Windows Support Forum

Bsod Hal.dll+12a3b/ntoskrnl.exe+18c633

Q: Bsod Hal.dll+12a3b/ntoskrnl.exe+18c633

Hello Ive been building or shall i say slowly putting this computer together for close to years now This past year ive been running Hal.dll+12a3b/ntoskrnl.exe+18c633 Bsod into problem after problem and me and my Bsod Hal.dll+12a3b/ntoskrnl.exe+18c633 buddies are stumped by its recent issues st off about months back i had a nvidia gtx ti which burnt out stopped working entirely and i had a stick of my corsair vengeance go bad as well tested with memtest and all kinds of other diagnosis tools indicated bad stick i rma'd those and sold theem to a friend and recently bought a xfx Hd and gb of corsair dominator computer started off rrunning good no Bsods no crashes until this morning installed Planet side logged in played for minutes and the computer rebooted i checked my temps and i was getting a faulty temp from Bsod Hal.dll+12a3b/ntoskrnl.exe+18c633 hwmonitor so i went into my bios to see my mobo temps everything looked nice a cool discarded changes and exited the bios and it went straight into a minidump Bsod i currently have nirsoft bluescreeen viewer on and of the errors are highlighted pink Hal dll a b and ntoskrnl exe c ive cleaned and repaired my registry repaired my windows updated all drivers clean please if anyone can help with this post i'll be your bestfriend for life asus p z deluxe gen mobo corsair iforce gb ssd gb corsair dominator xfx hd- GPU corsair HX PSU Corsair h- cooler corsair d case intel i k Not overclocking

Relevancy 100%
Preferred Solution: Bsod Hal.dll+12a3b/ntoskrnl.exe+18c633

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Bsod Hal.dll+12a3b/ntoskrnl.exe+18c633

Look at this link and post your BSOD dmp file Blue Screen of Death (BSOD) Posting Instructions

http://www.sevenforums.com/bsod-help-support/279931-bsod-hal-dll-12a3b-ntoskrnl-exe-18c633.html
Relevancy 92.02%

i am having this problem after i change my video cards i upgraded a 460 SLI to a 680
i have run 3dmark11 to try to replicate the bsod or something and nothing happends
i clean my hardware and change the thermal compound then i played some bf3 and paff the same bsod =(

pd: sorry for my english
i forgot to say that i have the last beta drivers from nvidia because with the WHQL i was having problems in gw2
Attachment 231326

A:BSOD playing bf3, hal.dll hal.dll+12a3b , ntoskrnl.exe ntoskrnl.exe+18

Welcome

For the bug check you're getting go through:
Stop 0x124 - what it means and what to try

Also get a latest version of your BIOS.


Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Yusra\Downloads\Fayer\SF_11-09-2012\091112-23509-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
Machine Name:
Kernel base = 0xfffff800`03667000 PsLoadedModuleList = 0xfffff800`038ab670
Debug session time: Wed Sep 12 06:29:05.072 2012 (UTC + 6:00)
System Uptime: 0 days 7:04:57.025
Loading Kernel Symbols
...............................................................
................................................................
................................
Loading User Symbols
Loading unloaded module list
.....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 124, {0, fffffa80086cf028, ba000000, 400405}

*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : hardware

Followup: MachineOwner
---------

5: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa80086cf028, Address of the WHEA_ERROR_RECORD structure.
Arg3: 00000000ba000000, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000000400405, Low order 32-bits of the MCi_STATUS value.

Debugging Details:
------------------
BUGCHECK_STR: 0x124_GenuineIntel

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

PROCESS_NAME: System

CURRENT_IRQL: f

STACK_TEXT:
fffff880`030acb58 fffff800`03630a3b : 00000000`00000124 00000000`00000000 fffffa80`086cf028 00000000`ba000000 : nt!KeBugCheckEx
fffff880`030acb60 fffff800`037f3b03 : 00000000`00000001 fffffa80`0860b890 00000000`00000000 fffffa80`0860b8e0 : hal!HalBugCheckSystem+0x1e3
fffff880`030acba0 fffff800`03630700 : 00000000`00000728 fffffa80`0860b890 fffff880`030acf30 fffff880`030acf00 : nt!WheaReportHwError+0x263
fffff880`030acc00 fffff800`03630052 : fffffa80`0860b890 fffff880`030acf30 fffffa80`0860b890 00000000`00000000 : hal!HalpMcaReportError+0x4c
fffff880`030acd50 fffff800`0362ff0d : 00000000`00000008 00000000`00000001 fffff880`030acfb0 00000000`00000000 : hal!HalpMceHandler+0x9e
fffff880`030acd90 fffff800`03623e88 : 0000003b`5e9a7a72 fffffa80`0ae15ac8 00000000`00000000 00000000`00000000 : hal!HalpMceHandlerWithRendezvous+0x55
fffff880`030acdc0 fffff800`036e4aac : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : hal!HalHandleMcheck+0x40
fffff880`030acdf0 fffff800`036e4913 : 00000000`00000000 00000... Read more

http://www.sevenforums.com/bsod-help-support/252352-bsod-playing-bf3-hal-dll-hal-dll-12a3b-ntoskrnl-exe-ntoskrnl-exe-18-a.html
Relevancy 89.44%

I have currently re-installed win the only software on the system is the software you wanted to grab the files and bluescreen view chrome BSOD ntoskrnl.exe+18d7d3 HAL.DLL+12a3b I believe that's it I tried many different things to figure out what the problem is as well as the clean install and the laptop still crashes as far as I can tell my drivers are up to date After using the diagnostic tool I actually read through some of the info and think maybe one of the issues might be the fan my laptop is just going on yrs old so I can't see why anything else could really be wrong I'm really at a lost here PLEASE HELP ME I've done the mem check that came back fine although I haven't figured out how to see how hot the computer or components are ggrrr at this point installing or checking anything is a hit or miss because it will crash so fast I've attached the requested info Please and thank you for your time in advance

A:BSOD HAL.DLL+12a3b ntoskrnl.exe+18d7d3

Hi and welcome to SF ladymflowers .

The BSOD's you are experiencing, BCC 0x124, are of the most generic type which offer little information
as what is actually causing them.






Quote:
A "stop 0x124" is fundamentally different to many other types of bluescreens because it stems from a hardware complaint. Stop 0x124 minidumps contain very little practical information, and it is therefore necessary to approach the problem as a case of hardware in an unknown state of distress. - H2SO4


All eleven dump files are pointing to the same core, bank and L1 cache data read error
so it seems as if we are dealing with a faulty CPU but I don't have the full picture as of yet
and thermals and RAM may be the factor in this case.


Code:
Error Type : Cache error
Operation : Data Read

===============================================================================
Section 2 : x86/x64 MCA
-------------------------------------------------------------------------------
Descriptor @ fffffa8003ecd148
Section @ fffffa8003ecd2d0
Offset : 664
Length : 264
Flags : 0x00000000
Severity : Fatal

Error : DCACHEL1_DRD_ERR (Proc 0 Bank 0)
Status : 0xb66ac00000000135
Address : 0x000000004c3b10d0
Misc. : 0x0000000000000000
Test for thermals and stability:
Download HWinfo and post a Screenshot of the 'sensors only' window, one at idle and another while putting load on the PC using Prime95 for the CPU.Before running Prime95 make sure to enable Round-off checking (see 1st post under the tutorial).
Reset the BIOS back to default:CLR CMOS


   Note
Write down the current value of the SATA Mode!
Its either AHCI or IDE.
After resetting the CMOS go back and verify the value for SATA Mode is what it was
when the OS was installed.



Seeing you have two RAM sticks, please remove one and assess the situation.
Then do the same with the latter.

Keep us posted.
Good places to read more:
Stop 0x124 - what it means and what to try
Stop 0x124 Troubleshooting - 'New Method'

http://www.sevenforums.com/bsod-help-support/319087-bsod-hal-dll-12a3b-ntoskrnl-exe-18d7d3.html
Relevancy 88.15%

I get a random bsod, most times when the computer is idle.

bluescreenview shows it getting hal dll 12a3b ntoskrnl exe+18dc33 errors

Things i have tried and still getting blue screens
-Put one RAM stick at a time, in the different slots
-I dl'ed Speccy and my temps are in the 40s
-Cleared CMOS
-Updated my BIOS software to latest
-Updated my SSD to latest hardware

Build
CPU: Intel Pentium G3258 3.2GHz Dual-Core Processor
CPU Cooler: Arctic Cooling Freezer 7 Pro Rev.2 45.0 CFM Fluid Dynamic Bearing CPU Cooler
Motherboard: Gigabyte GA-Z97-HD3 ATX LGA1150 Motherboard
Memory: Corsair Vengeance 8GB (2 x 4GB) DDR3-1600 Memory
Storage: Crucial MX100 128GB 2.5" Solid State Drive
Storage: Western Digital Caviar Blue 1TB 3.5" 7200RPM Internal Hard Drive
Video Card: MSI Radeon R9 290 4GB TWIN FROZR Video Card
Case: Corsair SPEC-03 Red ATX Mid Tower Case
Power Supply: Enermax 600W 80+ Platinum Certified Semi-Modular ATX Power Supply
DRW-24B1ST/BLK/B/AS

A:Random BSOD - hal dll 12a3b ntoskrnl exe+18dc33

Hey there! That's an awesome PC you've got there. Anyways lets get to troubleshooting. Also never use BlueScreenView, it's always inaccurate.
Code:
MODULE_NAME: hardware

IMAGE_NAME: hardware

DEBUG_FLR_IMAGE_TIMESTAMP: 0

FAILURE_BUCKET_ID: X64_0x124_GenuineIntel_PROCESSOR_MAE

BUCKET_ID: X64_0x124_GenuineIntel_PROCESSOR_MAE
Hmm, run IntelBurnTest. If the temps go to far then shut IntelBurnTest down. This might be two things, the CPU is failing or the cooler is bad.

http://www.sevenforums.com/bsod-help-support/376416-random-bsod-hal-dll-12a3b-ntoskrnl-exe-18dc33.html
Relevancy 87.29%

When I use my computer normally (as in, just browsing the internet), my computer will often lock up, then restart. I did not think it was a BSOD at first, but occasionally I would actually get the bluescreen, and crash dump files were created.

A strange thing about this BSOD is that I never get it while playing games. The sole exception is the game Path of Exile, but since no dump file is created after a Path of Exile crash, it is probably a separate problem. This problem only occurs while I am doing something mundane that does not use my processor power/memory, apparently.

Here's my Diagnostic .zip. Hopefully one of you guys can enlighten me on what the problem is.

A:BSOD during regular computer use, hal.dll+12a3b & ntoskrnl.exe+18c453

A "stop 0x124" is fundamentally different to many other types of bluescreens because it stems from a hardware complaint. Stop 0x124 minidumps contain very little practical information, and it is therefore necessary to approach the problem as a case of hardware in an unknown state of distress. You can read more on this error and what to try here... Stop 0x124 - what it means and what to try: Stop 124 - What it means and what to try


Code:
Microsoft (R) Windows Debugger Version 6.2.9200.20512 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\USER\Downloads\SF_Logmore\SF_27-10-2013\102713-30716-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.18229.amd64fre.win7sp1_gdr.130801-1533
Machine Name:
Kernel base = 0xfffff800`03667000 PsLoadedModuleList = 0xfffff800`038aa6d0
Debug session time: Sun Oct 27 22:53:06.071 2013 (UTC + 6:00)
System Uptime: 0 days 0:08:21.804
Loading Kernel Symbols
...............................................................
................................................................
..........................
Loading User Symbols
Loading unloaded module list
......
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 124, {0, fffffa8007e32028, f2000040, 800}

Probably caused by : GenuineIntel

Followup: MachineOwner
---------

3: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa8007e32028, Address of the WHEA_ERROR_RECORD structure.
Arg3: 00000000f2000040, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000000000800, Low order 32-bits of the MCi_STATUS value.

Debugging Details:
------------------
BUGCHECK_STR: 0x124_GenuineIntel

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

PROCESS_NAME: firefox.exe

CURRENT_IRQL: f

STACK_TEXT:
fffff880`02fdda58 fffff800`03630a3b : 00000000`00000124 00000000`00000000 fffffa80`07e32028 00000000`f2000040 : nt!KeBugCheckEx
fffff880`02fdda60 fffff800`037f3453 : 00000000`00000001 fffffa80`07e33d30 00000000`00000000 fffffa80`07e33d80 : hal!HalBugCheckSystem+0x1e3
fffff880`02fddaa0 fffff800`03630700 : 00000000`00000728 fffffa80`07e33d30 fffff880`02fdde30 fffff880`02fdde00 : nt!WheaReportHwError+0x263
fffff880`02fddb00 fffff800`03630052 : fffffa80`07e33d30 fffff880`02fdde30 fffffa80`07e33d30 00000000`00000000 : hal!HalpMcaReportError+0x4c
fffff880`02fddc50 fffff800`0362ff0d : 00000000`00000004 00000000`00000001 fffff880`02fddeb0 00000000`00000000 : hal!HalpMceHandler+0x9e
fffff880`02fddc90 fffff800`03623e88 : 00000000`00000020 fffff880`009b0590 00000000`00000000 00000000`00000000 : hal!HalpMceHandlerWithRendezvous+0x55
fffff880`02fdd... Read more

http://www.sevenforums.com/bsod-help-support/309747-bsod-during-regular-computer-use-hal-dll-12a3b-ntoskrnl-exe-18c453.html
Relevancy 87.29%

So I recently built a friend a new computer and he has been receiving a ton of bsods I have re installed video drivers, updated windows 7. Did countless hardware test(Video ram, check memory, Cpu test) temperatures stay around 25-35 c.
Recently uninstalled all video drivers and re installed and the bsods went away for a week or so he recently got a bsod. Is this hardware or software how do I fix these errors?

Relevancy 87.29%

ntoskrnl.exe+18c453
Funny thing is that i have router and bsod happens parallel(not always) on both computers
///
please help

A:BSOD while browsing/downloading torrents hal.dll+12a3b bsod/ntoskrnl

Hi,
Unfortunately the installation is counterfeit.
The Key is that of a Dell OEM computer - and the motherboard is a retail one by Asus.



The best course of action is to:Purchase a legitimate Windows 7 licence.
Format the HDD.
Reinstall Windows and activate.

http://www.sevenforums.com/bsod-help-support/304027-bsod-while-browsing-downloading-torrents-hal-dll-12a3b-bsod-ntoskrnl.html
Relevancy 86.43%

Hi all New to the forum and I'm after some help on the random BSOD I keep getting I occurrence. ntoskrnl.exe+18c453 Random and hal.dll+12a3b BSOD Error have recently updated my motherboard bundle with an i k overclocked to ghz Gigabyte Z -HD Every now and again I get a BSOD and it has happened during gaming and when browsing the net Using BlueScreenView gave me two addresses ntoskrnl exe ntoskrnl exe c fffff fffff dff x e x db a Microsoft Windows Operating System NT Kernel amp System win sp gdr - Microsoft Corporation C Windows system ntoskrnl exe hal dll hal dll a b fffff dff fffff e x x ce c I read on the web a few things Random BSOD occurrence. Error hal.dll+12a3b and ntoskrnl.exe+18c453 to try One was the possibility of it to do with Avast Antivirus so I uninstalled and put on MSE and the other was do with my eSata Random BSOD occurrence. Error hal.dll+12a3b and ntoskrnl.exe+18c453 connection This is just a port from the back of the PC with a SATA cable running and connecting to my mobo The eSata drive isn't always on and it still caused a BSOD Attached are the dump files as requested Anything else please let me know Thanks

A:Random BSOD occurrence. Error hal.dll+12a3b and ntoskrnl.exe+18c453

Code:
BugCheck 124, {0, fffffa8007fb0028, bf800000, 124}

Probably caused by : GenuineIntel

Code:
3: kd> !errrec fffffa8007fb0028
===============================================================================
Common Platform Error Record @ fffffa8007fb0028
-------------------------------------------------------------------------------
Record Id : 01cead73daec61e2
Severity : Fatal (1)
Length : 928
Creator : Microsoft
Notify Type : Machine Check Exception
Timestamp : 9/9/2013 16:26:47 (UTC)
Flags : 0x00000000

===============================================================================
Section 0 : Processor Generic
-------------------------------------------------------------------------------
Descriptor @ fffffa8007fb00a8
Section @ fffffa8007fb0180
Offset : 344
Length : 192
Flags : 0x00000001 Primary
Severity : Fatal

Proc. Type : x86/x64
Instr. Set : x64
Error Type : Cache error
Operation : Generic
Flags : 0x00
Level : 0
CPU Version : 0x00000000000306c3
Processor ID : 0x0000000000000006

===============================================================================
Section 1 : x86/x64 Processor Specific
-------------------------------------------------------------------------------
Descriptor @ fffffa8007fb00f0
Section @ fffffa8007fb0240
Offset : 536
Length : 128
Flags : 0x00000000
Severity : Fatal

Local APIC Id : 0x0000000000000006
CPU Id : c3 06 03 00 00 08 10 06 - bf fb da 7f ff fb eb bf
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00

Proc. Info 0 @ fffffa8007fb0240

===============================================================================
Section 2 : x86/x64 MCA
-------------------------------------------------------------------------------
Descriptor @ fffffa8007fb0138
Section @ fffffa8007fb02c0
Offset : 664
Length : 264
Flags : 0x00000000
Severity : Fatal

Error : DCACHEL0_WR_ERR (Proc 3 Bank 1)
Status : 0xbf80000000000124
Address : 0x000000023e5f5200
Misc. : 0x0000000000000086
There seems to be a problem with writing data to the cache, I would suggest running this test:Hardware - Stress Test With Prime95
Enable "Round off checking" before the test (see first post below tutorial).

Run the Small FFT's, Large FFT's and Blend Test for a few hours each, do not let the temperature exceed 80*C.

http://www.sevenforums.com/bsod-help-support/304261-random-bsod-occurrence-error-hal-dll-12a3b-ntoskrnl-exe-18c453.html
Relevancy 86.43%

Hello everybody I just have this custom PC BSOD hal.dll+12a3b x64, error Windows 0x00000124 ntoskrnl.exe+748c0 for Home use I have used it around a month The PC had worked very good but weeks ago my wife had to use it for children's homework Just when she logged into her user account the BSOD appeared after around seconds the BSOD disappeared an the PC automatically restarted So she was into this loop until I told her to force shut down When I was home I ran Windows into Safe Mode and there everything was ok I thought it could BSOD Windows x64, error 0x00000124 hal.dll+12a3b ntoskrnl.exe+748c0 be a problem of RAM memory or maybe a faulty HDD I tested the RAM for about minutes and everything was ok tested the HDD with HD Sentinel software all the tests were perfect SMART indicators are also OK as expected of a nearly new HDD I think its a problem of drivers the PC has BSOD Windows x64, error 0x00000124 hal.dll+12a3b ntoskrnl.exe+748c0 a ZOGIS GT- Pci-Ex card but the mainboard Gygabyte B M-D V has its own Video Chip that is disabled on the BIOS Then I disabled the Pci-Ex and enabled the internal Video card but the result was the same BSOD Other peripherals used are a Genius USB Facecam and an EPSON L printer both are now BSOD Windows x64, error 0x00000124 hal.dll+12a3b ntoskrnl.exe+748c0 disconnected of the PC Please let me know what more can I do or how to test the drivers I will post any news here Thanks for your help in advance

A:BSOD Windows x64, error 0x00000124 hal.dll+12a3b ntoskrnl.exe+748c0

Basically a 0x00000124 is a hardware issue; but it may be caused by anything and everything associated with the computer.

The crash dumps provide very less information in the 0x00000124 dumps. And there is only one crash dump which is unfortunately having symbol error and so I failed to read it properly.

Anyway, a single BSOD may always be treated as a glitch. If the issue continues, let us see the further dumps ... if they provide any little more info there.

http://www.sevenforums.com/bsod-help-support/374407-bsod-windows-x64-error-0x00000124-hal-dll-12a3b-ntoskrnl-exe-748c0.html
Relevancy 85.57%

I bought my computer last year Custom build Everything was working fine until January th this year I experienced my first BSOD on this machine I've tried rolling back graphics drivers which were the only ones BSOD Sparse Win7-64bit (hal.dll+12a3b, 0x00000124 ntoskrnl.exe+75bc0) I had installed recently and it didn't help because days later the same BSOD happened The next BSOD didn't happen for another month And recently this is my th one that I am attaching in the log compilation The other dmp's were Sparse BSOD 0x00000124 (hal.dll+12a3b, ntoskrnl.exe+75bc0) Win7-64bit erased by me Sparse BSOD 0x00000124 (hal.dll+12a3b, ntoskrnl.exe+75bc0) Win7-64bit by accident but they all said the same thing when I opened them in BlueScreenView I will try reseating hardware and more stress tests when I have time but I'm really lost here as its such a sparse occurrence that it makes it really hard for me to test in a reasonable amount of time I'm hoping someone here can see what my inexperienced eyes are missing Here's what I do know - I didn't install any drivers for a while month or so other than the nvidia driver which I rolled back - I am not overclocking and just running stock and default BIOS Though since my rd BSOD I have turned on XMP for my RAM didn't make anything worse I guess - The BSOD happens very randomly Twice while I was playing fairly low resource demanding games Once while I was just on desktop dragging organizing files And most recently Sparse BSOD 0x00000124 (hal.dll+12a3b, ntoskrnl.exe+75bc0) Win7-64bit while browsing Twitch tv on Chrome There seems to be nothing in common which is really frustrating - It doesn't seem to be related to how long my computer has been running The most recent happened minutes after turning my computer on - I have a minor suspicion it could be my sound because it's always given me issues distorting not being detected randomly at startup But it is onboard and I have no idea how to begin testing it I will post updates as I perform further tests will be running memtest thru the night last time only ran for hours Please let me know any good suggestions Thanks a lot

A:Sparse BSOD 0x00000124 (hal.dll+12a3b, ntoskrnl.exe+75bc0) Win7-64bit

I apologize ahead of time for losing the other 3 memory dumps, though they all appeared the same I'm sure there was useful information in there. I deleted them by accident via diskcleanup utility. I will post memory dmps as they happen in this thread, but for now if anyone sees a potential problem or has any advice to test please let me know.

http://www.sevenforums.com/bsod-help-support/328551-sparse-bsod-0x00000124-hal-dll-12a3b-ntoskrnl-exe-75bc0-win7-64bit.html
Relevancy 75.25%

Dear all,

I just created an account since I am tired. Tired of trying everything
by bworsing this forum I instantly recognized that they are ton of ID EXPERTS(!) here! Amazing!
Thank you already for even reading my post! You rock!

