am using windows 7 x64.
i had BSOD problem and found out the problem is mother boards ram slots and one of my ram is also malfunctioning.
After replacing with a new different mother board i am getting BSOD in startup.
i thought windows 7 will automatically accept the new chipset. Is there are any ways to prevent from reinstalling windows again ?
Note : since the system is getting BSOD in the startup i couldn't get the dump file.
I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.
I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.
You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)
Blue Screen of Death (BSOD) Posting Instructionshttp://www.sevenforums.com/bsod-help-support/129423-bsod-new-mother-board-help.html
Hi techspotters it has come time to modify my old rig I m planning to upgrade the cpu without changing my motherboard but there is a slight risk involved that the purchase I am going to make is with CPU board AM3+ AM3 faul So back to basics My current MB M A TD PRO AM3 board with AM3+ CPU USB - link Current CPU Phenom t oc running ghz Current RAM EVOleggera x running underclocked mhz the one to upgrade to AMD FX -- So this is a basic operation a cpu swap but few questions popped up on the research phase M A TD is a AM board which apparently after some searching supports some of the FX series cpus that are AM I have also found the corresponding BIOS that I need to flash myself to to make it work properly and be recognized by the MB link Q amp A FX is known to support mhz RAM speeds my existing RAM runs max at without overclock and is placed x which occupies all slots and might confuse the FX which supports dualchannel as usual Meaning I will need to leave my RAM running at mhz how big will the reduce be in the performance of the CPU- mhz vs When setting up the proceccor I will need to disable the Turbocore to make it stable on the older AM board which only supports cpu speeds up to ghz and the fx on turbo bumps to ghz After disabling turbo all cores are set to run at which by research is the most stable option on my existing MB Will FX bottleneck gtx or gtx and how bad it is going to be Upgrading hardware is always nice but am I making bold move by upgrading a year old cpu to almost as old one And if someone with more knowledge can state me that there is no performance gain to be maid I just might stick with my old as long as its still breathing and calculating Thanks in advance for replys And no changing an motherboard is not an option So fond of my old rig best regards m nbsphttp://www.techspot.com/community/topics/am3-board-with-am3-cpu.214400/
I bought an interesting little Single Board Computer as an mITX motherboard (a WADE-8020, more info at the link below):
I have another similar board in an old Hoojum Cubit 3 case, and was wondering if anyone might have any other suggestions for a similarly eye-catching case, probably ready-made, though I'm not averse to either buying a DIYed case, or maybe trying to make one myself (I have a Dremel but not much else, and that includes skill )
On my studio pc, I've installed a new rack mounted firewire audio interface in the studio. On the other drives (windows 8.1) the interface has installed perfectly but on the xp drive, although the drivers etc have been installed, once set, it works perfectly with the new outboard soundcard.
However, whenever I reboot to the xp drive, xp always reverts back to the on-board realtek sound card. I set the default to the new interface (a Presonus Firestudio Project) but every reboot it defaults to the realtek.
The motherboard is a P5N-E SLI if that helps.
How can I stop this happening so the new interface is the default?
Thanks in advance,
So heres the story The computer has been working fine for several years Last night I decide to D850MV/D850EMV2 long Three desktop board beeps on Intel plug in my tv to the desktop via dvi It Three long beeps on Intel desktop board D850MV/D850EMV2 works fine and I dont have any problems I get home today and try and turn the computer Three long beeps on Intel desktop board D850MV/D850EMV2 on and I dont get any video signal to either the tv or the normal monitor Also long beeps accompany start up it sounds as though things boot but I dont get video or sound but it sounds like the hard drives click now and then like normal and the fans all run fine Ive swapped the first ram stick with one other and havent tried the rest yet and I have not changed the video card yet but plan to in the next minutes as of writing this Nothing looks physically damaged and I dont have any extra ram for this computer laying about since its a rambus so all I can do is swap the ram thats in it around and because I cant get video I cant run a test on the ram Suggestions or help would be appreciated Specifically what the long beep codes mean ive Three long beeps on Intel desktop board D850MV/D850EMV2 found a couple different versions of the code online and not sure which is correct Also what might have caused the problem plugging the tv in thats the only thing I did different unless someone was messing around with it without my knowledge or could it just be from years of wear or what nbsp
I think three beeps on Intel is a memory issue. At least that what it was when I had a stick of cheap RAM crap out on me.
I'd run Memtest and go from there
RAM can fail from a number of causes. Heat exposure, flaky transistor junctions, who knows. I seriously doubt plugging the TV in had anything to do with it.
You could go into BIOS to ascertain if the RAM voltage is set correctly. Over-volting is a DIMM killer.
You should be able to get documentation for that board directly off Intel's web site. Intel used to give BIOS beep codes ion the board/chipset manuals.
They also have hardware monitor software as a free download. Look up "Intel Desktop Utilities Lite".
This is my Entire system spec Im looking to upgrade my processor but I need help Operating System System Model Windows Home Premium x Service Pack build Install Language English United States System Locale English United States Installed AM Boot Mode BIOS Secure Boot not supported eMachines ET G System Serial Number PTNBA Enclosure Type Desktop Processor a Main Circuit Board b gigahertz AMD Athlon II X u kilobyte primary memory cache kilobyte secondary memory cache -bit ready Multi-core total Not hyper-threaded Board eMachines MCP PM-GM Bus Clock megahertz BIOS AMI P -A Drives Memory Modules c d Gigabytes Usable Hard Drive Capacity Gigabytes Hard Drive Free Space HL-DT-ST DVDRAM GH N SCSI im with AMD is board? to my What Processor mother compatible this And new CdRom Device Optical drive WD Virtual CD USB Device Optical drive Generic- Compact Flash USB Device Hard drive -- drive Generic- MS MS-Pro HG USB Device Hard drive -- drive What AMD Processor is compatible with my mother board? And im new to this Generic- SD MMC USB Device Hard drive -- drive Generic- SD MMC MS What AMD Processor is compatible with my mother board? And im new to this MSPRO USB Device Hard drive -- drive Generic- SM xD-Picture USB Device Hard drive -- drive WD My Book USB Device Hard drive GB -- drive s n WMAVY WDC WD AAKX- CA SCSI Disk Device GB -- drive s n WD-WMAYUL SMART Status Healthy Megabytes Usable Installed Memory Slot DIMM has MB serial number DE B Slot DIMM has MB serial number D B Slot DIMM is Empty Slot DIMM is Empty Local Drive Volumes c NTFS on drive GB GB free k FAT on drive GB GB free Operating System is installed on c Network Drives None discovered Users mouse over user name for details Printers local user accountslast logon Quentin PM admin UpdatusUser AM local system accounts Administrator AM admin Guest PM HomeGroupUser never Marks a disabled account Marks a locked account HP LaserJet Professional P w on IP Microsoft Shared Fax Driver on SHRFAX Microsoft XPS Document Writer on XPSPort Controllers Display ATA Channel Controller ATA Channel Controller NVIDIA nForce Serial ATA Controller x Standard Dual Channel PCI IDE Controller What AMD Processor is compatible with my mother board? And im new to this NVIDIA GeForce GTS Display adapter DELL WFP Monitor quot vis s n XX- JU -XXXXX- - S June Bus Adapters Multimedia Standard Enhanced PCI to USB Host Controller Standard OpenHCD USB Host Controller HP Webcam HD- Mobiola Wave Audio Device WDM Mobiola Web Camera Video Source NVIDIA Virtual Audio Device Wave Extensible WDM Realtek High Definition Audio Senstic PocketAudio Senstic PocketCam USB Audio Device Virus Protection Back to Top Group Policies No details available None discovered Communications Other Devices Hamachi Network Interface primary Auto IP Address Gateway Dhcp Server Physical Address A D Connection Speed Mbps Microsoft to Adapter Microsoft ISATAP Adapter NVIDIA nForce Mbps Ethernet Auto IP Address Gateway Dhcp Server Physical Address FC C AA Connection Speed Mbps Teredo Tunneling Pseudo-Interface Networking Dns Servers HID-compliant consumer control device x HID-compliant device x USB Input Device x HP Webcam HD- HID Keyboard Device x HID-compliant mouse Microsoft PS Mouse USB Composite Device x USB Mass Storage Device x USB Root Hub x Generic volume shadow copy WD SES Device E F G H I nbsp
That is an AM3 socket CPU which means it should be compatible with the Phenom II series CPU's. I looked up the board and it should still support up to a 95 watt CPU so any Phenom II X4 CPU with a 95 watt TDP would work on it.
As the topic says, my computer doesn't detect my on-board sound card. It all started when I tried to install new audio drivers from manufacturers page, but the next day when I booted PC up there were no sound. In Device Manager, under Sounds, game,.. controllers tab sit 4-5 High Definition Audio Devices. Here's pic:
Then tried re-installing original audio drivers from motherboard CD, enabling/disabling On-Board HD Audio in BIOS but still no luck.
My Audio Device is VIA VT1705.
DxDiag shows that no sound card was found.
This is what is shown in Playback Devices tab:
But I have no HDMI kind audio devices..
How to make my system recognize my sound card?
After my brother sprayed it with glass cleaner.my laptop key board types wrong letters.lets say I want to write "my laptop key board is messed up" this is what it types: my lap0to9p0 ke3ybo9ar4d i8s me3sse3d u7p0. all the letters in the upper row type the letter and the number above it and vise verse(exept t,y,5,6)
I tried the num lock and sticky keys,checked my language tap still nothing
(I use dell inspirion , windows 7)
Have you tried a USB keyboard? If not, try it. You might also try the on screen keyboard.
I just came from a retail store to check on prices but most of their parts weren't available anymore. Instead of a G. Skill Ripjaws 2x4 8gb DDR-3 1600, the clerk offered me a Crucial Ballistix 2x4 8gb DDR-3 1866 memory. The board I'm gonna buy is an Asrock H77 Pro4/Mvp but looking at their memory support list http://www.asrock.com/mb/memory.asp?Model=H77 Pro4/MVP, it doesn't seem compatible.
The clerk had told me it was compatible and that he had tried it before but I'm not sure if it'd have unwanted effects over some period of time. (I got drawn in by how the memory looks and its LED so I'm including it as a choice). Thanks.
It will be compatible, worst case scenario is just setting your 1866Mhz RAM to run at 1600Mhz. You're getting quicker RAM for free.
Hi all, I have monitor gericom 2030 and it has some power board model that I cant find on sell, so I have buy one that is almost same with it. 4 plugs for invetors are same but one connection for t-con board is diffrent and on oroginal board I have pins (5V, 5v, GND, GND, 12v, BL, N/F) and on board that I have buy has ( 12v, 12v, GND, GND, 5v, 5v, GND, N.C, ON, DIM, MS ) So any suggests wich on wich one I should connect?
I got a M5A99x Evo Re2.0, brand new board and the audio from the rear doesnt work at all when I plug the pink and green plugs. I have an HDMI connecting from my TV to my Gcard, I get audio through the TV but cant seem to get those jacks working. Ive used two different headsets to see if it might have been the headset itself. im really stumped.
Have you gone into the sound menu in your control panel and set your default audio device to your headset?
If, under the "playback" tab, the HDMI output is ticked, then this is the problem.
Just click on the correct device(It should either list your headphones or say "high definition audio", or something similar) and then click "set default".
This should solve the problem.
My father wants me to find my mother a laptop, he gave me a budget of around $700. In all likelihood she will mostly use it for facebook, facebook games and movies. She will mostly be using the laptop while working in a coffee stand so she can probably plug it in whenever she needs to. She probably wont replace it for some time so something that will hold up well over the years would be nice. She hates change and is used to using windows systems so I'm not sure if she would go for a mac. I really don't know a damn thing about laptops and I have no idea what to look for or where to start so any help would be appreciated.
Been a long time browser of TS and am glad to finally join. I am looking to utilize a Q6600 processor and the following system board and RAM:
ASUS P5G41T-M LX Plus
Corsair XMS3 1333MHz PC3-10666
The goal is to moderately overclock the Q6600 to 3.2 GHz. In my research, I have read many positive reviews about the stability of ASUS boards, and the DDR3 capability is significant to me. However, from what I have gathered, this board can be fussy when overclocking the CPU. Has anyone had any experience with a similar setup?
