Windows Support Forum

BSOD ntoskrnl.exe+26ee0 ntoskrnl.exe+7cc40

Q: BSOD ntoskrnl.exe+26ee0 ntoskrnl.exe+7cc40

Hi, I've been having this BSOD appear very randomly.

IRQL_NOT_LESS_OR_EQUAL 0x0000000a
(all reports in .rar file)

Sometimes within 1 hour, other times as long as 24hrs+. I've got my BIOS/Drivers up to date for my CPU, Graphics Card, and Motherboard. I've rigorously tested my memory and have never had any issues arise.

It has occurred during
3d gaming,
when the system has been idle,
also when browsing with firefox or ie.

Any help at all would be appreciated, I've struggled with this BSOD for years I would love to finally find whats causing it.

Thank you.

Relevancy 100%
Preferred Solution: BSOD ntoskrnl.exe+26ee0 ntoskrnl.exe+7cc40

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: BSOD ntoskrnl.exe+26ee0 ntoskrnl.exe+7cc40

Quote: Originally Posted by postal


Hi, I've been having this BSOD appear very randomly.

IRQL_NOT_LESS_OR_EQUAL 0x0000000a
(all reports in .rar file)

Sometimes within 1 hour, other times as long as 24hrs+. I've got my BIOS/Drivers up to date for my CPU, Graphics Card, and Motherboard. I've rigorously tested my memory and have never had any issues arise.

It has occurred during
3d gaming,
when the system has been idle,
also when browsing with firefox or ie.

Any help at all would be appreciated, I've struggled with this BSOD for years I would love to finally find whats causing it.

Thank you.


First lets start with asacpi.sys yours dated 2005
1-ASACPI.SYS

The pre 2009 version of this driver is a known BSOD cause.

Please visit this link: ASUS teK Computer Inc. -Support- Drivers and Download P7P55D LE
ASUSTeK Computer Inc. -Support- Drivers and Download P7P55D LE

Scroll down to the Utilities category, then scroll down to the "ATK0110 driver for WindowsXP/Vista/Windows 7 32&64-bit" (it's about the 12th item down).
Download and install it.
Go to C:\Windows\System32\drivers to check and make sure that the ASACPI.SYS file is date stamped from 2009 or 2010 (NOT 2005).

http://www.sevenforums.com/bsod-help-support/194256-bsod-ntoskrnl-exe-26ee0-ntoskrnl-exe-7cc40.html
Relevancy 92.07%

I'm working on my parents computer and they are randomly receiving BSODs. They tell me they usually receive them when browsing the internet and running several other programs at once. They are using a Dell Studio XPS 7100 running Windows Home Premium.

My guess is that the issue is driver related. The reason I think this is because I ran the driver verifier and it created a BSOD (this also created the last mini dump file in the attached files). The BSOD message said "A device driver attempting to corrupt the system has been caught. The faulty driver currently on the kernel stack must be replaced with a working version."

Would someone mind looking through the attached documents and letting me know if you see any problems?

A:Random BSODs ntoskrnl.exe+26ee0 & ntoskrnl.exe+5063dc

  
Quote: Originally Posted by RossTTU


I'm working on my parents computer and they are randomly receiving BSODs. They tell me they usually receive them when browsing the internet and running several other programs at once. They are using a Dell Studio XPS 7100 running Windows Home Premium.

My guess is that the issue is driver related. The reason I think this is because I ran the driver verifier and it created a BSOD (this also created the last mini dump file in the attached files). The BSOD message said "A device driver attempting to corrupt the system has been caught. The faulty driver currently on the kernel stack must be replaced with a working version."

Would someone mind looking through the attached documents and letting me know if you see any problems?


The verified crash was related to C:\Program Files (x86)\Lavasoft\Ad-Aware\KernExplorer64.sys

I would remove Ad-aware AT LEAST TO TEST

http://www.sevenforums.com/bsod-help-support/217564-random-bsods-ntoskrnl-exe-26ee0-ntoskrnl-exe-5063dc.html
Relevancy 86.49%

Hey what's up I recently started getting seemingly random BSOD's about two months etc. ntoskrnl.exe+7c1e9, 26ee0, c8588, BSOD's, 18d513, Random ago but since they were so infrequent I didn't pay attention to them However now they've started to happen almost every day from what I can see without any pattern only that my computer would usually be running either a java-based program or game at the time I've looked for similar problems solutions for this sort of thing but the closest one I could find had to do with an outdated ASACPI sys file and incorrect OC settings but I haven't overclocked my computer and my ASACPI sys file has a time-stamp of I'm running Windows Home Premium x not OEM and my computer is mostly made up of parts less than a year old with the exception of my power supply video-card and hard-drives which were ripped from my last computer I don't know exactly where the box for Random BSOD's, ntoskrnl.exe+7c1e9, 26ee0, c8588, 18d513, etc. my motherboard is but I think it's an ASUS M A -V but I can double-check if necessary The required files minidumps are attached to the post Please get back to me as soon as you can

A:Random BSOD's, ntoskrnl.exe+7c1e9, 26ee0, c8588, 18d513, etc.

Hi.
Update the software\driver for your Samsung printer.

Is old from 12-Aug-05 mo way to be compatible with windows 7.

Samsung
Also,one of your minidumps points to Stop 0x124 error


Stop 0x124 - what it means and what to try

http://www.sevenforums.com/bsod-help-support/203723-random-bsods-ntoskrnl-exe-7c1e9-26ee0-c8588-18d513-etc.html
Relevancy 82.77%

Have received this BSOD several times while the machine has been in Sleep Mode. Normal operation is to turn the monitor off and put the computer into that mode during the night. The BSOD is the normal DRIVER_POWER_STATE_FAILURE ntoskrnl.exe caused by address ntoskrnl.exe+7cc40.

Desktop Computer less than a year old. OEM version of Win7 Pro 64-bit pre-installed at time of purchase. Just updated computer info for this machine.,
Uploaded Health Report.html and a Windows_NT6_BSOD_v3.03_jcgriff2_.exe.zip. Did not see the Health Report upload so I redid it as a zip file.
If I missed anything, please let me know. Really do appreciate your help to resolve this. Have not had a BSOD at any other time than at Sleep Mode to the best of my knowledge.

The 031712-109263-01 is the zip of my minidump file on the day of the event.

A:BSOD ntoskrnl.exe+7cc40

You uploaded the application instead of the data.
Try this method.

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

If you are overclocking STOP

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.



To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

http://www.sevenforums.com/bsod-help-support/219840-bsod-ntoskrnl-exe-7cc40.html
Relevancy 82.77%

Hi I have a new rig i built my self and it runs perfectly except the occasional BSOD and i cant for the life of me work out why - - dmp BAD POOL HEADER x fffff a a ff af a a fffff a a ntoskrnl exe ntoskrnl exe cc NT Kernel amp System Microsoft Windows Operating System Microsoft Corporation win sp gdr - x ntoskrnl exe cc C Windows Minidump - - dmp - - dmp PAGE FAULT IN NONPAGED AREA x fffffa fffff b d ntoskrnl exe ntoskrnl exe cc NT Kernel amp System Microsoft Windows Operating System Microsoft Corporation win BSOD's ntoskrnl.exe+7cc40 sp gdr - x ntoskrnl exe cc C Windows Minidump - - dmp - - dmp KMODE EXCEPTION NOT HANDLED x e ntoskrnl exe ntoskrnl exe cc NT Kernel amp System Microsoft Windows Operating System Microsoft Corporation win sp gdr - x ntoskrnl exe cc C Windows Minidump - - dmp Basically i bought one of the affected mother boards before the b revision for sandy bridge systems I managed to get an updated mobo via RMA So i changed mother boards ntoskrnl.exe+7cc40 BSOD's over Then a few weeks later i changed my RAM old was Corsair XMS mhz gb new is Corsair Vengeance mhz ntoskrnl.exe+7cc40 BSOD's gb I also started off with a F Corsair ssd gb and change dthat to a new force gb ssd Since i reinstalled my OS win x i keep getting BSOD's I have formatted and reinstalled and the same happens Please any assistance would be greatly appreciated Attached my minidump folder Thanks in advance

A:ntoskrnl.exe+7cc40 BSOD's

  
Quote: Originally Posted by Kristofaaa


Hi,

I have a new rig i built my self and it runs perfectly except the occasional BSOD and i cant for the life of me work out why...

091711-6006-01.dmp 17/09/2011 21:33:23 BAD_POOL_HEADER 0x00000019 00000000`00000003 fffff8a0`1205a820 ff8af8a0`1205a820 fffff8a0`1205a820 ntoskrnl.exe ntoskrnl.exe+7cc40 NT Kernel & System Microsoft? Windows? Operating System Microsoft Corporation 6.1.7601.17640 (win7sp1_gdr.110622-1506) x64 ntoskrnl.exe+7cc40 C:\Windows\Minidump\091711-6006-01.dmp 8 15 7601 293,064

091311-5896-01.dmp 13/09/2011 18:56:14 PAGE_FAULT_IN_NONPAGED_AREA 0x00000050 fffffa80`55685460 00000000`00000001 fffff880`06b9d316 00000000`00000005 ntoskrnl.exe ntoskrnl.exe+7cc40 NT Kernel & System Microsoft? Windows? Operating System Microsoft Corporation 6.1.7601.17640 (win7sp1_gdr.110622-1506) x64 ntoskrnl.exe+7cc40 C:\Windows\Minidump\091311-5896-01.dmp 8 15 7601 291,016

091311-7722-01.dmp 13/09/2011 13:40:14 KMODE_EXCEPTION_NOT_HANDLED 0x0000001e 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 ntoskrnl.exe ntoskrnl.exe+7cc10 NT Kernel & System Microsoft? Windows? Operating System Microsoft Corporation 6.1.7601.17640 (win7sp1_gdr.110622-1506) x64 ntoskrnl.exe+7cc10 C:\Windows\Minidump\091311-7722-01.dmp 8 15 7601 288,232

Basically i bought one of the affected mother boards before the b3 revision for sandy bridge systems. I managed to get an updated mobo via RMA.

So i changed mother boards over. Then a few weeks later i changed my RAM, old was Corsair XMS 1600mhz 4gb, new is Corsair Vengeance 1866mhz 8gb.

I also started off with a F60 Corsair ssd 60gb and change dthat to a new force 3 120gb ssd.

Since i reinstalled my OS (win 7 x64) i keep getting BSOD's. I have formatted and reinstalled and the same happens.

Please any assistance would be greatly appreciated...

Attached my minidump folder...

Thanks in advance.


Easy, these were related to your C-media Audio driver. I would update to the newest version below.

C-Media Electronics, Inc.


Since pool corruption was involved I would run these two tests.
1-Memtest.

*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program.

*Boot from the CD, and leave it running for at least 6 or 8 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

RAM - Test with Memtest86+

2-Driver verifier






Quote:
I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wai... Read more

http://www.sevenforums.com/bsod-help-support/187229-ntoskrnl-exe-7cc40-bsods.html
Relevancy 82.77%

Im getting massive BSOD's every day. I can't even use this computer most hours and it'll probably BSOD in a few minuetes.

Could someone look at the txt file I included and point me in the right direction? Or if I need more info please tell me!!! Because Im going crazy with this BSOD.

A:BSOD ntoskrnl.exe 7cc40

Please follow this post and reply accordingly.

http://www.sevenforums.com/crashes-d...tructions.html

http://www.sevenforums.com/bsod-help-support/221428-bsod-ntoskrnl-exe-7cc40.html
Relevancy 81.84%

10 days ago i have BSOD frequently. Even when the computer rest appears suddenly a blue screen. SOmetimes when i navigate on Internet.
I have to types of BSOD:
IRQL_NOT_LESS_OR_EQUAL caused by the adress ntoskrnl.exe+7cc40
BSOD caused by hal.dll+12a3b
My OS is Win7 Home Premium SP1. I send you the report of BlueScreenView with more details.
Could you tell me please some advice?
Thank you very much

A:BSOD IRQL_NOT_LESS_OR_EQUAL ntoskrnl.exe+7cc40

NOTE: Please provide the following information for a more detailed response: http://www.techsupportforum.com/foru...ta-452654.html

While waiting for a reply:

I suggest starting all troubleshooting with the following diagnostic tests (located at this link: Hardware Diagnostics ). They'll save you a lot of time and heartache if there is a hardware failure, and you'll have the disks on hand in case you need them in the future:

Quote:




H/W Diagnostics:
Please start by running these bootable hardware diagnostics:
Memory Diagnostics (read the details at the link)
Hard Drive Diagnostics (read the details at the link) - Test ALL of the hard drives.

Also, please run one of these free, independent online malware scans to ensure that your current protection hasn't been compromised: Free Online AntiMalware Resources (read the details at the link)
There are also free, bootable antivirus disks at this link: Free Online AntiMalware Resources - Bootable Disks




Also, please run Driver Verifier according to these instructions: Driver Verifier Settings

http://www.techsupportforum.com/forums/f299/bsod-irql_not_less_or_equal-ntoskrnl-exe-7cc40-633924.html
Relevancy 81.84%

Hello,

I am getting BSOD every couple of days with no apparent reason sometime with doing virus scans, running windows movie maker and sometime while idle. Not sure what's going on please help - I have attached .dmp for assessment.

http://www.sevenforums.com/attachmen...1&d=1331424155

Hopefully someone can advise me on this not really a huge problem but would like to resolve it before it becomes one.

A:Random BSOD - ntoskrnl.exe (nt+7cc40) Please Help

Related to your directx

Diagnosing basic problems with DirectX

http://www.sevenforums.com/bsod-help-support/218697-random-bsod-ntoskrnl-exe-nt-7cc40-please-help.html
Relevancy 81.84%

hi here is the issue about two weeks ago Windows BSOD 7 ntoskrnl.exe+7cc40 - I took my laptop to the service because its disk drive not seeing any cd or dvd than they changed it with a new one after that they said we updated the bios after or days later BSOD Windows 7 - ntoskrnl.exe+7cc40 I'm on the Internet I got blue screen error driver power state failure I tried to update some of my driver such as graphic driver and tried to update windows it did't work third crash happened when I was trying to model something I opened the program at the same time rhino solid dsmax last crash was happened this morning when I was trying to restart my computer it says closing the pc but after - minutes later it crashes in addition my laptop opens very slowly than usual Some information about the crash Sorunlu Olay Ad BlueScreen OS S r m Yerel Kimlik BCCode f BCP BCP FFFFFA DA BCP FFFFF BA BCP FFFFFA E B OS Version Service Pack Product I check my pc with bluescreenview it says ntoskrnl cc error but don't know what to do and sorry for my bad English I really need your help Thank you in advance

A:BSOD Windows 7 - ntoskrnl.exe+7cc40

Welcome aboard, Brabbit.

Fresco Logic xHCI (USB3) Device Driver is initially identified as the cause of the crash.

Code:
Irp is active with 4 stacks 3 is current (= 0xfffffa8005e36410)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace. Pending has been returned
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 16, 0] 0 0 fffffa800667da10 00000000 00000000-00000000
\Driver\pci
Args: 00000000 00000000 00000000 00000005
>[ 16, 2] 0 e1 fffffa800860dac0 00000000 fffff800032e31b0-fffffa800e4492c0 Success Error Cancel pending
Unable to load image \SystemRoot\system32\DRIVERS\FLxHCIc.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for FLxHCIc.sys
*** ERROR: Module load completed but symbols could not be loaded for FLxHCIc.sys
\Driver\FLxHCIc nt!PopSystemIrpCompletion
Args: 00016600 00000000 00000006 00000005
[ 0, 0] 0 0 00000000 00000000 00000000-fffffa800e4492c0

Args: 00000000 00000000 00000000 00000000
And, the driver is very old.

Code:
start end module name
fffff880`049a5000 fffff880`049f5000 FLxHCIc T (no symbols)
Loaded symbol image file: FLxHCIc.sys
Image path: \SystemRoot\system32\DRIVERS\FLxHCIc.sys
Image name: FLxHCIc.sys
Timestamp: Thu Feb 24 14:29:52 2011 (4D661E08)
CheckSum: 0004C3F2
ImageSize: 00050000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
You try to update it from FRESCO LOGIC INC.===Leap into SuperSpeed===.

The Device Object of the blocked IRP is really interesting.

Code:
Device object (fffffa800860dac0) is for:
InfoMask field not found for _OBJECT_HEADER at fffffa800860da90
\Driver\FLxHCIc DriverObject fffffa8008668910
Current Irp 00000000 RefCount 0 Type 00000022 Flags 00002050
DevExt fffffa8008af1370 DevObjExt fffffa800860dc30
ExtensionFlags (0000000000)
Characteristics (0x00000100) FILE_DEVICE_SECURE_OPEN
AttachedTo (Lower) fffffa800667d7f0*** WARNING: Unable to verify timestamp for ACPI.sys
*** ERROR: Module load completed but symbols could not be loaded for ACPI.sys
Unable to load image \SystemRoot\System32\Drivers\sptd.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for sptd.sys
*** ERROR: Module load completed but symbols could not be loaded for sptd.sys
\Driver\ACPI
Device queue is not busy.
Daemon Tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known BSOD causer. Uninstall the program at first. Then download SPTD standalone installer from Disk-Tools.com, and execute the downloaded file as guided below :
Double click to open it.
Click this button only:

If it is grayed out, as in the picture, there is no more SPTD in your system, and you just close the window.
From another crash dump, that is alos a stop 0x9F; showing a different crasher. Atheros Bluetooth Driver.

Code:
Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 e1 fffffa8009de5030 00000000 00000000-00000000 pending
Unable to load image \SystemRoot\system32\DRIVERS\btfilter.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for btfilter.sys
*** ERROR: Module load completed but symbols could not be loaded for btfilter.sys
\Driver\BtFilter
Args: 00000000 00000001 00000001 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-fffffa800ec5dc90

Args: 00000000 00000000 00000000 00000000
Update it from ATHEROS drivers for Microsoft Windows (Atheros?????).

Apparently there are no other errors, but as the system is crashing, you should pay attention to these suggestions, too.

Free up the startup.
Click on the Start button
Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the “Sta... Read more

http://www.sevenforums.com/bsod-help-support/273475-bsod-windows-7-ntoskrnl-exe-7cc40.html
Relevancy 81.84%

So I do have a OC, but it was stable (Intel Burn Test, Prime95). I was playing the Binding of Isaac (flash game on steam). What is most likely the cause here?

A:Had a random BSoD, not sure what the cause, ntoskrnl.exe+7cc40, dmp in

Oh I should note my PC first froze (but my mouse could still move) for a while, before the blue screen came.

Could flash have caused this? I did get a Flash update today.

http://www.sevenforums.com/bsod-help-support/198614-had-random-bsod-not-sure-what-cause-ntoskrnl-exe-7cc40-dmp.html
Relevancy 81.84%

Greetings Here is the issue About mid December I began having problems with 7 ntoskrnl.exe+7cc40 Windows BSOD - random BSOD's The initial tell-tale signs led to numerous issues I began slowly eliminating causes until I was left with Re-Installing Windows Since then I have had the same issues over and over again Here BSOD Windows 7 - ntoskrnl.exe+7cc40 are the corrective actions I have taken thus far from most recent to windows install In Bios I manually set timing of RAM to manufacture's recommendations from Website Identified and removed bad RAM Verified remaining RAM with hours of Memtest passed defects Replaced Motherboard M A T USB Used known functional video card uninstalled driver of old card before install Tested computer with each stick of RAM using different slots Clean installed windows ---- I included all dump files in the zip file since install but the last - are after the new motherboard and the last are after the verified RAM The very last dump was recorded using Driver Verifier I will continue to stress test my machine with driver verifier and post the dump files as I get them I am going on months and if this doesn't get fixed soon I'm trying a hammer lol

A:BSOD Windows 7 - ntoskrnl.exe+7cc40

As Promised:

Driver Verifier enabled as directed and ran it into the ground.

Seem to be alot of views... Is my problem common or just scaring away the Gurus?

Here are a few things I have tried.

Rolled back AMD driver to last version, Crashed.

Removed all peripherals except USB keyboard and Mouse and monitor.

Ran GPUZ through a crash. Log attached.

I will be going to Saphire's site and downloading any driver they have listed there for my Video Card (Radeon HD 6850)

Please help if you can.

http://www.sevenforums.com/bsod-help-support/214051-bsod-windows-7-ntoskrnl-exe-7cc40.html
Relevancy 81.84%

For two BSOD every ntoskrnl.exe+7cc40 time weeks I am getting or times a day the same BSOD with ntoskrnl exe cc with my Dell z Mostly it happens when I am not working on the computer But also it happens during my work BSOD every time ntoskrnl.exe+7cc40 but I did not notice a real pattern My computer is a Dell z of months old bits My Windows Home Premium was installed by Dell And I have updated it normally Service Pack I also use System Mechanic The only strange thing I notice already for a long time before the BSOD happened the first time that the computer does not go to sleep when it is not on battery but stays alive including the screen the whole night Or when it is on battery the next morning there is no energy any more But I don't know if there is any connection Of course I changed the settings many times but no effect Attached the files the way it was asked I really hope someone can give me a direction the find the solution Thank you in advance from Amsterdam Holland Topdognl

A:BSOD every time ntoskrnl.exe+7cc40

These were Related to NETwNs64.sys Wireless WiFi Link Driver from Intel Corporation. I would re-install the newest version available.

http://www.sevenforums.com/bsod-help-support/210952-bsod-every-time-ntoskrnl-exe-7cc40.html
Relevancy 81.84%

The BSODs appear random - eg once during surfing with IE9, another time while using Photoshop. BSODs not regular or often - maybe once a fortnight - but seemingly completely unpredictable.

MemTest run (just for an hour) didn't show up any problems.

I'd be grateful for a steer on what can be causing the BSODs.

Thanks

A:Intermittent BSOD ntoskrnl.exe (nt+7cc40)

  
Quote: Originally Posted by Davidc2


The BSODs appear random - eg once during surfing with IE9, another time while using Photoshop. BSODs not regular or often - maybe once a fortnight - but seemingly completely unpredictable.

MemTest run (just for an hour) didn't show up any problems.

I'd be grateful for a steer on what can be causing the BSODs.

Thanks


Easy, your Symantec is causing memory corruption. Remove and replace with Microsoft Security Essentials
ftp://ftp.symantec.com/public/englis...moval_Tool.exe
Virus, Spyware & Malware Protection | Microsoft Security Essentials

http://www.sevenforums.com/bsod-help-support/192323-intermittent-bsod-ntoskrnl-exe-nt-7cc40.html
Relevancy 81.84%

Hi all, I have been getting BSODs since January 2012 while playing games or simply surfing the internet using Firefox or IE9.

My PC build is as follows:

AMD Phenom II X4 945
Biostar A880G+ motherboard
Kingston DDR3 PC1333 x 2 (4GB total)
Palit GTX460 768MB PCI-E
Western Digital HDD 500GB SATA
Windows 7 Home Premium 64bit (OEM DVD from retail shop)

Have just taken out 1 DRAM to isolate the problem; since there are some cases like mine that eventually suggest physical memory module problems in this forum.

Dump files and system health report html file attached.

A:Random BSOD - ntoskrnl.exe+7cc40

Hi Miki, welcome to SevenForums!

Four dumps, two memory management, one IRQL and one System Service Exception. There's a few things I want you to do!

