Windows Support Forum

Random "Special Pool" BSOD's During General Use

Q: Random "Special Pool" BSOD's During General Use

Hi all,

I have a long history of BSOD's with this computer during startup but I eventually discovered (also with the help of this forum) that they were caused by my DeathAdder mouse. BSOD's during startup have vanished.

Instead, they have been replaced with BSOD's during the use of Skype, Microsoft Word, LOTRO or anything else I might have running. There's no pattern that I can discern except the BSOD's originate under the Special Pool flag. I have previously turned on Driver Verifier to help get some additional detail in my dump files.

At this point, the best I can tell the BSODs point to my Webcam and NVIDIA drivers both of which are absolutely current and have been so for some time. I've reached the point where I need some assistance from someone with a lot more expertise in parsing out system info.

Thanks in advance for the help!

Relevancy 100%
Preferred Solution: Random "Special Pool" BSOD's During General Use

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Random "Special Pool" BSOD's During General Use

Welcome
Your reports seem to point to your webcam. Go to the corporate website and update the driver
Lvrs64.sys file descriptionProductname:Logitech Webcam Software Description:Logitech Kernel Audio Improvement Filter Driver Company:Logitech Inc.
If the drivers are current as you say, try to roll them back.

http://www.sevenforums.com/bsod-help-support/246156-random-special-pool-bsods-during-general-use.html
Relevancy 110.51%

Hello guys the last week I ve been strugling with these nasty BSODs At first I thought it was my HDDs as ntoskrn exe somewhat hinted towards that from googling it My HDDs have been causing a lot of trouble earlier as well due "ntoskrnl.exe" header", BSOD management", pool "Bad "Memory - to their somewhat long years of service However I ve recently reformated my computer and installed W on a brand new Corsair Force GT GB SSD hoping the BSODs would go away they didn t I googled BSOD - "Memory management", "Bad pool header", "ntoskrnl.exe" BSOD and I stumbled upon this forum and I thought I d give it a try I m somewhat desperate as I need my computer working for both work school and amusement I ve been trying to run Memtest in order to test my memory BSOD - "Memory management", "Bad pool header", "ntoskrnl.exe" but without any results I m also currently running on only on GB chip instead BSOD - "Memory management", "Bad pool header", "ntoskrnl.exe" of two to see if the problem still exists Also without any results This is the second time I m writing this thread btw I was just about to post it and my PC crashed Here is my two logs dxdiag last crash didn t generate a log oddly enough Here is additional hardware gear that I use Razer Megalodon Headset Razer Naga Logitech G Logitech C Webcam Corsair W PSU My temperatures are also good Both CPU and MB idles at around GPU s all good too I m also using a Corsair D chassi with dustfilters at both air-income so dust is minimal On top off this I use airpressure to clean away dust somewhat regularly and I also did exactly this days ago when I reinstalled the pc Thanks in advance nbsp

A:BSOD - "Memory management", "Bad pool header", "ntoskrnl.exe"

Are you over-clocking? Is the bios set to its defaults? Is the SSD set on a SATA 3 port in AHCI mode?
 

http://www.techspot.com/community/topics/bsod-memory-management-bad-pool-header-ntoskrnl-exe.182278/
Relevancy 110.08%

I've been receiving a blue screen of death every once in a while, and on the blue screen it states "Special Pool Detected Memory Corruption", among other things. Any ideas on how to get rid of this? I have Windows XP. Let me know if I need to post more info.

Thanks
 

https://forums.techguy.org/threads/special-pool-detected-memory-corruption.838548/
Relevancy 110.08%

Hello, so I've been experiencing a large amount of BSOD's when I game but I've recently upgraded to windows 10 in hopes of the issue possibly being fixed so the old crash dump files are gone. One bsod occured today, so I'll leave a download for it below, thanks for any help

Specs: Processor
AMD FX(tm)-6300 Six-Core Processor
Video Card
AMD Radeon R9 200 Series
Memory
8.1 GB
Operating System
Microsoft Windows 10 (build 10240), 64-bit

A:Random BSOD when gaming "BAD POOL HEADER"

Hello Ghost Prodegy, Please upload the BSOD Posting instructions, BSOD - Posting Instructions - Windows 10 Forums. Also,

Please fill out your System Specs
   Information
Your System Specs will help us to help you, and doing it in this manner will make them available to all helpers in every post and keep us from hunting for them. We ask that you fill them out in as much detail as possible including Desktop or Laptop, Model number if it is an OEM computer and all components with the Manufacturer and Model number if possible.
[LEFT]If you will go to your last post and click the 'System Specs' in the bottom left of the post, you will find a link to update your system specs. Please fill those out in as much detail as possible, making sure to click save at the bottom of the page. If you would like to know what we would like, you can click 'My System Specs' at the bottom left of this post to see mine. If you are unsure how to do it, maybe this will help System Specs - Fill in at Ten Forums - Windows 10 Forums



The dump file you uploaded sys this


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 19, {20, ffffc000c6324be0, ffffc000c6324d50, 5170251}

fffff80294e3b500: Unable to get MiVisibleState
Probably caused by : memory_corruption ( nt!MiParseImageCfgBits+3f8 )

Followup: MachineOwner
Please Run Memtest86+

   Information
Please download from this site only http://www.memtest.org/ in the middle of the page are the Download links, you can download the ISO.zip or the Auto USB Flash Drive installer.zip
Extract the Zip file. If you chose the ISO image, burn it to a CD using Windows Disk Image Burner or any Image burner you may have. If you downloaded the Auto USB installer, extract it, insert your USB 2.0 Flash Drive and take note of the drive letter. Run the installer, select the Flash Drive Letter, check the format box and press next. It will install memtest86+ to a flash drive. You can use either V4.20 or V5.01. Boot from your selected media. If you use V5.01 it will tell you to press certain buttons at the start, please press no buttons. The test will begin on it's own and continue to run until you stop it. It needs to run for 8 complete passes or until you receive an error. If you receive an error, stop the test. Even 1 error is a fail. Each pass tests a different part of the ram and each of the 10 tests in each pass tests something different. It takes a minimum of 8 passes to completely test the ram, more passes are better. It is quite a long test and will take several hours depending on how much ram you have. Due to the time length it is best to run overnight. If you have any questions, please do not hesitate to ask

http://www.tenforums.com/bsod-crashes-debugging/10429-random-bsod-when-gaming-bad-pool-header.html
Relevancy 110.08%

I have been getting these quot Bad Pool Header quot and quot System Service Exception quot BSODs for about a day now the quot Bad Pool Header quot one tends to pop up more often then the other btw I ran a registry cleaner which didn't work and ran memtest this morning and it showed that my memory was fine The BSODs tend to occur more often when I am playing a game or running some program that uses a bit more memory but it also happens when I am just on the internet On the other hand last night I did nothing but surf YouTube for hours and didn't get a BSOD at all However since then I haven't been able to do anything for more than minutes without being in safe mode without it crashing and this morning it completely froze until I turned it off My OS is Windows Random Service Exception" "Bad Pool BSODs "System and Header" Home Premium bit It came preinstalled from the manufacturer and unfortunately I do not have the install disc The entire laptop is less than years old and there have been no major hardware changes and I have never reinstalled the OS

A:Random "Bad Pool Header" and "System Service Exception" BSODs

UPDATE: Another BSOD just happened after I left the computer idle for a couple of hours except this one said something about Asdsm.sys.

http://www.techsupportforum.com/forums/f299/random-bad-pool-header-and-system-service-exception-bsods-640978.html
Relevancy 110.08%

I have been getting these quot Bad Pool Header quot and quot System Service Exception quot BSODs for about a day now the quot Bad Pool BSODs Service Pool Random "System and Exception" Header" "Bad Header quot one tends to pop up more often then the other btw I ran a registry cleaner which didn't work and ran memtest this morning and it showed that my memory was fine The BSODs tend to occur more often when I am Random "Bad Pool Header" and "System Service Exception" BSODs playing a game or running some program that uses a bit more memory but it also happens when I am just on the internet On the other hand last night I did nothing but surf YouTube for hours and didn't get a BSOD at all However since then I haven't been able to do anything for more than minutes without being Random "Bad Pool Header" and "System Service Exception" BSODs in safe mode without it crashing and this morning it completely froze until I turned it off My OS is Windows Home Premium bit It came preinstalled from the manufacturer and unfortunately I do not have the install disc The entire laptop is less than years old and there have been no major hardware changes and I have never reinstalled the OS

A:Random "Bad Pool Header" and "System Service Exception" BSODs

UPDATE: Another BSOD just happened after I left the computer idle for a couple of hours except this one said something about Asdsm.sys.

http://www.sevenforums.com/bsod-help-support/224813-random-bad-pool-header-system-service-exception-bsods.html
Relevancy 106.64%

Hi I am having a problem BSOD "Bad Mode Nonpage Area" and Header" In Runs Safe "Page Pool in with my newer computer I just got this rig a few months ago and never had a problem until last Thursday It Blue Screened on me while I was installing ARC GIS From then on it randomly crashes I have previously installed ARC GIS and never had a problem I keep things updated windows and BSOD "Bad Pool Header" and "Page In Nonpage Area" Runs in Safe Mode drivers and I do think windows forced through an BSOD "Bad Pool Header" and "Page In Nonpage Area" Runs in Safe Mode update earlier that day I un installed ARC GIS and the windows update didn't make any difference I have also ran the Windows Mem test and Auslogic BoostSpeed Registry repair I keep getting quot Bad Pool Header quot and quot Page In Nonpage Area quot and I can't seem to find something that triggers it So far it hasn't crashed in Safe Mode without network access I tried it once with access and it crashed Currently have windows checking the drives for errors I have I think I attached the proper dump files This is my work computer so this is kind of causing a big problem Thanks in advanced for the help

A:BSOD "Bad Pool Header" and "Page In Nonpage Area" Runs in Safe Mode

Welcome aboard.

The crash dump you supplied, suggests the display driver failed there.

Code:
fffff880`0c995858 fffff880`10018000Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
nvlddmkm+0x980000
Go to Drivers - Download NVIDIA Drivers, follow option two to search for the appropriate driver for your system automatically, and install it.
Let us know how it worked.

http://www.sevenforums.com/bsod-help-support/264019-bsod-bad-pool-header-page-nonpage-area-runs-safe-mode.html
Relevancy 102.77%

Hey all, I've gotten a couple blue screens over the past couple of days. I just replaced my GTX 660 with a 960 over the past weekend and received a Bad pool header BSOD on the 9th, then today (the 11th) 2 Reference by pointer BSOD's. I've done some research and it seems to all point to driver errors. My brother just got the same GPU and is having a massive amount of blue screens with slightly different errors. Is this an issue with Nvidia?

Thanks for your help! All req'd info should be attached below

A:3 BSOD's after new GPU, "Reference by Pointer" and "BAD POOL HEADER"

Hello, papasmerf767. I will try to help you, but I need you to do something for me.

Please fill out your System Specs




   Information
Your System Specs will help us to help you, and doing it in this manner will make them available to all helpers in every post and keep us from hunting for them. We ask that you fill them out in as much detail as possible including Desktop or Laptop, Model number if it is an OEM computer and all components with the Manufacturer and Model number if possible.



If you will go to your last post and click the 'System Specs' in the bottom left of the post, you will find a link to update your system specs. Please fill those out in as much detail as possible, making sure to click save at the bottom of the page. If you would like to know what we would like, you can click 'My System Specs' at the bottom left of this post to see mine. If you do not know what your components are, this will help you accomplish this task. System Info - See Your System Specs. Please list the as detailed as possible with Manufacturer and Model number. Also, please include your PSU and CPU Cooler.

You had 2 dump files


Code:
REFERENCE_BY_POINTER (18)
Arguments:
Arg1: fffffa800c7da570, Object type of the object whose reference count is being lowered
Arg2: fffffa8013ccf3a0, Object whose reference count is being lowered
Arg3: 0000000000000001, Reserved
Arg4: 0000001000000000, Reserved
The reference count of an object is illegal for the current state of the object.
Each time a driver uses a pointer to an object the driver calls a kernel routine
to increment the reference count of the object. When the driver is done with the
pointer the driver calls another kernel routine to decrement the reference count.
Drivers must match calls to the increment and decrement routines. This bugcheck
can occur because an object's reference count goes to zero while there are still
open handles to the object, in which case the fourth parameter indicates the number
of opened handles. It may also occur when the object?s reference count drops below zero
whether or not there are open handles to the object, and in that case the fourth parameter
contains the actual value of the pointer references count.
And


Code:
BAD_POOL_HEADER (19)
The pool is already corrupt at the time of the current request.
This may or may not be due to the caller.
The internal pool links must be walked to figure out a possible cause of
the problem, and then special pool applied to the suspect tags or the driver
verifier to a suspect driver.
Arguments:
Arg1: 0000000000000020, a pool block header size is corrupt.
Arg2: fffffa8015627100, The pool entry we were looking for within the page.
Arg3: fffffa80156276d0, The next pool entry.
Arg4: 000000000c5d0010, (reserved)

BUGCHECK_STR: 0x19_20
POOL_ADDRESS: GetPointerFromAddress: unable to read from fffff800032c1100
GetUlongFromAddress: unable to read from fffff800032c11c0
fffffa8015627100 Nonpaged pool
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
PROCESS_NAME: WiFi GO! Serve

Use !analyze -v to get detailed debugging information.
BugCheck 19, {20, fffffa8015627100, fffffa80156276d0, c5d0010}
Probably caused by : afd.sys ( afd!AfdPoll32+864 )
Followup: MachineOwner
afd.sys is the Ancillary Function Driver for WinSock supplied by Windows Update. It has to do with network connectivity.

Please reinstall your Graphics driver following this tutorial, install only the Graphics Driver and the PhysX driver. NVIDIA Drivers - Avoid Problems

Also, please open an elevated command prompt ( click start, type cmd in the search box, right click on the cmd entry and select run as administrator) in the black box that opens, copy/paste sfc /scannow. If you decide to type it, notice the space between the sfc and the /. It is a system file checker which will scan your system files and attempt to correct any missing or corrupt files. What we want are the results to say windo... Read more

http://www.sevenforums.com/bsod-help-support/372562-3-bsods-after-new-gpu-reference-pointer-bad-pool-header.html
Relevancy 102.77%

Hi everyone,

I recently have noticed more and more BSODs. I had this problem about 6 months ago and was able to track it down to drivers that came from Daemon tools. I cleared all that out and it fixed the issue. I don't think these new BSODs are related but they might be.

This seems to be happening randomly. It happens roughly every 2 weeks and early in the morning (1am, 6am, 9am, etc.) but not at a consistent time. As far as I can tell, I am not doing anything or leaving open any specific program that triggers this. There doesn't seem to be a consistent pattern.

I ran the DM Log Collector and uploaded the zip file here. Any help would be appreciated. Thanks!

A:BSOD - Happens randomly. "Bad Pool Header", "DRIVER_VERIFIER"

Code:

Microsoft (R) Windows Debugger Version 6.2.9200.20512 X86
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Downloads\MUSICMACHINE-Wed_10_22_2014_142816_61\102214-20108-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
Machine Name:
Kernel base = 0xfffff800`03013000 PsLoadedModuleList = 0xfffff800`03256670
Debug session time: Wed Oct 22 00:31:30.751 2014 (UTC + 6:00)
System Uptime: 6 days 13:12:26.826
Loading Kernel Symbols
...............................................................
................................................................
.....................................
Loading User Symbols
Loading unloaded module list
......
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck C4, {91, 2, fffffa80085ecb50, 0}

Probably caused by : hardware ( nt! ?? ::FNODOBFM::`string'+4884 )

Followup: MachineOwner
---------

1: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

DRIVER_VERIFIER_DETECTED_VIOLATION (c4)
A device driver attempting to corrupt the system has been caught. This is
because the driver was specified in the registry as being suspect (by the
administrator) and the kernel has enabled substantial checking of this driver.
If the driver attempts to corrupt the system, bugchecks 0xC4, 0xC1 and 0xA will
be among the most commonly seen crashes.
Arguments:
Arg1: 0000000000000091, A driver switched stacks using a method that is not supported by
the operating system. The only supported way to extend a kernel
mode stack is by using KeExpandKernelStackAndCallout.
Arg2: 0000000000000002
Arg3: fffffa80085ecb50
Arg4: 0000000000000000

Debugging Details:
------------------


BUGCHECK_STR: 0xc4_91

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

PROCESS_NAME: WDDriveService

CURRENT_IRQL: 2

EXCEPTION_RECORD: fffff8800b9aa708 -- (.exr 0xfffff8800b9aa708)
ExceptionAddress: fffff8000335e612 (nt!PspThreadDelete+0x0000000000000002)
ExceptionCode: c000001d (Illegal instruction)
ExceptionFlags: 00000000
NumberParameters: 0

TRAP_FRAME: fffff8800b9aa7b0 -- (.trap 0xfffff8800b9aa7b0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=000000007ef8f000 rbx=0000000000000000 rcx=fffff8800b9aa900
rdx=0000000000000000 rsi=0000000000000000 rdi=0000000000000000
rip=fffff8000335e612 rsp=fffff8800b9aa940 rbp=fffffa80085ecb50
r8=fffffa800bc940e8 r9=0000000000000000 r10=fffffffffffffffd
r11=fffff880009e7100 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei ng nz na pe nc
nt!PspThreadDelete+0x2:
fffff800`0335e612 c4 ???
Resetting default scope

MISALIGNED_IP:
nt!PspThreadDelete+2
fffff800`0335e612 c4 ???

LAST_CONTROL_TRANSFER: from fffff800030df4ea to fffff80003... Read more

http://www.sevenforums.com/bsod-help-support/349762-bsod-happens-randomly-bad-pool-header-driver_verifier.html
Relevancy 92.88%

Playing world of tanks I had a BSOD that said "Bad Pool Header" then of course a bunch of stuff that means nothing to me... I have downloaded the SF Diag tool and will attack the zip with my dumps/diag info here...

As a Side note... the BSOD does the memory dump then supposedly "restarts" the computer but mine just sits there on a black screen until I manually hold the power button down to turn it off then turn it back on....

A:BSOD Playing World of Tanks "Bad Pool Header"

Code:
BugCheck 19, {3, d2eaf600, ac212f78, d2eaf600}

*** WARNING: Unable to verify timestamp for avgidsshimx.sys
*** ERROR: Module load completed but symbols could not be loaded for avgidsshimx.sys
Probably caused by : Pool_Corruption ( nt!ExDeferredFreePool+312 )

Code:
Usual causes: Device driver
avgidsshimx.sys seems to be a driver which is causing the crash, and linked to AVG, therefore I suggest uninstalling AVG with the offical installer (see link below)

Uninstall AVG:


Code:
Start Menu\Programs\AVG
Download tools and utilities | AVG UK
Uninstall Spybot - Search & Destroy:


Code:
Start Menu\Programs\Spybot - Search & Destroy
The later editions of AVG have been known to cause some stability issues with Windows 7, furthermore I would suggest uninstalling Spybot, as AVG and Spybot are both real-time protection programs and therefore are clashing with each other and producing crashes.

You can run full scans with MSE and Malwarebytes:Microsoft Security Essentials - Microsoft Windows
Malwarebytes : Free anti-malware download
Remember to install the free version of Malwarebytes not the free trail; untick the free trail box during installation. Microsoft Security Essentails has proven to much more stable and less problematic within Windows 7, than other AV suites available to use. Remember to update the security definitions for both MSE and Malwarebytes before scanning your system.

Uninstall Free Window Registry Repair:


Code:
Start Menu\Programs\Free Window Registry Repair
Registry cleaners tend to always cause more damage to the system, and can lead to a unbootable operating system.

Update BIOS (if possible):


Code:
BIOS Version/Date American Megatrends Inc. V2.1B1, 6/6/2008
Your BIOS is very old, check for any possible BIOS updates, and check for any compatibility issues with:Windows 7 Upgrade Advisor - Download - Microsoft Windows

http://www.sevenforums.com/bsod-help-support/266936-bsod-playing-world-tanks-bad-pool-header.html
Relevancy 92.88%

So I'm not very experienced with computers, so my friend told me to post to this forum for help. I get consistent BSOD's when using the internet. I notice it more when I'm on youtube, but it's not limited to that. I've googled "Bad Pool Caller" like the error told me to but found no solutions.

