Windows Support Forum

BSOD whilst PC is idle. Locale ID 2057

Q: BSOD whilst PC is idle. Locale ID 2057

My desktop PC crashes with a BSOD when it's not being used. It is on 24/7 and is fine most of the time but gets a BSOD about once a day. The time varies and I can't see anything starting up at that time. I've run Windows memory checker from the startup disk and chkdsk. All come back clear. I tried using an earlier version of my GeForce 520 video driver but that made no difference. Can anyone help please? I've attached the SF file. I have the minidump files available too if needed.

Relevancy 100%
Preferred Solution: BSOD whilst PC is idle. Locale ID 2057

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: BSOD whilst PC is idle. Locale ID 2057

Welcome to Seven Forums.


Code:
Built by: 7601.18229.amd64fre.win7sp1_gdr.130801-1533
Debug session time: Sat Sep 21 21:11:27.516 2013 (UTC + 6:00)
System Uptime: 2 days 21:22:05.874
BugCheck A, {fffff88003846000, 2, 1, fffff8000381600d}
Probably caused by : USBPORT.SYS ( USBPORT!USBPORT_Core_iCompleteDoneTransfer+45f )
BUGCHECK_STR: 0xA
PROCESS_NAME: System
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.18229.amd64fre.win7sp1_gdr.130801-1533
Debug session time: Wed Sep 18 21:15:50.313 2013 (UTC + 6:00)
System Uptime: 0 days 0:47:03.671
BugCheck A, {fffff8800587bc80, 2, 1, fffff8000381400d}
Probably caused by : USBPORT.SYS ( USBPORT!USBPORT_Core_iCompleteDoneTransfer+45f )
BUGCHECK_STR: 0xA
PROCESS_NAME: System
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.18229.amd64fre.win7sp1_gdr.130801-1533
Debug session time: Tue Sep 17 21:19:39.244 2013 (UTC + 6:00)
System Uptime: 1 days 0:26:50.992
BugCheck A, {fffff8800a817ff8, 2, 1, fffff800038161ae}
Probably caused by : USBPORT.SYS ( USBPORT!USBPORT_Core_iCompleteDoneTransfer+45f )
BUGCHECK_STR: 0xA
PROCESS_NAME: System
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.18229.amd64fre.win7sp1_gdr.130801-1533
Debug session time: Mon Sep 16 20:51:17.016 2013 (UTC + 6:00)
System Uptime: 0 days 23:38:05.764
BugCheck A, {fffff88009b4bff8, 2, 1, fffff8000381f1ae}
Probably caused by : USBPORT.SYS ( USBPORT!USBPORT_Core_iCompleteDoneTransfer+45f )
BUGCHECK_STR: 0xA
PROCESS_NAME: System
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.18229.amd64fre.win7sp1_gdr.130801-1533
Debug session time: Sun Sep 15 21:11:38.782 2013 (UTC + 6:00)
System Uptime: 0 days 12:40:28.530
BugCheck A, {fffff88002d23000, 2, 1, fffff8000322d00d}
Probably caused by : USBPORT.SYS ( USBPORT!USBPORT_Core_iCompleteDoneTransfer+45f )
BUGCHECK_STR: 0xA
PROCESS_NAME: System
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.18229.amd64fre.win7sp1_gdr.130801-1533
Debug session time: Sun Sep 15 08:29:36.302 2013 (UTC + 6:00)
System Uptime: 0 days 11:39:05.050
BugCheck A, {fffff8800a923ff8, 2, 1, fffff800032391ae}
Probably caused by : USBPORT.SYS ( USBPORT!USBPORT_Core_iCompleteDoneTransfer+45f )
BUGCHECK_STR: 0xA
PROCESS_NAME: System
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.18229.amd64fre.win7sp1_gdr.130801-1533
Debug session time: Sat Sep 14 20:48:58.203 2013 (UTC + 6:00)
System Uptime: 0 days 23:30:36.951
BugCheck A, {fffff8800c4b7ff8, 2, 1, fffff800038131ae}
Probably caused by : USBPORT.SYS ( USBPORT!USBPORT_Core_iCompleteDoneTransfer+45f )
BUGCHECK_STR: 0xA
PROCESS_NAME: System
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.18229.amd64fre.win7sp1_gdr.130801-1533
Debug session time: Fri Sep 13 21:09:32.690 2013 (UTC + 6:00)
System Uptime: 1 days 0:08:41.438
BugCheck A, {fffff88006309000, 2, 1, fffff8000322f00d}
Probably caused by : USBPORT.SYS ( USBPORT!USBPORT_Core_iCompleteDoneTransfer+45f )
BUGCHECK_STR: 0xA
PROCESS_NAME: System
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.18229.amd64fre.win7sp1_gdr.130801-1533
Debug session time: Thu Sep 12 20:59:17.341 2013 (UTC + 6:00)
System Uptime: 0 days 4:44:01.699
BugCheck A, {fffff88004557000, 2, 1, fffff8000323800d}
Probably caused by : USBPORT.SYS ( USBPORT!USBPORT_Core_iCompleteDoneTransfer+45f )
BUGCHECK_STR: 0xA
PROCESS_NAME: System
??????????????????????????????????????????????????????????????????????????????????????``
Do you have any USB device connected to your PC? If yes, please disable and safely remove it.

Please update these drivers:

lmimirr.sys Wed Apr 11 04:32:45 2007 (461C108D)
RemotelyAnywhere Mirror Miniport Driver or LogMeIn Mirror Miniport Driver
Driver Reference Table - lmimirr.sys

AF15BDA.sys Tue Nov 20 16:19:55 2007 (4742B4CB)
DigitalNow TinyTwin DVB-T Receiver
Driver Reference Table - AF15BDA.sys

LMIRfsDriver.sys Mon Jul 14 22:26:56 2008 (487B7E50)
RemotelyAnywhere Mirror Miniport Driver or LogMeIn Mirror Miniport Driver
Driver Reference Table - LMIRfsDriver.sys

Based on the bugchecks, I would recommend you follow and complete the steps given below:
1. If you are overclocking any hardware, please stop. Reset any changed values back to default and reset/clear CMOS: Clear CMOS - 3 Ways to Clear the CMOS - Reset BIOS. Uninstall any overclocking tool as these can also be a reason of blue screens.

2. Uninstall your current antivirus software. It can be a cause of BSOD very often. Please remove it with its removal tool and use Microsoft Security Essentials in its place. Malwarebytes is a great combination with it. Go through this thread for more info.

3. Run Disk Check with both boxes checked for all HDDs and with Automatically fix file system errors. Post back your logs for the checks after finding them using Check Disk (chkdsk) - Read Event Viewer Log

4. Run SFC /SCANNOW Command - System File Checker to check windows for integrity violations. Run it up to three times to fix all errors. Post back if it continues to show errors after a fourth run or if the first run comes back with no integrity violations.

5. Make scans with Kaspersky TDSskiller and ESET Online scanner.

6. Perform a Clean Start up, this will help avoid any problematic applications from bugging the system.

7. Use Revo Uninstaller Free to uninstall stubborn software. Opt for Advanced Mode and uninstall the software, delete the leftover registry entries.

8. Use Crystal Disk Info to upload a screenshot of your Hard Drives (s). Test your Hard Drives (s) running a Hard Drive Diag.

9. Test and Diagnose RAM issues with RAM - Test with Memtest86+. Pay close attention to Part 3 of the tutorial "If you have errors" Take the test for at least 7-10 passes. It may take up to 22 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold.

http://www.sevenforums.com/bsod-help-support/305700-bsod-whilst-pc-idle-locale-id-2057-a.html
Relevancy 113.77%

Hi,

Been getting these crashes not long after switching my PC on. I put 'crashes when idle' but it just seems to happen whenever really.

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 2057

Additional information about the problem:
BCCode: 3b
BCP1: 00000000C0000005
BCP2: FFFFF80002D5FEA5
BCP3: FFFFF880097B4B40
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

System spec:

Intel(R) Core(TM) i7-3770K CPU @ 3.50GHz (not overclocked)
Asus P8Z77-V LE Motherboard
AMD Radeon HD 7700 Series
Memory 8.00 GB
HDD (1) ST1000DM003-9YN162 (2) ST1000DM003-9YN162
BIOS Ver: 05.13

I'm sure I've missed something and will add anything on request,

Many thanks!

Matt

A:BSOD whilst idle(?) locale ID: 2057

Hi, think I've attached them correctly.

Cheers

http://www.sevenforums.com/bsod-help-support/250885-bsod-whilst-idle-locale-id-2057-a.html
Relevancy 94.6%

Hey guys I'm getting a locale blue screen of death here It's been happening for quite a while now I've noticed it mostly happens when the computer is asleep I'll do a reboot and the BSOD ID: 2057 Locale quot Windows has recovered from an unexpected shut down quot screen appears at login The last times It's happened during PC usage my speakers make a consistent BSOD Locale ID: 2057 drone noise and then the screen flashes blue saying Windows has shut down your PC to prevent damage to your hardware etc I think it might be a driver issue however trying to view the dump files wouldn't work for me before so I'm unable to figure out what the exact cause is all drivers are up to date Video BIOS etc Here's what the error screen reads Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode d BCP BCP BCP BCP FFFFF DE B OS Version Service Pack Product Files that help describe the problem C Windows Minidump - - dmp C Users Yaffel Chucklebutty AppData Local Temp WER- - sysdata xml Read our privacy statement online Windows Privacy Statement - Microsoft Windows If the online privacy statement is not available please read our privacy statement offline C Windows system en-US erofflps txt Any help would be much appreciated Thanks in advance

A:BSOD Locale ID: 2057

Post it following the Blue Screen of Death (BSOD) Posting Instructions, in the next post.

As we check threads from subscriptions folder, if you edit the original post only, the subscription status will not change, and may be the issue will remain unattained.

http://www.sevenforums.com/bsod-help-support/282181-bsod-locale-id-2057-a.html
Relevancy 94.6%

Hello recently I have been getting the BSOD practically everytime I start Locale 2057 ID: BSOD up my Laptop Acer Extensa I was therefore wondering whether anyone could provide any guidance I have attached two of the dmp files in zip format and the problem reports are here Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode a BCP C A D BCP C BCP C BCP B A A OS Version Service Pack Product Files that help describe the problem C Windows Minidump - - dmp C Users Chris AppData Local Temp WER- - sysdata xml Read our privacy statement online http go microsoft com fwlink linkid amp clcid x If the online BSOD Locale ID: 2057 privacy statement is not available please read our privacy statement offline C Windows system en-US erofflps txt Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information BSOD Locale ID: 2057 about the problem BCCode a BCP C AB BCP C BCP F C BCP A FC OS Version Service Pack Product Files that help describe the problem C Windows Minidump - - dmp C Users Chris AppData Local Temp WER- - sysdata xml Read our privacy statement online http go microsoft com fwlink linkid amp clcid x If the online privacy statement is not available please read our privacy statement offline C Windows system en-US erofflps txt Any help in this matter would be GREATLY appreciate Thank you in advance for your time CG

A:BSOD Locale ID: 2057

  
Quote: Originally Posted by Christanj


Hello, recently I have been getting the BSOD practically everytime I start up my Laptop (Acer Extensa 5620). I was therefore wondering whether anyone could provide any guidance, I have attached two of the .dmp files in zip format and the problem reports are here:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.48
Locale ID: 2057

Additional information about the problem:
BCCode: 7a
BCP1: C05A50D0
BCP2: C0000185
BCP3: 694438C0
BCP4: B4A1A000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\020710-45209-01.dmp
C:\Users\Chris\AppData\Local\Temp\WER-19640447-0.sysdata.xml

Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.48
Locale ID: 2057

Additional information about the problem:
BCCode: 7a
BCP1: C04AB528
BCP2: C0000185
BCP3: 48F538C0
BCP4: 956A5FC8
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\020710-40326-01.dmp
C:\Users\Chris\AppData\Local\Temp\WER-126282-0.sysdata.xml

Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
Any help in this matter would be GREATLY appreciate. Thank you in advance for your time,
CG


Hi and welcome

Pretty straight forward. your video driver in both.

I would download and install a fresh copy and run a system file check
to run tyoe cmd in search>right click and run as admin>sfc /scannow

If you are overclocking stop
Let us know the results

Ken


Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\K\Desktop\020710-40326-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*d:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (2 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.x86fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0x82a0e000 PsLoadedModuleList = 0x82b56810
Debug session time: Sun Feb 7 04:08:21.632 2010 (GMT-5)
System Uptime: 0 days 6:24:00.645
Loading Kernel Symbols
...............................................................
................................................................
.......................................
Loadi... Read more

http://www.sevenforums.com/bsod-help-support/61806-bsod-locale-id-2057-a.html
Relevancy 94.6%

I am having problems with BSOD every time I leave my laptop and come back to find it off with a recovery notice when I log back into Windows I BSOD 2057 Locale ID: think it may have something to do with the laptop going into sleep or hibernation mode as I have never seen it happen when I'm at BSOD Locale ID: 2057 the computer Attached are my minidump and sysdata files I am running Windows Home Premium x OEM i - GHz Gb DDR MHz RAM Gb BSOD Locale ID: 2057 RPM SATA HDD GeForce GT M Gb I will be BSOD Locale ID: 2057 very grateful to whoever can help me with this problem as my laptop is only a couple of weeks old Many Thanks James Stansfield Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode f BCP BCP FFFFFA A D BCP FFFFF B C D BCP FFFFFA OS Version Service Pack Product Files that help describe the problem C Windows Minidump - - dmp C Users Stany AppData Local Temp WER- - sysdata xml Read our privacy statement online Windows Privacy Statement - Microsoft Windows If the online privacy statement is not available please read our privacy statement offline C Windows system en-US erofflps txt

A:BSOD Locale ID: 2057

Hi Stany1983 welcome to SF
ew_jubusenum.sys driver caused the crash\bsod
Update it or uninstall it.
The only information i found for this driver is here,
Driver Backup - Backup your drivers instantly
Also update or uninstall this old software\driver lirsgt.sys part of a Copy Protection platform developed by Tages SA
http://www.tagesprotection.com/main.htm

Finish with this step and post back with any results.

http://www.sevenforums.com/bsod-help-support/190479-bsod-locale-id-2057-a.html
Relevancy 94.6%

Hi my Dell continues to crash with Locale ID sometimes it crashes with a black screen and the speakers make a rumbling sound then restarts othertimes its a black screen and multi-coloured lines and now its crashing when I log into windows So i'm now writing this in safe mode I've attached two of the error messages below and attached three dump files Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the ID: BSOD Locale 2057 problem BSOD Locale ID: 2057 BCCode e BCP FFFFFFFFC BCP FFFFF B BCP BCP OS Version Service BSOD Locale ID: 2057 Pack Product Files that help describe the problem C Windows Minidump - - dmp C Users DELL AppData Local Temp WER- - sysdata xml Read our privacy statement online Windows Privacy Statement - Microsoft Windows If the online privacy statement is not available please read our privacy statement offline C Windows system en-US erofflps txt ------------------------------------------------------------------------------ Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode a BCP BCP BCP BCP FFFFF B OS Version Service Pack Product Files that help describe the problem C Windows Minidump - - dmp C Users DELL AppData Local Temp WER- - sysdata xml Read our privacy statement online Windows Privacy Statement - Microsoft Windows If the online privacy statement is not available please read our privacy statement offline C Windows system en-US erofflps txt Can someone please help

A:BSOD Locale ID: 2057

For some reason I am unable to properly view these dumps. could you follow the instructions at the following link please.
http://www.sevenforums.com/crashes-d...tructions.html

http://www.sevenforums.com/bsod-help-support/141832-bsod-locale-id-2057-a.html
Relevancy 94.6%

Hi, I would really be grateful if anyone could help me solve this.

It's a pretty new computer, about a month old. Had BSOD twice now, only a few apps running: Abode Reader, Chrome, Skype, Outlook Word.

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 2057

Additional information about the problem:
BCCode: 1000007f
BCP1: 00000008
BCP2: 801DC000
BCP3: 00000000
BCP4: 00000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\011212-17472-01.dmp
C:\Users\John\AppData\Local\Temp\WER-56877-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt




Spec:

Windows 7 Ulitmate 32 Bit
Intel Core i5
2GB RAM

A:BSOD Locale ID:2057

Both your Intel and AMD graphics drivers were involved in the crash, update the graphics driver.
HP Support & Drivers | United States

Test your RAM
RAM - Test with Memtest86+

http://www.sevenforums.com/bsod-help-support/207909-bsod-locale-id-2057-a.html
Relevancy 94.6%

The BSOD usualy occours when browsing the web and not so much when playing games. I've had several different blue screen headers usually at the bottom saying "dumping physical memory to disk" and counting upwards to 100.

Here are some of the blue screen titles:
IRQL_NOT_LESS_OR_EQUAL
BAD_POOL_HEADER
PAGE FAULT IN NON PAGE AREA

When rebooting and looking at the files related they are usually files in the "windows\minidump" and "local\temp\WER..."

Any information helps, thanks for reading.

A:BSOD - Locale ID: 2057

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

If you are overclocking STOP

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.



To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

http://www.sevenforums.com/bsod-help-support/214115-bsod-locale-id-2057-a.html
Relevancy 94.6%

Hi I am having recurring problems with my pc particularly BSOD Locale I tried using the diagnostics utility Locale: 2057 BSOD and perfmon to determine the problem but neither can finish their processes before the system crashes again I've saved a couple of the BSOD Locale: 2057 crash reports though and hope someone can shed some BSOD Locale: 2057 light on the situation System Specs AMD Phenom II E M A TD-V EVO Mobo Gb RAM MHz Sapphire Radeon HD Gb x Gb HDD Windows bit Crash Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode a BCP C BCP D BCP BCP FFFFF CB C OS Version Service Pack Product Files that help describe the problem C Windows Minidump - - dmp C Users Stany AppData Local Temp WER- - sysdata xml Read our privacy statement online Windows Privacy Statement - Microsoft Windows If the online privacy statement is not available please read our privacy statement offline C Windows system en-US erofflps txt Crash Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode f BCP BCP BCP F BCP FFFFF D CA OS Version Service Pack Product Files that help describe the problem C Windows Minidump - - dmp C Users Stany AppData Local Temp WER- - sysdata xml Read our privacy statement online Windows Privacy Statement - Microsoft Windows If the online privacy statement is not available please read our privacy statement offline C Windows system en-US erofflps txt Please help Many thanks James

A:BSOD Locale: 2057

We do need the actual DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:

* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.
To ensure minidumps are enabled:

* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

http://www.sevenforums.com/bsod-help-support/197739-bsod-locale-2057-a.html
Relevancy 94.6%

I am running Microsoft Windows 7 Ultimate. Motherboard Name: Asus A8000Fm Series Notebook. I have been having issues with BSOD lately. There has not been any change of hardware.
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 2057

Additional information about the problem:
BCCode: 50
BCP1: BAD0B124
BCP2: 00000000
BCP3: 82E592AD
BCP4: 00000002
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

I have attached dmp & sysdata files for analysis.

A:BSOD Locale ID: 2057

Difficult to tell what the problem is from the files provided. Please follow the blue screen instructions to provide us with your full reports.http://www.techsupportforum.com/foru...ta-452654.html

-----

http://www.techsupportforum.com/forums/f299/bsod-locale-id-2057-a-685881.html
Relevancy 94.6%

Hi BSOD's from this morning anywhere between 30 secs to 5 mins using the computer.

Win 7 Ultimate Home
i5 520 @ 2.40ghz
8gb ram


Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 2057

Additional information about the problem:
BCCode: 7f
BCP1: 0000000000000008
BCP2: 0000000080050031
BCP3: 00000000000006F8
BCP4: FFFFF80002A4CEC0
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1

Attached the necessary files, and if anyone can help with this, it'd be greatly appreciated.

Many thanks

-tedweall

A:BSOD's - Locale ID 2057

Let me take a look at what you got there, hold on ...

http://www.sevenforums.com/bsod-help-support/123601-bsods-locale-id-2057-a.html
Relevancy 94.6%

Hi, my PC continues to crash with Locale ID: 2057, it crashes with a blue screen and the speakers make a rumbling sound then restarts.Usually it needs meny restarts then windows are booted and stay stable. I've attached the error messages and dump file.
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 2057

Additional information about the problem:
BCCode: 1e
BCP1: FFFFFFFFC0000005
BCP2: FFFFF80002E9D1D2
BCP3: 0000000000000000
BCP4: FFFFFFFFFFFFFFFF
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\021913-16021-01.dmp
C:\Users\RDK\AppData\Local\Temp\WER-61292-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Thank you for any help

A:BSOD Locale ID: 2057

Please re-run the Sf Diagnostics tool it does not seem to have picked up all the files that we need

http://www.sevenforums.com/bsod-help-support/279248-bsod-locale-id-2057-a.html
Relevancy 94.6%

Hi all,

Been a while I know, but for a while I keep getting the BSOD in this Locale.

Changed Video card re-installed AVG 2013

reduced the number of processes during start up but I get text all over the place on display and in windows mail (as well as on here),

It also takes over an hour to completely boot up but often many programs come up with the window saying Windows is checking for a solution

Any ideas?

Bob

A:Locale 2057 BSOD

Welcome
Bob
For the best possible help, upload the following information.
Blue Screen of Death (BSOD) Posting Instructions
Any help without the required information is pure guess work.

http://www.vistax64.com/crashes-debugging/299582-locale-2057-bsod.html
Relevancy 94.6%

Hi,

I am getting intermittent BSOD, locale ID 2057. Attached are the DM log collector files.

Many thanks in advance for your help!

