Windows Support Forum

Series of BSOD's

Q: Series of BSOD's

I have been getting constant blue screens with different messages every time ranging from irql is not less or equal to page in non paged area to just no message at all.
This usually happens within 2 minutes of booting up the computer.
The last time this happened I had just installed a new keyboard driver and uninstalling it fixed it.
This time it came out of nowhere and I cannot solve the problem.
please help.

I have an hp p6557c with an AMD Athlon II X2 220 processor 2.81 GHz
also I could not attach the perfmon file because it could not find the filepath.

Relevancy 100%
Preferred Solution: Series of BSOD's

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Series of BSOD's

Hello,

I would updating this old driver. Old drivers are obsolete and can cause BSOD. Update them (links are provided)





Quote:
hardlock.sys Tue Feb 03 04:34:08 2009 - Hardlock Device Driver
Aladdin Knowledge Systems: Support



Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {0, 2, 0, fffff80002c8e8b6}

Probably caused by : ntkrnlmp.exe ( nt!KeSetEvent+226 )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: 0000000000000000, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff80002c8e8b6, address which referenced memory

Debugging Details:
------------------
READ_ADDRESS: GetPointerFromAddress: unable to read from fffff80002ec20e0
0000000000000000

CURRENT_IRQL: 2

FAULTING_IP:
nt!KeSetEvent+226
fffff800`02c8e8b6 488b09 mov rcx,qword ptr [rcx]

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

BUGCHECK_STR: 0xA

PROCESS_NAME: System

TRAP_FRAME: fffff88002fd9810 -- (.trap 0xfffff88002fd9810)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=fffff88002565918 rbx=0000000000000000 rcx=0000000000000000
rdx=0000000000000001 rsi=0000000000000000 rdi=0000000000000000
rip=fffff80002c8e8b6 rsp=fffff88002fd99a0 rbp=0000000000000000
r8=0000000000000000 r9=0000000000000530 r10=0000000000000000
r11=fffffa8003d26b60 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei pl nz ac po cy
nt!KeSetEvent+0x226:
fffff800`02c8e8b6 488b09 mov rcx,qword ptr [rcx] ds:9390:00000000`00000000=????????????????
Resetting default scope

LAST_CONTROL_TRANSFER: from fffff80002c89ca9 to fffff80002c8a740

STACK_TEXT:
fffff880`02fd96c8 fffff800`02c89ca9 : 00000000`0000000a 00000000`00000000 00000000`00000002 00000000`00000000 : nt!KeBugCheckEx
fffff880`02fd96d0 fffff800`02c88920 : fffffa80`03d26b60 fffff880`02565910 00000000`000004d4 fffffa80`03d13740 : nt!KiBugCheckDispatch+0x69
fffff880`02fd9810 fffff800`02c8e8b6 : fffffa80`00000001 00000000`00000000 fffff880`025658d0 fffff880`025658d0 : nt!KiPageFault+0x260
fffff880`02fd99a0 fffffa80`047840fd : fffff880`00000000 fffffa80`00000000 fffffa80`00000000 ffffffff`800009d4 : nt!KeSetEvent+0x226
fffff880`02fd9a10 fffff880`00000000 : fffffa80`00000000 fffffa80`00000000 ffffffff`800009d4 00000000`00000000 : 0xfffffa80`047840fd
fffff880`02fd9a18 fffffa80`00000000 : fffffa80`00000000 ffffffff`800009d4 00000000`00000000 00000000`00000000 : 0xfffff880`00000000
fffff880`02fd9a20 fffffa80`00000000 : ffffffff`800009d4 00000000`00000000 00000000`00000000 00000000`0000081c : 0xfffffa80`00000000
fffff880`02fd9a28 ffffffff`800009d4 : 00000000`00000000 00000000`00000000 00000000`0000081c 00000000`00000000 : 0xfffffa80`00000000
fffff880`02fd9a30 00000000`00000000 : 00000000`00000000 00000000`0000081c 00000000`00000000 00000000`00000030 : 0xffffffff`800009d4
STACK_COMMAND: kb

FOLLOWUP_IP:
nt!KeSetEvent+226
fffff800`02c8e8b6 488b09 mov rcx,qword ptr [rcx]

SYMBOL_STACK_INDEX: 3

SYMBOL_NAME: nt!KeSetEvent+226

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: nt

IMAGE_NAME: ntkrnlmp.exe

DEBUG_FLR_IMAGE_TIMESTAMP: 4c1c44a9

FAILURE_BUCKET_ID: X64_0xA_nt!KeSetEvent+226

BUCKET_ID: X64_0xA_nt!KeSetEvent+226

Followup: MachineOwner
---------

0: kd> lmtsmn
start end module name
fffff880`00e3f000 fffff880`00e96000 ACPI ACPI.sys Tue Jul 14 11:19:34 2009 (4A5BC106)
fffff880`03c33000 fffff880`03cbd000 afd afd.sys Tue Jul 14 11:21:40 2009 (4A5BC184)
fffff880`04256000 fffff880`0426c000 AgileVpn AgileVpn.sys Tue Jul 14 12:10:24 2009 (4A5BCCF0)
fffff880`03471000 fffff880`03482580 aksdf aksdf.sys Sat Sep 19 01:04:24 2009 (4AB38558)
fffff880`03483000 fffff880`034a2f00 aksfridge aksfridge.sys Thu Aug 20 01:38:43 2009 (4A8C0063)
fffff880`03e7e000 fffff880`03e93000 amdppm amdppm.sys Tue Jul 14 11:19:25 2009 (4A5BC0FD)
fffff880`010c3000 fffff880`010ce000 amdxata amdxata.sys Wed May 20 05:56:59 2009 (4A12F2EB)
fffff960`00920000 fffff960`00981000 ATMFD ATMFD.DLL unavailable (00000000)
fffff880`019d0000 fffff880`019d7000 Beep Beep.SYS Tue Jul 14 12:00:13 2009 (4A5BCA8D)
fffff880`03c1e000 fffff880`03c2f000 blbdrive blbdrive.sys Tue Jul 14 11:35:59 2009 (4A5BC4DF)
fffff880`03572000 fffff880`03590000 bowser bowser.sys Tue Jul 14 11:23:50 2009 (4A5BC206)
fffff960`00630000 fffff960`00657000 cdd cdd.dll unavailable (00000000)
fffff880`01903000 fffff880`0192d000 cdrom cdrom.sys Tue Jul 14 11:19:54 2009 (4A5BC11A)
fffff880`00c95000 fffff880`00d55000 CI CI.dll Tue Jul 14 13:32:13 2009 (4A5BE01D)
fffff880`01869000 fffff880`01899000 CLASSPNP CLASSPNP.SYS Tue Jul 14 11:19:58 2009 (4A5BC11E)
fffff880`00c37000 fffff880`00c95000 CLFS CLFS.SYS Tue Jul 14 11:19:57 2009 (4A5BC11D)
fffff880`0118c000 fffff880`011ff000 cng cng.sys Tue Jul 14 11:49:40 2009 (4A5BC814)
fffff880`04246000 fffff880`04256000 CompositeBus CompositeBus.sys Tue Jul 14 12:00:33 2009 (4A5BCAA1)
fffff880`04893000 fffff880`048a1000 crashdmp crashdmp.sys Tue Jul 14 12:01:01 2009 (4A5BCABD)
fffff880`03c00000 fffff880`03c1e000 dfsc dfsc.sys Tue Jul 14 11:23:44 2009 (4A5BC200)
fffff880`03ded000 fffff880`03dfc000 discache discache.sys Tue Jul 14 11:37:18 2009 (4A5BC52E)
fffff880`01853000 fffff880`01869000 disk disk.sys Tue Jul 14 11:19:57 2009 (4A5BC11D)
fffff880`0486b000 fffff880`0488d000 drmk drmk.sys Tue Jul 14 13:01:25 2009 (4A5BD8E5)
fffff880`048a1000 fffff880`048ab000 dump_diskdump dump_diskdump.sys Tue Jul 13 15:32:05 2010 (4C3BDE35)
fffff880`048ea000 fffff880`048fd000 dump_dumpfve dump_dumpfve.sys Tue Jul 14 11:21:51 2009 (4A5BC18F)
fffff880`048ab000 fffff880`048ea000 dump_nvstor64 dump_nvstor64.sys Wed Aug 05 12:31:07 2009 (4A78D2CB)
fffff880`048fd000 fffff880`04909000 Dxapi Dxapi.sys Tue Jul 14 11:38:28 2009 (4A5BC574)
fffff880`042f4000 fffff880`043e8000 dxgkrnl dxgkrnl.sys Tue Nov 02 15:51:31 2010 (4CCF7CB3)
fffff880`04200000 fffff880`04246000 dxgmms1 dxgmms1.sys Tue Nov 02 15:50:56 2010 (4CCF7C90)
fffff880`04974000 fffff880`049aa000 fastfat fastfat.SYS Tue Jul 14 11:23:28 2009 (4A5BC1F0)
fffff880`0111a000 fffff880`0112e000 fileinfo fileinfo.sys Tue Jul 14 11:34:25 2009 (4A5BC481)
fffff880`010ce000 fffff880`0111a000 fltmgr fltmgr.sys Tue Jul 14 11:19:59 2009 (4A5BC11F)
fffff880`01211000 fffff880`0121b000 Fs_Rec Fs_Rec.sys Tue Jul 14 11:19:45 2009 (4A5BC111)
fffff880`01819000 fffff880`01853000 fvevol fvevol.sys Sat Sep 26 14:34:26 2009 (4ABD7DB2)
fffff880`0142b000 fffff880`01475000 fwpkclnt fwpkclnt.sys Tue Jul 14 11:21:08 2009 (4A5BC164)
fffff880`03f7b000 fffff880`03f88000 GEARAspiWDM GEARAspiWDM.sys Tue May 19 00:17:04 2009 (4A1151C0)
fffff800`031f6000 fffff800`0323f000 hal hal.dll Tue Jul 14 13:27:36 2009 (4A5BDF08)
fffff880`049aa000 fffff880`049f7c00 hardlock hardlock.sys Tue Feb 03 04:34:08 2009 (49871270)
fffff880`03f05000 fffff880`03f29000 HDAudBus HDAudBus.sys Tue Jul 14 12:06:13 2009 (4A5BCBF5)
fffff880`04b36000 fffff880`04b4f000 HIDCLASS HIDCLASS.SYS Tue Jul 14 12:06:21 2009 (4A5BCBFD)
fffff880`04b4f000 fffff880`04b57080 HIDPARSE HIDPARSE.SYS Tue Jul 14 12:06:17 2009 (4A5BCBF9)
fffff880`04b28000 fffff880`04b36000 hidusb hidusb.sys Tue Jul 14 12:06:22 2009 (4A5BCBFE)
fffff880`034aa000 fffff880`03572000 HTTP HTTP.sys Tue Jul 14 11:22:16 2009 (4A5BC1A8)
fffff880`015ef000 fffff880`015f8000 hwpolicy hwpolicy.sys Tue Jul 14 11:19:22 2009 (4A5BC0FA)
fffff880`043e8000 fffff880`043f7000 kbdclass kbdclass.sys Tue Jul 14 11:19:50 2009 (4A5BC116)
fffff880`04b9f000 fffff880`04bad000 kbdhid kbdhid.sys Tue Jul 14 12:00:20 2009 (4A5BCA94)
fffff800`00bc4000 fffff800`00bc7000 kdcom kdcom.dll Sat Oct 09 00:17:09 2010 (4CAEFDB5)
fffff880`10b89000 fffff880`10bcc000 ks ks.sys Thu Mar 04 17:32:25 2010 (4B8F37D9)
fffff880`013d6000 fffff880`013f0000 ksecdd ksecdd.sys Tue Jul 14 11:20:54 2009 (4A5BC156)
fffff880`01400000 fffff880`0142b000 ksecpkg ksecpkg.sys Fri Dec 11 19:03:32 2009 (4B21E0B4)
fffff880`0488d000 fffff880`04892200 ksthunk ksthunk.sys Tue Jul 14 12:00:19 2009 (4A5BCA93)
fffff880`04a00000 fffff880`04a15000 lltdio lltdio.sys Tue Jul 14 12:08:50 2009 (4A5BCC92)
fffff880`04bbb000 fffff880`04bde000 luafv luafv.sys Tue Jul 14 11:26:13 2009 (4A5BC295)
fffff880`05987000 fffff880`05991000 LVPr2M64 LVPr2M64.sys Sat May 08 13:38:16 2010 (4BE4C088)
fffff880`00c16000 fffff880`00c23000 mcupdate_AuthenticAMD mcupdate_AuthenticAMD.dll Tue Jul 14 13:29:09 2009 (4A5BDF65)
fffff880`04bad000 fffff880`04bbb000 monitor monitor.sys Tue Jul 14 11:38:52 2009 (4A5BC58C)
fffff880`10b7a000 fffff880`10b89000 mouclass mouclass.sys Tue Jul 14 11:19:50 2009 (4A5BC116)
fffff880`04b92000 fffff880`04b9f000 mouhid mouhid.sys Tue Jul 14 12:00:20 2009 (4A5BCA94)
fffff880`00f6f000 fffff880`00f89000 mountmgr mountmgr.sys Tue Jul 14 11:19:54 2009 (4A5BC11A)
fffff880`03590000 fffff880`035a8000 mpsdrv mpsdrv.sys Tue Jul 14 12:08:25 2009 (4A5BCC79)
fffff880`035a8000 fffff880`035d5000 mrxsmb mrxsmb.sys Sat Feb 27 20:52:19 2010 (4B88CF33)
fffff880`03400000 fffff880`0344e000 mrxsmb10 mrxsmb10.sys Sat Feb 27 20:52:28 2010 (4B88CF3C)
fffff880`0344e000 fffff880`03471000 mrxsmb20 mrxsmb20.sys Sat Feb 27 20:52:26 2010 (4B88CF3A)
fffff880`0197d000 fffff880`01988000 Msfs Msfs.SYS Tue Jul 14 11:19:47 2009 (4A5BC113)
fffff880`00e9f000 fffff880`00ea9000 msisadrv msisadrv.sys Tue Jul 14 11:19:26 2009 (4A5BC0FE)
fffff880`0112e000 fffff880`0118c000 msrpc msrpc.sys Tue Jul 14 11:21:32 2009 (4A5BC17C)
fffff880`03de2000 fffff880`03ded000 mssmbios mssmbios.sys Tue Jul 14 11:31:10 2009 (4A5BC3BE)
fffff880`015dd000 fffff880`015ef000 mup mup.sys Tue Jul 14 11:23:45 2009 (4A5BC201)
fffff880`0148b000 fffff880`0157d000 ndis ndis.sys Tue Jul 14 11:21:40 2009 (4A5BC184)
fffff880`04290000 fffff880`0429c000 ndistapi ndistapi.sys Tue Jul 14 12:10:00 2009 (4A5BCCD8)
fffff880`04a15000 fffff880`04a28000 ndisuio ndisuio.sys Tue Jul 14 12:09:25 2009 (4A5BCCB5)
fffff880`0429c000 fffff880`042cb000 ndiswan ndiswan.sys Tue Jul 14 12:10:11 2009 (4A5BCCE3)
fffff880`10bde000 fffff880`10bf3000 NDProxy NDProxy.SYS Tue Jul 14 12:10:05 2009 (4A5BCCDD)
fffff880`03d47000 fffff880`03d56000 netbios netbios.sys Tue Jul 14 12:09:26 2009 (4A5BCCB6)
fffff880`03cbd000 fffff880`03d02000 netbt netbt.sys Tue Jul 14 11:21:28 2009 (4A5BC178)
fffff880`0157d000 fffff880`015dd000 NETIO NETIO.SYS Tue Jul 14 11:21:46 2009 (4A5BC18A)
fffff880`04a2e000 fffff880`04b28000 netr28ux netr28ux.sys Thu Aug 06 01:59:46 2009 (4A799052)
fffff880`01988000 fffff880`01999000 Npfs Npfs.SYS Tue Jul 14 11:19:48 2009 (4A5BC114)
fffff880`03dd6000 fffff880`03de2000 nsiproxy nsiproxy.sys Tue Jul 14 11:21:02 2009 (4A5BC15E)
fffff800`02c1a000 fffff800`031f6000 nt ntkrnlmp.exe Sat Jun 19 16:16:41 2010 (4C1C44A9)
fffff880`01233000 fffff880`013d6000 Ntfs Ntfs.sys Tue Jul 14 11:20:47 2009 (4A5BC14F)
fffff880`019c7000 fffff880`019d0000 Null Null.SYS Tue Jul 14 11:19:37 2009 (4A5BC109)
fffff880`10b3d000 fffff880`10b3e180 nvBridge nvBridge.kmd Thu Apr 01 21:26:11 2010 (4BB458A3)
fffff880`0fe04000 fffff880`10b3c500 nvlddmkm nvlddmkm.sys Thu Apr 01 21:36:51 2010 (4BB45B23)
fffff880`03f29000 fffff880`03f7a500 nvmf6264 nvmf6264.sys Fri Jul 31 11:48:18 2009 (4A723142)
fffff880`00f89000 fffff880`00fc8000 nvstor64 nvstor64.sys Wed Aug 05 12:31:07 2009 (4A78D2CB)
fffff880`04909000 fffff880`0495c000 nwifi nwifi.sys Tue Jul 14 12:07:23 2009 (4A5BCC3B)
fffff880`03d0b000 fffff880`03d31000 pacer pacer.sys Tue Jul 14 12:09:41 2009 (4A5BCCC5)
fffff880`00ee9000 fffff880`00efe000 partmgr partmgr.sys Tue Jul 14 11:19:58 2009 (4A5BC11E)
fffff880`00ea9000 fffff880`00edc000 pci pci.sys Tue Jul 14 11:19:51 2009 (4A5BC117)
fffff880`01200000 fffff880`01211000 pcw pcw.sys Tue Jul 14 11:19:27 2009 (4A5BC0FF)
fffff880`0503c000 fffff880`050e2000 peauth peauth.sys Tue Jul 14 13:01:19 2009 (4A5BD8DF)
fffff880`03e00000 fffff880`03e3d000 portcls portcls.sys Tue Jul 14 12:06:27 2009 (4A5BCC03)
fffff880`00c23000 fffff880`00c37000 PSHED PSHED.dll Tue Jul 14 13:32:23 2009 (4A5BE027)
fffff880`0426c000 fffff880`04290000 rasl2tp rasl2tp.sys Tue Jul 14 12:10:11 2009 (4A5BCCE3)
fffff880`042cb000 fffff880`042e6000 raspppoe raspppoe.sys Tue Jul 14 12:10:17 2009 (4A5BCCE9)
fffff880`10b3f000 fffff880`10b60000 raspptp raspptp.sys Tue Jul 14 12:10:18 2009 (4A5BCCEA)
fffff880`10b60000 fffff880`10b7a000 rassstp rassstp.sys Tue Jul 14 12:10:25 2009 (4A5BCCF1)
fffff880`03d85000 fffff880`03dd6000 rdbss rdbss.sys Tue Jul 14 11:24:09 2009 (4A5BC219)
fffff880`01962000 fffff880`0196b000 RDPCDD RDPCDD.sys Tue Jul 14 12:16:34 2009 (4A5BCE62)
fffff880`0196b000 fffff880`01974000 rdpencdd rdpencdd.sys Tue Jul 14 12:16:34 2009 (4A5BCE62)
fffff880`01974000 fffff880`0197d000 rdprefmp rdprefmp.sys Tue Jul 14 12:16:35 2009 (4A5BCE63)
fffff880`00e00000 fffff880`00e3a000 rdyboost rdyboost.sys Tue Jul 14 11:34:34 2009 (4A5BC48A)
fffff880`0495c000 fffff880`04974000 rspndr rspndr.sys Tue Jul 14 12:08:50 2009 (4A5BCC92)
fffff880`0440b000 fffff880`045f2a80 RTKVHD64 RTKVHD64.sys Tue Sep 15 23:02:10 2009 (4AAF7432)
fffff880`050e2000 fffff880`050ed000 secdrv secdrv.SYS Thu Sep 14 01:18:38 2006 (4508052E)
fffff880`01475000 fffff880`0147d000 spldr spldr.sys Tue May 12 04:56:27 2009 (4A0858BB)
fffff880`019b3000 fffff880`019c7000 SRTSPX64 SRTSPX64.SYS Fri Aug 21 18:54:18 2009 (4A8E449A)
fffff880`058f1000 fffff880`05987000 srv srv.sys Fri Aug 27 15:38:00 2010 (4C773318)
fffff880`0512c000 fffff880`05193000 srv2 srv2.sys Fri Aug 27 15:37:46 2010 (4C77330A)
fffff880`050ed000 fffff880`0511a000 srvnet srvnet.sys Fri Aug 27 15:37:24 2010 (4C7732F4)
fffff880`01061000 fffff880`010c3000 storport storport.sys Tue Jul 14 12:01:18 2009 (4A5BCACE)
fffff880`043f7000 fffff880`043f8480 swenum swenum.sys Tue Jul 14 12:00:18 2009 (4A5BCA92)
fffff880`01602000 fffff880`017ff000 tcpip tcpip.sys Mon Jun 14 15:39:04 2010 (4C15A458)
fffff880`0511a000 fffff880`0512c000 tcpipreg tcpipreg.sys Tue Jul 14 12:09:49 2009 (4A5BCCCD)
fffff880`01999000 fffff880`019a6000 TDI TDI.SYS Tue Jul 14 11:21:18 2009 (4A5BC16E)
fffff880`00fc8000 fffff880`00fe6000 tdx tdx.sys Tue Jul 14 11:21:15 2009 (4A5BC16B)
fffff880`03d71000 fffff880`03d85000 termdd termdd.sys Tue Jul 14 12:16:36 2009 (4A5BCE64)
fffff960`004b0000 fffff960`004ba000 TSDDD TSDDD.dll unavailable (00000000)
fffff880`03e58000 fffff880`03e7e000 tunnel tunnel.sys Tue Jul 14 12:09:37 2009 (4A5BCCC1)
fffff880`10bcc000 fffff880`10bde000 umbus umbus.sys Tue Jul 14 12:06:56 2009 (4A5BCC20)
fffff880`04b5a000 fffff880`04b77000 usbccgp usbccgp.sys Tue Jul 14 12:06:45 2009 (4A5BCC15)
fffff880`04b58000 fffff880`04b59f00 USBD USBD.SYS Tue Jul 14 12:06:23 2009 (4A5BCBFF)
fffff880`03ef4000 fffff880`03f05000 usbehci usbehci.sys Sat Oct 24 17:27:33 2009 (4AE28235)
fffff880`03f88000 fffff880`03fe2000 usbhub usbhub.sys Sat Oct 24 17:28:24 2009 (4AE28268)
fffff880`03e93000 fffff880`03e9e000 usbohci usbohci.sys Tue Jul 14 12:06:30 2009 (4A5BCC06)
fffff880`03e9e000 fffff880`03ef4000 USBPORT USBPORT.SYS Tue Jul 14 12:06:31 2009 (4A5BCC07)
fffff880`04b77000 fffff880`04b92000 USBSTOR USBSTOR.SYS Tue Jul 14 12:06:34 2009 (4A5BCC0A)
fffff880`00edc000 fffff880`00ee9000 vdrvroot vdrvroot.sys Tue Jul 14 12:01:31 2009 (4A5BCADB)
fffff880`019d7000 fffff880`019e5000 vga vga.sys Tue Jul 14 11:38:47 2009 (4A5BC587)
fffff880`0192d000 fffff880`01952000 VIDEOPRT VIDEOPRT.SYS Tue Jul 14 11:38:51 2009 (4A5BC58B)
fffff880`00efe000 fffff880`00f13000 volmgr volmgr.sys Tue Jul 14 11:19:57 2009 (4A5BC11D)
fffff880`00f13000 fffff880`00f6f000 volmgrx volmgrx.sys Tue Jul 14 11:20:33 2009 (4A5BC141)
fffff880`01000000 fffff880`0104c000 volsnap volsnap.sys Tue Jul 14 11:20:08 2009 (4A5BC128)
fffff880`03d31000 fffff880`03d47000 vwififlt vwififlt.sys Tue Jul 14 12:07:22 2009 (4A5BCC3A)
fffff880`03d56000 fffff880`03d71000 wanarp wanarp.sys Tue Jul 14 12:10:21 2009 (4A5BCCED)
fffff880`01952000 fffff880`01962000 watchdog watchdog.sys Tue Jul 14 11:37:35 2009 (4A5BC53F)
fffff880`00d55000 fffff880`00df9000 Wdf01000 Wdf01000.sys Tue Jul 14 11:22:07 2009 (4A5BC19F)
fffff880`00c00000 fffff880`00c0f000 WDFLDR WDFLDR.SYS Tue Jul 14 11:19:54 2009 (4A5BC11A)
fffff880`03d02000 fffff880`03d0b000 wfplwf wfplwf.sys Tue Jul 14 12:09:26 2009 (4A5BCCB6)
fffff960`00050000 fffff960`00360000 win32k win32k.sys unavailable (00000000)
fffff880`00e96000 fffff880`00e9f000 WMILIB WMILIB.SYS Tue Jul 14 11:19:51 2009 (4A5BC117)
fffff880`04bde000 fffff880`04bff000 WudfPf WudfPf.sys Tue Jul 14 12:05:37 2009 (4A5BCBD1)
fffff880`05991000 fffff880`059c2000 WUDFRd WUDFRd.sys Tue Jul 14 12:06:06 2009 (4A5BCBEE)

