Windows Support Forum

BSOD right after laptop was resuming from sleep/hibernation

Q: BSOD right after laptop was resuming from sleep/hibernation

Hi!

I have a Sony Vaio VGN-CS35GN. It came pre-installed with Vista 32 bit, but I am now using a licensed institutional version of Windows 7 Professional 32-bit. There?s only one OS.

The laptop recently has a had a problem with cooling. If i was playing videos/ or even if the laptop was on for a few hours otherwise, it was shutting down immediately. But I did not get any BSODs then. I subsequently got it cleaned with a blower. But even then I had used it for a couple days after that without any BSOD.

Today, just a while back after i resumed it from sleep, it suddenly crased and showed the blue screen.

I have uploaded the SF tool report. Please let me know if you guys require anything else.

Relevancy 100%
Preferred Solution: BSOD right after laptop was resuming from sleep/hibernation

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: BSOD right after laptop was resuming from sleep/hibernation

Code:
BugCheck 50, {fdab4dc4, 0, 81fa04ff, 0}

Unable to load image \SystemRoot\System32\win32k.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys

Could not read faulting driver name
Probably caused by : win32k.sys ( win32k+1204ff )

Code:
Usual causes: Defective hardware (particularly memory - but not just RAM), Faulty system service, Antivirus, Device driver, NTFS corruption, BIOS
Install Service Pack 1:Learn how to install Windows 7 Service Pack 1 (SP1)
Service Pack 1 has provided many security and stability updates for Windows 7, which would be highly beneficial for your system.

>>Upload SystemInfo.txt<<Start
Type: cmd > Right-Click > Run As Adminstrator
Type this command: systeminfo.exe>C:\systeminfo.txt
Remove:


Code:
Start Menu\Programs\Probit Software
Start Menu\Programs\Probit Software\Easy Driver Pro
These driver updating programs are problematic, and often install incorrect or unstable drivers.

Reduce the number of programs at startup, to avoid any driver or program conflicts:Troubleshoot Application Conflicts by Performing a Clean Startup
Startup Programs - Change

http://www.sevenforums.com/bsod-help-support/286107-bsod-right-after-laptop-resuming-sleep-hibernation.html
Relevancy 87.73%

Hello This is my first post and I'm hopeful that you guys can help me with an issue I have a brand spanking new laptop un-boxed and setup days ago An overview and brief description of the problem below Overview Brand new laptop opened and set-up on Tuesday Dec th Booted with factory install of OS Windows Home After initial set-up I ran Windows Update and installed and ran all updates including an update to Windows to version Build After this I installed several applications and removed several more that I considered bloatware e g McAfee Antivirus Computer was operating fine the entire first day with no noticeable issues Problem Late in the day on Resuming Laptop Sleep/Hibernation Crashes with from BSOD no When day one I decided to run the Lenovo Companion app pre-loaded with my install It prompted me to download and install an updated Laptop Crashes When Resuming from Sleep/Hibernation with no BSOD driver which I did however after this it prompted me to restart the computer which I opted to do the next morning The computer went to sleep hibernate overnight and when I opened it to resume from sleep the next day as I logged in after seconds the screen went black and shut off not to sleep or hibernate but shut down completely I hit Laptop Crashes When Resuming from Sleep/Hibernation with no BSOD the power button and rebooted the shut down repeated more times before stabilizing Once I was up and running again I decided to reboot the machine thinking this may solve the problem when I rebooted and after a very lengthy restart on the screen minutes I got a BSOD with an error message DRIVER POWER STATE FAILURE At this point I contacted Lenovo tech support and they have me do a hard reset of the laptop and then update both graphics cards drivers Intel and NVIDIA which I did Things were working OK after this with no random crashes for the remainder of the day Currently The crashes have now continued the past days but only occur in the mornings as I wake resume the machine after overnight The laptop crashes - times in a row over the course of the first - minutes just after I log-in the screen goes black all lights go off except for the power light and I have to reboot the machine oddly if I put the machine to sleep during the day for several hours and resume later in the day the crashes do not occur There are no BSODs and there are no dump or mini-dump files saved as a result of these crashes there are however several errors and warnings in the event viewer which I can share when the time comes In the meantime I've attached the SysnativeFileCollectionApp zip and perfmon zip report files as instructed for a first post Thank you in advance for your assistance The system specs overview is as follows OS - Windows x Windows original OEM pre-installed version of OS Age of computer Sept hardware Age of OS installation - days old CPU Intel Core i - HQ CPU GHz Video Cards Intel HD Graphics NVIDIA GeForce GTX M System Manufacturer Lenovo Exact model number Y - Touch

http://www.bleepingcomputer.com/forums/t/599141/laptop-crashes-when-resuming-from-sleephibernation-with-no-bsod/
Relevancy 107.5%

I recently upsized my SSD drive and changed from a samsung to a larger crucial drive This is a custom built computer that is on it's second MB and cpu combo and had been stable for years until just recently with the new drive addition so I do not feel it is a driver or something along these lines I am unsure if it may be RAM or just a bad windows hibernation bit on resuming 64 from or BSOD sleep upon 7 SSD I used windows home server to re-image the c drive from the samsung BSOD upon resuming from sleep or hibernation on windows 7 64 bit to to the crucial drive It ran with no problems for several weeks and then the Blue screens BSOD upon resuming from sleep or hibernation on windows 7 64 bit started on resuming from sleep and hibernation I have included the zip file from the debugging bat file as instructed from these forums I have tried to add the dump file but the uploader is telling me it is an invalid file and not accepting it The blue screen does indicate that it is a kernal data inpage error It list off half a dozen error codes as well that I can add if needed Thanks for any help you can give

A:BSOD upon resuming from sleep or hibernation on windows 7 64 bit

The uploaded zip is empty. Post it following the Blue Screen of Death (BSOD) Posting Instructions.

http://www.sevenforums.com/bsod-help-support/324070-bsod-upon-resuming-sleep-hibernation-windows-7-64-bit.html
Relevancy 107.5%

For some reason my computer is frequently getting a BSOD after my computer returns from sleep or hibernation. I tried uninstalling newly installed software but that didn't work. What should I do? I've included an image of one of my BSOD errors and the SF Diagnostic .ZIP.

A:BSOD After Resuming From Sleep/Hibernation, Error

Perform a clean install of your SynTP.sys Synaptic Touch Pad Driver Driver Reference Table - SynTP.sys



   Tip
How to clean left over drivers
Sometimes drivers remain, not completely uninstalled. Follow this tutorial for complete removal of drivers of the particular program: How to Clean Left Over Driver Files with Driver SweeperClick on the Start
► Control Panel
► Programs
► Uninstall a program
► Uninstall everything related to the software.

Delete remnants of its drivers/older drivers using Driver Sweeper



Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

DRIVER_POWER_STATE_FAILURE (9f)
A driver has failed to complete a power IRP within a specific time (usually 10 minutes).
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: fffffa8004ee5e40, Physical Device Object of the stack
Arg3: fffff800045b1518, nt!TRIAGE_9F_POWER on Win7, otherwise the Functional Device Object of the stack
Arg4: fffffa8008b61c60, The blocked IRP

Debugging Details:
------------------

TRIAGER: Could not open triage file : e:\dump_analysis\program\triage\modclass.ini, error 2

DRVPOWERSTATE_SUBCODE: 3

IMAGE_NAME: ACPI.sys

DEBUG_FLR_IMAGE_TIMESTAMP: 4ce79294

MODULE_NAME: ACPI

FAULTING_MODULE: fffff88000f28000 ACPI

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

BUGCHECK_STR: 0x9F

PROCESS_NAME: System

CURRENT_IRQL: 2

STACK_TEXT:
fffff800`045b14c8 fffff800`02f448c2 : 00000000`0000009f 00000000`00000003 fffffa80`04ee5e40 fffff800`045b1518 : nt!KeBugCheckEx
fffff800`045b14d0 fffff800`02edf84c : fffff800`045b1618 fffff800`045b1618 00000000`00000000 00000000`00000001 : nt! ?? ::FNODOBFM::`string'+0x33af0
fffff800`045b1570 fffff800`02edf6e6 : fffffa80`08c49658 fffffa80`08c49658 00000000`00000000 00000000`00000000 : nt!KiProcessTimerDpcTable+0x6c
fffff800`045b15e0 fffff800`02edf5ce : 000001c7`5e840f61 fffff800`045b1c58 00000000`00bf4cf0 fffff800`03054088 : nt!KiProcessExpiredTimerList+0xc6
fffff800`045b1c30 fffff800`02edf3b7 : 0000006a`6f39d2c3 0000006a`00bf4cf0 0000006a`6f39d2bc 00000000`000000f0 : nt!KiTimerExpiration+0x1be
fffff800`045b1cd0 fffff800`02ecc90a : fffff800`0304fe80 fffff800`0305dcc0 00000000`00000001 fffff880`00000000 : nt!KiRetireDpcList+0x277
fffff800`045b1d80 00000000`00000000 : fffff800`045b2000 fffff800`045ac000 fffff800`045b1d40 00000000`00000000 : nt!KiIdleLoop+0x5a


STACK_COMMAND: kb

FOLLOWUP_NAME: MachineOwner

FAILURE_BUCKET_ID: X64_0x9F_3_SynTP_IMAGE_ACPI.sys

BUCKET_ID: X64_0x9F_3_SynTP_IMAGE_ACPI.sys

Followup: MachineOwner
---------
Start up
Keep less stuff at the start-up. Only anti-virus, this helps avoid driver conflicts and improves time to log in to windows.

Troubleshoot a Problem by Performing a Clean Startup in Windows 7 or Vista
How to Change, Add, or Remove Startup Programs in Windows 7

SFC /scannow to check windows for corruption:

How to Repair Windows 7 System Files with System File Checker
1. Click Start
2. In the search box, type Command Prompt
3. In the list that appears, right-click on cmd.exe and choose Run as administrator
4. In the command window that opens, type sfc /scannow and hit enter.

Daemon Tools/Alcohol %

Code:
Start Menu\Programs\DAEMON Tools Pro Public:Start Menu\Programs\DAEMON Tools Pro Public
Daemon Tools (and Alcohol % software) are known to cause BSOD's on some Win7 systems (mostly due to the sptd.sys driver, although we have seen dtsoftbus01.sys blamed on several occasions). Please uninstall the program, th... Read more

http://www.sevenforums.com/bsod-help-support/290544-bsod-after-resuming-sleep-hibernation-error.html
Relevancy 90.73%

Hi,

I have a Dell Dimension 3000 running 32-bit Windows 7. It started locking up either going into sleep, waking up from sleep, or waking from hibernation. It goes away if I pull out the Geforce GT 610 PCI card that I have installed. Putting the card into another system works fine, and sleep works normally. I am wondering if the motherboard is at fault here as I have just had the graphics card replaced by ZOTAC.

Specs:
Dell Dimension 3000
2 GB RAM
3 GHz Intel Pentium 4 HT
80 GB IDE HDD
IDE CD-RW
IDE DVD-RW
Floppy
Intel 537 PCI Modem

I have unhooked and disabled the floppy and two optical drives, but the problems continue. I also tried to boot Ubuntu live, but it would not start, until the graphics card was pulled.

Windows has also been reinstalled.

Any ideas?

A:Lockup after resuming from sleep/hibernation Dell Dimension 3000

Hello and welcome Goldfish now mate two things have you installed the latest drivers for that GPU? http://www.geforce.com/drivers and you might try running these too
http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html
http://www.sevenforums.com/tutorials/433-disk-check.html < if necessary include the /f and /r in the command line as per Option2

http://www.sevenforums.com/hardware-devices/366801-lockup-after-resuming-sleep-hibernation-dell-dimension-3000-a.html
Relevancy 86%

Hello Everyone:

I have seen the many posts about the BSOD. So I went to download the Windows Debugging Tools but each time it keeps complaining about missing files. This means I have no dumpcheck utility.

The problem occurs when I reopen my lid to wake up my laptop from sleep or hibernation. Sometimes it works fine and then other times it reboots and then after my login loads the message comes up about 'windows has recovered from an unexpected shutdown'. I went to Device Manager and right click to upgrade the drivers but Windows said they were already up-to-date. I also ensured that in Windows Update, I checked the optional downloads too. However, the problem still occurred.

I am hoping that the forum members will be able to assist using the crash files that I have attached. My system specs are on my profile page. Thanks.

Regards
hikarimay10

A:BSOD when laptop waking from sleep or hibernation

Update your NIC driver:
Broadcom NetLink (TM) Gigabit Ethernet
fffff880`07278000 fffff880`072d9000 k57nd60a Sat May 15 14:51:06 2010 (4BEE98BA)

Also check for new version of these drivers:
Mobile Intel(R) 4 Series Express Chipset Family
fffff880`0742b000 fffff880`07b32400 igdkmd64 Wed Sep 02 20:54:15 2009 (4A9EBF57)

Intel(R) ICH9M-E/M SATA AHCI Controller
fffff880`01271000 fffff880`0147b000 iaStor Tue Apr 13 18:44:16 2010 (4BC49F60)

Name [00000011] Atheros AR5B97 Wireless Network Adapter
fffff880`06ee1000 fffff880`07107000 athrx Fri May 07 02:00:58 2010 (4BE3583A)

Uninstall the Following programs:
Daemon Tools, make sure you get rid of the sptd.sys driver

http://www.sevenforums.com/bsod-help-support/258579-bsod-when-laptop-waking-sleep-hibernation.html
Relevancy 85.14%

Hey,

So I've been having recurring instances where my laptop would BSOD about 10-20 minutes after I resume it from hibernation (not sleep). The "System" process uses up a core (25% total CPU usage) the entire time before it BSODs. During this time, my USB ports are nonfunctional. In the end, I have to either force reboot or wait until it BSODs and reboots itself. I've also tried isolating the process causing "System" to hang, and found that it had to do with a USB process and hal.dll. I had no idea where to go after that.

I've only had this laptop for about 3 weeks, but wanted to clean install my own Win 7 Ultimate 64bit.

One last thing to mention is that the only USB device attached is the receiver dongle for my Logitech wireless mouse.

Thanks for the help.

A:BSOD after resuming from hibernation.

Hello hkai1015,
Please follow this troubleshooting steps:
1. Unplug and uninstall Wireless USB Mouse driver. (use a Wired one for testing)
2. Uninstall intelcoreseries24 gadget (WinRing0x64.sys)
3. Update Tppwr64v.sys (Levono Power Manager Driver).
It's very important since it can control power from Hibernating mode.
→ Lenovo Support - Download Drivers and Software (US)
4. Also update this driver:

Code:
psadd.sys Mon Feb 19 10:56:37 2007 → Lenovo Parties Service Access Device Driver (SMBIOS)
After that try to hibernate again and let us know the result.

LOG

Code:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Machine Name:
Kernel base = 0xfffff800`0200c000 PsLoadedModuleList = 0xfffff800`02251670
Debug session time: Fri Aug 12 16:57:12.544 2011 (GMT-8)
System Uptime: 0 days 9:12:50.434
Loading Kernel Symbols
...............................................................
................................................................
..............................................
Loading User Symbols
Loading unloaded module list
.........................
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa800634c060, fffff800028073d8, fffffa80075d3260}

Probably caused by : usbhub.sys

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

DRIVER_POWER_STATE_FAILURE (9f)
A driver is causing an inconsistent power state.
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: fffffa800634c060, Physical Device Object of the stack
Arg3: fffff800028073d8, Functional Device Object of the stack
Arg4: fffffa80075d3260, The blocked IRP

Debugging Details:
------------------
DRVPOWERSTATE_SUBCODE: 3

IRP_ADDRESS: fffffa80075d3260

DEVICE_OBJECT: fffffa800634c060

DRIVER_OBJECT: fffffa8005564510

IMAGE_NAME: usbhub.sys

DEBUG_FLR_IMAGE_TIMESTAMP: 4d8c0c15

MODULE_NAME: usbhub

FAULTING_MODULE: fffff88002a72000 usbhub

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

BUGCHECK_STR: 0x9F

PROCESS_NAME: Y?

CURRENT_IRQL: 0

LAST_CONTROL_TRANSFER: from fffff800020f6cd2 to fffff80002088c40

STACK_TEXT:
fffff800`02807388 fffff800`020f6cd2 : 00000000`0000009f 00000000`00000003 fffffa80`0634c060 fffff800`028073d8 : nt!KeBugCheckEx
fffff800`02807390 fffff800`020945fc : fffff800`028074c0 fffff800`028074c0 00000000`00000000 00000000`00000001 : nt! ?? ::FNODOBFM::`string'+0x34a90
fffff800`02807430 fffff800`02094496 : fffff880`02588a40 fffff880`02588a40 00000000`00000000 00000000`00000000 : nt!KiProcessTimerDpcTable+0x6c
fffff800`028074a0 fffff800`0209437e : 0000004d`3b1e93dc fffff800`02807b18 00000000`002071d8 fffff800`02202d88 : nt!KiProcessExpiredTimerList+0xc6
fffff800`02807af0 fffff800`02094167 : 00000011`4eb65dc2 00000011`002071d8 00000011`4eb65dec 00000000`000000d7 : nt!KiTimerExpiration+0x1be
fffff800`02807b90 fffff800`0208096a : fffff800`021fee80 fffff800`0220ccc0 00000000`00000001 fffff880`00000000 : nt!KiRetireDpcList+0x277
fffff800`02807c40 00000000`00000000 : fffff800`02808000 fffff800`02802000 ff... Read more

http://www.sevenforums.com/bsod-help-support/180628-bsod-after-resuming-hibernation.html
Relevancy 85.14%

Good Day

I have been having BSOD problems with my new Gigabyte Q1585N laptop almost from the time I bought it (about 3 to 4 months back) I thought that running Windows Updates would solve the problem - but it has not gone away. It gives the BSOD immediately after I log in after resuming from Hibernation. It happens regularly.

I'm a type of hands-on person with technology and don't like to send my laptop away for repairs for 2 weeks - what do I do without it in the meantime?

I have searched through this forum but it seems as though BSOD problems are quite specific. It also seems as though this forum has been able to assist many in solving their problems - hence my trying it out in hope as well.

I've attached the requested dump files. I would appreciate any help.

Thanks
Marius

A:BSOD after resuming from Hibernation

  
Quote: Originally Posted by MariusP


Good Day

I have been having BSOD problems with my new Gigabyte Q1585N laptop almost from the time I bought it (about 3 to 4 months back) I thought that running Windows Updates would solve the problem - but it has not gone away. It gives the BSOD immediately after I log in after resuming from Hibernation. It happens regularly.

I'm a type of hands-on person with technology and don't like to send my laptop away for repairs for 2 weeks - what do I do without it in the meantime?

I have searched through this forum but it seems as though BSOD problems are quite specific. It also seems as though this forum has been able to assist many in solving their problems - hence my trying it out in hope as well.

I've attached the requested dump files. I would appreciate any help.

Thanks
Marius


Memory corruption probably caused by a driver. please run these two tests

1-Memtest.

*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program.

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

RAM - Test with Memtest86+

2-Driver verifier






Quote:
I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.


Driver Verifier - Enable and Disable

http://www.sevenforums.com/bsod-help-support/183861-bsod-after-resuming-hibernation.html
Relevancy 85.14%

I recently reinstalled a fresh copy of Windows 7 on my computer, but have been having a bit of trouble with BSODs whenever I try to resume from hibernation. What happens is that it will show the windows POST screen when resuming, then will immediately get a BSOD. Anyone know what the issue is?

A:BSOD Resuming From Hibernation

Are you using a desktop?
If so then there is no need for hibernation, in fact it's not designed for desktops at all.

If you are using a laptop then you should roll back your graphics driver to an earlier version as these latest versions have caused a few issues.


