Windows Support Forum

BSOD random error 0x00000124, hal.dll at address ntoskrnl.exe+7cc40

Q: BSOD random error 0x00000124, hal.dll at address ntoskrnl.exe+7cc40

I keep getting a random BSOD, I get it a lot in Lightroom 3 but have gotten the same error doing nothing.

*** STOP: 0x00000124 (0x0000000000000000, 0xfffffa80053d5028, 0x00000000b2000040,
0x0000000000000800)
*** hal.dll - Address 0xfffff80002c15a3b base at 0xfffff80002c03000 DateStamp
0x4ce7c669

Minidump is attached

Relevancy 100%
Preferred Solution: BSOD random error 0x00000124, hal.dll at address ntoskrnl.exe+7cc40

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: BSOD random error 0x00000124, hal.dll at address ntoskrnl.exe+7cc40

Windows 7
4 GB ram
Intel Q9450
Gigabit MB
Raptor HD

Full data is now attached

http://www.sevenforums.com/bsod-help-support/201400-bsod-random-error-0x00000124-hal-dll-address-ntoskrnl-exe-7cc40.html
Relevancy 92.38%

Hi This problem started in Flight Simulator but now its random I have run memtest twice for four hours caused 0x00000124, address by random, BSOD ntoskrnl.exe+4adb3c error each all is fine I have a Western Digital HD and ran their diagnostic tool for it from their site I have reset the RAM after cleaning it also I dust out the machine regularly I checked the voltage in the BIOS and the and all fall in range BUT I also have CPUID HWMonitor and that shows different voltage readings way below what they should be ex V - V WAY off I don't know BSOD random, error 0x00000124, caused by address ntoskrnl.exe+4adb3c if that is correct or the reading in the BIOS itself The last reboot was when I was in Flight Simulator I ran it BSOD random, error 0x00000124, caused by address ntoskrnl.exe+4adb3c in window mode with GPUID running so I could monitor the temperature When it rebooted the last temp I saw was C which is hardly overheating I believe All of the last or so reboots show quot caused by address ntoskrnl exe adb c quot I'm leaning towards the power supply but the different readings are confusing Thanks in advance Dutch

A:BSOD random, error 0x00000124, caused by address ntoskrnl.exe+4adb3c

Sorry, forgot to attach the dm log collector info. Here it is.

http://www.sevenforums.com/bsod-help-support/335087-bsod-random-error-0x00000124-caused-address-ntoskrnl-exe-4adb3c.html
Relevancy 92.38%

Hi This problem started in Flight Simulator but now its random I have run memtest twice for four hours each all is fine I have a Western Digital HD and ran their diagnostic tool for it from their site I have reset the RAM after cleaning it also I dust out the machine regularly I checked the voltage in the BIOS and the and all fall in range BUT I also have CPUID HWMonitor and that shows different voltage readings way below what ntoskrnl.exe+4adb3c by address BSOD error 0x00000124, random, caused they should be ex V - V WAY off I don't know if that is correct or the reading in the BIOS itself The last reboot was when I was in Flight Simulator I ran it in window mode with BSOD random, error 0x00000124, caused by address ntoskrnl.exe+4adb3c GPUID running so I could monitor the temperature When it rebooted the last temp I saw was C which is hardly overheating BSOD random, error 0x00000124, caused by address ntoskrnl.exe+4adb3c I believe All of the last or so reboots show caused by BSOD random, error 0x00000124, caused by address ntoskrnl.exe+4adb3c address ntoskrnl exe adb c I'm leaning towards the power supply but the different readings are confusing so I'm asking for advice Thanks in advance Dutch

A:BSOD random, error 0x00000124, caused by address ntoskrnl.exe+4adb3c

I have a DM Log Collector dump file, which I tried to upload with this, but it was too big.  I could post anything from it if needed.

http://www.bleepingcomputer.com/forums/t/538177/bsod-random-error-0x00000124-caused-by-address-ntoskrnlexe4adb3c/
Relevancy 85.87%

Three months ago I had an issue with BSODs but they went away I'm a gamer and had no BSODS while playing many games Recently I've been playing the Hunter Red Orchestra F and the Battlefield beta I played for many hours without any issues then ntoskrnl.exe+7cc40 Sudden 0x00000124, BSOD, all of a sudden on the nd of this month had a BSOD while playing Battlefield Keep in mind I had played around hours of Battlefield over the previous days without a hitch so it's not like I was casually playing games And before that I played Red Orchestra for many hours no problems I played a few hours after my computer had restarted without issues The next day on the rd I played in the morning and sure enough minutes into playing I got another BSOD Sudden BSOD, 0x00000124, ntoskrnl.exe+7cc40 then another later in the day playing the Hunter a hunting game Each of these three BSODS gave the same error message Technical Information STOP x x xfffffa d c x b x ntoskrnl exe - Address xfffff c base at xfffff DateStamp x e aaa I have no idea what would have caused this I haven't installed anything new recently hardware or software wise besides those games I had installed new nvidia video drivers for my video card on the th thinking it was that I uninstalled them and installed the prior drivers that gave me no issues in the past The last BSOD occurred while using the older drivers so I don't think it's that I've been stable for over months without issues I'm going to try downclocking my cpu ram to see if that helps but I was stable before that Any idea what the cause is I attached my minidump files to this posting Thanks for trying to help

A:Sudden BSOD, 0x00000124, ntoskrnl.exe+7cc40

Hello Efstratios

* Please remove any CD visualization programs such as Daemon Tools and Alcohol 120%.

They use a driver, found in your dmp, called sptd.sys, that is notorious for causing BSODs.

Use this SPTD uninstaller DuplexSecure - Downloads DuplexSecure - FAQ

When you're done you can use this Freeware MagicISO Virtual CD/DVD-ROM(MagicDisc) in its place.
* Your Norton/Symantec. This is a known cause of BSOD's.
Remove and replace with Microsoft Security Essentials.

http://us.norton.com/support/kb/web_...080710133834EN

Virus, Spyware & Malware Protection | Microsoft Security Essentials

* Old drivers

Code:
ctgame.sys 4/7/2004 11:42:49 AM fffff880`054eb000 33f9f7f6`054efc80 0x33f9ff7600004c80 0x40734e89
RTCore64.sys 5/25/2005 5:39:12 PM fffff880`089f4000 fffff880`089fa000 0x00006000 0x42941d90
secdrv.SYS 9/14/2006 12:18:38 AM fffff880`08115000 fffff880`08120000 0x0000b000 0x4508052e
COMMONFX.DLL 4/10/2007 12:08:38 AM fffff880`0674c000 fffff880`06777000 0x0002b000 0x461a3ad6
CTAUDFX.DLL 4/10/2007 12:08:39 AM fffff880`06f51000 fffff080`07000000 0xfffff800000af000 0x461a3ad7
CTSBLFX.DLL 4/10/2007 12:08:42 AM fffff880`06ea6000 fffff880`06f51000 0x000ab000 0x461a3ada
Rtnic64.sys 3/31/2008 4:39:38 PM fffff880`05263000 fffff300`05277000 0xfffffa8000014000 0x47f0791a
000.fcl 9/27/2008 12:11:22 AM fffff880`08163000 fffff880`0818e000 0x0002b000 0x48dcdf7a
adfs.SYS 11/4/2008 3:48:14 AM fffff880`07c00000 fffff300`07c18000 0xfffffa8000018000 0x490f2b4e
gdrv.sys 3/13/2009 2:22:29 PM fffff880`089de000 fffff880`089e7000 0x00009000 0x49b9d175
ALSysIO64.sys 4/20/2009 6:41:04 AM fffff880`08df8000 fffff300`08e00000 0xfffffa8000008000 0x49eb7e50
spldr.sys 5/12/2009 3:56:27 AM fffff880`02141000 fffff880`02149000 0x00008000 0x4a0858bb
lirsgt.sys 5/18/2009 12:06:57 AM fffff880`08062000 fffff880`0806f000 0x0000d000 0x4a100bf1
atksgt.sys 5/18/2009 12:36:34 AM fffff880`0800a000 fffff880`08059000 0x0004f000 0x4a1012e2
GEARAspiWDM.sys 5/18/2009 11:17:04 PM fffff880`05256000 fffff300`05263000 0xfffffa800000d000 0x4a1151c0
LHidFilt.Sys 6/18/2009 3:49:39 AM fffff880`075b7000 fffff880`075ca000 0x00013000 0x4a391ea3
LMouFilt.Sys 6/18/2009 3:49:43 AM fffff880`075d7000 fffff880`075eb000 0x00014000 0x4a391ea7
LUsbFilt.Sys 6/18/2009 3:49:46 AM fffff880`07577000 01fff880`07587000 0x0200000000010000 0x4a391eaa
How To Find Drivers:




Quote:
- search Google for the name of the driver
- compare the Google results with what's installed on your system to figure out which device/program it belongs to
- visit the web site of the manufacturer of the hardware/program to get the latest drivers (DON'T use Windows Update or the Update driver function of Device Manager).
- if there are difficulties in locating them, post back with questions and someone will try and help you locate the appropriate program.


- - The most common drivers are listed on this page: Driver Reference Driver Reference
- - Driver manufacturer links are on this page: Drivers and Downloads

http://www.sevenforums.com/bsod-help-support/189971-sudden-bsod-0x00000124-ntoskrnl-exe-7cc40.html
Relevancy 84.01%

Hello,

I constantly have BSOD's... when i watch the movie (avi, mkv) in any player (GOM, MPC-HC, Splash Pro...) and when i browsing internet (Firefox, Opera, Chrome, IE9).

I reinstalled Windows twice, even buy PCI network adapter, still same problem...
Already ran Memtest (6 passes 0 errors) and few of this dump files are when i ran Driver Verifier.

And yes, this problem started when i installed Service Pack 1, i don't know is that relevant..

My specs:
Asrock A770DE+
4 GB DDR2 Kingmax
MSI GTX460 Hawk
AMD Phenom ll X4 B50
Windows 7 Ultimate x64 SP1
Microsoft Security Essentials

Everything is in attachment.
Any help on this issue would be much appreciated.

Thank you in advance!

A:Random BSOD's, error 0x0000001e, 0a, caused by ntoskrnl.exe+7cc40

  
Quote: Originally Posted by zvone07


Hello,

I constantly have BSOD's... when i watch the movie (avi, mkv) in any player (GOM, MPC-HC, Splash Pro...) and when i browsing internet (Firefox, Opera, Chrome, IE9).

I reinstalled Windows twice, even buy PCI network adapter, still same problem...
Already ran Memtest (6 passes 0 errors) and few of this dump files are when i ran Driver Verifier.

And yes, this problem started when i installed Service Pack 1, i don't know is that relevant..

My specs:
Asrock A770DE+
4 GB DDR2 Kingmax
MSI GTX460 Hawk
AMD Phenom ll X4 B50
Windows 7 Ultimate x64 SP1
Microsoft Security Essentials

Everything is in attachment.
Any help on this issue would be much appreciated.

Thank you in advance!


8 different causes most pointing to hardware. If you are overclocking stop.

Please run these two tests to verify your memory and find which driver is causing the problem.
1-Memtest.

*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

RAM - Test with Memtest86+

2-Driver verifier






Quote:
I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.


Driver Verifier - Enable and Disable

http://www.sevenforums.com/bsod-help-support/194859-random-bsods-error-0x0000001e-0a-caused-ntoskrnl-exe-7cc40.html
Relevancy 110.08%

Generous experts,

I am getting somewhat random, though more often on "wake-up" BSOD. It seems that it may be related to the cpu, as the event view states:
A fatal hardware error has occurred.

Reported by component: Processor Core
Error Source: Machine Check Exception
Error Type: Cache Hierarchy Error
Processor ID: 2

The details view of this entry contains further information.I am moderately tech savvy, but this is beyond my skill level. I have searched this forum and web for a solution, and did not find any that were quite close enough - at least by my viewing.

Any suggestions would be very much appreciated

Thank you!

A:BSOD on wake-up error 0x00000124, driver hal.dll, address ntoskrnl.exe

Code:
BugCheck 124, {0, fffffa80078c6028, bf800000, 124}
You are having 0x124 bugchecks which indicate a fatal hardware error has occurred.


Code:
2: kd> !errrec fffffa80078c6028
===============================================================================
Common Platform Error Record @ fffffa80078c6028
-------------------------------------------------------------------------------
Record Id : 01cf84f0d193612a
Severity : Fatal (1)
Length : 928
Creator : Microsoft
Notify Type : Machine Check Exception
Timestamp : 6/10/2014 21:15:27 (UTC)
Flags : 0x00000000

===============================================================================
Section 0 : Processor Generic
-------------------------------------------------------------------------------
Descriptor @ fffffa80078c60a8
Section @ fffffa80078c6180
Offset : 344
Length : 192
Flags : 0x00000001 Primary
Severity : Fatal

Proc. Type : x86/x64
Instr. Set : x64
Error Type : Cache error
Operation : Generic
Flags : 0x00
Level : 0
CPU Version : 0x00000000000306c3
Processor ID : 0x0000000000000002

===============================================================================
Section 1 : x86/x64 Processor Specific
-------------------------------------------------------------------------------
Descriptor @ fffffa80078c60f0
Section @ fffffa80078c6240
Offset : 536
Length : 128
Flags : 0x00000000
Severity : Fatal

Local APIC Id : 0x0000000000000002
CPU Id : c3 06 03 00 00 08 10 02 - bf fb da 7f ff fb eb bf
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00

Proc. Info 0 @ fffffa80078c6240

===============================================================================
Section 2 : x86/x64 MCA
-------------------------------------------------------------------------------
Descriptor @ fffffa80078c6138
Section @ fffffa80078c62c0
Offset : 664
Length : 264
Flags : 0x00000000
Severity : Fatal

Error : DCACHEL0_WR_ERR (Proc 2 Bank 1)
Status : 0xbf80000000000124
Address : 0x000000021b887200
Misc. : 0x0000000000000086
The Machine Check Exception indicates that the CPU has found a fault with the a piece of hardware and has bugchecked. We cannot really identify the cause without proper troubleshooting stress tests.

The 2nd parameter is the address that contains the WHEA (Windows Hardware Error Architecture) record.
Its a Level 0 cache write error.

There's only so much we can do until it comes down to a faulty processor, lets begin.

Stress test your CPU with Prime95

I recommend running Prime95 for around 2 hours



   Warning

As with most stress tests your component's temperature will rapidly increase.
It is advised that you download a temperature monitoring program like HWmonitor
Keep an eye on your temperatures and stop the tests if it starts to overheat

Stress test your graphics card with Furmark

I recommend running it for around 30 minutes



   Warning

Furmark will increase the temperature of your GPU rapidly so keep and eye on your temperatures

Memtest86 will test your RAM



   Information

Run Memtest86 for at least 8 passes so we get enough information to confirm that your RAM isn't failing

Run a Disk Check to scan for errors



   Note

Afterwards go into an Elevated Command Prompt (Run as administrator) and type in sfc /scannow
If it finds errors reboot and run the scan two more times

Run SeaTools to see if your HDD or SSD is failing

Try removing the CMOS battery then putting it back in to clear the BIOS of any improper settings.
Make sure you keep an eye on the temperatures.

Remove these programs...


Code:
Start Menu\Programs\ASUS\AI Suite 3 Public:Start Menu\Programs\ASUS\AI... Read more

http://www.sevenforums.com/bsod-help-support/334345-bsod-wake-up-error-0x00000124-driver-hal-dll-address-ntoskrnl-exe.html
Relevancy 109.22%

hi

can someone please help i keep getting blue error screens different types of errors but all having the same crash address been using bluescreen viewer to see the errors

iv tried as much as i can by updating drivers and checking if windows is up to date

looked on other forums but just want a simple answer to what the problem actually is

iv uploaded the health report and the crash files

thank u

A:BSOD all from same crash address ntoskrnl.exe+7cc40.. please help!!

20 memory dumps over the past 3 days - Wow!

If you are using a USB mouse, it's safe to ignore the error in perfmon /report about a PS2 mouse

Only 63 memory dumps after SP1 - most systems have more than 70. Please check Windows Update for all available updates.

Windows 7 does not like wireless USB devices such as the NETGEAR WNDA3100v2 device installed on your system. Here's my rant about them:





Quote:
I do not recommend using wireless USB devices. Especially in Win7 systems.
These wireless USB devices have many issues with Win7 - and using Vista drivers with them is almost sure to cause a BSOD.
Should you want to keep using these devices, be sure to have Win7 drivers - DO NOT use Vista drivers!!!
An installable wireless PCI/PCIe card that's plugged into your motherboard is much more robust, reliable, and powerful.


More to follow when the memory dumps are finished running (and I have to feed my dogs now!).....

http://www.sevenforums.com/bsod-help-support/212524-bsod-all-same-crash-address-ntoskrnl-exe-7cc40-please-help.html
Relevancy 108.79%

hello Did my first build Moved over the ssd and hdd's to new build all seemed well and good as I install all drivers from gigabyte disk pc seem to 0x00000124. Address playing ntoskrnl.exe+7f140 BSOD Error Company. Bad run BSOD playing Bad Company. Error 0x00000124. Address ntoskrnl.exe+7f140 fine until I play an online game I like battlefield bad company played it a TON on old rig and never ever had a BSOD no after about to minutes of play its happened every single time I try to play not sure what all more info you need but I will provide any info I can just ask I run win ultimate and ubuntu WUBI install I made a backup with acronis true image w plus pack via a boot cd with plus pack placed that backup onto a brand new ssd I bought a second ocz vertex thinking of doing a raid setup but decide against it do to loss of TRIM and it was odd as one os either ubuntu or win would boot and work with networking but not both the two ssd's are the same so i simply unplug the new one and plugged in the old one into the new build and every thing both os with networking work fine UNTILL I try to play bc I have added a second gtx in SLI using the way SLI connnector as the spacing of the x slots on the mobo I greatly appreciate your help with this issue not sure if I can replace the ntoskrnl exe or whatever else it may be I have read the guide to posting here and believe I have followed it if I did something wrong please bear with me and I will do it properly again I greatly appreciate your helping me correct my issues thanks and good day

A:BSOD playing Bad Company. Error 0x00000124. Address ntoskrnl.exe+7f140

Welcome to SF

WOW, 32 GB of ram is allot what are you going to do with all that?
Anyway, your dumps point toward defective/corrupted memory.

No need to test with memtest86+ right away, I would suggest you to manually
test each stick on different slots of your computer to identify the bad one.

For more information on your bug check go through the guide below:
→ Stop 0x124 - what it means and what to try

http://www.sevenforums.com/bsod-help-support/255737-bsod-playing-bad-company-error-0x00000124-address-ntoskrnl-exe-7f140.html
Relevancy 108.36%

Hi there, I have been having a long term issue with BSOD. I initially fixed my first string of BSODs due to my ram sticks being in the wrongs slots. That fixed it for about 3 months. But I just recently bought a new video card. GeForce GTX560ti. My older card being ati radeon 4850. I updated my drivers the other night to a beta driver for the Battlefield 3 beta. That is when I noticed 2 BSODs in 1 day. I'm attaching my mini dump folder in hopes that maybe I can find some technical support as I am not the most knowledgeable on computers. Any help will be grateful.
 

A:BSOD - 2 different Address : ntoskrnl.exe+7cc40 + anthrx.sys+5c8c1

Howdy,

Probably caused by : athrx.sys

Atheros network adapter driver

Try seeing if there are any updates for it.
 

https://forums.techguy.org/threads/bsod-2-different-address-ntoskrnl-exe-7cc40-anthrx-sys-5c8c1.1021685/
Relevancy 108.36%

Hi I recently built a new rig for my friend using all brand new components and used ESD precautions throughout After a couple of days he called to say getting Blue Screens of Death He lives a little way away from me so I remoted in and installed Nirsoft Blue Screen View I have both attached and copied and pasted details from the crashes If I need the Mini Solved: Almost Crash : - Address Always BSOD ntoskrnl.exe+7cc40 Dump files I can get those I ran Memtest for half hour and no errors were detected - any ideas ------------ Dump File - - Solved: BSOD - Almost Always Crash Address : ntoskrnl.exe+7cc40 dmp Crash Time Bug Check String SYSTEM SERVICE EXCEPTION Bug Check Code x b Parameter c Parameter fffff c b Parameter fffff cc fd Parameter Caused By Driver ntoskrnl exe Solved: BSOD - Almost Always Crash Address : ntoskrnl.exe+7cc40 Caused By Address ntoskrnl exe cc File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win sp gdr - Processor x Crash Address ntoskrnl exe cc Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time Bug Check String NTFS FILE SYSTEM Bug Check Code x Parameter c a Parameter Parameter Parameter Caused By Driver Ntfs sys Caused By Address Ntfs sys d File Description Product Name Company File Version Processor x Crash Address ntoskrnl exe cc Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time Bug Check String NTFS FILE SYSTEM Bug Check Code x Parameter fb Parameter fffff a Parameter fffff e Parameter fffff f Caused By Driver Ntfs sys Caused By Address Ntfs sys a File Description Product Name Company File Version Processor x Crash Address ntoskrnl exe cc Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time Bug Check String BAD POOL HEADER Bug Check Code x Parameter Parameter fffff c d Parameter b Parameter b Caused By Driver win k sys Caused By Address win k sys c File Description Product Name Company File Version Processor x Crash Address ntoskrnl exe cc Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time Bug Check String SYSTEM SERVICE EXCEPTION Bug Check Code x b Parameter c Parameter fffff d a Parameter fffff ad d c Parameter Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe cc File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win sp gdr - Processor x Crash Address ntoskrnl exe cc Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time Bug Check String MEMORY MANAGEMENT Bug Check Code x a Parameter Parameter fffffa fc d Parameter ffff Parameter Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe cc File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win sp gdr - Processor x Crash Address ntoskrnl exe cc Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time Bug Check String SYSTEM SERVICE EXCEPTION Bug Check Code x b Parameter c Parameter fffff Parameter fffff e Parameter Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe cc File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win sp gdr - Processor x Crash Address nto... Read more

A:Solved: BSOD - Almost Always Crash Address : ntoskrnl.exe+7cc40

https://forums.techguy.org/threads/solved-bsod-almost-always-crash-address-ntoskrnl-exe-7cc40.1020658/
Relevancy 106.64%

Hi all, I have been getting BSODs since January 2012 while playing games or simply surfing the internet using Firefox or IE9.