Unloaded modules:
fffff880`01899000 fffff880`018a7000 crashdmp.sys
Timestamp: unavailable (00000000)
Checksum: 00000000
ImageSize: 0000E000
fffff880`018a7000 fffff880`018b1000 dump_storpor
Timestamp: unavailable (00000000)
Checksum: 00000000
ImageSize: 0000A000
fffff880`018b1000 fffff880`018f0000 dump_nvstor6
Timestamp: unavailable (00000000)
Checksum: 00000000
ImageSize: 0003F000
fffff880`018f0000 fffff880`01903000 dump_dumpfve
Timestamp: unavailable (00000000)
Checksum: 00000000
ImageSize: 00013000
fffff880`0192d000 fffff880`019b3000 SRTSP64.SYS
Timestamp: unavailable (00000000)
Checksum: 00000000
ImageSize: 00086000

http://www.sevenforums.com/bsod-help-support/143838-series-bsods.html
Relevancy 29.24%

A barrage of leaks over the past few months left little to the imagination once it came time for AMD to officially unveil its Radeon 300 series graphics cards. Regardless, AMD filled us in on all of the pertinent details...

Read more
 

A:AMD officially announces Radeon 300 series graphics cards at E3

Hmm so the rebranded cards didn't get an GCN update to 1.2 which blows

The increase in clock speeds and Vram isn't enough alone.
 

http://www.techspot.com/community/topics/amd-officially-announces-radeon-300-series-graphics-cards-at-e3.214879/
Relevancy 28.81%

AMD's upcoming Radeon 300 series graphics cards may end up being rebadged 200 series cards with minor tweaks but it's not all bad news for gamers. WCCFtech has it on good authority (they're confident enough to drop the "rumor" tag...

Read more
 

A:AMD Radeon 300 series graphics card pricing leaks online

Rebrands or no, that extra memory will put some pressure on NVIDIA's lower end cards.
 

http://www.techspot.com/community/topics/amd-radeon-300-series-graphics-card-pricing-leaks-online.213820/
Relevancy 29.67%

Basically I think it s Laptop Samsung Ultrabook Series 5 Problems; been happening for a month now My laptop screen glitches - the images distorting and sometimes green text appearing - Laptop Problems; Samsung Ultrabook Series 5 before Laptop Problems; Samsung Ultrabook Series 5 righting itself and crashing The only way I can get the Laptop Problems; Samsung Ultrabook Series 5 laptop to function again is to turn it off via the power button or take the battery out and put it back it again It has also become slow starting up - taking at least five minutes before you can log in and then a further five before you can actually do anything The cursor sometimes gets stuck in the center of the screen - I can access things using the tab screen but the cursor won t move whether I use the laptop touchpad or my USB mouse The fan has also been sporadically speeding up before calming down again - even though I ve been doing the same thing for the past god knows when I ve done a boot-up scan using avast had a look through all of my files and gotten rid of any old files that I don t need on there in an attempt to create some space but I ve got about - gb free so I can t see why that should be a problem Nothing happens before the glitches crashes so I don t think I m causing it by moving it and so on About a month ago the charger port was fixed at a laptop repair shop and then the laptop itself was sent off to SAMSUNG to have the motherboard replaced because I mistakenly wiped the bios since one driver update shut the laptop off in the middle of the bios update so I don t know if something is loose and so on I m planning on selling it in a month or two so it s not that much of a problem but of course I don t want to sell it to someone if its being a pain in the backside I also switched from integrated graphics to a nvidia geforce graphics card that is in the laptop when I bought it so that might be why Basic Info Samsung Ultrabook Series Intel Core i GB Ram TB Hardrive bit Operating System NVIDIA Geforce GT M nbsp

A:Laptop Problems; Samsung Ultrabook Series 5

This sort of problem is tough to troubleshoot over the internet. It could be quite a few things that could cause the symptoms that you're experiencing. With that said, I'd probably start with updating the discrete GPU drivers. Since you did switch from integrated to discrete, this could be the main cause for the graphic glitches which is probably crashing the system.

Moving forward, I think you should download something like CPU-Z to monitor the CPU load and temperatures during the crashes. It could be that your CPU is overheating and could use some attention.
 

http://www.techspot.com/community/topics/laptop-problems-samsung-ultrabook-series-5.213703/
Relevancy 29.67%

AMD has quietly launched a new range of graphics cards designed for OEMs and system builders that fall under Radeon 300 series branding. Like with the HD 8000 series a couple of years ago, these cards are essentially all rebrands...

Read more
 

A:AMD launches Radeon 300 series rebrands for OEMs

I really like AMD but they've been disappointing lately
 

http://www.techspot.com/community/topics/amd-launches-radeon-300-series-rebrands-for-oems.212743/
Relevancy 28.81%

I don't really know a lot about upgrading my computer. Any help would be great. Thanks.
 

A:Budget upgrade for HP/Compaq Presario CQ5000 Series Desktop CQ5802

I forgot to mention I am trying to make it run games like CS:GO and DayZ at a reasonable level.
 

http://www.techspot.com/community/topics/budget-upgrade-for-hp-compaq-presario-cq5000-series-desktop-cq5802.212644/
Relevancy 29.24%

Hidden in the latest AMD Catalyst 15.3 beta drivers, released alongside FreeSync last week, are a few pieces of information that hint at what might be in store for the upcoming Radeon Rx 300 series. Specifically, we might be in...

Read more
 

A:AMD Radeon Rx 300 series rumored to include many rebranded cards

It saves money on R&D and manufacturing as you don't have to research anything new or get in/ change any equipment which is good for the business as it's saving costs, but it is poor for technology and comes across as incredibly lazy. It's 2015 and they're still releasing cards produced in 2012, at least Nvidia cards offer some improvements, even if they are a rebrand.
 

http://www.techspot.com/community/topics/amd-radeon-rx-300-series-rumored-to-include-many-rebranded-cards.210639/
Relevancy 30.1%

I've been playing World of Tanks on High graphics, but even just in the garage looking at my vehicles the internal temperature rises to a peak (so far) of 58C with my fan on 100%.
Is this too much for my computer?
 

