Windows Support Forum

Urgent Help Needed-Physical Memory Dump Blue Screen

Q: Urgent Help Needed-Physical Memory Dump Blue Screen

Hi everyone,
I am new here and just registered as I need urgent help with my laptop. I wanted to watch a wmv file this morning, and WMP downloaded a codec file, upon installing which I instantly got the blue screen of death. I restarted my windows, a few seconds after its start-up, the ruddy screen appeared again. I ran it in safe mode; the very same thing happened. I can not run windows at all to uninstall the codec and fix the problem. I have tones of work documents on my C drive, so I cannot re-install windows. And I need to access them as they are work documents, and I need them tomorrow for a meeting. what can I do? Is the only way left to copy those files through DOS and reinstall my Windows?

Relevancy 100%
Preferred Solution: Urgent Help Needed-Physical Memory Dump Blue Screen

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link (This link will automatically start a download of Reimage that you can save to your computer.)

A: Urgent Help Needed-Physical Memory Dump Blue Screen

Can you boot from your Windows CD and restore your system to a date prior to installing the codecs? Can you do a repair install? Repair Install
Relevancy 19.35%

Intel and Micron held a joint press conference earlier today to announce a breakthrough memory technology called 3D Xpoint (pronounced 3D crosspoint) that's up to 1,000 times faster (read speeds) than today's NAND, features 1,000 times better endurance and is...

Read more

A:Intel and Micron announce 3D Xpoint, a new memory technology that's 1,000 times faster than NAND

I hope this really brings about the death of the hard drive. And it can't come soon enough.

Gimme a 1 TB Xpoint SSD that doesn't break the bank and I'm sold.
Relevancy 20.64%


Can someone give me an advice, I want to use the very high setting for GTA 5, but the video memory indicator indicates that I go overboard the 2GB of my GTX 750 TI, is that safe?.

BTW my resolution is 1366x768 only.
Relevancy 21.93%

Hi All

I'm in the process of repairing my Altec Lansing ADA885 multimedia speaker system and was wondering if anyone out there might possibly be able help.

Inside the subwoofer cabinet there's a metal box/case which contains the power supply and amplifier circuit board for the subwoofer. On this circuit board there's a 2 watt resistor labelled R2 which is badly burned. Due to the extent of the heat damage, the value (I.e. colour code) is impossible to read. If anyone can advise me as to what the value of resistor R2 should be (so that I can replace it), I would really appreciate receiving a reply. Many thanks in advance...

Apparantly, Altec Lancing no longer have a schematic diagram or any other information for the ADA885 system which they originally manufactured ~2000.

A:Altec Lansing ADA885 Info Needed Urgently

Have you called mon ,wed,and fri,I been calling for 3 wks .no body answers.I have a BX1121 3 pins broke I was looking for what color wire goes to which pin oh now their mail box is closeed
Relevancy 22.36%

Hi guys, new here...I'm setting up a new pc, sooo a few questions here.
I'm planning on getting an Asus A88XM-plus motheboard, Amd X4 860K cpu and Sapphire R9 280 3GB video how much power supply would be enough...450-500W?..would 650 be an overkill? Is all of this fully compatible?
Do I need a sound card, modem or special cooling or something? ( I already have 2*8gb Ram sticks and HDD, don't really need DVD drive).
I'm also thinking in between Antec 902 V3 case and a lot cheaper LC Power Gaming 975b Air wing much quality difference is there in between these two?
Also, how much improvement is there in between this card and my current one, sapphire r7 265 2gb?
Are there anything that you would exchange for something else...I'm on a tight budget, but I don't mind spending a few extra bucks if it be worth in the long run.
Thanks in advance.
Relevancy 20.64%

My samsung 16GB memory card is not getting detected in my laptop.
Even if I connect through my phone data card it's not detected. But it is working properly in my phone. I have been using it for 2 years.

A:Memory card is not getting detected in laptop

MerissaWalker said:

Have you tried it on other computers?Click to expand...

yes, even then it is not getting detected
Relevancy 28.38%

Memtest and other memory test software don't tell you which of the modules is the faulty one. Is there any way to tell which is the bad stick besides testing one-by-one?

Thank you

A:Does any memory test tell you which of the memory sticks is bad?

Not really. but you can test each stick one by one
Relevancy 15.48%


I've got a Dell Inspiron 9400.

For a few years now the left half of the screen is really dark, with the other side normal brightness and a noticeable divide between the two. This only happens when the power supply is plugged in, the screen is fine when running off the battery.

I remember at the time doing a quick search and reading that it was likely to be a faulty battery, so that was replaced but didn't make a difference. Very few searches come back with an exact match of my situation, but keep seeing to detach the LCD cables and make sure they're in good condition yet haven't seen any success stories.

Does anyone know the problem?


A:Dell Inspiron half of the screen is dark

Does attaching an external monitor show the same problem?
Relevancy 19.78%

Many in the PC gaming world are turning their attention to AMD's upcoming Radeon R9 300 series launch and specifically, the R9 390X. According to the latest scuttlebutt, this card will ship with two different SKUs - an air-cooled version...

Read more

A:AMD Radeon R9 390X variant will come water-cooled with High Bandwidth Memory

Having to resort to water cooling just to be on par with nvidia what a joke
amd with their hot running primitive brute force gpus
Relevancy 21.93%

Oculus VR on Friday revealed the recommended hardware specifications needed to deliver the best experience when using its upcoming virtual reality headset.

Read more

A:A high-end PC will be needed for the best Oculus Rift experience

I don't get it? It's supposed to be peripheral device. like an LCD screen, just with inbuilt mouse pointer. What does your PC specs got to do with performance, other than necessity to setup the resolution for inbuilt displays? What does it mean 'games and applications created for the Rift in-house'? Does it mean it will require custom games and applications, no support out of the box for existing games? If that's the case, their VR is gonna die faster than 3D. Please tell Me I'm mistaken?
Relevancy 20.21%

Hi all,

My friend's USB flash memory has data (its drive shows that there is data in it) but when I double click on it to open it and see the contents, it doesn't show any folders and files! I did the following works:

1- I scanned it by my updated kaspersky AV. but no threat found
2- Scanned by windows defender tool. same result!
3- scanned by malwarebytes anti-malware. same.
4- cmd (run as administrator) -> go to its drive (e.g., H:, when H is my flash drive) and typing the attarib -s -h *.* /s /d command. It could not to show the data.

All my attempts faced failure till now.

Can anyone help me please?

A:USB flash memory has data but doesn't show the contents

Go to cmd (run as administrator) -> go to its drive (e.g. H: where H is my flash drive) and type the attrib -s -h *.* /s /d
Now flash will show the data.
Your attrib spelling was wrong correct them
Try it.
Relevancy 29.67%

Hi to all at Techspot. I'm not a techie but noticed that there was two kinds of memory, DDR3 and DDR5. My Question is,
What's the difference between DDR3 Memory and the Graphics DDR5 Memory and if the DDR5 is in anyway better then why is it not used for desktop computer memory instead of DDR3.
I know some apps are taking advantage of or utilizing graphics memory Thanks for any explanation

A:What's the difference between DDR3 memory and GDDR5 memory?

As far as I know, memories used on video cards have different characteristics than memories used on PC.. since this is beyond my knowledge, I'm sorry I can't explain much more in details.. Just wait for other members with deeper knowledge that can give some information regarding of this matter
Relevancy 15.48%


I own a custom laptop on an MSI 16F2 platform. Few weeks ago my GTX 670M card died.

Out of better options, I bought an used GTX 660M from an acquaintance.

I had it installed, started Windows and everything looked OK. Then I installed the Nvidia drivers and after reboot, right after the loading screen, I got a black screen (with the screen still lit).

I went into Safe mode and uninstalled the driver. Then installed again and got the same result. Went into Bios, change settings, tried resetting CMOS, nothing worked. Installed Windows 7 Ultimate again, then Windows 8, same thing. I also tried the driver modding instructions on this forum, still nothing.

I have no clue what is wrong. If you have any idea, please help me with this.

Thank you,


A:GTX 660M black screen after installing driver

I have connected the laptop to an external monitor and it works with the Nvidia driver installed. The laptop screen works just fine without the drivers. I would really appreciate any form of help. Is it maybe the BIOS?

Relevancy 13.33%

Hi my daughter tried to adjust the resolution and now the screen is Black and stuck on Out Of Range. I cannot even get it safe mode or anything. Just a black screen with the writting. It's a windows xp 32. My son is so sad if anyone knows what to do please help. Thank you.

A:PC monitor screen is black & says "Out Of Range"

Repeatedly press F8 while the system is booting.. The very first stuff you see on screen will either be your motherboard splash screen or some text. When you get to the menu where you can make a selection, choose VGA mode NOT Safe Mode. That will boot your computer at 640x480, but it will boot with full driver support, just as if things were normal. Change the resolution to what you want after that.

Remember if you change it to something that goes 'out of range' DO NOT touch anything for 15 seconds. It will revert back to what it was after that time and you can try again.

Unrelated.. Go to school at UMR? or different Miner?
Relevancy 15.48%

My newest task is centered around an HP Pavilion 15-p033ca laptop with a broken screen. Replacing the screen is actually super simple but my issue lies elsewhere.