When I play game or use my CPU little heavier, I instantly get the BSOD

Here are the details:
See attachments --> Dumpfile

Please help me

All the best,
Greetings Darius

A:hal.dll+12a3b and ntoskrnl.exe+189bff

Please read Blue Screen of Death (BSOD) Posting Instructions

http://www.sevenforums.com/bsod-help-support/397685-hal-dll-12a3b-ntoskrnl-exe-189bff.html
Relevancy 72.24%

Random BSODs hal dll a b ntoskrnl exe cb Spex Toshiba Satellite L Laptop Windows Ultimate x SP Fresh install no updates whatsoever Intel Core Duo P hour Prime DONE GB Random hal.dll+12a3b, IRQL, 0x124.. BSODs ntoskrnl.exe+18cb03, RAM GB GB different speeds hour MEMTEST DONE Random BSODs hal.dll+12a3b, ntoskrnl.exe+18cb03, IRQL, 0x124.. ATI Radeon Mobility HD series hour Prime DONE WD Caviar GB HDD Fresh format chkdsk R DONE quot HDD Scan quot DONE Tried reseating RAM HDD DVD Other checks SFC no problems dxdiag shows no issues have turned on VERIFIER EXE and selected all non MS and some MS as Random BSODs hal.dll+12a3b, ntoskrnl.exe+18cb03, IRQL, 0x124.. well drivers to monitor Software Google Chrome No AV or Firewall Windows' Firewall disabled Tried with full drivers installed full Windows Updates Same results Now reformatted with fresh install with no updates whatsoever and no drivers isntalled Same results Tried a different source CD for Win installation Same results Problem Description Random BSODs showing x mostly IRQL x E x A hal dll ntoskrnl Occurs randomly and very frequently Half of the time can't even load into desktop Prime when it runs shows no errors but half of the time when trying to RUN the workers it the program crashes WITHOUT giving a BSOD or a Random BSODs hal.dll+12a3b, ntoskrnl.exe+18cb03, IRQL, 0x124.. freeze etc In my weeks of trying to debug this laptop there have been moments when it runs fine and I was able to play some games notably World of Tanks Pirates of the Burning Seas to test and ran beautifully Please help me solve this issue I truly want to learn how to thanks Attached is the zip files from SF Diags

A:Random BSODs hal.dll+12a3b, ntoskrnl.exe+18cb03, IRQL, 0x124..

oh and to be sure, let me remark that i have done zero overclocking.
tried with just one stick of RAM (both).
unplugged all USB.
unplugged power and ran on purely battery.
thanks.

http://www.sevenforums.com/bsod-help-support/252349-random-bsods-hal-dll-12a3b-ntoskrnl-exe-18cb03-irql-0x124.html
Relevancy 63.64%

hi guys,

i have experienced a BSOD. in attachment is a .zip with all data.

http://www.sevenforums.com/bsod-help-support/392165-bsod-hal-dll-12a3b.html
Relevancy 62.78%

Ok, so this is actually the third time I've posted here. I keep getting BSoD about once a week, I post here, someone suggests a driver update, I update that driver, then everything seems fine. Then about a week later it crashes again. I don't overclock my system, nothing is over-heating, and at this point I think I've updated all my drivers and Bios. I could be wrong though. I apologize if I'm just an idiot or something and am missing something obvious, but any help would be appreciated. Please see attached .zip file.

A:BSoD x024, hal.dll+12a3b

1: Avast is causing issues.


Code:
fffff880`0a1f5818 fffff880`03e2b7fbUnable to load image \SystemRoot\system32\drivers\aswSnx.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for aswSnx.sys
*** ERROR: Module load completed but symbols could not be loaded for aswSnx.sys
aswSnx+0xe7fb
Uninstall Avast and Install MS Security Essentials and MalwareBytes.



   Note
Make sure you uncheck the 'Enable Free Trial' box when installing.


2: Your ATI driver is old and needs updating.


Code:
0: kd> lmvm atikmdag
start end module name
fffff880`0482b000 fffff880`05341000 atikmdag T (no symbols)
Loaded symbol image file: atikmdag.sys
Image path: \SystemRoot\system32\DRIVERS\atikmdag.sys
Image name: atikmdag.sys
Timestamp: Wed Dec 19 20:38:55 2012 (50D225DF)
CheckSum: 00AC6529
ImageSize: 00B16000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Download the 13.9 driver from here then use AMD Uninstall Utility to remove all traces of your current driver, CCC etc. Reboot and install the 13.9 driver.



   Note
When installing choose 'Advanced' or 'Custom' (whichever option is available, just not Express) and uncheck everything except the video driver.
3: You've also received a few 0x124s which denote a hardware issue, but none of them are giving anything away as to what the issue actually is. Some of your other STOPs are pointing towards possible memory corruption though, so before we go into the full catalogue of hardware checks to stress your system follow the tutorial below to test your RAM first.


Code:
1: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa8007aab028, Address of the WHEA_ERROR_RECORD structure.
Arg3: 00000000b60e4000, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000000000135, Low order 32-bits of the MCi_STATUS value.
Download and run MemTest86+ to test your RAM.



   Note
Run MemTest86+ for at least 8 passes. Ideally set it off before you go to bed and leave it overnight, we're looking for zero errors here. A single error will show something's going bad with your RAM.
It's possible your BIOS may be causing issues as it's quite old and may need updating, however we'll leave that until very last as flashing your BIOS does carry a substantial amount of risk which could lead to you turning your PC into a potato.

Did you actually update your BIOS in between some of these dumps occurring?


Code:
1: kd> !sysinfo machineid
Machine ID Information [From Smbios 2.5, DMIVersion 0, Size=2420]
BiosMajorRelease = 8
BiosMinorRelease = 15
BiosVendor = American Megatrends Inc.
BiosVersion = 0211
BiosReleaseDate = 07/08/2009

Code:
1: kd> !sysinfo machineid
Machine ID Information [From Smbios 2.5, DMIVersion 0, Size=2420]
BiosMajorRelease = 8
BiosMinorRelease = 15
BiosVendor = American Megatrends Inc.
BiosVersion = 2105
BiosReleaseDate = 07/23/2010

http://www.sevenforums.com/bsod-help-support/336994-bsod-x024-hal-dll-12a3b.html
Relevancy 62.78%

Hello all - I need help figuring out what is causing this BSOD. This is occurring during gaming after several straight hours. CPU is currently not overclocked. Here is the BSV report:

==================================================
Dump File : 081113-5928-01.dmp
Crash Time : 8/11/2013 1:50:00 AM
Bug Check String :
Bug Check Code : 0x00000124
Parameter 1 : 00000000`00000000
Parameter 2 : fffffa80`0d4de028
Parameter 3 : 00000000`be000000
Parameter 4 : 00000000`0100110a
Caused By Driver : hal.dll
Caused By Address : hal.dll+12a3b
File Description : Hardware Abstraction Layer DLL
Product Name : Microsoft? Windows? Operating System
Company : Microsoft Corporation
File Version : 6.1.7601.17514 (win7sp1_rtm.101119-1850)
Processor : x64
Crash Address : ntoskrnl.exe+75c00
Stack Address 1 :
Stack Address 2 :
Stack Address 3 :
Computer Name :
Full Path : C:\Windows\Minidump\081113-5928-01.dmp
Processors Count : 4
Major Version : 15
Minor Version : 7601
Dump File Size : 292,992
Dump File Time : 8/11/2013 1:50:30 AM
==================================================

Any guidance would be greatly appreciated...I hate these kinds of problems I just built my computer it is only 1 week old... :(

A:BSOD hal.dll+12a3b (Merged)

Hi,

Please refer to the following thread and reply back accordingly with the required information - http://www.techsupportforum.com/foru...ta-452654.html

Regards,

Patrick

http://www.techsupportforum.com/forums/f299/bsod-hal-dll-12a3b-merged-704344.html
Relevancy 62.78%

Hi there so recently I've changed my PC set mb to Gigabyte GA-Z -HD CPU to i - k GPU to MSI GTX G After a week or Random 'hal.dll+12a3b' BSOD so random BSOD came by to say 'hello' to me RAM SSD PSU and other stuff are exactly the Random BSOD 'hal.dll+12a3b' same as previous PC and worked fine before changing Most of the time BSOD happen' when system is working on IDLE Never happen during gaming nor watching movie Temps are OK I did reset my CMOS setting as this CPU was OC'd to GHz now on default RAM seems to be OK although didn't test it in memtest yet but Random BSOD 'hal.dll+12a3b' as mentioned weeks ago on old setup didn't notice any BSOD for a very long time Gigabyte's EasyTune was also removed All drivers are up to date same for win updates thank Random BSOD 'hal.dll+12a3b' you in advance for your time and help Karol EDIT Memtest passed I did my own investigation while waiting to reply found out ubssrv oc only is common failure process Regarding to some posts few from here I've uninstalled iCloud app from Gigabyte Will update this thread if its gonna fix BSODs

A:Random BSOD 'hal.dll+12a3b'

Your latest dumps are all 124 errors and these are typically related to a hardware issue and can only be isolated by stress testing the major components.

If overclocking, reset all overclocks back to their default settings and then follow these:
RAM - run for a minimum of 8 consecutive passes
RAM - Test with Memtest86+
CPU - run the HIGH test
CPU - Stress Test Using IntelBurnTest
Video - run the FURMARK test for 20mins
Graphics Card Problems - Diagnose
Video Card - Stress Test with Furmark
Storage - run the SHORT test using the DOS version
SeaTools for DOS and Windows - How to Use


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 124, {0, fffffa800767f028, bf800000, 200401}
Probably caused by : GenuineIntel
Followup: MachineOwner
---------

http://www.sevenforums.com/bsod-help-support/368412-random-bsod-hal-dll-12a3b.html
Relevancy 62.35%

Hi,

ive been getting these BSOD's for a while now, but only when playing certain games(Mostly HoN, Dota2, WoW, assassins creed etc) they never happen when im using the PC for other requirements.

I've tried re seating the RAM/Vid card etc, nothing helps. I even open it up weekly and clean out the dust from it.

Im currently in the process of removing on certain RAM modules and will try my older video card as well.

My system specs are as follows :

Windows 7 Ultimate 64bit

Intel Core i7 920 @2.67 Ghz

RAM : 12gb DD3

GFX : Nvidia GTX 460 cyclone

MB : Msi X-58 Pro E



Any help would be appreciated!

A:BSOD while gaming only Hal.dll+12a3b, 0x124

1. Your .dmp file shows a stop error of 0x124 which is a general hardware error .





Quote:
A "stop 0x124" is fundamentally different to many other types of bluescreens because it stems from a hardware complaint.

Stop 0x124 minidumps contain very little practical information, and it is therefore necessary to approach the problem as a case of hardware in an unknown state of distress


Some generic advice.

If you are overclocking STOP. Return to the default settings at least for now.
If you are running a RAID update its driver.
You can read more on this error and what to try here... Stop 0x124 - what it means and what to try
2. Avast can be a contributing cause of BSOD'S .
Please remove and replace with Microsoft Security Essentials AT LEAST TO TEST
http://files.avast.com/files/eng/aswclear5.exe

http://www.microsoft.com/security_essentials/

http://www.sevenforums.com/bsod-help-support/216251-bsod-while-gaming-only-hal-dll-12a3b-0x124.html
Relevancy 60.2%

The title is pretty self-explanatory; I keep getting BSOD on steam games, particularly DotA and Civ V. I've been supremely bored without my vidjya, so any help would be much appreciated! I've attached the requisite BSOD paperwork, and am pasting some more stuff, and my system specs should be in my profile.

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033


Additional information about the problem:
BCCode: 124
BCP1: 0000000000000000
BCP2: FFFFFA8008323028
BCP3: 00000000B6004000
BCP4: 00000000DC000175
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1


Files that help describe the problem:
C:\Windows\Minidump\061114-19515-01.dmp
C:\Users\Andrew\AppData\Local\Temp\WER-27580-0.sysdata.xml

Bug Check Code:

0x00000124

Caused by Driver:

hal.dll

Last Two attempted addresses
Filename: Address in Stack:

hal.dll hal.dll+12a3b


ntoskrnl.exe ntoskrnl.exe+18c463

A:BSOD playing Steam games, Bug 0x00000124, Driver: hal.dll+12a3b

Hello, and welcome to SevenForums!

First of all, have you overclocked your graphics card at all?

The 0x00000124 error code appears during a hardware complaint, such as overheating. If you have overclocked your GPU, RESET IT IMMEDIATELY. This could be causing numerous critical errors in your GPU, causing the whole system to crash. Also, overclocking can severely damage your GPU. I would only recommend it if you know what you are doing and are not just following a tutorial.

But, this could be other things too. I see that your GPU driver is WAY out-of-date. Download the latest drivers via the AMD website.

Best of luck,

PeregrineX

http://www.sevenforums.com/bsod-help-support/335037-bsod-playing-steam-games-bug-0x00000124-driver-hal-dll-12a3b.html
Relevancy 59.77%

Hi I just built my computer about a month and a half ago and made sure my hardware was secured tightly and properly onto the mother board I updated all of the drivers youtube any error hal.dll+12a3b playing video BSOD or streams online for the PC to the best of my knowledge due to receiving BSOD in the beginning partly because the drivers were not up to date BSOD playing youtube or any online video streams error hal.dll+12a3b After the driver updates everything is working great from playing games and the usual day to day use of the PC But when I started streaming two windows of online videos from either youtube or any other video site thats when it started to give me the BSOD But it was sporadic and not crashing with every single video playback It would crash on some videos and not on others I did some research and found a software called bluescreenview which captures the BSOD codes and this was what I found hal dll a b I don't understand what this code means because based on my research it could be multiple factors Please help me Thank you - OS Windows bit - OS was full retail - Age of the system is about two months old now - Age of the OS installation is about two months old Other hardware specs CPU Intel i - K GHz Gigs of RAM

A:BSOD playing youtube or any online video streams error hal.dll+12a3b

All of them are the HAL for Windows reporting that your CPU has detected an internal failure. Given the strong consistency for these errors (they're all identical with the same cpu cache bank referenced), I'm afraid your CPU has most likely kicked the bucket.

Before you proceed on anything, if you have your system overclocked in any way, shape or fashion, reset to factory defaults. It's good sense that despite previous success with overclocking, if a system starts getting unstable, the first thing one should blame is the overclocking and reset as a result. Even if it isn't, it can easily be returned to its previous settings.

Anyways, I have sometimes seen software bugs arise that would cause this, and even once I seen a video card cause this problem (how, I have absolutely no clue). First of all, if you have any software that came with your motherboard besides the drivers, uninstall them. I've found they are very buggy as well as gimmicky, and strangely they have usually caused WHEA errors like this, making it appear the hardware is at fault. Second, update your BIOS if you haven't already, as that can potentially cause this. Lastly, run MemtestCL on your video card. Note that since you have an ATI card, you'll need to download and install the ATI APP SDK first, as it requires OpenCL.

Those should cover any potential edge cases that could create these WHEA errors. However, my opinion would be that this is certain hardware (CPU). The causes mentioned previously have the potential to create WHEA errors, but honestly, the specific WHEA error reported here is micro-architectural failure, which is most certainly the CPU's prob.

http://www.sevenforums.com/bsod-help-support/218384-bsod-playing-youtube-any-online-video-streams-error-hal-dll-12a3b.html
Relevancy 53.32%

Hey guys so I've been getting some random BSOD errors every few days or so I usually leave my computer on when I am at work or sleep and either when I come home Random BSOD error ntoskrnl.exe (address driver ntoskrnl.exe+74ec0) or wake up my computer is off So I turn it on and it says that the computer didn't Random BSOD error driver ntoskrnl.exe (address ntoskrnl.exe+74ec0) shut down properly when I start up I downloaded the BlueScreenView and noticed I've had some BSOD three times within days One Random BSOD error driver ntoskrnl.exe (address ntoskrnl.exe+74ec0) was a PAGE FAULT IN NONPAGED AREA error which I believe was a RAM problem i bought new RAM and installed it plus OCed it to but I believe it was making my system unstable so I reset the speed to default and haven't gotten that error again but after that I've gotten two IRQL NOT LESS OR EQUAL errors related to ntoskrnl exe I did some research online and from what I read it could be a number of problems I'm just not sure where to start and could really use some guidance and advice I uploaded my dmp files for anyone who knows how to look at these Thank in advance

A:Random BSOD error driver ntoskrnl.exe (address ntoskrnl.exe+74ec0)

Welcome to 7F. I'll take a look at your dumps and see if I can get you BSOD free.


One

 NETGEAR NEUTRAL WIRELESS SOLUTION

Your Netgear Neutral Wireless Solution driver has been flagged. It is quite old a could probably do with updating. Check for updates here
Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {0, 2, 1, fffff800034c88ac}

*** WARNING: Unable to verify timestamp for scmndisp.sys
*** ERROR: Module load completed but symbols could not be loaded for scmndisp.sys
Probably caused by : scmndisp.sys ( scmndisp+16d1 )

Followup: MachineOwner
---------

1: kd> lmvm scmndisp
start end module name
fffff880`0188b000 fffff880`01895000 scmndisp T (no symbols)
Loaded symbol image file: scmndisp.sys
Image path: \SystemRoot\system32\DRIVERS\scmndisp.sys
Image name: scmndisp.sys
Timestamp: Fri May 27 11:30:22 2011 (4DDF7D3E)
CheckSum: 00009C0C
ImageSize: 0000A000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4


Two

 HARDWARE DIAGNOSTICS

A few of your dumps (0x50, 0x124) are pointing towards hardware errors. 0x124s are usually always hardware errors but rarely give us an indication of what the problem actually is. In this case we may have struck lucky as this particular one shows up ASUS AI Suite III. The utilities listed below are the ones I'm concerned about.Attachment 353971


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa800752d028, Address of the WHEA_ERROR_RECORD structure.
Arg3: 00000000bf800000, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000000000124, Low order 32-bits of the MCi_STATUS value.

Debugging Details:
------------------
BUGCHECK_STR: 0x124_GenuineIntel

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

PROCESS_NAME: AISuite3.exe

CURRENT_IRQL: f

ANALYSIS_VERSION: 6.3.9600.17029 (debuggers(dbg).140219-1702) amd64fre
We have seen motherboard packaged utilities cause 0x124s in the past and it could be the case here.
Uninstall ASUS AI Suite III and test the system for stability.
Run SeaTools to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use
Download and run MemTest86+ to test your RAM. RAM - Test with Memtest86+


   Note
Attachment 353972 Run MemTest86+ for at least 8 passes. Ideally set it off before you go to bed and leave it overnight, we're looking for zero errors here. A single error will show something's going bad with your RAM.


Three

 NVIDIA GPU

You've also received a 0x116 which is a VIDEO_TDR_ERROR (Timeout Detection & Recovery) which means your GPU driver has crashed and has failed to recover in time. This could be down to the driver, the card itself or possibly the power to the card.
Code:
******************************************************************************... Read more

http://www.sevenforums.com/bsod-help-support/365399-random-bsod-error-driver-ntoskrnl-exe-address-ntoskrnl-exe-74ec0.html
Relevancy 52.89%

BSOD random, probably under heavy load situations. I dont know how to do.


DM log collector file attached

many thanks

A:BSOD random most times ntoskrnl.exe+748c0 and ntoskrnl.exe+74ec0

Hi berdini.


Code:
DEFAULT_BUCKET_ID: GS_FALSE_POSITIVE_MISSING_GSFRAME
Scan the system for possible virus infection with the following programs.
Anti-rootkit utility TDSSKiller
Windows Defender Offline
Let us know the results.
____________________________________

Code:
BugCheck F7, {fffff8800a01ff08, f8800125d135, ffff077ffeda2eca, 0}

Probably caused by : Ntfs.sys ( Ntfs!_report_gsfailure+26 )

Followup: MachineOwner
---------

http://www.sevenforums.com/bsod-help-support/373211-bsod-random-most-times-ntoskrnl-exe-748c0-ntoskrnl-exe-74ec0.html
Relevancy 52.89%

i keep getting BSOD when playing game new graphics i dont know where to start when its comes to BSOD stuff

110414-10576-01.dmp 11/4/2014 10:48:39 PM 0x00000124 00000000`00000000 fffffa80`0af318f8 00000000`00000000 00000000`00000000 ntoskrnl.exe ntoskrnl.exe+4a63cc NT Kernel & System Microsoft? Windows? Operating System Microsoft Corporation 6.1.7600.16385 (win7_rtm.090713-1255) x64 ntoskrnl.exe+4a63cc C:\Windows\Minidump\110414-10576-01.dmp 6 15 7600 262,144 11/4/2014 10:48:41 PM is some info i dont know what else yall need

A:0x00000124 ntoskrnl.exe ntoskrnl.exe+4a63cc BSOD Error runninganygame

Please Help

http://www.sevenforums.com/bsod-help-support/351242-0x00000124-ntoskrnl-exe-ntoskrnl-exe-4a63cc-bsod-error-runninganygame.html
Relevancy 52.89%

I'm getting random Blue Screens and can't figure out why. I'm not running any hardcore programs. I'm mostly just using Microsoft Office and Firefox. The BSOD's seem to happen when I'm in Outlook, Excel or Firefox. Haven't been able to determine exactly which at the time as I'm moving back and forth between them quite often.

I've tried the SFC command and it didn't find anything. I used BlueScreenViewer but not a lot of help. All drivers for sound and video have been updated. I've also updated the firmware to the Crucial M4 SSD version 040H.

Any insight would be great.

Specs:
Laptop - HP EliteBook 8560w
CPU - Intel i7-2670QM
RAM - Hynix/Hyundai 8.0 GB Ram
SSD - M4-CT256M4 SSD
Audio - AMD High Definition Audio
Video - AMD FirePro M5950
OS - Windows 7 Pro 64-bit

A:Random BSOD Reporting ntoskrnl.exe+75c40 & ntoskrnl.exe+7efc0

Update the firmware of your Crucial M4-CT256M4SSD2.

And, Uninstall McAfee Using McAfee Removal Tool. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.
Download, install and update those, and then run full system scans with both of them, one by one.

