Windows Support Forum

ntoskrnl.exe causing BSOD Windows 7

Q: ntoskrnl.exe causing BSOD Windows 7

Hi, i was given a laptop by a friend about a week ago, its a DELL Vostro 1500.
i was told that it "crashed" randomly, when i had it it had vista.

the sticker on the laptop says "core 2 duo" but the actual processor was a celeron!

so, my first port of call was throwing a core 2 duo in, this worked well for about a day until it bsoded again. (The processor i put in was a core 2 duo that came with the original vostro.)

I then put a new HDD in and installed windows 7 pro but the bsods are still here.

I have attached the minidumps that have ocurred during the past day or so.

They all point to ntoskrnl.exe but i am not sure where to go from here.

Thanks, Elis
Attachment 87418

Relevancy 100%
Preferred Solution: ntoskrnl.exe causing BSOD Windows 7

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: ntoskrnl.exe causing BSOD Windows 7

Hi Ellis and welcome to the forum. There are no mini dumps attached. How to upload your dump files - http://www.sevenforums.com/tutorials...en-forums.html

http://www.sevenforums.com/bsod-help-support/99775-ntoskrnl-exe-causing-bsod-windows-7-a.html
Relevancy 77.83%

Note: I was unable to get a log with perfmon /report because it would run endlessly.
 
 
 
The crash seems to just happen randomly as far as I can tell.
 
· OS - Windows 10
· x64
· Original OS installed - Windows 10
· The OS is OEM
· Computer is no older than one year
· OS was installed after building the computer and has never been re-installed
 
 
 
· Intel I5 4460· Nvidia GTX 1070· ASRock H97M PRO4· EVGA SuperNOVA 750 B2, 80+ BRONZE 750W
· Desktop
 
 
 
 

http://www.bleepingcomputer.com/forums/t/627762/ntoskrnlexe-causing-windows-to-get-bsod/
Relevancy 69.23%

I keep getting a BSOD I get a message that pops up when the computer restarts that says Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the BSOD causing ntoskrnl.exe problem BCCode BCP BCP A F BCP BCP OS Version Service Pack Product Files that help describe the problem C Windows Minidump - - dmp C Users Martin AppData Local Temp WER- - sysdata xml Read our privacy statement online Windows Privacy Highlights - Microsoft Windows If the online privacy statement is not available please read our privacy statement offline ntoskrnl.exe causing BSOD C Windows system en-US erofflps txt -------------------------------------------------------------------------------- I ran a scan with Blue Screen View and got this Dump File - - dmp Crash Time PM Bug Check String Bug Check Code x Parameter x Parameter x a f Parameter x Parameter x Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe f File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win rtm - Processor -bit Computer Name Full Path C Windows minidump - - dmp Dump File - - dmp Crash Time PM Bug Check String Bug Check Code x Parameter x Parameter x Parameter x Parameter x Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe f File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win rtm - Processor -bit Computer Name Full Path C Windows minidump - - dmp Dump File - - dmp Crash Time PM Bug Check String Bug Check Code x Parameter x Parameter x d Parameter x Parameter x Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe f File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win rtm - Processor -bit Computer Name Full Path C Windows minidump - - dmp Dump File - - dmp Crash Time PM Bug Check String Bug Check Code x Parameter x Parameter x f dc Parameter x Parameter x Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe f File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win rtm - Processor -bit Computer Name Full Path C Windows minidump - - dmp Dump File - - dmp Crash Time AM Bug Check String Bug Check Code x Parameter x Parameter x a Parameter x Parameter x Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe f File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win rtm - Processor -bit Computer Name Full Path C Windows minidump - - dmp Dump File - - dmp Crash Time PM Bug Check String Bug Check Code x Parameter x Parameter x dc Parameter x Parameter x Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe f File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win rtm - Processor -bit Computer Name Full Path C Windows minidump - - dmp Dump File - - dmp Crash Time AM Bug Check String Bug Check Code x Parameter x Parameter x d fc Parameter x Parameter x Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe f File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win rtm - Processor -bit Computer Name Full Path C Windows minidump - - dmp Dump File - - dmp Crash Time PM Bug Check String Bug Check Code x Parameter x Parameter x b Parameter x Parameter x Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe f File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win rtm - Processor -bit Computer Name Full Path C Windows minidump - - dmp Dump File - - dmp Crash Time PM Bug Check String Bug Check Code x Parameter x Parameter x d Parameter x Parameter x Caused By Driver ntoskrnl exe Caused By Ad... Read more

A:ntoskrnl.exe causing BSOD

  
Quote: Originally Posted by Firestar


I keep getting a BSOD. I get a message that pops up when the computer restarts that says:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: 124
BCP1: 00000000
BCP2: 8572A6F4
BCP3: 00000000
BCP4: 00000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\121209-63062-01.dmp
C:\Users\Martin\AppData\Local\Temp\WER-83265-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Highlights - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

--------------------------------------------------------------------------------
I ran a scan with Blue Screen View and got this.

==================================================
Dump File : 121209-63062-01.dmp
Crash Time : 12/12/2009 6:51:59 PM
Bug Check String :
Bug Check Code : 0x00000124
Parameter 1 : 0x00000000
Parameter 2 : 0x8572a6f4
Parameter 3 : 0x00000000
Parameter 4 : 0x00000000
Caused By Driver : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+316f63
File Description : NT Kernel & System
Product Name : Microsoft? Windows? Operating System
Company : Microsoft Corporation
File Version : 6.1.7600.16385 (win7_rtm.090713-1255)
Processor : 32-bit
Computer Name :
Full Path : C:\Windows\minidump\121209-63062-01.dmp
==================================================

==================================================
Dump File : 120809-42843-01.dmp
Crash Time : 12/8/2009 12:50:17 PM
Bug Check String :
Bug Check Code : 0x00000124
Parameter 1 : 0x00000000
Parameter 2 : 0x85736604
Parameter 3 : 0x00000000
Parameter 4 : 0x00000000
Caused By Driver : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+316f63
File Description : NT Kernel & System
Product Name : Microsoft? Windows? Operating System
Company : Microsoft Corporation
File Version : 6.1.7600.16385 (win7_rtm.090713-1255)
Processor : 32-bit
Computer Name :
Full Path : C:\Windows\minidump\120809-42843-01.dmp
==================================================

==================================================
Dump File : 120409-54046-01.dmp
Crash Time : 12/4/2009 12:16:46 PM
Bug Check String :
Bug Check Code : 0x00000124
Parameter 1 : 0x00000000
Parameter 2 : 0x856d3024
Parameter 3 : 0x00000000
Parameter 4 : 0x00000000
Caused By Driver : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+316f63
File Description : NT Kernel & System
Product Name : Microsoft? Windows? Operating System
Company : Microsoft Corporation
File Version : 6.1.7600.16385 (win7_rtm.090713-1255)
Processor : 32-bit
Computer Name :
Full Path : C:\Windows\minidump\120409-54046-01.dmp
==================================================

==================================================
Dump File : 120409-59203-01.dmp
Crash Time : 12/4/2009 12:13:40 PM
Bug Check String :
Bug Check Code : 0x00000124
Parameter 1 : 0x00000000
Parameter 2 : 0x8575f4dc
Parameter 3 : 0x00000000
Parameter 4 : 0x00000000
Caused By Driver : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+316f63
File Description : NT Kernel & System
Product Name : Microsoft? Windows? Operating System
Company : Microsoft Corporation
File Version : 6.1.7600.16385 (win7_rtm.090713-1255)
Processor : 32-bit
Computer Name :
Full Path : C:\Windows\minidump\120409-59203-01.dmp
==================================================

================================================... Read more

http://www.sevenforums.com/bsod-help-support/46451-ntoskrnl-exe-causing-bsod.html
Relevancy 69.23%

Hi,
I've had 2 bsods and one of them was irql_not_less_or_equal and the second was system service exception. They have this common thing which is ntoskrnl.exe and i dont know what do to solve the problem i hope you can help.
You can see all the info in the rar included.

A:ntoskrnl.exe causing BSOD

Analysis:Crashes indicate an issue with your Intel storage drivers.Go to Intel? Driver Update Utility,
run the utility,
click on the link for Chipset Family,
Scroll down and select Standard Version or Intel Rapid Storage Technology (not the Enterprise version).
There is a page that loads with information on other Intel drivers for your system including Intel storage drivers. You may have to let it load for 10-15 seconds before it displays your particular drivers link.
Go to that link, download the drivers, and install them.

3rd Party Drivers:The following are for informational purposes only:
Code:
regi.sys Mon Apr 16 09:19:10 2007 (462393EE)
GEARAspiWDM.sys Mon May 18 06:17:04 2009 (4A1151C0)
ArcSoftKsUFilter.sys Mon May 25 02:27:31 2009 (4A1A5673)
intelppm.sys Mon Jul 13 17:19:25 2009 (4A5BC0FD)
PxHlpa64.sys Tue Oct 20 12:08:42 2009 (4ADDFCAA)
SFEP.sys Thu Nov 26 22:39:13 2009 (4B0F6601)
aswNdis.sys Sat Jan 9 14:22:03 2010 (4B48F37B)
amdxata.sys Fri Mar 19 10:18:18 2010 (4BA3A3CA)
MOBK649.sys Wed Apr 7 16:06:36 2010 (4BBD01EC)
HECIx64.sys Tue Oct 19 17:33:43 2010 (4CBE2AD7)
rimssne64.sys Wed Oct 20 19:33:06 2010 (4CBF9852)
nusb3xhc.sys Thu Dec 9 21:50:35 2010 (4D01B19B)
nusb3hub.sys Thu Dec 9 21:50:35 2010 (4D01B19B)
risdsnxc64.sys Fri Dec 17 05:45:48 2010 (4D0B5B7C)
SynTP.sys Fri Dec 17 09:51:13 2010 (4D0B9501)
iaStor.sys Wed Jan 12 18:50:12 2011 (4D2E5A54)
nvhda64v.sys Thu Mar 3 08:59:02 2011 (4D6FBAC6)
Rt64win7.sys Thu Apr 21 12:15:33 2011 (4DB07445)
btath_bus.sys Fri May 27 06:02:47 2011 (4DDF92E7)
nvBridge.kmd Thu Jun 16 20:57:30 2011 (4DFAC29A)
nvlddmkm.sys Thu Jun 16 21:08:19 2011 (4DFAC523)
athrx.sys Tue Jun 21 02:03:39 2011 (4E00505B)
RTKVHD64.sys Fri Jun 24 04:44:10 2011 (4E046A7A)
dtsoftbus01.sys Fri Jan 13 06:45:46 2012 (4F10358A)
aswFsBlk.SYS Tue Mar 6 17:01:31 2012 (4F56A55B)
aswMonFlt.sys Tue Mar 6 17:01:51 2012 (4F56A56F)
aswTdi.SYS Tue Mar 6 17:01:56 2012 (4F56A574)
aswrdr2.sys Tue Mar 6 17:02:19 2012 (4F56A58B)
aswKbd.SYS Tue Mar 6 17:02:44 2012 (4F56A5A4)
aswNdis2.sys Tue Mar 6 17:03:28 2012 (4F56A5D0)
aswSP.SYS Tue Mar 6 17:04:03 2012 (4F56A5F3)
aswSnx.SYS Tue Mar 6 17:04:05 2012 (4F56A5F5)
aswFW.SYS Tue Mar 6 17:04:29 2012 (4F56A60D)
regi.sys
GEARAspiWDM.sys
ArcSoftKsUFilter.sys
intelppm.sys
PxHlpa64.sys
SFEP.sys
aswNdis.sys
amdxata.sys
MOBK649.sys - Mozy Change Monitor Filter Driver
HECIx64.sys
rimssne64.sys
nusb3xhc.sys
nusb3hub.sys
risdsnxc64.sys - Ricoh Memory Controller
SynTP.sys
iaStor.sys
nvhda64v.sys
Rt64win7.sys
btath_bus.sys
nvBridge.kmd
nvlddmkm.sys
athrx.sys
RTKVHD64.sys
dtsoftbus01.sys
aswFsBlk.SYS
aswMonFlt.sys
aswTdi.SYS
aswrdr2.sys
aswKbd.SYS
aswNdis2.sys
aswSP.SYS
aswSnx.SYS
aswFW.SYS

http://www.sevenforums.com/bsod-help-support/240830-ntoskrnl-exe-causing-bsod.html
Relevancy 69.23%

Hi,

I've had this pc for about 4 months and it has suddenly started crashing, the first two were prior to a system restore so I don't have the dump files, however the subsequent two I do and they're attached as the results of the SF_diagnostic_tool report.

Not sure what other information is needed?

Thanks.

Edit:
So after posting this the computer crashed a further perhaps 10 times. I've removed all peripherals (speakers, mouse, keyboard) to check that this had nothing to do with it and the crashes persisted. The most recent crash occurred while I was attempting to reinstall Windows by booting from CD. Something I haven't done due to this crash. Attached is the more recent set of reports from SF_diagnostic_tool (Underscore2). I'm beginning to think this may be a hardware issue (the pc was a custom build).

A:ntoskrnl.exe causing BSOD

I can't tell exactly what's happening inside the NVidia driver at the time of the crash, but I can make a guess it's probably trying to retrieve internal values and is crashing within itself (and thus causing the bugcheck):

Code:
3: kd> .bugcheck
Bugcheck code 00000050
Arguments fffff880`0c83edc0 00000000`00000001 fffff880`04185f20 00000000`00000002

3: kd> !thread
GetPointerFromAddress: unable to read from fffff801e01dc000
THREAD fffffa80072d8080 Cid 0d60.06e4 Teb: 000000007f3a5000 Win32Thread: fffff9010260eb90 RUNNING on processor 3
Not impersonating
GetUlongFromAddress: unable to read from fffff801e00fbcf0
Owning Process fffffa80088df940 Image: chrome.exe
Attached Process N/A Image: N/A
fffff78000000000: Unable to get shared data
Wait Start TickCount 83473
Context Switch Count 5107 IdealProcessor: 3
ReadMemory error: Cannot get nt!KeMaximumIncrement value.
UserTime 00:00:00.000
KernelTime 00:00:00.000
Win32 Start Address 0x00000000624a7588
Stack Init fffff8800c5a0c90 Current fffff8800c5a06a0
Base fffff8800c5a1000 Limit fffff8800c59b000 Call 0
Priority 11 BasePriority 8 UnusualBoost 0 ForegroundBoost 2 IoPriority 2 PagePriority 5
Child-SP RetAddr : Args to Child : Call Site
fffff880`0c59e9c8 fffff801`dff9f57c : 00000000`00000050 fffff880`0c83edc0 00000000`00000001 fffff880`0c59ebb0 : nt!KeBugCheckEx
fffff880`0c59e9d0 fffff801`dff188eb : 00000000`00000001 fffff880`0c83edc0 fffffa80`072d8080 fffff880`0426c0d7 : nt! ?? ::FNODOBFM::`string'+0x33ec8
fffff880`0c59ea70 fffff801`dfedbcee : 00000000`00000001 fffffa80`09d5fa20 00000000`00000000 fffff880`0c59ebb0 : nt!MmAccessFault+0x55b
fffff880`0c59ebb0 fffff880`04185f20 : fffffa80`09d5fa00 fffffa80`09d5fa00 00000000`00000000 fffffa80`06c27010 : nt!KiPageFault+0x16e (TrapFrame @ fffff880`0c59ebb0)
fffff880`0c59ed40 fffffa80`09d5fa00 : fffffa80`09d5fa00 00000000`00000000 fffffa80`06c27010 fffff880`0c59f1a0 : nvlddmkm+0xcef20
fffff880`0c59ed48 fffffa80`09d5fa00 : 00000000`00000000 fffffa80`06c27010 fffff880`0c59f1a0 fffff880`0c59f194 : 0xfffffa80`09d5fa00
fffff880`0c59ed50 00000000`00000000 : fffffa80`06c27010 fffff880`0c59f1a0 fffff880`0c59f194 fffff8a0`01d1f2b0 : 0xfffffa80`09d5fa00

3: kd> .trap fffff880`0c59ebb0
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000000 rbx=0000000000000000 rcx=fffffa8007672010
rdx=0000000000000001 rsi=0000000000000000 rdi=0000000000000000
rip=fffff88004185f20 rsp=fffff8800c59ed40 rbp=fffff8800c59f260
r8=0000000000000001 r9=fffffa80099cd4d0 r10=0000000000000001
r11=fffffa8006967018 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei pl nz na pe nc
nvlddmkm+0xcef20:
fffff880`04185f20 88942480000000 mov byte ptr [rsp+80h],dl ss:0018:fffff880`0c59edc0=00

3: kd> kn
*** Stack trace for last set context - .thread/.cxr resets it
# Child-SP RetAddr Call Site
00 fffff880`0c59ed40 fffffa80`09d5fa00 nvlddmkm+0xcef20
01 fffff880`0c59ed48 fffffa80`09d5fa00 0xfffffa80`09d5fa00
02 fffff880`0c59ed50 00000000`00000000 0xfffffa80`09d5fa00

3: kd> u nvlddmkm+0xcef20
nvlddmkm+0xcef20:
fffff880`04185f20 88942480000000 mov byte ptr [rsp+80h],dl
fffff880`04185f27 4d85e4 test r12,r12
fffff880`04185f2a 7420 je nvlddmkm+0xcef4c (fffff880`04185f4c)
fffff880`04185f2c 84d2 test dl,dl
fffff880`04185f2e 0f8416020000 je nvlddmkm+0xcf14a (fffff880`0418614a)
fffff880`04185f34 41f74534ffff0100 test dword ptr [r13+34h],1FFFFh
fffff880`04185f3c 750e jne nvlddmkm+0xcef4c (fffff880`04185f4c)
fffff880`04185f3e 41f745340000feff test dword ptr [r13+34h],0FFFE0000h
3: kd> ub nvlddmkm+0xcef20
nvlddmkm+0xceefa:
fffff880`04185efa 488b8c2460040000 m... Read more

http://www.eightforums.com/bsod-crashes-debugging/24857-ntoskrnl-exe-causing-bsod.html
Relevancy 69.23%

Hi need a little help with my PC I built a few years ago Recently upgraded to Windows bit but was also receiving BSOD in Windows I ve ran memtest successfully overnight causing ntoskrnl.exe BSOD and ran numerous chkdsk system repair tests which found no ntoskrnl.exe causing BSOD errors PC has froze a few times as well just watching Youtube vids with my video card removed as a test I ve attached two dmp files if anyone could help me diagnose Thanks in advance Here are a few specs ntoskrnl.exe causing BSOD from my PC - ASUS M A T-E AM AMD GX HDMI ATX AMD Motherboard - ASUS EN GS Silent P M GeForce GS MB -bit DDR PCI Express x HDCP Ready Video Card - ntoskrnl.exe causing BSOD AMD Phenom II X Black Edition Deneb GHz Socket AM W Quad-Core Processor HDZ FBGMBOX - G SKILL Ripjaws Series GB x GB -Pin DDR SDRAM DDR PC Desktop Memory Model F - CL D- - Western Digital WD Blue WD AAKS GB RPM SATA Gb s quot Internal Hard Drive -Bare Drive

A:ntoskrnl.exe causing BSOD

Hello gbleezy,I've had a look at the two dump files but they weren't very enlightening, at least to my eyes. STOP 0x00000139: KERNEL_SECURITY_CHECK_FAILUREBecause this deals with system security, it would be worth double checking the system for malware: Eset Online Scanner Malwarebytes Anti-malware FreeUncheck the offer for trial Pro version).[/list]Old Driver:ASACPI.sys Sun Mar 27 22:30:36 2005 (42476C4C)Asus ATK0110 ACPI Utility (a known BSOD maker in Win7). Also a part of the Asus PCProbe and AISuite Utilitieshttp://www.carrona.org/drivers/driver.php?id=ASACPI.sysIf you have either Asus PCProbe and AISuite Utilities installed, please uninstall them, at least until the system is stable.Network Drivers:Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller (NDIS6.20) Realtek RTL8192SU Wireless LAN 802.11n USB 2.0 Network Adapter Driver Windows 7 had many issues with USB network devices. Not sure about Windows 8 yet. If you are using the USB wireless but have the option to hard wire into the Atheros, you could try it as a test. I would uninstall the Realtek USB temporarily. Realtek RTL8192SU Wireless LAN 802.11n USB 2.0 Network Adapter Drivershttp://www.carrona.org/drivers/driver.php?id=RTL8192su.sysBSOD Bug Check Code: For informational purposes only.
Spoiler
Debug session time: Mon Dec 31 00:24:11.818 2012 (UTC - 5:00)Loading Dump File [D:\Download_D\BleepingComputer_BSOD\gbleezy\123012-16208-01.dmp]Built by: 9200.16461.amd64fre.win8_gdr.121119-1606System Uptime: 1 days 9:40:39.503Probably caused by : ntkrnlmp.exe ( nt!KiFastFailDispatch+d0 )BugCheck 139, {3, fffff8800e0d1890, fffff8800e0d17e8, 0}BugCheck Info: Unknown bugcheck code (139)Bugcheck code 00000139Arguments:Arg1: 0000000000000003Arg2: fffff8800e0d1890Arg3: fffff8800e0d17e8Arg4: 0000000000000000BUGCHECK_STR: 0x139DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULTPROCESS_NAME: chrome.exeFAILURE_BUCKET_ID: X64_0x139_nt!KiFastFailDispatch+d0BiosVersion = 3503BiosReleaseDate = 04/13/2011SystemManufacturer = System manufacturerSystemProductName = System Product Name??????????????????????????????????????????????????????????????????????????????????????``Debug session time: Fri Dec 28 13:24:36.600 2012 (UTC - 5:00)Loading Dump File [D:\Download_D\BleepingComputer_BSOD\gbleezy\122812-23712-01.dmp]Built by: 9200.16461.amd64fre.win8_gdr.121119-1606System Uptime: 0 days 12:46:08.824Probably caused by : Pool_Corruption ( nt!ExFreePool+3ec )BugCheck 19, {3, fffffa8008591630, fffffa8008591430, fffffa8008591630}BugCheck Info: BAD_POOL_HEADER (19)Bugcheck code 00000019Arguments:Arg1: 0000000000000003, the pool freelist is corrupt.Arg2: fffffa8008591630, the pool entry being checked.Arg3: fffffa8008591430, the read back flink freelist value (should be the same as 2).Arg4: fffffa8008591630, the read back blink freelist value (should be the same as 2).BUGCHECK_STR: 0x19_3PROCESS_NAME: MsMpEng.exeFAILURE_BUCKET_ID: X64_0x19_3_nt!ExFreePool+3ecBiosVersion = 3503BiosReleaseDate = 04/13/2011SystemManufacturer = System manufacturerSystemProductName = System Product Name

http://www.bleepingcomputer.com/forums/t/480217/ntoskrnlexe-causing-bsod/
Relevancy 69.23%

i'm getting a lot of BSOD causing by ntoskrnl exe i think it's not a hardware causing BSOD ntoskrnl.exe lot a of problem because when i use ubuntu i dont get any hardware problem causing system to restart or hang here is all my BSOD details with minidumps hope someone help me Code Dump File - - dmp Crash Time ntoskrnl.exe causing a lot of BSOD PM Bug Check String SYSTEM SERVICE EXCEPTION Bug Check ntoskrnl.exe causing a lot of BSOD Code x b Parameter c Parameter fffff c c Parameter fffff f dd Parameter Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe f File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win rtm - Processor x Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time PM Bug Check String IRQL NOT LESS OR EQUAL Bug Check Code x a Parameter Parameter Parameter Parameter fffff dda Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe f File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win rtm - Processor x Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time PM Bug Check String IRQL NOT LESS OR EQUAL Bug Check Code x a Parameter Parameter Parameter Parameter fffff b Caused By Driver Caused By Address File Description Product Name Company File Version Processor x Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time PM Bug Check String IRQL NOT LESS OR EQUAL Bug Check Code x a Parameter e Parameter Parameter Parameter fffff a a Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe f File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win rtm - Processor x Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time PM Bug Check String IRQL NOT LESS OR EQUAL Bug Check Code x a Parameter Parameter Parameter Parameter fffff Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe f File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win rtm - Processor x Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time PM Bug Check String IRQL NOT LESS OR EQUAL Bug Check Code x a Parameter Parameter Parameter Parameter fffff ae Caused By Driver Caused By Address File Description Product Name Company File Version Processor x Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time PM Bug Check String IRQL NOT LESS OR EQUAL Bug Check Code x a Parameter Parameter Parameter Parameter fffff dfa Caused By Driver Caused By Address File Description Product Name Company File Version Processor x Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time PM Bug Check String IRQL NOT LESS OR EQUAL Bug Check Code x a Parameter Parameter Parameter Parameter fffff e Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe f File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win rtm - Processor x Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time PM Bug Check String KMODE EXCEPTION NOT HANDLED Bug Check Code x e Parameter Parameter Parameter Parameter Caused By Driver ataport SYS Caused By Address ataport SYS File Description Product Name Company File Version Processor x Co... Read more

A:ntoskrnl.exe causing a lot of BSOD

Hello,

I'm seeing some serious OS corruption going on, often indicative of hardware trouble. Would you mind running through these tests?

