Windows Support Forum

Repeated BSOD - Memory Management, Attempt to Page a Non-Pageable area

Q: Repeated BSOD - Memory Management, Attempt to Page a Non-Pageable area

My Dell PC started getting regular BSODs a couple of weeks ago and is now crashing several times a day. I can't detect any correlation with what is going on at the time - sometimes it falls over straight away, sometimes it will run fine for hours.

I have run MemTest repeatedly but it has not shown up any problems.

Amongst the errors I have seen are Memory Management, and Error Paging a Non-Pageable Area.
I have attached the dump files extracted using the tool - if anyone can tell me what is suddenly causing this to happen I would be very grateful!

Geoff

Relevancy 100%
Preferred Solution: Repeated BSOD - Memory Management, Attempt to Page a Non-Pageable area

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Repeated BSOD - Memory Management, Attempt to Page a Non-Pageable area

Hi Geoff2000,

I have analyzed the blue screen dumps and it appears the root cause is ntoskrnl.exe file. It is a operating system core file and the error might point towards a corruption in the file. I also found that the blue screen error code was 0x0000003b. It is usually a graphic's driver (display adapter/video driver), other possibilities include but are not limited to antivirus/antispyware/security programs and even memory (mapping).

BCCode: 3b 0x0000003b

Cause

This error has been linked to excessive paged pool usage and may occur due to user-mode graphics drivers crossing over and passing bad data to the kernel code.

Resolution

I would suggest you to run inbuilt Dell diagnostics to check the system for any hardware faults :
Power on the system
Press F12 when you see Dell logo
Highlight Diagnostics and press Enter
Note down error messages, if any, and share the findings

If hardware diagnostics pass, the issue might be related to OS or software/drivers. You may try to update the chipset drivers from Here and graphics driver from Here and see if it helps.

You may also try updating the video drivers directly from manufacturer (nVidia) Here.

If the issue persists, you may check and clean the system from any dust on fans, memory, video card, motherboard etc. You may also try reseating memory and video card. If it doesn't help, try using the system without video card to isolate whether video card is point of failure or not. You may refer to step by step instructions in XPS 8100 service manual Here for reseating/removing components.

Note : Please follow the safety instructions given in manual before removing any parts.

Please reply with the findings. Will take it further from there.

http://www.sevenforums.com/bsod-help-support/306145-repeated-bsod-memory-management-attempt-page-non-pageable-area.html
Relevancy 111.37%

Hi,

This is the first time that I've experienced this error(s) resulting in multiple BSODs. So far, I've tried clearing my cache, removing adware and scanning my files using sfc/scannow but the error(s) still persists. Hope that I can get some advice/help on what I can do to remove the error(s) here. =(

A:BSOD (Memory Management, Page Fault in Non-paged Area)

Hi Xenoda.

First of all, the msinfo32.nfo file included in the zip is not complete. So we are not having some very important info there. Upload your MSINFO32.nfo file again.
Click on the start button
Type "msinfo32" (without quotes) in the search bar of the start menu, click the resulting link. It will open the System Information window.
File>Save. In the "File Name" filed, put "MSINFO32" (without Quote), give the save location to desktop, and click the "save" button.
Give the time for processing, it will save a .nfo file on your desktop.
Zip it, and upload it following the instruction.
In the mean time, as the BSODs are memory related (may be a failing RAM or may be any driver passing bad info to the memory), Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Let us know the result.
check iaStor in the msinfo32

http://www.sevenforums.com/bsod-help-support/338477-bsod-memory-management-page-fault-non-paged-area.html
Relevancy 111.37%

Hello,

I built my computer about six months ago and have been having sporadic BSOD problems since day one. I have tried everything I know to do and gotten nowhere. I'm running 7 Professional x64 retail, and this is the first install of it. My computer seems to give me a BSOD within a few minutes of booting up, sometimes it is memory management, other times it is page fault in non paged area. I have ran whocrashed and it has almost always pointed to nfts.sys or ntoskrnl.exe. I've ran memtest 86+ 4.10 for 4 passes and found nothing wrong. Any help would be appreciated. Thanks

- Tom

A:BSOD - Memory Management and Page Fault In Non Paged Area

BSOD errors: 3B {c0000005}, 50 (Pool corruption), 24 (ntfs_file_system).