Free up the startup.
Click on the Start button
Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the “Startup” tab.
Deselect all items other than the antivirus and touchpad driver SynTPEnh.
Apply > OK
Accept then restart.
Let us know the results.

http://www.sevenforums.com/bsod-help-support/281927-random-bsod-reporting-ntoskrnl-exe-75c40-ntoskrnl-exe-7efc0.html
Relevancy 52.89%

Hi to make things easier for you dxgmms1.sys,ntoskrnl.exe,Ntfs.sys BSOD Address:ntoskrnl.exe+75bc0; below is the Bug Check String Driver and crash address SYSTEM SERVICE EXCEPTION dxgmms sys ntoskrnl exe bc MEMORY MANAGEMENT ntoskrnl exe ntoskrnl exe bc SYSTEM SERVICE EXCEPTION ntoskrnl exe ntoskrnl exe bc NTFS FILE SYSTEM Ntfs sys ntoskrnl exe bc IRQL NOT LESS OR EQUAL ntoskrnl exe ntoskrnl exe bc unrelated how could I make nice table above I have searched the forum Problem BSOD randomly usually graphics related eg flash games in chrome graphics related software Mathematica Problem I use an internet usb G device to connect to internet Every morning the device will not connect to internet and computer will hang on shutting down screen when I BSOD Address:ntoskrnl.exe+75bc0; dxgmms1.sys,ntoskrnl.exe,Ntfs.sys restart I have to manually turn off and back on again I think this may be a dying capacitor on motherboard that needs boot's to get excited Problem Chrome quot aw snap quot happens regularly and is usually flash content related even ad banners seem to cause it from time to time I have reinstalled chrome checked plugins etc etc no luck Internet explorer runs stable but for example in flash games it seems to momentarily freeze and then catch up BSOD Address:ntoskrnl.exe+75bc0; dxgmms1.sys,ntoskrnl.exe,Ntfs.sys with itself again These are moments where I think chrome would have crashed Things I've done SFC scan All's well Memtest I did pass it took an hour everything fine Will put it on over night tonight Checked for latest drivers Also have latest BIOS Checked win update Ran Intel Burn everything ok max stress over Gb RAM run min max temp thank you Noctua NH-C P this is with quiet adaptor too lol Ran malwarebytes found nothing toxic Ran SSDlife Free health SSD seems fine Bought a new motherboard assuming that the current one is going bad I haven't switched over to it yet and thought I should investigate a little further before I do ie bad RAM CPU Power Supply SSD CPU seems fine RAM passed test but will test further My own quot opinion quot until today was that there is a fault on motherboard probably with usb hardware Now I realise that it could be the power supply but I have no way to test this bar buy a new one My analysis bad motherboard or bad PSU Either way not getting away with cheap fix methinks UPDATE I enabled verifier exe using this Driver Verifier - Enable and Disable Windows crashes just before going to desktop I had to boot last known config to get up and running again IE I CAN RELIABLY CREATE BSOD USING VERIFIER EXE WITH GIVEN INSTRUCTIONS So I am going to try focusing on drivers loaded at startup by process of elimination Is there a quick way to find out which one Below is the Check String Driver and crash address for the BSOD's when using verifier exe IRQL NOT LESS OR EQUAL ntoskrnl exe ntoskrnl exe bc DRIVER IRQL NOT LESS OR EQUAL RNDISMPX SYS RNDISMPX SYS a UPDATE If I choose or more non Microsoft drivers in verifier exe I get BSOD different check strings but always at the same address Also computer seems more unstable since engaging with verifier exe I feel I have given a thorough evaluation based on information in this forum and would appreciate feedback from those with more expertise than I UPDATE Another Memtest gave errors on pass Questions any chance poor power supply can cause this anyone have experience increasing voltage to make this go away would bad RAM explain all my problems ok fine i'll go through RAM and the slots and find the bad one sigh major sigh positively tragic sigh UPDATE Started with slot with stick of RAM Did memtest but had an idea I turned on verifier exe with all rd party drivers selected and my theory was to replicate the BSOD I got earlier at startup Went through each slot each RAM combo's of RAM and then to add insult to injury with all sticks in exactly same as before no BSOD Life is tough So maybe RAM wasn't properly seated all this time or maybe I need to test the RAM proper... Read more

A:BSOD Address:ntoskrnl.exe+75bc0; dxgmms1.sys,ntoskrnl.exe,Ntfs.sys

**************UPDATE 5 ****************




The sequence of events went as follows.
RAM test 1 pass was passed. Verifier.exe caused immediate BSOD on windows start when activated. Trying to hunt down drivers revealed any combo of 3 or more drivers gave BSOD at startup. Randomly decided to recheck RAM. Failed memtest after 27 minutes pass 1. Found one RAM stick that passed after one pass slot0. Got fed up of waiting for other slot's. Devised a plan to use verifier to check the RAM by seeing which combo's of RAM sticks gave BSOD on startup. All combo's passed. And now verifier does not give BSOD on any setting. Began to hate life. Cheered myself up with prospect of sleep. Put all 16 Gb RAM in properly and ran mentest for 18 hours, 6 passes. No error. Still no verifier.exe errors when enabled. Wrote this update.


If RAM failed after 27min one test, and then after swapping around a retest of 18 hours has no error, one would presume the RAM may be ok. Equally, I believe one could say the RAM is suspect. So, if the test is failed it really doesn't tell us anything except there is a problem somewhere. But we know there is a problem since we have BSOD!!! If I hadn't rerun the test I wouldn't question the RAM.

So the question is: how do I categorically ensure that a stick of RAM is good? Is memtest on RAM with an alternative working computer enough?



In summary:

I ran memtest for 18 hours, which was 6 passes. No problems detected. Using verifier.exe with protocols given on this forum I no longer get BSOD.

Currently my hypothesis is that the RAM was never seated correctly, or given that it takes a bit of force to insert correctly into motherboard, the flexing has at least temporarily defused whatever fault was causing my BSOD. Tenuous I know. But I really have no other explanation other than something somewhere on the motherboard or power is failing, or even the RAM.

http://www.sevenforums.com/bsod-help-support/351171-bsod-address-ntoskrnl-exe-75bc0-dxgmms1-sys-ntoskrnl-exe-ntfs-sys.html
Relevancy 52.89%

Jan , Crash Address All !! BSOD ntoskrnl.exe+80640 the Time ntoskrnl.exe ------------------------------------------- How to Solve - I've uninstalled my windows and recover my laptop with recovery DVD to it's original factory state original windows - Never installed Norton internet security again I'm using Microsoft Security Essentials now - Updated my Graphic Card Driver Intel Wifi Driver Sound Card Driver And some other drivers It's been two months now with no BSOD Thanks to dear Arc and gregrocker Thank you guys ------------------------------------------- Oct ------------------------------------------- Hi guys It's almost a year that I have problems with BSOD ntoskrnl.exe , All the Time !! Crash Address ntoskrnl.exe+80640 BSODs it use to be Atikmdag BSOD but I solve that with updating my Graphic card Driver and Changing Atikmdag sys file in Windows System folder But now it's about months that I get ntoskrnl exe BSODs in lot's of situations Web surfing Windows log on Working with Unity Working with files and Really lot's of Times Even in Safe Mode with Networking I guess it's because of my Network driver because I got BSOD in Safe Mode with Network but I never got a BSOD in normal Safe mode BTW I dunno how to solve it Please Help me these BSODs are sooooooooo annoying Here is my System Specs It's Msi GX CPU Intel R Core TM i CPU M GHz Main MICRO-STAR INTERNATIONAL CO LTD MS- Bios BIOS Date Ver Memory GB HDD ST AS ATA Device Sound Card AMD High Definition Audio Device High Definition Audio Device Graphic ATI Mobility Radeon HD Series - GB GDDR OS Microsoft Windows Ultimate -bit Multiprocessor Free Service Pack it's weird that I've finished writing this without a BSOD Here is the Zip file Created with SF Diagnostic Tool

A:BSOD ntoskrnl.exe , All the Time !! Crash Address ntoskrnl.exe+80640

Code:
fffff800`00b9cc48 fffff880`010b75fcUnable to load image \SystemRoot\System32\Drivers\sptd.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for sptd.sys
*** ERROR: Module load completed but symbols could not be loaded for sptd.sys
sptd+0x4b5fc
Daemon Tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known BSOD causer. Uninstall Alcohol 120% at first. Then download SPTD standalone installer from Disk-Tools.com, and execute the downloaded file as guided below :
Double click to open it.
Click this button only:

If it is grayed out, as in the picture, there is no more SPTD in your system, and you just close the window.
Next uninstall Virtual CloneDrive, as vclone.sys is as fatal as SPTD.sys, too.
After doing these two, report the situation back.

http://www.sevenforums.com/bsod-help-support/309093-bsod-ntoskrnl-exe-all-time-crash-address-ntoskrnl-exe-80640-a.html
Relevancy 52.89%

Got my first blue screen of death tonight had firefox opened one watching youtube video another browsing internet After bsod /adress (ntoskrnl.exe+72a40) caused by driver (ntoskrnl.exe) BSOD it restarted i login but just black screen with cursor ctrl alt delete worked so i shut my computer down Boot up normally after check my minidump file bsod cause BSOD caused by driver (ntoskrnl.exe) /adress (ntoskrnl.exe+72a40) by ntoskrnl exe Did little search on google find BSOD caused by driver (ntoskrnl.exe) /adress (ntoskrnl.exe+72a40) has to do with ram and hard drive Downloaded wd data life guard diagnostic for my mechanic drive which is healthy but my ssd on shows failed end to end error rate value threshold worst is all in SMART statue Im not sure if i can trust this wd diagnostic on my crucial ssd there are alot of unknown in SMART statue too Theres no ssd diagnotic for crucial there is a firmware not sure if it helps So i downloaded and ran crystaldiskinfo on my ssd health statues says good it doesnt say end to end error rate like wd Instead same ID B line says quot unused reserve nand blocks quot instead Is my ssd good i havent ran a test on my ram yet This is almost month old build Asrock x x killer i k gtx w crucial x gb crucial gb ssd wd blue tb Heres info of bsod with bluescreenview Bug Check String- IRQL GT ZERO AT SYSTEM SERVICE Bug Check Code - x a Parameter - dc a Parameter - Parameter - Parameter - fffff b Caused By Driver- ntoskrnl exe Caused By Address- ntoskrnl exe a File Description- NT Kernel amp System

A:BSOD caused by driver (ntoskrnl.exe) /adress (ntoskrnl.exe+72a40)

Blue Screen of Death (BSOD) Posting Instructions

http://www.sevenforums.com/bsod-help-support/367819-bsod-caused-driver-ntoskrnl-exe-adress-ntoskrnl-exe-72a40.html
Relevancy 52.46%

When I put my pc in sleep mode it often crashes: the screen goes normally in sleep mode, but the pc continues to stay awake for several minutes than BSOD & restart or BSOD & shut off.
Thanks to BlueScreenView I found what is seemingly the guilty process, but I don't know what to do now.
Attachment 315989
Thanks
Also, sorry for my bad english.

A:BSOD when goes sleep, ntoskrnl.exe+e96d2/ntoskrnl.exe+81e7a

Your HUAWEI Mobile Connect driver is causing issues here.


Code:
*** WARNING: Unable to verify timestamp for ew_jubusenum.sys
*** ERROR: Module load completed but symbols could not be loaded for ew_jubusenum.sys
Probably caused by : ew_jubusenum.sys
If it's a necessary driver then update it but if not then please completely remove it.
I'm not that familiar with such devices but it should be under Network Adapters, right click on the device and click properties, then click on the driver tab and update.


Code:
fffff880`015e0000 fffff880`015fc000 ew_jubusenum T (no symbols)
Loaded symbol image file: ew_jubusenum.sys
Image path: \SystemRoot\system32\DRIVERS\ew_jubusenum.sys
Image name: ew_jubusenum.sys
Timestamp: Mon Aug 20 01:55:56 2012 (50318B1C)
CheckSum: 0001CF99
ImageSize: 0001C000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

http://www.sevenforums.com/bsod-help-support/330151-bsod-when-goes-sleep-ntoskrnl-exe-e96d2-ntoskrnl-exe-81e7a.html
Relevancy 51.6%

Hi there,

Recently I've been getting BSOD while playing WoW. I'm not sure what details to give other than the dump so I'll just tell you about my computer:

Intel i5 4690 3.5-3.9 GHZ
EVGA GTX 970 SSC (super superclocked - the fans are designed not to turn on until card reaches 60c)
16gb Hyper X Fury ram
1tb WD Black HDD
Windows 7 OS

I noticed that I haven't crashed yet while EVGA Precision X is up (it has a custom aggressive fan curve I made). Maybe this has to do with the fact that it replaces fan drivers, or something? I don't know. I'm pretty clueless as to what's going on because all these parts are pretty new and it only recently started, but it's crashed three times today. Here are the dumps.
Any help you guys can give would be greatly greatly appreciated. Thanks a ton!
 

A:BSOD ntoskrnl.exe address ntoskrnl.exe+74ec0

Any ideas? It happened again while using EVGA Precision.
 

https://forums.techguy.org/threads/bsod-ntoskrnl-exe-address-ntoskrnl-exe-74ec0.1145229/
Relevancy 51.6%

Does anyone have any idea what could be causing these BSOD errors? It started with the +74200 error about a month ago (enduser is just now informing IT) and now it is the +73c40. I've already done several Memory tests to no avail. I'm about to just
reimage but don't want to if it's just a driver issue. 

Thanks
TravisD

https://social.technet.microsoft.com/Forums/en-US/afea0b11-7904-4025-8dd6-c76d6cfa02d8/ntoskrnlexe74200-amp-ntoskrnlexe73c40-bsod?forum=w8itprogeneral
Relevancy 51.6%

I keep getting a BSOD (Critical_Object_Termination) but have no idea what is causing the issue. I tried in vain to debug my own minidump files but ended up getting nowhere.

So far i have run MemTest over the weekend with 107 passes. I also ran Prime95 64-bit for 4 hours on each of the FFT tests without error.

I have enabled driver verifier (following the guide on this site) and this has not caused anynew BSOD's.

I also get a random BSOD on startup but it has happened so infrequently i have been unable to boot with disable automatic restart on system failure enabled to capture the stop code.

I really could do with some expert advice please.

This is my first post so i apologise if i have missed something important but i have tried to read as much info as possible before posting.

A:BSOD Ntoskrnl.exe+7efc0 and Ntoskrnl.exe+75c40

Unusual one you got there think it may be a windows problem please run sf tool and upload all files not just dumps and try running an sfc scan
SFC /SCANNOW Command - System File Checker option 2

Check system temperatures also

http://www.sevenforums.com/bsod-help-support/281212-bsod-ntoskrnl-exe-7efc0-ntoskrnl-exe-75c40.html
Relevancy 51.6%

Hi, I've been having this BSOD appear very randomly.

IRQL_NOT_LESS_OR_EQUAL 0x0000000a
(all reports in .rar file)

Sometimes within 1 hour, other times as long as 24hrs+. I've got my BIOS/Drivers up to date for my CPU, Graphics Card, and Motherboard. I've rigorously tested my memory and have never had any issues arise.

It has occurred during
3d gaming,
when the system has been idle,
also when browsing with firefox or ie.

Any help at all would be appreciated, I've struggled with this BSOD for years I would love to finally find whats causing it.

Thank you.

A:BSOD ntoskrnl.exe+26ee0 ntoskrnl.exe+7cc40

  
Quote: Originally Posted by postal


Hi, I've been having this BSOD appear very randomly.

IRQL_NOT_LESS_OR_EQUAL 0x0000000a
(all reports in .rar file)

Sometimes within 1 hour, other times as long as 24hrs+. I've got my BIOS/Drivers up to date for my CPU, Graphics Card, and Motherboard. I've rigorously tested my memory and have never had any issues arise.

It has occurred during
3d gaming,
when the system has been idle,
also when browsing with firefox or ie.

Any help at all would be appreciated, I've struggled with this BSOD for years I would love to finally find whats causing it.

Thank you.


First lets start with asacpi.sys yours dated 2005
1-ASACPI.SYS

The pre 2009 version of this driver is a known BSOD cause.

Please visit this link: ASUS teK Computer Inc. -Support- Drivers and Download P7P55D LE
ASUSTeK Computer Inc. -Support- Drivers and Download P7P55D LE

Scroll down to the Utilities category, then scroll down to the "ATK0110 driver for WindowsXP/Vista/Windows 7 32&64-bit" (it's about the 12th item down).
Download and install it.
Go to C:\Windows\System32\drivers to check and make sure that the ASACPI.SYS file is date stamped from 2009 or 2010 (NOT 2005).

http://www.sevenforums.com/bsod-help-support/194256-bsod-ntoskrnl-exe-26ee0-ntoskrnl-exe-7cc40.html
Relevancy 51.6%

Hello Recently I got a few bluescreens while playing World of Warcraft which I thought was very weird because all of my hardware is pretty new Here is some info about my computer Intel i - GHZ EVGA GTX SSC super superclocked - the fans are designed not to turn on until card reaches c gb Hyper X Fury ram tb WD Black HDD Windows OS At first I noticed three bluescreens then I used EVGA Precision X with a custom aggressive fan profile and BSOD ntoskrnl.exe+74ec0 ntoskrnl.exe address the problem went away temporarily but then the computer crashed later on I'm not sure if that's relevant or not I ran a diagnostic on my harddrive and processor and both were fine The RAM seems more difficult to test because it said something about usb drives so I decied to stray away from that unless it was absolutely necessary and then get help from someone who BSOD ntoskrnl.exe address ntoskrnl.exe+74ec0 knows what they're doing I am going to upload the dump files that were saved by bluescreenview Any help at all would be greatly appreciated

A:BSOD ntoskrnl.exe address ntoskrnl.exe+74ec0

CRITICAL_OBJECT_TERMINATION BSODs (0xf4) are usually related to an issue with the hard drive.

If you have an SSD, make sure that the firmware is upgraded.

If HDD, run SeaTools for DOS, LONG test - Hard Drive (HDD) Diagnostics - Sysnative Forums

Regards. . .

jcgriff2

`

http://www.techsupportforum.com/forums/f299/bsod-ntoskrnl-exe-address-ntoskrnl-exe-74ec0-975273.html
Relevancy 46.87%

Dear members...

My previous version of win7 kept on going BSOD so i installed a fresh copy. Specifically when using photoshop i continuously keep getting BSOD`s again. It seems photoshop runs fine, when not doing anything on the side..so i think.

I ran a HD test and recovered some bad sectors already. My cpu was bought as a amd xII phenom, but can be unlocked to become a x4.. and in stead of x16 multyplier i set it to 18 and was running stable at the time..

As i had lost the win7 install disk i took the win7 from my drive and i do recall this version being more unstable then the one i used to have on disk..



and here`s my dump file:
Dest Media | error 404

Who can tell me some insights ?

Also my core voltage`s seem to be on the low side..

http://www.sevenforums.com/bsod-help-support/388969-bcc-code-124-hall-dll-12a3b-ntoskernel-dll-18d563.html
Relevancy 45.58%

I keep getting BSODs when I play games for a short while At first I thought when BSOD says ntoskrnl.exe games. BSOD BlueScreenView caused playing it was a bad installation of Windows BSOD when playing games. BlueScreenView says ntoskrnl.exe caused BSOD so I did a clean format full of my SSD and a clean install of Windows Ultimate x Installation failed quite a few times before finally succeeding Tried another copy of Windows same install failures I finally finished reinstalling Windows on my PC I suspected the RAM to be at fault so I ran MemTest and found a ton of errors Upon closer inspection of the BIOS settings I found that my board was clocking my ram in Auto mode at mhz instead of the factory mhz Corsair Vengeance LP DDR CAS on Asus Sabertooth Z I updated my BIOS to the latest as of this posting and I still have to manually set the memory frequencies for it to run at mhz Everything seemed fine for a few hours running prime I supposed my PC was fine now after that clean install of Windows but a few minutes into playing Battlefield I BSOD I am no pro at reading dump files and I was hoping someone could help me isolate the sources of my BSODs I've attached the minidump files for each BSOD below Thanks

A:BSOD when playing games. BlueScreenView says ntoskrnl.exe caused BSOD

My system specs are:

Intel Core i7-3770
Asus Sabertooth Z77
Corsair Vengeance Low Profile DDR3 @1600mhz CAS9
Kingston HyperX 3k 120GB SSD (boot, Battlefield 3, Microsoft Office)
Asus DirectCUII GTX 670
Thermaltake Toughpower 1200 watt
Razer Blackwidow Ultimate
Cyborg RAT7 Mouse

http://www.sevenforums.com/bsod-help-support/240280-bsod-when-playing-games-bluescreenview-says-ntoskrnl-exe-caused-bsod.html
Relevancy 45.15%

Well didn't think i would be having any more issues pc been running fine since i fixed bad memory issues now all of a sudden i start getting this error ntoskrnl.exe+811b3 or that's all i can understand from log please if some 1 could take a look at my logs and help i would appreciate it i have stress tested my pc for a few hours after recovering last time and all seemed fine TIA

A:BSOD related to ntoskrnl.exe+811b3 after recovering from BSOD

Can i ask you to download this, http://go.microsoft.com/fwlink/?linkid=52012

Once downloaded please copy and past the information on here

This will help me analyze your problem further

I look forward to helping you.

http://www.sevenforums.com/bsod-help-support/346328-bsod-related-ntoskrnl-exe-811b3-after-recovering-bsod.html
Relevancy 44.29%

I have a Dell 1764 laptop, about 2years old, this month, got a new hard-drive with win7 preinstalled about a year and a half ago, from Dell.
Window 7 Home Premium x64.
added files.

A:BSOD, apx. every hour or so i BSOD, svchost/ntoskrnl + others

it will be 2yrs old this month*

http://www.sevenforums.com/bsod-help-support/213216-bsod-apx-every-hour-so-i-bsod-svchost-ntoskrnl-others.html
Relevancy 44.29%

Hello,
first thing: this is not my pc, so I have experienced just 1 of this bsod (chronologically the last one: this pc had 2 cd/dvd reader, 1 working and 1 not working, to do some tests, I disconnected the working one, at first start the broken one has worked but it gave me that BSOD).

Another info: after the 30/11 an external graphic card was installed (don't know which driver/version).

