Windows Support Forum

BSOD after reinstalling windows.

Q: BSOD after reinstalling windows.

Hello everybody.Im new to this forum.
Im going to college and I recently bought an used laptop.
I bought a Dell Latitude E6520 laptop.

First off the laptop was working fine but only 4 of 8 gb ram was usable .(win ultimate 32 bit )
So I thought why not format the laptop and use 64 bit.(so I could use 8 gb of ram)
Did a clean install, everything went fine , 8 gb ram was usable.Started installing the proper drivers, updating windows etc..

After 2 days or so BSOD started appearing.I never got BSOD so im not good at fixing it.
Please somebody check the dumps and locate the problem.
Also id like to mention that BIOS is locked.(ill really appreciate if somebody can unlock the bios, ill pay)

Thanks a lot

Relevancy 100%
Preferred Solution: BSOD after reinstalling windows.

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: BSOD after reinstalling windows.

Please provide all the files following this tutorial so we can provide a complete analysis: Blue Screen of Death Posting Instructions

http://www.sevenforums.com/bsod-help-support/305294-bsod-after-reinstalling-windows.html
Relevancy 53.32%

Here is the pastebin from the windows debugger http://pastebin.com/ZBkrM5XG
 
I put in an SSD and since I've been getting BSOD every once and a while. I get Kernel data inpage error and Critical process died. I believe the issue is with the csrss but I don't think it is a virus. It was recommended to me to clean install windows but now when I try to refresh it says the drive of instillation is locked and when I try to reset it tells me the required partition is missing.
 
Can anyone help me out with this? 
 
Thanks in advance.

A:Looking for some help with BSOD / Reinstalling windows

What SSD do you have? Did you have the last firmware installed of the SSD?

http://www.bleepingcomputer.com/forums/t/563636/looking-for-some-help-with-bsod-reinstalling-windows/
Relevancy 53.32%

so i had a really long day yesterday with my computer and to make a long story short, i had to reinstall windows and format. it workd fine and as i was reinstalling programs, it froze and an error message came when i tried to restart, something about a missing windows file blah bah whatever. so i figured i'd just go ahead and reinstall windows again and format it, again. This is XP Pro by the way, and i inserted the disc followed the instructions, the push enter to install windows and the license agreement comes up. just as i push F8 to agree to the license the Blue Screen Of Death appears with IRQL_NOT_EQUAL_OR_LESS. i know my ram is fine and its not overheating since its not even on before i try to install windows. any help would be greatly appreciated.

A:reinstalling windows xp pro getting BSOD

by the way, the missing fil is windows\system32\config\system and when i tried to go to repair i got the BSOD right when i picked which os to repair. this is really frusrating. any ideas?

http://www.techsupportforum.com/forums/f10/reinstalling-windows-xp-pro-getting-bsod-106448.html
Relevancy 53.32%

Hi,

first of all sorry for grammar mistakes and I really hope you can help me with solving this issue. Every time I'm playing I get BSODs.

I have a PC which I bought last year in September. My OS is Windows 7 x 64.
Yesterday evening I formatted my pc and reinstalled windows 7 - hoped it will solve all the previous problems with BSODs.

So now I have a "clean" PC but again I got a BSOD..

attached the dump file. Your help will be really appreciated...

Thanks so much in advance!
DaTa

A:BSOD again even after reinstalling windows..

  
Quote: Originally Posted by DaTa82


Hi,

first of all sorry for grammar mistakes and I really hope you can help me with solving this issue. Every time I'm playing I get BSODs.

I have a PC which I bought last year in September. My OS is Windows 7 x 64.
Yesterday evening I formatted my pc and reinstalled windows 7 - hoped it will solve all the previous problems with BSODs.

So now I have a "clean" PC but again I got a BSOD..

attached the dump file. Your help will be really appreciated...

Thanks so much in advance!
DaTa


This crash was caused by your video driver. Please use these to remove and then re-install

When upgrading your graphic driver you MUST remove all traces of the current driver. In order to do that we recommend using Guru3D - Driver Sweeper

When it is removed then download and install the fresh copy.


Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\K\Desktop\Windows_NT6_BSOD_jcgriff2\021011-23384-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols;srv*e:\symbols
*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16695.amd64fre.win7_gdr.101026-1503
Machine Name:
Kernel base = 0xfffff800`0305d000 PsLoadedModuleList = 0xfffff800`0329ae50
Debug session time: Thu Feb 10 13:21:00.834 2011 (GMT-5)
System Uptime: 0 days 0:46:52.098
Loading Kernel Symbols
...............................................................
................................................................
....................
Loading User Symbols
Loading unloaded module list
......
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck D1, {10, b, 0, fffff8800460be12}

Unable to load image \SystemRoot\System32\drivers\dxgmms1.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for dxgmms1.sys
*** ERROR: Module load completed but symbols could not be loaded for dxgmms1.sys
Probably caused by : dxgmms1.sys ( dxgmms1+be12 )

Followup: MachineOwner
---------

2: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arguments:
Arg1: 0000000000000010, memory referenced
Arg2: 000000000000000b, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff8800460be12, address which referenced memory

Debugging Details:
------------------
READ_ADDRESS: GetPointerFromAddress: unable to read from fffff800033050e0
0000000000000010

CURRENT_IRQL: b

FAULTING_IP:
dxgmms1+be12
fffff880`0460be12 498b4010 mov rax,qword ptr [r8+10h]

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

BUGCHECK_STR: 0xD1

PROCESS_NAME: System

TRAP_FRAME: fffff88002d8c120 -- ... Read more

http://www.sevenforums.com/bsod-help-support/143765-bsod-again-even-after-reinstalling-windows.html
Relevancy 53.32%

Hi, I keep getting blue screen of death every hour... I am using Windows 7 and have reinstalled it over 5 times and keep getting BSOD. I have Lenovo laptop and use OneKey Recoverey feature to reinstall windows 7. i sometime got Blue screen in middle of reboot process also. I first get plugins start crashing on me like Shockwave etc for google chrome and sometime chrome window just closes. I also get all sort of blue screen errors like:

BAD_POOL_HEADER
MEMORY_MANAGEMENT
and many more...

Would this stop if i install vesta instead? and if so could i use Vista CD that came for Dell Laptop? Would it work for Lenovo?
HELP PLEASE... Literally banging my head aganist the wall here...

Thanks

A:Keep Getting BSOD even after reinstalling Windows 7

BSOD screen flashes out a stop code (error) , that sometimes explain the main cause, and if it did'nt work, then may be its some hardware device that is not supported by your OS, and one more reason is the incompatibility of some software...
May be you have installed a s/w that is not going properly with your system...
I suggest you to restore your system settings and set check points. this will help you i think...and don't forget to restart your system in Safe Mode.
I hope this information will work out...

http://www.techsupportforum.com/forums/f299/keep-getting-bsod-even-after-reinstalling-windows-7-a-692030.html
Relevancy 53.32%

I'm getting all kinds of BSOD. "Interrupt_exception_not_handled" "kernel_security_check_failure" etc. I'll attach the dumb files etc. I'd appreciate it if anyone had any suggestions.

A:BSOD even after reinstalling windows.

Drivers not installed: PCI Simple Communications Controller PCI\VEN_8086&DEV_8C3A&SUBSYS_1C3A1458&REV_04\3&11583659&0&B0 The drivers for this device are not installed.
SM Bus Controller PCI\VEN_8086&DEV_8C22&SUBSYS_50011458&REV_05\3&11583659&0&FB The drivers for this device are not installed.

Only 56 Windows Updates installed. Get them all please.
Update your wireless drivers. Does the issue occur in Safe Mode?
What GPU drivers are you using? If the latest, try rolling back to an earlier version, like 4-6 months earlier, and vice versa.
Fill in your System Specs.


Code:
ucgnstax.sys Wed Aug 5 15:59:46 2009 (4A799052)
Ralink 802.11n Wireless Adapter Driver
http://www.carrona.org/drivers/driver.php?id=ucgnstax.sys

e1i63x64.sys Wed Mar 20 08:37:29 2013 (51496739)
Intel(R) Gigabit Adapter
http://www.carrona.org/drivers/driver.php?id=e1i63x64.sys

intelppm.sys Thu Aug 22 10:46:35 2013 (5215CFEB)
Intel Processor driver
http://www.carrona.org/drivers/driver.php?id=intelppm.sys

dump_storahci.sys Thu Aug 22 13:40:39 2013 (5215F8B7)
driver created to provide disk access during crash dump file generation
http://www.carrona.org/drivers/driver.php?id=dump_storahci.sys

AMDACPKSL.SYS Sun Jun 22 04:31:43 2014 (53A6400F)
included in the AMD/ATI Catalyst WDM drivers package
http://www.carrona.org/drivers/driver.php?id=AMDACPKSL.SYS

AtihdWB6.sys Sun Jun 22 04:32:00 2014 (53A64020)
AMD High Definition Audio Function Driver
http://www.carrona.org/drivers/driver.php?id=AtihdWB6.sys

atikmpag.sys Fri Nov 21 03:08:54 2014 (546E9EB6)
ATI Video driver (remove the Catalyst Control Center and only install the Display Driver)
http://www.carrona.org/drivers/driver.php?id=atikmpag.sys

atikmdag.sys Fri Nov 21 03:30:27 2014 (546EA3C3)
ATI Video driver (remove the Catalyst Control Center and only install the Display Driver)
http://www.carrona.org/drivers/driver.php?id=atikmdag.sys

Debug session time: Tue Feb 10 16:28:12.092 2015 (UTC + 1:00)
Loading Dump File [C:\Users\Mihael\SysnativeBSODApps\021115-4375-01.dmp]
Built by: 9600.16452.amd64fre.winblue_gdr.131030-1505
System Uptime: 0 days 0:51:28.748
*** WARNING: Unable to verify timestamp for atikmpag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmpag.sys
Probably caused by : dxgmms1.sys ( dxgmms1!VidSchiProcessIsrCompletedPacket+2b5 )
BugCheck 3D, {fffff8037863fe30, 0, 0, fffff8000159dce5}
BugCheck Info: INTERRUPT_EXCEPTION_NOT_HANDLED (3d)
Bugcheck code 0000003D
Arguments:
Arg1: fffff8037863fe30
Arg2: 0000000000000000
Arg3: 0000000000000000
Arg4: fffff8000159dce5
BUGCHECK_STR: 0x3D
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCKET_ID: 0x3D_dxgmms1!VidSchiProcessIsrCompletedPacket
MaxSpeed: 3400
CurrentSpeed: 3392
BiosVersion = F5
BiosReleaseDate = 08/14/2013
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = Z87-D3HP
??????????????????????????????????????????????????????????????????????????????????????``
Debug session time: Tue Feb 10 15:32:55.088 2015 (UTC + 1:00)
Loading Dump File [C:\Users\Mihael\SysnativeBSODApps\021015-7421-01.dmp]
Built by: 9600.16384.amd64fre.winblue_rtm.130821-1623
System Uptime: 0 days 1:09:14.744
Probably caused by : ntkrnlmp.exe ( nt!KeReleaseSemaphoreEx+60e )
BugCheck 3B, {c0000005, fffff8035a4dd4ce, ffffd00022db3b90, 0}
BugCheck Info: SYSTEM_SERVICE_EXCEPTION (3b)
Bugcheck code 0000003B
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff8035a4dd4ce, Address of the instruction which caused the bugcheck
Arg3: ffffd00022db3b90, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.
BUGCHECK_STR: 0x3B
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: svchost.exe
FAILURE_BUCKET_ID: 0x3B_nt!KeReleaseSemaphoreEx
MaxSpeed: 3400
CurrentSpeed: 3392
Bi... Read more

http://www.eightforums.com/bsod-crashes-debugging/61413-bsod-even-after-reinstalling-windows.html
Relevancy 52.46%

I bought an Alienware laptop recently and replaced the hard drive with a SSD Samsung EVO TB SSD I think it had BSOD once on the first hard drive but several time on the new SSD It usually have BSOD KMODE EXCEPTION NOT HANDLED UNEXPECTED KMODE EXCEPTION NOT HANDLED after 13. even reinstalling 8.1 on Alienware BSOD Windows from ntoskrnl exe A I've tried sfc scannow and there wasn't anything wrong I've tried Dell's full system scan and all the ram CPU SSD GPU and everything passed the test and working fine but I still keep getting BSOD from ntoskrnl KMODE I've also BSOD even after reinstalling Windows 8.1 on Alienware 13. tried re-installed Windows from the OS drive Dell's gave and still get BSOD KMODE I've tried re-installed on quot Update and Recovery quot from Windows 's PC setting and still getting the same BSOD and ndis sys or bwcw x I suspect this was clashing with Killer Bandwidth After re-installing and resetting I've used AlienRespawn to reset everything this time I get 'IRQL NOT LESS OR EQUAL quot from ntoskrnl exe and hal dll This is probably when I was downloading something using torrent At first the BSOD usually came when I was installing stuff into laptop but usually happens randomly sometime even when I BSOD even after reinstalling Windows 8.1 on Alienware 13. was doing nothing I've tried using automatic troubleshooting but it said there was nothing wrong I have the lastest update from Windows and lastest SSD firmware from Samsung All of my system test passed but I still get BSOD I didn't even touch on CPU for overclocking I have no idea what is going on I really need help on this one System specs HTML Code http drv ms I GAyE Minidump HTML Code http drv ms iOFn BlueScreenView WhoCrashed's Analysis Crash Dump Analysis Crash dump directory C Windows Minidump Crash dumps are enabled on your computer On Fri AM GMT your computer crashed crash dump file C Windows Minidump - - dmp This was probably caused by the following module ntoskrnl exe nt x A Bugcheck code xA xB xD x xFFFFF B C Error IRQL NOT LESS OR EQUAL file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System Bug check description This indicates that Microsoft Windows or a kernel-mode driver accessed paged memory at DISPATCH LEVEL or above This appears to be a typical software driver bug and is not likely to be caused by a hardware problem The crash took place in the Windows kernel Possibly this problem is caused by another driver that cannot be identified at this time On Fri AM GMT your computer crashed crash dump file C Windows memory dmp This was probably caused by the following module hal dll hal HalPerformEndOfInterrupt x F Bugcheck code xA xB xD x xFFFFF B C Error IRQL NOT LESS OR EQUAL file path C Windows system hal dll product Microsoft Windows Operating System company Microsoft Corporation description Hardware Abstraction Layer DLL Bug check description This indicates that Microsoft Windows or a kernel-mode driver accessed paged memory at DISPATCH LEVEL or above This appears to be a typical software driver bug and is not likely to be caused by a hardware problem The crash took place in a standard Microsoft module Your system configuration may be incorrect Possibly this problem is caused by another driver on your system that cannot be identified at this time

A:BSOD even after reinstalling Windows 8.1 on Alienware 13.

Update Realtek driver.

Also, in the first dump file, the Killer Network Manger is blamed. This has caused problems in the past. I would suggest you to follow the below quote (Follow Note 2 first. If it does not work, follow note 1) -
(Thanks Usasma!)At times the Killer Network Manager may cause BSOD problems:

NOTE1:Link thanks to blueelvis (15Oct2014): https://forum-en.msi.com/index.php?topic=178064.0 This is a method for removing all the network software and only installing the driver. Perfect for those issues that can't be resolved any other way!

NOTE2: See this link first: BSOD while playing on msi gt70 dragon edition 2 (thanks to kaelaan) It appears that the Killer Service problem was solved with the latest release of the Qualcomm versions of the drivers (so try updating to a version dated from later in 2014).
The Qualcomm Atheros Killer Service/KillerNetManager is known to cause BSOD's. Please follow the workaround instructions here:

First, open the Run dialog (Win + R keys) and type in "services.msc" (without the quotes) and press Enter
Scroll down and locate the "Qualcomm Atheros Killer Service" and right click on it. Select "Stop"
Right click on it again and this time select "Properties"
In the dropdown box for "Startup type", select "Disabled", then click on the "OK" button at the bottom of the window

Next, open Task Manager (right click on TaskBar and select "Task Manager")
Click on the "More details" dropdown (if present)
Click on the "Startup" tab
Scroll down and locate the "KillerNetManager" entry, right click on it and select "Disable"
There may also be an Install Shield (with the Killer gaming K next to it), if so Right click on it and select "Disable"
Finally, restart the system in order for the changes to take affect.
At times the Killer Network Manager will continue to load. If so, it's usually listed in the MSINFO32...Software Environment...Startup Programs section. If it is, please try this:

It may be that the instructions aren't stopping everything.
In some cases, there's a program running out of the Program Files/Program Files (x86) directory.
"c:\program files\qualcomm atheros\killer network manager\killer~1.exe" (NOTE: killer~1.exe is most likely killernetmanager.exe)
In other cases, there's a program running out of c:\windows\installer\{Long string of letters, numbers, and dashes}\networkmanager.exe_130c27d738f34c89bddf21bcfd74b56d.exe (the long string of letters and numbers may change)

Here's some things to try
1) Please see if there are any entries in the Startup tab of Task Manager that are related to Qualcomm/Atheros/Killer Network Manager (and NOT the card itself) and disable them (please let us know what you find) Be careful as the wrong selection can disable the network card.
2) Check in "msconfig" for any entries that aren't in the Startup tab of Task Manager. Let us know if you find any Qualcomm/Atheros/Killer entries there (we'll disable them differently if they are there).
3) Locate the "c:\program files\qualcomm atheros\killer network manager\killer~1.exe" and rename the .exe to .BAD (the killer~1 is actually a filename that starts with killer and ends with .exe) There will be an error in event viewer, but it'll stop the bugger from loading.
4) Locate the "c:\windows\installer\{Long string of letters, numbers, and dashes}\networkmanager.exe_130c27d738f34c89bddf21bcfd74b56d.exe" entry and rename the last .exe to .BAD (the long string of letters and numbers may change)

Just FYI - here are the MSI workaround instructions: MSI USA - Online Technical Support FAQ


Code:
MBfilt64.sys Fri Jul 31 05:40:32 2009 (4A7267B0)
Realtek HiDefinition Audio driver (file labelled as Creative Audio Driver) - Was found in the latest Win8 version available from Realtek on 07Sep2013
http://www.carrona.org/drivers/driver.php?id=... Read more

http://www.eightforums.com/bsod-crashes-debugging/63316-bsod-even-after-reinstalling-windows-8-1-alienware-13-a.html
Relevancy 52.46%

I've been getting alot of random restarts even after changing motherboard and PSU. I think it might be a driver or software issue but I don't know what exactly.Attachment 53622

4960K
MSI Z97 G55 SLI
16GB Corsair 1600mhz ram
Mushkin Chronos 120GB(Boot)
4 - 320GB Western Digital HDD's
SB ZR sound card
MSI 290X Lightning

A:BSOD after reinstalling windows 8.1 and MB drivers.