First off, in your drivers list I noticed you have dtsoftbus01.sys, which is a driver for Daemon Tools, and Daemon Tools is a VERY large causer of BSODs in the W7 environment. Please fully uninstall Daemon Tools and then restart your system.

Two tests I'd like you to run:






Quote:
Memtest:

Read the following to test your memory for errors.

Driver Verifier:

Read the following to enable Driver Verifier. Use Driver Second if Memtest finds nothing, as it's likely a software / driver issue, we just aren't being told what it is, and hopefully Driver Verifier will than force a crash if it finds the violating driver.



Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1A, {41790, fffffa80008fa0f0, ffff, 0}

Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+36024 )

Followup: MachineOwner
---------

1: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

MEMORY_MANAGEMENT (1a)
# Any other values for parameter 1 must be individually examined.
Arguments:
Arg1: 0000000000041790, The subtype of the bugcheck.
Arg2: fffffa80008fa0f0
Arg3: 000000000000ffff
Arg4: 0000000000000000

Debugging Details:
------------------
BUGCHECK_STR: 0x1a_41790

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

PROCESS_NAME: MemeoDashboard

CURRENT_IRQL: 0

LAST_CONTROL_TRANSFER: from fffff8000310a150 to fffff8000309ac40

STACK_TEXT:
fffff880`092715f8 fffff800`0310a150 : 00000000`0000001a 00000000`00041790 fffffa80`008fa0f0 00000000`0000ffff : nt!KeBugCheckEx
fffff880`09271600 fffff800`030880ff : fffffa80`00000000 00000000`085fffff 00000000`00000000 00000000`00000000 : nt! ?? ::FNODOBFM::`string'+0x36024
fffff880`092717c0 fffff800`03099ed3 : ffffffff`ffffffff fffff880`09271a90 fffff880`09271a98 00000000`00008000 : nt!NtFreeVirtualMemory+0x61f
fffff880`092718c0 fffff800`03096470 : fffff800`033179af 00000000`00000010 00000000`00000086 fffff880`09271a88 : nt!KiSystemServiceCopyEnd+0x13
fffff880`09271a58 fffff800`033179af : 00000000`00000010 00000000`00000086 fffff880`09271a88 00000000`00000000 : nt!KiServiceLinkage
fffff880`09271a60 fffff800`03370b8d : 00000000`08500000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!RtlFreeUserStack+0x27
fffff880`09271a90 fffff800`03370eed : fffff880`00000000 00000000`0777e300 00000000`7ef12000 00000000`00000000 : nt!PspExitThread+0x5dd
fffff880`09271b90 fffff800`03370ff5 : fffffa80`06e74b60 00000000`00000000 fffffa80`06e74b60 00000000`0777ec00 : nt!PspTerminateThreadByPointer+0x4d
fffff880`09271be0 fffff800`03099ed3 : fffffa80`06e74b60 fffff880`09271ca0 00000000`7ef12000 00000000`7ef12000 : nt!NtTerminateThread+0x45
fffff880`09271c20 00000000`771f184a : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
00000000`0777e348 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x771f184a
STACK_COMMAND: kb

FOLLOWUP_IP:
nt! ?? ::FNODOBFM::`string'+36024
fffff800`0310a150 cc int 3

SYMBOL_STACK_INDEX:... Read more

http://www.sevenforums.com/bsod-help-support/216487-random-bsod-ntoskrnl-exe-7cc40.html
Relevancy 80.91%

Dear All,

i have problem with my computer. From time to time appears BSOD. I attached few minidumps, and please analyze it. I tried to open them in BlueScreenViewer and all of them are related to ntoskrnl.exe as i wrote in title.

This is my configuration:
Seagate 1 TB Barracuda 7200.12 (32MB, Serial ATA III)
Radeon 6850 XFX 1GB 2xDVI&HDMI&DP (PCI-E)
Intel Core i5 2500K 3,30 GHz BOX
Corsair CMPSU-800GEU - 800W
Microsoft Windows 7 Home Premium PL OEM 64Bit SP1
Gigabyte GA-H67MA-UD2H-B3
GoodRam DDR3 4GB 1333MHz CL9
CoolerMaster Elite 310 Black-Orange - bez zasilacza
Logitech Wireless Desktop MK320
LG SuperMulti DVD+/-RW GH22NS40 bulk black (bez oprogramowania)

Any ideas?

Thank Yoy in advance

Damian

A:BSOD, ntoskrnl.exe+7cc40, appears randomly.

Two issues

1-sptd.sys

Please remove any CD visualization programs such as Daemon Tools and Alcohol 120%.

They use a driver, found in your dmp, called sptd.sys, that is notorious for causing BSODs.

Use this SPTD uninstaller DuplexSecure - Downloads DuplexSecure - FAQ

when you're done you can use this Freeware:

MagicISO Virtual CD/DVD-ROM (MagicDisc) in its place

Using MagicISO to create ISO image files

2- 3 year old ESET smart security. This is the cause of at least the ones in march, and Feb. Update to current version. If you still are crashing remove it to test.

http://www.sevenforums.com/bsod-help-support/219993-bsod-ntoskrnl-exe-7cc40-appears-randomly.html
Relevancy 80.91%

Hello I must admit I'm completely almost always BSOD, by multiple caused ntoskrnl.exe+7cc40 lost by now and need help The problem is I have this notebookl HP multiple BSOD, almost always caused by ntoskrnl.exe+7cc40 G -b SA Notebook PC Product Specifications HP G -b SA Notebook PC - HP Customer Care United States - English HP G -b SA and I'm getting random BSODs at completely random times Usually is happens after cold start I think I've tried everything hardware-related Memtest h test is ok hdd seems ok too SMART and HDtune machina was in servise center and they replaced mainboard But BSODs are still bumping up I'm running W Home Premium retail multiple BSOD, almost always caused by ntoskrnl.exe+7cc40 version hdd was wiped clean few moths ago so there are no HP quot goodies quot left From what I was able to find it seems like some sort of driver-memory related problem but right now I have no idea what to look for Also service center says in short quot hardware ok must be something in software you are using quot

A:multiple BSOD, almost always caused by ntoskrnl.exe+7cc40

I do not see any really questionable software. K-Lite could cause problems if it was corrupted; codec packages are somewhat worrisome when they get corrupted. Other than that, nothing out of the ordinary.

I did see an out of date driver: netr28x.sys which is your Ralink RT2860 series Wireless LAN Card (you may have a different manufacturer). Download the updated driver from the HP Support site, and use the following steps to re-install the update:

First, download the latest driver. Then do the next steps.
Click Start Menu
Right Click My Computer/Computer
Click Manage
Click Device Manager from the list on the left
Find the device you are trying to uninstall by expanding the appropriate set of devices
Right click the device
Click Uninstall (do not click OK in the dialog box that pops up after hitting Uninstall)
Put a tick in Delete driver software for this device (if this option is available, otherwise just hit OK) and hit OK
Restart your computer only if Windows asks you to.
Install the latest driver for the device.

Alternatively:Login as an adminstrative user.
First, download the latest driver. Then do the next steps.
Click Start Menu
Click Control Panel
Click Hardware and Sound
Click Device Manager (the last link under Devices and Printers)
Find the device you are trying to uninstall by expanding the appropriate set of devices
Right click the device
Click Uninstall (do not click OK in the dialog box that pops up after hitting Uninstall)
Put a tick in Delete driver software for this device (if this option is available, otherwise just hit OK) and hit OK
Restart your computer only if Windows asks you to.
Install the latest driver for the device.
Also, some of your crashes are indicating hard disk related problems. It may just be hard disk corruption, or maybe your hard disk was disconnected during transit.

The first thing to check is whether the hard disk is physically connected to the motherboard properly. To do so:Shut down and turn off the computer
Remove the AC Adapter
Remove the battery
Hold down the power button for 15-30 seconds to close the circuit and drain any residual power
Remove the panel on the underside of the laptop where the hard disk is housed
Remove and re-insert the hard disk by sliding it away from the connector and then gently but firmly pressing it back into the connector (no screws should need to be removed to do this step)
Replace the panel on the underside of the laptop to cover the hard disk
Replace the battery
Replace the AC Adapter
Turn on the computer and see how it responds
Post back once these steps have been implemented whether the system is stable. Sometimes these crashes can occur due to a loose connection.
Then run Disk Check with Automatically fix file system errors checked.

http://www.sevenforums.com/bsod-help-support/236905-multiple-bsod-almost-always-caused-ntoskrnl-exe-7cc40.html
Relevancy 80.91%

I've had half a dozen crashes since December that I can easily reproduce when attempting to copy BSOD ntoskrnl.exe+7cc40 copying files, large amounts of data hundreds of GB BSOD copying files, ntoskrnl.exe+7cc40 between non-OS drives Bug check code is usually x a IRQL NOT LESS OR EQUAL but I've also seen x NTFS FILE SYSTEM and x c DRIVER CORRUPTED EXPOOL The crash happens randomly during the copy process sometimes very quickly and other times only after a half hour or more Dumps are attached and debugger analyses for the most recent crashes have been copied below I thought I had a memory leak because file copy operations always consumed all GB of physical memory installed but it turns out I did not have swap files set for my non-OS drives I setup swap files this morning which reduced physical memory use during data transfer from GB to GB but still ended up with a BSOD despite this fix I've had BSODs when using windows shell to copy or a freeware utility syncback I've also had BSODs when trying to copy over a network to a non-OS drive I'm not running any quirky security software MSE Comodo Firewall My rig is overclocked CPU-Z Validator but stable hours prime all intel burn tests memtest for hours etc See http img imageshack us img bstability png SFC scannow reports nothing Disk check has not reported errors Ideas Code Microsoft R Windows Debugger Version AMD Copyright c Microsoft Corporation All rights reserved Loading Dump File C Windows Minidump - - dmp Mini Kernel Dump File Only registers and stack trace are available Symbol search path is SRV C Symbols http msdl microsoft com download symbols Executable search path is C Windows System Windows Kernel Version Service Pack MP procs Free x Product WinNt suite TerminalServer SingleUserTS Built by amd fre win sp gdr - Machine Name Kernel base xfffff a PsLoadedModuleList xfffff f Debug session time Tue Feb UTC - System Uptime days Loading Kernel Symbols Loading User Symbols Loading unloaded module list Bugcheck Analysis Use analyze -v to get detailed debugging information BugCheck A a fffff f Probably caused by memory corruption nt MiRestoreTransitionPte Followup MachineOwner --------- kd gt analyze -v Bugcheck Analysis IRQL NOT LESS OR EQUAL a An attempt was made to access a pageable or completely invalid address at an interrupt request level IRQL that is too high This is usually caused by drivers using improper addresses If a kernel debugger is available get the stack backtrace Arguments Arg a memory referenced Arg IRQL Arg bitfield bit value read operation write operation bit value not an execute operation execute operation only on chips which support this level of status Arg fffff f address which referenced memory Debugging Details ------------------ WRITE ADDRESS GetPointerFromAddress unable to read from fffff b a CURRENT IRQL FAULTING IP nt MiRestoreTransitionPte fffff f f fba b f lock bts dword ptr rbx h Fh CUSTOMER CRASH COUNT DEFAULT BUCKET ID VISTA DRIVER FAULT BUGCHECK STR xA PROCESS NAME SyncBack exe TRAP FRAME fffff ce cf -- trap xfffff ce cf NOTE The trap frame does not contain all registers Some register values may be zeroed or incorrect rax rbx rcx fffff d e rdx rsi rdi rip fffff f rsp fffff ce d rbp r r r r r r r r iopl nv up ei pl nz na po nc nt MiRestoreTransitionPte x fffff f f fba b f lock bts dword ptr rbx h Fh ds Resetting default scope LAST CONTROL TRANSFER from fffff e to fffff c STACK TEXT fffff ce ce fffff e a a nt KeBugCheckEx fffff ce ce fffff e fffff a d bff nt KiBugCheckDispatch x fffff ce cf fffff f fffffa a ff fffffa cd a fffff a e ad fffffa a nt KiPageFault x fffff ce d fffff d ad fffff fffffa a ff fffffa a nt MiRestoreTransitionPte x fffff ce d b fffff b bc fffff ce d ffffffff ffffffff nt MiRemoveLowestPriorityStandbyPage x d fffff ce d fffff afe e fffff c fffff nt MmCopyToCachedPage xe fffff ce d fffff b f fffffa feb fffff ce d nt CcMapAndCopyInToCache x e fffff ce d fffff bf fffff ce d fffffa fc e nt CcCopyWrite x fffff ce d a fffff a fffffa fc... Read more

A:BSOD copying files, ntoskrnl.exe+7cc40

Nice post thanks

These crashes were caused by memory corruption/exception (probably a driver).
Please run these two tests to verify your memory and find which driver is causing the problem.

If you are overclocking anything reset to default before running these tests.
In other words STOP!!!
Memtest.





Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.



RAM - Test with Memtest86+

Driver verifier






Quote:
Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

So, I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Special Pool", "Force Pending I/O Requests" and "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

Reboot into Windows (after the crash) and turn off Driver Verifier by going back in and selecting "Delete existing settings" on the first page, then locate and zip up the memory dump file and upload it with your next post.

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.


Using Driver Verifier to identify issues with Windows drivers for advanced users

http://www.sevenforums.com/bsod-help-support/212996-bsod-copying-files-ntoskrnl-exe-7cc40.html
Relevancy 80.91%

BSOD at random times, seems to occur more often though, when referencing hard drive memory.
My first problem I need help with is when i try to access a .dmp file i get told something about symbols referencing the following:
ntoskrnl.exe ( nt+7cc40 )
any idea how to fix it?

A:random BSOD's and cant do .dmp ntoskrnl.exe ( nt+7cc40 ) problem

PS. sorry i am not following the exact rules regarding the whole .dmp file thing but i dont know how to do that...

http://www.sevenforums.com/bsod-help-support/208585-random-bsods-cant-do-dmp-ntoskrnl-exe-nt-7cc40-problem.html
Relevancy 80.91%

Hello! I've been recieving reoccurring BSODs from 3d gaming. BlueScreenView reports that I've been getting ntoskrnl+7cc40. The bug check string is usually DRIVER_IRQL_NOT_LESS_OR_EQUAL, IQRL_NOT_LESS_OR_EQUAL, PAGE_FAULT_IN_NON_PAGED_AREA, and KMODE_EXCEPTION_NOT_HANDLED. I have tried updating all of my drivers, sfc /scannow, and chkdsk. None seems to work. I'm running a HP Pavilion dv4-2145dx, that's about 2-3 years old.

Specs:
- Windows 7 Home Premium 64bit (OEM)
- AMD Turion(tm) II Dual-Core Mobile M520
- ATI Mobility Radeon 4200 Series
- 4gb ram

attached is my bsod dmp and system file collection
Please help! thanks in advance!

A:Constant BSOD from 3d gaming, ntoskrnl+7cc40

Possible out of date drivers:
Code:
iirsp fffff880`01558000 fffff880`01569000 Tue Dec 13 14:47:54 2005 (439f418a) 00019fb9 iirsp.sys
nfrd960 fffff880`016cf000 fffff880`016df000 Tue Jun 06 15:11:48 2006 (4485ef94) 0000ffcb nfrd960.sys
adpu320 fffff880`01200000 fffff880`0122f000 Tue Feb 27 17:04:15 2007 (45e4c6ff) 0003588d adpu320.sys
adpahci fffff880`01397000 fffff880`013ed000 Tue May 01 11:30:09 2007 (46377921) 00058e0f adpahci.sys
arc fffff880`0149d000 fffff880`014b6000 Thu May 24 15:27:55 2007 (4656035b) 00017fb4 arc.sys
SiSRaid2 fffff880`019dd000 fffff880`019eb000 Wed Sep 24 12:28:20 2008 (48da86c4) 00011d5d SiSRaid2.sys
sisraid4 fffff880`01800000 fffff880`01818000 Wed Oct 01 15:56:04 2008 (48e3f1f4) 0001ec6b sisraid4.sys
adp94xx fffff880`0131c000 fffff880`01397000 Fri Dec 05 16:54:42 2008 (4939bf42) 0007c740 adp94xx.sys
lsi_fc fffff880`01569000 fffff880`01588000 Tue Dec 09 15:46:09 2008 (493ef531) 0001dc09 lsi_fc.sys
arcsas fffff880`014b6000 fffff880`014d1000 Wed Jan 14 12:27:37 2009 (496e3ca9) 0001f176 arcsas.sys
ql2300 fffff880`01839000 fffff880`019dd000 Thu Jan 22 16:05:06 2009 (4978fba2) 0017acdb ql2300.sys
vsmraid fffff880`01769000 fffff880`01793000 Fri Jan 30 18:18:57 2009 (4983a701) 00028def vsmraid.sys
elxstor fffff880`014d1000 fffff880`01558000 Tue Feb 03 15:52:11 2009 (4988ca9b) 0008214f elxstor.sys
stexstor fffff880`01818000 fffff880`01822000 Tue Feb 17 16:03:36 2009 (499b4248) 0000b026 stexstor.sys
hamachi fffff880`047f5000 fffff880`04800000 Thu Feb 19 03:36:41 2009 (499d3639) 0000a5d7 hamachi.sys
amdsbs fffff880`0144b000 fffff880`01492000 Fri Mar 20 12:36:03 2009 (49c3e213) 0003938a amdsbs.sys
lsi_scsi fffff880`0159b000 fffff880`015ba000 Thu Apr 16 16:13:50 2009 (49e7ad9e) 0002a7b5 lsi_scsi.sys
HpqKbFiltr fffff880`04a7f000 fffff880`04a8b000 Wed Apr 29 07:48:30 2009 (49f85aae) 00006ec8 HpqKbFiltr.sys
AtiPcie fffff880`02050000 fffff880`02058000 Tue May 05 09:00:22 2009 (4a005486) 000134c7 AtiPcie.sys
Apfiltr fffff880`04400000 fffff880`0443f000 Tue May 12 03:38:59 2009 (4a0943b3) 0003ca71 Apfiltr.sys
GEARAspiWDM fffff880`04a46000 fffff880`04a53000 Mon May 18 06:17:04 2009 (4a1151c0) 000159b4 GEARAspiWDM.sys
lsi_sas fffff880`01033000 fffff880`01050000 Mon May 18 18:20:23 2009 (4a11fb47) 000230a6 lsi_sas.sys
lsi_sas2 fffff880`01588000 fffff880`0159b000 Mon May 18 18:31:48 2009 (4a11fdf4) 0002002e lsi_sas2.sys
megasas fffff880`015ba000 fffff880`015c6000 Mon May 18 19:09:46 2009 (4a1206da) 000169a1 megasas.sys
ql40xx fffff880`0170a000 fffff880`01769000 Mon May 18 19:18:11 2009 (4a1208d3) 00029201 ql40xx.sys
MegaSR fffff880`0162b000 fffff880`016cf000 Mon May 18 19:25:54 2009 (4a120aa2) 00052e51 MegaSR.sys
Rt64win7 fffff880`04a0d000 fffff880`04a46000 Fri May 22 08:52:30 2009 (4a16bc2e) 00041606 Rt64win7.sys
enecir fffff880`045d9000 fffff880`045f6000 Sun Jun 28 20:17:30 2009 (4a48243a) 00019675 enecir.sys
iirsp.sys
nfrd960.sys
adpu320.sys
adpahci.sys
arc.sys
SiSRaid2.sys
sisraid4.sys
adp94xx.sys
lsi_fc.sys
arcsas.sys
ql2300.sys
vsmraid.sys
elxstor.sys
stexstor.sys
hamachi.sys
amdsbs.sys
lsi_scsi.sys
HpqKbFiltr.sys
AtiPcie.sys
Apfiltr.sys
GEARAspiWDM.sys
lsi_sas.sys
lsi_sas2.sys
megasas.sys
ql40xx.sys
MegaSR.sys
Rt64win7.sys
enecir.sys



Code:

Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [D:\Kingston\BSODDmpFiles\Vimicry\Windows7_Vista_jcgriff2\030712-31340-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Machine Name:
Kernel base = 0xfffff800`03257000 PsLoadedModuleList = 0xfffff800`0349c670
Debug session t... Read more

http://www.sevenforums.com/bsod-help-support/218102-constant-bsod-3d-gaming-ntoskrnl-7cc40.html
Relevancy 80.91%

HI my name is banby and i'm using this computer:

manufacturer: Dell
model :inspiron 570
processor : AMD ATHLON(TM) IIx2 250 processor 3.00 GHz
installed memory(RAM):4.00 GB (3.75 GB usable)
also, i'm using a windows 7 home premium sp1 64 bit.
well, since 2 months my computer is shutting down unexpectly and a blue screen appear.sometimes it happens 3 to 4 times a day. After researches in minidump repports,i found a that it was due to

*msahci.sys
*ntoskrnl.exe ...
now,i'm confused i don't know what to do to fix this issue
i also collected reports with sf diagnostic tool that i submitted with this post
thank you to help me

A:frequent BSOD on my computer due to ntoskrnl.exe+7cc40

Welcome aboard, banby.

► A lot of problem creators are there
Catalyst Control Center
Norton AntiVirus ; replace by Microsoft Security Essentials - Free Antivirus for Windows
PC Tools Registry Mechanic
Roxio Creator Starter
WinUtilities
Wise Care 365
► Some Dell Junks are also present there. Remove them up too.

Clean Up Factory Bloatware
► Free up the startup.

Click on the Start button
Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the “Startup” tab.
Deselect all items other than the antivirus.
Apply > OK
Accept the restart.
► Finally, Your crash dumps are not showing any finite probable cause. In such a situation, it is better to enable Driver Verifier to monitor the drivers.

Driver Verifier - Enable and Disable

Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

Let us know the results, with the subsequent crash dumps, if any.

http://www.sevenforums.com/bsod-help-support/255609-frequent-bsod-my-computer-due-ntoskrnl-exe-7cc40.html
Relevancy 80.91%

Three months ago I had an issue with BSODs but they went away I'm a gamer and had no BSODS while playing many games Recently I've been playing the Hunter Red Orchestra F and the Battlefield beta I played for many hours without any issues then ntoskrnl.exe+7cc40 Sudden 0x00000124, BSOD, all of a sudden on the nd of this month had a BSOD while playing Battlefield Keep in mind I had played around hours of Battlefield over the previous days without a hitch so it's not like I was casually playing games And before that I played Red Orchestra for many hours no problems I played a few hours after my computer had restarted without issues The next day on the rd I played in the morning and sure enough minutes into playing I got another BSOD Sudden BSOD, 0x00000124, ntoskrnl.exe+7cc40 then another later in the day playing the Hunter a hunting game Each of these three BSODS gave the same error message Technical Information STOP x x xfffffa d c x b x ntoskrnl exe - Address xfffff c base at xfffff DateStamp x e aaa I have no idea what would have caused this I haven't installed anything new recently hardware or software wise besides those games I had installed new nvidia video drivers for my video card on the th thinking it was that I uninstalled them and installed the prior drivers that gave me no issues in the past The last BSOD occurred while using the older drivers so I don't think it's that I've been stable for over months without issues I'm going to try downclocking my cpu ram to see if that helps but I was stable before that Any idea what the cause is I attached my minidump files to this posting Thanks for trying to help

A:Sudden BSOD, 0x00000124, ntoskrnl.exe+7cc40

Hello Efstratios

* Please remove any CD visualization programs such as Daemon Tools and Alcohol 120%.