All the older BSOD (before the 21/01/2015) was not caused by me. I ask you, gently, to have a look at this dumps and help me to find the problem/s. Thank you

A:BSOD differents bsod ntoskrnl.exe in many months

Hello,
some days ago a friend took me his pc because he had got many BSOD (I posted yesterday about that with no luck), many of this BSOD are happened after I have installed in that pc an ATI HD 3650 PCI.

First test group on this machine (Acer T650-99TZ):
prime95: rounding was 0.5, expected less than 0.4 (after 2 minutes)
memtest86: many errors whit 2 stick of ram, 0 errors when testing the sticks singularly
Furmark: test passed with no errors (30 minutes)
hdtune: no errors

Second test group on second identical machine (Acer T650-99TZ + hdd, ram and gpu from the first machine)
prime95: rounding was 0.5, expected less than 0.4 (after 2 minutes)
memtest86: many errors whit 2 stick of ram, 0 error when testing the sticks singularly

Third test group on second and first machine (same hw except for the gpu: here I took out the HD 3650 and used the integrated gpu)
prime95: no errors (in 8 hours)
memtest86: no errors (100% passed)


Ram: 2x1gb 1Rx8 PC2-5300U 555-12 hymp112u64cp8-y5
CPU: Pentium 4 524
Obviously no overclock was made on this pc.
Obviously gpu drivers are up-to-date.

Now i'm trying to donwngrade the drivers of the GPU but I think this won't work, since the problem appear to be an incompatibility between the HD 3650 and the other hw.

Can anyone help me to solve this problem? Thanks

http://www.sevenforums.com/bsod-help-support/360195-bsod-differents-bsod-ntoskrnl-exe-many-months.html
Relevancy 42.57%

Greetings Firstly thank you in Ntoskrnl.exe BSOD advance for any help I receive with my problems I am not exactly the most computer savvy person and these blue screens are beginning to get me worried I have attached the file created by the DM log collector as requested With regards to the BSOD I am unable to replicate exactly what causes the crash They are totally random from my pc being idle to watching video and gaming My error codes are mostly x d but I have also had x e x a and a few more However of the errors point to notoskrnl exe bc With the small amount of research my BSOD Ntoskrnl.exe tech knowledge can sustain Im in the understanding that it might be a corrupted driver somwhere so I ran SlimDrivers This came back with multiple BSOD Ntoskrnl.exe updated including pci usb chipsets and prosessor drivers Is it possible to run these updates without affecting my overclock Let me know BSOD Ntoskrnl.exe if any further information is needed Thanks again for any help Ken

A:BSOD Ntoskrnl.exe

Hi Ken,

You have dump files going back for a year, I just went through the last few and you are right about it being driver related.

We don't recommend using any driver programs since they can often give you incorrect drivers and are usually hard to get rid of what else they bring with them.

I see your display driver pointed to a couple times,

Two different versions as well,


Code:
0: kd> lmvm nvlddmkm
start end module name
fffff880`08465000 fffff880`08f4a000 nvlddmkm T (no symbols)
Loaded symbol image file: nvlddmkm.sys
Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
Image name: nvlddmkm.sys
Timestamp: Fri Jun 21 02:06:16 2013 (51C41788)
CheckSum: 00AB87FF
ImageSize: 00AE5000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

Code:
start end module name
fffff880`0f403000 fffff880`1005b000 nvlddmkm T (no symbols)
Loaded symbol image file: nvlddmkm.sys
Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
Image name: nvlddmkm.sys
Timestamp: Tue Mar 04 03:07:52 2014 (5315B408)
CheckSum: 00C20523
ImageSize: 00C58000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Try using a different driver,

NVIDIA DRIVERS GeForce 334.89 Driver WHQL

Do a clean install of the display driver.
Uninstall All nvidia items in Control Panel > Programs and features3D Vision Control Driver
3D Vision Driver
Graphics Driver
HD Audio Driver
PhysX
nvidia Update
(Are you using nvidia chipset drivers? If so, dont uninstall anything other than those are listed).
Now follow Drivers - Clean Left over Files after Uninstalling
Install the driver again. While installing, Select Custom (Advanced) install. In the next page, follow this settings:



This may help as well,

NVIDIA Drivers - Avoid Problems

I also see your usb3 driver being flagged,


Code:
fffff880`0706a000 fffff880`0712f000 iusb3xhc T (no symbols)
Loaded symbol image file: iusb3xhc.sys
Image path: \SystemRoot\system32\DRIVERS\iusb3xhc.sys
Image name: iusb3xhc.sys
Timestamp: Mon May 21 00:21:40 2012 (4FB9ED04)
CheckSum: 000CA061
ImageSize: 000C5000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
You can update that from here,

https://downloadcenter.intel.com/Det...?DwnldID=21129

Let us know how things go from there.

http://www.sevenforums.com/bsod-help-support/331416-bsod-ntoskrnl-exe.html
Relevancy 42.57%

Hey, basically I've had this computer for a while and I always get the same error message:

On Thu 12/11/2009 11:37:32 your computer crashed
This was likely caused by the following module: ntoskrnl.exe
Bugcheck code: 0xA (0x10082, 0x2, 0x1, 0xFFFFF800028D2B13)
Error: IRQL_NOT_LESS_OR_EQUAL
Dump file: C:\Windows\Minidump\111209-18127-01.dmp
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft? Windows? Operating System
company: Microsoft Corporation
description: NT Kernel & System

It's always something similar to that but sometimes the actually "Error" is different.

I am currently on Windows 7 x64 and used to also get the same message.

I have the most up to date drivers and have had my PSU, Graphics Card and Hard drive changed...

After putting in a new hard drive yesterday, I did a clean install of Windows 7 but I am still getting the error. It occurs randomly but happens a lot when in games.

Anything I can do?

A:ntoskrnl.exe BSoD :(

Hey man,

I have the same error, my topic http://www.sevenforums.com/crashes-d...rnl-exe-2.html

I have no idea why, my BSOD's started few days ago. Tried everything to get rid of them, but can't.

http://www.sevenforums.com/bsod-help-support/38111-ntoskrnl-exe-bsod.html
Relevancy 42.57%

I'm have crashs 1-3 times a day and I'm getting a 0x19,0x1e,0x7f,0x50,0x4E,0x4E,0x3b,0a reasons for crash so can't figure out what is wrong. HP all the tell me is to restore but that is a real pain and then I don't I still don't know what is wrong.

A:BSOD ntoskrnl

  
Quote: Originally Posted by gjrewerts


I'm have crashs 1-3 times a day and I'm getting a 0x19,0x1e,0x7f,0x50,0x4E,0x4E,0x3b,0a reasons for crash so can't figure out what is wrong. HP all the tell me is to restore but that is a real pain and then I don't I still don't know what is wrong.


These crashes were caused by memory corruption (probably a driver). Please run these two tests to verify your memory and find which driver is causing the problem.

If you are overclocking anything reset to default before running these tests.
In other words STOP!!!
1-Memtest.





Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.



RAM - Test with Memtest86+

2-Driver verifier






Quote:
Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.


Driver Verifier - Enable and Disable
Further Reading
Using Driver Verifier to identify issues with Windows drivers for advanced users

http://www.sevenforums.com/bsod-help-support/207009-bsod-ntoskrnl.html
Relevancy 42.57%

BSOD started yesterday and happen most of the time when i used google chrome and when i ran a scan on MSE.

Windows 7 Ultimate 64 bit
MSI GX60
CPU:AMD A10-4600M
Graphic Card: AMD Radeon HD 7970M (2GB GDDR5)

Thank in advance and sorry for my bad grammar.

A:BSOD cause by ntoskrnl.exe

Hello Mistral.

Your crash dumps are not showing any finite probable cause.

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

If memtest comes free from errors, enable Driver Verifier to monitor the drivers.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.



   Information
Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.



   Warning
Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.



   Tip

If you fail to get on the Desktop because of DV, Boot into Advanced Boot Options > Safe mode. Disable DV there. Now boot normally again, and try following the instruction of enabling DV again.
If you cannot boot in Safe mode too, do a System Restore to a point you made earlier.

Let us know the results, with the subsequent crash dumps, if any.

Something is odd there .... about your BIOS date. We are having two different information about it.
One .... the date is 10/12/2012
The other ... the date is 10/12/2555
Have you done anything with the system date? If so, why? Let us know?

http://www.sevenforums.com/bsod-help-support/301480-bsod-cause-ntoskrnl-exe.html
Relevancy 42.57%

Hello Windows Ultimate x Retail Custom built in ' Moderate knowledge of technology mainly hardware I get technical BSOD's as I get minidumps but really my computer 'jolts' horizontal red and blue and white and black lines and then restarts This has been happening for a while and this is what I Ntoskrnl.exe BSOD have done thus far MemTest chkdsk f r I believe the f Ntoskrnl.exe BSOD is useless in that command but I use it anyway Replaced the mobo cpu gpu and psu BlueScreenView keeps telling me the main fault is ntoskrnl exe and I have also performed 'sfc scannow' with the result of quot found an error but can't correct it quot I'm not even going to bother submit any of my opinions on what it is or could be because I have tried everything to the best of my knowledge But I will let you know that it starts out one crash a day then a day then an hour If you would like updated minidumps they can be found Here The current set is in the attachments Any help would be very appreciated Thank you -Scott

A:Ntoskrnl.exe BSOD

What are the results of MemTest 86+? Any errors? You should do at least 7 passes





Quote:
'sfc /scannow' with the result of "found an error but can't correct it"


This suggest system corruption, do a Repair Install

http://www.sevenforums.com/bsod-help-support/175968-ntoskrnl-exe-bsod.html
Relevancy 42.57%

How do I fix this?

My crash dump file will be below.

http://dl.dropbox.com/u/5408759/051610-44585-01.dmp

A:ntoskrnl.exe BSOD

  
Quote: Originally Posted by iHistorical


How do I fix this?

My crash dump file will be below.

http://dl.dropbox.com/u/5408759/051610-44585-01.dmp



this one was

BugCheck A, {a7e7b5ec, 2, 1, fffff80002ee0275}
Probably caused by : avgtdia.sys ( avgtdia+1c430 )

There is absolutely no reference information on google but I can guess it is an AVG file. If so I would un-install it and replace it with microsoft security essentials.

Let us know if it is not

Ken

http://www.sevenforums.com/bsod-help-support/85462-ntoskrnl-exe-bsod.html
Relevancy 42.57%

I have been getting a couple of different BSOD's for the past few months, they seem to come and go, sometimes at startup, sometimes during high CPU tasks like some games. At first I thought it was my ram but I believe it may be a driver somewhere. I thought I could read and analyze my own dump files but I am far from an expert. Heres the required info

? OS - Windows 7
? x64 ?
? original installed OS: Windows 7
? full retail version
? Age of system: about 5 years
? Age of OS installation: 5 years also
? CPU: AMD Phenom(tm) II X4 955 Processor (4 CPUs), ~3.2GHz
? Video Card: NVIDIA GeForce GT 220
? MotherBoard: Asus M4A785-M
? Power Supply
-System Manufacturer:Ultra
-Exact model number ULT-LSP750P
Desktop

Thank you in advance!

A:ntoskrnl.exe BSOD

Hi,

PAGE_FAULT_IN_NONPAGED_AREA (50)

This indicates that invalid system memory has been referenced.

Bug check 0x50 usually occurs after the installation of faulty hardware or in the event of failure of installed hardware (usually related to defective RAM, be it main memory, L2 RAM cache, or video RAM).

Another common cause is the installation of a faulty system service.

Antivirus software can also trigger this error, as can a corrupted NTFS volume.


Code:

1: kd> k
Child-SP RetAddr Call Site
fffff880`06af8fb8 fffff800`0303e54c nt!KeBugCheckEx
fffff880`06af8fc0 fffff800`030942ee nt! ?? ::FNODOBFM::`string'+0x456df
fffff880`06af9120 fffff880`13215f7d nt!KiPageFault+0x16e
fffff880`06af92b8 fffff880`132433b9 nvlddmkm+0x1daf7d
fffff880`06af92c0 fffffa80`08df6000 nvlddmkm+0x2083b9
fffff880`06af92c8 00000000`00000030 0xfffffa80`08df6000
fffff880`06af92d0 fffffa80`08df6000 0x30
fffff880`06af92d8 fffffa80`0e51c160 0xfffffa80`08df6000
fffff880`06af92e0 00000000`00000001 0xfffffa80`0e51c160
fffff880`06af92e8 fffff880`135f2ee0 0x1
fffff880`06af92f0 fffffa80`00000000 nvlddmkm+0x5b7ee0
fffff880`06af92f8 00000000`00000001 0xfffffa80`00000000
fffff880`06af9300 00000000`00000000 0x1
The nVidia video driver is referencing invalid memory.

------------------------------

1. Uninstall MagicISO ASAP, old drivers.

2. Ensure you have the latest video card drivers. If you are already on the latest video card drivers, uninstall and install a version or a few versions behind the latest to ensure it's not a latest driver only issue. If you have already experimented with the latest video card driver and many previous versions, please give the beta driver for your card a try.

3. Uninstall Asus PC Probe/AI Suite, as well as any other installed Asus bloatware.

Regards,

Patrick

http://www.techsupportforum.com/forums/f299/ntoskrnl-exe-bsod-876257.html
Relevancy 42.57%

I've bought this laptop last year. After using the laptop for a week, the bsod had shown up. Until now, the bsod have been critical since its sometime occur 2-3 times in 30 mins. I hope you can help me to solve this problem thank you 
 
-Windows 10 Home x64,
-The laptop originally running on Windows 8.1. I've upgrade to Windows 10, 4 months after using this laptop.
 
Intel® Core™ i5-5200U CPU @ 2.20GHz;
AMD Radeon R5 M330 & Intel HD Graphic 5500;
Lenovo G50-80 (80E5);

A:What cause the ntoskrnl.exe bsod? Help!

There's only 1 memory dump in the uploaded reports.If using a disk cleaner (such as CCleaner), please stop while we're troubleshooting. Your UEFI/BIOS (version B0CN97WW) dates from 2016.  Please check at the manufacturer's website to see if there are any UEFI/BIOS updates available for your system.  This is just in case there has been a recent update.Only 5 Windows Update hotfixes installed.  Most build 10586 (TH2/1511) systems have more than this.  Please visit Windows Update and get ALL available Windows Updates.The actual number is not important.  Rather it's important that you checked manually, installed any available updates, and didn't experience any errors when checking or updating.Beyond this, as there was only 1 memory dump in the upload, I have these 4 suggestions:1.  Get ALL available Windows Updates.  It may take several trips to get them all2.  Get ALL available, compatible updates for your OS from the manufacturer's website (to include BIOS/UEFI).3.  Start with these free hardware diagnostics:  http://www.carrona.org/hwdiag.html4.  If all of the hardware tests pass, then run Driver Verifier according to these instructions:  http://www.carrona.org/verifier.html FYI - the memory dumps listed in the WER section of the MSINFO32 report appear to be random errors.Most random errors are due to (in this order on systems that were updated to W10):  hardware problems, compatibility issues, low-level driversThe hardware diagnostics will get a start on seeing if it's hardware, and the Driver Verifier should point out if it's a low-level driver (or maybe even a compatibility issue).Good luck! Analysis:The following is for information purposes only. The following information contains the relevant information from the blue screen analysis:**************************Fri May 27 01:56:55.416 2016 (UTC - 4:00)**************************Loading Dump File [C:\Users\john\SysnativeBSODApps\052716-17968-01.dmp]Windows 10 Kernel Version 10586 MP (4 procs) Free x64Built by: 10586.103.amd64fre.th2_release.160126-1819System Uptime:0 days 0:31:51.205*** WARNING: Unable to verify timestamp for win32kfull.sys*** ERROR: Module load completed but symbols could not be loaded for win32kfull.sysProbably caused by :win32kbase.sys ( win32kbase!GreValidateRgnInDCSurfBounds+b1 )BugCheck 50, {fffff901b46ab2b8, 0, fffff960e13bebb1, 2}BugCheck Info: PAGE_FAULT_IN_NONPAGED_AREA (50)Arguments:Arg1: fffff901b46ab2b8, memory referenced.Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.Arg3: fffff960e13bebb1, If non-zero, the instruction address which referenced the bad memory    address.Arg4: 0000000000000002, (reserved)BUGCHECK_STR:  AVDEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULTPROCESS_NAME:  explorer.exeFAILURE_BUCKET_ID: AV_R_INVALID_win32kbase!GreValidateRgnInDCSurfBoundsCPUID:        "Intel® Core™ i5-5200U CPU @ 2.20GHz"MaxSpeed:     2200CurrentSpeed: 2195  BIOS Version                  B0CN97WW  BIOS Release Date             01/08/2016  Manufacturer                  LENOVO  Product Name                  80E5  Baseboard Product             Lenovo G50-80¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨... Read more

http://www.bleepingcomputer.com/forums/t/615525/what-cause-the-ntoskrnlexe-bsod-help/
Relevancy 42.57%

Hi All I have a server which is crashing and cannot find a suitable solution I have been looking ntoskrnl.exe hal.dll BSOD & around and hopefully someone here might be able to help me out The errors I am getting repeatedly from 'who crashed' are as follows windows version Windows Server R build windows dir C Windows CPU GenuineIntel Intel R Xeon R CPU X GHz Intel level logical processors active mask RAM total VM free -------------------------------------------------------------------------------- Crash Dump Analysis -------------------------------------------------------------------------------- BSOD ntoskrnl.exe & hal.dll Crash dump directory C Windows Minidump Crash dumps are enabled on your computer On Tue GMT your computer crashed crash dump file C Windows Minidump - - dmp This was probably caused by the following module ntoskrnl exe nt x Bugcheck code x xB x x x Error WHEA INTERNAL ERROR file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description BSOD ntoskrnl.exe & hal.dll NT Kernel amp System Bug check description This bug check indicates that an internal error in the Windows Hardware Error Architecture WHEA has occurred Errors can result from a bug in the implementation of a platform-specific hardware error driver PSHED plug-in supplied by a vendor the firmware implementation of error records or the firmware implementation of error injection This is likely to be caused by a hardware problem problem This problem might be caused by a thermal issue The crash took place in the Windows kernel Possibly this problem is caused by another driver which cannot be identified at this time On Tue GMT your computer crashed crash dump file C Windows memory dmp This was probably caused by the following module hal dll hal HalHandleNMI x Bugcheck code x xB x x x Error WHEA INTERNAL ERROR file path C Windows system hal dll product Microsoft Windows Operating System company Microsoft Corporation description Hardware Abstraction Layer DLL Bug check description This bug check indicates that an internal error in the Windows Hardware Error Architecture WHEA has occurred Errors can result from a bug in the implementation of a platform-specific hardware error driver PSHED plug-in supplied by a vendor the firmware implementation of error records or the firmware implementation of error injection This is likely to be caused by a hardware problem problem This problem might be caused by a thermal issue The crash took place in a standard Microsoft module Your system configuration may be incorrect Possibly this problem is caused by another driver on your system which cannot be identified at this time All fans are wokring correctly so I doubt it is a thermal issue I have run the WINNT tool and have attached the output to this posting many thanks in advance

A:BSOD ntoskrnl.exe & hal.dll

You have lots of hardware BSOD that point to your Intel processor driver. I would like you to run some tests and report back the results

1. Memtest86 - Run for 7-8 passes - RAM - Test with Memtest86+
2. Prime95 - Run all three tests for 3-4 hours each or until fail - http://www.sevenforums.com/tutorials...t-prime95.html

Also update your network drivers

Code:
fetn62a.sys Fri Aug 06 04:27:32 2010 (4C5BC774)
http://www.viaarena.com/Driver/rhine_win7_v1.15a.zip
BSOD BUGCHECK SUMMARY

Code:

Built by: 7600.16695.amd64fre.win7_gdr.101026-1503
Debug session time: Tue May 3 04:36:37.138 2011 (UTC - 4:00)
System Uptime: 0 days 0:07:32.952
*** WARNING: Unable to verify timestamp for intelppm.sys
*** ERROR: Module load completed but symbols could not be loaded for intelppm.sys
Probably caused by : intelppm.sys ( intelppm+39c2 )
BUGCHECK_STR: 0x122
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0x122_intelppm+39c2
BiosReleaseDate = 06/16/2009
SystemManufacturer = Intel Corporation
SystemProductName = S3210SH
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16695.amd64fre.win7_gdr.101026-1503
Debug session time: Tue May 3 04:27:00.805 2011 (UTC - 4:00)
System Uptime: 0 days 1:13:35.675
*** WARNING: Unable to verify timestamp for intelppm.sys
*** ERROR: Module load completed but symbols could not be loaded for intelppm.sys
Probably caused by : intelppm.sys ( intelppm+39c2 )
BUGCHECK_STR: 0x122
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0x122_intelppm+39c2
BiosReleaseDate = 06/16/2009
SystemManufacturer = Intel Corporation
SystemProductName = S3210SH
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16695.amd64fre.win7_gdr.101026-1503
Debug session time: Tue May 3 03:11:18.073 2011 (UTC - 4:00)
System Uptime: 2 days 21:41:10.231
*** WARNING: Unable to verify timestamp for intelppm.sys
*** ERROR: Module load completed but symbols could not be loaded for intelppm.sys
Probably caused by : intelppm.sys ( intelppm+39c2 )
BUGCHECK_STR: 0x122
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0x122_intelppm+39c2
BiosReleaseDate = 06/16/2009
SystemManufacturer = Intel Corporation
SystemProductName = S3210SH
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16695.amd64fre.win7_gdr.101026-1503
Debug session time: Sat Apr 30 05:28:02.557 2011 (UTC - 4:00)
System Uptime: 3 days 2:14:14.906
*** WARNING: Unable to verify timestamp for intelppm.sys
*** ERROR: Module load completed but symbols could not be loaded for intelppm.sys
Probably caused by : intelppm.sys ( intelppm+39c2 )
BUGCHECK_STR: 0x122
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0x122_intelppm+39c2
BiosReleaseDate = 06/16/2009
SystemManufacturer = Intel Corporation
SystemProductName = S3210SH
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16695.amd64fre.win7_gdr.101026-1503
Debug session time: Wed Apr 27 03:11:40.303 2011 (UTC - 4:00)
System Uptime: 6 days 23:47:48.308
*** WARNING: Unable to verify timestamp for intelppm.sys
*** ERROR: Module load completed but symbols could not be loaded for intelppm.sys
Probably caused by : intelppm.sys ( intelppm+39c2 )
BUGCHECK_STR: 0x122
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0x122_intelppm+39c2
BiosReleaseDate = 06/16/2009
SystemManufacturer = Intel Corporation
SystemProductName = S3210SH
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16695.amd64fre.win7_gdr.101026-1503
Debug session time: Wed Apr 20 03:21:48.200 2011 (UTC - 4:00)
System Uptime: 0 days 23:40:29.167
*** WARNING: Unable to verify timestamp for intelppm.sys
*** ERROR: Module load completed but symbols could not be loaded for intelppm.sys
Probably caused by : intelppm.sys ( intelppm+39c2 )
BUGCHECK_STR: 0x122
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0x122_intelppm+39c2
BiosReleaseDa... Read more

http://www.sevenforums.com/bsod-help-support/160873-bsod-ntoskrnl-exe-hal-dll.html
Relevancy 42.57%

Hi everyone,

I got a Dell xps1340 a few weeks ago, and after a week a faced a bsod. After 3 crashes, motherboard and memory were exchanged, but BSOD happened again. Then harddrive was changed, but BSOD again...

do you have any idea what can i do?

thx

atesz

A:BSOD maybe ntoskrnl.exe

I forgot to mention: I use avast and Zonealarm (if this helps....)

http://www.sevenforums.com/bsod-help-support/84211-bsod-maybe-ntoskrnl-exe.html
Relevancy 42.57%

I looked at my minidumps and all I see are:
hal.dll
ntoskrnl.exe
tcpip.sys
ntoskrnl.exe
..... < dots mean same as above
.....
.....
Unknown_Module_0000...
ntoskrnl.exe
.....
.....
dxgkrnl.sys
ntoskrnl.exe
.....