A:BSOD - Locale ID: 2057

for some reason the process, csrss.exe has terminated itself, this is an important process to run windows, i will look into it further to find out how and why this is happening

http://www.sevenforums.com/bsod-help-support/376182-bsod-locale-id-2057-a.html
Relevancy 93.74%

Hi everyone I've recently bought an overclocked help: Please locale 124, 2057 stop BSOD bundle from a company that assures Please help: BSOD stop 124, locale 2057 me that everything went through vigourous testing before it was sent yet I keep getting blue screens when playing games These can happen anywhere between an hour to hours of gaming the timing is random and goes across all games I've updated all drivers used the memOK provided on the motherboard and run short stress tests on the hardware using a utilty from the asus website I've also checked the Hard drives and used the disc utility checks All of these came back fine I've not tried a memtest yet or anything like HotCPU It might be worth noting that I couldn't do a fresh install of windows as I don't have a disc and I'm not sure whether it'll let me use my product key again I did however remove all updates and windows features and reinstalled these I also found some of the gigabyte files still in the computer but didn't feel confident enough on regedit to remove these I'm relatively new to this so any help would be much appreciated CURRENTLY running Windows Professional Motherboard Asus Maximus Hero VI CPU i k XS OC Ghz Quad CPU Fan Be Quiet Fan RAM GB x GB Corsair DDR Vengeance Low Profile Black Primary Gb Scandisk SDD card Secondary Tb Samsung Hardrive GPU Gb Asus GTX Ti DirectCU II OC PSU Corsair W AX Generic DVD Sound Card Creative Xi-Fi Titanium Sound card PREVIOUSLY running before i upgarded - this worked without fault Windows Professional Motherboard Gigabyte GA-H MA-D V CPU Intel Pentium G Ghz Dual CPU Fan Artic fan RAM GB x GB Corsair DDR Vengeance Low Profile Blue Primary Gb Scandisk SDD card Secondary Tb Samsung Hardrive GPU Gb Asus GTX Ti DirectCU II OC PSU Cooler Master W Generic DVD Soundcard Creative Xi-Fi Titanium Sound card WINDOWS RECOVERY MESSAGE Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode BCP BCP FFFFFA B BCP BF BCP OS Version Service Pack Product Files that help describe the problem C Windows Minidump - - dmp C Windows Temp WER- - sysdata xml Read our privacy statement online Windows Privacy Statement - Microsoft Windows If the online privacy statement is not available please read our privacy statement offline C Windows system en-US erofflps txt

A:Please help: BSOD stop 124, locale 2057

Hey Jacky, and welcome to Seven Forums.

Please read the instructions here: Blue Screen of Death (BSOD) Posting Instructions, and post back with the needed information. One of our BSOD experts should be by later when able to further help.

http://www.sevenforums.com/bsod-help-support/315461-please-help-bsod-stop-124-locale-2057-a.html
Relevancy 93.74%

Hi everyone,

I've being getting this BSOD error pretty much everyday now for the past month or so and have tried all the usual test - Virus, Malware, RAM etc - but have not found anything.

I can run in Safe Modes fine.

Desktop info:

Custom build
Intel Core 2 QUad CPU Q8300 @ 2.5GHz
8GB RAM
120GB SSD
Windows 7 Home Premium 64-bit

Additional information provided by the unexpected shutdow:
BCCode: 124
BCP1: 0000000000000000
BCP2: FFFFFA80071438F8
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7600
Service Pack: 1_0
Product: 256_1

SF Diagnostic Tool file attached.

If you could help with this it'd be greatly appreciated.

Cheers

A:Recurring BSOD Locale ID: 2057

Hi bgy4dm

Install Service pack 1 and all other windows updates. Otherwise the system will remain vulnerable to threats.

Code:
Windows 7 Kernel Version 7600 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Learn how to install Windows 7 Service Pack 1 (SP1)
Service Pack Center - Microsoft Windows

The BIOS is old, too.

Code:
BIOS Version/Date American Megatrends Inc. 0502, 30/10/2009
Try to update it from the motherboard manufacturer's website.

Are you overclocking? As you are getting BSODs, you should stop overclocking and run all the hardware components like CPU, GPU and RAM to their default settings. Also set the BIOS to default, too.
How To Clear CMOS (Reset BIOS)

Is the computer hot? Report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy.

Check if the Power Supply Unit (PSU) supplying adequate power to the computer or not.
eXtreme Power Supply Calculator
Also let us know the wattage of the PSU.

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

Stress test the CPU.
Hardware - Stress Test With Prime95

Let us know the results.
_________________________________________________________________
BSOD ANALYSIS:

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 124, {0, fffffa800716a8f8, 0, 0}

Probably caused by : GenuineIntel

Followup: MachineOwner
---------

3: kd> !sysinfo machineid
sysinfo: could not find necessary interfaces.
sysinfo: note that mssmbios.sys must be loaded (XPSP2+).
3: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa800716a8f8, Address of the WHEA_ERROR_RECORD structure.
Arg3: 0000000000000000, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000000000000, Low order 32-bits of the MCi_STATUS value.

Debugging Details:
------------------
BUGCHECK_STR: 0x124_GenuineIntel

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

PROCESS_NAME: System

CURRENT_IRQL: 0

STACK_TEXT:
fffff880`031af6b0 fffff800`02d17a89 : fffffa80`0716a8d0 fffffa80`06a27040 00000000`00000001 00000000`00000000 : nt!WheapCreateLiveTriageDump+0x6c
fffff880`031afbd0 fffff800`02bf9547 : fffffa80`0716a8d0 fffff800`02c725f8 fffffa80`06a27040 00000000`00000000 : nt!WheapCreateTriageDumpFromPreviousSession+0x49
fffff880`031afc00 fffff800`02b61b95 : fffff800`02cd4360 fffff880`0128ca18 00000000`00000000 fffffa80`06a27040 : nt!WheapProcessWorkQueueItem+0x57
fffff880`031afc40 fffff800`02adc161 : fffff880`0124e700 fffff800`02b61b70 fffff800`02c725f8 00080040`00000000 : nt!WheapWorkQueueWorkerRoutine+0x25
fffff880`031afc70 fffff800`02d72166 : ffffffff`dbf... Read more

http://www.sevenforums.com/bsod-help-support/304882-recurring-bsod-locale-id-2057-a.html
Relevancy 93.74%

After years of stable operation I've had several BSODs in the space of a few days The code is - locale id There does not seem to be a pattern - the first one occurred when I wasn't even touching the computer and I think the only application running at the time was IE Subsequent crashes have occurred while I was using it but I wasn't doing the same thing each time The only warning of trouble was that for a week or two - with increasing frequency - IE kept telling me it had to close and reopen though it seemed to give the message without actually doing so I've not installed any id 6.1.7601.2.1.0.768.3 locale 2057 BSOD hardware or new drivers recently other than to uninstall reinstall my printer driver because there seemed to be a problem with it AFTER the first crash I believe I'm current in regard to updates I've run a full scan McAfee and it came up clean I've discovered that several of but not all the JPG files in one particular folder have become corrupted I have run CHKDSK on all my drives and run it again with the quot Scan for and attempt recovery quot option ticked on BSOD 6.1.7601.2.1.0.768.3 locale id 2057 the drive containing the JPG files and it reported nothing unusual After some Google research I found a thread suggesting this BSOD code can be caused by overclocking not the case here and I haven't touched the BIOS in years or by failed clogged fans causing overheating They looked pretty clean but I have brushed them out and watched them spinning with the side off the case so I don't think that is the problem Ideas Thank you

A:BSOD 6.1.7601.2.1.0.768.3 locale id 2057

The most recent dump file: 031615-29016-01.dmp. Returns the following:

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 4E, {99, 15b6b4, 2, 6f1d9}

Probably caused by : memory_corruption ( nt!MiBadShareCount+4c )

Followup: MachineOwner
---------
The PFN_LIST_CORRUPT bug check has a value of 0x0000004E. This indicates that the page frame number (PFN) list is corrupted.

This error is typically caused by a driver passing a bad memory descriptor list.

----

031615-14617-01.dmp. Returns the following:

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {0, 2, 1, fffff800038c58ec}

Probably caused by : ntkrnlmp.exe ( nt!KeWaitForSingleObject+17c )

Followup: MachineOwner
---------
That is IRQL_NOT_LESS_OR_EQUAL. This indicates that Microsoft Windows or a kernel-mode driver accessed paged memory at DISPATCH_LEVEL or above.

The following process was listed, which is Windows Media Player.


Code:
PROCESS_NAME: wmplayer.exe
-----

031515-16738-01.dmp. Returns the following:

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1A, {41790, fffffa80017e8420, ffff, 0}

Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+35084 )

Followup: MachineOwner
---------
The MEMORY_MANAGEMENT bug check has a value of 0x0000001A. This indicates that a severe memory management error occurred.

With the 41790 as parameter 1, that means a page table page has been corrupted.

-----

031315-14742-01.dmp. Returned the same as the previous dump file.

-----

Download and run MemTest86+ to test your RAM. RAM - Test with Memtest86+



   Note


Run MemTest86+ for at least 8 passes. Ideally set it off before you go to bed and leave it overnight, we're looking for zero errors here. A single error will show something's going bad with your RAM.
Report back with the MemTest86+ results.

http://www.sevenforums.com/bsod-help-support/364409-bsod-6-1-7601-2-1-0-768-3-locale-id-2057-a.html
Relevancy 93.74%

I am running Microsoft Windows 7 Ultimate. Motherboard Name: Asus A8000Fm Series Notebook. I have been having issues with BSOD lately. There has not been any change of hardware.
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 2057

Additional information about the problem:
BCCode: 50
BCP1: BAD0B124
BCP2: 00000000
BCP3: 82E592AD
BCP4: 00000002
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

I have attached dmp & sysdata files for analysis.
 

Relevancy 93.74%

Hi,
I am getting the same error every time, I thought it was my external back up drive, but have disconnected it, problem is still there.

Attached are my files, if anyone could point me in the right direction that would be great.
Kind Regards

Neill

A:BSOD 6.1.7601.2.1.0.768.3 Locale ID 2057

There was only one dump file included and the BSOD seems to have been caused by your TV Tuner driver, check if there's a newer version available:

AVerMedia TV Tuner Card
fffff880`04dad000 fffff880`04de4c00 AVerMsiBDA Mon Dec 12 08:58:24 2011 (4EE5B420)

http://www.sevenforums.com/bsod-help-support/259313-bsod-6-1-7601-2-1-0-768-3-locale-id-2057-a.html
Relevancy 93.74%

I have had the BSOD happening about 1-2 times a day now for 3-4 days.
This has been happening, initially I think with playing media files, but now a lot more randomly.

Please find attached the .zip file as required with all relevant information.

---------------------------------------------------

Windows 7 x64
Originally Pre-Installed
OEM Version
Age of Hardware - 29/11/2009
Age of OS Installation - 29/11/2009
OS Re-Installed 06/02/2010 when I purchased the laptop
CPU - Intel Core i7, Q720 @1.60GHz, 1.60GHz
Video Card - 1GB ATI Mobility Radeon HD 4650
Motherboard - Not Sure, but a Dell Studio 1747
Power Supply - Dell Inspiron 90W, model DA90PE1-00

-------------------------------------------
Many thanks for any clues as to how to go about resolving this issue.

A:BSOD - OS: 6.1.7600.2.0.0.768.3, Locale 2057

Hi,

Simply remove Zone Alarm and your problems should be no more (this type of BSOD is notorious for being caused by Zone Alarm):

Quote:




Zone Alarm Removal tool -> http://download.zonealarm.com/bin/fr...cpes_clean.exe (run in Safe Mode without Networking)

Then reset the Windows Firewall to its default settings -
START -> type cmd.exe -> right-click -> run as administrator -> type netsh advfirewall reset press enter




Regards,
Reventon

BUGCHECK SUMMARY

Code:

Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Wed Dec 29 20:55:38.629 2010 (GMT+13)
System Uptime: 0 days 0:16:25.206
Probably caused by : ntkrnlmp.exe ( nt!KiDoubleFaultAbort+b2 )
BUGCHECK_STR: 0x7f_8
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
Bugcheck code 0000007F
Arguments 00000000`00000008 00000000`80050031 00000000`000006f8 fffff800`02c9fec0
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Wed Dec 29 09:31:41.611 2010 (GMT+13)
System Uptime: 0 days 1:27:55.187
Probably caused by : ntkrnlmp.exe ( nt!KiDoubleFaultAbort+b2 )
BUGCHECK_STR: 0x7f_8
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
Bugcheck code 0000007F
Arguments 00000000`00000008 00000000`80050031 00000000`000006f8 fffff800`02c3aec0
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Tue Dec 28 01:28:57.237 2010 (GMT+13)
System Uptime: 0 days 5:16:57.814
Probably caused by : ntkrnlmp.exe ( nt!KiDoubleFaultAbort+b2 )
BUGCHECK_STR: 0x7f_8
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
Bugcheck code 0000007F
Arguments 00000000`00000008 00000000`80050031 00000000`000006f8 fffff800`02c95ec0
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Mon Dec 27 20:09:56.392 2010 (GMT+13)
System Uptime: 0 days 0:32:55.969
Probably caused by : ntkrnlmp.exe ( nt!KiDoubleFaultAbort+b2 )
BUGCHECK_STR: 0x7f_8
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
Bugcheck code 0000007F
Arguments 00000000`00000008 00000000`80050031 00000000`000006f8 fffff800`02c97ec0
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Sun Dec 26 23:01:21.879 2010 (GMT+13)
System Uptime: 0 days 2:11:22.456
Probably caused by : ntkrnlmp.exe ( nt!KiDoubleFaultAbort+b2 )
BUGCHECK_STR: 0x7f_8
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
Bugcheck code 0000007F
Arguments 00000000`00000008 00000000`80050031 00000000`000006f8 fffff800`02c4eec0
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Sun Dec 26 20:49:27.672 2010 (GMT+13)
System Uptime: 0 days 0:57:02.230
Probably caused by : ntkrnlmp.exe ( nt!KiDoubleFaultAbort+b2 )
BUGCHECK_STR: 0x7f_8
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
Bugcheck code 0000007F
Arguments 00000000`00000008 00000000`80050031 00000000`000006f8 fffff800`02c83ec0
??????????????????????????????????????????????????????????????????????????????????????``

http://www.techsupportforum.com/forums/f299/bsod-os-6-1-7600-2-0-0-768-3-locale-2057-a-539606.html
Relevancy 93.74%

Hi everyone,

I have a new laptop (Lenovo Carbon X1 Thinkpad) that was purchased in January. In the last couple of weeks, I have had about 10 BSOD, all of which have the same error code (2057).

I am self-employed and based in Rome so dont have access to an IT helpdesk or an english speaking place to help me and I definitely don't have the expertise to even try to figure this one out! I am attaching the debug files so that maybe someone can have a look through them for me and see if there is an obvious solution?

Any help would be be greatly appreciated. If you need any more information, please let me know.

Thanks,

H

A:BSOD Locale ID 2057 - How to solve?

We need a bit more information.

Please follow these instructions.

1. Press Start
2. Type msinfo32 and hit enter
3. Once the window is open click file>save
4. Then save the file to the desktop
5. Zip up that file and upload it in your next reply.
It is caused by a Mobile Broadband Modem Filter Driver.


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa800af137a0, fffff80004bda3d8, fffffa8006d11bd0}

Unable to load image \SystemRoot\system32\DRIVERS\Mbm3mdfl.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for Mbm3mdfl.sys
*** ERROR: Module load completed but symbols could not be loaded for Mbm3mdfl.sys
*** WARNING: Unable to verify timestamp for Mbm3CBus.sys
*** ERROR: Module load completed but symbols could not be loaded for Mbm3CBus.sys
Probably caused by : Mbm3CBus.sys

Code:
fffff880`02800000 fffff880`02808000 Mbm3mdfl T (no symbols)
Loaded symbol image file: Mbm3mdfl.sys
Image path: \SystemRoot\system32\DRIVERS\Mbm3mdfl.sys
Image name: Mbm3mdfl.sys
Timestamp: Mon Aug 22 21:39:51 2011 (4E52BE97)
CheckSum: 00014159
ImageSize: 00008000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

Code:
fffff880`028e4000 fffff880`0294d000 Mbm3CBus T (no symbols)
Loaded symbol image file: Mbm3CBus.sys
Image path: \SystemRoot\system32\DRIVERS\Mbm3CBus.sys
Image name: Mbm3CBus.sys
Timestamp: Mon Aug 22 21:37:40 2011 (4E52BE14)
CheckSum: 0007051F
ImageSize: 00069000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
I normally recommend uninstalling these types of drivers. However if they are a necessity to you then you should update them because they are outdated. Once we have your msinfo32.nfo file then I will find out what it is and try and find you a reliable source for updating these drivers.

http://www.sevenforums.com/bsod-help-support/327496-bsod-locale-id-2057-how-solve.html
Relevancy 93.74%

if anyone could help id really appreciate it my laptop medion akoya was working fine no new installs been using it for about a year turned it on on the th of this month it possibly did a windows locale windows 7 BSOD x64 2057 id update im not sure it took about ages BSOD locale id 2057 windows 7 x64 to get to the windows start screen went black for about an hour then i got the bsod i can start up in safe mode with networking i cannot do a repair - it says theres no problem tried memory says its fine there are no restore points BSOD locale id 2057 windows 7 x64 and if i try booting from disc it will not repair and when i try custom it wont do that either there are also no advanced options at this point i have BSOD locale id 2057 windows 7 x64 seen mentioned before i have run malware bytes ccleaner and superantispyware also tried running only microsoft things in startup ive been trying for over a week and havent got a clue what im doing i have run the sf thing which im going to try and upload at this point i no longer care if i lose my stuff though id rather not but i seem to be going around in circles im also a layman so ill need things explaining very clearly thankyou in advance - im dying here

A:BSOD locale id 2057 windows 7 x64

The zip you uploaded does not contain any crash dump.

Follow it: Dump Files - Configure Windows to Create on BSOD
Go to Option Two, Point 2. Download the .reg file and merge it in registry by double clicking it.

Now wait for another BSOD. When it occurred, search the .dmp files manually in the default path: C:\Windows\Minidump or %SystemRoot%\Minidump. See if the crash dump is recorded or not (hopefully it will be recorded).Post it following the Blue Screen of Death (BSOD) Posting Instructions.

By the way, getting an repeated error there in your event logs, which is a fatal one ....

Code:
Event[34311]:
Log Name: System
Source: atapi
Date: 2013-08-25T12:39:43.661
Event ID: 11
Task: N/A
Level: Error
Opcode: N/A
Keyword: Classic
User: N/A
User Name: N/A
Computer: Owner-PC
Description:
The driver detected a controller error on \Device\Ide\IdePort0.
And, checking the system files, I see that there is no storage controller driver installed at all. Which is too unnatural. As the controllers are set to AHCI mode, the driver should be msahci.

Just as a try ... follow the guide: AHCI : Enable in Windows 7 / Vista

Let us know if it changed anything there or not.

http://www.sevenforums.com/bsod-help-support/308642-bsod-locale-id-2057-windows-7-x64.html
Relevancy 93.74%

I've been getting this bsod with "Locale ID 2057" quite often and wondering if someone here can help me find a way to resolve is issue. I'm also getting random hanging/freezes.

I've tried using the SF_Diagnostic_Tool but the SF_ folder is not present after running it and doesn't show up on my desktop.

A:Random BSOD Locale ID 2057 help

Run the SF Diag tool as admin.

It works for each and everybody .... you cannot be any exception there

http://www.sevenforums.com/bsod-help-support/309245-random-bsod-locale-id-2057-help.html
Relevancy 93.74%

This is my first build PC spec is thus Asus M A L-M USB AMD G Socket AM DDR Motherboard AMD Phenom II X Quad Core Black Edition quot W Edition quot GHz Socket AM Corsair XMS GB x GB DDR PC - C MHz Dual Channel Kit CMX GX M A C Samsung SpinPoint F TB SATA-II MB Cache - OEM HD SJ Microsoft Windows Home Premium SP -Bit As you can see there's no graphics card but the motherboard has Radeon IGP which I'm using for the moment Built last Friday and drivers installed from the motherboard CD on first start up after installing Windows Then updated via 1033 2057 ID & BSOD Locale the respective websites where possible Initally after installing drivers from the motherboard CD in Device Manager under Display Adapter it showed as AMD G the chipset After playing an old computer game FM on Sunday I started getting BSODs with Locale ID I updated the graphics driver via the AMD website and under Display Adapter it started showing ATI Radeon the IGP on the motherboard I thought things were fine but then I got a BSOD Locale ID and the PC refused to load Windows Instead getting stuck in a loop of running the Windows Memory Diagnostics Tool no probs detected and Startup Repair which kept failing When the option arose I booted into Safe Mode and uninstalled the Display Adapter driver Booting normally into Windows it detected and automatically installed the graphics driver and it now says AMD G Microsoft Corporation WDDM under Display Adapter As I'm typing this I'm having no problems with BSODs and resets a rarity at the moment so I'm hoping you can help me out with regards to BSOD Locale ID 2057 & 1033 my problem and how to fix it It's my first build and I'd love to be able to use it without fear of a BSOD reset and losing all my work If it is down to the wrong graphics driver then I need help finding the right one On the AMD site there's an option to download and install a driver relating to the AMD xx series chipset which I have but also a separate issue to download a driver for integrated graphics Radeon xxx which I also have - both of which I've tried to install after uninstalling the other obviously and neither solved the BSOD problem I've attached the zip file as requested Many thanks for your help I also have a WhoCrashed report and the result of the Windows StartUp Repair report if either or both of these will help Chris

A:BSOD Locale ID 2057 & 1033

Have run MemTest86+ and it passed the first two passes. I know it needs to run at least 7-8 passes but I'm unable to do that today. I still believe this to be a driver problem so if someone could have a look at the zip file and help me out I'd really appreciate it.

