Windows Support Forum

An Unexpected error accured Network properties

Q: An Unexpected error accured Network properties

HI all am trying to change the ip address manually. to unbrick my router. so I go to my network and click properties to change the tcp ect. and the famous Unexpected error accured pops up. I try all the regsvr32 ect. stuff and nothing works. I have windows 8 pro. those anyone know how to fix this?

Relevancy 100%
Preferred Solution: An Unexpected error accured Network properties

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: An Unexpected error accured Network properties

Is it really bricked or is it in limbo? I had one I thought was bricked, turns out i just had to wait it out to finish the firmware upgrade.

What model router is it?

Were you trying to install DD-WRT?

if you think that its just a configuration problem, then go to device manager and uninstall your network driver, then click on the action tab on top and click scan for hardware changes, and let windows reinstall them in their default settings. Now try your custom IP.

Did you do the 30-30-30 reset? (press and hold the reset button for 30 secs, unplug router, wait 30 secs, plug router in while still holding the reset, then after 30 more secs, release the reset.) Do not release the reset at any time, til the end.

If it has not completed the firmware upgrade then do not do the 30-30-30 reset until its done..

Brooklyn!

http://www.eightforums.com/network-sharing/25371-unexpected-error-accured-network-properties.html
Relevancy 17.63%

To start off my laptop is an Asus G VW-AS The wireless network adapter is an Atheros AR WB-EG The issue I m having only starts when I play an online game It s not a specific one it happens with all my games After about a few matches I will begin to experience terrible lag spikes Ranging from - ms sometimes even going up to over Usually the spikes are permanent I will jump to around ping and hover in that general number with it occasionally sliding back down to my normal only to immediately spring back up again After this begins to happen any application I use that uses internet internet browser skype etc also lags is severely slowed down This lag is never experienced on any other system using our wireless internet which makes me believe it is in fact my laptop s wireless adapter that is the problem Doing a windows troubleshoot on the adapter DOES fix it but it only fixes it for about to minutes and then I begin to lag adapter network Problems with wireless again Also the troubleshooter seems to only be able to fix it once If I try to troubleshoot the adapter again after already fixing it before that way the troubleshooter will tell me that it couldn t find anything wrong Manually restarting the adapter only works once as well Restarting the computer does not help the problem If the laptop is shut down for a few hours and started back up the adapter will work properly as long as I do not start a game Could anyone help tell me how to stop this from happening Do I need to get a new adapter or is there something I can do for the current one nbsp

A:Problems with wireless network adapter

Are you sure it is not an issue with your router? Also I dont know where to get Atheros drivers other than from the manufacturer (vaio, lenovo, etc) website. There are no official drivers
 

http://www.techspot.com/community/topics/problems-with-wireless-network-adapter.188964/
Relevancy 18.06%

First of all, sorry for my bad english.
My pc was working perfectly for about a year now, but these days it started having problems.
In the past few weeks it started disconnecting from the internet with the message: you don't have a valid
ip configuration. (It was working on the other pc connected to the router with lan, and on the notebook connected through wifi)
A reboot of the pc/router did always solve my problem in these situations.
Yesterday, my internet connection started connecting/reconnecting, and I couldn't solve it in any way, not with
a restart, and not with that network repair tool (idk it's name, I have hungarian windows). When it stayed connected for more then 2 seconds I was even able to load google, youtube, other sites,
I tried some solutions, like disabling the energy saver settings, setting it to 10mb half duplex, etc, but nothing worked, my
internet kept connecting/reconnecting.
Today I started my pc and it works perfectly.. Any ideas on how to solve it? I have the newest lan driver.

My mobo is Asrock 960gm-vgs3 fx.
 

A:Network keeps reconnecting

It appears that you manually configured the IP for at least one system.
DON'T do that - - make sure all systems use DHCP
 

http://www.techspot.com/community/topics/network-keeps-reconnecting.216254/
Relevancy 17.2%

Resolved DNS on other on one problem working laptop, DNS network computers problem on one laptop other computers on network working I returned home for the holidays with my laptop running Windows Enterprise -bit When I connect to the wireless network my laptop reports that it is connected with internet access but there is no browsing capability at all P P works Steam works but Chrome Firefox Steam browser give me DNS problem on one laptop, other computers on network working the quot This webpage is not available quot page telling me that the DNS lookup failed All the other computers at home are working happily My settings were to obtain an IP address and DNS server address automatically nslookup said DNS request timed out It didn t work with the wireless or the wired internet with an ethernet cable I set up another network by using my iPhone as a hotspot to make sure it wasn t an issue with all connections and my computer could browse just fine using the iPhone hotspot But it didn t work with my home connection The first thing I tried was to use openDNS s DNS addresses and with my home connection It still failed and nslookup gave the same quot DNS request timed out quot I reset the modem router it s combined unfortunately to factory settings and tried directly connecting with an ethernet cable again It worked for half a second and I opened webpages before it stopped and gave the DNS errors again I tried the wireless internet and it still didn t work I can connect to the modem router I made a guest network just to try it and I got DNS errors again When I reconnected to my primary network it worked for half a second again then stopped My next attempt to fix it was going to the cmd prompt and typing ipconfig release then ipconfig renew I restarted my computer and tried again but I still received the same errors with P P working like before I turned off my firewall and tried but it still didn t work Then I tried ipconfig registerdns restarted my computer and tried again Still didn t work At this point IPv has been disabled but it s still not working I restarted the modem router multiple times but it does nothing to alleviate the problem I have Microsoft Security Essentials did a scan nothing detected Also tried System Restore to two days ago got an error about how it failed Summary Using openDNS address Turned off IPv ipconfig release ipconfig renew ipconfig registerdns no virus trojan system restore failed None of the above worked Other computers at home using the ISP s provided DNS server work My computer works with other connections but not my home network Is there anything else I can try Thanks in advance nbsp

A:DNS problem on one laptop, other computers on network working

Fe3C said:





Summary:
Using openDNS address.
Turned off IPv6
ipconfig /release
ipconfig /renew
ipconfig /registerdns
no virus/trojan
system restore failed

None of the above worked.
Other computers at home using the ISP's provided DNS server work[1].
My computer works with other connections, but not my home network.Click to expand...

Good work. The router is fine[1] so don't fuss with it anymore.

Look for an updated driver for your WiFi adaptor.

On any working system run IPCONFIG /ALL and compare it to the results on the failing system. Look for missing Gateway address or IP address like 169.x.y.z

Some concern re failing system restore, but that's not a networking problem per se.

Work on a wired network first and then move to wifi.
Empty all manual settings on the LAN Connection (get properties, scroll to tcp/ip, click property button - - check ALL tabs; delete everything.

You should be able to PING 8.8.8.8 and then PING google-public-dns-a.google.com.
This shows the LAN adaptor has connectivity and DNS resolution.

Now do the very same sequence with your WiFi connection.
Disconnection from the router and then reconnect.
Inspect IPCONFIG /ALL again to look for valid IP addr, gateway addr and valid DNS settings. (not the OpenDNS you had before).

ping 8.8.8.8 ; if this doesn't work, then the WiFi settings are invalid even before DNS is an issue.
 

http://www.techspot.com/community/topics/dns-problem-on-one-laptop-other-computers-on-network-working.174565/
Relevancy 18.06%

Hey guys,

I had a quick question about a network at home.

My house is 15m tall and 9m wide, I want to network 3 computers (mine, wife, son).

Should I wire the house with Ethernet cat 5e cable and put a 100 base T switch?
Or
Just put a Wi-Fi access point and Wi Fi cards for the 3 computers.

I prefer wireless, but I?ve heard Ethernet would have slightly faster speeds due to less aerial interference.

Suggestions? Solutions? Thank you!
 

A:A network for home? Which one?

First of all... don't put a 100 base T switch anywhere but the backup bin. If you're going to bother wiring anything put in GbE as it's inexpensive now. Also, if you're going to bother with any wiring then I'd put in the best/fastest type I could find to future proof it as much as possible. Fishing cable isn't something you want to repeat in a couple of years.

To more directly answer your question, Wi-Fi will probably be fine for you depending on the distance from your WAP (wireless access point) and what your walls are made of. You'll also need to keep in mind any other Wi-Fi interference so the distance to your neighbors can have an affect. All that being said any modern WAP will be faster than a 100 base T switch under normal conditions when it comes to throughput (how much data you can move) - but worse when it comes to latency (how long a specific bit of data takes to get from one point to another). If you're playing games you'll want low latency. If you're just streaming content or moving files around then you just want throughput.
 

http://www.techspot.com/community/topics/a-network-for-home-which-one.213242/
Relevancy 17.63%

Ok so I do not know if this is the right forum or site to ask this question to be honest It applies to Linux though more applies to a networking issue So here is the problem I currently live in an apartment that has its own network that is given to them by their ISP So my router is getting its ip address from their DHCP server router and then I give out my own problem Apartment Network IP address via my own router So Im trying to be able to SSH into my machine or even just to remote desktop onto my Windows side I have my router set up accordingly and I can ssh into my machine when I am on their own network not my own but when I am away I cannot because Apartment Network problem my routers IP address is unique in the apartment complexes network Does anyone know a solution to this I was thinking a VPN into their network Apartment Network problem and then SSH into my own afterwords Problem is I m really not sure if this is a solution and if so How do I do it Thank you for your time I hope someone has a solution to my problem nbsp

A:Apartment Network problem

This is a STATIC route or PORT FORWARD problem and without the consent the apartment owner, neither are possible.

Your data flow is

Code:
ISP == Apt.router---Your.router---your.pc
Assume the Apt.router is at address 192.168.1.1
If yours is anything else, then your lan is isolated from the apt and you have great security.
* to get Public access (eg from work) to your pc, you need to
cross the Apt.router nat, get to your.router and port forward to your pc - - complicated.​If your.router is on the Apt.lan (meaning you disable DHCP in your router)
you are exposed to all the other apartments,
and still need port forward to your PC, and that requires a FIXED address assignment in the apt.router.​
IMO, the conclusion is this is non-trivial, has dependencies on the good will of the apt owner/tech support guy and requires extra diligence on your systems for security & privacy.
This would need (imo) to be more than just 'I want to play games on the Internet'
 

http://www.techspot.com/community/topics/apartment-network-problem.213209/
Relevancy 17.63%

So I'm in the market for a new wireless card for my desktop. The last one I bought was a piece of crap from the start. You don't generally see network card reviews. Was wondering what some good quality options would be.
 

A:Network card recommendations?

The best option would probably be a dual-band one that has 802.11ac support; if you've got an AP that supports the standard, it'd be worthwhile investing in that kind of card. They can be kinda expensive though (usually around $100 from what I've seen).
 

http://www.techspot.com/community/topics/network-card-recommendations.208722/
Relevancy 12.9%

I have a three month old Dell Dimension GHZ P Gig Ram and a gig SATA Hard Drive When I got the computer I used the files and transfer PC Relocator utility And had in Error system drives did hard Message: disk find Setup not your installed any a bunch of unwanted extras that came with it I m having a Satellite Internet system installed and they wanted a clean install of windows XP So I opened the owner s manual and got out the reinstallation disk and the problems began By the way Dell tech support s only response has been to say gee that s not right and would send a tech sometime after Christmas Anyway heres step by step what I did I boot to the Dell reinstallation disk Error Message: Setup did not find any hard disk drives installed in your system The windows setup screen appears and loads files The next screen says welcome to setup and offers three options -to setup XP press enters To repair XP press R to exit without installing XP press F I press enter and the following message comes up Setup did not find any hard disk installed in your computer Make sure any hard disk drives are powered on and properly connected And any disk related configuration is correct ect Press F to quit It dose this if I try repair also Dell had me check the connections to the HD and Motherboard They re good And debug the hard drive No luck Everything worked fine until I put in the reinstallation disk Any help would be welcome nbsp

A:Error Message: Setup did not find any hard disk drives installed in your system

During Setup, it will ask you if you need any extra drivers such as SCSI (or SATA in your case). If so, press F6. Now you are in trouble, because SATA drivers come on a floppy and new(er) Dells don't have a floppy anymore. Borrow a floppy-drive from another PC and install that in your Dell.
Setting up with the Dell disks, I'm not sure if they are RESTORE-disks or full XP-disks.
That may cause another problem.
 

http://www.techspot.com/community/topics/error-message-setup-did-not-find-any-hard-disk-drives-installed-in-your-system.18329/
Relevancy 13.33%

Hello everyone,
One fine evening while watching a movie, my laptop stopped responding and in frustration I switched off the laptop by holding the power button long enough to turn off. Next Morning it showed a blue screen and a message to recover my windows, which I failed to do and by the afternoon this message showed up. Detection Error on HDD0 (main HDD) and hence forth I've been unable to install windows from a USB drive since ( and I suppose) it is not able to read my HDD. I do not care about my data at all, I just want my laptop up and running. If I can have the data back it will be perfect otherwise I don't mind not getting my data back. I know for a fact that my Hard disk is fine because I went into command prompt, diskpart , and list disk, and saw the status of HDD as healthy, this is after the error (detection error on HDD). SO my question is: Why this error? IS there a problem in the motherboard? Why the error shows once and then doesn't show the next time and then comes up again.
 