Update drivers listed bellow and if crashes persist test your hardware - memory, hard disk, video card.
~~~~~~~~

Majority of your most recent crashes were caused by the ATI driver 3B {c0000005}:

atikmdag.sys Wed Apr 07 04:47:17 2010

The latest is August 26 2010. Update it. Uninstall the ATI driver and software completely. Boot to safe mode and sweep ATI remnants with driver sweeper Guru3D - Driver Sweeper.




Update:

atikmdag.sys Wed Apr 07 04:47:17 2010
ATI

SCDEmu.SYS Mon Nov 09 05:27:29 2009
PowerISO

athurx.sys Tue Jan 05 05:23:16 2010
Atheros Wireless CB42/CB43/MB42/MB43 Network Adapter




Ensure that all clocks are set as recommended by the manufacturer. Test your memory and the video card:

RAM - Test with Memtest86+

FurMark: VGA Stress Test, Graphics Card and GPU Stability Test, OpenGL Benchmark and GPU Temperature


You have other recent crashes caused by fileinfo.sys and ntfs.sys bugcheck: 24. Check your hard drives for errors:

Disk Check

HDD diagnostics:

HD Diagnostic




Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [F:\a\Minidump\D M P\101110-20436-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\websymbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (3 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Machine Name:
Kernel base = 0xfffff800`02c51000 PsLoadedModuleList = 0xfffff800`02e8ee50
Debug session time: Tue Oct 12 05:09:56.332 2010 (UTC - 5:00)
System Uptime: 0 days 0:00:18.002
Loading Kernel Symbols
...............................................................
................................................................

Loading User Symbols
Loading unloaded module list
....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 3B, {c0000005, fffff8800498e141, fffff88005cfda40, 0}

Probably caused by : atikmdag.sys ( atikmdag+38a141 )

Followup: MachineOwner
---------

1: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff8800498e141, Address of the instruction which caused the bugcheck
Arg3: fffff88005cfda40, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.

Debugging Details:
------------------


EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - <Unable to get error code text>

FAULTING_IP:
atikmdag+38a141
fffff880`0498e141 488b01 mov rax,qword ptr [rcx]

CONTEXT: fffff88005cfda40 -- (.cxr 0xfffff88005cfda40)
rax=fffffa8005d00a80 rbx=fffffa8005d00a80 rcx=0000000000000000
rdx=fffffa8005f593f8 rsi=fffffa8005f59020 rdi=fffffa8005f59418
rip=fffff8800498e141 rsp=fffff88005cfe410 rbp=0000000000000000
r8=0000000000000000... Read more

http://www.sevenforums.com/bsod-help-support/118872-bsod-memory-management-page-fault-non-paged-area.html
Relevancy 111.37%

Hey guys, just got a new PC.

Board: Sabertooth P67
CPU: Intel Core i7 2600 3.4GHz
Grafics: Asus Radeon HD 6770 1GB GDDR5
Memory: Corsair Vengeance 2x4GB 1600 (CMZ8GX3M2A1600C9)

The thing is.. at first it installed allright with everything inside.. then it crashed like 2 times and i didnt bother too much.. until i couldnt log in anymore. i tried rising the voltage on the RAM to 1.52.. changed the Command Rate to 2.. but OS dont run with both plugged in.. i can only run OS with only 1 stick plugged.. i already interchanged them.. they both work fine (ie. no BSOD) single.. if i put them both plugged OS dont run (it stops when its loading windows.. ie. windows logo dont appear and it doesnt move anymore)

Hope this helped you understand,

CrYser

A:Memory Management/Page fault in nonpaged area BSOD

SABERTOOTH-P67 BIOS 2103 improves memory compatibility and system stability. What is your bios?

http://www.sevenforums.com/bsod-help-support/208776-memory-management-page-fault-nonpaged-area-bsod.html
Relevancy 111.37%

All I built my PC in Ever since I have been having intermittent FAULT AREA PAGE MANAGEMENT - NON and MEMORY IN PAGED BSOD BSOD problems I've found that if I put the computer to sleep instead of shutting down when it boots stable it will remain stable Otherwise I have BSOD crashes - minutes after booting I've run memtest after crashes and had it report errors but if I remove the RAM re-insert it and run memtest no errors will be BSOD - MEMORY MANAGEMENT and PAGE FAULT IN NON PAGED AREA reported It also typically remains stable if I boot after inserting the RAM Anyway this is getting to be a pain and I'm trying to BSOD - MEMORY MANAGEMENT and PAGE FAULT IN NON PAGED AREA work something out I BSOD - MEMORY MANAGEMENT and PAGE FAULT IN NON PAGED AREA posted before and the last piece of advice I received was as follows quot That is not unusual electronics are just that way when memtest shows errors it means there is a problem Even if it doesn't show any errors the run before and the run after An error with X GB installed and then no errors with X GB installed usually indicates a timing and or voltage adjustment is needed It is still possible that the RAM is faulty let's try some adjustments and see if it will run stable CPUZ is showing your CR at T go to BIOS and select T again save and exit BIOS Then check CPUZ Memory tab and see if it says CR T Go to DRAM timings and change 'cycle time tRAS ' to this will be the th item in BIOS -DDR Timings Items When changed it should read for the first timings Bump your CPU NB voltage to v or as close as you can get it to that number Save and exit BIOS Then run memtest again both RAM cards installed for a minimum of passes best to run overnight quot Having done this memtest reported erros Should I just pick up some new sticks of RAM or do you think this is something else Thanks for all the help Tom

A:BSOD - MEMORY MANAGEMENT and PAGE FAULT IN NON PAGED AREA

Upload your MSINFO32.nfo file.
Click on the start button
Type "msinfo32" (without quotes) in the search bar of the start menu, click the resulting link. It will open the System Information window.
File>Save. In the "File Name" filed, put "MSINFO32" (without Quote), give the save location to desktop, and click the "save" button.
Give the time for processing, it will save a .nfo file on your desktop.
Zip it, and upload it following the instruction.
______________________________________________________________________________________________

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck F4, {3, fffffa8004764b30, fffffa8004764e10, fffff800037cb0d0}

----- ETW minidump data unavailable-----
Probably caused by : wininit.exe

Followup: MachineOwner
---------

http://www.sevenforums.com/bsod-help-support/310674-bsod-memory-management-page-fault-non-paged-area.html
Relevancy 111.37%

I just bought my new laptop 1 month ago, but BSOD occurred for many times. Can anyone help me to solve this problem? the minidump files are attached here. Thanks for helping.

Window 7 Home Premium

System

Manufacturer Hewlett-Packard
Model HP G42 Notebook PC
Total amount of system memory 4.00 GB RAM
System type 64-bit operating system
Number of processor cores 2

Storage

Total size of hard disk(s) 596 GB

Graphics

Display adapter type ATI Mobility Radeon HD 6370
Total available graphics memory 2746 MB
Dedicated graphics memory 1024 MB
Dedicated system memory 0 MB
Shared system memory 1722 MB
Display adapter driver version 8.771.1.0
Primary monitor resolution 1366x768
DirectX version DirectX 10

Network

Network Adapter Realtek PCIe FE Family Controller
Network Adapter Bluetooth Device (Personal Area Network)
Network Adapter Broadcom 4313 802.11b/g/n
 

Relevancy 111.37%

Hi

I have had my MSI GE60 for approx a year, I have had these problems from the start, but less frequently. The memory management BSOD occurs randomly, while the page fault in nonpaged area happens mainly after the laptop was in sleep, hibernation mode.
I have checked the drivers they all seem to be up too date.

Please help

Attachment 53354

A:BSOD memory management and page fault in nonpaged area

Your bluetooth is disabled. Is this deliberate? If so, why?

Please uninstall the Killer Network Manager - a known cause of BSOD's on MSI systems.
More here:





At times the Killer Network Manager may cause BSOD problems:





NOTE:Link thanks to blueelvis (15Oct2014): https://forum-en.msi.com/index.php?topic=178064.0 This is a method for removing all the network software and only installing the driver. Perfect for those issues that can't be resolved any other way!

NOTE: See this link first: BSOD while playing on msi gt70 dragon edition 2 (thanks to kaelaan) It appears that the Killer Service problem was solved with the latest release of the Qualcomm versions of the drivers (so try updating to a version dated from later in 2014).




The Qualcomm Atheros Killer Service/KillerNetManager is known to cause BSOD's. Please follow the workaround instructions here:





First, open the Run dialog (Win + R keys) and type in "services.msc" (without the quotes) and press Enter
Scroll down and locate the "Qualcomm Atheros Killer Service" and right click on it. Select "Stop"
Right click on it again and this time select "Properties"
In the dropdown box for "Startup type", select "Disabled", then click on the "OK" button at the bottom of the window

Next, open Task Manager (right click on TaskBar and select "Task Manager")
Click on the "More details" dropdown (if present)
Click on the "Startup" tab
Scroll down and locate the "KillerNetManager" entry, right click on it and select "Disable"
There may also be an Install Shield (with the Killer gaming K next to it), if so Right click on it and select "Disable"
Finally, restart the system in order for the changes to take affect.



At times the Killer Network Manager will continue to load. If so, it's usually listed in the MSINFO32...Software Environment...Startup Programs section. If it is, please try this:





It may be that the instructions aren't stopping everything.
In some cases, there's a program running out of the Program Files/Program Files (x86) directory.
"c:\program files\qualcomm atheros\killer network manager\killer~1.exe" (NOTE: killer~1.exe is most likely killernetmanager.exe)
In other cases, there's a program running out of c:\windows\installer\{Long string of letters, numbers, and dashes}\networkmanager.exe_130c27d738f34c89bddf21bcfd74b56d.exe (the long string of letters and numbers may change)

Here's some things to try
1) Please see if there are any entries in the Startup tab of Task Manager that are related to Qualcomm/Atheros/Killer Network Manager (and NOT the card itself) and disable them (please let us know what you find) Be careful as the wrong selection can disable the network card.
2) Check in "msconfig" for any entries that aren't in the Startup tab of Task Manager. Let us know if you find any Qualcomm/Atheros/Killer entries there (we'll disable them differently if they are there).
3) Locate the "c:\program files\qualcomm atheros\killer network manager\killer~1.exe" and rename the .exe to .BAD (the killer~1 is actually a filename that starts with killer and ends with .exe) There will be an error in event viewer, but it'll stop the bugger from loading.
4) Locate the "c:\windows\installer\{Long string of letters, numbers, and dashes}\networkmanager.exe_130c27d738f34c89bddf21bcfd74b56d.exe" entry and rename the last .exe to .BAD (the long string of letters and numbers may change)

Just FYI - here are the MSI workaround instructions: MSI USA - Online Technical Support FAQ















Out of 24 memory dumps there were 8 different BSOD error codes. The differing error codes are usually symptomatic of a lower level problem within the system. Th... Read more

http://www.eightforums.com/bsod-crashes-debugging/56584-bsod-memory-management-page-fault-nonpaged-area.html
Relevancy 110.51%

Hi Guys,
I started getting BSODs after installing MSI after burner, os i uninstalled it and ran cc cleaner still i am getting bsods, I installed windows 7 x64 2 days back.

I am using MSE antivirus. and in windows update I am not able to see SP1 update so didnot update yet.

System config in my system specs signature below .

Attaching the error log file.

Hope you guys help me resolve this issue

A:Windows 7 x64 BSOD memory management and page fault in non paged area

two of the dump files seem to be identical?

Anyway, all three dump files point to memory management as you stated in your subject.... did you run memtest86+ ? Have you replaced / checked any hw recently?
Could you try to remove 1 mem stick and see what happens (apart from slowing down )

http://www.sevenforums.com/bsod-help-support/171219-windows-7-x64-bsod-memory-management-page-fault-non-paged-area.html
Relevancy 110.51%

Hello guys. please help me with my BSOD problem. currently i can only see these two error messages (as per title) every time my laptop went bluescreen.

i have acer aspire 4741G with Win7 Home Premium x64 pre-installed

attached is minidump file

thankyou people!

A:BSOD error:memory management (i think) and page fault in nonpaged area

Welcome

Please upload your msinfo32.nfo file. To get this: Start Menu -> Type msinfo32 into the Search programs and files box -> When it opens, go to File, Save -> Save as msinfo32.nfo and save in a place you will remember -> Let it finish the process of gathering and saving the system info -> Right click the .nfo file, click send to compressed (zipped) folder -> Upload the .zip file here

Please upload your msinfo32.txt file. To get this: Start Menu -> Type msinfo32 into the Search programs and files box -> When it opens, go to File, Export -> Save as msinfo32.txt and save in a place you will remember -> Let it finish the process of gathering and saving the system info -> Right click the .txt file, click send to compressed (zipped) folder -> Upload the .zip file here

Take memtest. Run for 8 passes and test each stick in a know good slot for an additional 6 passes.
RAM - Test with Memtest86+





Quote:
The goal is to test all the RAM sticks and all the motherboard slots.

Check your motherboard manual to ensure the RAM sticks are in the recommended motherboard slots. Some motherboards have very specific slots required for the number of RAM sticks installed.

If you get errors, stop the test and continue with the next step.

1. Remove all but one stick of RAM from your computer (this will be RAM stick #1), and run Memtest86 again, for 7 passes. *Be sure to note the RAM stick, use a piece of tape with a number, and note the motherboard slot.
If this stick passes the test then go to step #3.

2. If RAM stick #1 has errors, repeat the test with RAM stick #2 in the same motherboard slot. *If RAM stick #2 passes, this indicates that RAM stick #1 may be bad. If you want to be absolutely sure, re-test RAM stick #1 in another known good slot.
*If RAM stick #2 has errors, this indicates another possible bad RAM stick, a possible motherboard slot failure or inadequate settings.
3. Test the next stick of RAM (stick #2) in the next motherboard slot. *If this RAM stick has errors repeat step #2 using a known good stick if possible, or another stick.
*If this RAM stick has no errors and both sticks failed in slot#1, test RAM stick #1 in this slot.
4. If you find a stick that passes the test, test it in all the other motherboard slots.

If Part 2 testing shows errors, and all tests in Part 3 show errors, you will need to test the RAM sticks in another computer and/or test other RAM in your computer to identify the problem.

In this way, you can identify whether it is a bad stick of RAM, a bad motherboard, or incompatibility between the sticks.


Errors are sometimes found after 8 passes.
Do this test overnight, before going to bed.

http://www.sevenforums.com/bsod-help-support/267002-bsod-error-memory-management-i-think-page-fault-nonpaged-area.html
Relevancy 110.51%

I have been getting random blue screens for about a month now so I decided I would finally make a forum post about it. A lot of my games on steam always has files missing after completely downloading the games. It seems like a lot of my errors when installing programs are missing files. So I decided it probably is the hard drive messing up so I went and bought a new hard drive but that did not fix the problem. I still have the same problem. I have no idea if it is a hardware issue or a software issue that is causing me to blue screen. I have done windows memory test and hard drive error checking. If you could help me I would greatly appreciate it.

A:Windows 7 Page fault in nonpaged area and memory management (bsod)

Welcome

Take memtest. Run for 8 passes and test each stick in a know good slot for an additional 6 passes.

RAM - Test with Memtest86+
Guide to using Memtest86+ - Geeks to Go Forums






Quote:
The goal is to test all the RAM sticks and all the motherboard slots.

Check your motherboard manual to ensure the RAM sticks are in the recommended motherboard slots. Some motherboards have very specific slots required for the number of RAM sticks installed.

If you get errors, stop the test and continue with the next step.

1. Remove all but one stick of RAM from your computer (this will be RAM stick #1), and run Memtest86 again, for 7 passes.
Be sure to note the RAM stick, use a piece of tape with a number, and note the motherboard slot.
If this stick passes the test then go to step #3.

2. If RAM stick #1 has errors, repeat the test with RAM stick #2 in the same motherboard slot.
If RAM stick #2 passes, this indicates that RAM stick #1 may be bad. If you want to be absolutely sure, re-test RAM stick #1 in another known good slot.
If RAM stick #2 has errors, this indicates another possible bad RAM stick, a possible motherboard slot failure or inadequate settings.
3. Test the next stick of RAM (stick #2) in the next motherboard slot.
If this RAM stick has errors repeat step #2 using a known good stick if possible, or another stick.
If this RAM stick has no errors and both sticks failed in slot#1, test RAM stick #1 in this slot.
4. If you find a stick that passes the test, test it in all the other motherboard slots.

If Part 2 testing shows errors, and all tests in Part 3 show errors, you will need to test the RAM sticks in another computer and/or test other RAM in your computer to identify the problem.

In this way, you can identify whether it is a bad stick of RAM, a bad motherboard, or incompatibility between the sticks.


Upload a screenshot of your hard disk using crystal disk info:CrystalDiskInfo - Software - Crystal Dew World
Screenshots and Files - Upload and Post in Seven Forums

Run Disk Check on your hard disk for file system errors and bad sectors on it:Disk Check

Hard drive test both short and long with: SeaTools for Windows

Also the DOS version of:SeaTools for DOS

Keep us posted

http://www.sevenforums.com/bsod-help-support/260039-windows-7-page-fault-nonpaged-area-memory-management-bsod.html
Relevancy 110.51%

Encountered these two bsods within 15mins of each other. Now am currently running memtest86+ with one stick. If i have no errors on either stick, does it still mean my ram is error free? Do i need a change? I've reformatted the PC just 2 months back because of these two same issues too.

A:BSOD: Page fault in non paged area and Memory Management error.

Hi,

Please reconfigure windows to collect the correct info
You want small memory dumps - "MiniDumps"

http://www.sevenforums.com/tutorials/174459-dump-files-configure-windows-create-bsod.html

And here are the instructions for posting:

http://www.sevenforums.com/crashes-d...tructions.html



   Tip
Ensure you click the "GRAB ALL" button and then wait for each window to appear in turn and then click OK

For your RAM, run memtest with all the modules in place to start, if errors occur
then follow section 3 in the tutorial.

Cheers

Dave

http://www.sevenforums.com/bsod-help-support/304358-bsod-page-fault-non-paged-area-memory-management-error.html
Relevancy 91.16%

Hi I have troubles with system stability crashes and glitches in software This computer is for my work visualisation rendering -Most full system crashes occur when listening music and high demand software rendering pre computation rendering saving files mb -I frequently use gb ram for rendering of gb -Occasionally before crashing the system will be stuck in a state music will continue playing for short while can still navigate between applications but cannot open anything new -Crysis will occasionally non fault BSOD, in area management, memory paged crash when I played it Glitches include -Rendering crash something like error in the pre computation files BSOD, memory management, fault in non paged area -Recently experienced windows explorer not refreshing files lists names -music pausing or stuttering during intensive application after closing the application the music will have large breaks between songs and when seeking becoming more frequent recently OS - Vista Windows Windows x -bit or x Bit What was original installed OS on system Windows Is the OS an OEM version came pre-installed on system or full retail version YOU purchased it from retailer Self installed OEM Age of system hardware Roughly months Age of OS installation - have you re-installed the OS Orignal installation CPU i k ghz runs reasonably cool ish under work ish under stress test Video Card HD shaders unlocked with switch MotherBoard Asrock Z extreme gen Power Supply - brand amp wattage Antec TruePower TP- W Ram Corsair CMX GX M A C GB x GB DDR Tests completed -Have run prime at least over hours- no problems -Have run memtest passes on all four sticks -Have run memtest on individual sticks in slot amp passes - no problems at least hours worth -Have run linx - no problems -Have run windows memory diagnostic - no problems -Have run windows check Disk - no problems ---I cannot reproduce any crash at my command--- HDD -System drive OCZ Agility GB SSD quot filling up very fast need to upgrade -Original Data Drive Samsung SpinPoint F TB HD SJ -New Data Drive Seagate Barracuda TB ST DM old drive changed to backup I would like to find the cause before some system files become corrupted or something I don't have trouble buying new ram if my sticks are bad but it could be software motherboard cpu -- don't sure I would love if you can help me find the cause and fix I would actually buy you a cake if I could somehow I have attached the files from the output Thanks

A:BSOD, memory management, fault in non paged area

Code:
22528 16/10/2009 5:56:42 PM "C:\Program Files (x86)\Common Files\Seagate\DiscWizard\bootwiz.sys"
22528 16/10/2009 5:56:42 PM "C:\Program Files (x86)\Common Files\Seagate\MediaBuilder\bootwiz.sys"
19008 14/07/2009 11:19:10 AM "C:\Windows\System32\drivers\wimmount.sys"
68096 14/07/2009 10:06:38 AM "C:\Windows\System32\DriverStore\FileRepository\1394.inf_amd64_neutral_0b11366838152a76\1394bus.sys"
19008 14/07/2009 11:19:10 AM "C:\Windows\System32\drivers\wimmount.sys"
68096 14/07/2009 10:06:38 AM "C:\Windows\System32\DriverStore\FileRepository\1394.inf_amd64_neutral_0b11366838152a76\1394bus.sys"
Not sure what those drivers are for but they def out of date
Start with updating your system drivers

Now the error you have mentioned about "memory_management_fault in non paged area" and your dump files are referring to memory corruption as well
I know you have tested your memory but what understood was that you ran the test on all the sticks at same time that actually does not work
so follow this
BSODs can be caused by the hardware issues as well. Most common is the memory corruption. It is very important to run memtest on single stick of RAM at a time in troubled computer. Running test on all RAM sticks at once does not give accurate results
1) Download memtest
Memtest86+ - Advanced Memory Diagnostic Tool (.iso file)
2) Burn that on a CD, as a bootable image
3) Turn your computer off
4) Remove all but one RAM stick from your computer
5) Boot your computer with memtest cd
6) Run 8 ? 11 passes on that stick
7) Shutdown the PC
8) Take the tested RAM stick out and plug in the next RAM stick
9) Boot again with memtest CD and run 8 ? 11 passes
Repeat the process until all RAM sticks are tested individually

http://www.techsupportforum.com/forums/f299/bsod-memory-management-fault-in-non-paged-area-641262.html
Relevancy 86.86%

I built this computer a few weeks again and have been getting a periodic (every 2-3 days) BSOD. I ran Memtest as was recommended to those with similar problems; it cycled through four times without detecting any errors. I need to figure out which piece of hardware (presumably) is the problem so I can get it back to newegg before the return window closes. Dump file attached per forum instructions. Thanks so much for your help, guys!

A:New Build, repeated "Page fault in nonpaged area" BSOD 0x00000050

Hi trippdup.

Install Service pack 1 and all other windows updates. Otherwise the system will remain vulnerable to crashes.

Code:
Windows 7 Kernel Version 7600 MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.17273.amd64fre.win7_gdr.130318-1532
Learn how to install Windows 7 Service Pack 1 (SP1)
Service Pack and Update Center - Microsoft Windows

Also, Avast is contributing to the BSODs.

Code:
fffff880`08262bb8 fffff880`0427044dUnable to load image \??\C:\Windows\system32\drivers\aswSnx.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for aswSnx.sys
*** ERROR: Module load completed but symbols could not be loaded for aswSnx.sys
aswSnx+0x3044d
Description here: Driver Reference Table - aswSnx.SYS

Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.

Download, install and update those, and then run full system scans with both of them, one by one; for a safety need, as the installed antivirus failed.

Let us know the results.

http://www.sevenforums.com/bsod-help-support/326518-new-build-repeated-page-fault-nonpaged-area-bsod-0x00000050.html
Relevancy 85.14%

Hello everyone,

I have recently just reinstalled windows 7 after having a virus on my previous installation, I had a few problems directly after installation as I couldn't install any programs due to installers crashing and the odd B.S.O.D. however a forum member told me to do SFc/SACNNOW and that fixed the problem of installing programs however I am still experiencing BSODs on a regular basis, this has happened alot and am starting to think that it is a hardware problem as when I had vista it did the same thing, and before on my previous windows 7 it also crashed alot, this time I would like to get to the route of the problem, I have attached the Z.I.P. file I do not know how to do the system health report though :s how is that done?

Windows 7 64 bit installed 1 day ago
originally windows vista
compaq cq61

A:BSOD memory management and page-non defaulted

Don't worry about the System Health Report right now. If needed we'll revisit it and provide more suggestions.

4 memory dump files with 3 different STOP errors and 2 different causes blamed. IMO this may be the start of a pattern that indicates a hardware problem. As such, let's start with these free diagnostics:





Quote:
H/W Diagnostics:
Please start by running these bootable hardware diagnostics:
Memory Diagnostics (read the details at the link)
HD Diagnostic (read the details at the link)

Also, please run one of these free, independent online malware scans to ensure that your current protection hasn't been compromised: Malware (read the details at the link)


If all the diagnostics pass, then please run Driver Verifier according to these instructions:





Quote:
Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

So, I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
NOTE: You can use Low Resource Simulation if you'd like. From my limited experimentation it makes the BSOD's come faster.
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

Reboot into Windows (after the crash) and turn off Driver Verifier by going back in and selecting "Delete existing settings" on the first page, then locate and zip up the memory dump file and upload it with your next post.

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.

If that doesn't work, post back and we'll have to see about fixing the registry entry off-line:

Code:
Delete these registry keys (works in XP, Vista, Win7):
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\VerifyDrivers
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\VerifyDriverLevel
More info on this at this link: Using Driver Verifier to identify issues with Windows drivers for advanced users


BSOD BUGCHECK SUMMARY
Code:

Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Thu Sep 9 08:59:11.536 2010 (UTC - 4:00)
System Uptime: 0 days 0:03:22.315
BugCheck 50, {fffff8a012705010, 0, fffff80002ba6f8c, 2}
Probably caused by : Pool_Corruption ( nt!ExDeferredFreePool+100 )
BUGCHECK_STR: 0x50
PROCESS_NAME: svchost.exe
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Deb... Read more

http://www.sevenforums.com/bsod-help-support/110104-bsod-memory-management-page-non-defaulted.html
Relevancy 84.28%

I've had several BSOD before and after a restart everything was ok but this time It gave me memory management error and then my windows don't come up, it just gives me a black page with no option and I just can turn it off by pressing power ,my pc is vio and it was windows 7,last year I upgraded it to windows 10 and I didn't install anything recently,I don't know why this happened

A:BSOD Memory Management and now I only have a blank page with no option

Please read the instructions here: Blue Screen of Death (BSOD) Posting Instructions

http://www.tenforums.com/bsod-crashes-debugging/56747-bsod-memory-management-now-i-only-have-blank-page-no-option.html
Relevancy 84.28%

Hi guys, I've been having some BSOD's since forever and I can't open this dmp files so I wonder if any of you might help me. Thanks in advance, I attached the required files.

A:BSOD everytime, page fault and memory management mostly.

New dump file from other BSOD
https://***************/files/1113606...20619-2223.dmp

http://www.sevenforums.com/bsod-help-support/235925-bsod-everytime-page-fault-memory-management-mostly.html
Relevancy 83.42%

It started a few fault, etc. IRQL Management, Page Memory equal, or BSOD not less - months ago a game that I play often Arma crashes a little while after I got an error saying that my system has recovered from a screen error or something like that I ignored it because it BSOD - IRQL not less or equal, Page fault, Memory Management, etc. was just once I had it more often later on started to look around on the internet for a fix couldn't find any so yet again ignored it and kept on playing Untill yesterday my game crashed again so i restarted the game while doing so I instantly got a BSOD Because I wasn't really impressed had more BSODs on older computers I used to have I rebooted my PC and started the game again leading into another BSOD rebooted now on startup I got another BSOD IRQL not less or equal So I booted into safe-mode looked around on this forum tried to fix it but made it worse while on safe-mode I had a BSOD while doing 'sfc scannow' Now everytime I try to start my PC normally or on safe-mode it just reboots on normal it reboots when shown 'windows is starting' on safe-mode while its loading sys files So I downloaded a windows iso from a Dell site which was redirected to on this forums I burned it onto a DVD on startup it asks if I want to boot from cd press any key I press a key and it goes to a next window showing EMS Windows install or something like that and Tools Windows memory Diagnostic so I choose Windows Install and it shows 'Windows is loading files' the bar goes to and is stuck So I have no way of using my PC atm Desperately waiting for help memtest which I done before resulted gt million errors while stuck on sfc scannow didnt do much since it gave me a BSOD on and the other time it was stuck at I don't have the money to buy new parts for this PC atm so I hope it's fixable specs Intel I GHz Nvidia Geforce GT GB GB RAM x TB HDD I cannot go in safe or normal mode to get any dumpfiles so uhhhm Best regards Martin

A:BSOD - IRQL not less or equal, Page fault, Memory Management, etc.

Welcome to SevenForums.

You ran memtest and it gave you errors so it seems that you found the problem already.

Test the RAM sticks each in different slots of the MB (I don't mean you have to take memtest again). See how the computer performs.

You may also see if changing the speed/clock of the ram helps or not.

http://www.sevenforums.com/bsod-help-support/263787-bsod-irql-not-less-equal-page-fault-memory-management-etc.html
Relevancy 83.42%

I built a computer last week and everything seemed to be going fine until earlier this week when I had a BSOD while surfing the internet and running Folding Home on my CPU and GPU I didn't BSOD Memory Page Fault Pool Bad Management, Header, think much of it until I got another BSOD the next day maybe while playing DiRT The first two BSOD's gave me the Memory Management error so I downloaded Memtest and ran passes with no errors I then got another BSOD while trying to play the Kerbal Space Program Demo and running F H on both the CPU and GPU This gave me the quot Bad Pool Header quot error I tried several things after this BSOD including flashing the motherboard BIOS to a newer version and uninstalling and reinstalling my video card drivers I also ran a GPU memory stress test and a minute Furmark stress test on the GPU thinking BSOD Memory Management, Bad Pool Header, Page Fault it might be my problem No issues I booted up the computer today thinking that my problems might be solved and left the computer running all day with F H on full on the CPU BSOD Memory Management, Bad Pool Header, Page Fault and GPU I started the KSP Demo again and got the Page Fault BSOD within about seconds of opening the game I'm at a loss as to what to do next Thanks for taking the time to read through my issues and a big thanks for any help you can give

A:BSOD Memory Management, Bad Pool Header, Page Fault

Hi waharvey.

Before doing anything else, uninstall AVG following http://www.avg.com/us-en/utilities. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.

Download, install and update those, and then run full system scans with both of them, one by one; as the installed antivirus is failing.

Let us know the results. Will decide about the further steps after seeing it.

Code:
BugCheck 19, {3, fffffa8006662d80, 0, 0}

*** WARNING: Unable to verify timestamp for avgmfx64.sys
*** ERROR: Module load completed but symbols could not be loaded for avgmfx64.sys
Probably caused by : Pool_Corruption ( nt!ExDeferredFreePool+a53 )

Followup: Pool_corruption
---------

http://www.sevenforums.com/bsod-help-support/323599-bsod-memory-management-bad-pool-header-page-fault.html
Relevancy 82.56%

I have a 2007 HP Pavilion that originally had Vista and I started getting BSOD and most were related to ntkrnlpa.exe. I erased the hard drive and updated to Windows 7 professional the other day but the blue screens continue.

I've uploaded the zip file generated from the SF diagnostic tool. HOpefully somebady can assist with the issues.

THanks,
Kevin

A:Frequent BSOD, Memory Management, Page Fault, Driver IRQL, etc..

Welcome to SevenForums

Test your hard drive: Hard Drive Diagnostic Procedure
Run Disk Check on your hard disk for file system errors and bad sectors on it: Disk Check
Test your ram sticks RAM - Test with Memtest86+

Keep us posted

http://www.sevenforums.com/bsod-help-support/263358-frequent-bsod-memory-management-page-fault-driver-irql-etc.html
Relevancy 82.56%

Hello I think I'm correct in saying that this is my first time posting to a forum with regards to my BSODs Amazingly I haven't had any until now So over the past month I've been getting some issues with various BSOD's popping up and I think it is either a motherboard or memory issue or both however I was looking to try and confirm my suspicions I bought a new PC about months ago i K Asus P Z -V Corsair GB x GB DDR Mhz Vengeance SSD etc and it seemed to run fine apart from the fact that when the PC boots up from cold it is unable to start the network card Code Cannot start device is shown in the device manager I ignored this as I generally tend to sleep the computer rather than shut it down I also thought it might be fixed in a later BIOS driver but it hasn't If you're wondering how I get on to the internet I have to uninstall the driver in the device manager and refresh the listings This seems to re install the driver and start the NIC - all fine On to the BSODs well these Page Fault. less equal, IRQL Memory not Mulitple or - Management, BSOD all seem to point to memory But I was hoping if I could get some Mulitple BSOD - Memory Management, IRQL not less or equal, Page Fault. assistance on proving that it is or is not the memory at fault I know I'm going to have to run a mem-test but I was hoping to get some tips before I do as I was planning on running mem-test on each stick for a good few hours So some help and points before I do this would be a real big help I've included the required zip file as highlighted in the guide BSOD - Posting Instructions as a side node this is a really awesome tool Obviously all help is appreciated and if any further information is required let me know P S The PC has not been overclocked and is running on BIOS default settings thanks Luke

A:Mulitple BSOD - Memory Management, IRQL not less or equal, Page Fault.

Your crash dumps are not showing any finite probable cause. In such a situation, it is better to enable Driver Verifier to monitor the drivers.

Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

Let us know the results, with the subsequent crash dumps, if any.

Also, test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight, per RAM module per slot.

http://www.sevenforums.com/bsod-help-support/264209-mulitple-bsod-memory-management-irql-not-less-equal-page-fault.html
Relevancy 77.4%

hello i have a pl that i made a few months ago and i get bsod more often then most ppl re boot there pcs Memory Management and Page Fault In Non Paged Area i have ran mem test on my ram and even went and switched them all out one by one i know a bit about pcs but im lost on how to fix it Diagnostic Report ----------------------------------------- Windows Validation Data-- gt Validation Code Cached Online Validation Code x Windows Product Key - -GJY -VJBQ -HYRR Windows Product Key Hash W nm F UPXrCkY xUhXb g Windows Product ID -OEM- - Windows Product ID Type Windows License Type OEM SLP Windows OS version ID Fault Page In Management and Area Windows Paged Non 7Memory A DB -CAF - DB-AC D-F EDA D Is Admin Yes TestCab x LegitcheckControl ActiveX N A hr x Signed By N A hr x Product Name Windows Ultimate Architecture x Build lab win sp rtm Windows 7Memory Management and Page Fault In Non Paged Area - TTS Error Validation Diagnostic Resolution Status N A Vista WgaER Data-- gt ThreatID s N A hr x Version N A hr Windows 7Memory Management and Page Fault In Non Paged Area x Windows XP Notifications Data-- gt Cached Result N A hr x File Exists No Version N A hr x WgaTray exe Signed By N A hr x WgaLogon dll Signed By N A hr x OGA Notifications Data-- gt Cached Result N A hr x Version N A hr x OGAExec exe Signed By N A hr x OGAAddin dll Signed By N A hr x OGA Data-- gt Office Status N A OGA Version N A x Signed By N A hr x Office Diagnostics D FF - - D FF - - D FF - - D FF - - D FF - - D FF - - D FF - - D FF - - Browser Data-- gt Proxy settings N A User Agent Mozilla compatible MSIE Win Default Browser C Users korff home AppData Local Google Chrome Application chrome exe Download signed ActiveX controls Prompt Download unsigned ActiveX controls Disabled Run ActiveX controls and plug-ins Allowed Initialize and script ActiveX controls not marked as safe Disabled Allow scripting of Internet Explorer Webbrowser control Disabled Active scripting Allowed Script ActiveX controls marked as safe for scripting Allowed File Scan Data-- gt Other data-- gt Office Details lt GenuineResults gt lt MachineData gt lt UGUID gt A DB -CAF - DB-AC D-F EDA D lt UGUID gt lt Version gt lt Version gt lt OS gt lt OS gt lt Architecture gt x lt Architecture gt lt PKey gt - - - -HYRR lt PKey gt lt PID gt -OEM- - lt PID gt lt PIDType gt lt PIDType gt lt SID gt S- - - - - - lt SID gt lt SYSTEM gt lt Manufacturer gt To Be Filled By O E M lt Manufacturer gt lt Model gt To Be Filled By O E M lt Model gt lt SYSTEM gt lt BIOS gt lt Manufacturer gt American Megatrends Inc lt Manufacturer gt lt Version gt P lt Version gt lt SMBIOSVersion major quot quot minor quot quot gt lt Date gt lt Date gt lt BIOS gt lt HWID gt E A FE lt HWID gt lt UserLCID gt lt UserLCID gt lt SystemLCID gt lt SystemLCID gt lt TimeZone gt Eastern Standard Time GMT- lt TimeZone gt lt iJoin gt lt iJoin gt lt SBID gt lt stat gt lt stat gt lt msppid gt lt msppid gt lt name gt lt name gt lt model gt lt model gt lt SBID gt lt OEM gt lt OEMID gt ACRSYS lt OEMID gt lt OEMTableID gt ACRPRDCT lt OEMTableID gt lt OEM gt lt GANotification gt lt MachineData gt lt Software gt lt Office gt lt Result gt lt Result gt lt Products gt lt Applications gt lt Office gt lt Software gt lt GenuineResults gt Spsys log Content x Licensing Data-- gt Software licensing service version Name Windows R Ultimate edition Description Windows Operating System - Windows R OEM SLP channel Activation ID cfd - a - af -af -ff d b b c Application ID c -d - d - e-d ec f f Extended PID - - - - - - - Installation ID Processor Certificate URL http go microsoft com fwlink LinkID Machine Certificate URL http go microsoft com fwlink LinkID Use License URL http go microsoft com fwlink LinkID Product Key Certificate URL http go microsoft com fwlink LinkID Partial Product Key HYRR License Status Licensed Remaining Windows rearm count Trusted time PM Windows Activation Technologies-- gt HrOffline x HrOnline x HealthStatus x Event Time Stamp ActiveX Registered... Read more

A:Windows 7Memory Management and Page Fault In Non Paged Area

these are whocrashed reports there are lots of them but there is only 2 deffrent ones witch are

On Mon 4/11/2011 7:05:23 PM GMT your computer crashed
crash dump file: C:\Windows\Minidump\041111-15796-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x80640)
Bugcheck code: 0x50 (0xFFFFFA808D50A16B, 0x0, 0xFFFFF800028B3FB5, 0x5)
Error: PAGE_FAULT_IN_NONPAGED_AREA
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft? Windows? Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that invalid system memory has been referenced.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver which cannot be identified at this time.
On Mon 4/11/2011 5:28:11 PM GMT your computer crashed
crash dump file: C:\Windows\Minidump\041111-20484-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x80640)
Bugcheck code: 0x1A (0x41790, 0xFFFFFA8000B1B820, 0xFFFF, 0x0)
Error: MEMORY_MANAGEMENT
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft? Windows? Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that a severe memory management error occurred.
This might be a case of memory corruption. More often memory corruption happens because of software errors in buggy drivers, not because of faulty RAM modules.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver which cannot be identified at this time.

http://www.sevenforums.com/bsod-help-support/156583-windows-7memory-management-page-fault-non-paged-area.html
Relevancy 75.25%

Please help I've posted about a month ago and noone replied to on Memory build nonpaged new pagefault computer more BSODS and management, area, in my thread Im getting constant BSODS these seems to be the most popular Memory management pagefault in nonpaged area and another one about watchdog violation i just got a quot Kernel security check failure quot also a couple of minutes Memory management, pagefault in nonpaged area, and more BSODS on new computer build ago I just uninstalled Avast Antivirus as i've read Norton might intefere with certain things so i didn't take any chance and deleted avast To make it short I recently assembled my computer here are the specs Had windows ultimate x Recently updated to windows pro x clean install not upgrade Purchased from microsoft online and had many MANY problems trying to install as i kept getting BSODS Finally ended up installing correctly after - tries always formatting before re-trying All hardware is new just assembled the computer in january MOBO Asus p z -V PRO CPU Intel i- k RAM x gb cl Gskill Ripjaw SSD Samsung gb OS Windows ultimate x HDD WD Caviar Black tb Heatsink Noctua NH-D PSU Antec HCP gold GPU MSI Radeon Twin FROZR I'm not sure if i need to adjust certain settings in BIOS for voltage of ram or whatever i'm not very informed on overclocking even though my goal was to do so I clearly cant think of overclocking right now since my system is FAR from being stable as is anyways please help me noone answered my last post and alot has changed since so i'm trying for a second time now

A:Memory management, pagefault in nonpaged area, and more BSODS on new computer build

Hello,

When uninstalling AVAST did you also run the uninstaller? avast! Uninstall Utility | Download aswClear for avast! Removal

I would suggest you start by testing the memory for errors follow the guideline in the link below.

Memory Diagnostics

http://www.techsupportforum.com/forums/f299/memory-management-pagefault-in-nonpaged-area-and-more-bsods-on-new-computer-build-686976.html
Relevancy 73.96%

Wonderin if someone could take a look at my recent bluescreens from 11/4 and 11/5. Have a feeling its the memory, but the video card is only a week old. 4gb of ram and windows uses 40-50% when idle. Ram too slow? Any help would be appreciated. Thank you.
-Edit- Reseated ram in other 2 dimms and booted correctly, however something is wrong. I seem to get this error a few times in an hour then disappears for a day, and returns. Sorry for being a newbie

A:Page found in non page area...memory?

  
Quote: Originally Posted by latexyankee


Wonderin if someone could take a look at my recent bluescreens from 11/4 and 11/5. Have a feeling its the memory, but the video card is only a week old. 4gb of ram and windows uses 40-50% when idle. Ram too slow? Any help would be appreciated. Thank you.
-Edit- Reseated ram in other 2 dimms and booted correctly, however something is wrong. I seem to get this error a few times in an hour then disappears for a day, and returns. Sorry for being a newbie



Memory and some seriously old drivers

Old drivers

Code:
RTCore64.sys fffff880`08d76000 0x00006000 5/25/2005 02:39:12 0x42941d90 fffff880`08d70000
AsIO.sys fffff880`03ffa000 0x00007000 12/17/2007 05:11:49 0x47663d55 fffff880`03ff3000
RimSerial_AMD64.sys fffff880`0531bc00 0x00007c00 11/24/2008 13:01:01 0x492addcd fffff880`05314000
aswRdr.SYS fffff880`02d46000 0x00009000 11/26/2008 13:16:31 0x492d846f fffff880`02d3d000
aswTdi.SYS fffff880`02cb3000 0x00011000 11/26/2008 13:16:40 0x492d8478 fffff880`02ca2000
aswMonFlt.sys fffff880`03a4d000 0x0001a000 11/26/2008 13:17:21 0x492d84a1 fffff880`03a33000
aswFsBlk.sys fffff880`03a56000 0x00009000 11/26/2008 13:17:29 0x492d84a9 fffff880`03a4d000
aswSP.SYS fffff880`03ff3000 0x0001c000 11/26/2008 13:17:47 0x492d84bb fffff880`03fd7000
vsmraid.sys fffff880`0102c000 0x0002a000 1/30/2009 21:18:57 0x4983a701 fffff880`01002000
ISODrv64.sys fffff880`03fb7000 0x0001e000 2/10/2009 05:22:18 0x4991474a fffff880`03f99000
mv61xx.sys fffff880`010d4000 0x00046000 3/19/2009 23:48:21 0x49c31205 fffff880`0108e000
vpcnfltr.sys fffff880`02dcf000 0x00015000 4/15/2009 01:49:17 0x49e5755d fffff880`02dba000
vpchbus.sys fffff880`053c3000 0x0003c000 4/15/2009 01:49:20 0x49e57560 fffff880`05387000
vpcusb.sys fffff880`05376000 0x0001d000 4/15/2009 01:49:20 0x49e57560 fffff880`05359000
vpcvmm.sys fffff880`03f02f00 0x00056f00 4/15/2009 01:49:22 0x49e57562 fffff880`03eac000
AtiPcie.sys fffff880`01408000 0x00008000 5/5/2009 11:00:22 0x4a005486 fffff880`01400000
spldr.sys fffff880`017ec000 0x00008000 5/11/2009 12:56:27 0x4a0858bb fffff880`017e4000
spsys.sys fffff880`08d09000 0x00071000 5/11/2009 13:20:58 0x4a085e7a fffff880`08c98000
ASACPI.sys fffff880`04397000 0x00008000 5/13/2009 21:25:17 0x4a0b72fd fffff880`0438f000
amdxata.sys fffff880`0110e000 0x0000b000 5/19/2009 13:56:59 0x4a12f2eb fffff880`01103000
nvraid.sys fffff880`00eb6000 0x00029000 5/20/2009 02:39:40 0x4a13a5ac fffff880`00e8d000
Rt64win7.sys fffff880`04200000 0x00039000 5/22/2009 10:52:30 0x4a16bc2e fffff880`041c7000
How To Find Drivers:




Quote:
- search Google for the name of the driver
- compare the Google results with what's installed on your system to figure out which device/program it belongs to
- visit the web site of the manufacturer of the hardware/program to get the latest drivers (DON'T use Windows Update or the Update driver function of Device Manager).
- if there are difficulties in locating them, post back with questions and someone will try and help you locate the appropriat... Read more

http://www.sevenforums.com/bsod-help-support/122910-page-found-non-page-area-memory.html
Relevancy 71.38%

Okay so when I play World of Warcraft for minutes- hours the game randomly shuts down I found out my problem was that my Video Card isnt up to date so I updated I updated and im still getting the same issue I looked at my EPU- Engine and when i click on VGA it says VGA [SOLVED] Area BSOD not Page Driver less or Page Non Equal IQRL Fault not detected Can someone please tell me what the possible problem can be and how I can fix this My graphics [SOLVED] BSOD Driver IQRL not less or Equal Page Fault Non Page Area card is a ATI Radeon HD mb I cant attach mini-dumps because for some odd reason it I apparently dont have permission so if anyone know how to bypass through this please let me know System specs Motherboard ASUS M A -M Processor AMD Phenom II X GHz RAM GBDDR VGA ATI RADEON HD mb Oh and by the way it sometimes goes blackscreen with these lines coming down while the game plays in the background and I have to manually turn off my computer Sometimes it gives me BSODs with PAGE FAULT NON PAGE AREA or IRQL NOT LESS OR EQUAL

A:[SOLVED] BSOD Driver IQRL not less or Equal Page Fault Non Page Area

Smells like video card puttering out.

Are you referring to a permission denial by attempting to attach the dumps directly? You'll need to zip them first before sending them over, as only certain file types are permitted. Plus there's a 5 MB limit (doubt that's the cause though).

http://www.techsupportforum.com/forums/f299/solved-bsod-driver-iqrl-not-less-or-equal-page-fault-non-page-area-565765.html
Relevancy 71.38%

Guys I been facing some issues with my relatively new CPU I have an Intel i cpu combined with GB DDR memory Mobo is DH BL - revision No GPU installed Power supply is via Corsair VX Problem i been facing BSOD saying BSOD(Page page interrupt hangs area/Clock not + recd) Non Facing fault that A clock interrupt wasnt recd Screenshot - http i tinypic com lbhc jpg BSOD Facing BSOD(Page fault Non page area/Clock interrupt not recd) + hangs saying Page fault in non paging area Couldnt grab a screenshot for this Display randomly goes off for a split second and reappears but the color of the panes go blue i havent chosen blue My setting is Facing BSOD(Page fault Non page area/Clock interrupt not recd) + hangs for clear pane Screenshot - http i tinypic Facing BSOD(Page fault Non page area/Clock interrupt not recd) + hangs com o vfs png This error solves itself after random number of hours mins Display vanishes for a split second and reappears and a small balloon at the bottom right corner prompts that the display driver had stopped working System plain hangs stops responding Randomly happens but more so while on youtube or after hrs of it idling i come back to the comp and try to scroll the content onscreen Sometime it revives from the stuck state as if nothing happened sometimes i have to give it a cold boot While reading forums with blue bands the blue bands kinda form blurry bars which stretch till the end of the screen I tried to grab a screenshot but the screenshots were clean The bands moved as i dragged the image about Also my comp's display went off one day and within a second came back with a blue-ish hue It restored itself but again has gone back to blue-ish I never have overclocked my processor What can be the reason for this Pls help me out here Other relevant information Windows x No other OS resides installed on system Full Retail Version OS was installed in July The cpu mobo were purchased in July I had Dynet RAM x GB each now using Corsair x GB Purchased in Aug i think The issue of hanging etc was faced with the Dynet RAM as well RAM info http i tinypic com hrolw png http i tinypic com neuxzk png

A:Facing BSOD(Page fault Non page area/Clock interrupt not recd) + hangs

33 of 44 crashes were related (as you surmised ) to a Bugcheck of 101. The rest were various hardware complaints. Please read below for what to try.

STOP 0x101: CLOCK_WATCHDOG_TIMEOUT troubleshtg
You should also update to SP-1 when you resolve this issue.

http://www.sevenforums.com/bsod-help-support/223527-facing-bsod-page-fault-non-page-area-clock-interrupt-not-recd-hangs.html
Relevancy 70.95%

Here are my system specs:
AMD 2200+
WinXP Pro SP2
760MB Ram
nVIDIA GForce 4 video

My computer will randomly shut down with either the page fault in non page area or driver not less of equal errors.

I have uninstalled and reinstalled drivers for the video and usb.

I don't know what else to do.

Will

A:BSOD Page Fault in Non Page Area/ Driver not less or equal

Hi flannelman,

Please give us the exact error message.

Thanks,

Rigel

http://www.bleepingcomputer.com/forums/t/28411/bsod-page-fault-in-non-page-area-driver-not-less-or-equal/
Relevancy 70.52%

