Windows Support Forum

BSOD Occurring Randomly in Windows 7, Suspect Hardware...

Q: BSOD Occurring Randomly in Windows 7, Suspect Hardware...

I built a new system from scratch I hadn't done that since the 's but I'm capable and everything went together just fine i Processor Gigabyte Motherboard gb ram Raedeon vid card the one piece of hardware I already have But I've had nothing but trouble over the last months since I put it together I get constant and RANDOM BSODs Some have occurred during games others web browsing others while I'm afk I just come back to the user select screen and a new mini-dump I have Replaced the RAM sent the motherboard back to Gigabyte and gotten a replacement installed on my SSHD current but also used my TB drive just to test if it was the SSHD--no fix there I've taken out my video card and ran on the onboard--no fix I uninstalled and reinstalled windows in Hardware... Suspect BSOD Randomly Windows Occurring 7, three times The latest with a different fresh copy--and so far the errors seem to have become MORE frequent I am currently running fully updated Windows bit Professional and I'm going to cut this short so I don't get a BSOD that makes me lose all this I NEED help direction sympathy etc Any direction on potential fixes and helping me narrow down the culprit hardware or software is greatly appreciated

Relevancy 100%
Preferred Solution: BSOD Occurring Randomly in Windows 7, Suspect Hardware...

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: BSOD Occurring Randomly in Windows 7, Suspect Hardware...

MSINFO32:
Please go to Start and type in "msinfo32.exe" (without the quotes) and press Enter
Save the report as an .nfo file, then zip up the .nfo file and upload/attach the .zip file with your next post.
Also, save a copy as a .txt file and include it also (it's much more difficult to read, but we have greater success in getting the info from it).

systeminfo:
Please open an elevated (Run as administrator) Command Prompt and type (or copy/paste) "systeminfo.exe >%USERPROFILE%\Desktop\systeminfo.txt" (without the quotes) and press Enter. Then navigate to Desktop to retrieve the syteminfo.txt file. If you have difficulties with making this work, please post back. Then zip up the .txt file and upload/attach the .zip file with your next post.

http://www.sevenforums.com/bsod-help-support/302147-bsod-occurring-randomly-windows-7-suspect-hardware.html
Relevancy 86.86%

Quote:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: 50
BCP1: FFFFF8A018366000
BCP2: 0000000000000000
BCP3: FFFFF80003750079
BCP4: 0000000000000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1



Windows 7 64bit (2 years old installation)
CPU i7 2600
RAM 8GB 1600
GPU Radeon HD 5850 1GB

Thanks.

A:Windows 7 - BSOD occurring randomly

I see both Ad-Aware Antivirus and Microsoft Security Essentials installed. They are likely causing conflicts by trying to access the same system files or use the same system resources simultaneously.
Crashes are pointing to memory problems or driver conflicts.If you are overclocking any hardware, please stop.

Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).


   Warning
Before you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. WARNING: The steps that follow can void your warranty!!!

For Part 3: If You Have Errors: If you swap any memory components, follow these steps for ESD safety:Shut down and turn off your computer.
Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working. If you do not have an anti-static workbench, desk, or pad, you can use your computer tower/case by finding a metal hold in it, such as a drive bay.
Once these steps have been followed, it is safe to remove and replace components within your computer.

An underlying driver may be incompatible\conflicting with your system. Run Driver Verifier to find any issues. To run Driver Verifier, do the following:a. Backup your system and user files
b. Create a system restore point
c. If you do not have a Windows 7 DVD, Create a system repair disc
d. In Windows 7:Click the Start Menu
Type verifier in Search programs and files (do not hit enter)
Right click verifier and click Run as administrator
Put a tick in Create custom settings (for code developers) and click next
Put a tick in Select individual settings from a full list and click next
Set up the individual settings as in the image and click next
Put a tick in Select driver names from a list
Put a tick next to all non-Microsoft drivers.
Click Finish.
Restart your computer.

If Windows cannot start in normal mode with driver verifier running, start in safe mode. If it cannot start in safe mode or normal mode, restore the system restore point using System Restore OPTION TWO.

If you are unable to start Windows with all drivers being verified or if the blue screen crashes fail to create .dmp files, run them in groups of 5 or 10 until you find a group that causes blue screen crashes and stores the blue screen .dmp files. The idea with Verifier is to cause the system to crash, so do the things you normally do that cause crashes. After you have a few crashes, upload the crash reports for us to take a look and try to find patterns.

When you are ready to disable Verifier: Start Menu -> All Programs -> Accessories -> Right click Command Prompt -> Run as administrator -> Type the following command and then Enter:verifier /reset-> Restart your computer.

http://www.sevenforums.com/bsod-help-support/234039-windows-7-bsod-occurring-randomly.html
Relevancy 85.57%

I've been having blue screens with my laptop for a while. They seem to be related to hardware/memory, although running memory tests yield no errors. I've switched out the ram and the hard drive and they continue to occur. I've tried updating a lot of my drivers, which again, does nothing. I can't seem to decipher these crash dumps on my own, so could somebody take a look at them for me?

A:Randomly occurring BSoDs related to hardware

Code:
Host Name: GERALT-PC
OS Name: Microsoft Windows 7 Ultimate
OS Version: 6.1.7601 Service Pack 1 Build 7601
OS Manufacturer: Microsoft Corporation
OS Configuration: Standalone Workstation
OS Build Type: Multiprocessor Free
Registered Owner: Geralt
Registered Organization:
Product ID: 00426-OEM-8992662-00400
Original Install Date: 10/05/2013, 20:16:18
System Boot Time: 01/09/2013, 14:08:24
System Manufacturer: Dell Inc.
System Model: Latitude D630
System Type: x64-based PC
There seems to be a problem with your Windows activation. Please post this report: Activation Issue Posting Instructions

http://www.sevenforums.com/bsod-help-support/303263-randomly-occurring-bsods-related-hardware.html
Relevancy 85.14%

Hello,

I have been getting random BSOD when my computer is running or it is idle, it really seems to have a mind of its own when it happens. I have done a disk check and have run memtest86 (5pass) and it came back with no errors.

The current setup I use is :
Intel Core i5-4670 [email protected] 3.40 GHz
Kingston Hyper x 1600(2x4GB) RAM
Gigabyte GTX 760 OC (Graphics card)
Gigabyte GA-Z87M-D3H (Mobo)
Corsair CX600M
Samsung SSD 250GB 840 EVO (Primary)
Seagate Barracuda 2TB Hard drive

The Samsung SSD is the primary drive I use for Windows and most of my files and the Seagate is used for larger files.

I just built this computer a few weeks ago, all parts are brand new.
I suspect it is a driver problem.

I would appreciate any troubleshooting help I can get on this.

Thank you!

Edit: It appears that I wrote Hello in my title by accident. Sorry.

A:BSOD randomly occurring Windows 7 (64Bit) Hell

Code:
fffff880`009e7838 fffff880`04710c18Unable to load image Rt64win7.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for Rt64win7.sys
*** ERROR: Module load completed but symbols could not be loaded for Rt64win7.sys
Rt64win7+0x1ec18

Code:
RTL8167 Realtek 8167 NT Driver Kernel 10/25/2012 5:20:09 AM
Rt64win7.sys is a Realtek network driver. Yours seems a little outdated.....see if a newer version is available for update:
Realtek

http://www.sevenforums.com/bsod-help-support/317904-bsod-randomly-occurring-windows-7-64bit-hell.html
Relevancy 77.83%

Ran Memtest86+ but no errors were detected; I've also tried updating a few drivers but so far nothing's worked. Sometimes I get the BSOD; other times my computer just restarts randomly. I don't remember installing anything recently that could be the cause of this.

I run Windows 7 Home Premium 64bit SP1. The original OS was Vista; 7 was obtained via an upgrade disk. My system is two years old. Since I don't have the retail disk, I haven't re-installed Windows or anything like that.

Thanks in advance for any help~

A:BSOD occurring randomly

  
Quote: Originally Posted by DestinyTN


Ran Memtest86+ but no errors were detected; I've also tried updating a few drivers but so far nothing's worked. Sometimes I get the BSOD; other times my computer just restarts randomly. I don't remember installing anything recently that could be the cause of this.

I run Windows 7 Home Premium 64bit SP1. The original OS was Vista; 7 was obtained via an upgrade disk. My system is two years old. Since I don't have the retail disk, I haven't re-installed Windows or anything like that.

Thanks in advance for any help~


Old drivers and your Symantec (three years old)

These need updating

Code:
mcdbus.sys 2/24/2009 6:34:07 AM fffff880`05829000 fffff880`05865880 0x0003c880 0x49a3cd1f
point64k.sys 5/8/2009 4:53:29 AM fffff880`0456e000 fffff880`0457c000 0x0000e000 0x4a03f309
nvlddmkm.sys 5/14/2009 4:48:07 PM fffff880`0589a000 fffff880`063a1b00 0x00b07b00 0x4a0c8387
GEARAspiWDM.sys 5/18/2009 8:17:04 AM fffff880`04424000 fffff880`04431000 0x0000d000 0x4a1151c0
nvstor64.sys 6/22/2009 6:23:37 PM fffff880`00c00000 fffff880`00c3e000 0x0003e000 0x4a400469
SYMEVENT64x86.SYS 6/24/2009 4:19:12 PM fffff880`040fc000 fffff880`04132000 0x00036000 0x4a428a40
How To Find Drivers:




Quote:
- search Google for the name of the driver
- compare the Google results with what's installed on your system to figure out which device/program it belongs to
- visit the web site of the manufacturer of the hardware/program to get the latest drivers (DON'T use Windows Update or the Update driver function of Device Manager).
- if there are difficulties in locating them, post back with questions and someone will try and help you locate the appropriate program.


- - The most common drivers are listed on this page: Driver Reference Driver Reference
- - Driver manufacturer links are on this page: Drivers and Downloads
I would remove and replace the Symantec with Microsoft Security Essentials.

http://us.norton.com/support/kb/web_...080710133834EN

Virus, Spyware & Malware Protection | Microsoft Security Essentials

http://www.sevenforums.com/bsod-help-support/190264-bsod-occurring-randomly.html
Relevancy 77.83%

Hello everybody This is my first time posting on this forum and I have almost given up all hope I have got a big issue I have been getting random BSOD and freezes of my system They sometimes occur within minutes of each other they sometimes occur in about - days of each other I have tried all the most common solutions unpluging usb devices using a memory testing USB updating drivers removing drivers installing older drivers and a lot more (AMD) have BSOD everything Randomly I tried occurring I even reinstalled Windows None of these seem to have any effect Now the strange part The system has never BSOD or frozen while gaming I find this really strange because I play really hardware intensive games Like Battlefield and Dayz Bo and more The most common drivers Bluiscreenview is saying caused the crash is ntoskrnl exe and atikmdag exe And yes I have a lot of dumpfiles One thing that keeps coming back are USB and Videocard related drivers I have uploaded all of the dump files to this link https mega co nz WAp AZiD RJJ nP ussLUeZpFJUj-E I hope someone can take a look and maybe figure out wat my problem is Thanks SystemSpecs Randomly occurring BSOD I have tried everything (AMD) AMD FX six core processor GB kingston value ram Asus hd GB gddr graphics card LG monitor x WD gb HDD Corsair CX W power suply

A:Randomly occurring BSOD I have tried everything (AMD)

Hi Luukvideo & Welcome to the forums ^_^,

I have analyzed your dump files from this month, the rest of them are too old and below is a summary of the dump files analyzed :-

Code:
**************************Wed Jul 23 16:19:46.462 2014 (UTC + 5:30)**************************
*** WARNING: Unable to verify timestamp for usbfilter.sys

*** ERROR: Module load completed but symbols could not be loaded for usbfilter.sys

*** WARNING: Unable to verify timestamp for win32k.sys

*** ERROR: Module load completed but symbols could not be loaded for win32k.sys

Probably caused by : usbfilter.sys ( usbfilter+23c6 )

BugCheck 1E, {ffffffffc000001d, fffff801536685b6, ffffd0011c5cc340, 0}
BugCheck Info: KMODE_EXCEPTION_NOT_HANDLED (1e)

BUGCHECK_STR: 0x1E_c000001d

PROCESS_NAME: System

FAILURE_BUCKET_ID: 0x1E_c000001d_BAD_IP_usbfilter+23c6

BIOS Version P1.50

BIOS Release Date 10/02/2013

Manufacturer To Be Filled By O.E.M.

Product Name To Be Filled By O.E.M.

??????????????????????????????????????????????????????????????????????????????????????``
**************************Tue Jul 22 01:20:02.125 2014 (UTC + 5:30)**************************
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+1ecfd )

BugCheck 7A, {fffff6e000d43f00, ffffffffc000003f, 7e12f820, ffffc001a87e0000}
BugCheck Info: KERNEL_DATA_INPAGE_ERROR (7a)

BUGCHECK_STR: 0x7a_c000003f

PROCESS_NAME: svchost.exe

FAILURE_BUCKET_ID: 0x7a_c000003f_nt!_??_::FNODOBFM::_string_

BIOS Version P1.50

BIOS Release Date 10/02/2013

Manufacturer To Be Filled By O.E.M.

Product Name To Be Filled By O.E.M.

??????????????????????????????????????????????????????????????????????????????????????``
**************************Sat Jul 5 15:11:39.383 2014 (UTC + 5:30)**************************
Probably caused by : ntkrnlmp.exe ( nt!KeAccumulateTicks+1f )

BugCheck A, {ffffd89575f21421, d, 1, fffff80350acf34f}
BugCheck Info: IRQL_NOT_LESS_OR_EQUAL (a)

BUGCHECK_STR: AV

DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

PROCESS_NAME: System

FAILURE_BUCKET_ID: AV_nt!KeAccumulateTicks

BIOS Version P1.50

BIOS Release Date 10/02/2013

Manufacturer To Be Filled By O.E.M.

Product Name To Be Filled By O.E.M.

??????????????????????????????????????????????????????????????????????????????????????``
**************************Sat Jul 5 02:53:31.840 2014 (UTC + 5:30)**************************
Probably caused by : dxgmms1.sys ( dxgmms1!VidMmProcessAsyncOperation+1a )

BugCheck 1A, {402, ffffc00079701300, 80000000970c5882, fffffffe00000217}
BugCheck Info: MEMORY_MANAGEMENT (1a)

BUGCHECK_STR: 0x1a_402

PROCESS_NAME: System

FAILURE_BUCKET_ID: 0x1a_402_dxgmms1!VidMmProcessAsyncOperation

BIOS Version P1.50

BIOS Release Date 10/02/2013

Manufacturer To Be Filled By O.E.M.

Product Name To Be Filled By O.E.M.

??????????????????????????????????????????????????????????????????????????????????????``
**************************Wed Jul 2 15:05:10.926 2014 (UTC + 5:30)**************************
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+472e2 )

BugCheck FC, {fffff80186644a50, 8000000004c44163, fffff80186653da0, 0}
BugCheck Info: ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY (fc)

BUGCHECK_STR: 0xFC

DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

PROCESS_NAME: System

FAILURE_BUCKET_ID: 0xFC_nt!_??_::FNODOBFM::_string_

??????????????????????????????????????????????????????????????????????????????????????``


Below is a list of 3rd party drivers present on your system :-

Code:
**************************Wed Jul 23 16:19:46.462 2014 (UTC + 5:30)**************************
bizVSerialNT.sys Tue Sep 9 13:52:49 2008 (48C63259)
LGVirHid.sys ... Read more

http://www.eightforums.com/bsod-crashes-debugging/50575-randomly-occurring-bsod-i-have-tried-everything-amd.html
Relevancy 77.83%

Hi everyone, recently upgraded my hard drive to an SSD and added a new graphics card. Did a fresh windows 7 install and seem to be getting an occasional BSOD.

Have attached zipped diagnostics file.


Cheers,

Allan

A:BSOD, seems to be occurring randomly.

Hello Allan, Stop 0xF4 is a storage related Crash.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck F4, {3, fffffa80041da230, fffffa80041da510, fffff80001dd1460}

----- ETW minidump data unavailable-----
Probably caused by : csrss.exe

Followup: MachineOwner
---------
I would suggest you to update the firmware of your OCZ-AGILITY3.

Let us know the result after doing it.

http://www.sevenforums.com/bsod-help-support/264740-bsod-seems-occurring-randomly.html
Relevancy 77.83%

Hi All my friend has a laptop that has been getting BSOD rather frequently a few every day The laptop is a Sony VAIO US-SVS X-LBOM run Win Home Premium with GB RAM fixed onboard I've asked him to run memtest BSOD occurring Randomly and it has come back clean I'm really hoping this isn't a Randomly occurring BSOD memory issue especially if the RAM is soldered on I've checked for driver updates and that hasn't led me anywhere Any suggestions on what to try next Any and all help is appreciated Here's what WhoCrashed gave This was probably caused by the following module ntoskrnl exe nt x EC Bugcheck code xA x x x xFFFFF FDFF Error IRQL NOT LESS OR EQUAL file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System Bug check description This indicates that Microsoft Windows or a kernel-mode driver accessed paged memory at DISPATCH LEVEL or above This appears to be a typical software driver bug and is not likely to be caused by a hardware problem The crash took place in the Windows kernel Possibly this problem is caused by another driver that cannot be identified at this time

A:Randomly occurring BSOD

Hello and welcome to the seven forum. You have no mini dumps in your log without it there is not much they can do. An BSOD expert will take a look at your file to see if there is anything they can do to help.

http://www.sevenforums.com/bsod-help-support/366320-randomly-occurring-bsod.html
Relevancy 77.83%

? OS - Windows 7 -- x86 (32-bit)
? Age of system - 2 years
? Age of OS installation - 1.5 weeks
? CPU - AMD Sempron 3600+
? Video Card - Onboard
? MotherBoard - Biostar T-Force 6100+ AM2
? Power Supply - brand & wattage - Antec 400watts

The PC listed about I am using as a home file server and ever since I installed Windows 7 I have bee getting these random reboots and since I do not have a monitor, keyboard or mouse attached I cant see anything.The PC just reboots and I get a message saying this computer has recovered from a serious crash and I points me to the mini dumps.

A:BSOD randomly occurring

The error messages are spread all over. Normally this is associated with a hardware issue, but I'm finding that it can also be an incompatibility in newer OS's (such as Win7):

Quote:




Bugcheck code 000000BE
Bugcheck code 0000007F
Bugcheck code 000000D1
Bugcheck code 0000000A
Bugcheck code 00000019
Bugcheck code 00000019
Bugcheck code 000000C2




I would suggest hooking up a monitor, keyboard, and mouse to this so you can monitor it more easily.

The most common drivers cited in the dump files are nvstor32.sys and NETIO.sys - so I'd suggest replacing the current storage and networking drivers. To do this, download the most current version of these drivers, then uninstall the one's on your system. Then install the freshly downloaded one's.

Then, Please remove these older drivers that were loaded at the time of the crash. Don't use Windows Update or the Update drivers function of Device Manager.
Please use the following instructions to locate the most currently available drivers to replace the one's that you uninstall/remove:

Quote:




How To Find Drivers:
- search Google for the name of the driver
- compare the Google results with what's installed on your system to figure out which device/program it belongs to
- visit the web site of the manufacturer of the hardware/program to get the latest drivers (DON'T use Windows Update or the Update driver function of Device Manager).
- if there are difficulties in locating them, post back with questions and someone will try and help you locate the appropriate program.




- some driver links are on this page: http://www.carrona.org/drvrdown.html

Here's the older drivers:

Code:
lmimirr.sys Tue Apr 10 18:32:11 2007 - LogMeIn Mirror Miniport Driver
LMIRfsDriver.sys Mon Jul 14 12:26:22 2008 - LogMeIn Remote File System Driver
RaInfo.sys Fri Jan 04 13:57:12 2008 - LogMeIn/RemotelyAnywhere Kernel Information Provider
But, I'd expect that you're going to have to run Driver Verifier to coax the faulting driver into revealing itself. Please follow these directions:

Quote:




Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

So, I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out.

Reboot into Windows (after the crash) and turn off Driver Verifier by going back in and selecting "Delete existing settings" on the first page, then locate and zip up the memory dump file and upload it with your next post.

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try ... Read more

http://www.techsupportforum.com/forums/f299/bsod-randomly-occurring-453283.html
Relevancy 76.97%

Hi I have a laptop running Windows XP however it seems to be showing the Blue Screen of Death randomly It also seems to do a disk check at start-up sometimes a few years ago the HHD died and it was replaced with a new one According to the crash dump it has something to do with memory corruption but not sure what to do next Laptop Specifications OS Windows XP SP Home Edition [SOLVED] BSOD - Randomly Occurring RAM MB of RAM CPU Intel T GHz MHz Code Debugging Details ------------------ ERROR CODE NTSTATUS x - STATUS WAIT BUGCHECK STR x CUSTOMER CRASH COUNT DEFAULT BUCKET ID DRIVER FAULT PROCESS NAME System LAST CONTROL TRANSFER from fcfb to f c STACK TEXT f ab d fcfb nt KeBugCheckEx x b f ab d c bea bd dc b nt MmInPageKernelStack x f ab da c f c c c [SOLVED] BSOD - Randomly Occurring nt KiInSwapKernelStacks x f ab dac c c nt KeSwapProcessOrStack x f ab ddc bc c f nt PspSystemThreadStartup x [SOLVED] BSOD - Randomly Occurring nt KiThreadStartup x STACK COMMAND kb FOLLOWUP IP nt MmInPageKernelStack fcfb a d b mov cl byte ptr ebp Bh SYMBOL STACK INDEX SYMBOL NAME nt MmInPageKernelStack FOLLOWUP NAME MachineOwner MODULE NAME nt DEBUG FLR IMAGE TIMESTAMP c b IMAGE NAME memory corruption FAILURE BUCKET ID x nt MmInPageKernelStack BUCKET ID x nt MmInPageKernelStack Followup MachineOwner --------- kd gt analyze -v Bugcheck Analysis KERNEL STACK INPAGE ERROR The requested page of kernel data could not be read in Caused by bad block in paging file or disk controller error In the case when the first arguments is or the stack signature in the kernel stack was not found Again bad hardware An I O status of c c STATUS DEVICE DATA ERROR or C AL STATUS DISK OPERATION FAILED normally indicates the data could not be read from the disk due to a bad block Upon reboot autocheck will run and attempt to map out the bad sector If the status is C STATUS IO DEVICE ERROR and the paging file is on a SCSI disk device then the cabling and termination should be checked See the knowledge base article on SCSI termination Arguments Arg page was retrieved from disk Arg value found in stack where signature should be Arg Arg b f cbc address of signature on kernel stack Debugging Details ------------------ ERROR CODE NTSTATUS x - STATUS WAIT BUGCHECK STR x CUSTOMER CRASH COUNT DEFAULT BUCKET ID DRIVER FAULT PROCESS NAME System LAST CONTROL TRANSFER from fcfb to f c STACK TEXT f ab d fcfb nt KeBugCheckEx x b f ab d c bea bd dc b nt MmInPageKernelStack x f ab da c f c c c nt KiInSwapKernelStacks x f ab dac c c nt KeSwapProcessOrStack x f ab ddc bc c f nt PspSystemThreadStartup x nt KiThreadStartup x STACK COMMAND kb FOLLOWUP IP nt MmInPageKernelStack fcfb a d b mov cl byte ptr ebp Bh SYMBOL STACK INDEX SYMBOL NAME nt MmInPageKernelStack FOLLOWUP NAME MachineOwner MODULE NAME nt DEBUG FLR IMAGE TIMESTAMP c b IMAGE NAME memory corruption FAILURE BUCKET ID x nt MmInPageKernelStack BUCKET ID x nt MmInPageKernelStack Followup MachineOwner Any Suggestions Thanks mme

A:[SOLVED] BSOD - Randomly Occurring

Hi

From the analysis of the minidump you provided it seems there might be a problem with your hard drive.