A:AMD Radeon HD 5800 series 50C-58C

No - especially not for an AMD card.
 

http://www.techspot.com/community/topics/amd-radeon-hd-5800-series-50c-58c.210812/
Relevancy 30.1%

I need to figure out how to get my webcam and camera working and what drivers I need anyone gt that answer pls
 

A:Gateway NE71B Series

Go here - http://us.gateway.com/gw/en/US/content/drivers-downloads
Then put "NE71B" in the product model box. You may also need to change the OS version to 64-bit, before a listing will show.
The camera software is listed under the application tab.
I didn't see a driver listing for the camera, so Windows may have generic drivers installed.
If reinstalling software doesn't work, I'm not sure what else to say.

Good luck with your repairs.
 

http://www.techspot.com/community/topics/gateway-ne71b-series.207366/
Relevancy 30.96%

Hope someone can offer some insight. I see where many, if not all the brands, Asus, MSI, etc. have guys asking for vBIOS updates in various forums to solve problems with display. What is the general incompatibility issue? Any light that can be shed is appreciated
 

A:AMD R Series GPU's

EClyde said:





Hope someone can offer some insight. I see where many, if not all the brands, Asus, MSI, etc. have guys asking for vBIOS updates in various forums to solve problems with display. What is the general incompatibility issue? Any light that can be shed is appreciatedClick to expand...

It depends on what you are referring to, there is not real issues with the R series GPU's in terms of display output. Most of the associated problems people are having involve a few things:

Some of the 4k monitors (The AOC for instance) use a very odd way to refresh which caused the display to flicker on the R9 series GPU's which was resolved in a recent patch.

Some high refresh displays using DP

and some others

However I would not worry, most of the problems if any are fixed via patches and catalyst revisions. If the manufacturer has to update something like the this its normally involves something like with their own software or certain things in environments not working together properly. I would not worry, I have done nothing to my PowerColor R9 290X trio and they all work great.
 

http://www.techspot.com/community/topics/amd-r-series-gpus.203984/
Relevancy 30.1%

http://www.maximumpc.com/article/news/nvidias_may_launch_geforce_700_series_gpus_computex_2013

I feel like there is some truth to this since nVidia doesnt really need a major refresh like AMD does.
 

http://www.techspot.com/community/topics/geforce-700-series-in-june.191591/
Relevancy 29.67%

Guys,I m planning to buy a new cpu.Just come to know that very soon this series will release.I have budget about 255$ for gpu.can u tell me when will it release?so I can afford more powerful gpu with this money.
Thanks.
 

A:When will the Radeon 8000 or GeForce 700 series be released?

Well, I wouldn't expect to see any HD 8XXX series card this year. However, I'm not so sure about Nvidia.
 

http://www.techspot.com/community/topics/when-will-the-radeon-8000-or-geforce-700-series-be-released.190670/
Relevancy 30.1%

I just replaced the Motherboard today for a customer, it worked just great! I went into the bios and recalibrated the battery. Problem is that I think it burnt out the laptop because the laptop will not power on at all, just like before I replaced it.

What I ment was that I think calibration caused the burn-out of the board
 

A:Gateway M-Series will not power on

Laptop motherboards can fail quickly. Was this a new or used board. I really doubt that a battery calibration would damage the motherboard. Have you tried starting the laptop with the battery out?
 

http://www.techspot.com/community/topics/gateway-m-series-will-not-power-on.188228/
Relevancy 29.67%

Just installed an Intel 330 120GB SSD on my computer running Windows 8. This is an older system with a Penryn1600SLI-110dB (Asrok) mobo, Q6600 cpu.

I see the drive in the BIOS. I see the drive under Hard Drives in the Device Manager.

I do not see the drive under File Manager. I do not see the drive under Disk Management.

When I try to use the Intel Solid State Toolbox, it says

"The Intel SSD Toolbox cannot communicate with the selected Intel SSD.
Consider changing to another storage driver compatible with your system and try the tool again."

I'm a noob so I guess my questions are what driver should I use and where would I find it?
 

A:Intel Series 330 SSD not recognized by Windows 8

You are going to have to configure the SSD to be able for Windows to see it. Do you have the Intel Rapid Storage utility installed?
 

http://www.techspot.com/community/topics/intel-series-330-ssd-not-recognized-by-windows-8.187713/
Relevancy 26.23%

At random times, the CTRL key on my laptop will act as if it is constantly pushed down. I am unable to type and it is annoying. I have turned off sticky keys, and have tried pushing both the left and right CTRL keys simultaneously to turn it off. The only solution is a reboot of the computer. Is there anyway I can fix this??
 

A:CTRL key "stuck" on laptop, Asus N55S series, Windows 7

It may be time to replace the keyboard. They're not expensive and relatively easy to replace
 

http://www.techspot.com/community/topics/ctrl-key-stuck-on-laptop-asus-n55s-series-windows-7.186720/
Relevancy 29.67%

Hey guys, so I've been getting a few questions lately regarding the intel vPro processors.
Now I've heard about these before, but only scantily, so what I've gained in terms of knowledge is that I believe they are used for business computers or something of the sort (?)
anyway was just wondering if somebody with some actual knowledge of these curious CPU's could help me out with a few general pointers.

1. What are the vPro series used for primarily? Gaming? Servers? Number-Crunching?
2. Could you give me a rundown of how they stack up against some other popular CPUs?
3. Pros/Cons

I look forward to seeing any potential answers, after all I'm keen to learn
 

A:Intel vPro series query

This should answer your questions:
http://www.intel.com/content/www/us/en/architecture-and-technology/vpro/vpro-technology-general.html
 

http://www.techspot.com/community/topics/intel-vpro-series-query.184895/
Relevancy 30.1%

I am looking for a RAM card for an old HP 6600 series computer running Windows 95. Does anyone have any suggestions on a card.
Thanks
 

A:Need RAM card for HP 6600 series

Wow, I haven't seen an old HP Pavilion 6000 series computer in a good long time! Your going to be a little hard pressed when going to your local computer store and trying to buy a stick of RAM for this thing. Man, a 6600 running Windows 95, I haven't seen a computer run Windows 95 in eons. Well I'll try my best to snap out of my little "shock and ahhhh" thing and get back to talking about the RAM.

Again, going to your local computer store might be pointless, most likely they aren't going to have anything for you. But by happens chance I took the liberty in doing a bit of searching on-line for a supplier that still provides RAM for the old HP Pavilion 6000 series. Give the following place a look...

Arch Memory Store
http://www.archmemory.com/ram.cfm/H...y-RAM-for-HP-Pavilion-6600-Series-23118-63607

Now seeing what I saw on that web site made me shake my head and think to myself that upgrading this old dinosaur of yours might not be worth it. This web site only provides 3 different memory sizes for your computer. (1) 32MB's, (2) 64MB's and last (3) 128MB's of memory! I'd hate to hear what your system currently has as far as the amount of memory it has. With a bare minimum of 64MB's of RAM your system will run really bare bones and "no thrills" with something like Windows 2000 Professional! Your going to have to pump it up a notch and maybe try for 128MB's of RAM, if you want to install and run things, again at pretty much "no thrills" with something like Windows XP. But with Operating Systems like Windows Vista, Windows 7 and the up and coming Windows 8, I don't care how much RAM you try to squeeze into that old computer, it isn't going to be close to enough.

Again, if I'm on the mark here and truly found your computer and this is the one, I would again think twice about upgrading it! Plus with it running Windows 95, finding product support for that via the web is going to be impossible, Microsoft stopped providing support for that product 17 years ago.

I'll shut up now, just due to bafflement alone, I can't stop rambling about this!

Good luck.....

**Zen exits the room, shaking his head with a baffled look upon his face**
 

http://www.techspot.com/community/topics/need-ram-card-for-hp-6600-series.182803/
Relevancy 30.53%

I just got a new CPU, it's an AMD FX 4-core unit. I tried upgrading my motherboard's BIOS (my MB is a GA 880GM-USB3) to the two most recent BIOS, and it just makes my computer not even boot up with the new CPU in it. Even when I try putting in my old CPU, it won't boot up sometimes, so I have to keep swapping out processors until it boots up. Please help!
 

A:Why won't my new AMD-FX (series) CPU work?

Dont have a Fx series myself, but as far as I know they should work fine in an am3 motherboard. being backwards compatable (am3 +)

Clear your cmos after installing the new cpu, Reset your bios to optimal/auto, And double check your motherboard supports your cpu.

If that wont work I would RMA it if possible.

Hope this helps
 

http://www.techspot.com/community/topics/why-wont-my-new-amd-fx-series-cpu-work.182737/
Relevancy 29.24%

Following instructions I opened and cleaned the interior electronics after it developed overheating problems that would result in it powering down. Following reassembly the computer will eventually restart but only after failing bootup at leastg two times. At initial startup or boot from hibernation the computer does not appear to reach boot source but emits a series of beeps, first 1 beep, then 3 beeps, another three beeps, and finally 1 beep. These are all about 1 second long and seperated by 1 second. Pressing and holding the start button again sometimes resuls in a full repeat of the above or the computer emits the series of 1single beats, 4 beats, one second long and one second seperation. Eventually pressing and holding he power button will evenually result in hearing the computer attempt to boot from the CD ROM (which is second on the list after the Internal HDD). Any help would be appreciated.
 

A:Satellite M105 bootup problem -- series of 1 second beeps

There is a very good explanation of "Beep Codes" here:-
http://www.techspot.com/vb/topic95391.html
Hope it helps.
 

http://www.techspot.com/community/topics/satellite-m105-bootup-problem-series-of-1-second-beeps.179467/
Relevancy 29.67%

This place looks fairly active so I thought I d try it out and I hope everyone can help me out I ve been planning to buy a new gaming PC -- series? I for build should PC gaming 600 First wait Nvidia for years and now I m finally ready to start buying parts Here is what I was planning on buying Tower HAF CPU Intel i k HD graphics MOBO LGA Z USB type motherboard really don t know which one to get RAM x GB preferably with a heatspreader on don t know what to get DVD Standard dvd burner don t know which one to get Powersupply plus bronze gold certified and has enough wattage for SLI in the future HDD TB RPM don t have a specific one in mind OS Windows GPU Now the thing is with the series around the corner I m wondering if I should hold off my build and wait for it I m willing to wait and just buy my tower DVD HDD and OS while I wait because these don t really require any special compatability Otherwise I was looking at a GeForce GTX Then when the series comes out I will First gaming PC build -- should I wait for Nvidia 600 series? figure out what MOBO RAM CPU PSU etc I will need for them although I m sure the i k will suffice nbsp

A:First gaming PC build -- should I wait for Nvidia 600 series?

As you have already found ou, there will always be another "best" or another want... Get it now... Build it now, then use what you learn to design a better one, and sell this build to a friend. Don't wait... or you will wait for a new SSD... or a new Windows 8, or a new Super Duper...
 

http://www.techspot.com/community/topics/first-gaming-pc-build-should-i-wait-for-nvidia-600-series.177295/
Relevancy 29.67%

What are your thoughts on this new case from CM i like it but am not sure weather i should get it or not.
 

A:Cooler Master CM Storm Series Trooper

no thoughts on this case?
 

http://www.techspot.com/community/topics/cooler-master-cm-storm-series-trooper.172611/
Relevancy 29.67%

Hello Techspot,

I would just like to know your opinions on waiting for the Radeon HD 7000 series. It is more discussion like then a personal question.

I would like to know if you will wait for the HD 7000 series, and why.
 

A:AMD Radeon HD 7000 series -- is it worth waiting?

No, the 6870 should do me if I decide to upgrade my 4870.
 

http://www.techspot.com/community/topics/amd-radeon-hd-7000-series-is-it-worth-waiting.170385/
Relevancy 29.24%

I have a Hp Pavilion with a 4.2 score, AMD Turion II P560 Dual-Core 2.50GHz, 4gb ram 300 gb storage, and a AMD M880G with ATI Mobility Radeon HD 4250. I can play games like minecraft well on High performance and HD, 3D graphics but I want to play more games like Battlefield and Black Ops, MW2 MW3 -Beta. I use Game booster but it only seems to end my processes, how can i run my laptop to be faster for gaming without lag?
 

A:How can I make my HP Pavillion G-series computer run games faster?

go into battery settings and change to high performance, also most the time with laptops specs dont handle like there advertised due to battery and "saving space" issues. On top of that just try doing the normal, clear off empty hdd space, and use a good defrag program like auslogics and optimize to read the data faster. Trust me gaming is hard enough with just BF2 on my dinosaur of a laptop stuck to windowed resolutions of 800x600
 

http://www.techspot.com/community/topics/how-can-i-make-my-hp-pavillion-g-series-computer-run-games-faster.170081/
Relevancy 25.8%

Hello TechSpotians I have been thinking about gettin myself an upgrade for my PC You may have seen many of my threads and may have called me quick at changing my mind 6950 Radeon the 7xxx the series or for 2GB? get HD HD Wait Radeon looks at Leeky As the title states I would like to get myself a hd GB I have read something up on the future hd xxx series and articles Wait for the Radeon HD 7xxx series or get the HD Radeon 6950 2GB? said that they would have more processing power and etc I have heard that AMD might be releasing some of the hd xxx series Q and start mass manufacturing in Q But as AMD starts the production of the office cards first Wait for the Radeon HD 7xxx series or get the HD Radeon 6950 2GB? and then up to the high end cards it might take a while So my question is will it be worth the time to wait for the hd xxx series or just get Wait for the Radeon HD 7xxx series or get the HD Radeon 6950 2GB? the hd Thanks EDIT I don t think it is known if the xxx series will support CrossFire with the xxx series but I heard that you can CF a xxx series with a xxx series Is that true nbsp

A:Wait for the Radeon HD 7xxx series or get the HD Radeon 6950 2GB?

i would get the 6950, thats a very powerful crd as of now with great driver support, even though the 7xxx series is coming out it usually takes like 2 -3 months for decent driver support and longer sometimes with crossfire support in games. as for the crossfire question, u can crossfire cards from the same generation so 5xxx series only crossfires with 5xxxseries and the same for 6xxx, my friend has a 4870x2 and was starting to lag a bit in BC2 so i got him a 4890 and we put those in crossfire, works much better. But yeah i would get the 6950 now and like u said the nice 7xxx series prob won;t be out til after CES in early 2012
 

http://www.techspot.com/community/topics/wait-for-the-radeon-hd-7xxx-series-or-get-the-hd-radeon-6950-2gb.169288/
Relevancy 30.53%

Hello there,
I am thinking about upgrading my current system. I will possibly get the GPU in a about a month or so, and I will buy the CPU and the motherboard and the Cooler possibly during Christmas. Are the FX series gonna be out by Christmas or should I go with the Phenom II x6 1100T BE?

I will be using the:
GA-990FXA-UD3 motherboard
Noctua NH-U9B SE2 CPU cooler

Thanks
 

A:Should I wait for the AMD FX Series?

The FX cpus should be out around september i would think so i would wait if i were you.
 

http://www.techspot.com/community/topics/should-i-wait-for-the-amd-fx-series.168547/
Relevancy 29.24%

AMD have released their new-ish graphics part numbers for systems that pair Llano APU?s with desktop discrete cards.
The standout seems to be HD 6530D or 6550D (APU) + HD 6670 (discrete) = HD 6990D2, which seems to either a huuuuuuge step up in hybrid crossfire, or a guaranteed source of confusion (at the very least).

An already mind-boggling and congested graphics market is about to hit eleven on the one-to-ten scale.

[VR-Zone]
 

A:Absurd naming conventions (part 746 of a neverending series)

(part 746 of a neverending seriesClick to expand...

