Windows Support Forum

Server 2008 re-install software

Q: Server 2008 re-install software

I have a 2008 server and I'm trying to re-install Crystal reports software becuase of a missing dll. I can re-install without any problems, and when I go into the software it works fine, but when I log off and log back on, I have the same problems taht I had before re-installing.

It's like the re-install did not happen, I'm and admin on the server and I'm also running the setup.exe as admin, what could be the problem.

Thanks in advance.

Relevancy 100%
Preferred Solution: Server 2008 re-install software

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Server 2008 re-install software

Quote: Originally Posted by dplociac


I have a 2008 server and I'm trying to re-install Crystal reports software becuase of a missing dll. I can re-install without any problems, and when I go into the software it works fine, but when I log off and log back on, I have the same problems taht I had before re-installing.

It's like the re-install did not happen, I'm and admin on the server and I'm also running the setup.exe as admin, what could be the problem.

Thanks in advance.


Are you running any anti virus or firewall apps?
Ken

http://www.sevenforums.com/software/91671-server-2008-re-install-software.html
Relevancy 21.5%

I have been working on setting up a Minecraft server for a couple of days now and I cannot find a way to get my friends outside of my network to connect connect my to can't My server friends Minecraft I know I gave them the right IP address and I have tried several solutions with no luck I can however connect to the server from other computers connected to the same router but I think that only works when I have it set My friends can't connect to my Minecraft server to quot cracked quot mode I tried disabling my firewall on both my host computer and my router using a different computer as the server host and changing the port All solutions I have tried gave the same message to my friends quot Cannot reach server quot My friends can't connect to my Minecraft server when I was able to connect just fine Here is some possibly useful information Host computer It s not the best -OS Windows XP Professional SP -Processor Intel Pentium GHz uni-core -RAM MB -IP Address Minecraft Server -Version jar Router -Type Wired Wireless -Brand Cisco -Model Linksys E -IP Address -Router Information Firmware Version build Apr Firmware Verification e c b ec c b c ceb Current Time Fri Jan Internet MAC Address FC CB -Internet Connection Connection Type Automatic Configuration - DHCP Internet IP Address Subnet Mask Default Gateway DNS DNS DNS MTU DHCP Lease Time Hour If there is My friends can't connect to my Minecraft server any other information you need please tell me nbsp

A:My friends can't connect to my Minecraft server

You need to forward some ports (router settings) and then open incoming port in your firewall (OS settings). Start here.
 

http://www.techspot.com/community/topics/my-friends-cant-connect-to-my-minecraft-server.175806/
Relevancy 16.77%

Hi Could anyone please confirm if I buy Samsung 850 Evo 500GB, will I be able to install this on my desktop? Just looks like it only fits for laptops?

Thank you
 

A:Samsung 850 Evo 500GB, want to install on desktop

There are adapters available if the drive doesn't come with them packaged. The adapters adapt from 3.5" drive bay to 2.5" drive bay.

http://www.newegg.com/Product/Produ...scription=hdd+adapter+bracket&N=-1&isNodeId=1
 

http://www.techspot.com/community/topics/samsung-850-evo-500gb-want-to-install-on-desktop.216637/
Relevancy 16.34%

Hi all,
I am new to this forum..
To start, I had just bought an ASUS computer.. wanting to play games like borderlands 1, left for dead 2 etc. But, when I was very trilled waiting to start the games, both of them had blacked screen and forced shutdown my computer every time after the game has been launched!
I had done many researches in the net, changing the registry values in directx11, reinstalling the NVIDIA drivers (halfway black screen upon reinstalling), changing the compatibility to Windows 7, adding missing physxcudart_20 to the games...None of them works..T-T
Any help is greatly appreciated!
 

A:Unable to install Nvidia driver and also to play games on Windows 8.1

I'd recommend to do the following:

Perform a clean install of Windows

Re-install Nvidia drivers
Download CPU-Z and GPU-Z (or any CPU and GPU monitoring software)
Monitor both while attempting to play games - check for temperature spikes.
Doing the above will help you rule out a lot of potential issues that are causing your problems. The clean windows install will get rid of any OS related issues. You never want to touch the windows registry unless you really have to, especially if you're not very well versed in the way it works. It can cause way more harm than good. With that said, the system crashes were probably due to a bad driver instillation and was causing a BSOD - most modern systems are set to restart / shutdown when this happens. You'll never know it happened unless you changed the configuration to stop the automatic shutdown. It could also be temperature related, if your CPU or GPU overheats, it'll typically trigger a system crash as well and result in the same BSOD sequence.

Let me know how it goes after you've tried what I've mentioned.
 

http://www.techspot.com/community/topics/unable-to-install-nvidia-driver-and-also-to-play-games-on-windows-8-1.213781/
Relevancy 21.5%

A few months ago I made a minecraft server and it worked perfectly. Today I tried to join with external ip and it didnt work but I could before.Is it something important? Is my server working? Is it the router's problem?
I would appreciate any help as soon as possible

Btw my ip is 46.12.115.127
 

A:Minecraft Server Problem

@ 13:50 PDT I can not ping that IP from Southern Calif.
 

http://www.techspot.com/community/topics/minecraft-server-problem.212628/
Relevancy 17.2%

Hey guys, I've just upgraded my 5 year old pc with almost everything new. I got an Asus Maximus VII Ranger & an i7-4790k cpu & other new stuff except my graphics card & ram, 2 x 8gb Hyper X Fury 1600mhz. What I don't understand is reading the manual about the speed of ram I can install.

4 x DIMM, Max. 32GB, DDR3 3200(O.C.)/3100(O.C.)/3000(O.C.)/2933(O.C.)/2800(O.C.)/2666(O.C.)/2600(O.C.)/2500(O.C.)/2400(O.C.)/2200(O.C.)/2133(O.C.)/2000(O.C.)/1866(O.C.)/1600/1333 MHz Non-ECC, Un-buffered Memory *
Dual Channel Memory Architecture
Supports Intel® Extreme Memory Profile (XMP)
* Hyper DIMM support is subject to the physical characteristics of individual CPUs.

I would like to install higher speed rams like 2400mhz or higher if possible (are there even 3000++ mhz ddr available? Looking at my local shop, 2400mhz ddr3 is the highest) without overclocking but I'm lost at the " (O.C) " bit. Do I need to overclock them to get at that speed or can I just get rams that are made at that speed? Thanks!
 

A:Need info on RAM to install on new mobo

The OC means you will need to OC your motherboard to use RAM rated at that speed. If you are not planning on OCing, just get the 1600/1333 Mhz modules.

BTW the average person would never notice the differences in RAM speeds. Memory is not the bottleneck in computing.
 

http://www.techspot.com/community/topics/need-info-on-ram-to-install-on-new-mobo.210150/
Relevancy 21.5%

Hello everyone
so I have gameserer hosting website
and all my server I rent them from some website
now I have 2 server in my home but I will sell it
and I want to buy new one
but I don't know what is the beast part I have to get it ?
should I get E5 or E3 ? and 1cpu or 2cpu ?
I will host on it some game and its MineCraft and some other game from valve
the other game from valve is
Counter 1.6,scours,go
Garry's mod
Team Fortress 2

so what is the largest server can I have so I can host as many as I can on it ? and about the price I don't care to much on it so if you can just give me something good
I think I will host at less 20-30 servers on it

so what can you advise me ?
 

A:Bulid servers for Game-Server

Well I would do some researching on what people use for their servers because I don't have much knowledge personally on game servers. What I can provide though is insight on how the parts differ.

A Xeon E5 is based on a completely server-oriented architecture while the E3 is supposedly just a more high-quality binned i7.

I would read up more on server hosting requirements/what is best more in depth than I did below, but the consensus seems to be that the E3 or E5 is fine with lots of RAM. Keep in mind, the E5 can have twice as much RAM as the E3. Another thing to keep in mind is whether the game is multi-threaded or single threaded and the tick-rate of the server. If you have more players and the game is multi-threaded (Minecraft isn't for example if I am not mistaken), then go for the E5 just to be safe.

I was researching online about the CS:GO server requirements and came across this forum post and they linked to this dedicated server wiki page. Since Garry's Mod, CS:GO, and TF2 run on the same engine, the requirements should technically be the same. Minecraft isn't really too demanding either so you should be fine basing the server on Source games. Here are the requirements for a Minecraft server. It seems to me like the servers don't need much horsepower.

Here is another useful forum thread that will provide the best insight.
 

http://www.techspot.com/community/topics/bulid-servers-for-game-server.208926/
Relevancy 21.5%

I am deeply sorry to post this silly question but here is my problem:
Recently I made my mc server, I port-forwarded the 25565 port and my friends joined and the server worked perfectly. Then all of a sudden, they disconnected all at once. After some investigation I realized that my external ip adress had changed. I kept giving my friends the new ip adresses every time they changed but that seemed like not the best solution. Also I checked and my ips are static. I have some screenshots containing the problems and info here.






I used PortForward Network Utilities to make the ips static and every one is static and the external ip keeps changing. Is there a way to stop the external ip from changing or no?
P.s. DHCP is not enabled on LAN.
Sry for my derpy tech language if you don't understand anything just ask
 

A:My friends get disconnected to my Minecraft server

Okay, that is a legit issue. Your external IP address is provided by your Internet Service Provider. It seems as if they either have it set to switch IP addresses constantly, or they're doing that just to you to prevent you using a server unless you pay more money for a static IP. My local provider refreshes my IP very rarely, but I have had it happen in the past and it did confuse me for a bit. Call up your ISP about the problem, and see if you can figure out a way to stop it. I wouldn't imagine it adding too much more to your internet bill, but I honestly don't know.
 

http://www.techspot.com/community/topics/my-friends-get-disconnected-to-my-minecraft-server.208559/
Relevancy 21.5%

I'm curious if there is any open source proxy-server-like software out there that I can use to accelerate web surfing. Amazon's Silk browser/platform for the Kindle, and Opera Mini do this for mobile clients; I'm mostly thinking about setting this up for laptop / desktop clients, so I'm not so interested in having a server render a webpage.

My setup is this: I have a few clients (my computers), on a high-latency internet connection. I have access to a relatively private server, which has an extremely fast internet connection.

Would setting up a proxy server on the server [machine] actually help connection speeds? I imagine things like Silk and Opera Mini compress data (don't send the same thing twice), and reduce the # of HTTP requests (for images, etc.). Would something like squid actually have the same effect? It seems to be targeted at the slow-website-server scenario.
 

http://www.techspot.com/community/topics/can-one-set-up-a-proxy-server-to-accelerate-web-browsing.207907/
Relevancy 21.5%

I am trying to set up my Windows Xp computer as a VPN server I have taken the initial steps I get to the Accept Xp setup VPN hanging server Windows incoming connections screen and click okay The computer hangs for about a minute or so and then comes up with the following message Incoming connections depend on Routing and Remote access Windows Xp VPN server setup hanging service which was unable to start For more information check the system event log I presumed I had to go to control panel performance and maintenance Administrative Tools Event viewer I have already made sure that Routing and Remote access are enabled as well as Telephony I could not find Netbios in the services list and don t know where to Windows Xp VPN server setup hanging look for it Also when I try to start Routing and Remote access service manually I get the following message Windows could not start Routing and Remote access on local computer For more information review the System Event Log If this is a non-Microsoft service contact the service vendor and refer to the service specific error code- Can some one give me a step by step walk through of how to resolve this issue so I can connect to that computer from work over the internet nbsp

http://www.techspot.com/community/topics/windows-xp-vpn-server-setup-hanging.207658/
Relevancy 21.5%

Every time I shut down my Inspiron 15 using windows 8.1 when I boot back up I get an error message proxy server not responding when I try to go online. I then have to go to the connections tab of internet options and click lan settings and uncheck use proxy server for your lan. Is there something I can do to get around having to do this every time I boot up?
 

