Windows Support Forum

new laptop, BSOD caused by ntoskrnl.exe+7f1c0?

Q: new laptop, BSOD caused by ntoskrnl.exe+7f1c0?

Hello i recently got a new HP Pavillion dv - c us about a week ago Code caused by ntoskrnl.exe+7f1c0? laptop, BSOD new Intel Core i - M GB DDR RAM x GB x GB GB RPM Hard Drive - x -bit new laptop, BSOD caused by ntoskrnl.exe+7f1c0? or x - Windows Home Premium bit - the original installed OS on the system - Yes - an OEM or full retail version - OEM - What is the age of system hardware NEW - What is the age of OS installation have you re-installed the OS NEW Today i received a BSOD while new laptop, BSOD caused by ntoskrnl.exe+7f1c0? listening to turntable fm For those who dont know what turntable fm is its like pandora but theres DJ's that take turns new laptop, BSOD caused by ntoskrnl.exe+7f1c0? playing music i have no idea how that can give me a BSOD Having only gotten this laptop a week ago i was terrifed So i restarted my computer and restored to a previous point and everything seemed normal until i noticed my physical memory was at when i had nothing open usually it is at Windows and BIOS is reading the laptop only having GBs of RAM when it has really GBs So i reinsert the GB ram stick and everything is back to normal Hours later i was listening to turntable fm again and i was able to recreate the same BSOD im guessing the gb ram stick is going bad idk Heres a BSODScreen viewer dump Code Dump File - - dmp Crash Time AM Bug Check String KMODE EXCEPTION NOT HANDLED Bug Check Code x e Parameter ffffffff c Parameter Parameter Parameter Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe f c File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win sp gdr - Processor x Crash Address ntoskrnl exe f c Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size edit i also ran a memtest and both rams seems to pass should i do - passes i decided to experment and found that if i switch around the ramsticks in the slots i found when i put the gb ramstick into the gb original ramslot the computer would now sometimes read gbs of ram instead of sometimes reading gb of ram from earlier so im guessing the ramslot where the gb ramstick originally sat is faulty or i could be wrong idk

Relevancy 100%
Preferred Solution: new laptop, BSOD caused by ntoskrnl.exe+7f1c0?

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: new laptop, BSOD caused by ntoskrnl.exe+7f1c0?

Please follow the http://www.sevenforums.com/crashes-d...tructions.html so we can help you.

Stephen

http://www.sevenforums.com/bsod-help-support/234089-new-laptop-bsod-caused-ntoskrnl-exe-7f1c0.html
Relevancy 84.01%

I have had a new system built, Had it for almost 2 weeks and been getting the BSOD at least 2x a day. Ihave been browsing the web and had it happen, been playing online games and have it happen. Have even come home after work to find that the computer crashed and had to be restarted because of it. Dont know what to do. Can you help me?
Thank you in advance.

A:BSOD : Caused by address : ntoskrnl.exe+7f1c0

Hello,






Quote:
Start Menu\Programs\Advanced SystemCare with Antivirus 2013 Public:Start Menu\Programs\Advanced SystemCare with Antivirus 2013 Public


This program, Advanced SystemCare, is known to cause problems with windows. It modifies the registry, and could cause even more errors. Please uninstall. Since this comes with an anti-virus, i suggest using Microsoft Security Essentials - Free Antivirus for Windows in place.


Code:
Start Menu\Programs\DAEMON Tools Lite Public:Start Menu\Programs\DAEMON Tools Lite Public
Daemon Tools are also know to cause problems with windows. Please uninstall also.






Quote:
Probably caused by : memory_corruption


This shows memory corruption, so try running a RAM - Test with Memtest86+ to make sure the RAM isn't bad.


Code:
ctac32k.sys Wed Jul 2 03:38:22 2008 (486B3E7E)
Drivers before 2009 are known to cause problems aswell. Please update: Creative Worldwide Support

After all is done please post back results.

-Justin

http://www.sevenforums.com/bsod-help-support/243938-bsod-caused-address-ntoskrnl-exe-7f1c0.html
Relevancy 84.01%

I'm decent with computers, but I've definitely managed to end up a bit over my head with this one. I've got 4 different BSODs due to this one file now, all at seemingly random times. One while running Guild Wars 2, several while trying to run HULU via Chrome, and one while moving Chrome from one screen to the other. I even managed to get one in Safe Mode and one while trying to load into Safe Mode. Even got one while checking the C Drive for errors. I have never in my life seen a BSOD outside of Windows, so I know something is definitely wrong. I figured I'd come in here and ask what you guys think instead of tinkering around with stuff and possibly making it worse.

A:BSOD Caused By Driver ntoskrnl.exe (+7f1c0)

Welcome

What antivirus are you using? I cannot see any listed.

Problematic software:

Code:
Start Menu\Programs\DAEMON Tools Lite Public:Start Menu\Programs\DAEMON Tools Lite Public
Please uninstall Daemon Tools, it's known to cause BSODs. Search our forum for evidence.


Code:
STOP 0x0000003B: SYSTEM_SERVICE_EXCEPTION
Usual causes: System service, Device driver, graphics driver, ?memory
BugCheck 3B, {c000001d, fffffa8010e0d060, fffff880045c2ad0, 0}
Probably caused by : ntkrnlmp.exe ( nt!KiSystemServiceHandler+7c )
.................................
fffff880`045c25a0 fffff880`0f507ad1Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
nvlddmkm+0xd9ad1
.................................
2: kd> lmvm nvlddmkm
start end module name
fffff880`0f42e000 fffff880`101f0000 nvlddmkm T (no symbols)
Loaded symbol image file: nvlddmkm.sys
Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
Image name: nvlddmkm.sys
Timestamp: Tue May 15 13:35:36 2012 (4FB20748)
CheckSum: 00DA5E91
ImageSize: 00DC2000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Please update your graphic card drivers to their latest.
Click on the Start ► Control Panel ► Programs ► Uninstall a program ► Uninstall the NVIDIA related stuff and use Driver Sweeper to remove any remaining drivers of NVIDIA. Get the latest version installed from the manufacturers website.

4 of your dumps indicate problems with memory.

Code:
STOP 0x00000109: CRITICAL_STRUCTURE_CORRUPTION
Usual causes: Device driver, Breakpoint set with no debugger attached, Hardware (Memory in particular)
BugCheck 109, {a3a039d89e8db8ba, b3b7465ef10a8810, fffff80003930d10, 1}
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : memory_corruption
Take memtest. Run for 8 passes and test each stick in a know good slot for an additional 6 passes.
RAM - Test with Memtest86+
Guide to using Memtest86+ - Geeks to Go Forums

Follow this strategy:





Quote:
The goal is to test all the RAM sticks and all the motherboard slots.

Check your motherboard manual to ensure the RAM sticks are in the recommended motherboard slots. Some motherboards have very specific slots required for the number of RAM sticks installed.

If you get errors, stop the test and continue with the next step.

1. Remove all but one stick of RAM from your computer (this will be RAM stick #1), and run Memtest86 again, for 7 passes.
Be sure to note the RAM stick, use a piece of tape with a number, and note the motherboard slot.
If this stick passes the test then go to step #3.

2. If RAM stick #1 has errors, repeat the test with RAM stick #2 in the same motherboard slot.
If RAM stick #2 passes, this indicates that RAM stick #1 may be bad. If you want to be absolutely sure, re-test RAM stick #1 in another known good slot.
If RAM stick #2 has errors, this indicates another possible bad RAM stick, a possible motherboard slot failure or inadequate settings.
3. Test the next stick of RAM (stick #2) in the next motherboard slot.
If this RAM stick has errors repeat step #2 using a known good stick if possible, or another stick.
If this RAM stick has no errors and both sticks failed in slot#1, test RAM stick #1 in this slot.
4. If you find a stick that passes the test, test it in all the other motherboard slots.

If Part 2 testing shows errors, and all tests in Part 3 show errors, you will need to test the RAM sticks in another computer and/or test other RAM in your computer to identify the problem.

In this way, you can identify whether it is a bad stick of RAM, a bad m... Read more

http://www.sevenforums.com/bsod-help-support/259506-bsod-caused-driver-ntoskrnl-exe-7f1c0.html
Relevancy 83.08%

Keep getting these BSOD when playing COD MW3. Have run memtest86+4.2 and tests passed. Here is my SF Diagnostics report. Would appreciate your help solving this problem

A:BSOD playing COD MW3 error caused by ntoskrnl.exe+7f1c0

Welcome

Most of your dumps show memory as the issue.

Lets start with problematic software:

Code:
Start Menu\Programs\DAEMON Tools Pro Public:Start Menu\Programs\DAEMON Tools Pro Public
Start Menu\Programs\BitDefender 2011 Public:Start Menu\Programs\BitDefender 2011 Public
Start Menu\Programs\Autodesk Public:Start Menu\Programs\Autodesk Public
Daemon tools is a known cause of blue screens. If you search this forum, you will find a lot of threads about it.
Please uninstall BitDefender and Autodesk while we are troubleshooting with your computer.

MSE is recommended by almost all members on our forum and known to be the most compatible antivirus with windows 7.
Microsoft Security Essentials - Free Antivirus for Windows

Run the system file checker 3 times as mentioned in the tutorial below:
SFC /SCANNOW Command - System File Checker

To make sure that hard drive is good run disk check following this tutorial:
Disk Check

Hard drive scan usings SeaTools:
SeaTools | Seagate both long and short tests.

You need to run memtest for 8 passes on each stick preferably overnight.
Guide to using Memtest86+ - Geeks to Go Forums

Let us know your results

http://www.sevenforums.com/bsod-help-support/253293-bsod-playing-cod-mw3-error-caused-ntoskrnl-exe-7f1c0.html
Relevancy 104.49%

Hello,

I'm having blue screen errors on my Laptop which is only a couple weeks old and otherwise running fine. The BSODs aren't that many, maybe once a week while using the computer daily. Once it apparently was caused by me plugging in my USB mouse. Already did a memtest and chkdsk without result. Diagnostic tool files are attached. Any help is greatly appreciated!

A:BSOD in ntoskrnl.exe+7f1c0 on new Laptop Win 7 64 bit

Hello,

It looks like the first two BSODs were caused by old Razer mouse drivers. Install updated ones from here: Razer Support


Code:
copperhd.sys Tue Nov 10 02:50:17 2009 (4AF91B39)
The last one may have been caused by hardware. Try running the three Prime95 tests: Hardware - Stress Test With Prime95

...Summary of the dumps:

Code:

Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
Debug session time: Sun Aug 5 05:57:28.338 2012 (UTC - 4:00)
System Uptime: 0 days 0:01:04.368
*** WARNING: Unable to verify timestamp for copperhd.sys
*** ERROR: Module load completed but symbols could not be loaded for copperhd.sys
Probably caused by : copperhd.sys ( copperhd+16c9 )
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
BUGCHECK_STR: 0x50
PROCESS_NAME: razerhid.exe
FAILURE_BUCKET_ID: X64_0x50_copperhd+16c9
BiosReleaseDate = 04/20/2012
SystemProductName = Aspire V3-571G
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
Debug session time: Thu Jul 26 15:20:29.268 2012 (UTC - 4:00)
System Uptime: 0 days 0:01:24.298
*** WARNING: Unable to verify timestamp for copperhd.sys
*** ERROR: Module load completed but symbols could not be loaded for copperhd.sys
Probably caused by : copperhd.sys ( copperhd+16c9 )
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
BUGCHECK_STR: 0x50
PROCESS_NAME: razerhid.exe
FAILURE_BUCKET_ID: X64_0x50_copperhd+16c9
BiosReleaseDate = 04/20/2012
SystemProductName = Aspire V3-571G
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
Debug session time: Mon Jul 23 17:07:06.194 2012 (UTC - 4:00)
System Uptime: 0 days 11:18:47.226
*** ERROR: Module load completed but symbols could not be loaded for Ntfs.sys
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : ntkrnlmp.exe ( nt!FsRtlTeardownPerStreamContexts+e2 )
BUGCHECK_STR: 0xc2_7
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0xc2_7_nt!FsRtlTeardownPerStreamContexts+e2
BiosReleaseDate = 04/20/2012
SystemProductName = Aspire V3-571G
??????????????????????????????????????????????????????????????????????????????????????``

http://www.sevenforums.com/bsod-help-support/244838-bsod-ntoskrnl-exe-7f1c0-new-laptop-win-7-64-bit.html
Relevancy 89.87%

I have been getting a BSOD in my fresh Windows install, I'm running Windows 7 Pro x64 (MSDNAA).

I had done a clean install after I got a couple of BSOD f4 but now I'm still getting the same BSOD! I've already collected some dump with and without running Driver Verifier.

Before clean install I updated my BIOS, I updated SSD firmware and I runned a memtest: my ram passed the test.

sfc /scannow report: "Windows Resource Protection did not find any integrity violations."

When I runned Windows_NT6_BSOD_v3.03_jcgriff2_.exe I got a BSOD because of HIDCLASS.SYS

Hopefully i can get some help here

PS: sorry for my poor English

A:BSOD f4, ntoskrnl.exe-7f1c0

Problem Devices:
Code:
ehdrv ROOT\LEGACY_EHDRV\0000 This device is not present, is not working properly, or does not have all its drivers installed.
epfwwfp ROOT\LEGACY_EPFWWFP\0000 This device is not present, is not working properly, or does not have all its drivers installed.
Network Controller PCI\VEN_168C&DEV_0023&SUBSYS_3071168C&REV_01\5&D93DF5B&0&0800E6 The drivers for this device are not installed.
Security Processor Loader Driver ROOT\LEGACY_SPLDR\0000 This device is not present, is not working properly, or does not have all its drivers installed.
Was the crash report jcgriff2 executable run in Safe Mode? Make sure the above drivers get installed to provide system stability. If you need help with the drivers, fill in your system specs in your profile and not in a post in this thread: System Info - See Your System Specs
What kind of memtest did you run? How many passes?

Your crashes primarily indicate hard disk problems. This could mean hard disk corruption, bad sectors, a failing hard disk, Windows files or registry corruption, viruses, or memory problems.If you are overclocking any hardware, please stop.

Run Disk Check with both boxes checked for all HDDs and with Automatically fix file system errors checked for all SSDs. Post back your logs for the checks after finding them using Check Disk (chkdsk) - Read Event Viewer Log (you may need to search for wininit instead of chkdsk).
For any drives that do not give the message:
Windows has checked the file system and found no problems
run disk check again as above. In other words, if it says:
Windows has made corrections to the file system
after running the disk check, run the disk check again.

Run the short and long tests with SeaTools for HDDs.SeaTools for Windows

SeaTools for DOS
If you have an SSD, make sure the following are up to date:SSD firmware
BIOS Version
Chipset Drivers
Hard disk controller drivers/SATA drivers
If you have a Marvell IDE ATA/ATAPI device, uninstall it in device manager and see if the system performs better.

Download and install Malwarebytes, update it, do not start the free trial, and then run a full scan. Also run a full scan with your antivirus software installed on your system. If you do not have antivirus software installed, see the Good and Free system security combination. for better security steps and scanning tools. Make sure to update the security software before running the full scan.

Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).


   Warning
Before you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. WARNING: The steps that follow can void your warranty!!!

For Part 3: If You Have Errors: If you swap any memory components, follow these steps for ESD safety:Shut down and turn off your computer.
Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working. If you do not have an anti-static workbench, desk, or pad, you can use your computer tower/case by fi... Read more

http://www.sevenforums.com/bsod-help-support/232749-bsod-f4-ntoskrnl-exe-7f1c0.html
Relevancy 88.58%

My wife's Sony Vaio (VPCEE41FD) laptop has been acting up over the last few nights.
It would hang up on shutting down, taking sometimes over an hour+

Just tonight it decided to BSOD stating driver_power_state_failure ntoskrnl.exe+7f1c0
If I recall, I think this happened about a month ago as well.
Nothing was being done at the time of the BSOD and I have it set to not hibernate or sleep, just power off the display.

Any suggestions or help are greatly appreciated. Thank you in advance.
Attached is the requested/required diagnostic logs from the SF Diag Tool.

A:bsod driver_power_state_failure ntoskrnl.exe+7f1c0

Welcome aboard, Risk.

► I suggest you to uninstall Avast, right now. It is must in your situation.
Use Microsoft Security Essentials - Free Antivirus for Windows, with Windows firewall.
Avast firewall is causing a huge lot of troubles there.

► And, update your Atheros network adapter driver, from ATHEROS drivers for Microsoft Windows (Atheros?????).

Code:
0: kd> lmvm athrx
start end module name
fffff880`04426000 fffff880`045a5000 athrx T (no symbols)
Loaded symbol image file: athrx.sys
Image path: \SystemRoot\system32\DRIVERS\athrx.sys
Image name: athrx.sys
Timestamp: Sat Nov 07 02:26:02 2009 (4AF48D62)
CheckSum: 00185986
ImageSize: 0017F000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
You can see that the driver installed is very old.

► ATI Video Driver is causing equal troubles.

Code:
kd> lmvm atikmpag
start end module name
fffff880`04185000 fffff880`041b9000 atikmpag T (no symbols)
Loaded symbol image file: atikmpag.sys
Image path: \SystemRoot\system32\DRIVERS\atikmpag.sys
Image name: atikmpag.sys
Timestamp: Tue Jul 13 15:21:00 2010 (4C3C3704)
CheckSum: 00030E73
ImageSize: 00034000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
It is also very old and needs an update. Get it from AMD Support & Drivers.

► Auslogics is not a good example of a program. I recommend Puran Defrag.

Let us know the situation.

http://www.sevenforums.com/bsod-help-support/254023-bsod-driver_power_state_failure-ntoskrnl-exe-7f1c0.html
Relevancy 88.58%

I have been getting a BSOD in my newly installed system

and ive included the files in this post as you asked for before posting

I am running Win 7 x64 OEM i bought it together with the parts for my system which you can see in my signature. it is only nearly 4 weeks old, i did put the system together myself for the first time .

hopefully i can get some help here

Btw the OS is installed on my Corsair SSD.

A:BSOD ntoskrnl.exe-7f1c0 while idling

And i runned a memtest today also and My ram Passed The test

http://www.sevenforums.com/bsod-help-support/228812-bsod-ntoskrnl-exe-7f1c0-while-idling.html
Relevancy 88.58%

My computer working always good most bsod coming without reason on a day i seeing not reason for this pc have not many load ram test with memtest working over houres without problems here bsod logs anybody have without 7f1c0 BSOD reason? ntoskrnl.exe idea sorry for my bad english this crash coming on a burnintest Code Dump File - - dmp Crash Time Bug Check String PAGE FAULT IN NONPAGED AREA Bug Check Code x Parameter fffffd c c c Parameter Parameter fffff a Parameter Caused By Driver win k sys Caused By Address win k BSOD without reason? ntoskrnl.exe 7f1c0 sys b File Description Product Name Company File Version Processor x Crash Address ntoskrnl exe f c Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size thois coming without load Code Dump File - - dmp Crash Time Bug Check String PAGE FAULT IN NONPAGED AREA Bug Check Code x Parameter fffffaa b Parameter Parameter fffff f Parameter Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe f c File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win sp gdr - Processor x Crash Address ntoskrnl exe f c Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time Bug Check String PAGE FAULT IN NONPAGED AREA Bug Check Code x Parameter fffffa c c c b Parameter Parameter fffff d f Parameter Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe f c File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win sp gdr - Processor x Crash Address ntoskrnl exe f c Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time Bug Check String PAGE FAULT IN NONPAGED AREA Bug Check Code x Parameter fffffa c ee b Parameter Parameter fffff c d f Parameter Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe f c File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win sp gdr - Processor x Crash Address ntoskrnl exe f c Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time Bug Check String PAGE FAULT IN NONPAGED AREA Bug Check Code x Parameter fffffa c feb Parameter Parameter fffff b e Parameter Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe f c File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win sp gdr - Processor x Crash Address ntoskrnl exe f c Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size thanks

A:BSOD without reason? ntoskrnl.exe 7f1c0

Hello Halloworld and welcome to Sevenforums.

To be able to help you, we'd need you to attach some files in order for us to analyse your crash. The below link will guide you through some steps for catching these files. If you have any questions just ask us.

http://www.sevenforums.com/crashes-d...tructions.html

Best Regards,
Frederik.

http://www.sevenforums.com/bsod-help-support/243648-bsod-without-reason-ntoskrnl-exe-7f1c0.html
Relevancy 87.72%

Hi,

3 days ago I started randomly getting blue screens with DRIVER_POWER_STATE_FAILURE ntoskrnl.exe+7f1c0.

The first time it happened I was playing diablo3, the second time browsing a website, and the third time today I went away from my computer for a few hrs and came back to a blue screen.

I would like to add the only thing that's changed hardware wise is I am using a new keyboard the logitec g110 with a g9x mouse plugged into it. (I'm not sure if this would cause a blue screen error but figured I would mention it in case).

Any help would greatly be appreciated, Thanks!

A:BSOD DRIVER_POWER_STATE_FAILURE casued by ntoskrnl.exe+7f1c0

Caused by "ASUS Charger Driver", it's probably best to uninstall it, I've had some bad experiences with similar software.

fffff880`00dec000 fffff880`00dede80 AiCharger Wed May 05 10:37:36 2010 (4BE12E50)

http://www.sevenforums.com/bsod-help-support/246583-bsod-driver_power_state_failure-casued-ntoskrnl-exe-7f1c0.html
Relevancy 87.72%

Hi All

I built a custom machine a month ago and been receiving very strange BSODs all with the same message for the last month.

All drivers are upto date including the SSD as primary and the BIOS

What happens is intermittent and my machine freezes for a few seconds then eventually starts BSOD and memory dumping.

I have done a full memtest, hdd check, gfx card stress test etc. All is good.

Theres even times I can be going for 12 hours straight without issues so Im not able to reproduce it unfortunately.