Normally I would hook the laptop up to a monitor via VGA cable. This newer laptop only has an HDMI hook-up, so I hooked it up to my TV with that cable. The HP logo upon start up is semi-visible as the picture is distorted. So, before I spend money and order the screen my question is...

Does an HDMI relay the Broken screens picture to the TV and that's why is messed up? or should the TV picture still be clear? Like when a broken screen laptop is hooked to an external monitor with a VGA and the external monitor works fine.

I'm worried there may be an internal GPU or Mobo issue aside from the screen being broke.... Finally is there a better way I can test this instead?

Thanks for any info or Ideas in advance!

Relevancy 15.48%

I am having an intermittent issue with my screen not waking up. It goes to sleep after 10 minutes normally but just occasionally it doesn't come back on. usually I have to reboot the pc. I tried a different monitor which worked fine, when I reconnected my normal monitor it also worked fine. The monitor power light flashes to indicate its in sleep mode but doesn't want to wake despite moving mouse or pressing keyboard. The graphics card is only a couple of months old and the screen is over 5 years old.
This problem only happens maybe once a month, the rest of the time it works as normal. Any suggestions gratefully received.

A:Intermittent blank screen

First, are you doing anything specific when this occurs, I.e. a particular game, video rendering, etc.? Second, is there dust build-up in your system? Check especially your video card fan.
Relevancy 18.06%

For the past month, Nvidia has faced its fair share of bad PR thanks to the GeForce GTX 970's memory allocation issue. As has been uncovered by users and explained by Nvidia, the GTX 970's last 512 MB of VRAM...

Read more

A:Nvidia CEO says GTX 970 memory controversy "won't happen again"

Again: the performance didn't change overnight; it's today the same performance than the advertised on launch date. Even that technicality can kill the case. Specifications were the "misleading" part.
Relevancy 15.05%

Hi, am prepared to be labelled "thick as mince" however I wonder if anyone can advise how to proceed with the following: Replaced cracked laptop screen on a TM99, on first start up after replacement, the screen worked.....woohoo!, however.....on next startup, there was nothing, no lights, no start up screen...nada. Replaced new with original screen, which although cracked had worked, and it too now failed. Any ideas? The cable for the screen was seated properly and securely, nothing else was moved so am struggling to establish a reason for this non conformance. Could it possibly be a jammed "lid closed" switch? If this is potentially the culprit, anyone know whereabouts it is? Thanks
Relevancy 19.35%

Hi, everyone - I have a dell e4300 - actually I have three. On one, when it is plugged in to charge, the blue light that indicates that it is plugged in and charging, which normally would be blue continuously, is blinking, or oscillatiing, off and on.

I bent the pin on the inside of the cord slightly in order to maybe get a better contact, and bent the barrel slightly for same reason - the blinking is the same.

So, it does not quite seem like this is a weak, variable connection. Also, I get the same thing with another charger cable. Does this mean something?

A:Dell e4300 blue light charge indicator blinking

Well ,the more I look at this, the less regular it seems, but it does come on momentarily every several seconds. It sure is not charged up, despite being plugged in for over 24 hours.
Relevancy 19.35%

Samsung has started mass producing what's being called the industry's first ePoP, or embedded package on package. By combining two key smartphone elements into a single package, Samsung's solution promises to offer high-end handset makers up to 40 percent more space. ...

Read more

A:Samsung's new mobile memory chip combines 3GB of RAM, 32GB of flash into a single package

It's the natural progression of tech right now.
Relevancy 15.48%

I am getting White Horizontal line on top of the screen.
I plugged out signal cable, those white horizontal line is gone. but I plug in switch cable, horizontal line appearing on top of the screen, so what's causing this?

A:White Horizontal line on top of the screen

Could u give some specs what monitor and video card, what operating system? what computer?
Relevancy 22.36%

Unfortunately has been few years with no PC rig since I started working and carry notebook wherever I go. But I do remember the good old days where It was great to tweak the rig and squezze every Mhz our of every component. Unfortunately its not that much fun with a notebook

I have most of my components selected :

IntelCore i7-4790K
Cooler Master V8 GTS
Corsair HX 1050
980 AMP!
G.SKILL Trident X Series 16GB (2 x 8GB)
Seagate Barracuda 2 TB
But Im wondering if this a good selection of motherboard / PSU / Memory
What do you guys think, considering I didnt overclock for quite few years now. I want easy but rock stable motherboard overclock..

A:Back to Overclock - Opinions needed

Never been to keen on MSI mobos. Bad experience in the past I guess..
Relevancy 21.07%

Hello all...I'm having problems with my Dell PC. I just purchased a sweet new scanner (ScanSnap SV600) and when I scan a lot of pages at once, I get an error message saying I'm out of storage and to restart the computer. The specific code given is 0x8007000E. I've also been noticing when I run a few web tabs at once, sometimes they just go black and I need to restart the browser. It has 8GB of RAM and all the drivers are updated. Anything I'm missing? Thank you kindly!

Dell Optiplex 790
[email protected]
Win 7 Pro

A:Memory Problems?

How much storage space do you have? From what I could research this error is tied to programs demanding a great deal of memory. You say this occurs when trying to scan a lot of pages at once. Does this occur when scanning less material at once? Have you tried updating your drivers for the scanner?
Relevancy 15.48%

Hi, I have a Toshiba Satellite Pro C660 with a blank screen. The laptop starts up and goes through its boot cycle fine, but nothing is displayed on the screen.

I've read through tons of forums, but nothing seems to work.

I did the whole removal of battery, power supply and holding the power button for 60 secs... still blank...

When plugging in an external monitor it works perfectly fine, so this eliminates any issues with the CPU / GPU / RAM / HDD, etc.

I re-installed windows 7, which would hopefully eliminate any software issues.

Next logical step was to check the LCD backlight, inverter and ribbon cable... So I replaced the screen, but still blank screen. Just as a side note, the backlight lights up with both old and new display, but no picture.

This leaves me to think that it might be something in the BIOS?

Any suggestions / ideas?
Relevancy 15.48%

Hi there! I'm using HP presario c700 . During few days I'm going to see display is not working properly. I mean I can't see anything without sound, It's display is going to show a black shadow with some scratchs.

Please anyone say something, what should I do?

A:Laptop Screen Problem

Hi there, have you tried hooking up to an external monitor? This will help you determine if it's a problem with the screen or logic board.
Relevancy 15.91%

After 3 days of not using my pc(due to broken psu) after I replace with a new psu my screen is so dim tried everything from replacing wires,adjusting brightness,replacing hardwares to replacing monitors but the problem still persists I dunno what the problem is can someone help me. thanks in advance

A:Screen too dim

Information needed: Make and Model of computer / motherboard / video card / monitor / etc.
Cannot help if no information is available about what you are using. What Operating System are you using?
Relevancy 22.79%

AT&T service

I have had an IPhone, found they are fragile, have bad battery life.

I do need to access personal email

Do not need to edit documents

I would prefer a micro sim

Either a long battery life or a easy way to switch them out

I do play a few games on my moble

Any advice?

A:New smartphone needed

...Budget? You realise any smartphone with removable battery will satisfy your requirements.
Relevancy 15.48%

Have an unusual mark on screen at startup then green lines and pink but otherwise pc ok cannot upload jpeg image for some reason
Relevancy 15.48%

I have a Packard Bell Easynote TE69KB laptop and the screen is either black or very dark, sometimes at the right angle you can just see the graphics, This started after the 18mth old son hit the top of the screen yesterday. I have tried adjusting brightness without change, with an external monitor plugged in it works fine, which is OK if I'm working at home but no good when I'm out. I am thinking I'm going to have to change he screen or can you make any other suggestions?

A:Very dark or black laptop screen

Your son has probably damaged or loosened the screen inverter. That is what lights up the screen and is a separate part. It can be found under the screen bezel. I don't think that this will cost much to fix. If you DIY read up about the job first because removing the bezel (frame) needs to be done carefully.
Relevancy 15.48%

I come here in need of some help I ve been troubleshooting this issue for quite some time and have not been able games goes while few a for seconds playing Screen black to find the solution on my own The issue Sometimes when I play games my screen Screen goes black for a few seconds while playing games will go black at a random time for a a period of time sometimes only lasting - seconds other times lasting up to a minute and then recovers itself and I m able to continue playing The sound continues playing during the black outs but I have no control of my computer Can t see anything and cannot use commands like ctrl alt del Sometimes when my computer recovers from the black screen I can hear the fans on my GPU boost up to about I have setting in MSI afterburner to Screen goes black for a few seconds while playing games increase my fan speeds as the temperature of my card goes up Sometimes when recovering from a black screen my fans will go up from to like Then it stays at for the remainder of the time until I reset my computer Once my computer is reset my card will run at the again Background and computer information This issue did not start happening until I installed and new graphics card and reinstalled windows The GPU was tested before I reinstalled windows and everything ran perfect no blackouts I reinstalled windows because I got an SSD here are my specs as of now CPU FX- MOBO Asrock Extreme RAM gb DDR and gb DDR SSD gb w windows installed on it GPU Radeon r upgraded from a radeon which ran perfect PSU w Corsair few last things to add that may be helpful - I have not experienced any black screens when using my computer and not playing games - I typically play low-end games like league of legends which aren t too intensive on the gpu - When I load into the UEFI my RAM displays as all sticks running at MHz Even though of my sticks are - my gpu has never gone over degrees since ive installed it so I dont think its an over-heating issue If you need any other information let me know and ill be happy to provide it Any help will be EXTREMELY appreciated I m going crazy right now because I can t figure this thing out lol Thanks so much - Nick nbsp
Relevancy 20.21%

1 4gb samsung pc3-12800 1.35 v
1 4gb nanya pc3-10600 1.5 v

The timings are listed different on the stick.
HWInfo reports that at 666.7 both are 9-9-9-24
Crucial will sell me all 1.35 v memory as upgrades and the 4830T-6678 Timeline X came with the [email protected]
The laptop boots and runs with both sticks installed

Any thoughts on this?