A:Proxy server not responding

Never mind, I researched microsoft's website and reset ie settings to solve the problem,
 

http://www.techspot.com/community/topics/proxy-server-not-responding.207513/
Relevancy 16.34%

Hello hello After having a problem with my cd dvd drive I rebooted my computer and did a clean install of Windows from my Vista So right now I m running Windows Windows not install (Touch/slider) FN - 7 Clean Keys working I have a VAIO - VGN-CS J Windows looks and feels great so far The only problem is my little sliding touch pad at the top doesn t work I don t know if it s FN keys but on top of my keyboard there s a little sliding touch pad for volume along with a fast forward rewind key I used to be able to slide the volume up from there but now it s not working I looked it up and I know this has to do with my clean install of windows I tried installing a bunch of drivers like everyone said online Sony Shared Libraries Vaio Event Notebook Control Device And a bunch of other drivers that people talked about I don t know what s wrong but it s still not working so I did a system restore to before I installed everything so that I can have a clean slate Can someone please help me fix my volume control slider please Thank you so much nbsp

A:Clean install Windows 7 - FN Keys (Touch/slider) not working

Laptops have extras over and above Windows and if you reinstall the OS or upgrade it you lose these. I've been there and done that with the FZ. It was broken when I bought it and the hard drive had been removed. Fixing the computer was very hard, installing Windows 7 was easy. Afterwards, like yourself I found that the function keys didn't work. Trawling forums and looking for drivers then sorting it out took ages and that was the most challenging part of the whole exercise. Everything necessary was on the Sony support sites but these were not user friendly and I needed to use several Sony sites. Needless to say Sony support were clueless. In the end I got everything functioning but if you can manage with things as they are I'd not bother. One tip, although it might not work with your particular Vaio model is that stuff has to be installed in a particular order otherwise some keys don't work.

That'll teach you to mess with Windows when a cd/dvd plays up.
 

http://www.techspot.com/community/topics/clean-install-windows-7-fn-keys-touch-slider-not-working.207046/
Relevancy 21.07%

Hi,

I am playing around with Server 2012. If I want to have a laptop configured for "at office use" with option to go on site, what would be the best way to do that in order to retain access to shared locations on server that is "at office"?

Should I create a standard windows account unrelated to my domain controller, and have them VPN regardless if they are in office or on site? Or is there a way to have a laptop configured for domain use, where it will still be functional (local computer use) on site outside of the office, even without internet connection (I know you can's VPN without it).

Thanks
 

A:Best way to set up local and remote user with Server 2012

Well this is kind of interesting. You can in fact use a domain laptop away from the local network as long as you have logged into int once on the domain so it can cache your password for future log ins. Now comes to the more difficult part of your question's. Accessing files remotely while not online, you can set up what is called offline files. Offline files will give you acess to your files away from domain network. So if you choose to do offline files any changes made to the file while away from the domain controller where you shares are set up will have to be synced once back on the domain network. So if you make changes to lets say docA while off domain network, once you get back to domain network you will have to sync offline files to the server to update any changes you have made. This set up would not require offsite network but can bring problems when syncing once you reconnect on domain. But now lets say you have the same shares and now you have multiple individials with the same access to the shares. Say you make changes to docA and the other person makes changes to docA while offiste. Once you both reconnect and sync to server you could have issues with data such as duplicate information or doc merging. VPN would be the best option for sure....
 

http://www.techspot.com/community/topics/best-way-to-set-up-local-and-remote-user-with-server-2012.206403/
Relevancy 21.5%

Hi,

Wile I am in the posting mood. Just thought I would ask the question. Is it possible for me to host/and play a call of duty server from my laptop or desktop?
When I was younger I played games like the delta force collection of games. And could just go into the game, click host server. And then gradually people would join my game as they seen it on the lobby.
Is this possible with any of the call of duty games for PC? I assume it needs some network configuration
If anyone could help me do it I would be really gratefull. I have my Nat port configured to open. But I would like to host a server and have it free for anyone to join

Thanks
C
 

A:Hosting call of duty 2 server

Has anyone any advice on this? :/
 

http://www.techspot.com/community/topics/hosting-call-of-duty-2-server.206731/
Relevancy 21.07%

This mobo got me wondering, packs alot of specs :
18 SATA ports (10 are SATA3 ports from the Intel X99 Express chipset, 8 are SAS ports stemming from the LSI SAS 3008 controller) and five PCI-E 3.0 x 16slots for 4-way graphics cards! 600$ motherboard for some serious business, I think this would be ideal for a video editing workstation..
 

A:Ultimate server / Workstation mobo? Asrock X99 Extreme 11

I'm probably one of the few that uses the ASRock Z87 Extreme11
There is always a market for their Extreme11 series boards. I use mine for a bounch of stuff gaming, media server, video editing with all 22 SATA ports even 2way SLI. Might be a bit over kill 4 way SLI but who knows...
 

http://www.techspot.com/community/topics/ultimate-server-workstation-mobo-asrock-x99-extreme-11.206694/
Relevancy 20.64%

Hi,

I'm using a Huawei Mobile Broadband E303 and I've been having this problem for 6-7 days now Ples halp
It was working perfectly fine before but now the speed wont go past 60-70kbps.
My current operating system is windows 7 ( V 6.1.7601 )

I've tried using it on other laptops with windows 7/xp/vista as their operating systems still the same problem except for my brothers laptop which runs on windows 8. and dont tell me that this Thing wont work because its not compatible with my operating system, because I've been using it for over a year without an issue.

My ipconfig shows:
Mobile Broadband adapter Mobile Broadband Connection:

Connection-specific DNS Suffix . :
Link-local IPv6 Address . . . . . : fe80::7450:69bc:7a3e:fee8%57
IPv4 Address. . . . . . . . . . . : 172.22.155.137
Subnet Mask . . . . . . . . . . . : 255.255.255.252
Default Gateway . . . . . . . . . : 172.22.155.138
And when I try to do nslookup:
C:\Windows\system32>nslookup
Default Server: google-public-dns-a.google.com
Address: 8.8.8.8

The default server shouldn't be that thing. please help. Nor the address

Edit: I've tried Uninstalling the Program which came with the USB.
I've tried calling my ISP, with no problems on their end.
 

http://www.techspot.com/community/topics/your-computer-seems-to-be-correctly-configured-but-the-device-or-resource-dns-server-not-respondin.206332/
Relevancy 17.2%

I decided to upgrade my old hard drive to a new hard drive. When I tried to install Windows Xp on the hard drive it wouldn't let me. I have a Dell Xps 400 bought back in 2006.
The new HD is a WE 1tb. The error codes comes when I try to install windows xp on the hd. It says

I got a blue screen error after clicking enter at the screen where there is no partition found:
Check to be sure you have adequate diskspace. If a driver is identified in the stop message, disable the driver or check with manufacturer for driver updates. Try changing video adaptors.

Check with your hardware vendor for any bios updates. Disable bios memory options such as caching or shadowing. If you need to use safe mode to remove or disable components. Restart your computer, press f8 to select advanced startup options, and select safe mode.

Technical information:

Stop:0x0000008E (0X0000005, 0XF7419CAD, 0XF6FF17E4, 0X00000000)

Setupdd.sys ? address f7419cad base at F73ED000, datastamp 48025277
 

http://www.techspot.com/community/topics/error-on-trying-to-install-new-sata-hd.204857/
Relevancy 16.77%

I an trying ti install a video graphics card, when I plug in to my pci ex slot and plug in the leads the screen does not work, but the computer does, now I see that I have a pnp monitor but the card and a vga adapter on it, I have tried everything possible but cant get to work, anyone any ideas?????????
 

http://www.techspot.com/community/topics/trying-to-install-nvidia-quadro-nvs-259-on-windows-7.204678/
Relevancy 21.93%

I m looking to build a tower server from scratch that ll support - incoming connections to a game that will be hosted on this server Budget - I m planning on running Linux on this PC it ll run graphics are unnecessary as this PC will serve only as a server Server Building a PC also the saves for the players don t take a lot of memory so I won t be needing a TB harddrive I ll be planning to upgrade the system in the future to support more users List of items I m looking at Intel Core i - k Crucial GB x D - DIMM Gigabyte GA-Z -HD ATX LGA Samsung E GB EVO SATA quot IPSG LG X DVDRW SATA OEM IPSG Carbide Series R Case EVGA NEX G W GOLD PS Subtotal UEZ Sales Tax Total This is a price quote and recommendation I Building a Server PC got from a sales associate from MicroCenter NJ What I m wondering is would these components be enough to support a hosting server of - people with minimum lag If the playerbase of the game increases would I be able to upgrade the system to support more players Would it be better if I bought a Server Motherboard that ll support more processor for future purposes Are there anything cheaper that I could use to start off with and upgrade to in the future nbsp

A:Building a Server PC

Servers don't need heavy hitting processors. The primary resources are memory, networking and file I/O

The 120GB drive is minimally acceptable, although if I were building a server, I would have at least two drives,
one for the server and the other for the data being served. Performance would be better and either drive could be
replaced/upgraded without disrupting the other - - also improves your backup media consumption.

Let's talk networking. Is this a private server for just LAN connected users or do you intend to have Internet connected players?

* hosting server of 20-30 people * in a lan based server says you will need a good switch connected to the router for wired users OR an access point for wireless

* I suspect you are intending a public server with Internet users {upgrade the system to support more players}.
You should read your ISP End-User-License-Agreement; unless you purchase a private IP address & Domain, the ISP typically forbids your hosting anything. They will cause you and your users all kinds of issues, such as limiting bandwidth and randomizing your public IP address.
 

http://www.techspot.com/community/topics/building-a-server-pc.203794/
Relevancy 20.21%

Just to be and Nvidia AMD: Features vs. Software clear I want NO ARGUMENTS This is a reasonable discussion The conflict between the two major GPU developers is as old as I remember and while the obvious answer in which is better depends on how much you want to spend and various subtleties in manufacturing Nvidia vs. AMD: Features and Software and releases the two generally leapfrog each other with every release I want to discuss what in terms of software support features and game coding each has over the other Lets start with what almost everybody knows Nvidia release drivers every time there s an actual update not the regular monthly update that AMD tend to do and while this probably results in better Nvidia vs. AMD: Features and Software updates it can mean a long time between problems getting fixed waiting for small fixes because a Nvidia vs. AMD: Features and Software big bug takes a long time to patch Nvidia have also developed the G-Sync for monitors which I barely know anything about - kind of the point of this thread a can anyone shed light on how this performs I ll update this top post as others provide feedback AMD s Mantle technology is becoming more and more widespread in new releases especially as AMD make more deals with game developers While my AMD GPU is too old to benefit from the Mantle updates it is doing well in trying to convince me to get AMD as my next card as well Again can anyone provide feedback on how the newer AMD cards perform on the Mantle-enabled games Cheers guys nbsp

A:Nvidia vs. AMD: Features and Software

ETF Soldier said:





Just to be clear, I want NO ARGUMENTS. This is a reasonable discussion.

The conflict between the two major GPU developers is as old as I remember, and while the obvious answer in which is better depends on how much you want to spend and various subtleties in manufacturing and releases, the two generally leapfrog each other with every release, I want to discuss what, in terms of software support, features and game coding, each has over the other.

Lets start with what almost everybody knows:

Nvidia release drivers every time there's an actual update, not the regular monthly update that AMD tend to do, and while this probably results in better updates, it can mean a long time between problems getting fixed (waiting for small fixes because a big bug takes a long time to patch).
Nvidia have also developed the V-sync for monitors, which I barely know anything about - kind of the point of this thread, a can anyone shed light on how this performs? (I'll update this top post as others provide feedback)
AMD's Mantle technology is becoming more and more widespread in new releases, especially as AMD make more deals with game developers. While my AMD GPU is too old to benefit from the Mantle updates, it is doing well in trying to convince me to get AMD as my next card as well. Again, can anyone provide feedback on how the newer AMD cards perform on the Mantle-enabled games?
Cheers guys.Click to expand...

Firstly I think both companies release drivers at pretty regular intervals at this point, every major game release at least entitles a beta driver minimum.