Attached are the diag tools outputs

Any help of course is greatly appreciated

Thx

Maroof

A:BSOD ntoskrnl.exe+7f1c0 CRITICAL_OBJECT_TERMINATION randomly

Hardware
I see you have an SSD installed. SSD drivers are a common cause of BSOD's, in particular Crucial M4's with outdated firmware. Make sure that the following is up to date:








  
Quote: Originally Posted by writhziden


SSD Firmware
BIOS Version
Chipset Drivers
Hard disk controller drivers/SATA drivers
Marvell IDE ATA/ATAPI controllers (older drivers for these are especially problematic)



Software
Run a full system scan with Malwarebytes.
Malwarebytes : Free anti-malware download

http://www.sevenforums.com/bsod-help-support/244611-bsod-ntoskrnl-exe-7f1c0-critical_object_termination-randomly.html
Relevancy 87.72%

Hello recently I have just built my new computer and everything seemed to playing BSOD computer, while ntoskrnl.exe+7f1c0 using be going fine However I had gotten a BSOD when trying to copy a large amount of file from my external Although I BSOD while playing using computer, ntoskrnl.exe+7f1c0 didn't get the dump file of it as that wasn't BSOD while playing using computer, ntoskrnl.exe+7f1c0 in the settings at the time I assumed it was due to copying from the external and just copied smaller files and it hasn't happened again However I was just playing League of Legends and my computer decided to randomly BSOD So I downloaded SF Diagnostic Tool and zipped the folder so I was wondering as what the problem is BlueScreenView says the crash address is ntoskrnl exe f c and I wasn't sure if this was a hardware or BSOD while playing using computer, ntoskrnl.exe+7f1c0 software problem as I have only received the parts less than a week ago My specs are Gigabyte Z -D H motherboard Intel Core i - processor gig of Corsair Vengeance RAM GeForce GTX graphics card Any help would be greatly appreciated

A:BSOD while playing using computer, ntoskrnl.exe+7f1c0

Welcome aboard, Balvedius

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 50, {fffff6a000022640, 0, fffff80002eb4b2b, 5}
Could not read faulting driver name
Probably caused by : memory_corruption ( nt!MiAgeWorkingSet+1d1 )
At first, you are to run RAM - Test with Memtest86+ . run it for 8 passes.

As the crash is hardware related, you are suggested to take two more testsHardware - Stress Test With Prime95, and
run chkdsk/F/R, using the method two of the tutorial Disk Check.

Let us know the results.

http://www.sevenforums.com/bsod-help-support/250256-bsod-while-playing-using-computer-ntoskrnl-exe-7f1c0.html
Relevancy 87.72%

Computer keeps BSOD after trying to wake it from sleep mode, or even if the monitor just powers off via power save options. Installed latest video drivers and windows updates to no avail. Thanks in advance for the help!

A:BSOD after sleep mode ntoskrnl.exe+7f1c0

hi
The last dump refers to msahci.sys... which is related to you Hard Dirve..

Check you bios to see if it is set to AHCI ...

http://www.sevenforums.com/bsod-help-support/244004-bsod-after-sleep-mode-ntoskrnl-exe-7f1c0.html
Relevancy 87.72%

I built a new PC back in June and have been receiving numerous BSOD's and have just been working through it until now, can you help me with it? I have attached the dump files as outlined in the SF Diagnostic Tool. I have the following:

asrock z77 extreme6 board
Curcial M4 SSD
Kingston 8GB 1600 CL9 (not the issue as I get the same BSOD when using GSkill RipJaws
Intel I5-3570K

I have checked through the mini dumps numerous times but cannot figure it out. Any help would be great.

A:BSOD ntoskrnl.exe+7f1c0 Vista Driver

I didn't mean to put sfc /scannow in subject line. Let me know if I didn't post correctly and I can repost... please help someone

http://www.sevenforums.com/bsod-help-support/250445-bsod-ntoskrnl-exe-7f1c0-vista-driver.html
Relevancy 86.86%

Hi everyone i have been having this issue intermittently I do some heavy gaming with no problems at all Batllefield on Ultra for - hours straight Most times this BSOD happens when i have left a torrent to download or i am simply opening a folder in explorer or browsing a web page I have researched this error many many times and have done several things to see if i can fix it myself they are as follows Checked RAM memtest and swapped sticks etc Upgraded firmware for SSD as i heard Vertex was known for BSODs Used the OS just on my Seagate HDD with the SSD uninstalled removed Replaced RAM with Corsair Vengeance GB had BSOD within - hours Made sure i am only using the two main intel GB SATA ports for SSD and HDD set to AHCI Am only running MSE as an antivirus I am BSOD ntoskrnl.exe+7f1c0, Bug Check - 0x000000f4 Random eager for help and will take any advice i can from the wealth of knowledge on these boards Kindly see attached my uploaded documents BSOD Random - ntoskrnl.exe+7f1c0, Bug Check 0x000000f4 and please don't hesitate to ask for more if they are needed Kindest regards Daco

A:BSOD Random - ntoskrnl.exe+7f1c0, Bug Check 0x000000f4

Bluetooth is disabled. Is this deliberate? If so, why? Please re-enable the Bluetooth and update it. Once updated, feel free to disable it again.

Dirty bit is set on the G: drive. There are only 2 ways to fix this:
- run CHKDSK /R /F from and elevated (Run as adminstrator) Command Prompt
- fully format the drive
You can physically remove/disconnect the drive also
I'd suggest running hard drive diagnostics on ALL drives: Hard Drive Diagnostic Procedure

Triple check to make sure you're not using the Marvell controller.
Ensure that the Marvell Controller drivers are the latest available from the manufacturer.

Western Digital software dates from 2008. Please uninstall it.

100 mHz overclock in one of the memory dumps. Is this deliberate, or is there an auto-overclocking app present on the system (sorta like Turbo mode). If there is, please disable it - they've been known to cause BSOD's

Memory dumps seem to point towards a hard drive problem. I'd strongly suggest that you check all hard drives attached to the system - both internal and external (USB) - using this link: Hard Drive Diagnostic Procedure

The following info is just FYI, I've already addressed the issues that I saw in the above paragraphs

- Further info on BSOD error messages available at: http://www.carrona.org/bsodindx.html
- Info on how to troubleshoot BSOD's (DRAFT): http://www.carrona.org/userbsod.html
- How I do it: http://www.carrona.org/howidoit.html

3RD PARTY DRIVERS PRESENT IN THE DUMP FILES
Code:

jraid.sys Tue Aug 10 05:28:44 2010 (4C611BCC)
mv91xx.sys Fri Aug 27 05:49:22 2010 (4C778A22)
mvxxmm.sys Fri Aug 27 05:49:03 2010 (4C778A0F)
amdxata.sys Fri Mar 19 12:18:18 2010 (4BA3A3CA)
MpFilter.sys Fri Mar 09 06:05:26 2012 (4F59E3F6)
asmtxhci.sys Wed Feb 23 21:25:47 2011 (4D65C1AB)
HECIx64.sys Tue Oct 19 19:33:43 2010 (4CBE2AD7)
e1c62x64.sys Tue Sep 21 17:34:15 2010 (4C9924D7)
btath_bus.sys Thu Jun 24 02:17:43 2010 (4C22F887)
RTKVHD64.sys Tue Nov 23 05:14:08 2010 (4CEB93F0)
asmthub3.sys Wed Feb 23 21:25:56 2011 (4D65C1B4)
wdcsam64.sys Wed Apr 16 04:39:08 2008 (4805BB2C)
cpuz135_x64.sys Wed Sep 21 04:23:41 2011 (4E799F0D)
nvlddmkm.sys Tue May 15 03:35:36 2012 (4FB20748)
btath_rcp.sys Thu Jun 24 02:17:21 2010 (4C22F871)
btfilter.sys Tue Mar 08 01:15:22 2011 (4D75C97A)
btath_a2dp.sys Mon Feb 14 20:47:47 2011 (4D59DB43)
btath_hcrp.sys Tue Jun 29 05:30:43 2010 (4C29BD43)
btath_flt.sys Thu Jun 24 02:17:38 2010 (4C22F882)
btath_lwflt.sys Mon Sep 13 04:26:54 2010 (4C8DE04E)

http://www.carrona.org/drivers/driver.php?id=jraid.sys
http://www.carrona.org/drivers/driver.php?id=mv91xx.sys
http://www.carrona.org/drivers/driver.php?id=mvxxmm.sys
http://www.carrona.org/drivers/driver.php?id=amdxata.sys
http://www.carrona.org/drivers/driver.php?id=MpFilter.sys
http://www.carrona.org/drivers/driver.php?id=asmtxhci.sys
http://www.carrona.org/drivers/driver.php?id=HECIx64.sys
http://www.carrona.org/drivers/driver.php?id=e1c62x64.sys
http://www.carrona.org/drivers/driver.php?id=btath_bus.sys
http://www.carrona.org/drivers/driver.php?id=RTKVHD64.sys
http://www.carrona.org/drivers/driver.php?id=asmthub3.sys
http://www.carrona.org/drivers/driver.php?id=wdcsam64.sys
http://www.carrona.org/drivers/driver.php?id=cpuz135_x64.sys
http://www.carrona.org/drivers/driver.php?id=nvlddmkm.sys
http://www.carrona.org/drivers/driver.php?id=btath_rcp.sys
http://www.carrona.org/drivers/driver.php?id=btfilter.sys
http://www.carrona.org/drivers/driver.php?id=btath_a2dp.sys
http://www.carrona.org/drivers/driver.php?id=btath_hcrp.sys
http://www.carrona.org/drivers/driver.php?id=btath_flt.sys
http://www.carrona.org/drivers/driver.php?id=btath_lwflt.sys

BSOD BUGCHECK SUMMARY

Code:

Loading Dump File [C:\Users\FUBAR\_jcgriff2_\dbug\__Kernel__\061312-6130-01.dmp]
Built by: 7601.17803.amd64fre.win7sp1_gdr.120330-1504
Debug session time: Wed Jun 13 02:00:08.741 2... Read more

http://www.sevenforums.com/bsod-help-support/234769-bsod-random-ntoskrnl-exe-7f1c0-bug-check-0x000000f4.html
Relevancy 86.86%

Hi there I recently updated my NVIDIA Drivers for my GTX from to and immediately received a BSOD when trying to start up Skyrim Since I did a clean install I had no drivers to rollback to so I decided to install the drivers which worked fairly well for about an hour I am now receiving BSODs every - hours from anything such as writing in a word document browsing facebook playing a game or looking at a vimeo video I am running dual monitors one hz and the primary hz with Displayfusion currently have disabled aero and the extended toolbar This was working fine before I updated my drivers I have ran a memtest NVIDIA after update Driver BSOD ntoskrnl.exe+7f1c0 with all positive results and I am running Driver Verifier with all non Microsoft drivers checked The latest crash was with Verifier running and while attempting to load a vimeo page The obvious answer would be to rollback to the NVIDIA drivers however I have a feeling there might be something else amiss I BSOD ntoskrnl.exe+7f1c0 after NVIDIA Driver update thought I might come here first before any more potential frustration and to stamp out any further issues I have attached the auto-compiled folder and a spec list Please let me know if there is any more information you would like me to provide Any help is appreciated

A:BSOD ntoskrnl.exe+7f1c0 after NVIDIA Driver update

Welcome aboard.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 124, {0, fffffa8005d30028, be200000, 5110a}

*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : hardware

Followup: MachineOwner
---------
Follow the guide Stop 0x124 - what it means and what to try, step by step!

http://www.sevenforums.com/bsod-help-support/257209-bsod-ntoskrnl-exe-7f1c0-after-nvidia-driver-update.html
Relevancy 86.86%

Hi,

I'm haveing some problems with my HTPC, when its going to sleep mode it usually gets a bsod, either right away or during the night.

I have all windows updates applied, i have updated the drivers, updated my ocz agility with newest firmware, tried other ram's also.

I have also tried reinstalling windows without success.

Would realy appriciate if anyone could give me some hints on whats causing this.

A:BSOD when the HTPC is in sleep mode ntoskrnl.exe+7f1c0

Hello Ray and welcome to Sevenforums.

SFC /scannow
We usually ask people to do this command to check if Windows is corrupted. It's the most common used one to check if the Windows files are corrupted. If it'll find errors, it'll restore them.



   Tip
If you're having a custom customization layer on your Aero, it's likely to get restored to default.
Press Start | search 'cmd' | Right-click it
| open as Admin | type SFC /SCANNOW

SFC /SCANNOW Command - System File Checker

Best Regards,
Frederik.

http://www.sevenforums.com/bsod-help-support/248880-bsod-when-htpc-sleep-mode-ntoskrnl-exe-7f1c0.html
Relevancy 86.86%

Is Windows 7 . . . x64 bit - the original installed OS on the system? windows 7 - an OEM or full retail version? OEM - What is the age of system (hardware)? 6 months - What is the age of OS installation 6 months

For a long time now i have been experiencing stop errors related to ntoskrnl.exe
they are not frequent and occur once every few days.

I would greatly appreciate any help regarding this issue and will be happy to provide any additional information
thanks,
tom

A:Random BSOD error 0x0000004e ntoskrnl.exe+7f1c0

Device Concerns:
Code:
NVIDIA High Definition Audio HDAUDIO\FUNC_01&VEN_10DE&DEV_0016&SUBSYS_10DE0101&REV_1001\5&37CB11FF&0&0001 This device is disabled.
NVIDIA High Definition Audio HDAUDIO\FUNC_01&VEN_10DE&DEV_0016&SUBSYS_10DE0101&REV_1001\5&37CB11FF&0&0101 This device is disabled.
VirtualBox Host-Only Ethernet Adapter ROOT\NET\0000 This device is disabled.
ASUS Bluetooth USB\VID_0B05&PID_179C\6&DF2EE03&0&7 This device is disabled.
NVIDIA High Definition Audio HDAUDIO\FUNC_01&VEN_10DE&DEV_0016&SUBSYS_10DE0101&REV_1001\5&37CB11FF&0&0201 This device is disabled.
NVIDIA High Definition Audio HDAUDIO\FUNC_01&VEN_10DE&DEV_0016&SUBSYS_10DE0101&REV_1001\5&37CB11FF&0&0301 This device is disabled.
Realtek 8185 Extensible 802.11b/g Wireless Device PCI\VEN_10EC&DEV_8185&SUBSYS_822510EC&REV_20\5&D93DF5B&0&0800E6 This device is disabled.
Were you aware of the above? If so, please explain your reasoning so we may understand your troubleshooting steps.
Software Concerns:You need to update to Kaspersky Internet Security 2012. 2011 may cause instability due to the age of the software.
You have a number of programs running. I would recommend that you Troubleshoot Application Conflicts by Performing a Clean Startup leaving only your security software enabled with startup and have services run on startup.

Code:
Start Menu\Programs\ASUS\AI Suite II Public:Start Menu\Programs\ASUS\AI Suite II Public
Start Menu\Programs\ASUS\Disk Unlocker Public:Start Menu\Programs\ASUS\Disk Unlocker Public
Start Menu\Programs\Driver Detective Public:Start Menu\Programs\Driver Detective Public
Recommend removing your ASUS utilities through Start Menu -> Control Panel -> Uninstall a program. They can provide software interfaces with the hardware for overclocking, and even when the overclock is not enabled, that interface can cause instability. They are also not needed for the system to function properly and may reduce system resources.

We do not recommend automated driver update software. It often finds drivers for devices similar to but not exactly the same as the hardware actually on the system. This can lead to conflicts and blue screen crashes. If you need help finding driver updates for a certain device, please start a thread in Drivers - Windows 7 Forums instead of using software. Driver updates are not always necessary and some updates can actually decrease system stability rather than increase it, so it is usually better not to update unless a device or its driver is causing problems with the system. If it ain't broke, don't fix it.

Analysis:It is difficult to find patterns with only one .dmp file. Yours points to memory problems or driver conflicts.If you are overclocking any hardware, please stop.

Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).


   Warning
Before you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. WARNING: The steps that follow can void your warranty!!!

For Part 3: If You Have Errors: If you swap any memory components, follow these steps for ESD safety:Shut down and turn off your computer.
Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
Hold down the power button for 30 seconds to close the circuit and ensure a... Read more

http://www.sevenforums.com/bsod-help-support/237699-random-bsod-error-0x0000004e-ntoskrnl-exe-7f1c0.html
Relevancy 86.86%

Hi,
I built the Ivy Bridge machine described in my system specs a couple of weeks ago, and all went well except that I am getting BSOD?s every few days 5 in all.
Bluescreen view shows them as MEMORY_MANAGEMENT from ntoskrnl.exe+7f1c0 or Ntfs.sys+a4990 though there is one IRQL_NOT_LESS_OR_EQUAL also from ntoskrnl.exe+7f1c0.
No obvious causes that I can see though they often happen in Firefox.
I have:-
Run memtest - all shows as good.
Run sfc /verifyonly no problems
Run Crystal Disk Info which shows Good on all 3 drives
Run the Check Drive for errors (from the drive properties)
So I am throwing myself on your mercy, and hoping you can point me at any further tests I should try.
I attach the zip as described in your howto (I hope).
Thanks in advance for whatever help you can provide.

A:BSOD on New Win7 x64 - ntoskrnl.exe+7f1c0 - random ~ every few days.

These crashes were caused by memory management probably a driver.
Please run these two tests to verify your memory and find which driver is causing the problem.

* If you are overclocking anything reset to default before running these tests.
In other words STOP!!!

* If you have a Raid update its Driver.

Memtest. If you havent run memtest for 6-8 passes please run it again, if you have start with driver verifier





Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5-7 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.



RAM - Test with Memtest86+


Driver Verifier






Quote:
Using Driver Verifier is an iffy proposition.
Most times it'll crash and it'll tell you what the driver is.
But sometimes it'll crash and won't tell you the driver.
Other times it'll crash before you can log in to Windows.
If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise.
Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation"IRP Logging and Force Pending I/O Requests. and click "Next"
NOTE: You can use Low Resource Simulation if you'd like.
From my limited experimentation it makes the BSOD's come faster.
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

If you are using win 8 add these
- Concurrency Stress Test
- DDI compliance checking
Reboot the system and wait for it to crash to the Blue Screen.
Continue to use your system normally, and if you know what causes the crash, do that repeatedly.
The objective here is to get the system to crash because Driver Verifier is stressing the drivers out.
If it doesn't crash for you, then let it run for at least 36 hours of continuous operation.
Reboot into Windows (after the crash) and turn off Driver Verifier by going back in and selecting "Delete existing settings" on the first page, then locate and zip up the memory dump file and upload it with your next post.
If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.

Thanks to JCGriff2 & Usasma.

Sysnative Forums

Driver Reference Table (DRT)




Using Driver Verifier to identify issues with Windows drivers for advanced users

Driver Verifier

Using Driver Verifier (Windows Drivers)

http://www.sevenforums.com/bsod-help-support/232306-bsod-new-win7-x64-ntoskrnl-exe-7f1c0-random-every-few-days.html
Relevancy 86.86%

I've been using ubuntu on a Live USB to compile some of my C homework I disabled wireless within ubuntu When I restarted into Windows I received an error about a hardware switch being turned off and was unable to use fn f to turn it back on I restarted my pc and went into the live usb again When I went back into windows the wireless was available but my computer BSOD's almost immediately after logging in I am able to boot into SafeMode with networking so Using BSOD on ntoskrnl.exe+7f1c0 Live USB After Ubuntu Boot I'm not sure if the wireless if the actual issue or a related event at all I have run chkdsk r memcheck and have rolled back and then reinstalled the new build of my graphics driver In BlueScreenView I see ntoskrnl exe and PSHED dll listed as the top two events and other BSOD on Boot ntoskrnl.exe+7f1c0 After Using Ubuntu Live USB threads said that PSHED dll was graphics related but that did not ultimately solve the issue I've BSOD on Boot ntoskrnl.exe+7f1c0 After Using Ubuntu Live USB attacked the MiniDump files I have too much ram for a full dump I've also attached the SF Results Thanks for any help that you may be able to offer

A:BSOD on Boot ntoskrnl.exe+7f1c0 After Using Ubuntu Live USB

Welcome aboard.

Here is your actual problem:

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

REGISTRY_ERROR (51)
Something has gone badly wrong with the registry. If a kernel debugger
is available, get a stack trace. It can also indicate that the registry got
an I/O error while trying to read one of its files, so it can be caused by
hardware problems or filesystem corruption.
It may occur due to a failure in a refresh operation, which is used only
in by the security system, and then only when resource limits are encountered.
Arguments:
Arg1: 0000000000000001, (reserved)
Arg2: fffff8a000024370, (reserved)
Arg3: 0000000001643000, depends on where Windows bugchecked, may be pointer to hive
Arg4: 0000000000000374, depends on where Windows bugchecked, may be return code of
HvCheckHive if the hive is corrupt.
In such a situation, you first boot into Advanced Boot Options, choose "last known good configuration" and hit enter, see if it boots or not.

In a deeper analysis of your dump, it indicates Kaspersky :

Code:
fffff880`08f4e838 fffff880`0471a7bfUnable to load image \SystemRoot\system32\DRIVERS\klif.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for klif.sys
*** ERROR: Module load completed but symbols could not be loaded for klif.sys
klif+0x267bf
When we see an Antivirus is there behind the crashes, we suggest to uninstall it and use Microsoft Security Essentials - Free Antivirus for Windows.

But, as the Registry is already corrupted, uninstalling Kaspersky will not bring it back to normal, it just will protect the system from getting more corrupt.

If both of those options fail, do SFC /SCANNOW : Run in Command Prompt at Boot

If it also failed, do a Clean Install Windows 7

Let us know the results.

EDIT: Uninstall the following programs:
Catalyst Control Center
DAEMON Tools Lite
Defraggler
MSI Afterburner
Free up the startup. (you have 30 programs in startup)

Click on the Start button
Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the “Startup” tab.
Deselect all items other than the antivirus.
Apply > OK
Accept the restart.

http://www.sevenforums.com/bsod-help-support/257276-bsod-boot-ntoskrnl-exe-7f1c0-after-using-ubuntu-live-usb.html
Relevancy 85.57%

Hi all,

The past month the laptop of a friend of my gives BSOD and he asked me for help.

