Windows Support Forum

BSOD A clock interrupt was not received on the secondary processor

Q: BSOD A clock interrupt was not received on the secondary processor

I keep getting a BSOD with the message "A clock interrupt was not received on the secondary processor". Its really starting to annoy me now and would really appreciate any and all help. I have been through the forum here to see if there's any suggestions but I would really appreciate some direct advice. Please help.
Thanks

Relevancy 100%
Preferred Solution: BSOD A clock interrupt was not received on the secondary processor

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: BSOD A clock interrupt was not received on the secondary processor

Welcome to SevenForums.


Code:
0: kd> !sysinfo cpuinfo
[CPU Information]
~MHz = REG_DWORD 4549
Component Information = REG_BINARY 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
Configuration Data = REG_FULL_RESOURCE_DESCRIPTOR ff,ff,ff,ff,ff,ff,ff,ff,0,0,0,0,0,0,0,0
Identifier = REG_SZ Intel64 Family 6 Model 45 Stepping 7
ProcessorNameString = REG_SZ Intel(R) Core(TM) i7-3820 CPU @ 3.60GHz
Update Signature = REG_BINARY 0,0,0,0,5,7,0,0
Update Status = REG_DWORD 2
VendorIdentifier = REG_SZ GenuineIntel
MSR8B = REG_QWORD 70500000000

Processor may be overclocked!
Expected Frequency: 3600
Actual Frequency: 4549
Overclock Ratio: 1.26
Please remove all overclocks applied.
If you have any more bugchecks after doing so we are here to help .

http://www.sevenforums.com/bsod-help-support/298925-bsod-clock-interrupt-not-received-secondary-processor.html
Relevancy 123.69%

Hello My name is Anderson First of all apologies for my info inside the zip file is mixed in with Portuguese its the language my computer is on About half a month ago i started getting blue screens while trying to play games which started to happen more and more often to anything i did on a random time period after some research a a received interrupt clock secondary was on processor BSOD not and the use of BlueScreenView i managed to locate the problem which was a driver for the ethernet which was out of date and solved it and for a whole month-ish i could again BSOD a clock interrupt was not received on a secondary processor play any game and do BSOD a clock interrupt was not received on a secondary processor anything without BSOD a clock interrupt was not received on a secondary processor a sign of the blue screen but yesterday when i turned on my computer i was asked to update my graphics driver AMD which naturally i did but a few moments after that while playing games the same blue screen came back to haunt me But this time there were no minidump files at all i tried searching for a solution for minidump files not being created in this website and so far nothing has worked Could someone give me a hand P S i hope the mixed languages in the files arent too much nuisance P S S the text on the blue screen showed quot a clock interrupt was not received on a secondary processor within the allocated time interval quot

A:BSOD a clock interrupt was not received on a secondary processor

Sounds like your processor is overheating. I suggest installing a hardware monitoring program such as HWinfo. Google it, it's a free program. Keep an eye on your cpu core max temps. The core temps are what is important, not the cpu temp. If that is the case, then you need to open your pc and check to see if the fan is working when it is turned on. If it is still working then I suggest you check to see if the fins on the heatsink are clogged up with dust, if they are, you can either get a can of air and blow them out(which is what I suggest) or do it manually, however I must caution you that if you do it manually that you must be very careful to make sure that you have discharged any static electricity on your person before doing so, you can do this by touching the back of your power supply while it is plugged in, just make sure to touch the metal part of it.

http://www.sevenforums.com/bsod-help-support/358775-bsod-clock-interrupt-not-received-secondary-processor.html
Relevancy 123.69%

hi all
i keep getting this BSOD at least once a week even with this fresh install of windows 7 home
"A clock interrupt was not received on a secondary processor within the allocated time interval" same thing every time
it only happens in battlefield 4 but a couple of times the game has crashed in counterstrike .but only BSOD in bf4.
i have tried the intel diagnostics tool and it passed and prime 95 and 3dmark with no problems.
i have a dump file from the 16/08/2016

pc spec
i7 6700k (never overclocked)
gigabyte z170 gaming k3 ( f2 bios)
16 gb corsair 3000mhz vengeance ddr4
gigabyte 980ti extreme
kraken x61 cpu cooler ( with cam software )
2x 240gb ssd
evolabs 80 plus bronze 850w psu

any help advice would be appreciated thanx

http://www.sevenforums.com/bsod-help-support/400059-bsod-clock-interrupt-not-received-secondary-processor.html
Relevancy 123.69%

I built interrupt 101 A BSOD - a secondary was received on not clock processor this computer back BSOD 101 - A clock interrupt was not received on a secondary processor at the beginning of and I started getting this same blue screen error quot A clock interrupt was not received quot about once every other week since the beginning of last year I investigated it a little here and there but have found no solutions Unfortunately there isn't a situation that can consistently reproduce this error It began as a Windows XP machine then I upgraded it to the retail version of Windows bit as soon as Windows was released and I did a clean install of Windows back in October The clean install didn't help The only hardware changes were adding an extra stick of RAM added in the middle of last year and a new graphics card which was added a couple months later These errors were occurring before the hardware changes My BIOS is up-to-date and all my drivers are as well I've done a Memtest over night which reported no issues a CPU test with Prime which also reported no issues and a video card test with FurMark for extra measure no issues there either So I'm really at a loss Attached is my BSOD dump only going back to October from when I did a clean install and system file collection along with my system health report and my system specs Any pointers as to figuring out the culprit of this problem would be greatly appreciated

A:BSOD 101 - A clock interrupt was not received on a secondary processor

maybe bumping your vcore voltage up just a bit will help. or just wait till someone can read the BSOD dump for you.


scrooge

http://www.sevenforums.com/bsod-help-support/210666-bsod-101-clock-interrupt-not-received-secondary-processor.html
Relevancy 123.69%

hello again axe0
after you solved the last problem (it was the mouse)
i thought everything was fine until sunday then bsod again..
but this time as it crashed all i could hear was the fans blowing , from the kraken x61
i felt the top of the pc case where its exhausts from and it was very hot.
once i rebooted pc an tried gaming again the cooler was back to normal.

thanks again for your time

http://www.sevenforums.com/bsod-help-support/401491-bsod-clock-interrupt-not-received-secondary-processor.html
Relevancy 123.69%

I have recently been getting seemingly random BSOD's on my machine stating that a "Clock Interrupt was not received on a secondary processor" I am not overclocking and in fact have even disabled 'turbo' in my BIOS but am still getting these lock ups. Nothing has changed in my hardware configuration recently and would really appreciate any help. Thanks SO much in advance! (I have attached the dm collector file to this post)

A:BSOD: A clock interrupt was not received on a secondary processor

Your Windows installation appears to be invalid--ASUS OEM SLI on a custom motherboard.

http://www.sevenforums.com/bsod-help-support/370307-bsod-clock-interrupt-not-received-secondary-processor.html
Relevancy 123.69%

I have had a fairly stable system until I decided to leverage 8gb of ram and 64bit through Windows 7. Now daily or more I get greeted with this consistent error that from reading in the various help sites could be one of a million things.
I have tried:
cleaning extensively with Spybot seek and destroy, avast and Prevx. All programs found some traces of malware and cleaned accordingly (prevx found them, just wants me to pay them for the license to clean it...)
I seem to notice it most when playing music and attempting to download data from the internet. That and almost without fail it will BSOD when I leave it overnight running.
Interestingly enough it does not BSOD when I leave it idle on the login screen.

