Windows Support Forum

BSOD with new Windows Install and Hardware

Q: BSOD with new Windows Install and Hardware

Hi Thanks in advance for any help you can provide I've been slowly building up a new system over the last few and with BSOD Install Hardware Windows new months and the final piece was adding a second PNY Nvidia GTS for a dual SLI rig Since installing the new hardware and drivers I've had some issues with an occasional sudden reboot of the PC which I later realized is Win 's new way of dropping a BSOD In the process of all of this I've been installing and uninstalling software like a madman So this week I decided to do a full reinstall of Windows No luck I've tried to eliminate any hardware overheating issues my cards stay below C The reboot crashes have come BSOD with new Windows Install and Hardware when I've been using some pretty low-demand picture editing or when I've been making adjustments in the Nvidia control panel I am hoping someone here can at least point me in the right direction if there is an obvious software issue at play or if I ended up with a defective piece of hardware Many thanks Windows Professional bit Installed this week Asus M N TD EVO Motherboard AMD Phenom II X CPU w GB RAM DDR - x PNY Nvidia GeForce GTS graphic adapters driver ver W OCZ Power Supply NO system overclocking MiniDump Attached

Relevancy 100%
Preferred Solution: BSOD with new Windows Install and Hardware

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: BSOD with new Windows Install and Hardware

Dump blames your nVidia Display Drivers, please do the followings...
- Boot into safe mode with networking
- Uninstall the nVidia Drivers (using Device Manager)
- Use driver sweeper to remove leftover nVidia display driver files Guru3D - Driver Sweeper
- Install the latest drivers NVIDIA DRIVERS 266.58 WHQL
- Reboot into normal mode


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 116, {fffffa80076e54e0, fffff88010047354, 0, 2}

Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+156354 )

Followup: MachineOwner
---------

http://www.sevenforums.com/bsod-help-support/145089-bsod-new-windows-install-hardware.html
Relevancy 64.5%

Several months ago I put windows on my custom desktop and really enjoyed it As of a few weeks ago I started getting random bluescreens They became more and more frequent with wildly ranging error codes Unable to pin down a particular cause I wrote hardware 8.1 Windows Fresh - - BSOD Likely install of it off as random issues with windows With the latest build build my computer has been a nightmare I've seen every bsod under the sun WHEA uncorrectable error IRQL not less or equal critical process died driver manager io violation unexpected kernel mode trap kernel security check failure and I decided enough Fresh install of Windows 8.1 - BSOD - Likely hardware was enough I reset the bios to default settings disabled overclock I reseated all power connections cleaned out all the dust and wiped my boot drives With a fresh install of windows all seemed to be going well Until Fresh install of Windows 8.1 - BSOD - Likely hardware just hours after fresh install I'm watching a movie with my wife and bam WHEA UNCORRECTABLE ERROR Just had a second one while typing this Today is not a good day Computer build mostly in Asus z Sabertooth BIOS latest Intel i k Corsair h i Seasonic SS- KM watt x GB OCZ Vertex in RAID x G SKILL Ripjaw X gb DDR EVGA GTX Classified Currently in default bios no OC sfc scannow no integrity violations chkdsk no bad sectors CrystalDiskInfo reports both drives in good health Memory Diagnostic test - no errors I'll probably pull the graphics card tonight but it seems to be either pointing to my power supply my drive array or something equally as random I tend to doubt it is the psu as the problem doesn't seem to come up while gaming or cpu heavy tasks - highest draw If anything it is less frequent no data to back that up though Any help would be greatly appreciated I use my desktop for work and these issues are really killing my productivity Thank you DESKTOP -Fri zip

A:Fresh install of Windows 8.1 - BSOD - Likely hardware

Got a new bsod That I had never seen before today. PAGE_FAULT_IN_NONPAGED_AREA (win32k.sys)

Might remove 2 sticks of RAM just to see if that helps things.

DESKTOP8-Sat_06_27_2015_103414_94.zip

http://www.eightforums.com/bsod-crashes-debugging/67839-fresh-install-windows-8-1-bsod-likely-hardware.html
Relevancy 62.35%

Getting a BSOD on a DELL XPS13 (L321X) after fresh install of Windows. I just replaced the MB with a new MB. DELL diagnostics show everything is okay.

Windows 7 - Home Premium - 64 Bit
Intel I7 - 2637M @ 1.7
4 GB onboard memory
120 GB SSD

A:BSOD - Fresh install of Windows - DELL Diagnostics show hardware is ok

Welcome to SF ccwtech .

Usually I would like to have more than one dump file so manually check the minidump folder.

Code:
C:\Windows\minidump
If dump files are present in that folder copy them to the Desktop, zip and upload in your next post.

As for the dump files uploaded;
The bug check is 0x9F which is DRIVER POWER STATE FAILURE that happens in
transitions between power states most commonly S0 (ON state) > S3 (Sleep state)
or vice-versa. You can read more HERE.

The most common cause is a device driver but sometimes it's the hardware itself
that is at fault.


Code:
DRIVER_POWER_STATE_FAILURE (9f)
A driver has failed to complete a power IRP within a specific time (usually 10 minutes).
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: fffffa8004090060, Physical Device Object of the stack
Arg3: fffff80000b9c3d8, nt!TRIAGE_9F_POWER on Win7, otherwise the Functional Device Object of the stack
Arg4: fffffa8009df5260, The blocked IRP

Code:
!irp fffffa8009df5260
>[ 16, 2] 0 0 fffffa8006e2e050 00000000 00000000-00000000
Unable to load image \SystemRoot\system32\DRIVERS\NETwNs64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for NETwNs64.sys
*** ERROR: Module load completed but symbols could not be loaded for NETwNs64.sys
\Driver\NETwNs64


Code:
lmvm NETwNs64
start end module name
fffff880`05c15000 fffff880`0649b000 NETwNs64 T (no symbols)
Loaded symbol image file: NETwNs64.sys
Image path: \SystemRoot\system32\DRIVERS\NETwNs64.sys
Image name: NETwNs64.sys
Timestamp: Sun Sep 18 12:26:48 2011
The driver is very old!

Code:
!devobj fffffa8004090060
Device object (fffffa8004090060) is for:
Cannot read info offset from nt!ObpInfoMaskToOffset
\Driver\pci DriverObject fffffa8003693e70
Current Irp 00000000 RefCount 0 Type 00000022 Flags 00001040
DevExt fffffa80040901b0 DevObjExt fffffa80040905d8 DevNode fffffa800408e6e0
ExtensionFlags (0x00000800) DOE_DEFAULT_SD_PRESENT
Characteristics (0x00000100) FILE_DEVICE_SECURE_OPEN
AttachedDevice (Upper) fffffa800408f790 \Driver\ACPI
Device queue is not busy.

Code:
!DevExt fffffa80040901b0
PDO Extension, Bus 0x2, Device 0, Function 0.
DevObj 0xfffffa8004090060 Parent FDO DevExt 0xfffffa8004088e00
Device State = PciStarted

Vendor ID 8086 (INTEL) Device ID 0091 (0x0091 Intel? Centrino? Advanced-N 6230)

Header Type 0, Class Base/Sub 02/80 (Network Controller/'Other')

Logical Device Power State: D0 < Also known as S0 see link above.
Device Wake Level: D3 (S3)
Driver Reference Table - NETwNs64.sys
Update - Download

Please update your Intel HD graphics driver as well, using this online utility:

Code:
lmvm igdkmd64
Browse full module list
start end module name
fffff880`04c24000 fffff880`057dbde0 igdkmd64 T (no symbols)
Loaded symbol image file: igdkmd64.sys
Image path: \SystemRoot\system32\DRIVERS\igdkmd64.sys
Image name: igdkmd64.sys
Browse all global symbols functions data
Timestamp: Wed Jul 20 00:39:50 2011
Driver Reference Table - igdkmd64.sys
Intel? Driver Update Utility
Keep us posted .

http://www.sevenforums.com/bsod-help-support/312702-bsod-fresh-install-windows-dell-diagnostics-show-hardware-ok.html
Relevancy 58.48%

Note I will get an export Persistant on Install, install All Fresh BSOD New Hardware, with DM Log Collector this evening when I get home from work but I wanted to start collecting some opinions on the subject and I do have a BlueScreenView export to hand I was experiencing a BSOD during Windows Pro Fresh Install, All New Hardware, Persistant BSOD on install x installation on a freshly built computer the installation would get to and BSOD with a variety of errors mostly IRQL NOT LESS OR EQUAL After about attempts with different UEFI settings disabled Intel NIC XMP Disabled Updated UEFI etc Fresh Install, All New Hardware, Persistant BSOD on install the install stuck and I was able to load into windows thought this was pure chance In its current state the OS boots up fine and I can log in but I have about minutes before I get a BSOD the like of which are attached in a TXT file from BlueScreenView I will get the proper DM Log Collector files this evening I have tried Checking CPU temperature Degrees C Updating MB UEFIDisabling and disconnecting NICs as I found several threads on google identifying Intel NIC drivers as a possible causeReseating all hardware and power cablesRemoving each stick of RAM in turnInstalling from UEFI and LegacyDifferent media VL image Media Creation Tool Image Installing from USB amp USB PortsWith and without XMPInstalling Chipset drivers in the minute I have in the OSUninstalling video drivers in the minute I have in the OS as I remember hearing about significant issues with Windows and nVidia DriversInstalling latest nVidia Drivers in the minute I have in the OSUninstalling the Intel NIC Drivers in the minute I have in the OSRemoving DISK WD Red TB And I have now reached the point where I am running out of troubleshooting options I do not have any spare components to trial and error with except a spare GTX amp on-board graphics and another power supply I have a few things I plan to try next from reading the forums Disable all but core to highlight a CPU fault if any Manually set DRAM configuration instead of relying on XPM Install a different operating system to help identify if hardware or driver related My System Specs are as follows Motherboard Asus SABERTOOTH Z MARK CPU Intel Core i K S Stock Speeds GFX EVGA GeForce GTX SC GAMING ACX RAM GB x GB Corsair DDR Vengeance LPX Black PC - Non-ECC Unbuffered CAS - - - XMP V CMK GX M B C I have just learned that this memory is not listed in the Qualified Vendors List for my Motherboard an oversight on my part at the time of purchase perhaps the cause http dlcdnet asus com pub ASUS mb PSU W Corsair RM x SeriesOS Windows Pro x DISK GB Samsung EVO quot SSD SATA IIIDISK WD Red TB Any help with this would be much appreciated

http://www.tenforums.com/bsod-crashes-debugging/61216-fresh-install-all-new-hardware-persistant-bsod-install.html
Relevancy 56.33%

I just installed the ASUS M N-HT MoBo quad core AMD Phenom x CPU and G x G OCZ Fatal ty RAM with the nVidia GTX video card I had Vista previously installed on my HDD with a different CPU RAM and MoBo and had no problems I've with hardware BSOD new install installed all the drivers I could find for the new hardware and can run BSOD with new hardware install the current hardware configuration in safe mode with networking Whenever I load up Vista normally it gives me the BSOD at about the same time as the side bar would load saying SYSTEM SERVICE EXCEPTION with the reference of AMDLLD BSOD with new hardware install SYS Could anyone please offer some insight on what I BSOD with new hardware install can do to fix this Could it be a registry problem I've set my RAM at and settings hoping that was the problem but received the BSOD at about the time where the side bar usually would load I've also tried just having one stick of RAM in which didn't help I also went into the BIOS and set it up with the down core set at running it as a dual core which only made it take longer to get me to the BSOD because it took longer to load Vista I don't know what else I can do

A:BSOD with new hardware install

I'm pretty sure Windows installs the OS reading your MB serial number...if that changes then normally you have to do a repair install of OS and re-activate windows with a free call to the US of A.

Things may have changed since I last had to do this.

But first I would try a different driver for that graphic card

http://www.vistax64.com/crashes-debugging/234227-bsod-new-hardware-install.html
Relevancy 54.18%

Hi everyone My mom's pc that I've build is having serious issues The frequence of BSOD's was almost one every hours So I've decided first to format and install Win x ultimate then I installed the up to date drivers Lan sound chipset gpu webcam some were installed via the windows update manager I've installed the USB driver recommended on the Asus website which is a Nec usb controller BSOD's were still happening with fresh Frequent hardware even BSOD install check... and so I've decided to check the Ram using memtest I did passes with no errors Then I tested the CPU and GPU the integrated one as I've noticed that without the GPU on the PCI-E slot BSOD's were less frequent using OCCT for one hour on both with no errors In the end I've uninstalled the USB driver as apparently it was also causing BSOD's I don't know how to check the other hardware such as disks the power supply I changed it recently and the motherboard itself I am now wondering whether it is an hardware or software issue that's why I'm posting here Before I attach the SF diagnostif folder here are the specs of my pc CPU AMD Phenom II X Black Edition no o c GPU integrated AMD HD and the one on the PCI-E a HD MB Asus M A TD-V EVO USB RAM G Skill Ripjaws GB Mhz Hard drives main WD Caviar Black Frequent BSOD even with fresh install and hardware check... GB secondary Seagate Barracuda GB Power supply Antec HCG W If you could help me I would appreciate it thanks

A:Frequent BSOD even with fresh install and hardware check...

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 3B, {c0000005, fffff80002ad193c, fffff8800a8e6020, 0}
*** WARNING: Unable to verify timestamp for klif.sys
*** ERROR: Module load completed but symbols could not be loaded for klif.sys
Probably caused by : klif.sys ( klif+1cd1f )
Followup: MachineOwner
---------
2: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff80002ad193c, Address of the instruction which caused the bugcheck
Arg3: fffff8800a8e6020, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.
Debugging Details:
------------------

EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
FAULTING_IP:
nt!KeWaitForSingleObject+13c
fffff800`02ad193c f00fba2e07 lock bts dword ptr [rsi],7
CONTEXT: fffff8800a8e6020 -- (.cxr 0xfffff8800a8e6020)
rax=b41699a106dc3d90 rbx=0000000642ea8568 rcx=0000000000000011
rdx=0000000000000062 rsi=94fffa80055cb090 rdi=fffffa8007918060
rip=fffff80002ad193c rsp=fffff8800a8e6a00 rbp=0000000000000000
r8=fffff78000000008 r9=0000000000000000 r10=0000000000000000
r11=fffff88003763180 r12=0000000000000000 r13=fffff88003763180
r14=fffff8800a8e6b10 r15=fffffa8007918168
iopl=0 nv up ei pl nz ac pe cy
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00210213
nt!KeWaitForSingleObject+0x13c:
fffff800`02ad193c f00fba2e07 lock bts dword ptr [rsi],7 ds:002b:94fffa80`055cb090=????????
Resetting default scope
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
BUGCHECK_STR: 0x3B
PROCESS_NAME: chrome.exe
CURRENT_IRQL: 2
LAST_CONTROL_TRANSFER: from fffff80002aaab4e to fffff80002ad193c
STACK_TEXT:
fffff880`0a8e6a00 fffff800`02aaab4e : fffffa80`0570ad00 00000000`0000001b 00000000`00000000 fffff880`03763100 : nt!KeWaitForSingleObject+0x13c
fffff880`0a8e6aa0 fffff800`02acfdbc : ffffffff`ffb3b4c0 94fffa80`055cb090 fffffa80`0570adf0 fffff880`0186e76f : nt!ExpWaitForResource+0xae
fffff880`0a8e6b10 fffff800`02ad3a53 : 00000000`0013fd20 fffffa80`07918060 fffff880`0a8e6ca0 fffff880`0a8e6bb8 : nt!ExAcquireResourceExclusiveLite+0x14f
fffff880`0a8e6b80 fffff960`001a617d : fffff880`00000023 fffffa80`058a7d30 fffff880`021461f0 00000000`745b2450 : nt!ExEnterPriorityRegionAndAcquireResourceExclusive+0x23
fffff880`0a8e6bb0 fffff880`02100d1f : 00000000`00000000 fffff960`001a5fd6 00000000`00041cff fffff880`0a8e6ca0 : win32k!NtUserCallNoParam+0x19
fffff880`0a8e6be0 00000000`00000000 : fffff960`001a5fd6 00000000`00041cff fffff880`0a8e6ca0 00000000`fffdb000 : klif+0x1cd1f

FOLLOWUP_IP:
klif+1cd1f
fffff880`02100d1f ?? ???
SYMBOL_STACK_INDEX: 5
SYMBOL_NAME: klif+1cd1f
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: klif
IMAGE_NAME: klif.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 522decfc
STACK_COMMAND: .cxr 0xfffff8800a8e6020 ; kb
FAILURE_BUCKET_ID: X64_0x3B_klif+1cd1f
BUCKET_ID: X64_0x3B_klif+1cd1f
Followup: MachineOwner
---------
It looks like Kaspersky is responsible for the BSOD's.
Please remove it fo... Read more

http://www.sevenforums.com/bsod-help-support/315152-frequent-bsod-even-fresh-install-hardware-check.html
Relevancy 54.18%

Hello I am having BSOD Blue Screen Of Death Issues issues in recent days Ever since I installed my older internal PCI dial-up modem card inside mydesktop computer I have been receiving BSOD most out of times I'd say onlyduring the final quot Shutdown quot stage with my Windows Pro -bit OS Windows runs great before during and after startup and while Windows isrunning I only get the BSOD issues a few seconds after I have commenced asystem restart or system shutdown following the Windows quot Shutdown quot screen System restarts are more common with BSODs than system shutdowns I have check my Device Manager for this Intel EP Modem and the devicestatus the driver states that quot this device is working properly quot It is from digital signer is Microsoft Windows Hardware CompatibilityPublisher The driver provider Intel Corporation The drive date The driver 64-bit 7 Due Modem BSOD To Internal WIn Dial-Up Hardware Install? PCI version I ran a System File Checker sfc scannow while in the Windowsenvironment and it stated at the conclusion quot WindowsResource Protection didn't WIn 7 64-bit BSOD Due To PCI Internal Dial-Up Modem Hardware Install? find anyintegrity violations quot Yes obviously you're going to say it is the added PCI dial-up modemhardware that is the issue and or in combination WIn 7 64-bit BSOD Due To PCI Internal Dial-Up Modem Hardware Install? with the driver After Iinstalled this hardware this is when this BSOD issue all started Yet thedriver does not show any issues as I have stated I have since removed this PCI dial-up modem and when I did the BSODissues immediately stopped proving it is this piece of hardware as the rootcause I was planning on using the dial-up modem for a Caller ID system thatuses the modem in your Windows-based computer to monitor incoming phone calls When a phone call is received the program displays the Caller ID info on thecomputer screen I have not configuredthis yet as I am trying to overcome this BSOD issue first Some stats The dial-up modem is called a EZ Media Fax Modem - InternalPCI v Kbps with Intel Modem Chips v and v I have the original standard ASUS P Q motherboard I have a Motorola external broadband cable modem and a LinksysDual-Band Wireless-N gigabit Router receiving a broadband communication Thetelephone cord connected to this PCI dial-up modem is connected to a telephonesplitter jack that is connected to my digital phone cable modem jack I amrunning a dual boot situation with Windows Pro -bit and a Windows Pro -bit on different primary partitions on the same internal hard drive I haveprovided Windows Problem Signatures below for your inspection a varying timesfrom Windows Pro -bit I have not received any BSODs with Windows Pro -bit OS My question to you Is there a way to get this added PCI dial-up modem towork with my system If you can help me please suggest to me how I can stillkeep installed my added PCI dial-up modem and stop getting this BSOD issues Please reply Thank you Problemsignature Problem Event Name BlueScreen OS Version Locale ID Additionalinformation about the problem BCCode e BCP FFFFFFFFC BCP FFFFF EBAB BCP FFFFF BCP FFFFF EE OS Version Service Pack Product Filesthat help describe the problem C Windows Minidump - - dmp C Users TROY AppData Local Temp WER- - sysdata xml Readour privacy statement online http go microsoft com fwlink linkid amp clcid x If theonline privacy statement is not available please read our privacy statementoffline C Windows system en-US erofflps txt Approximate time of incident - - at AM Problemsignature Problem Event Name BlueScreen OS Version Locale ID Additionalinformation about the problem BCCode BCP FFFFFA BCP EAE BCP BCP OS Version Service Pack Product Filesthat help describe the problem C Windows Minidump - - dmp C Users TROY AppData Local Temp WER- - sysdata xml Readour privacy statement online http go microsoft com fwlink linkid amp clcid x If theonline privacy statement is not available please read our privacy statementoffline C... Read more

A:WIn 7 64-bit BSOD Due To PCI Internal Dial-Up Modem Hardware Install?

BSOD Help and Support - Windows 7 Help Forums
Blue Screen of Death (BSOD) Posting Instructions

You should restart the thread in good forum !

