Windows Support Forum

BSOD in ntoskrnl.exe+7f1c0 on new Laptop Win 7 64 bit

Q: BSOD in ntoskrnl.exe+7f1c0 on new Laptop Win 7 64 bit

Hello,

I'm having blue screen errors on my Laptop which is only a couple weeks old and otherwise running fine. The BSODs aren't that many, maybe once a week while using the computer daily. Once it apparently was caused by me plugging in my USB mouse. Already did a memtest and chkdsk without result. Diagnostic tool files are attached. Any help is greatly appreciated!

Relevancy 100%
Preferred Solution: BSOD in ntoskrnl.exe+7f1c0 on new Laptop Win 7 64 bit

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: BSOD in ntoskrnl.exe+7f1c0 on new Laptop Win 7 64 bit

Hello,

It looks like the first two BSODs were caused by old Razer mouse drivers. Install updated ones from here: Razer Support


Code:
copperhd.sys Tue Nov 10 02:50:17 2009 (4AF91B39)
The last one may have been caused by hardware. Try running the three Prime95 tests: Hardware - Stress Test With Prime95

...Summary of the dumps:

Code:

Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
Debug session time: Sun Aug 5 05:57:28.338 2012 (UTC - 4:00)
System Uptime: 0 days 0:01:04.368
*** WARNING: Unable to verify timestamp for copperhd.sys
*** ERROR: Module load completed but symbols could not be loaded for copperhd.sys
Probably caused by : copperhd.sys ( copperhd+16c9 )
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
BUGCHECK_STR: 0x50
PROCESS_NAME: razerhid.exe
FAILURE_BUCKET_ID: X64_0x50_copperhd+16c9
BiosReleaseDate = 04/20/2012
SystemProductName = Aspire V3-571G
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
Debug session time: Thu Jul 26 15:20:29.268 2012 (UTC - 4:00)
System Uptime: 0 days 0:01:24.298
*** WARNING: Unable to verify timestamp for copperhd.sys
*** ERROR: Module load completed but symbols could not be loaded for copperhd.sys
Probably caused by : copperhd.sys ( copperhd+16c9 )
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
BUGCHECK_STR: 0x50
PROCESS_NAME: razerhid.exe
FAILURE_BUCKET_ID: X64_0x50_copperhd+16c9
BiosReleaseDate = 04/20/2012
SystemProductName = Aspire V3-571G
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
Debug session time: Mon Jul 23 17:07:06.194 2012 (UTC - 4:00)
System Uptime: 0 days 11:18:47.226
*** ERROR: Module load completed but symbols could not be loaded for Ntfs.sys
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : ntkrnlmp.exe ( nt!FsRtlTeardownPerStreamContexts+e2 )
BUGCHECK_STR: 0xc2_7
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0xc2_7_nt!FsRtlTeardownPerStreamContexts+e2
BiosReleaseDate = 04/20/2012
SystemProductName = Aspire V3-571G
??????????????????????????????????????????????????????????????????????????????????????``

http://www.sevenforums.com/bsod-help-support/244838-bsod-ntoskrnl-exe-7f1c0-new-laptop-win-7-64-bit.html
Relevancy 103.2%

Hello i recently got a new HP Pavillion dv - c us about a week ago Code caused by ntoskrnl.exe+7f1c0? laptop, BSOD new Intel Core i - M GB DDR RAM x GB x GB GB RPM Hard Drive - x -bit new laptop, BSOD caused by ntoskrnl.exe+7f1c0? or x - Windows Home Premium bit - the original installed OS on the system - Yes - an OEM or full retail version - OEM - What is the age of system hardware NEW - What is the age of OS installation have you re-installed the OS NEW Today i received a BSOD while new laptop, BSOD caused by ntoskrnl.exe+7f1c0? listening to turntable fm For those who dont know what turntable fm is its like pandora but theres DJ's that take turns new laptop, BSOD caused by ntoskrnl.exe+7f1c0? playing music i have no idea how that can give me a BSOD Having only gotten this laptop a week ago i was terrifed So i restarted my computer and restored to a previous point and everything seemed normal until i noticed my physical memory was at when i had nothing open usually it is at Windows and BIOS is reading the laptop only having GBs of RAM when it has really GBs So i reinsert the GB ram stick and everything is back to normal Hours later i was listening to turntable fm again and i was able to recreate the same BSOD im guessing the gb ram stick is going bad idk Heres a BSODScreen viewer dump Code Dump File - - dmp Crash Time AM Bug Check String KMODE EXCEPTION NOT HANDLED Bug Check Code x e Parameter ffffffff c Parameter Parameter Parameter Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe f c File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win sp gdr - Processor x Crash Address ntoskrnl exe f c Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size edit i also ran a memtest and both rams seems to pass should i do - passes i decided to experment and found that if i switch around the ramsticks in the slots i found when i put the gb ramstick into the gb original ramslot the computer would now sometimes read gbs of ram instead of sometimes reading gb of ram from earlier so im guessing the ramslot where the gb ramstick originally sat is faulty or i could be wrong idk

A:new laptop, BSOD caused by ntoskrnl.exe+7f1c0?

Please follow the http://www.sevenforums.com/crashes-d...tructions.html so we can help you.

Stephen

http://www.sevenforums.com/bsod-help-support/234089-new-laptop-bsod-caused-ntoskrnl-exe-7f1c0.html
Relevancy 89.87%

I have been getting a BSOD in my fresh Windows install, I'm running Windows 7 Pro x64 (MSDNAA).

I had done a clean install after I got a couple of BSOD f4 but now I'm still getting the same BSOD! I've already collected some dump with and without running Driver Verifier.

Before clean install I updated my BIOS, I updated SSD firmware and I runned a memtest: my ram passed the test.

sfc /scannow report: "Windows Resource Protection did not find any integrity violations."

When I runned Windows_NT6_BSOD_v3.03_jcgriff2_.exe I got a BSOD because of HIDCLASS.SYS

Hopefully i can get some help here

PS: sorry for my poor English

A:BSOD f4, ntoskrnl.exe-7f1c0

Problem Devices:
Code:
ehdrv ROOT\LEGACY_EHDRV\0000 This device is not present, is not working properly, or does not have all its drivers installed.
epfwwfp ROOT\LEGACY_EPFWWFP\0000 This device is not present, is not working properly, or does not have all its drivers installed.
Network Controller PCI\VEN_168C&DEV_0023&SUBSYS_3071168C&REV_01\5&D93DF5B&0&0800E6 The drivers for this device are not installed.
Security Processor Loader Driver ROOT\LEGACY_SPLDR\0000 This device is not present, is not working properly, or does not have all its drivers installed.
Was the crash report jcgriff2 executable run in Safe Mode? Make sure the above drivers get installed to provide system stability. If you need help with the drivers, fill in your system specs in your profile and not in a post in this thread: System Info - See Your System Specs
What kind of memtest did you run? How many passes?

Your crashes primarily indicate hard disk problems. This could mean hard disk corruption, bad sectors, a failing hard disk, Windows files or registry corruption, viruses, or memory problems.If you are overclocking any hardware, please stop.

Run Disk Check with both boxes checked for all HDDs and with Automatically fix file system errors checked for all SSDs. Post back your logs for the checks after finding them using Check Disk (chkdsk) - Read Event Viewer Log (you may need to search for wininit instead of chkdsk).
For any drives that do not give the message:
Windows has checked the file system and found no problems
run disk check again as above. In other words, if it says:
Windows has made corrections to the file system
after running the disk check, run the disk check again.

Run the short and long tests with SeaTools for HDDs.SeaTools for Windows

SeaTools for DOS
If you have an SSD, make sure the following are up to date:SSD firmware
BIOS Version
Chipset Drivers
Hard disk controller drivers/SATA drivers
If you have a Marvell IDE ATA/ATAPI device, uninstall it in device manager and see if the system performs better.

Download and install Malwarebytes, update it, do not start the free trial, and then run a full scan. Also run a full scan with your antivirus software installed on your system. If you do not have antivirus software installed, see the Good and Free system security combination. for better security steps and scanning tools. Make sure to update the security software before running the full scan.

Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).


   Warning
Before you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. WARNING: The steps that follow can void your warranty!!!

For Part 3: If You Have Errors: If you swap any memory components, follow these steps for ESD safety:Shut down and turn off your computer.
Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working. If you do not have an anti-static workbench, desk, or pad, you can use your computer tower/case by fi... Read more

http://www.sevenforums.com/bsod-help-support/232749-bsod-f4-ntoskrnl-exe-7f1c0.html
Relevancy 88.58%

My wife's Sony Vaio (VPCEE41FD) laptop has been acting up over the last few nights.
It would hang up on shutting down, taking sometimes over an hour+

Just tonight it decided to BSOD stating driver_power_state_failure ntoskrnl.exe+7f1c0
If I recall, I think this happened about a month ago as well.
Nothing was being done at the time of the BSOD and I have it set to not hibernate or sleep, just power off the display.

Any suggestions or help are greatly appreciated. Thank you in advance.
Attached is the requested/required diagnostic logs from the SF Diag Tool.

A:bsod driver_power_state_failure ntoskrnl.exe+7f1c0

Welcome aboard, Risk.

► I suggest you to uninstall Avast, right now. It is must in your situation.
Use Microsoft Security Essentials - Free Antivirus for Windows, with Windows firewall.
Avast firewall is causing a huge lot of troubles there.

► And, update your Atheros network adapter driver, from ATHEROS drivers for Microsoft Windows (Atheros?????).

Code:
0: kd> lmvm athrx
start end module name
fffff880`04426000 fffff880`045a5000 athrx T (no symbols)
Loaded symbol image file: athrx.sys
Image path: \SystemRoot\system32\DRIVERS\athrx.sys
Image name: athrx.sys
Timestamp: Sat Nov 07 02:26:02 2009 (4AF48D62)
CheckSum: 00185986
ImageSize: 0017F000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
You can see that the driver installed is very old.

► ATI Video Driver is causing equal troubles.

Code:
kd> lmvm atikmpag
start end module name
fffff880`04185000 fffff880`041b9000 atikmpag T (no symbols)
Loaded symbol image file: atikmpag.sys
Image path: \SystemRoot\system32\DRIVERS\atikmpag.sys
Image name: atikmpag.sys
Timestamp: Tue Jul 13 15:21:00 2010 (4C3C3704)
CheckSum: 00030E73
ImageSize: 00034000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
It is also very old and needs an update. Get it from AMD Support & Drivers.

► Auslogics is not a good example of a program. I recommend Puran Defrag.

Let us know the situation.

http://www.sevenforums.com/bsod-help-support/254023-bsod-driver_power_state_failure-ntoskrnl-exe-7f1c0.html
Relevancy 88.58%

My computer working always good most bsod coming without reason on a day i seeing not reason for this pc have not many load ram test with memtest working over houres without problems here bsod logs anybody have without 7f1c0 BSOD reason? ntoskrnl.exe idea sorry for my bad english this crash coming on a burnintest Code Dump File - - dmp Crash Time Bug Check String PAGE FAULT IN NONPAGED AREA Bug Check Code x Parameter fffffd c c c Parameter Parameter fffff a Parameter Caused By Driver win k sys Caused By Address win k BSOD without reason? ntoskrnl.exe 7f1c0 sys b File Description Product Name Company File Version Processor x Crash Address ntoskrnl exe f c Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size thois coming without load Code Dump File - - dmp Crash Time Bug Check String PAGE FAULT IN NONPAGED AREA Bug Check Code x Parameter fffffaa b Parameter Parameter fffff f Parameter Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe f c File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win sp gdr - Processor x Crash Address ntoskrnl exe f c Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time Bug Check String PAGE FAULT IN NONPAGED AREA Bug Check Code x Parameter fffffa c c c b Parameter Parameter fffff d f Parameter Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe f c File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win sp gdr - Processor x Crash Address ntoskrnl exe f c Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time Bug Check String PAGE FAULT IN NONPAGED AREA Bug Check Code x Parameter fffffa c ee b Parameter Parameter fffff c d f Parameter Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe f c File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win sp gdr - Processor x Crash Address ntoskrnl exe f c Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time Bug Check String PAGE FAULT IN NONPAGED AREA Bug Check Code x Parameter fffffa c feb Parameter Parameter fffff b e Parameter Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe f c File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win sp gdr - Processor x Crash Address ntoskrnl exe f c Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size thanks

A:BSOD without reason? ntoskrnl.exe 7f1c0

Hello Halloworld and welcome to Sevenforums.

To be able to help you, we'd need you to attach some files in order for us to analyse your crash. The below link will guide you through some steps for catching these files. If you have any questions just ask us.

http://www.sevenforums.com/crashes-d...tructions.html

Best Regards,
Frederik.

http://www.sevenforums.com/bsod-help-support/243648-bsod-without-reason-ntoskrnl-exe-7f1c0.html
Relevancy 88.58%

I have been getting a BSOD in my newly installed system

and ive included the files in this post as you asked for before posting

I am running Win 7 x64 OEM i bought it together with the parts for my system which you can see in my signature. it is only nearly 4 weeks old, i did put the system together myself for the first time .

hopefully i can get some help here

Btw the OS is installed on my Corsair SSD.

A:BSOD ntoskrnl.exe-7f1c0 while idling

And i runned a memtest today also and My ram Passed The test

http://www.sevenforums.com/bsod-help-support/228812-bsod-ntoskrnl-exe-7f1c0-while-idling.html
Relevancy 87.72%

I have had a new system built, Had it for almost 2 weeks and been getting the BSOD at least 2x a day. Ihave been browsing the web and had it happen, been playing online games and have it happen. Have even come home after work to find that the computer crashed and had to be restarted because of it. Dont know what to do. Can you help me?
Thank you in advance.

A:BSOD : Caused by address : ntoskrnl.exe+7f1c0

Hello,






Quote:
Start Menu\Programs\Advanced SystemCare with Antivirus 2013 Public:Start Menu\Programs\Advanced SystemCare with Antivirus 2013 Public


This program, Advanced SystemCare, is known to cause problems with windows. It modifies the registry, and could cause even more errors. Please uninstall. Since this comes with an anti-virus, i suggest using Microsoft Security Essentials - Free Antivirus for Windows in place.


Code:
Start Menu\Programs\DAEMON Tools Lite Public:Start Menu\Programs\DAEMON Tools Lite Public
Daemon Tools are also know to cause problems with windows. Please uninstall also.






Quote:
Probably caused by : memory_corruption


This shows memory corruption, so try running a RAM - Test with Memtest86+ to make sure the RAM isn't bad.


Code:
ctac32k.sys Wed Jul 2 03:38:22 2008 (486B3E7E)
Drivers before 2009 are known to cause problems aswell. Please update: Creative Worldwide Support

After all is done please post back results.

-Justin

http://www.sevenforums.com/bsod-help-support/243938-bsod-caused-address-ntoskrnl-exe-7f1c0.html
Relevancy 87.72%

Hi All

I built a custom machine a month ago and been receiving very strange BSODs all with the same message for the last month.

All drivers are upto date including the SSD as primary and the BIOS

What happens is intermittent and my machine freezes for a few seconds then eventually starts BSOD and memory dumping.

I have done a full memtest, hdd check, gfx card stress test etc. All is good.

Theres even times I can be going for 12 hours straight without issues so Im not able to reproduce it unfortunately.

Attached are the diag tools outputs

Any help of course is greatly appreciated

Thx

Maroof

A:BSOD ntoskrnl.exe+7f1c0 CRITICAL_OBJECT_TERMINATION randomly

Hardware
I see you have an SSD installed. SSD drivers are a common cause of BSOD's, in particular Crucial M4's with outdated firmware. Make sure that the following is up to date:








  
Quote: Originally Posted by writhziden


SSD Firmware
BIOS Version
Chipset Drivers
Hard disk controller drivers/SATA drivers
Marvell IDE ATA/ATAPI controllers (older drivers for these are especially problematic)



Software
Run a full system scan with Malwarebytes.
Malwarebytes : Free anti-malware download

http://www.sevenforums.com/bsod-help-support/244611-bsod-ntoskrnl-exe-7f1c0-critical_object_termination-randomly.html
Relevancy 87.72%

Hello recently I have just built my new computer and everything seemed to playing BSOD computer, while ntoskrnl.exe+7f1c0 using be going fine However I had gotten a BSOD when trying to copy a large amount of file from my external Although I BSOD while playing using computer, ntoskrnl.exe+7f1c0 didn't get the dump file of it as that wasn't BSOD while playing using computer, ntoskrnl.exe+7f1c0 in the settings at the time I assumed it was due to copying from the external and just copied smaller files and it hasn't happened again However I was just playing League of Legends and my computer decided to randomly BSOD So I downloaded SF Diagnostic Tool and zipped the folder so I was wondering as what the problem is BlueScreenView says the crash address is ntoskrnl exe f c and I wasn't sure if this was a hardware or BSOD while playing using computer, ntoskrnl.exe+7f1c0 software problem as I have only received the parts less than a week ago My specs are Gigabyte Z -D H motherboard Intel Core i - processor gig of Corsair Vengeance RAM GeForce GTX graphics card Any help would be greatly appreciated

A:BSOD while playing using computer, ntoskrnl.exe+7f1c0

Welcome aboard, Balvedius

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 50, {fffff6a000022640, 0, fffff80002eb4b2b, 5}
Could not read faulting driver name
Probably caused by : memory_corruption ( nt!MiAgeWorkingSet+1d1 )
At first, you are to run RAM - Test with Memtest86+ . run it for 8 passes.

As the crash is hardware related, you are suggested to take two more testsHardware - Stress Test With Prime95, and
run chkdsk/F/R, using the method two of the tutorial Disk Check.

Let us know the results.

http://www.sevenforums.com/bsod-help-support/250256-bsod-while-playing-using-computer-ntoskrnl-exe-7f1c0.html
Relevancy 87.72%

Computer keeps BSOD after trying to wake it from sleep mode, or even if the monitor just powers off via power save options. Installed latest video drivers and windows updates to no avail. Thanks in advance for the help!

A:BSOD after sleep mode ntoskrnl.exe+7f1c0

hi
The last dump refers to msahci.sys... which is related to you Hard Dirve..

Check you bios to see if it is set to AHCI ...

http://www.sevenforums.com/bsod-help-support/244004-bsod-after-sleep-mode-ntoskrnl-exe-7f1c0.html
Relevancy 87.72%

I built a new PC back in June and have been receiving numerous BSOD's and have just been working through it until now, can you help me with it? I have attached the dump files as outlined in the SF Diagnostic Tool. I have the following:

asrock z77 extreme6 board
Curcial M4 SSD
Kingston 8GB 1600 CL9 (not the issue as I get the same BSOD when using GSkill RipJaws
Intel I5-3570K

I have checked through the mini dumps numerous times but cannot figure it out. Any help would be great.

A:BSOD ntoskrnl.exe+7f1c0 Vista Driver

I didn't mean to put sfc /scannow in subject line. Let me know if I didn't post correctly and I can repost... please help someone

http://www.sevenforums.com/bsod-help-support/250445-bsod-ntoskrnl-exe-7f1c0-vista-driver.html
Relevancy 87.72%

I'm decent with computers, but I've definitely managed to end up a bit over my head with this one. I've got 4 different BSODs due to this one file now, all at seemingly random times. One while running Guild Wars 2, several while trying to run HULU via Chrome, and one while moving Chrome from one screen to the other. I even managed to get one in Safe Mode and one while trying to load into Safe Mode. Even got one while checking the C Drive for errors. I have never in my life seen a BSOD outside of Windows, so I know something is definitely wrong. I figured I'd come in here and ask what you guys think instead of tinkering around with stuff and possibly making it worse.

A:BSOD Caused By Driver ntoskrnl.exe (+7f1c0)

Welcome

What antivirus are you using? I cannot see any listed.

Problematic software:

Code:
Start Menu\Programs\DAEMON Tools Lite Public:Start Menu\Programs\DAEMON Tools Lite Public
Please uninstall Daemon Tools, it's known to cause BSODs. Search our forum for evidence.


Code:
STOP 0x0000003B: SYSTEM_SERVICE_EXCEPTION
Usual causes: System service, Device driver, graphics driver, ?memory
BugCheck 3B, {c000001d, fffffa8010e0d060, fffff880045c2ad0, 0}
Probably caused by : ntkrnlmp.exe ( nt!KiSystemServiceHandler+7c )
.................................
fffff880`045c25a0 fffff880`0f507ad1Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
nvlddmkm+0xd9ad1
.................................
2: kd> lmvm nvlddmkm
start end module name
fffff880`0f42e000 fffff880`101f0000 nvlddmkm T (no symbols)
Loaded symbol image file: nvlddmkm.sys
Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
Image name: nvlddmkm.sys
Timestamp: Tue May 15 13:35:36 2012 (4FB20748)
CheckSum: 00DA5E91
ImageSize: 00DC2000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Please update your graphic card drivers to their latest.
Click on the Start ► Control Panel ► Programs ► Uninstall a program ► Uninstall the NVIDIA related stuff and use Driver Sweeper to remove any remaining drivers of NVIDIA. Get the latest version installed from the manufacturers website.

4 of your dumps indicate problems with memory.