Your speaking about G-Sync I believe. It works very well for what it is which makes the monitor and GPU communicate together to change the refresh of the monitor live to match the output FPS in order to keep the game seeming as smooth as possible with no lag, frame tears, etc. Its an excellent piece of technology but you pay a 250+ dollar premium for a monitor with it minimum. Right now DisplayPort 1.2a added this to the VESA standard so now it can be done on monitors without the specific G-SYNC module however AMD is the only one to support this in the future when they start appearing but its still going to require some work from the monitor companies. G-Sync is awesome for high resolution and high refresh setups where stability is a bit harder to achieve.

BF4 with Mantle and surround going (Ill have my Asus UHD monitor today to try) is able to maintain easy 60 FPS ultra and thief is the same way. Those are the only two mantle games I have tried as I have not gotten around to getting one other game that supports it.
 

http://www.techspot.com/community/topics/nvidia-vs-amd-features-and-software.203796/
Relevancy 21.5%

Right first things first to mix it up a bit, I've started a minecraft server on an LINUX based operating system, I've followed all the steps that have been required to start the minecraft server and so on, I've portforwarded everything (something else about it comes up later) And done everything it has said to do. I've run minecraft servers before so I do know how they work

HOWEVER, Because I still want to keep the portforwarding on my main computer so that I will be able to host other things from it, I changed the minecraft server to 25566 and since doing that no one has been able to connect to it. The only way I can connect to it is the internal address:25566 and nothing else. Other than that it does not work at all.

Yes I have put the correct IP in
Yes I am using the external IP to connect to it but it won't allow me to join with the external IP address even if I put :25566 after it.

Any suggestions?
 

A:Require help on a minecraft server

You said you've port forwarded it. Then you changed the listening port on server. Did you also change the port forward rule on router?
 

http://www.techspot.com/community/topics/require-help-on-a-minecraft-server.203254/
Relevancy 16.77%

Hello all,

I've recently bought a HP Pavilion 15-n252sq laptop, with Free Dos - unfortunately I can't install Windows 7 over it, due to the following error I keep receiveing in the Installation screen:

"Select the driver to be installed" - and regardless of the paths I have and the available folders, I can not seem to proceed wtih the W7 installation.

Please notice that, I've tried to use both a W7 DVD and also a bootable USB drive (and yes, connected in the USB 2.0 port and not USB 3.0 ) - but I always get to the same point where I have to select drivers.

Please also notice that the BIOS doesn't allow me to make any modifications except for some minor ones (like select boot priority, or enable USB 3.0), as the rest of the MAIN features are greyed out .

Can anyone please help me with this issue?

Regards,
Adrian
 

A:HP Pavilion 15-n252sq - Can not install Windows over Free Dos

You may have to use a program Like KillDisk to reformat the drive. Then try installing your Win 7 DVD.
 

http://www.techspot.com/community/topics/hp-pavilion-15-n252sq-can-not-install-windows-over-free-dos.202523/
Relevancy 21.93%

I cannot get online whenever I try I get the following message in a software Update box. The server is unreachable. Retry the request. When I access network connections, the broadband connection symbol has a x over it, and there is this message. This connection is not available because there is a problem with your modem is network adapter. Can anyone offer any solution please
 

A:Server unreachable

Try to update the driver
 

http://www.techspot.com/community/topics/server-unreachable.201529/
Relevancy 21.5%

I know the parts are overkill for what I will be using it for to serve media to TV phones and pc s it will also back up my pc s weekly file server and questions Home server ftp sync to an offsite location I will be testing things like active directory and VMware because I use these are work but I cant really mess around with them to much there The server is will be running Windows Server R or R I haven t made up my mind yet I want to be able to leave the server on but have it go into a sleep mode until something is requesting data from the server over my lan or internet I know how to do this but I don t know if its good to do with RAID these are the parts I m using If you have any questions please ask me anything Fractal Design Define Mini http www newegg com Product Product aspx Item N E Western Digital Red NAS Hard Drive WD EFRX TB x in RAID http www newegg com Product Product aspx Item N E Rosewill TACHYON- W http www newegg com Product Product aspx Item N E Mushkin Enhanced Blackline GB x GB http www newegg com Product Product aspx Item N E ASUS GRYPHON Z LGA http www newegg com Product Product aspx Item N E Intel Core i - Haswell GHz http www Home server questions newegg com Product Product aspx Item N E Adaptec RAID T http www newegg com Product Product aspx Item N E SAMSUNG EVO GB http www newegg com Product Product aspx Item N E nbsp

A:Home server questions

Have you got a UPS? What's your question.

Also can you please tell me how you do the sleep mode? WOL when something requests access?
 

http://www.techspot.com/community/topics/home-server-questions.200648/
Relevancy 17.2%

Hello all,

My friend has a Canon 3-in-1 MF 4010 (Printer-scaner and copier) device. He has lost the manual. Now, how can I see whether is it installed on the machine (Windows 7 32-bit) or not? And if it's not installed how to install it?
Thank you.
 

http://www.techspot.com/community/topics/how-to-install-the-canon-mf-40-10-3in1.201448/
Relevancy 21.07%

We have a problem with the connection to our server. The server disconnects randomly from minutes to hours all day. I am at a remote location and connect via logmein to a local pc at the servers physical location to remotely control and connect to the server. A month or so ago the connection would drop every few minutes. The staff at that location replaced the switch and had the ISP tech check out the router. No problems were found. I think it is a problem with the server itself but don't know what it could be. Typically I can go through the login process and reconnect. I'm sorry I can't be more specific about the equipment since it is 40 miles away. Any suggestions on troubleshooting? Remotely?
Clearly I'm not a network guy.
Thanks for any help or direction
 

A:Network connection to server disconnects constantly

The usual suspects are:

(for DSL connections only) missing or faulty line filters
need to update the router/modem firmware at your end
packet reassembly overflow(a)
(a) very techie, but the solution is easy; see this description
 

http://www.techspot.com/community/topics/network-connection-to-server-disconnects-constantly.200706/
Relevancy 16.77%

I bought a Samsung 840 SSD (120GB) for my gigabyte GA-770T-USB3 motherboard. I am unable to install win 7 64bit on it. It is a SATA SSD.

I have tried ACHD mode in the BIOS, I have tried IDE mode. The drive works as I have tested it as an external drive on other computers.

I bought the drive specifically to be used as a primary drive.

My regular hard drives work fine on the motherboard.
 

A:Unable to install SSD on Win7 x64 system

Well, first of all, your motherboard only supports 3GB/s and the 840 is a 6GB/s drive. Just by that you won't really get your moneys worth. And how so are you unable to install? Also can you please list your system specs?
 

http://www.techspot.com/community/topics/unable-to-install-ssd-on-win7-x64-system.190141/
Relevancy 21.07%

Hello. I am a complete newbie to server administration. At my current job, I have been tasked with setting up a deployment server. The server is a Windows 2008 server and is not connected to the Internet. The server is a domain controller on its own domain (different from the main domain my job uses). How would I connect this server to the Internet without disrupting other users on the network? By disrupting, I mean connecting to my server instead of the main server for DNS and DHCP. The server has Active Directory Domain Services, DNS, DHCP, and WDS roles set-up.
 

http://www.techspot.com/community/topics/connect-server-to-the-internet-without-disrupting-other-computers-on-network.200167/
Relevancy 21.5%

I m working one replacing our file server at work The one we currently have was built around and is starting to show its age So I m thinking new server time The server will be for a copy shop that specializes in house plans and construction plans We store lots of large pdf and tiff files Also have a full service sign shop so lots of Illustrator and Photoshop files - may of the raster graphics are New server file FreeNas quite large ft x ft sign dpi takes up a lot of space New FreeNas file server The server will need to connect to - computers at any one time with upto printers amp copiers active on the network at any one time I already have a fairly decent switch with one port having gigabit Ethernet that the file server will be plugged into and there reset of the ports being megabit Ethernet ports of the files we work with are storage on the file server - form house plans to large commercial building plans to customer artwork and designs for both small format printing and large format They are loaded modified saved and printed while on the server I strongly discourage anyone storing files locally as there are no backups on the individual computers only on the file server Both local and through Crashplan Anyways onto the hardware I already have the process from another project that didn t pan out Intel Xeon E - V Ivy Bridge GHz Mobo SUPERMICRO MBD-X SCL-F-O Case Fractal Design Define R PSU Thermaltake Toughpower Grand TPG- M W ATX Ram Kingston GB x GB -Pin DDR SDRAM ECC Unbuffered DDR Server Memory Model KVR D E SK G HDD s Seagate NAS HDD ST VN TB x I plan to put the HDD into a Raid-Z which should give me about TB of space I have built several gaming computers and graphic design computers before but never a server I think I have a fairly good built here but would certainly welcome input from someone with more experience in this area than me nbsp

http://www.techspot.com/community/topics/new-freenas-file-server.200039/
Relevancy 17.2%

Hey how's it going. Any help would be great.
Had an older system so got a new motherboard and CPU. Installed it all and then no power when I try to switch it on. The orange modem light comes on but nothing else turns on.

New system-
Motherboard- z87-d3hp
CPU- i7-4770
Gpu- GeForce GTX 460
Ram- Kingston DDR 3
Psu- Shaw p4s6 860w.

Thank you

I also tried putting in one ram card at a time. Taking the graphic card out and using on board. Taking the motherboard out of the case to see if it was shorting out.
 

A:No power after motherboard install

Ratchetz said:





Hey how's it going. Any help would be great.
Had an older system so got a new motherboard and CPU. Installed it all and then no power when I try to switch it on. The orange modem light comes on but nothing else turns on.

New system-
Motherboard- z87-d3hp
CPU- i7-4770
Gpu- GeForce GTX 460
Ram- Kingston DDR 3
Psu- Shaw p4s6 860w.

Thank you

I also tried putting in one ram card at a time. Taking the graphic card out and using on board. Taking the motherboard out of the case to see if it was shorting out.Click to expand...

By any chance could you post a picture of your computer as it is hooked up right now so we can see if your missing anything. Try to check if the 4pin/8pin connector on the motherboard is hooked up and check for tightness of all the Motherboard connectors to start with.
 

http://www.techspot.com/community/topics/no-power-after-motherboard-install.199528/
Relevancy 21.5%

Hello
guys please I need your help, my laptop keep saying
Unable to connect to the proxy server what can I do to fit it please
 

A:Unable to connect to the proxy server

You are getting this message because the laptop can't find a wireless network to connect to...
 

http://www.techspot.com/community/topics/unable-to-connect-to-the-proxy-server.199618/
Relevancy 20.21%

Just upgraded form my old EVGA Superclocked GTX 570 to my new Palit GTX 770 Jetstream 4Gb, had to fanny around a lot with my Antec 900 case to get the beast to fit but everything seems fine now, card idles at 30-35c. Underload at around 65c. However the overclocking/temperature control software that came with the card, Thunder Master just does not quite seem up to par with EVGA Precision. Can anyone tell me if I can continue to use EVGA Precision safely and without any adverse effects with this Palit card because I just cant seem to get to grips with this Thunder Master. For some reason it trys to allways achieve 70c.
 

A:Temperature control software

andy06shake said:





Just upgraded form my old EVGA Superclocked GTX 570 to my new Palit GTX 770 Jetstream 4Gb, had to fanny around a lot with my Antec 900 case to get the beast to fit but everything seems fine now, card idles at 30-35c. Underload at around 65c. However the overclocking/temperature control software that came with the card, Thunder Master just does not quite seem up to par with EVGA Precision. Can anyone tell me if I can continue to use EVGA Precision safely and without any adverse effects with this Palit card because I just cant seem to get to grips with this Thunder Master. For some reason it trys to allways achieve 70c.Click to expand...

My recommendation is to use MSI afterburner for your temperature controlling needs and overclocking. It is non-biased and will work with any video card no matter the type, whether its amd of nvidia, and who made it.

