Windows Support Forum

Random BSODs - fileinfo.sys, ntoskrnl.exe, netio.sys

Q: Random BSODs - fileinfo.sys, ntoskrnl.exe, netio.sys

Attachment Just put this cheap comp back together with a netio.sys - Random ntoskrnl.exe, fileinfo.sys, BSODs new MOBO and new RAM Updated BIOS to newest version I could find Vista could this be my problem Updated GPU to Updated Windows with all important updates Ran Memtest with no errors Also removed AVG using the remover tool suggested in other posts OS Windows Ultimate X CPU AMD Athalon Motherboard A ME-FM Memory X GB Sticks Komputerbay Graphics Card Random BSODs - fileinfo.sys, ntoskrnl.exe, netio.sys s Nvidia GeForce GT Been randomly getting BSOD here is the recent whocrashed info and I attached the dumps and perfmon report Need anything else any help would be GREAT THANKS On Mon Random BSODs - fileinfo.sys, ntoskrnl.exe, netio.sys PM GMT your computer crashed crash dump file C Windows Minidump - - dmp This was probably caused by the following Random BSODs - fileinfo.sys, ntoskrnl.exe, netio.sys module fileinfo sys fileinfo x Bugcheck code x x xFFFFF A EBB xFFFFF A EBB x Error BAD POOL HEADER file path C Windows system drivers fileinfo sys product Microsoft Windows Operating System company Microsoft Corporation description FileInfo Filter Driver Bug check description This indicates that a pool header is corrupt This appears to be a typical software driver bug and is not likely to be caused by a hardware problem This might be a case of memory corruption More often memory corruption happens because of software errors in buggy drivers not because of faulty RAM modules The crash took place in a standard Microsoft module Your system configuration may be incorrect Possibly this problem is caused by another driver on your system which cannot be identified at this time On Mon PM GMT your computer crashed crash dump file C Windows memory dmp This was probably caused by the following module fileinfo sys fileinfo xC F Bugcheck code x x xFFFFF A EBB xFFFFF A EBB x Error BAD POOL HEADER file path C Windows system drivers fileinfo sys product Microsoft Windows Operating System company Microsoft Corporation description FileInfo Filter Driver Bug check description This indicates that a pool header is corrupt This appears to be a typical software driver bug and is not likely to be caused by a hardware problem This might be a case of memory corruption More often memory corruption happens because of software errors in buggy drivers not because of faulty RAM modules The crash took place in a standard Microsoft module Your system configuration may be incorrect Possibly this problem is caused by another driver on your system which cannot be identified at this time On Mon PM GMT your computer crashed crash dump file C Windows Minidump - - dmp This was probably caused by the following module ntoskrnl exe nt x Bugcheck code x A x xFFFFF x xFFFFF Error MEMORY MANAGEMENT file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System Bug check description This indicates that a severe memory management error occurred This might be a case of memory corruption More often memory corruption happens because of software errors in buggy drivers not because of faulty RAM modules The crash took place in the Windows kernel Possibly this problem is caused by another driver which cannot be identified at this time On Mon AM GMT your computer crashed crash dump file C Windows Minidump - - dmp This was probably caused by the following module netio sys NETIO x B Bugcheck code x x xFFFFFA C CA xFFFFFA C CA x Error BAD POOL HEADER file path C Windows system drivers netio sys product Microsoft Windows Operating System company Microsoft Corporation description Network I O Subsystem Bug check description This indicates that a pool header is corrupt This appears to be a typical software driver bug and is not likely to be caused by a hardware problem This might be a case of memory corruption More often memory corruption happens because of software errors in buggy drivers not because of faulty RAM modules The crash took place in a standard Microsoft module Your system configuration may be incorrect Possibly this problem is caused by another driver on your system which cannot be identified at this time On Sat AM GMT your computer crashed crash dump file C Windows Minidump - - dmp This was probably caused by the following module ntoskrnl exe nt x Bugcheck code x xFFFFFFFFFFFFFF C x xFFFFF A A x Error PAGE FAULT IN NONPAGED AREA file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System Bug check description This indicates that invalid system memory has been referenced This appears to be a typical software driver bug and is not likely to be caused by a hardware problem The crash took place in the Windows kernel Possibly this problem is caused by another driver which cannot be identified at this time On Sat AM GMT your computer crashed crash dump file C Windows Minidump - - dmp This was probably caused by the following module ntoskrnl exe nt x Bugcheck code x A x xFFFFF C x D xFF D FFFFFFFE Error MEMORY MANAGEMENT file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System Bug check description This indicates that a severe memory management error occurred This might be a case of memory corruption More often memory corruption happens because of software errors in buggy drivers not because of faulty RAM modules The crash took place in the Windows kernel Possibly this problem is caused by another driver which cannot be identified at this time On Fri AM GMT your computer crashed crash dump file C Windows Minidump - - dmp This was probably caused by the following module avgidsfiltera sys avgidsfiltera x B Bugcheck code x x xFFFFFA C xFFFFFA FC xFFFFFA C Error BAD POOL HEADER Bug check description This indicates that a pool header is corrupt This appears to be a typical software driver bug and is not likely to be caused by a hardware problem This might be a case of memory corruption More often memory corruption happens because of software errors in buggy drivers not because of faulty RAM modules A third party driver was identified as the probable root cause of this system error It is suggested you look for an update for the following driver avgidsfiltera sys Google query avgidsfiltera sys BAD POOL HEADER On Thu PM GMT your computer crashed crash dump file C Windows Minidump - - dmp This was probably caused by the following module ntoskrnl exe nt x Bugcheck code xBE xFFFFF A x CB F xFFFFF xB Error ATTEMPTED WRITE TO READONLY MEMORY file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System Bug check description This is issued if a driver attempts to write to a read-only memory segment This appears to be a typical software driver bug and is not likely to be caused by a hardware problem The crash took place in the Windows kernel Possibly this problem is caused by another driver which cannot be identified at this time

Relevancy 100%
Preferred Solution: Random BSODs - fileinfo.sys, ntoskrnl.exe, netio.sys

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Random BSODs - fileinfo.sys, ntoskrnl.exe, netio.sys

here is the whocrashed info from today:

On Tue 7/17/2012 6:17:37 AM GMT your computer crashed
crash dump file: C:\Windows\Minidump\071712-30890-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x7F1C0)
Bugcheck code: 0x19 (0x20, 0xFFFFF8A011D126A0, 0xFFFFF8A011D126A0, 0x5000109)
Error: BAD_POOL_HEADER
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft? Windows? Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that a pool header is corrupt.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem. This might be a case of memory corruption. More often memory corruption happens because of software errors in buggy drivers, not because of faulty RAM modules.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver which cannot be identified at this time.
On Tue 7/17/2012 6:17:37 AM GMT your computer crashed
crash dump file: C:\Windows\memory.dmp
This was probably caused by the following module: ntkrnlmp.exe (nt!KeBugCheckEx+0x0)
Bugcheck code: 0x19 (0x20, 0xFFFFF8A011D126A0, 0xFFFFF8A011D126A0, 0x5000109)
Error: BAD_POOL_HEADER
Bug check description: This indicates that a pool header is corrupt.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem. This might be a case of memory corruption. More often memory corruption happens because of software errors in buggy drivers, not because of faulty RAM modules.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver which cannot be identified at this time.

http://www.sevenforums.com/bsod-help-support/240937-random-bsods-fileinfo-sys-ntoskrnl-exe-netio-sys.html
Relevancy 87.72%

Hi I have been nagging my head at this issue for weeks and it has become such a burden and an annoyance that I simply can't deal with it anymore I am on the brink of re-installing my whole Windows just to get rid of this pesky issue A while ago I started experiencing these BSODs caused by netio to ntoskrnl.exe Almost and relating netio.sys hourly BSODs sys IRQL something something aswell At first I thought it was a one time deal as those have happened to me in Almost hourly BSODs relating to netio.sys and ntoskrnl.exe the past Recently in the past few weeks this issue has gotten out of hand It used to be one BSOD a day now it is a BSOD every one hour I would really Almost hourly BSODs relating to netio.sys and ntoskrnl.exe really appreciate if someone could help me out with this I tried using Windows Debugging Tools but I couldn't get them to work properly don't understand how that whole symbol deal works for WinDbg At the bottom you can find a file composed by the log compiler please give me a hand Thanks Almost hourly BSODs relating to netio.sys and ntoskrnl.exe in advance

A:Almost hourly BSODs relating to netio.sys and ntoskrnl.exe

It is a network related BSOD, apparently. But this entry in the raw stack makes me rub my chin .....

Code:
fffff880`031d92a0 fffff880`00fd61a0 ataport!WPP_MAIN_CB
Ataport is storage controller. It is extremely vulnerable to malwares like rootkit. Seeing this entry in a network related BSOD gives a hint of a virus infection.

Scan the system for possible virus infection with the following programs only, not with AVG.
Anti-rootkit utility TDSSKiller
Windows Defender Offline
Now, the network driver is failing ....

Code:
fffff880`031ca938 fffff880`06eeaf6bUnable to load image \SystemRoot\system32\DRIVERS\Rt64win7.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for Rt64win7.sys
*** ERROR: Module load completed but symbols could not be loaded for Rt64win7.sys
Rt64win7+0x7f6b
.... and as there is a scope to update the network driver ....

Code:
Image name: Rt64win7.sys
Timestamp: Tue Aug 26 11:52:08 2014 (53FC2790)
.... update it. Download and install the driver from Realtek ... get the second one from the list (that is the "Win7 and Server 2008 R2 Auto Installation Program") there and install it.

Also, Free up the startup. Windows does not need any other program to auto start with it, but the auto start programs often conflicts and causes various problems including BSODs.
Click on the Start button
Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the “Startup” tab.
Deselect all items other than the antivirus (you may keep Fences too, it is not problematic).
Apply > OK
Accept then restart.
Daemon Tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known BSOD causer. Uninstall Daemon Tools at first. Then download SPTD standalone installer from Disk-Tools.com, and execute the downloaded file as guided below :
Double click to open it.
Click this button only:

If it is grayed out, as in the picture, there is no more SPTD in your system, and you just close the window.
Report us for any further BSOD after doing these.
_______________________________________

Code:
BugCheck D1, {28, 2, 0, fffff880014106fd}

Probably caused by : NETIO.SYS ( NETIO!RtlCopyBufferToMdl+1d )

Followup: MachineOwner
---------

http://www.sevenforums.com/bsod-help-support/369002-almost-hourly-bsods-relating-netio-sys-ntoskrnl-exe.html
Relevancy 82.13%

Hello,

And first of all thank you for spending your time to help us, I'm very grateful.

My PC randomly crashes. The BSOD mentions a couple of things like NETIO.SYS or ntoskrnl.exe :
STOP:0x000000D1 (0x0000000000000028, 0x0000000000000002, 0x0000000000000000, 0xFFFFF8800191E6FD)
NETIO.SYS address FFFFF8800191E6FD base at FFFFF8800190E000, DateStamp 5034f6a0

I would be SOOOO HAPPY guys if you could help me. This BSOD is horrible because it happens randomly (sometimes twice in a day, sometimes once every 2 days). Sometimes I study for my exams and bam BSOD. I'm getting nervous and save my work frequently.

I hope you can help me thanks in advance

A:Random BSOD : DRIVER_IRQL_NOT_LESS_OR_EQUAL, NETIO.SYS & ntoskrnl.exe

Welcome to the forum.

I see this driver being a problem for you. Could you please uninstall it?

Code:
networx.sys Mon Oct 14 04:08:12 2013 (525B19CC)
Please remove all NetWorx software/drivers with Revo Uninstaller Free.

Revo Uninstaller "Free"Use Revo Uninstaller to uninstall stubborn software. Opt for Advance Mode while uninstalling. This allows you to remove leftover registry entries of the software. Link to download: Download Revo Uninstaller Freeware - Free and Full Download - Uninstall software, remove programs, solve uninstall problems

The SFC /SCANNOW Command - System File Checker scans the integrity of all protected Windows 7 system files and replaces incorrect corrupted, changed/modified, or damaged versions with the correct versions if possible. If you have modified your system files as in theming explorer/system files, running sfc /scannow will revert the system files to it's default state.
Link to full tutorial: SFC /SCANNOW Command - System File Checker

Run Disk Check on your Hard Drive(s). This will show you how to run Check Disk or chkdsk in Windows 7 to check a selected hard disk for file system errors and bad sectors on it. With both boxes checked for all HDDs and with Automatically fix file system errors. Post back your logs for the checks after finding them using Check Disk (chkdsk) - Read Event Viewer Log
Link to full tutorial: Disk Check

Let us know if it helps.
Bugcheck Summary:

Code:
Built by: 7601.18247.amd64fre.win7sp1_gdr.130828-1532
Debug session time: Fri Nov 22 09:10:33.766 2013 (UTC + 6:00)
System Uptime: 0 days 13:52:08.499
BugCheck D1, {28, 2, 0, fffff8800191e6fd}
Probably caused by : NETIO.SYS ( NETIO!RtlCopyBufferToMdl+1d )
BUGCHECK_STR: 0xD1
PROCESS_NAME: System
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.18247.amd64fre.win7sp1_gdr.130828-1532
Debug session time: Thu Nov 21 19:17:54.554 2013 (UTC + 6:00)
System Uptime: 0 days 11:59:08.397
BugCheck D1, {28, 2, 0, fffff88001b246fd}
Probably caused by : NETIO.SYS ( NETIO!RtlCopyBufferToMdl+1d )
BUGCHECK_STR: 0xD1
PROCESS_NAME: System
??????????????????????????????????????????????????????????????????????????????????????``

http://www.sevenforums.com/bsod-help-support/312559-random-bsod-driver_irql_not_less_or_equal-netio-sys-ntoskrnl-exe.html
Relevancy 82.13%

Hi there, my colleague is getting random BSOD on his relatively new Dell E6330 with W7 Pro x64.

I have grabbed some dump files and tried to understand them in BlueScreenView, but they don't make a lot of sense to me, but these two items are frequently mentioned: NETIO.SYS \ ntoskrnl.exe.

I also ran Memtest86+ and it came back with no errors.

Please can someone help me translate these dump files (attached)?

Many thanks

A:BSOD random W7 Pro x64, error NETIO.SYS \ ntoskrnl.exe

Welcome to the forum.

Please uninstall Trend Micro and AVG software.Microsoft Security Essentials & the Free version of Malwarebytes, update and make full scans separately:Uninstallers (removal tools) for common antivirus software - ESET Knowledgebase
Help protect your PC with Microsoft Security Essentials
Malwarebytes Free



   Note
Do not start the trial version of MalwareBytes

Also take a look at: Good & Free System Security Combination
Virus Check:Make scans with these tools below:TDSSKiller Rootkit Removal Utility Free Download | Kaspersky Lab US
Online Virus Scanner Eset
Application conflict:Reduce the start-up items. This will help avoid software conflicts:Remove Startup Programs in Windows 7
Clean Startup in Windows 7
System File CheckerThe SFC /SCANNOW Command - System File Checker scans the integrity of all protected Windows 7 system files and replaces incorrect corrupted, changed/modified, or damaged versions with the correct versions if possible. If you have modified your system files as in theming explorer/system files, running sfc /scannow will revert the system files to it's default state.Link to full tutorial: SFC /SCANNOW Command - System File Checker
Run Disk Check in Windows 7Run this on your Hard Drive(s). This will show you how to run Check Disk or chkdsk in Windows 7 to check a selected hard disk for file system errors and bad sectors on it. With both boxes checked for all HDDs and with Automatically fix file system errors. Post back your logs for the checks after finding them using Check Disk (chkdsk) - Read Event Viewer LogLink to full tutorial: Disk Check
Check for heating issues using Speccy or HWmonitorHWMonitor CPUID - System & hardware benchmark, monitoring, reporting
Speccy - System Information - Free DownloadPlease upload a summary tab using Speccy. Screenshots and Files - Upload and Post in Seven Forums
Update these drivers to their latest available.

lmimirr.sys Wed Apr 11 04:32:45 2007 (461C108D)
RemotelyAnywhere Mirror Miniport Driver or LogMeIn Mirror Miniport Driver
Driver Reference Table - lmimirr.sys

PBADRV.sys Tue Jan 8 01:12:13 2008 (4782798D)
PBA Support Driver from Dell
Driver Reference Table - PBADRV.sys

LMIRfsDriver.sys Mon Jul 14 22:26:56 2008 (487B7E50)
RemotelyAnywhere Mirror Miniport Driver or LogMeIn Mirror Miniport Driver
Driver Reference Table - LMIRfsDriver.sys
To perform a clean install of a driver, follow this tutorial:How to Clean Left Over Driver Files with Driver Sweeper

If no updates are available, then remove the software with revo.Revo Uninstaller "Free"Use Revo Uninstaller to uninstall stubborn software. Opt for Advance Mode while uninstalling. This allows you to remove leftover registry entries of the software.Link to download: Download Revo Uninstaller Freeware - Free and Full Download - Uninstall software, remove programs, solve uninstall problems
Keep us posted.


Code:
Built by: 7601.18247.amd64fre.win7sp1_gdr.130828-1532
Debug session time: Sat Oct 26 06:29:20.798 2013 (UTC + 6:00)
System Uptime: 0 days 0:48:35.000
BugCheck C2, {7, 109b, 650067, fffffa80072bc8be}
Probably caused by : NETIO.SYS ( NETIO!FreeCacheEntry+4b )
BUGCHECK_STR: 0xc2_7
PROCESS_NAME: System
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.18247.amd64fre.win7sp1_gdr.130828-1532
Debug session time: Sat Oct 26 04:47:20.481 2013 (UTC + 6:00)
System Uptime: 0 days 2:06:56.683
BugCheck 24, {1904fb, fffff8800931d488, fffff8800931cce0, fffff8000306a980}
Probably caused by : ntkrnlmp.exe ( nt!ExpCheckForIoPriorityBoost+5c )
BUGCHECK_STR: 0x24
PROCESS_NAME: System
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.18247.amd64fre.win7sp1_gdr.130828-1532
Debug session time: Sat Oct 26 02:39:49.095 2013 (UTC + 6:00)
System Uptime: 0 days 6:42:49.907
BugCheck 3B, {c0000005, fffff8000... Read more

http://www.sevenforums.com/bsod-help-support/310864-bsod-random-w7-pro-x64-error-netio-sys-ntoskrnl-exe.html
Relevancy 81.7%

Just after upgrading to Windows 8 x64 I started getting some BSODs while on Windows.

I have already tried to update the LAN driver according to Asus's recommendation, but it didn't helped at all.

EDIT: It usually happens when I'm doing whatever on Windows, but it's quite common if I'm using YouTube on Opera.

A:Random BSODs [+NETIO.sys, afd.sys, tcpip.sys]

Welcome
Your reports hint at hardware, but may also be a driver. Lets start here
Driver Verifier
I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Windows 7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.
Driver Verifier - Enable and Disable

http://www.sevenforums.com/bsod-help-support/248488-random-bsods-netio-sys-afd-sys-tcpip-sys.html
Relevancy 81.7%

Hello I NetIO.sys BSODs Random related to upgraded my system to Windows Ultimate x a month or two Random BSODs related to NetIO.sys ago from Windows XP Pro Ever since the upgrade I have been getting random BSODs that can occur when the system is completely idle while I am at work or while it is busy It does not seem to have any sort of pattern I looked at the dmp files myself and it looks to be related to netio sys although I am by no means an expert at reading dmp files I have tried reinstalling Windows to no avail I also disabled the onboard NIC I was using and started using a PCI Linksys NIC but have the same issue although it seems less frequent now I have tested the memory with memtest no errors and have run a chkdsk r on the system disk for good measure no errors I realize my system is fairly old for Windows around years but it was high-end when I bought it and I have upgraded the processor since then so I believe it should be capable of running the OS I never have any performance issues it is just the BSODs Assistance greatly appreciated

A:Random BSODs related to NetIO.sys

Welcome to the forum. Sorry you are having trouble. I looked at your three most recent dumps. They are virtually identical.

To begin your troubleshooting, I recommend that you uninstall Daemon Tools. It uses a driver, found in your dump, sptd.sys, that is notorious for causing BSODs. Use this SPTD uninstaller when you're done: DuplexSecure - Downloads. Select uninstall; do NOT select reinstall.

Here is a free alternative CD virtualization program that does not use the sptd.sys driver.
Freeware MagicISO Virtual CD/DVD-ROM(MagicDisc) Overview.

You have another almost guaranteed BSOD maker running, Zone Alarm. ZA is a well documented, known cause of BSOD's on many Win 7 systems. Uninstall Zone Alarm completely using this removal tool: http://download.zonealarm.com/bin/fr...cpes_clean.exe. ZA is very likely the reason for seeing netio.sys blamed. Make sure Windows Firewall is turned on.

You have yet another almost guaranteed BSOD maker:




Quote:

Code:
ASACPI.sys Sun Mar 27 22:30:36 2005
The 2005 version of this driver is a known BSOD cause.
Please visit this link: ASUSTeK Computer Inc.-Support- download_item_mkt
Scroll down to the Utilities category, then scroll down to the "ATK0110 driver for WindowsXP/Vista/Windows 7 32&64-bit " (it's about the 8th item down).
Download and install it.
Go to C:\Windows\System32\drivers to check and make sure that the ASACPI.sys file is date stamped from 2009 or 2010 (NOT 2005).


XP software that is not upgraded for Win 7 will not run on a Win 7 system except in the XP mode. You have some out dated drivers loaded on your system including some XP drivers. Out of date drivers can and do cause memory corruption and BSOD's. Update or eliminate the following drivers.





Quote:
nvm62x64.sys Fri Oct 17 17:01:06 2008 - nVidia Ethernet Networking Driver (nForce chipset driver). Drivers - Download NVIDIA Drivers. Update your chipset drivers.

nvraid.sys Wed May 20 02:39:40 2009 - nVidia nForce RAID Driver. Drivers - Download NVIDIA Drivers. Update this driver.

RTKVAC64.SYS Thu Jun 18 15:37:20 2009 - RealTek AC'97 Audio CODECs Driver v.A4.00 for Windows Vista, Windows Vista 64-bit. Realtek. Update this driver.

SaiK0728.sys Fri Jan 18 13:28:04 2008 - Saitek Hid Driver, Download drivers and software for Saitek products. Update this driver or unstall the software. It is XP software.

Si3114r5.sys Fri Nov 21 02:34:37 2008 - Silicon Image driver. Silicon Image - Support. Update the driver or uninstall the software.

SiRemFil.sys Wed Oct 18 18:20:39 2006 - Silicon Image driver. Silicon Image - Support. Update or install this software.

SiWinAcc.sys Mon Nov 01 15:23:29 2004 - Silicon Image driver - comes with package for the SIxxxx drivers. Silicon Image - Support. Update or install this software.







Quote:
- I have listed links to most of the drivers in the code box above. Please use the links there to see what info I've found about those drivers.
- search Google for the name of the driver
- compare the Google results with what's installed on your system to figure out which device/program it belongs to
- visit the web site of the manufacturer of the hardware/program to get the latest drivers (DON'T use Windows Update or the Update driver function of Device Manager).
- if there are difficulties in locating them, post back with questions and someone will try and help you locate the appropriate program.

- - The most common drivers are listed on this page: Driver Reference
- - Driver manufacturer links are on this page: Drivers and Downloads
- - To remove any left over driver remnants, especially from graphics cards, use driver sweeper Guru3D - Driver Sweeper.




After you follow all the above suggestions, reboot and see how your system runs. Update us and let us know. If you get another BSOD, upload it to us and we will go from there.

http://www.sevenforums.com/bsod-help-support/128845-random-bsods-related-netio-sys.html
Relevancy 81.7%

Okay so I've been trying to fix issues with my computer for a good while now Used to be where it'd crash almost every time I tried to do anything Was able to trace it to a power supply issue But a couple weeks later I started getting BSODs again They're random and far less frequent maybe once a day now I've tested my ram by using Memtest by using one stick at a time changing the configuration pointed to BSODs always being with Random netio.sys and even testing them in another person's computer and they always worked fine My temps are usually less then C I've tried updating drivers but I'm not Random BSODs with netio.sys always being pointed to sure if there were any that I missed As the title suggests the BSODs seem random and I'm getting tired of just trying to deal with them I just built this computer in Dec My crash zip from the SF Diag Tools will be uploaded with this post Any help with this issue would be greatly appreciated thank you

A:Random BSODs with netio.sys always being pointed to

Code:
BugCheck D1, {18, 2, 1, fffff8800143ff15}

Probably caused by : NETIO.SYS ( NETIO!StreamClassify+135 )
NETIO.SYS is a Windows I/O Network Subsystem driver, and there is most probably an issue with the network card drivers or a Internet security program which has it's own in-built firewall.