I got this error when I installed Advance System Care and when i scanned my USB with noob killer. Then the P.C restarted and it started to displays the page fault in non page area.

The problem is when i boot in window xp cd it display this BOD error and when i boot Safe mode and Start windows normally it only reboot the P.C. So there is no way i can access the control tab window xp

My current p.C until i bought a new one :
Intel Pentium III ~ 1000Mhz ~ 192mb RAM ~ 15 GB disk and 40 slave HD

I need your expert advice thanks!!!
 

Relevancy 70.52%

So just today, i turn on my computer, but i receive a BSOD, that says "Page fault in a Non page Area",
After some researching i clean my computer, and still receive the error.

I can safely boot into safe mode, and after booting into safe mode i can then boot into windows 7 (Windows 7 Ultimate 64 Bit) normally after restarting. But the computer just goes not responding, and i can't do anything.

I've run memtest but there's no problems.
I also have a minidump file.

Is there any solution to this?
 

A:Solved: BSOD Page Fault in Non Page Area

The minidump is showing klif.sys, Klif Mini-Filter fre_wnet_x86 from Kaspersky Lab, as the probable cause for your BSOD. Basically, it's a driver part of your Kaspersky software.

You may have installed a 32-bit version of Kaspersky on a 64-bit version of Windows 7.

Uninstall Kaspersky completely and try your computer again.
 

https://forums.techguy.org/threads/solved-bsod-page-fault-in-non-page-area.948839/
Relevancy 70.52%

I keep getting BSOD at random times. Sometimes it crashes while I am not even doing anything. I have tried to reinstall windows couple times with different versions of Windows 7 x64. I have attached the mini dump files. Please help. Thank you
 

A:I keep getting Page fault in non page area BSOD on Windows 7

Hello,

I suspect bad RAM. Try testing it, using this guide:sevenforums.com/tutorials/105647-ram-test-memtest86.html

Sorry about the non-parsed link, I had to edit it to avoid detection by the forum software, which apparently prohibits new members like myself from posting links.

Firefox.exe was running in 2 dumps, which makes me suspect a network issue. Remove Norton, as per these directions: jcgriff2.com/NRT_N360_Removal.html

Replace it with MSE: microsoft.com/security_essentials

Summary of the Dumps:
Code:

Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Thu Oct 28 21:38:56.276 2010 (UTC - 4:00)
System Uptime: 0 days 1:45:02.587
BugCheck 50, {fffffa81856a0358, 0, fffff80002a8fb9b, 5}
Probably caused by : memory_corruption ( nt!MiDeleteAddressesInWorkingSet+27f )
BUGCHECK_STR: 0x50
PROCESS_NAME: firefox.exe
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Mon Oct 25 22:59:36.070 2010 (UTC - 4:00)
System Uptime: 0 days 0:01:01.382
BugCheck 1A, {5002, fffff70001080000, 2704, 2785fffffffe}
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+2971c )
BUGCHECK_STR: 0x1a_5002
PROCESS_NAME: sidebar.exe
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Mon Oct 25 22:57:40.689 2010 (UTC - 4:00)
System Uptime: 0 days 0:36:04.000
BugCheck 50, {fffff680400202d8, 0, fffff80002aec2e2, 5}
Probably caused by : memory_corruption ( nt!MiAgeWorkingSet+1c2 )
BUGCHECK_STR: 0x50
PROCESS_NAME: svchost.exe
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Sun Oct 17 13:09:16.691 2010 (UTC - 4:00)
System Uptime: 0 days 0:09:32.002
BugCheck 50, {fffff680400543b0, 0, fffff800028d12e2, 5}
Probably caused by : memory_corruption ( nt!MiAgeWorkingSet+1c2 )
BUGCHECK_STR: 0x50
PROCESS_NAME: firefox.exe
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии

 

http://www.techspot.com/community/topics/i-keep-getting-page-fault-in-non-page-area-bsod-on-windows-7.155688/
Relevancy 69.23%

Hey all A couple of weeks ago Management video card Memory Page and after Fault installation I upgraded video cards from a Galaxy GeForce that I had put in my custom built from a previous Dell to a EVGA NVIDIA GeForce GTX Everything worked fine at first but shortly after installing it i've started Page Fault and Memory Management after video card installation to get page fault in nonpaged area and memory management BSOD's and i'm not sure if that has anything to do with the new graphics card or if that is just a coincidence I tried switching out the RAM to different slots and even did a clean install with Windows but i'm still getting blue screened at random points sometimes i'll be able to get on and play World of Warcraft or whatever else for hours and be completely fine and other times it will blue screen after just minutes of surfing the web I've also tried reinstalling the video drivers and motherboard drivers I'm currently running Memtest on it and hopefully i'll see if it's a problem with the memory or not but any other advice would be appreciated and if someone could point me in the right direction on how to do so i can post the dump files if it blue screens again Thanks Hardware CPU AMD Phenom II Black Edition Motherboard ASUS M A TD EVO Video Card EVGA NVIDIA GeForce GTX PSU Thermaltake TR W RAM Sector GB DDR x GB Manufacturer is Patriot

A:Page Fault and Memory Management after video card installation

Test this video card with OCCT
http://www.sevenforums.com/tutorials...test-occt.html
Did you update to the latest drivers from Nvidia?
NVIDIA DRIVERS 275.33 WHQL

http://www.sevenforums.com/bsod-help-support/177790-page-fault-memory-management-after-video-card-installation.html
Relevancy 69.23%

So for a long time now probably going on over a year I've been wrestling with my computer I should get a new one and just start from zero but I can't afford that right now so I'm hoping that I may be able to get some help here Essentially my computer crashes a lot sometimes randomly and sometimes with noticeable patterns It's sometimes a BSOD usually Memory Management sometimes Page Fault and I got a Driver IRQL a long time ago and sometimes it's just a flat hang with a stuttering sound repeating until I do Fault BSODs Multiple Page Memory and Management Crashes, and a hard reset Something I've noticed lately is it crashes more often when I have Multiple BSODs and Crashes, Memory Management and Page Fault flash player up for some reason or another but especially for streaming videos There's also been a couple of times where first firefox and or the flash plugin will crash then the PC will run for a bit but if I try to bring firefox back up it will hang or BSOD I've gotten crashes for other reasons though In addition sometimes when I start the PC up it won't post saying a BIOS checksum failed and that it can't detect a keyboard That's usually solved by restarting it once or twice more I've had other various errors in the past but that's the majority of it and what's been happening recently The following is the steps I've taken so far Run Memtest overnight and for hours at a time no errors Run various hard drive checking utilities no errors Run chkdsk on both hard drives I've gotten the occasional bad sector but hasn't changed crashes afterward Reinstalled Windows both repair and clean I've also done sfc scannow afterward and everything was fine Removed Daemontools Avast replaced with MSE and several other bad programs Run CCleaner and various registry fixing tools I've had registry errors but cleaning them hasn't helped Run Full virus and malware scans both originally with Avast then with MSE and also Malwarebytes no viruses Replaced the Motherboard Graphics Card and CPU at various points since the problems first started not always as an attempt to specifically fix it but worth mentioning Updated the BIOS on the replaced motherboard and replaced its battery Reinstalled Flash and kept it updated just in case No luck Similarly I've kept all my drivers up to date and use Windows Update regularly I'm at my wit's end trying to find a way to make my PC stable Any help or insight would be appreciated Logs attached per the forum instruction but that only has the last one due to the aforementioned reinstall and cleans If I get a new BSOD I'll update it

A:Multiple BSODs and Crashes, Memory Management and Page Fault

just analysed the .dmp files and what really concerned me was this bit at the endof the dump file:

IMAGE_NAME: memory_corruption

this and a few other things in there indicated possible corruppted memory, if this is the case I would reccomend backing up all files IMMEDIATELY and then, just to confirm what is happening, run memtest and get back to me with results

Memtest86+ - Advanced Memory Diagnostic Tool

http://www.sevenforums.com/bsod-help-support/368916-multiple-bsods-crashes-memory-management-page-fault.html
Relevancy 69.23%

I've been getting a BSOD for quite some time. (about 3 or 4 months)
At first they would usually pop up when I've had the computer for most of the day, but recently they've just come as they please.
I've done a Memory Diagnostics and it showed no problems.
I've included from what I've read I believe to be a minidump of the BSOD.
I've decided to send multiple errors I found in my system event log just to be on the safe side since I don't know which errors I'm looking for.
If you could find anything that could explain what is causing this, please let me know.

Thank you.

A:Page fault in non page area BSOD

I've also read the sticky in the BSOD topic and completed steps 1-4.
I've included that as well.
Unfortunately, I do not know all the parts in my computer since I was not the one that bought them or put the computer together.

http://www.techsupportforum.com/forums/f299/page-fault-in-non-page-area-bsod-552713.html
Relevancy 69.23%

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Ultimate, Service Pack 1, 32 bit
Processor: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+, x64 Family 15 Model 67 Stepping 3
Processor Count: 2
RAM: 3071 Mb
Graphics Card: NVIDIA GeForce 9800 GTX/9800 GTX+, 512 Mb
Hard Drives: C: Total - 476929 MB, Free - 61344 MB;
Motherboard: Gigabyte Technology Co., Ltd., M61PME-S2P
Antivirus: avast! Antivirus, Updated and Enabled
Cpu usage sits at high 80's low 90's when app's are running
iexplorer.exe running at 22,000 when explorer is closed

Hi, still new to finding my way round a PC, so be gentle
 

A:BsoD Page Fault in Non Page Area

Please follow this small guide to attach your minidump files so they can be analysed.
First locate your minidump files, open Windows Explorer and click on the C: drive in the left pane, in the right pane look down the list of folders and double click on Windows to view its contents. NOTE: If your operating system is installed under a different drive letter then look there. Scroll down the contents of the Windows folder and look for a folder called minidump and double click on it. You should now see the minidump files which will have a .dmp extension.

Zip up at least 6 of the most recent files into one zip folder (if there are less then just zip up what you have).
NOTE: To zip up the files in Windows (all versions). Right click the file, click on Send To, and then click
Compressed (zipped) Folder. That will create a zip folder containing a copy of the file, you should see it appear.

If there is more than one .dmp file click on the first one, hold down the shift key and then click on the last one. That should highlight all the files. Then right click in the highlighted area, click on Send To, and then click Compressed (zipped) Folder.

Below the Message Box click on Go Advanced. Then scroll down until you see a button, Manage Attachments. Click on that and a new window opens.
Click on the Browse button, find the zip folder you made earlier and click on it so it becomes highlighted and click on Open.
Now click on the Upload button. Wait for the Upload to complete, it will appear just below the Browse box.
When done, click on the Close this window button at the top of the page.
Enter your message-text in the message box, then click on Submit Message/Reply.

 

https://forums.techguy.org/threads/bsod-page-fault-in-non-page-area.1100306/
Relevancy 69.23%

Hello I'm Wayne

Windows version : Windows 7 Ultimate
PC Specs : Intel(R) Core(TM) i5-3340 CPU @3.10GHz 3.30GHz
RAM : 8.00GB
64 bit
Manufacturer : Gigabyte Technology
Graphics : Nvidia GeForce GT 630

I Got a BSoD with some of the following text " CDD.DLL PAGE FAULT IN NON PAGE AREA "
I ran the Chkdsk Tool on windows and scanned with AVG and got nothing.
I'm pretty sure it's a RAM related problem , but not too sure , so I downloaded the SF diagnosis tool to get info to upload , please evaluate the logs and see if you can see a problem , thanks.

A:Bsod , cdd.dll , page fault in non page area

Hello, WayneTrain welcome to the Forums. I will try to help you. First start off by uninstalling all of the Gigabyte utilities as they are known BSOD causers. Next, reinstall your graphics drivers using this method
NVIDIA Drivers - Avoid Problems

See if that makes any differences to your system. Your dump files showed


Code:
nvlddmkm
start end module name
fffff880`072ba000 fffff880`07da2000 nvlddmkm T (no symbols)
Loaded symbol image file: nvlddmkm.sys
Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
Image name: nvlddmkm.sys
Timestamp: Wed Jul 10 06:44:34 2013 (51DD4922)
CheckSum: 00ABC1B3
ImageSize: 00AE8000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
The drivers are pretty old and need updating.

http://www.sevenforums.com/bsod-help-support/357662-bsod-cdd-dll-page-fault-non-page-area.html
Relevancy 69.23%

I was on the internet playing a game and all of a sudden the screen froze and crashed to a BSOD. The error was BSOD Page Fault in Non Page Area, I'm confused at to why this happened and was wondering if anyone could help me.

 

https://forums.techguy.org/threads/bsod-page-fault-in-non-page-area.968725/
Relevancy 69.23%

Hi there, I've recently been getting some weird crashes when I play Age of Empires 3. I'm not sure about other games, as this is the only one I've played in quite awhile. Randomly, I will get a BSOD, sometimes not at all though. The last one I got said PAGE_FAULT_IN_NON_PAGED_AREA. I've attached 6 (2 zips) minidumps in hopes that somebody can help me out

EDIT: I've read the pinned thread on what to do before attaching minidumps and completed (as best i could) all of the steps, but still get a BSOD. I have 1GB of memory, but it's in 4 sticks of 256MB so I couldn't really switch to a new slot. I did, however, clean the contacts.
 

A:Page Fault In Non Page Area Bsod

Hello and welcome to Techspot.

Your minidumps are quite old, being from december of last year.

Please post 5 or 6 of your latest minidumps.

Also, please go HERE and follow the instructions.

Regards Howard :wave: :wave:
 

http://www.techspot.com/community/topics/page-fault-in-non-page-area-bsod.43993/
Relevancy 69.23%

Please help, my computer keeps restarting with the BSOD. The error it give is page_fault_in_nonpage_area. I have basic computer skills, so if you could please walk me through a fix on this I would really really appreciate it. I am running windows xp on a dell.

Thank you so much in advance!

A:BSOD Page fault in non page area

Boot off of the Windows Disc Or download the Recovery Console ISO. Burn it to CD with IMGBurn Boot off of the CD and get to the Recovery Console. Here type chkdsk /R and press enter. The Check Disk utility will try and fix any file errors.
You can also download the ISO image for Seatools, or WD DataLifeGuardin my signature and burn the image to a CD using IMGBurn also in my signature and boot off of the newly created CD and run the Quick and Advanced tests on the HDD to test the integrity of the drive.

http://www.techsupportforum.com/forums/f10/bsod-page-fault-in-non-page-area-655518.html
Relevancy 69.23%

hi,
i just installed win 7 and installed all my drivers successfully,after an hour i got a bsod stating -page fault in non page area.Its been two days since am gettin this. i can log in and use my pc for some minutes before the bsod shows up..o and my pc is only 2 months old.please help.

A:BSOD-page fault in non page area

Hello Trx8 and welcome to Sevenforums.

BSOD Analyse

I'm suspecting 3rd party drivers, let's enable Driver Verifier.






Quote:
Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

So, I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "IRP Logging", "Force Pending I/O Requests" and "Low Resource Simulation" and click "Next" ("Special Pool" may be able to be used depending on amount of RAM and errors being seen. In situations with small amounts of RAM, DO NOT select it),
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

Reboot into Windows (after the crash) and locate the memory dump file. If present, turn off Driver Verifier by going back in and selecting "Delete existing settings" on the first page. Then, zip up the memory dump file(s) and upload them with your next post. If no dump files were generated, post back for further suggestions.

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.

If that doesn't work, post back and we'll have to see about fixing the registry entry off-line:

Code:
Delete these registry keys to stop Driver Verifier from loading (works in XP, Vista, Win7):
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\VerifyDrivers
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\VerifyDriverLevel



3rd party drivers (be aware of them)


Code:
gdrv.sys Fri Mar 13 04:22:29 2009 (49B9D175)
amdxata.sys Tue May 19 19:56:59 2009 (4A12F2EB)
intelppm.sys Tue Jul 14 01:19:25 2009 (4A5BC0FD)
intelide.sys Tue Jul 14 01:19:48 2009 (4A5BC114)
gdmwmprt.sys Mon Aug 17 07:02:58 2009 (4A88E482)
gdmuwm.sys Fri Nov 13 05:17:30 2009 (4AFCDDDA)
AppleCharger.sys Mon Jan 10 10:57:29 2011 (4D2AD809)
L1C62x64.sys Tue Mar 22 06:32:33 2011 (4D883471)
RTKVHD64.sys Tue Jun 7 14:45:44 2011 (4DEE1D78)
idmwfp.sys Thu Jan 26 14:47:36 2012 (4F215978)
AtihdW76.sys Fri May 11 10:25:40 2012 (4FACCD04)
atikmpag.sys Tue Jun 26 17:22:10 2012 (4FE9D3A2)
atikmdag.sys Tue Jun 26 18:04:19 2012 (4FE9DD83)
gdrv.sys
amdxata.sys
intelppm.sys
intelide.sys
gdmwmprt.sys
gdmuwm.sys
AppleCharger.sys
L1C62x64.sys
RTKVHD64.sys
idmwfp.sys
AtihdW76.sys
atikmpag.sys
atikmdag.sys

Best Regards,
Frederik.

http://www.sevenforums.com/bsod-help-support/243181-bsod-page-fault-non-page-area.html
Relevancy 69.23%

This might be a little longish and for that I apologize This morning I turned on my Windows Ultimate Dell XPS and it ran for a few minutes and in fault BSOD area non-page Page threw the BSOD error code described in the title Let the system reboot it ran for a few minutes and did the same thing OK Now we have a pattern I'm not sure what it means but there is a pattern I tried to restore to a previous date June th and today is the th and everything seemed to be BSOD Page fault in non-page area going ok until it was complete Now the system is restarted but I'm getting no video except for the cursor I have video during POST but nothing except the cursor after Windows starts Same thing happens during start up or start up in safe mode Obviously I can't see anything on the screen so I can't troubleshoot very extensively but if anyone has any suggestions I would greatly appreciate your help

A:BSOD Page fault in non-page area

Since Vista and 7 are very similar, and I just had the "black screen with cursor only" issue myself, this may help you, but I think it may be graphics driver related. I went to update my Nvidia graphics drivers, and it must not have worked properly, because all i got upon boot was a black screen with a cursor. i would get the windows boot logo and animation, and then it would go to a black screen.
I did not get the BSOD, because I have the pagefile turned off(I have 8GB of system RAM).

For my solution, you will need 2 things: current Nvidia drivers, and a program called driver sweeper.

First, boot in safe mode, and go into your control panel, and "uninstall" the nvidia graphics drivers. it sounds stupid, but this is the only effective way to uninstall the graphics drivers because of the software nvidia bundles with them. Next, run driver sweeper, and get rid of all remnants of the graphics card drivers. Then, reboot. First, go into a regular boot to see if you get video on the generic drivers from windows. If you do, your cards are good, reboot again, and go into safemode once again. If you dont get video upon normal reboot with generic drivers, see the * after this. Once back in safe mode, run the nvidia installer package, as administrator. It will install, and will prompt you to reboot. Reboot into a normal boot cycle and you should be fine, and have video again.

* if you boot into a normal boot, and you have followed the steps to remove your graphics drivers, you will be using windows generic ones. If you dont have video here, your graphics card may be faulty, or your hardware may be faulty, and you should contact your computer manufacturer for tech support or for an RMA.

http://www.sevenforums.com/bsod-help-support/171948-bsod-page-fault-non-page-area.html
Relevancy 69.23%

I have an ASUS Win 7 laptop. It keeps giving me a BSOD at any time. I have uploaded a zip file with hopefully helpful info.

A:Win 7 BSOD page fault in non page area

Welcome .

One bugcheck is not enough to establish a pattern, if you have some more please upload those as well.

We can see that by looking at the stack that something called win32k in order refresh a window
(redraw) but it hung for some reason and that Kaspersky (klif.sys) could have been involved
in some way or another not much info here.


Code:
Unable to load image \SystemRoot\system32\DRIVERS\klif.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for klif.sys
*** ERROR: Module load completed but symbols could not be loaded for klif.sys
0xfffff880050aafb0 : 0xfffff960000e0000 : "win32k!DereferenceW32Process <PERF> (win32k+0x0)"
0xfffff880050ab028 : 0xfffff960000ffc0d : win32k!RGNOBJ::bCopy+0x5d
0xfffff880050ab068 : 0xfffff960003c8500 : win32k!gpvwplHungRedraw
0xfffff880050ab088 : 0xfffff800030c5cee : nt!KiPageFault+0x16e
0xfffff880050ab090 : 0x0000000000000008 : Trap @ fffff880050ab090
0xfffff880050ab0f8 : 0xfffff960001ad1fb : win32k!xxxSendMessageToClient+0x1f7
0xfffff880050ab168 : 0xfffff960001acaa7 : win32k!xxxSendMessageTimeout+0x2b6
0xfffff880050ab1a8 : 0xfffff960001687b5 : win32k!DEVLOCKOBJ::bLock+0x411
0xfffff880050ab1b8 : 0xfffff960001a7f5b : win32k!XDCOBJ::RestoreAttributes+0x3b
0xfffff880050ab248 : 0xfffff960001ae249 : win32k!ClearHungFlag+0x41
0xfffff880050ab278 : 0xfffff960001261f1 : win32k!xxxBeginPaint+0x2ad
0xfffff880050ab2d8 : 0xfffff960001bf2ec : win32k!NtUserBeginPaint+0x8c
0xfffff880050ab378 : 0xfffff960001c27bd : win32k!NtUserGetProp+0x6d
0xfffff880050ab3a8 : 0xfffff800030c6e53 : nt!KiSystemServiceCopyEnd+0x13
0xfffff880050ab3b0 : 0xfffffa80109d4b50 : Trap @ fffff880050ab3b0
0xfffff880050ab3c8 : 0xfffff80003394eb9 : nt!CmpDoOpen+0x319
I see that you have a mix of RAM modules:


Code:
[Memory Device (Type 17) - Length 28 - Handle 0040h]
Physical Memory Array Handle 003fh
Memory Error Info Handle [Not Provided]
Total Width 64 bits
Data Width 64 bits
Size 4096MB
Form Factor 0dh - SODIMM
Device Set [None]
Device Locator ChannelA-DIMM0
Bank Locator BANK 0
Memory Type 18h - Specification Reserved
Type Detail 0080h - Synchronous
Speed 1333MHz
Manufacturer Elpida
Serial Number
Asset Tag Number
Part Number EBJ41UF8BCS0-DJ-F
[Memory Device (Type 17) - Length 28 - Handle 0041h]
Physical Memory Array Handle 003fh
Memory Error Info Handle [Not Provided]
Total Width 64 bits
Data Width 64 bits
Size 4096MB
Form Factor 0dh - SODIMM
Device Set [None]
Device Locator ChannelB-DIMM0
Bank Locator BANK 2
Memory Type 18h - Specification Reserved
Type Detail 0080h - Synchronous
Speed 1333MHz
Manufacturer 859B
Serial Number
Asset Tag Number
Part Number CT51264BC160B.M16F
Did the issues start shortly after upgrading?

Please test the RAM for errors or else debugging a faulty / mismatched RAM is futile.
Testing the RAM:








  
Quote: Originally Posted by koolkat77


Test and Diagnose RAM Issues with Memtest86+:RAM - Test with Memtest86+


   Tip
Pay close attention to part 3 of the tutorial "If you have errors"
Test the RAM with Memtest86+ for at least 7-10 passes. It may take up to 22 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold.


... Read more

http://www.sevenforums.com/bsod-help-support/308724-win-7-bsod-page-fault-non-page-area.html
Relevancy 69.23%

I fault in area page non page BSOD have been having issues with the BSOD since I first turned on the Laptop It was a very good price so I kept it dispsite the BSOD problems I have checked the drivers and updated what was updateable I flashed the Bios as newer version was available BSOD message changed between the Fault in non page area one about NTSF and one with no reason Originally the BSOD would pop up unexpectedly I have to restored or repaired every time I start up the Laptop That has changed now it seems to only happen at system start ups I can restart the laptop repeatedly with no problems once it is stable As long as there is a very short off time quot restart quot If I turn it off for a few hours overnight or for days I have to start the repair restore procedure all over again Until it is stabilized I have tried making a restore check point before turning off and going directly to the restore on thr next start up This seems to be a temporary work around until I can find the cause and correct it Also running a registry checker and repairing it has stopped the need to do factory resets as BSOD page fault in non page area the system BSOD page fault in non page area becomes more and more unstable with each BSOD Note The clock does NOT lose time So that rules out the internal battery I keep it plugged into a power outlet all the times There are NO AC and Battery problems I hope you can find the reason for the crashes in the attached files I hope I have attached and collected the files correctly

A:BSOD page fault in non page area

Please visit the below link for resolution :-
TechyKorner: Windows 7 BSOD error 0x00000050

http://www.sevenforums.com/bsod-help-support/191085-bsod-page-fault-non-page-area.html
Relevancy 69.23%

- x64 Win 7 home premium
- the original installed OS on the system? yes
- OEM version
- What is the age of system (hardware)?- 2 months old
- What is the age of OS installation (have you re-installed the OS?) 2 months old and no.


- HP P6674Y Pavilion Quad Core Phenom II 2.8Ghz, 8GB DDR3, 1TB SATA3, Windows 7 Home I did instal a video card: PowerColor AX3450 512MD2-H Radeon HD 3450 512MB 64-bit DDR2 PCI Express 2.0 x16 HDCP Ready Video Card and bigger PS: Antec EarthWatts Green EA-380D Green 380W and 2GB additional: SAMSUNG 2GB 240-Pin DDR3 SDRAM DDR3 1333 Desktop Memory ram when I first got it. The bsod has just started the last 2 days.

A:Page fault in non page area bsod

Hello there. I think that here you need to run a Check Disk tool.