Code:
fffff880`0f26c000 fffff880`0fec4000 nvlddmkm T (no symbols)
Loaded symbol image file: nvlddmkm.sys
Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
Image name: nvlddmkm.sys
Timestamp: Tue Mar 04 11:07:52 2014 (5315B408)
CheckSum: 00C20523
ImageSize: 00C58000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
You can do this from the device manager or by following these instructions:

NVIDIA Drivers - Avoid Problems

http://www.sevenforums.com/bsod-help-support/332230-bsod-resuming-hibernation.html
Relevancy 84.71%

Hi, i'm very new to these forums. ive had this problem for quite a while and i want to pinpoint why i'm getting BSOD. when i put my computer to sleep or hibernation, and wake it up my laptop restarts and i m prompted with the error:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 1000007e
BCP1: FFFFFFFFC0000005
BCP2: FFFFF880099E6824
BCP3: FFFFF8800B0734F8
BCP4: FFFFF8800B072D50
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

I will attach the mini-dump file for further information.
https://docs.google.com/file/d/0B3El...it?usp=sharing
(windows 7 home Premium 64 bit )

A:BSOD occurs when laptop goes under sleep or Hibernation, 0x1000007e

Blue Screen of Death (BSOD) Posting Instructions

http://www.sevenforums.com/bsod-help-support/278757-bsod-occurs-when-laptop-goes-under-sleep-hibernation-0x1000007e.html
Relevancy 83.42%

Hello, everyone. I'm new, and don't know much about inner workings of Windows, so I'm hoping a kind soul here would help me out. =)
I've been using Windows 7 since somewhere around mid last year, and had no problems. Built a new PC from ground up last November, and no problem until now. (I also reformatted somewhere last month due to that pesky "Win7 Antivirus" malware invading my PC.)

Anyway, the deal here is that I can't resume my PC from hibernation. Happened three times today. Until now, I almost NEVER shut down. And now I have no other choice. Anyway, I've attached the Performance Monitor report and the folder from jcgriff2's app. Could someone please help me? Thank you very much.

PS. I know people say this is due to SPTD, but I've used it with Daemon Tools since the first day I got Win7, and had no problems at all.

A:Win7 Ultimate x86 BSOD upon resuming after hibernation

Anyone?
Umm... I hope bumping is not against the rules. Really sorry if it is.

http://www.sevenforums.com/bsod-help-support/164695-win7-ultimate-x86-bsod-upon-resuming-after-hibernation.html
Relevancy 82.99%

Dear TSFers I sleep. problem Laptop SP1) upon to BCCode_9f hibernation (Win7 putting BSOD MSI or am MSI Laptop (Win7 SP1) BSOD BCCode_9f problem upon hibernation or putting to sleep. having some irregular BSOD problems for a while now Frequently when I put my laptop to hibernation or sleep mode it stays stuck with a black screen for a while only to end up in the BSOD BCCode f My Laptop is a GE -i M FD Win SP I have added the requested data in one file I put the PERFMON REPORT file in the Windows Vista folder The language of my laptop is set to Dutch I hope that it won't be too much af a problem I hope that you can help me out What was original installed OS on system -FreeDos I believe Is the OS an OEM version came pre-installed on system or full retail version YOU purchased it from retailer -Retail Age of system hardware -Bought it at November So roughly months now Age of OS installation - have you re-installed the OS -Once re-installed after it didn't install correct the first time After that never Same as Age of system roughly months CPU -Intel i - M CPU GHz Core Video Card -Nvidia GeForce GT M MotherBoard -GE OC OE though not sure if it's an OEM Power Supply -MSI The same one that came with the laptop System Manufacturer -Micro-Star International Co Ltd though not sure if it's an OEM Exact model number if laptop check label on bottom -G -N PR -CB Laptop or Desktop -Laptop P S could it be that this has something to do with KB I read something about whether having installed that update or not could also have some influence on this

A:MSI Laptop (Win7 SP1) BSOD BCCode_9f problem upon hibernation or putting to sleep.

Bump :)

Since posting this, I have yet to have another BSOD. But it is just a matter of time, as it usually happens once a week or so.

http://www.techsupportforum.com/forums/f299/msi-laptop-win7-sp1-bsod-bccode_9f-problem-upon-hibernation-or-putting-to-sleep-874034.html
Relevancy 82.99%

My system was never able to resume from sleep Tried several things BIOS settings settings for power management etc Thought it could be related to recovery software or other installed drivers etc But now I replaced my harddisk with a SSD did a fresh install of W Ultimate Removed all possible hardware tv card usb devices except keyboard mouse at or from from sleep resuming not while resuming BSOD all sleep, Tried fail save options in BIOS and optimized settings as well but no luck Got most windows updates in place installed all the latest drivers from the motherboard and graphics card latest bios drivers and still getting BSOD Who can help me solving this so I can save lots of energy Followed the manual to attach zip file with minidumps etc Please let me know when additional info is required Details about what happens When I put my BSOD while resuming from sleep, or not resuming from sleep at all system into sleep it goes well When I try to wake my system often nothing happens and I BSOD while resuming from sleep, or not resuming from sleep at all have to shut it down holding start button or I get back my desktop but within a few seconds I get a BSOD If I have seen it well I posted several minidumps so I hope it is not too difficult to find the ones related to the resume from BSOD while resuming from sleep, or not resuming from sleep at all sleep Kind regards Michel

A:BSOD while resuming from sleep, or not resuming from sleep at all

Welcome aboard

Your crash dumps are not showing any finite probable cause. In such a situation, it is better to enable Driver Verifier to monitor the drivers.

Driver Verifier - Enable and Disable

Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

Let us know the results, with the subsequent crash dumps, if any.

http://www.sevenforums.com/bsod-help-support/256028-bsod-while-resuming-sleep-not-resuming-sleep-all.html
Relevancy 82.13%

Hi I've got a Toshiba Satellite Pro A yrs old Intel core CPU GHz GB RAM sleep and Laptop resuming to from sleep Hanging going issue, with Vista Business SP Laptop sleep issue, Hanging going to and resuming from sleep bit and Laptop sleep issue, Hanging going to and resuming from sleep often when I put it to sleep it will hang or crash on resume forcing me to to do a hard shut down Sometimes the screen will just be totally black and hang and sometimes it will get to vista's quot resuming quot splash screen or even the login screen Laptop sleep issue, Hanging going to and resuming from sleep and then hang crash Often the disk activity LED will remain on indefinitely due to the hang even though I can't hear any disk activity As far as I'm aware all my drivers are up to date I'm just so fed up with loosing documents and personal settings now I've got to do something about it and from googling it seems this is a pretty widespread problem but I've not come across a solution that's worked for me - I've even installed the extra KB patch that was meant to fix it Also sometimes when I put it to sleep fully charged and not use it for a a few hours I find that the laptop has lost power during sleep because the battery has been run flat and the ventilation grille feels warm even though I know that the battery can normally last much much longer on sleep Is it possible that the computer resumed itself from sleep to hibernate after mins on battery as my power settings dictate and then crashed whilst resuming causing it to drain itself flat since it my laptop should have entered automatic hibernation on the critical battery warning unless it was unable to respond Is this a power setting problem I have hybrid hibernation turned off since I still lost my documents in the past with it on I tend to find that sleep goes wrong the most when I'm on the move and regularly changing power supplies from mains to battery I often unplug the laptop from the mains as it is entering sleep mode as I pack the laptop away or plug into mains during resume I had the laptop on mains without switching to battery all last week as I stayed at home and sleep was never failed once As soon as I was on the move and started switching supplies again this week sleep instantly failed twice in two days Also I've noticed it's unreliable when I remove or add a usb device i e usb mouse I've noticed that in Event Viewer that every time that resume hangs and I have to manually shut down and boot the laptop up again there's an unexpected shut down logged but prior to resuming and not at the time I manually forced the shut down --- hung on resume --- Put to sleep at PM Resumed at PM then hard shut down But unexpected shut down logged prior to this at PM EventData D C D C C B F --- battery ran flat after sleep ventilation grille still warm on resume --- Put to sleep at PM Resumed at PM then hard shut down But unexpected shut down logged prior to this at PM EventData D B D B C B CDA See attachment for more details Sorry for all the details but hopefully that'll help getting to the right solution faster Thanks very much

http://www.techsupportforum.com/forums/f217/laptop-sleep-issue-hanging-going-to-and-resuming-from-sleep-350149.html
Relevancy 81.27%

I've been getting a BSOD about 5 - 10mins after resuming from Hibernation. I used bluescreenview to look at the dump file since I can't seem to install Debugging tools for windows, and found that ntsokrnl.exe was apparently causing it. I've tried using startup recovery to repair the boot.ini, it didn't find any problems and I used the driver verifier but, that doesn't seem to be turning up any results. I don't know what else I should try, so here I am. Any help would be great.

A:BSOD Driver Power State Failure after resuming from Hibernation

DAEMON Tools is known to crash window. Uninstall and test, report back.

http://www.sevenforums.com/bsod-help-support/246756-bsod-driver-power-state-failure-after-resuming-hibernation.html
Relevancy 81.27%

Stared getting this again. Seemed like it was fixed after removing DeamonTools but apparently not. Here's the latest dump files and info.

A:BSOD Driver Power State Failure after resuming from Hibernation

Uninstall ASUS Charger Driver (aicharger).

http://www.sevenforums.com/bsod-help-support/248267-bsod-driver-power-state-failure-after-resuming-hibernation.html
Relevancy 77.83%

I installed Windows 7 Professional and everything works fine accept that my laptop crashes everytime i try to continue my work from sleep. There is no BSoD, and the sleep part works (the light indicating it works fine).

I have Windows 7 Professional (build 7600), Acer Aspire 5720Z.

Tell me what more info you need and I'll post it.

Thank you!
 

Relevancy 77.83%

About 75% of the time, when I lift the lid to resume my laptop from sleep, the laptop will not resume immediately. The screen will remain black, the wifi light stays disabled, and while I can hear the fan, nothing else really happens.

Usually after anywhere from 3 to 20 seconds, though, the laptop will eventually wake up, and I believe it tends to be when the hard drive actually starts spinning -- the hard drive light will blink and I'll hear the faint 'click' of the hard disk.

The resume used to be more or less instant. I've reformatted since I first noticed this problem, yet I still have it, which makes me think it might be a hardware issue.

Any ideas on if I can do anything to fix it?

A:Laptop is delayed in resuming from sleep.

HB1547, you might want to check the timeout on your hard disk. It looks like your computer is trying to load the os and your hard disk is not ready. Check the timeouts in your power options to see if your hard disk is going to sleep and that would be a point to check.

Also, with today's hard disks, you really don't gain a lot with sleep or hibernate.

Rich

http://www.sevenforums.com/hardware-devices/253208-laptop-delayed-resuming-sleep.html
Relevancy 77.4%

Hi I've my fingers crossed for my first post as I've googled my BSOD problem but found that even for BSOD after resuming from SLEEP there are specific causes So here i BSOD resuming Sleep from after am posting my own specific BSOD problem as i realized this forum is the best place for it Ok my problem is I am getting BSOD whenever I put my computer to sleep and if i want to BSOD after resuming from Sleep resume it afterwards I recently performed System Recovery so my system is fresh and updated And i really dont have any kind of problem except this one I've attached GrabAll rar file The last BSOD gave me this Code Problem signature Problem Event BSOD after resuming from Sleep Name BlueScreen OS Version Locale BSOD after resuming from Sleep ID Additional information about the problem BCCode d BCP BCP BCP BCP FFFFF AEB OS Version Service Pack Product Files that help describe the problem C Windows Minidump - - dmp C Users Bineet AppData Local Temp WER- - sysdata xm Please i love you all who are always there to solve problems You all are really adorable people

A:BSOD after resuming from Sleep

Welcome to Sevenforums.

Your crash was caused by the Huawei MT882 USB router driver(glaui64.sys) which dates back to 2007 and is hence incompatible with Windows 7.

The driver along with the software using it must be either updated or removed. You could also directly use the Ethernet port instead of the USB connection, that will fix the problem. (Using the USB interface with Routers is generally not recommended).


Code:
glaui64.sys fffff880`055aa000 fffff300`055bc000 0xfffffa8000012000 0x46289e56 20/04/2007 15:04:54

Code:
BugCheck D1, {2, 2, 1, fffff880055aeb67}

Unable to load image glaui64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for glaui64.sys
*** ERROR: Module load completed but symbols could not be loaded for glaui64.sys
Probably caused by : glaui64.sys ( glaui64+4b67 )

http://www.sevenforums.com/bsod-help-support/263206-bsod-after-resuming-sleep.html
Relevancy 77.4%

Hello This is my first time here so please forgive me and feel free to correct me if I'm doing anything incorrectly I've been Googling this problem extensively but haven't been able to find a fix I'm getting an oddly inconsistent BSOD when my computer resumes from Sleep But it doesn't happen every time Most BSOD resuming from Sleep after of the time it resumes BSOD after resuming from Sleep just fine but every few weeks I get this BSOD When the error occurs my computer semi-resumes when I move the mouse but it seems like it goes back to Sleep again after a few seconds of activity Then it resumes again and this happens back and forth several times until the BSOD appears Each time it resumes I only have a few seconds of functionality before it goes back into Sleep Sometimes I can reboot before I get the BSOD but it inevitably comes up when the computer is in the final stages of shutting down The error says DRIVER POWER STATE FAILURE Stop x f x x x bc x fb I used the SF Diag Tool to attach the Dump File and I have Win configured for a Kernel Dump I hope that's okay Please let me know if there's any info I may have unintentionally left out Thank you in advance for all of you help

A:BSOD after resuming from Sleep

The BSOD is caused by Display Link USB to video Download.

Code:
8d52b6ac 8b801100Unable to load image \SystemRoot\system32\drivers\dlkmdldr.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for dlkmdldr.sys
*** ERROR: Module load completed but symbols could not be loaded for dlkmdldr.sys
dlkmdldr+0x1100
Either update it from DisplayLink: Windows Software or uninstall it.

And, Disable USB Selective Suspense too.
USB Selective Suspend - Turn On or Off

For the other USB devices, first, detach all the USB devices other than the keyboard and mouse.
Then, Update the drivers for them all, including the keyboard and mouse, if any third party drivers are installed for them.

Avast is also failing there.

Code:
8d52b5f4 90ea8200 aswSnx+0xa0200
8d52b5f8 9e654474
8d52b5fc 90e4004c aswSnx+0x3804c
8d52b600 91cb3e90 aswSP+0x7e90
8d52b604 8d52b7a4
8d52b608 91cf7a28 aswSP+0x4ba28
8d52b60c 90ea8200 aswSnx+0xa0200
8d52b610 8d52b64c
8d52b614 90e4e7d1 aswSnx+0x467d1
8d52b618 00000004
8d52b61c 90e4e815 aswSnx+0x46815
8d52b620 1db8dc47
8d52b624 90ea82f8 aswSnx+0xa02f8
8d52b628 00000000
8d52b62c 90ea8318 aswSnx+0xa0318
Uninstall Avast using Avast Uninstall Utility. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.
Download, install and update those, and then run full system scans with both of them, one by one.

Let us know the results.

http://www.sevenforums.com/bsod-help-support/292434-bsod-after-resuming-sleep.html
Relevancy 77.4%

Hi all, I have been having an BSOD error report when resuming from sleep. Sometimes it will work fine, but generally it will start in BIOS giving me the option to start in safe mode etc. Starting normally always works with an error report waiting once windows starts. I tried going back to OEM version which was home premium x64(am using clean install of ultimatex64) via the f9 & back to factory default, but the problem persisted. I've read through other posts that it's often driver related.
hardware:
Asus UX31E Zenbook
4GB ram
128GB SSD
2nd gen i5
And i've reinstalled ultimate. Any help appreciated.

A:BSOD when resuming from sleep

Hello there!

Seems like the crashes didn't produce any dump files. But when search the Event logs and found X64_0x9F_3_POWER_DOWN_IMAGE_athrx.sys which is referring to your Atheros Wireless LAN driver. I would recommend to remove it and download a fresh copy and reinstall it. http://www.atheros.cz/atheros-wirele...et=40&system=5


Code:
Event[16317]:
Log Name: Application
Source: Windows Error Reporting
Date: 2012-08-16T20:00:22.000
Event ID: 1001
Task: N/A
Level: Information
Opcode: Info
Keyword: Classic
User: N/A
User Name: N/A
Computer: agr-PC
Description:
Fault bucket X64_0x9F_3_POWER_DOWN_IMAGE_athrx.sys, type 0
Event Name: BlueScreen
Response: Not available
Cab Id: 0

Problem signature:
P1:
P2:
P3:
P4:
P5:
P6:
P7:
P8:
P9:
P10:

Attached files:
C:\Windows\Minidump\081612-7269-01.dmp
C:\Users\agr\AppData\Local\Temp\WER-16770-0.sysdata.xml
C:\Users\agr\AppData\Local\Temp\WERAC83.tmp.WERInternalMetadata.xml

These files may be available here:
C:\Users\agr\AppData\Local\Microsoft\Windows\WER\ReportArchive\Kernel_0_0_cab_0bf9fa36

Analysis symbol: X64_0x9F_3_POWER_DOWN_IMAGE_athrx.sys
Rechecking for solution: 0
Report Id: 081612-7269-01
Report Status: 0

http://www.sevenforums.com/bsod-help-support/247018-bsod-when-resuming-sleep.html
Relevancy 77.4%

Long time lurker here, but now have a problem I'm struggling with, so had to sign up :)

Its a MCE, so sleeps a fair amount. Some days, every single resume from S3 sleep, it BSODs (STOP 0A). Sometimes it will run for days...

Minidump attached.

Any clues?

TIA,
IamTheBoy

A:BSOD resuming from sleep

Intel DG45ID
Q8200 Core2 Quad
Integrated Intel graphics
1.5Tb HDD on AHCI controller
Blackgold BGT6320 tuner
Hauppauge HVR2200 tuner

http://www.techsupportforum.com/forums/f299/bsod-resuming-from-sleep-658021.html
Relevancy 77.4%

Hi all, this is a post for a friend. She's getting BSOD's when resuming from Sleep Mode.

Here's the data:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 4105

Additional information about the problem:
BCCode: 7a
BCP1: C0604000
BCP2: C000000E
BCP3: 3BCB5880
BCP4: C0800000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\120209-19749-01.dmp
C:\Users\Jill\AppData\Local\Temp\WER-38501-0.sysdata.xml

The computer is a HP Touchsmart 500, running x86 retail home premium Windows 7.

I've attached a dump.

A:BSOD's Resuming From Sleep

has she got an ati graphics card?if so tell her to go back to earlier drivers,although i had a windows update for ati today.

http://www.sevenforums.com/bsod-help-support/44163-bsods-resuming-sleep.html
Relevancy 77.4%

anyone can check my dump file and find the cause maybe ?

suspecting my sb x-fi my self.

060211-6988-01.dmp

used to be 100% stable my rig but now it bsod sometimes after resuming sleep.

A:bsod after resuming sleep

ASACPI.sys the 2005 version is a huge cause of BSODs


   Information
The 2005 version of this driver is a known BSOD cause.
Please visit this link: ASUSTeK Computer Inc. -Support- Drivers and Download P7P55D LE
Scroll down to the Utilities category, then scroll down to the "ATK0110 driver for WindowsXP/Vista/Windows 7 32&64-bit" (it's about the 12th item down).
Download and install it.
Go to C:\Windows\System32\drivers to check and make sure that the ASACPI.sys file is date stamped from 2009 or 2010 (NOT 2005)

Update your Marvel Yukon Gigabit/network driver
http://www.marvell.com/support.html

Code:
ASACPI.sys fffff880`04c11000 fffff880`04c19000 0x00008000 0x42476c4c 28/03/2005 06:30:36
Download Malwarebytes
Install, update and run a system scan

http://www.sevenforums.com/bsod-help-support/167026-bsod-after-resuming-sleep.html
Relevancy 77.4%

For months I had Win7 installed and running without any incidents; I was using Microsoft Security Essentials. The other day I installed Win8, decided I hated it, and reformatted/installed Win7. This time I tried Avast 7 Free and things looked good for a while until I woke up my PC from Sleep mode then it crashed.

I appreciate the help.

A:BSOD after resuming from sleep

Hi auutumn,

Is this a recurring incident? I did notice it only happened on time in the syslog. Sometimes solitary flukes can occur that can "correct" themselves. Have you been able to confirm that this is a repeated incident when you wake the system from sleep?

As for the crashdump, it reported that the process wininit.exe terminated unexpectedly. Wininit is a temporarily used process that exists to initiate some other processes (primarily the desktop sessions) before it lets others do the rest of the work for the duration of Windows. Typically if something bad happens to it, it's during startup of a desktop session (each user logged on is a desktop session).

The error that caused Wininit to cave in was an I/O error (c0000006), which means something ugly happened between your RAM and your disk (primarily the paging file on your disk). What exactly caused the issue I'm not sure, but it may very well be a hardware problem.