Therefore run the hard drive diagnostic tool for your make of hard drive. A list of Hard Drive manufacturers and the links to their Diagnostics tools can be found here. Download the ZIP file, extract the ISO and write it to CD using a program like ImgBurn.
Once written to CD, boot your PC with the CD and run the Advanced or Extended test.

Once that is done check your hard drive for any errors with chkdsk. To do this go to Start -> Run -> type chkdsk c: /r -> click Ok . When asked if you want to force a dismount say No. When asked to schedule the check at the next startup say Yes. Restart your PC to allow chkdsk to run.

http://www.techsupportforum.com/forums/f10/solved-bsod-randomly-occurring-551015.html
Relevancy 76.97%

In the last days I've experienced BSOD constantly I cannot figure out what is causing it and I'm in need of someone's help who understands these things My PC specs HP with I processor gb ram I added additional gb ram myself almost years ago when I bought the PC I've had BSOD over the last year but never more than a one off occurring constantly and BSOD randomly! or that doing a windows update wouldn't solve This time is different and errors are coming in all shapes and sizes from kernals to winsys exe errors Yesterday windows told me that I had a critical error that was a first I've noticed that BSOD occurring constantly and randomly! a few of my windows updates have failed this time too and they're not even installing manually don't know if this is related I've attached the dmp files to this post the event log txt document is over mb so I can't upload I've ran memtest as seen in another thread and it isn't reporting any issues I'm at a complete loss as I can't use BSOD occurring constantly and randomly! the PC at all just now which is going to affect my business

A:BSOD occurring constantly and randomly!

Hi Welcome to Seven Forums.
To help us help you would you please add your systems specs? Here's how: System Info - See Your System Specs
Under System Manufacturer/Model Number add whether it is a desktop or laptop and whether self built.

Log in to Seven Forums and you will be able to transfer the info directly to the specs page in your profile from within the System Info app.
After doing this your specs will be available in each of your posts. Click on mine in the lower left to see how it should look.

Could you upload the event log text file to MediaFire and link it here in a post? Thanks.

http://www.sevenforums.com/bsod-help-support/282666-bsod-occurring-constantly-randomly.html
Relevancy 76.97%

Hello A few days playing - occurring BSOD Randomly WoW while ago my system was running fine until one of the caps on my old video card busted a Geforce GT I replaced it with a Geforce GT don't want to spend money on a decent one before I replace the ancient MB I use At first I followed the instructions from the manufacturer to uninstall the old drivers reboot and install the new ones The thing is that since then I've been welcomed BSOD - Randomly occurring while playing WoW with a number of random crashes occuring both BSOD - Randomly occurring while playing WoW within the game and outside as BSODs I figured it would be some problem with the vga drivers so I tried everything from BSOD - Randomly occurring while playing WoW older versions of the drivers to letting windows wizard do the update for me and back to reinstalling the newest ones from the manufacturer Just to be sure this wasn't a memory issue I ran a memtest passes and no errors I updated the chipset drivers and windows wouldn't boot at all I had to restore a previous configuration to be able to turn on my machine I'm really out of ideas as to what is the cause of this problem I'm using Vista Home Premium bit retail version My hardware is about years old and I'm using this OS since january last year One more thing is that I could only get Perfmon and BSOD Dump amp System File Collection to collect info in portuguese since that's the language of my OS If that's no good and there's a way to extract info in a more suitable language I'll be posting attaching a new report asap Thanks in advance

A:BSOD - Randomly occurring while playing WoW

Hello and welcome to the forum.

I will forward your post to a member who knows about the BSOD.

Tom

http://www.vistax64.com/crashes-debugging/288172-bsod-randomly-occurring-while-playing-wow.html
Relevancy 76.97%

This computer's first BSOD was a few months ago, but they have been getting more frequent, along with random freezes.

They usually come in succession, so I will get 2 to 3 BSODs in an hour and then none for a few days.

Thanks.
Windows 7 Profession 64 bit, full retail version
Windows Vista was originally installed on this computer, and it is partitioned into this operating system and Windows 7 Home Premium 64 bit, both of which have BSODs.
The computer is about 3 years old, and I installed the operating system about a year ago.

A:Randomly occurring BSOD, becoming more frequent

Hello Rupert Connors & welcome,
Nothing definitive was gleaned from your analysis.
Please run these two tests to verify your memory and find which driver may be causing the problem.

If you are overclocking anything reset to default before running these tests.
In other words STOP!!!
1-Memtest.





Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.



RAM - Test with Memtest86+

2-Driver verifier






Quote:
I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.


Driver Verifier - Enable and Disable
Further Reading
Using Driver Verifier to identify issues with Windows drivers for advanced users

http://www.sevenforums.com/bsod-help-support/202852-randomly-occurring-bsod-becoming-more-frequent.html
Relevancy 76.97%

Hi

I have BSOD randomly occurring, seems to be unrelated to the software running on the computer. I've read BCcode 124 is a bit of a tricky error to analyze. I do however hope you're able to help. I'm also having difficulties upgrading with the SP1 update (KB976932 error 0x80070490). I know this isn't the right forum for that issue, I'm only mentioning in case it may be related . I have tried every tutorial I've found online (for both issues), and I can't figure it out. Please see the attached file for mini-dumps etc.

Help is much appreciated

Thoord

A:BSOD randomly occurring, BCcode 124

A "stop 0x124" is fundamentally different to many other types of bluescreens because it stems from a hardware complaint. Stop 0x124 minidumps contain very little practical information, and it is therefore necessary to approach the problem as a case of hardware in an unknown state of distress. You can read more on this error and what to try here... Stop 0x124 - what it means and what to try: Stop 124 - What it means and what to try

Code:
Microsoft (R) Windows Debugger Version 6.2.9200.20512 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\USER\Downloads\Thoord\SF_05-11-2013\110513-15802-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (24 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.17273.amd64fre.win7_gdr.130318-1532
Machine Name:
Kernel base = 0xfffff800`02e61000 PsLoadedModuleList = 0xfffff800`0309de70
Debug session time: Tue Nov 5 15:33:27.457 2013 (UTC + 6:00)
System Uptime: 0 days 0:00:10.566
Loading Kernel Symbols
..................................................
Loading User Symbols
Mini Kernel Dump does not contain unloaded driver list
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 124, {0, fffffa8027b7b8f8, 0, 0}

Probably caused by : GenuineIntel

Followup: MachineOwner
---------

23: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa8027b7b8f8, Address of the WHEA_ERROR_RECORD structure.
Arg3: 0000000000000000, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000000000000, Low order 32-bits of the MCi_STATUS value.

Debugging Details:
------------------


BUGCHECK_STR: 0x124_GenuineIntel

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

PROCESS_NAME: System

CURRENT_IRQL: 0

STACK_TEXT:
fffff880`03b6f6f0 fffff800`0311a979 : fffffa80`27b7b8d0 fffffa80`25d01040 fffff8a0`00252a70 00000000`00000001 : nt!WheapCreateLiveTriageDump+0x6c
fffff880`03b6fc10 fffff800`02ffc677 : fffffa80`27b7b8d0 fffff800`030755f8 fffffa80`25d01040 fffff800`030755f8 : nt!WheapCreateTriageDumpFromPreviousSession+0x49
fffff880`03b6fc40 fffff800`02f64c85 : fffff800`030d7380 fffffa80`274f6c28 fffff8a0`002529e8 fffffa80`25d01040 : nt!WheapProcessWorkQueueItem+0x57
fffff880`03b6fc80 fffff800`02eddb21 : fffff800`032f4800 fffff800`02f64c60 fffffa80`25d01040 00000000`00000000 : nt!WheapWorkQueueWorkerRoutine+0x25
fffff880`03b6fcb0 fffff800`0316f47a : 00000000`00000000 fffffa80`25d01040 00000000`00000080 fffffa80`25c619e0 : nt!ExpWorkerThread+0x111
fffff880`03b6fd40 fffff800`02eaeda6 : fffff880`03a8f180 fffffa80`25d01040 fffff880`03a9a4c0 00000000`00000000 : nt!PspSystemThreadStartup+0x5a
fffff880`03b6fd80 000000... Read more

http://www.sevenforums.com/bsod-help-support/310747-bsod-randomly-occurring-bccode-124-a.html
Relevancy 76.97%

BSOD just started randomly occurring on my 4 year old Lenovo B575 running windows 7 64bit. Attached is the .zip file.
Thanking you in advance for any help you would provide,
Dave

Last error message:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 124
BCP1: 0000000000000000
BCP2: FFFFFA8003F60038
BCP3: 00000000B6000000
BCP4: 0000000000010015
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\032215-47143-01.dmp
C:\Users\Owner\AppData\Local\Temp\WER-111057-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\windows\system32\en-US\erofflps.txt

A:BSOD just started randomly occurring

You are receiving a Stop 124 which usually means a hardware problem. All your dumps are the same and point to chrome.exe, but I doubt thats the real issue.


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 124, {0, fffffa800402d1d8, b6000000, 10015}

Probably caused by : AuthenticAMD

Followup: MachineOwner
---------

Processing initial command '!analyze -v;r;kv;lmtn;lmtsmn;.bugcheck'
1: kd> !analyze -v;r;kv;lmtn;lmtsmn;.bugcheck
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa800402d1d8, Address of the WHEA_ERROR_RECORD structure.
Arg3: 00000000b6000000, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000000010015, Low order 32-bits of the MCi_STATUS value.

Try troubleshooting through the steps in the threads below. Report back with the results. Read all directions very carefully and perform every step exactly as stated. If you have questions, feel free to ask

BSOD chrome.exe bugcheck 124 repeatingly.

Stop 0x124 - what it means and what to try

http://www.sevenforums.com/bsod-help-support/364913-bsod-just-started-randomly-occurring.html
Relevancy 76.97%

I have a Gateway desktop running Vista bit which has been experiencing random BSOD s The errors occur randomly no specific type of use or programs seem to trigger them and can happen minutes after boot or after several hours The PC had been factory software reset in August for similar issues they stopped then started again recently All possible driver and BIOS updates have been applied and I have run extensive hardware diagnostics but there have been no failures I have also disabled all startup items and non-microsoft services As far as I have observed the PC has crashed in all modes except Safe without networking Any help or suggestions would be greatly appreciated this has become very frustrating BSOD Info Dump File Mini - dmp Crash Time PM Bug Check String PAGE FAULT IN NONPAGED AREA Bug Check Code x Parameter x b ac Parameter x Parameter x BSOD's occurring Multiple randomly various a bb Parameter x Caused By Driver ntkrnlpa exe Caused By Address ntkrnlpa exe File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version vistasp gdr - Processor Multiple various BSOD's occurring randomly -bit Crash Address ntkrnlpa exe Stack Address ntkrnlpa exe ddd Stack Address Ntfs sys bb Stack Address ntkrnlpa exe Computer Name Full Path C Windows Minidump Mini - dmp Processors Count Major Version Minor Version Dump File Size Dump File Mini - dmp Multiple various BSOD's occurring randomly Crash Time PM Bug Check String DRIVER CORRUPTED EXPOOL Bug Check Code x c Parameter x Parameter x Parameter x Parameter x f a Caused By Driver ntkrnlpa exe Caused By Address ntkrnlpa exe dfd File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version vistasp gdr - Processor -bit Crash Address ntkrnlpa exe dfd Stack Address ntkrnlpa exe ee b Stack Address ntkrnlpa exe ed Stack Address ntkrnlpa exe b d Computer Name Full Path C Windows Minidump Mini - dmp Processors Count Major Version Minor Version Dump File Size Dump File Mini - dmp Crash Time PM Bug Check String KERNEL MODE EXCEPTION NOT HANDLED Bug Check Code x e Parameter xc Parameter x d fef Parameter x c bac Parameter x Caused By Driver win k sys Caused By Address win k sys c fef File Description Multi-User Win Driver Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version vista rtm - Processor -bit Crash Address win k sys c fef Stack Address win k sys c Stack Address win k sys c Stack Address win k sys a f Computer Name Full Path C Windows Minidump Mini - dmp Processors Count Major Version Minor Version Dump File Size Dump File Mini - dmp Crash Time AM Bug Check String BAD POOL CALLER Bug Check Code x c Parameter x Parameter x c Parameter x Parameter x Caused By Driver ntkrnlpa exe Caused By Address ntkrnlpa exe cdb f File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version vistasp gdr - Processor -bit Crash Address ntkrnlpa exe cdb f Stack Address ntkrnlpa exe eb a Stack Address ntkrnlpa exe d f Stack Address ntkrnlpa exe ed a Computer Name Full Path C Windows Minidump Mini - dmp Processors Count Major Version Minor Version Dump File Size

A:Multiple various BSOD's occurring randomly

As far as I have observed the PC has crashed in all modes except Safe without networking.That tends to point the finger at a networking component. Let's get some information to work with ... Please follow the instructions: BSOD Posting Instructions: Windows 7 - Vista... with one exception in the following line:"4. Zip up the entire output folder + PERFMON and attach the zip file to your next post."The BC forums will allow a total attachment size of only 512 kb (and what you need to attach will exceed this limit). Please upload the zip file to a file sharing website of your choice and and post a link to it in this thread so that we can access your uploaded zip file. I will have a look at the contained information and see if I can shed some light on your BSOD issue.See the suggestions in the following links for recommendations on file sharing websites:http://lifehacker.com/388284/best-online-file-sharing-serviceshttp://www.hongkiat.com/blog/15-great-free-online-file-sharing-alternatives/http://www.smashingapps.com/2008/08/28/5-best-free-file-hosting-services-to-store-your-files.html Please Publish a Snapshot using Speccy, and post a link to it in this thread.It is a convenient and accurate way of providing us with details of your computer specifications.

http://www.bleepingcomputer.com/forums/t/430183/multiple-various-bsods-occurring-randomly/
Relevancy 76.97%

I can't think of any recent programs or updates I've downloaded that seem to be linked to this BSOD. As said in the subject it seems to be happening randomly. My laptop is normally very healthy, CPU runs very low, etc.

A:BSOD occurring seemingly randomly.

Welcome to SevenForums.

Code:
STOP 0x0000007A: KERNEL_DATA_INPAGE_ERROR
Usual causes: Memory, Paging file corruption, File system, Hard drive, Cabling,
Virus infection, Improperly seated cards, BIOS, Bad motherboard, Missing Service
Pack
BugCheck 7A, {fffff8a006fa9b50, ffffffffc0000185, 135168860, fffff96000161db0}
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : win32k.sys ( win32k+161db0 )

Code:
Start Menu\Programs\AVG Public:Start Menu\Programs\AVG Public
AVG is often a cause of BSOD-s, please uninstall it and replace with Microsoft security essentials at least to test.AVG | Download tools and utilities
Run these tools and delete anything they find: Anti-rootkit utility TDSSKiller
ESET online scanner:Free Online Virus Scanner | ESET
Recommended antivirus program for Windows 7 based on stability compared to others:-
Microsoft Security Essentials - Free Antivirus for Windows
Microsoft Security Essentials Download | Free Spyware Protection
Malwarebytes - The Free version
Good and Free system security combination.
Do not start the free trial of Malware Bytes; remember to deselect that option when prompted.

Run a full scan with both (separately) once downloaded, installed and updated.

System Optimisers
Please remove the following software

Code:
Start Menu\Programs\AVG PC Tuneup 2011 Public:Start Menu\Programs\AVG PC Tuneup 2011 Public
Start Menu\Programs\AVG PC Tuneup 2011\Utilities Public:Start Menu\Programs\AVG PC Tuneup 2011\Utilities Public
This software is a known cause of BSOD's. The windows 7 operating system does not require these registry cleaning software. They often tune-down rather than tune-up and can wreck the OS beyond repair. Microsoft have improved Windows 7 significantly and it is much better at organising and optimising itself than its predecessors. Check this, this and this thread for evidence.

If you feel the need to use a registry cleaning or optimisation software, most of us recommend the use of CCleaner but make sure you back up the registry before making letting ccleaner delete anything.

Run the System File Checker that scans the of all protected Windows 7 system files and replaces incorrect corrupted, changed/modified, or damaged versions with the correct versions if possible:SFC /SCANNOW Command - System File Checker
Run Disk Check on your hard disk for file system errors and bad sectors on it:Disk Check
Free up the start-up, nothing except the antivirus is usually needed:Startup Programs - Change
Troubleshoot Application Conflicts by Performing a Clean Startup
Install all updates, including service pack 1:

Code:
Version 6.1.7600 Build 7600
Learn how to install Windows 7 Service Pack 1 (SP1)
Check for a BIOS update:

Code:
BIOS Version/Date Hewlett-Packard F.43, 7/9/2009
Let us know the results, good luck

http://www.sevenforums.com/bsod-help-support/264177-bsod-occurring-seemingly-randomly.html
Relevancy 76.54%

Hello all I've recently started to experience a BSOD problem I cannot quite put my finger occurring, no hardware. new - Random BSOD HTPC on It Random BSOD occurring, HTPC - no new hardware. does not save a log even though I have it set to save in Minidump I have not changed or added any hardware or software I completely wiped Windows and started over from scratch using the most up to date drivers However they're still occurring I've restored my BIOS settings to all default settings I am thinking it was a Hard drive issues I've ran CHKDSK all both drives - I know my Windows drive was clean I was not around to see the completion of of my slave drive - I was running CHKDSK via Safemode and came back to a BSOD I've attached a administrator Eventlog but am unable to make much sense of it The last BSOD I saw read this Code KERNEL DATA INAPGE ERROR STOP X A XFFFFFF FC C XFFFFFFFFC E X E XFFFFF NTFS SYS - Address FFFFF base at FFFFF Datestamp ce f I've ran Memory test already no errors where found The next step I am going to try is too unplug my Slave drive and see what happens without it I've already re-seated both drives and memory sticks Any help and suggestions would be much appreciated Thanks EDIT Attached diagnostic tool zip

A:Random BSOD occurring, HTPC - no new hardware.

I've started to get BSOD when loading TouchBios, an application included with my Gigabyte mother board. These crashes have saved in /Minidump, unlike the others. I'm not sure if they're related in anyway.

Thanks.

http://www.sevenforums.com/bsod-help-support/249814-random-bsod-occurring-htpc-no-new-hardware.html
Relevancy 76.11%

Hi there.

I've recently been getting the famed BSOD, and I'm noticing that it occurs at very random times. I use Microsoft office(excel in particular) quite extensively and almost always have Google docs (spreadsheets), Youtube, Facebook and Gmail open in my Chrome browser, although I'm not sure if it has anything to do with the crashes. I don't have any external devices attached to the computer apart from a Razer mouse.
I usually encounter BSOD maybe once a day, twice on a bad one.
Any help would be appreciated!

A:BSOD occurring randomly, often while Chrome/MS Office in use.

Welcome to the forum.

Seems like the BSOD's were caused by "PC Tools Internet Security". Recommend you remove it and use Microsoft Security Essentials.

Recommended from a strict BSOD perspective, compatibility & stability compared to other security software:

Microsoft Security Essentials - Free Antivirus for Windows

Malwarebytes - Free

Good and Free system security combination.

Code:
Microsoft (R) Windows Debugger Version 6.2.9200.20512 X86
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\Usra\Downloads\aarontsang\SF_14-01-2014\011414-28579-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.18247.amd64fre.win7sp1_gdr.130828-1532
Machine Name:
Kernel base = 0xfffff800`02e60000 PsLoadedModuleList = 0xfffff800`030a36d0
Debug session time: Wed Jan 15 07:28:08.240 2014 (UTC + 6:00)
System Uptime: 0 days 20:07:51.019
Loading Kernel Symbols
...............................................................
................................................................
................................................
Loading User Symbols
Loading unloaded module list
..........
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 3B, {c0000005, fffff880048c5883, fffff8800e5e0120, 0}

*** WARNING: Unable to verify timestamp for PctWfpFilter64.sys
*** ERROR: Module load completed but symbols could not be loaded for PctWfpFilter64.sys
Probably caused by : PctWfpFilter64.sys ( PctWfpFilter64+2883 )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff880048c5883, Address of the instruction which caused the bugcheck
Arg3: fffff8800e5e0120, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.