Disk Check

Forget.
Ken answered you.

http://www.sevenforums.com/bsod-help-support/160331-page-fault-non-page-area-bsod.html
Relevancy 69.23%

Hello I am getting sick of BSOD's I recently changed by video card because i was experiencing BSOD: page fault in area non Page the stripe BSOD: Page fault in non page area problem with my XFX hd Now i used rma to get a new videocard and i got a Sapphire Vapor-X HD I got it juli so ignore the events before that because that was probebly my old videocard Only now i am experiencing random BSOD's I BSOD: Page fault in non page area got one just now when i was only running a virus scan kaspersky was the only program running I also got one during gaming Alien Swarm but it doesnt even matter cause it does it with all games And i got one BSOD during downloading newsgroups with grabit I currently am remote desktoping to my home pc to make the zip file needed for this post so the test might say that the network is a bit overloaded since i am running the test remotely I just saw the test is done and it said some nic's are disabled and that tungle a vpn is disabled Just ignore those since i disabled them because i dont use them I also checked my primairy harddisk intel ssd gig with hdtune pro and it did not find any errors Further more i uses memtest for my memory a while ago and it also didnt report any issues All drivers are up to date and so is windows So ignore network related issue's since this is not the problem And ignore problems before juli since i got a new videocard And perfmon said i didnt have antivirus but i do since i use kaspersky Please check out the zip file to locate my problem I personally think it is a ram related issue since its a page fault but memtest did not find anything

A:BSOD: Page fault in non page area

What memtest did you run? Be sure to use Memtest86:






  
Quote: Originally Posted by JK


Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Boot from the CD, and leave it running for at least 5 or 6 passes.


I know 3rd party anti-virus programs are famous for causing BSODs in Windows 7 and Vista, and Kaspersky is certainly one of them. Please remove it with this tool: http://support.kaspersky.com/downloa...vremover10.zip

Replace it with the free Microsoft Security Essentials: http://www.microsoft.com/security_essentials

If that does not work, please enable driver verifier: Using Driver Verifier to identify issues with Drivers

...Summary of the Dumps:
Code:

Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Debug session time: Tue Jul 20 13:56:10.507 2010 (UTC - 4:00)
System Uptime: 0 days 1:49:51.600
BugCheck 50, {fffffa80029bc00b, 0, fffff800030a043b, 2}
Probably caused by : memory_corruption ( nt!MiAgeWorkingSet+41b )
BUGCHECK_STR: 0x50
PROCESS_NAME: System
??????????????????????????????????????????????????????????????????????????????????????
Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Debug session time: Mon Jul 19 15:17:30.014 2010 (UTC - 4:00)
System Uptime: 0 days 2:21:55.106
BugCheck 50, {fffff8a01548d0d8, 1, fffff880010f7920, 2}
Probably caused by : fileinfo.sys ( fileinfo!FIStreamLogForNL+7b )
BUGCHECK_STR: 0x50
PROCESS_NAME: svchost.exe
??????????????????????????????????????????????????????????????????????????????????????
Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Debug session time: Wed Jul 14 17:54:34.441 2010 (UTC - 4:00)
System Uptime: 0 days 5:41:56.050
BugCheck 50, {fffffa8044ac1440, 0, fffff88001089424, 5}
Probably caused by : fileinfo.sys ( fileinfo!FIStreamFillStreamInfo+14 )
BUGCHECK_STR: 0x50
PROCESS_NAME: svchost.exe
??????????????????????????????????????????????????????????????????????????????????????
Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Debug session time: Wed Jun 30 12:13:06.392 2010 (UTC - 4:00)
System Uptime: 0 days 0:11:18.485
BugCheck 50, {fffff8a010dcb410, 0, fffff8800515584f, 2}
Probably caused by : dxgmms1.sys ( dxgmms1!VIDMM_SEGMENT::FlushPendingCPUAccess+57 )
BUGCHECK_STR: 0x50
PROCESS_NAME: System
??????????????????????????????????????????????????????????????????????????????????????
Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Debug session time: Wed Jun 30 13:40:41.760 2010 (UTC - 4:00)
System Uptime: 0 days 0:10:43.853
BugCheck 50, {fffffb5862c589e4, 1, fffff80002e633b0, 7}
Probably caused by : memory_corruption ( nt!MiDeleteAllHashMappings+170 )
BUGCHECK_STR: 0x50
PROCESS_NAME: WmiPrvSE.exe
??????????????????????????????????????????????????????????????????????????????????????
Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Debug session time: Wed Jul 21 02:20:01.505 2010 (UTC - 4:00)
System Uptime: 0 days 0:29:52.598
BugCheck 24, {1904fb, fffff88003954578, fffff88003953de0, fffff8000308e9e9}
Probably caused by : Ntfs.sys ( Ntfs!NtfsDeleteScb+108 )
PROCESS_NAME: System
BUGCHECK_STR: 0x24
??????????????????????????????????????????????????????????????????????????????????????

http://www.sevenforums.com/bsod-help-support/98890-bsod-page-fault-non-page-area.html
Relevancy 69.23%

I ve lately been getting the BSOD after installing all the Sims expansion packs It s page BSOD fault in non - Page area really annoying me because i don t know what to do I m going to attach the mini dump files because i saw that on BSOD - Page fault in non page area a similar question My drivers are fully updated I ve gotten the following information BSOD - Page fault in non page area from opening files on dxdiag i don t think it s going to help but hopefully OS Name Microsoft Windows XP Home Edition Version Service Pack Build OS Manufacturer Microsoft Corporation System Name COMPUTER System Model MS- System Type X -based PC Processor x Family Model Stepping GenuineIntel Mhz BIOS Version Date Phoenix Technologies LTD PG SMBIOS Version Windows Directory C WINDOWS System Directory C WINDOWS system Hardware Abstraction Layer Version quot xpsp - quot Total Physical Memory MB Available Physical Memory GB Total Virtual Memory GB Available Virtual Memory GB Page File Space GB Page File C pagefile sys and this OS Version Microsoft Windows XP Home Edition Service Pack bit Processor Intel R Pentium R CPU GHz x Family Model Stepping Processor Count RAM Mb Graphics Card NVIDIA GeForce FX BSOD - Page fault in non page area Microsoft Corporation Mb Hard Drives C Total - MB Free - MB Motherboard MICRO-STAR INTERNATIONAL CO LTD MS- Antivirus None Please help if you need more info then tell me Thanks nbsp

A:BSOD - Page fault in non page area

Your BSOD errors are being caused by nv4_disp.dll, which is an Nvidia graphics card driver. The BSODs are occurring while TS3SP03.exe is running, and TS3SP03.exe is related to SIMS3.

If the BSOD only occurs when playing the SIMS3, it would be difficult to blame the graphics card drivers. On the other hand, updating or re-installing the Nvidia graphics drivers might help.
 

https://forums.techguy.org/threads/bsod-page-fault-in-non-page-area.997787/
Relevancy 68.8%

My computer has started playing up the last couple of days...

It keeps on bringing up a blue screen which says 'page fault in non-paged area"
"Beginning dump of physical memory"
"physical memory dump complete"
then i cant get the computer back on, and i have to switch it off.

Any ideas what causes this and how to fix it?

At one point i thought it was my usb mass storage device, but i removed that from the computer and unplugged it and its still happening...

When i turn my computer on it says "your hardware might not be working properly" but i dont know what hardware they are talking about...

My boyfriends been messing around on here downloading lost or something, could that be it??

Thanks, if anyone can help me. Im worried its going to go off halfway through my work and il lose it all.
 

Relevancy 68.37%

hi,

i was using my pc on my hd tv, which i disabled realtek audio drivers in device manager,then afterwards i swapped to my pc screen and the blue ****en screen of death popped up, i need help fixing this, i cant access safe mode same bsod pops up, tryed disabling audio in bios , same thing any ideas beside reinstall and repair with cd ?? just need to enable those drivers and see what happens,aswell i was changing my resolution alot tv gave me an out of range screen
 

A:BSod - an attempt read only memory

Unusual that it would blue screen on audio drivers.....it wasn't video drivers was it.

If you have a plug in video card try physically removing it and restart the PC.
 

https://forums.techguy.org/threads/bsod-an-attempt-read-only-memory.1046467/
Relevancy 67.94%

Hello Sorry if this is the wrong area but I ve been having a problem with my computer crashing About days ago BSOD/ decreased memory? Repeated I turned on my computer and the boot screen said something to the effect of Memory read write fail at IC read EF AF expected EF EF Memory read write fail at read expected EFEFEFEF Decreasing available memory Since then I ve had at least BSOD crashes page fault in a non-page area When I restart I keep getting quot Your comp has recovered from a serious issue would you like to inform Microsoft quot messages Tonight it wouldn t let me run IE or Chrome afterwards Yesterday I wasn t able to run Photoshop as Repeated BSOD/ decreased memory? I m frantically trying to edit save my photos to DVD just in case About Repeated BSOD/ decreased memory? mins ago I opened this page with my email on another tab and got a quot High usage quot warning from Norton Yeah Norton dares talk about high usage It said I was using MB of memory Also tonight Norton wasn t running I don t remember the message but it told me to run LiveUpdate it wouldn t work then open in Safe mode and do a virus scan mins into it the BSOD was PFN list corrupted I m typing fast and hoping the comp doesn t blue-screen again I thought I read between crashes that it could be a RAM issue The comp is probably yrs old Dell Pentium Ghz service pack Memory says MB of RAM but I have an empty memory box of MB on my desk assuming I had and just saved box for reference Sorry if I m missing any more info If you have any advice please let me know I m not sure if I need a new comp a new hard drive or just some new memory Thanks in advance nbsp

A:Repeated BSOD/ decreased memory?

Just to update since last night...

I've had a few more blue screen errors. At the moment, I'm using Chrome because every time I try to open IE, it pops up a message that it's encountered a problem and needs to close. (Of course, what is/ isn't working seems to change with every restart). The blue screen errors either didn't give me a reason, or most recently put up:

Stop at C000021a, Fatal system error. The windows subsystem system process terminated unexpectedly with a status of 0xC0000005, 0X73728316 0x00c961d8.

I'm still getting Norton warnings of High usage, such as *gasp* 74mb through various programs. Tonight I tried to open the cmd window for Dr. watson and check something in the registry editor, but either I or my computer couldn't find the proper files. If I didn't mention it last night, MY computer has 4 cards in it (2 x 1024, 2 x 256). So far, I've read that the problem is the cards, or recent programs added (I haven't), or a glitch, and the solution is to either just use the Start disk, or wipe/ reinstall Windows, or buy new memory, or go back to last known config, or buy a new hard drive.

Please, if you have some insight, pass it along. I don't know where to go next. Thanks for reading...
 

https://forums.techguy.org/threads/repeated-bsod-decreased-memory.1039587/
Relevancy 67.94%

OS - Windows x Windows was the original install on the system The OS is a retail version System is roughly - years old OS age is roughly the same The OS has not been reinstalled Desktop CPU Athlon II X Video Card PowerColor Radeon HD MotherBoard ASUS M A LE R RAM G SKILL Ripjaws X Series x GB PC Power Supply SPARKLE W Custom build Overclock according execute to BSOD memory Attempt noexecute to CPU-Z GHZ x mult w Bus speed MHz amp BSOD Attempt to execute noexecute memory HT Link MHz NB freq MHz RAM Dram freq MHz FSB DRAM T According to WhoCrashed BCC xFC xFFFFC E x E xFFFFD D x Error Attempted Execute of NoExecute memory tied to ntoskrnl exe Hello I recently upgraded my CPU from a sempron to an athlon II x and overclocked it as I did with my sempron I try to be as cautious as possible with these things so when I was finished I had found my system to be stable using memtest and prime Over the last month and a half since however I started to have this BSOD with only this error I have tried to figure it out from others problems and from the vast internet but I have no clue on how to fix it Thank you for your time jwcs

A:BSOD Attempt to execute noexecute memory

Code:
System Uptime: 12 days 20:32:37.760
This doesn't seem too bad. Especially if you say you're overclocking a newer CPU.


Code:
Max Speed 3200MHz
Current Speed 3200MHz
I'm not convinced that you are indeed overlocking your CPU though (according to the above). I'm new to bsod log analysis though so perhaps someone with more insight can provide an answer.

What you can try though is update the below third party drivers, prioritizing those with an older date. For example, lmimirr.sys and teamviewervpn.sys both have a driver from 2007. I'd prioritize updating these 2 drivers first and then working your way down the list.

Third party driver list - sorted by date of driver

Code:
**************************Sat Apr 11 15:44:43.568 2015 (UTC - 5:00)**************************
lmimirr.sys Tue Apr 10 17:32:45 2007 (461C108D)
teamviewervpn.sys Thu Dec 13 03:22:09 2007 (4760F9C1)
whfltr2k.sys Wed Sep 16 12:48:59 2009 (4AB1250B)
AtiPcie64.sys Wed Mar 10 08:33:45 2010 (4B97ADC9)
usbfilter.sys Mon Nov 29 03:50:21 2010 (4CF3775D)
NiViPxiK.sys Wed Jun 6 16:00:14 2012 (4FCFC4DE)
NiViPxiKl.sys Wed Jun 6 16:00:16 2012 (4FCFC4E0)
AtihdW86.sys Tue Jul 17 02:34:09 2012 (50051571)
nipxibrc.sys Wed Mar 6 11:13:14 2013 (5137792A)
Rt630x64.sys Fri May 10 04:59:08 2013 (518CC4EC)
AODDriver2.sys Wed Sep 11 22:36:40 2013 (523136C8)
nipxirmk.dll Thu Jan 9 15:11:18 2014 (52CF1076)
nipxirmkl.sys Thu Jan 9 15:11:19 2014 (52CF1077)
nipbcfk.sys Fri Feb 28 14:26:53 2014 (5310F10D)
niorbk.dll Wed Mar 12 23:28:49 2014 (53213401)
nimdbgk.dll Thu Mar 13 00:01:37 2014 (53213BB1)
nidimk.dll Thu Mar 13 00:26:47 2014 (53214197)
taphss6.sys Wed Mar 19 12:54:29 2014 (5329D9D5)
nistreamk.sys Wed Jun 4 09:57:15 2014 (538F33CB)
nistreamkl.sys Wed Jun 4 10:06:35 2014 (538F35FB)
nipalk.sys Thu Jun 5 10:24:58 2014 (53908BCA)
nipxibaf.sys Thu Jun 12 12:51:13 2014 (5399E891)
aswHwid.sys Thu Jun 26 06:31:26 2014 (53AC048E)
aswMonFlt.sys Thu Jun 26 06:32:51 2014 (53AC04E3)
aswRdr2.sys Thu Jun 26 06:33:28 2014 (53AC0508)
aswRvrt.sys Thu Jun 26 06:35:39 2014 (53AC058B)
aswVmm.sys Thu Jun 26 06:35:49 2014 (53AC0595)
aswStm.sys Thu Jun 26 06:47:09 2014 (53AC083D)
aswSP.sys Wed Jul 2 12:38:12 2014 (53B44384)
atikmpag.sys Fri Jul 4 20:26:52 2014 (53B7545C)
atikmdag.sys Fri Jul 4 20:39:13 2014 (53B75741)
CypressUsbConsoleWindowsDriver64.sys Tue Aug 12 09:08:46 2014 (53EA1FEE)
aswSnx.sys Fri Nov 21 08:15:50 2014 (546F4916)
http://www.carrona.org/drivers/driver.php?id=lmimirr.sys
http://www.carrona.org/drivers/driver.php?id=teamviewervpn.sys
http://www.carrona.org/drivers/driver.php?id=whfltr2k.sys
http://www.carrona.org/drivers/driver.php?id=AtiPcie64.sys
http://www.carrona.org/drivers/driver.php?id=usbfilter.sys
http://www.carrona.org/drivers/driver.php?id=NiViPxiK.sys
http://www.carrona.org/drivers/driver.php?id=NiViPxiKl.sys
http://www.carrona.org/drivers/driver.php?id=AtihdW86.sys
http://www.carrona.org/drivers/driver.php?id=nipxibrc.sys
http://www.carrona.org/drivers/driver.php?id=Rt630x64.sys
http://www.carrona.org/drivers/driver.php?id=A... Read more

http://www.techsupportforum.com/forums/f299/bsod-attempt-to-execute-noexecute-memory-982394.html
Relevancy 67.94%

I am going to post a new theme for this problem, because it doesn't appear in news (In BSoD Help and Support). It considers a old theme. So you can delete this.

A:BSOD! attempt to write to read-only memory

2 STOP 0xBE in MSINFO32 report - one blames OS Kernel, one blames video
Please update your webcam, and your modem as their drivers are from 2007 and 2008 respectively.

Since you've already tested the memory, I'd suggest running Driver Verifier according to these directions:





Quote:
Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

So, I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
NOTE: You can use Low Resource Simulation if you'd like. From my limited experimentation it makes the BSOD's come faster.
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

Reboot into Windows (after the crash) and turn off Driver Verifier by going back in and selecting "Delete existing settings" on the first page, then locate and zip up the memory dump file and upload it with your next post.

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.

If that doesn't work, post back and we'll have to see about fixing the registry entry off-line:

Code:
Delete these registry keys (works in XP, Vista, Win7):
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\VerifyDrivers
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\VerifyDriverLevel
More info on this at this link: Using Driver Verifier to identify issues with Windows drivers for advanced users


BSOD BUGCHECK SUMMARY

Code:

Built by: 7600.16617.x86fre.win7_gdr.100618-1621
Debug session time: Wed Nov 3 19:25:40.673 2010 (UTC - 4:00)
System Uptime: 0 days 9:01:15.515
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0xBE
PROCESS_NAME: mbamservice.ex
Bugcheck code 000000BE
Arguments 9694f008 89ba5101 b2e23adc 0000000a
??????????????????????????????????????????????????????????????????????????????????????``

http://www.sevenforums.com/bsod-help-support/122460-bsod-attempt-write-read-only-memory.html
Relevancy 67.08%

My laptop has been crashing for these two days now... Please ignore the minidump before December 2011 because it might be irrelevant?

By the way, I got BSOD "usually" when I play games and video calling through skype.

Hope someone can see what's the problem. Thanks!

EDIT: I tried to update my intel wifi driver but it just wont update to the newest version after installing it >.<

System Spec:
HP ENVY 14
Intel(R) Core(TM) i7-2630QM [email protected]
RAM: 8GB
Is Windows 7 . . . - x86 (32-bit) or x64 ? x64 - the original installed OS on the system? Yes - an OEM or full retail version? OEM - What is the age of system (hardware)? 4 months - What is the age of OS installation (have you re-installed the OS?) No

A:BSOD: An attempt was made to write to read-only memory

Taking a look... Will post back within 10-20 minutes with steps to take. Welcome to SevenForums.

http://www.sevenforums.com/bsod-help-support/205587-bsod-attempt-made-write-read-only-memory.html
Relevancy 66.22%

Hello there,
Here is my logs;
NELLOW-SWS-Mon_12_29_2014_170647_14.zip :: Free File Hosting - File Dropper: File Host for Mp3, Videos, Music, Documents.
The thing is whenever it goes sleep and I try to wake it up, blue s*** of death happens.
I even bought a new ram (a single 8gb ram) instead of my old 4*2gb rams.
is there any hope?

A:BSOD after wake up error attempt to write read only memory

Remove Gigabyte software. Enable Driver Verifier. :Using Driver Verifier to identify issues with Drivers - Windows 7 Help Forums
There are several problem devices listed Most of them USBs and apparently drivers for an LGE Android Phone are not installed.
Get all available updates for your PC and stop overclocking in case you are.

Code:
GVTDrv64.sys Tue Sep 5 09:10:02 2006 (44FD22CA)
Gigabyte Easy Tune 6 driver (known BSOD issues w/Win7)
http://www.carrona.org/drivers/driver.php?id=GVTDrv64.sys

gdrv.sys Fri Mar 13 04:22:29 2009 (49B9D175)
Gigabyte Easy Saver - mobo power utility driver
http://www.carrona.org/drivers/driver.php?id=gdrv.sys

usbfilter.sys Wed Aug 29 03:27:12 2012 (503D6FF0)
AMD USB Filter Driver (likely part of the chipset drivers)
http://www.carrona.org/drivers/driver.php?id=usbfilter.sys

lvbflt64.sys Tue Oct 23 04:10:38 2012 (5085FC9E)
Logitech Webcam Software driver
http://www.carrona.org/drivers/driver.php?id=lvbflt64.sys

lvrs64.sys Tue Oct 23 04:11:24 2012 (5085FCCC)
Logitech Camera driver
http://www.carrona.org/drivers/driver.php?id=lvrs64.sys

lvuvc64.sys Tue Oct 23 04:12:08 2012 (5085FCF8)
Logitech USB Video Class Driver (WebCam)
http://www.carrona.org/drivers/driver.php?id=lvuvc64.sys

AODDriver2.sys Wed Nov 21 08:44:04 2012 (50AC8644)
AMD Overdrive; also in EasyTune6 for Gigabyte motherboard [br] Known BSOD issues in Win7[br][br]Part of AMD Fuel[br][br]Location: C:\Program Files\ATI Technologies\ATI.ACE\Fuel\amd64\AODDriver2.sys
http://www.carrona.org/drivers/driver.php?id=AODDriver2.sys

Rt630x64.sys Fri Jun 21 11:29:10 2013 (51C41CE6)
Realtek PCI/PCIe Adapters
http://www.carrona.org/drivers/driver.php?id=Rt630x64.sys

ASUSU7.SYS Thu Aug 1 11:27:13 2013 (51FA29F1)

ASUSU7.SYS - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

dump_storahci.sys Thu Aug 22 13:40:39 2013 (5215F8B7)
driver created to provide disk access during crash dump file generation
http://www.carrona.org/drivers/driver.php?id=dump_storahci.sys

AppleCharger.sys Mon Oct 28 02:59:21 2013 (526DC4F9)
GIGABYTE On/Off Charge driver. See here for details - http://www.gigabyte.us/MicroSite/185/on-off-charge.htm [br] May cause BSOD on Win7/8 systems - uninstall to test (haven't seen recently (15Jan2013))
http://www.carrona.org/drivers/driver.php?id=AppleCharger.sys

nvhda64v.sys Thu Nov 28 14:38:09 2013 (52974741)
nVidia HDMI Audio Device (nForce chipset driver)
http://www.carrona.org/drivers/driver.php?id=nvhda64v.sys

RTKVHD64.sys Tue Dec 3 13:26:10 2013 (529DCDE2)
Realtek High Definition Audio Function Driver
http://www.carrona.org/drivers/driver.php?id=RTKVHD64.sys

ndisrd.sys Thu Mar 27 07:12:42 2014 (5333C15A)

ndisrd.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

nvlddmkm.sys Wed Jul 2 19:42:02 2014 (53B4446A)
nVidia Video drivers
http://www.carrona.org/drivers/driver.php?id=nvlddmkm.sys

Debug session time: Mon Dec 29 15:33:46.756 2014 (UTC + 1:00)
Loading Dump File [C:\Users\Mihael\SysnativeBSODApps\122914-8203-01.dmp]
Built by: 9600.17031.amd64fre.winblue_gdr.140221-1952
System Uptime: 0 days 4:12:01.564
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+2093a )
BugCheck BE, {ffffd001a54000ac, 8000000000900121, ffffd001a8d3c110, b}
BugCheck Info: ATTEMPTED_WRITE_TO_READONLY_MEMORY (be)
Bugcheck code 000000bE
Arguments:
Arg1: ffffd001a54000ac, Virtual address for the attempted write.
Arg2: 8000000000900121, PTE contents.
Arg3: ffffd001a8d3c110, (reserved)
Arg4: 000000000000000b, (reserved)
BUGCHECK_STR: 0xBE
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCKET_ID: 0xBE_nt!_??_::FNODOBFM::_string_
BiosVersion = FB
BiosReleaseDate = 01/23/2013
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName =... Read more

http://www.eightforums.com/bsod-crashes-debugging/59242-bsod-after-wake-up-error-attempt-write-read-only-memory.html
Relevancy 66.22%

My computer delivers a BSOD and reboots when I get to about 95% through a Windows backup. The error message points to VHDMP.SYS.
It's actually failed intermittently for some weeks and then backed-up okay but today some 10 attempts have all failed. I've tried checks to the limit of my technical capabilities (checked disk and memory).

A:BSOD Attempt to write to readonly memory (VHDMP.SYS) during Backup

Are you using Bullquard Online Backup the driver is from may 2014.
Update to the latest windows 10 compatible version.

http://www.tenforums.com/bsod-crashes-debugging/37809-bsod-attempt-write-readonly-memory-vhdmp-sys-during-backup.html
Relevancy 65.79%

My computer has recently started having this random BSOD after working normally for the last few years The first BSOD had happened on while playing the game Subnautica after this blue screen the computer rebooted only to get the same BSOD again I then did a system restore to a previous point and the blue screens stopped though they returned today again This time the BSOD happened randomly as soon as windows was started and loaded up the desktop What I have noticed is that prior to these BSOD there has been a quite high usage of RAM and wuauserv was also using lots of computer resources even when here were no programs or games running I'm not sure what caused these blue screens since there were no dmp files made during the previous BSOD only on the most recent one I BSOD Random occur that on to memory only read 0x000000be/attempt write also noticed that in the BSOD it said something like quot Attempted to write in read only memory quot Today after the computer rebooted from the BSOD I got this displayed quot Problem signature Problem Event Name BlueScreen OS Version Locale ID Random BSOD that occur 0x000000be/attempt to write on read only memory Additional information about the problem BCCode be BCP FFFFF C B BCP BD BCP FFFFF BF BA BCP B OS Version Service Pack Product quot and this in the event viewer quot Log Name System Source Microsoft-Windows-WER-SystemErrorReporting Date PM Event ID Task Category None Level Error Keywords Classic User N A Computer Alienwarex -PC Description The computer has rebooted from a bugcheck The bugcheck was x be xfffff c b x bd xfffff bf ba x b A dump was saved in C Windows MEMORY DMP Report Id - - Event Xml lt Event xmlns quot http schemas microsoft com win events event quot gt lt System gt lt Provider Name quot Microsoft-Windows-WER-SystemErrorReporting quot Guid quot ABCE E -DE - - - FA C quot EventSourceName quot BugCheck quot gt lt EventID Qualifiers quot quot gt lt EventID gt lt Version gt lt Version gt lt Level gt lt Level gt lt Task gt lt Task gt lt Opcode gt lt Opcode gt lt Keywords gt x lt Keywords gt lt TimeCreated lt System gt lt EventData gt lt Data Random BSOD that occur 0x000000be/attempt to write on read only memory Name quot param quot gt x be xfffff c b x bd xfffff bf ba x b lt Data gt lt Data Name quot param quot gt C Windows MEMORY DMP lt Data gt lt Data Name quot param quot gt - - lt Data gt lt EventData gt lt Event gt quot SystemTime quot - - T Z quot gt lt EventRecordID gt lt Random BSOD that occur 0x000000be/attempt to write on read only memory EventRecordID gt lt Correlation gt lt Execution ProcessID quot quot ThreadID quot quot gt lt Channel gt System lt Channel gt lt Computer gt Alienwarex -PC lt Computer gt lt Security gt

A:Random BSOD that occur 0x000000be/attempt to write on read only memory

Also after the BSOD that happened today, the computer wouldn't start up; It was just beeping continuously. I had to unplug it from the wall and replug it back for it to restart. Once again I did a system restore. Help would be appreciated for this BSOD.

http://www.sevenforums.com/bsod-help-support/381730-random-bsod-occur-0x000000be-attempt-write-read-only-memory.html