Cheers

Chris

http://www.sevenforums.com/bsod-help-support/173353-bsod-locale-id-2057-1033-a.html
Relevancy 92.88%

Hi everyone I was hoping to get some help with my randomly crashing PC The BSOD and restart used to happen when watching videos online or attempting to play games but now it happens often no matter what I am doing I have done a format of my PC and a clean install of Windows bit but the same thing started happening almost instantly System Specs Processor AMD FX- Quad-Core Ghz GB RAM System Type -bit Operating System Hard drive hitachi hd T SLA ATA TB gigs free Windows Report of crash Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode BCP BCP FFFFFA B C F BCP BCP OS Version Service Pack Product Files that help describe the problem C Windows Minidump - - dmp C Users Magic Box of Wires Locale 2057 ID: happening randomly BSOD AppData Local Temp WER- - sysdata xml Read our privacy statement online http go microsoft com fwlink linkid amp clcid x If the online privacy statement is not available please read our privacy statement offline C Windows system en-US erofflps txt Who Crashed Report On Thu GMT your computer crashed crash dump file C Windows Minidump - - dmp This was BSOD happening randomly Locale ID: 2057 probably caused by the following module ntoskrnl exe nt x A CC Bugcheck code x x xFFFFFA AAC F x x Error WHEA UNCORRECTABLE ERROR file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System Bug check description This bug check indicates that a fatal hardware error has occurred This bug check uses the error data that is provided by the Windows Hardware Error Architecture WHEA This is likely to be caused by a hardware problem problem This problem might be caused by a thermal issue The crash took place in the Windows kernel Possibly this problem is caused by another driver that cannot be identified at this time Thanks very much for your help

A:BSOD happening randomly Locale ID: 2057

Can you boot into Safe Mode?
 
If it boots into Safe Mode you can perform a clean boot.
 
How to perform a clean boot to troubleshoot a problem in Windows Vista, Windows 7, or Windows 8
 
If you can't boot into Safe Mode I would suggest running Hitachi's diagnostic tool to determine the condition of your hdd.
 
Downloads

http://www.bleepingcomputer.com/forums/t/486205/bsod-happening-randomly-locale-id-2057/
Relevancy 92.88%

Hello,

I've got an Alienware Aurora R4 with Windows Home Premuim 64bit. A few days ago my computer started having BSOD issues, crashing and sometimes taking multiple tries to restart. I've not noticed anything consistant in what programmes were running when it happened. I tried a system restore to a few days before I noticed the issue, but it didn't have an effect. I could potentially go back further. Alienware Autopsy scans and self scans find nothing. The signature is always:

Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 2057

I have attached a dmp. file

Attachment 325181

I am a fairly proficient, but not an expert by any means. If anyone has any advice or similar experiences I would greatly appreciate it. Let me know if I have to provide anything further too.

Many thanks for reading.

A:BSOD on Alienware Aurora R4 locale ID:2057

If you don't get help for the problem here, Dell has a special forum for Alienware owners. May get support there.
Alienware Club - Dell Community

http://www.sevenforums.com/bsod-help-support/337626-bsod-alienware-aurora-r4-locale-id-2057-a.html
Relevancy 92.88%

Hi there im having problems with my window getting reccuring BSOD I think it is a driver issue but not sure which drivers Any help would be much appreciated The computer in question has had problems in the past The overclock failed ID Locale Dump = BSOD included 2057 after week reset to default setting and started to run BSOD Locale ID = 2057 Dump included smoother I dimm of RAM is broken so it is a bit machine running on GB of RAM the error seems to happen at random times as I ran prime medium test for hours without BSOD so I have no clue where to start Here is the error report and I will include a zip with the crash files Thanks in advance Josh Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode BCP FFFFF FB FB F BCP BCP FFFFF AB F C BCP OS Version Service Pack Product Files that help describe the problem C Windows Minidump - - dmp C Users simon AppData Local Temp WER- - sysdata xml Read our privacy statement online Windows Privacy Statement - Microsoft Windows BSOD Locale ID = 2057 Dump included If the online privacy statement is not available please read our privacy statement offline C Windows system en-US erofflps txt

A:BSOD Locale ID = 2057 Dump included

No firm information from the single memory dump file. Please zip up and attach ALL the memory dump files!
Also, please include this info from the pinned topic at the top of the forum: http://www.sevenforums.com/crashes-d...tructions.html

Please run Driver Verfier according to these directions:





Quote:
Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

So, I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
NOTE: You can use Low Resource Simulation if you'd like. From my limited experimentation it makes the BSOD's come faster.
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

Reboot into Windows (after the crash) and turn off Driver Verifier by going back in and selecting "Delete existing settings" on the first page, then locate and zip up the memory dump file and upload it with your next post.

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.

If that doesn't work, post back and we'll have to see about fixing the registry entry off-line:

Code:
Delete these registry keys (works in XP, Vista, Win7):
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\VerifyDrivers
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\VerifyDriverLevel
More info on this at this link: Using Driver Verifier to identify issues with Windows drivers for advanced users


BSOD BUGCHECK SUMMARY
Code:

Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Sat Sep 18 09:56:33.118 2010 (UTC - 4:00)
System Uptime: 0 days 0:00:25.242
BugCheck 50, {fffff6fb76fb41f8, 0, fffff80002ab2f4c, 2}
Probably caused by : memory_corruption ( nt!MiSetProtectionOnSection+19c )
BUGCHECK_STR: 0x50
PROCESS_NAME: wininit.exe
??????????????????????????????????????????????????????????????????????????????????????``

http://www.sevenforums.com/bsod-help-support/112088-bsod-locale-id-2057-dump-included.html
Relevancy 92.88%

Hi,

After approximately 15 mins of running my Laptop reboots without warning, when it comes back up it has the above BSOD error.
I have ran memtest86+ for 7 clean passes, I have also ran diskcheck, checked for Virus and Malware issues but found nothing.

I have also ran the computer in all three Safemodes without incident.

Unfortunatly I am now out of ideas and hoped you guys could help, the Laptop specs are:

Dell Inspiron N7010
Intel Core i3 M370 @ 2.4GHz
3GB RAM
320Gb HD
Windows 7 Home Premium 64-bit

The Additional Info provided by the unexpected shutdown window is as follows:
BCCode: 9f
BCP1: 0000000000000003
BCP2: FFFFFA800633EA00
BCP3: FFFFF800042A3518
BCP4: FFFFFA8007149940
OS Version: 6_1_7601
Service pack: 1_0
Product: 768_1

I have also attached the requested files.

Regards,

A:Recurring BSOD, error Locale ID 2057

Hi all of the dumps point toward this : usbccgp.sys
This is a windows property, therefore it did not cause the actual problem most likely. Something else probably created this "usbccgp.sys" to occur.
As you said 15 minutes and then reboots, Well the dump also states this " A driver has failed to complete a power IRP within a specific time (usually 10 minutes)."
1.Try unplugging Your USB devices, and rebooting see if it will run for more than the usual time without a BSOD.
2. If BSOD still occur, then try removing all power. EX: laptop = remove the battery and ac adapter hold down the power button for about 15 seconds and drain the electricity charge out of the capacitors.
3. Use this link to find the latest drivers for your Dell : Drivers and Downloads | Dell [United States]
*There are 46 drivers on that page* I recommend, you start with the BIOS, Chipset, Removable storage, Video, Serial ATA, CPU.*
OR you can use the program on your computer called "Dell system software" to automatically check for you. If you cannot find dell system software download it here : Drivers and Downloads | Dell [United States]

http://www.sevenforums.com/bsod-help-support/251044-recurring-bsod-error-locale-id-2057-a.html
Relevancy 92.88%

OS - Windows x Always been a x Came pre-installed on the system Age of system hardware - years Age of OS installation - since purchase years also CPU - Intel R Core TM i - GHz Video Card - NVidia GeForce GT MotherBoard - No idea Power Supply 2057 ID : restarts.. Random - - BSOD Locale - Dell inc - W I think System Manufacturer Dell XPS This has been happening for the past month or so just randomly my PC would restart its self and when it reboots it gives me the error message Problem Event Name BlueScreen OS Version Locale ID BCCode BCP FFFFFA A E BCP FFFFF F F BCP FFFFFFFFC A BSOD - Locale ID : 2057 - Random restarts.. BCP OS Version Service Pack Product Then some stuff about Minidump which I cannot open anyway Any ways I can resolve this I've had a hunch that it may do with overheating of my GPU or something which BSOD - Locale ID : 2057 - Random restarts.. i've managed to hold off by sticking an actual desk fan next to it and keeping it cool DIY is amazing but its got to a point where its annoying the hell out of me so yeah some help would be appreciated I hope the file I attached is correct to the format you wanted Regards

A:BSOD - Locale ID : 2057 - Random restarts..

Hi,

All of the attached DMP files are of the VIDEO_TDR_FAILURE (116) bug check.

The basic definition of a 0x116 bugcheck is:
There may be a bug in the video driver or video hardware.So, let me now explain what VIDEO_TDR_ERROR means. First off, TDR is an acronym for 'Timeout Detection and Recovery'. Timeout Detection and Recovery was introduced in Vista and carried over to Windows 7. Rather than putting exactly what Timeout Detection and Recovery does exactly, I'll just directly quote the MSDN article!
Timeout detection: The GPU scheduler, which is part of the DirectX graphics kernel subsystem (Dxgkrnl.sys), detects that the GPU is taking more than the permitted amount of time to execute a particular task. The GPU scheduler then tries to preempt this particular task. The preempt operation has a "wait" timeout, which is the actual TDR timeout. This step is thus the timeout detection phase of the process. The default timeout period in Windows Vista and later operating systems is 2 seconds. If the GPU cannot complete or preempt the current task within the TDR timeout period, the operating system diagnoses that the GPU is frozen.
To prevent timeout detection from occurring, hardware vendors should ensure that graphics operations (that is, DMA buffer completion) take no more than 2 seconds in end-user scenarios such as productivity and game play. Preparation for recovery: The operating system's GPU scheduler calls the display miniport driver's DxgkDdiResetFromTimeout function to inform the driver that the operating system detected a timeout. The driver must then reinitialize itself and reset the GPU. In addition, the driver must stop accessing memory and should not access hardware. The operating system and the driver collect hardware and other state information that could be useful for post-mortem diagnosis. Desktop recovery: The operating system resets the appropriate state of the graphics stack. The video memory manager, which is also part of Dxgkrnl.sys, purges all allocations from video memory. The display miniport driver resets the GPU hardware state. The graphics stack takes the final actions and restores the desktop to the responsive state. As previously mentioned, some legacy DirectX applications might render just black at the end of this recovery, which requires the end user to restart these applications. Well-written DirectX 9Ex and DirectX 10 and later applications that handle Device Remove technology continue to work correctly. An application must release and then recreate its Direct3D device and all of the device's objects. For more information about how DirectX applications recover, see the Windows SDK. Article here. With this being said, if Timeout Detection and Recovery fails to recover the display driver, it will then shoot the 0x116 bugcheck. There are many different things that can cause a 0x116, which I will explain below:

(Ensure you have the latest video card drivers. If you are already on the latest video card drivers, uninstall and install a version or a few versions behind the latest to ensure it's not a latest driver only issue. If you have already experimented with the latest video card driver and many previous versions, please give the beta driver for your card a try.)

The following hardware issues can cause a TDR event:

1. Unstable overclock (CPU, GPU, etc). Revert all and any overclocks to stock settings.

2. Bad sector in memory resulting in corrupt data being communicated between the GPU and the system (video memory otherwise known as VRAM or physical memory otherwise known as RAM).

GPU testing: Furmark, run for ~15 minutes and watch temperatures to ensure there's no overheating and watch for artifacts.

RAM testing: Memtest - Refer to the below:

Memtest:

Memtest86+:

Download Memtest86+ here:

Memtest86+ - Advanced Memory Diagnostic Tool

Which should I download?

You can either download the pre-compiled ISO that you would burn to a C... Read more

http://www.techsupportforum.com/forums/f299/bsod-locale-id-2057-random-restarts-749049.html
Relevancy 92.88%

I am running on a Windows -Bit It was put together and Windows installed a few days ago Wednesday th June from brand new parts I have a link that contains details for most of my build if any other details are required I should BSOD times random ID 2057) at (Locale be able to provide them I heard the problem BSOD (Locale ID 2057) at random times may be something to do with my w PSU but I'm not sure When it crashes I usually do not see a blue screen but I have seen it once It usually just freezes for a second and my monitor goes black and I the computer restarts with the option to go into safe mode BSOD (Locale ID 2057) at random times The crash only seemed to happen after I connected my USB WLAN Adapter on Thursday Before that I was running Crysis on max with no crashes I have attached the files required if anything else is needed please let me know The crash has happened during internet browsing gaming and similar tasks but I have not experienced it whilst it is idle or downloading files Thanks in advance for the help EDIT Here is a copy of the error I receive when I restart Quote Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode BCP FFFFF A F BCP BCP FFFF BCP OS Version Service Pack Product Files that help describe the problem C Windows Minidump - - dmp C Users Timothy AppData Local Temp WER- - sysdata xml Read our privacy statement online http go microsoft com fwlink link amp clcid x If the online privacy statement is not available please read our privacy statement offline C Windows system en-US erofflps txt

A:BSOD (Locale ID 2057) at random times

Code:
fffff880`04811000 fffff880`04819000 ASACPI ASACPI.sys Sun Mar 27 20:30:36 2005 (42476C4C)
Older versions of ASACPI.SYS are a known BSOD problem on Windows 7. Update the driver by:Going to the Asus motherboard support site
When you reach the website:
Scroll down the page and click Utilities
Hold Ctrl and press f (ctrl+f) to enter the browser's find feature
Search for "ATK0110 driver for WindowsXP/Vista/Win7 32&64-bit" (without quotes)
Download and install the driver.
After installation is complete, verify that it installed correctly.Click Start Menu
Click My Computer
Go to C:\WIndows\System32\drivers\
Verify that the ASACPI.SYS file is dated 2009 or newer (2010,etc.)

You have a 0x124 hardware bugcheck. If the system is still under warranty, I would recommend sending it in to have diagnostic tests done and any bad hardware replaced.


   Warning
Before you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. WARNING: The steps that follow can void your warranty!!!

For your hardware stop 0x124 crash, read through Stop 0x124 - what it means and what to try and use the following hardware checks to supplement that link.
If you are overclocking any hardware, please stop.

Monitor temperatures during the following tests. Use the following programs to monitor the temperatures. Real Temp is a good CPU temperature monitor.
Speccy - System Information - Free Download will monitor all hardware temperatures.
HWiNFO, HWiNFO32 & HWiNFO64 - Hardware Information and Analysis Tools can be inaccurate for CPU temperatures, but is a good program for GPU temperature monitoring.
Use FurMark: VGA Stress Test, Graphics Card and GPU Stability Test, Burn-in Test, OpenGL Benchmark and GPU Temperature | oZone3D.Net to test the graphics card GPU. Let it run until the GPU temperatures even out or until the GPU temperatures reach a dangerous level (you can find the max temperature for your card on either the nVidia or AMD sites; if you are not sure, ask us). The goal is to get a steady temperature, find out if the GPU is overheating, or to see if there are any artifacts present in the test itself: look for strange pixelated patterns on the screen or colors that do not look like they belong. Then use the |MG| Video Memory Stress Test 1.7.116 Download to test your graphics card memory. Let the memory test run for at least seven passes; the more the better.

Run Hardware - Stress Test With Prime95 to determine any hardware problems. Run all three tests for a few hours each. If you get errors, stop the test and post back here.

Follow the steps for doing CPU stress test using IntelBurnTest

Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).

For Part 3: If You Have Errors: If you swap any memory components, follow these steps for ESD safety:Shut down and turn off your computer.
Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working. If you do not have an anti-static workbench, desk, or pad,... Read more

http://www.sevenforums.com/bsod-help-support/234120-bsod-locale-id-2057-random-times.html
Relevancy 92.88%

Hello BSOD ID: from [Moved 2057 Vista/7] Locale I hope someone out there can help I've had the bluecreen of death happen a few times in the past month or so when BSOD Locale ID: 2057 [Moved from Vista/7] I've started my laptop and tried to log in the blue screen has appeared and my laptop has then restarted itself but it's never been a real problem as it's almost loaded properly on the second try However this morning my system must have been running for about mins of constant bluescreen errors and restarts before I gave up trying to log on and went to work However the problem is still happening I can make it safe in safe mode which I'm doing now and the following error message pops up Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode e BCP FFFFFFFFC BCP FFFFF DA BCP FFFFF EBC BCP FFFFF EBBF OS Version Service Pack Product Files that help describe the problem C Windows Minidump - - dmp C Users Lizi AppData Local Temp WER- - sysdata xml Read our privacy statement online Windows Privacy Statement - Microsoft Windows If the online privacy statement is not available please read our privacy statement offline C windows system en-US erofflps txt I have attached a zipfile of the minidump as seen on other people's threads Any help would be greatly appreciated as my laptop is only months old and it would really suck if I have to send it in for repairs Many thanks

A:BSOD Locale ID: 2057 [Moved from Vista/7]

Hello,

I'm sorry that your thread got overlooked. We're on it now!

It appears that a bad hard drive is the cause. I suggest that you backup your data, and do a clean install on a new drive.

Run SeaTools: | Seagate

You'll want the Short and Long DSTs.

...Summary of the dumps:

Code:

Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Tue Feb 8 14:03:15.222 2011 (UTC - 5:00)
System Uptime: 0 days 0:01:07.580
Probably caused by : hardware_disk
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
BUGCHECK_STR: 0x7E
FAILURE_BUCKET_ID: X64_0x7E_IMAGE_hardware_disk
SystemProductName = Inspiron N5010
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Tue Feb 8 13:36:29.456 2011 (UTC - 5:00)
System Uptime: 0 days 0:01:07.189
Probably caused by : hardware_disk
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
BUGCHECK_STR: 0x7E
FAILURE_BUCKET_ID: X64_0x7E_IMAGE_hardware_disk
SystemProductName = Inspiron N5010
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Tue Feb 8 13:09:19.583 2011 (UTC - 5:00)
System Uptime: 0 days 0:01:06.315
Probably caused by : hardware_disk
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
BUGCHECK_STR: 0x7E
FAILURE_BUCKET_ID: X64_0x7E_IMAGE_hardware_disk
SystemProductName = Inspiron N5010
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Tue Feb 8 13:03:28.034 2011 (UTC - 5:00)
System Uptime: 0 days 0:01:07.766
Probably caused by : hardware_disk
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
BUGCHECK_STR: 0x7E
FAILURE_BUCKET_ID: X64_0x7E_IMAGE_hardware_disk
SystemProductName = Inspiron N5010
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Tue Feb 8 13:01:29.814 2011 (UTC - 5:00)
System Uptime: 0 days 0:01:09.172
Probably caused by : hardware_disk
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
BUGCHECK_STR: 0x7E
FAILURE_BUCKET_ID: X64_0x7E_IMAGE_hardware_disk
SystemProductName = Inspiron N5010
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Tue Feb 8 12:59:29.361 2011 (UTC - 5:00)
System Uptime: 0 days 0:01:08.094
Probably caused by : hardware_disk
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
BUGCHECK_STR: 0x7E
FAILURE_BUCKET_ID: X64_0x7E_IMAGE_hardware_disk
SystemProductName = Inspiron N5010
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Tue Feb 8 12:57:31.408 2011 (UTC - 5:00)
System Uptime: 0 days 0:01:08.782
Probably caused by : hardware_disk
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
BUGCHECK_STR: 0x7E
FAILURE_BUCKET_ID: X64_0x7E_IMAGE_hardware_disk
SystemProductName = Inspiron N5010
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Tue Feb 8 02:30:10.410 2011 (UTC - 5:00)
System Uptime: 0 days 0:01:07.768
Probably caused by : hardware_disk
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
BUGCHECK_STR: 0x7E
FAILURE_BUCKET_ID: X64_0x7E_IMAGE_hardware_disk
SystemProductName = Inspiron N5010
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Tue Feb 8 02:28:21.848 2011 (UTC - 5:00)
System Uptime: 0 days 0:01:06.580
Probably caused by : hardware_disk
DEFAULT_BUCKET_ID: VISTA_DRIVER_F... Read more

http://www.techsupportforum.com/forums/f299/bsod-locale-id-2057-moved-from-vista-7-a-549369.html
Relevancy 92.88%

Hello

I have recently had a problem with getting BSOD while accessing some websites that contain videos, like Youtube and Flightsim sites. The windows Error splash window tells me that there is a .dmp file and .xml file that can help with the problem but I'm not sure what to do next. Can anyone help me please?