A:BSOD when using google chrome/internet, "Bad Pool Caller"

Please look for updates for drivers highlighted in red and remove Avast as it's one of the causes of your BSOD.
Use this tool: Avast Uninstall Utility | Download aswClear for Avast Removal

Code:
PxHlpa64.sys Tue Oct 20 20:08:42 2009 (4ADDFCAA)
Sonic CD/DVD driver (used by many different CD/DVD programs)
http://www.carrona.org/drivers/driver.php?id=PxHlpa64.sys

CLVirtualDrive.sys Mon Dec 26 14:26:47 2011 (4EF87617)
CyberLink Virtual Device Driver
http://www.carrona.org/drivers/driver.php?id=CLVirtualDrive.sys

RTKVHD64.sys Tue Jun 19 10:50:56 2012 (4FE03D70)
Realtek High Definition Audio Function Driver
http://www.carrona.org/drivers/driver.php?id=RTKVHD64.sys

IntcDAud.sys Tue Jun 19 16:40:51 2012 (4FE08F73)
Intel Graphics Media Accelerator HD Driver
http://www.carrona.org/drivers/driver.php?id=IntcDAud.sys

HECIx64.sys Tue Jul 3 00:14:58 2012 (4FF21D62)
Intel Management Engine Interface
http://www.carrona.org/drivers/driver.php?id=HECIx64.sys

WirelessButtonDriver64.sys Fri Jul 27 22:22:12 2012 (5012F874)
HP wireless driver - 1st seen in Windows 8[br]Apparently related to various keyboard functions and FN key
http://www.carrona.org/drivers/driver.php?id=WirelessButtonDriver64.sys

iaStorA.sys Tue Jul 31 20:21:21 2012 (50182221)
Intel RST (Rapid Storage Technology) driver
http://www.carrona.org/drivers/driver.php?id=iaStorA.sys

dump_iaStorA.sys Tue Jul 31 20:21:21 2012 (50182221)
driver created to provide disk access during crash dump file generation
http://www.carrona.org/drivers/driver.php?id=dump_iaStorA.sys

Smb_driver_Intel.sys Sat Aug 25 01:22:13 2012 (50380CA5)

Smb_driver_Intel.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

SynTP.sys Wed May 8 00:18:34 2013 (51897DBA)
Synaptic Touch Pad Driver
http://www.carrona.org/drivers/driver.php?id=SynTP.sys

Rt630x64.sys Fri May 10 11:59:08 2013 (518CC4EC)
Realtek PCI/PCIe Adapters
http://www.carrona.org/drivers/driver.php?id=Rt630x64.sys

intelppm.sys Thu Aug 22 10:46:35 2013 (5215CFEB)
Intel Processor driver
http://www.carrona.org/drivers/driver.php?id=intelppm.sys

igdkmd64.sys Thu Oct 31 19:28:01 2013 (5272A131)
Intel Graphics driver
http://www.carrona.org/drivers/driver.php?id=igdkmd64.sys

netr28x.sys Tue Nov 26 09:32:08 2013 (52945C88)
Ralink RT2860 series Wireless LAN Card (you may have a different manufacturer)
http://www.carrona.org/drivers/driver.php?id=netr28x.sys

Hamdrv.sys Thu Sep 4 11:44:21 2014 (54083475)
LogMeIn Hamachi Virtual Miniport Driver
http://www.carrona.org/drivers/driver.php?id=Hamdrv.sys

aswMonFlt.sys Thu Nov 6 13:53:07 2014 (545B6F33)
avast! File System Minifilter Driver
http://www.carrona.org/drivers/driver.php?id=aswMonFlt.sys

aswKbd.sys Thu Nov 6 13:53:07 2014 (545B6F33)
avast! Keyboard Filter Driver
http://www.carrona.org/drivers/driver.php?id=aswKbd.sys

aswRvrt.sys Thu Nov 6 13:53:22 2014 (545B6F42)
Avast! Revert driver[br](Likely a boot driver)
http://www.carrona.org/drivers/driver.php?id=aswRvrt.sys

aswVmm.sys Thu Nov 6 13:53:31 2014 (545B6F4B)
avast! VM Monitor driver
http://www.carrona.org/drivers/driver.php?id=aswVmm.sys

aswSnx.sys Thu Nov 6 13:53:55 2014 (545B6F63)
avast! Virtualization Driver
http://www.carrona.org/drivers/driver.php?id=aswSnx.sys

aswRdr2.sys Thu Nov 6 13:54:02 2014 (545B6F6A)
avast! TDI Redirect Driver
http://www.carrona.org/drivers/driver.php?id=aswRdr2.sys

aswHwid.sys Thu Nov 6 13:55:01 2014 (545B6FA5)
avast! HWID driver
http://www.carrona.org/drivers/driver.php?id=aswHwid.sys

aswNdisFlt.sys Thu Nov 6 13:55:50 2014 (545B6FD6)
Avast! Firewall Driver
http://www.carrona.org/drivers/driver.php?id=aswNdisFlt.sys

aswSP.sys Thu Nov 6 14:09:55 2014 (545B7323)
avast! Self Protection Driver
http://www.carrona.org/drivers/driver.php?id=aswSP.sys

aswStm.sys Thu Nov 6 14:11:00 2014 (545B7364)
avast! Antivirus Stream F... Read more

http://www.eightforums.com/bsod-crashes-debugging/57341-bsod-when-using-google-chrome-internet-bad-pool-caller.html
Relevancy 92.88%

Recently had my work laptop upgraded to Windows 7 from XP. Everything worked fine for one week. Then I started getting the BSOD error " Bad pool header". My computer will repeatedly shut down to protect windows. I notified my IT department and they believe that I corrupted the hard drive, as I have local admin rights. they provided me with a loaner computer and loaded my backup system on to this laptop. Worked great for a week and then again started getting " bad pool header and new error "page fault in non paged area. They believe I again corrupted the hard drive. The only software I installed is a program I use for work "Form Max" which other users have been using successfully in Windows 7. I used the DM log and have attached the dump files. Any assistance would be appreciated.

A:BSOD error " Bad pool header and page fault in non paged area"

Just discovered the original attachment was blank This one I checked and it does have files. Would appreciate any help that can be provided.
Thanks.

http://www.sevenforums.com/bsod-help-support/375574-bsod-error-bad-pool-header-page-fault-non-paged-area.html
Relevancy 92.45%

"bad pool header" blue screen crashed on me while playing Battlfield 3

? OS - Windows 7 x64 OEM
? What was original installed OS on system? - Windows 7 x86
? Age of system (hardware) - 5 years old
? Age of OS installation - have you re-installed the OS? - 5 years old, does update to 64 bit count?
? CPU - Intel Core 2 Duo E6750 2.66GHz
? Video Card - ATI HD 3870
? MotherBoard - Gigabyte GA-P35-DS3L
? Power Supply - brand & wattage - Antec 550W

Thanks in advance

A:BSOD: blue screen "Bad pool header"

NOTE: I have severe eye problems. If I do not respond to your postings, please PM another staff member for assistance.


Quote:




Daemon Tools (and Alcohol % software) are known to cause BSOD's on Win7 systems due to the sptd.sys driver.
Please uninstall the program, then use the following free tool to ensure that the troublesome sptd.sys driver is removed from your system (pick the 32 or 64 bit system depending on your system's configuration): DuplexSecure - FAQ




9 memory dumps from 01 Aug to 31 Oct 2011 (3 months)
5 different BSOD error codes
4 different causes are blamed.
This is usually a pattern for a hardware failure, but it can be cuased by incompatible software, faulty low-level drivers (such as the sptd.sys driver in Daemon Tools), or even by malware.

If the above procedure doesn't stop the BSOD's, please run Driver Verifier according to these instructions:

Quote:




Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

So, I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Special Pool" and "Low Resource Simulation" and click "Next"
NOTE: You can use Low Resource Simulation if you'd like. From my limited experimentation it makes the BSOD's come faster.
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

Reboot into Windows (after the crash) and turn off Driver Verifier by going back in and selecting "Delete existing settings" on the first page, then locate and zip up the memory dump file and upload it with your next post.

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.

If that doesn't work, post back and we'll have to see about fixing the registry entry off-line:

Code:
Delete these registry keys to stop Driver Verifier from loading (works in XP, Vista, Win7):
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\VerifyDrivers
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\VerifyDriverLevel
More info on this at this link: Using Driver Verifier to identify issues with Windows drivers for advanced users




Then, while waiting for a reply, please run these free diagnostics:

Quote:




H/W Diagnostics:
Please start by running these bootable hardware diagnostics:
Memory Diagnostics (read the details at the link)
HD Diagnostic (read the details at ... Read more

http://www.techsupportforum.com/forums/f299/bsod-blue-screen-bad-pool-header-609687.html
Relevancy 92.45%

Hi, my computer is an HP P7-1245 desktop
Specs : i5 - 2400
8 gb ram
1 tb hdd
randeon hd 7450 video card

So I first bought this computer during march 2012, but it broke down and went in for repairs in july. So I guess this computer is about 2 months old? The problem was today I encountered a BSOD and i saw "Bad pool headeR" as the error. Please help!

A:BSOD "Bad pool header" first encounter when on desktop

Welcome to Seven Forums Willy.

http://www.sevenforums.com/crashes-d...tructions.html

Run a RAM test.

RAM (memory):
This will require memtest on a bootable CD or USB stick.
RAM - Test with Memtest86+

http://www.sevenforums.com/bsod-help-support/257644-bsod-bad-pool-header-first-encounter-when-desktop.html
Relevancy 92.45%

Hello Since Few Days Im getting BSOD after changing settings of my ATI Mobility Readon HD graphic card settings to all Maxium Level using of graphic card After getting First BSOD indicating that bad video driver i uninstalled graphic card driver and again installed to default settings Again now it is showing BSOD this time error BSOD with Header msg "Bad pool Data" it BSOD with error msg "Bad pool Header Data" is displaying error message as quot Bad Pool Header Data quot details as follows Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode BCP BCP FFFFFA A D BCP FFFFFA A B BCP B E OS Version Service Pack Product Files that help describe the problem C Windows Minidump - - dmp C Users UDAY AppData Local Temp WER- - sysdata xml BSOD with error msg "Bad pool Header Data" Read our privacy statement online Windows Privacy Statement - Microsoft Windows If the online privacy statement is not available please read our privacy statement offline C Windows system en-US erofflps txt Iam also uploading the quot Windows NT BSOD jcgriff quot and quot Perfmon html quot files as rar please go through and solve my problem Thanking You

A:BSOD with error msg "Bad pool Header Data"

1. The single DMP blamed Avast.
Avast can be a contributing cause of BSOD'S .
Please remove and replace with Microsoft Security Essentials AT LEAST TO TEST.
http://files.avast.com/files/eng/aswclear5.exe

Microsoft Security Essentials - Free Antivirus for Windows
2. Please run the System Update Readiness Tool (SURT) and then update to SP-1

32 Bit

Download: System Update Readiness Tool for Windows 7 (KB947821) [February 2012] - Microsoft Download Center - Download Details

64 Bit

Download: System Update Readiness Tool for Windows 7 for x64-based Systems (KB947821) [February 2012] - Microsoft Download Center - Download Details
Now update to SP-1

Learn how to install Windows 7 Service Pack 1 (SP1)

http://www.sevenforums.com/bsod-help-support/219656-bsod-error-msg-bad-pool-header-data.html
Relevancy 92.45%

Good evening, after re-installing Win7 pro today I got a BSOD for the first time since I've had this machine.
Did Memtest86 (2 passes) and the memory seems ok. I really would like to know what's going on.
Maybe someone can tell me something from the .dmp file.
Thanks a lot

http://www.sevenforums.com/bsod-help-support/401466-bsod-bad-pool-header-after-windows-re-install.html
Relevancy 92.45%

I have been searching online for Pls BSOD "Bad Illiterate- with Caller" help Computer Pool a solution to this Bad Pool Caller quot messaged I get the BSOD on startup Computer Illiterate- Pls help with BSOD "Bad Pool Caller" and can t get to anything else except setup mode where everything looks OK and safe mode which goes back to BSOD before I can do anything UPDATE I tried to use registry repair thinking the CD might start by itself but all it did was change the blue screen message which now says page fault in non aged area It advises me to use safe mode which as I said doesn t work The technical info is STOP X OXDFFB X X CC OX Beginning dump of physical memory Physical memory dump complete Contact your system administrator or technical support group for further assistance It is very important that I save the docs and pics on the computer When I took a PC to a computer shop they wiped it clean and I want to be sure any instructions to fix the blue screen on this PC don t do the same thing Most recently I had several different techies from Make it Work try to install a wireless router with little success My yo eventually did it but he is stumped by this BSOD I would please very much appreciate suggestions that a computer idiot would understand-- can you help Please nbsp

Relevancy 92.45%

Firstly apologies if this is an issue that's been dealt with elsewhere if so I'd appreciate a pointer - I couldn't find anything dealing with this specific problem through a keyword search I'm running Windows XP Home with SP which I installed some time ago and didn't cause any problems that I noticed But recently my computer turned itself off - and every time I turn it Header" no - apparent reason BSOD "Bad Pool on straight after startup I get a BSOD with the following details BAD POOL HEADER STOP x x xFEC xFEC x A The system seems to run fine in safe mode but I haven't been able to use any debugging programs etc 'cause I didn't have them installed before the crash and I "Bad Pool Header" BSOD - no apparent reason can't figure out how I can do install them within safe mode which is the only way the system will run The only thing I've changed on the system recently is that I installed an update of MSN Live Messenger - but I've disabled automatic startup which hasn't made any difference and I haven't been able to reinstall it b c again I can't don't know how to install uninstall programs in safe mode Any help would be greatly appreciated

A:"Bad Pool Header" BSOD - no apparent reason

are you using a hp scanner or printer

http://www.techsupportforum.com/forums/f10/bad-pool-header-bsod-no-apparent-reason-147982.html
Relevancy 92.02%

I have some problem on my Toshiba M Laptop The blue screen came out when I try to log on BSOD quot Bad Pool Header quot appears in front of the log on screen already started-up before This is the first time of BSOD by newly OS all drivers installed and it happens one time Before this happens I turned on my external LCD monitor that included USB Hub connector USB Devices Keyboard Mouse DAC UPS Data Link turned on when switched on the monitor Previously I've seen BSOD quot Page Fault in Nonpaged Area quot when softwares devices are starting up appears one time then I formatted OS amp claimed a new mainboard already Can anyone tell me the system data written failed can caused this problem or the hardware BSOD Win7 BSOD: Header" log when Pool problem others "Bad on + issue Maybe it's caused by driver problem please check my dump files amp help Thanks in advance My Laptop Toshiba Satellite M - X OS Windows Ultimate x OEM Toshiba CPU Intel Core i M GHz RAM Samsung GB x Dual Channel HDD Hitachi GB VGA BSOD: "Bad Pool Header" when log on Win7 + others BSOD problem Intel HD Graphics NVIDIA Geforce GT M GB SOUND Realtek High Definition Audio

A:BSOD: "Bad Pool Header" when log on Win7 + others BSOD problem

May I bump once.
Hope someone can find out what caused my two blue screens, also the solutions.
Thanks a lot.

http://www.sevenforums.com/bsod-help-support/123821-bsod-bad-pool-header-when-log-win7-others-bsod-problem.html
Relevancy 91.59%

Hello

Recently I've been having a lot of problems with BSOD's. It started about a month ago, but stopped when I used the Windows Recovery Tool. Now I am getting BSOD's again and using recovery doesn't seem to work. I did a clean install of Windows 7 x64 about 2 months ago.

I used the SF diagnostic tool and uploaded the files as an attachment.

Any help would be greatly appreciated. Just tell me if you need to know more about my system.

A:Frequent BSOD's, "bad pool header"

Please post this before we continue: Windows Genuine and Activation Issue Posting Instructions

http://www.sevenforums.com/bsod-help-support/286007-frequent-bsods-bad-pool-header.html
Relevancy 91.59%

Hello all One day about a week ago my computer crashed when I was doing nothing abnormal I believe my room mate had just played WOW or something all of a sudden the computer shuts down and crashes every time it starts up again when programs are loading At first every time i would try to start up antivirus and other programs would be launching and then a BSOD complaining about quot bad pool header quot would come up and it would reset after a certain amount of time At this point my first course of action was to disable startup programs because i was able to boot into safe mode So i used MSCONFIG and edited the start up files down to pretty much nothing and it would still crash when i started into windows normally even though safe mode worked Then my room mate went into safemode a litte later when i was away and downloaded an anti virus that apparently found a single virus in the system even though i have been running nod for a very long time and also ran registry mechanic and repaired everything that it showed This did not help startup HEADER" "BAD on POOL BSOD the same thing happened upon start up even with everything disabled in the startup sequence After that i decided to do a repair installation of XP and that worked fine but after i started to start up normally from there the same BSOD came up but it occurred earlier in the start up process during the welcome screen loading Windows still loads but once the blue welcome screen comes up it goes BSOD on me However i no longer have access to safemode because of the repair installation makes it so you need to activate windows amp micro soft for that before you can use safe mode so when i goto safe mode it wont let me login until i activate but i BSOD "BAD POOL HEADER" on startup cannot activate without logging in normally right So currently now i have discovered something beautiful called linux and i was able to load a livecd of Ubuntu and everything started up fine and never crashed which tells me this is BSOD "BAD POOL HEADER" on startup probably not a hardware problem I have Linux installed now on a different hard drive than the windows XP installation and have been running it without any crashing However i did notice there were quite a few errors detected in memtest that is included on the ubuntu installation disk particularly during tests and of the test battery In addition in linux i can mount and copy files off of the NTFS partition on the hard drive containing my XP installation I have also run CHKDsk -r on all drives which supposedly corrected some problems Im stuck usually i can fix my own problems but im not technically knowledgeable to figure this out i have googled bad pool header but there are so many different reasons for this happening that i cant find anything pertaining to my situation with start up I want to fix this without formatting again if possible HELP nbsp

A:BSOD "BAD POOL HEADER" on startup

Possible Causes:

NETGEAR Wireless Card: http://www.tweaksforgeeks.com/BAD_POOL_HEADER.html

Indexing Service: http://forums.tweaktown.com/showthread.php?t=18119

USB 2.0: http://www.techspot.com/vb/topic17282.html

More: http://www.google.com/search?q=bad_pool_he...:en-US:official
 

https://forums.techguy.org/threads/bsod-bad-pool-header-on-startup.527500/
Relevancy 91.59%

I am very thankful to have found this forum, thank you for dedicating time to do this.

I upgraded a few things:

Processor: FX6100
Mobo: MSI FX 880GMS-E41
RAM: 2 x 4GB Kingston DD3
HDD: Seagate 1TB 7200


Everything was working fine after upgrade, was able to boot properly. I decided to hook up my A4-Tech G800 Keyboard and Logitech wireless mouse. Then boom, it keeps hanging.

I can boot to Safemode, Safemode w/ Networking. I tried last known config, but when it gets to the desktop - it switches to the BSoD.

I am hoping with the attachment, someone can help me. More power to everyone.

A:BSOD on boot up "Bad Pool Header"

Welcome to SevenForums.

Did you reinstall windows after all these Hardware upgrades?

Uninstall AVG: AVG | Download tools and utilities

Install MSE: Download Windows 7 Upgrade Advisor from Official Microsoft Download Center






Quote:
Microsoft Security Essentials. Recommended from a strict BSOD perspective, compatibility & stability compared to other antiviruses/internet security software. It is free and lightweight:-
Microsoft Security Essentials - Free Antivirus for Windows Malwarebytes - FreeGood and Free system security combination.
Do not start the free trial of Malware Bytes; remember to deselect that option when prompted.

Run a full scan with both (separately) once downloaded, installed and updated.



Perform a clean boot:Troubleshoot Application Conflicts by Performing a Clean Startup

Perform a System File Check:Click on the
Type CMD on Search
Left click and Run as Administrator
Type SFC /scannow
Full tutorial here:SFC /SCANNOW Command - System File Checker

Take memtest. Run for 8 passes and test each stick in a know good slot for an additional 6 passes.
RAM - Test with Memtest86+





Quote:
The goal is to test all the RAM sticks and all the motherboard slots.

Check your motherboard manual to ensure the RAM sticks are in the recommended motherboard slots. Some motherboards have very specific slots required for the number of RAM sticks installed.

If you get errors, stop the test and continue with the next step.

1. Remove all but one stick of RAM from your computer (this will be RAM stick #1), and run Memtest86 again, for 7 passes. *Be sure to note the RAM stick, use a piece of tape with a number, and note the motherboard slot.
If this stick passes the test then go to step #3.

2. If RAM stick #1 has errors, repeat the test with RAM stick #2 in the same motherboard slot. *If RAM stick #2 passes, this indicates that RAM stick #1 may be bad. If you want to be absolutely sure, re-test RAM stick #1 in another known good slot.
*If RAM stick #2 has errors, this indicates another possible bad RAM stick, a possible motherboard slot failure or inadequate settings.
3. Test the next stick of RAM (stick #2) in the next motherboard slot. *If this RAM stick has errors repeat step #2 using a known good stick if possible, or another stick.
*If this RAM stick has no errors and both sticks failed in slot#1, test RAM stick #1 in this slot.
4. If you find a stick that passes the test, test it in all the other motherboard slots.

If Part 2 testing shows errors, and all tests in Part 3 show errors, you will need to test the RAM sticks in another computer and/or test other RAM in your computer to identify the problem.

In this way, you can identify whether it is a bad stick of RAM, a bad motherboard, or incompatibility between the sticks.




   Information
Errors are sometimes found after 8 passes.



   Tip
Do this test overnight, before going to bed.


POst back results.

http://www.sevenforums.com/bsod-help-support/269433-bsod-boot-up-bad-pool-header.html
Relevancy 91.16%

I have two Dell nbsp Inspiron R laptops My quot old quot one I bought direct from Dell in about is special Inspiron Edition"? an 7720 "Special What so 17R the quot new quot one advertised as an quot Inspiron R Special Edition quot nbsp I bought on Ebay a couple of weeks ago I still What is so special about an Inspiron 17R 7720 "Special Edition"? have the original paperwork for the old one from when I purchased it from Dell and there is no mention of quot Special Edition quot in the paperwork Both are identified only as quot Inspiron quot on the label on the underside of the computer and there are no nbsp quot Special Edition quot markings or labeling anywhere on the new computer Hardware is pretty much identical TB Samsung ST LM HN HDDs GB RAM Intel HD Graphics Nvidia GeForce GT M Video D graphics Backlit Keyboard on both The only hardware differences are the old computer has an Intel Core i - QM processor specified by me when I ordered the computer and a GB mSATA SSD while the new computer has nbsp an Intel Core i - M processor and no mSATA SSD nbsp So what makes the nbsp quot Special Edition quot so special Is there REALLY anything different about nbsp quot Special Edition quot computers or was that just some sort of marketing hype

A:What is so special about an Inspiron 17R 7720 "Special Edition"?

The mSATA cache drive was one of the differentiators.  When that system was built, SSDs were appreciably more expensive than they are now.

http://en.community.dell.com/support-forums/laptop/f/3518/t/19996437
Relevancy 89.87%

First BSOD on this machine in 2 yrs (knock knock wood). Blue screen flashed then rebooted. All I saw was the "bad pool caller" statement at top of screen. Sysinfo below and minidump attached. sfc/scannow reported no integrity violations.