I personally would recommend doing hardware tests, starting with Seatools running all basic tests on the Windows drive, and then at least 7+ passes on your memory with Memtest. Links to the two applications are below.

| Seagate

www.memtest.org

http://www.sevenforums.com/bsod-help-support/217280-bsod-after-resuming-sleep.html
Relevancy 77.4%

I've been getting the BSOD recently when resuming my computer from sleep. I was going to reformat but id like to be able to correct the problem without taking that measure if possible. This problem is recent to the last few weeks.

Besides the BSOD on resume of sleep the system runs awesome

Attached is my BSOD dump & system file collection. The System health report is in the same folder.

Comp Specs
Windows 7 Pro Sp1
x64
full retail version

system is less then 1 year old haven't had problems with it
would like to avoid reinstalling if possible os been on system from the beginning

A:BSOD When resuming From Sleep

  
Quote: Originally Posted by Huc


I've been getting the BSOD recently when resuming my computer from sleep. I was going to reformat but id like to be able to correct the problem without taking that measure if possible. This problem is recent to the last few weeks.

Besides the BSOD on resume of sleep the system runs awesome

Attached is my BSOD dump & system file collection. The System health report is in the same folder.

Comp Specs
Windows 7 Pro Sp1
x64
full retail version

system is less then 1 year old haven't had problems with it
would like to avoid reinstalling if possible os been on system from the beginning


The most recent one Related to Protexis_Licensing from Protexis Inc. Note: Located in \%Program Files%\Common Files\Protexis\License Service\

There is also an error with disk hardware. I would run chkdsk

IF possible I would remove it. I have zero experience with it.
A- CHKDSK /R /F:

Run CHKDSK /R /F from an elevated (Run as administrator) Command Prompt.

Do this for each hard drive on your system.

When it tells you it can't do it right now - and asks you if you'd like to do it at the next reboot - answer Y (for Yes) and press Enter.

Then reboot and let the test run.

It may take a while for it to run, but keep an occasional eye on it to see if it generates any errors.

See "CHKDSK LogFile" below in order to check the results of the test.
B- Elevated Command Prompt:

Go to Start and type in "cmd.exe" (without the quotes)

At the top of the Search Box, right click on Cmd.exe and select "Run as administrator"
C-CHKDSK LogFile:

Go to Start and type in "eventvwr.msc" (without the quotes) and press Enter

Expand the Windows logs heading, then select the Application log file entry.

Double click on the Source column header.

Scroll down the list until you find the Chkdsk entry (wininit for Win7) (winlogon for XP).

Copy/paste the results into your next post.

Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\K\Desktop\Windows_NT6_BSOD_jcgriff2\060211-18517-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols;srv*e:\symbols
*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17592.amd64fre.win7sp1_gdr.110408-1631
Machine Name:
Kernel base = 0xfffff800`02e49000 PsLoadedModuleList = 0xfffff800`0308e650
Debug session time: Thu Jun 2 08:00:32.909 2011 (GMT-4)
System Uptime: 0 days 6:22:12.142
Loading Kernel Symbols
...............................................................
................................................................
................................
Loading User Symbols
Loading unloaded module list
...................
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 7A, {fffff6fb80008000, ffffffffc000000e, 107213880, fffff70001000000}

Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+37bba )

Followup: MachineOwner
---------

2: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* ... Read more

http://www.sevenforums.com/bsod-help-support/166885-bsod-when-resuming-sleep.html
Relevancy 77.4%

Hello, I just recently purchased a new Asus UX31e Ultrabook and have been experiencing a BSOD every time my system resumes from sleep. I had this problem on my old Dell XPS that had an SSD as well. Is this a known issue? I reinstalled a fresh copy of Windows 7 rather than deal with the OEM version that left me with a little more than 60gb free on a 128gb SSD.

? OS - Vista/ Windows 7 ? Windows 7
? x86 (32-bit) or x64 ? x64
? What was original installed OS on system? Windows 7 Ultimate x64
? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)? It is a full retail version
? Age of system (hardware) 1 week
? Age of OS installation - have you re-installed the OS? 1 day, yes

? CPU: Core i5
? Video Card
? MotherBoard
? Power Supply - brand & wattage

? System Manufacturer Asus
? Exact model number (if laptop, check label on bottom) UX31e-RSL8

A:BSOD after resuming from sleep

Hi -

"Unknown Image" showing up -


Code:

BugCheck F4, {3, fffffa8005931810, fffffa8005931af0, fffff80002d9edb0}
Probably caused by : csrss.exe
??????????????????????????????????????????????????????????????????????????????????????``
BugCheck 7A, {fffff6fc40009938, ffffffffc000000e, a2390860, fffff88001327788}
Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )
??????????????????????????????????????????????????????????????????????????????????????``
BugCheck F4, {3, fffffa8005933b30, fffffa8005933e10, fffff80002d9edb0}
Probably caused by : csrss.exe
??????????????????????????????????????????????????????????????????????????????????????``
BugCheck 7A, {fffff6fc40006d40, ffffffffc000000e, 8629a860, fffff88000da8000}
Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )
??????????????????????????????????????????????????????????????????????????????????????``
BugCheck 7A, {fffff6fc40006f90, ffffffffc000000e, 116cb7860, fffff88000df293c}
Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )
??????????????????????????????????????????????????????????????????????????????????????``
Could be hardware failure.

Run memtest86+ - http://www.techsupportforum.com/2863029-post5.html



Regards. . .

jcgriff2


`



BSOD SUMMARY

Code:

Loading Dump File [C:\Users\PalmDesert\_jcgriff2_\dbug\__Kernel__\120411-7378-01.dmp]
Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Debug session time: Sun Dec 4 10:23:54.060 2011 (GMT-5)
System Uptime: 0 days 0:02:19.324
BugCheck F4, {3, fffffa8005931810, fffffa8005931af0, fffff80002d9edb0}
Probably caused by : csrss.exe
PROCESS_NAME: csrss.exe
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0xF4
FAILURE_BUCKET_ID: X64_0xF4_IMAGE_csrss.exe
Bugcheck code 000000F4
Arguments 00000000`00000003 fffffa80`05931810 fffffa80`05931af0 fffff800`02d9edb0
??????????????????????????????????????????????????????????????????????????????????????``
Loading Dump File [C:\Users\PalmDesert\_jcgriff2_\dbug\__Kernel__\120411-6910-01.dmp]
Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Debug session time: Sun Dec 4 10:21:23.326 2011 (GMT-5)
System Uptime: 0 days 0:05:19.201
Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )
BUGCHECK_STR: 0x7a_c000000e
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
Bugcheck code 0000007A
Arguments fffff6fc`40009938 ffffffff`c000000e 00000000`a2390860 fffff880`01327788
??????????????????????????????????????????????????????????????????????????????????????``
Loading Dump File [C:\Users\PalmDesert\_jcgriff2_\dbug\__Kernel__\120411-6786-01.dmp]
Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Debug session time: Sun Dec 4 10:15:52.575 2011 (GMT-5)
System Uptime: 0 days 0:06:28.449
BugCheck F4, {3, fffffa8005933b30, fffffa8005933e10, fffff80002d9edb0}
Probably caused by : csrss.exe
PROCESS_NAME: csrss.exe
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0xF4
FAILURE_BUCKET_ID: X64_0xF4_IMAGE_csrss.exe
Bugcheck code 000000F4
Arguments 00000000`00000003 fffffa80`05933b30 fffffa80`05933e10 fffff800`02d9edb0
??????????????????????????????????????????????????????????????????????????????????????``
Loading Dump File [C:\Users\PalmDesert\_jcgriff2_\dbug\__Kernel__\120411-7316-01.dmp]
Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Debug session time: Sun Dec 4 10:09:12.670 2011 (GMT-5)
System Uptime: 0 days 0:08:06.544
Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )
BUGCHECK_STR: 0x7a_c000000e
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
Bugcheck code 0000007A
Arguments fffff6fc`40006d40 ffffffff`c000000e 00000000`8629a860 fffff880`00da8000
??????????????????????????????????????????????????????????????????????????????????????``
Loading Dump File [C:\Users\PalmDesert\_jcgriff2_\dbug\__Kernel__\120411-9999-01.dmp]
Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Debug session time: Su... Read more

http://www.techsupportforum.com/forums/f299/bsod-after-resuming-from-sleep-616133.html
Relevancy 77.4%

I've recently started to get occasional BSOD's after resuming from sleep. I'm running Windows 7 Ultimate x64 on a core i7 desktop. As far as I can tell, my drivers are up to date. I ran windows memory diagnostics and 4 passes of memtest86+ 4.0 without finding any RAM errors. Minidump files are attached. Thanks!

A:BSOD's after resuming from sleep

This is a known issue with Windows 7 Users, which is usually related to drivers. In the mean time to some what bypass these BSOD would be to disable your computer from sleeping.

I will assist you further if needed, Simply reply to this thread. I will as well be searching for a possible fix to this issue.

http://www.sevenforums.com/bsod-help-support/60282-bsods-after-resuming-sleep.html
Relevancy 76.97%

My laptop screen keeps flickering for like 4-5 minutes when ever i wake my laptop from sleep and on startup it stays on a blue screen for  7-8 minutes before going to login screen. how to i fix this? Please help. 

A:Laptop screen flickers while resuming from sleep.

Hi, Check if you still get these problems if you disable Windows 10 hybrid boot - you can do this as follows. Open Settings and select System.  Select Power and sleep, then click on Additional power settings - in the following window, click on 'Choose what the power button does' in the left hand pane. In the subsequent window, first click on 'Change settings that are currently unavailable' ( near the top of the Window ) and then remove the checkmark from the box against 'Turn on fast start-up (recommended)'.  Click the Save Settings button, then close any open windows and shutdown the notebook by right click the Start Menu icon, select Command Prompt (Admin) and click ?Yes? to the uac prompt. Type ( or copy and paste ) in the following command ( including spaces ) and hit enter. shutdown /s /t 0 Start the notebook and let Windows fully load. If this has corrected the issues, it may be worth turning Fast Start-up back on ? sometimes just deleting and re-creating the file will resolve the problem. Regards, DP-K

http://h30434.www3.hp.com/t5/Notebook-Boot-and-Lockup/Laptop-screen-flickers-while-resuming-from-sleep/td-p/5606593
Relevancy 76.54%

I just built a new computer and had it running stable for several days with all hardware except the graphics card and a new monitor. After plugging the new video card, I believe the system remained stable, but am not 100% confident since it only survived overnight. After plugging the new monitor (HP z2740w) and connecting via USB crashes started occurring when resuming from sleep.

Attached is the zip file requested in the instructions. If possible, can someone help me look at them? If you can, instructions for how to look at it myself would be really great!

I tried uninstalling the graphics drivers and the problem seems to have stopped for now, so I'm reinstalling to see if anything changes.

Windows 7 Pro 64 OEM (System Builder)
Everything in the machine is brand new except the hard drives.
Installation age is a few days.

A:BSOD Resuming from Suspend/Sleep

Quote:
"It's not a true crash, in the sense that the bluescreen was initiated only because the combination of video driver and video hardware was being unresponsive, and not because of any synchronous processing exception".

Since Vista, the "Timeout Detection and Recovery" (TDR) components of the OS video subsystem have been capable of doing some truly impressive things to try to recover from issues which would have caused earlier OSs like XP to crash.

As a last resort, the TDR subsystem sends the video driver a "please restart yourself now!" command and waits a few seconds.

If there's no response, the OS concludes that the video driver/hardware combo has truly collapsed in a heap, and it fires off that stop 0x116 BSOD.

If playing with video driver versions hasn't helped, make sure the box is not overheating.

Try removing a side panel and aiming a big mains fan straight at the motherboard and GPU.

Run it like that for a few hours or days - long enough to ascertain whether cooler temperatures make a difference.

If so, it might be as simple as dust buildup and subsequently inadequate cooling.

I would download cpu-z and gpu-z (both free) and keep an eye on the video temps CPUID - System & hardware benchmark, monitoring, reporting


STOP 0x116: VIDEO_TDR_ERROR troubleshooting

http://www.sevenforums.com/bsod-help-support/230158-bsod-resuming-suspend-sleep.html
Relevancy 76.54%

I have a refurbished Dell XPS 15 laptop from 5 months. Every time i resume my windows from sleep, after a few minutes i got different Blue Screen errors. I've re-installed my OEM windows, once (from recovery Partition) but still the same errors.
I've attached my mini-dumps files, with the report and some screenshots.
Hope somebody will help because i don't know if it's a software or a hardware problem.
Thank you!

My specs:
Windows 7 Home X64 Original OEM

A:BSOD after resuming from sleep. Various Errors.

Daemon Tools (and Alcohol % software) are known to cause BSOD's on Win7 systems due to the sptd.sys driver.
Please uninstall the program, then use the following free tool to ensure that the troublesome sptd.sys driver is removed from your system (pick the 32 or 64 bit system depending on your system's configuration): DuplexSecure - FAQ

5 memory dumps
5 different BSOD error codes
4 different causes blamed

This is most likely a hardware error - but this includes compatibility issues, low-level driver problems, and even malware.

I suspect that removing Daemon Tools will resolve this. But if it doesn't, post back and we'll see what else we can do. While waiting for a response, try the free diagnostics here: Hardware Diags

Further info on BSOD error messages available at: http://www.carrona.org/bsodindx.html

The following info is just FYI, I've already addressed the issues that I saw in the above paragraphs:
3RD PARTY DRIVERS PRESENT IN THE DUMP FILES
- Create a System Restore Point prior to doing any of this. DO NOT mess with the drivers themselves - leave the Windows\System32\drivers directory alone unless we specifically direct you to it!
- Please either update the older drivers from the device manufacturer's website - or uninstall them from your system. Reference links are included below.
- DO NOT use Windows Update or the Update Drivers function of Device Manager.
- Please feel free to post back about any drivers that you are having difficulty locating.
- Windows Update exceptions may be noted below for Windows drivers.

Code:

PxHlpa64.sys Tue Oct 20 14:08:42 2009 (4ADDFCAA)
iaStor.sys Wed Jan 12 20:50:12 2011 (4D2E5A54)
amdxata.sys Fri Mar 19 12:18:18 2010 (4BA3A3CA)
MpFilter.sys Wed Apr 06 16:07:29 2011 (4D9CC801)
stdcfltn.sys Fri Aug 20 14:05:01 2010 (4C6EC3CD)
nvpciflt.sys Fri Feb 18 12:53:43 2011 (4D5EB227)
dump_iaStor.sys Wed Jan 12 20:50:12 2011 (4D2E5A54)
dtsoftbus01.sys Mon Oct 17 08:12:30 2011 (4E9C1BAE)
SynTP.sys Fri Dec 17 11:51:13 2010 (4D0B9501)
GEARAspiWDM.sys Mon May 18 08:17:04 2009 (4A1151C0)
Accelern.sys Mon Dec 13 12:33:51 2010 (4D0658FF)
jumi.sys Mon Sep 28 18:48:52 2009 (4AC13D54)
igdkmd64.sys Mon Nov 29 00:23:11 2010 (4CF338BF)
HECIx64.sys Tue Oct 19 19:33:43 2010 (4CBE2AD7)
Rt64win7.sys Fri Jun 10 02:33:15 2011 (4DF1BAAB)
NETwNs64.sys Tue Dec 21 12:08:43 2010 (4D10DF1B)
nusb3xhc.sys Thu Feb 10 00:52:33 2011 (4D537D21)
qicflt.sys Thu Jul 01 21:46:34 2010 (4C2D44FA)
RTKVHD64.sys Tue Dec 14 04:14:04 2010 (4D07355C)
IntcDAud.sys Fri Oct 15 04:28:17 2010 (4CB810A1)
LEqdUsb.Sys Fri Sep 02 02:22:56 2011 (4E607640)
LHidEqd.Sys Fri Sep 02 02:22:59 2011 (4E607643)
LHidFilt.Sys Fri Sep 02 02:23:09 2011 (4E60764D)
LMouFilt.Sys Fri Sep 02 02:23:15 2011 (4E607653)
WibuKey64.sys Thu Dec 03 12:17:38 2009 (4B17F2B2)
TuneUpUtilitiesDriver64.sys Thu Sep 17 07:54:52 2009 (4AB2238C)
NisDrvWFP.sys Wed Apr 06 16:08:53 2011 (4D9CC855)
MpNWMon.sys Wed Apr 06 16:07:23 2011 (4D9CC7FB)
nvlddmkm.sys Fri Feb 18 12:53:00 2011 (4D5EB1FC)
nvBridge.kmd Fri Feb 18 12:47:15 2011 (4D5EB0A3)
nusb3hub.sys Thu Feb 10 00:52:32 2011 (4D537D20)
usbaapl64.sys Thu Apr 28 14:25:59 2011 (4DB9B137)
WinUsb.sys Sat Nov 20 05:43:56 2010 (4CE7A66C)

http://www.carrona.org/drivers/driver.php?id=PxHlpa64.sys
http://www.carrona.org/drivers/driver.php?id=iaStor.sys
http://www.carrona.org/drivers/driver.php?id=amdxata.sys
http://www.carrona.org/drivers/driver.php?id=MpFilter.sys
http://www.carrona.org/drivers/driver.php?id=stdcfltn.sys
http://www.carrona.org... Read more

http://www.sevenforums.com/bsod-help-support/211468-bsod-after-resuming-sleep-various-errors.html
Relevancy 76.54%

My win 7 x64 machine BSOD's whenever it resumes from sleep. This is a new install with no third party applications and yes all the drivers and bios have been updated. If anyone can read the mini dump to help me with clues as to what the heck might be causing this I'd greatly appreciate it!

A:BSOD when resuming from sleep win7 x64

Without looking at the .dmp's, this setting has been known to fix the type of problem you are describing.

http://www.sevenforums.com/bsod-help-support/43127-bsod-when-resuming-sleep-win7-x64.html
Relevancy 76.54%

SOLVED SEE BELOW See nd post I will try fix today Core i GIGABYTE GA-X A-UD R F BIOS BOARD REV GeIL Memory Model GV GB C TC GB x Triple Channel CORSAIR CMPSU- TX W ATX V EPS V XFX HD- X-ZNFC Radeon HD GB Western Digital Caviar Black WD AALS GB RPM MB Cache SATA Gb s Seagate TB ST AS Drives used for data storage NON RAID SATA Gb s Liteon DVD Burner Model iHAS - SATA Some old SB Audigy PCI sound card Problem Put computer into sleep mode manually or automatically via power settings When waking up computer Windows login screen is there and system is responsive About min later the system blue screens It appears to be I O disk related however I have exhausted all tests that I know One thing to note is that it seems like the hard drives don't power back up from sleep I can't tell for sure fans are noisy because the resuming x64 7 Windows sleep from BSOD when HDD led flashes consistently and equally off on off on before the crash happens Typing in the password to login to windows gives no results as once whatever is trying to happen times out the BSOD hits Tests CPU stress prime super pi passmark burnin HDD BSOD Windows 7 x64 when resuming from sleep tests Seagate tools and WD tools from DOS mode booting from cd etc Mem tests Memtest v via bootable CD ran for hrs without error I've also ran some H encodes for a few hours just dvd - gt mkv and no stability issues Pretty much as long as I leave the system running BSOD Windows 7 x64 when resuming from sleep nothing happens I can even game just fine Some of the errors I have found suggest cabling issues however I've replaced all the SATA cables I do need to test if the sleep BSOD happens without the Seagate storage drives attached All drives are internally SATA attached to the blue ports on the motherboard which I assume is the ICH R chipset's job This driver does get installed by the Intel Chipset drivers which I grabbed from Intel com today Other things Video drivers up to date BIOS up to date yadda yadda I won't be back to reading this until tomorrow afternoon USA EST timezone

A:BSOD Windows 7 x64 when resuming from sleep

heh, guess I should have read this sticky lol... seems like my problem.

http://www.sevenforums.com/bsod-help-support/69562-bsod-windows-7-x64-when-resuming-sleep.html
Relevancy 76.54%

Hi all,

My windows media centre machine is causing me a few problems. I can send it to sleep but when it wakes the screen stays black and after a few minutes a get a BSOD with DRIVER_POWER_STATE_FAILURE as the error. I have tried unplugging all usb and external devices but the fault continues. I have also updated my bios to the latest version.

I am uploading my dump file now to onedrive

Machine is

ASrock 870 Extreme 3 R2
Amd x6 1090t
8GB 1600 Ram
3 Sata hard drives
1 SSD Ocz solid.

