Windows Support Forum

frequent BSOD on my computer due to ntoskrnl.exe+7cc40

Q: frequent BSOD on my computer due to ntoskrnl.exe+7cc40

HI my name is banby and i'm using this computer:

manufacturer: Dell
model :inspiron 570
processor : AMD ATHLON(TM) IIx2 250 processor 3.00 GHz
installed memory(RAM):4.00 GB (3.75 GB usable)
also, i'm using a windows 7 home premium sp1 64 bit.
well, since 2 months my computer is shutting down unexpectly and a blue screen appear.sometimes it happens 3 to 4 times a day. After researches in minidump repports,i found a that it was due to

*msahci.sys
*ntoskrnl.exe ...
now,i'm confused i don't know what to do to fix this issue
i also collected reports with sf diagnostic tool that i submitted with this post
thank you to help me

Relevancy 100%
Preferred Solution: frequent BSOD on my computer due to ntoskrnl.exe+7cc40

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: frequent BSOD on my computer due to ntoskrnl.exe+7cc40

Welcome aboard, banby.

► A lot of problem creators are there
Catalyst Control Center
Norton AntiVirus ; replace by Microsoft Security Essentials - Free Antivirus for Windows
PC Tools Registry Mechanic
Roxio Creator Starter
WinUtilities
Wise Care 365
► Some Dell Junks are also present there. Remove them up too.

Clean Up Factory Bloatware
► Free up the startup.

Click on the Start button
Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the “Startup” tab.
Deselect all items other than the antivirus.
Apply > OK
Accept the restart.
► Finally, Your crash dumps are not showing any finite probable cause. In such a situation, it is better to enable Driver Verifier to monitor the drivers.

Driver Verifier - Enable and Disable

Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

Let us know the results, with the subsequent crash dumps, if any.

http://www.sevenforums.com/bsod-help-support/255609-frequent-bsod-my-computer-due-ntoskrnl-exe-7cc40.html
Relevancy 89.87%

Hi, I've been having this BSOD appear very randomly.

IRQL_NOT_LESS_OR_EQUAL 0x0000000a
(all reports in .rar file)

Sometimes within 1 hour, other times as long as 24hrs+. I've got my BIOS/Drivers up to date for my CPU, Graphics Card, and Motherboard. I've rigorously tested my memory and have never had any issues arise.

It has occurred during
3d gaming,
when the system has been idle,
also when browsing with firefox or ie.

Any help at all would be appreciated, I've struggled with this BSOD for years I would love to finally find whats causing it.

Thank you.

A:BSOD ntoskrnl.exe+26ee0 ntoskrnl.exe+7cc40

  
Quote: Originally Posted by postal


Hi, I've been having this BSOD appear very randomly.

IRQL_NOT_LESS_OR_EQUAL 0x0000000a
(all reports in .rar file)

Sometimes within 1 hour, other times as long as 24hrs+. I've got my BIOS/Drivers up to date for my CPU, Graphics Card, and Motherboard. I've rigorously tested my memory and have never had any issues arise.

It has occurred during
3d gaming,
when the system has been idle,
also when browsing with firefox or ie.

Any help at all would be appreciated, I've struggled with this BSOD for years I would love to finally find whats causing it.

Thank you.


First lets start with asacpi.sys yours dated 2005
1-ASACPI.SYS

The pre 2009 version of this driver is a known BSOD cause.

Please visit this link: ASUS teK Computer Inc. -Support- Drivers and Download P7P55D LE
ASUSTeK Computer Inc. -Support- Drivers and Download P7P55D LE

Scroll down to the Utilities category, then scroll down to the "ATK0110 driver for WindowsXP/Vista/Windows 7 32&64-bit" (it's about the 12th item down).
Download and install it.
Go to C:\Windows\System32\drivers to check and make sure that the ASACPI.SYS file is date stamped from 2009 or 2010 (NOT 2005).

http://www.sevenforums.com/bsod-help-support/194256-bsod-ntoskrnl-exe-26ee0-ntoskrnl-exe-7cc40.html
Relevancy 87.72%

Hi I have a new rig i built my self and it runs perfectly except the occasional BSOD and i cant for the life of me work out why - - dmp BAD POOL HEADER x fffff a a ff af a a fffff a a ntoskrnl exe ntoskrnl exe cc NT Kernel amp System Microsoft Windows Operating System Microsoft Corporation win sp gdr - x ntoskrnl exe cc C Windows Minidump - - dmp - - dmp PAGE FAULT IN NONPAGED AREA x fffffa fffff b d ntoskrnl exe ntoskrnl exe cc NT Kernel amp System Microsoft Windows Operating System Microsoft Corporation win BSOD's ntoskrnl.exe+7cc40 sp gdr - x ntoskrnl exe cc C Windows Minidump - - dmp - - dmp KMODE EXCEPTION NOT HANDLED x e ntoskrnl exe ntoskrnl exe cc NT Kernel amp System Microsoft Windows Operating System Microsoft Corporation win sp gdr - x ntoskrnl exe cc C Windows Minidump - - dmp Basically i bought one of the affected mother boards before the b revision for sandy bridge systems I managed to get an updated mobo via RMA So i changed mother boards ntoskrnl.exe+7cc40 BSOD's over Then a few weeks later i changed my RAM old was Corsair XMS mhz gb new is Corsair Vengeance mhz ntoskrnl.exe+7cc40 BSOD's gb I also started off with a F Corsair ssd gb and change dthat to a new force gb ssd Since i reinstalled my OS win x i keep getting BSOD's I have formatted and reinstalled and the same happens Please any assistance would be greatly appreciated Attached my minidump folder Thanks in advance

A:ntoskrnl.exe+7cc40 BSOD's

  
Quote: Originally Posted by Kristofaaa


Hi,

I have a new rig i built my self and it runs perfectly except the occasional BSOD and i cant for the life of me work out why...

091711-6006-01.dmp 17/09/2011 21:33:23 BAD_POOL_HEADER 0x00000019 00000000`00000003 fffff8a0`1205a820 ff8af8a0`1205a820 fffff8a0`1205a820 ntoskrnl.exe ntoskrnl.exe+7cc40 NT Kernel & System Microsoft? Windows? Operating System Microsoft Corporation 6.1.7601.17640 (win7sp1_gdr.110622-1506) x64 ntoskrnl.exe+7cc40 C:\Windows\Minidump\091711-6006-01.dmp 8 15 7601 293,064

091311-5896-01.dmp 13/09/2011 18:56:14 PAGE_FAULT_IN_NONPAGED_AREA 0x00000050 fffffa80`55685460 00000000`00000001 fffff880`06b9d316 00000000`00000005 ntoskrnl.exe ntoskrnl.exe+7cc40 NT Kernel & System Microsoft? Windows? Operating System Microsoft Corporation 6.1.7601.17640 (win7sp1_gdr.110622-1506) x64 ntoskrnl.exe+7cc40 C:\Windows\Minidump\091311-5896-01.dmp 8 15 7601 291,016

091311-7722-01.dmp 13/09/2011 13:40:14 KMODE_EXCEPTION_NOT_HANDLED 0x0000001e 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 ntoskrnl.exe ntoskrnl.exe+7cc10 NT Kernel & System Microsoft? Windows? Operating System Microsoft Corporation 6.1.7601.17640 (win7sp1_gdr.110622-1506) x64 ntoskrnl.exe+7cc10 C:\Windows\Minidump\091311-7722-01.dmp 8 15 7601 288,232

Basically i bought one of the affected mother boards before the b3 revision for sandy bridge systems. I managed to get an updated mobo via RMA.

So i changed mother boards over. Then a few weeks later i changed my RAM, old was Corsair XMS 1600mhz 4gb, new is Corsair Vengeance 1866mhz 8gb.

I also started off with a F60 Corsair ssd 60gb and change dthat to a new force 3 120gb ssd.

Since i reinstalled my OS (win 7 x64) i keep getting BSOD's. I have formatted and reinstalled and the same happens.

Please any assistance would be greatly appreciated...

Attached my minidump folder...

Thanks in advance.


Easy, these were related to your C-media Audio driver. I would update to the newest version below.

C-Media Electronics, Inc.


Since pool corruption was involved I would run these two tests.
1-Memtest.

*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program.

*Boot from the CD, and leave it running for at least 6 or 8 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

RAM - Test with Memtest86+

2-Driver verifier






Quote:
I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wai... Read more

http://www.sevenforums.com/bsod-help-support/187229-ntoskrnl-exe-7cc40-bsods.html
Relevancy 87.72%

Have received this BSOD several times while the machine has been in Sleep Mode. Normal operation is to turn the monitor off and put the computer into that mode during the night. The BSOD is the normal DRIVER_POWER_STATE_FAILURE ntoskrnl.exe caused by address ntoskrnl.exe+7cc40.

Desktop Computer less than a year old. OEM version of Win7 Pro 64-bit pre-installed at time of purchase. Just updated computer info for this machine.,
Uploaded Health Report.html and a Windows_NT6_BSOD_v3.03_jcgriff2_.exe.zip. Did not see the Health Report upload so I redid it as a zip file.
If I missed anything, please let me know. Really do appreciate your help to resolve this. Have not had a BSOD at any other time than at Sleep Mode to the best of my knowledge.

The 031712-109263-01 is the zip of my minidump file on the day of the event.

A:BSOD ntoskrnl.exe+7cc40

You uploaded the application instead of the data.
Try this method.

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

If you are overclocking STOP

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.



To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

http://www.sevenforums.com/bsod-help-support/219840-bsod-ntoskrnl-exe-7cc40.html
Relevancy 87.72%

Im getting massive BSOD's every day. I can't even use this computer most hours and it'll probably BSOD in a few minuetes.

Could someone look at the txt file I included and point me in the right direction? Or if I need more info please tell me!!! Because Im going crazy with this BSOD.

A:BSOD ntoskrnl.exe 7cc40

Please follow this post and reply accordingly.

http://www.sevenforums.com/crashes-d...tructions.html

http://www.sevenforums.com/bsod-help-support/221428-bsod-ntoskrnl-exe-7cc40.html
Relevancy 86.43%

The BSODs appear random - eg once during surfing with IE9, another time while using Photoshop. BSODs not regular or often - maybe once a fortnight - but seemingly completely unpredictable.

MemTest run (just for an hour) didn't show up any problems.

I'd be grateful for a steer on what can be causing the BSODs.

Thanks

A:Intermittent BSOD ntoskrnl.exe (nt+7cc40)

  
Quote: Originally Posted by Davidc2


The BSODs appear random - eg once during surfing with IE9, another time while using Photoshop. BSODs not regular or often - maybe once a fortnight - but seemingly completely unpredictable.

MemTest run (just for an hour) didn't show up any problems.

I'd be grateful for a steer on what can be causing the BSODs.

Thanks


Easy, your Symantec is causing memory corruption. Remove and replace with Microsoft Security Essentials
ftp://ftp.symantec.com/public/englis...moval_Tool.exe
Virus, Spyware & Malware Protection | Microsoft Security Essentials

http://www.sevenforums.com/bsod-help-support/192323-intermittent-bsod-ntoskrnl-exe-nt-7cc40.html
Relevancy 86.43%

So I do have a OC, but it was stable (Intel Burn Test, Prime95). I was playing the Binding of Isaac (flash game on steam). What is most likely the cause here?

A:Had a random BSoD, not sure what the cause, ntoskrnl.exe+7cc40, dmp in

Oh I should note my PC first froze (but my mouse could still move) for a while, before the blue screen came.

Could flash have caused this? I did get a Flash update today.

http://www.sevenforums.com/bsod-help-support/198614-had-random-bsod-not-sure-what-cause-ntoskrnl-exe-7cc40-dmp.html
Relevancy 86.43%

10 days ago i have BSOD frequently. Even when the computer rest appears suddenly a blue screen. SOmetimes when i navigate on Internet.
I have to types of BSOD:
IRQL_NOT_LESS_OR_EQUAL caused by the adress ntoskrnl.exe+7cc40
BSOD caused by hal.dll+12a3b
My OS is Win7 Home Premium SP1. I send you the report of BlueScreenView with more details.
Could you tell me please some advice?
Thank you very much

A:BSOD IRQL_NOT_LESS_OR_EQUAL ntoskrnl.exe+7cc40

NOTE: Please provide the following information for a more detailed response: http://www.techsupportforum.com/foru...ta-452654.html

While waiting for a reply:

I suggest starting all troubleshooting with the following diagnostic tests (located at this link: Hardware Diagnostics ). They'll save you a lot of time and heartache if there is a hardware failure, and you'll have the disks on hand in case you need them in the future:

Quote:




H/W Diagnostics:
Please start by running these bootable hardware diagnostics:
Memory Diagnostics (read the details at the link)
Hard Drive Diagnostics (read the details at the link) - Test ALL of the hard drives.

Also, please run one of these free, independent online malware scans to ensure that your current protection hasn't been compromised: Free Online AntiMalware Resources (read the details at the link)
There are also free, bootable antivirus disks at this link: Free Online AntiMalware Resources - Bootable Disks




Also, please run Driver Verifier according to these instructions: Driver Verifier Settings

http://www.techsupportforum.com/forums/f299/bsod-irql_not_less_or_equal-ntoskrnl-exe-7cc40-633924.html
Relevancy 86.43%

Hello,

I am getting BSOD every couple of days with no apparent reason sometime with doing virus scans, running windows movie maker and sometime while idle. Not sure what's going on please help - I have attached .dmp for assessment.

http://www.sevenforums.com/attachmen...1&d=1331424155

Hopefully someone can advise me on this not really a huge problem but would like to resolve it before it becomes one.

A:Random BSOD - ntoskrnl.exe (nt+7cc40) Please Help

Related to your directx

Diagnosing basic problems with DirectX

http://www.sevenforums.com/bsod-help-support/218697-random-bsod-ntoskrnl-exe-nt-7cc40-please-help.html
Relevancy 86.43%

hi here is the issue about two weeks ago Windows BSOD 7 ntoskrnl.exe+7cc40 - I took my laptop to the service because its disk drive not seeing any cd or dvd than they changed it with a new one after that they said we updated the bios after or days later BSOD Windows 7 - ntoskrnl.exe+7cc40 I'm on the Internet I got blue screen error driver power state failure I tried to update some of my driver such as graphic driver and tried to update windows it did't work third crash happened when I was trying to model something I opened the program at the same time rhino solid dsmax last crash was happened this morning when I was trying to restart my computer it says closing the pc but after - minutes later it crashes in addition my laptop opens very slowly than usual Some information about the crash Sorunlu Olay Ad BlueScreen OS S r m Yerel Kimlik BCCode f BCP BCP FFFFFA DA BCP FFFFF BA BCP FFFFFA E B OS Version Service Pack Product I check my pc with bluescreenview it says ntoskrnl cc error but don't know what to do and sorry for my bad English I really need your help Thank you in advance

A:BSOD Windows 7 - ntoskrnl.exe+7cc40

Welcome aboard, Brabbit.

Fresco Logic xHCI (USB3) Device Driver is initially identified as the cause of the crash.

Code:
Irp is active with 4 stacks 3 is current (= 0xfffffa8005e36410)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace. Pending has been returned
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 16, 0] 0 0 fffffa800667da10 00000000 00000000-00000000
\Driver\pci
Args: 00000000 00000000 00000000 00000005
>[ 16, 2] 0 e1 fffffa800860dac0 00000000 fffff800032e31b0-fffffa800e4492c0 Success Error Cancel pending
Unable to load image \SystemRoot\system32\DRIVERS\FLxHCIc.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for FLxHCIc.sys
*** ERROR: Module load completed but symbols could not be loaded for FLxHCIc.sys
\Driver\FLxHCIc nt!PopSystemIrpCompletion
Args: 00016600 00000000 00000006 00000005
[ 0, 0] 0 0 00000000 00000000 00000000-fffffa800e4492c0

Args: 00000000 00000000 00000000 00000000
And, the driver is very old.

Code:
start end module name
fffff880`049a5000 fffff880`049f5000 FLxHCIc T (no symbols)
Loaded symbol image file: FLxHCIc.sys
Image path: \SystemRoot\system32\DRIVERS\FLxHCIc.sys
Image name: FLxHCIc.sys
Timestamp: Thu Feb 24 14:29:52 2011 (4D661E08)
CheckSum: 0004C3F2
ImageSize: 00050000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
You try to update it from FRESCO LOGIC INC.===Leap into SuperSpeed===.

The Device Object of the blocked IRP is really interesting.

Code:
Device object (fffffa800860dac0) is for:
InfoMask field not found for _OBJECT_HEADER at fffffa800860da90
\Driver\FLxHCIc DriverObject fffffa8008668910
Current Irp 00000000 RefCount 0 Type 00000022 Flags 00002050
DevExt fffffa8008af1370 DevObjExt fffffa800860dc30
ExtensionFlags (0000000000)
Characteristics (0x00000100) FILE_DEVICE_SECURE_OPEN
AttachedTo (Lower) fffffa800667d7f0*** WARNING: Unable to verify timestamp for ACPI.sys
*** ERROR: Module load completed but symbols could not be loaded for ACPI.sys
Unable to load image \SystemRoot\System32\Drivers\sptd.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for sptd.sys
*** ERROR: Module load completed but symbols could not be loaded for sptd.sys
\Driver\ACPI
Device queue is not busy.
Daemon Tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known BSOD causer. Uninstall the program at first. Then download SPTD standalone installer from Disk-Tools.com, and execute the downloaded file as guided below :
Double click to open it.
Click this button only:

If it is grayed out, as in the picture, there is no more SPTD in your system, and you just close the window.
From another crash dump, that is alos a stop 0x9F; showing a different crasher. Atheros Bluetooth Driver.

Code:
Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 e1 fffffa8009de5030 00000000 00000000-00000000 pending
Unable to load image \SystemRoot\system32\DRIVERS\btfilter.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for btfilter.sys
*** ERROR: Module load completed but symbols could not be loaded for btfilter.sys
\Driver\BtFilter
Args: 00000000 00000001 00000001 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-fffffa800ec5dc90

Args: 00000000 00000000 00000000 00000000
Update it from ATHEROS drivers for Microsoft Windows (Atheros?????).

Apparently there are no other errors, but as the system is crashing, you should pay attention to these suggestions, too.

Free up the startup.
Click on the Start button
Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the “Sta... Read more

http://www.sevenforums.com/bsod-help-support/273475-bsod-windows-7-ntoskrnl-exe-7cc40.html
Relevancy 86.43%

Hi all, I have been getting BSODs since January 2012 while playing games or simply surfing the internet using Firefox or IE9.

My PC build is as follows:

AMD Phenom II X4 945
Biostar A880G+ motherboard
Kingston DDR3 PC1333 x 2 (4GB total)
Palit GTX460 768MB PCI-E
Western Digital HDD 500GB SATA
Windows 7 Home Premium 64bit (OEM DVD from retail shop)

Have just taken out 1 DRAM to isolate the problem; since there are some cases like mine that eventually suggest physical memory module problems in this forum.

Dump files and system health report html file attached.

A:Random BSOD - ntoskrnl.exe+7cc40

Hi Miki, welcome to SevenForums!

Four dumps, two memory management, one IRQL and one System Service Exception. There's a few things I want you to do!

First off, in your drivers list I noticed you have dtsoftbus01.sys, which is a driver for Daemon Tools, and Daemon Tools is a VERY large causer of BSODs in the W7 environment. Please fully uninstall Daemon Tools and then restart your system.

Two tests I'd like you to run:






Quote:
Memtest:

Read the following to test your memory for errors.

Driver Verifier:

Read the following to enable Driver Verifier. Use Driver Second if Memtest finds nothing, as it's likely a software / driver issue, we just aren't being told what it is, and hopefully Driver Verifier will than force a crash if it finds the violating driver.



Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1A, {41790, fffffa80008fa0f0, ffff, 0}

Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+36024 )

Followup: MachineOwner
---------

1: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

MEMORY_MANAGEMENT (1a)
# Any other values for parameter 1 must be individually examined.
Arguments:
Arg1: 0000000000041790, The subtype of the bugcheck.
Arg2: fffffa80008fa0f0
Arg3: 000000000000ffff
Arg4: 0000000000000000

Debugging Details:
------------------
BUGCHECK_STR: 0x1a_41790

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

PROCESS_NAME: MemeoDashboard

CURRENT_IRQL: 0

LAST_CONTROL_TRANSFER: from fffff8000310a150 to fffff8000309ac40

STACK_TEXT:
fffff880`092715f8 fffff800`0310a150 : 00000000`0000001a 00000000`00041790 fffffa80`008fa0f0 00000000`0000ffff : nt!KeBugCheckEx
fffff880`09271600 fffff800`030880ff : fffffa80`00000000 00000000`085fffff 00000000`00000000 00000000`00000000 : nt! ?? ::FNODOBFM::`string'+0x36024
fffff880`092717c0 fffff800`03099ed3 : ffffffff`ffffffff fffff880`09271a90 fffff880`09271a98 00000000`00008000 : nt!NtFreeVirtualMemory+0x61f
fffff880`092718c0 fffff800`03096470 : fffff800`033179af 00000000`00000010 00000000`00000086 fffff880`09271a88 : nt!KiSystemServiceCopyEnd+0x13
fffff880`09271a58 fffff800`033179af : 00000000`00000010 00000000`00000086 fffff880`09271a88 00000000`00000000 : nt!KiServiceLinkage
fffff880`09271a60 fffff800`03370b8d : 00000000`08500000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!RtlFreeUserStack+0x27
fffff880`09271a90 fffff800`03370eed : fffff880`00000000 00000000`0777e300 00000000`7ef12000 00000000`00000000 : nt!PspExitThread+0x5dd
fffff880`09271b90 fffff800`03370ff5 : fffffa80`06e74b60 00000000`00000000 fffffa80`06e74b60 00000000`0777ec00 : nt!PspTerminateThreadByPointer+0x4d
fffff880`09271be0 fffff800`03099ed3 : fffffa80`06e74b60 fffff880`09271ca0 00000000`7ef12000 00000000`7ef12000 : nt!NtTerminateThread+0x45
fffff880`09271c20 00000000`771f184a : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
00000000`0777e348 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x771f184a
STACK_COMMAND: kb

FOLLOWUP_IP:
nt! ?? ::FNODOBFM::`string'+36024
fffff800`0310a150 cc int 3

SYMBOL_STACK_INDEX:... Read more

http://www.sevenforums.com/bsod-help-support/216487-random-bsod-ntoskrnl-exe-7cc40.html
Relevancy 86.43%

For two BSOD every ntoskrnl.exe+7cc40 time weeks I am getting or times a day the same BSOD with ntoskrnl exe cc with my Dell z Mostly it happens when I am not working on the computer But also it happens during my work BSOD every time ntoskrnl.exe+7cc40 but I did not notice a real pattern My computer is a Dell z of months old bits My Windows Home Premium was installed by Dell And I have updated it normally Service Pack I also use System Mechanic The only strange thing I notice already for a long time before the BSOD happened the first time that the computer does not go to sleep when it is not on battery but stays alive including the screen the whole night Or when it is on battery the next morning there is no energy any more But I don't know if there is any connection Of course I changed the settings many times but no effect Attached the files the way it was asked I really hope someone can give me a direction the find the solution Thank you in advance from Amsterdam Holland Topdognl

A:BSOD every time ntoskrnl.exe+7cc40

These were Related to NETwNs64.sys Wireless WiFi Link Driver from Intel Corporation. I would re-install the newest version available.

http://www.sevenforums.com/bsod-help-support/210952-bsod-every-time-ntoskrnl-exe-7cc40.html
Relevancy 86.43%

Greetings Here is the issue About mid December I began having problems with 7 ntoskrnl.exe+7cc40 Windows BSOD - random BSOD's The initial tell-tale signs led to numerous issues I began slowly eliminating causes until I was left with Re-Installing Windows Since then I have had the same issues over and over again Here BSOD Windows 7 - ntoskrnl.exe+7cc40 are the corrective actions I have taken thus far from most recent to windows install In Bios I manually set timing of RAM to manufacture's recommendations from Website Identified and removed bad RAM Verified remaining RAM with hours of Memtest passed defects Replaced Motherboard M A T USB Used known functional video card uninstalled driver of old card before install Tested computer with each stick of RAM using different slots Clean installed windows ---- I included all dump files in the zip file since install but the last - are after the new motherboard and the last are after the verified RAM The very last dump was recorded using Driver Verifier I will continue to stress test my machine with driver verifier and post the dump files as I get them I am going on months and if this doesn't get fixed soon I'm trying a hammer lol

A:BSOD Windows 7 - ntoskrnl.exe+7cc40

As Promised:

Driver Verifier enabled as directed and ran it into the ground.

Seem to be alot of views... Is my problem common or just scaring away the Gurus?

Here are a few things I have tried.

Rolled back AMD driver to last version, Crashed.

Removed all peripherals except USB keyboard and Mouse and monitor.

Ran GPUZ through a crash. Log attached.

I will be going to Saphire's site and downloading any driver they have listed there for my Video Card (Radeon HD 6850)

Please help if you can.

http://www.sevenforums.com/bsod-help-support/214051-bsod-windows-7-ntoskrnl-exe-7cc40.html
Relevancy 85.57%

Dear All,

i have problem with my computer. From time to time appears BSOD. I attached few minidumps, and please analyze it. I tried to open them in BlueScreenViewer and all of them are related to ntoskrnl.exe as i wrote in title.

This is my configuration:
Seagate 1 TB Barracuda 7200.12 (32MB, Serial ATA III)
Radeon 6850 XFX 1GB 2xDVI&HDMI&DP (PCI-E)
Intel Core i5 2500K 3,30 GHz BOX
Corsair CMPSU-800GEU - 800W
Microsoft Windows 7 Home Premium PL OEM 64Bit SP1
Gigabyte GA-H67MA-UD2H-B3
GoodRam DDR3 4GB 1333MHz CL9
CoolerMaster Elite 310 Black-Orange - bez zasilacza
Logitech Wireless Desktop MK320
LG SuperMulti DVD+/-RW GH22NS40 bulk black (bez oprogramowania)

Any ideas?

Thank Yoy in advance

Damian

A:BSOD, ntoskrnl.exe+7cc40, appears randomly.

Two issues

1-sptd.sys

Please remove any CD visualization programs such as Daemon Tools and Alcohol 120%.

They use a driver, found in your dmp, called sptd.sys, that is notorious for causing BSODs.