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Professional, Service Pack 1, 32 bit
Processor: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz, x64 Family 6 Model 23 Stepping 6
Processor Count: 2
RAM: 3066 Mb
Graphics Card: NVIDIA GeForce 9800M GTS, 512 Mb
Hard Drives: C: Total - 204805 MB, Free - 123226 MB; D: Total - 272132 MB, Free - 181519 MB; E: Total - 305245 MB, Free - 80673 MB;
Motherboard: Gateway, IMV
Antivirus: ESET NOD32 Antivirus 5.0, Updated and Enabled
 

Relevancy 89.87%

Hello! I got a bad pool caller BSOD while playing a game (dirt 3) Here are the files that SF Diagnostic tool put out: Attachment 335798

Thank you in advance!

A:BSOD "Bad Pool Caller"

Hi junglehum.

The crash dump is not very precise about any probable cause.

Test your RAM modules for possible errors. How to Test and Diagnose RAM Issues with Memtest86+
Run memtest86+ for at least 8 consecutive passes.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.
If it does not show any error, enable Driver Verifier to monitor the drivers. Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.



   Information
Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.



   Warning
Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.



   Tip

If you fail to get on the Desktop because of DV, Boot into Advanced Boot Options > Safe mode. Disable DV there. Now boot normally again, and try following the instruction of enabling DV again.
If you cannot boot in Safe mode too, do a System Restore to a point you made earlier.

Let us know the results, with the subsequent crash dumps, if any.
_____________________________________________________

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck C2, {7, 109b, 1, fffff8a011b42310}

GetPointerFromAddress: unable to read from fffff80003510100
GetUlongFromAddress: unable to read from fffff800035101c0
Probably caused by : ntkrnlmp.exe ( nt! ?? ::NNGAKEGL::`string'+2722b )

Followup: MachineOwner
---------

1: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

BAD_POOL_CALLER (c2)
The current thread is making a bad pool request. Typically this is at a bad IRQL level or double freeing the same allocation, etc.
Arguments:
Arg1: 0000000000000007, Attempt to free pool which was already freed
Arg2: 000000000000109b, (reserved)
Arg3: 0000000000000001, Memory contents of the pool block
Arg4: fffff8a011b42310, Address of the block of pool being deallocated

Debugging Details:
------------------
POOL_ADDRESS: fffff8a011b42310 Paged pool

FREED_POOL_TAG: ObSc

BUGCHECK_STR: 0xc2_7_ObSc

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

PROCESS_NAME: svchost.exe

CURRENT_IRQL: 0

ANALYSIS_VERSION: 6.3.9600.17237 (debuggers(dbg).140716-0327) amd64fre

LAST_CONTROL_TRANSFER: from fffff8000340bbe9 to fffff800032d8bc0

STACK_TEXT:
fffff880`0ad8b768 fffff800`0340bbe9 : 00000000`000000c2 00000000`00000007 00000000`0000109b 00000000`00000001 : nt!KeBugCheckEx
fffff880`0ad8b770 fffff800`035f9b0d : 00000000`000000d0 fffff8a0`02a14970 fffff8a0`63416553 fffff8a0`05c80a00 : nt!ExDeferredFreePool+0x1201
fffff880`0ad8b820 fffff800`035ac9c5 : fffff8a0`05c80a00 fffffa80`09ade100 fffff8a0`00000004 fffff8a0`11b42310 : nt! ?? ::NNGAKEGL::`string'+0x2722b
fffff880`0ad8b8e0 fffff800`0359e4c7 : fffff8a0`13... Read more

http://www.sevenforums.com/bsod-help-support/347952-bsod-bad-pool-caller.html
Relevancy 89.44%

"Appcrash", and "General Fault" when loading various warez. I have been getting these often. Some adobe software. Older games like Diablo II. The list goes on and on, I just don't remember which software.

http://www.techsupportforum.com/forums/f217/appcrash-and-general-fault-when-loading-various-warez-266191.html
Relevancy 85.57%

Hi everyone!

Yesterday my HP laptop (Windows 7) started getting BSOD with various types of errors (mostly "STOP: 0x00000F4", "STOP: 0x0000007A", "c00021a" and one "missing %hs, c0000135"). Most of the time it restarts without any issues and works fine right after the BSOD and then an hour or two later I get a BSOD again.

I have tried restoring to Last Known Good Configuration, startup repair, hard disk check, virus scans and I also uninstalled any recently added programs I could think of and cleared up more than 50% of my hard disk space. None of these seem to have helped and I still get BSOD regularly.

I have attached the folder from the SF Diagnostic Tool and would appreciate any advice!
Thank you!

A:BSOD every few hours: mostly "STOP: 0x00000F4", "c00021a" & "c0000135"

Welcome to the forum.

MSINFO32:
Please go to Start and type in "msinfo32.exe" (without the quotes) and press Enter
Save the report as an .nfo file, then zip up the .nfo file and upload/attach the .zip file with your next post.
Also, save a copy as a .txt file and include it also (it's much more difficult to read, but we have greater success in getting the info from it).
------------------------
Upload a screenshot using: CrystalDiskInfo For how to upload a screenshot or file, read here
Test your Hard Drive(s) by running: Hard Drive Diagnostic Procedure
------------------------
Test and Diagnose RAM Issues with Memtest86+: RAM - Test with Memtest86+


   Tip
Pay close attention to Part 3 of the tutorial "If you have errors"
Test the RAM with Memtest86+ for at least 7-10 passes. It may take up to 22 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold.


------------------------
Monitor hardware temperature with system monitoring software like Speccy or HWMonitor. Upload a screen shot of the Summary tab as well:Piriform - Speccy
CPUID - HWMonitor
For how to upload a screenshot or file, read here

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck F4, {3, 87a2e968, 87a2ead4, 83a55cf0}

----- ETW minidump data unavailable-----
Probably caused by : csrss.exe

Followup: MachineOwner
---------
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck F4, {3, 87a7bd40, 87a7beac, 83a1fcf0}

----- ETW minidump data unavailable-----
Probably caused by : csrss.exe

Followup: MachineOwner
---------

http://www.sevenforums.com/bsod-help-support/307397-bsod-every-few-hours-mostly-stop-0x00000f4-c00021a-c0000135.html
Relevancy 82.13%

Hi guys Long story short broke bootloader and mbr but got it sorted eventually after a couple of hours reading and playing with various tools Machine boots back into XP fine with no user interaction However when logging in logs me straight back out I suspect this is because my D partition separate hdd seems to have lost its allocation while I ve been playing with the problem probably should have physically disconnected it first Lesson learnt This drive however as well as storing about TB of (containing login/partition "Special Windows' Failed recovery Folders") data of which I haven t even had time to fully back up before problem occured I know it s ultimately my fault was Failed login/partition recovery (containing Windows' "Special Folders") the location for some of XP s special folders specifically My Documents My Music My Pictures I think they were the Failed login/partition recovery (containing Windows' "Special Folders") only Special Folders I relocated Could their disappearance be causing this issue or will I have other problems somewhere It s the only thing I can think of right now Partition Wizard Home Edition s Partition Recovery Wizard tool is able to find this lost partition but gives a warning when attempting to recover see image I don t know if it plans to copy the data which could of course potentially overwrite itself since I don t have another drive big enough to copy to which I don t want to waste time doing anyway or if it just overwrites rebuilds the partitioning section at the start of the drive Is this operation going to be relatively safe Or is there a generally safer option tool for this I know there s always at least some risk involved Probably not massively worth nothing but I use the traditional style logon Username Password pair prompt and have fast user switching disabled Thanks for any input nbsp

https://forums.techguy.org/threads/failed-login-partition-recovery-containing-windows-special-folders.1059690/
Relevancy 82.13%

I want to use the standard F1-F12 function keys but my Laptop is stuck in "Special Function" mode.
For example: Normally, if I click F11 it'd mute the laptop but now when I click it, it makes the webpage full screen.
I've tried disabling the Special function mode in System settings but there has been no difference.

Any help would be appreciated

https://forum.toshiba.eu/showthread.php?92168-Disabling-quot-Special-Function-Mode-quot-isn-t-working-on-Satellite-C-series
Relevancy 82.13%

Hi everyone,

I'm on a Win2K network, and we have an old folder that contains archival files and folders from some old Mac computers that we used to use. I'm trying to archive that folder onto a CD, but most of the burner programs I've used (Nero, etc.) won't do this, because there are lots of file and folder names with strange special characters in them. I'm assuming this is because these came from Mac filesystems. Is there a way to get rid of all these characters in a batch or global way, a program I can use??

Thanks in advance for your help!

Billy Chen,
Asian & Pacific Islander Wellness Center
www.apiwellness.org
 

https://forums.techguy.org/threads/getting-rid-of-weird-special-characters-in-file-and-folder-names-win2k.130645/
Relevancy 82.13%

During my attempt to troubleshoot some Vista behavior, I checked the logs in the event viewer. While doing that, I noticed under "Security" that the log was humongous. The reason? Every minute, there is a "Special Logon" followed by two "Logon" entries. This just keeps repeating every minute. I cleared the log and rebooted... then monitored the log and the behavior continued.

Why does this happen? Is there some kind of logging that was accidentally turned on? I can't recall what I might have done, as I had to do quite a bit of troubleshooting with another problem... is there something I can check that controls logging? I tried searching the Vista forums and didn't turn up anything matching "Special Logon".

A:"Special Logon" repeats every minute in Security Event Log

Are you able to get a Snip of the Log?

Please see How to Use the Snipping Tool in Vista For More Information

Also does the Log provide any Username?

Many Thanks,
Josh

http://www.vistax64.com/general-discussion/284939-special-logon-repeats-every-minute-security-event-log.html
Relevancy 82.13%

My BF2:Special Forces crashes to the desktop from a black screen after I try running the game. It also destroyed my original BF2 installation as it now does the same thing as special forces. Black screen then desktop. I read that installing patch 1.41 will fix this and I have tried installing the patch many times but all I get is a "PATCHING FAILED" message at around 8% every time. I am losing all hope here. Please help!
 

A:Battlefield 2: Special Forces crash to desktop/ BF2 patch1.41 "Patching Failed"

just brought bf2 wanting to play online couldnt due to old version i got told from a mate to download 1.41 patch dowloaded it installed fine but now when ever i try connect to a server it says invalid cd key which is odd because i registered the game plus can play single player any ideas
 

https://forums.techguy.org/threads/battlefield-2-special-forces-crash-to-desktop-bf2-patch1-41-patching-failed.711649/
Relevancy 82.13%

Hey guys About a month ago I began receiving this bsod quot A clock interrupt was not received on a secondary processor quot Bugcheck code x x x xFFFFF x "Clock Random BSOD received secondary processor" a interrupt not on My System Specs Laptop Clevo p hm Mobo Clevo p hm CPU Intel Core i - QM Random BSOD "Clock interrupt not received on a secondary processor" Processor M Cache GHz RAM GB DDR mhz GPU nVidia geforce gtx m As per the BSOD Instruction thread - Windows x - Original installed OS - Its OEM - The system was purchased brand new in August - The OS was also installed in August by the manufacturer Anyway I have been having frequent bsod's for about a month with the same error listed above For absolutely no reason It would occur while I was watching a youtube video or typing on Word with the cpu under load At first I assumed that it was my i going south so I stress tested my cpu using Intel Burn Test at the maximum settings for runs did so twice and got no errors Then I ran OCCT Linpack for an entire hour at the maximum settings Since that caused absolutely no instability I turned to ram I removed a stick and tested the other using Memtest x then switched Which is why in my dump files I have only gb of ram listed However passes on each stick revealed no errors So now I have turned to drivers and upon running quot verifier exe quot I got a bsod on startup because driver verifier found a faulty driver and crashed the system I come as yes a new user because frankly I have no where else to turn A friend reccomended you guys because you offer great crash analysis and I leaped at the oppurtunity I am frustrated and tired of my system hanging roughly once for every hour of run time I will cruise around on the forums and try to help here and try to be active If you guys would help me I would be forever grateful Thank you So much

A:Random BSOD "Clock interrupt not received on a secondary processor"

Your crash may have been caused by stop-0x101-clock_watchdog_timeout
Please read the link below carefully...

STOP 0x101: CLOCK_WATCHDOG_TIMEOUT troubleshtg

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

If you are overclocking STOP

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.


To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

http://www.sevenforums.com/bsod-help-support/214293-random-bsod-clock-interrupt-not-received-secondary-processor.html
Relevancy 82.13%

Hello I've just returned from my holidays and my snap") by ntoskrnl.exe, random also Chrome ("Oh caused crashes BSOD computer startet to behave rather weird First things I noticed was random quot oh snap quot -errors in Google Chrome I updated Flash Player tried a new Chrome profile and even reinstalled Chrome but nothing helped Tonight I had the first bluescreen while running a backup to my NAS A few minutes ago I had a second BSOD this time while scanning the computer for malware with Spybot Search amp Destroy BSOD caused by ntoskrnl.exe, also random Chrome crashes ("Oh snap") I checked the MiniDumps with BlueScreenView which indicated that they were caused by ntoskrnl exe I have BSOD caused by ntoskrnl.exe, also random Chrome crashes ("Oh snap") no idea BSOD caused by ntoskrnl.exe, also random Chrome crashes ("Oh snap") if the Chrome errors and the bluescreens are related or if this is just coincidence I didn't change any hardware or software lately apart from windows and software updates My hardware i k Gigabyte Z X-U DH GB DDR Memory ASUS GTX Samsung SSD GB WD Black TB WD Green TB Asus Xonar soundcard Antivirus is Avast which I have been using for years now My CPU is oced to GHz but worked stable like this for more than two years now and wasn't using its full boost at the time of the bluescreens If you need further information please request it Any help is much appreciated Thank you Regards Gerrit

A:BSOD caused by ntoskrnl.exe, also random Chrome crashes ("Oh snap")

Welcome to 7F, let's see if we can get you back up and running.



ONE

 ATHEROS NIC DRIVER

Your Atheros NIC driver has been flagged. It's pretty old and could do with updating, check here for an updated version.
Code:
fffff800`00b99270 fffff880`056503dcUnable to load image \SystemRoot\system32\DRIVERS\L1C62x64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for L1C62x64.sys
*** ERROR: Module load completed but symbols could not be loaded for L1C62x64.sys
L1C62x64+0x73dc

0: kd> lmvm L1C62x64
start end module name
fffff880`05649000 fffff880`0566b000 L1C62x64 T (no symbols)
Loaded symbol image file: L1C62x64.sys
Image path: \SystemRoot\system32\DRIVERS\L1C62x64.sys
Image name: L1C62x64.sys
Timestamp: Tue Jul 16 07:56:44 2013 (51E4EEAC)
CheckSum: 0002912C
ImageSize: 00022000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4


TWO

 NVIDIA DRIVER

You've also received a 0x116 VIDEO_TDR_ERROR (Timeout Detection Recovery), this could be a problem with the driver for your GPU, power to the card, heat or a bad card amongst other things.
Let's start by replacing your driver. Download the latest driver for your card from here and follow NVIDIA Drivers - Avoid Problems for the cleanest possible install.
Code:
BugCheck 116, {fffffa8009996010, fffff88004990978, ffffffffc00000b5, a}

*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+13e978 )

3: kd> lmvm nvlddmkm
start end module name
fffff880`04852000 fffff880`05264000 nvlddmkm T (no symbols)
Loaded symbol image file: nvlddmkm.sys
Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
Image name: nvlddmkm.sys
Timestamp: Thu Feb 05 18:01:37 2015 (54D3B001)
CheckSum: 009D4DDE
ImageSize: 00A12000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

http://www.sevenforums.com/bsod-help-support/368797-bsod-caused-ntoskrnl-exe-also-random-chrome-crashes-oh-snap.html
Relevancy 82.13%

I've installed Windows 7 recently on a new computer and I've been getting occasional random BSODs since, always 0x00000050 page fault in non paged area, and it never mentions any file. The first few crashes were while surfing internet on Maxthon browser. I switched to Chrome since and haven't had any BSODs until today. Most of the time I'm playing computer games or poker and sometimes surfing poker forums, and haven't had problems with either, but today I was surfing internet and came upon a PDF file and BSOD happened 3-4 mins later. I'm fairly sure all crashes happened while surfing the net but not 100% sure.

FWIW I ran Windows Memory Diagnostic Tool and it came out OK. Also ran a GPU diagnostic, which came out with errors but mentioned that errors are possible since it's not designed for GPUs with so much memory.

I'd really appreciate any help here, thx

A:Random BSOD 0x00000050 "page fault in non paged area"

Install Service pack 1.
Learn how to install Windows 7 Service Pack 1 (SP1)
Service Pack Center - Microsoft Windows

Your crash dumps are not showing any finite probable cause. In such a situation, it is better to enable Driver Verifier to monitor the drivers.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

Let us know the results, with the subsequent crash dumps, if any.

http://www.sevenforums.com/bsod-help-support/266275-random-bsod-0x00000050-page-fault-non-paged-area.html
Relevancy 82.13%

Greetings,

I'm having "kernel data inpage error" on this computer almost from the beginning. It seems to occur randomly (totally 6 times): watching video, reading pdf, working in 3d modeling program, playing a game, browsing internet. I've read some posts earlier and tried this:

1. run CHKDSK, nothing found
2. run MEMCHECK, nothing found
3. run some WD diagnostic tool for hard drives, nothing found
4. updated bios and chipset to newest drivers (downloaded from manufacturers website)
5. installed management engine interface driver (downloaded from manufacturers website)

Here's infos and minidumps gathered using DM Log Creator tool:
MATEUSZ-2015-02-12__51659,20.zip

Please help.

A:random "kernel data inpage error" BSOD on Lenovo Y50

Hi ShahMatt & Welcome to the forums ^_^,

I have analysed your dump files and below has been provided an analysis of the same for informative purposes :-
KERNEL_DATA_INPAGE_ERROR (7a)
The requested page of kernel data could not be read in. Typically caused by a bad block in the paging file or disk controller error.
Arguments:
Arg1: fffff6fb40000618, lock type that was held (value 1,2,3, or PTE address)
Arg2: ffffffffc000003f, error status (normally i/o status code)
Arg3: 0000000067a7b880, current process (virtual address for lock type 3, or PTE)
Arg4: fffff680000c3530, virtual address that could not be in-paged (or PTE contents if arg1 is a PTE address)

Code:
2: kd> !error ffffffffc000003f
Error code: (NTSTATUS) 0xc000003f (3221225535) - {Bad CRC} A cyclic redundancy check (CRC) checksum error occurred.



Code:
ADDITIONAL_DEBUG_TEXT: Memory Manager detected corruption of a pagefile page while performing an in-page operation. The data read from storage does not match the original data written. This indicates the data was corrupted by the storage stack, or device hardware.


After fixing the stack function name resolution of WinDBG, we get the below stack -

Code:
2: kd> knL
# Child-SP RetAddr Call Site
00 ffffd000`26a866d8 fffff802`2a008013 nt!KeBugCheckEx
01 ffffd000`26a866e0 fffff802`29f08a48 nt!MiWaitForInPageComplete+0x23063
02 ffffd000`26a867d0 fffff802`29ffa021 nt!MiIssueHardFault+0x184
03 ffffd000`26a86890 fffff802`29edbf36 nt!MiResolvePageTablePage+0x15071
04 ffffd000`26a86940 fffff802`29fded2f nt!MmAccessFault+0x1f6
05 ffffd000`26a86b00 00007ffc`4d1814f6 nt!KiPageFault+0x12f
06 00000000`00f5dc20 00000000`00000000 0x00007ffc`4d1814f6


I would suggest you to take a backup immediately.
Below is a list of 3rd party drivers present on the system -


Code:
**************************Thu Feb 12 09:30:10.070 2015 (UTC + 5:30)**************************
Rt630x64.sys Thu Aug 15 11:53:59 2013 (520C73FF)
intelppm.sys Thu Aug 22 14:16:35 2013 (5215CFEB)
dump_storahci.sys Thu Aug 22 17:10:39 2013 (5215F8B7)
TeeDriverx64.sys Thu Sep 5 23:32:18 2013 (5228C72A)
AcpiVpc.sys Wed Sep 25 07:59:03 2013 (52424A6F)
RtsPer.sys Fri Oct 18 11:39:07 2013 (5260D083)
ibtusb.sys Fri Oct 18 21:15:41 2013 (526157A5)
rtsuvc.sys Tue Jan 21 14:42:34 2014 (52DE3A02)
Netwbw02.sys Tue Feb 18 22:27:40 2014 (53039104)
IntcDAud.sys Fri Feb 21 19:20:26 2014 (530759A2)
SynTP.sys Sat Mar 8 01:48:04 2014 (531A297C)
Smb_driver_Intel.sys Sat Mar 8 01:52:54 2014 (531A2A9E)
RTKVHD64.sys Tue Mar 11 18:26:41 2014 (531F0809)
iwdbus.sys Fri Mar 14 03:29:14 2014 (53222A32)
igdkmd64.sys Mon Mar 31 10:48:10 2014 (5338FA92)
nvvad64v.sys Thu Nov 20 21:03:54 2014 (546E09E2)
NvStreamKms.sys Sat Nov 22 13:16:45 2014 (54703F65)
nvlddmkm.sys Sat Dec 13 12:23:17 2014 (548BE25D)
cmderd.sys Fri Jan 30 17:16:12 2015 (54CB6F04)
inspect.sys Fri Jan 30 17:17:28 2015 (54CB6F50)
cmdhlp.sys Fri Jan 30 17:17:29 2015 (54CB6F51)
cmdguard.sys Fri Jan 30 17:17:55 2015 (54CB6F6B)
??????????????????????????????????????????????????????????????????????????????????????``
**************************Tue Jan 27 23:01:23.240 2015 (UTC + 5:30)**************************
cmderd.sys Tue Dec 9 05:06:12 2014 (548635EC)
cmdhlp.sys Tue Dec 9 05:07:31 2014 (5486363B)
inspect.sys Tue Dec 9 05:07:31 2014 (5486363B)
cmdguard.sys Tue Dec 9 05:07:57 2014 (54863655)
??????????????????????????????????????????????????????????????????????????????????????``
**************************Tue Jan 27 22:05:30.162 2015 (UTC + 5:30)**************************
agp440.sys ... Read more

http://www.eightforums.com/bsod-crashes-debugging/61498-random-kernel-data-inpage-error-bsod-lenovo-y50.html
Relevancy 82.13%

Ive recently started getting random BSODs quot PAGE FAULT IN NONPAGED AREA quot stop x It happens frequently at random and usually while the PC is sat doing nothing strangely enough they can happen every mins after loading windows up or not for a few hours while the PC is sitting idle To fix ive tried unplugging all but my OS HDD disconnecting every USB device besides the wireless mouse keyboard taking all but one stick of RAM out running disk check for HDD errors memory diagnostic check system restore but i had no restore points other than one yesterday which was pointless BSOD FAULT find at fix AREA" NONPAGED IN Cannot "PAGE random checking event manager for any clues but im not sure what BSOD at random "PAGE FAULT IN NONPAGED AREA" Cannot find fix to look for in particular though i am getting a hell of alot of capI warning errors about every few minutes running Everest CPU memory HDD stress tests for about an hour driver verifier came back without a problem and these last two to tests i really thought would create a BSOD giving me an opportunity to narrow down the problem but no nothing happened until my BSOD at random "PAGE FAULT IN NONPAGED AREA" Cannot find fix PC was sat idle an hour later and bang another one out of knowhere i used the src scannow cmd and it came up with quot Windows Resource Protection BSOD at random "PAGE FAULT IN NONPAGED AREA" Cannot find fix found corrupt files but was unable to fix some of them Details are included in the CBS Log windir Logs CBS CBS log For example C Windows Logs CBS CBS log quot So i thought the problem was this corrupt file so decided to reinstall windows again or at least a WinRE repair but now when i try to boot OS from DVD i get quot Windows has encountered a problem communicating with a device connected to your computer This error can be caused by unplugging a removable storage device such as an external USB drive while the device is in use or by faulty hardware such as a hard drive or CD-ROM drive that is failing Make sure any removable storage is properly connected and then restart your computer If you continue to receive this error message contact the hardware manufacturer Status Oxc e Info An unexpected I O error has occurred quot just when i thought it was driver related it slaps me with what seems to be a hardware error So i tried unplugging all but one HDD that is empty no OS installed etc and booting win dvd to fresh install again but no the same error Im really stuck now i just dont know what to try usually another forum post will solve my own problem but not this time ive provided some crash dump files from yesterday the times on them show how close together and often the BSODs can be im not sure what to look for i just dont know which part hardware or software is to blame Thanks in advance to anyone willing to help me Forgot to mention it doesnt seem to BSOD in safe mode after about an hour of use another reason to point to software driver errors though the quot faulty hardware xc e quot error says otherwise geez im so confused with this one Attachment

A:BSOD at random "PAGE FAULT IN NONPAGED AREA" Cannot find fix

I've gone through 10 of your dumps and each one points to memory corruption.