Scan for any missing, modified or corrupted protected Windows files with:SFC /SCANNOW Command - System File Checker
Install and perform full scans with:Malwarebytes : Free anti-malware download
Microsoft Security Essentials | Protect against viruses, spyware, and other malware


   Information
Remember to install the free version of Malwarebytes not the free trail; untick the free trial box during installation. MSE is the most lightweight and compatible with the Windows 7 operating system

You can also view this thread for a complete free and lightweight security protection combination:Good and Free system security combination.
Check for any Windows Updates:

Start > Check for Updates > Install Important/Optional Updates > Reboot (if required)

Update:


Code:
2: kd> lmvm Rt64win7
start end module name
fffff880`056ba000 fffff880`05781000 Rt64win7 (deferred)
Image path: \SystemRoot\system32\DRIVERS\Rt64win7.sys
Image name: Rt64win7.sys
Timestamp: Wed Dec 26 17:17:50 2012 (50DB313E)
CheckSum: 000CDEEE
ImageSize: 000C7000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Realtek

http://www.sevenforums.com/bsod-help-support/284068-random-bsods-netio-sys-always-being-pointed.html
Relevancy 80.84%

Good day

In last few weeks I got about 10-12 BSODs, all pointing to NETIO.SYS. It happening only while playing World of Tanks but totally randomly. Sometimes I can play for few days without it but yesterday 3 in hour. I tested everything - PC was running for 10 hours in OCT + Inter Burn test with no error, 4 hours of memtes - no error. Updated every driver to its newest verision aswell as OS and still happening. Temperatures are OK. In attachment I am posting what WinDbg showing from minidump.

Thank you for help.

A:Random BSODs, everytime caused by netio.sys

Three issues.

1-asacpi.sys
Asacpi.sys

The pre 2009 version of this driver is a known BSOD cause.





Quote:
Please visit this link: Asus tek computer inc. -support- drivers and download p7p55d le

ASUSTeK Computer Inc. -Support- Drivers and Download P7P55D LE
ASUSTeK Computer Inc. - Motherboards- ASUS P5K-VM

Scroll down to the utilities category, then scroll down to the "atk0110 driver for windowsxp/vista/windows 7 32&64-bit" (it's about the 12th item down).

Download and install it.

Go to c:\windows\system32\drivers to check and make sure that the asacpi.sys file is date stamped from 2009 or 2010 (not before).



2-Old drivers needing update.

Code:
ASACPI.sys 3/27/2005 10:30:36 PM
lirsgt.sys 5/17/2009 9:06:57 AM
atksgt.sys 5/17/2009 9:36:34 AM
LHidFilt.Sys 6/17/2009 12:49:39 PM
LMouFilt.Sys 6/17/2009 12:49:43 PM
How To Find Drivers:




Quote:
- search Google for the name of the driver
- compare the Google results with what's installed on your system to figure out which device/program it belongs to
- visit the web site of the manufacturer of the hardware/program to get the latest drivers (DON'T use Windows Update or the Update driver function of Device Manager).
- if there are difficulties in locating them, post back with questions and someone will try and help you locate the appropriate program.


- - The most common drivers are listed on this page: Driver Reference Driver Reference
- - Driver manufacturer links are on this page: Drivers and Downloads

3-Netio.sys. Usually when netio.sys is implicated it is actually the installed malware. In your case ESET. I would remove and replace with Microsoft Security Essentials at least to test.

http://download.eset.com/special/ESETUninstaller.exe

Microsoft Security Essentials - Free Antivirus for Windows

http://www.sevenforums.com/bsod-help-support/226236-random-bsods-everytime-caused-netio-sys.html
Relevancy 79.55%

I'm working on my parents computer and they are randomly receiving BSODs. They tell me they usually receive them when browsing the internet and running several other programs at once. They are using a Dell Studio XPS 7100 running Windows Home Premium.

My guess is that the issue is driver related. The reason I think this is because I ran the driver verifier and it created a BSOD (this also created the last mini dump file in the attached files). The BSOD message said "A device driver attempting to corrupt the system has been caught. The faulty driver currently on the kernel stack must be replaced with a working version."

Would someone mind looking through the attached documents and letting me know if you see any problems?

A:Random BSODs ntoskrnl.exe+26ee0 & ntoskrnl.exe+5063dc

  
Quote: Originally Posted by RossTTU


I'm working on my parents computer and they are randomly receiving BSODs. They tell me they usually receive them when browsing the internet and running several other programs at once. They are using a Dell Studio XPS 7100 running Windows Home Premium.

My guess is that the issue is driver related. The reason I think this is because I ran the driver verifier and it created a BSOD (this also created the last mini dump file in the attached files). The BSOD message said "A device driver attempting to corrupt the system has been caught. The faulty driver currently on the kernel stack must be replaced with a working version."

Would someone mind looking through the attached documents and letting me know if you see any problems?


The verified crash was related to C:\Program Files (x86)\Lavasoft\Ad-Aware\KernExplorer64.sys

I would remove Ad-aware AT LEAST TO TEST

http://www.sevenforums.com/bsod-help-support/217564-random-bsods-ntoskrnl-exe-26ee0-ntoskrnl-exe-5063dc.html
Relevancy 78.69%

The 3 crashes included were before I:
-updated Realtek HD audio drivers
-disabled the AMD HD audio driver
-turned HD sleep to never
-updated video driver

System has been running with no issue since Sept 2011 up until July 2012. I've already done a repair install so I don't not have all the dump files unfortunately from last month .

I've had no issues in the last day, but prior to the repair install I could get a week or so of the system running before it would crash. Because the crashes were so random before I can't really know if something is wrong still.

The first crash was when I tried to use disk cleaner to remove windows.old folder.
The other 2 were when system was idle, I've never had an actual crash while using the system or gaming.

I just wanted experts to look at it to see if they see anything that stands out.

Thanks

A:BSOD - fileinfo.sys and ntoskrnl.exe

I was able to complete removal of windows.old without a BSOD. If I can get 2 weeks of stability I'll consider it solved.

http://www.sevenforums.com/bsod-help-support/247446-bsod-fileinfo-sys-ntoskrnl-exe.html
Relevancy 73.53%

Hi!

For some time now I had this problem where PC bsods in random times, doing something or being idle..
Error codes are:
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
SYSTEM_SERVICE_EXCEPTION
MEMORY_MANAGEMENT
KMODE_EXCEPTION_NOT_HANDLED
PFN_LIST_CORRUPT
KMODE_EXCEPTION_NOT_HANDLED

When looking with Nirsofts Bluescreenviewer they are all coming from ntoskrnl.exe

I did two passes with memtest86+ and no errors was found.
I had some problems with my secondary HDD having some bad sectors, but I fixed those (I think) when I was clean installing new system few months ago. Could HDD be causing this problem? Widows and more important programs are installed on a new SSD, HDD used almost only for storage, games and stuff not used all the time..

Please help me solve this problem!

Thanks!

A:ntoskrnl.exe random bsods

Update drivers highlighted in red, MS AHCI Storport Miniport Driver and Samsung RAPID Mode Disk Filter driver

Code:
LGVirHid.sys Tue Nov 24 02:36:48 2009 (4B0B38B0)
Logitech Gamepanel Virtual HID Device Driver
http://www.carrona.org/drivers/driver.php?id=LGVirHid.sys

LGBusEnum.sys Tue Nov 24 02:36:48 2009 (4B0B38B0)
Logitech Keyboard
http://www.carrona.org/drivers/driver.php?id=LGBusEnum.sys

netr7364.sys Tue Oct 4 08:14:37 2011 (4E8AA44D)
Ralink RT2501/RT2573/T2601/RT2671 Wireless Adapter (you may have a different manufacturer)
http://www.carrona.org/drivers/driver.php?id=netr7364.sys

k57nd60a.sys Wed Jan 30 01:48:55 2013 (51086DF7)
Broadcom NetLink Gigabit Ethernet NDIS6.x Unified Driver
http://www.carrona.org/drivers/driver.php?id=k57nd60a.sys

LGSHidFilt.Sys Thu May 30 17:16:33 2013 (51A76D51)
Logitech Gaming KMDF HID driver[br]KB or mouse
http://www.carrona.org/drivers/driver.php?id=LGSHidFilt.Sys

eamonm.sys Mon Jul 8 14:34:13 2013 (51DAB1C5)
ESET Amon driver
http://www.carrona.org/drivers/driver.php?id=eamonm.sys

edevmon.sys Mon Jul 8 14:34:14 2013 (51DAB1C6)
ESET Smart Security Devmon Monitor driver
http://www.carrona.org/drivers/driver.php?id=edevmon.sys

ehdrv.sys Mon Jul 8 14:34:32 2013 (51DAB1D8)
ESET
http://www.carrona.org/drivers/driver.php?id=ehdrv.sys

EpfwLWF.sys Mon Jul 8 14:35:35 2013 (51DAB217)
ESET ESS/NOD32 driver
http://www.carrona.org/drivers/driver.php?id=EpfwLWF.sys

epfwwfp.sys Mon Jul 8 14:35:36 2013 (51DAB218)
ESET Personal Firewall Driver
http://www.carrona.org/drivers/driver.php?id=epfwwfp.sys

epfw.sys Mon Jul 8 14:35:43 2013 (51DAB21F)
ESET
http://www.carrona.org/drivers/driver.php?id=epfw.sys

dump_storahci.sys Thu Aug 22 13:40:39 2013 (5215F8B7)
driver created to provide disk access during crash dump file generation
http://www.carrona.org/drivers/driver.php?id=dump_storahci.sys

AODDriver2.sys Tue Feb 11 12:06:52 2014 (52FA044C)
AMD Overdrive; also in EasyTune6 for Gigabyte motherboard [br] Known BSOD issues in Win7[br][br]Part of AMD Fuel[br][br]Location: C:\Program Files\ATI Technologies\ATI.ACE\Fuel\amd64\AODDriver2.sys
http://www.carrona.org/drivers/driver.php?id=AODDriver2.sys

AMDACPKSL.SYS Wed Mar 12 00:49:44 2014 (531FA118)
included in the AMD/ATI Catalyst WDM drivers package
http://www.carrona.org/drivers/driver.php?id=AMDACPKSL.SYS

AtihdWB6.sys Wed Mar 12 00:50:02 2014 (531FA12A)
AMD High Definition Audio Function Driver
http://www.carrona.org/drivers/driver.php?id=AtihdWB6.sys

atikmpag.sys Fri Apr 18 03:07:07 2014 (53507ABB)
ATI Video driver (remove the Catalyst Control Center and only install the Display Driver)
http://www.carrona.org/drivers/driver.php?id=atikmpag.sys

atikmdag.sys Fri Apr 18 04:13:16 2014 (53508A3C)
ATI Video driver (remove the Catalyst Control Center and only install the Display Driver)
http://www.carrona.org/drivers/driver.php?id=atikmdag.sys

em006_64.dat Wed May 14 11:19:40 2014 (5373352C)
ESET Smart Security
http://www.carrona.org/drivers/driver.php?id=em006_64.dat

SamsungRapidDiskFltr.sys Mon May 19 16:24:16 2014 (537A1410)
Samsung RAPID Mode Disk Filter driver
http://www.carrona.org/drivers/driver.php?id=SamsungRapidDiskFltr.sys

SamsungRapidFSFltr.sys Mon May 19 16:24:18 2014 (537A1412)
Samsung RAPID Mode File Filter driver
http://www.carrona.org/drivers/driver.php?id=SamsungRapidFSFltr.sys

SCDEmu.SYS Fri Jun 27 07:14:20 2014 (53ACFDAC)

SCDEmu.SYS - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

em018_64.dat Mon Sep 29 15:24:22 2014 (54295D86)
ESET Smart Security
http://www.carrona.org/drivers/driver.php?id=em018_64.dat

em008_64.dat Mon Oct 6 16:15:50 2014 (5432A416)
ESET Smart Security
http://www.carrona.org/drivers/driver.php?id=em008_64.dat

Debug session time: Sat Nov 15 17:37:57.453 2014 (UTC + 1:00)
Loading Dump File [C:\Users\Mihael\Sysnati... Read more

http://www.eightforums.com/bsod-crashes-debugging/57137-ntoskrnl-exe-random-bsods.html
Relevancy 73.53%

Thanks for reading and trying to help ntoskrnl.exe BSODs Random me solve this issue I've had this problem since I first built this machine about years ago been getting random BSODs as the title suggests Sometimes I can go a week without any errors then I'll get one each day for days in a row About months ago after countless google Random BSODs ntoskrnl.exe searches for a solution I decided to just reformat my hard drive Alas this was no help As to the symptoms I USUALLY get one of these BSODs when gaming It has happened during all the games I play so I can't nail down only one as the culprit I play WoW battlefield apb reloaded and league of legends The crash address for every BSOD thus far is ntoskrnl exe cc I'm running Windows Home Premium bit OEM reinstalled Age of hardware is slightly over years age of OS install slightly over months I believe I've followed the BSOD posting instructions pretty well if you need any more info I'd be happy to provide it Thanks in advance

A:Random BSODs ntoskrnl.exe

All of these seem to be crashes of the directx subsystem or wake event failures from win32k.sys (timeout or synchronization object failures), all of which would indicate likely video card or driver trouble. Assuming you've tried multiple ATI driver versions with no success, have you considered this potentially a hardware fault (faulty video card) or a low power scenario (underpowered or failing PSU)?

http://www.sevenforums.com/bsod-help-support/195648-random-bsods-ntoskrnl-exe.html
Relevancy 73.53%

Hey

For a few days ive been getting blue screens pretty much everytime i start to play something or watch movies. Ive had this problem before but then it just suddently pretty much fixed itself. Doesnt usually happen while just browsing internet.
Would appreciate if someone could check the logs,

A:Win 7 x64, Random BSODs, ntoskrnl.exe mostly

Ran memtest and found some errors on 2 diff sticks, third stick passed. Pc was working fine for several hours but then got the "display driver has stopped responding..." error twice and bsod soon after that. Updated some drivers and installed all windows updates. Updated SF log,

http://www.sevenforums.com/bsod-help-support/338865-win-7-x64-random-bsods-ntoskrnl-exe-mostly.html
Relevancy 73.53%

My friend has a Desktop PC that has some random BSODs and I decide to help him.
Started on January and getting worse last month.
After the forth BSOD I tried to find out the problem but it seems the problem not really exact. (Run WinDbg, got different results)
Then I reinstalled motherboard, video card, wlan and the lan drivers. Run chkdsk and system file checker (src /scannow), found nothing. Checked the SSD firmware, up to date.
Run stress test on the CPU and the GPU, there weren't overheating (at that time).
Tested the RAMs using memtest86+ overnight, passed 5 times, no errors.
Run Driver Verifier for 17 hours, no BSOD. After deleted the existing settings, restarting the windows caused BSOD (5th).
Uninstalled Gigabyte Dynamic Energy Saver and manually disabled the gdrv.sys using Autoruns. But this seems only the last BSOD (or not).

I was wondering if somebody could help.
Thank you in advance.

A:Random different BSODs, ntoskrnl.exe

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck C1, {fffff9807ec22ff0, fffff9807ec22ffc, 7d000c, 24}

Unable to load image \??\C:\Windows\gdrv.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for gdrv.sys
*** ERROR: Module load completed but symbols could not be loaded for gdrv.sys
Probably caused by : gdrv.sys ( gdrv+30c7 )

Followup: MachineOwner
---------

Code:
Loaded symbol image file: gdrv.sys
Image path: \??\C:\Windows\gdrv.sys
Image name: gdrv.sys
Timestamp: Fri Mar 13 10:22:29 2009 (49B9D175) 2009 (49B9D175)
the driver's very old...should update those
GIGABYTE
EDIT:
if you are planniing to uninstall that anyway, just uninstall it as it's one of the cause of BSOD...


Code:
Start Menu\Programs\Norton Internet Security Public:Start Menu\Programs\Norton Internet Security Public
also, it's recommended that you uninstall Norton and use MSE instead

Antivirus Uninstaller
Microsoft Security Essentials | Protect against viruses, spyware, and other malware

run chkdisk /f /r to search for drive corruption, and sfc /scannow to scan for corrupted windows system file
Cheers

http://www.sevenforums.com/bsod-help-support/289447-random-different-bsods-ntoskrnl-exe.html
Relevancy 73.53%

Hey there, this my first time here. And sorry if BSOD of this type already have already been fixed.
These bsods started appearing out of nowhere. I have no idea what is the cause. They usually appear when I am playing games or watching youtube videos. But they appear when the PC is idle too.
I have attached the dm log collector files. I hope you will help me fix this problem.
Thanks.

http://www.tenforums.com/bsod-crashes-debugging/45166-random-bsods-ntoskrnl-exe.html
Relevancy 73.53%

Hi Through out the day I have received a few BSOD Stop errors as follows Firstly I received a BUGCODE USB DRIVER fe error indicating usbhub sys being the culprit this isn't the first time I received this particular error Only with Random BSODs ntoskrnl.exe different thing using the usb port at that time was my wireless microsoft mouse Code - - dmp AM BUGCODE USB DRIVER x fe fffffa ecf usbhub sys usbhub sys a c x ntoskrnl exe I BSOD Investigation - - dmp AM Shutting down later that day I received a DRIVER POWER STATE f error which blamed ntoskrnl exe as the culprit Code - - dmp PM DRIVER POWER STATE FAILURE x f fffffa f fffff b a d fffffa bb ntoskrnl exe ntoskrnl exe x ntoskrnl exe I BSOD Investigation - - Random different BSODs with ntoskrnl.exe dmp PM Later on for testing purposes attempted to run verifier and received lots of DRIVER VERIFIER DETECTED VIOLATION c error on both restarts before disabling verifier from safe mode First C Error Code - - dmp PM Random different BSODs with ntoskrnl.exe DRIVER VERIFIER DETECTED VIOLATION x c tcpipreg sys tcpipreg sys a x ntoskrnl exe I BSOD Investigation - - dmp PM Second C Error Code - - dmp PM DRIVER VERIFIER DETECTED VIOLATION Random different BSODs with ntoskrnl.exe x c fffffa d be fffffa a d nvlddmkm sys nvlddmkm sys x ntoskrnl exe I BSOD Investigation - - dmp PM I used blue screen view to analyse and found that ntoskrnl exe seem to be present in almost all of the recent BSODs I received Ran System File Checker on that file and it indicated that it checked out fine Ran Windows Memory Diagnostic and came back clean Any help with this error would be appreciated Offending Computer Specifications Toshiba P PSAY A- L Laptop Running Windows x GB Ram Intel i - QM running at GHz Intel GB SSD

A:Random different BSODs with ntoskrnl.exe

Blue Screen of Death (BSOD) Posting Instructions

http://www.sevenforums.com/bsod-help-support/394673-random-different-bsods-ntoskrnl-exe.html
Relevancy 72.67%

Hi it's been barely a few days since I've gotten my laptop back from repair from Acer and already I'm blue screening again I've been having BSOD problems for a while and couldn't figure it out I checked my hard disk for errors tested my RAM for errors scanned my laptop nothing So I called Acer and they had me do a complete restore which ultimately ended in failure with to srvnet.sys)? due Random (ntoskrnl.exe, BSODs my laptop having no OS so I had to send it in Long story short I get my laptop back and then last night while watching a tv show online my laptop blue screens then restarts with no problem This morning while starting up Random BSODs due to (ntoskrnl.exe, srvnet.sys)? my laptop blue screens again and now its fine It's completely random As a side note I DID install new RAM on my laptop as soon as I first bought it - months ago but the blue screening didn't start until around month ago so I don't think it has to do with that correct me if I'm wrong I've also installed bluescreenview and this is what it said Dump File - - dmp Crash Time AM Bug Check String SYSTEM THREAD EXCEPTION NOT HANDLED Bug Check Code x e Parameter ffffffff c Parameter fffff be Parameter fffff a Parameter fffff a da Caused By Driver srvnet sys Caused By Address srvnet sys File Description Product Name Company File Version Processor x Crash Address srvnet sys c be Stack Address Stack Address Stack Address Computer Name Full Random BSODs due to (ntoskrnl.exe, srvnet.sys)? Path C Windows Minidump - - dmp Processors Count Major Version Minor Random BSODs due to (ntoskrnl.exe, srvnet.sys)? Version Dump File Size Dump File - - dmp Crash Time AM Bug Check String MEMORY MANAGEMENT Bug Check Code x a Parameter Parameter fffff ff Parameter af dd Parameter fffffa a Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe f c File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win sp gdr - Processor x Crash Address ntoskrnl exe f c Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size I have no idea what to do with this as I'm not much of a tech guy so please try to bear with me and help me out as much as you can I've also attached my minidumps I'm pretty sure they're my minidumps Thanks

A:Random BSODs due to (ntoskrnl.exe, srvnet.sys)?

Sorry, here are the files that are needed according to jcgriff2's thread. I didn't see it until it after i posted my thread.

Update: Before submitting this thread my laptop froze up for a second then restarted, no blue screen.

http://www.techsupportforum.com/forums/f299/random-bsods-due-to-ntoskrnl-exe-srvnet-sys-662714.html
Relevancy 72.67%

Hi,

Bought a new computer a month ago, since then I've been having random BSODs from time to time, all related to the following: ntoskrnl.exe
Done fresh windows install twice, those BSODs keep coming after a while.
Recently updated bios, no results.
Already done some hardware tests, such as:

memtest86: running over 9 hours, no errors.
seatool: Seagate's HDD check, passed.
furmark: stressing the GPU, no problems.

I'm running Driver Verifier in the background, got 3 BSODs since that.
Razer DeathAdder mouse driver wouldn't let me go into Windows while being stressed by verifier (blue screen), so that's the only no-Microsoft driver that is not being stressed at the moment.
(Updated that driver too, the same happened)

Tried to analyse the .dmp files, but I guess I wasn't able to understand those.

Hope you guys could help me, as I've had enough trying to solve this by myself.

Thanks in advance!

A:Random BSODs on a brand-new PC (ntoskrnl.exe)

Hello rslembo, disable driver now, and test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

Uninstall BitDefender. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.
Download, install and update those, and then run full system scans with both of them, one by one.

Let us know the results.

http://www.sevenforums.com/bsod-help-support/276072-random-bsods-brand-new-pc-ntoskrnl-exe.html
Relevancy 72.67%

Hi guys.
My problem started when I had Windows 8.1 installed. I got several different random BSODs every day.
I think it all started on the day I got my HDD replaced with SSD. But I may be wrong.
I was hoping that updating to Windows 10 will solve that issue but it didn't.

Any help will be appreciated.

A:Several random BSODs on my laptop. ntoskrnl.exe and other

Hi Mariocorn,

I have checked the log files again and see that you're running a counterfeit copy of windows, this is not allowed.

Please create a new thread when you have a legitimate copy of windows.

http://www.eightforums.com/bsod-crashes-debugging/70346-several-random-bsods-my-laptop-ntoskrnl-exe-other.html
Relevancy 72.67%

My grandmother has bought a HP p2-1113w with windows 7 home premium x64. It's only a few months old and has crashed 8+ times with the same error, IRQL_NOT_LESS_OR_EQUAL indicating ntoskrnl.exe+7e569

I'm using the computer to teach my grandmother how to use the internet, make word documents, etc. No games (she doesn't even know how to play minesweeper) and the only videos she watches are Antiques Roadshow, but, the BSODs started pretty much right away, even before we started.

As far as I'm aware all drivers are up to date, and all windows updates have been installed.

I've attached the minidump file/s created by SF diagnostic tool.

A:Random BSODs. Seems to be ntoskrnl.exe+7e569.

Welcome to SF.

Please upload your msinfo32.nfo file. To get this: Start Menu -> Type msinfo32 into the Search programs and files box -> When it opens, go to File, Save -> Save as msinfo32.nfo and save in a place you will remember -> Let it finish the process of gathering and saving the system info -> Right click the .nfo file, click send to compressed (zipped) folder -> Upload the .zip file here.

Please upload your msinfo32.txt file. To get this: Start Menu -> Type msinfo32 into the Search programs and files box -> When it opens, go to File, Export -> Save as msinfo32.txt and save in a place you will remember -> Let it finish the process of gathering and saving the system info -> Right click the .txt file, click send to compressed (zipped) folder -> Upload the .zip file here.

The BSOD was caused by older Netgear Neutral Wireless Solution drivers.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {0, 2, 1, fffff80002a9dd2c}

*** WARNING: Unable to verify timestamp for scmndisp.sys
*** ERROR: Module load completed but symbols could not be loaded for scmndisp.sys
Probably caused by : scmndisp.sys ( scmndisp+16d1 )

Followup: MachineOwner
---------
0: kd> lmvm scmndisp
start end module name
fffff880`0189e000 fffff880`018a8000 scmndisp T (no symbols)
Loaded symbol image file: scmndisp.sys
Image path: scmndisp.sys
Image name: scmndisp.sys
Timestamp: Fri May 27 16:30:22 2011 (4DDF7D3E)
CheckSum: 00009C0C
ImageSize: 0000A000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Click on the Start ► Control Panel ► Programs ► Uninstall a program ► Uninstall everything related to; Netgear Neutral Wireless Solution and restart the system. Delete remnants of its drivers/older drivers using Driver Fusion/Sweeper

Get latest drivers from: Driver Reference Table

Post back results.

http://www.sevenforums.com/bsod-help-support/267839-random-bsods-seems-ntoskrnl-exe-7e569.html
Relevancy 72.67%

Hi Guys,

I'm getting random blue screens on my Win7 64 system. They don't specifically occur under load (ie games). My system might stay up for a day, then blue screen. It's getting a bit annoying

Mini-dumps etc attached. Cheers!