A:2100: Detection Error on HDD0 (Main HDD); Lenovo Thinkpad Yoga

The error might be bad sectors, but I'm not sure. if my guessing is correct, you might have to get a new drive to replace. also you need to reinstall OS
 

http://www.techspot.com/community/topics/2100-detection-error-on-hdd0-main-hdd-lenovo-thinkpad-yoga.212391/
Relevancy 15.05%

I have a desktop computer that is running on Windows Xp, up until this morning, everything was fine, I could connect to the internet with no problem.

I turned on my computer, and it is telling me that the network cable is unplugged, as well as my network is not showing when i go to "my network connections"

But yet.....

I AM connected to my router, and there is no problem with the cord (I tried it on different computers as well as my Xbox 360 on the same port....so I know its not the router)....when I go into device manager, everything seems to be working correctly, and my network adapter and ethernet card both are marked as working properly.

Any ideas how I can fix this issue ?
 

A:"Network cable is unplugged" but its really not..

sadgyrl514 said:





I have a desktop computer that is running on Windows Xp, up until this morning, everything was fine, I could connect to the internet with no problem.

I turned on my computer, and it is telling me that the network cable is unplugged, as well as my network is not showing when i go to "my network connections"

But yet.....

I AM connected to my router, and there is no problem with the cord (I tried it on different computers as well as my Xbox 360 on the same port....so I know its not the router)....when I go into device manager, everything seems to be working correctly, and my network adapter and ethernet card both are marked as working properly.

Any ideas how I can fix this issue ?Click to expand...

Try rebooting,
 

http://www.techspot.com/community/topics/network-cable-is-unplugged-but-its-really-not.166539/
Relevancy 17.63%

Recently my Gbps has taken a serious nosedive I was around Gbps then it dropped dl Adapter 0.84Gbps Network The other computers on the network are getting Network Adapter 0.84Gbps dl great speeds it s just my computer My computer is running fine It s just the connection speeds This isn t just happening on WI-fi it s also happening when I plug in the Ethernet cord My network adapters are Broadcom n Network Adapter Microsoft Kernel Debug Network Adapter Qualcomm Atheros AR PC-E Gigabit Ethernet Controller NDIS They are all up to date And I use Avast internet security Also I ve cleaned the cache in both firefox and chrome browsers I ve also removed all but add block add-ons I m using AARIS modum router through time warner cable And again the Network Adapter 0.84Gbps dl other computers are getting great speeds always up of Gbps I even checked my Mom brand new computer which is getting upwards of Gbps I ve called TWC they sent someone the wires were a bit loose and it fixed everyone s laptop but mine Please help I m clueless here Here is the Broadcom n Network Adapter settings - auto mhz - Disabled n Preamble - Auto Antenna Diversity - Auto AP Compatibility Mode - Higher performance Bandwidth capability - b g MHz Bluetooth Collaboration - Auto BSS PLCP Header - Auto Short Long BT-AMP - Enabled Disable Uon Wired Connect - Disabled Fragmentation Threshold - IBSS g tm Protection Mode - Auto IBSS Mode - b Only Locally Administered MAC Adress - not present Minimum Power Consumption - Enabled Mixed Cell Support - Disabled Power Output - Priority amp VLAN - Prioroity amp Vlan Disabled Rate - Best Rate Roam Tendency - Auto Roaming Decision - Auto RTS Threshold - Shorti GI - Auto WMM - Enabled WZC IBSS Chaneel Number - MHz XPress TM Technology - Disabled nbsp

A:Network Adapter 0.84Gbps dl

Also I recently installed windows 8. I've tried all sorts of things to get it to work. Still no luck.
 

http://www.techspot.com/community/topics/network-adapter-0-84gbps-dl.210602/
Relevancy 15.05%

I have an installation folder on my main machine(Windows 7) with all my software. I have repeatedly run into issues connecting odd devices to my shared folder. This time I have installed Windows 10 Technical Preview (on a different machine) and don't understand why it tells me I can't access my own machine. After all these years, you would think user friendly would be a reality. It seems to be a coin toss as to which machines will connect. I hate never knowing I can access my own machine without issue. Here I am trying to install applications but yet I can't get to my storage location.

What is the secret to sharing your machine, so that anyone on the same network can access shared folders?

Edit: I always turn on "Network Discovery" and "File and Print Sharing".
 

A:Network connection issues (year after year)

I'm more brutal via the firewall:

set trust localhost and your lan ip's, eg 192.168.0.1/24

then add two rules for only the PRIVATE PROFILE

inbound allow tcp/udp from 192.168.0.1/24 to any for ports 137-139,445
outbound allow tcp/udp from any to 192.168.0.1/24 for ports 137-139,445
I use a much more complicate scheme in reality to enforce known vs unknown devices and to segregate WiFI from wired access, but that's just me.

In services, ensure these are running

Bonjour Service ( mDNSResponder)
fdPHost
Network Connections
Network List Service
Network Location Awareness

 

http://www.techspot.com/community/topics/network-connection-issues-year-after-year.208880/
Relevancy 13.76%

Hello,

I bought a R9 270X by XFX. My current specs are:

CPU: AMD A10 7800k (Standard Clock Speeds, Graphics Disabled)
RAM: 4GB (2 sticks, both working)
Motherboard: FM2, Gigabyte
PSU: 500 watt 80+ Cert Silver
HDD: 500GB WD Blue

So the issue is that the R9 card consistenly crashes out of all games no matter if I uninstall the drivers or reinstall them. I have tried removing the drivers through catalyst control center and through application based tools (DisplayDriverUninstaller). Once I uninstall and reinstall, it works, until the computer is restarted and then rinse and repeat.

Is this the card saying it is dying? If so it is a weird way of graphics card dying.
 

http://www.techspot.com/community/topics/r9-270x-doa-or-user-error.209138/
Relevancy 13.76%

Hi, I am having a problem with my external hard drive not working. My laptop cannot read the drive, it does not display properly in my computer and when I try to click on it it freezes and the message appears "Drive is not accessible, parameters are incorrect". I used it about three weeks ago and it was fine so I don't know what happened. I always make sure to safely remove it and am careful not to damage it. The light still still turns on when plugged in and I can hear it trying to work.

I really want to keep the files as they are from my previous laptop which died and do not have them stored anywhere else. My fault I know, but I had thought external hard drives were more reliable and I do not like the idea of cloud storage. Because of this I am hesitant to try CHKDSK. Is there anything else I can do to recover the files or fix the drive? If I take it to a computer technician would they be able to do it?
 

http://www.techspot.com/community/topics/external-hdd-error-not-accessible-parameters-incorrect.208079/
Relevancy 17.63%

So this thread is probably going to have a lot of information on it Timeouts Other Network Issues & but please don Timeouts & Other Network Issues t be discouraged I really really need help with some issues I ve been having and if someone could solve this for me that would be amazing So I ve been experiencing timeouts It seems I get timeouts whenever using Timeouts & Other Network Issues some sort of wired connection If I used an ethernet cable connected to my router I would get timeouts in several applications such as Minecraft and Teamspeak If I used Wireless I was fine So after lots of troubleshooting I couldn t find a fix so I ve been using Wireless ever since Lately however my wireless has been unusually slow not for everyone in the house just for me So what I did to solve the issue is I setup a D-Link DIR in my room to act as a Wireless Access Point I now get slightly faster speeds and bar connection rather than the bars I was getting previously Now I thought I wouldn t get these stupid timeout errors when connecting to this Wireless Timeouts & Other Network Issues Access Point turns out I still do On Teamspeak for example I will be talking to people and everything will be completely normal I won t lag or anything and then BOOM I get disconnected As I said no lag no warning I just get disconnected It s almost as though my router is randomly cutting me off So what I thought I d do was replace my primary router BoB Lite with the D-Link DIR and then use Wired connection because I assumed that the BoB Lite was causing the timeout issues Now I can t even connect to anything wired I must have changed a setting when troubleshooting or something But now I can t source internet from my laptop ICS and I can t connect to my original or new router wired The only way I can currently get internet is by using the DIR in my room but I still get timeouts when using applications such as Minecraft and Teamspeak So yeah multiple issues Firstly if I could just solve the timeouts then that would solve everything I could continue connecting to the modem in my room and everything would be fine OR is there a way I could someone reset all my network settings that I may have messed up when troubleshooting As I can no longer connect to any modem with a wired connection not even the DIR which could have solved the problem If anyone could help me out that would be GREATLY appreciated This is a really annoying issue and I ve tried to troubleshoot it myself for ages now but with no luck IF anything in this thread doesn t make sense to you please tell me and I ll gladly explain myself Additional Summarised Information My primary router is a BoB Lite my ISP is iiNet The modem in my room is a D-Link DIR I m using a NetComm N USB Adapter to connect to Wi-Fi I m using Windows Ultimate -bit Thanks very much Innug nbsp

A:Timeouts & Other Network Issues

Get a command prompt
enter PING 8.8.8.8

does that timeout or return timing values?
 

http://www.techspot.com/community/topics/timeouts-other-network-issues.207544/
Relevancy 14.19%

Ok, I have the question of `em all: at every game I try to unzip it gives me the crc error. I tried reinstalleing my windows, tested my RAMs(noo error found)reinstalled the drivers, nothing. I have the next output: amd a8 6600k 4gb ram r7 260X video card and gigabyte f2a55m-s1 motherboard. what should I do? also tried 7zip and latest version of winrar, and I get the memory managemet error
 

A:CRC error

Seems a bit odd you are unzipping games.. Do they unzip on other computers fine? If so, run a hard drive diagnostics utility like SeaTools. If you can't test on other computers, what are you trying to unzip specifically, games shouldn't be zipped...
 

http://www.techspot.com/community/topics/crc-error.207554/
Relevancy 14.19%

I've never seen this before. It just popped up a bit ago on my W7 pc.



What does it mean? I hope its nothing bad.
 

A:RAID error?

I found this in a google search http://h30434.www3.hp.com/t5/Desktop-Hardware/AMD-RAIDXpert-Warning-Errors/td-p/342708

I've known this pc has RAID on it because everytime it reboots/boots up it shows it. I've had this pc for two years this month & just hoping nothing bad is happening.
 

http://www.techspot.com/community/topics/raid-error.207317/
Relevancy 13.76%

My toshiba will not get on the Internet Google will come up and search but everytime it says Internet error
 

A:Laptop Internet error

Need specific; try looking in the cmd-> enter eventvwr.msc
 

http://www.techspot.com/community/topics/laptop-internet-error.207423/
Relevancy 13.33%

We just bought a monitor U2713H direct from Dell.

When we click on Factory Reset, the monitor doesn?t go back to Factory default setting.

-In particular, Contrast/Brightness: 0.
In terms of Color Setting, Input color Format: None.
Preset Modes: Movie

-Then we click on Reset Color Settings, Input Color Format: RGB, Preset Modes: Standard.

-When click on Factory Reset again, Contrast/Brightness and Color Setting come back to the same condition as above (Contrast/Brightness are 0, Input color Format: None.
Preset Modes: Movie).

-After we try to set up Contrast/Brightness to 50/50, we shut down desktop or turn off the power button on the monitor. Then we turn on computer or turn on power button on the monitor, Contrast/Brightness are 0, Input Color Format: None, Preset Modes: Movie.

-In summary, all menu settings can?t be saved by the monitor and Factory Reset doesn?t work.

Any idea would be highly appreciated. Thank you a lot in advance
 

A:Dell monitor U2713H error: settings can't be saved

What I would suggest is ask Dell if they would warenty it new it should have one and Dell should honor it. I would say they will but I have not done business with them in years, although the monitor I am using right now is one of theirs and is many years old.
 

http://www.techspot.com/community/topics/dell-monitor-u2713h-error-settings-cant-be-saved.207032/
Relevancy 17.63%

I was watching a tv show on nbc on my dell inspirion when I lost Wi-Fi. I checked and I had no signal and it wasn't even showing any available networks. I called dell and they ran me through a diagnostics. But once they saw my McAfee was expired and I wasn't paying extra for tech support they wouldn't help. Now it's not even showing Wi-Fi in my network connections just Ethernet. Please help
 

A:No Wi-Fi listed in network settings

IMO, McAffee isn't worth $$; ditch it and get WiFi running again.

THEN, choose { Avast or AVG } as your A/V product, DL & install.
 

http://www.techspot.com/community/topics/no-wi-fi-listed-in-network-settings.206899/
Relevancy 13.33%

Printer Problems in Windows XP sp3
Dell Personal Printer all in one A940
After trying to speed up an older computer running Windows XP
I may have cut off the Print Spooler (or it was already off ?)
I went back to Services dialog box & selected Print Spooler
I clicked the "Start" link at left of service list & got a message tgat said
"could not start print spooler service on local computer error 1068 The dependency service or group failed to start."
Printer is still not working can anyone help?
 