They use a driver, found in your dmp, called sptd.sys, that is notorious for causing BSODs.

Use this SPTD uninstaller DuplexSecure - Downloads DuplexSecure - FAQ

When you're done you can use this Freeware MagicISO Virtual CD/DVD-ROM(MagicDisc) in its place.
* Your Norton/Symantec. This is a known cause of BSOD's.
Remove and replace with Microsoft Security Essentials.

http://us.norton.com/support/kb/web_...080710133834EN

Virus, Spyware & Malware Protection | Microsoft Security Essentials

* Old drivers

Code:
ctgame.sys 4/7/2004 11:42:49 AM fffff880`054eb000 33f9f7f6`054efc80 0x33f9ff7600004c80 0x40734e89
RTCore64.sys 5/25/2005 5:39:12 PM fffff880`089f4000 fffff880`089fa000 0x00006000 0x42941d90
secdrv.SYS 9/14/2006 12:18:38 AM fffff880`08115000 fffff880`08120000 0x0000b000 0x4508052e
COMMONFX.DLL 4/10/2007 12:08:38 AM fffff880`0674c000 fffff880`06777000 0x0002b000 0x461a3ad6
CTAUDFX.DLL 4/10/2007 12:08:39 AM fffff880`06f51000 fffff080`07000000 0xfffff800000af000 0x461a3ad7
CTSBLFX.DLL 4/10/2007 12:08:42 AM fffff880`06ea6000 fffff880`06f51000 0x000ab000 0x461a3ada
Rtnic64.sys 3/31/2008 4:39:38 PM fffff880`05263000 fffff300`05277000 0xfffffa8000014000 0x47f0791a
000.fcl 9/27/2008 12:11:22 AM fffff880`08163000 fffff880`0818e000 0x0002b000 0x48dcdf7a
adfs.SYS 11/4/2008 3:48:14 AM fffff880`07c00000 fffff300`07c18000 0xfffffa8000018000 0x490f2b4e
gdrv.sys 3/13/2009 2:22:29 PM fffff880`089de000 fffff880`089e7000 0x00009000 0x49b9d175
ALSysIO64.sys 4/20/2009 6:41:04 AM fffff880`08df8000 fffff300`08e00000 0xfffffa8000008000 0x49eb7e50
spldr.sys 5/12/2009 3:56:27 AM fffff880`02141000 fffff880`02149000 0x00008000 0x4a0858bb
lirsgt.sys 5/18/2009 12:06:57 AM fffff880`08062000 fffff880`0806f000 0x0000d000 0x4a100bf1
atksgt.sys 5/18/2009 12:36:34 AM fffff880`0800a000 fffff880`08059000 0x0004f000 0x4a1012e2
GEARAspiWDM.sys 5/18/2009 11:17:04 PM fffff880`05256000 fffff300`05263000 0xfffffa800000d000 0x4a1151c0
LHidFilt.Sys 6/18/2009 3:49:39 AM fffff880`075b7000 fffff880`075ca000 0x00013000 0x4a391ea3
LMouFilt.Sys 6/18/2009 3:49:43 AM fffff880`075d7000 fffff880`075eb000 0x00014000 0x4a391ea7
LUsbFilt.Sys 6/18/2009 3:49:46 AM fffff880`07577000 01fff880`07587000 0x0200000000010000 0x4a391eaa
How To Find Drivers:




Quote:
- search Google for the name of the driver
- compare the Google results with what's installed on your system to figure out which device/program it belongs to
- visit the web site of the manufacturer of the hardware/program to get the latest drivers (DON'T use Windows Update or the Update driver function of Device Manager).
- if there are difficulties in locating them, post back with questions and someone will try and help you locate the appropriate program.


- - The most common drivers are listed on this page: Driver Reference Driver Reference
- - Driver manufacturer links are on this page: Drivers and Downloads

http://www.sevenforums.com/bsod-help-support/189971-sudden-bsod-0x00000124-ntoskrnl-exe-7cc40.html
Relevancy 80.91%

Hello,

This is my 1st time installing Windows 7 Ultimate 64bit on my new rig. While i was using my pc normally, not gaming, it just crashed and went into blue screen. Twice.
First error was MEMORY_MANAGEMENT and the second error was IRQL_NOT_LESS_OR_EQUAL.
And so, i tried using BlueScreenView to open the .dmp files and both of the .dmp files are caused by ntoskrnl.exe.

My rig's spec:
Windows 7 Ultimate 64bit SP1
Intel Core i5 2500
Asus P8P67 LE
Mushkin 4GB DDR3 x 2
500GB WD HDD
Nvidia 9800GT

I've attached the .dmp files. Any help on this issue would be much appreciated. Thanks!

A:Random BSOD caused by ntoskrnl.exe+7cc40

  
Quote: Originally Posted by getxposed


Hello,

This is my 1st time installing Windows 7 Ultimate 64bit on my new rig. While i was using my pc normally, not gaming, it just crashed and went into blue screen. Twice.
First error was MEMORY_MANAGEMENT and the second error was IRQL_NOT_LESS_OR_EQUAL.
And so, i tried using BlueScreenView to open the .dmp files and both of the .dmp files are caused by ntoskrnl.exe.

My rig's spec:
Windows 7 Ultimate 64bit SP1
Intel Core i5 2500
Asus P8P67 LE
Mushkin 4GB DDR3 x 2
500GB WD HDD
Nvidia 9800GT

I've attached the .dmp files. Any help on this issue would be much appreciated. Thanks!


Easy your Kaspersky. Remove and replace with Microsoft Security Essentials

http://support.kaspersky.com/downloa...vremover10.zip

Microsoft Security Essentials - Free Antivirus for Windows

http://www.sevenforums.com/bsod-help-support/194614-random-bsod-caused-ntoskrnl-exe-7cc40.html
Relevancy 80.91%

hi

can someone please help i keep getting blue error screens different types of errors but all having the same crash address been using bluescreen viewer to see the errors

iv tried as much as i can by updating drivers and checking if windows is up to date

looked on other forums but just want a simple answer to what the problem actually is

iv uploaded the health report and the crash files

thank u

A:BSOD all from same crash address ntoskrnl.exe+7cc40.. please help!!

20 memory dumps over the past 3 days - Wow!

If you are using a USB mouse, it's safe to ignore the error in perfmon /report about a PS2 mouse

Only 63 memory dumps after SP1 - most systems have more than 70. Please check Windows Update for all available updates.

Windows 7 does not like wireless USB devices such as the NETGEAR WNDA3100v2 device installed on your system. Here's my rant about them:





Quote:
I do not recommend using wireless USB devices. Especially in Win7 systems.
These wireless USB devices have many issues with Win7 - and using Vista drivers with them is almost sure to cause a BSOD.
Should you want to keep using these devices, be sure to have Win7 drivers - DO NOT use Vista drivers!!!
An installable wireless PCI/PCIe card that's plugged into your motherboard is much more robust, reliable, and powerful.


More to follow when the memory dumps are finished running (and I have to feed my dogs now!).....

http://www.sevenforums.com/bsod-help-support/212524-bsod-all-same-crash-address-ntoskrnl-exe-7cc40-please-help.html
Relevancy 111.37%

Hi there, I have been having a long term issue with BSOD. I initially fixed my first string of BSODs due to my ram sticks being in the wrongs slots. That fixed it for about 3 months. But I just recently bought a new video card. GeForce GTX560ti. My older card being ati radeon 4850. I updated my drivers the other night to a beta driver for the Battlefield 3 beta. That is when I noticed 2 BSODs in 1 day. I'm attaching my mini dump folder in hopes that maybe I can find some technical support as I am not the most knowledgeable on computers. Any help will be grateful.
 

A:BSOD - 2 different Address : ntoskrnl.exe+7cc40 + anthrx.sys+5c8c1

Howdy,

Probably caused by : athrx.sys

Atheros network adapter driver

Try seeing if there are any updates for it.
 

https://forums.techguy.org/threads/bsod-2-different-address-ntoskrnl-exe-7cc40-anthrx-sys-5c8c1.1021685/
Relevancy 111.37%

Hi there,

I recently received my new rig (Alienware M14X), and have had persistent problems with it.

The main issue is that I get a BSOD every time I plug out the USB 2.0 cable running from my laptop to my Dell monitor, or sometimes when shutting the machine down.

I've tracked the error back to an issue with ntoskrnl.exe (+7cc40), but I also know this is quite a general issue.

I have tried multiple solutions (driver updating, etc), and System Restore seemed to solve this for a while, but it's happening again.

I've attached my .dmp files, and would love if someone could help on this.

Ivan

A:BSOD when removing USB 2.0 cable or shutting down, ntoskrnl.exe+7cc40

It's a hardware problem concerning the drivers for a camera connected to the computer made by Creative maybe a webcam or something of that nature. If you have a webcam please update the drivers or software for it from here: Creative Worldwide Support

Please fill in the rest of your system specs using the tool attached to this thread it will help us get better help for you.


Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [D:\Downloads\ivan\092111-27549-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*F:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Machine Name:
Kernel base = 0xfffff800`0301a000 PsLoadedModuleList = 0xfffff800`0325f670
Debug session time: Tue Sep 20 19:59:40.350 2011 (UTC - 6:00)
System Uptime: 0 days 4:05:52.224
Loading Kernel Symbols
...............................................................
................................................................
.......................................................
Loading User Symbols
Loading unloaded module list
...............
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {0, 2, 0, fffff8000309ad75}

Unable to load image \SystemRoot\system32\DRIVERS\CtClsFlt.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for CtClsFlt.sys
*** ERROR: Module load completed but symbols could not be loaded for CtClsFlt.sys
Probably caused by : CtClsFlt.sys ( CtClsFlt+156b )

Followup: MachineOwner
---------

6: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: 0000000000000000, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff8000309ad75, address which referenced memory

Debugging Details:
------------------
READ_ADDRESS: GetPointerFromAddress: unable to read from fffff800032c9100
0000000000000000

CURRENT_IRQL: 2

FAULTING_IP:
nt!KeSetEvent+1e3
fffff800`0309ad75 488b00 mov rax,qword ptr [rax]

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

BUGCHECK_STR: 0xA

PROCESS_NAME: System

TRAP_FRAME: fffff880037704a0 -- (.trap 0xfffff880037704a0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000000 rbx=0000000000000000 rcx=fffffa800c263a98
rdx=0000000000000001 rsi=0000000000000000 rdi=0000000000000000
rip=fffff8000309ad75 rsp=fffff88003770630 rbp=0000000000000000
r8=0000000000000000 r9=00000000000000a0 r10=00000... Read more

http://www.sevenforums.com/bsod-help-support/187959-bsod-when-removing-usb-2-0-cable-shutting-down-ntoskrnl-exe-7cc40.html
Relevancy 111.37%

Periodic BSOD about 2 times / day starting about 3 weeks ago.

Updated some out of date drivers last night but More BSOD today (although they look to be differnt errors)

Dump attached

A:BSOD when not in use (win7sp1_gdr.110622-1506) x64 ntoskrnl.exe+7cc40

mmb - used to get exactly what you are describing for weeks and weeks. If you have not made any other radical changes to the system, first try reseating all memory first then if you have more than 1 module, take one out and run with the other(s) until you find the culprit, turned out that one of my modules was bad - I just changed both and now no more BSODs. Used to drive me crazy !! Worth a try.

http://www.sevenforums.com/bsod-help-support/193104-bsod-when-not-use-win7sp1_gdr-110622-1506-x64-ntoskrnl-exe-7cc40.html
Relevancy 111.37%

Hi I recently built a new rig for my friend using all brand new components and used ESD precautions throughout After a couple of days he called to say getting Blue Screens of Death He lives a little way away from me so I remoted in and installed Nirsoft Blue Screen View I have both attached and copied and pasted details from the crashes If I need the Mini Solved: Almost Crash : - Address Always BSOD ntoskrnl.exe+7cc40 Dump files I can get those I ran Memtest for half hour and no errors were detected - any ideas ------------ Dump File - - Solved: BSOD - Almost Always Crash Address : ntoskrnl.exe+7cc40 dmp Crash Time Bug Check String SYSTEM SERVICE EXCEPTION Bug Check Code x b Parameter c Parameter fffff c b Parameter fffff cc fd Parameter Caused By Driver ntoskrnl exe Solved: BSOD - Almost Always Crash Address : ntoskrnl.exe+7cc40 Caused By Address ntoskrnl exe cc File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win sp gdr - Processor x Crash Address ntoskrnl exe cc Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time Bug Check String NTFS FILE SYSTEM Bug Check Code x Parameter c a Parameter Parameter Parameter Caused By Driver Ntfs sys Caused By Address Ntfs sys d File Description Product Name Company File Version Processor x Crash Address ntoskrnl exe cc Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time Bug Check String NTFS FILE SYSTEM Bug Check Code x Parameter fb Parameter fffff a Parameter fffff e Parameter fffff f Caused By Driver Ntfs sys Caused By Address Ntfs sys a File Description Product Name Company File Version Processor x Crash Address ntoskrnl exe cc Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time Bug Check String BAD POOL HEADER Bug Check Code x Parameter Parameter fffff c d Parameter b Parameter b Caused By Driver win k sys Caused By Address win k sys c File Description Product Name Company File Version Processor x Crash Address ntoskrnl exe cc Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time Bug Check String SYSTEM SERVICE EXCEPTION Bug Check Code x b Parameter c Parameter fffff d a Parameter fffff ad d c Parameter Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe cc File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win sp gdr - Processor x Crash Address ntoskrnl exe cc Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time Bug Check String MEMORY MANAGEMENT Bug Check Code x a Parameter Parameter fffffa fc d Parameter ffff Parameter Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe cc File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win sp gdr - Processor x Crash Address ntoskrnl exe cc Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time Bug Check String SYSTEM SERVICE EXCEPTION Bug Check Code x b Parameter c Parameter fffff Parameter fffff e Parameter Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe cc File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win sp gdr - Processor x Crash Address nto... Read more

A:Solved: BSOD - Almost Always Crash Address : ntoskrnl.exe+7cc40

https://forums.techguy.org/threads/solved-bsod-almost-always-crash-address-ntoskrnl-exe-7cc40.1020658/
Relevancy 110.08%

Hello,

I constantly have BSOD's... when i watch the movie (avi, mkv) in any player (GOM, MPC-HC, Splash Pro...) and when i browsing internet (Firefox, Opera, Chrome, IE9).

I reinstalled Windows twice, even buy PCI network adapter, still same problem...
Already ran Memtest (6 passes 0 errors) and few of this dump files are when i ran Driver Verifier.

And yes, this problem started when i installed Service Pack 1, i don't know is that relevant..

My specs:
Asrock A770DE+
4 GB DDR2 Kingmax
MSI GTX460 Hawk
AMD Phenom ll X4 B50
Windows 7 Ultimate x64 SP1
Microsoft Security Essentials

Everything is in attachment.
Any help on this issue would be much appreciated.

Thank you in advance!

A:Random BSOD's, error 0x0000001e, 0a, caused by ntoskrnl.exe+7cc40

  
Quote: Originally Posted by zvone07


Hello,

I constantly have BSOD's... when i watch the movie (avi, mkv) in any player (GOM, MPC-HC, Splash Pro...) and when i browsing internet (Firefox, Opera, Chrome, IE9).

I reinstalled Windows twice, even buy PCI network adapter, still same problem...
Already ran Memtest (6 passes 0 errors) and few of this dump files are when i ran Driver Verifier.

And yes, this problem started when i installed Service Pack 1, i don't know is that relevant..

My specs:
Asrock A770DE+
4 GB DDR2 Kingmax
MSI GTX460 Hawk
AMD Phenom ll X4 B50
Windows 7 Ultimate x64 SP1
Microsoft Security Essentials

Everything is in attachment.
Any help on this issue would be much appreciated.

Thank you in advance!


8 different causes most pointing to hardware. If you are overclocking stop.

Please run these two tests to verify your memory and find which driver is causing the problem.
1-Memtest.

*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

RAM - Test with Memtest86+

2-Driver verifier






Quote:
I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.


Driver Verifier - Enable and Disable

http://www.sevenforums.com/bsod-help-support/194859-random-bsods-error-0x0000001e-0a-caused-ntoskrnl-exe-7cc40.html
Relevancy 110.08%

Hello my laptop is a HP dv originally with vista x OEM upgraded to seven pro x RETAIL with accademy program Upgrade done a year ago NEVER a problem never a BSOD Basically never problem with my laptot My (?) PC after caused random start by specially BSOD ntoskrnl.exe+7cc40 hardware is old but i never have problems with it I replaced only power charger and battery I'm random BSOD caused by ntoskrnl.exe+7cc40 (?) specially after start PC unable to run System Health Report with perfmon random BSOD caused by ntoskrnl.exe+7cc40 (?) specially after start PC report because i receive a timeout error doing it but i see that on C PerfLogs System Diagnostics i've all reports that i tried to do I'll attach it and also minidump folder Using Blue screen view i saw that BSOD SYSTEM SERVICE EXCEPTION are always caused by ntoskrnl exe File di Dump - - dmp Data e Ora del Crash Bug Check String SYSTEM SERVICE EXCEPTION Bug Check Code x b Parametro c Parametro fffff Parametro fffff c ea Parametro Causato Da Driver ntoskrnl exe Causato Da Indirizzo ntoskrnl exe cc Descrizione del File NT Kernel amp System Nome del Prodotto Microsoft Windows Operating System Societ Microsoft Corporation Versione del File win sp gdr - Processore x Crash Address ntoskrnl exe cc Stack Address Stack Address Stack Address Nome Computer Percorso completo C Windows Minidump - - dmp Processori Versione maggiore Versione minore Dimensioni file Dump I need help Thanks you

A:random BSOD caused by ntoskrnl.exe+7cc40 (?) specially after start PC

> Your crash was related to oodivd.sys DiskImage Virtual Disk Driver (Win32) from O&O Software GmbH dated 2/2009
Suggest you remove it to test.
NB, if critical update to newest
> Please remove any CD visualization programs such as Daemon Tools and Alcohol 120%.

They use a driver, found in your dmp, called sptd.sys, that is notorious for causing BSODs.

Use this SPTD uninstaller DuplexSecure - Downloads DuplexSecure - FAQ

On completion you can use this Freeware:

MagicISO Virtual CD/DVD-ROM (MagicDisc) in its place

Using MagicISO to create ISO image files

http://www.sevenforums.com/bsod-help-support/212682-random-bsod-caused-ntoskrnl-exe-7cc40-specially-after-start-pc.html
Relevancy 110.08%

I keep getting a random BSOD, I get it a lot in Lightroom 3 but have gotten the same error doing nothing.

*** STOP: 0x00000124 (0x0000000000000000, 0xfffffa80053d5028, 0x00000000b2000040,
0x0000000000000800)
*** hal.dll - Address 0xfffff80002c15a3b base at 0xfffff80002c03000 DateStamp
0x4ce7c669

Minidump is attached

A:BSOD random error 0x00000124, hal.dll at address ntoskrnl.exe+7cc40

Windows 7
4 GB ram
Intel Q9450
Gigabit MB
Raptor HD

Full data is now attached

http://www.sevenforums.com/bsod-help-support/201400-bsod-random-error-0x00000124-hal-dll-address-ntoskrnl-exe-7cc40.html
Relevancy 108.79%

I frequently get BSOD's at the same crash address (ntoskrnl.exe+7cc40) but with different bug strings:

IRQL_NOT_LESS_OR_EQUAL
SYSTEM_SERVICE_EXCEPTION
PAGE_FAULT_IN_NONPAGED_AREA
KMODE_EXCEPTION_NOT_HANDLED

I usually get it while actively using my computer. I have tried to reinstall windows but it still happens as well as updated all drivers. I have run memtest overnight with no issues as well. I have also reseated all my memory and video card as well.

OS: Windows 7 Premium x64
CPU: AMD Phenom?II X6 1100T Six-Core CPU w/ HyperTransport Technology
VIDEO: AMD Radeon HD 6950 2GB GDDR5 16X PCIe Video Card [+152] (Major Brand Powered by AMD)

Thank you so much for your help! I am grateful that there are experts that are willing to help out with computer issues.

Thanks,

Lam

A:BSOD while watching streams or playing video games, ntoskrnl.exe+7cc40

New crashes are attached. Does anybody have any fixes?

Thanks a ton!

http://www.sevenforums.com/bsod-help-support/202104-bsod-while-watching-streams-playing-video-games-ntoskrnl-exe-7cc40.html
Relevancy 99.76%

hello forum i just wanted to share the findings regarding my BSOD error symptoms to get assistance with troubleshooting you should follow the instructions given in http www sevenforums com crashes-d tructions html however as very basic initial steps i personally prefer this approach create a bootable CD for memtest from Memtest - Advanced Memory Diagnostic Tool and let it run for hours if there is just one single error it means your memory is definitely bad if there are no errors your memory is quot most likely quot OK get a copy of BlueScreenView from NirSoft - freeware utilities password recovery system utilities desktop utilities to easily read the crash dumps on my system i was getting sporadic BSOD crashes - each time random stop codes including DRIVER IRQL NOT LESS OR EQUAL IRQL NOT LESS OR EQUAL KMODE EXCEPTION NOT HANDLED MEMORY MANAGEMENT PAGE FAULT IN NONPAGED AREA PFN [SOLVED] BSOD "ntoskrnl.exe+7cc40" random around LIST CORRUPT POOL CORRUPTION IN FILE AREA SYSTEM SERVICE EXCEPTION SYSTEM THREAD EXCEPTION NOT HANDLED i wasn't able to make out any pattern the only thing in common was the crash address that would always be quot ntoskrnl exe cc quot in many cases the crash dumps will indicate a particular driv r to be causing the trouble but with my system this was not the case by coincidence i had identified a pattern how to reproduce a BSOD by doing certain actions in a pre-defined sequence so this would allow me to proceed with systematic troubleshooting in the end it turned out [SOLVED] random BSOD around "ntoskrnl.exe+7cc40" i was using some defective RAM - or quot strange quot RAM at least it took me quite a while because [SOLVED] random BSOD around "ntoskrnl.exe+7cc40" of the following reasons BSOD seemed to occur randomly sporadically BSOD was showing random stop codes memtest did not show any erros conclusion i would recommend the following approach use memtest to check if there are any quot obvious quot errors with your RAM use BlueScreenView to check if any device driv r seems to be causing the error in case you're getting quot random quot errors like me as outlined above take one more closer look at your RAM in case this still doesn't get you any further follow the posting [SOLVED] random BSOD around "ntoskrnl.exe+7cc40" instructions to attach the required files the guys on this forum are doing a great job and will most likely be able to point you in the right direction for additional troubleshooting cheers francoiste

A:[SOLVED] random BSOD around "ntoskrnl.exe+7cc40"

my memory was showing these strange symptoms due to physical damage.
please see the <attached picture>.

if you look at the photograph it appears just so obvious.
but believe me, you won't detect it with your bare eyes.
you need either a magnifying glass or (as in my case) a high-end photographic camera with super zoom.

note: i'm not sure if this damage was there right from the beginning (DOA) or caused by my excessive testing (adding, removing, swapping the memory modules endless times).

anyhow,
so what's the message?

first: be very careful when inserting your memory modules into the slots.
some brands / modules don't have a very robust design, obviously.

second: the scary part is that neither memtest nor windows detected any errors when doing a memory validation.
the only visible symptoms: the physical damage led to sporadic errors (blue screens) during regular operation.
so it's still very difficult to tell whether a memory module is 100% OK or just 99% OK ...
cheers, francoiste

http://www.sevenforums.com/bsod-help-support/190800-solved-random-bsod-around-ntoskrnl-exe-7cc40.html
Relevancy 98.9%

Hey guys, just awhile ago I got the random BSOD PFN_LIST_CORRUPT caused by a ntoskrnl.exe+7cc40
I think it's a RAM issue, but I'm not sure

I'm pretty computer illiterate, so sorry if I'm slow or anything

Edit: Didn't see sticky, really sorry. Doing as listed right now.