RAM - Test with Memtest86+

Run all three Prime96 tests: RAM - Test with Memtest86+

If the tests show nothing, please provide: http://www.sevenforums.com/crashes-d...tructions.html

...Summary of the dumps:

Code:

Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Fri Apr 22 07:05:02.124 2011 (UTC - 4:00)
System Uptime: 0 days 0:32:13.153
Probably caused by : ntkrnlmp.exe ( nt!KiSystemServiceHandler+7c )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x3B
PROCESS_NAME: dllhost.exe
FAILURE_BUCKET_ID: X64_0x3B_nt!KiSystemServiceHandler+7c
SystemProductName = HP Pavilion dv6500 Notebook PC
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Fri Apr 22 06:25:52.692 2011 (UTC - 4:00)
System Uptime: 0 days 0:00:57.845
Probably caused by : Pool_Corruption ( nt!ExDeferredFreePool+174 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0xA
PROCESS_NAME: rundll32.exe
FAILURE_BUCKET_ID: X64_0xA_nt!ExDeferredFreePool+174
SystemProductName = HP Pavilion dv6500 Notebook PC
??????????????????????????????????????????????????????????????????????????????????????``
*** WARNING: Unable to verify timestamp for Unknown_Module_753d6b1b`28ab31a4
*** ERROR: Module load completed but symbols could not be loaded for Unknown_Module_753d6b1b`28ab31a4
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Fri Apr 22 06:16:54.195 2011 (UTC - 4:00)
System Uptime: 0 days 0:00:54.349
*** WARNING: Unable to verify timestamp for Unknown_Module_753d6b1b`28ab31a4
*** ERROR: Module load completed but symbols could not be loaded for Unknown_Module_753d6b1b`28ab31a4
Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0xA
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Thu Apr 21 14:45:39.744 2011 (UTC - 4:00)
System Uptime: 0 days 0:44:09.898
Probably caused by : win32k.sys ( win32k!HmgDecProcessHandleCount+2c )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0xA
PROCESS_NAME: taskhost.exe
FAILURE_BUCKET_ID: X64_0xA_win32k!HmgDecProcessHandleCount+2c
SystemProductName = HP Pavilion dv6500 Notebook PC
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Thu Apr 21 13:57:55.750 2011 (UTC - 4:00)
System Uptime: 0 days 0:00:47.903
Probably caused by : ataport.SYS ( ataport!IdeCompleteScsiIrp+62 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0xA
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0xA_ataport!IdeCompleteScsiIrp+62
SystemProductName = HP Pavilion dv6500 Notebook PC
??????????????????????????????????????????????????????????????????????????????????????``
*** WARNING: Unable to verify timestamp for Unknown_Module_00206b6e`ffffff70
*** ERROR: Module load completed but symbols could not be loaded for Unknown_Module_00206b6e`ffffff70
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Thu Apr 21 13:56:23.726 2011 (UTC - 4:00)
System Uptime: 0 days 0:00:48.879
*** WARNING: Unable to verify timestamp for Unknown_Module_00206b6e`ffffff70
*** ERROR: Module load completed but symbols could not be loaded for Unknown_Module_00206b6e`ffffff70
Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0xA
??????????????????????????????????????????????????????????????????????????????????????``
*** WARNING: Unable to verify timestamp for Unknown_Module_02fd48d8`00000058
*** ERROR: Module load completed but symbols could not be loaded for Unknown_Module_02fd48d8`00000058
Built by: 7600.16385.amd64f... Read more

http://www.sevenforums.com/bsod-help-support/158624-ntoskrnl-exe-causing-lot-bsod.html
Relevancy 69.23%

i've checked my minidump files and all my BSODs point to ntoskrnl.exe because it couldnt load image or something.... and typing ... expand e:\i386\ntoskrnl.ex_ c:\windows\system32 ...does not work for me (in recovery console from windows cd) ... (e:\ because i have 2 partitions and cd rom is e drive)


plz can anyone give any advice on how to fix this problem
 

A:ntoskrnl.exe causing BSOD

Start by:

Checking hard drive for errors...

then check Memory using Memtest86

then check for Viruses, spyware/malware

Then run CCleaner to clean up files

Let us know what you find
 

http://www.techspot.com/community/topics/ntoskrnl-exe-causing-bsod.80507/
Relevancy 69.23%

It happen 3 to 5 minutes after turn on. Please help.

A:BSOD causing by Ntoskrnl.exe

I'm having the exact same problem. I am going to create a thread too with some crash dumps and hopefully someone can help me out

http://www.sevenforums.com/bsod-help-support/375692-bsod-causing-ntoskrnl-exe.html
Relevancy 68.37%

Hello everyone My computer seems to causing BSOD multiple ntoskrnl.exe be randomly crashing most of the time while I'm gaming or trying to use my Oculus Rift Sometimes it will crash almost immediately other times it will be hours or sometimes not at all I've tried somewhat troubleshooting the issue but I now ntoskrnl.exe causing multiple BSOD need your help to actually fix it I'm running Windows Pro ntoskrnl.exe causing multiple BSOD here's a little list of what I've already tried Done all Windows UpdatesUnistalled AvastRan Memtest for about passes i'm going to do a full tonight Tried using driver verifier but my system wouldn't even boot why I think its some random ntoskrnl.exe causing multiple BSOD driver issue Ran chkdisk on my ssdI've stress tested and monitored my gpu so its not overheating I built this desktop a little over a year ago and its really always had these random crashes Just recently started playing a bunch of Overwatch Beta and using my new Oculus Rift which is why now I really want to fix it Anyways let me know what else I can do or should try Thanks for any help Attached is the zip with the info

http://www.tenforums.com/bsod-crashes-debugging/49347-ntoskrnl-exe-causing-multiple-bsod.html
Relevancy 68.37%

Note Please disregard what it says under quot My System Specs quot for this post This post is about a different computer I bought a Toshiba Satellite C D-S laptop a couple of weeks ago It came with Windows -bit pre-installed Every now and then the laptop gets a Blue Screen of Death with a quot system service exception quot error message The BSOD doesn't appear during just one specific event It has appeared at different times while doing different things surfing the web running Windows Explorer etc I've run Blue Screen View on the minidump file that was produced by this error and it points to the ntoskrnl exe driver as the cause of the crash I've attached the output from Blue Screen View as a jpg file titled quot BlueScreenViewOutput quot The original minidump file which is in the quot SF - - zip quot zip folder is also attached in case anyone wants to run it through their ntoskrnl.exe causing system_service_exception BSOD own debugger Other than Windows updates there isn't any software installed on the computer other than what was pre-installed by Toshiba I have ntoskrnl.exe causing system_service_exception BSOD however removed all of the Norton and WildTangent software that came with the laptop I've also updated the video driver to its most current version through the video card manufacturer's AMD website Also the BIOS is up-to-date I've also run a memory test and quot sfc scannow quot but neither came up with any errors Running an error check on the drive didn't produce any problems either I've already attempted to restore the laptop back to its factory state but I ended up getting the same blue screen after a couple of days I'm out of ideas If anyone has any suggestions or if you need more information let me know Thank you in advance

A:ntoskrnl.exe causing system_service_exception BSOD

Some more info to add:

I tried booting into Safe Mode to see if I still get a BSOD. I do, along with the same "System_Service_Exception" error message. I also reseated the RAM and ran another memory test, this time with Memtest86+ (I used "Windows Memory Diagnostic" before). Once again, the test showed no errors.

I've attached another minidump file, but this time with all of the info that is collected using the "SF Diagnostic Tool" that Windows Seven Forums provides.

http://www.eightforums.com/bsod-crashes-debugging/20916-ntoskrnl-exe-causing-system_service_exception-bsod.html
Relevancy 68.37%

I recently purchased a Gigabyte R9 290X which i installed into my custom built computer to replace the R9 270X. The previous card ran fine and i had no problems with. Obviously before installing the new card i ran DDU (Display driver uninstaller) to remove the previous drivers. After installing and powering the PC up, i installed the latest catalyst software, pretty sure its 14.9, but since then it randomly blue screens.

I have tried older drivers, MEMtest, checking for faults in my SSD and HDD.

I also ran FurMark at benchmark for 15 minutes to check for over heating etc. and the card ran fine and didnt crash for the entire 15 minutes, it then crashed sitting on the windows start page.

Any help would be greatly appreciated.

A:New GPU causing 'ntoskrnl' BSOD randomly

Most of the BSODs are related to this Stop 0x124, so have alook here:

Stop 0x124 - what it means and what to try

While I know how annoying it is to RMA, I think if you can at all you should because graphic cards are temperamental at their best imo.

EDIT
Here are some more ideas.
The first thing I would do is check if the extra power supply is definitely connected to the card and working, and that the temps on card are all normal.

Then I would try using verifier.exe to stress the Ati drivers and see if it's them. But I'm not sure on this because say it is the Ati driver- I think it could happen that stressing a different driver causes the Ati one to trip up. Regardless if verifier.exe doesn't cause any problems I think it is then more likely the card has a fault. If verifier.exe does give you the BSOD, I suppose look for updated BIOS of the card and the latest Catalyst.

There are others with similar problem, multiple suggestions on this page:

AMD Support and Game Forums - Sapphire R9 290 BSOD

Here are 2 from there that are probably worth a punt:
1.
"What worked for me...
1. Uninstalled Catalyst Control Center (CCC).
2. Disabled Hardware Acceleration in Adobe Flash (mainly used for YouTube)."

2.
"I had the same problem as you for the longest time. I tried everything. New ram, fresh windows install, different drivers. Nothing worked. Then I ran Afterburner and went into Settings>General> and checked the box labelled Force Constant Voltage. This fixed it. I havn't had a BSOD in over a month, before they were happening multiple times per day. Apparently the issue is caused by the voltage changing so quickly that the motherboard enacts a failsafe to protect it from damage. Constant voltage may use more power but it works, and its not going to hurt your components."

I know how annoying these BSODs are, best of luck.

http://www.sevenforums.com/bsod-help-support/351321-new-gpu-causing-ntoskrnl-bsod-randomly.html
Relevancy 68.37%

Hello all,

Relative computer noob that somehow built his own computer a few years ago lol. Recently I have been getting the dreaded BSOD almost everytime I play BF3, and I am finally deciding to try to get some help on the matter. The causes seem to vary however I've noticed that ntoskrnl.exe seems to be the culprit more often than not. Again, I'm somewhat of a computer noob so I'm not too sure what to really make of all the dmp files, to say I'm confused would be a huge understatement. I've uploaded my dmp file with this post, and if anyone could chime in on what I should do I would greatly appreciate it.

Thanks!

As far as system specs
Gigabyte 880UD-3H
Phenom 1055t
HD 6870
8gb ram
Windows 7 64bit OEM version

A:BSOD when playing BF3. ntoskrnl.exe seems to be causing it?

Hi deltax,

Majority of the crashes seem to be caused by the 'ntkrnlmp.exe' driver.
Driver Description: NT Kernel & System - Different versions/date stamps according to OS and system specifications
The driver installs with 'Windows updates'.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 4A, {75732e09, 2, 0, fffff8800a3daca0}

Probably caused by : ntkrnlmp.exe ( nt!KiSystemServiceExit+245 )

Followup: MachineOwner
---------

3: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

IRQL_GT_ZERO_AT_SYSTEM_SERVICE (4a)
Returning to usermode from a system call at an IRQL > PASSIVE_LEVEL.
Arguments:
Arg1: 0000000075732e09, Address of system function (system call routine)
Arg2: 0000000000000002, Current IRQL
Arg3: 0000000000000000, 0
Arg4: fffff8800a3daca0, 0

Debugging Details:
------------------


PROCESS_NAME: AvastSvc.exe

BUGCHECK_STR: RAISED_IRQL_FAULT
Another driver that seems to be causing trouble is 'dxgmms1.sys' (DirectX Graphics MMS), which also installs itself via 'Windows Updates'.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1000007E, {ffffffffc0000005, fffff8800533ecee, fffff880021bd6a8, fffff880021bcf00}

Probably caused by : dxgmms1.sys ( dxgmms1!VIDMM_GLOBAL::ReferenceAllocationForPreparation+22 )

Followup: MachineOwner
---------

4: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e)
This is a very common bugcheck. Usually the exception address pinpoints
the driver/function that caused the problem. Always note this address
as well as the link date of the driver/image that contains this address.
Some common problems are exception code 0x80000003. This means a hard
coded breakpoint or assertion was hit, but this system was booted
/NODEBUG. This is not supposed to happen as developers should never have
hardcoded breakpoints in retail code, but ...
If this happens, make sure a debugger gets connected, and the
system is booted /DEBUG. This will let us see why this breakpoint is
happening.
Arguments:
Arg1: ffffffffc0000005, The exception code that was not handled
Arg2: fffff8800533ecee, The address that the exception occurred at
Arg3: fffff880021bd6a8, Exception Record Address
Arg4: fffff880021bcf00, Context Record Address

The following 'Windows update' has failed to install numerous times; which may have an i... Read more

http://www.sevenforums.com/bsod-help-support/281841-bsod-when-playing-bf3-ntoskrnl-exe-seems-causing.html
Relevancy 68.37%

Hello,
i've been having repeated problems with my PC, with it either failing to boot properly, hanging at the logon screen, not loading the desktop properly or just having BSOD's everytime I get into some high RAM usage. I'm on Windows 7. The zipped files requested are attached. 
 
Operating System - Windows 7 Ultimate N 64-bit SP1 x64
 - full retail, installed on custom PC.  date of install 03/12/2014
 
CPU - Intel Core i7 4790K (i think mobo is running it at 4.4 GHz)
GPU - Gigabyte GTX 970
Mobo - Gigabyte Z97-Gaming GT
PSU - Corsair RM650W
 
Custom Desktop build.
 
- other points of note- when the PC hangs on logonscreen/crashes for a BSOD - there is a loud buzzing noise. 
 
 
All help is very much appreciated,
 
Thanks,
Vishmister

http://www.bleepingcomputer.com/forums/t/624173/ntoskrnlexe-driver-causing-bsod/
Relevancy 67.51%

Hello everyone Since yesterday I've started to get BSOD screens frequently I tried any tool I could find but it wouldn't do anything various ntoskrnl.exe BSOD messages error causing After further searches I've found using a dmp reading tool that my blue screens were caused by ntoskrnl exe Here are the dump files in text Code Dump File - - dmp Crash Time PM Bug Check String PAGE FAULT IN NONPAGED AREA Bug Check Code x Parameter fffff a Parameter Parameter fffff ecb a Parameter Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win ldr - Processor x Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time PM Bug Check String IRQL NOT LESS OR EQUAL Bug Check Code x a Parameter Parameter Parameter Parameter fffff ea Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe File Description NT Kernel amp ntoskrnl.exe causing various BSOD error messages System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win ldr - Processor x Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time PM Bug Check String IRQL NOT LESS OR EQUAL Bug Check Code x a Parameter Parameter Parameter Parameter fffff eaa Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win ldr - Processor x Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time AM Bug Check String KMODE EXCEPTION NOT HANDLED Bug Check Code x e Parameter ffffffff c Parameter fffff e cd Parameter Parameter ffffffff ffffffff Caused By Driver atikmdag sys Caused By Address atikmdag sys cc File Description Product Name Company File Version Processor x Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size These are only of them the other ones were from yesterday and disappeared As you can see the BSOD error messages are different Anyway I tried Googling but I can't find anyone with a similar problem to mine Thank you for helping me Edit I forgot to add the BSOD appears randomly Somtimes on the Windows logo booting screen sometimes after a few minutes or hours Even sometimes there's no BSOD screen at all it just completely freezes and I have to shut down my computer

A:ntoskrnl.exe causing various BSOD error messages

http://www.sevenforums.com/crashes-d...tructions.html

http://www.sevenforums.com/bsod-help-support/136376-ntoskrnl-exe-causing-various-bsod-error-messages.html
Relevancy 67.51%

Okay, so I have recently started getting random BSOD errors randomly, from playing minecraft, to microsoft word. I have used Blue Screen Viewer and it has found that Wdf01000.sys and ntoskrnl.exe are causing them. I have attached the minidump to this thread. Please respond. Thanks for your help!

A:Random BSOD, Wdf01000.sys and ntoskrnl.exe seem to be causing them.

I just got another BSOD error and have gotten more info on it.
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.48
Locale ID: 1033

Additional information about the problem:
BCCode: 10d
BCP1: 0000000000000005
BCP2: 0000000000000000
BCP3: 0000000000001202
BCP4: FFFFFA8009E2A260
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\112012-28657-01.dmp
C:\Users\Taylor\AppData\Local\Temp\WER-109356-0.sysdata.xml

http://www.sevenforums.com/bsod-help-support/265586-random-bsod-wdf01000-sys-ntoskrnl-exe-seem-causing-them.html
Relevancy 67.51%

This is a month old build that has been plagued by this kernel BG of Kingston extreme ram Intel I Causing multiple BSOD ntoskrnl.exe+75bc0 K processor Gigabyte Motherboard and a later added EVGA GB video card All inside of a corsair case and W PS I do ntoskrnl.exe+75bc0 Causing multiple BSOD have an Associates in Networking and computer tech but I have never diagnosed a blue screen problem before so this is all new to me As stated in the thread title ntoskrnl.exe+75bc0 Causing multiple BSOD it is the ntoskrnl exe bc kernel that is causing the blue screens and I am not sure what to make of it I used blue screen view and from the help of the board here I used the windows debugging tool and that also pointed to the same ntoskrnl exe bc kernel I downloaded the windows diagnostic tool and hopefully that was done right and properly uploaded because I could use the help I did run memtest and was given a clean bill of health but I might run it again just to be on the safe side I would greatly appreciate any help And merry Christmas John

A:ntoskrnl.exe+75bc0 Causing multiple BSOD

Code:
Microsoft (R) Windows Debugger Version 6.2.9200.20512 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\USER\Downloads\Compressed\SF_24-12-2014\SF_24-12-2014\122314-21231-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.18409.amd64fre.win7sp1_gdr.140303-2144
Machine Name:
Kernel base = 0xfffff800`0344c000 PsLoadedModuleList = 0xfffff800`0368f890
Debug session time: Tue Dec 23 11:32:05.166 2014 (UTC + 6:00)
System Uptime: 0 days 2:26:31.040
Loading Kernel Symbols
...............................................................
................................................................
..............................
Loading User Symbols
Loading unloaded module list
...............
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1A, {41790, fffffa800a7ff910, ffff, 0}

Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+35084 )

Followup: MachineOwner
---------

4: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

MEMORY_MANAGEMENT (1a)
# Any other values for parameter 1 must be individually examined.
Arguments:
Arg1: 0000000000041790, A page table page has been corrupted. On a 64 bit OS, parameter 2
contains the address of the PFN for the corrupted page table page.
On a 32 bit OS, parameter 2 contains a pointer to the number of used
PTEs, and parameter 3 contains the number of used PTEs.
Arg2: fffffa800a7ff910
Arg3: 000000000000ffff
Arg4: 0000000000000000

Debugging Details:
------------------


BUGCHECK_STR: 0x1a_41790

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

PROCESS_NAME: rundll32.exe

CURRENT_IRQL: 0

LAST_CONTROL_TRANSFER: from fffff80003532d50 to fffff800034c1bc0

STACK_TEXT:
fffff880`0e6776e8 fffff800`03532d50 : 00000000`0000001a 00000000`00041790 fffffa80`0a7ff910 00000000`0000ffff : nt!KeBugCheckEx
fffff880`0e6776f0 fffff800`034f47d9 : 00000000`00000000 00000000`739affff fffffa80`00000000 00000000`00000000 : nt! ?? ::FNODOBFM::`string'+0x35084
fffff880`0e6778b0 fffff800`037db0f1 : fffffa80`106b7cd0 00000000`00000000 00000000`00000000 00000000`00000000 : nt!MiRemoveMappedView+0xd9
fffff880`0e6779d0 fffff800`037db4f3 : 00000000`00000000 00000000`73950000 fffffa80`00000001 fffffa80`10fd8e60 : nt!MiUnmapViewOfSection+0x1b1
fffff880`0e677a90 fffff800`034c0e53 : fffffa80`0d16e060 fffff880`0e677b60 fffffa80`0de3e790 00000000`00000026 : nt!NtUnmapViewOfSection+0x5f
fffff880`0e677ae0 00000000`76ea155a : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
00000000`0014ad38 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x76ea155a


STACK_COMMAND: kb

FOLLOWUP_IP:
nt! ?? ::FNODOBFM::`string'+35084
fffff800`03532d50 cc int 3

SYMBOL_STACK_INDEX: 1

SYMBOL_NAME: nt! ?? ::FNODOBFM::`s... Read more

http://www.sevenforums.com/bsod-help-support/356264-ntoskrnl-exe-75bc0-causing-multiple-bsod.html
Relevancy 66.65%

hi, im getting random bsod errors mainly by ntoskrnl.exe and also i experience random freezing when i play games for around 10-20 mins. it freezes with a distorted sound.

attached dump files. please take a look.

Relevancy 66.22%

Hello

My computer BSOD about 9-10 times a day and it's quite annoying.
Here is what I tried:
1. Upgraded from windows 7 to windows 10
2. Ran memtest - RAM had about 30 problems but then I put the ram in another computer and ran the test there-> 0 errors
3. Updated GPU drivers
4. Ran scannow from command prompt ->no problems

I attached the minidump of one of the most common type of BSOD(by ntoskrnl.exe)

Can someone please identify the problem? Im clueless about BSOD. Thank you

A:ntoskrnl.exe causing BSOD at random times , error 0x0000003b

Hi SmithyBoy,

I'll go deeper on the memtest part.
Did you run memtest on each stick in each used slot separated from the other sticks?

Please fill in your system specsPlease follow this tutorial and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely.How to fill in your system specs:

http://www.tenforums.com/bsod-crashes-debugging/35161-ntoskrnl-exe-causing-bsod-random-times-error-0x0000003b.html
Relevancy 54.18%

I recently bought a new GPU because I thought my GPU was causing crashes while playing. Then I ran WInCrashReport and it told me that ntoskrnl.exe is causing my PC to crash and I do not know how to fix it

http://www.tenforums.com/bsod-crashes-debugging/68810-ntoskrnl-exe-causing-my-pc-crash.html
Relevancy 54.18%

Hi I'm happy to have found this amazing forum and I'm pretty sure I'll get all my problems solved or answered Alright enough talk let me explain my issue Almost weeks ago I formatted my computer Full Install and days later I started having issues when playing music or videos that contain sound Every time I listen to music or watch a video I get this sound as if the computer is ?? causing ntoskrnl.exe problem the going to crash but nothing happens It happens randomly I even updated my sound and graphics card drivers and still no luck Yesterday I was ntoskrnl.exe causing the problem ?? using my webcam and all of a sudden BSOD Also while on the BSOD the computer kept making the sound I always hear when listening to music So I had to turned off the computer because the sound is ntoskrnl.exe causing the problem ?? very annoying So this is the results of the dump file but I'm not sure if this BSOD has to do anything with the noise I've been getting Is Windows - bit - ntoskrnl.exe causing the problem ?? Age of System - About years and months - Age of OS - About Weeks Thanks for your time z r w

A:ntoskrnl.exe causing the problem ??

64 bit kernel running 32 bit driver? Has your audio worked properly since the new installation?