I'm going to hold you to that
 

http://www.techspot.com/community/topics/absurd-naming-conventions-part-746-of-a-neverending-series.167079/
Relevancy 28.81%

Hi So I m helping my friend build his PC and we ve got everything assembled correctly at least we think we do Only thing that is missing is a dvd-drive which will arrive this week but we figured that it wouldn t be needed to only boot the system into BIOS When we pressed the power button for the first time the system did not boot and the motherboard Asrock p pro gave us a handy quot Dr Debug quot message We had no clue what it meant so we googled it We found a huge thread somewhere with someone saying that if you left only one stick of RAM in in the farthest most slot from the CPU it would boot just fine Only it didn t and instead gave us the debug code and still without visual input We only got error if we put in one or both sticks in the WHITE slots and the white slots only beeps, fans of visual, long no series Continuous triple spinning If we put any ram in any blue slot Continuous series of triple long beeps, no visual, fans spinning We just got the error again We tried removing the ram but that just gave us the missing ram POST triple beep code In short Dual-channeled RAM in the blue slots Dr Debug code Single stick of RAM in any blue slot Same story Single or both sticks in any or both white slots Dr Debug code No RAM Regular no RAM triple error beeps We have no idea what to do next and would appreciate some help Marty nbsp

A:Continuous series of triple long beeps, no visual, fans spinning

How certain are you that the RAM is compatible with the motherboard? What brand and model RAM are you using?
 

http://www.techspot.com/community/topics/continuous-series-of-triple-long-beeps-no-visual-fans-spinning.167045/
Relevancy 29.24%

I have tried everything to get my Laptop ( win vista ) to communicate with my Lexmark printer. All my network connection and sharing seem to be in order. The only 'unconnected' thing I see is my Local Area Connection is unplugged. But, I am running on a wireless connection and my router along with my key in is perfectly fine...I think. The error message reads; Unable to connect with printer/computer...and tells me to check my ports, wires, and firewall. Check, check and check! I really wish I was more savvy when it comes to these sorts of things. I would truly appreciate any help I can get. I am trying to print my resume for 3 upcoming interviews.
 

A:Lexmark 2600 series will not print; any relation to my LAN being unplugged?

hmm; story goes like this;
If the printer is directly attached to another system, then Print/File Sharing will control access to the printer.

If the printer is directly attached to the router, then the device is a 'network device' and it is an issue with networking.
Your WiFi connectin to that router SHOULD be sufficient for access to all network devices (assuming all systems have the same subnet) and any Print/File Shares(assuming all systems are on the same WorkGroup Name...).
 

http://www.techspot.com/community/topics/lexmark-2600-series-will-not-print-any-relation-to-my-lan-being-unplugged.164906/
Relevancy 14.62%

Hello guys......I need your help....I have sony vaio vgn-fs515b and after installing windows 7 i was updating its bios......!!!!

Everything was working fine but in between a blue screen came. It said that your system is shutting down due to some problem and at the end it said:

"Dumping physical memory".

When i restarted my laptop all the light were on but nothing came on screen. I don't know what to do.......Please help me........!!!!

I know this happened because of incomplete upgradation of bios but what should i do not?
 

A:Sony Vaio VGN-FS515b doesn't start after BSOD

The motherboards bios is corrupt. You may be able to correct this if you can pull the CMOS battery and reconnect it. Otherwise the motherboard will have to be replaced
 

http://www.techspot.com/community/topics/sony-vaio-vgn-fs515b-doesnt-start-after-bsod.162562/
Relevancy 28.81%

Okay so I'm not technologically savvy but I'm guessing to make most of the games that I download to actually run, I need a better graphics card?

Whenever I play games with decent to good graphics, my system just won't function right. They lag until my computer freezes and stuff. So I just wanna know what I can do to actually play games.

Manufacturer: Hewlett-Packard
Model: HP Pavilion dv6700 Notebook PC
Rating: 3.5
Processor: Intel (R) Core(TM)2 Duo CPU T5450 @ 1.66GHz 1.67GHz
Memory RAM: 2.00 GB
System Type: 32-bit operating system
Windows Vista Home Premium

I'm not sure what other info I would need to show you guys
I'm willing to spend around 150 or less dollars on stuff I would need to make this computer run better for games

oh my power supply:
Its a replacement AC adapter
Input: AC100-240V 1.2A 50/60Hz
Output: 18.5V 3.5A

Thanks in advance
 

A:HP - Compaq Pavilion dv6700t Series Laptop/Notebook what i need for better gaming?

Up the system memory to 4GB and upgrade Vista 32-bit to Windows 7 64-bit
 

http://www.techspot.com/community/topics/hp-compaq-pavilion-dv6700t-series-laptop-notebook-what-i-need-for-better-gaming.158834/
Relevancy 14.62%

On one rig I got GTS mb and it works flawlesslly However on another machine I got GTS Not 'oh really. so you GTS it crashes, BSOD, Gainward 250 name freezes... great'? gb which Gainward GTS 250 'oh so great'? Not really. BSOD, crashes, freezes... you name it earned the quot Piece Gainward GTS 250 'oh so great'? Not really. BSOD, crashes, freezes... you name it of sh t quot sticker The issues are usual for the gb model blue Gainward GTS 250 'oh so great'? Not really. BSOD, crashes, freezes... you name it screen restart games freeze crash audio loops inifinitely strange psychodelic colorful lines swarm the monitor cubes of various colors do the same And yes it happens in many games and to many people at least according to what I ve found browsing forums As with other people in my case too the issues happen with Bad Company Assassin s creed GTA etc It appears that the problem is with the nV drivers I ve found somewhere that installing a much older version of nVidia graphic drivers solves the issue but I d rather search for help on what to I ve updated BIOS Chipset Audio Lan DirectX nVidia GPU driver is Event Source nv Event ID Minidump files are bellow The error in the Event Viewer appeared on July th EDIT Forgot to mention tha powa is Thermaltek w Forward thanks Kreinzer nbsp

A:Gainward GTS 250 'oh so great'? Not really. BSOD, crashes, freezes... you name it

If its the 1gb model, just use a 512, you get like .01% less performance. And you could just update to the latest drivers, maybe Nvidia has since fixed the issues.
 

http://www.techspot.com/community/topics/gainward-gts-250-oh-so-great-not-really-bsod-crashes-freezes-you-name-it.150050/
Relevancy 29.24%

Just curious if anyone has tried mixing the FireMV series with the consumer-side 4000 series, or any modern consumer series from the 3000's to 6000's.

I may need to do this for a workstation environment where only my primary monitors are handling video and such, and I have a couple of 2-D business apps being displayed on the x1 FireMV 2260 card.

Anyone worked with this?

Thanks for any help.
 

A:Can 4670 series and FireMV 2260 co-exist in same Win 7 64-bit system?

you could probably install both, but you would most-likely need to leave one disabled at a time to eliminate driver conflicts and connect the display to the corresponding card.
 

http://www.techspot.com/community/topics/can-4670-series-and-firemv-2260-co-exist-in-same-win-7-64-bit-system.156731/
Relevancy 28.81%

Hello all I recently picked up a Gateway E which has the slim case I know its old but it was free I did purchase a new HDD for it as well as a DVD-burner Other than that it already had GB of memory and a slim MicroATX Gateway solutions for a Cooling Series - case E GHz M Pentium processor I would really like to use it but it is VERY loud I don t see how someone could work with Cooling solutions for a MicroATX slim case - Gateway E Series it on their desk annoys the Cooling solutions for a MicroATX slim case - Gateway E Series heck out of me I removed the heat sink cleaned off the old grease and blew out all the dust Cooling solutions for a MicroATX slim case - Gateway E Series and reinstalled with new grease This seemed to help a little but not very much At idle the processor temp hovers around C is that normal for this processor The fan speed depends on the case temperature or processor temp so when it gets warm the fan is really turning up to rpm I saw Its not really the fan itself that is making noise but its the air flowing through the case fan that makes it sound like a jet engine Are there any suggestions I really don t want to put any more money into it but I was thinking about just getting a different case This would require me to buy a new PSU and heatsink fan also Having the slim case is not a big deal to me Thanks nbsp

A:Cooling solutions for a MicroATX slim case - Gateway E Series

No, 60C at idle isn't normal. You were on the right track with changing the case. Most of my CPUs run in the neighborhood of 35 to 40C at idle. (The exception is my Prescott P-4 in an Emachines T-5026, which ATM, is 53C under light load). I haven't seen 60c since the last 100 degree day in my non air conditioned house

I'm curious about the CPU, you've included everything except the actual part number.

You should also investigate to verify that your motherboard is an actual mATX form factor, so that it would mount correctly in a standard case.

One quick question, were the temps that high before you remounted the HSF?
 

http://www.techspot.com/community/topics/cooling-solutions-for-a-microatx-slim-case-gateway-e-series.156770/
Relevancy 29.24%

Last night I powered off my laptop, I got into work and powered it on, and to my disliking I discovered that it would turn on, the lit wifi buttons and volume controls would turn on, but the pc would not boot up. To add to the mystery of this the num lock and caps lock lights keep flashing. Anyone have any ideas as to what is wrong with my laptop?

Thanks!

-Stensland
 

A:HP Pavilion dv4 - 1428dx series laptop, powers on but won't boot

problem resolved, my CPU went bad.
 

http://www.techspot.com/community/topics/hp-pavilion-dv4-1428dx-series-laptop-powers-on-but-wont-boot.156671/
Relevancy 28.81%

For a while now, I've been curious to know what the differences are in the Western Digital Caviar Series.
So far as I know, Black is high performance, Green is eco-friendly and slow, but I'm not sure what the Blue series has to offer, other than a lower price tag.
Can anyone clearify what the techinical differences are between Black and Blue? For high performace reasons, I bought the Black series for my tower, but what would I have been missing out on had I gone for the Blue series?

Thanks in advance.
 

A:Western Digital hard drives: The differences between Black and Blue Series

In theory, the Black is supposed to be the faster drive. In actuality, there isn't much between them. Speed rather depends on platter size and cache - The Black drives are either 32 or 64Mb cache, while the Blue drives top out at 32Mb.
Black drives carry a five year warranty, while Blue drives are three years which is probably of more significance.
 

http://www.techspot.com/community/topics/western-digital-hard-drives-the-differences-between-black-and-blue-series.155690/
Relevancy 14.19%

Hello For the past two weeks my laptop has been beeping It doesn t beep when I first turn the computer on Once I m to the desktop it starts Vista Studio Dell 64 continuous a BSOD with beep and 1536 has to beep and it s VERY inconsistent It may beep every five minutes or every minutes Sometimes it beeps once and other times its beeped two Dell Studio 1536 with Vista 64 has a continuous beep and BSOD or three times fast And occasionally I get the BSOD saying something about quot dumping my physical memory quot On top of that when I load the computer I get an error saying that my Catalyst Control Centre is not working I just assumed all these things were connected A few months ago my hard drive died so I installed a new one I haven t had any issues until the issues I listed above all of which start just a few weeks ago Unfortunately my warranty has expired so Dell s support hasn t been much help So does this sound like the hard drive I installed is creating the issues Any advice is very helpful nbsp

A:Dell Studio 1536 with Vista 64 has a continuous beep and BSOD

Have you checked for crud in your keyboard... any cause for a sticking key, sticking space bar, etc.

Don't see how the hard drive could cause the problem.

Have you looked at all the Dell Beep Codes... They are posted elsewhere on this TechSpot forum... that could give you a starting point.
 

http://www.techspot.com/community/topics/dell-studio-1536-with-vista-64-has-a-continuous-beep-and-bsod.154876/
Relevancy 29.67%

I've been looking into purchasing a new Nvidia GPU that supports DX11.

I have an EVGA motherboard, however, the GPU does not have to be from that subsidiary company. I was looking between the 460 and the 470, and couldnt decide whether or not the extra hundred bucks for the 470 would be worth it or not. I will not be using 3D vision, so count that out.

I didn't want to get the 480 since thats around 500 bucks.

What are your opinions? I will be playing games such as Crysis 2 when that comes out, Battlefield BC2, Medal of Honor, Dirt 2, Metro 2033, Mafia II, etc.

My system specs are as follows:
EVGA P55V 120-LF-E651-TR Intel chipset motherboard
Intel i7-860 Quad CPU @ 2.8ghz
OCZ Gold 4GB 240-Pin DDR3 1333mz PC3 10666 (OCZ3G1333LV4G63581470)
as of now i have the EVGA nvidia ge-force 9800 gtx GPU
and my PSU is an LSP Ultra 750w ATX.
 

A:I don't know which graphics card to purchase (Nvidia 400 series)

460 is far more useful.
 

http://www.techspot.com/community/topics/i-dont-know-which-graphics-card-to-purchase-nvidia-400-series.154250/
Relevancy 29.67%

I'm no computer genius, but I knew that having unused programmes on my laptop can't be helping my running speed etc, so in a bid to be quicker I decided to have a clean up.
I went into my add/remove programmes and got rid of a few things...

- MSN messenger
- Adobe Photoshop
- And a few other things I deemed unnecessary.

After that I had no sound. I tired a system restore, nothing, and I've been on the acer website and downloaded the audio driver, still nothing.
I'm running XP, as I tried vista and my laptop didn't take to kindly to this upgrade.

So any help would be very much appreciated. I'm not a major rush, so if it take a week or so of process of elimination I honestly don't mind, its just terrible sat with a silent laptop.

Thanks a lot, Eleanor.
 

A:No sound on Acer Aspire 5100 series

No sound?

Are you sure you installed the correct audio driver ?
I use, a free program from 'Drivereasy.com' It will scan yout PC and get the right drivers for you. But its a good move to uninstall the old one in 'Device Manager' first
Any chance you have just muted the speakers ? ( left click on the speaker in the taskbar and push the marker up to about 15).
 

http://www.techspot.com/community/topics/no-sound-on-acer-aspire-5100-series.153250/
Relevancy 25.8%

I'm trying to decide between two different Acer Aspire Notebooks.
One has:
2.20 GHz AMD V Series V120 single-core processor with 512 KB L2 cache and 1066 MHz front-side bus
250 GB SATA hard drive (5400 RPM)
3 GB of installed DDR3 RAM (1066 MHz; expandable to 8 GB)
ATI Radeon HD 4250 graphics (with 256 MB of discrete video memory) It provides up to 1919 MB of total shared system memory

The other has:
AMD Athlon II X2 dual-core P320 processor
2.10GHz, 1066MHz Front Side Bus, 1MB L2 Cache
2GB DDR3 system memory
250GB SATA hard drive
ATI Radeon HD 4250 graphics with 256MB of dedicated system memory

Which would be better for simple computing, surfing, and streaming videos?
 

A:AMD v-series single core vs. AMD Athlon dual core

IMO the dual core, but it obviously takes more power, though you don't mention battery life or portability.
 

http://www.techspot.com/community/topics/amd-v-series-single-core-vs-amd-athlon-dual-core.152007/
Relevancy 14.62%

So i decided to fire up my brothers computer that he hasnt used for about 2 years and keep running into the bsod with the error about nvlddmkm.sys for my graphics card, the monitor is also blurred as in the colors are distorted and random colors will blurr to the right or the left of where they should be. I can get it to bootup once i go into safe mode and delete the nvlddmkm.sys but when i try and install the latest driver and reboot the same problem and same error pops up. Any advice on how to fix this error? And I was hoping that by installing the newest driver properly that perhaps the blurry screen will clear up, is that just wishfull thinking or could the blurry screen actually be fixed? The computer is running vista 64 with 4g ram and 750w psu. Thanks for the help guys.
 