Use this SPTD uninstaller DuplexSecure - Downloads DuplexSecure - FAQ

when you're done you can use this Freeware:

MagicISO Virtual CD/DVD-ROM (MagicDisc) in its place

Using MagicISO to create ISO image files

2- 3 year old ESET smart security. This is the cause of at least the ones in march, and Feb. Update to current version. If you still are crashing remove it to test.

http://www.sevenforums.com/bsod-help-support/219993-bsod-ntoskrnl-exe-7cc40-appears-randomly.html
Relevancy 85.57%

I've had half a dozen crashes since December that I can easily reproduce when attempting to copy BSOD ntoskrnl.exe+7cc40 copying files, large amounts of data hundreds of GB BSOD copying files, ntoskrnl.exe+7cc40 between non-OS drives Bug check code is usually x a IRQL NOT LESS OR EQUAL but I've also seen x NTFS FILE SYSTEM and x c DRIVER CORRUPTED EXPOOL The crash happens randomly during the copy process sometimes very quickly and other times only after a half hour or more Dumps are attached and debugger analyses for the most recent crashes have been copied below I thought I had a memory leak because file copy operations always consumed all GB of physical memory installed but it turns out I did not have swap files set for my non-OS drives I setup swap files this morning which reduced physical memory use during data transfer from GB to GB but still ended up with a BSOD despite this fix I've had BSODs when using windows shell to copy or a freeware utility syncback I've also had BSODs when trying to copy over a network to a non-OS drive I'm not running any quirky security software MSE Comodo Firewall My rig is overclocked CPU-Z Validator but stable hours prime all intel burn tests memtest for hours etc See http img imageshack us img bstability png SFC scannow reports nothing Disk check has not reported errors Ideas Code Microsoft R Windows Debugger Version AMD Copyright c Microsoft Corporation All rights reserved Loading Dump File C Windows Minidump - - dmp Mini Kernel Dump File Only registers and stack trace are available Symbol search path is SRV C Symbols http msdl microsoft com download symbols Executable search path is C Windows System Windows Kernel Version Service Pack MP procs Free x Product WinNt suite TerminalServer SingleUserTS Built by amd fre win sp gdr - Machine Name Kernel base xfffff a PsLoadedModuleList xfffff f Debug session time Tue Feb UTC - System Uptime days Loading Kernel Symbols Loading User Symbols Loading unloaded module list Bugcheck Analysis Use analyze -v to get detailed debugging information BugCheck A a fffff f Probably caused by memory corruption nt MiRestoreTransitionPte Followup MachineOwner --------- kd gt analyze -v Bugcheck Analysis IRQL NOT LESS OR EQUAL a An attempt was made to access a pageable or completely invalid address at an interrupt request level IRQL that is too high This is usually caused by drivers using improper addresses If a kernel debugger is available get the stack backtrace Arguments Arg a memory referenced Arg IRQL Arg bitfield bit value read operation write operation bit value not an execute operation execute operation only on chips which support this level of status Arg fffff f address which referenced memory Debugging Details ------------------ WRITE ADDRESS GetPointerFromAddress unable to read from fffff b a CURRENT IRQL FAULTING IP nt MiRestoreTransitionPte fffff f f fba b f lock bts dword ptr rbx h Fh CUSTOMER CRASH COUNT DEFAULT BUCKET ID VISTA DRIVER FAULT BUGCHECK STR xA PROCESS NAME SyncBack exe TRAP FRAME fffff ce cf -- trap xfffff ce cf NOTE The trap frame does not contain all registers Some register values may be zeroed or incorrect rax rbx rcx fffff d e rdx rsi rdi rip fffff f rsp fffff ce d rbp r r r r r r r r iopl nv up ei pl nz na po nc nt MiRestoreTransitionPte x fffff f f fba b f lock bts dword ptr rbx h Fh ds Resetting default scope LAST CONTROL TRANSFER from fffff e to fffff c STACK TEXT fffff ce ce fffff e a a nt KeBugCheckEx fffff ce ce fffff e fffff a d bff nt KiBugCheckDispatch x fffff ce cf fffff f fffffa a ff fffffa cd a fffff a e ad fffffa a nt KiPageFault x fffff ce d fffff d ad fffff fffffa a ff fffffa a nt MiRestoreTransitionPte x fffff ce d b fffff b bc fffff ce d ffffffff ffffffff nt MiRemoveLowestPriorityStandbyPage x d fffff ce d fffff afe e fffff c fffff nt MmCopyToCachedPage xe fffff ce d fffff b f fffffa feb fffff ce d nt CcMapAndCopyInToCache x e fffff ce d fffff bf fffff ce d fffffa fc e nt CcCopyWrite x fffff ce d a fffff a fffffa fc... Read more

A:BSOD copying files, ntoskrnl.exe+7cc40

Nice post thanks

These crashes were caused by memory corruption/exception (probably a driver).
Please run these two tests to verify your memory and find which driver is causing the problem.

If you are overclocking anything reset to default before running these tests.
In other words STOP!!!
Memtest.





Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.



RAM - Test with Memtest86+

Driver verifier






Quote:
Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

So, I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Special Pool", "Force Pending I/O Requests" and "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

Reboot into Windows (after the crash) and turn off Driver Verifier by going back in and selecting "Delete existing settings" on the first page, then locate and zip up the memory dump file and upload it with your next post.

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.


Using Driver Verifier to identify issues with Windows drivers for advanced users

http://www.sevenforums.com/bsod-help-support/212996-bsod-copying-files-ntoskrnl-exe-7cc40.html
Relevancy 85.57%

hi

can someone please help i keep getting blue error screens different types of errors but all having the same crash address been using bluescreen viewer to see the errors

iv tried as much as i can by updating drivers and checking if windows is up to date

looked on other forums but just want a simple answer to what the problem actually is

iv uploaded the health report and the crash files

thank u

A:BSOD all from same crash address ntoskrnl.exe+7cc40.. please help!!

20 memory dumps over the past 3 days - Wow!

If you are using a USB mouse, it's safe to ignore the error in perfmon /report about a PS2 mouse

Only 63 memory dumps after SP1 - most systems have more than 70. Please check Windows Update for all available updates.

Windows 7 does not like wireless USB devices such as the NETGEAR WNDA3100v2 device installed on your system. Here's my rant about them:





Quote:
I do not recommend using wireless USB devices. Especially in Win7 systems.
These wireless USB devices have many issues with Win7 - and using Vista drivers with them is almost sure to cause a BSOD.
Should you want to keep using these devices, be sure to have Win7 drivers - DO NOT use Vista drivers!!!
An installable wireless PCI/PCIe card that's plugged into your motherboard is much more robust, reliable, and powerful.


More to follow when the memory dumps are finished running (and I have to feed my dogs now!).....

http://www.sevenforums.com/bsod-help-support/212524-bsod-all-same-crash-address-ntoskrnl-exe-7cc40-please-help.html
Relevancy 85.57%

Hello,

This is my 1st time installing Windows 7 Ultimate 64bit on my new rig. While i was using my pc normally, not gaming, it just crashed and went into blue screen. Twice.
First error was MEMORY_MANAGEMENT and the second error was IRQL_NOT_LESS_OR_EQUAL.
And so, i tried using BlueScreenView to open the .dmp files and both of the .dmp files are caused by ntoskrnl.exe.

My rig's spec:
Windows 7 Ultimate 64bit SP1
Intel Core i5 2500
Asus P8P67 LE
Mushkin 4GB DDR3 x 2
500GB WD HDD
Nvidia 9800GT

I've attached the .dmp files. Any help on this issue would be much appreciated. Thanks!

A:Random BSOD caused by ntoskrnl.exe+7cc40

  
Quote: Originally Posted by getxposed


Hello,

This is my 1st time installing Windows 7 Ultimate 64bit on my new rig. While i was using my pc normally, not gaming, it just crashed and went into blue screen. Twice.
First error was MEMORY_MANAGEMENT and the second error was IRQL_NOT_LESS_OR_EQUAL.
And so, i tried using BlueScreenView to open the .dmp files and both of the .dmp files are caused by ntoskrnl.exe.

My rig's spec:
Windows 7 Ultimate 64bit SP1
Intel Core i5 2500
Asus P8P67 LE
Mushkin 4GB DDR3 x 2
500GB WD HDD
Nvidia 9800GT

I've attached the .dmp files. Any help on this issue would be much appreciated. Thanks!


Easy your Kaspersky. Remove and replace with Microsoft Security Essentials

http://support.kaspersky.com/downloa...vremover10.zip

Microsoft Security Essentials - Free Antivirus for Windows

http://www.sevenforums.com/bsod-help-support/194614-random-bsod-caused-ntoskrnl-exe-7cc40.html
Relevancy 85.57%

Three months ago I had an issue with BSODs but they went away I'm a gamer and had no BSODS while playing many games Recently I've been playing the Hunter Red Orchestra F and the Battlefield beta I played for many hours without any issues then ntoskrnl.exe+7cc40 Sudden 0x00000124, BSOD, all of a sudden on the nd of this month had a BSOD while playing Battlefield Keep in mind I had played around hours of Battlefield over the previous days without a hitch so it's not like I was casually playing games And before that I played Red Orchestra for many hours no problems I played a few hours after my computer had restarted without issues The next day on the rd I played in the morning and sure enough minutes into playing I got another BSOD Sudden BSOD, 0x00000124, ntoskrnl.exe+7cc40 then another later in the day playing the Hunter a hunting game Each of these three BSODS gave the same error message Technical Information STOP x x xfffffa d c x b x ntoskrnl exe - Address xfffff c base at xfffff DateStamp x e aaa I have no idea what would have caused this I haven't installed anything new recently hardware or software wise besides those games I had installed new nvidia video drivers for my video card on the th thinking it was that I uninstalled them and installed the prior drivers that gave me no issues in the past The last BSOD occurred while using the older drivers so I don't think it's that I've been stable for over months without issues I'm going to try downclocking my cpu ram to see if that helps but I was stable before that Any idea what the cause is I attached my minidump files to this posting Thanks for trying to help

A:Sudden BSOD, 0x00000124, ntoskrnl.exe+7cc40

Hello Efstratios

* Please remove any CD visualization programs such as Daemon Tools and Alcohol 120%.

They use a driver, found in your dmp, called sptd.sys, that is notorious for causing BSODs.

Use this SPTD uninstaller DuplexSecure - Downloads DuplexSecure - FAQ

When you're done you can use this Freeware MagicISO Virtual CD/DVD-ROM(MagicDisc) in its place.
* Your Norton/Symantec. This is a known cause of BSOD's.
Remove and replace with Microsoft Security Essentials.

http://us.norton.com/support/kb/web_...080710133834EN

Virus, Spyware & Malware Protection | Microsoft Security Essentials

* Old drivers

Code:
ctgame.sys 4/7/2004 11:42:49 AM fffff880`054eb000 33f9f7f6`054efc80 0x33f9ff7600004c80 0x40734e89
RTCore64.sys 5/25/2005 5:39:12 PM fffff880`089f4000 fffff880`089fa000 0x00006000 0x42941d90
secdrv.SYS 9/14/2006 12:18:38 AM fffff880`08115000 fffff880`08120000 0x0000b000 0x4508052e
COMMONFX.DLL 4/10/2007 12:08:38 AM fffff880`0674c000 fffff880`06777000 0x0002b000 0x461a3ad6
CTAUDFX.DLL 4/10/2007 12:08:39 AM fffff880`06f51000 fffff080`07000000 0xfffff800000af000 0x461a3ad7
CTSBLFX.DLL 4/10/2007 12:08:42 AM fffff880`06ea6000 fffff880`06f51000 0x000ab000 0x461a3ada
Rtnic64.sys 3/31/2008 4:39:38 PM fffff880`05263000 fffff300`05277000 0xfffffa8000014000 0x47f0791a
000.fcl 9/27/2008 12:11:22 AM fffff880`08163000 fffff880`0818e000 0x0002b000 0x48dcdf7a
adfs.SYS 11/4/2008 3:48:14 AM fffff880`07c00000 fffff300`07c18000 0xfffffa8000018000 0x490f2b4e
gdrv.sys 3/13/2009 2:22:29 PM fffff880`089de000 fffff880`089e7000 0x00009000 0x49b9d175
ALSysIO64.sys 4/20/2009 6:41:04 AM fffff880`08df8000 fffff300`08e00000 0xfffffa8000008000 0x49eb7e50
spldr.sys 5/12/2009 3:56:27 AM fffff880`02141000 fffff880`02149000 0x00008000 0x4a0858bb
lirsgt.sys 5/18/2009 12:06:57 AM fffff880`08062000 fffff880`0806f000 0x0000d000 0x4a100bf1
atksgt.sys 5/18/2009 12:36:34 AM fffff880`0800a000 fffff880`08059000 0x0004f000 0x4a1012e2
GEARAspiWDM.sys 5/18/2009 11:17:04 PM fffff880`05256000 fffff300`05263000 0xfffffa800000d000 0x4a1151c0
LHidFilt.Sys 6/18/2009 3:49:39 AM fffff880`075b7000 fffff880`075ca000 0x00013000 0x4a391ea3
LMouFilt.Sys 6/18/2009 3:49:43 AM fffff880`075d7000 fffff880`075eb000 0x00014000 0x4a391ea7
LUsbFilt.Sys 6/18/2009 3:49:46 AM fffff880`07577000 01fff880`07587000 0x0200000000010000 0x4a391eaa
How To Find Drivers:




Quote:
- search Google for the name of the driver
- compare the Google results with what's installed on your system to figure out which device/program it belongs to
- visit the web site of the manufacturer of the hardware/program to get the latest drivers (DON'T use Windows Update or the Update driver function of Device Manager).
- if there are difficulties in locating them, post back with questions and someone will try and help you locate the appropriate program.


- - The most common drivers are listed on this page: Driver Reference Driver Reference
- - Driver manufacturer links are on this page: Drivers and Downloads

http://www.sevenforums.com/bsod-help-support/189971-sudden-bsod-0x00000124-ntoskrnl-exe-7cc40.html
Relevancy 85.57%

BSOD at random times, seems to occur more often though, when referencing hard drive memory.
My first problem I need help with is when i try to access a .dmp file i get told something about symbols referencing the following:
ntoskrnl.exe ( nt+7cc40 )
any idea how to fix it?

A:random BSOD's and cant do .dmp ntoskrnl.exe ( nt+7cc40 ) problem

PS. sorry i am not following the exact rules regarding the whole .dmp file thing but i dont know how to do that...

http://www.sevenforums.com/bsod-help-support/208585-random-bsods-cant-do-dmp-ntoskrnl-exe-nt-7cc40-problem.html
Relevancy 85.57%

Hello I must admit I'm completely almost always BSOD, by multiple caused ntoskrnl.exe+7cc40 lost by now and need help The problem is I have this notebookl HP multiple BSOD, almost always caused by ntoskrnl.exe+7cc40 G -b SA Notebook PC Product Specifications HP G -b SA Notebook PC - HP Customer Care United States - English HP G -b SA and I'm getting random BSODs at completely random times Usually is happens after cold start I think I've tried everything hardware-related Memtest h test is ok hdd seems ok too SMART and HDtune machina was in servise center and they replaced mainboard But BSODs are still bumping up I'm running W Home Premium retail multiple BSOD, almost always caused by ntoskrnl.exe+7cc40 version hdd was wiped clean few moths ago so there are no HP quot goodies quot left From what I was able to find it seems like some sort of driver-memory related problem but right now I have no idea what to look for Also service center says in short quot hardware ok must be something in software you are using quot

A:multiple BSOD, almost always caused by ntoskrnl.exe+7cc40

I do not see any really questionable software. K-Lite could cause problems if it was corrupted; codec packages are somewhat worrisome when they get corrupted. Other than that, nothing out of the ordinary.

I did see an out of date driver: netr28x.sys which is your Ralink RT2860 series Wireless LAN Card (you may have a different manufacturer). Download the updated driver from the HP Support site, and use the following steps to re-install the update:

First, download the latest driver. Then do the next steps.
Click Start Menu
Right Click My Computer/Computer
Click Manage
Click Device Manager from the list on the left
Find the device you are trying to uninstall by expanding the appropriate set of devices
Right click the device
Click Uninstall (do not click OK in the dialog box that pops up after hitting Uninstall)
Put a tick in Delete driver software for this device (if this option is available, otherwise just hit OK) and hit OK
Restart your computer only if Windows asks you to.
Install the latest driver for the device.

Alternatively:Login as an adminstrative user.
First, download the latest driver. Then do the next steps.
Click Start Menu
Click Control Panel
Click Hardware and Sound
Click Device Manager (the last link under Devices and Printers)
Find the device you are trying to uninstall by expanding the appropriate set of devices
Right click the device
Click Uninstall (do not click OK in the dialog box that pops up after hitting Uninstall)
Put a tick in Delete driver software for this device (if this option is available, otherwise just hit OK) and hit OK
Restart your computer only if Windows asks you to.
Install the latest driver for the device.
Also, some of your crashes are indicating hard disk related problems. It may just be hard disk corruption, or maybe your hard disk was disconnected during transit.

The first thing to check is whether the hard disk is physically connected to the motherboard properly. To do so:Shut down and turn off the computer
Remove the AC Adapter
Remove the battery
Hold down the power button for 15-30 seconds to close the circuit and drain any residual power
Remove the panel on the underside of the laptop where the hard disk is housed
Remove and re-insert the hard disk by sliding it away from the connector and then gently but firmly pressing it back into the connector (no screws should need to be removed to do this step)
Replace the panel on the underside of the laptop to cover the hard disk
Replace the battery
Replace the AC Adapter
Turn on the computer and see how it responds
Post back once these steps have been implemented whether the system is stable. Sometimes these crashes can occur due to a loose connection.
Then run Disk Check with Automatically fix file system errors checked.

http://www.sevenforums.com/bsod-help-support/236905-multiple-bsod-almost-always-caused-ntoskrnl-exe-7cc40.html
Relevancy 85.57%

Hello! I've been recieving reoccurring BSODs from 3d gaming. BlueScreenView reports that I've been getting ntoskrnl+7cc40. The bug check string is usually DRIVER_IRQL_NOT_LESS_OR_EQUAL, IQRL_NOT_LESS_OR_EQUAL, PAGE_FAULT_IN_NON_PAGED_AREA, and KMODE_EXCEPTION_NOT_HANDLED. I have tried updating all of my drivers, sfc /scannow, and chkdsk. None seems to work. I'm running a HP Pavilion dv4-2145dx, that's about 2-3 years old.

Specs:
- Windows 7 Home Premium 64bit (OEM)
- AMD Turion(tm) II Dual-Core Mobile M520
- ATI Mobility Radeon 4200 Series
- 4gb ram

attached is my bsod dmp and system file collection
Please help! thanks in advance!

A:Constant BSOD from 3d gaming, ntoskrnl+7cc40

Possible out of date drivers:
Code:
iirsp fffff880`01558000 fffff880`01569000 Tue Dec 13 14:47:54 2005 (439f418a) 00019fb9 iirsp.sys
nfrd960 fffff880`016cf000 fffff880`016df000 Tue Jun 06 15:11:48 2006 (4485ef94) 0000ffcb nfrd960.sys
adpu320 fffff880`01200000 fffff880`0122f000 Tue Feb 27 17:04:15 2007 (45e4c6ff) 0003588d adpu320.sys
adpahci fffff880`01397000 fffff880`013ed000 Tue May 01 11:30:09 2007 (46377921) 00058e0f adpahci.sys
arc fffff880`0149d000 fffff880`014b6000 Thu May 24 15:27:55 2007 (4656035b) 00017fb4 arc.sys
SiSRaid2 fffff880`019dd000 fffff880`019eb000 Wed Sep 24 12:28:20 2008 (48da86c4) 00011d5d SiSRaid2.sys
sisraid4 fffff880`01800000 fffff880`01818000 Wed Oct 01 15:56:04 2008 (48e3f1f4) 0001ec6b sisraid4.sys
adp94xx fffff880`0131c000 fffff880`01397000 Fri Dec 05 16:54:42 2008 (4939bf42) 0007c740 adp94xx.sys
lsi_fc fffff880`01569000 fffff880`01588000 Tue Dec 09 15:46:09 2008 (493ef531) 0001dc09 lsi_fc.sys
arcsas fffff880`014b6000 fffff880`014d1000 Wed Jan 14 12:27:37 2009 (496e3ca9) 0001f176 arcsas.sys
ql2300 fffff880`01839000 fffff880`019dd000 Thu Jan 22 16:05:06 2009 (4978fba2) 0017acdb ql2300.sys
vsmraid fffff880`01769000 fffff880`01793000 Fri Jan 30 18:18:57 2009 (4983a701) 00028def vsmraid.sys
elxstor fffff880`014d1000 fffff880`01558000 Tue Feb 03 15:52:11 2009 (4988ca9b) 0008214f elxstor.sys
stexstor fffff880`01818000 fffff880`01822000 Tue Feb 17 16:03:36 2009 (499b4248) 0000b026 stexstor.sys
hamachi fffff880`047f5000 fffff880`04800000 Thu Feb 19 03:36:41 2009 (499d3639) 0000a5d7 hamachi.sys
amdsbs fffff880`0144b000 fffff880`01492000 Fri Mar 20 12:36:03 2009 (49c3e213) 0003938a amdsbs.sys
lsi_scsi fffff880`0159b000 fffff880`015ba000 Thu Apr 16 16:13:50 2009 (49e7ad9e) 0002a7b5 lsi_scsi.sys
HpqKbFiltr fffff880`04a7f000 fffff880`04a8b000 Wed Apr 29 07:48:30 2009 (49f85aae) 00006ec8 HpqKbFiltr.sys
AtiPcie fffff880`02050000 fffff880`02058000 Tue May 05 09:00:22 2009 (4a005486) 000134c7 AtiPcie.sys
Apfiltr fffff880`04400000 fffff880`0443f000 Tue May 12 03:38:59 2009 (4a0943b3) 0003ca71 Apfiltr.sys
GEARAspiWDM fffff880`04a46000 fffff880`04a53000 Mon May 18 06:17:04 2009 (4a1151c0) 000159b4 GEARAspiWDM.sys
lsi_sas fffff880`01033000 fffff880`01050000 Mon May 18 18:20:23 2009 (4a11fb47) 000230a6 lsi_sas.sys
lsi_sas2 fffff880`01588000 fffff880`0159b000 Mon May 18 18:31:48 2009 (4a11fdf4) 0002002e lsi_sas2.sys
megasas fffff880`015ba000 fffff880`015c6000 Mon May 18 19:09:46 2009 (4a1206da) 000169a1 megasas.sys
ql40xx fffff880`0170a000 fffff880`01769000 Mon May 18 19:18:11 2009 (4a1208d3) 00029201 ql40xx.sys
MegaSR fffff880`0162b000 fffff880`016cf000 Mon May 18 19:25:54 2009 (4a120aa2) 00052e51 MegaSR.sys
Rt64win7 fffff880`04a0d000 fffff880`04a46000 Fri May 22 08:52:30 2009 (4a16bc2e) 00041606 Rt64win7.sys
enecir fffff880`045d9000 fffff880`045f6000 Sun Jun 28 20:17:30 2009 (4a48243a) 00019675 enecir.sys
iirsp.sys
nfrd960.sys
adpu320.sys
adpahci.sys
arc.sys
SiSRaid2.sys
sisraid4.sys
adp94xx.sys
lsi_fc.sys
arcsas.sys
ql2300.sys
vsmraid.sys
elxstor.sys
stexstor.sys
hamachi.sys
amdsbs.sys
lsi_scsi.sys
HpqKbFiltr.sys
AtiPcie.sys
Apfiltr.sys
GEARAspiWDM.sys
lsi_sas.sys
lsi_sas2.sys
megasas.sys
ql40xx.sys
MegaSR.sys
Rt64win7.sys
enecir.sys



Code:

Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [D:\Kingston\BSODDmpFiles\Vimicry\Windows7_Vista_jcgriff2\030712-31340-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Machine Name:
Kernel base = 0xfffff800`03257000 PsLoadedModuleList = 0xfffff800`0349c670
Debug session t... Read more

http://www.sevenforums.com/bsod-help-support/218102-constant-bsod-3d-gaming-ntoskrnl-7cc40.html
Relevancy 84.71%

Periodic BSOD about 2 times / day starting about 3 weeks ago.

Updated some out of date drivers last night but More BSOD today (although they look to be differnt errors)

Dump attached

A:BSOD when not in use (win7sp1_gdr.110622-1506) x64 ntoskrnl.exe+7cc40

mmb - used to get exactly what you are describing for weeks and weeks. If you have not made any other radical changes to the system, first try reseating all memory first then if you have more than 1 module, take one out and run with the other(s) until you find the culprit, turned out that one of my modules was bad - I just changed both and now no more BSODs. Used to drive me crazy !! Worth a try.

http://www.sevenforums.com/bsod-help-support/193104-bsod-when-not-use-win7sp1_gdr-110622-1506-x64-ntoskrnl-exe-7cc40.html
Relevancy 84.71%

Hi there,

I recently received my new rig (Alienware M14X), and have had persistent problems with it.

The main issue is that I get a BSOD every time I plug out the USB 2.0 cable running from my laptop to my Dell monitor, or sometimes when shutting the machine down.

I've tracked the error back to an issue with ntoskrnl.exe (+7cc40), but I also know this is quite a general issue.

I have tried multiple solutions (driver updating, etc), and System Restore seemed to solve this for a while, but it's happening again.

I've attached my .dmp files, and would love if someone could help on this.

Ivan

A:BSOD when removing USB 2.0 cable or shutting down, ntoskrnl.exe+7cc40

It's a hardware problem concerning the drivers for a camera connected to the computer made by Creative maybe a webcam or something of that nature. If you have a webcam please update the drivers or software for it from here: Creative Worldwide Support

Please fill in the rest of your system specs using the tool attached to this thread it will help us get better help for you.


Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [D:\Downloads\ivan\092111-27549-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*F:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Machine Name:
Kernel base = 0xfffff800`0301a000 PsLoadedModuleList = 0xfffff800`0325f670
Debug session time: Tue Sep 20 19:59:40.350 2011 (UTC - 6:00)
System Uptime: 0 days 4:05:52.224
Loading Kernel Symbols
...............................................................
................................................................
.......................................................
Loading User Symbols
Loading unloaded module list
...............
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {0, 2, 0, fffff8000309ad75}

Unable to load image \SystemRoot\system32\DRIVERS\CtClsFlt.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for CtClsFlt.sys
*** ERROR: Module load completed but symbols could not be loaded for CtClsFlt.sys
Probably caused by : CtClsFlt.sys ( CtClsFlt+156b )

Followup: MachineOwner
---------

6: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: 0000000000000000, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff8000309ad75, address which referenced memory

Debugging Details:
------------------
READ_ADDRESS: GetPointerFromAddress: unable to read from fffff800032c9100
0000000000000000

CURRENT_IRQL: 2

FAULTING_IP:
nt!KeSetEvent+1e3
fffff800`0309ad75 488b00 mov rax,qword ptr [rax]

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

BUGCHECK_STR: 0xA

PROCESS_NAME: System

TRAP_FRAME: fffff880037704a0 -- (.trap 0xfffff880037704a0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000000 rbx=0000000000000000 rcx=fffffa800c263a98
rdx=0000000000000001 rsi=0000000000000000 rdi=0000000000000000
rip=fffff8000309ad75 rsp=fffff88003770630 rbp=0000000000000000
r8=0000000000000000 r9=00000000000000a0 r10=00000... Read more

http://www.sevenforums.com/bsod-help-support/187959-bsod-when-removing-usb-2-0-cable-shutting-down-ntoskrnl-exe-7cc40.html
Relevancy 84.71%

Hi there, I have been having a long term issue with BSOD. I initially fixed my first string of BSODs due to my ram sticks being in the wrongs slots. That fixed it for about 3 months. But I just recently bought a new video card. GeForce GTX560ti. My older card being ati radeon 4850. I updated my drivers the other night to a beta driver for the Battlefield 3 beta. That is when I noticed 2 BSODs in 1 day. I'm attaching my mini dump folder in hopes that maybe I can find some technical support as I am not the most knowledgeable on computers. Any help will be grateful.
 