Only 67 Windows Updates installed. Most systems have 80 to 100 or more (I've seen as high as 132). Please visit Windows Update and get ALL available updates (it may take several trips to get them all).

Don't worry about the specific number, it's just important that you have checked and installed any updates that were available (and didn't experience any errors).

You have 5 hard drives. What is the make/model/wattage and age of your Power Supply?

Out of 8 memory dumps there were 7 different BSOD error codes. The differing error codes are usually symptomatic of a lower level problem within the system. They are usually caused by one of these things:
- borked (broken) hardware (several different procedures used to isolate the problem device)
- BIOS issues (check for updates at the motherboard manufacturer's website)
- overclocking/overheating - You'll know if you're overclocking or not. If uncertain we can suggest things to check.
- dirt/dust/hair/fur/crud inside the case. Blow out the case/vents with canned air (DO NOT use an air compressor or vacuum as they can cause damage to the system)
- missing Windows Updates
- compatibility issues (3rd party hardware/drivers), older systems, or even pirated systems
- low-level driver problems
- or even malware (scanned for when we ask for hardware diagnostics from Initial Hardware Diagnostics or Hardware Diagnostics ).

You can get a head start on the hardware diagnostics if you'd like - they are located here: Hardware Diagnostics

Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable! :

LGBusEnum.sys Mon Nov 23 20:36:48 2009 (4B0B38B0)
Logitech Keyboard
http://www.carrona.org/drivers/driver.php?id=LGBusEnum.sys

LGVirHid.sys Mon Nov 23 20:36:48 2009 (4B0B38B0)
Logitech Gamepanel Virtual HID Device Driver
http://www.carrona.org/drivers/driver.php?id=LGVirHid.sys

Please note the drivers below that date from before the release of Windows 8.1 (17 Oct 2013) - check to see that each and every one is compatible w/Windows 8.1 (at the manufacturer's website). If not, you must either remove the device and it's software - or locate a Windows 8.1 compatible update on the web. Removing some drivers may make the system unstable - so if you're unable to find updates, post back for info on the one's that can/cannot be safely removed.

The drivers that are struckout don't have updates available (AFAIK).
DO NOT delete them, just leave them be.

If all of this (including the hardware diagnostics) doesn't stop the BSOD's, please run Driver Verifier according to these instructions: Driver Verifier Settings

Analysis:
The following is for informational purposes only.

Code:
**************************Mon Nov 10 16:06:31.160 2014 (UTC - 5:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\111014-11421-01.dmp]
Windows 8 Kernel Version 9600 MP (4 procs) Free x64
Built by: 9600.17238.amd64fre.winblue_gdr.140723-2018
System Uptime:0 days 0:14:54.854
Probably caused by :ntkrnlmp.exe ( nt!NtWaitForWorkViaWorkerFactory+948 )
BugCheck A, {40000000008, 2, 1, fffff803292ae9f8}
BugCheck Info: IRQL_NOT_LESS_OR_EQUAL (a)
Arguments:
Arg1: 0000040000000008, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff803292ae9f8, address which referenced memory
BUGCHECK_STR: AV
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: svchost.exe
FAILURE_BUCKET_ID: AV_nt!NtWaitForWorkViaWorkerFactory
CPUID: "Intel(R) Core(TM) i5-4690K CPU @ 3.50GHz"
MaxSpeed: 3500
CurrentSpeed: 3500
BIOS Version ... Read more

http://www.eightforums.com/bsod-crashes-debugging/56833-bsod-after-reinstalling-windows-8-1-mb-drivers.html
Relevancy 52.46%

I get seemingly random BSOD from a fresh install of Windows 7 64 bit. I have an Intel i7-3770S, an Asus Sabertooth z77, an nVidia Geforce 770, 16GB of Corsair Vengeance DDR3, and a Corsair 750W PSU.

I have uninstalled Eset NOD32 Antivirus, AI Suite II, Daemon Tools (plus sptd.sys) and I ran driver verifier. It told me Aupio.sys was causing the crashing so I uninstalled AI Suite II. I ran the tool to collect all the .dmp files. I tried to analyze them myself but it's seriously something different almost every time. I'll post it and then try checking my hard drive for errors. Thanks so much for reading.

A:BSOD persists after reinstalling Windows.

Code:
Host Name: SPEC-WINDOWS
OS Name: Microsoft Windows 7 Ultimate
OS Version: 6.1.7601 Service Pack 1 Build 7601
OS Manufacturer: Microsoft Corporation
OS Configuration: Standalone Workstation
OS Build Type: Multiprocessor Free
Registered Owner: spec
Registered Organization:
Product ID: 00426-OEM-8992662-00173
Counterfeit installations such as yours contains heavily modified code that causes the installation to behave it unexpected ways. Analysing BSOD's and determining their causes on these sorts of installations is very unreliable.

My recommendation is to start with a clean slate, and install a genuine version of Windows. This will minimise the problems you are experiencing, and make subsequent diagnosis of BSOD's far more reliable. Once you are running a genuine Windows installation, and are still experiencing BSOD's, we will be happy to help you solve them

http://www.sevenforums.com/bsod-help-support/329478-bsod-persists-after-reinstalling-windows.html
Relevancy 52.46%

Hello I had a very stable Windows setup that had one issue when I tried to wake it from sleep it would instead POST I could see the BIOS loading but then somehow restore all open programs from before I put it to sleep I realized this issue was overclock-dependent and experimented with the clock speed and finally found the limit above reinstalling BSOD since Windows. trouble which this issue would occur GHz I then raised the clock up to GHz tested the issue and this time instead of booting up my hard drive corrupted and Windows failed to boot BSOD trouble since reinstalling Windows. I reinstalled Windows from the disk as a fresh installation however since then my system has BSOD trouble since reinstalling Windows. been much less stable than previously and I've been dealing with occasional BSODs Some of them seem to be overclock dependent the BIOS settings which had previously given me spectacular stability running Prime all day at GHz were no longer stable An example of this is in the last crash dump from I was running Dragon Age and a mod error caused the BSOD I reverted the BIOS settings to default and now instead of causing a BSOD the game crashed to desktop which enabled me to find the problem troubleshoot it and fix it My latest BSOD came with the BIOS as default settings the computer crashed and restarted when I was waking the computer from sleep At this point I'm not sure how to further troubleshoot the issues I've used the information collector recommended on this forum and have attached the zip to this post My only other lead is that Windows couldn't find my onboard audio driver so I downloaded it from a Gigabyte motherboard support page and installed it Afterward it kept popping up every time I booted the computer to tell me it wasn't compatible with my version of Windows so I uninstalled it and deleted the driver file via Device Manager at which point Windows auto-installed a default audio driver which seems to work fine I'm not sure if it's relevant because I fixed this on but I'm disclosing in case it could possibly be involved in the BSODs since then Could anyone suggest troubleshooting for my system Thanks

A:BSOD trouble since reinstalling Windows.

Alright, first things first, reset CPU to stock please while we are troubleshooting your system. Update all the drivers in red (if possible). Update AMD High Definition Audio Function Driver Driver Reference Table - AtihdWB6.sys
as it seems to be giving you problems. The cause seems to be ks.sys which is the Kernel CSA Library which handles the Streaming in other words related to the Audio/Video things

Code:
e1y60x64.sys Tue Feb 15 21:21:13 2011 (4D5AE039)
Intel(R) 82567LM Gigabit Network Connection
http://www.carrona.org/drivers/driver.php?id=e1y60x64.sys

mv_process.sys Tue Feb 22 10:22:20 2011 (4D63804C)
Marvell Semicondutor process notification driver. Most often associated with Marvell Storage Controller drivers
http://www.carrona.org/drivers/driver.php?id=mv_process.sys

L6UX264.sys Mon Mar 26 21:39:35 2012 (4F70C5F7)
GuitarPort Audio Device Driver
http://www.carrona.org/drivers/driver.php?id=L6UX264.sys

ASACPI.sys Fri Nov 2 02:54:34 2012 (509327DA)
Asus ATK0110 ACPI Utility (a known BSOD maker in Win7 and Win8). Also a part of many Asus utilities (Win8 versions available from Windows Update as an Optional Update - but check Asus first!)
http://www.carrona.org/drivers/driver.php?id=ASACPI.sys

RTCore64.sys Mon Mar 11 06:32:06 2013 (513D6C56)
RivaTuner/EVGA Precision/MSI Afterburner (known BSOD issues w/Win7)
http://www.carrona.org/drivers/driver.php?id=RTCore64.sys

klpd.sys Fri Apr 12 13:34:45 2013 (5167F155)
Kaspersky antivirus driver
http://www.carrona.org/drivers/driver.php?id=klpd.sys

mv91cons.sys Fri Jun 21 08:18:21 2013 (51C3F02D)
Marvell 91xx Confige Device Driver for 6G SATA Controller
http://www.carrona.org/drivers/driver.php?id=mv91cons.sys

klim6.sys Thu Jul 11 09:53:56 2013 (51DE6494)
Kaspersky Lab Intermediate Network Driver
http://www.carrona.org/drivers/driver.php?id=klim6.sys

klmouflt.sys Thu Aug 8 15:09:08 2013 (52039874)
KLMOUFLT Mouse Device Filter [fre_wlh_x86] (Kaspersky)
http://www.carrona.org/drivers/driver.php?id=klmouflt.sys

intelppm.sys Thu Aug 22 10:46:35 2013 (5215CFEB)
Intel Processor driver
http://www.carrona.org/drivers/driver.php?id=intelppm.sys

dump_storahci.sys Thu Aug 22 13:40:39 2013 (5215F8B7)
driver created to provide disk access during crash dump file generation
http://www.carrona.org/drivers/driver.php?id=dump_storahci.sys

NETwew00.sys Thu Aug 22 23:20:34 2013 (521680A2)
Intel? Wireless WiFi Link Driver - Intel? Wireless WiFi Link Adapter (Windows 8 only AFAIK).
http://www.carrona.org/drivers/driver.php?id=NETwew00.sys

bcbtums.sys Thu Oct 17 22:45:30 2013 (52604C6A)
Broadcom Bluetooth Firmware Download Filter driver from Broadcom Corporation.
http://www.carrona.org/drivers/driver.php?id=bcbtums.sys

kl1.sys Fri Oct 18 11:18:22 2013 (5260FCDE)
Kaspersky Unified Driver
http://www.carrona.org/drivers/driver.php?id=kl1.sys

kneps.sys Thu Oct 31 14:45:52 2013 (52725F10)
Kaspersky KNEPS Power driver
http://www.carrona.org/drivers/driver.php?id=kneps.sys

klkbdflt.sys Fri Dec 27 14:35:56 2013 (52BD823C)
Kaspersky KLKBDFLT Keyboard Device Filter
http://www.carrona.org/drivers/driver.php?id=klkbdflt.sys

klwfp.sys Wed Feb 5 14:33:44 2014 (52F23DB8)

klwfp.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

klflt.sys Sun Mar 2 00:02:12 2014 (531266F4)
Kaspersky driver - unable to locate a name for it.
http://www.carrona.org/drivers/driver.php?id=klflt.sys

klif.sys Thu Mar 6 17:38:02 2014 (5318A46A)
Klif Mini-Filter fre_wnet_x86 (Kaspersky)
http://www.carrona.org/drivers/driver.php?id=klif.sys

mwac.sys Wed Jun 18 04:07:00 2014 (53A0F444)
Malwarebytes Web Access Control
http://www.carrona.org/drivers/driver.php?id=mwac.sys

AMDACPKSL.SYS Sun Jun 22 04:31:43 2014 (53A6400F)
included in the AMD/ATI Catalyst WDM drivers package
http://www.carrona.org/drivers/driver.php?id=AMDACPKSL.SYS

AtihdWB6.sys ... Read more

http://www.eightforums.com/bsod-crashes-debugging/57503-bsod-trouble-since-reinstalling-windows.html
Relevancy 52.03%

Hey,

I would be thankful if you guys could help me deal with BSOD. Normally I was getting irql_not_less_or_equal, but it was not limited to this single one.

By saying it is super random I mean I can be away from the computer and it may happen, or during watching a movie or sth. I did fresh reinstall of W7 Pro few days ago and irql_... happened when I tried to connect to a wifi network.

It's been happening for more than a year, usually like once a week, but sometimes everyday.
I remember I might have updated BIOS settings and that's when it either started or increased it's frequency. Regardless, I would love to hear some advice on this one guys.

Cheers,
Matt

A:BSOD super random; after reinstalling Windows 7

Welcome
Unfortunately, even though, you had many BSODs you only gave us one dump. Each dump gives a little clue as to the cause. So without additional reports, I must rely on the one given. It indicates a driver, update driver to solve problem

Netw5v64.sys file descriptionProductname:Intel? Wireless WiFi Link Adapter Description:Intel? Wireless WiFi Link Driver Company:Intel Corporation

http://www.sevenforums.com/bsod-help-support/249440-bsod-super-random-after-reinstalling-windows-7-a.html
Relevancy 52.03%

Hey. I'm getting a BSOD at completely random times, and can't figure out any reason why it happens. I even reinstalled Windows, hoping it would fix it, but no dice. Hoping someone here would be able to help me with it, thanks in advance!

A:BSOD at random points, even after reinstalling windows.

Hi Regien and welcome to SF

Firstly can you please update to Windows 7 Service Pack 1 and ensure all windows updates are installed.

Your AVG Anti-virus should be uninstalled.

Please install Microsoft Security Essentials:

Recommended from a strict BSOD perspective, compatibility & stability compared to other antiviruses/internet security software.
It is free and lightweight:-

http://windows.microsoft.com/en-US/w...tials-download

Run Chkdsk /f /r to detect and resolve any file system corruption:







Quote:
Click on the Start > Type in search cmd
Right click cmd at top and Run as Administrator
At the promt type Chkdsk /f /r (note the space between chkdsk and /f/r)



http://www.sevenforums.com/tutorials/433-disk-check.html


Also please perform a System File Check:







Quote:
Click on the Start > Type in search cmd
Right click cmd at top and Run as Administrator
Type SFC /scannow at the prompt


http://www.sevenforums.com/tutorials/139810-sfc-scannow-run-command-prompt-boot.html

Please post back any results.

Cheers

Dave

http://www.sevenforums.com/bsod-help-support/276914-bsod-random-points-even-after-reinstalling-windows.html
Relevancy 52.03%

So I finally got my hands on a Ultimate bits OS as my father mistakenly bought a bits H Premium OS Basically yesterday I reinstalled it I installed all the motherboard drivers which came with the gygabite CD and then downloaded the ATI drivers Installed STALKER played it for half an hour and then I turned it off thinking everything was alright Then today hours later I turn it on and I find after a while it had enter repairing mode because it couldn't initiate Windows quot WTF quot I thought as yesterday it didn't crash or BSOD So it has obviously something to do with cold boot It quot repaired quot the PC and when it restarted I found out that AVG no longer worked and the ATI drivers seemed to have been nullified Had to Windows hours 7 bits BSOD after reinstalling 8 64 reinstall them again One more restart and it works fine I'll just have to download MSI instead of AVG Ok before we get into hardware stuff I'll remind you that I've done several Memtest and OCCT tests with this machine Of course after it started working fine after several BSODS in every single cold boot Temperature is alright never going further than degrees C There is no OC RAM is at v as specified by GSKILL CPU is at ghz and the ATI HD XXX has been Underclocked as it came from factory with when normal ones come with Hard drive is perfect Checked it with the WD tools and no error came up All PASS Im attaching the dump to let you see what might have caused this I mean come on one day BSOD 8 hours after reinstalling Windows 7 64 bits just after doing a clean reinstall BSODs Like that Thanks for help PD The previous Windows install DID BSOD after every single cold boot but after a couple of BSOD's it started working fine though sometimes it seemed files quot vanished quot or were no longer quot there quot

A:BSOD 8 hours after reinstalling Windows 7 64 bits

Hello ArgentineBoy.