A:Mixing memory in Acer Aspire laptop

Is the laptop reporting 8GB of memory installed? If it is, you should be okay
Relevancy 15.48%

I just purchased screen quot DELL U H quot and a new computer The happy unboxing time turned to a nightmare when the noob I am could not connect the screen to the computer like the guy is doing in the youtube video Thanls Screen Info http accessories us dell com sna productdetail aspx c us amp cs amp l en amp sku -BBCG What I am trying to do This guy is connecting his screens to each other than to the PC but I am unable to achieve it 3 station configure screen my working Can't My Computer Spec Asus ROG G Desktop PC i Can't configure my 3 screen working station GB TB NVIDIA GTX - CPU Intel Core i - M Cache up to GHz - VGA NVIDIA GTX GD - OS Windows - Memory G DDR MHz - Storage TB SATA G ASUS Can't configure my 3 screen working station westorage years - ODD Blu-Ray X Combo - LAN Mbps - Audio -channel Audio SonicMaster - Card readerN A - Front I O - USB x - Mic Port x - Earphone port x - back I O x RJ LAN x HDMI-Out - x channel Audio - x USB x USB - x Power jack - power supply WAdapter - certificates BSMI CB CE FCC UL CCC Energy Star VCCI Graphic Card Spec http www asus com Graphics Cards GTX PHOC GD specifications nbsp

A:Can't configure my 3 screen working station

As far as I can tell, Nvidia doesn't support Surround (three monitors) via daisy-chaining (the card in the video was AMD Radeon). You might be able to get two monitors to work like that - some sort of DisplayPort MST support was added a while ago because of tiled 4k displays - but to get them all working they need to be plugged to the card directly.

As GTX750 doesn't have proper connectors, you might need to change your graphics card to something that has three DP outputs or 2xDP + HDMI.
Relevancy 15.48%

I run two displays. When I got up this morning, one of them is on but black. When trying to adjust my display settings, it comes on briefly (maybe 3 seconds) and goes right back off again.

System specs are as follows:

Operating System
Windows 7 Home Premium 64-bit SP1
AMD Athlon II X2 255 45 C
Regor 45nm Technology
4.00GB Dual-Channel DDR3 @ 535MHz (7-7-7-20)
eMachines EL1352 (CPU 1) 49 C
VE205 ([email protected])
VE205 ([email protected])
256MB NVIDIA GeForce 6150SE nForce 430 (Acer Incorporated [ALI])
465GB Western Digital WDC WD50 00AAKS-22V1A SCSI Disk Device (SATA) 48 C
Optical Drives
USB Audio Device

Using Sabrent USB-DH88 USB Display Adapter also

I have checked all drivers and windows shows they are up to date. Both displays were fine as of about 1 AM this morning, and to my knowledge no updates or downloads were done during this time.

Any help would be appreciated; I work from home and having dual monitors is almost critical.

A:2nd display black screen

Try changing cables first, by some chance the cable has gone bad.

Sounds like it could be a lighting issue within the monitor. If it is a backlight issue, the monitor will still be displaying an image. You will not be able to see the image without some kind of lighting. If you can use a flashlight to expose the image, you would at least know it is a backlighting issue. I've been able to use this technique on phones as well as monitors.
Relevancy 20.21%

I cloned my failing hard drive (a 160gb) to a new one (500gb). The installation seemed to go smoothly enough (it was my first time though) as it just required me to stay grounded and remove about 4-5 screws. When I loaded the PC up it wouldnt start the first time so I had to a Windows repair, which didn't seem to do anything except now it worked (it said it failed or something). I then had an issue with Windows 7 claiming to not be genuine although for one reason or another that stopped. Now my issue is that I am unable to access the additional memory of my new hard drive, I am able to access the cloned portion but not the rest (about 316gb). Any help would be appreciated, my PC is a Dell Latitude E6400 if that helps.

A:Inaccessible Memory on Cloned Hard Drive

Hello there,

It is absolutely normal not to see the rest of the free space in the moment. When you clone a drive you create the exact same image of old drive on the new one. This includes the size of the original HDD. However if you go to Disk Management ( type diskmgmt.msc in the search in the start menu and hit enter) you will see that you have one partition of 160GB and the rest of the space will be listed as unallocated. To use it you have two options ? you can create a second partition or you can extend the original one to take all the available space.

To create a new second partition just right-click on the unallocated space and select ?New Simple Volume?. This will starts a wizard to guide you through the rest of the process. First it will ask about the size of the partition. To use all the remaining space just type in the same value you have for Maximum disk space. Click Next.

Then you will get to choose and available drive letter to assign to this partition. Choose one and click Next.

Then you get to the Format partition window. You should choose ?Format volume with the following settings: ?. For the file system is best to leave NTFS. Allocation unit size as default. You can also put a label for the volume here. Then tick the box for ?Perform a Quick Format. ? Click Next. Then Click Finish. And you're done.

If at any point Windows pops up with the following message ?The operation selected will convert the disk to dynamic... are you sure you want to continue? ? click NO as this will most probably make your Windows unbootable and you will have to reinstall it.

If you want to extend the existing partition right-click on 160GB partition and select ?Extend Volume?. It will start the wizard and will only ask about how much space to add. Just select the maximum available space here and click Next, then click Finish. Once done your existing partition will be bigger and you'll be able to use all the space on your new HDD.

Hope that helps.
Relevancy 15.48%

So recently my laptop computer s screen has been exhibiting very odd behavior At random times and puslates out Laptop spazzes screen at random intervals the screen will suddenly begin to pulsate and Laptop screen spazzes out and puslates quot spazz out quot if you will The spazzing is a burst of bright pulsating pixels that either partially or completely obscure the picture on the screen When this first started happening they never lasted for more than a fraction of a second but they are becoming much longer There seems to be nothing that I do in particular that causes this It doesn t necessarily happen when I for example play a game with intense graphics Nor does it necessarily happen when my computer is hot I have a core thermometer installed to prove this It doesn t seem to specifically be caused when I move the computer around Recently the quot attacks quot have been getting more frequent and more violent but I m just not sure what causes it An attempted screenshot of the issue returned a normal-looking screen so I don t think it s a virus Here s a YouTube link to a video I caught of it The pulsating starts at Sorry about Brand New in the background Computer Model ASUS Notebook K E Processor Intel R Core TM i - M CPU GHz Installed Memory RAM GB GB usable System type -bit Operating System Thanks for your help nbsp
Relevancy 15.48%

My laptop goes into sleep mode even on slightest jerk applied on screen to rotate it,what possibly could be wrong, and on repairing how much could it cost

A:Laptop going into sleep on bending the screen

Sounds like a fault somewhere in the wiring (or a "switch" that is located inside the hinges for the laptop screen. Not 100% sure but without knowing make and model of your laptop, it is my best guess.
What you can do is the following:

Select "Power Options" in the "Control Panel" list.

Click the plus sign next to "Power buttons and lid" to expand its sub-list.
Click the plus sign next to "Lid close action" to expand its sub-list.
Click the word "Sleep" to open a drop-down menu next to the power plan you wish to adjust (e.g. Plugged In). Select "Do Nothing" from the drop-down menu.
Click "OK" to save your settings and exit the window.
This should disable the sleep option, then you wont have to worry about it until you can get it fixed properly.
Relevancy 20.64%

Hello all,
Most of memories, RAM, ROM, HDD, DVD-RAM and others are
random access. What are some non random access memories please?
Relevancy 15.48%

Just bought a 980, now all I get is a black screen no matter what GPU I use.
Here are my specs:

Operating System
Windows 8 Pro 64-bit
Intel Core i7 4770K @ 3.50GHz 25 C
Haswell 22nm Technology
16.0GB Dual-Channel DDR3 @ 800MHz (9-9-9-24)
MSI Z87-GD65 GAMING (MS-7845) (SOCKET 0) 30 C
L204WT ([email protected])
Intel HD Graphics 4600 (MSI)
465GB Samsung SSD 840 EVO 500GB (SSD) 28 C
119GB SanDisk SDSSDHP128G (SSD) 28 C
1863GB Seagate ST2000DL003-9VT166 (SATA) 28 C
Optical Drives
Sound Blaster Z

I had an EVGA 780TI working great. My 980 arrived so I swapped. All I got was a black screen. After taking the card out and putting it back in a few times nothing changed. Giving up I put my 780ti back in and now that just gives me a black screen too.

Any ideas?