Debugging Details:
------------------


EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

FAULTING_IP:
PctWfpFilter64+2883
fffff880`048c5883 f30f6f03 movdqu xmm0,xmmword ptr [rbx]

CONTEXT: fffff8800e5e0120 -- (.cxr 0xfffff8800e5e0120)
rax=992000014848e801 rbx=ffff00000b5bb191 rcx=fffff6800005add8
rdx=71f000014cd8c867 rsi=0000000000000000 rdi=fffff8800e5e1390
rip=fffff880048c5883 rsp=fffff8800e5e0b00 rbp=000000000000de6b
r8=00000000ffffffff r9=0000000000000000 r10=fffff880048fad20
r11=fffff8800e5e0be8 r12=00000000000000ff r13=0000000000000e54
r14=000000000000c30f r15=0000000000000000
iopl=0 nv up ei pl nz na pe nc
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010202
PctWfpFilter64+0x2883:
fffff880`048c5883 f30f6f03 movdqu xmm0,xmmword ptr [rbx] ds:002b:ffff0000`0b5bb191=???????... Read more

http://www.sevenforums.com/bsod-help-support/318445-bsod-occurring-randomly-often-while-chrome-ms-office-use.html
Relevancy 76.11%

Hello people I really need help with this problem which I'm unable to do myself Problem is My computer Bluescreens very randomly without giving much information on what caused it I can sometimes go error different BSOD codes Very randomly occurring with a full day without a single bsod and somedays I get within mins Only connection I've maybe figured out is that all these bsod's seem to happen when my comp is connected to internet and either downloading something or sending something Like Very randomly occurring BSOD with different error codes when I log into games and try to connect into a server i get bsod or if I don't I can play that game for hours only to get the bsod when I quit game and return to desktop Sometimes using chrome just to browse web or switching tracks on spotify can cause issues aswell My computer was first bought and build around with some upgrades such as more ram and new GPU I've ran this comp with a stable OC of and never before having any problems with either my system heating up or freezing Now I've returned to stock clocks to rule out any unstable oc I'v done pretty much all i know about debugging and trying to figure out which programs drivers hardware are causing my system to be so randomly unstable My head keeps telling me this is some driver related cause it started what seems to be quot all of a sudden quot Things I've done Return stock OC Ran memtest for passes errors Ran Prime for hours errors and temps maxed at c Bought a new set of ram bought a new ssd samsung installed windows bios reset reseat re cable everything but the cpu didn't have thermal paste to do this chkdsk no issues sfc scannow no issues So I'm pretty much counting on you guys to join me on this All dumps and info can be found on attachment

A:Very randomly occurring BSOD with different error codes

Hi,

Issue is RAM not configured well in bios and/or overclock. Please attach a screenshot of CPU-Z first tab, one of Memory tab and one each for each stick of RAM of the SPD tab.

http://www.eightforums.com/bsod-crashes-debugging/41390-very-randomly-occurring-bsod-different-error-codes.html
Relevancy 76.11%

Hi I've had my current computer for about a year now and for the first time yesterday a BSOD appeared 0x0000003B) (STOP: Randomly BSOD occurring It seemed to happen randomly whilst I was waiting for a game I play The Sims to update Other than the update window nothing else was running except for background applications It came up with the following error SYSTEM SERVICE EXCEPTION STOP x B x C D xFFFFF B F xFFFFF A A x Underneath this code a file named quot mfefirek sys quot is mentioned I'm not sure if this means anything I didn't have my computer set to make small memory dump files at the time so I could Randomly occurring BSOD (STOP: 0x0000003B) only find one DMP file in my Windows Minidump folder and I'm not sure if it will be of any use to you as I can't tell what Randomly occurring BSOD (STOP: 0x0000003B) it actually contains However I've attached it anyway I have also attached a zip file containing the results of the SF Diagnostic Tool Since the first BSOD at pm last night it's am now I haven't had Randomly occurring BSOD (STOP: 0x0000003B) another one But I have a feeling that whatever problem there is still hasn't been fixed Any advice is appreciated Thanks P S I'm a bit of a noob with computers so if anyone has a solution I'd appreciate it in layman's terms if possible

A:Randomly occurring BSOD (STOP: 0x0000003B)

  
Quote: Originally Posted by jadeisallama


Hi,
Underneath this code, a file named "mfefirek.sys" is mentioned. I'm not sure if this means anything.


It means McAfee Driver Reference Table - mfefirek.sys

You are the victim of the most frequent BSOD causer on earth.

Get rid of McAfee using McAfee Removal Tool, and then install Microsoft Security Essentials - Microsoft Windows.

Report us back with the results. Hopefully there will be no more BSODs.

http://www.sevenforums.com/bsod-help-support/262055-randomly-occurring-bsod-stop-0x0000003b.html
Relevancy 76.11%

Getting these new BSOD errors throughout the day:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033

Additional information about the problem:
BCCode: 18
BCP1: FFFFFA8006A5F350
BCP2: FFFFFA8009C33170
BCP3: 0000000000000001
BCP4: 00FF000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

http://www.sevenforums.com/bsod-help-support/402131-bsod-reference-pointer-randomly-occurring.html
Relevancy 76.11%

Good day to you, gentlemen!

I've been having an agonizing problem for months now, and I just can't seem to find the source of the problem on my own, so I am asking for your help.

I've been getting randomly occurring BSODs for a while now(0x0000007F). I removed all the dust from my PC, checked cable connections, removed and reinserted RAM sticks, updated my VGA drivers and had my RAM checked by memtest, but it hasn't picked up any errors after 7+ passes.
If you need to know anything else, I'll gladly provide you with further information.
Thank you for taking the time to help, I'd be eternally grateful if somebody could figure it out for me.

A:Randomly occurring BSOD, error 0x0000007F

Please post the following here before we begin: Windows Genuine and Activation Issue Posting Instructions

http://www.sevenforums.com/bsod-help-support/285974-randomly-occurring-bsod-error-0x0000007f.html
Relevancy 76.11%

Hello there. I'm running Win 7 Home Premium 64bit
I've been having trouble the last couple weeks with my computer randomly blue screening either when I leave it alone for a while (30-60 min) or while I'm playing various games. The screen will freeze, the sound will start repeating/buzzing and then the BSOD appears.

DM Log Collector files

A:BSOD - KERNEL_DATA_INPAGE_ERROR 0x0000007A - Randomly occurring

Hey there! Dumps aren't enabled. Enable them and post the new BSOD.

Dump Files - Configure Windows to Create on BSOD

http://www.sevenforums.com/bsod-help-support/371647-bsod-kernel_data_inpage_error-0x0000007a-randomly-occurring.html
Relevancy 76.11%

System was manufactured this March. Computer was received 6 days ago.

Restored operating system to factory settings multiple times. It was restored 6 hours before this latest crash.

I was watching a youtube video while installing Visual Studio when this latest crash occurred.

Windows Ultimate 64-bit. Upgraded from Windows Home Premium. Full Retail.
Lenovo ThinkPad W520
Intel Core i7-2860QM
16GB
NVidia Quadro 2000M
Intel 160GB X25 SSD (2 in RAID 0)

Output from the system file collection app and the system health report is attached as zip.

Thanks in advance for any assistance.

Update 3/24: No errors from Memtest.

A:BSOD Randomly Occurring, New Lenovo W520

Problem Devices:
Code:
Cisco Systems VPN Adapter for 64-bit Windows ROOT\NET\0000 This device is disabled.

Security Software:
Code:
vipappservice.exe c:\program files (x86)\symantec\vip access client\vipappservice.exe 8356 8 200 1380 3/23/2012 9:40 PM 2.0.2.140 80.61 KB (82,544 bytes) 6/30/2011 1:07 AM
vipuimanager.exe c:\program files (x86)\symantec\vip access client\vipuimanager.exe 6196 8 200 1380 3/23/2012 9:46 PM 2.0.2.140 2.08 MB (2,185,832 bytes) 6/30/2011 1:07 AM
avastsvc.exe c:\program files\avast software\avast\avastsvc.exe 2096 8 200 1380 3/23/2012 9:38 PM 7.0.1426.0 43.72 KB (44,768 bytes) 3/23/2012 7:13 PM
avastui.exe c:\program files\avast software\avast\avastui.exe 1744 8 200 1380 3/23/2012 9:38 PM 7.0.1426.0 4.05 MB (4,241,512 bytes) 3/23/2012 7:13 PM

Possible out of date drivers:
Code:
dne64x fffff880`04c60000 fffff880`04c8c000 Mon Nov 10 18:01:24 2008 (4918d964) 000359da dne64x.sys
LenovoRd fffff880`027cb000 fffff880`027e7d00 Mon May 11 03:33:56 2009 (4a07f104) 000271d2 LenovoRd.sys
dne64x.sys
LenovoRd.sys



Code:
Loading Dump File [D:\Kingston\BSODDmpFiles\AfraidOfDecaf\Windows_NT6_BSOD_jcgriff2\032312-13166-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17727.amd64fre.win7sp1_gdr.111118-2330
Machine Name:
Kernel base = 0xfffff800`02e5a000 PsLoadedModuleList = 0xfffff800`0309e650
Debug session time: Fri Mar 23 19:35:25.355 2012 (UTC - 6:00)
System Uptime: 0 days 0:28:46.214
Loading Kernel Symbols
...............................................................
................................................................
..............................................................
Loading User Symbols
Loading unloaded module list
.........
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 3B, {c0000005, fffff88007e661c0, fffff880247456c0, 0}

Probably caused by : ntkrnlmp.exe ( nt!KiSystemServiceHandler+7c )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff88007e661c0, Address of the instruction which caused the bugcheck
Arg3: fffff880247456c0, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.

Debugging Details:
------------------


EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

FAULTING_IP:
+0
fffff880`07e661c0 0000 add byte ptr [rax],al

CONTEXT: fffff880247456c0 -- (.cxr 0xfffff880247456c0)
rax=0000000000000000 rbx=0000000000000000 rcx=0000f88003e841ba
rdx=fffffa8014b664a1 rsi=0000000000000008 rdi=0000000000000000
rip=fffff88007e661c0 rsp=fffff880247460a8 rbp=fffff88024746b60
r8=fffffa8014b664a0 r9=000... Read more

http://www.sevenforums.com/bsod-help-support/220840-bsod-randomly-occurring-new-lenovo-w520.html
Relevancy 76.11%

Hi!

I have had 2 blue screens in about ~one month time. I'm not sure why it is occurring, my computer runs perfect still -> Boots up and does everything I usually do. But just now it blue screened and I did nothing out of the ordinary. I included the crash files if it helps.

Thank you in advance

A:BSOD occurring randomly. Happened twice in one month.

Stop 0x3B BSODs are most unavoidable with systems not having Service pack 1.

Install Service pack 1 and all other windows updates. Otherwise the system will remain vulnerable to threats including BSODs.

Code:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.17273.amd64fre.win7_gdr.130318-1532
Learn how to install Windows 7 Service Pack 1 (SP1)
Service Pack and Update Center - Microsoft Windows

Let us know for any further BSOD after installing Service pack 1.
___________________________________________

Code:
BugCheck 3B, {c0000005, fffff96000186483, fffff88008cd9030, 0}

Probably caused by : win32k.sys ( win32k!HmgLockEx+a3 )

Followup: MachineOwner
---------

http://www.sevenforums.com/bsod-help-support/362139-bsod-occurring-randomly-happened-twice-one-month.html
Relevancy 75.68%

Hi This is my first time posting so sorry if my thread title is awful but really didn't know how to explain my system problems I've been using these forums for a long time with previous issues and have tried so much with my current problems to fix it myself but my PC knowledge experience has a limit I am getting completely random BSOD type shutdowns without the blue screen appearing with any messages this can happen during a virus scan MSE or during malwarebytes premium just no message BSOD BSOD restarting. randomly occurring but scan happens during sfc scannow randomly IE or Chrome can crash not respond of which sometimes can lead to a BSOD type crash it's happened whilst installing Windows updates or searching for any new updates A few fresh installs BSOD occurring randomly but no BSOD message just restarting. ago I was getting these problems WITH BSOD messages and I thought it might be bad memory so I ran memtest for passes on each stick in each slot one was bad so I have since purchased new BSOD occurring randomly but no BSOD message just restarting. RAM and a new SSD which was my reward for finding a problem out all by myself I got problems again still so I completed another fresh install and installed the basics as a test latest gfx drivers motherboard drivers then struggled with windows updates any that failed repeatedly I downloaded and installed from MS website then my antivirus software and I'm still getting random BSODs and IE Chrome crashing ALOT I should add I followed the steps for my SSDs in this link Solid State Drive SSD Tweaks for Windows Not sure if that's any help I have a nasty gut feeling it's a dodgy PSU Mobo but my wallet is hoping it really isn't if it is the case I'd rather the PROs tell me straight over randomly searching websites for answers Many Thanks

A:BSOD occurring randomly but no BSOD message just restarting.

  
Quote: Originally Posted by alexlewis


I am getting completely random BSOD type shutdowns without the blue screen appearing with any messages,


So no BSOD is appearing? There is no crash dump recorded, too. That makes it sense that you are not having a BSOD issue, but random shutdown. Which may be caused by anything and everything.

First make it sure that there is no problem with the power connection and power chords.

Next make it sure that the PSU is working properly.

Next, monitor the temperature. Publish a Speccy snapshot after a couple of hours of normal usage: Speccy - Publish Snapshot of your System Specs .

If all is OK upto this point, the next thing to do is a complete dismantle, dusting and re-seating the computer.

Do upto this point. Report back the situation. If nothing is changed then more steps will be needed.

http://www.sevenforums.com/bsod-help-support/347060-bsod-occurring-randomly-but-no-bsod-message-just-restarting.html
Relevancy 75.68%

I just finished a desktop build and have been getting a random BSOD I custom occurring BSOD on new build install Randomly purchased Randomly occurring BSOD on new install custom build a driver program thinking it would do a better job than I did manually DriverDoc It seemed fine for a couple of days after running that program but I ended up having BSOD events in the last two days Both were during the night when the computer was asleep and not being used I am not sure if I had muliple problems and DriverDoc solved most but not all or what I have run memtest and the memory showed no errors in passes I also ran Bluescreenview and all dumps involved ntoskrnl exe which from what I understand is fairly non-specific since all it tells me is it involves the kernel Any help would be appreciated Oh BTW when I first started the build I had just finished installing the OS and the motherboard would no longer boot into bios so I returned the motherboard and replaced it with the same model I do not know if something could have messed up the install as I did not start all over again I assume all of the specs I entered will be available for this post If not please let me know This is my first time posting to this forum

A:Randomly occurring BSOD on new install custom build

looks like you are correct there, just back up your files and do a clean install.

http://www.sevenforums.com/bsod-help-support/378051-randomly-occurring-bsod-new-install-custom-build.html
Relevancy 75.68%

About 5 times a week, I'm getting a Blue Screen with Bug Check Code: 0x000000fe caused by the USBPORT.SYS driver.

I have tried to fully reinstall Windows 7 from the Levono Carbon X1 reinstall DVD, but the problem has resurfaced.

Can somebody please help me troubleshoot what is causing this erratic crash? There doesn't seem to be a specific app I am running when this occurs.

A:BSOD randomly occurring on Lenvo Carbon X1 - BUGCODE_USB_DRIVER

Hello blueplastic.

Update Intel usb3 drivers from https://downloadcenter.intel.com/default.aspx .

And, Disable USB Selective Suspensd too.
USB Selective Suspend - Turn On or Off

For the devices, first, detach all the USB devices other than the keyboard and mouse.
Then, Update the drivers for them all, including the keyboard and mouse, if any third party drivers are installed for them.

Also have a look at USB Driver - General Fix for Problems.

Let us know the results.
_______________________________________________________________________
BSOD ANALYSIS:

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck FE, {6, fffffa800eb7cad0, 48766544, 0}

Probably caused by : WinUSB.sys ( WinUSB!WinUSB_PrepareHardware+157 )

Followup: MachineOwner
---------

http://www.sevenforums.com/bsod-help-support/293309-bsod-randomly-occurring-lenvo-carbon-x1-bugcode_usb_driver.html
Relevancy 75.68%

Recently my PC has begun to BSOD during use. I've read through quite a few other threads on the same problem and i have general understanding of the cause of this problem.Could anyone offer any assistance on how to prevent future BSODs? I have attached dump files i attained from SF Diagnostic Tool.
Thanks in advance

Attachment 312994

A:Randomly Occurring BSOD's Driver Irql not less or equal

More information is required.

You are getting errors from your Atheros NIC driver, I need to know what exact version you have so I can point you to the correct driver.


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck D1, {0, 2, 0, fffff88003f884be}

Unable to load image \SystemRoot\system32\DRIVERS\L1C62x64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for L1C62x64.sys
*** ERROR: Module load completed but symbols could not be loaded for L1C62x64.sys
Probably caused by : L1C62x64.sys ( L1C62x64+64be )

Followup: MachineOwner

Code:
fffff880`03be30e8 fffff800`030dc169 : 00000000`0000000a 00000000`00000000 00000000`00000002 00000000`00000000 : nt!KeBugCheckEx
fffff880`03be30f0 fffff800`030dade0 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000001 : nt!KiBugCheckDispatch+0x69
fffff880`03be3230 fffff880`03f884be : fffffa80`0e488fc0 00000000`00000078 fffffa80`1153a230 fffffa80`1153a270 : nt!KiPageFault+0x260 (TrapFrame @ fffff880`03be3230)
fffff880`03be33c0 fffffa80`0e488fc0 : 00000000`00000078 fffffa80`1153a230 fffffa80`1153a270 fffffa80`0e488fc0 : L1C62x64+0x64be
fffff880`03be33c8 00000000`00000078 : fffffa80`1153a230 fffffa80`1153a270 fffffa80`0e488fc0 fffffa80`0e5c0870 : 0xfffffa80`0e488fc0
fffff880`03be33d0 fffffa80`1153a230 : fffffa80`1153a270 fffffa80`0e488fc0 fffffa80`0e5c0870 fffffa80`112cd3f4 : 0x78
fffff880`03be33d8 fffffa80`1153a270 : fffffa80`0e488fc0 fffffa80`0e5c0870 fffffa80`112cd3f4 00000000`00000550 : 0xfffffa80`1153a230
fffff880`03be33e0 fffffa80`0e488fc0 : fffffa80`0e5c0870 fffffa80`112cd3f4 00000000`00000550 fffffa80`0e5e3558 : 0xfffffa80`1153a270
fffff880`03be33e8 fffffa80`0e5c0870 : fffffa80`112cd3f4 00000000`00000550 fffffa80`0e5e3558 00000000`00000000 : 0xfffffa80`0e488fc0
fffff880`03be33f0 fffffa80`112cd3f4 : 00000000`00000550 fffffa80`0e5e3558 00000000`00000000 fffffa80`0e4899f8 : 0xfffffa80`0e5c0870
fffff880`03be33f8 00000000`00000550 : fffffa80`0e5e3558 00000000`00000000 fffffa80`0e4899f8 fffff880`03f8859b : 0xfffffa80`112cd3f4
fffff880`03be3400 fffffa80`0e5e3558 : 00000000`00000000 fffffa80`0e4899f8 fffff880`03f8859b fffffa80`00000564 : 0x550
fffff880`03be3408 00000000`00000000 : fffffa80`0e4899f8 fffff880`03f8859b fffffa80`00000564 00000000`00000000 : 0xfffffa80`0e5e3558

Code:
1: kd> .trap fffff880`03be3230
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000000 rbx=0000000000000000 rcx=00000000000015f2
rdx=0000000000000000 rsi=0000000000000000 rdi=0000000000000000
rip=fffff88003f884be rsp=fffff88003be33c0 rbp=fffffa800e5e3558
r8=00000000000000df r9=fffffa800e489000 r10=2200b40500000060
r11=fffff88003be33e0 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei pl nz na pe nc
L1C62x64+0x64be:
fffff880`03f884be 488b08 mov rcx,qword ptr [rax] ds:d380:00000000`00000000=????????????????
This indicates your Atherso NIC driver has caused a page fault.

http://www.sevenforums.com/bsod-help-support/327717-randomly-occurring-bsods-driver-irql-not-less-equal.html
Relevancy 75.68%

I am having some troubles with my computer because of this issue Now nearly daily my computer crashes and a BSOD appears Usually this problem wasn't this frequent it used to happen weekly though but now it's irritating I ignored it first because once a week isn't that much but now it's happening nearly daily here's my dump file I hope you can help me out please Thanks Detailed information regarding my PC Processor AMD Phenom tm II X T Processor Manufacturer AMD Speed GHz Number of Cores CPU ID BFBFF FA Family Model A Stepping Revision BSOD a now, randomly, now for more frequently been occurring long time Video Card AMD Radeon HD Series Manufacturer ATI Chipset AMD Radeon HD Series Dedicated Memory GB Total Memory GB Pixel Shader Version Vertex Shader Version Hardware T amp L Yes Vendor ID Device ID Plug and Play ID VEN amp DEV amp SUBSYS amp REV Driver Version Memory GB Operating System Microsoft Windows Home Premium Edition Service Pack build -bit Service Pack Size BSOD randomly, been occurring for a long time now, now more frequently Bit Edition Home Premium Version Locale BIOS BIOS Date Ver Version American Megatrends Inc Manufacturer American Megatrends Inc Date Display Maximum Resolution x Sound Device AMD High Definition BSOD randomly, been occurring for a long time now, now more frequently Audio Device Driver Version Sound Device VIA High Definition Audio Driver Version DVD HL-DT-ST DVDRAM GH NS ATA Device CD HL-DT-ST DVDRAM GH NS ATA Device Drive Size GB Free GB Drive Size GB Free GB Browsers Internet Explorer Chrome Firefox x en-US Safari Software Java Flash DirectX NET QuickTime Adobe PDF Reader The file attached is the dump file the reply has the DM log collector report

A:BSOD randomly, been occurring for a long time now, now more frequently

DM Log Collector Report

http://www.sevenforums.com/bsod-help-support/349989-bsod-randomly-been-occurring-long-time-now-now-more-frequently.html
Relevancy 75.68%

Is Windows - x -bit or x -bit - the original installed OS on the 0x124 randomly frequent - BSOD occurring very seemingly system No - Homebuilt computer - an OEM or full retail version Full Retail - What is the age of system hardware roughly years - different components are BSOD 0x124 occurring seemingly randomly - very frequent different ages - What is the age of BSOD 0x124 occurring seemingly randomly - very frequent OS installation have you re-installed the OS approximately months I BSOD 0x124 occurring seemingly randomly - very frequent haven't recently changed any hardware so I'm not sure where to start - I ran the memory test overnight and found no errors I ran a video card stress test for about an hour with no issues my HD's both sound fine I know that's not the only symptom but just to put that out there I did have two of these memory sticks running in dual channel but when I initially installed Win it would hang at the install screen and it ended up being because of one of the sticks of memory which is why I'm only running one GB stick now so that was my first thought - but it ran fine for months on this stick and the memory test ran fine so I'm steering away from this I get this error very frequently and almost always on the first boot of the session if I wait a couple hours I boot it and it freezes at boot and then loads fine the second time I'm at college so I don't have another computer I can pull parts from or the Win disc so I was hoping that somewhere hidden in these files it might give a hint as to what is wrong Please let me know if I left something out that will help Thank you in advance for any help you can provide Cody edit Updated system specs

A:BSOD 0x124 occurring seemingly randomly - very frequent

  
Quote: Originally Posted by c0dy


Is Windows 7 . . .
- x86 (32-bit) or x64 ? 64-bit
- the original installed OS on the system? No - Homebuilt computer
- an OEM or full retail version? Full Retail

- What is the age of system (hardware)? roughly 3 years - different components are different ages
- What is the age of OS installation (have you re-installed the OS?) approximately 8 months

I haven't recently changed any hardware, so I'm not sure where to start - I ran the memory test overnight and found no errors, I ran a video card stress test for about an hour with no issues, my HD's both sound fine (I know that's not the only symptom, but just to put that out there).

