Windows Support Forum

Sudden BSOD, 0x00000124, ntoskrnl.exe+7cc40

Q: Sudden BSOD, 0x00000124, ntoskrnl.exe+7cc40

Three months ago I had an issue with BSODs but they went away I'm a gamer and had no BSODS while playing many games Recently I've been playing the Hunter Red Orchestra F and the Battlefield beta I played for many hours without any issues then ntoskrnl.exe+7cc40 Sudden 0x00000124, BSOD, all of a sudden on the nd of this month had a BSOD while playing Battlefield Keep in mind I had played around hours of Battlefield over the previous days without a hitch so it's not like I was casually playing games And before that I played Red Orchestra for many hours no problems I played a few hours after my computer had restarted without issues The next day on the rd I played in the morning and sure enough minutes into playing I got another BSOD Sudden BSOD, 0x00000124, ntoskrnl.exe+7cc40 then another later in the day playing the Hunter a hunting game Each of these three BSODS gave the same error message Technical Information STOP x x xfffffa d c x b x ntoskrnl exe - Address xfffff c base at xfffff DateStamp x e aaa I have no idea what would have caused this I haven't installed anything new recently hardware or software wise besides those games I had installed new nvidia video drivers for my video card on the th thinking it was that I uninstalled them and installed the prior drivers that gave me no issues in the past The last BSOD occurred while using the older drivers so I don't think it's that I've been stable for over months without issues I'm going to try downclocking my cpu ram to see if that helps but I was stable before that Any idea what the cause is I attached my minidump files to this posting Thanks for trying to help

Relevancy 100%
Preferred Solution: Sudden BSOD, 0x00000124, ntoskrnl.exe+7cc40

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Sudden BSOD, 0x00000124, ntoskrnl.exe+7cc40

Hello Efstratios

* Please remove any CD visualization programs such as Daemon Tools and Alcohol 120%.

They use a driver, found in your dmp, called sptd.sys, that is notorious for causing BSODs.

Use this SPTD uninstaller DuplexSecure - Downloads DuplexSecure - FAQ

When you're done you can use this Freeware MagicISO Virtual CD/DVD-ROM(MagicDisc) in its place.
* Your Norton/Symantec. This is a known cause of BSOD's.
Remove and replace with Microsoft Security Essentials.

http://us.norton.com/support/kb/web_...080710133834EN

Virus, Spyware & Malware Protection | Microsoft Security Essentials

* Old drivers

Code:
ctgame.sys 4/7/2004 11:42:49 AM fffff880`054eb000 33f9f7f6`054efc80 0x33f9ff7600004c80 0x40734e89
RTCore64.sys 5/25/2005 5:39:12 PM fffff880`089f4000 fffff880`089fa000 0x00006000 0x42941d90
secdrv.SYS 9/14/2006 12:18:38 AM fffff880`08115000 fffff880`08120000 0x0000b000 0x4508052e
COMMONFX.DLL 4/10/2007 12:08:38 AM fffff880`0674c000 fffff880`06777000 0x0002b000 0x461a3ad6
CTAUDFX.DLL 4/10/2007 12:08:39 AM fffff880`06f51000 fffff080`07000000 0xfffff800000af000 0x461a3ad7
CTSBLFX.DLL 4/10/2007 12:08:42 AM fffff880`06ea6000 fffff880`06f51000 0x000ab000 0x461a3ada
Rtnic64.sys 3/31/2008 4:39:38 PM fffff880`05263000 fffff300`05277000 0xfffffa8000014000 0x47f0791a
000.fcl 9/27/2008 12:11:22 AM fffff880`08163000 fffff880`0818e000 0x0002b000 0x48dcdf7a
adfs.SYS 11/4/2008 3:48:14 AM fffff880`07c00000 fffff300`07c18000 0xfffffa8000018000 0x490f2b4e
gdrv.sys 3/13/2009 2:22:29 PM fffff880`089de000 fffff880`089e7000 0x00009000 0x49b9d175
ALSysIO64.sys 4/20/2009 6:41:04 AM fffff880`08df8000 fffff300`08e00000 0xfffffa8000008000 0x49eb7e50
spldr.sys 5/12/2009 3:56:27 AM fffff880`02141000 fffff880`02149000 0x00008000 0x4a0858bb
lirsgt.sys 5/18/2009 12:06:57 AM fffff880`08062000 fffff880`0806f000 0x0000d000 0x4a100bf1
atksgt.sys 5/18/2009 12:36:34 AM fffff880`0800a000 fffff880`08059000 0x0004f000 0x4a1012e2
GEARAspiWDM.sys 5/18/2009 11:17:04 PM fffff880`05256000 fffff300`05263000 0xfffffa800000d000 0x4a1151c0
LHidFilt.Sys 6/18/2009 3:49:39 AM fffff880`075b7000 fffff880`075ca000 0x00013000 0x4a391ea3
LMouFilt.Sys 6/18/2009 3:49:43 AM fffff880`075d7000 fffff880`075eb000 0x00014000 0x4a391ea7
LUsbFilt.Sys 6/18/2009 3:49:46 AM fffff880`07577000 01fff880`07587000 0x0200000000010000 0x4a391eaa
How To Find Drivers:




Quote:
- search Google for the name of the driver
- compare the Google results with what's installed on your system to figure out which device/program it belongs to
- visit the web site of the manufacturer of the hardware/program to get the latest drivers (DON'T use Windows Update or the Update driver function of Device Manager).
- if there are difficulties in locating them, post back with questions and someone will try and help you locate the appropriate program.


- - The most common drivers are listed on this page: Driver Reference Driver Reference
- - Driver manufacturer links are on this page: Drivers and Downloads

http://www.sevenforums.com/bsod-help-support/189971-sudden-bsod-0x00000124-ntoskrnl-exe-7cc40.html
Relevancy 84.32%

I keep getting a random BSOD, I get it a lot in Lightroom 3 but have gotten the same error doing nothing.

*** STOP: 0x00000124 (0x0000000000000000, 0xfffffa80053d5028, 0x00000000b2000040,
0x0000000000000800)
*** hal.dll - Address 0xfffff80002c15a3b base at 0xfffff80002c03000 DateStamp
0x4ce7c669

Minidump is attached

A:BSOD random error 0x00000124, hal.dll at address ntoskrnl.exe+7cc40

Windows 7
4 GB ram
Intel Q9450
Gigabit MB
Raptor HD

Full data is now attached

http://www.sevenforums.com/bsod-help-support/201400-bsod-random-error-0x00000124-hal-dll-address-ntoskrnl-exe-7cc40.html
Relevancy 89.87%

Hi, I've been having this BSOD appear very randomly.

IRQL_NOT_LESS_OR_EQUAL 0x0000000a
(all reports in .rar file)

Sometimes within 1 hour, other times as long as 24hrs+. I've got my BIOS/Drivers up to date for my CPU, Graphics Card, and Motherboard. I've rigorously tested my memory and have never had any issues arise.

It has occurred during
3d gaming,
when the system has been idle,
also when browsing with firefox or ie.

Any help at all would be appreciated, I've struggled with this BSOD for years I would love to finally find whats causing it.

Thank you.

A:BSOD ntoskrnl.exe+26ee0 ntoskrnl.exe+7cc40

  
Quote: Originally Posted by postal


Hi, I've been having this BSOD appear very randomly.

IRQL_NOT_LESS_OR_EQUAL 0x0000000a
(all reports in .rar file)

Sometimes within 1 hour, other times as long as 24hrs+. I've got my BIOS/Drivers up to date for my CPU, Graphics Card, and Motherboard. I've rigorously tested my memory and have never had any issues arise.

It has occurred during
3d gaming,
when the system has been idle,
also when browsing with firefox or ie.

Any help at all would be appreciated, I've struggled with this BSOD for years I would love to finally find whats causing it.

Thank you.


First lets start with asacpi.sys yours dated 2005
1-ASACPI.SYS

The pre 2009 version of this driver is a known BSOD cause.

Please visit this link: ASUS teK Computer Inc. -Support- Drivers and Download P7P55D LE
ASUSTeK Computer Inc. -Support- Drivers and Download P7P55D LE

Scroll down to the Utilities category, then scroll down to the "ATK0110 driver for WindowsXP/Vista/Windows 7 32&64-bit" (it's about the 12th item down).
Download and install it.
Go to C:\Windows\System32\drivers to check and make sure that the ASACPI.SYS file is date stamped from 2009 or 2010 (NOT 2005).

http://www.sevenforums.com/bsod-help-support/194256-bsod-ntoskrnl-exe-26ee0-ntoskrnl-exe-7cc40.html
Relevancy 87.72%

Hi I have a new rig i built my self and it runs perfectly except the occasional BSOD and i cant for the life of me work out why - - dmp BAD POOL HEADER x fffff a a ff af a a fffff a a ntoskrnl exe ntoskrnl exe cc NT Kernel amp System Microsoft Windows Operating System Microsoft Corporation win sp gdr - x ntoskrnl exe cc C Windows Minidump - - dmp - - dmp PAGE FAULT IN NONPAGED AREA x fffffa fffff b d ntoskrnl exe ntoskrnl exe cc NT Kernel amp System Microsoft Windows Operating System Microsoft Corporation win BSOD's ntoskrnl.exe+7cc40 sp gdr - x ntoskrnl exe cc C Windows Minidump - - dmp - - dmp KMODE EXCEPTION NOT HANDLED x e ntoskrnl exe ntoskrnl exe cc NT Kernel amp System Microsoft Windows Operating System Microsoft Corporation win sp gdr - x ntoskrnl exe cc C Windows Minidump - - dmp Basically i bought one of the affected mother boards before the b revision for sandy bridge systems I managed to get an updated mobo via RMA So i changed mother boards ntoskrnl.exe+7cc40 BSOD's over Then a few weeks later i changed my RAM old was Corsair XMS mhz gb new is Corsair Vengeance mhz ntoskrnl.exe+7cc40 BSOD's gb I also started off with a F Corsair ssd gb and change dthat to a new force gb ssd Since i reinstalled my OS win x i keep getting BSOD's I have formatted and reinstalled and the same happens Please any assistance would be greatly appreciated Attached my minidump folder Thanks in advance

A:ntoskrnl.exe+7cc40 BSOD's

  
Quote: Originally Posted by Kristofaaa


Hi,

I have a new rig i built my self and it runs perfectly except the occasional BSOD and i cant for the life of me work out why...

091711-6006-01.dmp 17/09/2011 21:33:23 BAD_POOL_HEADER 0x00000019 00000000`00000003 fffff8a0`1205a820 ff8af8a0`1205a820 fffff8a0`1205a820 ntoskrnl.exe ntoskrnl.exe+7cc40 NT Kernel & System Microsoft? Windows? Operating System Microsoft Corporation 6.1.7601.17640 (win7sp1_gdr.110622-1506) x64 ntoskrnl.exe+7cc40 C:\Windows\Minidump\091711-6006-01.dmp 8 15 7601 293,064

091311-5896-01.dmp 13/09/2011 18:56:14 PAGE_FAULT_IN_NONPAGED_AREA 0x00000050 fffffa80`55685460 00000000`00000001 fffff880`06b9d316 00000000`00000005 ntoskrnl.exe ntoskrnl.exe+7cc40 NT Kernel & System Microsoft? Windows? Operating System Microsoft Corporation 6.1.7601.17640 (win7sp1_gdr.110622-1506) x64 ntoskrnl.exe+7cc40 C:\Windows\Minidump\091311-5896-01.dmp 8 15 7601 291,016

091311-7722-01.dmp 13/09/2011 13:40:14 KMODE_EXCEPTION_NOT_HANDLED 0x0000001e 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 ntoskrnl.exe ntoskrnl.exe+7cc10 NT Kernel & System Microsoft? Windows? Operating System Microsoft Corporation 6.1.7601.17640 (win7sp1_gdr.110622-1506) x64 ntoskrnl.exe+7cc10 C:\Windows\Minidump\091311-7722-01.dmp 8 15 7601 288,232

Basically i bought one of the affected mother boards before the b3 revision for sandy bridge systems. I managed to get an updated mobo via RMA.

So i changed mother boards over. Then a few weeks later i changed my RAM, old was Corsair XMS 1600mhz 4gb, new is Corsair Vengeance 1866mhz 8gb.

I also started off with a F60 Corsair ssd 60gb and change dthat to a new force 3 120gb ssd.

Since i reinstalled my OS (win 7 x64) i keep getting BSOD's. I have formatted and reinstalled and the same happens.

Please any assistance would be greatly appreciated...

Attached my minidump folder...

Thanks in advance.


Easy, these were related to your C-media Audio driver. I would update to the newest version below.

C-Media Electronics, Inc.


Since pool corruption was involved I would run these two tests.
1-Memtest.

*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program.

*Boot from the CD, and leave it running for at least 6 or 8 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

RAM - Test with Memtest86+

2-Driver verifier






Quote:
I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wai... Read more

http://www.sevenforums.com/bsod-help-support/187229-ntoskrnl-exe-7cc40-bsods.html
Relevancy 87.72%

Have received this BSOD several times while the machine has been in Sleep Mode. Normal operation is to turn the monitor off and put the computer into that mode during the night. The BSOD is the normal DRIVER_POWER_STATE_FAILURE ntoskrnl.exe caused by address ntoskrnl.exe+7cc40.

Desktop Computer less than a year old. OEM version of Win7 Pro 64-bit pre-installed at time of purchase. Just updated computer info for this machine.,
Uploaded Health Report.html and a Windows_NT6_BSOD_v3.03_jcgriff2_.exe.zip. Did not see the Health Report upload so I redid it as a zip file.
If I missed anything, please let me know. Really do appreciate your help to resolve this. Have not had a BSOD at any other time than at Sleep Mode to the best of my knowledge.

The 031712-109263-01 is the zip of my minidump file on the day of the event.

A:BSOD ntoskrnl.exe+7cc40

You uploaded the application instead of the data.
Try this method.

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

If you are overclocking STOP

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.



To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

http://www.sevenforums.com/bsod-help-support/219840-bsod-ntoskrnl-exe-7cc40.html
Relevancy 87.72%

Im getting massive BSOD's every day. I can't even use this computer most hours and it'll probably BSOD in a few minuetes.

Could someone look at the txt file I included and point me in the right direction? Or if I need more info please tell me!!! Because Im going crazy with this BSOD.

A:BSOD ntoskrnl.exe 7cc40

Please follow this post and reply accordingly.

http://www.sevenforums.com/crashes-d...tructions.html

http://www.sevenforums.com/bsod-help-support/221428-bsod-ntoskrnl-exe-7cc40.html
Relevancy 86.43%

hi here is the issue about two weeks ago Windows BSOD 7 ntoskrnl.exe+7cc40 - I took my laptop to the service because its disk drive not seeing any cd or dvd than they changed it with a new one after that they said we updated the bios after or days later BSOD Windows 7 - ntoskrnl.exe+7cc40 I'm on the Internet I got blue screen error driver power state failure I tried to update some of my driver such as graphic driver and tried to update windows it did't work third crash happened when I was trying to model something I opened the program at the same time rhino solid dsmax last crash was happened this morning when I was trying to restart my computer it says closing the pc but after - minutes later it crashes in addition my laptop opens very slowly than usual Some information about the crash Sorunlu Olay Ad BlueScreen OS S r m Yerel Kimlik BCCode f BCP BCP FFFFFA DA BCP FFFFF BA BCP FFFFFA E B OS Version Service Pack Product I check my pc with bluescreenview it says ntoskrnl cc error but don't know what to do and sorry for my bad English I really need your help Thank you in advance

A:BSOD Windows 7 - ntoskrnl.exe+7cc40

Welcome aboard, Brabbit.

Fresco Logic xHCI (USB3) Device Driver is initially identified as the cause of the crash.

Code:
Irp is active with 4 stacks 3 is current (= 0xfffffa8005e36410)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace. Pending has been returned
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 16, 0] 0 0 fffffa800667da10 00000000 00000000-00000000
\Driver\pci
Args: 00000000 00000000 00000000 00000005
>[ 16, 2] 0 e1 fffffa800860dac0 00000000 fffff800032e31b0-fffffa800e4492c0 Success Error Cancel pending
Unable to load image \SystemRoot\system32\DRIVERS\FLxHCIc.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for FLxHCIc.sys
*** ERROR: Module load completed but symbols could not be loaded for FLxHCIc.sys
\Driver\FLxHCIc nt!PopSystemIrpCompletion
Args: 00016600 00000000 00000006 00000005
[ 0, 0] 0 0 00000000 00000000 00000000-fffffa800e4492c0

Args: 00000000 00000000 00000000 00000000
And, the driver is very old.

Code:
start end module name
fffff880`049a5000 fffff880`049f5000 FLxHCIc T (no symbols)
Loaded symbol image file: FLxHCIc.sys
Image path: \SystemRoot\system32\DRIVERS\FLxHCIc.sys
Image name: FLxHCIc.sys
Timestamp: Thu Feb 24 14:29:52 2011 (4D661E08)
CheckSum: 0004C3F2
ImageSize: 00050000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
You try to update it from FRESCO LOGIC INC.===Leap into SuperSpeed===.

The Device Object of the blocked IRP is really interesting.

Code:
Device object (fffffa800860dac0) is for:
InfoMask field not found for _OBJECT_HEADER at fffffa800860da90
\Driver\FLxHCIc DriverObject fffffa8008668910
Current Irp 00000000 RefCount 0 Type 00000022 Flags 00002050
DevExt fffffa8008af1370 DevObjExt fffffa800860dc30
ExtensionFlags (0000000000)
Characteristics (0x00000100) FILE_DEVICE_SECURE_OPEN
AttachedTo (Lower) fffffa800667d7f0*** WARNING: Unable to verify timestamp for ACPI.sys
*** ERROR: Module load completed but symbols could not be loaded for ACPI.sys
Unable to load image \SystemRoot\System32\Drivers\sptd.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for sptd.sys
*** ERROR: Module load completed but symbols could not be loaded for sptd.sys
\Driver\ACPI
Device queue is not busy.
Daemon Tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known BSOD causer. Uninstall the program at first. Then download SPTD standalone installer from Disk-Tools.com, and execute the downloaded file as guided below :
Double click to open it.
Click this button only:

If it is grayed out, as in the picture, there is no more SPTD in your system, and you just close the window.
From another crash dump, that is alos a stop 0x9F; showing a different crasher. Atheros Bluetooth Driver.

Code:
Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 e1 fffffa8009de5030 00000000 00000000-00000000 pending
Unable to load image \SystemRoot\system32\DRIVERS\btfilter.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for btfilter.sys
*** ERROR: Module load completed but symbols could not be loaded for btfilter.sys
\Driver\BtFilter
Args: 00000000 00000001 00000001 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-fffffa800ec5dc90

Args: 00000000 00000000 00000000 00000000
Update it from ATHEROS drivers for Microsoft Windows (Atheros?????).

Apparently there are no other errors, but as the system is crashing, you should pay attention to these suggestions, too.

Free up the startup.
Click on the Start button
Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the “Sta... Read more

http://www.sevenforums.com/bsod-help-support/273475-bsod-windows-7-ntoskrnl-exe-7cc40.html
Relevancy 86.43%

The BSODs appear random - eg once during surfing with IE9, another time while using Photoshop. BSODs not regular or often - maybe once a fortnight - but seemingly completely unpredictable.

MemTest run (just for an hour) didn't show up any problems.

I'd be grateful for a steer on what can be causing the BSODs.

Thanks

A:Intermittent BSOD ntoskrnl.exe (nt+7cc40)

  
Quote: Originally Posted by Davidc2


The BSODs appear random - eg once during surfing with IE9, another time while using Photoshop. BSODs not regular or often - maybe once a fortnight - but seemingly completely unpredictable.

MemTest run (just for an hour) didn't show up any problems.

I'd be grateful for a steer on what can be causing the BSODs.

Thanks


Easy, your Symantec is causing memory corruption. Remove and replace with Microsoft Security Essentials
ftp://ftp.symantec.com/public/englis...moval_Tool.exe
Virus, Spyware & Malware Protection | Microsoft Security Essentials

http://www.sevenforums.com/bsod-help-support/192323-intermittent-bsod-ntoskrnl-exe-nt-7cc40.html
Relevancy 86.43%

For two BSOD every ntoskrnl.exe+7cc40 time weeks I am getting or times a day the same BSOD with ntoskrnl exe cc with my Dell z Mostly it happens when I am not working on the computer But also it happens during my work BSOD every time ntoskrnl.exe+7cc40 but I did not notice a real pattern My computer is a Dell z of months old bits My Windows Home Premium was installed by Dell And I have updated it normally Service Pack I also use System Mechanic The only strange thing I notice already for a long time before the BSOD happened the first time that the computer does not go to sleep when it is not on battery but stays alive including the screen the whole night Or when it is on battery the next morning there is no energy any more But I don't know if there is any connection Of course I changed the settings many times but no effect Attached the files the way it was asked I really hope someone can give me a direction the find the solution Thank you in advance from Amsterdam Holland Topdognl

A:BSOD every time ntoskrnl.exe+7cc40

These were Related to NETwNs64.sys Wireless WiFi Link Driver from Intel Corporation. I would re-install the newest version available.

http://www.sevenforums.com/bsod-help-support/210952-bsod-every-time-ntoskrnl-exe-7cc40.html
Relevancy 86.43%

10 days ago i have BSOD frequently. Even when the computer rest appears suddenly a blue screen. SOmetimes when i navigate on Internet.
I have to types of BSOD:
IRQL_NOT_LESS_OR_EQUAL caused by the adress ntoskrnl.exe+7cc40
BSOD caused by hal.dll+12a3b
My OS is Win7 Home Premium SP1. I send you the report of BlueScreenView with more details.
Could you tell me please some advice?
Thank you very much

A:BSOD IRQL_NOT_LESS_OR_EQUAL ntoskrnl.exe+7cc40

NOTE: Please provide the following information for a more detailed response: http://www.techsupportforum.com/foru...ta-452654.html

While waiting for a reply:

I suggest starting all troubleshooting with the following diagnostic tests (located at this link: Hardware Diagnostics ). They'll save you a lot of time and heartache if there is a hardware failure, and you'll have the disks on hand in case you need them in the future:

Quote:




H/W Diagnostics:
Please start by running these bootable hardware diagnostics:
Memory Diagnostics (read the details at the link)
Hard Drive Diagnostics (read the details at the link) - Test ALL of the hard drives.

Also, please run one of these free, independent online malware scans to ensure that your current protection hasn't been compromised: Free Online AntiMalware Resources (read the details at the link)
There are also free, bootable antivirus disks at this link: Free Online AntiMalware Resources - Bootable Disks




Also, please run Driver Verifier according to these instructions: Driver Verifier Settings

http://www.techsupportforum.com/forums/f299/bsod-irql_not_less_or_equal-ntoskrnl-exe-7cc40-633924.html
Relevancy 86.43%

Hi all, I have been getting BSODs since January 2012 while playing games or simply surfing the internet using Firefox or IE9.

My PC build is as follows:

AMD Phenom II X4 945
Biostar A880G+ motherboard
Kingston DDR3 PC1333 x 2 (4GB total)
Palit GTX460 768MB PCI-E
Western Digital HDD 500GB SATA
Windows 7 Home Premium 64bit (OEM DVD from retail shop)

Have just taken out 1 DRAM to isolate the problem; since there are some cases like mine that eventually suggest physical memory module problems in this forum.

Dump files and system health report html file attached.

A:Random BSOD - ntoskrnl.exe+7cc40

Hi Miki, welcome to SevenForums!

Four dumps, two memory management, one IRQL and one System Service Exception. There's a few things I want you to do!

First off, in your drivers list I noticed you have dtsoftbus01.sys, which is a driver for Daemon Tools, and Daemon Tools is a VERY large causer of BSODs in the W7 environment. Please fully uninstall Daemon Tools and then restart your system.

Two tests I'd like you to run:






Quote:
Memtest:

Read the following to test your memory for errors.

Driver Verifier:

Read the following to enable Driver Verifier. Use Driver Second if Memtest finds nothing, as it's likely a software / driver issue, we just aren't being told what it is, and hopefully Driver Verifier will than force a crash if it finds the violating driver.



Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1A, {41790, fffffa80008fa0f0, ffff, 0}

Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+36024 )

Followup: MachineOwner
---------

1: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

MEMORY_MANAGEMENT (1a)
# Any other values for parameter 1 must be individually examined.
Arguments:
Arg1: 0000000000041790, The subtype of the bugcheck.
Arg2: fffffa80008fa0f0
Arg3: 000000000000ffff
Arg4: 0000000000000000

Debugging Details:
------------------
BUGCHECK_STR: 0x1a_41790

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

PROCESS_NAME: MemeoDashboard

CURRENT_IRQL: 0

LAST_CONTROL_TRANSFER: from fffff8000310a150 to fffff8000309ac40

STACK_TEXT:
fffff880`092715f8 fffff800`0310a150 : 00000000`0000001a 00000000`00041790 fffffa80`008fa0f0 00000000`0000ffff : nt!KeBugCheckEx
fffff880`09271600 fffff800`030880ff : fffffa80`00000000 00000000`085fffff 00000000`00000000 00000000`00000000 : nt! ?? ::FNODOBFM::`string'+0x36024
fffff880`092717c0 fffff800`03099ed3 : ffffffff`ffffffff fffff880`09271a90 fffff880`09271a98 00000000`00008000 : nt!NtFreeVirtualMemory+0x61f
fffff880`092718c0 fffff800`03096470 : fffff800`033179af 00000000`00000010 00000000`00000086 fffff880`09271a88 : nt!KiSystemServiceCopyEnd+0x13
fffff880`09271a58 fffff800`033179af : 00000000`00000010 00000000`00000086 fffff880`09271a88 00000000`00000000 : nt!KiServiceLinkage
fffff880`09271a60 fffff800`03370b8d : 00000000`08500000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!RtlFreeUserStack+0x27
fffff880`09271a90 fffff800`03370eed : fffff880`00000000 00000000`0777e300 00000000`7ef12000 00000000`00000000 : nt!PspExitThread+0x5dd
fffff880`09271b90 fffff800`03370ff5 : fffffa80`06e74b60 00000000`00000000 fffffa80`06e74b60 00000000`0777ec00 : nt!PspTerminateThreadByPointer+0x4d
fffff880`09271be0 fffff800`03099ed3 : fffffa80`06e74b60 fffff880`09271ca0 00000000`7ef12000 00000000`7ef12000 : nt!NtTerminateThread+0x45
fffff880`09271c20 00000000`771f184a : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
00000000`0777e348 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x771f184a
STACK_COMMAND: kb

FOLLOWUP_IP:
nt! ?? ::FNODOBFM::`string'+36024
fffff800`0310a150 cc int 3

SYMBOL_STACK_INDEX:... Read more

http://www.sevenforums.com/bsod-help-support/216487-random-bsod-ntoskrnl-exe-7cc40.html
Relevancy 86.43%

So I do have a OC, but it was stable (Intel Burn Test, Prime95). I was playing the Binding of Isaac (flash game on steam). What is most likely the cause here?

A:Had a random BSoD, not sure what the cause, ntoskrnl.exe+7cc40, dmp in

Oh I should note my PC first froze (but my mouse could still move) for a while, before the blue screen came.

Could flash have caused this? I did get a Flash update today.

http://www.sevenforums.com/bsod-help-support/198614-had-random-bsod-not-sure-what-cause-ntoskrnl-exe-7cc40-dmp.html
Relevancy 86.43%

Hello,

I am getting BSOD every couple of days with no apparent reason sometime with doing virus scans, running windows movie maker and sometime while idle. Not sure what's going on please help - I have attached .dmp for assessment.

http://www.sevenforums.com/attachmen...1&d=1331424155

Hopefully someone can advise me on this not really a huge problem but would like to resolve it before it becomes one.

A:Random BSOD - ntoskrnl.exe (nt+7cc40) Please Help

Related to your directx

Diagnosing basic problems with DirectX

http://www.sevenforums.com/bsod-help-support/218697-random-bsod-ntoskrnl-exe-nt-7cc40-please-help.html
Relevancy 86.43%

Greetings Here is the issue About mid December I began having problems with 7 ntoskrnl.exe+7cc40 Windows BSOD - random BSOD's The initial tell-tale signs led to numerous issues I began slowly eliminating causes until I was left with Re-Installing Windows Since then I have had the same issues over and over again Here BSOD Windows 7 - ntoskrnl.exe+7cc40 are the corrective actions I have taken thus far from most recent to windows install In Bios I manually set timing of RAM to manufacture's recommendations from Website Identified and removed bad RAM Verified remaining RAM with hours of Memtest passed defects Replaced Motherboard M A T USB Used known functional video card uninstalled driver of old card before install Tested computer with each stick of RAM using different slots Clean installed windows ---- I included all dump files in the zip file since install but the last - are after the new motherboard and the last are after the verified RAM The very last dump was recorded using Driver Verifier I will continue to stress test my machine with driver verifier and post the dump files as I get them I am going on months and if this doesn't get fixed soon I'm trying a hammer lol

A:BSOD Windows 7 - ntoskrnl.exe+7cc40

As Promised:

Driver Verifier enabled as directed and ran it into the ground.

Seem to be alot of views... Is my problem common or just scaring away the Gurus?

Here are a few things I have tried.

Rolled back AMD driver to last version, Crashed.

Removed all peripherals except USB keyboard and Mouse and monitor.

Ran GPUZ through a crash. Log attached.

I will be going to Saphire's site and downloading any driver they have listed there for my Video Card (Radeon HD 6850)

Please help if you can.

http://www.sevenforums.com/bsod-help-support/214051-bsod-windows-7-ntoskrnl-exe-7cc40.html
Relevancy 85.57%

Hello,

This is my 1st time installing Windows 7 Ultimate 64bit on my new rig. While i was using my pc normally, not gaming, it just crashed and went into blue screen. Twice.
First error was MEMORY_MANAGEMENT and the second error was IRQL_NOT_LESS_OR_EQUAL.
And so, i tried using BlueScreenView to open the .dmp files and both of the .dmp files are caused by ntoskrnl.exe.

My rig's spec:
Windows 7 Ultimate 64bit SP1
Intel Core i5 2500
Asus P8P67 LE
Mushkin 4GB DDR3 x 2
500GB WD HDD
Nvidia 9800GT

I've attached the .dmp files. Any help on this issue would be much appreciated. Thanks!

A:Random BSOD caused by ntoskrnl.exe+7cc40

  
Quote: Originally Posted by getxposed


Hello,

This is my 1st time installing Windows 7 Ultimate 64bit on my new rig. While i was using my pc normally, not gaming, it just crashed and went into blue screen. Twice.
First error was MEMORY_MANAGEMENT and the second error was IRQL_NOT_LESS_OR_EQUAL.
And so, i tried using BlueScreenView to open the .dmp files and both of the .dmp files are caused by ntoskrnl.exe.

My rig's spec:
Windows 7 Ultimate 64bit SP1
Intel Core i5 2500
Asus P8P67 LE
Mushkin 4GB DDR3 x 2
500GB WD HDD
Nvidia 9800GT

I've attached the .dmp files. Any help on this issue would be much appreciated. Thanks!


Easy your Kaspersky. Remove and replace with Microsoft Security Essentials

http://support.kaspersky.com/downloa...vremover10.zip

Microsoft Security Essentials - Free Antivirus for Windows

http://www.sevenforums.com/bsod-help-support/194614-random-bsod-caused-ntoskrnl-exe-7cc40.html
Relevancy 85.57%

HI my name is banby and i'm using this computer:

manufacturer: Dell
model :inspiron 570
processor : AMD ATHLON(TM) IIx2 250 processor 3.00 GHz
installed memory(RAM):4.00 GB (3.75 GB usable)
also, i'm using a windows 7 home premium sp1 64 bit.
well, since 2 months my computer is shutting down unexpectly and a blue screen appear.sometimes it happens 3 to 4 times a day. After researches in minidump repports,i found a that it was due to

*msahci.sys
*ntoskrnl.exe ...
now,i'm confused i don't know what to do to fix this issue
i also collected reports with sf diagnostic tool that i submitted with this post
thank you to help me

A:frequent BSOD on my computer due to ntoskrnl.exe+7cc40

Welcome aboard, banby.

► A lot of problem creators are there
Catalyst Control Center
Norton AntiVirus ; replace by Microsoft Security Essentials - Free Antivirus for Windows
PC Tools Registry Mechanic
Roxio Creator Starter
WinUtilities
Wise Care 365
► Some Dell Junks are also present there. Remove them up too.

Clean Up Factory Bloatware
► Free up the startup.

Click on the Start button
Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the “Startup” tab.
Deselect all items other than the antivirus.
Apply > OK
Accept the restart.
► Finally, Your crash dumps are not showing any finite probable cause. In such a situation, it is better to enable Driver Verifier to monitor the drivers.

Driver Verifier - Enable and Disable

Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

Let us know the results, with the subsequent crash dumps, if any.

http://www.sevenforums.com/bsod-help-support/255609-frequent-bsod-my-computer-due-ntoskrnl-exe-7cc40.html
Relevancy 85.57%

Dear All,

i have problem with my computer. From time to time appears BSOD. I attached few minidumps, and please analyze it. I tried to open them in BlueScreenViewer and all of them are related to ntoskrnl.exe as i wrote in title.

This is my configuration:
Seagate 1 TB Barracuda 7200.12 (32MB, Serial ATA III)
Radeon 6850 XFX 1GB 2xDVI&HDMI&DP (PCI-E)
Intel Core i5 2500K 3,30 GHz BOX
Corsair CMPSU-800GEU - 800W
Microsoft Windows 7 Home Premium PL OEM 64Bit SP1
Gigabyte GA-H67MA-UD2H-B3
GoodRam DDR3 4GB 1333MHz CL9
CoolerMaster Elite 310 Black-Orange - bez zasilacza
Logitech Wireless Desktop MK320
LG SuperMulti DVD+/-RW GH22NS40 bulk black (bez oprogramowania)

Any ideas?

Thank Yoy in advance

Damian

A:BSOD, ntoskrnl.exe+7cc40, appears randomly.

Two issues

1-sptd.sys

Please remove any CD visualization programs such as Daemon Tools and Alcohol 120%.

They use a driver, found in your dmp, called sptd.sys, that is notorious for causing BSODs.

Use this SPTD uninstaller DuplexSecure - Downloads DuplexSecure - FAQ

when you're done you can use this Freeware:

MagicISO Virtual CD/DVD-ROM (MagicDisc) in its place

Using MagicISO to create ISO image files

2- 3 year old ESET smart security. This is the cause of at least the ones in march, and Feb. Update to current version. If you still are crashing remove it to test.

http://www.sevenforums.com/bsod-help-support/219993-bsod-ntoskrnl-exe-7cc40-appears-randomly.html
Relevancy 85.57%

hi

can someone please help i keep getting blue error screens different types of errors but all having the same crash address been using bluescreen viewer to see the errors

iv tried as much as i can by updating drivers and checking if windows is up to date

looked on other forums but just want a simple answer to what the problem actually is

iv uploaded the health report and the crash files

thank u

A:BSOD all from same crash address ntoskrnl.exe+7cc40.. please help!!

20 memory dumps over the past 3 days - Wow!

If you are using a USB mouse, it's safe to ignore the error in perfmon /report about a PS2 mouse

Only 63 memory dumps after SP1 - most systems have more than 70. Please check Windows Update for all available updates.

Windows 7 does not like wireless USB devices such as the NETGEAR WNDA3100v2 device installed on your system. Here's my rant about them:





Quote:
I do not recommend using wireless USB devices. Especially in Win7 systems.
These wireless USB devices have many issues with Win7 - and using Vista drivers with them is almost sure to cause a BSOD.
Should you want to keep using these devices, be sure to have Win7 drivers - DO NOT use Vista drivers!!!
An installable wireless PCI/PCIe card that's plugged into your motherboard is much more robust, reliable, and powerful.


More to follow when the memory dumps are finished running (and I have to feed my dogs now!).....

http://www.sevenforums.com/bsod-help-support/212524-bsod-all-same-crash-address-ntoskrnl-exe-7cc40-please-help.html
Relevancy 85.57%

I've had half a dozen crashes since December that I can easily reproduce when attempting to copy BSOD ntoskrnl.exe+7cc40 copying files, large amounts of data hundreds of GB BSOD copying files, ntoskrnl.exe+7cc40 between non-OS drives Bug check code is usually x a IRQL NOT LESS OR EQUAL but I've also seen x NTFS FILE SYSTEM and x c DRIVER CORRUPTED EXPOOL The crash happens randomly during the copy process sometimes very quickly and other times only after a half hour or more Dumps are attached and debugger analyses for the most recent crashes have been copied below I thought I had a memory leak because file copy operations always consumed all GB of physical memory installed but it turns out I did not have swap files set for my non-OS drives I setup swap files this morning which reduced physical memory use during data transfer from GB to GB but still ended up with a BSOD despite this fix I've had BSODs when using windows shell to copy or a freeware utility syncback I've also had BSODs when trying to copy over a network to a non-OS drive I'm not running any quirky security software MSE Comodo Firewall My rig is overclocked CPU-Z Validator but stable hours prime all intel burn tests memtest for hours etc See http img imageshack us img bstability png SFC scannow reports nothing Disk check has not reported errors Ideas Code Microsoft R Windows Debugger Version AMD Copyright c Microsoft Corporation All rights reserved Loading Dump File C Windows Minidump - - dmp Mini Kernel Dump File Only registers and stack trace are available Symbol search path is SRV C Symbols http msdl microsoft com download symbols Executable search path is C Windows System Windows Kernel Version Service Pack MP procs Free x Product WinNt suite TerminalServer SingleUserTS Built by amd fre win sp gdr - Machine Name Kernel base xfffff a PsLoadedModuleList xfffff f Debug session time Tue Feb UTC - System Uptime days Loading Kernel Symbols Loading User Symbols Loading unloaded module list Bugcheck Analysis Use analyze -v to get detailed debugging information BugCheck A a fffff f Probably caused by memory corruption nt MiRestoreTransitionPte Followup MachineOwner --------- kd gt analyze -v Bugcheck Analysis IRQL NOT LESS OR EQUAL a An attempt was made to access a pageable or completely invalid address at an interrupt request level IRQL that is too high This is usually caused by drivers using improper addresses If a kernel debugger is available get the stack backtrace Arguments Arg a memory referenced Arg IRQL Arg bitfield bit value read operation write operation bit value not an execute operation execute operation only on chips which support this level of status Arg fffff f address which referenced memory Debugging Details ------------------ WRITE ADDRESS GetPointerFromAddress unable to read from fffff b a CURRENT IRQL FAULTING IP nt MiRestoreTransitionPte fffff f f fba b f lock bts dword ptr rbx h Fh CUSTOMER CRASH COUNT DEFAULT BUCKET ID VISTA DRIVER FAULT BUGCHECK STR xA PROCESS NAME SyncBack exe TRAP FRAME fffff ce cf -- trap xfffff ce cf NOTE The trap frame does not contain all registers Some register values may be zeroed or incorrect rax rbx rcx fffff d e rdx rsi rdi rip fffff f rsp fffff ce d rbp r r r r r r r r iopl nv up ei pl nz na po nc nt MiRestoreTransitionPte x fffff f f fba b f lock bts dword ptr rbx h Fh ds Resetting default scope LAST CONTROL TRANSFER from fffff e to fffff c STACK TEXT fffff ce ce fffff e a a nt KeBugCheckEx fffff ce ce fffff e fffff a d bff nt KiBugCheckDispatch x fffff ce cf fffff f fffffa a ff fffffa cd a fffff a e ad fffffa a nt KiPageFault x fffff ce d fffff d ad fffff fffffa a ff fffffa a nt MiRestoreTransitionPte x fffff ce d b fffff b bc fffff ce d ffffffff ffffffff nt MiRemoveLowestPriorityStandbyPage x d fffff ce d fffff afe e fffff c fffff nt MmCopyToCachedPage xe fffff ce d fffff b f fffffa feb fffff ce d nt CcMapAndCopyInToCache x e fffff ce d fffff bf fffff ce d fffffa fc e nt CcCopyWrite x fffff ce d a fffff a fffffa fc... Read more

A:BSOD copying files, ntoskrnl.exe+7cc40

Nice post thanks

These crashes were caused by memory corruption/exception (probably a driver).
Please run these two tests to verify your memory and find which driver is causing the problem.

If you are overclocking anything reset to default before running these tests.
In other words STOP!!!
Memtest.





Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.



RAM - Test with Memtest86+

Driver verifier






Quote:
Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

So, I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Special Pool", "Force Pending I/O Requests" and "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

Reboot into Windows (after the crash) and turn off Driver Verifier by going back in and selecting "Delete existing settings" on the first page, then locate and zip up the memory dump file and upload it with your next post.

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.


Using Driver Verifier to identify issues with Windows drivers for advanced users

http://www.sevenforums.com/bsod-help-support/212996-bsod-copying-files-ntoskrnl-exe-7cc40.html
Relevancy 85.57%

Hello! I've been recieving reoccurring BSODs from 3d gaming. BlueScreenView reports that I've been getting ntoskrnl+7cc40. The bug check string is usually DRIVER_IRQL_NOT_LESS_OR_EQUAL, IQRL_NOT_LESS_OR_EQUAL, PAGE_FAULT_IN_NON_PAGED_AREA, and KMODE_EXCEPTION_NOT_HANDLED. I have tried updating all of my drivers, sfc /scannow, and chkdsk. None seems to work. I'm running a HP Pavilion dv4-2145dx, that's about 2-3 years old.

Specs:
- Windows 7 Home Premium 64bit (OEM)
- AMD Turion(tm) II Dual-Core Mobile M520
- ATI Mobility Radeon 4200 Series
- 4gb ram

attached is my bsod dmp and system file collection
Please help! thanks in advance!

A:Constant BSOD from 3d gaming, ntoskrnl+7cc40

Possible out of date drivers:
Code:
iirsp fffff880`01558000 fffff880`01569000 Tue Dec 13 14:47:54 2005 (439f418a) 00019fb9 iirsp.sys
nfrd960 fffff880`016cf000 fffff880`016df000 Tue Jun 06 15:11:48 2006 (4485ef94) 0000ffcb nfrd960.sys
adpu320 fffff880`01200000 fffff880`0122f000 Tue Feb 27 17:04:15 2007 (45e4c6ff) 0003588d adpu320.sys
adpahci fffff880`01397000 fffff880`013ed000 Tue May 01 11:30:09 2007 (46377921) 00058e0f adpahci.sys
arc fffff880`0149d000 fffff880`014b6000 Thu May 24 15:27:55 2007 (4656035b) 00017fb4 arc.sys
SiSRaid2 fffff880`019dd000 fffff880`019eb000 Wed Sep 24 12:28:20 2008 (48da86c4) 00011d5d SiSRaid2.sys
sisraid4 fffff880`01800000 fffff880`01818000 Wed Oct 01 15:56:04 2008 (48e3f1f4) 0001ec6b sisraid4.sys
adp94xx fffff880`0131c000 fffff880`01397000 Fri Dec 05 16:54:42 2008 (4939bf42) 0007c740 adp94xx.sys
lsi_fc fffff880`01569000 fffff880`01588000 Tue Dec 09 15:46:09 2008 (493ef531) 0001dc09 lsi_fc.sys
arcsas fffff880`014b6000 fffff880`014d1000 Wed Jan 14 12:27:37 2009 (496e3ca9) 0001f176 arcsas.sys
ql2300 fffff880`01839000 fffff880`019dd000 Thu Jan 22 16:05:06 2009 (4978fba2) 0017acdb ql2300.sys
vsmraid fffff880`01769000 fffff880`01793000 Fri Jan 30 18:18:57 2009 (4983a701) 00028def vsmraid.sys
elxstor fffff880`014d1000 fffff880`01558000 Tue Feb 03 15:52:11 2009 (4988ca9b) 0008214f elxstor.sys
stexstor fffff880`01818000 fffff880`01822000 Tue Feb 17 16:03:36 2009 (499b4248) 0000b026 stexstor.sys
hamachi fffff880`047f5000 fffff880`04800000 Thu Feb 19 03:36:41 2009 (499d3639) 0000a5d7 hamachi.sys
amdsbs fffff880`0144b000 fffff880`01492000 Fri Mar 20 12:36:03 2009 (49c3e213) 0003938a amdsbs.sys
lsi_scsi fffff880`0159b000 fffff880`015ba000 Thu Apr 16 16:13:50 2009 (49e7ad9e) 0002a7b5 lsi_scsi.sys
HpqKbFiltr fffff880`04a7f000 fffff880`04a8b000 Wed Apr 29 07:48:30 2009 (49f85aae) 00006ec8 HpqKbFiltr.sys
AtiPcie fffff880`02050000 fffff880`02058000 Tue May 05 09:00:22 2009 (4a005486) 000134c7 AtiPcie.sys
Apfiltr fffff880`04400000 fffff880`0443f000 Tue May 12 03:38:59 2009 (4a0943b3) 0003ca71 Apfiltr.sys
GEARAspiWDM fffff880`04a46000 fffff880`04a53000 Mon May 18 06:17:04 2009 (4a1151c0) 000159b4 GEARAspiWDM.sys
lsi_sas fffff880`01033000 fffff880`01050000 Mon May 18 18:20:23 2009 (4a11fb47) 000230a6 lsi_sas.sys
lsi_sas2 fffff880`01588000 fffff880`0159b000 Mon May 18 18:31:48 2009 (4a11fdf4) 0002002e lsi_sas2.sys
megasas fffff880`015ba000 fffff880`015c6000 Mon May 18 19:09:46 2009 (4a1206da) 000169a1 megasas.sys
ql40xx fffff880`0170a000 fffff880`01769000 Mon May 18 19:18:11 2009 (4a1208d3) 00029201 ql40xx.sys
MegaSR fffff880`0162b000 fffff880`016cf000 Mon May 18 19:25:54 2009 (4a120aa2) 00052e51 MegaSR.sys
Rt64win7 fffff880`04a0d000 fffff880`04a46000 Fri May 22 08:52:30 2009 (4a16bc2e) 00041606 Rt64win7.sys
enecir fffff880`045d9000 fffff880`045f6000 Sun Jun 28 20:17:30 2009 (4a48243a) 00019675 enecir.sys
iirsp.sys
nfrd960.sys
adpu320.sys
adpahci.sys
arc.sys
SiSRaid2.sys
sisraid4.sys
adp94xx.sys
lsi_fc.sys
arcsas.sys
ql2300.sys
vsmraid.sys
elxstor.sys
stexstor.sys
hamachi.sys
amdsbs.sys
lsi_scsi.sys
HpqKbFiltr.sys
AtiPcie.sys
Apfiltr.sys
GEARAspiWDM.sys
lsi_sas.sys
lsi_sas2.sys
megasas.sys
ql40xx.sys
MegaSR.sys
Rt64win7.sys
enecir.sys



Code:

Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [D:\Kingston\BSODDmpFiles\Vimicry\Windows7_Vista_jcgriff2\030712-31340-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Machine Name:
Kernel base = 0xfffff800`03257000 PsLoadedModuleList = 0xfffff800`0349c670
Debug session t... Read more

http://www.sevenforums.com/bsod-help-support/218102-constant-bsod-3d-gaming-ntoskrnl-7cc40.html
Relevancy 85.57%

BSOD at random times, seems to occur more often though, when referencing hard drive memory.
My first problem I need help with is when i try to access a .dmp file i get told something about symbols referencing the following:
ntoskrnl.exe ( nt+7cc40 )
any idea how to fix it?