My PC build is as follows:

AMD Phenom II X4 945
Biostar A880G+ motherboard
Kingston DDR3 PC1333 x 2 (4GB total)
Palit GTX460 768MB PCI-E
Western Digital HDD 500GB SATA
Windows 7 Home Premium 64bit (OEM DVD from retail shop)

Have just taken out 1 DRAM to isolate the problem; since there are some cases like mine that eventually suggest physical memory module problems in this forum.

Dump files and system health report html file attached.

A:Random BSOD - ntoskrnl.exe+7cc40

Hi Miki, welcome to SevenForums!

Four dumps, two memory management, one IRQL and one System Service Exception. There's a few things I want you to do!

First off, in your drivers list I noticed you have dtsoftbus01.sys, which is a driver for Daemon Tools, and Daemon Tools is a VERY large causer of BSODs in the W7 environment. Please fully uninstall Daemon Tools and then restart your system.

Two tests I'd like you to run:






Quote:
Memtest:

Read the following to test your memory for errors.

Driver Verifier:

Read the following to enable Driver Verifier. Use Driver Second if Memtest finds nothing, as it's likely a software / driver issue, we just aren't being told what it is, and hopefully Driver Verifier will than force a crash if it finds the violating driver.



Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1A, {41790, fffffa80008fa0f0, ffff, 0}

Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+36024 )

Followup: MachineOwner
---------

1: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

MEMORY_MANAGEMENT (1a)
# Any other values for parameter 1 must be individually examined.
Arguments:
Arg1: 0000000000041790, The subtype of the bugcheck.
Arg2: fffffa80008fa0f0
Arg3: 000000000000ffff
Arg4: 0000000000000000

Debugging Details:
------------------
BUGCHECK_STR: 0x1a_41790

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

PROCESS_NAME: MemeoDashboard

CURRENT_IRQL: 0

LAST_CONTROL_TRANSFER: from fffff8000310a150 to fffff8000309ac40

STACK_TEXT:
fffff880`092715f8 fffff800`0310a150 : 00000000`0000001a 00000000`00041790 fffffa80`008fa0f0 00000000`0000ffff : nt!KeBugCheckEx
fffff880`09271600 fffff800`030880ff : fffffa80`00000000 00000000`085fffff 00000000`00000000 00000000`00000000 : nt! ?? ::FNODOBFM::`string'+0x36024
fffff880`092717c0 fffff800`03099ed3 : ffffffff`ffffffff fffff880`09271a90 fffff880`09271a98 00000000`00008000 : nt!NtFreeVirtualMemory+0x61f
fffff880`092718c0 fffff800`03096470 : fffff800`033179af 00000000`00000010 00000000`00000086 fffff880`09271a88 : nt!KiSystemServiceCopyEnd+0x13
fffff880`09271a58 fffff800`033179af : 00000000`00000010 00000000`00000086 fffff880`09271a88 00000000`00000000 : nt!KiServiceLinkage
fffff880`09271a60 fffff800`03370b8d : 00000000`08500000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!RtlFreeUserStack+0x27
fffff880`09271a90 fffff800`03370eed : fffff880`00000000 00000000`0777e300 00000000`7ef12000 00000000`00000000 : nt!PspExitThread+0x5dd
fffff880`09271b90 fffff800`03370ff5 : fffffa80`06e74b60 00000000`00000000 fffffa80`06e74b60 00000000`0777ec00 : nt!PspTerminateThreadByPointer+0x4d
fffff880`09271be0 fffff800`03099ed3 : fffffa80`06e74b60 fffff880`09271ca0 00000000`7ef12000 00000000`7ef12000 : nt!NtTerminateThread+0x45
fffff880`09271c20 00000000`771f184a : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
00000000`0777e348 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x771f184a
STACK_COMMAND: kb

FOLLOWUP_IP:
nt! ?? ::FNODOBFM::`string'+36024
fffff800`0310a150 cc int 3

SYMBOL_STACK_INDEX:... Read more

http://www.sevenforums.com/bsod-help-support/216487-random-bsod-ntoskrnl-exe-7cc40.html
Relevancy 106.64%

So I do have a OC, but it was stable (Intel Burn Test, Prime95). I was playing the Binding of Isaac (flash game on steam). What is most likely the cause here?

A:Had a random BSoD, not sure what the cause, ntoskrnl.exe+7cc40, dmp in

Oh I should note my PC first froze (but my mouse could still move) for a while, before the blue screen came.

Could flash have caused this? I did get a Flash update today.

http://www.sevenforums.com/bsod-help-support/198614-had-random-bsod-not-sure-what-cause-ntoskrnl-exe-7cc40-dmp.html
Relevancy 106.64%

Hello,

I am getting BSOD every couple of days with no apparent reason sometime with doing virus scans, running windows movie maker and sometime while idle. Not sure what's going on please help - I have attached .dmp for assessment.

http://www.sevenforums.com/attachmen...1&d=1331424155

Hopefully someone can advise me on this not really a huge problem but would like to resolve it before it becomes one.

A:Random BSOD - ntoskrnl.exe (nt+7cc40) Please Help

Related to your directx

Diagnosing basic problems with DirectX

http://www.sevenforums.com/bsod-help-support/218697-random-bsod-ntoskrnl-exe-nt-7cc40-please-help.html
Relevancy 105.35%

BSOD at random times, seems to occur more often though, when referencing hard drive memory.
My first problem I need help with is when i try to access a .dmp file i get told something about symbols referencing the following:
ntoskrnl.exe ( nt+7cc40 )
any idea how to fix it?

A:random BSOD's and cant do .dmp ntoskrnl.exe ( nt+7cc40 ) problem

PS. sorry i am not following the exact rules regarding the whole .dmp file thing but i dont know how to do that...

http://www.sevenforums.com/bsod-help-support/208585-random-bsods-cant-do-dmp-ntoskrnl-exe-nt-7cc40-problem.html
Relevancy 105.35%

Hello,

This is my 1st time installing Windows 7 Ultimate 64bit on my new rig. While i was using my pc normally, not gaming, it just crashed and went into blue screen. Twice.
First error was MEMORY_MANAGEMENT and the second error was IRQL_NOT_LESS_OR_EQUAL.
And so, i tried using BlueScreenView to open the .dmp files and both of the .dmp files are caused by ntoskrnl.exe.

My rig's spec:
Windows 7 Ultimate 64bit SP1
Intel Core i5 2500
Asus P8P67 LE
Mushkin 4GB DDR3 x 2
500GB WD HDD
Nvidia 9800GT

I've attached the .dmp files. Any help on this issue would be much appreciated. Thanks!

A:Random BSOD caused by ntoskrnl.exe+7cc40

  
Quote: Originally Posted by getxposed


Hello,

This is my 1st time installing Windows 7 Ultimate 64bit on my new rig. While i was using my pc normally, not gaming, it just crashed and went into blue screen. Twice.
First error was MEMORY_MANAGEMENT and the second error was IRQL_NOT_LESS_OR_EQUAL.
And so, i tried using BlueScreenView to open the .dmp files and both of the .dmp files are caused by ntoskrnl.exe.

My rig's spec:
Windows 7 Ultimate 64bit SP1
Intel Core i5 2500
Asus P8P67 LE
Mushkin 4GB DDR3 x 2
500GB WD HDD
Nvidia 9800GT

I've attached the .dmp files. Any help on this issue would be much appreciated. Thanks!


Easy your Kaspersky. Remove and replace with Microsoft Security Essentials

http://support.kaspersky.com/downloa...vremover10.zip

Microsoft Security Essentials - Free Antivirus for Windows

http://www.sevenforums.com/bsod-help-support/194614-random-bsod-caused-ntoskrnl-exe-7cc40.html
Relevancy 104.06%

Hey guys so I've been getting some random BSOD errors every few days or so I usually leave my computer on when I am at work or sleep and either when I come home Random BSOD error ntoskrnl.exe (address driver ntoskrnl.exe+74ec0) or wake up my computer is off So I turn it on and it says that the computer didn't Random BSOD error driver ntoskrnl.exe (address ntoskrnl.exe+74ec0) shut down properly when I start up I downloaded the BlueScreenView and noticed I've had some BSOD three times within days One Random BSOD error driver ntoskrnl.exe (address ntoskrnl.exe+74ec0) was a PAGE FAULT IN NONPAGED AREA error which I believe was a RAM problem i bought new RAM and installed it plus OCed it to but I believe it was making my system unstable so I reset the speed to default and haven't gotten that error again but after that I've gotten two IRQL NOT LESS OR EQUAL errors related to ntoskrnl exe I did some research online and from what I read it could be a number of problems I'm just not sure where to start and could really use some guidance and advice I uploaded my dmp files for anyone who knows how to look at these Thank in advance

A:Random BSOD error driver ntoskrnl.exe (address ntoskrnl.exe+74ec0)

Welcome to 7F. I'll take a look at your dumps and see if I can get you BSOD free.


One

 NETGEAR NEUTRAL WIRELESS SOLUTION

Your Netgear Neutral Wireless Solution driver has been flagged. It is quite old a could probably do with updating. Check for updates here
Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {0, 2, 1, fffff800034c88ac}

*** WARNING: Unable to verify timestamp for scmndisp.sys
*** ERROR: Module load completed but symbols could not be loaded for scmndisp.sys
Probably caused by : scmndisp.sys ( scmndisp+16d1 )

Followup: MachineOwner
---------

1: kd> lmvm scmndisp
start end module name
fffff880`0188b000 fffff880`01895000 scmndisp T (no symbols)
Loaded symbol image file: scmndisp.sys
Image path: \SystemRoot\system32\DRIVERS\scmndisp.sys
Image name: scmndisp.sys
Timestamp: Fri May 27 11:30:22 2011 (4DDF7D3E)
CheckSum: 00009C0C
ImageSize: 0000A000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4


Two

 HARDWARE DIAGNOSTICS

A few of your dumps (0x50, 0x124) are pointing towards hardware errors. 0x124s are usually always hardware errors but rarely give us an indication of what the problem actually is. In this case we may have struck lucky as this particular one shows up ASUS AI Suite III. The utilities listed below are the ones I'm concerned about.Attachment 353971


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa800752d028, Address of the WHEA_ERROR_RECORD structure.
Arg3: 00000000bf800000, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000000000124, Low order 32-bits of the MCi_STATUS value.

Debugging Details:
------------------
BUGCHECK_STR: 0x124_GenuineIntel

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

PROCESS_NAME: AISuite3.exe

CURRENT_IRQL: f

ANALYSIS_VERSION: 6.3.9600.17029 (debuggers(dbg).140219-1702) amd64fre
We have seen motherboard packaged utilities cause 0x124s in the past and it could be the case here.
Uninstall ASUS AI Suite III and test the system for stability.
Run SeaTools to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use
Download and run MemTest86+ to test your RAM. RAM - Test with Memtest86+


   Note
Attachment 353972 Run MemTest86+ for at least 8 passes. Ideally set it off before you go to bed and leave it overnight, we're looking for zero errors here. A single error will show something's going bad with your RAM.


Three

 NVIDIA GPU

You've also received a 0x116 which is a VIDEO_TDR_ERROR (Timeout Detection & Recovery) which means your GPU driver has crashed and has failed to recover in time. This could be down to the driver, the card itself or possibly the power to the card.
Code:
******************************************************************************... Read more

http://www.sevenforums.com/bsod-help-support/365399-random-bsod-error-driver-ntoskrnl-exe-address-ntoskrnl-exe-74ec0.html
Relevancy 103.2%

Hello my laptop is a HP dv originally with vista x OEM upgraded to seven pro x RETAIL with accademy program Upgrade done a year ago NEVER a problem never a BSOD Basically never problem with my laptot My (?) PC after caused random start by specially BSOD ntoskrnl.exe+7cc40 hardware is old but i never have problems with it I replaced only power charger and battery I'm random BSOD caused by ntoskrnl.exe+7cc40 (?) specially after start PC unable to run System Health Report with perfmon random BSOD caused by ntoskrnl.exe+7cc40 (?) specially after start PC report because i receive a timeout error doing it but i see that on C PerfLogs System Diagnostics i've all reports that i tried to do I'll attach it and also minidump folder Using Blue screen view i saw that BSOD SYSTEM SERVICE EXCEPTION are always caused by ntoskrnl exe File di Dump - - dmp Data e Ora del Crash Bug Check String SYSTEM SERVICE EXCEPTION Bug Check Code x b Parametro c Parametro fffff Parametro fffff c ea Parametro Causato Da Driver ntoskrnl exe Causato Da Indirizzo ntoskrnl exe cc Descrizione del File NT Kernel amp System Nome del Prodotto Microsoft Windows Operating System Societ Microsoft Corporation Versione del File win sp gdr - Processore x Crash Address ntoskrnl exe cc Stack Address Stack Address Stack Address Nome Computer Percorso completo C Windows Minidump - - dmp Processori Versione maggiore Versione minore Dimensioni file Dump I need help Thanks you

A:random BSOD caused by ntoskrnl.exe+7cc40 (?) specially after start PC

> Your crash was related to oodivd.sys DiskImage Virtual Disk Driver (Win32) from O&O Software GmbH dated 2/2009
Suggest you remove it to test.
NB, if critical update to newest
> Please remove any CD visualization programs such as Daemon Tools and Alcohol 120%.

They use a driver, found in your dmp, called sptd.sys, that is notorious for causing BSODs.

Use this SPTD uninstaller DuplexSecure - Downloads DuplexSecure - FAQ

On completion you can use this Freeware:

MagicISO Virtual CD/DVD-ROM (MagicDisc) in its place

Using MagicISO to create ISO image files

http://www.sevenforums.com/bsod-help-support/212682-random-bsod-caused-ntoskrnl-exe-7cc40-specially-after-start-pc.html
Relevancy 95.03%

i keep getting BSOD when playing game new graphics i dont know where to start when its comes to BSOD stuff

110414-10576-01.dmp 11/4/2014 10:48:39 PM 0x00000124 00000000`00000000 fffffa80`0af318f8 00000000`00000000 00000000`00000000 ntoskrnl.exe ntoskrnl.exe+4a63cc NT Kernel & System Microsoft? Windows? Operating System Microsoft Corporation 6.1.7600.16385 (win7_rtm.090713-1255) x64 ntoskrnl.exe+4a63cc C:\Windows\Minidump\110414-10576-01.dmp 6 15 7600 262,144 11/4/2014 10:48:41 PM is some info i dont know what else yall need

A:0x00000124 ntoskrnl.exe ntoskrnl.exe+4a63cc BSOD Error runninganygame

Please Help

http://www.sevenforums.com/bsod-help-support/351242-0x00000124-ntoskrnl-exe-ntoskrnl-exe-4a63cc-bsod-error-runninganygame.html
Relevancy 93.74%

Been getting infrequent BSOD errors on my Windows 10 PC (Home edition).

I had a look on BlueScreenView, seems like a lot of the bugcheck BSOD is ntoskrnl related but I can't work out if it's hardware related or some bad driver somewhere.
The computer is 9 months old, custom built gaming PC.Temperatures are low <60C at load, <30C at idle (waterblock cooling on CPU)System is stable when gaming, a lot of the BSOD is happening at idle. (I leave my PC running all the time)The OS was upgraded from Windows 8.1 to Windows 10 in late 2015.System felt more stable under Windows 8.1, not really experienced many BSOD under Win8.1I have tested the memory with 10 successful passes (12 hrs).Have run DirectX diagnostics and cyclic Heaven/Valley benchmarks - no crash.

A:Random BSOD (Windows 10) ntoskrnl/0x00000124 bugcheck

Sorry, zip file attached with the diagnostics from DM Log Collector

UNSC-CORTANA-Thu_04_28_2016_180201_69.zip

http://www.tenforums.com/bsod-crashes-debugging/48609-random-bsod-windows-10-ntoskrnl-0x00000124-bugcheck.html
Relevancy 93.74%

I'm having this BSOD since months ago and I can't find a good solution Sometimes I can use my computer for over 0x00000124 8.1 Windows ntoskrnl.exe BC Random Code BSOD a month with no issues playing everyday for hours browsing the web etc But sometimes like today I get BSOD's on the same day playing for example Final Fantasy XIV ARR I tried Random BSOD BC Code 0x00000124 ntoskrnl.exe Windows 8.1 many things before like Memtest Cpu test etc and I can't understand if my Hardware is the problem or some driver I also have an after market Cpu Cooler so my temps are fine and my case has really good ventilation I uploaded this dumps a few days ago after I used Driver Veryfier I got a C BC Code error on those Minidumps and the problem was nroskrnl exe Only with Driver Veryfier I'm able to reproduce this BSOD is always random when I'm just using my computer I uploaded those dumps here https mega co nz F NlwYbT eaXDPO NYw z Mxt S Y I uploaded my latest dumps on this post using the SF Diagnostics Tool any advice would be much appreciated Edit with my specs Computer typePC DesktopComputer Manufacturer Model NumberCustom Build OSWindows bit CPUi k stock MotherboardGigabyte Z -D HP MemoryKingston HyperX GB DD Graphics Card s GTX GB Gigabyte Hard DrivesSeagate Barracuda RPM MB

A:Random BSOD BC Code 0x00000124 ntoskrnl.exe Windows 8.1

Uploaded my latest BSOD.. any advice will be much apreciated

http://www.eightforums.com/bsod-crashes-debugging/47745-random-bsod-bc-code-0x00000124-ntoskrnl-exe-windows-8-1-a.html
Relevancy 93.74%

Hello sevenforums.
My PC has always given me trouble in the past by randomly restarting and getting BSODed. I used to "live with it" but over last 2-3 months it has gotten out of hand. My PC restarts at least 2-3 times per day. I always get 0x124 bug check code and so tested the processor with prime95 (for 2-3 hours) and ram with memtest86+(3 passes) but got clean results. I've attached the latest 10 minidumps. I'm at my wits end and REALLY dont want to reinstall windows! :O
Thanks in advance.
Edit: It does not even show a bsod but directly reboots.

A:Random frequent BSOD 0x124 / 0x00000124 ntoskrnl.exe?

Minidumps attached

http://www.sevenforums.com/bsod-help-support/273895-random-frequent-bsod-0x124-0x00000124-ntoskrnl-exe.html
Relevancy 93.74%

hello forum i just wanted to share the findings regarding my BSOD error symptoms to get assistance with troubleshooting you should follow the instructions given in http www sevenforums com crashes-d tructions html however as very basic initial steps i personally prefer this approach create a bootable CD for memtest from Memtest - Advanced Memory Diagnostic Tool and let it run for hours if there is just one single error it means your memory is definitely bad if there are no errors your memory is quot most likely quot OK get a copy of BlueScreenView from NirSoft - freeware utilities password recovery system utilities desktop utilities to easily read the crash dumps on my system i was getting sporadic BSOD crashes - each time random stop codes including DRIVER IRQL NOT LESS OR EQUAL IRQL NOT LESS OR EQUAL KMODE EXCEPTION NOT HANDLED MEMORY MANAGEMENT PAGE FAULT IN NONPAGED AREA PFN [SOLVED] BSOD "ntoskrnl.exe+7cc40" random around LIST CORRUPT POOL CORRUPTION IN FILE AREA SYSTEM SERVICE EXCEPTION SYSTEM THREAD EXCEPTION NOT HANDLED i wasn't able to make out any pattern the only thing in common was the crash address that would always be quot ntoskrnl exe cc quot in many cases the crash dumps will indicate a particular driv r to be causing the trouble but with my system this was not the case by coincidence i had identified a pattern how to reproduce a BSOD by doing certain actions in a pre-defined sequence so this would allow me to proceed with systematic troubleshooting in the end it turned out [SOLVED] random BSOD around "ntoskrnl.exe+7cc40" i was using some defective RAM - or quot strange quot RAM at least it took me quite a while because [SOLVED] random BSOD around "ntoskrnl.exe+7cc40" of the following reasons BSOD seemed to occur randomly sporadically BSOD was showing random stop codes memtest did not show any erros conclusion i would recommend the following approach use memtest to check if there are any quot obvious quot errors with your RAM use BlueScreenView to check if any device driv r seems to be causing the error in case you're getting quot random quot errors like me as outlined above take one more closer look at your RAM in case this still doesn't get you any further follow the posting [SOLVED] random BSOD around "ntoskrnl.exe+7cc40" instructions to attach the required files the guys on this forum are doing a great job and will most likely be able to point you in the right direction for additional troubleshooting cheers francoiste

A:[SOLVED] random BSOD around "ntoskrnl.exe+7cc40"

my memory was showing these strange symptoms due to physical damage.
please see the <attached picture>.

if you look at the photograph it appears just so obvious.
but believe me, you won't detect it with your bare eyes.
you need either a magnifying glass or (as in my case) a high-end photographic camera with super zoom.

note: i'm not sure if this damage was there right from the beginning (DOA) or caused by my excessive testing (adding, removing, swapping the memory modules endless times).

anyhow,
so what's the message?

first: be very careful when inserting your memory modules into the slots.
some brands / modules don't have a very robust design, obviously.

second: the scary part is that neither memtest nor windows detected any errors when doing a memory validation.
the only visible symptoms: the physical damage led to sporadic errors (blue screens) during regular operation.
so it's still very difficult to tell whether a memory module is 100% OK or just 99% OK ...
cheers, francoiste

http://www.sevenforums.com/bsod-help-support/190800-solved-random-bsod-around-ntoskrnl-exe-7cc40.html
Relevancy 93.31%

Hi

A few days ago I did a new hardware build and installed W7 64 ultimate. I included a Corsair SSD as my boot drive for the speed advantage.

I have done some investigation and tried to track down the cause of the BSOD but to no avail. Currently they are happening once\ twice or more a day but very erratic so have no confidence in the system at the moment.

I have uploaded dumps of recent crashes in the hope someone here can help.

Anything would be appreciated. Thanks.

A:random BSODs with new build - error related to "ntoskrnl.exe+7cc40"?

Run a RAM test RAM - Test with Memtest86+
Stop any Overclocking if any.

Remove any Avast software, use MSE instead.
Uninstall Asus PC Probe, Smart Doctor, Asus update or any other Asus utilities.

Are you using any old(pre-Vista) software that might not be 64-bit compatible?