Relevancy 64.93%

Lately I've been having some trouble with computer I'm getting two BSOD's Stop x APC index mismatch This one has heapend two or three times so far and only when booting my computer when my system is loading windows Stop x Page fault in non pages area This one heapened this morning when I turned on my computer allso while loading windows Noteable things that I remeber I did recently - A month or two back I did a clean install of my videocard drivers uninstall - gt driversweeper - gt install - Update to the - BSOD fault non paged area Page in new catalyst APC index mismatch did allready heapen before that - Uninstall pctools firewall - gt install comodo firewall - Defrag my harddrive with Obit Smart defrag I'm runnings Windows Vista x on a y old system I Reinstalled windows once I think it was roughly a year ago I did some research and as with most BSOD's it said it is either a driver issue or hardware malfunction Since I dont really that much about the subject and have no clue on how to fix it I defer to people with more knowledge on BSOD - Page fault in non paged area the subject Hoping its not a harware issue Ben

A:BSOD - Page fault in non paged area

Welcome
You have given us only one dump, which is not usually enough to diagnose a BSOD. In your case, however, the cause was a common problem, your anti Virus.
Uninstall Avast. In lieu of Avast use Microsoft Security Essentials and for extra protection Malwarebytes. After the new AV if you still experience BSOD, post.
Be sure to go to the Avast website and use their uninstaller to be sure that all remnanats of Avast are removed.

http://www.vistax64.com/crashes-debugging/291424-bsod-page-fault-non-paged-area.html
Relevancy 64.93%

This is starting to happen more and more recently usually preceded by applications crashing (Google Chrome or Football Manager), but on occasion just out of nowhere.

I ordered this computer new about a month ago from Overclockers UK with Windows 7 Home Premium 64-bit preloaded, and have not had to do any system restores or re-installations.

Thanks for your help.

A:BSOD Page Fault in NonPaged Area

  
Quote: Originally Posted by SteveBenbow44


This is starting to happen more and more recently usually preceded by applications crashing (Google Chrome or Football Manager), but on occasion just out of nowhere.

I ordered this computer new about a month ago from Overclockers UK with Windows 7 Home Premium 64-bit preloaded, and have not had to do any system restores or re-installations.

Thanks for your help.


Memory corruption caused by an as yet un-named driver (probably your Sftredirlh.sys)
I would run memtest and driver verifier

Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86.com - Memory Diagnostic

Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.
Beyond that, please run Verifier with these settings:





Quote:
Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

So, I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
NOTE: You can use Low Resource Simulation if you'd like. From my limited experimentation it makes the BSOD's come faster.
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.


Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

Reboot into Windows (after the crash) and turn off Driver Verifier by going back in and selecting "Delete existing settings" on the first page, then locate and zip up the memory dump file and upload it with your next post.

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.

If that doesn't work, post back and we'll have to see about fixing the registry entry off-line:

Code:
Delete these registry keys (works in XP, Vista, Win7):
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\VerifyDrivers
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\VerifyDriverLevel
Using Driver Verifier to identify issues with Windows drivers for advanced users



Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\K\Desktop\Windows_NT6_BSOD_jcgriff2\050611-17191-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search ... Read more

http://www.sevenforums.com/bsod-help-support/161578-bsod-page-fault-nonpaged-area.html
Relevancy 64.93%

Hi

three months after i built my own device i started to get BSODs on two months basis

I did a lot of things to overcome this problem like restoring, formatting, updating drivers and bios

lately, i discovered that my ram settings were so wrong

in the attachment u will find both the old and the current one ( i changed them manually)

http://www.ocztechnology.com/ocz-ddr3-pc3-10666-gold-low-voltage-dual-channel.html

for one month i was free

then the problem reappear and this month was the worst (3 or 4 times)

also two new strange things like the screen goes black then reappear saying that the graphic card was shut down and recovered

sometimes i started to hear noisy voice on booting that disappear after a couple minutes

I started to think that the problem is a hardware one so what do u advice me?
 

A:BSOD (Page Fault in Non Paged Area)

I've seen this BSOD in conjunction with various issues. The most common being the RAM. After you get a BSOD, immediately run a memtest. You can download a memtest for free from memtest.org. If the test fails, shut down your machine and leave it off for a good 20 to 30 minutes to let everything cool to room temp. Boot the machine back up again straight to memtest. If it passes, then you might have a heat problem with your RAM.

For some reason the link you posted is just taking me to a blank OCZ page. It isn't showing me any parts. If you could provide a part number for your modules, and what motherboard you are installing these into, it might help with the troubleshooting.
 

https://forums.techguy.org/threads/bsod-page-fault-in-non-paged-area.1003177/
Relevancy 64.93%

guys, i need help with my acer laptop. This morning suddenly this BSOD pop up.
Can anyone please help me. Would appreciate if anyone can pm me so that they can explain to me step by step on what I need to do because I don't really know much about laptops, I just know how to play only >.<
 

A:Bsod page fault in nonpaged area

Hi shera and welcome. Help by PM is against forum rules for your protection and so others with similar problems can learn and find answers to their problems. We will try to be as clear as possible. Don't be afraid to ask any questions you don't understand.

Please download these diagnostic tests.

http://static.techguy.org/download/SysInfo.exe

Please Publish a Snapshot using Speccy - https://www.piriform.com/speccy, taking care to post the link of the snapshot in your next post. You can find this by clicking File, then Publish Snapshot.

Minitoolbox log
Download MiniToolBox and save the file to the Desktop.
Close the browser and run the tool, check the following options:
List last 10 Event Viewer log
List Installed Programs
List Devices (Only Problems)
List Users, Partitions and Memory size
List Restore Points

Click on Go.

Post the resulting log in your next reply.
 

https://forums.techguy.org/threads/bsod-page-fault-in-nonpaged-area.1145645/
Relevancy 64.93%

Second BSOD on almost 2 year old computer when I played a video on MLB

What was weird it said page fault in non paged area.



Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033

Additional information about the problem:
BCCode: 50
BCP1: FFFFFFFF8551E180
BCP2: 0000000000000000
BCP3: FFFFF880057C037B
BCP4: 0000000000000005
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\121111-17971-01.dmp
C:\Users\Rick\AppData\Local\Temp\WER-34133-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

A:Page default on non paged area BSOD

Here is the zip file

computer specs:

HP pavilion

windows 7 professional

bought in 2/14/2010

8 gigs of ram

1 Tb of space

http://www.sevenforums.com/bsod-help-support/202113-page-default-non-paged-area-bsod.html
Relevancy 64.93%

Hey all i just had a BSOD and are wondering why i got it.

it happened when trying to install league of legends

never had one before, 3 years running not one. never had one which is why im interrested in knowing why i did crash

ive attached the minedump i also have a memeory.dmp but its to big to be uploaded

Kind regards Mosser

A:BSOD - Page fault non paged area

Please read these instructions BSOD posting instructions

http://www.eightforums.com/bsod-crashes-debugging/67820-bsod-page-fault-non-paged-area.html
Relevancy 64.93%

My laptop has been crashing to a bsod with the message 'page fault in non paged area' for a while now. It seems to do it pretty much randomly. Sometimes it'll only run for a few minutes then crash, others it'll run for hours and have no problems (whether I'm playing games or not).

Dell Studio XPS 1645 laptop
Windows 7 professional x64
Intel Core i7 Q720 processor
AMD Radeon HD 6570M/5700 Series graphics card

File attached.
Any help is appreciated.

Thanks.

A:BSOD - page fault in non paged area

Please upload your msinfo32.nfo file. To get this:
Click on the Start
Type msinfo32 into the Search programs and files box
When it opens, go to File, Save
Save as msinfo32.nfo and save in a place you will remember
Let it finish the process of gathering and saving the system info
Right click the .nfo file, click send to compressed (zipped) folder
Upload the .zip file here.

http://www.sevenforums.com/bsod-help-support/259294-bsod-page-fault-non-paged-area.html
Relevancy 64.93%

Hi, a BSOD shows up frequently after anything from 5 mins - 1 hour of usage.
It says Page_Fault_in_nonpaged_area

STOP: 0x000008E (0x C0000005, 0 x 804FE25F, 0 x f742f39C, 0 x 0000000 )

Any idea what could be causing the problem?
Do i post the mini dump here?

A:Bsod - Page Fault In Nonpaged Area

I would suggest you download Memtest86 and see if it finds any problems.

http://www.bleepingcomputer.com/forums/t/92370/bsod-page-fault-in-nonpaged-area/
Relevancy 64.93%

Just now I got a BSOD saying PAGE_FAULT_IN_NONPAGED_AREA. It happened when I was restarting because of a Windows update.

This is what the dmp file said -

==================================================
Dump File : 123013-16364-01.dmp
Crash Time : 30/12/2013 16:15:13
Bug Check String : PAGE_FAULT_IN_NONPAGED_AREA
Bug Check Code : 0x00000050
Parameter 1 : ffffffff`ffffffd0
Parameter 2 : 00000000`00000001
Parameter 3 : fffff800`03883dac
Parameter 4 : 00000000`00000000
Caused By Driver : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+75bc0
File Description : NT Kernel & System
Product Name : Microsoft? Windows? Operating System
Company : Microsoft Corporation
File Version : 6.1.7601.18247 (win7sp1_gdr.130828-1532)
Processor : x64
Crash Address : ntoskrnl.exe+75bc0
Stack Address 1 :
Stack Address 2 :
Stack Address 3 :
Computer Name :
Full Path : C:\Windows\Minidump\123013-16364-01.dmp
Processors Count : 8
Major Version : 15
Minor Version : 7601
Dump File Size : 281,496
Dump File Time : 30/12/2013 16:16:05
==================================================

A:Page fault in non paged area BSOD?

Welcome to Seven Forums Zunedge.

This is caused by trying to write to memory instead of the page file on the drive. It is many times just a transient problem and doesn't come back, or that has been my experience.

To be on the safe side follow through with this:
RAM - Test with Memtest86+

http://www.sevenforums.com/bsod-help-support/316676-page-fault-non-paged-area-bsod.html
Relevancy 64.93%

Experienced a BSOD for the first time on my Lenovo Thinkpad T400 laptop yesterday.

The BSOD error that I got was this:
Page Fault in Non Paged Area 0x50 (0x.....)

I have a dual-boot Fedora 12(default) and Windows 7 Home edition 64 bit (OEM). The BSOD is happening whenever I try to boot into Windows. Pressing F8 post boot and trying different options does not seem to make a difference. I always encounter the BSOD and the laptop restarts. Is there any way I can get into the system and extract the dump files? Is there any way to install the BSOD Dump & System File collection app or Windbg?

I can access the Windows partition after booting into Fedora. Can I extract the dump files from there? If so, what could be the location of the dump?

Thanks in advance.

A:BSOD - Page Fault in Non Paged Area

http://www.sevenforums.com/crashes-d...tructions.html
It takes certain skills, knowledge and time to understand what to do with WinDBG.

http://www.sevenforums.com/bsod-help-support/149258-bsod-page-fault-non-paged-area.html
Relevancy 64.93%

the last couple BSOD said page fault in non BSOD area fault paged page in non pages area i got didn t have a driver listed but not long ago aswsp sys was slisted I have XP pro mb ram CPU I haven t added any new software or hardware to be getting these BSOD please help me I am a starving web designer graphic artist and can t afford to loose my PC my system restore stopped working too BSOD page fault in non paged area here is BSOD page fault in non paged area my HJT Log Logfile of Trend Micro HijackThis v Scan saved at PM on Platform Windows XP SP WinNT MSIE Internet Explorer v Boot mode Normal Running processes C WINDOWS System smss exe C WINDOWS system winlogon exe C WINDOWS system services exe C WINDOWS system lsass exe C WINDOWS system svchost exe C WINDOWS System svchost exe C WINDOWS system svchost exe C Program Files Lavasoft Ad-Aware aawservice exe C WINDOWS system devldr exe C Program Files Alwil Software Avast aswUpdSv exe C WINDOWS Explorer EXE C Program Files Alwil Software Avast ashServ exe C WINDOWS SOUNDMAN EXE C Program Files Adobe Photoshop Album Starter Edition Apps apdproxy exe C WINDOWS system VTTimer exe C Program Files iTunes iTunesHelper exe C Program Files Yahoo Search Protection SearchProtection exe C PROGRA ALWILS Avast ashDisp exe C Program Files Adobe Acrobat Acrobat Acrotray exe C Program Files Google GoogleToolbarNotifier GoogleToolbarNotifier exe C Program Files Registry Mechanic RegMech exe C WINDOWS system ctfmon exe C WINDOWS system spoolsv exe C Program Files Innovative Solutions DriverMax devices exe C Documents and Settings All Users WINDOWS Application Data U U Launcher LaunchU exe C Program Files Common Files Apple Mobile Device Support bin AppleMobileDeviceService exe C Program Files Bonjour mDNSResponder exe C WINDOWS system inetsrv inetinfo exe C Program Files Microsoft SQL Server MSSQL ACT Binn sqlservr exe c Program Files Common Files Protexis License Service PsiService exe C Program Files Photodex ProShowGold ScsiAccess exe C WINDOWS System svchost exe C Program Files Common Files Ulead Systems DVD ULCDRSvr exe C Program Files Yahoo SoftwareUpdate YahooAUService exe C Program Files Alwil Software Avast ashMaiSv exe C Program Files Alwil Software Avast ashWebSv exe C Program Files iPod bin iPodService exe C Program Files Internet Explorer iexplore exe C Program Files Internet Explorer iexplore exe C Program Files Trend Micro HijackThis HijackThis exe R - HKCU Software Microsoft Internet Explorer Main Search Bar http us rd yahoo com customize ie defaults sb msgr http www yahoo com ext search search html R - HKCU Software Microsoft Internet Explorer Main Search Page http us rd yahoo com customize ie defaults sp msgr http www yahoo com R - HKCU Software Microsoft Internet Explorer Main Start Page http www yahoo com R - HKLM Software Microsoft Internet Explorer Main Default Page URL http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Main Default Search URL http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Main Search Bar http us rd yahoo com customize ie defaults sb msgr http www yahoo com ext search search html R - HKLM Software Microsoft Internet Explorer Main Search Page http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Main Start Page http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Search SearchAssistant http www comcast net toolbar search R - HKCU Software Microsoft Internet Explorer SearchURL Default http us rd yahoo com customize ie defaults su msgr http www yahoo com R - HKCU Software Microsoft Internet Connection Wizard ShellNext http go microsoft com fwlink LinkId R - HKCU Software Microsoft Windows CurrentVersion Internet Settings ProxyOverride local R - URLSearchHook Yahoo Toolbar - EF BD -C FB- D - F- D F - C PROGRA Yahoo Companion Installs cpn yt dll O - BHO amp Yahoo Toolbar Helper - D -C F - EFB- B - ECA - C PROGRA Yahoo Companion Installs cpn yt ... Read more

https://forums.techguy.org/threads/bsod-page-fault-in-non-paged-area.865109/
Relevancy 64.93%

Experiencing Memory_Management errors. I check the minidump folder and no dumps are created. I do have the system error reporting set to do a small minidump 128 kb and the location is set to Windows\Minidump. I have gotten new memory installed but the first time I ran the Windows Experience system rater I got another Memory Management BSOD. I checked the Virtual Memory and changed it back to the system managed size and rebooted. Haven't seen a memory management BSOD since but still not sure what is going on. Can Virtual Memory settings cause a Memory Management BSOD? How can I get the minidump?

A:BSOD Page Fault in Non Paged Area

Hi -

Please see - http://www.techsupportforum.com/f217...ps-501746.html

However, it sounds like the new RAM is the problem.

If you added RAM, take the new RAM stick(s) out.

If you replaced all RAM (got rid of the old), see if system will boot and stabilize on 1 stick RAM.

Regards. . .

jcgriff2

`

http://www.techsupportforum.com/forums/f299/bsod-page-fault-in-non-paged-area-522882.html
Relevancy 64.93%

Several weeks ago my computer was working perfectly well I took a day vacation and my computer was off for all of those days When I came back and booted it up for the first time it immediately gave me a cpu overtemp warning and blue screened After that it has been blue screening once or twice every single day with the new error message quot Page fault in non-paged area quot It has never again given me a cpu overtemp warning just the page fault BSOD non-paged in Page area BSOD fault The blue Page fault in non-paged area BSOD screens seem to be completely unrelated to what I am doing at the time I have blue screened while playing various games watching netflix and also while I was doing absolutely nothing with just the desktop up I googled the issue and tried every fix I could find which was to first update every driver known to man kind which had no effect on the BSODs The second suggestion was that it may be an issue with my RAM I ran a memtest test for about hours which produced absolutely zero errors I also tried cleaning out my computer dusting it off etc to no avail I cannot find any other solutions anywhere

A:Page fault in non-paged area BSOD

Hi Leur and welcome to sevenforums, I hope you'll enjoy your stay here!

Could you please upload the minidump files located here:

c:\windows\minidumps

Here are some methods that have worked for some people!






Quote:
Method 1 ? Adjust Paging File

To start off, you can try a simple trick with the paging file that fixes the issue for some folks. If the issue is not hardware related, then this page file solution might just work.
First, open the Control Panel and click on System. You can also right-click on Computer or This PC and choose Properties.



Now click on the Advanced System Settings link on the left hand side.



Under Performance, click on the Settings button.



Click on the Advanced tab and then click on the Change button under the Virtual Memory heading.



Finally, we have reached where we need to be. Uncheck the Automatically manage paging file size for all drives box and then select No paging file.



Click OK several times to get out of all the dialog windows and then restart your computer. Once you are back in, follow the exact steps again shown above, but this time select System managed size and check the Automatically manage paging file size for all drives box.
Like I said earlier, this works for some people, but not others so your mileage will vary. If you?re still getting blue screens, keep reading.

Method 2- Check Disk

This error can also occur if your hard drive is either failing or has errors on the drive. One quick way to check the hard drive is to run the chkdsk command in Windows.
To do this, click on Start and type in cmd. Right-click on the top result and choose Run as Administrator.



At the prompt, type in the following command:
chkdsk /f If you get a message stating the drive is locked and if you would like to schedule a chkdsk on the next restart, type in Y for yes. Go ahead and restart your computer and allow chkdsk to run, which could take a long time on Windows 7 and earlier. The process is much faster on Windows 8 and Windows 10.



Method 3 ? Bad Driver

If you recently updated a driver for a piece of hardware on your computer, it could be a faulty driver causing the blue screen issue. Drivers are essential for Windows, but sometimes the latest drivers can cause more problems than they fix.
If you are using third-party to automatically update your PC drivers, it?s probably a good idea to configure the software so that you can review each driver that is going to be updated beforehand.
Anyway, you can try to fix this problem by clicking on Start and typing in Device Manager. Right-click on the device that you updated the driver for and select Roll Back Driver. You can also choose Properties and then go to the Driver tab and click the Roll Back Driver button.



If the button is disabled or you don?t see the option when you right-click on a device, that means the current driver is the only driver ever installed for that device.
One last thing you can try is to click the Uninstall button and restart your computer. Windows will automatically try to install the driver for the hardware when Windows reboots. If this didn?t work, try the next method.

Method 4 ? Last Known Config

In some cases, the issue is bigger than just a driver and will require using the Last Known Good Configuration feature in Windows.



This basically brings back an older version of the entire Windows registry that worked. In Windows 7 and earlier, you just have to press the F8 key in order to bring up the Advanced Options screen when booting up.
In Windows 8 and Windows 10, check out my post on how to load the System Recovery Options screen since the F8 key no longer works on those two operating systems.
In addition to trying Last Known, you should also try to do a System Restore if Last Known didn?t work. Check out my previous post on how to perform a system restore.

Method 5- Check RAM

As mentioned above, RAM is usually the main culprit whe... Read more

http://www.sevenforums.com/bsod-help-support/388167-page-fault-non-paged-area-bsod.html
Relevancy 64.93%

I got a BSOD shortly after booting up my pc today. "PAGE FAULT IN NONPAGED AREA". Ran the DM Log Collector. Zip is attached. Any help working out the problem will be greatly appreciated!

A:BSOD - Page Fault in Nonpaged Area

Go to Support | Dell US and search for any update for the Broadcom NetLink (TM) Gigabit Ethernet. If available, apply it.

Let us know the result.

Some other issues also may be there, so further troubleshooting might be needed.
_____________________________________

Code:
Image name: k57nd60a.sys
Timestamp: Fri Jul 26 13:31:03 2013 (51F22CBF)

http://www.sevenforums.com/bsod-help-support/363175-bsod-page-fault-nonpaged-area.html
Relevancy 64.93%

Hi guys
i bought a new configuration:

Gigabyte-770T-D3L motherboard with
AMD Phenom II X2 processor
4 gb DDR3 Ram
ATI Radeon HD 4800 graphics card

freshly installed Windows 7 x64 retailed
i updated my drivers motherboard and graphics card i do not use ESET antivirus (just the windows essentials as you recommended)

and sometimes i still got random BSOD page fault in nonpaged area

but i always got a BSOD when i want to install the NetBeans IDE

i attached my dump files

thanks in advance for you time
cdog

A:BSOD [page fault in nonpaged area]

  
Quote: Originally Posted by cdog


Hi guys
i bought a new configuration:

Gigabyte-770T-D3L motherboard with
AMD Phenom II X2 processor
4 gb DDR3 Ram
ATI Radeon HD 4800 graphics card

freshly installed Windows 7 x64 retailed
i updated my drivers motherboard and graphics card i do not use ESET antivirus (just the windows essentials as you recommended)

and sometimes i still got random BSOD page fault in nonpaged area

but i always got a BSOD when i want to install the NetBeans IDE

i attached my dump files

thanks in advance for you time
cdog



Hi Cdog
One thing I noticed is sptd.sys used in daemon tools/alcohol120. It frequently causes BSOD's

Please remove any CD virtualization programs such as Daemon Tools and Alcohol 120%. They use a driver, found in your dmp, sptd.sys, that is notorious for causing BSODs. Use this SPTD uninstaller when you're done: DuplexSecure - Downloads
[/quote]
You can use MagicDisc as an alternative.

Freeware MagicISO Virtual CD/DVD-ROM(MagicDisc) Overview

Let us know if the BSOD's continue.
Ken J

http://www.sevenforums.com/bsod-help-support/127214-bsod-page-fault-nonpaged-area.html
Relevancy 64.93%

Recently I've been getting an on and off occurrence of quot display driver has stopped responding and has recovered quot BSOD area - Page fault non paged in and BSOD's showing page fault in non paged area Under normal computer use such as word processing instand messaging browsing the web and photo editing etc apart from what I'm just about to explain is fine and the computer doesn't crash nor drivers un-respond However when I try and run minecraft in far render distance with mods Optifine a FPS booster and far render distance in any architecture x and x of Java taking up a bit more RAM and video processing power run a Minecraft server the majority of where my RAM is Page fault in non paged area - BSOD going have Firefox open with a Page fault in non paged area - BSOD couple of tabs or even sometimes just running minecraft and trying to record my screen with Camstasia alone the PC will lock and jump to BSOD or if lucky the driver stop message will show up The weird thing is when I check my RAM and CPU usage in task manager I peak around - at the most I have also done many stress tests running Prime and Intel burn test following guides on the internet how to stress properly plus memtest x with passes which all come back clean In my motherboard settings I have changed the iGPU memory to MB so that half a gigabytes is dedicated to the built in GPU My question is am I trying to run too much of an internal graphics I have also tried an old DDR MB GPU and this has also had the quot display driver has stopped responding and has recovered quot message but I haven't any BSOD with it yet as I haven't run the same amount of tasks for my PC to perform as mentioned above and below However after writing this I will try the same procedure to replicate the problems with the iGPU but this time with the GPU card And I'll post the results With minecraft running more things such as mods etc compared to most minecraft users the server hosted on the same machine or just minecraft with no server and screen recording software is this too much for the PC to handle hence why Windows is crashing Much help appreciated Will

