Windows Support Forum

BSODs after first boot of the day: 0x00000109 / ntoskrnl.exe+7f1c0

Q: BSODs after first boot of the day: 0x00000109 / ntoskrnl.exe+7f1c0

Hello I have had two BSODs this week one on Monday and the other one today Thursday Both occured within minutes after Windows had been started resumed from hibernation for the first time that day The same thing happened a few months ago I'm after / first of boot the BSODs 0x00000109 ntoskrnl.exe+7f1c0 day: beginning to see a pattern Other than these quot morning quot BSODs my laptop is operating quite stable It's being used about hours a day yet I have never had a BSOD other than those after the first start of the day Because of this BSODs after first boot of the day: 0x00000109 / ntoskrnl.exe+7f1c0 my gut BSODs after first boot of the day: 0x00000109 / ntoskrnl.exe+7f1c0 feeling is that this is more likely a hardware related BSOD Maybe some part or device is unable to handle the initial temperature rise after cooling down over night Although the laptop is always stored at room temperature Another pattern is that BlueScreenView displays the same values for all three BSODs in these columns Bug Check Code x Parameter a a d Parameter b b e Parameter fffff Parameter Crash Address ntoskrnl exe f c Minidump files are attached Event viewer shows no unusual events between Windows start and BSOD I'm using a genuine Windows copy always with the newest updates from Microsoft and my drivers and BIOS are up to date too BSODs after first boot of the day: 0x00000109 / ntoskrnl.exe+7f1c0 I'm currently running Driver Verifier to see if I can catch a BSOD this way My hardware checks so far RAM memtest found no errors after passes neither did Windows' own Memory Diagnostics Tool I even ran memtest again after letting the laptop cool down to see if the memory would behave differently but still no errors PSU Stated output is V I measured V Seems ok to me HDD Ran various tests HDD scans filesystem checks no errors or bad sectors Any suggestions or interpretations of my minidump files are appreciated

Relevancy 100%
Preferred Solution: BSODs after first boot of the day: 0x00000109 / ntoskrnl.exe+7f1c0

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: BSODs after first boot of the day: 0x00000109 / ntoskrnl.exe+7f1c0

Please upload your msinfo32.nfo file. To get this:
Click on the Start
Type msinfo32 into the Search programs and files box
When it opens, go to File, Save
Save as msinfo32.nfo and save in a place you will remember
Let it finish the process of gathering and saving the system info
Right click the .nfo file, click send to compressed (zipped) folder
Upload the .zip file here.

http://www.sevenforums.com/bsod-help-support/252683-bsods-after-first-boot-day-0x00000109-ntoskrnl-exe-7f1c0.html
Relevancy 88.15%

I've been using ubuntu on a Live USB to compile some of my C homework I disabled wireless within ubuntu When I restarted into Windows I received an error about a hardware switch being turned off and was unable to use fn f to turn it back on I restarted my pc and went into the live usb again When I went back into windows the wireless was available but my computer BSOD's almost immediately after logging in I am able to boot into SafeMode with networking so Using BSOD on ntoskrnl.exe+7f1c0 Live USB After Ubuntu Boot I'm not sure if the wireless if the actual issue or a related event at all I have run chkdsk r memcheck and have rolled back and then reinstalled the new build of my graphics driver In BlueScreenView I see ntoskrnl exe and PSHED dll listed as the top two events and other BSOD on Boot ntoskrnl.exe+7f1c0 After Using Ubuntu Live USB threads said that PSHED dll was graphics related but that did not ultimately solve the issue I've BSOD on Boot ntoskrnl.exe+7f1c0 After Using Ubuntu Live USB attacked the MiniDump files I have too much ram for a full dump I've also attached the SF Results Thanks for any help that you may be able to offer

A:BSOD on Boot ntoskrnl.exe+7f1c0 After Using Ubuntu Live USB

Welcome aboard.

Here is your actual problem:

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

REGISTRY_ERROR (51)
Something has gone badly wrong with the registry. If a kernel debugger
is available, get a stack trace. It can also indicate that the registry got
an I/O error while trying to read one of its files, so it can be caused by
hardware problems or filesystem corruption.
It may occur due to a failure in a refresh operation, which is used only
in by the security system, and then only when resource limits are encountered.
Arguments:
Arg1: 0000000000000001, (reserved)
Arg2: fffff8a000024370, (reserved)
Arg3: 0000000001643000, depends on where Windows bugchecked, may be pointer to hive
Arg4: 0000000000000374, depends on where Windows bugchecked, may be return code of
HvCheckHive if the hive is corrupt.
In such a situation, you first boot into Advanced Boot Options, choose "last known good configuration" and hit enter, see if it boots or not.

In a deeper analysis of your dump, it indicates Kaspersky :

Code:
fffff880`08f4e838 fffff880`0471a7bfUnable to load image \SystemRoot\system32\DRIVERS\klif.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for klif.sys
*** ERROR: Module load completed but symbols could not be loaded for klif.sys
klif+0x267bf
When we see an Antivirus is there behind the crashes, we suggest to uninstall it and use Microsoft Security Essentials - Free Antivirus for Windows.

But, as the Registry is already corrupted, uninstalling Kaspersky will not bring it back to normal, it just will protect the system from getting more corrupt.

If both of those options fail, do SFC /SCANNOW : Run in Command Prompt at Boot

If it also failed, do a Clean Install Windows 7

Let us know the results.

EDIT: Uninstall the following programs:
Catalyst Control Center
DAEMON Tools Lite
Defraggler
MSI Afterburner
Free up the startup. (you have 30 programs in startup)

Click on the Start button
Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the “Startup” tab.
Deselect all items other than the antivirus.
Apply > OK
Accept the restart.

http://www.sevenforums.com/bsod-help-support/257276-bsod-boot-ntoskrnl-exe-7f1c0-after-using-ubuntu-live-usb.html
Relevancy 74.82%

I have been getting a BSOD in my fresh Windows install, I'm running Windows 7 Pro x64 (MSDNAA).

I had done a clean install after I got a couple of BSOD f4 but now I'm still getting the same BSOD! I've already collected some dump with and without running Driver Verifier.

Before clean install I updated my BIOS, I updated SSD firmware and I runned a memtest: my ram passed the test.

sfc /scannow report: "Windows Resource Protection did not find any integrity violations."

When I runned Windows_NT6_BSOD_v3.03_jcgriff2_.exe I got a BSOD because of HIDCLASS.SYS

Hopefully i can get some help here

PS: sorry for my poor English

A:BSOD f4, ntoskrnl.exe-7f1c0

Problem Devices:
Code:
ehdrv ROOT\LEGACY_EHDRV\0000 This device is not present, is not working properly, or does not have all its drivers installed.
epfwwfp ROOT\LEGACY_EPFWWFP\0000 This device is not present, is not working properly, or does not have all its drivers installed.
Network Controller PCI\VEN_168C&DEV_0023&SUBSYS_3071168C&REV_01\5&D93DF5B&0&0800E6 The drivers for this device are not installed.
Security Processor Loader Driver ROOT\LEGACY_SPLDR\0000 This device is not present, is not working properly, or does not have all its drivers installed.
Was the crash report jcgriff2 executable run in Safe Mode? Make sure the above drivers get installed to provide system stability. If you need help with the drivers, fill in your system specs in your profile and not in a post in this thread: System Info - See Your System Specs
What kind of memtest did you run? How many passes?

Your crashes primarily indicate hard disk problems. This could mean hard disk corruption, bad sectors, a failing hard disk, Windows files or registry corruption, viruses, or memory problems.If you are overclocking any hardware, please stop.

Run Disk Check with both boxes checked for all HDDs and with Automatically fix file system errors checked for all SSDs. Post back your logs for the checks after finding them using Check Disk (chkdsk) - Read Event Viewer Log (you may need to search for wininit instead of chkdsk).
For any drives that do not give the message:
Windows has checked the file system and found no problems
run disk check again as above. In other words, if it says:
Windows has made corrections to the file system
after running the disk check, run the disk check again.

Run the short and long tests with SeaTools for HDDs.SeaTools for Windows

SeaTools for DOS
If you have an SSD, make sure the following are up to date:SSD firmware
BIOS Version
Chipset Drivers
Hard disk controller drivers/SATA drivers
If you have a Marvell IDE ATA/ATAPI device, uninstall it in device manager and see if the system performs better.

Download and install Malwarebytes, update it, do not start the free trial, and then run a full scan. Also run a full scan with your antivirus software installed on your system. If you do not have antivirus software installed, see the Good and Free system security combination. for better security steps and scanning tools. Make sure to update the security software before running the full scan.

Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).


   Warning
Before you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. WARNING: The steps that follow can void your warranty!!!

For Part 3: If You Have Errors: If you swap any memory components, follow these steps for ESD safety:Shut down and turn off your computer.
Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working. If you do not have an anti-static workbench, desk, or pad, you can use your computer tower/case by fi... Read more

http://www.sevenforums.com/bsod-help-support/232749-bsod-f4-ntoskrnl-exe-7f1c0.html
Relevancy 73.96%

My wife's Sony Vaio (VPCEE41FD) laptop has been acting up over the last few nights.
It would hang up on shutting down, taking sometimes over an hour+

Just tonight it decided to BSOD stating driver_power_state_failure ntoskrnl.exe+7f1c0
If I recall, I think this happened about a month ago as well.
Nothing was being done at the time of the BSOD and I have it set to not hibernate or sleep, just power off the display.

Any suggestions or help are greatly appreciated. Thank you in advance.
Attached is the requested/required diagnostic logs from the SF Diag Tool.

A:bsod driver_power_state_failure ntoskrnl.exe+7f1c0

Welcome aboard, Risk.

► I suggest you to uninstall Avast, right now. It is must in your situation.
Use Microsoft Security Essentials - Free Antivirus for Windows, with Windows firewall.
Avast firewall is causing a huge lot of troubles there.

► And, update your Atheros network adapter driver, from ATHEROS drivers for Microsoft Windows (Atheros?????).

Code:
0: kd> lmvm athrx
start end module name
fffff880`04426000 fffff880`045a5000 athrx T (no symbols)
Loaded symbol image file: athrx.sys
Image path: \SystemRoot\system32\DRIVERS\athrx.sys
Image name: athrx.sys
Timestamp: Sat Nov 07 02:26:02 2009 (4AF48D62)
CheckSum: 00185986
ImageSize: 0017F000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
You can see that the driver installed is very old.

► ATI Video Driver is causing equal troubles.

Code:
kd> lmvm atikmpag
start end module name
fffff880`04185000 fffff880`041b9000 atikmpag T (no symbols)
Loaded symbol image file: atikmpag.sys
Image path: \SystemRoot\system32\DRIVERS\atikmpag.sys
Image name: atikmpag.sys
Timestamp: Tue Jul 13 15:21:00 2010 (4C3C3704)
CheckSum: 00030E73
ImageSize: 00034000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
It is also very old and needs an update. Get it from AMD Support & Drivers.

► Auslogics is not a good example of a program. I recommend Puran Defrag.

Let us know the situation.

http://www.sevenforums.com/bsod-help-support/254023-bsod-driver_power_state_failure-ntoskrnl-exe-7f1c0.html
Relevancy 73.96%

My computer working always good most bsod coming without reason on a day i seeing not reason for this pc have not many load ram test with memtest working over houres without problems here bsod logs anybody have without 7f1c0 BSOD reason? ntoskrnl.exe idea sorry for my bad english this crash coming on a burnintest Code Dump File - - dmp Crash Time Bug Check String PAGE FAULT IN NONPAGED AREA Bug Check Code x Parameter fffffd c c c Parameter Parameter fffff a Parameter Caused By Driver win k sys Caused By Address win k BSOD without reason? ntoskrnl.exe 7f1c0 sys b File Description Product Name Company File Version Processor x Crash Address ntoskrnl exe f c Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size thois coming without load Code Dump File - - dmp Crash Time Bug Check String PAGE FAULT IN NONPAGED AREA Bug Check Code x Parameter fffffaa b Parameter Parameter fffff f Parameter Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe f c File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win sp gdr - Processor x Crash Address ntoskrnl exe f c Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time Bug Check String PAGE FAULT IN NONPAGED AREA Bug Check Code x Parameter fffffa c c c b Parameter Parameter fffff d f Parameter Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe f c File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win sp gdr - Processor x Crash Address ntoskrnl exe f c Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time Bug Check String PAGE FAULT IN NONPAGED AREA Bug Check Code x Parameter fffffa c ee b Parameter Parameter fffff c d f Parameter Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe f c File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win sp gdr - Processor x Crash Address ntoskrnl exe f c Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time Bug Check String PAGE FAULT IN NONPAGED AREA Bug Check Code x Parameter fffffa c feb Parameter Parameter fffff b e Parameter Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe f c File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win sp gdr - Processor x Crash Address ntoskrnl exe f c Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size thanks

A:BSOD without reason? ntoskrnl.exe 7f1c0

Hello Halloworld and welcome to Sevenforums.

To be able to help you, we'd need you to attach some files in order for us to analyse your crash. The below link will guide you through some steps for catching these files. If you have any questions just ask us.

http://www.sevenforums.com/crashes-d...tructions.html

Best Regards,
Frederik.

http://www.sevenforums.com/bsod-help-support/243648-bsod-without-reason-ntoskrnl-exe-7f1c0.html
Relevancy 73.96%

Hello,

I'm having blue screen errors on my Laptop which is only a couple weeks old and otherwise running fine. The BSODs aren't that many, maybe once a week while using the computer daily. Once it apparently was caused by me plugging in my USB mouse. Already did a memtest and chkdsk without result. Diagnostic tool files are attached. Any help is greatly appreciated!

A:BSOD in ntoskrnl.exe+7f1c0 on new Laptop Win 7 64 bit

Hello,

It looks like the first two BSODs were caused by old Razer mouse drivers. Install updated ones from here: Razer Support


Code:
copperhd.sys Tue Nov 10 02:50:17 2009 (4AF91B39)
The last one may have been caused by hardware. Try running the three Prime95 tests: Hardware - Stress Test With Prime95

...Summary of the dumps:

Code:

Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
Debug session time: Sun Aug 5 05:57:28.338 2012 (UTC - 4:00)
System Uptime: 0 days 0:01:04.368
*** WARNING: Unable to verify timestamp for copperhd.sys
*** ERROR: Module load completed but symbols could not be loaded for copperhd.sys
Probably caused by : copperhd.sys ( copperhd+16c9 )
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
BUGCHECK_STR: 0x50
PROCESS_NAME: razerhid.exe
FAILURE_BUCKET_ID: X64_0x50_copperhd+16c9
BiosReleaseDate = 04/20/2012
SystemProductName = Aspire V3-571G
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
Debug session time: Thu Jul 26 15:20:29.268 2012 (UTC - 4:00)
System Uptime: 0 days 0:01:24.298
*** WARNING: Unable to verify timestamp for copperhd.sys
*** ERROR: Module load completed but symbols could not be loaded for copperhd.sys
Probably caused by : copperhd.sys ( copperhd+16c9 )
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
BUGCHECK_STR: 0x50
PROCESS_NAME: razerhid.exe
FAILURE_BUCKET_ID: X64_0x50_copperhd+16c9
BiosReleaseDate = 04/20/2012
SystemProductName = Aspire V3-571G
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
Debug session time: Mon Jul 23 17:07:06.194 2012 (UTC - 4:00)
System Uptime: 0 days 11:18:47.226
*** ERROR: Module load completed but symbols could not be loaded for Ntfs.sys
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : ntkrnlmp.exe ( nt!FsRtlTeardownPerStreamContexts+e2 )
BUGCHECK_STR: 0xc2_7
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0xc2_7_nt!FsRtlTeardownPerStreamContexts+e2
BiosReleaseDate = 04/20/2012
SystemProductName = Aspire V3-571G
??????????????????????????????????????????????????????????????????????????????????????``

http://www.sevenforums.com/bsod-help-support/244838-bsod-ntoskrnl-exe-7f1c0-new-laptop-win-7-64-bit.html
Relevancy 73.96%

I have been getting a BSOD in my newly installed system

and ive included the files in this post as you asked for before posting

I am running Win 7 x64 OEM i bought it together with the parts for my system which you can see in my signature. it is only nearly 4 weeks old, i did put the system together myself for the first time .

hopefully i can get some help here

Btw the OS is installed on my Corsair SSD.

A:BSOD ntoskrnl.exe-7f1c0 while idling

And i runned a memtest today also and My ram Passed The test

http://www.sevenforums.com/bsod-help-support/228812-bsod-ntoskrnl-exe-7f1c0-while-idling.html
Relevancy 73.1%

I have had a new system built, Had it for almost 2 weeks and been getting the BSOD at least 2x a day. Ihave been browsing the web and had it happen, been playing online games and have it happen. Have even come home after work to find that the computer crashed and had to be restarted because of it. Dont know what to do. Can you help me?
Thank you in advance.

A:BSOD : Caused by address : ntoskrnl.exe+7f1c0

Hello,






Quote:
Start Menu\Programs\Advanced SystemCare with Antivirus 2013 Public:Start Menu\Programs\Advanced SystemCare with Antivirus 2013 Public


This program, Advanced SystemCare, is known to cause problems with windows. It modifies the registry, and could cause even more errors. Please uninstall. Since this comes with an anti-virus, i suggest using Microsoft Security Essentials - Free Antivirus for Windows in place.


Code:
Start Menu\Programs\DAEMON Tools Lite Public:Start Menu\Programs\DAEMON Tools Lite Public
Daemon Tools are also know to cause problems with windows. Please uninstall also.






Quote:
Probably caused by : memory_corruption


This shows memory corruption, so try running a RAM - Test with Memtest86+ to make sure the RAM isn't bad.


Code:
ctac32k.sys Wed Jul 2 03:38:22 2008 (486B3E7E)
Drivers before 2009 are known to cause problems aswell. Please update: Creative Worldwide Support

After all is done please post back results.

-Justin

http://www.sevenforums.com/bsod-help-support/243938-bsod-caused-address-ntoskrnl-exe-7f1c0.html
Relevancy 73.1%

Hello i recently got a new HP Pavillion dv - c us about a week ago Code caused by ntoskrnl.exe+7f1c0? laptop, BSOD new Intel Core i - M GB DDR RAM x GB x GB GB RPM Hard Drive - x -bit new laptop, BSOD caused by ntoskrnl.exe+7f1c0? or x - Windows Home Premium bit - the original installed OS on the system - Yes - an OEM or full retail version - OEM - What is the age of system hardware NEW - What is the age of OS installation have you re-installed the OS NEW Today i received a BSOD while new laptop, BSOD caused by ntoskrnl.exe+7f1c0? listening to turntable fm For those who dont know what turntable fm is its like pandora but theres DJ's that take turns new laptop, BSOD caused by ntoskrnl.exe+7f1c0? playing music i have no idea how that can give me a BSOD Having only gotten this laptop a week ago i was terrifed So i restarted my computer and restored to a previous point and everything seemed normal until i noticed my physical memory was at when i had nothing open usually it is at Windows and BIOS is reading the laptop only having GBs of RAM when it has really GBs So i reinsert the GB ram stick and everything is back to normal Hours later i was listening to turntable fm again and i was able to recreate the same BSOD im guessing the gb ram stick is going bad idk Heres a BSODScreen viewer dump Code Dump File - - dmp Crash Time AM Bug Check String KMODE EXCEPTION NOT HANDLED Bug Check Code x e Parameter ffffffff c Parameter Parameter Parameter Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe f c File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win sp gdr - Processor x Crash Address ntoskrnl exe f c Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size edit i also ran a memtest and both rams seems to pass should i do - passes i decided to experment and found that if i switch around the ramsticks in the slots i found when i put the gb ramstick into the gb original ramslot the computer would now sometimes read gbs of ram instead of sometimes reading gb of ram from earlier so im guessing the ramslot where the gb ramstick originally sat is faulty or i could be wrong idk

A:new laptop, BSOD caused by ntoskrnl.exe+7f1c0?

Please follow the http://www.sevenforums.com/crashes-d...tructions.html so we can help you.

Stephen

http://www.sevenforums.com/bsod-help-support/234089-new-laptop-bsod-caused-ntoskrnl-exe-7f1c0.html
Relevancy 73.1%

I built a new PC back in June and have been receiving numerous BSOD's and have just been working through it until now, can you help me with it? I have attached the dump files as outlined in the SF Diagnostic Tool. I have the following:

asrock z77 extreme6 board
Curcial M4 SSD
Kingston 8GB 1600 CL9 (not the issue as I get the same BSOD when using GSkill RipJaws
Intel I5-3570K

I have checked through the mini dumps numerous times but cannot figure it out. Any help would be great.

A:BSOD ntoskrnl.exe+7f1c0 Vista Driver

I didn't mean to put sfc /scannow in subject line. Let me know if I didn't post correctly and I can repost... please help someone

http://www.sevenforums.com/bsod-help-support/250445-bsod-ntoskrnl-exe-7f1c0-vista-driver.html
Relevancy 73.1%

Hi,

3 days ago I started randomly getting blue screens with DRIVER_POWER_STATE_FAILURE ntoskrnl.exe+7f1c0.

The first time it happened I was playing diablo3, the second time browsing a website, and the third time today I went away from my computer for a few hrs and came back to a blue screen.

I would like to add the only thing that's changed hardware wise is I am using a new keyboard the logitec g110 with a g9x mouse plugged into it. (I'm not sure if this would cause a blue screen error but figured I would mention it in case).

Any help would greatly be appreciated, Thanks!

A:BSOD DRIVER_POWER_STATE_FAILURE casued by ntoskrnl.exe+7f1c0

Caused by "ASUS Charger Driver", it's probably best to uninstall it, I've had some bad experiences with similar software.

fffff880`00dec000 fffff880`00dede80 AiCharger Wed May 05 10:37:36 2010 (4BE12E50)

http://www.sevenforums.com/bsod-help-support/246583-bsod-driver_power_state_failure-casued-ntoskrnl-exe-7f1c0.html
Relevancy 73.1%

Hello recently I have just built my new computer and everything seemed to playing BSOD computer, while ntoskrnl.exe+7f1c0 using be going fine However I had gotten a BSOD when trying to copy a large amount of file from my external Although I BSOD while playing using computer, ntoskrnl.exe+7f1c0 didn't get the dump file of it as that wasn't BSOD while playing using computer, ntoskrnl.exe+7f1c0 in the settings at the time I assumed it was due to copying from the external and just copied smaller files and it hasn't happened again However I was just playing League of Legends and my computer decided to randomly BSOD So I downloaded SF Diagnostic Tool and zipped the folder so I was wondering as what the problem is BlueScreenView says the crash address is ntoskrnl exe f c and I wasn't sure if this was a hardware or BSOD while playing using computer, ntoskrnl.exe+7f1c0 software problem as I have only received the parts less than a week ago My specs are Gigabyte Z -D H motherboard Intel Core i - processor gig of Corsair Vengeance RAM GeForce GTX graphics card Any help would be greatly appreciated

A:BSOD while playing using computer, ntoskrnl.exe+7f1c0

Welcome aboard, Balvedius

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 50, {fffff6a000022640, 0, fffff80002eb4b2b, 5}
Could not read faulting driver name
Probably caused by : memory_corruption ( nt!MiAgeWorkingSet+1d1 )
At first, you are to run RAM - Test with Memtest86+ . run it for 8 passes.

As the crash is hardware related, you are suggested to take two more testsHardware - Stress Test With Prime95, and
run chkdsk/F/R, using the method two of the tutorial Disk Check.

Let us know the results.

http://www.sevenforums.com/bsod-help-support/250256-bsod-while-playing-using-computer-ntoskrnl-exe-7f1c0.html
Relevancy 73.1%

Hi All

I built a custom machine a month ago and been receiving very strange BSODs all with the same message for the last month.

All drivers are upto date including the SSD as primary and the BIOS

What happens is intermittent and my machine freezes for a few seconds then eventually starts BSOD and memory dumping.

I have done a full memtest, hdd check, gfx card stress test etc. All is good.

Theres even times I can be going for 12 hours straight without issues so Im not able to reproduce it unfortunately.

Attached are the diag tools outputs

Any help of course is greatly appreciated

Thx

Maroof

A:BSOD ntoskrnl.exe+7f1c0 CRITICAL_OBJECT_TERMINATION randomly

Hardware
I see you have an SSD installed. SSD drivers are a common cause of BSOD's, in particular Crucial M4's with outdated firmware. Make sure that the following is up to date:








  
Quote: Originally Posted by writhziden


SSD Firmware
BIOS Version
Chipset Drivers
Hard disk controller drivers/SATA drivers
Marvell IDE ATA/ATAPI controllers (older drivers for these are especially problematic)



Software
Run a full system scan with Malwarebytes.
Malwarebytes : Free anti-malware download

http://www.sevenforums.com/bsod-help-support/244611-bsod-ntoskrnl-exe-7f1c0-critical_object_termination-randomly.html
Relevancy 73.1%

Computer keeps BSOD after trying to wake it from sleep mode, or even if the monitor just powers off via power save options. Installed latest video drivers and windows updates to no avail. Thanks in advance for the help!

A:BSOD after sleep mode ntoskrnl.exe+7f1c0

hi
The last dump refers to msahci.sys... which is related to you Hard Dirve..