I would appreciate any thoughts/comments/suggestions.
Firstly, why do you need to overclock it? I'm guessing its more because you want to, than necessity, but my thoughts are below.
I run the exact same CPU in my system 24/7 and while it might be long in the tooth compared with most systems on here, it's certainly not lacking at stock speeds as it is.
Not sure if system specs is easily read right now, but for the sake of doubt, mine are: Intel Core2Quad Q6600 G0 stepping (at stock OC with Corsair H50 (push/pull) providing cooling), Abit AW9D-MAX, 8GB OCZ Gold series DDR2-1066, HD6870, Antec HCG-620 PSU, a SSD and six mechanical disks.
I wouldn't call 3.2GHz a moderate OC on the Q6600, that's more like 2.8-3.0GHz. I used to have mine overclocked but the difference was so minimal (in real terms) that the additional heat it gave off and power it consumed made it pointless. I was never able to achieve 3.05GHz or above either, but I've no doubt that more experienced hands would have managed it. Overclocking is my weaker subject in the field of IT generally speaking, and I can't say I've ever really pushed the envelope very far in that regard.
Though that said, I've always found Gigabyte boards to be much more forgiving when it comes to RAM settings. Asus in my experience can be a real nightmare with recognising the default timings and voltages for RAM, and in "my experience" need much more work to achieve the same result.
Another point that needs to be considered is LGA-775 is legacy hardware now, so you'd be spending money on defunct hardware. If you have the CPU it might be better to grab a second-hand board off of eBay or something, or maybe look to something newer and more current.
Bought me recently a new MoBo: P8H67, installed it, killed Realtek onboard in the BIOS, all thus far goes splendid.
Put in SoundMax (from my P5E Lifestyle), hardware checks ok.
Install driver... and here things go awkward: no matter what I try: SoundMax Hi Def is not found/recognized.
Tried both the DVD-soft that came with me P5E, as well as online new drivers, to no use...
Reason for SoundMax: I was slightly baffled by the power behind the tiny card, it was literally mindblowing (over my JBL's).
This power is not found on Realtek hardware, hence.
Prob: I want to keep using the tiny SoundMax, but I desperately need a driver.
Win 7 Ultimate X64 (registered)
Thank you all:
List any Problem Devices
Make sure devices are connected and powered on
Click Start->Run, enter: msinfo32. Click the + sign next to Components to expand it
Click Problem Devices. Anything appear?
If yes, click on it, Ctrl-A to select all, Ctrl-C to copy it, Ctrl-V to paste into next post
On the other hand, if no devices are listed, tell me so
Generate and attach a DirectX report
Click Start->Run, enter dxdiag and click OK
===> If you?re running 32 bit Windows, dxdiag will launch on its own
===> If you?re running 64 bit Windows, you?ll see 64-bit DxDiag. Click it to launch the 64-bit version of dxdiag
Notice progress in lower left window corner
When done, click Save Information button and save to your Desktop
In TechSpot window, use the paper clip icon to attach the report. (If you don't see icon you may need to first click Go Advanced)
i was wondering if HIS H675FS1G Radeon HD 6750 1GB 128-bit DDR3 PCI Express 2.1 x16 HDCP Ready Video Card would work on a MSI G31TM-P21 LGA 775 Intel G31 Micro ATX Intel Motherboard.
Card # at Newegg=N82E16814161395"]
Board#at Newegg= N82E16813130234
o wait the card is ddr3 , does that mean it won't work?
Sure, the card will work fine. The graphics card memory is independent from the memory type of the motherboard.
I have been going through the process of building a computer for the first time and the motherboard is the final piece of the puzzle I am seriously considering the Asus Maximus Gene-Z as the motherboard to go along with GB Hawks OC in SLI on mATX a Is SLI usually on board avoided? air to go along with an OC i - k but I have been seeing some concerns about temperatures in general As far Is SLI on a mATX board on air usually avoided? as cooling the board would be in a mid-tower that has the dimensions of the full tower Storm Sniper with its default fans and the CPU would be cooled by a Corsair A I do have a few ATX motherboard in mind if the mATX option isn t ideal for SLI including the MSI Z A-GD ASUS P Z -V PRO or ASRock Z EXTREME GEN i - K Corsair A GB GTX Hawk in SLI x GB G Skill Sniper DDR Samsung Spinpoint TB Asus x DVD-Drive Cooler Master Storm Sniper Seasonic X- nbsp
Personally if I was building a computer without having any hardware to start with I would probably aim for a higher end single card rather than 2 older and now mid range 460 GTX cards. That way in the future you can pickup another higher performance card and then use SLI.
As for mATX and SLI, as long as the board supports it then there is no problem. You have stated its in a full tower so airflow won't be a problem. You might find some problems such as PCI 1x slot blocked/unusable when you have two double slot (two expansion slot height) PCI-E graphics cards in the motherboard.
Hi all I have an asus x s laptop and a while ago the power jack inside broke off and went further into the unit I managed to take the laptop apart and retrieve the jack I then rather stupidly attempted to desolder board PCB Splintered the remainder of the unit from the board and found that apparently ASUS use diamond as solder that or I wasn t doing something right Anyway point is that the contacts stayed in the board no matter what and only with force Splintered PCB board and heat did they come out unfortunately however there are still two contacts firmly in the board Anyway as you can all imagine the inevitable happened The board warped slightly and on one of the corner points the iron went through and splintered the side picture attached A couple of questions Number And I think I already know the answer to this As this has happened will this be detrimental to the running of the laptop I m going to guess that the second I turn it on should I be successful in replacing that the power will short and the world will end or something Number Since last using the laptop I can only assume that the rest of the components processor RAM Drive etc are still in good working order and I m wondering just how successful anyone may think it would be to sell the laptop as spare parts or would I be better off taking into the yard with a shotgun Sorry about the cynical nature of this post that s just how I am that and I m incredibly annoyed at myself for thinking that me soldering iron delicate electronics was ever going to have any other outcome than this nbsphttp://www.techspot.com/community/topics/splintered-pcb-board.171757/
Need info old board P4SD-VL
<I'm trying to fix a very old pc; it's almost ready but I can't set front USB ports.>
Thatīs what I said. But more than a simple thing I need; USB frontal ports are working now. The matter is I canīt find drivers to set Sound, LAN, Modem... The pc is working fine, I've installed operating system, office programs and some other software without trouble.
Thanks in advance for your help.
Who made the motherboards chipset? VIA?
hello, ive had this desktop computer for years now and the processor is extremely outdated. I have been looking around trying to figure out how i can upgrade the processor speed but it seems the more i look up the less i know about computers...
anyways i have: Board: MICRO-STAR MS-7184
Serial Number: 5922655884
current proccessor: 2.00 gigahertz AMD Athlon 64
256 kilobyte primary memory cache
1024 kilobyte secondary memory cache
I believe the socket is a 939? when i looked up these specs i found that the highest processor i can place is " AMD Athlon 64 X2 (up to 4800+) and Sempron (up to 3200+) processors".
Can anyone verify this?Or is it not worth investing in a new processor? i am looking to find the best upgrade rather then spending cash to buy a new computer. Any advice would be extremely appreciated.
Truth be told you are better off upgrading your Motherboard, RAM, and Processor if you want to see any substantial difference. A socket 939 is quite a bit old and since then they have move onto the AM2, AM2+, AM3, AM3+, etc sockets for AMD Mobos and Processors.
Socket 939 processors are to the point where they are no longer just old enough to be cheap. Since they are no longer made they are old enough to be more expensive than modern counterparts in many cases.
When upgrading the MOBO and CPU you want to look into more than just the processor speed. Important factors are also the types and amount of cache for a processor, number of cores, and RAM that can be used with that CPU.
The newer Athlon II X2s as an example are a significant leap from the original Athlon 64s and a discerning buyer online can find them significantly cheap. AM2+ boards are currently somewhat inexpensive and so is DDR2 RAM. They are currently at the stage where they are old enough to be somewhat cheap but with the newest socket and processors being sold by AMD now it may change iwthin the next few years to start getting expensive again from being old enough.
You also have the route of a AM3 with DDR2 or DDR3 Ram option available which are also moderately priced.
If you check out the website pricewatch.com you can look at pricing for several different mobos, cpus, etc from various websites easily. I just completed a full build including case, HDD, Mobo, CPU, DVD-RW, RAM, Graphics card, etc for just over $350.00
I got a Intel Server Board L440GX with the dual Pentium III processors and i cant get it to recognize the Mylex eXtreme RAID 2000 FW 7.01-00. I have never configured a raid before but i think i got it right(not sure) anyway the bios says that no h.d. or likewise is installed. I ain't got any ideas on what to do please help
bwta, sound like you better take a look at:
Hi, (First Post)
While it is often true that when you get no post after startup, that it is often the powersupply - it would be nice to know if the motherboard is functioning properly.
I use power supply testers, a great time saver, but does anyone know of a reasonalby inexpensive motherboard tester on the market?
Well, I have seen a few mobo/ram testers on Ebay but have no idea how good they are. Just do a search on there for motherboard tester and several will come up, they are about Ģ20.
Hello guys......I need your help....I have sony vaio vgn-fs515b and after installing windows 7 i was updating its bios......!!!!
Everything was working fine but in between a blue screen came. It said that your system is shutting down due to some problem and at the end it said:
"Dumping physical memory".
When i restarted my laptop all the light were on but nothing came on screen. I don't know what to do.......Please help me........!!!!
I know this happened because of incomplete upgradation of bios but what should i do not?
The motherboards bios is corrupt. You may be able to correct this if you can pull the CMOS battery and reconnect it. Otherwise the motherboard will have to be replaced
ok first off i got this board second hand from my brother he couldnt get it to work at all however he thought it was a video card compatability issue He had a ATI Radeon card and its an NVIDIA chipset on the board Now that ive giving a tiny bit of back ground ill give you the systems specs or atleast the specs itll be once its working and can see things CPU Intel core duo E RAM GB DDR x OCZ REAPER Motherboard As mentioned EVGA NVIDIA i sli GPU GEforce GS PSU Sparkle W gold class TB for storage and a GB + no =( sli output board video Evga 680i Nvidia for the OS Thats whats in my box and the box itself is a Rosewill Evga Nvidia 680i sli board + no video output =( CRUISER So far everything looks like its powers up right and and the HDD spins up it seems like its posting correctly i jus cant get anyvideo out of it Any suggestions would be helpful also keyboards will not work in any usb port and on the mointer it says entering power save mode it detects the cable being there but does not get a signal ive tried multiple keyboards and multiple video cables nbsp
sounds like it's just a faulty board... it doesn't matter if you have a single ATI or NVIDIA card, it should work with either
Hello I have a desktop with motherboard Via KT CF- ruinign on windows xp I had a MB memory and the computer was running very slow with lots K7VTA3 ECS RAM v8) fully isn't recognized (board of RAM isn't fully recognized (board ECS K7VTA3 v8) lags I decided to buy some more memory and bought the lot of two kit Kingston KVR X C AK total of GB I opened the computer and inserted the two memory sticks on the motherboard and switch on the computer As it runs BIOS says only MB Ram and not GB RAM Other times it reads sometimes says MB and one time said MB RAM Its very strange this Whats going on I dont know but the site says that the board accepts DDR SDRAM Did I bought a wrong set of memory sticks or is it something wrong in the computer data from Everest software ID Motherboard -KT CF- -K VTA C- Motherboard ECS K VTA v Physical Memory Total MB Used MB Free MB Utilization North Bridge VIA VT Apollo KT Thanks Boto nbsp
I dont know but the site says that the board accepts DDR200/266/333 SDRAM.Click to expand...
You bought DDR400 so I'd say your RAM is not supported by your motherboard. Also, the voltage standard for your motherboard is 2.5 volts. Your RAM needs 2.6 volts although it should still run if your motherboard supported it in the first place. You might be able to bump up the voltage in the BIOS but I can't say for sure.
Okay, my board is as described. I have a black bank and a blue bank. I plan on upgrading to 8 gigs of RAM this spring. With my motherboard's setup, would I benefit more from 2 sticks of 4 gig RAM or 4 sticks of 2 gig RAM?
A link to my board:
Link us to your motherboard's website. The manual should contain the correct memory configurations.