A:Could not start print spooler service on local computer error 1068

On Win/7 the dependencies are

HTTP

Remote Procedure Call (RPC)
DCOM Server Process Launcher
RPC Endpoint Mapper
Manually start each on and set to AUTOSTART as you go.
If one fails, then that is the root problem.
 

http://www.techspot.com/community/topics/could-not-start-print-spooler-service-on-local-computer-error-1068.206839/
Relevancy 18.06%

Hi Guys,
Recently my laptop keeps disconnecting from the wi-fi and I get an error saying unidentified network, I try to troubleshoot, it tries to reset the wireless network adapter and then the computer freezes. After I reset the laptop the problem can happen again within a couple of minutes. The driver software is fully up to date and I have no idea what else I can do. It is an Acer Aspire 5750G running Windows 7. Please help it's making my laptop almost completely unusable
 

A:Unidentified Network

Have you tried a wired connection does that work any better?
 

http://www.techspot.com/community/topics/unidentified-network.206848/
Relevancy 16.77%

I bought a ADSL Modem D-Link 2730U

We are connecting to the Modem via Laptop, PC, Phone,... at the same time.

I want to know how can I monitor network(Receive/Send) for each user who connected to the Modem.

Can I do such thing?
 

http://www.techspot.com/community/topics/monitoring-network-for-each-user-connected-to-adsl-router-modem.206910/
Relevancy 17.63%

My wireless is not working on my computer, just a couple months ago I reset my computer using the ISO file, now my computer will only connect to the Ethernet cable. The wireless switch is on. I see a button near the VAIO button that shows a computer with signals coming off of it, I've tried pressing it but it doesn't do anything. Computer specs: VAIO Song Laptop with 6 GB Ram and 1 TB HDD.
 

A:Wireless network not working

Sounds like when you reset your computer the proper wireless drivers were not re-installed. I would start looking for a solution for this. What Operating System does it have (Windows 7 / Windows 8.1/ etc.)? Have you tried to remove the Wireless drivers and re-install those? How about downloading and installing updated drivers from the VAIO website?
 

http://www.techspot.com/community/topics/wireless-network-not-working.206511/
Relevancy 17.63%

Hi. This is my first post on this forum.

I would like to ask some help regarding a problem with my internet connection. Connecting our separate PC and my Laptop to my LAN works perfectly fine but when I use our wireless network to connect my laptop and phone, that's when the problem occurs. I tried rebooting the router (unplugging the power switch, cables and such). And I also tried rebooting my phone and laptop but nothing works. I also tried looking at the router settings and tried changing the security settings to none to see if I can connect but still cant.
I just don't know what the problem is. Can you help me?
Thank you.
 

A:Can connect to LAN but not on wireless network

Hey strings12. A bit more info on your equipment would be helpful.
1) What is the OS (Operating System) and Service Pack Level of your laptop, SP1,2,3 ?. rIght click on My Computer icon and select Properties
2) Are we talking about one laptop here?
3)Is your router secured and what encryption method are you using, WEP,WPA or WPA2
 

http://www.techspot.com/community/topics/can-connect-to-lan-but-not-on-wireless-network.198872/
Relevancy 13.76%

Hi,
I am having a problem with my DVD hardware. Every time I put a disc in and open it in Explorer I get I a popup asking me to burn a disc (image file attached). I've tried going through all kinds of settings but nothing works. I am running Windows 8.1. Any help would be appreciated.

Thanks,

Verity
 

A:Burn Disc Error

That's autoplay setting for blank disk media.
 

http://www.techspot.com/community/topics/burn-disc-error.205054/
Relevancy 17.2%

I m been having some network problems and I m really not sure to make of any of them Networking was never my strong point but I ve done everything I m capable of to try and diagnose and fix this problem So I have comcast and use my own router The last router I had was a netgear and needed replaced because it would restart itself randomly multiple times a day and I d be without internet for about - minutes at a time Instead network wireless Help connection diagnosing problems of trying constantly to fix it I just bought a linksys C to replace it with This problem started happening a little over a month ago and it manifests is self differently every time and the symptoms just don t at up in any logical way before I go out and buy a new router I want to ask you guys Obviously I get disconnected for about a minute at a time but Help diagnosing wireless network connection problems I also have long periods of just EXTREMELY slow internet Help diagnosing wireless network connection problems speeds I m talking mbps down to less than mbps The odd part comes in when I do a speed test during one of these drops in speed The speed test says I m getting all mbps of my connection but the youtube video I ll be watching will need to buffer Pages will also load very slowly but not all of them Techspot Youtube and Outlook all take forever to load during these slow downs but others will load just fine I can t figure out if this is the router or comcast It problem seems like it is a router problem because of me getting disconnected from my router but during these slow downs I can still access my router just fine and my internet speed will be displayed correctly I only have one computer connected to wifi so I can t test other machines What do you guys make of this Also what are some tests I can run to help diagnose this problem I m at wits end about this whole thing The disconnects seems to have stopped when I changed channels in my router to channel but I m still having this severe slow down issue Also as a side note I recently upgraded to xfinity and it came with a new modem These slowdowns have been occurring on both modems which leads me to believe it is the router Here is what I ve tried doing so far gt upgrading firmware gt changing ethernet cables gt changing modems gt changing wireless cards gt adjusting channels gt using different types of security WEP MAC WPA gt reinstalling windows gt using different browsers nbsp

http://www.techspot.com/community/topics/help-diagnosing-wireless-network-connection-problems.204969/
Relevancy 13.76%

I decided to upgrade my old hard drive to a new hard drive. When I tried to install Windows Xp on the hard drive it wouldn't let me. I have a Dell Xps 400 bought back in 2006.
The new HD is a WE 1tb. The error codes comes when I try to install windows xp on the hd. It says

I got a blue screen error after clicking enter at the screen where there is no partition found:
Check to be sure you have adequate diskspace. If a driver is identified in the stop message, disable the driver or check with manufacturer for driver updates. Try changing video adaptors.

Check with your hardware vendor for any bios updates. Disable bios memory options such as caching or shadowing. If you need to use safe mode to remove or disable components. Restart your computer, press f8 to select advanced startup options, and select safe mode.

Technical information:

Stop:0x0000008E (0X0000005, 0XF7419CAD, 0XF6FF17E4, 0X00000000)

Setupdd.sys ? address f7419cad base at F73ED000, datastamp 48025277
 

http://www.techspot.com/community/topics/error-on-trying-to-install-new-sata-hd.204857/
Relevancy 13.76%

Hello all,
Windows 7 doesn't recognize my SSD drive. When I go to disk management, it shows a message to initialize it (image no.1) but when I press OK to do that, one another message appears and says: Data error cyclic redundancy check (image no.2). My computer windows doesn't show that drive and also when I went to cmd->diskpart, again it didn't show that disk to use of chkdsk /f command. How to solve the problem please?
 

A:Data error cyclic redundancy check ssd

I could to revive that disk in diskpart using PartedMagic in boot. I've uploaded a new image from that. The remained problem here is that I can't delete it there.
 

http://www.techspot.com/community/topics/data-error-cyclic-redundancy-check-ssd.204783/
Relevancy 17.2%

Here again since I have the most weird problem ever which I have never seen nor heard of before. I recently upgraded the OS on a friends computer, from Vista to 7. However now I can't seem to get the onboard ethernet adapter to work, it can't be seen in device manager nor anywhere else. I have tried to reset the bios (by removing the cmos battery) and I have also checked that the network adapter is set to 'Enabled'. Also, when I connect the cable to the ethernet port no lights go on, it doesn't give any sort of hope what so ever. The cable is ok, the "modem" is ok, and everything else seems to be in order and yet it doesn't work.

Computer in question:
HP Pavilion 6530sc
Non-default GPU and added 1Gb RAM
 

A:Solved: Computer doesn't recognize the network adapter

Whenever you install a new OS, always take note of the model of core system hardware like GPU, chipset, and ethernet/wifi (there are a few others that aren't as important, but nice to have updated) since those are critical to your computers core functionality.

However, a quick google search of your model yielded me with your PC's system specs. Your PC contains a Realtek RTL8201N ethernet adapter. So far I am unable to find a driver from Realtek itself and the HP driver is not Realtek, but instead nVidia nForce.

So after a bit of searching, I came across this: it seems to me that you have an old chipset from nVidia. I am not completely sure, but I think you have an ION chipset. Try installing this ION chipset driver (64 bit) ==OR== this ION chipset driver (32 bit) and tell me if it works. It should include the necessary component drivers and if it works, it means you have an ION chipset like I suspected.

Here are the specifications for your PC BTW.
 

http://www.techspot.com/community/topics/solved-computer-doesnt-recognize-the-network-adapter.204750/
Relevancy 13.76%

I am running Windows 8.1. After restarts, the laptop screen would be blank, yet the computer would load. If I hooked up a 2nd monitor, it would show the desktop on that screen but laptop screen blank.

Now when I try to type on that computer (I'm currently on a different computer) the typing of the keys is all off (none of the letters actually type what they are supposed to and some open up random windows and command prompts)

I am wondering if this is a virus. Currently running Malwarebytes. I did a system restore earlier and the problem wasn't solved.
 

A:Blank Screen error and typing issues

Could be a virus, but could also mean the motherboard is faulty. If still in warranty, RTM.

Does the laptop have a bootable CD reader? If so, then download and make a bootdisk of a small linux (e.g. puppy linux). Booting off that will virtually prove if the motherboard is faulty or not.
 

http://www.techspot.com/community/topics/blank-screen-error-and-typing-issues.204596/
Relevancy 17.63%

Sorry for that long title. Anyway, I was watching some YouTube videos when my wi-fi suddenly stopped worked. With this, I don't mean that I'm not catching signal from my router. I mean that my computer isn't receiving signal from any network. I don't know anyway to fix this, it never happened. I also won't buy a new computer. I got this on Christmas and I think that 7 months isn't that old. Also, the only tutorial I found doesn't applies to my computer (It was for a mac ). I have no idea of how to fix this and if you know, PLEASE HELP ME!!!!!! (If you are curious of how I am posting this, it works with Ethernet connection)
It's an ASUS computer with Windows 8.
 

A:My Computer Isn't getting signal from any Wi-Fi Network

Give the following a try and see if it helps:
Go to network sharing center - change adapter setting - click on wifi and then Diagnose this connection.

If this does not help, please let us know and we can suggest something else to try.
 

http://www.techspot.com/community/topics/my-computer-isnt-getting-signal-from-any-wi-fi-network.203822/
Relevancy 17.2%

I have a HP 650 notebook that is in ok condition with Windows 8 OS. It uses a Ralink 3290 wireless adapter for my wi-fi needs. For the past three months, my adapter has been vanishing! I look at the indicator in my bar, and it shows no device available. I open up the Network and sharing Center and select the change adapter settings, and the only thing showing is an ethernet connection that I don't use. I can sometimes get the adapter to return by using the find and fix devices option on the search menu, but sometimes even that doesn't work. I've even been getting the "This device cannot find enough free resources (code 12)" message for the Ralink PCIe from the troubleshooter. while I did see an article on this elsewhere, I had some trouble understanding it. Can anyone help me figure out why this is happening to my laptop? Thanks for any help you can provide.
 

A:Vanishing Network adapter and resuorce problem

You might need to update and install the laptops chipset drivers. And also try to update the driver for your wireless adapter from the manufactures site or from the HP support page.
 

http://www.techspot.com/community/topics/vanishing-network-adapter-and-resuorce-problem.203293/
Relevancy 16.77%

I have an internet connection that I have extended to my Brother in law's house, next door. At the moment, I basically have two LAN cables coming out of my modem/router, one going to my computer and another, extended cable, going to his computer.
However, he wants to use his spare modem/router, which has wifi capability, to allow his son to use his own computer downstair with only wifi.
Therefore, will there be any conflicts if I simply splice in a Lan cable or add a lan socket for the second modem/router (wifi location.) at the appropriate point along Lan cable 2? See diagram below.
If there is a possibility of conflict what would be an alternate wiring method?

Thanks,
Tom.
 