A:BSOD - 2 different Address : ntoskrnl.exe+7cc40 + anthrx.sys+5c8c1

Howdy,

Probably caused by : athrx.sys

Atheros network adapter driver

Try seeing if there are any updates for it.
 

https://forums.techguy.org/threads/bsod-2-different-address-ntoskrnl-exe-7cc40-anthrx-sys-5c8c1.1021685/
Relevancy 84.71%

Hi I recently built a new rig for my friend using all brand new components and used ESD precautions throughout After a couple of days he called to say getting Blue Screens of Death He lives a little way away from me so I remoted in and installed Nirsoft Blue Screen View I have both attached and copied and pasted details from the crashes If I need the Mini Solved: Almost Crash : - Address Always BSOD ntoskrnl.exe+7cc40 Dump files I can get those I ran Memtest for half hour and no errors were detected - any ideas ------------ Dump File - - Solved: BSOD - Almost Always Crash Address : ntoskrnl.exe+7cc40 dmp Crash Time Bug Check String SYSTEM SERVICE EXCEPTION Bug Check Code x b Parameter c Parameter fffff c b Parameter fffff cc fd Parameter Caused By Driver ntoskrnl exe Solved: BSOD - Almost Always Crash Address : ntoskrnl.exe+7cc40 Caused By Address ntoskrnl exe cc File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win sp gdr - Processor x Crash Address ntoskrnl exe cc Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time Bug Check String NTFS FILE SYSTEM Bug Check Code x Parameter c a Parameter Parameter Parameter Caused By Driver Ntfs sys Caused By Address Ntfs sys d File Description Product Name Company File Version Processor x Crash Address ntoskrnl exe cc Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time Bug Check String NTFS FILE SYSTEM Bug Check Code x Parameter fb Parameter fffff a Parameter fffff e Parameter fffff f Caused By Driver Ntfs sys Caused By Address Ntfs sys a File Description Product Name Company File Version Processor x Crash Address ntoskrnl exe cc Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time Bug Check String BAD POOL HEADER Bug Check Code x Parameter Parameter fffff c d Parameter b Parameter b Caused By Driver win k sys Caused By Address win k sys c File Description Product Name Company File Version Processor x Crash Address ntoskrnl exe cc Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time Bug Check String SYSTEM SERVICE EXCEPTION Bug Check Code x b Parameter c Parameter fffff d a Parameter fffff ad d c Parameter Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe cc File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win sp gdr - Processor x Crash Address ntoskrnl exe cc Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time Bug Check String MEMORY MANAGEMENT Bug Check Code x a Parameter Parameter fffffa fc d Parameter ffff Parameter Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe cc File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win sp gdr - Processor x Crash Address ntoskrnl exe cc Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time Bug Check String SYSTEM SERVICE EXCEPTION Bug Check Code x b Parameter c Parameter fffff Parameter fffff e Parameter Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe cc File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win sp gdr - Processor x Crash Address nto... Read more

A:Solved: BSOD - Almost Always Crash Address : ntoskrnl.exe+7cc40

https://forums.techguy.org/threads/solved-bsod-almost-always-crash-address-ntoskrnl-exe-7cc40.1020658/
Relevancy 83.85%

Hello my laptop is a HP dv originally with vista x OEM upgraded to seven pro x RETAIL with accademy program Upgrade done a year ago NEVER a problem never a BSOD Basically never problem with my laptot My (?) PC after caused random start by specially BSOD ntoskrnl.exe+7cc40 hardware is old but i never have problems with it I replaced only power charger and battery I'm random BSOD caused by ntoskrnl.exe+7cc40 (?) specially after start PC unable to run System Health Report with perfmon random BSOD caused by ntoskrnl.exe+7cc40 (?) specially after start PC report because i receive a timeout error doing it but i see that on C PerfLogs System Diagnostics i've all reports that i tried to do I'll attach it and also minidump folder Using Blue screen view i saw that BSOD SYSTEM SERVICE EXCEPTION are always caused by ntoskrnl exe File di Dump - - dmp Data e Ora del Crash Bug Check String SYSTEM SERVICE EXCEPTION Bug Check Code x b Parametro c Parametro fffff Parametro fffff c ea Parametro Causato Da Driver ntoskrnl exe Causato Da Indirizzo ntoskrnl exe cc Descrizione del File NT Kernel amp System Nome del Prodotto Microsoft Windows Operating System Societ Microsoft Corporation Versione del File win sp gdr - Processore x Crash Address ntoskrnl exe cc Stack Address Stack Address Stack Address Nome Computer Percorso completo C Windows Minidump - - dmp Processori Versione maggiore Versione minore Dimensioni file Dump I need help Thanks you

A:random BSOD caused by ntoskrnl.exe+7cc40 (?) specially after start PC

> Your crash was related to oodivd.sys DiskImage Virtual Disk Driver (Win32) from O&O Software GmbH dated 2/2009
Suggest you remove it to test.
NB, if critical update to newest
> Please remove any CD visualization programs such as Daemon Tools and Alcohol 120%.

They use a driver, found in your dmp, called sptd.sys, that is notorious for causing BSODs.

Use this SPTD uninstaller DuplexSecure - Downloads DuplexSecure - FAQ

On completion you can use this Freeware:

MagicISO Virtual CD/DVD-ROM (MagicDisc) in its place

Using MagicISO to create ISO image files

http://www.sevenforums.com/bsod-help-support/212682-random-bsod-caused-ntoskrnl-exe-7cc40-specially-after-start-pc.html
Relevancy 83.85%

I keep getting a random BSOD, I get it a lot in Lightroom 3 but have gotten the same error doing nothing.

*** STOP: 0x00000124 (0x0000000000000000, 0xfffffa80053d5028, 0x00000000b2000040,
0x0000000000000800)
*** hal.dll - Address 0xfffff80002c15a3b base at 0xfffff80002c03000 DateStamp
0x4ce7c669

Minidump is attached

A:BSOD random error 0x00000124, hal.dll at address ntoskrnl.exe+7cc40

Windows 7
4 GB ram
Intel Q9450
Gigabit MB
Raptor HD

Full data is now attached

http://www.sevenforums.com/bsod-help-support/201400-bsod-random-error-0x00000124-hal-dll-address-ntoskrnl-exe-7cc40.html
Relevancy 83.85%

Hello,

I constantly have BSOD's... when i watch the movie (avi, mkv) in any player (GOM, MPC-HC, Splash Pro...) and when i browsing internet (Firefox, Opera, Chrome, IE9).

I reinstalled Windows twice, even buy PCI network adapter, still same problem...
Already ran Memtest (6 passes 0 errors) and few of this dump files are when i ran Driver Verifier.

And yes, this problem started when i installed Service Pack 1, i don't know is that relevant..

My specs:
Asrock A770DE+
4 GB DDR2 Kingmax
MSI GTX460 Hawk
AMD Phenom ll X4 B50
Windows 7 Ultimate x64 SP1
Microsoft Security Essentials

Everything is in attachment.
Any help on this issue would be much appreciated.

Thank you in advance!

A:Random BSOD's, error 0x0000001e, 0a, caused by ntoskrnl.exe+7cc40

  
Quote: Originally Posted by zvone07


Hello,

I constantly have BSOD's... when i watch the movie (avi, mkv) in any player (GOM, MPC-HC, Splash Pro...) and when i browsing internet (Firefox, Opera, Chrome, IE9).

I reinstalled Windows twice, even buy PCI network adapter, still same problem...
Already ran Memtest (6 passes 0 errors) and few of this dump files are when i ran Driver Verifier.

And yes, this problem started when i installed Service Pack 1, i don't know is that relevant..

My specs:
Asrock A770DE+
4 GB DDR2 Kingmax
MSI GTX460 Hawk
AMD Phenom ll X4 B50
Windows 7 Ultimate x64 SP1
Microsoft Security Essentials

Everything is in attachment.
Any help on this issue would be much appreciated.

Thank you in advance!


8 different causes most pointing to hardware. If you are overclocking stop.

Please run these two tests to verify your memory and find which driver is causing the problem.
1-Memtest.

*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

RAM - Test with Memtest86+

2-Driver verifier






Quote:
I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.


Driver Verifier - Enable and Disable

http://www.sevenforums.com/bsod-help-support/194859-random-bsods-error-0x0000001e-0a-caused-ntoskrnl-exe-7cc40.html
Relevancy 82.99%

I frequently get BSOD's at the same crash address (ntoskrnl.exe+7cc40) but with different bug strings:

IRQL_NOT_LESS_OR_EQUAL
SYSTEM_SERVICE_EXCEPTION
PAGE_FAULT_IN_NONPAGED_AREA
KMODE_EXCEPTION_NOT_HANDLED

I usually get it while actively using my computer. I have tried to reinstall windows but it still happens as well as updated all drivers. I have run memtest overnight with no issues as well. I have also reseated all my memory and video card as well.

OS: Windows 7 Premium x64
CPU: AMD Phenom?II X6 1100T Six-Core CPU w/ HyperTransport Technology
VIDEO: AMD Radeon HD 6950 2GB GDDR5 16X PCIe Video Card [+152] (Major Brand Powered by AMD)

Thank you so much for your help! I am grateful that there are experts that are willing to help out with computer issues.

Thanks,

Lam

A:BSOD while watching streams or playing video games, ntoskrnl.exe+7cc40

New crashes are attached. Does anybody have any fixes?

Thanks a ton!

http://www.sevenforums.com/bsod-help-support/202104-bsod-while-watching-streams-playing-video-games-ntoskrnl-exe-7cc40.html
Relevancy 76.11%

hello forum i just wanted to share the findings regarding my BSOD error symptoms to get assistance with troubleshooting you should follow the instructions given in http www sevenforums com crashes-d tructions html however as very basic initial steps i personally prefer this approach create a bootable CD for memtest from Memtest - Advanced Memory Diagnostic Tool and let it run for hours if there is just one single error it means your memory is definitely bad if there are no errors your memory is quot most likely quot OK get a copy of BlueScreenView from NirSoft - freeware utilities password recovery system utilities desktop utilities to easily read the crash dumps on my system i was getting sporadic BSOD crashes - each time random stop codes including DRIVER IRQL NOT LESS OR EQUAL IRQL NOT LESS OR EQUAL KMODE EXCEPTION NOT HANDLED MEMORY MANAGEMENT PAGE FAULT IN NONPAGED AREA PFN [SOLVED] BSOD "ntoskrnl.exe+7cc40" random around LIST CORRUPT POOL CORRUPTION IN FILE AREA SYSTEM SERVICE EXCEPTION SYSTEM THREAD EXCEPTION NOT HANDLED i wasn't able to make out any pattern the only thing in common was the crash address that would always be quot ntoskrnl exe cc quot in many cases the crash dumps will indicate a particular driv r to be causing the trouble but with my system this was not the case by coincidence i had identified a pattern how to reproduce a BSOD by doing certain actions in a pre-defined sequence so this would allow me to proceed with systematic troubleshooting in the end it turned out [SOLVED] random BSOD around "ntoskrnl.exe+7cc40" i was using some defective RAM - or quot strange quot RAM at least it took me quite a while because [SOLVED] random BSOD around "ntoskrnl.exe+7cc40" of the following reasons BSOD seemed to occur randomly sporadically BSOD was showing random stop codes memtest did not show any erros conclusion i would recommend the following approach use memtest to check if there are any quot obvious quot errors with your RAM use BlueScreenView to check if any device driv r seems to be causing the error in case you're getting quot random quot errors like me as outlined above take one more closer look at your RAM in case this still doesn't get you any further follow the posting [SOLVED] random BSOD around "ntoskrnl.exe+7cc40" instructions to attach the required files the guys on this forum are doing a great job and will most likely be able to point you in the right direction for additional troubleshooting cheers francoiste

A:[SOLVED] random BSOD around "ntoskrnl.exe+7cc40"

my memory was showing these strange symptoms due to physical damage.
please see the <attached picture>.

if you look at the photograph it appears just so obvious.
but believe me, you won't detect it with your bare eyes.
you need either a magnifying glass or (as in my case) a high-end photographic camera with super zoom.

note: i'm not sure if this damage was there right from the beginning (DOA) or caused by my excessive testing (adding, removing, swapping the memory modules endless times).

anyhow,
so what's the message?

first: be very careful when inserting your memory modules into the slots.
some brands / modules don't have a very robust design, obviously.

second: the scary part is that neither memtest nor windows detected any errors when doing a memory validation.
the only visible symptoms: the physical damage led to sporadic errors (blue screens) during regular operation.
so it's still very difficult to tell whether a memory module is 100% OK or just 99% OK ...
cheers, francoiste

http://www.sevenforums.com/bsod-help-support/190800-solved-random-bsod-around-ntoskrnl-exe-7cc40.html
Relevancy 71.81%

HI

I have been experiencing DRIVER_POWER_STATE_FAILURE crashes lately caused by ntoskrnl.exe.

I originally thought I would reinstall W7 but that has not fixed the issue

I am using OEM W7 Professional x64

The CPU is a i7 2600
The PC is only no more than 2 yrs old.
I d have an old Canon scanner LiDE 100 that I expect is causing the problem. The PC was working fine for over a year until NOv 2011 and then started crashing. I reinstallled W7 all seamed to be fine util I loaded the software for the scanner. I have loaded the latest software from the canon site.

I hope some one can some one help me?
If it is the driver for the scanner, why now?
Cheers
Craig

A:Help with DRIVER_POWER_STATE_FAILURE, caused by ntoskrnl.exe+7cc40

I'm running a Dec, a Jan, and a Feb 2012 memory dump.

Atheros AR3011 Bluetooth (no firmware) device isn't installed. Please download and install the drivers from the PC Manufacturer's website.

The BSOD's blame the disks connected to your Marvell controller. This means that it's either the disk or the controller. To test the controller, switch the disks to another controller (most Asus boards have 2) and see if that helps. Don't forget to update the controller drivers. If any of the drives fail, backup your data IMMEDIATELY! There's no telling when the drive will fail.

To test the disk, start with these free diagnostics: HD Diagnostic
Test ALL hard drives!

Further info on BSOD error messages available at: http://www.carrona.org/bsodindx.html

The following info is just FYI, I've already addressed the issues that I saw in the above paragraphs:
3RD PARTY DRIVERS PRESENT IN THE DUMP FILES
- Create a System Restore Point prior to doing any of this. DO NOT mess with the drivers themselves - leave the Windows\System32\drivers directory alone unless we specifically direct you to it!
- Please either update the older drivers from the device manufacturer's website - or uninstall them from your system. Reference links are included below.
- DO NOT use Windows Update or the Update Drivers function of Device Manager.
- Please feel free to post back about any drivers that you are having difficulty locating.
- Windows Update exceptions may be noted below for Windows drivers.

Code:

nvhda64v.sys Thu Nov 11 18:10:36 2010 (4CDC77EC)
iaStor.sys Sat Nov 06 03:44:52 2010 (4CD50774)
nusb3hub.sys Thu Sep 30 00:00:03 2010 (4CA40B43)
mv91xx.sys Fri Aug 27 05:49:22 2010 (4C778A22)
mvxxmm.sys Fri Aug 27 05:49:03 2010 (4C778A0F)
amdxata.sys Fri Mar 19 12:18:18 2010 (4BA3A3CA)
aswTdi.SYS Mon Nov 28 12:52:18 2011 (4ED3CA52)
aswSnx.SYS Mon Nov 28 12:54:05 2011 (4ED3CABD)
dump_mvxxmm.sys Fri Aug 27 05:49:03 2010 (4C778A0F)
aswRdr.SYS Mon Nov 28 12:52:20 2011 (4ED3CA54)
ElbyCDIO.sys Thu Dec 16 17:58:13 2010 (4D0A9985)
aswSP.SYS Mon Nov 28 12:53:57 2011 (4ED3CAB5)
GEARAspiWDM.sys Mon May 18 08:17:04 2009 (4A1151C0)
HECIx64.sys Tue Oct 19 19:33:43 2010 (4CBE2AD7)
aswMonFlt.sys Mon Nov 28 12:52:10 2011 (4ED3CA4A)
aswFsBlk.SYS Mon Nov 28 12:51:52 2011 (4ED3CA38)
RTKVHD64.sys Tue Nov 02 07:25:59 2010 (4CCFF547)
dump_mv91xx.sys Fri Aug 27 05:49:22 2010 (4C778A22)
Rt64win7.sys Mon Oct 25 05:33:07 2010 (4CC54ED3)
nvlddmkm.sys Sat May 21 00:07:04 2011 (4DD73A68)
nvBridge.kmd Fri May 20 23:58:23 2011 (4DD7385F)
nusb3xhc.sys Thu Sep 30 00:00:03 2010 (4CA40B43)
AnyDVD.sys Sun Dec 04 16:23:55 2011 (4EDBE4EB)
nvlddmkm.sys Wed Feb 23 22:01:34 2011 (4D65CA0E)
nvBridge.kmd Wed Feb 23 21:57:02 2011 (4D65C8FE)

http://www.carrona.org/drivers/driver.php?id=nvhda64v.sys
http://www.carrona.org/drivers/driver.php?id=iaStor.sys
http://www.carrona.org/drivers/driver.php?id=nusb3hub.sys
http://www.carrona.org/drivers/driver.php?id=mv91xx.sys
http://www.carrona.org/drivers/driver.php?id=mvxxmm.sys
http://www.carrona.org/drivers/driver.php?id=amdxata.sys
http://www.carrona.org/drivers/driver.php?id=aswTdi.SYS
http://www.carrona.org/drivers/driver.php?id=aswSnx.SYS
http://www.carrona.org/drivers/driver.php?id=dump_mvxxmm.sys
http://www.carrona.org/drivers/driver.php?id=aswRdr.SYS
http://www.carrona.org/drivers/driver.php?id=ElbyCDIO.sys
http://www.carrona.org/drivers/driver.php?id=aswSP.SYS
http://www.carrona.org/drivers/driver.php?id=GEARAspiWDM.sys
http://www.carrona.org/drivers/driver.php?id=HECIx64.sys
http://www.carrona.org/drivers/driver.php?id=aswMonFlt.sys
http://www.carrona.org/drivers/driver.php?id=aswFsBlk.SYS
http://www.carrona.org/drivers/driver.php?id=RTKVHD64.sys
http://www.carrona.org/drivers/driver.php?id=dump_mv91xx.sys
http://www.carrona.org/drivers/driver.php?id=Rt64win7.sys
http://www.carrona.org/drivers/driver.php?id=nvlddmkm... Read more

http://www.sevenforums.com/bsod-help-support/215012-help-driver_power_state_failure-caused-ntoskrnl-exe-7cc40.html
Relevancy 71.81%

Hey guys, just awhile ago I got the random BSOD PFN_LIST_CORRUPT caused by a ntoskrnl.exe+7cc40
I think it's a RAM issue, but I'm not sure

I'm pretty computer illiterate, so sorry if I'm slow or anything

Edit: Didn't see sticky, really sorry. Doing as listed right now.

A:PFN_LIST_CORRUPT caused by ntoskrnl.exe+7cc40

Can't edit post twice within 15 mins so I'll just post this
Updated attachments and Info

Windows 7, x64
Original OS
OEM
Just got the laptop about a year ago
I just formatted the system after a virus I couldn't be bothered to deal with. But I guess a year as well.

Intel(R) Core(TM) i3 CPU M 380 @ 2.53GHz, 2533 Mhz, 2 Core(s), 4 Logical Processor(s)
Don't know what kind of motherboard it has or what kind of specific battery it's using.

ASUSTeK
Model:U52F
MB Ver:U53F
"U52f-BBG6" is also some other info my laptop says.

http://www.techsupportforum.com/forums/f299/pfn_list_corrupt-caused-by-ntoskrnl-exe-7cc40-631621.html
Relevancy 70.95%

Very frequents BSODs mostly drivers various 50, BSODs BCCode always ntoskrnl.exe+7cc40 but with BCCode but also BCCode in about a to ratio various quot caused by quot addresses but quot crash address quot always ntoskrnl exe cc as viewed with BlueScreenView FIRST thing I want to know given that of maybe BSODs all have the same quot crash address quot is my presumption that this provides no information relevant and revelatory in my situation correct Perhaps all BSODs with BCCode and b terminate with the same quot crash address quot SECOND thing I want to know is which column in the BlueScreenView may contain information that I can begin to do something about I searched on some keywords in this forum and hit upon several similar posts but enough different that BSODs with BCCode 50, various drivers but always ntoskrnl.exe+7cc40 I believe I could benefit from replies unique to those two questions above BTW because I read somewhere that RAM could be involved in cases of BCCode I have run the extended RAM pre-boot assessment a couple of times and PC Check of memory with lots of walking this-and-that and ran the whole suite of checks with all quot passed quot

A:BSODs with BCCode 50, various drivers but always ntoskrnl.exe+7cc40

Please upload a report

http://www.sevenforums.com/crashes-d...tructions.html

http://www.sevenforums.com/bsod-help-support/217171-bsods-bccode-50-various-drivers-but-always-ntoskrnl-exe-7cc40.html
Relevancy 70.52%

Hello since some time I got occasionally BSOD and ntoskrnl.exe, ntkrnlmp.exe Frequent BSOD, since this Sunday very frequent Background Last Sunday I start troubleshoot long time pending issue with my USB controller VIA VL chipset that I had since its installation in Dec error Code The device cannot start I found and installed new driver from VIA V A WHQL There was no success still the same error I also changed SATA mode for my SSD disks from IDE to AHCI using microsoft procedure and tool from Error message occurs after you change the SATA mode of the boot drive Since this change USB controller started to work Then I wanted to make backup via Windows embedded Backup amp Restore tool and got few seconds after starting backup BSOD Since then many BSODs looked like when there was some operation with extenal USB disk some Frequent BSOD, ntoskrnl.exe, ntkrnlmp.exe times not possible to boot because order of bootable disk has been changed in BIOS I do not understand how it is possible w o entering into BIOS So I removed USB controller completely from PC including deinstallation of driver controller was in PC months I reverted back AHCI to IDE in BIOS but did not change back value for HKEY LOCAL MACHINE System CurrentControlSet Servic es msahci to but problems with frequent BSOD are still there I googled and read many forums advices and finally arrived here Can you pls help and give me advice what to do I want avoid new Win install if possible

A:Frequent BSOD, ntoskrnl.exe, ntkrnlmp.exe

And now another BSOD, logs attached

http://www.sevenforums.com/bsod-help-support/266619-frequent-bsod-ntoskrnl-exe-ntkrnlmp-exe.html
Relevancy 70.52%

Hi,

I have a system with Win 7 64bit Home Premium and very frequently I'm having BSOD's and the system rebooting afterwards. I have updated all the drivers and ran Windows update but the problem still persists.

Any help would be appreciated. Attached the minidump file

Thanks

A:Win7 64 bit with frequent BSOD - ntoskrnl.exe

It appears that all of them are more or less the same. They all have the same bug check code at least.

There is a update, KB 979762, that you should install that might solve it.

The dump files were not very descriptive, unfortunately. If you are OCing, STOP. Update drivers (as you have done), and open an elevated command prompt (right click, run as admin) and type sfc /scannow


Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\David\AppData\Local\Temp\Temp6_Minidump.zip\Minidump\072510-25506-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Machine Name:
Kernel base = 0xfffff800`02e01000 PsLoadedModuleList = 0xfffff800`0303ee50
Debug session time: Sun Jul 25 19:57:29.246 2010 (UTC - 7:00)
System Uptime: 0 days 0:12:20.853
Loading Kernel Symbols
...............................................................
................................................................
..............................
Loading User Symbols
Loading unloaded module list
......
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 7F, {10, 80050033, 6f8, 71f2a03e}

Probably caused by : ntkrnlmp.exe ( nt!KiFloatingErrorFault+16a )

Followup: MachineOwner
---------

2: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

UNEXPECTED_KERNEL_MODE_TRAP (7f)
This means a trap occurred in kernel mode, and it's a trap of a kind
that the kernel isn't allowed to have/catch (bound trap) or that
is always instant death (double fault). The first number in the
bugcheck params is the number of the trap (8 = double fault, etc)
Consult an Intel x86 family manual to learn more about what these
traps are. Here is a *portion* of those codes:
If kv shows a taskGate
use .tss on the part before the colon, then kv.
Else if kv shows a trapframe
use .trap on that value
Else
.trap on the appropriate frame will show where the trap was taken
(on x86, this will be the ebp that goes with the procedure KiTrap)
Endif
kb will then show the corrected stack.
Arguments:
Arg1: 0000000000000010, EXCEPTION_NPX_ERROR
Arg2: 0000000080050033
Arg3: 00000000000006f8
Arg4: 0000000071f2a03e

Debugging Details:
------------------
BUGCHECK_STR: 0x7f_10

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VERIFIER_ENABLED_VISTA_MINIDUMP

PROCESS_NAME: iexplore.exe

CURRENT_IRQL: 0

LAST_CONTROL_TRANSFER: from fffff80002e70b69 to fffff80002e71600

STACK_TEXT:
fffff880`0aebcad8 fffff800`02e70b69 : 00000000`0000007f 00000000`00000010 00000000`80050033 00000000`000006f8 : nt!KeBugCheckEx
fffff880`0aebcae0 fffff800`02e6faaa : fffffa80`05e5cb60 00000000`00001024 fffff880`0aebcbf8 fffffa80`0a8f1700 : nt!KiBugCheckDispatch+0x69
fffff880`0aebcc20 00000000`71f2a03e : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiFloatingErrorFault+0x16a
00000000`0e91fa6c 00000000`00000000 ... Read more

http://www.sevenforums.com/bsod-help-support/100056-win7-64-bit-frequent-bsod-ntoskrnl-exe.html
Relevancy 70.52%

Hi I've been getting Blue Screens after leaving my computer on for anything over or so hours I've had these issues for a while and I can't quite recall when I first started getting them but I believe it was around the time I put in my new video card and set ntoskrnl usb drivers and BSOD's, Frequent my ram to it's proper XMP profile Turning the XMP profile back off resulted in the same blue screens and I've also ran memtest albeit only once for hours overnight with it displaying no problems with my memory Since then I just Frequent BSOD's, ntoskrnl and usb drivers recently manually set my ram voltage properly due to noticing XMP not adjusting the voltage to it's correct setting in hopes that it might fix my problems but just last night I got another bluescreen My computer was also just built in the beginning of the year if that matters These BSOD's have happened when the computer's idle or I'm in game or just browsing the internet Since I don't have much knowledge about what causes this I've just been using BlueScreenView which has highlighted multiple issues recently ntoskrnl exe USBPORT SYS and iusb xhc sys Hopefully I've attached the files correctly

A:Frequent BSOD's, ntoskrnl and usb drivers

Your Intel USB 3.0 Extensible driver appears to be causing problems. Please update it here.

https://downloadcenter.intel.com/default.aspx

Your Nvidia graphics driver also appears to be causing some problems. Please roll back to the 334.89 version here

www.geforce.co.uk/drivers

I would try rolling back the graphics driver as it is the latest version.

Your Killer e2200 PCI-E Gigabit Ethernet Controller appears to be causing problems. Pick the Killer E2200 64bit version. Please update it here.

https://www.qca.qualcomm.com/resources/driverdownloads/

You also have a few memory references. Please run memtest86 to scan for errors. Please run for at least 8 passes.