Link here
 

http://www.techspot.com/community/topics/temperature-control-software.199318/
Relevancy 21.5%

Afternoon Ladies & Gents!

I've spent a few hours on researching this topic. I can't seem to find what I'd need.

Currently I'm looking for a solution. I have about 50 franchised offices. We've played a TV in each of them. Is it possible to put a device in each office and have a "Server" type device to push content over a VPN to them? Also naturally display this on the TVs.

Any comments or points in a direction would be much, much, appreciated.

Thank you!
 

A:Client-Server Media Streaming

Perhaps a Slingbox would work for this?

http://www.ehow.com/how_6187809_multiple-viewers-slingbox.html
http://www.slingbox.com
 

http://www.techspot.com/community/topics/client-server-media-streaming.198059/
Relevancy 21.5%

I have started to route CAT e cable to make a wired network I have a server running Server a custom desktop running windows laptops running windows I have the modem and the wireless router in issues to connecting network Having a server the library I have the modem connected to the internet port of the router and one of the loads is connected to a wall jack that Having issues connecting a server to network connects to a cable that runs about feet to its termination This termination is connected to a Having issues connecting a server to network port switch Having issues connecting a server to network The server is connected to the switch directly Based on my understanding my server should have access to the internet and my network should have access to my server With this setup I have full internet access on every machine but the server and I cannot access the server from any computer I have hooked up the server to a second wireless router as a load and was able to successfully access it through the second router but there is no internet The network on the server shows up as Unidentified Limited Access when directly connected to the switch Has anyone seen this before or have an idea to fix this issue nbsp

A:Having issues connecting a server to network

Load? It'd be easier if you drew a diagram. Some of the info is missing.
 

http://www.techspot.com/community/topics/having-issues-connecting-a-server-to-network.197147/
Relevancy 20.21%

Hi!

I remember when I first lost my Motorolas original CD, I couldn't find the software anywhere to be downloaded and no one that i knew had a motorola rzr mobile phone...

I found my old cd here a few days ago so I made an .iso file of it and uploaded it (as 13 .rar files, the file max size is 50Mb).

Here it is

Tel me if the link doesn't work or something.

http://cid-e198cc24bf261f09.office.live.com/browse.aspx/Motorola Razr?permissionsChanged=1&1
 

A:Motorola Razr v3 drivers and software

Yep that works for me.
 

http://www.techspot.com/community/topics/motorola-razr-v3-drivers-and-software.159146/
Relevancy 16.77%

Hey Everyone,

I'm not sure whether this is the correct place to post this (I'm new here). Sorry if it's the wrong place!

So my problem is I am running a laptop on windows XP. Every time I start up the computer, it prompts me to install device drivers (HID-compliant devices and stuff). The weird part is, I've already installed those drivers when I first got the computer. I've learned to just press cancel every time those prompts pop up, but I'm wondering if I'm able to stop them from popping up every single time I start the computer. I'm also curious as to why it's doing this. Any help would be greatly appreciated!

Specs:
Operating System: Windows XP Service Pack 3
Processor: Intel core 2 duo
RAM: 2GB DDR3 RAM
Brand: Lenovo R500
Graphics: Intel R 4 series express chipset family (on-board)
 

A:Drivers always prompting to re-install (windows XP)

I'm far from an expert, but why not let them install to see if it quits prompting you? If all else fails, you can roll them back. After all, they could be "updated drivers". Just my thoughts.
 

http://www.techspot.com/community/topics/drivers-always-prompting-to-re-install-windows-xp.196822/
Relevancy 21.5%

Hello,

Where I work we need a need new server. I am not really a expert in hardware so I hope you can give me a little help choosing a fitting server, I will use a template with answers to help you understand what's needed:

1) What is the available budget?
Up to 2500? (3380 USD, 2094 GBP).

2) Which tasks will the server execute?
GPS analyses which is pure heavy computing. The amount of reading and writing to the disc is moderate. Internet traffic is low.

3) There is any preferred brand or there is any that is out of question?
Any reasonable brand.

5) Does the size of the server matters?
Should be a standard rack.


6) There are any specific requirements (interfaces, storage etc)?
- 8 cores (1x8 [preferable] or 2x4)
- 16 G byte memory
- 4 Tera byte disc
- fast CPU

I hope somebody can help me with some suggestions.
 

A:Buy new server - suggestions needed

I would refer to this good article.

This seems like a pretty good server for your specifications: http://goo.gl/1rIcjH.
 

http://www.techspot.com/community/topics/buy-new-server-suggestions-needed.196717/
Relevancy 19.78%

Good evening fellas The Problem This is an issue I have never run into before on numerous builds My computer wont reset from pressing the reset button or through software reset I was able Computer wont reset (Hard or Software) to get through windows installation by pressing the power button and powering back up This is when I noticed a second issue My computer wont boot to windows with the USB mouse and key board plugged Computer wont reset (Hard or Software) in Front panel or back panel its just a black screen It will post with the USB mouse and keyboard plugged in as I am able to press F to get into bios I tried rearranging the front panel connectors on the mobo running with only the power button hooked up running with the front pannel usb hooked up and looking around bios for any relevant settings cant find anything there related to boot Once in windows I test my hardware by playing about hours straight of AC and doing burn in tests with no errors I am at a loss The Background I recently bought Computer wont reset (Hard or Software) a replacement mobo and power supply to replace a pair that fried due to moisture I bought a new case because I fell out of favor with my old case that had a window pane and led lights and I upgraded my ram to gb x gb modules Essentially I only kept my TB HD DVD-RW Video Card and CPU I tested all of the hard ware I kept in a friends system he let me use for the purpose and those components all burned in well after about hours of benching and burn in testing with no errors The Hardware Mobo Asrock N C-GS http www asrock com mb NVIDIA N C-GS FX CPU Phenom X BE GPU Pallet GT Sonic Edition http www newegg com Product Product aspx Item N E RAM GB PC http www newegg com Product Product aspx Item N E PSU Raidmax Hybrid W Modular http www newegg com Product Product aspx Item N E nbsp

A:Computer wont reset (Hard or Software)

A strange problem indeed.

Triple check your wiring is correct using your motherboard manual. Be sure the motherboard is mounted correctly on the standoffs and no grounds are occurring.

Faulty buttons on the case itself?

Reset bios to optimal defaults, clear cmos.

After that I would return the mobo.

Sorry I cant be more specific, Hope this helps.
 

http://www.techspot.com/community/topics/computer-wont-reset-hard-or-software.196539/
Relevancy 19.35%

My computer battery was replaced by a family member and when I boot up my PC which took about 10 minutes instead of 30 seconds. I noticed that the 2 harddrives were displayed in the bios as raid drives. The 2 harddrives are SATA. However in Windows when I right click on My Computer and select Manage then Device Manager they appear as NTFS format.

I sure that this configuration has something to do with response.

I would appreciate any suggestions on how to restore my raid drive back to 2 harddrives under NTFS without loosing my data. I would prefer a software tool or a step by step solution since I am not comfortable with manually making changes to computer settings.
Thank you for your advice in advance to this frustrating problem
Regards
Ntracs (Joe)
 

http://www.techspot.com/community/topics/converting-raid-harddrives-back-to-ntfs-with-software-tools.196141/
Relevancy 21.5%

I read online that some people, while making their server build, had to drill holes in the case's back plate or just buying another case. I was just wondering if with this case and motherboard, I would have to drill holes because I know that with server motherboards there isn't really a standard. Thanks to anyone who helps out!

Case: http://www.newegg.com/Product/Product.aspx?Item=N82E16811147155

Motherboard: http://www.newegg.com/Product/Product.aspx?Item=N82E16813182182
 

A:Server Motherboard with case help

You need to find a rack that can support E-ATX motherboards (extended ATX). Do you need a rack? Or is this just a workstation?
 

http://www.techspot.com/community/topics/server-motherboard-with-case-help.195224/
Relevancy 16.77%

Hi I have an all in one hp touch smart 520 pc and I have had it for about 2 years now and it doesn't do well with games and I was wondering if I can install a new better graphics card? if so can you recommend me one ?

thanks
 

A:Can I install a new graphics card on an All in one HP Touchsmart 520 PC?

I did some research and I found this
[
Expansion Slots:
1 PCI Express x16 module socket for MXM graphics card
2 PCI Express x1 mini card sockets
and
One PCI Express x16 Module (MXM) socket
MXM version: Type B
Power source = 19V
UMA or MXM Graphic card not exceeding 35W TDP
That is direct from HP. I asked today, because of your answers, HP support and I got the answer, that a Type II video card shut work as a upgrade on the inglewood motherboard. And don't worry. Bestbuy in Canada will upgrade the card in the store. But thank you anyway!

]
[
Yes, the MOTHERBOARD has those slots, no it is not upgradable after purchase, but good luck with that ]

apperantly the hp touchsmart 520 was never meant for gaming of high caliber and it cannot be upgraded :S


http://h30434.www3.hp.com/t5/TouchS...s-card-in-hp-touchsmart-520-1010/td-p/1128935

credits to that site.
 

http://www.techspot.com/community/topics/can-i-install-a-new-graphics-card-on-an-all-in-one-hp-touchsmart-520-pc.194772/
Relevancy 16.77%

Hey folks

where can I install a sd card reader on this unit there was a build in on the tower but I dont know where to plug it in the?



I have it pluged into 1 of the usb 2.0 ports on the bottom right now and the usb on the unit works but nothing when it comes to reading cards.
 

A:F2a85xm-d3h install of peripherals problem

What is the model of SD card reader?
 

http://www.techspot.com/community/topics/f2a85xm-d3h-install-of-peripherals-problem.194545/
Relevancy 21.93%

I posted this before with no answers I also posted this somewhere else with no answers lol So I m going to try more time I bought a motorola cpx series server at a auction I had no idea what it was and now I know it s a telecommunications server Although I really know nothing else about it I can t find any info on it anywhere either The tech that pulled it told me it works great just a with telecommunications What server ? to do out dated for What to do with a telecommunications server ? the state to use and if I don t have the equipment to use it it would make a awesome computer case lol I have no idea how to use this or even make it a computer lol I m alil techy I have built computers but What to do with a telecommunications server ? that s about all I know Looks What to do with a telecommunications server ? like this http thumbs ebaystatic com d w m mfQ ZtZGCaIxXoxNR I have posted on other forums for help and got nothing ANY help would be great thx If you have any questions or need to know anything about it I will answer what I can thx for the help nbsp

http://www.techspot.com/community/topics/what-to-do-with-a-telecommunications-server.194219/
Relevancy 16.34%

I got this laptop in for repairs recently and it has been a very tricky one I already told the client that I don t think it can be fixed but my curiosity has driven me to keep working on it This system came in unable to startup freezes during startup or said no boot device present I pulled the HDD out and scanned it from another computer Sure enough every error check would freeze around Note that I said freeze not display an error I would have to end task to close the windows drive check Chkdsk r from command prompt resulted in the same freezing partway through Disk copy and clone software would also freeze partway So during failure - drive after Toshiba Shuts OS install A305-S6898 off Satellite I copied the users files off manually and went to load a new Toshiba Satellite A305-S6898 - Shuts off during OS install after drive failure HDD in the laptop Every Toshiba Satellite A305-S6898 - Shuts off during OS install after drive failure time the OS install disk would load there would be Toshiba Satellite A305-S6898 - Shuts off during OS install after drive failure problems Sometimes it would freeze during the quot loading windows quot screen of the windows install Sometimes it would get to the install process and freeze right after selecting the disk to use Lately the most common problem is at variable points in the initial install loading process the system will just power cycle and restart At this point I ran memtest and found no errors Just the same I switched out the RAM and still it had problems I tried multiple different OS install disks and set bios back to defaults The problem persisted never being able to install a new OS I tried different hard drives external dvd drive and installing from a USB stick Oddly enough half of my repair utilities simply won t load things like seagate disk utilities paragon and acronis disk directors either freezing or giving weird errors like quot cd drive not present quot or quot memory not found quot The only thing that will run without freezing or restarting seems to be memtest which makes me think it s not an overheating issue since this can run for hours Frankly I m stumped It seems odd that the hard drive failed at the same time as whatever component is causing this problem so I assume either coincidence or some sort of drive controller failure that caused damage to the drive as well as making the system freeze while loading most any volume Any thoughts nbsp

A:Toshiba Satellite A305-S6898 - Shuts off during OS install after drive failure

Yeah, it may be a motherboard issue... Have you tried removing or resetting the CMOS battery?
 

http://www.techspot.com/community/topics/toshiba-satellite-a305-s6898-shuts-off-during-os-install-after-drive-failure.193323/
Relevancy 21.5%

Hello all members,
I was searching for dedicated server for one of my clients and whenever I find a new host, I try to test dedicated server speed by downloading sample files. Recently, I have tested atlantic.net dedicated server speed, but how can I be sure that this speed will remain the same for my client's after buying?