Check you bios to see if it is set to AHCI ...

http://www.sevenforums.com/bsod-help-support/244004-bsod-after-sleep-mode-ntoskrnl-exe-7f1c0.html
Relevancy 73.1%

I'm decent with computers, but I've definitely managed to end up a bit over my head with this one. I've got 4 different BSODs due to this one file now, all at seemingly random times. One while running Guild Wars 2, several while trying to run HULU via Chrome, and one while moving Chrome from one screen to the other. I even managed to get one in Safe Mode and one while trying to load into Safe Mode. Even got one while checking the C Drive for errors. I have never in my life seen a BSOD outside of Windows, so I know something is definitely wrong. I figured I'd come in here and ask what you guys think instead of tinkering around with stuff and possibly making it worse.

A:BSOD Caused By Driver ntoskrnl.exe (+7f1c0)

Welcome

What antivirus are you using? I cannot see any listed.

Problematic software:

Code:
Start Menu\Programs\DAEMON Tools Lite Public:Start Menu\Programs\DAEMON Tools Lite Public
Please uninstall Daemon Tools, it's known to cause BSODs. Search our forum for evidence.


Code:
STOP 0x0000003B: SYSTEM_SERVICE_EXCEPTION
Usual causes: System service, Device driver, graphics driver, ?memory
BugCheck 3B, {c000001d, fffffa8010e0d060, fffff880045c2ad0, 0}
Probably caused by : ntkrnlmp.exe ( nt!KiSystemServiceHandler+7c )
.................................
fffff880`045c25a0 fffff880`0f507ad1Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
nvlddmkm+0xd9ad1
.................................
2: kd> lmvm nvlddmkm
start end module name
fffff880`0f42e000 fffff880`101f0000 nvlddmkm T (no symbols)
Loaded symbol image file: nvlddmkm.sys
Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
Image name: nvlddmkm.sys
Timestamp: Tue May 15 13:35:36 2012 (4FB20748)
CheckSum: 00DA5E91
ImageSize: 00DC2000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Please update your graphic card drivers to their latest.
Click on the Start ► Control Panel ► Programs ► Uninstall a program ► Uninstall the NVIDIA related stuff and use Driver Sweeper to remove any remaining drivers of NVIDIA. Get the latest version installed from the manufacturers website.

4 of your dumps indicate problems with memory.

Code:
STOP 0x00000109: CRITICAL_STRUCTURE_CORRUPTION
Usual causes: Device driver, Breakpoint set with no debugger attached, Hardware (Memory in particular)
BugCheck 109, {a3a039d89e8db8ba, b3b7465ef10a8810, fffff80003930d10, 1}
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : memory_corruption
Take memtest. Run for 8 passes and test each stick in a know good slot for an additional 6 passes.
RAM - Test with Memtest86+
Guide to using Memtest86+ - Geeks to Go Forums

Follow this strategy:





Quote:
The goal is to test all the RAM sticks and all the motherboard slots.

Check your motherboard manual to ensure the RAM sticks are in the recommended motherboard slots. Some motherboards have very specific slots required for the number of RAM sticks installed.

If you get errors, stop the test and continue with the next step.

1. Remove all but one stick of RAM from your computer (this will be RAM stick #1), and run Memtest86 again, for 7 passes.
Be sure to note the RAM stick, use a piece of tape with a number, and note the motherboard slot.
If this stick passes the test then go to step #3.

2. If RAM stick #1 has errors, repeat the test with RAM stick #2 in the same motherboard slot.
If RAM stick #2 passes, this indicates that RAM stick #1 may be bad. If you want to be absolutely sure, re-test RAM stick #1 in another known good slot.
If RAM stick #2 has errors, this indicates another possible bad RAM stick, a possible motherboard slot failure or inadequate settings.
3. Test the next stick of RAM (stick #2) in the next motherboard slot.
If this RAM stick has errors repeat step #2 using a known good stick if possible, or another stick.
If this RAM stick has no errors and both sticks failed in slot#1, test RAM stick #1 in this slot.
4. If you find a stick that passes the test, test it in all the other motherboard slots.

If Part 2 testing shows errors, and all tests in Part 3 show errors, you will need to test the RAM sticks in another computer and/or test other RAM in your computer to identify the problem.

In this way, you can identify whether it is a bad stick of RAM, a bad m... Read more

http://www.sevenforums.com/bsod-help-support/259506-bsod-caused-driver-ntoskrnl-exe-7f1c0.html
Relevancy 72.24%

Hi,
I built the Ivy Bridge machine described in my system specs a couple of weeks ago, and all went well except that I am getting BSOD?s every few days 5 in all.
Bluescreen view shows them as MEMORY_MANAGEMENT from ntoskrnl.exe+7f1c0 or Ntfs.sys+a4990 though there is one IRQL_NOT_LESS_OR_EQUAL also from ntoskrnl.exe+7f1c0.
No obvious causes that I can see though they often happen in Firefox.
I have:-
Run memtest - all shows as good.
Run sfc /verifyonly no problems
Run Crystal Disk Info which shows Good on all 3 drives
Run the Check Drive for errors (from the drive properties)
So I am throwing myself on your mercy, and hoping you can point me at any further tests I should try.
I attach the zip as described in your howto (I hope).
Thanks in advance for whatever help you can provide.

A:BSOD on New Win7 x64 - ntoskrnl.exe+7f1c0 - random ~ every few days.

These crashes were caused by memory management probably a driver.
Please run these two tests to verify your memory and find which driver is causing the problem.

* If you are overclocking anything reset to default before running these tests.
In other words STOP!!!

* If you have a Raid update its Driver.

Memtest. If you havent run memtest for 6-8 passes please run it again, if you have start with driver verifier





Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5-7 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.



RAM - Test with Memtest86+


Driver Verifier






Quote:
Using Driver Verifier is an iffy proposition.
Most times it'll crash and it'll tell you what the driver is.
But sometimes it'll crash and won't tell you the driver.
Other times it'll crash before you can log in to Windows.
If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise.
Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation"IRP Logging and Force Pending I/O Requests. and click "Next"
NOTE: You can use Low Resource Simulation if you'd like.
From my limited experimentation it makes the BSOD's come faster.
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

If you are using win 8 add these
- Concurrency Stress Test
- DDI compliance checking
Reboot the system and wait for it to crash to the Blue Screen.
Continue to use your system normally, and if you know what causes the crash, do that repeatedly.
The objective here is to get the system to crash because Driver Verifier is stressing the drivers out.
If it doesn't crash for you, then let it run for at least 36 hours of continuous operation.
Reboot into Windows (after the crash) and turn off Driver Verifier by going back in and selecting "Delete existing settings" on the first page, then locate and zip up the memory dump file and upload it with your next post.
If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.

Thanks to JCGriff2 & Usasma.

Sysnative Forums

Driver Reference Table (DRT)




Using Driver Verifier to identify issues with Windows drivers for advanced users

Driver Verifier

Using Driver Verifier (Windows Drivers)

http://www.sevenforums.com/bsod-help-support/232306-bsod-new-win7-x64-ntoskrnl-exe-7f1c0-random-every-few-days.html
Relevancy 72.24%

Keep getting these BSOD when playing COD MW3. Have run memtest86+4.2 and tests passed. Here is my SF Diagnostics report. Would appreciate your help solving this problem

A:BSOD playing COD MW3 error caused by ntoskrnl.exe+7f1c0

Welcome

Most of your dumps show memory as the issue.

Lets start with problematic software:

Code:
Start Menu\Programs\DAEMON Tools Pro Public:Start Menu\Programs\DAEMON Tools Pro Public
Start Menu\Programs\BitDefender 2011 Public:Start Menu\Programs\BitDefender 2011 Public
Start Menu\Programs\Autodesk Public:Start Menu\Programs\Autodesk Public
Daemon tools is a known cause of blue screens. If you search this forum, you will find a lot of threads about it.
Please uninstall BitDefender and Autodesk while we are troubleshooting with your computer.

MSE is recommended by almost all members on our forum and known to be the most compatible antivirus with windows 7.
Microsoft Security Essentials - Free Antivirus for Windows

Run the system file checker 3 times as mentioned in the tutorial below:
SFC /SCANNOW Command - System File Checker

To make sure that hard drive is good run disk check following this tutorial:
Disk Check

Hard drive scan usings SeaTools:
SeaTools | Seagate both long and short tests.

You need to run memtest for 8 passes on each stick preferably overnight.
Guide to using Memtest86+ - Geeks to Go Forums

Let us know your results

http://www.sevenforums.com/bsod-help-support/253293-bsod-playing-cod-mw3-error-caused-ntoskrnl-exe-7f1c0.html
Relevancy 72.24%

Hi there I recently updated my NVIDIA Drivers for my GTX from to and immediately received a BSOD when trying to start up Skyrim Since I did a clean install I had no drivers to rollback to so I decided to install the drivers which worked fairly well for about an hour I am now receiving BSODs every - hours from anything such as writing in a word document browsing facebook playing a game or looking at a vimeo video I am running dual monitors one hz and the primary hz with Displayfusion currently have disabled aero and the extended toolbar This was working fine before I updated my drivers I have ran a memtest NVIDIA after update Driver BSOD ntoskrnl.exe+7f1c0 with all positive results and I am running Driver Verifier with all non Microsoft drivers checked The latest crash was with Verifier running and while attempting to load a vimeo page The obvious answer would be to rollback to the NVIDIA drivers however I have a feeling there might be something else amiss I BSOD ntoskrnl.exe+7f1c0 after NVIDIA Driver update thought I might come here first before any more potential frustration and to stamp out any further issues I have attached the auto-compiled folder and a spec list Please let me know if there is any more information you would like me to provide Any help is appreciated

A:BSOD ntoskrnl.exe+7f1c0 after NVIDIA Driver update

Welcome aboard.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 124, {0, fffffa8005d30028, be200000, 5110a}

*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : hardware

Followup: MachineOwner
---------
Follow the guide Stop 0x124 - what it means and what to try, step by step!

http://www.sevenforums.com/bsod-help-support/257209-bsod-ntoskrnl-exe-7f1c0-after-nvidia-driver-update.html
Relevancy 72.24%

Hi,

I'm haveing some problems with my HTPC, when its going to sleep mode it usually gets a bsod, either right away or during the night.

I have all windows updates applied, i have updated the drivers, updated my ocz agility with newest firmware, tried other ram's also.

I have also tried reinstalling windows without success.

Would realy appriciate if anyone could give me some hints on whats causing this.

A:BSOD when the HTPC is in sleep mode ntoskrnl.exe+7f1c0

Hello Ray and welcome to Sevenforums.

SFC /scannow
We usually ask people to do this command to check if Windows is corrupted. It's the most common used one to check if the Windows files are corrupted. If it'll find errors, it'll restore them.



   Tip
If you're having a custom customization layer on your Aero, it's likely to get restored to default.
Press Start | search 'cmd' | Right-click it
| open as Admin | type SFC /SCANNOW

SFC /SCANNOW Command - System File Checker

Best Regards,
Frederik.

http://www.sevenforums.com/bsod-help-support/248880-bsod-when-htpc-sleep-mode-ntoskrnl-exe-7f1c0.html
Relevancy 72.24%

Hi everyone i have been having this issue intermittently I do some heavy gaming with no problems at all Batllefield on Ultra for - hours straight Most times this BSOD happens when i have left a torrent to download or i am simply opening a folder in explorer or browsing a web page I have researched this error many many times and have done several things to see if i can fix it myself they are as follows Checked RAM memtest and swapped sticks etc Upgraded firmware for SSD as i heard Vertex was known for BSODs Used the OS just on my Seagate HDD with the SSD uninstalled removed Replaced RAM with Corsair Vengeance GB had BSOD within - hours Made sure i am only using the two main intel GB SATA ports for SSD and HDD set to AHCI Am only running MSE as an antivirus I am BSOD ntoskrnl.exe+7f1c0, Bug Check - 0x000000f4 Random eager for help and will take any advice i can from the wealth of knowledge on these boards Kindly see attached my uploaded documents BSOD Random - ntoskrnl.exe+7f1c0, Bug Check 0x000000f4 and please don't hesitate to ask for more if they are needed Kindest regards Daco

A:BSOD Random - ntoskrnl.exe+7f1c0, Bug Check 0x000000f4

Bluetooth is disabled. Is this deliberate? If so, why? Please re-enable the Bluetooth and update it. Once updated, feel free to disable it again.

Dirty bit is set on the G: drive. There are only 2 ways to fix this:
- run CHKDSK /R /F from and elevated (Run as adminstrator) Command Prompt
- fully format the drive
You can physically remove/disconnect the drive also
I'd suggest running hard drive diagnostics on ALL drives: Hard Drive Diagnostic Procedure

Triple check to make sure you're not using the Marvell controller.
Ensure that the Marvell Controller drivers are the latest available from the manufacturer.

Western Digital software dates from 2008. Please uninstall it.

100 mHz overclock in one of the memory dumps. Is this deliberate, or is there an auto-overclocking app present on the system (sorta like Turbo mode). If there is, please disable it - they've been known to cause BSOD's

Memory dumps seem to point towards a hard drive problem. I'd strongly suggest that you check all hard drives attached to the system - both internal and external (USB) - using this link: Hard Drive Diagnostic Procedure

The following info is just FYI, I've already addressed the issues that I saw in the above paragraphs

- Further info on BSOD error messages available at: http://www.carrona.org/bsodindx.html
- Info on how to troubleshoot BSOD's (DRAFT): http://www.carrona.org/userbsod.html
- How I do it: http://www.carrona.org/howidoit.html

3RD PARTY DRIVERS PRESENT IN THE DUMP FILES
Code:

jraid.sys Tue Aug 10 05:28:44 2010 (4C611BCC)
mv91xx.sys Fri Aug 27 05:49:22 2010 (4C778A22)
mvxxmm.sys Fri Aug 27 05:49:03 2010 (4C778A0F)
amdxata.sys Fri Mar 19 12:18:18 2010 (4BA3A3CA)
MpFilter.sys Fri Mar 09 06:05:26 2012 (4F59E3F6)
asmtxhci.sys Wed Feb 23 21:25:47 2011 (4D65C1AB)
HECIx64.sys Tue Oct 19 19:33:43 2010 (4CBE2AD7)
e1c62x64.sys Tue Sep 21 17:34:15 2010 (4C9924D7)
btath_bus.sys Thu Jun 24 02:17:43 2010 (4C22F887)
RTKVHD64.sys Tue Nov 23 05:14:08 2010 (4CEB93F0)
asmthub3.sys Wed Feb 23 21:25:56 2011 (4D65C1B4)
wdcsam64.sys Wed Apr 16 04:39:08 2008 (4805BB2C)
cpuz135_x64.sys Wed Sep 21 04:23:41 2011 (4E799F0D)
nvlddmkm.sys Tue May 15 03:35:36 2012 (4FB20748)
btath_rcp.sys Thu Jun 24 02:17:21 2010 (4C22F871)
btfilter.sys Tue Mar 08 01:15:22 2011 (4D75C97A)
btath_a2dp.sys Mon Feb 14 20:47:47 2011 (4D59DB43)
btath_hcrp.sys Tue Jun 29 05:30:43 2010 (4C29BD43)
btath_flt.sys Thu Jun 24 02:17:38 2010 (4C22F882)
btath_lwflt.sys Mon Sep 13 04:26:54 2010 (4C8DE04E)

http://www.carrona.org/drivers/driver.php?id=jraid.sys
http://www.carrona.org/drivers/driver.php?id=mv91xx.sys
http://www.carrona.org/drivers/driver.php?id=mvxxmm.sys
http://www.carrona.org/drivers/driver.php?id=amdxata.sys
http://www.carrona.org/drivers/driver.php?id=MpFilter.sys
http://www.carrona.org/drivers/driver.php?id=asmtxhci.sys
http://www.carrona.org/drivers/driver.php?id=HECIx64.sys
http://www.carrona.org/drivers/driver.php?id=e1c62x64.sys
http://www.carrona.org/drivers/driver.php?id=btath_bus.sys
http://www.carrona.org/drivers/driver.php?id=RTKVHD64.sys
http://www.carrona.org/drivers/driver.php?id=asmthub3.sys
http://www.carrona.org/drivers/driver.php?id=wdcsam64.sys
http://www.carrona.org/drivers/driver.php?id=cpuz135_x64.sys
http://www.carrona.org/drivers/driver.php?id=nvlddmkm.sys
http://www.carrona.org/drivers/driver.php?id=btath_rcp.sys
http://www.carrona.org/drivers/driver.php?id=btfilter.sys
http://www.carrona.org/drivers/driver.php?id=btath_a2dp.sys
http://www.carrona.org/drivers/driver.php?id=btath_hcrp.sys
http://www.carrona.org/drivers/driver.php?id=btath_flt.sys
http://www.carrona.org/drivers/driver.php?id=btath_lwflt.sys

BSOD BUGCHECK SUMMARY

Code:

Loading Dump File [C:\Users\FUBAR\_jcgriff2_\dbug\__Kernel__\061312-6130-01.dmp]
Built by: 7601.17803.amd64fre.win7sp1_gdr.120330-1504
Debug session time: Wed Jun 13 02:00:08.741 2... Read more

http://www.sevenforums.com/bsod-help-support/234769-bsod-random-ntoskrnl-exe-7f1c0-bug-check-0x000000f4.html
Relevancy 72.24%

Is Windows 7 . . . x64 bit - the original installed OS on the system? windows 7 - an OEM or full retail version? OEM - What is the age of system (hardware)? 6 months - What is the age of OS installation 6 months

For a long time now i have been experiencing stop errors related to ntoskrnl.exe
they are not frequent and occur once every few days.

I would greatly appreciate any help regarding this issue and will be happy to provide any additional information
thanks,
tom

A:Random BSOD error 0x0000004e ntoskrnl.exe+7f1c0

Device Concerns:
Code:
NVIDIA High Definition Audio HDAUDIO\FUNC_01&VEN_10DE&DEV_0016&SUBSYS_10DE0101&REV_1001\5&37CB11FF&0&0001 This device is disabled.
NVIDIA High Definition Audio HDAUDIO\FUNC_01&VEN_10DE&DEV_0016&SUBSYS_10DE0101&REV_1001\5&37CB11FF&0&0101 This device is disabled.
VirtualBox Host-Only Ethernet Adapter ROOT\NET\0000 This device is disabled.
ASUS Bluetooth USB\VID_0B05&PID_179C\6&DF2EE03&0&7 This device is disabled.
NVIDIA High Definition Audio HDAUDIO\FUNC_01&VEN_10DE&DEV_0016&SUBSYS_10DE0101&REV_1001\5&37CB11FF&0&0201 This device is disabled.
NVIDIA High Definition Audio HDAUDIO\FUNC_01&VEN_10DE&DEV_0016&SUBSYS_10DE0101&REV_1001\5&37CB11FF&0&0301 This device is disabled.
Realtek 8185 Extensible 802.11b/g Wireless Device PCI\VEN_10EC&DEV_8185&SUBSYS_822510EC&REV_20\5&D93DF5B&0&0800E6 This device is disabled.
Were you aware of the above? If so, please explain your reasoning so we may understand your troubleshooting steps.
Software Concerns:You need to update to Kaspersky Internet Security 2012. 2011 may cause instability due to the age of the software.
You have a number of programs running. I would recommend that you Troubleshoot Application Conflicts by Performing a Clean Startup leaving only your security software enabled with startup and have services run on startup.

Code:
Start Menu\Programs\ASUS\AI Suite II Public:Start Menu\Programs\ASUS\AI Suite II Public
Start Menu\Programs\ASUS\Disk Unlocker Public:Start Menu\Programs\ASUS\Disk Unlocker Public
Start Menu\Programs\Driver Detective Public:Start Menu\Programs\Driver Detective Public
Recommend removing your ASUS utilities through Start Menu -> Control Panel -> Uninstall a program. They can provide software interfaces with the hardware for overclocking, and even when the overclock is not enabled, that interface can cause instability. They are also not needed for the system to function properly and may reduce system resources.

We do not recommend automated driver update software. It often finds drivers for devices similar to but not exactly the same as the hardware actually on the system. This can lead to conflicts and blue screen crashes. If you need help finding driver updates for a certain device, please start a thread in Drivers - Windows 7 Forums instead of using software. Driver updates are not always necessary and some updates can actually decrease system stability rather than increase it, so it is usually better not to update unless a device or its driver is causing problems with the system. If it ain't broke, don't fix it.

Analysis:It is difficult to find patterns with only one .dmp file. Yours points to memory problems or driver conflicts.If you are overclocking any hardware, please stop.

Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).


   Warning
Before you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. WARNING: The steps that follow can void your warranty!!!

For Part 3: If You Have Errors: If you swap any memory components, follow these steps for ESD safety:Shut down and turn off your computer.
Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
Hold down the power button for 30 seconds to close the circuit and ensure a... Read more

http://www.sevenforums.com/bsod-help-support/237699-random-bsod-error-0x0000004e-ntoskrnl-exe-7f1c0.html
Relevancy 70.52%

Hi,
I've a problem with an HP all in one pc. The pc is a Hp TouchSmart 7320 EnergStar. The problem is a BSOD error after about half hour the pc is on. I see the minidump and the process that cause the error is ntoskrnl.exe with 0x00000109 error. The hardware configuration of the pc is this :

4 GB di SDRAM DDR3 a 1333 MHz
Realtek RTL8171EH GbE integrata; Minicard HP Wireless NIC 802.11b/g/n
Intel? Core? i3 2120 (3,30 GHz, 3 MB di cache, 2 core)Chipset Intel? H61
Windows? 7 Professional autentico 64
Video card integrated on h61 chipset

I attach the file generated by SF Diagnostic Tool.

I updated the hardware driver with the last that i found on the hp site. I tested to stop the ESET NOD32 verson 5. This test has not had good result. The bsod is always present.

A:BSOD of ntoskrnl.exe process with 0x00000109 error

Such PCs are hard to debug.

Can you upload your MSINFO32.nfo file?
Click on the start button
Type "msinfo32" (without quotes) in the search bar of the start menu, click the resulting link. It will open the System Information window.
File>Save. In the "File Name" filed, put "MSINFO32" (without Quote), give the save location to desktop, and click the "save" button.
Give the time for processing, it will save a .nfo file on your desktop.
Zip it, and upload it following the instruction.

http://www.sevenforums.com/bsod-help-support/312796-bsod-ntoskrnl-exe-process-0x00000109-error.html
Relevancy 70.09%

Windows 7 Pro x64
original installed OS
OEM

hardware is 2.5 years old
original installation of OS


Thanks for your help!!!

A:BSOD error ntoskrnl.exe+7f1c0 - lots of Chrome browser tabs open

Running the last 3 memory dumps (May and June 2012)

Do you have any idea of what this is (it's from your startups):





Quote:
MEI_Startup c:\script_temp\startup.cmd Public HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Run


If not, please run several of these free anti-malware scans to see if you're infected (and if your current protection is compromised): Free Online AntiMalware Resources

Your network drivers date from 2009 - please update them.

If the above doesn't solve your BSOD problems, please post back so we can suggest some further diagnostics.

Good luck!

The following info is just FYI, I've already addressed the issues that I saw in the above paragraphs

- Further info on BSOD error messages available at: http://www.carrona.org/bsodindx.html
- Info on how to troubleshoot BSOD's (DRAFT): http://www.carrona.org/userbsod.html
- How I do it: http://www.carrona.org/howidoit.html

3RD PARTY DRIVERS PRESENT IN THE DUMP FILES

Code:

L8042Kbd.sys Tue Aug 24 13:23:11 2010 (4C73FFFF)
MpFilter.sys Fri Mar 09 06:05:26 2012 (4F59E3F6)
SCDEmu.SYS Mon Apr 12 04:52:25 2010 (4BC2DF49)
amdxata.sys Fri Mar 19 12:18:18 2010 (4BA3A3CA)
dump_iaStorV.sys Thu Jun 10 20:46:19 2010 (4C11875B)
e1y62x64.sys Fri Jun 12 21:16:42 2009 (4A32FDFA)
iaStorV.sys Thu Jun 10 20:46:19 2010 (4C11875B)
igdkmd64.sys Fri Feb 11 14:16:32 2011 (4D558B10)
psi_mf.sys Wed Sep 01 03:53:14 2010 (4C7E066A)
sbmount.SYS Fri Jun 24 17:48:19 2011 (4E050623)
stcvsm.sys Fri Jun 24 17:45:59 2011 (4E050597)
vpchbus.sys Sat Nov 20 06:35:38 2010 (4CE7B28A)
vpcnfltr.sys Sat Nov 20 06:35:20 2010 (4CE7B278)
vpcusb.sys Sat Nov 20 06:35:31 2010 (4CE7B283)
vpcvmm.sys Sat Nov 20 06:35:48 2010 (4CE7B294)

http://www.carrona.org/drivers/driver.php?id=L8042Kbd.sys
http://www.carrona.org/drivers/driver.php?id=MpFilter.sys
http://www.carrona.org/drivers/driver.php?id=SCDEmu.SYS
http://www.carrona.org/drivers/driver.php?id=amdxata.sys
http://www.carrona.org/drivers/driver.php?id=dump_iaStorV.sys
http://www.carrona.org/drivers/driver.php?id=e1y62x64.sys
http://www.carrona.org/drivers/driver.php?id=iaStorV.sys
http://www.carrona.org/drivers/driver.php?id=igdkmd64.sys
http://www.carrona.org/drivers/driver.php?id=psi_mf.sys
http://www.carrona.org/drivers/driver.php?id=sbmount.SYS
http://www.carrona.org/drivers/driver.php?id=stcvsm.sys
http://www.carrona.org/drivers/driver.php?id=vpchbus.sys
http://www.carrona.org/drivers/driver.php?id=vpcnfltr.sys
http://www.carrona.org/drivers/driver.php?id=vpcusb.sys
http://www.carrona.org/drivers/driver.php?id=vpcvmm.sys

BSOD BUGCHECK SUMMARY


Code:

Loading Dump File [C:\Users\John\_jcgriff2_\dbug\__Kernel__\052512-35178-01.dmp]
Built by: 7601.17803.amd64fre.win7sp1_gdr.120330-1504
Debug session time: Fri May 25 13:11:36.081 2012 (UTC - 4:00)
System Uptime: 4 days 1:38:25.829
BugCheck 1A, {41790, fffffa80061fb840, ffff, 0}
Probably caused by : win32k.sys ( win32k!NtGdiCreateDIBSection+3e4 )
BUGCHECK_STR: 0x1a_41790
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
PROCESS_NAME: chrome.exe
FAILURE_BUCKET_ID: X64_0x1a_41790_win32k!NtGdiCreateDIBSection+3e4
Bugcheck code 0000001A
Arguments 00000000`00041790 fffffa80`061fb840 00000000`0000ffff 00000000`00000000
BiosVersion = 080015
BiosReleaseDate = 10/16/2009
SystemManufacturer = powerspec
SystemProductName = B667
MaxSpeed: 2660
CurrentSpeed: 2666
??????????????????????????????????????????????????????????????????????????????????????``
Loading Dump File [C:\Users\John\_jcgriff2_\dbug\__Kernel__\053112-30435-01.dmp]
Built by: 7601.17803.amd64fre.win7sp1_gdr.120330-1504
Debug session time: Thu May 31 19:55:52.468 2012 (UTC - 4:00)
System Uptime: 6 days 6:41:14.201
BugCheck 109, {a3a039d89f132868, 0, a9c65ba56d70b6e9, 101}
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : Un... Read more

http://www.sevenforums.com/bsod-help-support/235657-bsod-error-ntoskrnl-exe-7f1c0-lots-chrome-browser-tabs-open.html
Relevancy 69.66%

Hello,
For the last several days, I have repeatedly gotten multiple BSOD errors with ntoskrnl.exe and STOP: 0x00000109. It's been like that ever since my computer got infected with some viruses from a malicious website/download--Delta Search virus, I believe (which I was able to eliminate all of them through my Microsoft Security Essentials). Everything is ok for my computer now except now that I get multiple BSOD errors that my laptop has to automatically restart over and over again and it is getting crazy for me.