I did have two of these memory sticks running in dual channel, but when I initially installed Win7 it would hang at the install screen and it ended up being because of one of the sticks of memory (which is why I'm only running one 2GB stick now), so that was my first thought - but it ran fine for months on this stick, and the memory test ran fine so I'm steering away from this.

I get this error very frequently, and almost always on the first boot of the session (if I wait a couple hours I boot it and it freezes at boot and then loads fine the second time).

I'm at college so I don't have another computer I can pull parts from (or the Win7 disc), so I was hoping that somewhere hidden in these files it might give a hint as to what is wrong... Please let me know if I left something out that will help!

Thank you in advance for any help you can provide!

Cody
edit: Updated system specs



Cody hi and welcome
this is almost certainly hardware and probably RAM or CPU. The only thing I can see in software that might do this is your Avast.

I assume you arent overclocking or running a raid.

http://www.sevenforums.com/bsod-help-support/184105-bsod-0x124-occurring-seemingly-randomly-very-frequent.html
Relevancy 75.68%

BSOD message indicates CDD.dll error. The error pops up generally when I'm playing online games, but not always. I do have 8Gb of RAM and suspect that the problem is 32bit version of Win 7 only seems to recognize 4Gb.

A:BSOD occurring randomly, suspecting memory error

Hi Indigo99.

Install Service pack 1 and all other windows updates. Otherwise the system will remain vulnerable to threats including BSODs.

Code:
Windows 7 Kernel Version 7600 MP (2 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.17273.x86fre.win7_gdr.130318-1532
Learn how to install Windows 7 Service Pack 1 (SP1)
Service Pack and Update Center - Microsoft Windows
Report us for any further BSOD after installing Service Pack 1.

http://www.sevenforums.com/bsod-help-support/349536-bsod-occurring-randomly-suspecting-memory-error.html
Relevancy 75.68%

Hey I have been getting BSOD errors more frequently recently it has been occurring on a daily basis in the past weeks and today it occurred twice Well it didnt start weeks ago it started many months and it used to happen now and then then start weekly and error occurring 0x00000109 sorta randomly, BSOD then daily I didnt really try googling what prblem BSOD occurring sorta randomly, error 0x00000109 could be I just uninstalled programs and games I don't use play anymore and well that sorta worked I thought the problem was permanently gone but then again it started occurring now and then after about a week or And then well yeah weeks ago started occurring daily basis Now I googled it and found a lot of stuff about BSOD understood none anyway Then i found this forum yay I haven't found any pattern as to when they occur sometimes they happen when I watch a movie or when I'm randomly surfing the net fyi it happened an hour or ago when I was just creating a account to join this forum I use this Android Emulator called Bluestacks I use it often for whatsapp my phone is too old and can't support whatsapp Could this be the problem So yeah any solution people

A:BSOD occurring sorta randomly, error 0x00000109

and oh yeah, I got this program called Soluto, which is some system checker of some sort.
It sent me an e-mail during my last BSOD

-------------------------------------------------------------------------
You've recently experienced a Blue Screen of Death on your Samsung

5 Hours ago (24 Jul 2013 16:14)



Bug check code: 00000109

Probably caused by: nt Driver
--------------------------------------------------------------------

http://www.sevenforums.com/bsod-help-support/298556-bsod-occurring-sorta-randomly-error-0x00000109.html
Relevancy 75.68%

Hi all,

I have a computer that's been overall working great.

I recently upgraded both the video card as well as all 4 RAM sticks. Put in a bunch of my hard drives. But every once in a while I get a random BSOD (usually in the middle of the night when I'm not actively using the computer). Any help with what might be wrong would be appreciated.

Thanks you all so much! I'm amazed by how knowledgeable you all are.

A:Help with random BSOD's occurring randomly, vid card and RAM upgrades.

Hi anorexicwallet.

As the issue started to occur after you changed RAM, it would better that you test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

http://www.sevenforums.com/bsod-help-support/333016-help-random-bsods-occurring-randomly-vid-card-ram-upgrades.html
Relevancy 75.68%

Lately I've been getting a BSOD with a stop: 0x0000003B error on my laptop. I've tried updating my graphics driver, running a sfc /scannow test, tried the applicable hotfix from the Microsoft website and nothing solves the issue.

Here are the contents of my windows/minidump/ folder: https://skydrive.live.com/redir?resi...50BD2755%21107

I'm running Windows 7 Professional 64 bit on a SONY VAIO VPCEG11FX/B.

Thanks in advance for the help.

A:BSOD error 0x0000003B occurring randomly & frequently

Welcome, please follow the Blue Screen of Death (BSOD) Posting Instructions .

http://www.sevenforums.com/bsod-help-support/313768-bsod-error-0x0000003b-occurring-randomly-frequently.html
Relevancy 75.68%

I had posted on this forum about 2 months ago and got my BSOD problem fixed that time,
After that, I got 1 BSOD after 2 weeks I guess, but then nothing again until 2 days ago

I ignored it that time but then it happened twice yesterday
and today it happened twice as well

I don't think I installed any new software lately, so I don't have an idea what might be causing it.
Any help welcome

A:BSOD occurring randomly and frequently in past 2 days.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

CRITICAL_STRUCTURE_CORRUPTION (109)
This bugcheck is generated when the kernel detects that critical kernel code or
data have been corrupted. There are generally three causes for a corruption:
1) A driver has inadvertently or deliberately modified critical kernel code
or data. See http://www.microsoft.com/whdc/driver/kernel/64bitPatching.mspx
2) A developer attempted to set a normal kernel breakpoint using a kernel
debugger that was not attached when the system was booted. Normal breakpoints,
"bp", can only be set if the debugger is attached at boot time. Hardware
breakpoints, "ba", can be set at any time.
3) A hardware corruption occurred, e.g. failing RAM holding kernel code or data.
Arguments:
Arg1: a3a039d8a2d496fd, Reserved
Arg2: b3b7465ef552d2df, Reserved
Arg3: fffff88003970640, Failure type dependent information
Arg4: 0000000000000003, Type of corrupted region, can be
0 : A generic data region
1 : Modification of a function or .pdata
2 : A processor IDT
3 : A processor GDT
4 : Type 1 process list corruption
5 : Type 2 process list corruption
6 : Debug routine modification
7 : Critical MSR modification
Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

Stress test the CPU.
Hardware - Stress Test With Prime95

If those tests comes back as free from errors, enable Driver Verifier to monitor the drivers.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.



   Information
Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.



   Warning
Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.



   Tip

If you fail to get on the Desktop because of DV, Boot into Advanced Boot Options > Safe mode. Disable DV there. Now boot normally again, and try following the instruction of enabling DV again.
If you cannot boot in Safe mode too, do a System Restore to a point you made earlier.

Let us know the results, with the subsequent crash dumps, if any. Post it following the Blue Screen of Death (BSOD) Posting Instructions.

http://www.sevenforums.com/bsod-help-support/304792-bsod-occurring-randomly-frequently-past-2-days.html
Relevancy 74.82%

My OS is Windows 7 Professional x64

These seem to happen erratically, at apparently random times, regardless of how heavily my system resources are being used. I've gone weeks without any errors, and I've faced several errors on the same day, even under the same computer usage patterns. I haven't been able to attribute these BSODs to any specific task; some happened while browsing the web, others while gaming, others still while leaving the machine idle. I'm inclined to believe that these errors are caused by hardware, since I've faced similar problems before reformatting my machine.

Majority of these BSODs are IRQL_NOT_LESS_OR_EQUAL, code 0x0000000a, but I've had other error codes under similarly random circumstances.

Attached is the folder of all diagnostic files grabbed via SF Diagnostic Tool.

Thank you in advance.

A:Various BSOD errors occurring seemingly randomly. Custom build.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {fffffa000a0d55b8, 2, 0, fffff80002cbd024}

Probably caused by : memory_corruption ( nt!MiResolveTransitionFault+124 )

Followup: MachineOwner
---------

Code:
Host Name: PAWEL-PC
OS Name: Microsoft Windows 7 Professional
OS Version: 6.1.7601 Service Pack 1 Build 7601
OS Manufacturer: Microsoft Corporation
OS Configuration: Standalone Workstation
OS Build Type: Multiprocessor Free
Registered Owner: Pawel
Registered Organization:
Product ID: 00371-OEM-8992671-00008
The only thing I can recommend at the moment is to test your RAM, but longer term I'll recommend installing a genuine Windows 7 -- an HP OEM installation on a retail motherboard is counterfeit. BSOD's on these sorts of installations are very difficult to diagnose and many BSOD analysts won't attempt them.

http://www.sevenforums.com/bsod-help-support/319169-various-bsod-errors-occurring-seemingly-randomly-custom-build.html
Relevancy 74.82%

Hi there,

Lately, i've been receiving a lot of these blue screen errors, especially when browsing the internet (ie YouTube etc.), but not during playing games. Could someone please help me out here? it's driving me crazy.

I've attached multiple dump files, looking at the dump files it seems like ntoskml.exe is being problematic? There is also the occasional nVidia driver issue. I really don't know what to do though.

I have attached the minidump files relevant in the zip.

A:BSOD error 0x3b most frequently. Randomly occurring while browsing net

Yes, it is some issues with the networking.

Symantec Heuristics Driver is failing continuously. It causes issues with network.

Code:
fffff880`0a8cb958 fffff880`07b2c743Unable to load image \??\C:\ProgramData\Norton\{0C55C096-0F1D-4F28-AAA2-85EF591126E7}\NIS_20.2.0.19\Definitions\BASHDefs\20131101.003\BHDrvx64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for BHDrvx64.sys
*** ERROR: Module load completed but symbols could not be loaded for BHDrvx64.sys
BHDrvx64+0x10e743
Description here: Driver Reference Table - BHDrvx64.sys

Uninstall Norton and all Symentec products using Norton Removal tool. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.
Download, install and update those, and then run full system scans with both of them, one by one.

Also, Realtek PCIe GBE Family Controller is failing, too.

Code:
fffff880`0e905a88 fffff880`07e23edbUnable to load image \SystemRoot\system32\DRIVERS\Rt64win7.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for Rt64win7.sys
*** ERROR: Module load completed but symbols could not be loaded for Rt64win7.sys
Rt64win7+0x7edb
Update it from Realtek ... Win7 and WinServer 2008 R2 Auto Installation Program dated 2013/9/24.

Let us know the results.

http://www.sevenforums.com/bsod-help-support/311257-bsod-error-0x3b-most-frequently-randomly-occurring-while-browsing-net.html
Relevancy 73.96%

Hello all I've just rebuilt my computer with a dump creating 0x000000d1c5 BSOD Randomly no files. occurring, longer new Mobo CPU and GPU The specs are in my profile I've used BSOD Randomly occurring, no longer creating dump files. 0x000000d1c5 my existing drives PSU and some RAM from another project along with a clean install of x Home Prem I've had intermittent bluescreens from day one three days ago and reinstalled the drivers many times Each bluescreen error is different but only the first couple actually created dump files now they're not any more I've included the two dump files my PC has created The bluescreens occur randomly and I've stress tested the computer and GPU many times and all seems fine under load I've gamed on it and used it normally and the screens can occur doing either If I leave the computer turned on other night I'll probably come back to a BSOD Each time the error name is different Any help would really BSOD Randomly occurring, no longer creating dump files. 0x000000d1c5 be appreciated I've never had such a frustrating problem I should add I've just gone from a single monitor back to two after buying the correct HDMI to DVI cable and now the BSODs are much more frequent so gone back to one for now

A:BSOD Randomly occurring, no longer creating dump files. 0x000000d1c5

Hello Andeh,

Is the firmware for your SSD up to date?


Code:
Microsoft (R) Windows Debugger Version 6.3.9600.16384 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\YUSRA\Downloads\LIONEL_HUTZ-02_01_2015_193237_73\123014-7956-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (6 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.18409.amd64fre.win7sp1_gdr.140303-2144
Machine Name:
Kernel base = 0xfffff800`02e00000 PsLoadedModuleList = 0xfffff800`03043890
Debug session time: Tue Dec 30 18:41:16.962 2014 (UTC + 6:00)
System Uptime: 0 days 0:04:15.117
Loading Kernel Symbols
.

Press ctrl-c (cdb, kd, ntsd) or ctrl-break (windbg) to abort symbol loads that take too long.
Run !sym noisy before .reload to track down problems loading symbols.

..............................................................
................................................................
.............................
Loading User Symbols
Loading unloaded module list
........
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck D1, {fffff88034203bb0, 2, 1, fffff88011202753}

*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
Probably caused by : atikmdag.sys ( atikmdag+145753 )

Followup: MachineOwner
---------

2: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arguments:
Arg1: fffff88034203bb0, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, value 0 = read operation, 1 = write operation
Arg4: fffff88011202753, address which referenced memory

Debugging Details:
------------------
WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff800030ad100
GetUlongFromAddress: unable to read from fffff800030ad1c0
fffff88034203bb0 Nonpaged pool

CURRENT_IRQL: 2

FAULTING_IP:
atikmdag+145753
fffff880`11202753 001d57140023 add byte ptr [fffff880`34203bb0],bl

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

BUGCHECK_STR: 0xD1

PROCESS_NAME: System

ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) x86fre

TRAP_FRAME: fffff880020ccbb0 -- (.trap 0xfffff880020ccbb0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000003 rbx=0000000000000000 rcx=fffffa8008c78000
rdx=0000000000000010 rsi=0000000000000000 rdi=0000000000000000
rip=fffff88011202753 rsp=fffff880020ccd48 rbp=0000000000000000
r8=fffff8801120273b r9=fffff88... Read more

http://www.sevenforums.com/bsod-help-support/357128-bsod-randomly-occurring-no-longer-creating-dump-files-0x000000d1c5.html
Relevancy 70.52%

Windows Ultimate Bit Gigabyte EP -UD L motherboard running G Ram Radeon HD G video card The computer has I a suspect BSOD, problem Random hardware been running good until a few months ago when random BSOD's began to occur Maybe only once a month or so so it wasn't a major problem but Random BSOD, I suspect a hardware problem something I wanted to fix I made sure all my drivers were up to date Random BSOD, I suspect a hardware problem with no change in the BSOD problem I bought G ram and added the new ram last week and the problem got worse I suspected faulty ram removed the old G since the Random BSOD, I suspect a hardware problem BSOD was occurring with just the old G and the problem improved but was still worse than it was without the G upgrade I concluded that my ram is not the problem Now I am back to the original G ram until I get this figured out I suspect that with the added demand on the computer by adding more ram it runs much nicer and more quot crisp quot that my video card can't handle the load I suspect perhaps my video card is faulty since the problem happens most when watching a streaming movie or other high video demand programs are running I am not a gamer so don't have any info regarding games that might make BSOD occur Can hardware issues cause BSOD's

A:Random BSOD, I suspect a hardware problem

  
Quote: Originally Posted by Skutt


Windows 7 Ultimate 64Bit.
Gigabyte EP43-UD3L motherboard running 2G Ram.
Radeon HD4670 1G video card

The computer has been running good until a few months ago when random BSOD's began to occur. Maybe only once a month or so, so it wasn't a major problem but something I wanted to fix. I made sure all my drivers were up to date with no change in the BSOD problem.

I bought 4G ram and added the new ram last week and the problem got worse. I suspected faulty ram, removed the old 2G since the BSOD was occurring with just the old 2G, and the problem improved but was still worse than it was without the 4G upgrade. I concluded that my ram is not the problem. Now I am back to the original 2G ram until I get this figured out. I suspect that with the added demand on the computer by adding more ram, it runs much nicer and more "crisp", that my video card can't handle the load.

I suspect perhaps my video card is faulty since the problem happens most when watching a streaming movie, or other high video demand programs are running. I am not a gamer so don't have any info regarding games that might make BSOD occur.

Can hardware issues cause BSOD's?


Hardware can easily cause bsod's.

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:

* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.
To ensure minidumps are enabled:

* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

http://www.sevenforums.com/bsod-help-support/192356-random-bsod-i-suspect-hardware-problem.html
Relevancy 67.94%

My computer is just a few months old, started getting BSOD's randomly, usually when on desktop or just running Chrome browser.
System details:
Windows 7 Pro 64
Gigabyte Z77-HD3
Intel i5 3.4MHz
AMD Radeon 7700HD
8GB DDR3

A:BSOD "Unexpected Kernel Mode Trap" occurring randomly

Hi 13islucky.

Are you overclocking? As you are getting BSODs, you should stop overclocking and run all the hardware components like CPU, GPU and RAM to their default settings. Also set the BIOS to default, too.
How To Clear CMOS (Reset BIOS)

Intel RST is failing here:

Code:
Unable to load image \SystemRoot\system32\DRIVERS\iaStor.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for iaStor.sys
*** ERROR: Module load completed but symbols could not be loaded for iaStor.sys
Get rid of intel rapid storage. First uninstall it from Control Panel > Programs and Features. Then Uninstall the driver from device manager.
Right click on "my computer" icon and click "manage" on the context menu.
It will open the "computer management" window.
Select "Device Manager" in the left pane, It will list all the existing devices up.
Expand "IDE ATA/ATAPI controllers" by clicking on the triangle in front of it.
Select one Intel device item under it, right click, uninstall.
Continue the process for all Intel items under "IDE ATA/ATAPI controllers"
Now restart the computer. At restart, windows will auto configure the appropriate native system driver.
Do some Disc checks.
Reseat the sata and power.

Run chkdsk /f/r, following the option two of the tutorial Disk Check
Seatool for dos: SeaTools | Seagate download
Burn it in a blank cd. boot from the CD, click on "Accept", wait for it to finish detecting the drives, then in the upper left corner select "Basic Tests", then select "Long Test" and let it run.
Post screenshots of both your HDDs using CrystalDiskInfo - Software - Crystal Dew World
Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

Finally, at least as a test, uninstall Eset. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.
Download, install and update those, and then run full system scans with both of them, one by one.

Let us know the results.
-----------------------------------------------------------------------------------------------
BSOD ANALYSIS:


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 7F, {8, 80050033, 406f8, fffff8000327bd2d}

*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : ntkrnlmp.exe ( nt!KiDoubleFaultAbort+b2 )

Followup: MachineOwner
---------

2: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

UNEXPECTED_KERNEL_MODE_TRAP (7f)
This means a trap occurred in kernel mode, and it's a trap of a kind
that the kernel isn't allowed to have/catch (bound trap) or that
is always instant death (double fault). The first number in the
bugcheck params is the number of the trap (8 = double fault, etc)
Consult an Intel x86 family manual to learn more about what these
traps are. Here is a *portion* of those codes:
If kv shows a taskGate
use .tss on the part before the colon, then kv.
Else if kv shows a trapframe
use .trap on that val... Read more

http://www.sevenforums.com/bsod-help-support/293245-bsod-unexpected-kernel-mode-trap-occurring-randomly.html
Relevancy 67.08%

Just built a computer 2 days ago and a BSOD has been randomly occurring whether I am doing something on it or not. I have gotten a variety of BSOD's one of which was "IRQL_NOT_LESS_THAN_OR_EQUAL." I thought it might have been bad ram so I have tested each stick of ram on multiple passes with no errors and I did a stress test on the video card. Finally I updated Windows 7 completely. Yet I still get a BSOD and I have exhausted my troubleshooting techniques. Attached it the performance monitor report and the dmp's. Any help would be much appreciated. Thank you in advance

System specs:
Windows 7 64bit
Amd Phenom II black edition 3.6ghz
8gb of ram
WD 500gb blue HD
EVGA gtx 550 ti

A:BSOD randomly occurring "IRQL_NOT_LESS_THAN_OR_EQUAL"

3 of these were memory corruption (probably a driver), the remaining one (BCC101 clock_watchdog) is troublesome on a two day old machine.

Is it under warranty?

The memory corruption can be diagnosed as can the BCC101 but it relates to the CPU>

http://www.sevenforums.com/bsod-help-support/214362-bsod-randomly-occurring-irql_not_less_than_or_equal.html
Relevancy 65.79%

I i BSOD gaming am Occurring when Randomly while gaming??? and not dont know why I recently bought a new computer and it has been doing this since i first got it I dont know why but hopefully you can help me My Computer Stats -Intel BSOD Occurring Randomly while gaming and when i am not gaming??? Core i - K -GIGABYTE GA-Z X-UD H Z - NVIDIA GeForce GTX Ti GB -Corsair Vengeance GB - TB Hard Drive -Cooler Master Silent Pro Gold Plus Watts -Microsoft BSOD Occurring Randomly while gaming and when i am not gaming??? Windows Home Premium -Bit Edition Link to My SF tool file should be as a attachment This the message that Windows gave me to check for solution after i restarted the BSOD Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode BCP BCP FFFFFA BC BCP FE BCP OS Version Service Pack Product Files that help describe the problem C Windows Minidump - - dmp C Users dbzethioboy AppData Local Temp WER- - sysdata xml Read our privacy statement online Windows Privacy Statement - Microsoft Windows If the online privacy statement is not available please read our privacy statement offline C Windows system en-US erofflps txt When the BSOD occurred i copyed the code Stop x x xFFFFFA DC x FE x Hopefully you guys could help me out this is the first time i have dealt with something like this Thanks Dbzethioboy

A:BSOD Occurring Randomly while gaming and when i am not gaming???