A:random BSOD's and cant do .dmp ntoskrnl.exe ( nt+7cc40 ) problem

PS. sorry i am not following the exact rules regarding the whole .dmp file thing but i dont know how to do that...

http://www.sevenforums.com/bsod-help-support/208585-random-bsods-cant-do-dmp-ntoskrnl-exe-nt-7cc40-problem.html
Relevancy 85.57%

Hello I must admit I'm completely almost always BSOD, by multiple caused ntoskrnl.exe+7cc40 lost by now and need help The problem is I have this notebookl HP multiple BSOD, almost always caused by ntoskrnl.exe+7cc40 G -b SA Notebook PC Product Specifications HP G -b SA Notebook PC - HP Customer Care United States - English HP G -b SA and I'm getting random BSODs at completely random times Usually is happens after cold start I think I've tried everything hardware-related Memtest h test is ok hdd seems ok too SMART and HDtune machina was in servise center and they replaced mainboard But BSODs are still bumping up I'm running W Home Premium retail multiple BSOD, almost always caused by ntoskrnl.exe+7cc40 version hdd was wiped clean few moths ago so there are no HP quot goodies quot left From what I was able to find it seems like some sort of driver-memory related problem but right now I have no idea what to look for Also service center says in short quot hardware ok must be something in software you are using quot

A:multiple BSOD, almost always caused by ntoskrnl.exe+7cc40

I do not see any really questionable software. K-Lite could cause problems if it was corrupted; codec packages are somewhat worrisome when they get corrupted. Other than that, nothing out of the ordinary.

I did see an out of date driver: netr28x.sys which is your Ralink RT2860 series Wireless LAN Card (you may have a different manufacturer). Download the updated driver from the HP Support site, and use the following steps to re-install the update:

First, download the latest driver. Then do the next steps.
Click Start Menu
Right Click My Computer/Computer
Click Manage
Click Device Manager from the list on the left
Find the device you are trying to uninstall by expanding the appropriate set of devices
Right click the device
Click Uninstall (do not click OK in the dialog box that pops up after hitting Uninstall)
Put a tick in Delete driver software for this device (if this option is available, otherwise just hit OK) and hit OK
Restart your computer only if Windows asks you to.
Install the latest driver for the device.

Alternatively:Login as an adminstrative user.
First, download the latest driver. Then do the next steps.
Click Start Menu
Click Control Panel
Click Hardware and Sound
Click Device Manager (the last link under Devices and Printers)
Find the device you are trying to uninstall by expanding the appropriate set of devices
Right click the device
Click Uninstall (do not click OK in the dialog box that pops up after hitting Uninstall)
Put a tick in Delete driver software for this device (if this option is available, otherwise just hit OK) and hit OK
Restart your computer only if Windows asks you to.
Install the latest driver for the device.
Also, some of your crashes are indicating hard disk related problems. It may just be hard disk corruption, or maybe your hard disk was disconnected during transit.

The first thing to check is whether the hard disk is physically connected to the motherboard properly. To do so:Shut down and turn off the computer
Remove the AC Adapter
Remove the battery
Hold down the power button for 15-30 seconds to close the circuit and drain any residual power
Remove the panel on the underside of the laptop where the hard disk is housed
Remove and re-insert the hard disk by sliding it away from the connector and then gently but firmly pressing it back into the connector (no screws should need to be removed to do this step)
Replace the panel on the underside of the laptop to cover the hard disk
Replace the battery
Replace the AC Adapter
Turn on the computer and see how it responds
Post back once these steps have been implemented whether the system is stable. Sometimes these crashes can occur due to a loose connection.
Then run Disk Check with Automatically fix file system errors checked.

http://www.sevenforums.com/bsod-help-support/236905-multiple-bsod-almost-always-caused-ntoskrnl-exe-7cc40.html
Relevancy 84.71%

Hi I recently built a new rig for my friend using all brand new components and used ESD precautions throughout After a couple of days he called to say getting Blue Screens of Death He lives a little way away from me so I remoted in and installed Nirsoft Blue Screen View I have both attached and copied and pasted details from the crashes If I need the Mini Solved: Almost Crash : - Address Always BSOD ntoskrnl.exe+7cc40 Dump files I can get those I ran Memtest for half hour and no errors were detected - any ideas ------------ Dump File - - Solved: BSOD - Almost Always Crash Address : ntoskrnl.exe+7cc40 dmp Crash Time Bug Check String SYSTEM SERVICE EXCEPTION Bug Check Code x b Parameter c Parameter fffff c b Parameter fffff cc fd Parameter Caused By Driver ntoskrnl exe Solved: BSOD - Almost Always Crash Address : ntoskrnl.exe+7cc40 Caused By Address ntoskrnl exe cc File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win sp gdr - Processor x Crash Address ntoskrnl exe cc Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time Bug Check String NTFS FILE SYSTEM Bug Check Code x Parameter c a Parameter Parameter Parameter Caused By Driver Ntfs sys Caused By Address Ntfs sys d File Description Product Name Company File Version Processor x Crash Address ntoskrnl exe cc Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time Bug Check String NTFS FILE SYSTEM Bug Check Code x Parameter fb Parameter fffff a Parameter fffff e Parameter fffff f Caused By Driver Ntfs sys Caused By Address Ntfs sys a File Description Product Name Company File Version Processor x Crash Address ntoskrnl exe cc Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time Bug Check String BAD POOL HEADER Bug Check Code x Parameter Parameter fffff c d Parameter b Parameter b Caused By Driver win k sys Caused By Address win k sys c File Description Product Name Company File Version Processor x Crash Address ntoskrnl exe cc Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time Bug Check String SYSTEM SERVICE EXCEPTION Bug Check Code x b Parameter c Parameter fffff d a Parameter fffff ad d c Parameter Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe cc File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win sp gdr - Processor x Crash Address ntoskrnl exe cc Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time Bug Check String MEMORY MANAGEMENT Bug Check Code x a Parameter Parameter fffffa fc d Parameter ffff Parameter Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe cc File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win sp gdr - Processor x Crash Address ntoskrnl exe cc Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time Bug Check String SYSTEM SERVICE EXCEPTION Bug Check Code x b Parameter c Parameter fffff Parameter fffff e Parameter Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe cc File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win sp gdr - Processor x Crash Address nto... Read more

A:Solved: BSOD - Almost Always Crash Address : ntoskrnl.exe+7cc40

https://forums.techguy.org/threads/solved-bsod-almost-always-crash-address-ntoskrnl-exe-7cc40.1020658/
Relevancy 84.71%

Hi there, I have been having a long term issue with BSOD. I initially fixed my first string of BSODs due to my ram sticks being in the wrongs slots. That fixed it for about 3 months. But I just recently bought a new video card. GeForce GTX560ti. My older card being ati radeon 4850. I updated my drivers the other night to a beta driver for the Battlefield 3 beta. That is when I noticed 2 BSODs in 1 day. I'm attaching my mini dump folder in hopes that maybe I can find some technical support as I am not the most knowledgeable on computers. Any help will be grateful.
 

A:BSOD - 2 different Address : ntoskrnl.exe+7cc40 + anthrx.sys+5c8c1

Howdy,

Probably caused by : athrx.sys

Atheros network adapter driver

Try seeing if there are any updates for it.
 

https://forums.techguy.org/threads/bsod-2-different-address-ntoskrnl-exe-7cc40-anthrx-sys-5c8c1.1021685/
Relevancy 84.71%

Periodic BSOD about 2 times / day starting about 3 weeks ago.

Updated some out of date drivers last night but More BSOD today (although they look to be differnt errors)

Dump attached

A:BSOD when not in use (win7sp1_gdr.110622-1506) x64 ntoskrnl.exe+7cc40

mmb - used to get exactly what you are describing for weeks and weeks. If you have not made any other radical changes to the system, first try reseating all memory first then if you have more than 1 module, take one out and run with the other(s) until you find the culprit, turned out that one of my modules was bad - I just changed both and now no more BSODs. Used to drive me crazy !! Worth a try.

http://www.sevenforums.com/bsod-help-support/193104-bsod-when-not-use-win7sp1_gdr-110622-1506-x64-ntoskrnl-exe-7cc40.html
Relevancy 84.71%

Hi there,

I recently received my new rig (Alienware M14X), and have had persistent problems with it.

The main issue is that I get a BSOD every time I plug out the USB 2.0 cable running from my laptop to my Dell monitor, or sometimes when shutting the machine down.

I've tracked the error back to an issue with ntoskrnl.exe (+7cc40), but I also know this is quite a general issue.

I have tried multiple solutions (driver updating, etc), and System Restore seemed to solve this for a while, but it's happening again.

I've attached my .dmp files, and would love if someone could help on this.

Ivan

A:BSOD when removing USB 2.0 cable or shutting down, ntoskrnl.exe+7cc40

It's a hardware problem concerning the drivers for a camera connected to the computer made by Creative maybe a webcam or something of that nature. If you have a webcam please update the drivers or software for it from here: Creative Worldwide Support

Please fill in the rest of your system specs using the tool attached to this thread it will help us get better help for you.


Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [D:\Downloads\ivan\092111-27549-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*F:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Machine Name:
Kernel base = 0xfffff800`0301a000 PsLoadedModuleList = 0xfffff800`0325f670
Debug session time: Tue Sep 20 19:59:40.350 2011 (UTC - 6:00)
System Uptime: 0 days 4:05:52.224
Loading Kernel Symbols
...............................................................
................................................................
.......................................................
Loading User Symbols
Loading unloaded module list
...............
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {0, 2, 0, fffff8000309ad75}

Unable to load image \SystemRoot\system32\DRIVERS\CtClsFlt.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for CtClsFlt.sys
*** ERROR: Module load completed but symbols could not be loaded for CtClsFlt.sys
Probably caused by : CtClsFlt.sys ( CtClsFlt+156b )

Followup: MachineOwner
---------

6: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: 0000000000000000, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff8000309ad75, address which referenced memory

Debugging Details:
------------------
READ_ADDRESS: GetPointerFromAddress: unable to read from fffff800032c9100
0000000000000000

CURRENT_IRQL: 2

FAULTING_IP:
nt!KeSetEvent+1e3
fffff800`0309ad75 488b00 mov rax,qword ptr [rax]

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

BUGCHECK_STR: 0xA

PROCESS_NAME: System

TRAP_FRAME: fffff880037704a0 -- (.trap 0xfffff880037704a0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000000 rbx=0000000000000000 rcx=fffffa800c263a98
rdx=0000000000000001 rsi=0000000000000000 rdi=0000000000000000
rip=fffff8000309ad75 rsp=fffff88003770630 rbp=0000000000000000
r8=0000000000000000 r9=00000000000000a0 r10=00000... Read more

http://www.sevenforums.com/bsod-help-support/187959-bsod-when-removing-usb-2-0-cable-shutting-down-ntoskrnl-exe-7cc40.html
Relevancy 83.85%

Hello,

I constantly have BSOD's... when i watch the movie (avi, mkv) in any player (GOM, MPC-HC, Splash Pro...) and when i browsing internet (Firefox, Opera, Chrome, IE9).

I reinstalled Windows twice, even buy PCI network adapter, still same problem...
Already ran Memtest (6 passes 0 errors) and few of this dump files are when i ran Driver Verifier.

And yes, this problem started when i installed Service Pack 1, i don't know is that relevant..

My specs:
Asrock A770DE+
4 GB DDR2 Kingmax
MSI GTX460 Hawk
AMD Phenom ll X4 B50
Windows 7 Ultimate x64 SP1
Microsoft Security Essentials

Everything is in attachment.
Any help on this issue would be much appreciated.

Thank you in advance!

A:Random BSOD's, error 0x0000001e, 0a, caused by ntoskrnl.exe+7cc40

  
Quote: Originally Posted by zvone07


Hello,

I constantly have BSOD's... when i watch the movie (avi, mkv) in any player (GOM, MPC-HC, Splash Pro...) and when i browsing internet (Firefox, Opera, Chrome, IE9).

I reinstalled Windows twice, even buy PCI network adapter, still same problem...
Already ran Memtest (6 passes 0 errors) and few of this dump files are when i ran Driver Verifier.

And yes, this problem started when i installed Service Pack 1, i don't know is that relevant..

My specs:
Asrock A770DE+
4 GB DDR2 Kingmax
MSI GTX460 Hawk
AMD Phenom ll X4 B50
Windows 7 Ultimate x64 SP1
Microsoft Security Essentials

Everything is in attachment.
Any help on this issue would be much appreciated.

Thank you in advance!


8 different causes most pointing to hardware. If you are overclocking stop.

Please run these two tests to verify your memory and find which driver is causing the problem.
1-Memtest.

*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

RAM - Test with Memtest86+

2-Driver verifier






Quote:
I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.


Driver Verifier - Enable and Disable

http://www.sevenforums.com/bsod-help-support/194859-random-bsods-error-0x0000001e-0a-caused-ntoskrnl-exe-7cc40.html
Relevancy 83.85%

Hello my laptop is a HP dv originally with vista x OEM upgraded to seven pro x RETAIL with accademy program Upgrade done a year ago NEVER a problem never a BSOD Basically never problem with my laptot My (?) PC after caused random start by specially BSOD ntoskrnl.exe+7cc40 hardware is old but i never have problems with it I replaced only power charger and battery I'm random BSOD caused by ntoskrnl.exe+7cc40 (?) specially after start PC unable to run System Health Report with perfmon random BSOD caused by ntoskrnl.exe+7cc40 (?) specially after start PC report because i receive a timeout error doing it but i see that on C PerfLogs System Diagnostics i've all reports that i tried to do I'll attach it and also minidump folder Using Blue screen view i saw that BSOD SYSTEM SERVICE EXCEPTION are always caused by ntoskrnl exe File di Dump - - dmp Data e Ora del Crash Bug Check String SYSTEM SERVICE EXCEPTION Bug Check Code x b Parametro c Parametro fffff Parametro fffff c ea Parametro Causato Da Driver ntoskrnl exe Causato Da Indirizzo ntoskrnl exe cc Descrizione del File NT Kernel amp System Nome del Prodotto Microsoft Windows Operating System Societ Microsoft Corporation Versione del File win sp gdr - Processore x Crash Address ntoskrnl exe cc Stack Address Stack Address Stack Address Nome Computer Percorso completo C Windows Minidump - - dmp Processori Versione maggiore Versione minore Dimensioni file Dump I need help Thanks you

A:random BSOD caused by ntoskrnl.exe+7cc40 (?) specially after start PC

> Your crash was related to oodivd.sys DiskImage Virtual Disk Driver (Win32) from O&O Software GmbH dated 2/2009
Suggest you remove it to test.
NB, if critical update to newest
> Please remove any CD visualization programs such as Daemon Tools and Alcohol 120%.

They use a driver, found in your dmp, called sptd.sys, that is notorious for causing BSODs.

Use this SPTD uninstaller DuplexSecure - Downloads DuplexSecure - FAQ

On completion you can use this Freeware:

MagicISO Virtual CD/DVD-ROM (MagicDisc) in its place

Using MagicISO to create ISO image files

http://www.sevenforums.com/bsod-help-support/212682-random-bsod-caused-ntoskrnl-exe-7cc40-specially-after-start-pc.html
Relevancy 82.99%

I frequently get BSOD's at the same crash address (ntoskrnl.exe+7cc40) but with different bug strings:

IRQL_NOT_LESS_OR_EQUAL
SYSTEM_SERVICE_EXCEPTION
PAGE_FAULT_IN_NONPAGED_AREA
KMODE_EXCEPTION_NOT_HANDLED

I usually get it while actively using my computer. I have tried to reinstall windows but it still happens as well as updated all drivers. I have run memtest overnight with no issues as well. I have also reseated all my memory and video card as well.

OS: Windows 7 Premium x64
CPU: AMD Phenom?II X6 1100T Six-Core CPU w/ HyperTransport Technology
VIDEO: AMD Radeon HD 6950 2GB GDDR5 16X PCIe Video Card [+152] (Major Brand Powered by AMD)

Thank you so much for your help! I am grateful that there are experts that are willing to help out with computer issues.

Thanks,

Lam

A:BSOD while watching streams or playing video games, ntoskrnl.exe+7cc40

New crashes are attached. Does anybody have any fixes?

Thanks a ton!

http://www.sevenforums.com/bsod-help-support/202104-bsod-while-watching-streams-playing-video-games-ntoskrnl-exe-7cc40.html
Relevancy 82.99%

i keep getting BSOD when playing game new graphics i dont know where to start when its comes to BSOD stuff

110414-10576-01.dmp 11/4/2014 10:48:39 PM 0x00000124 00000000`00000000 fffffa80`0af318f8 00000000`00000000 00000000`00000000 ntoskrnl.exe ntoskrnl.exe+4a63cc NT Kernel & System Microsoft? Windows? Operating System Microsoft Corporation 6.1.7600.16385 (win7_rtm.090713-1255) x64 ntoskrnl.exe+4a63cc C:\Windows\Minidump\110414-10576-01.dmp 6 15 7600 262,144 11/4/2014 10:48:41 PM is some info i dont know what else yall need

A:0x00000124 ntoskrnl.exe ntoskrnl.exe+4a63cc BSOD Error runninganygame

Please Help

http://www.sevenforums.com/bsod-help-support/351242-0x00000124-ntoskrnl-exe-ntoskrnl-exe-4a63cc-bsod-error-runninganygame.html
Relevancy 76.54%

I've been having issues while gaming, mainly that my CPU will drop while I'm playing, which will cause HUGE FPS drops for a second or so.

Today I've been running a bunch of tests on my computer (using the intel one, anti-virus stuff, etc). I opened a program and went to message a friend and my computer blue screened giving me the 0x00000124 Error.

CPU drops while gaming, causes major FPS drops (goes down to <5 for 1-5 seconds). - Gaming - CPUs

I have a lot of info in this thread, but I'm more than willing to answer any questions or provide things too.

A:Been having CPU issues, trying to figure fix, sudden BSOD 0x00000124

Our BSOD Team will need this tutorial completed and posted.

Blue Screen of Death (BSOD) Posting Instructions

http://www.sevenforums.com/bsod-help-support/375689-been-having-cpu-issues-trying-figure-fix-sudden-bsod-0x00000124.html
Relevancy 76.54%

Hi Wondering having too much BlueScreen at my Windows After Installing the New OS Past about Week a Ago I must add this statement which i even have BSOD during watiching Youtube forExample No Heavy Process The Common Reason watching BlueScreenView is Hal dll and ntoskrnl exe x As i searched about these days it caused by drivers mostly but i do have most updated drivers Run the Intel Update Program Noting is needed to Update Now im posting this there is just a SM Bus Drivers Listed warning 0x00000124 BSOD [ntoskrnl.exe] [hal.dll] in Device Manager outdated but i did update that before but when i Did a Restore Point BSOD 0x00000124 [hal.dll] [ntoskrnl.exe] again Gone on a Warning Section Also Some Drivers Are OutDated Like The Picture Below I will Update them all Specification MainBoard Asus z - Deluxe VGA MB ATI AMD Radeon HD Series Sapphire PCPartner RAM GB Dual-Channel DDR MHz CPU Intel Core i K GHz OS Windows Pro -bit In Searches i had it came a common problem in asusz and intel isnt The LOG is Uploaded and Attached thanks for Response hope it will be Ok

A:BSOD 0x00000124 [hal.dll] [ntoskrnl.exe]

Code:
7: kd> .bugcheck
Bugcheck code 0000009F
Arguments 00000000`00000003 ffffe001`2639b470 ffffd000`c6daa960 ffffe001`28470bc0

7: kd> !devstack ffffe0012639b470
!DevObj !DrvObj !DevExt ObjectName
ffffe00128c2f050 \Driver\pctNdisMP ffffe00128c2f1a0 InfoMask field not found for _OBJECT_HEADER at ffffe00128c2f020

> ffffe0012639b470 \Driver\PnpManager 00000000 Cannot read info offset from nt!ObpInfoMaskToOffset

!DevNode ffffe0012639a010 :
DeviceInst is "ROOT\S4E_PCTNDISMP\0005"
ServiceName is "pctNdisMP"

7: kd> lmvm pctNdis64
start end module name
fffff801`18c00000 fffff801`18c16000 pctNdis64 T (no symbols)
Loaded symbol image file: pctNdis64.sys
Image path: \SystemRoot\system32\DRIVERS\pctNdis64.sys
Image name: pctNdis64.sys
Timestamp: Wed Jul 07 22:37:30 2010 (4C34F39A)
CheckSum: 0001D422
ImageSize: 00016000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4


Your PC Tools internet security driver is almost 5 years old, bound to cause problems.
I suggest you remove the internet security package altogether.


Code:
Descriptor @ ffffe000be7f2138
Section @ ffffe000be7f22c0
Offset : 664
Length : 264
Flags : 0x00000000
Severity : Fatal

Error : DCACHEL0_WR_ERR (Proc 3 Bank 1)
Status : 0xbf80000000000124
Address : 0x00000001a8cb2a00
Misc. : 0x0000000000000086

+0x000 McaErrorCode : 0x124 // 0000 0001 0010 0100


A generic write error on the level 0 cache of processor #3, memory bank 1.
This is consistent in this specific memory bank, menaing it's almost certainly a failing CPU.
If it's under warranty then now is the time to RMA it.

http://www.eightforums.com/bsod-crashes-debugging/62500-bsod-0x00000124-hal-dll-ntoskrnl-exe.html
Relevancy 76.54%

I've been getting BSOD very consistently over the past few days. I've attached my SF Diagnostic Tool ZIP. According to BlueScreenView, these are the culprits that are reported for the crash:

hal.dll+12a3b
ntoskrnl.exe+18cb03

I can't seem to find any consistency to when it crashes. Sometimes it does it while I'm working on things (Outlook, Chrome, EditPlus, Excel, etc.). Sometimes it does it when I'm not even at the computer. It does seem to be getting more frequent though.

I don't overclock.
I haven't changed any hardware for about a year now.
I'm currently in the process of making sure all my drivers are up to date.

Please let me know if there is anything else I can supply to help figure this out.

Thanks in advance for all of your help.

A:BSOD 0x00000124 Not sure of cause. hal.dll, ntoskrnl.exe

A "stop 0x124" is fundamentally different to many other types of bluescreens because it stems from a hardware complaint. Stop 0x124 minidumps contain very little practical information, and it is therefore necessary to approach the problem as a case of hardware in an unknown state of distress. You can read more on this error and what to try here... Stop 0x124 - what it means and what to try: Stop 124 - What it means and what to try

http://www.sevenforums.com/bsod-help-support/308996-bsod-0x00000124-not-sure-cause-hal-dll-ntoskrnl-exe.html
Relevancy 76.11%

hello forum i just wanted to share the findings regarding my BSOD error symptoms to get assistance with troubleshooting you should follow the instructions given in http www sevenforums com crashes-d tructions html however as very basic initial steps i personally prefer this approach create a bootable CD for memtest from Memtest - Advanced Memory Diagnostic Tool and let it run for hours if there is just one single error it means your memory is definitely bad if there are no errors your memory is quot most likely quot OK get a copy of BlueScreenView from NirSoft - freeware utilities password recovery system utilities desktop utilities to easily read the crash dumps on my system i was getting sporadic BSOD crashes - each time random stop codes including DRIVER IRQL NOT LESS OR EQUAL IRQL NOT LESS OR EQUAL KMODE EXCEPTION NOT HANDLED MEMORY MANAGEMENT PAGE FAULT IN NONPAGED AREA PFN [SOLVED] BSOD "ntoskrnl.exe+7cc40" random around LIST CORRUPT POOL CORRUPTION IN FILE AREA SYSTEM SERVICE EXCEPTION SYSTEM THREAD EXCEPTION NOT HANDLED i wasn't able to make out any pattern the only thing in common was the crash address that would always be quot ntoskrnl exe cc quot in many cases the crash dumps will indicate a particular driv r to be causing the trouble but with my system this was not the case by coincidence i had identified a pattern how to reproduce a BSOD by doing certain actions in a pre-defined sequence so this would allow me to proceed with systematic troubleshooting in the end it turned out [SOLVED] random BSOD around "ntoskrnl.exe+7cc40" i was using some defective RAM - or quot strange quot RAM at least it took me quite a while because [SOLVED] random BSOD around "ntoskrnl.exe+7cc40" of the following reasons BSOD seemed to occur randomly sporadically BSOD was showing random stop codes memtest did not show any erros conclusion i would recommend the following approach use memtest to check if there are any quot obvious quot errors with your RAM use BlueScreenView to check if any device driv r seems to be causing the error in case you're getting quot random quot errors like me as outlined above take one more closer look at your RAM in case this still doesn't get you any further follow the posting [SOLVED] random BSOD around "ntoskrnl.exe+7cc40" instructions to attach the required files the guys on this forum are doing a great job and will most likely be able to point you in the right direction for additional troubleshooting cheers francoiste

A:[SOLVED] random BSOD around "ntoskrnl.exe+7cc40"

my memory was showing these strange symptoms due to physical damage.
please see the <attached picture>.

if you look at the photograph it appears just so obvious.
but believe me, you won't detect it with your bare eyes.
you need either a magnifying glass or (as in my case) a high-end photographic camera with super zoom.

note: i'm not sure if this damage was there right from the beginning (DOA) or caused by my excessive testing (adding, removing, swapping the memory modules endless times).

anyhow,
so what's the message?

first: be very careful when inserting your memory modules into the slots.
some brands / modules don't have a very robust design, obviously.

second: the scary part is that neither memtest nor windows detected any errors when doing a memory validation.
the only visible symptoms: the physical damage led to sporadic errors (blue screens) during regular operation.
so it's still very difficult to tell whether a memory module is 100% OK or just 99% OK ...
cheers, francoiste

http://www.sevenforums.com/bsod-help-support/190800-solved-random-bsod-around-ntoskrnl-exe-7cc40.html
Relevancy 75.68%

I've cleaned my computer with an air compressor within the last week and I have no overclocking. CPU temps are on idle at around 30C and I've never seen GPU temps above 60C when I run World of Warcraft.