Good luck !

http://www.sevenforums.com/hardware-devices/282386-win-7-64-bit-bsod-due-pci-internal-dial-up-modem-hardware-install.html
Relevancy 53.75%

Hi The problem is a mix of BSOD s and freezes I only noticed the error message on the BSOD a couple of times which was quot page fault in non-paged area quot with a reference to the file win k sys It then started a memory dump and rebooted on completion Attached is the minidump file and and in fault with install Page hardware new BSOD area non-paged a txt document with the error codes The machine is new I built it last September - specs below with Page fault in non-paged area BSOD with new install and hardware Vista -bit SP It had been running absolutely fine since a week ago when I swapped my old Seagate hard drive out and put in the current drives and installed them in RAID Initially I thought that it was the RAID config or drivers and have since done several Page fault in non-paged area BSOD with new install and hardware reinstalls However same probs kept occurring I was Page fault in non-paged area BSOD with new install and hardware also worried that my system might be underpowered and that the nd hd was just slightly too much I ve consequently also reinstalled everything on one of the hard drives and disconnected the other as it is now but still the same problems I can t help feeling that it s hardware-related and am on the verge of buying a higher-powered PSU I ve run Memtest a couple of times to coverage no errors Have Kaspersky Internet Security installed fully updated and nothing detected just now after a full scan Hope you can help Am desperately trying to do my work on this machine Thanks Specs Asus P Q motherboard Intel C D E stock Geil Black Dragon GB MHz dual channel Powercolor HD PCS Mb x GB Seagate currently x DVDRW Corsair VX W several fans EDIT Another crash just now but this time the screen went haywire with lots of colours and lines - no BSOD or anything else Wasn t doing anything stressful just IE Could the video card be damaged Had the processor running lightly overclocked before Christmas and tried it with Crysis - could this have pushed the PSU to beyond limits nbsp

Relevancy 51.17%

Toshiba u845w-

originally comes with win8; so naturally I changed Bios to legacy and installed windows 7... the laptop comes with a 32gb pci ssd and after win7 is loaded there is no room to even download updates, decided to order up a larger pci ssd to load windows 7 on and I have checked bios settting a ton of times and I now get 90% of install of win 7 and I get a "windows will not install on this hardware"....any clues?

I had windows installed with a 32bit win7 home and ive tried 64bit now but I cannot figure out what im missing...

A:WINDOWS 7 will not install on this hardware.

The 32gb SSD is a caching drive meant to speed up the hard drive, but they are installed in a RAID that needs a driver which apparently is not in the 64 bit Win7 installer. Since 32 bit performs better for >4gb RAM installs I would boot it's installer to reinstall your licensed version.

More found on this model missing RAID drivers during reinstall here: http://www.reddit.com/r/techsupport/...ws_7_64bit_on/

A tutorial which explains reinstall where MSATA or Intel Smart Response (caching) technology is used: Install Windows on System with MSATA and ISRT - Windows 7 Help Forums

If you have further questions I'd ask in the tutorial comments section as Sandeep is expert on these types of installs, even for other makes than Dell. We also have others who can help you if needed.

http://www.sevenforums.com/installation-setup/320435-windows-7-will-not-install-hardware.html
Relevancy 50.31%

I just got a Dell Inspiron from a friend and formatted the hard drive because he had about years of data and use on it so I wanted to start fresh Installed Windows XP and Windows won't hardware automatically new install downloaded SP on my other computer what I m on now and put it on my flash stick then put it on the and installed SP fine Installed graphics card drivers the same way worked fine nVidia Geforce Windows won't install new hardware automatically Go But Windows won t automatically recognize the hardware in the laptop Sound wireless network card and some other things aren t recognized Control panel says there s no sound card or wireless card but Windows won't install new hardware automatically there obviously is and it was working before I formatted the hard drive I downloaded Inspiron drivers and installed fine and got my bluetooth working but it didn t recognize the sound or wireless yet XP even didn t recognize the graphics Windows won't install new hardware automatically card until I installed its drivers It just referred to it as Default Monitor The thing is I don t know the model type of the sound card wireless card or other parts since Windows won t even show me that they re there My friend had pre-installed Dell software before I formatted so I m thinking the drivers were pre-installed with that software But there has to be a way to get them back Does anybody know what I can do to get the sound and wireless internet working I ll probably be able to find its drivers once I can find out how to make Windows recognize that the hardware is actually there It obviously has to be since it s a laptop so it s not like I took it out I d prefer to find out how to get the wireless internet working first so I can use it to find a fix on the internet rather than having to use a different computer Dell Inspiron GHz Centrino Processor GB DDR MHz RAM GB HDDCD-RW DVD-RWThanks

A:Windows won't install new hardware automatically

wireless driver at http://support.dell.com/support/downloads/...tid=&impid=

http://www.bleepingcomputer.com/forums/t/264869/windows-wont-install-new-hardware-automatically/
Relevancy 49.88%

Ok I have a wierd problem Well actually The first one is that my original hdd must have gotten infected or something because sound is totally disabled even though device manager computer install, won't any New Windows hardware detect says it's working internet connection shows as being disconnected but actually works Windows update won't work at all system restore is saying that there's nothing there to restore etc I tried the obvious stuff like malwarebyte hitman spybot adaware antivir full scan and such Nothing works I've never tried using New Windows install, computer won't detect any hardware hijackthis or one of these forums so I decided to try it Second problem - I decided that with this happening I wanted to get a new drive anyway even if the old drive gets fixed I'd use it as a storage disc So I bought a gb SATA installed it put it as my primary boot and installed Vista from disc Everything went smoothly and Windows started up Very quickly I noticed New Windows install, computer won't detect any hardware that Vista wasn't detecting ANY of the hardware such as the video card ethernet soundcard etc I asked Windows to look for new hardware in device manager to no avail I restarted to see if New Windows install, computer won't detect any hardware anything changed but alas it didn't so I changed back my old HD to the primary boot and am using that again I can't understand what's going on I only have one copy of windows and have it installed on both but I didn't think that would be a problem I didn't authenticate it on the new system yet When I'm on my old one like now everything's fine and detected in some cases not working because the virus thing but they're recognized I'm stumped and would really really appreciate any help Thanks

A:New Windows install, computer won't detect any hardware

did you install the m/board drivers after loading vista on the new drive

then load the drivers for the other items

http://www.techsupportforum.com/forums/f217/new-windows-install-computer-wont-detect-any-hardware-506105.html
Relevancy 49.88%

Hello Sevenforums I apologize in advance if I posted this in the wrong area Im having major issues re activating windows after a massive hardware new after 7 not activate hardware windows will product key install upgrade My copy of windows is genuine it was a retail upgrade from windows vista and I did the validation over year ago Still have the box CD code etc It keeps telling me to activate windows days remaining Which Ive tried to do It rejects my code Ive tried windows 7 product key will not activate after new hardware install all known methods of activation I've contacted support at Microsoft and got no help the guy on the phone I could barely understand I would be over the moon if somebody could give me a solution basic facts Only done fresh re-install and full backup of windows over the lifespan of the product key This was an upgrade copy designed for windows vista purchased from one of the largest retail stores in New Zealand My hardware is now completely new bar the hardrive DVD writer amp chassis All hardware has been installed correctly and has been burnt in Code Diagnostic Report ----------------------------------------- Windows Validation Data-- gt Validation Code Cached Online Validation Code x Windows Product Key - - PHP -HQX X- HG V Windows Product Key Hash eFzXSbfBjnArkzKHGHrtQZEQjmA Windows Product ID - - - Windows Product ID Type Windows License Type Retail Windows OS version ID EF B A- FF- FDF-AE -BA C E Is Admin Yes TestCab x LegitcheckControl ActiveX N A hr x Signed By N A hr x Product Name Windows Home Premium Architecture x Build lab win sp gdr - TTS Error Validation Diagnostic Resolution Status N A Vista WgaER Data-- gt ThreatID s N A hr x Version N A hr x Windows XP Notifications Data-- gt Cached Result N A hr x File Exists No Version N A hr x WgaTray exe Signed By N A hr x WgaLogon dll Signed By N A hr x OGA Notifications Data-- gt Cached Result N A hr x Version N A hr x OGAExec exe Signed By N A hr x OGAAddin dll Signed By N A hr x OGA Data-- gt Office Status N A OGA Version N A x Signed By N A hr x Office Diagnostics D FF - - D FF - - D FF - - D FF - - D FF - - D FF - - D FF - - D FF - - Browser Data-- gt Proxy settings N A User Agent Mozilla compatible MSIE Win Default Browser C Program Files x Mozilla Firefox firefox exe Download signed ActiveX controls Prompt Download unsigned ActiveX controls Disabled Run ActiveX controls and plug-ins Allowed Initialize and script ActiveX controls not marked as safe Disabled Allow scripting of Internet Explorer Webbrowser control Disabled Active scripting Allowed Script ActiveX controls marked as safe for scripting Allowed File Scan Data-- gt Other data-- gt Office Details lt GenuineResults gt lt MachineData gt lt UGUID gt EF B A- FF- FDF-AE -BA C E lt UGUID gt lt Version gt lt Version gt lt OS gt lt OS gt lt Architecture gt x lt Architecture gt lt PKey gt - - - - HG V lt PKey gt lt PID gt - - - lt PID gt lt PIDType gt lt PIDType gt lt SID gt S- - - - - - lt SID gt lt SYSTEM gt lt Manufacturer gt System manufacturer lt Manufacturer gt lt Model gt System Product Name lt Model gt lt SYSTEM gt lt BIOS gt lt Manufacturer gt American Megatrends Inc lt Manufacturer gt lt Version gt lt Version gt lt SMBIOSVersion major quot quot minor quot quot gt lt Date gt lt Date gt lt BIOS gt lt HWID gt E DF FE lt HWID gt lt UserLCID gt lt UserLCID gt lt SystemLCID gt lt SystemLCID gt lt TimeZone gt New Zealand Standard Time GMT lt TimeZone gt lt iJoin gt lt iJoin gt lt SBID gt lt stat gt lt stat gt lt msppid gt lt msppid gt lt name gt lt name gt lt model gt lt model gt lt SBID gt lt OEM gt lt GANotification gt lt MachineData gt lt Software gt lt Office gt lt Result gt lt Result gt lt Products gt lt Applications gt lt Office gt lt Software gt lt GenuineResults gt Spsys log Content x Licensing Data-- gt Software licensing service version Name Windows R HomePremium edition Description Windows Operating System - Windows R RETAIL channel Activation ID e d d- - f - - e f b ad Applicati... Read more

A:windows 7 product key will not activate after new hardware install

I can't see any problems with the report - you probably simply need to use telephone activation.


telephone activation (operator calls)
Click on the Start button
in the Search box, type
SLUI 4
and hit the Enter key
follow the instructions, but when asked which service you require by the telephone ansafone, do NOT reply - this should force an operator to respond, who can deal with you

http://www.sevenforums.com/windows-updates-activation/276258-windows-7-product-key-will-not-activate-after-new-hardware-install.html
Relevancy 49.88%

Ok I have a wierd problem Well Windows computer won't detect hardware New install, any actually The first one is that my original hdd must have gotten infected or something because sound is totally disabled even though device manager says it s working internet connection shows as being disconnected but actually works Windows update won t work at all system restore is saying that there s nothing there to restore etc I tried the obvious stuff like malwarebyte hitman spybot New Windows install, computer won't detect any hardware adaware antivir full scan and such Nothing works I ve never tried using hijackthis or one of these forums so I decided to try it Second problem - I decided that with this happening I wanted to get a new drive anyway even if the old drive gets fixed I d use it as a storage disc So I bought a gb SATA installed it put it as my primary boot and installed Vista from disc Everything went smoothly and Windows started up Very quickly I noticed that Vista wasn t detecting ANY of the hardware such as the video card ethernet soundcard etc I asked Windows to look for new hardware in device manager to no avail I restarted to see if anything changed but alas it didn t so I changed back my old HD to the primary boot and am using that again I can t understand what s going on I only have one copy of windows and have it installed on both but I didn t think that would be a problem I didn t authenticate it on the new system yet When I m on my old one like now everything s fine and detected in some cases not working because the virus thing but they re recognized I m stumped and would really really appreciate any help Thanks nbsp

Relevancy 49.88%

Not sure where else to post this; sorry if this is the wrong spot.I'm having an issue with my PC and wondering if anybody better with computers has any suggestions as to what component is failing. My wife was using the thing when the prstarted, and her original description made me think it was a software issue.

A:Can't install Windows 7, Suspecting hardware issue

My bad. I guess using my phone for this was a mistake.
Anyway, long story short, I eventually tried to fix the thing by formatting and reinstalling Windows 7. And I'm getting an error message saying, Windows cannot install required files 8007037.
I tried installing Windows XP for diagnostic purposes and got the blue screen of death. So I'm expecting a hardware issue now. Any thoughts about which part is most Likely the cause or how I proceed?
Thanks.

http://www.bleepingcomputer.com/forums/t/523124/cant-install-windows-7-suspecting-hardware-issue/
Relevancy 49.88%

Hello Community I have a Windows Your Cannot Install Computer Err: Configure Hardware in to problem Im just installing Windows on the following system and i am getting the above error All brand new items i k gb ddr Corsair Asus P P B rev LG DVD Burner on SATA g Mouse Keyboard on USB Club D gtx ti Ultron Card Reader x TB Caviar Green on Raid with partitions set up in the intel boot software one just under tb and the other at TB the HDDs are SATA G HDDs in Bios set to RAID Windows home premium x Anyone got a clue Install Err: Windows Cannot Configure to Hardware in Your Computer installs Install Err: Windows Cannot Configure to Hardware in Your Computer fine in the end when its doing the config it gives me the error Is it any of the hardware or is it getting confused with the raid oh the MB has two G connectors one set of Marvel and one of Intel Im using the intel with Rapid Storage Technology and set the disks up in the Boot Utility from intel Thanks a lot

A:Install Err: Windows Cannot Configure to Hardware in Your Computer

Win7 doesn't much like dated RAID. Try installing to one HD plugged in alone and set to AHCI in BIOS. Unplug all peripherals.

Next try removing all but 2gb RAM to try install.

Check for newer BIOS update on Asus website. If none, reset the CMOS: Clear CMOS - 3 Ways to Clear the CMOS - Reset BIOS

Next wipe the HD: SSD - HDD Optimize for Windows Reinstallation

If install makes it to installing drivers and stalls, use this method to enter Device Manager and uninstall any Device(s) in error to let install complete, then update driver(s) from the Desktop: Device Manager - Access During Windows 7 Installation

http://www.sevenforums.com/installation-setup/192391-install-err-windows-cannot-configure-hardware-your-computer.html
Relevancy 49.88%

I got the Win 8 pro upgrade and since I am getting a nice refund for taxes I am buying an new motherboard cpu and ram.

What I would like to know is am I still going to be able to use the Upgrade on the new hardware? I can install win 7 first then do an upgrade if need be. Will I have to do something with the activation or what?

I am unsure of what is going to be required of me. Am I still legal with the upgrade install or will I have to buy an oem or retail?

A:Windows 8 upgrade version install on new hardware.

Hello Sparker,

As long as you no longer use the Windows 7 product key while the Windows 8 is installed, then you'll be good to go to do a clean install with the upgrade copy.

Clean Install with Windows 8 Upgrade

http://www.eightforums.com/installation-setup/19270-windows-8-upgrade-version-install-new-hardware.html
Relevancy 49.88%

Ok I have a wierd problem Well actually The first one is that my original hdd must have gotten infected or something because sound is totally disabled even though device manager says it's working internet connection shows as being disconnected but actually works Windows update won't work at all system computer detect won't any Windows install, hardware New restore is saying New Windows install, computer won't detect any hardware that there's nothing there to restore etc I tried the obvious stuff like New Windows install, computer won't detect any hardware malwarebyte hitman spybot adaware antivir full scan and such Nothing works I've never tried using hijackthis or one of these forums so I decided to try it Second problem - I decided that with this happening I wanted to get a new drive anyway even if the old drive gets fixed I'd use it as a storage disc So I bought a gb SATA installed it put it as my primary boot and installed Vista from disc Everything went smoothly and Windows started up Very quickly I New Windows install, computer won't detect any hardware noticed that Vista wasn't detecting ANY of the hardware such as the video card ethernet soundcard etc I asked Windows to look for new hardware in device manager to no avail I restarted to see if anything changed but alas it didn't so I changed back my old HD to the primary boot and am using that again I can't understand what's going on I only have one copy of windows and have it installed on both but I didn't think that would be a problem I didn't authenticate it on the new system yet When I'm on my old one like now everything's fine and detected in some cases not working because the virus thing but they're recognized I'm stumped and would really really appreciate any help Thanks

A:New Windows install, computer won't detect any hardware

System manufacturer and model?

Does system employ restore/recovery partition?

Are your disks recovery/restore types from an OEM (Dell, HP, etc.)?

Louis

http://www.bleepingcomputer.com/forums/t/339837/new-windows-install-computer-wont-detect-any-hardware/
Relevancy 49.88%

HARDWARE RAID ACTIVATION POST WIN OS INSTALL Hardware RAID Windows install OS after installation 7 Installing a RAID array during a new system build is not so difficult but Once I decided I wanted a RAID array on my existing Win PC I quickly discovered that it is not easy to accomplish that particular wish However it can be achieved without hacking the registry Here is the procedure that worked for me Goal to install a pair of TB WD Caviar blacks in Hardware RAID on an already installed Hardware RAID installation after Windows 7 OS install Win system Win OS resides on a separate GB SSD boot disk Motherboard ASUS P X PRO SATA Ports as follows x Intel SATA x Intel SATA x Marvel SATA CPU i GB OS Win Professional x Drives in final configurations SSD GB Win Drive On Intel SATA controller Non RAID assigned but controller in RAID mode SSD GB Data Drive On Intel SATA controller Non RAID assigned but controller in RAID mode x TB Internal non RAID drive to backup RAID array RPM MB on Marvel SATA Controller AHCI x TB Caviar Black in RAID RPM MB on Intel SATA controller in RAID mode x TB External USB Drives Backups x DVD on Intel SATA controller Non RAID assigned but controller in RAID mode Issue Once windows is installed without RAID it is difficult to get it to recognise RAID hardware If you install RAID drivers without the RAID hardware enabled the drivers do not fully install If you enable the RAID hardware without drivers installed windows will crash on boot Catch Outline of procedure Part install the latest RAID drivers while the SATA ports are in AHCI mode Juggle the boot amp RAID disks to appropriate SATA ports temporarily Enable RAID in BIOS and set it up with its POST utility With RAID hardware enabled Windows driver install can be completed Disks are reorganised onto their appropriate controllers if necessary The BIOS is tidied up amp the RAID disks are finalised for use in diskmgr or partition wizard Detailed Procedure I flashed the motherboard BIOS to its latest version Begin with BIOS in SATA controller in AHCI mode for all disk controllers I backed up C drive to External Disk prior to messing with RAID drivers Win Norton Ghost amp Partition wizard recovery disks were on hand Downloaded and installed latest Asmedia SATA Controller driver V using the provided setup exe Reboot Downloaded amp installed the Intel Rapid Storage Technology Enterprise IRST driver using the setup exe Reboot This is the RAID driver and it gets partly installed at this step Backed up again post driver install Copied these drivers to USB for use later in the process You may note that diskmgr now has some RAID functionality in its menu options but we are not done yet Turn off PC Physically connect boot drive SSD amp CD to Marvel SATA controller Put RAID drives on the Intel SATA controllers Boot to BIOS switch BIOS from AHCI to RAID Check set boot sequence to DVD st SSD boot disk nd Save amp Exit Reboot Pass the BIOS but enter the IRST RAID by CTRL-I during POST Assign the two Caviar disks to RAID K Save Exit Reboot If all has gone well at this point it will boot into windows If the driver installation hasn t succeeded windows will BSOD during the load If it hangs put the drives amp bios back to their original settings and windows will probably load fine in which case you can re-attempt to load the SATA amp RAID drivers If Windows won t boot restore the C drive from backup and then reattempt to load the drivers Carrying on as if Windows booted successfully after setting BIOS SATA to RAID Windows will now detect the active RAID Controller hardware I had to direct windows to the drivers I had placed on the USB key Those drivers were recognised amp installed correctly reboot Check that the system boots correctly drive letters may have jumped around but don t reset them yet Turn off the system Now I placed my SSDs on the GB Intel SATA ports and my DVD on the SATA ports with the RAID disks Next I booted to the BIOS and checked set the boot sequence to DVD st ... Read more

A:Hardware RAID installation after Windows 7 OS install

Here is a pic showing various driver details etc

http://www.sevenforums.com/hardware-devices/257866-hardware-raid-installation-after-windows-7-os-install.html
Relevancy 49.88%

Hello My friend purchased an old IBM GL for Internet use It is a PIII with Meg of RAM onboard audio an old AGP video card as well as an old PCI Ethernet card Okay here is the problem and the reason why I put this in hardware is that based on what I see I think this has to be either a hardware or BIOS issue even though won't IBM Windows (Hardware 300GL issue?) Install the system post test fine with no beeps or errors from the IBM 300GL won't Install Windows (Hardware issue?) hardware or the memory When you try to install Windows on the computer it will copy the files and once done IBM 300GL won't Install Windows (Hardware issue?) it will just hag on the Starting Windows part When you try to install Windows you boot the computer up go to the CDROM drive and type setup nothing happens I have never seen this happen before What has been done to the computer thus far is -The HD that was in the computer was replace bad sectors on the old one - The CDROM drive was replaced -All cards were removed from the computer and we even tried another video card -The memory is Meg simms The install was tried with just one at a time to see if there were any issues with the memory -The OS was copied to the HD and the install tried from there same issue We played around with the BIOS setting however this computer has weird security settings for the drives that make me think it could possibly a BIOS setting causing the problem What needs to be tried I told my friend to try and slave the CDROM off the HD on the primary IDE and try it and if that dose not work to do the same for the secondary IDE perhaps there is an issue with the IDE A LARGE HAMMER Has anyone experienced an issue such as this with a IBM GL were the computer just will not install windows either or Can any suggest anything in regard to the BIOS settings or perhaps the DIP switches on the MB since there was no manual with the computer I know I missing something simple Thank you in advance for you time and help Chris nbsp

A:IBM 300GL won't Install Windows (Hardware issue?)