A:Adding extra wifi (modem/router) to my already extended network

Good drawing and this will work just fine. In fact, that's what I use to get access at the far end of the house. Here's the trick;

router#1(lan slot) ---- (lan slot) router#2 with wifi​
Notice that #2 WAN slot is left empty! This places all systems on the same subnet of the router#1 {what you are doing is making router#2 act like a switch which has wifi support (y) }

* Give router# a unique LAN address (If #1 is 192.168.1.1, then make #2 192.168.1.1) This will allow each to be manage via a browser connection
* in router#2 disable DHCP. This forces #1 to be the manager of the entire network and it will handout all IP addresses
Personally, I use the MAC addresses of my devices to enable router#1 to use Address Reservation of IP address for all devices attached to #1 (ie I map the devices to the range 1.2-> 1.10)

Then set the DHCP range in #1 to 1.100-1.50
These will be used for all devices attached (wired or wifi) to #2

Optional:
All systems can then use the firewall to allow or deny access for one or both halves of the network. EG: I permit access for 1-10 and 255 while denying 100-254​ALL system must allow the top-end address 255 as that is the broadcast address that is used to hand out the DHCP data.
 

http://www.techspot.com/community/topics/adding-extra-wifi-modem-router-to-my-already-extended-network.203204/
Relevancy 24.51%

I am in an office building with 40 or so tenants. The entire building is wired to one central network (let's call it main network) controlled by SonicWall where each office has one live network drop. The main network is set up in such a way that tenants can plug in their own switches and routers if they want more network connected devices in their office. The office building has a network printer connected to main network where tenants can print to it. However, when tenants have their own routers in their office you cannot really connect to the network printer that is connected to main network. Is there something I can port, bridge or set-up where they can print to it?
 

A:Printing to network printer on another network

I think that as long as the tenant's router is connected to the main network they should still be able to access that printer provided that the WAN IP address of their routers is within the IP range of the main network where the Network printer is attached.
 

http://www.techspot.com/community/topics/printing-to-network-printer-on-another-network.203071/
Relevancy 17.2%

Greetings my fellow technologists I have routers and internet connection and want to set up a second wireless network using the Dual 1 Internet Creation with connection Network DDWRT same internet connection for VPN purposes The routers are Router A TPLink TL-WR N non DD WRT flashed Router B Linksys E DD WRT flashed Router A is connected directly to my company s network and works fine broadcasting DDWRT Dual Network Creation with 1 Internet connection its own wireless network BENMAO BENMAO s Router A configuration settings are below LAN IP LAN MAC BC-D - - - - A WAN MAC SAME WAN IP WAN SUBNET WAN GATEWAY WAN DNS I have connected Router B to Router A via Ethernet cable Port on Router A to INTERNET port on DDWRT Router B but get no internet access on Router B using DHCP with Automatic settings I am willing to change any settings and experiment to produce connectivity on the second network BENMAOVPN but don t know what to change in the protocol settings and there is very little information on Internet DDWRT forums It seems there are multiple DHCP DNS and IP conflict issues which I don t really have a good grasp of here The DDWRT router Router B is highly customizable but I admit I don t know whether to set is as an Access Point Client Bridge Bridge Repeater or Ad Hoc but I know I do NOT want to quot cascade quot the routers into wireless network Also Router B probably needs to be set to function as a Router rather than a Gateway When I replace Router A with Router B its just plug and play everything works fine and I can actually put all my devices on a wireless VPN so setting up the wireless VPN is not the issue its just getting Router B to accept the signal from Router A So bottom line is I need to know how to set Routers A amp B to share the Internet signal from Router A to Router B and then have Router B broadcasting a DIFFERENT network Thanks for any help in advance nbsp

http://www.techspot.com/community/topics/ddwrt-dual-network-creation-with-1-internet-connection.202411/
Relevancy 12.04%

Hi I have an older PC which I gave to my mum It originally ran Vista but I bought and installed Windows Ultimate around weeks ago after it had been inactive for months It was running great but a couple of weeks ago it just started hanging for no real reason Also at startup it would say that the computer had not been shut down properly even if it had This was only when it was switched off at the wall not after checksum defaults loaded" replaced error battery after - "cmos a restart or when the PC was left plugged in and switched on She only "cmos checksum error - defaults loaded" after battery replaced uses the PC to look at You Tube and some webcams from her grandkids and that s it she s not very computer literate Initially I left Windows repair to run overnight but when I looked at it the following morning it was still in the repair screen so I assume it had hung I spoke to a local repair shop and they suggested I test the RAM test the hard drive and replace the CMOS battery The RAM and hard drive checks went without any errors and after I replaced the battery the hanging stopped I played with the computer all evening and shut it down as normal and switched it off at the wall Next day I thought I would start it up just to check it and I was faced with a quot cmos checksum error - defaults loaded quot message I thought that was strange but maybe the battery was dead so I swapped it over with one from my perfectly working desktop to try it out and my desktop worked fine but after shutting down my mum s one it had the same problem when power was pulled So battery was ruled out Incidentally I will say that I reset the BIOS date and time every time I was faced with the error following up with a save and exit It worked fine until I unplugged the computer I then moved on to the BIOS and set it back to default and the same again After this opened the case and used the jumpers to reset the BIOS to default again but no difference My mum will not leave it switched on at the wall constantly in case it self-combusts same with her washing machine TV lamps etc otherwise I would just do that and ignore it Is there anything else someone can suggest that I try System Shop bought by Mesh Motherboard is an ASUS PSN-E SLI gb Ram - samsung gb hard drive - ASUS Thanks for any help nbsp

A:"cmos checksum error - defaults loaded" after battery replaced

I must add that the PC is the same as when I bought it new from the shop, except for adding a Creative Labs sound card (approx 2012) and installing Windows 7 (around 6 weeks ago). All Windows updates are downloaded and installed.
 

http://www.techspot.com/community/topics/cmos-checksum-error-defaults-loaded-after-battery-replaced.201304/
Relevancy 14.19%

I recently receive a pop out error message everytime I start up my laptop. Can anyone please advise? Thank you! The error message is below.

There was a problem starting
C:\Users\XXX\AppData\Roaming\newnext.me\nengine.dll
The specified module could not be found
 

http://www.techspot.com/community/topics/rundll-error.201803/
Relevancy 17.63%

Hello, totally noob to phone networks. I am going to have a US version of Galaxy S5 and order an extra battery for it on mpj. Can I use both of them on overseas carriers? Thank you for any kindly help.
 

A:Can I use my phone on overseas network?

The specs shown here declare

Also known as Samsung GS 5
Available as:
Samsung SM-G900F - for Europe
Samsung SM-G900I - for Asia
Samsung SM-G900K/G900L/G900S - for Korea
Samsung SM-G900M - for Vodafone
Samsung SM-G900A - for AT&T
Samsung SM-G900T - for T-Mobile
Samsung SM-G900V - for Verizon
Samsung SM-G900R4 - for US Cellular
Samsung SM-G900P - for Sprint
​General 2G Network GSM 850 / 900 / 1800 / 1900


So yes, it is compatible with EU providers. Caution however; your current provider will bill you for roaming charges. When in Europe, I always buy a local SIM card and fund it with enough credit to last the trip - - that will also give you a local phone number. If you book theater events or need to call for reservations, they will be more likely to answer the phone.
 

http://www.techspot.com/community/topics/can-i-use-my-phone-on-overseas-network.201690/
Relevancy 17.2%

I ve read all I can about this online and tried everything I ve come across Since upgrading my internet same ISP the upload on my computer not any others on the network It ranges from megabits to If I boot into linux I get but that s far from the megabits the other Slow Problem: Bizzare Infuriating Upload Network computers on the network get But the strange thing is the problem seems to affect only certain programs My browsers are affected as the internet tests I do are from the browser OBS streaming software will not upload more then megabits about k However utorrent can completely max out my upload I ve tried stopping the WMI service and Bizzare Infuriating Network Problem: Slow Upload I have no traffic shaping software installed Here are my specs Operating System Windows Pro -bit CPU Intel Core i K GHz C Haswell nm Technology RAM GB Dual-Channel DDR MHz - - - Motherboard MSI Z -GD GAMING MS- SOCKET C Graphics SyncMaster x Hz LG TV x Hz MB NVIDIA GeForce GTX Gigabyte C Storage GB Samsung SSD EVO GB SSD C GB SanDisk SDSSDHP G SSD C GB TOSHIBA DT ACA SATA C GB Seagate Bizzare Infuriating Network Problem: Slow Upload ST DL - VT SATA C Optical Drives PIONEER DVD-RW DVR- L Audio ASUS Xonar DGX Audio Device Various Network info You are connected to the internet Connected through Killer e Gigabit Ethernet Controller NDIS IP Address Subnet mask Gateway server Preferred DNS server DHCP Enabled DHCP server External IP Address Adapter Type Ethernet NetBIOS over TCP IP Enabled via DHCP NETBIOS Node Type Hybrid node Link Speed Bps Computer Name NetBIOS Name CALVINS-PC DNS Name Calvins-PC Membership Part of workgroup Workgroup WORKGROUP Remote Desktop Disabled Console State Active Domain Calvins-PC WinInet Info LAN Connection Local system uses a local area network to connect to the Internet Local system has RAS to connect to the Internet Wi-Fi Info Wi-Fi not enabled WinHTTPInfo WinHTTPSessionProxyType No proxy Session Proxy Session Proxy Bypass Connect Retries Connect Timeout ms HTTP Version HTTP Max Connects Per Servers INFINITE Max Connects Per Servers INFINITE Max HTTP automatic redirects Max HTTP status continue Send Timeout ms IEProxy Auto Detect Yes IEProxy Auto Config IEProxy IEProxy Bypass Default Proxy Config Access Type No proxy Default Config Proxy Default Config Proxy Bypass Sharing and Discovery Network Discovery Enabled File and Printer Sharing Enabled File and printer sharing service Enabled Simple File Sharing Enabled Administrative Shares Enabled Network access Sharing and security model for local accounts Classic - local users authenticate as themselves Adapters List Killer e Gigabit Ethernet Controller NDIS Connection-specific DNS Suffix Home Connection Name Ethernet NetBIOS over TCPIP Yes DHCP enabled Yes MAC Address D - D- E-F - B- IP Address Subnet mask Gateway server DHCP DNS Server Network Shares Misc D Misc Finished Torrents D Downloads Finished Torrents Games D Games Games E Games Torrents E Downloads Torrents Video D Video Video E Video Current TCP Connections C Program Files x Google Chrome Application chrome exe C Program Files x NVIDIA Corporation Update Core NvBackend exe C Program Files Box Sync BoxSync exe C Program Files Hola app hola exe C Users Calvin AppData Roaming uTorrent uTorrent exe C Windows Explorer EXE G Program Files x Nightly firefox exe G Program Files x Razer Razer Game Booster main exe G Program Files x Samsung Magician Samsung Magician exe G Steam Steam exe hola svc exe hola updater exe KillerService exe lsass exe NvNetworkService exe nvstreamsvc exe services exe svchost exe svchost exe svchost exe System Process System Process wininit exe nbsp

A:Bizzare Infuriating Network Problem: Slow Upload

I figured it out, the Killer NIC on my Z87GD65 mobo was not compatible with NetLimiter. Uninstalling it fixed the problem
 

http://www.techspot.com/community/topics/bizzare-infuriating-network-problem-slow-upload.201410/
Relevancy 17.2%

Hello, I'm new here. I'm trying to fix my sons Asus laptop. it won't connect wirelessly but will connect via ethernet cable. device manager has exclamation point beside network controller. I cannot download drivers for it. can you help?
 

A:Asus X53E network controller issue/no wireless

"I cannot download drivers for it"... Why? Can you get the driver from here:
http://support.asus.com/download.aspx?SLanguage=en&p=3&s=114&m=X53E&os=&hashedid=mDFYFQWEpTitMwA6
If the driver won't install, the Wifi card may be bad... Something that doesn't happen very often
 

http://www.techspot.com/community/topics/asus-x53e-network-controller-issue-no-wireless.201175/
Relevancy 14.19%

Hello,

When I play BF4 I get a direct X error after awhile claiming that it cannot allocate any more memory and that I should use a GPU with at least 512 MB RAM.

I have tried to search around but cannot find a solve really.

Some people advise to disable the Intel integrated Graphics in the device manager but no one can confirm if it works or not so I am hesitant to try it...

I have updated drivers for Dx and the GPU without resolve, also tried reinstalling them.

It has not happened for any other games so far but the only game that really demands any memory I play is BF4 ... I will try with Crysis 3 or something similar demanding to see if the error happens there too.

Anyone have any advices?
 

A:DirectX error for AMD R9 290 Tri x 4GB

Obzoleet said:





Hello,

When I play BF4 I get a direct X error after awhile claiming that it cannot allocate any more memory and that I should use a GPU with at least 512 MB RAM.

I have tried to search around but cannot find a solve really.

Some people advise to disable the Intel integrated Graphics in the device manager but no one can confirm if it works or not so I am hesitant to try it...

I have updated drivers for Dx and the GPU without resolve, also tried reinstalling them.

It has not happened for any other games so far but the only game that really demands any memory I play is BF4 ... I will try with Crysis 3 or something similar demanding to see if the error happens there too.

Anyone have any advices?Click to expand...

Well in all technicality the game should not be defaulting to the integrated unless you have your monitor hooked up to the on board connectors so I would not worry about that. If its reading as a memory problem in BF4 then it maybe a problem with BF4 drivers. I have not played in a few days on my 290X setup but an update was just downloaded I noticed a day or two ago.

Have you tried changing over from directX to Mantle and seeing if that helps or vice versa?

Also try the latest Beta 14.2 because it makes things alot more stable than 14.1 was in terms of Mantle at least.