Was the driver an automatic installation through windows update? or did you get the chance to pick and choose?

http://www.sevenforums.com/bsod-help-support/124202-ntoskrnl-exe-causing-problem.html
Relevancy 53.75%

This has been extremely frustrating for BSOD safe causing in GMER 7 BSOD ataport.sys mode Windows me I come home from working and my cousin tells me my computer keeps going blue and restarting So now my computer will only run in safe mode I have spybot Kaspersky won t run in safe mode AVS none of them seem to do the trick From what I can tell it seems to be the win virus every time I get rid of it it seems to come back I would get rid of it then my computer would be fine now it won t run in normal at all This is the message I get on blue screen no images sorry STOp x E xc x C xC F DC x ataport sys - address base BSOD Windows 7 ataport.sys GMER causing BSOD in safe mode at date BSOD Windows 7 ataport.sys GMER causing BSOD in safe mode stamp a b f My dvd drive does not BSOD Windows 7 ataport.sys GMER causing BSOD in safe mode work so reformatting at this time is not an option Only thing I could think of is reformat using a thumb drive but all I have is a gb and I dont have the money to go out and buy a new one So now im fresh out of ideas Is there anyway I can fix this without going out and buying a new dvd drive usb Also im running windows ultimate and I get blue screen of death when running GMER in the middle of scanning so i cant upload a log from it I can tell theres a rootkit installed atleast two because before it crashes it shows two on the hardisk along with other minor ones DDS Ver - - - NTFSx NETWORK Internet Explorer BrowserJavaVersion Run by at on - - Running Processes Pseudo HJT Report mDefault Page URL hxxp www yahoo com mStart Page about blank BHO amp Yahoo Toolbar Helper d -c f - efb- b - eca - c program files yahoo companion installs cpn yt dll BHO HP Print Enhancer c e- - -bf - c - c program files hp digital imaging smart web printing hpswp printenhancer dll BHO BA E- EC- DE-B A -E D - No File BHO Adobe PDF Link Helper df c-e ad- -a -fa c ebdc - c program files common files adobe acrobat activex AcroIEHelperShim dll BHO Spybot-S amp D IE Protection - f - d - - d f - c progra spybot SDHelper dll BHO IEVkbdBHO Class ab -e d - f -a a - fa cca c - c program files kaspersky lab kaspersky internet security ievkbd dll BHO C C A-E - b - D - CECB - No File BHO RoboForm BHO d a - d - d - - e a - c program files siber systems ai roboform roboform dll BHO Groove GFS Browser Helper - c - d -b f - bbc d a e - c progra mif ba office GROOVEEX DLL BHO BF -DF - f-B DA- D FC E E - No File BHO Windows Live ID Sign-in Helper d - c - abf- ecc- c - c program files common files microsoft shared windows live WindowsLiveLogin dll BHO D -D - -BAB -AB A - No File BHO Office Document Cache Handler b f a - e - -ba - b e ff - c progra mif ba office URLREDIR DLL BHO Java tm Plug-In SSV Helper dbc -a - b-bc - c c c a - c program files java jre bin jp ssv dll BHO FilterBHO Class e cf -d - a- f - f a f - c program files kaspersky lab kaspersky internet security klwtbbho dll BHO SingleInstance Class fdad da - a - fd - c - f ac - c program files yahoo companion installs cpn YTSingleInstance dll BHO HP Smart BHO Class ffffffff-cf e- f b-bdc - e e a - c program files hp digital imaging smart web printing hpswp BHO dll TB Yahoo Toolbar ef bd -c fb- d - f- d f - c program files yahoo companion installs cpn yt dll TB amp RoboForm d a - d - d - - e a - c program files siber systems ai roboform roboform dll TB D -D - -BAB -AB A - No File EB HP Smart Web Printing d d - bd - -a -cfc a - c program files hp digital imaging smart web printing hpswp bho dll uRun RoboForm quot c program files siber systems ai roboform RoboTaskBarIcon exe quot uRun msnmsgr quot c program files windows live messenger msnmsgr exe quot background uRun AnyDVD quot c program files slysoft anydvd AnyDVD exe quot uRun Advanced SystemCare c program files iobit advanced systemcare ASCTray exe mRun Adobe Reader Speed Launcher quot c program files adobe reader reader Reader sl exe quot mRun Adobe ARM quot c program files common files adobe arm AdobeARM exe quot mRun HP Software Update c pr... Read more

https://forums.techguy.org/threads/bsod-windows-7-ataport-sys-gmer-causing-bsod-in-safe-mode.1000724/
Relevancy 53.75%

Hello.
 
I'm running Windows 10, and before that had been running 8.1. In both OS versions, I have gotten mutilple BSODs, specifically: KMODE_EXCEPTION_NOT_HANDLED, BAD_POOL_HEADER, SYSTEM_SERVICE_EXCEPTION, and MEMORY_MANAGEMENT.
 
BlueScreenView says a file named "ntoskrnl.exe" is to blame every time.
 
I ran Memtest on 8.1 and got no errors. I'm afraid of running Driver Verifier because if I get locked out of my computer because of a VERIFIER_ENABLED BSOD, I'm not sure how I would get back in (I can't boot to safe mode using F8).
 
Any help getting rid of these blue screens would be very much appreciated.
 
I can't upload the .dmp files directly ("you aren't permitted to upload this kind of file"), but I can put them on MEGA, so here is the link: https://mega.nz/#F!6xJ0UbxJ!xhQ53lTwgXQdXh6AkwQ9XA

A:"ntoskrnl.exe" causing multiple BSODs

Sorry for the delay in responding.In most cases, the reason that you can't upload the dump files is that they haven't been zipped up.  The forums only allow certain kinds of files to be uploaded, and .zip is the one that's used the most by us. There's a different way to get to Safe Mode in Win8/10.  But don't worry about it now - we'll discuss it if it's needed. Please provide this information so we can provide a complete analysis (from the Pinned Topic at the top of the forum):  http://www.bleepingcomputer.com/forums/t/576314/blue-screen-of-death-bsod-posting-instructions-windows-10-81-8-7-vista/Out of 8 memory dumps there were 5 different BSOD  (aka STOP or BugCheck) error codes.  The differing error codes are usually symptomatic of a lower level problem within the system. They are usually caused by one of these things (the list is not in any sort of order):- borked (broken) hardware (several different procedures used to isolate the problem device)- BIOS issues (check for updates at the motherboard manufacturer's website)- overclocking/overheating - You'll know if you're overclocking or not. If uncertain we can suggest things to check.- dirt/dust/hair/fur/crud inside the case.  Blow out the case/vents with canned air (DO NOT use an air compressor or vacuum as they can cause damage to the system)- missing Windows Updates- compatibility issues (3rd party hardware/drivers), older systems, or even pirated systems- low-level driver problems- or even malware (scanned for when we ask for hardware diagnostics from http://www.carrona.org/initdiag.html or http://www.carrona.org/hwdiag.html ).Please get a head start on the hardware diagnostics - they are located here:  http://www.carrona.org/hwdiag.htmlYour UEFI/BIOS (version F1) dates from 2014.  Please check at the manufacturer's website to see if there are any UEFI/BIOS updates available for your system.  If you are able to install the update through Windows (without booting from an external drive), then go ahead and update it.  WARNING - if the computer might shut down during this procedure, please don't do it, as this may physically damage the computer and prevent it from booting.MalwareBytes may be conflicting with your Avast.  Please uninstall it for now (for testing purposes)Should you decide to reinstall it, DO NOT consent to the trial of the Pro version - as that's the component that starts with Windows and may be conflicting. Logitech drivers date from 2012 and may not be compatible w/Win10.  Please uninstall the Logitech device and its software.  Then, if you want to continue using it, download and install the latest, Win10 compatible software from Logitech. Analysis:The following is for informational purposes only.[font=lucida console]**************************Thu Aug 13 19:11:37.786 2015 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\081315-7656-01.dmp]
Windows 8 Kernel Version 10240 MP (4 procs) Free x64
Built by: [B]1024[/B]0.16430.amd64fre.th1.150807-2049
System Uptime:[B]0 days 20:53:09.457[/B]
Probably caused by :[B]memory_corruption ( ONE_BIT )[/B]
BugCheck [B]1A, {41792, fffff680002d14b8, 40000000000000, 0}[/B]
BugCheck Info: [url=http://www.carrona.org/bsodindx.html#0x0000001A]MEMORY_MANAGEMENT (1a)[/url]
Arguments:
Arg1: 0000000000041792, A corrupt PTE has been detected. Parameter 2 contains the address of
    the PTE. Parameters 3/4 contain the low/high parts of the PTE.
Arg2: fffff680002d14b8
Arg3: 0040000000000000
Arg4: 0000000000000000
BUGCHECK_STR:  0x1a_41792
PROCESS_NAME:  Bioshock2.exe
FAILURE_BUCKET_ID: [B]MEMORY_CORRUPTION_ONE_BIT[/B]
CPUID:        "Intel(R) Core(TM) i5-4440 CPU @ 3.10GHz"
MaxSpeed:     3100
CurrentSpee... Read more

http://www.bleepingcomputer.com/forums/t/586258/ntoskrnlexe-causing-multiple-bsods/
Relevancy 53.75%

Heya Ive been having these bluescreens from time to time mostly every other day I get a different quot crash quot everytime KMODE EXCEPTION NOT HANDLED DRIVER OVERRAN STACK BUFFER IRQL NOT LESS OR EQUAL BAD POOL HEADER all these are caused by the same driver ntoskrnl exe this is the latest bluescreen seen from bluescreenviewer Attachment Operating System Windows Pro -bit CPU Intel Core i K for kinds all problem of ntoskrnl.exe causing me GHz C Haswell nm Technology RAM GB Dual-Channel DDR MHz - - - Motherboard Gigabyte Technology Co Ltd Z X-D H-CF SOCKET C Graphics ASUS VG HE x Hz ASUS VE x Hz ntoskrnl.exe causing all kinds of problem for me Intel HD Graphics Gigabyte MB NVIDIA GeForce GTX Gigabyte C Storage GB Seagate ST AS SATA C GB INTEL SSDSC CT A SSD GB Samsung SSD EVO GB SSD C Optical Drives ASUS ntoskrnl.exe causing all kinds of problem for me DVD RAM GH N Audio NVIDIA Virtual Audio Device Wave Extensible WDM Here is the rarfile from SF Diagnostic tool Attachment Help me Obi-Wan Kenobi You're my only hope

A:ntoskrnl.exe causing all kinds of problem for me

Things ive tried so far:

Memtest86 - OK
Updated to the latest Bios - OK
Updated all drivers (Graphics, sound, internal graphic, etc) - OK
Checked for virus, malware - OK

http://www.eightforums.com/bsod-crashes-debugging/52363-ntoskrnl-exe-causing-all-kinds-problem-me.html
Relevancy 53.75%

I have had a new rig for about three months now and during that time in increasing frequency I have been getting the DRIVER IRQL blue screen causing ntoskrnl.exe is NOT LESS OR EQUAL crash error I have tried unplugging various peripherals and updated all of my drivers in the hopes of discovering the route of ntoskrnl.exe is causing blue screen the problem all to no avail The minidump file suggests that ntoskrnl exe is the cause of the issue so I have run chkdsk in safe mode but it appears to be doing nothing of any use I have thought about running a repair install but I don t have my windows disks so I can t I am running through an ASUS P G T-MLX motherboard with gb ram and an NVIDIA Geeforce GTX graphics card I also run a Saffire LE external sound card I m getting pretty desperate now as this issue is seriously ntoskrnl.exe is causing blue screen impeding my ability to do my work Any help and advice would be greatly appreciated Regards Ben nbsp

Relevancy 53.75%

So out of nowhere last help! causing multiple BSODs, ntoskrnl.exe please night my PC suddenly BSOD'd suddenly while just browsing things ntoskrnl.exe causing multiple BSODs, please help! It's never had any issues it's about a year old now It happened again at some point overnight as I woke up to ntoskrnl.exe causing multiple BSODs, please help! the login screen and it telling me it recovered from a blue screen Then it happened once more today about hours ago during a League of Legends Dominion match My girlfriend suggested from what little I knew that I update my graphics drivers which I did and rebooted Still if I could get anything more concrete it'd really help The last error that popped up was Quote Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode c BCP BCP BCP BCP FFFFFA D CDD OS Version Service Pack Product I'm using an HP Pavilion Elite HPE with an i - processor GB of RAM and a Radeon graphics card I ran a monitoring program and the core temperatures were around - C while idling and the graphics card never got above C so it doesn't look like it's overheating I'm including the minidumps hopefully someone can help point me in the right direction here

A:ntoskrnl.exe causing multiple BSODs, please help!

  
Quote: Originally Posted by AvalonBright


So, out of nowhere last night, my PC suddenly BSOD'd suddenly while just browsing things. It's never had any issues, it's about a year old now. It happened again at some point overnight as I woke up to the login screen and it telling me it recovered from a blue screen. Then, it happened once more today about 2 hours ago during a League of Legends Dominion match.

My girlfriend suggested from what little I knew that I update my graphics drivers, which I did and rebooted. Still, if I could get anything more concrete it'd really help.

The last error that popped up was






Quote:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: c2
BCP1: 0000000000000007
BCP2: 0000000000001097
BCP3: 0000000009060001
BCP4: FFFFFA8007D8CDD0
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1.


I'm using an HP Pavilion Elite HPE, with an i7-480 processor, 8GB of RAM, and a Radeon 5770 graphics card. I ran a monitoring program and the core temperatures were around 55-68 C while idling, and the graphics card never got above 57 C, so it doesn't look like it's overheating. I'm including the minidumps, hopefully someone can help point me in the right direction here.



Two issues
1-Please remove any CD visualization programs such as Daemon Tools and Alcohol 120%.

They use a driver, found in your dmp, called sptd.sys, that is notorious for causing BSODs.

Use this SPTD uninstaller DuplexSecure - Downloads DuplexSecure - FAQ

when you're done you can use this Freeware MagicISO Virtual CD/DVD-ROM(MagicDisc) in its place.
2-Memory exception

These crashes were caused by a memory exception. Please run these two tests to verify your memory and find which driver is causing the problem.
*-Memtest.

*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

RAM - Test with Memtest86+

*-Driver verifier






Quote:
I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If y... Read more

http://www.sevenforums.com/bsod-help-support/195328-ntoskrnl-exe-causing-multiple-bsods-please-help.html
Relevancy 53.75%

Hi there Firstly here are the specs to the machine in question CPU AMD Athlon X GHz Mainboard Biostar GF E RAM x Chaintech DDR MHz GB module x Some other brand DDR MHz GB module that I sorts all causing BSODs of and ntoskrnl.exe others acquired at a later stage HDD x SATA GB Seagate drive primary x SATA GB Seagate drive secondary PSU Cooler Master Extreme Power W GPU GeForce GTS AMP running v drivers OS Windows Professional bit AntiVirus Kaspersky Internet ntoskrnl.exe and others causing all sorts of BSODs Security KB ntoskrnl.exe and others causing all sorts of BSODs Razer Lycosa Mouse CM Storm Sentinel Advanced Over the past few weeks my PC has been BSODing At first it would do so only after exiting a high performance game like War Thunder not heat related This at first I thought was caused by Nvidia drivers I then updated said drivers and it made no difference Running the PC in safe mode works perfectly which led me to believe it ntoskrnl.exe and others causing all sorts of BSODs was indeed driver related I wasn't able to create minidump files for some reason even when the correct options were set up so there was no way for me to accurately determine the cause back then I decided to just format my drive and re-do everything However even without the Nvidia drivers it would still BSOD randomly I decided to do some Windows updates just in case but this didn't help either I went as far as installing Windows on another hdd just in case it was a hdd issue Recently the PC has been BSODing as soon as it gets to the desktop and sometimes if I'm lucky it'll last a little longer It's not a heat issue as I've monitored temperatures before the event and they seem normal After the re-install I am now able for some reason the options actually work now to save dump files after a BSOD and BlueScreenViewer is telling me that these BSODs are being caused by various drivers such as ntoskrnl exe tcpip sys Ntfs sys ndis sys win k sys and one caused by Kaspersky's kneps sys of these BSODs are caused by Windows drivers This is probably why it would BSOD even after a fresh Windows install What I've determined - Highly unlikely a hard drive problem Otherwise it would mean both hard drives have the same error even when check disk reports no problems on either of them - Not a power issue I've tested the system using a new PSU and there's no change - It doesn't BSOD in safe mode so would this mean it isn't the RAM It BSODs with either RAM card installed so it means it's either both RAM cards neither RAM cards one of the two or the RAM slots themselves I've also done a re-build of the system just in case it was dust or something In an extremely clean state it ran well with a huge reduction in BSODs But then they slowly crept back to the stage it's in now Anyway I've added a few dump files ranging from the th to today th Jan I have minidump files dating as far back as Jan if you'd like me to add them Let me know what you guys think Thanks

A:ntoskrnl.exe and others causing all sorts of BSODs

Hi TheRandomGuy.

We are seeing a lot of software/drivers are failing those are enough to cause BSODs, but there is something more important error report.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 50, {ffffffffffffff8d, 1, fffff800030afd0b, ff00000000000000}
Could not read faulting driver name
Probably caused by : hardware ( nt!FsRtlUninitializeOplock+ff )

Followup: MachineOwner
---------
A hardware failure may cause any sort of other failure. So it is the first and most important to check the hardware's part.

Stress test the CPU.
Hardware - Stress Test With Prime95

Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.
If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Are you overclocking? As you are getting BSODs, you should stop overclocking and run all the hardware components like CPU, GPU and RAM to their default settings.

It seems to be an old biostar. Is the computer hot? Report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy. Alternatively, you can publish a Speccy snapshot too: Speccy - Publish Snapshot of your System Specs .

Check if the Power Supply Unit (PSU) supplying adequate power to the computer or not.
eXtreme Power Supply Calculator
Also let us know the wattage of the PSU.

Will decide the next courses of action seeing these results.

http://www.sevenforums.com/bsod-help-support/320276-ntoskrnl-exe-others-causing-all-sorts-bsods.html
Relevancy 53.32%

Hey guys so I've been getting some random BSOD errors every few days or so I usually leave my computer on when I am at work or sleep and either when I come home Random BSOD error ntoskrnl.exe (address driver ntoskrnl.exe+74ec0) or wake up my computer is off So I turn it on and it says that the computer didn't Random BSOD error driver ntoskrnl.exe (address ntoskrnl.exe+74ec0) shut down properly when I start up I downloaded the BlueScreenView and noticed I've had some BSOD three times within days One Random BSOD error driver ntoskrnl.exe (address ntoskrnl.exe+74ec0) was a PAGE FAULT IN NONPAGED AREA error which I believe was a RAM problem i bought new RAM and installed it plus OCed it to but I believe it was making my system unstable so I reset the speed to default and haven't gotten that error again but after that I've gotten two IRQL NOT LESS OR EQUAL errors related to ntoskrnl exe I did some research online and from what I read it could be a number of problems I'm just not sure where to start and could really use some guidance and advice I uploaded my dmp files for anyone who knows how to look at these Thank in advance

A:Random BSOD error driver ntoskrnl.exe (address ntoskrnl.exe+74ec0)

Welcome to 7F. I'll take a look at your dumps and see if I can get you BSOD free.


One

 NETGEAR NEUTRAL WIRELESS SOLUTION

Your Netgear Neutral Wireless Solution driver has been flagged. It is quite old a could probably do with updating. Check for updates here
Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {0, 2, 1, fffff800034c88ac}

*** WARNING: Unable to verify timestamp for scmndisp.sys
*** ERROR: Module load completed but symbols could not be loaded for scmndisp.sys
Probably caused by : scmndisp.sys ( scmndisp+16d1 )

Followup: MachineOwner
---------

1: kd> lmvm scmndisp
start end module name
fffff880`0188b000 fffff880`01895000 scmndisp T (no symbols)
Loaded symbol image file: scmndisp.sys
Image path: \SystemRoot\system32\DRIVERS\scmndisp.sys
Image name: scmndisp.sys
Timestamp: Fri May 27 11:30:22 2011 (4DDF7D3E)
CheckSum: 00009C0C
ImageSize: 0000A000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4


Two

 HARDWARE DIAGNOSTICS

A few of your dumps (0x50, 0x124) are pointing towards hardware errors. 0x124s are usually always hardware errors but rarely give us an indication of what the problem actually is. In this case we may have struck lucky as this particular one shows up ASUS AI Suite III. The utilities listed below are the ones I'm concerned about.Attachment 353971


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa800752d028, Address of the WHEA_ERROR_RECORD structure.
Arg3: 00000000bf800000, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000000000124, Low order 32-bits of the MCi_STATUS value.

Debugging Details:
------------------
BUGCHECK_STR: 0x124_GenuineIntel

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

PROCESS_NAME: AISuite3.exe

CURRENT_IRQL: f

ANALYSIS_VERSION: 6.3.9600.17029 (debuggers(dbg).140219-1702) amd64fre
We have seen motherboard packaged utilities cause 0x124s in the past and it could be the case here.
Uninstall ASUS AI Suite III and test the system for stability.
Run SeaTools to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use
Download and run MemTest86+ to test your RAM. RAM - Test with Memtest86+


   Note
Attachment 353972 Run MemTest86+ for at least 8 passes. Ideally set it off before you go to bed and leave it overnight, we're looking for zero errors here. A single error will show something's going bad with your RAM.