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

CRITICAL_STRUCTURE_CORRUPTION (109)
This bugcheck is generated when the kernel detects that critical kernel code or
data have been corrupted. There are generally three causes for a corruption:
1) A driver has inadvertently or deliberately modified critical kernel code
or data. See http://www.microsoft.com/whdc/driver/kernel/64bitPatching.mspx
2) A developer attempted to set a normal kernel breakpoint using a kernel
debugger that was not attached when the system was booted. Normal breakpoints,
"bp", can only be set if the debugger is attached at boot time. Hardware
breakpoints, "ba", can be set at any time.
3) A hardware corruption occurred, e.g. failing RAM holding kernel code or data.
Arguments:
Arg1: a3a039d89c614680, Reserved
Arg2: b3b7465eeede15d6, Reserved
Arg3: fffff80001dfe036, Failure type dependent information
Arg4: 0000000000000001, Type of corrupted region, can be
0 : A generic data region
1 : Modification of a function or .pdata
2 : A processor IDT
3 : A processor GDT
4 : Type 1 process list corruption
5 : Type 2 process list corruption
6 : Debug routine modification
7 : Critical MSR modification

Debugging Details:
------------------
BUGCHECK_STR: 0x109

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: CODE_CORRUPTION

PROCESS_NAME: System

CURRENT_IRQL: 0

LAST_CONTROL_TRANSFER: from 0000000000000000 to fffff80001cd0c40

STACK_TEXT:
fffff880`021c45d8 00000000`00000000 : 00000000`00000109 a3a039d8`9c614680 b3b7465e`eede15d6 fffff800`01dfe036 : nt!KeBugCheckEx
STACK_COMMAND: kb

CHKIMG_EXTENSION: !chkimg -lo 50 -d !nt
fffff80001dfe44d - nt!ExDeferredFreePool+9ed
[ 40:00 ]
1 error : !nt (fffff80001dfe44d)

MODULE_NAME: memory_corruption

IMAGE_NAME: memory_corruption

FOLLOWUP_NAME: memory_corruption

DEBUG_FLR_IMAGE_TIMESTAMP: 0

MEMORY_CORRUPTOR: ONE_BIT

FAILURE_BUCKET_ID: X64_MEMORY_CORRUPTION_ONE_BIT

BUCKET_ID: X64_MEMORY_CORRUPTION_ONE_BIT

Followup: memory_corruption
---------

http://www.sevenforums.com/bsod-help-support/202579-random-bsods-new-build-error-related-ntoskrnl-exe-7cc40.html
Relevancy 92.88%

Randomly happens, sometimes in a game, sometimes when browsing, sometimes when RDP'ed in, sometimes when unattended. No repro steps yet, just be patient and it will happen. Sometimes when it blue screens, it takes the whole network down spamming the switches and router with packets.

A:Random BSODs, error 0x00000124, caused by ntoskrnl.exe

Blue Screen of Death (BSOD) Posting Instructions

http://www.sevenforums.com/bsod-help-support/289877-random-bsods-error-0x00000124-caused-ntoskrnl-exe.html
Relevancy 89.87%

Hi, I've been having this BSOD appear very randomly.

IRQL_NOT_LESS_OR_EQUAL 0x0000000a
(all reports in .rar file)

Sometimes within 1 hour, other times as long as 24hrs+. I've got my BIOS/Drivers up to date for my CPU, Graphics Card, and Motherboard. I've rigorously tested my memory and have never had any issues arise.

It has occurred during
3d gaming,
when the system has been idle,
also when browsing with firefox or ie.

Any help at all would be appreciated, I've struggled with this BSOD for years I would love to finally find whats causing it.

Thank you.

A:BSOD ntoskrnl.exe+26ee0 ntoskrnl.exe+7cc40

  
Quote: Originally Posted by postal


Hi, I've been having this BSOD appear very randomly.

IRQL_NOT_LESS_OR_EQUAL 0x0000000a
(all reports in .rar file)

Sometimes within 1 hour, other times as long as 24hrs+. I've got my BIOS/Drivers up to date for my CPU, Graphics Card, and Motherboard. I've rigorously tested my memory and have never had any issues arise.

It has occurred during
3d gaming,
when the system has been idle,
also when browsing with firefox or ie.

Any help at all would be appreciated, I've struggled with this BSOD for years I would love to finally find whats causing it.

Thank you.


First lets start with asacpi.sys yours dated 2005
1-ASACPI.SYS

The pre 2009 version of this driver is a known BSOD cause.

Please visit this link: ASUS teK Computer Inc. -Support- Drivers and Download P7P55D LE
ASUSTeK Computer Inc. -Support- Drivers and Download P7P55D LE

Scroll down to the Utilities category, then scroll down to the "ATK0110 driver for WindowsXP/Vista/Windows 7 32&64-bit" (it's about the 12th item down).
Download and install it.
Go to C:\Windows\System32\drivers to check and make sure that the ASACPI.SYS file is date stamped from 2009 or 2010 (NOT 2005).

http://www.sevenforums.com/bsod-help-support/194256-bsod-ntoskrnl-exe-26ee0-ntoskrnl-exe-7cc40.html
Relevancy 89.44%

Just today when I got home from work and turned on my PC it started freezing just this morning it was working fine ive had random restarts before but rarely like maybe once or twice a month This problem BSOD 0x00000124 error ntoskrnl.exe, first started out by just freezing can't move mouse or anything holding power button don't work either so have to shut the power switch It now seems to either BSOD or freeze whenever I boot normally and sometimes the BSOD doesnt even make a dmp I either freeze BSOD ntoskrnl.exe, error 0x00000124 BSOD on the welcome screen or after a few min when the desktop comes up Safe mode works fine though as I am also in it now to post this and I have tried system restore to no avail I've tried testing my RAM sticks by moving them to different slots and testing one at a time and still same problem persists One forum mentioned video drivers so i uninstalled mine and still nothing I went to try windows repair but i get some error message saying the utility doesn't match my version not sure why as its the same disc I used to install with I would normally just re-format and install but a few forums mention that not working so I got a little more worried and am now coming to here to see what you guys think I BSOD ntoskrnl.exe, error 0x00000124 read initial post and ran the file collection app and have the zip uploaded One note though the system health report would not work just gave me an error screen maybe because im in safe mode but like I said can't leave it or I will freeze My basic system specs are below thanks for taking the time to read this and hope you can solve it Windows Pro bit got it from my computer courses in college as we part of some partnership with microsoft GB RAM x GB sticks AMD FX -core CPU GHz Nvidia GTX Ti ASUS Sabertooth MB This rig I built in March and ran fine until today Windows I had for over a year same disc just reinstalled

A:BSOD ntoskrnl.exe, error 0x00000124

It does not appear you let the jcgriff2 utility run to completion. It sometimes appears it is not doing anything when it actually is, so do not stop it. Go get a cup of coffee or a meal while you wait.

Analysis:BugCheck 0x124
You have a 0x124 hardware bugcheck. If the system is still under warranty, I would recommend sending it in to have diagnostic tests done and any bad hardware replaced.



   Warning
Before you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. WARNING: The steps that follow can void your warranty!!!

For your hardware stop 0x124 crash, read through Stop 0x124 - what it means and what to try and use the following hardware checks to supplement that link.
If you are overclocking any hardware, please stop.

If you have an SSD, make sure the following are up to date:SSD firmware
BIOS Version
Chipset Drivers
Hard disk controller drivers/SATA drivers
If you have a Marvell IDE ATA/ATAPI device, make sure the drivers are up to date from the Intel site or Marvell site and not from your motherboard/vendor support site.

Run all but the advanced tests with SeaTools for HDDs.SeaTools for Windows

SeaTools for DOS
Monitor temperatures during the following tests. Use the following programs to monitor the temperatures. Real Temp is a good CPU temperature monitor.
Speccy - System Information - Free Download will monitor all hardware temperatures.
HWiNFO, HWiNFO32 & HWiNFO64 - Hardware Information and Analysis Tools can be inaccurate for CPU temperatures, but is a good program for GPU temperature monitoring.
Use FurMark: VGA Stress Test, Graphics Card and GPU Stability Test, Burn-in Test, OpenGL Benchmark and GPU Temperature | oZone3D.Net to test the graphics card GPU. Let it run until the GPU temperatures even out or until the GPU temperatures reach a dangerous level (you can find the max temperature for your card on either the nVidia or AMD sites; if you are not sure, ask us). The goal is to get a steady temperature, find out if the GPU is overheating, or to see if there are any artifacts present in the test itself: look for strange pixelated patterns on the screen or colors that do not look like they belong. Then use the |MG| Video Memory Stress Test 1.7.116 Download to test your graphics card memory. Let the memory test run for at least seven passes; the more the better.

Run Hardware - Stress Test With Prime95 to determine any hardware problems. Run all three tests for a few hours each. If you get errors, stop the test and post back here.

Follow the steps for doing CPU stress test using IntelBurnTest

Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).

For Part 3: If You Have Errors: If you swap any memory components, follow these steps for ESD safety:Shut down and turn off your computer.
Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working. If you do not have an anti-static workbench, desk, or pad, you can use your computer tower/case by finding a metal hold in it, su... Read more

http://www.sevenforums.com/bsod-help-support/239783-bsod-ntoskrnl-exe-error-0x00000124.html
Relevancy 88.58%

Earlier I was Using Windows 7 ultimate X64bit. I had no problem at all. Recently I bought windows 8 pro.
Now I am getting this BSOD ERROR 0x00000124(ntoskrnl.exe+52a489).
No matter what I do .I keep getting this error. i enabled verifier. I Did Scannow through CMD. I cleaned my registry. Even I installed several fresh installation of windows. But No Hope. I Read tons of solution on net but nothing seems to be working. Now my pc is shutting down after 10 or 15 minutes regularly .and every time SAME error. I thought it was my BIOS therefore I revert back to older version(on which I never faced any problem using windows 7). I also installed Windows 7 again but No Hope again. This Rate I'll damage something on my computer. I can't do anything because of this BSOD error.
I am enclosing everything as per forum Rule.
Please Help me. I am in real trouble.

A:BSOD ERROR 0x00000124(ntoskrnl.exe+52a489)

Please some look after it. My pc is crashing after regular events. Is there any other information which I can provide so that you guys can make better explanation that what is going on with my computer.

http://www.eightforums.com/bsod-crashes-debugging/13521-bsod-error-0x00000124-ntoskrnl-exe-52a489.html
Relevancy 87.72%

So I have a problem with this error.

I updated all drivers
Also updated motheboard.
I tested memory with memtest- no errors
Tested hard drive with many programs and no errors or problems.

Do not know what to do. most commonly get this problem when playing games.
But my video drivers are updated with latest updates. CPU temperature and VGA is normal.

OS Microsoft Windows 7 Ultimate
Motherboard ASRock P5B-DE
CPU Type QuadCore Intel Core 2 Quad Q6600, 2400 MHz
VGA ATI Radeon HD 4890 (RV790)
Disk Drive SAMSUNG HD403LJ ATA Device (400 GB, 7200 RPM, SATA-II)
Memory Patriot Memory 4 GB DDR2-667 SDRAM

attaching - system health report,Windows_NT6_BSOD_v3.03, and dump file.

Please help to solve this problem.
Thank you

A:BSOD 0x00000124 error (hal.dll+5ba9 and ntoskrnl.exe+c4085)

You are getting a error that is exclusively linked to bad hardware or a improper overclock.
There really isn't a whole lot of other things that produce the error you are getting.

Stop 0x124 - what it means and what to try


Code:
Probably caused by : hardware

Followup: MachineOwner
---------

1: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 00000000, Machine Check Exception
Arg2: 863d5024, Address of the WHEA_ERROR_RECORD structure.
Arg3: 00000000, High order 32-bits of the MCi_STATUS value.
Arg4: 00000000, Low order 32-bits of the MCi_STATUS value.

Debugging Details:
------------------
BUGCHECK_STR: 0x124_GenuineIntel

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

PROCESS_NAME: System

CURRENT_IRQL: 0

STACK_TEXT:
80eb3cc4 8290b085 863d5008 829a5c08 829a5c00 nt!WheapCreateTriageDumpFromPreviousSession+0x32
80eb3ce4 8290beaf 829a5c00 863d5008 829a5c30 nt!WheapProcessWorkQueueItem+0x56
80eb3d00 828a2153 829a5c00 00000000 85173798 nt!WheapWorkQueueWorkerRoutine+0x1f
80eb3d50 82a2f46a 00000001 a86a2daf 00000000 nt!ExpWorkerThread+0x10d
80eb3d90 828d0979 828a2046 00000001 00000000 nt!PspSystemThreadStartup+0x9e
00000000 00000000 00000000 00000000 00000000 nt!KiThreadStartup+0x19
STACK_COMMAND: kb

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: hardware

IMAGE_NAME: hardware

DEBUG_FLR_IMAGE_TIMESTAMP: 0

FAILURE_BUCKET_ID: 0x124_GenuineIntel_PROCESSOR_BUS_PRV

BUCKET_ID: 0x124_GenuineIntel_PROCESSOR_BUS_PRV

Followup: MachineOwner
---------

http://www.sevenforums.com/bsod-help-support/187966-bsod-0x00000124-error-hal-dll-5ba9-ntoskrnl-exe-c4085.html
Relevancy 87.72%

So I have a problem with this error.

I updated all drivers
Also updated motheboard.
I tested memory with memtest- no errors
Tested hard drive with many programs and no errors or problems.

Do not know what to do. most commonly get this problem when playing games.
But my video drivers are updated with latest updates. CPU temperature and VGA is normal.

OS Microsoft Windows 7 Ultimate
Motherboard ASRock P5B-DE
CPU Type QuadCore Intel Core 2 Quad Q6600, 2400 MHz
VGA ATI Radeon HD 4890 (RV790)
Disk Drive SAMSUNG HD403LJ ATA Device (400 GB, 7200 RPM, SATA-II)
Memory Patriot Memory 4 GB DDR2-667 SDRAM

attaching - system health report,Windows_NT6_BSOD_v3.03, and dump file.

Please help to solve this problem.
Thank you

A:BSOD 0x00000124 error (hal.dll+5ba9 and ntoskrnl.exe+c4085)

How long did you run memtest86+? It should be at least 7 passes.

Though I doubt the memory is the case. All crashes show an issue regarding CPU's L0 internal bus. You may wanna run Prime95 for about 9+ hours. If it shows up errors, or crashes, you can bet you have an issue with your CPU. I'm not sure what temps you have on it that are 'normal', but they might be too high; don't forget that overclocking it will cause this issue as well. The consistency leads me to believe the CPU itself is just bad, as OCing or temp problems typically lead to erratic CPU probs, but it really depends. Best to check with Prime95 first.

http://www.techsupportforum.com/forums/f299/bsod-0x00000124-error-hal-dll-5ba9-and-ntoskrnl-exe-c4085-602013.html
Relevancy 87.72%

Have received this BSOD several times while the machine has been in Sleep Mode. Normal operation is to turn the monitor off and put the computer into that mode during the night. The BSOD is the normal DRIVER_POWER_STATE_FAILURE ntoskrnl.exe caused by address ntoskrnl.exe+7cc40.

Desktop Computer less than a year old. OEM version of Win7 Pro 64-bit pre-installed at time of purchase. Just updated computer info for this machine.,
Uploaded Health Report.html and a Windows_NT6_BSOD_v3.03_jcgriff2_.exe.zip. Did not see the Health Report upload so I redid it as a zip file.
If I missed anything, please let me know. Really do appreciate your help to resolve this. Have not had a BSOD at any other time than at Sleep Mode to the best of my knowledge.

The 031712-109263-01 is the zip of my minidump file on the day of the event.

A:BSOD ntoskrnl.exe+7cc40

You uploaded the application instead of the data.
Try this method.

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

If you are overclocking STOP

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.



To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

http://www.sevenforums.com/bsod-help-support/219840-bsod-ntoskrnl-exe-7cc40.html
Relevancy 87.72%

Hi I have a new rig i built my self and it runs perfectly except the occasional BSOD and i cant for the life of me work out why - - dmp BAD POOL HEADER x fffff a a ff af a a fffff a a ntoskrnl exe ntoskrnl exe cc NT Kernel amp System Microsoft Windows Operating System Microsoft Corporation win sp gdr - x ntoskrnl exe cc C Windows Minidump - - dmp - - dmp PAGE FAULT IN NONPAGED AREA x fffffa fffff b d ntoskrnl exe ntoskrnl exe cc NT Kernel amp System Microsoft Windows Operating System Microsoft Corporation win BSOD's ntoskrnl.exe+7cc40 sp gdr - x ntoskrnl exe cc C Windows Minidump - - dmp - - dmp KMODE EXCEPTION NOT HANDLED x e ntoskrnl exe ntoskrnl exe cc NT Kernel amp System Microsoft Windows Operating System Microsoft Corporation win sp gdr - x ntoskrnl exe cc C Windows Minidump - - dmp Basically i bought one of the affected mother boards before the b revision for sandy bridge systems I managed to get an updated mobo via RMA So i changed mother boards ntoskrnl.exe+7cc40 BSOD's over Then a few weeks later i changed my RAM old was Corsair XMS mhz gb new is Corsair Vengeance mhz ntoskrnl.exe+7cc40 BSOD's gb I also started off with a F Corsair ssd gb and change dthat to a new force gb ssd Since i reinstalled my OS win x i keep getting BSOD's I have formatted and reinstalled and the same happens Please any assistance would be greatly appreciated Attached my minidump folder Thanks in advance

A:ntoskrnl.exe+7cc40 BSOD's

  
Quote: Originally Posted by Kristofaaa


Hi,

I have a new rig i built my self and it runs perfectly except the occasional BSOD and i cant for the life of me work out why...

091711-6006-01.dmp 17/09/2011 21:33:23 BAD_POOL_HEADER 0x00000019 00000000`00000003 fffff8a0`1205a820 ff8af8a0`1205a820 fffff8a0`1205a820 ntoskrnl.exe ntoskrnl.exe+7cc40 NT Kernel & System Microsoft? Windows? Operating System Microsoft Corporation 6.1.7601.17640 (win7sp1_gdr.110622-1506) x64 ntoskrnl.exe+7cc40 C:\Windows\Minidump\091711-6006-01.dmp 8 15 7601 293,064

091311-5896-01.dmp 13/09/2011 18:56:14 PAGE_FAULT_IN_NONPAGED_AREA 0x00000050 fffffa80`55685460 00000000`00000001 fffff880`06b9d316 00000000`00000005 ntoskrnl.exe ntoskrnl.exe+7cc40 NT Kernel & System Microsoft? Windows? Operating System Microsoft Corporation 6.1.7601.17640 (win7sp1_gdr.110622-1506) x64 ntoskrnl.exe+7cc40 C:\Windows\Minidump\091311-5896-01.dmp 8 15 7601 291,016

091311-7722-01.dmp 13/09/2011 13:40:14 KMODE_EXCEPTION_NOT_HANDLED 0x0000001e 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 ntoskrnl.exe ntoskrnl.exe+7cc10 NT Kernel & System Microsoft? Windows? Operating System Microsoft Corporation 6.1.7601.17640 (win7sp1_gdr.110622-1506) x64 ntoskrnl.exe+7cc10 C:\Windows\Minidump\091311-7722-01.dmp 8 15 7601 288,232

Basically i bought one of the affected mother boards before the b3 revision for sandy bridge systems. I managed to get an updated mobo via RMA.

So i changed mother boards over. Then a few weeks later i changed my RAM, old was Corsair XMS 1600mhz 4gb, new is Corsair Vengeance 1866mhz 8gb.

I also started off with a F60 Corsair ssd 60gb and change dthat to a new force 3 120gb ssd.

Since i reinstalled my OS (win 7 x64) i keep getting BSOD's. I have formatted and reinstalled and the same happens.

Please any assistance would be greatly appreciated...

Attached my minidump folder...

Thanks in advance.


Easy, these were related to your C-media Audio driver. I would update to the newest version below.

C-Media Electronics, Inc.


Since pool corruption was involved I would run these two tests.
1-Memtest.

*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program.

*Boot from the CD, and leave it running for at least 6 or 8 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

RAM - Test with Memtest86+

2-Driver verifier






Quote:
I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wai... Read more

http://www.sevenforums.com/bsod-help-support/187229-ntoskrnl-exe-7cc40-bsods.html
Relevancy 87.72%

Im getting massive BSOD's every day. I can't even use this computer most hours and it'll probably BSOD in a few minuetes.

Could someone look at the txt file I included and point me in the right direction? Or if I need more info please tell me!!! Because Im going crazy with this BSOD.

A:BSOD ntoskrnl.exe 7cc40

Please follow this post and reply accordingly.

http://www.sevenforums.com/crashes-d...tructions.html

http://www.sevenforums.com/bsod-help-support/221428-bsod-ntoskrnl-exe-7cc40.html
Relevancy 86.86%

Hello everybody I just have this custom PC BSOD hal.dll+12a3b x64, error Windows 0x00000124 ntoskrnl.exe+748c0 for Home use I have used it around a month The PC had worked very good but weeks ago my wife had to use it for children's homework Just when she logged into her user account the BSOD appeared after around seconds the BSOD disappeared an the PC automatically restarted So she was into this loop until I told her to force shut down When I was home I ran Windows into Safe Mode and there everything was ok I thought it could BSOD Windows x64, error 0x00000124 hal.dll+12a3b ntoskrnl.exe+748c0 be a problem of RAM memory or maybe a faulty HDD I tested the RAM for about minutes and everything was ok tested the HDD with HD Sentinel software all the tests were perfect SMART indicators are also OK as expected of a nearly new HDD I think its a problem of drivers the PC has BSOD Windows x64, error 0x00000124 hal.dll+12a3b ntoskrnl.exe+748c0 a ZOGIS GT- Pci-Ex card but the mainboard Gygabyte B M-D V has its own Video Chip that is disabled on the BIOS Then I disabled the Pci-Ex and enabled the internal Video card but the result was the same BSOD Other peripherals used are a Genius USB Facecam and an EPSON L printer both are now BSOD Windows x64, error 0x00000124 hal.dll+12a3b ntoskrnl.exe+748c0 disconnected of the PC Please let me know what more can I do or how to test the drivers I will post any news here Thanks for your help in advance

A:BSOD Windows x64, error 0x00000124 hal.dll+12a3b ntoskrnl.exe+748c0

Basically a 0x00000124 is a hardware issue; but it may be caused by anything and everything associated with the computer.

The crash dumps provide very less information in the 0x00000124 dumps. And there is only one crash dump which is unfortunately having symbol error and so I failed to read it properly.