Hi Welcome to SF

Unfortunately the dumps you uploaded are all 0x124 errors which are hardware related
BSOD Index
My initial thought is as this is new machine i would return it to place of purchase as something is obviously not right, if you wish to look into this then...
Have a read of this thread it will give you some things to try
Stop 0x124 - what it means and what to try
Analysing your dumps (they are all the same) they state an error with level 2 cache on your cpu

Code:
Section 2 : x86/x64 MCA
-------------------------------------------------------------------------------
Descriptor @ fffffa800bc43138
Section @ fffffa800bc432c0
Offset : 664
Length : 264
Flags : 0x00000000
Severity : Fatal
Error : DCACHEL2_PREFETCH_ERR (Proc 1 Bank 6)
Status : 0xfe20000000021166
Address : 0x00000000a3edddc0
Misc. : 0x0000003206000086

Code:
Section 2 : x86/x64 MCA
-------------------------------------------------------------------------------
Descriptor @ fffffa800bc59138
Section @ fffffa800bc592c0
Offset : 664
Length : 264
Flags : 0x00000000
Severity : Fatal
Error : DCACHEL2_DRD_ERR (Proc 4 Bank 6)
Status : 0xfe20000000021136
Address : 0x000000003d1bddc0
Misc. : 0x0000007007000086

Code:
Section 2 : x86/x64 MCA
-------------------------------------------------------------------------------
Descriptor @ fffffa800bc22138
Section @ fffffa800bc222c0
Offset : 664
Length : 264
Flags : 0x00000000
Severity : Fatal
Error : DCACHEL2_DRD_ERR (Proc 5 Bank 6)
Status : 0xfe20000000021136
Address : 0x000000004f4fddc0
Misc. : 0x000000b040000086
So you could potentially be looking at a problem with your cpu or motherboard
Check temperatures and make sure chip is not overheating

http://www.sevenforums.com/bsod-help-support/275126-bsod-occurring-randomly-while-gaming-when-i-am-not-gaming.html
Relevancy 64.5%

I just installed a new hard drive and my computer has been flipping off at random Based on the minitoolbox that I ran I'm thinking it's related to windows Any ideas MiniToolBox by Farbar Version - - Randomly Computer suspect error Restarting, windows Ran by Westn Mate administrator on - - at Running from C Users Westn Mate Downloads Microsoft Windows Home Premium Service Pack X Model MS- Manufacturer MSI Boot Mode Normal Event log errors Application errors Error PM Source Microsoft-Windows-CAPI User Description Failed extract of third-party root list from auto update cab at lt http www download windowsupdate com msdownload update v static trustedr en authrootstl cab gt with error A required certificate is not within its validity period when verifying against the current system clock or the timestamp in the signed file Error PM Source WinMgmt User Description root CIMV SELECT FROM InstanceModificationEvent WITHIN WHERE TargetInstance ISA Win Processor AND TargetInstance LoadPercentage gt x Error PM Source Microsoft-Windows-CAPI User Description Failed extract of third-party root Computer Randomly Restarting, suspect windows error list from auto update cab at lt http www download windowsupdate com msdownload update v static trustedr en authrootstl cab gt with error A required certificate is not within its validity period when verifying against the current system clock or the timestamp in the signed file Error PM Source WinMgmt User Description root CIMV SELECT FROM InstanceModificationEvent WITHIN WHERE TargetInstance ISA Win Processor AND TargetInstance LoadPercentage gt x Error PM Source Microsoft-Windows-CAPI User Description Failed extract of third-party root list from auto update cab at lt http www download windowsupdate com msdownload update v static trustedr en authrootstl cab gt with error A required certificate is not within its validity period when verifying against Computer Randomly Restarting, suspect windows error the current system clock or the timestamp in the signed file Error PM Source WinMgmt User Description root CIMV SELECT FROM InstanceModificationEvent WITHIN WHERE TargetInstance ISA Win Processor AND TargetInstance LoadPercentage gt x Error PM Source Microsoft-Windows-CAPI User Description Failed extract of third-party root list from auto update cab at lt http www download windowsupdate com msdownload update v static trustedr en authrootstl cab gt with error A required certificate is not within its validity period when verifying against the current system clock or the timestamp in the signed file Error PM Source Microsoft-Windows-CAPI User Description Failed extract of third-party root list from auto update cab at lt http www download windowsupdate com msdownload update v static trustedr en authrootstl cab gt with error A required certificate is not within its validity period when verifying against the current system clock or the timestamp in the signed file Error PM Source Microsoft-Windows-CAPI User Description Failed extract of third-party root list from auto update cab at lt http www download windowsupdate com msdownload update v static trustedr en authrootstl cab gt with error A required certificate is not within its validity period when verifying against the current system clock or the timestamp in the signed file Error PM Source Microsoft-Windows-CAPI User Description Failed extract of third-party root list from auto update cab at lt http www download windowsupdate com msdownload update v static trustedr en authrootstl cab gt with error A required certificate is not within its validity period when verifying against the current system clock or the timestamp in the signed file System errors Error PM Source EventLog User Description The previous system shutdown at PM on was unexpected Error PM Source Service Control Manager User Description The Network List Service service depends on the Network Location Awareness service which failed to start because of the following error Error PM Source Service Cont... Read more

A:Computer Randomly Restarting, suspect windows error

Please Publish a Snapshot using Speccy - http://www.bleepingcomputer.com/forums/topic323892.html/page__p__1797792#entry1797792 , taking care to post the link of the snapshot in your next post. 
Louis

http://www.bleepingcomputer.com/forums/t/598983/computer-randomly-restarting-suspect-windows-error/
Relevancy 63.21%

Alrighty So my computer is about a month old it s a Dell Inspiron E and the specs are Intel Core Duo T GHz MB L Cache MHz FSB GB Shared Dual Channel DDR SDRAM at MHz MB ATI MOBILITY RADEON X HyperMemory GB RPM SATA Hard Drive I m running XP Professional I installed a few programs after getting it among them AIM WinRAR OpenOffice Spybot Myst Masterpiece Edition Azureus Guild Wars last two now uninstalled and Picasa All of a sudden a couple of days ago I began getting this message quot The instruction at quot x e d referenced memory at quot x quot The memory could not be quot read quot Click on OK to terminate the program quot I click OK but it ll happen again a few hours later-- I know this because I leave my computer for days at a time and when I wake up my screen saver s off and I know that just isn t kosher So any guidance is greatly greatly greatly appreciated Hope my explanation and such is enough for you to go by I m not an expert but I m pretty good with computers so don t worry about Randomly error. occurring dumbing anything down for me Thanks in advance --Samantha nbsp

Relevancy 63.21%

Hello. Recently, my computer has been constantly crashing while I am doing work, gaming, watching videos, and surfing the web. The system is about a month old, with a Windows 7 Professional x64 operating system (OEM). I have also noticed that the BSODs are becoming more frequent. I appreciate any help that is to follow. Thank you.

A:Randomly occurring BSODs

These crashes were caused by memory corruption probably a driver.
Please run these two tests to verify your memory and find which driver is causing the problem.

* If you are overclocking anything reset to default before running these tests.
In other words STOP!!!

* If you have a Raid update its Driver.

Memtest.





Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5-7 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.



RAM - Test with Memtest86+


Driver Verifier






Quote:
Using Driver Verifier is an iffy proposition.
Most times it'll crash and it'll tell you what the driver is.
But sometimes it'll crash and won't tell you the driver.
Other times it'll crash before you can log in to Windows.
If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise.
Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation"IRP Logging and Force Pending I/O Requests. and click "Next"
NOTE: You can use Low Resource Simulation if you'd like.
From my limited experimentation it makes the BSOD's come faster.
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

If you are using win 8 add these
- Concurrency Stress Test
- DDI compliance checking

Reboot the system and wait for it to crash to the Blue Screen.
Continue to use your system normally, and if you know what causes the crash, do that repeatedly.
The objective here is to get the system to crash because Driver Verifier is stressing the drivers out.
If it doesn't crash for you, then let it run for at least 36 hours of continuous operation.
Reboot into Windows (after the crash) and turn off Driver Verifier by going back in and selecting "Delete existing settings" on the first page, then locate and zip up the memory dump file and upload it with your next post.
If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.

Thanks to JCGriff2 & Usasma.

Sysnative Forums

Driver Reference Table (DRT)




Using Driver Verifier to identify issues with Windows drivers for advanced users

Driver Verifier

Using Driver Verifier (Windows Drivers)

http://www.sevenforums.com/bsod-help-support/230324-randomly-occurring-bsods.html
Relevancy 63.21%

I m running XP-Media Center OS on a Dell XPS laptop with a Mozilla Firefox Browser I have recently been experiencing what seems like random problems with startup and a McAfee security application Sometimes at turn on the computer does a quot disk check quot before starting but not always A Randomly problems occurring few times it has displayed an IBM blue screen with just a single text line saying startup had a problem Randomly occurring problems Now and then McAfee says that it s protection has been disabled and needs fixing When I click fix it says that it cannot be fixed I have run Registry Booster and Registry Defrag and PC Tools Spyware Doctor prior to running HiJackthis Attached is the Hijackthis log Please review the log and make observations and recommendations for improvement Is there a bug these programs are not catching I also notice that there are entries in the log for quot svchost exe quot Is this normal Thanks for your help nbsp

A:Randomly occurring problems

I need help !!
 

https://forums.techguy.org/threads/randomly-occurring-problems.807850/
Relevancy 63.21%

Everything seemed to be running fairly sooth after my last reformat until recently. Now i'm getting a blue screen seemingly randomly before it was more likely to occur while in a game now it happens even watching a youtube video or even when its sitting idle. Ive attached the dmp files and whatnot, if anyone could shed some light on this it would be greatly appreciated.

A:Different BSODs Randomly Occurring again....

Also i forgot to mention Ive run a memory test a few time without any problems.

http://www.sevenforums.com/bsod-help-support/379356-different-bsods-randomly-occurring-again.html
Relevancy 62.35%

Hi,
I'm new to the forum,
recently i'm getting BSOD on my 1 month old laptop with same error code.
I've noticed it happens usually while running BlueStacks with chrome on background.
Error code: Reference_By_Pointer

LENOVO-Tue_06_23_2015_124230_61.zip

Today's two dmp files LENOVO-Sat_06_27_2015_132311_39.zip

Any help Appreciated,
Thanks

A:Frequent BSOD occurring on my Windows 8.1 pro Laptop?

No, Answer
But it has been solved.
It was NETWORX application that caused the problem of BSOD.
I have to untick the Ignore LAN traffic option to solve it.
thanks

http://www.eightforums.com/bsod-crashes-debugging/67678-frequent-bsod-occurring-my-windows-8-1-pro-laptop.html
Relevancy 62.35%

Hi all at BSOD's seemingly Various occurring 8 random in Windows New to the forums first post as I had looked through other threads to try Various BSOD's in Windows 8 occurring seemingly at random and fix a problem I have been having and it looks like a lot of people here are quite knowledgeable on these issues System is as follows ASUS M A TD USB AMD Phenom II X B GHz x GB Geil DDR PC CL MSI HD Twin Frozr Video Card Sandisk Extreme GB SSD System Drive Corsair HX PSU Corsair H CPU Cooler Nothing is overclocked anymore I am on my th fresh install of Windows Pro WMC build bit On every install I have been experiencing the same problems and instability Never had any dramas on previous windows installs The computer seemingly runs fine for a period of time usually or days then all of a sudden I am plagued with BSOD's with varying messages Page fault in non page file area ntfs sys seems to be the most regular however I have removed all other HDD's from the system to see if that fixed the problem but I still had BSOD's I have updated the firmware on my system drive Sandisk Extreme GB SSD running on SATA port My motherboard Asus M A TD USB bios has been updated to the latest revision I have installed the AMD videocard driver instead of running the version included with Windows to see if that helps I have disabled all startup services that were not microsoft and done the same for programs running at startup I have run all the system updates in windows update I have run a Seagate HDD diagnostic tool on my HDD and all checked fine on all tests I have run Sandisk toolbox to check my SSD and it checks fine Checkdisk on all drives detects no issues Memtest says that my memory is fine as does windows memory diagnostic I have disabled automatic updates I have disabled automatic system maintenance as this was freezing my computer to the point that I couldn't do anything in windows aside from open the start menu It wouldn't even let task manager open when running None of these methods I have tried have solved the issue Hopefully someone here may be able to help and know what the problem is Regards Jamie Faulkner

A:Various BSOD's in Windows 8 occurring seemingly at random

Make sure Windows is up-to-date. Do not disable Windows Update. Leave it enabled.
Check for new updates and install them.

Run system file checker. Full tutorial here: SFC /SCANNOW Command - Run in Windows 8

Also, run chkdsk to check and repair the NTFS File system.
Tutorial here: CHKDSK - Check a Drive for Errors in Windows 8

   Tip
Run chkdsk via command prompt, follow option 2 in the tutorial.

Bug Check Analysis:

Code:
ADDITIONAL_DEBUG_TEXT:
You can run '.symfix; .reload' to try to fix the symbol path and load symbols.

MODULE_NAME: Ntfs

FAULTING_MODULE: fffff801e6a89000 nt

DEBUG_FLR_IMAGE_TIMESTAMP: 50eceb5a

WRITE_ADDRESS: unable to get nt!MmSpecialPoolStart
unable to get nt!MmSpecialPoolEnd
unable to get nt!MmPagedPoolEnd
unable to get nt!MmNonPagedPoolStart
unable to get nt!MmSizeOfNonPagedPoolInBytes
fffff8a00f9d9ff8

FAULTING_IP:
Ntfs+cddbc
fffff880`01745dbc 66440164c810 add word ptr [rax+rcx*8+10h],r12w

MM_INTERNAL_CODE: 0

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

BUGCHECK_STR: AV

CURRENT_IRQL: 0

LAST_CONTROL_TRANSFER: from fffff801e6c71e4d to fffff801e6b03740

STACK_TEXT:
fffff880`013e1f28 fffff801`e6c71e4d : 00000000`00000050 fffff8a0`0f9d9ff8 00000000`00000001 fffff880`013e2110 : nt+0x7a740
fffff880`013e1f30 00000000`00000050 : fffff8a0`0f9d9ff8 00000000`00000001 fffff880`013e2110 00000000`00000000 : nt+0x1e8e4d
fffff880`013e1f38 fffff8a0`0f9d9ff8 : 00000000`00000001 fffff880`013e2110 00000000`00000000 fffff801`e6bc1724 : 0x50
fffff880`013e1f40 00000000`00000001 : fffff880`013e2110 00000000`00000000 fffff801`e6bc1724 fffff6fc`c00c0748 : 0xfffff8a0`0f9d9ff8
fffff880`013e1f48 fffff880`013e2110 : 00000000`00000000 fffff801`e6bc1724 fffff6fc`c00c0748 fffffa80`06be6580 : 0x1
fffff880`013e1f50 00000000`00000000 : fffff801`e6bc1724 fffff6fc`c00c0748 fffffa80`06be6580 fffff880`013e2011 : 0xfffff880`013e2110
STACK_COMMAND: .bugcheck ; kb

FOLLOWUP_IP:
Ntfs+cddbc
fffff880`01745dbc 66440164c810 add word ptr [rax+rcx*8+10h],r12w

SYMBOL_NAME: Ntfs+cddbc

FOLLOWUP_NAME: MachineOwner

IMAGE_NAME: Ntfs.sys

BUCKET_ID: WRONG_SYMBOLS

Followup: MachineOwner
---------


Hope this helps,

Dinesh

http://www.eightforums.com/bsod-crashes-debugging/20344-various-bsods-windows-8-occurring-seemingly-random.html
Relevancy 62.35%

Hi all The last couple of weeks I've been having this issue where my computer will freeze lock-up hard And by hard I mean that I can't launch the Task Manager move the mouse cursor or anything it's completely unresponsive To get the machine working again I have to physically restart it using the Power button or the Reset button I initially thought that it was overheating so I opened up the case and gave it a good cleaning with a compressed air duster and verified that the Occurring System Freeze Randomly fans worked properly No System Freeze Occurring Randomly dice I then reformatted and reinstalled Windows Again no luck the issue just keeps happening I ran MemTest overnight and that came through clean I haven't found any issues from Disk Check and MSE comes back with a clean report At this point I'm at my wits' end Any help would be greatly System Freeze Occurring Randomly appreciated as I just don't know what to do at this point Here are my system specs Windows Professional x Retail Core Quad Q GHz Asus P K SE EPU GB RAM nVidia Geforce GT x GB HD x GB HD Last but not least I ran a System Freeze Occurring Randomly System Health Report that's attached to this post I took a look through it and I'm a little confused by some of the errors it found Namely I don't have a PS keyboard my printer is working just fine I've uninstalled LogMeIn and I have MSE installed The Health Report seems to be wrong Thanks so much for your help

A:System Freeze Occurring Randomly

Go through the steps for Troubleshooting Steps for Windows 7



   Warning
Some of the steps require that you open up your system, so before doing any of the re-seating and connection checking steps, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. WARNING: Some steps in that tutorial involve removing the system case or system panels and can void your warranty!!!
The steps specifically related to the warning are steps 8, 10, and 11.
The system health report gives some erroneous information. If you provide the system logs and info from the http://www.sevenforums.com/crashes-d...tructions.html, they can help to sort out where the health report is giving misleading info. Even though you are not having a blue screen crash, those instructions also provide the Event Viewer logs that can indicate problems that cause freezing.

http://www.sevenforums.com/bsod-help-support/234543-system-freeze-occurring-randomly.html
Relevancy 62.35%

Hey guys so im having some issues again with it randomly blue screening. as before it seems to happen more often when playing a graphically intensive game but also happens seemingly randomly as well. When it blue screens it often has issues booting up after and will often blue screen during the the black starting windows screen. Also on rare occasions after hitting the power button no video is displayed on screen. I caught one of the blues screens which was MEMORY_MANAGEMENT so I ran a memory test which came back fine. I was just hoping someone could shed some light on this for me.

Thanks.

Attachment 336596

A:Multiple Different BSODs Randomly Occurring again...

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 4A, {7fefdcb6f6a, 2, 0, fffff880084daca0}

Probably caused by : ntkrnlmp.exe ( nt!KiSystemServiceExit+245 )

Followup: MachineOwner
---------

2: kd> !thread
GetPointerFromAddress: unable to read from fffff8000310c000
THREAD fffffa800929c060 Cid 0c18.0c1c Teb: 000007fffffdc000 Win32Thread: fffff900c1a93ae0 RUNNING on processor 2
Not impersonating
GetUlongFromAddress: unable to read from fffff8000304bba8
Owning Process fffffa80092bfb30 Image: VDeck.exe

Code:
Name VIA High Definition Audio
Manufacturer VIA Technologies, Inc.
Status OK
PNP Device ID HDAUDIO\FUNC_01&VEN_1106&DEV_0397&SUBSYS_1043836C&REV_1000\4&4AC9A6C&0&0001
Driver c:\windows\system32\drivers\viahduaa.sys (6.0.1.8300, 1.27 MB (1,327,520 bytes), 5/15/2010 7:11 PM)
Update your audi drivers - they are significantly outdated.

Run Windows Update - install all updates, including the optional ones.

http://www.sevenforums.com/bsod-help-support/348689-multiple-different-bsods-randomly-occurring-again.html
Relevancy 62.35%

So I've been having the problem for a while now but its gotten progressively worse. Before it would only happen when playing a graphically intensive game now it seems to happen at random. When it blue screens it often has issues booting up after and will often blue screen during the the black starting windows screen. Also on rare occasions after hitting the power button no video is displayed on screen. I'm really not sure what to do anymore Ive ran a few different prime 95 tests on it and the usually finish with one error I also ran 3Dmark on it which finished with no problems but then blue screened immediately after. Ive run the windows memory test on it and that came back with no problems. If there's any other information that could help you guys out let me know, also here's the dump files and what not:

A:Multiple Different BSODs Randomly Occurring

It looks like a driver related issue, however it can't be identified.

Enable Driver Verifier to monitor the drivers.
Driver Verifier -Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.



   Information

Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.


   Warning

Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point Manually before enabling DV.



   Tip
If you fail to get on the Desktop because of DV, Boot into Advanced Boot Options > Safe mode. Disable DV there. Now boot normally again, and try following the instruction of enabling DV again.
If you cannot boot in Safe mode too, do a System Restore to a point you made earlier.

Let us know the results, with the subsequent crash dumps, if any.

http://www.sevenforums.com/bsod-help-support/330006-multiple-different-bsods-randomly-occurring.html
Relevancy 62.35%

My laptop (Dell Latitude D630) has been receiving BSoDs on a regular basis and I'm not sure what's causing them. A full reinstall seemed to rectify some of them, but they still occur sporadically and not under any specific circumstances.

I've upgraded the memory from 2GB to 4GB and also upgraded the hard drive, so I'm not sure if either of these will be a cause. I have a sneaky feeling the Ram is the culprit, but I've uploaded my minidumps and would appreciate some input if any of you can provide any.

Thank you.

A:Randomly occurring BSoDs (Win 7x64)

  
Quote: Originally Posted by GeraltJones


My laptop (Dell Latitude D630) has been receiving BSoDs on a regular basis and I'm not sure what's causing them. A full reinstall seemed to rectify some of them, but they still occur sporadically and not under any specific circumstances.

I've upgraded the memory from 2GB to 4GB and also upgraded the hard drive, so I'm not sure if either of these will be a cause. I have a sneaky feeling the Ram is the culprit, but I've uploaded my minidumps and would appreciate some input if any of you can provide any.

Thank you.


No minidump is there. And only minidumps are not enough to have a closer look to the issue.
Post it following the Blue Screen of Death (BSOD) Posting Instructions.

http://www.sevenforums.com/bsod-help-support/282715-randomly-occurring-bsods-win-7x64.html
Relevancy 61.92%

Hello,

I had been having bsod issues for awhile last year and had gotten help on here and the problem had gone away. Before this recent string of bsods I had only had one in April and none for several months before that. I had a Windows update on the 3rd and didn't notice anything different, but beginning yesterday I began having a slew of bsods. They happened both in high graphic games, browsing the internet, and even just when sitting there. This last one happened when windows was just starting up, I think. I used DriverMax to update all of my drivers, and I even tried doing a restore point from before the update on the 3rd and that seemed to lower the frequency, but then I started getting them again. Any help is much appreciated. I'm attaching the mini dump and the requested zip file.

A:BSOD frequently occurring after Windows update, WIN7_DRIVER_FAULT

If you think that your earlier issue was solved, mark BSOD's keep happening during D3 and other games as solved and continue here.

Uninstall Virtual Clone Drive.

Code:
PNP Device ID ROOT\SCSIADAPTER\0000
Such a thing may cause this type of BSOD.

Free up the startup. Windows does not need any other program to auto start with it, but the auto start programs often conflicts and causes various problems including BSODs.
Click on the Start button
Type ?msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the ?Startup? tab.
Deselect all items other than the antivirus and the touchpad driver, SynTPEnh
Apply > OK
Accept then restart.
Your crash dumps are not showing any finite probable cause.

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

If memtest comes to be free from errors, enable Driver Verifier to monitor the drivers.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.



   Information
Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.



   Warning
Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.



   Tip

If you fail to get on the Desktop because of DV, Boot into Advanced Boot Options > Safe mode. Disable DV there. Now boot normally again, and try following the instruction of enabling DV again.
If you cannot boot in Safe mode too, do a System Restore to a point you made earlier.

Let us know the results, with the subsequent crash dumps, if any. Post it following the Blue Screen of Death (BSOD) Posting Instructions.
_______________________________________________________________________________
BSOD ANALYSIS:

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {fffff80081b0bf58, 2, 0, fffff800032d1238}

Probably caused by : win32k.sys ( win32k!NtUserPeekMessage+a7 )

Followup: MachineOwner
---------

4: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: fffff80081b0bf58, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff800032d1238, address which referenced memory

Debugging Details:
------------------
READ_ADDRESS: G... Read more

http://www.sevenforums.com/bsod-help-support/296324-bsod-frequently-occurring-after-windows-update-win7_driver_fault.html
Relevancy 61.92%

The most recent thing I've done on this computer is rolling back my graphics card drivers a bit and installing all the windows 7 updates (hadn't done so since like 2012), which seemed to fix one type of BSOD I was getting.