Please help. Its driving me nuts...

O/S details:
Windows Ultimate 64 bit
Vendor Purchased license
Installed about a year ago
upgraded from vista 32-bit (still on box in dual boot mode)

A:BSOD - Clock interrupt not received on secondary processor

Malwarebytes free.

http://www.sevenforums.com/bsod-help-support/131372-bsod-clock-interrupt-not-received-secondary-processor.html
Relevancy 123.69%

error code: 0x000000101 (0x0000000000000019, 0x0000000000000000, 0xFFFFF880033E0180, 0x0000000000000003

I have had a BSOD death once last week and twice this week.

Attached option 1 - DM log collector

A:BSOD Clock interrupt not received on a secondary processor ...

Seems that there isn't any dump files that we need to better analyze your problem.

Follow Dump Files - Configure Windows to Create on BSOD so we can get those files.

-Gamer

http://www.sevenforums.com/bsod-help-support/329611-bsod-clock-interrupt-not-received-secondary-processor.html
Relevancy 123.69%

am getting 2 bsod on computer after installing a printer? was working without flaw up until then. first (and most persistent) is the one on the subject line and the other is "problem has been detected and windows has been shut down to prevent damage"

I've attached photos of both with appropriate minidumps for anyone who would like to give this a shot. I already uninstalled any drivers associated with the printer. I had a video card radeon hd 4670 that I uninstalled and actually got to go 4 hours without a reboot, but it happened anyway. I have bitdefender total home security running, but I have for the better part of a year without any trouble.

Any help is appreciated, thank you.

A:bsod, clock interrupt not received on secondary processor + 1 other

The following drivers may be outdated:
Code:
PS2 fffff880`04366000 fffff880`0436f000 Thu Sep 07 16:49:03 2006 (4500a1df) 0000d72b PS2.sys
AtiPcie fffff880`017f8000 fffff880`01800000 Mon Nov 06 09:59:54 2006 (454f6a0a) 000104a1 AtiPcie.sys
rtlprot fffff880`02c26000 fffff880`02c31000 Fri Apr 20 03:16:48 2007 (46288500) 0000bd49 rtlprot.sys
usbfilter fffff880`042f8000 fffff880`04302000 Wed May 28 16:54:15 2008 (483de297) 000111b5 usbfilter.sys
Rt64win7 fffff880`02c6f000 fffff880`02ca1000 Thu Feb 26 02:04:13 2009 (49a65b0d) 0002eb30 Rt64win7.sys
PS2.sys
AtiPcie.sys
rtlprot.sys
usbfilter.sys
Rt64win7.sys




Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [D:\Kingston\BSODDmpFiles\pmarquez01\022612-20763-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16841.amd64fre.win7_gdr.110622-1503
Machine Name:
Kernel base = 0xfffff800`03054000 PsLoadedModuleList = 0xfffff800`03291e70
Debug session time: Sun Feb 26 00:09:12.889 2012 (UTC - 7:00)
System Uptime: 0 days 3:13:19.406
Loading Kernel Symbols
...............................................................
................................................................
.....................
Loading User Symbols
Loading unloaded module list
.......
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 124, {0, fffffa80080e8028, b6000000, 181}

Probably caused by : hardware

Followup: MachineOwner
---------

2: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa80080e8028, Address of the WHEA_ERROR_RECORD structure.
Arg3: 00000000b6000000, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000000000181, Low order 32-bits of the MCi_STATUS value.

Debugging Details:
------------------


BUGCHECK_STR: 0x124_AuthenticAMD

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

PROCESS_NAME: sqlservr.exe

CURRENT_IRQL: f

STACK_TEXT:
fffff880`02f6ca88 fffff800`0301d903 : 00000000`00000124 00000000`00000000 fffffa80`080e8028 00000000`b6000000 : nt!KeBugCheckEx
fffff880`02f6ca90 fffff800`031da293 : 00000000`00000001 fffffa80`080e9d30 00000000`00000000 fffffa80`080e9d80 : hal!HalBugCheckSystem+0x1e3
fffff880`02f6cad0 fffff800`0301d5c8 : 00000000`00000728 fffffa80`080e9d30 fffff880`02f6ce30 fffffa80`0ea52000 : nt!WheaReportHwError+0x263
fffff880`02f6cb30 fffff800`0301cf1a : fffffa80`080e9d30 fffff880`02f6ce30 fffffa80`080e9d30 00000000`00000000 : hal!HalpMcaReportError+0x4c
fffff880`02f6cc80 fffff800`03010e8f : fffff880`02f64180 00000000`00000001 fffff880`02f6c... Read more

http://www.sevenforums.com/bsod-help-support/216464-bsod-clock-interrupt-not-received-secondary-processor-1-other.html
Relevancy 123.69%

OS - win7 64bit

the computer is a new build, installed with a full retail version. computer is about 3 weeks old.

CPU - intel i5 750
GPU - radeon 5850
gigabyte p55-ud3p (i think)
PSU - seasonic 620W

forgot to mention: i noticed i get the BSODs when i'm running a flash player in full screen. I'm not too sure about not full screen, but for sure I notice it when i'm viewing in full screen

Thanks!

A:BSOD - A clock interrupt was not received on a secondary processor

For whatever reason the BSOD collection app did not pick up any Minidump (.dmp) files, which are the core of our debugging (the rest of the files are just for reference if we notice something out of the ordinary).

Can you please go to C:\Windows\Minidump and .zip up all the files that you find there and upload them with your next post.

Regards,
Reventon

http://www.techsupportforum.com/forums/f299/bsod-a-clock-interrupt-was-not-received-on-a-secondary-processor-490447.html
Relevancy 123.69%

I am getting random BSOD with message "A clock interrupt was not received on a secondary processor within the allocated time interval. I don't even play any games. Normal computer usage. Updated BIOS and graphics to latest releases. All latest Windows updates.
I am stuck with this issue and need help fixing it. I already replaced processor and clean installed windows twice with same results. I have attached crash dump file.
I am not a big expert so please use simple language so I can understand. You help is greatly appreciated.


My computer:
Processor: Intel Core i7-2600 Sandy Bridge 3.4GHz
Motherboard: Asus P8P67-M PRO
Graphics: NVIDIA GeForce GTX 550Ti 1GB
Monitors: 2x Asus 23" VS238H-P using DVI ports
Memory: Corsair XMS3 8GB (2x4GB) x 2 16GB total
Hard Drive: 2x WD SATA 6.0GB running as RAID stripe
Power Supply: 700 Watt
Windows 7 Ultimate 64bit SP1

A:BSOD A clock interrupt was not received on a secondary processor

Post it following the Blue Screen of Death (BSOD) Posting Instructions.

http://www.sevenforums.com/bsod-help-support/291165-bsod-clock-interrupt-not-received-secondary-processor.html
Relevancy 123.69%

My PC either freeze or show BSOD everyday around - minutes after I turn it on the first time of the day weird I know but this is what actually happen almost daily for almost years After researching and gave up a couple of time on several websites I am now accept defeated and hope someone more capable would be able to help me OS - Windows SP fresh installs a few time during the part years the problem remain persist x What was original BSOD processor a secondary clock interrupt received A not was on installed OS on system Windows Is the OS an OEM version came pre-installed on system or full retail version YOU purchased it from retailer Umbrella license from my university download from MSDN Age of system hardware around or years Age of OS installation - have you re-installed the OS last time about a year CPU Intel i with stock fan Video Card Radeon mb can't remember the manufacturer MotherBoard Asus P T SE Power Supply - Tagan Watt System Manufacturer Custome Built Some additional info My temperature is a bit high as it idle at around degree at first I thought that is the problem but my computer usually crash quot only quot the first time I turn on my computer but after a restart I can play a little demanding game like Need For Speed which drive my temp to but I can run just fine Any clue would be greatly appreciate and sorry for my grammar

A:BSOD A clock interrupt was not received on a secondary processor

Unable to load image \SystemRoot\system32\xNtKrnl.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for xNtKrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for xNtKrnl.exe
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64

xNtKrnl.exe is a non-genuine version of the Windows core file NtKrnl.exe, it's used to bypass Windows activation and comes from Odin The Hardware Independent Activator crack tool.