Thanks

Andrew

A:BSOD while accessing some websites using IE9 Locale ID 2057

Here's the Diagnostic folder zipped as per the instructions. Thanks

http://www.sevenforums.com/bsod-help-support/283465-bsod-while-accessing-some-websites-using-ie9-locale-id-2057-a.html
Relevancy 92.88%

Hi this has been happening at completely random intervals with different programs running I'll post some minidumps further down in hopes of eliminating the problems I will also list various things I've already tried Please note I'm not a very tech savvy person most of the things I've tried Locale at ID intervals BSOD 2057 random - was done under the guidance of friends who know more about computers than I do My PC specs OS Windows Home Premium bit I - k - stock speeds not overclocked GTX - stock speeds not overclocked GEIL BSOD at random intervals - Locale ID 2057 Black Dragon DDR mhz - not overclocked EVGA Z SLI MICRO Corsair w modular psu - - - - Things I've Tried Updated motherboard drivers to latest versions flashed bios to latest version Uninstalled and re-installed latest graphics drivers Removing one of my ram modules normally I run gb x gb I've tried removing one of them and using each BSOD at random intervals - Locale ID 2057 stick separately to no avail I've ran various benchmarks to try and force a bluescreen but so far I've been unsuccessful which lead me to believe its not hardware related at least that's what I think SFC SCANNOW - came back with no errors CHKDSK r took about hours to complete this one it said something about an orphaned file which it attempted to recover the file name was something along the lines of Windows media xxx - - - - I haven't tried running Memtest yet to rule out the ram completely I intend on running this later and leaving it running overnight when I go to sleep - - - - Not sure how to post the dmp files exactly I know where they are but unsure how to open post the contest of the files for you to view Edit nevermind read the thread on the SF Diagnostic Tool uploaded the folder created by the SF Diagnostic Tool

A:BSOD at random intervals - Locale ID 2057

No one able to help?

http://www.sevenforums.com/bsod-help-support/312266-bsod-random-intervals-locale-id-2057-a.html
Relevancy 92.88%

Hi can anyone help me During gameplay any game I often have while 2057. ID playing games BSOD Locale the screen go blank BSOD while playing games Locale ID 2057. or sometimes striped grey lines for a few seconds then the computer restarts and when I boot back into windows I get the unexpected shut-down error BSOD even though I don't actually get a blue BSOD while playing games Locale ID 2057. screen Locale ID I have tried everything on these forums including a memtest got passes and no errors checking for malware and updating graphics drivers etc and nothing seems to sort it I have a feeling my GFX card needs replacing but I don't want to buy a new one and find out that wasn't what was causing it I am running Windows pro bit full retail and my computer specs are AMD Phenom II X Processor ghz GB ram ATI Radeon HD gb Samsung HD HJ ATA I have attached all the relevant information to help with the error and just before I zipped it all up I completed a Driver verifier process which is the latest error dump file in the zip folder filename - - dmp Any help would be much appreciated

A:BSOD while playing games Locale ID 2057.

Try the free video tests that I've listed at this link: Additional Hardware Diagnostics
You may also want to try the Prime95 test.

The memory dumps point to hardware. The first one mentions your video drivers, while your last one mentions USB. The last one is a Driver Verifier memory dump, but due to the hardware errors it may not be revealing the true cause.

In addition to the hardware tests above, please run the free tests at this link: Initial Hardware Diagnostics

AsIO.sys dates from 2007. It's likely to be associated with your Asus PCProbe utility (although it can be a part of other Asus utilites). I'm unable to find it in your MSINFO32 report, but it does show up in your 26 May memory dump. Please either update it or remove it from your system.

These 3 drivers belong to your Saitek SD6 device:
SaiBus.sys Fri Jan 18 13:28:24 2008 (4790EFC8)
SaiMini.sys Fri Jan 18 13:28:16 2008 (4790EFC0)
SaiK0728.sys Fri Jan 18 13:28:04 2008 (4790EFB4)
They date from 2008 and need to be updated or removed from your system. Worst case, remove them from the system while we're troubleshooting - then reinstall them once the system is stable again.

Your Razer Lachesis driver dates from 2009 (Lachesis.sys Fri Oct 16 09:09:12 2009 (4AD87078)) These devices are known to cause BSOD's with outdated drivers. Please visit the Razer download site and get the latest, Win7 compatible drivers for it.

AMD OverDrive (AODDriver2.sys) is either a stand-alone application, or a component of the AMD VISION Engine Control Center. This driver is known to cause BSOD's on some Win7 systems.





Quote:
Please uninstall all AMD/ATI video stuff from Control Panel...Programs...Uninstall a program
Then, download and install a fresh copy of the ATI drivers from http://www.ati.com (in the upper right corner of the page)
- Select the "Custom" installation option and don't let it install AMD OverDrive or the VISION Engine Control Center (if present)
Then use the ATI uninstall manager to uninstall the Catalyst Control Center (CCC). This is a separate issue and isn't required for the AMD OverDrive removal.

If the device (AODDriver or AODDriver4.01) remains a problem, open Device Manager, select the "View" item.
Then select "Show hidden devices" and scroll down to the Non-Plug and Play Drivers section.
Locate the AODDriver entry, right click on it and select "Uninstall". Reboot for changes to take affect.


Sometimes the driver remains and continues to cause BSOD's. If this is the case for you, post back and we'll give further instructions for safely removing it.

If overclocking, please stop. Remove the overclock and return the system to stock/standard values while we're troubleshooting. Once the system is stable again, feel free to resume the overclocking.

Note below that there are numerous drivers dated from 2009. I'd suggest updating them as you have the time. The links to more info about those drivers are listed below that table in this post.

The following info is just FYI, I've already addressed the issues that I saw in the above paragraphs

- Further info on BSOD error messages available at: http://www.carrona.org/bsodindx.html
- Info on how to troubleshoot BSOD's (DRAFT): http://www.carrona.org/userbsod.html
- How I do it: http://www.carrona.org/howidoit.html

3RD PARTY DRIVERS PRESENT IN THE DUMP FILES
Code:

amdxata.sys Fri Mar 19 12:18:18 2010 (4BA3A3CA)
MpFilter.sys Fri Mar 09 06:05:26 2012 (4F59E3F6)
AtiPcie.sys Tue May 05 11:00:22 2009 (4A005486)
athrx.sys Mon Oct 05 12:33:57 2009 (4ACA1FF5)
AtihdW76.sys Thu Feb 23 07:30:12 2012 (4F463154)
AsIO.sys Mon Dec 17 04:11:49 2007 (47663D55)
atikmpag.sys Thu Apr 05 21:10:44 2012 (4F7E4294)
amdiox64.sys Thu Feb 18 10:17:53 2010 (4B7D5A21)
Rt64win7.sys Fri Jun 10 02:33:15 2011 (4DF1BAAB)
ASACPI.sys Wed May 13 21:25:17 2009 (4A0B72FD)
GEARAspiWDM.sys Mon May 18 08:17:04 2009 (... Read more

http://www.sevenforums.com/bsod-help-support/231660-bsod-while-playing-games-locale-id-2057-a.html
Relevancy 92.88%

Hello chaps.

I've been getting this for a while now: constant messages about a high-speed USB drive as well as random bluescreens. Here's the error report:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.11
Locale ID: 2057

Additional information about the problem:
BCCode: fe
BCP1: 00000008
BCP2: 00000006
BCP3: 00000005
BCP4: 9208D9D8
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Mine's a 32bit Asus netbook. I've seen hotfixes for 64bit versions, but none for 32. I'd be very grateful if you could give me a hand.

A:BSOD occurs randomly, Locale ID:2057

Allot of important info is missing from your zip, please follow Blue Screen of Death (BSOD) Posting Instructions to grab all and upload a new report here.

http://www.sevenforums.com/bsod-help-support/353054-bsod-occurs-randomly-locale-id-2057-a.html
Relevancy 91.59%

Ive recently got back into all the inidie material that is free to download from the web, however whenever i try to run my torrent service it blue screens within about 30 seconds of the download commencing.
The info is:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 2057

Additional information about the problem:
BCCode: d1
BCP1: 0000000000000028
BCP2: 0000000000000002
BCP3: 0000000000000000
BCP4: FFFFF880015A16FD
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Anything else that will help please ask, and any help would be much appreciated cheers.
jbrear

A:BSOD ID 2057, whilst downloading torrents.

Hi jbrear,

Please reconfigure windows to collect the correct info
You want small memory dumps - "MiniDumps"






Quote:
http://www.sevenforums.com/tutorials...-create-bsod.h


And here are the instructions for posting:







Quote:
http://www.sevenforums.com/crashes-debugging/96879-blue-screen-death-bsod-posting-instructions.html



Cheers

Dave

http://www.sevenforums.com/bsod-help-support/278017-bsod-id-2057-whilst-downloading-torrents.html
Relevancy 91.59%

Hey everyone Locale BSOD - Screen/No 2057 Black ID Input was wondering if you could take a quick look at this for me Starting a few months ago my computer would randomly black screen followed by losing input to monitor and all sound dying I would have to turn BSOD Locale ID 2057 - Black Screen/No Input it if off manually via the power button but then once turned back on was fine again This gradually got more frequent it has now developed to a stage where sometimes you simply can not turn it off via the power button and have to flip the manual switch at the back After this it BSOD Locale ID 2057 - Black Screen/No Input sometimes wont immediately turn back on and the only solution ive found to this is to clear cmos via jumper battery This all personally makes me think its a hardware issue but before I start forking out on a witch hunt though I'm assuming mobo I was wondering if you could check the dmp files for me sometimes on reboot after one of these episodes as it tends to go quiet for a week or so after a cmos clear I get the quot windows has recovered from an unexpected error quot detailing a BSOD with the Locale ID I'll try and grab a printscreen of that if it happens again anytime soon but for now ive just attached the SF diagnostic file thanks again Sam Operating System Microsoft Windows Home Premium -bit SP CPU AMD Phenom II X T C Thuban nm Technology RAM GB Dual-Channel DDR MHz - - - Motherboard ASRock M A DE CPUSocket C Graphics SMB H x Hz MB GeForce GTX Ti ASUStek Computer Inc C Hard Drives GB Western Digital WDC WD EARS- Y B ATA Device SATA C Optical Drives TSSTcorp CDDVDW SH- AB ATA Device

A:BSOD Locale ID 2057 - Black Screen/No Input

No expert Samuel but first stop your PSU mate - check to see if the power is flowing - it ain't going to work with no power

http://www.sevenforums.com/bsod-help-support/261639-bsod-locale-id-2057-black-screen-no-input.html
Relevancy 91.59%

Hi Everyone, just got this BSOD while playing Need for speed Rivals, it's not the first time I've seen this BSOD and have posted about it here a while ago - Random BSOD Locale ID 2057 help

Any help would be much appreciated please thanks.

A:BSOD Locale ID 2057 while playing Need For Speed Rivals

here's a copy of what windows 7 reported onscreen when i logged in after the BSOD

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 2057

Additional information about the problem:
BCCode: 124
BCP1: 0000000000000000
BCP2: FFFFFA8007A48028
BCP3: 00000000B66D4000
BCP4: 0000000000000135
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\020614-23166-01.dmp
C:\Users\KillerBeeCan\AppData\Local\Temp\WER-23306-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

http://www.sevenforums.com/bsod-help-support/321098-bsod-locale-id-2057-while-playing-need-speed-rivals.html
Relevancy 91.59%

I unfortunately managed to contract the Ukash virus trojan I dealt after BSOD on virus up, removal. start 2057, locale with this following a few guides on line that led me to restore to yesterday use malware anitbytes and what appears to have succesfully removed the virus Now if i try BSOD on start up, locale 2057, after virus removal. to start the system in normal start mode i get to the log on screen before BSOD'ing The following is from the windows report when BSOD on start up, locale 2057, after virus removal. i start back up in Safemode with networking The windows report wont complete Problem signature Problem Event Name BlueScreen BSOD on start up, locale 2057, after virus removal. OS Version Locale ID Additional information about the problem BCCode BCP FFFFF BCP BCP FFFFF CFD BCP OS Version Service Pack Product Files that help describe the problem C Windows Minidump - - dmp C Users SMceachern AppData Local Temp WER- - sysdata xml Read our privacy statement online Windows Privacy Statement - Microsoft Windows If the online privacy statement is not available please read our privacy statement offline C windows system en-US erofflps txt I have also followed the instruction on uploading the log files using the handy tool on the forum Please can someone help me

A:BSOD on start up, locale 2057, after virus removal.

Symantec Endpoint Driver itself is your problem, as it is seen very often.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 50, {fffff80003421080, 0, fffff880098cfd83, 2}

*** WARNING: Unable to verify timestamp for SRTSPL64.SYS
*** ERROR: Module load completed but symbols could not be loaded for SRTSPL64.SYS

Could not read faulting driver name
Probably caused by : SRTSPL64.SYS ( SRTSPL64+27d83 )

Followup: MachineOwner
---------
Description here: Driver Reference Table - SRTSPL64.SYS

And, all the three crash dumps show the same result here.

Uninstall Norton and all Symentec products using Norton Removal tool. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.
Download, install and update those, and then run full system scans with both of them, one by one.

Let us know the results.

http://www.sevenforums.com/bsod-help-support/284911-bsod-start-up-locale-2057-after-virus-removal.html
Relevancy 91.59%

Hi All,

Recently I converted my server from Linux to Windows Server R2 2008 (Based on Windows 7).
I've had this weird issue where my server seems to restart and I get the 'Serious error' dialogue.

I also notice from time to time, one of my hard drives goes missing from MY Computer, so it may be related.

Can anyone take a look at the dump files and let me know if they have any idea?

A:BSOD, 1 drive disappears from My Computer Locale: 2057

Hello and welcome to SevenForums!
Please follow the Blue Screen of Death (BSOD) Posting Instructions and then report back.

http://www.sevenforums.com/bsod-help-support/355958-bsod-1-drive-disappears-my-computer-locale-2057-a.html
Relevancy 90.73%

Hi,
whilst generally using my computer it will blue screen and state that it is dumping memory, there have been several codes but the latest is:

Local ID: 2057

Additional information about the problem:
BCCode: 1000007e
BCP1: FFFFFFFFC0000005
BCP2: FFFFF800037B3DE0
BCP3: FFFFF880033CB848
BCP4: FFFFF880033CB0A0
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\051912-22620-01.dmp
C:\Users\Antony\AppData\Local\Temp\WER-72556-0.sysdata.xml

I'm currently trying to run "Windows_NT6_BSOD_v3.03_jcgriff2_" but every time i try my computer blue screens so will try and update if it manages to complete.


Edit: how should i attach the system diagnostic report as it saves as a html and says invalid file on upload.

A:BSOD whilst generally using computer local ID: 2057

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.
Please attach the DMP files to your next post not to post one.

If you are overclocking STOP

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.


To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

http://www.sevenforums.com/bsod-help-support/230622-bsod-whilst-generally-using-computer-local-id-2057-a.html
Relevancy 90.73%

Hi

I've an Acer Aspire 5732Z here and it's always been running upto snuff until the other day. It was full of rubbish so I reformatted it and stuck in my copy of Win 7. Everything went in well and I downloaded a few necessary updates, however I now get constant BSOD with varying fault headers.

I have checked the RAM, swapped and reseated them - still blue screen. I have attached a DMP file for viewing. I am now completely stumped with this now.

Any help appreciated. Thank you.

A:New format - BSOD - varying fault headers - Locale ID 2057

Click on button below ....

It will download the DM log collector. Right click on the application and run as administrator. It will generate a .zip file on your desktop. Upload the .zip.
Screenshots and Files - Upload and Post in Seven Forums

http://www.sevenforums.com/bsod-help-support/367414-new-format-bsod-varying-fault-headers-locale-id-2057-a.html
Relevancy 90.73%

Hello all I have been experiencing blue screens of death while playing both 'Empire Total War' and 'Napoleon Total War' This often happens when I leave the game inactive for a few minutes Strangely the game tends to work fine as long as I do not stop playing it This includes just leaving the game on the main menu screen First the screen goes black for a few seconds Monitor shows no input and then there is a long strained beep noise similar to a rapid-fire stop sound and then the machine restarts Drivers are supposedly up to date I have experienced this problem for several weeks since installing both games and so I cannot pinpoint a time when this began Other games are fine I therefore think it is something to do with the Graphics or Sound cards drivers I have followed the instructions Please also find below attached below the most recent crash log A few minutes ago - Sitting idle at the games main menu Edit My profile on this website is a little out of date THe machine in question runs Windows bit Ultimate

A:BSOD Playing Empire & Napoleon: Total War - Locale ID: 2057

Hey there!
Code:
BugCheck 116, {fffffa8007fc54e0, fffff88006a1ee6c, ffffffffc0000001, 3}

Unable to load image \SystemRoot\system32\DRIVERS\atikmpag.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for atikmpag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmpag.sys
Probably caused by : atikmpag.sys ( atikmpag+8e6c )

Code:
lmvm atikmpag
start end module name
fffff880`06ba1000 fffff880`06c00000 atikmpag T (no symbols)
Loaded symbol image file: atikmpag.sys
Image path: \SystemRoot\system32\DRIVERS\atikmpag.sys
Image name: atikmpag.sys
Timestamp: Tue Apr 30 04:48:15 2013 (517F30EF)
CheckSum: 000613E7
ImageSize: 0005F000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

The problem is caused by your graphics driver. Run Display Driver Uninstaller(DDU)
Make sure you tick the Uninstall C:/AMD and C:/NIVIDA folders while you are in DDU when you are done running DDU install your graphics driver again and you should be good to go! This is the guide for DDU: Display Driver Uninstaller: How to use

http://www.sevenforums.com/bsod-help-support/377945-bsod-playing-empire-napoleon-total-war-locale-id-2057-a.html
Relevancy 90.73%

Hi guys I hope you can help me with this. I've had 3 bluescreens in the last couple of days - 2 in the last hour (details of last bluescreen below)!

I'm at newbie level when it comes to this kind of stuff so any help most welcome. I've run the SF Diagnostic Tool and attached the zip file below.

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 2057

Additional information about the problem:
BCCode: 7a
BCP1: FFFFF6FC4000A7E8
BCP2: FFFFFFFFC000000E
BCP3: 000000011C9CA860
BCP4: FFFFF880014FDE50
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

A:BSOD on Win7 laptop - Locale ID: 2057, Product 768_1

Hi npaitken.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

KERNEL_DATA_INPAGE_ERROR (7a)
The requested page of kernel data could not be read in. Typically caused by
a bad block in the paging file or disk controller error. Also see
KERNEL_STACK_INPAGE_ERROR.
If the error status is 0xC000000E, 0xC000009C, 0xC000009D or 0xC0000185,
it means the disk subsystem has experienced a failure.
If the error status is 0xC000009A, then it means the request failed because
a filesystem failed to make forward progress.

Code:
ERROR_CODE: (NTSTATUS) 0xc000000e - A device which does not exist was specified.

DISK_HARDWARE_ERROR: There was error with disk hardware

Code:
3632 errors : !Ntfs (fffff880014fd000-fffff880014fdffe)
Apparently it is your HDD (TOSHIBA MK6461GSYN) is failing.

Do some tests to be sure.
Seatools for DOS
Dell Diagnostic Utility
Let us know the results.

http://www.sevenforums.com/bsod-help-support/324414-bsod-win7-laptop-locale-id-2057-product-768_1-a.html
Relevancy 89.87%

PLease help - whenever I try to open a folder or document in MS word my PC does a dump! AGHH! I can however access my folders and documents if I use the windows explorer icon to get into my libraries that way then its ok. The message I get after the blue screen is this:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 2057
Additional information about the problem:
BCCode: 1e
BCP1: FFFFFFFFC0000005
BCP2: FFFFF880056A8CC0
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1


Can anyone figure this out?
Many Thanks

A:BSOD when opening folder in MS word. locale id 2057 Product 768_1

Please provide this info to help us diagnose your problem: http://www.sevenforums.com/crashes-d...tructions.html

http://www.sevenforums.com/bsod-help-support/232360-bsod-when-opening-folder-ms-word-locale-id-2057-product-768_1-a.html
Relevancy 80.84%

Hey guys,
Frequently I get a BSOD and my Aspire One shuts down. After booting again when the error message comes up, this is what it says:-





Quote:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7100.2.0.0.256.1
Locale ID: 2057

Additional information about the problem:
BCCode: 1000008e
BCP1: C0000005
BCP2: 8756BBAA
BCP3: A57546A0
BCP4: 00000000
OS Version: 6_1_7100
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\070609-15646-01.dmp
C:\Users\Jacob\AppData\Local\Temp\WER-30451-0.sysdata.xml

Read our privacy statement online:
Windows 7 Pre-Release (Release Candidate) Privacy Statement Highlights

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt


What do you think guys? What could be the problem?
Thanks,
803

A:Locale ID: 2057

  
Quote: Originally Posted by the803


Hey guys,
Frequently I get a BSOD and my Aspire One shuts down. After booting again when the error message comes up, this is what it says:-

What do you think guys? What could be the problem?
Thanks,
803



Could you go into c:\windows\minidump and zip ine of the *.dmp files and upload to us?

thanks in advance

Ken

http://www.sevenforums.com/bsod-help-support/15935-locale-id-2057-a.html
Relevancy 80.41%

Hi everyone I few months ago I bought myself a new PC running Vista Home Premium -bit and havn't had any issues with it until now Starting from two days ago my PC has been getting the BSOD and shutting itself down everytime I leave it idle for a few hours when I go bed and again when I go to work It has not yet happened when I've been using it that is probably just coincidence so I haven't been able to see what the BSOD says I'd also like to point out that I didn't make any changes to my system that could have caused the error it just came out of the blue so to speak In the quot Problem Reports and Solutions quot window from the Control Panel it gives the following info codebox Problem signature Problem Event Name BlueScreen OS Version Locale ID Files that help describe the problem some files may no longer be available Mini - dmp sysdata xml Version txt View a temporary copy of these files Warning If a virus or other security threat caused the problem opening a copy of the files could harm your computer Extra information is BSOD computer whilst idle. about the problem BCCode d BCP E B F B BCP BCP BCP E B F B OS Version Service Pack Product Server information d b BSOD whilst computer is idle. -eb - f a- b-c ee d f codebox The mini-dump file contains the following codebox Microsoft reg Windows Debugger Version AMD Copyright copy Microsoft Corporation All rights reserved Loading Dump File C Users Home Desktop Mini - dmp Mini Kernel Dump File Only registers BSOD whilst computer is idle. and stack trace are available Symbol search path is SRV c symbols http msdl microsoft com download symbols Executable search path is Windows Server Windows Vista Kernel Version Service Pack MP procs Free x Product WinNt suite TerminalServer SingleUserTS Personal Built by amd fre vistasp gdr - Machine Name Kernel base xfffff PsLoadedModuleList xfffff c db Debug session time Wed Aug GMT System Uptime days Loading Kernel Symbols Loading User Symbols Loading unloaded module list Bugcheck Analysis Use analyze -v to get detailed debugging information BugCheck D e b f b e b f b Unable to load image SystemRoot system DRIVERS avgfwd a sys Win error n WARNING Unable to verify timestamp for avgfwd a sys ERROR Module load completed but symbols could not BSOD whilst computer is idle. be loaded for avgfwd a sys Probably caused by avgfwd a sys avgfwd a ff Followup MachineOwner --------- kd gt analyze -v Bugcheck Analysis DRIVER IRQL NOT LESS OR EQUAL d An attempt was made to access a pageable or completely invalid address at an interrupt request level IRQL that is too high This is usually caused by drivers using improper addresses If kernel debugger is available get stack backtrace Arguments Arg e b f b memory referenced Arg IRQL Arg value read operation write operation Arg e b f b address which referenced memory Debugging Details ------------------ AUTOBUG USER LCID STR ENU AUTOBUG OS SKU READ ADDRESS GetPointerFromAddress unable to read from fffff b e b f b CURRENT IRQL FAULTING IP e b f b PROCESS NAME System CUSTOMER CRASH COUNT DEFAULT BUCKET ID VISTA DRIVER FAULT BUGCHECK STR xD TRAP FRAME fffffa b c f -- trap xfffffa b c f NOTE The trap frame does not contain all registers Some register values may be zeroed or incorrect rax e b f b rbx rcx edf rdx rsi rdi rip e b f b rsp fffffa b c rbp fffffa c r r e r f f r r r r r iopl nv up ei pl zr na po nc e b f b Resetting default scope LAST CONTROL TRANSFER from fffff ee to fffff FAILED INSTRUCTION ADDRESS e b f b STACK TEXT fffffa b c a fffff ee a e b f b nt KeBugCheckEx fffffa b c b fffff cb fffffa b ca fffffa aa a nt KiBugCheckDispatch x e fffffa b c f e b f b fffffa d fffffa a f fffffa b cc nt KiPageFault x b fffffa b c fffffa d fffffa a f fffffa b cc xe b f b fffffa b c fffffa eb b fffffa aa a fffffa a b fffffa cec fffffa b ca tcpip TcpCleanupTcbWorkQueueRoutine xd fffffa b c d fffffa f f fffffa a f fffffa a b tcpip TcpTcbReceive x db fffffa b cb fffffa fd fffffa ad fffffa a b fffffa a fa tcpip TcpMatchReceive x... Read more

A:BSOD whilst computer is idle.

it drives me crazy when I have PC issues that I can't solve myself.Well, turns out I could solve this one myself =PI did a re-install of AVG and this morning the computer was still running; no BSOD.Hopefully, this has solved the problem for good.Cheers,Alachas

http://www.bleepingcomputer.com/forums/t/250770/bsod-whilst-computer-is-idle/
Relevancy 80.41%

Hi,

I've had a BSOD 4 times in the last week around the same time of day (7.30AM) whilst my PC is idle, but I can't see how to read the minidumps.