► We need more info, as per Blue Screen of Death (BSOD) Posting Instructions.

► Install Service Pack 1

Code:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
► It is your Display Driver.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 50, {fffffa803074f828, 0, fffff88004938d90, 2}

Unable to load image \SystemRoot\system32\DRIVERS\atikmdag.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys

Could not read faulting driver name
Probably caused by : atikmdag.sys ( atikmdag+67d90 )

Followup: MachineOwner
---------
Uninstall it using Driver Fusion and then download and install the latest one.

► Check DirectX
Diagnosing basic problems with DirectX

► Update Realtek High Definition Audio Function Driver from Realtek

Code:
kd> lmvm RTKVHD64
start end module name
fffff880`06abb000 fffff880`06cd8300 RTKVHD64 T (no symbols)
Loaded symbol image file: RTKVHD64.sys
Image path: \SystemRoot\system32\drivers\RTKVHD64.sys
Image name: RTKVHD64.sys
Timestamp: Tue Dec 08 15:50:05 2009 (4B1E2855)
CheckSum: 0021EFFE
ImageSize: 0021D300
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
► Update Atheros network adapter driver from ATHEROS drivers for Microsoft Windows (Atheros?????)

Code:
kd> lmvm athrx
start end module name
fffff880`04256000 fffff880`043ae000 athrx T (no symbols)
Loaded symbol image file: athrx.sys
Image path: \SystemRoot\system32\DRIVERS\athrx.sys
Image name: athrx.sys
Timestamp: Tue Jun 09 23:36:49 2009 (4A2EA4B9)
CheckSum: 0015FE99
ImageSize: 00158000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
► Uninstall AVG, use Microsoft Security Essentials - Free Antivirus for Windows.

Let us know the results.

http://www.sevenforums.com/bsod-help-support/256123-bsod-8-hours-after-reinstalling-windows-7-64-bits.html
Relevancy 52.03%

Hey guys i recently reinstalled windows 7 on my computer and it seemed like everything worked fine but sometimes the computer will get stuck at starting windows. then sometimes it gets stuck with just a small line in the screen. If i'm lucky it will make it all the way to normal boot. but as i click on google chrome it instantly crashes. As of right now i'm using Safe mode with networking to type this and i'm on google chrome everything works flawlessly in safe mode i have the minidump i am going to post it on here. Please help me i'm willing to even donate $5 to anyone that can help me. As i am a college student and i need my computer for my classes. Thank you heres the minidump i will include 3 Attachment 321761 Thank you everyone and God Bless!

A:BSOD after reinstalling windows 7 Minidump included!

We need more information to analyze your logs. Follow Blue Screen of Death (BSOD) Posting Instructions, let the tool run until it has completely finished and then upload the new logs.

http://www.sevenforums.com/bsod-help-support/334802-bsod-after-reinstalling-windows-7-minidump-included.html
Relevancy 52.03%

Alright i'm very new to this forum as i've been looking for an answer to my problem. So sorry if i seem very n00bish at this.

Recently last week i had installed a new motherboard and psu onto my computer
(as both died somehow :S)
So i reformatted windows etc. and continuously last week i would get BSODs.
I used BlueScreenView to see what was causing it and it said ntoskrnl.exe was the problem.

So i figured something must've gone wrong with the installation, so i reformatted (well deleted this time the partition), and reinstalled windows again.

I'm still getting the BSOD however, and it is very frustrating.

I know people would normally upload their dmp file but i'm not exactly sure how to get that.

Any help would be greatly appreciated.
 

https://forums.techguy.org/threads/ntoskrnl-exe-bsod-still-occuring-after-reinstalling-windows.980607/
Relevancy 52.03%

I keep getting BSODS I've reinstalled windows several times, used the windows memory diagnostic tool and chkdsk, but no errors.

I've even switched motherboards(because I sometimes lost signal to monitor+usb devices, sometimes got RAM errors while using windows memory diagnostic and even disk read errors allthough chkdsk says everything is fine s:..) to fix the bsods.. but now, after a week with the new mobo I get BSODs again..

Specs are
Win7 Ultimate x64 Retail
AMD Phenom II x4 965 BE @ 3,4GHz
EVGA GTX 570 SCE
10 GB of Ram(2x2GB @ 1333mhz, 1x 4GB @ 1333mhz, 1x 2GB @ 1666mhz)
MSI 870-C45

A:BSOD even after reinstalling windows and replacing motherboard.

Please start by running these free diagnostics to rule out the most common problems: http://www.carrona.org/initdiag.html
Also, as you've related memory problems, also run the free Prime95 program on this page: Additional Hardware Diagnostics

SP1 isn't installed, please do the following:





Quote:
Installing Windows 7 Service Pack 1
1. Visit the PC manufacturer's website and update ALL drivers. DO NOT use Windows Update or the "Update drivers" function of Device Manager.
2. Check Device Manager for any unknown/disabled devices - if there are unknown/disabled devices, fix them with the latest drivers from the device manufacturer's website (not the PC Manufacturer)
3. Visit Windows Update and get all updates (may take repeated visits)
4. Visit Windows Update and get Service Pack 1 (usually under Important Updates). Read these notes for installing SP1: Steps to follow before you install Windows 7 SP1 and Windows Server 2008 R2 SP1 from the Microsoft Download Center
NOTE: For Vista, read these notes:





Quote:
Read these notes for installing Vista SP1: Learn how to install Windows Vista Service Pack 1 (SP1)
Read these notes for installing Vista SP2: Learn how to install Windows Vista Service Pack 2 (SP2)


5. Visit Windows Update and get any other available updates. May take repeated visits, but keep it up until you get several "Windows is updated" results.
If you're having difficulties with installing a Service Pack, please use the SURTool from this link: What is the System Update Readiness Tool?
Also, check out this troubleshooting link from Microsoft: Troubleshoot problems installing Service Pack 1 (SP1) for Windows 7 and Windows Server 2008 R2

I have had limited success in installing updates/Service Packs when using a "clean boot". I suspect that I'm just bypassing the problem - and that it can come back to bite me in the butt later on.


Do you have a USB sound device? If so, try uninstalling it to see if the BSOD's stop (just a hunch on my part).

If the above steps don't stop the BSOD's, please zip up and upload any new memory dumps with your next post - and we'll see what we can figure out from there.

The following info is just FYI, I've already addressed the issues that I saw in the above paragraphs

- Further info on BSOD error messages available at: http://www.carrona.org/bsodindx.html
- Info on how to troubleshoot BSOD's (DRAFT): http://www.carrona.org/userbsod.html
- How I do it: http://www.carrona.org/howidoit.html

3RD PARTY DRIVERS PRESENT IN THE DUMP FILES

Code:

Rt64win7.sys Fri Jun 10 02:33:15 2011 (4DF1BAAB)
amdxata.sys Tue May 19 13:56:59 2009 (4A12F2EB)
cpuz135_x64.sys Wed Jan 19 11:42:06 2011 (4D37145E)
nvlddmkm.sys Thu Feb 09 21:02:58 2012 (4F347AD2)
speedfan.sys Fri Mar 18 12:08:46 2011 (4D83838E)

http://www.carrona.org/drivers/driver.php?id=Rt64win7.sys
http://www.carrona.org/drivers/driver.php?id=amdxata.sys
http://www.carrona.org/drivers/driver.php?id=cpuz135_x64.sys
http://www.carrona.org/drivers/driver.php?id=nvlddmkm.sys
http://www.carrona.org/drivers/driver.php?id=speedfan.sys

BSOD BUGCHECK SUMMARY


Code:

Loading Dump File [C:\Users\John\_jcgriff2_\dbug\__Kernel__\071612-24648-01.dmp]
Built by: 7600.17017.amd64fre.win7_gdr.120503-2030
Debug session time: Mon Jul 16 11:10:43.253 2012 (UTC - 4:00)
System Uptime: 4 days 13:54:23.597
BugCheck 109, {a3a039d8a0bde4e9, 0, 3c09be51f0f8d845, 101}
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
BUGCHECK_STR: 0x109
PROCESS_NAME: System
Bugcheck code 00000109
Arguments a3a039d8`a0bde4e9 00000000`00000000 3c09be51`f0f8d845 00000000`00000101
BiosVersion = V1.15
BiosReleaseDate = 03/04/2011
SystemM... Read more

http://www.sevenforums.com/bsod-help-support/240869-bsod-even-after-reinstalling-windows-replacing-motherboard.html
Relevancy 52.03%

Hi I recently reinstalled windows to my laptop 116) BSOD after windows (error drivers reinstalling 7 Dell N after realizing that windows was not compatible with my machine Now BSOD (error 116) after reinstalling windows 7 drivers I'm having problems reinstalling my drivers for my graphics card The laptop has graphics cards Every time after I installed the BSOD (error 116) after reinstalling windows 7 drivers driver for AMD HD m it reboots into the quot windows is starting quot screen and goes into the BSOD with the error code and cause by the atikmpag sys driver I really need BSOD (error 116) after reinstalling windows 7 drivers help as I have been at this for a few days trying to fix it Methods I have tried - manually installing the driver through Device manager - full clean with Display Driver Uninstaller and reinstalling -direct download from the AMD website on their latest installer -download drivers from Dell Drivers page I have also tried this solution thinking it would help but still no luck I'm not sure if I did it correctly Fix atikmpag sys atikmdag sys blue screen errors BSOD I'm at a stump Please advice me

A:BSOD (error 116) after reinstalling windows 7 drivers

Still need help on this

http://www.sevenforums.com/bsod-help-support/377792-bsod-error-116-after-reinstalling-windows-7-drivers.html
Relevancy 52.03%

Well it all started while ago. It seemes that one of the reasons might be ntoskrnl.exe
I just reinstalled windows, and when I was watching a youtube video, my computer just crashed - BSOD. Maybe I need to reinstall a new soundcard driver, but I am not sure what is my soundcard.
It also seems my keyboard is messed up after reinstall.

A lot of the time, well before the reinstall it said something about BAD_POOL_HEADER and win32skys

Windows 7 Home Premium 64bit

System specs
Raedon HD 6670 1GB
AMD Athlon II x4 640
Mainboard G41M-P28
PSU seems to be ATX 12V v2,2 EPS 12V
480 Watt
Motherboard seems to be A780LM-M

I am pretty noob at all of this... So my apologizes and I hope you are patient.

Also here is a screenshot

A:Random BSOD-s. Just happened again after reinstalling windows.

Mainboard is another name for the Motherboard so with a AMD CPU this is not your mainboard>>Mainboard G41M-P28<< As that is a Intel socket 775 G41 chipset board.

You have a ECS A780LM-M > ECS Web Site

BSOD is blamed on > NTFS_FILE_SYSTEM (24)

Make sure you have the latest chipset drivers form the link to ECS above.

Test the hard drive with the drive manufacturers diagnostic utility.

Code:
Opened log file 'C:\Users\Owner\_jcgriff2_\dbug\__Kernel__\_99-dbug.txt'

Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Owner\_jcgriff2_\dbug\__Kernel__\042512-26020-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\mss*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Machine Name:
Kernel base = 0xfffff800`02804000 PsLoadedModuleList = 0xfffff800`02a41e50
Debug session time: Wed Apr 25 04:14:01.999 2012 (UTC - 4:00)
System Uptime: 0 days 0:30:29.435
Loading Kernel Symbols
...............................................................
................................................................
.............
Loading User Symbols
Loading unloaded module list
.......
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 24, {1904fb, fffff88002f858d8, fffff88002f85140, fffff880010e85c6}

Probably caused by : Ntfs.sys ( Ntfs!NtfsCommonClose+106 )

Followup: MachineOwner
---------

1: kd> !analyze -v;r;kv;lmtn;lmtsmn;.bugcheck;!sysinfo cpuinfo;!sysinfo machineid; !sysinfo cpuspeed; !sysinfo smbios .logclose;q
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

NTFS_FILE_SYSTEM (24)
If you see NtfsExceptionFilter on the stack then the 2nd and 3rd
parameters are the exception record and context record. Do a .cxr
on the 3rd parameter and then kb to obtain a more informative stack
trace.
Arguments:
Arg1: 00000000001904fb
Arg2: fffff88002f858d8
Arg3: fffff88002f85140
Arg4: fffff880010e85c6

Debugging Details:
------------------
EXCEPTION_RECORD: fffff88002f858d8 -- (.exr 0xfffff88002f858d8)
.exr 0xfffff88002f858d8
ExceptionAddress: fffff880010e85c6 (Ntfs!NtfsCommonClose+0x0000000000000106)
ExceptionCode: c0000005 (Access violation)
ExceptionFlags: 00000000
NumberParameters: 2
Parameter[0]: 0000000000000000
Parameter[1]: ffffffffffffffff
Attempt to read from address ffffffffffffffff

CONTEXT: fffff88002f85140 -- (.cxr 0xfffff88002f85140)
.cxr 0xfffff88002f85140
rax=ffeff8a006ec3610 rbx=fffffa8003f90430 rcx=0000000000000000
rdx=fffff8a006f31b80 rsi=fffff8a006f31b40 rdi=0000000000000009
rip=fffff880010e85c6 rsp=fffff88002f85b10 rbp=fffff80002a195a0
r8=0000000000000000 r9=0000000000000009 r10=0000000000000004
r11=fffff8800109c018 r12=fffffa8004a31180 r13=0000000000000000
r14=0000000000000000 r15=fffff8a006f31c70
iopl=0 nv up ei pl zr na po nc
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010246
Ntfs!NtfsCommonClose+0x106:
fffff880`010e85c6 83785800 cmp dword ptr ... Read more

http://www.sevenforums.com/bsod-help-support/226320-random-bsod-s-just-happened-again-after-reinstalling-windows.html
Relevancy 51.6%

Title says it all really, after I reinstalled windows 7 ultimate, and installed all the drivers, i got the BSOD a few minutes after i finished the audio drivers. Log file is attached (ignore the computer name...), any help would be super appreciated.

Thanks!

A:BSOD 0x0000001e after reinstalling windows and installing drivers

The zip you uploaded does not contain any crash dump.

Follow it: Dump Files - Configure Windows to Create on BSOD
Go to Option Two, Point 2. Download the .reg file and merge it in registry by double clicking it.

Now wait for another BSOD. When it occurred, search the .dmp files manually in the default path: C:\Windows\Minidump or %SystemRoot%\Minidump. See if the crash dump is recorded or not (hopefully it will be recorded).Post it following the Blue Screen of Death (BSOD) Posting Instructions.

Dont run any disc cleanup tool before you upload another zip.

http://www.sevenforums.com/bsod-help-support/371296-bsod-0x0000001e-after-reinstalling-windows-installing-drivers.html
Relevancy 50.74%

I recently reinstalled Windows after my Alienware laptop stopped booting After that I have been getting a crash restart approximately once a day A dialogue BCCode: reinstalling Windows BSOD daily 7, after 9086 approximately box after a recent shutdown said Quote Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode BCP BSOD approximately daily after reinstalling Windows 7, BCCode: 9086 BCP BCP BCP OS Version BSOD approximately daily after reinstalling Windows 7, BCCode: 9086 Service Pack Product Files that help describe the problem C Windows Minidump - - dmp C Users Lopsy AppData Local Temp WER- - sysdata xml Read our privacy statement online Windows Privacy Statement - Microsoft Windows If the online privacy statement is not available please read our privacy statement offline C Windows system en-US erofflps txt The referenced files are attached in dumpfiles zip I've also attached the zip file generated by the program in the quot BSOD - Posting Instructions quot thread Sometimes the computer crashes with a BSOD Other times it crashes with a strange mess of blue and white static I managed to snap a picture of the latter behavior Does anyone have any ideas about how to stop these repeated crashes

http://www.sevenforums.com/bsod-help-support/382713-bsod-approximately-daily-after-reinstalling-windows-7-bccode-9086-a.html
Relevancy 46.44%

Hello guys Problem started quite recently I bought a new computer a month ago and everything was cool until it started giving me MANY BSODs affter one intitial BSOD while playing League Of Legends After a first crash Windows asked during boot playing while BSOD reinstalling Win7 LoL, BSOD when avast!, affected if i want to run a recovery utility and each time I said yes it would BSOD at the end of the scan It would continuously crash until I ignored the recovery options and asked to start as normal This would give me a little bootloop consisting of two or three BSODs and then boot properly This whole thing BSOD while playing LoL, affected avast!, BSOD when reinstalling Win7 happened a few times around five I would say and today avast popped up saying it wouldn't run in background or something I tried resolving the issue but i would go back to a red error state instantly After uninstalling avast rebooting and trying to reinstall I had a nasty series of crashes in the middles of the installation and a huge bootloop with a blue screen each BSOD while playing LoL, affected avast!, BSOD when reinstalling Win7 time I decided to send BSOD while playing LoL, affected avast!, BSOD when reinstalling Win7 this all to hell and restore my computer to a restoration point which resulted in a long tedious procedure and an error message at the end At this point being pretty pissed ans wanting blood I decided to reinstall Windows Silly me I used the same CD exactly which worked when I just bought the PC and this time when I asked to boot from the CD i got a black screen for five minutes followed by a blue fatal error Tried many times each failed Right now i'm checking the hard drive with HD Tune and will run an overnight scan of RAM with memtest but i have a strong suspicion it's gonna give me another BSOD as soon as I try to boot from USB I am absolutely lost here If even reinstalling windows doesn't work what do I have to do I did not touch the BIOS in any way and first time I installed Windows with problems Help me please I am adding the dumps in attachement zip and can provide logs from WhoCrashed if needed Says something about ntfs sys aswndisflt sys which is an avast file and ntoskrnl exe

A:BSOD while playing LoL, affected avast!, BSOD when reinstalling Win7

Tenyoriu, I'll try to help with your problems. You have 3 dump files and from all of the errors I see, you seem to have some problems.