It's hanging the CPU as Windows tries to activate, Solution==get a legal copy of Windows.

http://www.techsupportforum.com/forums/f299/bsod-a-clock-interrupt-was-not-received-on-a-secondary-processor-663818.html
Relevancy 123.69%

BSOD only while transcoding video. It's happened for a while as you can see in the log files. The earlier ones are from creating a video with cyberlink power director and all the ones from 11/27 and 11/28 are using handbreak transcoding DVD rips. I can't recall this computer ever BSOD while doing anything other than video creation.

A:BSOD - a clock interrupt was not received on a secondary processor

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 101, {31, 0, fffff880009ea180, 1}

Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )

Followup: MachineOwner
---------

0: kd> !thread
GetPointerFromAddress: unable to read from fffff80003108000
THREAD fffffa800a584280 Cid 152c.17f0 Teb: 000007fffff90000 Win32Thread: 0000000000000000 RUNNING on processor 0
IRP List:
Unable to read nt!_IRP @ fffffa800a4893f0
Not impersonating
GetUlongFromAddress: unable to read from fffff80003047ba8
Owning Process fffffa800a2a9060 Image: aswFe.exe
Attached Process N/A Image: N/A
fffff78000000000: Unable to get shared data
Wait Start TickCount 27517
Context Switch Count 56503 IdealProcessor: 0
ReadMemory error: Cannot get nt!KeMaximumIncrement value.
UserTime 00:00:00.000
KernelTime 00:00:00.000
Win32 Start Address 0x0000000061551dbc
Stack Init fffff8800d82cdb0 Current fffff8800d82c5e0
Base fffff8800d82d000 Limit fffff8800d827000 Call 0
Priority 7 BasePriority 6 UnusualBoost 0 ForegroundBoost 0 IoPriority 0 PagePriority 1
Many of the .dmp files are inconclusive as to the reason for the BSOD. There is, however, one small clue that may or may not be related to the issue.

aswFe.exe is an Avast executable, and I have read a few complaints about it hogging up to 40% of the CPU. However, in your MSINFO.nfo file it doesn't appear to be installed...in fact I can't find any anti-virus installed in the system (apart from some AVG toolbars).

Has Avast ever been installed on this system?

http://www.sevenforums.com/bsod-help-support/353661-bsod-clock-interrupt-not-received-secondary-processor.html
Relevancy 123.69%

I just had a BSOD with my Clevo W860CU laptop with GTX 285M and 920XM OEM CPU.

The BSOD contained this error message: A clock interrupt was not received on a secondary processor within an allocated time

What could be the cause of it?

A:BSOD A clock interrupt was not received on a secondary processor...

Post the Mini Dump and you will be helped.

http://www.sevenforums.com/crashes-d...tructions.html

http://www.sevenforums.com/bsod-help-support/107734-bsod-clock-interrupt-not-received-secondary-processor.html
Relevancy 123.69%

Hello the received was interrupt [BSOD] clock secondary on not processor A people i just registered in hope for some fixes This problem appared to me weeks ago Where my BSOD's were not often at all However these other days in the week they've been happening every - days But that has also dissapeared Now i BSOD really often when ever [BSOD] A clock interrupt was not received on the secondary processor the computer feels like it This started happening as i said weeks ago when i changed my Motherboard and Processor Because my old one was a AMD Dualcore on a M N-E Asus AM They both died at the same time So i got myself a ASRock N -S UCC But do note that the first four to five days this didnt happen Everything was fine after changing my hardware So Ive read my minidumps with quot whocrashed quot and it indicates it is most likely a driver software problem and NOT hardware Yes indeed this is a wall of text but as a gamer i cannot proceed to enjoy my hobby with a BSOD constantly popping up Ill post my [BSOD] A clock interrupt was not received on the secondary processor specs below and all that CPU AMD Athlon X Dual Core Ghz GPU Video Card Nvidia GT RAM Gigabyte Motherboard ASRock N -S UCC My usual temperatures for the CPU are about C at idle and C - C Ingame Same goes with GPU and just about everything else I am running on the latest drivers for all of my components ive tried rolling back to see if the BSOD's dissapear but nope So im guessing it's not those I compressed the minidump into a rar file and uploaded it There is a file also called quot Additional info quot make sure to read it It contains important information gathered by quot whocrashed quot Thank you in advance guys Your help will be much appriciated P S If you need more info on anything just ask I want this fixed because im unable to do anything with this problem - the original installed OS on the system Answer Windows Vista Ultimate BIT - an OEM or full retail version Answer Full Retail - What is the age of system hardware Answer The system is from itself - What is the age of OS installation have you re-installed the OS Answer Installed a clean install of Windows after changing hardware

A:[BSOD] A clock interrupt was not received on the secondary processor

I forgot to upload a health report and infact do one.

So i just did the health report and, here you go.

http://www.sevenforums.com/bsod-help-support/195052-bsod-clock-interrupt-not-received-secondary-processor.html
Relevancy 123.69%

First of all my desktop specs not the clock was processor secondary A interrupt BSOD received on are AMD Phenom x ghz Quadcore gb Transcend mhz RAM gb KVR mhz RAM MSI ms- mb gb Seagate HDD w PSU I had experienced this for over months now and I just noticed that its getting real bad I first experienced it while working on a project with Microsoft Visual Studio Professional Visual Basic I really had a bad time because I haven't saved it yet but anyway I thought it was only an overheat or something so I just restarted it then continued my work But after opening the application it suddenly froze then the bsod yet appeared again I started to think that maybe the software was faulty so I reinstalled it but no nothing good happened Then I thought maybe my hardwares are at fault so one by one I unplugged them and started to BSOD A clock interrupt was not received on the secondary processor use the application Again nothing good happened Then from that time I stopped working with the project on the desktop and the computer was so smooth fine and no BSOD attacked me Then about weeks later it appeared again like a lightning striking on my whole body And yes I was not using MS Visual Studio anymore when this happened It freezes after a few seconds it shows that the clock interrupt was not received on the secondary processor Any help or suggestions are always welcome Thanks in advance

A:BSOD A clock interrupt was not received on the secondary processor

Please post it following the Blue Screen of Death (BSOD) Posting Instructions.

http://www.sevenforums.com/bsod-help-support/274550-bsod-clock-interrupt-not-received-secondary-processor.html
Relevancy 122.45%