Anyway, a single BSOD may always be treated as a glitch. If the issue continues, let us see the further dumps ... if they provide any little more info there.

http://www.sevenforums.com/bsod-help-support/374407-bsod-windows-x64-error-0x00000124-hal-dll-12a3b-ntoskrnl-exe-748c0.html
Relevancy 86.86%

So been having recurring Bluescreens for a long time. They went away after I reduced the overclock as they were usually hal.dll errors but now I am getting ntoskrnl.exe errors. Any help?

A:BSOD when playing games, error 0x00000124, ntoskrnl.exe+14dca0

Edit: Could it be my GPU because the Core Clock was 50Hz higher than default?

My CPU is also overclocked but shouldn't be the problem I think

http://www.sevenforums.com/bsod-help-support/328583-bsod-when-playing-games-error-0x00000124-ntoskrnl-exe-14dca0.html
Relevancy 86.43%

The BSODs appear random - eg once during surfing with IE9, another time while using Photoshop. BSODs not regular or often - maybe once a fortnight - but seemingly completely unpredictable.

MemTest run (just for an hour) didn't show up any problems.

I'd be grateful for a steer on what can be causing the BSODs.

Thanks

A:Intermittent BSOD ntoskrnl.exe (nt+7cc40)

  
Quote: Originally Posted by Davidc2


The BSODs appear random - eg once during surfing with IE9, another time while using Photoshop. BSODs not regular or often - maybe once a fortnight - but seemingly completely unpredictable.

MemTest run (just for an hour) didn't show up any problems.

I'd be grateful for a steer on what can be causing the BSODs.

Thanks


Easy, your Symantec is causing memory corruption. Remove and replace with Microsoft Security Essentials
ftp://ftp.symantec.com/public/englis...moval_Tool.exe
Virus, Spyware & Malware Protection | Microsoft Security Essentials

http://www.sevenforums.com/bsod-help-support/192323-intermittent-bsod-ntoskrnl-exe-nt-7cc40.html
Relevancy 86.43%

For two BSOD every ntoskrnl.exe+7cc40 time weeks I am getting or times a day the same BSOD with ntoskrnl exe cc with my Dell z Mostly it happens when I am not working on the computer But also it happens during my work BSOD every time ntoskrnl.exe+7cc40 but I did not notice a real pattern My computer is a Dell z of months old bits My Windows Home Premium was installed by Dell And I have updated it normally Service Pack I also use System Mechanic The only strange thing I notice already for a long time before the BSOD happened the first time that the computer does not go to sleep when it is not on battery but stays alive including the screen the whole night Or when it is on battery the next morning there is no energy any more But I don't know if there is any connection Of course I changed the settings many times but no effect Attached the files the way it was asked I really hope someone can give me a direction the find the solution Thank you in advance from Amsterdam Holland Topdognl

A:BSOD every time ntoskrnl.exe+7cc40

These were Related to NETwNs64.sys Wireless WiFi Link Driver from Intel Corporation. I would re-install the newest version available.

http://www.sevenforums.com/bsod-help-support/210952-bsod-every-time-ntoskrnl-exe-7cc40.html
Relevancy 86.43%

10 days ago i have BSOD frequently. Even when the computer rest appears suddenly a blue screen. SOmetimes when i navigate on Internet.
I have to types of BSOD:
IRQL_NOT_LESS_OR_EQUAL caused by the adress ntoskrnl.exe+7cc40
BSOD caused by hal.dll+12a3b
My OS is Win7 Home Premium SP1. I send you the report of BlueScreenView with more details.
Could you tell me please some advice?
Thank you very much

A:BSOD IRQL_NOT_LESS_OR_EQUAL ntoskrnl.exe+7cc40

NOTE: Please provide the following information for a more detailed response: http://www.techsupportforum.com/foru...ta-452654.html

While waiting for a reply:

I suggest starting all troubleshooting with the following diagnostic tests (located at this link: Hardware Diagnostics ). They'll save you a lot of time and heartache if there is a hardware failure, and you'll have the disks on hand in case you need them in the future:

Quote:




H/W Diagnostics:
Please start by running these bootable hardware diagnostics:
Memory Diagnostics (read the details at the link)
Hard Drive Diagnostics (read the details at the link) - Test ALL of the hard drives.

Also, please run one of these free, independent online malware scans to ensure that your current protection hasn't been compromised: Free Online AntiMalware Resources (read the details at the link)
There are also free, bootable antivirus disks at this link: Free Online AntiMalware Resources - Bootable Disks




Also, please run Driver Verifier according to these instructions: Driver Verifier Settings

http://www.techsupportforum.com/forums/f299/bsod-irql_not_less_or_equal-ntoskrnl-exe-7cc40-633924.html
Relevancy 86.43%

hi here is the issue about two weeks ago Windows BSOD 7 ntoskrnl.exe+7cc40 - I took my laptop to the service because its disk drive not seeing any cd or dvd than they changed it with a new one after that they said we updated the bios after or days later BSOD Windows 7 - ntoskrnl.exe+7cc40 I'm on the Internet I got blue screen error driver power state failure I tried to update some of my driver such as graphic driver and tried to update windows it did't work third crash happened when I was trying to model something I opened the program at the same time rhino solid dsmax last crash was happened this morning when I was trying to restart my computer it says closing the pc but after - minutes later it crashes in addition my laptop opens very slowly than usual Some information about the crash Sorunlu Olay Ad BlueScreen OS S r m Yerel Kimlik BCCode f BCP BCP FFFFFA DA BCP FFFFF BA BCP FFFFFA E B OS Version Service Pack Product I check my pc with bluescreenview it says ntoskrnl cc error but don't know what to do and sorry for my bad English I really need your help Thank you in advance

A:BSOD Windows 7 - ntoskrnl.exe+7cc40

Welcome aboard, Brabbit.

Fresco Logic xHCI (USB3) Device Driver is initially identified as the cause of the crash.

Code:
Irp is active with 4 stacks 3 is current (= 0xfffffa8005e36410)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace. Pending has been returned
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 16, 0] 0 0 fffffa800667da10 00000000 00000000-00000000
\Driver\pci
Args: 00000000 00000000 00000000 00000005
>[ 16, 2] 0 e1 fffffa800860dac0 00000000 fffff800032e31b0-fffffa800e4492c0 Success Error Cancel pending
Unable to load image \SystemRoot\system32\DRIVERS\FLxHCIc.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for FLxHCIc.sys
*** ERROR: Module load completed but symbols could not be loaded for FLxHCIc.sys
\Driver\FLxHCIc nt!PopSystemIrpCompletion
Args: 00016600 00000000 00000006 00000005
[ 0, 0] 0 0 00000000 00000000 00000000-fffffa800e4492c0

Args: 00000000 00000000 00000000 00000000
And, the driver is very old.

Code:
start end module name
fffff880`049a5000 fffff880`049f5000 FLxHCIc T (no symbols)
Loaded symbol image file: FLxHCIc.sys
Image path: \SystemRoot\system32\DRIVERS\FLxHCIc.sys
Image name: FLxHCIc.sys
Timestamp: Thu Feb 24 14:29:52 2011 (4D661E08)
CheckSum: 0004C3F2
ImageSize: 00050000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
You try to update it from FRESCO LOGIC INC.===Leap into SuperSpeed===.

The Device Object of the blocked IRP is really interesting.

Code:
Device object (fffffa800860dac0) is for:
InfoMask field not found for _OBJECT_HEADER at fffffa800860da90
\Driver\FLxHCIc DriverObject fffffa8008668910
Current Irp 00000000 RefCount 0 Type 00000022 Flags 00002050
DevExt fffffa8008af1370 DevObjExt fffffa800860dc30
ExtensionFlags (0000000000)
Characteristics (0x00000100) FILE_DEVICE_SECURE_OPEN
AttachedTo (Lower) fffffa800667d7f0*** WARNING: Unable to verify timestamp for ACPI.sys
*** ERROR: Module load completed but symbols could not be loaded for ACPI.sys
Unable to load image \SystemRoot\System32\Drivers\sptd.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for sptd.sys
*** ERROR: Module load completed but symbols could not be loaded for sptd.sys
\Driver\ACPI
Device queue is not busy.
Daemon Tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known BSOD causer. Uninstall the program at first. Then download SPTD standalone installer from Disk-Tools.com, and execute the downloaded file as guided below :
Double click to open it.
Click this button only:

If it is grayed out, as in the picture, there is no more SPTD in your system, and you just close the window.
From another crash dump, that is alos a stop 0x9F; showing a different crasher. Atheros Bluetooth Driver.

Code:
Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 e1 fffffa8009de5030 00000000 00000000-00000000 pending
Unable to load image \SystemRoot\system32\DRIVERS\btfilter.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for btfilter.sys
*** ERROR: Module load completed but symbols could not be loaded for btfilter.sys
\Driver\BtFilter
Args: 00000000 00000001 00000001 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-fffffa800ec5dc90

Args: 00000000 00000000 00000000 00000000
Update it from ATHEROS drivers for Microsoft Windows (Atheros?????).

Apparently there are no other errors, but as the system is crashing, you should pay attention to these suggestions, too.

Free up the startup.
Click on the Start button
Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the “Sta... Read more

http://www.sevenforums.com/bsod-help-support/273475-bsod-windows-7-ntoskrnl-exe-7cc40.html
Relevancy 86.43%

Greetings Here is the issue About mid December I began having problems with 7 ntoskrnl.exe+7cc40 Windows BSOD - random BSOD's The initial tell-tale signs led to numerous issues I began slowly eliminating causes until I was left with Re-Installing Windows Since then I have had the same issues over and over again Here BSOD Windows 7 - ntoskrnl.exe+7cc40 are the corrective actions I have taken thus far from most recent to windows install In Bios I manually set timing of RAM to manufacture's recommendations from Website Identified and removed bad RAM Verified remaining RAM with hours of Memtest passed defects Replaced Motherboard M A T USB Used known functional video card uninstalled driver of old card before install Tested computer with each stick of RAM using different slots Clean installed windows ---- I included all dump files in the zip file since install but the last - are after the new motherboard and the last are after the verified RAM The very last dump was recorded using Driver Verifier I will continue to stress test my machine with driver verifier and post the dump files as I get them I am going on months and if this doesn't get fixed soon I'm trying a hammer lol

A:BSOD Windows 7 - ntoskrnl.exe+7cc40

As Promised:

Driver Verifier enabled as directed and ran it into the ground.

Seem to be alot of views... Is my problem common or just scaring away the Gurus?

Here are a few things I have tried.

Rolled back AMD driver to last version, Crashed.

Removed all peripherals except USB keyboard and Mouse and monitor.

Ran GPUZ through a crash. Log attached.

I will be going to Saphire's site and downloading any driver they have listed there for my Video Card (Radeon HD 6850)

Please help if you can.

http://www.sevenforums.com/bsod-help-support/214051-bsod-windows-7-ntoskrnl-exe-7cc40.html
Relevancy 85.57%

So it went a way for two weeks when error 0x00000124, (5logs) ntoskrnl.exe+153fa0 playing BSOD games, my blue screen errors and now reappearing again I've ran memtest prime and furmark and all passed Here is an analysis of one of the logs from OSR Online Analysis Code TRIAGER Could not open triage file e dump analysis program triage modclass ini error BUGCHECK STR x GenuineIntel CUSTOMER CRASH BSOD when playing games, error 0x00000124, ntoskrnl.exe+153fa0 (5logs) COUNT DEFAULT BUCKET ID WIN DRIVER FAULT PROCESS NAME chrome exe CURRENT BSOD when playing games, error 0x00000124, ntoskrnl.exe+153fa0 (5logs) IRQL f STACK TEXT ffffd e cf nt KeBugCheckEx STACK COMMAND kb FOLLOWUP NAME MachineOwner MODULE NAME GenuineIntel IMAGE NAME GenuineIntel DEBUG FLR IMAGE TIMESTAMP FAILURE BUCKET ID X x GenuineIntel PROCESSOR CACHE BUCKET ID X x GenuineIntel PROCESSOR CACHE Followup MachineOwner In all of the logs it refers to Genuine Intel so I'm guessing it's the CPU problem Any more help anyone can give It's overclocked but has been for weeks working fine and all of a sudden these issues BSOD when playing games, error 0x00000124, ntoskrnl.exe+153fa0 (5logs) started to arise Build Intel i - k Kingston Hyper X GB x GB Modules AMD R - x Asus Z -a Corsair TX v Samsung Pro Series GB SSD TB Western Digital Blue HDD OS is on SSD Any help

A:BSOD when playing games, error 0x00000124, ntoskrnl.exe+153fa0 (5logs)

Can no one help me?

http://www.sevenforums.com/bsod-help-support/330615-bsod-when-playing-games-error-0x00000124-ntoskrnl-exe-153fa0-5logs.html
Relevancy 85.57%

HI my name is banby and i'm using this computer:

manufacturer: Dell
model :inspiron 570
processor : AMD ATHLON(TM) IIx2 250 processor 3.00 GHz
installed memory(RAM):4.00 GB (3.75 GB usable)
also, i'm using a windows 7 home premium sp1 64 bit.
well, since 2 months my computer is shutting down unexpectly and a blue screen appear.sometimes it happens 3 to 4 times a day. After researches in minidump repports,i found a that it was due to

*msahci.sys
*ntoskrnl.exe ...
now,i'm confused i don't know what to do to fix this issue
i also collected reports with sf diagnostic tool that i submitted with this post
thank you to help me

A:frequent BSOD on my computer due to ntoskrnl.exe+7cc40

Welcome aboard, banby.

► A lot of problem creators are there
Catalyst Control Center
Norton AntiVirus ; replace by Microsoft Security Essentials - Free Antivirus for Windows
PC Tools Registry Mechanic
Roxio Creator Starter
WinUtilities
Wise Care 365
► Some Dell Junks are also present there. Remove them up too.

Clean Up Factory Bloatware
► Free up the startup.

Click on the Start button
Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the “Startup” tab.
Deselect all items other than the antivirus.
Apply > OK
Accept the restart.
► Finally, Your crash dumps are not showing any finite probable cause. In such a situation, it is better to enable Driver Verifier to monitor the drivers.

Driver Verifier - Enable and Disable

Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

Let us know the results, with the subsequent crash dumps, if any.

http://www.sevenforums.com/bsod-help-support/255609-frequent-bsod-my-computer-due-ntoskrnl-exe-7cc40.html
Relevancy 85.57%

Hello! I've been recieving reoccurring BSODs from 3d gaming. BlueScreenView reports that I've been getting ntoskrnl+7cc40. The bug check string is usually DRIVER_IRQL_NOT_LESS_OR_EQUAL, IQRL_NOT_LESS_OR_EQUAL, PAGE_FAULT_IN_NON_PAGED_AREA, and KMODE_EXCEPTION_NOT_HANDLED. I have tried updating all of my drivers, sfc /scannow, and chkdsk. None seems to work. I'm running a HP Pavilion dv4-2145dx, that's about 2-3 years old.

Specs:
- Windows 7 Home Premium 64bit (OEM)
- AMD Turion(tm) II Dual-Core Mobile M520
- ATI Mobility Radeon 4200 Series
- 4gb ram

attached is my bsod dmp and system file collection
Please help! thanks in advance!

A:Constant BSOD from 3d gaming, ntoskrnl+7cc40

Possible out of date drivers:
Code:
iirsp fffff880`01558000 fffff880`01569000 Tue Dec 13 14:47:54 2005 (439f418a) 00019fb9 iirsp.sys
nfrd960 fffff880`016cf000 fffff880`016df000 Tue Jun 06 15:11:48 2006 (4485ef94) 0000ffcb nfrd960.sys
adpu320 fffff880`01200000 fffff880`0122f000 Tue Feb 27 17:04:15 2007 (45e4c6ff) 0003588d adpu320.sys
adpahci fffff880`01397000 fffff880`013ed000 Tue May 01 11:30:09 2007 (46377921) 00058e0f adpahci.sys
arc fffff880`0149d000 fffff880`014b6000 Thu May 24 15:27:55 2007 (4656035b) 00017fb4 arc.sys
SiSRaid2 fffff880`019dd000 fffff880`019eb000 Wed Sep 24 12:28:20 2008 (48da86c4) 00011d5d SiSRaid2.sys
sisraid4 fffff880`01800000 fffff880`01818000 Wed Oct 01 15:56:04 2008 (48e3f1f4) 0001ec6b sisraid4.sys
adp94xx fffff880`0131c000 fffff880`01397000 Fri Dec 05 16:54:42 2008 (4939bf42) 0007c740 adp94xx.sys
lsi_fc fffff880`01569000 fffff880`01588000 Tue Dec 09 15:46:09 2008 (493ef531) 0001dc09 lsi_fc.sys
arcsas fffff880`014b6000 fffff880`014d1000 Wed Jan 14 12:27:37 2009 (496e3ca9) 0001f176 arcsas.sys
ql2300 fffff880`01839000 fffff880`019dd000 Thu Jan 22 16:05:06 2009 (4978fba2) 0017acdb ql2300.sys
vsmraid fffff880`01769000 fffff880`01793000 Fri Jan 30 18:18:57 2009 (4983a701) 00028def vsmraid.sys
elxstor fffff880`014d1000 fffff880`01558000 Tue Feb 03 15:52:11 2009 (4988ca9b) 0008214f elxstor.sys
stexstor fffff880`01818000 fffff880`01822000 Tue Feb 17 16:03:36 2009 (499b4248) 0000b026 stexstor.sys
hamachi fffff880`047f5000 fffff880`04800000 Thu Feb 19 03:36:41 2009 (499d3639) 0000a5d7 hamachi.sys
amdsbs fffff880`0144b000 fffff880`01492000 Fri Mar 20 12:36:03 2009 (49c3e213) 0003938a amdsbs.sys
lsi_scsi fffff880`0159b000 fffff880`015ba000 Thu Apr 16 16:13:50 2009 (49e7ad9e) 0002a7b5 lsi_scsi.sys
HpqKbFiltr fffff880`04a7f000 fffff880`04a8b000 Wed Apr 29 07:48:30 2009 (49f85aae) 00006ec8 HpqKbFiltr.sys
AtiPcie fffff880`02050000 fffff880`02058000 Tue May 05 09:00:22 2009 (4a005486) 000134c7 AtiPcie.sys
Apfiltr fffff880`04400000 fffff880`0443f000 Tue May 12 03:38:59 2009 (4a0943b3) 0003ca71 Apfiltr.sys
GEARAspiWDM fffff880`04a46000 fffff880`04a53000 Mon May 18 06:17:04 2009 (4a1151c0) 000159b4 GEARAspiWDM.sys
lsi_sas fffff880`01033000 fffff880`01050000 Mon May 18 18:20:23 2009 (4a11fb47) 000230a6 lsi_sas.sys
lsi_sas2 fffff880`01588000 fffff880`0159b000 Mon May 18 18:31:48 2009 (4a11fdf4) 0002002e lsi_sas2.sys
megasas fffff880`015ba000 fffff880`015c6000 Mon May 18 19:09:46 2009 (4a1206da) 000169a1 megasas.sys
ql40xx fffff880`0170a000 fffff880`01769000 Mon May 18 19:18:11 2009 (4a1208d3) 00029201 ql40xx.sys
MegaSR fffff880`0162b000 fffff880`016cf000 Mon May 18 19:25:54 2009 (4a120aa2) 00052e51 MegaSR.sys
Rt64win7 fffff880`04a0d000 fffff880`04a46000 Fri May 22 08:52:30 2009 (4a16bc2e) 00041606 Rt64win7.sys
enecir fffff880`045d9000 fffff880`045f6000 Sun Jun 28 20:17:30 2009 (4a48243a) 00019675 enecir.sys
iirsp.sys
nfrd960.sys
adpu320.sys
adpahci.sys
arc.sys
SiSRaid2.sys
sisraid4.sys
adp94xx.sys
lsi_fc.sys
arcsas.sys
ql2300.sys
vsmraid.sys
elxstor.sys
stexstor.sys
hamachi.sys
amdsbs.sys
lsi_scsi.sys
HpqKbFiltr.sys
AtiPcie.sys
Apfiltr.sys
GEARAspiWDM.sys
lsi_sas.sys
lsi_sas2.sys
megasas.sys
ql40xx.sys
MegaSR.sys
Rt64win7.sys
enecir.sys



Code:

Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [D:\Kingston\BSODDmpFiles\Vimicry\Windows7_Vista_jcgriff2\030712-31340-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Machine Name:
Kernel base = 0xfffff800`03257000 PsLoadedModuleList = 0xfffff800`0349c670
Debug session t... Read more

http://www.sevenforums.com/bsod-help-support/218102-constant-bsod-3d-gaming-ntoskrnl-7cc40.html
Relevancy 85.57%

Hello I must admit I'm completely almost always BSOD, by multiple caused ntoskrnl.exe+7cc40 lost by now and need help The problem is I have this notebookl HP multiple BSOD, almost always caused by ntoskrnl.exe+7cc40 G -b SA Notebook PC Product Specifications HP G -b SA Notebook PC - HP Customer Care United States - English HP G -b SA and I'm getting random BSODs at completely random times Usually is happens after cold start I think I've tried everything hardware-related Memtest h test is ok hdd seems ok too SMART and HDtune machina was in servise center and they replaced mainboard But BSODs are still bumping up I'm running W Home Premium retail multiple BSOD, almost always caused by ntoskrnl.exe+7cc40 version hdd was wiped clean few moths ago so there are no HP quot goodies quot left From what I was able to find it seems like some sort of driver-memory related problem but right now I have no idea what to look for Also service center says in short quot hardware ok must be something in software you are using quot

A:multiple BSOD, almost always caused by ntoskrnl.exe+7cc40

I do not see any really questionable software. K-Lite could cause problems if it was corrupted; codec packages are somewhat worrisome when they get corrupted. Other than that, nothing out of the ordinary.

I did see an out of date driver: netr28x.sys which is your Ralink RT2860 series Wireless LAN Card (you may have a different manufacturer). Download the updated driver from the HP Support site, and use the following steps to re-install the update:

First, download the latest driver. Then do the next steps.
Click Start Menu
Right Click My Computer/Computer
Click Manage
Click Device Manager from the list on the left
Find the device you are trying to uninstall by expanding the appropriate set of devices
Right click the device
Click Uninstall (do not click OK in the dialog box that pops up after hitting Uninstall)
Put a tick in Delete driver software for this device (if this option is available, otherwise just hit OK) and hit OK
Restart your computer only if Windows asks you to.
Install the latest driver for the device.