A:Random BSODs ntoskrnl.exe+75c00

please post the following here before we begin, DO NOT start a new thread: Windows Genuine and Activation Issue Posting Instructions

http://www.sevenforums.com/bsod-help-support/289336-random-bsods-ntoskrnl-exe-75c00.html
Relevancy 72.67%

Hi I am constantly having crashes to the BSOD at random intervals My computer had been working fine until a couple of weeks or so ago when I started having BSODs left and right After getting frustrated I reinstalled windows in the hopes of removing whatever might have been the problem but the BSODs have started up again It happens with the greatest frequency when playing games but it also has occurred while installing things and a few times when I wasn't doing anything at all I've been using BlueScreenView to try and figure out the reason for the BSODs and typically it says the crashes were caused by ntoskrnl exe I don't have Service Pack because I got a BSOD while downloading it via Windows Random BSODs, ntoskrnl.exe related Update and now the download can't seem to get past Some of the dumps were created when I had driver verifier on Random BSODs, ntoskrnl.exe related I turned verifier on after getting numerous BSODs even after reinstalling windows and using DriverFinder to make sure my drivers were all accounted for I had to turn the verifier off because i could barely use my computer due to it causing BSODs in like minutes or whatever I did run Memtest before I reinstalled Windows and there were no reported errors and I'm pretty sure i've used Windows' chkdisk on all my drives so at the moment I have no idea what's wrong I even cleaned the dust out of my computer to make sure it wasn't just overheating but it seems like that didn't help I will follow the instructions on memory and hard disk diagnostic checks and post my results when I finish PC SPECS OS - Windows Professional -bit There was no OS on the system when I got it I ordered the computer from CyberPower without a copy of Windows because I already owned one Currently I'm using the upgrade version of Windows Professional purchased as a digital download from the Microsoft store online When I got my computer I first installed a disc version of Windows XP I got when I purchased one of my previous computers then upgraded it to Windows using a disc burned with an iso of my copy of windows Due to the crashes I recently reinstalled Windows probably around a week ago but am still getting BSODs CPU Intel Core i Memory Gb x GB DDR MHz GPU NVIDIA GeForce GTX Motherboard GIGABYTE GA-X A-UD R Rev Power Supply Corsair CMPSU- HX W

A:Random BSODs, ntoskrnl.exe related

Hi Welcome to TSF

Looking at your mini dump files here what I have found


Quote:




Image name: Wdf01000.sys
Timestamp: Mon Jul 13 16:22:07 2009 (4A5BC19F)
Image name: gdrv.sys
Timestamp: Thu Mar 12 20:22:29 2009 (49B9D175)




Driver Reference Table
(is your computer overclocked?) if so please STOP! and revert your motherboard to factory settings
Download all latest drivers for your motherboard from Gigabyte's website Install those drivers while you are in safe mode in windows
Reboot after each driver install and keep going into Safe mode

You can use another computer to download the Service pack for windows 7 from here
Download: Windows 7 and Windows Server 2008 R2 Service Pack 1 (KB976932) - Microsoft Download Center - Download Details
transfer it to that computer with USB or DVD media
If you have Easy Tune installed please Uninstall Easy Tune 6

http://www.techsupportforum.com/forums/f299/random-bsods-ntoskrnl-exe-related-657702.html
Relevancy 72.67%

I've had my computer for about - years and just recently I have been getting random BSODs sometimes when playing games but also on other times just when browsing the web or opening closing programs I've already replaced my HD and did a Clean install of Windows I also replaced video card and did memtest as well but I'm still getting BSODs Sometimes I will get BSOD more than once a day other times not for a couple of days it's really intermittant I found a program called WhoCrashed which analyse crash dump settings and it was somewhat helpful with the errors and google searching and I tried some of the suggestions during the search I found but it didn't really seem to help besides what I already tried The dmp files that were found with the SF Diagnostic Tool were only from about the past month or so since I reinstalled Win Lately I have been getting ntoskrnl exe with either SYSTEM SERVICE EXCEPTION with so day Random once about a ntoskrnl.exe or tcpip.sys. BSODs and or IRQL NOT LESS OR EQUAL but before I was getting PAGE FAULT IN NONPAGED AREA I also got a BSOD on tcpip sys Any Random BSODs about once a day or so with ntoskrnl.exe and tcpip.sys. help would Random BSODs about once a day or so with ntoskrnl.exe and tcpip.sys. be appreciated this is driving me nuts Thanks

A:Random BSODs about once a day or so with ntoskrnl.exe and tcpip.sys.

Welcome to SevenForums.

You need to reinstall the drivers for MotioninJoy simulate Xbox 360 controller (virtual Xinput device). Click on the Start ► Control Panel ► Programs ► Uninstall a program ► Uninstall everything related to that program. Delete remnants of its drivers/older drivers using Driver Fusion/Sweeper and install the latest from here.

Avast! antivirus can contribute in BSOD-s. PLease uninstall and use Microsoft security essentials (TO TEST).avast! Uninstall Utility | Download aswClear for avast! Removal
Recommended antivirus program for Windows 7 based on stability compared to others:-
Microsoft Security Essentials - Free Antivirus for Windows
Malwarebytes - The Free version
Good and Free system security combination.
Do not start the free trial of Malware Bytes; remember to deselect that option when prompted.

Run a full scan with both (separately) once downloaded, installed and updated.

Run the System File Checker that scans the of all protected Windows 7 system files and replaces incorrect corrupted, changed/modified, or damaged versions with the correct versions if possible:
Click on the
Type CMD on Search
Left click and Run as Administrator
Type SFC /scannow
Full tutorial here:SFC /SCANNOW Command - System File Checker
Run Disk Check on your hard disk for file system errors and bad sectors on it:Disk Check
Free up the start-up, nothing except the antivirus is usually needed.Startup Programs - Change
Troubleshoot Application Conflicts by Performing a Clean Startup
*Update your network card drivers.Let us know if there are any improvements or not.

Then take memtest. Run for 8 passes and test each stick in a know good slot for an additional 6 passes.
RAM - Test with Memtest86+
Guide to using Memtest86+ - Geeks to Go Forums






Quote:
The goal is to test all the RAM sticks and all the motherboard slots.

Check your motherboard manual to ensure the RAM sticks are in the recommended motherboard slots. Some motherboards have very specific slots required for the number of RAM sticks installed.

If you get errors, stop the test and continue with the next step.

1. Remove all but one stick of RAM from your computer (this will be RAM stick #1), and run Memtest86 again, for 7 passes.
Be sure to note the RAM stick, use a piece of tape with a number, and note the motherboard slot.
If this stick passes the test then go to step #3.

2. If RAM stick #1 has errors, repeat the test with RAM stick #2 in the same motherboard slot.
If RAM stick #2 passes, this indicates that RAM stick #1 may be bad. If you want to be absolutely sure, re-test RAM stick #1 in another known good slot.
If RAM stick #2 has errors, this indicates another possible bad RAM stick, a possible motherboard slot failure or inadequate settings.
3. Test the next stick of RAM (stick #2) in the next motherboard slot.
If this RAM stick has errors repeat step #2 using a known good stick if possible, or another stick.
If this RAM stick has no errors and both sticks failed in slot#1, test RAM stick #1 in this slot.
4. If you find a stick that passes the test, test it in all the other motherboard slots.

If Part 2 testing shows errors, and all tests in Part 3 show errors, you will need to test the RAM sticks in another computer and/or test other RAM in your computer to identify the problem.

In this way, you can identify whether it is a bad stick of RAM, a bad motherboard, or incompatibility between the sticks.


Errors are sometimes found after 8 passes.
Do this test overnight, before going to bed.

http://www.sevenforums.com/bsod-help-support/266328-random-bsods-about-once-day-so-ntoskrnl-exe-tcpip-sys.html
Relevancy 72.67%

Of the past week or so I've had quite a few BSODs with no obvious cause I could be playing various games Star Wars The Old Republic and Lord of the Rings Online being my most frequently used or just browsing the web in Firefox Could be watching videos listening to music editing text Could be completely idle Could happen immediately after a cold boot after hours of cooldown time Could happen after hours of use I suspected it might have been related to pci.sys BSODS / hal.dll cause. ntoskrnl.exe no random, at / obvious the most recent NVIDIA drivers or a Zonealarm upgrade I cleaned and reinstalled both - and reverted to a slightly older and more stable NVIDIA driver It's still happening Looking over crashdumps in bluescreenview would seem to indicate that the BSODS at random, no obvious cause. hal.dll / ntoskrnl.exe / pci.sys offending files are usually a combination of hal dll ntoskrnl exe and pci sys but I'm really not sure what to make of it all I would appreciate some help If further information is required just let me know Thanks everybody

A:BSODS at random, no obvious cause. hal.dll / ntoskrnl.exe / pci.sys

Hello starschwar and welcome to 7 Forums!

Most of the BSODs are of the BugCheck code 0x124 which indicates that a fatal hardware error has occurred. All of the 0x124 specific BSODs pointed towards that you have a problem with the PCI slots.

I went to the Alienware Area-51 R2 Support download page and noticed that you are running a very outdated BIOS which I've highlighted in blue below:


Code:
Version: A01
Date: 10 Jan 2014

Version: A08
Date: 01 Aug 2016
I would recommend that you update it, as it may solve your issue but you also mention that you had installed outdated drivers for your graphics card and that might also fuel the fire so to say, so please head on over to the Dell Support page:

Alienware Area-51 R2

There were also a couple of BSODs complaining about ndis.sys, and for that I would recommend that you:

Run SFC /SCANNOW Command - System File Checker up to three times to fix all errors with a restart in between each. Post back if it continues to show errors after a fourth run or if the first run comes back with no integrity violations.

Cheers, Boris

http://www.sevenforums.com/bsod-help-support/400529-bsods-random-no-obvious-cause-hal-dll-ntoskrnl-exe-pci-sys.html
Relevancy 72.67%

Hi all,

3 weeks ago I did a fresh install of Windows 10 and since then I'm getting BSODs at least once every 1-2 hours. These BSODs vary from SYSTEM_SERVICE_EXCEPTION, IRQL_NOT_LESS_OR_EQUAL, SYSTEM_THREAD_EXCEPTION_NOT_HANDLED to KMODE_EXCEPTION_NOT_HANDLED. Also these BSODs happen at random moment: when the computer is iddling, when I'm downloading, when I'm listening to music, when I'm playing Battlefield 4.

I've already updated all drivers, but now I'm at a point that I don't know anymore what could be causing these BSODs. So I hope you guys could help me find out what the problem is and how to resolve it.

Thanks in advance.

Kind regards,
Jens

http://www.tenforums.com/bsod-crashes-debugging/60321-random-bsods-caused-ntoskrnl-exe.html
Relevancy 72.67%

So over the past days my computer has blue screened about times yet I'm never there to witness it computer I BSODs Random am currently at the ntoskrnl.exe if not it always crashes if I leave it alone for minutes Random ntoskrnl.exe BSODs if I am not currently at the computer to go get food or finish up something around the house Last time it crashed I decided I'd stop using my computer and watch it to see what may have caused it and what I noticed was that all of my PC's services started crashing one by one until the BSOD sometimes the audio service will crash will I'm currently using the PC I used WhoCrashed which says the error is CRITICAL OBJECT TERMINATION bugcheck xF x xFFFFFA B E B xFFFFFA B E E xFFFFF F It's not hardware related just drivers I recently got a new HDD so I formatted and did everything exactly how I used to I honestly have no idea which driver could be at fault My diagnostic files are located here If you guys need any more information I'll be here P EDIT I forgot to add I don't know if this is related but if I attempt launching services msc my entire computer hangs until it crashes minutes later

A:Random ntoskrnl.exe BSODs if I am not currently at the computer

Welcome aboard!

Three of your dumps show this:

Code:
.....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck F4, {3, fffffa800b4e49e0, fffffa800b4e4cc0, fffff80002f75720}

Probably caused by : csrss.exe

Followup: MachineOwner
---------
We may start with SFC /SCANNOW Command - System File Checker here.

But one dump shows this.


Code:

......
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck C000021A, {fffff8a00fdcb320, ffffffffc0000006, 77804e8f, d2da50}

Probably caused by : ntkrnlmp.exe ( nt!ExpSystemErrorHandler2+5e1 )

Followup: MachineOwner
---------

3: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

WINLOGON_FATAL_ERROR (c000021a)
The Winlogon process terminated unexpectedly.
Arguments:
Arg1: fffff8a00fdcb320, String that identifies the problem.
Arg2: ffffffffc0000006, Error Code.
Arg3: 0000000077804e8f
Arg4: 0000000000d2da50

Debugging Details:
------------------


ERROR_CODE: (NTSTATUS) 0xc000021a - {Fatal System Error} The %hs system process terminated unexpectedly with a status of 0x%08x (0x%08x 0x%08x). The system has been shut down.

EXCEPTION_CODE: (NTSTATUS) 0xc000021a - {Fatal System Error} The %hs system process terminated unexpectedly with a status of 0x%08x (0x%08x 0x%08x). The system has been shut down.

EXCEPTION_PARAMETER1: fffff8a00fdcb320

EXCEPTION_PARAMETER2: ffffffffc0000006

EXCEPTION_PARAMETER3: 0000000077804e8f

EXCEPTION_PARAMETER4: d2da50

ADDITIONAL_DEBUG_TEXT: Windows SubSystem

BUGCHECK_STR: 0xc000021a_csrss.exe_c0000006

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

PROCESS_NAME: csrss.exe

CURRENT_IRQL: 0

LAST_CONTROL_TRANSFER: from fffff8000312ad6e to fffff80002cce040
Usual causes of BugCheck C000021A: User-mode device driver, system service, or third-party application, Mismatched system files.

First let us see the user mode device drivers.
Audio:
AMD High Definition Audio Device : needs to be updated
Bluetooth Audio Device (Manufacturer: Atheros Communications) needs to be updated
Display: ATI Radeon HD 5800 Series : seems to be up to date
Network:
Intel(R) 82579V Gigabit Network Connection : needs to be updated
Bluetooth Device (Personal Area Network) Adapter Type Ethernet 802.3 : must be updated.

Within your system services, dont allow the Bluetooth and the Catalyst Control Center to run.

Among the third program, I am not seeing anything that bad other than Catalyst Control Center and Asus AI Suite II. Better you remove these.

Another thing: Enabling Driver Verifier sometimes are very helpful. You may take a chance, too!
Driver Verifier - Enable and Disable

Post back wit... Read more

http://www.sevenforums.com/bsod-help-support/251930-random-ntoskrnl-exe-bsods-if-i-am-not-currently-computer.html
Relevancy 72.67%

I got a new laptop ASUS N Random caused by BSODs ntoskrnl.exe VB which I formatted and installed a fresh copy of Windows on I installed the drivers and OS updates and started experiencing these BSODs caused by ntoskrnl exe So I thought something was wrong with my install and reformatted and did Random BSODs caused by ntoskrnl.exe it all again It didn't help I experienced the first BSOD again with the same message WhoCrashed analysed the crash dumps and listed this Code On Mon PM GMT your computer crashed crash dump file C Windows Minidump - - dmp This was probably caused by the following module ntoskrnl exe nt x C Bugcheck code x F x xFFFFFA F A xFFFFF D xFFFFFA B Error DRIVER POWER STATE FAILURE file path C Windows Random BSODs caused by ntoskrnl.exe system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System Bug check description This bug check indicates that the driver is in an inconsistent or invalid power state This appears to be a typical software driver bug and is not likely to be caused by a hardware problem The crash took place in the Windows kernel Possibly this problem is caused by another driver that cannot be Random BSODs caused by ntoskrnl.exe identified at this time On Mon PM GMT your computer crashed crash dump file C Windows memory dmp This was probably caused by the following module ntkrnlmp exe nt KeBugCheckEx x Bugcheck code x F x xFFFFFA F A xFFFFF D xFFFFFA B Error DRIVER POWER STATE FAILURE Bug check description This bug check indicates that the driver is in an inconsistent or invalid power state This appears to be a typical software driver bug and is not likely to be caused by a hardware problem The crash took place in the Windows kernel Possibly this problem is caused by another driver that cannot be identified at this time I've attached the file from the SF Analytic Tool as well I read a few posts here and read about the RAM being bad I really hope that's not the case since this is a brand new laptop Many thanks for anyone who helps me out Edit I'd like to add that this crash did occur around minutes after my laptop woke up from Sleep

A:Random BSODs caused by ntoskrnl.exe

What copy of Windows 7 did you have originally?
How did you activate your new copy of Windows?

http://www.sevenforums.com/bsod-help-support/297439-random-bsods-caused-ntoskrnl-exe.html
Relevancy 72.67%

Hello first timer here Long story short after i updated to windows from i started experiencing some randomly BSODs (ntoskrnl,memory_management) BSODs Random So i downloaded the ISO and made a clean install Immidiatelly Random BSODs (ntoskrnl,memory_management) after my newly formated pc i installed Avast mozilla and Asrock's Suite to Random BSODs (ntoskrnl,memory_management) check for driver updates At first the memory management made random crashes even if i was litteraly just browsing my emails and for some strange reason my mouse software Razer Synapsis So to my demise i uninstalled the faulty drivers uninstalled Avast run SFC repairing used CCleaner and then i remembered about the minidumps but for days or so everything was fine Since yesterday i get computer freezes if i try to restart my pc or random BSODs when im using - programs running together It's always a different event caused by ntoskrnl exe I run Verifier following instructions from your forum in order to find the culprit My system crashed as i tried to reboot from safe mode to normal mode Took me a while to be able to bring it together I'm lost can't work or anything I've attached the last minidumps as instructed Any help would be greatly appreciated

A:Random BSODs (ntoskrnl,memory_management)

   Warning
Programs that claim to update your drivers install either the wrong or corrupted drivers.
If you have installed any driver with Driver Booster 3, please remove them as it may cause trouble.

Update the USB drivers from Asmedia, if it doesn't help use different USB ports to connect mouse/keyboard on and see if that helps.
Driver Reference Table - asmtxhci.sys

Code:
*** WARNING: Unable to verify timestamp for asmtxhci.sys
*** ERROR: Module load completed but symbols could not be loaded for asmtxhci.sys
0: kd> lmvm asmtxhcistart end module name
fffff800`13c10000 fffff800`13c7c000 asmtxhci (deferred)
Image path: \SystemRoot\System32\drivers\asmtxhci.sys
Image name: asmtxhci.sys
Timestamp: Wed Jun 03 08:33:15 2015 (556E9FAB)
CheckSum: 0006C280
ImageSize: 0006C000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

http://www.tenforums.com/bsod-crashes-debugging/37498-random-bsods-ntoskrnl-memory_management.html
Relevancy 72.67%

Hey guys, I've been getting BSODs that are apparently being caused by ntoskrnl.exe. Sometimes happen within minutes of turning on the computer, sometimes not at all. I've read it may be caused by a graphics card driver, but the driver is already on its latest version. Currently running Seatools on my HD to see if that comes up with anything...

Dump files attached.

Thanks in advance!

A:Random BSODs caused by ntoskrnl.exe

You appear you have a Acer/Gateway/Packard Bell OEM_SLP key on a retail motherboard, your installation is counterfeit, please format and install with a genuine key.

http://www.sevenforums.com/bsod-help-support/297844-random-bsods-caused-ntoskrnl-exe.html
Relevancy 72.67%

Seems to happen randomly with no real triggers apart from use of the computer If I leave the PC alone it will crash eventually without me doing anything If I am using it it will crash much quicker and time till ntoskrnl.exe with associated random Multiple BSODs crash seems to be inversely proportional Multiple random BSODs associated with ntoskrnl.exe to how much I'm doing It's happened several times today alone I've not had my PC on for a month or so but it had been occurring on and off before then too I've tested the memory and hard disk recently not today and there were no errors Today I also got rid of Eset Daemon Tools and a few other programs I thought could be causing issues I've done countless other things and have tried different hard drives and so on but no luck so far TDSS Killer found nothing Computer isn't overheating and shouldn't be short of power it has been running fine for years or so without problems until this year I've attached the log files so hopefully someone can make more sense of them than me Had to upload in rar rather than zip and delete half the logs for it to actually upload though Thanks for any help

A:Multiple random BSODs associated with ntoskrnl.exe

Welcome to the forum.

Enable Driver Verifier to see if it catches any misbehaving driver: Driver Verifier - Enable and Disable
Using Driver Verifier to identify issues with Drivers

http://www.sevenforums.com/bsod-help-support/308992-multiple-random-bsods-associated-ntoskrnl-exe.html
Relevancy 72.67%

I have been receiving random BSODs for a while now. WhoCrashed has given multiple causes including possibly my audio card driver. However i have tried changing this many time to different versions to no avail. I have 4 BSOD logs from recently and i was wondering if you could look at them and suggest what you think it may be. Im running 64bit windows 7.

A:Random BSODs caused by ntoskrnl.

Hello CA,

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arguments:
Arg1: fffffa7fd2856ac4, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff880053d463a, address which referenced memory

Debugging Details:
------------------
READ_ADDRESS: GetPointerFromAddress: unable to read from fffff800034c7100
GetUlongFromAddress: unable to read from fffff800034c71c0
fffffa7fd2856ac4

CURRENT_IRQL: 2

FAULTING_IP:
cmudaxp+1ce63a
fffff880`053d463a 448b89a4000000 mov r9d,dword ptr [rcx+0A4h]

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

BUGCHECK_STR: 0xD1

PROCESS_NAME: System

TAG_NOT_DEFINED_c000000f: FFFFF80004C2DFB0

TRAP_FRAME: fffff80004c27040 -- (.trap 0xfffff80004c27040)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=fffff80004c27288 rbx=0000000000000000 rcx=fffffa800a856a20
rdx=fffffa800c92e8d0 rsi=0000000000000000 rdi=0000000000000000
rip=fffff880053d463a rsp=fffff80004c271d0 rbp=0000000000000080
r8=0000000000000080 r9=0000000000000000 r10=fffff880053e16f0
r11=0000000000000022 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei ng nz na pe nc
cmudaxp+0x1ce63a:
fffff880`053d463a 448b89a4000000 mov r9d,dword ptr [rcx+0A4h] ds:fffffa80`0a856ac4=????????
Resetting default scope

LAST_CONTROL_TRANSFER: from fffff80003297569 to fffff80003297fc0

STACK_TEXT:
fffff800`04c26ef8 fffff800`03297569 : 00000000`0000000a fffffa7f`d2856ac4 00000000`00000002 00000000`00000000 : nt!KeBugCheckEx
fffff800`04c26f00 fffff800`032961e0 : 00000000`00000000 00000000`00000000 fffffa80`0afcc700 00000000`00000000 : nt!KiBugCheckDispatch+0x69
fffff800`04c27040 fffff880`053d463a : fffffa80`06ec3030 fffffa80`0b5b20f8 00000000`00000000 fffffa80`0b5b2038 : nt!KiPageFault+0x260
fffff800`04c271d0 fffffa80`06ec3030 : fffffa80`0b5b20f8 00000000`00000000 fffffa80`0b5b2038 fffffa80`06ec3030 : cmudaxp+0x1ce63a
fffff800`04c271d8 fffffa80`0b5b20f8 : 00000000`00000000 fffffa80`0b5b2038 fffffa80`06ec3030 fffff880`0523f075 : 0xfffffa80`06ec3030
fffff800`04c271e0 00000000`00000000 : fffffa80`0b5b2038 fffffa80`06ec3030 fffff880`0523f075 00000000`00000000 : 0xfffffa80`0b5b20f8
STACK_COMMAND: kb

FOLLOWUP_IP:
cmudaxp+1ce63a
fffff880`053d463a 448b89a4000000 mov r9d,dword ptr [rcx+0A4h]

SYMBOL_STACK_INDEX: 3

SYMBOL_NAME: cmudaxp+1ce63a

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: cmudaxp

IMAGE_NAME: cmudaxp.sys

DEBUG_FLR_IMAGE_TIMESTAMP: 5062bcce

FAILURE_BUCKET_ID: X64_0xD1_cmudaxp+1ce63a

BUCKET_ID: X64_0xD1_cmudaxp+1ce63a

Followup: MachineOwner
---------

0: kd> lmvm cmudaxp
start end module name
fffff880`05206000 fffff880`05533000 cmudaxp T (no symbols)
Loaded symbol image file: cmudaxp.sys
Image path: \SystemRoot\system32\drivers\cmudaxp.sys
Image name: cmudaxp.sys
Timestamp: Wed Sep 26 13:59:02 2012 (5062BCCE)
CheckSum: 002A8DBE
ImageSize: 0032D000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Is is your Audio driver. Update it from the link provided in Driver Reference Table - cmudaxp.sys.