See what happens after trying this, the Intel Integrated should not be interfering so I would not worry about that.
 

http://www.techspot.com/community/topics/directx-error-for-amd-r9-290-tri-x-4gb.200757/
Relevancy 13.76%

Hello I got a weird one for you guys and I literally have tried everything can think of so I am hoping someone has some new fresh ideas I have a Dell Latitude E that can no longer connect via wired or wireless connections Both adapters display yellow exclamation marks next to them and in the properties of both adapters says Windows cannot install because the drivers are not recognized Error Both adapters are also missing from the adapter page in network settings I have download the most recent versions of the driver and installed no luck I have downloaded previous version of the driver from dell and installed no luck I download the driver directly from Intel and installed no luck Tried a BIOS update nothing Tried to reset to defaults nothing So I decided I would rebuild the is one Windows 31, not NICs weird Error this working 7 machine and SURPRISE that worked for a week and then the problem started again So my first thought is well maybe its a bad motherboard so I swapped the HDD with another Dell E boot it up and NICs not working Windows 7 Error 31, this one is weird both connections are working In the laptop with the drive from the bad laptop it can no longer connect now so the problem is related to windows and follows the drive Does anybody have any idea whats happening hear I am all tapped out of ideas Thanks let me know if you need any additional info Dell E Windows Enterprise auretsky vailresorts com nbsp

A:NICs not working Windows 7 Error 31, this one is weird

"so the problem is related to windows and follows the drive"... Re-install Windows on this drive. Error 31 relates to a bad driver that may be reflected in the device manager
 

http://www.techspot.com/community/topics/nics-not-working-windows-7-error-31-this-one-is-weird.200795/
Relevancy 17.2%

We have a problem with the connection to our server. The server disconnects randomly from minutes to hours all day. I am at a remote location and connect via logmein to a local pc at the servers physical location to remotely control and connect to the server. A month or so ago the connection would drop every few minutes. The staff at that location replaced the switch and had the ISP tech check out the router. No problems were found. I think it is a problem with the server itself but don't know what it could be. Typically I can go through the login process and reconnect. I'm sorry I can't be more specific about the equipment since it is 40 miles away. Any suggestions on troubleshooting? Remotely?
Clearly I'm not a network guy.
Thanks for any help or direction
 

A:Network connection to server disconnects constantly

The usual suspects are:

(for DSL connections only) missing or faulty line filters
need to update the router/modem firmware at your end
packet reassembly overflow(a)
(a) very techie, but the solution is easy; see this description
 

http://www.techspot.com/community/topics/network-connection-to-server-disconnects-constantly.200706/
Relevancy 14.19%

The web server in my IIS has the Default web site stopped. When I hit start, I get an error message
there was an error while performing this operation.
Details:
the process cannot accdess the file because it is being used by another process. (Exception from HRESULT: 0X80070020)
The site bindings are:
:*:57772 (http),*:443 (https), 808:*(net.tcp), *(net.pipe), locathost (net.msmq), localhost (msmqformatname)
Can anyone point out what is wrong?
 

A:IIS error

That error is saying
1) one program (process) as a file open
2) another attempted to modify or delete it

A most common case is when a process is running and the current directory is \temp\foo\bar

and some process is attempting to delete foo
 

http://www.techspot.com/community/topics/iis-error.200665/
Relevancy 31.39%

When I am accessing wifi network I get dns failed error message. what is the problem? pls help
 

A:DNS failed error in WiFi network

Can you connect using a wired connection?
Get a command prompt and enter
ipconfig /all >myTCP.txt​then open that file, copy the contents and paste into your follow-up
 

http://www.techspot.com/community/topics/dns-failed-error-in-wifi-network.200577/
Relevancy 17.2%

Hello. I am a complete newbie to server administration. At my current job, I have been tasked with setting up a deployment server. The server is a Windows 2008 server and is not connected to the Internet. The server is a domain controller on its own domain (different from the main domain my job uses). How would I connect this server to the Internet without disrupting other users on the network? By disrupting, I mean connecting to my server instead of the main server for DNS and DHCP. The server has Active Directory Domain Services, DNS, DHCP, and WDS roles set-up.
 

http://www.techspot.com/community/topics/connect-server-to-the-internet-without-disrupting-other-computers-on-network.200167/
Relevancy 14.19%

I am also getting a bad image error it pops up on six or 7 start ups ive run mbam disk clean up disk defrag scan disk but its still there. ive looked over many posts and tried to follow others instructions but im still missing something
 

A:Bad image error

Jarrow, what are your computers specs?
 

http://www.techspot.com/community/topics/bad-image-error.199835/
Relevancy 17.2%

Recently my network storage device has stopped me from accessing folders with the exception of music. All my pictures for the last 11 years are on it and not backed up anywhere else. Cannot find manual and have done reset but cannot remember URL to setup or admin username and password. Doesn't seem to be online and Edge is giving me no help whatsoever.
 

A:Edge DiskGo 3.5" network harddrive

Ouch if this is a NAS Device or has an IP you can use an app called FIng for your mobile device to find its ip so you can put it in the browser and get to the gui site. If you cant try fing you can use angry ip scanner for winwdows to find its ip.

If you want to try and recover files I would try recuva to obtain any data that has been lost. I am not sure if it is lost or just changed in the mapping.

As most guys will tell you here its very good idea to have three forms of back up. Local, external and online. If you don t know how to use fing or any of the software I duscusses please let me know. I will have links to the downloads below. Goodluck.

http://angryip.org/w/Download
For Fing just type in Fing in either google play or Itunes.
For Recuva: http://www.piriform.com/recuva/download/standard
 

http://www.techspot.com/community/topics/edge-diskgo-3-5-network-harddrive.200015/
Relevancy 17.63%

Hi I m having a problem that I gather is fairly common with Windows machines but I haven t been able to find the same case in other threads nor a workable solution among similar cases I have two Windows computers the main laptop on Win and a hybrid tablet on Win I would like drive Win8.1 Trying connect to network to a for both devices to be able to access each other via my home network So for both devices I ve set the network settings to home private I turned on file sharing and discovery and even joined both devices to the same homegroup The end result is that my Win tablet can access my Win laptop both through the homegroup and through direct network access The problem is that my Win laptop cannot do either of those with regard to the tablet in all Trying to connect to a Win8.1 network drive cases I get the network error message that I cannot access the location and should check it for spelling To try to solve this issue I have attempted -Turning off the Windows firewall on my Win tablet -Looking around to see if I could find my Win tablet to unwittingly belong to some sort of domain have not been able to figure that out The odd thing is that I also tried to test out the network by setting up iTunes on both devices and setting them to share their music libraries via home share and sure enough both devices could access each other s libraries Similarly I was able to access my tablet from my Win laptop through a Remote Assistance invitation Would very much appreciate any advice I can get here Thanks in advance nbsp

A:Trying to connect to a Win8.1 network drive

Which Windows 8.1 tablet is this Pro or RT? RT your can't not x86 or x64. Pro you can. Disable Homegroup. Use Workgroup and call it something other than Workgroup like: DANET for example
So do this on laptop and tablet. On laptop make sure the folder is shared out to you the admin or your name example Dan.

So you should have local account on your system called Dan with admin rights. Back on the tablet side you need to create a local account. Did you setup Microsoft account so your login with that account only. You need to create a local account and start using that. It can be done to access the Microsoft account while being on local account while your at home.

If away from home then sign on to Microsoft account to access the cloud features. Or still use the local account and have Microsoft account to access store and skydrive (aka onedrive).
 

http://www.techspot.com/community/topics/trying-to-connect-to-a-win8-1-network-drive.199866/
Relevancy 13.76%

My graphic card showing error on Pc starting
When I start the computer it restarting with this error vt-x1550pci256

this error showing on top left on screen what I do Now ?

if u want more information let me know.
ps : sorry for my bad english
 

http://www.techspot.com/community/topics/ati-radeon-x1550-error-showing.199875/
Relevancy 17.2%

Hello Everyone !
Right now I am using a broadband connection as my Internet connection and I have a dsl modem which is wi-fi capable. Two of my frnds share the same Internet connection through wi-fi. The problem is whenever any of us watching YouTube videos or downloading something, the whole speed is consumed by that particular computer. I know that many new modems have the capability to limit the bandwidth usage these days but mine is an older one. So I was wondering if there is any way I can limit the bandwidth for each computer.
Thanks !
 

A:How to limit the bandwidth for each computer on a wireless network?

You have to have a modem you can log into an has that type of feature. If you are wired into the network, you should be able to limit the wireless bandwidth and keep your wired bandwidth up. Normally go into the modem, go to setting and wireless setting to limit it.
 

http://www.techspot.com/community/topics/how-to-limit-the-bandwidth-for-each-computer-on-a-wireless-network.193175/
Relevancy 13.33%

How serious is this? I'm running on a Dell laptop with a Intel(R) ICH9M-E/M SATA AHCI Controller.

It is saying that I should back up all of my important files because of possible hard drive failure.

PLEASE HELP? I don't know how to fix this because I don't know what it means.
 

A:Hard drive is reporting a Smart Event error message

It telling you your hard drive is on its way out. You can try running a check disk and see if that helps. But to be on the safe side you should back up your personal files.
 

http://www.techspot.com/community/topics/hard-drive-is-reporting-a-smart-event-error-message.199432/
Relevancy 13.76%

Hi All,

I have made a new rig and wanted to transfer the video/music from old IDE hard drive.

I have tried two IDE to USB convertors and when I try to access my old hard driver from My Computer I receive the error "Format Disk"

I have restarted my PC and now it doesn't even detect it!
 

A:Format Disk Error with IDE to USB Converter

Sounds like the partition table is messed up on the IDE hdd. The data is still there, but windows just cannot figure out how to "read" that drive. More than likely you'll need a 3rd party application to view the data on the drive and copy it accordingly. I use UFS explorer in the shop to recover data from customers' hdds http://www.ufsexplorer.com/download_std.php There are many other 3rd party data recovery programs/application out there, just google it & I'm sure you'll find one that fits your needs.

Post back, Hope this helps!!
 

http://www.techspot.com/community/topics/format-disk-error-with-ide-to-usb-converter.198116/
Relevancy 18.06%

Hi there Tech Forum thanks in advance for your help - I have a question about a LAN and stuff There is a modem and a wireless router with LAN ports In one of them there is conected also a switch Network LAN Question with LAN ports - Some weird things have been going on I always get a wireless connection so LAN Network Question no problem there Issues appear with the wired network On one hand I had many times an unidentified network a x x x ip and no LAN Network Question network Nothing changed in configuration on my box or the router and got to connect at MB s while if connected through wi fi I got LAN Network Question more than MB s From a moment on again unidentified network and no signal in the adapter a yellow light would blink quick So now after touching the cable and a little bit of despair not driven to the computer by the way I have a full conection by lan and by wi fi both at a good speed AND weird for me a green light on and the same yellow blinking - So main questions are - What does the green light ON not blinking means - Could there be a difference due to the cable manipulation - Is there a gost inside my router D Thanks a bunch to all of you I try my best to understand computers so now I am happy with the connection but curious on the rest - Regards nbsp

A:LAN Network Question

How new are these devices? Are you using new 'patch' cables? Is DHCP running on only one of the devices? Seems weird that "touching the cable" caused a change.

1. The LEDs differ, but usually one signifies a connection [on/off] and the second signifies activity [blinking]
 

http://www.techspot.com/community/topics/lan-network-question.199370/
Relevancy 12.04%

Hey,
I woke up on May 10th 2013 & when it started up my laptop I saw this.




I was a bit scared, but I decided to run the following programs:
Mbam (AV)
DSKCHK
Disk cleanup
Disk defragmenter
Scan disk (SCR-scanow)
AVG tuneup
AVG (AV)
MSE (AV)
Restore point.
I do not know what happened, but I have posted on several other forums, but no answer.
Thanks,
Danawesome.
 

A:Repeated "bad image" error (think it's something to do w/laptop)

Did you fix this?
 

http://www.techspot.com/community/topics/repeated-bad-image-error-think-its-something-to-do-w-laptop.198178/
Relevancy 17.2%

A colleague at work would like to set up either a SHN or a SBN. What is the best way to go about this? Would it be best to be safe to be cloud based? What equipment is needed etc...?

This will take some discussing, so please ask any questions you need. The intention would be for two/three people to access the information on the network initially. A printer will be shared on the network, allowing scan to email. Laptops would be used to access the network from external sites, this is why I'm thinking of going the cloud based route, so they can log on and access the server from anywhere in the world...

Any help/guidance is appreciated.
Thank You!
 

A:Setting up a small home/business network

Yes, you can consider the Cloud as a solution for access, BUT . . .
it also brings with it issues like:

security
privacy
backup
ownership
You should start reading about these issues before committing to this solution.