A:Page fault in non paged area - BSOD

Hello willowen100.

"display driver has stopped responding and now recovered" and BSOD's showing “page fault in non paged area” are supposed to be different issues. If you post following the Blue Screen of Death (BSOD) Posting Instructions, it will be helpful for us to suggest you something effective.

http://www.sevenforums.com/bsod-help-support/303183-page-fault-non-paged-area-bsod.html
Relevancy 64.93%

Recently go a new computer (one thats built). Installed drivers, updated windows, everything yet it still seems to get a bluescreen. Only happens in the mornings and all I need to do is shutdown and restart and no more bluescreens for the rest of the day.

Windows 7 Home Premium 64bit
AMD Phemon II X6 1055T Processor 2.80 GHz
Ram 4gb

A:BSOD (Page Fault in Nonpaged Area)

sorry to bump bt help me please, its still occuring =[

http://www.sevenforums.com/bsod-help-support/129331-bsod-page-fault-nonpaged-area.html
Relevancy 64.93%

Hello everybody,
I know a thing of two of computers but I'm not familliar with windows 8.1

This is a brand new laptop (MSI GT72), yet I have got 4 BSOD's page fault in nonpaged area (on a cold start only!!!)..

All caused by adress ntoskrnl.exe+1509a0.

I would like some tips how to resolve this.

You can find the dumps in the attachments!
Many thanks in advance!

A:BSOD page fault in nonpaged area

Nobody has any clue? I still have this problem..

It's weird cause it only happens when cold booting, makes me think one of the drivers isn't working properly, but I don't know which one or if I'm right..

http://www.eightforums.com/bsod-crashes-debugging/57978-bsod-page-fault-nonpaged-area.html
Relevancy 64.93%

Greetings Techsupportforum This is my first time making a post here on this website I'd like to take the time and say thank you for the members who will possibly Page Fault//Non Paged Area//BSOD be Page Fault//Non Paged Area//BSOD helping me with this issue Now for the show After googling this BSOD it appears its quite common on Windows So let me begin with my symptoms and what I've manged to somewhat unveil It started about a week ago I come back from vacation and I try to open ds Max The computer began opening the program I see the Page Fault//Non Paged Area//BSOD quot initailzation prompt screen quot and the computer crashes giving me the quot Page fault in nonpaged area quot Computer restarts I try again Samething ds max won't even start up the application before I get the BSOD I start to troubleshoot keeping my calm I begin opening all my programs i e Sony Vegas Adobe After Effects CS Vue Games and more All programs open up fine and no problems tinkering clicking random tasks to see if it would lock up and give me another BSOD I then start my research I come across numerous different posts and forums and different suggestions I then remembered I recently installed FL Studio trial version I uninstalled the program restarted the computer I try opening ds max I get a BSOD again same error I then tried a System Restore to the checkpoint of the day before my vacation I try opening ds max it crashes again I'm becoming a bit more intrigued now I download ds max trial thinking its a recent faulty update conflicting with Windows gives me the same BSOD A few days later I come across a forum someone with a close similar issue but with a different program he stated his driver was out of date I'm thinking thats what it has to be I go to amd com download the latest graphics card driver Still receive the BSOD I continue searching and I come across suggestions that it could be my RAM beginning to poop out or possible HDD failure I see a link posted by a fellow recommending to use a program called memtest I use a usb key I install the program reformating my usb stick I changed my boot setup too boot the usb it begins the test Mind you this was last night The guy recommended passes I allow the program to do its thing I reviewed what results were and all my RAMs passed with no errors So now I quot m here Below you will find attatched files or linked files of the results I received and the dump files I've concluded that its only the Autodesk Application ds max thats causing the BSOD only when I attempt to open the program I feel I'm getting closer to resolving this issue but I don't know which direction to take The BSOD screen wasn't showing me the file thats causing the crash but thank goodness for BSOD viewer it shows the initial file crashing Computer Specs Processor Intel Core i CPU GHZ Installed Memory GB System Type W -bit Graphics Card ATI Radeon HD series recently updated driver Quote Dump File - - dmp Crash Time AM Bug Check String PAGE FAULT IN NONPAGED AREA Bug Check Code x Parameter fffff b a Parameter Parameter fffffa ae e Parameter Caused By Driver wmiacpi sys Caused By Address wmiacpi sys af File Description Product Name Company File Version Processor x Crash Address ntoskrnl exe cc Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size below is the memtest results http i photobucket com albums a estresults jpg

A:Page Fault//Non Paged Area//BSOD

Hi -

The bugcheck = 0x50 = invalid memory referenced

Driver listed = wmiacpi.sys - but it is a default

http://sysnative.com/drivers/driver.php?id=wmiacpi.sys

See if Driver Verifier flags any 3rd party drivers - let it run 24 hours minimum -

http://www.techsupportforum.com/foru...ed-473665.html

If BSOD under D/V, run jcgriff2 BSOD app -

http://www.techsupportforum.com/foru...ta-452654.html

Regards. . .

jcgriff2

`

http://www.techsupportforum.com/forums/f299/page-fault-non-paged-area-bsod-642743.html
Relevancy 64.93%

I have been getting the page fault in nonpaged area bsod every time i try to launch any game through uplay and most recently the ro2 beta all other games function normally. I have tried everything I can think of uninstall/re-install, updating drivers, resetting the page file, running mem86, chkdsk, used seatools to check the drives. All hardware seems to be good.
Attached are the dmp files from when the bsod started happening.
Any help with this will be much appreciated.
dragonscape2.zip

A:BSOD page fault in nonpaged area

Welcome
All of your reports were consistent, which is usually a good sign. In your situation each report indicates that it could not identify the problem driver. Both the consistency and the indications on the report point toward a driver.
Lets see if we can find the cause. Thse instructions are equally applicable to Vista. Run the verifier for 36 hours.
Using Driver Verifier to identify issues with Drivers - Windows 7 Help Forums

http://www.vistax64.com/crashes-debugging/300141-bsod-page-fault-nonpaged-area.html
Relevancy 64.93%

Hi guys new to this forum so I hope Im doing everything allright This laptop is not Nonpage BSOD Fault Page in Area mine but my friends wifes This BSOD is occuring repeatedly maybe in connection with browsing in IE sometimes several times a day sometimes not in a week Attaching a dump from SF tool I have already tried OS recovery and some load tests like memtest p for several hours Only weird thing is that HD tune shows the whole disc as red should be green when looking for errors and also chkdsk reported that all clusters contain bad sectors But this is probably some weird stuff connected to having built-in ssd in one of the first ways it was done yrs ago I have taken the disc out and then checked with hdtune in another pc and everything was allright I have also BSOD Page Fault in Nonpage Area tried warranty claim when Ive thought that the disc is faulty but the computer was returned from repair saying everythings HW in order As you can see pretty complicated story Thanks in advance

A:BSOD Page Fault in Nonpage Area

Welcome to the Forum.


Code:
Microsoft (R) Windows Debugger Version 6.2.9200.20512 X86
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\Usra\Downloads\SF_07-01-2014\010214-13416-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.18247.amd64fre.win7sp1_gdr.130828-1532
Machine Name:
Kernel base = 0xfffff800`02e68000 PsLoadedModuleList = 0xfffff800`030ab6d0
Debug session time: Thu Jan 2 23:50:26.244 2014 (UTC + 6:00)
System Uptime: 3 days 1:05:02.274
Loading Kernel Symbols
...............................................................
................................................................
.................................................
Loading User Symbols
Loading unloaded module list
...................
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 50, {fffff88135dec360, 0, fffff88005b9ca18, 5}

*** WARNING: Unable to verify timestamp for igdpmd64.sys
*** ERROR: Module load completed but symbols could not be loaded for igdpmd64.sys

Could not read faulting driver name
Probably caused by : igdpmd64.sys ( igdpmd64+15aa18 )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced. This cannot be protected by try-except,
it must be protected by a Probe. Typically the address is just plain bad or it
is pointing at freed memory.
Arguments:
Arg1: fffff88135dec360, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffff88005b9ca18, If non-zero, the instruction address which referenced the bad memory
address.
Arg4: 0000000000000005, (reserved)

Debugging Details:
------------------


Could not read faulting driver name

READ_ADDRESS: GetPointerFromAddress: unable to read from fffff80003115100
GetUlongFromAddress: unable to read from fffff800031151c0
fffff88135dec360 Nonpaged pool

FAULTING_IP:
igdpmd64+15aa18
fffff880`05b9ca18 8b0408 mov eax,dword ptr [rax+rcx]

MM_INTERNAL_CODE: 5

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

BUGCHECK_STR: 0x50

PROCESS_NAME: csrss.exe

CURRENT_IRQL: 0

TRAP_FRAME: fffff880099c29d0 -- (.trap 0xfffff880099c29d0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=fffff880065cbb60 rbx=0000000000000000 rcx=000000012f820800
rdx=fffffa80098a50d0 rsi=0000000000000000 rdi=0000000000000000
rip=fffff88005b9ca18 rsp=fffff880099c2b60 rbp=fffffa8007378700
r8=0000000000000001 r9=fffff880099c2bc0 r10=0000000000000001
r11=0000000000000001 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei pl nz na po nc
igdpmd64+0x15aa18:
fffff880`05b9ca18 8b0408 mov eax,dword ptr [rax+rcx] ds:fffff881`35dec360=????????
... Read more

http://www.sevenforums.com/bsod-help-support/317644-bsod-page-fault-nonpage-area.html
Relevancy 64.93%

i don't know why this keep crashing pls help me

windows 7 ultimate 32-bit
4gb ram
ati radeon hd 4600
amd athlon x2 3.0ghz
asus motherboard


help please! i don't want to lose $25 to reformat my pc.

my new attachment is from non-safe mode boot. the one with a "2" name in filename

A:BSOD page fault in nonepaged area

i search the whole internet for the solution, and i stumbled upon how to know what causes BSOD on your system, i tried the steps and found out that the one causing is klif.sys . i uninstalled kaspersky, and uses removal tool but that doesn't seem to work, i tried the steps again and there goes again klif.sys?


Opened log file 'c:\debug.txt'
1: kd> .sympath srv*c:\symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: srv*c:\symbols*http://msdl.microsoft.com/download/symbols
Expanded Symbol search path is: srv*c:\symbols*http://msdl.microsoft.com/download/symbols
1: kd> .reload;!analyze -v;r;kv;lmnt;.logclose;q
Loading Kernel Symbols
...............................................................
................................................................
............................
Loading User Symbols
Loading unloaded module list
...............
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced. This cannot be protected by try-except,
it must be protected by a Probe. Typically the address is just plain bad or it
is pointing at freed memory.
Arguments:
Arg1: bb31e000, memory referenced.
Arg2: 00000000, value 0 = read operation, 1 = write operation.
Arg3: 83e3c84a, If non-zero, the instruction address which referenced the bad memory
address.
Arg4: 00000000, (reserved)

Debugging Details:
------------------

*** WARNING: Unable to verify timestamp for klif.sys
*** ERROR: Module load completed but symbols could not be loaded for klif.sys

READ_ADDRESS: GetPointerFromAddress: unable to read from 83dbc718
Unable to read MiSystemVaType memory at 83d9c160
bb31e000

FAULTING_IP:
nt!MiCompressRelocations+3d
83e3c84a 0fb731 movzx esi,word ptr [ecx]

MM_INTERNAL_CODE: 0

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

BUGCHECK_STR: 0x50

PROCESS_NAME: svchost.exe

CURRENT_IRQL: 0

TRAP_FRAME: 9e133610 -- (.trap 0xffffffff9e133610)
.trap 0xffffffff9e133610
ErrCode = 00000000
eax=7ffffa5a ebx=00000000 ecx=bb31e000 edx=00000000 esi=00000000 edi=bb31d4b4
eip=83e3c84a esp=9e133684 ebp=9e1336a4 iopl=0 nv up ei pl nz na pe nc
cs=0008 ss=0010 ds=0023 es=0023 fs=0030 gs=0000 efl=00010206
nt!MiCompressRelocations+0x3d:
83e3c84a 0fb731 movzx esi,word ptr [ecx] ds:0023:bb31e000=????
.trap
Resetting default scope

LAST_CONTROL_TRANSFER: from 83c9a5f8 to 83cd98e3

STACK_TEXT:
9e1335f8 83c9a5f8 00000000 bb31e000 00000000 nt!MmAccessFault+0x106
9e1335f8 83e3c84a 00000000 bb31e000 00000000 nt!KiTrap0E+0xdc
9e1336a4 83e5c6cd bb200000 00047e1c 00000008 nt!MiCompressRelocations+0x3d
9e133754 83e778a9 bb025000 9e1337dc 00000003 nt!MiRelocateImage+0x430
9e133878 83e84e51 9e1338cc 0000000d 9e133920 nt!MmCreateSection+0x797
9e1338ec 83e58c86 9e13397c 0000000d 9e133920 nt!NtCreateSection+0x16e
9e133968 83e586d4 9e133a28 bac66fb0 00000001 nt!PfpFileBuildReadSupport+0xe4
9e1339fc 83e5a0b4 00133a28 9e133b88 00000001 nt!PfpPrefetchFilesTrickle+0xdf
9e133aa4 83e59d71 bac66000 b4b41370 9e133b9c nt!PfpPrefetchRequestPerform+0x2a6
9e133af8 83e7397f 9e133b88 00000001 b4b41234 nt!PfpPrefetchRequest+0x16e
9e133bbc 83edf8f6 00a5fb3c 00000014 00000001 nt!PfSetSuperfetchInformation+0x182
9e133cf4 9224c307 0000004f 00000000 00000014 nt!NtSetSystemInformation+0xb00
WARNING: Stack unwind information not available. Following frames may be wrong.
9e133d20 83c9742a 0000004f 00a5fb3c 00000014 klif+0x32307
9e133d20 770464f4 0000004f 00a5fb3c 00000014 nt!KiFastCallEntry+0x... Read more

http://www.sevenforums.com/bsod-help-support/235808-bsod-page-fault-nonepaged-area.html
Relevancy 64.93%

a blue screen with that title pops up everytime i start my computer up and i can't access my main home screen. it never gets passed the windows load screen

Stop:0x00000050

(0xc3A00000, 0x00000000, 0x8053A8F3, 0x00000000)

from what i looked up it says it is usually a defective memory problem either L2 mem cache, video mem, or main memory. i asked a guy for his opinion at a local computer shop and he believes that it could be the hard drive. also i tried reformatting it and whenever it goes into the installation it goes to the same blue screen as well if i tried to go into safe made. please help

A:BSOD page fault in nonpaged area

Run memtest86+ - http://www.techsupportforum.com/2863029-post5.html

HDD Diagnostics
- http://www.carrona.org/hddiag.html
- http://www.techsupportforum.com/2828431-post7.html

http://www.techsupportforum.com/forums/f299/bsod-page-fault-in-nonpaged-area-571102.html
Relevancy 64.93%

Hello,

I've started getting BSODs with page_fault_in_nonpaged_area errors. I've also noticed that a lot of my webpages on chrome have been crashing lately.

Any help would be appreciated!

Thanks!

A:BSOD page fault in nonpaged area

Welcome to the forums Syssana,


Code:
BugCheck 50, {fffff68100002088, 0, fffff800030ec2d2, 5}

Could not read faulting driver name
Probably caused by : memory_corruption ( nt!MiUpdateWsle+122 )

Code:
Usual causes: Defective hardware (particularly memory - but not just RAM), Faulty system service, Antivirus, Device driver, NTFS corruption, BIOS
This bugcheck indicates device drivers have been referencing invalid memory addresses and performing read operations. We can see that a region of virtual memory which was marked non-pageable was referenced and a illegal page fault occurred.

You seem to have only 163 Windows Updates installed, I have around 205 Windows Updates installed, please check for any potential Windows Updates which will improve the security and stability of your system.Start
Type: Windows Update
Check for Updates/Install Updates
Reboot (if prompted)
Remove:


Code:
Start Menu\Programs\DAEMON Tools Lite







  
Quote: Originally Posted by Arc


Download SPTD standalone installer from Disk-Tools.com, and execute the downloaded file as guided below : Double click to open it.
Click this button only:

If it is grayed out, as in the picture, there is no more SPTD in your system, and you just close the window.



Daemon Tools uses a driver called sptd.sys, which is known to cause BSODs with Windows 7. It is recommend you remove this program, and use Windows own in-built features or ImgBurn.


Code:
2: kd> lmvm atikmdag
start end module name
fffff880`07285000 fffff880`07d44000 atikmdag T (no symbols)
Loaded symbol image file: atikmdag.sys
Image path: \SystemRoot\system32\DRIVERS\atikmdag.sys
Image name: atikmdag.sys
Timestamp: Fri Mar 09 04:04:49 2012 (4F598161)
CheckSum: 00A60CBF
ImageSize: 00ABF000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Your AMD graphics card driver seems to be outdated, and a possible cause, please update to the latest WHQL version.






Quote:
WHQL
Release Date: April 24th 2013
Version: 13.4
In Device Manager: 12.104


AMD Graphics Drivers & Software
Download Driver
Start Type: Device Manager
Expand Display Adapters
Right-Click Driver Name, Uninstall
Reboot
Run Driver Sweeper
Reboot
Install Downloaded Driver
Driver Sweeper will scan for any left over files from the old driver, old driver files can cause conflicts with new driver installations. Create a System Restore point beforehand, in case any problems or issues arise.

Driver Sweeper:Drivers - Clean Left over Files after Uninstalling

http://www.sevenforums.com/bsod-help-support/294644-bsod-page-fault-nonpaged-area.html
Relevancy 64.93%

Hello forums. I have had a BSOD issue for quite sometime, in an area I would say of about a year. It has been very minor, a crash every few weeks, and only when playing games, such as dota 2. Recently, the crashes have been becoming more common place and frequent. 3-4 times a day, and even every time I run specific games. I have always had a suspicion that my ram was going bad, but after running the windows memory test, with only 2 passes mind you; it came up error free. I'm done dealing with this, and i'm going to commit as much time was I need to fix this. I can't have this issue popping up when Uni starts up in a few weeks.

Cheers, Jesse.

A:BSOD page fault in none paged area

you may be right on this one, but you will need to run memtest for more passes than 2, 6-8 is usually the amount you want.

http://www.sevenforums.com/bsod-help-support/378296-bsod-page-fault-none-paged-area.html
Relevancy 64.93%

I've read through previous related BSOD threads and they did not help me. Recently I've been getting more BSODs, with them occurring more often when playing video games, I do also get an occasional crash when I have multiple flash heavy tabs open in Chrome. I have run a memory check, with no faults, I have reseated all my RAM, and done a chkdsk with no errors. Tried posting in the microsoft forums, but they're no help and haven't responded to me in several days. Attached are the necessary files.

My rig:
CPU: AMD FX-8120 8 Core
Motherboard: ASUS Sabertooth 990FX AM3+
RAM: G.SKILL Ripjaws Series 8GB & CORSAIR XMS3 4GB
Graphics: GeForce GTX 560 Ti
HD: SAMSUNG Spinpoint F3 HD103SJ

A:BSOD Page fault in non paged area

Welcome

Software Concern:

Code:
Start Menu\Programs\avast! Internet Security Public:Start Menu\Programs\avast! Internet Security Public
Start Menu\Programs\AVG PC Tuneup 2011 Public:Start Menu\Programs\AVG PC Tuneup 2011 Public
Start Menu\Programs\AVG PC Tuneup 2011\Utilities Public:Start Menu\Programs\AVG PC Tuneup 2011\Utilities Public
Start Menu\Programs\DAEMON Tools Lite Public:Start Menu\Programs\DAEMON Tools Lite Public
Avast! Antivirus is known to contribute in BSoDs. Please uninstall and use Microsoft Security Essentials
(At least to test. You can install it back later if we know it wasn?t causing a problem.)
→ Microsoft Security Essentials - Free Antivirus for Windows

The AVG Tune-up tools seem to be causing some problems for you, note that this sort of tune up utilities can actually cause damage to windows beyond repair. Please uninstall it using the free version of Revo Uninstaller (use advanced mode to remove registry leftover)
→ Revo Uninstaller Pro - Uninstall Software, Remove Programs easily, Forced Uninstall


Code:
PROCESS_NAME: avgnsa.exe
Daemon Tools is a known cause to BSoDs. Please uninstall it right away.

Free up your start-up, keep nothing except the antivirus.
→ Startup Programs - Change

Run the system file checker to scan the integrity of all protected Windows 7 system files and replaces incorrect corrupted, changed/modified, or damaged versions with the correct versions if possible
→ SFC /SCANNOW Command - System File Checker

Keep us posted of the results and any further BSoDs

http://www.sevenforums.com/bsod-help-support/257344-bsod-page-fault-non-paged-area.html
Relevancy 64.93%

Hi all I've recently run into the dreaded BSOD - Page Fault in Non-Paged Area screen Nonpaged BSOD Fault Page Area - In Initially it started randomly while I was copying some files over but now has escalated into always occurring every time when I start up Basically windows will start up and get past the welcome screen so I can see my desktop After a few seconds though the BSOD will show up with the error code of x FFFFF A A FFFFF I was wondering if anyone would assist in diagnosing what the issue may be and how to fix it I have attached the dump files in this post and the specs of my machine is I - GB RAM HD GB HDDS GB SSD TB GB GB Windows Ultimate Edit I've also performed memory tests but they do not show that anything is an issue there Edit This is what shows up on safe mode Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode BCP FFFFF A B BCP BCP FFFFF F BCP OS Version Service Pack Product

A:BSOD - Page Fault In Nonpaged Area

What memory tests have you run? How many passes did you run them for?
Since you did not find any hardware related problems, I suspect the following:
Code:
Start Menu\Programs\DAEMON Tools Lite Public:Start Menu\Programs\DAEMON Tools Lite Public
Start Menu\Programs\GIGABYTE\ET6 Public:Start Menu\Programs\GIGABYTE\ET6 Public
Start Menu\Programs\Utilities\EasyCleaner RAWRZ\Julz:Start Menu\Programs\Utilities\EasyCleaner RAWRZ\Julz
Start Menu\Programs\Video\MSI Afterburner RAWRZ\Julz:Start Menu\Programs\Video\MSI Afterburner RAWRZ\Julz
DaemonTools comes with a driver sptd.sys that is known to cause crashes.

EasyTune6 provides interfaces to the hardware for software based overclocking. Those interfaces can cause instability since software overclocking does not provide voltage changes necessary for overclocking to be stable.

3rd party Windows 7 optimization software is not required for Windows 7. Windows 7 is already light weight, so stripping it down further by cleaning the registry and removing Windows features damages the OS beyond repair so that a Clean Reinstall - Factory OEM Windows 7 is needed. This is the most likely scenario you are facing.

MSI Afterburner causes instability for the same reason as EasyTune6.

http://www.sevenforums.com/bsod-help-support/234407-bsod-page-fault-nonpaged-area.html
Relevancy 64.93%

Hello I need some help pc is getting BSOD going into windows normally or even safe mode I switched the memory sticks used only one at a time also replaced mem sticks with another mem that I have here same size and type still no go I also unplugged both dvd-rom and cd-rom drives and floppy drive and modem and rebooted but still get BSOD i then tried to do a recovery using the wind xp cd but get thru the process and select in the nonpaged area in Page BSOD fault recovery process BSOD Page fault in nonpaged area and after hitting enter i get the BSOD again I decided to format and re-install but no go again still get BSOD sorry I should say it is getting page fault in nonpaged area stop x I was thinking of pulling hd and formatting it through another pc but I am wondering if this will work or not what if this is a motherboard problem ugh ready to pull my hair I would appreciate any help I am working on a friend's pc so i will give as much as i know pc is a dimension mb ram need anything i will try to find it thx cjpatts

A:BSOD Page fault in nonpaged area

cjpatts,

I am sorry to hear you are having this issue!

I am correct in saying you REINSTALLED the operating system on this computer?

If not, what was the last thing that happened just before you received this error message?

Most of the time this error message is related an application issue or an update of the OS or an application.

If this is the case, and the OS has not been reinstalled, try running the last known good option. It will often times take care of the issue.

As the computer is starting, the screen will go blank with the cursor in the top left corner. Press the F8 key 2 or 3 times to get to the menu with last known good on it. Select it and see what happens.

If you did reinstall the OS, then it is a hardware error. But it is unusual to have 0x00000050 Page_Fault_In_Non-Paged_Area on a hardware error. You may have an issue with the hard drive.

If you suspect the hard drive, you can purchase a VERY inexpensive drive and install the OS to that. Then take the original drive and see if you can slave it into the system so you can get the files off of it.

Let me know how you make out and I will see what else I can offer if needed.

http://www.techsupportforum.com/forums/f10/bsod-page-fault-in-nonpaged-area-415506.html
Relevancy 64.93%

Hi,Im getting a Bsod for page_fault_in_nonpaged_area bsod, any help is appreciated, here are the dump logs
 

Relevancy 64.93%