RAM - Test with Memtest86+


Code:
Probably caused by : iusb3xhc.sys ( iusb3xhc+3203f )

Code:
fffff880`0fd23000 fffff880`0fde6000 iusb3xhc T (no symbols)
Loaded symbol image file: iusb3xhc.sys
Image path: \SystemRoot\system32\DRIVERS\iusb3xhc.sys
Image name: iusb3xhc.sys
Timestamp: Fri Mar 29 12:36:19 2013 (51558AC3)
CheckSum: 000C59AC
ImageSize: 000C3000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

Code:
Probably caused by : nvlddmkm.sys ( nvlddmkm+6b475 )

Code:
fffff880`0f036000 fffff880`0fc8e000 nvlddmkm T (no symbols)
Loaded symbol image file: nvlddmkm.sys
Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
Image name: nvlddmkm.sys
Timestamp: Tue Mar 04 11:07:52 2014 (5315B408)
CheckSum: 00C20523
ImageSize: 00C58000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

Code:
Probably caused by : e22w7x64.sys ( e22w7x64+19fa0 )

Code:
fffff880`03e00000 fffff880`03e2a000 e22w7x64 T (no symbols)
Loaded symbol image file: e22w7x64.sys
Image path: \SystemRoot\system32\DRIVERS\e22w7x64.sys
Image name: e22w7x64.sys
Timestamp: Wed Dec 05 16:43:48 2012 (50BF79C4)
CheckSum: 00035FA2
ImageSize: 0002A000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

http://www.sevenforums.com/bsod-help-support/325866-frequent-bsods-ntoskrnl-usb-drivers.html
Relevancy 70.52%

A few days ago I started having problems with my ASUS G J laptop A BSOD usually occurs after about - minutes of running Windows x I have had BSODs since it started I have no problems when it is running in safemode I have attached the pertinent info required plus a SeaTools analysis of the HDD and a photo of a completed memtest I also performed a virus scan with MSE and a full malware scan with Malwarebytes I also performed a CHKDSK r which did not fix the problem I did a cursory examination of the minidumps and noticed that all of the crash addresses come from the ntoskrnl exe file to related ntoskrnl.exe+7cc40 BSODs possibly cc file Of course I am by no means a computer expert and have no idea BSODs possibly related to ntoskrnl.exe+7cc40 file what that means so I will leave you guys the BSODs possibly related to ntoskrnl.exe+7cc40 file experts to determine the problem I have had the laptop for about a year and a half with no BSOD problems however I did reinstall Windows over the summer for some software issues This is the first kind of problem that I have had with the laptop since the reinstall Any help would be appreciated Thanks in advance OS - Vista Windows - Microsoft Windows Home Premium x -bit or x - bit What was original installed OS on system - The original OS is Microsoft Windows Home Premium x Is the OS an OEM version came pre-installed on system or full retail version YOU purchased it from retailer - This is an OEM version Age of system hardware - The system is about a year and a half old Age of OS installation - have you re-installed the OS - The OS was reinstalled during the summer around the beginning of June CPU - Intel R Core TM i CPU M GHz Intel Family Model Stepping Video Card - NVIDIA GeForce GTS M Mb MotherBoard - PEGATRON CORPORATION G JX BSN Power Supply - brand amp wattage - The input is V A W System Manufacturer - ASUS Exact model number if laptop check label on bottom - G JX Sample problem signature Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode BCP FB BCP FFFFF CB C BCP FFFFF CB BCP FFFFF B C OS Version Service Pack Product

A:BSODs possibly related to ntoskrnl.exe+7cc40 file

NOTE: I have severe eye problems. If I do not respond to your postings, please PM another staff member for assistance.

I see that SeaTools passed the Short test, but can't see if it passed the Long test. Do you know if it passed the Long test?

25 memory dumps over 3 days (13 to 15 Oct 2011)
7 different BSOD error codes
at least 5 different causes blamed
This is most likely a hardware problem - although it's possible that it's due to lower level drivers also.

Systeminfo.txt report not completed, please ensure that you have all Windows Updates:

Quote:




Installing Windows 7 Service Pack 1
1. Visit the PC manufacturer's website and update ALL drivers. DO NOT use Windows Update or the "Update drivers" function of Device Manager.
2. Check Device Manager for any unknown/disabled devices - if there are unknown/disabled devices, fix them with the latest drivers from the device manufacturer's website (not the PC Manufacturer)
3. Visit Windows Update and get all updates
4. Visit Windows Update and get Service Pack 1 (usually under Important Updates). Read these notes for installing SP1: Steps to follow before you install Windows 7 Service Pack 1 from the Microsoft Download Center
5. Visit Windows Update and get any other available updates




MSINFO32 shows a problem with SPLDR. This (at work) is usually a symptom of a virus infection. Please perform one of these independent (outside of Windows) virus scans to be sure:
Quote:




Please run one of these free, bootable antivirus disks at this link: Free Online AntiMalware Resources - Bootable Disks




Is it possible that this is left over damage from a previously removed infection?

Please uninstall the Asus Data Security Manager software as it shows up in quite a few of the BSOD's. Visit the Asus support website and download/install the latest 64 bit Win7 version of this software.

Also, the ATK0101 HOTKEY utility software dates from 2007. Please uninstall that verrsion and install the latest version available from the manufacturer's website ( ASUSTeK Computer Inc. -Support- Drivers and Download G60J ). It's under the ATK section in the downloads.

If these don't fix the problems, please post back and we'll start looking at hardware causes.

BSOD BUGCHECK SUMMARY

Code:

Loading Dump File [C:\Users\FUBAR\_jcgriff2_\dbug\__Kernel__\101511-19780-01.dmp]
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Sat Oct 15 22:03:59.880 2011 (UTC - 4:00)
System Uptime: 0 days 0:16:48.988
Probably caused by : Ntfs.sys ( Ntfs! ?? ::FNODOBFM::`string'+2b49 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: rundll32.exe
BUGCHECK_STR: 0x24
FAILURE_BUCKET_ID: X64_0x24_Ntfs!_??_::FNODOBFM::_string_+2b49
Bugcheck code 00000024
Arguments 00000000`001904fb fffff880`0b23ac48 fffff880`0b23a4a0 fffff800`032c5b65
BiosVersion = 203
BiosReleaseDate = 12/10/2009
CPUID: "Intel(R) Core(TM) i5 CPU M 430 @ 2.27GHz"
MaxSpeed: 2270
CurrentSpeed: 2266
??????????????????????????????????????????????????????????????????????????????????????``
Loading Dump File [C:\Users\FUBAR\_jcgriff2_\dbug\__Kernel__\101511-25677-01.dmp]
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Sat Oct 15 21:46:29.089 2011 (UTC - 4:00)
System Uptime: 0 days 0:16:57.572
*** WARNING: Unable to verify timestamp for AsDsm.sys
*** ERROR: Module load completed but symbols could not be loaded for AsDsm.sys
Probably caused by : AsDsm.sys ( AsDsm+19a5 )
BUGCHECK_STR: 0x1E_c0000005
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: explorer.exe
FAILURE_BUCKET_ID: X64_0x1E_c0000005_AsDsm+19a5
Bugcheck code 0000001E
Arguments ffffffff`c0000005 fffff800`032cdb65 00000000`00000000 ffffffff`ffffffff
BiosVersion = 203
BiosReleaseDate = 12/10/2009
CPUID: "Intel(R) Core(TM) i5 CPU M 430 @ 2.27GHz"
MaxSpeed: 2270
CurrentSpeed: 2266
??????????????????????... Read more

http://www.techsupportforum.com/forums/f299/bsods-possibly-related-to-ntoskrnl-exe-7cc40-file-606596.html
Relevancy 69.66%

Hello everyone I've always had this problem but it is especially bad now Recently when playing any game usually either Fallout New Vegas or Assassin's Creed II I get a BSOD within anywhere between minutes or minutes The BSOD will come up with varying messages such as IRQL NOT LESS OR playing BSOD frequent any game, ntoskrnl.exe, very while EQUAL PAGE FAULT IN NONPAGED AREA or DRIVER OVERRAN STACK BUFFER I have also on rare occasions received several others For a better idea of the BSOD while playing any game, ntoskrnl.exe, very frequent different errors I've been getting see this screenshot it is a list of BSODs I've encountered over the past month or two LINK OS Windows Ultimate -bit retail Installation about months old Mobo GA- A-UD GPU MSI GTX ti Twin Frozr OC edition CPU AMD Phenom II X ghz OC'd to ghz PSU Corsair TX- V RAM Corsair Vengeance CMZ GX M A C GB x GB DDR HDD Samsung SpinPoint F TB HD SJ The system was rebuilt only a few months ago The only aging thing in it at the moment is the DVD drive I recently removed one stick of RAM and I went about hours without a BSOD Will try playing more and seeing if it lasts as long again Things I have done to try and fix -Updated graphics drivers -Updated mobo drivers SATA and USB -Slightly increased voltage on RAM v as opposed to -Memtest both RAM chips at once will test again with each stick and slot individually when I have time Dump files attached Thankyou if you take the time to assist

A:BSOD while playing any game, ntoskrnl.exe, very frequent

Hi.

If you are overclocking anything stop.

Download and install Driver Sweeper

Download the most recent software\driver for your NVIDIA

Uninstall nvidia software\driver,restart in safe mode,run driver sweeper,choose only NVIDIA-Display and clean,restart in normal mode.

Install the new ati software\driver,restart.

Update DirectX
Run the nvidia-video-card-test
Finish with these steps and post back here the results.

http://www.sevenforums.com/bsod-help-support/193138-bsod-while-playing-any-game-ntoskrnl-exe-very-frequent.html
Relevancy 69.66%

Hello!

I've been getting BSODs usually when playing full screen games or also just randomly.

Checked my RAM with memtest and it seems ok!

DRIVER_IRQL_NOT_LESS_OR_EQUAL
BUG CHECK CODE : 0x000000d1
PARAMETER 1 : fffff880`071ec30c
PARAMETER 2 : 00000000`00000002
PARAMETER 3 : 00000000`00000008
PARAMETER 4 : fffff880`071ec30c
driver : e22w8x64.sys
address : e22w8x64.sys+2630c

ntoskrnl.exe+5a540 is also highlighted red
Would be really appreciated if somebody could help Let me know if any other information is needed!

A:Frequent BSOD (ntoskrnl.exe & e22w8x64.sys 0x000000d1)

e22w8x64.sys is your networking driver. Try updating that first.

Then, Please provide this information so we can provide a complete analysis (from the Pinned Topic at the top of the forum): Blue Screen of Death (BSOD) Posting Instructions Please use Option 1 as it provides Event Viewer logs.

If the BSOD recurs, please run Driver Verifier according to these instructions: Driver Verifier Settings

http://www.eightforums.com/bsod-crashes-debugging/54036-frequent-bsod-ntoskrnl-exe-e22w8x64-sys-0x000000d1.html
Relevancy 69.66%

Hello, Newbie here!

For the past few weeks I've been coming home to find my laptop has shut itself down. When I reboot it tells me it recovered from a blue screen.

I have not witnessed the blue screen while working--I only find it has shut down when I've been away. Fan seems to run a lot, but this might be normal. 3 year old HP Pavilion dm4 laptop running Windows 7 Home Premium 64 bit.

Attached is my error file from DM Log Collector.

Any help would be appreciated!

Wendy

A:Frequent BSOD (mostly during sleep) ntoskrnl.exe+f2124

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {fffffa80413d5178, 2, 1, fffff80002cd0fe5}

*** WARNING: Unable to verify timestamp for npf.sys
*** ERROR: Module load completed but symbols could not be loaded for npf.sys
Probably caused by : npf.sys ( npf+2bb2 )

Followup: MachineOwner
---------

1: kd> lmvm npf
start end module name
fffff880`05904000 fffff880`05910000 npf T (no symbols)
Loaded symbol image file: npf.sys
Image path: \??\C:\Windows\system32\drivers\npf.sys
Image name: npf.sys
Timestamp: Sat Jun 26 02:20:58 2010 (4C24DE72)
CheckSum: 00011844
ImageSize: 0000C000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
The problem is common on systems using a NetGear router with outdated firmware.

See this thread for the solution:
Computer Crashed when I wasn't around it.

http://www.sevenforums.com/bsod-help-support/360529-frequent-bsod-mostly-during-sleep-ntoskrnl-exe-f2124.html
Relevancy 69.66%

Hello I've been suffering computer instability for a while now - it would freeze after slowing down and going into an audio loop I was running two HD in Raid and they had issues which I thought were the root cause so I replaced them installed Windows Ultimate bit service pack It seemed to have resolved the issue (ntoskrnl.exe), can No Theme BSOD Frequent I recognize for a while and then problems started again My new HDs old one aren't connected showed errors and so I assumed it might be bad HDs though unlikely I got SSD HD and installed a fresh copy of Windows Ultimate bit including all Frequent BSOD (ntoskrnl.exe), No Theme I can recognize updates and Service Pack Recently I started getting quite frequent BSOD which were rare before Frequent BSOD (ntoskrnl.exe), No Theme I can recognize with no discernible pattern - light gaming watching a movie idle I'm clearly suspecting a hardware problem but I'm fairly sure it's not the HD as having different setups be faulty seems unlikely Actions taken Ran MemTest over night - no issues Ran Prime - no issues Stressed GPU - no issues Ran antivirus checks CHKDSK defrag Updated drivers and removed anything that I didn't need I'm concerned that it might be my mobo or PSU and I hope to get a power tester next week However if there is any chance it's faulty software that would save me a lot of time and energy Information about the computer PSU CORSAIR Frequent BSOD (ntoskrnl.exe), No Theme I can recognize CMPSU- TX W ATX V EPS V SLI Ready CrossFire Ready PLUS Certified Active PFC Compatible with Core i Power Supply Mobo ASUS P T LGA Intel X ATX Intel Motherboard CPU Intel Core i Nehalem GHz LGA W Quad-Core Processor Model BX Mem G SKILL GB x GB -Pin DDR SDRAM DDR PC Triple Channel Kit Desktop Memory Model F - CL T- GBNQ DVD SAMSUNG X DVD R DVD Burner with LightScribe Black SATA Model SH-S Q GPU SAPPHIRE - GL Radeon HD GB -bit GDDR PCI Express x HDCP Ready CrossFire Supported Video Card HDs OS SAMSUNG Series -Inch GB SATA III MLC Internal Solid State Drive SSD MZ- PC B WW Storage Western Digital Caviar Black GB SATA Desktop Internal Hard Drive RAID old drives - not connected anymore Seagate Barracuda ST AS GB RPM SATA Gb s Hard Drive Keyboard RAZER Arctosa Silver USB Wired Standard Gaming KeyboardRAZER Mouse DeathAdder RZ - -R M Black Buttons x Wheel USB Optical High Precision Gaming Mouse Mostly used for light gaming most of my games are - years old or much older than that or watching movies shows online Attaching file per instructions Please let me know if something is missing I would appreciate any help - thank you very much

A:Frequent BSOD (ntoskrnl.exe), No Theme I can recognize

Welcome aboard.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 101, {19, 0, fffff880009b2180, 4}

Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

CLOCK_WATCHDOG_TIMEOUT (101)
An expected clock interrupt was not received on a secondary processor in an
MP system within the allocated interval. This indicates that the specified
processor is hung and not processing interrupts.
Arguments:
Arg1: 0000000000000019, Clock interrupt time out interval in nominal clock ticks.
Arg2: 0000000000000000, 0.
Arg3: fffff880009b2180, The PRCB address of the hung processor.
Arg4: 0000000000000004, 0.

Debugging Details:
------------------
BUGCHECK_STR: CLOCK_WATCHDOG_TIMEOUT_8_PROC

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

PROCESS_NAME: svchost.exe

CURRENT_IRQL: d

STACK_TEXT:
fffff880`084c4468 fffff800`02adcd5a : 00000000`00000101 00000000`00000019 00000000`00000000 fffff880`009b2180 : nt!KeBugCheckEx
fffff880`084c4470 fffff800`02a8fad7 : 00000000`00000000 fffff800`00000004 00000000`00002710 00000000`00000000 : nt! ?? ::FNODOBFM::`string'+0x4e2e
fffff880`084c4500 fffff800`02ff9895 : fffff800`0301f460 fffff880`084c46b0 fffff800`0301f460 00000000`00000000 : nt!KeUpdateSystemTime+0x377
fffff880`084c4600 fffff800`02a82513 : fffff800`02bf8e80 00000000`00000001 00000000`00000001 fffff800`02a07000 : hal!HalpHpetClockInterrupt+0x8d
fffff880`084c4630 fffff800`02a5ad47 : fffffa80`054ba788 fffff800`02a81c27 fffff880`084c48a0 fffff800`02a81a01 : nt!KiInterruptDispatchNoLock+0x163
fffff880`084c47c0 fffff800`02d8b9cf : 00000000`00000000 fffff880`084c4ca0 00000000`00000000 00001f80`00390294 : nt!KeFlushProcessWriteBuffers+0x6b
fffff880`084c4830 fffff800`02d8c029 : 00000000`03729e40 fffff800`02d7807a 00000000`00000000 00000000`00000246 : nt!ExpQuerySystemInformation+0x13af
fffff880`084c4be0 fffff800`02a85253 : fffffa80`054b0000 fffffa80`07956001 ffffffff`fffe7960 000007fe`f104c000 : nt!NtQuerySystemInformation+0x4d
fffff880`084c4c20 00000000`7790167a : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
00000000`02f5f668 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x7790167a
STACK_COMMAND: kb

SYMBOL_NAME: ANALYSIS_INCONCLUSIVE

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: Unknown_Module

IMAGE_NAME: Unknown_Image

DEBUG_FLR_IMAGE_TIMESTAMP: 0

FAILURE_BUCKET_ID: X64_CLOCK_WATCHDOG_TIMEOUT_8_PROC_ANALYSIS_INCONCLUSIVE

BUCKET_ID: X64_CLOCK_WATCHDOG_TIMEOUT_8_PROC_ANALYSIS_INCONCLUSIVE

Followup: MachineOwner
---------
Follow the guide STOP 0x101: CLOCK_WATCHDOG_TIMEOUT troubleshtg .... there must be a solution for you.

http://www.sevenforums.com/bsod-help-support/262401-frequent-bsod-ntoskrnl-exe-no-theme-i-can-recognize.html
Relevancy 69.66%

Getting random and regular BSODs.

BlueScreen View suggests ntoskrnl.exe

I've attached the SF Diagnostic tool logs. If you need anything else, please let me know.
Thanks.

Specs:
CPU: Intel(R) Core(TM) i7 CPU 870 @ 2.93GHz
Mobo: Dell Inc. 054KM3
RAM: 6.00 GB
HDDs: (1) ARSSD50GBU2 ATA Device (2) OCZ-AGILITY3 ATA Device (3) ST31000528AS ATA Device Audio: (1) High Definition Audio Device (2) High Definition Audio Device (3) High Definition Audio Device (4) ASUS Xonar DG Audio Device (5) High Definition Audio Device
GPU: NVIDIA GeForce GT 220
OS: Microsoft Windows 7 Professional 64-bit 7601 Multiprocessor Free Service Pack 1

A:Frequent and seemingly random BSOD - ntoskrnl.exe

Please update the firmware for your SSD:







  
Quote: Originally Posted by writhziden


If you have an SSD, make sure the following are up to date:SSD firmware
BIOS Version
Chipset Drivers
Hard disk controller drivers/SATA drivers
If you have a Marvell IDE ATA/ATAPI device, make sure the drivers are up to date from the Intel site or Marvell site and not from your motherboard/vendor support site.




Code:
BugCheck F4, {3, fffffa8008078b30, fffffa8008078e10, fffff80002fd67b0}
Probably caused by : csrss.exe
??????????????????????????????????????????????????????????????????????????????????????``
BugCheck F4, {3, fffffa8007f31b30, fffffa8007f31e10, fffff80002f7b7b0}
Probably caused by : wininit.exe
??????????????????????????????????????????????????????????????????????????????????????``
BugCheck F4, {3, fffffa8007a096a0, fffffa8007a09980, fffff80002fe07b0}
Probably caused by : csrss.exe
??????????????????????????????????????????????????????????????????????????????????????``
BugCheck F4, {3, fffffa80078aa640, fffffa80078aa920, fffff80002fcc7b0}
Probably caused by : csrss.exe
??????????????????????????????????????????????????????????????????????????????????????``
System File CheckerThe SFC /SCANNOW Command - System File Checker scans the integrity of all protected Windows 7 system files and replaces incorrect corrupted, changed/modified, or damaged versions with the correct versions if possible. If you have modified your system files as in theming explorer/system files, running sfc /scannow will revert the system files to it's default state.Link to full tutorial: SFC /SCANNOW Command - System File Checker
Run Disk Check in Windows 7Run this on your Hard Drive(s). This will show you how to run Check Disk or chkdsk in Windows 7 to check a selected hard disk for file system errors and bad sectors on it. With both boxes checked for all HDDs and with Automatically fix file system errors. Post back your logs for the checks after finding them using Check Disk (chkdsk) - Read Event Viewer LogLink to full tutorial: Disk Check
Check for heating issues using Speccy or HWmonitorHWMonitor CPUID - System & hardware benchmark, monitoring, reporting
Speccy - System Information - Free DownloadPlease upload a summary tab using Speccy. Screenshots and Files - Upload and Post in Seven Forums

http://www.sevenforums.com/bsod-help-support/310793-frequent-seemingly-random-bsod-ntoskrnl-exe.html
Relevancy 69.66%

Hi i just want to ask for help on frequent BSOD on and by windows many caused others 7 ntoskrnl.exe how to solve random frequent BSOD caused by ntoskrnl.exe and many others on windows 7 blue screen of deaths on my newly purchased netbook if i'm not mistaken it is caused by these drivers ntoskrnl exe and ntfs sys i don't know to fix the problem i've already brought it back where i purchased it and they sent it on repair but when i start it up again it crashed again as soon as i finished the set up so i tried to solve the problem by installing RegClean Pro and on st scan it fixed almost errors i thought i finally solved the problem because i was able to use my netbook for almost hours without the BSOD but when i start it up after more than hrs of being shut down it crashed again i hope you can help me solve this problem it's very annoying and frustrating I have attached the dump files and other things as instructed hope to hear from you soon Thanks in advance P s after some observation bsods happen a few times only after i've just started up my computer but after using it for a while it never crashed again until i shut it down but it crashes again when i used it the next day my netbook is Windows x it is the original installed OS on the system it's OEM finally get what it means hehe and my netbook is newly purchased it's only been a month since i bought it

A:frequent BSOD caused by ntoskrnl.exe and many others on windows 7

Various different errors, mostly false positive fault processes and some memory corruption. This is either driver related (we don't know yet) or memory related.

Three tests I'd like you to run:





Quote:

Chkdsk:

Open the "Computer" window
Right-click on the drive in question
Select the "Tools" tab
In the Error-checking area, click <Check Now>.
Memtest:

Read the following to test your memory for errors.

Driver Verifier:

Read the following to enable Driver Verifier. Use Driver Second if Memtest finds nothing, as it's likely a software / driver issue, we just aren't being told what it is, and hopefully Driver Verifier will than force a crash if it finds the violating driver.



Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

KMODE_EXCEPTION_NOT_HANDLED (1e)
This is a very common bugcheck. Usually the exception address pinpoints
the driver/function that caused the problem. Always note this address
as well as the link date of the driver/image that contains this address.
Arguments:
Arg1: ffffffffc000001d, The exception code that was not handled
Arg2: fffff80001aaeea6, The address that the exception occurred at
Arg3: 0000000000000000, Parameter 0 of the exception
Arg4: fffff70001080400, Parameter 1 of the exception

Debugging Details:
------------------
EXCEPTION_CODE: (NTSTATUS) 0xc000001d - {EXCEPTION} Illegal Instruction An attempt was made to execute an illegal instruction.

FAULTING_IP:
nt!MiUpdateWsle+1b6
fffff800`01aaeea6 ff ???

EXCEPTION_PARAMETER1: 0000000000000000

EXCEPTION_PARAMETER2: fffff70001080400

ERROR_CODE: (NTSTATUS) 0xc000001d - {EXCEPTION} Illegal Instruction An attempt was made to execute an illegal instruction.

BUGCHECK_STR: 0x1E_c000001d

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

PROCESS_NAME: NisSrv.exe

CURRENT_IRQL: 0

LAST_CONTROL_TRANSFER: from fffff80001ae7588 to fffff80001a9bc40

FAILED_INSTRUCTION_ADDRESS:
nt!MiUpdateWsle+1b6
fffff800`01aaeea6 ff ???

STACK_TEXT:
fffff880`06dfce08 fffff800`01ae7588 : 00000000`0000001e ffffffff`c000001d fffff800`01aaeea6 00000000`00000000 : nt!KeBugCheckEx
fffff880`06dfce10 fffff800`01a9b2c2 : fffff880`06dfd5e8 000007fe`fac16001 fffff880`06dfd690 fffffa80`00dfb450 : nt! ?? ::FNODOBFM::`string'+0x4977d
fffff880`06dfd4b0 fffff800`01a9941f : fffff880`06dfd690 fffff880`06dfd600 fffff6fb`00002700 fffff6fb`00000000 : nt!KiExceptionDispatch+0xc2
fffff880`06dfd690 fffff800`01aaeea6 : 000007fe`fad55001 000007fe`fac13001 fffff700`01080000 00000000`00000000 : nt!KiInvalidOpcodeFault+0x11f
fffff880`06dfd820 fffff800`01abae4d : 00000000`000005fe 00000000`01a81ff0 fffff700`01080000 fffff700`01080000 : nt!MiUpdateWsle+0x1b6
fffff880`06dfd890 fffff800`01aba53f : 5fe00000`4a917025 00000000`4a917121 fffffa80`000244e0 00000000`00000000 : nt!MiCompleteProtoPteFault+0x2cd
fffff880`06dfd920 fffff800`01ab9053 : 00000000`0004bf27 000007fe`fac169bc fffff683`ff7d60b0 fffffa80`040b13f8 : nt!MiResolveProtoPteFault+0x1cf
fffff880`06dfd9b0 fffff800`01aa8f19 : 0000718c`00000000 000007fe`fac169bc fffff880`06dfdb40 fffff680`00000000 : nt!MiDispatchFault+0x1c3
fffff880`06dfdac0 fffff800`01a99d6e : 00000000`00000008 000007fe`fac169bc 00000000`00aef501 00000000`01a91210 : nt!MmAccessFault+0x359
fffff880`06dfdc20 000007fe`fac169bc : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiPageFault+0x16e
00000000`00aef0f8 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x7fe`fac169bc
STACK_COMMAND: kb

FOLLOWUP_IP:
nt!MiUpdateWsle+1b6
fffff800`01aae... Read more

http://www.sevenforums.com/bsod-help-support/216277-frequent-bsod-caused-ntoskrnl-exe-many-others-windows-7-a.html
Relevancy 69.66%

Hi all, my computer has been running great. just last week, it started randomly producing the BSOD. I have several dump files. I've tried analyzing them with WinDbg but I get nothing but errors:

Unable to load image \SystemRoot\system32\ntoskrnl.exe, Win32 error 0n2

can someone analyze my dump files, and tell me if I have bad memory or bad motherboard?