One alternative would be a NAS device connected to your router. Putting your modem, router and NAS on a UPS power system would allow (with proper configuration) external access and you have total control, of all of the issues above.
 

http://www.techspot.com/community/topics/setting-up-a-small-home-business-network.198198/
Relevancy 18.06%

I woke up this morning and my laptop is having trouble connecting to the internet However internet worked on other laptops and devices so it must be the laptpo s problems I Network Unidentified looked up the problem and I eventually get to a point where I figure out I need a new ip After typing ipconfig renew it says Windows IP Configuration No operation can be performed on Wireless Network Connection while it has its media disconnected An error occurred while renewing interface Wireless Network Connection Unidentified Network The sup port for the specified socket type does not exist in this address family No operation can be performed on Bluetooth Network Connection while it has its m edia disconnected No operation can be performed on Local Area Connection while it has its media di sconnected I don t know what to do now Please help Windows IP Configuration Host Name Username Primary Dns Suffix Node Type Hybrid IP Routing Enabled No WINS Proxy Enabled No Wireless LAN adapter Wireless Network Connection Media State Media disconnected Connection-specific DNS Suffix Description Microsoft Virtual WiFi Miniport Adapter Physical Address E - -FE- A-B - DHCP Enabled Yes Autoconfiguration Enabled Yes Wireless LAN adapter Wireless Network Connection Connection-specific DNS Suffix Description Atheros AR b g n WiFi Adapter Physical Address C - -FE- A-B - DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe d ca Preferred Autoconfiguration IPv Address Preferred Subnet Mask Default Unidentified Network Gateway DHCPv IAID DHCPv Client DUID - - - - - F-BD-FD- - A-B - F- -BC DNS Servers fec ffff fec ffff fec ffff NetBIOS over Tcpip Enabled Ethernet adapter Bluetooth Network Connection Media State Media disconnected Connection-specific DNS Suffix Description Bluetooth Device Personal Area Network Physical Address - - - -A -DA DHCP Enabled Yes Autoconfiguration Enabled Yes Ethernet adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Realtek PCIe FE Family Controller Physical Address - A-B - F- -BC DHCP Enabled Yes Autoconfiguration Enabled Yes Tunnel adapter isatap BEE - C- F F- -D B D BD Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter TO Adapter Media State Media disconnected Connection-specific DNS Suffix Description Microsoft to Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled YesAnd here s the ipconfig all just in case nbsp

A:Unidentified Network

Wireless? Your laptop isn't getting an IP address is the cause of your issues. Find out of the router has enough allocation.
 

http://www.techspot.com/community/topics/unidentified-network.198148/
Relevancy 17.63%

Hi I What to fail my workgroup causes network have four pc s connected through a GX-D ASUS switch which is now a few years old Two of the pc s have just been upgraded to windows the other two are on windows Also into the switch goes my BT broadband router and my network hp printer n Suddenly I am losing the complete network during normal use Instead of having green lights on my switch one of them goes amber and another has no light on at all If I unplug the switch from the power and then power back up all the What causes my network workgroup to fail lights go orange What causes my network workgroup to fail and then turn to green and the network comes back on This has never happened before until today and it has happened twice really frustrating I am not very techy and think the switch has became faulty Should I go buy a new switch or might it be something else Need it explaining in layman terms please as I don t have a clue Thanks for your help nbsp

A:What causes my network workgroup to fail

Hi Shelley123. If your router has at least 4 Ethernet ports at the rear, there is no need for a switch as you have 4 pc's. If your "router" only has 1 Ethernet port, what you have is a modem. Normally, your Internet signal comes in and goes to a modem first, and if you have more than 1 pc or devices that need wireless connectivity,you would connect a wireless router to that single modem port and connect your 4 pc's to the 4 ports found on most routers.If you had at least 5 devices that need to be connected by Ethernet cable, you would use a switch which you would connect to one of your router's ports, then connect the fourth pc and any other Ethernet device to one of the 4 or more ports on the switch. Are you sure you are using a switch and not a hub? Could you tell us what other hardware you have in your network besides your 4 pc's which you connect by Ethernet cable?
 

http://www.techspot.com/community/topics/what-causes-my-network-workgroup-to-fail.197556/
Relevancy 17.2%

If I'm able to, how would I go about running a network hub from an existing port on the router?

I.E. Modem->Router->PCs/Hub->TV/PC

In theory I'm trying to run a wired connection to my room and have the ability to have my PC/TV and any other devices connected to the network physically, my wireless strength isn't exactly good and it's very inconsistent at best when it comes to my internet speeds makes it a bit harder to watch Netflix/Play games.

Any insight would be wonderful!
 

A:Question about a home network using a Linksys WRT54GS2

Modem > Router >

Then use a LAN port on the router to connect to a LAN port on the hub.
 

http://www.techspot.com/community/topics/question-about-a-home-network-using-a-linksys-wrt54gs2.197409/
Relevancy 17.63%

Networked for years in XP machines.

I read help files how to but, could not make it work.

My w8 win wxplorer list shows under Network the VISTA LAPTOP. When I click on it it asks for user name/password but, what name & password?.

I naver had any name/password for my networks.

Any body knows what does it refere to?
 

A:Failed to network w8, xp & vista

Hey nichos. Was a name and password used when this Win8 system was first set-up. When I first unpacked a WIN8 laptop, it threw me for a loop as it requires a username and password to unlock it.
 

http://www.techspot.com/community/topics/failed-to-network-w8-xp-vista.197366/
Relevancy 17.63%

I am stuck Also I apologize in advance if this is not in the right forum I am trying to work on a friend s Windows desktop PC Dell Inspiron at my house but I cannot connect to my home network or the internet to download network Cannot or to PC connect internet malware scanners removal tools updates to MBAM etc First I was trying with a wireless adapter that it known to be good The network sharing center would say it was connected to the network but there was no internet connection Then I tried plugging in an Ethernet cable The network sharing center just kept saying quot searching for network quot but never would connect I tried disabling then re-enabling the network adaptor and I reinstalled the driver Networking is not my strong suit so is there some setting I may be overlooking It appears the PC on which I am working is already part of a homegroup do I need to leave that group then try to join my existing one set up through my own Win amp PC I don t care about sharing files across Cannot connect PC to network or internet the network in fact I prefer not to in case this thing really is infected I just want internet access on this machine Could some sort of malware be blocking access I sort of doubt this since it was working fine at their home before they brought it to me I could not find any router settings or firewall entries that appeared to be blocking access ZyXEL PK Z DSL modem router provided by CenturyLink Do I need to call my ISP tomorrow Thanks again this community has always been helpful to me nbsp

A:Cannot connect PC to network or internet

Make sure the adaptor isn't set to 'share connection'.

Try using a static IP.
 

http://www.techspot.com/community/topics/cannot-connect-pc-to-network-or-internet.197294/
Relevancy 13.33%

Hi,

I have Windows XP SP3 installed on my desktop and suddenly my LAN/NIC is not receiving and sending packets from my network. The DHCP Client Services and TcpIP services wont start it gives error from the above.

From the device manager of non-plug and play drivers, the tcpip protocol driver, ip network address translator and netbios over tcpip has exclamation point. When I uninstall the drivers and start the services the connection is established but when I shutdown/restart the PC it will came back again the issue.

AFD is running

Below drivers are present in system32\drivers folder.

afd.sys
tcpip.sys
netbt.sys
Any ideas?
 

A:DHCP Client Service Won't Start - Error 1068

Hello,

I update the system and the LAN driver but still the issue exist.

I copy the netbt.sys from a working machine and paste that to the non-working machine. Same problem.

Is there other way resolving this issue aside from repairing or fresh install of the OS?
 

http://www.techspot.com/community/topics/dhcp-client-service-wont-start-error-1068.197233/
Relevancy 13.76%

Hello all!
I regularly have the folllowing line appear when my bios starts up -CMOS checksum error defaults loaded. I am having a problem about CMOS Checksum Error, every time I turn on the computer it will wait about 30 secs before the first beep. Then the CMOS checksum error occur. Some days ago I had changed my battery after that this problem occurs. Please help me. I have a snapshots of the same problem.You can check here: http://wealthamplifier.in/images/cmos1
 

A:CMOS Checksum Error - Defaults Loaded

Could you have installed the battery backwards by mistake? Even though the battery is new, it could be defective.
 

http://www.techspot.com/community/topics/cmos-checksum-error-defaults-loaded.197153/
Relevancy 18.06%

Not sure if I'm in the right section

Just unpluged my m audio delta 2496 card to do some other repairs. After reconnecting and powering up I have no sound in Cubase ( In device setup selecting m audio delta driver I get the following Error message "audio engine error could not activate asio driver m audio delta" Now even windows system sounds don't work. Have tried re-installing 2496 driver....no go. Any suggestions would be welcome.
 

A:Error message "audio engine error could not activate asio driver m audio delta"

List any Problem devices

Make sure devices are connected and powered on
Click Start->Run, enter: msinfo32. Click the + sign next to Components to expand it
Click Problem Devices. Anything appear?
If yes, click on it, Ctrl-A to select all, Ctrl-C to copy it, Ctrl-V to paste into next post
On the other hand, if no devices are listed, tell me so
Generate and attach a DirectX report

Click Start->Run, enter dxdiag and click OK
===> If you?re running 32 bit Windows, dxdiag will launch on its own
===> If you?re running 64 bit Windows, you?ll see 64-bit DxDiag. Click it to launch the 64-bit version of dxdiag
Notice progress in lower left window corner
When done, click Save Information button and save as a text file to your Desktop
Click the Upload a File button to upload and attach the file to your next TechSpot post


 

http://www.techspot.com/community/topics/error-message-audio-engine-error-could-not-activate-asio-driver-m-audio-delta.197151/
Relevancy 17.63%

I have started to route CAT e cable to make a wired network I have a server running Server a custom desktop running windows laptops running windows I have the modem and the wireless router in issues to connecting network Having a server the library I have the modem connected to the internet port of the router and one of the loads is connected to a wall jack that Having issues connecting a server to network connects to a cable that runs about feet to its termination This termination is connected to a Having issues connecting a server to network port switch Having issues connecting a server to network The server is connected to the switch directly Based on my understanding my server should have access to the internet and my network should have access to my server With this setup I have full internet access on every machine but the server and I cannot access the server from any computer I have hooked up the server to a second wireless router as a load and was able to successfully access it through the second router but there is no internet The network on the server shows up as Unidentified Limited Access when directly connected to the switch Has anyone seen this before or have an idea to fix this issue nbsp

A:Having issues connecting a server to network

Load? It'd be easier if you drew a diagram. Some of the info is missing.
 

http://www.techspot.com/community/topics/having-issues-connecting-a-server-to-network.197147/
Relevancy 14.19%

I have to new hp laptops same type and specs but for some reason one of them gets a dns error and the other doesnt why?
 

A:DNS Error

Compare the output of IPCONFIG /ALL for the two machines; suspect the failing one is not accessing the DHCP properly . . .
 

http://www.techspot.com/community/topics/dns-error.196646/
Relevancy 14.19%

I tried to format my laptop today but I cant. "It said that my pc needs to be repaired" and "the application or operating system couldn't be loaded because a required file is missing or contains errors." What should I do then???

 

A:Error formatting PC

"What should I do then???"... The built-in restore feature is corrupt, so you may have to get a Windows install disc. The hard drive may also be bad
 

http://www.techspot.com/community/topics/error-formatting-pc.196528/
Relevancy 17.63%

Hi I'm new to this site and I'm hoping I can find some answers here. My PCI-e Wifi adapter is working, and I'm able to connect to a wireless access point fine. But when I open my browser and go to google, it will not load. And evetually it says "No network connection."
However, if I plug a different adapter in, everything works perfectly fine.
One weird thing about the first adapter is that sometimes if I refresh the router, it will connect for like five seconds. Then stop working again. The device is fine, and system tray icon for wireless has no warning or disable indication.
 

A:Network card working but no internet

Power cycle the modem
unplug the router from ac and modem and wait for the router lights to flash and are ready
Power on the router and connect it to the modem
Go into the router and make sure under WAN (internet) it gets the DNS from the ISP there should be two of them listed. If you see 0.0.0. or 192.168.x.x then the Router is not communicating correctly with the modem.