Hi guys I am having big problems page BSOD in nonpaged area fault 8.1 Win with my notebook I am getting this quot page fault in nonpaged area quot BSOD times a day I don't know what caused it but I ran this program called quot who crashed quot and I got this its multiple crashes I also included that file you always want Thank you for you help guys MSI-pi zip Crash BSOD page fault in nonpaged area Win 8.1 dump directory C Windows Minidump Crash dumps are enabled on your computer On Fri GMT your computer crashed crash dump file C Windows Minidump - - dmp This was probably caused by the following module ntoskrnl exe nt x A Bugcheck code x xFFFFE F C x xFFFFF B x Error PAGE FAULT IN NONPAGED AREA file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company BSOD page fault in nonpaged area Win 8.1 Microsoft Corporation description NT Kernel amp System Bug check description This indicates that invalid system memory has been referenced This appears to be a typical software driver bug and is not likely to be caused by a hardware problem The crash took place BSOD page fault in nonpaged area Win 8.1 in the Windows kernel Possibly this problem is caused by another driver that cannot be identified at this time On Fri GMT your computer crashed crash dump file C Windows memory dmp This was probably caused by the following module qcamainx sys Qcamainx x D Bugcheck code x xFFFFE F C x xFFFFF B x Error PAGE FAULT IN NONPAGED AREA file path C Windows system drivers qcamainx sys product Driver for Qualcomm Atheros QCA x Network Adapter company Qualcomm Atheros Inc description Qualcomm Atheros Extensible Wireless LAN device driver Bug check description This indicates that invalid system memory has been referenced This appears to be a typical software driver bug and is not likely to be caused by a hardware problem A third party driver was identified as the probable root cause of this system error It is suggested you look for an update for the following driver qcamainx sys Qualcomm Atheros Extensible Wireless LAN device driver Qualcomm Atheros Inc Google query Qualcomm Atheros Inc PAGE FAULT IN NONPAGED AREA On Fri GMT your computer crashed crash dump file C Windows Minidump - - dmp This was probably caused by the following module ntoskrnl exe nt x A Bugcheck code x xFFFFE x xFFFFF x Error PAGE FAULT IN NONPAGED AREA file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System Bug check description This indicates that invalid system memory has been referenced This appears to be a typical software driver bug and is not likely to be caused by a hardware problem The crash took place in the Windows kernel Possibly this problem is caused by another driver that cannot be identified at this time On Thu GMT your computer crashed crash dump file C Windows Minidump - - dmp This was probably caused by the following module ntoskrnl exe nt x A Bugcheck code x xFFFFE F x xFFFFF B F x Error PAGE FAULT IN NONPAGED AREA file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System Bug check description This indicates that invalid system memory has been referenced This appears to be a typical software driver bug and is not likely to be caused by a hardware problem The crash took place in the Windows kernel Possibly this problem is caused by another driver that cannot be identified at this time On Thu GMT your computer crashed crash dump file C Windows Minidump - - dmp This was probably caused by the following module ntoskrnl exe nt x A Bugcheck code x xFFFFE E x xFFFFF BF EA x Error PAGE FAULT IN NONPAGED AREA file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System Bug check description This indicates that invalid system memory has been referenced This appears to be a typical softwa... Read more

A:BSOD page fault in nonpaged area Win 8.1

Uninstall Daemon tools, disable nVidia Streaming Kernel Service in services.msc. Update drivers in red. Uninstall MSI software
Also, in the first dump file, the Killer Network Manger is blamed. This has caused problems in the past. I would suggest you to follow the below quote (Follow Note 2 first. If it does not work, follow note 1) -
(Thanks Usasma!)At times the Killer Network Manager may cause BSOD problems:

NOTE1:Link thanks to blueelvis (15Oct2014): https://forum-en.msi.com/index.php?topic=178064.0 This is a method for removing all the network software and only installing the driver. Perfect for those issues that can't be resolved any other way!

NOTE2: See this link first: BSOD while playing on msi gt70 dragon edition 2 (thanks to kaelaan) It appears that the Killer Service problem was solved with the latest release of the Qualcomm versions of the drivers (so try updating to a version dated from later in 2014).
The Qualcomm Atheros Killer Service/KillerNetManager is known to cause BSOD's. Please follow the workaround instructions here:

First, open the Run dialog (Win + R keys) and type in "services.msc" (without the quotes) and press Enter
Scroll down and locate the "Qualcomm Atheros Killer Service" and right click on it. Select "Stop"
Right click on it again and this time select "Properties"
In the dropdown box for "Startup type", select "Disabled", then click on the "OK" button at the bottom of the window

Next, open Task Manager (right click on TaskBar and select "Task Manager")
Click on the "More details" dropdown (if present)
Click on the "Startup" tab
Scroll down and locate the "KillerNetManager" entry, right click on it and select "Disable"
There may also be an Install Shield (with the Killer gaming K next to it), if so Right click on it and select "Disable"
Finally, restart the system in order for the changes to take affect.
At times the Killer Network Manager will continue to load. If so, it's usually listed in the MSINFO32...Software Environment...Startup Programs section. If it is, please try this:

It may be that the instructions aren't stopping everything.
In some cases, there's a program running out of the Program Files/Program Files (x86) directory.
"c:\program files\qualcomm atheros\killer network manager\killer~1.exe" (NOTE: killer~1.exe is most likely killernetmanager.exe)
In other cases, there's a program running out of c:\windows\installer\{Long string of letters, numbers, and dashes}\networkmanager.exe_130c27d738f34c89bddf21bcfd74b56d.exe (the long string of letters and numbers may change)

Here's some things to try
1) Please see if there are any entries in the Startup tab of Task Manager that are related to Qualcomm/Atheros/Killer Network Manager (and NOT the card itself) and disable them (please let us know what you find) Be careful as the wrong selection can disable the network card.
2) Check in "msconfig" for any entries that aren't in the Startup tab of Task Manager. Let us know if you find any Qualcomm/Atheros/Killer entries there (we'll disable them differently if they are there).
3) Locate the "c:\program files\qualcomm atheros\killer network manager\killer~1.exe" and rename the .exe to .BAD (the killer~1 is actually a filename that starts with killer and ends with .exe) There will be an error in event viewer, but it'll stop the bugger from loading.
4) Locate the "c:\windows\installer\{Long string of letters, numbers, and dashes}\networkmanager.exe_130c27d738f34c89bddf21bcfd74b56d.exe" entry and rename the last .exe to .BAD (the long string of letters and numbers may change)

Just FYI - here are the MSI workaround instructions: MSI USA - Online Technical Support FAQ


Code:
MBfilt64.sys Fri Jul 31 05:40:32 2009 (4A7267B0)
Realtek HiDefinition Audio driver (file labelled as Creative Audio Driver) - Was found in th... Read more

http://www.eightforums.com/bsod-crashes-debugging/61902-bsod-page-fault-nonpaged-area-win-8-1-a.html
Relevancy 64.93%

Lately I've had a couple BSODs, both only while gaming. The games seem to freeze up and i can get no response from my pc. After a few moments i get a BSOD and it dumps physical memory and reboots. the name is 'PAGE FAULT IN NONPAGED AREA'

I've uploaded the most recent minidump, can anyone tell me whats happening in my rig?

A:Page fault in nonpaged area (bsod)

Hi, silverfang and welcome to the forum. Sorry that you are having problems. Please read this thread, follow the instructions and post back. We will be glad to help you.

http://www.sevenforums.com/crashes-d...tructions.html

http://www.sevenforums.com/bsod-help-support/128027-page-fault-nonpaged-area-bsod.html
Relevancy 64.93%

Hello, I'm recieving this BSOD when I try to install antivirus software. I had Kaspresky pure latest version and I uninstalled it, then I tried to install avast BSOD showed up, then I tried Avira, same thing.

I uploaded latest two mini dumps files.

Thanks in advance.
 

A:BSOD page fault in nonpaged area

It appears that Avast is the culprit. Download there Uninstall Utility and follow the instructions.
 

https://forums.techguy.org/threads/bsod-page-fault-in-nonpaged-area.1114216/
Relevancy 64.93%

Hi and Hello Everyone!

My system (Laptop) is giving BSOD and I dont know whats the problem.
sometimes it says it Page fault in nopaged area and other times it says Kernel something??

The only thing I find out is when I change the pagefile size 2 to 3 times and then reboot the system it fixes it (means BSOD doesn't comes again untill the computer is shutdown and restared again another day).

? OS - Windows 7
? x64
? Windows 7 (from the start)
? Purchased Version, didn't come pre installed.
? Age of system (hardware) - About 6 or 7 months.
? Age of OS installation - same about 6 or 7 months.

? CPU - Intel core i5 2450M Cpu @2.50GHz
? Video Card - Nvidia GeForce GT 525M
? MotherBoard - no idea
? Power Supply - brand & wattage No idea

? System Manufacturer - Dell
? Exact model number (if laptop, check label on bottom) Inspiron N 5110


I have attached the files needed.
Will Be waiting for your Kind reply.

Happy Holidays!

A:BSOD Page Fault in Nonpaged Area

Quote:




? Purchased Version, didn't come pre installed.




If it is a purchased version of Windows 7, then why do you have a Dell SLIC Windows 7 key on the system?

I suspect your installation is counterfeit based on the information given. That coupled with no updates being installed makes me further suspicious. People often avoid updating Windows when they are trying to avoid having it phone home and let Microsoft know it is not a legal installation.


I am afraid your installation is not genuine. Non-Genuine Windows contains security leaks and also cannot be properly updated which may result in instabilities and blue screen crashes. If you were not aware that your Windows was Non-Genuine, contact your seller or the company that provided the seller and file a complaint. Also let Microsoft know of the problem: Protect Yourself from Piracy

I am sorry, but due to forum rules, we may not assist you further until you have installed a genuine version of Windows. To put the genuine Windows on, I strongly suggest you backup any important data, format your hard disk, and reinstall Windows 7 to make sure all remnants are removed of the software that you used to make Windows work before. If you do not clean re-install, you may be left with a compromised system and your identity, bank accounts, credit card information, etc. may continue to be at risk as they are now. Once you install a genuine version:Please download and run the MGADiag tool. When it finishes, hit the copy button, and paste in your next post with [code]<MGADiag info>[/code] surrounding the MGADiag info.

http://www.techsupportforum.com/forums/f299/bsod-page-fault-in-nonpaged-area-680813.html
Relevancy 64.93%

Hello I replaced my old HDD for an SSD After turning on AHCI-mode in the BIOS and formatting the new SSD I installed Windows Ultimate x SP Now that Windows installation is complete I installed all the drivers for my hardware Since then after starting Windows a BSOD appears with the error area BSOD fault nonpaged in Page quot Page fault in nonpaged area quot It happens between seconds to a few minutes after Windows has loaded I ran Memtest for a few hours passes but it found no errors Because of this I assume that the BSOD has nothing to do with the RAM There seems to be no problems in Windows safe mode so I BSOD Page fault in nonpaged area launched BlueScreenView in safe mode to get more information about BSOD Page fault in nonpaged area the BSOD's The dump files contain the following Bug Check String PAGE FAULT IN NONPAGED AREA Bug Check Code x Parameter fffff a cde Parameter Parameter fffff d f f Parameter Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe a My system specs Motherboard Asrock H M-GE SSD Samsung EVO Gb Graphic Card Sapphire Radeon HD -- gt in Windows Device Manager this is listed as quot AMD Radeon R Series quot I attached BSOD Page fault in nonpaged area the ZIP-file created by DM Log Collector Any help would be appreciated Thanks

A:BSOD Page fault in nonpaged area

Hello, johnq55. It seems that much of your problems are due to an illegal Operating System. The Operating System you have installed was Blacklisted before Windows 7 was released. It can only be activated by a hackers exploit which alters protected system files.

Counterfeit installations such as yours contain heavily modified code that causes the installation to behave it unexpected ways. Analyzing BSOD's and determining their causes on these sorts of installations is very unreliable. For this reason, many analysts won't attempt it.

My recommendation is to install a genuine Windows 7. This will minimize the problems you are experiencing, and make subsequent diagnosis of BSOD's far more reliable. Once you are running a Genuine Windows 7 installation, and are still experiencing BSOD's, we will be happy to help you solve them

http://www.sevenforums.com/bsod-help-support/374530-bsod-page-fault-nonpaged-area.html
Relevancy 64.93%

Yes I have Area Nonpaged Fault BSOD-Page in fallen victim to the infamous alias doesn t really tell you anything code stop error To set up my current state of frustration here s my story A few weeks ago my rig began randomly blue screening and hanging no real rhyme or reason just bam blue screen or hang I began the usual diagnostics restored to previous states ensured current drivers etc ultimately to discover one of my RAM sticks as bad Memtest I replaced both sticks with a different set formatted re-installed the OS long story got the system back to operation Up until today all was good my rig was seemingly running as strong as when I built it Then bam BSOD code with the ambiguous error statement other than codes that I have not been able BSOD-Page Fault in Nonpaged Area to find definitive explanation for At this point however I have noticed that the first and subsequent BSs I have gotten are only during video or D applications pretty easy at this point to suspect one of the video cards But before I spend yet another week tearing into my box after I spent what little spare time I ve had in the last two weeks putting it back together I thought I d ask if there is anyone who can clarify the error codes for me or point me in the direction of clarifying them myself googling turned up zip The code STOP x xBAC F x xBAC F x My rig relevent specs Mobo XFX i nVidia chipset most current BIOS CPU BSOD-Page Fault in Nonpaged Area E stock voltage and clock GHz RAM Gig - gig dual channel kit OCZ Reaper DDR PSU Corsair TX amp single v rail GPU XFX GTs in SLI drivers OS Windows Xp Pro bit SP all current updates Onboard audio used current drivers - DVD RW drives SATA HDDs totaling Gig all nicely fitting in a well circulating Cooler Master Centurion My guess at the code would be since there are two BAC errors with one followed by an IRQ error that maybe one card is bad Takin a wild shot there but like I said my searches up to this point have been fruitless Any help would be much appreciated TBolt Edit Forgot to mention that following a BS I reboot into Windows normally fine and can BSOD-Page Fault in Nonpaged Area stay there for relatively long periods of time so long as I don t do anything too demanding or requiring heavy use of video d sniff video card or driver sniff I ll attach a dump file or two once I figure out how Edit Ah ha here we go attachments nbsp

A:BSOD-Page Fault in Nonpaged Area

Minidumps are most commonly placed in: C:\WINDOWS\Minidump

You can upload your dumps, as is, with your posts.
 

http://www.techspot.com/community/topics/bsod-page-fault-in-nonpaged-area.110557/
Relevancy 64.93%

Hello, I've just put together my new computer and sadly I've already gotten two BSOD's. Considering all the software on it is pretty new, I'm not sure what could be causing it. It occurs when I'm trying to shut down or reboot. The last things I remember doing before this started happening were applying some important windows updates (about 5 or so), steam, teamspeak, also configured msi afterburner for a custom automatic fan profile..

I'd appreciate it very much if I had some help figuring out what's going on, as i'd like to take care of it with the least amount of crashes possible :] (I assume it could hurt my hardware)

A:BSOD Page Fault in Nonpaged Area

Code:
BugCheck 50, {ffffffffffffffd0, 1, fffff80002cd312c, 0}

*** WARNING: Unable to verify timestamp for AppleCharger.sys
*** ERROR: Module load completed but symbols could not be loaded for AppleCharger.sys

Could not read faulting driver name
Probably caused by : AppleCharger.sys ( AppleCharger+1a9b )

Code:
Usual causes: Defective hardware (particularly memory - but not just RAM), Faulty system service, Antivirus, Device driver, NTFS corruption, BIOS
AppleCharger.sys seems to be causing the crash here, and according to the DRT (Driver Reference Table) may cause BSODs with Windows 7. AppleCharger.sys is provided by Gigabyte, and I recommend you uninstall this driver to test for stability and compatibility improvements.

Remove:


Code:
2: kd> lmvm AppleCharger
start end module name
fffff880`04983000 fffff880`0498b000 AppleCharger T (no symbols)
Loaded symbol image file: AppleCharger.sys
Image path: \SystemRoot\system32\DRIVERS\AppleCharger.sys
Image name: AppleCharger.sys
Timestamp: Wed Nov 02 02:46:00 2011 (4EB0AEE8)
CheckSum: 0000C20A
ImageSize: 00008000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
More Information - AppleCharger.sys - Driver Reference Table

http://www.sevenforums.com/bsod-help-support/269956-bsod-page-fault-nonpaged-area.html
Relevancy 64.93%

? Windows 7
? 64 Bit OS
? Windows 7
? Retail Version of W7
? ~2.5 Years of age all around

? i5 2500k
? Galaxy GTX 570
? Biostar TZ77A
? Corsair TX750
? Corsair Vengeance 2x4GB @ 1600MHz

I have attached a .zip of the information required.

I hope I can find some help here, last solution.


Additional information: I started getting these BSODs after I changed my RAM (from 1333MHz 4x2GB to 1600MHz 2x4GB, I only get them while intensively gaming.

A:BSOD: Page Fault in Non Paged Area

Recommendations:Crashes are likely caused by your NETGEAR WG111v3 54Mbps Wireless USB 2.0 Adapter. USB wireless network adapters are known to cause blue screen crashes. USB ports do not supply reliable power support for these devices. Couple that with your out of date driver for the device, and you are nearly guaranteeing that you have crashes. I would advise replacing the USB adapter with a PCI wireless network adapter to provide better support and stability. If you are unable to do so, then make sure the drivers for the device are up to date and supported within Windows 7; yours are pre-Windows 7.
scmndisp.sys Wed Jan 17 00:48:03 2007 (45ADD4B3)
Netgear Neutral Wireless Solution
http://www.carrona.org/drivers/driver.php?id=scmndisp.sys

rtlprot.sys Fri Apr 20 03:16:48 2007 (46288500)
Realtek RtlProt Wireless LAN Utility Protocol Driver
http://www.carrona.org/drivers/driver.php?id=rtlprot.sys

jswpslwfx.sys Thu May 15 04:28:50 2008 (482C1062)
D-Link USB Wireless Adapter Driver
http://www.carrona.org/drivers/driver.php?id=jswpslwfx.sys

I would also suggest that you remove MSI Afterburner from the system.Uninstall or change a programRTCore64.sys Tue Sep 6 06:24:50 2011 (4E661112)
RivaTuner/EVGA Precision/MSI Afterburner (known BSOD issues w/Win7)
http://www.carrona.org/drivers/driver.php?id=RTCore64.sys

Outdated and Problematic Drivers:You should update/replace/remove the following drivers. Any drivers that are known to cause BSODs, please remove the software or remove the drivers and then remove the device; steps to do so are given after the list of outdated drivers. If you have ASACPI.sys installed, make sure it is updated and not pre-2009; pre-2009 versions are known to cause BSODs:
BIOS64.sys Sat Jun 7 18:12:00 2003 (3EE27F50)
This is probably aBIOSTAR I/O driver file
http://www.carrona.org/drivers/driver.php?id=BIOS64.sys

mcdbus.sys Tue Feb 24 03:34:07 2009 (49A3CD1F)
MagicISO SCSI Host Controller driver
http://www.carrona.org/drivers/driver.php?id=mcdbus.sys

anodlwfx.sys Fri Mar 6 03:10:08 2009 (49B0F680)
ALPHA Networks Filter Driver
http://www.carrona.org/drivers/driver.php?id=anodlwfx.sys
To update drivers, make sure to download the drivers from the manufacturer and not using 3rd party programs. Your drivers should be found from your motherboard support site (ASUS, Gigabyte, MSI, etc.) or your vendor support site (Dell, HP, Toshiba, Sony, etc.) first. If you have devices you bought yourself, the drivers for those devices need to be downloaded from the manufacturer support site for those devices. If you need help, let us know.

To remove drivers, do so by uninstalling the device or software associated with the driver. Devices can be uninstalled through device manager, and then the device itself should be physically removed from the system if possible.Uninstall or change a program

Open Device Manager
Software Concerns:
Code:
Start Menu\Programs\CleanMyPC Registry Cleaner
I do not recommend automated optimization tools for Windows. I especially do not recommend registry cleaning as an "optimization" step because automated registry cleaning causes more harm to the registry than it actually repairs.

In the future, if you need help optimizing Windows 7, please follow the steps to Optimize Windows 7 for better performance. Uninstall or change a program

Optimize Windows 7 for better performance

The Assumptions You Make About Your Slow PC (and Why They're Probably Wrong)
3rd Party Drivers: The following is for information purposes only. My recommendations were given above. The drivers that follow belong to software or devices that were not developed by Microsoft. Any drivers in red should be updated/replaced/removed. You can find links to the driver information and where to update the drivers in the section after the code box:

Code:
*****... Read more

http://www.techsupportforum.com/forums/f299/bsod-page-fault-in-non-paged-area-683118.html
Relevancy 64.93%

Hi Since I ve been getting a BSOD about every - minutes in Windows Vista Ultimate x It s error code x stating PAGE FAULT IN A NONPAGE AREA Another point to note is that it always includes this line quot Could not read faulting driver name Probably caused by Ntfs sys Ntfs memcpy c quot I ll include some dump files and Fault in Page NonPage BSOD Area quote one below The steps I have taken so far include running a chkdsk run memtest for complete pass RAM s fine reinstalled NVIDIA drivers and my Realtek ethernet drivers ran Western Digital diagnostic utility on my harddrive Page Fault in NonPage Area BSOD and it s apparently OK replaced the ntfs sys with a friend s Have since reverted back to my original after no fix and run in safe mode to make sure a non-Windows service wasn t causing it still crashed Also I can t think of any driver hardware I ve installed in the past week Any help would be Page Fault in NonPage Area BSOD greatly appreciated Jared Code Microsoft R Windows Debugger Version AMD Copyright c Microsoft Corporation All rights reserved Loading Page Fault in NonPage Area BSOD Dump File C Windows Minidump Mini - dmp Mini Kernel Dump File Only registers and stack trace are available Symbol search path is SRV c websymbols http msdl microsoft com download symbols Executable search path is Windows Server Kernel Version Service Pack MP procs Free x Product WinNt suite TerminalServer SingleUserTS Built by amd fre vistasp gdr - Kernel base xfffff a PsLoadedModuleList xfffff c cdb Debug session time Sun Aug GMT- System Uptime days Loading Kernel Symbols Loading User Symbols Loading unloaded module list Bugcheck Analysis Use analyze -v to get detailed debugging information BugCheck fffffa b a ff fffffa Could not read faulting driver name Probably caused by Ntfs sys Ntfs memcpy c Followup MachineOwner --------- kd gt analyze -v Bugcheck Analysis PAGE FAULT IN NONPAGED AREA Invalid system memory was referenced This cannot be protected by try-except it must be protected by a Probe Typically the address is just plain bad or it is pointing at freed memory Arguments Arg fffffa b a ff memory referenced Arg value read operation write operation Arg fffffa If non-zero the instruction address which referenced the bad memory address Arg reserved Debugging Details ------------------ Could not read faulting driver name READ ADDRESS GetPointerFromAddress unable to read from fffff c fffffa b a ff FAULTING IP Ntfs memcpy c fffffa c b c af mov r qword ptr rdx rcx- MM INTERNAL CODE CUSTOMER CRASH COUNT DEFAULT BUCKET ID COMMON SYSTEM FAULT BUGCHECK STR x PROCESS NAME System CURRENT IRQL TRAP FRAME fffffa b ce -- trap xfffffa b ce NOTE The trap frame does not contain all registers Some register values may be zeroed or incorrect rax rbx rcx fffffa fea rdx ffffffe c rsi fffff b rdi fffffa rip fffffa rsp fffffa b e rbp ffffffff r ffffffff r ffffff r fffffa b f r fffffa fea r r r r iopl nv up ei ng nz na po nc Ntfs memcpy x c fffffa c b c af mov r qword ptr rdx rcx- ds fffffa b a ff Resetting default scope LAST CONTROL TRANSFER from fffff aaa e to fffff a c STACK TEXT fffffa b be fffff aaa e fffffa b a ff fffffa b ce nt KeBugCheckEx fffffa b bf fffff a af ffffffff nt MmAccessFault x f fffffa b ce fffffa fffffa e fffffa fffffa d f a nt KiPageFault x fffffa b e fffffa e fffffa fffffa d f a fffffa b f Ntfs memcpy x c fffffa b e fffffa a fffffa b fffff b Ntfs NtfsCopyFromMdl x b fffffa b f fffffa d fffff b fffffa b Ntfs NtfsPrepareSparseWriteBuffer x fffffa b fb fffffa bc fffffa b f fffffa fffff b Ntfs FNODOBFM string' x f fffffa b fffffa f fffffa b f fffffa b d Ntfs NtfsPrepareBuffers x fffffa b f fffffa bf e fffffa b f fffffa Ntfs NtfsNonCachedIo x c fffffa b c fffffa f fffffa b f fffffa fffffa b fffffa b Ntfs NtfsCommonWrite x ce fffffa b c fffffa e fffffa b fffffa fffffa e c fffffa c cb Ntfs NtfsFsdWrite x fffffa b fffffa dd fffffa d ac fffffa e fffffa e c fffff bc b fltmgr FltpLegacyProcessingAfterPreCallbacksCompleted x fffffa b a fffff abbbcd fffffa... Read more

A:Page Fault in NonPage Area BSOD

While this error could mean any number of things, I'll throw in my 2 cents.

Are you overclocking your PC at all? I was getting a PAGE_FAULT_IN_A_NONPAGE_AREA when I was putzing around with my overclock. It went away once I toned things down.

So I suppose by extension, it could be a heat issue even if you aren't overclocking. Is the machine getting adequate ventilation? You could try running the machine with the case exposed to see if the error stops.
 

https://forums.techguy.org/threads/page-fault-in-nonpage-area-bsod.739334/