I've uploaded the files here.

my system is 3 years old:
Windows 7 Pro 64bit
Asus P6T Deluxe
i7 940 2.93Ghz

A:BSOD frequent, tried debugging, but Ntoskrnl.exe error

Are you analyzing the minidumps or the kernel dump (MEMORY.DMP in Windows directory)? Either way, make sure symbols are set up properly. You can use the MS Symbol Server here.

Anyways, I personally could not find anything of value in these minidumps. Can't really deepdive any of them as they're just minidumps, so you'll wanna provide a kernel dump or turn on DV. If you decide to turn on DV, make sure not to check Force Pending I/O Requests, Low Resource Sim and IRP Logging. They will cause false positives and other behavior.

http://www.sevenforums.com/bsod-help-support/241276-bsod-frequent-tried-debugging-but-ntoskrnl-exe-error.html
Relevancy 69.66%

I'm running Windows 7 Pro (64-bit) and at various times throughout the day, no matter what I have open, I get the same BSOD error - DRIVER_IRQL_NOT_LESS_OR_EQUAL. DM Log Collector zip file is attached. Any assistance would be most appreciated.

A:Frequent BSOD, suspect wdf01000.sys and ntoskrnl.exe

Your BSOD's were caused by Intel Management Engine Interface driver.

TeeDriverx64.sys Tue Apr 23 23:36:39 2013 (5176C6A7)
Intel Management Engine Interface driver
Driver Reference Table - TeeDriverx64.sys

Please remove it for testing purpose.

Use Revo Uninstaller to uninstall stubborn software. Opt for Advance Mode while uninstalling which allows you to remove leftover registry:-Download Revo Uninstaller Freeware - Free and Full Download - Uninstall software, remove programs, solve uninstall problems

Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable!:-

hardlock.sys Mon Feb 2 21:34:08 2009 (49871270)
Hardlock Device Driver by Aladdin KnowledgeSystems
Driver Reference Table - hardlock.sys

NTIDrvr.sys Wed Mar 25 09:09:39 2009 (49C9A073)
NTI CD-ROM Filter Driver by NewTech Infosystems (likely a part of Acer Empowering Technology)
Driver Reference Table - NTIDrvr.sys

UBHelper.sys Mon Apr 27 14:48:19 2009 (49F57153)
NTI CD &DVD-Maker or NTI Backup NOW! or NTI CD-Maker by NewTech Infosystems (usually in Acer Empowering Technology)
Driver Reference Table - UBHelper.sys

mwlPSDFilter.sys Tue Jun 2 16:07:30 2009 (4A24F9E2)
EgisTec Inc. Fingerprint Biometrics
Driver Reference Table - mwlPSDFilter.sys

mwlPSDNServ.sys Tue Jun 2 16:07:39 2009 (4A24F9EB)
EgisTec Inc. Fingerprint Biometrics
Driver Reference Table - mwlPSDNServ.sys

mwlPSDVDisk.sys Tue Jun 2 16:15:29 2009 (4A24FBC1)
EgisTec Inc. Fingerprint Biometrics
Driver Reference Table - mwlPSDVDisk.sys

iaStor.sys Sat Oct 3 01:58:50 2009 (4AC65B7A)
Intel Storage drivers
Driver Reference Table - iaStor.sys

aksdf.sys Wed Jul 21 21:59:49 2010 (4C471975)
Data Filter Driver by Aladdin Knowledge Systems
Driver Reference Table - aksdf.sys

aksfridge.sys Fri Sep 24 17:27:55 2010 (4C9C8B3B)
AksFridge driver (Aladdin security products)
Driver Reference Table - aksfridge.sys

To perform a clean install of a driver, follow this tutorial:How to Clean Left Over Driver Files with Driver Sweeper
Run the System File Checker that scans the of all protected Windows 7 system files and replaces incorrect corrupted, changed/modified, or damaged versions with the correct versions if possible:SFC /SCANNOW Command - System File Checker
Scan with Kaspersky TDSSKiller:Anti-rootkit utility TDSSKiller
ESET online scanner: Free Online Virus Scanner | ESET
Run Disk Check on your hard disk for file system errors and bad sectors on it:Disk Check
Check for heating issues using Speccy or HWmonitor

Upload a screen shot: Screenshots and Files - Upload and Post in Seven Forums

Post a screenshot of your Hard Drive(s) using Crystal Disk Info software:CrystalDiskInfo - Software - Crystal Dew World
Run a Hard Drive test:SeaTools for DOS and Windows - How to Use
Post back results.

BSOD BUGCHECK SUMMARY

Code:
Built by: 7601.18247.amd64fre.win7sp1_gdr.130828-1532
Debug session time: Tue Apr 22 00:36:24.941 2014 (UTC + 6:00)
System Uptime: 0 days 0:17:10.189
BugCheck D1, {10, 2, 0, fffff88000e8c87c}
Probably caused by : Wdf01000.sys ( Wdf01000!FxIrpQueue::RemoveNextIrpFromQueue+14 )
BUGCHECK_STR: 0xD1
PROCESS_NAME: UNS.exe
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.18247.amd64fre.win7sp1_gdr.130828-1532
Debug session time: Mon Apr 21 22:19:36.131 2014 (UTC + 6:00)
System Uptime: 0 days 0:03:18.054
BugCheck D1, {10, 2, 0, fffff88000e568c5}
Probably caused by : Wdf01000.sys ( Wdf01000!FxIrpQueue::RemoveNextIrpFromQueue+5d )
BUGCHECK_STR: 0xD1
PROCESS_NAME: UNS.exe
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.18247.amd64fre.win7sp1_gdr.130828-1532
Debug session time: Mon Apr 21 22:15:20.494 2014 (UTC + 6:00)
System Uptime: 0 days 0:41:3... Read more

http://www.sevenforums.com/bsod-help-support/329244-frequent-bsod-suspect-wdf01000-sys-ntoskrnl-exe.html
Relevancy 69.66%

Hello techy folks,

I have been experiencing frequent BSODs in Windows 7. Did clean installation twice/thrice but got BSODs whatsoever. Therefore, I decided to install Windows 8 thinking that the problem would solve. It did! But now BSODs occur after around every 4 hours (as compared to Win 7 occurring twice in an hour).

I used blue screen viewer to find out what driver was causing the issue and similar to that in Win7, it's ntoskrnl.exe however, description of BSODs now differ. In Win7, BSODs used to occur with 'MEMORY_MANAGEMENT' but in Win8, 'PEN_LIST CORRUPT' and 'MEMORY_MANAGEMENT' occured twice to thrice times respectively in two days.

I've attached necessary files created using SF_Diagnostic tool .

One more thing, I'd installed SIW to find out specs and detailed drivers on my computer. I've attached what I found interesting as a screenshot.

Please help me! It's getting on my nerves since it's the first time this 'BSOD' thing has bothered me.

A:BSOD in Windows8 at frequent times (ntoskrnl.exe)

BSOD's pointed to memory corruption from various processes (Utorrent.exe, ntoskrnl.exe, MsMpEng.exe...). You might have a bad memory stick. Download Memtest86+ - Advanced Memory Diagnostic Tool and burn it to CD/USB then run the memory diagnostic, It is important to let it run over night. I've helped someone in this forum, he did not run long enough and the diagnostic may pass the first few rounds and finally we found out that was indeed he had a bad memory stick.

Good luck !!!

http://www.eightforums.com/bsod-crashes-debugging/22095-bsod-windows8-frequent-times-ntoskrnl-exe.html
Relevancy 69.66%

I have had problems with this laptop randomly shutting off and bsods. The cause of the majority of the bsods is ntoskrnl.exe. I have uninstalled Avast and replaced it with AVG on 12/16/11 (today, for me atleast.).

I have checked off automatic restart and still doesn't show a blue screen very often, it just reboots.
I ran memtest on multiple occasions for at least 2 passes each and no errors were found.

Operating System: Windows 7 Home Premium 64-bit Service Pack 1
System Model: Gateway NV57H26u
Processor: Intel Core i5-2410M CPU @ 2.30GHz

A:Frequent ntoskrnl.exe BSOD's and random reboots.

  
Quote: Originally Posted by homieb1030


I have had problems with this laptop randomly shutting off and bsods. The cause of the majority of the bsods is ntoskrnl.exe. I have uninstalled Avast and replaced it with AVG on 12/16/11 (today, for me atleast.).

I have checked off automatic restart and still doesn't show a blue screen very often, it just reboots.
I ran memtest on multiple occasions for at least 2 passes each and no errors were found.

Operating System: Windows 7 Home Premium 64-bit Service Pack 1
System Model: Gateway NV57H26u
Processor: Intel Core i5-2410M CPU @ 2.30GHz


You have 5 different appearent causes in 7 crashes. My gut feeling says it is Related to bScsiMSa.sys Memory Stick Controller from Broadcom Corporation.

I would remove it at least to test.
You also have some old drivers needing updating

Code:
Afc.sys 7/12/2006 12:48:20 AM fffff880`05fd5000 fffff880`05fde000 0x00009000 0x44b48d24
NTIDrvr.sys 3/24/2009 10:09:39 PM fffff880`05fe6000 fffff880`05fee000 0x00008000 0x49c9a073
UBHelper.sys 4/27/2009 3:48:19 AM fffff880`05fde000 fffff880`05fe6000 0x00008000 0x49f57153
How To Find Drivers:




Quote:
- search Google for the name of the driver
- compare the Google results with what's installed on your system to figure out which device/program it belongs to
- visit the web site of the manufacturer of the hardware/program to get the latest drivers (DON'T use Windows Update or the Update driver function of Device Manager).
- if there are difficulties in locating them, post back with questions and someone will try and help you locate the appropriate program.


- - The most common drivers are listed on this page: Driver Reference Driver Reference
- - Driver manufacturer links are on this page: Drivers and Downloads

http://www.sevenforums.com/bsod-help-support/203039-frequent-ntoskrnl-exe-bsods-random-reboots.html
Relevancy 69.23%

This has been happening numerous times within the past few months and it usually happens mostly when I am playing League of Legends and I have skype running It has crashed a couple of time with only Aptana and Google Chrome open Graphics NVIDIA GeForce GTX Ti BOOST EVGA Ram GB Dual-Channel DDR Motherboard ASUSTek P Z -M I have attached my dmp files to this thread According to blue screen view the culprit for my latest BSOD was AgileVpn sys with a quot SYSTEM SERVICE EXCEPTION quot bug check string The nd latest one was rdpbus sys also with a quot SYSTEM SERVICE EXCEPTION quot and the rd latest was cdrom sys with quot SYSTEM SERVICE EXCEPTION quot as well I have taken a look into my device manager and it appears the only thing that has a warning on it is the hlnfd driver playing BSOD League Frequent Legends while of [ntoskrnl.exe] with this device status quot This device is not present is not working properly or does not have all its drivers installed Code quot I don't know if this has anything to do with my bsod's but thought I would share that just in case it does A similar thing has happened before with all these bsods while playing League about a month Frequent BSOD while playing League of Legends [ntoskrnl.exe] ago and I Frequent BSOD while playing League of Legends [ntoskrnl.exe] ran memtest and found out it was bad ram-chip I ran each individual chip out of for - hours each and found the bad one removed it and that had fixed my bsods for about a month Now they are popping up again but not as frequent as before You don't think it's possible another ram chip already went bad again do you Any help would be appreciated on the subject -Cheers Jacob

A:Frequent BSOD while playing League of Legends [ntoskrnl.exe]

Please remove AVg as it can cause BSODs.
Replace it with Microsoft Security Essentials and Malwarebytes.

Microsoft Security Essentials - Microsoft Windows

Malwarebytes | Free Anti-Malware & Internet Security Software



   Warning

Make sure you don't activate the free trial of malwarebytes



Stress test your graphics card with Furmark

I recommend running it for around 30 minutes



   Warning

Furmark will increase the temperature of your GPU rapidly so keep and eye on your temperatures

Memtest86 will test your RAM



   Information

Run Memtest86 for at least 8 passes so we get enough information to confirm that your RAM isn't failing

If everything passes and the AVG removal doesn't fix the issues then try rolling back your GPU driver to 314.22

Here's some useful instructions.

NVIDIA Drivers - Avoid Problems

Let us know how everything goes.

http://www.sevenforums.com/bsod-help-support/330075-frequent-bsod-while-playing-league-legends-ntoskrnl-exe.html
Relevancy 69.23%

I built a PC for my Dad and get daily BSOD. Cannot find the source.
Windows 7
- x64
- Is theoriginal installed OS on the system. I installed in on an all new system
- Is full retail version

- What is the age of system (hardware) - ~ 1year
- What is the age of OS installation- Did full reinstall. OS reinstalled about 1 month ago.

Can anyone help?

A:Frequent BSOD Crashes related to ntoskrnl and NTFS.sys

These crashes were caused by memory corruption (probably a driver). Please run these two tests to verify your memory and find which driver is causing the problem.

If you are overclocking anything reset to default before running these tests.
In other words STOP!!!
1-Memtest.





Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.



RAM - Test with Memtest86+

2-Driver verifier






Quote:
Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.


Driver Verifier - Enable and Disable
Further Reading
Using Driver Verifier to identify issues with Windows drivers for advanced users

One thing that needs to be removed is this driver. Related to SCMNdisP.sys NDIS User mode I/O Driver from Windows (R) Codename Longhorn DDK provider

http://www.sevenforums.com/bsod-help-support/208567-frequent-bsod-crashes-related-ntoskrnl-ntfs-sys.html
Relevancy 69.23%

I've been suffering BSoDs relatively frequently for a while now, in my perception mostly when watching streamed flash video such as from YouTube or Twitch.tv.
Multiple system wipes/fresh installations have not resolved the issue.
RAM replacement seemed to allow me to catch a break at first, but BSoDs returned after few days of calm and I suffered 3 of them during the last 2 days. Western Digital Data Lifeguard Diagnostics and MemTest (ran multiple copies simultaneously for 8 hours) returned no errors.

According to the dump files, BSoDs were caused by a combination of ntoskrnl.exe and dxgmms1.sys.
Again, in my imagination most of them they seem to coincide with streaming flash video via Twitch.tv, which I watch using multiple instances of Google Chrome and Firefox. Although that might be completely unrelated.

As a layman, I'm puzzled, and thus turn to you for your insight and help.

A:Frequent BSoD for ntoskrnl.exe, dxgmms1.sys when watching yt, twitch

Please start by removing the following programs from your computer:


Code:
Start Menu\Programs\DAEMON Tools Lite
Once Daemon tools is gone please download and run this tool:

DuplexSecure - Downloads

When the tool runs if the uninstall button is grayed out your done and can close the window. If it is not please click it and allow the tool to do its job. DO NOT click the install button it will install a driver known to cause BSODs.

Also uninstall this program it is likely doing more harm than good:

Code:
Start Menu\Programs\TuneUp Utilities 2013
Next please update the following drivers thaey are potentialy problimatic:

Code:
fffff880`0c9fc9c8 fffff880`07308dbf*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
atikmdag+0x7ddbf
Driver Reference Table - atikmdag.sys

update it from here:http://support.amd.com/us/Pages/AMDSupportHub.aspx


Code:
fffff880`02f1a598 fffff880`041a0010Unable to load image \SystemRoot\system32\DRIVERS\Rt64win7.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for Rt64win7.sys
*** ERROR: Module load completed but symbols could not be loaded for Rt64win7.sys
Rt64win7+0x3010
Driver Reference Table - Rt64win7.sys

Please update this driver from here: Realtek

http://www.sevenforums.com/bsod-help-support/288436-frequent-bsod-ntoskrnl-exe-dxgmms1-sys-when-watching-yt-twitch.html
Relevancy 69.23%

Hi guys i really hope someone can help me with this i have been pulling my hair out for a while now and going becoming more shutdown error frequent ntoskrnl.exe+7fd00 BSOD in circles this all started back in august yes way BSOD shutdown becoming more frequent error ntoskrnl.exe+7fd00 back i was getting BSOD shutdown becoming more frequent error ntoskrnl.exe+7fd00 the odd crash blue screen i thought it may have been a virus causing it so did all the usual scans but the crashes were still happening one every week or two then lately they started getting more frequent I searched around for a solution and reading on differant forums I thought i found the answer although it ment drastic action i backed up what files i needed to keep and did a factory restore on my laptop to factory settings thinking this would solve it wrong im not very techy still learning a bit at a time now i have managed to get into the dump files and its saying the cause of the crashes was ntoskrnl exe fd but reading a little on the forum this may not be the cause i have uploaded the logs if someone could have a look for me and perhaps help in any way to solve this problem be very grateful my device is acer aspire notebook windows home premium bit SP intel core i - m intel graphics gb ddr memory gb HDD While i was running the log collecter i had a few more blue screen crashes so im not sure if all the logs completed so i have zip files i will upload both thanks in advance guys

A:BSOD shutdown becoming more frequent error ntoskrnl.exe+7fd00

Hiya and welcome to SevenForums!

Code:
BugCheck 3B, {c0000005, fffff80002d57b55, fffff88003d87b40, 0}

Probably caused by : memory_corruption ( nt!MiGetTopLevelPfn+65 )

Code:
BugCheck 1E, {ffffffffc0000005, fffff80002cd3f7f, 0, ffffffffffffffff}

Probably caused by : memory_corruption ( nt!MiMapPageInHyperSpaceWorker+1b )

Code:
BugCheck 24, {1904fb, fffff88005724f38, fffff88005724790, fffff80002d00f7f}

Probably caused by : memory_corruption ( nt!MiMapPageInHyperSpaceWorker+1b )

Code:
BugCheck 34, {50853, fffff88006efb358, fffff88006efabb0, fffff80002cdcb27}

Probably caused by : memory_corruption ( nt!MiPfnShareCountIsZero+77 )
Run MemTest86+ for 8 passes, It must be MemTest86+. RAM - Test with Memtest86+

http://www.sevenforums.com/bsod-help-support/387773-bsod-shutdown-becoming-more-frequent-error-ntoskrnl-exe-7fd00.html
Relevancy 69.23%

hi, im getting random bsod errors mainly by ntoskrnl.exe and also i experience random freezing when i play games for around 10-20 mins. it freezes with a distorted sound.

attached dump files. please take a look.

Relevancy 69.23%

My notebook is an ASUS X U running Windows Home Premium -bit edition The computer is on ntoskrnl.exe? poss. ASUS Frequent new Notebook, BSOD a little over two months old received it Frequent BSOD on new ASUS Notebook, poss. ntoskrnl.exe? as a Christmas gift and it had worked perfectly fine up until a few weeks ago when I began experiencing seemingly random BSODs So far I have not been able to Frequent BSOD on new ASUS Notebook, poss. ntoskrnl.exe? find out how to force it to happen all I can say is the first two times it BSOD'ed the dmp file showed that it was quot hal dll quot causing the problem now every single time since the problem seems to be caused by quot ntoskrnl exe quot Like I said the crashes are completely random sometimes happening once a day and other times happening three or four times in an hour I tried to figure out what was going Frequent BSOD on new ASUS Notebook, poss. ntoskrnl.exe? on by looking at the dmp files in WhoCrashed and it seems to be indicating a hardware error The only external hardware I have hooked up to my PC is a mouse which does randomly stop working on occasion Could there be an issue with it Also this may not be true quot hardware quot persay but I do have a virtual CD-ROM drive installed through Virtual CloneDrive System Specs ASUS X U Notebook Windows Home Premium -bit AMD E Processor GHz GB Ram

A:Frequent BSOD on new ASUS Notebook, poss. ntoskrnl.exe?

Your .dmp file shows a stop error of 0x124 which is a general hardware error .





Quote:
A "stop 0x124" is fundamentally different to many other types of bluescreens because it stems from a hardware complaint.

Stop 0x124 minidumps contain very little practical information, and it is therefore necessary to approach the problem as a case of hardware in an unknown state of distress


Some generic advice.

If you are overclocking STOP. Return to the default settings at least for now.
If you are running a RAID update its driver.
You can read more on this error and what to try here... Stop 0x124 - what it means and what to try

http://www.sevenforums.com/bsod-help-support/214658-frequent-bsod-new-asus-notebook-poss-ntoskrnl-exe.html
Relevancy 69.23%

I was moved a PC from one office to another and began receiving BSOD on the system. I do not see how this could have happened just from relocating a system

I will attach zip files as soon as the system reboots.

A:Frequent BSOD, ntoskrnl.exe+e6d50 and Ntfs.sys+a3b80

You have old drivers on modern OS:
LMIRfsDriver.sys (https://secure.logmein.com) - Mon Jul 14 19:26:56 2008
Try to update this program.

http://www.sevenforums.com/bsod-help-support/331317-frequent-bsod-ntoskrnl-exe-e6d50-ntfs-sys-a3b80.html
Relevancy 69.23%

Hello sevenforums.
My PC has always given me trouble in the past by randomly restarting and getting BSODed. I used to "live with it" but over last 2-3 months it has gotten out of hand. My PC restarts at least 2-3 times per day. I always get 0x124 bug check code and so tested the processor with prime95 (for 2-3 hours) and ram with memtest86+(3 passes) but got clean results. I've attached the latest 10 minidumps. I'm at my wits end and REALLY dont want to reinstall windows! :O
Thanks in advance.
Edit: It does not even show a bsod but directly reboots.

A:Random frequent BSOD 0x124 / 0x00000124 ntoskrnl.exe?

Minidumps attached

http://www.sevenforums.com/bsod-help-support/273895-random-frequent-bsod-0x124-0x00000124-ntoskrnl-exe.html
Relevancy 69.23%

Frequent BSOD in VirtualBox guest Windows 7 Ultimate x64, seems random, WinDbg points to ntoskrnl.exe
Attached please find SF_Diagnostic_Tool results. Thanks a lot for your help!

A:Frequent BSOD, seems random, WinDbg points to ntoskrnl.exe

It is failing on various components. Network, display, Storage controllers, etc. One example ....

Code:
fffff880`069546e8 fffff880`06eb643aUnable to load image VBoxVideoWddm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for VBoxVideoWddm.sys
*** ERROR: Module load completed but symbols could not be loaded for VBoxVideoWddm.sys
VBoxVideoWddm+0xd43a
It is the display driver, which is a component of the Guest additions. But guest additions are the latest themselves.

Code:
fffff880`06ea9000 fffff880`06fb3000 VBoxVideoWddm T (no symbols)
Loaded symbol image file: VBoxVideoWddm.sys
Image path: VBoxVideoWddm.sys
Image name: VBoxVideoWddm.sys
Timestamp: Tue Oct 15 16:13:05 2013 (525D1C39)
CheckSum: 00050EE4
ImageSize: 0010A000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
May be it is all due to an old version of VirtualBOX software.

Code:
BiosVersion = VirtualBox
BiosReleaseDate = 12/01/2006
I would suggest you to update the program.

http://www.sevenforums.com/bsod-help-support/313260-frequent-bsod-seems-random-windbg-points-ntoskrnl-exe.html
Relevancy 69.23%

Hi Guys I have been reading different forums trying to get some help but it has been fruitless so I am now a registered user I have a custom built computer Built in Frequent, random poss. ntoskrnl.exe? BSOD, seeminly that originally worked great and now has issues I have been gone for a year so it may have started sooner or wasn't something my dad noticed So enough preemble this is what's wrong I kept getting random program crashes and sometimes BSODs but never read them out I now reinstalled Windows deleted old partitions created them new and formatted them and all programs fresh too At first things went fine Format was on Friday but as you can see from the attached mini dumps the BSODs are becoming more frequent I tried reading them Frequent, seeminly random BSOD, poss. ntoskrnl.exe? out with the Frequent, seeminly random BSOD, poss. ntoskrnl.exe? win debug tool and BlueScreenView but only got as far as them blaming ntoskrnl exe and linking to svchost exe I tried memtest overnight it completed passes without errors but then the computer crashed - times this morning already again while i was copying lightroom photo databases Yesterday it crashed on wake Sometimes it crashes during a game Or browsing The minidumps do not reflect the crashes since some somehow didn't seem to get saved As you can see I am getting desperate It seems like a possible memory issue but not reliable enough to make sure it is that Could be mainboard or a combination I would welcome any hints as to the problem or a possible solution thanks a lot Juice

A:Frequent, seeminly random BSOD, poss. ntoskrnl.exe?

We need more than just the dump files to analyse your logs, follow Blue Screen of Death (BSOD) Posting Instructions and upload the new logs.

http://www.sevenforums.com/bsod-help-support/367045-frequent-seeminly-random-bsod-poss-ntoskrnl-exe.html
Relevancy 68.37%

Hello Guys I'm new to this forum and after days with problems on PC I decided to get a help from better experienced people from this forum Recently I have had lots of BSOD screens on my PC sometimes happening when I'm playing D games sometimes just the simple fact of starting the PC to screens referred cause ntoskrnl.exe - WinDbg probable Frequent BSOD causes it to crash many times Most BSOD refers to IRQL NOT LESS OR EQUAL error Even right now while I was creating Frequent BSOD screens - WinDbg referred probable cause to ntoskrnl.exe this thread the system suddenly crashed screen got corrupted and I had to reboot The interesting fact is that sometimes it crashes even at BIOS making screen FREEZE I Frequent BSOD screens - WinDbg referred probable cause to ntoskrnl.exe have checked mobo and CPU temp which are OK I have even passed a memory test using Windows Memory Diagnostic Tool - which encountered NO errors I'm suspecting these crashes started after I UPDATED ATI Drivers to version I have a Radeon HD so I UNINSTALLED Catalyst software and maintained ONLY drivers Even after doing this the crashes still occur Because I don't know how to read minidumps neither I'm expert at debugging I want help of you to clear my doubt about WHAT is causing crashes As instructed I have uploaded the zip file with SF Diagnositc Tool Please if any of you can help I'd be grateful Thanks StratosPhera

A:Frequent BSOD screens - WinDbg referred probable cause to ntoskrnl.exe

Attachment 228898 << This is the zipped file of SF_Diagnostic_Tool

Thanks,

StratosPhera

http://www.sevenforums.com/bsod-help-support/249790-frequent-bsod-screens-windbg-referred-probable-cause-ntoskrnl-exe.html
Relevancy 68.37%

Hi guys I've lately been getting very frequent blue screens They've been occurring for a while but until the last few days they've been rare Now they are happening every few hours randomly and can be triggered 0x0000003b, info BSOD ntoskrnl.exe, 0x1000007e, attached Frequent after I spend minutes in Photoshop Looking at the minidumps in BlueScreenView I can see ntoskrnl exe in every entry and most crashes are either error x b or x e PC Frequent BSOD 0x0000003b, 0x1000007e, ntoskrnl.exe, info attached is months old the Windows install is months old I had to reinstall windows due to an issue with my SSD which caused my PC not to boot It was due to a known issue with Vertex drives which could be part of the problem I will be running Memtest overnight to test for errors System Specs Windows Ultimate x full retail Intel Core i K Asus P Z -V Pro G SKILL Ripjaws GB DDR - Nvidia Geforce GTX GB Asus Xonar DG Soundcard OCZ Vertex II SSD WD Caviar Green TB HDD Corsair Professional HX W PSU Any help is much appreciated Thanks

A:Frequent BSOD 0x0000003b, 0x1000007e, ntoskrnl.exe, info attached

SSD's have been problematic recently. We've seen numerous BSOD's due to them. Here's the info that I have so far:





Quote:
There's not a whole bunch available to test SSD's. The "easiest" test is to remove the SSD, install a platter-based hard drive, install Windows and test for stability that way.