Edit: My mobo gives the code A0 which is normal so I don't think it detected anything was wrong.

A:Just bought a 980, now all I get is a black screen no matter what GPU I use

If your not getting an error code its probably booting up normally. It maybe defaulting to the integrated card for some reason so I would try plugging onto the on board video when booting to see what happens.

If that is the case you will just have to go into the bios and change your default video card to the PCIE.
Relevancy 15.48%

A few days ago my laptop started doing something weird - I would watch a video on YouTube or browsing the internet when my screen would glitch out and then I am not able to do anything. Most of the times the laptop will keep on running but the screen is frozen. Yesterday I even got blue screen after that happening.

Those are the specifications. I am using Windows 7 Proffesional. My GPU is Nvidia Geforce 525M 2GB + The the graphics card that comes with the processor

A:Laptop screen glitches

What antivirus program are you running?
Relevancy 19.78%

This build will be for my 77 year old mother who lives in another state and I am trying to build this as stable and problem free preventative mode as best as I can with the understanding that any hardware can fail at any time.

Anyway, NewEgg is having both their Blue and Black WD 1TB hard drives on sale that goes off of sale after tomorrow. I know Black is often the choice due to build quality and 5 year warranty. However, the Blue would really help budget wise because every dollar counts and it sees many people have had good success with the Blue.

She does MS Office, email, surfing plus she has an online business that keeps her very busy along with uploading a lot of photos.


A:New Build: Western Digital Blue or Black?

Blue. Because of her work tasks.
Relevancy 21.07%

Compatible memory
I plan on upgrading the ram on an older laptop.
It comes with IGB DDR2 PC2-4200 533MHz SODIMM, can I add
IGB DDR2 667MHz SODIMM to the spare slot and will it detect it?
Thought I'd ask before attempting!

A:Compatible memory

Hard to say, there is only one way to know, that is to try. I'm assuming you have the modules in question. Otherwise I would suggest buying modules of the same specs to increase chances of compatibility.
Relevancy 15.48%

I am now working on a ASUS G jh I ll describe the problem from when I first acquired the laptop The laptop started up with a blue BIOS background eventually the OS started Very lightly and blue tinted After playing around I discovered that the problem was intermittent when changing the elevation of the LCD lid I ordered NEW LCD Video Cable For Asus G G JH G JW G J G SW SERIES - Q ASA http www ebay com itm trksid p m l amp ssPageName STRK MEBIDX IT thinking this would fix the problem It did not Since then I have tried one different LCD panel and get the same results Now the problem is no longer blue It s just dark very very dark I can see that it still sends the image to the screen but it looks at if it s Asus G73jh problem screen the older LCD panels with the backlight disabled I know that this does not have a backlight or inverter though I have reinstalled Windows reinstalled the drivers reinstalled CCC still having issues maybe this is related AMD Catalyst fails to load properly The error message is quot Catalyst Control Centre Command Line Interface has stopped working quot It seems maybe there is something wrong with the graphics processor but I currently have a monitor connected through VGA and have also tested the HDMI output and both work fine I have been using and testing this system Asus G73jh screen problem with the external monitor since I have disassembled the laptop to replace the LCD LED cable I no longer have the old cable Anyone with any tips I would really like to figure this out if not for a working laptop for the curiousity of knowing what caused the problem Please help I will appreciate it very much nbsp

A:Asus G73jh screen problem

Is the display panel an LCD or LED type? Many LCD laptops can be converted to LED by using a simple flat cable adapter...
Relevancy 20.21%

Connected to a PC monitor is Clear but onscreen has a blue haze even on the welcome screen. What can cause this problem? Thank you

A:Blue Green covers everything

Have you tried another monitor? This symptom is usually caused by a bad connection or a bad monitor
Relevancy 22.79%

I'm new to the world of graphics, I have the following motherboard and specs on my pc:


Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz
Intel(R) HD Graphics 64MB 1.3GB
3.0 GB RAM
Microsoft Windows 7 Home Premium Edition Service Pack 1 (build 7601), 64-bit
HARD DRIVE: 450.9GB with 350.2GB free.

I'm trying to play Aion Free to Play (server based game) I've run the 'can you run it?' test on my PC and everything is fine expect my graphics as they are on board graphics. it recommends an NVidia GeForce 780 GT or AMD Radeon X1800 XL or better. I haven't been able to find either of these as they seem to be fairly old.

based on the specs and details provided can anyone tell me what is the best card I cant get that my machine will run and that will play the game.

many thanks

A:Graphics Help Needed

Any new $80 card or better will do just fine. Just make sure your power supply is strong enough to support the card you get.
Relevancy 18.92%

Hi guys, I'm not good in english but I hope u will understand all.

Few weeks ago, my computer monitor suddenly get 1024x768 (or something like that) resolution, and I can't set better, because this is my max resolution. Before this situation I had 1920x1080 resolution. I know I can now only set resolution of my video card. I searched for reasons, and this must be corrupted EDID, but I can't find someone with this damn monitor. I also tryed install many different versions of video driver and use few different cables, but problem is still alive.

If u have this monitor, I wan't to get copy of your EDID, or if you have other idea, I can do whatever u write

Monitor: LG M2280DF-PZ
GPU - NVidia 450 GTS
Relevancy 15.05%

Hi, I'm having a problem with my Dell Latitude E6400. When I'm not using it for a while the screen goes black (like into a sleeping mode) like all computers and laptops do. But if it stays black for a little while, and when I go to get back on it and move the mouse around or press the keys the screen won't turn back on but the computer is running because the light on the keyboard are lit up and I can hear the fan running. The only way I can get the screen back on is if I shut it down by pressing the power button on my keyboard and turning it back on.

Can anyone please tell me what to do or what is wrong with it. That would be much appreciated. Thank you

Being thirteen doesn't mean I don't know what I'm talking about.​
Relevancy 15.48%

I am running Windows 8.1. After restarts, the laptop screen would be blank, yet the computer would load. If I hooked up a 2nd monitor, it would show the desktop on that screen but laptop screen blank.

Now when I try to type on that computer (I'm currently on a different computer) the typing of the keys is all off (none of the letters actually type what they are supposed to and some open up random windows and command prompts)

I am wondering if this is a virus. Currently running Malwarebytes. I did a system restore earlier and the problem wasn't solved.

A:Blank Screen error and typing issues

Could be a virus, but could also mean the motherboard is faulty. If still in warranty, RTM.

Does the laptop have a bootable CD reader? If so, then download and make a bootdisk of a small linux (e.g. puppy linux). Booting off that will virtually prove if the motherboard is faulty or not.
Relevancy 19.78%

Alright here we go it s my first time here I don t got any help searching so gonna ask here The first problem is that my notebook has recently a Bad Image error when I try to install programs like if I download in baixaki Advanced SystemCare he tells me that got a bad image Also I can t install so much things and the cleaners anti-virus thanks to that some programs as Fire Fox too here let me show you It doesn t Constantly errors and Bad blue Image screens change the error I think with others it always say this jscript dll and yeah I will not make another thread so I think I am able to show all the problems here I didn Constantly Bad Image errors and blue screens t read rules Second one much KERNEL DATA INPAGE ERROR blue screen but not frequently sometimes he freezes and does that It already maked it constantly when it was starting and I fixed it I think I think those problems are related to my HD or motherboard isn t it Third one everytime I open chrome he say that he isn t my principal browser and when I click to make it he doesn t do Constantly Bad Image errors and blue screens Also his image is bugged P S I don t remember when exactly this error of Bad Image started I was in the past without it and it suddently appeared I know that can appear by I installing something I was downloading so much in the forums GTA SA Mods P S I play so much games on that frequently War Dota Tibia GTA and others RPG but now only War Dota So waiting if you can help me nbsp

A:Constantly Bad Image errors and blue screens

Sorry I forgot, the KERNEL_DATA_INPAGE_ERROR was already constantly appearing when I start windows. Not expecified that.
Relevancy 15.48%

Hi, hope I've put enough specs in profile for you to help. I have a Compaq Presario 6735s I bought around 2008. CPU quite slow but graphics card not bad so made decision to upgrade. Looked up the laptop manual here to find compatible CPUs for motherboard, socket type etc. Went through 3 different (*****ic) buys before I found one that actually fitted.
Now with everything reassembled, screen will flash up once upon powering on, then nothing. All usual lights come on, even my wireless connects, makes usual start up noises, fan, dvd drive etc ....
Proceeded to take everything apart again, re-connected everything I tampered with. Even RAM, which I didn't have to remove before.
Still same reaction starting up.

Really frustrated with myself as thought this would be the right one. Could honestly cry, haha.

I read the tutorial on here called 'No POST' to no avail either. I really hope it can come back from this.
One last thing I can think of (before pulling new CPU out) is upgrading BIOS to support new CPU but with no screen I am stuck.

Can someone please give me a little direction?

A:Upgraded CPU on laptop, now screen won't work

Did you re-install the old CPU to see if the laptop booted normally again? Upgrading CPU's on laptop motherboards can be a very difficult thing to do. What is supposed to be compatible in reality is not
Relevancy 15.48%

A few days ago I bought some screenwipes to clean my monitor screen & iPhone screen. They worked great on my iPhone & laptop but when I did my W7 tower I felt bumps which are from un expected sneezes & would like to know if there is another way to clean that off or if I'll just have to use more than one wipe.