So...Whats the next step...I see these minidumps, but I don't know what to do now.

A little background information on my problems:
When I boot up my computer in the morning normally it freezes and I have to restart the computer 5 times or so before it stops freezing. Then I get a bsod about 5 minutes after being on the desktop. After a while the BSODs become less frequent and finally stop at the end of the night. Then back to square one in the morning. Can anybody help me out?

A:BSOD ntoskrnl.exe

  
Quote: Originally Posted by Stuntabeck


I looked at my minidumps and all I see are:
hal.dll
ntoskrnl.exe
tcpip.sys
ntoskrnl.exe
..... < dots mean same as above
.....
.....
Unknown_Module_0000...
ntoskrnl.exe
.....
.....
dxgkrnl.sys
ntoskrnl.exe
.....

So...Whats the next step...I see these minidumps, but I don't know what to do now.

A little background information on my problems:
When I boot up my computer in the morning normally it freezes and I have to restart the computer 5 times or so before it stops freezing. Then I get a bsod about 5 minutes after being on the desktop. After a while the BSODs become less frequent and finally stop at the end of the night. Then back to square one in the morning. Can anybody help me out?


You have a few problems that need to be fixed

1-Kaspersky and Norton both are known causes of BSOD's on some systems. I would remove them and replace with Microsoft Security essentials

http://support.kaspersky.com/downloa...vremover10.zip

http://us.norton.com/support/kb/web_...080710133834EN

Virus, Spyware & Malware Protection | Microsoft Security Essentials
2- Some of these (6 of 16) were blamed directly on memory management. Please run these two tests to verify your memory and determmine which driver is causing the problem
****-Memtest.

*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

RAM - Test with Memtest86+

*****-Driver verifier






Quote:
I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.


Driver Verifier - Enable and Disable
3-Several of these crashes were Related to Rt64win7.sys 8101E/8168/8169 NDIS 6.20 64-bit Driver from Realtek Corporation. I would re-install the newest version available.

How To Find Drivers:




Quote:
- search Google for the name of the driver
- compare the Google results with what's installed on your system to figure out which device/program it belongs to
- visi... Read more

http://www.sevenforums.com/bsod-help-support/192438-bsod-ntoskrnl-exe.html
Relevancy 42.57%

Hi there I've recently built a PC and I've been plagued by the very start - BSOD ntoskrnl.exe with a BSOD which points to ntoskrnl exe It's peculiar in that it only seems to BSOD - ntoskrnl.exe happen when the system has been loaded up and first displays the desktop Not necessarily instantly but within the first two minutes or so If it hasn't happened by BSOD - ntoskrnl.exe then it won't happen at all as long as the computer stays on As it's a new PC I suspect it could be hardware but I have ran MemTest for over six passes and received no problems I'm also receiving crashes on a game related to my graphics card which makes me wonder if it's faulty RAM on the graphics card itself As a note I did have the latest version of my graphics drivers when the BSOD occurred but reverted to a previous version afterward to see if that was the problem It wasn't Anyway here are my specs CPU Intel Core i - CPU GHz GPU AMD Radeon HD Series Motherboard Gigabyte GA-Z AP-D Z Socket RAM Corsair GB x GB DDR MHz PSU w OCR StealthStream OS Windows Ultimate x Thanks for any help you can provide

Relevancy 42.57%

Bought this computer a week ago. But when running some games i get a bluescreen, not all games. Heroes of Newerth works great. But games like Orcs must die crashes after a few min.

What can be wrong? Been reading alot on forums, but so many different answers..
I've attached some minidumps.

Please help :P

A:BSOD! ntoskrnl.exe Help

Hi Hantimilon welcome to SF

Update your Reclusa Keyboard software\driver.
http://www.microsoft.com/hardware/en-us/downloads

Download and install Driver Sweeper

Download the most recent software\driver for your NVIDIA

Uninstall nvidia software\driver,restart in safe mode,run driver sweeper,choose only NVIDIA-Display and clean,restart in normal mode.

Install the new ati software\driver,restart.

Update DirectX

Run http://www.sevenforums.com/tutorials...test-occt.html

Finish with these steps and post back here the results.

http://www.sevenforums.com/bsod-help-support/192442-bsod-ntoskrnl-exe-help.html
Relevancy 42.57%

Hi Would it be possible for somebody to assist with some BSOD's I have had recently Over the last week I have had BSOD's and I think that they are occurring on the wake-up from sleep mode when my PC used as a media center wakes up to do something - I have ntoskrnl.exe BSOD - not yet had it occur while I am actually using the machine I have attached the info as described in the BSOD reporting post - it is the last memory dumps which I am concerned about that occurred over the last week - the earlier ones were issues with initial setup I think Details of install Win Home Premium x Full Retail version Fresh install on new hard disk about year ago - only recently last few weeks switched over fully to Win - was dual booting into Win XP until I had Win all setup right System hardware is a - years old apart from Tb hard disk which is year old Many thanks for any help you can give mski

A:BSOD - ntoskrnl.exe

The dump points to a device object, which maps to hcw95bda.sys via usbhub.sys:

Code:
0: kd> lmvm hcw95bda
start end module name
fffff880`052f5000 fffff880`0539a000 hcw95bda T (no symbols)
Loaded symbol image file: hcw95bda.sys
Image path: \SystemRoot\System32\Drivers\hcw95bda.sys
Image name: hcw95bda.sys
Timestamp: Mon Jul 06 15:32:35 2009 (4A525153)
CheckSum: 000B06A6
ImageSize: 000A5000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
That driver appears to be for a Hauppauge Wintv Nova TV card, which has some BSOD issues even under XP using that particular driver. Apparently this was to be fixed with the 1.5.0.1 driver version (and newer, of course - the problem apparently is detection of the card on resume causing the crash). You'll need to update to the latest driver from Hauppage, here:
Hauppauge Computer Works Ltd : Support

http://www.sevenforums.com/bsod-help-support/155224-bsod-ntoskrnl-exe.html
Relevancy 42.57%

Sorry, i haven't noticed where i was. Got 4 BSOD with

the last i got) IRQL_NOT_LESS_OR_EQUAL with ntoskrnl.exe+7fd00

SYSTEM_SERVICE_EXCEPTION ntoskrnl.exe+6f840

MEMORY_MANAGEMENT ntoskrnl.exe+71f00

The first) MEMORY_MANAGEMENT ntoskrnl.exe+71f00

Don't have any ideas on the cause, tjis is a new computer

Thanks for your help

A:BSOD with ntoskrnl

The last one arrived while windows update was running.

Thanka

http://www.sevenforums.com/bsod-help-support/376765-bsod-ntoskrnl.html
Relevancy 42.57%

I've suddenly suffered a spate of BSODs. I've never experienced a BSOD on this machine (up to this point) and haven't installed anything lately (hardware or software...to my knowledge).

System specs:
- Windows 7
- x64
- Original OS install
- OEM version that I purchased retail
- 2 year old hardware
- 2 year old OS install
- Intel Core i7 CPU 950 @ 3.07Ghz
- NVIDIA Quadro FX 1800
- ASUS P6X58D ATX Motherboard
- Corsair CMPSU-750TX 750-Watt TX Series 80 Power Supply
- Homebrew system

I've tried to diagnose the problem on my own. Memtest didn't reveal any issues. CPU temps are nominal. The minidump points to NTOSKRNL.exe but I realize that's a common default label.

Windows7_Vista_jcgriff2 and Performance check results are attached.

THANK YOU in advance for helping me resolve this problem.

A:BSOD -> NTOSKRNL.exe -> ???

ASACPI.sys Sun Mar 27 22:30:36 2005
Asus ATK0110 ACPI Utility (a known BSOD maker in Win7). Also a part of the Asus PCProbe and AISuite Utilities.

From 2005 it's a XP driver D/L the 2010 version of Asus AI suite listed under Utilities here> ASUSTeK Computer Inc. -Support- Drivers and Download P6X58D Premium

RimSerial_AMD64.sys Mon Nov 24 12:01:01 2008 is a Blackbery device Virtual Serial Port driver Check for a update with Blackberry > Research In Motion - Products

aw_host5.sys Mon Feb 19 05:35:33 2007 (45D97D75)
awechodd.dll Mon Feb 26 10:09:40 2007 (45E2F834)
awechomd.sys Mon Feb 19 05:35:10 2007 (45D97D5E)
Symantec pcAnywhere Host driver again pre 2008 means they are not Win7 drivers.> http://us.norton.com/support/dtree.jsp

dfmirage.sys Fri Jan 11 16:04:26 2008
DemoForge Mirage Driver (DFMirage video hook driver)

The actual dumps themselves don't tell us a lot as they are all different processes named, usually this means there is a rouge driver in the system overwriting it's own address space into another drivers space which is then calling for the stop or hardware causing corruption, try updating the drivers above is still no good we can try running driver verifier.

BSOD BUGCHECK SUMMARY


Code:

Debug session time: Sun Sep 16 19:04:46.570 2012 (UTC - 4:00)
Loading Dump File [C:\Users\Owner\Bsodapps\091612-17362-01.dmp]
System Uptime: 0 days 2:16:56.600
BugCheck 50, {fffffa8061bc376b, 0, fffff80002cc7d7f, 5}
Probably caused by : memory_corruption ( nt!MiAgeWorkingSet+425 )
Bugcheck code 00000050
Arguments fffffa80`61bc376b 00000000`00000000 fffff800`02cc7d7f 00000000`00000005
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x50
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0x50_nt!MiAgeWorkingSet+425
MaxSpeed: 3070
CurrentSpeed: 3073
BiosVersion = 0703
BiosReleaseDate = 02/24/2010
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
??????????????????????????????????????????????????????????????????????????????????????``
Debug session time: Sun Sep 16 16:46:46.148 2012 (UTC - 4:00)
Loading Dump File [C:\Users\Owner\Bsodapps\091612-15880-01.dmp]
System Uptime: 0 days 1:06:38.178
BugCheck A, {800000028, 2, 1, fffff80002c9757d}
Probably caused by : win32k.sys ( win32k!SetWakeBit+f8 )
Bugcheck code 0000000A
Arguments 00000008`00000028 00000000`00000002 00000000`00000001 fffff800`02c9757d
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0xA
PROCESS_NAME: ActSage.exe
FAILURE_BUCKET_ID: X64_0xA_win32k!SetWakeBit+f8
MaxSpeed: 3070
CurrentSpeed: 3073
BiosVersion = 0703
BiosReleaseDate = 02/24/2010
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
??????????????????????????????????????????????????????????????????????????????????????``
Debug session time: Fri Sep 14 18:13:18.607 2012 (UTC - 4:00)
Loading Dump File [C:\Users\Owner\Bsodapps\091412-16161-01.dmp]
System Uptime: 0 days 11:31:46.638
BugCheck 50, {fffff890033bf110, 0, fffff880016cf527, 5}
Probably caused by : Ntfs.sys ( Ntfs!NtfsFindPrefixHashEntry+1fe )
Bugcheck code 00000050
Arguments fffff890`033bf110 00000000`00000000 fffff880`016cf527 00000000`00000005
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x50
PROCESS_NAME: crashreporter.
FAILURE_BUCKET_ID: X64_0x50_Ntfs!NtfsFindPrefixHashEntry+1fe
MaxSpeed: 3070
CurrentSpeed: 3073
BiosVersion = 0703
BiosReleaseDate = 02/24/2010
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
??????????????????????????????????????????????????????????????????????????????????????``
Debug session time: Sat Sep 8 21:20:27.703 2012 (UTC - 4:00)
Loading Dump File [C:\Users\Owner\Bsodapps\090812-15693-01.dmp]
System Uptime: 0 days 0:07:48.607
BugCheck 4E, {99, a9ca3, 0, aa823}
Probably caused by : memory_corruption ( nt!MiBadShareCount+4c )
Bugcheck code 0000004E
Arguments 00000000`00000099 00000000`000a9ca3 00000000`0... Read more

http://www.techsupportforum.com/forums/f299/bsod-ntoskrnl-exe-666207.html
Relevancy 42.57%

I have been getting BSOD for a few months now. They occur totally randomly, sometimes up to 8 hours after I begin using my computer, sometimes in as little time as five minutes. I have updated all my drivers and run the windows memory check so I believe the problem does not lie there. All the errors have cited "ntoskrnl.exe" as the main cause of issue. Please help me fix my problem. The attached screenshots are the report created for one specific instance of the occurrence.

I am relatively unskilled when it comes to troubleshooting, so please walk me through everything I must do. Thanks a ton!

A:BSOD regarding ntoskrnl.exe

Fist of all, you have to post it following the Blue Screen of Death (BSOD) Posting Instructions.

http://www.sevenforums.com/bsod-help-support/279233-bsod-regarding-ntoskrnl-exe.html
Relevancy 42.57%

I'm not too tech-savvy, but lately there's been a lot of BSODs. These past 3 days actually. I had BSODs about a month before, but it ran about a month pretty well.

I'll just post my info and stuff ! And hope someone can help!

Thanks in advance!

EDIT: Forgot my system specs!

64 Bit Windows 7

Clean first install, purchased from retail, did not have previous OS.

Been about 3 months I've had this computer for.

AMD Phenom II X6 1035T Processor with a M5A97 Asus motherboard.

Also my graphics card is a GTX550TI 2GB.

I have 2 4GB Ram

A:ntoskrnl.exe BSOD

You have both Microsoft Security Essentials and avast! installed. Please remove one of these programs. Having two security programs that accomplish similar tasks can lead to crashes due to them accessing the same system files or system resources simultaneously.
The crashes themselves indicate network problems (probably due to the two antivirus programs) and graphics card driver issues.

Re-install or install the latest drivers for your display card. Your current drivers may be corrupt and/or outdated. Use the following method to re-install the drivers.
Download the drivers you want for your display card(s)
Click Start Menu
Click Control Panel
Click Uninstall a program
For NVIDIA:Uninstall the NVIDIA Graphics Driver (this should uninstall all NVIDIA software and drivers)
Restart your computer
Make sure NVIDIA 3D Vision Driver, NVIDIA 3D Vision Video Player, NVIDIA HD Audio Driver, and NVIDIA PhysX System Software are not still listed under Uninstall a program through Control Panel
If any remain of the above, uninstall one at a time
If asked to restart after uninstalling any of the above, do so, and continue uninstalling any remaining NVIDIA items until all are removed

For AMD:Uninstall AMD Catalyst Install Manager if it is listed (this should remove all AMD graphics software and drivers)
If AMD Catalyst Install Manager is not listed, use the following method to uninstall the graphics drivers:Click Start Menu
Right Click My Computer/Computer
Click Manage
Click Device Manager from the list on the left
Expand Display adapters
Do the following for each adapter (in case you have multiple display cards)Right click the adapter
Click Uninstall (do not click OK in the dialog box that pops up after hitting Uninstall)
Put a tick in Delete driver software for this device (if this option is available, otherwise just hit OK) and hit OK

Alternatively:Login as an adminstrative user
Click Start Menu
Click Control Panel
Click Hardware and Sound
Click Device Manager (the last link under Devices and Printers)
Expand Display adapters
Do the following for each adapter (in case you have multiple display cards)Right click the adapter
Click Uninstall (do not click OK in the dialog box that pops up after hitting Uninstall)
Put a tick in Delete driver software for this device (if this option is available, otherwise just hit OK) and hit OK

Restart your computer after uninstalling drivers for all display cards
Install the driver you selected for the display cards once Windows starts

http://www.sevenforums.com/bsod-help-support/230442-ntoskrnl-exe-bsod.html
Relevancy 42.57%

Hello,
Just received a new hard drive and installed windows 7. So here i was downloading drivers and programs and some games. While i was playing my game (maybe 5 mins in) i get the blue screen and after that i would get it randomly with different codes every time and sometimes multiple files were effected but with ntoskrnl.exe appearing in every one. I grow tiresome of this problem and i can't seem to find my answer through the other topics. I have tried the check disk thing and i found no problems with my memory using the program off of my windows cd. How do i got about fixing this problem?

OS = Win 7 ultimate 64 bit

A:BSOD ntoskrnl.exe need help.

  
Quote: Originally Posted by Skullpanda


Hello,
Just received a new hard drive and installed windows 7. So here i was downloading drivers and programs and some games. While i was playing my game (maybe 5 mins in) i get the blue screen and after that i would get it randomly with different codes every time and sometimes multiple files were effected but with ntoskrnl.exe appearing in every one. I grow tiresome of this problem and i can't seem to find my answer through the other topics. I have tried the check disk thing and i found no problems with my memory using the program off of my windows cd. How do i got about fixing this problem?

OS = Win 7 ultimate 64 bit


You have about five different causes. with that many I have to think there is something hardware related at the root off all these.

First several were caused by your video driver. You need to uninstall completely the current driver and then instalal just the fresh driver and not all the other junk.

A few were caused by you network driver rtwin7.sys. Just install a fresh copy.

Since some of these seem to be caused by system files I would run a system file check
(type cmd in search>right click and run as admin>sfc /scannow)

Lete us know the results

Ken


Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\K\Desktop\Minidump\050710-20810-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\symbols*http://msdl.microsoft.com/download/symbols;srv*e:\symbols
*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0xfffff800`02849000 PsLoadedModuleList = 0xfffff800`02a86e50
Debug session time: Fri May 7 20:59:49.283 2010 (GMT-4)
System Uptime: 0 days 0:07:00.735
Loading Kernel Symbols
...............................................................
................................................................
..................
Loading User Symbols
Loading unloaded module list
....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1E, {0, 0, 0, 0}

Probably caused by : amdppm.sys ( amdppm!C1Halt+2 )

Followup: MachineOwner
---------

2: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

KMODE_EXCEPTION_NOT_HANDLED (1e)
This is a very common bugcheck. Usually the exception address pinpoints
the driver/function that caused the problem. Always note this address
as well as the link date of the driver/image that contains this address.
Arguments:
Arg1: 0000000000000000, The exception code that was not handled
Arg2: 0000000000000000, The address that the exception occurred at
Arg3: 0000000000000000, Parameter 0 of the exception
Arg4: 0000000000000000, Parameter 1 of the exception

Debugging Details:
------------------
EXCEPTION_CODE: (Win32) 0 (0) - The operation completed successfully.

FAULTING_IP:
+66c2952f0335d9d0
00000000`00000000 ?? ???

EXCEPTION_PARAMETER1: 0000000000000000

EXCEPTI... Read more

http://www.sevenforums.com/bsod-help-support/83464-bsod-ntoskrnl-exe-need-help.html
Relevancy 42.57%

I have been getting at least one BSOD every day for the past few months and only recently has it gotten really bad. I can barely do anything when i turn on my PC before it crashes. I have the log from dm log collector here. if you need anymore information please ask.

Specs:
intel i3 3790
Sapphire radeon 7850 2gb
8g Gskill ripjaws RAM
GIGABYTE: Z87M-D3H
Corsair cx 500 watt power supply
Windows 7 hoem premium 64 bit

A:ntoskrnl.exe BSOD

Test your HDD using Data Lifeguard Diagnostic for Windows. Take both the short test and the extended test. Let us know the results.
_________________________________________________________

Code:
BugCheck F4, {3, fffffa8008f34b30, fffffa8008f34e10, fffff800031c1940}

----- ETW minidump data unavailable-----
Probably caused by : wininit.exe

Followup: MachineOwner
---------

http://www.sevenforums.com/bsod-help-support/369117-ntoskrnl-exe-bsod.html
Relevancy 42.57%

Hello everybody!

During the past weeks I seem to be getting at least one BSOD per day related to ntoskrnl.exe (Almost all of them while gaming). I tried to debug it myself using windbg and bluescreenview but maybe I was doing something wrong as I can't pinpoint what is causing the system to BSOD.
I have attached the output from the BSOD Dump & System File Collection app as described in one of the tutorial threads.
Additionally, I let memtest run over night but no errors were found.

Thank you all in advance for your help!

Please let me know if you need more information to help me solve this.

Below are my system specs:
OS : Microsoft Windows 7 Ultimate // Version 6.1.7601 Service Pack 1 Build 7601
CPU: i7-2600k @ 4.3 GHz ( 43 x 100)
MB: p8p67 Pro (1606 Bios)
RAM: 8GB (4 x 2GB Kingston)
GPU: GTX 460 1GB

A:BSOD (ntoskrnl.exe)

Welcome to Seven Forums.

The dump files point to:
STOP 0x0000003B: SYSTEM_SERVICE_EXCEPTION
Usual causes: System service, Device driver, graphics driver, ?memory
The listed cause is memory_corruption.