Code:
fffff880`092497e8 fffff880`03e62b95Unable to load image \SystemRoot\System32\Driver... Read more

http://www.sevenforums.com/bsod-help-support/269987-random-bsods-caused-ntoskrnl.html
Relevancy 72.67%

Hey there. I've been getting random BSODs (I say random as I haven't identified a specific event that has caused them) throughout this week. I haven't experienced a BSOD before, making these my first. I've gone through them with WinDBG and the only things that stood out to me were "WIN7_DRIVER_FAULT" and "ntoskrnl.exe". Again, this is the first I've ever come across a BSOD, so I've got no clue what I'm looking for. Hopefully you guys can identify what's going on.

I've uploaded the dump files here:
https://www.dropbox.com/sh/s2uk5qsrq...0HhQzeELa?dl=0

Apologies if I've made a mistake in this thread. Thanks in advance.

EDIT:

I didn't read the posting instructions. Please check my second post. Thanks.

A:Random BSODs: WIN7_DRIVER_FAULT ntoskrnl.exe

Before posting a BSOD thread, please read the instructions here: Blue Screen of Death (BSOD) Posting Instructions

If you need to add new information like the dump files, please make a new post in your initial BSOD thread. Please do not make an extra new thread.

http://www.sevenforums.com/bsod-help-support/358753-random-bsods-win7_driver_fault-ntoskrnl-exe.html
Relevancy 72.67%

Hello,

I was hoping someone could help me with a recurring BSOD issue. There doesn't seem to be any pattern as to when they occur; sometimes it will be a month in between instances, othertimes a day or a week. I've followed the instructions here:

http://www.sevenforums.com/crashes-d...tructions.html

and have attached a zip folder with all requested details. Please let me know if there is more information that would be helpful.

-Win7 64bit OEM
-Hardware and OS new in 9/2010

A:Random BSODs, MEMORY_MANAGEMENT, ntoskrnl.exe

These crashes were caused by memory management, probably by Broker.exe {AmiBroker for Win32 is a process file from company AmiBroker.com}

Please run these two tests to verify your memory and find which driver is causing the problem.

If you are overclocking anything reset to default before running these tests.
In other words STOP!!!
1-Memtest.





Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.



RAM - Test with Memtest86+

2-Driver verifier






Quote:
I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.


Driver Verifier - Enable and Disable
Further Reading
Using Driver Verifier to identify issues with Windows drivers for advanced users
Note Avast was also involved.
Avast is sometimes a contributing cause of BSOD'S .
Please remove and replace it with Microsoft Security Essentials AT LEAST TO TEST

http://files.avast.com/files/eng/aswclear5.exe

Microsoft Security Essentials - Free Antivirus for Windows

http://www.sevenforums.com/bsod-help-support/203865-random-bsods-memory_management-ntoskrnl-exe.html
Relevancy 71.81%

Hello this is Tathagata, This is my first post.I got a new setup but having BSODs for last couple of days.
Ran bluescreenview but couldn't point out the exact problem. Help guyz I'm attaching DMP files.

A:Random BSODs (PAGE_FAULT_IN_NONPAGED_AREA) ntoskrnl.exe+71f00

Did you miss the information at the top of the page explaining how to collect all the files we need to help solve the BSOD?

http://www.sevenforums.com/bsod-help-support/360615-random-bsods-page_fault_in_nonpaged_area-ntoskrnl-exe-71f00.html
Relevancy 71.81%

Hi all A friend built me a gaming computer three years ago most of the specs ntoskrnl.exe usually linked BSODs, Random often to 109s, should be in my profile and it crashes every so often Sometimes a few times in a single day sometimes once a month This can happen in the middle of a game when browsing the Internet or when the computer is simply sitting idle I have not noticed any correlation Random BSODs, often 109s, usually linked to ntoskrnl.exe at all over the years in terms of what causes it I am a relative novice and my research into the problems led me to bluescreenview and the analysis of the BSODs for any correlation within the codes themselves but this goes far beyond my capability and I'm hoping that there are people on here who might be able to scrutinize my dump files and help me out All I have learned from looking at the data is that most crashes are s with the occasional b and the crash address seems to always be at ntoskrnl exe bc I have run both memtest and the Windows memory diagnostics several times over the years and my RAM has passed every time Although this is something I can live with a friend reminded me the other Random BSODs, often 109s, usually linked to ntoskrnl.exe day that I don't have to and that computers should never crash Random BSODs, often 109s, usually linked to ntoskrnl.exe Any help would be most appreciated - I will co-operate in any way possible I followed the instructions on the sticky thread at the top of this forum so all of the relevant information should be attached Thanks

A:Random BSODs, often 109s, usually linked to ntoskrnl.exe

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 109, {a3a039d898c46a09, b3b7465eeb423947, fffff80003400920, 1}

*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : memory_corruption

Followup: memory_corruption
---------
I realise you've run some memory tests, but to thoroughly test RAM you need to do it as follows:

Run a minimum of 8 passes, preferably overnight, or until errors occur using MemTest86+.

Reference this tutorial to help you use MemTest86+:
RAM - Test with Memtest86+

Try that first. If it comes back clean, we can go hard-core and try soemthing different.

http://www.sevenforums.com/bsod-help-support/354501-random-bsods-often-109s-usually-linked-ntoskrnl-exe.html
Relevancy 71.81%

Hi,

I'm very quickly losing patience with a system given to a friend:

Philips Freevents MT1900
ECS 945G-M3 (Branded as a 945P-M3)
Intel Core2Duo 6300 (1.87Ghz)
2Gb DDR2 Ram
250Gb SATA hard drive
Windows Vista Home Premium x64 (OEM, Genuine & fresh install)
nVidia 7300 GS

I've tried:
Fresh reinstall
3 different sets of ram
New hard drive
Resetting BIOS to default via BIOS battery
Updating drivers via slimdrivers & Intel/nVidia auto-detect webtools/.exes

Windows Updates always fail on fresh installs which tells me I haven't fixed the problem. Quite frankly I'm losing my temper. Can any of you save my sanity? I've been tempted to flash the BIOS for a 945G-M3 however I risk bricking the motherboard!

A:Random BSODs, various errors all involving NTOSKRNL.EXE

Welcome
More BSODS than I can count. They show different causes. Usually an indication of a hardware problem. Test your hardware and report back.
Initial Hardware Diagnostics
On a more personal note, start with memory. There are indications that is the problem.

http://www.sevenforums.com/bsod-help-support/243226-random-bsods-various-errors-all-involving-ntoskrnl-exe.html
Relevancy 71.81%

Hello TechSupportForum staff For the past few months I've been having progressively worse PC freezes They occur fairly randomly but are most noticeable under load or while gaming When they happen the PC freezes up for a moment and the usage and ntoskrnl.exe BSODs Random freezes, AuthenticAMD PC of everything including CPU GPU and HDD drops to for a moment then goes back up to whatever usage it was at prior to the freeze Following these events a few days ago I had a BSOD which was caused by AuthenticAMD I ran the driver verifier tool and had Random PC freezes, ntoskrnl.exe and AuthenticAMD BSODs a few more ntoskrnl exe BSODs and a nvlddmkm sys BSOD after reinstalling the Nvidia graphics drivers before turning the verifier off because i'd get a BSOD a few minutes after logging on to my user account which made the PC unusable I've done memtest and HD Tune's Error Scan and both passed Looking forward to you your professional opinions and analysis OS - Windows or Vista Windows x -bit or x x What was the original installed OS on sthe ystem Windows Is the OS an OEM version came pre-installed on system or full retail version YOU purchased it from retailer Retail version Approximate age of system hardware Around and a half hears old Approximate age of OS installation if you know Around the same time as system age Have you re-installed the OS Not that I recall CPU AMD FX- Video Card GeForce GTX O C MotherBoard if NOT a laptop Gigabyte fxa-ud rev Power Supply - brand amp wattage if NOT a laptop Thermaltake Smart SE w System Manufacturer Gigabyte Technology Exact model number if laptop check label on bottom fxa-ud rev Laptop or Desktop Desktop Thanks in advance Sharkey

A:Random PC freezes, ntoskrnl.exe and AuthenticAMD BSODs

Bumping for possible assistance and analysis.

http://www.techsupportforum.com/forums/f299/random-pc-freezes-ntoskrnl-exe-and-authenticamd-bsods-1010002.html
Relevancy 71.81%

Hi there In the last - weeks I've been having a number of help 0x0000003b badly & Random ntoskrnl.exe need - - BSODs problems with my PC It BSODs on random occasions It first started at about once a week and got progressively worse - it was BSODing twice a day and windows was having a really hard time booting The BSODs seem quite random but maybe tend to happen a little more often just after exiting games or running a video About a Random BSODs - badly need help - 0x0000003b & ntoskrnl.exe week ago I got a new mobo SSD and reinstalled windows Everything was fine for a week and then it happened again Same error Its happened a second time only a few days later so it is becoming more frequent again It Random BSODs - badly need help - 0x0000003b & ntoskrnl.exe is starting to drive me insane What I've tried general notes - Reinstalled windows using new SSD replaced motherboard - Ran memory over passes with errors - Ran checkdisk on disk windows was installed on - no problems found - No overheating relatively standard - Rolled back AMD Drivers - Ran a short windows memory test - fine - Ran OCCT CPU burn in for hour - ran fine - note Windows was reinstalled to the new SSD HOWEVER the two attached HDs have the same files still in place CPU idles at about - at load GPU idles about - at load Specs OS - Windows Ultimate -bit Original - Windows Professional -bit Version - Full Retail Age - Varies - years on CPU PSU and case year on Ram and video card A few weeks on rest Win install age - Previous OS - years current less than weeks Desktop Gigabyte H M-S PV Intel Core i K Sandy Bridge GHz MB W LGA x gb Kingston gb Samsung SSD Western Digital Caviar Black TB MB Cache SATA TB Samsung SAPPHIRE HD XT GB GDDR PCI-E HDMI Seasonic S II Bronze W Plus Power Supply Lian-Li LanCool Dragonlord PC-K B Note Zip includes perfmon result within folder named quot perfmon html quot All your help is much appreciated

A:Random BSODs - badly need help - 0x0000003b & ntoskrnl.exe

Hi,

The attached DMP file is of the SYSTEM_SERVICE_EXCEPTION (3b)bug check.

This indicates that an exception happened while executing a routine that transitions from non-privileged code to privileged code.

This error has been linked to excessive paged pool usage and may occur due to user-mode graphics drivers crossing over and passing bad data to the kernel code.

BugCheck 3B, {c0000005, fffff96000116483, fffff8800ce5e030, 0}


Code:

0: kd> ln fffff96000116483
(fffff960`001163e0) win32k!HmgLockEx+0xa3 | (fffff960`0011652c) win32k!RGNOBJ::vSet
^^ The exception occurred in HmgLockEx.

--------------

1. Update to Service Pack 1 ASAP: Learn how to install Windows 7 Service Pack 1 (SP1)

2. AppleCharger.sys is listed and loaded in your modules list which is GIGABYTE On/Off Charge driver. See here for details - GIGABYTE ON/OFF Charge

Very problematic software, please remove ASAP.

3. Ensure you have the latest video card drivers. If you are already on the latest video card drivers, uninstall and install a version or a few versions behind the latest to ensure it's not a latest driver only issue. If you have already experimented with the latest video card driver and many previous versions, please give the beta driver for your card a try.

4. Be 100% sure the firmware for your SSD is up to date.

Regards,

Patrick

http://www.techsupportforum.com/forums/f299/random-bsods-badly-need-help-0x0000003b-and-ntoskrnl-exe-811114.html
Relevancy 71.81%

Noticed for the last few months that every couple of weeks or so, my computer is off when I come home. After looking in the event viewer, I noticed it mentioned something about kernel power and shutting off/restarting without a clean shutdown. I was never home to collect the minidump file before it was deleted by CCleaner (I forget to disable it), but finally got my hands on the .dmp. I've uploaded it here:

http://www.**************/?jrafr984qqt6hiv

The system is a 2008 HP pavilion elite that I've since modified and is running Windows 7 Home Premium x64 . I have actually added a new PSU (750w OCZ, which may be the culprit) and a new graphics card (AMD Radeon 6870). The rest of the components are the same for the time being. Let me know if anyone needs more info...

A:Random recurring BSODs, 0x000000f4 ntoskrnl.exe

  
Quote: Originally Posted by amrobx


Noticed for the last few months that every couple of weeks or so, my computer is off when I come home. After looking in the event viewer, I noticed it mentioned something about kernel power and shutting off/restarting without a clean shutdown. I was never home to collect the minidump file before it was deleted by CCleaner (I forget to disable it), but finally got my hands on the .dmp. I've uploaded it here:

http://www.**************/?jrafr984qqt6hiv

The system is a 2008 HP pavilion elite that I've since modified and is running Windows 7 Home Premium x64 . I have actually added a new PSU (750w OCZ, which may be the culprit) and a new graphics card (AMD Radeon 6870). The rest of the components are the same for the time being. Let me know if anyone needs more info...



Hard to tell from only one DMP but it appears to have been caused by your Symantec.
I do notice Symantec which is a frequent cause of BSOD's. I would remove and replace it with Microsoft Security Essentials at least to test.

http://us.norton.com/support/kb/web_...080710133834EN

Microsoft Security Essentials - Free Antivirus for Windows

http://www.sevenforums.com/bsod-help-support/197697-random-recurring-bsods-0x000000f4-ntoskrnl-exe.html
Relevancy 71.81%

Hi all Have been having issues with random BSODs DPC Watchdog Violations on a new notebook purchased August There is no common thread of what is running what I am doing when the BSOD occurs but they are now happening with increasing frequency - times per day Just want to solve it as it's driving me nuts The only thing I can say about the error is that it has never happened when I'm mobile with my laptop i drivers at various ntoskrnl.exe Random crashing BSODs, e not connected to the Random BSODs, various drivers crashing at ntoskrnl.exe USB hub I've also updated that driver It only happens when I am connected and using various peripherals including second display keyboard mouse That said that's the set-up under which I use the machine of the time so who knows if related Have read through a ton of forums and have tried some simple recommendations given to others with a similar issue Unfortunately I have not kept a record of what I did but these include scanning for malware viruses using Norton and BitDefender updating various drivers disabling quick start changing power management etc I have not used any memory or disk check utilities because I can't figure out how to get Windows to boot from USB I checked in BIOS and couldn't find a way to set a boot order to boot from USB maybe I missed it I also don't think I have a CD here Attached are my SF Diag logs great tool btw Below is a system summary and a mini-dump summary which shows the most recent drivers involved etc Any help will be HUGELY appreciated but keep in mind I only know enough to be dangerous - I'm not uber-techie System Summary OS Microsoft Windows System Type x Version Build Manuf Model ASUS Q LF Notebook Processor Intel Core i - U GHz Mhz Dual Core BIOS Version Date Q LF Installed Memory GB Available GB Virtual Memory GB Available VM GB Page File Space MB Display Adapters Intel R HD Graphics Family driver version NVIDIA GeForce GT M driver version Snapshot of mini-dumps Date Bugchk code Caused by Caused by Address Crash Address x igdkmd sys igdkmd sys a ntoskrnl exe f a x Wdf sys Wdf sys a ntoskrnl exe f a x ntoskrnl exe ntoskrnl exe f a ntoskrnl exe f a x Wdf sys Wdf sys ntoskrnl exe f a x ntoskrnl exe ntoskrnl exe f a ntoskrnl exe f a x igdkmd sys igdkmd sys d ntoskrnl exe f a x fileinfo sys fileinfo sys d ntoskrnl exe ca x Beep SYS Beep SYS e c ntoskrnl exe ca x igdkmd sys igdkmd sys d ntoskrnl exe ca x igdkmd sys igdkmd sys d ntoskrnl exe ca x igdkmd sys igdkmd sys d ntoskrnl exe ca x igdkmd sys igdkmd sys d ntoskrnl exe ca x BOOTVID dll BOOTVID dll ntoskrnl exe ca x hal dll hal dll db ntoskrnl exe ca x hal dll hal dll db ntoskrnl exe ca x hal dll hal dll db ntoskrnl exe ca x f ntoskrnl exe ntoskrnl exe fa ntoskrnl exe fa x hal dll hal dll db ntoskrnl exe fa x ntoskrnl exe ntoskrnl exe fa ntoskrnl exe fa Another crash occurred while I was writing this but I did not re-run the tool to grab the info before posting Will run it now though and post if it involves yet a new driver or bug code Thank goodness for auto-save and for this forum

A:Random BSODs, various drivers crashing at ntoskrnl.exe

Please search for updates for the drivers highlighted in red and update your Intel Graphics driver using the manufacturer's website.

Code:
ASMMAP64.sys Thu Jul 2 11:13:26 2009 (4A4C7A36)
LENOVO ATK Hotkey ATK0101 ACPI UTILITY (also found in Asus systems)
http://www.carrona.org/drivers/driver.php?id=ASMMAP64.sys

AiCharger.sys Fri Sep 23 04:04:40 2011 (4E7BE938)
Asus Charger Driver [br] Likely BSOD cause - haven't seen recently (15Jan2013)
http://www.carrona.org/drivers/driver.php?id=AiCharger.sys

GEARAspiWDM.sys Thu May 3 21:56:17 2012 (4FA2E2E1)
CD-ROM Class Filter Driver by Gear Software.[br]Also comes with iTunes
http://www.carrona.org/drivers/driver.php?id=GEARAspiWDM.sys

kbfiltr.sys Thu Aug 2 05:22:22 2012 (5019F26E)

kbfiltr.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

atkwmiacpi64.sys Tue Jul 2 10:35:32 2013 (51D290D4)
ATK WMIACPI Utility
http://www.carrona.org/drivers/driver.php?id=atkwmiacpi64.sys

RtsUVStor.sys Tue Jul 9 08:33:53 2013 (51DBAED1)
Realtek Semiconductor Corp USB Mass Storage Driver[br]
http://www.carrona.org/drivers/driver.php?id=RtsUVStor.sys

plctrl.sys Thu Jul 11 05:23:44 2013 (51DE2540)
ASUS Power Level Control Driver
http://www.carrona.org/drivers/driver.php?id=plctrl.sys

SYMEVENT64x86.SYS Sat Jul 27 04:26:58 2013 (51F32FF2)
Norton Internet Security
http://www.carrona.org/drivers/driver.php?id=SYMEVENT64x86.SYS

AMPPAL.sys Mon Jul 29 12:59:17 2013 (51F64B05)
Intel? Centrino? Bluetooth 3.0 + High Speed Virtual Adapter driver
http://www.carrona.org/drivers/driver.php?id=AMPPAL.sys

SYMDS64.SYS Wed Jul 31 01:29:08 2013 (51F84C44)
Symantec/ Norton NIS/ N360 driver
http://www.carrona.org/drivers/driver.php?id=SYMDS64.SYS

dump_iaStorA.sys Fri Aug 2 03:39:52 2013 (51FB0DE8)
driver created to provide disk access during crash dump file generation
http://www.carrona.org/drivers/driver.php?id=dump_iaStorA.sys

iaStorA.sys Fri Aug 2 03:39:52 2013 (51FB0DE8)
Intel RST (Rapid Storage Technology) driver
http://www.carrona.org/drivers/driver.php?id=iaStorA.sys

DptfDevPch.sys Fri Aug 2 18:22:58 2013 (51FBDCE2)
Intel(R) Dynamic Platform and Thermal Framework PCH Participant Driver
http://www.carrona.org/drivers/driver.php?id=DptfDevPch.sys

DptfDevDram.sys Fri Aug 2 18:22:58 2013 (51FBDCE2)
Intel(R) Dynamic Platform and Thermal Framework Memory Participant Driver
http://www.carrona.org/drivers/driver.php?id=DptfDevDram.sys

DptfDevProc.sys Fri Aug 2 18:23:00 2013 (51FBDCE4)
Intel(R) Dynamic Platform & Thermal Framework Processor Participant Driver
http://www.carrona.org/drivers/driver.php?id=DptfDevProc.sys

DptfManager.sys Fri Aug 2 18:23:03 2013 (51FBDCE7)
Intel(R) Dynamic Platform and Thermal Framework Manager Driver
http://www.carrona.org/drivers/driver.php?id=DptfManager.sys

Rt630x64.sys Thu Aug 15 08:23:59 2013 (520C73FF)
Realtek PCI/PCIe Adapters
http://www.carrona.org/drivers/driver.php?id=Rt630x64.sys

intelppm.sys Thu Aug 22 10:46:35 2013 (5215CFEB)
Intel Processor driver
http://www.carrona.org/drivers/driver.php?id=intelppm.sys

TeeDriverx64.sys Thu Sep 5 20:02:18 2013 (5228C72A)
Intel Management Engine Interface driver
http://www.carrona.org/drivers/driver.php?id=TeeDriverx64.sys

ccSetx64.sys Tue Sep 24 05:58:04 2013 (52410DCC)
Symantec/ Norton Common Client Settings Driver
http://www.carrona.org/drivers/driver.php?id=ccSetx64.sys

iwdbus.sys Thu Sep 26 23:38:04 2013 (5244A93C)
Intel WIDI Bus Enumerator driver[br]Related to Intel Widi - Wireless Display
http://www.carrona.org/drivers/driver.php?id=iwdbus.sys

DisplayLinkUsbIo_x64_7.6.56275.0.sys Fri Sep 27 15:11:12 2013 (524583F0)

DisplayLinkUsbIo_x64_7.6.56275.0.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

AsHIDSwitch64.sys Tue Oct 8 03:45:17 ... Read more

http://www.eightforums.com/bsod-crashes-debugging/57554-random-bsods-various-drivers-crashing-ntoskrnl-exe.html
Relevancy 70.95%

Hello guys,

In the last month I've got a lot of BSODs that are giving me the chills.
I keep the computer on at all times as I run a web and mail server on it, play games, use it as an alarm, etc..
I have no idea what is causing them, hopefully you guys can help me crack it.

I'm running on Windows 7 Pro x64, latest SP and updates.
If you need any other info, I will gladly provide it. Thanks!

A:Random BSODs caused by ntoskrnl.exe either if computer is idle or not

Hi Kryse,

Welcome to the 7forums.

Please read BSOD Posting Instructions & How to upload files

http://www.sevenforums.com/bsod-help-support/383646-random-bsods-caused-ntoskrnl-exe-either-if-computer-idle-not.html
Relevancy 70.95%

Randomly happens, sometimes in a game, sometimes when browsing, sometimes when RDP'ed in, sometimes when unattended. No repro steps yet, just be patient and it will happen. Sometimes when it blue screens, it takes the whole network down spamming the switches and router with packets.

A:Random BSODs, error 0x00000124, caused by ntoskrnl.exe

Blue Screen of Death (BSOD) Posting Instructions

http://www.sevenforums.com/bsod-help-support/289877-random-bsods-error-0x00000124-caused-ntoskrnl-exe.html
Relevancy 70.95%

Hello,

I'm getting random BSODS mostly on startup and during casual browsing eg. tasks which isn't that demanding but also occasionally during gaming.

I've searched around but I'm still clueless and I hope somebody is more familiar with these error codes than I am. Trying to debugg these BSODS without much experience has proven pretty difficult.

I have done a two runs with Memtest without any errors.

Best regards,
Fredrik

A:Random BSODS, cause: ntoskrnl.exe, tcpip.sys, Ntfs.sys, dxgmms1.sys

Welcome to the forum.

Code:
BugCheck C8, {2, 0, 0, 0}
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+1e2e2 )
??????????????????????????????????????????????????????????????????????????????????????``
BugCheck C5, {fffff8100e81b6b0, 2, 0, fffff8000e7c0a4e}
Probably caused by : Pool_Corruption ( nt!ExDeferredFreePool+192 )
??????????????????????????????????????????????????????????????????????????????????????``
BugCheck D1, {41, 2, 1, fffff88001850c0e}
Probably caused by : memory_corruption
??????????????????????????????????????????????????????????????????????????????????????``
BugCheck 50, {fffff88048345f40, 0, fffff88001253c0a, 5}
Probably caused by : memory_corruption
??????????????????????????????????????????????????????????????????????????????????????``
BugCheck FC, {fffff880091739d0, 8000000399ed2963, fffff880091732d0, 2}
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+44dfc )
??????????????????????????????????????????????????????????????????????????????????????``
BugCheck C5, {fffff8100e8516b0, 2, 0, fffff8000e7f6a4e}
Probably caused by : Pool_Corruption ( nt!ExDeferredFreePool+192 )
??????????????????????????????????????????????????????????????????????????????????????``
BugCheck 1000007E, {ffffffffc0000005, fffff8800f0203cf, fffff880023717b8, fffff88002371010}
Probably caused by : dxgmms1.sys ( dxgmms1!VIDMM_GLOBAL::ProcessDeferredCommand+9cb )
??????????????????????????????????????????????????????????????????????????????????????``
Please follow the steps below:






Quote:
Based on the bugchecks, I would recommend you follow and complete the steps given below:1. If you are overclocking any hardware, please stop. Reset any changed values back to default and reset/clear CMOS: Clear CMOS - 3 Ways to Clear the CMOS - Reset BIOS. Uninstall any overclocking tool as these can also be a reason of blue screens.

2. Uninstall your current antivirus software. It can be a cause of BSOD very often. Please remove it with its removal tool and use Microsoft Security Essentials in its place. Malwarebytes is a great combination with it. Go through this thread for more info.