But I still get BSOD 0x00000124 sometimes...

Thanks for any help.

Relevancy 75.68%

Hi,

My ASUS laptop (i5-450M, 4GB, NVIDIA Geforce 310m) has several DSOD (0x00000124) daily
Please help me to determine the cuase of this crash.

Thank you

ssamnang

A:BSOD 0x00000124 cause by ntoskrnl.exe+80640

Code:
BugCheck 124, {0, fffffa8005153028, ba000000, 400405}

Probably caused by : GenuineIntel

Code:
Usual causes: Hardware, Incompatibility, May be driver corruption

Code:
===============================================================================
Section 2 : x86/x64 MCA
-------------------------------------------------------------------------------
Descriptor @ fffffa8005153138
Section @ fffffa80051532c0
Offset : 664
Length : 264
Flags : 0x00000000
Severity : Fatal

Error : Internal unclassified (Proc 0 Bank 5)
Status : 0xba00000000400405
The first parameter or argument has the value of 0x0, which is a Machine Check Exception, which means the CPU has detected a hardware problem and the address points to a processor error because the CPU has found one, so it could be a different form of hardware which is causing the issue.

Update:


Code:
0: kd> lmvm igdkmd64
start end module name
fffff880`04846000 fffff880`05269040 igdkmd64 T (no symbols)
Loaded symbol image file: igdkmd64.sys
Image path: igdkmd64.sys
Image name: igdkmd64.sys
Timestamp: Thu Oct 13 20:05:43 2011 (4E973687)
CheckSum: 00A2C5BD
ImageSize: 00A23040
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Your Intel graphics card driver seems to be a possible cause, please check for updates from here - Intel? Driver Update Utility

Furthermore, since a Stop 0x124 is a hardware related BSOD, then I would suggest testing the CPU CPU - Stress Test Using IntelBurnTest I'm sure the Intel graphics card is either integrated into the CPU or the motherboard.
Stop 0x124 - what it means and what to try
All the hardware seeming to be running stable and tests reporting no errors, could mean a bad motherboard.

-----------------------------------------------------------

Side Notes:

These steps are not strictly related to the BSOD, but are highly recommended steps to improve your system.

Install and perform full scans with:Malwarebytes : Free anti-malware download
Microsoft Security Essentials | Protect against viruses, spyware, and other malware


   Information
Remember to install the free version of Malwarebytes not the free trail; untick the free trial box during installation. MSE is the most lightweight and compatible with the Windows 7 operating system

You can also view this thread for a complete free and lightweight security protection combination:Good and Free system security combination.
You appear to have only 26 Windows Updates installed, whereas, I have 205 Windows Updates, please install all the Important and Recommended Windows Updates for your system. These will bring many stability and performance improvements to the operating system, but most importantly will also improve the security of your system.Start
Type: Windows Update
Check for Updates/Install Updates
Reboot (if prompted)

http://www.sevenforums.com/bsod-help-support/294065-bsod-0x00000124-cause-ntoskrnl-exe-80640-a.html
Relevancy 75.68%

Just today when I got home from work and turned on my PC it started freezing just this morning it was working fine ive had random restarts before but rarely like maybe once or twice a month This problem BSOD 0x00000124 error ntoskrnl.exe, first started out by just freezing can't move mouse or anything holding power button don't work either so have to shut the power switch It now seems to either BSOD or freeze whenever I boot normally and sometimes the BSOD doesnt even make a dmp I either freeze BSOD ntoskrnl.exe, error 0x00000124 BSOD on the welcome screen or after a few min when the desktop comes up Safe mode works fine though as I am also in it now to post this and I have tried system restore to no avail I've tried testing my RAM sticks by moving them to different slots and testing one at a time and still same problem persists One forum mentioned video drivers so i uninstalled mine and still nothing I went to try windows repair but i get some error message saying the utility doesn't match my version not sure why as its the same disc I used to install with I would normally just re-format and install but a few forums mention that not working so I got a little more worried and am now coming to here to see what you guys think I BSOD ntoskrnl.exe, error 0x00000124 read initial post and ran the file collection app and have the zip uploaded One note though the system health report would not work just gave me an error screen maybe because im in safe mode but like I said can't leave it or I will freeze My basic system specs are below thanks for taking the time to read this and hope you can solve it Windows Pro bit got it from my computer courses in college as we part of some partnership with microsoft GB RAM x GB sticks AMD FX -core CPU GHz Nvidia GTX Ti ASUS Sabertooth MB This rig I built in March and ran fine until today Windows I had for over a year same disc just reinstalled

A:BSOD ntoskrnl.exe, error 0x00000124

It does not appear you let the jcgriff2 utility run to completion. It sometimes appears it is not doing anything when it actually is, so do not stop it. Go get a cup of coffee or a meal while you wait.

Analysis:BugCheck 0x124
You have a 0x124 hardware bugcheck. If the system is still under warranty, I would recommend sending it in to have diagnostic tests done and any bad hardware replaced.



   Warning
Before you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. WARNING: The steps that follow can void your warranty!!!

For your hardware stop 0x124 crash, read through Stop 0x124 - what it means and what to try and use the following hardware checks to supplement that link.
If you are overclocking any hardware, please stop.

If you have an SSD, make sure the following are up to date:SSD firmware
BIOS Version
Chipset Drivers
Hard disk controller drivers/SATA drivers
If you have a Marvell IDE ATA/ATAPI device, make sure the drivers are up to date from the Intel site or Marvell site and not from your motherboard/vendor support site.

Run all but the advanced tests with SeaTools for HDDs.SeaTools for Windows

SeaTools for DOS
Monitor temperatures during the following tests. Use the following programs to monitor the temperatures. Real Temp is a good CPU temperature monitor.
Speccy - System Information - Free Download will monitor all hardware temperatures.
HWiNFO, HWiNFO32 & HWiNFO64 - Hardware Information and Analysis Tools can be inaccurate for CPU temperatures, but is a good program for GPU temperature monitoring.
Use FurMark: VGA Stress Test, Graphics Card and GPU Stability Test, Burn-in Test, OpenGL Benchmark and GPU Temperature | oZone3D.Net to test the graphics card GPU. Let it run until the GPU temperatures even out or until the GPU temperatures reach a dangerous level (you can find the max temperature for your card on either the nVidia or AMD sites; if you are not sure, ask us). The goal is to get a steady temperature, find out if the GPU is overheating, or to see if there are any artifacts present in the test itself: look for strange pixelated patterns on the screen or colors that do not look like they belong. Then use the |MG| Video Memory Stress Test 1.7.116 Download to test your graphics card memory. Let the memory test run for at least seven passes; the more the better.

Run Hardware - Stress Test With Prime95 to determine any hardware problems. Run all three tests for a few hours each. If you get errors, stop the test and post back here.

Follow the steps for doing CPU stress test using IntelBurnTest

Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).

For Part 3: If You Have Errors: If you swap any memory components, follow these steps for ESD safety:Shut down and turn off your computer.
Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working. If you do not have an anti-static workbench, desk, or pad, you can use your computer tower/case by finding a metal hold in it, su... Read more

http://www.sevenforums.com/bsod-help-support/239783-bsod-ntoskrnl-exe-error-0x00000124.html
Relevancy 75.68%

So i got this bsod when playing. Had this same issues many times when installed OS and thought it is driver issue or something. Reinstalled OS and had bsod again.
New hardware is cpu what i installed, never had bsod on old prosessor

Did check temps with Coretemp while playing and didnt get even over 50?.

Did run memtest last night with 5 passes without errors and Furmark for GPU with 75? max.
Any compatibility issues or something with new cpu with Memory or something. Please help

http://www.sevenforums.com/bsod-help-support/388688-bsod-when-playing-0x00000124-hal-dll-ntoskrnl-exe.html
Relevancy 74.82%

Earlier I was Using Windows 7 ultimate X64bit. I had no problem at all. Recently I bought windows 8 pro.
Now I am getting this BSOD ERROR 0x00000124(ntoskrnl.exe+52a489).
No matter what I do .I keep getting this error. i enabled verifier. I Did Scannow through CMD. I cleaned my registry. Even I installed several fresh installation of windows. But No Hope. I Read tons of solution on net but nothing seems to be working. Now my pc is shutting down after 10 or 15 minutes regularly .and every time SAME error. I thought it was my BIOS therefore I revert back to older version(on which I never faced any problem using windows 7). I also installed Windows 7 again but No Hope again. This Rate I'll damage something on my computer. I can't do anything because of this BSOD error.
I am enclosing everything as per forum Rule.
Please Help me. I am in real trouble.

A:BSOD ERROR 0x00000124(ntoskrnl.exe+52a489)

Please some look after it. My pc is crashing after regular events. Is there any other information which I can provide so that you guys can make better explanation that what is going on with my computer.

http://www.eightforums.com/bsod-crashes-debugging/13521-bsod-error-0x00000124-ntoskrnl-exe-52a489.html
Relevancy 74.82%

Game crashes during gameplay (most notably The Old Republic) but also in other situations (Photoshop CS4 plugin HDR Effex Pro).

Windows 7 64 bit Ultimate
Asus Formula Crosshair IV MB
16GB Corsair DDR3 1333 GHz
580 GTX nVidia
160GB SSD
2 TB WD HD
Corsair GS800 power supply

I've been having this issue with various games, with varying frequency. Batman Arkham Asylum, Skyrim, Mass Effect, and most notably The Old Republic. ToR crashed multiple times today (see minidump attachment.) Also, using Nik Effex HDR Effex Pro (a CS4 plugin) has elicited this BSOD.

Any comments and suggestions would be greatly appreciated.

Thanks,

Alendi

A:BSOD: 0x00000124; ntoskrnl.exe+4b16cc - during gaming, mostly

Hi.
You have the Stop 0x124 error.
Stop 0x124 - what it means and what to try

http://www.sevenforums.com/bsod-help-support/205108-bsod-0x00000124-ntoskrnl-exe-4b16cc-during-gaming-mostly.html
Relevancy 74.82%

Hello, I have been having a BSOD problem for a while now and i have figured out it is caused by ntoskrnl.exe. This BSOD has been going on since April when I built my PC. I have already completely replaced my RAM, done a full virus scan, and checked to make sure there are no overclocks on any hardware. It usually happens when gaming, but sometimes it will happen randomly (like when web browsing and other applications). Please help.

Thanks!

http://www.sevenforums.com/bsod-help-support/383758-bsod-stop-0x00000124-caused-ntoskrnl-exe.html
Relevancy 73.96%

Hello sevenforums.
My PC has always given me trouble in the past by randomly restarting and getting BSODed. I used to "live with it" but over last 2-3 months it has gotten out of hand. My PC restarts at least 2-3 times per day. I always get 0x124 bug check code and so tested the processor with prime95 (for 2-3 hours) and ram with memtest86+(3 passes) but got clean results. I've attached the latest 10 minidumps. I'm at my wits end and REALLY dont want to reinstall windows! :O
Thanks in advance.
Edit: It does not even show a bsod but directly reboots.

A:Random frequent BSOD 0x124 / 0x00000124 ntoskrnl.exe?

Minidumps attached

http://www.sevenforums.com/bsod-help-support/273895-random-frequent-bsod-0x124-0x00000124-ntoskrnl-exe.html
Relevancy 73.96%

Hi guys Having BSOD issues I thought initially it was scaned from hardware issue maybe loose connectors but my build is less than days old and i've reseated all parts about days ago It didnt BSOD for days but today it BSOD while browsing the internet the next - attached dump ntoskrnl.exe BSOD 0x00000124 caused by - BSOD was when trying to hardware scan device manager so I know it must be caused from some files inside my OS and not hardware BSOD - 0x00000124 - caused by ntoskrnl.exe dump attached It has happened in gaming before I've attached the dump file but theres a lot of dumps becuase of BSOD i've had so far caused by ntoskrnl exe I will be trying driver sweeper to remove graphic card drivers then reinstalling them maybe that will help Looking forward to any expert help on this matter thank you I think most recent dump file is - - dmp All temps are fine CPU hasnt gone above c when playing games I've been monitoring with HW monitor I did overclock once but it wasnt BSOD - 0x00000124 - caused by ntoskrnl.exe dump attached sustainable so I reset to stock a while BSOD - 0x00000124 - caused by ntoskrnl.exe dump attached back so I'm NOT OC'd now

A:BSOD - 0x00000124 - caused by ntoskrnl.exe dump attached

Hi Saltychip.

We nave noticed that sometimes the absence of Service Pack 1 causes stop 0x124 BSODs (though it is basically a hardware related BSOD).

Install Service pack 1 and all other windows updates. Otherwise the system will remain vulnerable to threats.

Code:
Windows 7 Kernel Version 7600 MP (6 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Learn how to install Windows 7 Service Pack 1 (SP1)
Service Pack and Update Center - Microsoft Windows

If it continues to BSOD in the same way even after installing the Service Pack 1, we will go for further troubleshooting.
________________________________________________________________________________________

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 124, {0, fffffa8008c13788, 0, 0}

Probably caused by : AuthenticAMD

Followup: MachineOwner
---------

http://www.sevenforums.com/bsod-help-support/312673-bsod-0x00000124-caused-ntoskrnl-exe-dump-attached.html
Relevancy 73.96%

Hello everyone, I am new to this forum .
For some weeks I switched to Windows 10 , and ever since I installed it gives me constant BSOD , I have not done any overclocking on the CPU . I tried several diagnostic programs , memtest , fun mark and I could not understand what the problem is , I just can not figure out what it is due , I am attaching the dmp file.
Thank you in advance for your answers and , looking forward .
Goodbye and have a nice day!!

http://www.tenforums.com/bsod-crashes-debugging/49792-windows-10-frequently-bsod-hal-dll-ntoskrnl-exe-stop-0x00000124.html
Relevancy 73.96%

Been getting infrequent BSOD errors on my Windows 10 PC (Home edition).

I had a look on BlueScreenView, seems like a lot of the bugcheck BSOD is ntoskrnl related but I can't work out if it's hardware related or some bad driver somewhere.
The computer is 9 months old, custom built gaming PC.Temperatures are low <60C at load, <30C at idle (waterblock cooling on CPU)System is stable when gaming, a lot of the BSOD is happening at idle. (I leave my PC running all the time)The OS was upgraded from Windows 8.1 to Windows 10 in late 2015.System felt more stable under Windows 8.1, not really experienced many BSOD under Win8.1I have tested the memory with 10 successful passes (12 hrs).Have run DirectX diagnostics and cyclic Heaven/Valley benchmarks - no crash.

A:Random BSOD (Windows 10) ntoskrnl/0x00000124 bugcheck

Sorry, zip file attached with the diagnostics from DM Log Collector

UNSC-CORTANA-Thu_04_28_2016_180201_69.zip

http://www.tenforums.com/bsod-crashes-debugging/48609-random-bsod-windows-10-ntoskrnl-0x00000124-bugcheck.html
Relevancy 73.96%

Hi guys Having BSOD issues I thought initially it was scaned from hardware issue maybe loose connectors but my build is less than days old and i've reseated all parts about days ago It didnt BSOD for days but today it BSOD while browsing the internet the next BSOD was when trying to hardware scan device dump attached ntoskrnl.exe - BSOD caused 0x00000124 - by manager so I know it must be caused from some files inside my OS and not hardware I've attached the dump file but theres a lot of dumps becuase of BSOD i've had so far BSOD - 0x00000124 - caused by ntoskrnl.exe dump attached caused by ntoskrnl exe I will be trying driver sweeper to remove graphic card drivers then reinstalling them maybe that will help Looking forward to any expert help on this matter thank you I think most recent dump file is - - dmp All temps are fine CPU hasnt gone above c when playing games I've been monitoring with HW monitor I did overclock once but it wasnt sustainable so I reset to stock a while back so I'm NOT OC'd now

A:BSOD - 0x00000124 - caused by ntoskrnl.exe dump attached

Hi

Please update your thread with a "Speccy" snapshot.

Publish a Snapshot using Speccy - Internet Applications Mini-Guides

http://www.eightforums.com/bsod-crashes-debugging/36037-bsod-0x00000124-caused-ntoskrnl-exe-dump-attached.html
Relevancy 73.96%

So I have a problem with this error.

I updated all drivers
Also updated motheboard.
I tested memory with memtest- no errors
Tested hard drive with many programs and no errors or problems.

Do not know what to do. most commonly get this problem when playing games.
But my video drivers are updated with latest updates. CPU temperature and VGA is normal.

OS Microsoft Windows 7 Ultimate
Motherboard ASRock P5B-DE
CPU Type QuadCore Intel Core 2 Quad Q6600, 2400 MHz
VGA ATI Radeon HD 4890 (RV790)
Disk Drive SAMSUNG HD403LJ ATA Device (400 GB, 7200 RPM, SATA-II)
Memory Patriot Memory 4 GB DDR2-667 SDRAM

attaching - system health report,Windows_NT6_BSOD_v3.03, and dump file.

Please help to solve this problem.
Thank you

A:BSOD 0x00000124 error (hal.dll+5ba9 and ntoskrnl.exe+c4085)

You are getting a error that is exclusively linked to bad hardware or a improper overclock.
There really isn't a whole lot of other things that produce the error you are getting.

Stop 0x124 - what it means and what to try


Code:
Probably caused by : hardware

Followup: MachineOwner
---------

1: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 00000000, Machine Check Exception
Arg2: 863d5024, Address of the WHEA_ERROR_RECORD structure.
Arg3: 00000000, High order 32-bits of the MCi_STATUS value.
Arg4: 00000000, Low order 32-bits of the MCi_STATUS value.

Debugging Details:
------------------
BUGCHECK_STR: 0x124_GenuineIntel

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

PROCESS_NAME: System

CURRENT_IRQL: 0

STACK_TEXT:
80eb3cc4 8290b085 863d5008 829a5c08 829a5c00 nt!WheapCreateTriageDumpFromPreviousSession+0x32
80eb3ce4 8290beaf 829a5c00 863d5008 829a5c30 nt!WheapProcessWorkQueueItem+0x56
80eb3d00 828a2153 829a5c00 00000000 85173798 nt!WheapWorkQueueWorkerRoutine+0x1f
80eb3d50 82a2f46a 00000001 a86a2daf 00000000 nt!ExpWorkerThread+0x10d
80eb3d90 828d0979 828a2046 00000001 00000000 nt!PspSystemThreadStartup+0x9e
00000000 00000000 00000000 00000000 00000000 nt!KiThreadStartup+0x19
STACK_COMMAND: kb

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: hardware

IMAGE_NAME: hardware

DEBUG_FLR_IMAGE_TIMESTAMP: 0

FAILURE_BUCKET_ID: 0x124_GenuineIntel_PROCESSOR_BUS_PRV

BUCKET_ID: 0x124_GenuineIntel_PROCESSOR_BUS_PRV

Followup: MachineOwner
---------

http://www.sevenforums.com/bsod-help-support/187966-bsod-0x00000124-error-hal-dll-5ba9-ntoskrnl-exe-c4085.html
Relevancy 73.96%

I'm having this BSOD since months ago and I can't find a good solution Sometimes I can use my computer for over 0x00000124 8.1 Windows ntoskrnl.exe BC Random Code BSOD a month with no issues playing everyday for hours browsing the web etc But sometimes like today I get BSOD's on the same day playing for example Final Fantasy XIV ARR I tried Random BSOD BC Code 0x00000124 ntoskrnl.exe Windows 8.1 many things before like Memtest Cpu test etc and I can't understand if my Hardware is the problem or some driver I also have an after market Cpu Cooler so my temps are fine and my case has really good ventilation I uploaded this dumps a few days ago after I used Driver Veryfier I got a C BC Code error on those Minidumps and the problem was nroskrnl exe Only with Driver Veryfier I'm able to reproduce this BSOD is always random when I'm just using my computer I uploaded those dumps here https mega co nz F NlwYbT eaXDPO NYw z Mxt S Y I uploaded my latest dumps on this post using the SF Diagnostics Tool any advice would be much appreciated Edit with my specs Computer typePC DesktopComputer Manufacturer Model NumberCustom Build OSWindows bit CPUi k stock MotherboardGigabyte Z -D HP MemoryKingston HyperX GB DD Graphics Card s GTX GB Gigabyte Hard DrivesSeagate Barracuda RPM MB

A:Random BSOD BC Code 0x00000124 ntoskrnl.exe Windows 8.1

Uploaded my latest BSOD.. any advice will be much apreciated

http://www.eightforums.com/bsod-crashes-debugging/47745-random-bsod-bc-code-0x00000124-ntoskrnl-exe-windows-8-1-a.html
Relevancy 73.96%

So I have a problem with this error.

I updated all drivers
Also updated motheboard.
I tested memory with memtest- no errors
Tested hard drive with many programs and no errors or problems.

Do not know what to do. most commonly get this problem when playing games.
But my video drivers are updated with latest updates. CPU temperature and VGA is normal.

OS Microsoft Windows 7 Ultimate
Motherboard ASRock P5B-DE
CPU Type QuadCore Intel Core 2 Quad Q6600, 2400 MHz
VGA ATI Radeon HD 4890 (RV790)
Disk Drive SAMSUNG HD403LJ ATA Device (400 GB, 7200 RPM, SATA-II)
Memory Patriot Memory 4 GB DDR2-667 SDRAM

attaching - system health report,Windows_NT6_BSOD_v3.03, and dump file.

Please help to solve this problem.
Thank you

A:BSOD 0x00000124 error (hal.dll+5ba9 and ntoskrnl.exe+c4085)

How long did you run memtest86+? It should be at least 7 passes.

Though I doubt the memory is the case. All crashes show an issue regarding CPU's L0 internal bus. You may wanna run Prime95 for about 9+ hours. If it shows up errors, or crashes, you can bet you have an issue with your CPU. I'm not sure what temps you have on it that are 'normal', but they might be too high; don't forget that overclocking it will cause this issue as well. The consistency leads me to believe the CPU itself is just bad, as OCing or temp problems typically lead to erratic CPU probs, but it really depends. Best to check with Prime95 first.

http://www.techsupportforum.com/forums/f299/bsod-0x00000124-error-hal-dll-5ba9-and-ntoskrnl-exe-c4085-602013.html
Relevancy 73.1%

Hello everybody I just have this custom PC BSOD hal.dll+12a3b x64, error Windows 0x00000124 ntoskrnl.exe+748c0 for Home use I have used it around a month The PC had worked very good but weeks ago my wife had to use it for children's homework Just when she logged into her user account the BSOD appeared after around seconds the BSOD disappeared an the PC automatically restarted So she was into this loop until I told her to force shut down When I was home I ran Windows into Safe Mode and there everything was ok I thought it could BSOD Windows x64, error 0x00000124 hal.dll+12a3b ntoskrnl.exe+748c0 be a problem of RAM memory or maybe a faulty HDD I tested the RAM for about minutes and everything was ok tested the HDD with HD Sentinel software all the tests were perfect SMART indicators are also OK as expected of a nearly new HDD I think its a problem of drivers the PC has BSOD Windows x64, error 0x00000124 hal.dll+12a3b ntoskrnl.exe+748c0 a ZOGIS GT- Pci-Ex card but the mainboard Gygabyte B M-D V has its own Video Chip that is disabled on the BIOS Then I disabled the Pci-Ex and enabled the internal Video card but the result was the same BSOD Other peripherals used are a Genius USB Facecam and an EPSON L printer both are now BSOD Windows x64, error 0x00000124 hal.dll+12a3b ntoskrnl.exe+748c0 disconnected of the PC Please let me know what more can I do or how to test the drivers I will post any news here Thanks for your help in advance

A:BSOD Windows x64, error 0x00000124 hal.dll+12a3b ntoskrnl.exe+748c0

Basically a 0x00000124 is a hardware issue; but it may be caused by anything and everything associated with the computer.