Here's some suggestions:
- Update the SSD's firmware to the latest available version (VERY IMPORTANT!!!)
- Slow the memory (RAM) down to the next slower speed (I've only seen one person who claimed that this worked for them).
- Use any manufacturer's utilities that you may have. If you don't have any, then try this free one (I haven't used it myself): Crystal Dew World
- Update chipset and storage controller drivers to the latest available from the manufacturer of the device (not the manufacturer of the motherboard). Be sure to update ALL controllers on the motherboard!
....NOTE: Recently (Nov 2011) we had BSOD issues with the Marvell 91xx controller and an SSD. You may have to switch controllers also.-
Replace the SSD with a platter based hard drive and see if that stops the BSOD's. If it does, then it's likely that there's a problem with the SSD OR an incompatibility with your system.
It's my opinion that SSD's aren't reliable enough (with current hardware) to be used on a system that needs to work reliably. Until I see reliability I will not recommend, nor will I use, SSD's for critical applications.
06 Dec 2011 - This post tends to confirm issues with certain SSD chipsets and certain controllers - [SOLVED] cant find the cause of BSOD F4 - Tech Support Forum


If you are overclocking, please stop while we're troubleshooting.

Only running the memory dumps from 2012 (9 of them).

perfmon reports a problem with your nVidia program. Please do the following:
- download a fresh copy of the latest Win7 x64 drivers from the nVidia site here: Graphics Driver - GeForce 285.62 Driver - GeForce
- uninstall the nVidia stuff from your system
- install the freshly downloaded drivers
- monitor for further BSOD's

Many device drivers aren't installed on your system. Please visit the Asus support site for your mobo ( ASUSTeK Computer Inc. - Motherboards- ASUS P8Z68-V PRO ), enter your OS info (Windows 7 64bit) and download/install ALL drivers/programs for your system.





Quote:
SM Bus Controller PCI\VEN_8086&DEV_1C22&SUBSYS_844D1043&REV_05\3&11583659&0&FB The drivers for this device are not installed.

Universal Serial Bus (USB) Controller PCI\VEN_1B21&DEV_1042&SUBSYS_84881043&REV_00\4&108ABD8A&0&00E4 The drivers for this device are not installed.

Universal Serial Bus (USB) Controller PCI\VEN_1B21&DEV_1042&SUBSYS_84881043&REV_00\4&DDEC341&0&00E1 The drivers for this device are not installed.

PCI Simple Communications Controller PCI\VEN_8086&DEV_1C3A&SUBSYS_844D1043&REV_04\3&11583659&0&B0 The drivers for this device are not installed.

Not Available USB\VID_0CF3&PID_3000\6&DF2EE03&0&7 The drivers for this device are not installed.
This is most likely an Atheros AR3011 Bluetooth device

Ethernet Controller PCI\VEN_8086&DEV_1503&SUBSYS_849C1043&REV_05\3&11583659&0&C8 The drivers for this device are not installed.


You do not have SP1 installed, please do this also:





Quote:
Installing Windows 7 Service Pack 1
1. Visit the PC manufacturer's website and update ALL drivers. DO NOT use Windows Update or the "Update drivers" function of Device Manager.
2. Check Device Manager for any unknown/disabled devices - if there are unknown/disabled devices, fix them with the latest drivers from the device manufacturer's website (not the PC Manufacturer)
3. Visit Windows Update and get all updates
4. Visit Windows Update and get Service Pack 1 (usually under Important Updates). Read t... Read more

http://www.sevenforums.com/bsod-help-support/208679-frequent-bsod-0x0000003b-0x1000007e-ntoskrnl-exe-info-attached.html
Relevancy 68.37%

Hello all. My computer with Windows 7 Home Edition x64 has been getting frequent BSOD as well as being super slow and unresponsive. I have attached a copy of the recent dump files hoping to find anything out as to why this is happening. I am appreciative for any input I receive.

A:Frequent BSOD with massive slowdown, possibly caused by ntoskrnl.exe

Hello, welcome to SevenForums!

Dumps are blaming pool corruption and storport.sys, storport.sys is highly unlikely as something is causing THAT itself to crash. Few things, you have SPTD.sys, which is a driver that is part of Daemon Tools. Please uninstall Daemon Tools if you haven't already, restart, and then run DuplexSecure's SPTD Uninstaller / Remover, and then restart once again.

Another thing in one of the dump files, I have to ask if this means that this is the process fault in a thread, but regardless....






Quote:
Unable to load image \SystemRoot\System32\Drivers\aswSP.SYS, Win32 error 0n2
*** WARNING: Unable to verify timestamp for aswSP.SYS
*** ERROR: Module load completed but symbols could not be loaded for aswSP.SYS
Probably caused by : Pool_Corruption ( nt!ExDeferredFreePool+cbb )


aswSP.sys (avast! Self Protection Driver)

I would recommend uninstalling Avast temporarily and install Microsoft Security Essentials just for testing, it is also known to sometimes cause issues with Windows 7 and cause BSODs.






Quote:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

BAD_POOL_HEADER (19)
The pool is already corrupt at the time of the current request.
This may or may not be due to the caller.
The internal pool links must be walked to figure out a possible cause of
the problem, and then special pool applied to the suspect tags or the driver
verifier to a suspect driver.
Arguments:
Arg1: 0000000000000003, the pool freelist is corrupt.
Arg2: fffffa8003e59320, the pool entry being checked.
Arg3: fffffa8003e59320, the read back flink freelist value (should be the same as 2).
Arg4: 0001010001e59320, the read back blink freelist value (should be the same as 2).

Debugging Details:
------------------
BUGCHECK_STR: 0x19_3

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

PROCESS_NAME: svchost.exe

CURRENT_IRQL: 2

LAST_CONTROL_TRANSFER: from fffff800035ae70f to fffff80003480c40

STACK_TEXT:
fffff880`07628e78 fffff800`035ae70f : 00000000`00000019 00000000`00000003 fffffa80`03e59320 fffffa80`03e59320 : nt!KeBugCheckEx
fffff880`07628e80 fffff800`035b01a1 : fffff880`07629100 fffffa80`0384cc60 00000000`00000000 65726370`00000000 : nt!ExDeferredFreePool+0xcbb
fffff880`07628f10 fffff880`04712e84 : 00000000`00000002 fffffa80`0621ba80 00000000`65726370 00000000`00000052 : nt!ExFreePoolWithTag+0x411
fffff880`07628fc0 00000000`00000002 : fffffa80`0621ba80 00000000`65726370 00000000`00000052 00000000`00000000 : aswSP+0x29e84
fffff880`07628fc8 fffffa80`0621ba80 : 00000000`65726370 00000000`00000052 00000000`00000000 00000000`00000000 : 0x2
fffff880`07628fd0 00000000`65726370 : 00000000`00000052 00000000`00000000 00000000`00000000 00000000`00000000 : 0xfffffa80`0621ba80
fffff880`07628fd8 00000000`00000052 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x65726370
fffff880`07628fe0 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 fffffa80`05872df0 : 0x52
STACK_COMMAND: kb

FOLLOWUP_IP:
nt!ExDeferredFreePool+cbb
fffff800`035ae70f cc int 3

SYMBOL_STACK_INDEX: 1

SYMBOL_NAME: nt!ExDeferredFreePool+cbb

FOLLOWUP_NAME: Pool_corruption

IMAGE_NAME: Pool_Corruption

DEBUG_FLR_IMAGE_TIMESTAMP: 0

MODULE_NAME: Pool_Corruption

FAILURE_BUCKET_ID: X64_0x19_3_nt!ExDeferredFreePool+cbb

BUCKET_ID: X64_0x19_3_nt!ExDeferredFreePool+cbb

Followup: Pool_corruption

BugCheck A, {fffffa880638c6d8, 2, 0, fffff800039f43da}

Unable to load image \SystemRoot\System32\Drivers\sptd.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for sptd.sys
*** ERROR: Modu... Read more

http://www.sevenforums.com/bsod-help-support/216351-frequent-bsod-massive-slowdown-possibly-caused-ntoskrnl-exe.html
Relevancy 63.21%

Hi

A few days ago I did a new hardware build and installed W7 64 ultimate. I included a Corsair SSD as my boot drive for the speed advantage.

I have done some investigation and tried to track down the cause of the BSOD but to no avail. Currently they are happening once\ twice or more a day but very erratic so have no confidence in the system at the moment.

I have uploaded dumps of recent crashes in the hope someone here can help.

Anything would be appreciated. Thanks.

A:random BSODs with new build - error related to "ntoskrnl.exe+7cc40"?

Run a RAM test RAM - Test with Memtest86+
Stop any Overclocking if any.

Remove any Avast software, use MSE instead.
Uninstall Asus PC Probe, Smart Doctor, Asus update or any other Asus utilities.

Are you using any old(pre-Vista) software that might not be 64-bit compatible?


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

CRITICAL_STRUCTURE_CORRUPTION (109)
This bugcheck is generated when the kernel detects that critical kernel code or
data have been corrupted. There are generally three causes for a corruption:
1) A driver has inadvertently or deliberately modified critical kernel code
or data. See http://www.microsoft.com/whdc/driver/kernel/64bitPatching.mspx
2) A developer attempted to set a normal kernel breakpoint using a kernel
debugger that was not attached when the system was booted. Normal breakpoints,
"bp", can only be set if the debugger is attached at boot time. Hardware
breakpoints, "ba", can be set at any time.
3) A hardware corruption occurred, e.g. failing RAM holding kernel code or data.
Arguments:
Arg1: a3a039d89c614680, Reserved
Arg2: b3b7465eeede15d6, Reserved
Arg3: fffff80001dfe036, Failure type dependent information
Arg4: 0000000000000001, Type of corrupted region, can be
0 : A generic data region
1 : Modification of a function or .pdata
2 : A processor IDT
3 : A processor GDT
4 : Type 1 process list corruption
5 : Type 2 process list corruption
6 : Debug routine modification
7 : Critical MSR modification

Debugging Details:
------------------
BUGCHECK_STR: 0x109

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: CODE_CORRUPTION

PROCESS_NAME: System

CURRENT_IRQL: 0

LAST_CONTROL_TRANSFER: from 0000000000000000 to fffff80001cd0c40

STACK_TEXT:
fffff880`021c45d8 00000000`00000000 : 00000000`00000109 a3a039d8`9c614680 b3b7465e`eede15d6 fffff800`01dfe036 : nt!KeBugCheckEx
STACK_COMMAND: kb

CHKIMG_EXTENSION: !chkimg -lo 50 -d !nt
fffff80001dfe44d - nt!ExDeferredFreePool+9ed
[ 40:00 ]
1 error : !nt (fffff80001dfe44d)

MODULE_NAME: memory_corruption

IMAGE_NAME: memory_corruption

FOLLOWUP_NAME: memory_corruption

DEBUG_FLR_IMAGE_TIMESTAMP: 0

MEMORY_CORRUPTOR: ONE_BIT

FAILURE_BUCKET_ID: X64_MEMORY_CORRUPTION_ONE_BIT

BUCKET_ID: X64_MEMORY_CORRUPTION_ONE_BIT

Followup: memory_corruption
---------

http://www.sevenforums.com/bsod-help-support/202579-random-bsods-new-build-error-related-ntoskrnl-exe-7cc40.html
Relevancy 58.48%

- x -bit or x bit - the original installed OS on the system I built the system myself - an OEM or full retail version From a MSDN account so full retail I am guessing - OEM came pre-installed on system - Full Retail you purchased it from retailer - What is the age of system hardware less than year not heavily used - What is the age of OS installation have you re-installed the OS less than month Yes ~20 ntoskernel.exe+7cc40 system up min waking from sleep BSOD after Have got BSOD's only after starting the system from sleep after min or so Use it with BSOD ~20 min after waking up system from sleep ntoskernel.exe+7cc40 a TV OR LED monitor Have MSI GTX Cyclone GB installed read somewhere that it could be the cause Haven't gamed much Use it primarily as an HTPC with XBMC hence use the SLEEP function when not watching anything I installed Driver Genius Pro and updated all the drivers I uninstalled Sandboxie and ASUS EPU Engine which I though were potential culprits from reading other forums Please let me know if any other info is needed

A:BSOD ~20 min after waking up system from sleep ntoskernel.exe+7cc40

Security Software (this is to check whether you have security software installed and it is working properly; nothing needs to be done about this at this time):
Code:
msmpeng.exe c:\program files\microsoft security client\antimalware\msmpeng.exe 932 8 200 1380 3/27/2012 4:58 PM 3.0.8402.0 12.48 KB (12,784 bytes) 4/27/2011 6:21 PM
nissrv.exe c:\program files\microsoft security client\antimalware\nissrv.exe 4212 8 200 1380 3/27/2012 4:58 PM 3.0.8402.0 281.52 KB (288,272 bytes) 4/27/2011 6:21 PM
msseces.exe c:\program files\microsoft security client\msseces.exe 2196 8 200 1380 3/27/2012 4:58 PM 2.1.1116.0 1.37 MB (1,436,736 bytes) 6/15/2011 3:35 PM


Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [D:\Kingston\BSODDmpFiles\knutzin\Windows_NT6_BSOD_jcgriff2\032712-9703-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff800`01dda500?
Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Machine Name:
Kernel base = 0xfffff800`0204c000 PsLoadedModuleList = 0xfffff800`02291670
Debug session time: Tue Mar 27 17:57:04.906 2012 (UTC - 6:00)
System Uptime: 0 days 0:22:18.406
Loading Kernel Symbols
...............................................................
................................................................
.........................................
Loading User Symbols
Loading unloaded module list
......
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa800c7eb060, fffff80001dda518, fffffa800d6a1b80}

Unable to load image \SystemRoot\system32\DRIVERS\AiCharger.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for AiCharger.sys
*** ERROR: Module load completed but symbols could not be loaded for AiCharger.sys
Probably caused by : usbhub.sys

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

DRIVER_POWER_STATE_FAILURE (9f)
A driver is causing an inconsistent power state.
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: fffffa800c7eb060, Physical Device Object of the stack
Arg3: fffff80001dda518, Functional Device Object of the stack
Arg4: fffffa800d6a1b80, The blocked IRP

Debugging Details:
------------------


DRVPOWERSTATE_SUBCODE: 3

IMAGE_NAME: usbhub.sys

DEBUG_FLR_IMAGE_TIMESTAMP: 4ce7a68e

MODULE_NAME: usbhub

FAULTING_MODULE: fffff88004ea8000 usbhub

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

BUGCHECK_STR: 0x9F

PROCESS_NAME: System

CURRENT_IRQL: 2

STACK_TEXT:
fffff800`01dda4c8 fffff800`02136cd2 : 00000000`0000009f 00000000`00000003 fffffa80`0c7eb060 fffff800`01dda518 : nt!KeBugCheckEx
fffff800`01dda4d0 fffff800`020d45fc : fffff800`01dda630 fffff800`01dda630 00000000`00000000 00000000`00000001 : nt! ??... Read more

http://www.sevenforums.com/bsod-help-support/221469-bsod-20-min-after-waking-up-system-sleep-ntoskernel-exe-7cc40.html
Relevancy 57.19%

Hey guys, I've just built a new computer and I've been getting quite a few BSODs lately. It would be awesome if you guys could help me out

Computer Specs:
Windows 7 Ultimate x 64
Intel i5-4670
Gigabyte Z87X-D3H-CF
16GB DDR3
GeForce GTX 770

A:Frequent BSOD, new computer

Hello Eternaltheft.

Your crash dumps are not showing any finite probable cause.

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

If memtest comes free from errors, enable Driver Verifier to monitor the drivers.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.



   Information
Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.



   Warning
Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.



   Tip

If you fail to get on the Desktop because of DV, Boot into Advanced Boot Options > Safe mode. Disable DV there. Now boot normally again, and try following the instruction of enabling DV again.
If you cannot boot in Safe mode too, do a System Restore to a point you made earlier.

Let us know the results, with the subsequent crash dumps, if any. Post it following the Blue Screen of Death (BSOD) Posting Instructions.

Also Upload a snapshot Using Speccy.
Download and install Speccy.
File> Save snapshot.
Save it on desktop.
Zip it and upload it following following Screenshots and Files - Upload and Post in Seven Forums .
_____________________________________________________________________________
BSOD ANALYSIS:


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 50, {fffff8801c670000, 0, fffff80003095bbb, 0}
Could not read faulting driver name
Probably caused by : win32k.sys ( win32k!GreGetDIBitsInternal+d6 )

Followup: MachineOwner
---------

1: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced. This cannot be protected by try-except,
it must be protected by a Probe. Typically the address is just plain bad or it
is pointing at freed memory.
Arguments:
Arg1: fffff8801c670000, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffff80003095bbb, If non-zero, the instruction address which referenced the bad memory
address.
Arg4: 0000000000000000, (reserved)

Debugging Details:
------------------
Could not read faulting driver name

READ_ADDRESS: GetPointerFromAddress: unable to read from fffff800032c7100
GetUlongFromAddress: unable to read from fffff800032c71c0
fffff8801c670000 Nonpaged pool

FAULTING_IP:
nt!ExAcquireResourceSharedLite+110
fffff800`03095bbb 498b03 mov rax,qword ptr [r11]

MM_INTERNAL_CODE: 0

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

BUGCHECK_STR: 0x50

PROCESS_NAME: Skype.exe

CURRENT_IRQL: 0

TRAP_FRAME: fffff8801e16c670 -- (.trap 0xfffff8801e16c670)
NOTE: The trap frame does not contain all registers.
Some regis... Read more

http://www.sevenforums.com/bsod-help-support/303621-frequent-bsod-new-computer.html
Relevancy 57.19%

Hello I BSOD New - computer frequent have recently build a new computer i did a fresh install of windows bit After that i let it update and installed all other software i need Now every time the computer first starts up i get the Blue screen of death - BSOD After that i have to let it self-restart a few times I get an average of BSOD before i get to a stable point where it doesn't crash After that the computer runs fine The crash happens just on the welcome screen or shortly after when the desktop shows up With that random programs start to crash like explorer exe ati control center etc and then the blue screen I have tried the safe mode but it also crashes a few minutes later I have formated the pc times already suspecting bad software the first startups and restarts worked but then the same problem i have also updated the bios to the latest version and tested the sicks of ram with memtest for passes with no error and set the default ram timmings in bios i took a look on the dump files but i haven't come to any significant conclusion New computer - frequent BSOD i hope you will the Blue screens vary so i don't know where to start solving it next My pc setup -Windows Ultimate bit oem -Processor AMD Phenom II X T Processor -Graphics Card AMD Radeon HD Series Mb -Motherboard MSI FXA-GD -OCZ Fatal ty Power supply w Thanks roma

A:New computer - frequent BSOD

Hello,

I see a a couple of main probable causes. tdrpm273.sys was blamed 6 times in the dumps I ran, so it is definitely worth considering. That is an Acronis driver, so try uninstalling the program and see if that helps anything.
Code:
snapman.sys Thu Nov 11 06:05:10 2010 (4CDBCDE6)
tdrpm273.sys Tue Aug 10 05:54:18 2010 (4C6121CA)
timntr.sys Wed Jun 02 08:56:47 2010 (4C06550F)
ESET 2009 was blamed once; update to the latest version: Best Free Antivirus Software Trial: Free Home, Business and Gaming Download from ESET
Code:
eamon.sys Fri Sep 11 01:12:19 2009 (4AA9DC33)
ehdrv.sys Fri Sep 11 01:12:55 2009 (4AA9DC57)
epfw.sys Fri Sep 11 01:07:43 2009 (4AA9DB1F)
Epfwndis.sys Thu Apr 09 08:43:20 2009 (49DDED68)
epfwwfp.sys Fri Sep 11 01:07:43 2009 (4AA9DB1F)
Install this updated Realtek network driver: Realtek
Code:
Rt64win7.sys Thu Feb 26 04:04:13 2009 (49A65B0D)
Your ATI display drivers were also mentioned, so uninstall your current drivers in Device Manager, and install updated ones from here: AMD Graphics Drivers & Software
Code:
atikmdag.sys Thu Nov 25 21:46:44 2010 (4CEF1F94)
atikmpag.sys Thu Nov 25 21:16:47 2010 (4CEF188F)
If the BSODs persist, run driver verifier: Driver Verifier - Enable and Disable - Windows 7 Forums

...Summary of the dumps:

Code:

Built by: 7600.16695.amd64fre.win7_gdr.101026-1503
Debug session time: Sun Feb 20 03:46:12.331 2011 (UTC - 5:00)
System Uptime: 0 days 0:03:36.642
*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
Probably caused by : atikmdag.sys ( atikmdag+552d4 )
BUGCHECK_STR: 0xc2_7_Ntff
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: dwm.exe
FAILURE_BUCKET_ID: X64_0xc2_7_Ntff_atikmdag+552d4
SystemProductName = MS-7640
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16695.amd64fre.win7_gdr.101026-1503
Debug session time: Sun Feb 20 03:42:04.210 2011 (UTC - 5:00)
System Uptime: 0 days 0:00:26.521
Probably caused by : Ntfs.sys ( Ntfs!NtfsFcbTableCompare+3 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
BUGCHECK_STR: 0x24
FAILURE_BUCKET_ID: X64_0x24_Ntfs!NtfsFcbTableCompare+3
SystemProductName = MS-7640
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16695.amd64fre.win7_gdr.101026-1503
Debug session time: Sun Feb 20 03:40:46.569 2011 (UTC - 5:00)
System Uptime: 0 days 0:12:02.880
Probably caused by : ntkrnlmp.exe ( nt!CmpDelayCloseWorker+135 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
BUGCHECK_STR: 0x7E
FAILURE_BUCKET_ID: X64_0x7E_nt!CmpDelayCloseWorker+135
SystemProductName = MS-7640
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16695.amd64fre.win7_gdr.101026-1503
Debug session time: Sun Feb 20 03:27:42.999 2011 (UTC - 5:00)
System Uptime: 0 days 0:01:00.310
Probably caused by : ntkrnlmp.exe ( nt!SepTokenDeleteMethod+7e )
BUGCHECK_STR: 0xc2_7_MmSm
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: svchost.exe
FAILURE_BUCKET_ID: X64_0xc2_7_MmSm_nt!SepTokenDeleteMethod+7e
SystemProductName = MS-7640
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16695.amd64fre.win7_gdr.101026-1503
Debug session time: Sat Feb 19 06:44:40.595 2011 (UTC - 5:00)
System Uptime: 0 days 0:06:55.545
Probably caused by : ntkrnlmp.exe ( nt!SepNormalAccessCheck+24 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0xA
PROCESS_NAME: svchost.exe
FAILURE_BUCKET_ID: X64_0xA_nt!SepNormalAccessCheck+24
SystemProductName = MS-7640
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16695.amd64fre.win7_gdr.101026-1503
Debug session time: Sat Feb 19 06:36:46.330 2011 (UTC - 5:00)
System Uptime: 0 days 0:00:50.642
*** WARNING: Unable t... Read more

http://www.techsupportforum.com/forums/f299/new-computer-frequent-bsod-552764.html
Relevancy 56.76%

Hi everyone

Thx for your help
The OS is in frenchso, the html file is written in french, hope you can help me anyways

? OS - Windows 7
? x64 ?
? What was original installed OS on system? : windows 7
? Is the OS an OEM version : Yes its OEM
? Age of system (hardware) : 1 month old
? Age of OS installation - have you re-installed the OS? : 1 month old, not didint reinstall the OS
? CPU : i5
? Video Card : Radeon 5830
? MotherBoard : Asus P7P55D-e Pro
? Power Supply - brand & wattage : Corsair 750W

Thx and have a nice day!

A:[SOLVED] Frequent BSOD from a new computer

ESET was mentioned in two dumps. I see you are using an older version, so be sure to update to the 2010 version here: http://www.eset.com/download

You have an older ASACPI.sys driver, which is known to cause BSODs. Go here: http://support.asus.com/download/dow...Language=en-us

In the Utilities section, locate the ATK0110 driver, and install it.

I see you have Daemon Tools installed. It uses SPTD.sys, which is notorious for causing BSODs. Remove Daemon Tools, then use this tool to uninstall SPTD: http://www.duplexsecure.com/download...t-v174-x64.exe

Install this Realtek driver, while you're in the mood for it: http://218.210.127.131/downloads/dow...&GetDown=false


...Summary of the Dumps:
Code:

Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Wed Oct 13 19:32:35.752 2010 (UTC - 4:00)
System Uptime: 0 days 2:58:58.798
BugCheck 19, {3, fffff900c3d293a0, fffff900c3d293a0, fffffb00c3d293a0}
Probably caused by : Pool_Corruption ( nt!ExDeferredFreePool+ca0 )
BUGCHECK_STR: 0x19_3
PROCESS_NAME: firefox.exe
??????????????????????????????????????????????????????????????????????????????????????
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Wed Oct 13 16:33:04.388 2010 (UTC - 4:00)
System Uptime: 0 days 1:26:46.809
BugCheck 1A, {41790, fffffa80006c0c60, ffff, 0}
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+33906 )
BUGCHECK_STR: 0x1a_41790
PROCESS_NAME: SetPoint.exe
??????????????????????????????????????????????????????????????????????????????????????
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Wed Oct 13 15:05:38.303 2010 (UTC - 4:00)
System Uptime: 0 days 6:33:32.349
BugCheck 1A, {41790, fffffa80006c0c90, ffff, 0}
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+33906 )
BUGCHECK_STR: 0x1a_41790
PROCESS_NAME: POWERPNT.EXE
??????????????????????????????????????????????????????????????????????????????????????
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Mon Oct 11 19:04:29.040 2010 (UTC - 4:00)
System Uptime: 0 days 1:03:50.460
BugCheck 1A, {41790, fffffa80006c0c90, ffff, 0}
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+33906 )
BUGCHECK_STR: 0x1a_41790
PROCESS_NAME: ImLpp.exe
??????????????????????????????????????????????????????????????????????????????????????
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Sun Oct 10 12:09:17.016 2010 (UTC - 4:00)
System Uptime: 1 days 20:06:59.437
BugCheck A, {48, 2, 1, fffff80002abd2c9}
Probably caused by : memory_corruption ( nt!MiDereferenceControlAreaPfn+5d )
BUGCHECK_STR: 0xA
PROCESS_NAME: ekrn.exe
??????????????????????????????????????????????????????????????????????????????????????
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Thu Oct 7 20:57:58.924 2010 (UTC - 4:00)
System Uptime: 0 days 8:13:41.970
BugCheck 50, {fffffe8007434c88, 1, fffff80002a67e2e, 7}
*** WARNING: Unable to verify timestamp for eamon.sys
*** ERROR: Module load completed but symbols could not be loaded for eamon.sys
Probably caused by : eamon.sys ( eamon+6853 )
BUGCHECK_STR: 0x50
PROCESS_NAME: ekrn.exe
??????????????????????????????????????????????????????????????????????????????????????
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Wed Oct 6 20:31:46.606 2010 (UTC - 4:00)
System Uptime: 0 days 3:21:26.026
BugCheck 1A, {41790, fffffa80006c0c90, ffff, 0}
Probably caused by : win32k.sys ( win32k!SURFACE::bDeleteSurface+3c8 )
BUGCHECK_STR: 0x1a_41790
PROCESS_NAME: explorer.exe
??????????????????????????????????????????????????????????????????????????????????????
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Wed Oct 6 17:09:49.585 2010 (UTC - 4:00)
System Uptime: 0 days 7:07:56.006
BugCheck 1A, {783, fffff8800317e7c0, fffff98026a40000, fffff8a00afce970}
Probably caused by : ntkrnlmp.e... Read more

http://www.techsupportforum.com/forums/f299/solved-frequent-bsod-from-a-new-computer-521902.html
Relevancy 56.76%

Basically i put together a new rig on the 9th, and ive been gettign BSOD on almost a daily bases which is really strange as it only seems to occur when the computer is left on the desktop idle. it doesn't seem to occur when im actively using the computer.