At seemingly random my computer gets a BSOD that states quot A Clock interrupt was not received on a secondary processor within the allocated time interval quot The way it degenerates into the BSOD also seems to be random Sometimes my computer will just instantly freeze then in a few seconds it will go to the blue screen Other times it will stutter slightly only noticeable if I am doing something with sound and the stuttering duration will increase in frequency and magnitude over time until it finally just freezes but keeps playing a loud stuttering sound When it gets to that point it either then switches to the blue screen or stay like that until I force shut off my computer By holding down the off button On other occasions my computer just does a really weird thing where it turns off all open programs then logs off and restarts This is still interpreted by my computer as an incorrect shutdown though The only aftermath I have seen of these errors is that on a few occasions the computer seemed to have reset itself to a previous point in time on within a received Clock was not BSOD A allocated processor interrupt secondary the This meaning that some things BSOD A Clock interrupt was not received on a secondary processor within the allocated that were deleted before have BSOD A Clock interrupt was not received on a secondary processor within the allocated returned and things that have been installed are gone Including saves in video games This has BSOD A Clock interrupt was not received on a secondary processor within the allocated only happened recently though and it never seems to go back that far The time does always seem the same though considering I have the same things in my recycling bin The errors never seem to occur at an allotted time They can happen anywhere from a few hours to a few days apart Though it never seems to happen when I am running a full screen program like a video game or movie I have not installed any unsafe software to my knowledge But I do know for a fact my sister downloads a lot of books nor have I ever opened my computer or tinkered with it in any way I have attempted to remedy the problem with some free programs online but none of them seemed to do anything I have used the freeware version of 'Advanced System Care' and all of it's accessories but nothing seemed to come from that Obviously I am not a tech head in any way but this is what I do know about my computer that might help Windows About months old OS installed about a month or two ago I have no idea what is in my computer because I just bought a standard model from a large retail store I think what I have is the HP Pavilion Elite E F I'm only guessing because of the GB of ram and the TB hard drive I have also done the health check suggested by the stickied thread but the TSF vista support file always fails to upload

http://www.techsupportforum.com/forums/f299/bsod-a-clock-interrupt-was-not-received-on-a-secondary-processor-within-the-allocated-465650.html
Relevancy 122.45%

Hi I have a Toshiba Qosmio X -Q with an i -q GHz Processor GB ram GB NVIDIA GeForce GTX M gpu running win - bit home premium I have had the laptop since I recently cloned my HDD to an SSD put the old HDD in the secondary bay upgraded the RAM from gb to gb and added a PCI USB clock (0X00000101) on BSOD processor interrupt received not secondary expresscard in the order mentioned However since my laptop was overheating of late I tried cleaning the laptop with canned air and at times simply shut down I decided to reduce BSOD clock interrupt not received on secondary processor (0X00000101) the maximum processor state in power management to to prevent the CPU from overclocking After that the laptop ran pretty well for around BSOD clock interrupt not received on secondary processor (0X00000101) a month and now I am getting this BSOD I have the latest BIOS version installed that is available for my machine and I have no idea why I am suddenly getting this BSOD I have attached the dump files from the DM log collector Any help will be deeply appreciated

A:BSOD clock interrupt not received on secondary processor (0X00000101)

There are no dump files in the folder.
Small Memory Dumps are of no use for 0x101 bugchecks, to properly analyse them we need Kernel Memory Dumps.

Follow these instructions on how to change to Kernel Memory Dumps.

Dump Files - Configure Windows to Create on BSOD

Once changed wait for another BSOD, then upload the new dump file to a file sharing website like OneDrive.
The new dump file will be located in C:/Windows/memory.dmp.

Don't zip it up as it corrupts the dump file by compressing it.

http://www.sevenforums.com/bsod-help-support/332843-bsod-clock-interrupt-not-received-secondary-processor-0x00000101.html
Relevancy 122.45%

I recently built the following PC with this stuff

AMD FX-6100
12 GB DDR3 ram
Asus M5A99X Evo
Radeon HD 6870
Windows 7 Ultimate
(Previously used from another build 500 GB HDD)

I get this error - "a clock interrupt was not received from a secondary processor"

My computer keeps getting this blue screen pretty much every 1 or 2 days, and i've been dealing with it cause I built this PC on a budget, and i'm really hoping that I don't have to replace anything. Been doing all sorts of research on what the problem is, but so far I haven't scene anything that fixes this. PLEASE HELP

(if you need the minidump file someone tell me how to attach it on here)

Thank you!

-Desperate College student
Alex

http://www.techsupportforum.com/forums/f299/bsod-a-clock-interrupt-was-not-received-on-a-secondary-processor-amd-fx-6100-a-646883.html
Relevancy 114.39%

From time to time im having blue screen crash
Heres what it says : ImageShack? - Online Photo and Video Hosting
Its new pc so it really bothers me whats wrong.

A:A clock interrupt was not received on the secondary processor

first update your profile specs using this

Secondly bugcheck 101 usually means the processor was deadlocked or unresponsive...

Are you overclocking the processor ??

http://www.sevenforums.com/bsod-help-support/247854-clock-interrupt-not-received-secondary-processor.html
Relevancy 114.39%

I've been getting the BSoD with the error message quot a clock interrupt was not received on secondary processor quot I've tried a lot of things including an update of my BIOS and my video card drivers The error details I get once I restart Windows follows Code Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode BCP BCP EC BCP BCP OS Version Service Pack Product I'm not sure what started this problem but my PC was running smoothly before any of this started to happen The crashes happen most often when I'm trying to start my computer and it can get annoying but clock processor was interrupt on received secondary not it seems once I get it warmed up and it's been running for a while it wont crash but that isn't always true Also I'm not sure of this is related but it started at around the same time the crashes started Some times when I turn on my computer it gets stuck at the boot screen the one where I can hit a key clock interrupt was not received on secondary processor to enter my BIOS settings It appears to occasionally have trouble detecting my DVD drive SATA Some times it will start instantly and the DVD drive will be detected and other times it will stay on the initial boot screen while it tries to detect SATA port my DVD drive at which point it will get stuck or sometimes it will continue booting but probably won't have detected the DVD drive BTW I'm running W Ultimate bit EDIT dmp file attached

A:clock interrupt was not received on secondary processor

  
Quote: Originally Posted by PSYCHONAUT


I've been getting the BSoD with the error message: "a clock interrupt was not received on secondary processor". I've tried a lot of things, including an update of my BIOS and my video card drivers. The error details I get once I restart Windows 7 follows:

Code:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 3081

Additional information about the problem:
BCCode: 124
BCP1: 00000000
BCP2: 867894EC
BCP3: 00000000
BCP4: 00000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1
I'm not sure what started this problem, but my PC was running smoothly before any of this started to happen. The crashes happen most often when I'm trying to start my computer, and it can get annoying...but it seems once I get it warmed up and it's been running for a while, it wont crash, but that isn't always true.

Also, I'm not sure of this is related, but it started at around the same time the crashes started. Some times when I turn on my computer, it gets stuck at the boot screen, the one where I can hit a key to enter my BIOS settings. It appears to occasionally have trouble detecting my DVD drive (SATA). Some times it will start instantly and the DVD drive will be detected, and other times, it will stay on the initial boot screen while it tries to detect SATA port 2 (my DVD drive), at which point it will get stuck, or sometimes it will continue booting but probably won't have detected the DVD drive.

BTW, I'm running W7 Ultimate 32bit


We reall could use the actual DMP file can y ou upload it to us to debug? Meanwhile the bugcheck 124 is hardware related. often ram, HD, dvd, etc.