Three

 NVIDIA GPU

You've also received a 0x116 which is a VIDEO_TDR_ERROR (Timeout Detection & Recovery) which means your GPU driver has crashed and has failed to recover in time. This could be down to the driver, the card itself or possibly the power to the card.
Code:
******************************************************************************... Read more

http://www.sevenforums.com/bsod-help-support/365399-random-bsod-error-driver-ntoskrnl-exe-address-ntoskrnl-exe-74ec0.html
Relevancy 52.89%

Jan , Crash Address All !! BSOD ntoskrnl.exe+80640 the Time ntoskrnl.exe ------------------------------------------- How to Solve - I've uninstalled my windows and recover my laptop with recovery DVD to it's original factory state original windows - Never installed Norton internet security again I'm using Microsoft Security Essentials now - Updated my Graphic Card Driver Intel Wifi Driver Sound Card Driver And some other drivers It's been two months now with no BSOD Thanks to dear Arc and gregrocker Thank you guys ------------------------------------------- Oct ------------------------------------------- Hi guys It's almost a year that I have problems with BSOD ntoskrnl.exe , All the Time !! Crash Address ntoskrnl.exe+80640 BSODs it use to be Atikmdag BSOD but I solve that with updating my Graphic card Driver and Changing Atikmdag sys file in Windows System folder But now it's about months that I get ntoskrnl exe BSODs in lot's of situations Web surfing Windows log on Working with Unity Working with files and Really lot's of Times Even in Safe Mode with Networking I guess it's because of my Network driver because I got BSOD in Safe Mode with Network but I never got a BSOD in normal Safe mode BTW I dunno how to solve it Please Help me these BSODs are sooooooooo annoying Here is my System Specs It's Msi GX CPU Intel R Core TM i CPU M GHz Main MICRO-STAR INTERNATIONAL CO LTD MS- Bios BIOS Date Ver Memory GB HDD ST AS ATA Device Sound Card AMD High Definition Audio Device High Definition Audio Device Graphic ATI Mobility Radeon HD Series - GB GDDR OS Microsoft Windows Ultimate -bit Multiprocessor Free Service Pack it's weird that I've finished writing this without a BSOD Here is the Zip file Created with SF Diagnostic Tool

A:BSOD ntoskrnl.exe , All the Time !! Crash Address ntoskrnl.exe+80640

Code:
fffff800`00b9cc48 fffff880`010b75fcUnable to load image \SystemRoot\System32\Drivers\sptd.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for sptd.sys
*** ERROR: Module load completed but symbols could not be loaded for sptd.sys
sptd+0x4b5fc
Daemon Tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known BSOD causer. Uninstall Alcohol 120% at first. Then download SPTD standalone installer from Disk-Tools.com, and execute the downloaded file as guided below :
Double click to open it.
Click this button only:

If it is grayed out, as in the picture, there is no more SPTD in your system, and you just close the window.
Next uninstall Virtual CloneDrive, as vclone.sys is as fatal as SPTD.sys, too.
After doing these two, report the situation back.

http://www.sevenforums.com/bsod-help-support/309093-bsod-ntoskrnl-exe-all-time-crash-address-ntoskrnl-exe-80640-a.html
Relevancy 52.89%

i keep getting BSOD when playing game new graphics i dont know where to start when its comes to BSOD stuff

110414-10576-01.dmp 11/4/2014 10:48:39 PM 0x00000124 00000000`00000000 fffffa80`0af318f8 00000000`00000000 00000000`00000000 ntoskrnl.exe ntoskrnl.exe+4a63cc NT Kernel & System Microsoft? Windows? Operating System Microsoft Corporation 6.1.7600.16385 (win7_rtm.090713-1255) x64 ntoskrnl.exe+4a63cc C:\Windows\Minidump\110414-10576-01.dmp 6 15 7600 262,144 11/4/2014 10:48:41 PM is some info i dont know what else yall need

A:0x00000124 ntoskrnl.exe ntoskrnl.exe+4a63cc BSOD Error runninganygame

Please Help

http://www.sevenforums.com/bsod-help-support/351242-0x00000124-ntoskrnl-exe-ntoskrnl-exe-4a63cc-bsod-error-runninganygame.html
Relevancy 52.89%

Hi to make things easier for you dxgmms1.sys,ntoskrnl.exe,Ntfs.sys BSOD Address:ntoskrnl.exe+75bc0; below is the Bug Check String Driver and crash address SYSTEM SERVICE EXCEPTION dxgmms sys ntoskrnl exe bc MEMORY MANAGEMENT ntoskrnl exe ntoskrnl exe bc SYSTEM SERVICE EXCEPTION ntoskrnl exe ntoskrnl exe bc NTFS FILE SYSTEM Ntfs sys ntoskrnl exe bc IRQL NOT LESS OR EQUAL ntoskrnl exe ntoskrnl exe bc unrelated how could I make nice table above I have searched the forum Problem BSOD randomly usually graphics related eg flash games in chrome graphics related software Mathematica Problem I use an internet usb G device to connect to internet Every morning the device will not connect to internet and computer will hang on shutting down screen when I BSOD Address:ntoskrnl.exe+75bc0; dxgmms1.sys,ntoskrnl.exe,Ntfs.sys restart I have to manually turn off and back on again I think this may be a dying capacitor on motherboard that needs boot's to get excited Problem Chrome quot aw snap quot happens regularly and is usually flash content related even ad banners seem to cause it from time to time I have reinstalled chrome checked plugins etc etc no luck Internet explorer runs stable but for example in flash games it seems to momentarily freeze and then catch up BSOD Address:ntoskrnl.exe+75bc0; dxgmms1.sys,ntoskrnl.exe,Ntfs.sys with itself again These are moments where I think chrome would have crashed Things I've done SFC scan All's well Memtest I did pass it took an hour everything fine Will put it on over night tonight Checked for latest drivers Also have latest BIOS Checked win update Ran Intel Burn everything ok max stress over Gb RAM run min max temp thank you Noctua NH-C P this is with quiet adaptor too lol Ran malwarebytes found nothing toxic Ran SSDlife Free health SSD seems fine Bought a new motherboard assuming that the current one is going bad I haven't switched over to it yet and thought I should investigate a little further before I do ie bad RAM CPU Power Supply SSD CPU seems fine RAM passed test but will test further My own quot opinion quot until today was that there is a fault on motherboard probably with usb hardware Now I realise that it could be the power supply but I have no way to test this bar buy a new one My analysis bad motherboard or bad PSU Either way not getting away with cheap fix methinks UPDATE I enabled verifier exe using this Driver Verifier - Enable and Disable Windows crashes just before going to desktop I had to boot last known config to get up and running again IE I CAN RELIABLY CREATE BSOD USING VERIFIER EXE WITH GIVEN INSTRUCTIONS So I am going to try focusing on drivers loaded at startup by process of elimination Is there a quick way to find out which one Below is the Check String Driver and crash address for the BSOD's when using verifier exe IRQL NOT LESS OR EQUAL ntoskrnl exe ntoskrnl exe bc DRIVER IRQL NOT LESS OR EQUAL RNDISMPX SYS RNDISMPX SYS a UPDATE If I choose or more non Microsoft drivers in verifier exe I get BSOD different check strings but always at the same address Also computer seems more unstable since engaging with verifier exe I feel I have given a thorough evaluation based on information in this forum and would appreciate feedback from those with more expertise than I UPDATE Another Memtest gave errors on pass Questions any chance poor power supply can cause this anyone have experience increasing voltage to make this go away would bad RAM explain all my problems ok fine i'll go through RAM and the slots and find the bad one sigh major sigh positively tragic sigh UPDATE Started with slot with stick of RAM Did memtest but had an idea I turned on verifier exe with all rd party drivers selected and my theory was to replicate the BSOD I got earlier at startup Went through each slot each RAM combo's of RAM and then to add insult to injury with all sticks in exactly same as before no BSOD Life is tough So maybe RAM wasn't properly seated all this time or maybe I need to test the RAM proper... Read more

A:BSOD Address:ntoskrnl.exe+75bc0; dxgmms1.sys,ntoskrnl.exe,Ntfs.sys

**************UPDATE 5 ****************




The sequence of events went as follows.
RAM test 1 pass was passed. Verifier.exe caused immediate BSOD on windows start when activated. Trying to hunt down drivers revealed any combo of 3 or more drivers gave BSOD at startup. Randomly decided to recheck RAM. Failed memtest after 27 minutes pass 1. Found one RAM stick that passed after one pass slot0. Got fed up of waiting for other slot's. Devised a plan to use verifier to check the RAM by seeing which combo's of RAM sticks gave BSOD on startup. All combo's passed. And now verifier does not give BSOD on any setting. Began to hate life. Cheered myself up with prospect of sleep. Put all 16 Gb RAM in properly and ran mentest for 18 hours, 6 passes. No error. Still no verifier.exe errors when enabled. Wrote this update.


If RAM failed after 27min one test, and then after swapping around a retest of 18 hours has no error, one would presume the RAM may be ok. Equally, I believe one could say the RAM is suspect. So, if the test is failed it really doesn't tell us anything except there is a problem somewhere. But we know there is a problem since we have BSOD!!! If I hadn't rerun the test I wouldn't question the RAM.

So the question is: how do I categorically ensure that a stick of RAM is good? Is memtest on RAM with an alternative working computer enough?



In summary:

I ran memtest for 18 hours, which was 6 passes. No problems detected. Using verifier.exe with protocols given on this forum I no longer get BSOD.

Currently my hypothesis is that the RAM was never seated correctly, or given that it takes a bit of force to insert correctly into motherboard, the flexing has at least temporarily defused whatever fault was causing my BSOD. Tenuous I know. But I really have no other explanation other than something somewhere on the motherboard or power is failing, or even the RAM.

http://www.sevenforums.com/bsod-help-support/351171-bsod-address-ntoskrnl-exe-75bc0-dxgmms1-sys-ntoskrnl-exe-ntfs-sys.html
Relevancy 52.89%

I'm getting random Blue Screens and can't figure out why. I'm not running any hardcore programs. I'm mostly just using Microsoft Office and Firefox. The BSOD's seem to happen when I'm in Outlook, Excel or Firefox. Haven't been able to determine exactly which at the time as I'm moving back and forth between them quite often.

I've tried the SFC command and it didn't find anything. I used BlueScreenViewer but not a lot of help. All drivers for sound and video have been updated. I've also updated the firmware to the Crucial M4 SSD version 040H.

Any insight would be great.

Specs:
Laptop - HP EliteBook 8560w
CPU - Intel i7-2670QM
RAM - Hynix/Hyundai 8.0 GB Ram
SSD - M4-CT256M4 SSD
Audio - AMD High Definition Audio
Video - AMD FirePro M5950
OS - Windows 7 Pro 64-bit

A:Random BSOD Reporting ntoskrnl.exe+75c40 & ntoskrnl.exe+7efc0

Update the firmware of your Crucial M4-CT256M4SSD2.

And, Uninstall McAfee Using McAfee Removal Tool. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.
Download, install and update those, and then run full system scans with both of them, one by one.

Free up the startup.
Click on the Start button
Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the “Startup” tab.
Deselect all items other than the antivirus and touchpad driver SynTPEnh.
Apply > OK
Accept then restart.
Let us know the results.

http://www.sevenforums.com/bsod-help-support/281927-random-bsod-reporting-ntoskrnl-exe-75c40-ntoskrnl-exe-7efc0.html
Relevancy 52.89%

BSOD random, probably under heavy load situations. I dont know how to do.


DM log collector file attached

many thanks

A:BSOD random most times ntoskrnl.exe+748c0 and ntoskrnl.exe+74ec0

Hi berdini.


Code:
DEFAULT_BUCKET_ID: GS_FALSE_POSITIVE_MISSING_GSFRAME
Scan the system for possible virus infection with the following programs.
Anti-rootkit utility TDSSKiller
Windows Defender Offline
Let us know the results.
____________________________________

Code:
BugCheck F7, {fffff8800a01ff08, f8800125d135, ffff077ffeda2eca, 0}

Probably caused by : Ntfs.sys ( Ntfs!_report_gsfailure+26 )

Followup: MachineOwner
---------

http://www.sevenforums.com/bsod-help-support/373211-bsod-random-most-times-ntoskrnl-exe-748c0-ntoskrnl-exe-74ec0.html
Relevancy 52.89%

Got my first blue screen of death tonight had firefox opened one watching youtube video another browsing internet After bsod /adress (ntoskrnl.exe+72a40) caused by driver (ntoskrnl.exe) BSOD it restarted i login but just black screen with cursor ctrl alt delete worked so i shut my computer down Boot up normally after check my minidump file bsod cause BSOD caused by driver (ntoskrnl.exe) /adress (ntoskrnl.exe+72a40) by ntoskrnl exe Did little search on google find BSOD caused by driver (ntoskrnl.exe) /adress (ntoskrnl.exe+72a40) has to do with ram and hard drive Downloaded wd data life guard diagnostic for my mechanic drive which is healthy but my ssd on shows failed end to end error rate value threshold worst is all in SMART statue Im not sure if i can trust this wd diagnostic on my crucial ssd there are alot of unknown in SMART statue too Theres no ssd diagnotic for crucial there is a firmware not sure if it helps So i downloaded and ran crystaldiskinfo on my ssd health statues says good it doesnt say end to end error rate like wd Instead same ID B line says quot unused reserve nand blocks quot instead Is my ssd good i havent ran a test on my ram yet This is almost month old build Asrock x x killer i k gtx w crucial x gb crucial gb ssd wd blue tb Heres info of bsod with bluescreenview Bug Check String- IRQL GT ZERO AT SYSTEM SERVICE Bug Check Code - x a Parameter - dc a Parameter - Parameter - Parameter - fffff b Caused By Driver- ntoskrnl exe Caused By Address- ntoskrnl exe a File Description- NT Kernel amp System

A:BSOD caused by driver (ntoskrnl.exe) /adress (ntoskrnl.exe+72a40)

Blue Screen of Death (BSOD) Posting Instructions

http://www.sevenforums.com/bsod-help-support/367819-bsod-caused-driver-ntoskrnl-exe-adress-ntoskrnl-exe-72a40.html
Relevancy 52.89%

Ok so this is the situation I've been having alot of bluescreens while playing games i used to have bluescreens with my geforce gt card and the graphics went all strange during gaming so i take it the card was failing i have replaced my motherboard cpu and graphic card since then and am still causing Harddrive ntoskrnl memory errors? and experiencing Harddrive causing ntoskrnl and memory errors? bluescreens of them blame ntoskrnl exe and one to do with my graphic card the errors are IRQL NOT LESS OR EQUAL IRQL GT ZERO AT SYSTEM SERVICE KMODE EXCEPTION NOT HANDLED SYSTEM SERVICE EXCEPTION SYSTEM THREAD EXCEPTION NOT HANDLED M Windows is installed on my C drive which is gb however all my games are installed on my E drive which is tb recently while using my tb hard Harddrive causing ntoskrnl and memory errors? drive it has made a single click sound and straight after if i open the hard drive my explorer exe freezes i thought all the bluescreens might have been caused by RAM at first but could it be possible that while im gaming the harddrive does this and bluescreens me blaming it on memory Im reformatting E at this very moment

A:Harddrive causing ntoskrnl and memory errors?

I suggest starting all troubleshooting with the following diagnostic tests. They'll save you a lot of time and heartache if there is a hardware failure, and you'll have the disks on hand in case you need them in the future:





Quote:
H/W Diagnostics:
Please start by running these bootable hardware diagnostics:
Memory Diagnostics (read the details at the link)
HD Diagnostic (read the details at the link)

Also, please run one of these free, independent online malware scans to ensure that your current protection hasn't been compromised: Free Online AntiMalware Scanners (read the details at the link)


If these tests pass, then please post this info: http://www.sevenforums.com/crashes-d...tructions.html

http://www.sevenforums.com/bsod-help-support/166465-harddrive-causing-ntoskrnl-memory-errors.html
Relevancy 52.89%

I just upgraded from Windows XP Pro to Windows Pro x last week and I am already experiencing some issues The most pressing is that I am experiencing USBPORT.SYS ntoskrnl.exe and CPU high usage causing stuttering after I have been using the computer for varying lengths of time It can occur within a few minutes of first booting the computer or it can happen within hours The time also varies depending on what I am doing either normal internet use or gaming I have updated all my chipset and ntoskrnl.exe and USBPORT.SYS causing high CPU usage hardware drivers and it was still occuring So I looked into it a bit more and found suggestions to run the xperf program to find my high CPU usage It comes up with ntoskrnl exe and USBPORT SYS as causing the highest amount of usage I also ran LatencyMon after seeing several suggestions for ntoskrnl.exe and USBPORT.SYS causing high CPU usage that program as well It also comes up with ntoskrnl exe as causing the highest amount of CPU usage Aside from updating drivers I have also tried reinstalling Windows a second time with no luck Any way to fix this issue

A:ntoskrnl.exe and USBPORT.SYS causing high CPU usage

welcome to the windows seven forums miffedmolkusk,

ntoskrnl.exe is the NT (new technology) OS Operating System KRNL (Kernel) which to use different words the "dude in charge" one way of simplifying it is.. it is windows (although that is very simplistic, it might explain why it would use the most power from the CPU. USBPORT.SYS is the main driver for USB (universal serial bus) connections, which are A.)fast and B.) supply 5volts to connected devices, so it would be another power greedy driver. So I doubt that that is unusual (the increased voltage to those two items)

did you run the windows 7 upgrade wizard to be sure your hardware can handle windows 7?

also as win7 requires more labor intensive graphics for opaque type effects, as well as 3D efx, the GPU (graphics processing unit) likely requires more power so your power supply I suppose could be right at the line, teetering back and forth between working fine and the problems.

a full sudden shutdown can also be caused by an overheated or improperly cooled CPU (lack of thermal paste, bad heat sink contact, inadequate fan cooling the CPU's heat sink, or dust caked over the grooves) It is a safety feature to prevent burning our CPU to ash! Sometimes the fan will really run fast (and loud) prior to this type of shutdown.

And I am assuming you do not overclock your system?

I'd also run a full virus scan, if the system can take it!

Hope this helps,
mike

http://www.sevenforums.com/performance-maintenance/195892-ntoskrnl-exe-usbport-sys-causing-high-cpu-usage.html
Relevancy 52.89%

um i created my own thread lasttime but what ever dont go nuts at me i only have minidump i recently ran windows debug manager with the symbols which pointed me to the driver for my razor diamodback mouse and as i recall getting a virus this virus must of infected the driver that or windows updates installed an xp or vista driver which i have seen it do before i have had no more blue screens since i deleted the old driver from windows system and installed the proper windows driver off the razer website this is purely incase i missed something and i know i could still receive a bsod or freeze as i have had kernel power errors before last one was due to an overheating cpu as the place i got my old computer made forgot to put thermal compound on the cpu so yea this is only to see what happened and to help others out there with the hideous kernel power error

A:ntoskrnl.exe causing blue screens and freezes

This .dmp file is 3 weeks old and would not provide any useful information... let us know if you are having any specific problems...

http://www.sevenforums.com/bsod-help-support/107906-ntoskrnl-exe-causing-blue-screens-freezes.html
Relevancy 52.46%

When I put my pc in sleep mode it often crashes: the screen goes normally in sleep mode, but the pc continues to stay awake for several minutes than BSOD & restart or BSOD & shut off.
Thanks to BlueScreenView I found what is seemingly the guilty process, but I don't know what to do now.
Attachment 315989
Thanks
Also, sorry for my bad english.

A:BSOD when goes sleep, ntoskrnl.exe+e96d2/ntoskrnl.exe+81e7a

Your HUAWEI Mobile Connect driver is causing issues here.


Code:
*** WARNING: Unable to verify timestamp for ew_jubusenum.sys
*** ERROR: Module load completed but symbols could not be loaded for ew_jubusenum.sys
Probably caused by : ew_jubusenum.sys
If it's a necessary driver then update it but if not then please completely remove it.
I'm not that familiar with such devices but it should be under Network Adapters, right click on the device and click properties, then click on the driver tab and update.


Code:
fffff880`015e0000 fffff880`015fc000 ew_jubusenum T (no symbols)
Loaded symbol image file: ew_jubusenum.sys
Image path: \SystemRoot\system32\DRIVERS\ew_jubusenum.sys
Image name: ew_jubusenum.sys
Timestamp: Mon Aug 20 01:55:56 2012 (50318B1C)
CheckSum: 0001CF99
ImageSize: 0001C000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

http://www.sevenforums.com/bsod-help-support/330151-bsod-when-goes-sleep-ntoskrnl-exe-e96d2-ntoskrnl-exe-81e7a.html
Relevancy 52.46%

Hi i recently built my new computer everthing was going find unti the 8/6/2010 when i started to get problems and blue screens and freezes

i tried using windows debugger to see what the issue was but i dont know the path for the symbols

anyway i will upload the mindump i hope there is nothing wrong with any hardware as i say its brand new only built this computer in june so its very new

i only recall having these issues after downloading something which contained a virus could a virus cause kernel power errors

i hope its something easily fixed and i hope anyone who hacks me dies from cancer
as i am incredibly sick of crack like this if its a microsoft issue would they please make windows 7 stronger

as i find windows 7 weak against viruses and there should never be any kernel power errors i like the days of xp when thing worked

A:ntoskrnl causing kernel power errors on brand new pc

Hi there,

Can you please follow this instruction to post your dmp, the reason is because we want more dmp to give you more definite result.
http://www.sevenforums.com/crashes-d...tructions.html

Based on the dmp that you post, it looks like your Diamondback USB Optical Mouse Driver is acting improperly, please download and install fresh copy of it.

Code:

Microsoft (R) Windows Debugger Version 6.12.0002.633 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\TUANTR~1\AppData\Local\Temp\Rar$DI00.742\080610-19281-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*e:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Machine Name:
Kernel base = 0xfffff800`02c4b000 PsLoadedModuleList = 0xfffff800`02e88e50
Debug session time: Fri Aug 6 15:58:51.259 2010 (UTC + 7:00)
System Uptime: 0 days 4:38:54.570
Loading Kernel Symbols
...............................................................
................................................................
....................................
Loading User Symbols
Loading unloaded module list
......
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1E, {ffffffffc0000047, fffff80002ce9ef8, 0, fffff88003fc13c4}

Unable to load image \SystemRoot\system32\drivers\DB3G.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for DB3G.sys
*** ERROR: Module load completed but symbols could not be loaded for DB3G.sys
Probably caused by : DB3G.sys ( DB3G+1ba3 )

Followup: MachineOwner
---------
Let us know if you need help

Tuan

http://www.sevenforums.com/bsod-help-support/107622-ntoskrnl-causing-kernel-power-errors-brand-new-pc.html
Relevancy 52.03%

Hi everybody I ve just installed an upgraded version of windows ultimate edition over my Windows XP bits Since I get daily BSOD Every time I wasn t using my computer I didn t have this problem with XP Here is the last problem signature in french Code Signature du ntoskrnl.exe Windows 7 BSOD probl me Nom d v nement du probl me BlueScreen Version du syst me Identificateur de param tres r gionaux Informations compl mentaires sur le probl me BCCode d BCP BCP FF BCP BCP E OS Version Service Pack Product ID du r cipient xD nt KiIdleLoop d Informations du serveur da c-eb - a c- ea - d d CPU Q GHz O C Memory DDR GB Mainboard Asus P Q PRO VGA Ati HD HDD Seagate Gb SATA I also attached BSOD ntoskrnl.exe Windows 7 the dump I tried to analyse them with WinDbg but I don t understand If someone can analyse them and tell me the cause of this BSOD it will be very helpful Thank you Ropiav nbsp

A:BSOD ntoskrnl.exe Windows 7

Two errors are 0xD1 and these can be caused by faulty drivers or faulty or mismatched memory. Both simply cited a Windows OS driver as the cause and OS drivers are usually too general to be of much diagnostic help.

Your third error is 0x124: WHEA_UNCORRECTABLE_ERROR and is described as "A fatal hardware error has occurred."

This error code and definition has replaced the older XP code 0x9C: MACHINE_CHECK_EXCEPTION and though it is older the definition still is applicable: This is a hardware issue: an unrecoverable hardware error has occurred. The parameters have different meanings depending on what type of CPU you have but, while diagnostic, rarely lead to a clear solution. Most commonly it results from overheating, from failed hardware (RAM, CPU, hardware bus, power supply, etc.), or from pushing hardware beyond its capabilities (e.g., overclocking a CPU).

Honestly, this is a very difficult error to work with because as it says a clear diagnosis rarely comes forth and I have never seen a minidump with either error codes give a definitive answer. I know IT techs that don't like working with it. What makes it so difficult is that it can be any hardware in your system -- and I mean any. Your dump simply cited hardware as the issue and nothing more definitive.

Here are some of the causes that were determined to be the source o 0x124/0x9C errors from posters here and abroad: NIC, DVD/CD drives, dust build up around the CPU that caused overheating of said CPU, bulging capacitors hidden by heatsink, video card, harddrive, psu, motherboard, and external harddrive connected by USB.


* Do this: Go into your BIOS and check the voltage settings for your RAM. Does it match the manufacture's voltage specs?
 

http://www.techspot.com/community/topics/bsod-ntoskrnl-exe-windows-7.148178/
Relevancy 52.03%

Hello Everyone

I bought a HP 15-ab034tx Laptop two months ago, and I have been having BSOD's since. I thought they were just because of Drivers. And thus I updated all of them. Most of the BSOD's were fixed, but not all of them. I upgraded it to Windows 10 (Clean Install) from the pre-installed Windows 8.1 Single Language. The amount of BSOD's reduced, and downgrading nVidia Graphics Card driver, also helped in reducing.
All I was left with was 1-2 BSOD's per day, which mostly were WIN8_DRIVER_FAULT.

I talked to HP Support and they sent me a Recovery Disc, as they believed it is an OS error.
I used their Disc and it installed Windows 8.1 Single Language, and on the first day it ran smoothly. Today is the second day, and I have had 4-5 BSOD's.

So, I need your help in identifying the source.
Here is the File Generated by dm_log_generator
HACK-E-STA_HP-Fri_02_12_2016_143915_65.zip

http://www.eightforums.com/bsod-crashes-debugging/73953-windows-8-1-bsods-ntoskrnl-exe-hal-dll.html
Relevancy 52.03%

I have had multiple BSODs for the past few days and the common filename between them all has been ntoskrnl.exe, they had some other drivers which i fixed but ntoskrnl.exe still causes a bsod.

I have attached a rar file to the post containing 4 dumps, I will appreciate any help to resolve this issue

Thanks

EDIT:
Forgot to mention, I have an OC'd 4.2ghz i7 3770k, I have ruled this out being an issue as I ran prime95 overnight without an issues. The BSOD tends to only happen when running games

A:Windows 7 BSOD ntoskrnl.exe

It is a Windows core OS file that is quite important but it can mean lots of things:
No boot Windows 7. Error: ntoskrnl.exe is missing or corrupt - Microsoft Community

http://www.techsupportforum.com/forums/f299/windows-7-bsod-ntoskrnl-exe-1120049.html
Relevancy 52.03%

Hello,

I have recently been checking my system for stability issues and have found that my system is unstable. I re installed windows hoping it would solve the problem to find out i still get similar problems.

Windows 7 SP1 x64.
Original OS was windows 7.
Purchased an OEM version and installed myself.
Age of hardware is nearly 1 year.
Age of latest installation is 1 day (reinstalled yesterday).

Intel core i5 3570k (stock)
Gigabyte HD7970
ASUS P8Z77-V PRO
Corsair HX750-V2

Thanks Aiid0z.

A:Windows 7 BSOD ntoskrnl.exe

Hi,

We have two bug checks:

PAGE_FAULT_IN_NONPAGED_AREA (50)

This indicates that invalid system memory has been referenced.