A:BSOD video card 8800gtx error: nvlddmkm.sys

as you can imagine nvlddmkm.sys is part of the driver installation so simply deleting it will either cause errors or blue screens. there are a number of things that could be causing this to happen, such as corrupted files, a bad power supply, or even the card itself. the first thing i would advise is to do a clean installation of the display drivers, which requires you to use a piece of software such as Driver Sweeper to completely purge the associated driver files. once this is done, you can restart the computer and proceed to install the drivers normally.

if this fails, you may be looking at corruption in Vista itself or possibly with the motherboard chipset drivers. there's also a slim chance that you need to update DirectX software or frameworks for graphics-based software. if it comes down to having to test the actual hardware, there are limited options. the best way would be to test the card in another computer (preferably one with a different OS) and to test the power supply and RAM if you can. is there any reason in particular that the computer hasn't been used for a couple of years? there's always a possibility that your brother knew to replace something and never did
 

http://www.techspot.com/community/topics/bsod-video-card-8800gtx-error-nvlddmkm-sys.151876/
Relevancy 29.67%

I recently acquired a laptop with no visible brand...anywhere ! The only data is on the bottom and denotes : Ew2
G200N series
which I've been able to decipher as : Quanta Ew2 motherboard sold as either a PC Club or an Optima system.My question is this : does anyone out there have any idea where I can get a replacement keyboard as 4 keys are damaged. I've Googled until my google got swollen, I Lycosed until my lycos was RAW and I finally in an act of desperation I Binged until I was truly sick. Which only took a short time as I'm fully MS intolerant
Any leads will be greatly appreciated..


Optima Ew2 512mb 120gb p4 1.8ghz.
 

http://www.techspot.com/community/topics/optima-g200n-series-laptop.149982/
Relevancy 14.62%

Hello everyone,

I just bought some Hardware to build a new computer from Scratch.

I bought:

1. Asus P5E3 Pro Motherboard (DDR3 RAM DIMMS)
2. PSU Coolmax CUL-750B 750W
3. 2x2GB OCZ OCZ3G10664GK R (DDR3 RAM)
4. VGA Card - ASUS ENGTS250/DI/512MD3
5. Intel Core 2 Quad Q8400 2.66Ghz 1333

I installed Windows 7 x64bit OEM

I am having problems with BSOD (different ones not the same one every time)

I would like to know if its a compatibility Problem with My RAM and Motherboard or could it be something else. I am very bad with Hardware and I just bought parts that I knew could fit in theory.

BIOS is set to default because I don't know how to configure it (Probably thinking why did I buy parts instead of a built computer)

Could you please help?
 

A:Compatible RAM for Asus P5E3 Pro Motherboard (BSOD)

Your RAM isn't on Asus' memory QVL (Qualified Vendors List)-but that isn't to say that it's not supported.
Having your power supply checked might be an option if your graphics card seems to run slow or you are getting fluctuating performance.
Because OCZ memory modules lack what are called embedded XMP profiles, your motherboard will have difficulty assigning a setting for them so you will need to do it manually.
Download Memtest86+ from here http://www.memtest.org/#downiso
***under the Memtest86+ v4.00, select "Download -Pre-compiled bootable iso ", save and unzip if downloading the zip file then burn a BOOTABLE CD using ImgBurn or your usual burning software (Nero etc.).- this program runs at BIOS level
Download MemSet here http://www.softpedia.com/get/System/System-Info/MemSet.shtml
You can also download CPU-Z -it gives a much simplified version of the RAM timings but you can also access chipset and CPU info. download here http://www.cpuid.com/cpuz.php

First order of business would be ascertain whether the RAM modules are not defective.
I presume the RAM in question is OCZ's Gold XTC modules - if they are then you can try to manually select the timings- they should be on a sticker on the side of the RAM, which should be 7-7-7-21 ( CAS (or CL)-tRCD-tRP-tRAS) at 1.5 to 1.6 volts.
IF THIS IS NOT YOUR RAM THEN GO NO FURTHER, If it is then you need to set it in order to test it for stability.
Boot into your BIOS. Select the second tab "A.I.Tweaker"
Set PCIE Frequency to 100 (if not already set)
Set DRAM Frequency to DDR3-1066 (if not already set)
Set DRAM Command rate to 2T (if not already set)
Set DRAM Timing Control to Manual
Note the string of timings following "Pri.Information" on the next line-they should be the same as the settings you are about to input.
Set CAS# Frequency to 7 DRAM Clocks
Set RAS# to CAS# Delay to 7 DRAM Clocks
Set RAS# Precharge to 7 DRAM Clocks
Set RAS# Active time to 21 DRAM Clocks
leave the rest of the timings on Auto for now and move down the page until you get to..
DRAM Voltage ....type in 1.60
Hit F10 to save and exit
**If you can boot into windows then run Memset (NOT the Memtest86+ cd you burned!) and note -or better still get a screen capture of the timings (and include in your next post)-here is an example of one of my old screenshots-take no notice of the values but note that both modules SPD (A and B )values are shown-so expand the window.

** If you cannot load Windows then get back to the BIOS and revert settings by choosing Restore Defaults, F10 to save and exit. The likely cause will be insufficient MCH (Northbridge) voltage.
If Memset shows you the correct values and voltage then you can move on to testing.
Reboot and select CD as your first bootable drive
Insert your Memtest86+ bootable cd into the drive
Hit F10 to save and exit
Memtest86+ will boot automatically once the motherboard POST's. As it's a DOS program it is fairly straightforward -The test actually comprises 8 seperate tests. Once all 8 have run then your RAM has completed a "Pass" -for 4Gb a Pass takes around 20-30 minutes.
Run 7 (minimum) to 12 passes. If the testing shows no errors then stop the test at your leisure.
Return to your BIOS, change the boot order back to Harddrive (I assume)
Take the CD out of the drive
F10 to save and exit -congratulations your RAM is stable. The next step would be to stress test the CPU/RAM fo test for stability- but one thing at a time

If the test throws up errors then note the Number of the test and the error code- the test will continue if the errors are not to great. If the testing serquence stops then stop the test, reboot, change boot order, remove cd and F10.
The RAM could fail from either physical damage it has suffered or the timing (and sub-timings) are unstable. We can look into that if the need arises.
 

http://www.techspot.com/community/topics/compatible-ram-for-asus-p5e3-pro-motherboard-bsod.141038/
Relevancy 28.81%

Corsair Professional Series Gold AX1200 Power Supply will it fit into a tower case raidmax Sagitta
 

http://www.techspot.com/community/topics/corsair-professional-series-gold-ax1200-power-supply.148233/
Relevancy 29.67%

Hi,
i have to re-build a workstation for a returning employee
i took an older PC tower (Dell Precision 350) and plugged the tower in to see if it still works but i heard a serious of long beeps with a number sequences of 5-1-2-3.
i have been trying to research the beep sequence but no luck
if there is anyone who can give me a hand it will be great thanks
 

A:Series of long beeps Dell Precision 350

It's a memory read / write failure.

See here.
 

http://www.techspot.com/community/topics/series-of-long-beeps-dell-precision-350.147311/
Relevancy 29.24%

I purchased what was described as a 'Dell 3588D Motherboard Slot 1 Dimension
XPS-B' motherboard from eBay. It uses Rambus memory sticks, but has 3
memory slots to fill, while every motherboard of that type I have researched only
has 2 memory slots. In addition, most of the Series B desktops I looked into
seem to be limited to 512MB of memory.
Because my motherboard has 3 memory slots, would I be allowed to insert three 256MB memory sticks, giving me a total memory of 768MB? I'm told that you should
not exceed the required limit of memory. Would someone care to comment on my
predicament?

hextek
 

A:Filling a 3rd memory slot of a Dell B Series desktop

Just try it, it'll either work or it won't work.
 

http://www.techspot.com/community/topics/filling-a-3rd-memory-slot-of-a-dell-b-series-desktop.146470/
Relevancy 29.24%

as the title says...

which do you think is better?

thank you for all response
 

A:ATI Radeon HD 4800 Series vs Nvidia GTS 250 512MB 2XDVI

there are a lot of cards in the HD4800 series... you can't compare the whole lot to just one GTS

but to make things easier I'd go with a 4850 or 4870 1GB
 

http://www.techspot.com/community/topics/ati-radeon-hd-4800-series-vs-nvidia-gts-250-512mb-2xdvi.144880/
Relevancy 30.1%

Hello I have a Dell Mini 2.5 I should Series Vertex do with my SATA OCZ What SSD? II with a GB SSD in it I don t save many files on my computer so until recently the GB hard drive was more than enough for my use and I found the speed to be very good I decided to upgrade to a GB SSD but when I purchased it I mistakenly bought a OCZ SATA II GB hard drive rather than the PCI-E compatible drive Obviously an embarassing error on my part but now I need to decide what to do I got a great deal on the GB OCZ drive on tigerdirect com I could return it but after paying the shipping to return the item plus a restocking fee I have done the math and figured I might as well just keep the drive My What should I do with my OCZ Vertex Series 2.5 SATA II SSD? question is what is my best option for getting the most for my money Buy a new or refurbished laptop and use the OCZ drive for that or use the drive for a future use and go ahead and buy the correct SSD for the Dell Mini I would also consider an option to buy a desktop and use the SATA drive for that Appreciate any suggestions anyone might have nbsp

A:What should I do with my OCZ Vertex Series 2.5 SATA II SSD?

Sell the ssd on ebay for the price you paid and buy the correct format of ssd you need. If you plan on getting a desktop soon I'd consider keeping it, but I wouldnt get the desktop just because you have the ssd.
 

http://www.techspot.com/community/topics/what-should-i-do-with-my-ocz-vertex-series-2-5-sata-ii-ssd.144233/
Relevancy 28.81%

Hello everyone wave I m have an old and aging system here is the following specs E P Neo -FR FIR HDD gb ODD Pcolor X Pro gig ram transcend seasonic s II W Cooler master 600W Series Professional Corsair OCZ HX650W ModXStream V.S. Pro Supply Power V I just got OCZ 600W ModXStream Pro Power Supply V.S. Corsair Professional Series HX650W a power color G from a friend its free blush excess from his upgrade OCZ 600W ModXStream Pro Power Supply V.S. Corsair Professional Series HX650W will my computer PSU able to handle the power required for this video card It will be my first attempt in overclocking this old system of mine will be my testing bed Since my aim was to practice and experience overclocking I m planning to get a new PSU because I m afraid of blowing things up My option are OCZ W ModXStream Pro Power Supply and Corsair Professional Series HX W I need advise to which one is better I read each PSU specification I wonder which one is better the multi rail design of OCZ or Single rail of corsair Is wattage of both PSU will be enough if i go on multi GPU X on crossfire in the future Thanks you OCZ 600W ModXStream Pro Power Supply V.S. Corsair Professional Series HX650W rai nbsp

A:OCZ 600W ModXStream Pro Power Supply V.S. Corsair Professional Series HX650W

Corsair is generally considered to be a slightly more reliable brand. I personally would suggest a single 12V rail with high amperage. Do you require a modular PSU? If not, then the Corsair 650TX is cheaper than it's modular counterpart, the 650HX.

I think that for a single PowerColor HD 4850 the Corsair 550VX will be more than sufficient. However, if you're looking to keep the system more "forward compatible" (not future proof because nothing is), the Corsair 650TX should do great. I would think that the 650TX would be the best choice for CrossFire with 2 HD 4850s.
 

http://www.techspot.com/community/topics/ocz-600w-modxstream-pro-power-supply-v-s-corsair-professional-series-hx650w.142729/
Relevancy 29.67%

Could someone give me a link to a motherboard beeper as this board does not come with one?


thank u Nick
 

A:Running a P5 Series ASUS board

How about this one? http://www.cwc-group.com/8ohm.html
 

http://www.techspot.com/community/topics/running-a-p5-series-asus-board.138060/
Relevancy 28.81%

I have the above PC and was hoping to increase the Ram size from 2gig to 4 gig.
I had a fruitless chat with Sony tech support (as usual) and they inform me that 2gig is the max for my machine.
The mobo has 4 ram slots 184pin config and at the moment is carrying 4 x 512m memory sticks type PC3200U and was hoping to fit 4x 1gig type PC3200U sticks. Unfortuately the PC takes for ever to boot with 4 x 1gig sticks in.
Can anyone advise if this machine is at its max of 2gig or can the BIOS be pursuaded to see 4gig?

Hopefully I can workout the new 4 x 1gig sticks config, if not I will have to return them to the supplier. Any help would be greatly appreciated.
 

A:Sony Vaio Desktop series RZ30C Model# PCV-RZ30CG - RAM upgrade?

Hmmm....guess my enquiry does not attract the same attention as game machines and building new computers...did get 63 viewers though but no enlightenment.
 

http://www.techspot.com/community/topics/sony-vaio-desktop-series-rz30c-model-pcv-rz30cg-ram-upgrade.136622/
Relevancy 15.05%

Hello,

I have a Dell Inspiron 8600 laptop. At the moment, I have no OS running, as I am trying to reformat my computer. In doing so, I received the BSOD message: partmgr.sys - Address F87C04AB base at F87BE000.

Do I need a new hard drive?

Any help is greatly appreciated. Thanks in advance.

KJA6
 

A:BSOD message: partmgr.sys

What Windows CD version are you using to boot with and did you set the CD as the first boot device? I could be wrong but maybe you aren't booting correctly.
 

http://www.techspot.com/community/topics/bsod-message-partmgr-sys.137335/
Relevancy 25.37%

I came across this from Guru, In a related link they claim that they have something up their sleeve for the release of the 59xx series. i was wondering given the monstrous length of the these things (13.5") if it might be a triple GPU or something like that?....HMMMM
http://www.guru3d.com/news/radeon---hd-5870-x2-hd-5970-benchmarks-and-images-surcface-/
 

A:ATI has "something up our sleeve" for the 59xx series

Come on man! They hardly can get performance out of two gpus there's no need to go three IMO:haha:

Waiting for nvidia launch... The competition would get really HOT:evil:
 

http://www.techspot.com/community/topics/ati-has-something-up-our-sleeve-for-the-59xx-series.137261/
Relevancy 14.62%

Hey everyone I m back with another problem This time it s in my personal laptop So about weeks ago a friend of mine installed GB RAM into my nv4_disp Help BSOD infinite loop with laptop After a couple of days with the RAM I turned on my laptop and find my screen flashing red Parts of the screen were pixeled red After backing up my files through safe mode I brought the computer to the college tech support They figured Help with nv4_disp infinite loop BSOD it s a driver problem so they updated my video driver Into what I cannot remember The problem randomly appeared and that forced me to format and start fresh So a new problem arose As the title suggested I randomly get the nv disp infinite loop BSOD Sometimes Help with nv4_disp infinite loop BSOD my screen would just freeze and not do anything Sometimes the screen flashes Help with nv4_disp infinite loop BSOD but I can still move my mouse pointer And it hasn t really been too friendly when I open the only two games I have in my computer in an attempt to see how bad the damage is I looked up some solutions online which included uninstalling and reinstalling drivers After a few attempts of that with the update the NVIDIA website provided I rolled back my driver into driver version So here are some things about my computer Model Dell Latitude D System Microsoft Windows XP Professional Service Pack Computer Intel R Core TM Duo CPU t GHz GHz with GB of RAM Driver Details Currently NVIDIA Quadro NVS M Driver Version Personally I wouldn t mind this problem But I have a final project for a class where I need a video presentation and I am using Pinnacle Studio I m not sure if it s just me being retarded and missing a driver to install but I m pretty sure I reinstalled everything after formatting my computer Any help is greatly appreciated If any more information is needed please tell me so I can attempt to provide you with correct information not completely tech savvy for a computer engineering major ironically nbsp

A:Help with nv4_disp infinite loop BSOD

First of all you have to make sure that the 667 memory and the nvidia driver is compatible with your Dell laptops model, and you should use the Nvidia video and chipset driver from Dell and not from the nvidia site. You can up the shared video memory to 256MB maximum
 

http://www.techspot.com/community/topics/help-with-nv4_disp-infinite-loop-bsod.137089/
Relevancy 15.05%

hi.

my system:

gigabyte X48TDQ6 mobo
qx9650cpu
gtx285
2X2gb ocz ddr3 1600mhz

my problem:

i have run my system for about a year with q6600 cpu with no problems with this mobo,memory,graphic card.

yesterday i have changed my cpu to qx9650 with the intel stock cpu fan. when i play games after 20 minutes i get bsod and the system reboot even in regular use on desktop.

the cpu temp in idele is about 27 deg. (not seems beacuse overhit)

on bios everythind on standart/auto (no o.c).

i upgrade my bios revision.

the bsod is "not less or equel" something:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.0.6001.2.1.0.256.1
Locale ID: 1037

Additional information about the problem:
BCCode: a
BCP1: 0000000010000002
BCP2: 000000000000000C
BCP3: 0000000000000000
BCP4: FFFFF800020BCAC1
OS Version: 6_0_6001
Service Pack: 1_0
Product: 256_1


thanx 4 any help.
 