My PC is a HP Pavilion dv6-3013cl and it's over 2 years old already

Here's my ZIP file attached.

Any help is appreciated. Thanks!

A:Repeated BSOD errors with ntoskrnl.exe and STOP: 0x00000109

Welcome .

Please run these tests (in order): Testing the RAM - RAM - Test with Memtest86+
*Do note, take special care of part 3.
Testing the HDD - Hard Drive Diagnostic Procedure | Software Utilities
*You are looking for TOSHIBA.
__________________________________________________
Remove: CPU-Z - cpuz132_x64 = Driver Reference Table - cpuz132_x64.sys Sat Mar 07 12:03:14 2009Update:AtiPcie - Mon Aug 24 11:25:26 2009 - Driver Reference Table - AtiPcie.sys
dvmio - Wed Nov 11 06:38:32 2009 - Driver Reference Table - dvmio.sys
usbfilter - Tue Dec 22 10:26:22 2009 - Driver Reference Table - usbfilter.sys
AtiHdmi - Fri Jan 29 03:03:36 2010 - Driver Reference Table - AtiHdmi.sys
amdxata - Fri Mar 19 18:18:18 2010 - Driver Reference Table - amdxata.sys
stwrt64 - Thu Jul 22 10:25:34 2010 - Driver Reference Table - stwrt64.sys
atikmpag - Mon Sep 20 03:21:01 2010 - Driver Reference Table - atikmpag.sys
atikmdag - Mon Sep 20 03:47:42 2010 - Driver Reference Table - atikmdag.sys
hpdskflt - Fri May 13 21:47:02 2011 - Driver Reference Table - hpdskflt.sys
Accelerometer - Fri May 13 21:47:02 2011 - Driver Reference Table - Accelerometer.sys
Rt64win7 - Fri Jun 10 09:33:15 2011 - Driver Reference Table - Rt64win7.sys
athrx - Thu Jun 14 11:23:09 2012 - Driver Reference Table - athrx.sys

speedfan - Sat Dec 29 22:59:35 2012 (I recommend removing it all together).

I was unable to locate a source for this:mpzrvnsz \??\c:\windows\system32\drivers\mpzrvnsz.sys Kernel Driver

http://www.sevenforums.com/bsod-help-support/299387-repeated-bsod-errors-ntoskrnl-exe-stop-0x00000109.html
Relevancy 69.66%

Hi Guys,

I have a new pc here that has been built in the last 2 days. And when the machine has been idle it has blue screened twice with NTOSKRNL.exe errors (see attached) one with a 0x0000000a and another with a 0x00000109 error

Machine stats are

Asus P8z77 V pro
Intel i7 2700k
16gb ram
120gb ssd primary
2 x 1tb Raid 0
Windows 7 Sp1
Mcafee AV (used on indenticle spec machines)

A:Freshly built PC with 2 random NTOSKRNL.exe 0x0000000a & 0x00000109

Make sure you install the latest drivers from:ASUS - Motherboards- ASUS P8Z77-V PRO

Do not install any software apart from your drivers until you have it stable.

Also I would recommend Microsoft Security Essentials - Free Antivirus for Windows instead of mcafee.

Keep us posted

http://www.sevenforums.com/bsod-help-support/258752-freshly-built-pc-2-random-ntoskrnl-exe-0x0000000a-0x00000109.html
Relevancy 68.8%

The title is self-explainable.

The last 10 days I've been having many BSODs around the first half hour I start up my PC. After frequent BSODs, the PC seems to operate normally, until I shut it down and boot it up to experience the same issues.

Using NirSoft's BlueScreenView, I can only say that the most frequent "bug check code" is 0x00000109.
Others are 0x000000d1, 0x00000050, 0x0000003b, 0x0000000a and 0x0000004e.

So far I have only followed the BSOD posting instructions.
Thanks in advance for your support!

A:Lots of BSODs the last 10 days, frequent 0x00000109

Welcome
Looks like memory problems. I would test with memtest.
Run for 8 passes.
Run memtest for 8 passes
Then test each individual stick in a good slot for 6 passes.
If you have dual channel, the results may be incorrect, if shows pass.
Guide to using Memtest86+ - Geeks to Go Forums

http://www.sevenforums.com/bsod-help-support/265742-lots-bsods-last-10-days-frequent-0x00000109.html
Relevancy 67.08%

Hi everyone I get BSODs when I start up my pc from being 'cold' It does not happen when I simply restart nor during 'uptime' even under gaming load It's mostly IRQL NOT LESS OR EQUAL and PAGE FAULT IN NONPAGED AREA If you happen to look at the dump files you'll see that the last entries are SPECIAL POOL DETECTED MEMORY CORRUPTION This is because I tried the windows Driver Verifier and it almost broke my pc it but only boot', BSODs ntoskrnl+1509a9 on Consistent 'cold went in a full on boot loop and Consistent BSODs but only on 'cold boot', ntoskrnl+1509a9 I could only get it out using my installation usb drive I have since resolved this I also ran Memtest for a night this came back no errors file Spacboombox-sa - - zip pc specs as read by Speccy Operating System Windows Pro N -bit CPU Intel Core i GHz RAM GB Single-Channel DDR MHz Motherboard Gigabyte Technology Co Ltd Z -D H-CF SOCKET Graphics Intel HD Graphics Gigabyte MB ATI AMD Radeon R Series Gigabyte Storage GB Samsung SSD EVO GB SSD GB Western Digital WDC WD EZRX- L HB SATA GB Western Digital WD Ext HDD USB Device SSD Optical Drives ATAPI iHAS E DTSOFT Virtual CdRom Device Audio Realtek High Definition Audio I hope somebody can help me I really do not want to do a clean install if that is in any way possible regards Spaceboombox

Relevancy 65.36%

As the title states I've been getting frequent bluescreens while on youtube and gaming "ntoskrnl.exe+7f1c0" on bluescreens while youtube and Frequent gaming I've just upgraded my computer and the bsods started to come after that The bluescreens that came from the use of youtube were caused by the f c adress in the ntoskrnl exe driver While gaming the bluescreens were caused by the ntoskrnl exe cc driver I would really need help as I'm getting sick of Frequent bluescreens while on youtube and gaming "ntoskrnl.exe+7f1c0" these bluescreens The number of bluescreens I've had while gaming and on youtube is Please help me if you can -Tuukka Is Windows - x -bit or x x - the original installed OS on the system Yes - an OEM or full retail version OEM - OEM came pre-installed on system - Full Retail you purchased it from retailer - What is the age of system hardware Brand new except for the HDD - What is the age of OS installation have you re-installed the OS I haven't had to re-install the OS PS The PS Perform file is maybe in finnish so ask if you need for translation

A:Frequent bluescreens while on youtube and gaming "ntoskrnl.exe+7f1c0"

Bumping, still need help...

http://www.sevenforums.com/bsod-help-support/229703-frequent-bluescreens-while-youtube-gaming-ntoskrnl-exe-7f1c0.html
Relevancy 61.92%

I'm working on my parents computer and they are randomly receiving BSODs. They tell me they usually receive them when browsing the internet and running several other programs at once. They are using a Dell Studio XPS 7100 running Windows Home Premium.

My guess is that the issue is driver related. The reason I think this is because I ran the driver verifier and it created a BSOD (this also created the last mini dump file in the attached files). The BSOD message said "A device driver attempting to corrupt the system has been caught. The faulty driver currently on the kernel stack must be replaced with a working version."

Would someone mind looking through the attached documents and letting me know if you see any problems?

A:Random BSODs ntoskrnl.exe+26ee0 & ntoskrnl.exe+5063dc

  
Quote: Originally Posted by RossTTU


I'm working on my parents computer and they are randomly receiving BSODs. They tell me they usually receive them when browsing the internet and running several other programs at once. They are using a Dell Studio XPS 7100 running Windows Home Premium.

My guess is that the issue is driver related. The reason I think this is because I ran the driver verifier and it created a BSOD (this also created the last mini dump file in the attached files). The BSOD message said "A device driver attempting to corrupt the system has been caught. The faulty driver currently on the kernel stack must be replaced with a working version."

Would someone mind looking through the attached documents and letting me know if you see any problems?


The verified crash was related to C:\Program Files (x86)\Lavasoft\Ad-Aware\KernExplorer64.sys

I would remove Ad-aware AT LEAST TO TEST

http://www.sevenforums.com/bsod-help-support/217564-random-bsods-ntoskrnl-exe-26ee0-ntoskrnl-exe-5063dc.html
Relevancy 53.75%

I've been battling this problem with my computer for months and haven't completely fixed it yet. The last two things on the chopping block for my PC is the mobo, processor, and video card, because I have replaced everything else trying to fix the problem and nothing has worked I have done a LOT of stuff in the past 6 months, so trust me when I say the memory, ssd, and power supply are cleared and not a part of the problem. It seems like I have memory leak issues with chrome, and sometimes chrome will close for no reason and when I try to click on the task bar chrome icon to open again the icon will turn into a square like chrome opened and then it just closes out again until I restart my computer.

A:Mostly ntoskrnl.exe BSODs

Please remove all pirated programs and such from your system before we can start troubleshooting.
The Forum rules is meant for everything regarding piracyDiscussing it,
Asking for guidance,
Asking for a crack,
The use of it,
Etc.





Quote:
4) No piracy or discussion of piracy allowed at all. Such as software, music, videos and other intellectual property violations (e.g. downloading youtube videos locally etc).

http://www.sevenforums.com/bsod-help-support/397374-mostly-ntoskrnl-exe-bsods.html
Relevancy 53.75%

I have been getting them more sporadically last year, but now they started occurring on a one per 2-4 days basis, it kind of gets annoying.

I uploaded the zip here: TinyUpload.com - best file hosting solution, with no limits, totaly free

I'd really appreciate some help, I tried several fixes ( sfc scannow, driver verifier, diagnosing memory probs with windows) but none of them worked so far.

A:BSODs due to ntoskrnl.exe

Please update drivers in red.
I can see traces of two AVs present on the system. Please remove them both:
Avast: https://www.avast.com/uninstall-utility
Norton: ftp://ftp.symantec.com/public/englis...moval_Tool.exe
Please test your RAM: RAM - Test with Memtest86+ - Windows 7 Help Forums
Eight passes per stick, please
Here's link for: ATK Package: ASUSTeK Computer Inc. -Support- Drivers and Download ATK Package

Code:
ASMMAP64.sys Thu Jul 2 11:13:26 2009 (4A4C7A36)
LENOVO ATK Hotkey ATK0101 ACPI UTILITY (also found in Asus systems)
http://www.carrona.org/drivers/driver.php?id=ASMMAP64.sys

tap0901t.sys Wed Sep 16 08:02:43 2009 (4AB07F83)

tap0901t.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

safedrv.sys Mon Oct 25 07:12:57 2010 (4CC511D9)
Garena Update - World of Warcraft
http://www.carrona.org/drivers/driver.php?id=safedrv.sys

ew_jubusenum.sys Mon Apr 23 03:57:08 2012 (4F94B6F4)
HUAWEI Mobile Connect - Bus Enumerate Device
http://www.carrona.org/drivers/driver.php?id=ew_jubusenum.sys

atkwmiacpi64.sys Tue Jul 2 10:35:32 2013 (51D290D4)
ATK WMIACPI Utility
http://www.carrona.org/drivers/driver.php?id=atkwmiacpi64.sys

SYMEVENT64x86.SYS Sat Jul 27 04:26:58 2013 (51F32FF2)
Norton Internet Security
http://www.carrona.org/drivers/driver.php?id=SYMEVENT64x86.SYS

SRTSPX64.SYS Sat Jul 27 04:45:06 2013 (51F33432)

SRTSPX64.SYS - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

SYMDS64.SYS Wed Jul 31 01:29:08 2013 (51F84C44)
Symantec/ Norton NIS/ N360 driver
http://www.carrona.org/drivers/driver.php?id=SYMDS64.SYS

ccSetx64.sys Thu Aug 15 05:20:37 2013 (520C4905)
Symantec/ Norton Common Client Settings Driver
http://www.carrona.org/drivers/driver.php?id=ccSetx64.sys

intelppm.sys Thu Aug 22 10:46:35 2013 (5215CFEB)
Intel Processor driver
http://www.carrona.org/drivers/driver.php?id=intelppm.sys

TeeDriverx64.sys Thu Sep 5 20:02:18 2013 (5228C72A)
Intel Management Engine Interface driver
http://www.carrona.org/drivers/driver.php?id=TeeDriverx64.sys

iwdbus.sys Thu Sep 26 23:38:04 2013 (5244A93C)
Intel WIDI Bus Enumerator driver[br]Related to Intel Widi - Wireless Display
http://www.carrona.org/drivers/driver.php?id=iwdbus.sys

AsHIDSwitch64.sys Tue Oct 8 03:45:17 2013 (525363AD)
HID driver for ASUS Wireless Radio Control
http://www.carrona.org/drivers/driver.php?id=AsHIDSwitch64.sys

RtsPer.sys Fri Oct 18 08:09:07 2013 (5260D083)
RealTek RTS PCIE READER Driver
http://www.carrona.org/drivers/driver.php?id=RtsPer.sys

000.fcl Fri Oct 18 09:16:31 2013 (5260E04F)
CyberLink FCL Driver
http://www.carrona.org/drivers/driver.php?id=000.fcl

igdkmd64.sys Wed Nov 13 16:26:34 2013 (52839A2A)
Intel Graphics driver
http://www.carrona.org/drivers/driver.php?id=igdkmd64.sys

AsusTP.sys Wed Nov 20 03:47:20 2013 (528C22B8)
Asis transformer pad filter driver
http://www.carrona.org/drivers/driver.php?id=AsusTP.sys

Rt630x64.sys Tue Nov 26 08:32:54 2013 (52944EA6)
Realtek PCI/PCIe Adapters
http://www.carrona.org/drivers/driver.php?id=Rt630x64.sys

Ironx64.SYS Tue Dec 3 19:53:35 2013 (529E28AF)
Symantec/ Norton NIS/ N360 driver
http://www.carrona.org/drivers/driver.php?id=Ironx64.SYS

nvlddmkm.sys Tue Dec 24 20:41:39 2013 (52B9E373)
nVidia Video drivers
http://www.carrona.org/drivers/driver.php?id=nvlddmkm.sys

Teefer.sys Fri Jan 3 23:21:55 2014 (52C73803)
Probably used by Norton Symantec
http://www.carrona.org/drivers/driver.php?id=Teefer.sys

btmaux.sys Mon Feb 3 12:31:32 2014 (52EF7E14)
Intel Bluetooth Auxiliary Service
http://www.carrona.org/drivers/driver.php?id=btmaux.sys

btmhsf.sys Thu Feb 20 15:42:24 2014 (53061450)
Intel Proset Bluetooth HighSpeed Filter Driver
http://www.carrona.org/drivers/driver.php?id=btmhsf.sys

SYMNETS.SYS Sat Feb 22 00:06:30 2014 (5307DBF6) ... Read more

http://www.eightforums.com/bsod-crashes-debugging/63242-bsods-due-ntoskrnl-exe.html
Relevancy 53.75%

For the past week I've been getting frequent BSODs that don't seem to occur in any sort of pattern. Sometimes my laptop will be on for hours before it happens. The BSOD problem used to occur infrequently (i.e. once a month) that I didn't really pay attention, but I really want to get this fixed. BlueScreenView pinpoints the common denominator to ntoskrnl.exe. 
 
I've attached the minidump (hopefully I did this right since I had to tweak around with the user access permissions) and the MiniToolbox files. 
 
Speccy:
http://speccy.piriform.com/results/UIoa7q5RhkovXPIae0qtBPr
 
I'm not very good with computers so I would really appreciate any help.
 
Thank you!

A:ntoskrnl.exe BSODs

Hi,
 
As a first step update Avast Free to the latest program version 9.0.2013.  The version you have installed has been linked to BSOD's.

http://www.bleepingcomputer.com/forums/t/523125/ntoskrnlexe-bsods/
Relevancy 53.75%

Hello I'm new here but after many Googles for ntoskrnl.exe - BSODs a solution to my problem kept bringing me back here I decided to register and ask those more techy then me for help The Background The system was built from an extra CPU and graphics card we had to serve as a Mobile NAS TelePrompter Render Box DV Recorder for our video editing company The Current Build MOBO Gigabyte GA-MA GM-S H CPU AMD Athlon GFX MSI nVidia GTX RAM GB Crucial Basilix DDR HD GB Western Digital SATA PSU PC Power amp Cooling Silencer W OS Windows XP x SP PCI Q-Stor QU FCNPCI FireWire USB BSODs - ntoskrnl.exe Card The Problem Random crashes attributed to ntoskrnl exe The crashes can happen at ANY time under full load during large file transfers idle during a screen saver Anytime This is especially bad when you are in the middle of a recording session and your DV Recorder Teleprompter and Storage Device all suddenly die The Attempted Fixes New PSU New MoBo New RAM New Harddrive New CPU HSF Increased Case ventilation different installs of Windows XP different installs of Windows XP x Memtest for hours on both sets of memory Prime torture test for hours until crash occured Any help would be most appreciated I have attached a bunch of MiniDumps for those that want to look BSODs - ntoskrnl.exe over them Thanks - Xevin

A:BSODs - ntoskrnl.exe

Keyboard issue
Miscellaneous corruption
Corrupt boot.ini file.
Missing boot.ini file.
Missing or corrupt ntoskrnl.exe file.
Windows NT installed on a partition bigger then 7.8GB
Corrupted hard disk drive or severely corrupted Windows.


Pick one that fits.....haha all kidding aside it sounds like one of the above!

http://www.techsupportforum.com/forums/f10/bsods-ntoskrnl-exe-241298.html
Relevancy 53.75%

My computer has periods where it crashes with a BSOD over and over again. This lasts for a day or more then it decides to go back to functioning properly. They always seem to be related to ntoskrnl.exe.

I've tried working out what the problem with no success, which is why I came here. Another thing I've noticed is that my computer doesn't make a .dmp file every time. Today I have had about five BSODs but there are only two .dmp files.

If someone who knows what they are doing could have a look at these .dmp files, it would be much appreciated.

A:BSODs - ntoskrnl.exe

Woops, forgot to include these details:

OS: windows 7 home premium (64 bit)
Ram: 6gb
Motherboard: Gigabyte X58AUD36
Processor: i7
Video card: Nvidia GeForce GTX460

http://www.sevenforums.com/bsod-help-support/154671-bsods-ntoskrnl-exe.html
Relevancy 53.75%

Hi
I have had BSODS since i have this computer, i figured out it works flawless without the graphics card( using intel gpu) and only 1 ram stick, i havent had a single BSOD in 3 weeks. So i thought these are the problem. I RMAed them, i got the new graphics card and ram, but now i have the problems again.
System:
-x64
-Full Retail
-3 months old
-Os same

I already uninstalled stpd.sys
Hope somebody can help me.

A:BSODS ntoskrnl.exe

More than half point directly to memory and abt 8 others indirectly.
These crashes were caused by memory corruption/exception (probably a driver).
Please run these two tests to verify your memory and find which driver is causing the problem.

* If you are overclocking anything reset to default before running these tests.
In other words STOP!!!

* If you have raid update its Driver.

Memtest.





Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.



RAM - Test with Memtest86+

Driver verifier






Quote:
Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

So, I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Special Pool", "Force Pending I/O Requests" and "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen.
Continue to use your system normally, and if you know what causes the crash, do that repeatedly.
The objective here is to get the system to crash because Driver Verifier is stressing the drivers out.
If it doesn't crash for you, then let it run for at least 36 hours of continuous operation.

Reboot into Windows (after the crash) and turn off Driver Verifier by going back in and selecting "Delete existing settings" on the first page, then locate and zip up the memory dump file and upload it with your next post.

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.

http://www.sevenforums.com/bsod-help-support/216904-bsods-ntoskrnl-exe.html
Relevancy 53.75%

I've had my lenovo T laptop since August of and I believe I had one or two blue screens sometime in or early but it doesn't appear on my dump all contain BSODs ntoskrnl.exe - files so maybe I'm wrong But my major blue screen problems started just a month ago The History I had an issue with Mcafee Antivirus where it locked down my internet for a few days as I BSODs - all contain ntoskrnl.exe later discovered At the time all I knew was that internet wouldn't work on my computer I took my computer to an IT guy and we messed around with network settings including turning off ivp but couldn't seem to get BSODs - all contain ntoskrnl.exe the internet back on track He concluded that it was a virus I ran Super-Anti-Spyware Combofix and malwarebytes but could not find anything serious Eventually a family member told me that he had uninstalled and reinstalled Mcafee Antivirus and that had fixed the issue But I BSODs - all contain ntoskrnl.exe was fed up so i uninstalled my Mcafee and installed free versions of Avast Antivirus and ZoneAlarm This whole fiasco happened during the week of August - As the minidumps show my blue screen problems began on August and have been occurring with increasing frequency ever since with about blue screens in the past weeks The most recent blue screen happened today just as I was uninstalling ZoneAlarm Tonight I uninstalled ZoneAlarm it uninstalled successfully on the second try and Hamichi a VPN software Other programs Not sure if my zip file shows it but other recently installed prorgams include F lux intelWireless wifi update google talk plugin windows driver kit bluescreen microsoft document explorer update for Evernote power manager for lenovo launchy intel HD graphics driver on etc Hardware In terms of hardware changes I installed a new stick of RAM this past June As soon as I get the time I'm gonna run memtest and post the results here Setting In terms of activities I'm not sure I'm consistently doing anything when the blue screens occur They seem to happen randomly Summary I hope this information helped I'm pretty clueless as to what's going on but I saw that this was a vibrant community that had helped lots of people and decided to post If I need to provide additional information please let me know I really need to get this laptop back on track Thanks for the help I appreciate it

A:BSODs - all contain ntoskrnl.exe

Welcome to SevenForums

I'm going through your .dmp files, will report anything I find. Can you tell me if McAfee is currently installed on your laptop?