His laptop systems specs are:

Microsoft Windows 7 Enterprise
HP EliteBook 8760w
Intel i7-2820QM CPU @ 2.30 ghz (8 CPU's)
Memory 16 gb

The BSOD appear random. Can anybody see something strange in the logs in the attachment.

Thank you all for looking at this thread.

A:Laptop random BSOD Probably caused by : ntoskrnl.exe

Out of the 3 crashdumps you provided, 2 show crashes that look like his video card drivers were involved. The drivers do look fairly old (August 24 2011) so make sure that he keeps em up to date. Other than that, I can say the crashdumps aren't sufficient enough to find exact cause right now.

Before I continue, I want to add that it's probably ill-advisable for him to seek assistance fixing a company laptop by a 'friend', and moreso when that friend is posting details of it to a public forum. Granted, there isn't anything entirely compromising of security from the JCGriff Report, but it doesn't matter. If it's company property, it should be best left to the company's IT department to resolve the issue.

http://www.sevenforums.com/bsod-help-support/228528-laptop-random-bsod-probably-caused-ntoskrnl-exe.html
Relevancy 84.28%

Windows 7 Pro x64
original installed OS
OEM

hardware is 2.5 years old
original installation of OS


Thanks for your help!!!

A:BSOD error ntoskrnl.exe+7f1c0 - lots of Chrome browser tabs open

Running the last 3 memory dumps (May and June 2012)

Do you have any idea of what this is (it's from your startups):





Quote:
MEI_Startup c:\script_temp\startup.cmd Public HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Run


If not, please run several of these free anti-malware scans to see if you're infected (and if your current protection is compromised): Free Online AntiMalware Resources

Your network drivers date from 2009 - please update them.

If the above doesn't solve your BSOD problems, please post back so we can suggest some further diagnostics.

Good luck!

The following info is just FYI, I've already addressed the issues that I saw in the above paragraphs

- Further info on BSOD error messages available at: http://www.carrona.org/bsodindx.html
- Info on how to troubleshoot BSOD's (DRAFT): http://www.carrona.org/userbsod.html
- How I do it: http://www.carrona.org/howidoit.html

3RD PARTY DRIVERS PRESENT IN THE DUMP FILES

Code:

L8042Kbd.sys Tue Aug 24 13:23:11 2010 (4C73FFFF)
MpFilter.sys Fri Mar 09 06:05:26 2012 (4F59E3F6)
SCDEmu.SYS Mon Apr 12 04:52:25 2010 (4BC2DF49)
amdxata.sys Fri Mar 19 12:18:18 2010 (4BA3A3CA)
dump_iaStorV.sys Thu Jun 10 20:46:19 2010 (4C11875B)
e1y62x64.sys Fri Jun 12 21:16:42 2009 (4A32FDFA)
iaStorV.sys Thu Jun 10 20:46:19 2010 (4C11875B)
igdkmd64.sys Fri Feb 11 14:16:32 2011 (4D558B10)
psi_mf.sys Wed Sep 01 03:53:14 2010 (4C7E066A)
sbmount.SYS Fri Jun 24 17:48:19 2011 (4E050623)
stcvsm.sys Fri Jun 24 17:45:59 2011 (4E050597)
vpchbus.sys Sat Nov 20 06:35:38 2010 (4CE7B28A)
vpcnfltr.sys Sat Nov 20 06:35:20 2010 (4CE7B278)
vpcusb.sys Sat Nov 20 06:35:31 2010 (4CE7B283)
vpcvmm.sys Sat Nov 20 06:35:48 2010 (4CE7B294)

http://www.carrona.org/drivers/driver.php?id=L8042Kbd.sys
http://www.carrona.org/drivers/driver.php?id=MpFilter.sys
http://www.carrona.org/drivers/driver.php?id=SCDEmu.SYS
http://www.carrona.org/drivers/driver.php?id=amdxata.sys
http://www.carrona.org/drivers/driver.php?id=dump_iaStorV.sys
http://www.carrona.org/drivers/driver.php?id=e1y62x64.sys
http://www.carrona.org/drivers/driver.php?id=iaStorV.sys
http://www.carrona.org/drivers/driver.php?id=igdkmd64.sys
http://www.carrona.org/drivers/driver.php?id=psi_mf.sys
http://www.carrona.org/drivers/driver.php?id=sbmount.SYS
http://www.carrona.org/drivers/driver.php?id=stcvsm.sys
http://www.carrona.org/drivers/driver.php?id=vpchbus.sys
http://www.carrona.org/drivers/driver.php?id=vpcnfltr.sys
http://www.carrona.org/drivers/driver.php?id=vpcusb.sys
http://www.carrona.org/drivers/driver.php?id=vpcvmm.sys

BSOD BUGCHECK SUMMARY


Code:

Loading Dump File [C:\Users\John\_jcgriff2_\dbug\__Kernel__\052512-35178-01.dmp]
Built by: 7601.17803.amd64fre.win7sp1_gdr.120330-1504
Debug session time: Fri May 25 13:11:36.081 2012 (UTC - 4:00)
System Uptime: 4 days 1:38:25.829
BugCheck 1A, {41790, fffffa80061fb840, ffff, 0}
Probably caused by : win32k.sys ( win32k!NtGdiCreateDIBSection+3e4 )
BUGCHECK_STR: 0x1a_41790
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
PROCESS_NAME: chrome.exe
FAILURE_BUCKET_ID: X64_0x1a_41790_win32k!NtGdiCreateDIBSection+3e4
Bugcheck code 0000001A
Arguments 00000000`00041790 fffffa80`061fb840 00000000`0000ffff 00000000`00000000
BiosVersion = 080015
BiosReleaseDate = 10/16/2009
SystemManufacturer = powerspec
SystemProductName = B667
MaxSpeed: 2660
CurrentSpeed: 2666
??????????????????????????????????????????????????????????????????????????????????????``
Loading Dump File [C:\Users\John\_jcgriff2_\dbug\__Kernel__\053112-30435-01.dmp]
Built by: 7601.17803.amd64fre.win7sp1_gdr.120330-1504
Debug session time: Thu May 31 19:55:52.468 2012 (UTC - 4:00)
System Uptime: 6 days 6:41:14.201
BugCheck 109, {a3a039d89f132868, 0, a9c65ba56d70b6e9, 101}
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : Un... Read more

http://www.sevenforums.com/bsod-help-support/235657-bsod-error-ntoskrnl-exe-7f1c0-lots-chrome-browser-tabs-open.html
Relevancy 83.85%

My Laptop randomly got a BSOD a few days ago and it has continued since. The laptop is just over two years old. I tried a system restore but it didn't solve the problem. The BSOD happens no matter what I am doing and sometimes the laptop reboots or freezes instead. Safe mode works perfectly. I tried memtest86 which showed no errors and ran for five passes. Bluescreenview showed ntoskrnl.exe consistently in each dump report. Diagnostics in attachment below. Please help. Thanks in advance.

A:Toshiba laptop randomly gets BSOD caused by driver ntoskrnl.exe

Welcome to the forum.

Lets start with Driver verifier:
Driver Verifier - Enable and Disable

As the dump is indicating memory corruption test your memory using Memtest86 for 8 passes:
RAM - Test with Memtest86+

Source





Quote:
tdcmdpst.sys
Toshiba ODD Writing Driver (CD/DVD)
http://www.csd.toshiba.com/cgi-bin/t.../jsp/home.jsp#


Update to the latest drivers for your Toshiba ODD as its of 2009 = quite old.


Code:
0: kd> lmvm tdcmdpst
start end module name
fffff880`041e2000 fffff880`041ec000 tdcmdpst T (no symbols)
Loaded symbol image file: tdcmdpst.sys
Image path: \SystemRoot\system32\DRIVERS\tdcmdpst.sys
Image name: tdcmdpst.sys
Timestamp: Thu Jul 30 14:39:35 2009 (4A715C47)
CheckSum: 0000BC23
ImageSize: 0000A000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Also do a hard disk test with Seatools
SeaTools for Windows | Seagate

Keep us posted.

http://www.sevenforums.com/bsod-help-support/250154-toshiba-laptop-randomly-gets-bsod-caused-driver-ntoskrnl-exe.html
Relevancy 78.69%

Got my first blue screen of death tonight had firefox opened one watching youtube video another browsing internet After bsod /adress (ntoskrnl.exe+72a40) caused by driver (ntoskrnl.exe) BSOD it restarted i login but just black screen with cursor ctrl alt delete worked so i shut my computer down Boot up normally after check my minidump file bsod cause BSOD caused by driver (ntoskrnl.exe) /adress (ntoskrnl.exe+72a40) by ntoskrnl exe Did little search on google find BSOD caused by driver (ntoskrnl.exe) /adress (ntoskrnl.exe+72a40) has to do with ram and hard drive Downloaded wd data life guard diagnostic for my mechanic drive which is healthy but my ssd on shows failed end to end error rate value threshold worst is all in SMART statue Im not sure if i can trust this wd diagnostic on my crucial ssd there are alot of unknown in SMART statue too Theres no ssd diagnotic for crucial there is a firmware not sure if it helps So i downloaded and ran crystaldiskinfo on my ssd health statues says good it doesnt say end to end error rate like wd Instead same ID B line says quot unused reserve nand blocks quot instead Is my ssd good i havent ran a test on my ram yet This is almost month old build Asrock x x killer i k gtx w crucial x gb crucial gb ssd wd blue tb Heres info of bsod with bluescreenview Bug Check String- IRQL GT ZERO AT SYSTEM SERVICE Bug Check Code - x a Parameter - dc a Parameter - Parameter - Parameter - fffff b Caused By Driver- ntoskrnl exe Caused By Address- ntoskrnl exe a File Description- NT Kernel amp System

A:BSOD caused by driver (ntoskrnl.exe) /adress (ntoskrnl.exe+72a40)

Blue Screen of Death (BSOD) Posting Instructions

http://www.sevenforums.com/bsod-help-support/367819-bsod-caused-driver-ntoskrnl-exe-adress-ntoskrnl-exe-72a40.html
Relevancy 73.1%

Hello I have had two BSODs this week one on Monday and the other one today Thursday Both occured within minutes after Windows had been started resumed from hibernation for the first time that day The same thing happened a few months ago I'm after / first of boot the BSODs 0x00000109 ntoskrnl.exe+7f1c0 day: beginning to see a pattern Other than these quot morning quot BSODs my laptop is operating quite stable It's being used about hours a day yet I have never had a BSOD other than those after the first start of the day Because of this BSODs after first boot of the day: 0x00000109 / ntoskrnl.exe+7f1c0 my gut BSODs after first boot of the day: 0x00000109 / ntoskrnl.exe+7f1c0 feeling is that this is more likely a hardware related BSOD Maybe some part or device is unable to handle the initial temperature rise after cooling down over night Although the laptop is always stored at room temperature Another pattern is that BlueScreenView displays the same values for all three BSODs in these columns Bug Check Code x Parameter a a d Parameter b b e Parameter fffff Parameter Crash Address ntoskrnl exe f c Minidump files are attached Event viewer shows no unusual events between Windows start and BSOD I'm using a genuine Windows copy always with the newest updates from Microsoft and my drivers and BIOS are up to date too BSODs after first boot of the day: 0x00000109 / ntoskrnl.exe+7f1c0 I'm currently running Driver Verifier to see if I can catch a BSOD this way My hardware checks so far RAM memtest found no errors after passes neither did Windows' own Memory Diagnostics Tool I even ran memtest again after letting the laptop cool down to see if the memory would behave differently but still no errors PSU Stated output is V I measured V Seems ok to me HDD Ran various tests HDD scans filesystem checks no errors or bad sectors Any suggestions or interpretations of my minidump files are appreciated

A:BSODs after first boot of the day: 0x00000109 / ntoskrnl.exe+7f1c0

Please upload your msinfo32.nfo file. To get this:
Click on the Start
Type msinfo32 into the Search programs and files box
When it opens, go to File, Save
Save as msinfo32.nfo and save in a place you will remember
Let it finish the process of gathering and saving the system info
Right click the .nfo file, click send to compressed (zipped) folder
Upload the .zip file here.

http://www.sevenforums.com/bsod-help-support/252683-bsods-after-first-boot-day-0x00000109-ntoskrnl-exe-7f1c0.html
Relevancy 71.81%

Have been facing the BSOD since last few days, unable to find out the exact issue which is creating the problem. Uploading the files as per the instructions. Please help whenever you can!

http://www.sevenforums.com/bsod-help-support/385879-bsod-caused-ntoskrnl-exe.html
Relevancy 71.81%

I'm getting random bluescreens caused by ntoskrnl.exe. Hope you can help me find the problem.


System Specs:
Operating System
Windows 7 Ultimate 64-bit SP1
CPU
AMD Phenom II X6 1050T 29 ?C
Thuban 45nm Technology
RAM
8.00GB Dual-Channel DDR3 @ 666MHz (9-9-9-24)
Motherboard
ASUSTeK Computer INC. M5A87 (AM3R2) 21 ?C
Graphics
V223W ([email protected])
2047MB NVIDIA GeForce GTX 660 (Gigabyte) 27 ?C
Storage
465GB Western Digital WDC WD5000AADS-00S9B0 ATA Device (SATA) 25 ?C
Optical Drives
ASUS DRW-24B1ST a ATA Device
Audio
Realtek High Definition Aud

Relevancy 71.81%

firstly i found it is my nivida (n2_dis.sys or something)then this time it says its the ntoskrnl.exe..what is it?how do i update it?i hope updating this would solve it as i got 3 bsod today again!!!

http://www.vistax64.com/crashes-debugging/261086-what-ntoskrnl-exe-caused-bsod.html
Relevancy 71.81%

I was having BSOD issues with windows 8, so I decided to just go back to 7 (since I wasn't liking 8 that much anyway.) I did a fresh install yesterday, and it's still crashing. I've attached the zip file as instructed, and if you need anything else, please let me know!

Windows 7 Professional 32-bit
2 GB RAM
Intel Pentium D dual-core 3.4 GHz
AMD Radeon HD 6450

A:BSOD caused by ntoskrnl.exe

This is a Stop 0x124 .... specially a hardware failure, but may de some hardware drivers also cause it in this case.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 124, {0, 858d2024, 0, 0}

Probably caused by : GenuineIntel

Followup: MachineOwner
---------

1: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 00000000, Machine Check Exception
Arg2: 858d2024, Address of the WHEA_ERROR_RECORD structure.
Arg3: 00000000, High order 32-bits of the MCi_STATUS value.
Arg4: 00000000, Low order 32-bits of the MCi_STATUS value.

Debugging Details:
------------------
BUGCHECK_STR: 0x124_GenuineIntel

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

PROCESS_NAME: System

CURRENT_IRQL: 0

STACK_TEXT:
8a913cc4 82914bad 858d2008 829acc68 829acc60 nt!WheapCreateTriageDumpFromPreviousSession+0x32
8a913ce4 829159d7 829acc60 858d2008 829acc90 nt!WheapProcessWorkQueueItem+0x56
8a913d00 828c0aab 829acc60 00000000 848d7d48 nt!WheapWorkQueueWorkerRoutine+0x1f
8a913d50 82a4cf5e 00000001 b2143c30 00000000 nt!ExpWorkerThread+0x10d
8a913d90 828f4219 828c099e 00000001 00000000 nt!PspSystemThreadStartup+0x9e
00000000 00000000 00000000 00000000 00000000 nt!KiThreadStartup+0x19
STACK_COMMAND: kb

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: GenuineIntel

IMAGE_NAME: GenuineIntel

DEBUG_FLR_IMAGE_TIMESTAMP: 0

FAILURE_BUCKET_ID: 0x124_GenuineIntel_PROCESSOR_MAE_PRV

BUCKET_ID: 0x124_GenuineIntel_PROCESSOR_MAE_PRV

Followup: MachineOwner
---------
As it is visible, the BIOS is fairly old.

Code:
System Manufacturer BIOSTAR Group
System Model G41 DVI
BIOS Version/Date American Megatrends Inc. 080015, 9/17/2009
Update the BIOS and other drivers like chipset from G41 DVI :: Motherboard :: BIOSTAR (click the "download"section to see the items to download).

The display driver is also old.

Code:
Name AMD Radeon HD 6450
Driver c:\windows\system32\drivers\atikmpag.sys (8.14.1.6210, 238.00 KB (243,712 bytes), 4/20/2011 1:22 AM)
Update your ATI/AMD display driver.
You can get it from the link in our forum, Latest AMD Catalyst Video Driver for Windows 7, or you may go to AMD Graphics Driver and Software and opt for Automatically Detect and Install the appropriate driver for your card.


During installation, you may opt for advanced installation, and install the display driver only, not the Catalyst Control Center.

Is the computer hot? Report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy.

If it is an old build (I am guessing so), dismantle the PC, clean the inside carefully. Clean the air vents and the fan grills, specially. When re-seating, dont forget to add thermal paste to the CPU.

Is the power supply supplying adequate power there? Make it sure.
eXtreme Power Supply Calculator

And, do some hardware check ..... like .....

Test your RAM modules for possible errors.
Ho... Read more

http://www.sevenforums.com/bsod-help-support/285181-bsod-caused-ntoskrnl-exe.html
Relevancy 71.81%

Hi, recently my notebook has frequent BSOD (always when I'm not using it)
Probably it's a bad driver, can someone help me identify it?
Here attached all the files..
Thank you!

A:BSOD caused by ntoskrnl.exe

Code:
Windows 8 Kernel Version 9600 MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 9600.17736.amd64fre.winblue_r9.150322-1500
As it is windows 8, it would be better that you post your issue in BSOD Crashes and Debugging - Windows 8 Forums.

http://www.sevenforums.com/bsod-help-support/368001-bsod-caused-ntoskrnl-exe.html
Relevancy 71.81%

Hi,
I'm facing various BSOD. After I open minidump files via Bluescreenview, it's caused by Ntoskrnl.exe.

Here's the minidump files
Microsoft OneDrive - Access files anywhere. Create docs with free Office Online.

Here's the screenshot of the Bluescreenview :

Please help, Thanks in advance

A:Various BSOD Caused by ntoskrnl.exe

CLIFFFLIP-PC-31_01_2016_131456_04.zip

here's the log generated by DM Log Creator

http://www.tenforums.com/bsod-crashes-debugging/39210-various-bsod-caused-ntoskrnl-exe.html
Relevancy 71.81%

Windows crashed while I was playing Dragon Age Origins. Can someone help me find out which driver or whatever caused this crash?

System info:
Windows 7 Ultimate x64 (retail)
Bought this computer a few weeks ago

Let me know if you guys need any more info.
Thanks a lot!

A:BSOD caused by ntoskrnl.exe

Hi, Luis, and welcome to the forum. Sorry you are having problems. As you noticed, the dump blames ntkrnlmp.exe. It is not likely the real cause as it is a Windows core system driver. More than likely it was affected by something else.





Quote:
Error code A, IRQL_NOT_LESS_OR_EQUAL. Usual causes: Kernel mode driver, System Service, BIOS, Windows, Virus scanner, Backup tool, compatibility.