I have one and it's a WITCH! Mine was running fine untill I needed parts for a newer computer - so I borrowed them from the IBM. When I got around to putting it back together it flat wouldn't run.
There is a pin on the MB to reset the BIOs - it's easy to find (on mine anyway) and it say's "reset BIOs" on the MB.
There should also some documentation glued to the inside of the case that you need to study.
Then you need to actually boot into the BIOS and check every setting one by one to make sure you have everything like you want it - boot sequence etc.
Mine is absolutely picky about the ribbon cables - I had to make sure I didn't have cable select cables anywhere near it. And make sure the floppy, HD and CD are on the very end of the cables.
Last but not least, mine is running again - sort of - I can't get it to boot with my XP CD (which it did before), but it sure will boot up with a Linux CD - go figure.....
I believe I still have a minor BIOs problem because of that but I'm a Linux guy anyway.
Good Luck.......
 

https://forums.techguy.org/threads/ibm-300gl-wont-install-windows-hardware-issue.365892/
Relevancy 49.45%

I have just recently rebooted my Dell Inspirion N5110 with Windows 7 ultimate 32 bit. My laptop was originally running Windows 7 home 64 bit but my LAPTOPS HARDWARE IS 32 bit. Since rebooting after installation of Windows 7 32 bit. The network driver are not available when searched in Device Manager. Trying to find the right network drivers for my Laptop model but Dell support HAS ONLY the 64 bit network drivers available for download. So anybody been through similar problem?
Please help on installing the correct network driver.

A:Did not detect any networking hardware, Post Windows 7 32 bit install

Hi Welcome to Seven Forums .. Try the Drivers in the Link below they should work ...

Product Support | Dell US

http://www.sevenforums.com/drivers/336899-did-not-detect-any-networking-hardware-post-windows-7-32-bit-install.html
Relevancy 49.45%

Hi,

Hope this is the right forum.

Anyways, I have two computers, a desktop and laptop (Lenovo X60). I want to create an image of a clean Windows 7 installation, after some tweaks, (but without any extraneous applications installed) that is capable of being deployed onto both of these systems, so that instead of doing a custom install of Windows 7 and re-doing those little, time-consuming tweaks, I can just deploy this standard image of Windows 7 onto either of these machines when I want to do a "fresh" install.

My question is, is the correct way to do this to use the WAIK for Windows 7 and follow along the lines of these instructions? And that will be able to create an (standard but tweaked) image of Windows 7 I can use for multiple computers, even ones that have differing hardware?

Thanks.

A:Windows Automated Install Kit 7 - create image for different hardware

Yes, that is the recommended way to create Win7 Images, using MS tools.

You may want to check out this link for information about the sysprep and WAIK procedures. I found this guide helpful when we started our Win7 project here.
However, we've now gone a different route using Novell tools, which is unlikely that you will have access to.

Making images is what I do here, so I'l do my best to help you out as I can.
First off before I can though, does your windows license permit you to make an image for more than the purpose of a backup?

http://www.sevenforums.com/backup-restore/111791-windows-automated-install-kit-7-create-image-different-hardware.html
Relevancy 49.45%

I just installed a fresh copy of windows 8.1 on my Asus N53S laptop that comes stock with Windows 7 and now my keyboard shortcuts for volume do not work. Above the F1-F4 keys i have three buttons to mute, increase and decrease the volume which do not work. The keyboard shortcut's for muting, decreasing and increasing volume do not work either (Fn+F10-F12) but the shortcut for decreasing brightness and turning the screen off works (Fn+F5-F7) If there is any way to get this working again, I'd appreciate the help. Having to use the windows volume slider is a bit of a pain.

A:Hardware Buttons not working with fresh install of Windows

Did you download the chipset drivers for the laptop?

http://www.eightforums.com/drivers-hardware/44646-hardware-buttons-not-working-fresh-install-windows.html
Relevancy 49.45%

For some reason my boot drive is incredibly slow to boot and log on.  It's an SSD, and the CPU and Motherboard are new.  All the correct drivers are installed.  The event viewer is flooded with errors, but I have no idea how to interpret them

A:Fresh install of windows, slow boot, new hardware

Please use the following link to provide us with information about your computer so that we can assist you.How to Publish a Snapshot using Speccy Please download MiniToolBox  , save it to your desktop and run it. Checkmark the following checkboxes:  List last 10 Event Viewer log  List Installed Programs  List Users, Partitions and Memory size. Click on Go to start the scan.  Once it is finished highlight the text, copy it and paste it in your next post.

http://www.bleepingcomputer.com/forums/t/491431/fresh-install-of-windows-slow-boot-new-hardware/
Relevancy 49.45%

What happens post July 29th 2016 if my hard drive (or MoBo) crashes (as it just did) & i must use a new hard drive or MoBo: if mobo, will windows 10 ask for an activation code since there is new hardware installed? If yes, what will I use?

If a new hard-drive is required & I did not make a disk image copy - will I have to go back to my Window 7 disk to install W7 & keep W7? Is there way to reinstall W10 (free upgrade) post July 29th 2016 with an activation code for W10?

If new mobo is installed will W10 ask for an activation code? If yes, what will i use? Or even If i complete an image copy restore - after new hardware install will W10 ask for an activation code?

Thank you
Thinger

A:hardware crash - windows 10 install - activation question

After July 29th:

For a hard drive replacement, a clean install of Windows 10 will activate itself from the digital entitlement stored on Microsoft activation servers from the first upgrade. When the Windows 10 installation asks for a product key, just click "I don't have a product key", "skip", or "do this later".

For a motherboard replacement - if it is an upgrade, then you will either have to go back to your Windows 7 (if it is a retail version) or pay for the upgrade to Windows 10. If the motherboard replacement is the exact same model and replaced due to malfunction of the original, then call Microsoft and they will probably activate Windows 10 on the new motherboard for you for free.

http://www.tenforums.com/installation-setup/53524-hardware-crash-windows-10-install-activation-question.html
Relevancy 49.45%

i have recently bought a samsung rv s laptop last night i had an issue when i opened the web browser all i got was a blank white screen When i opened norton internet security it didn t open correctly with not being used to windows and only using Solved: install Lost after 7 & software windows hardware it for about a week i thought the best thing to do would be use the recovery disk that came with the laptop i thought it would just reset the computer to an earlier day not so it did a full install of windows Solved: Lost software & hardware after windows 7 install now i have no access to the internet webcam or any of the functions that were on the computer before hand the recovery disk doesn t have the drivers for any of the hardware on it all the pre installed software has vanished also So the question is where do i go now to get the machine back to the way it was when i bought it nbsp

A:Solved: Lost software & hardware after windows 7 install

Can you be more specific about the "recovery disk"? When I hear "recovery" I think of a set of Recovery DVDs (or CDs) that will "recover" the system back to factory defaults, including all drivers and bloatware. But you seem to be saying that maybe it's a Windows 7 Installation DVD.

You should be able to get the drivers from Samsung's web site. Install the chipset ones first.

So the question is where do i go now to get the machine back to the way it was when i bought it?Click to expand...

Many manufacturers will sell you a set of Recovery DVDs for a fair price.
 

https://forums.techguy.org/threads/solved-lost-software-hardware-after-windows-7-install.988353/
Relevancy 49.45%

My brother asked me to take a look at his on install installing this Windows issue computer's W7 cannot hardware computer because he was having issues with it Well he took it upon himself Windows cannot install on this computer's hardware issue installing W7 to fix the issues and corrupted the boot file I couldn't fix the issue so I saved whatever he wanted and did a fresh install of Windows Ultimate I get to the quot completing instillation quot phase and get this message quot Windows cannot install on this computer's hardware issue quot I went Windows cannot install on this computer's hardware issue installing W7 to the Microsoft site and it Windows cannot install on this computer's hardware issue installing W7 told me to download a driver downloaded the driver and that didn't help Then I tried the other method of changing the settings in BIOS from RAID to AHCI and IDE Still nothing I also get a blue screen saying that it has to do a memory dump so my next plan was to take out gigs of memory and leave the other gigs The computer does not have old hardware HP Pavilion Elite m t Desktop PC Product Specifications and Configurable Options HP Pavilion Elite m t CTO Desktop PC - HP Customer Care United States - English I'm going to see if I can get Ubuntu installed on the machine Any ideas

A:Windows cannot install on this computer's hardware issue installing W7

Well, I got Ubuntu to install and it is working, but I think I have an idea of what the issue might be. I'm guessing the GPU is getting hot (fan isn't spinning) so it is causing the issue when the video resolution changes. The PC just shuts down. So I am going to go buy another cheapy GPU and see if I have the same issue.

http://www.sevenforums.com/installation-setup/253082-windows-cannot-install-computers-hardware-issue-installing-w7.html
Relevancy 49.02%

Yesterday one of my computers began locking up while playing WoW It's freeze up and lots of random colored dots would appear about the screen I rebooted the computer and it happened again Then it began to happen even in Windows without doing anything but having the computer on After a few more crashes I found that the text and graphics on the startup hardware? - BSOD 7 Windows screens BIOS were garbled as well I thought maybe it's a RAM issue so I removed three of the four RAM sticks and left just one same issue So I removed that one and put in another of the RAM sticks which is of the same specs but a different brand exact same issue At this point I surmised that the video card memory might be corrupted We removed the GT MB that was in it and went and bought a GTS GB and tossed it in The BIOS screens were no longer garbled though the computer gave a quot BOOK DISK FAILURE quot error when trying to boot I used to have this problem on my main machine and oddly enough I could place either the Vista disc or Windows disc in the DVD drive and it boots fine WITHOUT booting from disc which makes no sense BSOD Windows 7 - hardware? to me but works I performed a startup repair and that didn't fix it but leaving the disc in the drive resolved the problem entirely as it had in the past on my main machine This method worked to get past the boot disk failure error I got into Windows however only a few minutes later it began to BSOD randomly and frequently I updated the NVIDIA drivers to no avail I reverted to standard MS video drivers also no go I ran the Windows built-in memory test and it came back clean with no errors I also uninstalled Avast Antivirus to ensure that wasn't interfering with the memory while I work through this A review of the memory dumps from the crashes showed many culprits a keyboard driver ntfs system file various nvidia drivers There was no consistency in the dump files that would lead me to a specific piece of software or hardware so at this point I thought it has to be memory I figure data is trying to write to some part of the memory and then causing a crash when it gets to a corrupt part I took out two sticks of RAM and left the other two in running in dual-channel mode The computer started up fine and I launched WoW and ran it all night without any problems I got in and used it this morning for a few minutes before work also no problems Now it's apparently exhibiting the same issues again though with less frequency my bf is at home while I'm still at work Tonight I will try the other two sticks of RAM in place of these two and see what happens During these BSODs and subsequent restarts I noticed a couple oddities on two occasions the computer would not post and instead gave a long beep followed by two short beeps The comp has a Pheonix BIOS and everything I read about Pheonix BIOS stop codes didn't appear to match the tone I heard at all yet the IBM standard post code set as well as other types of BIOS consistently said a long beep with two short beeps is a VGA problem This is on a brand new card though many times the computer would get to the point where it's supposed to bring up the Windows splash screen before it actually gets into Windows and instead quickly blip a blue screen and then reboot itself The next startup would then say it didn't shut down properly and recommend that I perform a startup repair which I would decline and the computer would proceed to load into Windows just fine Anyone have an idea of the possible culprit I'm curious if a failing motherboard or PSU could cause this type of issue Is the RAM still the likely offender Could drivers be the sole cause of this Could a faulty PSU corrupt RAM and VRAM thus ruining my previous video card and RAM at coincidentally the same time Any thoughts on which direction I should take this are appreciated Specs from memory Asus M N-SLI Deluxe AMD AthlonXP GB RAM x GB OCZ x GB Corsair all w identical specs and I think PC but can't remember for sure Therm... Read more

A:BSOD Windows 7 - hardware?

Just for the record as we look at various variables, what is the model of that Thermaltake power supply? Some of their supplies are really weak with the exception of the "Toughpower" series. Have you gone in the bios to look at the voltages and the temps, and if not, do that and report them back.

http://www.techsupportforum.com/forums/f299/bsod-windows-7-hardware-487940.html
Relevancy 49.02%

Hey all First post here Apologies if I mess something up Hardware Upgrade Fresh Random and Windows Install BSODs after Going to include all of the information I can at the top and work from there Current build Intel Core i - K EVGA GeForce GTX Ti Fractal Design Define R Black - xnaasDT - xnaas amp s Saved Part List - PCPartPicker Old build until I update my site Desktop Specs Dump files https p xnaas me - - ziphttps p xnaas me - - ziphttps p xnaas me - - zip How this started So I was running Random BSODs after Hardware Upgrade and Fresh Windows Install on my old build just fine Random BSODs after Hardware Upgrade and Fresh Windows Install I wanted to upgrade from an i to make streaming hurt a bit less and maybe experiment around with some server stuff Anyway I went to Fry's on Sunday and bought everything I got Windows installed and everything the following day Feb where the first BSOD occurs When I installed Windows I completely wiped my SSD and did a new install of Windows Pro via USB Installed all my drivers and thought everything would be good to go BSOD on day I thought it couldn't be too big of a deal and went on Where we are now Now I've gotten BSODs I cannot get another one to happen I ran memtest overnight and my RAM completed passes with errors I know this isn't a sure way to know that the RAM is fine but it seems like a pretty good indicator Granted it's Patriot which is like the lowest tier of RAM so it's very likely I just have faulty RAM I've attached SSD and RAM support lists Technically neither is on the list but it seems unlikely that this is the cause Other similar Patriot memory is supported and the smaller version of my SSD is supported All of my drivers are up to date from Nvidia Intel and Gigabyte SSD firmware is up to date Periphels have up-to-date drivers as well I can't see an out-of-date driver being the issue here although my BSODs would seem to indicate that is the case unless there is an obvious hardware failure What to do I have days from Sunday to take anything in for a full refund or swap If this is a hardware issue I'd like to go in and get it remedied immediately If this is a driver issue I'm not really sure what I can do I can't get the BSODs to happen they just happen when they do All of my drivers firmware BIOS etc are up-to-date Should I do a fresh install of Windows again and work from there ----- Any and all feedback ideas etc is greatly appreciated

A:Random BSODs after Hardware Upgrade and Fresh Windows Install

I should add that I have found no corruption in windows running
Code:
sfc /scannow
or various
Code:
DISM
commands. CHKDSK also returned back to me clean.

http://www.tenforums.com/bsod-crashes-debugging/39823-random-bsods-after-hardware-upgrade-fresh-windows-install.html
Relevancy 49.02%

Hey all First post here Apologies if I mess something up Going to include all of the information I can at the top and work from there Current build Intel Core i - K EVGA GeForce GTX Ti Fractal Design Define R Black - xnaasDT - xnaas amp s Saved Part List - PCPartPicker Old build until I update my site Desktop Specs Dump files https p xnaas me - - zip https p xnaas me - - zip https p xnaas me - - zip How this started So I was running on my old build just fine I wanted to after Upgrade Random Windows Hardware Install and Fresh BSODs upgrade from an i to make streaming hurt a bit less and maybe experiment around with some server Random BSODs after Hardware Upgrade and Fresh Windows Install stuff Anyway I went to Fry's on Sunday and bought everything I got Windows installed and everything the following day Feb where the first BSOD occurs When I installed Windows I completely wiped my SSD and did a new install of Windows Pro via Random BSODs after Hardware Upgrade and Fresh Windows Install USB Installed all my drivers and thought everything would be good to go BSOD on day I thought it couldn't be too big of a deal and went on Where we are now Now I've gotten BSODs I cannot get another one to happen I ran memtest overnight and my RAM completed passes with errors I know this isn't a sure way to know that the RAM is fine but it seems like a pretty good indicator Granted it's Patriot which is like the lowest tier of RAM so it's very likely I just have faulty RAM I've attached SSD and RAM support lists Technically neither is on the list but it seems unlikely that this is the cause Other similar Patriot memory is supported and the smaller version of my SSD is supported All of my drivers are up to date from Nvidia Intel and Gigabyte SSD firmware is up to date Periphels have up-to-date drivers as well I can't see an out-of-date driver being the issue here although my BSODs would seem to indicate that is the case unless there is an obvious hardware failure What to do I have days from Sunday to take anything in for a full refund or swap If this is a hardware issue I'd like to go in and get it remedied immediately If this is a driver issue I'm not really sure what I can do I can't get the BSODs to happen they just happen when they do All of my drivers firmware BIOS etc are up-to-date Should I do a fresh install of Windows again and work from there ----- Any and all feedback ideas etc is greatly appreciated

A:Random BSODs after Hardware Upgrade and Fresh Windows Install

Please delete this thread. I realize now I just posted into the Windows 7 forums instead of 10. Oops!

http://www.sevenforums.com/bsod-help-support/390930-random-bsods-after-hardware-upgrade-fresh-windows-install.html
Relevancy 48.59%

Hello I'm posting here because after a series of days trying to solve the problem I went back to starting point BSOD Dateails of error after machine characteristics OS - Win pro x What was the original installed OS on sthe ystem Win pro Is the OS an hardware 7 BSOD with Windows not and related OEM version came pre-installed on system or full retail version YOU purchased it from retailer came installed with Win pro Approximate age of system hardware yo Approximate age of OS installation if you know yo Have you re-installed the OS no CPU i Video Card Saphire HD MotherBoard if NOT a laptop Asus turbo V Power Supply - brand amp wattage if NOT a laptop BSOD related with Windows 7 and not hardware Antec W System BSOD related with Windows 7 and not hardware Manufacturer Keynux Exact model number if laptop check label on bottom P Desktop mid tower Windows working fine up to here start lagging becoming slower and slower after week of point I boot the pc and windows logo shows up and after a minute or so it freezes and gives a BSOD c a the windows subsystem process terminated etc etc c xfd ab x b e this problem was never solved so I send the HD BSOD related with Windows 7 and not hardware sata Tb to a professional that open in clean room he also clean the wallet and made a clone in another HD meanwhile I try old clone done years ago in another HD and it boots fine and windows works nice But this clone lacks many programs installed since then and data I get the new cloned HD from the guy the also cleaned my walletl and I try to boot I do see the windows logo and short after I get the BSOD with message stop c the instruction at x reference memory at etc etc hardware works all fine because I put back old cloned HD and everything works fine I did run times chkdsk r and it finds Kb in bad sectors not much I cannot boot the disk at all but I can see its contend with gparted I really need to restore the Windows because I cannot get back some of the programs installed since old clone very expensive and intricate connections for professional use Can this windows error be overcome Please help if you think the problem can be solved I'm puzzled that the new expensive clone has a error that prevents it to boot Many Thanks

A:BSOD related with Windows 7 and not hardware

Hi, are you able to boot into Safe Mode?

Start your computer in safe mode - Windows Help

http://www.techsupportforum.com/forums/f50/bsod-related-with-windows-7-and-not-hardware-1004442.html
Relevancy 48.59%

Hello,

I am currently having a BSOD between 1-2 times a day.

custom built my pc about a month ago.

I have run memtest achieved 10+ passes without a problem.

stress tested GPU as the PNY is known to have issues, which i found out after purchase, but no reaction to the stress test.

increased the voltage for the cpu to allow for extra room for the cpu

Windows 7? 64-bit
? Windows 7
? OEM as I made it myself
? less than a month
? less than a month
? intel i5-2500k 3.3ghz oced to 4.6ghz bought as a pre-overclocked bundle
? PNY GEFORCE gtx570
? asus p8z68-v gen3
? CoolerMaster 1000w Silent Pro Gold
? custom built

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 2057

Additional information about the problem:
BCCode: 124
BCP1: 0000000000000000
BCP2: FFFFFA8007903028
BCP3: 00000000BE200000
BCP4: 000000000005110A
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

this is one of the error codes i get, the other one being different in BCP2

BCP2: FFFFFA80111B6028

Cheers

A:BSOD Windows 7 hardware issues

Quote:




Symptom: Device is disabled.
Cause: A device is disabled preventing it from working properly.
Details: The device, D-Link AirPlus G DWL-G510 Wireless PCI Adapter(rev.C), is disabled. If this device is no longer used it may be intentionally disabled. The Plug and Play ID for this device is PCI\VEN_1814-DEV_0302-SUBSYS_3C091186-REV_00\5-D93DF5B-0-0800E6.
Resolution: 1. Determine if you need the device.
2. If you need the device, enable it in Device Manager.
3. If you do not use the device it can be left disabled.




Also

Quote:




WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa801121b028, Address of the WHEA_ERROR_RECORD structure.
Arg3: 00000000be200000, High order 32-bits of the MCi_STATUS value.
Arg4: 000000000005110a, Low order 32-bits of the MCi_STATUS value.