I have a Corsair Sandforce GT 60gb? which i installed windows 7 to, at first i thought that was the problem, but ive tried updating to the latest drivers for the SSD and the problem still persist.

I also have a AMD 7970, not sure if that could also be the problem as its a new card?

systeminfo.png picture by Sinerster - Photobucket


Could someone provide some assistance? thanks in advance.

A:Frequent BSOD only when computer is idle?

Follow these posting instructions. so we can help find the problem.

http://www.techsupportforum.com/forums/f299/frequent-bsod-only-when-computer-is-idle-627047.html
Relevancy 56.76%

I have been getting plagued by these BSOD's, random crashes of applications (mostly games) and sometimes random restarts of my pc without any further errors.

These BSOD's seems to happen most often when I am playing a game, the weird thing is, sometimes I can play a game for hours on end (I even ran Unigine Valley for 12 hours one time and it ran fine), while other times unigine valley seem to crash within 30-60 minutes, give me a BSOD or a restart.

These issues seem to happen most frequently when running graphically instensive applications, but they sometimes happen outside of games as well, albeit less frequently.

I have attached the .rar file to the post, I hope that someone will be able to finally help me with this issue I have been having for months! Thanks in advance!

A:Frequent BSOD's and computer shutdowns

This driver seems to be causing your BSOD. Driver Reference Table - e1d64x64.sys Update it please.

Code:
intelppm.sys Thu Aug 22 10:46:35 2013 (5215CFEB)
Intel Processor driver
http://www.carrona.org/drivers/driver.php?id=intelppm.sys

dump_storahci.sys Thu Aug 22 13:40:39 2013 (5215F8B7)
driver created to provide disk access during crash dump file generation
http://www.carrona.org/drivers/driver.php?id=dump_storahci.sys

e1d64x64.sys Fri Aug 30 01:55:45 2013 (521FDF81)
Intel(R) Gigabit Adapter NDIS 6.x driver
http://www.carrona.org/drivers/driver.php?id=e1d64x64.sys

nvhda64v.sys Thu Nov 28 14:38:09 2013 (52974741)
nVidia HDMI Audio Device (nForce chipset driver)
http://www.carrona.org/drivers/driver.php?id=nvhda64v.sys

TeeDriverx64.sys Thu Mar 13 19:21:52 2014 (5321F740)
Intel Management Engine Interface driver
http://www.carrona.org/drivers/driver.php?id=TeeDriverx64.sys

nvlddmkm.sys Mon Nov 3 21:40:19 2014 (5457E833)
nVidia Video drivers
http://www.carrona.org/drivers/driver.php?id=nvlddmkm.sys

Debug session time: Wed Nov 19 17:47:22.502 2014 (UTC + 1:00)
Loading Dump File [C:\Users\Mihael\SysnativeBSODApps\111914-3609-01.dmp]
Built by: 9600.17328.amd64fre.winblue_r3.140827-1500
System Uptime: 0 days 6:12:29.166
*** WARNING: Unable to verify timestamp for e1d64x64.sys
*** ERROR: Module load completed but symbols could not be loaded for e1d64x64.sys
Probably caused by : e1d64x64.sys ( e1d64x64+23554 )
BugCheck A, {ffffe000d447bb18, 2, 0, fffff800f4a1c897}
BugCheck Info: IRQL_NOT_LESS_OR_EQUAL (a)
Bugcheck code 0000000A
Arguments:
Arg1: ffffe000d447bb18, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff800f4a1c897, address which referenced memory
BUGCHECK_STR: AV
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: bf4.exe
FAILURE_BUCKET_ID: AV_e1d64x64+23554
MaxSpeed: 3400
CurrentSpeed: 3392
BiosVersion = F9c
BiosReleaseDate = 06/12/2014
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = Z87X-D3H
??????????????????????????????????????????????????????????????????????????????????????``
Debug session time: Wed Nov 19 11:34:31.835 2014 (UTC + 1:00)
Loading Dump File [C:\Users\Mihael\SysnativeBSODApps\111914-3500-01.dmp]
Built by: 9600.17328.amd64fre.winblue_r3.140827-1500
System Uptime: 0 days 3:46:33.499
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+b928 )
BugCheck 133, {0, 501, 500, 0}
BugCheck Info: DPC_WATCHDOG_VIOLATION (133)
Bugcheck code 00000133
Arguments:
Arg1: 0000000000000000, A single DPC or ISR exceeded its time allotment. The offending
component can usually be identified with a stack trace.
Arg2: 0000000000000501, The DPC time count (in ticks).
Arg3: 0000000000000500, The DPC time allotment (in ticks).
Arg4: 0000000000000000
BUGCHECK_STR: 0x133
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCKET_ID: 0x133_DPC_nt!_??_::FNODOBFM::_string_
MaxSpeed: 3400
CurrentSpeed: 3392
BiosVersion = F9c
BiosReleaseDate = 06/12/2014
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = Z87X-D3H
??????????????????????????????????????????????????????????????????????????????????????``


--- E O J --- 2014 Nov 19 22:54:27 PM _88-dbug Copyright 2012 Sysnative Forums
--- E O J --- 2014 Nov 19 22:54:27 PM _88-dbug Copyright 2012 Sysnative Forums
--- E O J --- 2014 Nov 19 22:54:27 PM _88-dbug Copyright 2012 Sysnative Forums

http://www.eightforums.com/bsod-crashes-debugging/57281-frequent-bsods-computer-shutdowns.html
Relevancy 56.76%

Hi,

I dropped my Toshiba Satellite which caused a BSOD. Since then, it seems as though any bump or sudden movement would trigger a BSOD, which made me wonder if I had a hardware issue due to dropping the machine. However, today as I was trying to investigate, I noticed I was getting a BSOD about 5 seconds after opening Google Chrome. It happened 2 or 3 times in a row. Now I'm visiting you on FireFox and haven't triggered a BSOD yet.

Attached are my DMP files - Hope you can help with what little information I have.

PS. I just discovered this site today - and it is awesome! Really impressive

A:Frequent BSOD since dropping computer

Hello and welcome Gmarkey mate just have a lok at the RAM sticks and reseat them plus I would do the same for the had drive could be something real simple.

If you are wondering how to do this - this might help out Taking apart Toshiba laptops and notebooks. DIY guides. Disassembly instructions. < the hard drive is practically the same as the RAM sticks cover just remove the lid and gently pull out the hard drive - it usually has a small piece of ribbon to aid extraction.

http://www.sevenforums.com/bsod-help-support/280339-frequent-bsod-since-dropping-computer.html
Relevancy 56.76%

Hello,

When I start my computer I get frequent BSOD. The BSOD error changes between an error code and ntfs.sys error. I have added the zip file as instructed.

I'll add error code or anything else that is needed when I get home.

Any help is greatly appreciated.

Thanks.

A:Frequent BSOD when starting computer

Your dumps are showing a variety of errors based around memory/device drivers, first step would be to thoroughly test the ram using memtest86+ for a minimum of 8 passes
Memtest86+ - Advanced Memory Diagnostic Tool

http://www.sevenforums.com/bsod-help-support/375533-frequent-bsod-when-starting-computer.html
Relevancy 56.33%

- Windows x Pro - Clean install less than a month ago - Retail version download - All new hardware exept an old DVD drive I built a new computer around two months ago I originally had Windows Server R as the OS but after finding a number of compatibility problems with it I formatted the drive and did a fresh install of Windows x Pro Frequent ntoskrnl.exe on PC new BSODs -- Ever since when I've been experiencing random BSODs -- it doesn't matter if I'm playing a game browsing the internet or even if the computer is sitting idle and it occurs irregularly too Does anyone have a minute to help me track down the source of these crashes I'm at a loss This is the information from the latest crash from WhoCrashed Code On Tue AM your computer crashed This was likely caused by the following module ntoskrnl exe Bugcheck code x A x xFFFFF x A xE D F Error MEMORY MANAGEMENT Dump file C Windows Minidump - - dmp file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System And from the Event Viewer Code System - Provider Name Microsoft-Windows-Kernel-Power Guid C B A- Frequent BSODs on new PC -- ntoskrnl.exe - C Frequent BSODs on new PC -- ntoskrnl.exe -AC E- C D B EventID Version Level Task Opcode Keywords x - TimeCreated SystemTime - Frequent BSODs on new PC -- ntoskrnl.exe - T Z EventRecordID Correlation - Execution ProcessID ThreadID Channel System Computer Hildebrandt-PC - Security UserID S- - - - EventData BugcheckCode BugcheckParameter x BugcheckParameter xfffff BugcheckParameter x a BugcheckParameter xe d f SleepInProgress false PowerButtonTimestamp

A:Frequent BSODs on new PC -- ntoskrnl.exe

There is no minidump files in the one you uploaded. Are you sure it is BSODs? Are you using any program such as CCleaner or some clean tools like that?

http://www.sevenforums.com/bsod-help-support/97358-frequent-bsods-new-pc-ntoskrnl-exe.html
Relevancy 55.9%

I'm new to this forum, and i really have no idea where to begin describing the issue at hand. I can't find any way to replicate the system crashes, it crashes when it wants, as often as it wants, no matter what you're doing.

I'm uploading what is hopefully all of the information needed to help me with this issue

If you need any more information, please let me know and i will gladly upload it for you. Thankyou for any assistance you can provide

A:Random and frequent BSOD on brother's computer

There is very little info in your upload, have a read through Blue Screen of Death (BSOD) Posting Instructions and then run the SF tool, click the grab all button then wait a couple minutes for all the data to be gathered then upload the output folder as per the instructions

http://www.sevenforums.com/bsod-help-support/300556-random-frequent-bsod-brothers-computer.html
Relevancy 55.9%

Most of the solutions for ntoskrnl.exe BSODs seem to be for Windows xp. Anyone able to give me a hand?

A:Frequent Blue Screens, ntoskrnl.exe

Your Linksys USB stick caused one of your crashes. What is the exact model of it?


Code:
jraid.sys Mon Nov 03 21:20:09 2008 (490FB159)
Update your JMicron RAID driver - ftp://driver.jmicron.com.tw/SATA_Con...WHQL_eSATA.zip

Your BIOS is also very out dated. Do you happen to know which revision you have of your board? It shows you having the F1 BIOS but I can't find that on the Gigabyte site under your motherboard BIOS'

Please run these tests and report back the results
1. Memtest86 - Run for 7-8 passes - RAM - Test with Memtest86+
2. Prime95 - Run all three tests for 3-4 hours each or until fail - http://www.sevenforums.com/tutorials...t-prime95.html
3. Hard drive scan usings SeaTools - SeaTools for Windows | Seagate - Both long and short tests



BSOD BUGCHECK SUMMARY

Code:

Built by: 7601.17592.amd64fre.win7sp1_gdr.110408-1631
Debug session time: Mon May 30 12:23:19.725 2011 (UTC - 4:00)
System Uptime: 0 days 1:38:39.708
Probably caused by : ntkrnlmp.exe ( nt!KiInsertQueue+128 )
BUGCHECK_STR: 0xA
PROCESS_NAME: svchost.exe
FAILURE_BUCKET_ID: X64_0xA_nt!KiInsertQueue+128
BiosReleaseDate = 12/10/2008
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = EX58-UD3R
CPUID: "Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz"
MaxSpeed: 2670
CurrentSpeed: 2664
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.17592.amd64fre.win7sp1_gdr.110408-1631
Debug session time: Thu May 26 12:50:38.733 2011 (UTC - 4:00)
System Uptime: 0 days 0:06:33.732
Probably caused by : ntkrnlmp.exe ( nt!ExAllocatePoolWithTag+693 )
BUGCHECK_STR: 0x50
PROCESS_NAME: svchost.exe
FAILURE_BUCKET_ID: X64_0x50_nt!ExAllocatePoolWithTag+693
BiosReleaseDate = 12/10/2008
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = EX58-UD3R
CPUID: "Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz"
MaxSpeed: 2670
CurrentSpeed: 2664
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.17592.amd64fre.win7sp1_gdr.110408-1631
Debug session time: Thu May 26 12:42:49.155 2011 (UTC - 4:00)
System Uptime: 0 days 0:04:46.138
*** WARNING: Unable to verify timestamp for netr7064.sys
*** ERROR: Module load completed but symbols could not be loaded for netr7064.sys
Probably caused by : nwifi.sys ( nwifi!Pt6Receive+296 )
BUGCHECK_STR: 0xA
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0xA_nwifi!Pt6Receive+296
BiosReleaseDate = 12/10/2008
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = EX58-UD3R
CPUID: "Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz"
MaxSpeed: 2670
CurrentSpeed: 2664
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.17592.amd64fre.win7sp1_gdr.110408-1631
Debug session time: Thu May 26 12:34:17.564 2011 (UTC - 4:00)
System Uptime: 0 days 0:33:39.548
Probably caused by : ntkrnlmp.exe ( nt!KiDoubleFaultAbort+b2 )
BUGCHECK_STR: 0x7f_8
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0x7f_8_nt!KiDoubleFaultAbort+b2
BiosReleaseDate = 12/10/2008
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = EX58-UD3R
CPUID: "Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz"
MaxSpeed: 2670
CurrentSpeed: 2664
??????????????????????????????????????????????????????????????????????????????????????``

http://www.sevenforums.com/bsod-help-support/166390-frequent-blue-screens-ntoskrnl-exe.html
Relevancy 55.9%

I'm getting frequent BSODs, and I'm unclear of the cause. They can happen when my PC is doing nothing (last one happened when I was trying to write this post!)
What I have tried:
- Run CHKDSK /F /R on all hard drives: no errors
- Run Memtest overnight: Passed all tests several times, no errors
- Norton: Run Full Scan, Power Eraser, Boot Recovery Scan: no issues
- Tested the PSU with a Power Supply Tester: All OK

BlueScreenView is telling me that the causes are:
ntoskrnl.exe: PAGE_FAULT_IN_NONPAGED_AREA, DRIVER_IRQL_NOT_LESS_OR_EQUAL, MEMORY_MANAGEMENT
fltmgr.sys: SYSTEM_SERVICE_EXCEPTION

Any suggestions on what to do next would be very gratefully received!

Thanks,
D

A:Frequent BSODs from ntoskrnl.exe and fltmgr.sys

Welcome to SevenForums.

Let's take a quick look at your .dmps and their usual causes first.

Code:
STOP 0x0000003B: SYSTEM_SERVICE_EXCEPTION
Usual causes: System service, Device driver, graphics driver, ?memory
BugCheck 3B, {c000001d, fffff88007eaeba5, fffff880070f9a20, 0}
Probably caused by : SRTSP64.SYS ( SRTSP64+6aba5 )
==================================================================================
STOP 0x000000D1: DRIVER_IRQL_NOT_LESS_OR_EQUAL
Usual causes: Device driver
BugCheck D1, {fffff80000e8db80, 2, 8, fffff80000e8db80}
*** WARNING: Unable to verify timestamp for npf_devolo.sys
*** ERROR: Module load completed but symbols could not be loaded for npf_devolo.sys
Probably caused by : npf_devolo.sys ( npf_devolo+338d )
==================================================================================
STOP 0x00000050: PAGE_FAULT_IN_NONPAGED_AREA
Usual causes: Defective hardware (particularly memory - but not just RAM), Faulty
system service, Antivirus, Device driver, NTFS corruption, BIOS
BugCheck 50, {fffff6fd500b7ed8, 0, fffff80002ed099b, 2}
Could not read faulting driver name
Probably caused by : memory_corruption ( nt!MiAgeWorkingSet+1d1 )
==================================================================================
STOP 0x0000001A: MEMORY_MANAGEMENT
Usual causes: Device driver, memory, kernel
BugCheck 1A, {41284, 5c2001, 0, fffff70001080000}
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+4ac3 )
Symantec Real Time Storage Protection is contributing in BSOD-s for you. Norton is often a cause of BSOD-s it self. I would suggest you to uninstall everything related to Norton and replace with Microsoft Security Essentials while troubleshooting.Norton Removal Tool
Recommended antivirus program for Windows 7 based on stability compared to others:-
Microsoft Security Essentials - Free Antivirus for Windows
Microsoft Security Essentials Download | Free Spyware Protection
Malwarebytes - The Free version
Good and Free system security combination.
Do not start the free trial of Malware Bytes; remember to deselect that option when prompted.

Run a full scan with both (separately) once downloaded, installed and updated.

Very old drivers of WinPcap by CACE Technologies (from year 2007) are causing BSOD-s as well. You should check for possible driver update for it. Click on the Start ► Control Panel ► Programs ► Uninstall a program ► Uninstall everything related to; WinPcap by CACE Technologies. Delete remnants of its drivers/older drivers using Driver Fusion/Sweeper REBOOT

Get the latest from > Source: Driver Reference Table

Code:
0: kd> lmvm npf_devolo
start end module name
fffff880`03f72000 fffff880`03f7e000 npf_devolo T (no symbols)
Loaded symbol image file: npf_devolo.sys
Image path: \SystemRoot\sysWOW64\drivers\npf_devolo.sys
Image name: npf_devolo.sys
Timestamp: Fri Feb 02 15:24:05 2007 (45C30335)
CheckSum: 00015803
ImageSize: 0000C000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Your other .dmp shows lot of errors with NVIDIA.

The latest drivers for NVIDIA are a little problematic as I've heard. Click on the Start ► Control Panel ► Programs ► Uninstall a program ► Uninstall everything related to; NVIDIA Reboot the system. Now delete remnants of its drivers using Driver Fusion/Sweeper. Reboot if required

Download and install the drivers from the link of Filehippo bellow:Download NVIDIA Forceware 306.97 WHQL Vista 64 - FileHippo.com

Run the System File Checker that scans the of all protected Windows 7 system files and replaces incorrect corrupted, changed/modified, or damaged versions with the correct versions if possible:SFC /SCANNOW Command - System File Checker
Run Disk Check on your hard disk for file system errors and bad sectors on it:Disk Check
Free up the ... Read more

http://www.sevenforums.com/bsod-help-support/263555-frequent-bsods-ntoskrnl-exe-fltmgr-sys.html
Relevancy 55.9%

I am getting repeated BSODs blaming TCPIP sys and occasionally ntoskrnl exe The first recent one I can (tcpip.sys Frequent ntoskrnl.exe) and sometimes BSODs remember happened a few weeks ago when I installed Frequent BSODs (tcpip.sys and sometimes ntoskrnl.exe) ESET as part of a company-wide antivirus standardisation Then perhaps days ago now it started more regularly a few times per day to the point at which I can't do anything meaningful on my laptop I also noticed that any installer I downloaded directly onto that laptop would come up saying that it was corrupted and wouldn't allow me to install I've had success with one or two since then but also started downloading to another device and then copying the installer across to the bad laptop to run install I've been trawling forums and trying many different things but so far the BSODs continue What I've done so far though I can't remember the order did a system restore to the oldest point I had BSODs continued did windows update after the rollback system restore of the Windows Security Updates KB fails repeatedly Not sure if it's related but did manage to install this manually tried uninstalling the Realtek PCIe Fe Family Controller which an IT guy had said is incorrect for my machine It blue screened a few times on the uninstall or reinstalls itself on restart but I think I just managed to get this unistalled and reinstalled now Reinstalled from the Dell site Realtek RTL E-VB Gigabit and RTL E-VB Ethernet Controller Driver Version A An update for this is now showing under the Optional Windows Updates though when I try update through Device Manager it says the driver is up to date scanned with the new ESET I had installed Blue screened on more than one occasion just before finishing reinstalled Avast which I'd been using before the change to ESET did a proper uninstall of ESET first Did a boot time scan which came up empty scanned with Malwarebytes - came up empty ran CHKDSK it fixed up some things but BSODs continued ran TDSSKiller results attached Right now the BSODs happen frequently and at varied times like on startup on running the scans on trying to install windows on a VM on trying to install reinstall something etc

A:Frequent BSODs (tcpip.sys and sometimes ntoskrnl.exe)

Attached are the results of sfc /scannow I also just ran.

http://www.sevenforums.com/bsod-help-support/351369-frequent-bsods-tcpip-sys-sometimes-ntoskrnl-exe.html
Relevancy 55.9%

Hi there For the last couple days I hadn't Frequent ntoskrnl.exe+14a510 BSODs - been able to use my laptop because the power cable was broken Today I Frequent BSODs - ntoskrnl.exe+14a510 got Frequent BSODs - ntoskrnl.exe+14a510 a new one but for some reason I've been experiencing frequent BSOD's all day The error message I get is Driver Power State Failure so I've been trying to update all my drivers and uninstall those which might be causing a problem according to the Driver Toolkit programme But nothing's worked so far I've also tried to completely reset the laptop but that hasn't worked either Even on safe mode it suddenly stops and undos everything Er what does seem to be working atm is turning off automatic restart after system failure in the settings But that's not good for the laptop right My stats Windows x originally had Windows installed pre-installed The hardware's year and months old I think the OS must be about a year old CPU - Intel Core i Quad Core Mobile Processor i - MQ GHz MB Video card - NVIDIA GeForce GT M - GB DDR Video RAM - DirectX System manufacturer - PC Specialist Clevo Co Model - Cosmos III W SF Thank you so much for the help

http://www.bleepingcomputer.com/forums/t/632044/frequent-bsods-ntoskrnlexe14a510/
Relevancy 55.9%

Frequently I have been getting this BSOD error whilst using my computer, but I have no idea what is specifically making it happen. I have used BlueScreenView to find that ntoskrnl.exe is causing it. There are millions of variations of problems relating to this stop error so I have know idea where to start. My sf diagnostic zip is attached and if you require any other specs, ask me. This is annoying me as I only ever used to get BSODs from playing games, this happens even when just on the web. Any direction or help would be greatly appreciated.

A:Frequent irql_not_less_or_equal caused by ntoskrnl.exe

NT isn't causing it, but it's blamed in the crash because it was walking information in a list that superfetch is supposed to have, but it's been corrupted in some way it seems:

Code:
3: kd> kL
*** Stack trace for last set context - .thread/.cxr resets it
Child-SP RetAddr Call Site
fffff880`17c7d4a0 fffff802`5ca1308d nt!MiFindNodeOrParent+0xf
fffff880`17c7d4e0 fffff802`5ca13438 nt!MiLocateIdInTree+0x1d
fffff880`17c7d540 fffff802`5c9b6385 nt!MiGetSharedProtos+0x64
fffff880`17c7d570 fffff802`5c9b991c nt! ?? ::FNODOBFM::`string'+0x3749f
fffff880`17c7d620 fffff802`5cd60aa1 nt!MiIdentifyPfnWrapper+0x3c
fffff880`17c7d650 fffff802`5cd28b59 nt!PfpPfnPrioRequest+0xc7
fffff880`17c7d6c0 fffff802`5ccca9ab nt!PfQuerySuperfetchInformation+0x2e9
fffff880`17c7d7f0 fffff802`5ccc6c3b nt!ExpQuerySystemInformation+0x1ccb
fffff880`17c7dac0 fffff802`5c8e2453 nt!NtQuerySystemInformation+0x2b
fffff880`17c7db00 000007f8`cb952f4a nt!KiSystemServiceCopyEnd+0x13
000000f9`c555afd8 00000000`00000000 0x000007f8`cb952f4a

3: kd> r
Last set context:
rax=0000000000000000 rbx=0000000000000000 rcx=0000000000000000
rdx=fffff88017c7d500 rsi=0000000000000000 rdi=0000000000000000
rip=fffff8025c942a7f rsp=fffff88017c7d4a0 rbp=0000000000000000
r8=fffff88017c7d550 r9=0000000000000000 r10=024000000031bd37
r11=8000000000000000 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei ng nz na po nc
cs=0010 ss=0018 ds=0000 es=0000 fs=0000 gs=0000 efl=00010286
nt!MiFindNodeOrParent+0xf:
fffff802`5c942a7f 4c8b5918 mov r11,qword ptr [rcx+18h] ds:00000000`00000018=????????????????

3: kd> u
nt!MiFindNodeOrParent+0xf:
fffff802`5c942a7f 4c8b5918 mov r11,qword ptr [rcx+18h]
fffff802`5c942a83 498bf0 mov rsi,r8
fffff802`5c942a86 488bfa mov rdi,rdx
fffff802`5c942a89 488be9 mov rbp,rcx
fffff802`5c942a8c 49f7c300ffffff test r11,0FFFFFFFFFFFFFF00h
fffff802`5c942a93 0f84da000000 je nt!MiFindNodeOrParent+0x103 (fffff802`5c942b73)
fffff802`5c942a99 49c1eb05 shr r11,5
fffff802`5c942a9d 48895c2440 mov qword ptr [rsp+40h],rbx

3: kd> !sysinfo machineid
Machine ID Information [From Smbios 2.7, DMIVersion 39, Size=2630]
BiosVendor = Intel Corp.
BiosVersion = BLH6710H.86A.0159.2012.0927.1423
BiosReleaseDate = 09/27/2012
SystemManufacturer =
SystemProductName =
SystemVersion =
BaseBoardManufacturer = Intel Corporation
BaseBoardProduct = DH67CL
BaseBoardVersion = AAG10212-207

3: kd> !sysinfo cpuinfo
[CPU Information]
~MHz = REG_DWORD 3392
Component Information = REG_BINARY 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
Configuration Data = REG_FULL_RESOURCE_DESCRIPTOR ff,ff,ff,ff,ff,ff,ff,ff,0,0,0,0,0,0,0,0
Identifier = REG_SZ Intel64 Family 6 Model 42 Stepping 7
ProcessorNameString = REG_SZ Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz
Update Status = REG_DWORD 6
VendorIdentifier = REG_SZ GenuineIntel
MSR8B = REG_QWORD 2800000000


Unfortunately, the data uploaded being a set of minidumps it's impossible to say exactly what caused the problem - could be a CPU hardware issue, a BIOS problem, or it could be security software, etc. - without a kernel memory dump, this can't really be pinpointed for sure. However, there is a BIOS update for your motherboard from December 4th of 2012 that I would recommend updating to, as it does contain fixes which could improve system reliability. I can't of course say it's going to help in this scenario, as the data isn't all that helpful due to it being minidump data, but updating all of your drivers and the BIOS would be a good idea here - I've seen this be hardware/BIOS issues more often than not.

http://www.eightforums.com/bsod-crashes-debugging/25667-frequent-irql_not_less_or_equal-caused-ntoskrnl-exe.html
Relevancy 55.9%

Hello,

This has all started since installing EA's Origin in order to play SimCity and Battlefield 3, the later crashes with a BSOD Stop 0x0000001 within about 1 minute of starting, SimCity will give me up to an hour before BSOD'ing.
It's 50:50 whether it's a BSOD or a 'SimCity has stopped working...'