Run memtest86+, leave all the RAM cards installed and run it for a full 7 passes, this will take several hours, best to run it overnight.
If you get any errors, you can stop the test,

RAM - Test with Memtest86+



Code:

*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff80003407f9c, Address of the instruction which caused the bugcheck
Arg3: fffff8800c191f10, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.
Debugging Details:
------------------

EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
FAULTING_IP:
nt!ExFreePoolWithTag+20c
fffff800`03407f9c 8c10 mov word ptr [rax],ss
CONTEXT: fffff8800c191f10 -- (.cxr 0xfffff8800c191f10)
rax=00000000000002a0 rbx=fffffa800a99b7d0 rcx=0000000000001d10
rdx=fffff880009cf180 rsi=0000000000000002 rdi=0000000000000000
rip=fffff80003407f9c rsp=fffff8800c1928f8 rbp=0000000000000000
r8=000000000000e880 r9=0000000000000080 r10=fffff8000325c000
r11=00000000000005d0 r12=0000000000000008 r13=fffffa800a99b7e0
r14=0000000000000000 r15=fffff80003463340
iopl=2 nv up di pl zr na pe cy
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00016143
nt!ExFreePoolWithTag+0x20c:
fffff800`03407f9c 8c10 mov word ptr [rax],ss ds:002b:00000000`000002a0=????????
Resetting default scope
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: CODE_CORRUPTION
BUGCHECK_STR: 0x3B
PROCESS_NAME: APB.exe
CURRENT_IRQL: 0
LAST_CONTROL_TRANSFER: from 0000000000000000 to fffff80003407f9c
STACK_TEXT:
fffff880`0c1928f8 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!ExFreePoolWithTag+0x20c

CHKIMG_EXTENSION: !chkimg -lo 50 -d !nt
fffff80003407f9b - nt!ExFreePoolWithTag+20b
[ 8d:9d ]
1 error : !nt (fffff80003407f9b)
MODULE_NAME: memory_corruption
IMAGE_NAME: memory_corruption
FOLLOWUP_NAME: memory_corruption
DEBUG_FLR_IMAGE_TIMESTAMP: 0
MEMORY_CORRUPTOR: ONE_BIT
STACK_COMMAND: .cxr 0xfffff8800c191f10 ; kb
FAILURE_BUCKET_ID: X64_MEMORY_CORRUPTION_ONE_BIT
BUCKET_ID: X64_MEMORY_CORRUPTION_ONE_BIT
Followup: memory_corruption
---------

STOP 0x00000050: PAGE_FAULT_IN_NONPAGED_AREA
Usual causes: Defective hardware (particularly memory - but not just RAM), Faulty system service, Antivirus, Device driver, NTFS corruption, BIOS
This indicates that invalid system memory has been referenced.

Code:

Event[2163]:
Log Name: System
Source: Microsoft-Windows-WER-SystemErrorReporting
Date: 2011-05-25T22:41:37.000
Event ID: 1001
Task: N/A
Level: Error
Opcode: N/A
Keyword: Classic
User: N/A
User Name: N/A
Computer: YVES
Description:
The computer has rebooted from a bugcheck. The bugcheck was: 0x00000050 (0xfffff6f450096228, 0x0000000000000000, 0xfffff8000327c31b, 0x0000000000000005). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 052511-23150-01.

http://www.sevenforums.com/bsod-help-support/166180-bsod-ntoskrnl-exe.html
Relevancy 42.57%

This has happened several times on Win7 Pro. Notice that I am running two machines and the other ntoskrnl.exe file is dated in May while the machine in trouble is dated in March. I have attached several files.

A:BSOD ntoskrnl.exe

Hello cyclone3211.

A stop 0x9F caused by the realtek network driver is rare. Please let me understand one thing? Your onboard connection is Marvell Yukon, and you are using Realtek? Is it a card?

Anyway, the driver is kinda backdated.

Code:
fffff880`0547e000 fffff880`05545000 Rt64win7 T (no symbols)
Loaded symbol image file: Rt64win7.sys
Image path: Rt64win7.sys
Image name: Rt64win7.sys
Timestamp: Wed Dec 26 22:47:50 2012 (50DB313E)
CheckSum: 000CDEEE
ImageSize: 000C7000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Update it from Realtek

Also, uninstall SeriousBit NetBalancer Internet traffic control (nbdrv.sys) and Networx, at least as a try.

Moreover, it appears to be a desktop computer. So you can disable Sleep and hibernate. It will also help you to get rid of your issue.

Let us know the results.
_________________________________________________________________________
BSOD ANALYSIS:

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa8007ae4a10, fffff80000b9c518, fffffa800ccebcf0}

*** WARNING: Unable to verify timestamp for Rt64win7.sys
*** ERROR: Module load completed but symbols could not be loaded for Rt64win7.sys
Probably caused by : Rt64win7.sys

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

DRIVER_POWER_STATE_FAILURE (9f)
A driver has failed to complete a power IRP within a specific time (usually 10 minutes).
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: fffffa8007ae4a10, Physical Device Object of the stack
Arg3: fffff80000b9c518, nt!TRIAGE_9F_POWER on Win7, otherwise the Functional Device Object of the stack
Arg4: fffffa800ccebcf0, The blocked IRP

Debugging Details:
------------------
DRVPOWERSTATE_SUBCODE: 3

DEVICE_OBJECT: fffffa800869b050

DRIVER_OBJECT: fffffa800869f800

IMAGE_NAME: Rt64win7.sys

DEBUG_FLR_IMAGE_TIMESTAMP: 50db313e

MODULE_NAME: Rt64win7

FAULTING_MODULE: fffff8800547e000 Rt64win7

IRP_ADDRESS: fffffa800ccebcf0

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

BUGCHECK_STR: 0x9F

PROCESS_NAME: System

CURRENT_IRQL: 2

TAG_NOT_DEFINED_c000000f: FFFFF80000BA2FB0

STACK_TEXT:
fffff800`00b9c4c8 fffff800`0494d8c2 : 00000000`0000009f 00000000`00000003 fffffa80`07ae4a10 fffff800`00b9c518 : nt!KeBugCheckEx
fffff800`00b9c4d0 fffff800`048e884c : fffff800`00b9c600 fffff800`00b9c600 00000000`00000000 00000000`00000001 : nt! ?? ::FNODOBFM::`string'+0x33af0
fffff800`00b9c570 fffff800`048e86e6 : fffff800`04a8df20 00000000`000683b2 00000000`00000000 00000000`00000000 : nt!KiProcessTimerDpcTable+0x6c
fffff800`00b9c5e0 fffff800`048e85ce : 0000000f`88187094 fffff800`00b9cc58 00000000`000683b2 fffff800`04a5c8c8 : nt!KiProcessExpiredTimerList+0xc6
fffff800`00b9cc30 fffff800`048e83b7 : 00000004`ddd28fc1 00000004`000683b2 00000004`ddd28f17 00000000`000000b2 : nt!KiTimerExpiration+0x1be
fffff800`00b9ccd0 fffff800`048d590a : fffff800`04a58e80 fffff800`04a66cc0 00000000`00000002 fffff880`00000000 : nt!KiRetireDpcList+0x277
fffff800`00b9cd80 00000000`00000000 : fffff800`00b9d000 fffff800`00b97000 fffff800`00b9... Read more

http://www.sevenforums.com/bsod-help-support/299413-bsod-ntoskrnl-exe.html
Relevancy 42.57%

Ran memtest 5 times and found 0 issues.

Here's some files holding more information about this
Hope they open okay, first time posting here.
Also sometimes restarts randomly

A:BSOD - ntoskrnl.exe

Welcome.

Caused by: Core Temp - CPU temperature monitor

Uninstall to test.

Revo Uninstaller:

Use Revo Uninstaller to uninstall stubborn software.

Download and install the software
Opt for Advance Mode while uninstalling which allows you to remove leftover registry.
Download Revo Uninstaller Freeware - Free and Full Download - Uninstall software, remove programs, solve uninstall problems



Code:
Microsoft (R) Windows Debugger Version 6.2.9200.20512 X86
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\admin\Downloads\SF_04-12-2014\SF_04-12-2014\120414-32666-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.18409.amd64fre.win7sp1_gdr.140303-2144
Machine Name:
Kernel base = 0xfffff800`02e1d000 PsLoadedModuleList = 0xfffff800`03060890
Debug session time: Fri Dec 5 10:42:14.836 2014 (UTC + 6:00)
System Uptime: 0 days 9:21:59.007
Loading Kernel Symbols
...............................................................
................................................................
................................
Loading User Symbols
Loading unloaded module list
...........
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 50, {fffffa800ce00000, 0, fffff8800a8e961e, 0}

*** WARNING: Unable to verify timestamp for ALSysIO64.sys
*** ERROR: Module load completed but symbols could not be loaded for ALSysIO64.sys

Could not read faulting driver name
Probably caused by : ALSysIO64.sys ( ALSysIO64+361e )

Followup: MachineOwner
---------

2: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced. This cannot be protected by try-except,
it must be protected by a Probe. Typically the address is just plain bad or it
is pointing at freed memory.
Arguments:
Arg1: fffffa800ce00000, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffff8800a8e961e, If non-zero, the instruction address which referenced the bad memory
address.
Arg4: 0000000000000000, (reserved)

Debugging Details:
------------------


Could not read faulting driver name

READ_ADDRESS: GetPointerFromAddress: unable to read from fffff800030ca100
GetUlongFromAddress: unable to read from fffff800030ca1c0
fffffa800ce00000 Nonpaged pool

FAULTING_IP:
ALSysIO64+361e
fffff880`0a8e961e 4c8b4c0af0 mov r9,qword ptr [rdx+rcx-10h]

MM_INTERNAL_CODE: 0

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

BUGCHECK_STR: 0x50

PROCESS_NAME: Core Temp.exe

CURRENT_IRQL: 0

TRAP_FRAME: fffff8800a0986c0 -- (.trap 0xfffff8800a0986c0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000015 rbx=0000000000000000 rcx=fffff88015db0ce8
rdx=000001fff704f324 rsi=0000000000000000 rdi=0000000000000000
rip=fffff8... Read more

http://www.sevenforums.com/bsod-help-support/354294-bsod-ntoskrnl-exe.html
Relevancy 42.57%

Hello I would need some help about the analysis of a random BsoD It is TOTALLY random on BSOD (Mostly) ntoskrnl.exe a fresh Windows installation In the following is attached the report from the utility quot whocrashed quot which just does a recap of all the dmp files I have no idea on how to analyze it Any suggestion It seems like of the (Mostly) ntoskrnl.exe BSOD crashes are caused by quot ntoskrnl exe quot It might be a RAM issue I have run Memtest flawless runs My OS is Win Home and the RAMs are running at the correct voltage Thanks a lot in advance for your help Quote On Sun your computer crashed This was likely caused by the following module atikmpag sys Bugcheck code x B xC xFFFFF EDE xFFFFF F x Error SYSTEM SERVICE (Mostly) ntoskrnl.exe BSOD EXCEPTION Dump file C Windows Minidump - - dmp file path C (Mostly) ntoskrnl.exe BSOD Windows system drivers atikmpag sys product AMD driver company Advanced Micro Devices Inc description AMD multi-vendor Miniport Driver On Tue your computer crashed This was likely caused by the following module ntoskrnl exe Bugcheck code x xFFFFDA x xFFFFF F D E x Error PAGE FAULT IN NONPAGED AREA Dump file C Windows Minidump - - dmp file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System The crash took place in a standard Microsoft module Your system configuration may be incorrect possibly the culprit is in another driver on your system which cannot be identified at this time On Tue your computer crashed This was likely caused by the following module ntoskrnl exe Bugcheck code x xFFFFD A F x xFFFFF FA F x Error PAGE FAULT IN NONPAGED AREA Dump file C Windows Minidump - - dmp file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System The crash took place in a standard Microsoft module Your system configuration may be incorrect possibly the culprit is in another driver on your system which cannot be identified at this time On Sat your computer crashed This was likely caused by the following module ntoskrnl exe Bugcheck code x xFFFFB C EAF x xFFFFF A C x Error PAGE FAULT IN NONPAGED AREA Dump file C Windows Minidump - - dmp file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System The crash took place in a standard Microsoft module Your system configuration may be incorrect possibly the culprit is in another driver on your system which cannot be identified at this time On Sat your computer crashed This was likely caused by the following module ntoskrnl exe Bugcheck code xA xFFFFBA x x xFFFFF A Error IRQL NOT LESS OR EQUAL Dump file C Windows Minidump - - dmp file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System The crash took place in a standard Microsoft module Your system configuration may be incorrect possibly the culprit is in another driver on your system which cannot be identified at this time On Tue your computer crashed This was likely caused by the following module ntoskrnl exe Bugcheck code xA xFFFFBA D CDF x x xFFFFF B A F Error IRQL NOT LESS OR EQUAL Dump file C Windows Minidump - - dmp file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System The crash took place in a standard Microsoft module Your system configuration may be incorrect possibly the culprit is in another driver on your system which cannot be identified at this time On Tue your computer crashed This was likely caused by the following module ntoskrnl exe Bugcheck code x xFFFFBA DE CC x xFFFFF AEFCF x Error PAGE FAULT IN NONPAGED AREA Dump file C Windows Minidump - - dmp file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation descri... Read more

A:(Mostly) ntoskrnl.exe BSOD

Please follow these directions: http://www.sevenforums.com/crashes-d...tructions.html

http://www.sevenforums.com/bsod-help-support/98277-mostly-ntoskrnl-exe-bsod.html
Relevancy 42.57%

I'm currently using safe mode ntoskrnl.exe BSOD in case it gets shut down again I keep getting error on perfmon report so no zip file BSOD ntoskrnl.exe It all happened a year ago BSOD ntoskrnl.exe when I was playing Battlefield and it crashed while I was out for minutes The power switch kept blinking and it wouldn't reboot so I had to pull the plug After a successful boot it would get BSOD every time after - min So I decided to re-install and wipe out everything Then I called the guys at the computer store and inspected my system over a week but couldn't find the cause They found some problem on Plextor SSD after running HD Tune I've visited AMD customer service myself and there was no problem with their VGA I've rarely played games since and I've been cleaning registries and tweaked some settings I've wiped out programs using Revo which I shouldn't have done including things above Then three days ago BSOD happened again A list of programs and past BSODs are listed below -dxgmms sys atikmdag sys BSOD before Sep re-install I've only captured out of -No driver or application updates for over months Windows Updates incl -BIOS update HostsMan Intel utilities MSXML Visual Studio -ESET Smart Security Malwarebytes Ace Utilities adwcleaner CCleaner ComboFix Diskeeper HitmanPro JRT jv Revo rkill sc-cleaner Windos Ultimate bit Full retail years usage re-installed last September x Antec TP- C PLUS GOLD System Information local Computer name ADMIN-PC Windows version Windows Service Pack build Windows dir C Windows Hardware ASRock B M Pro CPU GenuineIntel Intel reg Core i - CPU GHz Intel level logical processors active mask RAM bytes total Crash Dump Analysis Crash dump directory C Windows MinidumpCrash dumps are enabled on your computer On Mon AM GMT your computer crashed crash dump file C Windows Minidump - - dmp This was probably caused by the following module ntoskrnl exe nt x C Bugcheck code x E x D x DE CB x xFFFFF E F Error PFN LIST CORRUPT file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System Bug check description This indicates that the page frame number PFN list is corrupted This appears to be a typical software driver bug and is not likely to be caused by a hardware problem This might be a case of memory corruption More often memory corruption happens because of software errors in buggy drivers not because of faulty RAM modules The crash took place in the Windows kernel Possibly this problem is caused by another driver that cannot be identified at this time On Mon AM GMT your computer crashed crash dump file C Windows memory dmp This was probably caused by the following module ntkrnlmp exe nt KeBugCheckEx x Bugcheck code x E x D x DE CB x xFFFFF E F Error PFN LIST CORRUPT Bug check description This indicates that the page frame number PFN list is corrupted This appears to be a typical software driver bug and is not likely to be caused by a hardware problem This might be a case of memory corruption More often memory corruption happens because of software errors in buggy drivers not because of faulty RAM modules The crash took place in the Windows kernel Possibly this problem is caused by another driver that cannot be identified at this time Conclusion crash dumps have been found and analyzed No offending third party drivers have been found Connsider using WhoCrashed Professional which offers more detailed analysis using symbol resolution Also configuring your system to produce a full memory dump may help you Read the topic general suggestions for troubleshooting system crashes for more information Note that it's not always possible to state with certainty whether a reported driver is responsible for crashing your system or that the root cause is in another module Nonetheless it's suggested you look for updates for the products that these drivers belong to and regularly visit Windows update or enable automatic updates for Windows In case a ... Read more

http://www.bleepingcomputer.com/forums/t/623061/bsod-ntoskrnlexe/
Relevancy 42.57%

Hi all i have windows ultimate everything worked fine till this morning lately i had some bsod appearing in BSOD ntoskrnl Win with 7 and Help oncei n a while but after a couple of reboot everything worked fine again til ltoday Help with BSOD in Win 7 and ntoskrnl when the pc stay on for mintues then get the bsod again i checked the minidump and it appeared that the problem was due to Poweriso virtual drive so i removed the driver the program and everything related Help with BSOD in Win 7 and ntoskrnl to it but still no avail the minidump though mention that the problem is notskrnl exe what it could be i haven t installed anything recently beside that poweriso program and all dirvers are up to date here s the dump hoep someone can help me forgot to add i also have daemont tools as a virtua ldrive but i never had trobules with that although some peopel states ti could eb the problem also in safe mode everything seems to work fine so it must be something related to a software issue and not hardwre as i thought also the windows quot slvinc pc issues quot that appears on the bottom right of teh task bar says this quot Download updates for PX Engine PX Engine has stopped working properly and give me a link to the roxio web page i never had any roxio cd burning programs nor driver or device so i don t know where windows took this thing anyway i installed the driver the link gave me and still no solution nbsp

A:Help with BSOD in Win 7 and ntoskrnl

i need help,if anyone knowas nttyhing,please reply
 

http://www.techspot.com/community/topics/help-with-bsod-in-win-7-and-ntoskrnl.157919/
Relevancy 42.57%

Another humble and desperate hope for help I have a crash dump analyzis ntoskrnl.exe BSOD =( here On Tue - - BSOD ntoskrnl.exe =( your computer crashed This was likely caused by the following module ntoskrnl exe Bugcheck code x x xFFFFF FE D xFFFFF FE D xFFFFF FE D Error BAD POOL HEADER Dump file C Windows Minidump - - dmp file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System The crash took place in a standard Microsoft module Your system configuration may be incorrect possibly the culprit is in another driver on your system which cannot be identified at this time On Fri - - your computer crashed This was likely caused by the following module ntoskrnl exe Bugcheck code x x xFFFFF C D B xFFFFF C D B xFFFFFA C D B Error BAD POOL HEADER Dump file C Windows Minidump - - dmp file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System The crash took place in a standard Microsoft module Your system configuration may be incorrect possibly the culprit is in another driver on your system which cannot be identified at this time On Fri - - your computer crashed This was likely caused by the following module ntoskrnl exe Bugcheck code xA x x x xFFFFF ACB Error IRQL NOT LESS OR EQUAL Dump file C Windows Minidump - - dmp file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System The crash took place in a standard Microsoft module Your system configuration may be incorrect possibly the culprit is in another driver on your system which cannot be identified at this time On Wed - - your computer crashed This was likely caused by the following module ntoskrnl exe Bugcheck code xC x x xFFFFFA B E x Error DRIVER VERIFIER DETECTED VIOLATION Dump file C Windows Minidump - - dmp file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System The crash took place in a standard Microsoft module Your system configuration may be incorrect possibly the culprit is in another driver on your system which cannot be identified at this time My screens happens only when the computer is under quot stress quot Meaning when I play game or I am doing rendering if that is important information Especially the game Dragon Age Origins is bad My system is very new and it does my tummy no good to have problems sigh The one who can help me out I will visit and cook a good dinner for

A:BSOD ntoskrnl.exe =(

Can you please post your actual crash dump file
http://www.sevenforums.com/crashes-d...tructions.html

http://www.sevenforums.com/bsod-help-support/97198-bsod-ntoskrnl-exe.html
Relevancy 42.57%

A few days ago i bought a PC, it begun to crash so i reinstalled OS but the BSODs continues. I updated drivers and tried to fix the problem without result.
After days "moving things up and down" the current status of the PC are the three last Minidumps.
Any help would be greatly appreciated.

A:BSOD ntoskrnl.exe

Unfortunately, your installation is clearly counterfeit, you seem to have a retail Gigabyte motherboard with Acer/Gateway/Packard Bell OEM_SLP, please format and install with a genuine installation key.

http://www.sevenforums.com/bsod-help-support/299096-bsod-ntoskrnl-exe.html
Relevancy 42.57%

Hi all,
My computer sometime gets BSOD ! I've tried to do some fixes but could not solve. Please take a look on the attachment and give me some advices !

A:BSOD - ntoskrnl.exe

Hiya and welcome to SevenForums!

Code:
BugCheck 74, {2, fffff8800321b9e0, 2, ffffffffc000014d}

Probably caused by : ntkrnlmp.exe ( nt!CmpLoadHiveThread+23a )
I hate to say this but you need to re-install Windows, 0x74's is bad system info, so re-install Windows and report back.

http://www.sevenforums.com/bsod-help-support/378241-bsod-ntoskrnl-exe.html
Relevancy 42.57%

Hello there, I've been having some BSOD issues with my new build. My dump file is attached. I've used BlueScreenView and figured that it was a ntoskrnl.exe problem. It usually BSODs when I'm playing games. Also I'm running the newest AMD Crimson drivers 15.11.1. Not exactly sure what's wrong and would like a few suggestions.

Thanks!

http://www.sevenforums.com/bsod-help-support/387123-bsod-ntoskrnl-exe.html
Relevancy 42.57%

I keep getting BSOD with different warnings

I have attached a zip file containing all 5 minidump files for all 5 BSOD's

Thanks in Advance

A:BSOD ntoskrnl.exe

  
Quote: Originally Posted by Pandy90


I keep getting BSOD with different warnings

I have attached a zip file containing all 5 minidump files for all 5 BSOD's

Thanks in Advance



Your Macaffee. Remove and replace with Microsoft Security Essentials
How to uninstall or reinstall supported McAfee consumer products using the McAfee Consumer Products Removal tool (MCPR.exe)

http://www.microsoft.com/security_essentials/

Ken J

http://www.sevenforums.com/bsod-help-support/131456-bsod-ntoskrnl-exe.html
Relevancy 42.57%

hey,

I just installed Windows Ultimate 64bit on my PC.
But from time to time I got a BSOD, this is a new fresh/clean install.
The only thing I have done is updating drivers and windows updates.