FYI, here is the link from where I have tested dedicated server speed:




atlantic.net/dedicated-servers/dedicated-server-speed-test.htmlClick to expand...


 

A:Dedicated server speed test

Hmm; would appear that you are referring to a network bandwidth test.
However, as I write this Atlantic.net is DOWN - - ping just gets 110% timeouts.

This link has some reviews you might like to see.
 

http://www.techspot.com/community/topics/dedicated-server-speed-test.192319/
Relevancy 17.2%

Hi I don't know if this is the right place to post this, but I couldn't find another place to right about my issue, I have the same laptop, and I have the weirdest problem!

My screen turns on but I can't install any OS, I have tried Ubuntu, windows 8, windows xp.... for example for windows 8 it shows a logo and then a blank screen, for Ubuntu I can't even boot from CD!

I have tried CD, usb drive
I have ran PC-CHECK, and it says no problem!
I have taken out the hd, and dvd drive to just boot from CD, and still nothing!

I have also updated the bios to the latest version from acer's website, this is so frustrating please help me
your help is appreciated in advance
 

A:Can't install any operating system

What is the make and model of your laptop? Have you changed anything in your Bios other then updating to the latest version? Did you update to the latest version of the bios before or after you started having problems?
 

http://www.techspot.com/community/topics/cant-install-any-operating-system.193122/
Relevancy 21.93%

Hello Guys,
I am looking for list of Public DNS server which like powerful one and I find a list like that:
(Powerful means that I like to have DNS server which should be fast, reliable, high speed and always available)
But I want more, anybody has idea how can I find more?

208.76.50.50
216.146.35.35
37.143.9.90
89.233.43.71
74.82.42.42
109.69.8.51
216.52.65.1
216.83.236.227
216.54.2.10
79.143.176.79
91.218.228.249
216.250.190.144
216.215.19.4
216.211.191.9
198.153.192.40
67.138.54.120
195.46.39.39
205.210.42.205
74.207.247.4
199.5.157.131
216.211.191.3
64.136.173.5
64.136.164.77
64.135.2.250
68.87.85.102
68.87.78.134
85.38.28.86
85.38.28.84
209.244.0.3
8.8.8.8
184.169.143.224
8.26.56.26
208.67.222.222
156.154.70.1
91.186.192.3
91.185.6.10
91.185.2.10



I am looking forward to hearing from you guys

Thank you so much


Yohann
 

http://www.techspot.com/community/topics/public-dns-server.193245/
Relevancy 16.34%

Hi guys I m a bit desperate right now Here s the thing I have an acer g English bought in the Netherlands out of warranty original HD GB western digital included with windows home premium The hard disk is dying Everytime I restart windows demands a launch repair that takes HOURS otherwise it won t boot and will restart I bought a brand new Momentus XT GB It was fairly simple to remove the original disk and replace it physically Problems start with trying to install an OS on the acer -First off I went to the bios and set it to boot up first with the optical drive so I can use the recovery DVDs that I created on day one when I purchased the laptop It just doesn t doesn t do anything when I put the first one and restart Only the prompt blinking and the disk even stops spinning -I made New hard on drive 7 5740 can't windows acer aspire install sure the DVD drive reads discs I put back my old hdd waited till I can use windows again hours after launch repair and tried to read many DVDs and they all seem fine -Back to New hard drive on acer aspire 5740 can't install windows 7 the new drive installed No recovery I researched a bit and found out that erecovery only works New hard drive on acer aspire 5740 can't install windows 7 on acers with the quot hidden partition quot on the disk that came from factory Gotta find New hard drive on acer aspire 5740 can't install windows 7 another plan -I downloaded a copy of windows GB and burned the iso file on a blank DVD with hopes of installing it and then activating it with my key - Inserted Windows DVD created with the microsoft tool Same problem no reading I check again if my optical drive can read at all checked it reads DVDs - At this point I m not sure what else to do What I want All important files I had in my old hard disk are backed up somewhere else I just need to get rid of the dying disk and replace it with my brand new hd and install windows on it and then activating it I just can t seem to do this any thoughts would be appreciated Thanks nbsp

A:New hard drive on acer aspire 5740 can't install windows 7

Try formatting the new drive using something like this:
http://www.ultimatebootcd.com/download.html
then try and install Windows 7
 

http://www.techspot.com/community/topics/new-hard-drive-on-acer-aspire-5740-cant-install-windows-7.192341/
Relevancy 20.21%

See the description in full on the Cisco.com/security site
 

A:Multiple vulnerabilities in Cisco ASA software

I read about this yesterday. This is a big exploit and needs to be fixed. Too bad there are too many newbies that wont know how to update the firmware or arent even aware of this issue.
 

http://www.techspot.com/community/topics/multiple-vulnerabilities-in-cisco-asa-software.191502/
Relevancy 19.78%

I want to buy a laptop to run professional recording software. The minimum requirement is an Intel Core 2 Duo E8200 2.67GHz. Can I use a quad core with less speed. What are my options?

Thanks
 

A:Help understanding minimum processor requirements for recording software

Is there a trial version of the software for you to test on your current system?
 

http://www.techspot.com/community/topics/help-understanding-minimum-processor-requirements-for-recording-software.191471/
Relevancy 56.76%

We had:

1) 1 Windows Server 2003 running Active Directory services to manage logon and permissions for file sharing.
2) 15 workstations.

We now want to have:

1) 1 Windows Server 2008 R2 server running Active Directory services to manage logon and permissions for file sharing.
2) 15 same workstations, with their same user profiles.

So I joined the 2008 R2 server to the domain, and then used the dcpromo tool to make it a domain controller.

Problem is, whenever I take the old server offline, (the 2003 one) everything flips out, logons are slow, and the 2008 server gives people trying to access shared files weird errors like that the server that authenticated them cannot be contacted, and asks them to log in again with their username and password before accessing shared files on the server.

What did I do wrong? I must be forgetting something.
 

A:Replacing a Windows 2003 AD DS server with a 2008 R2 AD DS server

1. Transfer all FSMO roles to your 2008 R2 server
2. Uninstall AD on 2003 server
3. You can now permanently take 2003 server offline
 

http://www.techspot.com/community/topics/replacing-a-windows-2003-ad-ds-server-with-a-2008-r2-ad-ds-server.189290/
Relevancy 21.5%

So computer A(brother) has hosted a minecraft server. Computer B(Me) can connect to it from the outside world. Computer C(Friend) can not connect to it, Also outside world. Computer B is 45 min away where computer C is a 45 sec walk down the rode, same ISP. Any help? We all would greatly appreciate it. Also so same thing is happening with a Teamspeak server, Computer A host, B able to connect, C still nothing.

Note: computer C can get on other Minecraft servers and other Teamspeak servers.
Thanks alot
 

A:One computer can connect to Minecraft server, another can't

If computer C can connect to other severs then most likely the problem lies in computer A. Check firewall rules, try disabling computer A's firewall.
 

http://www.techspot.com/community/topics/one-computer-can-connect-to-minecraft-server-another-cant.188700/
Relevancy 19.35%

My computer running Windows Ultimate -bit can no longer access my Western Digital Caviar quot Black quot TB hard drive that s connected but I suspect my data to still be in there so I wonder what data recorvery tools people have used and recommend This is one of the additional drives to my operating system C drive It has been formatted as NTFS and been working fine for several months until with recommendations Data format, from drive please lost recovery software a week ago Now it appears as the E drive on Data recovery from drive with lost format, software recommendations please My Computer as originally configured but the volume label is now blank I used to have that named as quot Media quot When I double-click on it to Data recovery from drive with lost format, software recommendations please enter the drive I get the Data recovery from drive with lost format, software recommendations please error message quot E is not accessible The parameter is incorrect quot In Computer Management -- gt Storage -- gt Disk Management the drive appears but it s File System is now indicated as RAW rather than NTFS I have tried using Active Partition Recovery and that successfully lists my drive with the original label name quot Media quot and as NTFS and also lists the folders located at the root of the drive which is why I suspect my data to still be in there and recoverable However when I use this tool to do a full scan of my disk it freezes after scanning MB There are tools out there with varying reliability so whch ones do people here recommend another tool I trired I forget its name was scanning my disk but prediced days to go over the entire TB so that s out of the question I have been told to use a tool that can recover files onto a separate disk rather then try to repair the original disk and risk losing more of the original data Any advice would be greatly appreciated Thanks nbsp

A:Data recovery from drive with lost format, software recommendations please

Oh crap. Something like this happened recently to me when I had backed up some data to an USB thumb drive. It worked fine for awhile, then some weeks later, my PC just couldn't read it anymore (kept saying "disk in drive needs to be reformatted/etc"...and the properties for the drive also showed it as RAW format instead of FAT32 like it would have been usually).

I think the issue is drive corruption, which seems to be fairly common with external devices like USB drives, but odd in the case of an internal drive. The remedy for me was to try to access it from a different system, which was easy since being a USB stick I could try it elsewhere easily. If you can use another system to access the drive, preferably a Linux/Ubuntu based one; it is likely your best bet to recoup the data before its lost permanently. An external HDD kit would be ideal, and they are quite cheap also.


Hope this helps!
 

http://www.techspot.com/community/topics/data-recovery-from-drive-with-lost-format-software-recommendations-please.187901/
Relevancy 16.34%

I recently purchased a GTX and after installing it and rebooting my computer once windows fired up I noticed my speakers were making a high pitched noise along with fluctuating static Upon further investigation I realized my audio was also not working Here are some things I have tried to remedy the situation - Checked the speakers They work perfectly on another computer likewise I still get install new audio buzzing, no video after card Speakers the noise when I tried a different set of speakers and a set of earbuds in the problem computer - Tried changing the video card out with the old GTX didn t work - I have tried uninstalling reinstalling both audio and video drivers using these instructions http www Speakers buzzing, no audio after new video card install evga com forums tm aspx m amp mpage with drive sweeper again to no success - Speakers buzzing, no audio after new video card install I have swapped out PSU s and still get the problem - I have tried doing a fresh windows install with a spare HDD and I still get the noise as soon as windows boots I have figured out that if I go in to Device Manager under System Devices and disable one of Speakers buzzing, no audio after new video card install the High Definition Audio Controller there are two but the other is associated with my video card then the noise will stop At this point I am pretty perplexed as to what is causing this Could something on my board have been zapped I m out of ideas for a fix any help ideas would be greatly appreciated ASUS x Sabertooth mobo Intel i - Bloomfield GHz Quad Core EVGA GTX GB Corsair Vengeance DDR RAM Kingston SV GB SSD WD Black TB RPM HDD Corsair HX Watt PSU nbsp

http://www.techspot.com/community/topics/speakers-buzzing-no-audio-after-new-video-card-install.187870/
Relevancy 21.07%

So we have a server at one of the places I work that is a domain controller and DNS server website domain server controller pointing DNS to of instead address as well as an smtp server The domain is named companyname com The website is you guessed it companyname com Now why they set this up like this I don t know but because they have every now DNS server pointing to domain controller instead of website address and then the DNS server decides to point companyname com to the domain controller and ignore the fact that I have a www Host A record pointing to the web server s external IP address and a record saying DNS server pointing to domain controller instead of website address that DNS server pointing to domain controller instead of website address companyname com should also point to the web server s address The problem seems to stem from that when the server reboots for updates it of course forces the DNS server records to update and it puts an entry in there that contradicts my static records with the domain controller s local address in for companyname com Can I force it NOT to put a certain entry in there or rather not update a certain entry that it has in there Or can I force it to treat my static records as primary I m fairly new to this as I ve not dealt with this issue before and I m out of ideas nbsp

A:DNS server pointing to domain controller instead of website address

Hmm; for the External DNS accessible to the web

create a CNAME for www.company.name
create another for dns.company.name.
each pointing to unique IP addresses
this dns ONLY supports publicly available services; NOTHING internal

the Domain Controller should have a SEPARATE DNS, internal to the LAN, not accessible to the Web.
Internal users configured to -> internal DNS which performs recursive lookup to your ISP's DNS.
 

http://www.techspot.com/community/topics/dns-server-pointing-to-domain-controller-instead-of-website-address.187372/
Relevancy 22.36%

Recently I set up a server just for what I thought was fun of doing it. but now I'm having a hard time deciding what to do with it. I don't necessarily want to sell it, but I need to do something with it so its working for me rather than me working to keep it up and running.