Test your RAM using Memtest86+. Let it run until 6-8 passes have completed or errors have been found.
RAM - Test with Memtest86+

You say you've already tested your RAM? What program did you use?

http://www.sevenforums.com/bsod-help-support/235254-bsod-random-page-fault-nonpaged-area-cannot-find-fix.html
Relevancy 82.13%

I have been running into BSOD's on my new computer and just can't seem to figure out what the problem is. I say random in that I can't find a trigger, sometimes I can play skyrim for hours without a BSOD, other times just opening explorer results in an issue.

Computer is a ASUS g74sx-dh72, running Window 7 home premium with all updates installed.

System has passed repeated memtest's though if run immediately after a crash sometimes says that manufactures should be contacted. Otherwise testing sticks in any configuration results in a pass.

Any help would be greatly appreciated and I'm open to any suggestions.

A:BSOD at "random": 0x1a, 0x50, 0x3b ntoskrnl.exe+7cc80

Your AVG Antivirus is the main culprit, remove it and use MSE

Other Dumps point to a Memory Management issue/Memory Corruption, this indicates a possible RAM Defect.
Run Memtest86+ for at least 7 passes.
RAM - Test with Memtest86+

Please remove any CD virtualization programs such as Daemon Tools and Alcohol 120%. They use a driver, found in your dmp, sptd.sys, that is notorious for causing BSODs. Use this SPTD uninstaller when you're done: DuplexSecure - Downloads
You can use MagicDisc as an alternative.

Code:
sptd.sys fffff880`01005000 fffff880`01178000 0x00173000 0x4f524ac0 03/03/2012 20:45:52

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 50, {fffffac00b05ee08, 0, fffff80002f14fe8, 5}

Unable to load image \SystemRoot\system32\DRIVERS\avgidsfiltera.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for avgidsfiltera.sys
*** ERROR: Module load completed but symbols could not be loaded for avgidsfiltera.sys

Could not read faulting driver name
Probably caused by : fileinfo.sys ( fileinfo!FIStreamGet+52 )

PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced. This cannot be protected by try-except,
it must be protected by a Probe. Typically the address is just plain bad or it
is pointing at freed memory.
Arguments:
Arg1: fffffac00b05ee08, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffff80002f14fe8, If non-zero, the instruction address which referenced the bad memory
address.
Arg4: 0000000000000005, (reserved)

Debugging Details:
------------------
Could not read faulting driver name

READ_ADDRESS: GetPointerFromAddress: unable to read from fffff800030fe100
fffffac00b05ee08

FAULTING_IP:
nt!FsRtlLookupPerStreamContextInternal+7c
fffff800`02f14fe8 48396810 cmp qword ptr [rax+10h],rbp

MM_INTERNAL_CODE: 5

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

BUGCHECK_STR: 0x50

PROCESS_NAME: avgidsagent.ex

CURRENT_IRQL: 0

TRAP_FRAME: fffff88006cef040 -- (.trap 0xfffff88006cef040)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=fffffac00b05edf8 rbx=0000000000000000 rcx=fffff8a0116fd728
rdx=0000000000000011 rsi=0000000000000000 rdi=0000000000000000
rip=fffff80002f14fe8 rsp=fffff88006cef1d0 rbp=fffffa8007004800
r8=0000000000000000 r9=fffff88006cef2a0 r10=0000000000000000
r11=fffff88006cef1c0 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei pl nz na pe nc
nt!FsRtlLookupPerStreamContextInternal+0x7c:
fffff800`02f14fe8 48396810 cmp qword ptr [rax+10h],rbp ds:f000:fffffac0`0b05ee08=????????????????
Resetting default scope

LAST_CONTROL_TRANSFER: from fffff80002e77c1f to fffff80002eccc80

STACK_TEXT:
fffff880`06ceeed8 fffff800`02e77c1f : 00000000`00000050 fffffac0`0b05ee08 00000000`00000000 fffff880`06cef040 : nt!KeBugCheckEx
fffff880`06ceeee0 fffff800`02ecadae : 00000000`00000000 fffffac0`0b05ee08 fffff8a0`0d59fc00 fffff8a0`116fd6f0 : nt! ?? ::FNODOBFM::`string'+0x43d41
fffff880`06cef040 fffff800`02f14fe8 : fffff6fc`00000000 fffff8a0`116fd6f0 fffffa80`07004800 00000000`00000000 : nt!KiPageFault+0x16e
fffff880`06cef1d0 fffff880`00d8daae : fffffa80`0badcf20 fffff880`06cef330 fffffa80`07004800 fffff880`012229f4 : nt!FsRtlLookupPerStreamContextInternal+0x7c
fffff880`06cef210 fffff880`00d98da1 : fffffa80`07004800 fffff880`01224e84 fffffa80`09094010 00000000`00000001 : fltmgr!FltpGetStreamListCtrl+0x8e
fffff880`06cef270 fffff880`00e62052 : 0... Read more

http://www.sevenforums.com/bsod-help-support/228401-bsod-random-0x1a-0x50-0x3b-ntoskrnl-exe-7cc80.html
Relevancy 82.13%

This occurs roughly 2 to 3 times a week.Windows 7 SP1 installed July 2011 with random occurrences soon after.

Zip of documents required attached.

Would appreciate any advice.

Thanks,

Attachment 176053

Attachment 176054

A:BSOD Random occurrence "Page fault in non-paged area"

Hi segundus welcome to SF

Please uninstall zone alarm from your system.
http://download.zonealarm.com/bin/fr...load/clean.exe

Download and install Virus, Spyware & Malware Protection | Microsoft Security Essentials

Enable windows firewall.

Update Asus PCProbe Utility yours is old from 2007 ASUSTeK Computer Inc. -Support- Drivers and Download

Finish with the above steps and post back with any results.

http://www.sevenforums.com/bsod-help-support/187574-bsod-random-occurrence-page-fault-non-paged-area.html
Relevancy 82.13%

Computer info Toshiba Satellite L D-S Processor AMD Turion II Dual-Core Mobile M GHz RAM GB System Type -bit Operating System Windows Professional Service Pack My problems began probably a year ago Started having BSOD s regularly with startup issues Nothing I tried fixed anything Had it in a shop where the first time I was told he shutdown, etc "Starting random stuck at BSOD, screen, Windows" quot fixed some things quot and seemed to be working for about a week and a half when it went back to BSOD, random shutdown, stuck at "Starting Windows" screen, etc BSOD s and startup problems getting stuck at the quot starting Windows quot screen etc Took it back to shop where they wiped it and replaced Windows Within a few weeks I was back to the same issues At this point I actually just put the thing away and solely used my husbands computer Last week after not touching my laptop for several months I had to use it due to a major accident with my husbands The thing worked perfectly for days PERFECTLY Then it started randomly shutting down with no rhyme or reason After a couple of times doing that it started getting stuck at the quot starting Windows quot screen and wanting to run Startup Repair With Startup Repair I get Startup Repair cannot fix problems with this info Problem Event Name StartupRepairOffline Problem Signature Problem Signature Problem Signature unknown Problem Signature Problem Signature AutoFailover Problem Signature Problem Signature NoRootCause OS Version Locale Id From the Startup Repair Diagnosis and repair details The only problem listed is Root Cause Found Unspecified changes to system configuration might have caused the problem Repair Action System Restore Result Failed Error Code x f Time Taken ms Repair Action System files integrity check and repair Result Failed Error Code x Time Taken ms I d be so grateful for any assistance that can be provided Please be aware that although I am not a complete novice about fixing or exploring problem issues I am certainly not a tech and have no education either formal or casual I can follow clear directions well and report my results accurately I would sincerely appreciate any help I really cannot spend anymore with a tech when my issues are not resolved by doing so and I NEED the computer My husband owns his own business and I work a small side business from home I have no idea where to even start at this point Thanks so much nbsp

Relevancy 82.13%

Hi This is my first post in this forum actually i found that this is the most helpful forum all over the net Anyway I need a little help solving this BSOD issue please My PC is crashing randomly when I'm away and getting BSOD with the following errors I tried to run quot Disk Defragmenter quot quot Disk Scan quot and quot sfc scannow quot with no results My Hard Drive is an SSD with the capacity BSOD "Multi Crashing Bit XP Bugcheck Codes" Random 64 Win of GB and I have four Additional hard drives each two create a quot RAID quot I'm getting the BSOD randomly and with BSOD Win XP 64 Bit Random Crashing "Multi Bugcheck Codes" out running any application I tried to update all Intel drivers in my machine and quot Jmicron Raid quot as well BSOD Win XP 64 Bit Random Crashing "Multi Bugcheck Codes" with no hope and here is quot Who crashed quot Log System Information local -------------------------------------------------------------------------------- computer name USER- windows version Windows XP x Service Pack build windows dir C WINDOWS CPU GenuineIntel Intel R Core TM i CPU GHz Intel level logical processors active mask RAM total VM free -------------------------------------------------------------------------------- Crash Dump Analysis -------------------------------------------------------------------------------- Crash dump directory C WINDOWS Minidump Crash dumps are enabled on your computer On Tue PM GMT your computer crashed crash dump file C WINDOWS Minidump Mini - dmp uptime This was probably caused by the following module ntoskrnl exe nt x E Bugcheck code x B xC xFFFFF A B xFFFFFADEBC C x Error SYSTEM SERVICE EXCEPTION file path C WINDOWS system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System Bug check description This indicates that an exception happened while executing a routine that transitions from non-privileged code to privileged code This appears to be a typical software driver bug and is not likely to be caused by a hardware problem The crash took place in the Windows kernel Possibly this problem is caused by another driver which cannot be identified at this time On Sun PM GMT your computer crashed crash dump file C WINDOWS Minidump Mini - dmp uptime This was probably caused by the following module ntfs sys Ntfs xF B Bugcheck code x x D xFFFFFADEC E C xFFFFFADEC E BD xFFFFFADEC C ED Error NTFS FILE SYSTEM file path C WINDOWS system drivers ntfs sys product Microsoft Windows Operating System company Microsoft Corporation description NT File System Driver Bug check description This indicates a problem occurred in the NTFS file system The crash took place in a standard Microsoft module Your system configuration may be incorrect Possibly this problem is caused by another driver on your system which cannot be identified at this time Google query ntfs sys Microsoft Corporation NTFS FILE SYSTEM On Tue AM GMT your computer crashed crash dump file C WINDOWS Minidump Mini - dmp uptime This was probably caused by the following module ntoskrnl exe nt x E Bugcheck code x E x x F x FFFF x Error PFN LIST CORRUPT file path C WINDOWS system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System Bug check description This indicates that the page frame number PFN list is corrupted This appears to be a typical software driver bug and is not likely to be caused by a hardware problem This might be a case of memory corruption More often memory corruption happens because of software errors in buggy drivers not because of faulty RAM modules The crash took place in the Windows kernel Possibly this problem is caused by another driver which cannot be identified at this time On Thu AM GMT your computer crashed crash dump file C WINDOWS Minidump Mini - dmp uptime This was probably caused by the following module ntfs sys Ntfs xF B Bugcheck code x x D xFFFFFADEF xFFFFFADEF AA xFFFF... Read more

A:BSOD Win XP 64 Bit Random Crashing "Multi Bugcheck Codes"

Hi talas9 welcome to SevenForums

Try to update your SSD firmware .



   Tip
You do NOT want to Defrag an SSD drive . No need to.


   Tip
I'd personally upgrade to Windows 7 . So you could really get the speed of the SSD drive

http://www.sevenforums.com/bsod-help-support/284491-bsod-win-xp-64-bit-random-crashing-multi-bugcheck-codes.html
Relevancy 82.13%

Original Build october -Processor AMD Phenom II x T -Motherboard Asus M A GTD PRO -Graphics ATI Radeon HD -Hard Drive WD Velociraptor Go -RAM Kingston x Go DDR MHz had to be replaced in february since it had caused me one month of hell damaged cell Replaced with same model -PSU FSP Group W not much written on this -OS Win x quot Company quot edition I'm french and don't know how quot Entreprise quot must be translated sorry Current Build no different builds in between february -Processor same -Motherboard same -Graphics Msi Geforce GTX -Hard Drive Same model but new drive -RAM Corsair XMS x Go MHZ -PSU same -OS same after many reinstalls thanks to the -day period registration I only had to ask my company a second licence Hi fellows I'm getting pretty mad at this Freezes,even "Random" BSOD reinstall during Win and total (BCcode124) my computer "Random" BSOD (BCcode124) and total Freezes,even during Win reinstall can work for an hour without a problem but once a day or so it starts bugging randomly freezing no mouse control nor keyboard and screen frozen or having BSOD like this Had to take Whocrashed Windbg tools is too long to download it always freezes before the end On Sat GMT your computer crashed crash dump file C Windows Minidump - - dmp This was probably caused by the following module ntoskrnl exe nt x A CC Bugcheck code x x xFFFFFA C F x x Error WHEA UNCORRECTABLE ERROR file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System Bug check description This bug check indicates that a fatal hardware error has occurred This bug check uses the error data that is provided by the Windows Hardware Error Architecture WHEA This is likely to be caused by a hardware problem problem This problem might be caused by a thermal issue The crash took place in the Windows kernel Possibly this problem is caused by another driver that cannot be identified at this time On Fri GMT your computer crashed crash dump file C Windows memory dmp This was probably caused by the following module hal dll hal HalBugCheckSystem x E Bugcheck code x x xFFFFFA D xB x B Error WHEA UNCORRECTABLE ERROR file path C Windows system hal dll product Microsoft Windows Operating System company Microsoft Corporation description Hardware Abstraction Layer DLL Bug check description This bug check indicates that a fatal hardware error has occurred This bug check uses the error data that is provided by the Windows Hardware Error Architecture WHEA This is likely to be caused by a hardware problem problem This problem might be caused by a thermal issue The crash took place in a standard Microsoft module Your system configuration may be incorrect Possibly this problem is caused by another driver on your system that cannot be identified at this time As I've seen this looks like a hardware error and this might be confirmed by the fact that while I clean reinstalled Windows x entreprise with a drive format the comp managed to freeze I'm actually having to copy paste this text by parts on a txt file between freezes to expose my problem I kinda didn't know what to do so I've tested my RAM with memtest no errors multiple passes during nights Though I bought new ones Corsair quot just to be sure quot still crashed My Hard drive had bad sectors had it replaced thanks to the warranty still crashed My GPU wasn't so up-to-date Radeon HD and was loud as hell so I decided to upgrade to this GTX from Msi but my comp still freezes and gets the exact same BSOD There's not a single OC on my comp Both he BIOS and the MBdrivers have been updated correctly still fails The RAM frequency and voltage are okay with the builder's I ran multiple tests with OCCT and Prime to determine which of the CPU the MB or the PSU failed That's where I'm unable to analyze With OCCT my CPU heats up to C yet the cores keep around I've read on some forums that C would be a maximum for the PhenomIIx T I'm still no... Read more

A:"Random" BSOD (BCcode124) and total Freezes,even during Win reinstall

Post it following the Blue Screen of Death (BSOD) Posting Instructions.

http://www.sevenforums.com/bsod-help-support/281795-random-bsod-bccode124-total-freezes-even-during-win-reinstall.html
Relevancy 82.13%

I'm getting seemingly random blue screens on a regular basis. Blue Screen View blames ntoskrnl.exe, so make of that what you will.

I no good at computer

OS: Windows 7 home premium 64 bit
Installed 3 weeks ago, when the system was built. I didn't build it, the guys I ordered it from did (hardwareversand)

Any help would be greatly appreciated.

A:Random BSOD, "Unknown Device" error in perfmon

About 1/3 of these crashes are blamed on memory corruption directly. Some of the others indirectly.

These crashes were caused by memory corruption (probably a driver). Please run these two tests to verify your memory and find which driver is causing the problem.

If you are overclocking anything reset to default before running these tests.
In other words STOP!!!
1-Memtest.





Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.



RAM - Test with Memtest86+

2-Driver verifier






Quote:
Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.


Driver Verifier - Enable and Disable
Further Reading
Using Driver Verifier to identify issues with Windows drivers for advanced users

http://www.sevenforums.com/bsod-help-support/208271-random-bsod-unknown-device-error-perfmon.html
Relevancy 82.13%

hey,
Recently I have been getting BSOD's with the error "System Service Exception". I have Windows 7 Ultimate, 64-Bit. All of the parts of my PC are less than 6 months old. The crashes are random. Any help identifying the problem would be appreciated. Thanks

A:BSOD at random times, "System Service Exception"

You have a D-Link DWA-125 Wireless N 150 USB Adapter(rev.A2) - Win7 doesn't like these devices, and when coupled with older (Vista-era) drivers it will spit out BSOD's rapidly! Here's my rant about these devices:





Quote:
I do not recommend using wireless USB devices. Especially in Win7 systems.
These wireless USB devices have many issues with Win7 - and using Vista drivers with them is almost sure to cause a BSOD.
Should you want to keep using these devices, be sure to have Win7 drivers - DO NOT use Vista drivers!!!
An installable wireless PCI/PCIe card that's plugged into your motherboard is much more robust, reliable, and powerful.


Turn off Driver Verifier - it's not putting out any useful information. In general this means that it's either hardware or Windows - but that all depends on the settings that you used to run it.

Video drivers date from 2011, please visit Global Provider of Innovative Graphics, Processors and Media Solutions | AMD and download the most recent version of the video drivers for your system.

Beyond that, please start with these free hardware diagnostics: Hardware Diagnostics

If the above steps don't stop the BSOD's, please zip up and upload any new memory dumps with your next post - and we'll see what we can figure out from there.