I do have one windows update that won't install: KB2621440 code 800B0100

Thanks in advance.

Zyon1989

A:BSOD - ntoskrnl.exe

Update:

I uninstalled Daemon Tools, and run some tests:

Memtest86: I tested my 2 rams separately both in the 2 slots they were located, all passed up to 9 tests without any errors
SFC/ Scannow: no errors, all fine
Shckdsk: in step 4 it replaced 2 files: replaced bad clusters in file ...
Prime95: could not start the blend test, hardware error occurred

So now im posting the new files from the diagnostic here, if anything changed?

http://www.sevenforums.com/bsod-help-support/248091-bsod-ntoskrnl-exe.html
Relevancy 42.57%

Hello,

I often get a BSOD on my freshly installed windows PC. After searching the description of the log file I found that the cause is the ntoskrnl file. I understand many things can cause a corruption of the file. with the dmp and everything, hopefully someone can help me.

Is Windows 7 . . .
- x64
- self installed
- full retail version
- age of system: 2 weeks
- age of OS installation: <2 days (yes reinstalled it)
- system spec you find in profile

A:BSOD with ntoskrnl.exe

Dump blames 0x7F - see this thread: STOP 0x7F (UNEXPECTED_KERNEL_MODE_TRAP)

Update your ATI PCIe Motherboard/Chipset - here

Code:
AtiPcie.sys Wed May 06 03:00:22 2009
Update your Logitech Camera Driver - here

Code:
lv302a64.sys Fri May 01 10:41:07 2009
LV302V64.SYS Fri May 01 10:43:26 2009
lvrs64.sys Fri May 01 10:43:25 2009
Regards...

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 7F, {8, 80050031, 6f8, fffff80002e9eeb8}

Probably caused by : ntkrnlmp.exe ( nt!KiDoubleFaultAbort+b2 )

Followup: MachineOwner
---------

1: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

UNEXPECTED_KERNEL_MODE_TRAP (7f)
This means a trap occurred in kernel mode, and it's a trap of a kind
that the kernel isn't allowed to have/catch (bound trap) or that
is always instant death (double fault). The first number in the
bugcheck params is the number of the trap (8 = double fault, etc)
Consult an Intel x86 family manual to learn more about what these
traps are. Here is a *portion* of those codes:
If kv shows a taskGate
use .tss on the part before the colon, then kv.
Else if kv shows a trapframe
use .trap on that value
Else
.trap on the appropriate frame will show where the trap was taken
(on x86, this will be the ebp that goes with the procedure KiTrap)
Endif
kb will then show the corrected stack.
Arguments:
Arg1: 0000000000000008, EXCEPTION_DOUBLE_FAULT
Arg2: 0000000080050031
Arg3: 00000000000006f8
Arg4: fffff80002e9eeb8

Debugging Details:
------------------
BUGCHECK_STR: 0x7f_8

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

PROCESS_NAME: System

CURRENT_IRQL: 2

LAST_CONTROL_TRANSFER: from fffff80002ed5ca9 to fffff80002ed6740

STACK_TEXT:
fffff880`009efce8 fffff800`02ed5ca9 : 00000000`0000007f 00000000`00000008 00000000`80050031 00000000`000006f8 : nt!KeBugCheckEx
fffff880`009efcf0 fffff800`02ed4172 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiBugCheckDispatch+0x69
fffff880`009efe30 fffff800`02e9eeb8 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiDoubleFaultAbort+0xb2
fffff880`087de000 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!SeAccessCheckFromState+0x60
STACK_COMMAND: kb

FOLLOWUP_IP:
nt!KiDoubleFaultAbort+b2
fffff800`02ed4172 90 nop

SYMBOL_STACK_INDEX: 2

SYMBOL_NAME: nt!KiDoubleFaultAbort+b2

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: nt

IMAGE_NAME: ntkrnlmp.exe

DEBUG_FLR_IMAGE_TIMESTAMP: 4cc791bd

FAILURE_BUCKET_ID: X64_0x7f_8_nt!KiDoubleFaultAbort+b2

BUCKET_ID: X64_0x7f_8_nt!KiDoubleFaultAbort+b2

Followup: MachineOwner
---------

1: kd> lmtsmn
start end module name
fffff880`00f0b000 fffff880`00f62000 ACPI ACPI.sys Tue Jul 14 11:19:34 2009 (4A5BC106)
fffff880`02b25000 fffff880`02baf000 afd afd.sys Tue Jul 14 11:21:40 2009 (4A5BC184)
fffff880`11c00000 fffff880`11c16000 AgileVpn AgileVpn.sys Tue Jul 14 12:10:24 2009 (4A5BCCF0)
fffff880`03fdd000 fffff880`03ff2000 amdppm amdppm.sys Tue Jul 14 11:19:25 2009 (4A5BC0FD)
fffff880`00e4d000 fffff880`00e58000 amdxata amdxata.sys ... Read more

http://www.sevenforums.com/bsod-help-support/147688-bsod-ntoskrnl-exe.html
Relevancy 42.57%

Computer has been crashing a ton recently and I am looking for a fix, please respond if you know any anything.

http://www.sevenforums.com/bsod-help-support/385898-bsod-ntoskrnl-exe-fix.html
Relevancy 42.57%

I have been having BSOD and random warnings regarding my Graphics card BSOD ntoskrnl.exe i have taken an image of the warning this can happen BSOD ntoskrnl.exe at regular intervals from heavy graphic work photoshop to internet browsing and video clips youtube etc I have installed bluescreen viewer and this is the dump i saved they all have one thing in common the ntoskrnl driver Is this purely the graphics card or could it be something else I am running Windows Bit ASUS EAH GB Silent card x GB Corsair RAM ASUS P QL EPU Motherboard Quote Dump File - - dmp Crash Time Bug Check String KMODE EXCEPTION NOT HANDLED Bug Check Code x e Parameter Parameter Parameter Parameter Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win ldr - Processor x Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File - - dmp Crash Time Bug Check String KMODE EXCEPTION NOT HANDLED Bug Check Code x e Parameter ffffffff c Parameter fffff a f Parameter Parameter Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win ldr - Processor x Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File - - dmp Crash Time Bug Check String SYSTEM SERVICE EXCEPTION Bug Check Code x b Parameter c Parameter fffff a b Parameter fffff Parameter Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win ldr - Processor x Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File - - dmp Crash Time Bug Check String BAD POOL CALLER Bug Check Code x c Parameter Parameter Parameter Parameter fffff a b cc Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win ldr - Processor x Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version

A:BSOD ntoskrnl.exe

Welcome to TSF

Did you update the video driver?

http://www.techsupportforum.com/forums/f299/bsod-ntoskrnl-exe-525843.html
Relevancy 42.57%

hi nice folks Been getting bsods for awhile now could plz ntoskrnl.exe some BSOD use help mostly BSOD ntoskrnl.exe could use some help plz this month I've tried everything I know how and have since learned BSOD ntoskrnl.exe could use some help plz about to find the culprit and I give up win ultimate x retail new box running with new hardware for a year now grphx card is not o c'd no hardware was added recently installed windows debugger but having a heck of a time getting it to see the symbols path either the online way or local dir way Tried both ran memtest on all sticks separately and different slots Resutls were positive Of the mini dmp files at least were memory related ntoskrnl exe is usually the gateway to the rest of the kernals and as such it's very generalized or so it was explained to me recently So without a more definitive analysis I'm stuck for now it's a f result code meaning a double fault typically mem or cpu but could be anything BCCode f BCP BCP BCP F BCP FFFFF CD DA OS Version Service Pack Product I'd gladly replace any hardware or drv or sys file or delete files programs or update old drivers Whatever you nice folks think is needed to get rid of the bsods Just need to know which one attached zip files of forum's stated protocol for bsods help Thanks much Rusty

A:BSOD ntoskrnl.exe could use some help plz

Hello and Welcome !

Uninstall Zone Alarm and use the Removal Tool Download from Official Site and Install Microsoft Security Essentials.

Go to Start | CMD | Right Click and Run as administrator | SFC /SCANNOW

Update the Following Drivers:


Code:
uimx64.sys Fri Sep 26 18:58:33 2008
hotcore3.sys Wed Jul 30 03:28:17 2008
adfs.SYS Fri Jun 27 02:22:37 2008
000.fcl Fri Sep 26 18:41:22 2008
Use this link for help in updating drivers: Driver Troubleshooting !! ? Captain Debugger

Bugcheck:


Code:
UNEXPECTED_KERNEL_MODE_TRAP (7f)
This means a trap occurred in kernel mode, and it's a trap of a kind
that the kernel isn't allowed to have/catch (bound trap) or that
is always instant death (double fault). The first number in the
bugcheck params is the number of the trap (8 = double fault, etc)
Consult an Intel x86 family manual to learn more about what these
traps are. Here is a *portion* of those codes:
If kv shows a taskGate
use .tss on the part before the colon, then kv.
Else if kv shows a trapframe
use .trap on that value
Else
.trap on the appropriate frame will show where the trap was taken
(on x86, this will be the ebp that goes with the procedure KiTrap)
Endif
kb will then show the corrected stack.
Arguments:
Arg1: 0000000000000008, EXCEPTION_DOUBLE_FAULT
Arg2: 0000000080050031
Arg3: 00000000000006f8
Arg4: fffff80002c8f05f

Debugging Details:
------------------
BUGCHECK_STR: 0x7f_8

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

PROCESS_NAME: System

CURRENT_IRQL: 2

LAST_CONTROL_TRANSFER: from fffff80002c88ca9 to fffff80002c89740

STACK_TEXT:
fffff880`02f6ace8 fffff800`02c88ca9 : 00000000`0000007f 00000000`00000008 00000000`80050031 00000000`000006f8 : nt!KeBugCheckEx
fffff880`02f6acf0 fffff800`02c87172 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiBugCheckDispatch+0x69
fffff880`02f6ae30 fffff800`02c8f05f : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiDoubleFaultAbort+0xb2
fffff880`02f86f70 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!SepAccessCheck+0x4f
STACK_COMMAND: kb

FOLLOWUP_IP:
nt!KiDoubleFaultAbort+b2
fffff800`02c87172 90 nop

SYMBOL_STACK_INDEX: 2

SYMBOL_NAME: nt!KiDoubleFaultAbort+b2

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: nt

IMAGE_NAME: ntkrnlmp.exe

DEBUG_FLR_IMAGE_TIMESTAMP: 4c1c44a9

FAILURE_BUCKET_ID: X64_0x7f_8_nt!KiDoubleFaultAbort+b2

BUCKET_ID: X64_0x7f_8_nt!KiDoubleFaultAbort+b2

Followup: MachineOwner
---------
Hope this helps,
Captain

http://www.sevenforums.com/bsod-help-support/132399-bsod-ntoskrnl-exe-could-use-some-help-plz.html
Relevancy 42.57%

My boss is using a computer for video editing with Premiere Pro CS for creation of commercials promo videos etc For the past few days he's been getting BSODs and all are pointing to ntoskrnl exe but that's just a general error from what I can tell It's not just during video editing either I tried reinstalling video card drivers because he reported an anomoly with it and when I went to use the check with ntoskrnl.exe BSOD for updates in the nvidia control panel it gave me an error so I did a clean install of the drivers It still BSOD'd once yesterday and BSOD with ntoskrnl.exe then this morning when I came in it had BSOD'd right before I got here and all it was doing overnight was uploading to an FTP I've got windows memory diagnostic running on it at the moment The standard test didnt reveal anything so I'm doing the extended From my initial searches though ntoskrnl exe is more of a software issue than hardware Please help I'm not sure what else to do from here EDIT I also ran sfc scannow but everything said it was okay

A:BSOD with ntoskrnl.exe

I would guess it's a problem related to your SSD-disk, try updating the firmware for it.

Edit: Also update the drivers for your Marvell disk controllers.

http://www.sevenforums.com/bsod-help-support/247192-bsod-ntoskrnl-exe.html
Relevancy 42.57%

I've been getting this BOSD error atlease once a day =(

Can you please let me know if it a driver that I need to uninstall, or mabey a ram is bad ?

I will appreciate this so much !

thank you in advanced

I've attached the DMP files I've got (almost one a day)

http://www.sevenforums.com/bsod-help-support/393678-bsod-ntoskrnl-exe.html
Relevancy 42.57%

I've been getting this BOSD error atlease once a day =(

Can you please let me know if it a driver that I need to uninstall, or mabey a ram is bad ?

I will appreciate this so much !

thank you in advanced

I've attached the DMP files I've got (almost one a day)

http://www.tenforums.com/bsod-crashes-debugging/45152-bsod-ntoskrnl-exe.html
Relevancy 42.57%

ran memtest through 9 passes and found no issues

newly built machine, dump files attached

bluescreenview has said its the kernal the last 7-8 times, but I haven't been able to find any real fixes

A:BSOD from ntoskrnl.exe

Additional information is required.

1. Download the DM Log Collector application to your desktop by clicking the link below

DM Log Collector.exe

2. Run it by double-clicking the icon on your desktop, and follow the prompts.
3. Locate the .ZIP file that is created on your desktop, and upload it here in your next reply.

http://www.sevenforums.com/bsod-help-support/355453-bsod-ntoskrnl-exe.html
Relevancy 42.57%

I got a new pc, see specs under here. First week it ran fine, then it started to get BSOD's. Sometimes more than 2 a day, sometimes none.

? OS: Windows 7
? x64
? No OS originally installed, newly built system
? full retail version
? ~1 month
? ~1 month
? CPU: Intel i5-760
? Video Card: XFX HD 5770 1GB
? MotherBoard: Asus p7p55d
? Power Supply - Corsair 600watt

BlueScreenView log included in the rar; ntoskrnl.exe seems to be the problem.

Help is appreciated!

A:BSOD - ntoskrnl.exe

Anyone who could help me?

If you need more info, just ask.

http://www.techsupportforum.com/forums/f299/bsod-ntoskrnl-exe-535805.html
Relevancy 42.57%

Hi - BSOD ntoskrnl.exe I've been having intermittent BSOD's every few weeks BSOD - ntoskrnl.exe which I cannot seem to track down This only occurs when the PC is in sleep mode it seems Can someone give me a hand in tracking down the culprit attached are the required outputs and a Blue Screen View dump file Thanks Victor OS - Vista Windows - Win x -bit or x What was original installed OS on system winXP X from what I recall Is the OS an OEM version came pre-installed on system or full retail version YOU purchased it from retailer Custom install Age of system hardware about a years Age of OS installation - have you re-installed the OS yes within the last - months CPU - AMD Phenom tm II X T Processor Mhz Core s Logical Processor s Video Card - Nvidia GTX MotherBoard - Gigabyte GA- FXA-UD Power Supply - brand amp wattage - W maybe System Manufacturer - customer parts not sure what else is required here Exact model number if laptop check label on bottom -

A:BSOD - ntoskrnl.exe

Hi,

Please refer to the following and reply back accordingly with the required information - http://www.techsupportforum.com/foru...ta-452654.html

Regards,

Patrick

http://www.techsupportforum.com/forums/f299/bsod-ntoskrnl-exe-842826.html
Relevancy 42.57%

MONSTAR-11_12_2015__04615_64.zip

Hi all I've been getting BSOD since playing Fallout 4. Initially I saw it was Nvidia related so I update my graphics and it seems to have cured that one, however now I've been getting a different error. I ran a memtest and all seemed good, I think it may be one of my drives. I'm guessing the steam SSD fallout is on. I downloaded a corsair toolbox to test the drive however when I opened it it BSOD'd again. I'm currently backing up my drives. Can anyone read by dumps and see where the issue is? I would have thought a problem with my drive would have triggered a SMART failure.

Thanks,
Chris

A:BSOD - NTOSKRNL.exe

Hello Chrisred and welcome to the forums. I will show you what I found


Code:
Use !analyze -v to get detailed debugging information.
BugCheck 3D, {fffff803cc1ffbd8, fffff803cc1ff3f0, 0, 0}
*** WARNING: Unable to verify timestamp for mv91xx.sys
*** ERROR: Module load completed but symbols could not be loaded for mv91xx.sys
Probably caused by : mv91xx.sys ( mv91xx+32276 )
Followup: MachineOwner
That is your Marvell Raid/AHCI driver. This is your current driver


Code:
mv91xx
Browse full module list
start end module name
fffff800`f8540000 fffff800`f85cc000 mv91xx T (no symbols)
Loaded symbol image file: mv91xx.sys
Image path: \SystemRoot\System32\drivers\mv91xx.sys
Image name: mv91xx.sys
Browse all global symbols functions data
Timestamp: Fri Dec 25 00:45:39 2009 (4B345F93)
CheckSum: 0004E351
ImageSize: 0008C000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e
As you can tell the driver needs updating. In 2009, Windows 10 was not even on the radar. When you installed Windows 10 did you update the drivers from your Motherboard web site or did you let Windows install the driver? You have an older chipset and I would suspect that your motherboard drivers do not include Windows 10 drivers.

Also, please check and make sure your SSD is not connected to a Marvell port. I realize your motherboard does not have native sata 3 ports, but has the Marvell add on ports. But, I would suspect you will get about the same performance from a native sata 2 port that you are getting from a Marvell sata 3 port. Also, Marvell has a history of not liking to 'play nice' with SSDs.

Please see if you can update that driver and swap your SSD from the Marvell port to an Intel port (usually ports 0-3) and see if you get any improvements with your BSOD problem. I would suggest you connecting the SSD to port 0 or 1, whichever is the first Intel controlled sata port. After making the switch you may need to go into BIOS and set your boot order again. Sometimes switching ports and controllers will cause BIOS to not find your boot drive.

You may also want to check your Corsair Link drivers and make sure you have Windows 10 compatible drivers for that. It was pointed out in one of the dumps, but it could have been from the problems with the SSD/Controller causing it. It wouldn't hurt just to be sure.

Please let me know how this works.

http://www.tenforums.com/bsod-crashes-debugging/33373-bsod-ntoskrnl-exe.html
Relevancy 42.57%

Random BSOD and cant figure out whats causing it, ive attatched a dump file from the last BSOD

Thanks

A:BSOD 1e, ntoskrnl.exe

We need a bit more info - run this .bat file as administrator - it creates a zip file on your desktop. Upload that here.

Attachment 300964

http://www.sevenforums.com/bsod-help-support/317785-bsod-1e-ntoskrnl-exe.html
Relevancy 42.57%

hopefully i provide enough information required ;((

A:BSOD on ntoskrnl.exe

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa8006a25a10, fffff80004c203d8, fffffa800cca3010}

Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : pci.sys

Followup: MachineOwner
-------------------------------------------------------------------------------
Irp is active with 4 stacks 2 is current (= 0xfffffa800cca3128)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 e1 fffffa8006a21e40 00000000 fffff88005b74c74-fffffa800aef8010 Success Error Cancel pending
\Driver\ACPI nvlddmkm
Args: 00000000 00000001 00000001 00000000
[ 16, 2] 0 e1 fffffa80097a3040 00000000 00000000-00000000 pending
\Driver\nvlddmkm
Args: 00000000 00000001 00000001 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-fffffa8008cf4c40

Args: 00000000 00000000 00000000 00000000
--------------------------------------------------------------------------------------------
Device object (fffffa80097a3040) is for:
InfoMask field not found for _OBJECT_HEADER at fffffa80097a3010
\Driver\nvlddmkm DriverObject fffffa80096841c0
Current Irp 00000000 RefCount 0 Type 00000023 Flags 00002004
DevExt fffffa80097a3190 DevObjExt fffffa80097a3b48
ExtensionFlags (0x00000800) DOE_DEFAULT_SD_PRESENT
Characteristics (0x00000100) FILE_DEVICE_SECURE_OPEN
AttachedTo (Lower) fffffa8006a21e40 \Driver\ACPI
Device queue is not busy.
Disablr PCIe link stat power management.
PCIe Link State Power Management - Turn On or Off in Windows

Now put the computer to sleep for some times and report us back if it is any more BSODs there or not.

http://www.sevenforums.com/bsod-help-support/296074-bsod-ntoskrnl-exe.html
Relevancy 42.57%

Keep Getting ntoskrnl.exe driver causing Memory_Management BSOD

Thanks in advance

Running a Memtest and multiple errors are coming up...Will try and remove sticks until error goes away.

A:ntoskrnl.exe bsod

Quote:




Running a Memtest and multiple errors are coming up...Will try and remove sticks until error goes away.




Sounds like you've already pinpointed the issue. Let us know if you find the culprit stick(s).

Regards,

Patrick

http://www.techsupportforum.com/forums/f299/ntoskrnl-exe-bsod-661563.html
Relevancy 42.57%

I'm a bit out of my depth on this one. Any help? Followed the BSOD posting guidelines that I found on the site while researching this (with a hiccup).

Something I couldn't figure out happened to the primary hard drive a month or so ago that made everything unreadable (raid 0) so I did a clean install of everything - BSODs started to happen recently, so I figured it was something I had downloaded. Reinstalled Windows again 4 or so days ago and am still getting them. I've only installed video and audio drivers and a few games. BSODs regardless of what I'm doing. In fact, usually not in-game.

? OS - Windows 8.1
? x64
? What was original installed OS on system - Windows 7 (Windows 8.1 was a clean install)
? full retail OS
? PC is 4 years old
? OS has been on here for about 4 days

? CPU - i7 980x
? Video Card - SLI GTX 480
? EVGA FTW 3
? Power Supply brand & wattage 1200W

Desktop

A:NTOSKRNL.exe BSOD

Hi,

We have various bug checks:

DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1) bug check.

This indicates that a kernel-mode driver attempted to access pageable memory at a process IRQL that was too high.

A driver tried to access an address that is pageable (or that is completely invalid) while the IRQL was too high. This bug check is usually caused by drivers that have used improper addresses.

By default, the fault of the crashes is NETIO.sys which is the Network I/O Subsystem.

PAGE_FAULT_IN_NONPAGED_AREA (50)

This indicates that invalid system memory has been referenced.

Bug check 0x50 usually occurs after the installation of faulty hardware or in the event of failure of installed hardware (usually related to defective RAM, be it main memory, L2 RAM cache, or video RAM).

Another common cause is the installation of a faulty system service.

Antivirus software can also trigger this error, as can a corrupted NTFS volume.

WINLOGON_FATAL_ERROR (c000021a)

This means that an error has occurred in a crucial user-mode subsystem.

Okay, so what crashed?