A:PFN_LIST_CORRUPT caused by ntoskrnl.exe+7cc40

Can't edit post twice within 15 mins so I'll just post this
Updated attachments and Info

Windows 7, x64
Original OS
OEM
Just got the laptop about a year ago
I just formatted the system after a virus I couldn't be bothered to deal with. But I guess a year as well.

Intel(R) Core(TM) i3 CPU M 380 @ 2.53GHz, 2533 Mhz, 2 Core(s), 4 Logical Processor(s)
Don't know what kind of motherboard it has or what kind of specific battery it's using.

ASUSTeK
Model:U52F
MB Ver:U53F
"U52f-BBG6" is also some other info my laptop says.

http://www.techsupportforum.com/forums/f299/pfn_list_corrupt-caused-by-ntoskrnl-exe-7cc40-631621.html
Relevancy 98.9%

HI

I have been experiencing DRIVER_POWER_STATE_FAILURE crashes lately caused by ntoskrnl.exe.

I originally thought I would reinstall W7 but that has not fixed the issue

I am using OEM W7 Professional x64

The CPU is a i7 2600
The PC is only no more than 2 yrs old.
I d have an old Canon scanner LiDE 100 that I expect is causing the problem. The PC was working fine for over a year until NOv 2011 and then started crashing. I reinstallled W7 all seamed to be fine util I loaded the software for the scanner. I have loaded the latest software from the canon site.

I hope some one can some one help me?
If it is the driver for the scanner, why now?
Cheers
Craig

A:Help with DRIVER_POWER_STATE_FAILURE, caused by ntoskrnl.exe+7cc40

I'm running a Dec, a Jan, and a Feb 2012 memory dump.

Atheros AR3011 Bluetooth (no firmware) device isn't installed. Please download and install the drivers from the PC Manufacturer's website.

The BSOD's blame the disks connected to your Marvell controller. This means that it's either the disk or the controller. To test the controller, switch the disks to another controller (most Asus boards have 2) and see if that helps. Don't forget to update the controller drivers. If any of the drives fail, backup your data IMMEDIATELY! There's no telling when the drive will fail.

To test the disk, start with these free diagnostics: HD Diagnostic
Test ALL hard drives!

Further info on BSOD error messages available at: http://www.carrona.org/bsodindx.html

The following info is just FYI, I've already addressed the issues that I saw in the above paragraphs:
3RD PARTY DRIVERS PRESENT IN THE DUMP FILES
- Create a System Restore Point prior to doing any of this. DO NOT mess with the drivers themselves - leave the Windows\System32\drivers directory alone unless we specifically direct you to it!
- Please either update the older drivers from the device manufacturer's website - or uninstall them from your system. Reference links are included below.
- DO NOT use Windows Update or the Update Drivers function of Device Manager.
- Please feel free to post back about any drivers that you are having difficulty locating.
- Windows Update exceptions may be noted below for Windows drivers.

Code:

nvhda64v.sys Thu Nov 11 18:10:36 2010 (4CDC77EC)
iaStor.sys Sat Nov 06 03:44:52 2010 (4CD50774)
nusb3hub.sys Thu Sep 30 00:00:03 2010 (4CA40B43)
mv91xx.sys Fri Aug 27 05:49:22 2010 (4C778A22)
mvxxmm.sys Fri Aug 27 05:49:03 2010 (4C778A0F)
amdxata.sys Fri Mar 19 12:18:18 2010 (4BA3A3CA)
aswTdi.SYS Mon Nov 28 12:52:18 2011 (4ED3CA52)
aswSnx.SYS Mon Nov 28 12:54:05 2011 (4ED3CABD)
dump_mvxxmm.sys Fri Aug 27 05:49:03 2010 (4C778A0F)
aswRdr.SYS Mon Nov 28 12:52:20 2011 (4ED3CA54)
ElbyCDIO.sys Thu Dec 16 17:58:13 2010 (4D0A9985)
aswSP.SYS Mon Nov 28 12:53:57 2011 (4ED3CAB5)
GEARAspiWDM.sys Mon May 18 08:17:04 2009 (4A1151C0)
HECIx64.sys Tue Oct 19 19:33:43 2010 (4CBE2AD7)
aswMonFlt.sys Mon Nov 28 12:52:10 2011 (4ED3CA4A)
aswFsBlk.SYS Mon Nov 28 12:51:52 2011 (4ED3CA38)
RTKVHD64.sys Tue Nov 02 07:25:59 2010 (4CCFF547)
dump_mv91xx.sys Fri Aug 27 05:49:22 2010 (4C778A22)
Rt64win7.sys Mon Oct 25 05:33:07 2010 (4CC54ED3)
nvlddmkm.sys Sat May 21 00:07:04 2011 (4DD73A68)
nvBridge.kmd Fri May 20 23:58:23 2011 (4DD7385F)
nusb3xhc.sys Thu Sep 30 00:00:03 2010 (4CA40B43)
AnyDVD.sys Sun Dec 04 16:23:55 2011 (4EDBE4EB)
nvlddmkm.sys Wed Feb 23 22:01:34 2011 (4D65CA0E)
nvBridge.kmd Wed Feb 23 21:57:02 2011 (4D65C8FE)

http://www.carrona.org/drivers/driver.php?id=nvhda64v.sys
http://www.carrona.org/drivers/driver.php?id=iaStor.sys
http://www.carrona.org/drivers/driver.php?id=nusb3hub.sys
http://www.carrona.org/drivers/driver.php?id=mv91xx.sys
http://www.carrona.org/drivers/driver.php?id=mvxxmm.sys
http://www.carrona.org/drivers/driver.php?id=amdxata.sys
http://www.carrona.org/drivers/driver.php?id=aswTdi.SYS
http://www.carrona.org/drivers/driver.php?id=aswSnx.SYS
http://www.carrona.org/drivers/driver.php?id=dump_mvxxmm.sys
http://www.carrona.org/drivers/driver.php?id=aswRdr.SYS
http://www.carrona.org/drivers/driver.php?id=ElbyCDIO.sys
http://www.carrona.org/drivers/driver.php?id=aswSP.SYS
http://www.carrona.org/drivers/driver.php?id=GEARAspiWDM.sys
http://www.carrona.org/drivers/driver.php?id=HECIx64.sys
http://www.carrona.org/drivers/driver.php?id=aswMonFlt.sys
http://www.carrona.org/drivers/driver.php?id=aswFsBlk.SYS
http://www.carrona.org/drivers/driver.php?id=RTKVHD64.sys
http://www.carrona.org/drivers/driver.php?id=dump_mv91xx.sys
http://www.carrona.org/drivers/driver.php?id=Rt64win7.sys
http://www.carrona.org/drivers/driver.php?id=nvlddmkm... Read more

http://www.sevenforums.com/bsod-help-support/215012-help-driver_power_state_failure-caused-ntoskrnl-exe-7cc40.html
Relevancy 98.04%

Very frequents BSODs mostly drivers various 50, BSODs BCCode always ntoskrnl.exe+7cc40 but with BCCode but also BCCode in about a to ratio various quot caused by quot addresses but quot crash address quot always ntoskrnl exe cc as viewed with BlueScreenView FIRST thing I want to know given that of maybe BSODs all have the same quot crash address quot is my presumption that this provides no information relevant and revelatory in my situation correct Perhaps all BSODs with BCCode and b terminate with the same quot crash address quot SECOND thing I want to know is which column in the BlueScreenView may contain information that I can begin to do something about I searched on some keywords in this forum and hit upon several similar posts but enough different that BSODs with BCCode 50, various drivers but always ntoskrnl.exe+7cc40 I believe I could benefit from replies unique to those two questions above BTW because I read somewhere that RAM could be involved in cases of BCCode I have run the extended RAM pre-boot assessment a couple of times and PC Check of memory with lots of walking this-and-that and ran the whole suite of checks with all quot passed quot

A:BSODs with BCCode 50, various drivers but always ntoskrnl.exe+7cc40

Please upload a report

http://www.sevenforums.com/crashes-d...tructions.html

http://www.sevenforums.com/bsod-help-support/217171-bsods-bccode-50-various-drivers-but-always-ntoskrnl-exe-7cc40.html
Relevancy 96.75%

A few days ago I started having problems with my ASUS G J laptop A BSOD usually occurs after about - minutes of running Windows x I have had BSODs since it started I have no problems when it is running in safemode I have attached the pertinent info required plus a SeaTools analysis of the HDD and a photo of a completed memtest I also performed a virus scan with MSE and a full malware scan with Malwarebytes I also performed a CHKDSK r which did not fix the problem I did a cursory examination of the minidumps and noticed that all of the crash addresses come from the ntoskrnl exe file to related ntoskrnl.exe+7cc40 BSODs possibly cc file Of course I am by no means a computer expert and have no idea BSODs possibly related to ntoskrnl.exe+7cc40 file what that means so I will leave you guys the BSODs possibly related to ntoskrnl.exe+7cc40 file experts to determine the problem I have had the laptop for about a year and a half with no BSOD problems however I did reinstall Windows over the summer for some software issues This is the first kind of problem that I have had with the laptop since the reinstall Any help would be appreciated Thanks in advance OS - Vista Windows - Microsoft Windows Home Premium x -bit or x - bit What was original installed OS on system - The original OS is Microsoft Windows Home Premium x Is the OS an OEM version came pre-installed on system or full retail version YOU purchased it from retailer - This is an OEM version Age of system hardware - The system is about a year and a half old Age of OS installation - have you re-installed the OS - The OS was reinstalled during the summer around the beginning of June CPU - Intel R Core TM i CPU M GHz Intel Family Model Stepping Video Card - NVIDIA GeForce GTS M Mb MotherBoard - PEGATRON CORPORATION G JX BSN Power Supply - brand amp wattage - The input is V A W System Manufacturer - ASUS Exact model number if laptop check label on bottom - G JX Sample problem signature Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode BCP FB BCP FFFFF CB C BCP FFFFF CB BCP FFFFF B C OS Version Service Pack Product

A:BSODs possibly related to ntoskrnl.exe+7cc40 file

NOTE: I have severe eye problems. If I do not respond to your postings, please PM another staff member for assistance.

I see that SeaTools passed the Short test, but can't see if it passed the Long test. Do you know if it passed the Long test?

25 memory dumps over 3 days (13 to 15 Oct 2011)
7 different BSOD error codes
at least 5 different causes blamed
This is most likely a hardware problem - although it's possible that it's due to lower level drivers also.

Systeminfo.txt report not completed, please ensure that you have all Windows Updates:

Quote:




Installing Windows 7 Service Pack 1
1. Visit the PC manufacturer's website and update ALL drivers. DO NOT use Windows Update or the "Update drivers" function of Device Manager.
2. Check Device Manager for any unknown/disabled devices - if there are unknown/disabled devices, fix them with the latest drivers from the device manufacturer's website (not the PC Manufacturer)
3. Visit Windows Update and get all updates
4. Visit Windows Update and get Service Pack 1 (usually under Important Updates). Read these notes for installing SP1: Steps to follow before you install Windows 7 Service Pack 1 from the Microsoft Download Center
5. Visit Windows Update and get any other available updates




MSINFO32 shows a problem with SPLDR. This (at work) is usually a symptom of a virus infection. Please perform one of these independent (outside of Windows) virus scans to be sure:
Quote:




Please run one of these free, bootable antivirus disks at this link: Free Online AntiMalware Resources - Bootable Disks




Is it possible that this is left over damage from a previously removed infection?

Please uninstall the Asus Data Security Manager software as it shows up in quite a few of the BSOD's. Visit the Asus support website and download/install the latest 64 bit Win7 version of this software.

Also, the ATK0101 HOTKEY utility software dates from 2007. Please uninstall that verrsion and install the latest version available from the manufacturer's website ( ASUSTeK Computer Inc. -Support- Drivers and Download G60J ). It's under the ATK section in the downloads.

If these don't fix the problems, please post back and we'll start looking at hardware causes.

BSOD BUGCHECK SUMMARY

Code:

Loading Dump File [C:\Users\FUBAR\_jcgriff2_\dbug\__Kernel__\101511-19780-01.dmp]
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Sat Oct 15 22:03:59.880 2011 (UTC - 4:00)
System Uptime: 0 days 0:16:48.988
Probably caused by : Ntfs.sys ( Ntfs! ?? ::FNODOBFM::`string'+2b49 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: rundll32.exe
BUGCHECK_STR: 0x24
FAILURE_BUCKET_ID: X64_0x24_Ntfs!_??_::FNODOBFM::_string_+2b49
Bugcheck code 00000024
Arguments 00000000`001904fb fffff880`0b23ac48 fffff880`0b23a4a0 fffff800`032c5b65
BiosVersion = 203
BiosReleaseDate = 12/10/2009
CPUID: "Intel(R) Core(TM) i5 CPU M 430 @ 2.27GHz"
MaxSpeed: 2270
CurrentSpeed: 2266
??????????????????????????????????????????????????????????????????????????????????????``
Loading Dump File [C:\Users\FUBAR\_jcgriff2_\dbug\__Kernel__\101511-25677-01.dmp]
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Sat Oct 15 21:46:29.089 2011 (UTC - 4:00)
System Uptime: 0 days 0:16:57.572
*** WARNING: Unable to verify timestamp for AsDsm.sys
*** ERROR: Module load completed but symbols could not be loaded for AsDsm.sys
Probably caused by : AsDsm.sys ( AsDsm+19a5 )
BUGCHECK_STR: 0x1E_c0000005
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: explorer.exe
FAILURE_BUCKET_ID: X64_0x1E_c0000005_AsDsm+19a5
Bugcheck code 0000001E
Arguments ffffffff`c0000005 fffff800`032cdb65 00000000`00000000 ffffffff`ffffffff
BiosVersion = 203
BiosReleaseDate = 12/10/2009
CPUID: "Intel(R) Core(TM) i5 CPU M 430 @ 2.27GHz"
MaxSpeed: 2270
CurrentSpeed: 2266
??????????????????????... Read more

http://www.techsupportforum.com/forums/f299/bsods-possibly-related-to-ntoskrnl-exe-7cc40-file-606596.html
Relevancy 93.74%

Hey guys so I've been getting some random BSOD errors every few days or so I usually leave my computer on when I am at work or sleep and either when I come home Random BSOD error ntoskrnl.exe (address driver ntoskrnl.exe+74ec0) or wake up my computer is off So I turn it on and it says that the computer didn't Random BSOD error driver ntoskrnl.exe (address ntoskrnl.exe+74ec0) shut down properly when I start up I downloaded the BlueScreenView and noticed I've had some BSOD three times within days One Random BSOD error driver ntoskrnl.exe (address ntoskrnl.exe+74ec0) was a PAGE FAULT IN NONPAGED AREA error which I believe was a RAM problem i bought new RAM and installed it plus OCed it to but I believe it was making my system unstable so I reset the speed to default and haven't gotten that error again but after that I've gotten two IRQL NOT LESS OR EQUAL errors related to ntoskrnl exe I did some research online and from what I read it could be a number of problems I'm just not sure where to start and could really use some guidance and advice I uploaded my dmp files for anyone who knows how to look at these Thank in advance

A:Random BSOD error driver ntoskrnl.exe (address ntoskrnl.exe+74ec0)

Welcome to 7F. I'll take a look at your dumps and see if I can get you BSOD free.


One

 NETGEAR NEUTRAL WIRELESS SOLUTION

Your Netgear Neutral Wireless Solution driver has been flagged. It is quite old a could probably do with updating. Check for updates here
Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {0, 2, 1, fffff800034c88ac}

*** WARNING: Unable to verify timestamp for scmndisp.sys
*** ERROR: Module load completed but symbols could not be loaded for scmndisp.sys
Probably caused by : scmndisp.sys ( scmndisp+16d1 )

Followup: MachineOwner
---------

1: kd> lmvm scmndisp
start end module name
fffff880`0188b000 fffff880`01895000 scmndisp T (no symbols)
Loaded symbol image file: scmndisp.sys
Image path: \SystemRoot\system32\DRIVERS\scmndisp.sys
Image name: scmndisp.sys
Timestamp: Fri May 27 11:30:22 2011 (4DDF7D3E)
CheckSum: 00009C0C
ImageSize: 0000A000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4


Two

 HARDWARE DIAGNOSTICS

A few of your dumps (0x50, 0x124) are pointing towards hardware errors. 0x124s are usually always hardware errors but rarely give us an indication of what the problem actually is. In this case we may have struck lucky as this particular one shows up ASUS AI Suite III. The utilities listed below are the ones I'm concerned about.Attachment 353971


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa800752d028, Address of the WHEA_ERROR_RECORD structure.
Arg3: 00000000bf800000, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000000000124, Low order 32-bits of the MCi_STATUS value.

Debugging Details:
------------------
BUGCHECK_STR: 0x124_GenuineIntel

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

PROCESS_NAME: AISuite3.exe

CURRENT_IRQL: f

ANALYSIS_VERSION: 6.3.9600.17029 (debuggers(dbg).140219-1702) amd64fre
We have seen motherboard packaged utilities cause 0x124s in the past and it could be the case here.
Uninstall ASUS AI Suite III and test the system for stability.
Run SeaTools to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use
Download and run MemTest86+ to test your RAM. RAM - Test with Memtest86+


   Note
Attachment 353972 Run MemTest86+ for at least 8 passes. Ideally set it off before you go to bed and leave it overnight, we're looking for zero errors here. A single error will show something's going bad with your RAM.


Three

 NVIDIA GPU

You've also received a 0x116 which is a VIDEO_TDR_ERROR (Timeout Detection & Recovery) which means your GPU driver has crashed and has failed to recover in time. This could be down to the driver, the card itself or possibly the power to the card.
Code:
******************************************************************************... Read more

http://www.sevenforums.com/bsod-help-support/365399-random-bsod-error-driver-ntoskrnl-exe-address-ntoskrnl-exe-74ec0.html
Relevancy 93.31%

Hi to make things easier for you dxgmms1.sys,ntoskrnl.exe,Ntfs.sys BSOD Address:ntoskrnl.exe+75bc0; below is the Bug Check String Driver and crash address SYSTEM SERVICE EXCEPTION dxgmms sys ntoskrnl exe bc MEMORY MANAGEMENT ntoskrnl exe ntoskrnl exe bc SYSTEM SERVICE EXCEPTION ntoskrnl exe ntoskrnl exe bc NTFS FILE SYSTEM Ntfs sys ntoskrnl exe bc IRQL NOT LESS OR EQUAL ntoskrnl exe ntoskrnl exe bc unrelated how could I make nice table above I have searched the forum Problem BSOD randomly usually graphics related eg flash games in chrome graphics related software Mathematica Problem I use an internet usb G device to connect to internet Every morning the device will not connect to internet and computer will hang on shutting down screen when I BSOD Address:ntoskrnl.exe+75bc0; dxgmms1.sys,ntoskrnl.exe,Ntfs.sys restart I have to manually turn off and back on again I think this may be a dying capacitor on motherboard that needs boot's to get excited Problem Chrome quot aw snap quot happens regularly and is usually flash content related even ad banners seem to cause it from time to time I have reinstalled chrome checked plugins etc etc no luck Internet explorer runs stable but for example in flash games it seems to momentarily freeze and then catch up BSOD Address:ntoskrnl.exe+75bc0; dxgmms1.sys,ntoskrnl.exe,Ntfs.sys with itself again These are moments where I think chrome would have crashed Things I've done SFC scan All's well Memtest I did pass it took an hour everything fine Will put it on over night tonight Checked for latest drivers Also have latest BIOS Checked win update Ran Intel Burn everything ok max stress over Gb RAM run min max temp thank you Noctua NH-C P this is with quiet adaptor too lol Ran malwarebytes found nothing toxic Ran SSDlife Free health SSD seems fine Bought a new motherboard assuming that the current one is going bad I haven't switched over to it yet and thought I should investigate a little further before I do ie bad RAM CPU Power Supply SSD CPU seems fine RAM passed test but will test further My own quot opinion quot until today was that there is a fault on motherboard probably with usb hardware Now I realise that it could be the power supply but I have no way to test this bar buy a new one My analysis bad motherboard or bad PSU Either way not getting away with cheap fix methinks UPDATE I enabled verifier exe using this Driver Verifier - Enable and Disable Windows crashes just before going to desktop I had to boot last known config to get up and running again IE I CAN RELIABLY CREATE BSOD USING VERIFIER EXE WITH GIVEN INSTRUCTIONS So I am going to try focusing on drivers loaded at startup by process of elimination Is there a quick way to find out which one Below is the Check String Driver and crash address for the BSOD's when using verifier exe IRQL NOT LESS OR EQUAL ntoskrnl exe ntoskrnl exe bc DRIVER IRQL NOT LESS OR EQUAL RNDISMPX SYS RNDISMPX SYS a UPDATE If I choose or more non Microsoft drivers in verifier exe I get BSOD different check strings but always at the same address Also computer seems more unstable since engaging with verifier exe I feel I have given a thorough evaluation based on information in this forum and would appreciate feedback from those with more expertise than I UPDATE Another Memtest gave errors on pass Questions any chance poor power supply can cause this anyone have experience increasing voltage to make this go away would bad RAM explain all my problems ok fine i'll go through RAM and the slots and find the bad one sigh major sigh positively tragic sigh UPDATE Started with slot with stick of RAM Did memtest but had an idea I turned on verifier exe with all rd party drivers selected and my theory was to replicate the BSOD I got earlier at startup Went through each slot each RAM combo's of RAM and then to add insult to injury with all sticks in exactly same as before no BSOD Life is tough So maybe RAM wasn't properly seated all this time or maybe I need to test the RAM proper... Read more

A:BSOD Address:ntoskrnl.exe+75bc0; dxgmms1.sys,ntoskrnl.exe,Ntfs.sys

**************UPDATE 5 ****************




The sequence of events went as follows.
RAM test 1 pass was passed. Verifier.exe caused immediate BSOD on windows start when activated. Trying to hunt down drivers revealed any combo of 3 or more drivers gave BSOD at startup. Randomly decided to recheck RAM. Failed memtest after 27 minutes pass 1. Found one RAM stick that passed after one pass slot0. Got fed up of waiting for other slot's. Devised a plan to use verifier to check the RAM by seeing which combo's of RAM sticks gave BSOD on startup. All combo's passed. And now verifier does not give BSOD on any setting. Began to hate life. Cheered myself up with prospect of sleep. Put all 16 Gb RAM in properly and ran mentest for 18 hours, 6 passes. No error. Still no verifier.exe errors when enabled. Wrote this update.


If RAM failed after 27min one test, and then after swapping around a retest of 18 hours has no error, one would presume the RAM may be ok. Equally, I believe one could say the RAM is suspect. So, if the test is failed it really doesn't tell us anything except there is a problem somewhere. But we know there is a problem since we have BSOD!!! If I hadn't rerun the test I wouldn't question the RAM.