(for a do it yourself project I don't see it being worth anything/attractive to anyone else. if it is I'm not sure how to go about selling it. this would be terms of how to make it appear attractive to a potential buyer, if I could ever find one.)
 

A:What should I do with my server?

You could have all your desktops and laptops back up to it on a regular schedule. Can also store all your media on it and then buy the smaller faster SSDs for current systems.

Perhaps some more information about your other computers and networkable devices is needed before a very good answer can be given.
 

http://www.techspot.com/community/topics/what-should-i-do-with-my-server.185843/
Relevancy 21.93%

Please help!!! I give my friends the exact IP and it says "can't reach server" On my computer it works perfectly. They try direct connect and it doesn't work either! I've tried unblocking the windows firewall.

Minecraft Version: 1.2.5

Operating system: Windows 7
 

A:My friends can't get on my server

More then likely you need to unblock the ports on your router. **Updated: I assume this "server" is your minecraft server as you stated minecraft, the ports I listed are for minecraft**

If you are familiar with unblocking ports on the router then Unblock ports: 25565(TCP) and 25565(UDP)

If you are unfamiliar, you may need to look up a guide for your router. Or tell me the model you have and I will do my best to help you unblock the ports.
 

http://www.techspot.com/community/topics/my-friends-cant-get-on-my-server.181867/
Relevancy 21.07%

Hi I got from a friend his old computer that according to him it wasn t working anymore The MB its a Gigabyte GA- I p-G I got it running My idea for the computer is to use it as a small media server to stream to my tv s Now HDD motherboard IDE regarding about Home SATA question server & here comes the Home server question about motherboard regarding IDE & SATA HDD question this motherboard has Home server question about motherboard regarding IDE & SATA HDD IDE ports and SATA ports Can I use ALL of the ports I want to get it fill with HD s to save all my media thats why I am asking Will it work with all the ports full I dont want to spend money in a entire new computer right now I dont know if it can work with all IDE used plus adding SATA HD I want it to end like this IDE GB HD MASTER DVD DVD-RW SLAVE IDE GB MASTER GB SLAVE SATA TB SATA TB I am Home server question about motherboard regarding IDE & SATA HDD just missing right now the sata HDD s and plan on buying them but I want to be sure I have the manual but it doesn t say anything about conflicts or something do you guys know anything about it Here is the link for the MB specs and manual http www gigabyte com products product-page aspx pid sp nbsp

A:Home server question about motherboard regarding IDE & SATA HDD

I recall comments re mixed IDE + SATA but don't recall the specific reference.

What should work is:

bootable system on one device (eg IDE)
storage device(s) shared (eg SATA)

 

http://www.techspot.com/community/topics/home-server-question-about-motherboard-regarding-ide-sata-hdd.184490/
Relevancy 17.2%

I have been doing research on purchasing 4-bay+ external RAID enclosure for myself. I have done research on software vs. hardware raids for this system, but one question still eludes me; so I am going to ask it here directly.

If I buy software RAID enclosure I will have to use some included software to set-up my raid. So, if I take my enclosure to another PC and plug it in (let's say eSATA) I will not be able to read the data, correct? If I get true hardware raid, the raid set up will be on the build in controller so I will be able to take the enclosure from computer to computer, right?

And since TS has new poll feature lets try it out...
 

A:Hardware vs. software RAID on 4-bay+ RAID enclosure

Regardless of whether you use software or hardware RAID, the enclosure will work whatever you plug it into. The only thing that might not work is connecting an individual disk (used as part of the array) into a device. It all depends on whether the device in question can read the controller used for the RAID set up.

For example, I ran with RAID 1 for two 2TB hard drives in my PC, but I can connect one of them to the same device as a non-RAID disk -- which I successfully did when the RAID broke down for an unexplained reason.

However, it is unlikely to work in a computer, and you should approach it as not working at all in anything but the RAID enclosure. It's also worth pointing out that splitting RAID disks in such a way could corrupt the data. Given that pretty much every decent RAID enclosure worth its salt will include gigabit ethernet at the size you're looking for, availability shouldn't be an issue across your LAN.

Hardware-based RAID arrays are also more reliable in operation, and have the extra benefit of being recoverable in a controller failure by replacing it with the same version as before. Software RAID's are less reliable, slower performing and in the event of a controller failure can be difficult to bring back online.

Basically, when it comes to RAID arrays, don't skimp on cost. The better the quality/controllers the more reliable and better performing it will be.
 

http://www.techspot.com/community/topics/hardware-vs-software-raid-on-4-bay-raid-enclosure.185358/
Relevancy 17.2%

I bought a Crucial M4 SSD (64g) for my PC but it appears it's supposed to plug into a laptop how do I hook it up to my motherboard/is it possible?
 

A:How do I install my SSD in a desktop?

The SSD will need 2 connections:
- SATA cable which goes to the motherboard, should come with your motherboard or you can buy one for very cheap
- Power connector which comes from the power supply.

They're the same cables as what your existing HDD is connected to.
 

http://www.techspot.com/community/topics/how-do-i-install-my-ssd-in-a-desktop.184994/
Relevancy 21.5%

Hi all this is driving me nuts Fresh windows SP setup Problems Server on 2003 reading USB HDD 2TB x Buffalo tb external USB hard drives It worked for me a few day ago with no problems I was able to read and write Yesterday I went to configure backups and this is what is happening Drive detected in device manager in disk manager comes up as basic disc with partition of GB but doesn t say NTFS and so has no drive letter when clicked Problems reading 2TB USB HDD on Server 2003 on properties getting error message quot The operation canceled due to an internal error quot If I try format partition diskman locks Problems reading 2TB USB HDD on Server 2003 up I can delete partition ok Tried creating a small Gb partition but still having same issue I can read USB memory sticks ok All hdds are behaving the same way on server All are perfectly workable on another computers W XP I have tried re-installing chipset drivers - didn t help The only major change I can recall since it was working - ESET Antivirus was installed but I don t think it could be a problem Please Help nbsp

A:Problems reading 2TB USB HDD on Server 2003

Usually you will need a 64 Bit system to be able to read any drive with a total compacity of over 500 gigabytes. If possible I would suggest upgrading to Windows Server 2012 in order to fully take advantage of your TB drives.
 

http://www.techspot.com/community/topics/problems-reading-2tb-usb-hdd-on-server-2003.184297/
Relevancy 21.93%

I want to make a gaming server with a micro Atx motherboard , but I'm not sure what I would need the most . I mean money being tight , should I look for 1 that holds alot of ram or just settle for 1 that hold 8 g or so. Also with Processors being so high should I get a AMd quad or would something smaller work. This server will just be for me and my friends , maybe 20 ppl at the most. I talked to a guy about it before he told me I needed at least a quard core and over 8 g of ram, and 500g hdd. I guess I'm just maken sure before I spend the money.
 

A:What should I look for in a server motherboard?

There is a server class of motherboards but I don't think that is what you are looking for. Building a PC with server class parts can get very expensive. I see no reason why you would need a server class PC to play games, unless you wanted a motherboard with two/four CPU sockets

Questions:

What is your budget?
What types of games will you be playing?
How many monitors and at what resolutions will you be using?

 

http://www.techspot.com/community/topics/what-should-i-look-for-in-a-server-motherboard.184663/
Relevancy 21.93%

So, say, I wanted to make a certain website in the UK think I was in the UK. Theoretically.

How would I go about doing that?
 

A:Proxy server

gwailo247 said:





So, say, I wanted to make a certain website in the UK think I was in the UK. Theoretically.Click to expand...

Yet subject is PROXY SERVER; which is it? Please describe your intent - - btw: Physicality is not relevant here.
 

http://www.techspot.com/community/topics/proxy-server.184016/
Relevancy 21.5%

I have a minecraft server, but I can't forward the port with my router. I believe the issue lies with the "LAN port" option. I don't know what to put for that.

I have a Netgear 7550. Can't seem to find any information on the router from netgear. My ISP is ATT.
 

A:MInecraft server port forwarding help

did you see the TUTORIAL on the subject? . . . if not, go to that forum and do some reading
 

http://www.techspot.com/community/topics/minecraft-server-port-forwarding-help.184159/
Relevancy 20.21%

So about once every 30 minutes, my keyboard, disconnects, and reconnects. Like it's being unplugged, and re-plugged back in. It is not the keyboard, or the USB port I am using. I have tested it in several different USB slots, but the same problem happens. It is software related. And is bugging the living hell out of me. I have reformatted and the same exact problem happens. And my friend has the EXACT problem but with his mouse.

Any advice would be greatly appreciated. I have googled the problem and searched, but nobody has a real solution.

Thanks!
 

A:Keyboard software issues?

Some relevant system specs-

-Running LEGIT version of Win7 64bit
-8gb ddr3 Corsair Vengeance 1600
-ASUS P8Z77-V LK Intel Z77 Chipset
-Intel Core i7 2600k
-1tb 6.0gb/s 7200rpm Western Digital HDD
 

http://www.techspot.com/community/topics/keyboard-software-issues.183811/
Relevancy 17.2%

I got my 6950 today, but it's not working........

Step1:I disable my old graphic card
Step2: I change the old g.c to my 6950 at the same spot.
Step3:install my driver.. But it is not working..

And 1 thing I dont get. After I done all 3 steps, and it's not working. then I uninstall my new. g.c driver and enable the old one. and it works pretty fine... is there a build-in graphic card?? if so, the one I took one out is??

reply asap pls...
 

A:Can't install my new graphic card

BTW: the fans of my new G.C is actually working so I think I put in the right spot.. but cant detect it!! im so confuse!! awww
 

http://www.techspot.com/community/topics/cant-install-my-new-graphic-card.183493/
Relevancy 21.5%

I am experiencing the problem described below responding not DNS server Primary is I got an internet from provider which is LAN cable sticking from the wall - and it works fine when I connect via LAN cable - when I write the IP Address Subnet Mask Default Gateway and DNS servers on the LAN adapter and create a PPPoE connection with username and Primary DNS server is not responding password I want to do the same but wirelessly I have an ASUS RT-N LX wi-fi router - and connected the cable from the provider to the WAN slot on the router Then I have accessed the router from my laptop http - and configured everything as it was on my laptop IP Adddress Submask Default Gateway DNS DNS Wireless network works fine Primary DNS server is not responding the default gateway is pinging - but DNS Primary DNS server is not responding servers are not accessible As a result no internet connection available Moreover - when I want to ping the DNS ping - I tries to get a response from other location but no response from there Any feedback hints comments will be greatly appreciated I have spent days for it but in vain THanks in advance nbsp

A:Primary DNS server is not responding

192.168.1.250 & 192.168.1.10 have been configured at one point in time to be the dns servers set in the router. Obviously they do not work now... I would recommend changing them to maybe an open dns ip: 208.67.222.222 & 208.67.220.220, or even google's dns of: 8.8.8.8

Hope this helps, take care!
 

http://www.techspot.com/community/topics/primary-dns-server-is-not-responding.181946/
Relevancy 21.07%

So my girlfriend and I have been playing MC for a while now on my server (separate households) and no problems have occurred until now. I have not changed any settings of the server or my router settings, but now all of a sudden she gets a "connecting......." message with a follow up "failed to connect" error. My port forwarding is fine, and so is the ip address I am giving her to connect.
And ideas to what may be wrong here?
 