Have you gone through these procedures yet? http://www.sevenforums.com/crash-loc...-what-try.html

let us know if you need help
Ken

http://www.sevenforums.com/bsod-help-support/67828-clock-interrupt-not-received-secondary-processor.html
Relevancy 114.39%

Hi all My PC either freeze or show BSOD everyday around - minutes after I turn it on the first time of the day weird I know but this is what actually happen almost daily for almost years After researching and gave up not a clock received on processor was interrupt A secondary a couple of time on several websites which indicate that there all many possible causes to this error I am now accept defeated and hope someone more capable would be able to help me My PC Tech Support Guy System Info Utility version OS Version Microsoft Windows Professional Service Pack bit Processor Intel R Core TM i CPU GHz Intel Family Model Stepping Processor Count A clock interrupt was not received on a secondary processor RAM Mb Graphics Card ATI Radeon HD Mb Hard Drives C Total - MB Free - MB D Total - MB Free - MB Motherboard ASUSTeK Computer INC P T SE Antivirus Microsoft Security Essentials Updated and Enabled PSU Tagan Watt Stock fan and never overclock Some additional info My temperature is a bit high as it idle at around degree at first I thought that is the problem but my computer usually crash quot only quot the first time I turn on my computer but after a restart I can play a little demanding game like Need For Speed which drive my temp to but I can run just fine Any clue would be greatly appreciate and sorry for my grammar nbsp

https://forums.techguy.org/threads/a-clock-interrupt-was-not-received-on-a-secondary-processor.1067349/
Relevancy 114.39%

Recently i just started getting quot a clock interrupt was not received on a secondary processor within the allocated time interval quot a couple weeks before this error I received interrupt processor clock not secondary was getting Not less or equal to bsod because of over heating I put in a corair h and the over heating problem was solved but i think some of the hardware might clock interrupt not received secondary processor have been damaged hence this bsod The only time it ever bsod is when im in a high end game graphics rendering etc Simple games that dont require much of my computer rarely ever bsod some system specs motherboard - m n -e nvidia gt athlon x dual core underclocked to x atm to hopefully help some gigs of memory x home premium I believe this computer has only been vista It came pre-installed hardware age Replaced - years ago powersupply Replaced about year ago nvidia gt graphic cards motherboard Replaced in last few weeks gigs of memory replaced gig and gigs but might add some back into cpu as mine can handle it Other than what was replaced ive had this computer for a good few years with issues here and there I'm gonna upload the file you guys wanted in the how to post thing but i must say i dont see hardly any minidumps and i believe this to be just a hardware issue Any help links on how to check hardware drivers would be very much appreciated EDIT I found on the forums a FurMark and installed ran it At first even with sli enabled in nvidia control panel it would not use my nd gpu Starting temps were f and f it would the f gpu then go back to and then the f I looked at their troubleshooting and found if i rename it to the quake exe file it would run sli I did this and it worked making both run at it also made my f gpu hit f within a few minutes Its looking like one of my video cards is over heating and the only time i use both is for gaming with sli

A:clock interrupt not received secondary processor

Hi welcome to the forum.
In view of your BSOD's, I will pass this to one of our members who specialises in BSOD's for his attention.
I ask you please to be patient and wait a while until he becomes available.
Thank you.

http://www.vistax64.com/crashes-debugging/288727-clock-interrupt-not-received-secondary-processor.html
Relevancy 114.39%

New to building computers Managed to get it together and works really well right up until it doesn't I am an architect and built a computer for modeling and rendering The processor received a was by interrupt clock secondary A not modeling program I use is a A clock interrupt was not received by a secondary processor bit program so I wanted to overclock as clock speed makes a huge difference in the modeling program usability The computer works great but Its been shutting down on me every few days Typically when rendering Maxwell render and it is using all the cores I currently have it overclocked only with the tpu switch ghz The components are asus p x intel i corsair dominator gb corsair w corsair h i radiator nvidia quadro samsung pro gb Temperatures are very stable c was the highest I saw in the hr stress test I have the latest asus bios installed Windows bit I installed aida and get no error messages after running it for hrs The one strange thing I noticed was in the power tab it mostly a straightish line graph but every once and a while drops off precipitously The Power minimums all read - Again I really don't know what I am doing so hoping to get some ideas of where to start Googling around there does not seem to be any solutions to this crash that I can find

A:A clock interrupt was not received by a secondary processor

Here is the aida 64 test and my administrative event log

http://www.sevenforums.com/general-discussion/289530-clock-interrupt-not-received-secondary-processor.html
Relevancy 114.39%

Last month I started getting this BSOD and I'm not sure the reason I'd love help on what to do to see if anything I did caused this I know prior to it happening AVG was accidentally set to delete a bunch of things and may have deleted some important files but I'm not sure if it was just coincidental timing Back in June I replaced my HD because the one I had for a long time died I had Vista prior to that and have on the new one but have had no problems with it up until these BSODs The computer will freeze up on everything and eventually BSOD most of A the received was interrupt not processor on secondary clock the time A clock interrupt was not received on the secondary processor Sometimes it doesn't restart after the BSOD and I have to hard reset it Sometimes it doesn't even BSOD and just freeze up and black screen Sometimes I can tell when it is about to happen because it starts to hang up and if any video or music is on I can hear it start to sound a little bit choppy It seems that opening files downloading things windows opening seem to A clock interrupt was not received on the secondary processor be a little slow overall too now Like I said any help as to what the issue might be would be appreciated before jumping straight to the motherboard frying conclusion which one forum did that didn't even help me out and eventually just deleted my post when I kept saying that I still had the problem as obviously dropping money on a new desktop is the very last thing I'd like to do if I don't absolutely have to I've also attached a rar with what I hope are all of the right files but please let me know what else I can do or provide to help Thanks a lot

A:A clock interrupt was not received on the secondary processor

I hope posting again isn't against the rules, but something big and sudden just happened. Loading the Documents/Control Panel/Computer screens, the sidebar where your computer/drives load up wouldn't load at all. So I decided to restart the computer. When I did so, the HP blue startup screen appeared, but the computer didn't go past that. And despite the F## prompts to access the BIOS and Diagnostics, etc being in screen, hitting those buttons did nothing. Panicked, I looked on my phone for potential help, and after unplugging everything from the computer itself (computer, mouse, all USBs) and trying to start it again, the computer thankfully booted up. As a test, I plugged everything back in and restarted again and it seemed to restart without a problem. But this was very worrisome when it happened, if this incident helps in anyone who replies to this.

http://www.sevenforums.com/bsod-help-support/315294-clock-interrupt-not-received-secondary-processor.html
Relevancy 112.22%

HP m9600t Win7 clock interrupt not received on secondary processor crash.

Pc will crash and display BSOD with the following error:
"A clock interrupt was not received in a secondary processor within the allocated time interval"
My PC will fine for an hour or so and then crash. I tried the Win 7 system repair without success. It just stuck in a loop.

Where do I begin to troubleshoot this issue? I've uploaded the SF Diagnostic Tool results.

I've not installed any new hardware recently. The last software update was Quicktime/itunes. Unfortunately, my system restore only shows restore points well in the past.

Many thanks in advance for any help,
Will

A:HP m9600t Win7 clock interrupt not received on secondary processor

These threads should help you start.Stop 0x124 - what it means and what to try
STOP 0x101: CLOCK_WATCHDOG_TIMEOUT troubleshtg





Quote:
A "stop 0x124" is fundamentally different to many other types of bluescreens because it stems from a hardware complaint.

Stop 0x124 minidumps contain very little practical information, and it is therefore necessary to approach the problem as a case of hardware in an unknown state of distress.