So the question is: how do I categorically ensure that a stick of RAM is good? Is memtest on RAM with an alternative working computer enough?



In summary:

I ran memtest for 18 hours, which was 6 passes. No problems detected. Using verifier.exe with protocols given on this forum I no longer get BSOD.

Currently my hypothesis is that the RAM was never seated correctly, or given that it takes a bit of force to insert correctly into motherboard, the flexing has at least temporarily defused whatever fault was causing my BSOD. Tenuous I know. But I really have no other explanation other than something somewhere on the motherboard or power is failing, or even the RAM.

http://www.sevenforums.com/bsod-help-support/351171-bsod-address-ntoskrnl-exe-75bc0-dxgmms1-sys-ntoskrnl-exe-ntfs-sys.html
Relevancy 93.31%

Jan , Crash Address All !! BSOD ntoskrnl.exe+80640 the Time ntoskrnl.exe ------------------------------------------- How to Solve - I've uninstalled my windows and recover my laptop with recovery DVD to it's original factory state original windows - Never installed Norton internet security again I'm using Microsoft Security Essentials now - Updated my Graphic Card Driver Intel Wifi Driver Sound Card Driver And some other drivers It's been two months now with no BSOD Thanks to dear Arc and gregrocker Thank you guys ------------------------------------------- Oct ------------------------------------------- Hi guys It's almost a year that I have problems with BSOD ntoskrnl.exe , All the Time !! Crash Address ntoskrnl.exe+80640 BSODs it use to be Atikmdag BSOD but I solve that with updating my Graphic card Driver and Changing Atikmdag sys file in Windows System folder But now it's about months that I get ntoskrnl exe BSODs in lot's of situations Web surfing Windows log on Working with Unity Working with files and Really lot's of Times Even in Safe Mode with Networking I guess it's because of my Network driver because I got BSOD in Safe Mode with Network but I never got a BSOD in normal Safe mode BTW I dunno how to solve it Please Help me these BSODs are sooooooooo annoying Here is my System Specs It's Msi GX CPU Intel R Core TM i CPU M GHz Main MICRO-STAR INTERNATIONAL CO LTD MS- Bios BIOS Date Ver Memory GB HDD ST AS ATA Device Sound Card AMD High Definition Audio Device High Definition Audio Device Graphic ATI Mobility Radeon HD Series - GB GDDR OS Microsoft Windows Ultimate -bit Multiprocessor Free Service Pack it's weird that I've finished writing this without a BSOD Here is the Zip file Created with SF Diagnostic Tool

A:BSOD ntoskrnl.exe , All the Time !! Crash Address ntoskrnl.exe+80640

Code:
fffff800`00b9cc48 fffff880`010b75fcUnable to load image \SystemRoot\System32\Drivers\sptd.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for sptd.sys
*** ERROR: Module load completed but symbols could not be loaded for sptd.sys
sptd+0x4b5fc
Daemon Tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known BSOD causer. Uninstall Alcohol 120% at first. Then download SPTD standalone installer from Disk-Tools.com, and execute the downloaded file as guided below :
Double click to open it.
Click this button only:

If it is grayed out, as in the picture, there is no more SPTD in your system, and you just close the window.
Next uninstall Virtual CloneDrive, as vclone.sys is as fatal as SPTD.sys, too.
After doing these two, report the situation back.

http://www.sevenforums.com/bsod-help-support/309093-bsod-ntoskrnl-exe-all-time-crash-address-ntoskrnl-exe-80640-a.html
Relevancy 93.31%

I'm getting random Blue Screens and can't figure out why. I'm not running any hardcore programs. I'm mostly just using Microsoft Office and Firefox. The BSOD's seem to happen when I'm in Outlook, Excel or Firefox. Haven't been able to determine exactly which at the time as I'm moving back and forth between them quite often.

I've tried the SFC command and it didn't find anything. I used BlueScreenViewer but not a lot of help. All drivers for sound and video have been updated. I've also updated the firmware to the Crucial M4 SSD version 040H.

Any insight would be great.

Specs:
Laptop - HP EliteBook 8560w
CPU - Intel i7-2670QM
RAM - Hynix/Hyundai 8.0 GB Ram
SSD - M4-CT256M4 SSD
Audio - AMD High Definition Audio
Video - AMD FirePro M5950
OS - Windows 7 Pro 64-bit

A:Random BSOD Reporting ntoskrnl.exe+75c40 & ntoskrnl.exe+7efc0

Update the firmware of your Crucial M4-CT256M4SSD2.

And, Uninstall McAfee Using McAfee Removal Tool. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.
Download, install and update those, and then run full system scans with both of them, one by one.

Free up the startup.
Click on the Start button
Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the “Startup” tab.
Deselect all items other than the antivirus and touchpad driver SynTPEnh.
Apply > OK
Accept then restart.
Let us know the results.

http://www.sevenforums.com/bsod-help-support/281927-random-bsod-reporting-ntoskrnl-exe-75c40-ntoskrnl-exe-7efc0.html
Relevancy 93.31%

BSOD random, probably under heavy load situations. I dont know how to do.


DM log collector file attached

many thanks

A:BSOD random most times ntoskrnl.exe+748c0 and ntoskrnl.exe+74ec0

Hi berdini.


Code:
DEFAULT_BUCKET_ID: GS_FALSE_POSITIVE_MISSING_GSFRAME
Scan the system for possible virus infection with the following programs.
Anti-rootkit utility TDSSKiller
Windows Defender Offline
Let us know the results.
____________________________________

Code:
BugCheck F7, {fffff8800a01ff08, f8800125d135, ffff077ffeda2eca, 0}

Probably caused by : Ntfs.sys ( Ntfs!_report_gsfailure+26 )

Followup: MachineOwner
---------

http://www.sevenforums.com/bsod-help-support/373211-bsod-random-most-times-ntoskrnl-exe-748c0-ntoskrnl-exe-74ec0.html
Relevancy 93.31%

i keep getting BSOD when playing game new graphics i dont know where to start when its comes to BSOD stuff

110414-10576-01.dmp 11/4/2014 10:48:39 PM 0x00000124 00000000`00000000 fffffa80`0af318f8 00000000`00000000 00000000`00000000 ntoskrnl.exe ntoskrnl.exe+4a63cc NT Kernel & System Microsoft? Windows? Operating System Microsoft Corporation 6.1.7600.16385 (win7_rtm.090713-1255) x64 ntoskrnl.exe+4a63cc C:\Windows\Minidump\110414-10576-01.dmp 6 15 7600 262,144 11/4/2014 10:48:41 PM is some info i dont know what else yall need

A:0x00000124 ntoskrnl.exe ntoskrnl.exe+4a63cc BSOD Error runninganygame

Please Help

http://www.sevenforums.com/bsod-help-support/351242-0x00000124-ntoskrnl-exe-ntoskrnl-exe-4a63cc-bsod-error-runninganygame.html
Relevancy 93.31%

Got my first blue screen of death tonight had firefox opened one watching youtube video another browsing internet After bsod /adress (ntoskrnl.exe+72a40) caused by driver (ntoskrnl.exe) BSOD it restarted i login but just black screen with cursor ctrl alt delete worked so i shut my computer down Boot up normally after check my minidump file bsod cause BSOD caused by driver (ntoskrnl.exe) /adress (ntoskrnl.exe+72a40) by ntoskrnl exe Did little search on google find BSOD caused by driver (ntoskrnl.exe) /adress (ntoskrnl.exe+72a40) has to do with ram and hard drive Downloaded wd data life guard diagnostic for my mechanic drive which is healthy but my ssd on shows failed end to end error rate value threshold worst is all in SMART statue Im not sure if i can trust this wd diagnostic on my crucial ssd there are alot of unknown in SMART statue too Theres no ssd diagnotic for crucial there is a firmware not sure if it helps So i downloaded and ran crystaldiskinfo on my ssd health statues says good it doesnt say end to end error rate like wd Instead same ID B line says quot unused reserve nand blocks quot instead Is my ssd good i havent ran a test on my ram yet This is almost month old build Asrock x x killer i k gtx w crucial x gb crucial gb ssd wd blue tb Heres info of bsod with bluescreenview Bug Check String- IRQL GT ZERO AT SYSTEM SERVICE Bug Check Code - x a Parameter - dc a Parameter - Parameter - Parameter - fffff b Caused By Driver- ntoskrnl exe Caused By Address- ntoskrnl exe a File Description- NT Kernel amp System

A:BSOD caused by driver (ntoskrnl.exe) /adress (ntoskrnl.exe+72a40)

Blue Screen of Death (BSOD) Posting Instructions

http://www.sevenforums.com/bsod-help-support/367819-bsod-caused-driver-ntoskrnl-exe-adress-ntoskrnl-exe-72a40.html
Relevancy 92.45%

When I put my pc in sleep mode it often crashes: the screen goes normally in sleep mode, but the pc continues to stay awake for several minutes than BSOD & restart or BSOD & shut off.
Thanks to BlueScreenView I found what is seemingly the guilty process, but I don't know what to do now.
Attachment 315989
Thanks
Also, sorry for my bad english.

A:BSOD when goes sleep, ntoskrnl.exe+e96d2/ntoskrnl.exe+81e7a

Your HUAWEI Mobile Connect driver is causing issues here.


Code:
*** WARNING: Unable to verify timestamp for ew_jubusenum.sys
*** ERROR: Module load completed but symbols could not be loaded for ew_jubusenum.sys
Probably caused by : ew_jubusenum.sys
If it's a necessary driver then update it but if not then please completely remove it.
I'm not that familiar with such devices but it should be under Network Adapters, right click on the device and click properties, then click on the driver tab and update.


Code:
fffff880`015e0000 fffff880`015fc000 ew_jubusenum T (no symbols)
Loaded symbol image file: ew_jubusenum.sys
Image path: \SystemRoot\system32\DRIVERS\ew_jubusenum.sys
Image name: ew_jubusenum.sys
Timestamp: Mon Aug 20 01:55:56 2012 (50318B1C)
CheckSum: 0001CF99
ImageSize: 0001C000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

http://www.sevenforums.com/bsod-help-support/330151-bsod-when-goes-sleep-ntoskrnl-exe-e96d2-ntoskrnl-exe-81e7a.html
Relevancy 90.73%

Hello Recently I got a few bluescreens while playing World of Warcraft which I thought was very weird because all of my hardware is pretty new Here is some info about my computer Intel i - GHZ EVGA GTX SSC super superclocked - the fans are designed not to turn on until card reaches c gb Hyper X Fury ram tb WD Black HDD Windows OS At first I noticed three bluescreens then I used EVGA Precision X with a custom aggressive fan profile and BSOD ntoskrnl.exe+74ec0 ntoskrnl.exe address the problem went away temporarily but then the computer crashed later on I'm not sure if that's relevant or not I ran a diagnostic on my harddrive and processor and both were fine The RAM seems more difficult to test because it said something about usb drives so I decied to stray away from that unless it was absolutely necessary and then get help from someone who BSOD ntoskrnl.exe address ntoskrnl.exe+74ec0 knows what they're doing I am going to upload the dump files that were saved by bluescreenview Any help at all would be greatly appreciated

A:BSOD ntoskrnl.exe address ntoskrnl.exe+74ec0

CRITICAL_OBJECT_TERMINATION BSODs (0xf4) are usually related to an issue with the hard drive.

If you have an SSD, make sure that the firmware is upgraded.

If HDD, run SeaTools for DOS, LONG test - Hard Drive (HDD) Diagnostics - Sysnative Forums

Regards. . .

jcgriff2

`

http://www.techsupportforum.com/forums/f299/bsod-ntoskrnl-exe-address-ntoskrnl-exe-74ec0-975273.html
Relevancy 90.73%

i am having this problem after i change my video cards i upgraded a 460 SLI to a 680
i have run 3dmark11 to try to replicate the bsod or something and nothing happends
i clean my hardware and change the thermal compound then i played some bf3 and paff the same bsod =(

pd: sorry for my english
i forgot to say that i have the last beta drivers from nvidia because with the WHQL i was having problems in gw2
Attachment 231326

A:BSOD playing bf3, hal.dll hal.dll+12a3b , ntoskrnl.exe ntoskrnl.exe+18

Welcome

For the bug check you're getting go through:
Stop 0x124 - what it means and what to try

Also get a latest version of your BIOS.


Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Yusra\Downloads\Fayer\SF_11-09-2012\091112-23509-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
Machine Name:
Kernel base = 0xfffff800`03667000 PsLoadedModuleList = 0xfffff800`038ab670
Debug session time: Wed Sep 12 06:29:05.072 2012 (UTC + 6:00)
System Uptime: 0 days 7:04:57.025
Loading Kernel Symbols
...............................................................
................................................................
................................
Loading User Symbols
Loading unloaded module list
.....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 124, {0, fffffa80086cf028, ba000000, 400405}

*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : hardware

Followup: MachineOwner
---------

5: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa80086cf028, Address of the WHEA_ERROR_RECORD structure.
Arg3: 00000000ba000000, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000000400405, Low order 32-bits of the MCi_STATUS value.

Debugging Details:
------------------
BUGCHECK_STR: 0x124_GenuineIntel

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

PROCESS_NAME: System

CURRENT_IRQL: f

STACK_TEXT:
fffff880`030acb58 fffff800`03630a3b : 00000000`00000124 00000000`00000000 fffffa80`086cf028 00000000`ba000000 : nt!KeBugCheckEx
fffff880`030acb60 fffff800`037f3b03 : 00000000`00000001 fffffa80`0860b890 00000000`00000000 fffffa80`0860b8e0 : hal!HalBugCheckSystem+0x1e3
fffff880`030acba0 fffff800`03630700 : 00000000`00000728 fffffa80`0860b890 fffff880`030acf30 fffff880`030acf00 : nt!WheaReportHwError+0x263
fffff880`030acc00 fffff800`03630052 : fffffa80`0860b890 fffff880`030acf30 fffffa80`0860b890 00000000`00000000 : hal!HalpMcaReportError+0x4c
fffff880`030acd50 fffff800`0362ff0d : 00000000`00000008 00000000`00000001 fffff880`030acfb0 00000000`00000000 : hal!HalpMceHandler+0x9e
fffff880`030acd90 fffff800`03623e88 : 0000003b`5e9a7a72 fffffa80`0ae15ac8 00000000`00000000 00000000`00000000 : hal!HalpMceHandlerWithRendezvous+0x55
fffff880`030acdc0 fffff800`036e4aac : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : hal!HalHandleMcheck+0x40
fffff880`030acdf0 fffff800`036e4913 : 00000000`00000000 00000... Read more

http://www.sevenforums.com/bsod-help-support/252352-bsod-playing-bf3-hal-dll-hal-dll-12a3b-ntoskrnl-exe-ntoskrnl-exe-18-a.html
Relevancy 90.73%

I keep getting a BSOD (Critical_Object_Termination) but have no idea what is causing the issue. I tried in vain to debug my own minidump files but ended up getting nowhere.

So far i have run MemTest over the weekend with 107 passes. I also ran Prime95 64-bit for 4 hours on each of the FFT tests without error.

I have enabled driver verifier (following the guide on this site) and this has not caused anynew BSOD's.

I also get a random BSOD on startup but it has happened so infrequently i have been unable to boot with disable automatic restart on system failure enabled to capture the stop code.

I really could do with some expert advice please.

This is my first post so i apologise if i have missed something important but i have tried to read as much info as possible before posting.

A:BSOD Ntoskrnl.exe+7efc0 and Ntoskrnl.exe+75c40

Unusual one you got there think it may be a windows problem please run sf tool and upload all files not just dumps and try running an sfc scan
SFC /SCANNOW Command - System File Checker option 2

Check system temperatures also

http://www.sevenforums.com/bsod-help-support/281212-bsod-ntoskrnl-exe-7efc0-ntoskrnl-exe-75c40.html
Relevancy 90.73%

Does anyone have any idea what could be causing these BSOD errors? It started with the +74200 error about a month ago (enduser is just now informing IT) and now it is the +73c40. I've already done several Memory tests to no avail. I'm about to just
reimage but don't want to if it's just a driver issue. 

Thanks
TravisD

https://social.technet.microsoft.com/Forums/en-US/afea0b11-7904-4025-8dd6-c76d6cfa02d8/ntoskrnlexe74200-amp-ntoskrnlexe73c40-bsod?forum=w8itprogeneral
Relevancy 90.73%

Hi there,

Recently I've been getting BSOD while playing WoW. I'm not sure what details to give other than the dump so I'll just tell you about my computer:

Intel i5 4690 3.5-3.9 GHZ
EVGA GTX 970 SSC (super superclocked - the fans are designed not to turn on until card reaches 60c)
16gb Hyper X Fury ram
1tb WD Black HDD
Windows 7 OS

I noticed that I haven't crashed yet while EVGA Precision X is up (it has a custom aggressive fan curve I made). Maybe this has to do with the fact that it replaces fan drivers, or something? I don't know. I'm pretty clueless as to what's going on because all these parts are pretty new and it only recently started, but it's crashed three times today. Here are the dumps.
Any help you guys can give would be greatly greatly appreciated. Thanks a ton!
 

A:BSOD ntoskrnl.exe address ntoskrnl.exe+74ec0

Any ideas? It happened again while using EVGA Precision.
 

https://forums.techguy.org/threads/bsod-ntoskrnl-exe-address-ntoskrnl-exe-74ec0.1145229/
Relevancy 87.29%

Hi

A few days ago I did a new hardware build and installed W7 64 ultimate. I included a Corsair SSD as my boot drive for the speed advantage.

I have done some investigation and tried to track down the cause of the BSOD but to no avail. Currently they are happening once\ twice or more a day but very erratic so have no confidence in the system at the moment.

I have uploaded dumps of recent crashes in the hope someone here can help.

Anything would be appreciated. Thanks.

A:random BSODs with new build - error related to "ntoskrnl.exe+7cc40"?

Run a RAM test RAM - Test with Memtest86+
Stop any Overclocking if any.

Remove any Avast software, use MSE instead.
Uninstall Asus PC Probe, Smart Doctor, Asus update or any other Asus utilities.

Are you using any old(pre-Vista) software that might not be 64-bit compatible?


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

CRITICAL_STRUCTURE_CORRUPTION (109)
This bugcheck is generated when the kernel detects that critical kernel code or
data have been corrupted. There are generally three causes for a corruption:
1) A driver has inadvertently or deliberately modified critical kernel code
or data. See http://www.microsoft.com/whdc/driver/kernel/64bitPatching.mspx
2) A developer attempted to set a normal kernel breakpoint using a kernel
debugger that was not attached when the system was booted. Normal breakpoints,
"bp", can only be set if the debugger is attached at boot time. Hardware
breakpoints, "ba", can be set at any time.
3) A hardware corruption occurred, e.g. failing RAM holding kernel code or data.
Arguments:
Arg1: a3a039d89c614680, Reserved
Arg2: b3b7465eeede15d6, Reserved
Arg3: fffff80001dfe036, Failure type dependent information
Arg4: 0000000000000001, Type of corrupted region, can be
0 : A generic data region
1 : Modification of a function or .pdata
2 : A processor IDT
3 : A processor GDT
4 : Type 1 process list corruption
5 : Type 2 process list corruption
6 : Debug routine modification
7 : Critical MSR modification

Debugging Details:
------------------
BUGCHECK_STR: 0x109

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: CODE_CORRUPTION

PROCESS_NAME: System

CURRENT_IRQL: 0

LAST_CONTROL_TRANSFER: from 0000000000000000 to fffff80001cd0c40

STACK_TEXT:
fffff880`021c45d8 00000000`00000000 : 00000000`00000109 a3a039d8`9c614680 b3b7465e`eede15d6 fffff800`01dfe036 : nt!KeBugCheckEx
STACK_COMMAND: kb

CHKIMG_EXTENSION: !chkimg -lo 50 -d !nt
fffff80001dfe44d - nt!ExDeferredFreePool+9ed
[ 40:00 ]
1 error : !nt (fffff80001dfe44d)

MODULE_NAME: memory_corruption

IMAGE_NAME: memory_corruption

FOLLOWUP_NAME: memory_corruption

DEBUG_FLR_IMAGE_TIMESTAMP: 0

MEMORY_CORRUPTOR: ONE_BIT

FAILURE_BUCKET_ID: X64_MEMORY_CORRUPTION_ONE_BIT

BUCKET_ID: X64_MEMORY_CORRUPTION_ONE_BIT

Followup: memory_corruption
---------

http://www.sevenforums.com/bsod-help-support/202579-random-bsods-new-build-error-related-ntoskrnl-exe-7cc40.html
Relevancy 77.83%

Hello everyone I have been having some problems with my windows I upgraded from windows about one and a half month ago I had many problems all around with multiple BSOD per week I took up the opportunity to format my HDDs and did a clean installation of windows I had some problems with BSOD at the start but I followed the instructions provided on this link DISM - Repair ntoskrnl.exe+142770 ntoskrnl.exe+142760 BAD_POOL_MEMORY AND Windows Image There was some corruption that was found and repaired I even run a memtest with passes for a grand total of errors This happened at around the rd or th of January Two weeks passed without the slightest of problems until yesterday were I BAD_POOL_MEMORY ntoskrnl.exe+142770 AND ntoskrnl.exe+142760 had a complete system freeze had to press the reset button after minutes Since I didn't get a BSOD I couldn't really research the problem to find a solution I quot ignored quot the problem Tonight I had a BSOD so I thought about asking for your help with this problem My usual routine all BSOD seemed to happen when I was doing this includes having a Mozilla Firefox open with multiple tabs open like facebook youtube mail etc skype and usually World of Warcraft Since my pc is a bit old I have overclocked the cpu to be able to handle the increased punishment The first two BSOD I had was with a default set CPU so I m not sure if this has any impact Any help would be greatly appreciated I've uploaded the logs through the tool that I found on the sticky post WARMACHINE-PC- -Jan- zip Thanks in advance

A:BAD_POOL_MEMORY ntoskrnl.exe+142770 AND ntoskrnl.exe+142760

All dumpfiles are network related mentioning of afd.sys, tcpip.sys
2 dumpfiles flagged networx.sys

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 139, {3, ffffd00022b382d0, ffffd00022b38228, 0}
*** WARNING: Unable to verify timestamp for networx.sys
*** ERROR: Module load completed but symbols could not be loaded for networx.sys
Probably caused by : Pool_Corruption ( nt!ExFreePool+bcd )
Followup: Pool_corruption
--
Please update to the latest version of networx
Driver Description: NetWorx
Driver Update Site: http://www.softperfect.com/products/networx/
If this not stops the BSOD, remove/uninstall it.

http://www.tenforums.com/bsod-crashes-debugging/37918-bad_pool_memory-ntoskrnl-exe-142770-ntoskrnl-exe-142760-a.html
Relevancy 75.25%