3. Run Disk Check with both boxes checked for all HDDs and with Automatically fix file system errors. Post back your logs for the checks after finding them using Check Disk (chkdsk) - Read Event Viewer Log

4. Run SFC /SCANNOW Command - System File Checker to check windows for integrity violations. Run it up to three times to fix all errors. Post back if it continues to show errors after a fourth run or if the first run comes back with no integrity violations.

5. Make scans with Kaspersky TDSskiller and ESET Online scanner.

6. Perform a Clean Start up, this will help avoid any problematic applications from bugging the system.

7. Use Revo Uninstaller Free to uninstall stubborn software. Opt for Advanced Mode and uninstall the software, delete the leftover registry entries.

8. Use Crystal Disk Info to upload a screenshot of your Hard Drives (s). Test your Hard Drives (s) running a Hard Drive Diag.

9. Test and Diagnose RAM issues with RAM - Test with Memtest86+. Pay close attention to Part 3 of the tutorial "If you have errors" Take the test for at least 7-10 passes. It may take up to 22 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold.

10. Monitor hardware temperature for overheating issues with system monitoring software like Speccy or HWMonitor. Upload a screen shot of the Summary tab as well:Piriform - Speccy
CPUID - HWMonitor



Update these drivers:

SSPORT.sys Fri Aug 12 05:07:32 2005 (42FBDA34)
Samsung printer driver
Driver Reference Table - SSPORT.sys

nusb3hub.sys Fri Dec 10 10:50:35 2010 (4D01B19B)
NEC Electronics USB 3.0 Host Controller Driver (previous BSOD issues with 2010 and earlier versions)
Driver Reference Tab... Read more

http://www.sevenforums.com/bsod-help-support/309546-random-bsods-cause-ntoskrnl-exe-tcpip-sys-ntfs-sys-dxgmms1-sys.html
Relevancy 70.95%

For the past few days, beginning while I was out of the country and hadn't touched my computer for a couple of weeks, I started getting random BSODs linked to asmtxhci.sys and ntoskrnl.exe. Today, after installing VirtualCloneDrive, I got one linked to ElbyCDIO.sys. BSOD results attached.

http://www.sevenforums.com/bsod-help-support/393535-random-bsods-linked-asmtxhci-sys-ntoskrnl-exe-elbycdio-sys.html
Relevancy 70.95%

Hi all I decided to upgrade both of my dell optiplex machines with an Intel SSD GB and clean install Windows -bit Setup went smoothly However after all updates and drivers were installed I started getting random frequent BSOD crashes with nearly all of them pointing to ntoskrnl exe I don't think I've ever even encountered a blue screen back when I used my old HDD I suspected bad RAM at first but Memtest showed no errors after running for hours each stick I know it has something to do with BSODs Random, Frequent ntoskrnl.exe+75169 Seemingly -- the SSD but I just can't figure it out Dump info attached Unfortunately one of my machines ntoskrnl.exe+75169 -- Seemingly Random, Frequent BSODs which already experienced many BSODs is in a different city ntoskrnl.exe+75169 -- Seemingly Random, Frequent BSODs and I can't access it at the moment I have just finished the second machine and just got my first BSOD Ideally I would like to have several BSODs so I cant establish some kind of pattern but maybe we can make progress by checking out the first BSOD since most of them will ntoskrnl.exe+75169 -- Seemingly Random, Frequent BSODs probably be identical anyway Thank you so much They are configured basically the same Core Quad GB RAM x GB HIS Radeon HD

A:ntoskrnl.exe+75169 -- Seemingly Random, Frequent BSODs

There are no .dmp files present in the ZIP file.

Do this:
1. Check if there are .dmp files in C:\Windows\Minidump
- if "Yes", use 7ZIP and upload them here in your next reply
- if "No", follow steps 2 to 3 below

2. Enable .dmp file creation: (Small dump file / minidump is fine)
Dump Files - Configure Windows to Create on BSOD

3. Run Driver Verfiier as explained here:

Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.
Driver Verifier - Enable and Disable

Driver Verifier will cause your computer to run very sluggishly - this is normal. What it is trying to do is force your system to BSOD and isolate the offending driver/s. When it does, reboot, disable driver verifier, reboot as normal and upload the new dmp file/s here.

I recommend creating a system restore point before turning on driver verifier:
System Restore Point - Create

If your system fails to boot to desktop once driver verifier is enabled, turn it off by booting into Safe Mode:
Safe Mode

http://www.sevenforums.com/bsod-help-support/358294-ntoskrnl-exe-75169-seemingly-random-frequent-bsods.html
Relevancy 70.95%

Hello I'm not very tech savvy Bluescreenview BSODs ntoskrnl.exe blames daily, Random almost so please bare with me Random BSODs almost daily, Bluescreenview blames ntoskrnl.exe while I try to explain my issue For about - weeks now I've been experience random BSODs After trying several things I decided to reset to factory last week All was well until a few days later it continued with another BSOD Ever since then I've been getting them at random Sometimes it'll happen minutes after I boot my computer other times it could take a day or so I download Bluescreenview in hopes that I could find what was causing this issue and get it resolved Bluescreenview stats that the bug check string is KMODE EXCEPTION Random BSODs almost daily, Bluescreenview blames ntoskrnl.exe NOT HANDLED caused by driver ntoskrnl exe There are other crashes where the driver was hal dll and win k sys I'm not sure how to post my MiniDump files I've tried Random BSODs almost daily, Bluescreenview blames ntoskrnl.exe accessing them even with the Windows Debugging tool but it says I don't have permission to open the file Information about my system Windows Home Premium bit Acer Aspire X GB ram GB usable Processor AMD Athlon tm II X Processor GHz Service Pack is installed Any help suggestions or assistance would be greatly appreciated

A:Random BSODs almost daily, Bluescreenview blames ntoskrnl.exe

http://www.sevenforums.com/crashes-d...tructions.html

Seems like hardware errors
Run a RAM test
RAM - Test with Memtest86+

Run Prime 95 to test your CPU. Carefully the instructions in this tutorial: CPU - Stress Test with Prime95. Run 3 separate tests, one on each of the settings (Blend, Small FFTs, Large FFTs). Post back with your results.
Note that this test may overheat the CPU, ensure proper cooling

http://www.sevenforums.com/bsod-help-support/212959-random-bsods-almost-daily-bluescreenview-blames-ntoskrnl-exe.html
Relevancy 70.52%

Lately I have been getting a few BSODs caused by ntoskrnl.exe. The BSODs do not seem to have any patterns; I got one when playing, another one when closing a different game and opening Facebook, or even when not using my computer (Heard it reset while being in my room).

The three I got so far this month were caused by ntoskrnl.exe+1063df. The other ones also involve ntoskrnl, but the other file is different.

My BIOS is up to date (Did it two days ago)

EDIT: I ran a Memtest86+ today and got 6 passes/ no errors.

If you need any other information, please say so!

Thank you all in advance!

A:Random and frequent ntoskrnl.exe BSODs (PFN list corrupt, 0x0000004e)

Daemon tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known cause for BSOD's.
Please remove Daemon Tools and run the SPTD pass through remover.Uninstall Daemon Tools
Download the SPTD standalone installer and follow these steps:Double click the executable to open it
Click on the button shown below


If the button is grayed out, like in the image, there is no more SPTD installation on your system, and you can close the window

Please update the Razer mouse driver
Driver Reference Table - rzudd.sys

Code:
fffff880`0e06cb58 fffff880`02010000Unable to load image \SystemRoot\system32\DRIVERS\rzudd.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for rzudd.sys
*** ERROR: Module load completed but symbols could not be loaded for rzudd.sys
rzudd+0x10000
2: kd> lmvm rzudd
start end module name
fffff880`02000000 fffff880`02033000 rzudd T (no symbols)
Loaded symbol image file: rzudd.sys
Image path: \SystemRoot\system32\DRIVERS\rzudd.sys
Image name: rzudd.sys
Timestamp: Tue Aug 11 13:13:50 2015 (55C9D8EE)
CheckSum: 00039EA2
ImageSize: 00033000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4


Diagnostic Test

 RAM TEST

Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 7 Forums



   Note


MemTest86+ needs to be run for at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.

http://www.sevenforums.com/bsod-help-support/387343-random-frequent-ntoskrnl-exe-bsods-pfn-list-corrupt-0x0000004e.html
Relevancy 70.52%

Random BSODs hal dll a b ntoskrnl exe cb Spex Toshiba Satellite L Laptop Windows Ultimate x SP Fresh install no updates whatsoever Intel Core Duo P hour Prime DONE GB Random hal.dll+12a3b, IRQL, 0x124.. BSODs ntoskrnl.exe+18cb03, RAM GB GB different speeds hour MEMTEST DONE Random BSODs hal.dll+12a3b, ntoskrnl.exe+18cb03, IRQL, 0x124.. ATI Radeon Mobility HD series hour Prime DONE WD Caviar GB HDD Fresh format chkdsk R DONE quot HDD Scan quot DONE Tried reseating RAM HDD DVD Other checks SFC no problems dxdiag shows no issues have turned on VERIFIER EXE and selected all non MS and some MS as Random BSODs hal.dll+12a3b, ntoskrnl.exe+18cb03, IRQL, 0x124.. well drivers to monitor Software Google Chrome No AV or Firewall Windows' Firewall disabled Tried with full drivers installed full Windows Updates Same results Now reformatted with fresh install with no updates whatsoever and no drivers isntalled Same results Tried a different source CD for Win installation Same results Problem Description Random BSODs showing x mostly IRQL x E x A hal dll ntoskrnl Occurs randomly and very frequently Half of the time can't even load into desktop Prime when it runs shows no errors but half of the time when trying to RUN the workers it the program crashes WITHOUT giving a BSOD or a Random BSODs hal.dll+12a3b, ntoskrnl.exe+18cb03, IRQL, 0x124.. freeze etc In my weeks of trying to debug this laptop there have been moments when it runs fine and I was able to play some games notably World of Tanks Pirates of the Burning Seas to test and ran beautifully Please help me solve this issue I truly want to learn how to thanks Attached is the zip files from SF Diags

A:Random BSODs hal.dll+12a3b, ntoskrnl.exe+18cb03, IRQL, 0x124..

oh and to be sure, let me remark that i have done zero overclocking.
tried with just one stick of RAM (both).
unplugged all USB.
unplugged power and ran on purely battery.
thanks.

http://www.sevenforums.com/bsod-help-support/252349-random-bsods-hal-dll-12a3b-ntoskrnl-exe-18cb03-irql-0x124.html
Relevancy 70.52%

Hi Guys I'd appreciate some help here I've been getting BSODs for quite a while now and would like some help in finding a solution Attached is my SF zip Looking at the dmp files it seems it's either ntoskrnl or dxgkrnl dxgmms nvlddmkm I have no idea what this means Some BSODs: ntoskrnl, 116 Random BCCode nvlddmkm, dxgkrnl, dxgmms1, other info that may be relevant maybe Just yesterday using SlimDrivers I updated all drivers This Random BSODs: ntoskrnl, dxgkrnl, dxgmms1, nvlddmkm, BCCode 116 did not help I recently did a memtest and found a faulty stick which is why I'm down to sticks I previously had After taking out that stick I ran memtest several more times and all came back with zero errors That seemed to reduce but Random BSODs: ntoskrnl, dxgkrnl, dxgmms1, nvlddmkm, BCCode 116 not eliminate completely some BSODs Before the onslaught of BSODs occurred I did have some video card crashes where my screen would black out for a second or two before coming back with a notice saying my Random BSODs: ntoskrnl, dxgkrnl, dxgmms1, nvlddmkm, BCCode 116 video card or driver failed and then recovered no system shut down or reset just video This was completely fixed after I opened up my case and dusted everything Most if not all BSODs are followed by BCCode which google tells me is a video card driver failure Also with most BSODs the monitor turns black no signal and the audio loops for a second or so before the system shuts down or restarts I'm assuming the screen is black and not blue because the video not working I was previously using the newest NVIDIA drivers for my card but saw some suggestions through googling that I could try previous versions to see if they were more stable Unfortunately it didn't help I did the NVIDIA quot Clean Install quot option every time I installed new drivers I did not however do the safe-mode remove since I read that quot clean install quot was essentially the same thing Most BSODs occur when I'm playing games The games I play do not really require heavy graphics BSODs happen quite often when playing Civ both DX and DX Sometimes it crashes when I'm just browsing the web A more recent BSOD occurred just a few minutes after starting up my computer I'm not sure if this is relevant but I was able to run DMark tests without any BSOD so I'm not sure if the crash really has to do with GPU load I did monitor the CPU and GPU temperatures before some of the BSODs and it did not look like anything was overheating Also I recently set my BIOS to XMP overclocking not sure if that's how you say it Occasionally I'll get a message on boot that says quot overclocking failed quot I suspect you guys will tell me to turn it off and see if it still BSOD BSODs happened with and without overclocking If I need to provide more info please let me know Thanks in advance for the help

A:Random BSODs: ntoskrnl, dxgkrnl, dxgmms1, nvlddmkm, BCCode 116

I huess you are overclocking.

Code:
CPUID: "Intel(R) Core(TM) i5 CPU 760 @ 2.80GHz"
MaxSpeed: 2800
CurrentSpeed: 2809
As you are getting BSODs, you should stop overclocking and run all the hardware components like CPU, GPU and RAM to their default settings. Also set the BIOS to default, too.
How To Clear CMOS (Reset BIOS)

Check if the Power Supply Unit (PSU) supplying adequate power to the computer or not.
eXtreme Power Supply Calculator
At least 30% free is good. Also let us know about the wattage of your PSU.

Is the computer hot? Report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy.

Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

Display driver installed is seeming to be latest version ... so not touching it right now. Let us know the results. Depending on those we will go for further troubleshooting.
_________________________________________________________________________

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 116, {fffffa800a0474e0, fffff880051b2ed0, ffffffffc000009a, 4}

Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+8e9ed0 )

Followup: MachineOwner
---------

3: kd> lmvm nvlddmkm
start end module name
fffff880`048c9000 fffff880`053aa000 nvlddmkm T (no symbols)
Loaded symbol image file: nvlddmkm.sys
Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
Image name: nvlddmkm.sys
Timestamp: Mon May 13 00:39:45 2013 (518FE8F9)
CheckSum: 00AB6DED
ImageSize: 00AE1000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

http://www.sevenforums.com/bsod-help-support/297047-random-bsods-ntoskrnl-dxgkrnl-dxgmms1-nvlddmkm-bccode-116-a.html
Relevancy 70.52%

Hello All,

My XPS 13 9350 has been BSODing again after a few months of relative stability.

I've ran memtest86, 20 runs without errors, chkdsk, sfc/scannow, and DISM scanhealth all returning without errors or integrity violations. I've also used Whocrashed to analyze the dump files, but it cannot tell me which drivers are bad or have gone wrong.The only common factor is that the errors are consistently associated to ntoskrnl.sys and ndis.sys (also ntkrnlmp sometime before).

Also to note, the most recent dump was a driver verifier BSOD if that helps.

I have attached the dump files to the thread, and would appreciate your assistance again.

Thank you!

http://www.tenforums.com/bsod-crashes-debugging/63187-random-bsods-dell-xps-13-9350-ntoskrnl-ntkrnlmp-ndis.html
Relevancy 69.66%

year-old Sony Vaio VGN-FW L runnung Windows HP -bit SP Has Gb RAM and Gb WD Black HDD BPKT Everything has been running smoothly - Code 0x0000004a Random Spate BSODs Recent ntoskrnl.exe of in Error until the last few weeks - basically since th Sept this Recent Spate of Random BSODs - Error Code 0x0000004a in ntoskrnl.exe year when I have been getting random BSODs in total since then I'm not doing anything processor memory intensive like playing games and i have returned to the PC on several occasions to find the Recent Spate of Random BSODs - Error Code 0x0000004a in ntoskrnl.exe message that the computer has recovered from an unexpected shutdown Looking at the minidump logs - they are all IRQL GT-Zero errors error codes are all x a in ntoskrnl exe and with the exception of two earlier BSODs on May and Aug they all have the same crash address ntoskrnl exe c Am I looking at a likely RAM problem here I thought at first it might be a HDD pagefile issue The laptop vents and fan was cleaned of lint around a year ago when I replaced the power button and the CPU was re-seated and fresh thermal compound applied I have a system monitor which is reporting that currently the CPU is running at C and the HDD at C Any help suggestions gratefully appreciated Zaph of-fat-hcouk

A:Recent Spate of Random BSODs - Error Code 0x0000004a in ntoskrnl.exe

Hi ZaphodB,

Please read BSOD Posting Instructions & How to upload files

http://www.sevenforums.com/bsod-help-support/382812-recent-spate-random-bsods-error-code-0x0000004a-ntoskrnl-exe.html
Relevancy 68.8%

Win7 laptop running fine, suddenly 2 BSODs today, within an hour. First occurred while surfing (firefox), second occurred without any keyboard/mouse activity. No new hardware installed since new hard drive about a month ago. SF attached. TIA

A:Random BSODs, ntoskrnl, driver power state failure reports on minidump

Sorry for the late reply, Your dump files are not opening for me.
But you should remove some add ons to firefox, specially the adxloader.dll





Quote:
Event[10757]:
Log Name: Application
Source: SideBySide
Date: 2012-10-03T15:36:32.000
Event ID: 9
Task: N/A
Level: Error
Opcode: N/A
Keyword: Classic
User: N/A
User Name: N/A
Computer: RWT-PC
Description:
Activation context generation failed for "C:\Users\RWT\AppData\Roaming\DocuSign\DocuSign Ink\adxloader.dll.Manifest".Error in manifest or policy file "C:\Users\RWT\AppData\Roaming\DocuSign\DocuSign Ink\adxloader.dll.Manifest" on line 2. The manifest file root element must be assembly.


It may be the cause of the crash while using firefox.

Just a question, when the keyboard and mouse was inactive and you got the crash, was the Cyberlink editing program in use? The event log says so, and actually that program failed there.

You should update the nvidia display driver, too.

Code:
Driver c:\windows\system32\drivers\nvlddmkm.sys (8.17.12.7527, 10.09 MB (10,583,656 bytes), 6/23/2011 6:38 PM)
Update your WiFi driver.

Code:
Driver c:\windows\system32\drivers\netw5s32.sys (13.1.1.1, 6.44 MB (6,755,840 bytes), 1/13/2010 3:36 PM)
Update ethernet controller driver.

Code:
Driver c:\windows\system32\drivers\yk62x86.sys (11.43.1.3, 310.28 KB (317,728 bytes), 5/26/2011 2:29 AM)
Free up the startup.
Click on the Start button
Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the “Startup” tab.
Deselect all items other than the antivirus.
Apply > OK
Accept the restart.
Let us know the situation.

http://www.sevenforums.com/bsod-help-support/257285-random-bsods-ntoskrnl-driver-power-state-failure-reports-minidump.html
Relevancy 64.07%

Hi

A few days ago I did a new hardware build and installed W7 64 ultimate. I included a Corsair SSD as my boot drive for the speed advantage.

I have done some investigation and tried to track down the cause of the BSOD but to no avail. Currently they are happening once\ twice or more a day but very erratic so have no confidence in the system at the moment.

I have uploaded dumps of recent crashes in the hope someone here can help.

Anything would be appreciated. Thanks.

A:random BSODs with new build - error related to "ntoskrnl.exe+7cc40"?

Run a RAM test RAM - Test with Memtest86+
Stop any Overclocking if any.

Remove any Avast software, use MSE instead.
Uninstall Asus PC Probe, Smart Doctor, Asus update or any other Asus utilities.

Are you using any old(pre-Vista) software that might not be 64-bit compatible?


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

CRITICAL_STRUCTURE_CORRUPTION (109)
This bugcheck is generated when the kernel detects that critical kernel code or
data have been corrupted. There are generally three causes for a corruption:
1) A driver has inadvertently or deliberately modified critical kernel code
or data. See http://www.microsoft.com/whdc/driver/kernel/64bitPatching.mspx
2) A developer attempted to set a normal kernel breakpoint using a kernel
debugger that was not attached when the system was booted. Normal breakpoints,
"bp", can only be set if the debugger is attached at boot time. Hardware
breakpoints, "ba", can be set at any time.
3) A hardware corruption occurred, e.g. failing RAM holding kernel code or data.
Arguments:
Arg1: a3a039d89c614680, Reserved
Arg2: b3b7465eeede15d6, Reserved
Arg3: fffff80001dfe036, Failure type dependent information
Arg4: 0000000000000001, Type of corrupted region, can be
0 : A generic data region
1 : Modification of a function or .pdata
2 : A processor IDT
3 : A processor GDT
4 : Type 1 process list corruption
5 : Type 2 process list corruption
6 : Debug routine modification
7 : Critical MSR modification

Debugging Details:
------------------
BUGCHECK_STR: 0x109

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: CODE_CORRUPTION

PROCESS_NAME: System

CURRENT_IRQL: 0

LAST_CONTROL_TRANSFER: from 0000000000000000 to fffff80001cd0c40

STACK_TEXT:
fffff880`021c45d8 00000000`00000000 : 00000000`00000109 a3a039d8`9c614680 b3b7465e`eede15d6 fffff800`01dfe036 : nt!KeBugCheckEx
STACK_COMMAND: kb

CHKIMG_EXTENSION: !chkimg -lo 50 -d !nt
fffff80001dfe44d - nt!ExDeferredFreePool+9ed
[ 40:00 ]
1 error : !nt (fffff80001dfe44d)

MODULE_NAME: memory_corruption

IMAGE_NAME: memory_corruption

FOLLOWUP_NAME: memory_corruption

DEBUG_FLR_IMAGE_TIMESTAMP: 0

MEMORY_CORRUPTOR: ONE_BIT

FAILURE_BUCKET_ID: X64_MEMORY_CORRUPTION_ONE_BIT

BUCKET_ID: X64_MEMORY_CORRUPTION_ONE_BIT

Followup: memory_corruption
---------

http://www.sevenforums.com/bsod-help-support/202579-random-bsods-new-build-error-related-ntoskrnl-exe-7cc40.html
Relevancy 63.64%

Hello Earlier this week i installing related after to BSODS ntoskrnl.exe new GFX "Random" installed a new graphics card ASUS GTX Ti and GB new memory Every day since that i have been getting what appears to me to be random BSODS They all seem to somehow related to ntoskrnl exe though but the crash messages are new everytime I've ran memtest to exclude my new memory but it definitely has something to do with the new gfx card Yesterday i saw there was new drivers released for them wich i upgraded too after that yesterday i have only had Windows explorer crashing What also seems to point to the card is that the computer ran fine i safe mode for hours straight I uninstalled the card before removing the old one and did a clean "Random" BSODS after installing new GFX related to ntoskrnl.exe install for the new drivers I previously used Driver Cleaner Pro but that software seems to now remembering it being free earlier Runnig W X Ultimate retail and about two years since install no re-installs since Thanks in advance

A:"Random" BSODS after installing new GFX related to ntoskrnl.exe

ASACPI.sys the 2005 version is a huge cause of BSODs

Please visit this link: ASUSTeK Computer Inc. -Support- Drivers and Download P7P55D LE
Scroll down to the Utilities category, then scroll down to the "ATK0110 driver for WindowsXP/Vista/Windows 7 32&64-bit" (it's about the 12th item down).
Download and install it.
Go to C:\Windows\System32\drivers to check and make sure that the ASACPI.sys file is date stamped from 2009 or 2010 (NOT 2005)

Code:
ASACPI.sys fffff880`10bf3000 fffff880`10bfb000 0x00008000 0x42476c4c 28/03/2005 06:30:36
Please remove any CD virtualization programs such as Daemon Tools and Alcohol 120%. They use a driver, found in your dmp, sptd.sys, that is notorious for causing BSODs. Use this SPTD uninstaller when you're done: DuplexSecure - Downloads
You can use MagicDisc as an alternative.

Code:
sptd.sys fffff880`0106e000 fffff880`01194000 0x00126000 0x4ad24632 12/10/2009 00:55:14
You can test your Graphics Card with OCCT
http://www.sevenforums.com/tutorials...test-occt.html

What were the results of Memtest? You should run it for at least 7 Passes

http://www.sevenforums.com/bsod-help-support/189561-random-bsods-after-installing-new-gfx-related-ntoskrnl-exe.html
Relevancy 63.64%

I think this may be due to uTorrent, but am not sure.

Dump files attached. Any help appreciated!

If it helps, I recently installed Win 7 SP1 and a Fujitsu S1500 Scansnap scanner. I have McAfee and Malwarebytes antivirus.
 