Code:
STOP 0x00000109: CRITICAL_STRUCTURE_CORRUPTION
Usual causes: Device driver, Breakpoint set with no debugger attached, Hardware (Memory in particular)
BugCheck 109, {a3a039d89e8db8ba, b3b7465ef10a8810, fffff80003930d10, 1}
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : memory_corruption
Take memtest. Run for 8 passes and test each stick in a know good slot for an additional 6 passes.
RAM - Test with Memtest86+
Guide to using Memtest86+ - Geeks to Go Forums

Follow this strategy:





Quote:
The goal is to test all the RAM sticks and all the motherboard slots.

Check your motherboard manual to ensure the RAM sticks are in the recommended motherboard slots. Some motherboards have very specific slots required for the number of RAM sticks installed.

If you get errors, stop the test and continue with the next step.

1. Remove all but one stick of RAM from your computer (this will be RAM stick #1), and run Memtest86 again, for 7 passes.
Be sure to note the RAM stick, use a piece of tape with a number, and note the motherboard slot.
If this stick passes the test then go to step #3.

2. If RAM stick #1 has errors, repeat the test with RAM stick #2 in the same motherboard slot.
If RAM stick #2 passes, this indicates that RAM stick #1 may be bad. If you want to be absolutely sure, re-test RAM stick #1 in another known good slot.
If RAM stick #2 has errors, this indicates another possible bad RAM stick, a possible motherboard slot failure or inadequate settings.
3. Test the next stick of RAM (stick #2) in the next motherboard slot.
If this RAM stick has errors repeat step #2 using a known good stick if possible, or another stick.
If this RAM stick has no errors and both sticks failed in slot#1, test RAM stick #1 in this slot.
4. If you find a stick that passes the test, test it in all the other motherboard slots.

If Part 2 testing shows errors, and all tests in Part 3 show errors, you will need to test the RAM sticks in another computer and/or test other RAM in your computer to identify the problem.

In this way, you can identify whether it is a bad stick of RAM, a bad m... Read more

http://www.sevenforums.com/bsod-help-support/259506-bsod-caused-driver-ntoskrnl-exe-7f1c0.html
Relevancy 87.72%

Hi,

3 days ago I started randomly getting blue screens with DRIVER_POWER_STATE_FAILURE ntoskrnl.exe+7f1c0.

The first time it happened I was playing diablo3, the second time browsing a website, and the third time today I went away from my computer for a few hrs and came back to a blue screen.

I would like to add the only thing that's changed hardware wise is I am using a new keyboard the logitec g110 with a g9x mouse plugged into it. (I'm not sure if this would cause a blue screen error but figured I would mention it in case).

Any help would greatly be appreciated, Thanks!

A:BSOD DRIVER_POWER_STATE_FAILURE casued by ntoskrnl.exe+7f1c0

Caused by "ASUS Charger Driver", it's probably best to uninstall it, I've had some bad experiences with similar software.

fffff880`00dec000 fffff880`00dede80 AiCharger Wed May 05 10:37:36 2010 (4BE12E50)

http://www.sevenforums.com/bsod-help-support/246583-bsod-driver_power_state_failure-casued-ntoskrnl-exe-7f1c0.html
Relevancy 86.86%

Hi,
I built the Ivy Bridge machine described in my system specs a couple of weeks ago, and all went well except that I am getting BSOD?s every few days 5 in all.
Bluescreen view shows them as MEMORY_MANAGEMENT from ntoskrnl.exe+7f1c0 or Ntfs.sys+a4990 though there is one IRQL_NOT_LESS_OR_EQUAL also from ntoskrnl.exe+7f1c0.
No obvious causes that I can see though they often happen in Firefox.
I have:-
Run memtest - all shows as good.
Run sfc /verifyonly no problems
Run Crystal Disk Info which shows Good on all 3 drives
Run the Check Drive for errors (from the drive properties)
So I am throwing myself on your mercy, and hoping you can point me at any further tests I should try.
I attach the zip as described in your howto (I hope).
Thanks in advance for whatever help you can provide.

A:BSOD on New Win7 x64 - ntoskrnl.exe+7f1c0 - random ~ every few days.

These crashes were caused by memory management probably a driver.
Please run these two tests to verify your memory and find which driver is causing the problem.

* If you are overclocking anything reset to default before running these tests.
In other words STOP!!!

* If you have a Raid update its Driver.

Memtest. If you havent run memtest for 6-8 passes please run it again, if you have start with driver verifier





Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5-7 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.



RAM - Test with Memtest86+


Driver Verifier






Quote:
Using Driver Verifier is an iffy proposition.
Most times it'll crash and it'll tell you what the driver is.
But sometimes it'll crash and won't tell you the driver.
Other times it'll crash before you can log in to Windows.
If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise.
Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation"IRP Logging and Force Pending I/O Requests. and click "Next"
NOTE: You can use Low Resource Simulation if you'd like.
From my limited experimentation it makes the BSOD's come faster.
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

If you are using win 8 add these
- Concurrency Stress Test
- DDI compliance checking
Reboot the system and wait for it to crash to the Blue Screen.
Continue to use your system normally, and if you know what causes the crash, do that repeatedly.
The objective here is to get the system to crash because Driver Verifier is stressing the drivers out.
If it doesn't crash for you, then let it run for at least 36 hours of continuous operation.
Reboot into Windows (after the crash) and turn off Driver Verifier by going back in and selecting "Delete existing settings" on the first page, then locate and zip up the memory dump file and upload it with your next post.
If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.

Thanks to JCGriff2 & Usasma.

Sysnative Forums

Driver Reference Table (DRT)




Using Driver Verifier to identify issues with Windows drivers for advanced users

Driver Verifier

Using Driver Verifier (Windows Drivers)

http://www.sevenforums.com/bsod-help-support/232306-bsod-new-win7-x64-ntoskrnl-exe-7f1c0-random-every-few-days.html
Relevancy 86.86%

Hi there I recently updated my NVIDIA Drivers for my GTX from to and immediately received a BSOD when trying to start up Skyrim Since I did a clean install I had no drivers to rollback to so I decided to install the drivers which worked fairly well for about an hour I am now receiving BSODs every - hours from anything such as writing in a word document browsing facebook playing a game or looking at a vimeo video I am running dual monitors one hz and the primary hz with Displayfusion currently have disabled aero and the extended toolbar This was working fine before I updated my drivers I have ran a memtest NVIDIA after update Driver BSOD ntoskrnl.exe+7f1c0 with all positive results and I am running Driver Verifier with all non Microsoft drivers checked The latest crash was with Verifier running and while attempting to load a vimeo page The obvious answer would be to rollback to the NVIDIA drivers however I have a feeling there might be something else amiss I BSOD ntoskrnl.exe+7f1c0 after NVIDIA Driver update thought I might come here first before any more potential frustration and to stamp out any further issues I have attached the auto-compiled folder and a spec list Please let me know if there is any more information you would like me to provide Any help is appreciated

A:BSOD ntoskrnl.exe+7f1c0 after NVIDIA Driver update

Welcome aboard.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 124, {0, fffffa8005d30028, be200000, 5110a}

*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : hardware

Followup: MachineOwner
---------
Follow the guide Stop 0x124 - what it means and what to try, step by step!

http://www.sevenforums.com/bsod-help-support/257209-bsod-ntoskrnl-exe-7f1c0-after-nvidia-driver-update.html
Relevancy 86.86%

Is Windows 7 . . . x64 bit - the original installed OS on the system? windows 7 - an OEM or full retail version? OEM - What is the age of system (hardware)? 6 months - What is the age of OS installation 6 months

For a long time now i have been experiencing stop errors related to ntoskrnl.exe
they are not frequent and occur once every few days.

I would greatly appreciate any help regarding this issue and will be happy to provide any additional information
thanks,
tom

A:Random BSOD error 0x0000004e ntoskrnl.exe+7f1c0

Device Concerns:
Code:
NVIDIA High Definition Audio HDAUDIO\FUNC_01&VEN_10DE&DEV_0016&SUBSYS_10DE0101&REV_1001\5&37CB11FF&0&0001 This device is disabled.
NVIDIA High Definition Audio HDAUDIO\FUNC_01&VEN_10DE&DEV_0016&SUBSYS_10DE0101&REV_1001\5&37CB11FF&0&0101 This device is disabled.
VirtualBox Host-Only Ethernet Adapter ROOT\NET\0000 This device is disabled.
ASUS Bluetooth USB\VID_0B05&PID_179C\6&DF2EE03&0&7 This device is disabled.
NVIDIA High Definition Audio HDAUDIO\FUNC_01&VEN_10DE&DEV_0016&SUBSYS_10DE0101&REV_1001\5&37CB11FF&0&0201 This device is disabled.
NVIDIA High Definition Audio HDAUDIO\FUNC_01&VEN_10DE&DEV_0016&SUBSYS_10DE0101&REV_1001\5&37CB11FF&0&0301 This device is disabled.
Realtek 8185 Extensible 802.11b/g Wireless Device PCI\VEN_10EC&DEV_8185&SUBSYS_822510EC&REV_20\5&D93DF5B&0&0800E6 This device is disabled.
Were you aware of the above? If so, please explain your reasoning so we may understand your troubleshooting steps.
Software Concerns:You need to update to Kaspersky Internet Security 2012. 2011 may cause instability due to the age of the software.
You have a number of programs running. I would recommend that you Troubleshoot Application Conflicts by Performing a Clean Startup leaving only your security software enabled with startup and have services run on startup.

Code:
Start Menu\Programs\ASUS\AI Suite II Public:Start Menu\Programs\ASUS\AI Suite II Public
Start Menu\Programs\ASUS\Disk Unlocker Public:Start Menu\Programs\ASUS\Disk Unlocker Public
Start Menu\Programs\Driver Detective Public:Start Menu\Programs\Driver Detective Public
Recommend removing your ASUS utilities through Start Menu -> Control Panel -> Uninstall a program. They can provide software interfaces with the hardware for overclocking, and even when the overclock is not enabled, that interface can cause instability. They are also not needed for the system to function properly and may reduce system resources.

We do not recommend automated driver update software. It often finds drivers for devices similar to but not exactly the same as the hardware actually on the system. This can lead to conflicts and blue screen crashes. If you need help finding driver updates for a certain device, please start a thread in Drivers - Windows 7 Forums instead of using software. Driver updates are not always necessary and some updates can actually decrease system stability rather than increase it, so it is usually better not to update unless a device or its driver is causing problems with the system. If it ain't broke, don't fix it.

Analysis:It is difficult to find patterns with only one .dmp file. Yours points to memory problems or driver conflicts.If you are overclocking any hardware, please stop.

Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).


   Warning
Before you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. WARNING: The steps that follow can void your warranty!!!

For Part 3: If You Have Errors: If you swap any memory components, follow these steps for ESD safety:Shut down and turn off your computer.
Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
Hold down the power button for 30 seconds to close the circuit and ensure a... Read more

http://www.sevenforums.com/bsod-help-support/237699-random-bsod-error-0x0000004e-ntoskrnl-exe-7f1c0.html
Relevancy 86.86%

Hi everyone i have been having this issue intermittently I do some heavy gaming with no problems at all Batllefield on Ultra for - hours straight Most times this BSOD happens when i have left a torrent to download or i am simply opening a folder in explorer or browsing a web page I have researched this error many many times and have done several things to see if i can fix it myself they are as follows Checked RAM memtest and swapped sticks etc Upgraded firmware for SSD as i heard Vertex was known for BSODs Used the OS just on my Seagate HDD with the SSD uninstalled removed Replaced RAM with Corsair Vengeance GB had BSOD within - hours Made sure i am only using the two main intel GB SATA ports for SSD and HDD set to AHCI Am only running MSE as an antivirus I am BSOD ntoskrnl.exe+7f1c0, Bug Check - 0x000000f4 Random eager for help and will take any advice i can from the wealth of knowledge on these boards Kindly see attached my uploaded documents BSOD Random - ntoskrnl.exe+7f1c0, Bug Check 0x000000f4 and please don't hesitate to ask for more if they are needed Kindest regards Daco

A:BSOD Random - ntoskrnl.exe+7f1c0, Bug Check 0x000000f4

Bluetooth is disabled. Is this deliberate? If so, why? Please re-enable the Bluetooth and update it. Once updated, feel free to disable it again.

Dirty bit is set on the G: drive. There are only 2 ways to fix this:
- run CHKDSK /R /F from and elevated (Run as adminstrator) Command Prompt
- fully format the drive
You can physically remove/disconnect the drive also
I'd suggest running hard drive diagnostics on ALL drives: Hard Drive Diagnostic Procedure

Triple check to make sure you're not using the Marvell controller.
Ensure that the Marvell Controller drivers are the latest available from the manufacturer.

Western Digital software dates from 2008. Please uninstall it.

100 mHz overclock in one of the memory dumps. Is this deliberate, or is there an auto-overclocking app present on the system (sorta like Turbo mode). If there is, please disable it - they've been known to cause BSOD's

Memory dumps seem to point towards a hard drive problem. I'd strongly suggest that you check all hard drives attached to the system - both internal and external (USB) - using this link: Hard Drive Diagnostic Procedure

The following info is just FYI, I've already addressed the issues that I saw in the above paragraphs

- Further info on BSOD error messages available at: http://www.carrona.org/bsodindx.html
- Info on how to troubleshoot BSOD's (DRAFT): http://www.carrona.org/userbsod.html
- How I do it: http://www.carrona.org/howidoit.html

3RD PARTY DRIVERS PRESENT IN THE DUMP FILES
Code:

jraid.sys Tue Aug 10 05:28:44 2010 (4C611BCC)
mv91xx.sys Fri Aug 27 05:49:22 2010 (4C778A22)
mvxxmm.sys Fri Aug 27 05:49:03 2010 (4C778A0F)
amdxata.sys Fri Mar 19 12:18:18 2010 (4BA3A3CA)
MpFilter.sys Fri Mar 09 06:05:26 2012 (4F59E3F6)
asmtxhci.sys Wed Feb 23 21:25:47 2011 (4D65C1AB)
HECIx64.sys Tue Oct 19 19:33:43 2010 (4CBE2AD7)
e1c62x64.sys Tue Sep 21 17:34:15 2010 (4C9924D7)
btath_bus.sys Thu Jun 24 02:17:43 2010 (4C22F887)
RTKVHD64.sys Tue Nov 23 05:14:08 2010 (4CEB93F0)
asmthub3.sys Wed Feb 23 21:25:56 2011 (4D65C1B4)
wdcsam64.sys Wed Apr 16 04:39:08 2008 (4805BB2C)
cpuz135_x64.sys Wed Sep 21 04:23:41 2011 (4E799F0D)
nvlddmkm.sys Tue May 15 03:35:36 2012 (4FB20748)
btath_rcp.sys Thu Jun 24 02:17:21 2010 (4C22F871)
btfilter.sys Tue Mar 08 01:15:22 2011 (4D75C97A)
btath_a2dp.sys Mon Feb 14 20:47:47 2011 (4D59DB43)
btath_hcrp.sys Tue Jun 29 05:30:43 2010 (4C29BD43)
btath_flt.sys Thu Jun 24 02:17:38 2010 (4C22F882)
btath_lwflt.sys Mon Sep 13 04:26:54 2010 (4C8DE04E)

http://www.carrona.org/drivers/driver.php?id=jraid.sys
http://www.carrona.org/drivers/driver.php?id=mv91xx.sys
http://www.carrona.org/drivers/driver.php?id=mvxxmm.sys
http://www.carrona.org/drivers/driver.php?id=amdxata.sys
http://www.carrona.org/drivers/driver.php?id=MpFilter.sys
http://www.carrona.org/drivers/driver.php?id=asmtxhci.sys
http://www.carrona.org/drivers/driver.php?id=HECIx64.sys
http://www.carrona.org/drivers/driver.php?id=e1c62x64.sys
http://www.carrona.org/drivers/driver.php?id=btath_bus.sys
http://www.carrona.org/drivers/driver.php?id=RTKVHD64.sys
http://www.carrona.org/drivers/driver.php?id=asmthub3.sys
http://www.carrona.org/drivers/driver.php?id=wdcsam64.sys
http://www.carrona.org/drivers/driver.php?id=cpuz135_x64.sys
http://www.carrona.org/drivers/driver.php?id=nvlddmkm.sys
http://www.carrona.org/drivers/driver.php?id=btath_rcp.sys
http://www.carrona.org/drivers/driver.php?id=btfilter.sys
http://www.carrona.org/drivers/driver.php?id=btath_a2dp.sys
http://www.carrona.org/drivers/driver.php?id=btath_hcrp.sys
http://www.carrona.org/drivers/driver.php?id=btath_flt.sys
http://www.carrona.org/drivers/driver.php?id=btath_lwflt.sys

BSOD BUGCHECK SUMMARY

Code:

Loading Dump File [C:\Users\FUBAR\_jcgriff2_\dbug\__Kernel__\061312-6130-01.dmp]
Built by: 7601.17803.amd64fre.win7sp1_gdr.120330-1504
Debug session time: Wed Jun 13 02:00:08.741 2... Read more

http://www.sevenforums.com/bsod-help-support/234769-bsod-random-ntoskrnl-exe-7f1c0-bug-check-0x000000f4.html
Relevancy 86.86%

Hi,

I'm haveing some problems with my HTPC, when its going to sleep mode it usually gets a bsod, either right away or during the night.

I have all windows updates applied, i have updated the drivers, updated my ocz agility with newest firmware, tried other ram's also.

I have also tried reinstalling windows without success.

Would realy appriciate if anyone could give me some hints on whats causing this.

A:BSOD when the HTPC is in sleep mode ntoskrnl.exe+7f1c0

Hello Ray and welcome to Sevenforums.

SFC /scannow
We usually ask people to do this command to check if Windows is corrupted. It's the most common used one to check if the Windows files are corrupted. If it'll find errors, it'll restore them.



   Tip
If you're having a custom customization layer on your Aero, it's likely to get restored to default.
Press Start | search 'cmd' | Right-click it
| open as Admin | type SFC /SCANNOW

SFC /SCANNOW Command - System File Checker

Best Regards,
Frederik.

http://www.sevenforums.com/bsod-help-support/248880-bsod-when-htpc-sleep-mode-ntoskrnl-exe-7f1c0.html
Relevancy 86.86%

Keep getting these BSOD when playing COD MW3. Have run memtest86+4.2 and tests passed. Here is my SF Diagnostics report. Would appreciate your help solving this problem

A:BSOD playing COD MW3 error caused by ntoskrnl.exe+7f1c0

Welcome

Most of your dumps show memory as the issue.

Lets start with problematic software:

Code:
Start Menu\Programs\DAEMON Tools Pro Public:Start Menu\Programs\DAEMON Tools Pro Public
Start Menu\Programs\BitDefender 2011 Public:Start Menu\Programs\BitDefender 2011 Public
Start Menu\Programs\Autodesk Public:Start Menu\Programs\Autodesk Public
Daemon tools is a known cause of blue screens. If you search this forum, you will find a lot of threads about it.
Please uninstall BitDefender and Autodesk while we are troubleshooting with your computer.

MSE is recommended by almost all members on our forum and known to be the most compatible antivirus with windows 7.
Microsoft Security Essentials - Free Antivirus for Windows

Run the system file checker 3 times as mentioned in the tutorial below:
SFC /SCANNOW Command - System File Checker

To make sure that hard drive is good run disk check following this tutorial:
Disk Check

Hard drive scan usings SeaTools:
SeaTools | Seagate both long and short tests.

You need to run memtest for 8 passes on each stick preferably overnight.
Guide to using Memtest86+ - Geeks to Go Forums

Let us know your results

http://www.sevenforums.com/bsod-help-support/253293-bsod-playing-cod-mw3-error-caused-ntoskrnl-exe-7f1c0.html
Relevancy 86.86%

I've been using ubuntu on a Live USB to compile some of my C homework I disabled wireless within ubuntu When I restarted into Windows I received an error about a hardware switch being turned off and was unable to use fn f to turn it back on I restarted my pc and went into the live usb again When I went back into windows the wireless was available but my computer BSOD's almost immediately after logging in I am able to boot into SafeMode with networking so Using BSOD on ntoskrnl.exe+7f1c0 Live USB After Ubuntu Boot I'm not sure if the wireless if the actual issue or a related event at all I have run chkdsk r memcheck and have rolled back and then reinstalled the new build of my graphics driver In BlueScreenView I see ntoskrnl exe and PSHED dll listed as the top two events and other BSOD on Boot ntoskrnl.exe+7f1c0 After Using Ubuntu Live USB threads said that PSHED dll was graphics related but that did not ultimately solve the issue I've BSOD on Boot ntoskrnl.exe+7f1c0 After Using Ubuntu Live USB attacked the MiniDump files I have too much ram for a full dump I've also attached the SF Results Thanks for any help that you may be able to offer

A:BSOD on Boot ntoskrnl.exe+7f1c0 After Using Ubuntu Live USB

Welcome aboard.

Here is your actual problem:

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

REGISTRY_ERROR (51)
Something has gone badly wrong with the registry. If a kernel debugger
is available, get a stack trace. It can also indicate that the registry got
an I/O error while trying to read one of its files, so it can be caused by
hardware problems or filesystem corruption.
It may occur due to a failure in a refresh operation, which is used only
in by the security system, and then only when resource limits are encountered.
Arguments:
Arg1: 0000000000000001, (reserved)
Arg2: fffff8a000024370, (reserved)
Arg3: 0000000001643000, depends on where Windows bugchecked, may be pointer to hive
Arg4: 0000000000000374, depends on where Windows bugchecked, may be return code of
HvCheckHive if the hive is corrupt.
In such a situation, you first boot into Advanced Boot Options, choose "last known good configuration" and hit enter, see if it boots or not.