I am just going to show you a few of them. I could probably fill up the page with code, which I doubt means much to you. But, then I am going to give you a list of several things to do. I only ask that you read the instructions carefully and follow them. Hopefully we can get to the bottom of what the main issue is.

I know you said you uninstalled Avast, but it and the next one appear in every dump file.


Code:
aswNdisFlt T (no symbols)
Loaded symbol image file: aswNdisFlt.sys
Image path: \SystemRoot\system32\DRIVERS\aswNdisFlt.sys
Image name: aswNdisFlt.sys
Timestamp: Thu Nov 06 06:55:50 2014 (545B6FD6)
CheckSum: 0007AC90
ImageSize: 00070000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e
That is the Avast Firewall driver


Code:
fffff880`0338ba28 fffff880`045ce338*** WARNING: Unable to verify timestamp for cfosspeed6.sys
*** ERROR: Module load completed but symbols could not be loaded for cfosspeed6.sys
cfosspeed6+0x176338

Code:
cfosspeed6
start end module name
fffff880`04458000 fffff880`045f5000 cfosspeed6 T (no symbols)
Loaded symbol image file: cfosspeed6.sys
Image path: \SystemRoot\system32\DRIVERS\cfosspeed6.sys
Image name: cfosspeed6.sys
Timestamp: Mon Jul 04 08:18:51 2011 (4E11BDBB)
CheckSum: 0019A733
ImageSize: 0019D000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
That is CFoss, which you apparently have installed to speed up your internet. Please uninstall it.


Code:
LGSHidFilt
start end module name
fffff880`0740d000 fffff880`07422000 LGSHidFilt T (no symbols)
Loaded symbol image file: LGSHidFilt.Sys
Image path: \SystemRoot\system32\DRIVERS\LGSHidFilt.Sys
Image name: LGSHidFilt.Sys
Timestamp: Thu May 30 10:16:33 2013 (51A76D51)
CheckSum: 000169DA
ImageSize: 00015000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
That is your Logitech Gaming driver, please try to update it from Logitech's web site.


Code:
Rt64win7
start end module name
fffff880`04a00000 fffff880`04a8d000 Rt64win7 T (no symbols)
Loaded symbol image file: Rt64win7.sys
Image path: \SystemRoot\system32\DRIVERS\Rt64win7.sys
Image name: Rt64win7.sys
Timestamp: Tue Aug 23 08:55:41 2011 (4E53B15D)
CheckSum: 00097338
ImageSize: 0008D000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
That is your Realtek RTL8168D/8111D Family PCI-E Gigabit Ethernet NIC which is quite old and should be updated from your motherboard's web site.

I am concerned about the Avast quit working and then wouldn't install. That is one sign of a virus. So, whatever anti virus you have now, please do a complete scan.

Also download malwarebytes (Malwarebytes | Free Anti-Malware & Internet Security Software) please download the free vbersion, and uncheck the start real time protection and use it as an on demand AV scan. Run a full scan of all hard drives with it.

Also run these online virus scans

http://support.kaspersky.com/viruses...on/5350#block1
Anti-rootkit utility TDSSKiller
ESET online scanner:
Free Virus Scan | Online Virus Scanner from ESET
Free Online Virus Scanner | ESET

Next please run the short and long test with Seatools for DOS SeaTools for DOS and Windows - How to Use

And Check Disk Disk Check

Please also open an elevated command prompt ( click start, type cmd in the search box, right click on the cmd entry and select run as administrator) in the black box that opens, copy/paste sfc /scannow. If you decide to type it, notice the space between the sfc and the /. It is a system file checker which will scan your sys... Read more

http://www.sevenforums.com/bsod-help-support/359494-bsod-while-playing-lol-affected-avast-bsod-when-reinstalling-win7.html
Relevancy 46.44%

Hello everyone For over a year I have been using an HP Pavilion Pentium Problem data reinstalling Windows wipe after XP - "Process1_Initialization_Fail" BSOD HT WinXP Pro SP GB RAM GB HD desktop with no problems at all Last night I used DBAN Boot and Nuke to wipe my data clean in hopes of reinstalling WinXP fresh This morning while trying to reinstall Windows XP Pro SP I ran into several problems - The copy I paid for was not recognized as a full version - A backup copy I had borrowed from a friend was recognized and successfully allowed me to format my HD However while installing the OS after getting to Problem reinstalling Windows XP after data wipe - BSOD "Process1_Initialization_Fail" about of the files copied it started saying it couldn t find certain files - I had to swap copies of the WinXP discs several times and Retry to get all of the windows files copied Before getting to that I formatted my HD using NFTS full which was successful After finally getting all the Windows files copied the system performed the initial reboot and after the Windows XP black logo screen I got the BSOD stop error quot Process Initialization Failure quot I ve been reading a lot of threads on this but none of them directly apply to me I do not have Norton GoBack installed and have never had any issues with this computer at all so I don t see how it could be a HD Memory or CDROM issue I really need some help as my computer is currently unusable Do I need a new copy of WinXP Pro Please advise - thanks nbsp

A:Problem reinstalling Windows XP after data wipe - BSOD "Process1_Initialization_Fail"

What does "The copy I paid for was not recognized as a full version." mean?

after getting to about 80% of the files copied it started saying it couldn't find certain filesClick to expand...

Usual suspects for those symptoms are Memory errors. Bad or scratched install Disc, Install disc is a copy vs. original and CD-ROM not reading correctly.

The memory is highly stressed during an install and could show errors not usually seen
 

https://forums.techguy.org/threads/problem-reinstalling-windows-xp-after-data-wipe-bsod-process1_initialization_fail.562955/
Relevancy 43.86%

Page Fault in Non-Paged Area BSOD (STOP 0x00000050) constantly on XP Pro Dell laptop. Cannot even boot in safe mode. No new hardware, unsure of new software (my dad's old laptop from work that has not been used in a few months.)

Tried reinstalling from Windows XP Pro CD, however, when it got to the point of looking for existing installations of Windows, got the same BSOD. So now I'm completely stuck. Hoping someone out there has an idea for me?

Thanks much.
 

A:BSOD: Even when reinstalling XP via CD..

Have you
1. tried booting to safe mode?
2. looked for minidumps in the minidump directory?
3. checked hard-drive for integrity?
4. checked memory (Memtest)? Defective memory (including main memory, L2 RAM cache, video RAM) or incompatible software (including remote control and antivirus software) might cause Stop 0x50 messages.

5. reviewed and followed the advice here ... http://www.techspot.com/vb/topic51365.html

And are you using an XP Pro CD that is an OEM or branded version from another system?
 

http://www.techspot.com/community/topics/bsod-even-when-reinstalling-xp-via-cd.153064/
Relevancy 43.43%

Hi I'm hoping someone here can help me this I started getting blue screens about a week ago - Memory Management Irql ntfs sys video driver errors didn't save the dumps before format - that sort of thing so I updated uninstalled reinstalled drivers and programs with no luck Ran HDD diagnostics and Memtest with no errors Removed the video card and tried to reinstalling and when now freezing Bsod run the PC with one ram stick at a time again no luck By this stage the blue screens had gotten so Bsod and now freezing when reinstalling frequent I couldn't get any work done so I decided to hell with it and went for a format and reinstall of Vista I attempted to install multiple times and the screen would freeze or blue screen at expanding files or after restart sometimes with a buzzing noise coming from somewhere I took the HDD out and used Killdisk on it and a full format with another computer - no go I got a spare Hdd and tried to install Vista on that with the same results I've tried to install Vista Home SP and Vista Basic SP disabled the disk drive and Bsod and now freezing when reinstalling used a bootable usb The weird thing in all this is I installed Ubuntu Linux from a usb with no problem and it seemed to be perfectly stable but I'd prefer not to have to learn the idiosyncrasies Bsod and now freezing when reinstalling of a new OS not at my age grumble grumble I 'm completely stumped Anyway any help will be greatly appreciated My PC Inspirion Intel Core Quad Q GHz Ati gb gb ram PSU X-Power W

A:Bsod and now freezing when reinstalling

<<Ran HDD diagnostics and Memtest with no errors>>
 
Honestly...it sounds like a hard drive problem...but it could be a damaged partition structure if the hard drive truly checks out as functionally OK.  I take it back,  NTFS errors can indicate such.
 
I'd try to run chkdsk /r command and see if it completes without a problem.  If any onscreen error message comes up that it cannot continue...please post same.
 
Oops...I just read where you state that you tried a different hard drive in the system, so those theories should not apply.
 
I also know that a failing CMOS battery can cause all sorts of false alarms re RAM, drivers, etc., with all items being hardware-related.
 
I also suppose that RAM problems can result in what you seem to have experienced...but I've not seen/experienced such.
 
Louis

http://www.bleepingcomputer.com/forums/t/503890/bsod-and-now-freezing-when-reinstalling/
Relevancy 43.43%

long story short my power supply died got after reinstalling BSOD mobo a new power supply the wrong one at first which made me think that the motherboard had died got a new motherboard and it took me that long to finally figure out that the power supply was not what the seller was supposed to have sent so i finally got the right power supply reinstalled the old motherboard and that brings us to today i am BSOD after reinstalling mobo working with a Dell Precision windows XP OS no extra hardware was installed or removed bios sp i think maybe it was BSOD after reinstalling mobo after fixing the boot sequence i now get the dreaded BSOD x B xBA C xC x x i can run the setup utility i can even get the start up screen that asks if i want to do a safeboot but everything leads back to the bsod also i can t find my boot disk i know i have it i BSOD after reinstalling mobo just can t seem to find it

A:BSOD after reinstalling mobo

BSOD VIEW -To further help us can you please follow these directions for Blue Screen View -Download/install BlueScreenView, http://www.nirsoft.net/utils/blue_screen_view.html .Double-click BlueScreenView.exe file.When autoscan is done (screen comes up), click Edit/Select All...then File/Save Selected Items.Save the report as BSOD.txt.Open BSOD.txt in Notepad, copy all content and paste it into your next reply -Thank You - EDIT - I now note that you cannot boot the system normally. You may be able to try the above in Safe mode with networking (if it will boot that far).Also noted STOP 0x7B ... , it is most likely the use of a SATA HDD that is the problem.Try changing your BIOS to "IDE-compatible" setting? If this is a problem please post back for further advice -T.Y.

http://www.bleepingcomputer.com/forums/t/434031/bsod-after-reinstalling-mobo/
Relevancy 43.43%

Hi I m hoping someone here can help me this I started getting blue Bsod and when freezing no reinstalling screens about a week ago - Memory Management Irql ntfs sys video driver errors - that sort of thing so I updated uninstalled reinstalled drivers and programs with no Bsod and no freezing when reinstalling luck Ran HDD diagnostics and Memtest with no errors Removed the video card and tried to run the PC with one ram stick at a time again no luck By this stage the blue screens had gotten so frequent I couldn t get any work done so I decided to hell with it and went for a format and reinstall of Vista I attempted to install multiple times and the screen would freeze or blue screen at quot expanding files quot or after restart sometimes with a buzzing noise coming from somewhere I took the HDD out and used Killdisk on it and a full format with Bsod and no freezing when reinstalling another computer - no go I got a spare Hdd and tried to install Vista on that with the same results I ve tried to install Vista Home and Vista Basic disabled the disk drive and used a bootable usb The weird thing in all this is I installed Ubuntu Linux from a usb with no problem and it seemed to be perfectly stable but I d prefer not to have to learn the idiosyncrasies of a new OS not at my age grumble grumble I m completely stumped Anyway any help will be greatly appreciated My PC Inspirion Intel Core Quad Q GHz Ati gb gb ram PSU X-Power W Update - OK so I popped the original W PSU the PC came with and attempted to install Vista Basic from disk - it froze before getting to quot copying files quot tried again and got a blue screen at quot expanding files quot PFN LIST CORRUPT stop code x e x x da x f f x Put in the Vista Home disk and it froze at quot expanding files quot with the buzzing noise coming from the motherboard I think Dug out a XP SP disk from a long gone computer started install and it restarted entered product key and a couple of minutes later it blue screened - IRQL NOT LESS OR EQUAL STOP CODE X A X X C X X FAZA nbsp

A:Bsod and no freezing when reinstalling

OK, so I popped the original 300 W PSU the PC came withClick to expand...

What does that mean? Did your old PSU quit? If not, try using it again and see how it goes. The PSU you now have is junk and could be your problem. Keep in mind, the PSU is the most important part of the computer and should not be skimped on when replacing.
Something like this would serve you well.

http://www.newegg.com/Product/Product.aspx?Item=N82E16817139020
To help us help you,please use the TSG System Info tool to let Tech's know the specs of your computer: http://static.techguy.org/download/SysInfo.exe Copy and paste the results here in your thread. You can use the TSG Info to fill in your computer information in your user profile as well.

Also, if its a brand name system like an Acer,Dell or HP, please post the exact model of the system.
 

https://forums.techguy.org/threads/bsod-and-no-freezing-when-reinstalling.1105702/
Relevancy 43.43%

Hello I'm new to this forum and HP after with BSOD OS Envy14 reinstalling even not very BSOD with HP Envy14 even after reinstalling OS tech savvy but really need some expert advice on helping me to solve the problem with my system My laptop is HP Envy with Windows Home Premium -bit I have had the laptop for about years now but been experiencing the BSOD only for the past weeks now It occurs at random times the worst was up to times a day and this is when I decided to fully reinstall the Windows Before this I did all sorts of Windows HP troubleshooting restore points command checks etc and none of them showed problems I've been suspecting my Norton anti-virus programme to be the cause before reinstalling Windows whenever I wanted to open Norton it wouldn t let me and BSOD appears however I have reinstalled the Norton but BSOD still occurs and I can access Norton fine after reinstallation of Windows The blue screen message I ve been getting is the quot page fault in non-paged area quot and through BlueScreenView I have gathered some information regarding the crashes after reinstalling Windows Dump file - - dmp Crash date amp Time PAGE FAULT IN NONPAGED AREA Bug check code x fffff e b fffff a a Caused by driver ntoskrnl exe Caused by address ntoskrnl exe bc File description NT Kernel amp System Microsoft Windows Operating System Microsoft Corporation File version win sp gdr - Processor x Crash Address ntoskrnl exe bc Full Path C Windows Minidump - - dmp Processor Count I also had a crash for another driver Dump file - - dmp Crash date amp time PAGE FAULT IN NONPAGED AREA Bug check code x fffff e de fffff ea Caused by driver iaStor sys Caused by address iaStor sys d File description Intel Rapid Storage Technology driver - x Microsoft Windows Operating System Microsoft Corporation File version Processor x Crash Address ntoskrnl exe bc Full Path C Windows Minidump - - dmp Processor Count I have also had BSOD happening due to Synaptics Touchpad Driver fault therefore it seems there are multiple drivers that are causing these and there seems no way for me to know how to fix all of them I have attached a zip file of the dump file Please anyone suggestions Laura

A:BSOD with HP Envy14 even after reinstalling OS

Welcome to SF .

All of the bug checks are the same, 0x50 and they appear to originate from outdated display drivers.