You can read more on this error and what to try here... Stop 0x124 - what it means and what to try Stop 0x124 - what it means and what to try



Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 124, {0, fffffa80097c08f8, 0, 0}

Probably caused by : GenuineIntel

Followup: MachineOwner
---------

5: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa80097c08f8, Address of the WHEA_ERROR_RECORD structure.
Arg3: 0000000000000000, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000000000000, Low order 32-bits of the MCi_STATUS value.

Debugging Details:
------------------


BUGCHECK_STR: 0x124_GenuineIntel

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

PROCESS_NAME: System

CURRENT_IRQL: 0

STACK_TEXT:
fffff880`0357e6f0 fffff800`0351fcb9 : fffffa80`097c08d0 fffffa80`06a2fb60 fffff8a0`0000000e 00000000`00000000 : nt!WheapCreateLiveTriageDump+0x6c
fffff880`0357ec10 fffff800`03400687 : fffffa80`097c08d0 fffff800`0347a2b8 fffffa80`06a2fb60 00000000`00000000 : nt!WheapCreateTriageDumpFromPreviousSession+0x49
fffff880`0357ec40 fffff800`03367a35 : fffff800`034dbac0 00000000`00000001 fffffa80`087f7de0 fffffa80`06a2fb60 : nt!WheapProcessWorkQueueItem+0x57
fffff880`0357ec80 fffff800`032e4471 : fffff880`01288e00 fffff800`03367a10 fffffa80`06a2fb00 00000000`0000055a : nt!WheapWorkQueueWorkerRoutine+0x25
fffff880`0357ecb0 fffff800`03574f7a : 00000000`00000000 fffffa80`06a2fb60 00000000`00000080 fffffa80`06a16040 : nt!ExpWorkerThread+0x111
fffff880`0357ed40 fffff800`032cb9c6 : fffff880`03371180 fffffa80`06a2fb60 fffff880`0337c0c0 00000000`00000000 : nt!PspSystemThreadStartup+0x5a
fffff880`0357ed80 00000000`00000000 : fffff880`0357f000 fffff880`03579000 fffff880`030b8540 00000000`00000000 : nt!KiStartSystemThread+0x16


STACK_COMMAND: kb

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: GenuineIntel

IMAGE_NAME: GenuineIntel

DEBUG_FLR_IMAGE_TIMESTAMP: 0

FAILURE_BUCKET_ID: X64_0x124_GenuineIntel_PROCESSOR_MAE_PRV

BUCKET_ID: X64_0x124_GenuineIntel_PROCESSOR_MAE_PRV

Followup: MachineOwner
---------

5: kd> !errrec fffffa80097c08f8
===============================================================================
Common Platform Error Record @ fffffa80097c08f8
-------------------------------------------------------------------------------
Record Id : 01cdd1c604228f64
Severity : Fata... Read more

http://www.sevenforums.com/bsod-help-support/267783-hp-m9600t-win7-clock-interrupt-not-received-secondary-processor.html
Relevancy 112.22%

Hello guys i have been looking through these forums for a long time but recently interrupt not on time allocated A processor within secondary was received the a clock this bsod has crossed the line i am soo upset and i want to find out what is wrong So Here i go Amd Athlon Dual Core Biostar TPower n Corsair mb mhz GeForce GT amp Edition gb Maxtor Diamondmax sata hdd ' yuraku widescreen monitor Ariel Case looks like a beehive with air holes everywhere fi ttied with a mm fan on the back and another or mm on A clock interrupt was not received on a secondary processor within the allocated time the side EZ supercool w source LG dvdwriter basic keyboard basic optic mouse logitech basic logitech speakers Dynamode n wireless pci card I had installed on this pc WIndows Vista and after year of error i coudnt repair it anymore I hae errors on Xp before i bought a Vista and now i installed Windows as a test Unfortunately i have received the error again after minutes of playing Dark Orbit the browser game I noticed it usually occures when i am playing games internet explorer or sometimes games winamp I downloaded Windows Dbg and i started to analise the errors the results were various due to some programs i had installed After reading some opinions here i changed my antivirus to AVG and my spyware and malaware defender to Ad-Aware I must specify that when i was using Windows Vista i did all the driver upgrades and a bios upgrade and installed the dual core optimizer for my cpu and no luck After these changes and installing windows the error is like this I will present the last and i have analysed Code Error Loading Dump File C Windows Minidump - - dmp Mini Kernel Dump File Only registers and stack trace are available Symbol search path is SRV c symbols http msdl microsoft com download symbols Executable search path is Windows Kernel Version MP procs Free x Product WinNt suite TerminalServer SingleUserTS Built by amd fre win rtm - Machine Name Kernel base xfffff a c PsLoadedModuleList xfffff c e Debug session time Sat Dec UTC System Uptime days Loading Kernel Symbols Loading User Symbols Loading unloaded module list Bugcheck Analysis Use analyze -v to get detailed debugging information BugCheck fffff ea Probably caused by Unknown Image ANALYSIS INCONCLUSIVE Followup MachineOwner --------- kd gt analyze -v Bugcheck Analysis CLOCK WATCHDOG TIMEOUT An expected clock interrupt was not received on a secondary processor in an MP system within the allocated interval This indicates that the specified processor is hung and not processing interrupts Arguments Arg Clock interrupt time out interval in nominal clock ticks Arg Arg fffff ea The PRCB address of the hung processor Arg Debugging Details ------------------ BUGCHECK STR CLOCK WATCHDOG TIMEOUT PROC CUSTOMER CRASH COUNT DEFAULT BUCKET ID VISTA DRIVER FAULT PROCESS NAME System CURRENT IRQL d STACK TEXT fffff fed fffff a a fffff ea nt KeBugCheckEx fffff fed fffff ad f fffffa fffff fffff de nt FNODOBFM string' x e e fffff fed d fffff a d fffff a fffff fedb fffff a nt KeUpdateSystemTime x fffff fedad fffff aca f fffff fedb fffffa e f hal HalpHpetClockInterrupt x d fffff fedb fffff d f fffff adba a fffffa dfc nt KiInterruptDispatchNoLock x fffff fedc fffff adba a fffffa dfc ffffd e e amdk C Halt x fffff fedca fffff ad cc fffff c e fffff fffff e f nt PoIdle x a fffff fedd nt KiIdleLoop x c STACK COMMAND kb SYMBOL NAME ANALYSIS INCONCLUSIVE FOLLOWUP NAME MachineOwner MODULE NAME Unknown Module IMAGE NAME Unknown Image DEBUG FLR IMAGE TIMESTAMP FAILURE BUCKET ID X CLOCK WATCHDOG TIMEOUT PROC ANALYSIS INCONCLUSIVE BUCKET ID X CLOCK WATCHDOG TIMEOUT PROC ANALYSIS INCONCLUSIVE Followup MachineOwner --------- kd gt lmvm Unknown Module start end module name Error Loading Dump File C Windows Minidump - - dmp Mini Kernel Dump File Only registers and stack trace are available Symbol search path is SRV c symbols http msdl microsoft com download symbols Executable search path is Windows Kernel Version MP procs Fr... Read more

A:A clock interrupt was not received on a secondary processor within the allocated time

Hi -

Bugcheck 0x101 = CPU hang

Info on 0x101 - http://www.sevenforums.com/crashes-d...tml#post356791

Run one of the dumps again in Windbg; paste the following command into the kd> command line -

Code:

!analyze -v;r;kv;lmtn;lmtsmn
Paste output into next post.