Debugging Details:
------------------

TRIAGER: Could not open triage file : C:\x86\triage\modclass.ini, error 2

BUGCHECK_STR: 0x124_GenuineIntel

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

PROCESS_NAME: System

CURRENT_IRQL: f

STACK_TEXT:
fffff880`0337aa58 fffff800`03013a3b : 00000000`00000124 00000000`00000000 fffffa80`1121b028 00000000`be200000 : nt!KeBugCheckEx
fffff880`0337aa60 fffff800`031d6c43 : 00000000`00000001 fffffa80`1121cea0 00000000`00000000 fffffa80`1121cef0 : hal!HalBugCheckSystem+0x1e3
fffff880`0337aaa0 fffff800`03013700 : 00000000`00000728 fffffa80`1121cea0 fffff880`0337ae30 fffff880`0337ae00 : nt!WheaReportHwError+0x263
fffff880`0337ab00 fffff800`03013052 : fffffa80`1121cea0 fffff880`0337ae30 fffffa80`1121cea0 00000000`00000000 : hal!HalpMcaReportError+0x4c
fffff880`0337ac50 fffff800`03012f0d : 00000000`00000004 00000000`00000001 fffff880`0337aeb0 00000000`00000000 : hal!HalpMceHandler+0x9e
fffff880`0337ac90 fffff800`03006e88 : fffff880`03372180 fffff880`03372180 00000000`00000000 00000000`00000000 : hal!HalpMceHandlerWithRendezvous+0x55
fffff880`0337acc0 fffff800`030c562c : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : hal!HalHandleMcheck+0x40
fffff880`0337acf0 fffff800`030c5493 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KxMcheckAbort+0x6c
fffff880`0337ae30 fffff800`030cc3d2 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiMcheckAbort+0x153
fffff880`0339a420 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiDeferredReadyThread+0x2c2


STACK_COMMAND: kb

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: GenuineIntel

IMAGE_NAME: GenuineIntel

DEBUG_FLR_IMAGE_TIMESTAMP: 0

FAILURE_BUCKET_ID: X64_0x124_GenuineIntel_PROCESSOR_CACHE

BUCKET_ID: X64_0x124_GenuineIntel_PROCESSOR_CACHE

Followup: MachineOwner




That's a bad sign of Processor Failure, fix the first and then see if that fixes it, otherwise go new PC shopping, Processors cost almost 1/3rd the cost of a new computer if it's a decent Processor.

http://www.techsupportforum.com/forums/f299/bsod-windows-7-hardware-issues-640812.html
Relevancy 48.59%

I have a problem trying to install Windows 2000 Pro ever since I got my new motherboard: After it reboots to inspect my computer's hardware configuration, it freezes. It does not respond to any of the function keys. I've unplugged all the cards on the motherboard and the CD-ROM and there is no effect, so none of this hardware seems to be causing problems.

I have a Gigabyte 7IXE motherboard with 128 MB DIMM. Windows 2000 Pro install and ran perfected on my old, but now defunct, board.

Thanks.

Alex
 

A:Windows 2000 install problem: freeze on inspecting hardware configuration

https://forums.techguy.org/threads/windows-2000-install-problem-freeze-on-inspecting-hardware-configuration.41674/
Relevancy 48.59%

I have a problem trying to install Windows 2000 Pro ever since I got my new motherboard: After it reboots to inspect my computer's hardware configuration, it freezes. It does not respond to any of the function keys. I've unplugged all the cards on the motherboard and the CD-ROM and there is no effect, so none of this hardware seems to be causing problems.

I have a Gigabyte 7IXE motherboard with 128 MB DIMM. Windows 2000 Pro install and ran perfected on my old, but now defunct, board.

Thanks.

Alex
 

A:Windows 2000 install problem: freeze on inspecting hardware configuration

https://forums.techguy.org/threads/windows-2000-install-problem-freeze-on-inspecting-hardware-configuration.41674/
Relevancy 48.59%

I Windows 39 hardware after install Imaging XP centralized repair code driver hope this post is in the right place If not I apologize Hi everyone I m having some problems with my Windows XP SP desktop computer after a crash a few weeks ago I took the computer in and had it repaired the people said they did a repair installation of windows which I had tried myself and failed After a little tweaking it seems to be back to normal except for two things my webcam and my scanner needed to be re-installed only re-installing them gave me the message quot There was a problem when installing your new hardware Your new hardware might not work properly quot and now my webcam program bundled with the webcam quot amcap quot and my scanner program quot Scanwizard quot both say that I don t have the respective hardware attached to my computer when I try and run them I have tried uninstalling the hardware and restarting then re-installing them and have had no success I don t know what I m doing wrong and I would greatly appreciate some advice and or technical help Thanks in advance Jomon nbsp

A:Imaging hardware centralized driver code 39 after Windows XP repair install

The repair install might not have been the right thing to do. You may be dealing with partial drivers left-overs... You might try using a "driver cleaner" and see if to can remove these partial drivers
 

http://www.techspot.com/community/topics/imaging-hardware-centralized-driver-code-39-after-windows-xp-repair-install.175623/
Relevancy 47.73%

i just bought an nvidia Ge force 9400 gt and tried installing the drivers and i get an error message that says
(the nvidia setup program has detected that one or more Microsoft hardware installation wizards are active. do you want to continue with setup? click yes to minimize setup until you complete or cancel the other installation wizard(s). click no to exit setup.)
the installation wizard is trying to automatically install the hardware but if i go into control panel/administrative tools/plug and play and disable plug and play like i was told, the program says that there is no available graphics adapter but the original error message telling me other installation programs are running is gone. how am i supposed to install these drivers if windows is trying to install them with another program? How can i disable hardware install wizard so that it doesnt disable the graphics adapter PLEASE HELP!
 

A:Windows hardware installation manager overrides my Nvidia Geforce 9400 GT install

Follow these steps to install your new graphics card:

1. Download the latest drivers for your card. Clean all old video drivers from your system. You may use Driver Sweeper if you wish.
2. Shut your PC down and put the new GPU in the motherboard slot.
3. Start up the system and change your primary graphics adapter in BIOS to PCI-E (assuming you have a PCI-E card) or PCI / AGP.
4. After logging in to Windows just close the Hardware Installation Wizard when it comes up. Double click on the drivers you downloaded and it should be installed without any issues.
 

http://www.techspot.com/community/topics/windows-hardware-installation-manager-overrides-my-nvidia-geforce-9400-gt-install.145908/
Relevancy 47.73%

Hey if anyone can help me with this my brand new machine is crashing multiple hardware new BSOD's!!! Windows 7 + constant = brand times over the day and it s driving me crazy Here s the short version of the story Bought a brand new system specs below Windows 7 + brand new hardware = constant BSOD's!!! and got windows bit installed with Windows 7 + brand new hardware = constant BSOD's!!! it After a couple days of having it home I started to experience BSOD s very randomly Usually it tended to be if I started the system left it idle for minutes it would crash after which I could start it and it would stay on and idle all day without issue However as the days went by the BSOD s became more frequent sometimes crashing times in a row before the system would start up and crashing both while idle and while actively on the Windows 7 + brand new hardware = constant BSOD's!!! machine Took the system back to the store They wiped the hard drive and ended up replacing the motherboard They told me the system was running for several days without issue and so I picked it up and brought it home It s been with me now for days and I m facing the exact same problem I was before constant BSOD s as frequent as they were before I figure this has to be a driver problem something I have installed that the machine doesn t like but since I got the system back I haven t installed very much at all I ll list the programs below After the last crash now the computer is trying to boot from the CD-ROM by default and won t boot windows unless I mash on F and select the hard drive If anyone can help me out I m going kinda crazy here buying a brand new machine and having it constantly crash is rather frustrating I ve read a few people having similar problems that seem to have been solved by upping the voltage being supplied to the RAM but I really don t want to mess with those settings without a little insturction first so if anyone thinks it d help I could try it out Here are my specs any help would be great appreciated Thanks in advance Intel Core i GHz Quad-Core -bit Asus P T Motherboard Corsair TripleX XMS GB kit x GB DDR x GB total RAM LG Electronics Super Multi Double Layered x DVD Writer x Seagate Barracude GB HD QuadroFX Windows Home Premium Edition Bit In addition to that I also have an older GB hardrive hooked into the system Other than the drivers for these the only other programs I have installed are Firefox Windows Live iTunes Quicktime Maya and zBrush and AVG The one clue I have is when I got the system home for the nd time the very first thing I did was update the graphic card drivers and when I tried that I got a BSOD but after restart them I was able to install fine I m quite positive they are the correct drivers but who knows So after that longer than intended post can anyone offer any advice nbsp

Relevancy 47.73%

Brand new computer All hardware is bought new So I installed Windows on my new PC for the first time I've had numerous BlueScreens I've attached all the minidump files I've got so far and all I'm asking is for someone to analyze them for me before I try to reinstall Windows I really want to know where the error comes from I'd really appreciate it and would save a new in - 64 Ultimate hardware! Windows BSoD 7 brand lot of time I've tried to BSoD in Windows 7 Ultimate 64 - brand new hardware! use Windbg to analyze the dmp files BSoD in Windows 7 Ultimate 64 - brand new hardware! myself but I'm not familiar with the program and don't really have the expertise needed I've had two different BlueScreen types so far quot DRIVER IRQL NOT LESS OR EQUAL quot quot Page Fault in Non Paged Area quot The BSoD usually happens when I'm playing Heroes of Newerth it seems to happen at a random point of the game I once had the BSoD appear right before completing an installation of another game I've checked all my drivers and according to Windows Device Manager they're all up to date OS Windows Ultimate List of hardware CyberLink DVD Suite Channel OEM CD for XP Vista Windows ASUS P Q SE P Socket- DDR ATX GbLAN ICH PCI-Ex Intel Core Quad Q Quad Core Ghz Socket MB W Mhz Gainward GeForce GTS GB PhysX CUDA PCI-Express GDDR DVI native-HDMI HDCP Lite-On DVD RW burner IHAS - SuperAllWrite x x DVD RW SATA Black Corsair Value S BSoD in Windows 7 Ultimate 64 - brand new hardware! PC DDR GB Kit w two matched Value Select MB Seagate Barracuda GB SATA- MB RPM CNet Wireless-G PCI Mbps g WPA AES WPA RP-SMA Please take a look at the Minidump files And if you need any more information I'll be happy to provide it Thanks in advance EDIT The RAM was the problem I've replaced the RAM units with my old units and it seems to work now Thank you everyone

A:BSoD in Windows 7 Ultimate 64 - brand new hardware!

Could someone who knows more about BSODs than me please correct/confirm this?

Try opening an elevated command prompt and running sfc /scannow.

http://www.sevenforums.com/bsod-help-support/59202-bsod-windows-7-ultimate-64-brand-new-hardware.html
Relevancy 47.73%

Hello I'm posting here because after a series of days trying to solve the problem I went back to starting point BSOD Dateails of error after machine characteristics OS - Win pro x What was the original installed OS on sthe ystem Win pro Is the OS an OEM version came pre-installed on system or full retail version YOU purchased it from retailer came installed with Win pro Approximate age of system hardware yo Approximate age of OS installation if you know yo Have you re-installed the OS no CPU i Video Card Saphire HD MotherBoard if NOT a laptop Asus turbo V Power Supply - brand amp wattage if NOT a laptop Antec W System Manufacturer Keynux Exact model number if laptop check label on bottom P Desktop mid tower Windows working fine up to here start lagging becoming slower and slower after week of point I boot the pc and windows logo shows up and after a minute or so it freezes and gives a BSOD c a the windows subsystem process terminated etc etc not hardware BSOD with 7 software related Windows c xfd ab x b e this problem was never solved so I send the HD sata Tb to a professional that open in clean BSOD related with Windows 7 software not hardware room he also clean the wallet and made a clone in another HD meanwhile I try old clone done years ago in another HD and it boots fine and windows works nice But this clone lacks many programs installed since then and data I get the new cloned HD from the guy the also cleaned my walletl and I try to boot I do see the windows logo and short after I get the BSOD with message stop c the instruction at x reference memory at etc etc hardware works all fine because I put back old cloned HD and everything works fine I did run times chkdsk r and it finds Kb in bad sectors not much I cannot boot the disk at all but I can see its contend with gparted I really need to restore the Windows because I cannot get back some of the programs installed since old clone very expensive and intricate connections for professional use Can this windows error be overcome Please help if you think the problem can be solved I'm puzzled that the new expensive clone has a error that prevents it to boot Many Thanks PS I can access to the new clone disk from another hard drive with linux fedora

A:BSOD related with Windows 7 software not hardware

Quote:
Please help if you think the problem can be solved.


Some information about the BSOD is needed. Provide a camera snap of the BSOD screen at least which will give the onscreen codes.

http://www.sevenforums.com/bsod-help-support/372400-bsod-related-windows-7-software-not-hardware.html
Relevancy 47.73%

I've been trying to install Vista Bit for many days now with no luck I've been getting all types of bluescreens while installing Off the Hardware BSOD Windows Nightmare 64 Bit Vista top of my head I can remember x c and x Since I've been getting these bluescreens I've been frequenting these forums I think I've tried everything I've tried going Windows Vista 64 Bit Hardware BSOD Nightmare into the BIOS Windows Vista 64 Bit Hardware BSOD Nightmare and disabling pretty much anything that didn't have anything Windows Vista 64 Bit Hardware BSOD Nightmare to do with the computer actually functioning including my USB mouse among other BIOS settings I've tried to configure I've also flashed my BIOS with the latest BIOS version I've tried using different DVD drives and hard drives with no luck I've even purchased new Kingston DDR Mhz ram If anyone can please look into my issue and shed some light on this I'd really appreciate it My hardware specs Kingston GB Mhz ram Maxtor Gb Hard drive R LO Intel Dual Core GHZ PC Chips P G MOBO with new BIOS updates Mb ATI Radeon Pro AGP with new Vista drivers on CD which I always remove during instillation

A:Windows Vista 64 Bit Hardware BSOD Nightmare

Hi mate.

I did some googleing and found some clues.

The 0x9c error seems to be related to a bug in hardware (since you have changed your RAM, maybe your CPU is having troubles?)
However I could only find stopreasons for 32bit CPU's and Itanium CPU's.

On the 0x124 error I found some info on (yet again) hardware error and it is recommended to try updating all i\o drivers (videocard, soundcard, chipset, etc)

Good luck, see if you can write down any more specific bluescreens.

http://www.vistax64.com/drivers/55042-windows-vista-64-bit-hardware-bsod-nightmare.html
Relevancy 47.73%

Hi,

I'm new to this sort of thing so please bear with me. I have a Windows 7 64bit computer and I keep getting a BSOD. The dumps all tell me that I have a hardware error but I can't isolate it. I have swapped out my RAM chips, disabled my NIC, swapped out my video cards and I keep getting the same error. Attached is my analysis from the Microsoft Diagnostic and Recovery Tool. Let me know if you need anything else?

A:BSOD - Windows 7 64bit - Hardware Error 124

Welcome!

Have you tested your hard drive? Go to the manufacturer's site and download their advanced diagnostic tools.

Also, are you overclocking? If so, stop, and see if the problem goes away. If you are running RAID, try updating the drivers.

Good luck!

~JK

http://www.sevenforums.com/bsod-help-support/62131-bsod-windows-7-64bit-hardware-error-124-a.html
Relevancy 47.73%

I have an older desktop Compaq Presario SR5707C circa '08 originally ran windows vista upgraded to windows 7 motherboard is a MCP61PM-HM (Iris8) NVIDIA GeForce 6150SE nForce 430 onboard graphics AMD Athlon X2 4850e processor power supply 250w brand unknown problem: originally froze with vertical lines appearing on screen. was having hangup issues. Now either freezes ourtright or restarts itself or gives BSOD.

http://www.bleepingcomputer.com/forums/t/600076/bsod-windows-7-older-compaq-hardware/
Relevancy 47.73%

The evening of Wednesday th July I was playing World of Warcraft on my Windows XP Home Edition laptop when the graphics froze the sound glitched then I got a BSOD for about half a second before the screen went black I rebooted but got another BSOD I restarted the computer again got to the login screen typed the first character of my password and the screen went black Over the next few attempts BSOD Windows XP on hardware - possibly failure I determined that generally using the mouse was ok but sometimes the screen hung Attempting to type in my password invariably resulted in either a hang or the screen going black The following morning once the laptop had cooled down I was able to log in I BSOD on Windows XP - possibly hardware failure shut the lid and left it That evening I was able to log on and played World of BSOD on Windows XP - possibly hardware failure Warcraft very briefly without trouble This morning I logged on and had been playing World of Warcraft for perhaps minutes when I got another BSOD Same routine as before I left the computer for a few hours then logged on without trouble downloaded the tools BSOD on Windows XP - possibly hardware failure to capture system issues as listed at World of Warcraft crash destroyed operating system While running the tool I noticed it reporting two mini-dumps and when I checked them they were both from the Wednesday night None from a few hours before While the tool was still running I got another BSOD Where do I go from here I can't get the tool to run to completion without getting a BSOD I may be able to get the minidumps off the computer and separately extract other information bit by bit too It'll take ages as I'll have to allow perhaps an hour between each attempt and I have a life so can't spend all day doing this Any ideas I suspect hardware failure as I hadn't updated any software or drivers recently or changed any software settings It would be nice if I copuld identify what has failed before I take the laptop for a very expensive repair

A:BSOD on Windows XP - possibly hardware failure

You could test the hard drive yourself, that would be a good starting point.
You'll need to download the ISO CD-image from the drive maker's website, create a CD from that ISO file, then boot your laptop from it and run the test.

First determine what brand the drive is, then download the appropriate ISO file from the manufacturer. The links are at the top of this page: Hard Drive Diagnostics Tools and Utilities (Storage) - TACKtech Corp.

PS: Don't download the Windows version of the testing software because that will be of no use to you if Windows is currently unstable or won't run properly.
You need to download the version for DOS which is supplied as an ISO file.

http://www.techsupportforum.com/forums/f10/bsod-on-windows-xp-possibly-hardware-failure-585725.html
Relevancy 47.73%

the model for this is Aspire M with the default hardware inside Windows Home Premium Intel R Core TM i CPU GHz GHz GB RAM -bit operating system current hardware issue intel R LF- Gigabit Network Connection After a proper shutdown and some hours of rest for the CPU i turned it on and found that my LAN Wired connection was not connected upon startup there's no PC activity on the modem itself Modem is working fine Eternet cable is working fine i had used the same modem and cable for my laptop internet runs fine there's PC activity this would mean that the problem for my no access for LAN connection would windows to BSOD 7 issue relating hardware be hardware issue in the CPU itself upon opening device manager intel R LF- Gigabit Network Connection seems not abled to function as per normal a note 'Device is not working properly ' i tried using window's troubleshooter to resolve the issue issue resolved as stated but there's still no access to internet through lan connection even it says 'Device is working properly' Problem signature Problem Event windows 7 BSOD relating to hardware issue Name BlueScreen OS Version Locale ID Additional information about the problem BCCode BCP FFFFF DD BCP BCP FFFFF BCP OS Version Service Pack Product Files that help describe the problem C Windows Minidump - - windows 7 BSOD relating to hardware issue dmp C Users himura AppData Local Temp WER- - sysdata xml Read our privacy statement online Windows Privacy Statement - Microsoft Windows If the online privacy statement is not available please read our privacy statement offline C Windows system en-US erofflps txt

A:windows 7 BSOD relating to hardware issue

  
Quote: Originally Posted by himurak


the model for this is Aspire M7720. with the default hardware inside.

Windows 7 Home Premium
Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz 2.67GHz
6.00GB RAM
64-bit operating system


current hardware issue : intel(R) 82567LF-2 Gigabit Network Connection

After a proper shutdown and some hours of rest for the CPU, i turned it on, and found that my LAN(Wired) connection was not connected upon startup, there's no PC activity on the modem itself.

Modem is working fine, Eternet cable is working fine. i had used the same modem and cable for my laptop, internet runs fine, there's PC activity.

this would mean that the problem for my no access for LAN connection, would be hardware issue in the CPU itself. upon opening device manager, intel(R) 82567LF-2 Gigabit Network Connection seems not abled to function as per normal, a note 'Device is not working properly.' i tried using window's troubleshooter to resolve the issue. issue resolved as stated, but there's still no access to internet through lan connection. even it says 'Device is working properly'.
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 50
BCP1: FFFFF880030DD020
BCP2: 0000000000000000
BCP3: FFFFF88010028978
BCP4: 0000000000000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\032310-46035-01.dmp
C:\Users\himura\AppData\Local\Temp\WER-65567-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt



Good diagnosis. This crash was caused by your e1y62x64.sys
which is part of your Intel network driver. I would download a fresh copy and install it.

I would also run a system file check to verify and repair your system files too do that type cmd in search>right click and run as admin>sfc /scannow (not the space between sfc and ".")

If you are overclocking stop.

Let us know if you need help

Ken

http://www.sevenforums.com/bsod-help-support/73170-windows-7-bsod-relating-hardware-issue.html
Relevancy 47.73%

Been having problems with this new ITX system. Changed motherboard 4 times, changed CPU once. In order to keep it short, I won't elaborate on the problems happened in the last 3 times.

This time around, I get 3 BSODs within a day after installing new motherboard and freshly installed Windows 7 64-bit. The third BSOD happened while running the dump & system collection app.

The necessary files are attached. Additional info below:

Is Windows 7 . . .
- x64
- Reinstalled OS on the system
- OEM version of Windows 7 (disc given)
- Age of hardware: Less than a month (motherboard is only one-day old)
- Age of OS: Less than one-day old

Please help to shed some light on what's wrong.

Thank you very much.

Cheers,
Lorika

A:BSOD - Fresh Hardware & Windows 7 Installation

Hi,

What Model PSU are you using?

The dump files do not point to a 3rd party driver as a probable cause, meaning that it is either a "hidden" driver or hardware. As your drivers look ok, and you have re-installed several times I suspect hardware on this one.