Could someone please have a look at the attached dumps and point me in the right direction?

Many thanks in advance.

A:BSOD every few days (whilst PC idle)

Hi there,

All your dumps are pointing to disk issues,


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

KERNEL_DATA_INPAGE_ERROR (7a)
The requested page of kernel data could not be read in. Typically caused by
a bad block in the paging file or disk controller error. Also see
KERNEL_STACK_INPAGE_ERROR.
If the error status is 0xC000000E, 0xC000009C, 0xC000009D or 0xC0000185,
it means the disk subsystem has experienced a failure.
If the error status is 0xC000009A, then it means the request failed because
a filesystem failed to make forward progress.
Arguments:
Arg1: fffff6fc5006f3e0, lock type that was held (value 1,2,3, or PTE address)
Arg2: ffffffffc0000185, error status (normally i/o status code)
Arg3: 0000000389eb8880, current process (virtual address for lock type 3, or PTE)
Arg4: fffff8a00de7c018, virtual address that could not be in-paged (or PTE contents if arg1 is a PTE address)

Debugging Details:
------------------


ERROR_CODE: (NTSTATUS) 0xc0000185 - The I/O device reported an I/O error.

DISK_HARDWARE_ERROR: There was error with disk hardware

BUGCHECK_STR: 0x7a_c0000185

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

PROCESS_NAME: Plex Media Ser

CURRENT_IRQL: 0
Let's try a chkdsk /R

Option Two of this tutorial,

Disk Check

You can also run this,

SeaTools for DOS and Windows - How to Use

Let us know how it goes.

http://www.sevenforums.com/bsod-help-support/324576-bsod-every-few-days-whilst-pc-idle.html
Relevancy 79.98%

Hey guys I really need some help here,
My dads pc has recently been getting the blue screen of death, heres the advance details on the error:-

Code:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 2057

Additional information about the problem:
BCCode: 1000008e
BCP1: C0000005
BCP2: 820BC628
BCP3: 9896BBF4
BCP4: 00000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\071810-21218-01.dmp
C:\Users\Chris\AppData\Local\Temp\WER-76453-0.sysdata.xml

Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
I have also attached 2 zip files, one contains the dump and the other contains the xml, please could someone help out to understand my problem.
The windows will crash at random times.

Cheers!

EDIT: I have also included the performance report for you to look at!

A:BlueScreen Locale ID 2057

  
Quote: Originally Posted by pucker22


Hey guys I really need some help here,
My dads pc has recently been getting the blue screen of death, heres the advance details on the error:-

Code:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 2057

Additional information about the problem:
BCCode: 1000008e
BCP1: C0000005
BCP2: 820BC628
BCP3: 9896BBF4
BCP4: 00000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\071810-21218-01.dmp
C:\Users\Chris\AppData\Local\Temp\WER-76453-0.sysdata.xml

Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
I have also attached 2 zip files, one contains the dump and the other contains the xml, please could someone help out to understand my problem.
The windows will crash at random times.

Cheers!

EDIT: I have also included the performance report for you to look at!



While I am doing the DMP files I can tell you that your first parameter (C00000005) is a memory exception. I would therefor
Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Boot from the CD, and leave it running for at least 5 or 6 passes.

I will be back later with the full results

Ken

EDIT. I did notice that in the first three DMP files chrome was running so I would also un-install it to test.

http://www.sevenforums.com/bsod-help-support/98212-bluescreen-locale-id-2057-a.html
Relevancy 79.12%

So this happens every time i try to boot a game the screen goes black and the system crashes I think this may be caused by the GTX that i just got But most of the time the card boots works and plays games fantastically Just sometimes out of nowhere the game will run but as soon as the game has to be rendered the computer bluescreen's but i dont see this because of the monitor saying that it has lost connection Things i have tried so far Installing windows from fresh The latest BIOS 2057 Locale When Booting ID: ? Games for Locale ID: 2057 When Booting Games ? my motherboard Latest Drivers for my graphics card Locale ID: 2057 When Booting Games ? Updating the games System Windows Ultimate Locale ID: 2057 When Booting Games ? X AM PHENOM II X GHz SEAGATE GB SATAIII MB GBS ASUS M N T-M V AM A KINGSTON GB DDR MHz WINPOWER W GIGABYTE NVIDIA GEFORCE GTX GB GDDR OC EDITION Code Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode BCP FFFFFA B F BCP FFFFF AE AE BCP FFFFFFFFC A BCP OS Version Service Pack Product Files that help describe the problem C Windows Minidump - - dmp C Users Tom AppData Local Temp WER- - sysdata xml Read our privacy statement online http go microsoft com fwlink linkid amp clcid x If the online privacy statement is not available please read our privacy statement offline C Windows system en-US erofflps txt Thanks For Your Time Tom

A:Locale ID: 2057 When Booting Games ?

  
Quote: Originally Posted by Tom123


So this happens every time i try to boot a game, the screen goes black and the system crashes. I think this may be caused by the GTX 460 that i just got. But most of the time the card boots works and plays games fantastically. Just sometimes out of nowhere the game will run but as soon as the game has to be rendered the computer bluescreen's but i dont see this because of the monitor saying that it has lost connection.

Things i have tried so far.

Installing windows from fresh.
The latest BIOS for my motherboard
Latest Drivers for my graphics card
Updating the games

System:
Windows 7 Ultimate X64
AM3 PHENOM II X4 850 @ 3.3GHz
SEAGATE 500GB SATAIII 16MB 6GBS
ASUS M4N68T-M V2 AM3 630A
KINGSTON 4GB DDR3 1333MHz
WINPOWER 700W
GIGABYTE NVIDIA GEFORCE GTX 460 1GB GDDR5 OC EDITION

Code:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 2057

Additional information about the problem:
BCCode: 116
BCP1: FFFFFA8006B661F0
BCP2: FFFFF88010AE8AE4
BCP3: FFFFFFFFC000009A
BCP4: 0000000000000004
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\010112-17082-02.dmp
C:\Users\Tom\AppData\Local\Temp\WER-41199-0.sysdata.xml

Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
Thanks For Your Time

Tom123









Quote:
"It's not a true crash, in the sense that the bluescreen was initiated only because the combination of video driver and video hardware was being unresponsive, and not because of any synchronous processing exception".

Since Vista, the "Timeout Detection and Recovery" (TDR) components of the OS video subsystem have been capable of doing some truly impressive things to try to recover from issues which would have caused earlier OSs like XP to crash.

As a last resort, the TDR subsystem sends the video driver a "please restart yourself now!" command and waits a few seconds.

If there's no response, the OS concludes that the video driver/hardware combo has truly collapsed in a heap, and it fires off that stop 0x116 BSOD.

If playing with video driver versions hasn't helped, make sure the box is not overheating.

Try removing a side panel and aiming a big mains fan straight at the motherboard and GPU.

Run it like that for a few hours or days - long enough to ascertain whether cooler temperatures make a difference.

If so, it might be as simple as dust buildup and subsequently inadequate cooling.

I would download cpu-z and gpu-z (both free) and keep an eye on the video temps Let us know if you need help


STOP 0x116: VIDEO_TDR_ERROR troubleshooting

http://www.sevenforums.com/bsod-help-support/205744-locale-id-2057-when-booting-games.html
Relevancy 79.12%

Hey, Ive been getting this error everyday and its pretty annoying, I dont know how I can fix it but hopefully you guys know :/

Here his the blue screen report:


Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 2057

Additional information about the problem:
BCCode: 4e
BCP1: 0000008D
BCP2: 0002F434
BCP3: 00510013
BCP4: C0061D8B
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

A:Blue Screen, Locale ID: 2057

Additional information is required.

1. Download this .BAT file to your desktop

2. Right-click the .BAT file and 'Run as Administrator'
3. Locate the .ZIP file created on your desktop, and upload it here in your next reply.

http://www.sevenforums.com/bsod-help-support/320129-blue-screen-locale-id-2057-a.html
Relevancy 78.69%

Unfortunately I haven't seen the actual blue screen so I don't know the exact code it displays The only reason I know a BSOD happened is when I come back to my PC and it's at the login screen and then upon logging in the Windows has recovered message pops up Here are the details in the Windows has recovered screen BCCode c BCP BCP BCP BCP FFFFF C BC OS Version I have uploaded the zip file with all relevant automatically generated files It could very well be a power issue because my PC is c5, idle, Locale BCCode BSOD ID times, multiple PC 1033 plugged into an BSOD PC idle, multiple times, BCCode c5, Locale ID 1033 UPS I'm fairly certain I need to buy install new batteries in it but that quot shouldn't quot matter as long BSOD PC idle, multiple times, BCCode c5, Locale ID 1033 as it's plugged into a wall Or it could be my power supply has become faulty I haven't had time to read through all of the event logs to figure out where the exact problem is due to work and my mo old son Any assistance is greatly appreciated If you require more information please let me know

http://www.sevenforums.com/bsod-help-support/392671-bsod-pc-idle-multiple-times-bccode-c5-locale-id-1033-a.html
Relevancy 78.69%

I've been having random BSOD on windows 7 & Windows 8.1 (currently running 8.1) and had 2 BSOD within a few days of each other. One was whilst the computer was idle with nothing open whilst I was asleep and the other one whilst I was gaming.
Computer specs are:
Cooler - CORS CW-9060014-WW Hydro H110
CPU - Intel Core i7 4770K
Motherboard - MSI Z87-G45-GAMING MOBO
GPU - 3GB GByte GTX780 OC PCI-E
Power Supply - Corsair RM650 650W Gold PSU
RAM - 2 X 8gb Corsair DDR3 2133MHZ
Attachment 297679

Attachment 297680

A:Two BSOD whilst IDLE and Gaming (Dumps included)

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1A, {8887, fffffa8004febfd0, fffffa8004cd2770, 504}

Probably caused by : hardware_ram ( ZEROED_PAGE_CORRUPTED )

Followup: MachineOwner
---------
Take memtest. Run for 8 passes and test each stick in a know good slot for an additional 6 passes.
RAM - Test with Memtest86+





Quote:
The goal is to test all the RAM sticks and all the motherboard slots.

Check your motherboard manual to ensure the RAM sticks are in the recommended motherboard slots. Some motherboards have very specific slots required for the number of RAM sticks installed.

If you get errors, stop the test and continue with the next step.

1. Remove all but one stick of RAM from your computer (this will be RAM stick #1), and run Memtest86 again, for 7 passes.*Be sure to note the RAM stick, use a piece of tape with a number, and note the motherboard slot.
If this stick passes the test then go to step #3.

2. If RAM stick #1 has errors, repeat the test with RAM stick #2 in the same motherboard slot.*If RAM stick #2 passes, this indicates that RAM stick #1 may be bad. If you want to be absolutely sure, re-test RAM stick #1 in another known good slot.
*If RAM stick #2 has errors, this indicates another possible bad RAM stick, a possible motherboard slot failure or inadequate settings.
3. Test the next stick of RAM (stick #2) in the next motherboard slot.*If this RAM stick has errors repeat step #2 using a known good stick if possible, or another stick.
*If this RAM stick has no errors and both sticks failed in slot#1, test RAM stick #1 in this slot.
4. If you find a stick that passes the test, test it in all the other motherboard slots.

If Part 2 testing shows errors, and all tests in Part 3 show errors, you will need to test the RAM sticks in another computer and/or test other RAM in your computer to identify the problem.

In this way, you can identify whether it is a bad stick of RAM, a bad motherboard, or incompatibility between the sticks.




   Information
Errors are sometimes found after 8 passes.



   Tip
Do this test overnight, before going to bed.

http://www.sevenforums.com/bsod-help-support/315288-two-bsod-whilst-idle-gaming-dumps-included.html
Relevancy 78.69%

Hi,

just came in this morning and trying to wake the screen and I couldn't gave it a reboot and it made me aware that it had BSOD not sure as to why,

Any help would be greatly appreciated.

Thank you.

http://www.sevenforums.com/bsod-help-support/389268-bsod-whilst-computer-idle-error-0x00000116.html
Relevancy 78.69%

Hi, in the last 2 days I have received 2 BSOD's, the system has been running fine for about 5-6 months with no issues.

I couldn't get the perfmon /report, I get a message saying an error occured whilst generating the report.

Spec;
Win7, retail, installed fresh 5-6 months ago.

Thanks in advance.

A:BSOD whilst system idle, no recent changes made.

It smells of hardware failure (i.e. single bit flips, bad IPs, etc.).

If you still wanna make sure it's software, then I recommend turning on Driver Verifier. Do not select the following checks: Force Pending I/O Requests, IRP Logging, and Low Resource Sim. Make sure to restart system after you finish setup. If you experience a boot loop afterwards, go into Safe Mode by pressing F8 prior to Windows logo and disable DV there. Provide us any new crashdumps.

Otherwise, you can start doing a battery of hardware tests, as followed:

RAM: Memtest86+ - 7+ passes
CPU: Prime95 - Torture Test; Blend; overnight (9+ hours)
GPU: MemtestCL - Run twice (if any of the tests work on your GPU; ATI cards will need to install the ATI APP SDK as it requires OpenCL)
Drives: Seatools - All basic tests aside from the Fix all or the advanced ones.

All of these (excluding MemtestCL) are included in the UBCD if you prefer a Live CD environment (which is the best environment to test hardware on). Note that Prime95 currently does not work on the latest version of UBCD. Also, please provide us temps/voltages using HWInfo with Sensors only option checked. Log two 30-minute instances: one for idle, and one for high load. If you can get the system to crash during high load logging, that's even better.

http://www.sevenforums.com/bsod-help-support/232546-bsod-whilst-system-idle-no-recent-changes-made.html
Relevancy 78.26%

Computer Specs:
Processor - AMD A6=3670 APU with Radeon(tm) HD Graphics 2.70 GHz
Ram - 4GB
System type - Windows 7 64-bit service pack 1
Hard drive - 465GB
Graphics card - Nvidia Gforce 550ti
PSU - CiT 750W Gold Edition PSU
Motherboard - Gigabyte A55M-S2V
Computer is less than a year old, around 6 months, os is around 6 months also.

The problem is every time i turn on my computer after it's been of a while such as overnight it BSOD's and i'm not sure if it's related but then sytem recovery begins and i also get a message saying "updating backup bios, writing bios..." or something of the sort after the Gigabyte startup screen.

A:PC shut's down daily on startup. Locale ID: 2057

By the way everyone, i'm not sure if this has anything to do with it but when i play computer intensive games such as assassins creed 3 and far cry 3 i get graphical glitches after around 20 minutes of playing such as floating npc's and entities and npc's with missing heads and then at about 30 minutes the game crashes to desktop, this normally happens when the process of the game reaches around 600,000K+ in the taskmanager which makes me think it could be a ram problem

http://www.techsupportforum.com/forums/f299/pc-shuts-down-daily-on-startup-locale-id-2057-a-678914.html
Relevancy 78.26%

Hey there A while back a friend said he's gonna add a new graphic's card which he dident after all but he put my old one back in Since then my pc has been getting random shut down's every so often say's a blue screen but it's not Screen says quot No signal quot - secs after it shuts down It's been going on for about weeks after Used to happen every to days But recently it's gone insane to - times a day This is all the info i know I kinda suck with PC's so please tell me what need to get Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode BCP E BCP C BCP C A BCP OS Version Service Pack Product Files that help describe the ID: down shut's Locale PC daily. [SOLVED] 2057 problem C Windows Minidump Mini - dmp C Users User AppData Local Temp WER- - sysdata [SOLVED] PC shut's down daily. Locale ID: 2057 xml C Users User AppData Local Temp WERC D tmp version txt Read our privacy statement Microsoft Online Crash Analysis I use Vista

A:[SOLVED] PC shut's down daily. Locale ID: 2057

Hello lolwhowtf and Welcome to TSF,

Thread has been moved to the BSOD/Crash forum. Please follow the instructions found here. RAR/ZIP all files down and attach them to your next reply in this thread.

http://www.techsupportforum.com/forums/f299/solved-pc-shuts-down-daily-locale-id-2057-a-602776.html
Relevancy 78.26%

I guess this is my last port of Blue/Black screen Locale 2057 call on this one its driving me nuts now officially Im having some major issues with my new windows pc Ive got so many black screen of deaths now its untrue These are happening anywhere from minutes of use and hours of use throughout the day sometimes or three times a day My error is a blue screen but what actually happens is the screen goes completely black and my pc restarts itself Its like it had a power cut This is displayed upon restart Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode BCP BCP FFFFFA B BCP BCP OS Version Service Pack Product Files that help describe the problem C Windows Minidump - - dmp C Users CURTIS AppData Local Temp WER- - sysdata xml Read our privacy statement online Windows Privacy Statement - Microsoft Windows If the online privacy statement is not available please read our privacy statement offline C Windows system en-US erofflps txt ----- Each time it happens the same data is displayed but the bit ive highlighted can sometimes change numbers Same physical problem each time though Anyone have an idea what this is Ive read online and tried Blue/Black screen Locale 2057 the 'prevx' solution to this problem as its quite a common problem it seems That didnt help my issue though Ive included a the memory dump file Can anyone here help me my system spec is in my profile Many thanks -Kev

A:Blue/Black screen Locale 2057

Ive also anti malwared my system a few time using 'malwarebytes'...etc and have full virus protection etc.

http://www.sevenforums.com/bsod-help-support/62479-blue-black-screen-locale-2057-a.html
Relevancy 77.83%

Hi,

New to the forum and with an issue I cannot resolve.
I have done a Memtest - all results OK
I have done a DLGDIAG on Hard Drive - all results OK
I have got all the latest drivers
The crash normally happens between 10pm and 6am when no-one is using the PC and it is idle.
Recently had an issue with overheating which was resolved by Currys (KnowHow) installing a new fan.
Recently upgraded the RAM from 4gb to 16gb
No new programs installed.
I am completely stuck - I have ordered a new Graphics Card (just in case).
Can anyone help please ?

A:BSOD - ntoskrnl.exe+74469 - Random Crashes every day whilst PC is idle

Hi Smoo62.

Test your RAM modules for possible errors. How to Test and Diagnose RAM Issues with Memtest86+
Run memtest86+ for at least 8 consecutive passes.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.
You said that you have done it, but do as it is said. Take a camera snap of the memtest screen before you close it, and let us see it. It is needed.
If it does not show any error, enable Driver Verifier to monitor the drivers. Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.



   Information
Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.



   Warning
Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.



   Tip

If you fail to get on the Desktop because of DV, Boot into Advanced Boot Options > Safe mode. Disable DV there. Now boot normally again, and try following the instruction of enabling DV again.
If you cannot boot in Safe mode too, do a System Restore to a point you made earlier.