Alternatively:Login as an adminstrative user.
First, download the latest driver. Then do the next steps.
Click Start Menu
Click Control Panel
Click Hardware and Sound
Click Device Manager (the last link under Devices and Printers)
Find the device you are trying to uninstall by expanding the appropriate set of devices
Right click the device
Click Uninstall (do not click OK in the dialog box that pops up after hitting Uninstall)
Put a tick in Delete driver software for this device (if this option is available, otherwise just hit OK) and hit OK
Restart your computer only if Windows asks you to.
Install the latest driver for the device.
Also, some of your crashes are indicating hard disk related problems. It may just be hard disk corruption, or maybe your hard disk was disconnected during transit.

The first thing to check is whether the hard disk is physically connected to the motherboard properly. To do so:Shut down and turn off the computer
Remove the AC Adapter
Remove the battery
Hold down the power button for 15-30 seconds to close the circuit and drain any residual power
Remove the panel on the underside of the laptop where the hard disk is housed
Remove and re-insert the hard disk by sliding it away from the connector and then gently but firmly pressing it back into the connector (no screws should need to be removed to do this step)
Replace the panel on the underside of the laptop to cover the hard disk
Replace the battery
Replace the AC Adapter
Turn on the computer and see how it responds
Post back once these steps have been implemented whether the system is stable. Sometimes these crashes can occur due to a loose connection.
Then run Disk Check with Automatically fix file system errors checked.

http://www.sevenforums.com/bsod-help-support/236905-multiple-bsod-almost-always-caused-ntoskrnl-exe-7cc40.html
Relevancy 85.57%

Dear All,

i have problem with my computer. From time to time appears BSOD. I attached few minidumps, and please analyze it. I tried to open them in BlueScreenViewer and all of them are related to ntoskrnl.exe as i wrote in title.

This is my configuration:
Seagate 1 TB Barracuda 7200.12 (32MB, Serial ATA III)
Radeon 6850 XFX 1GB 2xDVI&HDMI&DP (PCI-E)
Intel Core i5 2500K 3,30 GHz BOX
Corsair CMPSU-800GEU - 800W
Microsoft Windows 7 Home Premium PL OEM 64Bit SP1
Gigabyte GA-H67MA-UD2H-B3
GoodRam DDR3 4GB 1333MHz CL9
CoolerMaster Elite 310 Black-Orange - bez zasilacza
Logitech Wireless Desktop MK320
LG SuperMulti DVD+/-RW GH22NS40 bulk black (bez oprogramowania)

Any ideas?

Thank Yoy in advance

Damian

A:BSOD, ntoskrnl.exe+7cc40, appears randomly.

Two issues

1-sptd.sys

Please remove any CD visualization programs such as Daemon Tools and Alcohol 120%.

They use a driver, found in your dmp, called sptd.sys, that is notorious for causing BSODs.

Use this SPTD uninstaller DuplexSecure - Downloads DuplexSecure - FAQ

when you're done you can use this Freeware:

MagicISO Virtual CD/DVD-ROM (MagicDisc) in its place

Using MagicISO to create ISO image files

2- 3 year old ESET smart security. This is the cause of at least the ones in march, and Feb. Update to current version. If you still are crashing remove it to test.

http://www.sevenforums.com/bsod-help-support/219993-bsod-ntoskrnl-exe-7cc40-appears-randomly.html
Relevancy 85.57%

I've had half a dozen crashes since December that I can easily reproduce when attempting to copy BSOD ntoskrnl.exe+7cc40 copying files, large amounts of data hundreds of GB BSOD copying files, ntoskrnl.exe+7cc40 between non-OS drives Bug check code is usually x a IRQL NOT LESS OR EQUAL but I've also seen x NTFS FILE SYSTEM and x c DRIVER CORRUPTED EXPOOL The crash happens randomly during the copy process sometimes very quickly and other times only after a half hour or more Dumps are attached and debugger analyses for the most recent crashes have been copied below I thought I had a memory leak because file copy operations always consumed all GB of physical memory installed but it turns out I did not have swap files set for my non-OS drives I setup swap files this morning which reduced physical memory use during data transfer from GB to GB but still ended up with a BSOD despite this fix I've had BSODs when using windows shell to copy or a freeware utility syncback I've also had BSODs when trying to copy over a network to a non-OS drive I'm not running any quirky security software MSE Comodo Firewall My rig is overclocked CPU-Z Validator but stable hours prime all intel burn tests memtest for hours etc See http img imageshack us img bstability png SFC scannow reports nothing Disk check has not reported errors Ideas Code Microsoft R Windows Debugger Version AMD Copyright c Microsoft Corporation All rights reserved Loading Dump File C Windows Minidump - - dmp Mini Kernel Dump File Only registers and stack trace are available Symbol search path is SRV C Symbols http msdl microsoft com download symbols Executable search path is C Windows System Windows Kernel Version Service Pack MP procs Free x Product WinNt suite TerminalServer SingleUserTS Built by amd fre win sp gdr - Machine Name Kernel base xfffff a PsLoadedModuleList xfffff f Debug session time Tue Feb UTC - System Uptime days Loading Kernel Symbols Loading User Symbols Loading unloaded module list Bugcheck Analysis Use analyze -v to get detailed debugging information BugCheck A a fffff f Probably caused by memory corruption nt MiRestoreTransitionPte Followup MachineOwner --------- kd gt analyze -v Bugcheck Analysis IRQL NOT LESS OR EQUAL a An attempt was made to access a pageable or completely invalid address at an interrupt request level IRQL that is too high This is usually caused by drivers using improper addresses If a kernel debugger is available get the stack backtrace Arguments Arg a memory referenced Arg IRQL Arg bitfield bit value read operation write operation bit value not an execute operation execute operation only on chips which support this level of status Arg fffff f address which referenced memory Debugging Details ------------------ WRITE ADDRESS GetPointerFromAddress unable to read from fffff b a CURRENT IRQL FAULTING IP nt MiRestoreTransitionPte fffff f f fba b f lock bts dword ptr rbx h Fh CUSTOMER CRASH COUNT DEFAULT BUCKET ID VISTA DRIVER FAULT BUGCHECK STR xA PROCESS NAME SyncBack exe TRAP FRAME fffff ce cf -- trap xfffff ce cf NOTE The trap frame does not contain all registers Some register values may be zeroed or incorrect rax rbx rcx fffff d e rdx rsi rdi rip fffff f rsp fffff ce d rbp r r r r r r r r iopl nv up ei pl nz na po nc nt MiRestoreTransitionPte x fffff f f fba b f lock bts dword ptr rbx h Fh ds Resetting default scope LAST CONTROL TRANSFER from fffff e to fffff c STACK TEXT fffff ce ce fffff e a a nt KeBugCheckEx fffff ce ce fffff e fffff a d bff nt KiBugCheckDispatch x fffff ce cf fffff f fffffa a ff fffffa cd a fffff a e ad fffffa a nt KiPageFault x fffff ce d fffff d ad fffff fffffa a ff fffffa a nt MiRestoreTransitionPte x fffff ce d b fffff b bc fffff ce d ffffffff ffffffff nt MiRemoveLowestPriorityStandbyPage x d fffff ce d fffff afe e fffff c fffff nt MmCopyToCachedPage xe fffff ce d fffff b f fffffa feb fffff ce d nt CcMapAndCopyInToCache x e fffff ce d fffff bf fffff ce d fffffa fc e nt CcCopyWrite x fffff ce d a fffff a fffffa fc... Read more

A:BSOD copying files, ntoskrnl.exe+7cc40

Nice post thanks

These crashes were caused by memory corruption/exception (probably a driver).
Please run these two tests to verify your memory and find which driver is causing the problem.

If you are overclocking anything reset to default before running these tests.
In other words STOP!!!
Memtest.





Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.



RAM - Test with Memtest86+

Driver verifier






Quote:
Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

So, I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Special Pool", "Force Pending I/O Requests" and "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

Reboot into Windows (after the crash) and turn off Driver Verifier by going back in and selecting "Delete existing settings" on the first page, then locate and zip up the memory dump file and upload it with your next post.

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.


Using Driver Verifier to identify issues with Windows drivers for advanced users

http://www.sevenforums.com/bsod-help-support/212996-bsod-copying-files-ntoskrnl-exe-7cc40.html
Relevancy 84.71%

Hi there,

I recently received my new rig (Alienware M14X), and have had persistent problems with it.

The main issue is that I get a BSOD every time I plug out the USB 2.0 cable running from my laptop to my Dell monitor, or sometimes when shutting the machine down.

I've tracked the error back to an issue with ntoskrnl.exe (+7cc40), but I also know this is quite a general issue.

I have tried multiple solutions (driver updating, etc), and System Restore seemed to solve this for a while, but it's happening again.

I've attached my .dmp files, and would love if someone could help on this.

Ivan

A:BSOD when removing USB 2.0 cable or shutting down, ntoskrnl.exe+7cc40

It's a hardware problem concerning the drivers for a camera connected to the computer made by Creative maybe a webcam or something of that nature. If you have a webcam please update the drivers or software for it from here: Creative Worldwide Support

Please fill in the rest of your system specs using the tool attached to this thread it will help us get better help for you.


Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [D:\Downloads\ivan\092111-27549-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*F:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Machine Name:
Kernel base = 0xfffff800`0301a000 PsLoadedModuleList = 0xfffff800`0325f670
Debug session time: Tue Sep 20 19:59:40.350 2011 (UTC - 6:00)
System Uptime: 0 days 4:05:52.224
Loading Kernel Symbols
...............................................................
................................................................
.......................................................
Loading User Symbols
Loading unloaded module list
...............
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {0, 2, 0, fffff8000309ad75}

Unable to load image \SystemRoot\system32\DRIVERS\CtClsFlt.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for CtClsFlt.sys
*** ERROR: Module load completed but symbols could not be loaded for CtClsFlt.sys
Probably caused by : CtClsFlt.sys ( CtClsFlt+156b )

Followup: MachineOwner
---------

6: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: 0000000000000000, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff8000309ad75, address which referenced memory

Debugging Details:
------------------
READ_ADDRESS: GetPointerFromAddress: unable to read from fffff800032c9100
0000000000000000

CURRENT_IRQL: 2

FAULTING_IP:
nt!KeSetEvent+1e3
fffff800`0309ad75 488b00 mov rax,qword ptr [rax]

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

BUGCHECK_STR: 0xA

PROCESS_NAME: System

TRAP_FRAME: fffff880037704a0 -- (.trap 0xfffff880037704a0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000000 rbx=0000000000000000 rcx=fffffa800c263a98
rdx=0000000000000001 rsi=0000000000000000 rdi=0000000000000000
rip=fffff8000309ad75 rsp=fffff88003770630 rbp=0000000000000000
r8=0000000000000000 r9=00000000000000a0 r10=00000... Read more

http://www.sevenforums.com/bsod-help-support/187959-bsod-when-removing-usb-2-0-cable-shutting-down-ntoskrnl-exe-7cc40.html
Relevancy 84.71%

Periodic BSOD about 2 times / day starting about 3 weeks ago.

Updated some out of date drivers last night but More BSOD today (although they look to be differnt errors)

Dump attached

A:BSOD when not in use (win7sp1_gdr.110622-1506) x64 ntoskrnl.exe+7cc40

mmb - used to get exactly what you are describing for weeks and weeks. If you have not made any other radical changes to the system, first try reseating all memory first then if you have more than 1 module, take one out and run with the other(s) until you find the culprit, turned out that one of my modules was bad - I just changed both and now no more BSODs. Used to drive me crazy !! Worth a try.

http://www.sevenforums.com/bsod-help-support/193104-bsod-when-not-use-win7sp1_gdr-110622-1506-x64-ntoskrnl-exe-7cc40.html
Relevancy 83.85%

My custom made PC - to BSOD tied crash ntoskrnl.exe random as address All very has been plagued with very random BSODs for over a week now but all crashes logged show the crash address as ntoskrnl exe For nearly all the crashes except this very latest one while I was setting up my account here and files to share with you happened while running a game Firefox window and Chrome window with a streaming TV BSOD very random - All tied to ntoskrnl.exe as crash address channel I recently removed my NVIDIA GTX to upgrade to the GTX yes full driver flush and reinstall and since then and possibly tied to the latest drivers that were updated I've been having issues I suspected it was just a bad card which I got directly from NVIDIA after working with them at PAX East The card BSOD very random - All tied to ntoskrnl.exe as crash address was removed and I purchased a GTX ti to test things but I've crashed twice today already When I ran memtest after the first few crashes my gigs of G-Skill ram passed all tests but the block move test I've read that that may be due to the latest build of memtest so I have not suspected my RAM to be the issue However now that I've pretty much determined it isn't the video card I am completely stumped All drivers have been properly updated bios chipset SATA etc and I was hoping someone could spot what is going on with the files I've uploaded and according to the instructions in your sticky Please advise what other info I can provide I'm new here

A:BSOD very random - All tied to ntoskrnl.exe as crash address

As an aside, when I had my GTX 570, I never had issues and could run the same programs as I have been during this phase of trouble. Also, I have been informed by some co-workers that I have some conflicting issues with the AMD Catalyst Control Center and the fuel service. When I was updating my SATA and chipset drivers, I was led to believe I had to have the CCC to update them but now that's causing rampant errors which are logged in my Event Viewer.

If anyone sees anything beyond that, please do share, I'm still troubleshooting these issues as I type this.
EDIT: AMD CCC, USB filter, and APP SDK have been uninstalled.

http://www.sevenforums.com/bsod-help-support/232932-bsod-very-random-all-tied-ntoskrnl-exe-crash-address.html
Relevancy 82.99%

I frequently get BSOD's at the same crash address (ntoskrnl.exe+7cc40) but with different bug strings:

IRQL_NOT_LESS_OR_EQUAL
SYSTEM_SERVICE_EXCEPTION
PAGE_FAULT_IN_NONPAGED_AREA
KMODE_EXCEPTION_NOT_HANDLED

I usually get it while actively using my computer. I have tried to reinstall windows but it still happens as well as updated all drivers. I have run memtest overnight with no issues as well. I have also reseated all my memory and video card as well.

OS: Windows 7 Premium x64
CPU: AMD Phenom?II X6 1100T Six-Core CPU w/ HyperTransport Technology
VIDEO: AMD Radeon HD 6950 2GB GDDR5 16X PCIe Video Card [+152] (Major Brand Powered by AMD)

Thank you so much for your help! I am grateful that there are experts that are willing to help out with computer issues.

Thanks,

Lam

A:BSOD while watching streams or playing video games, ntoskrnl.exe+7cc40

New crashes are attached. Does anybody have any fixes?

Thanks a ton!

http://www.sevenforums.com/bsod-help-support/202104-bsod-while-watching-streams-playing-video-games-ntoskrnl-exe-7cc40.html
Relevancy 82.56%

Hi all,

I have been having the occasional crashes in the past that I'd put down to my old graphics card not coping with the games I play.
Thing is , I've recently (this month) upgraded the card and PSU and the crashes seem to have got worse.

New PSU: Corsair AX760i Digital ATX '80 Plus Platinum' Modular Power Supply.
New Card:Gigabyte Radeon R9 290X OC WindForce 4096MB GDDR5 PCI-Express Graphics Card

I can't seem to reproduce the crashes, and they seem to happen fairly randomly - when I'm gaming , when I'm just browsing the net , indeed when the machine is just idling and doing nothing.
So I'm hoping you guys might be able to shed some light.

I've run Furmark for 30 mins without any issues and memtest for 8 hours , again no issues

Thanks for taking the time out to have a look.

A:Random BSOD error 0x00000124

Hello and welcome Robbo look as you have tested out the GPU PSU and RAM it leaves really the CPU. Now I ma no expert and I cannot get the report to attach but the dump files are saying there is a hardware failure see this and look at parameter 1
https://msdn.microsoft.com/en-us/lib...(v=vs.85).aspx I don't know how old the CPU is and also would like to see what the temps are run Speccy and post back if you can.
https://www.piriform.com/speccy

http://www.sevenforums.com/bsod-help-support/361541-random-bsod-error-0x00000124.html
Relevancy 82.56%

I have been reading this forum for the past few days and you have been very helpful, so I am hoping you guys may be able to help me. I recently installed a Corsair Force 3 into my custom built PC and ever since it has been a slew of BSoDs, the most common as you can see from the attachment is the 0x00000124. I have already tried updating my intel drivers which only made the problem worse to the point I had to do another fresh install. Thank you in advance.

A:Random BSoD, Error 0x00000124

  
Quote: Originally Posted by apsolus


I have been reading this forum for the past few days and you have been very helpful, so I am hoping you guys may be able to help me. I recently installed a Corsair Force 3 into my custom built PC and ever since it has been a slew of BSoDs, the most common as you can see from the attachment is the 0x00000124. I have already tried updating my intel drivers which only made the problem worse to the point I had to do another fresh install. Thank you in advance.


Your .dmp file shows a stop error of 0x124 which is a general hardware error .





Quote:
A "stop 0x124" is fundamentally different to many other types of bluescreens because it stems from a hardware complaint.

Stop 0x124 minidumps contain very little practical information, and it is therefore necessary to approach the problem as a case of hardware in an unknown state of distress


Some generic advice.

If you are overclocking STOP. Return to the default settings at least for now.
If you are running a RAID update its driver.
You can read more on this error and what to try here... Stop 0x124 - what it means and what to try

http://www.sevenforums.com/bsod-help-support/204966-random-bsod-error-0x00000124.html
Relevancy 82.56%

Hi I have been facing issues with BSOD for about a week now and they seem to keep on occuring The screen comes up randomly but happens more often when i switch on the computer from sleep hibernate mode or start it after having shut it down I have done some due dilligence on my end and it has not really worked thus far I have changed replaced my 0x00000124 error BSOD, Random RAM and hard drive Reinstalled my windows from scratch re-partitioned the hard drive Initially this started happening when i had a windows installed i then removed it Random BSOD, error 0x00000124 and then installed a windows professional bit and in an act of desperation re-installed windows a nd time Random BSOD, error 0x00000124 to Windows prfessional bit but the BSOD has gone no where I have also updated the drivers the BIOS and reset my bios to default to ensure my processor is not overclocked I have used blue screen view and it blames the ntoskrnl exe I have also configured the driver verifier as had been suggested on Random BSOD, error 0x00000124 some other forums but that hasnt seemed to help my issue either I would really appreciate if someone here can help me with this issue I have really run out of options here

A:Random BSOD, error 0x00000124

Problem signature:

Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.48
Locale ID: 1033

Additional information about the problem:

BCCode: 124
BCP1: 0000000000000000
BCP2: FFFFFA800285B8F8
BCP3: 00000000B2000030
BCP4: 000000000C000E0F
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

http://www.sevenforums.com/bsod-help-support/313625-random-bsod-error-0x00000124.html
Relevancy 82.56%

Hello

Since 25-01-2013 I have received around 40 BSOD. I know it is most likely a hardware error because of the stop code but I have no idea as to which component it is so I was wondering whether any of you people could tell that out from the dump files. If it is not possible to see which component it is from the dump file how should I go about troubleshooting the problem?

A:Random BSOD, error 0x00000124

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000004, PCI Express Error
Arg2: fffffa80060a88d8, Address of the WHEA_ERROR_RECORD structure.
Arg3: 0000000000000000
Arg4: 0000000000000000

Debugging Details:
------------------
So from looking at the dump file we can see it is either the PCI slot or the card in the slot that is causing the failure, the best way to test is to switch out what ever card is in the slot with another one and see if you still get a BSOD.

For more information see this thread:

Stop 0x124 - what it means and what to try

http://www.sevenforums.com/bsod-help-support/285733-random-bsod-error-0x00000124.html
Relevancy 82.56%

BSOD while doing remote connect to two office computers, browsing internet and watching King Crimson video. I have done the same thing many times without a problem. It didn't seem like it was overheating - or working hard.
I am running Windows 7 Pro 64 bit, which I reinstalled fresh a few months ago
I am running the 'Dummy OC' - nothing custom

A:Random BSOD, error 0x00000124

A stop error of 0x124 is a general hardware error .





Quote:
A "stop 0x124" is fundamentally different to many other types of bluescreens because it stems from a hardware complaint.

Stop 0x124 minidumps contain very little practical information, and it is therefore necessary to approach the problem as a case of hardware in an unknown state of distress.


Some generic advice.

If you are overclocking STOP.
Return to the default settings at least for now.
If you are running a RAID update its driver.
You can read more on this error and what to try here...

Stop 0x124 - what it means and what to try

http://www.sevenforums.com/bsod-help-support/202863-random-bsod-error-0x00000124.html
Relevancy 81.7%

Hi guys,

Facing random freezing at least 1 per day. The freezing often occur when surfing with firefox browser at random period of time (5~10 mins) where everything pause and no BSOD screen. I suspect the video card driver so I download the latest nvidia driver. Obviously the update did not help solved the problem. Pls help

A:Random Freezing and BSOD, error 0x00000124

Code:
Product ID:00426-OEM-8992662-00006
ASUS OEM installed to a retail motherboard.

Purchase a genuine version of Windows 7 - we do not support counterfeit installations

http://www.sevenforums.com/bsod-help-support/288865-random-freezing-bsod-error-0x00000124.html
Relevancy 81.7%

Ever since I installed my new PSU and GPU into my system, I get blue screens by random it seems. Once was when I was watching a Youtube video, the other was me playing a game. I've included the dmps in the Zip file. Please look at the later ones, for example, the one from Sept. 21, or today in fact. The older ones can be used for reference too. Thanks in advance.

A:BSOD @ Random Times error 0x00000124

Please fill up the missing information of your system Specs, including the PSU info. It is very vital.
See your system specs and fill it up here.
Let us know the wattage of the PSU.

And, Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

As you pointed these two as a line, so let us see these two at first. Will go for other things depending on the situation.
_____________________________________________________________________________

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 124, {0, fffffa8008db5028, b6674000, 135}

Probably caused by : AuthenticAMD

Followup: MachineOwner
---------

2: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa8008db5028, Address of the WHEA_ERROR_RECORD structure.
Arg3: 00000000b6674000, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000000000135, Low order 32-bits of the MCi_STATUS value.