The following info is just FYI, I've already addressed the issues that I saw in the above paragraphs

- Further info on BSOD error messages available at: http://www.carrona.org/bsodindx.html
- Info on how to troubleshoot BSOD's (DRAFT): http://www.carrona.org/userbsod.html
- How I do it: http://www.carrona.org/howidoit.html

3RD PARTY DRIVERS PRESENT IN THE DUMP FILES

Code:

AtihdW76.sys Tue Oct 18 03:09:49 2011 (4E9D263D)
Dnetr28ux.sys Wed May 05 04:09:26 2010 (4BE127B6)
ElbyCDIO.sys Thu Dec 16 17:58:13 2010 (4D0A9985)
HECIx64.sys Thu Sep 22 12:38:44 2011 (4E7B6494)
MpFilter.sys Fri Mar 09 06:05:26 2012 (4F59E3F6)
NisDrvWFP.sys Fri Mar 09 06:05:35 2012 (4F59E3FF)
Rt64win7.sys Tue Sep 27 10:50:33 2011 (4E81E2B9)
VClone.sys Sat Jan 15 11:21:04 2011 (4D31C970)
amdxata.sys Fri Mar 19 12:18:18 2010 (4BA3A3CA)
anodlwfx.sys Fri Mar 06 05:10:08 2009 (49B0F680)
asmthub3.sys Wed Nov 02 23:00:32 2011 (4EB203D0)
asmtxhci.sys Wed Nov 02 23:00:22 2011 (4EB203C6)
atikmdag.sys Mon Dec 05 21:52:23 2011 (4EDD8367)
atikmdag.sys Wed Oct 12 15:56:42 2011 (4E95F0FA)
atikmpag.sys Mon Dec 05 21:12:14 2011 (4EDD79FE)
atikmpag.sys Wed Oct 12 15:30:43 2011 (4E95EAE3)

http://www.carrona.org/drivers/driver.php?id=AtihdW76.sys
http://www.carrona.org/drivers/driver.php?id=Dnetr28ux.sys
http://www.carrona.org/drivers/driver.php?id=ElbyCDIO.sys
http://www.carrona.org/drivers/driver.php?id=HECIx64.sys
http://www.carrona.org/drivers/driver.php?id=MpFilter.sys
http://www.carrona.org/drivers/driver.php?id=NisDrvWFP.sys
http://www.carrona.org/drivers/driver.php?id=Rt64win7.sys
http://www.carrona.org/drivers/driver.php?id=VClone.sys
http://www.carrona.org/drivers/driver.php?id=amdxata.sys
http://www.carrona.org/drivers/driver.php?id=anodlwfx.sys
http://www.carrona.org/drivers/driver.php?id=asmthub3.sys
http://www.carrona.org/drivers/driver.php?id=asmtxhci.sys
http://www.carrona.org/drivers/driver.php?id=atikmdag.sys
http://www.carrona.org/drivers/driver.php?id=atikmpag.sys

BSOD BUGCHECK SUMMARY


Code:

Loading Dump File [C:\Users\John\_jcgriff2_\dbug\__Kernel__\071112-12823-01.dmp]
Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
Debug session time: Wed Jul 11 07:04:25.604 2012 (UTC - 4:00)
System Uptime: 0 days 1:49:34.822
BugCheck 24, {1904fb, fffff8800ac6e318, fffff8800ac6db70, fffff80002ad4576}
Probably caused by : ntkrnlmp.exe ( nt!ExpReleaseResourceForThreadLite+46 )
DEFAULT_BUCKET_ID: VERIFIER_ENABLED_VISTA_MINIDUMP
BUGCHECK_STR: 0x24
PROCESS_NAME: VSSVC.exe
FAILURE_BUCKET_ID: X64_0x24_VRF_nt!ExpReleaseResourceForThreadLite+46
Bugcheck code 00000024
Arguments 00000000`001904fb fffff880`0ac6e318 fffff880`0ac6db70 fffff800`02a... Read more

http://www.sevenforums.com/bsod-help-support/239986-bsod-random-times-system-service-exception.html
Relevancy 82.13%

So recently I purchased a new gaming computer Everything was fine for a few days but then I got a random BSOD I thought it was just a simple error I restarted my computer and continued about my business However the BlueScreen keeps occurring on a COMPLETELY RANDOM basis By this I mean I could be on Facebook on a game or even on the desktop and it will occur I don't have time to take a picture of the BlusScreen as it clears and the computer restarts Random STOP "BCCODE | 'a' BSOD. | 0x0000000A: IRQL_NOT_LESS_OR_EQUAL" in a matter of seconds In the thread I have attached the zip folder which contains the result of the diagnostic tool It would be VERY appreciated if someone could read through the files and be able to give me and idea on whats wrong with the computer as I don't want to leave it at the shop I bought it from for a few days Also it would be helpful if someone could tell me what quot STOP x A IRQL NOT LESS OR EQUAL quot actually means Thanks in advance for any help given it is greatly appreciated -lewis

A:Random BSOD. | "BCCODE 'a' | STOP 0x0000000A: IRQL_NOT_LESS_OR_EQUAL"

For knowing about stop 0xA, read here: BSOD Index

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

It it comes clean, enable Driver Verifier to monitor the drivers.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.



   Information
Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.



   Warning
Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.



   Tip

If you fail to get on the Desktop because of DV, Boot into Advanced Boot Options > Safe mode. Disable DV there. Now boot normally again, and try following the instruction of enabling DV again.
If you cannot boot in Safe mode too, do a System Restore to a point you made earlier.

Let us know the results, with the subsequent crash dumps, if any.

http://www.sevenforums.com/bsod-help-support/276919-random-bsod-bccode-stop-0x0000000a-irql_not_less_or_equal.html
Relevancy 82.13%

New windows install on one of my home built workstations I have an appearantly random BSOD It sometimes runs for days sometimes hours I may have multiple issues I have not been around to see it Usually "Driver Power random, BSOD State Failure" I start folding at home stanford project and leave it when BSOD random, "Driver Power State Failure" I am not using the terminal for CAD CAM or FEA I just upgraded to windows for this build so I would fall in the noob catogory for windows user example I just figured out how to unhide all the folders I am also not the only user of this machine so who knows what has been done in the last couple weeks The hardware is all the same as it was running xp with the exception of the harddrive new Intel gb ssd on a fresh OS install from new hd Also the motherboard got a bios update From the name of the BSOD I would guess my drivers need updating but between windows update intel updates and EVGA updates I haven't found any that haven't been updated I updated my forum computer hardware list if you need that Any help fixing this would be great edit files didn't attach properly

A:BSOD random, "Driver Power State Failure"

Sorry for the second post // edit to add files.

http://www.sevenforums.com/bsod-help-support/262945-bsod-random-driver-power-state-failure.html
Relevancy 82.13%

Hi!

I have very little experiance dealing with these types of errors, the full message I recieve is "DRIVER_IRQL_OR_EQUAL (tcpip.sys)". This began a few days ago, and appears to happen at very different rates. I've tried numerous things but none seemed to have helped. Here is the minidump analysis of what's happening during crashes.

I hope somebody can help! I can provide further minidump's if needed.

-Dan

-edit- Changed format, attachment now included, sorry for being blind and missing the post on how to format this!This is very confusing, just now it crashed before I even got logged in fully.. Certain programs haven't even started being loaded..

A:BSOD appearing at random, error message being "tcpip.sys"

Hello Dan, and welcome to Eight Forums.

Please read the instructions here: Blue Screen of Death (BSOD) Posting Instructions, and post back with the needed information. One of our BSOD experts should be by afterwards to further help.

http://www.eightforums.com/bsod-crashes-debugging/44554-bsod-appearing-random-error-message-being-tcpip-sys.html
Relevancy 82.13%

Hello, My name is gorge.
I would like to ask for help with my BSOD problems, sometimes when i open 6+ windows the BSOD pops up.
i used to have a problem with video driver but after follow a lot of steps, i handle to eliminate BSDO from video driver.

Thank you so much for your help and time

A:BSOD Random "CUSTOM_ERROR" Multiple Flash Windows

Configure the system to collect Small Memory Dumps following: Dump Files - Configure Windows to Create on BSOD

http://www.sevenforums.com/bsod-help-support/335969-bsod-random-custom_error-multiple-flash-windows.html
Relevancy 82.13%

Driver symefa64.sys is causing error according to System Events log. User has been using external Insignia Bluetooth Dongle used for external hardware devices while still having Dell Centrino Bluetooth card enabled. Dongle shows as "unknown device" in device manager. Wondering if these two are in conflict and causing the system to misbehave.

http://www.sevenforums.com/bsod-help-support/386801-bsod-random-error-0x1000007e-cause-unknown-driver.html
Relevancy 82.13%

Hello My laptop is a Dv - dx running Windows home edition Service Pack -bit OS when i start up my computer everything is fine it loads up i sign in and the desktop loads up with no problem i've had a problem where my laptop would not respond when closing the lid shutting down restarting hibernating but not so much when i did hibernate it so i have been doing this for the past year it would turn to a blank screen after it says shutting down or any of the other error code: random and "The BSOD: bugcheck 0x0000009f" ones and it will stay on the fan will turn into high gear speed up and the laptop would BSOD: random and error "The bugcheck code: 0x0000009f" get really hot after this i would have to press the power button to turn it off Sometimes while im just doing some easy task like on chrome the laptop will stop responding not even the task manager will come on i would be stuck on a blank screen when i press CTRL ALT DELETE and then a message couple moments later quot Failure to display security and shut down options quot so i would have to power off and start it back up fresh It was only yesterday that after when it was not responding that i tried to restart it logged off was shutting down it took about like minutes of hanging before i got the blue screen DRIVER POWER STATE FAILURE I looked into it and on Bluescreenview were athrx sys b b ntoskrnl exe e c in red i updated my drivers and i shut down couple times with no problems then when i went to shut down later on i got BSOD: random and error "The bugcheck code: 0x0000009f" another blue screen but this time its only ntoskrnl exe e c I dont know how to fix this if all of the stated problems are connected or if this is seperate Sorry for the essay

A:BSOD: random and error "The bugcheck code: 0x0000009f"

Welcome

Dump shows that athrx.sys is still the cause.


Code:
0: kd> !irp fffffa8006901a70
Irp is active with 4 stacks 2 is current (= 0xfffffa8006901b88)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 0 fffffa8003dce050 00000000 00000000-00000000
Unable to load image \SystemRoot\system32\DRIVERS\athrx.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for athrx.sys
*** ERROR: Module load completed but symbols could not be loaded for athrx.sys
\Driver\athr
Args: 00015500 00000000 00000005 00000003
[ 16, 2] 0 e1 fffffa8004b29710 00000000 fffff80003327200-fffffa800387c9f0 Success Error Cancel pending
\Driver\vwifibus nt!PopSystemIrpCompletion
Args: 00015500 00000000 00000005 00000003
[ 0, 0] 0 0 00000000 00000000 00000000-fffffa800387c9f0

Args: 00000000 00000000 00000000 00000000
Upgrading drivers for pre-existing device Open Windows Device Manager.
- Click on the start
- Type Device Management on the search bar
- Hit enter
In the Device Manager locate the device you wish to update the drivers for/look for a
Right-click the device and click Properties.
In the Properties window click the Driver tab.
Click the Update Driver button.
In the Hardware Update Wizard point Windows to the location of the updated drivers on your hard drive
Once drivers have been installed reboot.

Also look for an update on your BIOS version.


Code:
BIOS Version/Date Hewlett-Packard F.10, 10/15/2009

http://www.sevenforums.com/bsod-help-support/253857-bsod-random-error-bugcheck-code-0x0000009f.html
Relevancy 82.13%

Hello So in the past I think months I have been getting some random stack-based BSOD times. buffer" random overrun " driver A at a has BSOD crashes I believe to BSOD at random times. " A driver has overrun a stack-based buffer" have made a connection between those crashes and my leaving my PC open for long BSOD at random times. " A driver has overrun a stack-based buffer" durations of time unattended By that I mean that those crashes almost never happen while I am BSOD at random times. " A driver has overrun a stack-based buffer" actually working but when I leave my PC running and pay no attention to it when I am downloading a game for example Auto Sleep Mode is turned off I do believe this has something to do with my GPU When those crashes first started or around the time anyway I recall that I had trouble installing a program that had nothing to do with my GPU really Popcorn time Still every time I launched the installer my system gave me a BSOD crash Being computer savvy and having had a rich history of crashes caused by my GPU I removed it from my Mobo and turned to my built-in Intel HD GPU The installer worked fine I shut down my PC re-inserted my AMD GPU and everything was okay The program now worked with the AMD GPU inserted the problem appeared to occur while installing particularly Anyway here is a zip file of the minidumb reports Thanks in advance

A:BSOD at random times. " A driver has overrun a stack-based buffer"

Please give us a broader perspective. Post it following the Blue Screen of Death (BSOD) Posting Instructions so that we can check the origin and application of the failing module as determined (WinFLAdrv.sys); which will help us to help you better.

Attach the resulting zip with your reply post, dont create another thread for it.
___________________________________________________________________________

Code:
BugCheck F7, {ffff9e806bf46180, f88002ba01e5, ffff077ffd45fe1a, 0}

Probably caused by : WinFLAdrv.sys ( WinFLAdrv+3dde )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

DRIVER_OVERRAN_STACK_BUFFER (f7)
A driver has overrun a stack-based buffer. This overrun could potentially
allow a malicious user to gain control of this machine.
DESCRIPTION
A driver overran a stack-based buffer (or local variable) in a way that would
have overwritten the function's return address and jumped back to an arbitrary
address when the function returned. This is the classic "buffer overrun"
hacking attack and the system has been brought down to prevent a malicious user
from gaining complete control of it.
Do a kb to get a stack backtrace -- the last routine on the stack before the
buffer overrun handlers and bugcheck call is the one that overran its local
variable(s).
Arguments:
Arg1: ffff9e806bf46180, Actual security check cookie from the stack
Arg2: 0000f88002ba01e5, Expected security check cookie
Arg3: ffff077ffd45fe1a, Complement of the expected security check cookie
Arg4: 0000000000000000, zero

Debugging Details:
------------------
DEFAULT_BUCKET_ID: GS_FALSE_POSITIVE_MISSING_GSFRAME

SECURITY_COOKIE: Expected 0000f88002ba01e5 found ffff9e806bf46180

CUSTOMER_CRASH_COUNT: 1

BUGCHECK_STR: 0xF7

PROCESS_NAME: svchost.exe

CURRENT_IRQL: 0

ANALYSIS_VERSION: 6.3.9600.17336 (debuggers(dbg).150226-1500) amd64fre

LAST_CONTROL_TRANSFER: from fffff88002b9ddde to fffff800032778c0

STACK_TEXT:
fffff880`0df42e38 fffff880`02b9ddde : 00000000`000000f7 ffff9e80`6bf46180 0000f880`02ba01e5 ffff077f`fd45fe1a : nt!KeBugCheckEx
fffff880`0df42e40 00000000`000000f7 : ffff9e80`6bf46180 0000f880`02ba01e5 ffff077f`fd45fe1a 00000000`00000000 : WinFLAdrv+0x3dde
fffff880`0df42e48 ffff9e80`6bf46180 : 0000f880`02ba01e5 ffff077f`fd45fe1a 00000000`00000000 00000000`00000000 : 0xf7
fffff880`0df42e50 0000f880`02ba01e5 : ffff077f`fd45fe1a 00000000`00000000 00000000`00000000 00000000`00000000 : 0xffff9e80`6bf46180
fffff880`0df42e58 ffff077f`fd45fe1a : 00000000`00000000 00000000`00000000 00000000`00000000 fffff880`02b9d24d : 0x0000f880`02ba01e5
fffff880`0df42e60 00000000`00000000 : 00000000`00000000 00000000`00000000 fffff880`02b9d24d 00000000`00000000 : 0xffff077f`fd45fe1a
STACK_COMMAND: kb

FOLLOWUP_IP:
WinFLAdrv+3dde
fffff880`02b9ddde ?? ???

SYMBOL_STACK_INDEX: 1

SYMBOL_NAME: WinFLAdrv+3dde

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: WinFLAdrv

IMAGE_NAME: WinFLAdrv.sys

DEBUG_FLR_IMAGE_TIMESTAMP: 4fe33008

FAILURE_BUCKET_ID: X64_0xF7_MISSING_GSFRAME_WinFLAdrv+3dde

BUCKET_ID: X64_0xF7_MISSING_GSFRAME_WinFLAdrv+3dde

ANALYSIS_SOURCE: KM

FAILURE_ID_HASH_STRING: km:x64_0xf7_missing_gsframe_winfladrv+3dde

FAILURE_ID_HASH: {fba8cf81-b322-2e0b-ca5e-c65ee13fadec}

Followup: MachineOwner
---------

0: kd> lmvm WinFLAdrv
start end module name
fffff880`02b9a000 fffff880`02ba6000 WinFLAdrv T (no symbols)
Loaded symbol image file: WinFLAdrv.sys
Image path: \SystemRoot\SysWOW64\WinFLAdrv.sys
Image name: WinFLAdrv.sys
Timestamp: Thu Jun 21 20:00:32 2012 ... Read more

http://www.sevenforums.com/bsod-help-support/372794-bsod-random-times-driver-has-overrun-stack-based-buffer.html
Relevancy 81.7%

Hello SevenForums A friend of mine brought a Windows Ultimate x laptop saying that he can't log in with his account When he tries to log in it shows this message quot The User Profile Service failed the logon User profile cannot be loaded quot Now I've searched the internet and found a few articles how to fix this denied logon" failed service special profile case access "User the problem I receive error "User profile service failed the logon" special case access denied message The user profile service failed the - Microsoft Community You receive a quot The User Profile Service failed the logon "User profile service failed the logon" special case access denied error message None of these worked I would like to restore the profile not creating a new one I can create a second profile without any problem but if I can I would "User profile service failed the logon" special case access denied like to save the current one I've looked into the event viewer and this is what I see for the problem Error User Profile Service eventID Windows cannot log you on because your profile cannot be loaded Details Access is denied I've also checked how it all started This happened during a shutdown Warning User Profile Service Windows detected your registry file is still in use by other applications or services Detail user registry handles leaked from lt SID gt After this during the first start Error User Profile Service Windows was unable to load the registry Detail The process cannot access the file because it is being used by another process lt Path-to-user-profile gt ntuser dat After this I get an error from User Profile Service basically with the same text Except this one is thrown by the User while the previous one is thrown by the SYSTEM I see a few more Winlogon warnings but those are just notification events And after a restart it always shows the same problem the one I wrote first I can't log in to the account even in Safe Mode it creates a temporary profile Can anyone give me a few tips what could be the problem Thank you all

A:"User profile service failed the logon" special case access denied

Hello Marty, and welcome to Seven Forums.

The tutorial below may be able to help with this error. The "In Preparation" section at the top can help give you a few options to log on with to be able to do the tutorial.

User Profile Service failed the logon. User profile cannot be loaded.

Hope this helps for now,
Shawn

http://www.sevenforums.com/general-discussion/342377-user-profile-service-failed-logon-special-case-access-denied.html
Relevancy 81.7%

Greetings,

I have moved my Users directory to a separate drive as described here. I did not encounter any serious issue, however my special folders are duplicated in the Windows Explorer.

For instance in my user folder I have two Documents folder, one pointing to C:\Users\yannick\Documents and the other to D:\Users\yannick\Documents. C:\Users is a junction that points to D:\Users.

My media files are duplicated as well in Windows Media Player.

Is there a way to get around this?

Thanks.

A:Special folders "duplicated" in Windows Explorer

Originally Posted by yannick


Greetings,

I have moved my Users directory to a separate drive as described here. I did not encounter any serious issue, however my special folders are duplicated in the Windows Explorer.

For instance in my user folder I have two Documents folder, one pointing to C:\Users\yannick\Documents and the other to D:\Users\yannick\Documents. C:\Users is a junction that points to D:\Users.

My media files are duplicated as well in Windows Media Player.

Is there a way to get around this?

Thanks.



When you re-located these user folders, did you use the "Move..." button on the location tab, and then told Windows to move ALL files to the new location? Doing so will eliminate this "duplication" you are experiencing.

The information that I read from following your link says:

Change the location of each data folder (i..e Documents, Pictures, Music) individually using Windows explorer settings.Modify the Windows registry to reflect the new folder locationIf you used the "Move..." button, you should not have needed to manually edit the registry.

http://www.vistax64.com/general-discussion/124584-special-folders-duplicated-windows-explorer.html
Relevancy 81.7%

The "My Videos" user folder is no where to be found so I want to recreate the same folder that once existed. This is one of those special "User Folders" that has the "Location" tab in the folders properties. As you can see in my screenshot of the window that displays after clicking on Start and entering "shell:UsersFilesFolder" in the search box, the folder is missing altogether.

Is there an easy way to create one of these special folders?

A:How do I recreate the special "My Videos" user folder?

If you mean adding new library, try this:
New Library - Create
you'll find and related tutorials there, so I think your problem should be solved in no time
cheers

http://www.sevenforums.com/general-discussion/64754-how-do-i-recreate-special-my-videos-user-folder.html
Relevancy 81.7%

By default I use the "HTML" format for my outgoing Outlook messages. Whenever I need to paste something into my message, such as a portion of a Word doc or a website, I normaly like to do this without any formatting. Normally, when you use the "Rich Text" message format instead of "HTML", you have the "Paste Special" option in the Edit menu which allows you to paste only the text without formatting. Why is this option not available when you use the "HTML" message format?

My current work-around is to paste my selection into Notepad first and then into the e-mail but I was hoping to skip this step.

Any thoughts?
 

A:Why can't I "Paste Special" in MS Outlook HTML message?

If you have office 2002, you should have a little icon at the end of the text that you click. The other option is to set the prefrences to use Word as your E-mail editor.
 

https://forums.techguy.org/threads/why-cant-i-paste-special-in-ms-outlook-html-message.165648/
Relevancy 81.7%

Hi Thanks for taking the time to read this In Vista it is super easy to create a special virtual folder in My Computer that links to a folder Backup to "Remote special Location" remote FTP Thereafter you just open this folder and can drag drop files between your local puter and remote Backup to special "Remote Location" folder server Mine is called quot Remote Backup quot and I use it naturally to move backup copies of stuff to my remote server Vista also has a decent backup utility and MS makes a reasonably decent security recovery suite Live Onecare Not to get into a discussion of the relative merits of those programs but just stating that they are made by MS and or native to Vista It is my understanding that in neither of these programs native backup or L C can you select an FTP virtual folder as a backup location It is not visible in the local drives listing and is not visible in Network locations Neither will accept a path beginning with ftp or the path directly to the special folder by using quot select as text quot from its explorer location Am I missing something Seems to me that if MS went through all the trouble of creating an easy ftp interface virtual folder AND the trouble of creating a backup program native to Vista AND went through the trouble of creating a security recovery suite designed for use in Vista they would marry Backup to special "Remote Location" folder the two in order to create an easy way to provide the real benefit of offsite backups It is just so CLOSE that I think I am missing something Is there any way to get the native backup in Vista to recognize the native quot remote location Backup to special "Remote Location" folder quot folder as a drive or backup location I realize that there are several commercial programs out there that handle stuff like this but I would like to keep it native if I can this time after getting BURNED by quot Norton Ghost quot and an issue thay had with going across a particular chipset forget which one now It would allow you to create images all day long but could not successfully restore one if your MB had this chipset Totally frustrating and meant buying a new computer when all was needed was a new HD So any thoughts on this or advice information would be highly appreciated THANKS

http://www.vistax64.com/network-sharing/216448-backup-special-remote-location-folder.html
Relevancy 81.7%

In Windows XP, fully updated, I have several folders full of mp3's and want to see the bit rate and duration. I right click on a column heading and select "Bit rate". I then click on "More..." so I can get to "Duration", and I select that one too.