Fill in your system specs as well:
__________________
Click on User CP on the top right of this page
Click on Edit System Spec
Fill in your computer specsSystem Info - See Your System Specs

__________________

http://www.sevenforums.com/bsod-help-support/262215-bsods-all-contain-ntoskrnl-exe.html
Relevancy 53.75%

I originally posted in the Windows forum but I was redirected to this one Here is the original topic with more detailed description of ntoskrnl.exe BSODs Having my problem - http www bleepingcomputer com forums t bsod-ntoskrnlexe I had some hardware related frequent BSODs before however they stopped after changing Having BSODs ntoskrnl.exe my Athlon with Phenom t Now after one month without BSODs with my new CPU I am experiencing some BSODs once per day after the first boot of my system Here is the rar with the minidumps the old ones ntoskernel exe a and the new ones ntoskernel exe - https app box com s ntsqxuw ia vgt ugu Speccy Report - http speccy piriform com results QEAVtPvYm knDZX rOvYLp Here is the Bugcheck analysis of the latest Having BSODs ntoskrnl.exe dump Microsoft reg Windows Debugger Version AMD Copyright copy Microsoft Corporation All rights reserved Loading Dump File C Users Hristo Desktop DMP - - dmp Mini Kernel Dump File Only registers and stack trace are available Symbol search path is SRV c symbols http msdl microsoft com download symbols Executable search path is Windows Kernel Version Service Pack MP procs Free x Product WinNt suite TerminalServer SingleUserTS Built by amd fre win sp gdr - Machine Name Kernel base xfffff c e PsLoadedModuleList xfffff e d Debug session time Wed Sep UTC System Uptime days Loading Kernel Having BSODs ntoskrnl.exe Symbols Loading User Symbols Loading unloaded module list Bugcheck Analysis Use analyze -v to get detailed debugging information BugCheck E ffffffffc fffff c bb fffff c f fffff c f Probably caused by cdrom sys cdrom RequestProcessSerializedIoctl cdb Followup MachineOwner --------- kd gt analyze -v Bugcheck Analysis SYSTEM THREAD EXCEPTION NOT HANDLED M e This is a very common bugcheck Usually the exception address pinpoints the driver function that caused the problem Always note this address as well as the link date of the driver image that contains this address Some common problems are exception code x This means a hard coded breakpoint or assertion was hit but this system was booted NODEBUG This is not supposed to happen as developers should never have hardcoded breakpoints in retail code but If this happens make sure a debugger gets connected and the system is booted DEBUG This will let us see why this breakpoint is happening Arguments Arg ffffffffc The exception code that was not handled Arg fffff c bb The address that the exception occurred at Arg fffff c f Exception Record Address Arg fffff c f Context Record Address Debugging Details ------------------ EXCEPTION CODE NTSTATUS xc - The instruction at x lx referenced memory at x lx The memory could not be s FAULTING IP nt RtlpInterlockedPushEntrySList fffff c bb d mov qword ptr r r EXCEPTION RECORD fffff c f -- exr xfffff c f ExceptionAddress fffff c bb nt RtlpInterlockedPushEntrySList x ExceptionCode c Access violation ExceptionFlags NumberParameters Parameter Parameter ffffffffffffffff Attempt to read from address ffffffffffffffff CONTEXT fffff c f -- cxr xfffff c f rax e rbx fffffa f a rcx fff fa rdx fffffa c ad rsi fffffa f d rdi fff fa rip fffff c bb rsp fffff c rbp r fffffa c ad r fffff e be r fffffa f a r fff fa r fffffa ec r fffffa e r fffffa r fffffa d a iopl nv up ei ng nz na po nc cs ss ds b es b fs gs b efl nt RtlpInterlockedPushEntrySList x fffff c bb d mov qword ptr r r ds b fff fa Resetting default scope CUSTOMER CRASH COUNT DEFAULT BUCKET ID WIN DRIVER FAULT PROCESS NAME System CURRENT IRQL ERROR CODE NTSTATUS xc - The instruction at x lx referenced memory at x lx The memory could not be s EXCEPTION PARAMETER EXCEPTION PARAMETER ffffffffffffffff READ ADDRESS GetPointerFromAddress unable to read from fffff ecb GetUlongFromAddress unable to read from fffff ecb c ffffffffffffffff FOLLOWUP IP cdrom RequestProcessSerializedIoctl cdb fffff cd c d c c lea r rsp C h BUGCHECK STR x E LAST CONTROL TRANSFER from fffff e b to fffff c bb STACK TEXT fffff c fffff e b fffffa fffffa f d fffffa nt RtlpInterlocked... Read more

A:Having BSODs ntoskrnl.exe

Hi
 
While you are waiting for help from a Malware removal expert, please uninstall daemon tools as a test. At least one or more blue screens are caused by virtual CD drivers used by this program.

fffff880`031c4298 fffff880`0104de0aUnable to load image \SystemRoot\System32\Drivers\sptd.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for sptd.sys
*** ERROR: Module load completed but symbols could not be loaded for sptd.sys

After uninstalling "Daemon tools" and any other virtual drive program, download and run SPTD removal tool from the below link.
 
http://www.duplexsecure.com/download/SPTDinst-v183-x64.exe
 
Run the tool and press the Uninstall button to remove SPTD properly.
 
 
 
Also follow any instructions given by a malware helper.

http://www.bleepingcomputer.com/forums/t/508203/having-bsods-ntoskrnlexe/
Relevancy 53.75%

Hi folks,

Within the past month, I've been getting BSOD that reference to ntoskrnl.exe. It happens when I do anything using video, ie., watching DVDs, playing BFBC2, or even online flash games.

I bought this machine about 2 months ago and installed windows 7 onto it myself and it was running fine up until about a month ago. All drivers are up to date.
Today, I tried reinstalling Windows and updating drivers but the problem did not get alleviated.

Some basic specs on my machine:
-AMD Quad Core 3.2GHz CPU
-NVIDIA GeForce GT 220 1GB Graphics Card
-2x 2GB Corsair RAM

I'll attach the minidump for the BSOD since I had reinstalled Windows 7

Any help would be awesome!

A:Need Help With ntoskrnl.exe BSODs!

  
Quote: Originally Posted by LiquidViolist


Hi folks,

Within the past month, I've been getting BSOD that reference to ntoskrnl.exe. It happens when I do anything using video, ie., watching DVDs, playing BFBC2, or even online flash games.

I bought this machine about 2 months ago and installed windows 7 onto it myself and it was running fine up until about a month ago. All drivers are up to date.
Today, I tried reinstalling Windows and updating drivers but the problem did not get alleviated.

Some basic specs on my machine:
-AMD Quad Core 3.2GHz CPU
-NVIDIA GeForce GT 220 1GB Graphics Card
-2x 2GB Corsair RAM

I'll attach the minidump for the BSOD since I had reinstalled Windows 7

Any help would be awesome!


This crash was caused by memory management. I would download memtestx86 and run it for 5 passes.

let us know if you need help

Ken

http://www.sevenforums.com/bsod-help-support/74768-need-help-ntoskrnl-exe-bsods.html
Relevancy 53.75%

Hi all New to the forum I built this Windows bit system back in BSODS ...ntoskrnl.exe march or april I have had random BSOD from the start They were infrequent and for about a or month period they went away and the system BSODS ...ntoskrnl.exe ran great so I figured I was home free Unfortunately the BSODS are back and are frequent almost every couple of hours I have tested the ram and had a computer service company test it as well seems its ok They deleted my Norton Internet Security as they said it was causing the BSODS not the case I've deleted the Catylist Control Center off the system as I heard it caused issues with Win bit I have tried to load all the latest drivers but I'm having no luck The errors I get are usually one of two quot Page Fault in Nonpaged Area quot or quot Memory Management quot The likely cause points to a problem with the ntoskrnl exe per WhoCrashed I unfortunately am not having any luck and thought I'd post here The dump files are attached Any help is appreciated System Info i Win Home Premium bit Gigabyte X A-UD r Gb Corsair CMX GX M A- C Video Card Asus EAX Hard Drives WD Gb Velociraptor WD GLFSRTL WD Caviar Black Tb WD LSRTL Power Thermaltake Model TR RX- AP

A:BSODS ...ntoskrnl.exe

  
Quote: Originally Posted by Gooman


Hi all,

New to the forum. I built this Windows 7 64 bit system back in march or april. I have had random BSOD from the start. They were infrequent and for about a 2 or 3 month period, they went away and the system ran great so I figured I was home free. Unfortunately, the BSODS are back and are frequent (almost every couple of hours).

I have tested the ram and had a computer service company test it as well...seems its ok. They deleted my Norton Internet Security as they said it was causing the BSODS...not the case. I've deleted the Catylist Control Center off the system as I heard it caused issues with Win 7 64bit. I have tried to load all the latest drivers, but I'm having no luck. The errors I get are usually one of two "Page Fault in Nonpaged Area" or "Memory Management". The likely cause points to a problem with the ntoskrnl.exe (per WhoCrashed). I unfortunately am not having any luck and thought I'd post here. The dump files are attached.

Any help is appreciated.



System Info
i7 930
Win 7 Home Premium 64 bit
Gigabyte X56A-UD3r
6 Gb Corsair CMX6GX3M3A-1600C9
Video Card: Asus EAX5850
Hard Drives:
WD 300 Gb Velociraptor WD3000GLFSRTL
WD Caviar Black 1 Tb WD10000LSRTL
Power: Thermaltake Model TR2 RX-850 AP



Norton needs to be un-installed with their uninstall tool.
The video drivers also need an uninstaller.

Download and run the Norton Removal Tool to uninstall your Norton product | Norton Support

When upgrading your graphic driver you MUST remove all traces of the current driver. In order to do that we recommend using Guru3D - Driver Sweeper

When it is removed then download and install the fresh copy.

The DMP's dont specifiy which driver is causing the problem so run driver verifier to narrow it down.

Beyond that, please run Verifier with these settings:
[quote]
Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

So, I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
NOTE: You can use Low Resource Simulation if you'd like. From my limited experimentation it makes the BSOD's come faster.
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

Reboot into Windows (after the crash) and turn off Driver Verifier by going back in and selecting "Delete existing settings" on the first page, then locate and zip up the memory dump file and upload it with your next post.

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Res... Read more

http://www.sevenforums.com/bsod-help-support/121913-bsods-ntoskrnl-exe.html
Relevancy 53.75%

Hello. Over the past 18 days since I've had Windows 8 installed, I've been getting multiple BSODs at random with ntosknrl.exe being the root cause, and it's been driving me crazy trying to figure out why.

I've attached a .rar of the SF tool files. Any help would be appreciated.

A:ntoskrnl.exe BSODs

It just happened again when I wasn't around my laptop for 15 minutes. Attached is the new .dmp it created.

http://www.eightforums.com/bsod-crashes-debugging/24419-ntoskrnl-exe-bsods.html
Relevancy 53.75%

Hello

Got a new Win8.1 64x PC with specs:
CPU: Intel Core i5-4440
Motherboard: Gigabyte GA-P85-D3 P85
VGA: Gigabyte 2048Mb GF GTX 760 OC GV-N760OC-2GD
RAM: Corsair DDR3 (CMX4GX3M1A1600C9) 4Gb x2
SSD: Crucial M500 CT120M500SSD1

Every 1-2 hour when i play any game i got BSOD (attached minidumps)

What i tried:
Upgrade every driver i can (even upgraded SSD firmware today)
Full chkdsk for both SSD and my old HDD (it take about 6 hours)
Adjusted RAM voltage to 1.65V like it says in specs from standart 1.5V (thought BIOS would do it by itself)
Memory test for RAM (windows diagnostic util + complete MemTest86 with no errors)
And it keeps happening

What else can i do to find a reason?
Thanks

EDIT: New minidump
EDIT2: Another minidump

A:Various BSODs about ntoskrnl.exe

How long have you run the memory test ? According to the dump files, you have 4 BSOD's caused by memory corruption and crashed on various processes. Memory test needs to run at least 6-8 hours unless errors occurs before. The first couple of passes do not garantee your RAM is good.

In addition, for testing purpose I suggest that you uninstall Kapersky completely.

http://www.eightforums.com/bsod-crashes-debugging/49430-various-bsods-about-ntoskrnl-exe.html
Relevancy 53.75%

I've been getting 4 BSODs over the past 9 days or so after a year of everything running fine, so I know something must be up. 3 of the BSODs included the ntoskrnl.exe , so I put it into the header.

I added the info as described in the BSOD starter thread and also the 4 Minidump files.

Specs are as follows:

? OS - Windows 7 Home Premium
? x64
? full retail
? installed since May 2012

? Intel Core i5 3570K @ 3.40GHz
? 2048MB NVIDIA GeForce GTX 670 (NVIDIA)
? Gigabyte Technology Co., Ltd. Z77-DS3H (Intel Core i5-3570K CPU @ 3.40GHz)
? Power Supply - SilverStone 500W

. system was assembled on order, no manufacturer

A:Getting ntoskrnl.exe BSODs

Hi,

We have four dumps, three consistent *A bugchecks and one *9C:

IRQL_NOT_LESS_OR_EQUAL (a)

A kernel-mode driver or process attempted to access a protected memory location it does not have permission for, or a kernel interrupt request level (IRQL) attempted to access a memory address that is too high.

This bugcheck usually occurs when a driver uses an incorrect memory address. Other possible causes of this error include: bug in a device driver, system service, the BIOS, an old Anti-virus program or backup tool, or possibly memory issues.

MACHINE_CHECK_EXCEPTION (9c)

The processor detected a fault. This fault is called the Machine Check Exception. Some of the causes include:
Processor specific detected hardware problems
Processor internal memory cache errors
System bus errors
Memory errors that may include parity or Error Correction Code (ECC) problems
Due to the following two bugchecks being in conjunction with each other, possible memory issues, so let's start by running a Memtest for no less than ~8 passes (several hours):
Memtest86+:

Download Memtest86+ here:

Memtest86+ - Advanced Memory Diagnostic Tool

Which should I download?

You can either download the pre-compiled ISO that you would burn to a CD and then boot from the CD, or you can download the auto-installer for the USB key. What this will do is format your USB drive, make it a bootable device, and then install the necessary files. Both do the same job, it's just up to you which you choose, or which you have available (whether it's CD or USB).

How Memtest works:

Memtest86 writes a series of test patterns to most memory addresses, reads back the data written, and compares it for errors.

The default pass does 9 different tests, varying in access patterns and test data. A tenth test, bit fade, is selectable from the menu. It writes all memory with zeroes, then sleeps for 90 minutes before checking to see if bits have changed (perhaps because of refresh problems). This is repeated with all ones for a total time of 3 hours per pass.

Many chipsets can report RAM speeds and timings via SPD (Serial Presence Detect) or EPP (Enhanced Performance Profiles), and some even support changing the expected memory speed. If the expected memory speed is overclocked, Memtest86 can test that memory performance is error-free with these faster settings.

Some hardware is able to report the "PAT status" (PAT: enabled or PAT: disabled). This is a reference to Intel Performance acceleration technology; there may be BIOS settings which affect this aspect of memory timing.

This information, if available to the program, can be displayed via a menu option.

Any other questions, they can most likely be answered by reading this great guide here:

FAQ : please read before posting

Regards,

Patrick

http://www.techsupportforum.com/forums/f299/getting-ntoskrnl-exe-bsods-705484.html
Relevancy 53.75%

Good evening I was wondering if anyone could help me diagnose some dmp file data please When I first bought my computer I would occasionally experience bluescreens restarts upon my computer going into sleep mode BSoDs ntoskrnl.exe Error message DRIVER POWER STATE ntoskrnl.exe BSoDs FAILURE I updated my BIOS to try to help the issue and haven't had the same type since although this may be due to me only putting the computer to sleep manually now However I have started getting more frequent BSoDs error message UNEXPECTED KERNEL MODE TRAP These happen randomly during internet browsing watching DVDs or when idle Firefox seems to be a bit unstable on my system Could this be related Using bluescreenview and whocrashed to view my minidumps it is clear that ntoskrnl exe is implicated in all of these crashes My memory and system files seem to be ok from the tests that I have done and dskchk reported no problems either I have attached my dmp files to this post and included the bugcheck codes below My system specs can be found in my profile if they are important ASUS P P D Pro Core i processor gb corsair RAM ATI HD Thank you in advance for any help Quote On Tue PM your computer crashed This was likely caused by the following module ntoskrnl exe Bugcheck code x F x x x F xFFFFF A E F Error UNEXPECTED KERNEL MODE TRAP On Tue AM your computer crashed This was likely caused by the following module ntoskrnl exe Bugcheck code x F x x x F xFFFFF AA F Error UNEXPECTED KERNEL MODE TRAP On Sat PM your computer crashed This was likely caused by the following module ntoskrnl exe Bugcheck code x F x x x F xFFFFF A F Error UNEXPECTED KERNEL MODE TRAP On Mon PM your computer crashed This was likely caused by the following module ntoskrnl exe Bugcheck code x F x xFFFFFA B A xFFFFF xFFFFFA E A D Error DRIVER POWER STATE FAILURE On Mon PM your computer crashed This was likely caused by the following module ntoskrnl exe Bugcheck code x F x xFFFFFA A xFFFFF B C xFFFFFA F FD Error DRIVER POWER STATE FAILURE On Wed PM your computer crashed This was likely caused by the following module ntoskrnl exe Bugcheck code x F x xFFFFFA A A xFFFFF B xFFFFFA F Error DRIVER POWER STATE FAILURE On Mon PM your computer crashed This was likely caused by the following module ntoskrnl exe Bugcheck code x F x xFFFFFA AFDA xFFFFF xFFFFFA D Error DRIVER POWER STATE FAILURE

A:ntoskrnl.exe BSoDs

Your problem seems to be based around network drivers
all dumps point at either rt64win7.sys or netio.sys

Rt64win7.sys is realtek NIC driver
http://www.realtek.com/downloads/dow...Level=3&Conn=2

Try updating all networking drivers you can, you need to go to manufacturers website of your equipment and find the latest drivers you can, dont use update driver option in device manager as it may not help, wont always give you the latest

Sometimes this can be related to your AV software, what are you using?

http://www.sevenforums.com/bsod-help-support/56700-ntoskrnl-exe-bsods.html
Relevancy 53.75%

Hello

Got a new Win8.1 64x PC with specs:
CPU: Intel Core i5-4440
Motherboard: Gigabyte GA-P85-D3 P85
VGA: Gigabyte 2048Mb GF GTX 760 OC GV-N760OC-2GD
RAM: Corsair DDR3 (CMX4GX3M1A1600C9) 4Gb x2
SSD: Crucial M500 CT120M500SSD1

Every 1-2 hour when i play any game i got BSOD (attached minidumps)

What i tried:
Upgrade every driver i can (even upgraded SSD firmware today)
Full chkdsk for both SSD and my old HDD (it take about 6 hours)
Memory test for RAM (some tool like memtest.org, really forget the name)
Adjusted RAM voltage to 1.65V like it says in specs from standart 1.5V

And it keeps happening

What else can i do to find a reason?
Thanks

A:Various BSODs about ntoskrnl.exe

Please post here: BSOD Crashes and Debugging - Windows 8 Forums

http://www.sevenforums.com/bsod-help-support/336822-various-bsods-about-ntoskrnl-exe.html
Relevancy 53.32%

Need help with this I used a program called quot WhoCrashed quot to read the dmp files that were created after the BSODs Crash reports as follows On Thu AM GMT your computer crashed crash dump file C Windows Minidump - - dmp This was probably caused by the following module ntoskrnl exe nt x Bugcheck code x xFFFFFA A C xFFFFFA DB D x x Error REFERENCE BY POINTER file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System Bug check description This indicates that the reference count of an object is illegal for the current state of the object This appears to be a typical software driver bug and is not likely to be caused by a hardware problem This might be a case of memory corruption More often memory corruption happens because of software errors ??? ntoskrnl.exe, cdd.dll BSODs, fltmgr.sys, in buggy drivers not because of faulty RAM modules The crash took place in the Windows kernel Possibly this BSODs, ntoskrnl.exe, fltmgr.sys, cdd.dll ??? problem is caused by another driver BSODs, ntoskrnl.exe, fltmgr.sys, cdd.dll ??? which cannot be identified at this time On Tue PM GMT your computer crashed crash dump file C Windows Minidump - - dmp This was probably caused by the following module cdd dll cdd x DD Bugcheck code x E xFFFFFFFFC xFFFFF DD xFFFFF FE xFFFFF Error SYSTEM THREAD EXCEPTION NOT HANDLED M file path C Windows system cdd dll product Microsoft Windows Operating System company Microsoft Corporation description Canonical Display Driver Bug check description This indicates that a system thread generated an exception which the error handler did not catch This appears to be a typical software driver bug and is not likely to be caused by a hardware problem The crash took place in a standard Microsoft module Your system configuration may be incorrect Possibly this problem is caused by another driver on your system which cannot be identified at this time On Wed PM GMT your computer crashed crash dump file C Windows Minidump - - dmp This was probably caused by the following module ntoskrnl exe nt x Bugcheck code x A x xFFFFFA C xFFFF x Error MEMORY MANAGEMENT file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System Bug check description This indicates that a severe memory management error occurred This might be a case of memory corruption More often memory corruption happens because of software errors in buggy drivers not because of faulty RAM modules The crash took place in the Windows kernel Possibly this problem is caused by another driver which cannot be identified at this time On Wed PM GMT your computer crashed crash dump file C Windows Minidump - - dmp This was probably caused by the following module fltmgr sys fltmgr x B Bugcheck code x E xFFFFFFFFC xFFFFF B x x Error KMODE EXCEPTION NOT HANDLED file path C Windows system drivers fltmgr sys product Microsoft Windows Operating System company Microsoft Corporation description Microsoft Filesystem Filter Manager Bug check description This indicates that a kernel-mode program generated an exception which the error handler did not catch This appears to be a typical software driver bug and is not likely to be caused by a hardware problem The crash took place in a standard Microsoft module Your system configuration may be incorrect Possibly this problem is caused by another driver on your system which cannot be identified at this time On Sat PM GMT your computer crashed crash dump file C Windows Minidump - - dmp This was probably caused by the following module ntoskrnl exe nt x Bugcheck code x xFFFFF A F F F x xFFFFF A D x Error PAGE FAULT IN NONPAGED AREA file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System Bug check description This indicates that invalid system memory has been referenced This appears to be a typic... Read more

A:BSODs, ntoskrnl.exe, fltmgr.sys, cdd.dll ???

  
Quote: Originally Posted by smilingbounder


Need help with this. I used a program called "WhoCrashed" to read the .dmp files that were created after the BSODs.

Crash reports as follows:



On Thu 6/30/2011 11:04:10 AM GMT your computer crashed
crash dump file: C:\Windows\Minidump\063011-25687-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x70700)
Bugcheck code: 0x18 (0xFFFFFA80018A8C90, 0xFFFFFA8006DB5D10, 0x1, 0x200000000)
Error: REFERENCE_BY_POINTER
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft? Windows? Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that the reference count of an object is illegal for the current state of the object.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem. This might be a case of memory corruption. More often memory corruption happens because of software errors in buggy drivers, not because of faulty RAM modules.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver which cannot be identified at this time.
On Tue 6/28/2011 7:55:03 PM GMT your computer crashed
crash dump file: C:\Windows\Minidump\062811-27312-01.dmp
This was probably caused by the following module: cdd.dll (cdd+0x200DD)
Bugcheck code: 0x1000007E (0xFFFFFFFFC0000005, 0xFFFFF960007400DD, 0xFFFFF88002466FE8, 0xFFFFF88002466850)
Error: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M
file path: C:\Windows\system32\cdd.dll
product: Microsoft? Windows? Operating System
company: Microsoft Corporation
description: Canonical Display Driver
Bug check description: This indicates that a system thread generated an exception which the error handler did not catch.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system which cannot be identified at this time.
On Wed 6/15/2011 6:49:12 PM GMT your computer crashed
crash dump file: C:\Windows\Minidump\061511-21968-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x70700)
Bugcheck code: 0x1A (0x41790, 0xFFFFFA800021C660, 0xFFFF, 0x0)
Error: MEMORY_MANAGEMENT
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft? Windows? Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that a severe memory management error occurred.
This might be a case of memory corruption. More often memory corruption happens because of software errors in buggy drivers, not because of faulty RAM modules.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver which cannot be identified at this time.
On Wed 6/15/2011 6:41:23 PM GMT your computer crashed
crash dump file: C:\Windows\Minidump\061511-22937-01.dmp
This was probably caused by the following module: fltmgr.sys (fltmgr+0x3B07)
Bugcheck code: 0x1E (0xFFFFFFFFC0000005, 0xFFFFF88001110B07, 0x0, 0x200000028)
Error: KMODE_EXCEPTION_NOT_HANDLED
file path: C:\Windows\system32\drivers\fltmgr.sys
product: Microsoft? Windows? Operating System
company: Microsoft Corporation
description: Microsoft Filesystem Filter Manager
Bug check description: This indicates that a kernel-mode program generated an exception which the error handler did not catch.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system which cannot be identified at this time.
On Sat 6/11/2011 6:46:12 PM GMT your computer crashed
crash dump file: C:\Windows\Minidump\061111-22312-01.dmp
This was proba... Read more

http://www.sevenforums.com/bsod-help-support/172542-bsods-ntoskrnl-exe-fltmgr-sys-cdd-dll.html
Relevancy 53.32%

Hi Through out the day I have received a few BSOD Stop errors as follows Firstly I received a BUGCODE USB DRIVER fe error indicating usbhub sys being the culprit this isn't the first time I received this particular error Only with Random BSODs ntoskrnl.exe different thing using the usb port at that time was my wireless microsoft mouse Code - - dmp AM BUGCODE USB DRIVER x fe fffffa ecf usbhub sys usbhub sys a c x ntoskrnl exe I BSOD Investigation - - dmp AM Shutting down later that day I received a DRIVER POWER STATE f error which blamed ntoskrnl exe as the culprit Code - - dmp PM DRIVER POWER STATE FAILURE x f fffffa f fffff b a d fffffa bb ntoskrnl exe ntoskrnl exe x ntoskrnl exe I BSOD Investigation - - Random different BSODs with ntoskrnl.exe dmp PM Later on for testing purposes attempted to run verifier and received lots of DRIVER VERIFIER DETECTED VIOLATION c error on both restarts before disabling verifier from safe mode First C Error Code - - dmp PM Random different BSODs with ntoskrnl.exe DRIVER VERIFIER DETECTED VIOLATION x c tcpipreg sys tcpipreg sys a x ntoskrnl exe I BSOD Investigation - - dmp PM Second C Error Code - - dmp PM DRIVER VERIFIER DETECTED VIOLATION Random different BSODs with ntoskrnl.exe x c fffffa d be fffffa a d nvlddmkm sys nvlddmkm sys x ntoskrnl exe I BSOD Investigation - - dmp PM I used blue screen view to analyse and found that ntoskrnl exe seem to be present in almost all of the recent BSODs I received Ran System File Checker on that file and it indicated that it checked out fine Ran Windows Memory Diagnostic and came back clean Any help with this error would be appreciated Offending Computer Specifications Toshiba P PSAY A- L Laptop Running Windows x GB Ram Intel i - QM running at GHz Intel GB SSD

A:Random different BSODs with ntoskrnl.exe

Blue Screen of Death (BSOD) Posting Instructions

http://www.sevenforums.com/bsod-help-support/394673-random-different-bsods-ntoskrnl-exe.html
Relevancy 53.32%

Hi all,

I have a Sony Vaio VPCEE2M1E that Bluescreens on every use.