Code:
Windows 7 Kernel Version 7600 MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Machine Name:
Kernel base = 0xfffff800`02c58000 PsLoadedModuleList = 0xfffff800`02e95e50
Debug session time: Sat Oct 23 11:39:20.144 2010 (GMT-4)
System Uptime: 0 days 1:38:48.316
Loading Kernel Symbols
...............................................................
................................................................
..................
Loading User Symbols
Loading unloaded module list
......
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {fffffa5c07c26c48, 2, 0, fffff80002cce945}

Probably caused by : ntkrnlmp.exe ( nt!SwapContext_PatchXSave+42 )

Followup: MachineOwner
---------

2: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: fffffa5c07c26c48, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff80002cce945, address which referenced memory

Debugging Details:
------------------
READ_ADDRESS: GetPointerFromAddress: unable to read from fffff80002f000e0
fffffa5c07c26c48

CURRENT_IRQL: 2

FAULTING_IP:
nt!SwapContext_PatchXSave+42
fffff800`02cce945 4983be1801000000 cmp qword ptr [r14+118h],0

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

BUGCHECK_STR: 0xA

PROCESS_NAME: svchost.exe

TRAP_FRAME: fffff880046ef640 -- (.trap 0xfffff880046ef640)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000001 rbx=0000000000000000 rcx=fffff88006370e00
rdx=0000000000000000 rsi=0000000000000000 rdi=0000000000000000
rip=fffff80002cce945 rsp=fffff880046ef7d0 rbp=fffff88006370db0
r8=fffff88002f68700 r9=0000000000000000 r10=0000000000000027
r11=fffffa800817b010 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei pl zr na po nc
nt!SwapContext_PatchXSave+0x42:
fffff800`02cce945 4983be1801000000 cmp qword ptr [r14+118h],0 ds:1f80:00000000`00000118=????????????????
Resetting default scope

LAST_CONTROL_TRANSFER: from fffff80002cc7ca9 to fffff80002cc8740

STACK_TEXT:
fffff880`046ef4f8 fffff800`02cc7ca9 : 00000000`0000000a fffffa5c`07c26c48 00000000`00000002 00000000`00000000 : nt!KeBugCheckEx
fffff880`046ef500 fffff800`02c... Read more

http://www.sevenforums.com/bsod-help-support/119898-bsod-caused-ntoskrnl-exe.html
Relevancy 71.81%

Hello I have a problem and I hope you can help Thank you in advance by ntoskrnl.exe BSOD caused I am running AMD Athlon tm Dual-Core Processor GB RAM Asus M N -AM SE motherboard NVIDIA GeForce GT gb I have a pretty disturbing Problem with my Computer for BSOD caused by ntoskrnl.exe some time I am becoming irregularly BSOD I BSOD caused by ntoskrnl.exe was running a windows XP bit OS and I had problems with the sound and with different drivers I became a some BSOD and the cause according to the WDK Windows Debugging Tools minidump check was the driver of my TV-USB Stick then of my wireless-n usb BSOD caused by ntoskrnl.exe stick and at the end ntoskrnl exe At some point I even lost my HDD As I started the computer the HDD couldn't be find I have tested it on another computer and it was found Well I bought a new one for my PC and installed my XP again but I got again the BSODs At the end I thought that my bit XP doesn't work good on my system I got an Windows Professional bit licence through my University I have formatted the HDD and installed the brand new Windows bit OS I was running the computer for a good days I managed to install and prepare everything as it should be latest updates etc And today I got a new BSOD I opened the minidump with the WDK and the cause is ntoskrnl exe What is actually doing this ntoskrnl exe Why am do I still become this BSOD I have tested my memory with memtest and other programs Everything is ok I have also checked my brand new HDD and everything is ok I am going even a little crazy thinking of BIOS Viruses I need the PC for my research at the university and so on I can't lose it Here what I get by opening the minidump with WDK you can find the minidump attached Microsoft R Windows Debugger Version AMD Copyright c Microsoft Corporation All rights reserved Loading Dump File E Mini Dump Win - - dmp Mini Kernel Dump File Only registers and stack trace are available Symbol search path is Invalid Symbol loading may be unreliable without a symbol search path Use symfix to have the debugger choose a symbol path After setting your symbol path use reload to refresh symbol locations Executable search path is Symbols can not be loaded because symbol path is not initialized The Symbol Path can be set by using the NT SYMBOL PATH environment variable using the -y lt symbol path gt argument when starting the debugger using sympath and sympath Unable to load image SystemRoot system ntoskrnl exe Win error n WARNING Unable to verify timestamp for ntoskrnl exe ERROR Module load completed but symbols could not be loaded for ntoskrnl exe Windows Kernel Version MP procs Free x Product WinNt suite TerminalServer SingleUserTS Built by amd fre win gdr - Machine Name Kernel base xfffff c PsLoadedModuleList xfffff a e Debug session time Sat May UTC System Uptime days Symbols can not be loaded because symbol path is not initialized The Symbol Path can be set by using the NT SYMBOL PATH environment variable using the -y lt symbol path gt argument when starting the debugger using sympath and sympath Unable to load image SystemRoot system ntoskrnl exe Win error n WARNING Unable to verify timestamp for ntoskrnl exe ERROR Module load completed but symbols could not be loaded for ntoskrnl exe Loading Kernel Symbols Loading User Symbols Loading unloaded module list Bugcheck Analysis Use analyze -v to get detailed debugging information BugCheck dd fffe fffff cd ca Kernel symbols are WRONG Please fix symbols to do analysis Your debugger is not using the correct symbols In order for this command to work properly your symbol path must point to pdb files that have full type information Certain pdb files such as the public OS symbols do not contain the required information Contact the group that provided you with these symbols if you need this command to work Type referenced nt KTHREAD Your debugger is not using the correct symbols In order for this command to work properly your symbol path must point to pdb files that have full type in... Read more

A:BSOD caused by ntoskrnl.exe

Try the steps at this link NTOSKRNL.EXE is missing or corrupt.
Hope it helps

http://www.sevenforums.com/bsod-help-support/83566-bsod-caused-ntoskrnl-exe.html
Relevancy 71.81%

Hello I would like to find out why I'm getting these blue screens on my new built I started some troubleshooting by disabling and removing some of drivers and memory running memtest for over hours removing my external port USB hub and USB Sound card but still get these BSOD I'm getting these blue screens from ntoskrnl exe mostly win k sys and ksaud sys so far and I have attached all latest after last install BSOD reports here I'm running Vista x bit ultimate retail version and I have installed it times trying to correct the problems I built this PC about months ago using all brand new parts System Hardware Raidmax (mostly) by ntoskrnl.exe caused BSOD case with Thermaltake Toughpower XT W power supply TPX- MPS Pioneer SATA DVR- D DVD CD-ROM drives Gigabyte GA- GA-UD H motherboard AMD Phenom II X Black Edition Deneb GHz G SKILL Ripjaws Series GB x GB -Pin DDR SDRAM DDR PC Sapphire ATI Radeon HD GB video card Western Digital Black TB SATA RPM MB Cache HD Western Digital BSOD caused by ntoskrnl.exe (mostly) Black GB SATA RPM MB Cache HD TP Link USB TL-WN N wireless adapter Creative Labs USB X-Fi Surround external sound card No virus spyware or firewall software other than Microsoft s firewall and defender I would appreciate any help you can give me here and thank you for your time PS not ever overclocking anything

A:BSOD caused by ntoskrnl.exe (mostly)

Hi welcome to the forum.
In view of your possible BSOD problems it would be appropriate for someone from the forum who specialises in these matters.
I would therefore ask you to be patient, and I'm sure someone will attend to you ASAP.
Thank you.

http://www.vistax64.com/crashes-debugging/288770-bsod-caused-ntoskrnl-exe-mostly.html
Relevancy 71.81%

 Hey guys, i need help. Every day i have bsod because this driver. Here are specific information about it.Bug check string-IRQL_NOT_LESS_OR_EQUALBug check code-0x0000000aParameter 1-00000001`00000048Parameter 2-00000000`00000002Parameter 3-00000000`00000001Parameter4-fffff800`0313d01fCaused by driver-ntoskrnl.exeCaused by the adress-ntoskrnl.exe+7fd00

https://social.technet.microsoft.com/Forums/en-US/02d27a6b-8c0b-4998-973d-c1a4c5d275af/bsod-caused-by-ntoskrnlexe?forum=w7itprohardware
Relevancy 71.81%

I built my system about 6 months ago and only recently I have been getting BSOD at random times. I ran memtest which detected no errors. There are some days where I can use my PC all day with no BSOD. The temperatures seem fine as well. I have GPU overclocking software installed, but I have never used them.

EDIT: I was playing an MMO called Blade and Soul at the time of the crashes. I ran sfc /scannow and there were no integrity violations

Please let me know if you need more information.

http://www.sevenforums.com/bsod-help-support/390833-bsod-caused-hal-dll-ntoskrnl-exe.html
Relevancy 71.81%

My 3 year old PC has started to have BSOD continually, and I cant sometimes even start up the computer because it gets a BSOD during start up. I downloaded this program "BlueScreenView" to see what causes the BSODs and in every .dmp file there is "Ntoskrnl.exe" as the cause of BSOD. I reinstalled windows but the bluescreens still come. I attached my .dmp files as instructed.

A:BSOD Caused by Ntoskrnl.exe

Code:
Host Name: ALLU-PC
OS Name: Microsoft Windows 7 Ultimate
OS Version: 6.1.7600 N/A Build 7600
OS Manufacturer: Microsoft Corporation
OS Configuration: Standalone Workstation
OS Build Type: Multiprocessor Free
Registered Owner: Allu
Product ID: 00426-OEM-8992662-00497
Original Install Date: 10.3.2013, 12:18:03
System Boot Time: 19.3.2013, 12:41:46
System Manufacturer: System manufacturer
System Model: System Product Name
System Name ALLU-PC
System Manufacturer System manufacturer
System Model System Product Name
System Type x64-based PC
Where did you get your copy of windows from?

http://www.sevenforums.com/bsod-help-support/282919-bsod-caused-ntoskrnl-exe.html
Relevancy 71.81%

I will attach a example but what can I do delete it?

A:Please Help I get all my BSoD's are caused by ntoskrnl What can I do?

Please see: http://www.sevenforums.com/crashes-d...tructions.html

http://www.sevenforums.com/bsod-help-support/234425-please-help-i-get-all-my-bsods-caused-ntoskrnl-what-can-i-do.html
Relevancy 71.81%

I can not put my computer into sleep or hibernate. If I do, I get a BSOD. I reinstalled and installed the nvidia driver, tested it, and was able to sleep/hibernate. Then I updated and get a BSOD. I'm pretty sure it is a Windows update error. I did google searches and really didn't find anything that matched my problem entirely. Thanks for the help.

A:BSOD caused by ntoskrnl.exe

  
Quote: Originally Posted by deathmetalscott


I can not put my computer into sleep or hibernate. If I do, I get a BSOD. I reinstalled and installed the nvidia driver, tested it, and was able to sleep/hibernate. Then I updated and get a BSOD. I'm pretty sure it is a Windows update error. I did google searches and really didn't find anything that matched my problem entirely. Thanks for the help.


These were caused by your k57nd60a.sys driver. K57ND60A.SYS is related to Broadcom NetLink (TM) Gigabit Ethernet driver. Broadcom.com - Products

Update and re-install


Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\K\Desktop\dump\011511-22776-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff800`00b9c510?
Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols;srv*e:\symbols
*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1.721) MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17105.amd64fre.win7sp1_rc.100929-1730
Machine Name:
Kernel base = 0xfffff800`02a5a000 PsLoadedModuleList = 0xfffff800`02c9de90
Debug session time: Sat Jan 15 02:44:00.710 2011 (GMT-5)
System Uptime: 0 days 2:13:36.630
Loading Kernel Symbols
...............................................................
................................................................
.........................
Loading User Symbols
Loading unloaded module list
.....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa800473fa10, fffff80000b9c528, fffffa80045b8620}

*** WARNING: Unable to verify timestamp for k57nd60a.sys
*** ERROR: Module load completed but symbols could not be loaded for k57nd60a.sys
Probably caused by : k57nd60a.sys

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

DRIVER_POWER_STATE_FAILURE (9f)
A driver is causing an inconsistent power state.
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: fffffa800473fa10, Physical Device Object of the stack
Arg3: fffff80000b9c528, Functional Device Object of the stack
Arg4: fffffa80045b8620, The blocked IRP

Debugging Details:
------------------
DRVPOWERSTATE_SUBCODE: 3

IRP_ADDRESS: fffffa80045b8620

DEVICE_OBJECT: fffffa800527a050

DRIVER_OBJECT: fffffa800525f490

IMAGE_NAME: k57nd60a.sys

DEBUG_FLR_IMAGE_TIMESTAMP: 4c0e2c1d

MODULE_NAME: k57nd60a

FAULTING_MODULE: fffff8800470a000 k57nd60a

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

BUGCHECK_STR: 0x9F

PROCESS_NAME: System

CURRENT_IRQL: 2

LAST_CONTROL_TRANSFER: from fffff80002b49579 to fffff80002adecc0

STACK_TEXT:
fffff800`00b9c4d8 fffff800`02b49579 : 00000000`0000009f 00000000`00000003 fffffa80`0473fa10 fffff800`00b9c528 : nt!KeBugCheckEx
fffff800`00b9c4e0 fffff800`02ad2e95 : fffff800`00b9c5d8 fffff800`00b9c5d8 fffff800`02c4d080 00000000`00000000 : nt! ?? ::FNODOBFM::`string'+0x35110
fff... Read more

http://www.sevenforums.com/bsod-help-support/138555-bsod-caused-ntoskrnl-exe.html
Relevancy 71.81%

This is not the first time I've had a bsod. But this computer is the only computer where i have gotten 'ntoskrnl.exe' as a cause. Which from reading online is i guess some sort of default when no certain cause can be found without being found manually. Which is what i do not know what to do. I really hope someone can help me out here.

when my pc crashed i was waiting in character select of GW2, i was on that screen for about 10 mins or so. this is the first time I have even gotten a bsod during any time of game play, the game did just update upon start up.

the only software i have recently installed is mcafee. my most recent updates would be toshiba qosmio bios update, gw2, and mcafee update.

A:BSOD caused by ntoskrnl.exe.

Please follow the http://www.techsupportforum.com/foru...ta-452654.html to provide us with the full crash reports. .dmps are helpful, but often the other reports can help further by allowing us to give specific troubleshooting steps.



-----

http://www.techsupportforum.com/forums/f299/bsod-caused-by-ntoskrnl-exe-680587.html
Relevancy 71.81%

Hi All,
I upgraded my PC from win8 to win8.1 and i get BSOD very frequently. Tried to solve it by update all drivers, but it doesn't helps.
I ran memory diagnostic before, it show no errors. Please advice.

Attached with my dump files.

Thanks in advance

A:BSOD caused by ntoskrnl.exe and hal.dll, need help!!

Code:
Use !analyze -v to get detailed debugging information.
BugCheck A, {901d503, d, 1, fffff801ed4bd23f}
Probably caused by : hardware ( nt!KeClockInterruptNotify+34f )
Followup: MachineOwner
---------
6: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: 000000000901d503, memory referenced
Arg2: 000000000000000d, IRQL
Arg3: 0000000000000001, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff801ed4bd23f, address which referenced memory
Debugging Details:
------------------

WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff801ed75d138
unable to get nt!MmNonPagedPoolStart
unable to get nt!MmSizeOfNonPagedPoolInBytes
000000000901d503
CURRENT_IRQL: d
FAULTING_IP:
nt!KeClockInterruptNotify+34f
fffff801`ed4bd23f 0000 add byte ptr [rax],al
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
BUGCHECK_STR: AV
PROCESS_NAME: System
ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) amd64fre
TRAP_FRAME: ffffd000b99b8ba0 -- (.trap 0xffffd000b99b8ba0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=000000000901d503 rbx=0000000000000000 rcx=0000000000000015
rdx=0000000000002930 rsi=0000000000000000 rdi=0000000000000000
rip=fffff801ed4bd23f rsp=ffffd000b99b8d30 rbp=01cf63690c220989
r8=0000000000148e25 r9=000000010940ff85 r10=0000000000200000
r11=0000000000000015 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up di pl nz na po nc
nt!KeClockInterruptNotify+0x34f:
fffff801`ed4bd23f 0000 add byte ptr [rax],al ds:00000000`0901d503=??
Resetting default scope
MISALIGNED_IP:
nt!KeClockInterruptNotify+34f
fffff801`ed4bd23f 0000 add byte ptr [rax],al
LAST_CONTROL_TRANSFER: from fffff801ed568ae9 to fffff801ed55cfa0
STACK_TEXT:
ffffd000`b99b8a58 fffff801`ed568ae9 : 00000000`0000000a 00000000`0901d503 00000000`0000000d 00000000`00000001 : nt!KeBugCheckEx
ffffd000`b99b8a60 fffff801`ed56733a : 00000000`00000001 00000000`00000000 00000718`143ab000 ffffd000`b99b8ba0 : nt!KiBugCheckDispatch+0x69
ffffd000`b99b8ba0 fffff801`ed4bd23f : 00000000`00000000 00000000`00328c12 00000000`00000001 00000000`00000000 : nt!KiPageFault+0x23a
ffffd000`b99b8d30 fffff801`edb9a67f : fffff801`ed409000 fffff801`ed4f3426 ffffe001`05a017b0 fffff801`ed409000 : nt!KeClockInterruptNotify+0x34f
ffffd000`b99b8f40 fffff801`ed4d8363 : ffffe001`05a01700 fffff801`ed51073b ffff1ce7`0acb1412 00000000`00000000 : hal!HalpTimerClockInterrupt+0x4f
ffffd000`b99b8f70 fffff801`ed55e42a : ffffe001`05a01700 ffffe001`0c19a880 00000000`00000000 ffffe001`0588a900 : nt!KiCallInterruptServiceRoutine+0xa3
ffffd000`b99b8fb0 fffff801`ed55e80f : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiInterruptSubDispatchNoLockNoEtw+0xea
ffffd000`b99aaad0 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiInterruptDispatchLBControl+0x11f

STACK_COMMAND: kb
FOLLOWUP_IP:
nt!KeClockInterruptNotify+34f
fffff801`ed4bd23f 0000 add byte ptr [rax],al
SYMBOL_STACK_INDEX: 3
SYMBOL_NAME: nt!KeClockInterruptNotify+34f
FOLLOWUP_NAME: Machin... Read more

http://www.eightforums.com/bsod-crashes-debugging/45408-bsod-caused-ntoskrnl-exe-hal-dll-need-help.html
Relevancy 71.81%

Hi guys I just got a BSOD from what looks like ntoskrnl.exe. I have been taking computer repair classes at my high-school because I love fixing computer but I have never seen this before and after some time spent researching I was wondering if this is a serious problem with my laptop. My laptop specs are; My computer is still less then a one years old.
Model:HP Pavilion dv6
OS: Windows 7 Home Premium x64
Ram: 8gb(Came with 6gb but I discharged one of the ram sticks by accident)
Processor:2nd Gen Intel Core i5
If I forgot anything please let me know and ill make sure to include it for this is my first time ever posting a forum. Any help is greatly appreciated and thank you for you time.

A:BSOD caused by ntoskrnl.exe?

NEOFLTR_700_18809.SYS is causing the problem. I couldn't find a reference for it so it may be part of your McAfee AV system. Some AV programs are known to cause a D1 Bug Check code. Someone more familiar with this file may be along shortly.

Image path: \??\C:\Windows\system32\Drivers\NEOFLTR_700_18809.SYS
Image name: NEOFLTR_700_18809.SYS
Timestamp: Fri Jul 08 15:41:22 2011 (4E176B72)
CheckSum: 0001AF64
ImageSize: 0001B000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.

http://www.sevenforums.com/bsod-help-support/228800-bsod-caused-ntoskrnl-exe.html
Relevancy 71.81%

month old HP Probook G laptop running Windows sp blue screening I used Nirsoft's bluescreenview and can see that most of the blue screens have been caused by ntoskrnl exe One ntoskrnl.exe BSOD by caused crash BSOD caused by ntoskrnl.exe was different - after that crash we had to boot from last known good to get the computer going again I did some reading on various websites on ntoskrnl the error message and on BSOD caused by ntoskrnl.exe bug check x f - with mixed results - some point to corrupt or bad drivers and other message points to it either being a memory or hard disk issue This computer is in an office that I only have remote access to I got a staff member to go into F at boot and run diagnostics and there were no errors I will run a disk drive check when there is a staff member present to tell me what is being displayed on the screen I have run memory checks using MemTest - just one pass without errors I have just started it again and will leave it to run for at least half a day as long as the computer does not crash again I have attached a zip file created by the dm log collector in the hope that some one might be able to help me solve this problem faster

A:BSOD caused by ntoskrnl.exe

Hello, chocaholic. I will see if I can help.

You had 4 dump files. This is what they listed. I might add the first 2 were identical with one exception.


Code:

Use !analyze -v to get detailed debugging information.
BugCheck 9F, {3, fffffa800d6e9990, fffff800051293d8, fffffa800b1cd6c0}
*** WARNING: Unable to verify timestamp for btfilter.sys
*** ERROR: Module load completed but symbols could not be loaded for btfilter.sys
Probably caused by : btfilter.sys
that is the Atheros Bluetooth Driver


Code:
fff800`05129878 fffff880`05e34ed0Unable to load image Rt64win7.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for Rt64win7.sys
*** ERROR: Module load completed but symbols could not be loaded for Rt64win7.sys
Rt64win7+0x1aed0
that is the Realtek RTL8168D/8111D Family PCI-E Gigabit Ethernet NIC


Code:
ffff800`05129550 fffff880`05532ff0Unable to load image SYMNETS.SYS, Win32 error 0n2
*** WARNING: Unable to verify timestamp for SYMNETS.SYS
*** ERROR: Module load completed but symbols could not be loaded for SYMNETS.SYS
SYMNETS+0x7bff0
That is the Symantec/ Norton NIS/ N360 Network Security driver


Code:
ffff800`05129528 fffff880`05417a00Unable to load image IDSvia64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for IDSvia64.sys
*** ERROR: Module load completed but symbols could not be loaded for IDSvia64.sys
IDSvia64+0xca00
Which is the Norton Internet Security. That's 2 errors from Norton, both present in 2 dumps. Norton is a well known cause of BSODs. That is from the last dump file, the next one is identical with the addition of


Code:
ffff800`00b9a718 fffff880`0794a88fUnable to load image athrx.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for athrx.sys
*** ERROR: Module load completed but symbols could not be loaded for athrx.sys
athrx+0x14988f
That is the Atheros network adapter driver. The third dump listed


Code:

Use !analyze -v to get detailed debugging information.
BugCheck 1000007E, {ffffffffc0000005, fffff8800624c61e, fffff88003f161e8, fffff88003f15a40}
Probably caused by : atikmdag.sys ( atikmdag+4061e )
Followup: MachineOwner
Which is the graphics driver, and the last dump is


Code:

Use !analyze -v to get detailed debugging information.
BugCheck C5, {8, 2, 0, fffff800031c9b15}
Probably caused by : Pool_Corruption ( nt!ExDeferredFreePool+249 )
Followup: Pool_corruption
Which means basically a driver has corrupted other drivers or system files. If you look at it as a whole, you have Norton internet security and Norton network security mentioned in 2 of the dumps, with maybe one exception the other errors are all network drivers, athrx.sys, Realtek RTL8168D/8111D Family PCI-E Gigabit Ethernet NIC and the Atheros Bluetooth Driver. The other issue is the pool corruption which could be the cause of all of these. It appears that the main problem lies with the Network/LAN drivers. Those, I believe are controlled by Norton network security.

If you would like to know, ntoskrnl.exe is the Windows Kernel and will not cause a BSOD unless it has been tampered with or corrupted by some other process.

I would suggest that you uninstall Norton, if you can and use the Norton removal tool (https://support.norton.com/sp/en/us/...rProfile_en_us)

Also, please open an elevated command prompt ( click start, type cmd in the search box, right click on the cmd entry and select run as administrator) in the black box that opens, copy/paste sfc /scannow. If you decide to type it, notice the space between the sfc and the /. It is a system file checker which will scan your system files and attempt to correct any missing or corrupt files. What we want are the results to say windows found no integrity violations. If it says files were found but could not be repaired, close the box, reboot and run it again, after opening the administrative command prompt. You may have to reboot and run it three times for it to repair all system files. If it can... Read more

http://www.sevenforums.com/bsod-help-support/370083-bsod-caused-ntoskrnl-exe.html
Relevancy 71.81%

I just got a blue screen for the second time this week and I opened blue screen view and it told me the problem is ntoskrnl.exe. How do I fix this? IT usually happens when im on skype but I think it happens when im not too. The attachments have some info. Here is my speccy too http://speccy.piriform.com/results/aZYKZiSk1TEZDG3aZPhKopf

A:BSOD caused by ntoskrnl.exe

Please download MiniToolBox  , save it to your desktop and run it.
 Checkmark the following checkboxes:  List last 10 Event Viewer log  List Installed Programs  List Users, Partitions and Memory size.
 Click Go and paste the content into your next post.
 