But all the figures in the "Duration" column appear to be in "hours" and "minutes", so I see "00:04" or "00:03", but what I want is "minutes" and "seconds".

Any thoughts as to how to change this?
 

A:Solved: Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes"

https://forums.techguy.org/threads/solved-windows-explorer-duration-column-no-seconds-just-hours-and-minutes.693037/
Relevancy 81.7%

So I just built my first not was Interrupt Non-random "Clock received..." BSOD computer Everything went good for about hours I installed the OS updated drivers installed basic programs ran the Windows Experience Index thingy booted Anno and tested a Non-random BSOD "Clock Interrupt was not received..." variety of high graphics settings so on and so forth and everything was good Until on one of my reboots I went into the BIOS and changed the setting from Normal to Performance mode I'm running a Asus Sabertooth FX motherboard Then I booted and ran the Experience Index program again to see if anything would change This time when it was checking CPU performance it BSOD'ed quot Clock Interrupt was not received on a secondary processor within the allocated time interval quot I went into the BIOS and changed the setting back to Normal mode and then tried the WEI again BSOD I tried again and it crashed I ran OCCT for my CPU and everything was good Ran it on my GPU and it was good I ran FurMark for my GPU fine But if I use OCCT to stress my CPU and FurMark to stress my GPU at the same time quot Clock Interrupt was not received on a secondary processor within the allocated time interval quot So far I've come up with theories My GT graphics card is trying to pull too much power from my motherboard and crashing the GT doesn't have external power or My processor is bad I'll run more tests tomorrow to see if any alternate configurations have a different effect Until then I'll leave you with my specs and thank you in advance for any help AMD FX- Asus Sabertooth FX EVGA GT x Cooler Master GX W Windows Professional -bit P S I've ordered a graphics card that draws its power from the PSU to test my first theory EVGA GTX but I won't get it for to days

A:Non-random BSOD "Clock Interrupt was not received..."

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

If you are overclocking STOP
We could also use some system information, which you can get easily by running msinfo32.
To do that go to start>run>type msinfo32>enter

When it is finished running go to file>save>name it and upload to us here.
You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.



To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

http://www.sevenforums.com/bsod-help-support/224029-non-random-bsod-clock-interrupt-not-received.html
Relevancy 81.7%

I have a problem where I keep having the BSOD with the x F error code saying that the file quot ntoskrnl exe quot is the cause I haven't been able to find any solutions which seem to work I tried to update my drivers but that didn't work My problem seems to be at random times sometimes when I try to open a game or when I'm not doing anything And since 'm not that great at solving computer problems I dont have any idea what to do If anyone can help me to solve this problem I would be happy to hear from you My information Windows is - x - original installed OS - an OEM - What is the age of system hardware I bought my laptop in the summer so i think it is approximately - months - What is the age of OS installation have you re-installed the OS I did not change 0X0000009F, BSOD times random at "ntoskrnl.exe" this so about - months

A:BSOD 0X0000009F, "ntoskrnl.exe" at random times

Avast can be a contributing cause of BSOD'S .

Please remove and replace with Microsoft Security Essentials AT LEAST TO TEST.

http://files.avast.com/files/eng/aswclear5.exe

Microsoft Security Essentials - Free Antivirus for Windows

http://www.sevenforums.com/bsod-help-support/217115-bsod-0x0000009f-ntoskrnl-exe-random-times.html
Relevancy 81.7%

Hi, I'm new to this type of error and moderately computer literate. Here's the SF_Diagnostic zip.

The BSOD has happened now 5 times. Twice while surfing the net and 3 times working on MS Word documents. This is my first "homebuilt" system and I only put it together in late November.

Thanks in advance for any help, please let me know if I missed any pertinent info

A:BSOD-"Driver IRQL Not Less" at random times

Welcome.

Please upload your msinfo32.nfo file. To get this: Start Menu -> Type msinfo32 into the Search programs and files box -> When it opens, go to File, Save -> Save as msinfo32.nfo and save in a place you will remember -> Let it finish the process of gathering and saving the system info -> Right click the .nfo file, click send to compressed (zipped) folder -> Upload the .zip file here.

Please upload your msinfo32.txt file. To get this: Start Menu -> Type msinfo32 into the Search programs and files box -> When it opens, go to File, Export -> Save as msinfo32.txt and save in a place you will remember -> Let it finish the process of gathering and saving the system info -> Right click the .txt file, click send to compressed (zipped) folder -> Upload the .zip file here.

Norton is known and contributing to your BSOD crashes, consider uninstalling it with the Norton Removal Tool and replace with Microsoft Security Essentials at least to test.Norton Removal Tool
Microsoft Security Essentials.Recommended from a strict BSOD perspective, compatibility & stability compared to other antiviruses/internet security software. It is free and lightweight:-
Microsoft Security Essentials - Free Antivirus for WindowsMalwarebytes : Malwarebytes Anti-Malware removes malware including viruses, spyware, worms and trojans, plus it protects your computerGood and Free system security combination.




   Warning
Do not start the free trial of Malware Bytes; remember to deselect that option when prompted.

Run a full scan with both (separately) once downloaded, installed and updated.

Perform a System File Check:Click on the start
Type CMD on Search
Left click and Run as Administrator
Type SFC /scannow
Full tutorial here:SFC /SCANNOW Command - System File Checker
Disk Check on your hard drive for file system errors and bad sectors on it:Disk Check
If its wireless, match your device from here:
ATHEROS Wireless drivers for Windows
If its not a wireless, match your device from here:ATHEROS Network drivers for Windows
Let us know the results.

http://www.sevenforums.com/bsod-help-support/272779-bsod-driver-irql-not-less-random-times.html
Relevancy 81.7%

Hello everyone,After searching a lot online i finally decided to post my problem here.
My laptop restarts randomly with an error so called BAD_POOL_HEADER. {This happened even when i'm writing this post }.
I'm not much of gamer, BSOD occurs when im reading PDF's, editing documents, watching movies.
I know i had this problem when i brought my lappy, but it increased since last 2 week.
In my event log i have seen so many critical errors [kernell power event ID:41, Task category : 63 ].
I could not event update to 8.1, every time it crashed when i tried to do an update. So i stopped doing an update.
I hope someone can find a solution to fix my problem.
Thanks in advance.

A:random shutdown, Error- BAD_POOL_HEADER "BSOD"

Event ID 41 errors are simply Windows' way of saying it doesn't know why it shut down.
This can be due to hardware problems, BSOD's, or even just holding the power button down in order to restart the system.
The frequency with which you're experiencing them shows that there's a serious problem here.

Start with these free diagnostics: Hardware Diagnostics Most important (IMO) at this time is the MemTest86+ and Prime 95 diagnostics - they'll tell you if the problem is in your RAM or not. If they pass, then start in on the other diagnostics and let us know your results.

Only 132 Windows Updates installed. Most systems have 160 or more. Please visit Windows Update and get ALL available updates (it may take several trips to get them all).

This device is disabled. Is this deliberate? If so, why?





Cisco AnyConnect Secure Mobility Client Virtual Miniport Adapter for Windows x64 ROOT\NET\0000 This device is disabled.



If not using this device, please uninstall the program that it belongs to. If using it, please re-enable it, then update the program to the latest, Win8 compatible version. Feel free to disable it AFTER it's been updated.
Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable! :

NTIDrvr.sys Mon Apr 19 21:37:59 2010 (4BCD0577)
NTI CD-ROM Filter Driver by NewTech Infosystems (likely a part of Acer Empowering Technology)
http://www.carrona.org/drivers/driver.php?id=NTIDrvr.sys

UBHelper.sys Tue Jul 6 00:19:26 2010 (4C32AECE)
NTI CD &DVD-Maker or NTI Backup NOW! or NTI CD-Maker by NewTech Infosystems (usually in Acer Empowering Technology)
http://www.carrona.org/drivers/driver.php?id=UBHelper.sys

mwlPSDFilter.sys Fri Mar 25 03:12:11 2011 (4D8C404B)
EgisTec Inc. Fingerprint Biometrics
http://www.carrona.org/drivers/driver.php?id=mwlPSDFilter.sys

mwlPSDNServ.sys Fri Mar 25 03:12:13 2011 (4D8C404D)
EgisTec Inc. Fingerprint Biometrics
http://www.carrona.org/drivers/driver.php?id=mwlPSDNServ.sys

mwlPSDVDisk.sys Fri Mar 25 03:12:23 2011 (4D8C4057)
EgisTec Inc. Fingerprint Biometrics
http://www.carrona.org/drivers/driver.php?id=mwlPSDVDisk.sys

If all of this doesn't stop the BSOD's (this includes the hardware diagnostics), please run Driver Verifier according to these instructions: Driver Verifier Settings

Analysis:
The following is for informational purposes only.

Code:
**************************Thu Jul 10 13:53:01.094 2014 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\071114-20343-01.dmp]
Windows 8 Kernel Version 9200 MP (4 procs) Free x64
Built by: 9200.16864.amd64fre.win8_gdr.140309-1509
System Uptime:0 days 0:17:52.864
*** WARNING: Unable to verify timestamp for aswMonFlt.sys
*** ERROR: Module load completed but symbols could not be loaded for aswMonFlt.sys
Probably caused by :Pool_Corruption ( nt!ExFreePool+358 )
BugCheck 19, {e, fffff8a015b0001e, f8a015abe4d80000, 943c5c6e846f2fe7}
BugCheck Info: BAD_POOL_HEADER (19)
Arguments:
Arg1: 000000000000000e,
Arg2: fffff8a015b0001e
Arg3: f8a015abe4d80000
Arg4: 943c5c6e846f2fe7
BUGCHECK_STR: 0x19_e
PROCESS_NAME: SetupHost.exe
FAILURE_BUCKET_ID: 0x19_e_nt!ExFreePool
CPUID: "Intel(R) Core(TM) i3-3227U CPU @ 1.90GHz"
MaxSpeed: 1900
CurrentSpeed: 1896
BIOS Version V2.15
BIOS Release Date 12/21/2012
Manufacturer Acer
Product Name Aspire V5-571P
??????????????????????????????????????????????????????????????????????????????????????``
**************************Thu Jul 10 13:34:39.779 2014 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\071114-20593-01.... Read more

http://www.eightforums.com/bsod-crashes-debugging/49780-random-shutdown-error-bad_pool_header-bsod.html
Relevancy 81.7%

Hi I've got this very weird random distorted BSOD which occurs randomly as far as I can tell when I'm connected to a new Wifi network I e when I connect on my laptop to my home Wifi network this doesn't occur - only when I connect to any new previously-never-been-connected Wifi networks whether it's secured or unsecured I've completed the instructions and attach also the files generated from the instructions Finally here are my specs - Windows Home Premium - OEM version installed on laptop on purchase - Over year old laptop though the problem really began something with - random BSOD do be Wifi? to "distorted" Weird may I think months ago I've also run the full extended diagnostic test that came with the system and it looks like all hardware passed especially Weird "distorted" random BSOD - may be something to do with Wifi? RAM the video adaptor and a full surface scan of the hard disk If anyone could help with this much much appreciated This is incredibly frustrating problem especially since as far as I can tell there is no specific trigger for it Thanks in advance

A:Weird "distorted" random BSOD - may be something to do with Wifi?

As follow up, in case anyone was wondering what I meant when I wrote earlier about the "weird" BSOD I'm getting, here are some snaps of the screen when it happens... It almost feels like I've accidentally crossed into The Matrix...

http://www.sevenforums.com/bsod-help-support/203349-weird-distorted-random-bsod-may-something-do-wifi.html
Relevancy 81.7%

all drivers updated
memtest - no errors
hdd test - no errors

but still getting this error and blue screen:

Event[802]:
Log Name: System
Source: Microsoft-Windows-WER-SystemErrorReporting
Date: 2012-09-18T18:17:14.000
Event ID: 1001
Task: N/A
Level: Error
Opcode: N/A
Keyword: Classic
User: N/A
User Name: N/A
Computer: Daiva-PC
Description:
The computer has rebooted from a bugcheck. The bugcheck was: 0x00000024 (0x00000000001904fb, 0xfffff88002d913f8, 0xfffff88002d90c50, 0xfffff88001312232). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 091812-20950-01.

could some one help me find problem or give some hints?

A:BSOD random and error saying "The bugcheck was: 0x00000024"

Welcome

STOP 0x00000024: NTFS_FILE_SYSTEM BSOD Index

Usual causes: Disk corruption, insufficient physical memory, Device driver, Indexing, Resident antivirus, backup, defrag programs, Disk/Drive failing/failure

Problematic software:

Code:
Start Menu\Programs\ESET Public:Start Menu\Programs\ESET Public
DAEMON Tools Lite "c:\program files (x86)\daemon tools lite\dtlite.exe" -autorun Daiva-PC\Daiva HKU\S-1-5-21-1530937395-1627669387-252134136-1000\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
Please uninstall Daemon Tools, its a known cause for BSoDs.
Also uninstall Eset Antivirus, it has contribution to BSoDs to some extent.

After uninstalling the programs above, run the system file checker and let it repair any damaged windows files.
SFC /SCANNOW Command - System File Checker

Your bug check indicates hard drive failure.

To make sure your hard drive is good run:
Disk Check

Run the short and long tests with SeaTools:

SeaTools for Windows
SeaTools for DOS

Also check for an update on your BIOS version.

Code:
BIOS Version/Date Phoenix Technologies, LTD ASUS P5N73-AM ACPI BIOS Revision 0602, 2009.08.10
Post back results when done.

http://www.sevenforums.com/bsod-help-support/253585-bsod-random-error-saying-bugcheck-0x00000024.html
Relevancy 81.7%

OS: Windows 7 64x SP1
Purchased from a retail, and first OS to be installed
Motherboard: M5A99FX PRO R2.0
CPU: AMD FX(tm_ 6300 Six-Core Processor
Mem: Corsair CMZ16GX3M4A1600C9
AMD Radeon HD 6700 series

Voltages
3.3 V at 3.312 V
5 V at 4.971 V
12 V at 12.097 V
VCORE at 1.320
VDDA 2.5 V at 2.508

CPU offset 1.320v
CPU/NB offset 1.187
CPU VDDAV 2.526
DRAM 1.494
NV 1.116
NV HT 1.214
SB 1.100

SO the computer is only a couple months old. I built it myself. Let me know what else I can give you guys, thanks for the help its been driving me crazy for the last few months.

A:BSOD "Memory Management" Random Crashes

I do see this driver listed on the system > AODDriver2.sys Thu Apr 5 05:23:37 2012
It's the AMD Overdrive driver and can sometimes cause issues in Win 7 & 8.

But lets see if driver verifier can pinpoint which if any particular driver is causing it.
Follow the instructions here, make sure to set a restore point before enabling verifier, also if you do not have Windows disk create a Windows repair disk
http://www.techsupportforum.com/foru...ed-473665.html

http://www.techsupportforum.com/forums/f299/bsod-memory-management-random-crashes-691575.html
Relevancy 81.7%

Having random BSOD Often screen completely black blank Must power off to restart Recent computer rebuild Windows Ultimate x Service Pack build Install Language English United States System Locale English United States Installed AM Enclosure Type Desktop Processor a Main Circuit Board b gigahertz AMD FX- Eight-Core kilobyte primary memory cache kilobyte secondary memory cache kilobyte tertiary memory cache -bit ready Multi-core total Hyper-threaded total Board ASUSTeK COMPUTER INC SABERTOOTH FX R Rev xx Serial Number Bus Clock megahertz BIOS American Megatrends Inc Drives Memory Modules c d Gigabytes Usable Hard Drive Capacity Gigabytes Hard Drive Free Space TSSTcorp CDDVDW SH-S B SATA CdRom Device Optical drive SAMSUNG HD LJ Hard drive GB -- drive s n S UJ KPC rev AA SMART Status Healthy Samsung SSD "Power_State_Driver_Failure" wn usually night/idle Ult @ BSOD Random 7 PRO Series Hard drive GB -- drive s n S RNEAD K rev DXM B Q SMART Status Healthy ST AS Hard drive GB -- drive s n VP XB rev CC SMART Status Healthy WDC WD EARX- PASB Hard drive GB -- drive s n WD-WMAZA rev AB SMART Status Healthy Megabytes Usable Installed Memory Slot 'DIMM ' is Empty Slot 'DIMM ' has MB serial number Slot 'DIMM ' is Empty Slot 'DIMM ' has MB serial number B Local Drive Volumes c NTFS on drive GB GB free e NTFS on drive MB MB free f NTFS on drive GB GB free g NTFS on drive GB GB free h NTFS on Random BSOD usually @ night/idle "Power_State_Driver_Failure" wn 7 Ult drive GB Random BSOD usually @ night/idle "Power_State_Driver_Failure" wn 7 Ult GB free Operating System is installed on c Network Drives None discovered

A:Random BSOD usually @ night/idle "Power_State_Driver_Failure" wn 7 Ult

The BSOD is caused by ASMedia USB 3.0 Hub driver.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa800fbfdbe0, fffff80000b9c3d8, fffffa8018fe7250}

*** WARNING: Unable to verify timestamp for asmthub3.sys
*** ERROR: Module load completed but symbols could not be loaded for asmthub3.sys
Probably caused by : asmthub3.sys

Followup: MachineOwner
---------
And the driver is old.

Code:
fffff880`04da0000 fffff880`04dc4000 asmthub3 T (no symbols)
Loaded symbol image file: asmthub3.sys
Image path: \SystemRoot\system32\DRIVERS\asmthub3.sys
Image name: asmthub3.sys
Timestamp: Thu Nov 03 08:30:32 2011 (4EB203D0)
CheckSum: 0002C529
ImageSize: 00024000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Update it from ASMedia Technology Inc. ????

Otherwise you may get it from SABERTOOTH 990FX R2.0 - Motherboards - ASUS , Version 1.14.3.0 dated 2012.01.30.
Under Support > Download > USB

And, Disable USB Selective Suspend too.
USB Selective Suspend - Turn On or Off

Let us know the results.

http://www.sevenforums.com/bsod-help-support/298251-random-bsod-usually-night-idle-power_state_driver_failure-wn-7-ult.html
Relevancy 81.7%

Hello everyone, I have been getting random BSOD's which seems to be all related to the NTFS.sys and ntoskrnl.exe and I hope someone might be able to tell me the cause of this and how I can solve it.

I uploaded the dumps files like the sticky tells me to.

extra information:

computer name: KENHOUSIAUX-PC
windows version: Windows 7 Service Pack 1, 6.1, build: 7601
windows dir: C:\Windows
CPU: GenuineIntel Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz Intel586, level: 6
8 logical processors, active mask: 255
RAM: 8496668672 total
VM: 2147352576, free: 1945604096

Thank you in advance.

Sincerely Ken Housiaux

A:Random "NTFS related" BSOD crashes.

Hi,

Two dumps attached, IRQL_NOT_LESS_OR_EQUAL (a) and NTFS_FILE_SYSTEM (24). 24 being present is enough to warrant HDD diagnostics as well as RAM testing:

Hard Drive (HDD) Diagnostics - Sysnative Forums

For testing your RAM:

Memtest86+:


Quote:




Download Memtest86+ here:





Quote:





http://www.memtest.org/

Which should I download?

You can either download the pre-compiled ISO that you would burn to a CD and then boot from the CD, or you can download the auto-installer for the USB key. What this will do is format your USB drive, make it a bootable device, and then install the necessary files. Both do the same job, it's just up to you which you choose, or which you have available (whether it's CD or USB).

How Memtest works:

Memtest86 writes a series of test patterns to most memory addresses, reads back the data written, and compares it for errors.

The default pass does 9 different tests, varying in access patterns and test data. A tenth test, bit fade, is selectable from the menu. It writes all memory with zeroes, then sleeps for 90 minutes before checking to see if bits have changed (perhaps because of refresh problems). This is repeated with all ones for a total time of 3 hours per pass.

Many chipsets can report RAM speeds and timings via SPD (Serial Presence Detect) or EPP (Enhanced Performance Profiles), and some even support changing the expected memory speed. If the expected memory speed is overclocked, Memtest86 can test that memory performance is error-free with these faster settings.

Some hardware is able to report the "PAT status" (PAT: enabled or PAT: disabled). This is a reference to Intel Performance acceleration technology; there may be BIOS settings which affect this aspect of memory timing.

This information, if available to the program, can be displayed via a menu option.

Any other questions, they can most likely be answered by reading this great guide here:

http://forum.canardpc.com/threads/28864-FAQ-please-read-before-posting





Regards,

Patrick

http://www.techsupportforum.com/forums/f299/random-ntfs-related-bsod-crashes-700118.html
Relevancy 81.7%
A:Getting a bsod at random times " Probably caused by : L1C62x64.sys"

You have said it right, it is the Atheros network driver that is causing the BSOD.

You need to download the appropriate one from this list: ATHEROS Network drivers for Windows

Now if you upload the msinfo32 file, we can guide you to download the appropriate driver.