On one rig I got GTS mb and it works flawlesslly However on another machine I got GTS Not 'oh really. so you GTS it crashes, BSOD, Gainward 250 name freezes... great'? gb which Gainward GTS 250 'oh so great'? Not really. BSOD, crashes, freezes... you name it earned the quot Piece Gainward GTS 250 'oh so great'? Not really. BSOD, crashes, freezes... you name it of sh t quot sticker The issues are usual for the gb model blue Gainward GTS 250 'oh so great'? Not really. BSOD, crashes, freezes... you name it screen restart games freeze crash audio loops inifinitely strange psychodelic colorful lines swarm the monitor cubes of various colors do the same And yes it happens in many games and to many people at least according to what I ve found browsing forums As with other people in my case too the issues happen with Bad Company Assassin s creed GTA etc It appears that the problem is with the nV drivers I ve found somewhere that installing a much older version of nVidia graphic drivers solves the issue but I d rather search for help on what to I ve updated BIOS Chipset Audio Lan DirectX nVidia GPU driver is Event Source nv Event ID Minidump files are bellow The error in the Event Viewer appeared on July th EDIT Forgot to mention tha powa is Thermaltek w Forward thanks Kreinzer nbsp
If its the 1gb model, just use a 512, you get like .01% less performance. And you could just update to the latest drivers, maybe Nvidia has since fixed the issues.
So I recently had my main computer crash and break to the point I need a new computer so I figured I'd make it worth it this time.
Here's the deal: (add the www to see it)tigerdirect.com/applications/searchtools/item-details.asp?EdpNo=6327547&SRCCODE=GOOGLEBASE&cm_mmc_o=VRqCjC7BBTkwCjCECjCE
Everything on there seems decent but I am curious about the board itself. Would the Intel Desktop Board DP55WB Motherboard be good for gaming, which I wish to use my computer mainly for. I have at most a 700 dollar budget and this seems like a nice deal for it. I plan on putting a Geforce GTX 580 graphics card in it as soon as I get the money as a little side note if it matters.
So I recently had my main computer crash and break to the point I need a new computer so I figured I'd make it worth it this time.
Here's the deal: (add the www to see it)tigerdirect.com/applications/searchtools/item-details.asp?EdpNo=6327547&SRCCODE=GOOGLEBASE&cm_mmc_o=VRqCjC7BBTkwCjCECjCE
Everything on there seems decent but I am curious about the board itself. Would the Intel Desktop Board DP55WB Motherboard be good for gaming, which I wish to use my computer mainly for. I have at most a 700 dollar budget and this seems like a nice deal for it. I plan on putting a Geforce GTX 580 graphics card in it as soon as I get the money as a little side note if it matters.Click to expand...
I'd suggest looking at the same chipset, but in either Gigabyte or Asus brands. Intel boards are fine, as much as it goes, but the BIOS is very limited as to configuration for different memory, and overclocking options. Intel really markets it's boards as mainstream items, intended for average users and businesses, they're not really aimed at the enthusiast.
The feature set can vary widely from board to board, and you should have a look at these pages to see which board has the capabilities you need;
Asus P-55; http://www.newegg.com/Product/Produ...600008069 600008216&IsNodeId=1&name=Intel P55
Gigabyte P-55; http://www.newegg.com/Product/Produ...600008069 600008216&IsNodeId=1&name=Intel P55
Hello For the past two weeks my laptop has been beeping It doesn t beep when I first turn the computer on Once I m to the desktop it starts Vista Studio Dell 64 continuous a BSOD with beep and 1536 has to beep and it s VERY inconsistent It may beep every five minutes or every minutes Sometimes it beeps once and other times its beeped two Dell Studio 1536 with Vista 64 has a continuous beep and BSOD or three times fast And occasionally I get the BSOD saying something about quot dumping my physical memory quot On top of that when I load the computer I get an error saying that my Catalyst Control Centre is not working I just assumed all these things were connected A few months ago my hard drive died so I installed a new one I haven t had any issues until the issues I listed above all of which start just a few weeks ago Unfortunately my warranty has expired so Dell s support hasn t been much help So does this sound like the hard drive I installed is creating the issues Any advice is very helpful nbsp
Have you checked for crud in your keyboard... any cause for a sticking key, sticking space bar, etc.
Don't see how the hard drive could cause the problem.
Have you looked at all the Dell Beep Codes... They are posted elsewhere on this TechSpot forum... that could give you a starting point.
how do u know if u have on board sound card on ibm
The easiest recognition sign would be 3.5mm jack plugs on the rear panel of the motherboard.
3 (Green, blue, pink) is common on older boards, 4, 5 or more commonly 6 jacks for newer (and 5.1 +) sound codecs.
If you post some details of the system/board the forum will be able to give you a more definitive answer.
Wondering if anyone has tried a non-Nocona, E-ATX dual Xeon board in the HAF 932. I'm talking one of the newer Dual-Xeon boards. I know I lose the single-CPU ATX back opening, but I'm more concerned about if it actually handles a dual-Xeon E-ATX board.
Thanks for any help.
I plan to upgrade my video card from geforce 9500GT to geforece GTS250.. my mother board model is gigabyte GA-M61PME-S2P..
Powersupply? Just making sure...
So i decided to fire up my brothers computer that he hasnt used for about 2 years and keep running into the bsod with the error about nvlddmkm.sys for my graphics card, the monitor is also blurred as in the colors are distorted and random colors will blurr to the right or the left of where they should be. I can get it to bootup once i go into safe mode and delete the nvlddmkm.sys but when i try and install the latest driver and reboot the same problem and same error pops up. Any advice on how to fix this error? And I was hoping that by installing the newest driver properly that perhaps the blurry screen will clear up, is that just wishfull thinking or could the blurry screen actually be fixed? The computer is running vista 64 with 4g ram and 750w psu. Thanks for the help guys.
as you can imagine nvlddmkm.sys is part of the driver installation so simply deleting it will either cause errors or blue screens. there are a number of things that could be causing this to happen, such as corrupted files, a bad power supply, or even the card itself. the first thing i would advise is to do a clean installation of the display drivers, which requires you to use a piece of software such as Driver Sweeper to completely purge the associated driver files. once this is done, you can restart the computer and proceed to install the drivers normally.
if this fails, you may be looking at corruption in Vista itself or possibly with the motherboard chipset drivers. there's also a slim chance that you need to update DirectX software or frameworks for graphics-based software. if it comes down to having to test the actual hardware, there are limited options. the best way would be to test the card in another computer (preferably one with a different OS) and to test the power supply and RAM if you can. is there any reason in particular that the computer hasn't been used for a couple of years? there's always a possibility that your brother knew to replace something and never did
I want to put together two of the new GTX 460 video cards and using an i7-870 proc.
Any SLI mobo recommendations?
what price range are you in here?
......Hmmmmm, something tells me Chef will be here in a minute with 3....no...make that 4 recommendations.
I want to turn on my PC automatically during late hours so that I can do some downloads and maintenance works on my PC automatically!!
But I cant find an option for RTC alarm enabling in this BIOS!!
Whats wrong with this Mobo?
Will any one help me?
I just bought some Hardware to build a new computer from Scratch.
1. Asus P5E3 Pro Motherboard (DDR3 RAM DIMMS)
2. PSU Coolmax CUL-750B 750W
3. 2x2GB OCZ OCZ3G10664GK R (DDR3 RAM)
4. VGA Card - ASUS ENGTS250/DI/512MD3
5. Intel Core 2 Quad Q8400 2.66Ghz 1333
I installed Windows 7 x64bit OEM
I am having problems with BSOD (different ones not the same one every time)
I would like to know if its a compatibility Problem with My RAM and Motherboard or could it be something else. I am very bad with Hardware and I just bought parts that I knew could fit in theory.
BIOS is set to default because I don't know how to configure it (Probably thinking why did I buy parts instead of a built computer)
Could you please help?
Your RAM isn't on Asus' memory QVL (Qualified Vendors List)-but that isn't to say that it's not supported.
Having your power supply checked might be an option if your graphics card seems to run slow or you are getting fluctuating performance.
Because OCZ memory modules lack what are called embedded XMP profiles, your motherboard will have difficulty assigning a setting for them so you will need to do it manually.
Download Memtest86+ from here http://www.memtest.org/#downiso
***under the Memtest86+ v4.00, select "Download -Pre-compiled bootable iso ", save and unzip if downloading the zip file then burn a BOOTABLE CD using ImgBurn or your usual burning software (Nero etc.).- this program runs at BIOS level
Download MemSet here http://www.softpedia.com/get/System/System-Info/MemSet.shtml
You can also download CPU-Z -it gives a much simplified version of the RAM timings but you can also access chipset and CPU info. download here http://www.cpuid.com/cpuz.php
First order of business would be ascertain whether the RAM modules are not defective.
I presume the RAM in question is OCZ's Gold XTC modules - if they are then you can try to manually select the timings- they should be on a sticker on the side of the RAM, which should be 7-7-7-21 ( CAS (or CL)-tRCD-tRP-tRAS) at 1.5 to 1.6 volts.
IF THIS IS NOT YOUR RAM THEN GO NO FURTHER, If it is then you need to set it in order to test it for stability.
Boot into your BIOS. Select the second tab "A.I.Tweaker"
Set PCIE Frequency to 100 (if not already set)
Set DRAM Frequency to DDR3-1066 (if not already set)
Set DRAM Command rate to 2T (if not already set)
Set DRAM Timing Control to Manual
Note the string of timings following "Pri.Information" on the next line-they should be the same as the settings you are about to input.
Set CAS# Frequency to 7 DRAM Clocks
Set RAS# to CAS# Delay to 7 DRAM Clocks
Set RAS# Precharge to 7 DRAM Clocks
Set RAS# Active time to 21 DRAM Clocks
leave the rest of the timings on Auto for now and move down the page until you get to..
DRAM Voltage ....type in 1.60
Hit F10 to save and exit
**If you can boot into windows then run Memset (NOT the Memtest86+ cd you burned!) and note -or better still get a screen capture of the timings (and include in your next post)-here is an example of one of my old screenshots-take no notice of the values but note that both modules SPD (A and B )values are shown-so expand the window.
** If you cannot load Windows then get back to the BIOS and revert settings by choosing Restore Defaults, F10 to save and exit. The likely cause will be insufficient MCH (Northbridge) voltage.
If Memset shows you the correct values and voltage then you can move on to testing.
Reboot and select CD as your first bootable drive
Insert your Memtest86+ bootable cd into the drive
Hit F10 to save and exit
Memtest86+ will boot automatically once the motherboard POST's. As it's a DOS program it is fairly straightforward -The test actually comprises 8 seperate tests. Once all 8 have run then your RAM has completed a "Pass" -for 4Gb a Pass takes around 20-30 minutes.
Run 7 (minimum) to 12 passes. If the testing shows no errors then stop the test at your leisure.
Return to your BIOS, change the boot order back to Harddrive (I assume)
Take the CD out of the drive
F10 to save and exit -congratulations your RAM is stable. The next step would be to stress test the CPU/RAM fo test for stability- but one thing at a time
If the test throws up errors then note the Number of the test and the error code- the test will continue if the errors are not to great. If the testing serquence stops then stop the test, reboot, change boot order, remove cd and F10.
The RAM could fail from either physical damage it has suffered or the timing (and sub-timings) are unstable. We can look into that if the need arises.
Hi I have been having problems with my hdd s circuit board on my dell d I aint sure what happen I think it Toshiba circuit HDD board was just my bad luck Anyways I was wondering if its possible of saving the HDD by switching the board with one of the same model boughten brand new off the internet Also I forgot to mention that I put a master password Bios password also applied but thats not a problem since I am able to enter my password on the hdd so no could get into it without my consent just in case it got stolen I am just wondering if that will screw anything up with the new circuit board The name and model of the hdd is Toshiba Toshiba HDD circuit board MK GAX I hope someone can give Toshiba HDD circuit board me some advice on this topic because I don t want to wast my money which ever way I go buy a new hdd or just a circuit board Please respond and thanks in advance nbsp
Come on people, just don't let me hang. I need something, thoughts, ideas, and/or anything else. I just don't want to leave with nothing...