MY SYSTEM SPECS
OS: Windows 7 Home Premium 64Bit SP1
BIOS: InsydeH20 BIOS (Version R0210Z5)
RAM: 4GB DDR3 SDRAM
CPU: AMD Athlon(tm) II P320 Dual Core @2.1GHZ
HDD: Toshiba 500 GB SATA HDD
GPU: ATI Radeon HD 4200 Series

Other Problems

When I switch on the computer, I do not hear the fan spin.
Sometimes my speakers do not work.
Always Fails updates.

I will not have the dump files until Saturday 18th of August, because I am away from the computer.

Thanks!

A:Different BSoDs, mostly caused by ntoskrnl.exe

Excited about the dumps!
Upload them when you're ready.

Best Regards,
Frederik.

http://www.sevenforums.com/bsod-help-support/246100-different-bsods-mostly-caused-ntoskrnl-exe.html
Relevancy 53.32%

Hello everyone I have had my iBuypower prebuilt system for years roughly and I believe since the beginning I have had BSODs often during gaming but not always sometimes at the desktop I have tried googling these issues but I don't understand a lot of the jargon so I am still unsure what action to take Since I have gotten my computer I have only made one hardware change in the form of a video card upgrade from a Powercolor to an to ntoskrnl.exe and BSODs relating more... EVGA GTX I have had BSODs with both cards at the same rate so I don't hink its a hardware issue with the cards and I do keep my graphics drivers up to date I have flashed the BIOS on my Gigabyte motherboard and that stopped BSODs relating to ntoskrnl.exe and more... BSODs for about three months if I recall correctly but now they have started again Before BSODs relating to ntoskrnl.exe and more... that I tried SFC SCANNOW for my harddrive and have tested both RAM sticks with Memtest after the BIOS update According to bluescreenview exe the biggest culprit for driver causing the crash is ntoskrnl exe although there have been others listed These include one Nvidia driver incident two cases of tcpip sys and one case of ndis sys There was also something involving a USB driver a while back but I do not recall the exact name of the driver I recall seeing K MODE EXCEPTION NOT HANDELED SYSTEM SERVICE EXCEPTION and IRQL NOT LESS OR EQUAL and some other bug check strings accompanying these BSODs and I'll post the exact bug check strings when I can next access my desktop My system is as follows NZXT Case AMD FX- CPU GB DDR Crucial RAM EVGA GTX formerly Powercolor Gigabyte GA-M MT-S rev Motherboard XION watt PSU Onboard sound Realtek ALC codec and network Realtek RTL CL chip Mbit DVD burner TB hard drive I'll post the brand and more info once I get access to my troubled PC again I always keep Win up to date and I scan files and my computer with SuperAntiSpyware Emsisoft AVG SpyWare Blaster and Malwarebytes Anti Malware all of which are the free versions I update them and run them all on a weekly or more basis I also run a quick defrag occassionally and I have not reinstalled Win Home Premium at all I have a hunch that it may be mobo related but that's only a hunch Thanks in advance for any feedback and help

A:BSODs relating to ntoskrnl.exe and more...

I would install the latest video card and lan drivers

http://www.bleepingcomputer.com/forums/t/557962/bsods-relating-to-ntoskrnlexe-and-more/
Relevancy 53.32%

- Windows x Pro - Clean install less than a month ago - Retail version download - All new hardware exept an old DVD drive I built a new computer around two months ago I originally had Windows Server R as the OS but after finding a number of compatibility problems with it I formatted the drive and did a fresh install of Windows x Pro Frequent ntoskrnl.exe on PC new BSODs -- Ever since when I've been experiencing random BSODs -- it doesn't matter if I'm playing a game browsing the internet or even if the computer is sitting idle and it occurs irregularly too Does anyone have a minute to help me track down the source of these crashes I'm at a loss This is the information from the latest crash from WhoCrashed Code On Tue AM your computer crashed This was likely caused by the following module ntoskrnl exe Bugcheck code x A x xFFFFF x A xE D F Error MEMORY MANAGEMENT Dump file C Windows Minidump - - dmp file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System And from the Event Viewer Code System - Provider Name Microsoft-Windows-Kernel-Power Guid C B A- Frequent BSODs on new PC -- ntoskrnl.exe - C Frequent BSODs on new PC -- ntoskrnl.exe -AC E- C D B EventID Version Level Task Opcode Keywords x - TimeCreated SystemTime - Frequent BSODs on new PC -- ntoskrnl.exe - T Z EventRecordID Correlation - Execution ProcessID ThreadID Channel System Computer Hildebrandt-PC - Security UserID S- - - - EventData BugcheckCode BugcheckParameter x BugcheckParameter xfffff BugcheckParameter x a BugcheckParameter xe d f SleepInProgress false PowerButtonTimestamp

A:Frequent BSODs on new PC -- ntoskrnl.exe

There is no minidump files in the one you uploaded. Are you sure it is BSODs? Are you using any program such as CCleaner or some clean tools like that?

http://www.sevenforums.com/bsod-help-support/97358-frequent-bsods-new-pc-ntoskrnl-exe.html
Relevancy 53.32%

I'm getting BSODs almost every night. Attached is the result of DM Log Collector. Would appreciate some help.

A:BSODs overnight mainly in ntoskrnl.exe

Hiya and welcome to SevenForums!

Code:
BugCheck A, {fffffa80107d8010, 2, 1, fffff8000317f0b6}

Probably caused by : memory_corruption ( nt!MiReleaseConfirmedPageFileSpace+86 )

Followup: MachineOwner

Code:
BugCheck 19, {22, 20000, 0, 0}

GetPointerFromAddress: unable to read from fffff800032fb100
GetUlongFromAddress: unable to read from fffff80003268a38
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+72c6 )

Followup: MachineOwner

Code:
BugCheck 1000007E, {ffffffffc0000005, fffff8000335a421, fffff88002fdaa18, fffff88002fda270}

Probably caused by : ntkrnlmp.exe ( nt!CmpDelayDerefKCBWorker+81 )

Followup: MachineOwner
Hmm, run MemTest86+, sfc /scannow and chkdsk /r.
Install the latest updates from Windows Update.

Do the exact same steps for chkdsk /r but instead of typing in sfc /scannow type chkdsk /r.
SFC /SCANNOW Command - System File Checker
RAM - Test with Memtest86+

http://www.sevenforums.com/bsod-help-support/373012-bsods-overnight-mainly-ntoskrnl-exe.html
Relevancy 53.32%

I am getting constant BSODs at random times. ntoskrnl is what I have seen listed repeatedly in crash dumps, but I can't figure out what it is or how to fix it. Here is the zip file.

A:BSODs involving ntoskrnl

Hi penny76.

Though there are multiple bugcheck codes blaming memory corruption, a deeper search gives a hint of antivirus caused network blockage as the cause of the BSOD.

Uninstall Avast using Avast Uninstall Utility. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.

Download, install and update those, and then run full system scans with both of them, one by one.

Let us know the results.

Code:
fffff880`09843aa8 fffff880`040f58bbUnable to load image \SystemRoot\system32\drivers\aswSnx.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for aswSnx.sys
*** ERROR: Module load completed but symbols could not be loaded for aswSnx.sys
aswSnx+0x308bb

Code:
BugCheck D1, {fffffa805665d604, 2, 1, fffff8800165c3b8}

Probably caused by : memory_corruption

Followup: memory_corruption
---------

Code:
BugCheck A, {fffffa7fcfef020f, 2, 0, fffff8000305747c}

Probably caused by : memory_corruption

Followup: memory_corruption
---------

http://www.sevenforums.com/bsod-help-support/348371-bsods-involving-ntoskrnl.html
Relevancy 53.32%

So I built my first computer back in July, and when I went to play a game, about 15 minutes it, it crashed. So I tried it again, crash. This has now become an ongoing thing, where whenever i play a game, a few minutes in, it or my computer will crash/BSOD. Then about a week ago it began crashing with just things like photoshop. I've asked this on many forums and the main consensus I got was that it was a memory issue. Today, I ran Memtest86 and Windows Memory Diagnostic and it said that there were no errors. What else could be causing this?
 
Parts: http://secure.newegg.com/WishList/PublicWishDetail.aspx?WishListNumber=17361254
BSODs: http://gyazo.com/47745b65a714858352e550114c6310c2.png
Memtest Results: http://i.imgur.com/QVjMVHu.jpg
 

A:Multiple 'ntoskrnl.exe' BSODs

Please download MiniToolBox  , save it to your desktop and run it.
 
Checkmark the following checkboxes:
  List last 10 Event Viewer log
  List Installed Programs
  List Users, Partitions and Memory size.
 
Click Go and paste the content into your next post.
 
Also...please Publish a Snapshot using Speccy - http://www.bleepingcomputer.com/forums/topic323892.html/page__p__1797792#entry1797792 , taking care to post the link of the snapshot in your next post.
 
Louis

http://www.bleepingcomputer.com/forums/t/508540/multiple-ntoskrnlexe-bsods/
Relevancy 53.32%

Hey

For a few days ive been getting blue screens pretty much everytime i start to play something or watch movies. Ive had this problem before but then it just suddently pretty much fixed itself. Doesnt usually happen while just browsing internet.
Would appreciate if someone could check the logs,

A:Win 7 x64, Random BSODs, ntoskrnl.exe mostly

Ran memtest and found some errors on 2 diff sticks, third stick passed. Pc was working fine for several hours but then got the "display driver has stopped responding..." error twice and bsod soon after that. Updated some drivers and installed all windows updates. Updated SF log,

http://www.sevenforums.com/bsod-help-support/338865-win-7-x64-random-bsods-ntoskrnl-exe-mostly.html
Relevancy 53.32%

Hey there, this my first time here. And sorry if BSOD of this type already have already been fixed.
These bsods started appearing out of nowhere. I have no idea what is the cause. They usually appear when I am playing games or watching youtube videos. But they appear when the PC is idle too.
I have attached the dm log collector files. I hope you will help me fix this problem.
Thanks.

http://www.tenforums.com/bsod-crashes-debugging/45166-random-bsods-ntoskrnl-exe.html
Relevancy 53.32%

Hi there I've recently built a new computer and everything seemed to be working fine up until a few weeks ago when I got a BSOD - okay no biggie I'll look it up and oh a different BSOD This was the beginning Since then I can't seem to use my computer for long periods or play games intensive - ntoskrnl.exe fault at BSODs to seems be Various and not intensive doesn't seem to Various BSODs - ntoskrnl.exe seems to be at fault matter which I Various BSODs - ntoskrnl.exe seems to be at fault tried to see if it was my graphics card so I ran Furmark and OCCT both of which said it's absolutely fine but I did a clean install of my AMD drivers just in case unfortunately this didn't solve the problem I also stressed the CPU and PSU using OCCT which also returned negative I then decided to use MemTest and left that running for passes overnight and again no negatives Frustrated I decided to get a BSOD dump viewer quot Blue Screen View quot which showed me that every single BSOD had been related to the ntoskrnl exe ntoskrnl exe I tried using driver verifier both on 'all drivers' and specifically on this ntoskrnl exe but apart from giving me Driver Violation Detected BSODs it didn't seem to help me much at all because I'd no idea how to chase up the results Here's a list of BSODs I can remember getting since the issue started Page fault in non-paged areaIRQL not less or equalMemory managementBad pool headerSpecial pool detected memory corruptionDriver verifier detected violation I'm really running short on ideas here as I've no idea how to proceed in tracking down the problem And so I turn to you guys for help - please find attached the dump zip as requested in the sticky And please let me know if there is any more information I can provide that would help you in helping me Thanks in advance

A:Various BSODs - ntoskrnl.exe seems to be at fault

Hi courageouscoos,

Welcome to the 10forums.

Have you checked the memory compatibility of your mainboard?
It doesn't look like the module is supported by your mainboard.
ASRock > H170M-ITX/ac

Code:
[Physical Memory Array (Type 16) - Length 23 - Handle 000eh]
Location 03h - SystemBoard/Motherboard
Use 03h - System Memory
Memory Error Correction 03h - None
Maximum Capacity 33554432KB
Memory Error Inf Handle [Not Provided]
Number of Memory Devices 2
[Memory Device (Type 17) - Length 40 - Handle 000fh]
Physical Memory Array Handle 000eh
Memory Error Info Handle [Not Provided]
Total Width 64 bits
Data Width 64 bits
Size 8192MB
Form Factor 09h - DIMM
Device Set [None]
Device Locator ChannelA-DIMM0
Bank Locator BANK 0
Memory Type 1ah - Specification Reserved
Type Detail 0080h - Synchronous
Speed 2133MHz
Manufacturer Kingston
Serial Number
Asset Tag Number
Part Number 9905625-029.A00G

http://www.tenforums.com/bsod-crashes-debugging/36122-various-bsods-ntoskrnl-exe-seems-fault.html
Relevancy 53.32%

I built a new computer about a month ago keeping the same hard drives case and DVD drive At first it wouldn t even start up but now it s just at the point where I get about blue screens per day Sometimes it s when I m in a game or Firefox but sometimes it s immediately after startup just on the desktop The most common are e and atikmdag sys atikmpag sys Ususally the screen has graphical corruption just before the BSoD I tried uninstalling Catalyst Control Center and reseating the GPU but it didn t help I tried getting Debugging Tools for Windows x but I really don t know what the information it provides means I ve attached all the mindumps from today I ran Windows Memory Diagnostic for passes on Extended and it showed no errors until I cancelled it at which point it said Windows failed to start 1e, BSoDs atikmdag, ntoskrnl and recommened Startup Repair When I logged in it gave an error message saying an ordinal could not be found Windows -bit SP AMD Phenom II X CPU GB DDR RAM ATI Radeon HD updated to W PSU MSI -G motherboard nbsp

A:BSoDs 1e, atikmdag, ntoskrnl

Here is the exact error that showed on startup after I ran the memory diagnostic:

regsvr32.exe - Ordinal Not Found
The ordinal 344 could not be located in the dynamic link library COMCTL32.dll.
 

https://forums.techguy.org/threads/bsods-1e-atikmdag-ntoskrnl.994151/
Relevancy 53.32%

Hi!

For some time now I had this problem where PC bsods in random times, doing something or being idle..
Error codes are:
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
SYSTEM_SERVICE_EXCEPTION
MEMORY_MANAGEMENT
KMODE_EXCEPTION_NOT_HANDLED
PFN_LIST_CORRUPT
KMODE_EXCEPTION_NOT_HANDLED

When looking with Nirsofts Bluescreenviewer they are all coming from ntoskrnl.exe

I did two passes with memtest86+ and no errors was found.
I had some problems with my secondary HDD having some bad sectors, but I fixed those (I think) when I was clean installing new system few months ago. Could HDD be causing this problem? Widows and more important programs are installed on a new SSD, HDD used almost only for storage, games and stuff not used all the time..

Please help me solve this problem!

Thanks!

A:ntoskrnl.exe random bsods

Update drivers highlighted in red, MS AHCI Storport Miniport Driver and Samsung RAPID Mode Disk Filter driver

Code:
LGVirHid.sys Tue Nov 24 02:36:48 2009 (4B0B38B0)
Logitech Gamepanel Virtual HID Device Driver
http://www.carrona.org/drivers/driver.php?id=LGVirHid.sys

LGBusEnum.sys Tue Nov 24 02:36:48 2009 (4B0B38B0)
Logitech Keyboard
http://www.carrona.org/drivers/driver.php?id=LGBusEnum.sys

netr7364.sys Tue Oct 4 08:14:37 2011 (4E8AA44D)
Ralink RT2501/RT2573/T2601/RT2671 Wireless Adapter (you may have a different manufacturer)
http://www.carrona.org/drivers/driver.php?id=netr7364.sys

k57nd60a.sys Wed Jan 30 01:48:55 2013 (51086DF7)
Broadcom NetLink Gigabit Ethernet NDIS6.x Unified Driver
http://www.carrona.org/drivers/driver.php?id=k57nd60a.sys

LGSHidFilt.Sys Thu May 30 17:16:33 2013 (51A76D51)
Logitech Gaming KMDF HID driver[br]KB or mouse
http://www.carrona.org/drivers/driver.php?id=LGSHidFilt.Sys

eamonm.sys Mon Jul 8 14:34:13 2013 (51DAB1C5)
ESET Amon driver
http://www.carrona.org/drivers/driver.php?id=eamonm.sys

edevmon.sys Mon Jul 8 14:34:14 2013 (51DAB1C6)
ESET Smart Security Devmon Monitor driver
http://www.carrona.org/drivers/driver.php?id=edevmon.sys

ehdrv.sys Mon Jul 8 14:34:32 2013 (51DAB1D8)
ESET
http://www.carrona.org/drivers/driver.php?id=ehdrv.sys

EpfwLWF.sys Mon Jul 8 14:35:35 2013 (51DAB217)
ESET ESS/NOD32 driver
http://www.carrona.org/drivers/driver.php?id=EpfwLWF.sys

epfwwfp.sys Mon Jul 8 14:35:36 2013 (51DAB218)
ESET Personal Firewall Driver
http://www.carrona.org/drivers/driver.php?id=epfwwfp.sys

epfw.sys Mon Jul 8 14:35:43 2013 (51DAB21F)
ESET
http://www.carrona.org/drivers/driver.php?id=epfw.sys

dump_storahci.sys Thu Aug 22 13:40:39 2013 (5215F8B7)
driver created to provide disk access during crash dump file generation
http://www.carrona.org/drivers/driver.php?id=dump_storahci.sys

AODDriver2.sys Tue Feb 11 12:06:52 2014 (52FA044C)
AMD Overdrive; also in EasyTune6 for Gigabyte motherboard [br] Known BSOD issues in Win7[br][br]Part of AMD Fuel[br][br]Location: C:\Program Files\ATI Technologies\ATI.ACE\Fuel\amd64\AODDriver2.sys
http://www.carrona.org/drivers/driver.php?id=AODDriver2.sys

AMDACPKSL.SYS Wed Mar 12 00:49:44 2014 (531FA118)
included in the AMD/ATI Catalyst WDM drivers package
http://www.carrona.org/drivers/driver.php?id=AMDACPKSL.SYS

AtihdWB6.sys Wed Mar 12 00:50:02 2014 (531FA12A)
AMD High Definition Audio Function Driver
http://www.carrona.org/drivers/driver.php?id=AtihdWB6.sys

atikmpag.sys Fri Apr 18 03:07:07 2014 (53507ABB)
ATI Video driver (remove the Catalyst Control Center and only install the Display Driver)
http://www.carrona.org/drivers/driver.php?id=atikmpag.sys

atikmdag.sys Fri Apr 18 04:13:16 2014 (53508A3C)
ATI Video driver (remove the Catalyst Control Center and only install the Display Driver)
http://www.carrona.org/drivers/driver.php?id=atikmdag.sys

em006_64.dat Wed May 14 11:19:40 2014 (5373352C)
ESET Smart Security
http://www.carrona.org/drivers/driver.php?id=em006_64.dat

SamsungRapidDiskFltr.sys Mon May 19 16:24:16 2014 (537A1410)
Samsung RAPID Mode Disk Filter driver
http://www.carrona.org/drivers/driver.php?id=SamsungRapidDiskFltr.sys

SamsungRapidFSFltr.sys Mon May 19 16:24:18 2014 (537A1412)
Samsung RAPID Mode File Filter driver
http://www.carrona.org/drivers/driver.php?id=SamsungRapidFSFltr.sys

SCDEmu.SYS Fri Jun 27 07:14:20 2014 (53ACFDAC)

SCDEmu.SYS - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

em018_64.dat Mon Sep 29 15:24:22 2014 (54295D86)
ESET Smart Security
http://www.carrona.org/drivers/driver.php?id=em018_64.dat

em008_64.dat Mon Oct 6 16:15:50 2014 (5432A416)
ESET Smart Security
http://www.carrona.org/drivers/driver.php?id=em008_64.dat

Debug session time: Sat Nov 15 17:37:57.453 2014 (UTC + 1:00)
Loading Dump File [C:\Users\Mihael\Sysnati... Read more

http://www.eightforums.com/bsod-crashes-debugging/57137-ntoskrnl-exe-random-bsods.html
Relevancy 53.32%

I have been receiving BSODs at unexplainable times when using my computer.

I have seen all three of my recent BSODs at NTosKrnl.exe+57150, however, one of them is a MEMORY_MANAGEMENT and the other two are SYSTEM_SERVICE_EXCEPTION. As I cannot easily reproduce these BSODs, I would like help to figure out what to do next.

Sometimes, it occurs during the word processor. It can also happen with viewing videos or playing video games.

I am currently a newbie at the forums, so please assist me with what I should do next.
I am reasonably experienced with computers myself, comfortable with the usage of hex editors, RegEdit, MSConfig, or other system tools, so feel free to suggest them as long as you have adequate experience with these tools.

A:BSODs at NTosKrnl.exe+57150

Welcome
We can offer the best help if we have the information from this upload
Blue Screen of Death (BSOD) Posting Instructions

http://www.vistax64.com/general-discussion/300305-bsods-ntoskrnl-exe-57150-a.html
Relevancy 53.32%

I have been getting bsods since this computer was built I fix them for awhile and they keep coming back. they seem to be related to ntoskrnl this time I have run memtest several times with no errors. here are my latest minidumps

A:bsods related to ntoskrnl

Your zip files contains only the crash file, the other information will help us to find the problem.

Go to this link and post all of the files requested:
Blue Screen of Death (BSOD) Posting Instructions

Your last two crashes are labeled STOP 0x0000001E: KMODE_EXCEPTION_NOT_HANDLED.
This is a very common bug check, the other requested files/info will help to find the cause.
Usual causes: Device driver, hardware, System service, compatibility, Remote control programs, memory, BIOS
This indicates that a kernel-mode program generated an exception which the error handler did not catch.
This can be caused by just about anything, as mentioned, we need more information.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

KMODE_EXCEPTION_NOT_HANDLED (1e)
This is a very common bugcheck. Usually the exception address pinpoints
the driver/function that caused the problem. Always note this address
as well as the link date of the driver/image that contains this address.
Arguments:
Arg1: 0000000000000000, The exception code that was not handled
Arg2: 0000000000000000, The address that the exception occurred at
Arg3: 0000000000000000, Parameter 0 of the exception
Arg4: 0000000000000000, Parameter 1 of the exception

Debugging Details:
------------------


EXCEPTION_CODE: (Win32) 0 (0) - The operation completed successfully.

FAULTING_IP:
+3762306232393830
00000000`00000000 ?? ???

EXCEPTION_PARAMETER1: 0000000000000000

EXCEPTION_PARAMETER2: 0000000000000000

ERROR_CODE: (NTSTATUS) 0 - STATUS_WAIT_0

BUGCHECK_STR: 0x1E_0

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

PROCESS_NAME: System

CURRENT_IRQL: 2

EXCEPTION_RECORD: fffff880031ae158 -- (.exr 0xfffff880031ae158)
ExceptionAddress: fffff8800178dfcf (tcpip+0x00000000000b8fcf)
ExceptionCode: c0000005 (Access violation)
ExceptionFlags: 00000000
NumberParameters: 2
Parameter[0]: 0000000000000000
Parameter[1]: ffffffffffffffff
Attempt to read from address ffffffffffffffff

TRAP_FRAME: fffff880031ae200 -- (.trap 0xfffff880031ae200)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0002000000000000 rbx=0000000000000000 rcx=fffffa800650ae40
rdx=0000000000000000 rsi=0000000000000000 rdi=0000000000000000
rip=fffff8800178dfcf rsp=fffff880031ae390 rbp=0000000000000007
r8=0000000000000000 r9=000000000166be5b r10=fffffa800650ae40
r11=fffff880031ae468 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei pl nz na po nc
tcpip+0xb8fcf:
fffff880`0178dfcf 488b48d0 mov rcx,qword ptr [rax-30h] ds:0004:0001ffff`ffffffd0=????????????????
Resetting default scope

LAST_CONTROL_TRANSFER: from fffff80002ec55fe to fffff80002ecdc10

STACK_TEXT:
fffff880`031ad238 fffff800`02ec55fe : fffffa80`06e0f501 fffffa80`06df5850 fffff880`031ad9b0 fffff800`02ef9830 : nt!KeBugCheck
fffff880`031ad240 fffff800`02ef94fd : fffff800`030d771c fffff800`03014c30 fffff800`02e51000 fffff880`031ae158 : nt!KiKernelCalloutExceptionHandler+0xe
fffff880`031ad270 fffff800`02ef82d5 : fffff800`030180fc fffff880`031ad2e8 fffff880`031ae158 fffff800`02e51000 : nt!RtlpExecuteHandlerForException+0xd
fffff880`031ad2a0 fffff800`02f09361 : fffff880`031ae158 fffff880`031ad9b0 fffff880`00000000 fffffa80`0650a000 : nt!RtlDispatchException+0x415
fffff880`031ad980 fffff800`02ecd2c2 : fffff880`031ae158 00000000`00000000 fffff880`031ae200 00000000`00000e00 : nt!KiDispatchException+0x135
fffff880`031ae020 fffff800`02ecbbca : 00000000`00000000 fff... Read more

http://www.sevenforums.com/bsod-help-support/205625-bsods-related-ntoskrnl.html
Relevancy 53.32%

Hi All, my name is Mariano, from Argentina (and sorry for my English :-D)
I need your help on these BSODs

My configuration is Win7 Ultimate x64 SP1 and last Windows updates.
reinstalled repeatedly. With another video card and others RAM memories and another

* Processor AMD Athlon II X4 640
* Mainboard Model ASUS M4N68T-M LE
* 8gb RAM (2x4 gb)
* 2tb HDD
* Video Card NVIDIA GeForce GT 520

I have random BSODs, (ATTACHED BLUESCREENVIEW REPORT)

Also I attached report with CPU-Z for hardware configuration, and minidump in a zip file

even just having the computer turned on. I updated drivers. Please, could you help me? I cannot continue with this problem!!