Louis

http://www.bleepingcomputer.com/forums/t/539060/bsod-caused-by-ntoskrnlexe/
Relevancy 71.81%

BSODs happening at different intervals. All of them except one have said ntoskrnl.exe was the cause and at the same address. I've checked my memory with memtest for 9+ passes, ran the scannow with no violations, and updated firmware on the SSD that Windows 7 is installed on. The BSODs continue to happen.

Any ideas? Thanks for your time.

A:BSOD caused by ntoskrnl.exe

Follow this -







  
Quote: Originally Posted by writhziden


If you have an SSD, make sure the following are up to date:SSD firmware
BIOS Version
Chipset Drivers
Hard disk controller drivers/SATA drivers
If you have a Marvell IDE ATA/ATAPI device, make sure the drivers are up to date from the Intel site or Marvell site and not from your motherboard/vendor support site.



Reduce items at start up:Performing a Clean Startup in Windows 7

Add, or Remove Startup Programs in Windows 7
Your Antivirus software is basically whats just needed there.

Use the System File Checker tool and Run Disk Check: Repair Windows 7 System Files with System File Checker

Run Disk Check in Windows 7 for Bad Sectors & Errors
Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck F4, {3, fffffa800a109b30, fffffa800a109e10, fffff80003189350}

----- ETW minidump data unavailable-----
Probably caused by : csrss.exe

Followup: MachineOwner
---------

http://www.sevenforums.com/bsod-help-support/299278-bsod-caused-ntoskrnl-exe.html
Relevancy 71.81%

Hello There
Since a while my computer gets Blue Screens this tends to happen only once a day, around 10 minutes after i turn the computer on usually when i play battlefield 3 or View news in Firefox ( Graphic related i think ) so this error happens only once and after i restart, it doesn't happens again

I have tested memory yesterday with a Linux men test but there are no errors
BIOS is set to standard and updated as well
Graphic Drivers are Updated

I have no other ideas what it could be

Here are the dump log files, if something else needs to be provided please let me know

LOGO-PC-22_05_2015_193505,70.zip
Dmp01.jpg

thanks in advance for any suggestions and your time

A:BSOD Caused by ntoskrnl.exe

Hello Logo, welcome to 7F. There's only one dump in your log but it shows a couple of issues. The first one is ESET.
Code:
fffff880`084513e8 fffff880`03706a3eUnable to load image eamonm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for eamonm.sys
*** ERROR: Module load completed but symbols could not be loaded for eamonm.sys
eamonm+0x1ca3e

Code:
fffff880`0844fff8 fffff880`052175d0Unable to load image epfwwfpr.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for epfwwfpr.sys
*** ERROR: Module load completed but symbols could not be loaded for epfwwfpr.sys
epfwwfpr+0x175d0
My recommendation here would be to uninstall ESET using the tool linked below.
Then install MS Security Essentials and MalwareBytes.



   Note
Make sure you uncheck the 'Enable Free Trial' box when installing MalwareBytes.


Your Realtek Ethernet driver is also causing issues. It' very old and needs updating, check here for an updated version.
Code:
fffff880`08450988 fffff880`047392fb
*** WARNING: Unable to verify timestamp for Rt64win7.sys
*** ERROR: Module load completed but symbols could not be loaded for Rt64win7.sys
Rt64win7+0xc2fb

5: kd> lmvm Rt64win7
start end module name
fffff880`0472d000 fffff880`04784000 Rt64win7 T (no symbols)
Loaded symbol image file: Rt64win7.sys
Image path: Rt64win7.sys
Image name: Rt64win7.sys
Timestamp: Thu Mar 04 13:42:52 2010 (4B8FB8DC)
CheckSum: 000611C5
ImageSize: 00057000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

http://www.sevenforums.com/bsod-help-support/370638-bsod-caused-ntoskrnl-exe.html
Relevancy 71.81%
Relevancy 71.81%

Hey guys;

I searched these forums for other posts; and generally people just suggested repairing windows.

When i try an repair my windows 7 (Ultimate 64bit) it tells me it cannot upgrade my system to 32bit, and yes i have been clicking x64 when i choose my system type.

Ill dump the Bluescreen viewer reports here as well as the report/.

Thanks for the help guys.

A:BSOD being caused by ntoskrnl.exe

Welcome to the forum. I am sorry your are having problems.

Both of your dumps blame memory corruption and do not point to any specific cause.






Quote:
Error code A, IRQL_NOT_LESS_OR_EQUAL. Usually causes: Kernel mode driver, System Service, BIOS, Windows, Virus scanner, Backup tool, compatibility

Error code 1E, KMODE_EXCEPTION_NOT_HANDLED . Usual causes: Device driver, hardware, System service, compatibility, Remote control programs, memory, BIOS



Code:
Kernel base = 0xfffff800`02a14000 PsLoadedModuleList = 0xfffff800`02c51e50
Debug session time: Fri Oct 8 17:08:19.452 2010 (GMT-4)
System Uptime: 0 days 4:31:44.294
Loading Kernel Symbols
...............................................................
................................................................
.........................
Loading User Symbols
Loading unloaded module list
........
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {fffffa8050910220, 2, 1, fffff80002aa9b7f}

Probably caused by : memory_corruption ( nt!MiReplenishPageSlist+100 )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: fffffa8050910220, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff80002aa9b7f, address which referenced memory

Debugging Details:
------------------
WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff80002cbc0e0
fffffa8050910220

CURRENT_IRQL: 2

FAULTING_IP:
nt!MiReplenishPageSlist+100
fffff800`02aa9b7f f00fba6b1000 lock bts dword ptr [rbx+10h],0

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

BUGCHECK_STR: 0xA

PROCESS_NAME: rundll32.exe

TRAP_FRAME: fffff88007346010 -- (.trap 0xfffff88007346010)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000001adb00b rbx=0000000000000000 rcx=fdffffffffffffff
rdx=0000000000000050 rsi=0000000000000000 rdi=0000000000000000
rip=fffff80002aa9b7f rsp=fffff880073461a0 rbp=fffffa8005100730
r8=fffff80002cbe400 r9=fffffa8005100000 r10=fffffa8005100750
r11=fffff880073461f8 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei pl nz na po nc
nt!MiReplenishPageSlist+0x100:
fffff800`02aa9b7f f00fba6b1000 lock bts dword ptr [rbx+10h],0 ds:5820:00000000`00000010=????????
Resetting default scope

LAST_CONTROL_TRANSFER: from fffff80002a83ca9 to fffff80002a84740

STACK_TEXT:
fffff880`07345ec8 fffff800`02a83ca9 : 00000000`0000000a fffffa80`50910220 00000000`00000002 00000000`00000001 : nt!KeBugCheckEx
fffff880`07345ed0 fffff800`02a82920 : fffffa80`07b08b00 fffffa80`50910210 fffffa80`07ea5820 00000000`00000000 : nt!KiBugCheckDispatch+... Read more

http://www.sevenforums.com/bsod-help-support/116733-bsod-being-caused-ntoskrnl-exe.html
Relevancy 71.81%

Hi,
bsod often appear in my notebook, and after I find out this was due to the ntoskrnl.exe, I've been browsing for a solution but have not gotten a satisfactory answer. please help solve my problem,
here I attach the minidump file that causes bsod.
Thank you.

A:BSOD caused by ntoskrnl.exe

sorry jcgriff2,
sI recently read a bsod post intructions,
I've already done the steps from 1 to 5,
but step into the 4 ""Run a System Health Report - save in HTML (the default file extension) format: START | type perfmon / report - a viewer will Appear. Save as an HTML file.""can not be saved because the file does not have the words that appear (blank/empty file),
ok, I'll wait for an answer from you, thank you, ...

http://www.techsupportforum.com/forums/f299/bsod-caused-by-ntoskrnl-exe-631529.html
Relevancy 71.81%

Hello all,

I have been recently getting the BSOD while trying to repair my wireless connection. My wireless card keeps going in and out and when I try to use the Windows 7 repair it crashes. I have the 300MBPS Wireless 802.11n PCI Adapter manufactured by Edimax Tech. It is currently disconnected because it was giving me trouble. My RAM and HD are perfectly fine after testing it. I have the SF file and it will be attached. Thank you for your assistance in advance. If there is any more information that I can provide please let me know. Thank you!

-Alan

A:BSOD, Caused by ntoskrnl.exe

Hello darkelite. SPTD is present there in your system and causing some issues.

Code:
fffff800`00b9cbd0 fffff880`010d9cc0Unable to load image sptd.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for sptd.sys
*** ERROR: Module load completed but symbols could not be loaded for sptd.sys
sptd+0x78cc0
Daemon Tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known BSOD causer. Uninstall Alcohol 120% at first. Then download SPTD standalone installer from Disk-Tools.com, and execute the downloaded file as guided below :
Double click to open it.
Click this button only:

If it is grayed out, as in the picture, there is no more SPTD in your system, and you just close the window.
Uninstall AVG. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.
Download, install and update those, and then run full system scans with both of them, one by one.
Some other very important things are not properly loaded, but those may be caused by eithor or both of the aforesaid things. In the presence of those two, all the mishaps may happen. So let us know the situation after omitting those as suggested. Will decide our further steps depending on the further situation.

http://www.sevenforums.com/bsod-help-support/300626-bsod-caused-ntoskrnl-exe.html
Relevancy 71.81%

Hello Lately I have been getting the BSOD a fair bit At first it was about once a couple of weeks then at least BSOD day ntoskrnl.exe by caused a once it started increasing I did a full format of the HDD in an effort to stop it it didn't work It just started occurring more often I've tried updating all of the drivers didn't work I've tried updating my BIOS it didn't work I've done a memory test it showed up as no errors I've tried swapping the HDD's and same problem Today I've just got of them Attached is a copy of the BSOD reports I looked up the CACHE MANAGER error on google and it said it was either a video card driver issue or an anti-virus issue I updated the driver and still got it I've never had a problem with the NOD before so I didn't think it was that I'm hoping it doesn't mean that my video card is about to die I also have another question which could be a stupid one Would having different brands of RAM cause problems like this sticks are the Kingmax Hercules DDR ram the other are GSKILL Ripjaws DDR ram I'm hoping someone can help me find the problem that's causing the crashes Any help would be appreciated I noticed all of these problems started happening when I tried to reset the cmos A lot of other errors have happened since then I can't play a game BSOD at least once a day caused by ntoskrnl.exe because there is an BSOD at least once a day caused by ntoskrnl.exe error in the disc read even though there is no disc in the DVD drive I can't extract anything without corrupt file errors even though I know for a fact that they're not corrupt I can't mount image files I can't burn anything I can't use an internet browser without it crashing repeatedly The internet drops out at random times and sometimes the internet icon on the bottom right of the screen disappears completely and control panel doesn't pick up any connection I can't view anything I put on the desktop without going to the desktop folder It's just getting really frustrating I've got a very basic understanding of computer repairs but this is just way out of my depth

A:BSOD at least once a day caused by ntoskrnl.exe

Sorry, I just realized I had to use the tool posted on this site and add it to a zip file. The attachment has been updated.

http://www.sevenforums.com/bsod-help-support/313856-bsod-least-once-day-caused-ntoskrnl-exe.html
Relevancy 71.81%

I had two BSOD crashes in the last 5 days and I am worried, the screen gave Memory Managment error and looking into the crash I found that it was ntoskrnl.exe that caused it. Please help
Thanks Titanicoso

A:BSOD caused by ntoskrnl.exe

Hi,

Please refer to the following and reply back accordingly with the required information - http://www.techsupportforum.com/foru...ta-452654.html

Regards,

Patrick

http://www.techsupportforum.com/forums/f299/bsod-caused-by-ntoskrnl-exe-868226.html
Relevancy 71.81%

Hello, i really need your help hier. My PC is crashed and frozen randomly ( while watching movies, youtube. surf net ) and I cant do anything but hard reset. Here ist the dump file, hope that you guys can read and tell me how to fix it.
My specs:
AMD Phenom II 1055T 6x2,8ghz
ASUS M4N68T-M LE
ATI Radeon HD5830

Thank you very much!!!

A:Help please, BSOD caused by ntoskrnl.exe

please folow this posting instructions:

http://www.sevenforums.com/crashes-d...tructions.html

i think you shuld update your graphic card drivers...

http://www.sevenforums.com/bsod-help-support/119459-help-please-bsod-caused-ntoskrnl-exe.html
Relevancy 71.81%

Hi Would really appreciate if someone can help This started to happen all of a sudden for over a week When I shutdown or restart the computer it shows quot Shutting down quot and a spinning wheel for a long time I usually ntoskrnl.exe by BSOD caused walk away to do something else When I come back after a while it'll show the login screen After logging in it'll prompt saying that my computer has experienced a crash or something like that Once I stayed through the rebooting process and noticed a flash of BSOD after like minutes of the quot Shutting down quot message being shown Sure enough Blue Screen Viewer shows many BSODs occurred Since then I've tried to restore the system to earlier images that worked for me before None works after a few rounds of Windows updates I've also updated all BSOD caused by ntoskrnl.exe the major drivers on the BSOD caused by ntoskrnl.exe system Again it doesn't work I do have those memory dump files but I'm not sure how to upload one Here is what I got from OSR Online Windows Kernel Version Service Pack MP procs Free x Product WinNt suite TerminalServer SingleUserTS Built by BSOD caused by ntoskrnl.exe amd fre win sp gdr - Machine Name Kernel base xfffff e PsLoadedModuleList xfffff Debug session time Tue Aug UTC - System Uptime days Bugcheck Analysis DRIVER POWER STATE FAILURE f A driver has failed to complete a power IRP within a specific time usually minutes Arguments Arg A device object has been blocking an Irp for too long a time Arg fffffa afe Physical Device Object of the stack Arg fffff e d nt TRIAGE F POWER on Win otherwise the Functional Device Object of the stack Arg fffffa e c The blocked IRP Debugging Details ------------------ Either you specified an unqualified symbol or your debugger doesn't have full symbol information Unqualified symbol resolution is turned off by default Please either specify a fully qualified symbol module symbolname or enable resolution of unqualified symbols by typing quot symopt- quot Note that enabling unqualified symbol resolution with network symbol server shares in the symbol path may cause the debugger to appear to hang for long periods of time when an incorrect symbol name is typed or the network symbol server is down For some commands to work properly your symbol path must point to pdb files that have full type information Certain pdb files such as the public OS symbols do not contain the required information Contact the group that provided you with these symbols if you need this command to work Type referenced NT DEVICE OBJECT Either you specified an unqualified symbol or your debugger doesn't have full symbol information Unqualified symbol resolution is turned off by default Please either specify a fully qualified symbol module symbolname or enable resolution of unqualified symbols by typing quot symopt- quot Note that enabling unqualified symbol resolution with network symbol server shares in the symbol path may cause the debugger to appear to hang for long periods of time when an incorrect symbol name is typed or the network symbol server is down For some commands to work properly your symbol path must point to pdb files that have full type information Certain pdb files such as the public OS symbols do not contain the required information Contact the group that provided you with these symbols if you need this command to work Type referenced nt IRP Either you specified an unqualified symbol or your debugger doesn't have full symbol information Unqualified symbol resolution is turned off by default Please either specify a fully qualified symbol module symbolname or enable resolution of unqualified symbols by typing quot symopt- quot Note that enabling unqualified symbol resolution with network symbol server shares in the symbol path may cause the debugger to appear to hang for long periods of time when an incorrect symbol name is typed or the network symbol server is down For some commands to work properly your symbol path must point to pdb files tha... Read more

https://social.technet.microsoft.com/Forums/en-US/4f64bd70-e681-40ad-8e1a-4e8fdea0ce8f/bsod-caused-by-ntoskrnlexe?forum=w7itprogeneral
Relevancy 71.81%

Hi folks - having some trouble troubleshooting a BSOD on a Lenovo Yoga 13.

BSOD screen had dpc_watchdog_violation listed, but when running the minidump through Windbg I got to this:


Code:
Probably caused by : ntoskrnl.exe ( nt+14dca0 )


Wasn't quite sure where to go from here seeing as that ntoskrnl seems to be a core part of the OS. Have attached the package from SF Diagnostic Tool in the hopes that someone can help!

Thanks - any help/tips appreciated.

A:BSOD probably caused by ntoskrnl.exe

Uninstall Hamachi. Enjoy.

http://www.eightforums.com/bsod-crashes-debugging/41327-bsod-probably-caused-ntoskrnl-exe.html
Relevancy 71.81%

I was running the Steam product Vindictus, which i have had no problems with in the past, when i recieved a BSOD. Checking the dump file, i saw the cause was ntoskrnl.exe. Over the next 4 hours, my computer restarted itself while i attempted to rectify the issue, with no BSOD. I have now updated every driver on my rig, and still receive the same restart, at various intervals when playing Vindictus.I have since ceased to play, and have ran a chkdisk, registry cleanup and full virus scan/virus update with no fix.

A:BSOD caused by ntoskrnl.exe

A "stop 0x124" is fundamentally different to many other types of bluescreens because it stems from a hardware complaint. Stop 0x124 minidumps contain very little practical information, and it is therefore necessary to approach the problem as a case of hardware in an unknown state of distress. You can read more on this error and what to try here... Stop 0x124 - what it means and what to try: Stop 124 - What it means and what to try


Code:
Microsoft (R) Windows Debugger Version 6.2.9200.20512 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\USER\Downloads\SF_18-12-2013\121813-48204-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.18247.amd64fre.win7sp1_gdr.130828-1532
Machine Name:
Kernel base = 0xfffff800`03417000 PsLoadedModuleList = 0xfffff800`0365a6d0
Debug session time: Thu Dec 19 07:58:25.515 2013 (UTC + 6:00)
System Uptime: 0 days 0:00:11.639
Loading Kernel Symbols
.....................................................
Loading User Symbols
Mini Kernel Dump does not contain unloaded driver list
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 124, {0, fffffa800e66a038, 0, 0}

Probably caused by : AuthenticAMD

Followup: MachineOwner
---------

1: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa800e66a038, Address of the WHEA_ERROR_RECORD structure.
Arg3: 0000000000000000, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000000000000, Low order 32-bits of the MCi_STATUS value.

Debugging Details:
------------------
BUGCHECK_STR: 0x124_AuthenticAMD

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

PROCESS_NAME: System

CURRENT_IRQL: 0

STACK_TEXT:
fffff880`0335b5b0 fffff800`036d7ca9 : fffffa80`0e66a010 fffffa80`0c85b040 fffff8a0`0000000d 00000000`00000000 : nt!WheapCreateLiveTriageDump+0x6c
fffff880`0335bad0 fffff800`035b8ea7 : fffffa80`0e66a010 fffff800`036322d8 fffffa80`0c85b040 00000000`00000000 : nt!WheapCreateTriageDumpFromPreviousSession+0x49
fffff880`0335bb00 fffff800`03520275 : fffff800`03693b40 00000000`00000001 fffffa80`0e564e60 fffffa80`0c85b040 : nt!WheapProcessWorkQueueItem+0x57
fffff880`0335bb40 fffff800`03496261 : fffff880`010b6e00 fffff800`03520250 fffffa80`0c85b000 00000000`0000055a : nt!WheapWorkQueueWorkerRoutine+0x25
fffff880`0335bb70 fffff800`037292ea : 00000000`00000000 fffffa80`0c85b040 00000000`00000080 fffffa80`0c6e9990 : nt!ExpWorkerThread+0x111
fffff880`0335bc00 fffff800`0347d8e6 : fffff880`0316d180 fffffa80`0c85b040 fffff880`031780c0 00000000`00000000 : nt!PspSystemThreadStartup+0x5a
fffff880`0335bc40 00000000`00000000 : fffff880`0335c000 fffff880`03356000 ... Read more

http://www.sevenforums.com/bsod-help-support/315655-bsod-caused-ntoskrnl-exe.html
Relevancy 71.81%

Hey guys, as the title says I've been getting BSOD about everyday now. I've tried troubleshooting on my own, but that hasn't worked. BCCode associated with them is either d1 or 9f (not sure if this helps).

I've attached the SF log.

I've run memtest86+ and haven't gotten a failure yet. I keep my laptop virus free. I believe my drivers are up to date.

Setup:
-HP dv6t-3100
-intel i5
-575 HDD
-6 RAM
-ATI Mobility Radeon HD 5470 & Intel HD Graphics

Any help would be great. I will be going to sleep soon (go to work early) but I will be on all day tomorrow.

Thanks!

A:BSOD caused by ntoskrnl.exe

Please uninstall the following software with Revo Uninstaller:

Code:
Start Menu\Programs\Ad-Aware Antivirus
Start Menu\Programs\Auslogics\Disk Defrag
Start Menu\Programs\Glary Utilities 3



   Note
Download and install Revo Uninstaller free from here: Download Revo Uninstaller FreewareOpt for "Advanced Mode" and uninstall the software (also delete the leftover registry entries).

Norton antivirus is a frequent cause of BSOD's. Uninstall all and any other antivirus software from your system. Please only keep Microsoft Security Essentials & the Free version of Malwarebytes, update and make full scans separately:Uninstallers (removal tools) for common antivirus software - ESET Knowledgebase

Help protect your PC with Microsoft Security Essentials

Malwarebytes Free Do not start the trial version of MalwareBytes

You may also take a look at:Good & Free System Security CombinationReduce items at start up:Performing a Clean Startup in Windows 7

Add, or Remove Startup Programs in Windows 7
Antivirus software is basically whats just needed there.