Let us know the results, with the subsequent crash dumps, if any.
____________________________________________

Code:
BugCheck 3B, {c0000005, fffff8000332df4f, fffff880076b3c90, 0}

Probably caused by : memory_corruption ( nt!MiIdentifyPfn+26f )

Followup: MachineOwner
---------

http://www.sevenforums.com/bsod-help-support/363148-bsod-ntoskrnl-exe-74469-random-crashes-every-day-whilst-pc-idle.html
Relevancy 77.4%

I have been having death Locale screen Grey - ID of aswell 2057 the grey screen of death also some other random colours with stripes but the grey screen with coloured stripes is the most frequent since May of this year I built the system in May Solutions that I have tried and failed Install latest ati drivers Test my RAM with Locale ID 2057 - Grey screen of death aswell MemTest and Windiag Flash my motherboard bios to the latest version Installed all latest gigabyte drivers and chipsets RMA'ing my card but quot Overclockers quot said its not faulty One solution that did work was to put another Grahics Card a ASUS GeForce GT This card worked fine in my system But its not good enough for games What I did now was reinstall windows My plan was to not install anything apart from internet security Commodo is what I am using a few non essential programs and of course windows update I did not install anything to do with ATI Now I was on youtube the sound of my hardrive started making noise as if I was running some sort of virus scan which I was not Then my screen went black for a couple of seconds then windows recovered I got the following error message from action centre ---------------------------------------------------------------------------------------- Description A problem with your video hardware caused Windows to stop working correctly Problem signature Problem Event Name LiveKernelEvent OS Version Locale ID Files that help describe the problem WD- - dmp sysdata xml WERInternalMetadata xml View a temporary copy of these files Warning If a virus or other security threat caused the problem opening a copy of the files could harm your computer Extra information about the problem BCCode BCP FFFFFA F BCP FFFFF E FB BCP BCP OS Version Service Pack Product ------------------------------------------------------------------------------------------------ Can someone read my dump file and give me some advice I haven't installed any ATI drivers yet My system specs OS----Windows Professional x CPU-----Intel i Motherboard----GBYTE GA-X A UD R Memory----Corsair Memory XMS GB Graphics Card s ------SAPPHIRE HD GB GDDR PCIE Game Edition Monitor s Displays-----Viewsonic VX WM LCD Screen Resolution----- Hard Drives------ TB Samsung HD WI Spinpoint F EG ---------- TB Samsung HD SJ Spinpoint F PSU-----Corsair TX W Case-------Lancool PC-K Mid tower Cooling--------Corsair H Keyboard----------Logitech G Mouse---------- Logitech Gaming Mouse G

A:Locale ID 2057 - Grey screen of death aswell

Quote:
also some other random colours with stripes, but the grey screen with coloured stripes is the most frequent


This suggests that the card is defective or overheating

There is a high probability that your graphic card is faulty
This bugcheck 0x117 is either caused by defective RAM or GPU

Dumps blame atikmdag.sys, your ATI display drivers

- Boot into safe mode with networking
- Uninstall the ATI drivers including Catalyst Control Center
- Use driver sweeper to remove leftover ATI display driver files Guru3D - Driver Sweeper
- Install the latest drivers ATI Radeon
- Reboot into normal mode

If the above does not work you should replace your graphic card


Code:
BugCheck 117, {fffffa8003f56010, fffff88003e06fb8, 0, 0}

Unable to load image atikmpag.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for atikmpag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmpag.sys
Probably caused by : atikmpag.sys ( atikmpag+6fb8 )

http://www.sevenforums.com/bsod-help-support/133249-locale-id-2057-grey-screen-death-aswell.html
Relevancy 77.4%

Hi Hope someone can help I've had the bluecreen of death happen a few times in the past month when I've started my lapotp but it's never been a real problem as it's always loaded on the second try However this morning my system must have been running for about mins of constant 2057 Version Locale ID: OS Death 6.1.7600.2.0.0.768.3 Bluescreen of bluescreen errors before I gave up trying to log on and went to work However the problem is still happening The problem message is Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about Bluescreen of Death Locale ID: 2057 OS Version 6.1.7600.2.0.0.768.3 the problem BCCode e BCP FFFFFFFFC BCP FFFFF DA BCP FFFFF EBC BCP FFFFF EBBF OS Version Service Pack Product Files that help describe the problem C Windows Minidump - - dmp C Users Lizi AppData Local Temp WER- - sysdata xml Read our privacy statement online Windows Privacy Statement - Microsoft Windows If the online privacy statement is not available please read our privacy statement offline C windows system en-US erofflps txt I have attached a zipfile of the minidump as seen on other threads Any help would be greatly appreciated as my laptop is only months old Many Bluescreen of Death Locale ID: 2057 OS Version 6.1.7600.2.0.0.768.3 thanks

A:Bluescreen of Death Locale ID: 2057 OS Version 6.1.7600.2.0.0.768.3

I'm showing a failing harddrive here.
The dumps are pretty consistent and agree a hard disk fault is the source of error.
If this had been going on I would be quick to blame a related driver. however, Given the consistency and slow but increasing frequency and severity of the problems, you may be due for a new hard drive in that machine.

...I would let someone else verify this before making any purchases or going in for service though.

In the meantime run a disk check on it if you can.

http://www.sevenforums.com/bsod-help-support/143333-bluescreen-death-locale-id-2057-os-version-6-1-7600-2-0-0-768-3-a.html
Relevancy 76.54%

Hi guys,

Please help if possible. Having this problem already more then 3 months.

I watch football live lets say and suddenly screen gets gray, laptop starts beeping (don't really know how to express that sound) and crashes, then I have to start it in safe mode. Or sometimes the screen gets mini squares. Or I get blue screen with this message:

Problem Event Name: BlueScreen OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 2057,
BCcode: 116,
BCP1:FFFFFA800A63C4E0
BCP2:FFFFF88004770C48
BCP3:0000000000000000
BCP4:00000000000000002
OS version: 6_1_7600
Service pack: 0_0
Product: 256_1.

My two friends told me to post here. Guys please assist as this has been playing on my nerves very much as you can imagigen and I cannot really afford any laptop or motherboard updates for a while.

Thanks,
Boboyvati

A:Getting Blue screen, error code Locale ID: 2057, bccode:116

Post it following the Blue Screen of Death (BSOD) Posting Instructions.

http://www.sevenforums.com/bsod-help-support/307547-getting-blue-screen-error-code-locale-id-2057-bccode-116-a.html
Relevancy 67.08%

Hi all, just a query really...

I've noticed that when I boot up my XP machine and leave it running, more often than not, the HD is going mad, even if I haven't opened an y apps and nothing is runnning apart from the O/S. What is my machine doing actually at this time?
thanks!
 

https://forums.techguy.org/threads/xp-whilst-idle.393599/
Relevancy 58.05%

I've been getting a few BSODs recently.
Mostly when away from the computer, but once whilst browsing.
I have not changed any hardware.
I have moved the computer from one room to another and changed the ethernet cable connected.
I do not believe any damage could of been caused to the hardware when moving but I suppose it is a possibility. It took no noticeable bumps or shunts.

I have recently activated ssh with cygwin, which created a new privileged user. But I do not see how that should affect it.

I have also changed a setting in utorrent "Enable UPnP port mapping" and "Enable NAT-PMP port mapping" have both been activated. Again I don't see how this should cause BSOD but I'm trying to provide as much info as may be relevant.

I've attached the seven forums diag tool directory.

Thanks in advance for any help!

A:New fairly regular BS0D mostly when "idle", once whilst on youtube.

Not that I can weigh in on much here, but I can say that it's very unlikely that your uTorrent settings caused this; I use the same settings with no adverse effects

http://www.sevenforums.com/bsod-help-support/252704-new-fairly-regular-bs0d-mostly-when-idle-once-whilst-youtube.html
Relevancy 57.62%

Hello AllI am, running win7, on a core 2 quad, with 4gb ram.been working fine for 2 years with raptors installed.changed to a corsair ssd 60gb and it runs fine for around 1 month, then without adding any new programms, I start getting BSOD.I never see the bsod, as it happens early hours of morning.can you help please?what do I need to post?EDIT: Deleted clutter data from post ~ Hamluis.

A:Bsod 2057

got a screen dump of the problem ntoskrnl.exe+70740
help
so far I have uninstalled avg
rebooted.
installed avast.
my avg has loads of errors, like it cant update and so forth...
fingers crossed.
did a full scan using several online virus scanners - no error.

http://www.bleepingcomputer.com/forums/t/376903/bsod-2057/
Relevancy 57.19%

Is Windows 7 . . .
- Current OS = windows 7 x86 (32-bit)
- origional OS = Windows XP
- full retail version
- What is the age of system (hardware)? dont know
- What is the age of OS installation very = recent (within 1 week)

A:BSOD Local ID:2057

The first thing I noticed was that on two of your dumps the date was off by a few days. It looks like after you installed SP1 it corrected itself. Just double check to make sure that it's the right date and time.

Your first two crashes were caused by a Netgear or D Link USB Network Adapter. I don't see that driver loaded in your latest dump. Did you remove it? I do see that you still have programs installed for it. If you don't use that USB any more then uninstall any software related to it.

Your third dump was caused by your Marvell TOPDOG 802.11n WLAN Driver for Vista x86 (USB8x). I don't believe this is compatible with Win 7 since it says it's for Vista x86. The Wireless UBS are known to cause issues with Windows 7. I would try removing the stick from the computer and uninstalling any related software and see if the problem continues.

Your video card could use updating. It's not related to your current issue but it could cause problems later down the road

Code:
atikmdag.sys Fri Apr 24 06:50:20 2009 (49F1996C)
Update your ATI Video Card Drivers - here

Summary of dumps

Code:
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Thu Apr 14 01:22:59.961 2011 (UTC - 4:00)
System Uptime: 0 days 11:17:54.371
Probably caused by : usbhub.sys
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
FAILURE_BUCKET_ID: 0x9F_4_WN111_IMAGE_usbhub.sys
????????????????????????????????????????????????????????????????????????????????
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Wed Apr 13 12:34:39.222 2011 (UTC - 4:00)
System Uptime: 0 days 11:21:25.972
Probably caused by : usbhub.sys
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
FAILURE_BUCKET_ID: 0x9F_4_WN111_IMAGE_usbhub.sys
????????????????????????????????????????????????????????????????????????????????
Built by: 7601.17514.x86fre.win7sp1_rtm.101119-1850
Debug session time: Sat Apr 9 05:42:16.072 2011 (UTC - 4:00)
System Uptime: 0 days 12:27:58.791
Probably caused by : usbhub.sys
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
FAILURE_BUCKET_ID: 0x9F_4_MRVW24B_IMAGE_usbhub.sys

Code:
8be45000 8be8d000 ACPI ACPI.sys Sat Nov 20 03:37:52 2010 (4CE788E0)
8c777000 8c7d1000 afd afd.sys Sat Nov 20 03:40:00 2010 (4CE78960)
94229000 9423b000 AgileVpn AgileVpn.sys Mon Jul 13 19:55:00 2009 (4A5BC954)
930e5000 930f5000 agp440 agp440.sys Mon Jul 13 19:25:36 2009 (4A5BC270)
8bfd2000 8bfdb000 amdxata amdxata.sys Fri Mar 19 12:19:01 2010 (4BA3A3F5)
8bfa6000 8bfaf000 atapi atapi.sys Mon Jul 13 19:11:15 2009 (4A5BBF13)
8bfaf000 8bfd2000 ataport ataport.SYS Sat Nov 20 03:38:00 2010 (4CE788E8)
94830000 94c84000 atikmdag atikmdag.sys Fri Apr 24 06:50:20 2009 (49F1996C)
8c6e2000 8c6e9000 Beep Beep.SYS Mon Jul 13 19:45:00 2009 (4A5BC6FC)
930a4000 930b2000 blbdrive blbdrive.sys Mon Jul 13 19:23:04 2009 (4A5BC1D8)
8bcd1000 8bcd9000 BOOTVID BOOTVID.dll Mon Jul 13 21:04:34 2009 (4A5BD9A2)
94fd2000 94feb000 bowser bowser.sys Mon Jul 13 19:14:21 2009 (4A5BBFCD)
98ed0000 98eee000 cdd cdd.dll unavailable (00000000)
8c6bc000 8c6db000 cdrom cdrom.sys Sat Nov 20 03:38:09 2010 (4CE788F1)
8bd1b000 8bdc6000 CI CI.dll Sat Nov 20 07:05:17 2010 (4CE7B97D)
8c665000 8c68a000 CLASSPNP CLASSPNP.SYS Mon Jul 13 19:11:20 2009 (4A5BBF18)
8bcd9000 8bd1b000 CLFS CLFS.SYS Mon Jul 13 19:11:10 2009 (4A5BBF0E)
8c179000 8c1d6000 cng cng.sys Mon Jul 13 19:32:55 2009 (4A5BC427)
9421c000 94229000 CompositeBus CompositeBus.sys Sat Nov 20 04:50:21 2010 (4CE799DD)
94e4b000 94e58000 crashdmp crashdmp.sys Mon Jul 13 19:45:50 2009 (4A5BC72E)
93028000 9308c000 csc csc.sys Sat Nov 20 03:44:32 2010 (4CE78A70)
9308c000 930a4000 dfsc dfsc.sys Sat Nov 20 03:42:32 2010 (4CE789F8)
8c3da000 8c3e6000 discache discache.sys Mon Jul 13 19:24:04 2009 (4A5BC21... Read more

http://www.sevenforums.com/bsod-help-support/155969-bsod-local-id-2057-a.html
Relevancy 57.19%

So my computer has been repeatedly Blue Screening for a while. I've done memtest and prime95. It passed all so I'm a little confused.
It comes up as 2057 (I think)
Any help would be great - dump is attached
It happens most when I try to start World of Tanks

Thank you for any help
-Rizz

A:BSOD 2057 Happens most when launching WOT

[QUOTE=HarriePateman;2872507]

   Warning
4) No piracy or discussion of piracy allowed at all. Such as software, music, videos and other intellectual property violations (e.g. downloading youtube videos locally etc).


Your copy of windows is not genuine, Supports end here.

Counterfeit installations such as yours contain heavily modified code that causes the installation to behave it unexpected ways. Analyzing BSOD's and determining their causes on these sorts of installations is very unreliable. For this reason, many analysts won't attempt it.

My recommendation is to install a genuine Windows 7. This will minimize the problems you are experiencing, and make subsequent diagnosis of BSOD's far more reliable. Once you are running a genuine Windows 7 installation, and are still experiencing BSOD's, we will be happy to help you solve them.

http://www.sevenforums.com/bsod-help-support/345176-bsod-2057-happens-most-when-launching-wot.html
Relevancy 57.19%

Hi.

I have been having trouble with the BSOD Local Id 2057, It happens more when playing games like battlefield 3.
Can anyone pls try and help me sort this problem out.


Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 2057
Additional information about the problem:
BCCode: 124
BCP1: 0000000000000000
BCP2: FFFFFA800E171028
BCP3: 00000000F2000000
BCP4: 000000000020008F
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1
Files that help describe the problem:
C:\Windows\Minidump\013112-22932-01.dmp
C:\Users\Craig Smith\AppData\Local\Temp\WER-48001-0.sysdata.xml
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

A:I keep on the BSOD Local Id 2057.

A stop error of 0x124 is a general hardware error .





Quote:
A "stop 0x124" is fundamentally different to many other types of bluescreens because it stems from a hardware complaint.

Stop 0x124 minidumps contain very little practical information, and it is therefore necessary to approach the problem as a case of hardware in an unknown state of distress


Some generic advice.

If you are overclocking STOP.
Return to the default settings at least for now.

If you are running a RAID update its driver.
You can read more on this error and what to try here...

Stop 0x124 - what it means and what to try

http://www.sevenforums.com/bsod-help-support/211861-i-keep-bsod-local-id-2057-a.html
Relevancy 57.19%

Hi

I have a problem with my graphics sometimes when whatching youtube or on certian sites with video but i still can play games etc.
My pc screen goes blank and will not come back on, it used to flash up sometimes with nvidia has stopped responding and has recovered.
My card is a nvidia gts 250 drivers uptodate running windows 7 64 bit, i looked at the dump and it says Probably caused by : nvlddmkm.sys ( nvlddmkm+929adc )
Hope someone can shed a little light on this problem, thank you.

A:BSOD error id 2057

Code:
BugCheck 116, {fffffa8006626010, fffff88006729adc, ffffffffc000009a, 4}

Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+929adc )
Update:


Code:
1: kd> lmvm nvlddmkm
start end module name
fffff880`05e00000 fffff880`0689e000 nvlddmkm T (no symbols)
Loaded symbol image file: nvlddmkm.sys
Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
Image name: nvlddmkm.sys
Timestamp: Sat Dec 29 06:47:52 2012 (50DE9218)
CheckSum: 00A7F96C
ImageSize: 00A9E000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

Code:
Usual causes: Video driver, overheating, bad video card, BIOS, Power to card
Please check for the latest driver updates for your graphics card on the manufacturer's website: Download Driver
Start Type: Device Manager
Expand Display Adapters
Right-Click Driver Name, Uninstall
Reboot
Run Driver Sweeper
Reboot
Install Downloaded Driver
Driver Sweeper will scan for any left over files from the old driver, old driver files can cause conflicts with new driver installations. Create a System Restore point beforehand, in case any problems or issues arise.

Driver Sweeper:Drivers - Clean Left over Files after Uninstalling
Check for any overheating issues, by posting a screenshot of your idle and load temperatures.

Follow these steps:STOP 0x116: VIDEO_TDR_ERROR troubleshooting
Overclocking -

I recommend if you are overclocking any hardware, that you reset these values within the BIOS to their default values in order to increase the stability of your system.

Please run the following tests for your graphics card and RAM:
RAM - Test with Memtest86+
Run Memtest86+ for least 9-10 passes, and preferably overnight as it can take a while to fully complete.

Test each RAM stick individually, if an error is found then move the same RAM stick into the next DIMM slot and test again, if errors are found for the same RAM stick in every available slot then you have a faulty RAM module. On the other hand, if no errors are found in the next slot or the other slots for the same RAM module, then you have a faulty DIMM slot.

Test each RAM stick and every motherboard DIMM slot available.

Graphics Card:Video Card - Stress Test with Furmark
Read all the steps within the hardware test tutorials very carefully, as stress tests is designed run components to their maximum capacity, in order to point out failing or faulty hardware components.

Use the following program to monitor your hardware temperatures during the stress test:CPUID HWMonitor
Run some hard-drive diagnostics and follow these steps:Hard Drive Diagnostic Procedure
Find your hard-drive manufacturer and run their tests.

Additional Tests:SeaTools for DOS | Seagate
CrystalDiskInfo - Software - Crystal Dew World
Post a screenshot of Crystal Disk Info summary:Screenshots and Files - Upload and Post in Seven Forums
Make sure you have the latest firmware for SSD, and ensure all the SATA and Power cables are connected to the drive.

Check for any file system errors and bad sectors using Option #2 of:Disk Check
Use this command with Disk Check:


Code:
chkdsk C: /f /r
Scan for corrupted or missing Windows files with:SFC /SCANNOW : Run in Command Prompt at Boot
Check for any driver compatibility issues with:Windows 7 Upgrade Advisor - Download - Microsoft Windows
If you are using DirectX, then try uninstalling and then reinstalling the DirectX Runtime:How to download and install DirectX
Test the Video RAM - NVIDIA/AMD Video Card - Test with OCCT

http://www.sevenforums.com/bsod-help-support/275352-bsod-error-id-2057-a.html
Relevancy 57.19%

Built a new desktop for my son, all working brilliantly, proud moment. Then the ugly BSOD started appearing.
crashes at random while gaming and on the internet
I have checked all my drivers and they are up to date. did the hard drive check for bad sectors. the Bios is upto date.
there are 2 xbox remotes connected to the machine, and every so often one makes the usb connected noise. not sure if that is relevant.
oh and rechecked all the connections....twice
have attached the blue screen info and the mini dumps
any help would be much appreciated

http://www.sevenforums.com/bsod-help-support/389391-bsod-6-1-7601-2-1-0-256-1-id-2057-a.html
Relevancy 56.33%

Hi, I've recently installed Windows 7 32bit onto my system, which seemed to be going swimmingly.

Of late however, mainly when watching videos online or sometimes copying files across, the computer reboots and sometimes has an error code Locale ID: 2057 upon startup.

Is this a graphics card compatability problem, or a RAM problem or any other?

Any insight is greatly appreciated.

A:Windows 7 BSOD Code 2057

Could you go into c:\windows\minidump ? Get the latest Minidump file (The first one at the top of the list), and put it in a zip folder. 7Zip is a free program, you could use that. Then Upload it here, so I can see what is causing the BSOD.

http://www.bleepingcomputer.com/forums/t/365205/windows-7-bsod-code-2057/
Relevancy 56.33%

Hello, I hope you can help. My 3 month old Dell goes to blue screen soon after startup. The only program to (visibly) open at start up is Skype. I've checked for viruses and followed your instructions to get to this stage.
Thanks, Bruce

A:BSOD 6.1.7601.2.1.0.768.3 2057 after startup

It is caused by Symantec Endpoint Driver.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 50, {fffff800033e1058, 0, fffff88016736d83, 0}

*** WARNING: Unable to verify timestamp for SRTSPL64.SYS
*** ERROR: Module load completed but symbols could not be loaded for SRTSPL64.SYS

Could not read faulting driver name
Probably caused by : SRTSPL64.SYS ( SRTSPL64+27d83 )

Followup: MachineOwner
---------
Uninstall Norton and all Symentec products using Norton Removal tool. Use Microsoft Security Essentials - Microsoft Windows.