See if Driver Verifier can help; however 0x101 is usually unknown hardware failure.

Driver Verifier - http://jcgriff2.com/driver_verifier.htm

Regards. . .

jcgriff2

`

http://www.techsupportforum.com/forums/f299/a-clock-interrupt-was-not-received-on-a-secondary-processor-within-the-allocated-time-533627.html
Relevancy 111.29%

Hey guys About a month ago I began receiving this bsod quot A clock interrupt was not received on a secondary processor quot Bugcheck code x x x xFFFFF x "Clock Random BSOD received secondary processor" a interrupt not on My System Specs Laptop Clevo p hm Mobo Clevo p hm CPU Intel Core i - QM Random BSOD "Clock interrupt not received on a secondary processor" Processor M Cache GHz RAM GB DDR mhz GPU nVidia geforce gtx m As per the BSOD Instruction thread - Windows x - Original installed OS - Its OEM - The system was purchased brand new in August - The OS was also installed in August by the manufacturer Anyway I have been having frequent bsod's for about a month with the same error listed above For absolutely no reason It would occur while I was watching a youtube video or typing on Word with the cpu under load At first I assumed that it was my i going south so I stress tested my cpu using Intel Burn Test at the maximum settings for runs did so twice and got no errors Then I ran OCCT Linpack for an entire hour at the maximum settings Since that caused absolutely no instability I turned to ram I removed a stick and tested the other using Memtest x then switched Which is why in my dump files I have only gb of ram listed However passes on each stick revealed no errors So now I have turned to drivers and upon running quot verifier exe quot I got a bsod on startup because driver verifier found a faulty driver and crashed the system I come as yes a new user because frankly I have no where else to turn A friend reccomended you guys because you offer great crash analysis and I leaped at the oppurtunity I am frustrated and tired of my system hanging roughly once for every hour of run time I will cruise around on the forums and try to help here and try to be active If you guys would help me I would be forever grateful Thank you So much

A:Random BSOD "Clock interrupt not received on a secondary processor"

Your crash may have been caused by stop-0x101-clock_watchdog_timeout
Please read the link below carefully...

STOP 0x101: CLOCK_WATCHDOG_TIMEOUT troubleshtg

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

If you are overclocking STOP

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.


To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

http://www.sevenforums.com/bsod-help-support/214293-random-bsod-clock-interrupt-not-received-secondary-processor.html
Relevancy 111.29%

I get random crashes when I play DDO online. The screen freezes and I have to do a manual restart. I get a Kernal error, Event ID 41.
Del lStudio XPS Desktop 435MT
? OS -Windows 7
? x64 ?
? What was original installed OS on system? Vista 64
? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)? Free copy of Win 7 for taking Microsoft cert classes
? Age of system (hardware) 8/08/09
? Age of OS installation - have you re-installed the OS? Installed December 09
? CPU- I7-950, 3.06, 8MB, BLM, D0
? Video Card Radeon HD 4850
? MotherBoard
? Power Supply - 360W Liteon (?)

Thanks for the help.

A:BSOD. "A clock interrupt was not received on a secondary processor"

Hi -

Please re-run the BSOD file collection app - the zip attachment is only 22 bytes - empty.

http://www.techsupportforum.com/f217...ns-452654.html

For info, the thread title "clock interrupt...." = bugcheck 0x101 = CLOCK_WATCHDOG_TIMEOUT = CPU hang.

Regards. . .

jcgriff2

.

http://www.techsupportforum.com/forums/f299/bsod-a-clock-interrupt-was-not-received-on-a-secondary-processor-500010.html
Relevancy 111.29%

Hello recently for about a month or so Ive been having random crashes quite often Once or twice a day The error message has always been the one in the title and ive kinda delayed getting around to fixing it I've researched it and a few people said that AVG could be to blame but its still occurring "a secondary clock received not was a interrupt processor" BSOD on after an uninstall I have made quite a few changes to the system but im not quite sure which ones caused this and it would take an eternity to go through them Id much rather do a clean install My specs are as follows Windows SP Ultimate -bit AMD Phenom II X GHZ Overclocked its ghz standard X GB OCZ Platinum BSOD "a clock interrupt was not received on a secondary processor" mhz Satellite SL- EPS W PSU Nvidia Geforce GTX Black Edition by XFX X gb WD Blue in RAID Gigabyte MA -UD Im pretty sure the overclocking is not to blame I overclocked it long ago and it survived hours of prime with no errors I even ran it at standard clock for BSOD "a clock interrupt was not received on a secondary processor" a few days and the BSODs still continued I downloaded a program to look at my crash dumps and it gave me the following info Code On Thu PM GMT your computer crashed crash dump file C Windows Minidump - - dmp This was probably caused by the following module ntoskrnl exe nt x CC Bugcheck code x x x xFFFFF E x Error CLOCK WATCHDOG TIMEOUT file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System Bug check description This indicates that an expected clock interrupt on a secondary processor in a multi-processor system was not received within the allocated interval This appears to be a typical software driver bug and is not likely to be caused by a hardware problem This problem might be caused by a thermal issue The crash took place in the Windows kernel Possibly this problem is caused by another driver which cannot be identified at this time On Thu PM GMT your computer crashed crash dump file C Windows memory dmp This was probably caused by the following module hal dll hal HalReturnToFirmware xB D Bugcheck code x x x xFFFFF E x Error CLOCK WATCHDOG TIMEOUT file path C Windows system hal dll product Microsoft Windows Operating System company Microsoft Corporation description Hardware Abstraction Layer DLL Bug check description This indicates that an expected clock interrupt on a secondary processor in a multi-processor system was not received within the allocated interval This appears to be a typical software driver bug and is not likely to be caused by a hardware problem This problem might be caused by a thermal issue The crash took place in a standard Microsoft module Your system configuration may be incorrect Possibly this problem is caused by another driver on your system which cannot be identified at this time On Wed PM GMT your computer crashed crash dump file C Windows Minidump - - dmp This was probably caused by the following module ntoskrnl exe nt x CC Bugcheck code x x x xFFFFF E x Error CLOCK WATCHDOG TIMEOUT file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System Bug check description This indicates that an expected clock interrupt on a secondary processor in a multi-processor system was not received within the allocated interval This appears to be a typical software driver bug and is not likely to be caused by a hardware problem This problem might be caused by a thermal issue The crash took place in the Windows kernel Possibly this problem is caused by another driver which cannot be identified at this time On Tue AM GMT your computer crashed crash dump file C Windows Minidump - - dmp This was probably caused by the following module ntoskrnl exe nt x CC Bugcheck code x x x xFFFFF E x Error CLOCK WATCHDOG TIMEOUT file path C Windows system ntoskrnl exe product Microsof... Read more

A:BSOD "a clock interrupt was not received on a secondary processor"

Vista - Press Win+Pause, click advanced system settings, under the startup and recovery box, click settings, under the write debugger information box, change the selection from small memory dump to kernel memory dump.