So upload your MSINFO32.nfo file.
Click on the start button
Type "msinfo32" (without quotes) in the search bar of the start menu, click the resulting link. It will open the System Information window.
File>Save. In the "File Name" filed, put "MSINFO32" (without Quote), give the save location to desktop, and click the "save" button.
Give the time for processing, it will save a .nfo file on your desktop.
Zip it, and upload it following the instruction.

http://www.sevenforums.com/bsod-help-support/295414-getting-bsod-random-times-probably-caused-l1c62x64-sys.html
Relevancy 81.7%

hello forum i just wanted to share the findings regarding my BSOD error symptoms to get assistance with troubleshooting you should follow the instructions given in http www sevenforums com crashes-d tructions html however as very basic initial steps i personally prefer this approach create a bootable CD for memtest from Memtest - Advanced Memory Diagnostic Tool and let it run for hours if there is just one single error it means your memory is definitely bad if there are no errors your memory is quot most likely quot OK get a copy of BlueScreenView from NirSoft - freeware utilities password recovery system utilities desktop utilities to easily read the crash dumps on my system i was getting sporadic BSOD crashes - each time random stop codes including DRIVER IRQL NOT LESS OR EQUAL IRQL NOT LESS OR EQUAL KMODE EXCEPTION NOT HANDLED MEMORY MANAGEMENT PAGE FAULT IN NONPAGED AREA PFN [SOLVED] BSOD "ntoskrnl.exe+7cc40" random around LIST CORRUPT POOL CORRUPTION IN FILE AREA SYSTEM SERVICE EXCEPTION SYSTEM THREAD EXCEPTION NOT HANDLED i wasn't able to make out any pattern the only thing in common was the crash address that would always be quot ntoskrnl exe cc quot in many cases the crash dumps will indicate a particular driv r to be causing the trouble but with my system this was not the case by coincidence i had identified a pattern how to reproduce a BSOD by doing certain actions in a pre-defined sequence so this would allow me to proceed with systematic troubleshooting in the end it turned out [SOLVED] random BSOD around "ntoskrnl.exe+7cc40" i was using some defective RAM - or quot strange quot RAM at least it took me quite a while because [SOLVED] random BSOD around "ntoskrnl.exe+7cc40" of the following reasons BSOD seemed to occur randomly sporadically BSOD was showing random stop codes memtest did not show any erros conclusion i would recommend the following approach use memtest to check if there are any quot obvious quot errors with your RAM use BlueScreenView to check if any device driv r seems to be causing the error in case you're getting quot random quot errors like me as outlined above take one more closer look at your RAM in case this still doesn't get you any further follow the posting [SOLVED] random BSOD around "ntoskrnl.exe+7cc40" instructions to attach the required files the guys on this forum are doing a great job and will most likely be able to point you in the right direction for additional troubleshooting cheers francoiste

A:[SOLVED] random BSOD around "ntoskrnl.exe+7cc40"

my memory was showing these strange symptoms due to physical damage.
please see the <attached picture>.

if you look at the photograph it appears just so obvious.
but believe me, you won't detect it with your bare eyes.
you need either a magnifying glass or (as in my case) a high-end photographic camera with super zoom.

note: i'm not sure if this damage was there right from the beginning (DOA) or caused by my excessive testing (adding, removing, swapping the memory modules endless times).

anyhow,
so what's the message?

first: be very careful when inserting your memory modules into the slots.
some brands / modules don't have a very robust design, obviously.

second: the scary part is that neither memtest nor windows detected any errors when doing a memory validation.
the only visible symptoms: the physical damage led to sporadic errors (blue screens) during regular operation.
so it's still very difficult to tell whether a memory module is 100% OK or just 99% OK ...
cheers, francoiste

http://www.sevenforums.com/bsod-help-support/190800-solved-random-bsod-around-ntoskrnl-exe-7cc40.html
Relevancy 81.7%

Hello guys Please forgive me for my bad spelling A few weeks ago I bought a new Asus U SD laptop Becasue im a cheap I mode. happening random, also i BSOD "sleep" when into go at bought the cheap laptop versions and installed a SSD on my own BIG MISSTAKE that way i saved around euro and got BSOD happening at random, also when i go into "sleep" mode. better SSD So I got home used the Intel SSD cloning Software and cloned the normal HD over to the SSD Opened the computer and installed the SSD So far so good Then about h later when I was just about to have a big powerpoint presentation my computer got a BSOD and died When I tried to boot it up I only came to the BIOS First I though my SSD had died God I wish that was the case But when I got home and was about to call the seller and report the problem the computer worked Its super strange because I tried to reboot it BSOD happening at random, also when i go into "sleep" mode. atleast times a school and my laptop could not find a OS First I though quot hey maybe it healed quot but after a few Hours of use I noticed how it freezed and died Same shit only BIOS no OS After about reboots it all worked nicely again I called Asus and they said that I should reinstall Win so I did that Reinstalled it and got BSOD happening at random, also when i go into "sleep" mode. all the new Drivers and all the updates on Win upate Used it for days and BAM SHIT HITS THE FAN it freezez and dies I was in a state of pure rage Maybe its not the OS maybe the fimware on my SSD that is old or maybe some settings are wrong So I went to INTEL forums to fix this I got the Intel tool box to change my settings and look for updates When that was done I though I had fixed it for real this time Ive been spending days now working on a school paper and out of no were I get s of lagg and it dies At least this time I can boot to WIN directly and not get stuck in Bios for min Something about the intel update made the laptop find the OS Since then about min my laptop have died one more time I really need to fix this It affects my homework so much and sickens me even more I got the two DMP files and will attach them Hope you guys can help me Since I replaced the SSD by my self Asus refuses to help me at all Thank you all and sorry again for my spelling

A:BSOD happening at random, also when i go into "sleep" mode.

I updated the BIOS on my Laptop just a minute ago. Time will tell if it did any difference. Is my chase just dull or am I not posting good enough information? Just wounder why no one replies. Thank you

http://www.sevenforums.com/bsod-help-support/193885-bsod-happening-random-also-when-i-go-into-sleep-mode.html
Relevancy 81.27%

Hello folk of Windows 7 Support Forums,
I've been having a lot of issues lately. It is a custom build, and I made it around June of last year. Recently, (in the past week) I have been getting a lot of blue screens. At first, I was getting Page Fault in Non Paged Area, since update drivers, trying memtest, and driver verifier, it is beginning to frequently blue screen with Special Pool Detected. I am using Blue Screen View. I have ran Check Disk with no errors. Whenever I play games (such as Chivalry, League of Legends, etc) they crash as well. I have updated my Nvidia Graphics driver from the site. Any help would be thoroughly appreciated. My dump info is attached.

A:BSOD's Galore, Mostly Special Pool Detected

I forgot to mention that (according to BluescreenViewer) ntoskrnl.exe has been involved with every blue screen.

http://www.sevenforums.com/bsod-help-support/280926-bsods-galore-mostly-special-pool-detected.html
Relevancy 81.27%

For the past few days I've been experiencing random BSODs The computer can be idle and still do it I've already ran memtest to see pool BSOD memory Special corruption - if my memory were faulty I did test them one at a time to be make sure and neither have any problems Vista Ultimate AMD Athlon X GB Ram BFG GTX Three hard drives The BSOD error shows the following Special Pool memory corruption x c xba ef xba eb x c x I also looked into the event viewer and these showed up as an error Event filter with query quot SELECT FROM InstanceModificationEvent WITHIN WHERE TargetInstance ISA quot Win Processor quot AND TargetInstance LoadPercentage gt quot could not be reactivated in namespace quot root CIMV quot because of error x Events cannot be delivered through this filter until the problem is corrected Log Name System Source EventLog Date AM Event ID Task Category None Level BSOD - Special pool memory corruption Error Keywords Classic User N A Computer ToNiX Description The previous system shutdown at AM on was unexpected Event Xml lt Event xmlns quot http schemas microsoft com win events event quot gt lt System gt lt Provider Name quot EventLog quot gt lt EventID Qualifiers quot quot gt lt EventID gt lt Level gt lt Level gt lt Task gt lt Task gt lt Keywords gt x lt Keywords gt lt TimeCreated SystemTime BSOD - Special pool memory corruption quot - - T Z quot gt lt EventRecordID gt lt EventRecordID gt lt Channel gt System lt Channel gt lt Computer BSOD - Special pool memory corruption gt ToNiX lt Computer gt lt Security gt lt System gt lt EventData gt lt Data gt AM lt Data gt lt Data gt lt Data gt lt Data gt lt Data gt lt Binary gt D D FA D D FA C C lt Binary gt I haven't done anything software hardware related in the past two or three weeks so I have no clue as to whats causing this I've included the dump file for the latest BSOD If there is anymore information that I can supply please let me know I greatly appreciate any help

A:BSOD - Special pool memory corruption

This is (most likely) a malware issue or a corrupted driver IMO. This is also a Driver Verifier enabled minidump - please include information such as this in future posts. Please describe, in detail, what you've attempted to do to fix the issue - including links to any other online work.

Also, it's not usually sufficient to diagnose a Blue Screen issue from just one mini-dump - so please include all minidumps when posting here.

Please post over in the malware forums to ensure that your system is clean. The reason for this is the unidentified driver apx1gadg.SYS The forums are located here: http://www.techsupportforum.com/f50/

Once assured that you're clean, then try this:

Check to see if you have a program called Counter Spy installed. If so, uninstall it (making sure that you have other protection available if that's the only one you have on your system). The BSOD points to sbapifs.sys - a component of Counter Spy.

Finally, once you've accomplished all of this, ENSURE that you've turned Driver Verifier off. Leaving it on will make the system more unstable.

Here's the analysis:

Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\FUBAR-RC1-Desktop\TempDUMP\DATA\01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows Server 2008/Windows Vista Kernel Version 6002 (Service Pack 2) MP (2 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 6002.18005.x86fre.lh_sp2rtm.090410-1830
Machine Name:
Kernel base = 0x82001000 PsLoadedModuleList = 0x8210e930
Debug session time: Thu Aug 13 05:41:48.028 2009 (GMT-4)
System Uptime: 0 days 2:06:57.900
Loading Kernel Symbols
...............................................................
................................................................
...................
Loading User Symbols
Loading unloaded module list
........
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck C1, {ba41ef78, ba41eb04, 83408c, 32}

Unable to load image \SystemRoot\system32\DRIVERS\sbapifs.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for sbapifs.sys
*** ERROR: Module load completed but symbols could not be loaded for sbapifs.sys
Probably caused by : sbapifs.sys ( sbapifs+a17a )

Followup: MachineOwner
---------

0: kd> !thread;!analyze -v;r;kv;lmtn;lmtsmn;.bugcheck;.logclose;q
GetPointerFromAddress: unable to read from 8212d6dc
THREAD 88d98250 Cid 0e38.15c8 Teb: 7ffdf000 Win32Thread: fc488e90 RUNNING on processor 0
IRP List:
Unable to read nt!_IRP @ b9f7ee00
Not impersonating
GetUlongFromAddress: unable to read from 82106b54
Owning Process 88d986c0 Image: SearchProtocolH
Attached Process N/A Image: N/A
ffdf0000: Unable to get shared data
Wait Start TickCount 488323
Context Switch Count 40
ReadMemory error: Cannot get nt!KeMaximumIncrement value.
UserTime 00:00:00.000
KernelTime 00:00:00.000
Win32 Start Address 0x00f3c799
Stack Init ad22c000 Current ad22bb48 Base ad22c000 Limit ad229000 Call 0
Priority 9 BasePriority 8 PriorityDecrement 0 IoPriority 2 PagePriority 5
ChildEBP RetAddr Args to Child
ad22b6dc 820c7f95 000000c1 ba41ef78 ba41eb04 nt!KeBugCheckEx+0x1e
ad22b7d4 820e5b98 ba41ef78 0000000... Read more

http://www.techsupportforum.com/forums/f299/bsod-special-pool-memory-corruption-404267.html
Relevancy 81.27%

It's hard to describe so I will also upload a picture I noticed this issue about a week ago basically the up arrow down arrow left arrow right arrow check-marks like I said quot special characters quot I don't know what else to call them are showing up as blank little squares On games online wherever they appear they appear as blank little boxes I've uninstalled and re-installed my graphics driver already ran the SCF scannow was recommended by someone on windows forum and that came back without any results They also asked about a language pack but if I do have one installed I don't know how where to with "special Strange characters"? issue look for it Checked windows updater Strange issue with "special characters"? didn't see any language packs I can't use system restore either as it jumps from days ago to Strange issue with "special characters"? months ago Anyone got any ideas Fyi the picture I've uploaded is from Elsword There should be up-arrows insinuating an increase in a stat where the annoying red box is This is NOT a problem with the keyboard the arrow-keys on the keyboard work just fine

A:Strange issue with "special characters"?

Just a minor update, I found out that if I send (↑ or ↓) any special characters through something like a IM chat, it appears as those same boxes to me, but the person on the other end see the directional arrows.

I uploaded another picture showing what appears in the chatbox.
Basically, any special characters that I input through a combination of alt + (2 random numbers from the number pad) all show up as boxes.

I hope this might help some one identify the problem.

http://www.techsupportforum.com/forums/f217/strange-issue-with-special-characters-655111.html
Relevancy 81.27%

PC World is offering its readers an opportunity to download "Driver Updates", by Touchstone Software, for $24.95. Has anyone taken advantage of this offer and, if so, how well satisfied are they with it? TIA.
 

Relevancy 81.27%

ihave some online courses i am taking. them sent me a loaded nano marked "special" on the back. win xp does not recognize it nor does itunes. the computer does nto see it at all. the darn thing will not hook up to my car device to play in the car, as it says device not recognized. so i have to get a hack or software or somehting to allow me to copy the protected contents onto my own ipod so i can listen in the car. anyone know where i can get software to allow this? thx !

A:ipod nano "special" protected

Contact the people at your online course for instructions on how to use the nano.

http://www.techsupportforum.com/forums/f10/ipod-nano-special-protected-523275.html
Relevancy 81.27%

Hi everyone

i found this forum when im looking for way to disable this protection, sometimes i need to delete some folders and i cant, im tired of "Special Permissions"

how can i disable this forever? (and to any file, total control)

A:Disable forever. "Special permissions"

Hi, dj23, and welcome to the forums.

Please see our tutorial at User Account Control - UAC - Change Notification Settings

http://www.sevenforums.com/system-security/2267-disable-forever-special-permissions.html
Relevancy 81.27%

Hello Yestarday I was using my computer and it froze completely Only thing I could do is Alt Tab but it wouldnt bring up anything So I restarted it using the button on the computer itself After that the quot for case. inconvenience.." the "We special apologize We apologize for the inconvenience but Windows did not start successfully A recent hardware or software change might have caused this quot message came up I have the options Start in safe mode Safe mode with networking "We apologize for the inconvenience.." special case. Safe mode with command prompt Last known good configuration setting most recent setting that worked Start Windows normally and everything there "We apologize for the inconvenience.." special case. is a countdown for starting windows normally but for some reason my arrow keys dont work I tried both num pads and the normal arrow keys and nothing works including enter I know that the problem is not the keyboard because I managed to open the quot Phoenix - AwardBIOS CMOS Setup Utility quot and it works just fine After the countdown is finished the windows XP logo appears with the loading bar under it and it stays like that for really long after a while it restarts itself and same thing happens over and over I have my windows XP cd but the problem is that my CD drive is broken - it doesnt open I ve tried unpluging everything from the computer exept the keyboard and the monitor same thing - quot We apologize for the inconvenience quot appears and the arrow keys dont work Only thing I can do at the moment is using the quot Phoenix - AwardBIOS CMOS Setup Utility quot Are there any settings I can change there to make it work nbsp

Relevancy 81.27%

Hi Dears,
I have install a application , for run windows show Unknown Publisher,
can you help me for allow only for it, and so work in regular users without prompt "Unknown Publisher"?

Thanks for your helps,

https://social.technet.microsoft.com/Forums/en-US/b7a654e5-cfad-4a23-b324-c4469baeedcd/allow-quotunknown-publisherquot-for-a-special-application?forum=w8itprogeneral
Relevancy 81.27%

Uncommon situation of a common problem here are the facts -Home network of pcs and laptops -all machines work fine -the problem exists in one of the two laptops i can surf the net without problems except when visiting a certain website that s when the message Internet Explorer cannot display the webpage appears The same message when using Firefox in the same laptop Also unable to login with ftp client in the site s hosting server also unable to send "..... the Special cannot webpage" Solved: display receive email through the particular domain In all other Solved: "..... cannot display the webpage" Special pc s i can visit the certain website without problems fast and easy - all computers are connected to internet through the same router modem not an ISP problem - all computers share the same IP address not an IP ban problem As mentioned above the site is available through any other machine in the network not a server down quot problem Any ideas would be greatly appreciated Thanks OS Version Microsoft Windows Vista Home Premium Service Pack bit Processor Intel R Core TM Duo CPU T GHz x Family Model Stepping Processor Count RAM Mb Graphics Card NVIDIA GeForce M GT Hard Drives C Total - MB Free - MB D Total - MB Free - MB E Total - MB Free - MB Motherboard TOSHIBA ISRAA AB Antivirus Windows Essentials Updated Yes On-Demand Scanner Enabled The TSG SysInfo mentions Norton Internet Security here yet this is not in use since a long time now Therefore it is replaced by quot Windows Essentials quot as the the system s antivirus utility nbsp

Relevancy 80.84%

I keep getting a random BSOD I also have certain programs that will freeze with quot Not Responding quot and will not close and cant be closed with End Task This effects ShutDown as it will not shutdown Below is an excerpt from Using WhoCrashed On Thu PM GMT your computer crashed crash dump file ntoskrnl.exe Random BSOD "DRIVER_IRQL_NOT_LESS_OR_EQUAL" C Windows Minidump - - dmp uptime This was probably caused by the following module ntoskrnl exe nt x C Bugcheck code xD xA x x xFFFFF D C Error DRIVER IRQL NOT LESS OR EQUAL file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System Bug check description This indicates that a kernel-mode driver attempted to access pageable memory at a process IRQL that was too high This appears to be a typical software driver bug and is not likely to be caused by a hardware problem The crash took place in the Windows kernel Random BSOD "DRIVER_IRQL_NOT_LESS_OR_EQUAL" ntoskrnl.exe Possibly this problem is caused by another driver which cannot be identified at this time This doesn't really help me much I have uploaded my dump files from C Windows MiniDump to here https www dropbox com s zlj vkjjc ucwxe Minidump zip for analysis Any help to point me in the right direction would be much appreciated Thanks

A:Random BSOD "DRIVER_IRQL_NOT_LESS_OR_EQUAL" ntoskrnl.exe

All of your dump fiels are Identical and all point to the same thing:


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck D1, {a, 2, 0, fffff8800125a4c5}

*** WARNING: Unable to verify timestamp for sptd.sys
*** ERROR: Module load completed but symbols could not be loaded for sptd.sys
Probably caused by : sptd.sys ( sptd+47044 )

Followup: MachineOwner
---------
Driver Reference Table - sptd.sys

Remove Daemon tools/ alcohol 120% and then download and run this tool:

DuplexSecure - Downloads

If the uninstall button is grayed out your done and can close the window, if not click the uninstall button and let the tool do its job. DO NOT click the install button it will instal la driver known to cause BSODs.

http://www.sevenforums.com/bsod-help-support/284127-random-bsod-driver_irql_not_less_or_equal-ntoskrnl-exe.html
Relevancy 80.84%

Hi all I have been struggling with this for some time so I will try to describe everything I've done to date I have Windows Professional Bit The hardware is under years old I have recently re-installed during BSOD's "Starting Windows" Random the OS but the trouble predates that Since last June I have been receiving BSOD's after the Post but during Starting Windows screen They all seem to revolve Random BSOD's during "Starting Windows" around quot ntoskrnl exe quot and my WhoCrashed program has consistently indicated its a driver issue So I started peeling back the layers I took out the SLI'd second video card Still happened I uninstalled Norton still happened I ran the RAM diagnostic tool everything came back clean It hit a spike recently and I RMA'd my motherboard That was a week ago I installed Windows on a brand new hard drive to mitigate variables It worked great for Random BSOD's during "Starting Windows" days then today BAM my first BSOD since the rebuild This BSOD is consistent with the ones I was receiving before the rebuild It seems to be random I can go a week with no BSOD and then BSOD repeatedly for the next several days I'm slowly being driven insane little by little I have used the UniBlue driver scanner and it tells me everything is up to date except for the Marvell Driver which is a raid controller and a controller that I have nothing plugged into I did not install that this most recent build Could it be a RAM problem A BIOS issue I am not a pro at the BIOS configuration but it doesn't quot feel quot like that's the problem since it consistently boots etc Anyway I put myself at the forum's mercy Thanks in advance

A:Random BSOD's during "Starting Windows"

These crashes were caused by memory corruption/exception (cx05) probably a driver.
Please run these two tests to verify your memory and find which driver is causing the problem.

* If you are overclocking anything reset to default before running these tests.
In other words STOP!!!

* If you have raid update its Driver.

Memtest.





Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.



RAM - Test with Memtest86+

Driver verifier






Quote:
Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

So, I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Special Pool", "Force Pending I/O Requests" and "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen.
Continue to use your system normally, and if you know what causes the crash, do that repeatedly.
The objective here is to get the system to crash because Driver Verifier is stressing the drivers out.
If it doesn't crash for you, then let it run for at least 36 hours of continuous operation.

Reboot into Windows (after the crash) and turn off Driver Verifier by going back in and selecting "Delete existing settings" on the first page, then locate and zip up the memory dump file and upload it with your next post.

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.

http://www.sevenforums.com/bsod-help-support/221636-random-bsods-during-starting-windows.html
Relevancy 80.84%

Hey guys Lately some odd things have been happening with my computer A couple of days ago my computer refused to POST when NDIS.sys BSOD Random "driver_irql_not_less_or_equal" - I started it up and sat on a blank screen indefinitely So I force shut it down and restarted it and it started right up I have no idea if this is related to my problem or not but I thought I'd say it Anyways tonight I was browsing the internet and my computer BSOD'd for the Random BSOD - NDIS.sys "driver_irql_not_less_or_equal" first time since I've had it I restarted Random BSOD - NDIS.sys "driver_irql_not_less_or_equal" and thought I'd see if it would happen again Within minutes it BSOD'd again with the exact same error that is in my title Any idea why all of a sudden this is happening and why its so random I've been on it for minutes now since the last BSOD If it matters both times I was playing Runescape Since then I haven't been playing it and no BSOD Basic specs - Windows x - Original OS was Vista x for months In October of I upgraded it with Windows - Vista was full retail is an upgrade - I build this computer in May of so it's about years old now - OS was installed in March or April of after having an audio issue for a few weeks

A:Random BSOD - NDIS.sys "driver_irql_not_less_or_equal"

Code:
ASACPI.sys Sun Mar 27 20:30:36 2005 (42476C4C)
Older versions of ASACPI.SYS are a known BSOD problem on Windows 7. Update the driver by:Going to the Asus motherboard support site
When you reach the website:
Scroll down the page and click Utilities
Hold Ctrl and press f (ctrl+f) to enter the browser's find feature
Search for "ATK0110 driver for WindowsXP/Vista/Win7 32&64-bit" (without quotes)
Download and install the driver.
After installation is complete, verify that it installed correctly.Click Start Menu
Click My Computer
Go to C:\WIndows\System32\drivers\
Verify that the ASACPI.SYS file is dated 2009 or newer (2010,etc.)