Any help will be greatly appreciated. Thanks

A:BSOD When resuming from s3 sleep state

http://1drv.ms/1fP7gJ9

Memory Dump

http://www.eightforums.com/bsod-crashes-debugging/42380-bsod-when-resuming-s3-sleep-state.html
Relevancy 76.54%

Greetings all I was very thankful to find this Ivy from when Bridge resuming BSOD sleep helpful community online and appreciate any help you may be able to offer I have a new Ivy Ivy Bridge BSOD when resuming from sleep Bridge system k Z and it's rock solid under load I've literally virtual machines processing encrypted disk images at the same time it plays Civ V and it runs flawlessly Never had a single issue under load However when resuming from sleep the system will sometimes BSOD It doesn't happen every time but has occured about times in the last week or so I've tried to ensure that drivers are up to date One other symptom that may help to diagnose I've had to turn off the quot blank screen quot function because sometimes the screen won't come back after that The system appears to be running but the display never returns System specs - Windows x Home Premium OEM - i K stock clock - Asrock Z Extreme MB - MB Corsair RAM - W Raidmax PSU - PowerColor Radeon - Intel GB SSD Seagate Barracuda TB secondary SATA I've attached the dump ZIP as requested in the sticky The perfmon report is included in the ZIP folder Thanks again for any help you can offer Best regards Philip

A:Ivy Bridge BSOD when resuming from sleep

Hello and welcome to Seven Forums,

If you are overclocking your system, please return all overclocked components to their stock speeds. If the BSOD's are found not to be caused by the overclock, you can re-overclock the components once we have finished the diagnostics.

BSOD ANALYSIS

SSD Updates

You have an SSD installed. SSD's that are not updated are known to cause or contribute to BSOD's. Please make sure the following are up to date:
SSD firmware
BIOS Version
Chipset Drivers
Hard disk controller drivers/SATA drivers
Marvell IDE ATA/ATAPI controllers (older drivers for these are especially problematic)
Other Hardware

The BSOD dumps you gave me do not give a definitive cause for your BSOD's.

As a result I recommend you check your hardware for issues. Please run Memtest86+ to check your RAM. Let it run for 6-8 passes overnight as described in the tutorial. Pay particular attention to parts 2 and 3.

Also check your HDD for errors using Seatools and chkdsk.. Download and create a bootable version of the Seatools for DOS program as described here. For check disk, follow this tutorial: Disk Check
Work through each of these steps and report back after you've completed each one. If you have any questions, feel free to ask
Stephen

http://www.sevenforums.com/bsod-help-support/239430-ivy-bridge-bsod-when-resuming-sleep.html
Relevancy 76.54%

As above - I just recently did a FRESH installation on a new SSD crucial M of windows x previously i have never had this issue before but currently whenever I set it to sleep and resume later doesn t matter 7 SLEEP. from after x64] [win BSOD everytime resuming how long it has been in sleep mode it shows the desktop for seconds before it BSOD all windows updates and drivers have been installed I have attached the relevant minidump files for everyone s analysis here http www mediafire com olzuusibsuif hope i could find some help here thanks -- Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode b BCP C BCP FFFFF F C BCP FFFFF BCP OS Version Service Pack Product Files that help describe the problem C Windows Minidump - - dmp C Users Sabrina AppData Local Temp WER- - sysdata xml Read our privacy statement online http go microsoft com fwlink linkid amp clcid x If the online privacy statement is not available please read our privacy statement offline C Windows system en-US erofflps txt -- BSOD everytime after resuming from SLEEP. [win 7 x64]

A:BSOD everytime after resuming from SLEEP. [win 7 x64]

Considering what you've posted, let's get some more information about your errors.Please follow this procedure: Jcgriff2's BSOD Posting Instructions

Important! Running BSOD_Windows7_Vista_v2.64_jcgriff2_.exe will automatically run autoruns.exe. Make sure they both are in the same location.Do not attach the .zip file to your next post as directed in Step 4. It will be too large and will fail. Upload the file to Mediafire (or another file-sharing site) and copy/paste the weblink in your next post.Use Speccy to provide details of your computer's configuration.

Download, install, and run.After Speccy has finished gathering information, click File > Publish Snapshot.Click Yes. A web address will be displayed. Click Copy to Clipboard and paste it in your next post. Include your computer's manufacturer and model number, if you haven't already.Please download MiniToolBox and run it.
Checkmark following boxes:
List Installed ProgramsClick Go.
When the scan is finished, a text file will open in a Notepad window.Copy the entire contents of the Notepad window, and paste in your reply.
Result.txt will be saved in the same directory the tool is run.

http://www.bleepingcomputer.com/forums/t/453441/bsod-everytime-after-resuming-from-sleep-win-7-x64/
Relevancy 76.54%

Hi,

In the last 10 days I got several BSOD REFERENCE_BY_POINTER. It does not always happen but I couldn't find any patterns so far except that every time it occurred, the machine was resuming from sleep.

I tried to read & analyze the minidumps with WinDbg but I'm not very familiar with it and the only thing I figured out is that it blames mountmgr.sys for the mess. I've attached the collected information.

Any advice about how to get rid of it is welcome.
Thanks,

Gem

A:BSOD REFERENCE_BY_POINTER when resuming from sleep

 Clean bootTroubleshoot Application Conflicts by Performing a Clean Startup
Reduce items at start-up. No software except anti-virus is required plus doing this improves the time for logging into windows:How to Change, Add, or Remove Startup Programs in Windows 7

Remove Kaspersky as a test, and replace with MSE.

Microsoft Security Essentials is recommended from a strict BSOD perspective, compatibility & stability compared to other internet security software. Malwarebytes is a great combo to MSE. They are free and lightweight.

Also uninstall your existing Antivirus software before you install MSE.

Good and Free system security combination.



   Warning
Do not start the free trial of Malware Bytes; remember to deselect that option when prompted.




Run the System File Checker that scans the of all protected Windows 7 system files and replaces incorrect corrupted, changed/modified, or damaged versions with the correct versions if possible:Click on the
Type CMD on Search
Left click and Run as Administrator
Type SFC /scannow
Full tutorial here:SFC /SCANNOW Command - System File Checker
Run Disk Check on your Hard Drive for file system errors and bad sectors on it.

 Hard Drive Diagnostics
Double click and open my computer.
Right click on desired drive and hit properties.
Click on tools tab and Check now.

Read complete instructions on the tutorial: Disk Check

Other Tests:

 




Upload a screenshot of your hard disk using Crystal Disk Info.
Make a hard drive test from the hard drive manufacturers website.
Test your Hard Drive with SeaTools.





Temp Monitoring

Check for heating issues using Speccy or HWMonitor.

Speccy - System Information - Free Download
HWMonitor CPUID - System & hardware benchmark, monitoring, reporting

Upload a screen shot with either of the tools: Screenshots and Files - Upload and Post in Seven Forums

http://www.sevenforums.com/bsod-help-support/365164-bsod-reference_by_pointer-when-resuming-sleep.html
Relevancy 76.54%

Please somebody help me. I've already updated my video card drivers and th problem persists.

I have Windows 7 Ultimate 32 retail
Last Instalation of OS 1 month
Laptop 2 months


Thank you very much....

A:BSOD after resuming from sleep/hibernate

Hi, msansone; and welcome to the forums. I looked at five dumps and all five blame RTSTOR.SYS for the crash.





Quote:
RTSTOR.SYS Wed Oct 24 22:08:17 2007 - Realtek High-Speed USB Media Card ReaderRealtek


This driver is way out of date. Try to update it from Reltek. If you cannot update the driver, uninstall the card reader; it is obsolete and not compatible with Win 7.

I also find two other obsolete drivers loaded on your system. Older drivers can and do cause BSOD's with Win 7. Update these drivers.





Quote:
sisagpx.sys Wed Jan 24 02:01:26 2007 - SiS NT AGP Filter belongs to SiS (R) NT AGP Filter for Windows XP by Silicon Integrated Systems Corporation. This is an XP driver. Update this driver http://www.sis.com/download/

srvkp.sys Thu Mar 20 07:22:12 2008 - SiS VGA Driver Managerbelongs to the software SiSkp or SiS (R) WindowsXP Display Manager by Silicon Integrated Systems Corporation. http://www.sis.com/download/


Take care of these three drivers, reboot and let's see how your system does.


Code:
Windows 7 Kernel Version 7600 MP (2 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16617.x86fre.win7_gdr.100618-1621
Machine Name:
Kernel base = 0x82811000 PsLoadedModuleList = 0x82959810
Debug session time: Wed Nov 3 11:38:16.296 2010 (GMT-4)
System Uptime: 0 days 0:54:56.980
Loading Kernel Symbols
...............................................................
................................................................
........................
Loading User Symbols
Loading unloaded module list
.....................
1: kd> !Analyze
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1000007E, {c0000046, 828518f8, b3cdfba4, b3cdf8d4}

*** WARNING: Unable to verify timestamp for RTSTOR.SYS
*** ERROR: Module load completed but symbols could not be loaded for RTSTOR.SYS
Probably caused by : RTSTOR.SYS ( RTSTOR+5be8 )

Followup: MachineOwner
---------

1: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e)
This is a very common bugcheck. Usually the exception address pinpoints
the driver/function that caused the problem. Always note this address
as well as the link date of the driver/image that contains this address.
Some common problems are exception code 0x80000003. This means a hard
coded breakpoint or assertion was hit, but this system was booted
/NODEBUG. This is not supposed to happen as developers should never have
hardcoded breakpoints in retail code, but ...
If this happens, make sure a debugger gets connected, and the
system is booted /DEBUG. This will let us see why this breakpoint is
happening.
Arguments:
Arg1: c0000046, The exception code that was not handled
Arg2: 828518f8, The address that the exception occurred at
Arg3: b3cdfba4, Exception Record Address
Arg4: b3cdf8d4, Context Record Address

Debugging Details:
------------------
EXCEPTION_CODE: (NTSTATUS) 0xc0000046 - An attempt to release a mutant object was made by a thread that was not the owner of the mutant object.

FAULTING_IP:
nt!KeReleaseMutant+215
828518f8 cc int 3

EXCEPTION_RECORD: b3cdfba4... Read more

http://www.sevenforums.com/bsod-help-support/123015-bsod-after-resuming-sleep-hibernate.html
Relevancy 76.54%

Just upgraded to windows 10 on a 2011 Dell XPS l502x.

? OS - Windows 10 x64
? What was the original installed OS on the system? Windows 7
? Windows 7 came pre-installed
? Approximate age of system (hardware) - 4 years
? Approximate age of OS installation (if you know) 3 days for win 10
? Have you re-installed the OS? no

? CPU - 2 gen i7
? Video Card NVIDA 525
? System Manufacturer DELL - XPS l502x

http://www.techsupportforum.com/forums/f299/windows-10-bsod-on-resuming-from-sleep-1027218.html
Relevancy 76.54%

So this is the first time I've ever had a BSOD whilst running on stock clock speeds. I just resumed the PC from sleep when it happened. I've uploaded the file as instructed. Hoping some folks can assist.

Additional info - I took out my RAM modules a couple of days ago to test another module, which ended up working fine. When I plugged both modules in the first time, I got a no POST. After some retries of plugging them back in, it eventually POSTed.

http://www.sevenforums.com/bsod-help-support/389322-first-time-ive-had-bsod-after-resuming-sleep.html
Relevancy 76.54%

Hello Everyone,

I wish someone could help me with this, I bought my laptop a couple of months ago. I keep getting BSOD every time I resume from sleep mode. Thanks in advance.

A:BSOD while resuming from sleep mode.

SSD's were temperamental when they first came out, but their reliability has improved greatly over the last year or two. There are 2 things that MUST be checked on systems with BSOD's and SSD's:




1) That the SSD firmware is the latest available for the SSD
2) That the storage controller drivers on the motherboard are the most recent. They must date from late 2012 or later. This is ALL controllers, not just the one that the SSD is attached to.



Out of 7 memory dumps there were 3 different BSOD error codes. The differing error codes are usually symptomatic of a lower level problem within the system. They are usually caused by one of these things:
- borked (broken) hardware (several different procedures used to isolate the problem device)
- BIOS issues (check for updates at the motherboard manufacturer's website)
- overclocking - You'll know if you're overclocking or not. If uncertain we can suggest things to check.
- compatibility issues (3rd party hardware/drivers)
- low-level driver problems
- or even malware (scanned for when we ask for hardware diagnostics from Initial Hardware Diagnostics or Hardware Diagnostics ).

You can get a head start on the hardware diagnostics if you'd like - they are located here: Hardware Diagnostics

The WER section of MSINFO32 shows a lot of Live Kernel Events. These are errors that says Windows doesn't know why it shut down. Most often these are hardware problems, with overheating being the most common. Have you monitored the temps of your system? You have HWMonitor installed, please monitor the temps of the system - particularly the graphics card (as that's a known problem area in the G7x series of laptops). Try running the video stress tests that are listed at this link: Hardware Diagnostics

Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable! :

ASMMAP64.sys Thu Jul 2 05:13:26 2009 (4A4C7A36)
LENOVO ATK Hotkey ATK0101 ACPI UTILITY
http://www.carrona.org/drivers/driver.php?id=ASMMAP64.sys

LGBusEnum.sys Mon Nov 23 20:36:48 2009 (4B0B38B0)
Logitech Keyboard
http://www.carrona.org/drivers/driver.php?id=LGBusEnum.sys

DrvAgent64.SYS Mon Dec 14 05:23:26 2009 (4B26121E)
FLEXnet Licensing Service 64 - Acresso Software Inc.
http://www.carrona.org/drivers/driver.php?id=DrvAgent64.SYS

ssadwh.sys Thu May 12 09:06:44 2011 (4DCBDB64)
SAMSUNG Android USB Modem
http://www.carrona.org/drivers/driver.php?id=ssadwh.sys

ssadcm.sys Thu May 12 09:09:45 2011 (4DCBDC19)
SAMSUNG Android USB Modem
http://www.carrona.org/drivers/driver.php?id=ssadcm.sys

atkwmiacpi64.sys Tue Sep 6 21:44:52 2011 (4E66CC94)
ATK WMIACPI Utility
http://www.carrona.org/drivers/driver.php?id=atkwmiacpi64.sys

AiCharger.sys Thu Sep 22 22:04:40 2011 (4E7BE938)
Asus Charger Driver [br] Likely BSOD cause - haven't seen recently (15Jan2013)
http://www.carrona.org/drivers/driver.php?id=AiCharger.sys

If all of this doesn't stop the BSOD's, please run Driver Verifier according to these instructions: Driver Verifier Settings

Analysis:
The following is for informational purposes only.

Code:
**************************Sat Jun 22 04:08:00.638 2013 (UTC - 4:00)**************************
Loading Dump File [C:\Users\Owner\SysnativeBSODApps\062213-12687-01.dmp]
Windows 8 Kernel Version 9200 MP (8 procs) Free x64
Built by: 9200.16581.amd64fre.win8_gdr.130410-1505
System Uptime:0 days 7:47:47.369
Probably caused by :ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+27177 )
BugCheck 1A, {5003, fffff70001080000, 8e3, 8e500ec11c6}
BugCheck Info: MEMORY_MANAGEMENT (1a)
Arguments:
Arg1: 0000000000005003, The subtype of the bugcheck.
Arg2: fffff70001080000
Arg3: 00000000000008e3
Arg... Read more

http://www.eightforums.com/bsod-crashes-debugging/27004-bsod-while-resuming-sleep-mode.html
Relevancy 76.54%

Hi all,

For the past month or so, I have been getting "Windows recovered from an unexpected shutdown" when turning my laptop back on from hibernate/sleep. Using BluescreenView I get the DRIVER_POWER_STATE_FAILURE error caused by ntoskrnl.exe. From my Googling, it seems that ntoskrnl.exe is just a catch-all for another driver misbehaving, and I can't find out which one it is.

I have updated my onboard graphics, graphics card, chipset, Wifi/ethernet, BIOS, and mousepad drivers with the most updated I could fine, but this problem is still happening. After I updated my onboard graphics + graphics card, the problem seemed to go away for a week, but now it's back. The only difference being the Caused By Address in Bluescreen view says "ntoskrnl.exe+770aa" now versus "ntoskrnl.exe+78a8a" before.

Thanks for your help.

A:BSOD after resuming from hibernate/sleep

The driver to the Qualcomm Atheros AR5B97 Wireless Network Adapter has failed to complete a power IRP within a specific time; and apparently that is causing the BSODs.

Code:
fffff880`0319e9b8 fffff880`0514cc54Unable to load image \SystemRoot\system32\DRIVERS\ts_athwx.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ts_athwx.sys
*** ERROR: Module load completed but symbols could not be loaded for ts_athwx.sys
ts_athwx+0x100c54
the driver is the latest.

Code:
Image name: athrx.sys
Timestamp: Fri Mar 06 09:02:23 2015 (54F91FC7)
So there is no adequate reason for it other than a conflict with the driver to ar5416 chip, Atheros AR5008 Wireless Network Adapter Service 7.7 (c:\windows\system32\drivers\ts_athwx.sys).

I think you dont you the Atheros AR5008 now, so uninstall the driver for it, and see how the computer runs.

http://www.sevenforums.com/bsod-help-support/374668-bsod-after-resuming-hibernate-sleep.html
Relevancy 76.54%

Hello, I have just tried to install upgraded RAM on my computer and have found that I consistently get BSOD on resume from standby (sleep) mode. I have run the WinDbg software to find that the problem has to do with a certain driver but due to my inexperience, I cannot understand the debug log. If someone could please assist me that would be great.

A:BSOD when resuming from sleep after upgrading from 2 GB to 4 GB RAM

McAfee
We have seen McAfee cause BSOD's on several systems and recommend uninstalling it with the McAfee Removal Tool and replace with Microsoft Security Essentials. How to uninstall McAfee products using the consumer Removal Tool (MCPR)

Uninstallers (removal tools) for common antivirus software. Microsoft Security Essentials and Malwarebytes are recommended from a strict BSOD perspective. They do not cause blue screens on the system as other AV products do.

Microsoft Security Essentials, Free antivirus for windows and Malwarebytes Anti-Malware Free



   Information
Do not start the free trial of MalwareBytes, unselect that option when prompted.
Update and make full scans with both separately.

Start up

Keep less stuff at the start-up. Only anti-virus, this helps avoid driver conflicts and improves time to log in to windows.
Troubleshoot a Problem by Performing a Clean Startup in Windows 7 or Vista
How to Change, Add, or Remove Startup Programs in Windows 7

Disk Check

For errors on your Hard drive(s): How to Run Disk Check in Windows 7

This tutorial USB Selective Suspend - Turn On or Off may help you:

To Disable Selective Suspend:

Code:
1. open the control panel
2. go to power options (you may have to set view to small icons)
3. click change plan settings
4. in the window that opens:
5. click change plan settings
6. click change advanced power settings, expand usb and ensure usb selective suspend is disabled.
Memtest86+

Run Memtest86+ for at least 8-10 passes. It may take up to 20 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold. How to Test and Diagnose RAM Issues with Memtest86+



   Note
Pay close attention to part 3 of the tutorial in order to rule the faulty RAM stick out.



   Tip
Do this test overnight.

http://www.sevenforums.com/bsod-help-support/292460-bsod-when-resuming-sleep-after-upgrading-2-gb-4-gb-ram.html
Relevancy 76.54%

My Win8 machine crashes when resuming from sleep. This used to happen only intermittently, and I assumed it was just a feature of Win8 and I put up with it for a while. But now it happens every single time the laptop goes to sleep, and I'm losing lots of unsaved info and it's quite aggravating.

Here is the .zip file created after I ran SF Diagnostic Tool. (attached)

Thanks a lot

A:Crash when resuming from Sleep. Sometimes there is a BSOD.

...and I assumed it was just a feature of Windows 8



Bwah hah hah!!!

Only 102 Windows Updates installed. Most systems have 150 or more. Please visit Windows Update and get ALL available updates (it may take several trips to get them all). Do this (and test for further BSOD's) before trying any hotfixes that may be described below.

SSD's were temperamental when they first came out, but their reliability has improved greatly over the last year or two. There are 2 things that MUST be checked on systems with BSOD's and SSD's:




1) That the SSD firmware is the latest available for the SSD. I usually can't see this info in the reports, so I rely on you to check it.
2) That the storage controller drivers on the motherboard are the most recent. They must date from late 2012 or later. This is ALL controllers, not just the one that the SSD is attached to. If involved these should be visible in the memory dump - but it doesn't hurt to check manually.