The crash dumps provide very less information in the 0x00000124 dumps. And there is only one crash dump which is unfortunately having symbol error and so I failed to read it properly.

Anyway, a single BSOD may always be treated as a glitch. If the issue continues, let us see the further dumps ... if they provide any little more info there.

http://www.sevenforums.com/bsod-help-support/374407-bsod-windows-x64-error-0x00000124-hal-dll-12a3b-ntoskrnl-exe-748c0.html
Relevancy 73.1%

Generous experts,

I am getting somewhat random, though more often on "wake-up" BSOD. It seems that it may be related to the cpu, as the event view states:
A fatal hardware error has occurred.

Reported by component: Processor Core
Error Source: Machine Check Exception
Error Type: Cache Hierarchy Error
Processor ID: 2

The details view of this entry contains further information.I am moderately tech savvy, but this is beyond my skill level. I have searched this forum and web for a solution, and did not find any that were quite close enough - at least by my viewing.

Any suggestions would be very much appreciated

Thank you!

A:BSOD on wake-up error 0x00000124, driver hal.dll, address ntoskrnl.exe

Code:
BugCheck 124, {0, fffffa80078c6028, bf800000, 124}
You are having 0x124 bugchecks which indicate a fatal hardware error has occurred.


Code:
2: kd> !errrec fffffa80078c6028
===============================================================================
Common Platform Error Record @ fffffa80078c6028
-------------------------------------------------------------------------------
Record Id : 01cf84f0d193612a
Severity : Fatal (1)
Length : 928
Creator : Microsoft
Notify Type : Machine Check Exception
Timestamp : 6/10/2014 21:15:27 (UTC)
Flags : 0x00000000

===============================================================================
Section 0 : Processor Generic
-------------------------------------------------------------------------------
Descriptor @ fffffa80078c60a8
Section @ fffffa80078c6180
Offset : 344
Length : 192
Flags : 0x00000001 Primary
Severity : Fatal

Proc. Type : x86/x64
Instr. Set : x64
Error Type : Cache error
Operation : Generic
Flags : 0x00
Level : 0
CPU Version : 0x00000000000306c3
Processor ID : 0x0000000000000002

===============================================================================
Section 1 : x86/x64 Processor Specific
-------------------------------------------------------------------------------
Descriptor @ fffffa80078c60f0
Section @ fffffa80078c6240
Offset : 536
Length : 128
Flags : 0x00000000
Severity : Fatal

Local APIC Id : 0x0000000000000002
CPU Id : c3 06 03 00 00 08 10 02 - bf fb da 7f ff fb eb bf
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00

Proc. Info 0 @ fffffa80078c6240

===============================================================================
Section 2 : x86/x64 MCA
-------------------------------------------------------------------------------
Descriptor @ fffffa80078c6138
Section @ fffffa80078c62c0
Offset : 664
Length : 264
Flags : 0x00000000
Severity : Fatal

Error : DCACHEL0_WR_ERR (Proc 2 Bank 1)
Status : 0xbf80000000000124
Address : 0x000000021b887200
Misc. : 0x0000000000000086
The Machine Check Exception indicates that the CPU has found a fault with the a piece of hardware and has bugchecked. We cannot really identify the cause without proper troubleshooting stress tests.

The 2nd parameter is the address that contains the WHEA (Windows Hardware Error Architecture) record.
Its a Level 0 cache write error.

There's only so much we can do until it comes down to a faulty processor, lets begin.

Stress test your CPU with Prime95

I recommend running Prime95 for around 2 hours



   Warning

As with most stress tests your component's temperature will rapidly increase.
It is advised that you download a temperature monitoring program like HWmonitor
Keep an eye on your temperatures and stop the tests if it starts to overheat

Stress test your graphics card with Furmark

I recommend running it for around 30 minutes



   Warning

Furmark will increase the temperature of your GPU rapidly so keep and eye on your temperatures

Memtest86 will test your RAM



   Information

Run Memtest86 for at least 8 passes so we get enough information to confirm that your RAM isn't failing

Run a Disk Check to scan for errors



   Note

Afterwards go into an Elevated Command Prompt (Run as administrator) and type in sfc /scannow
If it finds errors reboot and run the scan two more times

Run SeaTools to see if your HDD or SSD is failing

Try removing the CMOS battery then putting it back in to clear the BIOS of any improper settings.
Make sure you keep an eye on the temperatures.

Remove these programs...


Code:
Start Menu\Programs\ASUS\AI Suite 3 Public:Start Menu\Programs\ASUS\AI... Read more

http://www.sevenforums.com/bsod-help-support/334345-bsod-wake-up-error-0x00000124-driver-hal-dll-address-ntoskrnl-exe.html
Relevancy 73.1%

So been having recurring Bluescreens for a long time. They went away after I reduced the overclock as they were usually hal.dll errors but now I am getting ntoskrnl.exe errors. Any help?

A:BSOD when playing games, error 0x00000124, ntoskrnl.exe+14dca0

Edit: Could it be my GPU because the Core Clock was 50Hz higher than default?

My CPU is also overclocked but shouldn't be the problem I think

http://www.sevenforums.com/bsod-help-support/328583-bsod-when-playing-games-error-0x00000124-ntoskrnl-exe-14dca0.html
Relevancy 73.1%

My computer crashed every time I run experiment(NI equipment connects to the computer). My experiment needs to run two or three days, but every twelve hours it got crash(shut down automatically). The max work hour I got is 15 hours.

When I reboot the computer, I got the following information:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.4
Locale ID: 1033

Additional information about the problem:
BCCode: 124
BCP1: 0000000000000000
BCP2: FFFFFA800FAD58F8
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\020914-89029-01.dmp
C:\Users\BIT Lab\AppData\Local\Temp\WER-145174-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

My computer information:

Attachment 305907

and the SF files.
Attachment 305906

Anyone can give a clue? how to fix this?

A:BSOD bugcheck code 0x00000124 Caused By Driver ntoskrnl.exe

Welcome
BC 124 is not a driver or any other software. It is a hardware problem. You may want to start by checking your memory and hard drive for starters.
Stop 0x124 - what it means and what to try

http://www.sevenforums.com/bsod-help-support/321706-bsod-bugcheck-code-0x00000124-caused-driver-ntoskrnl-exe.html
Relevancy 72.67%

Hi This problem started in Flight Simulator but now its random I have run memtest twice for four hours caused 0x00000124, address by random, BSOD ntoskrnl.exe+4adb3c error each all is fine I have a Western Digital HD and ran their diagnostic tool for it from their site I have reset the RAM after cleaning it also I dust out the machine regularly I checked the voltage in the BIOS and the and all fall in range BUT I also have CPUID HWMonitor and that shows different voltage readings way below what they should be ex V - V WAY off I don't know BSOD random, error 0x00000124, caused by address ntoskrnl.exe+4adb3c if that is correct or the reading in the BIOS itself The last reboot was when I was in Flight Simulator I ran it BSOD random, error 0x00000124, caused by address ntoskrnl.exe+4adb3c in window mode with GPUID running so I could monitor the temperature When it rebooted the last temp I saw was C which is hardly overheating I believe All of the last or so reboots show quot caused by address ntoskrnl exe adb c quot I'm leaning towards the power supply but the different readings are confusing Thanks in advance Dutch

A:BSOD random, error 0x00000124, caused by address ntoskrnl.exe+4adb3c

Sorry, forgot to attach the dm log collector info. Here it is.

http://www.sevenforums.com/bsod-help-support/335087-bsod-random-error-0x00000124-caused-address-ntoskrnl-exe-4adb3c.html
Relevancy 72.67%

hello Did my first build Moved over the ssd and hdd's to new build all seemed well and good as I install all drivers from gigabyte disk pc seem to 0x00000124. Address playing ntoskrnl.exe+7f140 BSOD Error Company. Bad run BSOD playing Bad Company. Error 0x00000124. Address ntoskrnl.exe+7f140 fine until I play an online game I like battlefield bad company played it a TON on old rig and never ever had a BSOD no after about to minutes of play its happened every single time I try to play not sure what all more info you need but I will provide any info I can just ask I run win ultimate and ubuntu WUBI install I made a backup with acronis true image w plus pack via a boot cd with plus pack placed that backup onto a brand new ssd I bought a second ocz vertex thinking of doing a raid setup but decide against it do to loss of TRIM and it was odd as one os either ubuntu or win would boot and work with networking but not both the two ssd's are the same so i simply unplug the new one and plugged in the old one into the new build and every thing both os with networking work fine UNTILL I try to play bc I have added a second gtx in SLI using the way SLI connnector as the spacing of the x slots on the mobo I greatly appreciate your help with this issue not sure if I can replace the ntoskrnl exe or whatever else it may be I have read the guide to posting here and believe I have followed it if I did something wrong please bear with me and I will do it properly again I greatly appreciate your helping me correct my issues thanks and good day

A:BSOD playing Bad Company. Error 0x00000124. Address ntoskrnl.exe+7f140

Welcome to SF

WOW, 32 GB of ram is allot what are you going to do with all that?
Anyway, your dumps point toward defective/corrupted memory.

No need to test with memtest86+ right away, I would suggest you to manually
test each stick on different slots of your computer to identify the bad one.

For more information on your bug check go through the guide below:
→ Stop 0x124 - what it means and what to try

http://www.sevenforums.com/bsod-help-support/255737-bsod-playing-bad-company-error-0x00000124-address-ntoskrnl-exe-7f140.html
Relevancy 72.67%

I bought my computer last year Custom build Everything was working fine until January th this year I experienced my first BSOD on this machine I've tried rolling back graphics drivers which were the only ones BSOD Sparse Win7-64bit (hal.dll+12a3b, 0x00000124 ntoskrnl.exe+75bc0) I had installed recently and it didn't help because days later the same BSOD happened The next BSOD didn't happen for another month And recently this is my th one that I am attaching in the log compilation The other dmp's were Sparse BSOD 0x00000124 (hal.dll+12a3b, ntoskrnl.exe+75bc0) Win7-64bit erased by me Sparse BSOD 0x00000124 (hal.dll+12a3b, ntoskrnl.exe+75bc0) Win7-64bit by accident but they all said the same thing when I opened them in BlueScreenView I will try reseating hardware and more stress tests when I have time but I'm really lost here as its such a sparse occurrence that it makes it really hard for me to test in a reasonable amount of time I'm hoping someone here can see what my inexperienced eyes are missing Here's what I do know - I didn't install any drivers for a while month or so other than the nvidia driver which I rolled back - I am not overclocking and just running stock and default BIOS Though since my rd BSOD I have turned on XMP for my RAM didn't make anything worse I guess - The BSOD happens very randomly Twice while I was playing fairly low resource demanding games Once while I was just on desktop dragging organizing files And most recently Sparse BSOD 0x00000124 (hal.dll+12a3b, ntoskrnl.exe+75bc0) Win7-64bit while browsing Twitch tv on Chrome There seems to be nothing in common which is really frustrating - It doesn't seem to be related to how long my computer has been running The most recent happened minutes after turning my computer on - I have a minor suspicion it could be my sound because it's always given me issues distorting not being detected randomly at startup But it is onboard and I have no idea how to begin testing it I will post updates as I perform further tests will be running memtest thru the night last time only ran for hours Please let me know any good suggestions Thanks a lot

A:Sparse BSOD 0x00000124 (hal.dll+12a3b, ntoskrnl.exe+75bc0) Win7-64bit

I apologize ahead of time for losing the other 3 memory dumps, though they all appeared the same I'm sure there was useful information in there. I deleted them by accident via diskcleanup utility. I will post memory dmps as they happen in this thread, but for now if anyone sees a potential problem or has any advice to test please let me know.

http://www.sevenforums.com/bsod-help-support/328551-sparse-bsod-0x00000124-hal-dll-12a3b-ntoskrnl-exe-75bc0-win7-64bit.html
Relevancy 72.67%

So it went a way for two weeks when error 0x00000124, (5logs) ntoskrnl.exe+153fa0 playing BSOD games, my blue screen errors and now reappearing again I've ran memtest prime and furmark and all passed Here is an analysis of one of the logs from OSR Online Analysis Code TRIAGER Could not open triage file e dump analysis program triage modclass ini error BUGCHECK STR x GenuineIntel CUSTOMER CRASH BSOD when playing games, error 0x00000124, ntoskrnl.exe+153fa0 (5logs) COUNT DEFAULT BUCKET ID WIN DRIVER FAULT PROCESS NAME chrome exe CURRENT BSOD when playing games, error 0x00000124, ntoskrnl.exe+153fa0 (5logs) IRQL f STACK TEXT ffffd e cf nt KeBugCheckEx STACK COMMAND kb FOLLOWUP NAME MachineOwner MODULE NAME GenuineIntel IMAGE NAME GenuineIntel DEBUG FLR IMAGE TIMESTAMP FAILURE BUCKET ID X x GenuineIntel PROCESSOR CACHE BUCKET ID X x GenuineIntel PROCESSOR CACHE Followup MachineOwner In all of the logs it refers to Genuine Intel so I'm guessing it's the CPU problem Any more help anyone can give It's overclocked but has been for weeks working fine and all of a sudden these issues BSOD when playing games, error 0x00000124, ntoskrnl.exe+153fa0 (5logs) started to arise Build Intel i - k Kingston Hyper X GB x GB Modules AMD R - x Asus Z -a Corsair TX v Samsung Pro Series GB SSD TB Western Digital Blue HDD OS is on SSD Any help

A:BSOD when playing games, error 0x00000124, ntoskrnl.exe+153fa0 (5logs)

Can no one help me?

http://www.sevenforums.com/bsod-help-support/330615-bsod-when-playing-games-error-0x00000124-ntoskrnl-exe-153fa0-5logs.html
Relevancy 72.67%

Hi This problem started in Flight Simulator but now its random I have run memtest twice for four hours each all is fine I have a Western Digital HD and ran their diagnostic tool for it from their site I have reset the RAM after cleaning it also I dust out the machine regularly I checked the voltage in the BIOS and the and all fall in range BUT I also have CPUID HWMonitor and that shows different voltage readings way below what ntoskrnl.exe+4adb3c by address BSOD error 0x00000124, random, caused they should be ex V - V WAY off I don't know if that is correct or the reading in the BIOS itself The last reboot was when I was in Flight Simulator I ran it in window mode with BSOD random, error 0x00000124, caused by address ntoskrnl.exe+4adb3c GPUID running so I could monitor the temperature When it rebooted the last temp I saw was C which is hardly overheating BSOD random, error 0x00000124, caused by address ntoskrnl.exe+4adb3c I believe All of the last or so reboots show caused by BSOD random, error 0x00000124, caused by address ntoskrnl.exe+4adb3c address ntoskrnl exe adb c I'm leaning towards the power supply but the different readings are confusing so I'm asking for advice Thanks in advance Dutch

A:BSOD random, error 0x00000124, caused by address ntoskrnl.exe+4adb3c

I have a DM Log Collector dump file, which I tried to upload with this, but it was too big.  I could post anything from it if needed.

http://www.bleepingcomputer.com/forums/t/538177/bsod-random-error-0x00000124-caused-by-address-ntoskrnlexe4adb3c/
Relevancy 72.67%

Hello When I first started to encounter BSOD issues I was originally getting event id Machine check exception Translation Lookaside Buffer errors which I assumed was an issue with my CPU I contacted Intel and they stated to me that Windows was not correctly dumping the Bug ntoskrnl.exe ID driver caused BSOD 1001 Check 0x00000124 by Event right information which is why it states the event id BSOD Event ID 1001 Bug Check 0x00000124 caused by ntoskrnl.exe driver error They stated that it may be an issue with the motherboard or memory I have ran Memtest for passes and errors were discovered I have also done this with - memory sticks installed on the motherboard I was able to run Prime overnight multiple times with memory sticks installed and the only time it BSOD'd was with module and this only happened once The next day I ran Prime on the one module and it didn't BSOD The BSOD's are intermitten and happen more often when I am playing games I have encountered the same BSOD when checking email downloading files from the internet and even when the CPU is idling at with absolutely nothing running at all The Blue ScreenView indicates the exact same parameters and that they are being reported from the ntoskrnl exe driver In the past the most common driver that reported the BSOD's was the hal dll driver I have swapped my graphics card network card memory modules and I am still getting BSOD's These parts I have tested on another computer and they work correctly I have reinstalled the OS times over the last year I am currently in contact with ASUS to see if the issue resides on the motherboard which is the only thing I haven't been able to swap including the processor I have ran Memtest and Prime Sisandra Lite Linx IPDTx as well as many other diagnostics benchmarking tools with passing results There are no specific times that this occurs and it can happen at any moment Any help in understanding what my issue is would be appreciated When the system works fine I am very happy and it performs flawlessly I hope that maybe I am having a driver or hardware issue and it is a simple fix I have posted additional information you requested below including the attached zip file named 'skopischke BSOD zip' Is Windows - x -bit or x x - the original installed OS on the system Windows Professional x - an OEM or full retail version OEM came pre-installed on system - What is the age of system hardware Purchased in February of - What is the age of OS installation have you re-installed the OS Reinstalled OS times last reinstall was December

A:BSOD Event ID 1001 Bug Check 0x00000124 caused by ntoskrnl.exe driver

0x124 is a general hardware error .





Quote:
A "stop 0x124" is fundamentally different to many other types of bluescreens because it stems from a hardware complaint.

Stop 0x124 minidumps contain very little practical information, and it is therefore necessary to approach the problem as a case of hardware in an unknown state of distress


Some generic advice.

If you are overclocking STOP.
Return to the default settings at least for now.

If you are running a RAID update its driver.
You can read more on this error and what to try here...

Stop 0x124 - what it means and what to try

http://www.sevenforums.com/bsod-help-support/208569-bsod-event-id-1001-bug-check-0x00000124-caused-ntoskrnl-exe-driver.html
Relevancy 72.67%

This is my first time posting here, so my apologies if I mess something up or get it wrong. If I do, please let me know so I can fix it!
This is something that's just started happening recently. It happened once on the 14th of February, then once last night (on the 22nd), and today on the 23rd. The crash on the 14th didn't have the same screen as the last two crashes (photo attached of crash screen). I don't recall what the crash on the 14th happened during (most likely Skyrim), but the last two crashes happened during playing minecraft, typically while moving around and jumping. I have downloaded a couple of mods for the game, but was not running them when the crashes happened (the mods have a separate launcher, plus the crash occurred once before I ever played Minecraft).

I appreciate any help anyone can give me!

A:BSOD playing Minecraft, driver ntoskrnl.exe, bug check code 0x00000124

Your .dmp file shows a stop error of 0x124 which is a general hardware error .





Quote:
A "stop 0x124" is fundamentally different to many other types of bluescreens because it stems from a hardware complaint.

Stop 0x124 minidumps contain very little practical information, and it is therefore necessary to approach the problem as a case of hardware in an unknown state of distress


Some generic advice.

If you are overclocking STOP.
Return to the default settings at least for now.

If you are running a RAID update its driver.
You can read more on this error and what to try here... Stop 0x124 - what it means and what to try

http://www.sevenforums.com/bsod-help-support/215981-bsod-playing-minecraft-driver-ntoskrnl-exe-bug-check-code-0x00000124.html
Relevancy 71.81%

Hey guys, just awhile ago I got the random BSOD PFN_LIST_CORRUPT caused by a ntoskrnl.exe+7cc40
I think it's a RAM issue, but I'm not sure

I'm pretty computer illiterate, so sorry if I'm slow or anything

Edit: Didn't see sticky, really sorry. Doing as listed right now.

A:PFN_LIST_CORRUPT caused by ntoskrnl.exe+7cc40

Can't edit post twice within 15 mins so I'll just post this
Updated attachments and Info

Windows 7, x64
Original OS
OEM
Just got the laptop about a year ago
I just formatted the system after a virus I couldn't be bothered to deal with. But I guess a year as well.

Intel(R) Core(TM) i3 CPU M 380 @ 2.53GHz, 2533 Mhz, 2 Core(s), 4 Logical Processor(s)
Don't know what kind of motherboard it has or what kind of specific battery it's using.

ASUSTeK
Model:U52F
MB Ver:U53F
"U52f-BBG6" is also some other info my laptop says.

http://www.techsupportforum.com/forums/f299/pfn_list_corrupt-caused-by-ntoskrnl-exe-7cc40-631621.html
Relevancy 71.81%

HI

I have been experiencing DRIVER_POWER_STATE_FAILURE crashes lately caused by ntoskrnl.exe.

I originally thought I would reinstall W7 but that has not fixed the issue

I am using OEM W7 Professional x64

The CPU is a i7 2600
The PC is only no more than 2 yrs old.
I d have an old Canon scanner LiDE 100 that I expect is causing the problem. The PC was working fine for over a year until NOv 2011 and then started crashing. I reinstallled W7 all seamed to be fine util I loaded the software for the scanner. I have loaded the latest software from the canon site.

I hope some one can some one help me?
If it is the driver for the scanner, why now?
Cheers
Craig

A:Help with DRIVER_POWER_STATE_FAILURE, caused by ntoskrnl.exe+7cc40

I'm running a Dec, a Jan, and a Feb 2012 memory dump.

Atheros AR3011 Bluetooth (no firmware) device isn't installed. Please download and install the drivers from the PC Manufacturer's website.

The BSOD's blame the disks connected to your Marvell controller. This means that it's either the disk or the controller. To test the controller, switch the disks to another controller (most Asus boards have 2) and see if that helps. Don't forget to update the controller drivers. If any of the drives fail, backup your data IMMEDIATELY! There's no telling when the drive will fail.

To test the disk, start with these free diagnostics: HD Diagnostic
Test ALL hard drives!

Further info on BSOD error messages available at: http://www.carrona.org/bsodindx.html

The following info is just FYI, I've already addressed the issues that I saw in the above paragraphs:
3RD PARTY DRIVERS PRESENT IN THE DUMP FILES
- Create a System Restore Point prior to doing any of this. DO NOT mess with the drivers themselves - leave the Windows\System32\drivers directory alone unless we specifically direct you to it!
- Please either update the older drivers from the device manufacturer's website - or uninstall them from your system. Reference links are included below.
- DO NOT use Windows Update or the Update Drivers function of Device Manager.
- Please feel free to post back about any drivers that you are having difficulty locating.
- Windows Update exceptions may be noted below for Windows drivers.