If you see this the router would need a factory reset and re-run the setup again.
If all looks good but it's the PC that not connecting

Open up a dos session prompt run as Admin

Under dos prompt
type: ipconfig /flushdns

or



ipconfig /flushdns
nbtstat -R
netsh int reset all
netsh int ip reset
netsh winsock reset
sc stop Dhcp
sc start Dhcp
sc stop Dnscache
sc start Dnscache

reboot your PC
 

http://www.techspot.com/community/topics/network-card-working-but-no-internet.196381/
Relevancy 13.76%

lt lt RESOLVED gt gt For some reason whenever I try to run the file benchmark on my WD Blue TB or WD Black TB on HDTune Pro it always immediately returns a screen saying quot I O Error Test aborted quot Normally I would understand if this was happening if these drives were HDTune on gives drives I/O very test and new aborts Error old or had any indication that they are dying in some way However both drives have been purchased within the last months and the Blue drive was purchased only four HDTune gives I/O Error and aborts test on very new drives months ago They are each filled to approximately - capacity at the moment with this being the highest capacity the Blue has ever reached while the Black drive at one point hit before I reshuffled some files I haven t noticed any other issues with the drives at all except that HDTune s regular benchmark seems to say that the Blue drive is slightly faster than the Black which clearly shouldn t be the case HDTune s own drive status program shows no SMART issues in any of my drives either Does anyone know what could be causing this or how I could fix it Also I m not sure if this is relevant but my motherboard is currently set to run its SATA ports in quot RAID Mode quot instead of AHCI mode I HDTune gives I/O Error and aborts test on very new drives m not sure if that would matter but I don t currently have a RAID array this setting is just from a previous array that I used to have and now I m afraid that if I change the setting my drives might not boot anymore nbsp

A:HDTune gives I/O Error and aborts test on very new drives

Never mind, I figured it out. Problem was being caused by my drives being assigned as the A: drive and B: drive (Windows 8 allows this, and my slight OCD has always tormented me at not being able to use them for hard drives previous to this, so naturally I jumped on the opportunity to assign those letters). Anyway I reassigned to J: and K: drives just for the purpose of testing and all is now well!
 

http://www.techspot.com/community/topics/hdtune-gives-i-o-error-and-aborts-test-on-very-new-drives.196324/
Relevancy 17.63%

Hey all After shutting down my laptop running Vista the Unidentified Internet no network, connectivity next day I couldn t connect to the internet It connects to the network but says Unidentified network, no Internet connectivity quot unidentified network quot and there is no Unidentified network, no Internet connectivity internet connectivity Now another laptop in my house connects the network fine and internet is working perfectly So it is this laptop causing hassles I don t want to presume but it may have something to do with uninstalling AVG I tried to Unidentified network, no Internet connectivity install AVG day trial and the install failed for some reason I thought it might be some problem to do with older previous AVG versions on the laptop There was no AVG on the add remove programs function in control panel but after seeing bits of AVG over the C drive I downloaded and used AppRemover to completely remove AVG It found AVG or I can t remember exactly and I uninstalled it with that I hibernated the computer a few times and think this was the first time I had shut down the pc since finishing this uninstall Next time I booted up my internet connectivity doesn t seem to be working Just speculating on what the cause of the problem is so am open to any suggestions grinthumb Any help with this would be amazing grinthumb nbsp

A:Unidentified network, no Internet connectivity

Try CCleaner and do a registry sweep.
 

http://www.techspot.com/community/topics/unidentified-network-no-internet-connectivity.178319/
Relevancy 14.19%

FYI: For those dependent upon MSN.COM, today the website certificate is no longer valid,
as shown in the attached JPG.

Your A/V program may respond differently, but Avast! found the error and offers two solutions:
1) PUNT, ie abandon the access
2) accept the cert and make an exception for this error
 

http://www.techspot.com/community/topics/msn-com-certificate-error.196061/
Relevancy 17.63%

HP Pavillion with Windows Vista
Using a Diamond 300 mbps Wireless Repeater
Netgear Wireless Dualband Router N600 WNDR3400v2

When attempting to open IE, a popup opens that says:
Connect to 10.0.10.254
The server 10.0.10.254 at GoAhead requires a username and password.
Warning: This server is requesting that your username and password be sent in an insecure manner (basic authentication without a secure connection).
User name:
Password:
and OK and Cancel

In device manager, computer doesn't recognize a wireless device.
It displays NVIDIA nForce 10/100 mbps Ethernet but nothing else.

Other devices (laptop,Ipad) can connect to the wireless in the home.
Internet provider says it is not on their end.

Can someone please offer some advice on how to resolve this issue.

Thank you
 

A:Desktop Wireless network not connecting

Go to Device Manager, find the wireless adaptor. It should have a yellow ! symbol next to it.

Post details here, then you need to install the drivers for it.
 

http://www.techspot.com/community/topics/desktop-wireless-network-not-connecting.195589/
Relevancy 13.76%

Hi I am wondering if anyone has Drill After using Error Hard Drive Disk had the same happening to them or even better if anyone knows how to save my hard drive The external HDD is an month old Western Digital hard drive TB was working perfectly fine before this incident I had some jpg files that I accidentally deleted from my ext HDD so I used disk drill in order to try to recover the files disk drill estimated the process to app hours and during this time I could hear the hard drive making some noises usually it is very quiet When the process was done I saved the recovered images to my mac hard drive and saved the session All seemed fine so I dismounted the WD HDD the image disappeared but when I unplugged the Hard Drive Error After using Disk Drill USB an error message showed up saying I hadn t disconnected it properly Now when I try to connect the WD HDD it makes heaps of noises and clicking sounds and it doesn t show up as a device on mac I tried to open the saved session when WD HDD was connected but a message that I needed to connect the device showed up in disk drill I restarted mac plugged in the HDD and opened disk drill once again and now I Hard Drive Error After using Disk Drill get this message quot Dead disk detected The disk quot WD My Passport Media quot seems to be non-responsive dead Unfortunately you won t be able to recover any data from it without hardware intrusion As a quick recommendation please try to reconnect it to your Mac quot I am devastated everything was working Hard Drive Error After using Disk Drill fine previously I just wanted to recover jpg images and instead I lost everything on my HDD that contained a lot of really important data Please please help me solve this nbsp

A:Hard Drive Error After using Disk Drill

I only use WD drives here. WD Passports sometimes they don't work. What I do is this.
Place one in a ziplock bag and stick it into the freezer for 3 hrs or longer.
Thaw-it or use-it while it comes to life while you connect to a USB source like a PC
Most of the time the Passport will continue to work again. It all depends on the condition of it.

Clicking or clunking means the HDD is going bad.
In the pass others would say to use a screw driver handle and hit the drive.
But I always use the freezing method and it works enough to recover the data.
If the HDD is too far gone then nope not going to work.
 

http://www.techspot.com/community/topics/hard-drive-error-after-using-disk-drill.195888/
Relevancy 13.76%

Hi all my brother has a pc at home that he didnt want anymore so he put it in some black bags and I was taking it to the charity shop so they could sell it but the bag split at top of stairs and pc went tumberling down when I looked at it all the metal brackets had come loose from where u can put cards in and the gpu card came out to I put it all back propaly had couple of errors that I sorted but power abit dodgy when switching on. but the main problem is message comes up in task bar saying usb not recognised after plugging anything in any of the ports checked device manager and nothing wrong in there please help ... only 2 was not working before but now none work.. thanks in advance
 

http://www.techspot.com/community/topics/usb-not-recognised-message-error.195740/
Relevancy 17.63%

After looking for weeks now I found this website that might help me with my problem Please bear in mind that this problem is happening only on my Desktop disconnection when gaming Network Whenever I try to play an online game such as BF CS GO or Gotham Imposters my internet disconnect and then reconnect again resulting me getting kicked out of the game I tried these solutions Reset the modem Reset the router Reinstalling NICs drivers Ran anti virus spyware malware multiple times Reset my network stat using specialized programs Diagnosing the network from netstat to pinging Google Nothing seem to be wrong with it Rebooted the PC over times in the last hours Flushed the DNS Yet the problem is still there and I have no idea how to fix it System specs Windows Home Premium x bit NIC Realtek GBE and ASUS wireless card Router Linksys e And this problem is happening on two network cards so it s not something wrong with my NIC my guess it s something to do with DNS If you have an answer please let me know and if you have questions about extra information let me know so I can post them P S this is my DDS file report that you might need nbsp

A:Network disconnection when gaming

DNS is not the issue. Much more likely you need to
1) update the firmware in your router
2) update the driver(s) for your NIC or WiFI

and then set the router MTU to 1492
 

http://www.techspot.com/community/topics/network-disconnection-when-gaming.195660/
Relevancy 13.76%

Hi all,
Can som1 help me?
I have a asus p5n-d mobo, that keeps giving the same error at start up " Cmoc checksum error - Defaults loaded". Ive updated the bios file from 0601 to 0801 and also changed the battery but I keep getting the same message.

Ive tried to reset the bios with the mobo cd but that aren't no help either.
If their arent anything else I can do, im thinking of getting a budget socket 1155 mobo with sli, could som1 recommended a mobo.

Thanks
 

A:Asus mobo Bios error?

Clear CMOS And Update Bios
 

http://www.techspot.com/community/topics/asus-mobo-bios-error.195357/
Relevancy 17.2%

Problem:
I have a PC that has to connect to a server through a modem for security reasons.
While it is connected to the modem, a screen needs to be printed.
The printer that is being used is connected to the local network.
While connected to the modem, attempting to print gives the error "The RPC server is unavailable."

System:
Windows XP Professional SP3
Printer server is Windows Server 2008
Modem is old 56k modem connected by serial port (don't think that matters)

What I've tried:
I have tried modifying the routing table to force connections to the subnet that the computer and printer are hosted on.
route -p add 10.1.0.0 MASK 255.255.255.0 10.1.61.0 METRIC 40 IF 0x2
ip for the PC is 10.1.61.53, ip for the printer is 10.1.61.22, IF 0x2 is the integrated NIC
The RPC service is running, and I have also started the RPC locator

Any suggestions what I should do next?
 

A:Unable to print to network printer while connected to modem

These are correct

ip for the PC is 10.1.61.53,
ip for the printer is 10.1.61.22, IF 0x2
but this is not

route -p add 10.1.0.0 MASK 255.255.255.0 10.1.61.0
and should not be necessary at all, if the PC gateway is on 10.1.61.x

Instead, get the output of ROUTE PRINT and post that
 

http://www.techspot.com/community/topics/unable-to-print-to-network-printer-while-connected-to-modem.195362/
Relevancy 18.06%

Hi team,

I have just moved from a wired modem to a wireless adapter a TP link 300MPS N wireless adapter. This works great on one of my computers using XP, however when I plug it into my current Vista operating computer I can not see any wireless networks... I'm wired in at the moment

The adapter works fine and I can see the entire neighbourhoods wifi networks and connect to the internet on one computer, but nothing on the other.

How can I fix this?

Stuart
 

A:Can't see my wireless network

1st: uninstall & reinstall with the latest drivers from the manufacturer for Vista, be sure to get correct driver - 32bit or 64bit.
2nd: After doing 1st step, if still no dice, try reconfiguring the wireless encryption type, if you are currently using WPA2 change to WPA, or WEP, just humor me and change the type to see if you can then see the wireless network.
3rd: If the previous two things don't work, try resetting the Vista TCP winsock, steps below:

a. Click on Start button.
b. Type Cmd in the Start Search text box.
c. Press Ctrl-Shift-Enter keyboard shortcut to run Command Prompt as Administrator. Allow elevation request.
d. Type netsh winsock reset in the Command Prompt shell, and then press the Enter key.
e. Restart the computer.

Post back & let me know if this helped! Take care!!
 

http://www.techspot.com/community/topics/cant-see-my-wireless-network.195204/
Relevancy 17.63%

I have a Windows 7 computer wired into my home network. It has a printer attached to it that I have set to share. I have a windows 7 laptop and an XP laptop. Both 7 machines can see open the shared drives on the XP machine but when I try to access the shared drives of either 7 machine from any of the other machines I am asked to give a User ID and a password. This is a private Home network. I have no passwords set up on any of the machines. I'm trying to set up the printer on the two laptops and I can't access it without the User ID Password window popping up. Does anyone know what the problem is?
 

A:Home Network asking for user ID and password

This is all normal operation for print/file sharing. If you really want sharing without using passwords (imo a security risk), then you need to google for "anonymous sharing"
 

http://www.techspot.com/community/topics/home-network-asking-for-user-id-and-password.194484/
Relevancy 17.63%

It seems that when people print at my office, there the print randomly delays which backs up the print queue. All PC's & printers are hard wired. The printers are on a printer server. I tried restarting the print spooler, but nothing happened. Any suggestions?
 

A:Printer network delays

The printers are on a printer server.Click to expand...

Power cycle the print server.
 

http://www.techspot.com/community/topics/printer-network-delays.194666/
Relevancy 17.63%

Hi there,

I am new to home networking.

I am trying to connect 2 of my apartment with network as well as all my rooms.

I wonder if my networking will work in this way? Please advise if I need to change any devices.
 

A:Will My Home Network Work?

Hmm that diagram is most interesting - - and imo hard to determine what's what.

Try something like:

Code:

isp==modem/router --- wired --- ?
|
+ - - - wifi - - ?
 

http://www.techspot.com/community/topics/will-my-home-network-work.194191/
Relevancy 17.2%

I live in India. I have 12 computers in two workgroup (9 and 3), also I have two different broadband plans of 2mbps on both workgroup.

Now I want to join two networks which I can do with a switch (I think). the main issue is that if I joined the two workgroup in a single network how I can run internet on different workgroup separately. in other words I want different internet broadband lines to two workgroup and also want them in a single network.