A:Another classic Minecraft server connection issue

Ok, this one has been blank for a few days so I'll take a stab at it!

So you are hosting a game on your pc that your gal connects to. You have port 25565 forwarded to your pc running the MC server. You have given your gal your real world ip address so she can connect to your server. When she connects she gets a "connecting..." error. Have I got all of this correct?!?

Assuming all the above is correct, here's what I think... More than likely your ISP gives you a dynamic IP address, meaning it can change from time to time. To make sure you know what your "real world" outside IP address is, go to: http://canyouseeme.org/ this will give you the correct "real world" ip address. While you are there, check to see if the port is open for MC. Have the MC server running before hand, go to http://canyouseeme.org/ and type in port 25565, the website will tell you either "success" they were able to connect, or "fail" they were not able to connect. IF you get success then you have everything configured correctly on your end it may be something on her end - if not, then it's something on your end. Make sure your gal is connecting to that IP, on port: 25565 inside of MC. MC may or may not ask for a port number, I'm not 100% sure on that one because I do not play MC. IF she is still getting the errors, she needs to check her software firewall settings (built into win xp, vista, 7) or 3rd party "internet security" software often has a software firewall as well. In the firewall settings, TCP port 25565 outbound needs to be permitted. If that is already in place or NOT an issue to start with, make her power cycle her internet connection (cable, dsl, t1, etc.) and her router. (the devices may be one in the same) Have her try again, if still no dice... Post back & I'll think of something else for you to try.

Hope this helps, take care!
 

http://www.techspot.com/community/topics/another-classic-minecraft-server-connection-issue.181421/
Relevancy 21.93%

Recently Windows updated both my partner's and my laptop with 23 updates for Vista. Ever since those updates over the weekend my partner keeps on getting a proxy server window appear on his desktop asking for a password.

We have Virgin wireless broadband and changed over from 3 Broadband. I told my partner to uninstall 3 Broadband, which he has done but it still comes up with this window. We have gone into all the Internet connection windows and unticked any option for a proxy server and it still comes.

Is there anything we can do that we haven't tried yet?

Compused
 

A:Proxy server

Ok, this question is quite old, so I'm going to take a stab at it!

I'm assuming that since you have Virgin wireless and going from 3 broadband that you are in the UK. I have zero experience with anything in the UK as b/c I'm in the US. Nevertheless, I'm going to try and assist you the best I can.

I'd say uninstall all Virgin wireless & 3 Broadband software that is on the computer. IF the virgin wireless connection is a regular wireless router in your home, then just simply connect to the wifi network is shows when you use the built in wifi software for windows, enter the wireless password & you should be good to go. IF the virgin wireless connection is a USB adapter, then reinstall the software accordingly, run the program and it should connect. As for this proxy window popping up, I'm really not sure why it's doing that, is it a windows proxy window or a window from the virgin wireless software?! either way, take a screenshot & post back.

Also post back specs on the system in question, info on the type of wireless connection you have from virgin wireless (USB, PCMCIA, wifi hotspot device, etc.).

Hope this helps, take care!
 

http://www.techspot.com/community/topics/proxy-server.180946/
Relevancy 16.77%

just recently received my Samsung SSD to install my windows 7 ultimate finally after a bit of time messing with that I got windows completely installed so I can either boot off the hdd or my ssd. I have had no luck figuring out how to get drivers from the hdd to ssd though. I can't even get on internet to try looking for drivers. so I tried backing up drivers on the double driver program I've tried burning backup divers to disk. can someone please tell me how to my drivers restored on my ssd!
 

A:Fresh install OS to SSD driver backup

I have no idea why you can't get on the internet. By default windows 7 has supports almost every (if not every) on board ethernet ports. If not then you'll have to get at least the lan drivers for your motherboard and then download the rest of the drivers you need once you get the onboard land running.

Is this a laptop, desktop ? If its a desktop did you build it yourself? If not what make model is it? You can go online to the manufacturuers website and download device drivers for your laptop/desktop.

If it is something you (or someone else) built then there should be a driver disk that came with your motherboard.

Alternatively you could use driver genius to get the job done. I'm not sure if the "free" version allows you to backup drivers but I know the paid one does.
 

http://www.techspot.com/community/topics/fresh-install-os-to-ssd-driver-backup.181310/
Relevancy 17.63%

I am about to build my new system and for the first time I will be using an SSD (128 megs). I know to install the OS but what about security software as well?

Anything else? I will also have a 1TB hard drive as well for storage.

Thanks.
 

A:What to Install on an SSD besides the OS?

I don't have a lot of programs that I use on a regular basis, so those would go on for me. Fast program startup is nice. Aside from that, I'd personally have nothing else that I access much at all really.
In general though, choose things that you access often.
 

http://www.techspot.com/community/topics/what-to-install-on-an-ssd-besides-the-os.181042/
Relevancy 19.78%

Hi, I'm building a new system because trying to work on an athlon x2 240 involves too much self harm.

I have been reading around, and it seems that the 2500K is generally better in all regards despite having 2 less cores.

My main priority is rendering time in 3ds max, so regarding that, which cpu would be the better buy?

Thanks
Astralogic
 

A:Which of these CPUs is best for 3D software redndering? 2500K or 1100T?

It turns out that the 100T is better for 3ds max. I was afraid the 1100T would come out on top, I spent ages researching the right motherboard to get with the 2500K now I gotta start again

You wouldn't happen to know an AMD board that is the equivilent to the GA-Z77X-UD3H do you? Or the G1-Sniper M3?
 

http://www.techspot.com/community/topics/which-of-these-cpus-is-best-for-3d-software-redndering-2500k-or-1100t.180409/
Relevancy 21.93%

Hi all So the situation is thus we are looking into getting a new office NAS server? for server for our office currently all individual desktops and laptops and have been given a quote that has come in considerably higher than we d anticipated Part of this is due to the addition of a tape auto-loader as a backup device which is coming in at including tapes The benefits we ve been given for this are tapes being more robust especially if being take off NAS for office server? site and more secure than hard drives but I have a concern at how accessible the data is should we need to resort to accessing the backup This got me to thinking would a NAS device or multiple with hot-swappable drives used in a similar way provide the same functionality as the auto-loader but at a much cheaper cost And if so what would people recommend for this I am fairly well versed on consumer devices from the likes of Synology and we already have a Lacie NAS in the office for general file storage though it s not been that relaible but I have no experience with multiple bay hot-swappable models Is there a particular brand I should look at that offer more commercial devices or would a -bay Synology be fine Thanks in advance grinthumb nbsp

A:NAS for office server?

You are into the area of planning called "Business Continuation"; how do you continue
when there are different levels of failure?

Consider (list in order of difficulty):

drive or system fails
building becomes unusable (fire / floor/ storm)
city takes a tornado / hurricane hit
county / state looses power

In addition, tapes per se are frail media and for long term storage, need humidity and temp controlled storage - - and regardless, the magnetic info degrades and/or 'imprints' from one layer adjcent to another. We saw this with IBM and tapes stored at Iron Mountain.

Local backups (ie store onsite) work well for all variations of (1) and off-site storage
only delays the recovery time.

(2) will likely wipeout all local backups (tape or otherwise) and is why off-site is necessary.

(3+4) makes the point that off-site storage is viable ONLY when it is outside the area of the disaster.

IMO, tape is a dead media - - what a mess if you need to use a backup set and find that after mounting several tapes in a restore you find that the nTH tape is unreadable :OUCH:

a) you ask the right question; which NAS systems are most reliable?
Google for "review scsi nas with hotswap".

b) get a SCSI enclosure with several bays and implement Raid-1 (mirrored)
with auto-rebuild to avoid hard stopping the system while a new drive is brought online.

c) determine the degree of effort to recover 'lost data'. It is impractical to take
a drive offline every day, so what period can you tolerate between HD rotations?
(suggest one per week + one per month = 8 drive in rotation pool).
Then keep last weeks drive local and all else offsite.

my $0.02
 

http://www.techspot.com/community/topics/nas-for-office-server.178981/
Relevancy 21.5%

I've been trying to run a port forwarded minecraft server. i have port forwarded the port "25565" (the minecraft server's port) on a UDP and a TCP protocol. i use the private IPv4 address (192.168.***.***) and i give my friends my external IP address to connect with.

however, when it comes to connecting, they aren't able to get in the server whilst i can =/ I've looked at a port checker and whilst the server was up and it agrees that the port "25565" is open. yet my friends still cannot connect.

I've tried adding new inbound rules on my window's firewall. however i do have Norton 360 which has a firewall of it's own.

if anyone knows anything it'd be really appreciated. thanks.
 

A:Friends cannot connect to my Minecraft server

you have norton firewall and a windows firewall, try turning them both off and see if it works, then turn on each one and see which is the problem.

I bet its norton..

my son runs a a minecraft server and he has no issues on his W7 PC after i set the portforwarding on the home router
 

http://www.techspot.com/community/topics/friends-cannot-connect-to-my-minecraft-server.179100/
Relevancy 20.21%

Hello dear brothers,
iam very sad and unhappy also iam in tention plz help me '
suddenly have formated my partion .
And there was alot of my editing and recovery and other alot of softwares was in it now my partition is empty and i want to recover my all softwares i tried alot but softwares not recovering plz brothers help me plz help me iam very worry because i want to recover my all softwares
plz urgent help me plz how to recover that all softwares help me hope u will help me.
 

A:Formatted partition and want to recover software

Take a look at this:
http://www.easeus.com/datarecoverywizard/recover-formatted-partition.htm
 

http://www.techspot.com/community/topics/formatted-partition-and-want-to-recover-software.178895/
Relevancy 21.93%

Hello,

I currenlty have a Dell 750 and need to find a new server w/ as much power but can also take a PCI 5.5 card.
 

A:Looking for a server that can take PCI 5.5 cards

What exactly is a PCI 5.5 card?
 

http://www.techspot.com/community/topics/looking-for-a-server-that-can-take-pci-5-5-cards.178072/
Relevancy 18.49%

I'm new to the forum but have a problem that I want make the right decision on. I play Aces High II which is a flight simulation game. It may not be as hard core as Battlefield 3 but they do keep upgrading to high res graphics. My computer is a prebuilt Dell Studio XPS 8000. Intel i7 core 860 processor @ 2.8GHz. Graphics card a Nvidia geforce GTS 240. 8 Mb memory, Windows 7 home premium os. Now that said I am experiencing stutter sometimes while i'm playing. My fps go from 60 which is where it should be to 10 or less. I,m not sure if this is the game card or a lousy connection to the game server as we do get discoed sometimes. The computer is a year and a half old and don't remember experiencing this before that much. Any advice would be greatly appreciated. I'm not against getting a new card and probably need new power supply.
 

A:GeForce GTS 240 issue or gaming server issue?

What resolution are you playing at? What is your budget for your upgrade?

Its your gpu more than likely
 

http://www.techspot.com/community/topics/geforce-gts-240-issue-or-gaming-server-issue.177654/
Relevancy 21.5%

My server is a domain controller thus i cannot add users with admin rights and so i cannot use lusrmgr.msc to add or change... i've added the user i want =active directory>users> and added the user and set it to admin..but when loged onto does not have the admin rights... learned that this was becuiase it was a domain controller
 

A:Add users to domain controller server

Correct, the DC admin has the keys to the kingdom and can create a user-id with/without admin privs.