Bug check 0x50 usually occurs after the installation of faulty hardware or in the event of failure of installed hardware (usually related to defective RAM, be it main memory, L2 RAM cache, or video RAM).

Another common cause is the installation of a faulty system service.

Antivirus software can also trigger this error, as can a corrupted NTFS volume.

MEMORY_MANAGEMENT (1a)

This indicates that a severe memory management error occurred.

BugCheck 1A, {41284, db941001, 1975c, fffff70001080000}- The 1st parameter of the bug check is 41284 which indicates a PTE or the working set list is corrupted.

If we attempt to look at the data structure for the PFN database:

2: kd> dt nt!_MMPFN 00000000db941001
+0x000 u1 : <unnamed-tag>
+0x008 u2 : <unnamed-tag>
+0x010 PteAddress : ????
+0x010 VolatilePteAddress : ????
+0x010 Lock : ??
+0x010 PteLong : ??
+0x018 u3 : <unnamed-tag>
+0x01c UsedPageTableEntries : ??
+0x01e VaType : ??
+0x01f ViewCount : ??
+0x020 OriginalPte : _MMPTE
+0x020 AweReferenceCount : ??
+0x028 u4 : <unnamed-tag>
Memory read error ffffffffdb941021

We get a memory read error, not good!

-- PROCESS_NAME: prime95.exe

^^ Your system crashed during Prime95, with this said + the bug checks we are seeing, very likely a hardware issue.

-----------------

1. Remove and replace avast! with Microsoft Security Essentials for temporary troubleshooting purposes:

avast! removal - avast! Uninstall Utility | Download aswClear for avast! Removal

MSE - Microsoft Security Essentials - Microsoft Windows

2. AiCharger.sys is listed and loaded in your modules list which is the Asus Charger driver. Please uninstall ALL Asus software you may have installed (PC Probe, AI Suite, etc). Everything. It's all useless bloatware.

3. UltraMonUtility.sys is listed and loaded which is a driver in relation to UltraMon multi-monitor. This software's device drivers are fairly old and it is known to cause issues, so let's please remove for troubleshooting purposes. You can for now temporarily use your GPU Control Panel to set up a multi-monitor profile, but you'll just have to deal with no multi-monitor taskbar.

4. If all of the above fail to help, please run Memtest for NO LESS than ~8 passes (several hours):

Memtest86+:

Download Memtest86+ here:

Memtest86+ - Advanced Memory Diagnostic Tool

Which should I download?

You can either download the pre-compiled ISO that you would burn to a CD and then boot from the CD, or you can download the auto-installer for the USB key. What this will do is format your USB drive, make it a bootable device, and then install the necessary files. Both do the same job, it's just up to you which you choose, or which you have available (whether it's CD or USB).

How Memtest works:

Memtest86 writes a series of test patterns to most memory addresses, reads back the data written, and compares it for errors.

The default pass does 9 different tests, varying in access patterns and test data. A tenth test, bit fade, is selectable from the menu. It writes all memory with zeroes, then sleeps for 90 minutes before checking to see if bits have changed (perhaps because of refresh problems). This is repeated with all ones for a total time of 3 hours per pass.

Many chipsets can report RAM speeds and timings via SPD (Serial Presence Detect) or EPP (Enhanced Performance Profiles), and some even support changing the expected memory speed. If the expected memory speed is overclocked, Memtest86 can test that memory performance is error-free with these faster settings.

Some hardware is able to report the "PAT status" (PAT: enabled or PAT: disabled). This is a reference to Intel Performance acceleration tec... Read more

http://www.techsupportforum.com/forums/f299/windows-7-bsod-ntoskrnl-exe-784538.html
Relevancy 52.03%

Hi mates,

I'm having random bluescreens in my Windows 7 Home Premium 64 bit, specially when trying to hibernate my computer (almost always), it's a king of freeze-up followed with bluescreen. Windows is working fine, but it's just the random bluescreen keeps bugging me.

I search through the web but can't find a real answer, only that BlueScreenView from NirSoft says that the problematic driver could be ntoskrnl.exe (but don't think that's the real culprit). I think I have drivers updated.

I upload here the dump generated by SF Diagnostic Tool. There are two .dmp files (last two days crashes).

Thanks in advance for your help!

A:BSOD in regards to ntoskrnl.exe in Windows 7

Hi ninguno.

The crash dumps are not very specific about the issue, but there is a hint .....

Can you unistall MagicISO and KernSafe Total Mounter, at least as a test?

Also, free up the startup. Windows does not need any other program to auto start with it, but the auto start programs often conflicts and causes various problems including BSODs.
Click on the Start button
Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the “Startup” tab.
Deselect all items other than the antivirus and the touchpad driver, SynTPEnh.
Apply > OK
Accept then restart.
Then put the computer to sleep and wake it up. Do it a few times. Let us know how the computer is running after doing those.
____________________________________

Code:
BugCheck 1000009F, {4, 258, fffffa80036ec170, fffff80000b9c510}

Implicit thread is now fffffa80`036ec170
Probably caused by : ntkrnlmp.exe ( nt!KiSwapContext+7a )

Followup: MachineOwner
---------

http://www.sevenforums.com/bsod-help-support/333283-bsod-regards-ntoskrnl-exe-windows-7-a.html
Relevancy 52.03%

Hi I m brand new to the community but I have been reading the forum in attempt to repair my bsod My bsod are related to ntoskrnl exe I don t know what s causing it it has happened while it was on sleep mode It happened while I was playing the game League of Legends It happened while I was just browsing on the ntoskrnl.exe 8 BSOD windows internet I hope I can fix this Thanks guys Here are the specs of my laptop OS Version Microsoft Windows Pro bit Processor AMD A - M APU with Radeon tm HD Graphics BSOD windows 8 ntoskrnl.exe AMD Family Model Stepping Processor Count RAM Mb Graphics BSOD windows 8 ntoskrnl.exe Card AMD Radeon HD G Mb Hard Drives C Total - MB Free - MB Motherboard AMD Pumori Antivirus Windows Defender Disabled And here is dump file from BluescreenView Dump File - - dmp Crash Time - - AM Bug Check String APC INDEX MISMATCH Bug Check Code x Parameter fa c b Parameter Parameter fffe Parameter fffff b db Caused By Driver Null SYS Caused By Address Null SYS fbfb File Description Product Name Company File Version Processor x Crash Address ntoskrnl exe ad Stack Address Stack Address Stack Address Computer Name Full Path C WINDOWS Minidump - - dmp Processors Count Major Version Minor Version Dump File Size nbsp

Relevancy 52.03%

Hello,

I have just built a desktop a few days ago, and it has been plagued with frequent BSODs, a few a day. They happen most frequently when I am playing a game, but they have happened when I am merely browsing the internet. My computer's specs are as follows:

OS - Windows 8.1 64-bit
Motherboard - Asus Z87-A
CPU - Intel i7-4770
GPU - Nvidia Geforce GTX 770
PSU - Corsair 750M

I am fairly certain that they are caused by ntoskrnl.exe, but that is the extent of my knowledge about the problem. The contents of the "Windows 7 Vista jcgriff2" folder are attached.

Thank you

Windows7_Vista_jcgriff2.zip

A:Windows 8 BSOD ntoskrnl.exe

I have experienced quite a few more BSODs in the couple days since I last posted, and so attached is the updated folder.

http://www.techsupportforum.com/forums/f299/windows-8-bsod-ntoskrnl-exe-785626.html
Relevancy 52.03%

So random bsod. updated drivers with iobit driver updater. Kept on happening. Used bluescreen view. Said ntoskrnl.exe was the cause. Ran sfc scan now. everything wasnt fixed. Told me to look at the stuff in the cbs log. Log should be attached. I dont know what else to do. Or if ntoskrnl.exe is fixed. But thats supposed to be whats causing the crashes.
 

A:windows 8.1 bsod ntoskrnl.exe

To make sure of having a good base to start with I'd install all the latest drivers (beginning with the chipset) from the PC manufacturer's web site.
 

https://forums.techguy.org/threads/windows-8-1-bsod-ntoskrnl-exe.1128254/
Relevancy 52.03%

I windows BSOD 7 ntoskrnl.exe installed a new set of hard drives as a RAID I ve have older versions of the same hard drive e g ntoskrnl.exe windows 7 BSOD same manufacturer and size but bought earlier in the some computer also on RAID Everything was working fine until I did something stupid which I did not know was stupid at the time I changed the drive letter of the new disks to drive D my OS is on a SSD as Drive C Then shut down the computer Then added my old hard disks back which were Drive E After turning on the computer it would keep resetting during windows load I finally had to do a system restore to a previous point through the Windows installation disc Now between minutes to a few hours my computer will reboot randomly due to a blue screen I ntoskrnl.exe windows 7 BSOD did install Intel Rapid Storage from Asus website thinking ntoskrnl.exe windows 7 BSOD that would help - and it was stable longer until I got the most recent error quot KMODE EXCEPTION NOT HANDLED quot Usually I was getting the quot ATTEMPTED SWITCH FROM DPC quot Thanks in advance for your help Here are my pc specs - Asus P Z -V motherboard - i - K CPU - GB RAM - intel GB SSD as drive C and OS - x TB Seagate RPM MB cache drives in Raid as Drive D these are the new drives - x TB Seagate RPM MB cache drives in Raid as Drive E - use motherboard s onboard video card lan audio - windows -bit professional service pack I installed BlueScreenView and here is the output Dump File - - dmp Crash Time PM Bug Check String KMODE EXCEPTION NOT HANDLED Bug Check Code x e Parameter Parameter Parameter Parameter Caused By Driver iaStorV sys Caused By Address iaStorV sys b File Description Product Name Company File Version Processor x Crash Address ntoskrnl exe cd Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time PM Bug Check String ATTEMPTED SWITCH FROM DPC Bug Check Code x b Parameter fffffa ce Parameter fffffa bb Parameter Parameter Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe fc a File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win sp gdr - Processor x Crash Address ntoskrnl exe fc a Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time PM Bug Check String ATTEMPTED SWITCH FROM DPC Bug Check Code x b Parameter fffffa d Parameter fffff cc Parameter Parameter Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe fc a File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win sp gdr - Processor x Crash Address ntoskrnl exe fc a Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time AM Bug Check String ATTEMPTED SWITCH FROM DPC Bug Check Code x b Parameter fffffa d b Parameter fffff cc Parameter Parameter Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe fc a File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win sp gdr - Processor x Crash Address ntoskrnl exe fc a Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time AM Bug Check String ATTEMPTED SWITCH FROM DPC Bug Check Code x b Parameter fffffa d bb Parameter fffff cc Parameter Parameter Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe fc a File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win sp gdr - Processor x Crash Address ntoskrnl exe fc a Stack Address St... Read more

A:ntoskrnl.exe windows 7 BSOD

http://www.faultwire.com/solutions-fatal_error/A-wait-operation-attach-process-or-yield-was-0x000000B8-*1185.html

http://www.bleepingcomputer.com/forums/t/447532/ntoskrnlexe-windows-7-bsod/
Relevancy 52.03%

Hello experts i really need your help my laptop keeps crashing everytime i play my online game called battlefield heroes and yesterday it crashed while i was recording my training session using Camtasia Now this happens a lot NTOSKRNL.EXE 7 with Windows BSOD I tried to read the bluescreenview utility to view the dump but i guess im not that technical Experts i REALLY REALLY NEED YOUR HELP I have attached the dump files and here is my system information please let me know if you need anything else from God bless you all for looking for helping in advance All help is monumentally appreciated OS Name Microsoft Windows Home Premium Version Service Pack Build Other OS Description Not Available OS Manufacturer Microsoft Corporation System Name KING-PC System Manufacturer Hewlett-Packard System Model HP Pavilion dv Notebook PC System Type x -based PC Processor AMD Turion tm II Dual-Core Mobile M Mhz Core s Logical Processor s BIOS Version Date Insyde F SMBIOS Version Windows Directory C Windows System Directory C Windows system Boot Device Device HarddiskVolume Locale United States Hardware Abstraction Layer Version quot quot User Name KING-PC KING Time Zone Central Daylight Time Installed Physical Memory RAM GB Total Physical Memory GB Available Physical Memory GB Total Virtual Memory GB Available Virtual Memory GB Page File Space GB Windows 7 BSOD with NTOSKRNL.EXE Page File Windows 7 BSOD with NTOSKRNL.EXE C pagefile sys

A:Windows 7 BSOD with NTOSKRNL.EXE

Hi -

ntoskrnl.exe = the Windows NT Kernel

Run Driver Verifier - Driver Verifier - Windows 7 & Vista (BSOD-related)

Driver Verifier needs to run 24 hours minimum or until it BSODs your system, whichever is less. Then . . .

Provide full system info - Blue Screen of Death (BSOD) Posting Instructions - Windows 7 & Vista

Also, run Speccy - Speccy - System Information - Free Download
- "File" | "Publish Snapshot" | Paste URL into your next post

Regards. . .

jcgriff2

`

http://www.techsupportforum.com/forums/f299/windows-7-bsod-with-ntoskrnl-exe-591584.html
Relevancy 52.03%

Hello,

my machine is bluescreening about every 15 - 20 minutes. I am pretty certain its a driver issue as I have been running in safe mode for a couple of days now but I have no idea how to interpret the crashdumps. Whocrash keeps mentioning ntoskrnl.exe.

Anyway I have posted the PCHF tool zip file and the WhoCrash report for good measure. Any help would be greatly appreciated.

edit: since creating these reports I have re-installed windows 8 out of desperation and the problems have just gotten worse. The PC is crashing every 5 minutes now!

A:Windows 8 ntoskrnl.exe BSoD

Code:
******************************************************************************** *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 1A, {41287, 0, 0, 0}
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+33081 )
Followup: MachineOwner
---------
4: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
MEMORY_MANAGEMENT (1a)
# Any other values for parameter 1 must be individually examined.
Arguments:
Arg1: 0000000000041287, An illegal page fault occurred while holding working set synchronization.
Parameter 2 contains the referenced virtual address.
Arg2: 0000000000000000
Arg3: 0000000000000000
Arg4: 0000000000000000
Debugging Details:
------------------


BUGCHECK_STR: 0x1a_41287
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: regsvr32.exe
CURRENT_IRQL: 0
TRAP_FRAME: fffff88002f55810 -- (.trap 0xfffff88002f55810)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=fffffa8014fe2c98 rbx=0000000000000000 rcx=0000000000000360
rdx=fffffa80142b1240 rsi=0000000000000000 rdi=0000000000000000
rip=fffff801f0dbec4f rsp=fffff88002f559a0 rbp=000001cdb63175d0
r8=0000000000000000 r9=fffffa80142b1240 r10=0000000000000000
r11=0000000000000011 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei ng nz na pe nc
nt!MiEmptyPageAccessLog+0x237:
fffff801`f0dbec4f 4c8b2b mov r13,qword ptr [rbx] ds:00000000`00000000=????????????????
Resetting default scope
LAST_CONTROL_TRANSFER: from fffff801f0e738a5 to fffff801f0d04740
STACK_TEXT:
fffff880`02f556c8 fffff801`f0e738a5 : 00000000`0000001a 00000000`00041287 00000000`00000000 00000000`00000000 : nt!KeBugCheckEx
fffff880`02f556d0 fffff801`f0d021ee : 00000000`00000000 00000000`00000000 fffff801`f0f54000 fffff880`02f55810 : nt! ?? ::FNODOBFM::`string'+0x33081
fffff880`02f55810 fffff801`f0dbec4f : fffffa80`0cd82740 fffff801`f0d393c2 fffffa80`142b1240 00000000`00000000 : nt!KiPageFault+0x16e
fffff880`02f559a0 fffff801`f0d39b57 : fffffa80`14fe2000 00000000`00000001 00000003`00000000 00000000`00332dbd : nt!MiEmptyPageAccessLog+0x237
fffff880`02f55a30 fffff801`f0d3688d : fffff880`02f55b09 00000000`00000001 00000000`00000000 00000000`00000000 : nt!MiTrimOrAgeWorkingSet+0x3a0
fffff880`02f55a80 fffff801`f0d37c20 : 00000000`00000003 fffff801`f0fe2d90 00000000`00000001 00000000`00000003 : nt!MiProcessWorkingSets+0x1dd
fffff880`02f55b70 fffff801`f0d37799 : 00000000`00000002 fffff880`02f55be0 00000000`00000008 00000000`00000000 : nt!MmWorkingSetManager+0x40
fffff880`02f55ba0 fffff801`f0cac625 : fffffa80`0cd82740 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KeBalanceSetManager+0xd9
fffff880`02f55c10 fffff801`f0ceae56 : fffff880`012d1180 fffffa80`0cd82740 fffff880`012dcf40 fffffa80`0cdba040 : nt!PspSystemThreadStartup+0x59
fffff880`02f55c60 00000000`00000000 : fffff880`02f56000 fffff880`02f50000 00000000`00000000 00000000`00000000 : nt!KiStartSystemThread+0x16


STACK_COMMAND: kb
FOLLOWUP_IP:
nt! ?? ::FNODOBFM::`string'+33081
fffff801`f0e738a5 cc int 3
SYMBOL_STACK_INDEX: 1
SYMBOL_NAME: nt! ?? ::FNODOBFM::`string'+33081
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: nt
IMAGE_NAME: n... Read more

http://www.eightforums.com/bsod-crashes-debugging/14320-windows-8-ntoskrnl-exe-bsod.html
Relevancy 52.03%

Hi ntoskrnl.exe Windows 8 BSOD I've been having BSODs for about a month now Typical ntoskrnl exe I've memtested BSOD Windows 8 ntoskrnl.exe HDD tested driver verified scanned for viruses and malware updated all my windows updates ran furmark ran several sfc scannows and I've gotten no leads BUT just today I got this little error on the bottom right saying my NVIDIA driver crashed because of a memory problem and that it was restarting Like I've said I've ran driver verifier with no bsods memtest no errors etc I really think it's my GPU but I don't have the money to just buy a new GPU without knowing for sure that it's the GPU and not just drivers or BSOD Windows 8 ntoskrnl.exe something I get several game crashes and tabs on google chrome will crash sometimes also I think that may be caused by my GPU I don't know what else would cause it On a recent bsod hall dll was another service that had caused the bsod according to the bsod viewer I'm attaching my zip from the dm log collector Thanks guys

A:BSOD Windows 8 ntoskrnl.exe

Code:
ASACPI.sys Fri Nov 2 02:54:34 2012 (509327DA)
Asus ATK0110 ACPI Utility (a known BSOD maker in Win7 and Win8). Also a part of many Asus utilities (Win8 versions available from Windows Update as an Optional Update - but check Asus first!)
http://www.carrona.org/drivers/driver.php?id=ASACPI.sys

RTCore64.sys Mon Mar 11 06:32:06 2013 (513D6C56)
RivaTuner/EVGA Precision/MSI Afterburner (known BSOD issues w/Win7)
http://www.carrona.org/drivers/driver.php?id=RTCore64.sys

agp440.sys Thu Aug 22 13:39:35 2013 (5215F877)
Intel AGP Bus Filter
http://www.carrona.org/drivers/driver.php?id=agp440.sys

nv_agp.sys Thu Aug 22 13:39:38 2013 (5215F87A)
NVIDIA nForce AGP Bus Filter
http://www.carrona.org/drivers/driver.php?id=nv_agp.sys

tap0901.sys Thu Aug 22 14:40:01 2013 (521606A1)
TAP-Win32 Adapter V9 or[br]OpenVPN driver or COMODO
http://www.carrona.org/drivers/driver.php?id=tap0901.sys

Rt64win7.sys Tue Jun 17 13:59:14 2014 (53A02D92)
Realtek RTL8168D/8111D Family PCI-E Gigabit Ethernet NIC
http://www.carrona.org/drivers/driver.php?id=Rt64win7.sys

nvhda64v.sys Mon Jul 21 16:17:53 2014 (53CD2111)
nVidia HDMI Audio Device (nForce chipset driver)
http://www.carrona.org/drivers/driver.php?id=nvhda64v.sys

nvvad64v.sys Thu Sep 25 17:39:23 2014 (5424372B)
NVIDIA Virtual Audio Driver
http://www.carrona.org/drivers/driver.php?id=nvvad64v.sys

NvStreamKms.sys Sat Nov 1 00:04:56 2014 (54541598)
nVidia Streaming Kernel service - may cause BSOD in Win8.1 systems (found in May 2014). Date/TimeStamp: Tue Apr 29 20:59:44 2014 (53604B00) MAY NOT BE A PROBLEM, this is a tenative posting - Appears that April 29 driver is a problem, July 2014 drivers seem OK
http://www.carrona.org/drivers/driver.php?id=NvStreamKms.sys

nvlddmkm.sys Wed Nov 12 21:51:31 2014 (5463C853)
nVidia Video drivers
http://www.carrona.org/drivers/driver.php?id=nvlddmkm.sys

Debug session time: Thu Dec 11 18:39:10.335 2014 (UTC + 1:00)
Loading Dump File [C:\Users\Mihael\SysnativeBSODApps\121114-25500-01.dmp]
Built by: 9600.17041.amd64fre.winblue_gdr.140305-1710
System Uptime: 1 days 10:40:16.346
Probably caused by : memory_corruption ( nt!MiAgeWorkingSet+2cb )
BugCheck 50, {fffff6800066e548, 0, fffff803fd69058b, 2}
BugCheck Info: PAGE_FAULT_IN_NONPAGED_AREA (50)
Bugcheck code 00000050
Arguments:
Arg1: fffff6800066e548, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffff803fd69058b, If non-zero, the instruction address which referenced the bad memory
address.
Arg4: 0000000000000002, (reserved)
BUGCHECK_STR: AV
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: Wow-64.exe
FAILURE_BUCKET_ID: AV_nt!MiAgeWorkingSet
BiosVersion = 0801
BiosReleaseDate = 12/21/2011
SystemManufacturer = ASUSTeK Computer INC.
SystemProductName = CM1630
??????????????????????????????????????????????????????????????????????????????????????``
Debug session time: Wed Dec 10 07:52:32.001 2014 (UTC + 1:00)
Loading Dump File [C:\Users\Mihael\SysnativeBSODApps\121014-24546-01.dmp]
Built by: 9600.16422.amd64fre.winblue_gdr.131006-1505
System Uptime: 1 days 0:37:09.418
Probably caused by : win32k.sys ( win32k!NtDCompositionDiscardFrame+10e )
BugCheck 3B, {c0000005, fffff802ab0ddc9d, ffffd0002bc59160, 0}
BugCheck Info: SYSTEM_SERVICE_EXCEPTION (3b)
Bugcheck code 0000003B
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff802ab0ddc9d, Address of the instruction which caused the bugcheck
Arg3: ffffd0002bc59160, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.
BUGCHECK_STR: 0x3B
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: dwm.exe
FAILURE_BUCKET_ID: 0x3B_win32k!NtDCompositionDiscardFrame
BiosVersion = 0801
BiosReleaseDate = 12/21/2011
SystemManufacturer = ASUSTeK Computer INC.
SystemProductName = CM1630
????????????????????????????????????????????????????... Read more

http://www.eightforums.com/bsod-crashes-debugging/58376-bsod-windows-8-ntoskrnl-exe.html
Relevancy 52.03%

I recently installed Windows 8 RTM and am having tons of BSOD's. The machine is still mostly usable, though, as the errors seem to be occurring randomly. Generally, it boots fine, and plays games/other strenuous things fine. Usually the BSOD's occur when idle or when browsing in Chrome. Before I installed Windows 8, I had no problems. I installed Windows 8 to a new SSD, and this is the only hardware that's been changed. I have attached the zip file as instructed with the dump files, etc. Every BSOD lists ntoskrnl, making me think this could just be a stability problem with Win8. However, it could also be a driver issue, a problem with my SSD, or something else that I'm just not thinking of. Hopefully someone wiser than I will be able to help :P

Edit: Also, everything is at stock clocks and voltages.

A:Windows 8 BSOD - Ntoskrnl.exe?

Does anyone have any suggestions?

http://www.eightforums.com/bsod-crashes-debugging/9240-windows-8-bsod-ntoskrnl-exe.html
Relevancy 52.03%

I can't reproduce this BSOD but it happens when I am working with/closing a capture card program called AmarecTV: AmaRecTV

99% of the time it is fine using this program. I have never got a BSOD any other way (i.e. normal operation).

Specs:

i5 2500k
Gigabyte P67A-UD4
8 GB RAM
ATI 6850

I have attached the 3 BSOD dumps.