A:BSOD - netio.sys and ntoskrnl.exe

Netio.sys refers to your motherboards network driver. It may have to be re-installed. Did you install Windows 7 over an older version of Windows? Have you installed all the Windows 7 Updates, including all the optional updates?
 

http://www.techspot.com/community/topics/bsod-netio-sys-and-ntoskrnl-exe.182930/
Relevancy 63.64%

Hello About a week and a half ago I started getting intermittent blue screens with the bug check string system + (netio.sys) System_Service_Exception ntoskrnl.exe service exception netio sys I've been all over the internet looking for a solution but so far have found none Things I've tried include doing a complete install of video drivers and running sfc scannow Using sfc scannow I get a message saying windows found corrupted files but was unable to fix them I have no idea if that is relevant or not Running it multiple times produces the same results I can't pin down System_Service_Exception (netio.sys) + ntoskrnl.exe if I'm doing anything specific to cause it Two of the times it happened I was watching youtube videos and once it happened almost immediately after waking the computer up from sleep Something to note is this only started after one of the recent updates to windows so I don't think it's hardware related at least I hope I am running a slight overclock on my cpu but I have been running the same overclock since I built this computer back in august and it has been perfectly stable since then

A:System_Service_Exception (netio.sys) + ntoskrnl.exe

Code:
BugCheck 3B, {c0000005, fffff8017a960b84, ffffd000f3932810, 0}

*** WARNING: Unable to verify timestamp for aswStm.sys
*** ERROR: Module load completed but symbols could not be loaded for aswStm.sys
Probably caused by : NETIO.SYS ( NETIO!StreamProcessCallout+594 )

Followup: MachineOwner
---------
Avast is playing in. Sometimes it happens.

Have a test. Uninstall Avast, activate Defender and get MBAM freeware alongwith it. See how it goes. Let us know.

http://www.tenforums.com/bsod-crashes-debugging/41404-system_service_exception-netio-sys-ntoskrnl-exe.html
Relevancy 63.64%

Hi Just registered to see if i can get some help with a very annoying bsod Some time ago i started getting bsod complaining netio sys ntoskrnl exe and also tcpip sys I think i ntoskrnl.exe - NETIO.SYS BSOD solved the tcpip sys by removing peerblock but the other ones remained Tried updating Ethernet BSOD - NETIO.SYS ntoskrnl.exe driver atheros L E but with the last driver the network gets extremely slow so i reverted back to the driver from asus site It can work weeks without one BSOD or get a lots of then in a single day Today already and counting Already run memtest and it passed First BSOD Code Microsoft R Windows Debugger Version AMD Copyright c Microsoft Corporation All rights reserved Loading Dump File C Windows Minidump - - dmp Mini Kernel Dump File Only registers and stack trace are available Symbol search path is SRV c symbols http msdl microsoft com download symbols Executable search path is Windows Kernel Version Service Pack MP procs Free x Product WinNt suite TerminalServer SingleUserTS Built by amd fre win sp gdr - Machine Name Kernel base xfffff e c PsLoadedModuleList xfffff Debug session time Mon Jan UTC System Uptime days Loading Kernel Symbols Loading User Symbols Loading unloaded module list Bugcheck Analysis Use analyze -v to get detailed debugging information BugCheck D ffffffff cd fffff a f a Probably caused by NETIO SYS NETIO FreeSomeCacheBucketEntries a Followup MachineOwner --------- - - Code Microsoft R Windows Debugger Version AMD Copyright c Microsoft Corporation All rights reserved Loading Dump File C Windows Minidump - - dmp Mini Kernel Dump File Only registers and stack trace are available Symbol search path is SRV c symbols http msdl microsoft com download symbols Executable search path is Windows Kernel Version Service Pack MP procs Free x Product WinNt suite TerminalServer SingleUserTS Built by amd fre win sp gdr - Machine Name Kernel base xfffff e PsLoadedModuleList xfffff Debug session time Mon Jan UTC System Uptime days Loading Kernel Symbols Loading User Symbols Loading unloaded module list Bugcheck Analysis Use analyze -v to get detailed debugging information BugCheck C d fffffa d e b f fffffa c Probably caused by ntkrnlmp exe nt KiDeliverApc c Followup MachineOwner --------- - - Code Microsoft R Windows Debugger Version AMD Copyright c Microsoft Corporation All rights reserved Loading Dump File C Windows Minidump - - dmp Mini Kernel Dump File Only registers and stack trace are available Symbol search path is SRV c symbols http msdl microsoft com download symbols Executable search path is Windows Kernel Version Service Pack MP procs Free x Product WinNt suite TerminalServer SingleUserTS Built by amd fre win sp gdr - Machine Name Kernel base xfffff e PsLoadedModuleList xfffff Debug session time Mon Jan UTC System Uptime days Loading Kernel Symbols Loading User Symbols Loading unloaded module list Bugcheck Analysis Use analyze -v to get detailed debugging information BugCheck A fffff edad c WARNING Unable to verify timestamp for AVerPola sys ERROR Module load completed but symbols could not be loaded for AVerPola sys Probably caused by AVerPola sys AVerPola afe Followup MachineOwner --------- The last one seems to be complaining with my dvb-t avermedia usb adapter i don't know why That driver is the latest All minidumps in attached zip Thanks in advance EDIT Didn't saw the notice above adding the zip file It has some more dumps that the other zip

A:BSOD - NETIO.SYS ntoskrnl.exe

Code:
BugCheck A, {0, 2, 1, fffff80002edad6c}

*** WARNING: Unable to verify timestamp for AVerPola.sys
*** ERROR: Module load completed but symbols could not be loaded for AVerPola.sys
Probably caused by : AVerPola.sys ( AVerPola+1afe4 )

Code:
Usual causes: Kernel mode driver, System Service, BIOS, Windows, Virus scanner, Backup tool, compatibility

Code:
1: kd> lmvm AVerPola
start end module name
fffff880`0594a000 fffff880`059e2100 AVerPola T (no symbols)
Loaded symbol image file: AVerPola.sys
Image path: \SystemRoot\system32\DRIVERS\AVerPola.sys
Image name: AVerPola.sys
Timestamp: Wed Aug 22 09:18:04 2012 (503495BC)
CheckSum: 0009C2D8
ImageSize: 00098100
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
This driver seems to be causing some issues, however, it may also be due to RAM problems or compatibility problems if you have fully updated the driver.

How many passes did you run MemTest86+ for?

Memory:RAM - Test with Memtest86+
Run Memtest86+ for least 9-10 passes, and preferably overnight as it can take a while to fully complete.

Test each RAM stick individually, if an error is found then move the same RAM stick into the next DIMM slot and test again, if errors are found for the same RAM stick in every available slot then you have a faulty RAM module. On the other hand, if no errors are found in the next slot or the other slots for the same RAM module, then you have a faulty DIMM slot.

Test each RAM stick and every motherboard DIMM slot available.

Check for any driver compatibility issues with:Windows 7 Upgrade Advisor - Download - Microsoft Windows
Reduce the number of programs at startup, to avoid any driver or program conflicts:Troubleshoot Application Conflicts by Performing a Clean Startup
Please upload a .NFO file:

Start > Type: msinfo32 > File, Save

Install and perform full scans with:Malwarebytes : Free anti-malware download
Microsoft Security Essentials | Protect against viruses, spyware, and other malware
Remember to install the free version of Malwarebytes not the free trail; untick the free trial box during installation. MSE is the most lightweight and compatible with the Windows 7 operating system.

You can also view this thread for a complete free and lightweight security protection combination:Good and Free system security combination.

http://www.sevenforums.com/bsod-help-support/273931-bsod-netio-sys-ntoskrnl-exe.html
Relevancy 63.21%

Hello, all. I don't have much experience diagnosing these issues; fortunately all my machines current and past have been solid. Unfortunately the machine I put together for work is BSODing with no pattern I can recognize -- sometimes she'll run fine for a few weeks other times she'll crash a few times in one day. I use it in the same general manner on a week-daily basis. Thirty dumps attached, I hope that's enough. :] I'm inclined to think it's a driver issue, but, again, little experience diagnosing such issue. Any insight is greatly appreciated.

A:"Random" BSODs. Sometimes ntkrnlmp.exe but mostly ntoskrnl.exe

Hi Daphault.

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

If it does not show any error, enable Driver Verifier to monitor the drivers.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.



   Information
Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.



   Warning
Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.



   Tip

If you fail to get on the Desktop because of DV, Boot into Advanced Boot Options > Safe mode. Disable DV there. Now boot normally again, and try following the instruction of enabling DV again.
If you cannot boot in Safe mode too, do a System Restore to a point you made earlier.

Let us know the results, with the subsequent crash dumps, if any. Post it following the Blue Screen of Death (BSOD) Posting Instructions.

http://www.sevenforums.com/bsod-help-support/325723-random-bsods-sometimes-ntkrnlmp-exe-but-mostly-ntoskrnl-exe.html
Relevancy 62.78%

OS - Windows 7 Home Premium 64 bit
Fresh home build and install
OEM self installed
All new parts
Re-installed once but not activated
Intel i3-4130 Haswell
Onboard Intel HD4400 graphics
Gigabyte GA-Z87X-UD4H
Rosewill 500 watt p/s
Corsair Vengeance 8GB DDR3 1600 CMZ8GX3M2A1600C9
WD800JD Internal Hard Drive

Hello and Good Day all. This is my brand new system and O/S and I've encountered a couple of BSOD's that are annoying. Appreciate your time to view and diagnose these files. Hopefully I've prepared them correctly -:)
I inadvertently posted as a reply to the BSOD instructions at the top of the forum home page

A:[SOLVED] BSOD ntoskrnl.exe and netio.sys

Hi,

The attached DMP file is of the KMODE_EXCEPTION_NOT_HANDLED (1e) bug check.

This indicates that a kernel-mode program generated an exception which the error handler did not catch.


Code:

0: kd> k
Child-SP RetAddr Call Site
fffff800`00b9b1f8 fffff800`02e705be nt!KeBugCheck
fffff800`00b9b200 fffff800`02ea375d nt!KiKernelCalloutExceptionHandler+0xe
fffff800`00b9b230 fffff800`02ea2535 nt!RtlpExecuteHandlerForException+0xd
fffff800`00b9b260 fffff800`02eb34c1 nt!RtlDispatchException+0x415
fffff800`00b9b940 fffff800`02e78242 nt!KiDispatchException+0x135
fffff800`00b9bfe0 fffff800`02e76b4a nt!KiExceptionDispatch+0xc2
fffff800`00b9c1c0 fffff880`0194e06e nt!KiGeneralProtectionFault+0x10a
fffff800`00b9c358 fffff880`01a8ae53 NETIO!RtlGetNextExpiredTimerWheelEntry+0x5e
fffff800`00b9c360 fffff880`01a870b6 tcpip!TcpProcessExpiredTimeWaitTcbTimers+0x83
fffff800`00b9c3b0 fffff800`02e8385c tcpip!TcpPeriodicTimeoutHandler+0x349
fffff800`00b9c430 fffff800`02e836f6 nt!KiProcessTimerDpcTable+0x6c
fffff800`00b9c4a0 fffff800`02e835de nt!KiProcessExpiredTimerList+0xc6
fffff800`00b9caf0 fffff800`02e833c7 nt!KiTimerExpiration+0x1be
fffff800`00b9cb90 fffff800`02e708ca nt!KiRetireDpcList+0x277
fffff800`00b9cc40 00000000`00000000 nt!KiIdleLoop+0x5a
We can see various network related routines - tcpip.sys, NETIO.sys (Network I/O Subsystem), etc. With this said, something 3rd-party is likely causing NETBIOS conflicts.

-------------------

1. AppleCharger.sys is listed and loaded which is the GIGABYTE On/Off Charge driver. See here for details - GIGABYTE ON/OFF Charge

Very troublesome software, so please uninstall ASAP!

2. Remove and replace Norton with Microsoft Security Essentials for temporary troubleshooting purposes as it's very likely causing NETBIOS conflicts:

Norton removal - https://support.norton.com/sp/en/us/home/current/solutions/kb20080710133834EN_EndUserProfile_en_us;jsessionid=841A6D40BA6872C47697C6C6B19C8E11.4?entsrc=redirect_pubweb&pvid=f-home

MSE - Microsoft Security Essentials - Microsoft Windows

Regards,

Patrick

http://www.techsupportforum.com/forums/f299/solved-bsod-ntoskrnl-exe-and-netio-sys-832978.html
Relevancy 62.78%

As you can tell by the title, I have experienced numerous BSOD while using uTorrent. This has been happening almost every time I download with utorrent for the past 5 months. The torrent download will start and then a few minutes later my computer crashes.
I have been looking around and saw this was likely a driver problem, so i tried to download new network drivers, but another BSOD occurred.

Using BlueScreenView I saw the uTorrent crash was due to NETIO.SYS driver and the more recent BSOD due to the ntoskrnl.exe driver. The dump info is attached, please help!

System info:
Computer: Dell Inspiron N4110
Processor: Intel Core i5-2410M CPU @ 2.3 GHz
4 GB RAM
Running Windows 7 Home Premium 64 bit

A:BSOD with uTorrent; ntoskrnl.exe and NETIO.SYS

AVG is causing your crashes, I don't know why exactly. It's definitely the culprit though.

http://www.sevenforums.com/bsod-help-support/256475-bsod-utorrent-ntoskrnl-exe-netio-sys.html
Relevancy 62.78%

Hello,

Please help. I experience frequent crashes; rarely in game, sometimes using Citrix for work, sometimes running vsphere but mostly websurfing using chrome or IE. I rarely can go 12 hours without crash.

All dumps with Driver Verifier on
Tried ATI driver removal and driver install only
Removed Citrix drivers
Removed overclocking utility tool
Memory is in the approved vendor list for my motherboard

Attached file as advised in the posting guide. Thank you to whoever takes their time to even consider looking at this

Good hunting.

A:netio.sys & ntoskrnl.exe mostly browsing web using chrome

If you haven't turned Driver Verifier off - please do so at this time. To do this, open up verifier.exe and select "Delete existing settings", then click on Finish and reboot the system for the changes to take effect.

The BSOD's point to both networking items and video items.
You also have very old drivers for your Logitech and Creative drivers.

Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. If it's related to a hardware device, then physically remove the device from the system after uninstalling the program responsible for it's drivers. DO NOT manually delete/rename the driver as it may make the system unbootable! :

ctac32k.sys Wed Jul 2 04:38:22 2008 (486B3E7E)
Creative Audio Driver}Creative Worldwide Support
http://www.carrona.org/drivers/driver.php?id=ctac32k.sys

LGVirHid.sys Mon Nov 23 20:36:48 2009 (4B0B38B0)
Logitech Gamepanel Virtual HID Device Driver}</title> <meta content="" name="Search_category" /> <meta content="" name="Search_title" /> <style> /* BEGIN Messaging */ .message { background-color: #ffc; border-style: solid; border-radius: 4px; border-width: 1px; color: #000; padding: 6px 8px 6px
http://www.carrona.org/drivers/driver.php?id=LGVirHid.sys

LGBusEnum.sys Mon Nov 23 20:36:48 2009 (4B0B38B0)
Logitech Keyboard}</title> <meta content="" name="Search_category" /> <meta content="" name="Search_title" /> <style> /* BEGIN Messaging */ .message { background-color: #ffc; border-style: solid; border-radius: 4px; border-width: 1px; color: #000; padding: 6px 8px 6px
http://www.carrona.org/drivers/driver.php?id=LGBusEnum.sys

AxtuDrv.sys Thu May 19 03:42:38 2011 (4DD4C9EE)
Most likely the AsRock Extreme Tuner.[br]Driver found in C:\Windows\SysWOW64\Drivers\AxtuDrv.sys[br]}http://www.asrock.com/support/downlo...?cat=Utilities
http://www.carrona.org/drivers/driver.php?id=AxtuDrv.sys

Beyond this I have these 4 suggestions:
1. Get ALL available Windows Updates. It may take several trips to get them all
2. Get ALL available, Win8.1 compatible updates from the manufacturer's website.
3. Start with these free hardware diagnostics: http://www.carrona.org/hwdiag.html
4. If all of the hardware tests pass, then run Driver Verifier according to these instructions: http://www.carrona.org/verifier.html

Analysis:
The following is for informational purposes only.

Code:
**************************Tue Apr 14 00:47:15.759 2015 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\041415-15703-01.dmp]
Windows 8 Kernel Version 9600 MP (12 procs) Free x64
Built by: 9600.17668.amd64fre.winblue_r8.150127-1500
System Uptime:0 days 0:08:22.579
Probably caused by :NETIO.SYS ( NETIO!RtlGetNextExpiredTimerWheelEntry+cd )
BugCheck 1E, {ffffffffc0000005, fffff801bdc0820c, 0, ffffffffffffffff}
BugCheck Info: KMODE_EXCEPTION_NOT_HANDLED (1e)
Arguments:
Arg1: ffffffffc0000005, The exception code that was not handled
Arg2: fffff801bdc0820c, The address that the exception occurred at
Arg3: 0000000000000000, Parameter 0 of the exception
Arg4: ffffffffffffffff, Parameter 1 of the exception
BUGCHECK_STR: 0x1E_c0000005_R
PROCESS_NAME: System
FAILURE_BUCKET_ID: 0x1E_c0000005_R_NETIO!RtlGetNextExpiredTimerWheelEntry
CPUID: "Intel(R) Core(TM) i7-3930K CPU @ 3.20GHz"
MaxSpeed: 3200
CurrentSpeed: 3200
BIOS Version P3.10
BIOS Release Date 04/16/2014
Manufacturer To Be Filled By O.E.M.
Baseboard Manufacturer ASRock
Product Name To Be Filled By O.E.M.
Baseboard Product X79 Extreme6
????????????????????????????????????????????????????????????????... Read more

http://www.eightforums.com/bsod-crashes-debugging/64468-netio-sys-ntoskrnl-exe-mostly-browsing-web-using-chrome.html
Relevancy 62.78%

Hi,

I started getting BSODs while torrenting roughly a week ago. The only thing I changed at that point was installing razer synapse drivers which I have since removed. The BSODs happen between 1-3 times a day, at pretty random times. I've uploaded the two most recent dumps, any help would be much appreciated. Thanks in advance.

A:BSOD netio.sys and ntoskrnl.exe while torrenting

Please fully follow: Blue Screen of Death (BSOD) Posting Instructions

http://www.sevenforums.com/bsod-help-support/315558-bsod-netio-sys-ntoskrnl-exe-while-torrenting.html
Relevancy 62.78%

Hello My name is Stefan I've recently bought a Dell laptop and from the start I had problems that resulted in crashes The first one was related to the NETIO.sys BSODs causes videocard driver but it got fixed after updating the bios and updating the videocard drivers The nd one related to the wifi adapter is still unsolved despite running test updating drivers and talking with the guys from tech support They recommended me to re-install windows and all the drivers NETIO.sys causes BSODs as that might solve the problem but I want to be sure of NETIO.sys causes BSODs that solution before doing it and loosing any data The laptop is a Dell Inspiron R SE model no OS Windows OEM bit the one originally installed CPU Intel i - M Video NETIO.sys causes BSODs card It has two from what I understand There's a shared memory one Intel HD MB and a dedicated one AMD Radeon M Gb There is a switchable graphics software that changes the videocard used when there's a need for more resources Power supply Dell Wh System manufacturer Dell Inc Model Inspiron I don't have a system health report because quot An error occured while attempting to generate the report quot I need help with this issue 'cause it keeps bsod-ing I think that it is related to the wifi card but I don't know how to solve it Usually the system crashes when I am downloading something over the internet When I play a game Star wars Force Unleashed COD MW it doesn't give me any BSOD but as soon as I start downloading something it crashes Everytime is the same cause NETIO sys I need some help Thank you Regards Stefan

http://www.techsupportforum.com/forums/f299/netio-sys-causes-bsods-665350.html
Relevancy 62.35%

I have recently installed uTorrent 3.1.3 and it runs cleanly for a day and then blue screens the next day.
I installed bluescreenview and found the mentioned files/drivers crashed and caused the BSOD.
I am only using Windows Live Essentials and my wireless driver is up to date.
What is causing this crash and how do I fix it?
I have never has this problem with uTorrent 3.1.2

The following is the crash dump thingy

==================================================
Dump File : 051912-20155-01.dmp
Crash Time : 19/05/2012 14:32:40
Bug Check String : DRIVER_IRQL_NOT_LESS_OR_EQUAL
Bug Check Code : 0x000000d1
Parameter 1 : 00000000`00000028
Parameter 2 : 00000000`00000002
Parameter 3 : 00000000`00000000
Parameter 4 : fffff880`01611b2d
Caused By Driver : NETIO.SYS
Caused By Address : NETIO.SYS+11b2d
File Description :
Product Name :
Company :
File Version :
Processor : x64
Crash Address : ntoskrnl.exe+7f1c0
Stack Address 1 :
Stack Address 2 :
Stack Address 3 :
Computer Name :
Full Path : C:\windows\Minidump\051912-20155-01.dmp
Processors Count : 4
Major Version : 15
Minor Version : 7601
Dump File Size : 262,144
==================================================

A:BSOD due to netio.sys and ntoskrnl.exe crashing while using uTorrent

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.
Please attach the DMP files to your next post not to post one.

If you are overclocking STOP

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.


To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

http://www.sevenforums.com/drivers/230549-bsod-due-netio-sys-ntoskrnl-exe-crashing-while-using-utorrent.html
Relevancy 62.35%

Guys I encountered multiple BSODs, It happens when I'm just surfing the net, games or sometimes even just by watching videos/movies.

I'am just a novice in troubleshooting with drivers and just follow steps on this forum and other suggestions, some driver caused BSOD already stopped from reoccurring(Thanks guys), but I'am stuck on finding the source of this new BSODs your help is really appreciated.

Here's my file N550-Mon_05_25_2015_120543_46.zip

A:Multiple BSOD (ntoskrnl.exe, NETIO.SYS, dxgmms1.sys)

Update: I do a clean install, and re-update all of my drivers and software, also uninstall some bloatware from ASUS, now I BSOD when watching video, or when there's .gif on my webpage, also chrome usually crashed.

where is my updated Logs.
N550-Tue_06_02_2015_153515_99.zip

http://www.eightforums.com/bsod-crashes-debugging/66398-multiple-bsod-ntoskrnl-exe-netio-sys-dxgmms1-sys.html
Relevancy 62.35%

I have been getting BSOD since 15 April. It is quite bad, for example in past 1,5 hours the computer has BSOD'd 6 times. Seems to be totally random, although in past 1,5 hours I have not done anything else than used Chrome to find a solution for the problem. It also crashed when I used first time the Log Collector, although in that case it just went completely dark and froze.

Thanks in advance,
vello

A:BSOD netio.sys ntoskrnl.exe mostly 00000000'00000008

Hello vello9999, and welcome to the forums. I am going to need you to do a few things for me.

First the files you uploaded are completely empty. Please run the www.sevenforums.com/bsod-help-support/96879-blue-screen-death-bsod-posting-instructions.html#option2 again. I know you are having problems, but we need those files to be able to see what is going on.

Please fill out your system specs in as much detail as possible, complete with the Manufacturer and model of the components. We often have to look up components and need that info. Please also include your PSU and CPU cooler as well. Hopefully this will help you.

Please fill out your System Specs


   Information
Your System Specs will help us to help you, and doing it in this manner will make them available to all helpers in every post and keep us from hunting for them. We ask that you fill them out in as much detail as possible including Desktop or Laptop, Model number if it is an OEM computer and all components with the Manufacturer and Model number if possible.

If you will go to your last post and click the 'System Specs' in the bottom left of the post, you will find a link to update your system specs. Please fill those out in as much detail as possible, making sure to click save at the bottom of the page. If you would like to know what we would like, you can click 'My System Specs' at the bottom left of this post to see mine. If you do not know what your components are, this will help you accomplish this task. System Info - See Your System Specs
Please monitor your CPU and GPU temps closely.

If you can please open an elevated command prompt ( click start, type cmd in the search box, right click on the cmd entry and select run as administrator) in the black box that opens, copy/paste sfc /scannow. If you decide to type it, notice the space between the sfc and the /. It is a system file checker which will scan your system files and attempt to correct any missing or corrupt files. What we want are the results to say windows found no integrity violations. If it says files were found but could not be repaired, close the box, reboot and run it again, after opening the administrative command prompt. You may have to reboot and run it three times for it to repair all system files. If it can't repair them after 3 reboots, let us know.