In a deeper analysis of your dump, it indicates Kaspersky :

Code:
fffff880`08f4e838 fffff880`0471a7bfUnable to load image \SystemRoot\system32\DRIVERS\klif.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for klif.sys
*** ERROR: Module load completed but symbols could not be loaded for klif.sys
klif+0x267bf
When we see an Antivirus is there behind the crashes, we suggest to uninstall it and use Microsoft Security Essentials - Free Antivirus for Windows.

But, as the Registry is already corrupted, uninstalling Kaspersky will not bring it back to normal, it just will protect the system from getting more corrupt.

If both of those options fail, do SFC /SCANNOW : Run in Command Prompt at Boot

If it also failed, do a Clean Install Windows 7

Let us know the results.

EDIT: Uninstall the following programs:
Catalyst Control Center
DAEMON Tools Lite
Defraggler
MSI Afterburner
Free up the startup. (you have 30 programs in startup)

Click on the Start button
Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the “Startup” tab.
Deselect all items other than the antivirus.
Apply > OK
Accept the restart.

http://www.sevenforums.com/bsod-help-support/257276-bsod-boot-ntoskrnl-exe-7f1c0-after-using-ubuntu-live-usb.html
Relevancy 84.28%

Windows 7 Pro x64
original installed OS
OEM

hardware is 2.5 years old
original installation of OS


Thanks for your help!!!

A:BSOD error ntoskrnl.exe+7f1c0 - lots of Chrome browser tabs open

Running the last 3 memory dumps (May and June 2012)

Do you have any idea of what this is (it's from your startups):





Quote:
MEI_Startup c:\script_temp\startup.cmd Public HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Run


If not, please run several of these free anti-malware scans to see if you're infected (and if your current protection is compromised): Free Online AntiMalware Resources

Your network drivers date from 2009 - please update them.

If the above doesn't solve your BSOD problems, please post back so we can suggest some further diagnostics.

Good luck!

The following info is just FYI, I've already addressed the issues that I saw in the above paragraphs

- Further info on BSOD error messages available at: http://www.carrona.org/bsodindx.html
- Info on how to troubleshoot BSOD's (DRAFT): http://www.carrona.org/userbsod.html
- How I do it: http://www.carrona.org/howidoit.html

3RD PARTY DRIVERS PRESENT IN THE DUMP FILES

Code:

L8042Kbd.sys Tue Aug 24 13:23:11 2010 (4C73FFFF)
MpFilter.sys Fri Mar 09 06:05:26 2012 (4F59E3F6)
SCDEmu.SYS Mon Apr 12 04:52:25 2010 (4BC2DF49)
amdxata.sys Fri Mar 19 12:18:18 2010 (4BA3A3CA)
dump_iaStorV.sys Thu Jun 10 20:46:19 2010 (4C11875B)
e1y62x64.sys Fri Jun 12 21:16:42 2009 (4A32FDFA)
iaStorV.sys Thu Jun 10 20:46:19 2010 (4C11875B)
igdkmd64.sys Fri Feb 11 14:16:32 2011 (4D558B10)
psi_mf.sys Wed Sep 01 03:53:14 2010 (4C7E066A)
sbmount.SYS Fri Jun 24 17:48:19 2011 (4E050623)
stcvsm.sys Fri Jun 24 17:45:59 2011 (4E050597)
vpchbus.sys Sat Nov 20 06:35:38 2010 (4CE7B28A)
vpcnfltr.sys Sat Nov 20 06:35:20 2010 (4CE7B278)
vpcusb.sys Sat Nov 20 06:35:31 2010 (4CE7B283)
vpcvmm.sys Sat Nov 20 06:35:48 2010 (4CE7B294)

http://www.carrona.org/drivers/driver.php?id=L8042Kbd.sys
http://www.carrona.org/drivers/driver.php?id=MpFilter.sys
http://www.carrona.org/drivers/driver.php?id=SCDEmu.SYS
http://www.carrona.org/drivers/driver.php?id=amdxata.sys
http://www.carrona.org/drivers/driver.php?id=dump_iaStorV.sys
http://www.carrona.org/drivers/driver.php?id=e1y62x64.sys
http://www.carrona.org/drivers/driver.php?id=iaStorV.sys
http://www.carrona.org/drivers/driver.php?id=igdkmd64.sys
http://www.carrona.org/drivers/driver.php?id=psi_mf.sys
http://www.carrona.org/drivers/driver.php?id=sbmount.SYS
http://www.carrona.org/drivers/driver.php?id=stcvsm.sys
http://www.carrona.org/drivers/driver.php?id=vpchbus.sys
http://www.carrona.org/drivers/driver.php?id=vpcnfltr.sys
http://www.carrona.org/drivers/driver.php?id=vpcusb.sys
http://www.carrona.org/drivers/driver.php?id=vpcvmm.sys

BSOD BUGCHECK SUMMARY


Code:

Loading Dump File [C:\Users\John\_jcgriff2_\dbug\__Kernel__\052512-35178-01.dmp]
Built by: 7601.17803.amd64fre.win7sp1_gdr.120330-1504
Debug session time: Fri May 25 13:11:36.081 2012 (UTC - 4:00)
System Uptime: 4 days 1:38:25.829
BugCheck 1A, {41790, fffffa80061fb840, ffff, 0}
Probably caused by : win32k.sys ( win32k!NtGdiCreateDIBSection+3e4 )
BUGCHECK_STR: 0x1a_41790
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
PROCESS_NAME: chrome.exe
FAILURE_BUCKET_ID: X64_0x1a_41790_win32k!NtGdiCreateDIBSection+3e4
Bugcheck code 0000001A
Arguments 00000000`00041790 fffffa80`061fb840 00000000`0000ffff 00000000`00000000
BiosVersion = 080015
BiosReleaseDate = 10/16/2009
SystemManufacturer = powerspec
SystemProductName = B667
MaxSpeed: 2660
CurrentSpeed: 2666
??????????????????????????????????????????????????????????????????????????????????????``
Loading Dump File [C:\Users\John\_jcgriff2_\dbug\__Kernel__\053112-30435-01.dmp]
Built by: 7601.17803.amd64fre.win7sp1_gdr.120330-1504
Debug session time: Thu May 31 19:55:52.468 2012 (UTC - 4:00)
System Uptime: 6 days 6:41:14.201
BugCheck 109, {a3a039d89f132868, 0, a9c65ba56d70b6e9, 101}
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : Un... Read more

http://www.sevenforums.com/bsod-help-support/235657-bsod-error-ntoskrnl-exe-7f1c0-lots-chrome-browser-tabs-open.html
Relevancy 73.1%

Hello I have had two BSODs this week one on Monday and the other one today Thursday Both occured within minutes after Windows had been started resumed from hibernation for the first time that day The same thing happened a few months ago I'm after / first of boot the BSODs 0x00000109 ntoskrnl.exe+7f1c0 day: beginning to see a pattern Other than these quot morning quot BSODs my laptop is operating quite stable It's being used about hours a day yet I have never had a BSOD other than those after the first start of the day Because of this BSODs after first boot of the day: 0x00000109 / ntoskrnl.exe+7f1c0 my gut BSODs after first boot of the day: 0x00000109 / ntoskrnl.exe+7f1c0 feeling is that this is more likely a hardware related BSOD Maybe some part or device is unable to handle the initial temperature rise after cooling down over night Although the laptop is always stored at room temperature Another pattern is that BlueScreenView displays the same values for all three BSODs in these columns Bug Check Code x Parameter a a d Parameter b b e Parameter fffff Parameter Crash Address ntoskrnl exe f c Minidump files are attached Event viewer shows no unusual events between Windows start and BSOD I'm using a genuine Windows copy always with the newest updates from Microsoft and my drivers and BIOS are up to date too BSODs after first boot of the day: 0x00000109 / ntoskrnl.exe+7f1c0 I'm currently running Driver Verifier to see if I can catch a BSOD this way My hardware checks so far RAM memtest found no errors after passes neither did Windows' own Memory Diagnostics Tool I even ran memtest again after letting the laptop cool down to see if the memory would behave differently but still no errors PSU Stated output is V I measured V Seems ok to me HDD Ran various tests HDD scans filesystem checks no errors or bad sectors Any suggestions or interpretations of my minidump files are appreciated

A:BSODs after first boot of the day: 0x00000109 / ntoskrnl.exe+7f1c0

Please upload your msinfo32.nfo file. To get this:
Click on the Start
Type msinfo32 into the Search programs and files box
When it opens, go to File, Save
Save as msinfo32.nfo and save in a place you will remember
Let it finish the process of gathering and saving the system info
Right click the .nfo file, click send to compressed (zipped) folder
Upload the .zip file here.

http://www.sevenforums.com/bsod-help-support/252683-bsods-after-first-boot-day-0x00000109-ntoskrnl-exe-7f1c0.html
Relevancy 65.36%

As the title states I've been getting frequent bluescreens while on youtube and gaming "ntoskrnl.exe+7f1c0" on bluescreens while youtube and Frequent gaming I've just upgraded my computer and the bsods started to come after that The bluescreens that came from the use of youtube were caused by the f c adress in the ntoskrnl exe driver While gaming the bluescreens were caused by the ntoskrnl exe cc driver I would really need help as I'm getting sick of Frequent bluescreens while on youtube and gaming "ntoskrnl.exe+7f1c0" these bluescreens The number of bluescreens I've had while gaming and on youtube is Please help me if you can -Tuukka Is Windows - x -bit or x x - the original installed OS on the system Yes - an OEM or full retail version OEM - OEM came pre-installed on system - Full Retail you purchased it from retailer - What is the age of system hardware Brand new except for the HDD - What is the age of OS installation have you re-installed the OS I haven't had to re-install the OS PS The PS Perform file is maybe in finnish so ask if you need for translation

A:Frequent bluescreens while on youtube and gaming "ntoskrnl.exe+7f1c0"

Bumping, still need help...

http://www.sevenforums.com/bsod-help-support/229703-frequent-bluescreens-while-youtube-gaming-ntoskrnl-exe-7f1c0.html
Relevancy 58.05%

Hello guys I bought new laptop. BSOD new ntoskrnl.exe Acer Asprire V - G laptop week ago But I getting a bsod about times a day Tested RAMs with mestest Checked Hard disk with Hard Disk Sentinel Professional everything looks ok Tried to update all drivers BIOS rewrite windows no help here I am using microsoft security essentials BSOD new laptop. ntoskrnl.exe Any ideas Extra info before updates all BSODs were about ntoskrnl exe efc After updates it is caused by address ntoskrnl exe c Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode f BCP BCP FFFFFA A BCP FFFFF B C BSOD new laptop. ntoskrnl.exe D BCP FFFFFA P S other time BCP was FFFFFA EB E OS Version Service Pack Product Files that help describe the problem C Windows Minidump - - dmp C Users tomy AppData Local Temp WER- - sysdata xml Read our privacy statement online http go microsoft com fwlink linkid amp clcid x If the online privacy statement is not available please read our privacy statement offline C Windows system en-US erofflps txt http mightyupload com m b dzfj j there are my last minidups of ntoskrnl exe efc before updates and of ntoskrnl exe c after updates nbsp

A:BSOD new laptop. ntoskrnl.exe

Hello tomy888 and Welcome to TSG!

Please go to C:\Windows\Minidump. Copy that folder to the desktop and compress it with Winzip, Winrar or 7-Zip. Now upload it to this post. How To: Click Go Advanced and scroll down to Manage Attachments.
 

https://forums.techguy.org/threads/bsod-new-laptop-ntoskrnl-exe.1089029/
Relevancy 58.05%

Hello I've been experiencing the BSOD on my laptop and would like to know if there's anything I can do It started happening ntoskrnl.exe HP BSOD laptop just once a month at first and I didn't really notice it happen but now happens almost every day It doesn't seem to be linked to any specific action I perform but does seems linked to quot ntoskrnl exe quot I've not added any new hardware except I did replace the battery recently I BSOD HP laptop ntoskrnl.exe can't remember the date I started using the new battery but the BSOD happens with the old one as well so far I have tried - performed a system restoring as far back as I could but I could not restore as far back as the earliest crash this year - I reinstalled HP update which updated my drivers and I manually checked they are up to date - uninstalling any programs that were installed around the time the crashes started - running BSOD HP laptop ntoskrnl.exe a deep antivirus scan from bitdefender's own equivalent of safe mode - checking the hard disk for errors I haven't experienced the BSOD in safe mode but haven't spent enough time in safe mode to be sure it will not happen please let me know if you have any suggestions and if there is anything else I can provide Many thanks Simon

A:BSOD HP laptop ntoskrnl.exe

Hi there,

It seems part of the cause is BitDefender,


Code:
Unable to load image \SystemRoot\system32\DRIVERS\avc3.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for avc3.sys
*** ERROR: Module load completed but symbols could not be loaded for avc3.sys
avc3+0xf904
Driver Reference Table - avc3.sys

For the time being, uninstall your Anti-Virus,

AV Uninstallers

And Install Microsoft Security Essentials which we know doesn't cause BSOD's.

Then there are a few instances of your graphics driver,


Code:
Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
nvlddmkm+0x254c35
Which is from 2012,


Code:
Loaded symbol image file: nvlddmkm.sys
Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
Image name: nvlddmkm.sys
Timestamp: Thu Feb 09 18:02:58 2012 (4F347AD2)
CheckSum: 00D075A7
ImageSize: 00D1E000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Try uninstalling just the driver from device manager,

Uninstall Device and Device Driver

Restart and let windows install a new driver and see if that helps.

http://www.sevenforums.com/bsod-help-support/333616-bsod-hp-laptop-ntoskrnl-exe.html
Relevancy 57.62%

BSOD everytime i use bittorrent to download. please help me... im having this problem for a couple of times already...

Dump File; 072811-26301-01.dmp
Crash Time; 7/28/2011 10:38:35 PM
Bug Check String; PFN_LIST_CORRUPT
Bug Check Code; 0x0000004e
Parameter 1; 00000000`00000007
Parameter 2; 00000000`00032570
Parameter 3; 00000000`00000001
Parameter 4; 00000000`00000000
Caused By Driver; ntoskrnl.exe
Caused By Address; ntoskrnl.exe+71f00
File Description; NT Kernel & System
Product Name; Microsoft? Windows? Operating System
Company; Microsoft Corporation
File Version; 6.1.7600.16385 (win7_rtm.090713-1255)
Processor; x64
Crash Address; ntoskrnl.exe+71f00
Stack Address 1
Stack Address 2
Stack Address 3
Computer Name
Full Path; C:\Windows\Minidump\072811-26301-01.dmp
Processors; 2
Count Major Version; 15
Minor Version; 7600
Dump File Size; 278,336

A:having problems with my laptop w/ BSOD - ntoskrnl.exe - please fix me

Please follow these instructions:
http://www.sevenforums.com/crashes-d...tructions.html

http://www.sevenforums.com/bsod-help-support/177757-having-problems-my-laptop-w-bsod-ntoskrnl-exe-please-fix-me.html
Relevancy 57.62%

Hello,

I have a Lenovo IdeaPad Y580 and I recently got a blue screen while it was idle last night.

It is caused in address ntoskrnl.exe+6f400.

Specs:
Windows 7 Home Premium 64-bit
Intel Core i7-3630
Intel HD 4000 + Nvidia GeForce GTX 660M (switchable graphics)
1TB HDD
8GB RAM

Any help here?

Attached is the log.

Thanks,
Greatdrift

A:BSOD While Laptop Was Idle, ntoskrnl.exe

I'm still having the same issue and now my laptop is also freezing from time to time. My have to get it replaced within the next month or two.

http://www.sevenforums.com/bsod-help-support/397391-bsod-while-laptop-idle-ntoskrnl-exe.html
Relevancy 56.76%

Hi everyone,

I'm having an issue with my new laptop running Windows 10. After increasingly short periods of time, I am experiencing a BSOD seemingly at random, with the error message "DRIVER_POWER_STATE_FAILURE". I have looked into my minidump file using BlueScreenViewer and it tells me that the ntoskrnl.exe driver causes the error, which isn't entirely useful. I have also looked at my device manager and there are no yellow exclamation marks suggesting an out of date driver. The BSOD happens more whenever I am gaming, but can crop up at times when I'm just listening to music or browsing on the internet, so I can't be sure of the cause.

That's pretty much the limit of my tech knowledge so I'm pretty stumped on what's causing the issue.

Any help you could give me would be greatly appreciated.

Thanks,
Tom

A:Seemingly random BSOD's on new laptop (ntoskrnl.exe)?

The yellow exclamation marks don't say a driver is outdated, but there are problems with the devices.

Daemon tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known cause for BSOD's.
Please remove Daemon Tools and run the SPTD pass through remover.

Uninstall Daemon ToolsDownload the SPTD standalone installer and follow these steps:
Double click the executable to open itClick on the button shown below

If the button is grayed out, like in the image, there is no more SPTD installation on your system, and you can close the window

   Warning
Programs that claim to update your drivers install either the wrong or corrupted drivers.
If you have installed any driver with DriverEasy, please remove them as it may cause trouble.



Diagnostics Test

 System File Check

Please try following:
Open an admin command promptCopy/paste "sfc/scannow" (without quotes) and press enterWhen it finished reboot your systemOpen again an admin command promptEnter sfc/scannow again
If sfc/scannow does NOT say "Windows Resource Protection did not find any integrity violation" after the second SFC, please upload the cbs.log file located at {windows partition}\Windows\Logs\CBS\, if the file is too large try a 3rd party uploader like dropbox, onedrive, google drive, mediafire etc.
System File Check(SFC a.k.a. Windows Resource Protection) needs to have your system rebooted in order for sfc to try to fix the problems that it finds.

Best suggestion I currently can give is to check your manufacturer for drivers and (re)install them all.
The dumps aren't very useful, no driver has been flagged.

http://www.tenforums.com/bsod-crashes-debugging/37609-seemingly-random-bsods-new-laptop-ntoskrnl-exe.html
Relevancy 56.76%

I've tried posting this over at your sister site sevenforums, but I figure I'd post it here as well. I've had this laptop (Gateway M-2624U) for a few weeks not and I can't seem to find out why it's BSOD'ing on me.

Attached is the BSOD log, along with a picture of the program crashing. I believe ntoskrnl.exe is also preventing Windows Update from working, and making my life a living hell.

Thanks
-Dustin

Edit: here's the link to my old thread on sevenforums.com: http://www.sevenforums.com/crashes-d...hen-using.html

A:BSOD with ntoskrnl.exe. Laptop does not shut down or update.

Welcome
Your BSOD is already being handled by a member of our BSOD team. To give you additional information, here, would just make solving the problem more confusing and difficult. I
will examine your other thread and post any information that may help at our Seven Forum

EDIT: I just read the other thread, the problem seems to be solved. If you have a problem,its under warranty, make the vendor handle the problem

http://www.vistax64.com/crashes-debugging/298414-bsod-ntoskrnl-exe-laptop-does-not-shut-down-update.html
Relevancy 56.76%

I have had a problem booting up my laptop with a Blue Screen of Death error "0x0000003b" caused by "ntoskrnl.exe"

Attached is the DMP file and my system info. I apologise if I have done anything wrong, I am a noobie here.

Thanks in advance.
- Quanny.

A:BSOD booting up Laptop, 0x0000003b, ntoskrnl.exe

Hello Quanny and welcome to Sevenforums.

* When did you start experiencing these crashes?
* What diagnoses have you done so far?
* Is your computer still available for RMA?

BSOD Analyse


Code:
**************************Mon Aug 27 17:34:57.076 2012 (UTC + 2:00)**************************
BugCheck 3B, {c0000005, fffff8000354623c, fffff880058f8d70, 0}
Probably caused by : ntkrnlmp.exe ( nt!PsCheckThreadCpuQuota+8c )
??????????????????????????????????????????????????????????????????????????????????????``
**************************Sun Aug 12 16:24:34.614 2012 (UTC + 2:00)**************************
BugCheck A, {ff, 2, 1, fffff800034fccf2}
Probably caused by : tcpip.sys ( tcpip!InitializeEndpointContextFromParentContext+18 )
??????????????????????????????????????????????????????????????????????????????????????``
**************************Thu Jun 23 13:25:49.195 2011 (UTC + 2:00)**************************
BugCheck 3B, {c0000005, fffff800032c64b4, fffff88008210d60, 0}
Probably caused by : ntkrnlmp.exe ( nt!ExAcquireResourceExclusiveLite+54 )
??????????????????????????????????????????????????????????????????????????????????????``
We usually ask people to do this command to check if Windows is corrupted. It's the most common used one to check if the Windows files are corrupted. If it'll find errors, it'll restore them.



   Tip
If you're having a custom customization layer on your Aero, it's likely to get restored to default.
Press Start | search 'cmd' | Right-click it
| open as Admin | type SFC /SCANNOW

SFC /SCANNOW Command - System File Checker

Most important, answer the questions and I'll dig your issue.

Best Regards,
Frederik.

http://www.sevenforums.com/bsod-help-support/249394-bsod-booting-up-laptop-0x0000003b-ntoskrnl-exe.html
Relevancy 56.76%

Hi

I have a 1 week old Gigabyte P55W laptop. The only programs I have installed are some games (Steam or Origin), Skype, Avast and CCleaner. Today I turned on my laptop and got the BSOD message 'windows encountered an error...'. The BSOD error was 'IRQL_NOT_LESS_OR_EQUAL'.