Use the System File Checker tool and Run Disk Check: Repair Windows 7 System Files with System File Checker

Run Disk Check in Windows 7 for Bad Sectors & ErrorsMonitor hardware temperature with system monitoring software like Speccy or HWMonitor:
Piriform - Speccy

CPUID - HWMonitorUpload a screenshot using:CrystalDiskInfo For how to upload a screenshot or file, read here

Test your Hard Drive by running:Hard Drive Diagnostic ProcedureInstall all updates including Service Pack 1 to your system.Learn how to install Windows 7 Service Pack 1 (SP1)Bugcheck:

Code:
Microsoft (R) Windows Debugger Version 6.2.9200.20512 X86
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\USER\Downloads\slicksax\SF_06-08-2013\080613-71713-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7600.17273.amd64fre.win7_gdr.130318-1532
Machine Name:
Kernel base = 0xfffff800`03406000 PsLoadedModuleList = 0xfffff800`03642e70
Debug session time: Wed Aug 7 04:52:35.921 2013 (UTC + 6:00)
System Uptime: 0 days 0:07:27.139
Loading Kernel Symbols
...............................................................
................................................................
.......................................
Loading User Symbols
Loading unloaded module list
......
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 50, {fffff80003c36082, 0, fffff8800a368d83, 2}

*** WARNING: Unable to verify timestamp for SRTSPL64.SYS
*** ERROR: Module load completed but symbols could not be loaded for SRTSPL64.SYS

Could not read faulting driver name
Probably caused by : SRTSPL64.SYS ( SRTSPL64+27d83 )

Followup: MachineOwner
---------

2: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced... Read more

http://www.sevenforums.com/bsod-help-support/300183-bsod-caused-ntoskrnl-exe.html
Relevancy 71.81%

HI

I bough this Acer V3-571G-9435 laptop on Aug 20, 2012 and replaced the original HDD with OCZ vertex 3 240GB SSD before I star it up. I installed Win7 Home Premium 64 bit version.

Here is the hardware information of the laptop:
CPU: intel i7-3610QM
Memory: Kingston DDR3-1333 2GB & A-Data DDR3-1333 4GB
Graphic card: nVidia GT640M
SDD: OCZ vertex 3 240GB
HDD: Seagate ST9500325AS 500GB 5400 RPM 8MB Cache 2.5" SATA

I have experienced BSOD three times caused by DRIVER_POWER_STATE_FAILURE related with ntoskrnl.exe.

The first BSOD on Aug 24 was probably related with a heavy CPU usage of a crsytallographic computation. I realized one of the eight threads was 100% used for a couple minutes before the crash.

I replaced optical drive with the original HDD on Aug 25 and updated the bios.
Two BSOD happened today and I wonder if they are related with drivers and how to fix them.

Thank you.

Luke

A:BSOD caused by ntoskrnl.exe

Welcome
Go to the Nvidia website and update driver
nvlddmkm.sys

http://www.sevenforums.com/bsod-help-support/249386-bsod-caused-ntoskrnl-exe.html
Relevancy 70.95%

I keep getting BSODs when I play games for a short while At first I thought when BSOD says ntoskrnl.exe games. BSOD BlueScreenView caused playing it was a bad installation of Windows BSOD when playing games. BlueScreenView says ntoskrnl.exe caused BSOD so I did a clean format full of my SSD and a clean install of Windows Ultimate x Installation failed quite a few times before finally succeeding Tried another copy of Windows same install failures I finally finished reinstalling Windows on my PC I suspected the RAM to be at fault so I ran MemTest and found a ton of errors Upon closer inspection of the BIOS settings I found that my board was clocking my ram in Auto mode at mhz instead of the factory mhz Corsair Vengeance LP DDR CAS on Asus Sabertooth Z I updated my BIOS to the latest as of this posting and I still have to manually set the memory frequencies for it to run at mhz Everything seemed fine for a few hours running prime I supposed my PC was fine now after that clean install of Windows but a few minutes into playing Battlefield I BSOD I am no pro at reading dump files and I was hoping someone could help me isolate the sources of my BSODs I've attached the minidump files for each BSOD below Thanks

A:BSOD when playing games. BlueScreenView says ntoskrnl.exe caused BSOD

My system specs are:

Intel Core i7-3770
Asus Sabertooth Z77
Corsair Vengeance Low Profile DDR3 @1600mhz CAS9
Kingston HyperX 3k 120GB SSD (boot, Battlefield 3, Microsoft Office)
Asus DirectCUII GTX 670
Thermaltake Toughpower 1200 watt
Razer Blackwidow Ultimate
Cyborg RAT7 Mouse

http://www.sevenforums.com/bsod-help-support/240280-bsod-when-playing-games-bluescreenview-says-ntoskrnl-exe-caused-bsod.html
Relevancy 70.95%

Hello, I have installed Windows 7 Home premium x64 on a system I built myself, and keep getting regular bluescreens. When I looked at the dumps with Bluescreenview, it always has ntoskrnl.exe highlighted in red. Help please?

A:Regular BSOD's, caused by ntoskrnl.exe?

Memory corruption is indicated in the dump files
Test your RAM
RAM - Test with Memtest86+

http://www.sevenforums.com/bsod-help-support/139868-regular-bsods-caused-ntoskrnl-exe.html
Relevancy 70.95%

Hello a month or so ago just couple of months after I bought a new PC pretty decent expensive for my country I started to experience a lot of BSODs multiple by ntoskrnl.exe caused BSOD only at the time I started any game or any video file Sometimes I could play for - hours or watch a video multiple BSOD caused by ntoskrnl.exe sometimes it crashes - minutes after I start a game It works fine while I keep browsing internet in Mozilla though First I thought my main drive - SSD crashed - we unplugged it and tried multiple BSOD caused by ntoskrnl.exe to work on my older HDDs which I kept from my old PC Same problem We multiple BSOD caused by ntoskrnl.exe re-installed Windows multiple times it kept showing the problem Usually it does not start right after some new action was taken - like If I change HDD and install a new windows here a day two maybe it works ok with no BSODs at all BlueScreenView shows mostly always cant recon a different result a problem with ntoskrnl exe Once I thought my memory was an issue but - circles of Memtest didn't show any problems at all I run the latest drivers for my graphics card nvidia geforce gtx ti and I don't know wheter my video card can cause the problem What I know is thats its definetely not the HDD or probably my memory so I can only think about motherboard or graphics card problems And to be clear at first my PC just got stuck in games and I had to reboot it sometimes graphics in games crashed like flashing or everything was very smooth blur sorry for my english and a week or two after it started to give me BSOD all the time in games videos I used Win driver verifier and as expected everything was clear I'm not good at technical side of the issue but getting a little bit desperate to find a solution I decided to ask for help from the pro's here are my dumps of BlueScreenView Dump File - - dmp Crash Time Bug Check String IRQL NOT LESS OR EQUAL Bug Check Code x a Parameter Parameter Parameter Parameter fffff ece Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe c File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win gdr - Processor x Crash Address ntoskrnl exe c Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time Bug Check String IRQL NOT LESS OR EQUAL Bug Check Code x a Parameter Parameter Parameter Parameter fffff ece Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe c File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win gdr - Processor x Crash Address ntoskrnl exe c Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time Bug Check String PFN LIST CORRUPT Bug Check Code x e Parameter Parameter eb ae Parameter Parameter Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe c File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win gdr - Processor x Crash Address ntoskrnl exe c Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time Bug Check String IRQL NOT LESS OR EQUAL Bug Check Code x a Parameter Parameter Parameter Parameter fffff abece Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe c File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win gdr - Processor x Crash Address ntoskrnl exe c Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time B... Read more

A:multiple BSOD caused by ntoskrnl.exe

Minidumps have been created they are referenced in your copy/paste logs there.
Could you follow these.

http://www.sevenforums.com/crashes-d...tructions.html

http://www.sevenforums.com/bsod-help-support/181184-multiple-bsod-caused-ntoskrnl-exe.html
Relevancy 70.95%

Hello this is my first time posting in a forum such as this so please forgive me for any fault in etiquette My issue is that my laptop has been continuously crashing with BSOD errors ntoskrnl.exe, BSOD's by Multiple help! caused for seemingly no reason My original configuration was in windows and started experiencing repeated crashes after I received the laptop back from repairs Keep in mind it is only year old Multiple BSOD's caused by ntoskrnl.exe, help! though now out of warranty I wiped the OS and installed a fresh copy of Windows Ultimate ive been meaning to do this for a while and the errors were Multiple BSOD's caused by ntoskrnl.exe, help! all the encouragement i needed Despite installing all windows updates lenovo updates and checking all drivers these BSOD errors continue to occur I cant even begin to narrow down on the issue as i feel like ive experienced every error type there is The list is currently at UNEXPECTED KERNAL MODE TRAP PAGE FAULT IN NONPAGED AREA IRQL NOT LESS OR EQUAL DRIVER IRQL NOT LESS OR EQUAL SYSTEM THREAD EXCEPTION NOT HANDLED SYSTEM PTE MISUSE KMODE EXCEPTION NOT HANDLED i have included the dump information from bluescreenview and CPU-Z computer information for reference Please let me know if there is anything else i need to Multiple BSOD's caused by ntoskrnl.exe, help! provide Thank you for any help I am in dire need of assistance as i have an honors thesis to complete in a few weeks and my only other computer is a mac with a corrupted battery

A:Multiple BSOD's caused by ntoskrnl.exe, help!

Additional information is required.

1. Download the DM Log Collector application to your desktop by clicking the link below

DM Log Collector.exe

2. Run it by double-clicking the icon on your desktop, and follow the prompts.
3. Locate the .ZIP file that is created on your desktop, and upload it here in your next reply.

http://www.sevenforums.com/bsod-help-support/348459-multiple-bsods-caused-ntoskrnl-exe-help.html
Relevancy 70.95%

Goodevening people I have been getting a lot of bluescreens the last week Only today i've had - Three IRQL NOT LESS OR EQUAL screens two caused BSOD All ntoskrnl.exe kinds of by caused by ntoskrnl exe the last one caused by avast - All kinds of BSOD caused by ntoskrnl.exe Two SYSTEM SERVICE EXCEPTION screens all caused by All kinds of BSOD caused by ntoskrnl.exe ntoskrnl exe - One ATTEMPTED EXECUTE OF NOEXECUTE MEMORY screen also caused by ntoskrnl exe - One IRQL GT ZERO AT SYSTEM SERVICE All kinds of BSOD caused by ntoskrnl.exe screen also cause by ntoskrnl exe I'm using Windows Enterprise SP The latest dmp file contained the following Code Microsoft R Windows Debugger Version AMD Copyright c Microsoft Corporation All rights reserved Loading Dump File C Users Maarten Desktop - - dmp Mini Kernel Dump File Only registers and stack trace are available Symbol search path is Invalid Symbol loading may be unreliable without a symbol search path Use symfix to have the debugger choose a symbol path After setting your symbol path use reload to refresh symbol locations Executable search path is Symbols can not be loaded because symbol path is not initialized The Symbol Path can be set by using the NT SYMBOL PATH environment variable using the -y lt symbol path gt argument when starting the debugger using sympath and sympath Unable to load image SystemRoot system ntoskrnl exe Win error n ERROR Module load completed but symbols could not be loaded for ntoskrnl exe Windows Kernel Version Service Pack MP procs Free x Product WinNt suite TerminalServer SingleUserTS Built by amd fre win sp gdr - Machine Name Kernel base xfffff a a PsLoadedModuleList xfffff c f Debug session time Fri May UTC System Uptime days Symbols can not be loaded because symbol path is not initialized The Symbol Path can be set by using the NT SYMBOL PATH environment variable using the -y lt symbol path gt argument when starting the debugger using sympath and sympath Unable to load image SystemRoot system ntoskrnl exe Win error n ERROR Module load completed but symbols could not be loaded for ntoskrnl exe Loading Kernel Symbols Loading User Symbols Loading unloaded module list Symbol Loading Error Summary Module name Error ntoskrnl The system cannot find the file specified You can troubleshoot most symbol related issues by turning on symbol loading diagnostics sym noisy and repeating the command that caused symbols to be loaded You should also verify that your symbol search path sympath is correct Bugcheck Analysis Use analyze -v to get detailed debugging information BugCheck B c fffff ab fffff b fa WARNING Unable to verify timestamp for mssmbios sys ERROR Module load completed but symbols could not be loaded for mssmbios sys Kernel symbols are WRONG Please fix symbols to do analysis Either you specified an unqualified symbol or your debugger doesn't have full symbol information Unqualified symbol resolution is turned off by default Please either specify a fully qualified symbol module symbolname or enable resolution of unqualified symbols by typing quot symopt- quot Note that enabling unqualified symbol resolution with network symbol server shares in the symbol path may cause the debugger to appear to hang for long periods of time when an incorrect symbol name is typed or the network symbol server is down For some commands to work properly your symbol path must point to pdb files that have full type information Certain pdb files such as the public OS symbols do not contain the required information Contact the group that provided you with these symbols if you need this command to work Type referenced nt KPRCB Either you specified an unqualified symbol or your debugger doesn't have full symbol information Unqualified symbol resolution is turned off by default Please either specify a fully qualified symbol module symbolname or enable resolution of unqualified symbols by typing quot symopt- quot Note that enabling unqualified symbol resolution with network symbol server sh... Read more

A:All kinds of BSOD caused by ntoskrnl.exe

Various different BSODs are there, within a short time span. Which indicates to some sort of memory issue.

Test your RAM modules for possible errors. How to Test and Diagnose RAM Issues with Memtest86+
Run memtest86+ for at least 8 consecutive passes.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Let us know the result. We have to do some further things depending on it.

http://www.sevenforums.com/bsod-help-support/369349-all-kinds-bsod-caused-ntoskrnl-exe.html
Relevancy 70.95%

I have attached the required files including dumps and the SF diagnostics thing.
There's not much to say on this one. Its got to be either RAM or Graphics Card in my mind. This has only happened when these two components have been in.
I'll let you vets work your magic.
Thanks in advance!

A:BSOD Various bug checks all caused by ntoskrnl.exe

Most of your crash dumps are kinda silent but the last one. From it we can see that the graphics driver is failing here.

Code:
fffff880`0d8d90e8 fffff880`111c0dc8Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
nvlddmkm+0x1b0dc8
And the driver is not the latest one.

Code:
fffff880`11010000 fffff880`11d04000 nvlddmkm T (no symbols)
Loaded symbol image file: nvlddmkm.sys
Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
Image name: nvlddmkm.sys
Timestamp: Tue Oct 02 23:51:13 2012 (506B3099)
CheckSum: 00CD4613
ImageSize: 00CF4000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Apply the latest version of nVidia display driver.
You may download it directly, from our forum link Latest NVIDIA ForceWare Video Drivers Windows 7; or you may opt for the Option 2 of Drivers- Download NVIDIA Drivers for ?Automatically find drivers for my NVIDIA products? (it requires java installed).

Also there is some notable amount of Ntfs.sys errors.

Code:
fffff880`0d8d9978 fffff880`01235000 Ntfs!NtfsGetNextChildLcb <PERF> (Ntfs+0x0)
fffff880`0d8d9980 fffff880`01280ddc Ntfs!rcon+0x6bc
fffff880`0d8d9988 fffff880`0d8d9ee0
fffff880`0d8d9990 00001f80`00000000
fffff880`0d8d9998 fffff880`01290010 Ntfs!NtfsRollbackStructLookasideList+0x10
fffff880`0d8d99a0 00010282`0018b000
fffff880`0d8d99a8 fffff880`0d8d5000
fffff880`0d8d99b0 00000000`00000000
fffff880`0d8d99b8 fffff880`01242a14 Ntfs!NtfsCleanupIrpContext+0x164
fffff880`0d8d99c0 fffff880`0124c463 Ntfs!NtfsFsdWrite+0x1c3
fffff880`0d8d99c8 fffff880`01235000 Ntfs!NtfsGetNextChildLcb <PERF> (Ntfs+0x0)
fffff880`0d8d99d0 fffff880`0129ba8c Ntfs!__PchSym_ <PERF> (Ntfs+0x66a8c)
It may be caused by various reasons. So you may want to do the following.
Seatool for dos: SeaTools | Seagate download. Burn it in a blank cd. boot from the CD, click on "Accept", wait for it to finish detecting the drives, then in the upper left corner select "Basic Tests", then select "Long Test" and let it run.
Use Microsoft Security Essentials as your only antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner. Download, install and update those, and then run full system scans with both of them, one by one.
Update the Asmedia Sata Driver ..... it is very old, goes back to Nov 2011.
Let us know the results.

http://www.sevenforums.com/bsod-help-support/284569-bsod-various-bug-checks-all-caused-ntoskrnl-exe.html
Relevancy 70.95%

Having seen other help from this forum I thought I'd post my problem and see if you guys could help me out.

I just built my girlfriend's PC a few days ago, all was well but now a BSOD appears randomly, so after using BlueScreenView on the dump files it all originates from one driver.

The PC in questions specs are almost identical to my own (minus the 1TB HDD and her MOBO is the Rev 3.1 version of the same MOBO).

I've attached a copy of the dump files to this post if that helps anyone.
I've already tried chkdsk which gave no errors.

Thanks in advance

A:BSOD Caused by Driver ntoskrnl.exe

Sorry to hear about the BSODs. Please follow the instructions below:

http://www.sevenforums.com/crashes-d...tructions.html

http://www.sevenforums.com/bsod-help-support/206700-bsod-caused-driver-ntoskrnl-exe.html
Relevancy 70.95%

Another one of these. I have checked through the forums and can't find a solution. Usually I'm fine with BSOD and can solve but this has stumped me a bit.

Could someone a little more experienced take a look and see what could possibly be the problem?

I've attached Perfmon report and Minidumps.

Many Thanks
Nat

A:BSOD IRQL_NOT_LESS_OR_EQUAL caused by ntoskrnl.exe

Welcome to TSF,

ssp.exe is more than likely the faulting application i believe its apart of SpyStopper Pro?
Either make sure its up-to-date or remove it for testing purposes.
But i also noticed that the module thats required for the SpyStopper to function was unloaded at the time of the crash.

Code:
GetPointerFromAddress: unable to read from fffff800030f7000
THREAD fffffa800acaf700 Cid 0aec.07d4 Teb: 000000007efa4000 Win32Thread: 0000000000000000 WAIT: (WrQueue) UserMode Alertable
fffffa800bc37300 NotificationEvent
Not impersonating
GetUlongFromAddress: unable to read from fffff80003036ba4
Owning Process fffffa800bc3d5c0 Image: ssp.exe
Attached Process N/A Image: N/A
fffff78000000000: Unable to get shared data
Wait Start TickCount 290757
Context Switch Count 689 IdealProcessor: 0
ReadMemory error: Cannot get nt!KeMaximumIncrement value.
UserTime 00:00:00.000
KernelTime 00:00:00.000
Win32 Start Address 0x0000000077e13e85
Stack Init fffff88007bf5c70 Current fffff88007bf5680
Base fffff88007bf6000 Limit fffff88007bf0000 Call 0
Priority 10 BasePriority 8 UnusualBoost 0 ForegroundBoost 2 IoPriority 2 PagePriority 5
Child-SP RetAddr : Args to Child : Call Site
fffff880`07bf56c0 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 ffffd800`0303e410 : 0x0

Code:
Unloaded modules:
fffff880`07749000 fffff880`077ba000 spsys.sys
fffff880`0627e000 fffff880`062f2000 IntcDAud.sys
fffff880`01680000 fffff880`0168e000 crashdmp.sys
fffff880`0168e000 fffff880`01698000 dump_storpor
fffff880`04056000 fffff880`04319000 dump_iaStorA
fffff880`04319000 fffff880`0432c000 dump_dumpfve

http://www.techsupportforum.com/forums/f299/bsod-irql_not_less_or_equal-caused-by-ntoskrnl-exe-1120649.html
Relevancy 70.95%

hello, i've recently bought a new computer but finding it frustrating that i keep getting the bsod randomly as i use my computer. using blue screenview, its saying that the bsod was caused by ntoskrnl.exe and Ntfs.sys. i am in desperate need of help and would be very grateful for any solutions bought forward.

A:bsod caused by ntoskrnl.exe and Ntfs.sys

Welcome

Dumps indicate memory issue

Run memtest86+ on each stick for 8 passes preferably overnight RAM - Test with Memtest86+

Post back results

Analyze

STOP 0x0000001A: MEMORY_MANAGEMENT :: Usual causes: Device driver, memory, kernel :: BSOD Index


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 50, {fffff7000d838588, 0, fffff80002ca170c, 2}
Could not read faulting driver name
Probably caused by : memory_corruption ( nt!MiUpdateWsle+35c )

Followup: MachineOwner
---------
STOP 0x00000024: NTFS_FILE_SYSTEM Usual causes: Disk corruption, insufficient physical memory, Device driver, Indexing, Resident antivirus, backup, defrag programs, Disk/Drive failing/failure BSOD Index


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 24, {c08a5, 0, 0, 0}

Probably caused by : Ntfs.sys ( Ntfs!NtfsPagingFileIo+155 )

Followup: MachineOwner
---------

1: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

NTFS_FILE_SYSTEM (24)
If you see NtfsExceptionFilter on the stack then the 2nd and 3rd
parameters are the exception record and context record. Do a .cxr
on the 3rd parameter and then kb to obtain a more informative stack
trace.
To make sure that hard drive is good run disk check following this tutorial Disk Check then Hard drive scan usings SeaTools SeaTools | Seagate both long and short tests.

Let us know how it goes

http://www.sevenforums.com/bsod-help-support/252080-bsod-caused-ntoskrnl-exe-ntfs-sys.html
Relevancy 70.95%

Hello guys. For some reason I get these random BSODs on this computer. I viewed dmp files in BluescreenView and it showed me that ntoskrnl.exe is causing the crash.
I have reinstalled windows already (win7x64 ultimate), same thing happens randomly.

First attachment is dmp files
Second is the report

Asus p7p55d
i7
8gb ram ocz
1tb hd
pny nvidia quatro 1800
dlink n150 wireless pci adapter
Could you please look at them and tell me which path should I go about fixing this?
Thank you.

A:Random BSOD caused by ntoskrnl.exe

Seems like a hardware problem, test your RAM
RAM - Test with Memtest86+

Update the Nvidia drivers
Drivers - Download NVIDIA Drivers


   Information
If your still get BSODs run Driver Verifier and upload any dumps which are then created
Driver Verifier - Enable and Disable

Note: Your computer may not be functional in Normal Mode if faulting drivers are detected during this phase, you may need to use Safemode with Networking.