Code:
BugCheck 50, {fffff88144ea4b60, 0, fffff88006787a18, 5}

*** WARNING: Unable to verify timestamp for igdpmd64.sys
*** ERROR: Module load completed but symbols could not be loaded for igdpmd64.sys

Could not read faulting driver name
Probably caused by : igdpmd64.sys ( igdpmd64+15aa18 )


Code:
2: kd> lmvm igdpmd64
start end module name
fffff880`0662d000 fffff880`071debc0 igdpmd64 T (no symbols)
Loaded symbol image file: igdpmd64.sys
Image path: \SystemRoot\system32\DRIVERS\igdpmd64.sys
Image name: igdpmd64.sys
Timestamp: Sat Mar 26 04:17:43 2011

2: kd> lmvm atikmpag
start end module name
fffff880`04cd2000 fffff880`04d21000 atikmpag (deferred)
Image path: \SystemRoot\system32\DRIVERS\atikmpag.sys
Image name: atikmpag.sys
Timestamp: Wed Apr 13 05:17:14 2011

2: kd> lmvm atikmdag
start end module name
fffff880`05820000 fffff880`06147000 atikmdag (deferred)
Image path: \SystemRoot\system32\DRIVERS\atikmdag.sys
Image name: atikmdag.sys
Timestamp: Wed Apr 13 06:08:37 2011
Driver Reference Table - igdpmd64.sys
Driver Reference Table - atikmpag.sys
Driver Reference Table - atikmdag.sys

Please use this set of online utilities and update any Intel drivers it suggests,
as well as with the AMD utility (the AMD utility should find only the GPU [graphics card] driver).
Intel? Driver Update Utility
AMD Driver Autodetect
Keep us informed .

http://www.sevenforums.com/bsod-help-support/310749-bsod-hp-envy14-even-after-reinstalling-os.html
Relevancy 43%

My mom attempted to reinstall Windows XP the in of BSOD middle reinstalling WinXP on her computer and ran into some trouble I hope someone can help Most of the installation process went fine but every once in a while it would pause and say a file was missing choose whether or not to continue She continued thinking it was something that could be fixed after the fact but I'm guessing that was a mistake After the quot installing files quot screen it rebooted and crashed with a blue screen saying something like quot c a - logon process system terminated wtih status xc quot Every time you restart the computer it gives you the opening welcome Windows XP screen then crashes BSOD in the middle of reinstalling WinXP with BSOD in the middle of reinstalling WinXP the same BSOD I've tried to give it a quot do-over quot with an XP disk of my own that I know works but it won't do anything with it When I put the disk in and start up the computer I get the pale blue setup screen for XP and it says quot set up is restarting quot and then the same BSOD I've tried changing the boot priority so that the CD comes first but it didn't help It does recognize the CD drive in that it lights up green upon starting and seems to recognize that there's an XP disk in it but it won't or can't get past whatever it seems to be stuck on I'm not very computer-savvy myself and I'm not sure what info you folks need to know what I'm working with but I'll give it my best computer is an IBM Netvista - machine type model listed as U not sure of the exact age but definitely several years old P processor GB hard drive was previously running Windows XP no problem - we tried to reinstall mostly to get rid of some whacky settings my father had put on thinking it was the lazy way out I read about KillDisk and I thought it might be useful for getting rid of this partial faulty installation thing that seems to be hanging me up but again I can't seem to get the computer to read from the CD drive If anyone can solve that problem for me maybe the rest will resolve itself Everything important was removed from the computer before the attempted reinstall so I'm not concerned with preserving anything I just want to get it back up and running for her I'll try to come up with any other info needed on the computer if it's important

A:BSOD in the middle of reinstalling WinXP

It definitely sounds like a corrupted installation.

DBAN or Killdisk would erase the hard drive completely, thus allowing you to start the installation from scratch.

Although, you say that your PC won't boot from the CD drive now? Have you tried making a copy of DBAN or Killdisk just to see if the PC would boot from one of those?

http://www.techsupportforum.com/forums/f10/bsod-in-the-middle-of-reinstalling-winxp-434410.html
Relevancy 43%

Unit was getting slower day by day. Ran online and local Av, malware, rootkits and checked disk etc and found nothing. Reinstalled macrium image and all file assciation was gone. Some folders had 3 of the same file, File names were black and some blue in color. Color had happened to some files in the past. Some picture icons were empty, some icons had pictures but no titles. Found pictures in 7 diff folders and my docs were all over the place. So put together what I could and copied to another disk. Reformed the disk and got BSOD. Put the disk in another PC and reformed it -ok. Put back in orignal unit BSOD. Put a new disk in unit and BSOD. Reset the BIOS and it took -time wise - longer to show BSOD. Lights on memory showed various combinations of yellow and red but always the same number and at the same time.
What do you suggest next.

A:[SOLVED] BSOD after reinstalling image

NOTE: Please provide the following information for a more detailed response: http://www.techsupportforum.com/foru...ta-452654.html

While waiting for a reply:

I suggest starting all troubleshooting with the following diagnostic tests (located at this link: Hardware Diagnostics ). They'll save you a lot of time and heartache if there is a hardware failure, and you'll have the disks on hand in case you need them in the future:

Quote:




H/W Diagnostics:
Please start by running these bootable hardware diagnostics:
Memory Diagnostics (read the details at the link)
Hard Drive Diagnostics (read the details at the link) - Test ALL of the hard drives.

Also, please run one of these free, independent online malware scans to ensure that your current protection hasn't been compromised: Free Online AntiMalware Resources (read the details at the link)
There are also free, bootable antivirus disks at this link: Free Online AntiMalware Resources - Bootable Disks

http://www.techsupportforum.com/forums/f299/solved-bsod-after-reinstalling-image-623108.html
Relevancy 43%

Seems to happen at random intervals. Running Eve Online, Sometimes League of Legends, Jabber client pidgin, mumble and chrome.

A:BSOD began when reinstalling Eve Online

Hey and welcome to SevenForums!

Code:
BugCheck 1A, {411, fffff68005081ca0, 8e20000173f25886, fffff68405081ca1}

Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+5fe1 )
Run sfc /scannow and chkdsk /f.
Install the latest updates from Windows Update.

Do the exact same steps for chkdsk /f but instead of typing in sfc /scannow type chkdsk /r.

SFC /SCANNOW Command - System File Checker

http://www.sevenforums.com/bsod-help-support/371754-bsod-began-when-reinstalling-eve-online.html
Relevancy 43%

Hi all,

I have just reformatted a parition of my hard drive to a fresh install of win 7
I bought the PC a long time ago from a friend and it was running on Win 7 Ultimate 64x, but it wasnt genuine, as such the updates where turned off so i couldnt use Visual Studio

After the fresh install, the PC has had a few blue screens, it now has a genuine key for the disc/version.
Ive used the tool supplied by the forum and attatched the zip to the post

I've added as many system specs as i can to my profile regarding the base unit, so hopefully this helps, i wasnt getting the BSOD's before the reinstall

http://www.sevenforums.com/bsod-help-support/390573-bsod-after-reinstalling-win-7-home-premium-64x.html
Relevancy 43%

Hopefully someone here can help me out this has been driving me mad NTOSKRNL.EXE, after reinstalling even OS BSOD 0x00000101, from I'd been getting a lot of BSODs related to various drivers from all sorts of sources such as AMD drivers and network drivers and I read that this may be due to quot leftover drivers quot and registry entries left behind after updating drivers I didn't much feel like tracking down and cleaning out all this so I just opted to reinstall Windows which has helped in the past I thought it did help this time but I got a BSOD again a short time BSOD from NTOSKRNL.EXE, 0x00000101, even after reinstalling OS ago related to NTOSKRNL exe with a x bug check code which I'd seen before I reinstalled Windows I'm getting this info BSOD from NTOSKRNL.EXE, 0x00000101, even after reinstalling OS from Bluescreen View the BSOD itself said quot BSOD from NTOSKRNL.EXE, 0x00000101, even after reinstalling OS A clock interrupt was not received on a secondary processor within the allocated time interval quot Please help I'm at the end of my rope here What info do you need from me to help me get this sorted EDIT Added the required Seven Forums Diagnostic zip file My bad should have read before posting

A:BSOD from NTOSKRNL.EXE, 0x00000101, even after reinstalling OS

Hey Namo, welcome to SF .

0x101, unfortunately this bug check code doesn't contain enough
information in the minidump file be analyzed fully.

Please upload the Kernel dump file using Dropbox or Skydrive, the file is located in the Windows directory
and is usually a few hundred Megabytes in size.

Code:
C:\Windows\MEMORY.dmp
The single hint I can get from the minidump is with relation to the GPU (Graphics card).

What is the make, model and age of your PSU (Power Supply)?
Fill out this form and post back the result:
Power Supply Calculator

Test for thermals and stability:
Download HWinfo and post a Screenshot of the sensors window, one at idle and another while putting load on the PC using Prime95 for the CPU side and Furmark for the GPU.Before running Prime95 make sure to enable Round-off checking (see 1st post under the tutorial).


   Note
It is not mandatory to run both tests simultaneously, although possible as long as the temperatures are under constant monitoring.

Testing the RAM:








  
Quote: Originally Posted by koolkat77


Test and Diagnose RAM Issues with Memtest86+:
RAM - Test with Memtest86+


   Tip
Pay close attention to part 3 of the tutorial "If you have errors"
Test the RAM with Memtest86+ for at least 7-10 passes. It may take up to 22 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold.




When done with the testing procedure take a picture and upload it here.

This will help you to determine where the issue is origination from (if any):







  
Quote: Originally Posted by Arc


First run it with all the existing/installed RAM modules. If it comes with no error, all is good.

But if it starts showing errors, Stop testing. Errors/red lines means one or more RAM is faulty. But the fault may occur due to a faulty DIMM slot, too, which is a motherboard component. Using memtest86+, you can discriminate between a faulty RAM and a faulty motherboard.

How? Say you have two RAM sticks and two DIMM slots. You obtained errors at the test with all RAM sticks installed. Now, remove all the sticks but one. Test it in all the available slots, one by one. Continue the same procedure for all the available sticks.
How to make the inference that is it a RAM issue or it is a motherboard issue? Suppose you have got the result like that:
testSlot1Slot2RAM1ErrorErrorRAM2GoodGood It is a RAM, a bad RAM.

But if you have got a result like that:
testSlot1Slot2RAM1ErrorGoodRAM2ErrorGood It is a motherboard issue. The particular slot is bad.

http://www.sevenforums.com/bsod-help-support/320751-bsod-ntoskrnl-exe-0x00000101-even-after-reinstalling-os.html
Relevancy 43%

Earlier today I decided to reinstall chrome to see if it maybe cut down on the ram usage only to be greeted with a bsod when chrome launched after the fresh install After the initial bsod whenever windows started after System_service_exception chrome reinstalling BSOD up it would hang for a BSOD after reinstalling chrome System_service_exception bit then bsod again after a quot Installing device drivers quot box appeared in the taskbar After hours of racking my brain as I couldn't get to system restore or device manager in time I realised I could just use startup repair to roll back to the last restore but every time I click chrome it won't launch at all and reinstalling again even after updating all drivers causes the same issue again Can anyone help explain to me what's going on Any help would be much appreciated Here's the bsod errors System service exception x b x c xfffff a e xfffff de x Asmtxhci sys - address fffff a e base at fffff a Datestamp f f

http://www.sevenforums.com/bsod-help-support/396923-bsod-after-reinstalling-chrome-system_service_exception.html
Relevancy 43%

Okay I dont know 7 AND and BSoD reinstalling OS(xp issues gurus please) if this is the place to post this BSoD issues and reinstalling OS(xp AND 7 gurus please) because it has to do with a system with xp BSoD issues and reinstalling OS(xp AND 7 gurus please) on it but I figure you guys can help out anyways So my mothers boyfriends computer is about years old and its got xp on it It usually runs fine and he doesnt use it for much besides low end programs and internet browsing via IE Well tonight he went afk the computer went to sleep and he got back and the system was running really slowly He rebooted and now it gets the bluescreen when windows is loading Something ive also noted before about the past couple months is that his computer has been booting really slowly it takes five minutes from login to open and have a usable browser window open interestingly enough the bluescreen just flashes and auto reboots the computer Ive heard of this before from my friends Whether or not they are right about this they said it had to do with a 'reboot on bluescreen' setting I dont know and im not sure if i should care because We couldnt get it to boot in anything safe mode last safe config regular w e So i tried installing w on it but its really laggy It takes about minutes to get to the part where it asks you what language and where you are and it completly hangs up at the 'starting windows' screen shortly after clicking install I was just wondering based on what ive said can anybody advise me on what i should do We would rather not have to buy a new computer for him and the last place i ever want to go is to geeksqaud - - no offense to any geeksquad members Short version computer bluescreen flashes and resets on OS boot up is way too laggy for the system specs is years old and even freezes or doesnt load when installing a new operating system Thanks in advance guys

A:BSoD issues and reinstalling OS(xp AND 7 gurus please)

  
Quote: Originally Posted by koralyne


Okay, I dont know if this is the place to post this, because it has to do with a system with xp on it, but I figure you guys can help out anyways.

So, my mothers boyfriends computer is about 2 years old, and its got xp on it. It usually runs fine, and he doesnt use it for much besides low end programs and internet browsing via IE

Well, tonight he went afk, the computer went to sleep, and he got back and the system was running really slowly. He rebooted, and now it gets the bluescreen when windows is loading. Something ive also noted before, about the past couple months, is that his computer has been booting really slowly. (it takes ~five minutes from login to open and have a usable browser window open) interestingly enough, the bluescreen just flashes, and auto reboots the computer. Ive heard of this before, from my friends. Whether or not they are right about this, they said it had to do with a 'reboot on bluescreen' setting. I dont know, and im not sure if i should care, because...

We couldnt get it to boot in anything. safe mode, last safe config, regular w/e. So i tried installing w7 on it... but its really laggy. It takes about 10 minutes to get to the part where it asks you what language, and where you are, and it completly hangs up at the 'starting windows' screen shortly after clicking install.

I was just wondering, based on what ive said, can anybody advise me on what i should do? We would rather not have to buy a new computer for him, and the last place i ever want to go is to geeksqaud -.- (no offense to any geeksquad members)

Short version: computer bluescreen flashes and resets on OS boot up, is way too laggy for the system specs, (is 2 years old) and even freezes or doesnt load when installing a new operating system

Thanks in advance guys.


One way would be to do a clean install of win 7. that woould cure the problem (probably) and get him on a newer OS. Before you do go to MS and get the upgrade advisor to se if his computer can do it.

Ken

http://www.sevenforums.com/bsod-help-support/60121-bsod-issues-reinstalling-os-xp-7-gurus-please.html
Relevancy 43%

Hi there I recently purchased a computer from a friend who error while 0x00000024 reinstalling XP BSOD curiously skipped town recently and to put 0x00000024 BSOD error while reinstalling XP it bluntly bad things are happening Anyway here s whats going on when I got the computer hooked up and everything it started restarting whith no prompt When it came back to Windows it gave me a fatal error message So I decided since I had no use for any of the files on the system that I would just reinstall I formatted the hard drive not the quick format and made a fresh partition to install Windows When the setup got to the part where it starts copying files needed to install Windows i get a stop error x When I m not getting that error it s telling me that Windows cannot copy filename please press x to restart or y to continue copying without file I have read that this could be a number of things including RAM Hard Drive or fault ide wires I was hoping that I could get a more dead on answer before I shell out the money for any new hardware This is my last chance to get answers before I just take it to the repairman nbsp

A:0x00000024 BSOD error while reinstalling XP

I wish I or someone else could just tell you what is wrong...but this type of problem is not clear cut and could be any of the things that you have mentioned.

Have you googled the exact error message that you are receiving?

Others will want to know some specifices about your machine, memory, etc. Provide as much detail as you can.
 

https://forums.techguy.org/threads/0x00000024-bsod-error-while-reinstalling-xp.440256/
Relevancy 42.57%

Hello,

I was in the process of updating my drivers on a new hard drive (Old one failed), after re-installing windows 7 on it, when i got a BSOD. I feel like it might have something to do with one of the drivers i installed/re-installed, but the log's below so feel free to have a look. I've created a number of restore points as well as a system repair disk.

Thanks!

A:BSOD after reinstalling drivers + win 7 on a new hard drive

Welcome to 7F.

Please fill out your System Specs.



   Information
At 7F we rely heavily on knowing what hardware you have in your system, by filling out your system specs in the manner outlined below your specs will follow you round in every single post so we can see your hardware configuration at the click of a button without having to trawl through threads to find them.
Follow System Info - See Your System Specs to fill in your System Specs with as much info as possible.


Your single BSOD is pointing at an error with your hard drive. Considering you've already had a hard drive fail it would lead me to thinking your SATA controller on your motherboard sounds suspect.
Code:
KERNEL_DATA_INPAGE_ERROR (7a)
The requested page of kernel data could not be read in. Typically caused by
a bad block in the paging file or disk controller error. Also see
KERNEL_STACK_INPAGE_ERROR.
If the error status is 0xC000000E, 0xC000009C, 0xC000009D or 0xC0000185,
it means the disk subsystem has experienced a failure.
If the error status is 0xC000009A, then it means the request failed because
a filesystem failed to make forward progress.
Arguments:
Arg1: fffff6fc8060d4f8, lock type that was held (value 1,2,3, or PTE address)
Arg2: ffffffffc0000185, error status (normally i/o status code)
Arg3: 000000000d887880, current process (virtual address for lock type 3, or PTE)
Arg4: fffff900c1a9ff80, virtual address that could not be in-paged (or PTE contents if arg1 is a PTE address)

Debugging Details:
------------------
ERROR_CODE: (NTSTATUS) 0xc0000185 - The I/O device reported an I/O error.