Following some advice I saw after a quick search I downloaded BlueScreenView and saw the error was related to ntoskrnl.exe. I have attached the dump file run by following the instructions in the Sticky on this forum. I would be very grateful for any advice - it's kind of concerning that a brand new, supposedly high end laptop is having blue screen crashes after 1 week.

Many thanks
Dom

http://www.eightforums.com/bsod-crashes-debugging/73895-bsod-gigabyte-laptop-irql_not_less_or_equal-ntoskrnl-exe.html
Relevancy 56.76%

Hi all,

The past month the laptop of a friend of my gives BSOD and he asked me for help.

His laptop systems specs are:

Microsoft Windows 7 Enterprise
HP EliteBook 8760w
Intel i7-2820QM CPU @ 2.30 ghz (8 CPU's)
Memory 16 gb

The BSOD appear random. Can anybody see something strange in the logs in the attachment.

Thank you all for looking at this thread.

A:Laptop random BSOD Probably caused by : ntoskrnl.exe

Out of the 3 crashdumps you provided, 2 show crashes that look like his video card drivers were involved. The drivers do look fairly old (August 24 2011) so make sure that he keeps em up to date. Other than that, I can say the crashdumps aren't sufficient enough to find exact cause right now.

Before I continue, I want to add that it's probably ill-advisable for him to seek assistance fixing a company laptop by a 'friend', and moreso when that friend is posting details of it to a public forum. Granted, there isn't anything entirely compromising of security from the JCGriff Report, but it doesn't matter. If it's company property, it should be best left to the company's IT department to resolve the issue.

http://www.sevenforums.com/bsod-help-support/228528-laptop-random-bsod-probably-caused-ntoskrnl-exe.html
Relevancy 56.76%

I re installed my laptop a few weeks ago and installed all the HP Envy drivers recommended, when this problem started appearing. So I'm assuming it's driver related but I have no idea which.

I never get BSODs during normal use, but when I leave the laptop unattended and it goes into sleep mode, it might or might not BSOD with "DRIVER_POWER_STATE_FAILURE" or "DRIVER_IRQL_NOT_LESS_OR_EQUAL". It happens only like 20% of the time, seemingly at random.

Thanks in advance!

A:Random BSOD when laptop tries to sleep (ntoskrnl.exe)

Welcome to SevenForums.

Kaspersky antivirus is causing BSOD-s for you. Please uninstall it and use Microsoft Security Essentials at least to test.

Code:
STOP 0x000000D1: DRIVER_IRQL_NOT_LESS_OR_EQUAL
Usual causes: Device driver
BugCheck D1, {0, 2, 8, 0}
*** WARNING: Unable to verify timestamp for klim6.sys
*** ERROR: Module load completed but symbols could not be loaded for klim6.sys
Probably caused by : klim6.sys ( klim6+28f0 )
...
fffff800`00b9b768 fffff880`04bb411dUnable to load image \SystemRoot\system32\DRIVERS\kneps.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for kneps.sys
*** ERROR: Module load completed but symbols could not be loaded for kneps.sys
kneps+0x311d
Removal tool for Kaspersky Lab products
Recommended antivirus program for Windows 7 based on stability compared to others:-
Microsoft Security Essentials - Free Antivirus for Windows
Microsoft Security Essentials Download | Free Spyware Protection
Malwarebytes - The Free version
Good and Free system security combination.
Do not start the free trial of Malware Bytes; remember to deselect that option when prompted.

Run a full scan with both (separately) once downloaded, installed and updated.

Update your graphic card drivers to their latest. Click on the Start ► Control Panel ► Programs ► Uninstall a program ► Uninstall everything related to; ATI. Reboot the computer if you are prompted.

Download and install drivers from the link below: (Choose custom install and avoid CCC - Catalyst control center) during installation.Download AMD Catalyst Drivers 12.10 Vista 64 - FileHippo.com

Update Intel Graphics Drivers:Source: Driver Reference TableUpdate Applian Network Service/Applian Technologies APPLIAND helper driversSource: Driver Reference TableUpdate Intel? Wireless WiFi Link Adapter drivers:Source: Driver Reference TableCheck if enabling or disabling USB selective suspense helps:USB Selective Suspend - Turn On or Off
Run the System File Checker that scans the of all protected Windows 7 system files and replaces incorrect corrupted, changed/modified, or damaged versions with the correct versions if possible:
Click on the
Type CMD on Search
Left click and Run as Administrator
Type SFC /scannow
Full tutorial here:SFC /SCANNOW Command - System File Checker
Run Disk Check on your hard disk for file system errors and bad sectors on it:Disk Check
Free up the start-up, nothing except the antivirus is usually needed.Startup Programs - Change
Troubleshoot Application Conflicts by Performing a Clean Startup
Let us know the results.
Good luck

http://www.sevenforums.com/bsod-help-support/264820-random-bsod-when-laptop-tries-sleep-ntoskrnl-exe.html
Relevancy 56.33%

hi everyone, i have a trouble with my laptop HP folio 9470m win 7 Pro 64 bit. that's about error BSOD of my laptop . Please help me, thanks so much

Attachment 341519

A:BSOD error Ntoskrnl.exe win 7 Pro 64 bit laptop HP folio 9470m

Please continue on your previous thread.

http://www.sevenforums.com/bsod-help...exe-87f7e.html

http://www.sevenforums.com/bsod-help-support/353396-bsod-error-ntoskrnl-exe-win-7-pro-64-bit-laptop-hp-folio-9470m.html
Relevancy 56.33%

Hi everyone, I have a trouble with my laptop HP folio 9470m win 7 pro 64bit . Please help me , thanks so much
 

A:Ntoskrnl.exe cause BSOD laptop HP folio 9470m win 7 pro 64bit

Try testing the hard drive and the memory. To test the hard drive go to Computer and right-click on the C drive, select Properties, tools, check now. Set a disk check on the next start up. Let the check finish. To test the memory go here:
http://www.memtest.org/
Download version 5.01 and burn it to a CD or DVD. Boot the laptop with this disk and run Memtest86 for at least 7 passes. No errors are allowed...
 

http://www.techspot.com/community/topics/ntoskrnl-exe-cause-bsod-laptop-hp-folio-9470m-win-7-pro-64bit.207116/
Relevancy 56.33%

Most nights when I close my laptop to go to bed, I wake up in the morning to either a BSOD, or the laptop will be off. I'll turn it back on to find the "start windows normally" screen, and a dialogue box asking to search for solutions to the error. This happens almost every night for the past few weeks.

I have recently reinstalled/update a lot of my drivers, but nothing is seeming to work. Any help would be greatly appreciated.

A:BSOD at night after closing laptop, ntoskrnl.exe 0x0000000A

It is caused by Netgear Geanie.

Either you may attempt to update it or you may want to uninstall it.

Let us know the results as per your decision.
________________________________________

Code:
........................
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {fffffa8039769178, 2, 1, fffff80002edf035}

*** WARNING: Unable to verify timestamp for npf.sys
*** ERROR: Module load completed but symbols could not be loaded for npf.sys
Probably caused by : npf.sys ( npf+2bb2 )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: fffffa8039769178, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff80002edf035, address which referenced memory

Debugging Details:
------------------
WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff8000310e100
GetUlongFromAddress: unable to read from fffff8000310e1c0
fffffa8039769178 Nonpaged pool

CURRENT_IRQL: 2

FAULTING_IP:
nt!KeAcquireSpinLockRaiseToDpc+55
fffff800`02edf035 f0480fba2900 lock bts qword ptr [rcx],0

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

BUGCHECK_STR: 0xA

PROCESS_NAME: System

ANALYSIS_VERSION: 6.3.9600.17237 (debuggers(dbg).140716-0327) amd64fre

TRAP_FRAME: fffff880033066d0 -- (.trap 0xfffff880033066d0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000002 rbx=0000000000000000 rcx=fffffa8039769178
rdx=0000000000187000 rsi=0000000000000000 rdi=0000000000000000
rip=fffff80002edf035 rsp=fffff88003306860 rbp=fffffa8039769178
r8=fffffa8006a0a528 r9=0000000000000000 r10=fffffffffffffffe
r11=0000000000000000 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei pl nz na pe nc
nt!KeAcquireSpinLockRaiseToDpc+0x55:
fffff800`02edf035 f0480fba2900 lock bts qword ptr [rcx],0 ds:fffffa80`39769178=????????????????
Resetting default scope

LAST_CONTROL_TRANSFER: from fffff80002ed4469 to fffff80002ed4ec0

STACK_TEXT:
fffff880`03306588 fffff800`02ed4469 : 00000000`0000000a fffffa80`39769178 00000000`00000002 00000000`00000001 : nt!KeBugCheckEx
fffff880`03306590 fffff800`02ed30e0 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiBugCheckDispatch+0x69
fffff880`033066d0 fffff800`02edf035 : 00000000`00000000 fffff880`018255b2 00000000`00000000 00000000`00000000 : nt!KiPageFault+0x260
fffff880`03306860 fffff880`06082bb2 : 00000000`00000001 fffffa80`0b7d41a0 fffffa80`0b928ce0 fffffa80`39766000 : nt!KeAcquireSpinLockRaiseToDpc+0x55
fffff880`033068b0 00000000`00000001 : fffffa80`0b7d41a0 fffffa80`0b928ce0 fffffa80`39766000 00000000`00060000 : npf+0x2bb2
fffff880`033068b... Read more

http://www.sevenforums.com/bsod-help-support/361110-bsod-night-after-closing-laptop-ntoskrnl-exe-0x0000000a.html
Relevancy 56.33%

Hi,

Have a brand new laptop, but in the last 2 weeks, I've been getting several BSOD's. Did the Dell onboard diagnostic which didn't find fault with the hardware.

The BSOD's are completely random, can't really see a pattern. When it happens, it normally happens in quick succession. Had a look with bluescreenview, but because there's so many different files giving issues, I thought I'll check here first.

Attached please find the file, or let me know if I should do anything else.

I've just enabled Driver Verifier, so will see how that goes.

Dell 17R laptop
Intel Core i7-4500
16gb Ram
ATI Radeon 8870M Dedicated / Intel HD onboard
Windows 8 SL 64-bit

Thanks!

A:Random BSOD on Dell laptop - umbus.sys and ntoskrnl.exe

Most of your dumpfiles blames Probably caused by : atikmdag.sys ( atikmdag+722feb )
This is the driver for your AMD 8870M videocard.
Because you have a Dell Inspiron 5737 you need customized drivers from Dell.
Please download the windows 8 drivers from here Driver Details | Dell South Africa

http://www.eightforums.com/bsod-crashes-debugging/47489-random-bsod-dell-laptop-umbus-sys-ntoskrnl-exe.html
Relevancy 55.9%

My Laptop randomly got a BSOD a few days ago and it has continued since. The laptop is just over two years old. I tried a system restore but it didn't solve the problem. The BSOD happens no matter what I am doing and sometimes the laptop reboots or freezes instead. Safe mode works perfectly. I tried memtest86 which showed no errors and ran for five passes. Bluescreenview showed ntoskrnl.exe consistently in each dump report. Diagnostics in attachment below. Please help. Thanks in advance.

A:Toshiba laptop randomly gets BSOD caused by driver ntoskrnl.exe

Welcome to the forum.

Lets start with Driver verifier:
Driver Verifier - Enable and Disable

As the dump is indicating memory corruption test your memory using Memtest86 for 8 passes:
RAM - Test with Memtest86+

Source





Quote:
tdcmdpst.sys
Toshiba ODD Writing Driver (CD/DVD)
http://www.csd.toshiba.com/cgi-bin/t.../jsp/home.jsp#


Update to the latest drivers for your Toshiba ODD as its of 2009 = quite old.


Code:
0: kd> lmvm tdcmdpst
start end module name
fffff880`041e2000 fffff880`041ec000 tdcmdpst T (no symbols)
Loaded symbol image file: tdcmdpst.sys
Image path: \SystemRoot\system32\DRIVERS\tdcmdpst.sys
Image name: tdcmdpst.sys
Timestamp: Thu Jul 30 14:39:35 2009 (4A715C47)
CheckSum: 0000BC23
ImageSize: 0000A000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Also do a hard disk test with Seatools
SeaTools for Windows | Seagate

Keep us posted.

http://www.sevenforums.com/bsod-help-support/250154-toshiba-laptop-randomly-gets-bsod-caused-driver-ntoskrnl-exe.html
Relevancy 53.32%

Hey guys so I've been getting some random BSOD errors every few days or so I usually leave my computer on when I am at work or sleep and either when I come home Random BSOD error ntoskrnl.exe (address driver ntoskrnl.exe+74ec0) or wake up my computer is off So I turn it on and it says that the computer didn't Random BSOD error driver ntoskrnl.exe (address ntoskrnl.exe+74ec0) shut down properly when I start up I downloaded the BlueScreenView and noticed I've had some BSOD three times within days One Random BSOD error driver ntoskrnl.exe (address ntoskrnl.exe+74ec0) was a PAGE FAULT IN NONPAGED AREA error which I believe was a RAM problem i bought new RAM and installed it plus OCed it to but I believe it was making my system unstable so I reset the speed to default and haven't gotten that error again but after that I've gotten two IRQL NOT LESS OR EQUAL errors related to ntoskrnl exe I did some research online and from what I read it could be a number of problems I'm just not sure where to start and could really use some guidance and advice I uploaded my dmp files for anyone who knows how to look at these Thank in advance

A:Random BSOD error driver ntoskrnl.exe (address ntoskrnl.exe+74ec0)

Welcome to 7F. I'll take a look at your dumps and see if I can get you BSOD free.


One

 NETGEAR NEUTRAL WIRELESS SOLUTION

Your Netgear Neutral Wireless Solution driver has been flagged. It is quite old a could probably do with updating. Check for updates here
Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {0, 2, 1, fffff800034c88ac}

*** WARNING: Unable to verify timestamp for scmndisp.sys
*** ERROR: Module load completed but symbols could not be loaded for scmndisp.sys
Probably caused by : scmndisp.sys ( scmndisp+16d1 )

Followup: MachineOwner
---------

1: kd> lmvm scmndisp
start end module name
fffff880`0188b000 fffff880`01895000 scmndisp T (no symbols)
Loaded symbol image file: scmndisp.sys
Image path: \SystemRoot\system32\DRIVERS\scmndisp.sys
Image name: scmndisp.sys
Timestamp: Fri May 27 11:30:22 2011 (4DDF7D3E)
CheckSum: 00009C0C
ImageSize: 0000A000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4


Two

 HARDWARE DIAGNOSTICS

A few of your dumps (0x50, 0x124) are pointing towards hardware errors. 0x124s are usually always hardware errors but rarely give us an indication of what the problem actually is. In this case we may have struck lucky as this particular one shows up ASUS AI Suite III. The utilities listed below are the ones I'm concerned about.Attachment 353971


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa800752d028, Address of the WHEA_ERROR_RECORD structure.
Arg3: 00000000bf800000, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000000000124, Low order 32-bits of the MCi_STATUS value.

Debugging Details:
------------------
BUGCHECK_STR: 0x124_GenuineIntel

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

PROCESS_NAME: AISuite3.exe

CURRENT_IRQL: f

ANALYSIS_VERSION: 6.3.9600.17029 (debuggers(dbg).140219-1702) amd64fre
We have seen motherboard packaged utilities cause 0x124s in the past and it could be the case here.
Uninstall ASUS AI Suite III and test the system for stability.
Run SeaTools to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use
Download and run MemTest86+ to test your RAM. RAM - Test with Memtest86+


   Note
Attachment 353972 Run MemTest86+ for at least 8 passes. Ideally set it off before you go to bed and leave it overnight, we're looking for zero errors here. A single error will show something's going bad with your RAM.


Three

 NVIDIA GPU

You've also received a 0x116 which is a VIDEO_TDR_ERROR (Timeout Detection & Recovery) which means your GPU driver has crashed and has failed to recover in time. This could be down to the driver, the card itself or possibly the power to the card.
Code:
******************************************************************************... Read more

http://www.sevenforums.com/bsod-help-support/365399-random-bsod-error-driver-ntoskrnl-exe-address-ntoskrnl-exe-74ec0.html
Relevancy 52.89%

BSOD random, probably under heavy load situations. I dont know how to do.


DM log collector file attached

many thanks

A:BSOD random most times ntoskrnl.exe+748c0 and ntoskrnl.exe+74ec0

Hi berdini.


Code:
DEFAULT_BUCKET_ID: GS_FALSE_POSITIVE_MISSING_GSFRAME
Scan the system for possible virus infection with the following programs.
Anti-rootkit utility TDSSKiller
Windows Defender Offline
Let us know the results.
____________________________________

Code:
BugCheck F7, {fffff8800a01ff08, f8800125d135, ffff077ffeda2eca, 0}

Probably caused by : Ntfs.sys ( Ntfs!_report_gsfailure+26 )

Followup: MachineOwner
---------

http://www.sevenforums.com/bsod-help-support/373211-bsod-random-most-times-ntoskrnl-exe-748c0-ntoskrnl-exe-74ec0.html
Relevancy 52.89%

Hi to make things easier for you dxgmms1.sys,ntoskrnl.exe,Ntfs.sys BSOD Address:ntoskrnl.exe+75bc0; below is the Bug Check String Driver and crash address SYSTEM SERVICE EXCEPTION dxgmms sys ntoskrnl exe bc MEMORY MANAGEMENT ntoskrnl exe ntoskrnl exe bc SYSTEM SERVICE EXCEPTION ntoskrnl exe ntoskrnl exe bc NTFS FILE SYSTEM Ntfs sys ntoskrnl exe bc IRQL NOT LESS OR EQUAL ntoskrnl exe ntoskrnl exe bc unrelated how could I make nice table above I have searched the forum Problem BSOD randomly usually graphics related eg flash games in chrome graphics related software Mathematica Problem I use an internet usb G device to connect to internet Every morning the device will not connect to internet and computer will hang on shutting down screen when I BSOD Address:ntoskrnl.exe+75bc0; dxgmms1.sys,ntoskrnl.exe,Ntfs.sys restart I have to manually turn off and back on again I think this may be a dying capacitor on motherboard that needs boot's to get excited Problem Chrome quot aw snap quot happens regularly and is usually flash content related even ad banners seem to cause it from time to time I have reinstalled chrome checked plugins etc etc no luck Internet explorer runs stable but for example in flash games it seems to momentarily freeze and then catch up BSOD Address:ntoskrnl.exe+75bc0; dxgmms1.sys,ntoskrnl.exe,Ntfs.sys with itself again These are moments where I think chrome would have crashed Things I've done SFC scan All's well Memtest I did pass it took an hour everything fine Will put it on over night tonight Checked for latest drivers Also have latest BIOS Checked win update Ran Intel Burn everything ok max stress over Gb RAM run min max temp thank you Noctua NH-C P this is with quiet adaptor too lol Ran malwarebytes found nothing toxic Ran SSDlife Free health SSD seems fine Bought a new motherboard assuming that the current one is going bad I haven't switched over to it yet and thought I should investigate a little further before I do ie bad RAM CPU Power Supply SSD CPU seems fine RAM passed test but will test further My own quot opinion quot until today was that there is a fault on motherboard probably with usb hardware Now I realise that it could be the power supply but I have no way to test this bar buy a new one My analysis bad motherboard or bad PSU Either way not getting away with cheap fix methinks UPDATE I enabled verifier exe using this Driver Verifier - Enable and Disable Windows crashes just before going to desktop I had to boot last known config to get up and running again IE I CAN RELIABLY CREATE BSOD USING VERIFIER EXE WITH GIVEN INSTRUCTIONS So I am going to try focusing on drivers loaded at startup by process of elimination Is there a quick way to find out which one Below is the Check String Driver and crash address for the BSOD's when using verifier exe IRQL NOT LESS OR EQUAL ntoskrnl exe ntoskrnl exe bc DRIVER IRQL NOT LESS OR EQUAL RNDISMPX SYS RNDISMPX SYS a UPDATE If I choose or more non Microsoft drivers in verifier exe I get BSOD different check strings but always at the same address Also computer seems more unstable since engaging with verifier exe I feel I have given a thorough evaluation based on information in this forum and would appreciate feedback from those with more expertise than I UPDATE Another Memtest gave errors on pass Questions any chance poor power supply can cause this anyone have experience increasing voltage to make this go away would bad RAM explain all my problems ok fine i'll go through RAM and the slots and find the bad one sigh major sigh positively tragic sigh UPDATE Started with slot with stick of RAM Did memtest but had an idea I turned on verifier exe with all rd party drivers selected and my theory was to replicate the BSOD I got earlier at startup Went through each slot each RAM combo's of RAM and then to add insult to injury with all sticks in exactly same as before no BSOD Life is tough So maybe RAM wasn't properly seated all this time or maybe I need to test the RAM proper... Read more

A:BSOD Address:ntoskrnl.exe+75bc0; dxgmms1.sys,ntoskrnl.exe,Ntfs.sys

**************UPDATE 5 ****************




The sequence of events went as follows.
RAM test 1 pass was passed. Verifier.exe caused immediate BSOD on windows start when activated. Trying to hunt down drivers revealed any combo of 3 or more drivers gave BSOD at startup. Randomly decided to recheck RAM. Failed memtest after 27 minutes pass 1. Found one RAM stick that passed after one pass slot0. Got fed up of waiting for other slot's. Devised a plan to use verifier to check the RAM by seeing which combo's of RAM sticks gave BSOD on startup. All combo's passed. And now verifier does not give BSOD on any setting. Began to hate life. Cheered myself up with prospect of sleep. Put all 16 Gb RAM in properly and ran mentest for 18 hours, 6 passes. No error. Still no verifier.exe errors when enabled. Wrote this update.