A:ntoskrnl.exe BSOD on Windows 7

Hi,

Three dumps attached, all of the PROCESS_HAS_LOCKED_PAGES (76) bugcheck. This is a device driver bug, it means that a driver is not cleaning up correctly after an I/O. Unfortunately, the 4th argument is 0 and not 1 therefore we cannot find out the guilty driver.

You can go the registry key method to make it so next time you crash, rather than a PROCESS_HAS_LOCKED_PAGES (76) bugcheck, it will be a DRIVER_LEFT_LOCKED_PAGES_IN_PROCESS (0xCB) bugcheck. For now though, I am just going to recommend taking the safer route and enable Driver Verifier:

Driver Verifier:

Quote:




What is Driver Verifier?
Driver Verifier is included in Windows 7, Windows Server 2008 R2, Windows Vista, Windows Server 2008, Windows 2000, Windows XP, and Windows Server 2003 to promote stability and reliability; you can use this tool to troubleshoot driver issues. Windows kernel-mode components can cause system corruption or system failures as a result of an improperly written driver, such as an earlier version of a Windows Driver Model (WDM) driver.
Essentially, if there's a 3rd party driver believed to be at issue, enabling Driver Verifier will help flush out the rogue driver by flagging it and causing your system to BSOD.
Before enabling Driver Verifier, it is recommended to create a System Restore Point:
Vista - START | type rstrui - create a restore point
Windows 7 - START | type create | select "Create a Restore Point"
How to enable Driver Verifier:
Start > type "verifier" without the quotes > Select the following options -
1. Select - "Create custom settings (for code developers)"
2. Select - "Select individual settings from a full list"
3. Check the following boxes -
- Special Pool
- Pool Tracking
- Force IRQL Checking
- Deadlock Detection
- Security Checks (Windows 7)
- Concurrentcy Stress Test (Windows 8)
- DDI compliance checking (Windows 8)
- Miscellaneous Checks
4. Select - "Select driver names from a list"
5. Click on the "Provider" tab. This will sort all of the drivers by the provider.
6. Check EVERY box that is NOT provided by Microsoft / Microsoft Corporation.
7. Click on Finish.
8. Restart.
Important information regarding Driver Verifier:
- If Driver Verifier finds a violation, the system will BSOD.
- After enabling Driver Verifier and restarting the system, depending on the culprit, if for example the driver is on start-up, you may not be able to get back into normal Windows because Driver Verifier will flag it, and as stated above, that will cause / force a BSOD.
If this happens, do not panic, do the following:
- Boot into Safe Mode by repeatedly tapping the F8 key during boot-up.
- Once in Safe Mode - Start > type "system restore" without the quotes.
- Choose the restore point you created earlier.
If you did not set up a restore point, do not worry, you can still disable Driver Verifier to get back into normal Windows:
- Start > Search > type "cmd" without the quotes.
- To turn off Driver Verifier, type in cmd "verifier /reset" without the quotes.
- Restart and boot into normal Windows.
How long should I keep Driver Verifier enabled for?
It varies, many experts and analysts have different recommendations. Personally, I recommend keeping it enabled for at least 36-48 hours. If you don't BSOD by then, disable Driver Verifier.
My system BSOD'd, where can I find the crash dumps?
They will be located in C:\Windows\Minidump
Any other questions can most likely be answered by this article:
http://support.microsoft.com/kb/244617





Regards,

Patrick

http://www.techsupportforum.com/forums/f299/ntoskrnl-exe-bsod-on-windows-7-a-701586.html
Relevancy 52.03%

Ey mates,
 
I've been having trouble with this machine since I built it in 2014, but I never really minded them. After fixing a lot of errors through its lifetime, I'm simply lost with the current one. The machine crashes randomly, also showing a random error name but it's always the same file: ntoskrnl.exe
 
So, after unsucessefully trying other forums for a fix, I now come to this one, hopeful to find the bloody answer. I've tried a lot of stuff, most of which I can't recall, but I'm willing to try them again if needed.
 
Minidump files

http://www.bleepingcomputer.com/forums/t/629379/ntoskrnlexe-bsod-windows-10/
Relevancy 52.03%

Hey everyone Need help with an issue I've been having since I got my new rig from 10 - ntoskrnl.exe BSOD's Windows CyberPowerPC Since I got it a couple months ago it's been getting BSOD errors at weird times mostly while playing either World of Warcraft ntoskrnl.exe BSOD's - Windows 10 or Overwatch Using WhoCrashed it's pointing me in the direction of the ntoskrnl exe every time I'm wondering if it's memory issues or what the case is One thing I do realize is that the BIOS is from but I do not feel safe updating it as again I'm not an expert Now I am no expert with computers so I am not sure where to take and look to try and solve this annoying problem Any help would be appreciated System info is below and for some reason this forum will not upload the dmp files so I'll grab what info I can from WhoCrashed OS Name Microsoft Windows Home Version Build Other OS Description Not Available OS Manufacturer Microsoft Corporation System Name DESKTOP-IMQHR N System Manufacturer Gigabyte Technology Co Ltd System Model GA- LMT-S System Type x -based PC Processor AMD FX - Quad-Core Processor Mhz Core s Logical Processor s BIOS Version Date Award Software International Inc F - - SMBIOS Version Embedded Controller Version BIOS Mode Legacy BaseBoard Manufacturer Gigabyte Technology Co Ltd BaseBoard Model Not Available BaseBoard Name Base Board Platform Role Desktop Secure Boot State Unsupported PCR Configuration Binding Not Possible Windows Directory C WINDOWS System Directory C WINDOWS system Boot Device Device HarddiskVolume Locale Canada Hardware Abstraction Layer Version Time Zone Atlantic Daylight Time Installed Physical Memory RAM GB Total Physical Memory GB Available Physical Memory GB Total Virtual Memory GB Available Virtual Memory GB Page File Space GB Page File C pagefile sys Hyper-V - VM Monitor Mode Extensions Yes Hyper-V - Second Level Address Translation Extensions Yes Hyper-V - Virtualization Enabled in Firmware No Hyper-V - Data Execution Protection Yes On Mon - - AM GMT your computer crashed crash dump file C WINDOWS Minidump - - dmp This was probably caused by the following module ntoskrnl exe nt x A B Bugcheck code x E xFFFFFFFFC xFFFFF C A F x x Error KMODE EXCEPTION NOT HANDLED file path C WINDOWS system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System Bug check description This indicates that a kernel-mode program generated an exception which the error handler did not catch This appears to be a typical software driver bug and is not likely to be caused by a hardware problem The crash took place in the Windows kernel Possibly this problem is caused by another driver that cannot be identified at this time On Mon - - AM GMT your computer crashed crash dump file C WINDOWS memory dmp This was probably caused by the following module ntkrnlmp exe nt KeBugCheckEx x Bugcheck code x E xFFFFFFFFC xFFFFF C A F x x Error KMODE EXCEPTION NOT HANDLED Bug check description This indicates that a kernel-mode program generated an exception which the error handler did not catch This appears to be a typical software driver bug and is not likely to be caused by a hardware problem The crash took place in the Windows kernel Possibly this problem is caused by another driver that cannot be identified at this time On Sat - - AM GMT your computer crashed crash dump file C WINDOWS Minidump - - dmp This was probably caused by the following module ntoskrnl exe nt x A B Bugcheck code xA x F xFF x xFFFFF D Error IRQL NOT LESS OR EQUAL file path C WINDOWS system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System Bug check description This indicates that Microsoft Windows or a kernel-mode driver accessed paged memory at DISPATCH LEVEL or above This appears to be a typical software driver bug and is not likely to be caused by a hardware problem The crash took place in the Windows kernel Possibly this problem is... Read more

http://www.bleepingcomputer.com/forums/t/629055/ntoskrnlexe-bsods-windows-10/
Relevancy 52.03%

Hi About months ago 7 BSOD Windows ntoskrnl.exe x64 i upgraded my PC with a new motherboard bundle and also Windows Ultimate x Ever since then ntoskrnl.exe Windows 7 x64 BSOD i've suffered BSOD's which seem to occur randomly only about or times a month According to my minidumps the error was always caused by ntoskrnl exe I had an awful lot of programs and applications installed in that month period so just put the problem down to a conflict there However i decided to ntoskrnl.exe Windows 7 x64 BSOD do a format of C and fresh reinstall of windows last week I haven't got round to reinstalling ALL my usual programs yet and already i have just suffered my first BSOD under this new install Any help would be greatly appreciated OS - Microsoft Windows Ultimate x Build What was original installed OS on system Microsoft Windows Ultimate x Build Is ntoskrnl.exe Windows 7 x64 BSOD the OS an OEM version came pre-installed on system or full retail version YOU purchased it from retailer Full retail version Age of system hardware Various - years Age of OS installation - have you re-installed the OS week CPU AMD Phenom II X T MHz Video Card Gigabyte ATI Radeon HD JUNIPER XT MBytes of GDDR SDRAM MotherBoard GIGABYTE GA- GM-UD H Chipset AMD RS SB SB Power Supply X-Power ATX TW System Manufacturer Self Build

A:ntoskrnl.exe Windows 7 x64 BSOD

It is difficult to do an analysis with only one .dmp file. Yours was rather inconclusive, but the memory stack revealed possible culprits.

Recommendations:Your one crash points to a DirectX/graphics card related problem. DirectX comes installed with Windows, so this may indicate Windows corruption. It may also be that you have corrupted drivers or a graphics card hardware problem.
If you are overclocking any hardware, please stop.

Run a system file check to check Windows for corruption (yes, this can occur after a fresh install if the Windows disc is faulty or programs have been installed since the fresh install of Windows): Click Start Menu
Click All Programs
Click Accessories
Right click Command Prompt
Click Run as administrator
Type
Code:
sfc /scannow
and press Enter
Once it is complete, make note of the message. If it says Windows Resource Protection did not find any integrity violations., restart your computer and post back
If the message does not say Windows Resource Protection did not find any integrity violations., restart your computer and do steps 1-6 again.
You may need to do steps 1-6 up to three times with a restart in between each run to resolve all corrupted files.
If you still have corrupted files after a fourth run, post back here with the following:Click Start Menu
Click Computer
Open your C: drive
Open Windows
Open Logs
Open CBS
Copy and paste CBS.log or CBS (it may not have the log extension) to a location you will remember.
Compress (zip) the CBS file and attach the .zip file to your next post.


Follow the steps for Diagnosing basic problems with DirectX. To re-install your display card drivers as outlined in the DirectX link, use the following steps.
Download the drivers you want for your display card(s)
Click Start Menu
Click Control Panel
Click Uninstall a program
For AMD:Uninstall AMD Catalyst Install Manager if it is listed (this should remove all AMD graphics software and drivers)
If AMD Catalyst Install Manager is not listed, use the following method to uninstall the graphics drivers (this applies to onboard graphics, as well):Click Start Menu
Right Click My Computer/Computer
Click Manage
Click Device Manager from the list on the left
Expand Display adapters
Do the following for each adapter (in case you have multiple display cards)Right click the adapter
Click Uninstall (do not click OK in the dialog box that pops up after hitting Uninstall)
Put a tick in Delete driver software for this device (if this option is available, otherwise just hit OK) and hit OK

Alternatively:Login as an adminstrative user
Click Start Menu
Click Control Panel
Click Hardware and Sound
Click Device Manager (the last link under Devices and Printers)
Expand Display adapters
Do the following for each adapter (in case you have multiple display cards)Right click the adapter
Click Uninstall (do not click OK in the dialog box that pops up after hitting Uninstall)
Put a tick in Delete driver software for this device (if this option is available, otherwise just hit OK) and hit OK

Restart your computer after uninstalling drivers for all display cards
Install the driver you selected for the display cards once Windows starts

Remember to try multiple versions of the graphics drivers, download them fresh, and install the freshly downloaded drivers.

Outdated and Problematic Drivers:You should update/replace/remove the following drivers. Any drivers that are known to cause BSODs, please remove the software or remove the drivers and then remove the device; steps to do so are given after the list of outdated drivers. If you have ASACPI.sys installed, make sure it is updated and not pre-2009; pre-2009 versions are known to cause BSODs:
ctac32k.sys Wed Jul 2 02:38:22 2008 (486B3E7E)
Creative Audio Driver
http://www.carrona.org/drivers/driver.php?id=ctac32k.sys

Rt64win7.sys Thu Feb 26 02:04:13 2009 (49A65B0D)
Realtek RTL8168D/8111D Family PCI-E Gigabit Ethernet NIC
http://www... Read more

http://www.techsupportforum.com/forums/f299/ntoskrnl-exe-windows-7-x64-bsod-681908.html
Relevancy 52.03%

OS Name Microsoft Windows 7 Ultimate
Version 6.1.7601 Service Pack 1 Build 7601
OS Manufacturer Microsoft Corporation
System Type x64-based PC
Processor AMD Phenom(tm) 9600 Quad-Core Processor, 2300 Mhz
BIOS Version/Date American Megatrends Inc. 2701, 10/8/2010
SMBIOS Version 2.5
Windows Directory C:\Windows
System Directory C:\Windows\system32
Boot Device \Device\HarddiskVolume1
Hardware Abstraction Layer Version = "6.1.7601.17514"
Installed Physical Memory (RAM) 8.00 GB
Total Physical Memory 8.00 GB
Available Physical Memory 3.34 GB
Total Virtual Memory 16.0 GB
Available Virtual Memory 11.2 GB
Page File Space 8.00 GB
Page File C:\pagefile.sys

I've been having random BSOD which don't seem to be triggered by any particular action on my behalf. I have tested all hardware and memory and it all checks out O.K.

Thank you in advance for your troubleshooting help with this matter. I'm up against a wall with this one and could use some help.

A:BSOD Windows 7 x64 --> ntoskrnl.exe

No DMPs included in upload

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

If you are overclocking STOP

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.



To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

http://www.sevenforums.com/bsod-help-support/218544-bsod-windows-7-x64-ntoskrnl-exe.html
Relevancy 52.03%

? OS - Vista/ Windows 7 ? Windows 7
? x86 (32-bit) or x64 ? x64
? What was original installed OS on system? Not sure, Windows XP I think.
? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)? Retail
? Age of system (hardware) Not sure
? Age of OS installation - have you re-installed the OS? Two weeks after last reinstall.
? CPU
? Video Card - ATI Radeon HD 4550
? MotherBoard - Zotac Intel series Motherboard G31 - Value series
? Power Supply - brand & wattage

---

It usually crashes a few minutes after I turn the computer, sometimes even twice, then my PC works fine, at least at the moment.

A:BSOD - Windows 7 - ntoskrnl.exe

Are you using a ready boost device?

One names rdyboost.sys as the system that crashed the second the ATI video driver.
There is a good possibility neither is what actually caused the crash but just happened to be the driver that saw something was wrong and called for the stop, solid state memory devices are a good place to start if you had one plugged in at the time.

Code:
**************************Tue Oct 9 11:05:20.033 2012 (UTC - 4:00)**************************

Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Owner\Bsodapps\100912-20218-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: srv*c:/symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
Machine Name:
Kernel base = 0xfffff800`02c4f000 PsLoadedModuleList = 0xfffff800`02e93670
Debug session time: Tue Oct 9 11:05:20.033 2012 (UTC - 4:00)
System Uptime: 0 days 0:01:14.673
Loading Kernel Symbols
...............................................................
................................................................
..................
Loading User Symbols
Loading unloaded module list
....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 50, {fffff88006fc4000, 1, fffff880011bc91d, 0}
Could not read faulting driver name
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : rdyboost.sys ( rdyboost!memcpy+bd )

Followup: MachineOwner
---------

0: kd> kd: Reading initial command '!analyze -v; !sysinfo cpuspeed; !sysinfo SMBIOS; lmtsmn; q'
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced. This cannot be protected by try-except,
it must be protected by a Probe. Typically the address is just plain bad or it
is pointing at freed memory.
Arguments:
Arg1: fffff88006fc4000, memory referenced.
Arg2: 0000000000000001, value 0 = read operation, 1 = write operation.
Arg3: fffff880011bc91d, If non-zero, the instruction address which referenced the bad memory
address.
Arg4: 0000000000000000, (reserved)

Debugging Details:
------------------
Could not read faulting driver name

WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff80002efd100
fffff88006fc4000

FAULTING_IP:
rdyboost!memcpy+bd
fffff880`011bc91d 488941e0 mov qword ptr [rcx-20h],rax

MM_INTERNAL_CODE: 0

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

BUGCHECK_STR: 0x50

PROCESS_NAME: System

CURRENT_IRQL: 0

TRAP_FRAME: fffff880033ec9c0 -- (.trap 0xfffff880033ec9c0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=10a9079c00000000 rbx=0000000000000000 rcx=fffff88006fc4020
rdx=000001fffc8ab000 rsi=0000000000000000 rdi=0000000000000000
rip=fffff880011bc91d rsp=fffff880033ecb58 rbp=fffff88006fc4000
r8=0000000000001000 r9=00000000000000... Read more

http://www.techsupportforum.com/forums/f299/bsod-windows-7-ntoskrnl-exe-670028.html
Relevancy 52.03%

Hello everybody.

Currently getting a BSOD related to ntoskrnl.exe..

It seems to occur randomly, though there are some events (plugging in a USB device, jostling the system in any way) that seem to spur it on more quickly.

I have run virus scans, Memtestx86, and other hardware diagnostics; everything has come back fine. I'm fairly certain it is a hardware problem however, as I have done three or four clean installs of windows to no avail. The system also crashes in safe mode.
Specs:
Asus Z97-A
Intel i7 4790k
2x 8GB Kingston Hyper-X
Nvidia GTX 560
Samsung 840 EVO (240GB)
Hitachi HDD (500GB)
Asus DVD Drive

A:Windows 7 ntoskrnl.exe BSOD

Hi jdez99.

First of all, make it sure that your SSD is having the latest firmware.
How to Upgrade Samsung SSD Firmware | StorageReview.com - Storage Reviews

And uninstall MagicISO or MagicDisc whichever you have installed.

Let us know the result upto this point.
________________________________________

Code:
BugCheck F4, {3, fffffa800ea3c8c0, fffffa800ea3cba0, fffff8000318f940}

----- ETW minidump data unavailable-----
Probably caused by : wininit.exe

Followup: MachineOwner
---------

http://www.sevenforums.com/bsod-help-support/367678-windows-7-ntoskrnl-exe-bsod.html
Relevancy 52.03%

OS WIndows 10 x64
 
Sytem built about two years ago
 
Re-installed Windows 10 about two weeks ago, similar problems before.
 
Video Card: PNY Nvidia GTX 770 2gb
 
MB: MSI H87-g43
 
Power Supply: I don't remember
 
Desktop
 
 

http://www.bleepingcomputer.com/forums/t/601506/bsod-windows-10-ntoskrnlexe/
Relevancy 52.03%

Hello!
Lately for 2 days my computer has been having the BSOD saying "ntoskrnl.exe"
It happens completely randomly.
It can be me watching a youtube video, or it can be me playing Garrysmod (On lowest settings)
I did a chkdsk /f (and then it asked me to run it when the system restores so I did and it detected no bad files)
I did a system restore before my computer has been making these errors and so far as of 20 minutes, it's still bad. It's slower, it "lags" (I was listening to music via itunes and then it started skipping for a mid-second) and some files are corrupted (such as Chrome)
And seeing how I did a system restore, the .dmp files are now gone so I cannot upload,
What are the possibilities of what's causing this?

A:bsod ntoskrnl.exe windows 7 64 bit

  
Quote: Originally Posted by LaVie


Hello!
Lately for 2 days my computer has been having the BSOD saying "ntoskrnl.exe"
It happens completely randomly.
It can be me watching a youtube video, or it can be me playing Garrysmod (On lowest settings)
I did a chkdsk /f (and then it asked me to run it when the system restores so I did and it detected no bad files)
I did a system restore before my computer has been making these errors and so far as of 20 minutes, it's still bad. It's slower, it "lags" (I was listening to music via itunes and then it started skipping for a mid-second) and some files are corrupted (such as Chrome)
And seeing how I did a system restore, the .dmp files are now gone so I cannot upload,
What are the possibilities of what's causing this?


Post it following the Blue Screen of Death (BSOD) Posting Instructions after one more BSOD.

http://www.sevenforums.com/bsod-help-support/294602-bsod-ntoskrnl-exe-windows-7-64-bit.html
Relevancy 52.03%

Hi, my Asus laptop been having bsod for almost a week. Usually it happens when I left it idle for a few minutes, can even happen on the login screen. Been searching around for the remedy , such as drive verifier, but it ends up bsod as well when enabled and I need to disable the drive verifier. Attached is a copy of dump as requested, thanks

A:Windows 8.1 BSOD ntoskrnl

Update drivers in red. Uninstall Asus Charger, physically detach any Razer hardware connected to your system as it seems to have caused BSODs. What Antivirus are you using? What Firewall software? Are you using any network monitoring software?
ATK: ASUSTeK Computer Inc. -Support- Drivers and Download ATK Package

Code:
LGBusEnum.sys Tue Nov 24 02:36:48 2009 (4B0B38B0)
Logitech Keyboard
http://www.carrona.org/drivers/driver.php?id=LGBusEnum.sys

LGVirHid.sys Tue Nov 24 02:36:48 2009 (4B0B38B0)
Logitech Gamepanel Virtual HID Device Driver
http://www.carrona.org/drivers/driver.php?id=LGVirHid.sys

atkwmiacpi64.sys Wed Sep 7 03:44:52 2011 (4E66CC94)
ATK WMIACPI Utility
http://www.carrona.org/drivers/driver.php?id=atkwmiacpi64.sys

AiCharger.sys Fri Sep 23 04:04:40 2011 (4E7BE938)
Asus Charger Driver [br] Likely BSOD cause - haven't seen recently (15Jan2013)
http://www.carrona.org/drivers/driver.php?id=AiCharger.sys

TurboB.sys Sat Jan 21 01:38:04 2012 (4F1A08EC)
Intel Turbo Boost driver
http://www.carrona.org/drivers/driver.php?id=TurboB.sys

LGSHidFilt.Sys Tue Feb 7 14:12:39 2012 (4F312347)
Logitech Gaming KMDF HID driver[br]KB or mouse
http://www.carrona.org/drivers/driver.php?id=LGSHidFilt.Sys

GEARAspiWDM.sys Thu May 3 21:56:17 2012 (4FA2E2E1)
CD-ROM Class Filter Driver by Gear Software.[br]Also comes with iTunes
http://www.carrona.org/drivers/driver.php?id=GEARAspiWDM.sys

iaStorA.sys Mon Jul 9 22:42:33 2012 (4FFB4239)
Intel RST (Rapid Storage Technology) driver
http://www.carrona.org/drivers/driver.php?id=iaStorA.sys

dump_iaStorA.sys Mon Jul 9 22:42:33 2012 (4FFB4239)
driver created to provide disk access during crash dump file generation
http://www.carrona.org/drivers/driver.php?id=dump_iaStorA.sys

RTKVHD64.sys Tue Jul 10 12:25:21 2012 (4FFC0311)
Realtek High Definition Audio Function Driver
http://www.carrona.org/drivers/driver.php?id=RTKVHD64.sys

kbfiltr.sys Thu Aug 2 05:22:22 2012 (5019F26E)

kbfiltr.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

AMPPAL.sys Thu Sep 13 13:30:17 2012 (5051C3C9)
Intel? Centrino? Bluetooth 3.0 + High Speed Virtual Adapter driver
http://www.carrona.org/drivers/driver.php?id=AMPPAL.sys

usb3Hub.sys Wed Sep 26 13:04:00 2012 (5062E120)

usb3Hub.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

XHCIPort.sys Wed Sep 26 13:04:01 2012 (5062E121)
Intel USB-IF xHCI USB Host Controller/Intel Wireless Display Driver
http://www.carrona.org/drivers/driver.php?id=XHCIPort.sys

AsusTP.sys Mon Oct 29 19:23:54 2012 (508EC9BA)
Asis transformer pad filter driver
http://www.carrona.org/drivers/driver.php?id=AsusTP.sys

HWiNFO64A.SYS Wed Nov 14 12:15:59 2012 (50A37D6F)
HWiNFO32 Kernel Driver
http://www.carrona.org/drivers/driver.php?id=HWiNFO64A.SYS

HECIx64.sys Mon Dec 17 20:32:21 2012 (50CF7345)
Intel Management Engine Interface
http://www.carrona.org/drivers/driver.php?id=HECIx64.sys

ew_jubusenum.sys Mon Mar 4 09:32:48 2013 (51345C30)
HUAWEI Mobile Connect - Bus Enumerate Device
http://www.carrona.org/drivers/driver.php?id=ew_jubusenum.sys

L1C63x64.sys Mon Apr 1 05:15:17 2013 (5158FBC5)
Qualcomm Atheros AR8151 PCI-E Gigabit Ethernet Controller (NDIS 6.30)
http://www.carrona.org/drivers/driver.php?id=L1C63x64.sys

iBtFltCoex.sys Thu Apr 18 16:17:24 2013 (51700074)
Intel Centrino Wireless (Bluetooth Adapter driver
http://www.carrona.org/drivers/driver.php?id=iBtFltCoex.sys

btmaux.sys Mon Jul 22 16:19:46 2013 (51ED3F82)
Intel Bluetooth Auxiliary Service
http://www.carrona.org/drivers/driver.php?id=btmaux.sys

iwdbus.sys Thu Jul 25 03:06:12 2013 (51F07A04)
Intel WIDI Bus Enumerator driver[br]Related to Intel Widi - Wireless Display
http://www.carrona.org/drivers/driver.php?id=iwdbus.sys

intelppm.sys Thu Aug 22 10:46:35 20... Read more

http://www.eightforums.com/bsod-crashes-debugging/61776-windows-8-1-bsod-ntoskrnl.html
Relevancy 52.03%

Hello, I have been receiving BSODs recently. It comes up many times a day. Here is the latest Dump file. Also when I tried performing perfmon /report I get an error. It says "An error occurec while attempting to generate the report." Then below that it says The system cannot find the path specified.