Thanks!!

A:Several BSODs, various errors ntoskrnl.exe HELP!

Please provide all the files following this tutorial so we can provide a complete analysis: Blue Screen of Death Posting Instructions

http://www.sevenforums.com/bsod-help-support/303819-several-bsods-various-errors-ntoskrnl-exe-help.html
Relevancy 53.32%

I built my computer in mid September Windows x At the end of October it had its first bsod and since then ntoskrnl.exe Multiple BSODs it has crashed around once Multiple BSODs ntoskrnl.exe a week Sometimes the BSOD crash occurs after I've plugged in or unplugged a usb device or during an attempted shutdown and once I got a BSOD while Multiple BSODs ntoskrnl.exe watching a video After each crash the Multiple BSODs ntoskrnl.exe minidump puts different drivers at fault but one that is recurring is ntoskrnl exe At one point I thought avast might have been causing problems so I uninstalled it but after a few days the computer blue screened again Looking at posts from people with similar issues it seems like I might have a hardware issue of some sort on my hands How can I figure out where the issue really is and whether it is a software or hardware issue Please let me know what other info logs I should provide about my issue Thanks for the help

A:Multiple BSODs ntoskrnl.exe

to the forum mate.
 
Please follow the below steps.
 
Upload the actual crash dump files.
 
You will find the crash dump files inside C:\Windows\Minidump folder. To copy the dumps, disable "User Account Control" first. Otherwise you may receive a permission error. After disabling UAC, copy and zip most recent three or more dumps to a single file. Either attach the zip with next reply using "More reply options --> Attach files" or use a free file hosting site. 
 
For example -> http://www.mediafire.com/
 
Publish a snapshot of your system using Speccy.
 
"Speccy" is a free tool which can list the hardware specs, temperature status, installed Windows updates, HDD SMART info etc of your system. Please read the below tutorial to know how to use "Speccy" to collect system info.
 
http://www.bleepingcomputer.com/forums/t/323892/publish-a-snapshot-using-speccy/
 
Don't paste the output displayed by "Speccy" here. Instead paste the web link it displays.
 
Minitoolbox log.
 
"Minitoolbox" can list all the installed programs as well as event log errors in your system. Download "Minitoolbox" from the below link.
 
http://www.bleepingcomputer.com/download/minitoolbox/
 
 Run the tool and only select the following tick boxes.
 
 
List last 10 Event viewer errors
List installed program
List users, partition and memory size
List Minidumps
 
Now click "Go" and post the output displayed in next reply.

http://www.bleepingcomputer.com/forums/t/514204/multiple-bsods-ntoskrnlexe/
Relevancy 53.32%

My friend has a Desktop PC that has some random BSODs and I decide to help him.
Started on January and getting worse last month.
After the forth BSOD I tried to find out the problem but it seems the problem not really exact. (Run WinDbg, got different results)
Then I reinstalled motherboard, video card, wlan and the lan drivers. Run chkdsk and system file checker (src /scannow), found nothing. Checked the SSD firmware, up to date.
Run stress test on the CPU and the GPU, there weren't overheating (at that time).
Tested the RAMs using memtest86+ overnight, passed 5 times, no errors.
Run Driver Verifier for 17 hours, no BSOD. After deleted the existing settings, restarting the windows caused BSOD (5th).
Uninstalled Gigabyte Dynamic Energy Saver and manually disabled the gdrv.sys using Autoruns. But this seems only the last BSOD (or not).

I was wondering if somebody could help.
Thank you in advance.

A:Random different BSODs, ntoskrnl.exe

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck C1, {fffff9807ec22ff0, fffff9807ec22ffc, 7d000c, 24}

Unable to load image \??\C:\Windows\gdrv.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for gdrv.sys
*** ERROR: Module load completed but symbols could not be loaded for gdrv.sys
Probably caused by : gdrv.sys ( gdrv+30c7 )

Followup: MachineOwner
---------

Code:
Loaded symbol image file: gdrv.sys
Image path: \??\C:\Windows\gdrv.sys
Image name: gdrv.sys
Timestamp: Fri Mar 13 10:22:29 2009 (49B9D175) 2009 (49B9D175)
the driver's very old...should update those
GIGABYTE
EDIT:
if you are planniing to uninstall that anyway, just uninstall it as it's one of the cause of BSOD...


Code:
Start Menu\Programs\Norton Internet Security Public:Start Menu\Programs\Norton Internet Security Public
also, it's recommended that you uninstall Norton and use MSE instead

Antivirus Uninstaller
Microsoft Security Essentials | Protect against viruses, spyware, and other malware

run chkdisk /f /r to search for drive corruption, and sfc /scannow to scan for corrupted windows system file
Cheers

http://www.sevenforums.com/bsod-help-support/289447-random-different-bsods-ntoskrnl-exe.html
Relevancy 53.32%

Hello everyone I have been running this problem down now for some time and it seems to be getting worse I will BSOD randomly typically while gaming though it does happen sometimes while just web browsing or watching Netflix I have tried running with my overclocks turned back to stock and ntoskrnl.exe, mostly gaming. with BSODs during have been tested stable for a long time now I have updated many drivers from BSODs with ntoskrnl.exe, mostly during gaming. USB to my Display drivers including a roll back on the display drivers I have done a few re-formats and re-install of windows as well I did previously think I would not have a problem until Windows update had finished installing it's many updates after both re-formats but that may have been in my head I have ran Memtest on my ram and it has all checked out good but I have not eliminated the possibility of having corrupted memory in my GPUs I haven't been able to try an upgrade repair install with my win disk yet as it says my current OS is newer then the one I am quot upgrading quot to and won't let me complete it Between the multiple instances of ntoskrnl exe in my crash reports I was hoping it was a software issue but the many usb sys callouts have me leaning towards hardware more than likely my MOBO with will only be in warranty for a couple more months Short of the long is I thought I would post my issue and reports up here with the SF Diag and see if any of you can spot something I may have missed in my frustration and impatience Thank you for looking -Jon Edit I should also note that this does not just occur during gaming but has also happened while the computer is sitting idle Also it tends to happen more often with more advanced games such as BF and StarCraft Arma and Sim City to some extent and a lot less with Warthunder but still once and awhile I have gotten used to having a BSOD every once and awhile due to a known bios issue with my cards that I found out about long after I bought them but that was usually very far between and quite random and ONLY during games especially BF Until recently as in the last month my system has been rock solid stable otherwise

A:BSODs with ntoskrnl.exe, mostly during gaming.

Are you overclocking?

Code:
Processor Version AMD Phenom(tm) II X6 1090T Processor
Processor Voltage 89h - 0.9V
External Clock 200MHz
Max Speed 3200MHz
Current Speed 4000MHz
As you are getting BSODs, you should stop overclocking and run all the hardware components like CPU, GPU and RAM to their default settings. Also set the BIOS to default, too.
How To Clear CMOS (Reset BIOS)

The display driver is failing here.

Code:
fffff880`02744038 fffff880`0434f345Unable to load image \SystemRoot\system32\DRIVERS\atikmpag.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for atikmpag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmpag.sys
atikmpag+0x6345
And the driver is old.

Code:
fffff880`04349000 fffff880`043aa000 atikmpag T (no symbols)
Loaded symbol image file: atikmpag.sys
Image path: \SystemRoot\system32\DRIVERS\atikmpag.sys
Image name: atikmpag.sys
Timestamp: Sat Jul 28 06:44:47 2012 (50133D07)
CheckSum: 00064351
ImageSize: 00061000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Update your ATI/AMD display driver to the latest WHQL.
You can get it from the link in our forum, Latest AMD Catalyst Video Driver for Windows 7, or you may go to AMD Graphics Driver and Software and opt for Automatically Detect and Install the appropriate driver for your card.


During installation, you may opt for advanced installation, and install the display driver only, not the Catalyst Control Center.

Your motherboard is Gigabyte GA-890FXA-UD5 ... can you tell us the version of the board? It is necessary to know.

Check if the Power Supply Unit (PSU) supplying adequate power to the computer or not.
eXtreme Power Supply Calculator
Also let us know the wattage of the PSU.

Is the computer running hot? Let us know. Upload a snapshot Using Speccy.
Download and install Speccy.
File> Save snapshot.
Save it on desktop.
Zip it and upload it following following Screenshots and Files - Upload and Post in Seven Forums .
Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

Let us know the results.
________________________________________________________________________
BSOD ANALYSIS:

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 3B, {c0000005, fffff800036d1e94, fffff88002743c40, 0}

Probably caused by : ntkrnlmp.exe ( nt!SwapContext_PatchXRstor+0 )

Followup: MachineOwner
---------

1: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff800036d1e94, Address of the instruction which caused the bugcheck
Arg3: fffff88002743c40, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.

Debugging Details:
------------------
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

FAULTING_IP:
nt!SwapContext_PatchXRsto... Read more

http://www.sevenforums.com/bsod-help-support/304392-bsods-ntoskrnl-exe-mostly-during-gaming.html
Relevancy 53.32%

Hi all I've been getting lots of BSOD's on a computer I built this past summer I am home again for break and thought I had diagnosed the issue after memtest gave tons of errors So I replaced the memory I ran memtest and prime hrs and the system seemed to be fine However I am still having intermittent BSODs Yesterday I got the IRQL NOT LESS OR EQUAL error I googled that error and turned on driver verifier Upon reboot the computer BSOD and I did several things such as uninstall BSODs ntoskrnl.exe and iusb3xhc.sys Glary Utilities Deamon Tools and Avast The computer now booted but still BSOD iusb3xhc.sys and ntoskrnl.exe BSODs with an error in quot iusb xhc sys quot I updated the drivers for all my usb devices and then tried to see if I could eliminate BSODs I also removed the driver verifier because it was slowing down my computer immensely - I have a USB keyboard mouse and webcam and they seem fine Ran for several hours without issue - Next I reconnected my usb wireless adapter Realtek RTL SU based It was previously connected to a usb port I connected it to a usb port Again ran for several hours and it was fine - Overnight I ran sfc scannow and chkdsk on reboot No errors found - I reconnected my WD Elements USB harddrive Within a few hours this led to another BSOD with the error IRQL NOT LESS OR EQUAL - Updated the Intel usb driver Did verifier again and still getting BSOD with iusb xhc as cause Any ideas if its the harddrive or something else that is causing the issue I'm honestly lost as to how to troubleshoot Thanks in advance

A:iusb3xhc.sys and ntoskrnl.exe BSODs

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1000007E, {ffffffffc0000005, fffff88004b89b53, fffff8800338b6f8, fffff8800338af50}

Probably caused by : iusb3xhc.sys ( iusb3xhc+64b53 )

Followup: MachineOwner
---------

2: kd> lmvm iusb3xhc
start end module name
fffff880`04b25000 fffff880`04bec000 iusb3xhc T (no symbols)
Loaded symbol image file: iusb3xhc.sys
Image path: \SystemRoot\system32\DRIVERS\iusb3xhc.sys
Image name: iusb3xhc.sys
Timestamp: Thu Oct 30 20:35:19 2014 (54520D5F)
CheckSum: 000CB888
ImageSize: 000C7000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Did you run the Intel Driver Update Utility?
Intelฎ Driver Update Utility

Does the BSOD only occur when you plug that WD drive into that port? What about other devices? Do they cause the same BSOD?

http://www.sevenforums.com/bsod-help-support/356888-iusb3xhc-sys-ntoskrnl-exe-bsods.html
Relevancy 53.32%

Using bluescreen view, i know the bsod was cause by ntoskrnl.exe driver. What can i do to repair or update it?
Will appreciate any help.

A:BSODs cause by ntoskrnl.exe driver

There are different bugchecks.

The latest BSODs are pointing to Avast.

Code:
BugCheck C1, {fffff9803e944f10, fffff9803e944119, b340f8, 32}

*** WARNING: Unable to verify timestamp for aswStm.sys
*** ERROR: Module load completed but symbols could not be loaded for aswStm.sys
Probably caused by : aswStm.sys ( aswStm+4877 )

Followup: MachineOwner
---------
Uninstall Avast using Avast Uninstall Utility. At least as a test. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.

Last week, DS3 controllers caused BSODs there.

Code:
BugCheck 10D, {5, 0, 1202, fffffa800d00ec40}

*** WARNING: Unable to verify timestamp for MijXfilt.sys
*** ERROR: Module load completed but symbols could not be loaded for MijXfilt.sys
Probably caused by : MijXfilt.sys ( MijXfilt+363a )

Followup: MachineOwner
---------
And it is the known issue for the latest driver, Version 0.7.1001.

Code:
Image name: MijXfilt.sys
Timestamp: Sat May 12 09:57:12 2012 (4FADE6A0)
You need to get any other previous driver version to solve this particular issue, but unfortunately I dont know any source of it. One source was known to me, Playstation 3 controller(Dualshcok 3 or Sixaxis) driver for windows | MotioninJoy which does not work nowadays. You should search for any other alternative source.

Moreover, as there are multiple different bugchecks, it would be the best to test the health of the RAM modules. Test your RAM modules for possible errors. How to Test and Diagnose RAM Issues with Memtest86+
Run memtest86+ for at least 8 consecutive passes.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Let us know the results.

http://www.sevenforums.com/bsod-help-support/371817-bsods-cause-ntoskrnl-exe-driver.html
Relevancy 53.32%

I bought new hardware for a new pc (six months ago) and for a time, it was good. Acutally performance is still good but, i'm having some problems with software i guess. I keep having bsods while playing a game, or during doing nothing. I can't be sure what the problem is. I'm uploading my dump files in a zip. I hope you can help me. I've just did a clean install win7, before this, again on win7 i keep having the same or similar bsods (ntoskrnl.exe), and now they're still there.

I hope we can find the problem and fix it. Thanks beforehand.

A:[SOLVED] BSODs (ntoskrnl.exe probably)

Recommendations:Please remove Daemon Tools and disable Verifier to test. Daemon Tools has had known problems with Windows 7 in the past and may be a contributing factor in your crashes.


To disable Verifier: Start Menu -> All Programs -> Accessories -> Right click Command Prompt -> Run as administrator -> Type the following command and then Enter:verifier /reset-> Restart your computer.


Also, your crashes may be memory related.Run the boot version of Memtest86+. Let it run for at least 7-10 passes (preferably more) or until errors show up.If you see even one error, stop the test and do the following:

Quote:




Before you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. WARNING: The steps that follow can void your warranty!!!




Shut down and turn off your computer.
Unplug all power sources to the system: unplug the power from the outlet/surge protector or PSU (then remove the battery if it is a laptop).
Hold down the power button for 30 seconds (for your safety and the safety of the components) to close the circuit and drain all power from components.
Remove the casing (or remove the RAM panel if it is a laptop).
Remove all but one memory module making sure you are grounded while doing so.Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working. If you do not have an anti-static workbench, desk, or pad, you can use your computer tower/case by finding a metal hold in it, such as a drive bay.
Replace the casing (or replace the RAM panel if it is a laptop) and put the remaining memory module(s) in a safe, static free environment.
If the problem persists, repeat steps 1-4 and move the memory module to another slot (while staying grounded, of course).

Do this until all slots have been tested. If all slots fail, the memory module may be bad. Test with one of the remaining modules. Continue one module at a time in one slot at a time until you find a good module and good slot. Test remaining modules in the good slot, test good modules in other slots to find bad slots, etc. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. You may want to run both Memtest86+ and the Windows Memory Diagnostics Tool overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).

Let's check your memory compatibility with your system:Download and install CPU-Z and Upload screenshots of the CPU, Mainboard, Memory, and SPD tabs. In the SPD tab, upload an image of each slot. To upload all screenshots, it would be best to:generate the images using the Snipping Tool,
go to where the images are saved,
right click in a blank area within the folder where the images are saved,
create a new folder,
name the folder CPUZ,
select all the images,
place the pointer over an image,
press and hold down the left mouse button and drag the image (all images should move with it),
drop the images into the CPUZ directory you created,
create a compressed (zipped) folder of CPUZ
upload the .zip file to the forums.


If You Continue to Have Crashes: Please follow the http://www.techsupportforum.com/foru...ta-452654.html to provide us with more information regarding your crashes.

3rd Party Drivers: The following is for information purposes only. My recommendations were given above. The drivers that follow belong to software or devices that were not ... Read more

http://www.techsupportforum.com/forums/f299/solved-bsods-ntoskrnl-exe-probably-665096.html
Relevancy 53.32%

Thanks for reading and trying to help ntoskrnl.exe BSODs Random me solve this issue I've had this problem since I first built this machine about years ago been getting random BSODs as the title suggests Sometimes I can go a week without any errors then I'll get one each day for days in a row About months ago after countless google Random BSODs ntoskrnl.exe searches for a solution I decided to just reformat my hard drive Alas this was no help As to the symptoms I USUALLY get one of these BSODs when gaming It has happened during all the games I play so I can't nail down only one as the culprit I play WoW battlefield apb reloaded and league of legends The crash address for every BSOD thus far is ntoskrnl exe cc I'm running Windows Home Premium bit OEM reinstalled Age of hardware is slightly over years age of OS install slightly over months I believe I've followed the BSOD posting instructions pretty well if you need any more info I'd be happy to provide it Thanks in advance

A:Random BSODs ntoskrnl.exe

All of these seem to be crashes of the directx subsystem or wake event failures from win32k.sys (timeout or synchronization object failures), all of which would indicate likely video card or driver trouble. Assuming you've tried multiple ATI driver versions with no success, have you considered this potentially a hardware fault (faulty video card) or a low power scenario (underpowered or failing PSU)?

http://www.sevenforums.com/bsod-help-support/195648-random-bsods-ntoskrnl-exe.html
Relevancy 53.32%

About 2 months ago I uploaded a thread which fixed my BSOD problems. 2 months later however I'm now getting more.
These happen at random times not when I'm doing anything specific.

LEE-PC-12_05_2015_160328_67.zip

A:BSODs ntoskrnl.exe 0x0000003b

Hi Leemur & Welcome back! ^_^,

Really sorry for the delay. Sadly, there are not many analysts
Do you still need help with this problem? If yes, then kindly reply to this thread and I will be notified via email and reply within 48 hours.

-Pranav

http://www.eightforums.com/bsod-crashes-debugging/65770-bsods-ntoskrnl-exe-0x0000003b.html
Relevancy 53.32%

According to BlueScreenView, ntoskrnl.exe is the responsible one - I get bluescreens, no matter if it's safe mode or not. I'm unable to obtain full SysNative app raport - it gets stuck at "Waiting for system info". I zip what I have.
Best regards,
Hoothoot

A:BSODs caused by ntoskrnl.exe

Take a look, if you want - it is what BlueScreenView tells.

http://www.bleepingcomputer.com/forums/t/614032/bsods-caused-by-ntoskrnlexe/
Relevancy 53.32%

I am running Windows Pro -bit it is from the Microsoft Action Pack partnership Intermittent NTOSKRNL.sys BSODs so I think it's classified as OEM but not sure System is approx years old NTOSKRNL.sys Intermittent BSODs except for the GFX card and nd HDD see hardware on my profile if necessary which are newer However the current OS install is less than months old I had a different install of Win bit RC before that I've had these bluescreens intermittently since install I imagine you can see the dates on the bluescreens in the data attached In my previous Win install and the -bit Vista before that I had bluescreen problems but they stopped mid way through my use NTOSKRNL.sys Intermittent BSODs of the Win RC Personally I don't think the Vista bluescreens were the same cause although I'm not totally sure about the RC ones Most of these bluescreens are quot probably caused by quot ntoskrnl sys according to WinDbg I have tried reinstalling GFX drivers multiple times uninstalled from Add Remove Programs restart download install restart Haven't done a memtest don't think that's likely though due to the old OS being fine for a while Requested files according to the BSOD sticky are attached Did I miss any details Thanks ahead of time Edit Fail attachment is now uploaded

A:NTOSKRNL.sys Intermittent BSODs

I apologize if this is not allowed, but I am bumping as this thread as it has no responses and it is on page 3...

http://www.sevenforums.com/bsod-help-support/101876-ntoskrnl-sys-intermittent-bsods.html
Relevancy 53.32%

I've been having BSODs over the past few months that can either happen a few times a weeks or go for several months without a single one. In every case, ntoskrnl.exe is always the cause for it. It usually happens right before the desktop screen loads when the computer boots up, or a few seconds after I open Chrome.

I've run memtest+ and Seatools a few months ago without any problems on either end. Also, I don't think I've had a BSOD when doing anything graphically intensive before, so I think a faulty GPU can be ruled out. I'll appreciate any input on the problem, thanks.

A:Infrequent ntoskrnl.exe BSODs

Your ASMedia 106x SATA Host Controller Drive is causing issues.


Code:
fffff880`05eed000 fffff880`0440d0ccUnable to load image \SystemRoot\System32\Drivers\dump_asahci64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for dump_asahci64.sys
*** ERROR: Module load completed but symbols could not be loaded for dump_asahci64.sys
dump_asahci64+0x10cc
It's old and needs updating. Search for an updated version here.


Code:
1: kd> lmvm asahci64
start end module name
fffff880`010c0000 fffff880`010cf000 asahci64 (deferred)
Image path: \SystemRoot\system32\DRIVERS\asahci64.sys
Image name: asahci64.sys
Timestamp: Wed Sep 21 10:42:57 2011 (4E79B1A1)
CheckSum: 00010EE2
ImageSize: 0000F000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Uninstall these programs. Both come full of crapware, malware and little surprises. God knows what you're infected with after installing those.


Code:
Start Menu\Programs\Cheat Engine 6.3
Start Menu\Programs\1clickmoviedownloader.com

http://www.sevenforums.com/bsod-help-support/335590-infrequent-ntoskrnl-exe-bsods.html
Relevancy 52.46%

Hello all

I'm getting frequent BSODs at random. I tried to search for various solutions here and there (can't recall how many memtests I ran)...
Almost all of them seem ntoskrnl.exe-related (according to BlueScreenView).
And it's been like this for a long, long time...

Any help appreciated. Thanks.

Fab

http://www.tenforums.com/bsod-crashes-debugging/52428-ntoskrnl-exe-bsods-14d2e9-6b445.html
Relevancy 52.46%

I have been receiving random BSODs for a while now. WhoCrashed has given multiple causes including possibly my audio card driver. However i have tried changing this many time to different versions to no avail. I have 4 BSOD logs from recently and i was wondering if you could look at them and suggest what you think it may be. Im running 64bit windows 7.

A:Random BSODs caused by ntoskrnl.