If RAM failed after 27min one test, and then after swapping around a retest of 18 hours has no error, one would presume the RAM may be ok. Equally, I believe one could say the RAM is suspect. So, if the test is failed it really doesn't tell us anything except there is a problem somewhere. But we know there is a problem since we have BSOD!!! If I hadn't rerun the test I wouldn't question the RAM.

So the question is: how do I categorically ensure that a stick of RAM is good? Is memtest on RAM with an alternative working computer enough?



In summary:

I ran memtest for 18 hours, which was 6 passes. No problems detected. Using verifier.exe with protocols given on this forum I no longer get BSOD.

Currently my hypothesis is that the RAM was never seated correctly, or given that it takes a bit of force to insert correctly into motherboard, the flexing has at least temporarily defused whatever fault was causing my BSOD. Tenuous I know. But I really have no other explanation other than something somewhere on the motherboard or power is failing, or even the RAM.

http://www.sevenforums.com/bsod-help-support/351171-bsod-address-ntoskrnl-exe-75bc0-dxgmms1-sys-ntoskrnl-exe-ntfs-sys.html
Relevancy 52.89%

Got my first blue screen of death tonight had firefox opened one watching youtube video another browsing internet After bsod /adress (ntoskrnl.exe+72a40) caused by driver (ntoskrnl.exe) BSOD it restarted i login but just black screen with cursor ctrl alt delete worked so i shut my computer down Boot up normally after check my minidump file bsod cause BSOD caused by driver (ntoskrnl.exe) /adress (ntoskrnl.exe+72a40) by ntoskrnl exe Did little search on google find BSOD caused by driver (ntoskrnl.exe) /adress (ntoskrnl.exe+72a40) has to do with ram and hard drive Downloaded wd data life guard diagnostic for my mechanic drive which is healthy but my ssd on shows failed end to end error rate value threshold worst is all in SMART statue Im not sure if i can trust this wd diagnostic on my crucial ssd there are alot of unknown in SMART statue too Theres no ssd diagnotic for crucial there is a firmware not sure if it helps So i downloaded and ran crystaldiskinfo on my ssd health statues says good it doesnt say end to end error rate like wd Instead same ID B line says quot unused reserve nand blocks quot instead Is my ssd good i havent ran a test on my ram yet This is almost month old build Asrock x x killer i k gtx w crucial x gb crucial gb ssd wd blue tb Heres info of bsod with bluescreenview Bug Check String- IRQL GT ZERO AT SYSTEM SERVICE Bug Check Code - x a Parameter - dc a Parameter - Parameter - Parameter - fffff b Caused By Driver- ntoskrnl exe Caused By Address- ntoskrnl exe a File Description- NT Kernel amp System

A:BSOD caused by driver (ntoskrnl.exe) /adress (ntoskrnl.exe+72a40)

Blue Screen of Death (BSOD) Posting Instructions

http://www.sevenforums.com/bsod-help-support/367819-bsod-caused-driver-ntoskrnl-exe-adress-ntoskrnl-exe-72a40.html
Relevancy 52.89%

i keep getting BSOD when playing game new graphics i dont know where to start when its comes to BSOD stuff

110414-10576-01.dmp 11/4/2014 10:48:39 PM 0x00000124 00000000`00000000 fffffa80`0af318f8 00000000`00000000 00000000`00000000 ntoskrnl.exe ntoskrnl.exe+4a63cc NT Kernel & System Microsoft? Windows? Operating System Microsoft Corporation 6.1.7600.16385 (win7_rtm.090713-1255) x64 ntoskrnl.exe+4a63cc C:\Windows\Minidump\110414-10576-01.dmp 6 15 7600 262,144 11/4/2014 10:48:41 PM is some info i dont know what else yall need

A:0x00000124 ntoskrnl.exe ntoskrnl.exe+4a63cc BSOD Error runninganygame

Please Help

http://www.sevenforums.com/bsod-help-support/351242-0x00000124-ntoskrnl-exe-ntoskrnl-exe-4a63cc-bsod-error-runninganygame.html
Relevancy 52.89%

I'm getting random Blue Screens and can't figure out why. I'm not running any hardcore programs. I'm mostly just using Microsoft Office and Firefox. The BSOD's seem to happen when I'm in Outlook, Excel or Firefox. Haven't been able to determine exactly which at the time as I'm moving back and forth between them quite often.

I've tried the SFC command and it didn't find anything. I used BlueScreenViewer but not a lot of help. All drivers for sound and video have been updated. I've also updated the firmware to the Crucial M4 SSD version 040H.

Any insight would be great.

Specs:
Laptop - HP EliteBook 8560w
CPU - Intel i7-2670QM
RAM - Hynix/Hyundai 8.0 GB Ram
SSD - M4-CT256M4 SSD
Audio - AMD High Definition Audio
Video - AMD FirePro M5950
OS - Windows 7 Pro 64-bit

A:Random BSOD Reporting ntoskrnl.exe+75c40 & ntoskrnl.exe+7efc0

Update the firmware of your Crucial M4-CT256M4SSD2.

And, Uninstall McAfee Using McAfee Removal Tool. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.
Download, install and update those, and then run full system scans with both of them, one by one.

Free up the startup.
Click on the Start button
Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the “Startup” tab.
Deselect all items other than the antivirus and touchpad driver SynTPEnh.
Apply > OK
Accept then restart.
Let us know the results.

http://www.sevenforums.com/bsod-help-support/281927-random-bsod-reporting-ntoskrnl-exe-75c40-ntoskrnl-exe-7efc0.html
Relevancy 52.89%

Jan , Crash Address All !! BSOD ntoskrnl.exe+80640 the Time ntoskrnl.exe ------------------------------------------- How to Solve - I've uninstalled my windows and recover my laptop with recovery DVD to it's original factory state original windows - Never installed Norton internet security again I'm using Microsoft Security Essentials now - Updated my Graphic Card Driver Intel Wifi Driver Sound Card Driver And some other drivers It's been two months now with no BSOD Thanks to dear Arc and gregrocker Thank you guys ------------------------------------------- Oct ------------------------------------------- Hi guys It's almost a year that I have problems with BSOD ntoskrnl.exe , All the Time !! Crash Address ntoskrnl.exe+80640 BSODs it use to be Atikmdag BSOD but I solve that with updating my Graphic card Driver and Changing Atikmdag sys file in Windows System folder But now it's about months that I get ntoskrnl exe BSODs in lot's of situations Web surfing Windows log on Working with Unity Working with files and Really lot's of Times Even in Safe Mode with Networking I guess it's because of my Network driver because I got BSOD in Safe Mode with Network but I never got a BSOD in normal Safe mode BTW I dunno how to solve it Please Help me these BSODs are sooooooooo annoying Here is my System Specs It's Msi GX CPU Intel R Core TM i CPU M GHz Main MICRO-STAR INTERNATIONAL CO LTD MS- Bios BIOS Date Ver Memory GB HDD ST AS ATA Device Sound Card AMD High Definition Audio Device High Definition Audio Device Graphic ATI Mobility Radeon HD Series - GB GDDR OS Microsoft Windows Ultimate -bit Multiprocessor Free Service Pack it's weird that I've finished writing this without a BSOD Here is the Zip file Created with SF Diagnostic Tool

A:BSOD ntoskrnl.exe , All the Time !! Crash Address ntoskrnl.exe+80640

Code:
fffff800`00b9cc48 fffff880`010b75fcUnable to load image \SystemRoot\System32\Drivers\sptd.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for sptd.sys
*** ERROR: Module load completed but symbols could not be loaded for sptd.sys
sptd+0x4b5fc
Daemon Tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known BSOD causer. Uninstall Alcohol 120% at first. Then download SPTD standalone installer from Disk-Tools.com, and execute the downloaded file as guided below :
Double click to open it.
Click this button only:

If it is grayed out, as in the picture, there is no more SPTD in your system, and you just close the window.
Next uninstall Virtual CloneDrive, as vclone.sys is as fatal as SPTD.sys, too.
After doing these two, report the situation back.

http://www.sevenforums.com/bsod-help-support/309093-bsod-ntoskrnl-exe-all-time-crash-address-ntoskrnl-exe-80640-a.html
Relevancy 52.46%

When I put my pc in sleep mode it often crashes: the screen goes normally in sleep mode, but the pc continues to stay awake for several minutes than BSOD & restart or BSOD & shut off.
Thanks to BlueScreenView I found what is seemingly the guilty process, but I don't know what to do now.
Attachment 315989
Thanks
Also, sorry for my bad english.

A:BSOD when goes sleep, ntoskrnl.exe+e96d2/ntoskrnl.exe+81e7a

Your HUAWEI Mobile Connect driver is causing issues here.


Code:
*** WARNING: Unable to verify timestamp for ew_jubusenum.sys
*** ERROR: Module load completed but symbols could not be loaded for ew_jubusenum.sys
Probably caused by : ew_jubusenum.sys
If it's a necessary driver then update it but if not then please completely remove it.
I'm not that familiar with such devices but it should be under Network Adapters, right click on the device and click properties, then click on the driver tab and update.


Code:
fffff880`015e0000 fffff880`015fc000 ew_jubusenum T (no symbols)
Loaded symbol image file: ew_jubusenum.sys
Image path: \SystemRoot\system32\DRIVERS\ew_jubusenum.sys
Image name: ew_jubusenum.sys
Timestamp: Mon Aug 20 01:55:56 2012 (50318B1C)
CheckSum: 0001CF99
ImageSize: 0001C000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

http://www.sevenforums.com/bsod-help-support/330151-bsod-when-goes-sleep-ntoskrnl-exe-e96d2-ntoskrnl-exe-81e7a.html
Relevancy 51.6%

Hi there,

Recently I've been getting BSOD while playing WoW. I'm not sure what details to give other than the dump so I'll just tell you about my computer:

Intel i5 4690 3.5-3.9 GHZ
EVGA GTX 970 SSC (super superclocked - the fans are designed not to turn on until card reaches 60c)
16gb Hyper X Fury ram
1tb WD Black HDD
Windows 7 OS

I noticed that I haven't crashed yet while EVGA Precision X is up (it has a custom aggressive fan curve I made). Maybe this has to do with the fact that it replaces fan drivers, or something? I don't know. I'm pretty clueless as to what's going on because all these parts are pretty new and it only recently started, but it's crashed three times today. Here are the dumps.
Any help you guys can give would be greatly greatly appreciated. Thanks a ton!
 

A:BSOD ntoskrnl.exe address ntoskrnl.exe+74ec0

Any ideas? It happened again while using EVGA Precision.
 

https://forums.techguy.org/threads/bsod-ntoskrnl-exe-address-ntoskrnl-exe-74ec0.1145229/
Relevancy 51.6%

Hello Recently I got a few bluescreens while playing World of Warcraft which I thought was very weird because all of my hardware is pretty new Here is some info about my computer Intel i - GHZ EVGA GTX SSC super superclocked - the fans are designed not to turn on until card reaches c gb Hyper X Fury ram tb WD Black HDD Windows OS At first I noticed three bluescreens then I used EVGA Precision X with a custom aggressive fan profile and BSOD ntoskrnl.exe+74ec0 ntoskrnl.exe address the problem went away temporarily but then the computer crashed later on I'm not sure if that's relevant or not I ran a diagnostic on my harddrive and processor and both were fine The RAM seems more difficult to test because it said something about usb drives so I decied to stray away from that unless it was absolutely necessary and then get help from someone who BSOD ntoskrnl.exe address ntoskrnl.exe+74ec0 knows what they're doing I am going to upload the dump files that were saved by bluescreenview Any help at all would be greatly appreciated

A:BSOD ntoskrnl.exe address ntoskrnl.exe+74ec0

CRITICAL_OBJECT_TERMINATION BSODs (0xf4) are usually related to an issue with the hard drive.

If you have an SSD, make sure that the firmware is upgraded.

If HDD, run SeaTools for DOS, LONG test - Hard Drive (HDD) Diagnostics - Sysnative Forums

Regards. . .

jcgriff2

`

http://www.techsupportforum.com/forums/f299/bsod-ntoskrnl-exe-address-ntoskrnl-exe-74ec0-975273.html
Relevancy 51.6%

I keep getting a BSOD (Critical_Object_Termination) but have no idea what is causing the issue. I tried in vain to debug my own minidump files but ended up getting nowhere.

So far i have run MemTest over the weekend with 107 passes. I also ran Prime95 64-bit for 4 hours on each of the FFT tests without error.

I have enabled driver verifier (following the guide on this site) and this has not caused anynew BSOD's.

I also get a random BSOD on startup but it has happened so infrequently i have been unable to boot with disable automatic restart on system failure enabled to capture the stop code.

I really could do with some expert advice please.

This is my first post so i apologise if i have missed something important but i have tried to read as much info as possible before posting.

A:BSOD Ntoskrnl.exe+7efc0 and Ntoskrnl.exe+75c40

Unusual one you got there think it may be a windows problem please run sf tool and upload all files not just dumps and try running an sfc scan
SFC /SCANNOW Command - System File Checker option 2

Check system temperatures also

http://www.sevenforums.com/bsod-help-support/281212-bsod-ntoskrnl-exe-7efc0-ntoskrnl-exe-75c40.html
Relevancy 51.6%

i am having this problem after i change my video cards i upgraded a 460 SLI to a 680
i have run 3dmark11 to try to replicate the bsod or something and nothing happends
i clean my hardware and change the thermal compound then i played some bf3 and paff the same bsod =(

pd: sorry for my english
i forgot to say that i have the last beta drivers from nvidia because with the WHQL i was having problems in gw2
Attachment 231326

A:BSOD playing bf3, hal.dll hal.dll+12a3b , ntoskrnl.exe ntoskrnl.exe+18

Welcome

For the bug check you're getting go through:
Stop 0x124 - what it means and what to try

Also get a latest version of your BIOS.


Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Yusra\Downloads\Fayer\SF_11-09-2012\091112-23509-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
Machine Name:
Kernel base = 0xfffff800`03667000 PsLoadedModuleList = 0xfffff800`038ab670
Debug session time: Wed Sep 12 06:29:05.072 2012 (UTC + 6:00)
System Uptime: 0 days 7:04:57.025
Loading Kernel Symbols
...............................................................
................................................................
................................
Loading User Symbols
Loading unloaded module list
.....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 124, {0, fffffa80086cf028, ba000000, 400405}

*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : hardware

Followup: MachineOwner
---------

5: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa80086cf028, Address of the WHEA_ERROR_RECORD structure.
Arg3: 00000000ba000000, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000000400405, Low order 32-bits of the MCi_STATUS value.

Debugging Details:
------------------
BUGCHECK_STR: 0x124_GenuineIntel

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

PROCESS_NAME: System

CURRENT_IRQL: f

STACK_TEXT:
fffff880`030acb58 fffff800`03630a3b : 00000000`00000124 00000000`00000000 fffffa80`086cf028 00000000`ba000000 : nt!KeBugCheckEx
fffff880`030acb60 fffff800`037f3b03 : 00000000`00000001 fffffa80`0860b890 00000000`00000000 fffffa80`0860b8e0 : hal!HalBugCheckSystem+0x1e3
fffff880`030acba0 fffff800`03630700 : 00000000`00000728 fffffa80`0860b890 fffff880`030acf30 fffff880`030acf00 : nt!WheaReportHwError+0x263
fffff880`030acc00 fffff800`03630052 : fffffa80`0860b890 fffff880`030acf30 fffffa80`0860b890 00000000`00000000 : hal!HalpMcaReportError+0x4c
fffff880`030acd50 fffff800`0362ff0d : 00000000`00000008 00000000`00000001 fffff880`030acfb0 00000000`00000000 : hal!HalpMceHandler+0x9e
fffff880`030acd90 fffff800`03623e88 : 0000003b`5e9a7a72 fffffa80`0ae15ac8 00000000`00000000 00000000`00000000 : hal!HalpMceHandlerWithRendezvous+0x55
fffff880`030acdc0 fffff800`036e4aac : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : hal!HalHandleMcheck+0x40
fffff880`030acdf0 fffff800`036e4913 : 00000000`00000000 00000... Read more

http://www.sevenforums.com/bsod-help-support/252352-bsod-playing-bf3-hal-dll-hal-dll-12a3b-ntoskrnl-exe-ntoskrnl-exe-18-a.html
Relevancy 51.6%

Does anyone have any idea what could be causing these BSOD errors? It started with the +74200 error about a month ago (enduser is just now informing IT) and now it is the +73c40. I've already done several Memory tests to no avail. I'm about to just
reimage but don't want to if it's just a driver issue. 

Thanks
TravisD

https://social.technet.microsoft.com/Forums/en-US/afea0b11-7904-4025-8dd6-c76d6cfa02d8/ntoskrnlexe74200-amp-ntoskrnlexe73c40-bsod?forum=w8itprogeneral
Relevancy 51.6%

Hi, I've been having this BSOD appear very randomly.

IRQL_NOT_LESS_OR_EQUAL 0x0000000a
(all reports in .rar file)

Sometimes within 1 hour, other times as long as 24hrs+. I've got my BIOS/Drivers up to date for my CPU, Graphics Card, and Motherboard. I've rigorously tested my memory and have never had any issues arise.

It has occurred during
3d gaming,
when the system has been idle,
also when browsing with firefox or ie.

Any help at all would be appreciated, I've struggled with this BSOD for years I would love to finally find whats causing it.

Thank you.

A:BSOD ntoskrnl.exe+26ee0 ntoskrnl.exe+7cc40

  
Quote: Originally Posted by postal


Hi, I've been having this BSOD appear very randomly.

IRQL_NOT_LESS_OR_EQUAL 0x0000000a
(all reports in .rar file)

Sometimes within 1 hour, other times as long as 24hrs+. I've got my BIOS/Drivers up to date for my CPU, Graphics Card, and Motherboard. I've rigorously tested my memory and have never had any issues arise.

It has occurred during
3d gaming,
when the system has been idle,
also when browsing with firefox or ie.

Any help at all would be appreciated, I've struggled with this BSOD for years I would love to finally find whats causing it.

Thank you.


First lets start with asacpi.sys yours dated 2005
1-ASACPI.SYS

The pre 2009 version of this driver is a known BSOD cause.

Please visit this link: ASUS teK Computer Inc. -Support- Drivers and Download P7P55D LE
ASUSTeK Computer Inc. -Support- Drivers and Download P7P55D LE

Scroll down to the Utilities category, then scroll down to the "ATK0110 driver for WindowsXP/Vista/Windows 7 32&64-bit" (it's about the 12th item down).
Download and install it.
Go to C:\Windows\System32\drivers to check and make sure that the ASACPI.SYS file is date stamped from 2009 or 2010 (NOT 2005).

http://www.sevenforums.com/bsod-help-support/194256-bsod-ntoskrnl-exe-26ee0-ntoskrnl-exe-7cc40.html
Relevancy 45.58%

ntoskrnl.exe+18c453
Funny thing is that i have router and bsod happens parallel(not always) on both computers
///
please help

A:BSOD while browsing/downloading torrents hal.dll+12a3b bsod/ntoskrnl

Hi,
Unfortunately the installation is counterfeit.
The Key is that of a Dell OEM computer - and the motherboard is a retail one by Asus.



The best course of action is to:Purchase a legitimate Windows 7 licence.
Format the HDD.
Reinstall Windows and activate.

http://www.sevenforums.com/bsod-help-support/304027-bsod-while-browsing-downloading-torrents-hal-dll-12a3b-bsod-ntoskrnl.html
Relevancy 45.58%

I keep getting BSODs when I play games for a short while At first I thought when BSOD says ntoskrnl.exe games. BSOD BlueScreenView caused playing it was a bad installation of Windows BSOD when playing games. BlueScreenView says ntoskrnl.exe caused BSOD so I did a clean format full of my SSD and a clean install of Windows Ultimate x Installation failed quite a few times before finally succeeding Tried another copy of Windows same install failures I finally finished reinstalling Windows on my PC I suspected the RAM to be at fault so I ran MemTest and found a ton of errors Upon closer inspection of the BIOS settings I found that my board was clocking my ram in Auto mode at mhz instead of the factory mhz Corsair Vengeance LP DDR CAS on Asus Sabertooth Z I updated my BIOS to the latest as of this posting and I still have to manually set the memory frequencies for it to run at mhz Everything seemed fine for a few hours running prime I supposed my PC was fine now after that clean install of Windows but a few minutes into playing Battlefield I BSOD I am no pro at reading dump files and I was hoping someone could help me isolate the sources of my BSODs I've attached the minidump files for each BSOD below Thanks

A:BSOD when playing games. BlueScreenView says ntoskrnl.exe caused BSOD

My system specs are:

Intel Core i7-3770
Asus Sabertooth Z77
Corsair Vengeance Low Profile DDR3 @1600mhz CAS9
Kingston HyperX 3k 120GB SSD (boot, Battlefield 3, Microsoft Office)
Asus DirectCUII GTX 670
Thermaltake Toughpower 1200 watt
Razer Blackwidow Ultimate
Cyborg RAT7 Mouse

http://www.sevenforums.com/bsod-help-support/240280-bsod-when-playing-games-bluescreenview-says-ntoskrnl-exe-caused-bsod.html
Relevancy 45.15%

Well didn't think i would be having any more issues pc been running fine since i fixed bad memory issues now all of a sudden i start getting this error ntoskrnl.exe+811b3 or that's all i can understand from log please if some 1 could take a look at my logs and help i would appreciate it i have stress tested my pc for a few hours after recovering last time and all seemed fine TIA

A:BSOD related to ntoskrnl.exe+811b3 after recovering from BSOD

Can i ask you to download this, http://go.microsoft.com/fwlink/?linkid=52012

Once downloaded please copy and past the information on here

This will help me analyze your problem further

I look forward to helping you.

http://www.sevenforums.com/bsod-help-support/346328-bsod-related-ntoskrnl-exe-811b3-after-recovering-bsod.html
Relevancy 44.29%

Hello,
first thing: this is not my pc, so I have experienced just 1 of this bsod (chronologically the last one: this pc had 2 cd/dvd reader, 1 working and 1 not working, to do some tests, I disconnected the working one, at first start the broken one has worked but it gave me that BSOD).