I run a shop have 9 computers as a cyber and 3 computers for working on a government website. and I don't want that cyber system use bandwidth of those three computers and also want these 3 computers to be on network so that I can monitor them from 1 place.

Thanks....
 

A:Two diffrent Interet service on two workgroup in a network

The key to your issue is where the 9 systems vs the 3 get DHCP replies.
If the 3 systems go to one router, they will get a gateway address of that router AND each system will also get a DEFAULT route pointing to that gateway address.

Here's my IPCONFIG, showing the gateway

Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : socal.rr.com
IPv4 Address. . . . . . . . . . . : 192.168.0.5
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.0.1

and the routing table that gets created with that connection; notice the line beginning with 0.0.0.0 - - that's the default.

Code:
IPv4 Route Table
===================================================================
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 192.168.0.1 192.168.0.5 20
127.0.0.0 255.0.0.0 On-link 127.0.0.1 306
127.0.0.1 255.255.255.255 On-link 127.0.0.1 306
127.255.255.255 255.255.255.255 On-link 127.0.0.1 306
192.168.0.0 255.255.255.0 On-link 192.168.0.5 276
192.168.0.5 255.255.255.255 On-link 192.168.0.5 276
192.168.0.255 255.255.255.255 On-link 192.168.0.5 276
224.0.0.0 240.0.0.0 On-link 127.0.0.1 306
224.0.0.0 240.0.0.0 On-link 192.168.0.5 276
255.255.255.255 255.255.255.255 On-link 127.0.0.1 306
255.255.255.255 255.255.255.255 On-link 192.168.0.5 276
You must make sure that the two routers have different addresses!!!

Then the 9 systems will have their own gateway and route tables.

Assuming the three systems have a router address of 192.168.3.1 and the 9 systems use 192.168.9.1 [the third digit is the number of systems just to make this discussion clear]

then your problem becomes to connect the two networks inside the routing tables of all systems.

MANUALLY, you add a route using
on the 9.system side
route ADD 192.168.3.0 MASK 255.255.255.0 192.168.9.x METRIC 1​on the 3.system side
route ADD 192.168.9.0 MASK 255.255.255.0 192.168.3.y METRIC 1​​That makes TCP see both sides but only resources specifically requested cross from one side to the other - - USING IP ADDRESSES. If you need print/file shares using names, you will need
to add them to the drivers\etc\hosts file everywhere and the shared systems need fixed addresses :sigh:

I am reluctant to lead you down this path UNLESS you are very experienced as this is considerable customization and will need to be well documented.



 

http://www.techspot.com/community/topics/two-diffrent-interet-service-on-two-workgroup-in-a-network.193922/
Relevancy 17.63%

I am pretty much a novice with regards to networking. We recently built a new house and have wired it with cat 5e wire. I want to share my windstream internet connection over the network as well as be able to share files and use a drobo storage unit. I have a windstream router an a gigabit network switch. Will connecting a direct wire from the modem to the switch allow all the computers to gain access to the internet.
 

A:Setting Up a Gigabit Network

Correct - - everything attach to the router or a switch hung off of it will be "in the same subnet" as there is only one router. Wifi and wired will look the same to all users and everyone can "play" at the same time
 

http://www.techspot.com/community/topics/setting-up-a-gigabit-network.193543/
Relevancy 17.63%

Hello I am having issues with my internet When I do a test on pingtest net I get - packet loss but when I do the same network the Getting only on same computer on loss packet one test on other computers in my house they get As I m a gamer this is a huge issue because I experience exactly I have experienced EVERYTHING in this description quot Much as it sounds if you have anything less than complete success in Getting packet loss on only one computer on the same network transmitting and receiving quot packets quot of data then you are experiencing this problem with your Internet connection It can mean much slower download and upload speeds poor quality Getting packet loss on only one computer on the same network VoIP audio pauses with streaming media and what seems like time warping in games -- your connection may even come to a total standstill Packet loss is a metric where anything greater than should cause concern quot from pingtest net Here are my netlyzr results http n netalyzr icsi berkeley edu summary id ca a- - feb - cc- d - c What ive tried thus far and didnt work Malware scan Uninstalling firewall uninstalling antivirus I have used wired and wireless connections and still getting the same problem FULL scan for viruses etc used win troubleshooter-doesn t have a clue I will admit I have torrented before I have stopped now and I used to get kbps down on bittorrent then I think plusnet my ISP somehow caught on and stopped it then I got kbps Maybe something to do with that has caused the issue I still have Microsoft security essentials on my PC if that might be causing trouble If you need more info please ask thanks Max nbsp

A:Getting packet loss on only one computer on the same network

Describe the network hardware (make/model how old) and your connections to it. I've seen ethernet slots on routers go bad, so swap the cable from one slot to another.
 

http://www.techspot.com/community/topics/getting-packet-loss-on-only-one-computer-on-the-same-network.193353/
Relevancy 14.19%

This is my first post and hope I am doing it right, if this is the wrong place to post...I apologize.
quite often when opening a web site I get the error "Error 105 (net::ERR_NAME_NOT_RESOLVED): Unable to resolve the server's DNS address."
If I refresh the page usually I am able to open it. I am using chrome.

Thank You
 

A:DNS Look up fail error

Try this:
Go to the start menu and type in CMD-->Right click on CMD, and press "Run as Administrator"-->type this in exactly: ipconfig /flushdns

Tell me if this works out.
 

http://www.techspot.com/community/topics/dns-look-up-fail-error.193748/
Relevancy 13.76%

Everything on the network was set up fine with sharing between all the computers and it seemed like as time went on the windows computer encountered more and more problems One of the xp computers suddenly required a password to access the windows computer Windows suddenly couldn t access any of the other computers but you could still push files to it from the other ones But now I cant push any files to the windows computer or Between other Networking computers Error Windows and 8 all access any of the windows or xp computers files from the windows comp I get an error message saying Network Error Windows cannot access insertnamehere insertdrivehere You do not have permission to access insertnamehere insertdrivehere Contact your network administrator to request access I get this error message through both windows and and xp Networking Error Between Windows 8 and all other computers gives a cannot access error But I can see the drives I wish to access and the computers themselves I just cannot get into the drives even though all my permissions seem to be set properly If anyone can help it would be appreciated nbsp

A:Networking Error Between Windows 8 and all other computers

First it is a big time security hole to allow shared access directly to a drive




Windows cannot access \\insertnamehere\insertdrivehereClick to expand...

Sharing should be to a directory such as

\\systemName\publicFolder or
\\systemName\personalDocuments
Sharing has two major components:

network access to the \\systemName
NTFS access to the specific sharedFolderName
Hopefully your XP is SP3 which has the LLTP service necessary for Win/{7&8}. If you have XP SP1 or 2, then find the LLTP update for it.

Before we go crazy, you mentioned




any of the other computersClick to expand...

so verify that all the other systems can share with each other (ie ignore Win/8) in both directions A can share with B and conversely. This will ensure the systems are configured correctly AND that the firewall is not a problem.
 

http://www.techspot.com/community/topics/networking-error-between-windows-8-and-all-other-computers.192500/
Relevancy 17.2%

I have a really strange situation today that started after I had to reboot our UTM device and then switch We have a wired network although our modem router is also wireless if needed We don t use the wireless normally After rebooting the UTM and Switch all computers were turned back on again one by one of the were up and running and on the network and internet straight away One PC connected to the LAN but cannot get internet access Our DHCP server is on the UTM Internet (Win7) Network Wired Computer no has on One device and each computer has it s IP address reserved This computer had reserved and it still has that IP address when I do ipconfig It can access all the files on our NAS and all the printers on the network I ran all the ipconfig commands to One Computer on Wired Network has no Internet (Win7) release renew One Computer on Wired Network has no Internet (Win7) flushdns I reset winsock and rebooted Still no internet I did a print screen off one of the PCs that is working properly and compared it Apart from the MAC address and other PC specific items I could see no difference So I put a wireless dongle on it to see if it would connect the the internet on wireless It worked I had internet but no LAN other than to the wireless router So I thought there must be a problem with the NIC I went to the local PC store and bought a new NIC card and installed it I disabled the old one and connected the network cable to the new one No difference If I enable the NIC card I have LAN but no internet if I enable the wireless dongle I have internet but no LAN I need both I cannot figure out what has changed on this ONE PC that was working fine until today Oh one other thing I tried that didn t work I connected a brand new Ethernet cable directly from the modem router to the PC So this bypassed the UTM device and Switch Still no wired internet nbsp

A:One Computer on Wired Network has no Internet (Win7)

Try these

ping 8.8.8.8
nslookup google.com
ping techspot.com
(1) shows packets going to google's dns
(2) shows you can convert name to ip address
(3) shows access to our site
 

http://www.techspot.com/community/topics/one-computer-on-wired-network-has-no-internet-win7.193364/
Relevancy 17.63%

Hello At the office where I work one view to office network DVR Using card there are two different phone lines each of which has a DSL contract On Using one network card to view office DVR one of the lines there is a dsl modem router which has a dvr connected for the security cameras I use the other router to Using one network card to view office DVR connect to the internet and for the local network sharing files with colleagues When I view the security cameras over the internet Using one network card to view office DVR using the router I connect to the image is really delayed I want to connect to the DVR v a local network with one network card so that the image is not delayed and use the other network card for the file sharing and accessing the internet How can I do this without creating a conflict I e having my computer try to connect to the internet using the network card for the dvr In summary I want to use one network card exclusively to view the security cameras and another network card for the internet and file sharing I m using Windows Home Premium Any help would be appreciated nbsp

A:Using one network card to view office DVR

You should be fine as long as the Internet NIC is plugged in first. Your routing table will confirm you have done it correctly.

jobeard can expand.
 

http://www.techspot.com/community/topics/using-one-network-card-to-view-office-dvr.193241/
Relevancy 17.2%

I m hoping to get some help on this because I ve spent hours and hours during the last days trying to fix this problem on my own No luck Please I m trying to connect to a public wifi network at home on my laptop Lenovo ThinkPad and while it shows that the computer none but Unidentified network. Packets No access. internet set received. is connected to the network it shows quot unidentified network no internet access quot and I Unidentified network. Packets set but none received. No internet access. m unable to go online My housemate has a Mac laptop and it connects without any problems When I go to quot Wireless Network Connection Status quot it shows that packets have been sent but received Operating System is Windows bit This is what I get from the ipconfig all Windows IP Configuration Host Name Dasha-THINK Primary Dns Suffix Node Type Mixed IP Routing Enabled No WINS Proxy Enabled No Wireless LAN adapter Wireless Network Connection Media State Media disconnected Connection-specific DNS Suffix Description Microsoft Virtual WiFi Miniport Adapter Physical Address - - E-EE- - C DHCP Enabled Yes Autoconfiguration Enabled Yes Wireless LAN adapter Wireless Network Connection Connection-specific DNS Suffix Description b g n Wireless LAN Mini-PCI Express Adapter II Physical Address - - E-EE- - C DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe ecbc a a e Preferred Autoconfiguration IPv Address Preferred Subnet Mask Default Gateway DHCPv IAID DHCPv Client DUID - - - - -D - F- F- - - E-BB-C -B DNS Servers fec ffff fec ffff fec ffff NetBIOS over Tcpip Enabled Ethernet adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Realtek PCIe GBE Family Controller Physical Address - - E-BB-C -B DHCP Enabled Yes Autoconfiguration Enabled Yes As you can the default gateway is blank I run McAfee and I already tried disabling the firewall and then uninstalling McAfee thinking it s the cause of my problem but nothing changed When I try to ping I get lost and packets sent and received I hope someone will be kind enough to offer some ideas Thanks nbsp

A:Unidentified network. Packets set but none received. No internet access.

Autoconfiguration IPv4 Address. . : 169.254.161.62(Preferred)Click to expand...

that's the problem - - not attached to your router.
"Node Type . . . . . . . . . . . . : Mixed" is typically the reason.

save the attached file to disk and rename by removing the .TXT suffix

double click and allow the change.

disconnect the ethernet cable, wait 30 seconds and then reattach it

+30 seconds more and repeat the IPCONFIG /ALL

you should see Note Type hybrid and a real IP address
 

http://www.techspot.com/community/topics/unidentified-network-packets-set-but-none-received-no-internet-access.193127/
Relevancy 17.2%

Hi all just need a little help from you smarter people.

I have lots of devices on my wireless all work fine until this Hp notebook starts it seems to kick everything else off the network. So now called the death machine by all the family. Is this just a setting on the notebook that causes this? It happens on all networks that it joins to and stops as soon as the computer goes back into sleep.

Any help would be most appreciated

Thanks Oli
 

A:Notebook network issue (death machine)

Likely you have an IP address conflict - - two machines with the same address.
This will cause problems with everything attached to that same router (wifi or wired).

Make sure ALL devices do not use manual settings but rather use automatic DHCP for both IP and DNS
 

http://www.techspot.com/community/topics/notebook-network-issue-death-machine.193051/