DISK_HARDWARE_ERROR: There was error with disk hardware

BUGCHECK_STR: 0x7a_c0000185

CUSTOMER_CRASH_COUNT: 1
Run the following checks just to verify your drive is OK. Do you have a spare SATA port on your motherboard you could connect your hard drive to?


Hardware Diagnostics

 HARD DRIVE TESTS
Run SeaTools to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use

Run chkdsk. Disk Check

http://www.sevenforums.com/bsod-help-support/366549-bsod-after-reinstalling-drivers-win-7-new-hard-drive.html
Relevancy 42.57%

When i start my computer up it loads some programs like steam and windows 10 update window then the BSOD happens everytime. it started after i uninstalled my headphones then trying to install them again, my headphones are (Tecknet 7.1 Sound Effect Gaming Headset)

DANNYS-PC-24_10_2015_145534_57.zip

A:BSOD On start up after reinstalling headphone drivers.

Hi DannyStar91,

Welcome to the 8forums.

Daemon tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known cause for BSOD's.
Please remove Daemon Tools and run the SPTD pass through remover.
Uninstall Daemon ToolsDownload the SPTD standalone installer and follow these steps:
Double click the executable to open itClick on the button shown below
If the button is grayed out, like in the image, there is no more SPTD installation on your system, and you can close the window.

Please remove MSI software, this software is known for causing problems.

Please check Killer for driver updates.
A driver part of Killer network device has been flagged.

Code:
*** WARNING: Unable to verify timestamp for bwcW8x64.sys
*** ERROR: Module load completed but symbols could not be loaded for bwcW8x64.sys
3: kd> lmvm bwcW8x64
start end module name
fffff801`cba94000 fffff801`cbbea000 bwcW8x64 T (no symbols)
Loaded symbol image file: bwcW8x64.sys
Image path: \SystemRoot\system32\DRIVERS\bwcW8x64.sys
Image name: bwcW8x64.sys
Timestamp: Fri Nov 08 16:31:59 2013 (527D03EF)
CheckSum: 00020D5C
ImageSize: 00156000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4


Please check Via Labs for driver updates for the USB Host Controller driver

Code:
*** WARNING: Unable to verify timestamp for ViaHub3.sys
*** ERROR: Module load completed but symbols could not be loaded for ViaHub3.sys

2: kd> lmvm ViaHub3
start end module name
fffff800`b1000000 fffff800`b103e000 ViaHub3 T (no symbols)
Loaded symbol image file: ViaHub3.sys
Image path: \SystemRoot\System32\drivers\ViaHub3.sys
Image name: ViaHub3.sys
Timestamp: Mon Jan 20 03:19:17 2014 (52DC87A5)
CheckSum: 000456C6
ImageSize: 0003E000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4


Please remove this driver, it is known for causing BSOD's.

Code:
AODDriver4.2.0 c:\program files\ati technologies\ati.ace\fuel\amd64\aoddriver2.sys

http://www.eightforums.com/bsod-crashes-debugging/71862-bsod-start-up-after-reinstalling-headphone-drivers.html
Relevancy 42.14%

Here's my original thread at MS forums Lots of random BSODs trying to figure out after even reinstalling BSOD, and graphics card drivers 116 replacing what is going bad - Microsoft Community There are links to dump files and bluescreenview screenshots there and a description history of the problem Turns out my old GTX did 116 BSOD, even after replacing graphics card and reinstalling drivers have some issues which were made clear when it crashed during benchmark on my second system which 116 BSOD, even after replacing graphics card and reinstalling drivers has no issues otherwise So I bought a new reference GTX and it ran great on the second system Now after coming back to the first system it's still crashing Here's the info from the utility in the sticky in this forum https onedrive live com redir resi int file czip EDIT Attached file to this post as well Anything in July or after is with the new GTX I'm beginning to think it either really is a PSU issue as per original thread I tested the PSU with a digital voltmeter and it was fine but I did not test it under load some freak motherboard issue but it didn't crash once while using onboard intel graphics or driver issue looks like maybe directx I'm waiting to upgrade to Windows to see if the DX will end the crashes My friend had BSOD issues on his new build and upgrading to Win insider preview fixed it I'm reluctant to upgrade to the insider preview but if it keeps crashing to the point of being unusable I might try it barring better advice obtained here Thanks for any help you can provide this has driven me crazy and I've already spent trying to fix it The problem suddenly appeared in May out of nowhere system was built installed in summer of It is not overclocked anymore and to be doubly sure I reset BIOS to defaults today and it still crashed actually it just plain shut off System Maximus IV Gene-Z Micro-ATX Core i k gb ram gtx wd tb with gb sandisk ssd for intel bios caching gb set for caching Windows x corsair ax psu from summer EDIT Note the GTX has not crashed while gaming once These were all from Windows desktop Google chrome VLC whatever

A:116 BSOD, even after replacing graphics card and reinstalling drivers

Oh and I ran SFC /scannow and stuff. When I tried to do it specifically on some of those directx files (mms), it said it couldn't do it. Even in safe mode.

System is stable in Safe Mode too.

I've also tried various Nvidia drivers, using driver sweeper/uninstaller (DDU one) each time. Including before installing the latest drivers when I put in the new video card.

http://www.sevenforums.com/bsod-help-support/375562-116-bsod-even-after-replacing-graphics-card-reinstalling-drivers.html
Relevancy 42.14%

Hi I'm new BSOD HD after 5670 crashes updating/reinstalling Radeon to the forum and not quite sure how else to proceed with my BSOD issues I play WoW but only started playing again recently after a few years break I updated my Radeon HD driver and started getting black screens errors driver non-responsive restarting BSOD's etc I made some changes per posts articles that I read renamed a file uninstalled and reinstalled the driver downloaded suggested files like a JMicron package and Alien Autopsy etc and the problem persists When I play BSOD crashes after updating/reinstalling Radeon HD 5670 WoW my driver stops responding and restarts which leads to black screens and game restarts Although this only happens when I first log in then the game usually plays but with fps rates hovering around on average my fps never used to be so low In the last few days I've noticed a marked slowdown in fps and a weird screeching noise when there is talking in-game but it is not constant It comes and goes I'm also getting BSOD crashes Sometimes one or two in a day and sometimes I'll get lucky and it will skip a day This is now happening when I'm not playing the game and going about my usual business--emails social media GDocs etc There was one incident a week or two ago where my OS wouldn't even load I kept having to hard restart and it finally worked I can follow instructions pretty well but am not particularly tech savvy I'm hoping there is an easy fix like an earlier driver version or something similar Thank you for any input

A:BSOD crashes after updating/reinstalling Radeon HD 5670

Stress test your graphics card with Furmark

I recommend running it for around 30 minutes



   Warning

Furmark will increase the temperature of your GPU rapidly so keep and eye on your temperatures

If that finds no problems then please try updating your graphics driver to the latest version.
Here's some instructions.

How-To Install AMD Catalyst? Drivers For A Windows? Based System

I also want you to run Furmark as it looks promising that your GPU is failing.

http://www.sevenforums.com/bsod-help-support/330053-bsod-crashes-after-updating-reinstalling-radeon-hd-5670-a.html
Relevancy 42.14%

Hello Since the past months i have been using my PC using my onboard graphics which is HD must be ATI but prior to that i used to have my GTX installed in this PC but it was on a bit windows On th Sept i re fitted my GTX with the latest drivers of that day first i uninstalled the ATI drivers from device manager and then used driver sweeper in safe mode but soon after BSOD nvidia reinstalling Random graphics card after installing the GTX in minutes got a BSOD but all i could Random BSOD after reinstalling nvidia graphics card see was a percentage counter like - - - and a reboot All this happened in seconds max i guess I reformatted the PC and this time installed the previous WHQL drivers from nvidia namely xx something but they didnt work either All i had left to do was to remove the GPU and reinstall the onboard drivers and without my gpu pc worked great On the th i retried the experiment and it worked for hours even played heavy game on it and used the PC as i normally do and had no issues But after hours Random BSOD after reinstalling nvidia graphics card not even playing just seeing some images on HDD and bang another BSOD SO i removed the GTX once again and its been working fine on onboard graphics since then This GTX had been working very good for the past years without a single crash or anything and then i simply removed it and kept it safely Only thing between this was a shift to bit OS all things other than that are still same I have explained the story as best as i could and i am still OK with my onboard chip but want to play some games as well in spare time but why this BSOD is beyond me hence i come to you fine people for some help The dumps have been attached as the forum asks for

A:Random BSOD after reinstalling nvidia graphics card

Also if its important or not but nothing in my system has been overclocked or tempered with.

http://www.sevenforums.com/bsod-help-support/253949-random-bsod-after-reinstalling-nvidia-graphics-card.html
Relevancy 41.71%

Pretty much what it says on the tin. I try to install the MS Virtual WiFi Miniport Adapter driver, the laptop crashes halfway through installation. Same happens when I have Windows download the driver fresh from MS.

Windows 7 Starter 32 bit
Originally installed OEM
Machine and installation under 1 year old.

A:BSOD while reinstalling Virtual WiFi Miniport Adapter Driver

  
Quote: Originally Posted by Aubri


Pretty much what it says on the tin. I try to install the MS Virtual WiFi Miniport Adapter driver, the laptop crashes halfway through installation. Same happens when I have Windows download the driver fresh from MS.

Windows 7 Starter 32 bit
Originally installed OEM
Machine and installation under 1 year old.


These were Related to athr.sys Atheros Extensible Wireless LAN device driver. Obviously a conflict between the two. I would re-install using newest version available.

http://www.sevenforums.com/bsod-help-support/190095-bsod-while-reinstalling-virtual-wifi-miniport-adapter-driver.html
Relevancy 39.13%

Hi all I just reinstalled windows After going thru a-lot of problems tried to install windows on SATA drive without having a floppy i succeed I thought that was the end for my more reinstalling Windows not occuring after loading and windows problems update problems for now at-least and started installing my drivers also formatted all the other partitions and restarted the computer Before restarting everything worked properly When the computer booted and the windows loading screen went on I thought it ll take it a few seconds but it went for like minutes and didn t stop loading I decided to grab something to eat and went for about Windows update not loading and more problems occuring after reinstalling windows more minutes when I came Windows update not loading and more problems occuring after reinstalling windows back it was still loading so i decided to restart When windows got to the safe mode screen i decided to choose try the last best setting and it helped windows loaded properly but didn t have the drivers i installed before so I installed them restart again and windows not working again back to take the last best setting and back to windows working I did it step by step installing a driver and rebooting but didn t installed RAID controller and USB driver Since i don t need them i decided to not installed them but my problem occurs when i try to update windows Internet Explorer stops working as soon as i go inside quot windows update quot or quot microsoft update quot but i know it worked before i did the first restart Also going to the Automatic Update tab in System Settings gives me an error What should i do Thanks a-lot Chaim Edit just installed the RAID driver and problem occurred again windows isn t loading another that i found happening is that after POST power on self test it takes the computer a few minutes to start loading the OS while in regular times it won t take more then a second nbsp

A:Windows update not loading and more problems occuring after reinstalling windows

I have found that installing drivers it is best to do one at a time and make sure the system boots before installing another. That way you can figure out which one is giving you a problem.
 

https://forums.techguy.org/threads/windows-update-not-loading-and-more-problems-occuring-after-reinstalling-windows.546786/
Relevancy 38.7%

So a friend and i where downloading some files and we both got a virus that causes the BSOD So whenever i start my computer and it reaches the desktop i crash and burn in a fire of blue screen death So i tried to do what he did which is reinstalling windows but for some reason my computer wont boot from the disk I went on my laptop and copied the files from the disk onto a usb and then went into bios on my broken computer and changed the boot priority to cd rom floppy and i from 7 [moved = 7] Windows Blue Reinstalling Windows Screen took out my harddrive in the thought that it would have to boot from the cd or usb since the hardrive wasnt active dissabled it in boot device priority So when i tried to boot it up again it says quot Please insert bootable Blue Screen = Reinstalling Windows 7 [moved from Windows 7] device into Blue Screen = Reinstalling Windows 7 [moved from Windows 7] device quot Both my USB and my windows OEM disk are in the computer So i guess my question is how can i get my computer to start from the disk or usb I have tried tapping f and that didnt work Dissabled Quick Boot in bios menu and now im lost and confused Thanks in advance

A:Blue Screen = Reinstalling Windows 7 [moved from Windows 7]

How about telling us brand and model of laptop. You would be literally amazed at how much easier it is to help you.

http://www.techsupportforum.com/forums/f299/blue-screen-reinstalling-windows-7-moved-from-windows-7-a-554311.html
Relevancy 38.7%

Dear Team,

I need your help with the following issue.

After reinstalling a new coly of windows 7 i cannot find my pictures in folders windows.old.
The strange think is that i cannot find the pictures and the files that where in a sub folder inside a directory.
The capacity of my hard disk shows that files are not deleted but i still cannot find them.
Can you please help me???

Thank you!!!

A:Recovering files from windows.old folder after reinstalling windows

try some 3rd party software to get your lost files back. MiniTool power data recovery tool is a nice one and you can get free licenses when they give licenses away.

http://www.sevenforums.com/backup-restore/276232-recovering-files-windows-old-folder-after-reinstalling-windows.html
Relevancy 38.7%

My friend asked me to help him dual boot Linux on his computer so I used the device manager to shrink his Windows partition and installed Ubuntu in the free space He has a Lenovo Y which features RapidDrive Windows Bootloader Partition 7 Reinstalling to Windows Access Without technology As I understood it this technology was like ReadyBoost but with an mSATA Solid State Drive I was wrong RapidDrive operates at a filesystem level effectively spanning Reinstalling Windows 7 Bootloader Without Access to Windows Partition the data across the solid state drive and the hard disk drive This configuration isn't readable by anything but the host installation of Windows and Lenovo's One Key Recovery OKR factory-defaults restoration software For some reason probably related to RapidDrive the Ubuntu install failed After the installation completed GRUB the GRand Unified Bootloader version didn't appear After some troubleshooting I decided that I wanted to boot into Windows and found that I couldn't The broken copy of GRUB had overwritten Microsoft's bootloader I tried to use Super Grub Disk to boot the Windows partition manually but it wouldn't work So I decided to use the Windows Recovery Disc to repair the startup process It worked but it made things worse Instead of repairing the boot for my Windows installation it quot repaired quot it for Lenovo's hidden OKR partitions As I understand it the bootsector points to one of the recovery partitions which has the Boot Manager installed in it Unfortunately there isn't a BCD store on that partition so the boot fails and I can't boot the recovery partition There is apparently a store on the other recovery partition because when I try to boot it manually it says that it can't access the device it needs xc e Running startup repair again produces the same result every time an error about a corrupted filesystem Unfortunately a quot corrupted quot filesystem one on the SSD that's bigger than the drive and one on the HDD that's missing data is normal for a RapidDrive system Is there a way to manually configure the Windows bootloader to point to the partition I need it to without access to the destination Windows partition Also is there a way that I can restore the ability to boot my recovery partition

A:Reinstalling Windows 7 Bootloader Without Access to Windows Partition

To Remove Linux take look at this post:
Error 0xc0000225 on boot

Remove Grub - Restore Windows 7

Lenovo's One Key Recovery may not after doing the above.



   Information
We always assume you have made your Recovery Disks using the OEM manufacturer's Recovery Media Creator app the first day you had your new PC.
& made the Startup Repair CD.
startup repair disc-create



Did you make the OEM manufacturer's Recovery Disks?

Lenovo Recovery
Lenovo Support - Home (US)

You can Order Lenovo Recovery Disks from here:
Lenovo Support - Home (US)

http://www.sevenforums.com/general-discussion/279924-reinstalling-windows-7-bootloader-without-access-windows-partition.html
Relevancy 38.7%

Hello Guys. I have a dual boot system of Windows XP installed on drive C: and Windows 7 installed on drive D: of my machine... the problem started when i re installed my windows xp on drive C: I lost the dual boot screen, now i can only boot on windows xp. How can I restore my dual boot screen so that i can also boot on windows 7. Thank you for any feedback and help.
 

Relevancy 38.7%

Cannot get out for more than a few days and these half baked builds are killing me! They say to get the next public build and opt out then. Where are these public builds? All I ever get are insider builds!

http://forums.windowscentral.com/ask-question/444292-how-can-you-opt-out-windows-insider-program-good-without-reinstalling-windows.html
Relevancy 38.7%

The problem is during the middle of the installation, at the expanding windows processes it says there's multiple corrupt files on my C: harddrive, which is where I'm attempting to install the OS on. It says to run chkdsk utility utility, but anything beyond the screen with bios always says there's a disk load error to start, or another error which I can't remember but would only allow me to restart to remove the error. Is there anyway to access the corrupt files or to let me run chkdsk utility?

A:Reinstalling windows after windows recovery options failing to help

You should be able to run the DOS version of the drive manufacturer's own analysis tool. It will attempt to fix any errors. Maybe with success, maybe not. If it fails, you may have a warranty claim.