Let us know the results.

http://www.sevenforums.com/bsod-help-support/262440-bsod-6-1-7601-2-1-0-768-3-2057-after-startup.html
Relevancy 56.33%

Occasional BSOD or system freezes for 20-30 seconds, always so far as I remember while using Mozilla (Did upgrade to 8 but have gone back to 7.01)

Recent upgrade to new version of Robotform

Windows patched up to date. Kaspersky 2012

W7 Professional x86 Dell OEM 10/09 not reinstalled.

Problem 1st arose about one month ago. Happens probably once a day

A:BSOD error 1000007e 2057

Hi.

Update software\driver for Arcsoft(R) ASPI Shell (CD/DVD program)

Video Editing Software, Photo Editing Software, 3D Blu-ray Playback Software by ArcSoft
Update software\driver for WinPcap by CACE Technologies

WinPcap ? Commercial and Community Support

Remove kaspersky from your system for testing purposes.

Download,install and use Microsoft Security Essentials with windows firewall enable.
Download and install the new version of Driver Sweeper.
Download the most recent software\driver for your ati AMD Graphics Drivers & Software

Uninstall ati software\driver,restart in safe mode,run driver sweeper,choose only AMD-Display and clean,restart in normal mode.
Install the new ati software\driver,restart.

Update DirectX.
Read carefully the instructions and run NVIDIA/AMD Video Card - Test with OCCT post here the results.

http://www.sevenforums.com/bsod-help-support/202567-bsod-error-1000007e-2057-a.html
Relevancy 56.33%

Hi, I've recently installed Windows 7 32bit onto my system, which seemed to be going swimmingly.

Of late however, mainly when watching videos online or sometimes copying files across, the computer reboots and sometimes has an error Locale ID: 2057 upon startup.

Is this a graphics card compatability problem, or a RAM problem or any other?

Any insight is greatly appreciated.

A:Windows 7 BSOD Code: 2057

I've uploaded the latest minidump here

http://www.techsupportforum.com/forums/f299/windows-7-bsod-code-2057-a-533774.html
Relevancy 56.33%

hi my computer keeps bsoding randomly nothing in common with when it does it that ive noticed here is the error message i get when 2057 randomly BSOD help please local id i boot back up Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode e BCP BCP BCP BCP OS Version Service Pack Product i've also attached the stuff the forum rules say i should so please help also my basic computer infomation provided by dxdiag Operating System Windows Professional -bit Build Service Pack win sp gdr - Language English Regional Setting English System Manufacturer Gigabyte Technology Co Ltd System Model GA- GM-USB BIOS BSOD randomly local id 2057 please help Award Modular BIOS v PG Processor AMD FX tm - Quad-Core Processor CPUs GHz Memory MB RAM Available OS Memory MB RAM Page File MB used MB available Windows Dir C Windows DirectX Version DirectX DX Setup Parameters Not found User DPI Setting Using System DPI System DPI Setting DPI percent DWM DPI Scaling Disabled DxDiag Version bit Unicode

A:BSOD randomly local id 2057 please help

Hello,

Looks like your USB controller driver is at fault here. Do you have a PCI USB 3.0 controller card installed? If so, unplug it for now, and see if the BSODs stop. If not, disable the USB 3.0 controller in the BIOS and see what happens.


Code:
EtronXHCI.sys Wed Jan 26 05:53:57 2011 (4D3FFD45)
Also, install the latest ATI drivers from here: AMD Graphics Drivers & Software


Code:
atikmdag.sys Tue Apr 19 21:53:29 2011 (4DAE3C99)
If that doesn't help, there are definitely other things to try, so be sure to post back!

...Summary of the dumps:

Code:

Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
Debug session time: Sun Jul 8 18:22:47.189 2012 (UTC - 4:00)
System Uptime: 0 days 12:54:49.132
*** WARNING: Unable to verify timestamp for EtronXHCI.sys
*** ERROR: Module load completed but symbols could not be loaded for EtronXHCI.sys
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : EtronXHCI.sys ( EtronXHCI+8faa )
BUGCHECK_STR: 0x1e_0
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0x1e_0_EtronXHCI+8faa
BiosReleaseDate = 11/10/2011
SystemProductName = GA-880GM-USB3
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
Debug session time: Fri Jul 6 17:10:14.281 2012 (UTC - 4:00)
System Uptime: 0 days 4:03:53.827
*** WARNING: Unable to verify timestamp for EtronXHCI.sys
*** ERROR: Module load completed but symbols could not be loaded for EtronXHCI.sys
*** WARNING: Unable to verify timestamp for atikmpag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmpag.sys
Probably caused by : EtronXHCI.sys ( EtronXHCI+8faa )
BUGCHECK_STR: 0x1e_0
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
PROCESS_NAME: TribesAscend.e
FAILURE_BUCKET_ID: X64_0x1e_0_EtronXHCI+8faa
BiosReleaseDate = 11/10/2011
SystemProductName = GA-880GM-USB3
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
Debug session time: Fri Jul 6 12:41:38.518 2012 (UTC - 4:00)
System Uptime: 0 days 1:22:28.064
*** WARNING: Unable to verify timestamp for EtronXHCI.sys
*** ERROR: Module load completed but symbols could not be loaded for EtronXHCI.sys
Probably caused by : EtronXHCI.sys ( EtronXHCI+8faa )
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
BUGCHECK_STR: 0xD1
PROCESS_NAME: Uplay.exe
FAILURE_BUCKET_ID: X64_0xD1_EtronXHCI+8faa
BiosReleaseDate = 11/10/2011
SystemProductName = GA-880GM-USB3
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
Debug session time: Fri Jul 6 11:18:05.430 2012 (UTC - 4:00)
System Uptime: 0 days 6:45:27.585
*** WARNING: Unable to verify timestamp for EtronXHCI.sys
*** ERROR: Module load completed but symbols could not be loaded for EtronXHCI.sys
Probably caused by : EtronXHCI.sys ( EtronXHCI+8faa )
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
BUGCHECK_STR: 0xD1
PROCESS_NAME: iexplore.exe
FAILURE_BUCKET_ID: X64_0xD1_EtronXHCI+8faa
BiosReleaseDate = 11/10/2011
SystemProductName = GA-880GM-USB3
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
Debug session time: Sat Jun 30 14:50:56.010 2012 (UTC - 4:00)
System Uptime: 0 days 10:07:56.556
Probably caused by : avgtdia.sys ( avgtdia+118c )
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
BUGCHECK_STR: 0x3B
PROCESS_NAME: svchost.exe
FAILURE_BUCKET_ID: X64_0x3B_avgtdia+118c
BiosReleaseDate = 11/10/2011
SystemProductName = GA-880GM-USB3
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
Debug session time: Fri Jun 29 08:34:39.641 2012 (UTC - 4:00)
System Uptime: 0 days 1:21:01.... Read more

http://www.sevenforums.com/bsod-help-support/239339-bsod-randomly-local-id-2057-please-help.html
Relevancy 55.9%

Windows Enterprise bit Clean installation to windows from Windows XP professional Hardware months old OS installed weeks ago I am currently facing the lovely BSOD error The computer was recently upgraded from windows XP to idle BSOD - while (Unpredictable) Crashes idle/not computer Windows BSOD - Crashes while computer idle/not idle (Unpredictable) enterprise bit this was a fresh installation from XP The computer originally came with pre installed with Windows installed but was downgraded to XP to meet company IT requirements We have now been given the go ahead to trial windows However after installation we are now facing issues of very random BSOD moments Sometimes while using access or excel At other times the computer could be totally idle I would like to mention BSOD - Crashes while computer idle/not idle (Unpredictable) that our IT team upgraded the RAM in the computer from gb to gb prior to the Windows installation I do have a feeling that there is an issue with the memory which is causing this issue I have attached my BSOD zip pack and would be very appreciative if one of the guru's could assist me on the matter Thanks Wrigh uk

A:BSOD - Crashes while computer idle/not idle (Unpredictable)

perfmon /report shows that these critical chipset drivers aren't installed:





Quote:
Symptom:[IMG]res://wdc.dll/error.gif[/IMG]
Device drivers are not installed.Cause:A driver has not been installed for this device preventing it from working properly.Details:The device driver for PCI Simple Communications Controller has not been installed. This device will not be available until the correct device driver is installed.Resolution:1. Try installing the drivers using Windows Update.
2. Install the drivers that are on the installation media that came with the device.
3. Check with the manufacturer for an updated driver.Related:Explanation of Error Codes Generated by Device Manager

Symptom:[IMG]res://wdc.dll/error.gif[/IMG]
Device drivers are not installed.Cause:A driver has not been installed for this device preventing it from working properly.Details:The device driver for PCI Serial Port has not been installed. This device will not be available until the correct device driver is installed.Resolution:1. Try installing the drivers using Windows Update.
2. Install the drivers that are on the installation media that came with the device.
3. Check with the manufacturer for an updated driver.Related:Explanation of Error Codes Generated by Device Manager


If needed the PnP ID's for these devices are:
Win32_PnPEntity.DeviceID="PCI\\VEN_8086&DEV_3B64&SUBSYS_304B103C&REV_06\\3&21436425&0&B0"
Win32_PnPEntity.DeviceID="PCI\\VEN_8086&DEV_3B67&SUBSYS_304B103C&REV_06\\3&21436425&0&B3"

Only 35 updates since SP1 - most systems have 75 to 80 (or more). Please visit Windows Update and get ALL available updates.

Android Phone USB device may not be working properly. Please uninstall it to see if that helps. Leave it uninstalled until the system is stable again.

There's a fair presence of Symantec in your memory dumps. I'd suggest testing to see if that's the problem. To do that, please try this:
- download a free antivirus for testing purposes: Free AntiVirus
- uninstall Symantec Endpoint Protection
- install the free antivirus and immediately update it
- monitor for further BSOD's

It looks like there's a USB Video device, but we don't have a record of the drivers for it in the DRT (Driver Reference Table located here: Driver Reference Table (DRT) ) I'll have to look them up (and add them to the table) in order to see what device it actually belongs to (I think it's from Magic Control).

Meanwhile I'd check to see if the device that you're using is here: USB Display Adapter-Magic Control Technology Corp.
http://www.sevenforums.com/crashes-d...edictable.html
If so, uninstall the current drivers for it on the system and then download a fresh copy from that website and install them. Ensure that the driver is Win7 compatible BEFORE installing it!!!

If all of this doesn't fix the problem, then we have to start looking at hardware issues. Please try the free diagnostics here: http://www.carrona.org/hwdiag.html

The following info is just FYI, I've already addressed the issues that I saw in the above paragraphs

- Further info on BSOD error messages available at: http://www.carrona.org/bsodindx.html
- Info on how to troubleshoot BSOD's (DRAFT): http://www.carrona.org/userbsod.html
- How I do it: http://www.carrona.org/howidoit.html

3RD PARTY DRIVERS PRESENT IN THE DUMP FILES
Code:

amdxata.sys Fri Mar 19 12:18:18 2010 (4BA3A3CA)
xVgaMini64.sys Wed Jun 23 03:23:16 2010 (4C21B664)
mctkmdldr64.sys Fri Apr 08 04:35:33 2011 (4D9EC8D5)
SRTSP64.SYS Fri Mar 04 15:39:16 2011 (4D714DF4)
SYMEVENT64x86.SYS Thu Mar 24 19:02:36 2011 (4D8BCD8C)
ENG64.SYS Wed Apr 25 05:29:25 2012 (4F97C3F5)
SRTSPX64.SYS Fri Mar 04 15:39:38 2011 (4D714E0A)
wpsdrvnt.sys Thu Apr 28 01:55:04 2011 (4DB90138)
EX64.SYS Wed Apr 25 05:27:28 2012 (4F97C380)
Teefer3.sys ... Read more

http://www.sevenforums.com/bsod-help-support/231073-bsod-crashes-while-computer-idle-not-idle-unpredictable.html
Relevancy 55.9%

struggling to find a solution to this. have checked device manager and all seems ok. any assistance welcome

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 2057
Additional information about the problem:
BCCode: a
BCP1: FFFFF88008F3BFF8
BCP2: 0000000000000002
BCP3: 0000000000000001
BCP4: FFFFF800030261AE
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1
Files that help describe the problem:
C:\Windows\Minidump\082711-21294-01.dmp
C:\Users\NickSheena\AppData\Local\Temp\WER-28017-0.sysdata.xml
Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

A:BSOD 2057 causing random crash

Quiet ANTEC P193 BLACK ATX
Quiet XILENCE 800WATT PSU
2 X ZALMAN 120MM QUIET CASE FAN
INTEL I7 CORE 2 QUAD 960 (3.20GHZ, 8MB L2 CACHE)
Quiet Noctua CPU Heatsink and Cooler
Asus P6TD Deluxe Motherboard
CORSAIR 12GB PC12800 DDR3 1600MHZ RAM
ASUS ATI RADEON HD 5870 1GB PCI-E GRAPHICS CARD
SONY OPTIARC 24X SATA DVD BURNER
LG SATA 10X BLU RAY WRITER / 16X DVD +/- REWRITER
64GB SATA SOLID STATE DRIVE (System Driver)
2000GB S-ATA 7200RPM Hard Drive ( Backup Drive)
7.1 Channel High Definition Sound
2 x 2.0 USB on front
8 x 2.0 USB on Back
2 x 3.0 USB on Back
1 x Firewire Port on Back
802.11N 300mbps PCI Wireless Network Card
Dual Digital TV Tuner card with remote
DH-2CR Multi format INTERNAL CARD READER
MICROSOFT 64BIT WINDOWS 7 ULTIMATE
BULLGUARD INTERNET SECURITY
Nero Burning ROM / Cyberlink PDVD
LG (W2261VP) 22 INCH WIDESCREEN Full HD

http://www.sevenforums.com/bsod-help-support/185327-bsod-2057-causing-random-crash.html
Relevancy 55.9%

Hi,
 
I regularly get BSOD's on my gaming rig (its about 5 months old now). The BSOD happens once a week and I am not sure what is causing it. This is the BSOD information:
 
Problem signature:
  Problem Event Name:    BlueScreen
  OS Version:    6.1.7601.2.1.0.256.1
  Locale ID:    2057
Additional information about the problem:
  BCCode:    1000007e
  BCP1:    FFFFFFFFC0000005
  BCP2:    FFFFF8800F17ADBB
  BCP3:    FFFFF880040B3228
  BCP4:    FFFFF880040B2A80
  OS Version:    6_1_7601
  Service Pack:    1_0
  Product:    256_1
 
I have also uploaded a mini dump file which was produced by the BSOD (I had no permission to attach it). I would be very gratefull if someone can direct me to a solution.
 
Kind Regards
 
Mini dump: https://www.dropbox.com/s/wgscnucgi6alkzk/092714-7503-01.dmp?dl=1

A:BSOD Error: 2057 , BCCode: 1000007e, Help ??

For some reason I wasn't able to open your dropbox file - I found it, but it wouldn't open. However a search around found this article on Sevenforums :
 
http://www.sevenforums.com/bsod-help-support/54442-persistent-stop-error-1000007e.html
 
As you will see, it recommends the use of Memtest86, a free download which you can get from here, along with information on how to use it :
 
http://www.memtest.org/
 
You will need to download memtest and either install it on a USB drive or CD. Note that at least the CD version downloads as an ISO file which may need converting to individual files before you can use it. Read the memtest FAQs !
 
Chris Cosgrove

http://www.bleepingcomputer.com/forums/t/549963/bsod-error-2057-bccode-1000007e-help/
Relevancy 55.9%

When I start web browsing on my computer with a considerable number of tabs open, my computer has a BSOD with a locale ID of '2057'. The information from this is:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 2057

Additional information about the problem:
BCCode: 3b
BCP1: 00000000C0000005
BCP2: FFFFF8800F0F72EC
BCP3: FFFFF8800A7B5950
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\071614-7051-01.dmp
C:\Users\Jordan\AppData\Local\Temp\WER-18844-0.sysdata.xml

Read our privacy statement online:
Microsoft Corporation

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt


How can I stop this from happening?

The dm log collector dump is attached to this thread.

Thanks

A:BSOD Issue 2057 - Intensive Browsing

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 3B, {c0000005, fffff8800f0df2ec, fffff8800b8dc950, 0}

Probably caused by : atikmdag.sys ( atikmdag+b12ec )

Followup: MachineOwner
---------

1: kd> lmvm atikmdag
start end module name
fffff880`0f02e000 fffff880`0ffd7000 atikmdag T (no symbols)
Loaded symbol image file: atikmdag.sys
Image path: \SystemRoot\system32\DRIVERS\atikmdag.sys
Image name: atikmdag.sys
Timestamp: Thu Jul 10 01:04:34 2014 (53BD610A)
CheckSum: 00F46306
ImageSize: 00FA9000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
The error appears to be related to the Radeon HD 6800 display driver, despite it being up to date.

I recommend:
1. Uninstall this driver and all its components completely using the instructions in both links below:

http://support.amd.com/en-us/kb-arti...vers.aspx#Win7

and also...

Drivers - Clean Left over Files after Uninstalling

2. Reboot the computer and run Windows Update immediately.
3. Check the Optional Updates, and select to download and install the Radeon driver offered.

Use that driver (do not update it any further) and see if your system stays stable.

http://www.sevenforums.com/bsod-help-support/338380-bsod-issue-2057-intensive-browsing.html
Relevancy 55.9%

Hi

Please can you help me a friends computer keeps having the BSOD mentioned above i have attached the required log if you could help

Cheers
Andy

http://www.techsupportforum.com/forums/f299/event-100-2057-windows-7-shutdown-bsod-934378.html
Relevancy 54.61%

Hi there I have owned my system for just under a year. I purchased from Overclockers and was overclocked gfx/cpu/mem by themselves. I am an enthusiast but my tech knowledge is very limited. Over the past month or so I have been getting BSOD 2057 messages, recently they are becoming more common.

I would like some help in erradicating this error as it is starting to concern me that I may be damaging my computer in some way.

I have attached all necessary files and I eagerly await your support.

Thanks for your time,

Jonathan

A:BSOD 2057 - Mainly playing games or using Media Center - frustrating

Hello,

All of your crash files are blaming hardware. Please do the following instructions:





Quote:
BugCheck 0x124


   Warning
Before you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. WARNING: The steps that follow can void your warranty!!!

For your hardware stop 0x124 crash, read through Stop 0x124 - what it means and what to try and use the following hardware checks to supplement that link.
If you are overclocking any hardware, please stop.

If you have an SSD, make sure the following are up to date:SSD firmware
BIOS Version
Chipset Drivers
Hard disk controller drivers/SATA drivers
If you have a Marvell IDE ATA/ATAPI device, make sure the drivers are up to date from the Intel site or Marvell site and not from your motherboard/vendor support site.

Run all but the advanced tests with SeaTools for HDDs.SeaTools for Windows

SeaTools for DOS
Monitor temperatures during the following tests. Use the following programs to monitor the temperatures. Real Temp is a good CPU temperature monitor.
Speccy - System Information - Free Download will monitor all hardware temperatures.
HWiNFO, HWiNFO32 & HWiNFO64 - Hardware Information and Analysis Tools can be inaccurate for CPU temperatures, but is a good program for GPU temperature monitoring.
Use FurMark: VGA Stress Test, Graphics Card and GPU Stability Test, Burn-in Test, OpenGL Benchmark and GPU Temperature | oZone3D.Net to test the graphics card GPU. Let it run until the GPU temperatures even out or until the GPU temperatures reach a dangerous level (you can find the max temperature for your card on either the nVidia or AMD sites; if you are not sure, ask us). The goal is to get a steady temperature, find out if the GPU is overheating, or to see if there are any artifacts present in the test itself: look for strange pixelated patterns on the screen or colors that do not look like they belong. Then use the |MG| Video Memory Stress Test 1.7.116 Download to test your graphics card memory. Let the memory test run for at least seven passes; the more the better.

Run Hardware - Stress Test With Prime95 to determine any hardware problems. Run all three tests for a few hours each. If you get errors, stop the test and post back here.

Follow the steps for doing CPU stress test using IntelBurnTest

Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).

For Part 3: If You Have Errors: If you swap any memory components, follow these steps for ESD safety:Shut down and turn off your computer.
Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working. If you do not have an anti-static workbench, desk, or pad, you can use your computer tower/case by finding a metal hold in it, such as a drive bay.
Once these steps have been followed, it is safe to remove and replace components within your computer.

Coutesy of: writhziden


After, Post back results.