These devices have problems in Device Manager. Please uninstall them (right click on them and select "Uninstall") then reboot and check to see if the errors are resolved.





USB-IF xHCI USB Host Controller ROOT\UOIP_BUS_DRIVER\0000 This device is not working properly because Windows cannot load the drivers required for this device.

WAN Miniport (Network Monitor) #2 ROOT\MS_NDISWANBH\0001 This device is not working properly because Windows cannot load the drivers required for this device.

WAN Miniport (Network Monitor) #3 ROOT\MS_NDISWANBH\0002 This device is not working properly because Windows cannot load the drivers required for this device.



The STOP 0x7A error (these are the errors that you're having) can be hardware or software. We'll first work on the software stuff, but you can get a head start on the hardware by running these free diagnostics: Hardware Diagnostics

You can see the "Usual Causes" at this link: BSOD Index - STOP 0x7A
Also, while at that link, check the articles to see if any may apply to you (it could be that there is an unreleased hotfix that you may need). In particular, I'm concerned about this one: 0x0000007a Stop error when you resume a Windows 8-based computer from Hibernate mode

Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable! :

dc3d.sys Wed May 18 04:07:24 2011 (4DD37E3C)
Filter Driver for Identification of Microsoft Hardware Wireless Mouse and Keyboard Device Models - Microsoft IntelliType Pro / IntelliPoint
http://www.carrona.org/drivers/driver.php?id=dc3d.sys

smihlp.sys Mon May 30 12:21:37 2011 (4DE3C411)
SMI helper driver - Likely part of the UPEK Protector Suite
http://www.carrona.org/drivers/driver.php?id=smihlp.sys

Analysis:
The following is for informational purposes only.

Code:
**************************Tue Nov 12 12:35:56.078 2013 (UTC - 5:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\111213-15250-01.dmp]
Windows 8 Kernel Version 9200 MP (4 procs) Free x64
Built by: 9200.16628.amd64fre.win8_gdr.130531-1504
System Uptime:1 days 2:37:54.736
Probably caused by :ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+24cc6 )
BugCheck 7A, {4, 0, fffffa8012c66e80, fffff8801ab4f000}
BugCheck Info: KERNEL_DATA_INPAGE_ERROR (7a)
Arguments:
Arg1: 0000000000000004, lock type that was held (value 1,2,3, or PTE address)
Arg2: 0000000000000000, error status (normally i/o status code)
Arg3: fffffa8012c66e80, current process (virtual address for lock type 3, or PTE)
Arg4: fffff8801ab4f000, virtual address that could not be in-paged (or PTE contents if arg1 is a PTE address)
BUGCHECK_STR: 0x7a_0
PROCESS_NAME: System
FAILURE_BUCKET_ID: 0x7a... Read more

http://www.eightforums.com/bsod-crashes-debugging/35381-crash-when-resuming-sleep-sometimes-there-bsod.html
Relevancy 76.54%

The zip file with the dump files I obtained according to the sticky is attached.
It only BSOD when resuming from sleep mode. I turn it back on and it is a black screen (My monitor's light is brown, as if nothing is plugged in, but it doesn't say no input device). There is no mouse or anything, just a black screen for 10 min. Then it BSOD, restarts, and windows loads. Please help, thank you.
Is Windows 7 . . .
- x64
- the original installed OS on the system? yes
- an OEM or full retail version? full retail
- What is the age of system (hardware)? 1 month
- What is the age of OS installation (have you re-installed the OS?) 5 days

A:BSOD When Resuming From Sleep Mode. Please Help

BSODs caused by PxHlpa64.sys, a driver from sonic solutions, remove/update this driver


Code:
BugCheck C9, {228, fffff88001051f74, fffff980219d2d30, 0}

Unable to load image \SystemRoot\system32\DRIVERS\amdxata.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for amdxata.sys
*** ERROR: Module load completed but symbols could not be loaded for amdxata.sys
Unable to load image \SystemRoot\System32\Drivers\PxHlpa64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for PxHlpa64.sys
*** ERROR: Module load completed but symbols could not be loaded for PxHlpa64.sys
Probably caused by : PxHlpa64.sys ( PxHlpa64+2f74 )
Update ASUS monitoring system tools, they use an outdated driver

Code:
ATKDispLowFilter.sys fffff880`04590000 fffff880`04599a00 0x00009a00 0x482a5671 14/05/2008 07:03:13

http://www.sevenforums.com/bsod-help-support/142123-bsod-when-resuming-sleep-mode-please-help.html
Relevancy 76.54%

Hello everyone I came Bad_pool_caller sleep. resuming when BSOD from across this forum while searching for a solution to my BSOD problem Usually I can BSOD when resuming from sleep. Bad_pool_caller fix things myself BSOD when resuming from sleep. Bad_pool_caller but this has me stumped Your help is much appreciated I don't know how much of this is relevant but I will include everything that has happened leading up to my problem I got a new monitor Dell wfp and hooked it up to via VGA cable I ordered a usb cable for it and a DVI cable and then I went out of town for two weeks and completely unplugged all electronics including my computer When I got back I installed the new cables plugged everything back in and the computer wouldn't start The light on the PSU was flashing I re-seated the PSU and then it came on just fine Now every time my computer tries to resume from sleep I get a BSOD with the error quot Bad Pool Caller quot I have included the files requested in the instructions Again thanks for any help you may be able to give me My specs are listed on my profile

A:BSOD when resuming from sleep. Bad_pool_caller

Related to hssdrv.sys Hotspot Shield Routing Driver from AnchorFree Inc. yours is 2 years old. Reinstall newest available or remove.

http://www.sevenforums.com/bsod-help-support/232276-bsod-when-resuming-sleep-bad_pool_caller.html
Relevancy 76.11%

Last night I was using my laptop to get some last minute work done As I opened a new document the power randomly went out and came back on one minute later After that I finished up what I was doing and went to bed About hours later Laptop sleep screen mode. when from black resuming I woke up and heard a Laptop black screen when resuming from sleep mode. ringing sound but I just thought my ears were ringing As I got dressed the ringing persisted As I needed to do something on the laptop I flipped the screen open Not only was the charger on its an igo green adapter it usually shuts off when the laptop is off the wifi light and hard drive light were solid When I pressed a key on the keyboard nothing happened Not even using the trackpad would wake the thing up Then I noticed that it was the laptop making the ringing As nothing would work I pressed and held the power button Laptop black screen when resuming from sleep mode. until it turned off It Laptop black screen when resuming from sleep mode. started up and I am using it to type this When I put it to sleep again will the same thing happen And what caused it nbsp

https://forums.techguy.org/threads/laptop-black-screen-when-resuming-from-sleep-mode.1089300/
Relevancy 76.11%

Hi all,
Windows 8 having trouble again on my machine but it's probably somehow my fault .
Rarely (about every 2days) The machine crashes when resuming from sleep (e.g. Opening the lid of the laptop).
Usually this doesn't even show an image on screen, it stays black and I have to reset it. However upon checking it seems to have made a few minidumps so I'll be attaching them here.
As far as I know all my drivers are up to date and I'm running no AV except for Defender + MBAM on demand and the stock Windows Firewall.

~Aeny

A:Mysterious rare BSoD when resuming from sleep.

VirtualBox is the culprit:

FAILURE_BUCKET_ID: X64_0x9F_3_IMAGE_VBoxUSB.sys

Recommend to update the software or uninstall. Enjoy.

http://www.eightforums.com/bsod-crashes-debugging/6208-mysterious-rare-bsod-when-resuming-sleep.html
Relevancy 76.11%

Hello everybody,
I have freshly installed Windows 10 Home 64 on Samsung 850 EVO 500 Gb SSD. From the install time I getting regular BSOD's, but only in one typical scenario: after 4th or 5th time when pc resumed from sleep, other ways the pc runs perfectly.
Getting desperate with this problem. I update any possible drivers with update reviver program, but pc behavior is still the same. It goes to sleep without problem and usually crashes only after 4th to 5th time when resuming. The motherboard bios is latest official version (not beta). Windows updates are on.
Any help will be appreciated.

http://www.tenforums.com/bsod-crashes-debugging/63343-bsod-regular-basis-when-resuming-sleep.html
Relevancy 76.11%

Hi, wasn't sure if I should start a new thread.

I am getting a BSOD when resuming my computer after sleep. It has only happened twice so far, and both times after attempting to wake the computer up. This is a brand new computer (only 1 month old) and this issue appeared this morning. The only changes I made yesterday were to uninstall Avast antivirus and install Microsoft Security Essentials. This is after having problems with Skype and reading that Avast may have been the problem.

I suspect it is a driver of some sort however I don't have the knowledge to go through the logs. I have done memtest86 with no errors. Please find attached the results of my SF Diagnostic Tool scan. Thank you for your help in advance!

A:BSOD when resuming from sleep, error 0x00A

I hate to bump my own thread but I'd hate to see it get lost before I get some kind of response. Thanks!

http://www.sevenforums.com/bsod-help-support/242539-bsod-when-resuming-sleep-error-0x00a.html
Relevancy 76.11%

Hi,

My dad had a BSOD this morning after resuming from sleep mode.
He said the only thing active was Microsoft Outlook when the PC entered sleep mode.
I did what you guys ask me to do before making a new thread here so I attached the log from the DM Log Collector.
I hope someone from Sevenforums could help me out with this error. I would really appreciate it.

Cheers,
Tom

A:BSOD after resuming from sleep, error 0x000000d1

The BSOD is blaming AMD High Definition Audio.

Code:
BugCheck D1, {fffff88006a741ec, 2, 8, fffff88006a741ec}

Probably caused by : AtihdW76.sys ( AtihdW76+31ec )

Followup: MachineOwner
---------
It is not a very uncommon issue, we have seen it a few times earlier too.

I would suggest you to uninstall it from device manager. As the Realtek High Definition Audio is present there, uninstalling AMD audio should not be a problem IMHO.

Let us know the result.

http://www.sevenforums.com/bsod-help-support/369747-bsod-after-resuming-sleep-error-0x000000d1.html
Relevancy 76.11%

Hello Ever since I upgraded to W Pro from W Pro my PC has started bluescreening when resuming from Sleep MEMORY MANAGEMENT is the most common one and the only one that has occured so far after upgrade to when BSOD from MEMORY_MANAGEMENT mode Sleep resuming Build upgraded - - BSODs KMODE EXCEPTION NOT BSOD MEMORY_MANAGEMENT when resuming from Sleep mode HANDLED NTFS sys SYSTEM SERVICE EXCEPTION KERNEL SECURITY CHECK FAILURE occured before upgrade to Build and might happen again Minidumps for these disappeared during upgrade to latest W build BIOS is the latest one Ran Memtest yesterday passes with all tests no errors found Windows Memory Diagnostics didn t find anything either Please help warranty on all hardware will run out in a month and need to find out if any HW needs to be changed Greetings from Gothenburg Sweden kd gt analyze -v Bugcheck Analysis MEMORY MANAGEMENT a Any other values for parameter must be individually examined Arguments Arg The subtype of the bugcheck Arg fffff e Arg c eda c Arg ffffe d Debugging Details ------------------ DUMP FILE ATTRIBUTES xc Insufficient Dumpfile Size Kernel Generated Triage Dump BUGCHECK STR x a CUSTOMER CRASH COUNT DEFAULT BUCKET ID WIN DRIVER FAULT PROCESS NAME OneDrive exe CURRENT IRQL ANALYSIS VERSION debuggers dbg - amd fre LAST CONTROL TRANSFER from fffff b fd to fffff b STACK TEXT ffffd da fffff b fd a fffff e c eda c nt KeBugCheckEx ffffd daa fffff b ae fffff e c c eda c nt FNODOBFM string' x fd ffffd daf fffff b ab ffffe ffffe ea c ffffe e b nt MiQueryAddressState x ffffd db fffff b e e c nt MiQueryAddressSpan x ffffd dc fffff b e c nt MmQueryVirtualMemory x e ffffd dd fffff b ca fffff fb da fffff fb db fffff b ffff b e nt NtQueryVirtualMemory x ffffd ddd ffe acf b nt KiSystemServiceCopyEnd x ad x ffe acf b STACK COMMAND kb FOLLOWUP IP nt FNODOBFM string' fd fffff b fd cc int SYMBOL STACK INDEX SYMBOL NAME nt FNODOBFM string' fd FOLLOWUP NAME MachineOwner MODULE NAME nt IMAGE NAME ntkrnlmp exe DEBUG FLR IMAGE TIMESTAMP b IMAGE VERSION BUCKET ID FUNC OFFSET fd FAILURE BUCKET ID x a nt FNODOBFM string BUCKET ID x a nt FNODOBFM string ANALYSIS SOURCE KM FAILURE ID HASH STRING km x a nt fnodobfm string FAILURE ID HASH c - - a -bf f- b dc c b Followup MachineOwner ---------

A:BSOD MEMORY_MANAGEMENT when resuming from Sleep mode

Have you read BSOD Posting Instructions?

http://www.tenforums.com/bsod-crashes-debugging/29859-bsod-memory_management-when-resuming-sleep-mode.html
Relevancy 76.11%

? original installed OS on system: windows professional 64 bit;
? full retail version;
? Age of system: almost 2 months;
? Age of OS installation: it is a migration from an old installation;
? CPU: Intel Core i7-2670QM;
? Video Card: NVIDIA Quadro 1000M;
? MotherBoard: Hewlett-Packard 1631;
? Power Supply - Chinon 150W;

? Hewlett Packard;
? elitebook 8560w.

Hello, the BSOD occurred while resuming from sleep my laptop. That was my first BSOD with my new laptop.

Thank you.

A:BSOD When resuming from sleep; error 0x0000003b

Unfortunately no DMP's included.
Please try this way...

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

If you are overclocking STOP

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

Please follow the posting instruction at this link

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:

* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the contents of that folder
Please upload them to skydrive or a file sharing service and put a link to them in your next post.
To ensure minidumps are enabled:

* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.
BSODs but no Dump Files?

http://www.techsupportforum.com/foru...ta-452654.html

http://www.techsupportforum.com/forums/f299/bsod-when-resuming-from-sleep-error-0x0000003b-653866.html
Relevancy 75.25%

When I put my machine to sleep either allowing the power options to do it for me or selecting sleep from the shutdown mennu or from media center so how running BSOD resuming center sleep from media when if makes no difference it fails to restart amp I get a BSOD with kernel data inpage error with the first code A and the second code of I'm on my nd install of Windows Pro legit copy on my machine - I broke the last install but I quot know quot BSOD when resuming from sleep if media center running my hardware is working I have run memtest and got no memory errors I've run chkdsk and found no problems I have recreated my paging file set to no paging file reboot set to a value reboot amp that makes no odds In all of my tests the machine resumes from sleep perfectly unless media centre is running - in fact I've been looking through the event viewer and it is clear that sleep has been used a lot of times - I've taken a clean install of W added Paragon Drive Backup and my Netgear Wireless adapter software and that's it - the problem only manifested yesterday typical everything except media centre configured amp ready to roll and then I hit problems when I first configured media center My machine is fully up to date according to windows update I've skipped a NIC update offered because I know it causes problems with my NIC not that I've got a cable plugged into it There is a later graphics driver available from ATI but my last install ran into problems when I added more software so I was hoping to avoid that I have also tried without a paging file and that doesn't make any difference so I would conclude it isn't disk related either Event viewer shows no errors just before failure it is only the resume that is a problem - I've reconfigured to exclude all of my media files so I have an empty config having previously run mcupdate -MediaCenterRecoveryTask to reset as best as I could find To be honest I'm now at a loss as to where to go next - reinstall is looming but I would rather avoid that so suggestions would be greatly appreciated I've attached the dmp amp xml file that was created if anyone knows how to interpret amp can give me a hand Thanks

A:BSOD when resuming from sleep if media center running

Hi. I didn't even look at the crash dump(s) yet.

Install the latest chipset drivers and bios from here. If you have further crashes, please post a new crash dump. Good luck.

(And run the latest video driver. Latest is always best.)

Edit - Alright I looked at it. "Typically caused by
a bad block in the paging file or disk controller error."

My advice is good.

You can run chkdsk /r C: from an elevated command prompt for each partition on the system. Change C to match the partition(s) for each run.

http://www.sevenforums.com/bsod-help-support/41006-bsod-when-resuming-sleep-if-media-center-running.html
Relevancy 75.25%

Hey there I recently upgraded my notebook hard occurs resuming When from mode, restart Sleep BSOD and drive from a Western Digital WD BEVT GB to a SAMSUNG Spinpoint M E HM JI GB hard drive and quot cloned quot from the old When resuming from Sleep mode, BSOD and restart occurs to the new The only problem since the switch is when I resume from sleep When resuming from Sleep mode, BSOD and restart occurs mode My laptop goes into sleep mode fine but upon resuming it correctly shows the log-in screen there is a password on my account for a few seconds then proceeds to flash a BSOD for a split-second before restarting and showing the error recovery unexpected shutdown screen I have looked in my minidump file folder but no recent dumps show up so I am not attaching the file The event logger shows many errors including Kernal-Power event ID I have tried playing with the sleep When resuming from Sleep mode, BSOD and restart occurs settings hybrid sleep etc in the Advanced Power Settings with no luck Drivers are all up-to-date I assume it is a problem with the new Samsung hard drive With my old drive the moment I woke the computer from sleep I would be able to log-in and resume where I left off almost instantly I attached the Event Viewer log in a zip file Windows Ultimate x Retail Hardware approx years old Samsung HDD is new Last OS installation approx - months ago Old HDD was quot cloned quot to the new GB HDD System Health Report passed with no errors Gateway T- Laptop Intel GM chipset Intel Core Duo T GHz GB Memory Intel Graphics Media Accelerator X Thanks Shane

A:When resuming from Sleep mode, BSOD and restart occurs

make sure you have set your system to create minidump:





Quote:
Windows 7:
Go to Start and type in "sysdm.cpl" (without the quotes) and press Enter
Click on the Advanced tab
Click on the Startup and Recovery Settings button
Ensure that "Automatically restart" is unchecked
Under the Write Debugging Information header select "Small memory dump (64 kB)" in the dropdown box
Ensure that the Small Dump Directory is listed as "%systemroot%\Minidump" (without the quotes)
Click OK twice to exit the dialogs, then reboot for the changes to take effect.



If you are using any program such as CCleaner, they may clean out your minidump folder, please double check that

http://www.sevenforums.com/bsod-help-support/102755-when-resuming-sleep-mode-bsod-restart-occurs.html
Relevancy 75.25%

I have formatted and re-installed windows, updated my BIOS, checked all of my drivers, disabled Hibernation
Opened up the case, checked the cables, cleaned out the machine. all to no avail

I have included a dump file,
(let me know if I didn't do it right)

I am willing to do anything at this point
just don't know what to do

A:BSOD when resuming from Sleep WIN 7 Home ASUS P5n73AM MB

Welcome to SF Sean .

A single dump file is usually not enough and I would like to have more to get a better "feel" of the system.
I see you have CCleaner installed, please STOP using it along the troubleshooting procedure
as it deletes the dumps files which we need.


Code:
BugCheck F4, {3, 86948b68, 86948cd4, 82c29eb0}

----- ETW minidump data unavailable-----
Probably caused by : csrss.exe

EXCEPTION_CODE: (NTSTATUS) 0xc0000006 - The instruction at 0x%p referenced memory at 0x%p. The required data was not placed into memory because of an I/O error status of 0x%x.

BUGCHECK_STR: 0xF4_IOERR
Please start by testing the HDD.


   Warning
The Following Method Should NOT Be Performed On An SSD!
Testing the HDD:
Perform a Disk Check | Disk Check- Scroll down to OPTION TWO of the tutorial and use the /R switch in the CHKDSK command | chkdsk C: /R.
Then Post the Disk Check results following | This Tutorial.
Once back in Windows, download Crystal Disk Info and post a screenshot (multiple shots if you have more than one drive).
Download SeaTools for DOS if you don't want to use a CD to test the HDD you can use YUMI ? Multiboot USB Creator to create a bootable USB (instructions are found at the bottom of both pages).
If SeaTools for DOS is unable to recognize your HDD:
Visit HDDdiag and follow the instructions | Or follow the instructions below.
If SeaTools For DOS does not recognize the drive;
Boot into the BIOS using the *Fx key.
Look for an entry called SATA Mode (or something similar), it should be set to IDE / AHCI.
It's probably set to AHCI which is why SeaTools doesn't recognize them in the DOS environment.
Set it to IDE then save and exit usually by pressing the F10 key.
Now boot into SeaTools and it should detect the drives.
Start the Long Test and let it run.
Upon completion don't try to boot into Windows as it will only result in a BSOD, go back into the BIOS
and change the SATA setting back to what it was in the first place.