A:Bsod after replacing cpu

look on the box the CPU came in, or run CPU-z and see what the revision is. If it is an E0 you need BIOS F8D beta to run that CPU. At least that is what Gigabyte is showing for that CPU on the GA-X48-DQ6 mobo. I couldn't find a GA-X48-TDQ6 mobo listed on their site. Typo or wrong region possibly? Also check windows updates. There may be something for that CPU, or maybe you need more than SP1 on your OS? Your BSOD screen by the way is referencing a failure to read paged memory.
 

http://www.techspot.com/community/topics/bsod-after-replacing-cpu.134111/
Relevancy 30.53%

Does anybody know anything?

release dates?

etc?

i have looked everywhere, cant find anything.

all i can find is what prices to expect.....
 

A:ATI HD 5000 series

Haven't heard anything... probably because ATI doesn't plan on releasing new GPUs anytime soon.
 

http://www.techspot.com/community/topics/ati-hd-5000-series.133411/
Relevancy 14.62%

I came home from a vacation after summer everything was my and Just computer new installed now processor gets BSOD's 955) (X4 already Just installed new processor (X4 955) and now my computer gets BSOD's set up in my computer except that I had sold Just installed new processor (X4 955) and now my computer gets BSOD's the Phenom X before I left which left my computer well CPU-less When I came back I bought a new Phenom X So I installed the processor and the stock heatsink and fan that came with it No I m not overclocking the CPU No I m not doing anything else out of the ordinary I ve had this processor installed for at least a week now My computer will just randomly get the blue screen of doom or death and just restart I NEED TO KNOW HOW TO FIX THIS PROBLEM I can t take this anymore I downloaded a program called BlueScreenView by NirSoft so that I can view the BSOD error codes etc etc So I can tell you exactly what BSOD happened and at what time I just need to know how to fix it The three BSOD s I ve been getting are DRIVER IRQL NOT LESS OR EQUAL x d KERNEL MODE EXCEPTION NOT HANDLED x e and PAGE FAULT IN NONPAGED AREA x HOW CAN I FIX ANY OF THESE nbsp

A:Just installed new processor (X4 955) and now my computer gets BSOD's

Sounds like a bios update might help. Version 2606 appears to be the latest for Vista if you have 32 bit.
 

http://www.techspot.com/community/topics/just-installed-new-processor-x4-955-and-now-my-computer-gets-bsods.133084/
Relevancy 29.67%

Okay, so my sister's Sony Vaio VGN-NR120E has a damaged keyboard.
I found a place to buy the part (ebay, various other sites, etc. all sell them...) but for the life of me, I cannot figure out how the heck to get the keyboard off of the thing to replace it.

Has anyone replaced a keyboard on a Sony Vaio VGN-NR series before or knows how to do it? I'm fairly confident in my abilities but I want to avoid dismantling parts of the computer I don't need to, so any insight on how it's fastened on there would help.
 

A:Sony Vaio VGN-NR series keyboard replacement

Hi

sony laptops use (like most do) very small clips at the top of the keyboard, usually 3 or 4 of them along with screws from the bottom,, finding which screws is a trial, unlike Dell who mark the screws (k) for keyboard, (p) for palmrest etc etc.

Once you find out which screws they are get a credit card or similar and slide it across the top of the keyboard between the top and the case, you will feel the clips, use another card to gently lift the keyboard at the same time, be careful once done as their is a ribbon cable on a plug that connects to the motherboard, a gentle pull should pull it out if its a molex type, or else it may be a lift up the black bar type and slide the cable out, or slide a little lug on either side up (to the side etc) to remove the cable.
 

http://www.techspot.com/community/topics/sony-vaio-vgn-nr-series-keyboard-replacement.132141/
Relevancy 14.62%

hi i have been getting random bsod when playing games and sometimes watching videos online says video driver stopped responding sometimes bsod sometimes it recovers says to upgrade drivers which i have doesnt help it has done this with every driver i have installed.

vista home premium
asus p5q pro
ati 4780 512
2/2g corsiar dominator
e 8400 @ 3.00
XFI PLATINUM
pc power +cooling 750 w
2/300g vel raptor hd raid o

hers the mini dump please help
 

A:Random bsod video drivers

Your video card may be over heating
 

http://www.techspot.com/community/topics/random-bsod-video-drivers.132166/
Relevancy 29.67%

i have the exact this problem of this guy mentioned before in this forums

topic84540

i have this problem since 4 months around and i dont know how to fix it, i was about to reformat but the answer there says that the problem is not a conflict with the drivers and the system.

anyhelp?
 

A:ATI 9200 series card crash

You need to give us proper information, pc specs,
 

http://www.techspot.com/community/topics/ati-9200-series-card-crash.131136/
Relevancy 29.67%

Hello so im not so good with all the terms but i can get some series Video help card radeon of them so in Video card help radeon series the responses keep it Video card help radeon series to a minimum please I have a radeon series and i was wondering if this card can run any of the half life series at all or decently ive tried it and its failed so far but i might be doing Video card help radeon series something wrong my other option is to upgrade my graphics card to a better one but i only have pci slots i saw a article earlier about gaming with pci slots but i would like some one on one feed back please look at this guys article and tell me which card would be best for half life series team fortress and overlord may or may not be getting this one www techspot com vb topic html please any feed back would be great my specs are compaq presario gb ram radeon series pentium R cpu ghz ghz nbsp

A:Video card help radeon series

will my computer be able to run something with the requirments of Pentium 4 3.0Ghz/Athlon 64bit 3000+
 

http://www.techspot.com/community/topics/video-card-help-radeon-series.131360/
Relevancy 29.24%

Hi all, I have a thinkpad 1411 i series from 1998. A workhorse. I always use the machine plugged in. Original battery.

Was getting a battery bad/drive OK message, then I would hit enter and it would boot up.

Now will not boot at all.

Can't it work with just the plug or do I have to buy another battery?

I just use it for a word processor and family photos now. but I like it for that. I have a dell dual core /quad for the web.

Shouldn't it work with just the plug, I don't get it?

Thanks for advice
 

A:IBM Thinkpad 1411 i series battery bad message won't boot

Not all notebooks will work without a battery. I have a Toshiba A70, and had issues a while back which I thought was the battery, so I tried running without it. Try taking the battery out and see if it starts. Keep in mind that it's a good idea to cycle batteries in notebooks even if they are always plugged in, they should be discharged maybe once a month or so.
Your particular error seems to be coming from the CMOS, maybe you can look at that, considering its been 11 years, maybe its due for a change.
 

http://www.techspot.com/community/topics/ibm-thinkpad-1411-i-series-battery-bad-message-wont-boot.131365/
Relevancy 29.67%

I have a radeon 9000 series graphics card, i have it working and everything but when i try to play half life 2:episode 2 it pops up with a "need to update drivers" message but when i go to the ati site none of the drivers work for me coming up with "missing inf file" "connect a vga cable"

If you could and if anyone had this problem and resolved it please send me the link with the update
Computer Specs are
pentium 4 cpu 2.93ghz 2.93ghz
2.49 of ram
radeon 9000 graphics card (which i am able to use)
windows XP
 

A:Need to update radeon 9000 series

What Operating System are you running and it is fully updated using Windows Update?
 

http://www.techspot.com/community/topics/need-to-update-radeon-9000-series.131024/
Relevancy 15.05%

Can t seem to find any solutions to this ongoing problem Currently Kernel_Mode_Exception_Not_Handled_M BSOD, using WinDbg to debug issue however I am not having much luck Here are the two latest BSOD Microsoft R Windows Debugger Version X Loading Dump File C WINDOWS Minidump Mini - dmp Mini Kernel Dump File BSOD, Kernel_Mode_Exception_Not_Handled_M Only registers and stack trace are available Symbol search path is msdl Executable search path is Windows Server Kernel Version Service Pack MP procs Free x compatible Product LanManNt suite TerminalServer SingleUserTS Built by srv sp gdr - Machine Name Kernel base x PsLoadedModuleList x af c Debug session time Wed Jul GMT- System Uptime days Loading Kernel Symbols Loading User Symbols Loading unloaded module list Unable to load image navex sys Win error n WARNING Unable to verify timestamp for navex sys ERROR Module load completed but symbols could not be loaded for navex sys Bugcheck Analysis Use analyze -v to get detailed debugging information BugCheck E c b d ba b Probably caused by navex sys navex f ba Followup MachineOwner --------- kd gt analyze -v Bugcheck Analysis KERNEL MODE EXCEPTION NOT HANDLED M e This is a very common bugcheck Usually the exception address pinpoints the driver function that caused the problem Always note this address as well as the link date of the driver image that contains this address Some common problems are exception code x This means a hard coded breakpoint or assertion was hit but this system was booted NODEBUG This is not supposed to happen as developers should never have hardcoded breakpoints in retail code but If this happens make sure a debugger gets connected and the system is booted DEBUG This will let us see why this breakpoint is happening Arguments Arg c The exception code that was not handled Arg b d ba The address that the exception occurred at Arg b Trap Frame Arg Debugging Details ------------------ EXCEPTION CODE NTSTATUS xc - The instruction at quot x lx quot referenced memory at quot x lx quot The memory could not be quot s quot FAULTING IP navex f ba b d ba ffb c a push dword ptr ecx AC h TRAP FRAME b -- trap xffffffffb ErrCode eax ebx e ecx edx esi e caa edi e e a eip b d ba esp b ebp b iopl nv up ei pl nz ac po cy cs ss ds es fs gs efl navex x f ba b d ba ffb c a push dword ptr ecx AC h ds ac Resetting default scope CUSTOMER CRASH COUNT DEFAULT BUCKET ID DRIVER FAULT SERVER MINIDUMP BUGCHECK STR x E PROCESS NAME vbda exe CURRENT IRQL LAST CONTROL TRANSFER from b d e to b d ba STACK TEXT WARNING Stack unwind information not available Following frames may be wrong b b d e e d e e e a navex x f ba b bc b d b e e f e navex x e e b d b a c e d ff b ac navex x e b b a e e f f e dd acd b ac navex x a c b b b a e e e d c e dd acd navex x ce b c b d navex x d e b c e e d c nt ExFreePoolWithTag x a STACK COMMAND kb FOLLOWUP IP navex f ba b d ba ffb c a push dword ptr ecx AC h SYMBOL STACK INDEX SYMBOL NAME navex f ba FOLLOWUP NAME MachineOwner MODULE NAME navex IMAGE NAME navex sys DEBUG FLR IMAGE TIMESTAMP b c FAILURE BUCKET ID x E navex f ba BUCKET ID x E navex f ba Followup MachineOwner --------- Microsoft R Windows Debugger Version X Copyright c Microsoft Corporation All rights reserved Loading Dump File C WINDOWS Minidump Mini - dmp Mini Kernel Dump File Only registers and stack trace are available Symbol search path is msdl Executable search path is Windows Server Kernel Version Service Pack MP procs Free x compatible Product LanManNt suite TerminalServer SingleUserTS Built by srv sp gdr - Machine Name Kernel base x PsLoadedModuleList x af c Debug session time Wed Jul GMT- System Uptime days Loading Kernel Symbols Loading User Symbols Loading unloaded module list Bugcheck Analysis Use analyze -v to get detailed debugging information BugCheck E c b ef a b a a c Probably caused by hardware afd AfdTransmitFile a Followup MachineOwner --------- kd gt analyze -v Bugcheck Analysis KERNEL MODE EXCEPTION NOT HANDLED M e This is a very com... Read more

A:BSOD, Kernel_Mode_Exception_Not_Handled_M

you might want to post this in operating system and software.
i would suggest reinstalling windows myself.
 

http://www.techspot.com/community/topics/bsod-kernel_mode_exception_not_handled_m.130798/
Relevancy 15.05%

Just got a gift from a friend. A Panasonic CF48E. Put a new HD in it, Installed WIN XP pro, and was happy... NO sound.. Looking at the Control panell, looks like the Multimedia Audio Controller has a ( ! ) in the yellow circle. Downloaded what seems to be the correct drivers for it, ir starts to install but mid installation I get the Blue SOD, that says portcls.sys, and it shuts down, and restarts the laptop real fast ( no time to read what the blue screen says..
Anyone see that problem before?
Any solutions? I read all kinds of suggestions, but none work.
Help please.
 

A:Panasonic CF-48 E Portcls.sys BSOD

Try here:
http://www.panasonic.com/business/toughbook/toughbook-products.asp?cm_mmc=PCSC_Toughbook-_-iProspect_PPC%20-_-Google-_-panasonic%20toughbook
 

http://www.techspot.com/community/topics/panasonic-cf-48-e-portcls-sys-bsod.130384/
Relevancy 28.81%

Ok, this is my first post here, just made an account to post this.

I want to be able to play Second Life and I need a better graphics card. Here is the system requirements:
secondlife.com/support/sysreqs.php
(would have the link, but its my first post)

I am on an XP, and I would like to get a compatible card from the recommended list.


I have looked at some other posts, and I am really confused. I understand the basics of computers, but I have no idea about this. I think I may need to upgrade my power supply? I have no idea what to post here, but I will try.
Here is what I have:
Intel
Pentium 4 CPU 2.80 GHz
2.79 GHz, 1.99 GB of RAM
Physical Address Extension


This is from dxdiag:
Intel 82519G/GV/910GL Express Chipset Family



My driver is already updated, and it still doesn't work.
 

A:Dell Dimension E310 Series Video Card Upgrade

Ok you said upgrade your video card?......so what video card do you have in there now?
Also you will have to either take the panel off your computer and get the brand and watts of your PSU (power supply) or look it up. So far your CPU and RAM look good.
Just get the other info and i will be able to help further
 

http://www.techspot.com/community/topics/dell-dimension-e310-series-video-card-upgrade.128523/
Relevancy 15.05%

i was redirected here from the BSOD help as it may be a hardware problem I have a Gateway laptop running Windows XP media center edition with SP and whenever i try logging in it either boots me before loading up or within the first - seconds i have tried running in the last good configuration and safe mode but they dont work it just shuts off without a blue screen the screen has had trouble in the past and doesnt work well now so it is plugged into a computer monitor could that be the reason its having problems the thing is it has used this monitor for a good months at least before having problems I lent the laptop to my girlfriend so she could have a computer in her room with internet then it started doing this there is nothing of major importance on this computer so i really just wanna do a full system restore or repair but i dont know how The system wont stay on long enough and i dont have my cd key either i did just have one successful log in with an error report i am doing the list of things in and log hardly can BSOD microsoft says to do currently looking for updated drivers EDIT BSOD d then got back in and performed a BSOD and can hardly log in quick scan found nothing doing a full scan in hopes it finds something helpful nbsp

A:BSOD and can hardly log in

Memory or failing hard drive... You may have to take it in for service. What kind of scan, memory?
 

http://www.techspot.com/community/topics/bsod-and-can-hardly-log-in.129603/
Relevancy 15.05%

Hi,
Recently i suffer from BSOD on a daily basis. I can't put any finger on the reason, cause i see no rule. I suspect Outlook 2003 or AVG.
I have attached the the dump file. I dont know how to read it.
Please advise.
regards,
Tany
 

A:BSOD on XP SP3

What hardware or software did you install just prior to getting bsods?

Your current minidump shows "Stop 0xBE"

Which indicates that a driver attempted to write to read-only memory.