Another info: after the 30/11 an external graphic card was installed (don't know which driver/version).

All the older BSOD (before the 21/01/2015) was not caused by me. I ask you, gently, to have a look at this dumps and help me to find the problem/s. Thank you

A:BSOD differents bsod ntoskrnl.exe in many months

Hello,
some days ago a friend took me his pc because he had got many BSOD (I posted yesterday about that with no luck), many of this BSOD are happened after I have installed in that pc an ATI HD 3650 PCI.

First test group on this machine (Acer T650-99TZ):
prime95: rounding was 0.5, expected less than 0.4 (after 2 minutes)
memtest86: many errors whit 2 stick of ram, 0 errors when testing the sticks singularly
Furmark: test passed with no errors (30 minutes)
hdtune: no errors

Second test group on second identical machine (Acer T650-99TZ + hdd, ram and gpu from the first machine)
prime95: rounding was 0.5, expected less than 0.4 (after 2 minutes)
memtest86: many errors whit 2 stick of ram, 0 error when testing the sticks singularly

Third test group on second and first machine (same hw except for the gpu: here I took out the HD 3650 and used the integrated gpu)
prime95: no errors (in 8 hours)
memtest86: no errors (100% passed)


Ram: 2x1gb 1Rx8 PC2-5300U 555-12 hymp112u64cp8-y5
CPU: Pentium 4 524
Obviously no overclock was made on this pc.
Obviously gpu drivers are up-to-date.

Now i'm trying to donwngrade the drivers of the GPU but I think this won't work, since the problem appear to be an incompatibility between the HD 3650 and the other hw.

Can anyone help me to solve this problem? Thanks

http://www.sevenforums.com/bsod-help-support/360195-bsod-differents-bsod-ntoskrnl-exe-many-months.html
Relevancy 44.29%

I have a Dell 1764 laptop, about 2years old, this month, got a new hard-drive with win7 preinstalled about a year and a half ago, from Dell.
Window 7 Home Premium x64.
added files.

A:BSOD, apx. every hour or so i BSOD, svchost/ntoskrnl + others

it will be 2yrs old this month*

http://www.sevenforums.com/bsod-help-support/213216-bsod-apx-every-hour-so-i-bsod-svchost-ntoskrnl-others.html
Relevancy 43.43%

System HP G - x Windows Home Premium OEM bit AMD Athalon II P Dual Core ghz GB Issue Seems to be video driver memory related having a hard time narrowing it down BSOD most often when coming out of sleep mode but also does it when actively using the computer and when just letting it sit with no user input Sometimes does a very interesting tell tale sign The system will just restart with no blue screen when it does sometimes the very first G42 with ntoskrnl.exe HP errors Laptop text windows is loading will show a slight right offset ghosting of the letters in a transparent blue This will follow the machine into a system failed HP G42 Laptop with ntoskrnl.exe errors to start loop with the ghosting of the letters still appearing After not being able to start and going through the process it usually starts up again without issue only to restart or BSOD later in a matter of minutes or could be a day or so later All dump files to date show ntoskrnl exe as a issue as well Problem solving attempted Have done destructive factory restore twice so no malware or virus issues Same issues arrise Did not enable trialware of Norton Have only installed bluescreen viewer fresh diagnose and updates Updated Bios and UEFI system diagnostics from HP website All passed Run Memtest passed Updated AMD M G ATI mobility Radeon HD driver through Device manager with look for updates through Microsoft Checked for South bridge known compatibility issues non found Updated all Microsoft updates searched for ntoskrnl exe issues with windows no related issues found so far Suspect The Processor or if there is onboard video memory in the radeon chipset But can find no real stress test for the processor or video memory only programs that list what hardware is installed As well hair loss could be contributed to by continued hair pulling due to fustration with above issue Zipped dump files are on sky drive http sdrv ms cURU S

A:HP G42 Laptop with ntoskrnl.exe errors

Does anyone have any thoughts on what or how to proceed. Please any suggestions would be helpful to diagnose this issue and figure out how to resolve the problem.

http://www.techsupportforum.com/forums/f217/hp-g42-laptop-with-ntoskrnl-exe-errors-747657.html
Relevancy 43%

Hi guys.
My problem started when I had Windows 8.1 installed. I got several different random BSODs every day.
I think it all started on the day I got my HDD replaced with SSD. But I may be wrong.
I was hoping that updating to Windows 10 will solve that issue but it didn't.

Any help will be appreciated.

A:Several random BSODs on my laptop. ntoskrnl.exe and other

Hi Mariocorn,

I have checked the log files again and see that you're running a counterfeit copy of windows, this is not allowed.

Please create a new thread when you have a legitimate copy of windows.

http://www.eightforums.com/bsod-crashes-debugging/70346-several-random-bsods-my-laptop-ntoskrnl-exe-other.html
Relevancy 43%

Hello. I have an ASUS x552m laptop with Windows 8.1.

Over the past days, it crashes when I try put it into Sleep mode (maybe 1 out of 4 times). The screen turns off, but the little lights under the touchpad stay lit for a few minutes and then the computer shuts down. I get dump files every time and they are referring to ntoskrnl.exe+14e2a0 DRIVER_POWER_STATE_FAILURE.

I've read in the forums that many ASUS laptops have a similar issue. I uninstalled some of the preinstalled ASUS software and downloaded a new NVIDIA graphics driver after I started to get these crashes. I was thinking about restoring the system to the state when the crashes hadn't occurred yet, but I haven't done it yet.

Any help welcome.STEN-E_01_02_2016_154423,71.zip

http://www.eightforums.com/bsod-crashes-debugging/73795-crash-when-trying-put-laptop-sleep-ntoskrnl-exe.html
Relevancy 42.57%

Hello guys I quot ve been getting blue screens for quite a while now and can't seem to figure out what the hell is going on I'm BSOD ntoskrnl.exe thinking its a memory problem but lets see what you guys think If you need any other information let me know On Mon PM GMT your computer crashed crash dump file C Windows Minidump - - dmp This was probably caused by the following module ntoskrnl exe nt x Bugcheck code x E xFFFFFFFFC xFFFFF F B x x E Error KMODE EXCEPTION NOT HANDLED file path BSOD ntoskrnl.exe C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System Bug check description This indicates that a kernel-mode program generated an exception which the error handler did not catch This appears BSOD ntoskrnl.exe to be a typical software driver bug and is not likely to be caused by a hardware problem The crash took place in the Windows kernel Possibly this problem is caused by another driver that cannot be identified at this time

A:BSOD ntoskrnl.exe

Usb 3.0 driver was out of date.

http://www.sevenforums.com/bsod-help-support/303434-bsod-ntoskrnl-exe.html
Relevancy 42.57%

hi bleeping computer, i'm a new member here coz i was so desperate not having my pc fixed from BSOD.
 
it happened after i upgrade from win 7 to win 8, cause i dont have much expertise in this thing, i'm hoping i could get some solution from BC expert
 
looking forward to get some feedback regarding this issue, i'm so grateful found this site after all
 
thanks in advance
 
Ryan

A:various BSOD with ntoskrnl.exe

sorry i forgot to list my pc spec here
mobo : asus m4a89gtd
amd phenom II x6 1055t
apotop 1x4gb RAM
nvidia gforce 8600 gt
 
thanks

http://www.bleepingcomputer.com/forums/t/515865/various-bsod-with-ntoskrnlexe/
Relevancy 42.57%

Hey guys Recently got my new computer and it is amazing Only problem is that or times a day i get a BSOD I checked the Minidump files and it's saying something about VISTA DRIVER FAULT and ntoskrnl exe driver fault This is what the Dump File reads Code Loading Dump File C Users Nico Desktop - - dmp Mini Kernel Dump File Only registers and stack trace are available Symbol search path is Invalid Symbol loading may be unreliable without a symbol search path Use symfix to have the debugger BSOD ntoskrnl.exe? - choose a symbol path After setting your symbol path use reload to refresh symbol locations Executable search path is Symbols can not be loaded because symbol path BSOD - ntoskrnl.exe? is not initialized The Symbol Path can be BSOD - ntoskrnl.exe? set by using the NT SYMBOL PATH environment variable using the -y lt symbol path gt argument when starting the debugger using sympath BSOD - ntoskrnl.exe? and sympath Unable to load image SystemRoot system ntoskrnl exe Win error n WARNING Unable to verify timestamp for ntoskrnl exe ERROR Module load completed but symbols could not be loaded for ntoskrnl exe Windows Kernel Version MP procs Free x Product WinNt suite TerminalServer SingleUserTS Personal Built by amd fre win gdr - Machine Name Kernel base xfffff a e PsLoadedModuleList xfffff c be Debug session time Sat Oct UTC System Uptime days Symbols can not be loaded because symbol path is not initialized The Symbol Path can be set by using the NT SYMBOL PATH environment variable using the -y lt symbol path gt argument when starting the debugger using sympath and sympath Unable to load image SystemRoot system ntoskrnl exe Win error n WARNING Unable to verify timestamp for ntoskrnl exe ERROR Module load completed but symbols could not be loaded for ntoskrnl exe Loading Kernel Symbols Loading User Symbols Loading unloaded module list Bugcheck Analysis Use analyze -v to get detailed debugging information BugCheck A b fffff a ddaa Kernel symbols are WRONG Please fix symbols to do analysis Your debugger is not using the correct symbols In order for this command to work properly your symbol path must point to pdb files that have full type information Certain pdb files such as the public OS symbols do not contain the required information Contact the group that provided you with these symbols if you need this command to work Type referenced nt KPRCB Your debugger is not using the correct symbols In order for this command to work properly your symbol path must point to pdb files that have full type information Certain pdb files such as the public OS symbols do not contain the required information Contact the group that provided you with these symbols if you need this command to work Type referenced nt KPRCB Your debugger is not using the correct symbols In order for this command to work properly your symbol path must point to pdb files that have full type information Certain pdb files such as the public OS symbols do not contain the required information Contact the group that provided you with these symbols if you need this command to work Type referenced nt KPRCB Probably caused by ntoskrnl exe nt fdaa Followup MachineOwner --------- kd gt analyze -v Bugcheck Analysis IRQL NOT LESS OR EQUAL a An attempt was made to access a pageable or completely invalid address at an interrupt request level IRQL that is too high This is usually caused by drivers using improper addresses If a kernel debugger is available get the stack backtrace Arguments Arg b memory referenced Arg IRQL Arg bitfield bit value read operation write operation bit value not an execute operation execute operation only on chips which support this level of status Arg fffff a ddaa address which referenced memory Debugging Details ------------------ Kernel symbols are WRONG Please fix symbols to do analysis Your debugger is not using the correct symbols In order for this command to work properly your symbol path must point to pdb files that have full type information Certain pdb fi... Read more

A:BSOD - ntoskrnl.exe?

ignore the ntoskrnl.exe its most likely a symptom not a cause and concentrate on the irq not less equal interrupt error , 99% of the time this is caused by graphics drivers so start there update to the latest , if you have the latest install the last set , reinstall your chipset drivers (mobo or chipset manufacturer will have them get the latest version not the version you were supplied with) soundcard drivers infact reinstall every driver you can think of .

remove and uninstall any unessasary hardware like printers usb devices etc until you can trace the faulting driver

http://www.sevenforums.com/drivers/115486-bsod-ntoskrnl-exe.html
Relevancy 42.57%

I'm a bit out of my depth on this one. Any help? Followed the BSOD posting guidelines that I found on the site while researching this (with a hiccup).

Something I couldn't figure out happened to the primary hard drive a month or so ago that made everything unreadable (raid 0) so I did a clean install of everything - BSODs started to happen recently, so I figured it was something I had downloaded. Reinstalled Windows again 4 or so days ago and am still getting them. I've only installed video and audio drivers and a few games. BSODs regardless of what I'm doing. In fact, usually not in-game.

? OS - Windows 8.1
? x64
? What was original installed OS on system - Windows 7 (Windows 8.1 was a clean install)
? full retail OS
? PC is 4 years old
? OS has been on here for about 4 days

? CPU - i7 980x
? Video Card - SLI GTX 480
? EVGA FTW 3
? Power Supply brand & wattage 1200W

Desktop

A:NTOSKRNL.exe BSOD

Hi,

We have various bug checks:

DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1) bug check.

This indicates that a kernel-mode driver attempted to access pageable memory at a process IRQL that was too high.

A driver tried to access an address that is pageable (or that is completely invalid) while the IRQL was too high. This bug check is usually caused by drivers that have used improper addresses.

By default, the fault of the crashes is NETIO.sys which is the Network I/O Subsystem.

PAGE_FAULT_IN_NONPAGED_AREA (50)

This indicates that invalid system memory has been referenced.

Bug check 0x50 usually occurs after the installation of faulty hardware or in the event of failure of installed hardware (usually related to defective RAM, be it main memory, L2 RAM cache, or video RAM).

Another common cause is the installation of a faulty system service.

Antivirus software can also trigger this error, as can a corrupted NTFS volume.

WINLOGON_FATAL_ERROR (c000021a)

This means that an error has occurred in a crucial user-mode subsystem.

Okay, so what crashed?

ADDITIONAL_DEBUG_TEXT: initial session process or

Great, so what initial session process or ?? was it?

BugCheck C000021A, {ffffc000bf27f190, ffffffffc0000428, 0, f1c6a90458}


Code:

1: kd> db ffffc000bf27f190
ffffc000`bf27f190 69 6e 69 74 69 61 6c 20-73 65 73 73 69 6f 6e 20 initial session
ffffc000`bf27f1a0 70 72 6f 63 65 73 73 20-6f 72 00 00 77 e7 d0 11 process or..w...
ffffc000`bf27f1b0 03 01 0e 03 57 6d 69 70-00 00 00 00 0a 00 00 00 ....Wmip........
ffffc000`bf27f1c0 00 00 00 00 41 00 43 00-50 00 49 00 5c 00 47 00 ....A.C.P.I.\.G.
ffffc000`bf27f1d0 65 00 6e 00 75 00 69 00-6e 00 65 00 49 00 6e 00 e.n.u.i.n.e.I.n.
ffffc000`bf27f1e0 74 00 65 00 6c 00 5f 00-2d 00 5f 00 49 00 6e 00 t.e.l._.-._.I.n.
ffffc000`bf27f1f0 74 00 65 00 6c 00 36 00-34 00 5f 00 46 00 61 00 t.e.l.6.4._.F.a.
ffffc000`bf27f200 6d 00 69 00 6c 00 79 00-5f 00 36 00 5f 00 4d 00 m.i.l.y._.6._.M.
It looks like the initial session that terminated was ACPI which is the Advanced Configuration and Power Interface. ACPI defines a flexible and abstract hardware interface that provides a standard way to integrate power management features throughout a PC system, including hardware, operating system and application software.

IRQL_NOT_LESS_OR_EQUAL (a)

This indicates that Microsoft Windows or a kernel-mode driver accessed paged memory at DISPATCH_LEVEL or above.

This bug check is issued if paged memory (or invalid memory) is accessed when the IRQL is too high. The error that generates this bug check usually occurs after the installation of a faulty device driver, system service, or BIOS.

--------------------

1. RTCor64.sys is listed and loaded which is RivaTuner/EVGA Precision/MSI Afterburner (known BSOD issues w/Win7 & 8). Please uninstall ASAP!

2. If the above fails, I would go as far to say that we actually have a faulty HDD setup here, or a bad motherboard.

Regards,

Patrick

http://www.techsupportforum.com/forums/f299/ntoskrnl-exe-bsod-839274.html
Relevancy 42.57%

Bought this computer a week ago. But when running some games i get a bluescreen, not all games. Heroes of Newerth works great. But games like Orcs must die crashes after a few min.

What can be wrong? Been reading alot on forums, but so many different answers..
I've attached some minidumps.

Please help :P

A:BSOD! ntoskrnl.exe Help

Hi Hantimilon welcome to SF

Update your Reclusa Keyboard software\driver.
http://www.microsoft.com/hardware/en-us/downloads

Download and install Driver Sweeper

Download the most recent software\driver for your NVIDIA

Uninstall nvidia software\driver,restart in safe mode,run driver sweeper,choose only NVIDIA-Display and clean,restart in normal mode.

Install the new ati software\driver,restart.

Update DirectX

Run http://www.sevenforums.com/tutorials...test-occt.html

Finish with these steps and post back here the results.

http://www.sevenforums.com/bsod-help-support/192442-bsod-ntoskrnl-exe-help.html
Relevancy 42.57%

I looked at my minidumps and all I see are:
hal.dll
ntoskrnl.exe
tcpip.sys
ntoskrnl.exe
..... < dots mean same as above
.....
.....
Unknown_Module_0000...
ntoskrnl.exe
.....
.....
dxgkrnl.sys
ntoskrnl.exe
.....

So...Whats the next step...I see these minidumps, but I don't know what to do now.

A little background information on my problems:
When I boot up my computer in the morning normally it freezes and I have to restart the computer 5 times or so before it stops freezing. Then I get a bsod about 5 minutes after being on the desktop. After a while the BSODs become less frequent and finally stop at the end of the night. Then back to square one in the morning. Can anybody help me out?

A:BSOD ntoskrnl.exe

  
Quote: Originally Posted by Stuntabeck


I looked at my minidumps and all I see are:
hal.dll
ntoskrnl.exe
tcpip.sys
ntoskrnl.exe
..... < dots mean same as above
.....
.....
Unknown_Module_0000...
ntoskrnl.exe
.....
.....
dxgkrnl.sys
ntoskrnl.exe
.....

So...Whats the next step...I see these minidumps, but I don't know what to do now.

A little background information on my problems:
When I boot up my computer in the morning normally it freezes and I have to restart the computer 5 times or so before it stops freezing. Then I get a bsod about 5 minutes after being on the desktop. After a while the BSODs become less frequent and finally stop at the end of the night. Then back to square one in the morning. Can anybody help me out?


You have a few problems that need to be fixed

1-Kaspersky and Norton both are known causes of BSOD's on some systems. I would remove them and replace with Microsoft Security essentials

http://support.kaspersky.com/downloa...vremover10.zip

http://us.norton.com/support/kb/web_...080710133834EN

Virus, Spyware & Malware Protection | Microsoft Security Essentials
2- Some of these (6 of 16) were blamed directly on memory management. Please run these two tests to verify your memory and determmine which driver is causing the problem
****-Memtest.

*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

RAM - Test with Memtest86+

*****-Driver verifier






Quote:
I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.


Driver Verifier - Enable and Disable
3-Several of these crashes were Related to Rt64win7.sys 8101E/8168/8169 NDIS 6.20 64-bit Driver from Realtek Corporation. I would re-install the newest version available.

How To Find Drivers:




Quote:
- search Google for the name of the driver
- compare the Google results with what's installed on your system to figure out which device/program it belongs to
- visi... Read more

http://www.sevenforums.com/bsod-help-support/192438-bsod-ntoskrnl-exe.html
Relevancy 42.57%

I've been getting a BSOD for several months now. In the past it's been so sporadic, so I've never been able to identify specific actions that produce it the most. Based on a message in this forum, I went ahead and installed BlueScreenView and have found that about 80% of these crashes are caused by the ntoskrnl.exe driver. Of those 80% occurrences, 50% are caused by the ntoskrnl.exe+6a626 address.

Most times I'll get the BSOD when coming out of "Stand By" mode. I've also run memtest86+ and it passed all tests. Most of the time I also have an external hard drive connected. I've also run Verifier, but was unable to produce a BSOD.

Can someone could get me to the next sequence of things I should try to diagnose this issue? I appreciate it!
 

https://forums.techguy.org/threads/bsod-ntoskrnl-exe.1018380/
Relevancy 42.57%

I have been receiving BSOD's for a while now. I went ahead and uninstalled Panda Security (one BSOD pointed to it) and all of the files along with it . Ran memtest86 and on the 9th pass it had one error. Does that mean it's a faulty module? Can you guys see if there's anything else I should be doing? I really appreciate the help.