Code:
nvlddmkm.sys fffff880`04886000 fffff880`0534e100 0x00ac8100 0x4aebce68 31/10/2009 09:43:04

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff80002acc8b0, Address of the exception record for the exception that caused the bugcheck
Arg3: fffff8800aa32f90, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.

Debugging Details:
------------------
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

FAULTING_IP:
nt!MiCaptureProtectionFromProto+1c
fffff800`02acc8b0 488b01 mov rax,qword ptr [rcx]

CONTEXT: fffff8800aa32f90 -- (.cxr 0xfffff8800aa32f90)
rax=0000000000000011 rbx=0000000000000000 rcx=0000000000000000
rdx=fffff8800aa33ac8 rsi=fffffa8009b5e5a8 rdi=fffffa800978a660
rip=fffff80002acc8b0 rsp=fffff8800aa33970 rbp=0000000000000001
r8=000000000de56000 r9=fffffa8009b5e210 r10=0000000000000000
r11=0000000000000030 r12=0000000000000011 r13=fffff6800006f2a8
r14=fffff8800aa33ac0 r15=000000000de55000
iopl=0 nv up ei ng nz na pe nc
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010282
nt!MiCaptureProtectionFromProto+0x1c:
fffff800`02acc8b0 488b01 mov rax,qword ptr [rcx] ds:002b:00000000`00000000=????????????????
Resetting default scope

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

BUGCHECK_STR: 0x3B

PROCESS_NAME: firefox.exe

CURRENT_IRQL: 0

LAST_CONTROL_TRANSFER: from 0000000000000000 to fffff80002acc8b0

STACK_TEXT:
fffff880`0aa33970 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!MiCaptureProtectionFromProto+0x1c
FOLLOWUP_IP:
nt!MiCaptureProtectionFromProto+1c
fffff800`02acc8b0 488b01 mov rax,qword ptr [rcx]

SYMBOL_STACK_INDEX: 0

SYMBOL_NAME: nt!MiCaptureProtectionFromProto+1c

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: nt

DEBUG_FLR_IMAGE_TIMESTAMP: 4a5bc600

STACK_COMMAND: .cxr 0xfffff8800aa32f90 ; kb

IMAGE_NAME: memory_corruption

FAILURE_BUCKET_ID: X64_0x3B_nt!MiCaptureProtectionFromProto+1c

BUCKET_ID: X64_0x3B_nt!MiCaptureProtectionFromProto+1c

Followup: MachineOwner
---------

http://www.sevenforums.com/bsod-help-support/192314-random-bsod-caused-ntoskrnl-exe.html
Relevancy 70.95%

Hey guys First time poster long time lurker here The last couple of days I've been ravaged by BSODs I did a memtest and found out that I had a bad ram stick I replaced the ram stick and did a clean install of Windows Home Premium x and installed my drivers as well as Avast Antivirus I am still getting BSODs I did another memtest on my new ram together and individually and both sticks tested fine One of the by ntoskrnl.exe caused IRQL_NOT_LESS_OR_EQUAL BSOD dump files mentioned Avast as the issue After some trouble BSOD releating to Avast I was able to uninstall it in Safe Mode I then proceeded to install Panda Antivirus and had similar issues with it so I have since uninstalled that antivirus as well Right now I am using BSOD IRQL_NOT_LESS_OR_EQUAL caused by ntoskrnl.exe Windows Security Essentials until I can figure out what is causing my BSODs The BSODs seem to be happening randomly but can be triggered faster by me opening launching the quot World of Warcraft quot launcher I have my DM Logs attached to this forum Thanks in advance for any help that you can give

A:BSOD IRQL_NOT_LESS_OR_EQUAL caused by ntoskrnl.exe

Hello and welcome Mc Large mate run these for starters

http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html

http://www.sevenforums.com/tutorials/433-disk-check.html < use the /f and /r options in Option2 if necessary

http://www.superantispyware.com/

http://www.malwarebytes.org/products/malwarebytes_free/

http://www.bleepingcomputer.com/download/adwcleaner/

download from bleeping computer ? delete any rubbishthese find.
the firs two can be done in safe mode if you have to

http://www.sevenforums.com/bsod-help-support/346808-bsod-irql_not_less_or_equal-caused-ntoskrnl-exe.html
Relevancy 70.95%

Hello, earlier today I had two BSODs, pretty much minutes after each other. I have no idea what's causing them, but I've dug out two .dmp files that's attached to the post. I hope that you're able to help me :)

Cheers,

~ Denieru

A:BSOD, Probably caused by: ntoskrnl.exe ( nt+1509a0 )

Sorry for the delay in responding. There just aren't that many people who do BSOD analysis, so at times we get a bit overwhelmed!

Do you still need help with this problem?
I will be notified if you reply to this topic and will respond within 48 hours.

http://www.eightforums.com/bsod-crashes-debugging/64503-bsod-probably-caused-ntoskrnl-exe-nt-1509a0.html
Relevancy 70.95%

Hi all,

I've been experiencing BSODs over the past few days, caused by both hpdskflt.sys and ntoskrnl.exe (according to BlueScreenView). Could somebody take a look at the attached dump files and offer and any advice on solving this?

Your help is greatly appreciated.
System info is below:

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 8, 64 bit
Processor: AMD E1-1200 APU with Radeon(tm) HD Graphics, AMD64 Family 20 Model 2 Stepping 0
Processor Count: 2
RAM: 1634 Mb
Graphics Card: Microsoft &#22522;&#26412;&#12524;&#12531;&#12480;&#12522;&#12531;&#12464; &#12489;&#12521;&#12452;&#12496;&#12540;, 10 Mb
Hard Drives: C: Total - 289546 MB, Free - 252510 MB; D: Total - 14908 MB, Free - 1962 MB;
Motherboard: Hewlett-Packard, 18D4
Antivirus: Windows Defender, Disabled
 

https://forums.techguy.org/threads/bsod-caused-by-ntoskrnl-exe-and-hpdskflt-sys.1091906/
Relevancy 70.95%

Hi,

I built a new computer a few months ago and I have recently been getting random hangs/freezes on my computer where nothing responds and I have to turn power off/on again. I did a fresh install of windows to try and sort things out but now i've been getting random BSOD instead. There's no pattern to them and they could happen at any point.

BlueScreenView says from the dmp's that the driver causing it is ntoskrnl.exe which seems to have many possible hardware/driver causes.

I ran memtest for 13 hours and that came back with 0 errors so I don't think its my RAM.

If anyone could look at my dmps to try and give me more of a clue of whats causing this problem I would be very grateful

Relevancy 70.95%

I have had my computer BSOD twice in the past couple of days for seemingly no reason at random times.
My computer temps are all bellow 40c after reboot and I have nothing overclocked.

http://www.sevenforums.com/bsod-help-support/385915-bsod-caused-driver-ntoskrnl-exe.html
Relevancy 70.95%

So my Windows 7 Ultimate started bugging out of me a couple days ago. Problem first started right after an windows update I believe, and originally presented as no desktop loading after log on, only a black screen with a cursor. Restored, ran chkdsk and repair and they problem disappeared but now these unexpected crashes keep popping up. Have never actually seen the BSOD yet, computer is always rebooted when I come back to it. Here's the skydrive link for the mini dumps:
https://skydrive.live.com/redir?resi...EfroJFd3UMxyxk
Thanks for any help!

A:BSOD Randomly Caused by ntoskrnl.exe

Welcome

Look for an update on your Synaptics Touchpad Driver

Code:
>[ 16, 2] 0 e1 fffffa8007c874b0 00000000 fffff80002ec5ce0-fffffa800963e970 Success Error Cancel pending
Unable to load image \SystemRoot\system32\DRIVERS\SynTP.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for SynTP.sys
*** ERROR: Module load completed but symbols could not be loaded for SynTP.sys
\Driver\SynTP nt!IopUnloadSafeCompletion
Args: 00014400 00000001 00000004 00000002
[ 0, 0] 0 0 00000000 00000000 00000000-fffffa800a569450

Args: 00000000 00000000 00000000 00000000
0: kd> lmvm SynTP
start end module name
fffff880`04840000 fffff880`048a7000 SynTP T (no symbols)
Loaded symbol image file: SynTP.sys
Image path: \SystemRoot\system32\DRIVERS\SynTP.sys
Image name: SynTP.sys
Timestamp: Fri Oct 14 08:34:52 2011 (4E979FCC)
CheckSum: 00060FAA
ImageSize: 00067000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Source:Driver Reference Table
SynTP.sys Windows process - What is it?

Get the latest drivers for your Intel Graphics driver

Code:
fffff880`033e7648 fffff880`04cab048Unable to load image \SystemRoot\system32\DRIVERS\igdkmd64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for igdkmd64.sys
*** ERROR: Module load completed but symbols could not be loaded for igdkmd64.sys
igdkmd64+0xa9048
Source: Intel Download Center
Run Disk Check again Disk Check

Let us know the results

http://www.sevenforums.com/bsod-help-support/258662-bsod-randomly-caused-ntoskrnl-exe.html
Relevancy 70.95%

I recently built a new computer with hardware:

Gigabyte GA-F2A68HM-DS2 (rev 1.0)
AMD A10-7970k R7
CORSAIR DDR3 8GB - CMZ8GX3M1A1600C10

Running Win8.1 Pro 64 bit
I had initially installed Windows 10 Education but it was giving me a whole lot of errors (all drivers installed and updated) mostly with "probably caused by: ntoskrnl.exe" and most often appeared when playing Minecraft.

I've now installed Win 8.1, hoping that might solve my problems. But I still get the same errors - though they are less frequent and more randomly (not really related to minecraft now).

I've run a virus check, memory diagnostic, system repair, but nothing has relaly helped. Any clues?

(Dump files from Win8.1 are attached)

A:BSOD - probably caused by: ntoskrnl.exe ( nt+14e8a0 )

BSOD Posting Instructions

http://www.eightforums.com/bsod-crashes-debugging/72404-bsod-probably-caused-ntoskrnl-exe-nt-14e8a0.html
Relevancy 70.95%

This is my crash dump Code ntoskrnl.exe BSOD driver caused by Dump File - - dmp Crash Time Bug Check String MEMORY MANAGEMENT Bug Check Code x a Parameter Parameter fffffa f f Parameter ffff BSOD caused by driver ntoskrnl.exe Parameter Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe c File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win gdr - Processor x Crash Address ntoskrnl exe c Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size It only started happening yesterday I used Uniblue DriverScanner to find a sound driver for my sound card so that I didn t have to open up my PC and check the serial number DriverScanner found a few other drivers as well which I installed After a reboot my PC was fine for a while until I started to play games when I play games I almost always get this BSOD perhaps because they are RAM intensive I went to restore my drivers but DriverScanner had not made any restore points even though it said it was doing so during the installation of the new drivers It s the first time I have used software to download and install my drivers and I won t be using it again I am wondering whether to try a system restore but if anybody else has had this problem then your input would be greatly appreciated Code Tech Support Guy System Info Utility version OS Version Microsoft Windows Ultimate bit Processor Intel R Core TM i CPU GHz Intel Family Model Stepping Processor Count RAM Mb Graphics Card ATI Radeon HD Series Mb Hard Drives C Total - MB Free - MB Motherboard ASUSTeK Computer INC P H -M SI Antivirus avast Antivirus Updated and Enabled nbsp

Relevancy 70.95%

Hello a month or so ago just couple of months after I bought a new PC pretty decent expensive for my country I started to experience a lot of BSODs only at the time I started any game or any video file Sometimes I could play for - hours or watch a video sometimes it crashes - minutes after I start a game It works fine while I keep browsing internet in Mozilla though First I thought my main drive - SSD crashed - we unplugged it and tried to work on my older HDDs which I kept from my old PC Same problem We re-installed Windows multiple caused ntoskrnl.exe by BSOD multiple times it kept showing the problem Usually it does not start right after some new action was taken - like If I change HDD and multiple BSOD caused by ntoskrnl.exe install a new windows here a day two maybe it works ok with no BSODs at all BlueScreenView shows mostly always cant recon a different result a problem with ntoskrnl exe Once I thought my memory was an issue but - circles of Memtest didn't show any problems at all I run the latest drivers for my graphics card nvidia geforce gtx ti and I don't know wheter my video card can cause the problem What I know is thats its definetely not the HDD or probably my memory so I can only think about motherboard or graphics card problems And to be clear at first my PC just got stuck in games and I had to reboot it sometimes graphics in games crashed like flashing or everything was very smooth blur sorry for my english and a week or two after it started to give me BSOD all the time in games videos I used Win driver verifier and as expected multiple BSOD caused by ntoskrnl.exe everything was clear I'm not good at technical side of the issue but getting a little bit desperate to find a solution I decided to ask for help from the pro's here are multiple BSOD caused by ntoskrnl.exe my dumps of BlueScreenView Dump File - - dmp Crash Time Bug Check String IRQL NOT LESS OR EQUAL Bug Check Code x a Parameter Parameter Parameter Parameter fffff ece Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe c File Description NT Kernel amp System Product Name Microsoft reg Windows reg Operating System Company Microsoft Corporation File Version win gdr - Processor x Crash Address ntoskrnl exe c Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time Bug Check String IRQL NOT LESS OR EQUAL Bug Check Code x a Parameter Parameter Parameter Parameter fffff ece Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe c File Description NT Kernel amp System Product Name Microsoft reg Windows reg Operating System Company Microsoft Corporation File Version win gdr - Processor x Crash Address ntoskrnl exe c Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time Bug Check String PFN LIST CORRUPT Bug Check Code x e Parameter Parameter eb ae Parameter Parameter Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe c File Description NT Kernel amp System Product Name Microsoft reg Windows reg Operating System Company Microsoft Corporation File Version win gdr - Processor x Crash Address ntoskrnl exe c Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time Bug Check String IRQL NOT LESS OR EQUAL Bug Check Code x a Parameter Parameter Parameter Parameter fffff abece Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe c File Description NT Kernel amp System Product Name Microsoft reg Windows reg Operating System Company Microsoft Corporation File Version win gdr - Processor x Crash Address ntoskrnl exe c Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Siz... Read more

https://social.technet.microsoft.com/Forums/en-US/4c1f66a5-899f-47b6-bea4-8a98576e1128/multiple-bsod-caused-by-ntoskrnlexe?forum=w7itproperf
Relevancy 70.95%

Approximately a week ago BCCode caused by ntoskrnl.exe BSOD probably 50, I decided to overclock a bit my CPU I did everything according the manuals and the internet knowledge Sadly yesterday I had a persisting problem - when I was turning on the computer my monitor didn't wake up from standing by mode Fix for that was restart which was bringing everything BSOD BCCode 50, probably caused by ntoskrnl.exe back to normal BSOD BCCode 50, probably caused by ntoskrnl.exe Today I experienced major problem when was listening to music on iTunes Appeard BSOD Loading bios defaults didn't work It seems that something BSOD BCCode 50, probably caused by ntoskrnl.exe is corrupted Below I paste my crash dump file - - dmp - Speedy Share - upload your files here Also FYI temperatures were monitored and everything was alright - CPU - C in stress GPU C in stress Here are my specs Asus P K C D ghz vcore V OCZ Platinium Rev GB mhz - - - vcore V Seagate GB Chieftec GPS- A I will be really grateful for your support because it is the second time this year even though I changed my cpu

A:BSOD BCCode 50, probably caused by ntoskrnl.exe

The first step would be to reverse the changes on overclocking the CPU to Defaults.
The next thing would be to run Check Disk. go to Start/Search and type CMD, Right click the CMD results and Run As Administrator. In the Elevated Command Prompt type chkdsk /R and press enter. Now type a Y for Yes and restart the computer. Check Disk will start at next bootup and may take a while.
If you continue to have problems, please click on this link and post in that section of the forum Blue Screen of Death (BSOD) Posting Instructions - Windows 10, 8.1, 8, 7 & Vista

http://www.techsupportforum.com/forums/f217/bsod-bccode-50-probably-caused-by-ntoskrnl-exe-938986.html
Relevancy 70.95%

Hello I just can't get rid of these blue screens ntoskrnl.exe by BSOD [SOLVED] caused and quite honestly they are driving me insane I returned my other GB [SOLVED] BSOD caused by ntoskrnl.exe hard drive that I was having some problems with a few days ago so now im stuck on this single gb one I was hoping that if I ran applications from the healthy gb hard drive my problems will go away They didn't I also bought new rams but they were set on MHz frequency but they are certified for so I manually overclocked them My problems persisted I changed my ram voltage manually too No luck So now I decided to leave it on all its stock settings Still getting blue screens Just recently I have discovered that almost all my bsod-s are caused by ntosknl exe which would explain why blue screens have started when I installed windows I had no [SOLVED] BSOD caused by ntoskrnl.exe blue screens on xp for more than years I have found this hotfix and installed it hoping to get rid of blue screens http support microsoft com kb en-us But no they are still here So now im pretty sure that im out of options Blue screens mostly occur when im unraring some files playing games or doing anything that eats up my pc resources If you don't have any solutions im just going to go back to xp since everything worked fine then I have used WhoCrashed to analyze my crash dumps and in every single one of them error is KMODE EXCEPTION NOT HANDLED and the module that is causing it is ntoskrnl exe so now im pretty convinced this isn't hardware related Cheers and thanks

A:[SOLVED] BSOD caused by ntoskrnl.exe

Hi -

ntoskrnl.exe = the Windows NT Kernel & Executive. It a default listed when no other probable cause of a BSOD can be found.

The bugcheck on both BSODs were the same -

0x1e (0xc0000005,,,) = kernel threw an exception - 0xc0000005 = memory access violation

These 2 drivers are a problem - sptd.sys is known to cause BSODs in Windows 7 & Vista; the second is way too old for Windows 7 RTM -

Code:
sptd.sys Sun Oct 11 16:55:14 2009 (4AD24632) - Daemon/ Alcohol

RTCore64.sys Wed May 25 02:39:12 2005 (42941D90) - Riva Tuner
Remove Daemon Tools/ Alcohol 120.

Remove Riva Tuner.

If BSODs persist, run the Driver Verifier -- http://jcgriff2.com/driver_verifier.htm


Windbg Logs
--> http://jcgriff2.net/BSOD_Logs/_99-db..._jcgriff2_.txt
--> http://jcgriff2.net/BSOD_Logs/_99-db...riff2_.txt.zip

Regards. . .

jcgriff2


`

BSOD BUGCHECK SUMMARY

Code:
Built by: 7600.20738.amd64fre.win7_ldr.100618-1621
Debug session time: Sun Oct 17 07:59:49.393 2010 (GMT-4)
System Uptime: 0 days 0:58:47.893
Probably caused by : ntkrnlmp.exe ( nt!KiDispatchException+1b9 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x1E
PROCESS_NAME: csrss.exe
Bugcheck code 0000001E
Arguments ffffffff`c0000005 fffffa80`05efb1d0 00000000`00000000 00000000`05fbd060

??????????????????????????????????????????????????????????????????????????????????????``

Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Sat Oct 16 19:57:04.558 2010 (GMT-4)
System Uptime: 0 days 3:23:07.059
Probably caused by : ntkrnlmp.exe ( nt!IopAllocateIrpPrivate+c7 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x1E
PROCESS_NAME: csrss.exe
Bugcheck code 0000001E
Arguments ffffffff`c0000005 fffff800`02a96837 00000000`00000000 00000000`00000a00

??????????????????????????????????????????????????????????????????????????????????????``


by jcgriff2

J. C. Griffith, Microsoft MVP

https://mvp.support.microsoft.com/profile/Griffith

www.jcgriff2.com


??????????????????????????????????????????????????????????????????????????????????????

http://www.techsupportforum.com/forums/f299/solved-bsod-caused-by-ntoskrnl-exe-522289.html
Relevancy 70.95%

Good Day!

Please is there anyone who can help solve this problem?
My computer is automatically shut down and after starting im seeing report

Bug Check Code : 0x00000124
Parameter 1 : 00000000`00000000
Parameter 2 : fffffa80`083688f8
Parameter 3 : 00000000`00000000
Parameter 4 : 00000000`00000000
Caused By Driver : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+4b2aec
File Description : NT Kernel & System

Motherboard:GA-F2A55M-Ds2 (rev.3) fm2+/fm2
Processor: AMD KAVERI A10 7850K 3.70GHZ
RAM: HYPER X FURY 8GB (2X4) 1866MHZ
GRAPHICS CARD: RADEON R7 250 1GB GDDR5 WITH BOOST
PSU: POWER FUL 600W
OS: WINDOWS 7 ULTIMATE 64 BIT
Drivers:all are updated
(Dual Graphics Enabled)

I've already run:
memtest86 test 13 no errors
sfc /scannow
chkdsk
malwarebytes scan

DM log collector
Attachment 365283
dmp file
Attachment 365285

A:BSOD Caused By Driver : ntoskrnl.exe

Please help
Thank you

http://www.sevenforums.com/bsod-help-support/375004-bsod-caused-driver-ntoskrnl-exe.html
Relevancy 70.95%

Dear All,

I recently upgraded to Windows 10 Pro from 7 Pro and facing problem of BSOD, attached are minidumpts captured from my system for different dates.

Please can any one help me on this to resolve it. Really making problem for me and I am unable to figure out the root.

Waiting for help.

Regards,
Wajeeh

A:BSOD caused by driver ntoskrnl.exe

Hello, any body out there to help

http://www.tenforums.com/bsod-crashes-debugging/40348-bsod-caused-driver-ntoskrnl-exe.html
Relevancy 70.95%

Hi All,

I have found multiple helpful answers on this forum regarding similar situations yet none that seems to apply to mine specifically.

Though I'm sure my dumps will be more helpful than I could ever be, here's what I noticed:

1. the installation of a new external drive (hp 2TB) seems to increase bsod occurences

2. there seems to be a problem with how my ram is getting used as I can always predict a crash when I go past 9 gig (out of 16).

3. I also read a post which suggested to remove Kaspersky. I'm not using it yet I do have BidDefender running.

I did run Windows Memory Diagnostics which didn't find any problems.
Thanks for your help as I've wasted 2 days with no results whatsoever on my own...

Seb.