How confident are you that you have error-free and legitimate installation media? Was it burned from an ISO? Borrowed? Bought in DVD form?

http://www.sevenforums.com/installation-setup/373039-reinstalling-windows-after-windows-recovery-options-failing-help.html
Relevancy 38.7%

I would like to reinstall Windows XP Pro on an existing partition. My hard drive has 4 partitions, and Windows XP is on one of them. How can I wipe out the current install, and install on a clean partition without removing the other partitions? The Windows XP partition is formatted with NTFS, so I cannot format it. If I use FDISK to delete just the Windows XP partition, will the install set that partition's drive letter to C:? Or will it use the first available drive letter following all the other drives? I also have Partition Magic 8.0. Can I use that to accomplish this?
 

A:Reinstalling Windows XP Pro

Boot with the winxp cd. During setup you will be given the option as to where to install. Pick the partition you want to delete / format; the next option will let you delete the partition and then format with the file system of your choice. Setup will then continue with the install of xp. If you need help setting the bios to boot from the cd as first boot device, post back.
 

https://forums.techguy.org/threads/reinstalling-windows-xp-pro.130792/
Relevancy 38.7%

Ok their is a way just to reinstall the os right? and not mess with the other files? And if so could someone explain to me how to do it? if ya could tha would help alot thanks!

Ryan
 

A:Reinstalling Windows XP

If you have a retail version of windows Xp, you could reinstall windows XP over itself. But you will have to reinstall the windows updates. I would suggest to uninstall firewall, antivirus and burning software before performing the steps just to be safe with the install.

See:
http://www.michaelstevenstech.com/XPrepairinstall.htm
 

https://forums.techguy.org/threads/reinstalling-windows-xp.206816/
Relevancy 38.7%

I made a terrible mistake. Rather than go into details sufice to say I used my original disk and reloaded windows. I want to go back to my original windows. I have a folder called "windows.old" that contains all my old files. How do I replace my installed windows with the old folder?

A:Reinstalling Windows.old

Hello Bill,

You might see if this may be able to help.

Windows.old folder - Restore into a new installation

http://www.sevenforums.com/installation-setup/396986-reinstalling-windows-old.html
Relevancy 38.7%

So I got the Windows 7 Disc and I tried to follow the clean Isntall but it is saying I need an administrative password and I dont have it is there a way to run it so I dont need it?

A:Reinstalling Windows 7. How Do I Do it?

You need to boot the disk to install following these illustrated steps to Clean Reinstall - Factory OEM Windows 7. The steps are the same for retail.

It would not ask for a password if you were correctly booting the DVD: How to Boot your Computer from a Bootable CD or DVD

http://www.sevenforums.com/installation-setup/230991-reinstalling-windows-7-how-do-i-do.html
Relevancy 38.7%

Have a Compaq Presario Model TU running Windows XP Pro SP I want to re-install Windows due to recent virus amp spyware attack When I reboot the laptop woth the installation disc in it goes thru the XP Reinstalling Windows normal checking etc but when I get to the part to reformat the drive it come up with a message that the harddrive Reinstalling Windows XP cannot be located and with a message to check to Reinstalling Windows XP see that there is power to the harddrive There is harddrive there and it is working as I am still using the computer Further the computer came with Windows XP Home already installed and a recovery partition I recall that after I got the computer I tried to make a recovery disc but was Reinstalling Windows XP unsuccessful Anyway did install Windows XP Pro over the home version Well have tried to use the PC Recovery program but cannot locate the partition It is there in the D drive Any clues as to how to reinstall Windows XP Pro or to access the recovery file to load XP Home version I have tried restoring to the earliest restore point but it did not help HELP

http://www.techsupportforum.com/forums/f10/reinstalling-windows-xp-281435.html
Relevancy 38.7%

Okay so I just purchased a new laptop with Windows installed on it and then I wanted Ubuntu installed alongside it Well after the Ubuntu installed I found that I was no longer able to access Windows It is listed in the list of OSes on the Grub bootloader screen but when I select it it flashed a blue screen super quick then restarts I downloaded and burned a Windows recovery disc but it was like it couldn't even find the Windows operating system at all I know that the files are all still there because I can access them from Ubuntu but I am just not able to boot into Windows Is there any way that I can reinstall it for free since I already had it installed on the new laptop or is my only choice to purchase a new Windows installation disc and reinstall it from there Or is it just a matter of fixing the Windows MBR I don't know if that would work if it seems that Windows isn't even technically still installed on my system

A:Reinstalling Windows 7?

Your new laptop should have a "Factory Recovery" partition on it (unless you deleted it to put Linux in it's place) and the user manual should explain to start the factory recovery process. This will re-install Windows 7 as it was when new.

http://www.techsupportforum.com/forums/f217/reinstalling-windows-7-a-575318.html
Relevancy 38.7%

sorry i dont know much about computers
why is that i only have 588GB free but i have 698GB total?

A:after reinstalling windows 7

You have a 750GB HD.

Whats the problem?

http://www.sevenforums.com/general-discussion/82118-after-reinstalling-windows-7-a.html
Relevancy 38.7%

A couple of days reinstalling windows xp ago my computer starting looking and acting weird it is like the operating system went back to the old ages all tool bars are gray and when i go to the start menu where it would normally say windows xp in the side there is nothing I had a friend come over to look at it and when they go to run msconfig there is and error message stating reinstalling windows xp MFC u dll is not install reinstalling may fix the problem so I did a search online about it and there was a site that i could download it from but couldn t get my computer to download so I went to work and burned it to a cd rom and brought it tryed to get it on y computer that didn t work either After trying all this i tried to wipe my computer clean and reinstall I went into the BIOS and and set it so the cd rom is the forst thing to boot and then tried reinstalling the window xp cd provided by dell with my computer it is still unable to reinstall is the root of the problem the MFC u dll thats missing please help nbsp

Relevancy 38.7%

Win 10 upgrade failed and I tried to restore my Win 7 from CD from hp.   No games were installed.  Why?

A:Reinstalling Windows 7 Pro

Hi: The bundled games that come with W7 Professional are turned off by default. No doubt because folks are supposed to be working during working hours, and not playing games on an operating system designed for corporate use.   To install the games, go to the Control Panel>Programs>Turn Windows Features on or off and check the games box. Within a couple of minutes, the games will be installed.

http://h30434.www3.hp.com/t5/Notebook-Operating-System-and-Recovery/Reinstalling-Windows-7-Pro/td-p/5599776
Relevancy 38.7%

Hi all, names john and i have a dell optiplex gx 400 and was wonderin if any one new how to do an install of xp home after wiping the system clean. do i have to make a partition and if so, how would i go about it. a piont toward a tutorial would be the ultimate blessing....and thanks to anyone who can help me out. god bless!!!

A:Reinstalling Windows

Turn the unit on and put the XP disk in the drive.
Leave the disk in the drive and restart the unit,
Watch the screen for a message that says "Press any key to boot from CD,
Press a key on the keyboard,
Wait while it goes through starting from the disk,
[You may have to press F8 during startup to accept the EULA]
When you get to the screen with the box that shows the current version of XP installed press "D" on the keyboard,
Press "Enter"
Press "L"
You now should have a screen asking what file system you want to format to, NTFS should be selected by default,
Press enter,
The disk will be formatted and the installation will automatically begin when the format is finished,
During the installation the computer will restart DO NOT press a key to boot from the CD again !
At that point the unit will boot from the hard drive and continue the installation.
After awhile you will be asked to "name" your computer,
I suggest naming it the same as the main user ID.
[Example, I have an XP unit named "testbox" the user name is also "testbox"
You will be asked if you want to turn on automatic updates, select NO or Not now,
You will be asked if you want to setup a network connection, click on skip,
You will be asked to enter a user name and password,
Enter the same name you used for the unit ,
Only enter a password if you want to have to log on every time XP starts,
[If you have more then one user you can enter passwords later]
Follow the prompts to finish.
When you get to the desktop the only icon showing will be the recycle bin
Click on the "Tour XP balloon [or icon in the taskbar by the clock] and click "Cancel"
Go to Start>Control Panel,
Double click "Taskbar and Start Menu"
Click on the "Start Menu" tab
Put a dot in the circle by "Classic Start Menu"
[That will put the icons on the desktop]
Click OK
Double click on "Folder Options"
Click on the "View" tab
Go down the list until you find "Show hidden files and folders"
[for future use]
put a dot in the circle by it
Click OK
Close the Control Panel
Double click on "My Computer"
Right click on the "C:" drive
Left click on "Properties"
Click on the "Tools" tab
Click on "Defragment Now"
Defrag the drive
When you are done start installing your other programs and applications
[Defrag again when finished]
When they are installed if you have the "activate XP" notice do the activation,
When you have gotten this far either go to Windows Update and do the updates or go to "My Computer" and right click on it
Left click on "Properties"
When the box opens click on the "Automatic Updates" tab
Put a dot in the circle next to "Automaic [Recommended]
Click OK.
In order for the Automatic Updates to begin right away turn the unit completely off then restart it.

http://www.bleepingcomputer.com/forums/t/231511/reinstalling-windows/
Relevancy 38.7%

Firstly apologies if this thread is not in the correct sector not entirely sure where to put this Hallo I'm planning on re-installing Windows on my Asus K CA running Windows Now the problem is that I'm not entirely sure which to use quot Remove everything and reinstall Windows quot says that it'll remove EVERYTHING which means it'll take away all the programs and media after the process quot Refresh your 8.1? Windows Reinstalling PC without affecting your files quot says that Reinstalling Windows 8.1? it'll keep the files However it says that if your PC isn't running well Now obviously I wouldn't want to lose media content and the likes in the process so Refreshing will be the option Question is will it be effective Say for example if it would do the same job as option minus the file removal Also what would happen after since this came pre-installed with W and I just upgraded to and I also have themes installed rd party Thanks in advanced Xian

A:Reinstalling Windows 8.1?

I have done a refresh.
I lost programs & stuff.

Better to backup programs & files on USB to reinstall after refreshing or returning to factory specs.

http://www.eightforums.com/installation-setup/58458-reinstalling-windows-8-1-a.html
Relevancy 38.7%

Hey everyone, I have recently tried to install Windows XP. But, when it gets about halfway through installing it tells me that there is something that they recommend I do not install. I click ok and it continues installing. Another window then pops up telling me to click ok to proceed to find something but, my mouse and my keyboard will not work and I cannot click or do anything. It seems as though it shuts the power off to the usb ports of something. Anyone know how I can fix this? I also have a Dell XPS 400.
 

Relevancy 38.7%

Hello, my laptop came with Vista, I upgraded to Windows 7 (using acer's upgrade disc), but I want to reinstall Windows 7 but I'm not sure if it will work, does anyone have any idea about this?

I only have the upgrade disc and the format drive (rather than keep a copy of /users directory).

Also, if I do this I'll need to reinstall office 2007, will my key work again? (This is my third install with it).

A:Reinstalling Windows 7

Fortunately the Upgrade Kits have a clean copy DVD of Win7, so you can back up your files, boot from the DVD, select Custom install, use Drive Options (advanced) to delete all partitions, create New as you wish, then format before Installing to first partition.

Any Vista recovery partition is disabled when Win7 installs so you can delete it. If you failed to make your Recov disks first, try tapping the key given for Recovery on first bootup screen. If it doesn't start recovery then that is just wasted space.

The installer is mostly driver-complete, with more arriving soon in Windows Update. Any drivers missing in Device Manager can be found on the Acer driver/apps CD included in the kit, along with favorite apps you want. Others can be found on the Acer Support Downloads webpage for your model.

As with Win7 on your laptop, you own the copy of Office for life and can reinstall it as often as you wish as long as you save the key. Make of copy of the CD or extract the .iso using ImgBurn to backup.

When complete, save a WIn7 backup image to a primary partition and externally so you never have to reinstall again, just reimage the HD or a replacement using the Win7 DVD repair console.

http://www.sevenforums.com/installation-setup/52294-reinstalling-windows-7-a.html
Relevancy 38.7%

Well I am running Windows on a Help Reinstalling 7 Please Windows laptop that is not even a year old yet About amonth ago I had finished up a paper went to class and when I came back my virus scanner said it had detected and deleted a virus The only problem was neither IE or FireFox would work luckily though IE bit did work After amonth of trying to fix my computer I feel I have only made it worse and just want to reinstall windows which Help Reinstalling Windows 7 Please I thought would be an easy task from what I have read When I go to make a backup disk my computer takes about hours and only get about of the way done so I decided to say forget that Now when I go to reinstall windows I get to the point where it says insert windows reinstall disk After I put it in I get an error error x e and it says that im missing something I need Also sometimes my computer will give me this message right away and sometimes it takes any from hour to hours to give me this error but I have never been able to get to the setup screen If anyone can help your help will greatly by welcomed Thank You

A:Help Reinstalling Windows 7 Please

Did you try to reinstall from the recovery partition? What is the make of the PC.

http://www.sevenforums.com/installation-setup/129348-help-reinstalling-windows-7-please.html
Relevancy 38.7%

okay now I have done it I my computer keeps hanging on boot up It will try to load xp but then reinstalling xp windows just hangs for a minute and then resets itself If you try safe mode vga boot logging what is this anyway last known good configuration that works ARGGGGH When you try these options it goes to a black screen asking which reinstalling windows xp OS to load and then freezes my OS is the only one in the list My big problem is that I don t have the master disc any more so I bought a new Windows disc from Best Buy which I think now is only an upgrade disc from say WIN to Win XP and I had to replace my cd-r reinstalling windows xp a few months ago When I try to go into the BIOS to change the boot up order I have a little exclamation mark beside reinstalling windows xp my cd-r When I put the cd in it will try to read it but then the screen goes black and it resets itself again i have tried using the boot up disks from here http www microsoft com downloads familyid e fe - e f- c-b -bd afee d but when I try to use them and get to the fifth disk out of six it says the file is corrupted and every time I have to insert a disk while creating them on a different computer it says the file is in use by another process Not sure if I even need this though Maybe someone could show me how to delete create a new partition perhaps I have already lost all of my files so a new OS is the only way I know to go Someone PLEASE HELP and thanks in advance for everyone s help nbsp

Relevancy 38.7%

I have created a Disk Image on an external HD using Windows 7 restore process.
If a need arises, will I be able to boot of the external HD to restore Windows 7.
I did not use DVDs because the size of the image was around 60GB which would take a lot of disks.

A:Reinstalling Windows 7

You should be able to restore the Full System Image from the Repair/Installation disc. If you don't have an installation DVD or repair disc, be sure to create one first: System Repair Disc - Create

http://www.sevenforums.com/performance-maintenance/63987-reinstalling-windows-7-a.html
Relevancy 38.7%

Four weeks ago I wiped my hard drive clean and reinstalled Windows XP, and managed apparently to create a second? partition. At that time I had 625 of my drive space free after the reinstallation. By yesterday my free space was down to a little less than 10%. A friend suggested that I try reinstalling Windows again. I did and am currently showing 32% of my hard drive is free. I know virtually nothing about partitions, and never knew I had one before going through this a month ago. Is there an easy way to delete the partition(s) and regain more of my drive's space back?
 

Relevancy 38.7%

Hello, I recently had a series of events which has led me to decide to reinstall Windows 7. However, I do not have the CD so I am using an ISO USB. I want to reinstall, but keep all of my files, but I can not find out how to access the USB. I have tried changing the BIOS, but then found that this did not work. Does anybody know how to access an option to reinstall windows using an ISO on a USB?

A:Windows 7 Reinstalling with USB

Did you make the stick bootable or just copy an iso to it?

http://www.bleepingcomputer.com/forums/t/517439/windows-7-reinstalling-with-usb/
Relevancy 38.7%

I've recently purchased an SSD and would like to utilize it as a boot drive. I am happy with my configuration and would like just to install Win7 on the SSD and use it to boot -- with all other hardware and drives remaining without change. Is that possible? If so, would you please provide some guidance. Thanks

A:Reinstalling Windows on a New HD

Hello.


If you just add the SSD and install an OS to it and don't remove the old OS Windows will configure a dual boot between the 2 separate Operating Systems and that will have to be dealt with.

The best way to go is to disconnect the Hard Disk Drive with the "older" OS on it and then add the SSD and connect it to the #1 SATA port on the mobo and set it as the second boot device after the CD/DVD drive in the BIOS and do a clean install to the SSD as usual.

How to Do a Clean Installation with Windows 7


Then when the "new" OS is booting and all is well, power down and reconnect the other HDD to deal with the older OS at will; be sure to post back with any further questions you may have and to keep us informed.

http://www.sevenforums.com/installation-setup/130375-reinstalling-windows-new-hd.html
Relevancy 38.7%

I wish my Windows reinstalling windows xp updates even worked at the snails pace others are having I had created a thread Windows Update has died to detail my Window Update woes From what I am hearing here other than reinstalling windows xp the cases where people are having no problem whatsoever is that even if I get Windows Update to work with a cumulative update the next month it will fail My fear is that this is going to continue through April when XP is retired In fact I don't even remember the last time I had Windows Update work in this computer I only became aware of this problem when my brother-in-law gave me his Vista Ugh computer which I will upgrade to Windows and I would also do that for my xp computer but Windows Advisor showed a lot of incompatibilities and Windows update came up automatically I see a lot of people having all kinds of problems with Windows Update and it's pretty sad that Microsoft can't get this rigtht especially on a platform about to retire

A:reinstalling windows xp

Talk about irony! Here I am bleeping about Microsoft not fixing the Windows Update issue and 5 minutes later, I see Doug's post here that it's fixed. In my case, I can't even get the cumulative update to download and save so I hope repairing the BITS file will help. I'll read on and try the fix Doug posted.

http://www.bleepingcomputer.com/forums/t/519023/reinstalling-windows-xp/
Relevancy 38.7%

I need to reinstall my windows because a keyboard problem(the little "a" dosnt Work) And I need to reinstall it without loosing Any data in my system Partition...