Code:

nvhda64v.sys Thu Nov 11 18:10:36 2010 (4CDC77EC)
iaStor.sys Sat Nov 06 03:44:52 2010 (4CD50774)
nusb3hub.sys Thu Sep 30 00:00:03 2010 (4CA40B43)
mv91xx.sys Fri Aug 27 05:49:22 2010 (4C778A22)
mvxxmm.sys Fri Aug 27 05:49:03 2010 (4C778A0F)
amdxata.sys Fri Mar 19 12:18:18 2010 (4BA3A3CA)
aswTdi.SYS Mon Nov 28 12:52:18 2011 (4ED3CA52)
aswSnx.SYS Mon Nov 28 12:54:05 2011 (4ED3CABD)
dump_mvxxmm.sys Fri Aug 27 05:49:03 2010 (4C778A0F)
aswRdr.SYS Mon Nov 28 12:52:20 2011 (4ED3CA54)
ElbyCDIO.sys Thu Dec 16 17:58:13 2010 (4D0A9985)
aswSP.SYS Mon Nov 28 12:53:57 2011 (4ED3CAB5)
GEARAspiWDM.sys Mon May 18 08:17:04 2009 (4A1151C0)
HECIx64.sys Tue Oct 19 19:33:43 2010 (4CBE2AD7)
aswMonFlt.sys Mon Nov 28 12:52:10 2011 (4ED3CA4A)
aswFsBlk.SYS Mon Nov 28 12:51:52 2011 (4ED3CA38)
RTKVHD64.sys Tue Nov 02 07:25:59 2010 (4CCFF547)
dump_mv91xx.sys Fri Aug 27 05:49:22 2010 (4C778A22)
Rt64win7.sys Mon Oct 25 05:33:07 2010 (4CC54ED3)
nvlddmkm.sys Sat May 21 00:07:04 2011 (4DD73A68)
nvBridge.kmd Fri May 20 23:58:23 2011 (4DD7385F)
nusb3xhc.sys Thu Sep 30 00:00:03 2010 (4CA40B43)
AnyDVD.sys Sun Dec 04 16:23:55 2011 (4EDBE4EB)
nvlddmkm.sys Wed Feb 23 22:01:34 2011 (4D65CA0E)
nvBridge.kmd Wed Feb 23 21:57:02 2011 (4D65C8FE)

http://www.carrona.org/drivers/driver.php?id=nvhda64v.sys
http://www.carrona.org/drivers/driver.php?id=iaStor.sys
http://www.carrona.org/drivers/driver.php?id=nusb3hub.sys
http://www.carrona.org/drivers/driver.php?id=mv91xx.sys
http://www.carrona.org/drivers/driver.php?id=mvxxmm.sys
http://www.carrona.org/drivers/driver.php?id=amdxata.sys
http://www.carrona.org/drivers/driver.php?id=aswTdi.SYS
http://www.carrona.org/drivers/driver.php?id=aswSnx.SYS
http://www.carrona.org/drivers/driver.php?id=dump_mvxxmm.sys
http://www.carrona.org/drivers/driver.php?id=aswRdr.SYS
http://www.carrona.org/drivers/driver.php?id=ElbyCDIO.sys
http://www.carrona.org/drivers/driver.php?id=aswSP.SYS
http://www.carrona.org/drivers/driver.php?id=GEARAspiWDM.sys
http://www.carrona.org/drivers/driver.php?id=HECIx64.sys
http://www.carrona.org/drivers/driver.php?id=aswMonFlt.sys
http://www.carrona.org/drivers/driver.php?id=aswFsBlk.SYS
http://www.carrona.org/drivers/driver.php?id=RTKVHD64.sys
http://www.carrona.org/drivers/driver.php?id=dump_mv91xx.sys
http://www.carrona.org/drivers/driver.php?id=Rt64win7.sys
http://www.carrona.org/drivers/driver.php?id=nvlddmkm... Read more

http://www.sevenforums.com/bsod-help-support/215012-help-driver_power_state_failure-caused-ntoskrnl-exe-7cc40.html
Relevancy 70.95%

Very frequents BSODs mostly drivers various 50, BSODs BCCode always ntoskrnl.exe+7cc40 but with BCCode but also BCCode in about a to ratio various quot caused by quot addresses but quot crash address quot always ntoskrnl exe cc as viewed with BlueScreenView FIRST thing I want to know given that of maybe BSODs all have the same quot crash address quot is my presumption that this provides no information relevant and revelatory in my situation correct Perhaps all BSODs with BCCode and b terminate with the same quot crash address quot SECOND thing I want to know is which column in the BlueScreenView may contain information that I can begin to do something about I searched on some keywords in this forum and hit upon several similar posts but enough different that BSODs with BCCode 50, various drivers but always ntoskrnl.exe+7cc40 I believe I could benefit from replies unique to those two questions above BTW because I read somewhere that RAM could be involved in cases of BCCode I have run the extended RAM pre-boot assessment a couple of times and PC Check of memory with lots of walking this-and-that and ran the whole suite of checks with all quot passed quot

A:BSODs with BCCode 50, various drivers but always ntoskrnl.exe+7cc40

Please upload a report

http://www.sevenforums.com/crashes-d...tructions.html

http://www.sevenforums.com/bsod-help-support/217171-bsods-bccode-50-various-drivers-but-always-ntoskrnl-exe-7cc40.html
Relevancy 70.52%

Earlier tonight while watching a TV episode using KMPlayer I suddenly got a BSOD the computer restarts and windows works fine Except chrome now won't start stating it has encountered a problem and needs to close but works when I use ntoskrnl.exe Sudden onset BSOD's of the old chrome Sudden onset of BSOD's ntoskrnl.exe exe which I'm using now I thought it was a one time thing and go back to the episode it happens again about half an hour later Then about another half hour after that when I'm researching Sudden onset of BSOD's ntoskrnl.exe the issue Then again later when I was trying to drag the update window for malwarebytes to a side screen And just now when I clicked on a link to youtube in an email I've read other threads relating to ntoskrnl exe BSOD's and it seems that without knowing how to interpret the dump files I won't be getting anywhere Possibly relevant changes I've made today are I plugged a mic pre-amp into the line-in port on my soundcard which is left in there with the pre-amp turned off that knocked one of Sudden onset of BSOD's ntoskrnl.exe my DVI cables and I had to reconfigure nvidia surround I updated KMPlayer in hopes of reducing a slight stuttering issue I was having mins later this all happens I've already run ad-aware antivirus spybot search amp destory and malwarebytes anti-malware I also attempted to run SFC scannow but it failed at Any help will be appreciated I have attached the zip As an aside the computer is just over a year old has never had a single issue I don't have an antivirus program because I used to be a computer technician and am very careful plus they mess with my games it runs and I generally restart it every week or so

A:Sudden onset of BSOD's ntoskrnl.exe

Welcome to the Forum.

Update these drivers:SiLib.sys Wed Feb 7 05:13:54 2007 (45C90BB2)
USBXpress Development Kit
Driver Reference Table - SiLib.sys

AseUSBCC.sys Wed Feb 7 05:15:34 2007 (45C90C16)
Aladdin USB Key HASP Driver (also associated w/Antec Liquid Cooling software)
Driver Reference Table - AseUSBCC.sys

wacommousefilter.sys Sat Feb 17 00:12:17 2007 (45D5F401)
Wacom(tablet) Mouse Filter
Driver Reference Table - wacommousefilter.sys

lirsgt.sys Tue Jun 17 21:17:08 2008 (4857D574)
part of a Copy Protection platform developed by Tages SA
Driver Reference Table - lirsgt.sys

GEARAspiWDM.sys Mon May 18 18:17:04 2009 (4A1151C0)
CD-ROM Class Filter Driver by Gear Software.[br]Also comes with iTunes
Driver Reference Table - GEARAspiWDM.sys
------------------------
To perform a clean install of a driver, follow this tutorial: How to Clean Left Over Driver Files with Driver Sweeper
------------------------


   Information
and install Revo Uninstaller.Opt for "Advanced Mode" and uninstall the software (also delete the leftover registry entries).


------------------------
Run the System File Checker that scans the of all protected Windows 7 system files and replaces incorrect corrupted, changed/modified, or damaged versions with the correct versions if possible: Click on the
Type CMD on Search
Left click and Run as Administrator
Type SFC /scannow - read here
Run Disk Check on your Hard Drive for file system errors and bad sectors on it - read here
------------------------
Make scans with these tools - TDSSKiller Rootkit Removal Utility Free Download | Kaspersky Lab US
Online Virus Scanner Eset
Monitor hardware temperature with system monitoring software like Speccy or HWMonitor. Upload a screen shot of the Summary tab as well:Piriform - Speccy
CPUID - HWMonitor
------------------------
If BSOD's continue, Enable Driver Verifier to see if it catches any misbehaving driver: Driver Verifier - Enable and Disable
Using Driver Verifier to identify issues with Drivers
BSOD SUMMARY

Code:
Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Debug session time: Mon Sep 30 22:01:21.317 2013 (UTC + 6:00)
System Uptime: 0 days 0:47:26.176
BugCheck 109, {a3a039d8b3720594, b3b7465f05f047de, fffff80000b96bb0, 6}
Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )
BUGCHECK_STR: 0x109
PROCESS_NAME: System
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Debug session time: Mon Sep 30 20:58:46.608 2013 (UTC + 6:00)
System Uptime: 0 days 0:45:49.451
BugCheck 109, {a3a039d8b3e52894, b3b7465f06636ade, fffff80000b96bb0, 6}
Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )
BUGCHECK_STR: 0x109
PROCESS_NAME: System
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Debug session time: Mon Sep 30 20:12:10.236 2013 (UTC + 6:00)
System Uptime: 0 days 0:15:58.080
BugCheck 109, {a3a039d8b433a768, b3b7465f06b1e9c2, fffff80000b96bb0, 6}
Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )
BUGCHECK_STR: 0x109
PROCESS_NAME: System
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Debug session time: Mon Sep 30 19:55:17.678 2013 (UTC + 6:00)
System Uptime: 0 days 0:45:50.411
BugCheck 109, {a3a039d8b59af5bb, b3b7465f08193805, fffff80000b96bb0, 6}
Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )
BUGCHECK_STR: 0x109
PROCESS_NAME: System
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Debug session time: Mon Sep 30 19:08:34.267 2013 (UTC + 6:00)
System Uptime: 0 days 0:46:00.110
BugCheck 109, {a3a039d8b41f651d, b3b7465f069da767, ff... Read more

http://www.sevenforums.com/bsod-help-support/306695-sudden-onset-bsods-ntoskrnl-exe.html
Relevancy 70.52%

A few days ago I started having problems with my ASUS G J laptop A BSOD usually occurs after about - minutes of running Windows x I have had BSODs since it started I have no problems when it is running in safemode I have attached the pertinent info required plus a SeaTools analysis of the HDD and a photo of a completed memtest I also performed a virus scan with MSE and a full malware scan with Malwarebytes I also performed a CHKDSK r which did not fix the problem I did a cursory examination of the minidumps and noticed that all of the crash addresses come from the ntoskrnl exe file to related ntoskrnl.exe+7cc40 BSODs possibly cc file Of course I am by no means a computer expert and have no idea BSODs possibly related to ntoskrnl.exe+7cc40 file what that means so I will leave you guys the BSODs possibly related to ntoskrnl.exe+7cc40 file experts to determine the problem I have had the laptop for about a year and a half with no BSOD problems however I did reinstall Windows over the summer for some software issues This is the first kind of problem that I have had with the laptop since the reinstall Any help would be appreciated Thanks in advance OS - Vista Windows - Microsoft Windows Home Premium x -bit or x - bit What was original installed OS on system - The original OS is Microsoft Windows Home Premium x Is the OS an OEM version came pre-installed on system or full retail version YOU purchased it from retailer - This is an OEM version Age of system hardware - The system is about a year and a half old Age of OS installation - have you re-installed the OS - The OS was reinstalled during the summer around the beginning of June CPU - Intel R Core TM i CPU M GHz Intel Family Model Stepping Video Card - NVIDIA GeForce GTS M Mb MotherBoard - PEGATRON CORPORATION G JX BSN Power Supply - brand amp wattage - The input is V A W System Manufacturer - ASUS Exact model number if laptop check label on bottom - G JX Sample problem signature Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode BCP FB BCP FFFFF CB C BCP FFFFF CB BCP FFFFF B C OS Version Service Pack Product

A:BSODs possibly related to ntoskrnl.exe+7cc40 file

NOTE: I have severe eye problems. If I do not respond to your postings, please PM another staff member for assistance.

I see that SeaTools passed the Short test, but can't see if it passed the Long test. Do you know if it passed the Long test?

25 memory dumps over 3 days (13 to 15 Oct 2011)
7 different BSOD error codes
at least 5 different causes blamed
This is most likely a hardware problem - although it's possible that it's due to lower level drivers also.

Systeminfo.txt report not completed, please ensure that you have all Windows Updates:

Quote:




Installing Windows 7 Service Pack 1
1. Visit the PC manufacturer's website and update ALL drivers. DO NOT use Windows Update or the "Update drivers" function of Device Manager.
2. Check Device Manager for any unknown/disabled devices - if there are unknown/disabled devices, fix them with the latest drivers from the device manufacturer's website (not the PC Manufacturer)
3. Visit Windows Update and get all updates
4. Visit Windows Update and get Service Pack 1 (usually under Important Updates). Read these notes for installing SP1: Steps to follow before you install Windows 7 Service Pack 1 from the Microsoft Download Center
5. Visit Windows Update and get any other available updates




MSINFO32 shows a problem with SPLDR. This (at work) is usually a symptom of a virus infection. Please perform one of these independent (outside of Windows) virus scans to be sure:
Quote:




Please run one of these free, bootable antivirus disks at this link: Free Online AntiMalware Resources - Bootable Disks




Is it possible that this is left over damage from a previously removed infection?

Please uninstall the Asus Data Security Manager software as it shows up in quite a few of the BSOD's. Visit the Asus support website and download/install the latest 64 bit Win7 version of this software.

Also, the ATK0101 HOTKEY utility software dates from 2007. Please uninstall that verrsion and install the latest version available from the manufacturer's website ( ASUSTeK Computer Inc. -Support- Drivers and Download G60J ). It's under the ATK section in the downloads.

If these don't fix the problems, please post back and we'll start looking at hardware causes.

BSOD BUGCHECK SUMMARY

Code:

Loading Dump File [C:\Users\FUBAR\_jcgriff2_\dbug\__Kernel__\101511-19780-01.dmp]
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Sat Oct 15 22:03:59.880 2011 (UTC - 4:00)
System Uptime: 0 days 0:16:48.988
Probably caused by : Ntfs.sys ( Ntfs! ?? ::FNODOBFM::`string'+2b49 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: rundll32.exe
BUGCHECK_STR: 0x24
FAILURE_BUCKET_ID: X64_0x24_Ntfs!_??_::FNODOBFM::_string_+2b49
Bugcheck code 00000024
Arguments 00000000`001904fb fffff880`0b23ac48 fffff880`0b23a4a0 fffff800`032c5b65
BiosVersion = 203
BiosReleaseDate = 12/10/2009
CPUID: "Intel(R) Core(TM) i5 CPU M 430 @ 2.27GHz"
MaxSpeed: 2270
CurrentSpeed: 2266
??????????????????????????????????????????????????????????????????????????????????????``
Loading Dump File [C:\Users\FUBAR\_jcgriff2_\dbug\__Kernel__\101511-25677-01.dmp]
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Sat Oct 15 21:46:29.089 2011 (UTC - 4:00)
System Uptime: 0 days 0:16:57.572
*** WARNING: Unable to verify timestamp for AsDsm.sys
*** ERROR: Module load completed but symbols could not be loaded for AsDsm.sys
Probably caused by : AsDsm.sys ( AsDsm+19a5 )
BUGCHECK_STR: 0x1E_c0000005
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: explorer.exe
FAILURE_BUCKET_ID: X64_0x1E_c0000005_AsDsm+19a5
Bugcheck code 0000001E
Arguments ffffffff`c0000005 fffff800`032cdb65 00000000`00000000 ffffffff`ffffffff
BiosVersion = 203
BiosReleaseDate = 12/10/2009
CPUID: "Intel(R) Core(TM) i5 CPU M 430 @ 2.27GHz"
MaxSpeed: 2270
CurrentSpeed: 2266
??????????????????????... Read more

http://www.techsupportforum.com/forums/f299/bsods-possibly-related-to-ntoskrnl-exe-7cc40-file-606596.html
Relevancy 69.66%

Hi This to and ntoskrnl.exe BSOD's HIDCLASS.SYS relating Sudden computer is Sudden BSOD's relating to ntoskrnl.exe and HIDCLASS.SYS a custom build approx years old and no issues up till now aside from perhaps stray BSOD over a year ago This morning I BSOD'ed out of nowhere At the time I was using my computer for work Sudden BSOD's relating to ntoskrnl.exe and HIDCLASS.SYS Thunderbird Excel Chrome Firefox Skype Dreamweaver among other apps were open After the restart I BSOD'ed again approx minutes after Windows reloaded I was in the process of opening up the abovementioned applications to resume work Thunderbird was the last application I opened prior to the second BSOD Both BSOD's were attributed to ntoskrnl exe as per BlueScreenView Things I've done since - restarted checked all drivers for updates Checked and applied any available Windows updates - booted into safe mode ran a malwarebytes scan No malware Ran Kaspersky scan nothing - activated driver verifier and checked all options except Microsoft drivers - rebooted into normal mode After about hour of the computer being VERY sluggish due to verifier I suppose I BSOD'ed the third time - rebooted ran BlueScreenView which attributed the latest crash to HIDCLASS SYS I used to be good at these things got spoiled by having a mostly error-free computer the past few years Thanks in advance for taking time to help me

A:Sudden BSOD's relating to ntoskrnl.exe and HIDCLASS.SYS

hidclass is a native windows driver, I would start with an sfc scan to verify windows components
SFC /SCANNOW Command - System File Checker
check temperatures for any signs of overheating

Your original bugcheck codes are 0xA which lists as STOP 0x0000000A: IRQL_NOT_LESS_OR_EQUAL
unfortunately this is quite a vague bugcheck code, lightening up your startup and running a clean boot may help to narrow down likely causes
Troubleshoot Application Conflicts by Performing a Clean Startup

http://www.sevenforums.com/bsod-help-support/362341-sudden-bsods-relating-ntoskrnl-exe-hidclass-sys.html
Relevancy 63.21%

Hi

A few days ago I did a new hardware build and installed W7 64 ultimate. I included a Corsair SSD as my boot drive for the speed advantage.

I have done some investigation and tried to track down the cause of the BSOD but to no avail. Currently they are happening once\ twice or more a day but very erratic so have no confidence in the system at the moment.

I have uploaded dumps of recent crashes in the hope someone here can help.

Anything would be appreciated. Thanks.

A:random BSODs with new build - error related to "ntoskrnl.exe+7cc40"?

Run a RAM test RAM - Test with Memtest86+
Stop any Overclocking if any.

Remove any Avast software, use MSE instead.
Uninstall Asus PC Probe, Smart Doctor, Asus update or any other Asus utilities.

Are you using any old(pre-Vista) software that might not be 64-bit compatible?


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

CRITICAL_STRUCTURE_CORRUPTION (109)
This bugcheck is generated when the kernel detects that critical kernel code or
data have been corrupted. There are generally three causes for a corruption:
1) A driver has inadvertently or deliberately modified critical kernel code
or data. See http://www.microsoft.com/whdc/driver/kernel/64bitPatching.mspx
2) A developer attempted to set a normal kernel breakpoint using a kernel
debugger that was not attached when the system was booted. Normal breakpoints,
"bp", can only be set if the debugger is attached at boot time. Hardware
breakpoints, "ba", can be set at any time.
3) A hardware corruption occurred, e.g. failing RAM holding kernel code or data.
Arguments:
Arg1: a3a039d89c614680, Reserved
Arg2: b3b7465eeede15d6, Reserved
Arg3: fffff80001dfe036, Failure type dependent information
Arg4: 0000000000000001, Type of corrupted region, can be
0 : A generic data region
1 : Modification of a function or .pdata
2 : A processor IDT
3 : A processor GDT
4 : Type 1 process list corruption
5 : Type 2 process list corruption
6 : Debug routine modification
7 : Critical MSR modification

Debugging Details:
------------------
BUGCHECK_STR: 0x109

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: CODE_CORRUPTION

PROCESS_NAME: System

CURRENT_IRQL: 0

LAST_CONTROL_TRANSFER: from 0000000000000000 to fffff80001cd0c40

STACK_TEXT:
fffff880`021c45d8 00000000`00000000 : 00000000`00000109 a3a039d8`9c614680 b3b7465e`eede15d6 fffff800`01dfe036 : nt!KeBugCheckEx
STACK_COMMAND: kb

CHKIMG_EXTENSION: !chkimg -lo 50 -d !nt
fffff80001dfe44d - nt!ExDeferredFreePool+9ed
[ 40:00 ]
1 error : !nt (fffff80001dfe44d)

MODULE_NAME: memory_corruption

IMAGE_NAME: memory_corruption

FOLLOWUP_NAME: memory_corruption

DEBUG_FLR_IMAGE_TIMESTAMP: 0

MEMORY_CORRUPTOR: ONE_BIT

FAILURE_BUCKET_ID: X64_MEMORY_CORRUPTION_ONE_BIT

BUCKET_ID: X64_MEMORY_CORRUPTION_ONE_BIT

Followup: memory_corruption
---------

http://www.sevenforums.com/bsod-help-support/202579-random-bsods-new-build-error-related-ntoskrnl-exe-7cc40.html
Relevancy 61.06%

I built a new machine about weeks ago MAchine booted up fine and ran with no issues All drivers installed fine no errors A few days later i started getting minidump errors when coming to my machine after it was sitting idle for a time So i dont turn my machine off at night I have been having Random crashes ALWAYS when the machine is idle If i am physically using the machine ie browsing gaming etc no crash if i walk aways for a time and leave it running i till come back to a your machine has recovered from a serious error message saying the error occured x hal dll a b and ntoskrnl exe bc I have removed all components blown out all the sockets and replaced them making sure each one is properly seated in the sockets I am using an after market Cooler on the CPU real temp shows the temps are normal though i dont know if this ever changes Only going by the real temp display on my notification bar All fans are running ntoskrnl exe bc and set to full speed Machine has crashed times since the th july all for same error Hope someone can help cause i am stumped minidumps are here http ppl ug YUexjn SeU Speccy http speccy piriform com results gR YnYI cglguXyCSkTCY Minidump attached nbsp minitool dump txt nbsp nbsp KB nbsp nbsp downloads

A:0x00000124 Error on Hal.dll and ntoskrnl.exe+75bc0

Googling a bit seems to point to hardware issues, the fact that it only happens when you leave the computer on alone but not when you are using it would point me to think there's something going on with powersaving options, not sure tough, are you overclocking your processor?
 
Maybe it has to do with so many harddrives plugged in at one and hard drive power saving features, but i'm no expert tough.

http://www.bleepingcomputer.com/forums/t/543018/0x00000124-error-on-haldll-and-ntoskrnlexe75bc0/
Relevancy 61.06%

Hey,

I've recently switched from Windows 7 to Windows 8.1 - and I had a similar problem in Windows 7. I've attached the .zip from the SF debug tool (I also put in the report from BlueScreenView).

While using Photoshop, my PC suddenly rebooted - no "Your PC ran into a problem" screen - leaving behind a dump file. BlueScreenView isn't helping me - it's putting the finger of blame on ntoskrnl.exe, which doesn't seem like anything weird - it's a Windows file after all.

I would really appreciate it if someone could take a look and tell me what I can do to fix it.

(I also had a 0x00000101 CLOCK_WATCHDOG_TIMEOUT error when using Windows 7, if that helps.)