Debugging Details:
------------------
BUGCHECK_STR: 0x124_AuthenticAMD

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

PROCESS_NAME: chrome.exe

CURRENT_IRQL: f

STACK_TEXT:
fffff880`02f6ca88 fffff800`03e15a3b : 00000000`00000124 00000000`00000000 fffffa80`08db5028 00000000`b6674000 : nt!KeBugCheckEx
fffff880`02f6ca90 fffff800`039a9453 : 00000000`00000001 fffffa80`08db6d30 00000000`00000000 fffffa80`08db6d80 : hal!HalBugCheckSystem+0x1e3
fffff880`02f6cad0 fffff800`03e15700 : 00000000`00000728 fffffa80`08db6d30 fffff880`02f6ce30 00000000`00000000 : nt!WheaReportHwError+0x263
fffff880`02f6cb30 fffff800`03e15052 : fffffa80`08db6d30 fffff880`02f6ce30 fffffa80`08db6d30 00000000`00000000 : hal!HalpMcaReportError+0x4c
fffff880`02f6cc80 fffff800`03e08e8f : 00000000`07bd11fc 00000000`00000001 fffff880`02f6ceb0 00000000`00000000 : hal!HalpMceHandler+0x9e
fffff880`02f6ccc0 fffff800`0389146c : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : hal!HalHandleMcheck+0x47
fffff880`02f6ccf0 fffff800`038912d3 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KxMcheckAbort+0x6c
fffff880`02f6ce30 00000000`56b51fe5 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiMcheckAbort+0x153
00000000`0ae5f398 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x56b51fe5
STACK_COMMAND: kb

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: AuthenticAMD

IMAGE_NAME: AuthenticAMD

DEBUG_FLR_IMAGE_TIMESTAMP: 0

FAILURE_BUCKET_ID: X64_0x124_AuthenticAMD_PROCESSOR_CACHE

BUCKET_ID: X64_0x124_AuthenticAMD_PROCESSOR_CACHE

Followup: MachineOwner
---------

http://www.sevenforums.com/bsod-help-support/305714-bsod-random-times-error-0x00000124.html
Relevancy 81.7%

Hello there I replaced my old video card with a nvidia evga and the temperatures on it are much better No overheating is occurring on any of my pc components I with BSOD bit quite testing done 0x00000124 a error Random of am still getting bsod with stop code Attached new zip file To recap just about every Random BSOD error 0x00000124 with quite a bit of testing done component has been replaced Random BSOD error 0x00000124 with quite a bit of testing done except for my power supply There is no overclocking and all temps are fine when stressed Since the video card has been replaced no more screen tearing to BSOD have been observed It seems to occur randomly when gaming and when not gaming just browsing internet etc Win Ultimate bit z x-ud h Gigabyte GB Corsair GForce SSD tested with OS installed TB Caviar Black WD tested with OS installed EVGA GTX W CoolerMaster GB Corsair Vengeance Pro MHz clocked at MHz GB Corsair Dominator MHz for testing i k GHz turbo off ------------------------------------------------------------------------------- Hi there I have been getting BSOD mainly x with occasional x a for about a month now I've done several things to rule certain hardware components out but am still unable to pinpoint the culprit When it happens my computer bogs down for a few seconds before BSOD Sound will stutter oddly and windows will not respond to clicking start button or resizing windows etc My monitor displays a bunch of horizontal colors then BSOD Win Ultimate bit z x-ud h Gigabyte GB Corsair GForce SSD tested with OS installed TB Caviar Black WD tested with OS installed XFX HD W CoolerMaster GB Corsair Vengeance Pro MHz clocked at MHz GB Corsair Dominator MHz for testing i k GHz turbo off I've ran memtest on my memory for about hours with no errors I did use both sticks at once however I also switched my GB vengeance for the GB dominator but still encounter BSOD I made sure my timings were set correctly I ran chkdsk r on both my harddrives with no errors I took out my ssd from my computer and am now just using the TB previously used for data but still seem to encounter BSOD I have took out my video card and ran with onboard graphics Same thing It seems like all I have left is PSU MOBO and processor This is the most recent BSOD which I received minutes into a fresh windows install

A:Random BSOD error 0x00000124 with quite a bit of testing done

Welcome to SF .

There is only one bug check in the file uploaded as well as only one is logged
in the System Event log (i guess because it's a fresh install) too bad that wiped any evidence
that was left behind, however the bug check (uploaded) is not 0x124 rather it's 0x24.
I would like to have some more to get more perspective.

What you're describing sounds like a thermal issue / RAM / Motherboard.
When you got the horizontal lines (artifacts) on the screen, was it with the dedicated
GPU installed or while using the onboard graphics?
Does it always display those before it bug checks?
Where did you obtain the installation media?
Did you try a different one?


Fill out this form and post back the result:
Power Supply Calculator

Test for thermals and stability:
Download Speccy and post a Screenshot of the summary window, one at idle and another while putting load on the PC using Prime95 for the CPU side and Furmark for the GPU.Before running Prime95 make sure to enable Round-off checking (see 1st post under the tutorial).


Reset the BIOS back to default in case you're unaware that your CPU is overclocked:CLR CMOS


   Note
Write down the current value of the SATA Mode!
Its either AHCI or IDE.
After resetting the CMOS go back and verify the value for SATA Mode is what it was
when the OS was installed.




   Note
If any component is overclocked reset it back to stock speeds!





   Warning
The Following Method Should NOT Be Performed On An SSD!
Testing the HDD:
Perform a Disk Check | Disk Check- Scroll down to OPTION TWO of the tutorial and use the /R switch in the CHKDSK command | chkdsk C: /R.
Then Post the Disk Check results following | This Tutorial.
Once back in Windows, download Crystal Disk Info and post a screenshot (multiple shots if you have more than one drive).
Download SeaTools for DOS if you don't want to use a CD to test the HDD you can use YUMI – Multiboot USB Creator to create a bootable USB (instructions are found at the bottom of both pages).
If SeaTools for DOS is unable to recognize your HDD:
Visit HDDdiag and follow the instructions | Or follow the instructions below.
If SeaTools For DOS does not recognize the drive;
Boot into the BIOS using the *Fx key.
Look for an entry called SATA Mode (or something similar), it should be set to IDE / AHCI.
It's probably set to AHCI which is why SeaTools doesn't recognize them in the DOS environment.
Set it to IDE then save and exit usually by pressing the F10 key.
Now boot into SeaTools and it should detect the drives.
Start the Long Test and let it run.
Upon completion don't try to boot into Windows as it will only result in a BSOD, go back into the BIOS
and change the SATA setting back to what it was in the first place.

*Popular BIOS access keys.







  
Quote: Originally Posted by Arc


Re-seat the sata and power.




Let us know the results.
Good places to read more:
Stop 0x124 - what it means and what to try
Stop 0x124 Troubleshooting - 'New Method'

http://www.sevenforums.com/bsod-help-support/310315-random-bsod-error-0x00000124-quite-bit-testing-done.html
Relevancy 81.7%

Hi,
The first BSOD was with 0x00000101 but that one has no minidump file saved.
After a couple of hours I experienced BSOD with error 0X00000124 without knowing where to search.
I've already run Prime95 like 30 minutes in hardes test, memtest86 with 1 pass without errors.
I even try to run some versions of Linux LiveCD, none of them work.
Help will be appreciated.
Thank you!
PS: I attached files for debug.

A:BSOD error 0x00000124 random and when idle

Anyone help?
I've run sfc /scannow and did not find any errors...

http://www.sevenforums.com/bsod-help-support/354655-bsod-error-0x00000124-random-when-idle.html
Relevancy 81.7%

I have been getting random BSOD's and have no real idea of the cause, would very much appreciate any assistance that can be given here.

This is a newly build computer and not even 3 weeks old, I believe I am running all the latest drivers as I have used driver magician to get the one's I was missing.

A:BSOD at random interval's, error 0x00000124

Your Windows installation is counterfeit, you need to format and activate Windows using a legitimate product key.

http://www.sevenforums.com/bsod-help-support/303500-bsod-random-intervals-error-0x00000124.html
Relevancy 81.7%

hi, i have not changed any hardware recently however i am reciving the 0x00000124 error code. i have reinstalled windows, run system recovers, reinstalled drivers, updates and rolled back my BIOS, swapped my graphics card, kept an eye on the temperature of CPU and GPU, the system is in no way overclocked, and i cant think of where to go from here.

i have run prime95, 3dmark with no BSOD

the crash happens at random times i cant pin it down to specific events, my specs are;

windows 7 sp1 home 64 bit
i5 4460
evga 760 gtx
asus maximus vii ranger
16 GB corsair ram

thanks for you help and time

Relevancy 81.7%

I've been having an issue for a few months now where my monitor will randomly flicker Seemingly BSOD error 0x00000124 Random lines of pixels while I'm playing games or even when I'm just on the Seemingly Random BSOD error 0x00000124 desktop Eventually my PC will freeze up displaying a solid block of colour not the BSOD screen sometimes with lines of pixels Seemingly Random BSOD error 0x00000124 going across I've attached my latest dmp file It's worth noting that when the screen freezes up even though I can't see what is going on applications on windows remain running for a bit I know this because when the screen Seemingly Random BSOD error 0x00000124 freezes I can still talk to people on Skype Eventually though there is a loud buzzing sound and windows shuts itself down I never actually see the BSOD because my monitor remains corrupted Things I have tried to fix the issue - A different monitor - Ended up seeing the exact same random graphical glitches on the monitor though don't remember whether it ever got to the point of crashing my PC - Switching from a HDMI to DVI cable and back neither improved the monitors flickering - Running on integrated graphics fixed the problem thus leading me to suspect the GPU - Sent the GPU back to the company where I bought the PC ADMI and they sent it back saying 'no faults were found' with the GPU after sending it to their technical team -Also I'm certain my diplay drivers are installed correctly I'm using the Catalyst omega drivers from AMD and have also tried the newer beta drivers but they didn't help the problem - I've disabled all types of hardware acceleration I can since I've heard it can caus issues with AMD GPU's - I've run memtest getting passes with no errors -I've monitored my PC temperatures I'm sure my GPU isn't overheating most of the time keeping below even when playing intensive games -I've previously done a clean install of windows Things to note- The first time my PC ever BSOD was when I first used my newer ben q monitor though I remember seeing some graphical corruption in my old monitor it never BSOD Whatever I do I can't seem to reproduce the flickering it really does seem to be at random times When I see one flicker it'll happen regularly for a while till it just stops Nor can I reproduce the BSOD I'm really stumped about how to fix this issue It's be really kind of someone to help me out

A:Seemingly Random BSOD error 0x00000124

It is a stop ox124, which is supposed to be a hardware error, but it may be anything and everything associated with the computer. And it requires a lot of tests to determine which is failing actually.
Code:
BugCheck 124, {0, fffffa80082de038, 0, 0}

Probably caused by : AuthenticAMD

Followup: MachineOwner
---------
Please follow Stop 0x124 - what it means and what to try .... Take the tests from the beginning, one by one.

Let us know about your advancements, also let us know for any questions about the tests.

http://www.sevenforums.com/bsod-help-support/363113-seemingly-random-bsod-error-0x00000124.html
Relevancy 81.7%

Hello this is my first post so I hope I'm doing it correctly I get BSODs frequently maybe once or twice a week but I can't seem to relate them to anything in particular Sometimes it happens browsing sometimes after I error when gaming, BSOD, Random 0x00000124 usually play some games I can't see a specific pattern I've noticed that sometimes the audio freezes and starts looping the same quot frame quot over and over and then the BSOD appears Another strange thing is that my computer doesn't restart when the BSOD happens I've uploaded some files but they Random BSOD, usually when gaming, error 0x00000124 have older BSOD dumps as well The relevant BSOD dumps are the most recent since October I had a problem a while back that made BSODs happen almost once a day but I found it was a combination of faulty RAM and using RAM from different manufacturers That issue should be solved now My biggest fear is that the culprit turns out to be my GPU I hope I don't need to replace it That's just a wild guess though Hope you can help me Thanks

A:Random BSOD, usually when gaming, error 0x00000124

Debugging Analysis:


Code:
BugCheck 124, {4, fffffa8007ae8038, 0, 0}

Probably caused by : GenuineIntel
The first parameter indicates that the error was sourced from your PCIe bus, therefore it is most likely associated with this type of bus or a device connected to it.


Code:
7: kd> !errrec fffffa8007ae8038
===============================================================================
Common Platform Error Record @ fffffa8007ae8038
-------------------------------------------------------------------------------
Record Id : 01cee18371d6b18f
Severity : Fatal (1)
Length : 672
Creator : Microsoft
Notify Type : PCI Express Error
Timestamp : 11/15/2013 1:12:43 (UTC)
Flags : 0x00000000

===============================================================================
Section 0 : PCI Express
-------------------------------------------------------------------------------
Descriptor @ fffffa8007ae80b8
Section @ fffffa8007ae8148
Offset : 272
Length : 208
Flags : 0x00000001 Primary
Severity : Recoverable

Port Type : Root Port
Version : 1.1
Command/Status: 0x4010/0x0507
Device Id :
VenId:DevId : 8086:340e <-- Device
Class code : 030400
Function No : 0x00
Device No : 0x07
Segment : 0x0000
Primary Bus : 0x00
Second. Bus : 0x00
Slot : 0x0000
Dev. Serial # : 0000000000000000
Express Capability Information @ fffffa8007ae817c
Device Caps : 00008021 Role-Based Error Reporting: 1
Device Ctl : 0107 ur FE NF CE
Dev Status : 0003 ur fe NF CE
Root Ctl : 0008 fs nfs cs

AER Information @ fffffa8007ae81b8
Uncorrectable Error Status : 00014000 ur ecrc mtlp rof UC ca CTO fcp ptlp sd dlp und
Uncorrectable Error Mask : 00000000 ur ecrc mtlp rof uc ca cto fcp ptlp sd dlp und
Uncorrectable Error Severity : 00062010 ur ecrc MTLP ROF uc ca cto FCP ptlp sd DLP und <-- These are our important flags
Correctable Error Status : 00002000 ADV rtto rnro dllp tlp re
Correctable Error Mask : 00000000 adv rtto rnro dllp tlp re
Caps & Control : 0000000e ecrcchken ecrcchkcap ecrcgenen ecrcgencap FEP
Header Log : 00000000 00000000 00000000 00000000 <-- Contains the Header for TLP error
Root Error Command : 00000000 fen nfen cen
Root Error Status : 00000000 MSG# 00 fer nfer fuf mur ur mcr cer
Correctable Error Source ID : 00,00,00
Correctable Error Source ID : 00,00,00

===============================================================================
Section 1 : Processor Generic
-------------------------------------------------------------------------------
Descriptor @ fffffa8007ae8100
Section @ fffffa8007ae8218
Offset : 480
Length : 192
Flags : 0x00000000
Severity : Informational

Proc. Type : x86/x64
Instr. Set : x64
CPU Version : 0x00000000000106a5
Processor ID : 0x0000000000000007
The most relevant part here is the AER (PCI Express Advanced Error Reporting), it's been a while since I've had a Stop 0x124 with a PCI/PCIe slot being the source of the problem.

MTLP seems to point to malformed transaction layer packet (TLP). This layer is used for accepted and sending TLPs, which are messages used for I/O and memory reads and writes. The Header log contains the TLP Header which is 32-bits long or 4 bytes. I believe this packet is empty with no data present.

A malformed TLP being received, should mean that no receivers should update their flow information. I'm guessing a receiver did in fact update their flow information leading to the other error below.

ROF is a receiver overflow, reading the specifications, it seems that a TLP packet is consuming more than the specified amount of control flow credit. I believe the credit system is a way of controlling TLPs and their buffer sizes.

FC... Read more

http://www.sevenforums.com/bsod-help-support/311739-random-bsod-usually-when-gaming-error-0x00000124.html
Relevancy 81.7%

Hi guys,

I built my first computer about 2 weeks ago. These are the specs.

CPU: AMED Athlon II 651k Black Edition
Motherboard: Gigabyte GA-A55M-DS2 A55 AMD FM1
SSD: Corsair 60GB Nova 2
RAM: 8GB 2x4GB Kingston 1600mhz hyper-X CL9
GPU: XFX HD 5450 heatsink 1GB DDR3 low profile

The power supply was a super cheap one included with the case, I thought that could be my problem but I changed it for a 400w antec unit and the problem still exists.

The stop code is 0x00000124

The crash dump file is here:
NEW LINK: https://dl.dropbox.com/u/17759600/09...20-%20Copy.zip

Any help would be appreciated as at this moment, i do not know what to do..

Thanks!

A:Random BSOD Error - 0x00000124 - becoming more and more frequent

Error (404)
We can't find the page you're looking for. Check out our Help Center and forums for help, or head back to home.

Welcome and go through this for your bugcheck:
Stop 0x124 - what it means and what to try

http://www.sevenforums.com/bsod-help-support/254678-random-bsod-error-0x00000124-becoming-more-more-frequent.html
Relevancy 81.7%

I'm getting a BSOD frequently, though quite often Windows simply freezes until I hard reboot it too. I suspect driver issues, but I'm a bit clueless in such things, please help!

A:Random intermittent BSOD, Error 0x00000124

Welcome to SF Wilhelm .

None of the bug checks you uploaded are 0x124, but rather they are all 0x7E (0x1000007E).
They are consistently due to an out dated driver.

Code:
Product Type Realtek RTL8191SE Wireless LAN 802.11n PCI-E NIC
Driver c:\windows\system32\drivers\rtl8192se.sys

Code:
lmvm rtl8192se
Browse full module list
start end module name
fffff880`03c32000 fffff880`03d39000 rtl8192se T (no symbols)
Loaded symbol image file: rtl8192se.sys
Image path: \SystemRoot\system32\DRIVERS\rtl8192se.sys
Image name: rtl8192se.sys
Browse all global symbols functions data
Timestamp: Wed Aug 19 03:49:25 2009
Driver Reference Table - rtl8192se.sys

Description Version Update File Size DownloadWindows driver auto installation program (support Windows 7) 2021.0.0203.2012 2012/5/17 26771k Choose a server

http://www.sevenforums.com/bsod-help-support/314362-random-intermittent-bsod-error-0x00000124.html
Relevancy 81.7%

Hello everybody I've been browsing this forum in the past but decided to make an account today I need help with a BSOD that I've started getting a few times This error arises only when playing MW BSOD Random while error 0x00000124 MW2, playing ONLY and that too randomly At Random BSOD while playing MW2, error 0x00000124 other times I play mw without any problem whatsoever Other more taxing games and benchmarks run perfectly Random BSOD while playing MW2, error 0x00000124 fine eg Random BSOD while playing MW2, error 0x00000124 Crysis Bad Company Unigine Heaven Benchmark Alien vs Predator Benchmark and nearly every other game I have CPU is overclocked at Ghz with max temps to C is p stable checked atleast for an hour GSkill GB Rams are at stock Mhz GPU clocks are at stock Using latest Nvidia drivers Nearly every component is relatively new only months old Attached are the dump files and perfmon html files as outlined in the sticky BSOD thread Really appreciate if anybody could help identifying the cause I just hope it's not faulty hardware I can play more taxing games without any problem Heck I even played Battlefield Alpha trial without any problem Thanks alot in advance

A:Random BSOD while playing MW2, error 0x00000124

Seems to be caused by your CPU being unstable
Stop 0x124 - what it means and what to try
This is a hardware error

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa8009bc8028, Address of the WHEA_ERROR_RECORD structure.
Arg3: 00000000be200000, High order 32-bits of the MCi_STATUS value.
Arg4: 000000000005110a, Low order 32-bits of the MCi_STATUS value.

Debugging Details:
------------------
BUGCHECK_STR: 0x124_GenuineIntel

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

PROCESS_NAME: iw4mp.dat

CURRENT_IRQL: f

STACK_TEXT:
fffff880`0336ca58 fffff800`033f1903 : 00000000`00000124 00000000`00000000 fffffa80`09bc8028 00000000`be200000 : nt!KeBugCheckEx
fffff880`0336ca60 fffff800`02f89293 : 00000000`00000001 fffffa80`09bc9d30 00000000`00000000 fffffa80`09bc9d80 : hal!HalBugCheckSystem+0x1e3
fffff880`0336caa0 fffff800`033f15c8 : 00000000`00000728 fffffa80`09bc9d30 fffff880`0336ce30 fffff880`0336ce00 : nt!WheaReportHwError+0x263
fffff880`0336cb00 fffff800`033f0f1a : fffffa80`09bc9d30 fffff880`0336ce30 fffffa80`09bc9d30 00000000`00000000 : hal!HalpMcaReportError+0x4c
fffff880`0336cc50 fffff800`033f0dd5 : 00000000`00000004 00000000`00000001 fffff880`0336ceb0 00000000`00000000 : hal!HalpMceHandler+0x9e
fffff880`0336cc90 fffff800`033e4e88 : 00000000`00000000 00000000`000002bc 00000000`00000000 00000000`00000000 : hal!HalpMceHandlerWithRendezvous+0x55
fffff880`0336ccc0 fffff800`02e71e6c : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : hal!HalHandleMcheck+0x40
fffff880`0336ccf0 fffff800`02e71cd3 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KxMcheckAbort+0x6c
fffff880`0336ce30 00000000`76cc0aa4 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiMcheckAbort+0x153
00000000`0e2ffed4 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x76cc0aa4
STACK_COMMAND: kb

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: hardware

IMAGE_NAME: hardware

DEBUG_FLR_IMAGE_TIMESTAMP: 0

FAILURE_BUCKET_ID: X64_0x124_GenuineIntel_PROCESSOR_CACHE

BUCKET_ID: X64_0x124_GenuineIntel_PROCESSOR_CACHE

Followup: MachineOwner
---------

http://www.sevenforums.com/bsod-help-support/184027-random-bsod-while-playing-mw2-error-0x00000124.html
Relevancy 81.7%

Hi everyone This is nd time i am asking question in this forum previous Random Error Anything Doing = BSOD While 0x00000124 Code time you guys Random BSOD While Doing Anything Error Code = 0x00000124 helped me a lot thanks Ok now lets get to my problem my pc just having random bsod while gaming browsing watching videos etc All my drivers are updated and i also keep my windows upto date but from month i am having strange random bsod which is so annoying I still can t find the fix why its causing bsod which software or hardware causing that bsod i have no idea I tested my pc with stressing programs such as prime aida extreme hyper pi programs like that but i did nt get a single bsod that time it just happen randomly some time i get bsod at ideal as well Everything is on default values i did nt overclock anything all hardware running on their default values Here s the actual image of bsod Attachment PC SPECIFICATION CPU INTEL CORE I K GHZ MB CACHE RAM KINGSTON GB DDR MHZ CPU COOLER NZXT RESPIRE T MB GIGABYTE Z A-D -B VGA GIGABYTE GTX OC MB GDDR MOUSE G S LASER GAMING MOUSE PSU GIGABYTE SUPERB WATTS CASE GIGABYTE GZ-G PLUS CD DVD LG SUPER MULTI DRIVES HDD WD BLUE GB RPM WD GREEN TB DISPLAY SAMSUNG SYNCMASTER P HD OS MICROSOFT WINDOWS SP BIT CONTROLLER XBOX CONTROLLER FOR WINDOWS After all that i came here to ask you guys whats the problem is please help me Thanks in advance FULL REPORT

A:Random BSOD While Doing Anything Error Code = 0x00000124

It's having BSODs because your Windows installation is counterfeit. You have an Acer PID on a Gigabyte retail motherboard.