Hello CA,

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arguments:
Arg1: fffffa7fd2856ac4, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff880053d463a, address which referenced memory

Debugging Details:
------------------
READ_ADDRESS: GetPointerFromAddress: unable to read from fffff800034c7100
GetUlongFromAddress: unable to read from fffff800034c71c0
fffffa7fd2856ac4

CURRENT_IRQL: 2

FAULTING_IP:
cmudaxp+1ce63a
fffff880`053d463a 448b89a4000000 mov r9d,dword ptr [rcx+0A4h]

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

BUGCHECK_STR: 0xD1

PROCESS_NAME: System

TAG_NOT_DEFINED_c000000f: FFFFF80004C2DFB0

TRAP_FRAME: fffff80004c27040 -- (.trap 0xfffff80004c27040)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=fffff80004c27288 rbx=0000000000000000 rcx=fffffa800a856a20
rdx=fffffa800c92e8d0 rsi=0000000000000000 rdi=0000000000000000
rip=fffff880053d463a rsp=fffff80004c271d0 rbp=0000000000000080
r8=0000000000000080 r9=0000000000000000 r10=fffff880053e16f0
r11=0000000000000022 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei ng nz na pe nc
cmudaxp+0x1ce63a:
fffff880`053d463a 448b89a4000000 mov r9d,dword ptr [rcx+0A4h] ds:fffffa80`0a856ac4=????????
Resetting default scope

LAST_CONTROL_TRANSFER: from fffff80003297569 to fffff80003297fc0

STACK_TEXT:
fffff800`04c26ef8 fffff800`03297569 : 00000000`0000000a fffffa7f`d2856ac4 00000000`00000002 00000000`00000000 : nt!KeBugCheckEx
fffff800`04c26f00 fffff800`032961e0 : 00000000`00000000 00000000`00000000 fffffa80`0afcc700 00000000`00000000 : nt!KiBugCheckDispatch+0x69
fffff800`04c27040 fffff880`053d463a : fffffa80`06ec3030 fffffa80`0b5b20f8 00000000`00000000 fffffa80`0b5b2038 : nt!KiPageFault+0x260
fffff800`04c271d0 fffffa80`06ec3030 : fffffa80`0b5b20f8 00000000`00000000 fffffa80`0b5b2038 fffffa80`06ec3030 : cmudaxp+0x1ce63a
fffff800`04c271d8 fffffa80`0b5b20f8 : 00000000`00000000 fffffa80`0b5b2038 fffffa80`06ec3030 fffff880`0523f075 : 0xfffffa80`06ec3030
fffff800`04c271e0 00000000`00000000 : fffffa80`0b5b2038 fffffa80`06ec3030 fffff880`0523f075 00000000`00000000 : 0xfffffa80`0b5b20f8
STACK_COMMAND: kb

FOLLOWUP_IP:
cmudaxp+1ce63a
fffff880`053d463a 448b89a4000000 mov r9d,dword ptr [rcx+0A4h]

SYMBOL_STACK_INDEX: 3

SYMBOL_NAME: cmudaxp+1ce63a

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: cmudaxp

IMAGE_NAME: cmudaxp.sys

DEBUG_FLR_IMAGE_TIMESTAMP: 5062bcce

FAILURE_BUCKET_ID: X64_0xD1_cmudaxp+1ce63a

BUCKET_ID: X64_0xD1_cmudaxp+1ce63a

Followup: MachineOwner
---------

0: kd> lmvm cmudaxp
start end module name
fffff880`05206000 fffff880`05533000 cmudaxp T (no symbols)
Loaded symbol image file: cmudaxp.sys
Image path: \SystemRoot\system32\drivers\cmudaxp.sys
Image name: cmudaxp.sys
Timestamp: Wed Sep 26 13:59:02 2012 (5062BCCE)
CheckSum: 002A8DBE
ImageSize: 0032D000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Is is your Audio driver. Update it from the link provided in Driver Reference Table - cmudaxp.sys.


Code:
fffff880`092497e8 fffff880`03e62b95Unable to load image \SystemRoot\System32\Driver... Read more

http://www.sevenforums.com/bsod-help-support/269987-random-bsods-caused-ntoskrnl.html
Relevancy 52.46%

Hello everybody So I built BSODs, involving ntoskrnl.exe DRIVER_POWER_STATE_FAILURE, this system about a year and a half ago and I've had problems from day But recently my SSD broke down and I BSODs, DRIVER_POWER_STATE_FAILURE, involving ntoskrnl.exe had to install windows on my HDD I thought this would fix the problems but it hasn't I've tried all the things a moderately BSODs, DRIVER_POWER_STATE_FAILURE, involving ntoskrnl.exe computer savvy person can do So now I'm turning to you for help I've attached my files One problem worth mentioning is that the connection between the graphics card and monitor will give out every so often I've fixed the problem by unplugging the cord that runs between them for a few minutes and then plugging it back in If I plug in a new cord that will also fix the problem Other than that issue I'd just like to fix the BSsOD System Specs Processor Intel i k GHz Motherboard Gigabyte Z A-D H-B Memory Corsair GB DDR - GBx GPU MSI GeForce GTX Ti Twin FrozrII OC GB HD Western Digital TB EALX Blue SATA PSU Antec W HCG Current Gamer PS Appreciate all the help Attachment

A:BSODs, DRIVER_POWER_STATE_FAILURE, involving ntoskrnl.exe

Running the last 10 memory dumps.....

MSINFO32 shows issues with:
SAlpham64 - SteelSeries Engine HID Driver. Please uninstall that program, download a fresh copy and install it (if needed) - otherwise just uninstall it and see if that helps
EtronXHCI - your USB 3.0 drivers. Please uninstall them, download a fresh copy and then install it.

Gigabyte EasyTune6 (ET6) and Gigabyte EasySaver is known to cause BSOD's on Win7 systems. Please uninstall it. The drivers for these programs date from 2009, so it's best to get rid of them.

MSI Afterburner (along with Riva Tuner and EVGA Precision) are known to cause BSOD's on Win7 systems. Please uninstall it.

If overclocking, please stop while we're troubleshooting. Feel free to resume the overclock once the system is stable again.

Check inside the case to see if there's any issues with the cooling of the graphics card (dirt/dust/power plugs/fan not spinning/etc). Try another cable. Try another monitor. All of these will help to rule out problem components so you can identify the actual problem.

Running 10 memory dumps generated from 20 May to 10 June
4 different BSOD error codes cited
4 different causes blamed

This is most likely a hardware error. They (hardware errors) are usually caused by one of these things:
- borked (broken) hardware (several different procedures used to isolate the problem device)
- overclocking - You'll know if you're overclocking or not. If uncertain we can suggest things to check.
- compatibility issues
- low-level driver problems
- or even malware (scanned for when we ask for hardware diagnostics from Initial Hardware Diagnostics or Hardware Diagnostics ).

The most common issue in the memory dumps is USB problems - so I'd start by suspecting the USB 3.0 drivers. Please replace them immediately.

Applecharger.sys has recently been implicated in BSOD's on Win7 systems. Please uninstall it to see if it's the problem.

If this doesn't help the BSOD's, then start with the free hardware diagnostics here: Hardware Diagnostics

The following info is just FYI, I've already addressed the issues that I saw in the above paragraphs

- Further info on BSOD error messages available at: http://www.carrona.org/bsodindx.html
- Info on how to troubleshoot BSOD's (DRAFT): http://www.carrona.org/userbsod.html
- How I do it: http://www.carrona.org/howidoit.html

3RD PARTY DRIVERS PRESENT IN THE DUMP FILES
Code:

amdxata.sys Fri Mar 19 12:18:18 2010 (4BA3A3CA)
iaStor.sys Tue Apr 26 14:06:18 2011 (4DB7099A)
MpFilter.sys Fri Mar 09 06:05:26 2012 (4F59E3F6)
SteelBus64.sys Fri Sep 16 15:00:33 2011 (4E739CD1)
AppleCharger.sys Mon Jan 10 04:57:29 2011 (4D2AD809)
EtronXHCI.sys Fri Feb 25 12:51:52 2011 (4D67EC38)
HECIx64.sys Tue Oct 19 19:33:43 2010 (4CBE2AD7)
EtronHub3.sys Fri Feb 25 12:51:55 2011 (4D67EC3B)
nvhda64v.sys Thu Nov 11 18:10:36 2010 (4CDC77EC)
RTKVHD64.sys Fri Feb 11 05:16:05 2011 (4D550C65)
SAlpham64.sys Fri Sep 16 15:00:29 2011 (4E739CCD)
lvuvc64.sys Wed Jan 18 01:41:08 2012 (4F166984)
lvrs64.sys Wed Jan 18 01:40:36 2012 (4F166964)
gdrv.sys Thu Mar 12 23:22:29 2009 (49B9D175)
Rt64win7.sys Thu Jan 13 06:57:19 2011 (4D2EE89F)
nvlddmkm.sys Thu Feb 09 21:02:58 2012 (4F347AD2)
nvBridge.kmd Thu Jan 20 20:10:57 2011 (4D38DD21)

http://www.carrona.org/drivers/driver.php?id=amdxata.sys
http://www.carrona.org/drivers/driver.php?id=iaStor.sys
http://www.carrona.org/drivers/driver.php?id=MpFilter.sys
http://www.carrona.org/drivers/driver.php?id=AppleCharger.sys
http://www.carrona.org/drivers/driver.php?id=EtronXHCI.sys
http://www.carrona.org/drivers/driver.php?id=HECIx64.sys
http://www.carrona.org/drivers/driver.php?id=EtronHub3.sys
http://www.carrona.org/drivers/driver.php?id=nvhda64v.sys
http://www.carrona.org/drivers/driver.php?id=RTKVHD64.sys
http://www.carrona.org/drivers/driver.php?id=lvuvc64.sys
http://www.carrona.org/drivers/driver.php?id=lvrs64.sys
... Read more

http://www.sevenforums.com/bsod-help-support/234303-bsods-driver_power_state_failure-involving-ntoskrnl-exe.html
Relevancy 52.46%

My grandmother has bought a HP p2-1113w with windows 7 home premium x64. It's only a few months old and has crashed 8+ times with the same error, IRQL_NOT_LESS_OR_EQUAL indicating ntoskrnl.exe+7e569

I'm using the computer to teach my grandmother how to use the internet, make word documents, etc. No games (she doesn't even know how to play minesweeper) and the only videos she watches are Antiques Roadshow, but, the BSODs started pretty much right away, even before we started.

As far as I'm aware all drivers are up to date, and all windows updates have been installed.

I've attached the minidump file/s created by SF diagnostic tool.

A:Random BSODs. Seems to be ntoskrnl.exe+7e569.

Welcome to SF.

Please upload your msinfo32.nfo file. To get this: Start Menu -> Type msinfo32 into the Search programs and files box -> When it opens, go to File, Save -> Save as msinfo32.nfo and save in a place you will remember -> Let it finish the process of gathering and saving the system info -> Right click the .nfo file, click send to compressed (zipped) folder -> Upload the .zip file here.

Please upload your msinfo32.txt file. To get this: Start Menu -> Type msinfo32 into the Search programs and files box -> When it opens, go to File, Export -> Save as msinfo32.txt and save in a place you will remember -> Let it finish the process of gathering and saving the system info -> Right click the .txt file, click send to compressed (zipped) folder -> Upload the .zip file here.

The BSOD was caused by older Netgear Neutral Wireless Solution drivers.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {0, 2, 1, fffff80002a9dd2c}

*** WARNING: Unable to verify timestamp for scmndisp.sys
*** ERROR: Module load completed but symbols could not be loaded for scmndisp.sys
Probably caused by : scmndisp.sys ( scmndisp+16d1 )

Followup: MachineOwner
---------
0: kd> lmvm scmndisp
start end module name
fffff880`0189e000 fffff880`018a8000 scmndisp T (no symbols)
Loaded symbol image file: scmndisp.sys
Image path: scmndisp.sys
Image name: scmndisp.sys
Timestamp: Fri May 27 16:30:22 2011 (4DDF7D3E)
CheckSum: 00009C0C
ImageSize: 0000A000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Click on the Start ► Control Panel ► Programs ► Uninstall a program ► Uninstall everything related to; Netgear Neutral Wireless Solution and restart the system. Delete remnants of its drivers/older drivers using Driver Fusion/Sweeper

Get latest drivers from: Driver Reference Table

Post back results.

http://www.sevenforums.com/bsod-help-support/267839-random-bsods-seems-ntoskrnl-exe-7e569.html
Relevancy 52.46%

I just built a new computer for home use and have been having multiple BSODs, all at the process ntoskrnl.exe. Most of them have been MEMORY_MANAGEMENT errors, but not all. I'm not sure what I should do to fix this. All the components are still eligible for Newegg RMA. Windows Memory Diagnostic didn't find anything when I ran it.

My specs are
AMD Phenom II X4 960T Zosma 3.0GHz CPU, Gigabyte GA-990FX-UD3 Mobo, 2x4GB Cosair Vengance DDR3 1600 RAM, HIS Radeon HD 6850 1GB 256-bit GDDR5 VGA, OCZ ModXStream Pro 500W PSU, Antec Khuler H2O 620, Antec Three Hundred Two, Seagate 2TB 5900 RPM HDD.

A:Windows 7 ntoskrnl.exe BSODs, various messages

Please update to SP1 - Learn how to install Windows 7 Service Pack 1 (SP1)


Code:
AODDriver2.sys Wed Jun 15 04:38:35 2011 (4DF86F8B)
AMD OverDrive (AODDriver2.sys) is either a stand-alone application, or a component of the AMD VISION Engine Control Center.
Please uninstall the AMD OverDrive program as it can cause BSOD's on your system.
If it's the stand-alone app, uninstall it via Control Panel...Programs...Uninstall a program
If it's in the AMD VISION Engine Control Center, you can uninstall it using the AMD uninstall tool (or uninstall the entire AMD VISION Engine Control Center application through Control Panel

If the device remains a problem in perfmon /report, open Device Manager, select the "View" item.
Then select "Show hidden devices" and scroll down to the Plug and Play Drivers section.
Locate the AODDriver entry, right click on it and select "Uninstall". Reboot for changes to take affect.



Code:
Rt64win7.sys Thu Jan 13 06:57:19 2011 (4D2EE89F)
Update your Realtek driver -
Realtek

Run a memory test
Memtest86 - Run for 7-8 passes - http://www.sevenforums.com/tutorials...memtest86.html

BSOD BUGCHECK SUMMARY

Code:

Built by: 7600.16841.amd64fre.win7_gdr.110622-1503
Debug session time: Fri Feb 10 20:32:38.583 2012 (UTC - 5:00)
System Uptime: 0 days 1:07:08.284
Probably caused by : win32k.sys ( win32k!EngTextOut+11e )
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
BUGCHECK_STR: 0x3B
PROCESS_NAME: chrome.exe
FAILURE_BUCKET_ID: X64_0x3B_win32k!EngTextOut+11e
BiosReleaseDate = 10/13/2011
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = GA-990FXA-UD3
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16841.amd64fre.win7_gdr.110622-1503
Debug session time: Fri Feb 10 18:05:42.631 2012 (UTC - 5:00)
System Uptime: 0 days 0:06:41.332
Probably caused by : memory_corruption ( nt!MiReleaseConfirmedPageFileSpace+87 )
BUGCHECK_STR: 0xA
PROCESS_NAME: MsMpEng.exe
FAILURE_BUCKET_ID: X64_0xA_nt!MiReleaseConfirmedPageFileSpace+87
BiosReleaseDate = 10/13/2011
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = GA-990FXA-UD3
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Wed Feb 8 19:19:39.727 2012 (UTC - 5:00)
System Uptime: 0 days 0:04:59.413
*** ERROR: Symbol file could not be found. Defaulted to export symbols for ndis.sys -
*** WARNING: Unable to verify timestamp for Rt64win7.sys
*** ERROR: Module load completed but symbols could not be loaded for Rt64win7.sys
Probably caused by : Rt64win7.sys ( Rt64win7+1596b )
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
PROCESS_NAME: System
ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
BUGCHECK_STR: 0x7E
FAILURE_BUCKET_ID: X64_0x7E_Rt64win7+1596b
BiosReleaseDate = 10/13/2011
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = GA-990FXA-UD3
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16841.amd64fre.win7_gdr.110622-1503
Debug session time: Sun Feb 12 09:55:35.309 2012 (UTC - 5:00)
System Uptime: 0 days 0:06:57.621
Probably caused by : ntkrnlmp.exe ( nt! ?? ::NNGAKEGL::`string'+62f8 )
BUGCHECK_STR: 0x1a_31
PROCESS_NAME: svchost.exe
FAILURE_BUCKET_ID: X64_0x1a_31_nt!_??_::NNGAKEGL::_string_+62f8
BiosReleaseDate = 10/13/2011
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = GA-990FXA-UD3
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16841.amd64fre.win7_gdr.110622-1503
Debug sessi... Read more

http://www.techsupportforum.com/forums/f299/windows-7-ntoskrnl-exe-bsods-various-messages-630888.html
Relevancy 52.46%

I built this PC for my parents a few years ago. Recently, I've been chasing a series of BSOD errors. I have tried multiple system restores, updated drivers, and ran a couple inconclusive memory tests. The PC has has BSOD's on startup, during light usage, and while not in use. I'm starting to suspect hardware issues, but I thought I would ask for some help before I start pulling cards out. System Specs should be accurate. I am running an OEM install of Windows 7 Professional 64 bit. Thanks in advance for the help.

A:PAGE_FAULT_IN_NONPAGED_AREA- Multiple ntoskrnl.exe BSODs

Welcome to the forum SeptemAuxilium,

Uninstall Avast! for the time being.

Microsoft Security Essentials is recommended from a strict BSOD perspective, compatibility & stability
compared to other antivirus or internet security software. It is free and lightweight:-Microsoft Security Essentials - Free Antivirus for Windows
Malwarebytes: Removes malware including viruses, spyware, worms and trojans, plus it protects your computer
Good and Free system security combination.


   Warning
Do not start the free trial of Malware Bytes; remember to deselect that option when prompted.



Run the System File Checker that scans the of all protected Windows 7 system files and replaces incorrect corrupted, changed/modified, or damaged versions with the correct versions if possible:Click on the
Type CMD on Search
Left click and Run as Administrator
Type SFC /scannow
Full tutorial here:SFC /SCANNOW Command - System File Checker

PLease update the drivers below:

ASACPI.sys Mon Mar 28 08:30:36 2005 (42476C4C)
Asus ATK0110 ACPI Utility (a known BSOD maker in Win7 and Win8). Also a part of many Asus utilities (Win8 versions available from Windows Update as an Optional Update - but check Asus first!)
Driver Reference Table - ASACPI.sys

BrSerId.sys Mon Aug 7 07:51:11 2006 (44D69C8F)
Brother Serial I/F Driver (WDM)
Driver Reference Table - BrSerId.sys

BrUsbSer.sys Wed Aug 9 18:11:02 2006 (44D9D0D6)
Brother MFC USB Serial WDM Driver
Driver Reference Table - BrUsbSer.sys

atikmpag.sys Wed Apr 20 07:22:32 2011 (4DAE3558)
ATI Video driver (remove the Catalyst Control Center and only install the Display Driver)
Driver Reference Table - atikmpag.sys

atikmdag.sys Wed Apr 20 07:53:29 2011 (4DAE3C99)
ATI Video driver (remove the Catalyst Control Center and only install the Display Driver)
Driver Reference Table - atikmdag.sys

Rt64win7.sys Fri Jun 10 12:33:15 2011 (4DF1BAAB)
Realtek RTL8168D/8111D Family PCI-E Gigabit Ethernet NIC
Driver Reference Table - Rt64win7.sys

Sometimes drivers remain, not completely uninstalled. Follow this tutorial for complete removal of drivers of the particular program: How to Clean Left Over Driver Files with Driver SweeperDrivers - Clean Left over Files after Uninstalling
Use Revo Uninstaller to uninstall stubborn software. Opt for Advance Mode while uninstalling which allows you to remove leftover registry:-Download Revo Uninstaller Freeware - Free and Full Download - Uninstall software, remove programs, solve uninstall problems
Check for heating issues using Speccy or HWMonitor. Upload a screen shot with either of the tools: Speccy - System Information - Free Download
HWMonitor CPUID - System & hardware benchmark, monitoring, reporting
Screenshots and Files - Upload and Post in Seven Forums
Make scans with the following:

Kaspersky TDSSKillerAnti-rootkit utility TDSSKiller
ESET online scanner: Free Online Virus Scanner | ESET
Run Disk Check on your Hard Drive for file system errors and bad sectors on it:How to Run Disk Check in Windows 7
Upload a screenshot of your hard disk using Crystal Disk Info:CrystalDiskInfo - Software - Crystal Dew World
Screenshots and Files - Upload and Post in Seven Forums
BSOD BUGCHECK SUMMARY

Code:
Built by: 7601.18409.amd64fre.win7sp1_gdr.140303-2144
Debug session time: Tue Jul 29 00:44:01.881 2014 (UTC + 6:00)
System Uptime: 0 days 0:00:47.802
BugCheck 50, {ffffffffffffff80, 1, fffff88007cb3535, 0}
Probably caused by : memory_corruption
BUGCHECK_STR: 0x50
PROCESS_NAME: svchost.exe
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.18409.amd64fre.win7sp1_gdr.140303-2144
Debug session time: Tue Jul 22 03:05:00.583 2014 (UTC + 6:00)
System Uptime: 0 days 0:00:57.504
BugCheck 1E, {0, 0, 0, 0}
Probably caused by : ntkrnlmp.exe ( nt!KiKernelCalloutExceptionHandler+e )
BUGCHECK_STR: 0x1E
PROCESS_NAME: svchost.exe
????????????????????????... Read more

http://www.sevenforums.com/bsod-help-support/339524-page_fault_in_nonpaged_area-multiple-ntoskrnl-exe-bsods.html
Relevancy 52.46%

Hello

I've got an issue with daily BSODs,

The BSODs come in row, so i usually get 2-3 in a row and then my computer boots up well

I've looked at the minidumps, but my technical knowlegde is limited, so i can't really spot the problem, though the minidump thinks Ntoskrnl is the cause

So if any would be kind to look at them and give me some advice
 

A:Daily BSODs on Win7, Ntoskrnl

Hello,

Start by uninstalling the Asus PC Probe utility. Especially this older one is known to cause BSODs.
Code:
ghaio.sys Mon May 30 05:34:05 2005 (429ADE0D)
Next, remove Daemon Tools or similar programs, as they are using SPTD. SPTD is a driver known to cause BSODs since Vista.
Code:
aagr6zj9.SYS Tue Jul 14 17:12:55 2009 (4A5CF4D7) -- a driver dynamically allocated by SPTD
sptd.sys Sun Oct 11 16:55:14 2009 (4AD24632)
Remove SPTD itself with this tool: http://www.duplexsecure.com/download/SPTDinst-v174-x64.exe

While not blamed, Avast is known to cause some BSODs. I suggest you remove it with this tool: http://files.avast.com/files/eng/aswclear5.exe

MSE is the recommended replacement:

http://www.microsoft.com/security_essentials

Update your Realtek NIC drivers: http://218.210.127.131/downloads/do...d=5&Level=5&Conn=4&DownTypeID=3&GetDown=false
Code:
Rt64win7.sys Thu Jul 30 07:58:43 2009 (4A718AF3)
Update or remove LogMeIn:
Code:
hamachi.sys Thu Feb 19 05:36:41 2009 (499D3639)
If the BSODs persist, could you upload a full BSOD report? Follow the directions here: http://www.jcgriff2.com/BSODpostinstructions.html

Zip up the output folder, and upload it to Rapidshare or a similar site.

...Summary of the Dumps:
Code:
[font=lucida console]
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Mon Nov 1 06:15:14.265 2010 (UTC - 4:00)
System Uptime: 0 days 0:01:47.434
BugCheck 1E, {ffffffffc0000096, fffff80003c680fa, 0, 0}
Probably caused by : ntkrnlmp.exe ( nt!KeStackAttachProcess+1ba )
BUGCHECK_STR: 0x1E_c0000096
จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Mon Nov 1 02:53:55.416 2010 (UTC - 4:00)
System Uptime: 0 days 0:04:01.585
BugCheck 50, {fffff880095748e8, 0, fffffa8004683012, 0}
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+42837 )
BUGCHECK_STR: 0x50
PROCESS_NAME: System
จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ[/font]

 

http://www.techspot.com/community/topics/daily-bsods-on-win7-ntoskrnl.155868/
Relevancy 52.46%

I've had my computer for about - years and just recently I have been getting random BSODs sometimes when playing games but also on other times just when browsing the web or opening closing programs I've already replaced my HD and did a Clean install of Windows I also replaced video card and did memtest as well but I'm still getting BSODs Sometimes I will get BSOD more than once a day other times not for a couple of days it's really intermittant I found a program called WhoCrashed which analyse crash dump settings and it was somewhat helpful with the errors and google searching and I tried some of the suggestions during the search I found but it didn't really seem to help besides what I already tried The dmp files that were found with the SF Diagnostic Tool were only from about the past month or so since I reinstalled Win Lately I have been getting ntoskrnl exe with either SYSTEM SERVICE EXCEPTION with so day Random once about a ntoskrnl.exe or tcpip.sys. BSODs and or IRQL NOT LESS OR EQUAL but before I was getting PAGE FAULT IN NONPAGED AREA I also got a BSOD on tcpip sys Any Random BSODs about once a day or so with ntoskrnl.exe and tcpip.sys. help would Random BSODs about once a day or so with ntoskrnl.exe and tcpip.sys. be appreciated this is driving me nuts Thanks

A:Random BSODs about once a day or so with ntoskrnl.exe and tcpip.sys.

Welcome to SevenForums.

You need to reinstall the drivers for MotioninJoy simulate Xbox 360 controller (virtual Xinput device). Click on the Start ► Control Panel ► Programs ► Uninstall a program ► Uninstall everything related to that program. Delete remnants of its drivers/older drivers using Driver Fusion/Sweeper and install the latest from here.

Avast! antivirus can contribute in BSOD-s. PLease uninstall and use Microsoft security essentials (TO TEST).avast! Uninstall Utility | Download aswClear for avast! Removal
Recommended antivirus program for Windows 7 based on stability compared to others:-
Microsoft Security Essentials - Free Antivirus for Windows
Malwarebytes - The Free version
Good and Free system security combination.
Do not start the free trial of Malware Bytes; remember to deselect that option when prompted.

Run a full scan with both (separately) once downloaded, installed and updated.

Run the System File Checker that scans the of all protected Windows 7 system files and replaces incorrect corrupted, changed/modified, or damaged versions with the correct versions if possible:
Click on the
Type CMD on Search
Left click and Run as Administrator
Type SFC /scannow
Full tutorial here:SFC /SCANNOW Command - System File Checker
Run Disk Check on your hard disk for file system errors and bad sectors on it:Disk Check
Free up the start-up, nothing except the antivirus is usually needed.Startup Programs - Change
Troubleshoot Application Conflicts by Performing a Clean Startup
*Update your network card drivers.Let us know if there are any improvements or not.

Then take memtest. Run for 8 passes and test each stick in a know good slot for an additional 6 passes.
RAM - Test with Memtest86+
Guide to using Memtest86+ - Geeks to Go Forums






Quote:
The goal is to test all the RAM sticks and all the motherboard slots.