*Popular BIOS access keys.







  
Quote: Originally Posted by Arc


Re-seat the sata and power.




Let us know the results.

http://www.sevenforums.com/bsod-help-support/316392-bsod-when-resuming-sleep-win-7-home-asus-p5n73am-mb.html
Relevancy 75.25%

Hi,

I have a Dell XPS 15z (L511z). I've noticed recently that when opening my laptop while its in sleep mode, the computer sounds like its coming to life, but the screen doesn't turn on. After a while, the BSOD shows up and restarts the computer.

Also, I always get the Waiting For Programs To Close message when shutting down, but there are no programs in the list. I usually just let it do its thing and it eventually shuts down.

Please find attached the dumps obtained via SF_Diagnostic_Tool.

Thanks in advance for your help.

A:BSOD after resuming from sleep/hibernate, and delayed shutdowns (9f)

Hi ZosoCoder,

Analysis of the crash dump reports the following information:


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa800d1bd580, fffff80004d8b3d8, fffffa8007534a60}

Probably caused by : vwifibus.sys

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

DRIVER_POWER_STATE_FAILURE (9f)
A driver is causing an inconsistent power state.
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: fffffa800d1bd580, Physical Device Object of the stack
Arg3: fffff80004d8b3d8, Functional Device Object of the stack
Arg4: fffffa8007534a60, The blocked IRP

Debugging Details:
------------------
DRVPOWERSTATE_SUBCODE: 3

IMAGE_NAME: vwifibus.sys

DEBUG_FLR_IMAGE_TIMESTAMP: 4a5bcc39

MODULE_NAME: vwifibus

FAULTING_MODULE: fffff88006f69000 vwifibus

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

BUGCHECK_STR: 0x9F

PROCESS_NAME: System

CURRENT_IRQL: 2

STACK_TEXT:
fffff800`04d8b388 fffff800`038f78c2 : 00000000`0000009f 00000000`00000003 fffffa80`0d1bd580 fffff800`04d8b3d8 : nt!KeBugCheckEx
fffff800`04d8b390 fffff800`0389284c : fffff800`04d8b4c0 fffff800`04d8b4c0 00000000`00000000 00000000`00000003 : nt! ?? ::FNODOBFM::`string'+0x33af0
fffff800`04d8b430 fffff800`038926e6 : fffff880`07b47780 fffff880`07b47780 00000000`00000000 00000000`00000000 : nt!KiProcessTimerDpcTable+0x6c
fffff800`04d8b4a0 fffff800`038925ce : 0000004e`59c6cbad fffff800`04d8bb18 00000000`0020ea44 fffff800`03a05b08 : nt!KiProcessExpiredTimerList+0xc6
fffff800`04d8baf0 fffff800`038923b7 : 00000014`9bf9c0c4 00000014`0020ea44 00000014`9bf9c071 00000000`00000044 : nt!KiTimerExpiration+0x1be
fffff800`04d8bb90 fffff800`0387f90a : fffff800`03a02e80 fffff800`03a10cc0 00000000`00000001 fffff880`00000000 : nt!KiRetireDpcList+0x277
fffff800`04d8bc40 00000000`00000000 : fffff800`04d8c000 fffff800`04d86000 fffff800`04d8bc00 00000000`00000000 : nt!KiIdleLoop+0x5a
STACK_COMMAND: kb

FOLLOWUP_NAME: MachineOwner

FAILURE_BUCKET_ID: X64_0x9F_3_vwifimp_IMAGE_vwifibus.sys

BUCKET_ID: X64_0x9F_3_vwifimp_IMAGE_vwifibus.sys

Followup: MachineOwner
---------
This crash is caused due to the driver vwifibus.sys
Driver related to: Virtual WiFi Bus Driver
Driver updated with 'Windows updates'


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa800b3214c0, fffff80000b9c3d8, fffffa800d1a3010}

Probably caused by : HDAudBus.sys

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* ... Read more

http://www.sevenforums.com/bsod-help-support/290248-bsod-after-resuming-sleep-hibernate-delayed-shutdowns-9f.html
Relevancy 75.25%

I am running Windows 7 64 bit and during the last week I am getting bsod errors caused from intelppm.sys driver file.

I followed the instructions here (Blue Screen of Death (BSOD) Posting Instructions).

I have attached everything related to the bsod(s) I am getting, if some text strings are in greek please ask me to translate it to english for you.

I read around on other forums that a solution is to reinstall windows, as I cannot reinstall intelppm.sys, I would really like to avoid that.

http://www.sevenforums.com/bsod-help-support/389719-bsod-resuming-after-hybernation-sleep-error-0x1000007e.html
Relevancy 75.25%

Just got a new MSI laptop not long ago, recently starting having a few issues with BSOD's. They only occur, but consistently occur, when coming back from sleep mode, or resuming windows. Boot ups are fine, aside from rebooting after a crash...then it takes a couple of tries.I am not incredibly experienced with issues such as this, but I'll post what I know.

The BSOD's I am experiencing are as follows: MEMORY_MANAGEMENT, BAD_POOL_HEADER, PFN_LIST_CORRUPT, SYSTEM_SERVICE_EXCEPTION.

I've not run anything except Whocrashed to analyze anything, and it's result(albeit probably not accurate) was that no offending 3rd party drivers were found. The system runs completely fine doing heavy gaming, and as long as it never goes to sleep it never has any issues. Any leads at all or help finding leads would be greatly appreciated.

A:BSOD when resuming windows/coming out of sleep mode.

Apologies for the self bump, but I can no longer edit my post due to being after 15 minutes. Here's the upload.

http://www.techsupportforum.com/forums/f299/bsod-when-resuming-windows-coming-out-of-sleep-mode-672846.html
Relevancy 74.39%

I posted this earlier in the Crashes and Debugging section but we think this is a hardware problem Hey HDD occurs and BSOD Upgraded restart resuming When mode, from Sleep - there I recently upgraded my notebook hard drive from a Western Digital WD BEVT GB to a SAMSUNG Spinpoint M E HM JI GB hard drive and quot cloned quot from the old to the new The only problem since the switch is when I resume from sleep mode My laptop goes into sleep mode fine but upon resuming it correctly shows the log-in screen there is a password on my account for a few seconds then proceeds to show a BSOD STOP x F Upon restart I am forced to press the power button the computer shows the error recovery unexpected shutdown screen I have looked in my minidump Upgraded HDD - When resuming from Sleep mode, BSOD and restart occurs file folder but no recent dumps show up so I am not attaching the file The event logger shows many errors including Kernal-Power event ID I have tried playing with the sleep settings hybrid sleep etc in the Advanced Power Settings with no Upgraded HDD - When resuming from Sleep mode, BSOD and restart occurs luck Drivers are all up-to-date With my old drive the moment I woke the computer from sleep I would be able to log-in and resume where I left off almost instantly I attached the Event Upgraded HDD - When resuming from Sleep mode, BSOD and restart occurs Viewer log in a zip file if that would help somehow Windows Ultimate x Retail Hardware and computer approx years old Samsung HDD is new Last OS installation approx - months ago Old HDD was quot cloned quot to the new GB HDD System Health Report passed with no errors Gateway T- Laptop Intel GM chipset Intel Core Duo T GHz GB Memory Intel Graphics Media Accelerator X Thanks Shane

A:Upgraded HDD - When resuming from Sleep mode, BSOD and restart occurs

Any ideas why sleep mode no longer works once I upgraded from a 250GB to a 640GB hard drive?

Thanks

http://www.sevenforums.com/hardware-devices/103184-upgraded-hdd-when-resuming-sleep-mode-bsod-restart-occurs.html
Relevancy 71.81%

I recently purchased an HP G42 - 240US. HP G42-230US Notebook PC - HP Customer Care (United States - English)

The notebook came with Windows 7 Home premium 64x.

Whenever I put the computer into sleep or hibernation mode it becomes unresponsive. The only way to get it to respond is to restart it by holding down the power button and restarting. After which, I get the msg windows has recovered from a serious error.

I had tried doing a bios update but that has not helped. The computer still freezes/crashes when the lid is closed or put in to sleep/hibernation mode.

I currently have no peripherals plugged in, and there is no biometric scanner.

Any help and or suggestions would be much appreciated.

A:New Laptop Crashes on Sleep/Hibernation

I feel your pain and have a dear friend who just had to replace her HP G50 112NR laptop for the sleep mode had fried the mobo. HP wanted $500 to fix it which was more than she paid for it. During her long conversation with HP they told her this was a recognized problem. She bought it at Office Depot and she took it back to them and their service confirmed it was a bad mobo and arranged a deal on transferring her data to a new Toshiba laptop.

http://www.sevenforums.com/bsod-help-support/104452-new-laptop-crashes-sleep-hibernation.html
Relevancy 71.81%

Recently my Dell Inspiron N5110 intel 2.4GHZ, 4Gb Ram, Windows 7 64bit Laptop Refuses to wake from sleep or hibernate. Bios driver?? Worked fine 2 days ago and I dont have an applicable restore point... Also Video and Audio playback get choppy in any player after using not even 2 out of 4gb of RAM. Temporarily I've disabled sleep mode but when not plugged in can be a bit of a battery drainer. Any suggestions would be very helpful and aprreciated. I'm far from a computer tech... THX

A:Laptop won't wake from Sleep/Hibernation, PLZ HELP!

It seems to be a monitor issue. Also when I shut down the computer stays on but the monitor shuts off??? I'm thoroughly stumped. Plz help...

http://www.sevenforums.com/general-discussion/249413-laptop-wont-wake-sleep-hibernation-plz-help.html
Relevancy 71.81%

I deleted accidentally (!) the hibernation file via disk cleanup and also I think cocked up some power settings on my laptop.

Now it powers on and after the Toshiba splash screen all I get is a black screen.

I have seen all the solutions about powercfg, etc but how can I actually make any changes when I can't get into it in the first place?

All the lights are on but there's nobody at home

I'd be really grateful for help as I dont want to have to leave it in anywhere if I can do it myself
 

A:Laptop in permanent hibernation/sleep

Well, it's always safe to back up your PC with a CD etc before doing disk changes.
 

https://forums.techguy.org/threads/laptop-in-permanent-hibernation-sleep.1064149/
Relevancy 71.81%

when i did the powercfg -LASTWAKE, it didn't show the wake source, same thing in event viewer, how do i know what's causing this?
Wake History Count - 1
Wake History [0]
Wake Source Count - 0

A:laptop wakes itself up from sleep or hibernation

Maybe this will help: Fix Windows Vista/7 Sleep mode from waking up by itself

http://www.bleepingcomputer.com/forums/t/433726/laptop-wakes-itself-up-from-sleep-or-hibernation/
Relevancy 71.81%

I upgraded my laptop with a 250GB Samsung SSD EVO. I reinstalled the operating system with the parameter of the bios AHCI active, and when the computer goes into Hibernation crashes with the error 0x000000B8.

Thanks in advance

A:BSoD when go to sleep or hibernation

Hi perritos.

The BSODs are caused by StoneGate IPsec VPN Driver (c:\windows\system32\drivers\sgravpn.sys)

Code:
BugCheck 100000B8, {fffffa8034e02b50, fffffa800aef9060, 0, 0}

*** WARNING: Unable to verify timestamp for sgravpn.sys
*** ERROR: Module load completed but symbols could not be loaded for sgravpn.sys
Probably caused by : sgravpn.sys ( sgravpn+1e14 )

Followup: MachineOwner
---------
And the driver is old.

Code:
fffff880`0304a000 fffff880`030cc000 sgravpn T (no symbols)
Loaded symbol image file: sgravpn.sys
Image path: \SystemRoot\system32\DRIVERS\sgravpn.sys
Image name: sgravpn.sys
Timestamp: Fri Sep 10 20:13:55 2010 (4C8A442B)
CheckSum: 00084389
ImageSize: 00082000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
You may search for possible updates in McAfee | Support. But if still the issue is continue to occur (there is a fair chance), better you uninstall the program; as you have other VPN clients installed already.

http://www.sevenforums.com/bsod-help-support/326322-bsod-when-go-sleep-hibernation.html
Relevancy 71.81%

Hello everyone,

Recently my Lenovo T431s running Windows 7 Pro 64 bit started running into BSOD almost everytime I put it to sleep. Usually it goes to sleep, but when I get back it is already running and sometimes will show the BSOD and sometimes will just show a blank screen.

I already researched similar issues and tried a few approaches, but to no success.

I have uploaded the information generated from the DM Log Collector. Please let me know if you need any other information.

Thank you very much in advance!

A:BSOD after sleep or hibernation

Hello folks, sorry to bump this thread, but I was just wondering if someone could help me?

Thanks!

http://www.sevenforums.com/bsod-help-support/375686-bsod-after-sleep-hibernation.html
Relevancy 71.81%

Hi everyone,

I'm new here and was hoping you all could help me with a problem I have had for a while.

Essentially, my computer blue screens during sleep and then shuts down. Most of the time it is related to something called "Driver State Power Failure." I suspect it is related to my display driver, but I recently uninstalled that, and used windows update to reinstall it, and I am still having the same issue.

I hope I followed all the directions correctly - I ran SF Diagnostic Tool, created a folder, zipped that, and uploaded it to this thread.

Any help you all can provide would be much appreciated!!

A:BSOD During Sleep/Hibernation

Caused by the WLAN driver:
802.11 USB Wireless LAN Card
fffff880`0282a000 fffff880`02937000 netr28ux Tue Sep 15 06:36:45 2009 (4AAF19DD)

These drivers are quite old and need updating:
ATI PCI Express (3GIO) Filter
fffff880`019da000 fffff880`019e2000 AtiPcie Mon Nov 06 17:59:54 2006 (454F6A0A)

Realtek USB 2.0 Card Reader
fffff880`0298b000 fffff880`0299f000 RTSTOR64 Thu Jun 05 13:21:42 2008 (4847CC46)

Realtek High Definition Audio
fffff880`05c29000 fffff880`05de4d80 RTKVHD64 Mon Jul 06 11:18:54 2009 (4A51C17E)

Marvell Yukon 88E8071 PCI-E Gigabit Ethernet Controller
fffff880`0447b000 fffff880`044e0000 yk62x64 Mon Sep 28 10:19:31 2009 (4AC07193)

http://www.sevenforums.com/bsod-help-support/259319-bsod-during-sleep-hibernation.html
Relevancy 71.81%

My computer is running Windows Ultimate 64 bit edition.
When awaking form sleep mode, I get a BSOD.
As instructed, I am attaching the compressed file.
Any and all help will be appreciated!

A:BSOD after sleep/hibernation

Hello,
Start off by remove Hotspot Shield as the dump blames them. You can install when we are done troubleshooting.

Then update these drivers.





Quote:
adfs.SYS Fri Jun 27 08:52:37 2008
Remove all Adobe Software and then install the latest version from Adobe

ckldrv.sys Tue Mar 18 05:46:29 2008
Update CrypKey software - if no update available - uninstall it.

ctac32k.sys Wed Jul 02 20:38:22 2008
Creative Audio Driver

regi.sys Tue Apr 17 03:19:10 2007
InterVideo

RimSerial_AMD64.sys Tue Nov 25 06:01:01 2008
Virtual Serial Port Driver for Blackberry


Regards...

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck C2, {7, 1097, 444000d, fffffa8005c3bbd0}

Unable to load image \SystemRoot\system32\DRIVERS\HssDrv.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for HssDrv.sys
*** ERROR: Module load completed but symbols could not be loaded for HssDrv.sys
GetPointerFromAddress: unable to read from fffff800032b90e0
Probably caused by : HssDrv.sys ( HssDrv+2bac )

Followup: MachineOwner
---------

2: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

BAD_POOL_CALLER (c2)
The current thread is making a bad pool request. Typically this is at a bad IRQL level or double freeing the same allocation, etc.
Arguments:
Arg1: 0000000000000007, Attempt to free pool which was already freed
Arg2: 0000000000001097, (reserved)
Arg3: 000000000444000d, Memory contents of the pool block
Arg4: fffffa8005c3bbd0, Address of the block of pool being deallocated

Debugging Details:
------------------
POOL_ADDRESS: fffffa8005c3bbd0

FREED_POOL_TAG: aPmI

BUGCHECK_STR: 0xc2_7_aPmI

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

PROCESS_NAME: System

CURRENT_IRQL: 0

LAST_CONTROL_TRANSFER: from fffff800031b460e to fffff80003081740

STACK_TEXT:
fffff880`033cb6d8 fffff800`031b460e : 00000000`000000c2 00000000`00000007 00000000`00001097 00000000`0444000d : nt!KeBugCheckEx
fffff880`033cb6e0 fffff880`016ed695 : 00000000`00000000 00000000`00000000 00000000`6370444e 00000000`00000000 : nt!ExDeferredFreePool+0x11eb
fffff880`033cb790 fffff880`04f29bac : fffff880`033cb9d0 fffffa80`059972a8 fffffa80`059972a8 fffffa80`059972a8 : ndis!NdisFreeMemory+0x15
fffff880`033cb7c0 fffff880`033cb9d0 : fffffa80`059972a8 fffffa80`059972a8 fffffa80`059972a8 fffff880`04f33100 : HssDrv+0x2bac
fffff880`033cb7c8 fffffa80`059972a8 : fffffa80`059972a8 fffffa80`059972a8 fffff880`04f33100 00000000`00000004 : 0xfffff880`033cb9d0
fffff880`033cb7d0 fffffa80`059972a8 : fffffa80`059972a8 fffff880`04f33100 00000000`00000004 fffffa80`059c9d00 : 0xfffffa80`059972a8
fffff880`033cb7d8 fffffa80`059972a8 : fffff880`04f33100 00000000`00000004 fffffa80`059c9d00 fffffa80`05c3bbd0 : 0xfffffa80`059972a8
fffff880`033cb7e0 fffff880`04f33100 : 00000000`00000004 fffffa80`059c9d00 fffffa80`05c3bbd0 fffffa80`059972a8 : 0xfffffa80`059972a8
fffff880`033cb7e8 00000000`00000004 : fffffa80`059c9d00 fffffa80`05c3bbd0 fffffa80`059972a8 fffffa80`00000000 : HssDrv+0xc100
fffff880`033cb7f0 fffffa80`059c9d00 : fffffa80`05c3bbd0 fffffa80`059972a8 fffffa80`00000000 00000000`00000000 : 0x4
fffff880`033cb7f8 fffffa80`05c3bbd0 : fffffa80`059972a8 fffffa80`00000000 00000000`00000... Read more

http://www.sevenforums.com/bsod-help-support/145694-bsod-after-sleep-hibernation.html
Relevancy 71.38%

So...the title says it all. The problem occurs at random after I boot up my laptop from hibernation or sleep mode. And...I'm just going to try and describe what happens:
1. Clicks on application (ex. Chrome)
2. Blue spinny thing next to the mouse appears and stays there
3. Application doesn't open/doesn't respond
4. Moves mouse to taskbar and blue spinny thing disappears
5. Proceeds to try and right click to open task manager...when I attempt to right click, nothing happens. So I try to do the CTRL + ALT + DEL method, and that doesn't work either.
6. Realizes the only thing that seems to work during this "freezed"session are my "Sticky Notes"
7. This goes on for a good half an hour, that's basically when I give up and force shut down.

Hope that explains my situation, would appreciate any and all help!! Thanks everyone

A:Laptop Hangs and Then Freezes...Usually After Hibernation/Sleep

I'm going to hazard a tentative guess at this being a memory issue. In lieu of any other suggestions (which may come, give it time for other members to see this problem), I'd suggest you download and install Memory Cleaner - Software - Koshy John .

This small program just sits happily in the background and every five minutes will clear "Working Set" memory (applications which are open now, and using chunks of memory they should have let go of by now) and the system cache (Windows stuff, who knows what Windows does?).
Note: This is something you have to set it to do in the options.

You can also trigger the two types manually, with the pair of buttons available in the interface.
As I say, hang fire for an hour or two and see if anyone else responds because I am far from familiar with this type of problem, and am only working from my own (admittedly limited) knowledge here.

http://www.sevenforums.com/bsod-help-support/252064-laptop-hangs-then-freezes-usually-after-hibernation-sleep.html
Relevancy 71.38%

This was never a problem before...