Thanks
Andrew

A:ntoskrnl.exe bsod

Code:
BugCheck 1E, {ffffffffc0000005, fffff80002c83945, 0, ffffffffffffffff}

Probably caused by : ntkrnlmp.exe ( nt!ExpInterlockedPopEntrySListFault16+0 )

Followup: MachineOwner
---------

Code:
BugCheck 1000007E, {ffffffffc0000005, fffff80002c9cf5c, fffff880009a99d8, fffff880009a9230}

Probably caused by : memory_corruption ( nt!MmZeroPageThread+883 )

Followup: MachineOwner
---------

Code:
BugCheck 3B, {c0000005, fffff80002c88dc5, fffff880027fc9e0, 0}

Probably caused by : ntkrnlmp.exe ( nt!ExpInterlockedPopEntrySListFault16+0 )

Followup: MachineOwner
---------
Test your RAM modules for possible errors. How to Test and Diagnose RAM Issues with Memtest86+
Run memtest86+ for at least 8 consecutive passes.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

It it does not show any error, enable Driver Verifier to monitor the drivers. Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.



   Information
Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.



   Warning
Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.



   Tip

If you fail to get on the Desktop because of DV, Boot into Advanced Boot Options > Safe mode. Disable DV there. Now boot normally again, and try following the instruction of enabling DV again.
If you cannot boot in Safe mode too, do a System Restore to a point you made earlier.

Let us know the results, with the subsequent crash dumps, if any.
HP OEM on Asus

http://www.sevenforums.com/bsod-help-support/367488-ntoskrnl-exe-bsod.html
Relevancy 42.57%

Hey guys.. Im new to the forum and am in need of help!

My hardware is brand new, less then 3 weeks old..

I get these blue screen errors once and a while, very very annoying. Im not sure what to think, software issues or could it be my ssd?

Please look, much appreciated.

A:ntoskrnl.exe BSOD.. Happens at least once a day. Please Help!

Any advice? Its happening very frequently now.. Especially while playing League of Legends.

http://www.sevenforums.com/bsod-help-support/226178-ntoskrnl-exe-bsod-happens-least-once-day-please-help.html
Relevancy 42.57%

Hi Guys,

I have had 6 BSOD's over the last two days when I look up screen view the area of the crashes is nearly always. They only really started to occur after I updated to SP1. I updated my drivers 2 days ago and the crashes are less frequent I have attached Blu screen view txt files also. Any help on this would be greatly appreciated.

ntoskrnl.exe+7fd00

Specs
WIN7 X 64
AMD Phenom ii x 4 840 3.2ghz.
4gb Kingston blu ram 1600mhz (2x2gb)
1.5 tb HDD
OEM OS with SP1 updated.

A:BSOD's in ntoskrnl

There's several possibilities here, but I notice you have avg I have seen similar behavior from avg after installing SP1 before.
If it is the cause simply removing it, and reinstalling it fresh should fix it.


Code:
Probably caused by : NETIO.SYS ( NETIO!NsiEnumerateObjectsAllParametersEx+24f )

Followup: MachineOwner
---------

2: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arguments:
Arg1: fffff88008de84f0, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, value 0 = read operation, 1 = write operation
Arg4: fffff880016771af, address which referenced memory

Debugging Details:
------------------
WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff80002abb100
fffff88008de84f0

CURRENT_IRQL: 2

FAULTING_IP:
ndis!ndisReferenceTopMiniportByNameForNsi+ef
fffff880`016771af 88842490000000 mov byte ptr [rsp+90h],al

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

BUGCHECK_STR: 0xD1

PROCESS_NAME: svchost.exe

TRAP_FRAME: fffff88008de72d0 -- (.trap 0xfffff88008de72d0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000002 rbx=0000000000000000 rcx=fffffa8004d86198
rdx=0000000000000002 rsi=0000000000000000 rdi=0000000000000000
rip=fffff880016771af rsp=fffff88008de7460 rbp=0000000000000002
r8=0000000000000000 r9=0000000000000000 r10=0000000000000000
r11=0000000000000002 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei ng nz na po nc
ndis!ndisReferenceTopMiniportByNameForNsi+0xef:
fffff880`016771af 88842490000000 mov byte ptr [rsp+90h],al ss:0018:fffff880`08de74f0=02
Resetting default scope

LAST_CONTROL_TRANSFER: from fffff8000288b2a9 to fffff8000288bd00

STACK_TEXT:
fffff880`08de7188 fffff800`0288b2a9 : 00000000`0000000a fffff880`08de84f0 00000000`00000002 00000000`00000001 : nt!KeBugCheckEx
fffff880`08de7190 fffff800`02889f20 : 00000000`00000001 00000000`00000000 fffff8a0`018c5060 fffffa80`04d0d1a0 : nt!KiBugCheckDispatch+0x69
fffff880`08de72d0 fffff880`016771af : fffffa80`04d86198 fffff800`028a6a62 00000000`80200020 00000000`00000001 : nt!KiPageFault+0x260
fffff880`08de7460 fffff880`01678c17 : fffffa80`044603b8 00000000`00000000 00000000`00000002 fffffa80`04460100 : ndis!ndisReferenceTopMiniportByNameForNsi+0xef
fffff880`08de74e0 fffff880`01767aab : 00000000`00000000 fffffa80`00000008 00000000`00000290 fffffa80`00000238 : ndis!ndisNsiEnumerateAllInterfaceInformation+0x1e8
fffff880`08de75d0 fffff880`04a9de29 : fffffa80`04460000 fffff8a0`00000070 fffffa80`04a0cfb0 00000000`01b0f550 : NETIO!NsiEnumerateObjectsAllParametersEx+0x24f
fffff880`08de77b0 fffff880`04a9f8e8 : fffffa80`04a0cfb0 fffffa80`04a0cee0 00000000`00000003 fffffa80`04a0cf18 : nsiproxy!NsippEnumerateObjectsAllParameters+0x305
fffff880`08de79a0 fffff880`04a9f9db : fffffa80`04d80bc0 00000000`00000000 00000000`00000001 00000000`00000003 : nsiproxy!NsippDispatchDeviceControl+0x70
fffff880`08de79e0 fffff800`02ba6127 : fffffa80`06639320 fffffa80`06639320 fffffa80`04a0cff8 fffffa80`04a0cee0 : nsiproxy!NsippDispatch+0x4b
fffff880`08de7a10 fffff800`02ba6986 : 00000000`01b0f3d0 00000000`0000059c 00000000`00000000 00000000`00000000 : nt!IopXxxControlFile+0x607
fffff880`08de7b40 fffff800`0288af93 : fffffa80`05de9060 00000000`01b0f3b8 fffff88... Read more

http://www.sevenforums.com/bsod-help-support/179372-bsods-ntoskrnl.html
Relevancy 42.57%

Hi All I've been having lots of BSOD's after installing some new drivers on my Windows x system I have re-installed Windows almost times now and i honestly do not understand what the problem is The BSOD's started when I installed some new drivers for my MoBo and SSD drives so I thought I would just do a clean install with all the lates drivers and everything would be OK Well it others and ntoskrnl BSOD hasn't been No matter what I do after the installation of Windows it keeps giving all kids BSOD ntoskrnl and others of BSoD's I have tried installing with all of the latest drivers I could find from the various hardware manufacturers and I have also tried installing with just the latest drivers from my notebook supplier it's a Clevo variant from The Netherlands called BTO But the Blue Screens don't stop I have run Memtest overnight with no errors I have run Prime Small FFT's all day in Safe Mode and all appears to be well But just using the computer to browse etc it can crash at any time I hope the experts here can help me If any information is lacking please ask me BR Elwin

A:BSOD ntoskrnl and others

Notebook: 17" BTO 17CL37 (Clevo variant)
Board: Intel HM67
CPU: Intel Core i7 2920XM
RAM: 2 x OCZ 4GB 1333Mhz
SSD: 2 x Intel 510 Series 250GB in RAID 0
Graphics: Nvidia GeForce 460GTX M

http://www.techsupportforum.com/forums/f299/bsod-ntoskrnl-and-others-670213.html
Relevancy 42.57%

I've been reading most all of the messages on this board but I have not been able to find a solution to my BSOD. The lockups are very random and unexpected and I've probed the temps and voltage and things seem to be in tolerance. I was wonder if someone can read my miniDumps to see what might be the problem.
 

A:BSOD ntoskrnl.exe

Go here and follow the instructions on testing your memory and hard drive for errors:
http://www.techspot.com/vb/topic51365.html

...are you over-clocking? All the minidumps are the same:
DRIVER_IRQL_NOT_LESS_OR_EQUAL
ntoskrnl.exe
 

http://www.techspot.com/community/topics/bsod-ntoskrnl-exe.177705/
Relevancy 42.57%

I have experienced 2 BSODs about a week apart. Any help would be appreciated. Please let me know if anthing else is required. Thanks.

A:ntoskrnl.exe BSOD

Which version of the P6T board do you have? I had a P6T Deluxe v1 and had to upgrade to v2 in order to stop my BSOD's when I hibernated.

The first thing to do is to reset the system to factory defaults (no overclock). This will tell us if it's due to the overclock or not. The memory dumps show default as 2.67 gHz and current as 3.1 gHz.

Beyond that there's no specific cause to suspect here. The BSOD's blame memory corruption - which can be due to the overclock or to faulty drivers. Let us know if resetting the system to default fixes things. If not, then start with these free diagnostics:





Quote:
I suggest starting all troubleshooting with the following diagnostic tests. They'll save you a lot of time and heartache if there is a hardware failure, and you'll have the disks on hand in case you need them in the future:





Quote:
H/W Diagnostics:
Please start by running these bootable hardware diagnostics:
Memory Diagnostics (read the details at the link)
HD Diagnostic (read the details at the link) - Test ALL of the hard drives.

Also, please run one of these free, independent online malware scans to ensure that your current protection hasn't been compromised: Free Online AntiMalware Resources (read the details at the link)





BSOD BUGCHECK SUMMARY

Code:

Loading Dump File [C:\Users\FUBAR\_jcgriff2_\dbug\__Kernel__\080111-28844-01.dmp]
Built by: 7601.17592.amd64fre.win7sp1_gdr.110408-1631
Debug session time: Mon Aug 1 02:01:36.662 2011 (UTC - 4:00)
System Uptime: 0 days 10:23:04.630
Probably caused by : memory_corruption ( nt!MiTrimWorkingSet+c0 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x50
PROCESS_NAME: CCC.exe
FAILURE_BUCKET_ID: X64_0x50_nt!MiTrimWorkingSet+c0
Bugcheck code 00000050
Arguments fffff683`fb7ca888 00000000`00000000 fffff800`02f50bc0 00000000`00000002
BiosVersion = 0904
BiosReleaseDate = 11/12/2009
CPUID: "Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz"
MaxSpeed: 2670
CurrentSpeed: 3100
??????????????????????????????????????????????????????????????????????????????????????``
Loading Dump File [C:\Users\FUBAR\_jcgriff2_\dbug\__Kernel__\072411-24414-01.dmp]
Built by: 7601.17592.amd64fre.win7sp1_gdr.110408-1631
Debug session time: Sun Jul 24 14:30:19.632 2011 (UTC - 4:00)
System Uptime: 0 days 0:10:01.600
Probably caused by : memory_corruption ( nt!MiAgeWorkingSet+1d1 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x50
PROCESS_NAME: iexplore.exe
FAILURE_BUCKET_ID: X64_0x50_nt!MiAgeWorkingSet+1d1
Bugcheck code 00000050
Arguments fffff683`fb7f46b8 00000000`00000000 fffff800`02e8231b 00000000`00000002
BiosVersion = 0904
BiosReleaseDate = 11/12/2009
CPUID: "Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz"
MaxSpeed: 2670
CurrentSpeed: 3100
??????????????????????????????????????????????????????????????????????????????????????``

http://www.sevenforums.com/bsod-help-support/178397-ntoskrnl-exe-bsod.html
Relevancy 42.57%

I've been having random BSODs that seem to have started a few weeks ago when I encrypted my wireless router. Attached are my mini dump files but the most common problem seems to be with ntoskrnl.exe and nwifi.sys. I haven't installed any new hardware or software and all my drivers are updated. I've run Avast and malwarerbytes insafe mode and nothing has turned up. My Interenet connection has slowed to a crawl and it disconnects occassionally. I'm usng Windows 7. Any ideas how to fix this?

A:BSOD w/ntoskrnl.exe

Hi -

Your wifi USB driver is the probable cause on all dumps -

Code:
athrxusb.sys Tue Jul 29 08:47:13 2008 (488F1151)

http://www.sysnative.com/drivers/driver.php?id=athrxusb.sys

It's a driver written by Atheros; not usually easy to find an update for.

It is way too old for a fully updated 2012 Windows 7 SP1 system.

Regards. . .

jcgriff2

`

BSOD SUMMARY


Code:

Debug session time: Tue Oct 2 19:25:51.415 2012 (GMT-4)
Loading Dump File [C:\Users\PalmDesert\SysnativeBSODApps\100212-13509-01.dmp]
Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
System Uptime: 0 days 0:55:32.039
BugCheck 1E, {0, 0, 0, 0}
*** WARNING: Unable to verify timestamp for athrxusb.sys
*** ERROR: Module load completed but symbols could not be loaded for athrxusb.sys
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : nwifi.sys ( nwifi!Pt6RepackRecvNBL+103 )
Bugcheck code 0000001E
Arguments 00000000`00000000, The exception code that was not handled 00000000`00000000, The address that the exception occurred at 00000000`00000000, Parameter 0 of the exception 00000000`00000000, Parameter 1 of the exception
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x1E
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0x1E_nwifi!Pt6RepackRecvNBL+103
BiosVersion = A06
BiosReleaseDate = 12/01/2010
SystemManufacturer = Dell Inc.
SystemProductName = Inspiron 560
??????????????????????????????????????????????????????????????????????????????????????``
Debug session time: Tue Oct 2 18:29:26.613 2012 (GMT-4)
Loading Dump File [C:\Users\PalmDesert\SysnativeBSODApps\100212-13447-01.dmp]
Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
System Uptime: 0 days 3:24:36.236
BugCheck 1E, {ffffffffc0000005, fffff88005cd7370, 0, 0}
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : NETIO.SYS ( NETIO!NetioAllocateAndReferenceCloneNetBufferList+32 )
Bugcheck code 0000001E
Arguments ffffffff`c0000005, The exception code that was not handled fffff880`05cd7370, The address that the exception occurred at 00000000`00000000, Parameter 0 of the exception 00000000`00000000, Parameter 1 of the exception
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x1E
PROCESS_NAME: svchost.exe
FAILURE_BUCKET_ID: X64_0x1E_NETIO!NetioAllocateAndReferenceCloneNetBufferList+32
BiosVersion = A06
BiosReleaseDate = 12/01/2010
SystemManufacturer = Dell Inc.
SystemProductName = Inspiron 560
??????????????????????????????????????????????????????????????????????????????????????``
Debug session time: Tue Oct 2 14:44:15.141 2012 (GMT-4)
Loading Dump File [C:\Users\PalmDesert\SysnativeBSODApps\100212-13774-01.dmp]
Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
System Uptime: 0 days 6:50:38.764
BugCheck C2, {99, fffffa800479a010, 0, 0}
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : afd.sys ( afd!AfdFreeConnectionEx+72 )
Bugcheck code 000000c2
Arguments 00000000`00000099, Attempt to free pool with invalid address (or corruption in pool header) fffffa80`0479a010, Address being freed 00000000`00000000, 0 00000000`00000000, 0
BUGCHECK_STR: 0xc2_99
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0xc2_99_afd!AfdFreeConnectionEx+72
BiosVersion = A06
BiosReleaseDate = 12/01/2010
SystemManufacturer = Dell Inc.
SystemProductName = Inspiron 560
??????????????????????????????????????????????????????????????????????????????????????``
Debug session time: Mon Oct 1 21:40:33.606 2012 (GMT-4)
Loading Dump File [C:\Users\PalmDesert\SysnativeBSODApps\100112-13993-01.dmp]
Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
System Upt... Read more

http://www.techsupportforum.com/forums/f299/bsod-w-ntoskrnl-exe-669653.html
Relevancy 42.57%

Please help ump File - - dmp Crash Time PM Bug Check String IRQL NOT LESS OR EQUAL Bug Check Code x a Parameter fffffa c cd aa Parameter Parameter Parameter fffff f Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe efc File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win sp gdr - Processor x Crash Address ntoskrnl exe ntoskrnl.exe - Bsod efc Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time AM Bug Check String SYSTEM SERVICE EXCEPTION Bug Check Code x b Parameter c Parameter fffff b f Parameter fffff cbf Parameter Caused By Driver hal dll Caused By Address hal dll ce File Description Product Name Company File Version Processor x Crash Address ntoskrnl exe efc Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Bsod - ntoskrnl.exe Size Dump File - - dmp Crash Time AM Bug Check String IRQL NOT LESS OR EQUAL Bug Check Code x a Parameter Parameter Parameter Parameter fffff f a Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe efc File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win sp gdr - Processor x Crash Address ntoskrnl exe efc Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Bsod - ntoskrnl.exe nbsp

https://forums.techguy.org/threads/bsod-ntoskrnl-exe.1075182/
Relevancy 42.57%

my pc has been blue screening since i built in august please help

? OS - windows 8
? 64 bit
? What was original installed OS on system? built my pc, started with windows 7
? full retailer version
? Age of system- 6 months now
? Age of OS installation - have you re-installed the OS? os, 5 months, and yes multiple times

? CPU i5 4670k
? Video Card msi gtx 650 ti boost
=? Power Supply - brand & wattage corsair 650 watt

? desktop

A:NTOSKRNL.exe BSOD?

Hi,

Can you please re-check http://www.techsupportforum.com/foru...ta-452654.html and follow the BSOD collection part?

Regards,

Patrick

http://www.techsupportforum.com/forums/f299/ntoskrnl-exe-bsod-792562.html
Relevancy 42.57%

Hi 
I need help with this.
The information is in the attached files.

http://www.bleepingcomputer.com/forums/t/612355/bsod-ntoskrnlexe/
Relevancy 42.57%

Hi i have a problem with my computer that i cannot solve on my own. it started way back when i formattet it because it was getting stuffed with all kind of things, i read a little around and found out that i could read these minidumps with a program called bluescreenview, i did. i found out that the problem was ntoskrnl.exe that caused it but sometimes with other drivers, but almost all of the minidumps it seems that its caused by ntoskrnl.exe, but i cant figure this out so asking somebody to help me with this

My specs are following

Cpu: Intel core i7 920 default clock
Motherboard: Asus x58 p6t
Ram: 3 2gb ocz platinium
Gpu: Asus EAH5850 Directcu
HDD: WDD 500 gb and a 200 gb
and edimax wifi card

And i could keep uploading minidumps like these please response asap

A:Ntoskrnl.exe bsod

  
Quote: Originally Posted by Darksoil


Hi i have a problem with my computer that i cannot solve on my own. it started way back when i formattet it because it was getting stuffed with all kind of things, i read a little around and found out that i could read these minidumps with a program called bluescreenview, i did. i found out that the problem was ntoskrnl.exe that caused it but sometimes with other drivers, but almost all of the minidumps it seems that its caused by ntoskrnl.exe, but i cant figure this out so asking somebody to help me with this

My specs are following

Cpu: Intel core i7 920 default clock
Motherboard: Asus x58 p6t
Ram: 3 2gb ocz platinium
Gpu: Asus EAH5850 Directcu
HDD: WDD 500 gb and a 200 gb
and edimax wifi card

And i could keep uploading minidumps like these please response asap


Memory corruption probably caused by a driver. please run these two tests

1-Memtest. Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program.

Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

2-Driver verifier






Quote:
I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.

http://www.sevenforums.com/bsod-help-support/179162-ntoskrnl-exe-bsod.html
Relevancy 42.57%

Hi,
For some time I've been having problems with BSOD's from time to time. It appeared once a week or so what was quite acceptable. Unfortunately nowadays I bought myself a new SSD drive, reinstalled Win7 and since that blue screens seem to happen more and more often. I've updated system files using windows update, updated drivers using Slim Drivers, updated BIOS, run memtest without an error, all with no result.

All the BS's are connected with ntoskrnl.exe.

OS - Windows 7 x64 box reinstalled this week
age of hardware: from about 5 years (cpu) to quite new (SSD)

desktop
pentium dual core 2.0 @ 2.9 (overclocked 99% of life)
MSI g41M
4 GB Ram DDR3
Sapphire Radeon 5670
SSD Adata 128 GB
Seagate USB 2.0 160 GB HDD
Modecom 350W

Help will be really appreciated.

A:BSOD (ntoskrnl) - please help

Hi,

I'm not even going to bother to look at the dumps until you do two things (and this is not because I am being rude or lazy, but because it's essentially worthless to do so for these two reasons):


Quote:




pentium dual core 2.0 @ 2.9 (overclocked 99% of life)




^^ Set the system to defaults for now and for troubleshooting purposes. If your overclock was not a contribution to the crashes, you can put it right back at the end. As of right now though, an overclock is quite a possibility. Also, you've had it for 5 yrs and it's been overclocked for almost all of that time, very likely on its way out which we'll find out after a CMOS clear for defaults.


Quote:




I bought myself a new SSD drive




Update the firmware of the SSD to the latest version if not already.

If you still crash after both of the above, especially #1, we'll get to work.