A:ntoskrnl.exe Windows 7 BSOD

  
Quote: Originally Posted by rsxownes


Hello, I have been receiving BSODs recently. It comes up many times a day. Here is the latest Dump file. Also when I tried performing perfmon /report I get an error. It says "An error occurec while attempting to generate the report." Then below that it says The system cannot find the path specified.




First remove sptd.sys, used in daemon tools and alcohol120 the alwasy cause BSOD's

Please remove any CD virtualization programs such as Daemon Tools and Alcohol 120%. They use a driver, found in your dmp, sptd.sys, that is notorious for causing BSODs. Use this SPTD uninstaller when you're done: DuplexSecure - Downloads
[/quote]
You can use MagicDisc as an alternative.

Freeware MagicISO Virtual CD/DVD-ROM(MagicDisc) Overview

http://www.sevenforums.com/bsod-help-support/126508-ntoskrnl-exe-windows-7-bsod.html
Relevancy 52.03%

Hey guys

Have just bought a second hand machine and have done a fresh install about 2 weeks ago.

Since then I have been getting BSOD crashes - ive been searching online for awhile on how to repair my errors, but still no solution

Have attached the necessary files (I hope)

Hope someone can help

A:Windows 7 BSOD x64 - ntoskrnl.exe

Please perform the following:

1. Download and save this tool to your desktop:
http://go.microsoft.com/fwlink/?linkid=52012

2. Run the tool, and then click Copy - ignore any errors if they appear

3. Use CTRL+V to paste the unedited results of the tool here in your next reply

http://www.sevenforums.com/bsod-help-support/300730-windows-7-bsod-x64-ntoskrnl-exe.html
Relevancy 51.6%

I keep getting a BSOD (Critical_Object_Termination) but have no idea what is causing the issue. I tried in vain to debug my own minidump files but ended up getting nowhere.

So far i have run MemTest over the weekend with 107 passes. I also ran Prime95 64-bit for 4 hours on each of the FFT tests without error.

I have enabled driver verifier (following the guide on this site) and this has not caused anynew BSOD's.

I also get a random BSOD on startup but it has happened so infrequently i have been unable to boot with disable automatic restart on system failure enabled to capture the stop code.

I really could do with some expert advice please.

This is my first post so i apologise if i have missed something important but i have tried to read as much info as possible before posting.

A:BSOD Ntoskrnl.exe+7efc0 and Ntoskrnl.exe+75c40

Unusual one you got there think it may be a windows problem please run sf tool and upload all files not just dumps and try running an sfc scan
SFC /SCANNOW Command - System File Checker option 2

Check system temperatures also

http://www.sevenforums.com/bsod-help-support/281212-bsod-ntoskrnl-exe-7efc0-ntoskrnl-exe-75c40.html
Relevancy 51.6%

Does anyone have any idea what could be causing these BSOD errors? It started with the +74200 error about a month ago (enduser is just now informing IT) and now it is the +73c40. I've already done several Memory tests to no avail. I'm about to just
reimage but don't want to if it's just a driver issue. 

Thanks
TravisD

https://social.technet.microsoft.com/Forums/en-US/afea0b11-7904-4025-8dd6-c76d6cfa02d8/ntoskrnlexe74200-amp-ntoskrnlexe73c40-bsod?forum=w8itprogeneral
Relevancy 51.6%

i am having this problem after i change my video cards i upgraded a 460 SLI to a 680
i have run 3dmark11 to try to replicate the bsod or something and nothing happends
i clean my hardware and change the thermal compound then i played some bf3 and paff the same bsod =(

pd: sorry for my english
i forgot to say that i have the last beta drivers from nvidia because with the WHQL i was having problems in gw2
Attachment 231326

A:BSOD playing bf3, hal.dll hal.dll+12a3b , ntoskrnl.exe ntoskrnl.exe+18

Welcome

For the bug check you're getting go through:
Stop 0x124 - what it means and what to try

Also get a latest version of your BIOS.


Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Yusra\Downloads\Fayer\SF_11-09-2012\091112-23509-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
Machine Name:
Kernel base = 0xfffff800`03667000 PsLoadedModuleList = 0xfffff800`038ab670
Debug session time: Wed Sep 12 06:29:05.072 2012 (UTC + 6:00)
System Uptime: 0 days 7:04:57.025
Loading Kernel Symbols
...............................................................
................................................................
................................
Loading User Symbols
Loading unloaded module list
.....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 124, {0, fffffa80086cf028, ba000000, 400405}

*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : hardware

Followup: MachineOwner
---------

5: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa80086cf028, Address of the WHEA_ERROR_RECORD structure.
Arg3: 00000000ba000000, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000000400405, Low order 32-bits of the MCi_STATUS value.

Debugging Details:
------------------
BUGCHECK_STR: 0x124_GenuineIntel

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

PROCESS_NAME: System

CURRENT_IRQL: f

STACK_TEXT:
fffff880`030acb58 fffff800`03630a3b : 00000000`00000124 00000000`00000000 fffffa80`086cf028 00000000`ba000000 : nt!KeBugCheckEx
fffff880`030acb60 fffff800`037f3b03 : 00000000`00000001 fffffa80`0860b890 00000000`00000000 fffffa80`0860b8e0 : hal!HalBugCheckSystem+0x1e3
fffff880`030acba0 fffff800`03630700 : 00000000`00000728 fffffa80`0860b890 fffff880`030acf30 fffff880`030acf00 : nt!WheaReportHwError+0x263
fffff880`030acc00 fffff800`03630052 : fffffa80`0860b890 fffff880`030acf30 fffffa80`0860b890 00000000`00000000 : hal!HalpMcaReportError+0x4c
fffff880`030acd50 fffff800`0362ff0d : 00000000`00000008 00000000`00000001 fffff880`030acfb0 00000000`00000000 : hal!HalpMceHandler+0x9e
fffff880`030acd90 fffff800`03623e88 : 0000003b`5e9a7a72 fffffa80`0ae15ac8 00000000`00000000 00000000`00000000 : hal!HalpMceHandlerWithRendezvous+0x55
fffff880`030acdc0 fffff800`036e4aac : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : hal!HalHandleMcheck+0x40
fffff880`030acdf0 fffff800`036e4913 : 00000000`00000000 00000... Read more

http://www.sevenforums.com/bsod-help-support/252352-bsod-playing-bf3-hal-dll-hal-dll-12a3b-ntoskrnl-exe-ntoskrnl-exe-18-a.html
Relevancy 51.6%

Hi there,

Recently I've been getting BSOD while playing WoW. I'm not sure what details to give other than the dump so I'll just tell you about my computer:

Intel i5 4690 3.5-3.9 GHZ
EVGA GTX 970 SSC (super superclocked - the fans are designed not to turn on until card reaches 60c)
16gb Hyper X Fury ram
1tb WD Black HDD
Windows 7 OS

I noticed that I haven't crashed yet while EVGA Precision X is up (it has a custom aggressive fan curve I made). Maybe this has to do with the fact that it replaces fan drivers, or something? I don't know. I'm pretty clueless as to what's going on because all these parts are pretty new and it only recently started, but it's crashed three times today. Here are the dumps.
Any help you guys can give would be greatly greatly appreciated. Thanks a ton!
 

A:BSOD ntoskrnl.exe address ntoskrnl.exe+74ec0

Any ideas? It happened again while using EVGA Precision.
 

https://forums.techguy.org/threads/bsod-ntoskrnl-exe-address-ntoskrnl-exe-74ec0.1145229/
Relevancy 51.6%

Hello Recently I got a few bluescreens while playing World of Warcraft which I thought was very weird because all of my hardware is pretty new Here is some info about my computer Intel i - GHZ EVGA GTX SSC super superclocked - the fans are designed not to turn on until card reaches c gb Hyper X Fury ram tb WD Black HDD Windows OS At first I noticed three bluescreens then I used EVGA Precision X with a custom aggressive fan profile and BSOD ntoskrnl.exe+74ec0 ntoskrnl.exe address the problem went away temporarily but then the computer crashed later on I'm not sure if that's relevant or not I ran a diagnostic on my harddrive and processor and both were fine The RAM seems more difficult to test because it said something about usb drives so I decied to stray away from that unless it was absolutely necessary and then get help from someone who BSOD ntoskrnl.exe address ntoskrnl.exe+74ec0 knows what they're doing I am going to upload the dump files that were saved by bluescreenview Any help at all would be greatly appreciated

A:BSOD ntoskrnl.exe address ntoskrnl.exe+74ec0

CRITICAL_OBJECT_TERMINATION BSODs (0xf4) are usually related to an issue with the hard drive.

If you have an SSD, make sure that the firmware is upgraded.

If HDD, run SeaTools for DOS, LONG test - Hard Drive (HDD) Diagnostics - Sysnative Forums

Regards. . .

jcgriff2

`

http://www.techsupportforum.com/forums/f299/bsod-ntoskrnl-exe-address-ntoskrnl-exe-74ec0-975273.html
Relevancy 51.6%

Hi, I've been having this BSOD appear very randomly.

IRQL_NOT_LESS_OR_EQUAL 0x0000000a
(all reports in .rar file)

Sometimes within 1 hour, other times as long as 24hrs+. I've got my BIOS/Drivers up to date for my CPU, Graphics Card, and Motherboard. I've rigorously tested my memory and have never had any issues arise.

It has occurred during
3d gaming,
when the system has been idle,
also when browsing with firefox or ie.

Any help at all would be appreciated, I've struggled with this BSOD for years I would love to finally find whats causing it.

Thank you.

A:BSOD ntoskrnl.exe+26ee0 ntoskrnl.exe+7cc40

  
Quote: Originally Posted by postal


Hi, I've been having this BSOD appear very randomly.

IRQL_NOT_LESS_OR_EQUAL 0x0000000a
(all reports in .rar file)

Sometimes within 1 hour, other times as long as 24hrs+. I've got my BIOS/Drivers up to date for my CPU, Graphics Card, and Motherboard. I've rigorously tested my memory and have never had any issues arise.

It has occurred during
3d gaming,
when the system has been idle,
also when browsing with firefox or ie.

Any help at all would be appreciated, I've struggled with this BSOD for years I would love to finally find whats causing it.

Thank you.


First lets start with asacpi.sys yours dated 2005
1-ASACPI.SYS

The pre 2009 version of this driver is a known BSOD cause.

Please visit this link: ASUS teK Computer Inc. -Support- Drivers and Download P7P55D LE
ASUSTeK Computer Inc. -Support- Drivers and Download P7P55D LE

Scroll down to the Utilities category, then scroll down to the "ATK0110 driver for WindowsXP/Vista/Windows 7 32&64-bit" (it's about the 12th item down).
Download and install it.
Go to C:\Windows\System32\drivers to check and make sure that the ASACPI.SYS file is date stamped from 2009 or 2010 (NOT 2005).

http://www.sevenforums.com/bsod-help-support/194256-bsod-ntoskrnl-exe-26ee0-ntoskrnl-exe-7cc40.html
Relevancy 51.6%

Hello,
I've been having trouble identifying a solid fix on the exact issue. I've done a memory check and no problems or errors were found. My first assumption was either Video or Memory related and I have been updating old drivers and still currently running checks.
I will attach the dmp files as I'm not sure how to exactly resolve the issue to prevent the same BSOD or further system failures. Perhaps there's a better explanation for this?
Specs:
Windows 7 SP 1 x64
AMD Athlon II x4 630 2.80 Ghz

8 GB DD3 Ram
Geforce GTX 750

.dmp files
https://www.mediafire.com/?qu0pdlhklz7p03b

https://social.technet.microsoft.com/Forums/en-US/dfea1307-d924-4ced-b4e4-6e34da88bd11/bsod-windows-7-various-crashes-from-ntoskrnl?forum=w7itprogeneral
Relevancy 51.6%

9 days ago I updated windows, the updated looked very similar to the windows 8.1 to windows 10 (windows cumulative update). This update brought some problems with it. Since the update I have had lots of BSOD. Never before I had one blue screen. Now it looks like I am collecting them, as this damn BSOD: ntoskrnl.exe+162285 I have counted this BSOD 8 times.

I tried to fix this issue myself by updating drivers and stuff and looking over the internet. I am not able to find the problem. I am hoping the masters of TenForums can help me. I have attached the file as suggested by the forum: LUKE-di_15-12-2015_231057_70.zip.

As a little question from myself, how do you find the exact corrupted driver/problem in all those files?

I hope to here soon from the people from TenForums.

Best regards,

Luke

A:BSOD since Windows update (ntoskrnl 8x)

Please remove / disable items from the startup in taskmanager
These programs could interfere with the boot process giving you trouble and increase the boot time.

Please uninstall G Data Internet Security, choose AVCleaner in the link below
Downloads - G DATA Software AG

Code:
*** WARNING: Unable to verify timestamp for GDBehave.sys
*** ERROR: Module load completed but symbols could not be loaded for GDBehave.sys

http://www.tenforums.com/bsod-crashes-debugging/33964-bsod-since-windows-update-ntoskrnl-8x.html
Relevancy 51.6%

Hi, I'm on a new build and have been getting random BSOD. I don't know exactly when it happens but it has happened a few times while browsing the internet on firefox.

I don't know what's causing these random BSOD. In BlueScreenView I can see about 6 crashes were caused by ntoskrnl.exe and one crash also had volmgrx.sys listed in it.

I attached the dump files so maybe you can help me figure this out. I'm using Windows 7 Ultimate 64 bit.

Thank you.

A:Getting random BSOD on Windows 7 (ntoskrnl.exe)

Several of these show a disk controller error Lets start with a chkdsk.

Disk Check

http://www.sevenforums.com/bsod-help-support/228977-getting-random-bsod-windows-7-ntoskrnl-exe.html
Relevancy 51.6%

I have a Toshiba A that I upgraded from Vista -bit system to Windows -bit over a year ago I've had a few BSOD's here amp there but nothing all the time til recently Everything works fine except when the computer tries to go to sleep It will sit there for minutes until it times out and then the BSOD will appear and it 64-Bit ntoskrnl.exe 7 to when Windows sleep trying BSOD will shut down I have formatted my hard drive and reinstalled vista on my computer several times and then upgraded to windows each time adding all the components one at a time trying to narrow down which one is screwing everything up When I first install vista and upgrade to Windows 7 64-Bit ntoskrnl.exe BSOD when trying to sleep windows the Windows 7 64-Bit ntoskrnl.exe BSOD when trying to sleep sleep function works fine but after I install all my software it glitches I have tried installing the software and updates one at a time to figure out what it wrong but it seems that it happens at different times each time so I have been unable to figure out what is the problem I have attached my dump files Help is much needed and appreciated

A:Windows 7 64-Bit ntoskrnl.exe BSOD when trying to sleep

Welcome your problem seems to be an hp printer driver
usbscan.sys
First make a full anti virus scan
Download and make a full scan with malwarebytes.
Sometimes virus take names of drivers in an attempt to stay hidden
If negative,
Go to the hp site and update driver.

http://www.sevenforums.com/bsod-help-support/249309-windows-7-64-bit-ntoskrnl-exe-bsod-when-trying-sleep.html
Relevancy 51.6%

Welcome everyone, welcome forum

Some time ago I installed a fresh Windows and now the BSOD just happened.
I was listening to the music @Creative Media player and checking out internet @Chrome.

Hoping for help guys

A:Recently BSOD on a new Windows // ntoskrnl.exe

The dump gave the cause as a 124 error, 0x124's are typically related to a hardware issue and can only be isolated by stress testing the major components.

If overclocking, reset all overclocks back to their default settings and then follow these:
RAM - run for a minimum of 8 consecutive passes
RAM - Test with Memtest86+
CPU - run the HIGH test
CPU - Stress Test Using IntelBurnTest
Video - run the FURMARK test for 20mins
Graphics Card Problems - Diagnose
Video Card - Stress Test with Furmark
Storage - run the SHORT test using the DOS version
SeaTools for DOS and Windows - How to Use


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 124, {0, fffffa8004aad038, b6000000, 10015}
Probably caused by : AuthenticAMD
Followup: MachineOwner
---------

http://www.sevenforums.com/bsod-help-support/368556-recently-bsod-new-windows-ntoskrnl-exe.html
Relevancy 51.6%

Hello, in 2014 i had 7 BSOD's all happened when i was browsing the web. I did looked in google about halmacpi.dll and ntoskrnl.exe and did as some people suggested. I've run my antivirus and checked HDD, both programs passed the test. Strange is that blue screen in header have big smiley face (which i've never seen before in BSOD) and later in text writes that it's gathering some information about crash with progress bar from 0% to 100%
Update:
Today i've reformated HDD and installed fresh copy of Windows 8. When windows tried to install antivirus 2 times in a row i received 2 BSOD with same sad smiley face and in bottom text REFERENCE_BY_POINTER

A:BSOD halmacpi.dll and ntoskrnl.exe WINDOWS 8

Hi,

The machine is a mess.

It also has rootkit software.

Use Killdisk on the hard drive to wipe it, then install Windows.

Do not install Daemon Tools. Use PowerISO instead.

Update all drivers from manufacturers' websites.

Change passwords to all of your machines and all websites.

Disable the modem if you do not use it.

Enjoy.

http://www.eightforums.com/bsod-crashes-debugging/41457-bsod-halmacpi-dll-ntoskrnl-exe-windows-8-a.html
Relevancy 51.6%

It seems i can't found my problem solutions, Help me pls thx

Files Attached

A:Windows 7 : cdd.dll , ntoskrnl.exe , win32k.sys BSOD

What steps have you taken to solve it?

http://www.sevenforums.com/bsod-help-support/319082-windows-7-cdd-dll-ntoskrnl-exe-win32k-sys-bsod.html
Relevancy 51.6%

Hi I really am frustrated with my pc I keep getting BSOD and Phed.dll 64 Windows Ntoskrnl.exe BSOD & bit 7 even bought new ram recently as well as a new hard disk I know it's not my hardisk or my windows installation because I get the error on multiple installations My mainboard is decent and current so I don't really know what to make of these blue screens One thing that is always there is BSOD Windows 7 64 bit Phed.dll & Ntoskrnl.exe the ntoskrnl exe file and the pshed dll I have pasted them below Thank you for any help you can give I have run all diagnostics on memory and scannow chkdsk dxdiag memtest Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode a BCP BCP FFFFFA BCP FFFFFA FD BCP OS Version Service Pack Product - - dmp AM MEMORY MANAGEMENT x a fffffa fffffa fd ntoskrnl exe ntoskrnl exe NT Kernel amp System Microsoft Windows Operating System Microsoft Corporation win gdr - x C Windows Minidump - - dmp - - dmp AM UNEXPECTED KERNEL MODE TRAP x f f fffff b nvlddmkm sys nvlddmkm sys b x C Windows Minidump - - dmp - - dmp PM KMODE EXCEPTION NOT HANDLED x e dxgmms sys dxgmms sys e x C Windows Minidump - - dmp - - dmp AM BAD POOL HEADER x fffff c fffff c win k sys win k sys f x C Windows Minidump - - dmp - - dmp PM SYSTEM THREAD EXCEPTION NOT HANDLED x e ffffffff c fffff bb cd fffff ff fffff ff ec dxgmms sys dxgmms sys cb x C Windows Minidump - - dmp - - dmp PM UNEXPECTED KERNEL MODE TRAP x f f fffff a a ntoskrnl exe ntoskrnl exe NT Kernel amp System Microsoft Windows Operating System Microsoft Corporation win gdr - x C Windows Minidump - - dmp

A:BSOD Windows 7 64 bit Phed.dll & Ntoskrnl.exe

Welcome!

Please follow these directions: http://www.sevenforums.com/crashes-d...tructions.html

Thanks,
~JK

http://www.sevenforums.com/bsod-help-support/103108-bsod-windows-7-64-bit-phed-dll-ntoskrnl-exe.html
Relevancy 51.6%

I've been having these crashes randomly over the last few months. The only hardware I've added was a Plantronics wireless headset but the USB part wasn't even plugged in this morning when the computer crashed. I ran Memtestx86 and saw no errors. The actual error is PAGE_FAULT_IN_NONPAGED_AREA. Here is the system config.

? OS - Vista/ Windows 7 ? Windows 7
? x86 (32-bit) or x64 ? x64
? What was original installed OS on system? Windows 7
? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)? OEM
? Age of system (hardware) 9 months
? Age of OS installation - have you re-installed the OS? 9 months - no
? CPU Intel Core2 Q8400 2.66GHz
? Video Card nVidia GeForce 8600GT
? MotherBoard HP 8000 Elite PC (factory m/b)
? Power Supply - brand & wattage factory p/s

Any help would be greatly appreciated!

A:Windows 7 BSOD ntoskrnl.exe+70740

Hello,

It seems File Access Manager is causing the problem. Try uninstalling it, see if that does the trick.

...Summary of the dumps:

Code:

Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Fri Feb 18 11:45:01.539 2011 (UTC - 5:00)
System Uptime: 6 days 22:34:11.069
*** WARNING: Unable to verify timestamp for FAMv4.sys
*** ERROR: Module load completed but symbols could not be loaded for FAMv4.sys
Probably caused by : FAMv4.sys ( FAMv4+1a06c )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x50
PROCESS_NAME: explorer.exe
FAILURE_BUCKET_ID: X64_0x50_FAMv4+1a06c
SystemProductName = HP Compaq 8000 Elite CMT PC
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Fri Feb 11 13:09:45.643 2011 (UTC - 5:00)
System Uptime: 2 days 0:34:54.782
*** WARNING: Unable to verify timestamp for FAMv4.sys
*** ERROR: Module load completed but symbols could not be loaded for FAMv4.sys
Probably caused by : FAMv4.sys ( FAMv4+1a06c )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x50
PROCESS_NAME: explorer.exe
FAILURE_BUCKET_ID: X64_0x50_FAMv4+1a06c
SystemProductName = HP Compaq 8000 Elite CMT PC
??????????????????????????????????????????????????????????????????????????????????????``

http://www.techsupportforum.com/forums/f299/windows-7-bsod-ntoskrnl-exe-70740-a-552462.html
Relevancy 51.6%

Hi guys,

My case is same as Ervin but we not a same person

I wish someone can help me find out the problem

You may download my dump file from attachment.

Thank you.

A:Windows 7 - win32k.sys+ntoskrnl.exe BSOD

  
Quote: Originally Posted by Vinz


Hi guys,

My case is same as Ervin but we not a same person

I wish someone can help me find out the problem

You may download my dump file from attachment.

Thank you.


Only thing that is obvious it this

Please remove any CD visualization programs such as Daemon Tools and Alcohol 120%.

They use a driver, found in your dmp, called sptd.sys, that is notorious for causing BSODs.