I've run both memtest and the built-in windows memory check software on each stick of RAM individually, and neither program reported a single error.

However, I'm still getting SYSTEM_SERVICE_EXCEPTION 0x0000003b BSODs from time to time.
The BSODs are infrequent enough that it's really hard to test them, but frequent enough that I don't feel comfortable doing any serious work on my computer. Appreciate any help, thanks.

A:BSOD Randomly, no new hardware, memtests 0 errors

Install Service pack 1 and all other windows updates. Otherwise the system will remain vulnerable to threats including stop 0x3B BSOD.

Code:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16792.amd64fre.win7_gdr.110408-1633
Learn how to install Windows 7 Service Pack 1 (SP1)
Service Pack and Update Center - Microsoft Windows
Report us for any further BSOD after installing Service Pack 1.
___________________________________________________

Code:
BugCheck 3B, {c0000005, fffff80003f532ad, fffff880258a3e80, 0}

Probably caused by : ntkrnlmp.exe ( nt!ObOpenObjectByPointerWithTag+85 )

Followup: MachineOwner
---------

http://www.sevenforums.com/bsod-help-support/371785-bsod-randomly-no-new-hardware-memtests-0-errors.html
Relevancy 61.92%

Hey y'all!

New member here looking for some help with random BSODs.

It seems like it happens the most when I'm playing music on my computer, the music being stored on my primary hard drive. Sometimes it will happen as Windows is loading, before the computer has a chance to load the login screen.

The error varies at times from IRQL LESS THAN OR EQUAL TO or SYSTEM SERVICE EXCEPTION.

I hope this is enough detail to start with, please let me know if I can provide any further information. Also, attached to this post is my zip file made by the SF Diagnostic Tool.

A:BSOD randomly, no recent hardware installs

Hi basic flair.

Do some Disc checks.
Re-seat the sata and power.

Run chkdsk /f/r, following the option two of the tutorial Disk Check
Test the HDDs: SeaTools for DOS and Windows - How to Use
Scan the system for possible virus infection with the following programs.
Anti-rootkit utility TDSSKiller
Windows Defender Offline
Let us know the results, and upload any further BSODs.

http://www.sevenforums.com/bsod-help-support/320636-bsod-randomly-no-recent-hardware-installs.html
Relevancy 61.92%

I am getting random Bluescreens frequently whether I'm browsing or playing whatever... What I need is some help in analyzing these minidump files, if they would point out to some specific hardware error. Thanks in advance.

A:BSOD occuring randomly, possible hardware problem?

It is Symantec/ Norton NIS/ N360 driver that caused the BSOD...

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck D1, {28, 2, 0, fffff88004cf149f}

*** WARNING: Unable to verify timestamp for SYMNETS.SYS
*** ERROR: Module load completed but symbols could not be loaded for SYMNETS.SYS
Probably caused by : SYMNETS.SYS ( SYMNETS+e49f )

Followup: MachineOwner
---------
Uninstall Norton and all Symentec products using Norton Removal tool. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.

Download, install and update those, and then run full system scans with both of them, one by one.

Let us know the results.

http://www.sevenforums.com/bsod-help-support/313868-bsod-occuring-randomly-possible-hardware-problem.html
Relevancy 61.92%

recently within the last 4 days or so i have been getting BSOD errors occuring about twice a day at random intervals. I have not recently changed any hardware this just started occuring out of the blue (no pun intended).
It appears it is probably a driver conflict or irq, but could use some help.
i have included the dump files and relevant data

A:BSOD randomly started happening, no hardware changes

Security Software (this is just to check that you have security software installed and it is working properly; nothing needs to be done about this at this time):
Code:
mcagent.exe c:\program files\mcafee.com\agent\mcagent.exe 2796 8 200 1380 3/25/2012 7:20 AM 11.0.644.0 1.60 MB (1,675,160 bytes) 12/22/2011 7:37 AM

Possible out of date drivers:
Code:
PROCEXP113 fffff880`0c749000 fffff880`0c751000 Mon Nov 03 14:19:45 2008 (490f6af1) 00008fd1 PROCEXP113.SYS
Rt64win7 fffff880`06fcd000 fffff880`06fff000 Thu Feb 26 02:04:13 2009 (49a65b0d) 000361a5 Rt64win7.sys
RTKVHD64 fffff880`09204000 fffff880`093b0900 Fri May 22 12:04:20 2009 (4a16e924) 001b57b6 RTKVHD64.sys
PROCEXP113.SYS
Rt64win7.sys under Download -> Windows 7 64-Bit -> LAN
RTKVHD64.sys under Download -> Windows 7 64-Bit -> AUDIO



Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [D:\Kingston\BSODDmpFiles\Snipzors\Windows_NT6_BSOD_jcgriff2\031812-69139-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Machine Name:
Kernel base = 0xfffff800`0365d000 PsLoadedModuleList = 0xfffff800`038a2670
Debug session time: Sun Mar 18 13:37:40.616 2012 (UTC - 6:00)
System Uptime: 0 days 0:18:07.520
Loading Kernel Symbols
...............................................................
................................................................
.......................................
Loading User Symbols
Loading unloaded module list
.......
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck D1, {28, 2, 0, fffff88001411b2d}

Probably caused by : NETIO.SYS ( NETIO!RtlCopyBufferToMdl+1d )

Followup: MachineOwner
---------

5: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arguments:
Arg1: 0000000000000028, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff88001411b2d, address which referenced memory

Debugging Details:
------------------


READ_ADDRESS: GetPointerFromAddress: unable to read from fffff8000390c100
0000000000000028

CURRENT_IRQL: 2

FAULTING_IP:
NETIO!RtlCopyBufferToMdl+1d
fffff880`01411b2d 448b5228 mov r10d,dword ptr [rdx+28h]

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

BUGCHECK_STR: 0xD1

PROCESS_NAME: System

TRAP_FRAME: fffff8800c5ce660 -- (.trap 0xfffff8800c5ce660)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=fffff8800c5ce880 rbx=00000000... Read more

http://www.sevenforums.com/bsod-help-support/221035-bsod-randomly-started-happening-no-hardware-changes.html
Relevancy 61.92%

So this blue screen has been happening randomly when probably randomly hardware when BSOD games, playing playing some games and using some applications ever since I built my pc years ago I've upgraded some parts and completely re installed windows in the past but it hasn't been fixed Now it has started to happen again after I started playing Guild Wars I'm pretty sure nothing is overheating because I recently got a much better heatsink and BSOD randomly when playing games, probably hardware added a few case fans I've monitored the temps while playing games and they never go near high enough to cause a blue screen The only parts I haven't upgraded recently are my cpu ram motherboard and HDD but I've ran tests on each of those in the past without anything showing up It could be a simple driver issue but I've posted on forums in the past about this issue and people usually tell me its something hardware they just don't know what If you need more info just ask Any help would be much appreciated Thanks My pc specs AMD athlon II x GHZ GTX ti Biostar a e GB ddr ram W power supply

A:BSOD randomly when playing games, probably hardware

Code:
BugCheck 124, {0, fffffa800646b028, b64a4000, 175}

Probably caused by : AuthenticAMD

Code:
===============================================================================
Section 2 : x86/x64 MCA
-------------------------------------------------------------------------------
Descriptor @ fffffa800646b138
Section @ fffffa800646b2c0
Offset : 664
Length : 264
Flags : 0x00000000
Severity : Fatal

Error : DCACHEL1_EVICT_ERR (Proc 1 Bank 0)
Status : 0xb64a400000000175
Address : 0x00000001368a4f30
Misc. : 0x0000000000000000
It appears to be a bad CPU in my opinion, stop overclocking your CPU or any other hardware, and make sure the CPU is not overheating before running these tests:Hardware - Stress Test With Prime95
Read all the steps within the hardware test tutorials very carefully, as stress tests is designed run components to their maximum capacity, in order to point out failing or faulty hardware components.

http://www.sevenforums.com/bsod-help-support/270827-bsod-randomly-when-playing-games-probably-hardware.html
Relevancy 61.92%

Hello I will try to explain everything I know in as much detail as possible First off my system is running Windows Ultimate x which was installed about a year ago I Error Hardware BSOD randomly 0x0124 built the computer in September In late December I started getting frequent BSODs while playing video games I had assumed it was because the computer was running too hot so I started using HWMonitor to check my temperatures and the computer was running extremely hot around degrees Celsius I later realized that I had the hardware overclocking switches on my motherboard switched on which was causing the heat issues Once 0x0124 Hardware Error BSOD randomly I flipped them off the temperatures dropped to around degrees This is likely the cause of my problems as I probably damaged a part running the computer at those temperatures for the course of at least a month One day in January my computer refused to turn on and I couldn't figure out why but pulling the RAM and reinserting it fixed the issue After this however the DVI port on my graphics card began only outputting in B amp W not a big deal since I 0x0124 Hardware Error BSOD randomly always use HDMI but I figured if there was a problematic part causing the BSOD it was likely the graphics card because of this I 0x0124 Hardware Error BSOD randomly finally finished school for the year and decided to try to figure out which part was causing the issue so that I could replace it I borrowed a graphics card from a friend and tried swapping it in but my computer continued to BSOD although it did seem to take longer to do so I ran the boot version of memtest for a couple of hours and got no errors but I was planning to run it again overnight at some point to test it further I might be able borrow a processor from a friend this coming weekend out of a computer I built for him which I could swap in to test the processor I attached the dump files as per the posting instructions with the exception of the perfmon report which gave me an error message of quot the interface is unknown quot if anyone knows why that is then I could attach that file too I'm just wondering what tests I can perform to try to figure out what part is causing the issues If you need any other files I will be happy to try to procure them Thank you

A:0x0124 Hardware Error BSOD randomly

The error appears to stem from processor cache failure. While it is memory, it's not memory you can test or replace. You may have indeed damaged the processor core. AMD is not known for throttling on over-temp and will run till they "smoke". You can try a different processor but the motherboard may also be damaged. Try it.

By the way, the error code was 124 - Hardware.

http://www.sevenforums.com/bsod-help-support/233477-0x0124-hardware-error-bsod-randomly.html
Relevancy 61.06%

Today suddenly I get this BSOD while just regular internet use and Autocad and game test This is after I played some Battlefield for minutes - BCCode:a suddenly times. x64 windows occurring multiple BSOD 7 and crashed coz computer is so slow just testing out Than after I restart crashed again with same BSOD when I was just doing internet Help please thank you Computer Spec Sager NP laptop i - QM nVidia GT M MB gb MHz ram intel gb ssd amp gb hard drive quot matt p Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode a BCP BCP BCP BCP FFFFF E F A OS Version Service Pack Product Files that help describe the problem C Windows Minidump - - dmp C Users jahoony AppData Local Temp WER- - sysdata xml Read our privacy statement online Windows Privacy Statement - Microsoft Windows If the online privacy statement is not available please read our privacy statement offline C Windows system en-US erofflps txt

A:windows 7 x64 - BSOD suddenly occurring multiple times. BCCode:a

oh yea. It just popped up so I remembered. but before every time it crashed this window popped up with message:

"AcIntEngine18
Could not write to the Internet cache on your computer. Try the following steps to correct the problem. Open Internet Explorer and click Tool > Internet Options. On the General tab, click Delete Files to delete the temporary Internet files."

But I dont even use Internet explorer, I use firefox. I never saw this message in my life.
I wonder if this has to do with crash.

http://www.sevenforums.com/bsod-help-support/194495-windows-7-x64-bsod-suddenly-occurring-multiple-times-bccode.html
Relevancy 61.06%

Attachment 230815

hey everyone, i'm new to the forums.

this problem has been occurring since the beginning of the year, but i never really came around to addressing the problem until now. my laptop will sometimes shut off (happens randomly as far as i can tell) and reboot itself; upon log in i'll receive a message from windows saying that it shut down unexpectedly, with the "blue screen error" being the culprit. i uploaded the dump files - can anyone please help me figure out what the problem is, and perhaps find a solution? thanks in advance!

A:BSOD error occurs randomly, perhaps a hardware issue?

Welcome aboard.

► Please fill up your system specs.
First, see your system specs and then put those information here.

And let us also know how old the computer is, and if it is still in warranty or not.

► There is Daemon tools installed. A very well known cause of Crashes.

Code:
dtsoftbus01 DAEMON Tools Virtual Bus Driver c:\windows\system32\drivers\dtsoftbus01.sys Kernel Driver Yes Manual Running OK Normal No Yes
Please uninstall it.

► Update the following drivers:
SoundMAX Integrated Digital HD Audio : ADIHdAud.sys
Mobile Intel(R) 4 Series Express Chipset Family : igdkmd32.sys
Broadcom NetLink (TM) Gigabit Ethernet : b57nd60x.sys
► Download ccleaner and perform a system clean.

Inform us with the results, and if there are further dumps, let us know.

http://www.sevenforums.com/bsod-help-support/251842-bsod-error-occurs-randomly-perhaps-hardware-issue.html
Relevancy 61.06%

System info:
- Windows 7 Ultimate x64
- It is the original installed OS on the system
- It is full retail version
- Age of system (hardware) is approximately 6 months
- What is the age of OS installation is approximately 6 months
- I have not re-installed the OS since the initial build.

Suddenly, over the last week, my system has been suffering from BSOD randomly. The system seems to lock up just prior to the BSOD.

I have trying putting it into Safe Mode but the same occurs.

I have run a Memtest and no errors are reported.
I have run an SFC scan and no errors were reported.

My dump file and Perfmon are attached. Any light you can shed on this would be much appreciated.

Thanks

A:BSOD seemingly randomly. No new apps or hardware installed

No DMPS included in upload try this method.

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

If you are overclocking STOP
We could also use some system information, which you can get easily by running msinfo32.
To do that go to start>run>type msinfo32>enter

When it is finished running go to file>save>name it and upload to us here.
You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.



To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

http://www.sevenforums.com/bsod-help-support/225748-bsod-seemingly-randomly-no-new-apps-hardware-installed.html
Relevancy 60.63%

Hello Everyone My desktop is currently running into an issue where it will crash BSOD at random times doing just about any program the screen will basically become jumbled up turn into Lines for a second and then BSOD to the Stop Error I have included the Minidump file JcGriff File and Health and systems Stop Occurring (Time Randomly and 0x000001e Program) Error report Stop Error 0x000001e Occurring Randomly (Time and Program) as per the BSOD posting instructions My Basic system Specs include- Windows Professional x installation itself Stop Error 0x000001e Occurring Randomly (Time and Program) is about years old and its Retail Age of System - Varies Oldest component is years old AMD Phenom II X T newest is only about months Asus DirectCU s Components - AMD Phenom II X T Asus Crosshair IV Formula FX x Asus DirectCU GB DDR x GB x GB x SSD C and M x GB SATA II HDD x DVD CD-RW - R Combo Drives x Rosewill RNX Wireless NIC Also I noticed in the Perfmon it says it cannot detect an Antivirus Program although I do possess one AVG Internet Security Any Help would be Greatly Aprreciated

A:Stop Error 0x000001e Occurring Randomly (Time and Program)

> AVG can be a contributing cause of BSOD'S .
Please remove and replace with Microsoft Security Essentials AT LEAST TO TEST

Download tools and utilities | AVG Worldwide

Microsoft Security Essentials - Free Antivirus for Windows

> These crashes were caused by memory corruption/exception (probably a driver).
Please run these two tests to verify your memory and find which driver is causing the problem.

If you are overclocking anything reset to default before running these tests.
In other words STOP!!!

If you have Raid > update its Driver.
Memtest.





Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.



RAM - Test with Memtest86+

Driver verifier






Quote:
Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

So, I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Special Pool", "Force Pending I/O Requests" and "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen.
Continue to use your system normally, and if you know what causes the crash, do that repeatedly.
The objective here is to get the system to crash because Driver Verifier is stressing the drivers out.
If it doesn't crash for you, then let it run for at least 36 hours of continuous operation.

Reboot into Windows (after the crash) and turn off Driver Verifier by going back in and selecting "Delete existing settings" on the first page, then locate and zip up the memory dump file and upload it with your next post.

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.


Using Driver Verifier to identify issues with Windows drivers for advanced users

http://www.sevenforums.com/bsod-help-support/216803-stop-error-0x000001e-occurring-randomly-time-program.html
Relevancy 57.19%

Alright this problem has been haunting me for a bit My computer has a history of restarting itself to Issues be I hardware suspect becuase of my trusty thermal diode very bad cooling I suppose The motherboard I m using Soltek w an nforce chipset if you need the exact model number I ll dig it up however Issues I suspect to be hardware is a temp job that I paid twenty Issues I suspect to be hardware bucks for I just need some opinions here Issues I suspect to be hardware I had my new video card in for a while and it worked fine GeForce OC from BFGTech Completely sexy It wouldn t much restart at LANs but at home it would throw a fit Now the onboard LAN on this sucker has been known to go out and also throw a fit once and a while so this must be kept in mind After a while It started to abruptly restart and am told by the error codes it was first a driver then a divice driver So I emailed BFGtech support and they told me to uninstall the drivers then clean them in safe mode I do that reinstall the drivers and it appears to work but then begins the same problem I uninstall SP and it works fine for a few days then starts to freeze itself instead of restarting I watched the HDD activity light and it pulsed at a set steady rate So then I end up formatting times trying to diagnose the problem no issue my external hard drive houses all my fun stuff After a while a huge amount of Serious Error boxes popped up and i investigated I was told it was a device driver once again So I did the sensible thing I switched back to my Radeon LE MB and it seemed once again to work fine for a few hours Now it s acting up agian No stop errors yet nothing in the System logs but there probably will be soon like it had been doing Note While I was formatting I had to do the NTFS Quick Format instead During the other format it would restart itself at the next day at Sometimes the thermal die would give me readings close to my shutdown temp and sometimes it would be something like forty degrees beneath That said So I ve isolated that it is NOT my GeForce But I am having troubles still I don t know if it s something with the motherboard an angry hard drive or even if my RAM or Power Supply is not doing the job correctly My Power Supply isn t exactly a name brand job I might want to whip out the multimeter on that perhaps But suggestions are appreciated gt I m at a loss FOLLOW UP BCCode d BCP D BCP FF BCP BCP D OSVer SP Product if that helps That s just the device diver one nbsp

A:Issues I suspect to be hardware

It has been my experience that anytime you get strange and inconsistant problems the first things to check are the powersupply and the RAM.

In this case the first thing I would do is to pull the side and run the machine with a fan blowing in the side to see if it helps. If it does, then heat is part of your problem.

Next I would check the powersupply either with or multimeter or with another known good one.

Third I would try with just one stick of RAM. If you only have one, try a different stick and see if anything changes.
 

https://forums.techguy.org/threads/issues-i-suspect-to-be-hardware.372332/
Relevancy 56.76%

I have been using a cable to connect my PC to an HDTV connecting USB to HDMI hardware? Windows freezing. Using Can randomly HDMI. to USB it be The cable brand is AUVIO It has worked with no problems since I bought it about months ago I recently formatted my PC to it's original factory settings Now Windows freezes at random times for about - seconds then continues as normal I can't view videos on YouTube anymore because of this Or any videos of any kind It sounds as if the drive itself is what freezes Windows randomly freezing. Using USB to HDMI. Can it be hardware? not the OS That makes me think it might have something to do with the PC hardware and not the cable Can it be because I have low memory or a not so great video card Any and all help is appriciated Here are the basic specs for this PC Time of this report Machine name DUBHE-PC Operating System Windows Home Premium -bit Build Service Pack win sp gdr - Language English Regional Setting English System Manufacturer Compaq-Presario Windows randomly freezing. Using USB to HDMI. Can it be hardware? System Model BQ AA-ABA CQ F BIOS Phoenix - AwardBIOS v PG Processor AMD Sempron tm Processor GHz Memory MB RAM Available OS Memory MB RAM Windows randomly freezing. Using USB to HDMI. Can it be hardware? Page File MB used MB available Windows Dir C Windows DirectX Version DirectX DX Setup Parameters Not found User DPI Setting Using System DPI System DPI Setting DPI percent DWM DPI Scaling Disabled DxDiag Version bit Unicode

A:Windows randomly freezing. Using USB to HDMI. Can it be hardware?

Hi the only video driver I can find on the HP site is for 64 bit version of win 7 Original NVIDIA Graphics Driver - Compaq Presario CQ5500F Desktop PC | HP? Support

http://www.techsupportforum.com/forums/f217/windows-randomly-freezing-using-usb-to-hdmi-can-it-be-hardware-688394.html
Relevancy 56.76%

I have a dual boot two hard-drive MSI K A -CF based system One drive has Windows running with all the updates and is incredibly reliable never stops for anything One drive has Windows running and randomly locks up mouse amp keyboard non-functional desktop and open applications still visible Only route out is to hit the rest button on return to operation its as if nothing ever happened including looking in the System logs I suspect the chipset as its clearly somewhat dated or the GPU driver as AMD are flaky with their legacy hardware driver support for new OS's I am thinking if I uninstall the ATI AMD driver and replace the GPU with a more recent Nvidia board with known drivers then perhaps my problem will go away However before I start this process I wanted to see if anyone else had doesn't Win freezes, randomly same hardware 7, Windows 8.1 a view or understanding what could be happening Note there is no hardware change at all between the Win and Win other than the disk that the boot happens from is different Both hard drives are new and are not reporting any issues at all on check disk in SMART anywhere Dave

A:Windows 8.1 randomly freezes, Win 7, same hardware doesn't

Hi,
Welcome to EightForums
I have encountered the same issue when upgrading to Windows 8.1 and it turns out that I have to reconfigure my RAM settings in the BIOS for the frequent freezing to be resolved.

http://www.eightforums.com/general-support/49241-windows-8-1-randomly-freezes-win-7-same-hardware-doesnt.html
Relevancy 56.76%

Hi,
I have 2 hard drives. The first one is windows 7 and the other one is XP. My PC was working perfectly. Before 2 weeks I have installed windows 7 in the XP drive and there wasn't any problem until the last week. My computer started to freeze randomly in both of the drives even in the safe mode and it doesn't starts until I do a restart. I have tried some solutions but they didn't solve my problem. Then, I have formatted both of my drives. However, my PC is still freezing. Is this a hardware problem?

Waiting for your helps...

A:Windows freezing randomly. Is this a hardware problem?

Hello.