A:Cleaning my monitor screen

You just have to put some muscle into it! I had the same sneeze marks on my screen from over the years and a bit of elbow grease was the key.
Relevancy 15.48%

Hi all,

So I managed to drop my laptop Satellite C870 - 15K to the floor. It cracked my screen (see attached) so I'm thinking of replacing the screen myself. However before I purchase the screen I wanted to make sure the laptop is still working.

When I try to connect it to my TV through HDMI to verify if the laptop is still function I get no image. I thought maybe it's in standby mode or something so I removed the battery and tried again without luck. When I start up the laptop it sounds normal but I don't hear any windows sound or anything. Any advice on how to continue?

A:Broken Toshiba LCD screen

Pull off the bottom access panel(s) and make sure the memory and hard drive are seated properly by removing them and re-installing them. It is also possible that the broken screen is shorting out the motherboards video. Try connecting the TV after you remove the LCD panel. One more thought... you have pressed the proper F key to activate the external video port?
Relevancy 53.75%

Hello all,

I installed a Windows XP x86 on my PC. But when I open the system information window in the System Summary tab, in the right-hand pane and at bottom the following are written:

Total Physical memory 768.00 MB Available Physical memory 270.41 MB !!
Why Available Physical memory is 270.41 MB please?

PS: My system is very slow and also very slower when start up. Isn't that less Available Physical memory the source of that slowness?

A:Available physical memory, XP

You have only 1Gb of ram installed on the motherboard and XP is using 768Mb which isn't leaving much over. You need to install more ram. It depends on what you are using the computer for but I'd say you want at least 2Gb ram.
Relevancy 15.05%

I turn-on the power on my laptop and all I see is a cycle of Red, Green, Blue, White, & Black of color on my screen. Computer was working the night before. I do not know much about troubleshooting a computer. Can anyone please give me an advice or guide if this is something I would be able to tinker to work or bring the laptop over for service.
I have a Dell XPS1730 (5 years old) with Nvidia IUPGA5D G84. Recently, upgraded to Windows 7
I appreciate your assistance.


A:Laptop screen flashes RGBWB color upon power-up

The internal video has died. To verify this you can attach an external monitor and see if the display is normal
Relevancy 15.48%

Can anyone help,
I have a compaq presaio cq61

the other day the screen went dark, could just see the screen in the background, scrolled through forums and decided that it could be the inverter.
Purchased and fitted a new one screen lights up fine but now is continuously pulsating. Does anyone have an idea on this, could it be the wrong inverter? or other problems.

Your help in this would be extremely appreciated.

A:Laptop screen pulsing

The LCD panel could be bad...
Relevancy 15.48%

I have a Dell Latitude D that I dropped while in its carrying bag so even backlight Dell screen Latitude replacement no after it wasn t a real hard landing Now the backlight won t come on I swapped an entire screen assembly from an identical D and it still won t turn the backlight on I swapped the screens again and the borrowed D still works fine and mine won Dell Latitude no backlight even after screen replacement t work I didn t bother to test my screen in the borrowed D I can run an external CRT with mine and I can see the LCD display if I shine a light on it so I know the display is working and not cracked The laptop won t drive the CRT Dell Latitude no backlight even after screen replacement unless it thinks the lid is down so to use the keyboard I removed the sense magnet from the lid and taped it to the place where it would be with the lid closed I ve noticed in the past that this D often stayed fully on including the display it seemed when I closed the lid and walked away for hours Note When I tested the borrowed screen I had the sense magnet removed When the magnet is taped in place simulating lid down both the backlight and the display are off I can t see the display even when a light is shined on it but when the magnet is removed simulating lid up I get the display with no backlight It seems like the display knows whether the lid is up or down but the backlight seems to act like the lid is always down Is this possible What should I look for nbsp

A:Dell Latitude no backlight even after screen replacement

Did you replace the backlight inverter?
Relevancy 15.48%

Earlier I was surfing when the monitor went black & the laptop shut down. Simple as that/ I booted it up & no problems till a few minutes ago it happened again. Both times I had two tabs open. I'm going to save what needed in case I do a factory restore.` Vista Home Premium

A:Black screen twice on my Vista

Overheating..? Download Speedfan and tell us temps.
Relevancy 13.33%

My dell 1905fp finally crashed after a lot of years. I'm not a gamer, but I was very happy with that monitor.

Of course they no longer make it, and I understand refurbished monitors of this type are not necessarily a good option.

I can't seem to find reviews or comparisons which point the way to other similar monitors. I'm retired and just can't afford the $600 and way up price of what I've seen so far.

I just need a basic monitor with VGA and DVI, but would like the screen performance to be decent, incl for watching movies etc.

Any recommendations, and where to get a reasonable price? Again, don't want a wide screen.

Thanks much!

A:Reasonably priced 19" or 20" monitor, not wide-screen?

Nothing wrong with buying refurbs. They may have a few blemishes in the frame but nothing serious to keep them from functioning. I've bought a few myself and have had no issues with them. Although the monitors I bought were 20" widescreens that averaged $120 or less. For what you need/want, I wouldn't spend more than $150.

I know you said no widescreen, but movies do view better on widescreen. - less than $100
Relevancy 14.62%

Laptop Model Acer Aspire G Graphic Card Model ATI Mobility Radeon HD MB 512MB) screen 5470 with problem Black ATI (Acer Aspire Radeon 4745G HD Mobility OS Windows bits Problem Laptop starting to turn to blackscreen constantly since last week At the Black screen problem (Acer Aspire 4745G with ATI Mobility Radeon HD 5470 512MB) beginning it still manage to back to normal after restart But then after few days it turn to black screen during every startup whenever it progress until window start-up animation I can even still hear the welcome sound although the screen is black I can still using the laptop through safe mode After that I google for some related solution and found that it s probably the graphic card display adapter problem So I disable the graphic card Radeon HD Black screen problem (Acer Aspire 4745G with ATI Mobility Radeon HD 5470 512MB) option under display adapter and it goes Black screen problem (Acer Aspire 4745G with ATI Mobility Radeon HD 5470 512MB) perfectly well But when I enable the graphic card option under display adapter in normal mode my laptop screen will turns black again back to previous problem I tried to uninstall the graphic card under display adapter and reinstall the graphic card driver download from Acer Support but the problem still appears The graphic card driver after reinstall is appears to be ATI Mobility Radeon HD series instead of previously ATI Mobility Radeon HD Is it normal or I download the wrong driver although it s from Acer Support What should I do to solve this blackscreen problem nbsp

A:Black screen problem (Acer Aspire 4745G with ATI Mobility Radeon HD 5470 512MB)

Try this:
1) Uninstall the all AMD software with this AMD Uninstall tool.
2) Restart your PC.
3) Download and install the latest stable driver (13.4) from here:
Relevancy 15.91%

Hello everyone,

I am not very tech savvy, so I apologise in advance for my uselessness..

I'm having serious issues with my Dell, every now and then the screen will fragment violently, sometimes just part of the screen, sometimes all of it, I can move the cursor and click and open things, if I can see the screen, which is not always possible..

I believe it may be a problem with my graphics card, my Dell does not have a tower, it is the monitor and tower in one device.

It's getting to the point where I cannot submit schools tasks on time because of my system, and I am just in need of serious assistance..

Thank you.

A:Screen scrambling

It more or less is the graphics chip. If this is the case you may need to take it to a local computer repair shop.
Relevancy 15.91%

cursor goes off screen to the right and bottoom i tried the video settings with the duel monitor setting and its not that nor is it my monitor itself it happened while i was messing around with toolbars and taskbars but i tried everything and nothing helps evem n system restore dont work or adjusting my video card which is a nvida 8400 gs on my win xp sp3 dell dimension 2350, i already had my integrated video card disabled so im stumped if someone can help plz do so thanx in advanced

A:Cursor goes off screen

Most problems like this are down to having the wrong Graphic card drivers installed.
If you go to the Nvidia site, select your card from the drop down boxes.

Save the driver somewhere easy to find on your pc, (desktop)

To uninstall the current drivers, go to Control panel, system, device manager.
Click on Display adapters, right-click and choose uninstall driver.
Go back to the Desktop and run the new driver installer.
Set up the display as you want in Control panel, display.

*While you are in 'Device manager', do you have a yellow warning sign next to the 'mouse and pointing devices'?
If yes, you can right click on it and choose 'Update driver'
Relevancy 15.48%

I have a prob,whit a geforce 8800 gts 512mb.

I got it from a secondhand site and all was alright till I started to overclock

Nothing big,oc at 16% and the temp was 60*C wich aint so high.But when I started the pc next day,I got only black screen,no bios no safe mod no nothing.

I have a
pentium D 805 2.66
gigabyte ga-8i945pl-g as mobo
500 mb ram drr II/ 4 slotsX 500=2gb
acopia dual fan it-25f2 -psu

I know the mobo aint dead cuz I tested with my other gpu,and it worked
Did a bios reset-still black screen
changed the ram position
tried with other monitor
dvi-vga adapter works(I tested on the other gpu)
Nothing worked

I noticed that now when I start the pc,the gpu fan speed doesn't change I mean its at 100% but when I had a image on the screen at the start up,the fan speed was at 100% only for 3 sec,then it changed lets say at 50% after those 3 sec.

should I try the bake fix or its a certain dead card?