Possible Resolutions:




? A Stop 0xBE message might occur after installing a faulty device driver, system service, or firmware. If a Stop message lists a driver by name, disable, remove, or roll back the driver to correct the problem. If disabling or removing drivers resolves the issues, contact the manufacturer about a possible update. Using updated software is especially important for multimedia applications, antivirus scanners, DVD playback, and CD mastering tools.Click to expand...

Since you suspect AVG and since others have reported issues with AVG8, you may wish to try (Free products, available here)
Avira ... http://www.techspot.com/downloads/41-antivir-personal-edition.html
or Avast ... http://www.techspot.com/downloads/223-avast-home-edition.html

Because of reported security issues, I do not use Outlook, so others will need to assist you there.
 

http://www.techspot.com/community/topics/bsod-on-xp-sp3.129345/
Relevancy 15.05%

Hello... I'm new here.

I was using my laptop and there were updates. So I installed them before shutting down... but after I checked up on it again, there was a BSOD. The error was Stop Error 000000050: PAGE_FAULT_IN_NONPAGED_AREA. Somebody help me please. My laptop is a Toshiba Satellite A215-S4747.

Thank you
 

A:Toshiba Laptop BSOD

Re: 0x50 errors



Defective memory (including main memory, L2 RAM cache, video RAM) or incompatible software (including remote control and antivirus software) might cause Stop 0x50 messages.

Possible Resolutions:

? If you added new hardware recently, remove and replace the hardware to determine if it is causing or contributing to the problem. Run diagnostics software supplied by the hardware manufacturer to determine if the component has failed.

? Stop 0x50 messages can also occur after installing faulty drivers or system services. If the file name is listed, you need to disable, remove, or roll back that driver. If not, disable the recently installed service or application to determine if this resolves the error. If this does not resolve the problem, contact the hardware manufacturer for updates. Using updated drivers and software is especially important for network interface cards, video adapters, backup programs, multimedia applications, antivirus scanners, and CD mastering tools. If an updated driver is not available, attempt to use a driver from a similar device in the same family. For example, if printing to a Model 1100C printer causes Stop 0x50 errors, using a printer driver meant for a Model 1100A or Model 1000 might temporarily resolve the problem.Click to expand...

Can you boot to safe mode? (f8 after power up - and after bios password if enabled).
From safe mode, right click on my computer, click on properties, click on "hardware" tab, click on "device manager" button.
Check for yellow or red flags... roll back drivers these drivers if possible.

I would like for you to check for memory errors as well...
Use Memtest... See this tutorial... http://www.techspot.com/vb/topic62524.html

Since these errors can have many causes...
I would like for you also to go to the Virus and Malware board, and follow carefully the 8 steps.
See here http://www.techspot.com/vb/topic58138.html

Until we can get a stable system for you, you may need to download the tools to another computer, and then burn them to a cd for use on the Toshiba.
 

http://www.techspot.com/community/topics/toshiba-laptop-bsod.129164/
Relevancy 14.62%

Hi

When I try to use winrar to unrar a compressed file or something like that, it appears de blue screen and I hear the sound of the hard disk powering down I think (it's the same noise that the hard drive makes when I turn off my computer)

This problem started few days ago when I installed Jdownloader but I don't thing that the problem is related to it.

History: a year ago I got 2 hard drives in raid 1 mode and they failed but the disks are ok. I think that failed the motherboard's raid controller or disk controller. I've got the same mother with a diferent hard disk for a year ago.

Please help!

thanks
August
 

A:Bsod, Kernel Stack Input Error

Sounds like a memory problem... Test the system memory
 

http://www.techspot.com/community/topics/bsod-kernel-stack-input-error.129257/
Relevancy 30.1%

hi guys
today i have heard that the nvidia gtx and 9 series have a cooling and temp's problem and he(the seller) told me that these cards performance are great but they have a temp problem,and the reviews or nvidia wont write this problem,and that nvidia produced this card before it's time because ati has produced the hd 4890 with it's great performance ,he told me to ask the users of these cards,and i want to buy a new gtx 295 graphic card
so guys who use nvidia gtx or 9 series,is that right?
please post your comments and thoughts about these products
and thank you
 

A:Nvidia gtx and 9 series problem

lol, I own one, no temp issues, it operates at about 55-65C with the stock cooler, make sure you download something like evga precision and you can control the fan speed yourself. I'm currently using a dangerden water block for it to keep temps down for my over clocks.
 

http://www.techspot.com/community/topics/nvidia-gtx-and-9-series-problem.129241/
Relevancy 14.62%

i am having a little bit of an inconvenience with this pesky bsod error message it reads hardware malfunction call your hardware vendor for support NMI Parity check memory parity error the system has halted i have been skimming through forum threads from around of people having a similar problem but they all had dells and it occurred mostly in laptops i have got a heavily modded hp d small form factor desktop in fact the malfunction error hardware Bsod only thing i have that has anything to do with dell is my two monitors and a little CAT wired network Bsod hardware malfunction error pci adapter i installed a gig of ddr Kingston ram a agp video card and that dell net adapter all at the same time the problem started happening like a couple of weeks after that the old thread that i found is pages long and i haven t had time to read the whole thing i think it is that netcard but i dont want to open up my case take it out and the problem still occur so i wanted to know if anyone knew whether it is or isn t the problem b c like i said i upgraded other stuff at the same time thanks zach nbsp

A:Bsod hardware malfunction error

The parity check error is a likely pointer to defective (or poorly seated) memory,
Please run memtest... See this tutorial... http://www.techspot.com/vb/topic62524.html

Note that memtest should be allowed to run a minimum of 7 full passes. Each pass has eight tests of inclreasing complexity. This means that it will run a while. Allowing it to run overnight should give it enough time. Since it runs from its own environment, windows bsod will not be a problem. Any errors means you have one or more defective memory modules. If you find errors, you may wish to run Memtest on each module. If you bought the memory as a kit, you will likely need to RMA both modules.

Please also include some of your minidumps as attachments to your next post.
The name and model of your MB would also help. Some MB's are notoriously touchy about the ram that you use. If your Kingston ram is not on the MB maker's list for your board, this may be the problem.
 

http://www.techspot.com/community/topics/bsod-hardware-malfunction-error.129155/
Relevancy 15.05%

Hi,

I've been playing EVE online on my HP510 fine for several months when all of a sudden I am getting a blue screen with reference to Page in non paged area - further down the screen it mentions ialmdev5.dll. The machine uses a Mobile Intel 915GM/GMS 910GML Express Chipset for it's graphics and has worked fine the last couple of months.

I have downloaded the latest drivers from the HP site site, and have run 3x different memory test programmes - none of which found an error since I understand there can be RAM issues which cause this.

I am a little confused what could suddenly stp the thig from working - there was no patch and I have not installed new software,

I'm at a bit of a loss what to do now - any ideas or help?
 

A:BSOD - possible graphics problem?

ialmdev5.dll is an intel chipset driver. Go to HP's support site under your computers model and download and install the Intel Chipset drivers
 

http://www.techspot.com/community/topics/bsod-possible-graphics-problem.128495/
Relevancy 15.05%

Hey people Now i know theres probably alot of threads on this topic already but this problem is a Just sick bsod problem - this ATI of about little different to what people have been describing I just helped my friend build his computer and i recommended all the pieces and put it all together installed everything etc Anyway about - minutes into a game it ll crash to the bsod Here s the interesting bit I used to have an ati card myself and it would do the exact same thing with every game i played My friends on the other hand so far its only doing it on NFS - Undercover and the latest Prince of Persia My hypothesis is the game loads into the ram but somehow or another the ati drivers do something crazy and stop unused data from being discarded Just about sick of this problem - ATI bsod out of the ram so it fills up the ram Just about sick of this problem - ATI bsod then the pagefile then crashes to bsod Thats my theory If anyone has any idea of what Just about sick of this problem - ATI bsod the hell is going on here it ll be greatly appreciated Here s his pc s specs case - nzxt tempest psu - antec truepower quattro w mobo - asus m a deluxe cpu - amd phenom am ghz ram - corsair ddr x gb mhz model no AL-TWIN X - C DF graphics - gigabyte hd hhd - seagate barracuda tb os - windows vista ultimate x sp I came to that hypothesis because when i had my ati card depending on the amount of ram the game used greatly factored how long it would take to crash to bsod I ve been looking around and so far i ve found these theories of how to fix it ati drivers werent tested properly on -bit vista the latest CCC drivers screw up big-time its dodgy memory There s alot more i could list but they re just a load of crap i m pretty damn sure its not the memory since we played crysis warhead on it for hours straight It could be the CCC but i dont think it is if it was i think it d be more of a driver problem then anything else which means uninstalling CCC won t make a difference I m really thinking it s a vista -bit problem but i cant find out until he brings the comptuer back over to my house So does anyone think they know whats going on here I m not a junior in computer repair i ve built and repaired plenty of laptops and computers to know what i m doing but i ve never needed to use a debug program so i might need some insight into how to do that if anyone needs a debug report or whatever Again thanks nbsp

A:Just about sick of this problem - ATI bsod

Try updating the ASUS motherboards bios
 

http://www.techspot.com/community/topics/just-about-sick-of-this-problem-ati-bsod.128178/
Relevancy 14.62%

After fitting 8gb of crucial ram in my pc, i went back to crucials website to try out the memory scanner tool just out of curiosity. As soon as i try to run it it gives me an instant BSOD!! This happens on my brothers pc also. He has 8gb of diffrent brand ram. Any one else have/had this problem?

Its not really a big issue, im just curious.
 

A:Crucial memory scanner BSOD

Does this really matter? If everthing else works ok...
 

http://www.techspot.com/community/topics/crucial-memory-scanner-bsod.128140/
Relevancy 15.05%

hey guys...

i hope you guys can help me....i'm really having a hard time figuring out why pc goes blue screen of death whenever i play with garena(gg client)....when i had vista...it always crashes(bsod) even on 1v1!!!!i switched to xp and it still crashes 6 out of 10 times.....but when i play on my own...it doesnt bsod... the worst thing it can do is shut the program....only happens rarely.....

i have a laptop computer with:

T2050 1.6 ghz
2gb ram
intel gma 950

i hope you guys can help me with my problem.....thanks!!!
 

A:BSOD on warcraft dota?

The laptop may be overheating...
 

http://www.techspot.com/community/topics/bsod-on-warcraft-dota.128090/
Relevancy 15.05%

Wondering if anyone can help figure out why I'm getting this error.
Stop 0x0000008E(0x00000092,0xA65CDFEC,0xBA4D3BC8,0x00000000)
CHDAU32.sys Address A65CDFEC base at A65BD000
DATE STAMP 4851C198
My laptop is a Lenovo Thinkpad T400 model 2765T6U. I purchased it in January of this year and I'm upset that there is already a major error.

Other specs: Intel Core 2 Duo P8400 @2.26Ghz with Intel Turbo Memory (2GB)
Cache Memory L2 Cache 3MB
Ram: 2GB DDR3 SDRAM 1066mhz PC2-8500
HD 160GB 7200 rpm
Graphics Card: ATI Mobility Radeon HD3470
OS: XP Pro Service Pack 3.

Since it was just purchased there have been no hardware changes. Thanks for the help.
 

A:Help with BSOD

Read: All about Minidumps and diagnosing them

Please check: Start-> Run-> C:\Windows\Minidump
For any Minidumps to Attach
 

http://www.techspot.com/community/topics/help-with-bsod.127861/
Relevancy 29.67%

I would like to upgrade the CPU on an older model Compaq Presario 5000/K series desktop. Currently installed is a 900Mhz Duron. I'm not sure what the model MB is, but presume it to be a micro ATX of some description. Would it be possible to "pop" in an Athlon XP 2.0 and if that is possible would the BIOS need upgrading as well?
Cheers.
 

A:Compaq 5000 series CPU compatability

Can you be a little more specific on the Compaq part number or provide a number like 5002US? A 900MHz Duron, but what about the motherboard bus speed? I saw a listing for the 5002US model with only a 200MHz bus speed... This could be your limiting factor in deciding what CPU would work for you
 

http://www.techspot.com/community/topics/compaq-5000-series-cpu-compatability.127716/
Relevancy 15.05%

Got BSOD with xcfe.sys address 93606F02 base at 93605000 datestamp 4899d276.

I am currently not able to get computer to post at all no other issues before hand

7750 Kuma
780g FullHD ASROCK
4670 Radeon
4GB (2X2GB) OCZ Ram
Vista Ultimate
 

A:Xcfe.sys BSOD

No idea what that is. Is the CPU fan running and can you hear the hard drive spinning? Remove all peripherals inside the computer (if it's not a laptop) then put them in one at a time, turning off the computer before installing the next peripheral, then on again etc. If the computer works without one of the devices then you found the culprit. Do the same with the RAM if you have more than one module. Could be a number of things. Also test the power supply with a multimeter or power supply tester. Let us know?!
 

http://www.techspot.com/community/topics/xcfe-sys-bsod.127588/
Relevancy 15.05%

Hi I got a new Inspiron laptop just a couple of days ago Its a T C D Ghz processor intel chipset with integrated graphics gb ram I had to reinstall vista after it went into Multiple BSOD a continuous loop - configuring updates shutting down confiiguring updates - after some windows updates None of the windows startup repair options worked Now after the reintall I am getting a lot of BSODs errors shown are IRQL Multiple BSOD NOT LESS OR EQUAL MEMORY MANAGEMENT REGISTRY ERROR and PAGE FAULT IN NON PAGED AREA most common being memory mgmt chkdsk shows no errors the memory test in the startup repair shows hardware errors with a msg that I need to contact the manufacturer Have updated all drivers and the bios but all that has changed is that the number of bsod instances have reduced from per hr to or Also in several instances the BSOD is preceded by services such as RPC Bluetooth wireless shutting down with the event viewer showing registry is corrupted Not sure what the problem is though have a feeling its something to do with a faulty RAM nbsp

A:Multiple BSOD

If you want to test your RAM use memtest:

1. Go to www.memtest.org and download the latest ISO version. It is free and perfectly safe.

2. Burn to a CD.

3. Place CD in your drive and reboot with CD in drive. (You might have to place your drive as first bootable in your BIOS) The test will take over.

4. Let it run for a LONG time. The rule is a minimum of 7 Passes. There are 8 individual tests per Pass. Many people will start this test before going to bed and check it the next day.