Hi there My machine is running VISTA Business -bit edition Yesterday when Another like NTOSKRNL-HOOK, seems season its NTOSKRNL I tried to boot my PC up it took minutes and on log-on displayed quot Configuring Windows Desktop quot and on entering I had a brand new desktop with most of my files in locations I don't know where So I started my Mcafee scan and Another NTOSKRNL-HOOK, seems like its NTOSKRNL season it Another NTOSKRNL-HOOK, seems like its NTOSKRNL season said found NTOSKRNL-HOOK Trojan not one but TWO It deleted and when I scanned again there were again After consecutive scans it goes on and the same GMER says its a rootkit infection I am attaching my DDS and Attach zip rar Another NTOSKRNL-HOOK, seems like its NTOSKRNL season here and once again thank you guys for the awesome job you are doing for everybody I really appreciate it Thanks -------------------------------------- DDS ------------------------------- DDS Ver - - - NTFSx Run by Home at on Wed Internet Explorer BrowserJavaVersion Microsoft Windows Vista Business GMT - AV McAfee VirusScan On-access scanning enabled Updated FW McAfee Personal Firewall enabled Running Processes C Windows system wininit exe C Windows system lsm exe C Windows system svchost exe -k DcomLaunch C Windows system nvvsvc exe C Windows system svchost exe -k rpcss C Windows System svchost exe -k LocalServiceNetworkRestricted C Windows System svchost exe -k LocalSystemNetworkRestricted C Windows system svchost exe -k netsvcs C Windows system svchost exe -k GPSvcGroup C Windows system SLsvc exe C Windows system svchost exe -k NetworkService C Windows system rundll exe C Windows system svchost exe -k LocalService C Windows System spoolsv exe C Windows system svchost exe -k LocalServiceNoNetwork C Windows system Dwm exe C Windows Explorer EXE C Program Files Common Files Real Update OB realsched exe C Program Files McAfee com Agent mcagent exe C Program Files McAfee Anti-Theft McPvTray exe C Program Files Ashampoo Ashampoo AntiSpyWare AntiSpyWare Guard exe C Program Files DAEMON Tools Lite daemon exe C Program Files Internet Download Manager IDMan exe C Users Home AppData Local Google Update GoogleUpdate exe C Program Files Windows Live Messenger msnmsgr exe C Program Files Windows Media Player wmpnscfg exe C Program Files PIXELA ImageMixer SE Ver CameraMonitor exe C Program Files Logitech SetPoint SetPoint exe C Program Files Common Files Logishrd KHAL KHALMNPR EXE C Program Files Ashampoo Ashampoo AntiSpyWare AntiSpyWareService exe C Windows system svchost exe -k hpdevmgmt C Program Files Google Update GoogleUpdate exe C Program Files McAfee SiteAdvisor McSACore exe c PROGRA COMMON mcafee mcproxy mcproxy exe C Windows system rundll exe C PROGRA McAfee VIRUSS mcshield exe C Program Files McAfee MPF MPFSrv exe C Program Files Microsoft SQL Server DTS Binn MsDtsSrvr exe C Program Files McAfee MSK MskSrver exe C Program Files Microsoft SQL Server MSAS SQLSERVER OLAP bin msmdsrv exe C Program Files Microsoft SQL Server MSSQL SQLSERVER MSSQL Binn sqlservr exe C Windows System svchost exe -k HPZ C Windows System svchost exe -k HPZ C Program Files Microsoft SQL Server MSRS SQLSERVER Reporting Services ReportServer bin ReportingServicesService exe C Program Files Microsoft SQL Server Shared sqlbrowser exe C Program Files Microsoft SQL Server Shared sqlwriter exe C Windows system svchost exe -k imgsvc C Windows System svchost exe -k WerSvcGroup C Windows system SearchIndexer exe C Program Files Microsoft SQL Server MSSQL SQLSERVER MSSQL Binn SQLAGENT EXE C PROGRA McAfee MSC mcmscsvc exe C Program Files Microsoft SQL Server MSSQL SQLSERVER MSSQL Binn fdlauncher exe C Program Files Microsoft SQL Server MSSQL SQLSERVER MSSQL Binn fdhost exe C Program Files Internet Download Manager IEMonitor exe C PROGRA McAfee VIRUSS mcsysmon exe c PROGRA COMMON mcafee mna mcnasvc exe C PROGRA McAfee VIRUSS mcods exe C Windows system wbem wmiprvse exe C Windows system vssvc exe C Windows System svchost exe -k swprv C... Read more

A:Another NTOSKRNL-HOOK, seems like its NTOSKRNL season

Hi and welcome to TSF.

I am currently reviewing your log. Please note that this is under the supervision of an expert analyst, and I will be back with a fix for your problem as soon as possible.

You may wish to subscribe to this thread to get immediate notification of replies as soon as they are posted. To do this click Thread Tools, then click Subscribe to this Thread. Make sure it is set to Instant Notification, then click Subscribe.

Please be patient with me during this time.

Mark

http://www.techsupportforum.com/forums/f100/another-ntoskrnl-hook-seems-like-its-ntoskrnl-season-362470.html
Relevancy 75.25%

okay so I've been having problems with this computer since day one. and its not even a year old. I just redid my HDD casue my windows 7 just bricked out of no where couldnt get into safe mode either. so got my files and redid my pc. and now i keep getting this error. i posted the results from the diagnostics tool. i'm starting to think maybe the SSD that the os is installed on is bad or maybe my ram is bad.

A:IRQL_NOT_LESS_OR_EQUAL ntoskrnl.exe/ntoskrnl.exe+75c00

Post this report:Activation Issue Posting Instructions

http://www.sevenforums.com/bsod-help-support/297357-irql_not_less_or_equal-ntoskrnl-exe-ntoskrnl-exe-75c00.html
Relevancy 70.52%

Hi guys. I just installed vista 64 onto my hp laptop today with all the drivers, and I got a random BSOD a few minutes ago. Here is the dump:

==================================================
Dump File : Mini021216-01.dmp
Crash Time : 12/02/2016 12:21:10 AM
Bug Check String : IRQL_NOT_LESS_OR_EQUAL
Bug Check Code : 0x0000000a
Parameter 1 : 0000099e`0000007e
Parameter 2 : 00000000`00000002
Parameter 3 : 00000000`00000001
Parameter 4 : fffff800`01abe443
Caused By Driver : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+5a450
File Description :
Product Name :
Company :
File Version :
Processor : x64
Crash Address : ntoskrnl.exe+5a450
Stack Address 1 :
Stack Address 2 :
Stack Address 3 :
Computer Name :
Full Path : C:\Windows\Minidump\Mini021216-01.dmp
Processors Count : 2
Major Version : 15
Minor Version : 6002
Dump File Size : 269,768
Dump File Time : 12/02/2016 12:23:01 AM
==================================================


It's an IRQL one so I don't think it's hardware related. Help would be much appreciated. I'm afraid that it will BSOD again.

A:BSOD ntoskrnl.exe

Here are the dump files.

This is my system:

? OS - Windows 8.1, 8, 7 or Vista? Windows Vista Home Premium x64
? x86 (32-bit) or x64 ? x64
? What was the original installed OS on the system? Windows Vista Home Premium x64
? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)? Retail. not OEM
? Approximate age of system (hardware) 8 years
? Approximate age of OS installation (if you know) 4 hours
? Have you re-installed the OS? yes

? CPU Intel Core 2 Duo T7700
? Video Card ATi Mobility Radeon HD 2600 XT
? System Manufacturer Hewlett Packard
? Exact model number (if laptop, check label on bottom) HDX9000

Laptop

http://www.techsupportforum.com/forums/f299/bsod-ntoskrnl-exe-1093738.html
Relevancy 70.52%

Hi all i have windows ultimate everything worked fine till this morning lately i had some bsod appearing in BSOD ntoskrnl Win with 7 and Help oncei n a while but after a couple of reboot everything worked fine again til ltoday Help with BSOD in Win 7 and ntoskrnl when the pc stay on for mintues then get the bsod again i checked the minidump and it appeared that the problem was due to Poweriso virtual drive so i removed the driver the program and everything related Help with BSOD in Win 7 and ntoskrnl to it but still no avail the minidump though mention that the problem is notskrnl exe what it could be i haven t installed anything recently beside that poweriso program and all dirvers are up to date here s the dump hoep someone can help me forgot to add i also have daemont tools as a virtua ldrive but i never had trobules with that although some peopel states ti could eb the problem also in safe mode everything seems to work fine so it must be something related to a software issue and not hardwre as i thought also the windows quot slvinc pc issues quot that appears on the bottom right of teh task bar says this quot Download updates for PX Engine PX Engine has stopped working properly and give me a link to the roxio web page i never had any roxio cd burning programs nor driver or device so i don t know where windows took this thing anyway i installed the driver the link gave me and still no solution nbsp

A:Help with BSOD in Win 7 and ntoskrnl

i need help,if anyone knowas nttyhing,please reply
 

http://www.techspot.com/community/topics/help-with-bsod-in-win-7-and-ntoskrnl.157919/
Relevancy 70.52%

Please help ump File - - dmp Crash Time PM Bug Check String IRQL NOT LESS OR EQUAL Bug Check Code x a Parameter fffffa c cd aa Parameter Parameter Parameter fffff f Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe efc File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win sp gdr - Processor x Crash Address ntoskrnl exe ntoskrnl.exe - Bsod efc Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time AM Bug Check String SYSTEM SERVICE EXCEPTION Bug Check Code x b Parameter c Parameter fffff b f Parameter fffff cbf Parameter Caused By Driver hal dll Caused By Address hal dll ce File Description Product Name Company File Version Processor x Crash Address ntoskrnl exe efc Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Bsod - ntoskrnl.exe Size Dump File - - dmp Crash Time AM Bug Check String IRQL NOT LESS OR EQUAL Bug Check Code x a Parameter Parameter Parameter Parameter fffff f a Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe efc File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win sp gdr - Processor x Crash Address ntoskrnl exe efc Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Bsod - ntoskrnl.exe nbsp

https://forums.techguy.org/threads/bsod-ntoskrnl-exe.1075182/
Relevancy 70.52%

Hey everyone my laptop has been crashing with the BSOD almost every five Ntoskrnl.exe BSOD minutes or so The errors are mostly IRQL LESS THEN OR Ntoskrnl.exe BSOD EQUAL or PAGE FAULT or many other errors This all started awhile ago the computer was crashing but still under warranty so i took it in but all they did was replace the hard drive and give it back So I was stuck reinstalling windows Needless to say the crashes continued and I'm pretty sure have gotten worse Looking at the dump files ntoskrnl exe was showing up as the cause many times but that does not seem to tell me enough to figure out what is wrong I tried to make sure that all of the drivers are installed and up to date I have ran memtest and chkdsk many times and they do not find any problems I'm not even sure why the hard drive was replaced in the first place because that was not the problem If anyone has any suggestions I am open to them I tried to run the application it says but the computer would crash too much so here it is as far as it could get

A:Ntoskrnl.exe BSOD

Hi welcome to the forum.
Due to the number of BSOD's this will be passed on for our Forum expert in these matters.I ask you please to be patient & someone will come along to help, when they are available.
Thank you.

http://www.vistax64.com/crashes-debugging/288966-ntoskrnl-exe-bsod.html
Relevancy 70.52%

I have beenn having several BSOD's a daY. It happens when my computer is idiling. I ran chkdsk and did a memory test for about an hour with no problems. I have attached the dump file. I would be grateful if you could
look at it. For the record this is a computer I built about a year ago.

A:ntoskrnl.exe BSOD

Hello t41310.

The crash is caused by Realtek RTL8168D/8111D Family PCI-E Gigabit Ethernet NIC driver.

Code:
Irp is active with 3 stacks 2 is current (= 0xfffffa8008e52128)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 e1 fffffa800834d050 00000000 fffff800032da200-fffffa8008518120 Success Error Cancel pending
Unable to load image \SystemRoot\system32\DRIVERS\Rt64win7.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for Rt64win7.sys
*** ERROR: Module load completed but symbols could not be loaded for Rt64win7.sys
\Driver\RTL8167 nt!PopSystemIrpCompletion
Args: 00012200 00000000 00000002 00000002
[ 0, 0] 0 0 00000000 00000000 00000000-fffffa8008518120

Args: 00000000 00000000 00000000 00000000
And the driver is old.

Code:
fffff880`0446a000 fffff880`044d4000 Rt64win7 T (no symbols)
Loaded symbol image file: Rt64win7.sys
Image path: \SystemRoot\system32\DRIVERS\Rt64win7.sys
Image name: Rt64win7.sys
Timestamp: Wed Jan 26 19:04:03 2011 (4D4022CB)
CheckSum: 0006AFBB
ImageSize: 0006A000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Update it from Realtek

There are reasons to suspect a malware.

Code:
fffff800`00b9c4f8 fffff880`00dc2830 ataport!IdePortTickHandler
fffff800`00b9c510 fffff880`00dc2830 ataport!IdePortTickHandler
Scan the system for possible virus infection.
Anti-rootkit utility TDSSKiller
Windows Defender Offline
On a serious note, hibernate or sleep is not needed for a desktop PCat all, as it runs on the external source of power and not on the battery. Dont worry to disable hibernate and sleep.
Hibernate - Enable or Disable

Free up the startup.
Click on the Start button
Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the “Startup” tab.
Deselect all items other than the antivirus.
Apply > OK
Accept then restart.
If possible, Plan to update the BIOS. Here's your current one .... what they calls Initial BIOS.

Code:
BiosVersion = 4.6.4
BiosReleaseDate = 09/07/2011
Take the update from BIOSTAR, dated 2012-09-17.
Let us know the results.

http://www.sevenforums.com/bsod-help-support/285708-ntoskrnl-exe-bsod.html
Relevancy 70.52%

Greetings Firstly thank you in Ntoskrnl.exe BSOD advance for any help I receive with my problems I am not exactly the most computer savvy person and these blue screens are beginning to get me worried I have attached the file created by the DM log collector as requested With regards to the BSOD I am unable to replicate exactly what causes the crash They are totally random from my pc being idle to watching video and gaming My error codes are mostly x d but I have also had x e x a and a few more However of the errors point to notoskrnl exe bc With the small amount of research my BSOD Ntoskrnl.exe tech knowledge can sustain Im in the understanding that it might be a corrupted driver somwhere so I ran SlimDrivers This came back with multiple BSOD Ntoskrnl.exe updated including pci usb chipsets and prosessor drivers Is it possible to run these updates without affecting my overclock Let me know BSOD Ntoskrnl.exe if any further information is needed Thanks again for any help Ken

A:BSOD Ntoskrnl.exe

Hi Ken,

You have dump files going back for a year, I just went through the last few and you are right about it being driver related.

We don't recommend using any driver programs since they can often give you incorrect drivers and are usually hard to get rid of what else they bring with them.

I see your display driver pointed to a couple times,

Two different versions as well,


Code:
0: kd> lmvm nvlddmkm
start end module name
fffff880`08465000 fffff880`08f4a000 nvlddmkm T (no symbols)
Loaded symbol image file: nvlddmkm.sys
Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
Image name: nvlddmkm.sys
Timestamp: Fri Jun 21 02:06:16 2013 (51C41788)
CheckSum: 00AB87FF
ImageSize: 00AE5000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

Code:
start end module name
fffff880`0f403000 fffff880`1005b000 nvlddmkm T (no symbols)
Loaded symbol image file: nvlddmkm.sys
Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
Image name: nvlddmkm.sys
Timestamp: Tue Mar 04 03:07:52 2014 (5315B408)
CheckSum: 00C20523
ImageSize: 00C58000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Try using a different driver,

NVIDIA DRIVERS GeForce 334.89 Driver WHQL

Do a clean install of the display driver.
Uninstall All nvidia items in Control Panel > Programs and features3D Vision Control Driver
3D Vision Driver
Graphics Driver
HD Audio Driver
PhysX
nvidia Update
(Are you using nvidia chipset drivers? If so, dont uninstall anything other than those are listed).
Now follow Drivers - Clean Left over Files after Uninstalling
Install the driver again. While installing, Select Custom (Advanced) install. In the next page, follow this settings:



This may help as well,

NVIDIA Drivers - Avoid Problems

I also see your usb3 driver being flagged,


Code:
fffff880`0706a000 fffff880`0712f000 iusb3xhc T (no symbols)
Loaded symbol image file: iusb3xhc.sys
Image path: \SystemRoot\system32\DRIVERS\iusb3xhc.sys
Image name: iusb3xhc.sys
Timestamp: Mon May 21 00:21:40 2012 (4FB9ED04)
CheckSum: 000CA061
ImageSize: 000C5000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
You can update that from here,

https://downloadcenter.intel.com/Det...?DwnldID=21129

Let us know how things go from there.

http://www.sevenforums.com/bsod-help-support/331416-bsod-ntoskrnl-exe.html
Relevancy 70.52%

My boss is using a computer for video editing with Premiere Pro CS for creation of commercials promo videos etc For the past few days he's been getting BSODs and all are pointing to ntoskrnl exe but that's just a general error from what I can tell It's not just during video editing either I tried reinstalling video card drivers because he reported an anomoly with it and when I went to use the check with ntoskrnl.exe BSOD for updates in the nvidia control panel it gave me an error so I did a clean install of the drivers It still BSOD'd once yesterday and BSOD with ntoskrnl.exe then this morning when I came in it had BSOD'd right before I got here and all it was doing overnight was uploading to an FTP I've got windows memory diagnostic running on it at the moment The standard test didnt reveal anything so I'm doing the extended From my initial searches though ntoskrnl exe is more of a software issue than hardware Please help I'm not sure what else to do from here EDIT I also ran sfc scannow but everything said it was okay

A:BSOD with ntoskrnl.exe

I would guess it's a problem related to your SSD-disk, try updating the firmware for it.

Edit: Also update the drivers for your Marvell disk controllers.

http://www.sevenforums.com/bsod-help-support/247192-bsod-ntoskrnl-exe.html
Relevancy 70.52%

Recently upgraded to Win and have been have once-daily BSOD Gateway LX - three months ntoskrnl.exe bsod old Two HDD in same machine same issue with both OEM disc upgraded from Vista Added HDD from an old XP machine formatted and clean installed Win Upgraded ntoskrnl.exe bsod to HIS Radeon card immediately after purchase Installed Whocrashed to analyze the crashdump files multiple duplicates of the following result Code On Sun PM your computer crashed This was likely caused by the following module ntoskrnl exe Bugcheck code x F x xFFFFFA xFFFFF B C xFFFFFA Error DRIVER POWER STATE FAILURE Dump file C Windows Minidump - - dmp file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System The crash took place in a standard Microsoft module Your system configuration may be incorrect possibly the culprit may be another driver on your system which cannot be identified at this time Two examples of the following result Code On Sun PM your computer crashed This was likely caused by the following module ntoskrnl exe Bugcheck code x A x F DD x x xFFFFF D CA Error IRQL GT ZERO AT SYSTEM SERVICE Dump file C Windows Minidump - - dmp file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System The crash took place in a standard Microsoft module Your system configuration may be incorrect possibly the culprit may be another driver on your system which cannot be identified at this time These bsod occur mostly when the machine is not in use with no applications running I decided to check whether the video card drivers were causing the problem ran the quot verify quot command on just the two ATI drivers Rebooted and found the machine now crashed immediately after completion of the boot process Removed the software and drivers for the video card physically removed the card No difference crashed immediately after completion of the boot process Reinstalled Win and am back to once daily crash I have added nothing to the machine except Firefox and Zone Alarm Also I have a LeCie firewire external HDD that used to be recognized but no longer

A:ntoskrnl.exe bsod

Hi -

"ntoskrnl.exe" = the Windows NT Kernel. It is the default blame for a BSOD probable cause.

Get rid of Zone-Alarm. It is notorious for causing BSODs.

The 0x9f (0x3,,,) bugcheck = driver in an inconsistent power state and blocking an IRP (I/O Request Packets ) for too long a time. Typically, I have found 3rd party firewalls involved in 0x9f crashes. Z/A fits this scenario perfectly.

Zone Alarm Removal --> http://server.iad.liveperson.net/hc/...97&action=view

Post Z/A removal, reset the Windows Firewall to its default settings -
START | type FirewallSettings.exe into the start search box | click on FirewallSettings.exe above | select the Advanced Tab | click on "Restore Defaults" | Click Apply, OK

I would recommend MS Security Essentials --> http://www.microsoft.com/Security_Essentials/

See if BSODs persist.

Regards. . .

jcgriff2

.

http://www.techsupportforum.com/forums/f299/ntoskrnl-exe-bsod-461685.html
Relevancy 70.52%

I have been receiving BSOD's for a while now. I went ahead and uninstalled Panda Security (one BSOD pointed to it) and all of the files along with it . Ran memtest86 and on the 9th pass it had one error. Does that mean it's a faulty module? Can you guys see if there's anything else I should be doing? I really appreciate the help.


Thanks
Andrew

A:ntoskrnl.exe bsod

Code:
BugCheck 1E, {ffffffffc0000005, fffff80002c83945, 0, ffffffffffffffff}

Probably caused by : ntkrnlmp.exe ( nt!ExpInterlockedPopEntrySListFault16+0 )

Followup: MachineOwner
---------

Code:
BugCheck 1000007E, {ffffffffc0000005, fffff80002c9cf5c, fffff880009a99d8, fffff880009a9230}

Probably caused by : memory_corruption ( nt!MmZeroPageThread+883 )

Followup: MachineOwner
---------

Code:
BugCheck 3B, {c0000005, fffff80002c88dc5, fffff880027fc9e0, 0}

Probably caused by : ntkrnlmp.exe ( nt!ExpInterlockedPopEntrySListFault16+0 )

Followup: MachineOwner
---------
Test your RAM modules for possible errors. How to Test and Diagnose RAM Issues with Memtest86+
Run memtest86+ for at least 8 consecutive passes.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

It it does not show any error, enable Driver Verifier to monitor the drivers. Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.



   Information
Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.



   Warning
Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.



   Tip

If you fail to get on the Desktop because of DV, Boot into Advanced Boot Options > Safe mode. Disable DV there. Now boot normally again, and try following the instruction of enabling DV again.
If you cannot boot in Safe mode too, do a System Restore to a point you made earlier.

Let us know the results, with the subsequent crash dumps, if any.
HP OEM on Asus

http://www.sevenforums.com/bsod-help-support/367488-ntoskrnl-exe-bsod.html
Relevancy 70.52%

This has happened several times on Win7 Pro. Notice that I am running two machines and the other ntoskrnl.exe file is dated in May while the machine in trouble is dated in March. I have attached several files.

A:BSOD ntoskrnl.exe

Hello cyclone3211.

A stop 0x9F caused by the realtek network driver is rare. Please let me understand one thing? Your onboard connection is Marvell Yukon, and you are using Realtek? Is it a card?

Anyway, the driver is kinda backdated.

Code:
fffff880`0547e000 fffff880`05545000 Rt64win7 T (no symbols)
Loaded symbol image file: Rt64win7.sys
Image path: Rt64win7.sys
Image name: Rt64win7.sys
Timestamp: Wed Dec 26 22:47:50 2012 (50DB313E)
CheckSum: 000CDEEE
ImageSize: 000C7000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Update it from Realtek

Also, uninstall SeriousBit NetBalancer Internet traffic control (nbdrv.sys) and Networx, at least as a try.

Moreover, it appears to be a desktop computer. So you can disable Sleep and hibernate. It will also help you to get rid of your issue.