Unless the admin is your very best friend, I would expect exactly what you are reporting.
 

http://www.techspot.com/community/topics/add-users-to-domain-controller-server.177336/
Relevancy 21.5%

Hello I am having a very strange problem between of the computers at work small business problem Server/network - we pay for IT support but they say that they cannot find a problem so therefore are unable to help I ll try to explain the problem - We have a server network with computers and phones Computer computer is where the IT support have looked but see no problem On all the computers we have Roboform toolbar and programme and also Avaya Phone manager Computer - sometimes logs in to Computer s Phone Manager automatically without asking which causes Computer to make phone calls through Server/network problem Computer s phone We have spoken to the software developers who also have no idea how to help Now computer is also logging in to Computer but on roboform which means they have full access to all computer s passwords which they have saved I deleted the Roboform profile on Computer and created a new profile - but when I checked on Computer - their profile is now deleted and is now logged in as Computer Again contacted software developers who have no idea I hope some of that makes sense If someone has any ideas please let me know it s driving me mad and also very unsecure Thanks Jai nbsp

A:Server/network problem

Avaya IP Office Installation:
Please read the FAQ and see / verify the issues discussed.

When you follow-up, tells us what you did and the new status.
 

http://www.techspot.com/community/topics/server-network-problem.176975/
Relevancy 17.2%

Hi, I have an ibm pentium 4 cpu and I have only 256mb of ram on it. I tried to intsall more ram but it won't accept any other sticks. Stumped.
 

A:Can't install more ram on my IBM Pentium 4 CPU 1.60ghz

Not enough information.

Which computer do you have?
Which RAM frequencies does your computer support? (DDR 266, DDR 333, DDR 400, etc...)

Which memory module are you trying to use for upgrade?
 

http://www.techspot.com/community/topics/cant-install-more-ram-on-my-ibm-pentium-4-cpu-1-60ghz.176722/
Relevancy 19.78%

Hello guys Can you help me My friend has this Lexar USB Flash Disk She asks me to delete some folders and even the Secure II folder We thought that it is nothing because Lexar not II Windows 7 the software recognizable Secure after removing in usually if it s the application of the USB it should have been the name of the USB like for example in Western Digital I have this external Lexar not recognizable in Windows 7 after removing the Secure II software USB WD it also has an application inside it but the name of the folder is WD Anyway since the folder got deleted once we put the USB to any ports of our laptop PC and even in the television it s not recognizable The drive is not detected at all Lexar not recognizable in Windows 7 after removing the Secure II software even though there s a drive G for removable drive With this I searched for a solution and I found some solution but it did Lexar not recognizable in Windows 7 after removing the Secure II software not work for me - In disk management you have to changed the drive rebooted the PC even having the Secure II downloaded application that was deleted Unfortunately I cannot copy it inside the Lexar USB because it s not recognizable And in the device manager there s no exclamation point All drivers are okay Any resolution Thank you nbsp

A:Lexar not recognizable in Windows 7 after removing the Secure II software

"Any resolution?"

Yes, replace the Lexar
 

http://www.techspot.com/community/topics/lexar-not-recognizable-in-windows-7-after-removing-the-secure-ii-software.176681/
Relevancy 19.78%

Hi guys, bought a new PC recently and got everything set up fine, except the GPU.

Its all installed correctly but when I go to install the drivers from either Windows Update or the given CD and restart to save changes, I lose video signal.

I see the boot screen and Windows 7 loading bar, afterwards my screen says "Mode not supported".

I'm using the Nvidia 560 Ti and my screen is a Samsung LE19R86BD.

Is the installation possibly switching to 1080 while my monitor isn't supporting it?
 

A:No video signal after installing GPU software/drivers

I've read that there are times when the driver can't properly read the EDID data from the TV, and causes display problem. Can you boot into safe mode, change the display setting to 1440x900, then reboot into normal mode? Looks like your nVidia card has both HDMI & DVI connection, maybe try changing connection from one type to the other?

The driver I found on nVidia's site is version 285.62. Is that what you have?
 

http://www.techspot.com/community/topics/no-video-signal-after-installing-gpu-software-drivers.173192/
Relevancy 16.77%

Fixed the problem, I forgot to plug in the power supply connectors to the video card (do all cards require this these days?). Everythings working well except the text appears a little fuzzy...
 

A:Driver won't install, video card may be disabled

haha yes they are a fair bit more powerful then AGP cards
 

http://www.techspot.com/community/topics/driver-wont-install-video-card-may-be-disabled.176356/
Relevancy 14.62%

hiyall

do i physicaly instal front panel card reader and a usb 2 x4 pci card before 1st boot of bios and before new install of win 7 64 , or after ?
please and thanks
 

A:Install front panel card reader and a USB 2x4 PCI card before first boot?

Before. Did you get a driver(s) CD with the card reader?
 

http://www.techspot.com/community/topics/install-front-panel-card-reader-and-a-usb-2x4-pci-card-before-first-boot.175140/
Relevancy 20.21%

Hi all I have a bit of a problem wondering if someone could help, I am running windows7 64 bit It's just coming up to a year old, I had this same problem when i uninstalled Norton but I called someone and they help me remove the key that was stopping the dvd rom from working, I Now am having the same problem scince I uninstalled avg and reinstalled it. I would do what I was told to before but I cannot remember what i have to do again :/ I know it is in regedit some where but not sure on where to go after, Any help or advice would be great thank you. It will play cds but not dvds :/
thanx in advance
 

A:DVD will not read DVDs or DVD software but will play CDs

Do you have a Windows Vista or 7 install disk? Or even a restore disk if its a branded PC. All of those should be DVDs, so see if you can boot the computer from that disk (you won't actually go through any of the install process, just see if it boots from the disk). This will ensure that your dvd laser didn't die. The laser for cd and dvd reading are different, so it is possible that one could die while the other is still good.

You may be exactly right with it being a registry thing, but if you have a bootable disk that is a dvd we can easily rule out a hardware issue.
 

http://www.techspot.com/community/topics/dvd-will-not-read-dvds-or-dvd-software-but-will-play-cds.174835/
Relevancy 16.77%

Hello I recently added a rd hard drive to my computer so I could put my two existing HDs in RAID and still have a back up drive I cloned my main drive to my new backup drive and did a fresh Windows -bit install on the new RAID array I ve been able to get all my hardware working except for my X-FI 0 sound RAID on fresh No after from install Win7-64 CreativeLabs ExtremeMusic SB soundcard I ve gotten it to work a few brief times but I can t figure out what driver and control panel versions I used to make it work before I just remember it being a long process of searching online before I found an answer that worked for me Is there anyway to find out what versions I have on my backup HD since it has the correct driver and control panel versions on it Here s a description of my actual soundcard problem When I try play something in media player there is no sound the progress bar doesn t move if I watch a youtube video the progress bar moves but I still get no sound and I have no system sound either My on-board audio when enabled works perfectly My on-board audio is disabled in No sound from X-FI after fresh Win7-64 install on RAID 0 the bios the X-FI shows up in device manager and appears to be installed correctly with the latest drivers for win - I get clicks from my speakers when installing the drivers and I have tried completely uninstalling the card and re-installing it as an admin but I still don t get any sound Any and all help is greatly appreciated nbsp

http://www.techspot.com/community/topics/no-sound-from-x-fi-after-fresh-win7-64-install-on-raid-0.174259/
Relevancy 21.5%
Relevancy 20.64%

Hello all, just set up a server running server 2003 and exchange 2003. Configured dns and mx records. I could send and recieve e-mails internally within the network, but when trying to send from my gmail account I get an error. Any help greatly appreciated. Thanks.
 

A:Exchange Server 2003 sending e-mail externally problem

I know this is an old post, but are you still having problems with mail. Also, are you having problems sending mail to an external email account or receiving mail from an external account?
 

http://www.techspot.com/community/topics/exchange-server-2003-sending-e-mail-externally-problem.172488/
Relevancy 16.34%

I have four OCZ Agility SSD s and want to install them on my new desktop build I also have one Adaptec SGL Raid Card with two connections and will handle up to drives I need help in figuring out the best most efficient way to get these SSD s on my Desktop I ve seen several to enclosures with built in raid switches on the back but the reviews haven t been that enticing First off do I even need the Raid Adaptec adapter Secondly what is the best way to incorporate the ssd s on my AMD FX Desktop Also so I mirror all drives at Raid or use as storage Or include one TB WD HDD for my storage drive Would like to hear the most efficient ways to install my SSD s and possibly include one HDD and what raid settings would be best for each set desktop to RAID 3 way on W7 four 60GB enclosure? install with Agility OCZ Best up ssd s in inch enclosures only or SSD s in two enclosures and the TB HDD as my storage drive What is the best to ssd enclosures to Best way to install four 60GB OCZ Agility 3 on W7 desktop with RAID enclosure? use and are the ones with the raid switch on the back of the enclosures of any benefit Thanks in advance George nbsp

A:Best way to install four 60GB OCZ Agility 3 on W7 desktop with RAID enclosure?

Also I could do two ssd's in one 3.5 enclosure with hdd

I forgot to mension If easier I can also go with only two 60GB SSD's and mirror them in Raid 0 and install one 2TB HDD as my storage drive.
I just need to know the most simple and efficient way to go with all these drives and which Raid to use with each.
Obviously, this is my first build wanting to try SSD's and also my first encounter using Raid! I'm freaking lost and need some experience to guide me through this delima.
The balance of my system is a nine hundred Antec case, Sabertooth 990fx mobo, w1090T AMD processor and I'm also still looking for a aftermarket good cpu cooler for the AMD Black processor.

Thanks
George
 

http://www.techspot.com/community/topics/best-way-to-install-four-60gb-ocz-agility-3-on-w7-desktop-with-raid-enclosure.173653/
Relevancy 17.63%

As of now, I am running on a low spec laptop. My Inspiron 1545, it currently has 2.20GHz 2.19 GHz and 3.00GB installed on it. It has an integrated graphics card and video card. The only game I'm planning to run on it is TF2. I currently get about 10 - 15 fps on a normal game of 12 people. I have an fps script that makes the game look like nintendo 64 graphics and have tweaked some of the models. I know that I can't install / upgrade my graphics or video card, so I was planning to get more RAM to increase the speed of gaming.

My question is, can I install more RAM into my laptop? If so, then where do I buy it and how do I install it?
 

A:Install more RAM?

mm yes you can install more ram, its pretty easy, takes a screw driver and taking out two screws

looks like it can handle up to 8 gigs of ram, ddr2 800 sdram.

Make sure you have a 64 bit os to utilize more than 3gigs of ram.
 

http://www.techspot.com/community/topics/install-more-ram.173388/
Relevancy 21.07%

I attempted to promote a member server to be a BDC in a single server domain It seemed to complete successfully but later I found that it did not I now have multiple issues with the server I see the following in Event Viewer In the system log I am receiving SAM errors In the Directory Service log I am receiving NTDS Replication errors that full synchronization did not occur In the DNS Server log I am receiving Event id stating that the DNS BDC Issues a a had server failed 2000 DCPromo that with server is unable to open the Active Directory In File Replication I am receiving a error Apparently the SYSVOL cannot be created I do see that the user database did come over from the PDC however I am also receiving messages that I cannot create new Issues with a 2000 server BDC that had a failed DCPromo user objects until the BDC can sync with the PDC I am researching all this stuff but not really knowing where to begin I have tried to DEMOTE the failing BDC but since it cannot attach to the Issues with a 2000 server BDC that had a failed DCPromo DNS server the ip address of the PDC the demotion fails too Any thoughts are GREATLY appreciated Greg nbsp

A:Issues with a 2000 server BDC that had a failed DCPromo

Maybe this will help:
http://support.microsoft.com/kb/837932
 

http://www.techspot.com/community/topics/issues-with-a-2000-server-bdc-that-had-a-failed-dcpromo.172227/