Sry for my spelling mistakes hope u can give me an answer cheers.
Relevancy 13.33%

My Hp pavilliin g7 series laptop running windows 7 home starts up with white screen and no beeps or sounds . Started freezing on Hp logo screen last week only sometimes. Id turn off and it would work on second try. About a year and a half ago I used laptop to preview windows 8. And after I reinstalled windows 7 it has been acting funny. Ie freezing and louder fan noise. I did recently update the bios and a pci device driver that never installed. But now it has white screen this morning. I shut off and powered up and still white.
I took off battery and pressed power for 10 sec plugged back in and still white. Still no noise.
Any ideas?

A:HP G7 17" screen starts up white and stays white

Try attaching an external monitor and notice what it displays...
Relevancy 13.33%

I have the same problem When turning on the laptop screen goes to white I can hear windows starting but cannot see anything I Laptop white starts and white stays screen up connected it to an external monitor which will only display once windows has loaded I then took the whole laptop apart and discovered the LCD cable was frayed due to a faulty laptop hinge I replaced the cable and it was the same just white The problem I think is with the motherboard Laptop screen starts up white and stays white and the intergrated video card Upon taking the whole thing apart I noticed that where the video card plugs in is right where the heat sink is and the cooling fan which gets exceptional hot I figure it has fried the board to the extend the monitor will not work where it is plugged in but the external monitor will work but only when windows boots So sad to say because of the the heat this laptop puts off and if you have it sitting on your lap or bed or anywhere else that it cannot cool properly it has over heated and you will have to get a new motherboard Moderator note Moved from this thread - http www techspot com community t up-white-and-stays-white post- nbsp

A:Laptop screen starts up white and stays white

"I connected it to an external monitor, which will only display once windows has loaded"... This is normal behavior because the video signal to the external monitor is not sent until Windows loads. If you can see normal video, the motherboard video chip is good
Relevancy 15.48%

Hi, I'm new to this site, as to any forums in general, but I was wondering if someone would help me identify what's wrong with my laptop.
It's been used for at least two good years and 've been working better or worse, I'm currently running W8, I've cleaned it many times and it isn't overheating (as far as I can tell by checking the fan.
The problem is that after an hour or so of use, it just goes to the Shutting down... screen. Sometimes it shuts down during a game, sometimes during a video or if I wait long enough it'll shut down on the desktop without any apps running.
It's really frustrating and weird, there are no errors or any indications as to why it shuts down. Happened about 20 times for the past few days. Ideas?

A:Laptop goes to shutdown screen abruptly

The laptops thermal compound has probably gone bad and hardened... This causes the motherboard to trigger its "overheating" circuit, even though it doesn't seem that hot
Relevancy 15.48%

Acer Aspire 2000 (Cl32) runs WinXP/Pro/Sp3 and can be set to display in its native resolution of 1280 x 800 from its ATI Mobility Radeon 9200 video card. However, when it reboots, it reverts to 640 x 480, and often blames an absent or corrupt video driver. My remedy is to UNinstall the video driver from Device Manager and reboot, but I'd like to have native resolution without going through this 'readjustment' at every reboot. On the rare occasions that I can access the ATI Control Panel, Schemes in the Display tab, is empty. If I select 'Default Single Display' from the offered options, the SAVE button is greyed out. Any suggestions as to how I can get the native resolution to 'stick' ?

A:Impermanent Screen Resolution

Uninstall driver via the 'Add/Remove Programs'. Run Ccleaner and clean the temp files plus registry. Download a fresh copy of the latest drivers, install.
Relevancy 15.48%

Dell Studio i nd Gen GB Gb Gb Graphic My laptop screen suddenly shows some small color boxes and goes black but laptop still on when I restart screen shows nothing but Hard disk CPU fan are running normally than I tried this Power off the computer Press and hold the quot Screen on laptop turn wont My dell D quot key on the keyboard and then My dell laptop Screen wont turn on press the power button and My dell laptop Screen wont turn on wait for the computer to start I just heard only loud beep sound continuously but screen remain black than I tried this Unplug the power cord -- gt Remove the battery -- gt Hold the power button for seconds -- gt Connect the power supply then try to switch ON the laptop and It Worked and laptop start normally but after - minutes it happen again screen gone black it shows small color boxes and go black than I tried above method once again but this time It s not working Than I connect the laptop to the external monitor and start It shows nothing on it First sec monitor run like working mode green light then it goes to offline mode orange light It s like something is resist in laptop to startup I don t know what s happening Please help Mod note Please do not spam the boards with posts of the same problem One time in the appropriate forum is sufficient Thanks nbsp

A:My dell laptop Screen wont turn on

Sounds like the graphics processor on your laptop is on the way out, if even an external monitor didn't work.

Does BIOS work? F12/DELETE when booting up to get in.
Relevancy 21.07%

I wanna make sure I done all steps before sending these 2 new sticks of memory back to newegg because there defective.

2 new sticks match the old stick. G.Skill, F1-3200PHU2-2GBNS, DDR-400, CL2.5-3-3-6 2.5 ~ 2.75v, PC3200 1Gx2

The 2 old sticks works in all 4 memory slots. New memory sticks does not.

When the PC completely boots up I get lines on the monitor and freezes PC up after done booting everything. I reboot PC then get check sum error on the black boot up screen with F1 to continue or F2 enter setup.

Acer Aspire T160 desktop

A:New Memory Issues

That's a bit too old for me to be confident giving suggestions, sorry.
Relevancy 21.07%

So, memory timings: 10-10-10-27.

Is that crap?

Edit: Is 9-9-9-24 better? I'm under the impression that the smaller the number the faster the ram.

I'm currently using this memory, it says the timings are 10-10-10-27. I looked in my bios and the timings were set to 9-9-9-24 so I changed them to match the RAM.

Is that recommended or should I have left it?

That's the wrong memory I linked to, I have this. My timings actually are 9-9-9-24. I'm trying to find my command mode, does anyone know what it is for this memory?
Relevancy 15.48%

So this is an interesting one...
There is a yellow streak on the right hand side of my screen. It has no discernible shape, and to be honest it looks like a coffee stain. However, it is defitely internal, since I have noticed that I cannot get it out, and it is...growing. It is just a light tint, with part of it being more intense than others. And here is another catch: when the resolution changes, or the screen refreshes, or when it is booting up (basically when there is a black screen) it sometimes switches to a bluish color. This is very odd. The only solution I can think of is opening it up and making sure wires are secure (note this is a laptop).

PS: I am pretty experienced in computers, first time seeing something like this.

A:Yellow Streaks in computer screen

It may be a damaged LCD screen...
Relevancy 15.48%

Just over the weekend I got rid of my extra PS I had laying around and got a HP DV - US Laptop The guy I had got it from had Windows Ultimate on it which I was okay with But it was -bit not -bit The laptop has a dual core i M processsor clocked at ghz with gb ddr ram installed so it s perfectly capable of running bit windows So I got an installation of Ubuntu bit to put on the computer as a fail-safe incase something went wrong with the installion of bit windows Well heres the thing I installed Ubuntu but it had said a file was corrupt so I had to stop it and start over again so I went ahead and formatted the Formatted Offset Is Now DV4-2164US, HP Screen whole harddrive for two reasons the install messed up and the guy had the harddrive have sections partitions on it and I didnt want that After I tried to install it went perfectly and installed but then as it rebooted some problems occured - when it booted up the screen was black but when I changed the brightness with the keys the screen showed but it was strethed past the screen about - inches to the right It was on the left edge perfectly but went past the right edges Also at the bottom it stretches anything down some and shows whats at the very top of the screen again at the bottom - when updates installed the screen was normal again so I tried to install Windows alongside Linux but it simply wouldn t so I had to Formatted HP DV4-2164US, Now Screen Is Offset format again giving me the same offset problems as the first time I ve heard people say its a screen cord problem and that its the screen itself But iif thats true then why after updates on Linux it was fixed the first time If needed I can upload pics of the screen display I would like to have anyone help that can with this problem Thanks nbsp
Relevancy 15.48%

What cause the screen resolution to be distorted?

It is not the monitor. When the monitor is connected to another system it is displaying perfectly.