Crashes are being caused by L1E62x64.sys, your Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller (NDIS6.20) driver. You should be able to obtain an updated driver for it from your motherboard support site. Do not download the beta version. Use Version 10045/10018/10040 from ASUS - Motherboards- ASUS P5Q PRO under LAN.

To fully re-install a driver, use the following steps.First, download the latest driver. Then do the next steps.
Click Start Menu
Right Click My Computer/Computer
Click Manage
Click Device Manager from the list on the left
Find the device you are trying to uninstall by expanding Network adapters
Right click the device
Click Uninstall (do not click OK in the dialog box that pops up after hitting Uninstall)
Put a tick in Delete driver software for this device (if this option is available, otherwise just hit OK) and hit OK
Restart your computer only if Windows asks you to.
Install the latest driver for the device.

Alternatively:Login as an adminstrative user.
First, download the latest driver. Then do the next steps.
Click Start Menu
Click Control Panel
Click Hardware and Sound
Click Device Manager (the last link under Devices and Printers)
Find the device you are trying to uninstall by expanding Network adapters
Right click the device
Click Uninstall (do not click OK in the dialog box that pops up after hitting Uninstall)
Put a tick in Delete driver software for this device (if this option is available, otherwise just hit OK) and hit OK
Restart your computer only if Windows asks you to.
Install the latest driver for the device.

http://www.sevenforums.com/bsod-help-support/234249-random-bsod-ndis-sys-driver_irql_not_less_or_equal.html
Relevancy 80.84%

Ok I'm trying to get some work done but I keep getting random BSOD and it's the busiest time of year for me so I can't spend a lot of time )" BSOD Random nt!KiSwapContext+ba "ntkrnlmp.exe ( researching the problem and need to reach out to you guys I really appreciate any and all help Below is the dump file Does it have something to do with Foxit Reader I usually have Random BSOD "ntkrnlmp.exe ( nt!KiSwapContext+ba )" that program Random BSOD "ntkrnlmp.exe ( nt!KiSwapContext+ba )" running x for work Code Microsoft R Windows Debugger Version AMD Copyright c Microsoft Corporation All rights reserved Loading Dump File C Windows Minidump - - dmp Mini Kernel Dump File Only registers and stack trace are available Symbol Path validation summary Response Time ms Location Deferred SRV C SymCache http msdl microsoft com download symbols Symbol search path is SRV C SymCache http msdl microsoft com download symbols Executable search path is Windows Kernel Version Service Pack MP procs Free x Product WinNt suite TerminalServer SingleUserTS Built by amd fre win sp gdr - Machine Name Kernel base xfffff PsLoadedModuleList xfffff a Debug session time Fri Jul UTC - System Uptime days Loading Kernel Symbols Loading User Symbols Loading unloaded Random BSOD "ntkrnlmp.exe ( nt!KiSwapContext+ba )" module list Bugcheck Analysis Use analyze -v to get detailed debugging information BugCheck A c a fffff ca ea Probably caused by ntkrnlmp exe nt KiSwapContext ba Followup MachineOwner --------- kd gt analyze -v Bugcheck Analysis IRQL NOT LESS OR EQUAL a An attempt was made to access a pageable or completely invalid address at an interrupt request level IRQL that is too high This is usually caused by drivers using improper addresses If a kernel debugger is available get the stack backtrace Arguments Arg c a memory referenced Arg IRQL Arg bitfield bit value read operation write operation bit value not an execute operation execute operation only on chips which support this level of status Arg fffff ca ea address which referenced memory Debugging Details ------------------ READ ADDRESS GetPointerFromAddress unable to read from fffff GetUlongFromAddress unable to read from fffff c c a Nonpaged pool CURRENT IRQL FAULTING IP nt KiSwapContext ba fffff ca ea b mov rdi qword ptr rcx CUSTOMER CRASH COUNT DEFAULT BUCKET ID WIN DRIVER FAULT BUGCHECK STR xA PROCESS NAME FoxitReader ex ANALYSIS VERSION debuggers dbg - amd fre TRAP FRAME fffff d f -- trap xfffff d f NOTE The trap frame does not contain all registers Some register values may be zeroed or incorrect rax ef c rbx rcx c rdx rsi rdi rip fffff ca ea rsp fffff d f rbp fffffa e r fffffa fb r r ffffffffffffffbf r fffffa c c r r r r iopl nv up ei ng nz na pe nc nt KiSwapContext xba fffff ca ea b mov rdi qword ptr rcx ds c a Resetting default scope LAST CONTROL TRANSFER from fffff c e to fffff c c STACK TEXT fffff d f fffff c e a c a nt KeBugCheckEx fffff d f fffff c ae fffff fb fffffa c fffff fffff fb nt KiBugCheckDispatch x fffff d f fffff ca ea ffffffff ffffffbf fffff c nt KiPageFault x fffff d f fffff cb fffffa e fffffa e fffffa nt KiSwapContext xba fffff d f fffff cf f c f f e nt KiCommitThreadWait x d fffff d f d fffff bc e fffffa fffff d f a nt KeWaitForSingleObject x f fffff d f a fffff c b fffffa e c fffff d f ab fffffa b c nt NtWaitForSingleObject xde fffff d f ae b e nt KiSystemServiceCopyEnd x cc f x b e STACK COMMAND kb FOLLOWUP IP nt KiSwapContext ba fffff ca ea b mov rdi qword ptr rcx SYMBOL STACK INDEX SYMBOL NAME nt KiSwapContext ba FOLLOWUP NAME MachineOwner MODULE NAME nt IMAGE NAME ntkrnlmp exe DEBUG FLR IMAGE TIMESTAMP e IMAGE VERSION FAILURE BUCKET ID X xA nt KiSwapContext ba BUCKET ID X xA nt KiSwapContext ba ANALYSIS SOURCE KM FAILURE ID HASH STRING km x xa nt kiswapcontext ba FAILURE ID HASH d a c- - - - b fc d bf Followup MachineOwner ---------

A:Random BSOD "ntkrnlmp.exe ( nt!KiSwapContext+ba )"

Ok I ran SFC and it didn't find any errors. Below are the other dumps if that helps. There have been other BSOD, but they haven't created any dumps.

Also, I only use MSE and Malwarebytes. Both came up clean.


Code:
Microsoft (R) Windows Debugger Version 6.3.9600.17336 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Windows\Minidump\070715-7160-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available


************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.18869.amd64fre.win7sp1_gdr.150525-0603
Machine Name:
Kernel base = 0xfffff800`03665000 PsLoadedModuleList = 0xfffff800`038ac730
Debug session time: Tue Jul 7 08:09:56.920 2015 (UTC - 5:00)
System Uptime: 9 days 21:12:01.732
Loading Kernel Symbols
...............................................................
................................................................
...............................................
Loading User Symbols
Loading unloaded module list
........................................
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 3B, {c0000005, fffff800039f0f20, fffff880221d9d50, 0}

Probably caused by : ntkrnlmp.exe ( nt!ObDereferenceSecurityDescriptor+20 )

Followup: MachineOwner
---------

7: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff800039f0f20, Address of the instruction which caused the bugcheck
Arg3: fffff880221d9d50, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.

Debugging Details:
------------------


EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

FAULTING_IP:
nt!ObDereferenceSecurityDescriptor+20
fffff800`039f0f20 8b4610 mov eax,dword ptr [rsi+10h]

CONTEXT: fffff880221d9d50 -- (.cxr 0xfffff880221d9d50;r)
rax=fffff880221da758 rbx=0000000000000000 rcx=fffdf8a003347190
rdx=000000000000000d rsi=fffdf8a003347170 rdi=0000000000000000
rip=fffff800039f0f20 rsp=fffff880221da730 rbp=fffffa800f3191f0
r8=0000000000000000 r9=0000000000000000 r10=0000000000000000
r11=fffff880221da808 r12=000000000000000d r13=fffffa800f0f5870
r14=0000000000000000 r15=fffff8a02842b120
iopl=0 nv up ei ng nz na po nc
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010286
nt!ObDereferenceSecurityDescriptor+0x20:
fffff800`039f0f20 8b4610 mov eax,dword ptr [rsi+10h] ds:002b:fffdf8a0`03347180=????????
Last set context:
rax=fffff880221da758 rbx=0000000000000000 rcx=fffdf8a... Read more

http://www.sevenforums.com/bsod-help-support/375837-random-bsod-ntkrnlmp-exe-nt-kiswapcontext-ba.html
Relevancy 80.84%

Hello,

For Christmas yesterday I got a brand new Windows 7 laptop (Toshiba Satellite) and ever since I have started using it I've been getting the BSOD saying, "driver_irql_not_less_or_equal" It happens at random times, mostly browsing the internet/starting up. I have done virus/malware checks using Security Essintals and Malwarebytes, and nothing popped up, so I don't think it's a virus. Please help

A:BSOD "driver_irql_not_less_or_equal" at random times.

You need to update this driver - it's not that old.

AtiPcie.sys Wed May 06 03:00:22 2009
Program/Hardware - ???

Can you please fill in your system specs?

http://www.sevenforums.com/bsod-help-support/133524-bsod-driver_irql_not_less_or_equal-random-times.html
Relevancy 80.84%

Hi!

I?ve been searching alot on the web to solve my bsod problem. Although I?ve been trying all kinds of tips. My computer stil continues to get random bsod. I was hoping that you guys could help me and find a solution to all these problems.

A:Random bsod when my computer is "thinking"

Hi Shinzu.

The BSODs are pointing something to the file system/storage.

Code:
BugCheck 1E, {ffffffffc0000005, fffff88001084039, 0, ffffffffffffffff}

Probably caused by : fileinfo.sys ( fileinfo!FIStreamGet+52 )

Followup: MachineOwner
---------------------------------------------------------------
BugCheck 24, {c08a5, 0, 0, 0}

Probably caused by : Ntfs.sys ( Ntfs!NtfsPagingFileIo+155 )

Followup: MachineOwner
---------
Multiple Antivirus programs are not healthy to use at the same time. As you have Microsoft Security Essentials installed, uninstall Avast using Avast Uninstall Utility. Their file system monitoring drivers may conflict and cause this BSOD.

Make it sure that the SSD is running with the latest firmware.
Download V300_525fw_Win, for SV300S3 | Kingston Technology

Post screenshots of all the SSDs and HDDs using CrystalDiskInfo - Software - Crystal Dew World.

http://www.sevenforums.com/bsod-help-support/323156-random-bsod-when-my-computer-thinking.html
Relevancy 80.84%

So I randomly get a BSOD, sometimes while sitting idle, other times just running firefox. Used to happen frequently trying to run SolidWorks and was a Nvidia graphics issue I though- Reformatted machine with new ATI card and now have this problem. Hopefully someone can decipher the below information as I'm not sure if it's a hardware, ie memory, or driver issue. Also attached is the dump. This is my first post, so let me know if I'm posting this in the wrong way or need any other info. Thanks in advance!

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: fc
BCP1: FFFFF8800B6C58BB
BCP2: 800000009A2E4963
BCP3: FFFFF8800B6C5560
BCP4: 0000000000000002
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

A:BSOD random "Probably caused by : ntkrnlmp.exe"

Welcome to SevenForums

From your most recent .dmp and bugcheck it points toward a device driver.

Starting with problematic software first:
I do not see any antivirus listed on your .nfo file, but see something from "symantec" in there.

Code:
Start Menu\Programs\Symantec Endpoint Protection Public:Start Menu\Programs\Symantec Endpoint Protection Public
The antivirus you are currently using is known to and contributing to your BSOD crashes, consider uninstalling it with the Norton Removal Tool and replace with Microsoft Security Essentials at least to test.Norton Removal Tool
Recommended antivirus program for Windows 7 based on stability compared to others:- Microsoft Security Essentials - Free Antivirus for Windows
Microsoft Security Essentials Download | Free Spyware Protection
Malwarebytes - The Free version
Good and Free system security combination.
Do not start the free trial of Malware Bytes; remember to deselect that option when prompted.

Run a full scan with both (separately) once downloaded, installed and updated.

Run the System File Checker that scans the of all protected Windows 7 system files and replaces incorrect corrupted, changed/modified, or damaged versions with the correct versions if possible:SFC /SCANNOW Command - System File Checker
Run Disk Check on your hard disk for file system errors and bad sectors on it:Disk Check
Free up the start-up, nothing except the antivirus is usually needed.Startup Programs - Change
Troubleshoot Application Conflicts by Performing a Clean Startup
Let us know the results.

http://www.sevenforums.com/bsod-help-support/262347-bsod-random-probably-caused-ntkrnlmp-exe.html
Relevancy 80.84%

I've been getting some rather frequent bluescreens (happens about once every 1-2 days), and very frequent chrome tab crashes.

A:Random freezes and BSOD as well as "He's dead Jim"

Hi Kurahk7 & Welcome to the forums ^_^,

I have analyzed your dump files and below has been provided an analysis of the same for informative purposes :-


Code:
WHEA_UNCORRECTABLE_ERROR (124)A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: ffffe00043a89028, Address of the WHEA_ERROR_RECORD structure.
Arg3: 00000000f2000000, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000000010005, Low order 32-bits of the MCi_STATUS value.

0: kd> !errrec ffffe00043a89028
===============================================================================
Common Platform Error Record @ ffffe00043a89028
-------------------------------------------------------------------------------
Record Id : 01cfcd2b57c3223d
Severity : Fatal (1)
Length : 864
Creator : Microsoft
Notify Type : Machine Check Exception
Timestamp : 9/11/2014 5:31:33 (UTC)
Flags : 0x00000000
===============================================================================
Section 0 : Processor Generic
-------------------------------------------------------------------------------
Descriptor @ ffffe00043a890a8
Section @ ffffe00043a89180
Offset : 344
Length : 192
Flags : 0x00000001 Primary
Severity : Fatal
Proc. Type : x86/x64
Instr. Set : x64
Error Type : Micro-Architectural Error
Flags : 0x00
CPU Version : 0x00000000000106e5
Processor ID : 0x0000000000000000
===============================================================================
Section 1 : x86/x64 Processor Specific
-------------------------------------------------------------------------------
Descriptor @ ffffe00043a890f0
Section @ ffffe00043a89240
Offset : 536
Length : 64
Flags : 0x00000000
Severity : Fatal
Local APIC Id : 0x0000000000000000
CPU Id : e5 06 01 00 00 08 10 00 - fd e3 98 00 ff fb eb bf
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00
===============================================================================
Section 2 : x86/x64 MCA
-------------------------------------------------------------------------------
Descriptor @ ffffe00043a89138
Section @ ffffe00043a89280
Offset : 600
Length : 264
Flags : 0x00000000
Severity : Fatal
Error : Unknown (Proc 0 Bank 2)
Status : 0xf200000000010005


Well that is weird. According to the Dump file, there was an UNKNOWN error in the Processor 0 Bank 2. Below is a list of the 3rd party drivers present on the system :-

Code:
**************************Thu Sep 11 11:01:33.988 2014 (UTC + 5:30)**************************
WinRing0x64.sys Sat Jul 26 18:59:37 2008 (488B26C1)
cmudaxp.sys Mon Jul 22 06:54:04 2013 (51EC89B4)
iaStorA.sys Fri Aug 2 07:09:52 2013 (51FB0DE8)
dump_iaStorA.sys Fri Aug 2 07:09:52 2013 (51FB0DE8)
intelppm.sys Thu Aug 22 14:16:35 2013 (5215CFEB)
AMDACPKSL.SYS Wed Mar 12 05:19:44 2014 (531FA118)
AtihdWB6.sys Wed Mar 12 05:20:02 2014 (531FA12A)
LHidEqd.Sys Wed Mar 19 05:50:53 2014 (5328E2E5)
LEqdUsb.Sys Wed Mar 19 05:50:55 2014 (5328E2E7)
LHidFilt.Sys Wed Mar 19 05:51:03 2014 (5328E2EF)
LMouFilt.Sys Wed Mar 19 05:51:03 2014 (5328E2EF)
Rt630x64.sys Tue Jun 17 17:26:46 2014 (53A02CFE)
nldrv.sys Wed Jul 9 14:04:37 2014 (53BCFE9D)
atikmpag.sys Tue Aug 12 07:03:58 2014 (53E96F06)
atikmdag.sys Tue Aug 12 08:07:53 2014 (53E97E01)


http://www.carrona.org/drivers/driver.php?id=WinRing0x64.sys
http://www.carr... Read more

http://www.eightforums.com/bsod-crashes-debugging/53606-random-freezes-bsod-well-hes-dead-jim.html
Relevancy 80.84%

Hey everyone,

Got some trouble with random BSODs. I recently removed my SSD that was faulty and made a fresh Win7 install on my other hard drive (a regular one). My PC now has random BSODs and I'm at a loss at what could be causing it as I'm somewhat computer savvy but not nearly as savvy as you guys.

I uploaded the results of the diagnostic tool in attachment.

Any help would be greatly appreciated.
If you need more info let me know!

Thanks

Chupacabra

A:BSOD at random intervals "Driver_IRQL_NOT_LESS_OR_EQUAL"

Hi there, Welcome to SevenForums.com.

IRQL_NOT_LESS_OR_EQUALIs to do with ram.

Please try running memtest on your system Click the link for instructions: RAM - Test with Memtest86+

Let us know how you get on,

http://www.sevenforums.com/bsod-help-support/272034-bsod-random-intervals-driver_irql_not_less_or_equal.html
Relevancy 80.84%

I built my PC with 8gb of RAM and recently decided to add a matching third stick of RAM for 12gb total. Since then, I've been getting a BSOD at random times. I play Battlefield 4 a lot and it's never happened during a game, but it would seem to happen while I was away from the computer sometime AFTER I had played for awhile. Now it's finally happened a few times while I'm on the computer, once while streaming a video on CBS' website, another time just browsing the web. I've run Memtest86 a few times and found no errors, but I feel like this is somehow related to the third stick of RAM. Can anyone help?

A:Random BSOD "system_process_exception" after installing new RAM

Your nVidia driver is causing issues.


Code:
fffff880`0926e7b8 fffff880`0f2c274eUnable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
nvlddmkm+0x21274e
Download an earlier version from here and follow NVIDIA Drivers - Avoid Problems for the cleanest possible install.

http://www.sevenforums.com/bsod-help-support/334813-random-bsod-system_process_exception-after-installing-new-ram.html
Relevancy 80.84%

I have been getting "ntoskrnl.exe" driver problem for the last few days. I have tried reinstalling my drivers and I even did a system restore but still remains...

Here are dmp files in the zips.
I can also provide other related files if needed.

Thanks,

Tim

A:"ntoskrnl.exe" BSOD - Random moments

Disk or RAM is bad most likely ... make sure everything is seated well.

http://www.sevenforums.com/bsod-help-support/209652-ntoskrnl-exe-bsod-random-moments.html
Relevancy 80.84%

I am running Windows XP SP fully updated on an Acer Explorer Column Windows no "Minutes" "Seconds", "Hours" just "Duration" - and lap top PC I have several folders full of mp 's and want to Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes" see the bit rate and Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes" duration To Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes" do this I right click on a column heading and select quot Bit rate quot I then click on quot More quot so I can get to quot Duration quot and I select that one too The two new columns appear but the format of the quot Duration quot column appears to be quot hours minutes quot so I see quot quot or quot quot for most mp 's when what I want to see is 'hours minutes seconds quot e g quot quot This also happens for video files avi files e g all my episodes of quot Heroes quot sad I know have a duration of quot quot instead of quot xx quot Here are two pictures showing the problem with the mp 's The first is of Explorer showing the Duration as quot Hours Minutes quot The second picture is of the properties window of the first mp in the list above I copied some mp files to another old PC on my home network and it displayed the duration field correctly Also the properties window correctly shows the duration also I'm not the only person to have this problem I received a private message from a member of another forum where I posted about this problem several weeks ago That person also has the same problem with the duration field The tech guys on that forum were unable to find the source of the duration field problem But after I had such a great success on this forum with my hard disk problem here I decided to try to get help here Thanks in advance for any suggestions

A:Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes"

* bump *

Tricky, this one!

http://www.techsupportforum.com/forums/f10/windows-explorer-duration-column-no-seconds-just-hours-and-minutes-253928.html
Relevancy 80.41%

Im always getting this BSOD error. Please help me identify the driver that is causing it.
Minidumps attached.
Thanks.

A:special pool detected memory corrupt BSOD

  
Quote: Originally Posted by ceril


Im always getting this BSOD error. Please help me identify the driver that is causing it.
Minidumps attached.
Thanks.


These crashes were caused by memory corruption (probably a driver). Please run these two tests to verify your memory and find which driver is causing the problem.

If you are overclocking anything reset to default before running these tests.
In other words STOP!!!
1-Memtest.





Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.



RAM - Test with Memtest86+

2-Driver verifier






Quote:
I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.


Driver Verifier - Enable and Disable
Further Reading
Using Driver Verifier to identify issues with Windows drivers for advanced users

http://www.sevenforums.com/bsod-help-support/205159-special-pool-detected-memory-corrupt-bsod.html