-Justin

http://www.sevenforums.com/bsod-help-support/247987-bsod-2057-mainly-playing-games-using-media-center-frustrating.html
Relevancy 54.61%
A:BSOD When playing games and watching media error 2057

Please follow the Blue Screen of Death (BSOD) Posting Instructions

http://www.sevenforums.com/bsod-help-support/282430-bsod-when-playing-games-watching-media-error-2057-a.html
Relevancy 54.18%

Logfile of Trend Micro HijackThis v BETA Scan saved at PM on Platform Windows XP SP WinNT Boot mode Normal Running processes C WINDOWS System smss exe C WINDOWS system winlogon exe C WINDOWS system services exe C WINDOWS system lsass exe C WINDOWS system svchost exe C WINDOWS System svchost exe C WINDOWS system spoolsv exe C WINDOWS Explorer EXE C WINDOWS system RunDLL exe C WINDOWS stsystra exe C Program Files Creative Shared Files Module Loader DLLML exe C Program Files Trend Micro Internet Security pccguide exe C Program Files Creative Sound Blaster the please whilst internet on help..serious issues whilst gaming..and perhas latency X-Fi DVDAudio CTDVDDET EXE C WINDOWS CTHELPER EXE C WINDOWS system CTXFIHLP EXE C Program Files Adobe Photoshop Album Starter Edition Apps apdproxy exe C Program Files Common Files Logitech LCD Manager lcdmon exe C Program Files Common Files Logitech G-series Software LGDCore exe C WINDOWS SYSTEM CTXFISPI EXE C Program Files iTunes iTunesHelper exe C Program Files Trend Micro Internet Security please help..serious latency issues whilst gaming..and perhas whilst on the internet TMAS OE TMAS OEMon exe C Program Files Common Files Logitech LCD Manager Applets please help..serious latency issues whilst gaming..and perhas whilst on the internet LCDClock exe C Program Files Google GoogleToolbarNotifier GoogleToolbarNotifier exe C Program Files Common Files Logitech LCD Manager Applets LCDCountdown exe C Program Files Common Files Logitech LCD Manager Applets LCDPOP exe C Program Files Common Files Logitech LCD Manager Applets LCDMedia exe C WINDOWS system ctfmon exe C Program Files Logitech Desktop Messenger Program LogitechDesktopMessenger exe C Program Files Logitech SetPoint KEM exe C Program Files Logitech SetPoint KHALMNPR EXE C Program Files Common Files Apple Mobile Device Support bin AppleMobileDeviceService exe C WINDOWS system CTsvcCDA exe C Program Files Common Files Microsoft Shared VS DEBUG MDM EXE C WINDOWS system nvsvc exe C PROGRA TRENDM INTERN PcCtlCom exe C WINDOWS system svchost exe C PROGRA TRENDM INTERN Tmntsrv exe C PROGRA TRENDM INTERN tmproxy exe C PROGRA TRENDM INTERN TmPfw exe C Program Files iPod bin iPodService exe C WINDOWS System svchost exe C Program Files Internet Explorer iexplore exe C WINDOWS Network Diagnostic xpnetdiag exe C Documents and Settings Jesse Jhon Andrews Desktop HiJackThis v exe R - HKLM Software Microsoft Internet Explorer Main Default Page URL http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Main Default Search URL http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Main Search Page http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Main Start Page http go microsoft com fwlink LinkId R - HKCU Software Microsoft Windows CurrentVersion Internet Settings ProxyOverride localhost O - BHO no name - D -C F - efb- B - ECA - no file O - BHO Adobe PDF Reader Link Helper - E F-C D - D -B D- B D BE B - C Program Files Common Files Adobe Acrobat ActiveX AcroIEHelper dll O - BHO Google Toolbar Helper - AA ED - DD- d - -CF F - c program files google googletoolbar dll O - BHO Google Toolbar Notifier BHO - AF DE - D - -B FA-CE B AD D - C Program Files Google GoogleToolbarNotifier swg dll O - Toolbar amp Google - C B - - d - B - A CD F - c program files google googletoolbar dll O - HKLM Run NvCplDaemon RUNDLL EXE C WINDOWS system NvCpl dll NvStartup O - HKLM Run NvMediaCenter RunDLL exe NvMCTray dll NvTaskbarInit O - HKLM Run SigmatelSysTrayApp stsystra exe O - HKLM Run AudioDrvEmulator quot C Program Files Creative Shared Files Module Loader DLLML exe quot - AudioDrvEmulator quot C Program Files Creative Shared Files Module Loader Audio Emulator AudDrvEm dll quot O - HKLM Run pccguide exe quot C Program Files Trend Micro Internet Security pccguide exe quot O - HKLM Run CTDVDDET quot C Program Files Creative Sound Blaster X-Fi DVDAudio CTDVDDET EXE quot O - HKLM Run VolPanel q... Read more

https://forums.techguy.org/threads/please-help-serious-latency-issues-whilst-gaming-and-perhas-whilst-on-the-internet.657804/
Relevancy 54.18%

Hi,

I've been having numerous blue screens in the last 3 weeks. My computer will be working as normal; but somedays it boots a little slow and then proceeds to BlueScreen within 5 minutes seemingly regardless of task.

Please help in anyway you can; I hate having a powerful PC be voided by continual BSOD.

Thanks

A:Multiple BSOD, TF2+Chrome, Skyrim+Task manager - LocaleID 2057

Hi PeacheyA.

Uninstall your installed version of the display driver.
How-To Uninstall AMD Catalyst Drivers From A Windows Based System
Then clean up any possible leftover.
Drivers - Clean Left over Files after Uninstalling
Then install version 13.9 WHQL only.
Previous AMD Catalyst? Display Drivers
Lately we have seen a lot of issues with the latest 13.12 WHQL AMD Catalyst.

When the driver is changed, Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

Let us know the results.
____________________________________________

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 119, {1, 6b89, 6e33, 6e32}

*** WARNING: Unable to verify timestamp for atikmpag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmpag.sys
Probably caused by : atikmpag.sys ( atikmpag+45b36 )

Followup: MachineOwner
---------

6: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

VIDEO_SCHEDULER_INTERNAL_ERROR (119)
The video scheduler has detected that fatal violation has occurred. This resulted
in a condition that video scheduler can no longer progress. Any other values after
parameter 1 must be individually examined according to the subtype.
Arguments:
Arg1: 0000000000000001, The driver has reported an invalid fence ID.
Arg2: 0000000000006b89
Arg3: 0000000000006e33
Arg4: 0000000000006e32

Debugging Details:
------------------
CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

BUGCHECK_STR: 0x119

PROCESS_NAME: System

CURRENT_IRQL: a

ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) amd64fre

DPC_STACK_BASE: FFFFF88003146FB0

LAST_CONTROL_TRANSFER: from fffff88003dc622f to fffff80003490bc0

STACK_TEXT:
fffff880`0313f3d8 fffff880`03dc622f : 00000000`00000119 00000000`00000001 00000000`00006b89 00000000`00006e33 : nt!KeBugCheckEx
fffff880`0313f3e0 fffff880`04e07ec5 : fffffa80`00000004 00000000`00006b89 00000000`00000000 00000000`00006e33 : watchdog!WdLogEvent5+0x11b
fffff880`0313f430 fffff880`04e08131 : fffffa80`0aab1000 fffff880`0313f570 fffff880`000011ac 00000000`00000000 : dxgmms1!VidSchiVerifyDriverReportedFenceId+0xad
fffff880`0313f460 fffff880`04e07f82 : fffffa80`00006b89 00000000`00000000 fffffa80`0aa39000 00000000`00000000 : dxgmms1!VidSchDdiNotifyInterruptWorker+0x19d
fffff880`0313f4b0 fffff880`04ef113f : fffffa80`09af2480 00000000`00000000 00000000`0a717001 00000000`00000000 : dxgmms1!VidSchDdiNotifyInterrupt+0x9e
fffff880`0313f4e0 fffff880`04845b36 : 00000000`00000000 00000000`00000001 fffff880`0313f599 00000000`00000000 : dxgkrnl!DxgNotifyInterruptCB+0x83
fffff880`0313f510 00000000`00000000 : 00000000`00000001 fffff880`0313f599 00000000`00000000 fffff880`0313f5d0 : atikmpag+0x45b36
STACK_COMMAND: kb

FOLLOWUP_IP:
atikmpag+45b36
fffff880`04845b36 ?? ???

SYMBOL_STACK_INDEX: 6

SYMBOL_NAME: atikmpag+45b36

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: atikmpag

IMAGE_NAME: atikmpag.sys

DEBUG_FLR_IMAGE_TIMESTAMP: 52a231d9

FAILURE_BUCKET_ID: X64_0x119_1_DRIVER_REPORTED_INVALID_FENCE_ID_atikmpag+45b36

BUCKET_ID: X64_0x119_1_DRIVER_REPORTED_INVALID_FENCE_ID_atikmpag+45b36

ANALYSIS_SOURCE: KM

FAILURE_ID_HASH_STRING: km:x64_0x119_1_driver_reported_... Read more

http://www.sevenforums.com/bsod-help-support/328097-multiple-bsod-tf2-chrome-skyrim-task-manager-localeid-2057-a.html
Relevancy 54.18%

Hi all really getting a headache trying to fix my mums laptop out but I am struggling miserably BSOD's whilst also reinst Windows [SOLVED] trying while - BSOD's now Vista bootup, to I have no idea what she has done obviously claiming to have done nothing but basically I got [SOLVED] Windows Vista - BSOD's while trying to bootup, now also BSOD's whilst reinst a text this morning asking me to take a look at the [SOLVED] Windows Vista - BSOD's while trying to bootup, now also BSOD's whilst reinst laptop because it wont turn on First thing is the Windows bootup screen improper shutdown asking to boot in [SOLVED] Windows Vista - BSOD's while trying to bootup, now also BSOD's whilst reinst safemode normal etc I chose normal and just as it was about to boot into Windows a fast BSOD appeared for a split second and then the laptop restarted to the same screen This time I chose Last known configuration same happened The BSOD's were so fast I cannot get a glance at it I tried in safe mode and it seemed fine but I didnt know what I should try to do So I did a system restore and this worked ok but again it wouldnt boot up After hours of trying I googled some and downloaded Windows Vista Recovery Disc and I attempted the Automatic System Repair but it told me failed to detect any problems Tried it again and same So then I attempted to boot it back up but nope BSOD again The laptop did come with a typical recovery disc but I am unable to find that and the Windows Vista label is stuck underneath the Laptop so I downloaded a copy of Windows Vista to install and I managed to format the harddrive Now this is what bugs me I cannot even install a fresh copy of Windows I am actually trying again as we speak but even whilst quot Copying the files quot on the Windows installation it BSOD's on that too Like I said I was unable to even get a glance at the BSOD messages whilst windows was installed on those boot up failures however the BSOD messages whilst trying to install Windows are very readable as they do not disappear The first one I recall mentioning NTFS or NTSF dot sys ntfs sys The second one I only recall the top line which was MEMORY MANAGEMENT And the third one which I was just about to write in detail as it was still on my screen has just disappeared It was again a totally different message though Im very confused and it makes it worse because Ive built several PCs so I know the insides of those quite well and also have plenty of spare parts but not for laptops I have never even seen inside of a laptop before and certainly have no spare parts to test out Anyone able to help me out with this I feel The laptop is a Packard Bell SJ

A:[SOLVED] Windows Vista - BSOD's while trying to bootup, now also BSOD's whilst reinst

Memory_Management

STOP: 0x000000001A (0x00041284. 0xA4884001....




I just tried again for 4th time and I managed to type this much above ^^ before the laptop restarted itself :(

http://www.techsupportforum.com/forums/f299/solved-windows-vista-bsods-while-trying-to-bootup-now-also-bsods-whilst-reinst-515393.html
Relevancy 53.32%

Not sure what is going wrong with my comp, i recently over clocked it and set it to 4.0GHz if that helps?

A:BSOD whilst playing Games, also sometimes just randomly BSOD

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033

Additional information about the problem:
BCCode: 124
BCP1: 0000000000000000
BCP2: FFFFFA800881A038
BCP3: 00000000BE000000
BCP4: 000000000100110A
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\011015-18454-01.dmp
C:\Users\Hayden\AppData\Local\Temp\WER-17960332-0.sysdata.xml

http://www.sevenforums.com/bsod-help-support/357932-bsod-whilst-playing-games-also-sometimes-just-randomly-bsod.html
Relevancy 52.46%

Need help for this problem. blue screen appears and restart occurs while using the system please help immediately.
problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: d1
BCP1: 000000000000001C
BCP2: 0000000000000002
BCP3: 0000000000000001
BCP4: FFFFF88001663C9E
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\021615-21247-01.dmp
C:\Users\Admin\AppData\Local\Temp\WER-47705-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

A:BSOD Locale ID: 1033

Please follow Blue Screen of Death (BSOD) Posting Instructions to grab all and upload a report here.

http://www.sevenforums.com/bsod-help-support/361545-bsod-locale-id-1033-a.html
Relevancy 52.46%

i have tried everything u mentioned.but same problem repeats.i have attached recent zip of bsod.pl help me
? OS - Windows 7
? x64
? Windows 7 Home Premium
? OEM version (came pre-installed on system)
? Age-2.5 years
? Age of OS installation - yes. 2 days

? CPU-Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz
? Video Card-ATI Mobility Radeon HD 5000 Series
? MotherBoard-intel
? Power Supply - dell & 90W

? System Manufacturer - dell
? Exact model number -studio 1558

A:bsod locale id 1033

Hello and welcome to TSF,

Recommendations

SP1
I have noticed you do not have SP1 installed on your system. Please install SP1 using this link: Download.


Quote:




Choose either the 32-bit (x86) or the 64-bit (x64) version of SP1 depending on whether you're running the 32-bit or the 64-bit version of Windows 7, and then click Download.
To find out which version you're running, click the Start button The Start button, right-click Computer, and then click Properties. Under System, next to System type, you can view the operating system.
To install SP1 immediately, click Open or Run, and then follow the instructions on your screen. To install SP1 later, click Save and download the installation file to your computer. When you're ready to install SP1, double-click the file.
On the Install Windows 7 Service Pack 1 page, click Next.
Follow the instructions on your screen. Your computer might restart during the installation.
After installation is complete, log on to your computer at the Windows logon prompt. You might see a notification indicating whether the update was successful.





Problem Devices

Code:
Not Available ACPI\SMO8800\1 The drivers for this device are not installed.
Please install the drivers for this device as devices without drivers can cause stability issues. To work out what the problem device is, open device manager and look for any yellow exclamation marks.

System Optimisors

Code:
AVG PC Tuneup 2011
TuneUp Utilities 2011
This software is a known cause of BSOD's. Most people here do not recommend the use of automatic optimisation tools for Windows 7. Microsoft have improved Windows 7 significantly and it is much better at organising and optimising itself than its predecessors. Windows 7 is not XP. Automated optimisation software can delete important registry entries that can cause multiple problems with windows 7.

If you feel the need to use a registry cleaning or optimisation software, I recommend the use of CCleaner but make sure you back up the registry before making letting ccleaner delete anything.
I also recommend the use of Puran Defrag to defragment your HDD. Check the "Boost Overall System Speed By Puran Intelligent Optimizer (PIZOR) under additional operations.

BSOD Analysis

Graphics Drivers
Your BSOD dumps point to your ATI/AMD graphics card drivers. To remedy this, please update the drivers to the latest version. To do so correctly, please follow these steps.
Download the drivers you want for your display card(s)
Click Start Menu
Click Control Panel
Click Uninstall a program
Uninstall AMD Catalyst Install Manager if it is listed (this should remove all AMD graphics software and drivers)
If AMD Catalyst Install Manager is not listed, use the following method to uninstall the graphics drivers (this applies to on-board graphics, as well):Click Start Menu
Right Click My Computer/Computer
Click Manage
Click Device Manager from the list on the left
Expand Display adapters
Do the following for each adapter (in case you have multiple display cards)

Right click the adapter
Click Uninstall (do not click OK in the dialog box that pops up after hitting Uninstall)
Put a tick in Delete driver software for this device (if this option is available, otherwise just hit OK) and hit OK


If this doesn?t work, try this method:
Login as an administrative user
Click Start Menu
Click Control Panel
Click Hardware and Sound
Click Device Manager (the last link under Devices and Printers)
Expand Display adapters
Do the following for each adapter (in case you have multiple display cards)Right click the adapter
Click Uninstall (do not click OK in the dialog box that pops up after hitting Uninstall)
Put a tick in Delete driver software for this device (if this option is available, otherwise just hit OK) and hit OK


Once the drivers have been uninstalled, reboot your PC. Then install the driver you downloaded earlier once Windows starts. If there are issues... Read more

http://www.techsupportforum.com/forums/f299/bsod-locale-id-1033-a-660496.html
Relevancy 52.46%

Got a BSOD here. I've included the Minidump. Any help?

I also get intermittent beeps from the laptop.

A:BSOD Locale ID 1033

Crash was caused by your Atheros network driver.


Code:
athrx.sys Tue May 24 03:24:19 2011 (4DDB5D23)
Without a full report I don't know what type of network card you have. Whatever it is, go to the manufacturer site and get the latest drivers. If you already have the latest then uninstall your device from device manager and make sure you select the option to remove driver software. Reboot and then install the latest drivers

Will you please also upload a report
http://www.techsupportforum.com/foru...ta-452654.html

BSOD BUGCHECK SUMMARY

Code:

Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Sun Feb 19 04:58:18.702 2012 (UTC - 5:00)
System Uptime: 0 days 15:56:01.138
*** WARNING: Unable to verify timestamp for athrx.sys
*** ERROR: Module load completed but symbols could not be loaded for athrx.sys
Probably caused by : athrx.sys ( athrx+88b76 )
BUGCHECK_STR: 0xD1
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0xD1_athrx+88b76
BiosReleaseDate = 09/16/2011
SystemManufacturer = Gateway
SystemProductName = NV55S
??????????????????????????????????????????????????????????????????????????????????????``

http://www.techsupportforum.com/forums/f299/bsod-locale-id-1033-a-631323.html
Relevancy 52.46%

I have been Fightting this BSOD for months ID:1033 Locale BSOD now I give up please some one help me These are the windows errors codes i been getting I updated got BSOD Locale ID:1033 rid of my old graphic card drivers with the newest one from ATI attached are zip minidump file for debugging if some one can help thanks problem signature Problem Event BSOD Locale ID:1033 Name BlueScreen OS Version Locale ID Additional information about the problem BCCode d BCP BCP BCP BCP OS Version Service Pack Product Files that help describe the problem C Windows Minidump - - dmp C Users Charlie AppData Local Temp WER- - sysdata xml Read our privacy statement online Windows Privacy Statement - Microsoft Windows If the online privacy statement is not available please read our privacy statement offline C Windows system en-US erofflps txt roblem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode b BCP C BCP FFFFF A EFE BCP FFFFF D BCP OS Version Service Pack Product Files that help describe the problem C Windows Minidump - - dmp C Users Charlie AppData Local Temp WER- - sysdata xml Read our privacy statement online Windows Privacy Statement - Microsoft Windows If the online privacy statement is not available please read our privacy statement offline C Windows system en-US erofflps txt

A:BSOD Locale ID:1033

Run a RAM Test and a CPU Stress Test

Scan your system with Malwarebytes

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arguments:
Arg1: 0000000000000000, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000008, value 0 = read operation, 1 = write operation
Arg4: 0000000000000000, address which referenced memory

Debugging Details:
------------------
READ_ADDRESS: GetPointerFromAddress: unable to read from fffff80002cf90e0
0000000000000000

CURRENT_IRQL: 2

FAULTING_IP:
+0
00000000`00000000 ?? ???

PROCESS_NAME: RelPost.exe

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

BUGCHECK_STR: 0xD1

TRAP_FRAME: fffff88003b8c100 -- (.trap 0xfffff88003b8c100)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000000 rbx=0000000000000000 rcx=00000000b0dabbdb
rdx=000000006d95f2ef rsi=0000000000000000 rdi=0000000000000000
rip=0000000000000000 rsp=fffff88003b8c290 rbp=0000000000ce0000
r8=0000000000004600 r9=fffff88003b8c3d0 r10=fffff88003b8c3c0
r11=fffff8800113b800 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei pl nz na pe nc
00000000`00000000 ?? ???
Resetting default scope

LAST_CONTROL_TRANSFER: from fffff80002ac0c69 to fffff80002ac1700

FAILED_INSTRUCTION_ADDRESS:
+0
00000000`00000000 ?? ???

STACK_TEXT:
fffff880`03b8c290 fffff880`03b8c7e0 : 00000000`00000030 00000000`00000030 fffff880`010f049f fffff880`6251a49e : 0x0
fffff880`03b8c298 00000000`00000030 : 00000000`00000030 fffff880`010f049f fffff880`6251a49e 00000000`00000030 : 0xfffff880`03b8c7e0
fffff880`03b8c2a0 00000000`00000030 : fffff880`010f049f fffff880`6251a49e 00000000`00000030 fffff880`03b8c6a0 : 0x30
fffff880`03b8c2a8 fffff880`010f049f : fffff880`6251a49e 00000000`00000030 fffff880`03b8c6a0 00000000`0000000e : 0x30
fffff880`03b8c2b0 fffff880`010f43b4 : fffff880`03b8c7e0 fffff880`010f1900 fffff880`03b8c818 00000000`00000030 : cng!AesCtrRng_Generate+0x100
fffff880`03b8c770 fffff880`010f143f : 00000000`00000000 00000000`00000002 00000000`00000030 fffffa80`039cad58 : cng!GetMasterPrngOutput+0x54
fffff880`03b8c7b0 fffff880`010efe45 : fffffa80`05df2d60 fffff880`03b8ca18 00000000`00000000 00000000`00390008 : cng!SystemPrng+0x1cf
fffff880`03b8c880 fffff880`0121130b : 00000000`20206f49 fffff880`03b8ca18 fffff880`03b8cca0 00000000`20206f49 : cng!CngDeviceControl+0x65
fffff880`03b8c980 fffff880`012111f7 : fffffa80`064cd3b0 00000000`00390008 fffffa80`039ca060 00000000`00000001 : ksecdd!KsecDeviceControl+0x5b
fffff880`03b8c9d0 fffff800`02ddb467 : fffffa80`0623ff20 fffff880`00000030 fffffa80`0623ff20 fffffa80`064cd2e0 : ksecdd!KsecDispatch+0x97
fffff880`03b8ca10 fffff800`02ddbcc6 : 00000000`00def6b8 00000000`00000000 00000000`00000000 00000000`00000000 : nt!IopXxxControlFile+0x607
fffff880`03b8cb40 fffff800`02ac0953 : fffffa80`06291060 00000000`00def698 fffff880`03b8cbc8 00000000`00000000 : nt!NtDeviceIoControlFile+0x56
fffff880`03b8cbb0 00000000`76eef72a : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
00000000`00def208 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x76eef72a
STACK_COMMAND: .trap 0xfffff88003b8c100 ; kb

FOLLOWUP_IP:
cng!AesCt... Read more

http://www.sevenforums.com/bsod-help-support/175085-bsod-locale-id-1033-a.html