A:Error 0x00000124 -using Photoshop (ntoskrnl.exe)

Check your temperatures, dust in the case, run memory test for no less than eight passes: RAM - Test with Memtest86+ - Windows 7 Help Forums

http://www.eightforums.com/bsod-crashes-debugging/60946-error-0x00000124-using-photoshop-ntoskrnl-exe.html
Relevancy 59.77%

This started happening in late november early december when i replaced my old GPU - gtx ti - to a new one 0x00000124 no response and freeze ntoskrnl.exe+4b297c Complete gtx current pc CPU Intel Core i x GHz MBO Gigabyte GA-B M-D H GPU Palit GeForce GTX Super Jetstream GB RAM Kingston HYPERX Black x GB MHz PSU Be Quiet PurePower L - Complete freeze and no response 0x00000124 ntoskrnl.exe+4b297c W DISPLAY iiyama E WS amp LG L P this is a non-oc build the card is factory overclocked but i didnt do anything to it too everything else was the same hardware wise that build is year old reinstalled windows and installed all the programs i would normally use on the next day my pc froze up completely with a looped noise during a league of legends match unresponsive didnt restart nothing i had to manually power it down and still it took a while to respond to a reset when i rebooted the pc the choose operating system choice came up i started windows normally and i was surprised that there was no message like quot windows recovered form a serious error etc quot there was no such thing i thought that something got screwed up with drivers reinstalled them it didnt happen again untill next week when i was playing starcraft now that started to look suspicious i was worried that the new GPU is causing problems before i buy any components i use a few online power calculators to see if my PSU will handle it it was fine way above the power i needed for that system so a week later it starts to happen more often it always occurs doing playing a game most of the time its when i play path of exile a better version of diablo both cpu and gpu intensive to the point that after new years it happened x in one day sometimes my screens shut down for a second and then turn back up after a few minutes the pc freezes ocmpletely again and is unresponsive - gt restart manually only now i knew something was definetely borked so i looked into hardware problems read some stuff online what to do how to create minidumps and how to read them but here is the funny part the only time a minidump was created was on Jan rd and i didnt have mini dumps enabled then so the only minidump available is the default one what i did since then demounted CPU heatsink i had a OEM kit for the processor so the cooler was from intel and the paste that they had on the cooler completely dried out to dust i thought that was the cause of the freezes dusted out the whole pc put new thermal paste on cpu arctic mx- - gt temperatures dropped on the CPU but still crashing - - ran memtest all tests different configurations - gt no errors deinstalled nvidia drivers clean with DDU downloaded newest ones and installed - gt still crashing verified game file integrity on all gmes that crashed - gt checked still crashing did sfc scannow - gt no errors declocked my gpu a bit to see if its causing the crash its factory overclocked all my pc is stock im not overclocking anything ever - gt didnt work still crashed reverted to defaults temperatures of cpu go up to - C at max load gpu temp does not go above the only game that does not crash my pc is CSGO fullhd bluray movies run fine all games run perfectly smooth untill they crash no performance drops beforehand im really feeling depressed because of this before i exchanged the gpu everything worked fine then i switched and got kicked in the balls as i mentioned previously the only minidump in the windows minidump folder was the one from jan rd and its not a -one its a default one no minidumps are created when it freezes i uploaded the dm log but i assume not a lot will be made from it i will also include what bluescreenview said about this minidump - - dmp - - x fffffa e a ntoskrnl exe ntoskrnl exe b c NT Kernel amp System Microsoft Windows Operating System Microsoft Corporation win sp gdr - x ntoskrnl exe b c C Windows Minidump - - dmp - -

http://www.sevenforums.com/bsod-help-support/389069-complete-freeze-no-response-0x00000124-ntoskrnl-exe-4b297c.html
Relevancy 59.77%

Randomly happens, sometimes in a game, sometimes when browsing, sometimes when RDP'ed in, sometimes when unattended. No repro steps yet, just be patient and it will happen. Sometimes when it blue screens, it takes the whole network down spamming the switches and router with packets.

A:Random BSODs, error 0x00000124, caused by ntoskrnl.exe

Blue Screen of Death (BSOD) Posting Instructions

http://www.sevenforums.com/bsod-help-support/289877-random-bsods-error-0x00000124-caused-ntoskrnl-exe.html
Relevancy 58.91%

Hi, these bluescreens and random crashes started about 1 month ago while playing games or when using chrome, ie, firefox. I have located this error with BlueScreenView.exe and like the topic says the thing causing these crashes is ntoskrnl.exe+4ade0c and the bug check code is 0x00000124.

I visited and "fixed" my pc at the local store witch i used to purchase my current pc from, every problem i've had, they have fixed it except this one. They just don't know how to fix it or don't know what the problem is.

Tried to fix pc via installing dvd, it recognized the problem somehow saying the error is something called 1035 but thats it, even my windows installing dvd cant help me this time. any help?
and i attached this minidump rar to this thread.

A:Random windows 7 crashes, ntoskrnl.exe+4ade0c, 0x00000124, 1035.

OK so took a look at the files you provided, and right off the bat I should inform you that a 0x124 error is 9 times out of 10 a hardware problem. looking at the error record we can see that the error its self is a Bus error and in my experience this points to either a CPU failure or a mother board failure, however it could also be overheating or a BIOS bug.


Code:
kd> !errrec fffffa8007e7f6a8
===============================================================================
Common Platform Error Record @ fffffa8007e7f6a8
-------------------------------------------------------------------------------
Record Id : 01ce5dd4a5d37641
Severity : Fatal (1)
Length : 928
Creator : Microsoft
Notify Type : Machine Check Exception
Timestamp : 5/31/2013 7:58:41 (UTC)
Flags : 0x00000002 PreviousError

===============================================================================
Section 0 : Processor Generic
-------------------------------------------------------------------------------
Descriptor @ fffffa8007e7f728
Section @ fffffa8007e7f800
Offset : 344
Length : 192
Flags : 0x00000001 Primary
Severity : Fatal

Proc. Type : x86/x64
Instr. Set : x64
Error Type : BUS error
Operation : Generic
Flags : 0x00
Level : 3
CPU Version : 0x0000000000100f43
Processor ID : 0x0000000000000000

===============================================================================
Section 1 : x86/x64 Processor Specific
-------------------------------------------------------------------------------
Descriptor @ fffffa8007e7f770
Section @ fffffa8007e7f8c0
Offset : 536
Length : 128
Flags : 0x00000000
Severity : Fatal

Local APIC Id : 0x0000000000000000
CPU Id : 43 0f 10 00 00 08 04 00 - 09 20 80 00 ff fb 8b 17
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00

Proc. Info 0 @ fffffa8007e7f8c0

===============================================================================
Section 2 : x86/x64 MCA
-------------------------------------------------------------------------------
Descriptor @ fffffa8007e7f7b8
Section @ fffffa8007e7f940
Offset : 664
Length : 264
Flags : 0x00000000
Severity : Fatal

Error : BUSLG_GENERIC_ERR_*_TIMEOUT_ERR (Proc 0 Bank 4)
Status : 0xfa00000000070f0f
So to start if you are overclocking anything please stop, over clocking pushes hardware beyond its limmits and can often cause these kind of errors.

Next please download one of the following tools to monitor system temperatures:

HWinfo
CPU Z <- this one is for the CUP only and will not monitor any other components temperatures.

Once you have one of those installed plead download and run the following CPU stress test:

Free Software - GIMPS






Quote:
Prime95 Setup:
- extract the contents of the zip file to a location of your choice
- double click on the executable file
- select "Just stress testing"
- select the "Blend" test. If you've already run MemTest overnight you may want to run the "Large FFTs" test instead.
- "Number of torture test threads to run" should equal the number of CPU's times 2 (if you're using hyperthreading).
The easiest way to figure this out is to go to Task Manager...Performance tab - and see the number of boxes under CPU Usage History
Then run the test for 6 to 24 hours - or until you get errors (whichever comes first).
The Test selection box and the stress.txt file describes what components that the program stresses.


Keep an eye on your temperatures and report them here when the test is done/ when it crashes or starts to throw errors.

http://www.sevenforums.com/bsod-help-support/291998-random-windows-7-crashes-ntoskrnl-exe-4ade0c-0x00000124-1035-a.html
Relevancy 58.48%

- x -bit or x bit - the original installed OS on the system I built the system myself - an OEM or full retail version From a MSDN account so full retail I am guessing - OEM came pre-installed on system - Full Retail you purchased it from retailer - What is the age of system hardware less than year not heavily used - What is the age of OS installation have you re-installed the OS less than month Yes ~20 ntoskernel.exe+7cc40 system up min waking from sleep BSOD after Have got BSOD's only after starting the system from sleep after min or so Use it with BSOD ~20 min after waking up system from sleep ntoskernel.exe+7cc40 a TV OR LED monitor Have MSI GTX Cyclone GB installed read somewhere that it could be the cause Haven't gamed much Use it primarily as an HTPC with XBMC hence use the SLEEP function when not watching anything I installed Driver Genius Pro and updated all the drivers I uninstalled Sandboxie and ASUS EPU Engine which I though were potential culprits from reading other forums Please let me know if any other info is needed

A:BSOD ~20 min after waking up system from sleep ntoskernel.exe+7cc40

Security Software (this is to check whether you have security software installed and it is working properly; nothing needs to be done about this at this time):
Code:
msmpeng.exe c:\program files\microsoft security client\antimalware\msmpeng.exe 932 8 200 1380 3/27/2012 4:58 PM 3.0.8402.0 12.48 KB (12,784 bytes) 4/27/2011 6:21 PM
nissrv.exe c:\program files\microsoft security client\antimalware\nissrv.exe 4212 8 200 1380 3/27/2012 4:58 PM 3.0.8402.0 281.52 KB (288,272 bytes) 4/27/2011 6:21 PM
msseces.exe c:\program files\microsoft security client\msseces.exe 2196 8 200 1380 3/27/2012 4:58 PM 2.1.1116.0 1.37 MB (1,436,736 bytes) 6/15/2011 3:35 PM


Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [D:\Kingston\BSODDmpFiles\knutzin\Windows_NT6_BSOD_jcgriff2\032712-9703-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff800`01dda500?
Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Machine Name:
Kernel base = 0xfffff800`0204c000 PsLoadedModuleList = 0xfffff800`02291670
Debug session time: Tue Mar 27 17:57:04.906 2012 (UTC - 6:00)
System Uptime: 0 days 0:22:18.406
Loading Kernel Symbols
...............................................................
................................................................
.........................................
Loading User Symbols
Loading unloaded module list
......
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa800c7eb060, fffff80001dda518, fffffa800d6a1b80}

Unable to load image \SystemRoot\system32\DRIVERS\AiCharger.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for AiCharger.sys
*** ERROR: Module load completed but symbols could not be loaded for AiCharger.sys
Probably caused by : usbhub.sys

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

DRIVER_POWER_STATE_FAILURE (9f)
A driver is causing an inconsistent power state.
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: fffffa800c7eb060, Physical Device Object of the stack
Arg3: fffff80001dda518, Functional Device Object of the stack
Arg4: fffffa800d6a1b80, The blocked IRP

Debugging Details:
------------------


DRVPOWERSTATE_SUBCODE: 3

IMAGE_NAME: usbhub.sys

DEBUG_FLR_IMAGE_TIMESTAMP: 4ce7a68e

MODULE_NAME: usbhub

FAULTING_MODULE: fffff88004ea8000 usbhub

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

BUGCHECK_STR: 0x9F

PROCESS_NAME: System

CURRENT_IRQL: 2

STACK_TEXT:
fffff800`01dda4c8 fffff800`02136cd2 : 00000000`0000009f 00000000`00000003 fffffa80`0c7eb060 fffff800`01dda518 : nt!KeBugCheckEx
fffff800`01dda4d0 fffff800`020d45fc : fffff800`01dda630 fffff800`01dda630 00000000`00000000 00000000`00000001 : nt! ??... Read more

http://www.sevenforums.com/bsod-help-support/221469-bsod-20-min-after-waking-up-system-sleep-ntoskernel-exe-7cc40.html
Relevancy 53.32%

Hey guys so I've been getting some random BSOD errors every few days or so I usually leave my computer on when I am at work or sleep and either when I come home Random BSOD error ntoskrnl.exe (address driver ntoskrnl.exe+74ec0) or wake up my computer is off So I turn it on and it says that the computer didn't Random BSOD error driver ntoskrnl.exe (address ntoskrnl.exe+74ec0) shut down properly when I start up I downloaded the BlueScreenView and noticed I've had some BSOD three times within days One Random BSOD error driver ntoskrnl.exe (address ntoskrnl.exe+74ec0) was a PAGE FAULT IN NONPAGED AREA error which I believe was a RAM problem i bought new RAM and installed it plus OCed it to but I believe it was making my system unstable so I reset the speed to default and haven't gotten that error again but after that I've gotten two IRQL NOT LESS OR EQUAL errors related to ntoskrnl exe I did some research online and from what I read it could be a number of problems I'm just not sure where to start and could really use some guidance and advice I uploaded my dmp files for anyone who knows how to look at these Thank in advance

A:Random BSOD error driver ntoskrnl.exe (address ntoskrnl.exe+74ec0)

Welcome to 7F. I'll take a look at your dumps and see if I can get you BSOD free.


One

 NETGEAR NEUTRAL WIRELESS SOLUTION

Your Netgear Neutral Wireless Solution driver has been flagged. It is quite old a could probably do with updating. Check for updates here
Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {0, 2, 1, fffff800034c88ac}

*** WARNING: Unable to verify timestamp for scmndisp.sys
*** ERROR: Module load completed but symbols could not be loaded for scmndisp.sys
Probably caused by : scmndisp.sys ( scmndisp+16d1 )

Followup: MachineOwner
---------

1: kd> lmvm scmndisp
start end module name
fffff880`0188b000 fffff880`01895000 scmndisp T (no symbols)
Loaded symbol image file: scmndisp.sys
Image path: \SystemRoot\system32\DRIVERS\scmndisp.sys
Image name: scmndisp.sys
Timestamp: Fri May 27 11:30:22 2011 (4DDF7D3E)
CheckSum: 00009C0C
ImageSize: 0000A000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4


Two

 HARDWARE DIAGNOSTICS

A few of your dumps (0x50, 0x124) are pointing towards hardware errors. 0x124s are usually always hardware errors but rarely give us an indication of what the problem actually is. In this case we may have struck lucky as this particular one shows up ASUS AI Suite III. The utilities listed below are the ones I'm concerned about.Attachment 353971


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa800752d028, Address of the WHEA_ERROR_RECORD structure.
Arg3: 00000000bf800000, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000000000124, Low order 32-bits of the MCi_STATUS value.

Debugging Details:
------------------
BUGCHECK_STR: 0x124_GenuineIntel

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

PROCESS_NAME: AISuite3.exe

CURRENT_IRQL: f

ANALYSIS_VERSION: 6.3.9600.17029 (debuggers(dbg).140219-1702) amd64fre
We have seen motherboard packaged utilities cause 0x124s in the past and it could be the case here.
Uninstall ASUS AI Suite III and test the system for stability.
Run SeaTools to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use
Download and run MemTest86+ to test your RAM. RAM - Test with Memtest86+


   Note
Attachment 353972 Run MemTest86+ for at least 8 passes. Ideally set it off before you go to bed and leave it overnight, we're looking for zero errors here. A single error will show something's going bad with your RAM.


Three

 NVIDIA GPU

You've also received a 0x116 which is a VIDEO_TDR_ERROR (Timeout Detection & Recovery) which means your GPU driver has crashed and has failed to recover in time. This could be down to the driver, the card itself or possibly the power to the card.
Code:
******************************************************************************... Read more

http://www.sevenforums.com/bsod-help-support/365399-random-bsod-error-driver-ntoskrnl-exe-address-ntoskrnl-exe-74ec0.html
Relevancy 52.89%

I'm getting random Blue Screens and can't figure out why. I'm not running any hardcore programs. I'm mostly just using Microsoft Office and Firefox. The BSOD's seem to happen when I'm in Outlook, Excel or Firefox. Haven't been able to determine exactly which at the time as I'm moving back and forth between them quite often.

I've tried the SFC command and it didn't find anything. I used BlueScreenViewer but not a lot of help. All drivers for sound and video have been updated. I've also updated the firmware to the Crucial M4 SSD version 040H.

Any insight would be great.

Specs:
Laptop - HP EliteBook 8560w
CPU - Intel i7-2670QM
RAM - Hynix/Hyundai 8.0 GB Ram
SSD - M4-CT256M4 SSD
Audio - AMD High Definition Audio
Video - AMD FirePro M5950
OS - Windows 7 Pro 64-bit

A:Random BSOD Reporting ntoskrnl.exe+75c40 & ntoskrnl.exe+7efc0

Update the firmware of your Crucial M4-CT256M4SSD2.

And, Uninstall McAfee Using McAfee Removal Tool. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.
Download, install and update those, and then run full system scans with both of them, one by one.

Free up the startup.
Click on the Start button
Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the “Startup” tab.
Deselect all items other than the antivirus and touchpad driver SynTPEnh.
Apply > OK
Accept then restart.
Let us know the results.

http://www.sevenforums.com/bsod-help-support/281927-random-bsod-reporting-ntoskrnl-exe-75c40-ntoskrnl-exe-7efc0.html
Relevancy 52.89%

Hi to make things easier for you dxgmms1.sys,ntoskrnl.exe,Ntfs.sys BSOD Address:ntoskrnl.exe+75bc0; below is the Bug Check String Driver and crash address SYSTEM SERVICE EXCEPTION dxgmms sys ntoskrnl exe bc MEMORY MANAGEMENT ntoskrnl exe ntoskrnl exe bc SYSTEM SERVICE EXCEPTION ntoskrnl exe ntoskrnl exe bc NTFS FILE SYSTEM Ntfs sys ntoskrnl exe bc IRQL NOT LESS OR EQUAL ntoskrnl exe ntoskrnl exe bc unrelated how could I make nice table above I have searched the forum Problem BSOD randomly usually graphics related eg flash games in chrome graphics related software Mathematica Problem I use an internet usb G device to connect to internet Every morning the device will not connect to internet and computer will hang on shutting down screen when I BSOD Address:ntoskrnl.exe+75bc0; dxgmms1.sys,ntoskrnl.exe,Ntfs.sys restart I have to manually turn off and back on again I think this may be a dying capacitor on motherboard that needs boot's to get excited Problem Chrome quot aw snap quot happens regularly and is usually flash content related even ad banners seem to cause it from time to time I have reinstalled chrome checked plugins etc etc no luck Internet explorer runs stable but for example in flash games it seems to momentarily freeze and then catch up BSOD Address:ntoskrnl.exe+75bc0; dxgmms1.sys,ntoskrnl.exe,Ntfs.sys with itself again These are moments where I think chrome would have crashed Things I've done SFC scan All's well Memtest I did pass it took an hour everything fine Will put it on over night tonight Checked for latest drivers Also have latest BIOS Checked win update Ran Intel Burn everything ok max stress over Gb RAM run min max temp thank you Noctua NH-C P this is with quiet adaptor too lol Ran malwarebytes found nothing toxic Ran SSDlife Free health SSD seems fine Bought a new motherboard assuming that the current one is going bad I haven't switched over to it yet and thought I should investigate a little further before I do ie bad RAM CPU Power Supply SSD CPU seems fine RAM passed test but will test further My own quot opinion quot until today was that there is a fault on motherboard probably with usb hardware Now I realise that it could be the power supply but I have no way to test this bar buy a new one My analysis bad motherboard or bad PSU Either way not getting away with cheap fix methinks UPDATE I enabled verifier exe using this Driver Verifier - Enable and Disable Windows crashes just before going to desktop I had to boot last known config to get up and running again IE I CAN RELIABLY CREATE BSOD USING VERIFIER EXE WITH GIVEN INSTRUCTIONS So I am going to try focusing on drivers loaded at startup by process of elimination Is there a quick way to find out which one Below is the Check String Driver and crash address for the BSOD's when using verifier exe IRQL NOT LESS OR EQUAL ntoskrnl exe ntoskrnl exe bc DRIVER IRQL NOT LESS OR EQUAL RNDISMPX SYS RNDISMPX SYS a UPDATE If I choose or more non Microsoft drivers in verifier exe I get BSOD different check strings but always at the same address Also computer seems more unstable since engaging with verifier exe I feel I have given a thorough evaluation based on information in this forum and would appreciate feedback from those with more expertise than I UPDATE Another Memtest gave errors on pass Questions any chance poor power supply can cause this anyone have experience increasing voltage to make this go away would bad RAM explain all my problems ok fine i'll go through RAM and the slots and find the bad one sigh major sigh positively tragic sigh UPDATE Started with slot with stick of RAM Did memtest but had an idea I turned on verifier exe with all rd party drivers selected and my theory was to replicate the BSOD I got earlier at startup Went through each slot each RAM combo's of RAM and then to add insult to injury with all sticks in exactly same as before no BSOD Life is tough So maybe RAM wasn't properly seated all this time or maybe I need to test the RAM proper... Read more

A:BSOD Address:ntoskrnl.exe+75bc0; dxgmms1.sys,ntoskrnl.exe,Ntfs.sys

**************UPDATE 5 ****************




The sequence of events went as follows.
RAM test 1 pass was passed. Verifier.exe caused immediate BSOD on windows start when activated. Trying to hunt down drivers revealed any combo of 3 or more drivers gave BSOD at startup. Randomly decided to recheck RAM. Failed memtest after 27 minutes pass 1. Found one RAM stick that passed after one pass slot0. Got fed up of waiting for other slot's. Devised a plan to use verifier to check the RAM by seeing which combo's of RAM sticks gave BSOD on startup. All combo's passed. And now verifier does not give BSOD on any setting. Began to hate life. Cheered myself up with prospect of sleep. Put all 16 Gb RAM in properly and ran mentest for 18 hours, 6 passes. No error. Still no verifier.exe errors when enabled. Wrote this update.


If RAM failed after 27min one test, and then after swapping around a retest of 18 hours has no error, one would presume the RAM may be ok. Equally, I believe one could say the RAM is suspect. So, if the test is failed it really doesn't tell us anything except there is a problem somewhere. But we know there is a problem since we have BSOD!!! If I hadn't rerun the test I wouldn't question the RAM.

So the question is: how do I categorically ensure that a stick of RAM is good? Is memtest on RAM with an alternative working computer enough?



In summary:

I ran memtest for 18 hours, which was 6 passes. No problems detected. Using verifier.exe with protocols given on this forum I no longer get BSOD.

Currently my hypothesis is that the RAM was never seated correctly, or given that it takes a bit of force to insert correctly into motherboard, the flexing has at least temporarily defused whatever fault was causing my BSOD. Tenuous I know. But I really have no other explanation other than something somewhere on the motherboard or power is failing, or even the RAM.

http://www.sevenforums.com/bsod-help-support/351171-bsod-address-ntoskrnl-exe-75bc0-dxgmms1-sys-ntoskrnl-exe-ntfs-sys.html
Relevancy 52.89%

Got my first blue screen of death tonight had firefox opened one watching youtube video another browsing internet After bsod /adress (ntoskrnl.exe+72a40) caused by driver (ntoskrnl.exe) BSOD it restarted i login but just black screen with cursor ctrl alt delete worked so i shut my computer down Boot up normally after check my minidump file bsod cause BSOD caused by driver (ntoskrnl.exe) /adress (ntoskrnl.exe+72a40) by ntoskrnl exe Did little search on google find BSOD caused by driver (ntoskrnl.exe) /adress (ntoskrnl.exe+72a40) has to do with ram and hard drive Downloaded wd data life guard diagnostic for my mechanic drive which is healthy but my ssd on shows failed end to end error rate value threshold worst is all in SMART statue Im not sure if i can trust this wd diagnostic on my crucial ssd there are alot of unknown in SMART statue too Theres no ssd diagnotic for crucial there is a firmware not sure if it helps So i downloaded and ran crystaldiskinfo on my ssd health statues says good it doesnt say end to end error rate like wd Instead same ID B line says quot unused reserve nand blocks quot instead Is my ssd good i havent ran a test on my ram yet This is almost month old build Asrock x x killer i k gtx w crucial x gb crucial gb ssd wd blue tb Heres info of bsod with bluescreenview Bug Check String- IRQL GT ZERO AT SYSTEM SERVICE Bug Check Code - x a Parameter - dc a Parameter - Parameter - Parameter - fffff b Caused By Driver- ntoskrnl exe Caused By Address- ntoskrnl exe a File Description- NT Kernel amp System

A:BSOD caused by driver (ntoskrnl.exe) /adress (ntoskrnl.exe+72a40)

Blue Screen of Death (BSOD) Posting Instructions

http://www.sevenforums.com/bsod-help-support/367819-bsod-caused-driver-ntoskrnl-exe-adress-ntoskrnl-exe-72a40.html
Relevancy 52.89%

Jan , Crash Address All !! BSOD ntoskrnl.exe+80640 the Time ntoskrnl.exe ------------------------------------------- How to Solve - I've uninstalled my windows and recover my laptop with recovery DVD to it's original factory state original windows - Never installed Norton internet security again I'm using Microsoft Security Essentials now - Updated my Graphic Card Driver Intel Wifi Driver Sound Card Driver And some other drivers It's been two months now with no BSOD Thanks to dear Arc and gregrocker Thank you guys ------------------------------------------- Oct ------------------------------------------- Hi guys It's almost a year that I have problems with BSOD ntoskrnl.exe , All the Time !! Crash Address ntoskrnl.exe+80640 BSODs it use to be Atikmdag BSOD but I solve that with updating my Graphic card Driver and Changing Atikmdag sys file in Windows System folder But now it's about months that I get ntoskrnl exe BSODs in lot's of situations Web surfing Windows log on Working with Unity Working with files and Really lot's of Times Even in Safe Mode with Networking I guess it's because of my Network driver because I got BSOD in Safe Mode with Network but I never got a BSOD in normal Safe mode BTW I dunno how to solve it Please Help me these BSODs are sooooooooo annoying Here is my System Specs It's Msi GX CPU Intel R Core TM i CPU M GHz Main MICRO-STAR INTERNATIONAL CO LTD MS- Bios BIOS Date Ver Memory GB HDD ST AS ATA Device Sound Card AMD High Definition Audio Device High Definition Audio Device Graphic ATI Mobility Radeon HD Series - GB GDDR OS Microsoft Windows Ultimate -bit Multiprocessor Free Service Pack it's weird that I've finished writing this without a BSOD Here is the Zip file Created with SF Diagnostic Tool

A:BSOD ntoskrnl.exe , All the Time !! Crash Address ntoskrnl.exe+80640

Code:
fffff800`00b9cc48 fffff880`010b75fcUnable to load image \SystemRoot\System32\Drivers\sptd.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for sptd.sys
*** ERROR: Module load completed but symbols could not be loaded for sptd.sys
sptd+0x4b5fc
Daemon Tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known BSOD causer. Uninstall Alcohol 120% at first. Then download SPTD standalone installer from Disk-Tools.com, and execute the downloaded file as guided below :
Double click to open it.
Click this button only:

If it is grayed out, as in the picture, there is no more SPTD in your system, and you just close the window.
Next uninstall Virtual CloneDrive, as vclone.sys is as fatal as SPTD.sys, too.
After doing these two, report the situation back.

http://www.sevenforums.com/bsod-help-support/309093-bsod-ntoskrnl-exe-all-time-crash-address-ntoskrnl-exe-80640-a.html
Relevancy 52.89%

BSOD random, probably under heavy load situations. I dont know how to do.