Code:
Host Name: PENTIUM-4---I7
OS Name: Microsoft Windows 7 Ultimate
OS Version: 6.1.7601 Service Pack 1 Build 7601
OS Manufacturer: Microsoft Corporation
OS Configuration: Standalone Workstation
OS Build Type: Multiprocessor Free
Registered Owner: nabil009
Registered Organization:
Product ID: 00426-OEM-8992662-00006 ----> Acer PID
Original Install Date: 7/5/2013, 5:48:43 AM
System Boot Time: 6/13/2014, 2:11:13 AM
System Manufacturer: Gigabyte Technology Co., Ltd.
System Model: Z68A-D3-B3
System Type: x64-based PC
Counterfeit installations such as yours can contain heavily modified code that causes the installation to behave it unexpected ways. Analysing BSODs and determining their causes on these sorts of installations is very unreliable. For this reason, many analysts won't attempt it.

My recommendation is to install a genuine Windows 7. This will minimise the problems you are experiencing, and make subsequent diagnosis of BSODs far more reliable. Once you are running a genuine Windows 7 installation, and are still experiencing BSOD's, we will be happy to help you solve them.

http://www.sevenforums.com/bsod-help-support/334574-random-bsod-while-doing-anything-error-code-0x00000124.html
Relevancy 80.84%

Here is what I have so far I've been trying to figure this out as I go so I'm not sure what information I provide is isn't important SF Diagnostic to follow BSOD happens anywhere from start up to after hours of intensive use although it happens more frequently as use intensifies I have checked all drivers detached all nonessential hardware replaced avast antivirus with Microsoft security essentials moved reseated memory and installed custom CPU fan all to no avail When I check the error in Windbg with errrec the details always come up that there is a BSOD error times at 0x00000124 daily, random cache read write error in bank regardless of the processor core or BSOD at random times daily, error 0x00000124 process name I suspect the processor may be faulty but I want to make sure before I send it back to Intel Running their processor diagnostic tool results in either a pass or a crash but the system crashes so frequently I can't be certain the test has anything to do with it

A:BSOD at random times daily, error 0x00000124

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 124, {0, fffffa8009b0e028, fe200000, 21136}

Probably caused by : GenuineIntel

Followup: MachineOwner
---------
Does the IPDT Full Functional test pass? Try an alternate CPU test:
CPU - Stress Test Using IntelBurnTest

If it passes, check your RAM:
RAM - Test with Memtest86+

You MUST run a minimum of 8 passes with MemTest86+

http://www.sevenforums.com/bsod-help-support/322997-bsod-random-times-daily-error-0x00000124.html
Relevancy 80.84%

So here's my story I built my computer about years ago A few months after building it I got a BSOD I didn't think much of it just carried on Then I got another one a few months later I formatted and they seemed to be better though I did get another a few more months later About a year or so ago I formatted again hoping to be rid of them but I haven't been I was told over on the PCHelpForums that it could be over heating So I bought a Corsair H i water cooler and my temps have been low now but I'm still getting blue screens I was told it could be my ram or graphics card so I tested my ram individually each stick and they passed all the tests I did an intense graphics test on my GPU and left it for an hour It got very very frequently, Happening error Random BSOD's 0x00000124 hot up to c I believe but no BSOD after an hour I stopped it They have been getting more frequent I got about a dozen this year already in one day I don't have all of those logs but I do have the most recent They all say Random BSOD's Happening frequently, error 0x00000124 the same exact thing hal dll a b ntoskrnl exe c b x The thing is I at first thought it was from recording my games But they can happen when I'm playing GTA and not recording Playing Minecraft and not recording I have even had one randomly happen while on google chrome But the strange thing is it's not an every time thing I played for hours a few days ago with some friends on GTA and nothing but I got one another time while playing GTA only hours in I really need help I make youtube videos for my quot job quot right now and I can't be loosing my videos or data PCHelpForum directed me to this site Yes I have all my windows updates all my Bios updates all my Nvidia updates All of that is installed Norton says I have no viruses after running a full system scan I'm out of ideas right now One more thing My CPU is overclocked right now and before you go AHhhh It doesn't over heat with the water cooler on it I have a live temp running when my computer is on I overclocked it below what was intended as it is the k series Intel says it can go up to I have it at And I have no problems with it most of the time And the biggest thing I was getting these BSOD's of the same exact everything before I overclocked Same Address Same Bug code and Same Parameters I over clocked using the built in system with my BIOS and I believe that is not the reason for these BSOD's Thank you for your help and please help quickly

A:Random BSOD's Happening frequently, error 0x00000124

Hello and welcome HLL seems like you have a hardware problem and likely to be a hard drive or CPU one from what I have seen.
Now for starters mate run these in safe mode if necessary (if you haven't already)

http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html
http://www.sevenforums.com/tutorials/433-disk-check.html < if necessary include the /f and /r in the command line as per Option2

if no go please run these

http://www.superantispyware.com/
http://www.malwarebytes.org/products/malwarebytes_free/
http://www.bleepingcomputer.com/download/adwcleaner/
ADW download from bleeping computer delete any rubbish found with the malware scans
(NB If one is running Kaspersky security it may rant about ADW - just ignore it or disable Kaspersky while the ADW is being used)

Now if you are worried re losing your data then back up now - just in case I use this as I like images rather than straight data back up
Imaging with free Macrium

I think you should also test the hard drive and one to use is this SeaTools for Windows | Seagate

if things do go pear shaped then there is another way of getting the data back but lets try this lot first.

http://www.sevenforums.com/bsod-help-support/370864-random-bsods-happening-frequently-error-0x00000124.html
Relevancy 80.84%

Hey all,

I've been getting random BSODs on my home-built computer but haven't been able to determine the source. I found out my PSU was bad a few months ago and replaced it, but it still hasn't stopped the BSODs. It seems to happen mainly while I'm playing games, but it has happened once or twice while browsing as well. The error code reads 0x00000124 and at this point is no longer rebooting my computer automatically, even though autoreboot is enabled. Attached is the SF Diagnostic folder, thanks in advance for any help you all can give.

Edit: Corrected the filename - that must have flown past my head.

Also - There is no overclocking, nor heating issues. I have the current SP for Win7. I also have cleaned and reseated all jumpers and connections, also replaced the PSU as it was causing a no-power issue a month or so ago. Dump files before December may relate to voltage issues.

A:Random BSOD - error 0x00000124 primarily during gaming

Hi holodomor,

Please can you add your systems specs to your profile? Here's how:

System Info - See Your System Specs






Quote:
3: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa8007d19028, Address of the WHEA_ERROR_RECORD structure.
Arg3: 00000000b6002000, High order 32-bits of the MCi_STATUS value.
Arg4: 00000000c0000135, Low order 32-bits of the MCi_STAT

Error : DCACHEL1_DRD_ERR (Proc 3 Bank 0)
Status : 0xb6002000c0000135
Address : 0x000000010b5d0900
Misc. : 0x0000000000000000
Component Information = REG_BINARY 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
Configuration Data = REG_FULL_RESOURCE_DESCRIPTOR ff,ff,ff,ff,ff,ff,ff,ff,0,0,0,0,0,0,0,0
Identifier = REG_SZ AMD64 Family 16 Model 10 Stepping 0
ProcessorNameString = REG_SZ AMD Phenom(tm) II X6 1090T Processor
VendorIdentifier = REG_SZ AuthenticAMD



A 0x124 error is usually heat related, defective hardware, memory or even processor.
I suspect this is CPU-related, and issues with L1 cache (or possibly the BIOS or the motherboard)

Also update the motherboard BIOS according to the manufacturer's instructions.
Their website should provide detailed instructions as to the brand and model-specific procedure.






Quote:
3: kd> !sysinfo smbios
[SMBIOS Data Tables v2.6]
[DMI Version - 0]
[2.0 Calling Convention - No]
[Table Size - 2273 bytes]
[BIOS Information (Type 0) - Length 24 - Handle 0000h]
Vendor American Megatrends Inc.
BIOS Version 1005
BIOS Starting Address Segment f000
BIOS Release Date 08/24/2010
BIOS ROM Size 100000



Please download and run speedfan, (click on link that reads "speedfan 4.47"):

Download SpeedFan - Access temperature sensor in your computer

and post a snapshot of the temps that the processor is running.

Please update the following driver from your manufacturers web-site as it is outdated:






Quote:
athur Atheros AR9271 Wireless Network Adapter Service 10/11/2010 5:10:57 AM


I also noticed:






Quote:
Your last 13 crashes relate to lolClient.exe which is a part of Leauge of Legends game.

It is not needed to play the game, please disable it before you lauch the game
referring to this guide:

http://na.leagueoflegends.com/board/....php?t=1086230

If you have patched the game recently, i suggest you uninstall the patch
or re-install the game itself if problem persists or if you no longer use the game..uninstall.


Post back any developments

Cheers

Dave

http://www.sevenforums.com/bsod-help-support/277143-random-bsod-error-0x00000124-primarily-during-gaming.html
Relevancy 80.84%

Hi, bought my pc a few days and apparently something came defective, I'm having these BSOD error 0x00000124 constantly, sometimes, when it occurs, the pc does not start anymore, is
appearing BSOD whenever I try to start or even freezes the bios boot screen, or else the monitor does not detect the video signal, thought to be sofware problem, then formatted the pc and
not installed the drivers, only the network driver and the GPU, and the error continues, now suspect that be the motherboard.

The files are SF_Diagnostic_Tool when I had not updated the bios yet, but already updated and errors continue.

Sorry about my google translator english.

A:Random BSOD error 0x00000124 and boot freezing

Hello Leandrob02 and welcome to the Forums,

All dump files point to the following cause;

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 124, {0, fffffa800d4c2028, b2000000, 100402}

Probably caused by : GenuineIntel

Followup: MachineOwner
---------
Usual cause: Fatal hardware error.
More info Bug check 0x124.

Please preform the following hardware scans;

Stress test the CPU with IntelBurnTest.


   Note
When IntelBurnTest has crashed your system, please continue by following the BSOD posting instructions.

----------

Stress test the CPU with Prime95.


   Tip
Be sure to keep an eye on your temperatures when running these tests, especially the Large FFTs. We recommend the free utility Speedfan.


   Note
As with all hardware tests, Prime95 is not fail-safe. If the test passes for 2 hours with no errors, it is most likely to be stable. Unfortunately, it sometimes makes mistakes and gives a clean bill of health to faulty hardware.


   Note
When Prime95 has crashed your system, please continue by following the BSOD posting instructions.

----------

Stress test the graphics card using Furmark GPU Stress Test.


   Information
During the test please check the screen for artifacts.
The purpose of this test is to make your machine crash and create dump files so that we can pinpoint the cause of your problem.



   Tip
Please run Furmark once when your machine has just started, and once again when your machine has been active for several hours.
Good luck and keep us posted,
Nommy

http://www.sevenforums.com/bsod-help-support/305837-random-bsod-error-0x00000124-boot-freezing.html
Relevancy 80.84%

Hello I'm having a problem with my computer I built it error 7 Random Crash, Windows BSOD 0x00000124 myself and overclocked it not too long ago maybe about - months ago It passed all the stress tests fine when I overclocked and it was running great but after about weeks later it started to bluescreen once in a while and since then it's been BSOD Random Windows 7 Crash, error 0x00000124 bluescreen I noticed that when it's cooler in my room it doesn't bluescreen as often but usually it bluescreens ones a day Before it displays the BSOD it freezes for about - seconds then BOSD shows BSOD Random Windows 7 Crash, error 0x00000124 up Now for some reason its not creating the error log in minidump folder I even have the correct settings but it still doesn't create the logs So I decided to take a picture with my cell phone It does blue screen even if I'm not playing any games I'm using h water cooler and I got i K overclocked to Any ideas Please help because I cannot figure out what the problem is Thank you in advance

A:BSOD Random Windows 7 Crash, error 0x00000124

The stop code 0x124 is normally indicative of hardware failure, there is not much information that it provides, but I can tell you right now from the sounds of things it is being caused by your overclocking and is likely crashing so hard that it does not have time to generate the needed dump files. Chances are all you need to do is stop over clocking and return your system to its normal speeds to rid yourself of this problem.

http://www.sevenforums.com/bsod-help-support/283266-bsod-random-windows-7-crash-error-0x00000124.html
Relevancy 79.98%

Very frustrated here. Persistent random BSOD's when streaming video or gaming. Local repair shop ran diagnostics on all hardware, said everything checked out fine on stress tests. Have upgraded video card thinking that might be the culprit, to no avail. Did a fresh install of Win 7, to no avail.

Please help, I'm out of my depth at this point.

A:Random BSOD only when playing video or gaming, error 0x00000124

Hi lynesjc,

Looks like you may have a hardware related issue:






Quote:
0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.







Quote:
Descriptor @ fffffa8005266148
Section @ fffffa80052662d0
Offset : 664
Length : 264
Flags : 0x00000000
Severity : Fatal
Error : DCACHEL1_DRD_ERR (Proc 0 Bank 0)
Status : 0xb6532000ce000135
Address : 0x0000000026c5d900
Misc. : 0x0000000000000000
Section 0 : Processor Generic
-------------------------------------------------------------------------------
Descriptor @ fffffa80052660b8
Section @ fffffa8005266190
Offset : 344
Length : 192
Flags : 0x00000001 Primary
Severity : Fatal
Proc. Type : x86/x64
Instr. Set : x64
Error Type : Cache error
Operation : Data Read
Flags : 0x00
Level : 1
CPU Version : 0x0000000000100f43
Processor ID : 0x0000000000000000



Looks like you may have a problem with either your L1 cache or Processor.

This error does not always indicate a failure in the processor, it can be caused by problems with the BIOS or system drivers. But as you can see from Section 0 that this was a failure during a read operation of the L1 processor cache.

Checked your BIOS and it is up-to-date according to your manufacture.






Quote:
http://support.asus.com/download.aspx?SLanguage=en&m=M4A785TD-V+EVO&os=29









Quote:
[BIOS Information (Type 0) - Length 24 - Handle 0000h]
Vendor American Megatrends Inc.
BIOS Version 2105
BIOS Starting Address Segment f000
BIOS Release Date 07/23/2010
BIOS ROM Size 100000


Outdated driver:

fffff880`047d9000 fffff880`047e1000 SSPORT SSPORT.sys Fri Aug 12 00:07:32 2005 (42FBDA34)

Refers to: Samsung printer driver, driver can be found here:






Quote:
http://www.samsung.com/us/support/downloads




If you no longer use Samsung Printer let me know and I will show you how to delete the driver.

We need to stress test your processor which will help determine whether a hardware issue exists.

Follow the tutorial and download the correct Prime95 for your system, found here:






Quote:
http://www.sevenforums.com/tutorials/100352-hardware-stress-test-prime95.html


Check back with any results

Cheers
Dave

http://www.sevenforums.com/bsod-help-support/279146-random-bsod-only-when-playing-video-gaming-error-0x00000124.html
Relevancy 79.98%

My computer used to show the BSOD occasionally when using Adobe Bridge or Photoshop. In the last couple of weeks it is happening so frequently as to make those programs unusable. It can also happen seemingly at random with other programs, although less computer intensive programs run fine.

I get an "Uncorrectable hardware error" with error code 0x00000124. I've run MDSCHED to check the memory but it shows no issues. The computer works fine in Safe Mode.

I would be grateful if anyone could offer assistance.

A:Frequent random BSOD with error 0x00000124 using Abobe products

Hi Karadog

I presume you have the P8P67 DELUXE motherboard

Your BIOS is outdated ... running at version 1503.

Please upgrade it to Version 3602.. This has lots of stability fixes and other improvements.

Please update and then let me know if it BSOD's

http://www.sevenforums.com/bsod-help-support/298498-frequent-random-bsod-error-0x00000124-using-abobe-products.html
Relevancy 78.26%

Hi, these bluescreens and random crashes started about 1 month ago while playing games or when using chrome, ie, firefox. I have located this error with BlueScreenView.exe and like the topic says the thing causing these crashes is ntoskrnl.exe+4ade0c and the bug check code is 0x00000124.

I visited and "fixed" my pc at the local store witch i used to purchase my current pc from, every problem i've had, they have fixed it except this one. They just don't know how to fix it or don't know what the problem is.

Tried to fix pc via installing dvd, it recognized the problem somehow saying the error is something called 1035 but thats it, even my windows installing dvd cant help me this time. any help?
and i attached this minidump rar to this thread.

A:Random windows 7 crashes, ntoskrnl.exe+4ade0c, 0x00000124, 1035.

OK so took a look at the files you provided, and right off the bat I should inform you that a 0x124 error is 9 times out of 10 a hardware problem. looking at the error record we can see that the error its self is a Bus error and in my experience this points to either a CPU failure or a mother board failure, however it could also be overheating or a BIOS bug.


Code:
kd> !errrec fffffa8007e7f6a8
===============================================================================
Common Platform Error Record @ fffffa8007e7f6a8
-------------------------------------------------------------------------------
Record Id : 01ce5dd4a5d37641
Severity : Fatal (1)
Length : 928
Creator : Microsoft
Notify Type : Machine Check Exception
Timestamp : 5/31/2013 7:58:41 (UTC)
Flags : 0x00000002 PreviousError

===============================================================================
Section 0 : Processor Generic
-------------------------------------------------------------------------------
Descriptor @ fffffa8007e7f728
Section @ fffffa8007e7f800
Offset : 344
Length : 192
Flags : 0x00000001 Primary
Severity : Fatal

Proc. Type : x86/x64
Instr. Set : x64
Error Type : BUS error
Operation : Generic
Flags : 0x00
Level : 3
CPU Version : 0x0000000000100f43
Processor ID : 0x0000000000000000

===============================================================================
Section 1 : x86/x64 Processor Specific
-------------------------------------------------------------------------------
Descriptor @ fffffa8007e7f770
Section @ fffffa8007e7f8c0
Offset : 536
Length : 128
Flags : 0x00000000
Severity : Fatal

Local APIC Id : 0x0000000000000000
CPU Id : 43 0f 10 00 00 08 04 00 - 09 20 80 00 ff fb 8b 17
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00

Proc. Info 0 @ fffffa8007e7f8c0

===============================================================================
Section 2 : x86/x64 MCA
-------------------------------------------------------------------------------
Descriptor @ fffffa8007e7f7b8
Section @ fffffa8007e7f940
Offset : 664
Length : 264
Flags : 0x00000000
Severity : Fatal

Error : BUSLG_GENERIC_ERR_*_TIMEOUT_ERR (Proc 0 Bank 4)
Status : 0xfa00000000070f0f
So to start if you are overclocking anything please stop, over clocking pushes hardware beyond its limmits and can often cause these kind of errors.

Next please download one of the following tools to monitor system temperatures:

HWinfo
CPU Z <- this one is for the CUP only and will not monitor any other components temperatures.

Once you have one of those installed plead download and run the following CPU stress test:

Free Software - GIMPS






Quote:
Prime95 Setup:
- extract the contents of the zip file to a location of your choice
- double click on the executable file
- select "Just stress testing"
- select the "Blend" test. If you've already run MemTest overnight you may want to run the "Large FFTs" test instead.
- "Number of torture test threads to run" should equal the number of CPU's times 2 (if you're using hyperthreading).
The easiest way to figure this out is to go to Task Manager...Performance tab - and see the number of boxes under CPU Usage History
Then run the test for 6 to 24 hours - or until you get errors (whichever comes first).
The Test selection box and the stress.txt file describes what components that the program stresses.


Keep an eye on your temperatures and report them here when the test is done/ when it crashes or starts to throw errors.

http://www.sevenforums.com/bsod-help-support/291998-random-windows-7-crashes-ntoskrnl-exe-4ade0c-0x00000124-1035-a.html
Relevancy 77.83%

Hello and thank you for your help.

I have been receiving a lot of crashes lately. Thought it was the HD so replaced it. Still happening.

I have 3 cards in my system; GTX560ti for graphics, Firewire card for Steinberg MR816csx audio interface, and and UAD-2 processing card for audio plugins.

I thought it was a conflict with my devices and tried to smooth them all out, then I got this last error which is new.

Any ideas?

thanks you in advance!

Kurt

A:BSOD using Cubase 7, Error:APC_INDEX_MISMATCH, Address:ntoskrnl.exe+75

I have a studio using Sonar X2. I used to have a firewire device (Focusrite Saffire Pro 40) but had issues with it and replaced it with a USB connected Roland Octa-Capture (and a backup MAudio Fastrack Ultra 8R).

I didn't look at your zip file, but the APC Index Mismatch is GENERALLY a driver issue. Did it work OK (never crash) and recently start? or has it always had crash problems?

If it is a recent problem, what has been recently updated? Especially hardware drivers.

http://www.sevenforums.com/bsod-help-support/295415-bsod-using-cubase-7-error-apc_index_mismatch-address-ntoskrnl-exe-75-a.html
Relevancy 76.97%

For the past 3 weeks, I have been receiving blue screens serval times.

Each time, the caused of the error reports has been "Wdf01000.sys" and address at ntoskrnl.exe+74a90.

I've attached 3 dmp files to this post.

Any help is appreciated! Thanks.

A:BSOD , error 0x1000007e, caused by Wdf01000.sys, address ntoskrnl.exe

Hello and welcome to Sevenforums.