Here is what happens... I am on my laptop, when i am done with it and go to bed, i close the laptop. It remains closed throughout the day until i come home from school. I open up the laptop and the screen is just black. It does not resume its self. The computer is on though becuase i can hear the fans going and other activity. So I have to manually hold down the button to turn it off and then turn it back on, which is a great annoyance.

How can i fix this from happening?
My computer is a Toshiba Satellite 1415
 

A:Laptop wont recover from sleep/hibernation

Alas it's not uncommon for the computer to act in this manner, its actually "dying while asleep" for want of a better term.

More likely it dies immediately it is asked to wake up.

The cause could be any of the drivers or added hardware (if any), it's very hard to diagnose.

Laptop hardware is usually OK with hibernation, the mode was designed for use with laptop hardware in mind.

Its even possible that Windows updates may have caused a problem, with some incompatability but that is also hard to prove.

I would start by reloading every driver with the latest available from Toshibas support website.
 

https://forums.techguy.org/threads/laptop-wont-recover-from-sleep-hibernation.431434/
Relevancy 71.38%

Hi I am posting in regards to a blue screen error my four year old Dell XPS M laptop has suffered recently The laptop has had two hard drives throughout it's life thus far the second and current it has used since October and is a GB Seagate Momentus ST AS SATA I have never had any problems in terms of crashes or blue screens from this drive until two weeks ago when after leaving the laptop on hibernate mode for a few minutes the laptop powered itself back on while the monitor remained off Eventually the monitor turned on but all there was was a black void of a screen and the mouse cursor there also didn't seem to be any signs of it rebooting As I had never seen this before I foolishly panicked and turned the thing off by holding the power button down Unfortunately / and Laptop hibernation freezing restarting sleep after rather than restart with the usual quot windows did not shut down properly safe mode options quot message and rebooting as normal this lead to a series of boot up mishaps crashes and power button holding shutoffs which concluded with the thing just giving up and not booting to Windows at all As a consequence I had to reinstall the Laptop freezing and restarting after hibernation / sleep entire OS and all the drivers from the disks that came originally pre-installed with the laptop As this was a clean install I presumed the problem would be wiped away with the original installation data but since I feared the crash was caused by the hibernation feature I not only stopped using it but disabled the option completely using command prompt I began using sleep mode instead So two weeks later and all on the laptop seemed to be back fine the way it was before that horrible incident but again earlier tonight while putting the laptop to sleep mode it again resumed itself without a screen and then the same lone cursor Fortunately I actually waited a while this time and it managed to restart itself with nothing seemingly damaged or data lost I then receive a box with the following message Windows has recovered from an unexpected shutdown Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode f BCP BCP F BCP BCP BE C OS Version Service Pack Product Files that help describe the problem C Windows Minidump Mini - dmp C Users Skull AppData Local Temp WER- - sysdata xml C Users Skull AppData Local Temp WERAF tmp version txt I'm not sure what to make of this I am most certain it is the same problem that caused the original hibernation crash but as I was unable to record any info regarding that I can't be Unfortunately seeing as this is a past problem returning to a freshly installed OS with no new drivers added excluding the ones that came with the laptop disks which I've never had any problems with before I am concerned the problem may lie with the hardware of the laptop or the hard drive itself failing perhaps rather than any issues with drivers or software I want to make sure however which is why I am here to post the dump files for analysis I apologize for the incredibly long winded post or if my points are hard to understand If there is any info I have not included that you may need I will do my best to elaborate on it

A:Laptop freezing and restarting after hibernation / sleep

It is difficult to find patterns and debug crashes with only one .dmp file. Are you deleting .dmp files with ccleaner?


Recommendations:The one crash included in your reports was likely caused by your Intel wireless device driver. The driver is from 2007 and likely to cause problems with Windows Vista. You can update it from the following Dell site. The Dell model is different, but the device should be the same.Dell (R) Wireless WiFi Link 4965AGN
You are also missing Vista Service Pack 2.Learn how to install Windows Vista Service Pack 2 (SP2)
Outdated and Problematic Drivers:You should update/replace/remove the following drivers. Any drivers that are known to cause BSODs, please remove the software or remove the drivers and then remove the device; steps to do so are given after the list of outdated drivers. If you have ASACPI.sys installed, make sure it is updated and not pre-2009; pre-2009 versions are known to cause BSODs:
giveio.sys Wed Apr 3 20:33:25 1996 (316334F5)
ADC Analyzer/SwiftForth/Disspy - ?SpeedFan?
http://www.carrona.org/drivers/driver.php?id=giveio.sys

fanio.sys Fri Feb 16 02:05:48 2007 (45D573EC)
FanIO Driver [I8kfanGUI]
http://www.carrona.org/drivers/driver.php?id=fanio.sys

NETw4v32.sys Wed Aug 8 09:26:03 2007 (46B9E08B)
Intel Wireless WiFi Link Driver
http://www.carrona.org/drivers/driver.php?id=NETw4v32.sys

nvlddmkm.sys Wed Sep 12 18:58:39 2007 (46E88B3F)
nVidia Video drivers
http://www.carrona.org/drivers/driver.php?id=nvlddmkm.sys

stwrt.sys Thu Sep 13 09:29:43 2007 (46E95767)
SigmaTel Audio Driver
http://www.carrona.org/drivers/driver.php?id=stwrt.sys

Apfiltr.sys Wed Dec 26 04:02:44 2007 (477234D4)
Alps pointing device
http://www.carrona.org/drivers/driver.php?id=Apfiltr.sys

rsdrv.sys Thu Feb 12 06:01:46 2009 (49941DBA)

rsdrv.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

mcdbus.sys Tue Feb 24 03:42:13 2009 (49A3CF05)
MagicISO SCSI Host Controller driver
http://www.carrona.org/drivers/driver.php?id=mcdbus.sys

To update drivers, make sure to download the drivers from the manufacturer and not using 3rd party programs. Your drivers should be found from your motherboard support site (ASUS, Gigabyte, MSI, etc.) or your vendor support site (Dell, HP, Toshiba, Sony, etc.) first. If you have devices you bought yourself, the drivers for those devices need to be downloaded from the manufacturer support site for those devices. If you need help, let us know.

To remove drivers, do so by uninstalling the device or software associated with the driver. Devices can be uninstalled through device manager, and then the device itself should be physically removed from the system if possible.Uninstall or change a program

Open Device Manager
Device Concerns:
Code:
Biometric Coprocessor USB\VID_0483&PID_2016\5&1397FC76&0&2 The drivers for this device are not installed.
Please install the drivers for the above device. If you are not using the device, physically remove it from the system and proceed with the general USB troubleshooting steps.General USB Troubleshooting
Software Concerns:Security Software: ??? Make sure to install security software. I recommend:Microsoft Security Essentials - Microsoft Windows coupled with Malwarebytes. Do not start the free trial of Malwarebytes. Just use the standalone version, update it, and scan your computer once a week with Malwarebytes and with Microsoft Security Essentials.

After installing your security software, update it, and then run full scans today with each program. Report back the results of the scans.

3rd Party Drivers: The following is for information purposes only. My recommendations were given above. The drivers that follow belong to software or devices that... Read more

http://www.techsupportforum.com/forums/f299/laptop-freezing-and-restarting-after-hibernation-sleep-681967.html
Relevancy 70.95%

Hi guys,

I have tried to search in the forum for the same symptoms, but it seems my problem is different from the others.. even some of the hotfix recommended for them are not applicable for me.
Anyway, I really hope that someone can help me pinpoint what is the problem I actually have here...

Whenever I try to put the computer on sleep mode or hibernation mode, it will turn black and then stay for quite some time, then it just shutdown..
When I turn it back on, it says that there is a BSOD (I forgot to screencapture the message detail given, let me know if it's needed)

I have attached here the zip file from the SF Diagnostic Tool as instructed.

Since my zip file is more than 8MB, I have to split it into 2 files..
eddix.zip contains the most of the files needed
eddix2.zip contains old .dmp files

Thanks in advance..

A:BSOD when going to sleep or hibernation mode

Daemon Tools, Alcohol 120% (and 52%) and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known BSOD causer. Uninstall Alcohol 120% (and 52%) at first. Then download SPTD standalone installer from Disk-Tools.com, and execute the downloaded file as guided below :
Double click to open it.
Click this button only:

If it is grayed out, as in the picture, there is no more SPTD in your system, and you just close the window.
Uninstall McAfee Using McAfee Removal Tool.

Free up the startup. Windows does not need any other program to auto start with it, but the auto start programs often conflicts and causes various problems including BSODs.
Click on the Start button
Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the “Startup” tab.
Deselect all items other than the antivirus.
Apply > OK
Accept then restart.
Now, we are seeing that the SecuRemote Miniport (c:\windows\system32\drivers\fw.sys) is causing some issues there.

Code:
8356e09c 9b0c0c8cUnable to load image \SystemRoot\system32\DRIVERS\fw.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for fw.sys
*** ERROR: Module load completed but symbols could not be loaded for fw.sys
fw+0x8bc8c
It is a ZoneAlarm Driver, used in Kaspersky too.

We need to see how it is running without Kaspersky. Uninstall Kaspersky using Kaspersky Removal Tool. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.
Download, install and update those, and then run full system scans with both of them, one by one.

Let us know the results.

http://www.sevenforums.com/bsod-help-support/310145-bsod-when-going-sleep-hibernation-mode.html
Relevancy 70.95%

Hi,

As in the title, I get the blue screen everytime I log on back from sleep or hibernation to windows. I have seriously tried A LOT to solve this by reading online, included this forum. All scans show me the computer is fine. Nothing works. Windows still crashes a couple of minutes after I log back in from sleep or hibernate.

Please help me. I ran the DM log collector (see attached zip) and truly hope you can solve this problem for me.

Best Regards
Jarod

A:BSOD after sleep or hibernation mode

Please run the DM Log Collector tool again, there are only dump files saved.
Before uploading the zip, please make sure it contains at least following files18 .txt,
1 .nfo
If it doesn't, please try booting in safe mode and run the DM Log Collector tool again.

http://www.sevenforums.com/bsod-help-support/384842-bsod-after-sleep-hibernation-mode.html
Relevancy 70.95%

My laptop is a HP ProBook 4445s with AMD A8-4500m APU, and is a fairly recent model. It has been experiencing random BSODs when entering sleep or hibernation, so I never get to see the actual screen. I only see the error, the next time I power on. It also seems to be the same problem all the time. Since I had done a drive cleanup, SF Diagnostics can only find 2 BSOD reports, but I assure you that it has been the same problem throughout the two months I have this laptop. It is always:

DRIVER_POWER_STATE_FAILURE
with Bug Check Code: 0x0000009f
and always a ntoskrnl.exe issue.

All of the drivers have been updated to the latest that HP has provided here. I can not locate the driver that causes this failure, so I am hoping that people of this forum will be able to find the root cause.

A:BSOD when going to Sleep or Hibernation (HP ProBook)

Welcome

Your BSoD is caused by your Broadcom 802.11g Network Adapter - Dell Wireless 1390 WLAN Mini-Card


Code:
Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 0 fffffa8004fa2050 00000000 00000000-00000000
Unable to load image \SystemRoot\system32\DRIVERS\bcmwl664.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for bcmwl664.sys
*** ERROR: Module load completed but symbols could not be loaded for bcmwl664.sys
\Driver\BCM43XX
Args: 00015500 00000000 00000005 00000003
[ 16, 2] 0 e1 fffffa8004fa3e20 00000000 fffff80003319200-fffffa800508af90 Success Error Cancel pending
\Driver\vwifibus nt!PopSystemIrpCompletion
Args: 00015500 00000000 00000005 00000003
[ 0, 0] 0 0 00000000 00000000 00000000-fffffa800508af90

Args: 00000000 00000000 00000000 00000000
0: kd> lmvm bcmwl664
start end module name
fffff880`042d1000 fffff880`0475b000 bcmwl664 T (no symbols)
Loaded symbol image file: bcmwl664.sys
Image path: \SystemRoot\system32\DRIVERS\bcmwl664.sys
Image name: bcmwl664.sys
Timestamp: Fri Mar 09 17:15:31 2012 (4F59E653)
CheckSum: 0048A270
ImageSize: 0048A000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Check for updates on its drivers. Or re-install the program and its drivers afresh.

Source: Driver Reference Table

Problematic Software:

Code:
Start Menu\Programs\Norton 360 Public:Start Menu\Programs\Norton 360 Public
Start Menu\Programs\Norton JOSEOLIVERA-HP\admin:Start Menu\Programs\Norton JOSEOLIVERA-HP\admin
Norton is a known cause to BSoDs. Uninstall it and all its components. Replace with MSE.
→ Norton Removal Tool
→ Microsoft Security Essentials - Free Antivirus for Windows

Keep us posted

http://www.sevenforums.com/bsod-help-support/257576-bsod-when-going-sleep-hibernation-hp-probook.html
Relevancy 70.95%

Hi, i am completely new to this forum so please excuse my errors. I would like to get my problem fixed and then i would like to consider contributing too. anyway ive had my hp laptop (Touch Screen running windows 8) and it seems to give me a blue screen of death every time it wakes up including just shutting the screen. in the past i have updated drivers, updated to windows 8.1, and installed the factory image. none seem to quite solve the problem. the typical error message is "DRIVER_IRQL_NOT_LESS_OR_EQUAL (iaStorA.sys)". but sometimes it is different. I have attached the export from dm log collector and i believe it is in the right format. thanks in advanced


I also attached the new log file you requested

A:BSOD after sleep, hibernation, and sometimes boot

Sorry for the delay in responding. There just aren't that many people who do BSOD analysis, so at times we get a bit overwhelmed!

Do your still need help with this problem?
I will be notified if you reply to this topic and will respond within 48 hours.

While waiting:
- get ALL available Windows Updates. It may take several trips to get them all.
- get ALL available HP updates. Use the HP Support Assistant to get them all.
- try these free diagnostics: Hardware Diagnostics

http://www.eightforums.com/bsod-crashes-debugging/47354-bsod-after-sleep-hibernation-sometimes-boot.html
Relevancy 70.95%

Pleas help, BSOD happens when opening the lid of laptop.

A:BSOD when wake up from hibernation/sleep

0x116 bugchecks indicate an attempt to reset the graphics card and display driver failed to respond within the allocated time interval.
It's mainly caused by a failing GPU or bad display driver.

I suggest updating your display driver to the latest version.
If you are unsure how then here's some instructions.

How-To Install AMD Catalyst? Drivers For A Windows? Based System

I also recommend running Furmark to see if your GPU is failing (I doubt it but it's worth ruling it out as a possibility).
Follow these instructions.

Video Card - Stress Test with Furmark

Post back the results.

http://www.sevenforums.com/bsod-help-support/330825-bsod-when-wake-up-hibernation-sleep.html
Relevancy 70.95%

Most of the time this happens. Sometimes it's fine for a week or so. It seemed to start after updating my logitec drivers. The BSOD shows KS.SYS as an offending file.

A:BSOD when recovering from sleep or hibernation

Enable Driver Verifier to monitor the drivers.
Driver Verifier -Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.



   Information

Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.


   Warning

Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point Manually before enabling DV.



   Tip
If you fail to get on the Desktop because of DV, Boot into Advanced Boot Options > Safe mode. Disable DV there. Now boot normally again, and try following the instruction of enabling DV again.
If you cannot boot in Safe mode too, do a System Restore to a point you made earlier.

Let us know the results, with the subsequent crash dumps, if any.

http://www.sevenforums.com/bsod-help-support/329930-bsod-when-recovering-sleep-hibernation.html
Relevancy 70.95%

OMG! It's here again:
http://www.sevenforums.com/crashes-d...ml#post1216715
It was working two days and now - the same problem.
Could you please help me?
Thank you very much!

A:BSOD - hibernation/sleep mode - again

  
Quote: Originally Posted by hlavica


OMG! It's here again:
http://www.sevenforums.com/crashes-d...ml#post1216715
It was working two days and now - the same problem.
Could you please help me?
Thank you very much!


These were caused by your K57nd60x.sys, Broadcom NetLink Gigabit Ethernet NDIS6.x Unified Driver..
I would re-install it with the newest revision.

http://www.sevenforums.com/bsod-help-support/142028-bsod-hibernation-sleep-mode-again.html
Relevancy 70.95%

Hi, hope you'll help me.
Got repeatedly BSOD when turning to hibernation/sleep mode.
Information:
- Windows 7 x86 (32 bit)
- original OEM version
- Computer was purchased in December 2010
Many thanks!

A:BSOD - hibernation/sleep mode

Hi there,

This seems pretty straightforward, with your Broadcom network drivers as the cause. Install these updated ones: Broadcom.com - Ethernet NIC NetLink Driver Downloads
Code:
k57nd60x.sys Sat May 15 08:51:27 2010 (4BEE98CF)
See if that does the trick; if not, post back with a new report.

...Summary of the dumps:

Code:

Built by: 7600.16617.x86fre.win7_gdr.100618-1621
Debug session time: Mon Jan 31 04:23:41.974 2011 (UTC - 5:00)
System Uptime: 0 days 1:09:38.098
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
FAILURE_BUCKET_ID: 0x9F_3_vwifimp_IMAGE_vwifibus.sys
SystemProductName = TravelMate 5742G
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16617.x86fre.win7_gdr.100618-1621
Debug session time: Mon Jan 31 02:13:18.504 2011 (UTC - 5:00)
System Uptime: 0 days 1:14:08.644
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
FAILURE_BUCKET_ID: 0x9F_3_k57nd60x_IMAGE_pci.sys
SystemProductName = TravelMate 5742G
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16617.x86fre.win7_gdr.100618-1621
Debug session time: Sun Jan 30 15:01:03.119 2011 (UTC - 5:00)
System Uptime: 0 days 0:52:26.258
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
FAILURE_BUCKET_ID: 0x9F_3_k57nd60x_IMAGE_pci.sys
SystemProductName = TravelMate 5742G
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16617.x86fre.win7_gdr.100618-1621
Debug session time: Sun Jan 30 14:06:26.566 2011 (UTC - 5:00)
System Uptime: 0 days 5:14:09.080
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
FAILURE_BUCKET_ID: 0x9F_3_k57nd60x_IMAGE_pci.sys
SystemProductName = TravelMate 5742G
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16617.x86fre.win7_gdr.100618-1621
Debug session time: Sun Jan 30 08:50:58.786 2011 (UTC - 5:00)
System Uptime: 0 days 1:41:07.300
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
FAILURE_BUCKET_ID: 0x9F_3_k57nd60x_IMAGE_pci.sys
SystemProductName = TravelMate 5742G
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16617.x86fre.win7_gdr.100618-1621
Debug session time: Sun Jan 23 08:27:58.831 2011 (UTC - 5:00)
System Uptime: 0 days 3:07:39.970
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
FAILURE_BUCKET_ID: 0x9F_3_k57nd60x_IMAGE_pci.sys
SystemProductName = TravelMate 5742G
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16617.x86fre.win7_gdr.100618-1621
Debug session time: Thu Jan 20 11:15:48.485 2011 (UTC - 5:00)
System Uptime: 0 days 1:24:55.624
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
FAILURE_BUCKET_ID: 0x9F_3_k57nd60x_IMAGE_pci.sys
SystemProductName = TravelMate 5742G
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16617.x86fre.win7_gdr.100618-1621
Debug session time: Thu Jan 20 08:39:52.347 2011 (UTC - 5:00)
System Uptime: 0 days 0:17:22.861
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
FAILURE_BUCKET_ID: 0x9F_3_k57nd60x_IMAGE_pci.sys
SystemProductName = TravelMate 5742G
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16617.x86fre.win7_gdr.100618-1621
Debug session time: Thu Jan 20 04:42:26.349 2011 (UTC - 5:00)
System Uptime: 0 days 0:28:53.488
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
FAILURE_BUCKET_ID: 0x9F_3_k57nd60x_IMAGE_pci.sys
SystemProductName = TravelMate 5742G
??????????????????????????????????????????????????????????????????????????????????????``

http://www.sevenforums.com/bsod-help-support/141593-bsod-hibernation-sleep-mode.html
Relevancy 70.95%

OS: Windows 7 64Bit
Machine: HP ProBook 640 G1

Example here:

Bug Check String : DRIVER_POWER_STATE_FAILURE
Bug Check Code : 0x0000009f
Parameter 1 : 00000000`00000003
Parameter 2 : fffffa80`04751060
Parameter 3 : fffff800`00b9e3d8
Parameter 4 : fffffa80`0a17f330
Caused By Driver : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+72a40
File Description : NT Kernel & System
Product Name : Microsoft? Windows? Operating System
Company : Microsoft Corporation
File Version : 6.1.7601.18798 (win7sp1_gdr.150316-1654)
Processor : x64
Crash Address : ntoskrnl.exe+72a40

Any help with identifying the cause would be much appreciated!