I will be upgrading my system in july and was wondering if anyone can recomend a new cpu, motherboard and DDR3 sims. I currently have an E8500, ASUS P5N-32E, GTX275, Corsair TX650 PSU and 4gig of DDR2. I was thinking of going with the an Intel Core i7 930 2.80Ghz (Bloomfield) (Socket LGA1366). Can anyone recomend a good board around Ģ150-180 that will fit this CPU and also some DDR3 sims?
The Asus P6X58D-E is a great motherboard at your price point.
Are you planning on going with 6GB of DDR3 memory to utilise the CPU's triple channel memory controller? What's your budget for the memory?
I know this might not be possible but I'm wondering if you can uses two SLI cards, but use the on board port to push the output video. I have two 9800 GT cards with dual DVI connections. The motherboard has a HDMI output and I would like to hook this pc to my HDTV. I can hook the the on board port just fine but the system doesn't use the graphic cards at all. Is their a way to make the graphics cards work when their ports are not in use? Thanks in advance!
2 X 9800 GT
1220 modular power supply
Dual core AMD 3.2 GHz
2 X 500 GB hardddrive
4 GB of RAM
obviously it wouldn't work. you cannot expect the graphic card to output the display to onboard HDMI port right? it's time for DVI to HDMI converter.
How do i fix or enable my system board Dell Latitude C640 on my laptop ?? Question US Marine in Iraq needs help azap!!!!!!!Sempre Fi USMC
You'll have to explain what is "system board" and what exact problems you're having.
Hello all I m new here almost as new at poking around inside my computer at this point its nothing lost nothing gained I have read several hundred posts of others who also fell victim to these substandard machines An e machines label wont be on my desktop again even if its case is blotted out with whiteout Anyway enough rant I m here for your help I have an model T amd athlon failed board victim Unknowing emachine, 754/478 socket replacement, of power supply that took the motherboard with it originally a - bit Unknowing victim of emachine, board replacement, socket 754/478 Mhz gb x machine msi MotherBoard I have looked at options and due to purpose or use of it I remain torn as to the best way to replace it seems Unknowing victim of emachine, board replacement, socket 754/478 Cputopia com On Sale has a motherboard basic single core board processor and processor fan for a Unknowing victim of emachine, board replacement, socket 754/478 bit over a hundred dollars dependent on options selected they also have a box case processor board and power supply for around dependent upon how equipped while the power supply upgrade is at one page its at another No big deal about that Anyway my other option is to get a sole independent board with the same socket as my oem processor motherboard and reuse my Atlon Processor - HD - DVD-Cd and new windows program as such Now the crux of the problem is I have seen T quot s listed here and elsewhere as having come from the factory equipped as socket and processor as well as How do I know or how can I tell which one I have I need to compare performance of the T - socket to the Sempron quot its been suggested this Sempron also comes in a variety of speeds and cores some better some worse than the Atlon it is dependent on the encoded processor suffix quot No description of such is available with the advertised replacement board and case at cputopia and I certainly don t want to go down or backward in speed or performance There are no performance specs advertised with this Cputopia com replacement board case cpu fan or other optional parts available either essentially no sepec no matter what I buy of the sempron All replys will be appreciated my budget doesnt give me room for errors do it once and do it right the first time wish I had been this cautious when I bought the emachine but budget was not as bad as now come Halloween I m gonna put lipstick on it put it outside and call it a pig with a big emachine billboard Regards to all here Leo nbsp
Dude, get a grip. I know less about computers now than before I read your post.
I thought that socket 478 was Intel (Pentium Celeron), now I come to find out that it's AMD.
An AMD Sempron 3000 only comes in one speed, if it's another speed, then it has a different number.
All of the s*** you mention is beyond obsolete, so maybe it's time for a whole 'nuther computer. Please, I heartily suggest that you avoid attempting to build a machine, at least in your current state of mind.
I don't think that any of us here are really equipped to deal with the anxiety, angst, or incoherent and rambling thought patterns you have exhibited thus far, let alone what you're trying to pass off as sentence structure.
BTW, my Emachines T-5026 just reached its 5th birthday. If you'd like to check in and wish it many happy returns, (pun not intended), here's the link; http://www.techspot.com/vb/topic143315.html
I would argue that it is not really possible to be an "unknowing victim" of Emachines.
You bought it because it was cheap, cheap s*** breaks. So where's the surprise, the mystery, or the unpredictability?
I've got an old ECS Elitegroup PF21 extreme motherboard. Now ever since I reformatted I have had no sound from my on board audio. The only way I have been able to was through my USB headset. I've never formatted a computer and it was my first time. Everything works perfectly fine and I have no problems other then this. Does any one know what could have gone wrong?
Download the drivers from the motherboard's support site here
The mother board is an ASUS P5Q? I know the adapter is working because I can hook the cable that comes from the case to another sata slot shut down turn the enclosure on and boot and I have a third hard drive. But that is not how I would like to do it. If the mother board would recognize the enclosure it would give me an icon in the tray to shut it off and I would not have to reboot to back up something.
Thank u for any help
I have about 5 choices for motherboards here and all of them are within my budget. But all these mobos seem to have fairly the same reviews. So can you please help me decide? BTW I do plan to overclock my system.
- Gigabyte GA P55MUD3
- ASUS P7P55 D
- Intel DP55KG
- MSI P55 GD65
- Gigabyte GA P55M UD2
Probably the MSI would offer the best all round feature set. All would offer basically the same stock performance.
I'm personally not a great fan of MSI, but that's because of personal experience with their P35/P45/680i and 780i boards. Haven't worked with a P55 based board as yet (too expensive in this part of the world) so as with the other choices I would seek out customer reviews as a basis for comparison in addition to published spec sheets and reviews.
I have a problem and I think it s memory related I read the post about quot Dual-Channel Memory in Single-Channel Motherboard quot But it didn t help plus it was memory channel Dual board? single in Channel from Here s my computer it s old I know I don t have the money to upgrade all of it - Intel Pentium D GHz - EVGA GeForce GS MB GDDR PCI Express - Intel D GGCL ATI Socket Dual Channel memory in single channel board? MicroATX Motherboard - GB x MB PC DDR MHz CL Memory - Ultra -Watt power supply - Windows XP bit I recently bought a memory upgrade GB x GB -Pin DDR SDRAM DDR PC Dual Channel Kit My computer worked fine minus the small memory amount before I installed the new memory After I installed the new RAM my computer posted got to the windows splash screen got to the log in screen let me log in then loaded the OS While loading the OS and launching other start-up programs my computer froze I restarted many times and it fixed it It never got past a few seconds after loading the OS and a few programs I reinstalled my old memory and it worked fine again without a hitch What is the problem Is it the fact that the new memory is dual channel and the motherboard is single channel I re-read the specs of my mobo and it said that dual channel is optional However when I go to the BOIS menu F on startup it says quot single channel mode quot whith the new dual channel kit is in Is there something in the BIOS I should change Something to download Please Help Thanks in advance - Veng nbsp
Well, I can say I solved my own problem.
After I spent the last 4 hours trying to find the problem. I ran a bunch of mem tests, cleaned the mem slots, etc... It turns out it wasn't a hardware issue at all. I was wiggling my mouse on start up and noted the time it froze... and every time it froze an application was launching in the system tray.
Turns out it was Norton F'ing Anti Virus....
The second it launched the computer froze. So I booted in safe mode and disabled the start up and all other functions of Norton. Rebooted in normal mode, and sure enough, it worked! Without a hitch!
Now here comes the Beach of it. Since I couldn't uninstall Norton because I disabled it (i.e. nothing would run because all the extensions, shells and services for it were dead), I rebooted in safe mode to uninstall, BUT Norton doesn't work in safe mode... WHAT!? The damn program specifically states in a condescending dialog box that you "must reboot in normal mode to access Norton... blah blah blah"
What kind of Virus program doesn't let you access it in safe mode? Isn't that the point, to run a virus scan in safe mode? Piece of crap! But anyways, I digress.
So now I finagled a way to run in normal mode without Norton launching to uninstall it. Uninstalling as we speak, actually.
To answer my own question:
Yes, dual channel kits work in single channel boards (Just make sure you uninstall Norton before you put the new RAM in, haha).
p.s. After this... I'm switching to McAfee or some sh*t.... Christ. YOU HEAR ME NORTON!? GO SUCK A FAT HAIRY LOBSTER C*CK!
I need to order my mother a 22 inch monitor but I'm not sure which one to order. I would prefer to order it from newegg but if their is a good deal on one somewhere else tell me! It will have to be connected by d sub not dvi so I'm not sure if image quality is a very big deal. She will use it for browsing and 2d games such as zuma and bejeweled as well as browsing but her ancient pc only has integrated graphics so will it handle it fine?
I was thinking that these ones looked good but I'm not sure which will be most reliable.
Edit: Ahh yes of coarse I forgot to mention the budget, 150 to 170 would be ideal.
Any help would be appreciated.
Hey im thinking of upgrading my pc so i can just hook it up hdmi to my tv. Ive looked around and my mobo only supports pci cards, which when i checked the hdmi out cards were a bit pricey. It also has one agp 4x slot but cant find a decent card in that department.
Should i get a new MOBO instead with an integrated hdmi out because another benefit of that would be a better CPU and ram support (mine currently says max memory is 1 gig on crucial, but i looked up the serial and says it supports 2) I do want a faster and stronger rig but dont know if all my components would matche up with a new board.
What would i need to look for in terms of choosing either of these options. My case apparently supports uATX (micro).
Depends on your cash situation. Sounds like your PC is a bit old so a refresh would be in order. Particularly if you have a nice TV, you are probably going to want to use the PC for gaming/media.
Could someone give me a link to a motherboard beeper as this board does not come with one?
thank u Nick
How about this one? http://www.cwc-group.com/8ohm.html
I have a Dell Inspiron 8600 laptop. At the moment, I have no OS running, as I am trying to reformat my computer. In doing so, I received the BSOD message: partmgr.sys - Address F87C04AB base at F87BE000.
Do I need a new hard drive?
Any help is greatly appreciated. Thanks in advance.
What Windows CD version are you using to boot with and did you set the CD as the first boot device? I could be wrong but maybe you aren't booting correctly.
Hey all I am totally new to overclocking or working with the inside of a computer in everyway I watched my friend put this computer together for me he recommended what parts I buy etc about years ago The only thing I did was to pop in the RAM Ok so basic questions I have then I will list my specs Is it worth it for me to overclock I am super tight on cash and just want to buy some new RAM and get this thing faster for about - months till I can afford a new computer I am considering buying gb of Kingston ValueRAM GB x GB -Pin DDR SDRAM DDR PC System Memory Model KVR X C AK G - Retail for bucks thats my budget unfortunately So is it a good idea Any advice on some basics of how I can begin to overclock on this board Specs Neo4-F 3200+ K8N on for to Looking AMD advice board my OC follow Name AMD Looking for advice to OC my AMD 3200+ on K8N Neo4-F board Athlon Code Name Venice Brand ID Package Socket Technology nm Core Voltage V Family Model Ext Family F Ext Model F Stepping Revision DH-E Instructions MMX DNow SSE SSE SSE x - Core Speed MHz Multiplier x Bus Speed MHz HT Link MHz Looking for advice to OC my AMD 3200+ on K8N Neo4-F board L Data KBytes -way L Inst KBytes -way Level KBytes -way Caches Size KBytes Descriptor -way set associative -byte line size L Cache Size KBytes L Cash Descriptor -way set associative -byte line size L Cache Size KBytes L Cash Descriptor way set associative -byte line size Motherboard Manufacturer MICRO-STAR INTERNATIONAL CO LTD Model MS- version Chipset NVIDIA nForce Rev A Southbridge NVIDIA nForce MCP LPCIO W EHF Brand Phoenix Technologies LTD Version PG Graphic Interface Version PCI-Express Link Width x Max Supported x my card NVIDIA GeForce GT with nm technology Core MHz Size MBytes Shaders MHz Memory MHz Type DDR Bus Width bits Memory x MBytes Kingmax Semiconductor slices or w e you call em Type DDR Channels Single Size MBytes DRAM Frequency MHz FSB DRAM is CPU CAS clocks RAS to CAS Delay tRCD clocks RAS Precharge tRP clocks Cycle Time tRAS clocks Bank Cycle Time tRC clocks Command Rate CR T DRAM Idle Timer clocks Max Bandwidth PC MHz My current RAM timing tables Frequency of JEDEC MHz CAS Latency of JEDEC RAS to CAS of JEDEC RAS Precharge of JEDEC tRAS of JEDEC Voltage for JEDEC V Frequency of JEDEC MHz CAS Latency of JEDEC RAS to CAS of JEDEC RAS Precharge of JEDEC tRAS of JEDEC Voltage of JEDEC V I hope that is all the information necessary It took me a long time to type it all out Too bad this CPUZ program doesn t have an easy copy paste text file Please let me know if there is anything else I need to provide that can help out Thank you so much to anyone out there willing to take time to help me out nbsp
HI calio, welcome to Techspot
what is it you want to accomplish with OC'ing? is it for gaming performance?