ADDITIONAL_DEBUG_TEXT: initial session process or

Great, so what initial session process or ?? was it?

BugCheck C000021A, {ffffc000bf27f190, ffffffffc0000428, 0, f1c6a90458}


Code:

1: kd> db ffffc000bf27f190
ffffc000`bf27f190 69 6e 69 74 69 61 6c 20-73 65 73 73 69 6f 6e 20 initial session
ffffc000`bf27f1a0 70 72 6f 63 65 73 73 20-6f 72 00 00 77 e7 d0 11 process or..w...
ffffc000`bf27f1b0 03 01 0e 03 57 6d 69 70-00 00 00 00 0a 00 00 00 ....Wmip........
ffffc000`bf27f1c0 00 00 00 00 41 00 43 00-50 00 49 00 5c 00 47 00 ....A.C.P.I.\.G.
ffffc000`bf27f1d0 65 00 6e 00 75 00 69 00-6e 00 65 00 49 00 6e 00 e.n.u.i.n.e.I.n.
ffffc000`bf27f1e0 74 00 65 00 6c 00 5f 00-2d 00 5f 00 49 00 6e 00 t.e.l._.-._.I.n.
ffffc000`bf27f1f0 74 00 65 00 6c 00 36 00-34 00 5f 00 46 00 61 00 t.e.l.6.4._.F.a.
ffffc000`bf27f200 6d 00 69 00 6c 00 79 00-5f 00 36 00 5f 00 4d 00 m.i.l.y._.6._.M.
It looks like the initial session that terminated was ACPI which is the Advanced Configuration and Power Interface. ACPI defines a flexible and abstract hardware interface that provides a standard way to integrate power management features throughout a PC system, including hardware, operating system and application software.

IRQL_NOT_LESS_OR_EQUAL (a)

This indicates that Microsoft Windows or a kernel-mode driver accessed paged memory at DISPATCH_LEVEL or above.

This bug check is issued if paged memory (or invalid memory) is accessed when the IRQL is too high. The error that generates this bug check usually occurs after the installation of a faulty device driver, system service, or BIOS.

--------------------

1. RTCor64.sys is listed and loaded which is RivaTuner/EVGA Precision/MSI Afterburner (known BSOD issues w/Win7 & 8). Please uninstall ASAP!

2. If the above fails, I would go as far to say that we actually have a faulty HDD setup here, or a bad motherboard.

Regards,

Patrick

http://www.techsupportforum.com/forums/f299/ntoskrnl-exe-bsod-839274.html
Relevancy 42.57%

Recently i've been encountering a whole lot of (ntoskrnl.exe) - BSOD 124 blue screens At first the error I was receiving was BSOD - 124 (ntoskrnl.exe) e but I think I fixed that Now I am getting this error Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode BCP BCP FFFFFA E BCP BCP OS Version Service Pack Product Files that help describe the problem C Windows Minidump - - dmp C Users user AppData Local Temp WER- - sysdata xml Read our privacy statement online Windows Privacy Statement - Microsoft Windows If the online BSOD - 124 (ntoskrnl.exe) privacy statement is not available please read our privacy statement offline C Windows system en-US erofflps txt ----------------------------- According to BSOD - 124 (ntoskrnl.exe) BlueScreenViewer it was caused by ntoskrnl exe From what i understand it may have come from hardware malfunctions or something corrupt in the windows update Either way it is severly infringing on my ability to play games and basically do anything that takes up a lot of my RAM I have run multiple Memtests and found zero errors there surprisingly I do not think the problem is overheating because I keep my computer clean for the most part and I have a fan I have also done a few backups just in case I need to redownlaod windows However since I have had to get this current computer repaired or times I would like to have the least painful process and hopefully an easy way out As of right now I've had bluescreens in the past weeks or so and there's no common pattern to when it freezes All I know is that there is something wrong with my hardware or possibly a motherboard issue Any help on this would be greatly appreciated Attached below is the DMP files from my bluescreen earlier today hopefully I didn't mess anything up EDIT Here's some other crash files from event viewer Log Name Application Source Microsoft-Windows-WMI Date PM Event ID Task Category None Level Error Keywords Classic User N A Computer user-PC Description Event filter with query quot SELECT FROM InstanceModificationEvent WITHIN WHERE TargetInstance ISA quot Win Processor quot AND TargetInstance LoadPercentage gt quot could not be reactivated in namespace quot root CIMV quot because of error x Events cannot be delivered through this filter until the problem is corrected Event Xml lt Event xmlns quot http schemas microsoft com win events event quot gt lt System gt lt Provider Name quot Microsoft-Windows-WMI quot Guid quot edeee - afe- -b -d c b b f quot EventSourceName quot WinMgmt quot gt lt EventID Qualifiers quot quot gt lt EventID gt lt Version gt lt Version gt lt Level gt lt Level gt lt Task gt lt Task gt lt Opcode gt lt Opcode gt lt Keywords gt x lt Keywords gt lt TimeCreated SystemTime quot - - T Z quot gt lt EventRecordID gt lt EventRecordID gt lt Correlation gt lt Execution ProcessID quot quot ThreadID quot quot gt lt Channel gt Application lt Channel gt lt Computer gt user-PC lt Computer gt lt Security gt lt System gt lt EventData gt lt Data gt root CIMV lt Data gt lt Data gt SELECT FROM InstanceModificationEvent WITHIN WHERE TargetInstance ISA quot Win Processor quot AND TargetInstance LoadPercentage amp gt lt Data gt lt Data gt x lt Data gt lt EventData gt lt Event gt Log Name System Source Microsoft-Windows-WHEA-Logger Date PM Event ID Task Category None Level Error Keywords User LOCAL SERVICE Computer user-PC Description A fatal hardware error has occurred Reported by component Processor Core Error Source Machine Check Exception Error Type Cache Hierarchy Error Processor ID The details view of this entry contains further information Event Xml lt Event xmlns quot http schemas microsoft com win events event quot gt lt System gt lt Provider Name quot Microsoft-Windows-WHEA-Logger quot Guid quot C C F C- F - E - F A- CFED quot gt lt EventID gt lt EventID gt lt Version gt lt Version gt lt Level gt lt Level gt lt Task gt lt Task gt lt Opcode gt lt Opcode gt lt Keywords gt x lt Ke... Read more

A:BSOD - 124 (ntoskrnl.exe)

here's something else I found in an error event:
Log Name: Application
Source: Microsoft-Windows-CAPI2
Date: 7/4/2014 12:05:22 AM
Event ID: 257
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: user-PC
Description:
The Cryptographic Services service failed to initialize the Catalog Database. The ESENT error was: -550.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-CAPI2" Guid="{5bbca4a8-b209-48dc-a8c7-b23d3e5216fb}" EventSourceName="Microsoft-Windows-CAPI2" />
<EventID Qualifiers="0">257</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2014-07-04T05:05:22.679808100Z" />
<EventRecordID>4296</EventRecordID>
<Correlation />
<Execution ProcessID="1172" ThreadID="2200" />
<Channel>Application</Channel>
<Computer>user-PC</Computer>
<Security />
</System>
<EventData>
<Data>-550</Data>
</EventData>
</Event>

http://www.sevenforums.com/bsod-help-support/336835-bsod-124-ntoskrnl-exe.html
Relevancy 42.57%

Hi!

For a couple of weeks now I'm using Windows 8.1 (upgraded from a Win 8 installation). Everything went fine until yesterday when I got my first BSOD on Win 8.1. Today it happened again. The causes seem to be the same but I hope for your analysis and help!

Thanks in advance

A:BSOD with ntoskrnl.exe

Your BIOS dates from 2008. Please check at the manufacturer's website to see if there are any BIOS updates available for your system. Also check the readme file to see if they apply to the problems that you are having. Please be advised that flashing the BIOS is a very unforgiving process - and one mistake can physically damage your motherboard.

There's a good chance that this system isn't compatible with Win8.1 - and despite our best efforts you may not be able to make the system stable. If that is the case, your options are to revert to Win8, Win7, or even WinVista to achieve stability. Good luck!

SSD's were temperamental when they first came out, but their reliability has improved greatly over the last year or two. There are 2 things that MUST be checked on systems with BSOD's and SSD's:




1) That the SSD firmware is the latest available for the SSD. I usually can't see this info in the reports, so I rely on you to check it.
2) That the storage controller drivers on the motherboard are the most recent. They must date from late 2012 or later. This is ALL controllers, not just the one that the SSD is attached to. If involved these should be visible in the memory dump - but it doesn't hurt to check manually.



ATI Tool may not be compatible - please uninstall it to test.

Please note the drivers below that date from before the release of Windows 8.1 (26 Oct 2013) - check to see that each and every one is compatible w/Windows 8.1 (at the manufacturer's website). If not, you must either remove the device and it's software - or locate a Windows 8.1 compatible update on the web.

If all of this doesn't stop the BSOD's, please run Driver Verifier according to these instructions: Driver Verifier Settings
Analysis:
The following is for informational purposes only.

Code:
**************************Thu Nov 21 15:18:58.765 2013 (UTC - 5:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\112113-14718-01.dmp]
Windows 8 Kernel Version 9600 MP (4 procs) Free x64
Built by: 9600.16422.amd64fre.winblue_gdr.131006-1505
System Uptime:0 days 23:02:39.547
Probably caused by :Unknown_Image ( ANALYSIS_INCONCLUSIVE )
BugCheck 109, {a3a01f5892427a38, b3b72bdee4c27a7b, fffff80186220000, 3}
BugCheck Info: CRITICAL_STRUCTURE_CORRUPTION (109)
Arguments:
Arg1: a3a01f5892427a38, Reserved
Arg2: b3b72bdee4c27a7b, Reserved
Arg3: fffff80186220000, Failure type dependent information
Arg4: 0000000000000003, Type of corrupted region, can be
0 : A generic data region
1 : Modification of a function or .pdata
2 : A processor IDT
3 : A processor GDT
4 : Type 1 process list corruption
5 : Type 2 process list corruption
6 : Debug routine modification
7 : Critical MSR modification
BUGCHECK_STR: 0x109
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
FAILURE_BUCKET_ID: BAD_STACK
CPUID: "Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz"
MaxSpeed: 2400
CurrentSpeed: 2400
BIOS Version F4a
BIOS Release Date 07/29/2008
Manufacturer Gigabyte Technology Co., Ltd.
Product Name EP35-DS3
??????????????????????????????????????????????????????????????????????????????????????``
**************************Wed Nov 20 16:15:34.141 2013 (UTC - 5:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\112013-11312-01.dmp]
Windows 8 Kernel Version 9600 MP (4 procs) Free x64
Built by: 9600.16422.amd64fre.winblue_gdr.131006-1505
System Uptime:0 days 4:33:24.923
Probably caused by :Unknown_Image ( ANALYSIS_INCONCLUSIVE )
BugCheck 109, {a3a01f58947ce7be, b3b72bdee6fce7f1, fffff80050c20000, 3}
BugCheck Info: CRITICAL_STRUCTURE_CORRUPTION (109)
Arguments:
Arg1: a3a01f58947ce7be, Reserved
Arg2: b3b72bdee6fce7f1, Reserved
Arg3: fffff80050c20000, Failure type dependent information
Arg4: 0000000000000003, Type of corrupted region, can be
0 : A generic data region
1 : Modification ... Read more

http://www.eightforums.com/bsod-crashes-debugging/35970-bsod-ntoskrnl-exe.html
Relevancy 42.57%

I have a couple of times suffered a couple BSOD's. I have for a few days installed a new HDD for an upgrade and therefore reinstalled windows. I have again received a BSOD 0x0000000A IRQL_NOT_LESS_OR_EQUAL.

BSOD was received when I was moving movie file from a filserver on my network.

What to do?

A:ntoskrnl.exe BSOD

  
Quote: Originally Posted by webnoob


I have a couple of times suffered a couple BSOD's. I have for a few days installed a new HDD for an upgrade and therefore reinstalled windows. I have again received a BSOD 0x0000000A IRQL_NOT_LESS_OR_EQUAL.

BSOD was received when I was moving movie file from a filserver on my network.

What to do?



If you wish to have others assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder. The procedure:

* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Start your own thread in the "Crashes and Debugging" section of the forum and attach the ZIP archive to your post using the "paperclip" (file attachments) button.
* Briefly describe the problem history and circumstances in the same post. Somebody will attend to your query as soon as possible.
Thanks

Ken

http://www.sevenforums.com/bsod-help-support/97010-ntoskrnl-exe-bsod.html
Relevancy 42.57%

Hi,

I'm getting frequent blue screens which apparently occur from ntoskrnl.exe. Please see attached zip file from SF Diagnostic Tool

Thanks in advance

A:BSOD on ntoskrnl.exe

Sorry for the delay in responding. There just aren't that many people who do BSOD analysis, so at times we get a bit overwhelmed!

This device has problems in Device Manager:





Not Available ACPI\SMO8800\1 The drivers for this device are not installed.



This is most likely the Dell Free Fall Sensor. Please download and install the latest, Win8.1 compatible driver for this device.

Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable! :

qicflt.sys Thu Jul 1 21:46:34 2010 (4C2D44FA)
QicFilterDriver-64Bits from Quanta Computer/Dell Webcam Driver
http://www.carrona.org/drivers/driver.php?id=qicflt.sys

HECIx64.sys Tue Oct 19 19:33:43 2010 (4CBE2AD7)
Intel Management Engine Interface
http://www.carrona.org/drivers/driver.php?id=HECIx64.sys

BazisVirtualCDBus.sys Mon Aug 8 14:11:12 2011 (4E4026C0)
WinCDEmu virtual CDROM driver - Bazis Inc
http://www.carrona.org/drivers/driver.php?id=BazisVirtualCDBus.sys

In addition, I'd suggest that you check the drivers below that are dated earlier than 26 Oct 2013 (the release of Win8.1) and ensure that all of those are truly compatible w/Win8.1

Analysis:
The following is for informational purposes only.

Code:
**************************Fri Nov 15 14:11:57.965 2013 (UTC - 5:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\111513-14781-01.dmp]
Windows 8 Kernel Version 9600 MP (4 procs) Free x64
Built by: 9600.16422.amd64fre.winblue_gdr.131006-1505
System Uptime:0 days 0:00:40.693
Probably caused by :wininit.exe
BugCheck EF, {ffffe00002fc6080, 0, 0, 0}
BugCheck Info: CRITICAL_PROCESS_DIED (ef)
Arguments:
Arg1: ffffe00002fc6080, Process object or thread object
Arg2: 0000000000000000, If this is 0, a process died. If this is 1, a thread died.
Arg3: 0000000000000000
Arg4: 0000000000000000
PROCESS_NAME: wininit.exe
BUGCHECK_STR: 0xEF_2fd1040
FAILURE_BUCKET_ID: 0xEF_2fd1040_IMAGE_wininit.exe
CPUID: "Intel(R) Core(TM) i5-2410M CPU @ 2.30GHz"
MaxSpeed: 2300
CurrentSpeed: 2295
BIOS Version A19
BIOS Release Date 09/07/2012
Manufacturer Dell Inc.
Product Name Dell System XPS L702X
??????????????????????????????????????????????????????????????????????????????????????``
**************************Fri Nov 15 13:05:02.047 2013 (UTC - 5:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\111513-12906-01.dmp]
Windows 8 Kernel Version 9600 MP (4 procs) Free x64
Built by: 9600.16422.amd64fre.winblue_gdr.131006-1505
System Uptime:0 days 0:00:13.774
*** ERROR: Module load completed but symbols could not be loaded for Ntfs.sys
Probably caused by :Ntfs.sys ( Ntfs+16e57 )
BugCheck 24, {b500190637, ffffd00022c23c18, ffffd00022c23420, fffff80000915e57}
BugCheck Info: NTFS_FILE_SYSTEM (24)
Arguments:
Arg1: 000000b500190637
Arg2: ffffd00022c23c18
Arg3: ffffd00022c23420
Arg4: fffff80000915e57
PROCESS_NAME: svchost.exe
BUGCHECK_STR: 0x24
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
FAILURE_BUCKET_ID: 0x24_Ntfs+16e57
CPUID: "Intel(R) Core(TM) i5-2410M CPU @ 2.30GHz"
MaxSpeed: 2300
CurrentSpeed: 2295
BIOS Version A19
BIOS Release Date 09/07/2012
Manufacturer Dell Inc.
Product Name Dell System XPS L702X
??????????????????????????????????????????????????????????????????????????????????????``
**************************Fri Nov 15 06:55:46.234 2013 (UTC - 5:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\111513-12531-01.dmp]
Windows 8 Kernel Version 9600 MP (4 procs) Free x64
Built by: 9600.16422.amd64fre.winblue_gdr.131006-1505
Sys... Read more

http://www.eightforums.com/bsod-crashes-debugging/35570-bsod-ntoskrnl-exe.html
Relevancy 42.57%

Hi,
For some time I've been having problems with BSOD's from time to time. It appeared once a week or so what was quite acceptable. Unfortunately nowadays I bought myself a new SSD drive, reinstalled Win7 and since that blue screens seem to happen more and more often. I've updated system files using windows update, updated drivers using Slim Drivers, updated BIOS, run memtest without an error, all with no result.

All the BS's are connected with ntoskrnl.exe.

OS - Windows 7 x64 box reinstalled this week
age of hardware: from about 5 years (cpu) to quite new (SSD)

desktop
pentium dual core 2.0 @ 2.9 (overclocked 99% of life)
MSI g41M
4 GB Ram DDR3
Sapphire Radeon 5670
SSD Adata 128 GB
Seagate USB 2.0 160 GB HDD
Modecom 350W

Help will be really appreciated.

A:BSOD (ntoskrnl) - please help

Hi,

I'm not even going to bother to look at the dumps until you do two things (and this is not because I am being rude or lazy, but because it's essentially worthless to do so for these two reasons):


Quote:




pentium dual core 2.0 @ 2.9 (overclocked 99% of life)




^^ Set the system to defaults for now and for troubleshooting purposes. If your overclock was not a contribution to the crashes, you can put it right back at the end. As of right now though, an overclock is quite a possibility. Also, you've had it for 5 yrs and it's been overclocked for almost all of that time, very likely on its way out which we'll find out after a CMOS clear for defaults.


Quote:




I bought myself a new SSD drive




Update the firmware of the SSD to the latest version if not already.

If you still crash after both of the above, especially #1, we'll get to work.

Regards,

Patrick

http://www.techsupportforum.com/forums/f299/bsod-ntoskrnl-please-help-806001.html
Relevancy 42.57%

For the better part of a year I ve been trying to figure out why I get random BSOD almost please!) ntoskrnl.exe (Help BSOD always cause by ntoskrnl exe ntoskrnl exe cd and ntoskrnl exe b I just about tried everything I could read about and I m starting to suspect that it s a hardware issue The strange thing is that quite a few times my computer crashes after my browser has crashes too Also it almost never crashes when playing games I ve reinstalled Windows a few times And run Chkdsk many times I ve tested my ram for hours tested my harddisk stress tested my graphic cards and CPU I ve tried using both the OEM drivers and the newest drivers Tried BSOD ntoskrnl.exe (Help please!) with and without windows updates I know AVG daemon tools and mcafee sometimes causes problems so they re not installed And probably tried a few things I can t remember right now Now I m hoping someone here can help or at least figure out what exactly the problem is I BSOD ntoskrnl.exe (Help please!) suspect it might be my Intel Graphics Card For a long time I suspected my Wifi-thingy but the the computer BSOD ntoskrnl.exe (Help please!) should crash while playing online games right Also I don t if it can be ram problems that memtest doesn t pick up All the help I can get I greatly appreciated P s First post here so I hope everything is as it should be

A:BSOD ntoskrnl.exe (Help please!)

It might be a hardware error.

Code:
fffff880`035ca858 fffff800`030f65a3 nt!KeBugCheckEx
fffff880`035ca860 fffff800`03077cae nt! ?? ::FNODOBFM::`string'+0x43801
fffff880`035ca9c0 fffff880`04474d6b nt!KiPageFault+0x16e
fffff880`035cab50 fffff880`04475cb6 umbus!UMBus_AssignHardwareIDs+0x107
fffff880`035cabd0 fffff880`044748c6 umbus!UMBus_CreatePdo+0x1da
fffff880`035caf40 fffff880`00f1be8d umbus!UMBus_EvtDeviceListCreatePdo+0x8a
fffff880`035caf70 fffff880`00efeb0e Wdf01000!FxChildList::CreateDevice+0xbd
fffff880`035cb3c0 fffff880`00efecae Wdf01000!FxChildList::ProcessBusRelations+0x79e
fffff880`035cb470 fffff880`00eedd2f Wdf01000!FxPkgPnp::HandleQueryBusRelations+0xca
fffff880`035cb530 fffff880`00eed5d7 Wdf01000!FxPkgFdo::_PnpQueryDeviceRelations+0x6f
fffff880`035cb570 fffff880`00eec79a Wdf01000!FxPkgPnp::Dispatch+0x18f
fffff880`035cb5d0 fffff880`00eec866 Wdf01000!FxDevice::Dispatch+0x19a
fffff880`035cb610 fffff800`03523d26 Wdf01000!FxDevice::DispatchWithLock+0xa6
fffff880`035cb650 fffff800`034364ae nt!IovCallDriver+0x566
fffff880`035cb6b0 fffff800`0343681a nt!PnpAsynchronousCall+0xce
fffff880`035cb6f0 fffff800`03438b67 nt!PnpQueryDeviceRelations+0xfa
fffff880`035cb7b0 fffff800`0346915c nt!PipEnumerateDevice+0x117
fffff880`035cb810 00000000`00000000 nt!PipProcessDevNodeTree+0x21c
Those UserMode Root Bus enumerator entries making me think that hardware tests should be done at first.

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

Stress test the CPU.
Hardware - Stress Test With Prime95

Let us know the results.

http://www.sevenforums.com/bsod-help-support/309852-bsod-ntoskrnl-exe-help-please.html
Relevancy 42.57%

Keep getting a BSOD mostly caused my the ntoskrnl.exe driver. Happens randomly like when im surfing the web, or playing a computer game. I sent my computer to geek squad so they could look at it and they said it had no hardware problems. I last did a complete system restore around July 2010. Computer is only about 1 year old and has had BSOD for as long as i have had it.

Windows 7 Home Premium 64 bit
HP Pavilion dv6 notebook pc
Intel i7 Q 720 @ 1.60 GHz
NIVIDIA GeForce GT 320M