A:Screen Resolution Distorted

Adjust your screen resolution.
Relevancy 15.48%

I bought a Sapphire HD graphics card card screen Black new with (almost) graphics about months ago Everything worked fine until one day ago when I booted up my computer everything booted up Black screen with (almost) new graphics card Fans Lights amp No system beeping But I was only getting a black screen with occasional small white flashes I tried booting with multiple displays and multiple ports nothing worked I also tried changing my bios settings also with no luck the on-board graphics work fine when the graphics card is removed from the PC My power supply is a W which is more than enough Again Everything worked fine until that day I doubt anything is damaged I handle everything in my PC with extreme care And yes all of the AMD drivers are installed I will try to reply to any questions asap I m sorry if I don t reply quickly I have a very busy schedule Any help on this issue would be VERY much appreciated Some PC Specs listed Black screen with (almost) new graphics card below Lenovo idea centre K Watt new power supply Intel th Generation Core i gb system RAM Not shure about the motherboard type nbsp Black screen with (almost) new graphics card
Relevancy 21.5%

Hi Everyone - I occasionally have to share a large file between one person and another for work I was using yousendit which worked site large closed Reliable Yousendit needed... file-sharing fine they have changed to be hightail and they have a blog - at their blog there are many comments circa oct about it now not working and being buggy So I don t want to go with that I am looking for current suggestions of a site for file sharing I am willing to pay a modest fee month like to know it will work well and Reliable large file-sharing site needed... Yousendit closed not junk up anyone s computer with any trashy downloader and is very simple to use - I cannot spend a lot of time teaching people with various levels of web savvy and computer savvy how to make an acct log in work some elaborate quot unique quot interface and so on I would prefer a service where an email goes to the recipient s email address they click on the link and from that easily select an option to download I am not sharing burned CDs or DVDs - I just need to share work-related audio recordings from the person recording to a transcriber When I look at reviews on the web it seems that services change a lot over time so I don t want to go for what had great reviews a year ago Please help with suggestions -Thanks nbsp

A:Reliable large file-sharing site needed... Yousendit closed

Look at
Relevancy 15.48%

Laptop, Tosh R945,Win 7 Home Premium

The computer changes the "on battery" brightness to full periodically. I cannot figure out the common theme to this....

I set it to 70% to save battery

sometime later it is 100% again

nobody uses the computer except me
I am not changing it
Relevancy 15.48%

Hi all,

My desktop machine is a Windows 7 32-bit. My problem is that when I read a PDF, the brightness of screen bothers me and I want to reduce it. My monitor is a Samsung LCD and only has a button. When I press it one time it turn the screen on/off and when I press and hold it, it just adjusts the wallpaper.

Is there a way to reduce it?

A:How to reduce my screen brightness

Your going to have to post the exact model of your monitor for us to help you because its going to be the monitor that reduces the brightness.
Relevancy 15.48%

Hello, I have nvida 8500 gt and the problem is that my screen goes white after using it for sometime, when I remove the card, it works fine.. I have the latest drivers installed but that doeesn't fix this problem... I have a dual core 2 gb ram, intel...please help!

A:Nvidia 8500 GT, Windows 7 white screen

I would gather Nivida 8500gt. I s going bad. It might be time for a replacement.
Relevancy 15.05%

I can disply my Apple MacBook Pro on my 64-inch TV screen. But the MB Pro has refresh only to 60 Hz. On the big screen this causes very noticeable flicker. What computer box or video card would I need to produce a disply on 64-inch at high enough refresh rate? (not sure what will be high enough). (Am using HDMI of course).

Thanks very much for any help!

A:Vid Card with high enough refresh rate for 64-inch screen?

Something is wrong with your connections. 60Hz is plenty.
Relevancy 15.48%

I bought a 7970 about 5 months ago and since then I have had some horrid problems with any game. While this may only happen once a week and causes my computer to crash if I do not end the game fast enough, I am concerned. I have not had heat problems and it happens at random times. Is there a fix? Want me to upload a screen shot of the problem? Thanks for the hlep.

A:7970 Textures Stretch Over Entire Screen.

Can you show us a screen shot of what your talking about? It sounds like screen tearing if im understanding what your saying.
Relevancy 20.21%

Recently I was doing a research about a memory update for my G - LA Notebook and in many websites including the Netbook User s Manual I found that this Notebook could be upgraded up to Gb of memory So Upgrading Notebook Failure G42-365LA HP Memory I bought two RAM memories of Gb each one SoDIMM DDR PC - MHz according to researched specifications But the thing is that when I installed them I couldn t enter into the OS it sent me to the Windows Error Recovery window directly and whichever option I choose it reboots and it keeps doing that Well I tried installing just one memory alone and the result is different it came up with the BSOD giving me different errors each time I reboot the Netbook These errors are BAD POOL HEADER PFN LIST CORRUPT IRQL NOT LESS OR EQUAL I ve tried to reinstall the OS with memories installed but the result is the same My Notebook is a HP G - LA Windows Home Premium x Service Pack Intel Core i CPU M GHz I don t know if I was cheated by the manufacturer website and or the others websites that s why I need your help P S When I installed just one memory module I can see The Windows intro logo but just for two seconds or so And I tried to install quot Ubuntu desktop amd x quot with just one Gb memory module inserted and everything was good but it wasn t with the two cards installed nbsp

A:Upgrading Memory Failure HP G42-365LA Notebook

One of the stick of ram maybe bad. Try them each one at a time.
Relevancy 20.21%

This was posted by Corsair a couple of days ago. What does everyone think? Is this just an attempt to get people to upgrade to shinny corsair ram, or is this finally a reason for gamers to have good ram/ overclock our current sticks?

A:Battlefield 4 loves high-speed memory?

No way the average FPS increases by 20 just by adding faster RAM (1920x1200 ultra graph)... BF3 barely gains 3 FPS from high speed RAM. It is just bloated graphs and marketing.
Relevancy 15.48%

Hey, my name is Dazz. I am pretty new here and have just built a new PC, I have connected all the parts of the PC up correctly and seem to be having problems on startup. I hear the general kick into life startup but when I look at my monitor it is completely black, no startup screen. Doesnt even turn on, the light on the monitor is set to 'standby' straight away. I have no idea what the problem is at all.

Any ideas what it might be?

I am using Sabertooth 990FX R2.0 motherboard, 750W ATX PSU, Corsair Dominator 4GB Phenom II x6, and a Prolite E2208HDS monitor

A:GeForce GTX 690 black screen issue

The real question I have is why you are pairing a GTX 690 with a Phenom X6 and 4GB of RAM!

Jokes aside, does the GPU fan spin when you startup the PC? Is it properly seated on the PCIe port? Is there a power connection to the GPU?
Relevancy 15.05%

I K ghz crossfire gig windows Hi all I have been having this very strange problem with vsync for sometime now and only recently discovered that it was something to do with v sync itself I think This is what I recorded Basically in some games not all I get what is shown in the video Now the thing is I found while I was playing around is that if I disable v sync totally this stuttering tearing seems to go away by quite a lot in Strange Sync tearing V causing microstutter/screen games The fps goes to I think cod is fixed to that and it smooths out a lot but its still a little jittery and not perfectly smooth This is also the case with bad company I never had Strange V Sync causing microstutter/screen tearing in games a problem with Strange V Sync causing microstutter/screen tearing in games any game up until about years ago when this started happening unexplainably Another strange thing about this is that it only seems to Strange V Sync causing microstutter/screen tearing in games occour ONLINE Single player has non of this at fps If I use a controller to move there is no stutter tearing I had the same issue with battlefield but for some reason I cured it by limiting the fps to and its smooth as butter I have tried this with some of the other games but it does not work To add to the strangeness this also happends on a completely different PC I built a while back And led me to believe it was an internet problem I ran many tests all to come back clear I even changed providers again as I say it only happends on some games not all games affected BF Bad company All Call of Dutys Crysis and a few more games not affected counter srike global offensive rising storm red orchestra war thunder bf with fps cap Things I have tried lots and lots of different drivers Disabled crossfire upgraded mobo cpu and ram tried different monitors tried taking my pc round a friends house still happend switching from hdmi to vga to dvi reformated windows and the list goes on If anyone has any ideas about this please let me know nbsp
Relevancy 22.36%


Where I work we need a need new server. I am not really a expert in hardware so I hope you can give me a little help choosing a fitting server, I will use a template with answers to help you understand what's needed:

1) What is the available budget?
Up to 2500? (3380 USD, 2094 GBP).

2) Which tasks will the server execute?
GPS analyses which is pure heavy computing. The amount of reading and writing to the disc is moderate. Internet traffic is low.

3) There is any preferred brand or there is any that is out of question?
Any reasonable brand.

5) Does the size of the server matters?
Should be a standard rack.

6) There are any specific requirements (interfaces, storage etc)?
- 8 cores (1x8 [preferable] or 2x4)
- 16 G byte memory
- 4 Tera byte disc
- fast CPU

I hope somebody can help me with some suggestions.

A:Buy new server - suggestions needed

I would refer to this good article.

This seems like a pretty good server for your specifications:
Relevancy 20.21%

I need forum recommendations on good reliable memory sticks, 4x4 GB or 8x2 GB (don't sure which is better). Mostly PC will be using for games and some audio recording.
Don't know which clock 1866 or 2400 (O.C.) for motherboard will be better.
Can somebody share his experience with me?

Thank you!

A:Memory advice for Asus Sabertooth X79 & I-7 3930

First, you should know that X79 is the first (and only) consumer platform with a quad channel memory controller. That means for maximum memory performance you must use at least 4 DIMMs, populating channels A, B, C, and D.
The Sabertooth X79 originally supported up to only 1866 MHz, but I see the QVL lists kits up to 2400. X79&hashedid=RPOIwd0pKLoXnbFV
If you buy a kit on this list, it has already been tested to work with your board, at least at stock CPU speeds. If you overclock your CPU (and you should with that unlocked processor), some of the higher speed RAM may not boot. I believe you'll be safe buying a 2133 kit, even one that's not on the QVL. I'm running Kingston HyperX Beast 2400 in my Asus P8Z77-V & i5-3570K system with great results, and it's not on my QVL. If you do go for the 2400, you should pick one of the 4x4GB kits from your QVL for assured compatibility. If all those are hard to find (or too expensive), roll the dice and get the kit you want, but make sure it's a name brand like Corsair, Adata, G.Skill, Patriot, Kingston HyperX, Crucial, etc., as they have reputations to preserve and do lots of testing on all platforms.
Also, check out this recent thread about whether or not fast RAM is worth the money -
Relevancy 20.64%

My motherboard is a Z77 Asrok Extreme 6.