Hey everyone I m back with another problem This time it s in my personal laptop So about weeks ago a friend of mine installed GB RAM into my nv4_disp Help BSOD infinite loop with laptop After a couple of days with the RAM I turned on my laptop and find my screen flashing red Parts of the screen were pixeled red After backing up my files through safe mode I brought the computer to the college tech support They figured Help with nv4_disp infinite loop BSOD it s a driver problem so they updated my video driver Into what I cannot remember The problem randomly appeared and that forced me to format and start fresh So a new problem arose As the title suggested I randomly get the nv disp infinite loop BSOD Sometimes Help with nv4_disp infinite loop BSOD my screen would just freeze and not do anything Sometimes the screen flashes Help with nv4_disp infinite loop BSOD but I can still move my mouse pointer And it hasn t really been too friendly when I open the only two games I have in my computer in an attempt to see how bad the damage is I looked up some solutions online which included uninstalling and reinstalling drivers After a few attempts of that with the update the NVIDIA website provided I rolled back my driver into driver version So here are some things about my computer Model Dell Latitude D System Microsoft Windows XP Professional Service Pack Computer Intel R Core TM Duo CPU t GHz GHz with GB of RAM Driver Details Currently NVIDIA Quadro NVS M Driver Version Personally I wouldn t mind this problem But I have a final project for a class where I need a video presentation and I am using Pinnacle Studio I m not sure if it s just me being retarded and missing a driver to install but I m pretty sure I reinstalled everything after formatting my computer Any help is greatly appreciated If any more information is needed please tell me so I can attempt to provide you with correct information not completely tech savvy for a computer engineering major ironically nbsp
First of all you have to make sure that the 667 memory and the nvidia driver is compatible with your Dell laptops model, and you should use the Nvidia video and chipset driver from Dell and not from the nvidia site. You can up the shared video memory to 256MB maximum
I plan to build my own computer since the DELL gx280 have given hard time to me. The i5 process would like to be my system in this time. Here is the list what I estimate on ebay (mostly)
CPU: Intel Core 2 q9400 - $190 OR i5 - $200
CPU Fan: ???
M/B: Asus P5KPL-CM - $60 OR Intel DP55WB - $100
Ram: Kingston 4gb DDR2 800mhz - $60 OR DD3 -$70
Video: ATI Radeon 4850 - $124
HDD: Western Digital 500GB 32mb, 7200 rpm - $56
DVD-RW: LG DVD-RW - $31
CASE: standard ATX Tower with 500w power - $45
I have no idea about a CPU cooler. What I heard that the CPU cooler should be different ones depends on the M/B and case.
What kinds of cooler can I use for my system? Also how am I able to firgue that out?
Fast Healthy Weight Loss
I plan to build my own computer since the DELL gx280 have given hard time to me.
Ive got a toshiba laptop and i went to sleep watching a dvd on it.
It fell off my bed and now when i type it doesnt keep up to speed even if i plug a different keyboard into it and use that.
I constantly have to go back and r-type everything i do
Any suggestions on how to possibly sort it out myself?
Dropping a laptop can do all kinds of damage... If you're not comfortable taking laptops apart, you will have to take it to a computer repair shop
I have ( and currently using) onboard audio for my sound output. It is Realtek onboard audio for an ASUS MOBO. Its 8 channel audio and im purchasing a sound card. It's a Creative Labs 7.1 sound card with EAX. Is it a good upgrade? I'm sure it is but im just looking for some quality advice first
It's not quite the same as switching from on-board video to a discrete video GPU card, but it's the best comparison that I can think of. At least with the video you can see a significant difference. With audio it's a little harder to hear a difference, especially since you need a good speaker set to reference from. If your CPU is a little down in power then you'll notice some improvement in games too. A lot of the crackling and poorly addressed effects will be cleaned up. For me, I was also able to hear other players further in a map than I could with on-board audio.
One thing to add to this brand of card that you're buying: The manufacture makes different audio profiles available in their software for this card. These profiles are designed for entertainment, games, etc... Enabling or disabling a profile might make the difference if EAX is available in-game or not. If it does not come with the manufacture's software, I would suggest looking for a disc ISO since this software would be necessary to configure the card for these options. And the updates at the manufacture's website might be incomplete.
gigabyte X48TDQ6 mobo
2X2gb ocz ddr3 1600mhz
i have run my system for about a year with q6600 cpu with no problems with this mobo,memory,graphic card.
yesterday i have changed my cpu to qx9650 with the intel stock cpu fan. when i play games after 20 minutes i get bsod and the system reboot even in regular use on desktop.
the cpu temp in idele is about 27 deg. (not seems beacuse overhit)
on bios everythind on standart/auto (no o.c).
i upgrade my bios revision.
the bsod is "not less or equel" something:
Problem Event Name: BlueScreen
OS Version: 6.0.6001.2.1.0.256.1
Locale ID: 1037
Additional information about the problem:
OS Version: 6_0_6001
Service Pack: 1_0
thanx 4 any help.
look on the box the CPU came in, or run CPU-z and see what the revision is. If it is an E0 you need BIOS F8D beta to run that CPU. At least that is what Gigabyte is showing for that CPU on the GA-X48-DQ6 mobo. I couldn't find a GA-X48-TDQ6 mobo listed on their site. Typo or wrong region possibly? Also check windows updates. There may be something for that CPU, or maybe you need more than SP1 on your OS? Your BSOD screen by the way is referencing a failure to read paged memory.
I came home from a vacation after summer everything was my and Just computer new installed now processor gets BSOD's 955) (X4 already Just installed new processor (X4 955) and now my computer gets BSOD's set up in my computer except that I had sold Just installed new processor (X4 955) and now my computer gets BSOD's the Phenom X before I left which left my computer well CPU-less When I came back I bought a new Phenom X So I installed the processor and the stock heatsink and fan that came with it No I m not overclocking the CPU No I m not doing anything else out of the ordinary I ve had this processor installed for at least a week now My computer will just randomly get the blue screen of doom or death and just restart I NEED TO KNOW HOW TO FIX THIS PROBLEM I can t take this anymore I downloaded a program called BlueScreenView by NirSoft so that I can view the BSOD error codes etc etc So I can tell you exactly what BSOD happened and at what time I just need to know how to fix it The three BSOD s I ve been getting are DRIVER IRQL NOT LESS OR EQUAL x d KERNEL MODE EXCEPTION NOT HANDLED x e and PAGE FAULT IN NONPAGED AREA x HOW CAN I FIX ANY OF THESE nbsp
Sounds like a bios update might help. Version 2606 appears to be the latest for Vista if you have 32 bit.
hi i have been getting random bsod when playing games and sometimes watching videos online says video driver stopped responding sometimes bsod sometimes it recovers says to upgrade drivers which i have doesnt help it has done this with every driver i have installed.
vista home premium
asus p5q pro
ati 4780 512
2/2g corsiar dominator
e 8400 @ 3.00
pc power +cooling 750 w
2/300g vel raptor hd raid o
hers the mini dump please help
Your video card may be over heating
Hi everyone I am having problems with the sound card on my ACER PC and I asked the people I brought my 2nd hand ACER Veriton 3500v from what they did to the PC re formatting the HDD and loading it up with WIN XP Pro again. Apparently they used a program called KIlldisk that wrote 0?s to the HDD before they formatted it? They formatted it in FAT32 then loaded the op system.
As the sound card etc was working o?k prior to them doing this would it have been possible that using KIlldisk has turned ?off ? some how the sound card etc? And if so how can I turn it back on? I keep getting a msg Multimedia Audio Controller not loaded code 28 can you help.
have you re-installed the sound driver?
also,go into your BIOS set up and enable the onboard sound.
Can t seem to find any solutions to this ongoing problem Currently Kernel_Mode_Exception_Not_Handled_M BSOD, using WinDbg to debug issue however I am not having much luck Here are the two latest BSOD Microsoft R Windows Debugger Version X Loading Dump File C WINDOWS Minidump Mini - dmp Mini Kernel Dump File BSOD, Kernel_Mode_Exception_Not_Handled_M Only registers and stack trace are available Symbol search path is msdl Executable search path is Windows Server Kernel Version Service Pack MP procs Free x compatible Product LanManNt suite TerminalServer SingleUserTS Built by srv sp gdr - Machine Name Kernel base x PsLoadedModuleList x af c Debug session time Wed Jul GMT- System Uptime days Loading Kernel Symbols Loading User Symbols Loading unloaded module list Unable to load image navex sys Win error n WARNING Unable to verify timestamp for navex sys ERROR Module load completed but symbols could not be loaded for navex sys Bugcheck Analysis Use analyze -v to get detailed debugging information BugCheck E c b d ba b Probably caused by navex sys navex f ba Followup MachineOwner --------- kd gt analyze -v Bugcheck Analysis KERNEL MODE EXCEPTION NOT HANDLED M e This is a very common bugcheck Usually the exception address pinpoints the driver function that caused the problem Always note this address as well as the link date of the driver image that contains this address Some common problems are exception code x This means a hard coded breakpoint or assertion was hit but this system was booted NODEBUG This is not supposed to happen as developers should never have hardcoded breakpoints in retail code but If this happens make sure a debugger gets connected and the system is booted DEBUG This will let us see why this breakpoint is happening Arguments Arg c The exception code that was not handled Arg b d ba The address that the exception occurred at Arg b Trap Frame Arg Debugging Details ------------------ EXCEPTION CODE NTSTATUS xc - The instruction at quot x lx quot referenced memory at quot x lx quot The memory could not be quot s quot FAULTING IP navex f ba b d ba ffb c a push dword ptr ecx AC h TRAP FRAME b -- trap xffffffffb ErrCode eax ebx e ecx edx esi e caa edi e e a eip b d ba esp b ebp b iopl nv up ei pl nz ac po cy cs ss ds es fs gs efl navex x f ba b d ba ffb c a push dword ptr ecx AC h ds ac Resetting default scope CUSTOMER CRASH COUNT DEFAULT BUCKET ID DRIVER FAULT SERVER MINIDUMP BUGCHECK STR x E PROCESS NAME vbda exe CURRENT IRQL LAST CONTROL TRANSFER from b d e to b d ba STACK TEXT WARNING Stack unwind information not available Following frames may be wrong b b d e e d e e e a navex x f ba b bc b d b e e f e navex x e e b d b a c e d ff b ac navex x e b b a e e f f e dd acd b ac navex x a c b b b a e e e d c e dd acd navex x ce b c b d navex x d e b c e e d c nt ExFreePoolWithTag x a STACK COMMAND kb FOLLOWUP IP navex f ba b d ba ffb c a push dword ptr ecx AC h SYMBOL STACK INDEX SYMBOL NAME navex f ba FOLLOWUP NAME MachineOwner MODULE NAME navex IMAGE NAME navex sys DEBUG FLR IMAGE TIMESTAMP b c FAILURE BUCKET ID x E navex f ba BUCKET ID x E navex f ba Followup MachineOwner --------- Microsoft R Windows Debugger Version X Copyright c Microsoft Corporation All rights reserved Loading Dump File C WINDOWS Minidump Mini - dmp Mini Kernel Dump File Only registers and stack trace are available Symbol search path is msdl Executable search path is Windows Server Kernel Version Service Pack MP procs Free x compatible Product LanManNt suite TerminalServer SingleUserTS Built by srv sp gdr - Machine Name Kernel base x PsLoadedModuleList x af c Debug session time Wed Jul GMT- System Uptime days Loading Kernel Symbols Loading User Symbols Loading unloaded module list Bugcheck Analysis Use analyze -v to get detailed debugging information BugCheck E c b ef a b a a c Probably caused by hardware afd AfdTransmitFile a Followup MachineOwner --------- kd gt analyze -v Bugcheck Analysis KERNEL MODE EXCEPTION NOT HANDLED M e This is a very com... Read more
you might want to post this in operating system and software.
i would suggest reinstalling windows myself.