Let us know the results.
_________________________________________________________________________
BSOD ANALYSIS:

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa8007ae4a10, fffff80000b9c518, fffffa800ccebcf0}

*** WARNING: Unable to verify timestamp for Rt64win7.sys
*** ERROR: Module load completed but symbols could not be loaded for Rt64win7.sys
Probably caused by : Rt64win7.sys

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

DRIVER_POWER_STATE_FAILURE (9f)
A driver has failed to complete a power IRP within a specific time (usually 10 minutes).
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: fffffa8007ae4a10, Physical Device Object of the stack
Arg3: fffff80000b9c518, nt!TRIAGE_9F_POWER on Win7, otherwise the Functional Device Object of the stack
Arg4: fffffa800ccebcf0, The blocked IRP

Debugging Details:
------------------
DRVPOWERSTATE_SUBCODE: 3

DEVICE_OBJECT: fffffa800869b050

DRIVER_OBJECT: fffffa800869f800

IMAGE_NAME: Rt64win7.sys

DEBUG_FLR_IMAGE_TIMESTAMP: 50db313e

MODULE_NAME: Rt64win7

FAULTING_MODULE: fffff8800547e000 Rt64win7

IRP_ADDRESS: fffffa800ccebcf0

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

BUGCHECK_STR: 0x9F

PROCESS_NAME: System

CURRENT_IRQL: 2

TAG_NOT_DEFINED_c000000f: FFFFF80000BA2FB0

STACK_TEXT:
fffff800`00b9c4c8 fffff800`0494d8c2 : 00000000`0000009f 00000000`00000003 fffffa80`07ae4a10 fffff800`00b9c518 : nt!KeBugCheckEx
fffff800`00b9c4d0 fffff800`048e884c : fffff800`00b9c600 fffff800`00b9c600 00000000`00000000 00000000`00000001 : nt! ?? ::FNODOBFM::`string'+0x33af0
fffff800`00b9c570 fffff800`048e86e6 : fffff800`04a8df20 00000000`000683b2 00000000`00000000 00000000`00000000 : nt!KiProcessTimerDpcTable+0x6c
fffff800`00b9c5e0 fffff800`048e85ce : 0000000f`88187094 fffff800`00b9cc58 00000000`000683b2 fffff800`04a5c8c8 : nt!KiProcessExpiredTimerList+0xc6
fffff800`00b9cc30 fffff800`048e83b7 : 00000004`ddd28fc1 00000004`000683b2 00000004`ddd28f17 00000000`000000b2 : nt!KiTimerExpiration+0x1be
fffff800`00b9ccd0 fffff800`048d590a : fffff800`04a58e80 fffff800`04a66cc0 00000000`00000002 fffff880`00000000 : nt!KiRetireDpcList+0x277
fffff800`00b9cd80 00000000`00000000 : fffff800`00b9d000 fffff800`00b97000 fffff800`00b9... Read more

http://www.sevenforums.com/bsod-help-support/299413-bsod-ntoskrnl-exe.html
Relevancy 70.52%

I have updated drivers, tried a different mouse as I read razer mouse's have caused BSOD's, tried a different powersupply, i'm stumped, still random when it crashes, but at least 1-2 times a night.
any help would be appreciated
edit:

some more info, never crashes while in an application ie: a game, always crashes at desktop or web browser, different sites, multiple times on youtube.

blue screen message is:

DPC_WATCHDOG_VIOLATION

A:BSOD, Hal.dll ntoskrnl.exe

Your crash dumps are not showing any finite probable cause. In such a situation, it is better to enable Driver Verifier to monitor the drivers.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

   Information
Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.
   Warning
Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.

   Tip


If you fail to get on the Desktop because of DV, Boot into Advanced Boot Options > Safe mode. Disable DV there. Now boot normally again, and try following the instruction of enabling DV again.If you cannot boot in Safe mode too, do a System Restore to a point you made earlier.
Let us know the results, with the subsequent crash dumps, if any.

http://www.eightforums.com/bsod-crashes-debugging/20979-bsod-hal-dll-ntoskrnl-exe.html
Relevancy 70.52%

I just built this PC with Windows 8 Pro but have been getting random BSODs (watchdog) that typically occur when the system has to restart after installing new software or drivers. BlueScreenView tells me that the problem files are hal.dll and ntoskrnl.exe (and usbport.sys in one other dump), but I'm not sure where to proceed from here. AFAIK, these are pretty generic 133 errors that may have to do with conflicting or incompatible drivers.

A:BSOD 133 (hal.dll and ntoskrnl.exe)

Bump. My system seems to be a lot more stable now, but a BSOD is guaranteed whenever I try to shut down or reboot the system, and it always involves hal.dll and ntoskrnl.exe.

http://www.eightforums.com/bsod-crashes-debugging/12805-bsod-133-hal-dll-ntoskrnl-exe.html
Relevancy 70.52%

Hello, I've been having some insane issues with BSOD lately. It doesn't seem to happen at any time in particular, just whenever it feels like it, it seems. I just installed a new Graphics card, and it's happened a few times since. Before the new card, I got just one BSOD-- but never knew to jot down the codes, and never knew what a minidump was....etc. I've attached my minidump folder for my last four BSOD's. Could you please help me to find out what is causing this?
 

Relevancy 70.52%

hopefully i provide enough information required ;((

A:BSOD on ntoskrnl.exe

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa8006a25a10, fffff80004c203d8, fffffa800cca3010}

Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : pci.sys

Followup: MachineOwner
-------------------------------------------------------------------------------
Irp is active with 4 stacks 2 is current (= 0xfffffa800cca3128)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 e1 fffffa8006a21e40 00000000 fffff88005b74c74-fffffa800aef8010 Success Error Cancel pending
\Driver\ACPI nvlddmkm
Args: 00000000 00000001 00000001 00000000
[ 16, 2] 0 e1 fffffa80097a3040 00000000 00000000-00000000 pending
\Driver\nvlddmkm
Args: 00000000 00000001 00000001 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-fffffa8008cf4c40

Args: 00000000 00000000 00000000 00000000
--------------------------------------------------------------------------------------------
Device object (fffffa80097a3040) is for:
InfoMask field not found for _OBJECT_HEADER at fffffa80097a3010
\Driver\nvlddmkm DriverObject fffffa80096841c0
Current Irp 00000000 RefCount 0 Type 00000023 Flags 00002004
DevExt fffffa80097a3190 DevObjExt fffffa80097a3b48
ExtensionFlags (0x00000800) DOE_DEFAULT_SD_PRESENT
Characteristics (0x00000100) FILE_DEVICE_SECURE_OPEN
AttachedTo (Lower) fffffa8006a21e40 \Driver\ACPI
Device queue is not busy.
Disablr PCIe link stat power management.
PCIe Link State Power Management - Turn On or Off in Windows

Now put the computer to sleep for some times and report us back if it is any more BSODs there or not.

http://www.sevenforums.com/bsod-help-support/296074-bsod-ntoskrnl-exe.html
Relevancy 70.52%

A few dumps this time. i was watching a video on youtube when this happened.

A:BSOD ntoskrnl.exe again

Check for heating issues using Speccy or HWmonitorHWMonitor CPUID - System & hardware benchmark, monitoring, reporting
Speccy - System Information - Free DownloadPlease upload a summary tab using Speccy. Screenshots and Files - Upload and Post in Seven Forums
Test and Diagnose RAM issues with MEMTEST86+Pay close attention to Part 3 of the tutorial "If you have errors". Take the test for at least 7-10 passes. It may take up to 22 passes to find problems.Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold. RAM - Test with Memtest86+
System File CheckerThe SFC /SCANNOW Command - System File Checker scans the integrity of all protected Windows 7 system files and replaces incorrect corrupted, changed/modified, or damaged versions with the correct versions if possible. If you have modified your system files as in theming explorer/system files, running sfc /scannow will revert the system files to it's default state.Link to full tutorial: SFC /SCANNOW Command - System File Checker
Run Disk Check in Windows 7Run this on your Hard Drive(s). This will show you how to run Check Disk or chkdsk in Windows 7 to check a selected hard disk for file system errors and bad sectors on it. With both boxes checked for all HDDs and with Automatically fix file system errors. Post back your logs for the checks after finding them using Check Disk (chkdsk) - Read Event Viewer LogLink to full tutorial: Disk Check
Virus Check:Make scans with these tools below:TDSSKiller Rootkit Removal Utility Free Download | Kaspersky Lab US
Online Virus Scanner Eset
Application conflict:Reduce the start-up items. This will help avoid software conflicts:Remove Startup Programs in Windows 7
Clean Startup in Windows 7

http://www.sevenforums.com/bsod-help-support/311356-bsod-ntoskrnl-exe-again.html
Relevancy 70.52%

BSOD started yesterday and happen most of the time when i used google chrome and when i ran a scan on MSE.

Windows 7 Ultimate 64 bit
MSI GX60
CPU:AMD A10-4600M
Graphic Card: AMD Radeon HD 7970M (2GB GDDR5)

Thank in advance and sorry for my bad grammar.

A:BSOD cause by ntoskrnl.exe

Hello Mistral.

Your crash dumps are not showing any finite probable cause.

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

If memtest comes free from errors, enable Driver Verifier to monitor the drivers.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.



   Information
Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.



   Warning
Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.



   Tip

If you fail to get on the Desktop because of DV, Boot into Advanced Boot Options > Safe mode. Disable DV there. Now boot normally again, and try following the instruction of enabling DV again.
If you cannot boot in Safe mode too, do a System Restore to a point you made earlier.

Let us know the results, with the subsequent crash dumps, if any.

Something is odd there .... about your BIOS date. We are having two different information about it.
One .... the date is 10/12/2012
The other ... the date is 10/12/2555
Have you done anything with the system date? If so, why? Let us know?

http://www.sevenforums.com/bsod-help-support/301480-bsod-cause-ntoskrnl-exe.html
Relevancy 70.52%

Hello I have windows and run into several BSOD I did not bother to do anything until now but it's starting to get extremely annoying because it happens of the time during playing League of Legends Here is a screenshot of the most recent dumpfiles Imgur The most awesome images on the Internet As you can see most of them are related to ntoskrnl exe but there are also more and ntoskrnl.exe BSOD: a few others I tried to update my drivers but I'm afraid some updates might have failed I forgot some but I do not know which Everything else has been running smoothly so far and I hope that my hardware is working which should be the case since I built the pc month ago and did not encounter any problems The bsod appera most often right after I loaded when the game is about to start or sometimes BSOD: ntoskrnl.exe and more randomly during the game When I run other OBS in the background it occurs more frequently but this is just based on my feeling and I did not count the frequency The BSOD tend to appear after having the computer BSOD: ntoskrnl.exe and more running for minutes and usually not in the first game but rather the nd or rd Thank you very much for your help and tell me if I can run another program screen to help you guys out with information

A:BSOD: ntoskrnl.exe and more

Please read BSOD Posting Instructions & How to upload files

http://www.tenforums.com/bsod-crashes-debugging/39939-bsod-ntoskrnl-exe-more.html
Relevancy 70.52%

Here are the dump files, I am not to sure how to recreate the problem, the only thing I know is that:
Windows starts to freeze, take a long time to move/copy files.
Couple minutes later, computer crashes and gets BSOD.

http://www.sevenforums.com/bsod-help-support/383635-bsod-ntoskrnl-exe.html
Relevancy 70.52%

Im getting blue screen every 35min here is full report..from bluescreen view

Caused By Driver - ntoskrnl.exe, Caused By Address - ntoskrnl.exe+71f00

File Description - NT Kernel & System, File Version 6.1.7601.17514 (win7sp1_rtm.101119-1850)

Full Path C:\Windows\Minidump\020112-5850-01.dmp

Crash Address - ntoskrnl.exe+71f00

A:BSOD ntoskrnl.exe?

Please follow http://www.sevenforums.com/crashes-d...tructions.html and post up the crash files so we can properly determine the problem.

http://www.sevenforums.com/bsod-help-support/241806-bsod-ntoskrnl-exe.html
Relevancy 70.52%

Hey guys Recently got my new computer and it is amazing Only problem is that or times a day i get a BSOD I checked the Minidump files and it's saying something about VISTA DRIVER FAULT and ntoskrnl exe driver fault This is what the Dump File reads Code Loading Dump File C Users Nico Desktop - - dmp Mini Kernel Dump File Only registers and stack trace are available Symbol search path is Invalid Symbol loading may be unreliable without a symbol search path Use symfix to have the debugger BSOD ntoskrnl.exe? - choose a symbol path After setting your symbol path use reload to refresh symbol locations Executable search path is Symbols can not be loaded because symbol path BSOD - ntoskrnl.exe? is not initialized The Symbol Path can be BSOD - ntoskrnl.exe? set by using the NT SYMBOL PATH environment variable using the -y lt symbol path gt argument when starting the debugger using sympath BSOD - ntoskrnl.exe? and sympath Unable to load image SystemRoot system ntoskrnl exe Win error n WARNING Unable to verify timestamp for ntoskrnl exe ERROR Module load completed but symbols could not be loaded for ntoskrnl exe Windows Kernel Version MP procs Free x Product WinNt suite TerminalServer SingleUserTS Personal Built by amd fre win gdr - Machine Name Kernel base xfffff a e PsLoadedModuleList xfffff c be Debug session time Sat Oct UTC System Uptime days Symbols can not be loaded because symbol path is not initialized The Symbol Path can be set by using the NT SYMBOL PATH environment variable using the -y lt symbol path gt argument when starting the debugger using sympath and sympath Unable to load image SystemRoot system ntoskrnl exe Win error n WARNING Unable to verify timestamp for ntoskrnl exe ERROR Module load completed but symbols could not be loaded for ntoskrnl exe Loading Kernel Symbols Loading User Symbols Loading unloaded module list Bugcheck Analysis Use analyze -v to get detailed debugging information BugCheck A b fffff a ddaa Kernel symbols are WRONG Please fix symbols to do analysis Your debugger is not using the correct symbols In order for this command to work properly your symbol path must point to pdb files that have full type information Certain pdb files such as the public OS symbols do not contain the required information Contact the group that provided you with these symbols if you need this command to work Type referenced nt KPRCB Your debugger is not using the correct symbols In order for this command to work properly your symbol path must point to pdb files that have full type information Certain pdb files such as the public OS symbols do not contain the required information Contact the group that provided you with these symbols if you need this command to work Type referenced nt KPRCB Your debugger is not using the correct symbols In order for this command to work properly your symbol path must point to pdb files that have full type information Certain pdb files such as the public OS symbols do not contain the required information Contact the group that provided you with these symbols if you need this command to work Type referenced nt KPRCB Probably caused by ntoskrnl exe nt fdaa Followup MachineOwner --------- kd gt analyze -v Bugcheck Analysis IRQL NOT LESS OR EQUAL a An attempt was made to access a pageable or completely invalid address at an interrupt request level IRQL that is too high This is usually caused by drivers using improper addresses If a kernel debugger is available get the stack backtrace Arguments Arg b memory referenced Arg IRQL Arg bitfield bit value read operation write operation bit value not an execute operation execute operation only on chips which support this level of status Arg fffff a ddaa address which referenced memory Debugging Details ------------------ Kernel symbols are WRONG Please fix symbols to do analysis Your debugger is not using the correct symbols In order for this command to work properly your symbol path must point to pdb files that have full type information Certain pdb fi... Read more

A:BSOD - ntoskrnl.exe?

ignore the ntoskrnl.exe its most likely a symptom not a cause and concentrate on the irq not less equal interrupt error , 99% of the time this is caused by graphics drivers so start there update to the latest , if you have the latest install the last set , reinstall your chipset drivers (mobo or chipset manufacturer will have them get the latest version not the version you were supplied with) soundcard drivers infact reinstall every driver you can think of .

remove and uninstall any unessasary hardware like printers usb devices etc until you can trace the faulting driver

http://www.sevenforums.com/drivers/115486-bsod-ntoskrnl-exe.html
Relevancy 70.52%

Hi guys,
I just built my computer about a month ago and I've been getting these BSOD that always have to do with the ntoskrnl.exe. I tried to search around for a solution and I think I narrowed it down to either a Ram or graphic card problem. Can anyone take a look at my minidump and help me to pinpoint the exact cause so I can know which hardware to replace? thanks =)

A:BSOD ntoskrnl.exe

  
Quote: Originally Posted by killersheep


Hi guys,
I just built my computer about a month ago and I've been getting these BSOD that always have to do with the ntoskrnl.exe. I tried to search around for a solution and I think I narrowed it down to either a Ram or graphic card problem. Can anyone take a look at my minidump and help me to pinpoint the exact cause so I can know which hardware to replace? thanks =)

Attachment 114430



Sorry but getting file not found on the attachment try again.

http://www.sevenforums.com/bsod-help-support/125013-bsod-ntoskrnl-exe.html
Relevancy 70.52%

Hi all,
My computer sometime gets BSOD ! I've tried to do some fixes but could not solve. Please take a look on the attachment and give me some advices !

A:BSOD - ntoskrnl.exe

Hiya and welcome to SevenForums!

Code:
BugCheck 74, {2, fffff8800321b9e0, 2, ffffffffc000014d}

Probably caused by : ntkrnlmp.exe ( nt!CmpLoadHiveThread+23a )
I hate to say this but you need to re-install Windows, 0x74's is bad system info, so re-install Windows and report back.

http://www.sevenforums.com/bsod-help-support/378241-bsod-ntoskrnl-exe.html
Relevancy 70.52%

I have been BSoD ntoskrnl getting multiple BSoD on windows since the released BSoD ntoskrnl version came out had little to no issue with tech previews Here are BSoD ntoskrnl the steps I did to try and solve my issues sfc scannow dism dism online cleanup-image restorehealth updated drivers manually memtest tried one stick of memory at a time in different ports ran Driver Verifier contacted microsoft o help from them now here's what pisses me off reinstalled windows wiped hard drive started from scratch and I am still getting the errors at this point I have no clue what's wrong any thoughts Edit forgot to add this info Is the OS is full retail version Approximate age of system hardware everything is custom built I'd say the oldest parts are up to years newest a year Approximate age of OS installation if you know Have you re-installed the OS yes CPU fx Video Card r MotherBoard if NOT a laptop ASrock performance Power Supply - brand amp wattage if NOT a laptop corsair GS Laptop or Desktop desktop

http://www.techsupportforum.com/forums/f299/bsod-ntoskrnl-1044305.html
Relevancy 70.52%

Hi guys Sadly I have ntoskrnl.exe [BSOD] to begin on [BSOD] ntoskrnl.exe this forum with a problem that I hope you'll be able to help me with Since my installation of Windows I have some BSOD caused by ntoskrnl exe It happens randomly and it can happen more than once a day It's really annoying cause it always happen in the worst time possible I don't really want to format again and maybe still have this problem So there is my setting -Windows Ultimate edition not an upgrade -nVidian GeForce GTS with drivers up-to-date -Asus [BSOD] ntoskrnl.exe P Q Deluxe up-to-date My antivirus is NOD I have ZoneAlarm as Firewall I also have Malwarebyte's Anti-Malware as Anti-Malware I read my minidump files with a program called quot WhoCrashed quot and all my BSOD were caused by quot ntoskrnl exe quot If you guys need my Minidump files just tell me how to send em please I hope you'll be able to help me fix those annoying crashes Thanks Ssooz

A:[BSOD] ntoskrnl.exe

  
Quote: Originally Posted by Ssooz


Hi guys,
Sadly I have to begin on this forum with a problem that I hope you'll be able to help me with.

Since my installation of Windows 7, I have some BSOD caused by ntoskrnl.exe. It happens randomly and it can happen more than once a day. It's really annoying cause it always happen in the worst time possible. I don't really want to format again and maybe still have this problem.

So there is my setting:

-Windows 7 Ultimate edition (not an upgrade)
-nVidian GeForce 8800GTS (with drivers up-to-date)
-Asus P5Q Deluxe (up-to-date)

My antivirus is NOD32, I have ZoneAlarm as Firewall. I also have Malwarebyte's Anti-Malware as Anti-Malware.

I read my minidump files with a program called "WhoCrashed" and all my BSOD were caused by "ntoskrnl.exe".

If you guys need my Minidump files, just tell me how to send em please. ^_^

I hope you'll be able to help me fix those annoying crashes.

Thanks,
Ssooz.


Dont worry we will figure it out. can you use this to find the DMP and upload it to us? http://www.sevenforums.com/crash-loc...d-problem.html

thanks

Ken

http://www.sevenforums.com/bsod-help-support/67461-bsod-ntoskrnl-exe.html
Relevancy 70.52%

Sorry, i haven't noticed where i was. Got 4 BSOD with

the last i got) IRQL_NOT_LESS_OR_EQUAL with ntoskrnl.exe+7fd00

SYSTEM_SERVICE_EXCEPTION ntoskrnl.exe+6f840

MEMORY_MANAGEMENT ntoskrnl.exe+71f00

The first) MEMORY_MANAGEMENT ntoskrnl.exe+71f00

Don't have any ideas on the cause, tjis is a new computer

Thanks for your help

A:BSOD with ntoskrnl

The last one arrived while windows update was running.

Thanka

http://www.sevenforums.com/bsod-help-support/376765-bsod-ntoskrnl.html
Relevancy 70.52%

Hiya, I've been getting this annoying BSoD everytime I play Battlefield: Bad Company 2 or Battlefield 3. It says it's caused by ntoskrnl.exe.

There's a workaround; If I uninstall my Audio Drivers and reboot and then start Battlefield, I can play until I close the game. If I start it again after that, I can only play for like 30-45 Minutes and then I get a BSoD.

It also only happens with Multiplayer. I've tried different Drivers.

It's RealTek On-Board.

I've uploaded the Dump file in a .rar archive, I'd really appreciate any kind of help!

A:ntoskrnl.exe BSoD(BF:BC2/BF3)

Just tried running with the Driver Verifier, and it gives me a BSoD when I try to reboot, it works if I enter failsafe mode, though.

I've uploaded a new Dump file with this reply.

http://www.techsupportforum.com/forums/f299/ntoskrnl-exe-bsod-bf-bc2-bf3-611266.html
Relevancy 70.52%

Hello I'm following this forum for a while and BSOD ntoskrnl.exe was seeking for solutions for my problem Somehow i've tryied verifier and worked but today i have experienced another BSODS Again But it happens when i'm playing Guild Wars Happened to me like or times when i was playing and when the pc reboots sometimes it appear again the BSOD with this ntoskrnl exe I already opened up my pc and cleaned swap Mem Ram cleaned the Graphics Card and started to happen again I've used the program called Whocrashed for infos System Information local -------------------------------------------------------------------------------- computer name AQUASH-PC windows version Windows build windows dir C Windows CPU AuthenticAMD AMD A - APU with Radeon tm HD Graphics AMD level BSOD ntoskrnl.exe logical processors active mask RAM total VM free and the BSOD Crash Dump Analysis -------------------------------------------------------------------------------- Crash dump directory C Windows Minidump Crash dumps are enabled on your computer On Mon GMT your computer crashed crash dump file C Windows Minidump - - dmp This was probably caused by the following module ntoskrnl exe nt x C Bugcheck code x xFFFFF B FA x xFFFFF B FA x Error PAGE FAULT IN NONPAGED AREA file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System Bug check description This indicates that invalid system memory has been referenced This appears to be a typical software driver bug and is not likely to be caused by a hardware problem The crash took place in the Windows kernel Possibly this problem is caused by another driver that cannot be identified at this time -------------------------------------------------------------------------- On Mon GMT your computer crashed crash dump file C Windows memory dmp This was probably caused by the following module ntkrnlmp exe nt KeBugCheckEx x Bugcheck code x xFFFFF B FA x xFFFFF B FA x Error PAGE FAULT IN NONPAGED AREA Bug check description This indicates that invalid system memory has been referenced This appears to be a typical software driver bug and is not likely to be caused by a hardware problem The crash took place in the Windows kernel Possibly this problem is caused by another driver that cannot be identified at this time -------------------------------------------------------------------------- On Mon GMT your computer crashed crash dump file C Windows Minidump - - dmp This was probably caused by the following module ntoskrnl exe nt x C Bugcheck code xA xFFFFFA x x xFFFFF EAE Error IRQL NOT LESS OR EQUAL file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System Bug check description This indicates that Microsoft Windows or a kernel-mode driver accessed paged memory at DISPATCH LEVEL or above This appears to be a typical software driver bug and is not likely to be caused by a hardware problem The crash took place in the Windows kernel Possibly this problem is caused by another driver that cannot be identified at this time That's the three last BSODS i've experienced I used that program from jcgriff and attached the zip file just to more infos BTW my Graphic Card are full updated i checked on mother board website and there was no update too Thanks for any help you guys can give to me and if there is anything missing please tell me

A:BSOD ntoskrnl.exe

Your crash reports indicate a possible problem with your Windows installation. Please download and run the MGA Diag Tool. When it finishes, hit the copy button, and paste in your next post with [code]<MGADiag info>[/code] surrounding the MGADiag info.