Its any Method to do that

ps.(im Writing the "a" key with Copy-Paste

A:Reinstalling My Windows

Don`t re install windows because your A doesn`t work, just buy another keyboard.

http://www.sevenforums.com/installation-setup/364019-reinstalling-my-windows.html
Relevancy 38.7%

Hi,

I have a Windows laptop that came with originally windows 8, but then I had a friend put a copy of Windows 7 on. It worked pretty well but now I'd like to switch back to Windows 8. Am I able to do that?

Thanks
Brad

A:Help on reinstalling Windows 8

Have you made the OEM manufacturer's Recovery Disks?

   Information

We always assume you have made your Recovery Disks using the OEM manufacturer's Recovery Media Creator app the first day you had your new PC.
& made the Startup Repair CD. (Windows 8 only)
Recovery Drive - Create with USB Flash Drive in Windows 8
System Repair Disc - Create in Windows 8 (Windows 8 only)




I would recommend you making the OEM manufacturer's Recovery DVD's or USB drive.
or
You can order the Microsoft official OEM Recovery disks from the OEM manufacturer's website.

http://www.eightforums.com/installation-setup/43586-help-reinstalling-windows-8-a.html
Relevancy 38.7%

My Fujitsu-Seimens laptop was very slow and had no space left on the hard drive. It was suggested that i reinstall XP. This I have done but some programs remain on the hard drive and there is only just over 3gb of 30gb left on the hard drive. Wat can i do? rienzavan
 

Relevancy 38.7%

Dear Friends,

My computer has gotten so crudded up that I've decided to reformat my C: drive and do a clean reinstall of Windows XP and SP 2.

Does anyone have the step-by-step details? I want to touch all bases.

Regards,
Jack Owens
 

A:Reinstalling Windows XP

http://www.michaelstevenstech.com/cleanxpinstall.html
 

https://forums.techguy.org/threads/reinstalling-windows-xp.359288/
Relevancy 38.7%

OK I need some help reguarding the reinstallation of Windows XP.
1. Is it legal if I use other CDs or downloaded files to install windows XP as long as I use my current/old product ID? (yes I have it) And will windows update be ok with me doing this?

2. How would I go about installing/uninstalling windows? I downloaded the XP files but would I be able to install it using windows and switch between them somehow? (have both till I delete 1) Also, is there a way to order the CDs or something without buying a new product ID?

3. Anybody know of a good/free CD burner program I can use for the transfer?

4. I need all the important info you can give me reguarding the reinstallation of Windows XP.
 

Relevancy 38.7%

I plan to reinstall windows 7 (it's an upgrade version from windows vista, provided by acer), I have MS Office 2007 installed.
Do I need to keep any serial numbers/product keys from my current install or will the keys that came with the discs still work?
 

Relevancy 38.7%

split from http://www.techsupportforum.com/f10/...xp-255359.html

Dear friends I have a similar problem, when I have format my Pc, and whe windows install must run, I have seen the same thing: \windows\inf\biosinfo.inf (Window could not start because the following file is missing or corrupt C:\Windows\infbiosinfo.inf). I have tried to enter and copy in recovery console like said justpassingby, but I have the same problem and I don't know what can I do,

I have a Windows XP SP1 (original and bought in CD), Pentium 4 2.00 Ghz, 256 Ram, 40 Gb HD Seagate 5400 rpm. Before format my PC I had installed Service Pack 2 and I'm not sure Sercive Pack 3.
Please I need help because I can't install windows.
Thank's you very much.

http://www.techsupportforum.com/forums/f10/need-help-reinstalling-windows-xp-296428.html
Relevancy 38.7%

Hey,

a while back I had my computer fixed by a technitian and he had written me this note:

"If you ever re-install Windows, you will have to use a fake SCSI controller driver to foul windows into using the Highpoint controller".

This was written because apparently the ATA chip on my board was damaged, but he worked around the problem by routing my HD through the highpoint ATA66 controller. On the bootup screen my HD doesnt show up but it does show up on the second screen which is the highpoint controller screen (this is what the guy had written down for me)....

I desperately need to reformat because my computer is so slow...I was wondering how i can format and reinstall windows with the instructions that he left me....thanks
 

A:Reinstalling Windows

nasty_b said:

I desperately need to reformat because my computer is so slow...I was wondering how i can format and reinstall windows with the instructions that he left me....thanksClick to expand...

Reinstalling windows and reformatting aren't the same thing. Also, why is your pc slow? What makes you think a reinstall is necessary? Run CCleaner, MS antispyware, and zone alarm filewalker. See what happens to your performance then. Afterwords, a defrag may be in order. Check. post back.
 

https://forums.techguy.org/threads/reinstalling-windows.364846/
Relevancy 38.7%

got a problem... had a friend try fixing his puter by reinstalling windows over the top of original copy, except for the fact he was in safe mode when he did this, it would of been fine... problem is it wont install under safe mode, and is in the middle of the reinstallation mode, but will not finish because of being in safe mode... can someone please tell me how to fix this problem.. right now it is in the restart part of the install and will not boot

A:reinstalling windows xp

is this win xp ?

if so then leave the instalation disk in

shut down the pc /restart / when it ask to boot from the cd press a key then install windows let it run until it ask if you want to do a fresh install follow the instructions you can also deleat the older install if you read carefully then have a fresh partion

http://www.techsupportforum.com/forums/f10/reinstalling-windows-xp-172301.html
Relevancy 38.7%

I was prompted to start a new thread; I trust that this is the correct area.
I have Windows 7 installed on a SSD, Data on hard drive.
I am experiencing severe instabality problems, considering formatting drives and starting over, this wil be a huge task considering the amount of data involved, I have two questions;
How important is it to disconnect the HD when reinstalling Windows on the SSD?
If I were to reinstall Windows over the top of the existing setup, would I still have to disconnect the HD?

A:Reinstalling Windows 7 on SSD

It should not be a huge task at all, if the data is on the hard drive, which is where it should be.

Disconnect the hard drive and re install windows on the ssd, make sure the ssd is setup properly.

Align it.

A windows install takes 15 minutes from start to finish, it`s no big deal. Get it right now

SSD Alignment

Clean Install Windows 7

You DO NOT FORMAT a data drive.

http://www.sevenforums.com/installation-setup/357238-reinstalling-windows-7-ssd.html
Relevancy 38.7%

Ok so i recently upgraded from Windows Vista (x64) to Windows 7 (x64)...i did everything online so i never got any installation discs. So now i want to completely restore my computer but i obviously still want to keep windows 7. I want everything back to "factory settings" but i don't want to lose Windows 7. SO...can get windows 7 installations disks from Microsoft for free? If not can i restore my computer to factory settings then re-upgrade to 7 for free?

THANKS!!!

A:Reinstalling Windows 7 (HELP)

You need the Win7 DVD for reinstalls and repairs. Order the DVD from MS using your purchase receipt at the 800 number Customer Service number on the site you bought it.

If you can borrow a DVD to copy, or otherwise download it, all versions are included in the installer but hidden due to the presence of an ei.cfg file in Sources folder. Extract files, delete file, recompile into ISO to burn All-Versions DVD using this: Bootable ISO - Create from Installation Files You can burn the DVD from the same drop down menu where ISO is created.

Then boot the DVD, choose your licensed version, insert the key and clean install. The Upgrade version DVD will scan the HD, see the installed OS (which can be existing Win7), and allow Upgrade version key. You can then use Custom>Drive Tools to delete partitions, create new ones as you wish, and format before install.

Clean Install with a Upgrade Windows 7 Version

http://www.sevenforums.com/installation-setup/61949-reinstalling-windows-7-help.html
Relevancy 38.7%

Hello I recently built a new computer system that contains my old HDD which I transferred from my previous PC The old copy of Windows that was already installed didn t work in the new PC as expected Instead I have a new copy of Windows available that Onto Reinstalling New PC Windows I need to get on the HDD But I also need to deal with the old Windows copy I ve already transferred all of my personal files from the old copy onto a portable Reinstalling Windows Onto New PC HDD for safe keeping What I plan on doing is reinstalling the new copy of Windows onto the PC s HDD to be used in the new computer I was able to acquire the new Windows version for a really cheap price from my college So now I either have to format my HDD so that the new Windows can work properly while keeping the old useless version out of the way or wipe the old Windows from the HDD completely Should I keep the old Windows on the HDD and just never use it or would that conflict too much with the partition used by the new version If they do conflict how should I go about removing the old Windows partition P S - dealing with the HDD and OS seems to be one of the most annoying parts of a PC nbsp

A:Reinstalling Windows Onto New PC

As long as you have your files backed up,you might as
wipe the partitions off the drive so you can use all the space.
Make sure you have the drivers for your hardware.
Boot to the windows 7 DVD and start the installation.
At the partition selection screen,click more options.
Delete all the partitions on the drive.
Create a new partition the full size of the drive.
Format it and continue the installation.
You can do all that from the partition selection screen without
having to restart the computer.
 

https://forums.techguy.org/threads/reinstalling-windows-onto-new-pc.1060867/
Relevancy 38.7%

OK, so I'm going to go out and buy a 40GB hdd to replace my current one that I'm running Windows XP off of which is about 1.3 gigs. I need to know what will happen when I replace my old hdd with my new one when I try to reistall windows on there. Will I run into any problems since I already registered my copy of windows on my old hard drive. And theres no way I can keep running my current hdd as my main drive and using my new one for the mass of my file storage since a lot of programs I install need to put stuff onto the drive windows is on, and also I need 500mb free on the drive windows is on so I can burn CD's with the XP interface.
 

A:Reinstalling Windows

The new hdd should come with some sort of utility that you can use to copy the files from the old hdd to the new. You shouldn't have any problems with XP activation, but if you do, the people at Microsoft should understand.
 

https://forums.techguy.org/threads/reinstalling-windows.128711/
Relevancy 38.7%

I seem to have lost some vital links in my system of Windows' Help files (XP Pro). Is it possible to reinstall just the Help files (rather than starting all over again)?
Thanks.
 

A:Reinstalling Help in Windows XP

See if This thread can help you
 

https://forums.techguy.org/threads/reinstalling-help-in-windows-xp.129879/
Relevancy 38.7%

Computer is Athalon 1.4 512 megs DDR memory
Shuttle Motherboard
Went to reinstall Windows. It gets to the point where it is initalizing driver database and goes no farther. It just sits there. If you reset it goes to Scandisk and hangs there.
I have checked out the har drive, alternatly removed the dimms and flashed the bios.
Any sugestions
 

A:Windows Me reinstalling

How long did you let it sit?...had several machines sit for almost 30 minutes at that point then suddenly start working again....

Try this link....

http://support.microsoft.com/default.aspx?scid=KB;en-us;q268891

last resort may be a full format and try again.
 

https://forums.techguy.org/threads/windows-me-reinstalling.106946/
Relevancy 38.7%

I am planning to wipe my drive and install a clean copy of Windows XP on my Gateway computer. My thought is whether or not my Gateway recovery disk containing the pre-installed OS will be able to successfully install Windows from a "clean" hard drive. Any idea? Thanks.
 

A:reinstalling windows xp

Slip that recovery CD into your CD drive and see what options it offers. Options will probably include format the disk and do a clean install. (You can simply exit without doing anything; i.e., looking at the disk does not commit you to taking any action.)
 

https://forums.techguy.org/threads/reinstalling-windows-xp.351026/
Relevancy 38.7%

I just recently wiped my hard drive and i went to reinstall Win Xp...everything seemed to go alright... until it tried to finish the set up process...an error stating:

sys.dll:symtax error in manifest or policy file
D:\1386\asms\1000MSFT\WINDOWS\GDlPLUS.MAN
on line 4

Error Installation Failed
D:\1386\asms.

Error message..incorrect function

I dont know what that means..???? I have wiped hard drives b4 and installed Win98 but I am at a standstill with XP ...I always thought that installing windows was the easy part...can someone help me and tell me what to do to fix this. Thanks
 

Relevancy 38.7%

Recently my copy of Windows XP as been acting up so I decided to reinstall it only to realize that the company that provided my PC never gave me a copy of the disk or anything regarding Windows installation. I looked around and found out that the i386 directory on my hard drive is a copy of the installation disk. Also my computer provider never gave me the activation code. So my questions are,
1. Is there anyway I could burn the i386 onto a disk and use it reinstall XP?
2. And I could would I need my activation code to make my system genuine?
Thanks!
 

Relevancy 38.7%

Not sure if this is the right forum but here goes.

My computer has a ton of viruses and I want to do a clean reinstall of windows 7. My computer originally came with Vista but a year later I upgraded to 7 Home Premium. I upgraded by buying a product key (no disc) from the Microsoft website and downloading some file/application to install 7. I cannot find this file nor can I find anywhere on the Microsoft website which would allow me to download it again. Any help?

A:Reinstalling Windows 7

Yep.

You can borrow a disc from a friend and use your key.

Or you can use your Google-fu to find the ISO online and burn that ISO to a disc.

Hint: My Digital Life

http://www.sevenforums.com/installation-setup/198597-reinstalling-windows-7-a.html
Relevancy 38.7%

Ok I Need Some Help

My problem is that i wanted to reinstall windows xp pro on my pc. I start the reinstallation of it, didnt have a problem, loaded pushed F6, loaded the proper drivers and such, however after that is when i get lost, because i get this screen: http://www.dennisneuhaeuser.de/howtos/stop0x7b.gif

i dont know what to do from here, i have already ran chkdsk /f, ran countless virus scanners, uninstalled almost every program i have, i have run out of ideas

Does anybody know what i can do?, Can anybody help me?

Thanks,

Kronoss88

A:Need Help With Reinstalling Windows

This may help you http://support.microsoft.com/?kbid=307099&sd=RMVP

http://www.techsupportforum.com/forums/f10/need-help-with-reinstalling-windows-105327.html
Relevancy 38.7%

ok so I managed to successfully install all cds that were send to me windows reinstalling xp help for reinstalling my windows xp I get to this point where it looks like im able to use my computer but I see windows open majorly one of them called quot System restore tool V quot or something like that which says quot will put an end to user quot or something I don't reinstalling windows xp help reallt recall It has the options quot Factory quot and other and I'm really confused on what to do Also on the top left corner of the screen is this little bar that just sits at for some reason Please help I'm confused ps if it helps before all this happens it put me in a blue screen that said quot please be patient as this is a one step process quot - quot do not turn off or restart your computer during this time quot - quot ignore any pop up messages until you are promted to restart or shut down quot which in the last one I never am It just takes me to what I previously said with the system tool thing quot

A:reinstalling windows xp help

11 Cds?? Really?!? Because the Windows XP installation files can easily fit onto one 700mb cd. Vista comes on a single DVD, which is about 7 cds.

Where did you receive these cds from, xp ought to be a straight forward installation?

http://www.techsupportforum.com/forums/f10/reinstalling-windows-xp-help-374690.html
Relevancy 38.7%

Recently ive had a problem with a system i built myself. The SSD i bought completely failed and there is no hope of recovering the data that it held. Trouble is this SSD held my copy of windows 7 and it was an OEM version. I want to know if there is a way to deactivate the copy that was on the original SSD so i can install it fresh onto a new HDD. Is it possible to do this? if so how do i go about doing so?
any help will be greatly appreciated :)
thanks

A:Reinstalling windows 7

and welcome to the Forum

No need to deactivate . . you may have to call Microsoft to activate the new installation, but it is a quick and easy call . . just tell them what happened

http://www.techsupportforum.com/forums/f217/reinstalling-windows-7-a-617757.html
Relevancy 38.7%

Ive recently been infected with the infamous nimda worm. When my virus scan/spyware blockers did nothing to fight it, I turned to the option of reformatting my computer. After reformatting I was unpleasently surprised to see the worm unload itself and burrow on the first start up. I tried reformatting again, this time using the destructive reformat option (deleting everything and restoring back to factory shipped settings). However, the reformat was unsuccesful and windows was not completely installed, preventing my system from even starting up. My system recovery files are kept on a seperate partition on my hard drive, not a disk. Is it possible the nimda worm spread to that partition and infected those files? If so, is there any way i could go about recovering that drive? or will I be forced to buy disks and reinstall my OS in that manner?


Help is very much apreciated

A:Reinstalling Windows XP

Propably you'll have to scan machine from livecd :
http://downloads1.kaspersky-labs.com...escue_2008.iso
Download, burn and boot from it.

http://www.techsupportforum.com/forums/f10/reinstalling-windows-xp-370872.html