On top of this, I now have randomly applications including Spotify and Chrome just crashing - Chrome has crashed twice in the time it has taken me to write this post.

My hunch is a memory leak somewhere, Memtest completed about 6-7 passes last night with no errors.

Have attached requested logs.

Thank you

A:Frequent BSOD playing SimCity / Frequent applications crashing

Latest MiniDump crash attached.

http://www.sevenforums.com/bsod-help-support/283323-frequent-bsod-playing-simcity-frequent-applications-crashing.html
Relevancy 55.47%

I just recently built a new computer BSOD-ing New ntoskrnl.exe with computer New computer BSOD-ing with ntoskrnl.exe and while setting it up with the usual software chrome evernote word etc it began crashing regularly especially with Chrome Chrome constantly runs out of memory he's dead jim error and the OS windows produces a memory management error with my minidump files finishing with a mention of ntoskrnl exe being the problem The most consistent way to crash the computer is by opening tabs in Chrome at once webcomics folder which will begin to load them freeze and crash While overloading Chrome is consistent in crashing the system has crashed occasionally while doing other things such as installing software and attempting to figure out the crashes Firefox does not seem to crash the system under the tabs but it may have crashed once or twice After reading several other posts about similar problems I've done the suggested tips -I've run memtest which produced no problems in the RAM passes -windows memory diagnostic which produced no problems -sfc scannow which produced no problems -run DPchip and DPnet to update all my drivers it updated a few from my manufacturer's drivers from the site asus Z -a MB -remove all ASUS bloatware and turn on XMP in my bios latest version My computer is a fresh build aside from general software so all my information is backed up and I'm not opposed to a reformat and re-install of windows though I'd prefer to avoid that timesink My diagnostic info is uploaded here for y'all

A:New computer BSOD-ing with ntoskrnl.exe

Update: I updated a few minor drivers that I had missed from 3DPchip but the chrome overload test of mine (31 tabs) still crashed the system.

It then occurred to me that my new desktop was still on the floor on top of carpet which was likely impeding the airflow into my PSU. After putting the box on my desk, my overload test loads all of the tabs fully with no issues (no dead jims). I'll add another post if problems persist but the stability seems to fixed itself out. Win!

TL;DR: I'm a moron, put your desktop on a flat non-carpeted surface.

http://www.eightforums.com/bsod-crashes-debugging/60702-new-computer-bsod-ing-ntoskrnl-exe.html
Relevancy 55.47%

Hello, I have a gnarly issue with a clean install of Windows 10 enterprise on a new computer.
A preview of the mini dump you have here Capture.JPG - Google Drive
I did the steps for a complete data collection about it here. Attachment 110542
Any kind of help will be gladly received. I really have no idea what to do next.
Thank you!

http://www.tenforums.com/bsod-crashes-debugging/70170-bsod-ntoskrnl-exe-while-normally-using-computer.html
Relevancy 55.47%

Hello,
I'm hoping someone can help as this is so frustrating. I have a Dell 8700xps running windows 8 and I keep getting crashes. If I try gaming it happens for sure, anywhere from a couple minutes in to 10-15 min. I can never play longer than that before a crash happens. Otherwise the crashes just happen at random times. I've used BlueSceenView and it always points to ntoskrnl. I have run every test I can find on my hard rive and on my RAM with everything checking out. So Im thinking it should be a driver issue but don't know how to identify it or at least narrow it down. Any help would be appreciated.

Here are my 2 latest crash dumps

A:ntoskrnl bsod - please help new computer

Hi albert83,

Please follow the directions for posting located here..

Blue Screen of Death (BSOD) Posting Instructions

http://www.eightforums.com/bsod-crashes-debugging/38047-ntoskrnl-bsod-please-help-new-computer.html
Relevancy 55.04%

Hi,
I've been getting a lot of BSoDs lately. I'm getting BSoD VERY often, which is very frustrating.. I've been trying to find what the problem is, but no result at all.
Please help me find the roots of the problem and help me fix it?
Thanks a lot!

A:Very frequent BSoDs - iastorA.sys and ntoskrnl.exe related

update your Intel RST (Rapid Storage Technology) driver to the latest version possible.

Intel Download Center

http://www.sevenforums.com/bsod-help-support/271837-very-frequent-bsods-iastora-sys-ntoskrnl-exe-related.html
Relevancy 55.04%

Hello,

I have been having quite a few problems with Blue screens recently, mostly whilst playing games (Battlefield 3, Grid 2) although sometimes whilst browsing the web. According to BluescreenView Ntoskrnl.exe has been one of the main causes of crashes every time, sometimes other things are involved too.

System info:
Windows 7 64bit (OEM) installed approximately 10 months ago onto my SSD, was on an HDD that I still use beforehand.
Motherboard, CPU & half the RAM are all about 4 years old, HDDs vary from 6 years old to approximately 6 months. The other half of the RAM is about 2 years old as is the graphics card.

CPU: Intel Core 2 Quad 2.5 GHZ
Mobo: Asus P5Q SE Plus
Graphics: MSI GTX 550Ti Cyclone II OC with 1GB GDDR 5
PSU: Zalman ZM600-ST 600W

No model info as it's a self-build system.

Thanks very much for your help,

Matt

A:[SOLVED] Frequent BSODs in Windows 7 - Ntoskrnl?

"It's not a true crash, in the sense that the Blue Screen was initiated only because the combination of video driver and video hardware was being unresponsive, and not because of any synchronous processing exception".

Since Vista, the "Timeout Detection and Recovery" (TDR) components of the OS video subsystem have been capable of doing some truly impressive things to try to recover from issues which would have caused earlier OS's like XP to crash.

As a last resort, the TDR subsystem sends the video driver a "please restart yourself now!" command and waits a few seconds.
If there's no response, the OS concludes that the video driver/hardware combo has truly collapsed in a heap, and it fires off that stop 0x116 BSOD.

If playing with video driver versions hasn't helped, make sure the box is not overheating.
Try removing a side panel and aiming a big mains fan straight at the motherboard and GPU.
Run it like that for a few hours or days - long enough to ascertain whether cooler temperatures make a difference.

If so, it might be as simple as dust buildup and subsequently inadequate cooling.

I would download cpu-z and gpu-z (both free) and keep an eye on the video temps

For more information please read this blog Bug Check 0x116: VIDEO_TDR_ERROR Troubleshooting Tips | Captain Debugger

http://www.techsupportforum.com/forums/f299/solved-frequent-bsods-in-windows-7-ntoskrnl-697622.html
Relevancy 55.04%

Dear Seven Forums I'm looking for help regarding my pc that I built months ago I am having random crashes of all types - of the games crash to desktop after - minutes Overwatch Eu Hoi CIV V is OK Witcher - can't use chrome firefox for more than - minutes because of either 'Oops something went wrong' or the applications close without error - Randomly appearing crashes of antimalware-service and explorer exe and of course Frequent (050,f7,fc,3b,1e), and service frequent crashes BSOD chrome many blue screens while Frequent BSOD (050,f7,fc,3b,1e), frequent service and chrome crashes 'browsing' playing What I've also noticed that I can go playing EU Warthunder - hours without issues and then suddenly keep BSODing the next - restarts I've filled out the PC specs in my profile What I've already tried -I've reinstalled Win times and reinstalled Win times All of the fresh installs resulted in blue screens - I've also tried adjusting BIOS settings like setting tad higher RAM voltage CPU voltage running the PCIE in x or x Mode and using XMP settings The recent - blue screens happened with all the BIOS settings reverted using 'Restore default settings' - I've been using x Mhz Kingston DDR Rams the first months but replaced them with the Corsair ones in hopes of solving the BSODs I've done a clean install BIOS reset after replacing the RAM -edit I've also tried disabling hardware acceleration in hopes of solving the chrome crashes Looking for tips to finally be able to identify the faulty driver hardware Thanks

A:Frequent BSOD (050,f7,fc,3b,1e), frequent service and chrome crashes

   Warning
Programs that claim to update your drivers install either the wrong or corrupted drivers.
If you have installed any driver with Driver Booster 3, please remove them as it may cause trouble.

An easy way to get remove these drivers is by using a restore point prior the installation.

Please ensure that all overclocking is removed for RAM, CPU & GPU while troubleshooting.

How are the graphics drivers currently installed? Windows Update or?

http://www.sevenforums.com/bsod-help-support/398264-frequent-bsod-050-f7-fc-3b-1e-frequent-service-chrome-crashes.html
Relevancy 55.04%

Hello everyone I have built this machine after my old one died burned after suspected psu BSOD idle, ntoskrnl.exe computer while failure Anyway BSOD while computer idle, ntoskrnl.exe I formatted the SSD and reinstalled windows x Unfortunately I keep getting BSODs in random situations - mostly when the PC is being idle but sometimes when I'm surfing the web I have not experienced any crashes during playing games At first I had HD taken from the old computer however I was experiencing video driver crashes and sometimes bsods during web surfing not gaming I tried reseating the card but that did not really help it kinda got worse so I removed it That seemed to help for a few days but the bsod are back BSOD while computer idle, ntoskrnl.exe now What I did I ran memtest for like hours no errors Chkdsk - no errors Enable driver verifier - gt caused a bsod blaming gdrv sys I uninstalled all gigabyte apps and renamed gdrv sys to gdrv old system booted up ok but after some idle time bsod again it said fltmgr sys was probably to blame Comodo seems to cause a bsod when verifier is enabled and I try to run SF Diagnostic Tool so i ran it from safe mode Success but I decided to reboot and disable C antivirus amp auto-sandbox that solved the cmdguard crash issue so I'm not sure if the last dumps are relevant I am clueless about the bsod cause please help

A:BSOD while computer idle, ntoskrnl.exe

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck C4, {e3, fffff880088a838d, 1fe300, 0}

*** WARNING: Unable to verify timestamp for cmdguard.sys
*** ERROR: Module load completed but symbols could not be loaded for cmdguard.sys
Probably caused by : cmdguard.sys ( cmdguard+838d )

Followup: MachineOwner
---------
Uninstall Comodo Firewall - use Windows firewall instead and monitor for further BSOD's.

http://www.sevenforums.com/bsod-help-support/359398-bsod-while-computer-idle-ntoskrnl-exe.html
Relevancy 55.04%

Hello, i have been running into some of these problems with ntoskrnl.exe

MEMORY_MANAGEMENT
DRIVER_OVERRAN_STACK_BUFFER
IRQL_NOT_LESS_OR_EQUAL

I cannot seem to figure out what is wrong and i have updated all my drivers!

Dumps.zip

A:BSOD ntoskrnl.exe new computer built!

BSOD Posting Instructions

http://www.tenforums.com/bsod-crashes-debugging/59247-bsod-ntoskrnl-exe-new-computer-built.html
Relevancy 55.04%

I have had a few times the past few days when logging on to computer that it says it is recovering from a BSOD. BSOD occurred when noone was using the computer.

A:BSOD multiple times, noone using computer, more frequent past few days

Blue Screen of Death (BSOD) Posting Instructions

http://www.sevenforums.com/bsod-help-support/387532-bsod-multiple-times-noone-using-computer-more-frequent-past-few-days.html
Relevancy 55.04%

Hi
Thanks in advance for any help. This has happened quite often, but I think I don't often know as he just restarts. Here is info as per guidance. Also, files attached.

Windows 7 Home Premium SP1. 64 bit. Installed by Dell on this new laptop computer.
Dell XPS L502X
System only 3 weeks old.

CPU: i7-2670QM 2.20ghz turbo boost up to 3.1ghz
Memory: 6.144Mb
Graphics card: 2GB NVIDIA GeForce GT 540M Graphics Card
HD: 750GB serial ATA 7200rpm

Have replaced free McAfee 1 month trial with ZoneAlarm Internet Security Suite 10.0.250.000. (Had a BSOD problem when I installed ZA before uninstalling McAfee and had to uninstall McAfee in safe mode. Then thought all resolved.)

Have installed Open Office, Chrome, Firefox. There are some other things installed such as WinRar. My son has installed a couple of things, but as he does not have Admin rights, this is limited.

Thanks

A:BSOD - son's computer so activity at time unknown. Fairly frequent.

Hello shaggydog,

* Your crash log indicates you STILL have the following malware programs installed.

*Kaspersky
Please remove it
http://support.kaspersky.com/downloa...vremover10.zip

* Remove Zone Alarm
http://download.zonealarm.com/bin/fr...cpes_clean.exe

* We recommend that you install MSE for testing purposes
Microsoft Security Essentials - Free Antivirus for Windows

*Also note your Video driver was involved & needs to be reinstalled with the newest version.
When upgrading your graphic driver you MUST remove all traces of the current driver.
In order to do that we recommend using
Phyxion.net - Driver Sweeper

When it is removed then download and install the fresh copy.

http://www.sevenforums.com/bsod-help-support/197753-bsod-sons-computer-so-activity-time-unknown-fairly-frequent.html
Relevancy 55.04%

Hi guys sleep when sometimes from computer semi-frequent rate, at BSOD boots I made a custom built computer about half a year ago and since that time I've been having pretty regular BSODs and other problems I have GB x GB of RAM and on my own I've ran memtest for BSOD at semi-frequent rate, sometimes when computer boots from sleep hours without problem with both in and one stick at a time I also have a R x and a W good BSOD at semi-frequent rate, sometimes when computer boots from sleep PSU so maybe power is a problem but I don't have a way to test that Anyway I've tried following the instructions for posting here but whenever run the dm log collector the application collects logs and everything automatically without asking me where to save so I have no idea where to find the file I need Here's a copy and paste of my latest minidump file though if it's of any use Code Bugcheck Analysis DRIVER IRQL NOT LESS OR EQUAL d An attempt was made to access a pageable or completely invalid address at an interrupt request level IRQL that is too high This is usually caused by drivers using improper addresses If kernel debugger is available get stack backtrace Arguments Arg fffff bfa memory referenced Arg IRQL Arg value read operation write operation Arg fffff a e f address which referenced memory Debugging Details ------------------ WRITE ADDRESS GetPointerFromAddress unable to read from fffff fffff bfa CURRENT IRQL FAULTING IP tcpip TtStopTimer f fffff a e f mov qword ptr r rax CUSTOMER CRASH COUNT DEFAULT BUCKET ID VISTA DRIVER FAULT BUGCHECK STR xD PROCESS NAME System TRAP FRAME fffff b a -- trap xfffff b a NOTE The trap frame does not contain all registers Some register values may be zeroed or incorrect rax fffffa bfa rbx rcx fffffa afa e rdx fffffa bfa rsi rdi rip fffff a e f rsp fffff b bd rbp r fffff bfa r fffffa bfa r fffff b e r f r r r r iopl nv up ei pl nz na pe nc tcpip TtStopTimer xf fffff a e f mov qword ptr r rax ds fffff bfa Resetting default scope LAST CONTROL TRANSFER from fffff c e to fffff c c STACK TEXT fffff b f fffff c e a fffff bfa nt KeBugCheckEx fffff b fffff c ae fffff cc fffff d f fffff b d a fffffa bfa e nt KiBugCheckDispatch x fffff b a fffff a e f fffff a fa fffffa b fffff a dfe fffff b c nt KiPageFault x fffff b bd fffff a fa fffffa b fffff a dfe fffff b c tcpip TtStopTimer xf fffff b be fffff a e e tcpip IppUninitializeNeighbor x a fffff b c fffff a d fffffa b e d fffffa b e e tcpip IppResetNeighborUnderLock x e fffff b c fffff a cc fffffa b e d fffffa b b tcpip IppResetNeighborsUnderNSLock xde fffff b cb fffff a d f fffffa b e e fffff b e fffffa b e e tcpip IppReconnectSubInterface x c fffff b d fffff a c fffff b e fffff b f fffffa b e e fffffa b e d tcpip IppSetSubInterfaceLinkStatusUnderLock x f fffff b d fffff a cf fffffa b ea f fffff ba tcpip IpFlcUpdateSubInterface x fffff b de fffff bc fffffa fffffa b tcpip FlStatus x fffff b e fffff a c fffffa b c fffffa a c a fffffa a c a fffffa b c ndis ndisIndicateStatusInternal x ec fffff b a b fffff a fffffa b fffff b a ndis NdisFIndicateStatus x c fffff b a fffff e b fffff fffffa b fffff b a ndis NdisFIndicateStatus x fffff b a f fffff cf e a fffff ec fffffa a c a pacer PcFilterStatus x fffff b a fffff dfd ffff e a fffff ec ndis NdisMIndicateStatusEx x f fffff b a ffff e a fffff ec Rt win x fd fffff b a ffff e a fffff ec x fffff b a ffff e a fffff ec b aca x fffff b a fffff ec b aca b aca xffff e a fffff b a fffff b a hal HalpTscStallExecutionProcessor xe STACK COMMAND kb FOLLOWUP IP pacer PcFilterStatus fffff e b eb jmp pacer PcFilterStatus xa fffff e c SYMBOL STACK INDEX e SYMBOL NAME pacer PcFilterStatus FOLLOWUP NAME MachineOwner MODULE NAME pacer IMAGE NAME pacer sys DEBUG FLR IMAGE TIMESTAMP ce a FAILURE BUCKET ID X xD pacer PcFilterStatus BUCKET ID X xD pacer PcFilterStatus Followup MachineOwner

A:BSOD at semi-frequent rate, sometimes when computer boots from sleep

Blue Screen of Death (BSOD) Posting Instructions

http://www.sevenforums.com/bsod-help-support/370062-bsod-semi-frequent-rate-sometimes-when-computer-boots-sleep.html
Relevancy 54.61%

Hi all I decided to upgrade both of my dell optiplex machines with an Intel SSD GB and clean install Windows -bit Setup went smoothly However after all updates and drivers were installed I started getting random frequent BSOD crashes with nearly all of them pointing to ntoskrnl exe I don't think I've ever even encountered a blue screen back when I used my old HDD I suspected bad RAM at first but Memtest showed no errors after running for hours each stick I know it has something to do with BSODs Random, Frequent ntoskrnl.exe+75169 Seemingly -- the SSD but I just can't figure it out Dump info attached Unfortunately one of my machines ntoskrnl.exe+75169 -- Seemingly Random, Frequent BSODs which already experienced many BSODs is in a different city ntoskrnl.exe+75169 -- Seemingly Random, Frequent BSODs and I can't access it at the moment I have just finished the second machine and just got my first BSOD Ideally I would like to have several BSODs so I cant establish some kind of pattern but maybe we can make progress by checking out the first BSOD since most of them will ntoskrnl.exe+75169 -- Seemingly Random, Frequent BSODs probably be identical anyway Thank you so much They are configured basically the same Core Quad GB RAM x GB HIS Radeon HD

A:ntoskrnl.exe+75169 -- Seemingly Random, Frequent BSODs

There are no .dmp files present in the ZIP file.

Do this:
1. Check if there are .dmp files in C:\Windows\Minidump
- if "Yes", use 7ZIP and upload them here in your next reply
- if "No", follow steps 2 to 3 below

2. Enable .dmp file creation: (Small dump file / minidump is fine)
Dump Files - Configure Windows to Create on BSOD

3. Run Driver Verfiier as explained here:

Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.
Driver Verifier - Enable and Disable

Driver Verifier will cause your computer to run very sluggishly - this is normal. What it is trying to do is force your system to BSOD and isolate the offending driver/s. When it does, reboot, disable driver verifier, reboot as normal and upload the new dmp file/s here.

I recommend creating a system restore point before turning on driver verifier:
System Restore Point - Create

If your system fails to boot to desktop once driver verifier is enabled, turn it off by booting into Safe Mode:
Safe Mode

http://www.sevenforums.com/bsod-help-support/358294-ntoskrnl-exe-75169-seemingly-random-frequent-bsods.html
Relevancy 54.18%

Hello recently I have just built my new computer and everything seemed to playing BSOD computer, while ntoskrnl.exe+7f1c0 using be going fine However I had gotten a BSOD when trying to copy a large amount of file from my external Although I BSOD while playing using computer, ntoskrnl.exe+7f1c0 didn't get the dump file of it as that wasn't BSOD while playing using computer, ntoskrnl.exe+7f1c0 in the settings at the time I assumed it was due to copying from the external and just copied smaller files and it hasn't happened again However I was just playing League of Legends and my computer decided to randomly BSOD So I downloaded SF Diagnostic Tool and zipped the folder so I was wondering as what the problem is BlueScreenView says the crash address is ntoskrnl exe f c and I wasn't sure if this was a hardware or BSOD while playing using computer, ntoskrnl.exe+7f1c0 software problem as I have only received the parts less than a week ago My specs are Gigabyte Z -D H motherboard Intel Core i - processor gig of Corsair Vengeance RAM GeForce GTX graphics card Any help would be greatly appreciated

A:BSOD while playing using computer, ntoskrnl.exe+7f1c0

Welcome aboard, Balvedius

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 50, {fffff6a000022640, 0, fffff80002eb4b2b, 5}
Could not read faulting driver name
Probably caused by : memory_corruption ( nt!MiAgeWorkingSet+1d1 )
At first, you are to run RAM - Test with Memtest86+ . run it for 8 passes.

As the crash is hardware related, you are suggested to take two more testsHardware - Stress Test With Prime95, and
run chkdsk/F/R, using the method two of the tutorial Disk Check.

Let us know the results.

http://www.sevenforums.com/bsod-help-support/250256-bsod-while-playing-using-computer-ntoskrnl-exe-7f1c0.html
Relevancy 54.18%

Hope everyone else is having a good Christmas I first built this PC two years then got ntoskrnl.exe computer BSOD now hangs, Random ago late in the first years the PC worked great Random computer hangs, then now got ntoskrnl.exe BSOD not a single problem Then in early this year my computer started getting errors this was when I still had windows first it was random I O write errors which doesn t cause hang or BSOD it simply shutdown my computer automatically after a few seconds then I occasionally get BSOD Back then I had to prepare for my high school exams so I didn t look into it and thought it was just a windows bug So fast forward to now last month I bought the windows and did a complete clean reinstall give up on all Random computer hangs, then now got ntoskrnl.exe BSOD my old files And the problem is still here well not exactly the same problem My windows doesn t experience I O write errors any more instead it started hanging stop responding with multiple applications completely at random both in terms of which application and when it Random computer hangs, then now got ntoskrnl.exe BSOD happens the computer would also stop responding when these application hangs freezes the mouse moves but nothing happens when clicking on the items and the only thing to do is a hard reset However since its not a BSOD it doesn t create dump files for analysis Luckily last night the BSOD happened and I got a dump can someone help me pls now the hang is happening everyday its unbearable Event viewer and reliability monitor doesn t say anything specific just app hang or unexpectedly shutdown My reliability index is at much appreciated I have upgrade my PC since I had the PC problems for example - Radeon HD to x GTX in SLI - OCZ modxstream W to GS w psu from Corsair So I think we can rule out the above My full spec - Nzxt Phantom white red case - Ga-z x-ud -b motherboard - I k CPU overclocked at Ghz - Kingston Hyperx ram - GTX x in SLI - Corsair GS w PSU - Vertex GB SSD for windows - Kingston Hyperx k SSD for often used programs - x TB HDD in Motherboard Raid for games storage I have tried running memtest on my ram all of it passes no error I tried disable my CPU overclock too but the problems is still there

A:Random computer hangs, then now got ntoskrnl.exe BSOD

If you're overclocking, please stop the overclock while we're troubleshooting. Feel free to resume the overclock once the system has been stabilized.

SSD's were temperamental when they first came out, but their reliability has improved greatly over the last year or two. There are 2 things that MUST be checked on systems with BSOD's and SSD's:




1) That the SSD firmware is the latest available for the SSD. I usually can't see this info in the reports, so I rely on you to check it.
2) That the storage controller drivers on the motherboard are the most recent. They must date from late 2012 or later. This is ALL controllers, not just the one that the SSD is attached to. If involved these should be visible in the memory dump - but it doesn't hurt to check manually.



D: drive only has about 10% free space. Windows likes 15% free space in order to perform stuff "behind the scenes" without adversely affecting the system's performance. Please free up 15% on ALL hard drives (you can get away with 10% on larger drives and won't notice a large performance penalty)

You have at least 5 hard drives. What is the age of your Corsair GS800 Power Supply?

Please update the Intel Management Engine (yours dates from 2010):





Try these links:
https://downloadcenter.intel.com/Det...ngine&lang=eng
https://downloadcenter.intel.com/Det...ngine&lang=eng
https://downloadcenter.intel.com/Det...ngine&lang=eng

If that doesn't work, then try these Lenovo links:
Intel Management Engine Interface Driver for Windows 8.1 (64-bit), 8 (64-bit) - Notebook
http://support.lenovo.com/en_US/down...DocID=DS032435

Finally, here's the link to the search I used:
https://www.google.com/search?q=inte...ient=firefox-a

FWIW - It's a feature that allows you to manage the BIOS features from within Windows (more technical stuff to be found here: Intel? Active Management Technology (Intel? AMT) Start Here Guide (Intel AMT 9.0) | Intel? Developer Zone )



Please note the drivers below that date from before the release of Windows 8.1 (17 Oct 2013) - check to see that each and every one is compatible w/Windows 8.1 (at the manufacturer's website). If not, you must either remove the device and it's software - or locate a Windows 8.1 compatible update on the web.

If all of this doesn't stop the BSOD's, please run Driver Verifier according to these instructions: Driver Verifier Settings

Analysis:
The following is for informational purposes only.

Code:
**************************Mon Dec 23 20:11:31.584 2013 (UTC - 5:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\122413-147015-01.dmp]
Windows 8 Kernel Version 9600 MP (4 procs) Free x64
Built by: 9600.16452.amd64fre.winblue_gdr.131030-1505
System Uptime:0 days 4:36:19.234
Probably caused by :csrss.exe
BugCheck EF, {ffffe0000f139900, 0, 0, 0}
BugCheck Info: CRITICAL_PROCESS_DIED (ef)
Arguments:
Arg1: ffffe0000f139900, Process object or thread object
Arg2: 0000000000000000, If this is 0, a process died. If this is 1, a thread died.
Arg3: 0000000000000000
Arg4: 0000000000000000
PROCESS_NAME: csrss.exe
BUGCHECK_STR: 0xEF_f7e57c0
FAILURE_BUCKET_ID: 0xEF_f7e57c0_IMAGE_csrss.exe
CPUID: "Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz"
MaxSpeed: 3300
CurrentSpeed: 3310
BIOS Version F10
BIOS Release Date 02/21/2012
Manufacturer Gigabyte Technology Co., Ltd.
Product Name Z68X-UD4-B3
??????????????????????????????????????????????????????????????????????????????????????``



3rd Party Drivers:
The following is for information purposes only.
Any drivers in red should be updated or removed from your system. And should have been discussed in the body of my post.

Code:
**************************Mon Dec 23 20:11:31.584 2013 (UTC - 5:00)**************************
HECIx64.sys Tue Sep 21 12:59:04 2010 (4C98E458)... Read more

http://www.eightforums.com/bsod-crashes-debugging/37758-random-computer-hangs-then-now-got-ntoskrnl-exe-bsod.html