-----

http://www.techsupportforum.com/forums/f299/bsod-ntoskrnl-exe-679200.html
Relevancy 70.52%

Hi Folks
Any help with the following will be greatly appreciated. We get random BSOD which to my untrained eye seem to relate back to ntoskrnl.exe. Unfortunately the problem is not consistant in that we cannot cause the BSOD and hence finding a solution has been difficult.

Memmory diagnostics has run overnight with no problem all drivers are up to date is there anything else I can do before my Husband tries a reinstall of the OS

A:Ntoskrnl bsod

  
Quote: Originally Posted by sharonross


Hi Folks
Any help with the following will be greatly appreciated. We get random BSOD which to my untrained eye seem to relate back to ntoskrnl.exe. Unfortunately the problem is not consistant in that we cannot cause the BSOD and hence finding a solution has been difficult.

Memmory diagnostics has run overnight with no problem all drivers are up to date is there anything else I can do before my Husband tries a reinstall of the OS



Almost universally blamed on memory management
Memory corruption probably caused by a driver. please run these two tests

1-Memtest.

*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program.

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

RAM - Test with Memtest86+

2-Driver verifier






Quote:
I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.


Driver Verifier - Enable and Disable

http://www.sevenforums.com/bsod-help-support/182008-ntoskrnl-bsod.html
Relevancy 70.52%

? OS - Vista/ Windows 7 ? Windows 7
? x86 (32-bit) or x64 ? 64
? What was original installed OS on system? none
? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)? full retail
? Age of system (hardware) one year
? Age of OS installation - have you re-installed the OS? last install one month ago

? CPU Intel Core i5-2500 3.3 GHz 4 Cores
? Video Card Ati Radeon HD 5850
? MotherBoard Asus P
? Power Supply - brand & wattage no name 500W

? System Manufacturer selfbuilt
? Exact model number (if laptop, check label on bottom) not aviable

A:BSOD - ntoskrnl.exe

Quote:





Originally Posted by moehre


? OS - Vista/ Windows 7 ? Windows 7
? x86 (32-bit) or x64 ? 64
? What was original installed OS on system? none
? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)? full retail
? Age of system (hardware) one year
? Age of OS installation - have you re-installed the OS? last install one month ago

? CPU Intel Core i5-2500 3.3 GHz 4 Cores
? Video Card Ati Radeon HD 5850
? MotherBoard Asus P8P67
? Power Supply - brand & wattage no name 500W

? System Manufacturer selfbuilt
? Exact model number (if laptop, check label on bottom) not aviable

http://www.techsupportforum.com/forums/f299/bsod-ntoskrnl-exe-633919.html
Relevancy 70.52%

I would appreciate if anyone could help me with the following problem. First, here are my details;x64.
Retail.
My notebook is a Thinkpad T400, 2.5 years old.
I have been running this install for approx. 5 months.

My notebook is crashing whenever it enters into sleep mode (hibernation doesn't cause the same problem). Occasionally it will also hang when shutting down, lasting for 15 minutes until if finally crashes and reboots.

I've updated everything that I could from Microsoft and Lenovo, and I can't otherwise find out what the problem is.

I'd appreciate any help, thanks.

A:Bsod, ntoskrnl

  
Quote: Originally Posted by Gener8tor


I would appreciate if anyone could help me with the following problem. First, here are my details;x64.
Retail.
My notebook is a Thinkpad T400, 2.5 years old.
I have been running this install for approx. 5 months.

My notebook is crashing whenever it enters into sleep mode (hibernation doesn't cause the same problem). Occasionally it will also hang when shutting down, lasting for 15 minutes until if finally crashes and reboots.

I've updated everything that I could from Microsoft and Lenovo, and I can't otherwise find out what the problem is.

I'd appreciate any help, thanks.



Most recent crash caused by your storage driver iastor.sys

I would re-install newest version

Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\K\Desktop\Windows_NT6_BSOD_jcgriff2\020511-27253-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols;srv*e:\symbols
*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Machine Name:
Kernel base = 0xfffff800`02c5d000 PsLoadedModuleList = 0xfffff800`02e9ae50
Debug session time: Sat Feb 5 22:11:31.579 2011 (GMT-5)
System Uptime: 0 days 11:59:41.872
Loading Kernel Symbols
...............................................................
................................................................
............................................
Loading User Symbols
Loading unloaded module list
.........
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1000009F, {4, 258, fffffa8004df4040, fffff80000b9c510}

Unable to load image \SystemRoot\system32\DRIVERS\iaStor.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for iaStor.sys
*** ERROR: Module load completed but symbols could not be loaded for iaStor.sys
Probably caused by : iaStor.sys ( iaStor+50c28 )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

DRIVER_POWER_STATE_FAILURE (9f)
A driver is causing an inconsistent power state.
Arguments:
Arg1: 0000000000000004, The power transition timed out waiting to synchronize with the Pnp
subsystem.
Arg2: 0000000000000258, Timeout in seconds.
Arg3: fffffa8004df4040, The thread currently holding on to the Pnp lock.
Arg4: fffff80000b9c510

Debugging Details:
------------------
DRVPOWERSTATE_SUBCODE: 4

FAULTING_THREAD: fffffa8004df4040

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

BUGCHECK_STR: 0x9F

PROCESS_NAME: System

CURRENT_IRQL: 2

LAST_CONTROL_TRANSFER: from fffff80002cd4992 to fffff80002cd35da

STACK_TEXT:
fffff880`08b4a470 fffff800`02cd4992 : fffffa80`04df4040 fffffa80`04df4040 00000000`00000000 00000000`00000000 : nt!KiSwapContext+0x7a
fffff880`08b4a5b0 fffff800`02cd6cff : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiCommitThreadWait+0x1d2
fffff880`08b4a640 fffff800`0... Read more

http://www.sevenforums.com/bsod-help-support/142948-bsod-ntoskrnl.html
Relevancy 70.52%

Hi This is my help! - - BSOD ntoskrnl.exe first ever request here I'm a tech-illiterate who in most cases can manage it all via googling but now I've just hit a wall Please help I get randomly timed blue screens on my Acer Aspire Z laptop running XP Home Intel Pentium Dual BSOD - ntoskrnl.exe - help! CPU T GHz GB RAM Until recently when I integrated it with a router I used the machine very sporadically and offline only without issues A few days ago I got some automatic BSOD - ntoskrnl.exe - help! updates installed namely Microsoft NET Framework Microsoft NET Framework SP Microsoft NET Framework SP MSXML Service Pack KB Microsoft NET Framework SP Windows XP Service Pack It just felt too much of a good thing and indeed blue screens started in a matter of hours What I suspect having some extra involvement in all this a thing called Microsoft Kernel-Mode Driver Framework Feature Pack also installed automatically the day the blue screens started A program called BlueScreenView tells me that the first blue message went like this quot The problem seems to be caused by the following file ntoskrnl exe BAD POOL CALLER quot quot Technical Information STOP x c x x cd x x f ntoskrnl exe - Address x a base at x d DateStamp x b ea c quot The system logged the event as being of Category ID Subsequent blue screens were about quot PAGE FAULT IN NONPAGED AREA quot with the same possible source of the problem ntoskrnl exe quot Technical Information STOP x xbad b x x d x ntoskrnl exe - Address x a base at x d DateStamp x b ea c quot System log Category Event ID Following some recommendations found on the web I did a memory test with the Windows Memory Diagnostic Tool which found everything in order then I reset the system to the last good configuration which did nothing to stop the problem except the blue screen text now goes like this quot The problem seems to be caused by the following file PAGE FAULT IN NONPAGED AREA quot quot Technical Information STOP x xbad b x x d x - Address xa bae base at xa DateStamp x quot I also tried restoring the system to a date previous to the Microsoft downloads but I was told there's nothing to restore because nothing had been modified Which may make sense somehow only not for me since I can see all that service packs installed On a side note I have just observed that the system log has been from times immemorial trying to warn me that quot The following boot-start or system-start driver s failed to load KLIF quot Event ID no category Which thing seems to be connected to some Kaspersky stuff which strangely enough I never had on this machine Some advice as to what should I do would be very much aprreciated

A:BSOD - ntoskrnl.exe - help!

Sixty views and nobody cares to say a word? I'm slightly disappointed in this forum.

http://www.techsupportforum.com/forums/f10/bsod-ntoskrnl-exe-help-471052.html
Relevancy 70.52%

Hello there sevenforums experts.
I have recently build my custom PC and stuff hasnt been doing great lately
i keep getting BSOD multiple times for the last 1 week, one day it can occur more than 5x.
it resulted in my 1TB Western Digital Harddisc to be corrupted and unusable
my Specs are
--------
Motherboard : Gigabyte z97Gaming3
CPU : Intel i5 4440
GPU : Asus GTX 750Ti
Ram : Kingston Hyperx Fury 8Gb

-------

thank you very much

A:BSOD 3b NTOSKRNL

Hi Merepoix.

Install Service pack 1 and all other windows updates. Otherwise the system will remain vulnerable to threats including BSODs stop 0x3B.

Code:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Learn how to install Windows 7 Service Pack 1 (SP1)
Service Pack and Update Center - Microsoft Windows

Report us for any further BSOD after installing Service pack 1.
___________________________________

Code:
BugCheck 3B, {c0000005, fffff80001e9701e, fffff8801d777de0, 0}

Probably caused by : ntkrnlmp.exe ( nt!ExEnterCriticalRegionAndAcquireFastMutexUnsafe+26 )

Followup: MachineOwner
---------

http://www.sevenforums.com/bsod-help-support/363269-bsod-3b-ntoskrnl.html
Relevancy 70.52%

hey,

I just installed Windows Ultimate 64bit on my PC.
But from time to time I got a BSOD, this is a new fresh/clean install.
The only thing I have done is updating drivers and windows updates.

I do have one windows update that won't install: KB2621440 code 800B0100

Thanks in advance.

Zyon1989

A:BSOD - ntoskrnl.exe

Update:

I uninstalled Daemon Tools, and run some tests:

Memtest86: I tested my 2 rams separately both in the 2 slots they were located, all passed up to 9 tests without any errors
SFC/ Scannow: no errors, all fine
Shckdsk: in step 4 it replaced 2 files: replaced bad clusters in file ...
Prime95: could not start the blend test, hardware error occurred

So now im posting the new files from the diagnostic here, if anything changed?

http://www.sevenforums.com/bsod-help-support/248091-bsod-ntoskrnl-exe.html
Relevancy 70.52%

Hi guys,
My laptop crashes showing this BSOD, sometimes it is so frequent may reach 5 times/day
sometimes the day passes clearly
Sometimes during browsing and working on it, sometimes when I leave it free/on lockscreen !!

Driver_Power_State_Failure.


I used a tool and detected that the problem is related to something called "Ntoskrnl"

This is the debug file.

http://tinyurl.com/lzf6shh
Copy the link in a new tab,
Sorry, don't know what is the problem with mediafire, and couldn't upload via attachments !

Thank you

A:BSOD, Ntoskrnl.

aaargh I just posted the same problem... I hope someone will get to us some link or ...I dont know something to fix this..

http://www.eightforums.com/bsod-crashes-debugging/54884-bsod-ntoskrnl.html
Relevancy 70.52%

hi bleeping computer, i'm a new member here coz i was so desperate not having my pc fixed from BSOD.
 
it happened after i upgrade from win 7 to win 8, cause i dont have much expertise in this thing, i'm hoping i could get some solution from BC expert
 
looking forward to get some feedback regarding this issue, i'm so grateful found this site after all
 
thanks in advance
 
Ryan

A:various BSOD with ntoskrnl.exe

sorry i forgot to list my pc spec here
mobo : asus m4a89gtd
amd phenom II x6 1055t
apotop 1x4gb RAM
nvidia gforce 8600 gt
 
thanks

http://www.bleepingcomputer.com/forums/t/515865/various-bsod-with-ntoskrnlexe/
Relevancy 70.52%

Hi Guys,

I have had 6 BSOD's over the last two days when I look up screen view the area of the crashes is nearly always. They only really started to occur after I updated to SP1. I updated my drivers 2 days ago and the crashes are less frequent I have attached Blu screen view txt files also. Any help on this would be greatly appreciated.

ntoskrnl.exe+7fd00

Specs
WIN7 X 64
AMD Phenom ii x 4 840 3.2ghz.
4gb Kingston blu ram 1600mhz (2x2gb)
1.5 tb HDD
OEM OS with SP1 updated.

A:BSOD's in ntoskrnl

There's several possibilities here, but I notice you have avg I have seen similar behavior from avg after installing SP1 before.
If it is the cause simply removing it, and reinstalling it fresh should fix it.


Code:
Probably caused by : NETIO.SYS ( NETIO!NsiEnumerateObjectsAllParametersEx+24f )

Followup: MachineOwner
---------

2: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arguments:
Arg1: fffff88008de84f0, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, value 0 = read operation, 1 = write operation
Arg4: fffff880016771af, address which referenced memory

Debugging Details:
------------------
WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff80002abb100
fffff88008de84f0

CURRENT_IRQL: 2

FAULTING_IP:
ndis!ndisReferenceTopMiniportByNameForNsi+ef
fffff880`016771af 88842490000000 mov byte ptr [rsp+90h],al

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

BUGCHECK_STR: 0xD1

PROCESS_NAME: svchost.exe

TRAP_FRAME: fffff88008de72d0 -- (.trap 0xfffff88008de72d0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000002 rbx=0000000000000000 rcx=fffffa8004d86198
rdx=0000000000000002 rsi=0000000000000000 rdi=0000000000000000
rip=fffff880016771af rsp=fffff88008de7460 rbp=0000000000000002
r8=0000000000000000 r9=0000000000000000 r10=0000000000000000
r11=0000000000000002 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei ng nz na po nc
ndis!ndisReferenceTopMiniportByNameForNsi+0xef:
fffff880`016771af 88842490000000 mov byte ptr [rsp+90h],al ss:0018:fffff880`08de74f0=02
Resetting default scope

LAST_CONTROL_TRANSFER: from fffff8000288b2a9 to fffff8000288bd00

STACK_TEXT:
fffff880`08de7188 fffff800`0288b2a9 : 00000000`0000000a fffff880`08de84f0 00000000`00000002 00000000`00000001 : nt!KeBugCheckEx
fffff880`08de7190 fffff800`02889f20 : 00000000`00000001 00000000`00000000 fffff8a0`018c5060 fffffa80`04d0d1a0 : nt!KiBugCheckDispatch+0x69
fffff880`08de72d0 fffff880`016771af : fffffa80`04d86198 fffff800`028a6a62 00000000`80200020 00000000`00000001 : nt!KiPageFault+0x260
fffff880`08de7460 fffff880`01678c17 : fffffa80`044603b8 00000000`00000000 00000000`00000002 fffffa80`04460100 : ndis!ndisReferenceTopMiniportByNameForNsi+0xef
fffff880`08de74e0 fffff880`01767aab : 00000000`00000000 fffffa80`00000008 00000000`00000290 fffffa80`00000238 : ndis!ndisNsiEnumerateAllInterfaceInformation+0x1e8
fffff880`08de75d0 fffff880`04a9de29 : fffffa80`04460000 fffff8a0`00000070 fffffa80`04a0cfb0 00000000`01b0f550 : NETIO!NsiEnumerateObjectsAllParametersEx+0x24f
fffff880`08de77b0 fffff880`04a9f8e8 : fffffa80`04a0cfb0 fffffa80`04a0cee0 00000000`00000003 fffffa80`04a0cf18 : nsiproxy!NsippEnumerateObjectsAllParameters+0x305
fffff880`08de79a0 fffff880`04a9f9db : fffffa80`04d80bc0 00000000`00000000 00000000`00000001 00000000`00000003 : nsiproxy!NsippDispatchDeviceControl+0x70
fffff880`08de79e0 fffff800`02ba6127 : fffffa80`06639320 fffffa80`06639320 fffffa80`04a0cff8 fffffa80`04a0cee0 : nsiproxy!NsippDispatch+0x4b
fffff880`08de7a10 fffff800`02ba6986 : 00000000`01b0f3d0 00000000`0000059c 00000000`00000000 00000000`00000000 : nt!IopXxxControlFile+0x607
fffff880`08de7b40 fffff800`0288af93 : fffffa80`05de9060 00000000`01b0f3b8 fffff88... Read more

http://www.sevenforums.com/bsod-help-support/179372-bsods-ntoskrnl.html
Relevancy 70.52%

I'm have crashs 1-3 times a day and I'm getting a 0x19,0x1e,0x7f,0x50,0x4E,0x4E,0x3b,0a reasons for crash so can't figure out what is wrong. HP all the tell me is to restore but that is a real pain and then I don't I still don't know what is wrong.

A:BSOD ntoskrnl

  
Quote: Originally Posted by gjrewerts


I'm have crashs 1-3 times a day and I'm getting a 0x19,0x1e,0x7f,0x50,0x4E,0x4E,0x3b,0a reasons for crash so can't figure out what is wrong. HP all the tell me is to restore but that is a real pain and then I don't I still don't know what is wrong.


These crashes were caused by memory corruption (probably a driver). Please run these two tests to verify your memory and find which driver is causing the problem.

If you are overclocking anything reset to default before running these tests.
In other words STOP!!!
1-Memtest.





Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.



RAM - Test with Memtest86+

2-Driver verifier






Quote:
Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.


Driver Verifier - Enable and Disable
Further Reading
Using Driver Verifier to identify issues with Windows drivers for advanced users

http://www.sevenforums.com/bsod-help-support/207009-bsod-ntoskrnl.html
Relevancy 70.52%

Hi everyone So I recently bought a new laptop within the last month or so Its the new line of Asus ROG gaming i GB RAM GTX Windows TB HDD I've been getting BSODs after playing games such as Batman Arkham Orgins and Borderlands During the game everything runs smoothly at near max settings However when I exit the game my laptop begins to act strange Programs won't open and it slows down Then within seconds the computer will BSOD I had the same program on my old computer but after updating some drivers I never had the problem again I tried to do the same but at this point it can't really be ignored The only ntoskrnl.exe BSOD game that has so far worked flawlessly has been League of Legends I am able to seamlessly transition in an out of multiple LoL games without any BSODs On a side note I do not ntoskrnl.exe BSOD have AVG installed I've seen this as a common tip when someone brings up this error Also I believe there is a Driver Verifier BSOD within the attachment That was just me trying to figure out the BSOD and messed up my computer in the process I booted in safe mode and managed to sort that one out Although if anything still seems out of whack from me doing that I would greatly appreciate it if you let me know Thanks for your help in advance

A:ntoskrnl.exe BSOD

While this driver shows up in a lot of memory dumps and isn't to blame, one of your memory dumps (and it's a verifier enabled memory dump) does blame the nVidia Streaming Kernel Service driver. Also, several of the other memory dumps also point to video driver issues. Please do this:





From a previous post of mine (located here: BSOD at startup and lid closed DPC Watchdog ):




..... NvStreamKms.sys - an nVidia driver that belongs to the nVidia Streaming Kernel service.
Check this post out for a possible fix: https://forums.geforce.com/default/t...ezing-your-pc/
Or, you may want to uninstall the nVidia drivers and then install a fresh copy without the Streaming Kernel Service (I'm not familiar with nVidia drivers, so I don't even know if this is possible).







Please try to update these older drivers. Asus may not have updated versions for your system - if so, just let us know. DO NOT manually delete/rename the driver as it may make the system unbootable! :

ASMMAP64.sys Thu Jul 2 05:13:26 2009 (4A4C7A36)
LENOVO ATK Hotkey ATK0101 ACPI UTILITY (also found in Asus systems)
http://www.carrona.org/drivers/driver.php?id=ASMMAP64.sys

AiCharger.sys Thu Sep 22 22:04:40 2011 (4E7BE938)
Asus Charger Driver [br] Likely BSOD cause - haven't seen recently (15Jan2013)
http://www.carrona.org/drivers/driver.php?id=AiCharger.sys

Please note the drivers below that date from before the release of Windows 8.1 (17 Oct 2013) - check to see that each and every one is compatible w/Windows 8.1 (at the manufacturer's website). If not, you must either remove the device and it's software - or locate a Windows 8.1 compatible update on the web. Removing some drivers may make the system unstable - so if you're unable to find updates, post back for info on the one's that can/cannot be safely removed.

I'm particularly concerned with your bluetooth drivers as Win8 bluetooth drivers sometimes don't work well in Win8.1.
Analysis:
The following is for informational purposes only.

Code:
**************************Wed Jun 25 01:40:10.535 2014 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\062414-49765-01.dmp]
Windows 8 Kernel Version 9600 MP (8 procs) Free x64
Built by: 9600.17085.amd64fre.winblue_gdr.140330-1035
System Uptime:13 days 20:59:38.260
Probably caused by :pci.sys
BugCheck 9F, {3, ffffe0019aabb880, ffffd000790f5930, ffffe0019f9d9230}
BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: ffffe0019aabb880, Physical Device Object of the stack
Arg3: ffffd000790f5930, nt!TRIAGE_9F_POWER on Win7 and higher, otherwise the Functional Device Object of the stack
Arg4: ffffe0019f9d9230, The blocked IRP
BUGCHECK_STR: 0x9F
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCKET_ID: 0x9F_3_IMAGE_pci.sys
CPUID: "Intel(R) Core(TM) i7-4700HQ CPU @ 2.40GHz"
MaxSpeed: 2400
CurrentSpeed: 2394
BIOS Version G750JM.205
BIOS Release Date 02/11/2014
Manufacturer ASUSTeK COMPUTER INC.
Product Name G750JM
??????????????????????????????????????????????????????????????????????????????????????``
**************************Sat Jun 7 01:41:20.802 2014 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\060614-30562-01.dmp]
Windows 8 Kernel Version 9600 MP (8 procs) Free x64
Built by: 9600.17041.amd64fre.winblue_gdr.140305-1710
System Uptime:3 days 23:56:38.526
Probably caused by :pci.sys
BugCheck 9F, {3, ffffe000467de4a0, ffffd001704b9930, ffffe0004b3ef960}
BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: ffffe000467de4a0, Physical Device Object of the stack
Arg3: ffffd001704b9930, nt!TRIAG... Read more

http://www.eightforums.com/bsod-crashes-debugging/48768-ntoskrnl-exe-bsod.html