5. If you have errors you have corrupted memory and it needs to be replaced.

6. Also, with errors you need to run this test per stick of RAM. Take out one and run the test. Then take that one out and put the other in and run the test. If you start getting errors before 7 Passes you know that stick is corrupted and you don?t need to run the test any further on that stick.
 

http://www.techspot.com/community/topics/multiple-bsod.124531/
Relevancy 15.05%

Im working on my friends computer and it keeps crashing Specs MSI MS- Ver Intel Celeron Ghz MB Kingston PC New nVidia GeForce Mb AGP x GB Hitachi Hard Drive Sony DVD CD Burner watt Thermaltake PSU At first the on-board VGA stopped working I replaced it with a even reformat BSOD after Random AGP card and it worked fine for a month before it started having problems The original of the original ram sticks in bank stopped working Kept getting random BSOD s so I tossed the old Random BSOD even after reformat ram and left in the new Kingston stick Installed the new stick and it still BSOD s randomly They were very random but I got one written down x E xC x xB x IRQL NOT LESS OR EQUAL I thought Ram So I ran the stick on both DIMM slots with memtest multiple times and it found NO errors CPU temp oC at idle Random BSOD even after reformat cleaned heatsink applied AS still BSOD Next I broke the system down to the basics PSU CPU RAM Video card HD CD drive STILL BSOD Next I swapped out the PSU still BSOD Test hard drive with HDAT Hitachi drive fitness passed Reformat HD and reinstall Xp Pro not loading any Mobo drivers still BSOD Installed Mobo drivers minus nVidia drivers still BSOD Removed front panel USB connectors Swapped HD full format reinstall OS still BSOD Swapped Video card still BSOD BIOS is up to date only add-in card is the Video card I am at a loss spending wayy too much time on this thing Any help would be appreciated I know mini-dump files would be some help but I just re-formatted the HD again and havent reloaded the OS yet and im beat for now The only things I havent crossed out are the CPU and Mobo Are there any DOS based programs that I can use to test it The only boot disk I have ATM is Hirens Im guessing the Mobo may have crapped out especially since the on-board Video broke The on-board LAN works intermittently The system was built by another dude two years ago I dont see any damge on the Mobo Please help Thanks in advance nbsp

A:Random BSOD even after reformat

Sounds like the Chipset is knackered to be honest, it seems to be having problems across the entire spectrum, so I'd say it's the motherboard.
 

http://www.techspot.com/community/topics/random-bsod-even-after-reformat.126725/
Relevancy 15.05%

Hi all well i m hoping you guys can help I have recently purchased a new system i GTX and Msi Pro mobo with some ram of course I m getting random BSODs From what I can tell anyway I performed the memtest thingy all night last night with no errors I first installed XP sp on it and started getting BSOD randomly so I installed help new i7 Pro BSOD GTX260 MSI Windows bit which I have on it now however the same thing is BSOD new i7 GTX260 MSI Pro help happening I m usually quite good with these BSOD new i7 GTX260 MSI Pro help things but this time i need help I ve done the searches on the net but to no avail I dont know where to go next I m considering buying a test vid card for bucks just so see if it still happens with it installed but dont really want to Oh some specs Inno d GTX drivers - not oc d Corsair HX psu i - stock speed not OC d in any way MSI pro x -latest Bios crappy kingston gb ram all they had at the time Win Bit - fresh install build x WD Gb hdds in Raid Antec case As far as I can tell the ram is ok I ve tried changing the pci slot that the vid card is in but same thing Latest nvidia drvs for Win bit Hope to hear from you all soon nbsp

A:BSOD new i7 GTX260 MSI Pro help

hi wolf

Please upload your minidumps so we can have them analysed.

Spyder_1386
 

http://www.techspot.com/community/topics/bsod-new-i7-gtx260-msi-pro-help.126116/
Relevancy 15.05%

I keep getting BSODs with either DRIVER_IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NON_PAGED_AREA.

Ive have attached two of the latest minidumps
 

A:BSOD - PAGE_FAULT and DRIVER_IRQL

System specs including OS & SP would help. I am looking at a dump right now, assuming XP sp3
Your error on the second dump was 0x50 ...
But the Widbg report points to Vista... so you are not running XP...
I suspect this information is still valid.

This kind of error is usually associated with a memory problem.
Download Memtest86+ from www.memtest.org
Let it run for at least seven passes and see what it comes up with.
There are 8 tests per pass, and it will take a while...
If you start getting errors, you can stop, and remove one stick ... test the sticks one at a time to isolate the issue.
If your memory comes up clean, we can explore other options, but this is the likely place to start.

From MS



These errors may be caused by one or more of the following:

* Hardware failure (memory, processor, or motherboard).
* Anti-virus software that is running on your computer.
* Drivers installed by third-party software.

RESOLUTION
To resolve these behaviors, perform one or more of the following: Replace the f...
To resolve these behaviors, perform one or more of the following:

* Replace the faulty hardware. You may be able to determine the faulty hardware by running diagnostics provided by the manufacturer. Please contact the hardware manufacturer for more information.
* Disable any anti-virus software that is running on your computer. If the STOP errors no longer occur, contact the anti-virus software manufacturer about a possible upgrade.
* Disable any third-party drivers that may be running. If the STOP errors no longer occur, contact the third-party manufacturer about a possible upgrade.Click to expand...

Your first dump showed a different error.... 0xD1 error and these are almost always caused by faulty drivers/buggy software.
the analysis points to ntoskrnl.exe which is too general to help. In another case, video drivers were at issue...

Questions...
Are your video drivers updated?
Did your issues begin after starting some new activity? (like a new Game perhaps?)
Since both errors (0x50 and 0xD1) can point at drivers, this might be the place to start.
 

http://www.techspot.com/community/topics/bsod-page_fault-and-driver_irql.126443/
Relevancy 15.05%

This is a problem I ve been having for some months now I ve tried to troubleshoot my entire computer from day one and I ve gotten rid of lots of different problems One problem remains wont BSOD after PC boot though Some times often during the night or other times where I m AFK for a longer period of time - hours maybe shorter I get an ugly BSOD on my screen After this BSOD my computer wont boot In order to make the computer boot up I have to manually flash the BIOS something that gets very annoying in the long run What happens is I shut it down removing the BSOD I then turn it back on but no components are responding The screen is black gets no signal the keyboard has no signal the num- and capslock lights doesn t respond and the mouse s lazer is off I can t hear the HDD working either Has anyone got any idea what is going on PC wont boot after BSOD The BSOD BCCode returned is as follows BCCode c BCP C E BCP C BCP B BCP OSVer SP Product The quot BCCode C quot error is not familiar to me I can t even figure out what it is using Google so I guess this is sort of a last resort I would also like to know what Product is This product ID has appeared on every BSOD error I have gotten so that would probably help out a lot I hope some of you can help it would be greatly appreciated Specs Corsair Powersupply W Black ATX EPS MSI P Platinum Corsair Dominator TWIN X C D MB Intel Core Duo E GHz HIS Radeon HD MB IceQ nbsp

A:PC wont boot after BSOD

"I have to manually flash the BIOS"...

Do you actually mean "reset" the bios?

Does the computer keep the correct time when it is running? The CMOS battery may be dead or the motherboard is defective
 

http://www.techspot.com/community/topics/pc-wont-boot-after-bsod.126362/
Relevancy 29.24%

Hey guys as the title states I am having constant problems with my graphics driver crashing with the following message quot your graphics driver has stopped responding to commands quot something along ATI Radeon 9550/X1050 problems series constant those lines anyway lol I am using an AMD Athlon processor With the ATI Radeon X series MB VGA graphics card MB DDR RAM I recently tried updating to the latest drivers from ATI but had severe installation problems and ended up having to do a system restore So i am using the standard driver I can play counter-strike and battlefield reasonable consistantly Wont crash out for a few hours or ATI Radeon 9550/X1050 series constant problems so Which points out this cant be an overheating problem But when i try to play WoW i get about - minutes game time before it stops responding If anyone has any knowledge about how to fix this it would be great Edit Since doing the system restore my CPU speed has gone from ghz to mhz wtf is up with that nbsp

A:ATI Radeon 9550/X1050 series constant problems

Try "undoing" system restore. You should get get back your 2.4ghz processor speed. Since you are running only 512 mbs of ddr ram, you are operating with minimum ram. Try doubling that, it will help and might stop the crashes. Does your "paging file" (virtual memory) have at least 1 or 1.5 gigs? You have to have that. Good Luck.
 

http://www.techspot.com/community/topics/ati-radeon-9550-x1050-series-constant-problems.81662/
Relevancy 14.62%

hi all Recently i have been having problems with my geforce gt agp video card In games mostly ut k after a while the computer will freeze for about seconds then crash with a bsod saying that my video bsod loop 6600gt with Infinite driver was caught in an Infinite loop bsod with 6600gt infinite loop I am using driver version These drivers use to work perfectly with this card I have been using them for months and had no problems until recently I heard that these are the best drivers for this card I tried reinstalling the video drivers which worked for about an hour but then it crashed again After uninstalling the drivers i made sure every trace of the old install was gone by using driver cleaner pro so the drivers shouldn t be corrupt or conflicting with something Ive also tried other driver versions but they had the same issues The card does not seem to be overheating At the time it crashed the temp measured degrees Could this be an issue with my video card Could it have something wrong with it Or am i overlooking something here Thanks Nissanman nbsp

A:Infinite loop bsod with 6600gt

If you've already tried Driver Cleaner Pro, perhaps giving Driver Sweeper a try might produce better results. It's a very similar program, but I've used it many times and I've found, on some occasions, it to work a little better than Cleaner. Have you recently patched the game or downloaded any additional content for it. Have you tried reinstalling the game? 66 degrees is a little toasty, but it shouldn't crash the card unless the thermal is starting to lose its heat dissipation. You could always reapply some thermal compound, like Arctic Silver, to the core and see what happens. If you have the fan running at stock speeds, you can download RivaTuner to adjust it during games. Usually, a game will start to lag a bit, there may be some artifacts, and then it will quit if the video card is overheating. A BSOD is usually the product of misconfigured or incompatible software (i.e. the display driver). In your case, it's the configuration.
 

http://www.techspot.com/community/topics/infinite-loop-bsod-with-6600gt.124560/
Relevancy 15.05%

I have a problem with a pretty old sistem: spontaneous restarts and BSODs.
I formatted and reinstalled the OS,
I tested the RAM with MEMTEST86(no problem),
I tested the HARD DISK(no problem),
I changed the IDE cable,
I changed the power supply(500w),
I changed the Video and the problem persists.

my sistem :
- amd sempron 1800+
- 512 MB RAM pc3200
- asus a7n8x
- nvidia nforce fx5200
- dvdrw teac
- hdd western digital 200gb

I forgot to mention that sometimes i receive the message :"Warning!cpu overspeed!" when BIOS performs the "system inventory" and sometimes my cpu figures "1150Mhz", altough sometimes my cpu figures "1800+".

I hope you can help me with some advices.Sorry for my bad english.
 

A:Bsod, restarts - please help

Your motherboard is old. It might have some bulging capacitors around the CPU. Be prepared to buy a new motherboard, CPU, video card and memory... Or save for an entirely new computer
 

http://www.techspot.com/community/topics/bsod-restarts-please-help.125768/
Relevancy 14.62%

I can t seem to get my cpu past ghz without getting bsod right after the windows loading screen Is it just my rigs limit or is there any way to get it past ghz My specs are motherboard ga-m sli-s rev cpu amd athlon windsor ram becuase wintec is a quot registered dealer of aeneon memory quot i have gb sticks of wintec ampx ddr and gb sticks of aeneon ddr that say wintec ampx on them psu bfg tech LS- os windows vista bit home basic oem The multiplier is at and I cannot get the cpu or is it really the fsb but my bios says cpu past without a crash at the windows loading screen and I have tried changing the cpu voltage a little but not the memory voltage My temperature never gets past c with the cpu or is it the fsb at during stability tests I noticed in easy tune it says that my ram has been overclocked as well is that why its been crashing Here is a picture of my bios overclocking options http i photobucket com albums oo giganotasaurus bios overclocking jpg nbsp

A:Can't get CPU past 3ghz without bsod after windows loading screen

You might be able to get to higher speeds by pushing the CPU voltage, but that would make it run hotter. Core temperature scales in a linear fashion as core speed in MHz is increased, but core temperature scales geometrically when voltage is increased. In addition to higher temps, voltage increases reduce the life of the CPU. So basically I'm saying bump the voltage (at your own risk).

Make sure you're not FSB or memory limited by putting the CPU multiplier as high as it goes and the memory at the lowest possible speed. Put memory voltage to ~2.1v. I don't remember much about overclocking AMDs besides that basic kind of stuff.

According to The Overclocking World Record Database, the world record for Athlon 64 X2 5600+ Windsor core is 4151.4 MHz with a 1.68v core voltage. Setting your CPU to this sort of voltage is likely dangerous, but I'm just throwing that out there for you to show that 3 GHz is not the limit of these CPUs. Your particular chip might not clock any higher though so don't get excited
 

http://www.techspot.com/community/topics/cant-get-cpu-past-3ghz-without-bsod-after-windows-loading-screen.125423/
Relevancy 15.05%

Here s my problem a couple of weeks ago I started getting the BSOD with the most frequent message of quot Beginning physical memory dump quot Eventually I formatted and reinstalled windows still no success I ve updated drivers added registry scanners But no matter what (BSOD) Assistance appreciated I do the system gets worse I thought maybe it was because of a conflict with something I got from windows update But I m not tech savvy enough to diagnose and fix it I ve attached my PC stats from everest and I ve zipped and attached my minidumps If anyone could help me fix this it would make my day Also here are the logs from my event viewer I only have the ones since I reformatted Please let me know if you need more (BSOD) Assistance appreciated info EDIT Okay there is a forum for BSOD errors any chance a mod could move this thread I tried reloading the winzip (BSOD) Assistance appreciated file for some reason its not going through nbsp

A:(BSOD) Assistance appreciated

Sounds like unstable hardware, probably a power supply issue. Do you have another power supply that you can try?
 

http://www.techspot.com/community/topics/bsod-assistance-appreciated.125312/
Relevancy 14.62%

Just bought a new pc and a seperate copy of windows vista ultimate. I inserted the disk and I got to the screen that said "loading windows files" then after this it went black for a second the blue screen of death appeared.The first part of the error code was 0.0000007F and the rest were 0's. Anybody had this or know what it could mean? Here are the build

G31-M7 TE motherboard
intel quad-core 6600 processor
4GB ram
geforce 9800GT
1TB sata hard drive
 

A:BSOD on boot installing vista on new pc

When I read your issue I thought to myself, "That sounds like a memory issue." Here is the code and definition:

0x0000007F: UNEXPECTED_KERNEL_MODE_TRAP

One of three types of problems occurred in kernel-mode: (1) Hardware failures. (2) Software problems. (3) A bound trap (i.e., a condition that the kernel is not allowed to have or intercept). Hardware failures are the most common cause and, of these, memory hardware failures are the most common.

Try this: Take out one stick of RAM at a time and try to load it. Any BSODs?

Do this: http://www.techspot.com/vb/topic62524.html The good thing about this test is it engages almost immediately as you boot-up.

It could be your harddrive as well.
 

http://www.techspot.com/community/topics/bsod-on-boot-installing-vista-on-new-pc.125316/
Relevancy 14.62%

I get this BSOD

BCCode : 1000007e BCP1 : C000001D BCP2 : B941DF72 BCP3 : B404EBE0
BCP4 : B404E8DC OSVer : 5_1_2600 SP : 3_0 Product : 256_1

I downloaded new drivers, disable specs on the CPU (e8500) as recommended, but 3d game crash out regularly after about 30 mins or so.

Asus p5n-d is a bit of a dodgy MOBO but I tried everything that has been recommended including bios flashes, memory check, cpu heat checks and rectifying the correct nforce 750i drivers...latest windows updates...etc...

What is the crash? hardware or software? I have a Proline 500w psu and also run a single xfx geforce 9800gt, Intel core 2 duo e8500 wolfdale, Kingston ddr2 667 mem, 200 gig sata seagate hardrive and a cathode ray 17" monitor.

any clues ideas, other than a sledge hammer. Your help will be appreciated.
 

A:BSOD BCCode : 1000007e random crashes from what?

0x0000007E: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED

A system thread generated an exception which the error handler did not catch. There are numerous individual causes for this problem, including hardware incompatibility, a faulty device driver or system service, or some software issues. Check Event Viewer (EventVwr.msc) for additional information.

As you can tell the causes of this error are very diverse which makes it a difficult one, sometimes, to pin down. For clarification, are your BSODs only while doing 3d gaming? What about video card heat checks?
 

http://www.techspot.com/community/topics/bsod-bccode-1000007e-random-crashes-from-what.125137/
Relevancy 15.05%

I was on my desktop gaming as usual when a lovely BSOD flashed on my screen just quickly enough for me to not be able to read anything it said and then my computer restarted. After it restarted none of my hard drives show up in my bios and i cant get past the loadup screen seeing as how there is no windows showing up. I have 3 internal drives and 1 external that no longer show up in my Bios. I don't think that all 4 could have simultaneously failed and on top of that they are all relatively new. PLEASE someone help me, I have a project to finish before tomorrow
 

A:No hard drives after BSOD - help

Reset the motherboard's bios...
 

http://www.techspot.com/community/topics/no-hard-drives-after-bsod-help.124986/