A:BSOD which seems to be caused by IRQL_NOT_LESS_OR_EQUAL and ntoskrnl.e

Hi -

Please run - BSOD Posting Instructions

Regards. . .

jcgriff2

http://www.sevenforums.com/bsod-help-support/235760-bsod-seems-caused-irql_not_less_or_equal-ntoskrnl-e.html
Relevancy 70.95%

Hi,

I have a friend who is using Windows XP Service Pack 3 is having a random BSOD error.

From the crash dump file, the report stated this error: Probably caused by : ntoskrnl.exe ( nt+cc548 ).

I do not know what have caused this issue and the system is recently formatted.

It is Dell Optiplex 755 PC with ATI Radeon HD2400 graphic card. Service Tag: FF55V1S

The link for the minidump file: Mini012511-01.dmp - Windows Live

Would appreciate any kind assistance.

Thank you very much.

A:Probably caused by : ntoskrnl.exe ( nt+cc548 ) BSOD

While we look into this, the first thing I'd do is update all your drivers. Go to support.dell.com and type in your service tag, and it will give you a list of drivers for the hardware installed on your computer. A quick Google search of the problem has pointed to the graphics card in a few other cases, so I'd start with that one and see if that resolves the problem.

http://www.techsupportforum.com/forums/f10/probably-caused-by-ntoskrnl-exe-nt-cc548-bsod-546238.html
Relevancy 70.95%

I have freshly installed windows 8.1 Enterprise (x64) and also installed the latest drivers for everything.

My configuration:
ASUS P8Z77-M
Intel i5-3570K
2X4GB DDR3 Kingston HyperX Predator
ATI Radeon HD6950 2GB
WD 1TB Caviar Black
CoolerMaster 550W Real Power

The BSOD is appearing whem I am playing games (mainly while playing Watch Dogs or CS:GO).

Tried with Driver Verifier for 24 hours, same result as before.
Tried Memtest86+ for 10+ hours, no problems.

Here are my dump files and a screenshot from BSOD Viewer. Any help or suggestion would be nice

Attachment 44495

A:BSOD caused by dxgmms1.sys / ntoskrnl.exe

You have a WD 1TB Caviar Black HD with the 2008 driver which is known for BSOD.
wdcsam64 fffff800`f0808000 fffff800`f080b880 Wed Apr 16 10:39:08 2008 (4805bb2c) 0000d887 wdcsam64.sys
Driver Description: Western Digital SCSI Arcitecture Model (SAM) WDM driver
2008 driver version has known BSOD issues in Windows
Driver Update Site: WD Support / Downloads / Select Product
Please update to the latest version.

Many of your dumpfiles are related to your graphiccard, they are Probably caused by : dxgmms1.sys ( dxgmms1!VIDMM_SEGMENT::TrimAllProcesses+fc ) and Probably caused by : atikmdag.sys ( atikmdag+36fc4 ).
But i see in the latest dumpfile you already updated the videocard driver.

If you keep bsod related to your graphiccard.
Test your graphiccard with prime 95.

Download and Tutorial Prime95

http://www.sevenforums.com/tutorials/100352-hardware-stress-test-prime95.html

http://www.eightforums.com/bsod-crashes-debugging/47605-bsod-caused-dxgmms1-sys-ntoskrnl-exe.html
Relevancy 70.95%

Windows XP Kernel Version Service Pack UP Free x compatible Product WinNt Built by xpsp sp gdr - Kernel base x d PsLoadedModuleList x a Debug session time Tue Dec GMT- f c f b sysaudio unavailable f f c srv Mon May FFDAD f b f e mrxdav Tue Aug B f d f d mdmxsdk Mon Oct BD B f f ndisuio Tue Aug C E f cdb f cf dump atapi Tue Aug B D f d b f d e eeCtrl Sun Dec C EF f d e f ddc mrxsmb Tue Jan EDE A f ddd f e a rdbss Wed Oct D f e f e SPBBCDrv Wed Mar B f f f f f ( ) ntoskrnl.exe Help Probably : nt!KdPitchDebugger+ef4 by BSOD!! caused ipnat Wed Sep B f f f f d afd Tue Aug EB f f f f c netbt Tue Aug ECC f f f fb ce SYMTDI Tue Apr D AC f fb f fc BSOD!! Help Probably caused by : ntoskrnl.exe ( nt!KdPitchDebugger+ef4 ) e asnttdi Thu May CDB E f fc f bd tcpip Wed May CC f c f e ipsec Tue Aug EC f f b Savrtpel Fri Feb E f b f ac SYMEVENT Mon Mar F EC f f d savrt Fri Feb C f f update Tue Aug B f f rdpdr Tue Aug BA f f rasacd Fri Aug B D CB f f Cdfs Tue Aug EB f f Fips Fri Aug B DC f f e psched Tue Aug C f f a ndiswan Tue Aug EC f a f bc parport Tue Aug B f bd f e portcls Tue Aug F f e f e ALCXWDM Tue Nov DE A f f f b ks Tue Aug EF f b f d e USBPORT Tue Aug D f d f aa winachcf Tue Apr CCF FF f ab f be VIDEOPRT Tue Aug D f bf f e d s gnbm Wed Nov DC FC f e f e f mouhid Fri Aug B D FD f ea f ec hidusb Fri Aug B D f f f MODEMCSA Fri Aug B D f e f Mup Tue Aug EF f f a NDIS Tue Aug EC f f Ntfs Tue Aug EEA f f KSecDD Tue Aug B f a f bf sr Tue Aug CDE f c f a fltmgr Tue Aug BAD f b f atapi Tue Aug B D f f dmio Tue Aug D f f a ftdisk Fri Aug B D f a f b a pci Tue Aug D f b f e d ACPI Tue Aug D f f c isapnp Fri Aug B D f f MountMgr Tue Aug B f f c VolSnap Tue Aug B E f f e disk Tue Aug B f f CLASSPNP Tue Aug EC f f viaagp Tue Aug D E f f a NDProxy Fri Aug B D C f c f d usbhub Tue Aug D f e f f d HIDCLASS Tue Aug D f f netbios Tue Aug C f f wanarp Tue Aug C f f d intelppm Tue Aug B f f AFS K Sat Feb EA C f f a cdrom Tue Aug B f a f b redbook Tue Aug B f b f c b drmk Tue Aug D A f c f d fetnd bv Wed Dec C EDC f d f e d serial Tue Aug F f e f f e i prt Tue Aug ECC f f f a rasl tp Tue Aug EBD f a f a raspppoe Tue Aug C f a f a d raspptp Tue Aug EC f a f a msgpc Tue Aug C B f a f a f termdd Tue Aug B C f a f a e PCIIDEX Tue Aug B C f a f a PartMgr Fri Aug B DC A f af f af watchdog Tue Aug D f b f b TDTCP unavailable f b f b Modem Tue Aug D f b f b d usbuhci Tue Aug D f b f b usbehci Tue Aug D f b f b f fdc unavailable f b f b kbdclass Tue Aug B f b f b c TDI Tue Aug D f b f b ptilink Fri Aug B D f b f b c raspti Fri Aug B D C f b f b a mouclass Tue Aug B f b f b e HIDPARSE Tue Aug D F f bd f bdd vga Tue Aug D A f c f c a Msfs Tue Aug B f c f c Npfs Tue Aug B f c f c b BOOTVID Fri Aug B D f ca f ca Dxapi Fri Aug B D F f cc f cc c serenum Tue Aug B A f cc f cc gameenum Tue Aug D f cc f cca ndistapi Fri Aug B D C f cec f cefc mssmbios Tue Aug D f d f d b kdcom Fri Aug B D f d a f d b WMILIB Fri Aug B D B f d c f d d viaide Tue Aug B E f d e f d f dmload Fri Aug B D f d f d swenum Tue Aug B f d f d USBD Fri Aug B D f d f d f Fs Rec Fri Aug B D f d f d Beep Fri Aug B D E f d a f d b mnmdd Fri Aug B D f d c f d d RDPCDD Fri Aug B D C f d e f d f dump WMILIB Fri Aug B D B f d a f d ba ParVdm Fri Aug B D D f de f de d dxgthk Fri Aug B D f e f e b Null Fri Aug B D EB f eaa f eaac audstub Fri Aug B D BC Unloaded modules ef ef b kmixer sys Timestamp unavailable Checksum ef ef b kmixer sys Timestamp unavailable Checksum ef ef b kmixer sys Timestamp unavailable Checksum ef ef b kmixer sys Timestamp unavailable Checksum ef ef b kmixer sys Timestamp unavailable Checksum ef ef b kmixer sys Timestamp unavailable Checksum ef ef b kmixer sys Timestamp unavailable Checksum ef ef b kmixer sys Timestamp unavailable Checksum ef a ef a kmixer sys Timestamp unavailable Checksum efcfc efd e naveng sys Timestamp unavailable Checksum efd e efdc navex sys Timestamp unavailable Checksum ef d ef e EraserUtilDr Timestamp unavailable Checksum ef a ef a kmixer sys Timestamp unavailable ... Read more

http://www.techspot.com/community/topics/bsod-help-probably-caused-by-ntoskrnl-exe-nt-kdpitchdebugger-ef4.42626/
Relevancy 70.95%

I would appreciate some help please I ntoskrnl.exe BSOD DRIVER_POWER_STATE_FAILURE caused by have a Sony VAIO VPCSB This BSOD DRIVER_POWER_STATE_FAILURE caused by ntoskrnl.exe is my work laptop and was working fine until I decided to set up and alternative user account for home use As part of this process BSOD DRIVER_POWER_STATE_FAILURE caused by ntoskrnl.exe I restored a backup of files from my previous laptop just docs and pictures I changed a load of settings to be how I like them and installed a few of my favorite programs During this process windows also shut down to install updates Now when I leave the PC to idle I get the attached BSOD I am wondering whether it is related to to the laptop BSOD DRIVER_POWER_STATE_FAILURE caused by ntoskrnl.exe going into sleep mode as I have set it to after an hour in the power management settings The most recent BSOD was whilst Windows was shutting down to install some more updates and as such it rolled back to before the update First time I have posted here hope this info is sufficient to get started Thanks in advance

A:BSOD DRIVER_POWER_STATE_FAILURE caused by ntoskrnl.exe

Hi and welcome to the forums






Quote:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 1000009F, {4, 258, fffffa80042e2b50, fffff80000b9c3d0}
Unable to load image \SystemRoot\system32\DRIVERS\GenHC.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for GenHC.sys
*** ERROR: Module load completed but symbols could not be loaded for GenHC.sys
Probably caused by : GenHC.sys ( GenHC+f91e )
Followup: MachineOwner
---------
0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
DRIVER_POWER_STATE_FAILURE (9f)
A driver is causing an inconsistent power state.


Problem driver: GenHC.sys

Relating to: Logilink usb network server driver

Timestamp: Tue Oct 06 04:11:35 2009 (4ACAB567)
Please update the outdated driver found here:






Quote:
http://www.logilink.eu/content/support/download.htm?seticlanguage=en







Quote:
fffff880`0ebe34b8 fffff880`04c74620Unable to load image \SystemRoot\System32\Drivers\aswSP.SYS, Win32 error 0n2
*** WARNING: Unable to verify timestamp for aswSP.SYS
*** ERROR: Module load completed but symbols could not be loaded for aswSP.SYS
aswSP+0x2e620
fffff880`0ebe2508 fffff880`0484c164Unable to load image \SystemRoot\System32\Drivers\aswSnx.SYS, Win32 error 0n2
*** WARNING: Unable to verify timestamp for aswSnx.SYS
*** ERROR: Module load completed but symbols could not be loaded for aswSnx.SYS
aswSnx+0x8164


Please uninstall Avast from your system:






Quote:
http://www.avast.com/uninstall-utility


Install Microsoft Security Essentials as an alternative.
Recommended from a strict BSOD perspective, compatibility & stability
compared to other antiviruses/internet security software.






Quote:
Microsoft Security Essentials - Microsoft Windows







Quote:
fffff880`035a0668 fffff880`05a8979cUnable to load image \SystemRoot\system32\DRIVERS\igdpmd64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for igdpmd64.sys
*** ERROR: Module load completed but symbols could not be loaded for igdpmd64.sys
fffff880`05a22000 fffff880`065cc100 igdpmd64 igdpmd64.sys Fri Jun 10 19:16:00 2011 (4DF25F60)


Problem Driver: igdpmd64.sys

Relating to: Intel Graphics Driver

Please update your Intel driver, found here:






Quote:
Intel Download Center


or use the Intel Driver Update utility and see if it picks up any newer drivers:






Quote:
http://www.intel.com/p/en_US/support/detect?iid=dc_iduu


Or you may find drivers on the Vaio support website:






Quote:
Sony : VPCSB3C5E updates | Download updates for VPCSB3C5E


Post back any progress / observations

Cheers

Dave

http://www.sevenforums.com/bsod-help-support/278898-bsod-driver_power_state_failure-caused-ntoskrnl-exe.html
Relevancy 70.95%

I have faced a BSOD for days when waking the laptop up from sleep and then it takes minutes to start up Refreshing and resetting do not solve the problem I have attached the SF zip file The crashes are usually caused by On Tue AM GMT your computer crashed crash dump file C Windows Minidump - - dmp This was probably caused Many caused by: (nt+0x14DCA0) ntoskrnl.exe BSOD's by the following module ntoskrnl exe nt x DCA Bugcheck code x F x xFFFFE CF xFFFFD A xFFFFE A F Error DRIVER POWER STATE FAILURE file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System Bug check description This bug check indicates that the driver is in an inconsistent or invalid power Many BSOD's caused by: ntoskrnl.exe (nt+0x14DCA0) state This appears to be a typical software driver Many BSOD's caused by: ntoskrnl.exe (nt+0x14DCA0) bug and Many BSOD's caused by: ntoskrnl.exe (nt+0x14DCA0) is not likely to be caused by a hardware problem The crash took place in the Windows kernel Possibly this problem is caused by another driver that cannot be identified at this time Occasionally it's caused by crash dump file C Windows memory dmp This was probably caused by the following module ntkrnlmp exe nt KeBugCheckEx x Bugcheck code x F x xFFFFE FAF xFFFFD xFFFFCF D D Error DRIVER POWER STATE FAILURE And only once On Mon AM GMT your computer crashed crash dump file C Windows Minidump - - dmp This was probably caused by the following module iastora sys iaStorA x B E Bugcheck code x F x xFFFFE C xFFFFD A xFFFFE C Error DRIVER POWER STATE FAILURE file path C Windows system drivers iastora sys product Intel Rapid Storage Technology driver company Intel Corporation description Intel Rapid Storage Technology driver - x Bug check description This bug check indicates that the driver is in an inconsistent or invalid power state I've done all kinds of command prompts like scannow and chkdsk F etc but this doesn't solve the problem I'd really appreciate any help Thank you Von

A:Many BSOD's caused by: ntoskrnl.exe (nt+0x14DCA0)

Intel Rapid Storage sucks, remove it via Control Panel\All Control Panel Items\Programs and Features.

http://www.eightforums.com/bsod-crashes-debugging/39446-many-bsods-caused-ntoskrnl-exe-nt-0x14dca0.html
Relevancy 70.95%

Here are the details On Sun AM GMT your computer crashed crash dump file C Windows Minidump - - dmp This was probably caused by the following module ntoskrnl exe nt x A F C Bugcheck code x E xFFFFFFFFC xFFFFF BEFF C xFFFFF xFFFFF FB Error SYSTEM THREAD EXCEPTION NOT HANDLED M file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System by to and BSOD ntoskrnl.exe How fix ntkrnlmp.exe caused Bug check description This indicates that a system thread generated an exception which the error handler did not catch This appears to be a typical How to fix BSOD caused by ntoskrnl.exe and ntkrnlmp.exe software driver bug and is not likely to be caused by a hardware problem The crash took place in the Windows kernel Possibly this How to fix BSOD caused by ntoskrnl.exe and ntkrnlmp.exe problem is caused by another driver which cannot be identified at this time On Sun AM GMT your computer crashed crash dump file C Windows memory dmp This was probably caused by the following module ntkrnlmp exe nt KeBugCheckEx x Bugcheck code x E xFFFFFFFFC xFFFFF BEFF C xFFFFF xFFFFF FB Error SYSTEM THREAD EXCEPTION NOT HANDLED Bug check description This bug check indicates that a system thread generated an exception that the error handler did not catch The crash took place in the Windows kernel Possibly this problem is caused by another driver which cannot be identified at this time On Sun AM GMT your computer crashed crash dump file C Windows Minidump - - dmp This was probably caused by the following module ntoskrnl exe nt x F Bugcheck code x A x xFFFFFFFFC D xFFFFFA BD x Error KERNEL DATA INPAGE ERROR file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System Bug check description This bug check indicates that the requested page of kernel data from the paging file could not be read into memory The crash took place in the Windows kernel Possibly this problem is caused by another driver which cannot be identified at this time On Sun AM GMT your computer crashed crash dump file C Windows Minidump - - dmp This was probably caused by the following module ntoskrnl exe nt x F Bugcheck code x A x xFFFFFFFFC D xFFFFFA F C x Error KERNEL DATA INPAGE ERROR file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System Bug check description This bug check indicates that the requested page of kernel data from the paging file could not be read into memory The crash took place in the Windows kernel Possibly this problem is caused by another driver which cannot be identified at this time

A:How to fix BSOD caused by ntoskrnl.exe and ntkrnlmp.exe

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

If you are overclocking STOP
We could also use some system information, which you can get easily by running msinfo32.
To do that go to start>run>type msinfo32>enter

When it is finished running go to file>save>name it and upload to us here.
You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.



To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

http://www.sevenforums.com/bsod-help-support/225859-how-fix-bsod-caused-ntoskrnl-exe-ntkrnlmp-exe.html
Relevancy 70.95%

Hi,

I have a friend who is using Windows XP Service Pack 3 is having a random BSOD error.

From the crash dump file, the report stated this error: Probably caused by : ntoskrnl.exe ( nt+cc548 ).

I do not know what have caused this issue and the system is recently formatted.

It is Dell Optiplex 755 PC with ATI Radeon HD2400 graphic card. Service Tag: FF55V1S

The link for the minidump file: http://cid-2e6fca317368a8f0.office.live.com/self.aspx/Public/Mini012511-01.dmp

Would appreciate any kind assistance.

Thank you very much.

A:Probably caused by : ntoskrnl.exe ( nt+cc548 ) BSOD

Download BlueScreenView:
http://www.nirsoft.net/utils/blue_screen_view.html
unzip downloaded file and double click on BlueScreenView.exe to run the program.
when scanning is done, go to EDIT - Select All
Go to FILE - SAVE Selected Items, and save the report as BSOD.txt
Open BSOD.txt in Notepad, copy all of the content, and paste it into your next reply

http://www.bleepingcomputer.com/forums/t/375593/probably-caused-by-ntoskrnlexe-ntcc548-bsod/
Relevancy 70.95%

Hi all I'm caused ntoskrnl.exe+75b80 by BSOD new here and hope somebody can help am at my wits end with a BSOD error code This error occurs specifically and unerringly whenever I apply Twixtor to a clip in either After Effects or Premiere Pro and then scrub through the clip My specs are Windows Ultimate bit Motherboard ASRock n c- s ucc CPU AMD Phenom X Graphics ATI Radeon HD gigs RAM x gb DDR W power unit So far I've run a disk check and a memory check for errors made sure Windows is updated Updated BIOS tried two other graphics cards Nvidia Geforce series and Radeon HD opened up case and BSOD caused by ntoskrnl.exe+75b80 placed a whopping great fan next to it to try and help with temp In addition I've run Malwarebytes HitmanPro TDSS Killer and RegcurePro I've also made sure my drivers are up to date Note my CPU was overclocked from ghz to but one of the first things I did was to bring that back down to its original setting BlueScreenView is telling me the problem lies at ntoskrnl exe b I've zipped up a MiniDump report and attached it to the post if I've done something incorrectly there please let me know as I'm new to this Short of thrashing my pc with a willow branch I'm stuck for answers can anyone help Thanks in advance nbsp - - zip nbsp nbsp KB nbsp nbsp downloads

A:BSOD caused by ntoskrnl.exe+75b80

Welcome,
Nothing positive, just some observations.
The power supply might be a bit light for the load you're trying to put on it. Otherwise I see nothing that stands out as a problem or source of your trouble.
Keep us posted

http://www.bleepingcomputer.com/forums/t/532752/bsod-caused-by-ntoskrnlexe75b80/
Relevancy 70.95%

I just bought a brand new Asus g750jm-bsi7n23 and I keep getting a BSOD called DRIVER_POWER_STATE_FAILURE which is being caused by ntoskrnl.exe. It is getting really irritating, because I just dished out $1,300 on a new laptop and it has already crashed 3-4 times. Any help would be GREATLY appreciated!

Here is the dump file:

==================================================
Dump File : 060914-22328-01.dmp
Crash Time : 6/9/2014 7:13:15 PM
Bug Check String : DRIVER_POWER_STATE_FAILURE
Bug Check Code : 0x0000009f
Parameter 1 : 00000000`00000003
Parameter 2 : ffffe000`0031b060
Parameter 3 : fffff800`d5a9c840
Parameter 4 : ffffe000`012ff830
Caused By Driver : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+14dca0
File Description :
Product Name :
Company :
File Version :
Processor : x64
Crash Address : ntoskrnl.exe+14dca0
Stack Address 1 :
Stack Address 2 :
Stack Address 3 :
Computer Name :
Full Path : C:\Windows\Minidump\060914-22328-01.dmp
Processors Count : 8
Major Version : 15
Minor Version : 9600
Dump File Size : 1,368,104
Dump File Time : 6/9/2014 7:14:17 PM
==================================================

A:DRIVER_POWER_STATE_FAILURE BSOD Caused by ntoskrnl.exe

i am currently having the same problem i just bought the computer a month ago. i don't know if this has anything to do with it but in the event log at the time of crash i get critical kernal-power error 41. i have tried going to my drivers to see if any have an exclamation point showing they are out of date but they all say up to date.

http://www.eightforums.com/bsod-crashes-debugging/47809-driver_power_state_failure-bsod-caused-ntoskrnl-exe.html