Also try and make sure your computer is configured for Small Memory Dumps Dump Files - Configure Windows to Create on BSOD

http://www.sevenforums.com/bsod-help-support/367695-bsod-netio-sys-ntoskrnl-exe-mostly-0000000000000008-a.html
Relevancy 62.35%

I got a blue screen when I turn off my computer I attach the minidump files Blue ntoskrnl.exe 7 NETIO.SYS Windows and Screen I ran quot sfc scannow quot and all is fine Any idea about that Blue Screen Windows 7 NETIO.SYS and ntoskrnl.exe error thanks Dump File - - dmp Crash Time p m Bug Check String DRIVER CORRUPTED EXPOOL Bug Check Code x c Parameter Parameter Parameter Parameter fffff ff e Caused By Driver NETIO SYS Caused By Address NETIO SYS c File Description Product Name Company File Version Processor x Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File - - dmp Crash Time p m Bug Check Blue Screen Windows 7 NETIO.SYS and ntoskrnl.exe String DRIVER CORRUPTED EXPOOL Bug Check Code x c Parameter Parameter Parameter Parameter fffff faa e Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win gdr - Processor x Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version

A:Blue Screen Windows 7 NETIO.SYS and ntoskrnl.exe

I got a new blue screen:

==================================================
Dump File : 042910-15459-01.dmp
Crash Time : 04/29/2010 05:16:53 p.m.
Bug Check String : IRQL_NOT_LESS_OR_EQUAL
Bug Check Code : 0x0000000a
Parameter 1 : 00000000`0000000e
Parameter 2 : 00000000`00000002
Parameter 3 : 00000000`00000001
Parameter 4 : fffff800`02eee31b
Caused By Driver : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+70600
File Description : NT Kernel & System
Product Name : Microsoft? Windows? Operating System
Company : Microsoft Corporation
File Version : 6.1.7600.16539 (win7_gdr.100226-1909)
Processor : x64
Computer Name :
Full Path : C:\Windows\Minidump\042910-15459-01.dmp
Processors Count : 4
Major Version : 15
Minor Version : 7600
==================================================

http://www.sevenforums.com/bsod-help-support/81630-blue-screen-windows-7-netio-sys-ntoskrnl-exe.html
Relevancy 61.49%

Windows 10 Pro x64, browsing Facebook in Chrome when I got a BSOD for system service exception netio.sys

Following next login I ran BlueScreenView and it seems to think ntoskrnl.exe is related. Googling leads me to solutions mentioning ASUS ROG GameFirst but that isn't installed as far as I know. Other ideas also didn't pan out. You guys seem to be be excellent debuggers so I'm trying my luck here. I've also attached the BlueScreenView results as a plain text file.

http://www.tenforums.com/bsod-crashes-debugging/62764-netio-sys-bsod-blue-screen-view-also-says-ntoskrnl.html
Relevancy 61.49%

I'm having random BSOD's on my HP pavilion dv6 2140ef with Windows 7 64-bit.
- There seems to be no particular pattern to the crashes...twice a day in the average, not tied to any particular activity.
- I've tested the memory, using recommended tools and the memory is fine.
- I've checked for my drivers, particularly networking drivers but they are all in their most recent version.
- With WinDBG Debugger, I've analyzed my big memory.dmp file (about 650 Mb), and I give you the report, named "Debugging Memorydump Report"
- All dump files seem to point to netio.sys, tied to NETw5s64.sys and vsdatant.sys
- The two last minidump files are zipped and attached too

Thanks for your help!

A:BSODs:NETw5s64.sys,vsdatant.sys,netio.sys, what to do?

  
Quote: Originally Posted by Sami


I'm having random BSOD's on my HP pavilion dv6 2140ef with Windows 7 64-bit.
- There seems to be no particular pattern to the crashes...twice a day in the average, not tied to any particular activity.
- I've tested the memory, using recommended tools and the memory is fine.
- I've checked for my drivers, particularly networking drivers but they are all in their most recent version.
- With WinDBG Debugger, I've analyzed my big memory.dmp file (about 650 Mb), and I give you the report, named "Debugging Memorydump Report"
- All dump files seem to point to netio.sys, tied to NETw5s64.sys and vsdatant.sys
- The two last minidump files are zipped and attached too

Thanks for your help!


Well your problems are coming from several sources.
1-Old drivers that date back to 2005
2- corrupt system files (run a system file check (sfc /scannow)
3-your RAID

I would update the drivers (including and especially the raid driver) and run sfc /scannow

Let us know if you need help

Ken
OLD DRIVERS THAT NEED TO BE UPDATED

Code:
iirsp.sys fffff880`01687000 fffff880`01698000 0x00011000 0x439f418a 12/13/2005 5:47:54 PM
nfrd960.sys fffff880`018de000 fffff880`018ee000 0x00010000 0x4485ef94 6/6/2006 5:11:48 PM
secdrv.SYS fffff880`08ec3000 fffff880`08ece000 0x0000b000 0x4508052e 9/13/2006 9:18:38 AM
adpu320.sys fffff880`0172d000 fffff880`0175c000 0x0002f000 0x45e4c6ff 2/27/2007 8:04:15 PM
adpahci.sys fffff880`016d7000 fffff880`0172d000 0x00056000 0x46377921 5/1/2007 1:30:09 PM
arc.sys fffff880`017cc000 fffff880`017e5000 0x00019000 0x4656035b 5/24/2007 5:27:55 PM
PxHlpa64.sys fffff880`01bf2000 fffff880`01bfdae0 0x0000bae0 0x475dd06d 12/10/2007 7:49:01 PM
adfs.SYS fffff880`05000000 fffff880`05018000 0x00018000 0x48640195 6/26/2008 4:52:37 PM
SiSRaid2.sys fffff880`01bc2000 fffff880`01bd0000 0x0000e000 0x48da86c4 9/24/2008 2:28:20 PM
sisraid4.sys fffff880`01bd0000 fffff880`01be8000 0x00018000 0x48e3f1f4 10/1/2008 5:56:04 PM
adp94xx.sys fffff880`01200000 fffff880`0127b000 0x0007b000 0x4939bf42 12/5/2008 7:54:42 PM
lsi_fc.sys fffff880`01698000 fffff880`016b7000 0x0001f000 0x493ef531 12/9/2008 6:46:09 PM
arcsas.sys fffff880`017e5000 fffff880`01800000 0x0001b000 0x496e3ca9 1/14/2009 3:27:37 PM
ql2300.sys fffff880`01a1e000 fffff880`01bc2000 0x001a4000 0x4978fba2 1/22/2009 7:05:06 PM
vsmraid.sys fffff880`01978000 fffff880`019a2000 0x0002a000 0x4983a701 1/30/2009 9:18:57 PM
elxstor.sys fffff880`01600000 fffff880`01687000 0x00087000 0x4988ca9b 2/3/2009 6:52:11 PM
stexstor.sys fffff880`01be8000 fffff880`01bf2000 0x0000a000 0x499b4248 2/17/2009 7:03:36 PM
amdsbs.sys fffff880`0177a000 fffff880`017c1000 0x00047000 0x49c3e213 3/20/2009 2:36:03 PM
iaStorV.sys fffff880`01299000 fffff880`013b7000 0x0011e000 0x49dcd76d 4/8/2009 12:57:17 PM
lsi_scsi.sys fffff880`013b7000 fffff880`013d6000 0x0001f000 0x49e7ad9e 4/16/2009 6:13:50 PM

http://www.sevenforums.com/bsod-help-support/78592-bsods-netw5s64-sys-vsdatant-sys-netio-sys-what-do.html
Relevancy 60.63%

I bought lenovo z580 with core i5 and 1gb gt 630 a week back only and now from past two days its showing constant bsod. and the file for the reason shown is NETIO.SYS.
I have attached the DUMP files along. please check them out and help me. m really worried as it is my first and completely new laptop.
I m running 64 bit win 7 ultimate on this machine
please help...!!!!
 

http://www.techspot.com/community/topics/new-lenovo-z580-constantly-bsods-netio-sys.183175/
Relevancy 60.63%

Over the last week or so I've had BSODs out of which most signified errors with tcpip sys and netio sys I followed the advice of a user with a similar problem and set up a static IP through the IPv properties of my network adapter which was a potential solution for fixing the common and most culprits tcpip.sys BSODs- netio.sys the netio sys problem This seems to have worked for BSODs- tcpip.sys and netio.sys the most common culprits the most part as I haven't had any netio sys-related errors since I made the change but tcpip sys has remained an issue Attached are the minidumps from the last two days I've tried parsing them myself but my WinDbg skills are only a couple days old and as such are considerably lacking Even so I couldn't find any common link between the errors driver program or otherwise except for the fact that my computer was performing some sort of network activity when it occurred To try and head off the most common initial questions I know that tcpip sys and netio sys BSODs- tcpip.sys and netio.sys the most common culprits errors routinely come from problems with security firewall products The only such application I'm running is Microsoft Security Essentials Nothing else Also I've changed out my RAM twice since this system was built about days ago and while I haven't run a thorough MemTest on these modules the errors I got on my one pass compared to the I got on my one pass with the last set are certainly heartening That's not to say that this couldn't be a hardware problem as I'm planning to test each module in each slot over the next couple days but I figured I'd start by taking my BSODs at face value and asking here I'd appreciate any help you all could provide

A:BSODs- tcpip.sys and netio.sys the most common culprits

You've done most everything already. It's a networking error - so now it's just a matter of determining where the error exists. It can be security/firewall related, but it can also be the drivers, cabling, other components of the networking stack (such as WinSock issues), etc, etc, etc.

Also, with the MemTest, run it for a minimum of 3 passes - but overnight is better.
A more detailed explanation is here: Memory Diagnostics

One of the errors is a STOP 0x109 (BSOD Index)
Please note (at the above link) the probably causes for this error - device drivers or memory are most likely.

Also, Please update or remove these older drivers that were loaded at the time of the crash. Don't use Windows Update or the Update drivers function of Device Manager. Please use the following instructions to locate the most current drivers:





Quote:
How To Find Updated Drivers:
- search Google for the name of the driver
- compare the Google results with what's installed on your system to figure out which device/program it belongs to
- visit the web site of the manufacturer of the hardware/program to get the latest WIN7 drivers (DON'T use Windows Update or the Update driver function of Device Manager).
- if there are difficulties in locating them, post back with questions and someone will try and help you locate the appropriate program.


- some driver links are on this page: http://www.carrona.org/drvrdown.html

Here's the older drivers (please note that one is a NETWORK driver):

Code:
000.fcl Fri Sep 26 09:11:22 2008 - Cyberlink DVD program
WN111v2x.sys Thu Sep 25 04:27:48 2008 - NetGear or DLink USB Network Adapter
Once this is done, please monitor for further BSOD's.

Here's a summary of the BSOD's:

Code:
BugCheck A, {c0000, 2, 1, fffff80002d0cc22}
Probably caused by : NETIO.SYS ( NETIO!WfppIncrementIndexAndPurgeEntries+47 )
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
BugCheck 1A, {41287, 65e0000, 0, 0}
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+42c75 )
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
BugCheck 50, {ffffffffffffffc8, 1, fffff880013abcf4, 0}
Probably caused by : memory_corruption
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
BugCheck 3B, {c0000005, 1b941000001, fffff88005f76a10, 0}
Probably caused by : ntkrnlmp.exe ( nt!KiSystemServiceHandler+7c )
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
BugCheck D1, {6bff, 2, 0, fffff8800185d1ec}
Probably caused by : memory_corruption
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
BugCheck 3B, {c0000005, fffff8800184a1ed, fffff880078aa9e0, 0}
Probably caused by : memory_corruption
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
BugCheck 109, {a3a039d895f4d60c, b3b7465ee872b502, fffff880017a6110, 1}
Probably caused by : memory_corruption
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
BugCheck 50, {fffff88007cb65e8, 0, fffff88000c2e13e, 2}
Probably caused by : memory_corruption
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
BugCheck D1, {fffff5000e51366f, 2, 1, fffff880017af382}
Probably caused by : memory_corruption
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
BugCheck 1000007E, {ffffffffc000001d, fffff88001743ece, fffff880035ca618, fffff880035c9e70}
Probably caused by : memory_corruption
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
BugCheck D1, {fffff80001767620, 2, 8, fffff80001767620}
Probably caused by : tcpip.sys ( tcpip!UdpDeliverDatagrams+173 )

http://www.sevenforums.com/bsod-help-support/57101-bsods-tcpip-sys-netio-sys-most-common-culprits.html
Relevancy 58.05%

Hey guys so I've been getting some random BSOD errors every few days or so I usually leave my computer on when I am at work or sleep and either when I come home Random BSOD error ntoskrnl.exe (address driver ntoskrnl.exe+74ec0) or wake up my computer is off So I turn it on and it says that the computer didn't Random BSOD error driver ntoskrnl.exe (address ntoskrnl.exe+74ec0) shut down properly when I start up I downloaded the BlueScreenView and noticed I've had some BSOD three times within days One Random BSOD error driver ntoskrnl.exe (address ntoskrnl.exe+74ec0) was a PAGE FAULT IN NONPAGED AREA error which I believe was a RAM problem i bought new RAM and installed it plus OCed it to but I believe it was making my system unstable so I reset the speed to default and haven't gotten that error again but after that I've gotten two IRQL NOT LESS OR EQUAL errors related to ntoskrnl exe I did some research online and from what I read it could be a number of problems I'm just not sure where to start and could really use some guidance and advice I uploaded my dmp files for anyone who knows how to look at these Thank in advance

A:Random BSOD error driver ntoskrnl.exe (address ntoskrnl.exe+74ec0)

Welcome to 7F. I'll take a look at your dumps and see if I can get you BSOD free.


One

 NETGEAR NEUTRAL WIRELESS SOLUTION

Your Netgear Neutral Wireless Solution driver has been flagged. It is quite old a could probably do with updating. Check for updates here
Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {0, 2, 1, fffff800034c88ac}

*** WARNING: Unable to verify timestamp for scmndisp.sys
*** ERROR: Module load completed but symbols could not be loaded for scmndisp.sys
Probably caused by : scmndisp.sys ( scmndisp+16d1 )

Followup: MachineOwner
---------

1: kd> lmvm scmndisp
start end module name
fffff880`0188b000 fffff880`01895000 scmndisp T (no symbols)
Loaded symbol image file: scmndisp.sys
Image path: \SystemRoot\system32\DRIVERS\scmndisp.sys
Image name: scmndisp.sys
Timestamp: Fri May 27 11:30:22 2011 (4DDF7D3E)
CheckSum: 00009C0C
ImageSize: 0000A000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4


Two

 HARDWARE DIAGNOSTICS

A few of your dumps (0x50, 0x124) are pointing towards hardware errors. 0x124s are usually always hardware errors but rarely give us an indication of what the problem actually is. In this case we may have struck lucky as this particular one shows up ASUS AI Suite III. The utilities listed below are the ones I'm concerned about.Attachment 353971


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa800752d028, Address of the WHEA_ERROR_RECORD structure.
Arg3: 00000000bf800000, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000000000124, Low order 32-bits of the MCi_STATUS value.

Debugging Details:
------------------
BUGCHECK_STR: 0x124_GenuineIntel

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

PROCESS_NAME: AISuite3.exe

CURRENT_IRQL: f

ANALYSIS_VERSION: 6.3.9600.17029 (debuggers(dbg).140219-1702) amd64fre
We have seen motherboard packaged utilities cause 0x124s in the past and it could be the case here.
Uninstall ASUS AI Suite III and test the system for stability.
Run SeaTools to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use
Download and run MemTest86+ to test your RAM. RAM - Test with Memtest86+


   Note
Attachment 353972 Run MemTest86+ for at least 8 passes. Ideally set it off before you go to bed and leave it overnight, we're looking for zero errors here. A single error will show something's going bad with your RAM.


Three

 NVIDIA GPU

You've also received a 0x116 which is a VIDEO_TDR_ERROR (Timeout Detection & Recovery) which means your GPU driver has crashed and has failed to recover in time. This could be down to the driver, the card itself or possibly the power to the card.
Code:
******************************************************************************... Read more

http://www.sevenforums.com/bsod-help-support/365399-random-bsod-error-driver-ntoskrnl-exe-address-ntoskrnl-exe-74ec0.html
Relevancy 57.62%

I'm getting random Blue Screens and can't figure out why. I'm not running any hardcore programs. I'm mostly just using Microsoft Office and Firefox. The BSOD's seem to happen when I'm in Outlook, Excel or Firefox. Haven't been able to determine exactly which at the time as I'm moving back and forth between them quite often.

I've tried the SFC command and it didn't find anything. I used BlueScreenViewer but not a lot of help. All drivers for sound and video have been updated. I've also updated the firmware to the Crucial M4 SSD version 040H.

Any insight would be great.

Specs:
Laptop - HP EliteBook 8560w
CPU - Intel i7-2670QM
RAM - Hynix/Hyundai 8.0 GB Ram
SSD - M4-CT256M4 SSD
Audio - AMD High Definition Audio
Video - AMD FirePro M5950
OS - Windows 7 Pro 64-bit

A:Random BSOD Reporting ntoskrnl.exe+75c40 & ntoskrnl.exe+7efc0

Update the firmware of your Crucial M4-CT256M4SSD2.

And, Uninstall McAfee Using McAfee Removal Tool. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.
Download, install and update those, and then run full system scans with both of them, one by one.

Free up the startup.
Click on the Start button
Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the “Startup” tab.
Deselect all items other than the antivirus and touchpad driver SynTPEnh.
Apply > OK
Accept then restart.
Let us know the results.

http://www.sevenforums.com/bsod-help-support/281927-random-bsod-reporting-ntoskrnl-exe-75c40-ntoskrnl-exe-7efc0.html
Relevancy 57.62%

BSOD random, probably under heavy load situations. I dont know how to do.


DM log collector file attached

many thanks

A:BSOD random most times ntoskrnl.exe+748c0 and ntoskrnl.exe+74ec0

Hi berdini.


Code:
DEFAULT_BUCKET_ID: GS_FALSE_POSITIVE_MISSING_GSFRAME
Scan the system for possible virus infection with the following programs.
Anti-rootkit utility TDSSKiller
Windows Defender Offline
Let us know the results.
____________________________________

Code:
BugCheck F7, {fffff8800a01ff08, f8800125d135, ffff077ffeda2eca, 0}

Probably caused by : Ntfs.sys ( Ntfs!_report_gsfailure+26 )

Followup: MachineOwner
---------

http://www.sevenforums.com/bsod-help-support/373211-bsod-random-most-times-ntoskrnl-exe-748c0-ntoskrnl-exe-74ec0.html
Relevancy 56.76%

i have been fightin with it for days but i still can't find a solution to it... Here's the dmp file....

A:NETIO.sys RANDOM CRASHES

It is difficult to find patterns with only one .dmp file. If the below recommendations do not help with your problem, please follow the http://www.techsupportforum.com/foru...ta-452654.html to provide us with more information so we can help you with better troubleshooting steps.

Recommendations:
Crashes may be due to bcmwl63.sys. Determine what driver that is, likely your wireless driver, and then update it from the manufacturer's site. The manufacturer should be either the wireless device manufacturer or your PC manufacturer.

Without the blue screen reports asked for in the above link, I cannot provide more assistance than that. Those reports help us to determine what hardware you have installed so we can provide better help and help you find the appropriate update for the device.


I also recommend you update/replace/remove the following drivers:

HECI.sys Tue Oct 19 17:33:38 2010 (4CBE2AD2)
Intel Management Engine Interface
http://www.carrona.org/drivers/driver.php?id=HECI.sys

Rt630x86.sys Wed Oct 19 06:13:13 2011 (4E9EBED9)

Rt630x86.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.


To update drivers, make sure to download the drivers from the manufacturer and not using 3rd party programs. Your drivers should be found from your motherboard support site (ASUS, Gigabyte, MSI, etc.) or your vendor support site (Dell, HP, Toshiba, Sony, etc.) first. If you have devices you bought yourself, the drivers for those devices need to be downloaded from the manufacturer support site for those devices. If you need help, let us know.

To remove drivers, do so by uninstalling the device or software associated with the driver. Devices can be uninstalled through device manager, and then the device itself should be physically removed from the system if possible.

3rd Party Drivers: The following is for information purposes only. My recommendations were given above. The drivers that follow belong to software or devices that were not developed by Microsoft. Any drivers in red should be updated/replaced/removed. You can find links to the driver information and where to update the drivers in the section after the code box:

Code:
**************************Fri Nov 16 12:03:00.739 2012 (GMT-7)**************************
HECI.sys Tue Oct 19 17:33:38 2010 (4CBE2AD2)
Rt630x86.sys Wed Oct 19 06:13:13 2011 (4E9EBED9)
RtsUStor.sys Fri Mar 2 01:06:49 2012 (4F507F99)
bcmwl63.sys Tue Mar 13 18:27:51 2012 (4F5FE607)
Apfiltr.sys Wed Jul 11 07:54:16 2012 (4FFD8588)
intelppm.sys Wed Jul 25 20:34:02 2012 (5010AC9A)
dump_storahci.sys Wed Jul 25 20:38:58 2012 (5010ADC2)
stwrt.sys Thu Aug 9 02:41:44 2012 (502377C8)
igdkmd32.sys Wed Sep 26 13:44:50 2012 (50635B32)

http://www.carrona.org/drivers/driver.php?id=HECI.sys
Rt630x86.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.
http://www.carrona.org/drivers/driver.php?id=RtsUStor.sys
bcmwl63.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.
http://www.carrona.org/drivers/driver.php?id=Apfiltr.sys
http://www.carrona.org/drivers/driver.php?id=intelppm.sys
http://www.carrona.org/drivers/driver.php?id=dump_storahci.sys
http://www.carrona.org/drivers/driver.php?id=stwrt.sys
http://www.carrona.org/drivers/driver.php?id=igdkmd32.sys


Analysis: The following is for information purposes only. The following information contains the relevant information from the blue screen analysis:

Code:
**************************Fri Nov 16 12:03:00.739 2012 (GMT-7)**************************
Loading Dump File [C:\Users\writhzid... Read more

http://www.techsupportforum.com/forums/f299/netio-sys-random-crashes-676051.html
Relevancy 56.76%

I have Random BSOD netio.sys.

Logs are attached

A:Random BSOD netio.sys

It apprars to be a network blockage resulting to a BSOD.

And two things are involved in it.

First, Fortinet FortiClient Antivirus Web Filter Driver

Code:
fffff880`0c10eec8 fffff880`08df5339Unable to load image \SystemRoot\system32\drivers\FortiWF2.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for FortiWF2.sys
*** ERROR: Module load completed but symbols could not be loaded for FortiWF2.sys
FortiWF2+0x3339
Second, Trend Micro WFP Callout Driver.

Code:
fffff880`0c10f018 fffff880`08c23ea5Unable to load image \SystemRoot\system32\DRIVERS\tmwfp.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for tmwfp.sys
*** ERROR: Module load completed but symbols could not be loaded for tmwfp.sys
tmwfp+0xcea5
I would suggest you to uninstall both the Fortinet FortiClient and Trend Micro. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.

Let us know for any further BSOD.

http://www.sevenforums.com/bsod-help-support/366018-random-bsod-netio-sys.html
Relevancy 55.9%

Hi,

I have been getting BSOD radomly. At first I thought it was overheating thats causing the problem. I cleaned the fan but it didn't stop. So I downloaded BlueScreenViewer and tried googling the issue. I could not fix the problem. Could anyone please help me?

I have tried to install all new drivers. All drivers are latest. I Used driver manager, not the one from windows.

These are the error codes. I have attached 4 latest the minidump files as well

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: d1
BCP1: 00000014
BCP2: 00000002
BCP3: 00000000
BCP4: 8C545BF2
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

A:Random BSOD caused by NETIO.sys

Welcome

Please upload your msinfo32.nfo file. To get this:
Click on the Start
Type msinfo32 into the Search programs and files box
When it opens, go to File, Save
Save as msinfo32.nfo and save in a place you will remember
Let it finish the process of gathering and saving the system info
Right click the .nfo file, click send to compressed (zipped) folder
Upload the .zip file here.

http://www.sevenforums.com/bsod-help-support/252675-random-bsod-caused-netio-sys.html
Relevancy 55.9%

Hi

I have a Thinkpad T410 and have been getting frequent random BSOD for a long time. I finally got it to create a mini dump by editing the registry directly as it would not save the setting under control panel.

The bluescreen view utility shows the problem is netio.sys and shows driver IRQL not less or equal.

I have downloaded and ran the SF Diagnostic Tools and hope the results are included here.

Thanks for any assistance.
All the best in 2013

A:Frequent random BSOD Netio.sys

Welcome to SevenForums.

Code:
Start Menu\Programs\Norton Steve-THINKPAD\Steve:Start Menu\Programs\Norton Steve-THINKPAD\Steve
Norton is known to cause BSOD-s, consider uninstalling it with the Norton Removal Tool and replace with Microsoft Security Essentials TO TEST.Norton Removal Tool
Microsoft Security Essentials. Recommended from a strict BSOD perspective, compatibility & stability compared to other antiviruses/internet security software. It is free and lightweight:-
Microsoft Security Essentials - Free Antivirus for WindowsMalwarebytes : Malwarebytes Anti-Malware removes malware including viruses, spyware, worms and trojans, plus it protects your computerGood and Free system security combination.


   Warning
Do not start the free trial of Malware Bytes; remember to deselect that option when prompted.


Run a full scan with both (separately) once downloaded, installed and updated.

Perform a System File Check:Click on the start
Type CMD on Search
Left click and Run as Administrator
Type SFC /scannow
Full tutorial here:SFC /SCANNOW Command - System File Checker
Disk Check on your hard drive for file system errors and bad sectors on it:Disk Check
System Optimisers

Please remove the following software

Code:
Start Menu\Programs\Advanced SystemCare 6 Public:Start Menu\Programs\Advanced SystemCare 6 Public
This software is a known cause of BSOD's. The windows 7 operating system does not require these registry cleaning software. They often tune-down rather than tune-up and can wreck the OS beyond repair. Microsoft have improved Windows 7 significantly and it is much better at organising and optimising itself than its predecessors. Check this, this and this thread for evidence.

If you feel the need to use a registry cleaning or optimisation software, most of us recommend the use of CCleaner - PC Optimization and Cleaning - Free Download but make sure you back up the registry before making letting ccleaner delete anything.