It has four dimm slots. I have One kit of 8 gigabyte memory from Gskill that is DDR3. 'dual channel' (11-11-11-28) PC 2133.

If I get another kit of 8 gig from ANOTHER vendor and its different timings can I put them into the alternate slots and have it work? Say I buy Corsair (9-9-9-9) PC 1600. Would the two kits work against each other since they are different timings? Is this NOT recommended?

Here is another better question. What if I buy the exact same memory from Gskill and drop them in as well? So I have two kits of dual channel 8 gig ram for a total of 16 gigs. Both kits would be same type/speed and latency. Will this work or do I need to use 'quad channel'?

Edited for spelling.

A:Question about installing memory modules

Larsenex said:

If I get another kit of 8 gig from ANOTHER vendor and its different timings can I put them into the alternate slots and have it work? Say I buy Corsair (9-9-9-9) PC 1600. Would the two kits work against each other since they are different timings? Is this NOT recommended?Click to expand...

I'm thinking that different timings will cause issues with Dual Channel functionality. I'm also thinking that Dual Channel only functions if all modules can operate in dual mode. If you are not planning on operating in Dual Channel mode, I don't think it matters. However the modules should operate with the same timing, if they are to be linked together.

Anyway without actually knowing for sure, those are my thoughts.
Relevancy 21.07%

Greetings Tech memory 64 Pro 7, bit Windows More why? and Folks I have More memory and why? Windows 7, Pro 64 bit since found out that one of my memory modules is bad I am a gamer and built my system Currently my system spec is as follows Intel I K overclocked to ghz I used the default OC settings on Motherboard Asrok Z Extreme motherboard gigs of Gskill Ripsaws DDR PC module died now running on gigs Corsair Gold PS EVGA Geforce GTX w gigs onboard Win Pro Seagate Barracuda Terrabyte Drive rpm OCZ gig SSD This is used as a cache drive using Intels SRT technology set to maximized I play raid EQ high to very high settings Distant worlds all expacs Civ The Secret World X Gal Civ Heroes III and IV and I spend hours up every night correcting people on the internet ok not really I also occasionally watch HD movies I have downloaded via HDMI too my TV I also use my computer for work I typically have spreadsheets open along with a browser with or tabs open in addition to using Open office for documents Oh and lets not forget using Pandora streaming my music while I am working Now I am going to replace my module and get back UP to gigs of ram My question is do we REALLY need more than gigs for ram Also in Win is there anything I should set or reset to optimize its performance such as the page file or anything else I used to set the page file when I had Win XP but since we have so much ram nowadays I thought we no longer have to bother Any advice is most welcome nbsp

A:More memory and why? Windows 7, Pro 64 bit

This question is a Windows OS question, why was this moved to hardware?
Relevancy 15.91%

Hi I would like some help to know what Scrambled PC Screen s wrong with my computer About a week Scrambled PC Screen ago I turned it on and the screen was all scrambled and nothing was responding I restarted it and it booted up fine Then about minutes after it was at the desktop the screen went scrambled again and I had to restart it This kept happening randomly whether it be every minutes minutes minutes or hours it just scrambles with lines all Scrambled PC Screen over the screen of various colours no matter what I m doing or if it s on standby Sometimes it just cuts off from the tower and restarts Since this issue occurred and me having to constantly restart it there has also been a chainsaw-like sound coming from the tower as well I don t know if it s the fan or power supply or what Also I don t have a graphics card at the moment since it died a while back so I m using the integrated graphics from the motherboard Any help will be appreciated Thanks nbsp

A:Scrambled PC Screen

What are your full system specs (OS [32bit or 64bit?], CPU, amount of RAM)? What connection are you using to your monitor (HDMI, DVI, VGA, etc)?
Relevancy 20.64%

I m gathering components for Other - & Devices PSU Motherboards, compatability Memory, my first PC build And guess what I have a few questions The rig will be a dedicated gaming rig primarily racing games might get into flight sims Looking for reliable gt fps at or just below p single quot - quot display Will keep my current PC for non-gaming duties budget limit less the display and peripherals Will get into Motherboards, Memory, PSU & Other Devices - compatability OC but conservatively and not right away Don t expect to go SLI but might eventually Components bought or en route Corsair Carbide R mid tower ATX Win -bit Home Premium SP OEM disc Core i - K Mobo Asus Z -A LGA HDD TB WD Blue And looking at Gigabyte GTX GB prettly much decided - bang for Motherboards, Memory, PSU & Other Devices - compatability the buck and sufficient Motherboards, Memory, PSU & Other Devices - compatability for purpose price going down and rebate this month Memory GB x GB DDR SSD GB Crucial m SATA Gb s I like the price doesn t have to be the best looks like immediately installing latest drivers should take care of reviewers complaints ODD Lite-On iHAS - PSU Corsair Enthusiast Series TX M W modular subject to further research but I like this From the Asus web site I ve downloaded the Memory Qualified Vendors List QVL and the Devices QVL Too much information and not enough The memory list is extensive the devices list is not My central question is how important is it that I select memory from the Memory QVL and likewise the PSU from the Devices QVL Just looking at the devices list it is clear that not being on the list does not mean a particular part won t play nicely with the Z -A The Corsair PSU selection is very limited What should I focus on other than price Thanks for your help Frank nbsp

A:Motherboards, Memory, PSU & Other Devices - compatability

I presume then, that although it may be somewhat important to be guided by the Memory QVL (simply because it seems so comprehensive), the Devices QVL can be ignored. Will proceed accordingly.

Relevancy 15.48%

Hi All

I am running a Windows 7 PC with a Nividia NVS310 Graphics card which has 2 DVI inputs.

I currently have a 22" BENQ screen connected to one of the DVI inputs, but would like to install another older screen which uses a VGA lead. (An old HP unit supplied with the original PC)

The graphics card does not have this facility but the base unit does have the option to connect via VGA.

Questions is am I am to configure the system to recognise both the DVI connected screen through the graphics card and the VGA connected screen running through the standard base unit into a duel screen set up.

I look forward to your responses, thank you in advance.


A:Dual screen set up inquiry



# of Connectors - 2
DisplayPort - 2
Single-Link DVI-D - 2 (using DisplayPort to SL-DVI Cable Adaptor)
Dual-Link DVI-D - 2 (using DisplayPort to DL-DVI Cable Adaptor)
VGA - 2 (using DisplayPort to VGA Cable Adaptors)
Click to expand...

Normally you can not use the on-board graphics while the card is connected. Installing a card will generally disables the on-board graphics.
Relevancy 15.48%

Hey all having some graphics card problems and would appreciate any help I built two identical computers for my parents from spare driver? graphics screen after installing Black parts and some new components just to give them something to use until they can buy something newer Both work fine with the onboard graphics but video Black screen after installing graphics driver? play back Black screen after installing graphics driver? performance is obviously low very choppy Trying to install an upgraded graphics card and does the same thing in both systems System specs Dell Optiplex GX Windows XP home SP GHz Pentium GB ram Onboard graphics is Black screen after installing graphics driver? Intel G Graphics card I m trying to install is a PNY VCG APG This is a Nvidia Geforce card ddr mb x AGP interface Should mention the card was new last winter and hasn t been installed in any other PC s When I install the card and boot up it shows the specs of the graphics card in the upper left corner Goes through the normal bios and windows boot screens Windows opens in a low res graphics mode says found new hardware etc etc loads nvidia driver from windows update and prompts a reboot After the reboot it goes through the load screens again and shows the windows boot screen with the progress bar for about seconds then just goes black Monitor says quot no signal quot and goes into stand by If I restart in safe mode I get a signal back and can open windows but in low res of course Tried updating driver with the newest one from nvidia s website and no go Does the same thing All other drivers on the system are up to date Tried going into the bios setup too integrated devices-- gt primary video controller gives option for quot auto quot or quot AGP quot when the card is plugged in With the card removed it gives quot auto quot or quot onboard quot options Tried setting it to AGP and still nothing Help nbsp

A:Black screen after installing graphics driver?

Did you get this fixed?
Relevancy 15.48%

Hey guys, I need some help, I wanna play LoL but I'm having a problem because the game freezes, the screen goes black and all I can hear is the sound of it.
I play on a pc with Windows Vista Business 32bit/ 2GB RAM/Intel Core2 CPU T7200 @ 2.0GHZ/ NVIDIA GeForce Go 7400.
I can't seem to get the proper drivers though, because the nvidia website says there are none available for this graphic card.. Ideas anyone??

A:Game freezes, the screen goes black

I would either get a new graphics card or try lowering the settings as soon as you appears in a game. Change your resolution all the way down and make sure shadows and everything else is on low or very low and sound off if you like.