Run a memtest yet?





Quote:
Memtest - Instructions:

Download the ISO (or the .exe for USB drives) from here Memtest86+ - Advanced Memory Diagnostic Tool

Then (if you have chosen the ISO) burn the ISO using IsoRecorder: ISO Recorder v3 Download (How to use IsoRecorder)

Boot from the CD/USB and run the test (at least 7 passes per test) with only one stick of RAM in place at a time.

It is a time consuming process but it is the only way to be sure it isn't a RAM fault.

For your final test, run the test with all the RAM in place.


Regards,
Reventon

BUGCHECK SUMMARY
Code:

Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Debug session time: Wed Jul 28 22:40:50.601 2010 (GMT+12)
System Uptime: 0 days 1:07:18.835
BugCheck 3B, {c0000005, fffffa8004e784d1, fffff880071fece0, 0}
Probably caused by : ntkrnlmp.exe ( nt!KiSystemServiceHandler+7c )
BUGCHECK_STR: 0x3B
PROCESS_NAME: WmiPrvSE.exe
??????????????????????????????????????????????????????????????????????????????????????
Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Debug session time: Wed Jul 28 19:45:36.793 2010 (GMT+12)
System Uptime: 0 days 1:24:04.981
BugCheck 3B, {c0000005, fffff80002bea42e, fffff88006d195d0, 0}
Probably caused by : ntkrnlmp.exe ( nt!ObpCloseHandleTableEntry+3e )
BUGCHECK_STR: 0x3B
PROCESS_NAME: explorer.exe
??????????????????????????????????????????????????????????????????????????????????????
Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Debug session time: Wed Jul 28 17:37:28.869 2010 (GMT+12)
System Uptime: 0 days 1:03:47.103
BugCheck A, {fffffa802445e4a2, 2, 0, fffff800028db077}
Probably caused by : ntkrnlmp.exe ( nt!KiInsertTimerTable+157 )
BUGCHECK_STR: 0xA
PROCESS_NAME: System
??????????????????????????????????????????????????????????????????????????????????????

http://www.sevenforums.com/bsod-help-support/100350-bsod-fresh-hardware-windows-7-installation.html
Relevancy 47.3%

Hey this is my first time posting here but I'm familiar with BSOD's fault. hardware during Windows bootup, suspecting forums and such Well I might as well describe my problem I have a HP Pavilion dv ca laptop running Windows Vista Home Premium CPU AMD Turion X GHz Graphics Card NVIDIA GeForce Go M RAM Gb DDR Well Windows BSOD's during bootup, suspecting hardware fault. this all started out a few weeks ago I was busy doing my normal stuff browsing the web talking to my friends on Skype and listening to music in iTunes when I get a notification for an update to bring iTunes up to I did the update and the process went smoothly But then things started to go horribly wrong for me During the reboot sequence Vista blue screened and went into autorestart Unfortunately I was unable to make out what the message said During POST everything was fine but when Vista tried to boot up I chose start Windows Normally when it gave me the option to it blue screened yet again during this bootup and restarted So in a rut I quickly hit f and managed to get into boot options Naturally I tried to get into safe mode BUT that's when things started to get weird It tried to boot but I got absolutely no GUI at all Explorer exe somehow didn't load up properly or anything My mouse was working as the pointer was up and I could move it around and everything but behind it was just a black screen Nothing else at all Frustrated I hard rebooted and did a system restore BUT during the restore I chose a restore point that was set the day before it gave me a message saying that the restore point could not be used please use another one That was an odd one So I fiddled around with the different restore points until I found a good one that was set before the iTunes install But then this is when things got really weird Windows finally managed to boot properly and I could get into my desktop But then I noticed that the internet wasn't connecting I tried to connect manually but Windows kept saying that the dependency group service could not be started This was getting a little odd So I tried to start it manually by going into My Computer BUT when I tried to do that Windows told me that it couldn't start it up at all and then afterwards I got BSOD' yet again Frustrated and going through a horrible anxiety attack my schoolwork and personal files are on this laptop here and I'm not one for backing up on a regular basis I tried doing another system restore THIS time it seemed to have worked out ok cause now the services had managed to get working again I'm typing this up right now on said laptop because everything's stable at the moment However I'm suspecting that Windows won't boot up right if I do a restart and go through the whole cycle yet again leaving me in an anxious mess Since I have no idea where the BSOD report dump is I checked the reliability monitor and it gave me this http i photobucket com albums a ityReport jpg - Part http i photobucket com albums a ityReport jpg - Part http i photobucket com albums a ityReport jpg - Part http i photobucket com albums a ityReport jpg - Part So finally my question is what just happened How did iTunes do this DID iTunes do this Is my computer still properly stable Is a Vista reinstall in my future I need some help making sense out of my situation I appreciate you guys taking the time to read this

A:Windows BSOD's during bootup, suspecting hardware fault.

UPDATE: A friend of mine that's CompTIA A+ Certified took a look at the computer finally and ran some memtests; turns out that there was a bad stick of RAM that was doing this. I'm grabbing another 1 gig stick during the weekend, so that'll be fine now.

This topic can now be closed. :)

http://www.techsupportforum.com/forums/f299/windows-bsods-during-bootup-suspecting-hardware-fault-309627.html
Relevancy 47.3%

Hello I have often used these forums to answer my questions and am a long-time lurker but have never posted I need help and am at the end of my technical knowledge with this computer I purchased a refurbished HP p f and shortly after I got it it began to have frequent BSOD I contacted HP and sent it in for repair and the motherboard was replaced This did not improve the problem I reinstalled the OS Windows home premium from the system recovery disks 7 Help! Windows despite Need minidumps changes, attached BSOD Recurrent hardware and continued to have frequent BSODs even before I installed other programs or devices Thinking it was most likely a hardware problem given the clean factory install I have tried swapping out the power supply RAM and video card None of these hardware changes improved the BSOD issue I have reverted the system back to its original hardware I have run diagnostics on the hard drive which have Need Help! Recurrent BSOD Windows 7 despite hardware changes, minidumps attached always passed I don t know what else to do Please help Thanks so much System specs and link to minidump files below Processor GHz AMD Phenom II X Memory GB DDR Storage TB hard drive Optical Drive DVD RW Graphics Integrated ATI Radeon HD Operating Need Help! Recurrent BSOD Windows 7 despite hardware changes, minidumps attached System Windows Home Premium -bit https skydrive live com redir aspx cid ba eae e eb c amp resid BA EAE E EB C nbsp

https://forums.techguy.org/threads/need-help-recurrent-bsod-windows-7-despite-hardware-changes-minidumps-attached.1024348/
Relevancy 47.3%

Hey there,

Ive been having blue screens for quite a while now and been trying to fix them myself but Ive decided it might be easier with some assistance.

Ive ran memtest86+ for a whole day and found no errors.
I ran prime95 and furmark for a couple of hours with no errors.

Ive also tried using Driver Verifier a long while back and removed any drivers that i saw causing problems but it still persisted. I was going to try Driver Verifier again but while i do that i thought it'd be wise to see if anyone can see something obvious or offer some assistance.

My debug file is attached.
[Removed]

Thanks.

A:Windows 10 BSOD's - Driver problem or Hardware failure?

Diagnostics Test

 HDD TEST

Run SeaTools to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use - Windows 7 Help Forums
Run following tests
Short Drive Self TestShort genericLong generic
If the short generic fails, no need for the long generic.

   Note
Do not run SeaTools on an SSD as the results will be invalid.

Run chkdsk
Disk Check - Windows 7 Help Forums

Run HDTune to
scan for errors, no quick scan but full scancheck the health,benchmark.
It may take some time, but please take the time you need to perform it properly.
Let me know what the results are
of the error scan,make a screenshot of the health of every hard drive and post the screenshots,post screenshots with the benchmark of the
transfer rate,access time,burst rate,cpu usage.

Code:
2: kd> k
Child-SP RetAddr Call Site
ffffd001`c90f6788 fffff800`e917ca67 nt!RtlSplay+0x90
ffffd001`c90f6790 fffff800`e90b5e56 NTFS!NtfsFullDeleteLcb+0x47
ffffd001`c90f67c0 fffff800`e917cd1c NTFS!NtfsTeardownFromLcb+0x146
ffffd001`c90f6860 fffff800`e90aca80 NTFS!NtfsTeardownStructures+0xdc
ffffd001`c90f68e0 fffff800`e9164b5b NTFS!NtfsDecrementCloseCounts+0xd0
ffffd001`c90f6920 fffff800`e91a0182 NTFS!NtfsCommonClose+0x40b
ffffd001`c90f69f0 fffff802`7c4616a9 NTFS!NtfsFspCloseInternal+0x1a6
ffffd001`c90f6b80 fffff802`7c4f35a5 nt!ExpWorkerThread+0xe9
ffffd001`c90f6c10 fffff802`7c557626 nt!PspSystemThreadStartup+0x41
ffffd001`c90f6c60 00000000`00000000 nt!KiStartSystemThread+0x16
1: kd> k
Child-SP RetAddr Call Site
ffffd000`211ccd38 fffff801`bab74196 nt!KeBugCheckEx
ffffd000`211ccd40 fffff801`bab6b0c2 nt! ?? ::FNODOBFM::`string'+0x5396
ffffd000`211cd420 fffff801`bab697a1 nt!KiExceptionDispatch+0xc2
ffffd000`211cd600 fffff801`9ee937d3 nt!KiPageFault+0x221
ffffd000`211cd790 fffff801`9ee9292a NTFS!NtfsCreateScb+0xc23
ffffd000`211cd870 fffff801`9ee8fa23 NTFS!NtfsBreakBatchOplock+0xaa
ffffd000`211cd8e0 fffff801`9ee8f058 NTFS!NtfsOpenExistingAttr+0x93
ffffd000`211cd9b0 fffff801`9ee73ed6 NTFS!NtfsOpenAttributeInExistingFile+0x138
ffffd000`211cdb70 fffff801`9ee7638d NTFS!NtfsOpenExistingPrefixFcb+0x416
ffffd000`211cdc60 fffff801`9ee770c5 NTFS!NtfsFindStartingNode+0x45d
ffffd000`211cdd20 fffff801`9ee75efd NTFS!NtfsCommonCreate+0x425
ffffd000`211cdf50 fffff801`bab63047 NTFS!NtfsCommonCreateCallout+0x1d
ffffd000`211cdf80 fffff801`bab6300d nt!KxSwitchKernelStackCallout+0x27
ffffd000`eb9aaf30 fffff801`baa2fa61 nt!KiSwitchKernelStackContinue
ffffd000`eb9aaf50 fffff801`baa2f7d6 nt!KiExpandKernelStackAndCalloutOnStackSegment+0x131
ffffd000`eb9aafd0 fffff801`baa2f69f nt!KiExpandKernelStackAndCalloutSwitchStack+0xa6
ffffd000`eb9ab030 fffff801`9ee7a949 nt!KeExpandKernelStackAndCalloutInternal+0x2f
ffffd000`eb9ab080 fffff801`9d587895 NTFS!NtfsFsdCreate+0x1d9
ffffd000`eb9ab2a0 fffff801`9d5b62d7 FLTMGR!FltpLegacyProcessingAfterPreCallbacksCompleted+0x1a5
ffffd000`eb9ab330 fffff801`bae33d68 FLTMGR!FltpCreate+0x347
ffffd000`eb9ab3e0 fffff801`bae2a6d6 nt!IopParseDevice+0x7c8
ffffd000`eb9ab5b0 fffff801`bae290dc nt!ObpLookupObjectName+0x776
ffffd000`eb9ab750 fffff801`bae16580 nt!ObOpenObjectByNameEx+0x1ec
ffffd000`eb9ab870 00000000`00000000 nt!NtQueryAttributesFile+0x180
1: kd> k
Child-SP RetAddr Call Site
ffffd000`22cf2108 fffff800`eb166196 nt!KeBugCheckEx
ffffd000`22cf2110 fffff800`eb15d0c2 nt! ?? ::FNODOBFM::`string'+0x5396
ffffd000`22cf27f0 fffff800`eb15b57d nt!KiExceptionDispatch+0xc2
ffffd000`22cf29d0 fffff800`2d28319a nt!KiGeneralProtectionFault+0xfd
ffffd000`22cf2b60 fffff800`2d286432 NTFS!NtfsFindPrefix+0xea
ffffd000`22cf2c60 fffff800`2d2870c5 NTFS!NtfsFindStartingNode+0x502
ffffd000`22cf2d20 fffff800`2d285efd NTFS!NtfsCommonCreate+0x425
ffffd000`22cf2f50 fffff800`eb155047 NTFS!NtfsCommonCreateCallout+0x1d
ffffd000`22cf2f80 fffff800`eb15500d nt!KxSwitchKernelStackCallout+0x27
ffffd000`23932f30 fffff800`eb021a61 nt!KiSwitchKernelStackContinue
ffffd000`23932f50 fffff800`eb0217d6 nt... Read more

http://www.tenforums.com/bsod-crashes-debugging/42890-windows-10-bsods-driver-problem-hardware-failure.html
Relevancy 47.3%

I built a new system from scratch I hadn't done that since the 's but I'm capable and everything went together just fine i Processor Gigabyte Motherboard gb ram Raedeon vid card the one piece of hardware I already have But I've had nothing but trouble over the last months since I put it together I get constant and RANDOM BSODs Some have occurred during games others web browsing others while I'm afk I just come back to the user select screen and a new mini-dump I have Replaced the RAM sent the motherboard back to Gigabyte and gotten a replacement installed on my SSHD current but also used my TB drive just to test if it was the SSHD--no fix there I've taken out my video card and ran on the onboard--no fix I uninstalled and reinstalled windows in Hardware... Suspect BSOD Randomly Windows Occurring 7, three times The latest with a different fresh copy--and so far the errors seem to have become MORE frequent I am currently running fully updated Windows bit Professional and I'm going to cut this short so I don't get a BSOD that makes me lose all this I NEED help direction sympathy etc Any direction on potential fixes and helping me narrow down the culprit hardware or software is greatly appreciated

A:BSOD Occurring Randomly in Windows 7, Suspect Hardware...

MSINFO32:
Please go to Start and type in "msinfo32.exe" (without the quotes) and press Enter
Save the report as an .nfo file, then zip up the .nfo file and upload/attach the .zip file with your next post.
Also, save a copy as a .txt file and include it also (it's much more difficult to read, but we have greater success in getting the info from it).

systeminfo:
Please open an elevated (Run as administrator) Command Prompt and type (or copy/paste) "systeminfo.exe >%USERPROFILE%\Desktop\systeminfo.txt" (without the quotes) and press Enter. Then navigate to Desktop to retrieve the syteminfo.txt file. If you have difficulties with making this work, please post back. Then zip up the .txt file and upload/attach the .zip file with your next post.

http://www.sevenforums.com/bsod-help-support/302147-bsod-occurring-randomly-windows-7-suspect-hardware.html
Relevancy 47.3%

This is my third time trying to post this lost it from it auto-logging me out So if I BSOD Boot 0x000007B on Hardware New Windows 7 error seem abrupt and scattered sorry My problem is that when I boot up my system and Windows starts to load it gives me this BSOD This started happening after I added new parts will describe below I listed my old rig's parts in my profile but here's an overview My old rig is a HP Pavilion p w HP Support document - HP Support Center in a Apevia X-Sniper case with a nVidia GeForce GTX graphics card and a Corsair W PSU My new rig was the New Hardware BSOD on Windows 7 Boot error 0x000007B old rig except I replaced the mobo Ram and CPU to mobo ASRock Z Pro LGA New Hardware BSOD on Windows 7 Boot error 0x000007B Intel Z HDMI SATA Gb s USB ATX Intel Motherboard CPU Intel Core i - Ivy Bridge Dual-Core GHz LGA W BX I Desktop Processor Intel HD Graphics RAM Team Xtreme GB x GB -Pin DDR SDRAM DDR PC Desktop Memory Model TXD G HC QDC My Mobo just came back from RMA because it was DOA They just gave me a new one so I got to start it up and it was doing well until it got to booting Windows Two of the dots of the logo appear then it BSODs and restarts Nothing I've tried so far has helped I already tired all options in Startup Repair except restoring it to factory settings I have too many programs that I can not afford losing especially those it would be almost impossible to find again I've done a system Restore For some reason all of my restore points were gone except one that was dated to minutes New Hardware BSOD on Windows 7 Boot error 0x000007B after the first BSoD I've run a chkdsk to look for anything in the harddrive and I tried to start it in safe mode got the same error I tried removing all unncessisary hardware I E graphics card and all USB devices like keyboard and mouse and I tried running with stick of RAM then swapped to the other stick of RAM When I set up the harddrive the distance from where it would sit and where the SATA ports were was too long for the original SATA cable so I had to try the SATA cable I tried the SATA cable plugged into the SATA and SATA ports on the motherboard and I moved the harddrive onto the table next to the case so it could reach the ports using the shorter SATA cable and I tried it in both the SATA and SATA ports as well I did other things too but i can't even remember them at this point I post them when they come back to me Anyways when I looked up the error most of what I found suggested the HDD was damaged had a virus or had bad partitions I know for sure that is not the case because I am using it right now back in my old rig Which is where I am posting from This leads me to beleive it might be an issue with one of my new parts or more likely their drivers I can't test my mobo RAM or CPU without the other new parts because none of them are compatible with their old counterparts in my new rig Also I do not have access to a PC that is compatible with any of my new or old parts to test them on Sorry again if I was all over the place or if I missed something I'm extremely tired atm with this system and with typing this again I'm pretty sure I have everything hooked up correctly but if you want I can take pictures just in case Also I saw you have to include that file thingy in the attachments so obviously that was run on my OLD rig seeing as I can't get close enough in my new rig to run something like that Thanks in advance for your help

A:New Hardware BSOD on Windows 7 Boot error 0x000007B

You should try a clean reinstall after applying a changed motherboard.

http://www.sevenforums.com/bsod-help-support/370097-new-hardware-bsod-windows-7-boot-error-0x000007b.html
Relevancy 47.3%

Hi, I just updated all of my computers hardware.

Now I have:

ASUS M2a VA motherboard
AMD XP 64 5000+ processor
Nvidia Geforce 9800GTX
2gb ram

When I power on my computer, everything goes fine. It takes me to the screen where it says that Windows closed abnormally, bla bla bla, choose safe mode, last known good config, etc.

When I choose any of these, it blinks the Windows loading screen, and then blinks what appears to be a blue screen of death, then the computer restarts.

What's the problem? I have Windows XP Professional installed. I would REALLY not want to do a format and reinstall of everything if possible. Do I need Windows XP professional 64 or something?

A:BSOD after hardware update right after the Windows loading screen

It could be a hard drive issue. If it's looping then the hard drive could have failed or be failing. Find out the manufacturer of the hard drive and go to their web site and download the tests. Then create a boot able CD and boot off it and run the tests.

http://www.techsupportforum.com/forums/f10/bsod-after-hardware-update-right-after-the-windows-loading-screen-282021.html
Relevancy 46.87%

Hello I have been using Windows for about a couple months now maybe Anyways recently I have been encountering numerous BSoD messages to the point where I could hardly boot up I have HDs I boot off of C which is TB I have D and E as slave drives and both previously were issue? Windows 7 64bit Premium Constant BSoD; hardware boot drives with Windows XP Sp now they just are used to store files I actually yesterday re installed Windows on C however i have yet to delete Windows Old folder with my old boot files which were corrupted I have installed Avast on my new HD and also CCleaner I have also used DriverPackSolution to make sure all my drivers were up to date except my 'chipset' I think it might be my RAM because yesterday my monitor would not even Constant BSoD; hardware issue? Windows 7 Premium 64bit recieve a signal until I took out my sticks GB ram and put them back in Also last night it kept BSoD'ing before logging in constantly so I shut it off for the night this morning it booted up just fine but I know i'll get a BSoD after a while It seems to happen while I was playing games like WoW or such This is the latest BSoD http sixpop Constant BSoD; hardware issue? Windows 7 Premium 64bit com files bluescreen txt I already tried using the Windows repair and recovery system restore to no avail I do not think this is some virus wrecking havoc on me I am more convinced this is a hardware problem OS Windows x What was original installed OS on system Windows x Premium Is the OS an OEM version came pre-installed on system or full retail version YOU purchased it from retailer retail Age of system hardware - years Age of OS installation - have you re-installed the OS day yes CPU Video Card - NVedia GeForce GTX MotherBoard - ASRock K N M GHz Power Supply - Rosewill W i think OS Version Microsoft Windows Ultimate Service Pack bit Processor AMD Phenom tm II X Processor AMD Family Model Stepping Processor Count Constant BSoD; hardware issue? Windows 7 Premium 64bit RAM Mb Graphics Card NVIDIA GeForce GTX Mb Hard Drives C Total - MB Free - MB D Total - MB Free - MB E Total - MB Free - MB F Total - MB Free - MB Motherboard ASRock K N M Antivirus avast Antivirus Updated and Enabled Here are two minidump files http sixpop com files - - dmp amp http sixpop com files - - dmp I am not sure if my chipset supports windows It should i think I have yet to run a CHKDSK on this new HD and I tried running the memory diagnostic from Windows and it passed all marks If you need any more information please tell me Also I put the html file inside the zip of the attachment I am about to run the HDD and Mem diagnostics via USB

A:Constant BSoD; hardware issue? Windows 7 Premium 64bit

NOTE: I have severe eye problems. If I do not respond to your postings, please PM another staff member for assistance.