Go to this link: Intel? Driver Update Utility Check for latest updates, download and install all latest updates one by one.

Let us know the results.

Happy new year!

http://www.sevenforums.com/bsod-help-support/271621-frequent-random-bsod-netio-sys.html
Relevancy 55.9%

Hey everyone, first time here. I have been having BSOD when using firefox for a few months now on my toshiba laptop. I followed the instructions on how to post and i have attached the memory dumps to this thread. I even reinstalled windows but its still not working, the same message every time. If someone could help,that would be awesome and thanks.

A:Random BSOD When using firefox (NETIO.SYS)

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck D1, {8, 2, 0, fffff880017bea1d}

*** WARNING: Unable to verify timestamp for UrlFilter.sys
*** ERROR: Module load completed but symbols could not be loaded for UrlFilter.sys
Probably caused by : NETIO.SYS ( NETIO!CalloutStreamDataInit+1d )

Followup: MachineOwner
---------

2: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arguments:
Arg1: 0000000000000008, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff880017bea1d, address which referenced memory

Debugging Details:
------------------
READ_ADDRESS: GetPointerFromAddress: unable to read from fffff800032fd100
GetUlongFromAddress: unable to read from fffff800032fd1c0
0000000000000008 Nonpaged pool

CURRENT_IRQL: 2

FAULTING_IP:
NETIO!CalloutStreamDataInit+1d
fffff880`017bea1d 488b5808 mov rbx,qword ptr [rax+8]

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

BUGCHECK_STR: 0xD1

PROCESS_NAME: IMF.exe

TRAP_FRAME: fffff8800ad08ce0 -- (.trap 0xfffff8800ad08ce0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000000 rbx=0000000000000000 rcx=fffffa8004fe89f0
rdx=fffffa80082767a0 rsi=0000000000000000 rdi=0000000000000000
rip=fffff880017bea1d rsp=fffff8800ad08e70 rbp=fffffa8008276770
r8=fffff8800ad08ef0 r9=0000000000000000 r10=0000000000000265
r11=000000000000013c r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei ng nz na pe nc
NETIO!CalloutStreamDataInit+0x1d:
fffff880`017bea1d 488b5808 mov rbx,qword ptr [rax+8] ds:00000000`00000008=????????????????
Resetting default scope

LAST_CONTROL_TRANSFER: from fffff800030c5169 to fffff800030c5bc0

STACK_TEXT:
fffff880`0ad08b98 fffff800`030c5169 : 00000000`0000000a 00000000`00000008 00000000`00000002 00000000`00000000 : nt!KeBugCheckEx
fffff880`0ad08ba0 fffff800`030c3de0 : fffff880`0ad08d60 fffffa80`07856428 00000000`00000000 fffff880`0ad09090 : nt!KiBugCheckDispatch+0x69
fffff880`0ad08ce0 fffff880`017bea1d : fffffa80`04fe8a88 fffffa80`04fe8a80 00000000`00000001 fffff880`017d2807 : nt!KiPageFault+0x260
fffff880`0ad08e70 fffff880`017c80b4 : fffff880`0ad09090 fffff880`0ad09090 fffff880`0ad09290 fffff880`017c677d : NETIO!CalloutStreamDataInit+0x1d
fffff880`0ad08eb0 fffff880`017d3e78 : 00000000`00000000 fffff880`0ad09290 fffff880`0ad09040 fffff880`0ad090c8 : NETIO!StreamInvokeCalloutAndNormalizeAction+0x54
fffff880`0ad08f50 fffff880`017d4e71 : fffffa80`08276770 fffff880`0ad09290 fffff880`0ad09090 fffff880`0ad096e0 : NETIO!StreamCalloutProcessData+0x48
fffff880`0ad08fa0 fffff880`017d5ec8 : fffff880`0ad09090 fffff880`0ad096e0 fffff880`0ad09201 fffffa80`08276770 : NETIO!StreamCalloutProcessingLoop+0xa1
fffff880`0ad09030 fffff880`017b6a2a : fffff880`0ad09290 fffff880`0b443690 00000000`00000000 ff... Read more

http://www.sevenforums.com/bsod-help-support/316308-random-bsod-when-using-firefox-netio-sys.html
Relevancy 55.9%

Hi, for the last few days I've been getting quite a few random bsods that have pointed to either afd.sys or netio.sys. I'm not very tech savvy so I have no idea what this means. I've attached the files and performance report for someone to take a look at. Please, any help you could give me would be greatly appreciated.

Also, I'm not sure if this is the cause, but they seem to have started once I deleted avg antivirus. I'm using Windows 7 Premium 64bit

A:Random BSOD that seem to point to afd.sys and netio.sys

can someone please take a look at this for me? I'm not sure what to do, it's happening several times a day.

http://www.sevenforums.com/bsod-help-support/184025-random-bsod-seem-point-afd-sys-netio-sys.html
Relevancy 55.9%

I'm having random BSOD's on my wife's new Compaq CQ5210F with Windows 7 64-bit. Almost all dump files seem to point to netio.sys
There seems to be no particular pattern to the crashes...5 one day, none for a week, etc., not tied to any particular activity.
I've tested the memory overnight using recommended tools and the memory is fine. I've checked HP's site for updated networking drivers as the dumpfile seems to suggest a networking issue, but there are none newer than what it shipped with.
Thanks for your help!
Zipped minidump files attached.

A:Random BSOD's seeming to point to netio.sys

  
Quote: Originally Posted by charlesdhartman


I'm having random BSOD's on my wife's new Compaq CQ5210F with Windows 7 64-bit. Almost all dump files seem to point to netio.sys
There seems to be no particular pattern to the crashes...5 one day, none for a week, etc., not tied to any particular activity.
I've tested the memory overnight using recommended tools and the memory is fine. I've checked HP's site for updated networking drivers as the dumpfile seems to suggest a networking issue, but there are none newer than what it shipped with.
Thanks for your help!
Zipped minidump files attached.



Hey and welcome

Well it seems like you have two distinct types. Power State, and Kernal Mode Trap.
Power state is usually device like a drive, or usb device. Kernal mode trap is usually a driver.

Since you have tested the memory, and no signs of networking issues are epressed in the dmps You are going to have to start looking at them.
Start with a chkdsk/f for the HD
you can go here for more info. http://www.carrona.org/hddiag.html

let us know the results

Ken J+


Code:
122509-34101-01.dmp 12/25/2009 3:49:06 PM DRIVER_POWER_STATE_FAILURE 0x0000009f 00000000`00000003 fffffa80`022f9060 fffff800`00b9c518 fffffa80`05d9e1d0 ntoskrnl.exe ntoskrnl.exe+71f00
122609-15116-01.dmp 12/26/2009 10:28:20 AM DRIVER_POWER_STATE_FAILURE 0x0000009f 00000000`00000003 fffffa80`022f9060 fffff800`00b9c518 fffffa80`03383d30 ntoskrnl.exe ntoskrnl.exe+71f00
123009-16489-01.dmp 12/30/2009 3:11:14 PM DRIVER_POWER_STATE_FAILURE 0x0000009f 00000000`00000003 fffffa80`022f9060 fffff800`00b9c518 fffffa80`0283f0e0 ntoskrnl.exe ntoskrnl.exe+71f00
010410-16099-01.dmp 1/4/2010 8:31:16 AM DRIVER_POWER_STATE_FAILURE 0x0000009f 00000000`00000003 fffffa80`022f9060 fffff800`00b9c518 fffffa80`05e59260 ntoskrnl.exe ntoskrnl.exe+71f00
122809-15584-01.dmp 12/28/2009 7:39:48 PM UNEXPECTED_KERNEL_MODE_TRAP 0x0000007f 00000000`00000008 00000000`8005f031 00000000`000006f8 fffff800`034e0609 ntoskrnl.exe ntoskrnl.exe+71f00
123109-16052-01.dmp 12/31/2009 7:37:30 PM UNEXPECTED_KERNEL_MODE_TRAP 0x0000007f 00000000`00000008 00000000`8005f031 00000000`000006f8 fffff800`0348a89b ntoskrnl.exe ntoskrnl.exe+71f00
123109-16988-01.dmp 12/31/2009 7:57:20 PM UNEXPECTED_KERNEL_MODE_TRAP 0x0000007f 00000000`00000008 00000000`8005f031 00000000`000006f8 fffff800`0349589b ntoskrnl.exe ntoskrnl.exe+71f00
123109-16598-01.dmp 12/31/2009 8:00:04 PM UNEXPECTED_KERNEL_MODE_TRAP 0x0000007f 00000000`00000008 00000000`8005f031 00000000`000006f8 fffff800`034813f0 ntoskrnl.exe ntoskrnl.exe+71f00
123109-15787-01.dmp 12/31/2009 8:07:40 PM UNEXPECTED_KERNEL_MODE_TRAP 0x0000007f 00000000`00000008 00000000`8005f031 00000000`000006f8 fffff800`02885609 ntoskrnl.exe ntoskrnl.exe+71f00
010210-17784-01.dmp 1/2/2010 3:16:42 PM UNEXPECTED_KERNEL_MODE_TRAP 0x0000007f 00000000`00000008 00000000`8005f031 00000000`000006f8 fffff800`03487609 ntoskrnl.exe ntoskrnl.exe+71f00
010510-15288-01.dmp 1/5/2010 7:32:08 PM UNEXPECTED_KERNEL_MODE_TRAP 0x0000007f 00000000`00000008 00000000`8005f031 00000000`000006f8 fffff800`03488609 ntoskrnl.exe ntoskrnl.exe+71f00
011010-17019-01.dmp 1/10/2010 7:04:02 PM UNEXPECTED_KERNEL_MODE_TRAP 0x0000007f 00000000`00000008 00000000`8005f031 00000000`000006f8 fffff800`03494609 ntoskrnl.exe ntoskrnl.exe+71f00
011010-15584-01.dmp 1/10/2010 7:47:18 PM UNEXPECTED_KERNEL_MODE_TRAP 0x0000007f 000000... Read more

http://www.sevenforums.com/bsod-help-support/54642-random-bsods-seeming-point-netio-sys.html
Relevancy 55.9%

I'm sorry if such thread already existed, it's just I couldnt find anything to fix this annoying BSOD

It started a week ago when I installed Pc Tools antivirus with its spyware doctor. Naturally, I uninstalled it after Blue screen started popping out but nothing changed. Then I started looking for it's reason and I found out that it had to do with "Netio.sys". I looked on the forums for solution but nothing worked so far. I attached my last 2 dump files and I hope somebody will be able to help me . Thank you in advance

A:[SOLVED] Netio.sys Random BSOD

Hello,

Please take a look at the following thread and attach the requested logs.

This will provide valuable info to help diagnose your problem.

http://www.techsupportforum.com/foru...ta-452654.html

http://www.techsupportforum.com/forums/f299/solved-netio-sys-random-bsod-678261.html
Relevancy 55.9%

I'm getting BSOD randomly - sometimes several times a day, sometimes not for a week.
It happens in any program and is unpredictable. The blue message contains a problem with netio.sys.
Despite trying system restore, I can't stop it and don't know what is causing the conflict.
Would be very grateful if anyone could help. Have found .dmp files but don't know what to do with them!

Have used DM log collector to attach relevant files

thanks

http://www.sevenforums.com/bsod-help-support/385767-random-bsod-involving-netio-sys.html
Relevancy 55.9%

Hi

I have a fairly recent computer that seems to crash at random times, does not matter if it is under load or not.

The driver causing this seems to be NETIO.SYS , which according to google has to to with network communication , i have updated all network drivers and the error still occurs
i was wondering if anyone else could read something more out of these minidumps i have attatched.

A:Random BSOD NETIO.sys DRIVER_IRQL_NOT_LESS_OR_EQUAL

Welcome
Your files show that your BSOD problem is with a driver netio.sys
If you have zone alarm, uninstall and use the Windows Firewall
if you do not use Zone Alarm
Update your network drivers.
I have not seen any evidence of your using Zone Alarm, however.

http://www.sevenforums.com/bsod-help-support/242875-random-bsod-netio-sys-driver_irql_not_less_or_equal.html
Relevancy 55.47%

Hello everyone,

I have had several BSOD during last 3-4 weeks. They are seemengly random . Sometimes I have 3 BOSD a day, sometimes I have no BSOD in several days.

I have run windbg and it says "BugCheck D1, {50, 2, 0, fffff8800142a232}

Probably caused by : NETIO.SYS ( NETIO!StreamDataBlock+12 )"

I have no idea about the problem

I attach the SF Diagnostics logs. I don't know if I have to upload anything else.

Thank you in advance for your help.

Regards,
David

A:Random BSOD in Windows 7. Windbg: Probably cause NETIO.SYS

Hi digualada.

Daemon Tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known BSOD causer. Uninstall Daemon Tools at first. Then download SPTD standalone installer from Disk-Tools.com, and execute the downloaded file as guided below :
Double click to open it.
Click this button only:

If it is grayed out, as in the picture, there is no more SPTD in your system, and you just close the window.
Free up the startup. Windows does not need any other program to auto start with it, but the auto start programs often conflicts and causes various problems including BSODs.
Click on the Start button
Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the “Startup” tab.
Deselect all items other than the antivirus.
Apply > OK
Accept then restart.
Avast is failing here, contributing to your BSODs.

Code:
fffff880`090bc2d8 fffff880`0699b5ceUnable to load image \??\C:\Windows\system32\drivers\aswStm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for aswStm.sys
*** ERROR: Module load completed but symbols could not be loaded for aswStm.sys
aswStm+0x55ce
Uninstall Avast using Avast Uninstall Utility. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.

Download, install and update those, and then run full system scans with both of them, one by one; for a safety reason.

And Fortinet FortiCliant.

Code:
BugCheck D1, {8, 2, 0, fffff88001658a1d}

*** WARNING: Unable to verify timestamp for FortiWF2.sys
*** ERROR: Module load completed but symbols could not be loaded for FortiWF2.sys
Probably caused by : NETIO.SYS ( NETIO!CalloutStreamDataInit+1d )

Followup: MachineOwner
---------
I would suggest to uninstall it, at least as a test.

Let us know the results.

http://www.sevenforums.com/bsod-help-support/324972-random-bsod-windows-7-windbg-probably-cause-netio-sys.html
Relevancy 55.47%

Hello,

my PC (laptop, win10, about 3 years old) started to fall to BSOD quite often about month ago. It never did that before. The crashes happen mostly while doing some office work while having both Word and Excel 2016 open and also google chrome with multiple tabs. The program which causes the crashe is reported to be NETIO.sys and there is also the exception code, but I lost my note about what it is, sorry, hopefuly you can find it in the attached files. The only thing which I am aware of which changed at the time the crashes started is that my MS Office license ran out and some WIN10 updates were installed.

Hope I gave the basic description, were you interested in more info, I will try to help.

MB

http://www.tenforums.com/bsod-crashes-debugging/69817-netio-sys-error-bsod-rather-random-moments.html
Relevancy 55.47%

Good day Over the past few months my laptop has been randomly Crashing and freezing this is the rd attempt to write this post tonight It sometime happens whilst web browsing watching videos through to the tv via hdmi cable even whilst idoling [SOLVED] Freezes Random cause? - + BSOD NETIO.sys on the desktop It happens at random times but when [SOLVED] Random BSOD + Freezes - NETIO.sys cause? it happens it normally happens again relatively soon minutes to hours My Laptop - Asus N Jq WIN SP bit GB Ram Intel i CPU Q GHz months old Anti Virus - AVG Free Ed Graphics - Nvidia GeForce GT - GB I have three drivers left that can or still need to be updated which I will get onto over the next hours - Atheros AR Wireless Network Adapter - Realteck High Definition Audio - Bt- dont know what that driver is for I have ran Prime with no issues found The Hard disk had been scanned with Seagate Seatools previously Also had used the cmd prompt chkdsk I am yet to run memtest as I don't want to fiddle with things that I'm not confident in doing But I will get one of my mates to do it if I have to I also looked at the paging file it was set to 'automatically manage' but I had set it to and defragged then set it to x my Ram which is GB and the max to didnt know what to set the max to so i'll just double the initial page file size since space isn't an issue In the minidumps most of them point to the cause NETIO sys Though ntkrnlmp exe has popped up a couple of times I have attached x different mini dumps the one dated on the th show ntkrnlmp exe Any help or suggestions would be greatly appreciated Thank You In Advance Kris G

A:[SOLVED] Random BSOD + Freezes - NETIO.sys cause?

First of all, the 1.5 GB RAM size for paging file is a joke, and is an ancient algorithm for determining proper paging file size for back in the day when RAM was puny and needed a good paging file as a safety net in case things get ugly (which often did). Having it too low or nonexistent will also degrade performance. Set it to around 2GB.

It would be good to update those. You stated the crashdumps are relevant to network operations so the Atheros drivers would especially have something to do with it. The Bt-270 is the Asus bluetooth drivers.

Memtest is actually the least difficult utility to run. It is simply a "set and forget" utility and as soon as you boot up the PC with the Memtest USB stick or CD that you burned, it will get to work testing. Have it run at least 7 complete passes (usually takes an entire night).

Perusing the minidumps I noticed one of the minidumps reported corruption to the NETIO.sys image. Since it's off by a single bit, I have a feeling this may be overheating or voltage problems, or a CPU issue. Though you should still go for the memtest first. Also, when you did Prime95, how long did you run it? It should be around 9 hours, and run with Large FFTs or Blend.

You can check voltages and temps with HWInfo. Check "Sensors only" at startup.

http://www.techsupportforum.com/forums/f299/solved-random-bsod-freezes-netio-sys-cause-607207.html
Relevancy 55.47%

I am crazy for suffering the frequent BSOD.

2 weeks ago, the BSOD issue was like auto restart frequently without any notice. And it incurred in any situation, such as browsing any website from Chrome (v51), working by Word (it ruined my assignment), downloading big files over night (it restarted when I slept so that the download process stopped), etc. Actually it has influenced my normal use.

Recently, IDK what happens but the auto restart shows a blue screen with notice 'system_service_exception (netio.sys)'. Ok, it finally gives me a reminder of restart but the problem still is not solved.

I help many guys to install windows 10 enterprise 64bit but only my laptop suffers the auto restart.

I updated a vary of system information by log collector. Zip file containing minidumps and other files attached. Hope for any help.

http://www.tenforums.com/bsod-crashes-debugging/51887-bsod-random-interval-system_service_exception-netio-sys.html
Relevancy 55.47%
Relevancy 55.04%

Hello in random with processes Random random BSODs errors/bugchecks everyone I m stuck with a very frustrating BSOD problem and from the look of it it seems like some kind of harware failure Thing is I ve replaced almost everything but the BSODs refuse to go The BSODs are completely random but playing a current generation game Arkham Asylum GRID would guarantee a crash within an hour Mass Effect though runs for many hours at Random BSODs with random errors/bugchecks in random processes a stretch sometimes Analyzing my dumps told me that the crashes were totally random Page faults the irq not less than equal one the driver irq not less than equal one and the bugcheck codes were pretty random too Even the faulting processes were anything from ntoskrnl to npfs to my ati driver just about anything I like fixing my own problems plus I m impatient My temperatures were within limits so I assumed it was the RAM and got myself new corsair GB chips just to be sure Random BSODs with random errors/bugchecks in random processes But the BSODs continued So it s not the RAM the motherboard Graphic card and the PSU are brand new anyway The only thing left was the processor but they almost never go bad or so I thought The real clue was when one of the dumps was found to be corrupt by the debugger Reading up on that told me that it could be a processor issue So I borrowed a Xeon from a friend to test Well guess what The BSODs have almost gone At least I can work in peace now though the Xeon is painfully slow I say almost because I DID get one BSOD since I put the Xeon about a week back My friend tells me that I could have mismatched ram timings and that my old processor might not be at fault at all Route I need help I want to get rid of the Xeon and get something faster However how can I make sure that it was a processor issue in the first place Can you help me check my ram timings or whatever else it might be I still did get ONE BSOD even with the Xeon What if I get another processor but the BSODs continue I ve attached the last few minidumps The latest file is the one that happened with the Xeon I ll be so so grateful if someone can figure annything out from these dumps I have a feeling I ve spent a LOT of money on an otherwise easily fixable problem blackeye nbsp

A:Random BSODs with random errors/bugchecks in random processes

Your dumps came up with errors 0x8E / 0xD1 / 0xA etc. each dump citing different / random process being responsible for instance in question.

Such errors do and can occur due to mismatch RAM timings or incorrect voltage settings. I'll advise you to check specs of your (i.e. timings + voltage) and see whether settings in BIOS are correctly matching these.

Secondly, sometimes even the settings are matching you may still need to fiddle around with voltage settings (incrementally) and see whether that stabilize the system.

Lastly, do stress test your graphic card with OCCT, because one of the dumps came up with 0xc5 as 1st argument, which usually happen due to acceleration issues of graphics. Regards
 

http://www.techspot.com/community/topics/random-bsods-with-random-errors-bugchecks-in-random-processes.154392/
Relevancy 54.61%

I don't think I'm doing anything different than usual.

A:BSOD random, Netio.sys error. Has happened 3x in a week.

Avast contributes to BSOD's. Please remove it for testing purpose. Use Microsoft Security Essentials.

Recommended from a strict BSOD perspective, compatibility & stability compared to other security software:

Microsoft Security Essentials - Free Antivirus for Windows

Malwarebytes - Free

Good and Free system security combination.

Reduce items at start-up: Startup Programs - Change

Perform a clean boot: Troubleshoot Application Conflicts by Performing a Clean Startup

Scan with Kaspersky TDSSKiller:Anti-rootkit utility TDSSKiller

ESET online scanner: Free Online Virus Scanner | ESET

Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable!:-

TVALZ_O.SYS Fri Nov 9 09:08:41 2007 (4733CF39)
TOSHIBA ACPI-Based Value Added Logical and General Purpose Device Driver
Driver Reference Table - TVALZ_O.SYS

RimSerial_AMD64.sys Mon Nov 24 23:01:01 2008 (492ADDCD)
Virtual Serial Port driver for Blackberry
Driver Reference Table - RimSerial_AMD64.sys

mcdbus.sys Tue Feb 24 16:34:07 2009 (49A3CD1F)
MagicISO SCSI Host Controller driver
Driver Reference Table - mcdbus.sys

Rt64win7.sys Fri Jun 10 12:33:15 2011 (4DF1BAAB)
Realtek RTL8168D/8111D Family PCI-E Gigabit Ethernet NIC
Driver Reference Table - Rt64win7.sys

RTKVHD64.sys Thu Jul 7 15:34:50 2011 (4E157DBA)
Realtek High Definition Audio Function Driver
Driver Reference Table - RTKVHD64.sys

dnelwf64.sys Thu Jul 28 12:36:44 2011 (4E31037C)
Citrix Deterministic Networks DNE Driver (Cisco VPM Client)
Driver Reference Table - dnelwf64.sys

Also remove VMware software for the time being.

Use Revo Uninstaller to uninstall stubborn software. Opt for Advance Mode while uninstalling which allows leftover registry removal:Download Revo Uninstaller Freeware - Free and Full Download - Uninstall software, remove programs, solve uninstall problems

Perform a clean install of a driver following: How to Clean Left Over Driver Files with Driver Sweeper

Post screenshot(s) of your Hard Drive(s) using Crystal Disk Info Software: CrystalDiskInfo - Software - Crystal Dew World

Run a Hard Drive test: http://www.sevenforums.com/tutorials/313457-seatools-dos-windows-how-use.html


Check for heating issues using Speccy or HWmonitor

Upload a screen shot: Screenshots and Files - Upload and Post in Seven Forums

Keep us posted.

BSOD BUGCHECK SUMMARY


Code:
Debug session time: Mon Apr 14 19:21:44.423 2014 (UTC + 6:00)
Built by: 7601.18247.amd64fre.win7sp1_gdr.130828-1532
System Uptime: 0 days 19:03:49.345
Probably caused by : NETIO.SYS ( NETIO!StreamInvokeCalloutAndNormalizeAction+1d0 )
BugCheck D1, {50, 2, 0, fffff88001725250}
BugCheck Info: DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
Bugcheck code 000000d1
Arguments:
Arg1: 0000000000000050, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff88001725250, address which referenced memory
BUGCHECK_STR: 0xD1
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
PROCESS_NAME: firefox.exe
FAILURE_BUCKET_ID: X64_0xD1_NETIO!StreamInvokeCalloutAndNormalizeAction+1d0
??????????????????????????????????????????????????????????????????????????????????????``
Debug session time: Mon Apr 14 00:17:24.073 2014 (UTC + 6:00)
Built by: 7601.18247.amd64fre.win7sp1_gdr.130828-1532
System Uptime: 0 days 0:20:44.119
Probably caused by : NETIO.SYS ( NETIO!CalloutStreamDataInit+1d )
BugCheck D1, {8, 2, 0, fffff88001547a1d}
BugCheck Info: DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
Bugcheck code 000000d1
Arguments:
Arg1: 0000000000000008, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff88001547a1d, address which referen... Read more

http://www.sevenforums.com/bsod-help-support/328490-bsod-random-netio-sys-error-has-happened-3x-week.html