Use this SPTD uninstaller DuplexSecure - Downloads DuplexSecure - FAQ

when you're done you can use this Freeware:

MagicISO Virtual CD/DVD-ROM (MagicDisc) in its place

Using MagicISO to create ISO image files

http://www.sevenforums.com/bsod-help-support/199911-windows-7-win32k-sys-ntoskrnl-exe-bsod.html
Relevancy 51.6%

OK so recently my computer started not being able to start up on BSOD (ntoskrnl) Windows bit 7 64 Strange it would Strange BSOD on Windows 7 64 bit (ntoskrnl) get into the windows logo screen and then crash To solve this problem I copmletely restored the system to factory settings then installed all the stuff I had before like drivers updates games eetc However I just got a blue screen error which I also used to get infrequently before I completely reinstalled the OS Office etc Here it is Dump File - - dmp Crash Time PM Bug Check String SYSTEM THREAD EXCEPTION NOT HANDLED Bug Check Code x e Parameter ffffffff c Parameter fffff a b b Parameter fffff f Parameter fffff f b Caused by Driver ntoskrnl exe Caused by Address ntoskrnl exe d b File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win gdr - Processor x Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Can someone please help I m not sure what it causing this and I m desperate now as I have no idea how to fix it Any help would be very much appreciated nbsp

A:Strange BSOD on Windows 7 64 bit (ntoskrnl)

Welcome!

Could you please upload some info for us? At the very least, we need the memory dumps.



JK said:



Go to C:\Windows\Minidump and copy all of the dmp files to the desktop. Select all>right-click on one>Send to>New Compressed folder. Then attach the zip file to your next post by use of the paperclip icon in the advanced editor.Click to expand...

I, and several others, prefer to work with a full BSOD report though. If you wouldn't mind, could you follow these directions instead?

http://www.jcgriff2.com/BSODpostinstructions.html

That collects event logs, Windows Error Reporting, driver listings, system info, and other info, as well as the minidumps. So if you choose to use this, don't bother uploading dumps.

Zip up the output folder the jcgriff2 scripts create, and upload it to Rapidshare or a similar site.
 

http://www.techspot.com/community/topics/strange-bsod-on-windows-7-64-bit-ntoskrnl.155870/
Relevancy 51.6%

I've occassionally be getting BSOD (either 01a or 0d1) but these are happening more frequently and I know something is wrong. I have attached my logs from SF_Diagnostic_Tool.exe to this post, as well as a screenshot from WhoCrashed, BlueScreenView, CPUZ and Intel Driver Update Utility. From research, this seems to be a driver issue, and related to networking or my Internet connection. Not always but often, ntoskrnl.exe is mentioned on the BSOD.

I have updated my USB wireless dongle drivers, my onboard NIC too, as well as running The Intel? Driver Update Utility and Windows Update. I have also uninstalled Networx (which is known to cause this problem) and I've ran a full chkdsk and used the memory diagnostic program in Windows.

Usually I am web browsing or using an Adobe application like Lightroom or Photoshop but this has happened when I have been gaming too.

Any ideas?

A:Ntoskrnl.exe 0d1 and 01a BSOD Windows 7 (64bit)

In addition to using the memory diagnostic in windows; i would download, and run memtest86; and run several passes through that to double check to make sure there are no errors. Below is the link to that:

MemTest86 - Download now!

http://www.sevenforums.com/bsod-help-support/319696-ntoskrnl-exe-0d1-01a-bsod-windows-7-64bit.html
Relevancy 51.6%

I'm not sure how or why. but the only thing that i can think of that i recently installed was the updates that i just got. i can't find which ones they were but they were the latest four security updates. i will attach the files below any help would be amazing. ty in advanced for your time. also when i tried to do the prefmon /report command it gave me a file path error so i saved the data collector sets and reports in there as texts cause that's all i could to to get those files.

my system is
Windows 7 ultimate x64 SP1
This system was built within the past 6 months
and this is a custom system built by myself. so i believe i have an OEM copy of windows on here. and this install is less than 6 months old

A:Windows 7 Ultimate x64 ntoskrnl.exe BSOD

  
Quote: Originally Posted by Vexx109


I'm not sure how or why. but the only thing that i can think of that i recently installed was the updates that i just got. i can't find which ones they were but they were the latest four security updates. i will attach the minidump files below any help would be amazing. ty in advanced for your time



Virtually all (I couldnt resist) of these were Related to VBoxNetFlt.sys VirtualBox Host Interface Networking Driver from Sun Microsystems, Inc.

I would remove it at least to test.

Also of note. These do can and do cause BSOD's

Related to GVTDrv64.sys Easy Tune 6 from Gigabyte - known issues w/Win7) Remove it, as it isnt necessary.

Your AVG which is often at least a contributing cause of BSOD'S shouild be remove . Please remove and replace your AVG with Microsoft Security Essentials AT LEAST TO TEST

Download tools and utilities | AVG Worldwide

Microsoft Security Essentials - Free Antivirus for Windows

http://www.sevenforums.com/bsod-help-support/209090-windows-7-ultimate-x64-ntoskrnl-exe-bsod.html
Relevancy 51.6%

Hey,

Recently I started getting some really annoying BSOD that crashes my system every time I exit a video game. It occurs the exact moment I end the process.

I tried to investigate what is causing that, but no success so far. I ran memtest86+ (passed), CHKDSK (no errors), sfc /scannow (found no errors), and reinstalled my video card drivers. I even uninstalled all of my Anti-spyware programs besides MSE to see if it's the cause, but none of these seems to be the cause.

BSOD started happening the day after I ran CHKDSK, not sure it's the cause though.
Pictures and CHKDSK log included.

I'm on the edge of just formatting my PC because of this issue, is it my hard drive? is it my windows files? I have no idea anymore. Please help me solve this very frustrating BSOD, Thanks.

*Added genuine report

Relevancy 51.6%

Hi there I've had a serious problem of BSOD since I first installed Windows x and x on this laptop a couple of years ago I upgraded RAM from GB to GB a pair of sticks from a brand called SUPER TALENT I was hoping I could use Windows x but I had a lot of BSOD related with ntoskrnl exe 7 Windows x64 BSOD ntoskrnl.exe BAD_POOL_CALLER I got tired looking for a fix but I could find any so I bought a pair of Dell Certified memory sticks some days ago GB each because I thought the other sticks were damaged For a couple of days Windows seemed to work fine till some hours ago BSODs returned BSOD Windows 7 x64 BAD_POOL_CALLER ntoskrnl.exe I have installed Windows x x several times and I cannot avoid BSODs to appear Windows XP works fine and Ubuntu x PAE both run smoothly on this laptop but now I need to migrate to Windows and I'm not able to do it because of BSOD Windows 7 x64 BAD_POOL_CALLER ntoskrnl.exe continuous BSODs Dump File - - dmp Crash Time - - Bug Check String BAD POOL CALLER Bug Check Code x c Parameter Parameter b BSOD Windows 7 x64 BAD_POOL_CALLER ntoskrnl.exe Parameter Parameter fffff a Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe c File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win sp gdr - Processor x Crash Address ntoskrnl exe c Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Thank you very much for your help Best regards

A:BSOD Windows 7 x64 BAD_POOL_CALLER ntoskrnl.exe

I must add all my drivers are (or at least seem to be) up-to-date, I use Drivermax. I ran verifier.exe, enabled non-Microsoft drivers, restarted and got BSODs before "Welcome" screen, I got to go through Safe Mode and disable this in order to have access to Win7 again. There seems to be another issue with igdkmd64.sys but I don't know how to fix it.

Thank you again.

http://www.sevenforums.com/bsod-help-support/290336-bsod-windows-7-x64-bad_pool_caller-ntoskrnl-exe.html
Relevancy 51.6%

I keep getting the BSOD ntoskrnl.exe daily.  Today, I received a new BSOD error luafv.sys  The Bios is updated to the latest version.  Everything seems to be fully updated.  This is a problem I have been trying to fix for a month now.  I can provide the minidump files.  Can anyone help with this problem.
 
 
Thanks

A:ntoskrnl.exe BSOD Windows 7 64bit

to the forum mate.
 
Please follow the below steps.
 
Upload the actual crash dump files.
 
You will find the crash dump files inside C:\Windows\Minidump folder. To copy the dumps, disable "User Account Control" first. Otherwise you may receive a permission error. After disabling UAC, copy and zip all the dumps and create an archive. Either attach the zip with next reply using "More reply options --> Attach files" or use a free file hosting site. 
 
For example -> http://www.mediafire.com/
 
Publish a snapshot of your system using Speccy.
 
"Speccy" is a free tool which can list the hardware specs, temperature status, installed Windows updates, HDD SMART info etc of your system. Please read the below tutorial to know how to use "Speccy" to collect system info.
 
http://www.bleepingcomputer.com/forums/t/323892/publish-a-snapshot-using-speccy/
 
Don't paste the output displayed by "Speccy" here. Instead paste the web link it displays.
 
Minitoolbox log.
 
"Minitoolbox" can list all the installed programs as well as event log errors in your system. Download "Minitoolbox" from the below link.
 
http://www.bleepingcomputer.com/download/minitoolbox/
 
 Run the tool and only select the following tick boxes.
 
 
List last 10 Event viewer errors
List installed program
List users, partition and memory size
List Minidumps
 
Now click "Go" and post the output displayed in next reply.

http://www.bleepingcomputer.com/forums/t/532288/ntoskrnlexe-bsod-windows-7-64bit/
Relevancy 51.6%

hello!

i have win7 64bitsp1 installed yesterday with all updates until i started to get random bsod (pc was idle 5hours until i tryed typing url in opera) regarding tcpip.sys, ntoskrnl.exe and netio.sys+ 7c74
i've managed to see this info using bluescreenview program but i don't know how to use debugger to see stacked text please help...
thx in advance

little suspicious about 2 new software proggys i installed and replaced with older versions are tune up utilities 2013(used 2012 before with no bsods) and newer version of eset smart security 5(used older version 5 with no bsods)

guys please help!

A:Windows 7 BSOD: tcpip.sys and ntoskrnl.exe

The zip you uploaded does not contain any crash dump.

Dump Files - Configure Windows to Create on BSOD

Follow it manually in the default path: C:\Windows\Minidump or %SystemRoot%\Minidump.

Post it at the next crash, following the Blue Screen of Death (BSOD) Posting Instructions.

http://www.sevenforums.com/bsod-help-support/267805-windows-7-bsod-tcpip-sys-ntoskrnl-exe.html
Relevancy 51.6%

Hi I have regular blue screens The last of were ntoskrnl exe drivers found in BlueScreenView https docs google com file d B ml hGeGNMMFU edit Latest Dumps https drive google com folderview Uk amp usp sharing Previously tried changing graphics card for a new one had ram tested reinstalled w -bit ran core temp with normal temps recorded throughout but I dont think it records temps at the precise moment of bsod Mainboard MSI -G MS- Chipset AMD Processor AMD Phenom II X MHz Physical Memory MB x DDR -SDRAM Video Card NVIDIA GeForce GT Now GeForce GT Hard Disk HDS VLSA ATA Device GB Hard Disk OCZ-VERTEX ATA Device GB DVD-Rom Drive Optiarc DVD RW AD- S Network Card Attansic Now owned by Atheros AR PCIe Gigabit Ethernet Controller Ace A- BR power supply Age of hardware no idea bought second hand Computer store shop reinstalled W bit weeks ago Any help appreciated hope i've followed posting instructions correctly

A:BSOD ntoskrnl.exe 64-bit windows 7 + DWM Crashes

Hi -

The dumps are rather inconclusive ay best, naming (unknown) "hardware" as the probable cause in most.

For info, ntoskrnl.exe = the Windows NT Kernel & Executive. It is often listed as a default when the dump is unable to name a definitive cause.

Video may be an issue, but I see that your NVIDIA drivers are up to date.

You have SSD(s)...?

Check SSD manufacturer's support site for firmware upgrade.

Regards. . .

jcgriff2


`

BSOD SUMMARY

Code:

Loading Dump File [C:\Users\PalmDesert\_jcgriff2_\dbug\__Kernel__\053113-10249-01.dmp]
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
Debug session time: Fri May 31 18:55:19.994 2013 (GMT-4)
System Uptime: 0 days 3:06:33.524
Probably caused by : hardware ( nt!KiDoubleFaultAbort+b2 )
BUGCHECK_STR: 0x7f_8
DEFAULT_BUCKET_ID: VERIFIER_ENABLED_VISTA_MINIDUMP
PROCESS_NAME: ChargeService.
FAILURE_BUCKET_ID: X64_IP_MISALIGNED
Bugcheck code 0000007F
Arguments 00000000`00000008 00000000`80050031 00000000`000006f8 fffff800`02cbc447
??????????????????????????????????????????????????????????????????????????????????????``
Loading Dump File [C:\Users\PalmDesert\_jcgriff2_\dbug\__Kernel__\053113-7566-01.dmp]
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
Debug session time: Fri May 31 15:37:56.253 2013 (GMT-4)
System Uptime: 0 days 1:21:25.767
Probably caused by : ntkrnlmp.exe ( nt!KiDoubleFaultAbort+b2 )
BUGCHECK_STR: 0x7f_8
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: ChargeService.
FAILURE_BUCKET_ID: X64_0x7f_8_nt!KiDoubleFaultAbort+b2
Bugcheck code 0000007F
Arguments 00000000`00000008 00000000`80050031 00000000`000006f8 fffff800`02cc5041
BiosVersion = V10.8
BiosReleaseDate = 03/03/2011
SystemManufacturer = MSI
SystemProductName = MS-7599
??????????????????????????????????????????????????????????????????????????????????????``
Loading Dump File [C:\Users\PalmDesert\_jcgriff2_\dbug\__Kernel__\053113-7534-01.dmp]
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
Debug session time: Fri May 31 09:34:53.255 2013 (GMT-4)
System Uptime: 0 days 0:22:21.769
Probably caused by : hardware ( nt!KeReleaseSemaphore+24e )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0xA
PROCESS_NAME: explorer.exe
FAILURE_BUCKET_ID: X64_IP_MISALIGNED
Bugcheck code 0000000A
Arguments ffffffff`ffffffa5 00000000`00000002 00000000`00000000 fffff800`02ca933e
BiosVersion = V10.8
BiosReleaseDate = 03/03/2011
SystemManufacturer = MSI
SystemProductName = MS-7599
??????????????????????????????????????????????????????????????????????????????????????``
Loading Dump File [C:\Users\PalmDesert\_jcgriff2_\dbug\__Kernel__\053113-7706-01.dmp]
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
Debug session time: Fri May 31 08:08:45.687 2013 (GMT-4)
System Uptime: 0 days 0:49:23.201
*** ERROR: Symbol file could not be found. Defaulted to export symbols for win32k.sys -
Probably caused by : win32k.sys ( win32k!BRUSHOBJ_hGetColorTransform+4b472 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x50
PROCESS_NAME: csrss.exe
FAILURE_BUCKET_ID: X64_0x50_win32k!BRUSHOBJ_hGetColorTransform+4b472
Bugcheck code 00000050
Arguments fffff800`7056d548 00000000`00000008 fffff800`02cfd4bb 00000000`00000005
BiosVersion = V10.8
BiosReleaseDate = 03/03/2011
SystemManufacturer = MSI
SystemProductName = MS-7599
??????????????????????????????????????????????????????????????????????????????????????``
Loading Dump File [C:\Users\PalmDesert\_jcgriff2_\dbug\__Kernel__\053013-8970-01.dmp]
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
Debug session time: Wed May 29 19:51:02.692 2013 (GMT-4)
System Uptime: 0 days 4:50:47.832
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+1c9205 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x3B
PROCESS_NAME: poke... Read more

http://www.techsupportforum.com/forums/f299/bsod-ntoskrnl-exe-64-bit-windows-7-dwm-crashes-696826.html
Relevancy 51.6%

My computer crashed with a BSOD while watching a Youtube video. I have not had any BSOD for the past 6 months, nor did I did [COLOR=#3485bd !important][COLOR=#3485bd !important]install[/COLOR][/COLOR] any new apps recently.

6 months ago I was experiencing an issue with BSOD as well but when I resitted the memory the issue has disappeared, I do not have mini dumps from 6 months ago.

I just ran Pre-boot self assessment test that is available in Alienware bios and it did NOT detect any issues.

Specs:
Alienware Aurora
-Windows 7 64-bit Ultimate
-Core i7 960 3.2GHz.
-12 GB of RAM - 1066MHz.
- [COLOR=#3485bd !important][COLOR=#3485bd !important]Radeon[/COLOR][/COLOR] HD 5870
-PSU 875Watt
-HD 1.5TB
-BlueRay Writer

A:Windows 7 - BSOD: IRQL_NOT_LESS_OR_EQUAL with ntoskrnl.exe

NOTE: I have severe eye problems. If I do not respond to your postings, please PM another staff member for assistance.

Please stop highlighting stuff as "IMPORTANT" as it's nearly impossible to read with my eyes (I use the Windows 7 High Contrast mode)

PERFMON reports that the driver for your SATA controller isn't installed. Please visit the Alienware support site and download/install this driver. AFAIK, this is the RR252x SATA Controller made by Silicon Image (PCI\\VEN_1095&DEV_3132)

There is just one memory dump in the uploaded attachment. In many cases the system will fix itself after this, so my recommendation is to keep an eye on it to see if this happens.

If you're not that patient (I'm not!), then here's some other suggestions.....

MSINFO32 reports many application crashes with rage.exe and xrEngine.exe. Please ensure that you have the latest version of all files and patches for these programs.

The BSOD reports that the crash occurred in one of the drivers for the video sub-system. As such the problem could be with the video drivers or the video hardware (but overheating, security software and networking drivers/hardware can also be causes).

Although you appear to have the latest video drivers, I'd suggest uninstalling them. Then download and install a fresh copy from the ATI website (to help rule out any possible corruption of the driver(s)).

I'd also run the following free video stress tests to see what it shows:

Quote:





Quote:




FurMark download site: FurMark: VGA Stress Test, Graphics Card and GPU Stability Test, Burn-in Test, OpenGL Benchmark and GPU Temperature | oZone3D.Net
FurMark Setup:
- If you have more than one GPU, select Multi-GPU during setup
- In the Run mode box, select "Stability Test" and "Log GPU Temperature"
Click "Go" to start the test
- Run the test until the GPU temperature maxes out - or until you start having problems (whichever comes first).
NOTE: Set the alarm to go off at 90?C. Then watch the system from that point on. If the system doesn't display a temperature, watch it constantly and turn it off at the first sign of video problems. DO NOT leave it it unmonitored, it can DAMAGE your video card!!!
If the temperature gets above 100?C, quit the test - the video card is overheating.
- Click "Quit" to exit





Quote:




Prime95 download site: Free Software - GIMPS
Prime95 Setup:
- extract the contents of the zip file to a location of your choice
- double click on the executable file
- select "Just stress testing"
- select the "Blend" test. If you've already run MemTest overnight please run the "Small FFTs" test instead. (run all 3 if you find a problem and note how long it takes to error out with each)
- "Number of torture test threads to run" should equal the number of CPU's times 2 (if you're using hyperthreading).
The easiest way to figure this out is to go to Task Manager...Performance tab - and see the number of boxes under CPU Usage History
Then run the test for 6 to 24 hours - or until you get errors (whichever comes first).
Monitor the CPU temperature and DON'T let it exceed 85?C. If it does, then you probably have a CPU cooling problem.
This won't necessarily crash the system - but check the output in the test window for errors.
The Test selection box and the stress.txt file describes what components that the program stresses.
More details on the use of this test: Torture test your CPU with Prime95





Quote:




More Video Stress Tests:
1. Thanks to VirGnarus for finding this test: https://simtk.org/home/memtest
2. Two other video stress tests (may be more stressful than FurMark):
NOTE: I have had reports that some ISP's will block this website
Video Memory stress Test - ???* NVIDIA / ??????? / VMT
Artifact ... Read more

http://www.techsupportforum.com/forums/f299/windows-7-bsod-irql_not_less_or_equal-with-ntoskrnl-exe-620835.html
Relevancy 51.6%

hi here is the issue about two weeks ago Windows BSOD 7 ntoskrnl.exe+7cc40 - I took my laptop to the service because its disk drive not seeing any cd or dvd than they changed it with a new one after that they said we updated the bios after or days later BSOD Windows 7 - ntoskrnl.exe+7cc40 I'm on the Internet I got blue screen error driver power state failure I tried to update some of my driver such as graphic driver and tried to update windows it did't work third crash happened when I was trying to model something I opened the program at the same time rhino solid dsmax last crash was happened this morning when I was trying to restart my computer it says closing the pc but after - minutes later it crashes in addition my laptop opens very slowly than usual Some information about the crash Sorunlu Olay Ad BlueScreen OS S r m Yerel Kimlik BCCode f BCP BCP FFFFFA DA BCP FFFFF BA BCP FFFFFA E B OS Version Service Pack Product I check my pc with bluescreenview it says ntoskrnl cc error but don't know what to do and sorry for my bad English I really need your help Thank you in advance

A:BSOD Windows 7 - ntoskrnl.exe+7cc40

Welcome aboard, Brabbit.

Fresco Logic xHCI (USB3) Device Driver is initially identified as the cause of the crash.

Code:
Irp is active with 4 stacks 3 is current (= 0xfffffa8005e36410)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace. Pending has been returned
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 16, 0] 0 0 fffffa800667da10 00000000 00000000-00000000
\Driver\pci
Args: 00000000 00000000 00000000 00000005
>[ 16, 2] 0 e1 fffffa800860dac0 00000000 fffff800032e31b0-fffffa800e4492c0 Success Error Cancel pending
Unable to load image \SystemRoot\system32\DRIVERS\FLxHCIc.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for FLxHCIc.sys
*** ERROR: Module load completed but symbols could not be loaded for FLxHCIc.sys
\Driver\FLxHCIc nt!PopSystemIrpCompletion
Args: 00016600 00000000 00000006 00000005
[ 0, 0] 0 0 00000000 00000000 00000000-fffffa800e4492c0

Args: 00000000 00000000 00000000 00000000
And, the driver is very old.

Code:
start end module name
fffff880`049a5000 fffff880`049f5000 FLxHCIc T (no symbols)
Loaded symbol image file: FLxHCIc.sys
Image path: \SystemRoot\system32\DRIVERS\FLxHCIc.sys
Image name: FLxHCIc.sys
Timestamp: Thu Feb 24 14:29:52 2011 (4D661E08)
CheckSum: 0004C3F2
ImageSize: 00050000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
You try to update it from FRESCO LOGIC INC.===Leap into SuperSpeed===.

The Device Object of the blocked IRP is really interesting.

Code:
Device object (fffffa800860dac0) is for:
InfoMask field not found for _OBJECT_HEADER at fffffa800860da90
\Driver\FLxHCIc DriverObject fffffa8008668910
Current Irp 00000000 RefCount 0 Type 00000022 Flags 00002050
DevExt fffffa8008af1370 DevObjExt fffffa800860dc30
ExtensionFlags (0000000000)
Characteristics (0x00000100) FILE_DEVICE_SECURE_OPEN
AttachedTo (Lower) fffffa800667d7f0*** WARNING: Unable to verify timestamp for ACPI.sys
*** ERROR: Module load completed but symbols could not be loaded for ACPI.sys
Unable to load image \SystemRoot\System32\Drivers\sptd.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for sptd.sys
*** ERROR: Module load completed but symbols could not be loaded for sptd.sys
\Driver\ACPI
Device queue is not busy.
Daemon Tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known BSOD causer. Uninstall the program at first. Then download SPTD standalone installer from Disk-Tools.com, and execute the downloaded file as guided below :
Double click to open it.
Click this button only:

If it is grayed out, as in the picture, there is no more SPTD in your system, and you just close the window.
From another crash dump, that is alos a stop 0x9F; showing a different crasher. Atheros Bluetooth Driver.

Code:
Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 e1 fffffa8009de5030 00000000 00000000-00000000 pending
Unable to load image \SystemRoot\system32\DRIVERS\btfilter.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for btfilter.sys
*** ERROR: Module load completed but symbols could not be loaded for btfilter.sys
\Driver\BtFilter
Args: 00000000 00000001 00000001 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-fffffa800ec5dc90

Args: 00000000 00000000 00000000 00000000
Update it from ATHEROS drivers for Microsoft Windows (Atheros?????).

Apparently there are no other errors, but as the system is crashing, you should pay attention to these suggestions, too.

Free up the startup.
Click on the Start button
Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the “Sta... Read more

http://www.sevenforums.com/bsod-help-support/273475-bsod-windows-7-ntoskrnl-exe-7cc40.html