I suggest starting all troubleshooting with the following diagnostic tests (located at this link: Hardware Diagnostics ). They'll save you a lot of time and heartache if there is a hardware failure, and you'll have the disks on hand in case you need them in the future:

Quote:




H/W Diagnostics:
Please start by running these bootable hardware diagnostics:
Memory Diagnostics (read the details at the link)
Hard Drive Diagnostics (read the details at the link) - Test ALL of the hard drives.

Also, please run one of these free, independent online malware scans to ensure that your current protection hasn't been compromised: Free Online AntiMalware Resources (read the details at the link)
There are also free, bootable antivirus disks at this link: Free Online AntiMalware Resources - Bootable Disks




No Windows Updates since installing SP1. Please get all available Windows Updates (there's 60-70 available AFAIK).

Wireless USB network device: D-Link AirPlus G DWL-G510 Wireless PCI Adapter(rev.B)
Here's my rant about these devices:

Quote:




I do not recommend using wireless USB devices.
These wireless USB devices have many issues with Win7 - and using Vista drivers with them is almost sure to cause a BSOD.
An installable wireless PCI/PCIe card that's plugged into your motherboard is much more robust, reliable, and powerful.




DO NOT use this device if you cannot find Win7 drivers for it!!!

This looks very, very similar to another topic under another name in another forum (Windows Answers). I even posted links to the updated chipset drivers for you there.

http://www.techsupportforum.com/forums/f299/constant-bsod-hardware-issue-windows-7-premium-64bit-621626.html
Relevancy 46.87%

Hi guys First off I am sorry if this has been Windows failed recent BSOD hardware error. to start...A posted before I have seen it on Google with different suggestions that people said didn t Windows failed to start...A recent hardware error. BSOD work I don t have my computer to work on so I have to use my work computer to type this Last night I started my Toshiba Windows amp laptop and it went to the screen that says that Windows failed to start A recent hardware or software change might be the cause Options of Launch Startup Repair recommended vs Start Windows Normally are given I use the first option and it ends up with a black screen and a bigger than normal white arrow cursor that responds to the mouse and that s it I use the second option that shows the Windows logo loading up normally then right to the BSOD I went to safemode and turned off the auto restart To summarize the error message in the BSOD said Unmountable Boot Volume At the bottom it said STOP X ED xFFFFFA C CD XFFFFFFFFC then two xlots of s repeated twice I tried to go to a previous restore point with no luck I saw that there was a BSOD help section but didn t know how to use it since I can t get my laptop to start I would be grateful if someone knows where to direct me or any advice or if any additional information is needed Thanks Mikeinstlouis nbsp

A:Windows failed to start...A recent hardware error. BSOD

Give this link a read---> How To Fix Unmountable Boot Volume STOP: 0x000000ed Let us know how things go!
 

https://forums.techguy.org/threads/windows-failed-to-start-a-recent-hardware-error-bsod.1148910/
Relevancy 46.87%

Hi guys First off I am sorry if this has been posted before I have seen it on Google with different suggestions that people said didn't work I don't have my computer to work on so I have to use my work computer to type this Last night I started my Toshiba Windows amp laptop and it went to the screen that says that Windows failed to start A recent hardware or software change might be the cause Options of Launch Startup Repair recommended vs Start Windows Normally are given I use the first option and it ends up with a black screen and a bigger than normal white arrow cursor that responds to the mouse and that's it I use the second option that shows the Windows logo loading up normally then right to the BSOD I went to safemode and turned off the auto restart To summarize the error message in the BSOD said Unmountable Boot Volume At the bottom it said STOP X ED xFFFFFA C CD XFFFFFFFFC then two xlots of 's repeated twice I tried to go to a previous restore point with no luck I saw that there was a Failed start..A recent hardware.....error. BSOD Windows to BSOD help section but didn't know how to use Windows Failed to start..A recent hardware.....error. BSOD it since I can't get my laptop to start I would be grateful if someone knows where to direct me or any advice or if any additional information is needed Thanks MikeinstlouisEdit Topic moved from Windows to the more appropriate forum Animal

A:Windows Failed to start..A recent hardware.....error. BSOD

Boot into Safe Mode with Command Prompt.
 
Open the Command Prompt and type in bootrec /fixboot.  Please notice the space between the bootrec and the /fixboot.  Now press Enter.
 
Reboot to see if this resolves the issue.

http://www.bleepingcomputer.com/forums/t/577498/windows-failed-to-starta-recent-hardwareerror-bsod/
Relevancy 46.87%

Hello I have been using Windows hardware 7 Constant Windows BSoD; Premium issue? 64bit for about a couple months now maybe Anyways recently I have Constant BSoD; hardware issue? Windows 7 Premium 64bit been encountering numerous Constant BSoD; hardware issue? Windows 7 Premium 64bit BSoD messages to the point where I could hardly boot up I have HDs I boot off of C which is TB I have D and E as slave drives and both previously were boot drives with Windows XP Sp now they just are used to store files I actually yesterday re installed Windows on C however i have yet to delete Windows Old folder with my old boot files which were corrupted I have installed Avast on my new HD and also CCleaner I have also used DriverPackSolution to make sure Constant BSoD; hardware issue? Windows 7 Premium 64bit all my drivers were up to date except my chipset I think it might be my RAM because yesterday my monitor would not even recieve a signal until I took out my sticks GB ram and put them back in Also last night it kept BSoD ing before logging in constantly so I shut it off for the night this morning it booted up just fine but I know i ll get a BSoD after a while It seems to happen while I was playing games like WoW or such This is the latest BSoD http sixpop com files bluescreen txt I already tried using the Windows repair and recovery system restore to no avail I do not think this is some virus wrecking havoc on me I am more convinced this is a hardware problem My current set-up Tech Support Guy System Info Utility version OS Version Microsoft Windows Ultimate Service Pack bit Processor AMD Phenom tm II X Processor AMD Family Model Stepping Processor Count RAM Mb Graphics Card NVIDIA GeForce GTX Mb Hard Drives C Total - MB Free - MB D Total - MB Free - MB E Total - MB Free - MB F Total - MB Free - MB Motherboard ASRock K N M Antivirus avast Antivirus Updated and EnabledClick to expand Here are two minidump files http sixpop com files - - dmp amp http sixpop com files - - dmp I am not sure if my chipset supports windows It should i think I have yet to run a CHKDSK on this new HD and I tried running the memory diagnostic from Windows and it passed all marks If you need any more information please tell me nbsp

Relevancy 46.44%

Hello restarts or install. wont windows complete install 7 bsod everyone first off thanks for taking the time to consider my problem i know this is quite a redundant issue thank you for your patience First off this windows 7 wont complete install. restarts install or bsod is a newly built computer all windows 7 wont complete install. restarts install or bsod fresh components after cleaning activating the windows 7 wont complete install. restarts install or bsod hdd via shift f at win setup which took me a day to figure out i was very excited to see my hdd available for win installation as i proceed windows does its thing after installing its time for the first restart it restarts right back to the initial windows setup ive done a lot of research and majority of the problems seem to be the boot priority in bios so i made sure that it was usb-hdd then hard drive win on flash drive for me no dvd burner available still the same thing right back to initial setup i tried maybe to remove the flash drive during the second countdown to restart but when it restarts the windows splash screen comes up and then blue screens and restarts real quick cant see what the error is on bsod there have been a couple different start up issues quot windows did not start properly quot quot select version of windows to start from quot or something to that effect but its all the same outcome windows just wont finish installation i know this flash drive works cuz i used it to upgrade on my gf's laptop any suggestions would be greatly appreciated thanks

A:windows 7 wont complete install. restarts install or bsod

Did you wipe the HD with Diskpart Clean Command?

Check for newer BIOS version. If none, Reset BIOS to defaults, set SATA controller to AHCI.

Set HD first to boot in BIOS setup, trigger stick to boot using one-time BIOS boot menu key at boot.

Where did you get Win7? How is it written to stick?

http://www.sevenforums.com/installation-setup/251623-windows-7-wont-complete-install-restarts-install-bsod.html
Relevancy 46.01%

Hi I have just trying install driver when / BSOD / windows to install update s/w run built a Windows machine and am having lots of problems I can't run windows update which outputs error messages BSOD when trying to run windows update / install driver / install s/w - have followed all the fixes for this to no success I get BSOD constantly whenever I try to do anything The system is all new apart from the GPX card full spec below AMD Bulldozer FX- Quad Core Asus M A x motherboard GB x Kingston HyperX Genesis Grey DDR Sapphire Radeon HD GB PCIe moved over from old PC x OCZ Vertex II Bigfoot GB SSD OS and program drive x Seagate Barracuda TB HDD file storage only Rane TTM SL USB soundcard W BeQuiet PSU The system is a fresh build yesterday with NOTHING installed on any of the drives apart from Motherboard drivers Windows OS - x Ultimate SP Windows updates up to a point - of them can't install Serato Scratch Live software and drivers for the TTM SL AVG Antivirus Free BSOD when trying to run windows update / install driver / install s/w I have attached a zip of dump file and report Any help would be massively appreciated

A:BSOD when trying to run windows update / install driver / install s/w

Two problems

One, your AVG.
I notice your AVG which is often at least a contributing cause of BSOD'S . Please remove and replace your AVG with Microsoft Security Essentials AT LEAST TO TEST

Download tools and utilities | AVG Worldwide

Microsoft Security Essentials - Free Antivirus for Windows
Second BCC 101

Best advice that I've seen about this error (from here: http://www.sevenforums.com/crashes-d...tml#post356791 )





Quote:
What you're looking for will be in one of the following categories:

a) BIOS bug
b) a driver whose activity is causing the target processor to lock up
c) a hardware defect (temperature, voltage, dust, RFI, outright borkedness...)


Check the drivers
Check the inside of the case (temperature, voltage, dust, etc).
Run Furmark, and Prime95 below.





Quote:
Try this free video stress test: FurMark: VGA Stress Test, Graphics Card and GPU Stability Test, Burn-in Test, OpenGL Benchmark and GPU Temperature | oZone3D.Net
Try this free stress test: Free Software - GIMPS







Quote:
Prime95 Setup:
- extract the contents of the zip file to a location of your choice
- double click on the executable file
- select "Just stress testing"
- select the "Blend" test. If you've already run MemTest overnight you may want to run the "Small FFTs" test instead.
- "Number of torture test threads to run" should equal the number of CPU's times 2 (if you're using hyperthreading).
The easiest way to figure this out is to go to Task Manager...Performance tab - and see the number of boxes under CPU Usage History
Then run the test for 6 to 24 hours - or until you get errors (whichever comes first).
The Test selection box and the stress.txt file describes what components that the program stresses.

http://www.sevenforums.com/bsod-help-support/202947-bsod-when-trying-run-windows-update-install-driver-install-s-w.html
Relevancy 45.15%

Hi I use a year old aces aspire z and I think it just died on me Here is what happens Whatever I do it cannot stay without a BSOD for more than minutes I tried reinstalling drivers and it did not change anything so I tried several things but finally just formated it and installed windows again I actually got a BSOD while installing windows from an original CD so im pretty sure my problem is hardware related I did a check of the ram with Memtest for approx minutes one full cycle and found nothing I did a quick test of the HD with an other program and it did not find anything either so im starting to think its the graphics card that is dying The minidumps there quite a lot of them but I think they will always give the same Clean - Still BSOD install lots of windows - BSOD Format, same info and health report are attached to the thread Here are some specs Core Duo T Mobile Intel GM Express x MB Thanks in advance for helping me confirm the source of lots of BSOD - Format, Clean windows install - Still same BSOD this problem

A:lots of BSOD - Format, Clean windows install - Still same BSOD

Any help would be greatly appreciated, I really dont know what to do!

http://www.sevenforums.com/bsod-help-support/206684-lots-bsod-format-clean-windows-install-still-same-bsod.html
Relevancy 44.72%

Hello all- My friend has an old laptop laying around that was broken so I told him hey what the heck bring it over and I'll fool around with it He brings it over and I get my good old external HD that I use YUMI to install windows with This thing is going nuts beeps amp boops the on Install Fails this Home 7 (Can install Pre not hardware) Win whole time I figured out the built Win 7 Install Fails Home Pre (Can not install on this hardware) in keyboard is fried due to liquid damage at some point I yank it out I connect my dell wired keyboard that I use for all my quot projects quot and start again I wipe the laptops HD and start my install It completes the install portion that is booted from my external then restarts into in windows to finish the install on its own HD Makes it all the way to the end where the screen flickers like its adjust the resolution Moments after that quot Windows could not be installed on this computers hardware- please restart quot I check everywhere online and I find a tutorial on this site that explains how to enter device manager in safe mode while installing win which I didn't bookmark like a fool I find that it has a LIST of drivers not recognized graphic card is one I down loaded the drivers from Acers website but while restarting the Win install I click i the load with drivers button and it says they aren't in driver format I'm lost- about the call this laptop broke done cooked I pulled the laptop HD out and ran disk check from my Dell desktop it was fine The liquid damage doesn't appear to have damaged the internals of the laptop the dvd drive is right under where I found the damage to the keyboard I tried a bit at first then tried bit neither makes a difference I wish I knew more about this thing- They made them with Intel amp AMD Acer Aspire gigs ram gig HD Win Home Pr

A:Win 7 Install Fails Home Pre (Can not install on this hardware)

Try the steps to Troubleshoot Windows 7 Installation Failures - Windows 7 Help Forums.

Install only the wireless or ethernet drive when you get online to pull in all other drivers from Windows Updates, after enabling Automatically deliver drivers via Windows Update (Step 3)

http://www.sevenforums.com/installation-setup/357981-win-7-install-fails-home-pre-can-not-install-hardware.html
Relevancy 44.72%

I'm at a loss as to how to get rid of install wizard message, "Found New Hardware - Windows needs to install driver softwarefor Universal Serial Bus (USB) Controller". Remains on desktop.  My printer is USB attached and working fine.  I've been into the Device Manager and tried seemingly everything possible...with NO success.  Desperate for help...thanks!

A:Message,"Found New Hardware-Windows needs to install driver software for USB Co"

You are using Vista? How long has the problem beenwith you?What printer do you have? Some all-in-one printers require install of up to three devices to be complete.

http://www.computerhope.com/forum/index.php/topic,149897.0.html
Relevancy 44.29%

I just put Install - "Detecting Windows [resolved] reboots at hardware XP configuration" Computer your together a new computer PCCHIPS M AG Motherboard AthlonXP MB PC RAM I'm sure this works - although it may still be incompatible with the system W PSU Samsung [resolved] Computer reboots at "Detecting your hardware configuration" - Windows XP Install GB HDD Sony DVD CDRW Burner LiteOn Wireless Keyboard and Mouse Integrated Graphics [resolved] Computer reboots at "Detecting your hardware configuration" - Windows XP Install After fiddling around with the motherboard and finding out that the motherboard shipped with the clear CMOS jumper in the 'ON' position Wouldn't boot what fun that was I finally managed to get it to boot Lo and behold when I attempted to install Windows XP two things happened With my SP Integrated install disc the installation got as far as the initial blue screen where it loads up device drivers Then it displayed an error quot ntkrnlmp exe cannot be found quot or something of the sort I rebooted and then tried holding down F at this point The computer then restarted abruptly for no apparent reason When I tried my SP disc it simply restarted right after the 'Windows is inspecting your hardware' message before the installer even starts It just kept going around in a loop I tried various configurations of ACPI power management in the BIOS I tried using the 'optimized defaults' toggle Nothing helps The windows install simply refuses to work Any ideas By the way hello everyone I'm a new user

A:[resolved] Computer reboots at "Detecting your hardware configuration" - Windows XP Install

Try running this program from a bootable floppy or cd. For best results, run over night.
http://www.memtest86.com/

http://www.techsupportforum.com/forums/f10/resolved-computer-reboots-at-detecting-your-hardware-configuration-windows-xp-install-62139.html
Relevancy 44.29%

Hello everyone I m rather new to fiddling with hardware and software I ve done a bit of reading and managed to put together a working system and am leaving my old laptop at home with my dad XP Pro freezes at "Inspecting Windows install Hardware" About a year and a half ago he converted the laptop to a dual-boot Linux Windows XP Pro system with a GRUB boot loader Everything worked fine until today when we decided to flatten the laptop so that it can be re-used by my family Laptop Specifications Dell Inspiron purchased May Ghz Processor Mb RAM GB Hard drive ATI Radeon Mobility CD-R RW DVD drive don t know what speed Used to run Windows XP Pro Knoppix We started this morning trying to boot up from the Windows XP Pro install disc that came with the system The first disc we tried wasn t recognized by the system so we tried an extra Windows XP Pro disc the first disc was recognized in other machines Upon bootup the install proceeded to Windows XP Pro install freezes at "Inspecting Hardware" quot Inspecting system Windows XP Pro install freezes at "Inspecting Hardware" hardware quot and then stopped at a black screen indefinitely A little research showed that this is apparently a known problem in systems with complex partitions or Linux bootloaders We followed some advice found from that search and tried a Knoppix Boot-from-CD Windows XP Pro install freezes at "Inspecting Hardware" but it wasn t recognized either Another Linux Boot-from-CD was tried and it was recognized but we were unable to reformat with that disc We booted into a third Knoppix Boot-from-CD and used QPartition or whatever it s called I ve never really -used- the Linux part to delete everything except the GRUB bootloader--this couldn t be deleted We have since been trying to boot from CD s but nothing seems to work The Windows XP Pro boot discs freeze at quot Inspecting Hardware quot and Linux discs aren t recognized We also tried a Windows disc but again it was not recognized and froze after quot booting quot from the disc I have made both Ultimate Boot CD and Ultimate Boot CD for Windows and the discs have been checked on other systems but it isn t recognized as a bootable disc by the laptop At this point I m wondering if something is wrong with my CD drive I know that it had to be replaced twice by Dell but this third drive hasn t had any problems up til now I m looking into making an Ultimate Boot CD that is bootable from my USB drive but still not having much luck having troubles getting the USB formatted at the moment Any insight on this problem would be appreciated I really hate to have a -lb paperweight Thanks Asteri nbsp

A:Windows XP Pro install freezes at "Inspecting Hardware"

Does the laptop have a floppy drive?
If so you could boot from a win98 boot floppy run FDISK and delete the partitions, including the non-DOS ones like NTFS and Linux ones.
Then try the XP CD again
 

https://forums.techguy.org/threads/windows-xp-pro-install-freezes-at-inspecting-hardware.590467/
Relevancy 43%

I'm gettin' for Christmas either a DVD write/re-write drive, or some ramsticks; possibly both.

I'm cleanin' house too (re-format HD), and am wonderin' if it's best done before new hardware addition, or after new hardware addition...
 

A:re-install OS pre, or post new hardware install?

Probably before, but is should not matter much either way
 

https://forums.techguy.org/threads/re-install-os-pre-or-post-new-hardware-install.528404/
Relevancy 42.57%

I just signed up and added my playing hardware) error BSOD (no Machine_Check_Exception BF4 new BSOD system specs but i just remembered BSOD playing BF4 (no new hardware) error Machine_Check_Exception BSOD that i left out a lil info for the CPU- its o c stable at and has been absolutely stable for nearly years now with that out of the way I hope you guys can help and that my registration time spent will be worth it and that I can help out in other areas as BSOD troubleshooting is not a skill of mine I had a Gigabyte r x vid card that would constantly crash my computer could not get through a round of bf I took it back and got an ASUS version of the same chipset and it seemed to solve most of the crashes I can play for a couple hours but it will still crash eventually and its not the same type of crash i used to get either this type eventually goes to a blue screen instead of indefinitely frozen and forced to hard reset Im uploading the system dump i hope i did it right if not just let me know so i can re upload it thanks a million if you can help me out

A:BSOD playing BF4 (no new hardware) error Machine_Check_Exception BSOD

figure out the UNSOLVED this thread marking option.

http://www.sevenforums.com/bsod-help-support/314881-bsod-playing-bf4-no-new-hardware-error-machine_check_exception-bsod.html
Relevancy 42.14%

I built up a new PC before Christmas. These were the components:

Asus P8Z77-V Motherboard
Intel i5 3570K 3.4GHz
2 x G-Skill 8GB DDR3 1600Mhz
PowerColor HD 6870 1GB GDDR5 Dual DVI HDMI PCI-E Graphics Card
OCZ 120GB Agility 3 SSD

Not really used it that much and have had random crashes since built. Today, I decided to start afresh and reformatted the C drive and re-installed Windows. Although the OS installed without a hitch, at various times throughout the Windows Update process, the machine would crash a BSOD would appear.

I have attached the files as requested.

Can anyone advise me on what is the best approach to resolving this issue?

Cheers

Darren

A:Windows 7 - Fresh Install BSOD whilst applying windows updates

Hello DarrenF.

Four crashes, four different stopcodes.