After cleaning my computer free of dust, I reinstalled all the necessary parts to get the computer working again. When I was to put the processor back, I found that:
1) the pins were a little bit bent but I think they bent back in place when i put it back
2) In order to put back on motherboard, i had to remove the processor from the fan and that means the thermal paste was somewhat removed.
So the biggest question I have is: Is re-adding thermal paste necessary? and is this why its been shutting down?
Just got a gift from a friend. A Panasonic CF48E. Put a new HD in it, Installed WIN XP pro, and was happy... NO sound.. Looking at the Control panell, looks like the Multimedia Audio Controller has a ( ! ) in the yellow circle. Downloaded what seems to be the correct drivers for it, ir starts to install but mid installation I get the Blue SOD, that says portcls.sys, and it shuts down, and restarts the laptop real fast ( no time to read what the blue screen says..
Anyone see that problem before?
Any solutions? I read all kinds of suggestions, but none work.
i was redirected here from the BSOD help as it may be a hardware problem I have a Gateway laptop running Windows XP media center edition with SP and whenever i try logging in it either boots me before loading up or within the first - seconds i have tried running in the last good configuration and safe mode but they dont work it just shuts off without a blue screen the screen has had trouble in the past and doesnt work well now so it is plugged into a computer monitor could that be the reason its having problems the thing is it has used this monitor for a good months at least before having problems I lent the laptop to my girlfriend so she could have a computer in her room with internet then it started doing this there is nothing of major importance on this computer so i really just wanna do a full system restore or repair but i dont know how The system wont stay on long enough and i dont have my cd key either i did just have one successful log in with an error report i am doing the list of things in and log hardly can BSOD microsoft says to do currently looking for updated drivers EDIT BSOD d then got back in and performed a BSOD and can hardly log in quick scan found nothing doing a full scan in hopes it finds something helpful nbsp
Memory or failing hard drive... You may have to take it in for service. What kind of scan, memory?
Recently i suffer from BSOD on a daily basis. I can't put any finger on the reason, cause i see no rule. I suspect Outlook 2003 or AVG.
I have attached the the dump file. I dont know how to read it.
What hardware or software did you install just prior to getting bsods?
Your current minidump shows "Stop 0xBE"
Which indicates that a driver attempted to write to read-only memory.
? A Stop 0xBE message might occur after installing a faulty device driver, system service, or firmware. If a Stop message lists a driver by name, disable, remove, or roll back the driver to correct the problem. If disabling or removing drivers resolves the issues, contact the manufacturer about a possible update. Using updated software is especially important for multimedia applications, antivirus scanners, DVD playback, and CD mastering tools.Click to expand...
Since you suspect AVG and since others have reported issues with AVG8, you may wish to try (Free products, available here)
Avira ... http://www.techspot.com/downloads/41-antivir-personal-edition.html
or Avast ... http://www.techspot.com/downloads/223-avast-home-edition.html
Because of reported security issues, I do not use Outlook, so others will need to assist you there.
Hello... I'm new here.
I was using my laptop and there were updates. So I installed them before shutting down... but after I checked up on it again, there was a BSOD. The error was Stop Error 0Ũ00000050: PAGE_FAULT_IN_NONPAGED_AREA. Somebody help me please. My laptop is a Toshiba Satellite A215-S4747.
Re: 0x50 errors
Defective memory (including main memory, L2 RAM cache, video RAM) or incompatible software (including remote control and antivirus software) might cause Stop 0x50 messages.
? If you added new hardware recently, remove and replace the hardware to determine if it is causing or contributing to the problem. Run diagnostics software supplied by the hardware manufacturer to determine if the component has failed.
? Stop 0x50 messages can also occur after installing faulty drivers or system services. If the file name is listed, you need to disable, remove, or roll back that driver. If not, disable the recently installed service or application to determine if this resolves the error. If this does not resolve the problem, contact the hardware manufacturer for updates. Using updated drivers and software is especially important for network interface cards, video adapters, backup programs, multimedia applications, antivirus scanners, and CD mastering tools. If an updated driver is not available, attempt to use a driver from a similar device in the same family. For example, if printing to a Model 1100C printer causes Stop 0x50 errors, using a printer driver meant for a Model 1100A or Model 1000 might temporarily resolve the problem.Click to expand...
Can you boot to safe mode? (f8 after power up - and after bios password if enabled).
From safe mode, right click on my computer, click on properties, click on "hardware" tab, click on "device manager" button.
Check for yellow or red flags... roll back drivers these drivers if possible.
I would like for you to check for memory errors as well...
Use Memtest... See this tutorial... http://www.techspot.com/vb/topic62524.html
Since these errors can have many causes...
I would like for you also to go to the Virus and Malware board, and follow carefully the 8 steps.
See here http://www.techspot.com/vb/topic58138.html
Until we can get a stable system for you, you may need to download the tools to another computer, and then burn them to a cd for use on the Toshiba.
When I try to use winrar to unrar a compressed file or something like that, it appears de blue screen and I hear the sound of the hard disk powering down I think (it's the same noise that the hard drive makes when I turn off my computer)
This problem started few days ago when I installed Jdownloader but I don't thing that the problem is related to it.
History: a year ago I got 2 hard drives in raid 1 mode and they failed but the disks are ok. I think that failed the motherboard's raid controller or disk controller. I've got the same mother with a diferent hard disk for a year ago.
Sounds like a memory problem... Test the system memory
i am having a little bit of an inconvenience with this pesky bsod error message it reads hardware malfunction call your hardware vendor for support NMI Parity check memory parity error the system has halted i have been skimming through forum threads from around of people having a similar problem but they all had dells and it occurred mostly in laptops i have got a heavily modded hp d small form factor desktop in fact the malfunction error hardware Bsod only thing i have that has anything to do with dell is my two monitors and a little CAT wired network Bsod hardware malfunction error pci adapter i installed a gig of ddr Kingston ram a agp video card and that dell net adapter all at the same time the problem started happening like a couple of weeks after that the old thread that i found is pages long and i haven t had time to read the whole thing i think it is that netcard but i dont want to open up my case take it out and the problem still occur so i wanted to know if anyone knew whether it is or isn t the problem b c like i said i upgraded other stuff at the same time thanks zach nbsp
The parity check error is a likely pointer to defective (or poorly seated) memory,
Please run memtest... See this tutorial... http://www.techspot.com/vb/topic62524.html
Note that memtest should be allowed to run a minimum of 7 full passes. Each pass has eight tests of inclreasing complexity. This means that it will run a while. Allowing it to run overnight should give it enough time. Since it runs from its own environment, windows bsod will not be a problem. Any errors means you have one or more defective memory modules. If you find errors, you may wish to run Memtest on each module. If you bought the memory as a kit, you will likely need to RMA both modules.
Please also include some of your minidumps as attachments to your next post.
The name and model of your MB would also help. Some MB's are notoriously touchy about the ram that you use. If your Kingston ram is not on the MB maker's list for your board, this may be the problem.
My on board video adapter is non functional. I am trying to replace it with a PCI video adapter but the issue is that I cannot see the screen in order to gain access to the BIOS and disable the on board video adapter. Anyone have any other ideas other than replacing the motherboard?
I have confirmed that the video adapter is broken at the motherboard.
It is a Emachine desktop.
so you can't see any display?
Hi I own a Intel Pentium D CPU 2.80Ghz running on 2 core processers it is a HP PC m7360n. And Running on Upgrade Version of Windows Vista Home Premium. I have 300watts Powersupply running with Radeon x1600 512MB PRO Version. Then I "want to upgrade to 700watts" Powersupply with out any issues from "300 watts power supply". Is it safe enough to install the powersupply? Also I gotten today Radeon HD 3870 512MB wich is require to upgrade 450 or higher? Is it ok go and head install the power supply? Or can my HD 3870 can or can't? run 300Max which I know is unsafe. :/ I don't want to take any chances. Or not I just goto a local computer store and pay for them to install it.
I would go ahead and install the new power supply. You should have no issues as long as the new power supply has all the proper connectors your equipment needs such as a PCI-E connector (for the graphics card) and a 700W should. If you are worried about a 700W being too powerful for your old setup, don't be. Your PC will draw only what it needs from the power supply even if you install a 1200W PSU.
Each type of PSU connector can only be connected to its own type and they are keyed so it is hard to install them backwards. After installing all the new power connections, double check the data cables. Sometimes they can get loose by accident when you are installing the other cables.
If you haven't bought it yet, make sure you get a good quality PSU. This is one piece of equipment you don't want to go too cheap.
I've been playing EVE online on my HP510 fine for several months when all of a sudden I am getting a blue screen with reference to Page in non paged area - further down the screen it mentions ialmdev5.dll. The machine uses a Mobile Intel 915GM/GMS 910GML Express Chipset for it's graphics and has worked fine the last couple of months.
I have downloaded the latest drivers from the HP site site, and have run 3x different memory test programmes - none of which found an error since I understand there can be RAM issues which cause this.
I am a little confused what could suddenly stp the thig from working - there was no patch and I have not installed new software,
I'm at a bit of a loss what to do now - any ideas or help?
ialmdev5.dll is an intel chipset driver. Go to HP's support site under your computers model and download and install the Intel Chipset drivers
Hey people Now i know theres probably alot of threads on this topic already but this problem is a Just sick bsod problem - this ATI of about little different to what people have been describing I just helped my friend build his computer and i recommended all the pieces and put it all together installed everything etc Anyway about - minutes into a game it ll crash to the bsod Here s the interesting bit I used to have an ati card myself and it would do the exact same thing with every game i played My friends on the other hand so far its only doing it on NFS - Undercover and the latest Prince of Persia My hypothesis is the game loads into the ram but somehow or another the ati drivers do something crazy and stop unused data from being discarded Just about sick of this problem - ATI bsod out of the ram so it fills up the ram Just about sick of this problem - ATI bsod then the pagefile then crashes to bsod Thats my theory If anyone has any idea of what Just about sick of this problem - ATI bsod the hell is going on here it ll be greatly appreciated Here s his pc s specs case - nzxt tempest psu - antec truepower quattro w mobo - asus m a deluxe cpu - amd phenom am ghz ram - corsair ddr x gb mhz model no AL-TWIN X - C DF graphics - gigabyte hd hhd - seagate barracuda tb os - windows vista ultimate x sp I came to that hypothesis because when i had my ati card depending on the amount of ram the game used greatly factored how long it would take to crash to bsod I ve been looking around and so far i ve found these theories of how to fix it ati drivers werent tested properly on -bit vista the latest CCC drivers screw up big-time its dodgy memory There s alot more i could list but they re just a load of crap i m pretty damn sure its not the memory since we played crysis warhead on it for hours straight It could be the CCC but i dont think it is if it was i think it d be more of a driver problem then anything else which means uninstalling CCC won t make a difference I m really thinking it s a vista -bit problem but i cant find out until he brings the comptuer back over to my house So does anyone think they know whats going on here I m not a junior in computer repair i ve built and repaired plenty of laptops and computers to know what i m doing but i ve never needed to use a debug program so i might need some insight into how to do that if anyone needs a debug report or whatever Again thanks nbsp
Try updating the ASUS motherboards bios
After fitting 8gb of crucial ram in my pc, i went back to crucials website to try out the memory scanner tool just out of curiosity. As soon as i try to run it it gives me an instant BSOD!! This happens on my brothers pc also. He has 8gb of diffrent brand ram. Any one else have/had this problem?
Its not really a big issue, im just curious.
Does this really matter? If everthing else works ok...
i hope you guys can help me....i'm really having a hard time figuring out why pc goes blue screen of death whenever i play with garena(gg client)....when i had vista...it always crashes(bsod) even on 1v1!!!!i switched to xp and it still crashes 6 out of 10 times.....but when i play on my own...it doesnt bsod... the worst thing it can do is shut the program....only happens rarely.....
i have a laptop computer with:
T2050 1.6 ghz
intel gma 950
i hope you guys can help me with my problem.....thanks!!!