Regards,

Patrick

http://www.techsupportforum.com/forums/f299/bsod-ntoskrnl-please-help-806001.html
Relevancy 42.57%

Hi, we have problem on 2 hp all in one 400g2. win 10 64, 8gb ram, i5 6500t. 
I attached here report from cmd and report from sysnativefilecollection. 
I hope you will help me. 
BR,
Cesnek

http://www.bleepingcomputer.com/forums/t/627557/bsod-ntoskrnlexe/
Relevancy 42.57%

Hello Windows Ultimate x Retail Custom built in ' Moderate knowledge of technology mainly hardware I get technical BSOD's as I get minidumps but really my computer 'jolts' horizontal red and blue and white and black lines and then restarts This has been happening for a while and this is what I Ntoskrnl.exe BSOD have done thus far MemTest chkdsk f r I believe the f Ntoskrnl.exe BSOD is useless in that command but I use it anyway Replaced the mobo cpu gpu and psu BlueScreenView keeps telling me the main fault is ntoskrnl exe and I have also performed 'sfc scannow' with the result of quot found an error but can't correct it quot I'm not even going to bother submit any of my opinions on what it is or could be because I have tried everything to the best of my knowledge But I will let you know that it starts out one crash a day then a day then an hour If you would like updated minidumps they can be found Here The current set is in the attachments Any help would be very appreciated Thank you -Scott

A:Ntoskrnl.exe BSOD

What are the results of MemTest 86+? Any errors? You should do at least 7 passes





Quote:
'sfc /scannow' with the result of "found an error but can't correct it"


This suggest system corruption, do a Repair Install

http://www.sevenforums.com/bsod-help-support/175968-ntoskrnl-exe-bsod.html
Relevancy 42.57%

Hello everyone. I'm new to the forums, looking to see if anyone can assist me with my BSOD problem.

I'm enclosing a zip file with everything I grabbed using the SF diagnostic tool.
If there's any information I can give you to help with the situation, i'll do my best.
Thank you all!

A:Another BSOD ntoskrnl.exe

I had another bsod just moments ago. Enclosed is the updated dump

Thanks again!

http://www.sevenforums.com/bsod-help-support/303448-another-bsod-ntoskrnl-exe.html
Relevancy 42.57%

Need help on this BSOD I got while trying to stress test my pc

A:BSOD ntoskrnl.exe

Code:
BugCheck 124, {0, fffffa800e8578f8, 0, 0}

Probably caused by : GenuineIntel

Followup: MachineOwner
---------
Which stress test you were running? Prime95?

Run it again. Hardware - Stress Test With Prime95
It saves the result as a .txt file in the prime95's folder. Upload the file for us.

Also, is the computer running hot? Report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy. Alternatively, you can publish a Speccy snapshot too: Speccy - Publish Snapshot of your System Specs .

http://www.sevenforums.com/bsod-help-support/373991-bsod-ntoskrnl-exe.html
Relevancy 42.57%

I have been BSoD ntoskrnl getting multiple BSoD on windows since the released BSoD ntoskrnl version came out had little to no issue with tech previews Here are BSoD ntoskrnl the steps I did to try and solve my issues sfc scannow dism dism online cleanup-image restorehealth updated drivers manually memtest tried one stick of memory at a time in different ports ran Driver Verifier contacted microsoft o help from them now here's what pisses me off reinstalled windows wiped hard drive started from scratch and I am still getting the errors at this point I have no clue what's wrong any thoughts Edit forgot to add this info Is the OS is full retail version Approximate age of system hardware everything is custom built I'd say the oldest parts are up to years newest a year Approximate age of OS installation if you know Have you re-installed the OS yes CPU fx Video Card r MotherBoard if NOT a laptop ASrock performance Power Supply - brand amp wattage if NOT a laptop corsair GS Laptop or Desktop desktop

http://www.techsupportforum.com/forums/f299/bsod-ntoskrnl-1044305.html
Relevancy 42.57%

I've seen so many post about this quot ntoskrnl exe quot causing blue screen of death on Windows but none of these have the same problem as I do So I will try to best explain my issue My BSOD happens whenever I play long periods of time - World of Tanks It happens at random most during actual play in battle not while I am in the main screen or lobby of the game just during battles Some times the game it's will crash or the whole computer will crash with the BSOD I've checked the dump crash files using a BlueScreenOfDeath software They all point to quot ntoskrnl exe quot but once in awhile there will be a quot tcpip sys quot along with the quot ntoskml exe quot PAGE FAULT IN NONPAGED AREA KMODE EXCEPTION NOT HANDLE UNEXPECTED KERNAL MODE TRAP SYSTEM SERVICE EXCEPTION DRIVER CORRUPTED XPOOL IRQL NOT LESS OR EQUAL lt --- most frequent I've tried all the test out there about my Hard with BSOD ntoskrnl.exe help Drive Diag and my Memory Diag and they all come back clear as a whistle BSOD help with ntoskrnl.exe I will attach acouple of my crash dump report for review Any help would be greatly BSOD help with ntoskrnl.exe appreciated Gigabyte GA-MA GM-S H rev AMD Phenom II x Gzh True Quad Core Cache Thermaltake TR -R CPU Cooler Patriot Viper Series DDR PC Mzh Western Digital Caviar SE SATA Western Digital Green SATA Gb TB Samsung DVD Writer SH-S SATA CoolMax CU Modular Power Supply W EVGA Nvidia GeForce GTX Ti Windows Professional bit

A:BSOD help with ntoskrnl.exe

Additional information is required.

1. Download this .BAT file to your desktop

2. Right-click the .BAT file and 'Run as Administrator'
3. Locate the .ZIP file created on your desktop, and upload it here in your next reply.

http://www.sevenforums.com/bsod-help-support/320336-bsod-help-ntoskrnl-exe.html
Relevancy 42.57%

This is a machine that I built a year ago or so. Over the last 2 months, I have been getting occasional bsod and can't seem to fix the problem. They usually happen when the computer is at rest, meaning it has been idle for a while or is just playing music. When I'm gaming, or other cpu intensive tasks it never seems to crash...

I've run Memtest+ and Driver Verifier with no errors. Any help would be appreciated. Thanks.

Specs:
OS: Windows 7 Home Premium x64 SP1
CPU: Intel Core i5 2.8GHz
MOBO: Asus P7P55D-E Pro
RAM: 8GB Corsair XMS3
SOUND: Creative SB X-Fi
DISPLAY: Samsung Syncmaster 1920x1080

A:BSOD ntoskrnl.exe

I would appreciate some assistance if anyone could take a look at the dump files for me. Thanks.

http://www.sevenforums.com/bsod-help-support/179251-bsod-ntoskrnl-exe.html
Relevancy 42.57%

This has happened several times on Win7 Pro. Notice that I am running two machines and the other ntoskrnl.exe file is dated in May while the machine in trouble is dated in March. I have attached several files.

A:BSOD ntoskrnl.exe

Hello cyclone3211.

A stop 0x9F caused by the realtek network driver is rare. Please let me understand one thing? Your onboard connection is Marvell Yukon, and you are using Realtek? Is it a card?

Anyway, the driver is kinda backdated.

Code:
fffff880`0547e000 fffff880`05545000 Rt64win7 T (no symbols)
Loaded symbol image file: Rt64win7.sys
Image path: Rt64win7.sys
Image name: Rt64win7.sys
Timestamp: Wed Dec 26 22:47:50 2012 (50DB313E)
CheckSum: 000CDEEE
ImageSize: 000C7000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Update it from Realtek

Also, uninstall SeriousBit NetBalancer Internet traffic control (nbdrv.sys) and Networx, at least as a try.

Moreover, it appears to be a desktop computer. So you can disable Sleep and hibernate. It will also help you to get rid of your issue.

Let us know the results.
_________________________________________________________________________
BSOD ANALYSIS:

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa8007ae4a10, fffff80000b9c518, fffffa800ccebcf0}

*** WARNING: Unable to verify timestamp for Rt64win7.sys
*** ERROR: Module load completed but symbols could not be loaded for Rt64win7.sys
Probably caused by : Rt64win7.sys

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

DRIVER_POWER_STATE_FAILURE (9f)
A driver has failed to complete a power IRP within a specific time (usually 10 minutes).
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: fffffa8007ae4a10, Physical Device Object of the stack
Arg3: fffff80000b9c518, nt!TRIAGE_9F_POWER on Win7, otherwise the Functional Device Object of the stack
Arg4: fffffa800ccebcf0, The blocked IRP

Debugging Details:
------------------
DRVPOWERSTATE_SUBCODE: 3

DEVICE_OBJECT: fffffa800869b050

DRIVER_OBJECT: fffffa800869f800

IMAGE_NAME: Rt64win7.sys

DEBUG_FLR_IMAGE_TIMESTAMP: 50db313e

MODULE_NAME: Rt64win7

FAULTING_MODULE: fffff8800547e000 Rt64win7

IRP_ADDRESS: fffffa800ccebcf0

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

BUGCHECK_STR: 0x9F

PROCESS_NAME: System

CURRENT_IRQL: 2

TAG_NOT_DEFINED_c000000f: FFFFF80000BA2FB0

STACK_TEXT:
fffff800`00b9c4c8 fffff800`0494d8c2 : 00000000`0000009f 00000000`00000003 fffffa80`07ae4a10 fffff800`00b9c518 : nt!KeBugCheckEx
fffff800`00b9c4d0 fffff800`048e884c : fffff800`00b9c600 fffff800`00b9c600 00000000`00000000 00000000`00000001 : nt! ?? ::FNODOBFM::`string'+0x33af0
fffff800`00b9c570 fffff800`048e86e6 : fffff800`04a8df20 00000000`000683b2 00000000`00000000 00000000`00000000 : nt!KiProcessTimerDpcTable+0x6c
fffff800`00b9c5e0 fffff800`048e85ce : 0000000f`88187094 fffff800`00b9cc58 00000000`000683b2 fffff800`04a5c8c8 : nt!KiProcessExpiredTimerList+0xc6
fffff800`00b9cc30 fffff800`048e83b7 : 00000004`ddd28fc1 00000004`000683b2 00000004`ddd28f17 00000000`000000b2 : nt!KiTimerExpiration+0x1be
fffff800`00b9ccd0 fffff800`048d590a : fffff800`04a58e80 fffff800`04a66cc0 00000000`00000002 fffff880`00000000 : nt!KiRetireDpcList+0x277
fffff800`00b9cd80 00000000`00000000 : fffff800`00b9d000 fffff800`00b97000 fffff800`00b9... Read more

http://www.sevenforums.com/bsod-help-support/299413-bsod-ntoskrnl-exe.html
Relevancy 42.57%

Okay so I've read around on other BSOD threads regarding this problem, tried fixes and had no luck.

I'm usually pretty good at solving problems and I thought I had narrowed it down to my SSD. I replaced my SSD with a regular HDD, formatted and the problem still happens. It's totally random too, not specifically when I'm playing a game/doing intense work. It seems to be getting more and more frequent.

thanks in advance.

my setup:

Gigabyte Z68AP-D3
Intel i5 2500k
Corsair 8GB
Nvidia GeForce 560Ti 448 Core Edition
Corsair TX850W Power Supply
Windows 7 Professional 64bit (newly re-installed)
Seagate 1TB 7200rpm (new)
Samsung 1TB 7200rpm (old)

All my parts are roughly 6-8month old, apart from one of my other HDD's,. which is roughly 1.5 years old.

Relevancy 42.57%

I've suddenly suffered a spate of BSODs. I've never experienced a BSOD on this machine (up to this point) and haven't installed anything lately (hardware or software...to my knowledge).

System specs:
- Windows 7
- x64
- Original OS install
- OEM version that I purchased retail
- 2 year old hardware
- 2 year old OS install
- Intel Core i7 CPU 950 @ 3.07Ghz
- NVIDIA Quadro FX 1800
- ASUS P6X58D ATX Motherboard
- Corsair CMPSU-750TX 750-Watt TX Series 80 Power Supply
- Homebrew system

I've tried to diagnose the problem on my own. Memtest didn't reveal any issues. CPU temps are nominal. The minidump points to NTOSKRNL.exe but I realize that's a common default label.

Windows7_Vista_jcgriff2 and Performance check results are attached.

THANK YOU in advance for helping me resolve this problem.

A:BSOD -> NTOSKRNL.exe -> ???

ASACPI.sys Sun Mar 27 22:30:36 2005
Asus ATK0110 ACPI Utility (a known BSOD maker in Win7). Also a part of the Asus PCProbe and AISuite Utilities.

From 2005 it's a XP driver D/L the 2010 version of Asus AI suite listed under Utilities here> ASUSTeK Computer Inc. -Support- Drivers and Download P6X58D Premium

RimSerial_AMD64.sys Mon Nov 24 12:01:01 2008 is a Blackbery device Virtual Serial Port driver Check for a update with Blackberry > Research In Motion - Products

aw_host5.sys Mon Feb 19 05:35:33 2007 (45D97D75)
awechodd.dll Mon Feb 26 10:09:40 2007 (45E2F834)
awechomd.sys Mon Feb 19 05:35:10 2007 (45D97D5E)
Symantec pcAnywhere Host driver again pre 2008 means they are not Win7 drivers.> http://us.norton.com/support/dtree.jsp

dfmirage.sys Fri Jan 11 16:04:26 2008
DemoForge Mirage Driver (DFMirage video hook driver)

The actual dumps themselves don't tell us a lot as they are all different processes named, usually this means there is a rouge driver in the system overwriting it's own address space into another drivers space which is then calling for the stop or hardware causing corruption, try updating the drivers above is still no good we can try running driver verifier.

BSOD BUGCHECK SUMMARY


Code:

Debug session time: Sun Sep 16 19:04:46.570 2012 (UTC - 4:00)
Loading Dump File [C:\Users\Owner\Bsodapps\091612-17362-01.dmp]
System Uptime: 0 days 2:16:56.600
BugCheck 50, {fffffa8061bc376b, 0, fffff80002cc7d7f, 5}
Probably caused by : memory_corruption ( nt!MiAgeWorkingSet+425 )
Bugcheck code 00000050
Arguments fffffa80`61bc376b 00000000`00000000 fffff800`02cc7d7f 00000000`00000005
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x50
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0x50_nt!MiAgeWorkingSet+425
MaxSpeed: 3070
CurrentSpeed: 3073
BiosVersion = 0703
BiosReleaseDate = 02/24/2010
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
??????????????????????????????????????????????????????????????????????????????????????``
Debug session time: Sun Sep 16 16:46:46.148 2012 (UTC - 4:00)
Loading Dump File [C:\Users\Owner\Bsodapps\091612-15880-01.dmp]
System Uptime: 0 days 1:06:38.178
BugCheck A, {800000028, 2, 1, fffff80002c9757d}
Probably caused by : win32k.sys ( win32k!SetWakeBit+f8 )
Bugcheck code 0000000A
Arguments 00000008`00000028 00000000`00000002 00000000`00000001 fffff800`02c9757d
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0xA
PROCESS_NAME: ActSage.exe
FAILURE_BUCKET_ID: X64_0xA_win32k!SetWakeBit+f8
MaxSpeed: 3070
CurrentSpeed: 3073
BiosVersion = 0703
BiosReleaseDate = 02/24/2010
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
??????????????????????????????????????????????????????????????????????????????????????``
Debug session time: Fri Sep 14 18:13:18.607 2012 (UTC - 4:00)
Loading Dump File [C:\Users\Owner\Bsodapps\091412-16161-01.dmp]
System Uptime: 0 days 11:31:46.638
BugCheck 50, {fffff890033bf110, 0, fffff880016cf527, 5}
Probably caused by : Ntfs.sys ( Ntfs!NtfsFindPrefixHashEntry+1fe )
Bugcheck code 00000050
Arguments fffff890`033bf110 00000000`00000000 fffff880`016cf527 00000000`00000005
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x50
PROCESS_NAME: crashreporter.
FAILURE_BUCKET_ID: X64_0x50_Ntfs!NtfsFindPrefixHashEntry+1fe
MaxSpeed: 3070
CurrentSpeed: 3073
BiosVersion = 0703
BiosReleaseDate = 02/24/2010
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
??????????????????????????????????????????????????????????????????????????????????????``
Debug session time: Sat Sep 8 21:20:27.703 2012 (UTC - 4:00)
Loading Dump File [C:\Users\Owner\Bsodapps\090812-15693-01.dmp]
System Uptime: 0 days 0:07:48.607
BugCheck 4E, {99, a9ca3, 0, aa823}
Probably caused by : memory_corruption ( nt!MiBadShareCount+4c )
Bugcheck code 0000004E
Arguments 00000000`00000099 00000000`000a9ca3 00000000`0... Read more

http://www.techsupportforum.com/forums/f299/bsod-ntoskrnl-exe-666207.html
Relevancy 42.57%

hi all,

i am having random bsod and i always come across ntoskrnl.exe and others like hal.dll. but all the bsod have bugCheck code: 0x101. i am attaching the file of the bsod as instructed in the posting of bsod section.

Also, sometimes, my computer just freezes and comes back to life after 2-4 mintues and the event manager shows event id 7036. its normally application experience that freezes the come, but comes back to life, and sometimes i have to hard reboot the comp.

pls be kind enough to suggest and have a look at my zip files

A:BSOD: ntoskrnl.exe and others

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

If you are overclocking STOP
We could also use some system information, which you can get easily by running msinfo32.
To do that go to start>run>type msinfo32>enter

When it is finished running go to file>save>name it and upload to us here.
You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.



To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

http://www.sevenforums.com/bsod-help-support/223474-bsod-ntoskrnl-exe-others.html
Relevancy 42.57%

Hello everyone
After reading many forums i still can't find an answer for the following problem:

My system was running perfectly until i decided to change the GPU, from a GTX 8800 to a MSI 560 Ti Hawk.

During games or video editing programs i get BSOD crashes which appear randomly. I have also attached the minidump.
The problem seems to be pointing at:
ntoskrnl.exe
Unable to load image \SystemRoot\system32\ntoskrnl.exe, Win32 error 0n2

I have tried both to run memtest over night and also video memory test. No error here...

When i run driver verifier (start->verifier.exe) and choose the ntoskrnl.exe file, upon restart i can not boot in windows (same BSOD). I can only run system restore to log back in.

System specs:
Intel Q6600
asus mobo
4GB memory
MSI gtx 560 Ti Hawk
Thanks everyone for taking you time to help.

A:BSOD from ntoskrnl.exe

Hello,

I wonder if your PSU might be underpowering your new card. The old card demanded 105w, the new one 170. What is the make/model of your PSU?

...Summary of the dumps:

Code:

Built by: 7601.17592.amd64fre.win7sp1_gdr.110408-1631
Debug session time: Mon Jul 18 17:46:42.670 2011 (UTC - 4:00)
System Uptime: 0 days 23:21:47.340
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+4621f )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x50
PROCESS_NAME: svchost.exe
FAILURE_BUCKET_ID: X64_0x50_nt!_??_::FNODOBFM::_string_+4621f
BiosReleaseDate = 12/14/2007
SystemProductName = Maximus Formula
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.17592.amd64fre.win7sp1_gdr.110408-1631
Debug session time: Sun Jul 17 17:11:28.177 2011 (UTC - 4:00)
System Uptime: 0 days 1:41:02.473
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : dxgkrnl.sys ( dxgkrnl!memcpy+60 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x50
PROCESS_NAME: dwm.exe
FAILURE_BUCKET_ID: X64_0x50_dxgkrnl!memcpy+60
BiosReleaseDate = 12/14/2007
SystemProductName = Maximus Formula
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.17592.amd64fre.win7sp1_gdr.110408-1631
Debug session time: Thu Jul 21 17:33:47.833 2011 (UTC - 4:00)
System Uptime: 0 days 0:00:46.519
Probably caused by : ntkrnlmp.exe ( nt!VerifierBugCheckIfAppropriate+3c )
BUGCHECK_STR: 0xc4_13c
DEFAULT_BUCKET_ID: VERIFIER_ENABLED_VISTA_MINIDUMP
PROCESS_NAME: svchost.exe
FAILURE_BUCKET_ID: X64_0xc4_13c_VRFK_nt!VerifierBugCheckIfAppropriate+3c
BiosReleaseDate = 12/14/2007
SystemProductName = Maximus Formula
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.17592.amd64fre.win7sp1_gdr.110408-1631
Debug session time: Thu Jul 21 18:29:37.998 2011 (UTC - 4:00)
System Uptime: 0 days 0:00:50.668
Probably caused by : ntkrnlmp.exe ( nt!VerifierBugCheckIfAppropriate+3c )
BUGCHECK_STR: 0xc4_13c
DEFAULT_BUCKET_ID: VERIFIER_ENABLED_VISTA_MINIDUMP
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0xc4_13c_VRFK_nt!VerifierBugCheckIfAppropriate+3c
BiosReleaseDate = 12/14/2007
SystemProductName = Maximus Formula
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.17592.amd64fre.win7sp1_gdr.110408-1631
Debug session time: Thu Jul 21 15:22:11.656 2011 (UTC - 4:00)
System Uptime: 0 days 8:35:19.326
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+4621f )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x50
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0x50_nt!_??_::FNODOBFM::_string_+4621f
BiosReleaseDate = 12/14/2007
SystemProductName = Maximus Formula
??????????????????????????????????????????????????????????????????????????????????????``

http://www.sevenforums.com/bsod-help-support/176472-bsod-ntoskrnl-exe.html