Code:
BugCheck 34, {50853, fffff8800317e738, fffff8800317df90, fffff80002cd1eee}

Probably caused by : ntkrnlmp.exe ( nt!ExAcquireResourceSharedLite+4e )

Followup: MachineOwner
---------
BugCheck 1E, {ffffffffc0000005, fffff80002c8e284, 0, ffffffffffffffff}

Probably caused by : ntkrnlmp.exe ( nt!SwapContext_PatchXRstor+0 )

Followup: MachineOwner
---------
BugCheck 1A, {31, fffffa800ef4fac0, fffff8800e0ed000, fffff8a00a7584e0}

Probably caused by : ntkrnlmp.exe ( nt! ?? ::NNGAKEGL::`string'+7271 )

Followup: MachineOwner
---------
BugCheck 3B, {c0000005, fffff960000f6b32, fffff8800785ffa0, 0}

Probably caused by : win32k.sys ( win32k!FreeObject+12 )

Followup: MachineOwner
---------
Whereas ntkrnlmp.exe and win32k.sys, none of them cannot be the real probable cause of a crash. Do these tests, one by one.

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

Stress test the CPU.
Hardware - Stress Test With Prime95

Enable Driver Verifier to monitor the drivers.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

Let us know the results, with the subsequent crash dumps, if any.

http://www.sevenforums.com/bsod-help-support/273552-windows-7-fresh-install-bsod-whilst-applying-windows-updates.html
Relevancy 42.14%

Ok so a few days ago I was on my computer and it started running a little slow so I decided to restart This is when all the trouble began Following the reboot at the welcome screen i was greeted by several registry errors and a message saying a backup copy of wont xp to it tried but Windows install BSOD. windows, correctly!? had reinstall my registry had to be loaded So I thought ok why did this happen So I rebooted again to make sure every thing was still in check After the second reboot not sure if I can call it Windows xp had BSOD. tried to reinstall windows, but it wont install correctly!? that i didn't even get the welcome screen Instead i got a quick flash of a BSOD stop error and that was it So after overall reboots I figured my computer had crashed and decided to do a clean install I got my original cd free of scratches and formatted the hard drive completely Then when setup began to copy the files about different files could not be copied I tried to install windows AT-LEAST times I only got past the welcome screen twice and windows was completely crippled even though it did manage to load I tried reformatting repairing the install created a new partition and tried to install and all have failed The thing i find strange is that almost each time it would copy files some of the files would change So I am at a loss and don't know what to do or try next any help I have a gb hd ram pentium Msi computer with an Aopen motherboard

A:Windows xp had BSOD. tried to reinstall windows, but it wont install correctly!?

Pity you reformatted, sometimes that BSOD stop code gives a little insight to a problem. Could have referenced to a hardware fault and somewhat ruled out a few possibilities.
I've also had this problem with files not transfering and I just bought another CD and it worked. It happens with Server 2003 too. The CD just suddenly stops working and thats it.
You could try cleaning your CD\DVD drives laser, but thats a bit of long shot really. (didn't help in my case)

http://www.techsupportforum.com/forums/f10/windows-xp-had-bsod-tried-to-reinstall-windows-but-it-wont-install-correctly-291784.html
Relevancy 41.71%

i try to install windows xp on the computer listed below, i have windows 7 installed on a terabyte SATA3 drive, i create a new partition for windows xp of 200 gigs on that drive, but whenever i select that partition it freezes in the middle of installing the drivers, it's a windows xp cd from way back. so i figured it might have been new hardware so i grabbed an old sata 1 and removed the sata 3 from the picture by disconnecting it. then i was able to get it working, but it's so slow, and i beleive that hard drive is going out because of it's age it is clicking a lot and it is very loud whenever accessing. any suggestions of any questions please help. thanks so much.
 

Relevancy 41.71%

Trying to get my system up and running after replacing a dead Harddrive
Getting the message

Intel Pro Wireless 2200BG NEtwork connection #4

An error occurred while trying to install this device

The name is already in use as either a service name or a service display name
I've tried uninstalling the hardware from the device manager and rebooting. Windows will find it, it renames it with a new # (e.g. I've tried 4 times now, hence the #4 after the name).
CAn't seem to figure this one out.

Any thoughts?


BTW ...Dell Latitude C610 running winXP

Thanks in advance
 

A:Cannot install this hardware

With a little diligence, I found the answer.
See this article:

Network adapter install problems

A slight change from the recommended, the card tried to install once I rebooted so I did the regedit part First , THEN I deleted the network adapters in the device manager.

In the registry editor, the key related to THIS card is W22n50 which I deleted.

On the next boot everything installed correctly.
 

https://forums.techguy.org/threads/cannot-install-this-hardware.297969/
Relevancy 41.71%

When I try to connect/add a new device via fire wire or USB, I am told that I do not need a driver as my Windows XP supposedly already has the driver. I continue to get the message that the driver is not available.
The drivers for this device are not installed. (Code 28)

To reinstall the drivers for this device, click Reinstall Driver

I then click Reinstall and get this message
Cannot Install this Hardware
The hardware was not installed because the wizard cannot find the necessary software
Any suggestions?
 

Relevancy 41.71%

Asus M A GTD PRO Motherboard AMD Phenom II x b ghz CPU gb Ripjaw ram x gb New O/S Help. on SSD. Hardware, Install modules mhz WD Green Drive OCZ Vertex E gb SSD ATI Radeon New hardware that I installed recently the SSD and an extra gb ripjaw ram identical kits Error I am getting Reboot and select New Hardware, O/S Install on SSD. Help. proper boot device or insert boot media in selected boot device and press a key when I try to boot from Windows DVD The boot priority is as it should be I have taken out the WD HDD the gb New Hardware, O/S Install on SSD. Help. installed ram and all other hardware usb devices etc to see if they were causing any issues all long shots I ve reset the BIOS I ve replaced the DVD drive with a brand new one it s a SATA one by the way I have no clue really need help on this one been trying to solve it for the last hours My next move is to try and install Windows from a USB memory stick and update the BIOS with the latest version I haven t yet wiped the gb drive my previous O S drive and I can still boot windows on that I just can t seem to run the Windows install at all without getting that error message I ve also checked the IDE SATA RAID configs and everything is as it should be and I put the optical drive in SATA ports as that is where ASUS recommends them be I m at a loose end All I ve been trying to do is run Windows on the disk to install it on my new SSD nbsp

Relevancy 41.71%

בס''ד
Hi
Does anybody know if i get future problems by installing windows 7 home premium 64 bit on 32 bit computer hardware?
thankes for help
amir

A:Install 64 bit on 32 bit hardware

I would Check your PC with the Upgrade Advisor:

Download Details - Microsoft Download Center - Windows 7 Upgrade Advisor

With only 2gb of ram, I would stay with 32 bit.

http://www.sevenforums.com/installation-setup/197009-install-64-bit-32-bit-hardware.html
Relevancy 41.71%

I started up my computer up a week ago and when i got on my profile it said i had new hardware to install. After a while of X-ing out of it i just hit continue to see what happenes. it said it was trying to install an infared device. After i closed that another one poped up and tried to install a WDP (i think that's what's it's called). Both didn't install it successfully, but everytime i start up the computer they both begin. How can i get rid of these screens? I didn't install any new device either.

thnx

A:Saying i have new hardware to install, but i don't

but i never put any new hardware in. I got my computer fixed from this one guy and he didn't put any thing in it at all. How can i get rid of these messages or at elast make them stop!?!?

http://www.techsupportforum.com/forums/f10/saying-i-have-new-hardware-to-install-but-i-dont-147001.html
Relevancy 41.71%

guys help me, some programs are blocking installation of any hardware to my pc. how can get rid of those programs? they are not located where they are supposed to be in.
 

A:can't install hardware

What are you trying to install and do you have anti-virus software installed on your PC?
 

https://forums.techguy.org/threads/cant-install-hardware.569560/
Relevancy 41.71%

i am trying to install a usb to ethernet adapter and get a windows "cannot find the driver" message. i have the cd w/ the driver and direct it to it but it wont access the driver.
thanx in advance for any help,
wally
 

https://forums.techguy.org/threads/cannot-install-this-hardware.624406/
Relevancy 41.71%

Windows 7 installation fails with bsod when it tries to load driver vsmraid.sys (and I assume mount the hard disk). The only Windows/minidump directory is from an existing xp build.

A:Windows 7 64 bit Install BSOD

  
Quote: Originally Posted by John440b


Windows 7 installation fails with bsod when it tries to load driver vsmraid.sys (and I assume mount the hard disk). The only Windows/minidump directory is from an existing xp build.


These two crashes were caused by hardware. It also doesnt help that you have drivers that go back to 2001. These need to be updated. If it were me I would do a clean install of win 7

Before we can even attempt to identify the hardware problem you are going to have to update the drivers

Ken

DRIVERS MORE THAN A YEAR OLD AND AS MUCH AS 9 YEARS OLD


Code:
RDPCDD.sys 0xb268d000 0xb268e080 0x00001080 0x3b7d82c0 8/17/2001 3:46:56 PM
Beep.SYS 0xb2691000 0xb2692080 0x00001080 0x3b7d82e5 8/17/2001 3:47:33 PM
Null.SYS 0xba7a9000 0xba7a9b80 0x00000b80 0x3b7d82eb 8/17/2001 3:47:39 PM
mouhid.sys 0xba57c000 0xba57ef80 0x00002f80 0x3b7d82fd 8/17/2001 3:47:57 PM
BOOTVID.dll 0xba4b8000 0xba4bb000 0x00003000 0x3b7d8345 8/17/2001 3:49:09 PM
kdcom.dll 0xba5a8000 0xba5a9b80 0x00001b80 0x3b7d8346 8/17/2001 3:49:10 PM
Fs_Rec.SYS 0xb2693000 0xb2694f00 0x00001f00 0x3b7d8361 8/17/2001 3:49:37 PM
ParVdm.SYS 0xb2685000 0xb2686a80 0x00001a80 0x3b7d836d 8/17/2001 3:49:49 PM
ptilink.sys 0xba3e0000 0xba3e4580 0x00004580 0x3b7d8371 8/17/2001 3:49:53 PM
ftdisk.sys 0xb9f49000 0xb9f67880 0x0001e880 0x3b7d8419 8/17/2001 3:52:41 PM
dxgthk.sys 0xba690000 0xba690d00 0x00000d00 0x3b7d8438 8/17/2001 3:53:12 PM
Dxapi.sys 0xb35b7000 0xb35b9900 0x00002900 0x3b7d843f 8/17/2001 3:53:19 PM
raspti.sys 0xba3e8000 0xba3ec080 0x00004080 0x3b7d84c4 8/17/2001 3:55:32 PM
rasacd.sys 0xb115d000 0xb115f280 0x00002280 0x3b7d84cb 8/17/2001 3:55:39 PM
mnmdd.SYS 0xb268f000 0xb2690080 0x00001080 0x3b7d8538 8/17/2001 3:57:28 PM
dmload.sys 0xba5ac000 0xba5ad700 0x00001700 0x3b7d8567 8/17/2001 3:58:15 PM
audstub.sys 0xba73e000 0xba73ec00 0x00000c00 0x3b7d85bc 8/17/2001 3:59:40 PM
USBD.SYS 0xba62e000 0xba62f280 0x00001280 0x3b7d8682 8/17/2001 4:02:58 PM
WMILIB.SYS 0xba5aa000 0xba5ab100 0x00001100 0x3b7d878b 8/17/2001 4:07:23 PM
HDAudBus.sys 0xb89ef000 0xb8a17000 0x00028000 0x4295ef55 5/26/2005 10:46:29 AM
WDFLDR.SYS 0xb4b29000 0xb4b36000 0x0000d000 0x4549b22d 11/2/2006 3:54:05 AM
Wdf01000.sys 0xb0606000 0xb0681000 0x0007b000 0x4549b23a 11/2/2006 3:54:18 AM
vhidmini.sys 0xb9c6f000 0xb9c72180 0x00003180 0x46f0e551 9/19/2007 4:01:05 AM
JmtFltr.sys 0xb4b39000 0xb4b44f00 0x0000bf00 0x46fb51b3 9/27/2007 1:46:11 AM
Rtenicxp.sys 0xb89d5000 0xb89eea80 0x00019a80 0x4745a688 11/22/2007 10:55:52 AM
gdrv.sys 0xafe7f000 0xafe813e0 0x000023e0 0x475e1e9d 12/11/2007 12:22:37 AM
Lycosa.sys 0xb9052000 0xb9055f00 0x00003f00 0x47912b83 1/18/2008 5:43:15 PM
viamraid.sys 0xb9de4000 0xb9e00a00 0x0001ca00 0x479586f0 1/22/2008 1:02:24 AM
btport.sys 0xba388000 ... Read more

http://www.sevenforums.com/bsod-help-support/69952-windows-7-64-bit-install-bsod.html
Relevancy 41.71%

hey guys i finally upgraded my com from gb sata hard disk to a TB WD caviar blue and upgraded my ram to gb x GB kingston MHZ x GB kingston MHZ So basiclly i want to make my TB hard disk my main slave so BSOD to install trying windows when x64 i have to install window plus currently now im using Windows ultimate x and as i know x doesnt support GB of Ram so i fixed everything up and put in my dvd to install windows Guess what windows setup start and BAM BCOD with error x E I read few thread about this error and it mention hardware BSOD when trying to install windows x64 problem Well i unplug by hardware and tried installing and i still get the same result So i tried removing my gb ram and tried again and TADA its works and fully installs without a nag when it was finally done i put back my gb and bam BCOS dead appear after windows splash screen and it keeps on restarting even in safe mode but when i remove x gb ram and run windows x on gb it work There's the problem I'm having hope u guys and gals can help me really BSOD when trying to install windows x64 want to use windows on gb oh and btw this is BSOD when trying to install windows x64 my system spec Operating System Windows Ultimate -bit trying to use x Asus P B mobo BIOS BIOS Date Ver Processor Intel R Core TM Duo CPU E GHz CPUs Memory MB RAM Available OS Memory MB RAM Nvidia Geforce GT Soundmax integrated HD audio TB WD caviar blue HDD Gb Seagate HDD

A:BSOD when trying to install windows x64

Looks like you have mis-matched ram speeds. Best to have all matched size, speed, & pair od ram

http://www.sevenforums.com/bsod-help-support/165829-bsod-when-trying-install-windows-x64.html
Relevancy 41.71%

Hi all,

I literally just re-installed Windows 7 on my machine. had not even gotten all the drivers downloaded yet and I got multiple blue screens. It was happening when I was downloading my nVidia Gt680 driver so I'm wondering if that is the issue...

Figured I would have the experts take a look.

Every time I try to install I get a BSOD

A:BSOD after new windows 7 install

Hi,

There are no crash dumps located in your output folder.

1. Start > type %systemroot% which should show the Windows folder, click on it. Once inside that folder, ensure there is a Minidump folder created. If not, CTRL-SHIFT-N to make a New Folder and name it Minidump.

2. Windows key + Pause key. This should bring up System. Click Advanced System Settings on the left > Advanced > Performance > Settings > Advanced > Ensure there's a check-mark for 'Automatically manage paging file size for all drives'.

3. Windows key + Pause key. This should bring up System. Click Advanced System Settings on the left > Advanced > Startup and Recovery > Settings > System Failure > ensure there is a check mark next to 'Write an event to the system log'.

Ensure Small Memory Dump is selected and ensure the path is %systemroot%\Minidump.

4. Double check that the WERS is ENABLED:

Start > Search > type services.msc > Under the name tab, find Windows Error Reporting Service > If the status of the service is not Started then right click it and select Start. Also ensure that under Startup Type it is set to Automatic rather than Manual. You can do this by right clicking it, selecting properties, and under General selecting startup type to 'Automatic', and then click Apply.

If you cannot get into normal mode to do any of this, please do this via Safe Mode.

Regards,

Patrick

http://www.techsupportforum.com/forums/f299/bsod-after-new-windows-7-install-909002.html
Relevancy 41.71%

Hello I am having some difficulties while trying to download Windows -bit Home Edition Currently I have Windows -bit Home Edition on while trying install 7 BSOD 64-bit Windows to my machine I loaded the Windows -bit CD into the DVD ROM and select the option to boot from CD Well initially I get the quot Windows is Loading Files quot screen and then after it loads the files it BSOD while trying to install Windows 7 64-bit goes to the quot Starting Windows quot screen for maybe seconds freezes and that's when I get the BSOD Error Message - A problem has been detected and Windows has been shut down to prevent damage to your computer If this is the first time you've seen this Stop error screen restart your computer If this screen appears again follow these steps Check to be sure you have adequate disk space If a driver is identified in the Stop message disable the driver or check with the manufacturer for driver updates Try changing video adapters Check with your hardware vendor for any BIOS updates Disable BIOS memory options such as caching or shadowing If you need to use safe mode to remove or disable components restart your computer press F to select Advanced Startup Options and then select Safe Mode Technical Information Stop x E xFFFFFFFFC XFFFFF F BE XFFFFF D XFFFFF F This is the error message I keep receiving I have read a few things online to try out and none of them worked Here is everything that I have done so far - I read online to try and remove third party drivers I uninstalled and literally removed from my computer my graphics card EVGA GeForce GTX I also uninstalled my drivers for my Razor keyboard I have removed almost every application off of my computer I'm not worried about backing up files - nothing important was on it and I was planning on reinstalling everything anyways So if there is just a way to scrub my whole hard drive let me know I updated my BIOS I ran a Windows Memory Test and I received no errors I read online that RAM could be causing this issue not sure if its true or not but I removed one of my sticks of ram Had GB in it removed a stick now I have GB I've spent quite a bit of time trying to figure this out and researching things online but no luck Hopefully someone out there has some good tips advice for me Is so please share Thanks Kyle

A:BSOD while trying to install Windows 7 64-bit

Win7 32 bits is runnig fine? If so, it's very unlinlike you have disk or memory errors. It's not a driver problem... it isn't installing yet!

Are you really booting from DVD???

http://www.sevenforums.com/bsod-help-support/306448-bsod-while-trying-install-windows-7-64-bit.html
Relevancy 41.71%

Hey I ve had this problem for awhile but I am trying to sell my computer now so it would be nice to get it to work After sticking in the windows XP cd and Xp even before install. BSOD Windows will copying the files from the disk to the HDD the computer restarts shows the windows boot screen and then gives the BSOD and this error Stop c a Fatal System Error The session manager initialization system process terminated unexpectedly with a status of xc c x x The system has shut down The current BSOD before Windows Xp will even install. hardware configuration is PC Partner AMD Mobo don t know BSOD before Windows Xp will even install. what model AMD venice x Corsair DDR Ram ATA gb hard drive I ve actually tried a few other OS s in hopes of it just being a windows thing but none of them work I ve looked at some of the solutions offered before I m planning on trying the quot uninstall updates quot method the XP copy I have is SP The other solutions don t apply Any help would be appreciated Thanks nbsp

A:BSOD before Windows Xp will even install.

You should always mention what "other solutions" you've ruled out.

If this is a clean install, you need to test the ram.

I would also verify that overheating is not causing a problem -- ensure the fan is working.
 

https://forums.techguy.org/threads/bsod-before-windows-xp-will-even-install.693967/
Relevancy 41.71%

I am getting a BSOD w/ this error message during the install of Windows XP pro on a gateway laptop model M675.

IRQL Not Less or Equal.

I havent seen this one before. I going to try to reinstall again to see exactly where during the install it hits this error.

Also after the BSOD the laptop will not start up. The power lights come on but it does not bring up the BIOS. It comes back on after about an hour. No lights for the HD, I removed and reset the memory and tried it only with one each of the 512 modules.
 