A:BSOD When machine goes to sleep/hibernation

I am getting the same thing for a number of my end users. It seems to happen when they lock their computer while on a docking station, close the lid, undock and then go to another area in the building. When opening the lid they either receive the same BSOD or the lock screen. However, when they click CTRL+ALT+Delete all they then see is the Cancel button.

I am testing the newest Intel Graphics driver 10.18.14.4139 along with the newest BIOS 1.33. If it works I will let you know.

Thanks,

Tucker

http://www.sevenforums.com/bsod-help-support/379055-bsod-when-machine-goes-sleep-hibernation.html
Relevancy 70.52%

This problem has been going on already for about a month as far as I can recall The laptop turns on but the display is totally empty and Windows does not start at all This happens frequently after hibernation sleep What I do usually is I just turn the laptop off and turn it on again and the OS starts successfully but now it takes more than twice and it may be dangerous already to do such The laptop is still under warranty and I have it checked already at the store where I bought it The tech person did a few tweaks in the power settings It did work but after a little less than hrs the problem came back I am working as an architectural intern and most of the programs I use are heavy D drafting and D modeling softwares e g Autocad Sketchup and Lumion as well as Adobe Photoshop I use Sketchup very often Just mentioning this as it may have some bearing to the problem Thank you very much

A:Laptop turns on but doesn't load OS after hibernation/sleep

Hi, Welcome to SF.

I found this post from our member gergrocker. This might help.








  
Quote: Originally Posted by gregrocker


Sleep issues are almost always caused by the display driver so I would start by updating it, or trying another. Driver Install - Device Manager

You can troubleshoot Sleep and Hibernate by setting them to 1 and 2 minutes in Power Options. Use Balanced Plan. Then work through these Sleep Mode Problems - Vista Forums.

If this is still the factory preinstalled WIn7 then that is a corrupt install which causes many of these problems, which is why most tech enthusiasts will not run it but choose to Clean Reinstall - Factory OEM Windows 7

At the minimum I'd Clean Up Factory Bloatware

If that doesn't help then work through these Troubleshooting Steps for Windows 7

http://www.sevenforums.com/general-discussion/308658-laptop-turns-but-doesnt-load-os-after-hibernation-sleep.html
Relevancy 70.52%

when ever i sleep or hibernate my dell inspiron pc it hangs black screen with very little hdd activity and remains so until i forcibly shutdown with or during hangs screen when black hibernation laptop sleep by pressing power button Ater reboot i am able to go to sleep or hibernation but after a continuous operation of more than mins this error occurs I removed alcohol uninstalled sptd driver and updated all drivers i could find laptop hangs when during sleep or hibernation with black screen I recently formatted the pc with all win updates installed with sp i have kis security suite all updated laptop hangs when during sleep or hibernation with black screen Please help Memory diagnostics result all pass SFC scannow did'nt find integrate voilatio also i found these events in administrative log please tell if they have something to do with it Log Name System Source Microsoft-Windows-WMPNSS-Service Date - - Event ID Task Category None Level Error Keywords Classic User N A Computer RDS-FireBlade Description Service 'WMPNetworkSvc' did not start correctly because CoCreateInstance CLSID UPnPDeviceFinder encountered error ' x ' Verify that the UPnPHost service is running and that the UPnPHost component of Windows is installed properly Event Xml lt Event xmlns quot Error quot gt lt System gt lt Provider Name quot Microsoft-Windows-WMPNSS-Service quot Guid quot A DC C - A- FB -BB - B AEBED C quot EventSourceName quot WMPNetworkSvc quot gt lt EventID Qualifiers quot quot gt lt EventID gt lt Version gt lt Version gt lt Level gt lt Level gt lt Task gt lt Task gt lt Opcode gt lt Opcode gt lt Keywords gt x lt Keywords gt lt TimeCreated SystemTime quot - - T Z quot gt lt EventRecordID gt lt EventRecordID gt lt Correlation gt lt Execution ProcessID quot quot ThreadID quot quot gt lt Channel gt System lt Channel gt lt Computer gt RDS-FireBlade lt Computer gt lt Security gt lt System gt lt EventData gt lt Data Name quot ServiceName quot gt WMPNetworkSvc lt Data gt lt Data Name quot ErrorCode quot gt x lt Data gt lt EventData gt lt Event gt Log Name Application Source Microsoft-Windows-WMI Date - - Event ID Task Category None Level Error Keywords Classic User N A Computer RDS-FireBlade Description Event filter with query quot SELECT FROM InstanceModificationEvent WITHIN WHERE TargetInstance ISA quot Win Processor quot AND TargetInstance LoadPercentage gt quot could not be reactivated in namespace quot root CIMV quot because of error x Events cannot be delivered through this filter until the problem is corrected Event Xml lt Event xmlns quot Error quot gt lt System gt lt Provider Name quot Microsoft-Windows-WMI quot Guid quot edeee - afe- -b -d c b b f quot EventSourceName quot WinMgmt quot gt lt EventID Qualifiers quot quot gt lt EventID gt lt Version gt lt Version gt lt Level gt lt Level gt lt Task gt lt Task gt lt Opcode gt lt Opcode gt lt Keywords gt x lt Keywords gt lt TimeCreated SystemTime quot - - T Z quot gt lt EventRecordID gt lt EventRecordID gt lt Correlation gt lt Execution ProcessID quot quot ThreadID quot quot gt lt Channel gt Application lt Channel gt lt Computer gt RDS-FireBlade lt Computer gt lt Security gt lt System gt lt EventData gt lt Data gt root CIMV lt Data gt lt Data gt SELECT FROM InstanceModificationEvent WITHIN WHERE TargetInstance ISA quot Win Processor quot AND TargetInstance LoadPercentage amp gt lt Data gt lt Data gt x lt Data gt lt EventData gt lt Event gt Log Name System Source Microsoft-Windows-WLAN-AutoConfig Date - - Event ID Task Category None Level Warning Keywords User SYSTEM Computer RDS-FireBlade Description WLAN AutoConfig service has successfully stopped Event Xml lt Event xmlns quot Error quot gt lt System gt lt Provider Name quot Microsoft-Windows-WLAN-AutoConfig quot Guid quot D DD- - - -D BE D D DE quot gt lt EventID gt lt EventID gt lt Version gt lt Version gt lt Level gt lt Level gt lt Task gt lt Task gt lt Opcode gt lt Opcode gt lt Keywords gt x lt Keywords gt lt TimeCreated SystemTime quot - - ... Read more

A:laptop hangs when during sleep or hibernation with black screen

Hello rajdeepak and welcome if you feel it might be a memory issue and want to do a thorough memory test mate use memtest you need to make a bootable disk for it set the BIOS to boot from optical and let it run.

This app does take a fair while to run and you should do at least seven passes. Sometimes you may find errors fairly quickly. This doesn't involve the OS by the way.

Memtest86+ - Advanced Memory Diagnostic Tool

http://www.sevenforums.com/general-discussion/270195-laptop-hangs-when-during-sleep-hibernation-black-screen.html
Relevancy 70.09%

I have dual booted windows 7 and ubuntu 11.04 .For this I had to reinstall windows 7.I use grub loader to dual boot the os.Ever since dual booting i have problems in putting windows 7 to sleep (by closing the lid).sometimes it does sleep but other times it just shuts down and gives me the bsod error when i turn it back on

System Spec:
Microsoft Windows 7 Ultimate 64-bit 7600 Multiprocessor Free
Intel(R) Core(TM) i5-2430M CPU @ 2.40GHz
Motherboard:LENOVO Emerald Lake
BIOS:default System BIOS,WB03243506WB0109190J,45CN38WW
Graphics:NVIDIA GeForce GT 525M,Intel(R) HD Graphics 3000
Sound:Realtek High Definition Audio,Bluetooth Hands-free Audio,Intel(R) Display Audio
laptop is about 6 months old.

A:BSOD while sleep/hibernation ,error 0x0000009f

SP1 isn't installed, please do the following:





Quote:
Installing Windows 7 Service Pack 1
1. Visit the PC manufacturer's website and update ALL drivers. DO NOT use Windows Update or the "Update drivers" function of Device Manager.
2. Check Device Manager for any unknown/disabled devices - if there are unknown/disabled devices, fix them with the latest drivers from the device manufacturer's website (not the PC Manufacturer)
3. Visit Windows Update and get all updates (may take repeated visits)
4. Visit Windows Update and get Service Pack 1 (usually under Important Updates). Read these notes for installing SP1: Steps to follow before you install Windows 7 SP1 and Windows Server 2008 R2 SP1 from the Microsoft Download Center
5. Visit Windows Update and get any other available updates. May take repeated visits, but keep it up until you get several "Windows is updated" results.
If you're having difficulties with installing a Service Pack, please use the SURTool from this link: What is the System Update Readiness Tool?
Also, check out this troubleshooting link from Microsoft: Troubleshoot problems installing Service Pack 1 (SP1) for Windows 7 and Windows Server 2008 R2

I have had limited success in installing updates/Service Packs when using a "clean boot". I suspect that I'm just bypassing the problem - and that it can come back to bite me in the butt later on.


Memory dumps point to Connectify or your networking drivers.
Uninstall Connectify to see if that stops the memory dumps.
If not, then update your networking driver(s)

Also, Daemon Tools (and Alcohol % software) are known to cause BSOD's on some Win7 systems (mostly due to the sptd.sys driver, although I have seen dtsoftbus01.sys blamed on several occasions).
Please uninstall the program, then use the following free tool to ensure that the troublesome sptd.sys driver is removed from your system (pick the 32 or 64 bit system depending on your system's configuration): DuplexSecure - FAQ

Some free alternatives (I don't use them, so I can't comment on them)

MagicISO - Convert BIN to ISO, Create, Edit, Burn, Extract ISO file, ISO/BIN converter/extractor/editor

The following info is just FYI, I've already addressed the issues that I saw in the above paragraphs

- Further info on BSOD error messages available at: http://www.carrona.org/bsodindx.html
- Info on how to troubleshoot BSOD's (DRAFT): http://www.carrona.org/userbsod.html
- How I do it: http://www.carrona.org/howidoit.html

3RD PARTY DRIVERS PRESENT IN THE DUMP FILES
Code:

avgfwd6a.sys Sun May 22 18:33:25 2011 (4DD98F35)
sptd.sys Sun Mar 22 08:35:35 2009 (49C63097)
iaStor.sys Mon Sep 13 21:23:32 2010 (4C8ECE94)
amdxata.sys Fri Mar 19 12:18:18 2010 (4BA3A3CA)
avgmfx64.sys Sun Aug 07 23:41:46 2011 (4E3F5AFA)
AVGIDSEH.Sys Sun Jul 10 18:36:50 2011 (4E1A2982)
LhdX64.sys Mon Jan 11 10:06:58 2010 (4B4B3E92)
avgrkx64.sys Tue Sep 13 00:02:34 2011 (4E6ED5DA)
nvpciflt.sys Tue May 15 03:36:26 2012 (4FB2077A)
avgtdia.sys Sun Jul 10 18:46:53 2011 (4E1A2BDD)
avgldx64.sys Thu Oct 06 23:55:41 2011 (4E8E783D)
IntcDAud.sys Tue Dec 06 06:23:07 2011 (4EDDFB1B)
SynTP.sys Wed Dec 22 22:20:47 2010 (4D12C00F)
abv88qeh.SYS Thu Sep 06 08:09:33 2007 (46DFEDFD)
connctfy.sys Thu May 27 05:19:35 2010 (4BFE3927)
RTSUVSTOR.sys Thu Jul 28 02:12:19 2011 (4E30FDC3)
Netwsw00.sys Mon Mar 12 17:06:43 2012 (4F5E6563)
AcpiVpc.sys Fri Nov 26 03:40:25 2010 (4CEF7279)
btwampfl.sys Thu Jan 05 18:14:07 2012 (4F062EBF)
RTKVHD64.sys Tue Mar 27 05:01:50 2012 (4F7181FE)
rtsuvc.sys Wed Dec 15 03:57:03 2010 (4D0882DF)
btwavdt.sys Wed Dec 14 16:30:32 201... Read more

http://www.sevenforums.com/bsod-help-support/233050-bsod-while-sleep-hibernation-error-0x0000009f.html
Relevancy 70.09%

Hi,

id like to know if anyone could help me out ?

Its like the 10th time i get this message and decide its time to find a solution,

What i remember from the BSOD is this message DRIVER_POWER_STATE_FAILURE after it crashed about 5-10 minutes after i woke it up from hibernation.Thats all i know

I have windows x64 professional.

Ive uploaded a DM LOG
Thanks.
DoeX

A:Bsod driver_power_state_failure after waking up from hibernation/sleep

Quote:
10/20/2014 9:32 AM Windows Error Reporting
Fault bucket X64_0x9F_3_POWER_DOWN_IMAGE_AiCharger.sys,
Event Name: BlueScreen
Bucket=X64_0x9F_3_POWER_DOWN_IMAGE_AiCharger.sys


Uninstall ASUS Charger. It causes BSOD everywhere it is present.

Let us know how the computer is running without it.

http://www.sevenforums.com/bsod-help-support/349480-bsod-driver_power_state_failure-after-waking-up-hibernation-sleep.html
Relevancy 70.09%

Hi guys,

I've been getting frequent BSOD after Windows goes to Sleep. I'm getting BAD_SYSTEM_CONFIG_INFO, KERNEL_DATA_INPAGE_ERROR and CRITICAL_OPJECT_TERMINATION errors pretty regularly. I ran chkdsk on my C: drive and got a registry file failure. This is a fairly recent build (<8 months). Any help would be appreciated.

Specs:

OS: Windows 7 Home Premium 64bit retail
CPU: Intel Core i7-2600K CPU @ 3.40GHz
Motherboard: ASUS P8P67 Pro
Memory: PNY 4GB DDR3 PC3-10666; PNY [email protected] DDR3 PC3-10666
Graphic Card: NVIDIA GeForce GTS 250
Monitor(s) Displays: Dell S199WFP; Generic PnP Monitor
Screen Resolution: 1440 x 900; 1280 x 1024
Hard Drives:
Seagate 1TB SATA (ST3100003 40AS SCSI)
Western Digital Caviar Green 2TB, 32 MB Cache (WDC WD20 EADS-00R6B0 SCSI)

A:Frequent BSOD after Windows goes to Sleep/Hibernation.

n00b101,

Avast can be a contributing cause of BSOD'S .
Please remove and replace with Microsoft Security Essentials AT LEAST TO TEST.

http://files.avast.com/files/eng/aswclear5.exe

Microsoft Security Essentials - Free Antivirus for Windows

http://www.sevenforums.com/bsod-help-support/224340-frequent-bsod-after-windows-goes-sleep-hibernation.html
Relevancy 70.09%

Sometimes after I wake it up from hibernation the computer freezes after the resuming Windows screen. In a black screen with a blinking cursor at top left. After reset it wakes up fine after skipping a resume error. Does anyone know why?

Thanks

A:Freeze after resuming hibernation.

Please run SFC /scannow via CMD.

If you are unaware how to do that follow these steps here: Windows 7 Tips and Tools | Tech Support Forum

http://www.techsupportforum.com/forums/f217/freeze-after-resuming-hibernation-658119.html
Relevancy 70.09%

Windows 8 is clean-installed on a new primary partition of a harddisk. All device-drivers came from DVD Windows 8 Setup, there is no any driver updated yet.

Windows 8 can go hibernation but can't resume from the hibernation. The Windows 8 logo dissappeared fast and the laptop immediatelly went off, I didn't see any blue screen.
Here I attached some files that are collected by SF_Diagnostics_Tool.
MEMTEST86 reported no error. BIOS has been updated to latest version (before ver.3303, after ver.3315).
Any help is appreciated. Thanks

A:Windows 8 went down when resuming from hibernation

It's stuck in a Hibernation state on the motherboard. Toshiba Satellite? They do this a lot.Try turning it back on, then Hold the power button for 5 seconds to see if you can get it out of that mode. Keep doing it until you see the default BIOS screen

While it is in that resume from Hibernation mode, you can't get into your BIOS. Once the system is out of that mode, you can get into your BIOS and change your power settings. Not knowing what you have, I can;t tell you what settings to try. But if you can get it out of that mode, you'll have to refrain from using Hibernation until you can find out what caused it.

I think your dump file is only saying the system is Hibernated. Still looking.

http://www.eightforums.com/general-support/30286-windows-8-went-down-when-resuming-hibernation.html
Relevancy 70.09%

This problem started occurring around the 23rd. When I resume from hibernation, during the Resuming Windows screen, the PC will freeze. When I turn it off and then tell it to continue resuming, it'll resume fine. Does anyone know what caused it to do this in the first place? I have a feeling it was because of one of the programs I installed around the 23rd (either a heavily modded version of Final Fantasy VII or Final Fantasy VIII), but I want to know if it could be something else since I don't want to uninstall these programs.

EDIT: This is for anyone that finds this in the future. I listed this as solved a while ago even though it wasn't technically solved. I just didn't bother with it anymore since updating the drivers didn't do as much good as I originally thought. However, I updated the BIOS and the problem is gone, so the problem is actually solved now.

A:Freezing While Resuming from Hibernation

  
Quote: Originally Posted by Klaw117


This problem started occurring around the 23rd. When I resume from hibernation, during the Resuming Windows screen, the PC will freeze. When I turn it off and then tell it to continue resuming, it'll resume fine. Does anyone know what caused it to do this in the first place? I have a feeling it was because of one of the programs I installed around the 23rd (either a heavily modded version of Final Fantasy VII or Final Fantasy VIII), but I want to know if it could be something else since I don't want to uninstall these programs.


There are several ways to find what the problem is. The best is to go into event viewer (type eventvwr in search). Event viewer (local) and look for errors listed in the last day, week, etc. Then go to the windows log>application tab. Finally the windows Logs>system tabs.

You want to look for all errors (they have red in the left column ).

When you find them you want to look for critical errors that say app hang, app crash, or anything that relates to the problem.

When you find them please note the event ID, and the source codes and tell us what they are.

http://www.sevenforums.com/general-discussion/199500-freezing-while-resuming-hibernation.html
Relevancy 70.09%

Hi,

I don't believe there's a similar thread.
I used to hibernate my Win 7 without problems. But 2 days ago, I noticed that the wireless internet connection became very poor and when I resume Win 7, I get the black screen prompting me to start Win in safe mode or normally. I thought it was a drive issue. I formatted the C drive and installed Win 7 again. The internet is working better, but I still have the same issue with hibernation. No other issues with the performance of the system.

Any suggestions?
Thanks.

http://www.eightforums.com/performance-maintenance/10247-error-when-resuming-hibernation-win-7-a.html
Relevancy 70.09%

I have an XP SP3, completely updated. When I set my computer to hibernate, all goes well (the progress bar appears, and the computer power off) but when I start it up it gives me the following options:

* Continue with system restart.
* Delete restoration data and proceed to system boot menu.

If I select the first one, the computer restarts after about 2 seconds and gives me the same choices again. I am essentially unable to hibernate.

* I scanned my system with Nod32, SpywareDoctor
* I ran Vista on the same system and hibernation worked fine
* I have 2 Gb RAM and I rarely resume heavy-duty apps
* My only recent crash was a problem with my GPU accelerator, but I doubt that has anything to do with my hibernation problem

Does anyone have any suggestion on how to fix this problem?

http://www.techsupportforum.com/forums/f10/problem-when-resuming-from-hibernation-277157.html
Relevancy 70.09%

Recently, my desktop computer has stopped resuming from hibernation. After the "Resuming Windows..." screen, it goes to a blinking hyphen for about 3 seconds, then goes to a completely black screen. No hard drive activity whatsoever. I am unable to continue unless I unplug the computer and delete the restoration data.
 
Speccy in my signature.

http://www.bleepingcomputer.com/forums/t/575464/computer-not-resuming-from-hibernation/