I had the same porblem with my computer when i got it a few months ago. And i also had the frezzing problem. I suggest that you download memtest86 to test your RAM. You can find a "how to" Tutorials here

RAM - Test with Memtest86+

http://www.sevenforums.com/bsod-help-support/190908-windows-freezing-randomly-hardware-problem.html
Relevancy 56.76%

I ve been trouble shooting - Freezes Solved: but Suspect XP Hardware, what? my computer s freeze-ups for a couple weeks and I can t find any reason I restored my computer three weeks ago and some time after downloading SP and all the other MS updates it started Problem Computer will freeze completely No keyboard mouse sound I can only force a reset with the power button Sometimes it will freeze within seconds of XP finishing it s startup Freezes can be random Went days without one then six today I know the following Solved: XP Freezes - Suspect Hardware, but what? will cause it to freeze Trying to upload a doc file to google docs Trying to open a doc file in MS Works Trying to upload a MB jpeg as a gmail attachment Uploading a kb jpeg and MB doc file were fine What I ve done Ran every spyware adware virus scan I could Ran two registry check cleaner utilities Disabled all extraneous stuff in msconfig Defragmented hard drive Download Seatools and did all tests on hard drive - all results passed Downloaded a Solved: XP Freezes - Suspect Hardware, but what? Microsoft dos-based memory tester No problems found Removed video card Just Solved: XP Freezes - Suspect Hardware, but what? using integrated video card now Didn t affect problem Used System Restore Ran computer in Safe Mode still freezes Computer HP Pavilion a n AMD Athlon GHz gb Ram Even though the test utilities said the hard disk and memory are fine I suspect it could still be a hardware failure with one or the other Could it possibly be the processor I AM GOING NUTS I guess I m curious if someone has an educated guess what might be going on or some recommendations for testing components Thanks in advance Jeff nbsp

Relevancy 56.76%

Hello - suspect Computer hardware freezing all I ve got mostly all new hardware that Computer freezing - suspect hardware I bought and put together myself I initially installed Windows XP x The system ran fine for about a day but then it started to freeze Unfortunately I can t tie it to any particular activity I ve had it freeze while copying files from an external USB drive and I ve had it freeze while playing a video in Windows Media Player The image on the screen freezes and I get a sort of pixelated shadow image It kind of looks like really poor quality cable TV where the colors are too bright and kind of blurry then the computer becomes completely nonresponsive mouse keyboard don t work - though I am able to turn it off via the power button Sometimes it happens right away and sometimes it ll run fine for an hour or so before it freezes I could be wrong but I don t think I ve seen it freeze when I just leave it idle I have since formatted and installed Windows XP SP x but I m still getting the same problem I ve disconnected all unnecessary hardware though I m stuck with a usb mouse keyboard as opposed to PS I currently have only the default drivers installed I ve tried using the drivers from the NVIDIA disc that came with the mobo but had the same problems I m currently running the system with the side panel removed in hopes that it s not a heat issue I also ran Memtest- v at the default settings from a boot disc It ran for an hour and completed passes with no errors before I stopped it I ve also tried using an old CRT monitor thinking that maybe my flatpanel was the problem still the same problem I m pretty much out of ideas and I d REALLY appreciate any and all advice Thanks in advance Hardware specs Motherboard MSI GF M-P Integrated video sound ethernet CPU AMD Phenom II x Memory Super Talent GB DDR - Single Model W UB GM HDD Seagate Barracuda GB RPM SATA Model ST AS DVD Burner LG super multi SATA can t find the model Logitech USB keyboard Dell USB mouse ProView flat panel monitor connected via VGA nbsp

Relevancy 56.33%

Computer Specs -Manufacturer Cyberpower -Windows Home bit Service Pack Legal copy -Gigabyte socket motherboard unknown model -Intel Core i ghz water cooled by Corsair H -EVGA Nvidia GTX gb - gb Kingston ram specifications and speed unknown - watt Corsair power supply I don't know the other specs but it's brand new and definitely meets the requirements for all of my components - case fans in push pull setup all mm and cfm My Problem I have problems with my computer both of which require me to hold the power button down for seconds to hard reboot and I wait seconds before turning it back on because I heard that was good Computer issue) AND randomly (Hardware signal randomly freezes loses somewhere My computer either A randomly loses signal to the monitor resulting in the monitor going to sleep while my computer is still on When this happens audio from iTunes continues to play normally but I cannot pause it or control the volume which I can usually do from my keyboard This leads me to believe that I have absolutely no Computer randomly freezes AND randomly loses signal (Hardware issue) control over my computer when my computer loses signal with the monitor This can happen at any time when I'm playing a videogame browsing the internet or when the computer is locked and I'm not using it at all B randomly freezes This locks up the computer completely and I am unable to move my mouse or control anything I don't know if audio continues to play because this hasn't occurred while I've been listening to something on iTunes yet This can happen at any time and has even happened before the computer has turned on during the black windows screen before I was prompted to type my password What I know -This is most likely a hardware issue because these issues have been going on since the beginning of the year and I have had multiple reformats since then and have tried to resolve the issue by replacing drivers uninstalling random software and going back to previous versions of patches and drivers before these issues started -This is not an issue with the power supply It has been recently replaced and I have had these issues before and after replacing the power supply -This is not an issue with the RAM same situation as the power supply -This is not an issue with heat because my case has superb air flow and the highest temperature I've seen my CPU at is C while playing a videogame called Guild Wars according to Real Temp -the water cooler has not been leaking What I think -This issue started around the time my power would randomly cut off because of thunderstorms which I think damaged either my Motherboard CPU or Graphics Card could some other part be causing this issue Which do you guys is most likely the problem Could a damaged hard drive possibly be the cause of my problems I'm planning to replace either my motherboard or cpu soon though I think it's most likely caused by the gigabyte motherboard every gigabyte socket motherboard I've seen has gotten terrible reviews on newegg

A:Computer randomly freezes AND randomly loses signal (Hardware issue)

This is my motherboard
GIGABYTE - Motherboard - Socket 1156 - GA-P55M-UD2 (rev. 1.0)
though I'm not sure if mine is rev 1.0 or rev 1.1

I'm hoping that the issue isn't the CPU, Graphics Card, or Hard Drive, as those would cost me the most trouble / money.

Could it be an issue with the BIOS? I don't really know what that is or how it works.

http://www.techsupportforum.com/forums/f299/computer-randomly-freezes-and-randomly-loses-signal-hardware-issue-599199.html
Relevancy 56.33%

Hi I have a fixe pc with intel Q gb ram with vista bit running This pc is not mine but of suspect vista but okay bsod, Windows viruses then a friend of mine who asked me to repair it so i dont know how this has been used The problems started with a bsoad after which i choose the latest good known config After that it started but taking a long break after the loading bar before loading the desktop a coffe brake like min Windows update is giving two important Windows vista bsod, then okay but viruses suspect updates that seems like cannot complete -Security Update for Microsoft NET Framework SP on Windows Vista SP and Windows Server SP x KB -Update for Windows Vista KB In the details on the operative system it states that a service pack update is possible but i read that is good to make it when the system is clean and working well I suspect this pc being full of viruses and right now im running a mbam Windows vista bsod, then okay but viruses suspect scan just so see what it finds and is already at after just min scan So i would need some help to clean deeply and find out why it had a bsod all before updating to service pack e try to give stability to this system Thanksss

A:Windows vista bsod, then okay but viruses suspect

Download Security Check from here or here and save it to your Desktop. Double-click SecurityCheck.exe Follow the onscreen instructions inside of the black box. A Notepad document should open automatically called checkup.txt; please post the contents of that document.NOTE 1. If one of your security applications (e.g., third-party firewall) requests permission to allow DIG.EXE access the Internet, allow it to do so.NOTE 2. SecurityCheck may produce some false warning(s), so leave the results reading to me.NOTE 3. If you receive UNSUPPORTED OPERATING SYSTEM! ABORTED! message restart computer and Security Check should run Please download Farbar Service Scanner (FSS) and run it on the computer with the issue.Make sure the following options are checked:
Internet ServicesWindows FirewallSystem RestoreSecurity Center/Action CenterWindows UpdateWindows DefenderOther ServicesPress "Scan".It will create a log (FSS.txt) in the same directory the tool is run.Please copy and paste the log to your reply. Please download MiniToolBox and run it.Checkmark following boxes:Report IE Proxy SettingsReport FF Proxy SettingsList content of HostsList IP configurationList Winsock EntriesList last 10 Event Viewer logList Installed ProgramsList Devices (do NOT change any settings here)List Users, Partitions and Memory sizeList Restore PointsClick Go and post the result. Please download Malwarebytes Anti-Malware to your desktop.NOTE. If you already have MBAM 2.0 installed scroll down.Double-click mbam-setup-2.0.0.1000.exe and follow the prompts to install the program.
At the end, be sure a checkmark is placed next to the following:

Launch Malwarebytes Anti-MalwareA 14 day trial of the Premium features is pre-selected. You may deselect this if you wish, and it will not diminish the scanning and removal capabilities of the program.
Click Finish.On the Dashboard, click the 'Update Now >>' linkAfter the update completes, click the 'Scan Now >>' button.
Or, on the Dashboard, click the Scan Now >> button.If an update is available, click the Update Now button.
A Threat Scan will begin.When the scan is complete, if there have been detections, click Apply Actions to allow MBAM to clean what was detected.In most cases, a restart will be required.Wait for the prompt to restart the computer to appear, then click on Yes.If you already have MBAM 2.0 installed:On the Dashboard, click the 'Update Now >>' linkAfter the update completes, click the 'Scan Now >>' button.
Or, on the Dashboard, click the Scan Now >> button.If an update is available, click the Update Now button.
A Threat Scan will begin.When the scan is complete, if there have been detections, click Apply Actions to allow MBAM to clean what was detected.In most cases, a restart will be required.Wait for the prompt to restart the computer to appear, then click on Yes.How to get logs:(Export log to save as txt)After the restart once you are back at your desktop, open MBAM once more.Click on the History tab > Application Logs.Double click on the Scan Log which shows the Date and time of the scan just performed.Click 'Export'.Click 'Text file (*.txt)'In the Save File dialog box which appears, click on Desktop.In the File name: box type a name for your scan log.A message box named 'File Saved' should appear stating "Your file has been successfully exported".Click OkAttach that saved log to your next reply.(Copy to clipboard for pasting into forum replies or tickets)After the restart once you are back at your desktop, open MBAM once more.Click on the History tab > Application Logs.Double click on the scan log which shows the Date and time of the scan just performed.Click 'Copy to Clipboard'Paste the contents of the clipboard into your reply.Download Malwarebytes Anti-Rootkit to your desktop.Warning! Malwarebytes Anti-Rootkit needs to be run from an account with administrator rights.Double click on downloaded file. OK self extracting prompt.MBAR will start. Click "Next" to c... Read more

http://www.bleepingcomputer.com/forums/t/550529/windows-vista-bsod-then-okay-but-viruses-suspect/
Relevancy 55.9%

Hi Guys:

I have a computer running XP SP2 that randomly restarts with errors in the log file that lead me to think that it might be a root kit infection

MS Tech notes lead me to this after searching on

Error code 1000000a, parameter1 00000000, parameter2 00000002, parameter3 00000001, parameter4 805219f0.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

From the event log.

The PC is running Nortons 360 but something might have slipped through?

What should I do to look at what is causing this?

Thanks

A:Computer restarts randomly - suspect malware

Hello.Please download BlueScreenView to your Desktop.Double click on BlueScreenView.exe to run the program.When scanning is done, go to Edit>Select All.Go to File>Save Selected Items, and save the report as BSOD.txt.Open BSOD.txt in Notepad, copy all content, and paste it into your next reply.~Blade

http://www.bleepingcomputer.com/forums/t/450385/computer-restarts-randomly-suspect-malware/
Relevancy 55.47%

Howdy everyone So my situation seems pretty sticky at the moment I have a home built machine that has been blue screening pretty consistently for the past few weeks no loss of hard drive material I had scanned for malware updated drivers and restored the system to what i perceived a stable restore point These things did not solve the issue so I was then led to testing to see if the memory Suspect Motherboard Hardware Mystery Memory or Issue- was faulty By recommendation of other threads on this site I downloaded memtest to scan the memory sticks My initial scan of all sticks came back with an overwhelming number of errors ish which then led me to test each individual stick Stick scanned with no errors in the first memory slot Stick scanned with no errors in the first memory slot I was subbing each one in the first slot After putting in Mystery Hardware Issue- Suspect Motherboard or Memory the rd stick and powering the machine disappointingly there was no display on the monitor The monitor light was flashing it was receiving power yet no signal from the machine Since then I have tried most every combination of memory sticks hoping that it was some Mystery Hardware Issue- Suspect Motherboard or Memory sort of connection issue but with the same Mystery Hardware Issue- Suspect Motherboard or Memory negative results- no display The machine is receiving power the motherboard is lit and fans are going yet the monitor remains on standby I am unable to do most troubleshooting as I am without any visibility to diagnose My machine is a home built original with the following components Windows Professional b Processor CPU INTEL CORE I G M R Memory Gx CORSAIR CML GX M A C B Hard Drive T HITACHI HDS BLA K - Power supply SEASONIC SS- KM ACTIVE PFC F Motherboard ASUS P P DELUXE REV P Video Card VGA PNY VCQ -PB RT I am sure that I am forgetting some information to share but any and all help is GREATLY APPRECIATED

A:Mystery Hardware Issue- Suspect Motherboard or Memory

I reposted in internal hardware because i thought it was more appropriate:

http://www.bleepingcomputer.com/forums/topic454100.html

http://www.bleepingcomputer.com/forums/t/454097/mystery-hardware-issue-suspect-motherboard-or-memory/
Relevancy 55.47%

Hi my sister brought a Toshiba suspect (I Multiple Blue screens hardware failure) Satellite T - L and recently just encountered a multiple of blue screens following with a windows system recovery menu since it would no longer boot into windows Since the laptop is a small one with no disk drive toshiba recommended to use Multiple Blue screens (I suspect hardware failure) their inbuilt toshiba hdd windows recovery system to install a fresh build of windows onto the C drive as we cant use the boot from disc method Once finished we could actually boot into windows however some drivers were missing such Multiple Blue screens (I suspect hardware failure) as the wireless driver so had to install that myself However within mins another series of bluescreens come up Since it has a fresh install of windows and thus should not be maleware or virus related could it be hardware related instead Also when removing programs the bluescreens occur and when trying to play media files it comes up with server execution failed Here as some of the dmp files in a zip Thank you for ANY help what so ever will be greatly appreciated

A:Multiple Blue screens (I suspect hardware failure)

Hi, you can get the drivers from toshiba's website for the wireless nic and any other hardware you may need. That is a good place to start. Go into device manager by right clicking on the "computer" icon and clicking on "manage". Basically anything that you see a yellow exlamation mark next too probably needs drivers. Also, were you able to catch what the blue screen said at all? Also, did you check event viewer to see if there was an error logged?

Hope that helps

http://www.techsupportforum.com/forums/f299/multiple-blue-screens-i-suspect-hardware-failure-569023.html
Relevancy 55.47%

It was a slow degradation that Pavillion hardware Dv2410US up..suspect after must HP freezes it booting now be at first freezing up after a while working on computer Gradually got it worse so that would not even get to the point of loading windows Over a period of time I had removed many small programs and anything I felt could be causing a conflict Scans did not reveal any serious malware Computer had been protected with regularly updated anti-virus AMG and I also had various anti-spyware programs Things done After increasing problems during bootup It said to do a system recovery using the HP Pavillion Dv2410US freezes after booting up..suspect now that it must be hardware last restore point It tried It could not be HP Pavillion Dv2410US freezes after booting up..suspect now that it must be hardware done Message said the repairs could not be done automatically Ran Microsoft Diagnostics at bootup No errors were returned and message said said it was an unspecified system configuration problem Using the HP system recovery disk I installed a fresh copy of Vista Home premium When finally on the desktop I tried to stop one of the gadgets and the system froze and rebooted The next time I waited a long while to be sure it had finished all processing and then proceeded to set up the first user I got as far as trying to enter the user name It froze up and then rebooted It does not qppear to be the hard drive as I was able to boot up in safe mode and copy some files to an external hard drive before doing the new install What kind of hardware could be causing it to freeze up like that It can t be a system configuration problem as indicated before because this was a completely new install and the symptoms were exactly the same as they had been originally What is peculiar is that it starts and stops before it totally freezes up The cursor first begins reacting very slowly and then not at all After a while the system reboots There was only one system recovery disk It appears that some drivers are missing including the service to connect to the wireless router for the internet What would you suspect to be causing the problem nbsp

https://forums.techguy.org/threads/hp-pavillion-dv2410us-freezes-after-booting-up-suspect-now-that-it-must-be-hardware.912807/
Relevancy 55.47%

Hi, and thank you for taking your time to help me

So each night I take my computer along with monitors etc. out of the power plug in the wall.
When I but the power plug back in to start the computer up, my keyboard instantly powers on, the same goes with my two monitors.
When I then turn on the computer nothing really happens. All of the fans and lights turn on (The MoBo fan spins insanely), but nothing comes on the monitor screen. The monitors keeps searching for a unit but won't find the computer.

Sometimes after waiting a few minutes the screen suddenly shows the startup of windows and I can use it normally.

I think it's an hardware related problem but I'm not entirely sure.
I use windows 10.

Hope you can help me
Johan, Denmark
 

https://forums.techguy.org/threads/computer-boot-problems-suspect-hardware-fault.1169961/
Relevancy 54.61%

G day Warning Depressed as F so sorry if I come off distasteful I keep getting a BSOD crash on every load It gets to the windows logo the one that shines and the screen goes black and the tower goes quiet Then it BSOD's Display failed to reboot Says a massive string of 's and BSOD logo. after virus. windows Atikdmag.sys on Suspect relat. booting mixed letters The something about atikmdag sys or something close After that it comes out with FFFFF F EFC at base something something FFFFF D this part changes slightly BSOD on booting after windows logo. Atikdmag.sys relat. Suspect virus. each time more numbers DATESTAMP I've had this problem for a month or two and I think the problem may be a virus I downloaded a file called quot Early game development quot from chan I can hear your lecture now don't worry Which is apparently lingo for quot confirmed virus quot A reference to Lostboy exe if that helps This instantly copied a file onto every hard drive I have in the base root folder I dont recall what it was called I instantly deleted them A few days later I got the BSOD I tried several time to start it All failed the same way I couldnt figure it out so I Recovered my PC to the previous month This fixed it --------------- A few days later it crashed again Again it didn't start several times I went into safe mode and scoured the windows folders In windows or system or something I found a folder system W A L M A R T and a dll file or two I deleted that and it worked again --------------- A few days later it crashed again Again it didn't start several times I went into safe mode with networking to search the net I found out ATI cards suck dehydrated anus Lots of atikdmag sys errors I went on BleepingComputer com and found a 'very' similar problem Solution was just downloading antivirus software Emisoft-Anti malware Ran a scan and it found viruses Got them quarantined This fixed the problem --------------- A few days later it crashed again Again it didn't start several times Emisoft got more from safe mode Didn't help Now I am here Sorry for the wall of text Any help would be much appreciated

A:BSOD on booting after windows logo. Atikdmag.sys relat. Suspect virus.

What ever is causing this, it has emptied your event log. Im looking into this now.

http://www.sevenforums.com/bsod-help-support/336461-bsod-booting-after-windows-logo-atikdmag-sys-relat-suspect-virus.html
Relevancy 54.61%

Hi everyone was looking for some help regarding BSOD on windows lot please? occurring Any BSOD a help I have a HP G laptop running windows bought with windows installed and its getting BSOD a lot Its frustrating as it interferes with my work web designer and I cannot carry on I used to get the BSOD before but my screen would just go black or grey and I would have to shut down by holding the power button This only seemed to happen when I was running on the battery as soon as it was plugged in to the mains I never had any issues Now I am getting it whilst its plugged in I have ran seaTools and the short drive self test comes back as Any help please? BSOD occurring a lot a fail with the long generic test I got BSOD I don't have any external usb devices attached I have used the sf diagnostic tool and chose grab all I have attached the zip file to this post Any help would be greatly appreciated

A:Any help please? BSOD occurring a lot

It sounds as if your hard drive is dead/dying. Please backup your data IMMEDIATELY!!!
You can try to run the tests inside of Windows (either use the Seagate Seatools for Windows or the Western Digital Data LifeGuard for Windows)
Depending on how you installed Win8, you may have left the HP system diagnostics on the system. Check the BIOS options when you boot up.

If you haven't created Recovery Disks - do so now! You may also need the HP Win7 recovery disks if the Win8 install was an upgrade.

There are enough signs here that I have to wonder about this installation. Should this be a pirated copy of Windows, please be aware that we may not be able to fix it (as the hacks that were done to activate it will cause the OS to behave differently than we expect it to). If that's the case, our efforts to help may just waste your time. Secondly, the forum rules prohibit assisting with pirated software - so the topic would be closed if that is the case.

Daemon Tools (and Alcohol % software) are known to cause BSOD's on some Windows systems (mostly due to the sptd.sys driver, although I have seen dtsoftbus01.sys blamed on several occasions).





Please un-install the program, then use the following free tool to ensure that the troublesome sptd.sys driver is removed from your system (pick the 32 or 64 bit system depending on your system's configuration): [S] DuplexSecure - FAQ [/S] Link broken as of 21 Jul 2012
New link (15 Aug 2012): DuplexSecure - Downloads (pick the appropriate version for your system and select "Un-install" when you run it).
Alternate link: Disc-Tools.com
Manual procedure here: Registry and SPTD problems | DAEMON Pro Help



3 out of 4 memory dumps blame
amdsata.sys Wed Oct 7 16:13:09 2009 (4ACCF655) AMD AHCI 1.2 Device Driver
Please update your AMD chipset drivers immediately.

Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable! :

wacommousefilter.sys Fri Feb 16 13:12:17 2007 (45D5F401)
Wacom(tablet) Mouse Filter
http://www.carrona.org/drivers/driver.php?id=wacommousefilter.sys

PxHlpa64.sys Tue Jun 23 19:16:35 2009 (4A416253)
Sonic CD/DVD driver (used by many different CD/DVD programs)
http://www.carrona.org/drivers/driver.php?id=PxHlpa64.sys

wacomvhid.sys Mon Sep 21 19:29:14 2009 (4AB80C4A)
Wacom Virtual HID Device Driver
http://www.carrona.org/drivers/driver.php?id=wacomvhid.sys

amdsata.sys Wed Oct 7 16:13:09 2009 (4ACCF655)
AMD AHCI 1.2 Device Driver
http://www.carrona.org/drivers/driver.php?id=amdsata.sys

amdxata.sys Wed Oct 7 16:13:10 2009 (4ACCF656)
AMD storage controller driver - usually from the Windows 7 DVD
http://www.carrona.org/drivers/driver.php?id=amdxata.sys

usbfilter.sys Tue Dec 22 03:26:22 2009 (4B3082AE)
AMD USB Filter Driver (likely part of the chipset drivers)
http://www.carrona.org/drivers/driver.php?id=usbfilter.sys

AtiHdmi.sys Tue Mar 9 05:08:38 2010 (4B961E26)
ATI High Definition Audio Function Driver
http://www.carrona.org/drivers/driver.php?id=AtiHdmi.sys

RTKVHD64.sys Fri Mar 12 16:47:03 2010 (4B9AB657)
Realtek High Definition Audio Function Driver
http://www.carrona.org/drivers/driver.php?id=RTKVHD64.sys

btmusb.sys Tue Feb 8 11:02:04 2011 (4D5168FC)
Ralink/Motorola BC4 Bluetooth 3.0 + HS Adapter Driver (HP)
http://www.carrona.org/drivers/driver.php?id=btmusb.sys

tap0901.sys Thu Mar 24 17:20:03 2011 (4D8BB583)
OpenVPN driver or COMODO
http://www.carrona.org/drivers/driver.php?id=tap0901.sys

SASKUTIL64.SYS Tue Jul 12 17:00:01 2011 (4E1CB5D1)
SUPERAntiSpyware
http://www.carrona.org/drivers/driver.php?i... Read more

http://www.eightforums.com/bsod-crashes-debugging/26710-any-help-please-bsod-occurring-lot.html
Relevancy 54.61%

A similar post was submitted some time back about why the HomeGroup Icon just randomly showed up on my Desktop (click

here for the previous thread).  Disabling the services removed the icon for me since I've never used HomeGroup, but I want to know... is the following a default for the HomeGroup Provider service?  I have noticed that other services log on
to "This account:" as well, but it's just concerning since this icon just randomly showed up.  Also, does anyone know why this happens randomly when you don't use HomeGroup?  I have a friends laptop on my guest network - not on my private
network where my PC resides.  I suppose this could be the link.  Can anyone confirm that?  I don't like it, but I could understand that HomeGroup's ease of use would be a reason that Microsoft would allow this happen.  Please confirm.


https://social.technet.microsoft.com/Forums/en-US/64d8cc49-17eb-4b70-969f-8639a0bb3f2e/home-group-icon-just-randomly-showed-up-on-my-desktop-why-seems-suspect?forum=w8itpronetworking
Relevancy 54.18%

Greetings I have tried Kaspersky Spybot and Malwarebytes in Safe Mode Only Kaspersky found Trojan-Clicker Win Cycler gen and Trojan-Downloader JS Agent fnp files Random Clicker.Win32 Trojan plays suspect randomly, audio and others It said it disinfected it but the random audio ads and mouse-clicks still occur I have deleted all my user account Temp Random audio plays randomly, Trojan Clicker.Win32 suspect files not the Windows ones It is maddening Here is my Random audio plays randomly, Trojan Clicker.Win32 suspect DDS txt file DDS Ver - - - NTFSx Run by Brian Rogers at on Thu Internet Explorer BrowserJavaVersion Microsoft Windows XP Home Edition GMT - Running Processes C WINDOWSsystem svchost -k DcomLaunchsvchost exeC WINDOWSSystem svchost exe -k netsvcssvchost exesvchost exesvchost exe C WINDOWSExplorer EXEC WINDOWSsystem spoolsv exeC WINDOWSsystem tbctray exeC WINDOWSsystem ctfmon exesvchost exe svchost exeC Program FilesJavajre binjqs exeC WINDOWSsystem nvsvc exeC WINDOWSSystem svchost exe -k imgsvcC WINDOWSSystem svchost exe -k HTTPFilterC Program FilesOperaopera exeC Documents and SettingsBrian RogersDesktopdds scr Pseudo HJT Report uStart Page hxxp students animationmentor com main mainBHO Adobe PDF Link Helper df c-e ad- -a -fa c ebdc - c program filescommon filesadobeacrobatactivexAcroIEHelperShim dllBHO Spybot-S amp D IE Protection - f - d - - d f - c progra spybot SDHelper dllBHO Java Plug-In SSV Helper dbc -a - b-bc - c c c a - c program filesjavajre binjp ssv dllBHO JQSIEStartDetectorImpl Class e e f - ce- c -bc -eabfe f c - c program filesjavajre libdeployjqsiejqs plugin dllTB D C F- A- -A AD- D - No FileEB - a - b-a - c a a - No FileuRun ctfmon exe c windowssystem ctfmon exemRun NvCplDaemon RUNDLL EXE c windowssystem NvCpl dll NvStartupmRun nwiz nwiz exe installmRun NvMediaCenter RUNDLL EXE c windowssystem NvMcTray dll NvTaskbarInitmRun Kernel and Hardware Abstraction Layer KHALMNPR EXEmRun TraySantaCruz c windowssystem tbctray exeIE Google Sidewiki - c program filesgooglegoogle toolbarcomponentGoogleToolbarDynamic mui en D FF C D BF dll cmsidewiki htmlIE e e dd -d - - b -f ba - windir Network Diagnosticxpnetdiag exeIE FB F -F - d -BB E- C F - c program filesmessengermsmsgs exeIE DFB A - F - C -A - CAB FD A - - F - D - - D F - c progra spybot SDHelper dllTrusted Zone animationmentor comstudentsTrusted Zone animationmentor comwwwTrusted Zone gotomeeting comwww DPF DC E C- A- BD - A -CDF CE CF - hxxp download microsoft com download D D F F- C - - D -D EA pmupd exeDPF B-B - D-A D -FCFDF E C - hxxp www update microsoft com windowsupdate v V Controls en x client wuweb site cab DPF E A- D- EE - C-DC FA D FC - hxxp update microsoft com microsoftupdate v V Controls en x client muweb site cab DPF F C-E A- C-B - B ABEEAC - hxxps h www hp com ediags dex secure HPDEXAXO cabDPF AD C - E- D -B E - F D - hxxp java sun com update jinstall- -windows-i cabDPF BBDC D- B - EE- E - B A FAE - hxxps www gotomeeting com default applets g mdlax cabDPF FFBE D- C C- - BD- DC B C - hxxp fpdownload macromedia com get flashplayer current polarbear ultrashim cabDPF A F D EC- D A- A -BD -FBD BAD D - hxxp h www hp com ediags dd install HPDriverDiagnosticsxp k cabDPF CAFEEFAC- - - -ABCDEFFEDCBA - hxxp java sun com update jinstall- -windows-i cabDPF CAFEEFAC- - - -ABCDEFFEDCBA - hxxp java sun com update jinstall- -windows-i cabDPF CAFEEFAC-FFFF-FFFF-FFFF-ABCDEFFEDCBA - hxxp java sun com update jinstall- -windows-i cabDPF D CDB E-AE D- CF- B - - hxxp fpdownload macromedia com get shockwave cabs flash swflash cabHandler skype com - FFC B - B - DFF- - C DD F D - c progra common skypeSKYPE DLLNotify LBTWlgn - c program filescommon fileslogitechbluetoothLBTWlgn dllSSODL WPDShServiceObj - AAA BA- A C- B - D - D DB - c windowssystem WPDShServiceObj dllHosts www spywareinfo com FIREFOX FF - ProfilePath - c docume brianr applic mozillafirefoxprofiles ia lyjl defaultFF - prefs js browser startup homepage - hxxp students animationmentor com main mainFF - pl... Read more

A:Random audio plays randomly, Trojan Clicker.Win32 suspect

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. Please include a clear description of the problems you're having, along with any steps you may have performed so far.Please refrain from running tools or applying updates other than those we suggest while we are cleaning up your computer. The reason for this is so we know what is going on with the machine at any time. Some programs can interfere with others and hamper the recovery process.Even if you have already provided information about your PC, we need a new log to see what has changed since you originally posted your problem.We need to create an OTL ReportPlease download OTL from one of the following mirrors:This is THE MirrorSave it to your desktop.Double click on the icon on your desktop.Click the "Scan All Users" checkbox.In the custom scan box paste the following:CODEmsconfigsafebootminimalactivexdrivers32netsvcs%SYSTEMDRIVE%\*.exe/md5starteventlog.dllscecli.dllnetlogon.dllcngaudit.dllsceclt.dllntelogon.dlllogevent.dlliaStor.sysnvstor.sysatapi.sysIdeChnDr.sysviasraid.sysAGP440.sysvaxscsi.sysnvatabus.sysviamraid.sysnvata.sysnvgts.sysiastorv.sysViPrt.syseNetHook.dllahcix86.sysKR10N.sysnvstor32.sysahcix86s.sysnvrd32.syssymmpi.sysadp3132.sysmv61xx.sysnvraid.sys/md5stop%systemroot%\*. /mp /s%systemroot%\system32\*.dll /lockedfiles%systemroot%\Tasks\*.job /lockedfiles%systemroot%\system32\drivers\*.sys /lockedfiles%systemroot%\System32\config\*.sav%systemroot%\system32\drivers\*.sys /90Push the button.Two reports will open, copy and paste them in a reply here:OTL.txt <-- Will be openedExtra.txt<--Will be minimizedIn the upper right hand corner of the topic you will see a button called Options. If you click on this in the drop-down menu you can choose Track this topic. I suggest you do this and select Immediate E-Mail notification and click on Proceed. This way you will be advised when we respond to your topic and facilitate the cleaning of your machine.After 5 days if a topic is not replied to we assume it has been abandoned and it is closed.regards myrti

http://www.bleepingcomputer.com/forums/t/341359/random-audio-plays-randomly-trojan-clickerwin32-suspect/
Relevancy 54.18%

I have been following several threads on this board for two months and just want to thank all those who have put out ideas on how to fix the harder BSOD causes.

A couple of things to mention:
Before my first BSOD occurred a couple of months ago, my system ran perfectly for four years with no problems.
Last month, I replaced my Samsung 840 Pro system SSD drive with the newer 850 pro model, but the BSOD's came back after a week.
I am currently running Driver Verifier (without it, the minidump never gets created).
I am currently running Memtest +86.
Any help appreciated, thanks!

A:BSOD occurring under different situations

Update: I ran memtest86 for a few hours with no errors.

Any suggestions...?

http://www.sevenforums.com/bsod-help-support/353630-bsod-occurring-under-different-situations.html
Relevancy 54.18%

Hello, I am getting various BSOD. Mostly it is of the 0X1A variety. It usually happen shortly after I login to Windows 7. My wife gets it, also, when she logs in to her user. However, I recently recieved an 0x3B BSOD while signing up for this forum. I think I have all my drivers up to date. Any and all help would be appreciated.
I have a custom built PC
ASUS Z87-Plus MB
I5-4400 3.1GHz Processor
8GB G-skill DDR3 PC3 12800 memory
Samsung 840 SSD 500GB and 2 1TB SATA
LG Blu-ray
Gigabyte NVidia GTX 660 2GB video card
Window 7 Home Premium 64Bit
Avast for virus

Thank you,
Terry

A:Various BSOD occurring ramdomly

Anyone? Please! What other info do you need?
Terry

http://www.sevenforums.com/bsod-help-support/352254-various-bsod-occurring-ramdomly.html
Relevancy 54.18%

Hi I have several re-occurring BSOD and was hoping I could get assistance last crashes were Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode c BCP BCP BCP FFFFFA CC BCP OS Version Service Pack Product Files that help describe the problem C Windows Minidump - - BSOD re-occurring crashes dmp C Users mmosler SEQUENT AppData Local Temp WER- - sysdata xml Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode b BCP C BCP FFFFF DC re-occurring BSOD crashes BCP FFFFF D CD BCP OS Version Service Pack Product Files that help describe the problem C Windows Minidump - - dmp C Users mmosler SEQUENT AppData Local Temp WER- - sysdata xml roblem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode b BCP C BCP FFFFF DA BCP FFFFF B BCP OS Version Service Pack Product Files that help describe the problem C Windows Minidump - - dmp C Users mmosler SEQUENT AppData Local Temp WER- - sysdata xml

http://www.sevenforums.com/bsod-help-support/379806-re-occurring-bsod-crashes.html
Relevancy 54.18%

Hi, i have been getting more and more bsod, they are occurring more frequently.

Computer Specs:
Mobo: Asus M2N-SLI Deluxe
CPU: AMD Athlon 64 X2, 3.0 Ghz 6000+
CPU Cooler: Xigmatek Thor's Hammer S126384
PSU: Corsair CX 430W
Mem: Corsair XMS2 CM2X2048-6400C5 ( 4Gb )
GPU: GeForce 210
Hdd: Samsung 320Gb & Samsung 1Tb
LaCie Minimus USB 3.0 2TB
Genuine Windows 7 Ultimate 64bit.

I have uploaded 3 files

The
Dm log collector.
BlueScreenViewer report.
A screenshot from everest ultimate edition to view temps.

System is not overclocked.
There are no warning triangles in windows 7 device manager.
Computer is used mostly for Plex, utorrent & storage.
Recent hardware installed is Silverstone Silverstone SST-EC04-P USB 3

I gues that the bsod is somehow related to the usb 3.0 card from silverstone, but i hope not.
Any advice is appreciated.

Kind Regards: Mike

A:Random BSOD occurring

Hello xTL

One BSOD points to Network driver which is outdated and another points to your Video card.


Code:
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
nvlddmkm+0x218a88
Let start by removing and then downloading the drivers again. Follow the guide below. Pay close attention to Step 7 (Notes and warning)
NVIDIA Drivers - Avoid Problems

Most recent Geforce Driver
NVIDIA DRIVERS GeForce 341.44 Driver WHQL

Also, your Network driver is outdated


Code:
*** WARNING: Unable to verify timestamp for nvmf6264.sys
*** ERROR: Module load completed but symbols could not be loaded for nvmf6264.sys
nvmf6264+0xcc63

Code:
Loaded symbol image file: nvmf6264.sys
Image path: \SystemRoot\system32\DRIVERS\nvmf6264.sys
Image name: nvmf6264.sys
Timestamp: Thu Mar 04 20:04:39 2010 (4B9058A7)
CheckSum: 000565B2
ImageSize: 00053A80
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Try updating that driver with the one below
NVIDIA DRIVERS nForce Driver Version 15.56 WHQL

Ensure you have all the most current updates for your Motherboard
Motherboards - M2N-SLI Deluxe - ASUS

If those two things don't work, try uninstalling your antivirus and downloading/installing Microsoft Security Essentials
Microsoft Security Essentials - Microsoft Windows

Report back with the results.

http://www.sevenforums.com/bsod-help-support/365076-random-bsod-occurring.html
Relevancy 54.18%

Lately I ve been getting the BSOD on my almost-new computer running Vista Here is what I m getting KERNEL DATA INPAGE ERROR Disable BIOS memory options caching or shadowing STOP x A xFFFFF tried what I occurring, can... Solved: BSOD FC XFFFFFFFFC X ID XFFFFF C E I also got this one before but I m getting the KERNEL one now Driver IRQL NOT LESS OR Equal Here are my specs Motherboard EVGA SLI NFORCE I LGA FSB INTEL CORE DUO GHZ GB SATA II GB MB RPM GB Solved: BSOD occurring, tried what I can... PC DDR GIGABYTE G MBP WIRELESS PCI WINDOW VISTA HOME PREMIUM BIT with SP I have run CMD CHKDSK F R no bad sectors found some bad data but that didn t fix it I ran the memory test provided in Vista too mdsched exe No memory errors And I did a thorough virus scan with AVG Free I don t know what to try now so any help is GREATLY appreciated I may look like a new member but I m a previous member and supporter who changed her e-mail awhile ago and can t recall her sign-in I am now researching where to find a memory dump log so I can attach it if that s possible nbsp

Relevancy 54.18%

Yesterday night, a BSoD occurred out of nowhere. I was scared ********. BSoD forced reboot and happened again after 3-4 minutes boot up. Then for the last 10 boot ups this has happened over and over again.

Here is what my 'Problem Reports and Solutions' says:

Problem signature
Problem Event Name: BlueScreen
OS Version: 6.0.6001.2.1.0.768.3
Locale ID: 1033

Files that may help describe the problem
Mini020909-01.dmp
sysdata.xml
Version.txt

Extra information about the problem:

BCCode: 1000008e
BCP1: C0000005
BCP2: 00000000
BCP3: 9D696A48
BCP4: 00000000
OS Version: 6_0_6001
Service Pack: 1_0
Product: 768_1

I'm on my Macbook atm. I just copied that over here. Uhm, my computer is in "Safe Mode" Is there any way to fix this problem?

A:Constant BSoD occurring out of nowhere

hi go here http://oca.microsoft.com/en/windiag.asp dl and burn to a disc then run for a few hours and test your memory

http://www.techsupportforum.com/forums/f299/constant-bsod-occurring-out-of-nowhere-344660.html
Relevancy 54.18%

BSOD'S were less frequent before I installed a new motherboard and cpu, I suspect it may have something to do with the ram relevant files attached

http://www.sevenforums.com/bsod-help-support/388937-bsods-occurring-random.html
Relevancy 54.18%

Hi there I've been having some BSOD issues for over a month now and I have yet to find a solution Partly because I'm not sure what the Occurring BSOD's Random root of the problem is in the first place So Random BSOD's Occurring far since the issue started this computer has been completely restored twice and it had also been in the hands of a licensed HP technician for a while a couple weeks ago The guy told me that he ran stress tests and all sorts of things but couldn't find any issues The BSOD's have been occurring very randomly though since the first time it happened One night I was away from my computer and when I got back to it I noticed it rebooting And then it told me Random BSOD's Occurring it recovered from a Blue Screen error Random BSOD's Occurring That was the first time I got it on this computer Since then it's happened off and on The times it happens most often not the ONLY time though is when I play a game called 'Minecraft' which I also may add is a java-based game Sometimes I can have the game running for hours with no trouble And other times I'm lucky to even get minutes out of it before the computer BSOD's I know for a fact my Java is completely up to date And this computer was purchased in December so it's pretty much brand new It's an HP and is currently running Windows Home Premium bit I take good care of my stuff so I don't think it's from me doing anything stupid I have a feeling it's just something silly I'm not noticing or a hardware fault that has so far been flying under the radar Even if it was a hardware fault I would think I'd be having a lot more trouble than I am now But I'm hardly an expert when it comes to this sort of thing so I attached the most recent dump file to this post hoping someone can help me analyze it I'd attach some others but for some reason they aren't there now after the latest crash which was today After of which caused yet another BSOD while Windows was loading Then I had to perform startup repair in order to get it to boot But yeah if I can just get an idea of what the problem is that'd be a huge step forward I want to finally solve this problem once and for all hopefully without having to get the whole computer replaced To anyone who reads or replies to this I thank you in advance

A:Random BSOD's Occurring

Hello,
Please run Driver Verifier: Driver Verifier - Enable and Disable
It will find the faulty driver - and then cause a BSOD. Please get a few BSODs and then upload those dumps.

Regards...

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 4A, {77221dea, 2, 0, fffff8800275dca0}

Probably caused by : ntkrnlmp.exe ( nt!KiSystemServiceExit+245 )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

IRQL_GT_ZERO_AT_SYSTEM_SERVICE (4a)
Returning to usermode from a system call at an IRQL > PASSIVE_LEVEL.
Arguments:
Arg1: 0000000077221dea, Address of system function (system call routine)
Arg2: 0000000000000002, Current IRQL
Arg3: 0000000000000000, 0
Arg4: fffff8800275dca0, 0

Debugging Details:
------------------
PROCESS_NAME: wininit.exe

BUGCHECK_STR: RAISED_IRQL_FAULT

FAULTING_IP:
+69272faf0321db54
00000000`77221dea c3 ret

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

CURRENT_IRQL: 2

LAST_CONTROL_TRANSFER: from fffff80002ad3be9 to fffff80002ad4640

STACK_TEXT:
fffff880`0275da68 fffff800`02ad3be9 : 00000000`0000004a 00000000`77221dea 00000000`00000002 00000000`00000000 : nt!KeBugCheckEx
fffff880`0275da70 fffff800`02ad3b20 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiBugCheckDispatch+0x69
fffff880`0275dbb0 00000000`77221dea : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceExit+0x245
00000000`0014e7a8 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x77221dea
STACK_COMMAND: kb

FOLLOWUP_IP:
nt!KiSystemServiceExit+245
fffff800`02ad3b20 4883ec50 sub rsp,50h

SYMBOL_STACK_INDEX: 2

SYMBOL_NAME: nt!KiSystemServiceExit+245

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: nt

IMAGE_NAME: ntkrnlmp.exe

DEBUG_FLR_IMAGE_TIMESTAMP: 4ce7951a

FAILURE_BUCKET_ID: X64_RAISED_IRQL_FAULT_wininit.exe_nt!KiSystemServiceExit+245

BUCKET_ID: X64_RAISED_IRQL_FAULT_wininit.exe_nt!KiSystemServiceExit+245

Followup: MachineOwner
---------

0: kd> lmtsmn
start end module name
fffff880`00e79000 fffff880`00ed0000 ACPI ACPI.sys Sat Nov 20 22:19:16 2010 (4CE79294)
fffff880`03ae1000 fffff880`03b6a000 afd afd.sys Sat Nov 20 22:23:27 2010 (4CE7938F)
fffff880`03c56000 fffff880`03c6c000 AgileVpn AgileVpn.sys Tue Jul 14 12:10:24 2009 (4A5BCCF0)
fffff880`02c82000 fffff880`02c96000 amdiox64 amdiox64.sys Fri Feb 19 04:17:53 2010 (4B7D5A21)
fffff880`011e9000 fffff880`011fe000 amdppm amdppm.sys Tue Jul 14 11:19:25 2009 (4A5BC0FD)
fffff880`00fc3000 fffff880`00fd7000 amdsata amdsata.sys Sat Feb 06 15:03:55 2010 (4B6CCE0B)
fffff880`00e63000 fffff880`00e6e000 amdxata amdxata.sys Sat Feb 06 15:03:57 2010 (4B6CCE0D)
fffff880`048eb000 fffff880`051e7000 atikmdag atikmdag.sys Thu Jan 27 11:48:28 2011 (4D40A4BC)
fffff880`03cbc000 fffff880`03d0a000 atikmpag atikmpag.sys Thu Jan 27 11:13:33 2011 (4D409C8D)
fffff880`01680000 fffff880`01688000 AtiPcie64 AtiPcie64.sys Thu Mar 11 03:33:45 2010 (4B97ADC9)
fffff880`016c7000 fffff880`016ce000 Beep Beep.SYS Tue Jul 14 12:00:13 2009 (4A5BCA8D)
fffff880`0... Read more

http://www.sevenforums.com/bsod-help-support/147706-random-bsods-occurring.html