Check your motherboard manual to ensure the RAM sticks are in the recommended motherboard slots. Some motherboards have very specific slots required for the number of RAM sticks installed.

If you get errors, stop the test and continue with the next step.

1. Remove all but one stick of RAM from your computer (this will be RAM stick #1), and run Memtest86 again, for 7 passes.
Be sure to note the RAM stick, use a piece of tape with a number, and note the motherboard slot.
If this stick passes the test then go to step #3.

2. If RAM stick #1 has errors, repeat the test with RAM stick #2 in the same motherboard slot.
If RAM stick #2 passes, this indicates that RAM stick #1 may be bad. If you want to be absolutely sure, re-test RAM stick #1 in another known good slot.
If RAM stick #2 has errors, this indicates another possible bad RAM stick, a possible motherboard slot failure or inadequate settings.
3. Test the next stick of RAM (stick #2) in the next motherboard slot.
If this RAM stick has errors repeat step #2 using a known good stick if possible, or another stick.
If this RAM stick has no errors and both sticks failed in slot#1, test RAM stick #1 in this slot.
4. If you find a stick that passes the test, test it in all the other motherboard slots.

If Part 2 testing shows errors, and all tests in Part 3 show errors, you will need to test the RAM sticks in another computer and/or test other RAM in your computer to identify the problem.

In this way, you can identify whether it is a bad stick of RAM, a bad motherboard, or incompatibility between the sticks.


Errors are sometimes found after 8 passes.
Do this test overnight, before going to bed.

http://www.sevenforums.com/bsod-help-support/266328-random-bsods-about-once-day-so-ntoskrnl-exe-tcpip-sys.html
Relevancy 52.46%

For a long time now to and while gaming ntoskrnl Various BSODs others relating - over a year - I've been getting seemingly random blue-screens of the time during playing video Various BSODs relating to ntoskrnl and others while gaming games It doesn't ALWAYS happen and sometimes it goes days without happening but other times it is nearly every time I play for Various BSODs relating to ntoskrnl and others while gaming longer than minutes I upgraded several months ago to Windows Pro and the problem persisted Since this all started I upgraded my entire computer including new motherboard CPU and RAM Since this usually only happened during playing video games I thought the video card was the culprit as unlikely as that is but after upgrading my video card the same problem persists I checked the hard-disk for errors using chkdsk WD Lifeguard - all with no errors I ran sfc scannow and it said it found uncorrectable errors and after following instructions from this forum finally got it to say it found no errors Basically the only thing I haven't done is reformat my system and replace the only remaining original hardware left my HDDs and my PSU

A:Various BSODs relating to ntoskrnl and others while gaming

No help from anyone?

Update: I have since reformatted with Windows 8 Pro on a DIFFERENT hard-drive than what I was using before. After hours of gaming, everything was fine. Then this morning, after about 15 minutes, BSOD again... This time it was different though.

081914-21296-01.dmp 8/19/2014 6:15:23 AM SYSTEM_THREAD_EXCEPTION_NOT_HANDLED 0x1000007e ffffffff`c0000005 fffff801`f22e93a5 ffffd000`236f35c8 ffffd000`236f2dd0 dfsc.sys dfsc.sys+16c4c14 DFS Namespace Client Driver Microsoft? Windows? Operating System Microsoft Corporation 6.3.9600.17041 (winblue_gdr.140305-1710) x64 dfsc.sys+16873a5 C:\Windows\Minidump\081914-21296-01.dmp 4 15 9600 295,896 8/19/2014 6:16:31 AM

http://www.eightforums.com/bsod-crashes-debugging/51997-various-bsods-relating-ntoskrnl-others-while-gaming.html
Relevancy 52.46%

For a long time I've been suffering from BSODs ntoskrnl.exe Multiple the culprit? BSODs with as Just yesterday I Multiple BSODs with ntoskrnl.exe as the culprit? had two one while browsing the web and another while playing Medieval II Total War Here is the analysis from WhoCrashed ----- On Fri your Multiple BSODs with ntoskrnl.exe as the culprit? computer crashed This was likely caused by the following module ntoskrnl exe Bugcheck code x E x x x x Error KMODE EXCEPTION NOT HANDLED Dump file C Windows Minidump - - dmp file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System The crash took place in a standard Microsoft module Your system configuration may be incorrect possibly the culprit is in another driver on your system which cannot be identified at this time On Fri your computer crashed This was likely caused by the following module ntoskrnl exe Bugcheck code x F x x x F xFFFFF A Error UNEXPECTED KERNEL MODE TRAP Dump file C Windows Minidump - - dmp file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System The crash took place in a standard Microsoft module Your system configuration may be incorrect possibly the culprit is in another driver on your system which cannot be identified at this time ------ At first I thought installed Windows wrongly for some reason files were left over from my XP system even though I had selected quot Custom Install quot and the local repair shop suggested reinstalling XP then installing again They did so and this time it was a clean install The BSODs I was getting before were different however ------ On Tue your computer crashed This was likely caused by the following module ntoskrnl exe Bugcheck code xA x x x xFFFFF AC Error IRQL NOT LESS OR EQUAL Dump file C Windows Minidump - - dmp file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System The crash took place in a standard Microsoft module Your system configuration may be incorrect possibly the culprit is in another driver on your system which cannot be identified at this time On Sun your computer crashed This was likely caused by the following module ntoskrnl exe Bugcheck code xA x x x xFFFFF C Error IRQL NOT LESS OR EQUAL Dump file C Windows Minidump - - dmp file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System The crash took place in a standard Microsoft module Your system configuration may be incorrect possibly the culprit is in another driver on your system which cannot be identified at this time On Fri your computer crashed This was likely caused by the following module dxgkrnl sys Bugcheck code xA x x x xFFFFF Error IRQL NOT LESS OR EQUAL Dump file C Windows Minidump - - dmp file path C Windows system drivers dxgkrnl sys product Microsoft Windows Operating System company Microsoft Corporation description DirectX Graphics Kernel The crash took place in a standard Microsoft module Your system configuration may be incorrect possibly the culprit is in another driver on your system which cannot be identified at this time On Fri your computer crashed This was likely caused by the following module ntoskrnl exe Bugcheck code xA x x x xFFFFF Error IRQL NOT LESS OR EQUAL Dump file C Windows Minidump - - dmp file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System The crash took place in a standard Microsoft module Your system configuration may be incorrect possibly the culprit is in another driver on your system which cannot be identified at this time ------ Stupidly I didn't back up the crash dump files themselves so I'm afraid I can't attach them Also previously Windows Memory Diagnostic was telling me t... Read more

A:Multiple BSODs with ntoskrnl.exe as the culprit?

Uninstall Opera and download Firefox Browser | Free ways to customize your Internet as for the other blue screen make sure all your drivers are up to date, also make sure the game is up to date as well.

http://www.sevenforums.com/bsod-help-support/78919-multiple-bsods-ntoskrnl-exe-culprit.html
Relevancy 52.46%

Hello I have had a slew of BSOD problems within the past year or so they seem to come and go for the most part I have tried a ton of things to pinpoint the problem but have not really be able to tell what exactly is causing the issue The BSODs will happen at random for the most part sometimes during a game others while doing nothing at all To make matters worse a lot of times things will crash randomly especially games but sometimes even chrome concerning primarily Multiple BSODs, ntoskrnl.exe tabs will just crash Multiple BSODs, primarily concerning ntoskrnl.exe unexpectedly these crashes tend to happen more often then a full on BSOD My computer worked perfectly Multiple BSODs, primarily concerning ntoskrnl.exe for the longest time after I built it Multiple BSODs, primarily concerning ntoskrnl.exe but after a few initial BSODs it started to be quite unstable Things I have tried - Updating Drivers - Re seating RAM multiple times - Running on individual RAM sticks - Memtest for passes hours no errors - chdsk - I have reinstalled windows once and seemed to make the errors less prevalent but didn't cure it - sfc scannow says I have errors but cannot fix them I am unsure how I go about this - I do not run overclocked - and some other irrelevant things I tried running verifier but I couldn't get windows to boot properly after showing the splash screen it would just go straight to a black screen and just hang there didn't BSOD or crash just froze there maybe you guys can provide some help Thanks in advance

Relevancy 52.46%

Hello,

I was hoping someone could help me with a recurring BSOD issue. There doesn't seem to be any pattern as to when they occur; sometimes it will be a month in between instances, othertimes a day or a week. I've followed the instructions here:

http://www.sevenforums.com/crashes-d...tructions.html

and have attached a zip folder with all requested details. Please let me know if there is more information that would be helpful.

-Win7 64bit OEM
-Hardware and OS new in 9/2010

A:Random BSODs, MEMORY_MANAGEMENT, ntoskrnl.exe

These crashes were caused by memory management, probably by Broker.exe {AmiBroker for Win32 is a process file from company AmiBroker.com}

Please run these two tests to verify your memory and find which driver is causing the problem.

If you are overclocking anything reset to default before running these tests.
In other words STOP!!!
1-Memtest.





Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.



RAM - Test with Memtest86+

2-Driver verifier






Quote:
I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.


Driver Verifier - Enable and Disable
Further Reading
Using Driver Verifier to identify issues with Windows drivers for advanced users
Note Avast was also involved.
Avast is sometimes a contributing cause of BSOD'S .
Please remove and replace it with Microsoft Security Essentials AT LEAST TO TEST

http://files.avast.com/files/eng/aswclear5.exe

Microsoft Security Essentials - Free Antivirus for Windows

http://www.sevenforums.com/bsod-help-support/203865-random-bsods-memory_management-ntoskrnl-exe.html
Relevancy 52.46%

Hi all I've been having repeated BSODs everytime I run Starcraft and make it past the loading screen to start a game The BSODs are always IRQL 2 during Starcraft (ntoskrnl.exe) Multiple BSODs NOT LESS OR EQUAL errors with the code x a Most of the dump files seem to point towards ntoskrnl exe as the problem I've installed the Microsoft hotfix for x a errors and have updated most of my drivers including my graphics card NVIDIA M GT but I am still getting the same BSODs They used to occur infrequently but now they happen almost everytime I try to start a new game I am running Windows Pro x This has been installed on my system since the early spring I am running Windows natively on a partioned hard drive using Apple's Boot Camp on an early Unibody Macbook Pro quot for full disclosure but this shouldn't really matter Can anyone please help I've attached the Windows BSOD dump files and PERFMON system health report below Also the most recent BSOD dump files dated since August seem to be the most relevant Thanks

A:Multiple BSODs during Starcraft 2 (ntoskrnl.exe)

  
Quote: Originally Posted by roarcraft


Hi all,

I've been having repeated BSODs everytime I run Starcraft 2 and make it past the loading screen to start a game.

The BSODs are always IRQL_NOT_LESS_OR_EQUAL errors with the code 0x0000000a. Most of the dump files seem to point towards ntoskrnl.exe as the problem.

I've installed the Microsoft hotfix for 0x0000000a errors and have updated most of my drivers (including my graphics card, NVIDIA 9600M GT), but I am still getting the same BSODs. They used to occur infrequently, but now they happen almost everytime I try to start a new game.

I am running Windows 7 Pro x64. This has been installed on my system since the early spring. I am running Windows natively on a partioned hard drive using Apple's Boot Camp on an early 2009 Unibody Macbook Pro 15" for full disclosure, but this shouldn't really matter.

Can anyone please help? I've attached the Windows 7 BSOD dump files and PERFMON system health report below. Also, the most recent BSOD dump files dated since August seem to be the most relevant.

Thanks!


This is pretty straight forward, KeyMagic.sys, which is Apple Keyboard Driver is a driver file from company Apple Inc. belonging to product KeyMagic, cause all of these BSODs. Please download and install fresh copy of it.


Code:

Microsoft (R) Windows Debugger Version 6.12.0002.633 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\TUANTR~1\AppData\Local\Temp\Rar$DI00.964\080310-47065-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*e:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.20655.amd64fre.win7_ldr.100226-1909
Machine Name:
Kernel base = 0xfffff800`02c14000 PsLoadedModuleList = 0xfffff800`02e4ce50
Debug session time: Wed Aug 4 10:29:11.744 2010 (UTC + 7:00)
System Uptime: 0 days 0:14:18.664
Loading Kernel Symbols
...............................................................
................................................................
..................................
Loading User Symbols
Loading unloaded module list
.....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {fffff80002ff2e10, 2, 8, fffff80002ff2e10}

Unable to load image \SystemRoot\system32\DRIVERS\KeyMagic.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for KeyMagic.sys
*** ERROR: Module load completed but symbols could not be loaded for KeyMagic.sys
Probably caused by : KeyMagic.sys ( KeyMagic+2e5d )

Followup: MachineOwner
---------
Let us know if you need help

Tuan

http://www.sevenforums.com/bsod-help-support/101884-multiple-bsods-during-starcraft-2-ntoskrnl-exe.html
Relevancy 52.46%

Hi I am constantly having crashes to the BSOD at random intervals My computer had been working fine until a couple of weeks or so ago when I started having BSODs left and right After getting frustrated I reinstalled windows in the hopes of removing whatever might have been the problem but the BSODs have started up again It happens with the greatest frequency when playing games but it also has occurred while installing things and a few times when I wasn't doing anything at all I've been using BlueScreenView to try and figure out the reason for the BSODs and typically it says the crashes were caused by ntoskrnl exe I don't have Service Pack because I got a BSOD while downloading it via Windows Random BSODs, ntoskrnl.exe related Update and now the download can't seem to get past Some of the dumps were created when I had driver verifier on Random BSODs, ntoskrnl.exe related I turned verifier on after getting numerous BSODs even after reinstalling windows and using DriverFinder to make sure my drivers were all accounted for I had to turn the verifier off because i could barely use my computer due to it causing BSODs in like minutes or whatever I did run Memtest before I reinstalled Windows and there were no reported errors and I'm pretty sure i've used Windows' chkdisk on all my drives so at the moment I have no idea what's wrong I even cleaned the dust out of my computer to make sure it wasn't just overheating but it seems like that didn't help I will follow the instructions on memory and hard disk diagnostic checks and post my results when I finish PC SPECS OS - Windows Professional -bit There was no OS on the system when I got it I ordered the computer from CyberPower without a copy of Windows because I already owned one Currently I'm using the upgrade version of Windows Professional purchased as a digital download from the Microsoft store online When I got my computer I first installed a disc version of Windows XP I got when I purchased one of my previous computers then upgraded it to Windows using a disc burned with an iso of my copy of windows Due to the crashes I recently reinstalled Windows probably around a week ago but am still getting BSODs CPU Intel Core i Memory Gb x GB DDR MHz GPU NVIDIA GeForce GTX Motherboard GIGABYTE GA-X A-UD R Rev Power Supply Corsair CMPSU- HX W

A:Random BSODs, ntoskrnl.exe related

Hi Welcome to TSF

Looking at your mini dump files here what I have found


Quote:




Image name: Wdf01000.sys
Timestamp: Mon Jul 13 16:22:07 2009 (4A5BC19F)
Image name: gdrv.sys
Timestamp: Thu Mar 12 20:22:29 2009 (49B9D175)




Driver Reference Table
(is your computer overclocked?) if so please STOP! and revert your motherboard to factory settings
Download all latest drivers for your motherboard from Gigabyte's website Install those drivers while you are in safe mode in windows
Reboot after each driver install and keep going into Safe mode

You can use another computer to download the Service pack for windows 7 from here
Download: Windows 7 and Windows Server 2008 R2 Service Pack 1 (KB976932) - Microsoft Download Center - Download Details
transfer it to that computer with USB or DVD media
If you have Easy Tune installed please Uninstall Easy Tune 6

http://www.techsupportforum.com/forums/f299/random-bsods-ntoskrnl-exe-related-657702.html
Relevancy 52.46%

Hi it's been barely a few days since I've gotten my laptop back from repair from Acer and already I'm blue screening again I've been having BSOD problems for a while and couldn't figure it out I checked my hard disk for errors tested my RAM for errors scanned my laptop nothing So I called Acer and they had me do a complete restore which ultimately ended in failure with to srvnet.sys)? due Random (ntoskrnl.exe, BSODs my laptop having no OS so I had to send it in Long story short I get my laptop back and then last night while watching a tv show online my laptop blue screens then restarts with no problem This morning while starting up Random BSODs due to (ntoskrnl.exe, srvnet.sys)? my laptop blue screens again and now its fine It's completely random As a side note I DID install new RAM on my laptop as soon as I first bought it - months ago but the blue screening didn't start until around month ago so I don't think it has to do with that correct me if I'm wrong I've also installed bluescreenview and this is what it said Dump File - - dmp Crash Time AM Bug Check String SYSTEM THREAD EXCEPTION NOT HANDLED Bug Check Code x e Parameter ffffffff c Parameter fffff be Parameter fffff a Parameter fffff a da Caused By Driver srvnet sys Caused By Address srvnet sys File Description Product Name Company File Version Processor x Crash Address srvnet sys c be Stack Address Stack Address Stack Address Computer Name Full Random BSODs due to (ntoskrnl.exe, srvnet.sys)? Path C Windows Minidump - - dmp Processors Count Major Version Minor Random BSODs due to (ntoskrnl.exe, srvnet.sys)? Version Dump File Size Dump File - - dmp Crash Time AM Bug Check String MEMORY MANAGEMENT Bug Check Code x a Parameter Parameter fffff ff Parameter af dd Parameter fffffa a Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe f c File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win sp gdr - Processor x Crash Address ntoskrnl exe f c Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size I have no idea what to do with this as I'm not much of a tech guy so please try to bear with me and help me out as much as you can I've also attached my minidumps I'm pretty sure they're my minidumps Thanks

A:Random BSODs due to (ntoskrnl.exe, srvnet.sys)?

Sorry, here are the files that are needed according to jcgriff2's thread. I didn't see it until it after i posted my thread.

Update: Before submitting this thread my laptop froze up for a second then restarted, no blue screen.

http://www.techsupportforum.com/forums/f299/random-bsods-due-to-ntoskrnl-exe-srvnet-sys-662714.html
Relevancy 52.46%

Hello everyone I recently put together a pc with a new motherboard CPU GPU and RAM I did a fresh install of Windows and ever since I have encountered several BSODs when gaming WoW steam games etc Normal PC functions and web browsing are fine I have yet to get a BSOD there They only happen when I all to ntoskrnl.exe related BSODs gaming... while fire up a game I have only recently been capturing them via BlueScreenViewer and WhoCrashed Anyway the culprit is always ntoskrnl exe I have tried updating every driver and have spent a lot of time reading these forums and other sites I am not the greatest pc mind but I can follow directions pretty well I am at a loss trying to figure this out I am hoping it is something simple buried in these dumps logs BSODs while gaming... all related to ntoskrnl.exe I did run a memtest prior to stumbling across these forums and it came back clean but I noticed you all recommend running the test times so that is something I can do I will also try the Furmark GPU test as well Any help would greatly be appreciated Thank you in advance

http://www.tenforums.com/bsod-crashes-debugging/57167-bsods-while-gaming-all-related-ntoskrnl-exe.html
Relevancy 52.46%

Using WhoCrashed.

Determined BSODs coming from ntoskrnl.exe.

Crashing about once a week, generally at night.

Have run extensive memory tests (MemTest and Windows) with no errors.

Have updated all possible drivers.

Uploading files here in hopes someone can help identify.

Any assistance is greatly appreciated as I can not afford any additional hair loss.

A:NTOSKRNL.EXE - Repeated BSODs - Could use some assistance

I am a big fan of Nir Sofer's work, BUT blueScreenView more often than not, doesn't point out the correct causes. Similarly Who crashed is even worse.

I prefer to use WinDbg (the Windows Debugging Tools) to read the memory dumps. It is the Gold standard for those of us that do this and often will give us the answer by itself. (we don't need the full jcgriff2 report each time).

Your 3 crashes were caused by memory corruption. Probably because of your 2005 asacpi.sys file. It is a huge cause of crashes. In any case we cant investigate the underlying cause until it is updated.

Asacpi.sys

The pre 2009 version of this driver is a known BSOD cause.





Quote:
Please visit this link: Asus tek computer inc. -support- drivers and download p7p55d le

ASUSTeK Computer Inc. -Support- Drivers and Download P7P55D LE
ASUSTeK Computer Inc. - Motherboards- ASUS P5K-VM

Scroll down to the utilities category, then scroll down to the "atk0110 driver for windowsxp/vista/windows 7 32&64-bit" (it's about the 12th item down).

Download and install it.

Go to c:\windows\system32\drivers to check and make sure that the asacpi.sys file is date stamped from 2009 or 2010 (not before).

http://www.sevenforums.com/bsod-help-support/229047-ntoskrnl-exe-repeated-bsods-could-use-some-assistance.html
Relevancy 52.46%

Hey guys, I've been getting BSODs that are apparently being caused by ntoskrnl.exe. Sometimes happen within minutes of turning on the computer, sometimes not at all. I've read it may be caused by a graphics card driver, but the driver is already on its latest version. Currently running Seatools on my HD to see if that comes up with anything...

Dump files attached.

Thanks in advance!

A:Random BSODs caused by ntoskrnl.exe

You appear you have a Acer/Gateway/Packard Bell OEM_SLP key on a retail motherboard, your installation is counterfeit, please format and install with a genuine key.

http://www.sevenforums.com/bsod-help-support/297844-random-bsods-caused-ntoskrnl-exe.html
Relevancy 52.46%

Hi Guys,

I'm getting random blue screens on my Win7 64 system. They don't specifically occur under load (ie games). My system might stay up for a day, then blue screen. It's getting a bit annoying

Mini-dumps etc attached. Cheers!

A:Random BSODs ntoskrnl.exe+75c00

please post the following here before we begin, DO NOT start a new thread: Windows Genuine and Activation Issue Posting Instructions

http://www.sevenforums.com/bsod-help-support/289336-random-bsods-ntoskrnl-exe-75c00.html
Relevancy 52.46%

Hi there Firstly here are the specs to the machine in question CPU AMD Athlon X GHz Mainboard Biostar GF E RAM x Chaintech DDR MHz GB module x Some other brand DDR MHz GB module that I sorts all causing BSODs of and ntoskrnl.exe others acquired at a later stage HDD x SATA GB Seagate drive primary x SATA GB Seagate drive secondary PSU Cooler Master Extreme Power W GPU GeForce GTS AMP running v drivers OS Windows Professional bit AntiVirus Kaspersky Internet ntoskrnl.exe and others causing all sorts of BSODs Security KB ntoskrnl.exe and others causing all sorts of BSODs Razer Lycosa Mouse CM Storm Sentinel Advanced Over the past few weeks my PC has been BSODing At first it would do so only after exiting a high performance game like War Thunder not heat related This at first I thought was caused by Nvidia drivers I then updated said drivers and it made no difference Running the PC in safe mode works perfectly which led me to believe it ntoskrnl.exe and others causing all sorts of BSODs was indeed driver related I wasn't able to create minidump files for some reason even when the correct options were set up so there was no way for me to accurately determine the cause back then I decided to just format my drive and re-do everything However even without the Nvidia drivers it would still BSOD randomly I decided to do some Windows updates just in case but this didn't help either I went as far as installing Windows on another hdd just in case it was a hdd issue Recently the PC has been BSODing as soon as it gets to the desktop and sometimes if I'm lucky it'll last a little longer It's not a heat issue as I've monitored temperatures before the event and they seem normal After the re-install I am now able for some reason the options actually work now to save dump files after a BSOD and BlueScreenViewer is telling me that these BSODs are being caused by various drivers such as ntoskrnl exe tcpip sys Ntfs sys ndis sys win k sys and one caused by Kaspersky's kneps sys of these BSODs are caused by Windows drivers This is probably why it would BSOD even after a fresh Windows install What I've determined - Highly unlikely a hard drive problem Otherwise it would mean both hard drives have the same error even when check disk reports no problems on either of them - Not a power issue I've tested the system using a new PSU and there's no change - It doesn't BSOD in safe mode so would this mean it isn't the RAM It BSODs with either RAM card installed so it means it's either both RAM cards neither RAM cards one of the two or the RAM slots themselves I've also done a re-build of the system just in case it was dust or something In an extremely clean state it ran well with a huge reduction in BSODs But then they slowly crept back to the stage it's in now Anyway I've added a few dump files ranging from the th to today th Jan I have minidump files dating as far back as Jan if you'd like me to add them Let me know what you guys think Thanks

A:ntoskrnl.exe and others causing all sorts of BSODs

Hi TheRandomGuy.

We are seeing a lot of software/drivers are failing those are enough to cause BSODs, but there is something more important error report.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 50, {ffffffffffffff8d, 1, fffff800030afd0b, ff00000000000000}
Could not read faulting driver name
Probably caused by : hardware ( nt!FsRtlUninitializeOplock+ff )

Followup: MachineOwner
---------
A hardware failure may cause any sort of other failure. So it is the first and most important to check the hardware's part.

Stress test the CPU.
Hardware - Stress Test With Prime95

Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.
If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Are you overclocking? As you are getting BSODs, you should stop overclocking and run all the hardware components like CPU, GPU and RAM to their default settings.

It seems to be an old biostar. Is the computer hot? Report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy. Alternatively, you can publish a Speccy snapshot too: Speccy - Publish Snapshot of your System Specs .

Check if the Power Supply Unit (PSU) supplying adequate power to the computer or not.
eXtreme Power Supply Calculator
Also let us know the wattage of the PSU.

Will decide the next courses of action seeing these results.

http://www.sevenforums.com/bsod-help-support/320276-ntoskrnl-exe-others-causing-all-sorts-bsods.html