The laptop may be overheating...
Wondering if anyone can help figure out why I'm getting this error.
CHDAU32.sys Address A65CDFEC base at A65BD000
DATE STAMP 4851C198
My laptop is a Lenovo Thinkpad T400 model 2765T6U. I purchased it in January of this year and I'm upset that there is already a major error.
Other specs: Intel Core 2 Duo P8400 @2.26Ghz with Intel Turbo Memory (2GB)
Cache Memory L2 Cache 3MB
Ram: 2GB DDR3 SDRAM 1066mhz PC2-8500
HD 160GB 7200 rpm
Graphics Card: ATI Mobility Radeon HD3470
OS: XP Pro Service Pack 3.
Since it was just purchased there have been no hardware changes. Thanks for the help.
Read: All about Minidumps and diagnosing them
Please check: Start-> Run-> C:\Windows\Minidump
For any Minidumps to Attach
Hey all, 2 days ago i bought a sapphire 4850 x2. i wouls just like to know something.
would putting this card in a 680i board be a problem?
would i not see as good of perfprmance as an intel board?
would there be any crossfire conflictions ?
Its an awesome card and dominates all of my games. Its just on crysis 1680x1050 all on very high i get 20 fps. I dont know if crossfire is working in the game or not or if it is a driver issue or if it because of my board.
Your comments a much appreciated
probably no conflicts, probably driver issue, try reinstalling or use a modded one like DNA, OMEGA, Xtreme-G
Got BSOD with xcfe.sys address 93606F02 base at 93605000 datestamp 4899d276.
I am currently not able to get computer to post at all no other issues before hand
780g FullHD ASROCK
4GB (2X2GB) OCZ Ram
No idea what that is. Is the CPU fan running and can you hear the hard drive spinning? Remove all peripherals inside the computer (if it's not a laptop) then put them in one at a time, turning off the computer before installing the next peripheral, then on again etc. If the computer works without one of the devices then you found the culprit. Do the same with the RAM if you have more than one module. Could be a number of things. Also test the power supply with a multimeter or power supply tester. Let us know?!
Hi I got a new Inspiron laptop just a couple of days ago Its a T C D Ghz processor intel chipset with integrated graphics gb ram I had to reinstall vista after it went into Multiple BSOD a continuous loop - configuring updates shutting down confiiguring updates - after some windows updates None of the windows startup repair options worked Now after the reintall I am getting a lot of BSODs errors shown are IRQL Multiple BSOD NOT LESS OR EQUAL MEMORY MANAGEMENT REGISTRY ERROR and PAGE FAULT IN NON PAGED AREA most common being memory mgmt chkdsk shows no errors the memory test in the startup repair shows hardware errors with a msg that I need to contact the manufacturer Have updated all drivers and the bios but all that has changed is that the number of bsod instances have reduced from per hr to or Also in several instances the BSOD is preceded by services such as RPC Bluetooth wireless shutting down with the event viewer showing registry is corrupted Not sure what the problem is though have a feeling its something to do with a faulty RAM nbsp
If you want to test your RAM use memtest:
1. Go to www.memtest.org and download the latest ISO version. It is free and perfectly safe.
2. Burn to a CD.
3. Place CD in your drive and reboot with CD in drive. (You might have to place your drive as first bootable in your BIOS) The test will take over.
4. Let it run for a LONG time. The rule is a minimum of 7 Passes. There are 8 individual tests per Pass. Many people will start this test before going to bed and check it the next day.
5. If you have errors you have corrupted memory and it needs to be replaced.
6. Also, with errors you need to run this test per stick of RAM. Take out one and run the test. Then take that one out and put the other in and run the test. If you start getting errors before 7 Passes you know that stick is corrupted and you don?t need to run the test any further on that stick.
Im working on my friends computer and it keeps crashing Specs MSI MS- Ver Intel Celeron Ghz MB Kingston PC New nVidia GeForce Mb AGP x GB Hitachi Hard Drive Sony DVD CD Burner watt Thermaltake PSU At first the on-board VGA stopped working I replaced it with a even reformat BSOD after Random AGP card and it worked fine for a month before it started having problems The original of the original ram sticks in bank stopped working Kept getting random BSOD s so I tossed the old Random BSOD even after reformat ram and left in the new Kingston stick Installed the new stick and it still BSOD s randomly They were very random but I got one written down x E xC x xB x IRQL NOT LESS OR EQUAL I thought Ram So I ran the stick on both DIMM slots with memtest multiple times and it found NO errors CPU temp oC at idle Random BSOD even after reformat cleaned heatsink applied AS still BSOD Next I broke the system down to the basics PSU CPU RAM Video card HD CD drive STILL BSOD Next I swapped out the PSU still BSOD Test hard drive with HDAT Hitachi drive fitness passed Reformat HD and reinstall Xp Pro not loading any Mobo drivers still BSOD Installed Mobo drivers minus nVidia drivers still BSOD Removed front panel USB connectors Swapped HD full format reinstall OS still BSOD Swapped Video card still BSOD BIOS is up to date only add-in card is the Video card I am at a loss spending wayy too much time on this thing Any help would be appreciated I know mini-dump files would be some help but I just re-formatted the HD again and havent reloaded the OS yet and im beat for now The only things I havent crossed out are the CPU and Mobo Are there any DOS based programs that I can use to test it The only boot disk I have ATM is Hirens Im guessing the Mobo may have crapped out especially since the on-board Video broke The on-board LAN works intermittently The system was built by another dude two years ago I dont see any damge on the Mobo Please help Thanks in advance nbsp
Sounds like the Chipset is knackered to be honest, it seems to be having problems across the entire spectrum, so I'd say it's the motherboard.
Hi all well i m hoping you guys can help I have recently purchased a new system i GTX and Msi Pro mobo with some ram of course I m getting random BSODs From what I can tell anyway I performed the memtest thingy all night last night with no errors I first installed XP sp on it and started getting BSOD randomly so I installed help new i7 Pro BSOD GTX260 MSI Windows bit which I have on it now however the same thing is BSOD new i7 GTX260 MSI Pro help happening I m usually quite good with these BSOD new i7 GTX260 MSI Pro help things but this time i need help I ve done the searches on the net but to no avail I dont know where to go next I m considering buying a test vid card for bucks just so see if it still happens with it installed but dont really want to Oh some specs Inno d GTX drivers - not oc d Corsair HX psu i - stock speed not OC d in any way MSI pro x -latest Bios crappy kingston gb ram all they had at the time Win Bit - fresh install build x WD Gb hdds in Raid Antec case As far as I can tell the ram is ok I ve tried changing the pci slot that the vid card is in but same thing Latest nvidia drvs for Win bit Hope to hear from you all soon nbsp
Please upload your minidumps so we can have them analysed.
I keep getting BSODs with either DRIVER_IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NON_PAGED_AREA.
Ive have attached two of the latest minidumps
System specs including OS & SP would help. I am looking at a dump right now, assuming XP sp3
Your error on the second dump was 0x50 ...
But the Widbg report points to Vista... so you are not running XP...
I suspect this information is still valid.
This kind of error is usually associated with a memory problem.
Download Memtest86+ from www.memtest.org
Let it run for at least seven passes and see what it comes up with.
There are 8 tests per pass, and it will take a while...
If you start getting errors, you can stop, and remove one stick ... test the sticks one at a time to isolate the issue.
If your memory comes up clean, we can explore other options, but this is the likely place to start.
These errors may be caused by one or more of the following:
* Hardware failure (memory, processor, or motherboard).
* Anti-virus software that is running on your computer.
* Drivers installed by third-party software.
To resolve these behaviors, perform one or more of the following: Replace the f...
To resolve these behaviors, perform one or more of the following:
* Replace the faulty hardware. You may be able to determine the faulty hardware by running diagnostics provided by the manufacturer. Please contact the hardware manufacturer for more information.
* Disable any anti-virus software that is running on your computer. If the STOP errors no longer occur, contact the anti-virus software manufacturer about a possible upgrade.
* Disable any third-party drivers that may be running. If the STOP errors no longer occur, contact the third-party manufacturer about a possible upgrade.Click to expand...
Your first dump showed a different error.... 0xD1 error and these are almost always caused by faulty drivers/buggy software.
the analysis points to ntoskrnl.exe which is too general to help. In another case, video drivers were at issue...
Are your video drivers updated?
Did your issues begin after starting some new activity? (like a new Game perhaps?)
Since both errors (0x50 and 0xD1) can point at drivers, this might be the place to start.
This is a problem I ve been having for some months now I ve tried to troubleshoot my entire computer from day one and I ve gotten rid of lots of different problems One problem remains wont BSOD after PC boot though Some times often during the night or other times where I m AFK for a longer period of time - hours maybe shorter I get an ugly BSOD on my screen After this BSOD my computer wont boot In order to make the computer boot up I have to manually flash the BIOS something that gets very annoying in the long run What happens is I shut it down removing the BSOD I then turn it back on but no components are responding The screen is black gets no signal the keyboard has no signal the num- and capslock lights doesn t respond and the mouse s lazer is off I can t hear the HDD working either Has anyone got any idea what is going on PC wont boot after BSOD The BSOD BCCode returned is as follows BCCode c BCP C E BCP C BCP B BCP OSVer SP Product The quot BCCode C quot error is not familiar to me I can t even figure out what it is using Google so I guess this is sort of a last resort I would also like to know what Product is This product ID has appeared on every BSOD error I have gotten so that would probably help out a lot I hope some of you can help it would be greatly appreciated Specs Corsair Powersupply W Black ATX EPS MSI P Platinum Corsair Dominator TWIN X C D MB Intel Core Duo E GHz HIS Radeon HD MB IceQ nbsp
"I have to manually flash the BIOS"...
Do you actually mean "reset" the bios?
Does the computer keep the correct time when it is running? The CMOS battery may be dead or the motherboard is defective
hi all Recently i have been having problems with my geforce gt agp video card In games mostly ut k after a while the computer will freeze for about seconds then crash with a bsod saying that my video bsod loop 6600gt with Infinite driver was caught in an Infinite loop bsod with 6600gt infinite loop I am using driver version These drivers use to work perfectly with this card I have been using them for months and had no problems until recently I heard that these are the best drivers for this card I tried reinstalling the video drivers which worked for about an hour but then it crashed again After uninstalling the drivers i made sure every trace of the old install was gone by using driver cleaner pro so the drivers shouldn t be corrupt or conflicting with something Ive also tried other driver versions but they had the same issues The card does not seem to be overheating At the time it crashed the temp measured degrees Could this be an issue with my video card Could it have something wrong with it Or am i overlooking something here Thanks Nissanman nbsp
If you've already tried Driver Cleaner Pro, perhaps giving Driver Sweeper a try might produce better results. It's a very similar program, but I've used it many times and I've found, on some occasions, it to work a little better than Cleaner. Have you recently patched the game or downloaded any additional content for it. Have you tried reinstalling the game? 66 degrees is a little toasty, but it shouldn't crash the card unless the thermal is starting to lose its heat dissipation. You could always reapply some thermal compound, like Arctic Silver, to the core and see what happens. If you have the fan running at stock speeds, you can download RivaTuner to adjust it during games. Usually, a game will start to lag a bit, there may be some artifacts, and then it will quit if the video card is overheating. A BSOD is usually the product of misconfigured or incompatible software (i.e. the display driver). In your case, it's the configuration.
I have a problem with a pretty old sistem: spontaneous restarts and BSODs.
I formatted and reinstalled the OS,
I tested the RAM with MEMTEST86(no problem),
I tested the HARD DISK(no problem),
I changed the IDE cable,
I changed the power supply(500w),
I changed the Video and the problem persists.
my sistem :
- amd sempron 1800+
- 512 MB RAM pc3200
- asus a7n8x
- nvidia nforce fx5200
- dvdrw teac
- hdd western digital 200gb
I forgot to mention that sometimes i receive the message :"Warning!cpu overspeed!" when BIOS performs the "system inventory" and sometimes my cpu figures "1150Mhz", altough sometimes my cpu figures "1800+".