DM log collector file attached

many thanks

A:BSOD random most times ntoskrnl.exe+748c0 and ntoskrnl.exe+74ec0

Hi berdini.


Code:
DEFAULT_BUCKET_ID: GS_FALSE_POSITIVE_MISSING_GSFRAME
Scan the system for possible virus infection with the following programs.
Anti-rootkit utility TDSSKiller
Windows Defender Offline
Let us know the results.
____________________________________

Code:
BugCheck F7, {fffff8800a01ff08, f8800125d135, ffff077ffeda2eca, 0}

Probably caused by : Ntfs.sys ( Ntfs!_report_gsfailure+26 )

Followup: MachineOwner
---------

http://www.sevenforums.com/bsod-help-support/373211-bsod-random-most-times-ntoskrnl-exe-748c0-ntoskrnl-exe-74ec0.html
Relevancy 52.46%

When I put my pc in sleep mode it often crashes: the screen goes normally in sleep mode, but the pc continues to stay awake for several minutes than BSOD & restart or BSOD & shut off.
Thanks to BlueScreenView I found what is seemingly the guilty process, but I don't know what to do now.
Attachment 315989
Thanks
Also, sorry for my bad english.

A:BSOD when goes sleep, ntoskrnl.exe+e96d2/ntoskrnl.exe+81e7a

Your HUAWEI Mobile Connect driver is causing issues here.


Code:
*** WARNING: Unable to verify timestamp for ew_jubusenum.sys
*** ERROR: Module load completed but symbols could not be loaded for ew_jubusenum.sys
Probably caused by : ew_jubusenum.sys
If it's a necessary driver then update it but if not then please completely remove it.
I'm not that familiar with such devices but it should be under Network Adapters, right click on the device and click properties, then click on the driver tab and update.


Code:
fffff880`015e0000 fffff880`015fc000 ew_jubusenum T (no symbols)
Loaded symbol image file: ew_jubusenum.sys
Image path: \SystemRoot\system32\DRIVERS\ew_jubusenum.sys
Image name: ew_jubusenum.sys
Timestamp: Mon Aug 20 01:55:56 2012 (50318B1C)
CheckSum: 0001CF99
ImageSize: 0001C000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

http://www.sevenforums.com/bsod-help-support/330151-bsod-when-goes-sleep-ntoskrnl-exe-e96d2-ntoskrnl-exe-81e7a.html
Relevancy 52.03%

I have been getting a ton of bsods I have re installed video drivers, updated and reinstalled windows 8. Did countless hardware test(Video ram, check memory, Cpu test) all passed temperatures stay around 25-35 c.
Recently uninstalled all video drivers and re installed. The bsods sometimes go away for a week or two but come back. and sometimes when it bsods there is a static noise inside of the computer, and the blue screen becomes distorted
Ive attached the dump files, if someone could help me pinpoint the piece of hardware so I can ship it out for repair please.

A:Random BSOD 0x00000124 Hall.dll (Bsod is distorted/static sound)

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 124, {0, ffffe00154472028, bf800000, 124}

Probably caused by : GenuineIntel

Followup: MachineOwner
---------
I know you said you've run hardware tests, but in our experience you have to run specific tests according to a specific regime. Run all of these and report back.

RAM - run a minimum of 8 consecutive passes, no less
RAM - Test with Memtest86+

CPU - run the STANDARD test only
CPU - Stress Test Using IntelBurnTest

Video - run for 20 mins
Video Card - Stress Test with Furmark

Storage - run the SHORT test only using the DOS version
SeaTools for DOS and Windows - How to Use

http://www.sevenforums.com/bsod-help-support/356563-random-bsod-0x00000124-hall-dll-bsod-distorted-static-sound.html
Relevancy 51.6%

I have been getting a ton of bsods I have re installed video drivers, updated and reinstalled windows 8. Did countless hardware test(Video ram, check memory, Cpu test) all passed temperatures stay around 25-35 c.
Recently uninstalled all video drivers and re installed. The bsods sometimes go away for a week or two but come back. and sometimes when it bsods there is a static noise inside of the computer, and the blue screen becomes distorted
Ive attached the dump files, if someone could help me pinpoint the piece of hardware so I can ship it out for repair please.

A:Random BSOD 0x00000124 Hall.dll (Bsod is distorted/static

Hi irunebar12 & Welcome to the forums ^_^,

I have analysed your dump files and below has been provided an analysis of the same for informative purposes :-

Code:
Error : DCACHEL0_WR_ERR (Proc 7 Bank 1)
Status : 0xbf80000000000124
Address : 0x0000000101d80bc0
Misc. : 0x0000000000000086


The dumps are consistent with the error that there was a problem in writing to the L0 Cache of the CPU. That is a dead CPU and hence you are getting the errors even after a fresh install.
See if you are getting any errors in Prime95 according to the below (thanks usasma) -






Prime95 download site: GIMPS - Free Prime95 software downloads - PrimeNet
Prime95 Setup:
- extract the contents of the zip file to a location of your choice
- double click on the executable file
- select "Just stress testing"
- select the "Blend" test. If you've already run MemTest overnight please run the "Small FFTs" test instead. (run all 3 if you find a problem and note how long it takes to error out with each)
- "Number of torture test threads to run" should equal the number of CPU's times 2 (if you're using hyperthreading).
The easiest way to figure this out is to go to Task Manager...Performance tab - and see the number of boxes under CPU Usage History
Then run the test for 6 to 24 hours - or until you get errors (whichever comes first).
Monitor the CPU temperature and DON'T let it exceed 85?C. If it does, then you probably have a CPU cooling problem.
- CPU temps exceeding 60?C can cause errors in Prime95. Fix the cooling solution first, then run Prime95 again.
This won't necessarily crash the system - but check the output in the test window for errors.
The Test selection box and the stress.txt file describes what components that the program stresses.
NOTE: Errors should be considered when:
- the system BSOD's during Prime95
- the system freezes during Prime95 (this is different than the extreme slowness caused by the program using all your RAM and CPU)
- the Prime95 program crashes
- the Prime95 program shows errors in it's display
- there are errors in the Prime95 results file
More details on the use of this test: Torture test your CPU with Prime95



Also, perform the Intel Burn Test according to the below link -
IntelBurnTest - The new stress-testing program
Let me know how it goes ^_^

http://www.eightforums.com/bsod-crashes-debugging/59184-random-bsod-0x00000124-hall-dll-bsod-distorted-static.html
Relevancy 51.6%

Does anyone have any idea what could be causing these BSOD errors? It started with the +74200 error about a month ago (enduser is just now informing IT) and now it is the +73c40. I've already done several Memory tests to no avail. I'm about to just
reimage but don't want to if it's just a driver issue. 

Thanks
TravisD

https://social.technet.microsoft.com/Forums/en-US/afea0b11-7904-4025-8dd6-c76d6cfa02d8/ntoskrnlexe74200-amp-ntoskrnlexe73c40-bsod?forum=w8itprogeneral
Relevancy 51.6%

Hello Recently I got a few bluescreens while playing World of Warcraft which I thought was very weird because all of my hardware is pretty new Here is some info about my computer Intel i - GHZ EVGA GTX SSC super superclocked - the fans are designed not to turn on until card reaches c gb Hyper X Fury ram tb WD Black HDD Windows OS At first I noticed three bluescreens then I used EVGA Precision X with a custom aggressive fan profile and BSOD ntoskrnl.exe+74ec0 ntoskrnl.exe address the problem went away temporarily but then the computer crashed later on I'm not sure if that's relevant or not I ran a diagnostic on my harddrive and processor and both were fine The RAM seems more difficult to test because it said something about usb drives so I decied to stray away from that unless it was absolutely necessary and then get help from someone who BSOD ntoskrnl.exe address ntoskrnl.exe+74ec0 knows what they're doing I am going to upload the dump files that were saved by bluescreenview Any help at all would be greatly appreciated

A:BSOD ntoskrnl.exe address ntoskrnl.exe+74ec0

CRITICAL_OBJECT_TERMINATION BSODs (0xf4) are usually related to an issue with the hard drive.

If you have an SSD, make sure that the firmware is upgraded.

If HDD, run SeaTools for DOS, LONG test - Hard Drive (HDD) Diagnostics - Sysnative Forums

Regards. . .

jcgriff2

`

http://www.techsupportforum.com/forums/f299/bsod-ntoskrnl-exe-address-ntoskrnl-exe-74ec0-975273.html
Relevancy 51.6%

Hi there,

Recently I've been getting BSOD while playing WoW. I'm not sure what details to give other than the dump so I'll just tell you about my computer:

Intel i5 4690 3.5-3.9 GHZ
EVGA GTX 970 SSC (super superclocked - the fans are designed not to turn on until card reaches 60c)
16gb Hyper X Fury ram
1tb WD Black HDD
Windows 7 OS

I noticed that I haven't crashed yet while EVGA Precision X is up (it has a custom aggressive fan curve I made). Maybe this has to do with the fact that it replaces fan drivers, or something? I don't know. I'm pretty clueless as to what's going on because all these parts are pretty new and it only recently started, but it's crashed three times today. Here are the dumps.
Any help you guys can give would be greatly greatly appreciated. Thanks a ton!
 

A:BSOD ntoskrnl.exe address ntoskrnl.exe+74ec0

Any ideas? It happened again while using EVGA Precision.
 

https://forums.techguy.org/threads/bsod-ntoskrnl-exe-address-ntoskrnl-exe-74ec0.1145229/
Relevancy 51.6%

i am having this problem after i change my video cards i upgraded a 460 SLI to a 680
i have run 3dmark11 to try to replicate the bsod or something and nothing happends
i clean my hardware and change the thermal compound then i played some bf3 and paff the same bsod =(

pd: sorry for my english
i forgot to say that i have the last beta drivers from nvidia because with the WHQL i was having problems in gw2
Attachment 231326

A:BSOD playing bf3, hal.dll hal.dll+12a3b , ntoskrnl.exe ntoskrnl.exe+18

Welcome

For the bug check you're getting go through:
Stop 0x124 - what it means and what to try

Also get a latest version of your BIOS.


Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Yusra\Downloads\Fayer\SF_11-09-2012\091112-23509-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
Machine Name:
Kernel base = 0xfffff800`03667000 PsLoadedModuleList = 0xfffff800`038ab670
Debug session time: Wed Sep 12 06:29:05.072 2012 (UTC + 6:00)
System Uptime: 0 days 7:04:57.025
Loading Kernel Symbols
...............................................................
................................................................
................................
Loading User Symbols
Loading unloaded module list
.....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 124, {0, fffffa80086cf028, ba000000, 400405}

*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : hardware

Followup: MachineOwner
---------

5: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa80086cf028, Address of the WHEA_ERROR_RECORD structure.
Arg3: 00000000ba000000, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000000400405, Low order 32-bits of the MCi_STATUS value.

Debugging Details:
------------------
BUGCHECK_STR: 0x124_GenuineIntel

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

PROCESS_NAME: System

CURRENT_IRQL: f

STACK_TEXT:
fffff880`030acb58 fffff800`03630a3b : 00000000`00000124 00000000`00000000 fffffa80`086cf028 00000000`ba000000 : nt!KeBugCheckEx
fffff880`030acb60 fffff800`037f3b03 : 00000000`00000001 fffffa80`0860b890 00000000`00000000 fffffa80`0860b8e0 : hal!HalBugCheckSystem+0x1e3
fffff880`030acba0 fffff800`03630700 : 00000000`00000728 fffffa80`0860b890 fffff880`030acf30 fffff880`030acf00 : nt!WheaReportHwError+0x263
fffff880`030acc00 fffff800`03630052 : fffffa80`0860b890 fffff880`030acf30 fffffa80`0860b890 00000000`00000000 : hal!HalpMcaReportError+0x4c
fffff880`030acd50 fffff800`0362ff0d : 00000000`00000008 00000000`00000001 fffff880`030acfb0 00000000`00000000 : hal!HalpMceHandler+0x9e
fffff880`030acd90 fffff800`03623e88 : 0000003b`5e9a7a72 fffffa80`0ae15ac8 00000000`00000000 00000000`00000000 : hal!HalpMceHandlerWithRendezvous+0x55
fffff880`030acdc0 fffff800`036e4aac : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : hal!HalHandleMcheck+0x40
fffff880`030acdf0 fffff800`036e4913 : 00000000`00000000 00000... Read more

http://www.sevenforums.com/bsod-help-support/252352-bsod-playing-bf3-hal-dll-hal-dll-12a3b-ntoskrnl-exe-ntoskrnl-exe-18-a.html
Relevancy 51.6%

I keep getting a BSOD (Critical_Object_Termination) but have no idea what is causing the issue. I tried in vain to debug my own minidump files but ended up getting nowhere.

So far i have run MemTest over the weekend with 107 passes. I also ran Prime95 64-bit for 4 hours on each of the FFT tests without error.

I have enabled driver verifier (following the guide on this site) and this has not caused anynew BSOD's.

I also get a random BSOD on startup but it has happened so infrequently i have been unable to boot with disable automatic restart on system failure enabled to capture the stop code.

I really could do with some expert advice please.

This is my first post so i apologise if i have missed something important but i have tried to read as much info as possible before posting.

A:BSOD Ntoskrnl.exe+7efc0 and Ntoskrnl.exe+75c40

Unusual one you got there think it may be a windows problem please run sf tool and upload all files not just dumps and try running an sfc scan
SFC /SCANNOW Command - System File Checker option 2

Check system temperatures also

http://www.sevenforums.com/bsod-help-support/281212-bsod-ntoskrnl-exe-7efc0-ntoskrnl-exe-75c40.html
Relevancy 51.17%

Hello fellas It's now like year BSOD and A0000001 BSOD random 0x00000124, without Shutdowns that im having troubles with my computer I had really many patience with it tried really anything i BSOD 0x00000124, A0000001 and random Shutdowns without BSOD could but now im done with my nerves and asking you to help Problem Many different BSOD's sometimes PC just Shutdown as if i took out the power cable And it freeze sometimes untill i reset it - The picture freezes sound stopped nothing changes even with ctrl alt del The Windows System Logs are full with Criticals Errors and Warnings They occur randomly not just while im playing d Games but even without any programms running Since i bought that custom hardware im having those BSODS Shutdowns etc sometimes x a week sometimes x day for many days in a row I guess it's a Hardware failure because i tried like Windows reinstalls Diferent Versions of Win with same bad result I've bought those parts x Phenom Processor with silent Cool Fan W power supply ASUS M A TD-V Radeon HD x GB Ram with passive cooling x TB WDC SATA What i already tried a After like year i asked the seller to help out He replaced following hardware motherboard power supply graphic card It didn't helped b I tried to remove x RAM then tried only with the other one c Installed windows on different Harddrives d Defragmented harddrives e updated drivers ran many quot optimizing quot tools btw they destroy only the system instead to improve it mostly f removed the dust cleaned the fan's replaced the processor thermal paste many times And its still the same shit What i guess is that some other Hardware is not working well but im not able to buy every part new and try to figure what it is by replacing all hardware pieces Because i can't know if the new hardware from the seller isn't broken aswell like the part i returned for it The only thing i didnt try to replace is the processor I upload the SF Diagnostic result and hope you could help me out I can't afford to buy a whole new PC but im suggesting its the only way out of it

A:BSOD 0x00000124, A0000001 and random Shutdowns without BSOD

The zip you uploaded does not contain any crash dump.

Follow it: Dump Files - Configure Windows to Create on BSOD
Go to Option Two, Point 2. Download the .reg file and merge it in registry by double clicking it.

Now wait for another BSOD. When it occurred, search the .dmp files manually in the default path: C:\Windows\Minidump or %SystemRoot%\Minidump. See if the crash dump is recorded or not (hopefully it will be recorded).Post it following the Blue Screen of Death (BSOD) Posting Instructions.

Also the MSINFO32 you uploaded it corrupt. So upload your MSINFO32.nfo file.
Click on the start button
Type "msinfo32" (without quotes) in the search bar of the start menu, click the resulting link. It will open the System Information window.
File>Save. In the "File Name" filed, put "MSINFO32" (without Quote), give the save location to desktop, and click the "save" button.
Give the time for processing, it will save a .nfo file on your desktop.
Zip it, and upload it following the instruction.
BTW, a stop 0x124 is a hardware issue, and you may follow Stop 0x124 - what it means and what to try. ATM cannot suggest anything more due to lack of data.

And a stop 0xA0000001 is associated with ATI/AMD display driver; inbuilt and inherent in it. If this error is followed by a driver update, try to Driver Rollback. If it is taking place irrespective of the driver version, change the GPU.

http://www.sevenforums.com/bsod-help-support/290477-bsod-0x00000124-a0000001-random-shutdowns-without-bsod.html
Relevancy 50.31%

Hi all I just built this PC recently week ago have not encountered any problems until recently when I've been cpu usage BSOD 0x00000124 heavy BSOD under hal.dll trying to overclock it My motherboard is the Asrock Z Pentium anniversary board the one that automatically overclocks with the touch of a button I choose what speed I want and it sets the multiplier and core voltage It lets you choose if you want to OC it to ghz ghz ghz I currently have it set at ghz which seems to be pretty tame compared to other z g owners I have monitors connected to the PC and it will only bluescreen when i push the cpu to its limit Ie when I'm watching Youtube Twitch tv at HD and playing League of Legends or Dark Souls on the other screen When I am doing this my cpu temp stays between - C while at idle it hovers around C and has never BSOD at idle I've noticed that before BSOD occur there will be some latency stuttering internet lag and I'm hoping the problem is outdated drivers specifically the realtek BSOD under heavy cpu usage BSOD 0x00000124 hal.dll ethernet controller Problem signature Problem Event Name BlueScreen OS Version Locale ID Extra information about the problem BCCode BCP BCP FFFFFA BCP BF BCP OS Version Service Pack Product I am aware of the long-term risk of overclocking my pentium g but I am just using it as a stopgap until the new chips come out Any help advice will be much appreciated

A:BSOD under heavy cpu usage BSOD 0x00000124 hal.dll

Run 5 tests on IBT at MAXIMUM setting and report the temperatures. Read very carefully before starting.

CPU - Stress Test Using IntelBurnTest

http://www.sevenforums.com/bsod-help-support/358549-bsod-under-heavy-cpu-usage-bsod-0x00000124-hal-dll.html
Relevancy 49.88%

Hey guys..
Didnt know who else to turn to.. Ive been getting some bluescreens lately.. Have not always gotten them and cant think of anything new really that has been resposinble.. Nothing new in my setup or anything..

as I said been working fine for long time then suddenly every now and then it just dies..
I have 3 harddrivers, c: which is OS harddrive has 15gb free space. other is d: and is a partition on c: which has not much space left, just a few GB. could this be the problem ( that I dont have much GB left ) cus other then this nothing has really changed on my computer past time.

I attached a dmp file.. Thx guys!

A:BSOD 0x00000124

look at this:
http://www.sevenforums.com/crash-loc...-what-try.html
http://www.sevenforums.com/crashes-d...ddmkm-sys.html
BSOD: Stop 0x00000124
http://www.sevenforums.com/crashes-d...ssistance.html


btw: no dump file is attached

http://www.sevenforums.com/bsod-help-support/95955-bsod-0x00000124.html
Relevancy 49.88%

I have a system that craches with x The system Windows Ultimate x W psu phenom II T processor M A TD usb Kingston HyperX x MB DDR MHz CL Kingston KHX C D B K GX Gainward gtx GS Windows is fully updated and the system uses all the newest drivers I have looked at the dump file and what I can see it is a hardware issue but which one Code Microsoft R Windows Debugger Version AMD Copyright c 0x00000124 BSOD Microsoft Corporation All rights reserved Loading Dump File C Users Thomas Downloads dump rar - - dmp Mini Kernel Dump File Only registers and stack trace are available Symbol search path is SRV c XPsymbols http msdl microsoft com download symbols Executable search path is Windows Kernel Version Service Pack MP procs Free x Product WinNt suite TerminalServer SingleUserTS Built by amd fre win sp gdr - Machine Name Kernel base xfffff e PsLoadedModuleList xfffff Debug session time Tue Nov UTC System Uptime days Loading Kernel Symbols Loading User Symbols Loading unloaded module list Bugcheck Analysis Use analyze -v to get detailed debugging information BugCheck fffffa b Probably caused by hardware Followup MachineOwner --------- kd BSOD 0x00000124 gt analyze -v Bugcheck Analysis WHEA UNCORRECTABLE ERROR A fatal hardware error has occurred Parameter identifies the type of error source that reported the error Parameter holds the address of the WHEA ERROR RECORD structure that describes the error conditon Arguments Arg Machine Check Exception Arg fffffa Address of the WHEA ERROR RECORD structure Arg b High order -bits of the MCi STATUS value Arg Low order -bits of the MCi STATUS BSOD 0x00000124 value Debugging Details ------------------ BUGCHECK STR x AuthenticAMD CUSTOMER CRASH COUNT DEFAULT BUCKET ID VISTA DRIVER FAULT PROCESS NAME iexplore exe CURRENT IRQL f STACK TEXT fffff b fffff da b fffffa b nt KeBugCheckEx fffff b fffff f f fffffa bea fffffa bef hal HalBugCheckSystem x e fffff b fffff d fffffa bea fffff eb nt WheaReportHwError x fffff bb fffff d fffffa bea fffff eb fffffa bea hal HalpMcaReportError x c fffff d fffff e f aab fffff f hal HalpMceHandler x e fffff d fffff e d c hal HalHandleMcheck x fffff d fffff e d nt KxMcheckAbort x c fffff eb de nt KiMcheckAbort x cf x de STACK COMMAND kb FOLLOWUP NAME MachineOwner MODULE NAME hardware IMAGE NAME hardware DEBUG FLR IMAGE TIMESTAMP FAILURE BUCKET ID X x AuthenticAMD PROCESSOR CACHE BUCKET ID X x AuthenticAMD PROCESSOR CACHE Followup MachineOwner

A:BSOD 0x00000124

Hi.

Stop 0x124 error?
Is better though for us to have the minidumps.
http://www.sevenforums.com/crashes-d...tructions.html

http://www.sevenforums.com/bsod-help-support/198845-bsod-0x00000124.html