For whatever reason I wasn't able to open your dumps. This can be caused by the BSOD, not obtaining the rest of the files and information needed to complete the dump.
Just to be sure, see if your minidump configuration is intact with the one below.






Quote:
To ensure minidumps are enabled:

* Press Start, in the Search Box type: "sysdm.cpl" (without the quotes), press Enter.
* Select the Advanced tab, click on Startup and Recovery Settings.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information headline select Small memory dump (256 kB) in the dropdown box.
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK till you're out of the dialogue.
* Reboot if changes have been made.


Also please provide a full report of your crash. Different files are missing from your zip file. This includes a nfo, driver lists, system report etc. To get these files, use our thread below.

http://www.sevenforums.com/crashes-d...tructions.html

Thank you!

Best Regards,
Frederik.

http://www.sevenforums.com/bsod-help-support/246228-bsod-error-0x1000007e-caused-wdf01000-sys-address-ntoskrnl-exe.html
Relevancy 76.54%

Hi Wondering having too much BlueScreen at my Windows After Installing the New OS Past about Week a Ago I must add this statement which i even have BSOD during watiching Youtube forExample No Heavy Process The Common Reason watching BlueScreenView is Hal dll and ntoskrnl exe x As i searched about these days it caused by drivers mostly but i do have most updated drivers Run the Intel Update Program Noting is needed to Update Now im posting this there is just a SM Bus Drivers Listed warning 0x00000124 BSOD [ntoskrnl.exe] [hal.dll] in Device Manager outdated but i did update that before but when i Did a Restore Point BSOD 0x00000124 [hal.dll] [ntoskrnl.exe] again Gone on a Warning Section Also Some Drivers Are OutDated Like The Picture Below I will Update them all Specification MainBoard Asus z - Deluxe VGA MB ATI AMD Radeon HD Series Sapphire PCPartner RAM GB Dual-Channel DDR MHz CPU Intel Core i K GHz OS Windows Pro -bit In Searches i had it came a common problem in asusz and intel isnt The LOG is Uploaded and Attached thanks for Response hope it will be Ok

A:BSOD 0x00000124 [hal.dll] [ntoskrnl.exe]

Code:
7: kd> .bugcheck
Bugcheck code 0000009F
Arguments 00000000`00000003 ffffe001`2639b470 ffffd000`c6daa960 ffffe001`28470bc0

7: kd> !devstack ffffe0012639b470
!DevObj !DrvObj !DevExt ObjectName
ffffe00128c2f050 \Driver\pctNdisMP ffffe00128c2f1a0 InfoMask field not found for _OBJECT_HEADER at ffffe00128c2f020

> ffffe0012639b470 \Driver\PnpManager 00000000 Cannot read info offset from nt!ObpInfoMaskToOffset

!DevNode ffffe0012639a010 :
DeviceInst is "ROOT\S4E_PCTNDISMP\0005"
ServiceName is "pctNdisMP"

7: kd> lmvm pctNdis64
start end module name
fffff801`18c00000 fffff801`18c16000 pctNdis64 T (no symbols)
Loaded symbol image file: pctNdis64.sys
Image path: \SystemRoot\system32\DRIVERS\pctNdis64.sys
Image name: pctNdis64.sys
Timestamp: Wed Jul 07 22:37:30 2010 (4C34F39A)
CheckSum: 0001D422
ImageSize: 00016000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4


Your PC Tools internet security driver is almost 5 years old, bound to cause problems.
I suggest you remove the internet security package altogether.


Code:
Descriptor @ ffffe000be7f2138
Section @ ffffe000be7f22c0
Offset : 664
Length : 264
Flags : 0x00000000
Severity : Fatal

Error : DCACHEL0_WR_ERR (Proc 3 Bank 1)
Status : 0xbf80000000000124
Address : 0x00000001a8cb2a00
Misc. : 0x0000000000000086

+0x000 McaErrorCode : 0x124 // 0000 0001 0010 0100


A generic write error on the level 0 cache of processor #3, memory bank 1.
This is consistent in this specific memory bank, menaing it's almost certainly a failing CPU.
If it's under warranty then now is the time to RMA it.

http://www.eightforums.com/bsod-crashes-debugging/62500-bsod-0x00000124-hal-dll-ntoskrnl-exe.html
Relevancy 76.54%

I've been getting BSOD very consistently over the past few days. I've attached my SF Diagnostic Tool ZIP. According to BlueScreenView, these are the culprits that are reported for the crash:

hal.dll+12a3b
ntoskrnl.exe+18cb03

I can't seem to find any consistency to when it crashes. Sometimes it does it while I'm working on things (Outlook, Chrome, EditPlus, Excel, etc.). Sometimes it does it when I'm not even at the computer. It does seem to be getting more frequent though.

I don't overclock.
I haven't changed any hardware for about a year now.
I'm currently in the process of making sure all my drivers are up to date.

Please let me know if there is anything else I can supply to help figure this out.

Thanks in advance for all of your help.

A:BSOD 0x00000124 Not sure of cause. hal.dll, ntoskrnl.exe

A "stop 0x124" is fundamentally different to many other types of bluescreens because it stems from a hardware complaint. Stop 0x124 minidumps contain very little practical information, and it is therefore necessary to approach the problem as a case of hardware in an unknown state of distress. You can read more on this error and what to try here... Stop 0x124 - what it means and what to try: Stop 124 - What it means and what to try

http://www.sevenforums.com/bsod-help-support/308996-bsod-0x00000124-not-sure-cause-hal-dll-ntoskrnl-exe.html
Relevancy 75.68%

Hi,

My ASUS laptop (i5-450M, 4GB, NVIDIA Geforce 310m) has several DSOD (0x00000124) daily
Please help me to determine the cuase of this crash.

Thank you

ssamnang

A:BSOD 0x00000124 cause by ntoskrnl.exe+80640

Code:
BugCheck 124, {0, fffffa8005153028, ba000000, 400405}

Probably caused by : GenuineIntel

Code:
Usual causes: Hardware, Incompatibility, May be driver corruption

Code:
===============================================================================
Section 2 : x86/x64 MCA
-------------------------------------------------------------------------------
Descriptor @ fffffa8005153138
Section @ fffffa80051532c0
Offset : 664
Length : 264
Flags : 0x00000000
Severity : Fatal

Error : Internal unclassified (Proc 0 Bank 5)
Status : 0xba00000000400405
The first parameter or argument has the value of 0x0, which is a Machine Check Exception, which means the CPU has detected a hardware problem and the address points to a processor error because the CPU has found one, so it could be a different form of hardware which is causing the issue.

Update:


Code:
0: kd> lmvm igdkmd64
start end module name
fffff880`04846000 fffff880`05269040 igdkmd64 T (no symbols)
Loaded symbol image file: igdkmd64.sys
Image path: igdkmd64.sys
Image name: igdkmd64.sys
Timestamp: Thu Oct 13 20:05:43 2011 (4E973687)
CheckSum: 00A2C5BD
ImageSize: 00A23040
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Your Intel graphics card driver seems to be a possible cause, please check for updates from here - Intel? Driver Update Utility

Furthermore, since a Stop 0x124 is a hardware related BSOD, then I would suggest testing the CPU CPU - Stress Test Using IntelBurnTest I'm sure the Intel graphics card is either integrated into the CPU or the motherboard.
Stop 0x124 - what it means and what to try
All the hardware seeming to be running stable and tests reporting no errors, could mean a bad motherboard.

-----------------------------------------------------------

Side Notes:

These steps are not strictly related to the BSOD, but are highly recommended steps to improve your system.

Install and perform full scans with:Malwarebytes : Free anti-malware download
Microsoft Security Essentials | Protect against viruses, spyware, and other malware


   Information
Remember to install the free version of Malwarebytes not the free trail; untick the free trial box during installation. MSE is the most lightweight and compatible with the Windows 7 operating system

You can also view this thread for a complete free and lightweight security protection combination:Good and Free system security combination.
You appear to have only 26 Windows Updates installed, whereas, I have 205 Windows Updates, please install all the Important and Recommended Windows Updates for your system. These will bring many stability and performance improvements to the operating system, but most importantly will also improve the security of your system.Start
Type: Windows Update
Check for Updates/Install Updates
Reboot (if prompted)

http://www.sevenforums.com/bsod-help-support/294065-bsod-0x00000124-cause-ntoskrnl-exe-80640-a.html
Relevancy 75.68%

I've cleaned my computer with an air compressor within the last week and I have no overclocking. CPU temps are on idle at around 30C and I've never seen GPU temps above 60C when I run World of Warcraft.

But I still get BSOD 0x00000124 sometimes...

Thanks for any help.

Relevancy 75.68%

So i got this bsod when playing. Had this same issues many times when installed OS and thought it is driver issue or something. Reinstalled OS and had bsod again.
New hardware is cpu what i installed, never had bsod on old prosessor

Did check temps with Coretemp while playing and didnt get even over 50?.

Did run memtest last night with 5 passes without errors and Furmark for GPU with 75? max.
Any compatibility issues or something with new cpu with Memory or something. Please help

http://www.sevenforums.com/bsod-help-support/388688-bsod-when-playing-0x00000124-hal-dll-ntoskrnl-exe.html
Relevancy 75.68%

Hey, so I recently started to get these BSOD randomly now. Not sure what it could be and tried everything I know, plus some things I researched.

x64
Full Retail - What is the age of system (hardware)? Oldest part would be the HD from 2009, and motherboard 2010
- What is the age of OS installation Fresh Install
I have this happen on old ram, and brand new ram as well. I think the cause is a faulty motherboard.
Reason why is I have two slots that died out on me, so I sent out a request for an RMA,

Thanks,
EDIT here is what bluescren view says
00000000`00000003
fffff800`02e566f0
fffff800`02e566f0
5958504b`00240005
tcpip.sys
tcpip.sys+147430

A:BSOD random Error ntoskrnl.exe

  
Quote: Originally Posted by Tai2323


Hey, so I recently started to get these BSOD randomly now. Not sure what it could be and tried everything I know, plus some things I researched.

x64
Full Retail - What is the age of system (hardware)? Oldest part would be the HD from 2009, and motherboard 2010
- What is the age of OS installation Fresh Install
I have this happen on old ram, and brand new ram as well. I think the cause is a faulty motherboard.
Reason why is I have two slots that died out on me, so I sent out a request for an RMA,

Thanks,
EDIT here is what bluescren view says
00000000`00000003
fffff800`02e566f0
fffff800`02e566f0
5958504b`00240005
tcpip.sys
tcpip.sys+147430




These crashes were caused by memory corruption (probably a driver). Please run these two tests to verify your memory and find which driver is causing the problem.

If you are overclocking anything reset to default before running these tests.
In other words STOP!!!
1-Memtest.





Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.



RAM - Test with Memtest86+

2-Driver verifier






Quote:
I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.


Driver Verifier - Enable and Disable
Further Reading
Using Driver Verifier to identify issues with Windows drivers for advanced users

http://www.sevenforums.com/bsod-help-support/201076-bsod-random-error-ntoskrnl-exe.html
Relevancy 75.68%

Hello,

Since two weeks, I had been fighting to find any solution to my problem but in vain. So i decided to ask here for some help. I swap RAM, HDD, GPU , PSU but in vain. I think that my CPU may be failing.
I attached 2 minidump to this thread since I just re-install win again.

A:Random BSOD ntoskrnl + hal.dll error

Post it following the Blue Screen of Death (BSOD) Posting Instructions.

http://www.sevenforums.com/bsod-help-support/316349-random-bsod-ntoskrnl-hal-dll-error.html
Relevancy 74.82%

Game crashes during gameplay (most notably The Old Republic) but also in other situations (Photoshop CS4 plugin HDR Effex Pro).

Windows 7 64 bit Ultimate
Asus Formula Crosshair IV MB
16GB Corsair DDR3 1333 GHz
580 GTX nVidia
160GB SSD
2 TB WD HD
Corsair GS800 power supply

I've been having this issue with various games, with varying frequency. Batman Arkham Asylum, Skyrim, Mass Effect, and most notably The Old Republic. ToR crashed multiple times today (see minidump attachment.) Also, using Nik Effex HDR Effex Pro (a CS4 plugin) has elicited this BSOD.

Any comments and suggestions would be greatly appreciated.

Thanks,

Alendi

A:BSOD: 0x00000124; ntoskrnl.exe+4b16cc - during gaming, mostly

Hi.
You have the Stop 0x124 error.
Stop 0x124 - what it means and what to try

http://www.sevenforums.com/bsod-help-support/205108-bsod-0x00000124-ntoskrnl-exe-4b16cc-during-gaming-mostly.html
Relevancy 74.82%

Hello, I have been having a BSOD problem for a while now and i have figured out it is caused by ntoskrnl.exe. This BSOD has been going on since April when I built my PC. I have already completely replaced my RAM, done a full virus scan, and checked to make sure there are no overclocks on any hardware. It usually happens when gaming, but sometimes it will happen randomly (like when web browsing and other applications). Please help.

Thanks!

http://www.sevenforums.com/bsod-help-support/383758-bsod-stop-0x00000124-caused-ntoskrnl-exe.html
Relevancy 74.82%

Hi i am new to this, i keep getting blue screen at random and dont know how to debug minidump file and i am running out of patience with this pc thanks in advance and that is the most recent one ive had.

On Thu 18/10/2012 13:23:57 GMT your computer crashed
crash dump file: C:\Windows\Minidump\101812-68344-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x87AE9)
Bugcheck code: 0x24 (0x1904FB, 0xFFFFF880089F3618, 0xFFFFF880089F2E70, 0xFFFFF80002CE444F)
Error: NTFS_FILE_SYSTEM
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft? Windows? Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates a problem occurred in the NTFS file system.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver which cannot be identified at this time.

A:BSOD at random times, error ntoskrnl.exe

Welcome

Please upload your msinfo32.nfo file. To get this:
Click on the Start
Type msinfo32 into the Search programs and files box
When it opens, go to File, Save
Save as msinfo32.nfo and save in a place you will remember
Let it finish the process of gathering and saving the system info
Right click the .nfo file, click send to compressed (zipped) folder
Upload the .zip file here.

Post a screen shot with crystal disk info:CrystalDiskInfo - Software - Crystal Dew World
Screenshots and Files - Upload and Post in Seven Forums

Run Disk Check on your hard disk for file system errors and bad sectors on it:Disk Check

Hard drive test both short and long with: SeaTools for Windows

Also the DOS version of:SeaTools for DOS

http://www.sevenforums.com/bsod-help-support/259245-bsod-random-times-error-ntoskrnl-exe.html
Relevancy 74.82%

window7 x64 pro that I've installed about a year ago.
4gb ram
the hardware is 2.5 years old full retail

hey guys.

the BSOD has started after installing system mechanic.
uninstalled it and it didn't help.

is it a hardware malfunction?

thanks in advances
aviad

A:Random BSOD ntoskrnl.exe error 0x00000001

  
Quote: Originally Posted by Supershmup


window7 x64 pro that I've installed about a year ago.
4gb ram
the hardware is 2.5 years old full retail

hey guys.

the BSOD has started after installing system mechanic.
uninstalled it and it didn't help.

is it a hardware malfunction?

thanks in advances
aviad




Virtually all 47 of these are identical. There is very little practical information in them as to its cause. The specific error code is:

The APC_INDEX_MISMATCH bug check has a value of 0x00000001. This indicates that there has been a mismatch in the APC state index.

We can certainly find what the cause is eventually but I wonder since these only started after you installed system mechanic wouldnt it be easier to restore a backup, or do a clean reinstall?

Here are a few of the current problems
Old drivers

Code:
ElRawDsk.sys 7/26/2008 12:59:09 PM fffff880`03dd6000 fffff880`03de0000 0x0000a000 0x488b65ed
btwl2cap.sys 4/3/2009 7:28:45 PM fffff880`08d29000 fffff880`08d35000 0x0000c000 0x49d6a9bd
How To Find Drivers:




Quote:
- search Google for the name of the driver
- compare the Google results with what's installed on your system to figure out which device/program it belongs to
- visit the web site of the manufacturer of the hardware/program to get the latest drivers (DON'T use Windows Update or the Update driver function of Device Manager).
- if there are difficulties in locating them, post back with questions and someone will try and help you locate the appropriate program.


- - The most common drivers are listed on this page: Driver Reference Driver Reference
- - Driver manufacturer links are on this page: Drivers and Downloads
The remnants of a previous AVG installation that needs to be removed.
Download tools and utilities | AVG Worldwide

Sptd.sys

Please remove any CD visualization programs such as Daemon Tools and Alcohol 120%.

They use a driver, found in your dmp, called sptd.sys, that is notorious for causing BSODs.

Use this SPTD uninstaller DuplexSecure - Downloads DuplexSecure - FAQ

when you're done you can use this Freeware:

MagicISO Virtual CD/DVD-ROM
(MagicDisc)

in its place

Using MagicISO to create ISO image files

Only after all of these have been corrected can we attempt to find the many underlying problems.

http://www.sevenforums.com/bsod-help-support/198113-random-bsod-ntoskrnl-exe-error-0x00000001.html
Relevancy 74.82%

Hello

I am having random BSOD issues, just recently i download blue screen view
and at the top of the list it has ntoskrnl.exe that seemed to be causing the issue.

I will upload the minidump file if that makes things easier, besides that i don't know much else to report on, help is appreciated.

Thanks

A:Random BSOD error 0x0000003B ntoskrnl.exe

Yes it does make things easier, go ahead and post it
http://www.sevenforums.com/crashes-d...tructions.html

http://www.sevenforums.com/bsod-help-support/253015-random-bsod-error-0x0000003b-ntoskrnl-exe.html
Relevancy 74.82%

Hello Around Christmas time I purchased a brand new Acer Aspire laptop Since the very first day I bought it I began to experience BSOD errors while casually doing things such as browsing photos on Facebook or just plain using my laptop Recently though these crashes haver been occurring more and more often and I do not know how to prevent them from happening It's at the point where it will do it many times a day up to six times an hour It's crashes, error BSOD ntoskrnl.exe random very frustrating and I have the BSOD random crashes, ntoskrnl.exe error feeling that it may be having an effect on parts of my computer causing it to slow down etc From what I've read in the dump reports all of the BSOD errors seem to be related BSOD random crashes, ntoskrnl.exe error to the ntoskrnl exe file When it crashes the screen goes into almost rectangular tears from the left side of the screen to the other I am not the greatest with computers but I do know my basic way around them Here are some of my system specs System Hardware Age Six months Age of OS Installation Six months It came pre-installed I don't have a Windows installation disk System Manufacturer Acer Aspire Laptop OS Windows Home Premium -bit Graphics Card AMD Radeon HD G Display Generic PnP Monitor quot HD LED LCD Resolution x Hard Drive GB HDD Mouse Razer Naga Internet Speed Average mbps - mbps Other Info AMD Quad Core Processor AB- M GB DDR Memory Installed DDR PC - DDR PC - DDR non-ECC Also I am currently using Norton Internet Security for virus protection I've attached a system health report and my dump files into a zip folder

A:BSOD random crashes, ntoskrnl.exe error

Hello Vmoppy. Welcome to Seven Forums. The BCCodes presented suggest possible memory corruption. Please follow this tutorial. RAM - Test with Memtest86+ You should let the test run over night. If you get any error codes, pull all but one stick and test in each lane. Take note of the behavior while doing so.

Also, your BIOS may need to be updated. Acer Support: Downloads & Support Documents - Notebook / Aspire / Aspire 7560


Code:
AlcoholAutomount "c:\program files (x86)\alcohol soft\alcohol 120\axautomntsrv.exe" -automount Brook-PC\Brook HKU\S-1-5-21-966909496-1433074955-2235090737-1000\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
Please remove Alcohol. It is known to cause issues.

You also have both McAffee family protection and Norton Internet Security installed. Please remove both, at least for testing and install Microsoft Security Essentials.

Razer Mice can be problematic, please remove and replace with a generic mouse for now.


Code:
Start Menu\Programs\AVG PC TuneUp 10.0.0.27 PreCracked Brook-PC\Brook:Start Menu\Programs\AVG PC TuneUp 10.0.0.27 PreCracked Brook-PC\Brook
Also delete. And with that, download and install Malwarebytes, the free version(do not start free trial). Run a full scan on all user accounts. Also, run a full scan with Microsoft Security Essentials.

http://www.sevenforums.com/bsod-help-support/237171-bsod-random-crashes-ntoskrnl-exe-error.html
Relevancy 74.82%

Greetings, I was hoping someone would help me with my BSOD ntoskrnl.exe issue as I've experiencing them randomly throughout the day but not quite enough to the point it would cripple my PC. I had this issue a year ago that was fixed by simply running Memtest86+ through a few passes on all RAM modules and I found out that 2 out of 3 of my sticks had errors all over them. I smartened up a bit when I replaced them several months back by running them through the same test and fortunately none of them had any errors.

I tried digging through the other similar ntoskrnl.exe threads but to no avail, also tried running each stick in 4-7 passes and none of them displayed any errors.

Any help and insight would be greatly appreciated

A:Random BSOD, Error ntoskrnl.exe+cca4a

Hello and welcome thunderkiss first up the memtest mate should be run at least 8 passes unless errors come up straight away but if you are satisfied with what you have done try these for starters the files I am not real sure so do these first

http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html

http://www.sevenforums.com/tutorials/433-disk-check.html< DO NOT runon a SSD

http://www.superantispyware.com/

http://www.malwarebytes.org/products/malwarebytes_free/

http://www.bleepingcomputer.com/download/adwcleaner/

download from bleeping computer

http://www.sevenforums.com/bsod-help-support/315116-random-bsod-error-ntoskrnl-exe-cca4a.html
Relevancy 74.82%

Hi all


So I have this issue in windows 10 where the keyboard of my laptop stops responding at random instances . None of the keys work. That is soon followed by BSOD and a " Driver Power state failure error message". When forcing the computer to restart by pressing the power button resolves the issue . But the keyboard still stops at random intervals. I have already check all the drivers and they are up to date and there are no yellow explanation marks in device manager and updated
i have run Blue screen viewer and attached the log from that . In all instances it appears the guilty party is " ntoskrnl.exe" but i cannot find any other info on how to resolve this . Can anyone please help?

edit: also added the dump files as zip

http://www.tenforums.com/bsod-crashes-debugging/62537-bsod-random-error-0x0000009f-ntoskrnl-exe.html