A:BSOD During Windows XP PRO Install

What says the first line of the BSOD?
 

https://forums.techguy.org/threads/bsod-during-windows-xp-pro-install.762062/
Relevancy 41.71%

Haven t posted on here in a while because fortunately I haven t had any issues in a while - but if someone can help me with this I won t have to go to midtown on a Sunday just so I can throw my computer out of a higher window than my apartment I m running Windows -bit A few weeks ago I was doing normal stuff - web browsing probably playing a game SC and all of a sudden my screen starts turning this strange green color then everything freezes Earlier on in the month I had been having problems with my video card overheating so I assumed it was GPU after install BSOD Windows new the same I took it out cleaned it up and reseated it fixed it the previous time Worked fine for a bit then Windows BSOD after new GPU install what had been a weird green turned into purple streaks Rebooted again same problem except then it progressed into giving me purple streaks during boot up Either way cleaning and reseating the card did nothing to fix the issue like it had the previous time - after Windows BSOD after new GPU install a few reboots I actually couldn t even get to the windows load screen and I figured it was time to replace the card so I did that It was an old GeForce Windows BSOD after new GPU install GT Replaced the card with a Radeon HD Windows boots up gets past the load screen Login goes fine Then Blue Screened I assumed it was drivers or lack of drivers as I had gone from an NVidia card to an AMD but after going through reboot after reboot and changing drivers and deleting drivers and uninstalling and reinstalling drivers I kept getting the same thing I could login to windows but after about - seconds I d get blue screened I thought maybe it was still a driver issue NVidia PhysX from my old card was still showing up in add remove programs even after I deleted it and I just got fed up so I exchanged it and got a GTX ti thinking maybe that would solve the driver problem It did not After installing the GTX ti I get the same blue screen after the same amount of time safe mode works fine The windows error recovery window claims it has something to do with my version Symantec Endpoint Protection not being compatible with my version of Windows I refused and still kind of refuse to believe that was the error as I ve had it for years and never had any issue until I installed a new video card and apparently you can t just uninstall SEP without making edits to your registry manually I also just think that can t actually be the problem just because I ve been running it without issue for so long on this machine although srtspl sys does have something to do with Symantec according to Google I just tried making a Windows repair CD and running it but it did nothing to fix the problem so I m out of ideas I thought I d post here before I resort to spending a year backing everything up and reformatting Problem Signature BlueScreen OS Version Additional Information about the problem BCCode e BCP FFFFFFFFC BCP FFFFF BCP FFFFF BCP FFFFF E OS Version Service Pack Product Thanks

Relevancy 41.71%

Dear all I've been having this problem for a while install on BSOD Windows 7 - new x64 now but I didn't know what to do Until recently I googled for some answers but the closest thing I can get is to locate the minidump files My system is is a Lenovo U laptop among one of the first few shipment releases almost years ago CPU Intel C D P Ghz Ram GB DDR x I borrowed from a friend thinking it could be the ram BSOD on new install - Windows 7 x64 issue but still running into BSOD Video ATI Mobility Radeon HD Mobile Intel Series I believe it's HD HD Samsung GB this one I borrow from my friend for testing if it's HD failure but still running into BSOD I did a fresh install of Windows x and installed all win driver available I can get from Lenovo support website I still get BSOD quite frequently I have attached the minidump files I located and hoping someone will be able to help me identify the possible root causes as I can no longer stand sudden crashed while working on something important Thank you in advance and I appreciate any support Sincerely Yours

A:BSOD on new install - Windows 7 x64

Hi,

The summary says it all


Code:

BugCheck 124, {0, fffffa8005c4c038, b2000000, 60151}
Probably caused by : hardware
??????????????????????????????????????????????????????????????????????????????????????``
BugCheck 124, {0, fffffa8005c65038, b2000000, 60151}
Probably caused by : hardware
??????????????????????????????????????????????????????????????????????????????????????``
BugCheck 124, {0, fffffa8005c34038, b2000000, 60151}
Probably caused by : hardware
??????????????????????????????????????????????????????????????????????????????????????``
BugCheck 124, {0, fffffa8005c5d038, b2000000, 60151}
Probably caused by : hardware
??????????????????????????????????????????????????????????????????????????????????????``
BugCheck 124, {0, fffffa800514a038, b2000000, 60151}
Probably caused by : hardware
??????????????????????????????????????????????????????????????????????????????????????``

So, run some hardware tests to try and figure out what part it is


Quote:




Memtest86+ - Instructions:

Download the ISO (or the .exe for USB drives) from here http://www.memtest.org/#downiso

Then (if you have chosen the ISO) burn the ISO using IsoRecorder: ISO Recorder v3 Download (How to use IsoRecorder)

Boot from the CD/USB and run the test (at least 7 passes per test) with only one stick of RAM in place at a time.

It is a time consuming process but it is the only way to be sure it isn't a RAM fault.

For your final test, run the test with all the RAM in place.




http://www.sevenforums.com/tutorials...t-prime95.html (run the Blend test as well as the Small FFT test)


Quote:




FurMark - Instructions:

Download from here: http://www.ozone3d.net/benchmarks/fur/
- If you have more than one GPU, select Multi-GPU during setup
- In the Run mode box, select "Stability Test" and "Log GPU Temperature"
Click "Go" to start the test
- Run the test until the GPU temperature maxes out - or until you start having problems (whichever comes first).
- Click "Quit" to exit




Regards,
Reventon

BUGCHECK SUMMARY

Code:

Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Thu Sep 30 16:58:12.447 2010 (GMT+13)
System Uptime: 1 days 1:54:15.414
Probably caused by : hardware
BUGCHECK_STR: 0x124_GenuineIntel
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: uTorrent.exe
Bugcheck code 00000124
Arguments 00000000`00000000 fffffa80`05c4c038 00000000`b2000000 00000000`00060151
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Tue Sep 28 15:22:29.035 2010 (GMT+13)
System Uptime: 0 days 1:09:30.001
Probably caused by : hardware
BUGCHECK_STR: 0x124_GenuineIntel
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
Bugcheck code 00000124
Arguments 00000000`00000000 fffffa80`05c65038 00000000`b2000000 00000000`00060151
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Mon Sep 27 22:21:42.198 2010 (GMT+13)
System Uptime: 0 days 2:08:27.164
Probably caused by : hardware
BUGCHECK_STR: 0x124_GenuineIntel
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: chrome.exe
Bugcheck code 00000124
Arguments 00000000`00000000 fffffa80`05c34038 00000000`b2000000 00000000`00060151
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Mon Sep 27 20:10:25.832 2010 (GMT+13)
System Uptime: 0 days 1:49:53.798
Probably caused by : hardware
BUGCHECK_STR: 0x124_GenuineIntel
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: chrome.exe
Bugcheck code 00000124
Arguments 00000000`00000000 fffffa80`05c5d038 00000000`b2000000 00000000`00060151... Read more

http://www.techsupportforum.com/forums/f299/bsod-on-new-install-windows-7-x64-518235.html
Relevancy 41.71%

Hello,

I am getting a pretty frequent BSOD on windows 7. The dmp files seem to point to ntfs.sys. Can anyone suggest what might be wrong and how I can fix this? dmp files attached below.

Thanks!
 

A:BSOD in Windows 7 new install

could be a missing storage driver or corrupted installation. you could try putting in your win7 OEM disk and try to recopy the file. 90% of BSODs are caused by drivers though so check to see if all of your drivers are installed using Device Manager. you may have to download some windows 7 beta drivers in order for some of the hardware to work properly. a lot of older hardware may be unsupported...
 

http://www.techspot.com/community/topics/bsod-in-windows-7-new-install.138757/
Relevancy 41.71%

I have a Gateway MX Laptop I received from my grandparents when they replaced it with a beastly Fujitsu Lifebook I have been trying for days now to install an OS on it with no success Every time it is in the part of the install XP On BSOD Windows Install where it's got about - minutes left it Blue screens something about pages in a non paged area Error messages all relate to memory problems It was BRAND NEW memory I took it back and exchanged it thinking I got faulty memory for the same type and again same problem Then I thought I got the wrong memory but according to Gway no I didn't it's right So then I thought maybe my CD was crap Tried THREE other ones they didn't work So I said quot screw windows quot and tried installing Ubuntu This time I got through attempts with freezing then a message about a timer not being connected to IO-APIC whatever that means So I got to thinking about the memory again and remembered it has some sort of on-board memory for the graphics card like or something and one expansion slot up to GB which i put in And is it possible the on-board BSOD On Windows XP Install memory is the one that's crapping out If so does that mean the laptop should now be slammed against a tree spat on then swept into a storm drain Any suggestions Please I've tried all I can think of aside from dismantling the laptop and messing with internal organs

A:BSOD On Windows XP Install

Quote:





Originally Posted by Eluria


If so does that mean the laptop should now be slammed against a tree, spat on, then swept into a storm drain?





I'm not too familiar with gateways, but I'll give it a go. I'd like you to post the actual error message, with the stop error, when you get the blue screen. By the way, isn't your user name from the Dark Towers series?

http://www.techsupportforum.com/forums/f10/bsod-on-windows-xp-install-355427.html
Relevancy 41.71%

I have a:

Toshiba Satelite P205-S7806

Windows Vista Home Premium
Intel Pentium Dual CPU T2330 @1.6GHz
RAM 2.00 GB
OS: 32 bit


Install starts just fine (from windows 7 disk). Upon first restart it loads to the Windows 7 startup screen. Next comes the BSOD! It contains the following errors:

STOP: 0x0000007B (0xF78D2524,0xC0000034,0x00000000,0x00000000)

This happens if I upgrade of try to install on a blank partition. Most Google searches tell me to change my SATA config in BIOS. Not sure if this is my problem or not, but I have no such settings in my BIOS. What step should I take next?

Note: This computer was running Windows 7 at one point before (about a year ago). Hard drive crashed while in Iraq. I sent it back home to a computer shop and they replace my hard drive (and gave me Vista! ). Aside from the hard drive, everything else is stock.

A:BSOD while trying to install Windows 7

No DMP files in upload please try this method.

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.


To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

http://www.sevenforums.com/bsod-help-support/203080-bsod-while-trying-install-windows-7-a.html
Relevancy 41.71%

I just installed a new copy of Windows 7 Ultimate x64, had no issues for a day or so but it seems to give me a BSOD at random.

I have attached files to assist with solving this problem.

Thanks for any help you can provide me!!

A:BSOD new windows install

  
Quote: Originally Posted by Scola


I just installed a new copy of Windows 7 Ultimate x64, had no issues for a day or so but it seems to give me a BSOD at random.

I have attached files to assist with solving this problem.

Thanks for any help you can provide me!!


Memory exception caused by yours video driver (atikmdag.sys). re-install as directed.

When upgrading your graphic driver you MUST remove all traces of the current driver. In order to do that we recommend using Guru3D - Driver Sweeper

When it is removed then download and install the fresh copy.
Ken J

http://www.sevenforums.com/bsod-help-support/140384-bsod-new-windows-install.html
Relevancy 41.71%

Hello,

I am getting a pretty frequent BSOD on windows 7. The dmp files seem to point to ntfs.sys. Can anyone suggest what might be wrong and how I can fix this? dmp files attached below.

Thanks!

A:BSOD in Windows 7 new install

STOP 0x24: NTFS.sys errors are usually fixed by:
- running CHKDSK /R from an elevated (Run as adminsitrator) Command Prompt
- or running a hard drive diagnostic: http://www.carrona.org/hddiag.html

More info on the error message here: http://www.carrona.org/bsodindx.html#0x00000024

The analysis of the dump files also points to issues with your McAfee software. I'd suggest uninstalling it, then using the McAfee Consumer Products Removal tool: http://service.mcafee.com/FAQDocument.aspx?id=TS100507

IMMEDIATELY install a free antivirus program to protect you while troubleshooting.

Update these drivers to ensure that they aren't causing issues:

Code:
aw_host5.sys Mon Feb 19 05:35:33 2007
awechomd.sys Mon Feb 19 05:35:10 2007
hcwPP2.sys Tue Feb 06 13:30:04 2007
Here's the memory dump analysis':

Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\FUBAR\TempDUMP\DATA\01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0xfffff800`02863000 PsLoadedModuleList = 0xfffff800`02aa0e50
Debug session time: Thu Nov 26 23:31:46.981 2009 (GMT-5)
System Uptime: 0 days 0:00:24.885
Loading Kernel Symbols
...............................................................
................................................................
....................
Loading User Symbols
Loading unloaded module list
....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 24, {1904fb, fffff88002f48818, fffff88002f48070, fffff800028dd0c4}

Probably caused by : Ntfs.sys ( Ntfs!NtfsAcquireExclusiveFcb+73 )

Followup: MachineOwner
---------

2: kd> !thread;!analyze -v;r;kv;lmtn;lmtsmn;.bugcheck;.logclose;q
GetPointerFromAddress: unable to read from fffff80002b0b000
THREAD fffffa8001923040 Cid 0004.0018 Teb: 0000000000000000 Win32Thread: 0000000000000000 RUNNING on processor 2
Not impersonating
GetUlongFromAddress: unable to read from fffff80002a49b74
Owning Process fffffa80018b4740 Image: System
Attached Process N/A Image: N/A
fffff78000000000: Unable to get shared data
Wait Start TickCount 1594
Context Switch Count 322
ReadMemory error: Cannot get nt!KeMaximumIncrement value.
UserTime 00:00:00.000
KernelTime 00:00:00.000
Win32 Start Address nt!ExpWorkerThread (0xfffff800028e2050)
Stack Init fffff88002f48db0 Current fffff88002f489f0
Base fffff88002f49000 Limit fffff88002f43000 Call 0
Priority 13 BasePriority 13 UnusualBoost 0 ForegroundBoost 0 IoPriority 2 PagePriority 5
Child-SP RetAddr : Args to Child : Call Site
fffff880`02f47828 fffff880`0126e3d8 : 00000000`00000024 00000000`001904fb fffff880`02f48818 fffff880`02f48070 : nt!KeBugCheckEx
fffff880`02f47830 fffff880`01342f80 : fffff880`0129efc8 fffff880`02f48be0 fffff880`02f48be0 fffff880`01342f6c : Ntfs! ?? ::FNODOBFM::`string'+0x2cc9
fffff880`02f47870 fffff800`029034dc : 00000000`00020000 fffffa80`00000000 fffff880`02f47cc0 fffff8a0`0102fa70 : Ntfs! ?? ::NNGAKEGL::`string'+0x7d3d
fffff880`02f478c0 fffff800`028fabed... Read more

http://www.techsupportforum.com/forums/f299/bsod-in-windows-7-new-install-435964.html
Relevancy 41.71%

Hey guys

I keep getting a BSOD when trying to reinstall windows 7 on my comp. It came up before so I decided to reformat the computer but now I can't even do that.
Heres the error, sorry i couldn't give any more information.

page fault in nonpaged area
0x00000050

I've tried looking up what that error could mean, and I've found out its either the memory, processor or graphics card. They said it could be the software, but since its reformatted I assume it can't be that.

Information about computer:
-32 bit capable of 64
-not original installed os
-retail
-bout 2 years old


Cheers
-Ash

A:BSOD while trying to install windows

Does the BSOD create a dump file?

http://www.sevenforums.com/bsod-help-support/139493-bsod-while-trying-install-windows.html
Relevancy 41.71%

Im getting a BSOD with error x Its a laptop HP CQ - EV without windows Im getting the blue screen when im trying to start the os installation from the win vista bit cd What i did First i tested memory with install BSOD to when trying windows memtest No errors but even with other memory im getting the same I did a bios update again i m getting the same Tried to reset bios to default settings and to remove cmos battery but nothing again Im out of ideas The only thing left now is the cpu test and im doing this while im writting this post There is something else that i can try maybe Thanks in advice P S The HD BSOD when trying to install windows is new also tested and passed the WD testing BSOD when trying to install windows tool without errors i moved the hp recovery partion from the old HD but even i tried to install windows from there im getting this blue screen P S sorry for not including what u ask but as i said i cant run windows on the machine

A:BSOD when trying to install windows

odd, what's the story of this pc ?

http://www.techsupportforum.com/forums/f299/bsod-when-trying-to-install-windows-589987.html
Relevancy 41.71%

I recently assembled a new computer and BSOD x64 install during 7 Windows I'm receiving a blue screen during the installation process After loading all of the drivers windows crashes on the screen where the windows logo is displayed before and kind of screens or prompts are displayed I'm getting the following error message STOP x E ACPI SYS Here are my system specs Core i - K Antec W x gb G Skill Ripjaw DDR ASRock Z Extreme LGA Radeon HD PCI-E WD Caviar TB rpm I have tried quite a few things to narrow down the problems I don't believe my ram is the issue I have run memtest on it and it tested all gigs with no errors Out of frustration I have also taken my hdd and the windows iso dvd to an existing computer pulled the hdd from that and Windows 7 x64 BSOD during install installed windows on the new hdd thinking that I could put that drive in my new computer after the install However I'm getting the same problem when that hdd is put back in my new machine and I attempt to boot from it I think that this does exclude the hdd or the burned iso dvd as being the issue Windows 7 x64 BSOD during install though I Windows 7 x64 BSOD during install also put in a linux dvd and booted from linux live thinking that I could get additional error messaging but I was surprised to find that my computer booted into linux just fine I have tried stripping everything out of the mobo and running off what the bare minimum requirements were to boot I have also tried taking out all the components and putting them back in including cpu and I have verified that no cables are loose I have also tried re-ordering the sata cables between the dvd drive and the hdd So far nothing I have tried has worked The bios does not post any kind of errors I'm running out of ideas I feel like I've gone through just about every potential problem that could be causing this Thanks in advance for looking into this with me

A:Windows 7 x64 BSOD during install

In BIOS under Advanced you should be able to see the settings for Hard drive or sata controller
make sure your settings are set to SATa/IDE not AHCI or raid
save and exit
try to install windows again
I would also look at the DVD you have for windows and if possible burn an other dvd maybe something is wrong during the burning process

http://www.techsupportforum.com/forums/f299/windows-7-x64-bsod-during-install-643475.html
Relevancy 41.71%

hi i built my friends computer for him not my first and went to install win ultimate bit the system booted just fine started the quot windows is loading files quot screen once all the files loaded it went to the quot starting windows quot screen where the orbs of light come together to form the windows emblem but a couple seconds after it goes from loading files to starting it BSODs the system specs are -Windows ultimate Bit - purchased -OEM caviar green WD GB HDD -OEM Samsung Bluray drive -AMD Phenon II x processor -Asus M A TD EVO motherboard -EVGA Nvidia GSO video card -Rosewill watt PSU i have updated the bios to the most recent build and the bsod changed what it was complaining about from netio sys DRIVER IRQL NOT LESS OR EQUAL to netio sys PAGE FAULT IN NONPAGED AREA this happens with win bit i tried to install bit install windows 7 BSOD on vista ultimate and it bsoded again same place only the bsod pointed to something else pci sys PAGE FAULT IN NONPAGED AREA STOP x oxffffff x x e fc x pci sys - address e fc base at datestamp adc after that i tried to install windows xp home ed sp that actually worked and i was able to run it and got it updated to sp and ran the BSOD on windows 7 install windows update advisor that file is attached bit and bit said the same thing BSOD on windows 7 install after BSOD on windows 7 install it was fully updated i put the vista bit disk back in to try the upgrade system option it work just fine till it had to restart at which point it would load a black screen and do nothing i thought that it might have been caused by the upgrading maybe the MBR needed to be reset so i put in my win boot loader repair disk but right after that loaded the files it BSODed last ditch effort i tried a copy of windows ultimate bit once it finished loading files it froze in the quot starting windows quot screen so i tried it again but told it to boot setup in safemode that seemed to work it started spewing all the drivers that it was loading then once it reached quot disk sys quot it BSODed pointing at quot msrpc sys quot with a datestamp of quot quot right now the computer is running killdisk to reformat the HDD i am running out of ideas please help me

A:BSOD on windows 7 install

How is your drive configured in the BIOS - as SATA or IDE? Have you updated the BIOS? Have you set default values in the BIOS? How much RAM do you have installed? Have you tried installing with all but the basic hardware installed? Have you tried disabling your onboard NIC?

http://www.sevenforums.com/installation-setup/95437-bsod-windows-7-install.html
Relevancy 41.71%

Hello,
I am having issues with random bsod on a newly assembled pc. I am running an asus p7p55d-e and core i7 860 and 8gb's g.skill F3-12800CL9D-4GBNQ. As I say it is completely random. The first time it occurred was while first installing windows. It was about 35% of the way through the process. Since then it is completely random. Any help would be greatly appreciated. I have run memtest with 6 passes and no errors. as you see in the dump files it seems to point to ntoskrnl.exe - Any help would be greatly appreciated. Attachment 63343

A:bsod on new install of windows 7

  
Quote: Originally Posted by billybobhobw


Hello,
I am having issues with random bsod on a newly assembled pc. I am running an asus p7p55d-e and core i7 860 and 8gb's g.skill F3-12800CL9D-4GBNQ. As I say it is completely random. The first time it occurred was while first installing windows. It was about 35% of the way through the process. Since then it is completely random. Any help would be greatly appreciated. I have run memtest with 6 passes and no errors. as you see in the dump files it seems to point to ntoskrnl.exe - Any help would be greatly appreciated. Attachment 63343


Hi billybobhobw.
These crashes were highly likely caused by memory.

You will need to do the following -
1. Memory-download memtestx86 and run for at least 5 passes
2. Run a system file check to verify and repair your system files.
Go to search - right click to run as Administrator - type in sfc /scannow.
[Make sure you have a space between sfc and / ]
3.If you are overclocking-stop
4.You must update the old drivers.

Please report back & let us know the results.
Thanks. Jan.



Code:
032610-22869-01.dmp 27/03/2010 3:22:53 PM BAD_POOL_HEADER 0x00000019 00000000`00000003 fffff8a0`09b55620 fffff8a0`09b55620 fa800884`9f9004c0 fltmgr.sys fltmgr.sys+4962 x64 C:\Users\JMH\Desktop\dump-files\032610-22869-01.dmp 8 15 7600
032510-21918-01.dmp 27/03/2010 3:22:53 PM MEMORY_MANAGEMENT 0x0000001a 00000000`00041790 fffffa80`0318f570 00000000`0000ffff 00000000`00000000 ntoskrnl.exe ntoskrnl.exe+71f00 x64 C:\Users\JMH\Desktop\dump-files\032510-21918-01.dmp 8 15 7600
032510-19562-01.dmp 27/03/2010 3:22:53 PM MEMORY_MANAGEMENT 0x0000001a 00000000`00041790 fffffa80`03265d40 00000000`0000ffff 00000000`00000000 ntoskrnl.exe ntoskrnl.exe+71f00 x64 C:\Users\JMH\Desktop\dump-files\032510-19562-01.dmp 8 15 7600
032510-19094-01.dmp 27/03/2010 3:22:53 PM MEMORY_MANAGEMENT 0x0000001a 00000000`00041790 fffffa80`031ec570 00000000`0000ffff 00000000`00000000 ntoskrnl.exe ntoskrnl.exe+71f00 x64 C:\Users\JMH\Desktop\dump-files\032510-19094-01.dmp 8 15 7600
032510-18236-01.dmp 27/03/2010 3:22:53 PM MEMORY_MANAGEMENT 0x0000001a 00000000`00041790 fffffa80`03250d70 00000000`0000ffff 00000000`00000000 ntoskrnl.exe ntoskrnl.exe+71f00 x64 C:\Users\JMH\Desktop\dump-files\032510-18236-01.dmp 8 15 7600

http://www.sevenforums.com/bsod-help-support/74022-bsod-new-install-windows-7-a.html