I hope you can help me with some advices.Sorry for my bad english.
Your motherboard is old. It might have some bulging capacitors around the CPU. Be prepared to buy a new motherboard, CPU, video card and memory... Or save for an entirely new computer
I can t seem to get my cpu past ghz without getting bsod right after the windows loading screen Is it just my rigs limit or is there any way to get it past ghz My specs are motherboard ga-m sli-s rev cpu amd athlon windsor ram becuase wintec is a quot registered dealer of aeneon memory quot i have gb sticks of wintec ampx ddr and gb sticks of aeneon ddr that say wintec ampx on them psu bfg tech LS- os windows vista bit home basic oem The multiplier is at and I cannot get the cpu or is it really the fsb but my bios says cpu past without a crash at the windows loading screen and I have tried changing the cpu voltage a little but not the memory voltage My temperature never gets past c with the cpu or is it the fsb at during stability tests I noticed in easy tune it says that my ram has been overclocked as well is that why its been crashing Here is a picture of my bios overclocking options http i photobucket com albums oo giganotasaurus bios overclocking jpg nbsp
You might be able to get to higher speeds by pushing the CPU voltage, but that would make it run hotter. Core temperature scales in a linear fashion as core speed in MHz is increased, but core temperature scales geometrically when voltage is increased. In addition to higher temps, voltage increases reduce the life of the CPU. So basically I'm saying bump the voltage (at your own risk).
Make sure you're not FSB or memory limited by putting the CPU multiplier as high as it goes and the memory at the lowest possible speed. Put memory voltage to ~2.1v. I don't remember much about overclocking AMDs besides that basic kind of stuff.
According to The Overclocking World Record Database, the world record for Athlon 64 X2 5600+ Windsor core is 4151.4 MHz with a 1.68v core voltage. Setting your CPU to this sort of voltage is likely dangerous, but I'm just throwing that out there for you to show that 3 GHz is not the limit of these CPUs. Your particular chip might not clock any higher though so don't get excited
Here s my problem a couple of weeks ago I started getting the BSOD with the most frequent message of quot Beginning physical memory dump quot Eventually I formatted and reinstalled windows still no success I ve updated drivers added registry scanners But no matter what (BSOD) Assistance appreciated I do the system gets worse I thought maybe it was because of a conflict with something I got from windows update But I m not tech savvy enough to diagnose and fix it I ve attached my PC stats from everest and I ve zipped and attached my minidumps If anyone could help me fix this it would make my day Also here are the logs from my event viewer I only have the ones since I reformatted Please let me know if you need more (BSOD) Assistance appreciated info EDIT Okay there is a forum for BSOD errors any chance a mod could move this thread I tried reloading the winzip (BSOD) Assistance appreciated file for some reason its not going through nbsp
Sounds like unstable hardware, probably a power supply issue. Do you have another power supply that you can try?
Just bought a new pc and a seperate copy of windows vista ultimate. I inserted the disk and I got to the screen that said "loading windows files" then after this it went black for a second the blue screen of death appeared.The first part of the error code was 0.0000007F and the rest were 0's. Anybody had this or know what it could mean? Here are the build
G31-M7 TE motherboard
intel quad-core 6600 processor
1TB sata hard drive
When I read your issue I thought to myself, "That sounds like a memory issue." Here is the code and definition:
One of three types of problems occurred in kernel-mode: (1) Hardware failures. (2) Software problems. (3) A bound trap (i.e., a condition that the kernel is not allowed to have or intercept). Hardware failures are the most common cause and, of these, memory hardware failures are the most common.
Try this: Take out one stick of RAM at a time and try to load it. Any BSODs?
Do this: http://www.techspot.com/vb/topic62524.html The good thing about this test is it engages almost immediately as you boot-up.
It could be your harddrive as well.
I get this BSOD
BCCode : 1000007e BCP1 : C000001D BCP2 : B941DF72 BCP3 : B404EBE0
BCP4 : B404E8DC OSVer : 5_1_2600 SP : 3_0 Product : 256_1
I downloaded new drivers, disable specs on the CPU (e8500) as recommended, but 3d game crash out regularly after about 30 mins or so.
Asus p5n-d is a bit of a dodgy MOBO but I tried everything that has been recommended including bios flashes, memory check, cpu heat checks and rectifying the correct nforce 750i drivers...latest windows updates...etc...
What is the crash? hardware or software? I have a Proline 500w psu and also run a single xfx geforce 9800gt, Intel core 2 duo e8500 wolfdale, Kingston ddr2 667 mem, 200 gig sata seagate hardrive and a cathode ray 17" monitor.
any clues ideas, other than a sledge hammer. Your help will be appreciated.
A system thread generated an exception which the error handler did not catch. There are numerous individual causes for this problem, including hardware incompatibility, a faulty device driver or system service, or some software issues. Check Event Viewer (EventVwr.msc) for additional information.
As you can tell the causes of this error are very diverse which makes it a difficult one, sometimes, to pin down. For clarification, are your BSODs only while doing 3d gaming? What about video card heat checks?
I was on my desktop gaming as usual when a lovely BSOD flashed on my screen just quickly enough for me to not be able to read anything it said and then my computer restarted. After it restarted none of my hard drives show up in my bios and i cant get past the loadup screen seeing as how there is no windows showing up. I have 3 internal drives and 1 external that no longer show up in my Bios. I don't think that all 4 could have simultaneously failed and on top of that they are all relatively new. PLEASE someone help me, I have a project to finish before tomorrow
Reset the motherboard's bios...
All right here goes About six HD ATI AGP 2600 Diamond Radeon Pro BSOD months ago I installed a new graphics card ATI Radeon HD Pro AGP from Diamond Multimedia in my aging Dell Dimension along with some new RAM GB After some initial difficulties with the Blue Screen of Death I was able to get it to work simply it stopped But now they re back and worse than ever The most recent one was titled quot PAGE FAULT IN NONPAGED AREA quot and cited the file quot ntfs sys quot Also my computer is running a bit slower and quot Diamond ATI Radeon HD 2600 Pro AGP BSOD My Computer quot refuses to open no error just nothing happens when I double click on it I ve tried reinstalling the drivers that came on the CD there are none online I ve checked and I ve gotten it to work but it still gives me the BSOD seemingly without reason The errors have been happening more frequently as time goes on and seemingly without reason Even as I am typing this another one has occurred as I attempted to login Another quot PAGE FAULT IN NONPAGED AREA quot I ll attach the minidumps as soon as I can get into My Computer I m about ready to boot into safe mode Thanks I m kind of desperate Arcelios nbsp
I almost forgot; I keep getting a message saying that some of my registry data had to be recovered from a backup copy, and that the recovery was successful.
Specs Intel Core Duo E Processor BX E - GHz MB Cache MHz FSB Wolfdale Dual-Core Retail Socket Processor with Fan MPN BX E and 9800 with reboot Nvidia BSOD Crash 1GB GX2 XFX nForce i -Way SLI Motherboard - NVIDIA nForce i Socket ATX Audio PCI Express Dual Gigabit LAN S PDIF USB Firewire Serial ATA RAID MPN Crash reboot and BSOD with Nvidia 9800 GX2 1GB MB-N -ISH XFX GeForce GX Video Card - Extreme Edition FREE Call Crash reboot and BSOD with Nvidia 9800 GX2 1GB of Duty PC Game GB DDR PCI Express SLI Ready Dual Link Dual DVI HDMI MPN PVT UZHEU Corsair Dual Channel MB PC DDR MHz Memory x MB MPN TWIN X - C DHX Seagate Barracuda TB Hard Drive - RPM MB SATA- OEM MPN ST AS SY Ultra LSP -Watt Power Supply - ATX SATA-Ready SLI-Ready mm Fan MPN Crash reboot and BSOD with Nvidia 9800 GX2 1GB ULT-LSP Microsoft Windows XP Pro SP OEM Version MPN E - A The Problem I knew better the last time I opened Nvidia Control panel Performance I got this same problem But I have updated the drivers since then and now it seems worse I just opened up the performance tab I didn t even get to see the settings load before it crashed I get a quick BSOD flash and then a reboot It reboots back up without any problems then within a few minutes it reboots again I have started in safe mode with network enabled and it hasn t given me any problems I am not sure what I did last time to fix the problem I just remembered I shouldn t go anywhere near the performance settings Just like this time simply clicking on the tab to view the settings crashed the computer But last time the crash only happened when I clicked that tab Now it seems to crash within a few minutes after restarting the computer I can get in and open a program but it crashes pretty quick I have attached the DXDiag report that i just ran from safe mode I can provide any other info you need to help me get this fixed I would say I am an expert user This is probably the th computer i have built from parts It runs so well as long as this stupid thing isn t messing it up Sometimes i get a few green artifacts when running games L D HL Crysis FarCry COD It doesn t affect the game play but they are noticeable This system runs all of those games on max settings at x except Crysis If you have any ideas please help me out I need my computer back Update add screen freezing to the list of problems It will either freeze or restart I have tried to uninstall all the nvidia stuff in safe mode but I keep getting quot Failed to complete installation Install quot I cant uninstall the nvidia stuff so every time i restart it keeps rebooting GAH nbsp
I started it up today(in safe mode), and in my frustration with not being able to uninstall the nvidia apps, i just deleted all the nvidia folders in my programs. then when i started up in normal mode it was stable. I was able to finish officially uninstalling the rest of the nvidia components and then i did a full reinstall of the drivers and software. so far so good! Thanks for your ideas!
Hey, first-timer here.
Overnight my laptop was left to update itself as usuall, but when I got to it this morning I found it repeatedly flashing a BSOD with the error:
I have attempted countless boots into safe mode, all throw the same BSOD at me.
My machine is an HP Pavillion ze4900 model laptop running WinXP Home (well.. was).
I've tried a some "common remedies" but none seems to be effective at all..
Does anyone have an idea on how to recover from this, or is my laptop to hence-forth be known as a brick.
(If any solutions involve removing the HDD, you will need to explain in detail as I have not seen anything obvious on the underside)
Please run CheckDisk from your Windows XP Home CD
Info here ("From Boot Up") http://www.techspot.com/vb/post694184-133.html
I'm looking to build a new system and I'm trying to keep in really compact, but I also want to rock dual monitors. Are there any onboard video chipsets on the market now that will support dual monitors?
Repent...., and Prepare For the Future.....
Not sure really, but depending on the level of graphics performance you are expecting any Nvidia x300, x400, or x500 would provide dual monitor capability at low cost, (50 bucks or so, if you catch a good sale), while leaving you with a much greater selection with respect to choice of motherboard/ chipset combinations. I believe that all Nvidia 8500GT/9500GT video cards have HDCP compatibility so that you could easily drive your high-def TV from them. Either of these cards could most likely be used with a good 350 watt PSU, so there's no need to overbuild/overspend at this level. Avoid the overclocked versions of these cards, they use a bit more power, and it makes more sense to jump to the 9600GT series instead of trying wring more performance out of the lower series of cards
If cost is a factor I suggest purchasing a mobo board with onboard graphics, then adding the video card later. Here again though, spring for the right PSU that will allow you to grow your system. You you don't want to have to buy the PSU twice, if you change your mind about the level of upgrade you'd like to make.
You could investigate this post at Tom's hardware; http://www.tomshardware.com/reviews/amd-780g-chipset,1785-5.html It seems to answer your original question.
Having a really annoying problem with my sound driver (ha20x22k.sys) in Windows XP lately, keeps reoccurring more frequently now it seems. I will be listening to music and at the end of a random track, the system will freeze for a split second and then go to a bsod w/ the following information:
****STOP: 0x000000D1 (0x00000008, 0x00000002, 0x00000000, 0x9D3AA47F)
*ha20x22k.sys address stamp 9D3AA47F
The sound card is a Creative Labs X-Fi Titanium Fatal1ty. I do not believe the card itself is to blame for I am running the latest drivers and it works fine under Windows 7. Any help with this would be extremely appreciated. I've attached the corresponding minidump. Thanks in advance!
Long shot but try this:
Rename: c:\windows\system32\adi_oal.dll to adi_oal.OLD
Also disable any onboard sound in Bios Setup
Please let me know if it fixed the fault