When you BSOD again
get the latest dump file and post here

http://www.techsupportforum.com/forums/f299/bsod-a-clock-interrupt-was-not-received-on-a-secondary-processor-619808.html
Relevancy 111.29%

Hello everyone I have been dealing with this BSOD for a few months now I have updated BIOS updated my motherboard chip sets updated my video drivers and have scoured forum after forum trying to find an answer a Clock secondary received was not BSOD processor" "A interrupt on to my problem This BSOD occurs most often when I am running games but they are not games that should push my computer so hard Some games are early access on steam but others are games like the Sims the Sims or Star Wars Empire at War Which BSOD "A Clock interrupt was not received on a secondary processor" are disc games that run fine on any other computer The game crashing does not always trigger the BSOD it sometimes only crashes the game but most often it brings up the BSOD If you have any suggestions please let me know if you need anything else in order to figure out what is going on than I will get it BSOD "A Clock interrupt was not received on a secondary processor" for you as soon as possible Computer specs Windows bit windows was the original OS full retail version of OS years old Hardware OS installed months ago I have reinstalled the OS Intel i - k processor port size Nvidea Geforce graphics card ASUS p Z - VLX Motherboard GB of ram Watt Kingwin power supply Completely custom built from NewEgg parts Desktop

http://www.techsupportforum.com/forums/f299/bsod-a-clock-interrupt-was-not-received-on-a-secondary-processor-1109274.html
Relevancy 111.29%

Hi Guys,

Keep receiving the BSOD and the error message states "Clock interrupt was not received on a secondary processor" seems to happen at random times regardless of what I'm doing on the computer.

I thought it was the CPU initially so I ran intelburn test three times (standard through to very high) everything went smoothly with CPU reaching temps of 55 degrees.
Also ran Sf/scannow in elevated command prompt - no issues there.
I don't have anything OC'd.
Ran malwarebytes no objects detected
I've read it could be a motherboard issue but no idea how to test it...
Sf attached.Any advice welcome.

Thanks!

A:BSOD "Clock interrupt was not received on a secondary processor"

To properly analyse 0x101 bugchecks we need Kernel Memory Dumps instead of minidumps, we'll come to that later on if we can't find anything.

Lets give Prime95 a shot, run it for around 2 hours.
Hardware - Stress Test With Prime95



   Note

Like all stress tests it quickly raises your temperature so I recommend using a temperature monitoring software, I use HWmonitor.
You can download it here.

HWMonitor CPUID - System & hardware benchmark, monitoring, reporting

http://www.sevenforums.com/bsod-help-support/329849-bsod-clock-interrupt-not-received-secondary-processor.html
Relevancy 111.29%

Hello everyone I have been dealing with this BSOD for a few months now I have updated BIOS updated my motherboard chip sets updated my video drivers and have scoured forum after forum trying to find an answer to my problem This BSOD occurs most often when I am running games but they are was "A BSOD interrupt not on processor" a received Clock secondary not games that should push my computer so BSOD "A Clock interrupt was not received on a secondary processor" hard Some games are early access on steam but others are games like the Sims the Sims or Star Wars Empire at War Which are disc games that run fine on any other computer The game crashing does not always trigger the BSOD it sometimes only crashes the BSOD "A Clock interrupt was not received on a secondary processor" game but most often it brings up the BSOD If you have any suggestions please let me know if you need anything else in order to figure out what is going on than I will get it for you as soon as possible Computer specs Windows bit intel i processor port size ASUS p Z - VLX Motherboard Nvidea Geforce graphics card GB of ram Watt power supply Thank you

http://www.techsupportforum.com/forums/f299/bsod-a-clock-interrupt-was-not-received-on-a-secondary-processor-1109266.html
Relevancy 106.33%

Hi guys,

First of all, thanks for reading this.

I switched my computer on 3 days a go and encountered the above BSOD. It happens as soon as I sign in or when I open a web browser. Previously I had no known issues with the computer and made no changes to cause this problem, no added hardware or software. I followed the instructions on this site and used the application for getting system information. I have attached the files to this post if anyone has any time to look through them that would be much appreciated.

Many thanks

(just to add, I am posting this from the computer in question, using safe mode)

A:BSOD - A clock interrupt was not received on a secondary.....

  
Quote: Originally Posted by henryg40


Hi guys,

First of all, thanks for reading this.

I switched my computer on 3 days a go and encountered the above BSOD. It happens as soon as I sign in or when I open a web browser. Previously I had no known issues with the computer and made no changes to cause this problem, no added hardware or software. I followed the instructions on this site and used the application for getting system information. I have attached the files to this post if anyone has any time to look through them that would be much appreciated.

Many thanks

(just to add, I am posting this from the computer in question, using safe mode)


Hello there!

Follow this article STOP 0x101: CLOCK_WATCHDOG_TIMEOUT troubleshtg and do the tests.

BSOD BUGCHECK SUMMARY


Code:

Loading Dump File [C:\Documents and Settings\Shyam\_jcgriff2_\dbug\__Kernel__\080612-11419-01.dmp]
Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
Debug session time: Tue Aug 7 00:04:55.642 2012 (GMT+6)
System Uptime: 0 days 0:01:37.875
BugCheck 101, {31, 0, fffff88003565180, 2}
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )
BUGCHECK_STR: CLOCK_WATCHDOG_TIMEOUT_4_PROC
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_CLOCK_WATCHDOG_TIMEOUT_4_PROC_ANALYSIS_INCONCLUSIVE
Bugcheck code 00000101
Arguments 00000000`00000031 00000000`00000000 fffff880`03565180 00000000`00000002
??????????????????????????????????????????????????????????????????????????????????????``
Loading Dump File [C:\Documents and Settings\Shyam\_jcgriff2_\dbug\__Kernel__\080512-9828-01.dmp]
Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
Debug session time: Sun Aug 5 19:20:40.509 2012 (GMT+6)
System Uptime: 0 days 0:00:37.352
BugCheck 101, {31, 0, fffff88003565180, 2}
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )
BUGCHECK_STR: CLOCK_WATCHDOG_TIMEOUT_4_PROC
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_CLOCK_WATCHDOG_TIMEOUT_4_PROC_ANALYSIS_INCONCLUSIVE
Bugcheck code 00000101
Arguments 00000000`00000031 00000000`00000000 fffff880`03565180 00000000`00000002
??????????????????????????????????????????????????????????????????????????????????????``
Loading Dump File [C:\Documents and Settings\Shyam\_jcgriff2_\dbug\__Kernel__\080512-9547-01.dmp]
Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
Debug session time: Sat Aug 4 14:32:55.912 2012 (GMT+5)
System Uptime: 0 days 0:10:42.755
BugCheck 101, {31, 0, fffff88003565180, 2}
Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )
BUGCHECK_STR: CLOCK_WATCHDOG_TIMEOUT_4_PROC
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: MsMpEng.exe
FAILURE_BUCKET_ID: X64_CLOCK_WATCHDOG_TIMEOUT_4_PROC_ANALYSIS_INCONCLUSIVE
Bugcheck code 00000101
Arguments 00000000`00000031 00000000`00000000 fffff880`03565180 00000000`00000002
??????????????????????????????????????????????????????????????????????????????????????``
Loading Dump File [C:\Documents and Settings\Shyam\_jcgriff2_\dbug\__Kernel__\080512-10155-01.dmp]
Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
Debug session time: Sun Aug 5 19:21:48.261 2012 (GMT+6)
System Uptime: 0 days 0:00:24.494
BugCheck 101, {31, 0, fffff88003565180, 2}
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )
BUGCHECK_STR: CLOCK_WATCHDOG_TIMEOUT_4_PROC
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_CLOCK_WATCHDOG_TIMEOUT_4_PROC_ANALYSIS_INCONCLUSIVE
Bugcheck code 00000101
Arguments 00000000`00000031 0000000... Read more

http://www.sevenforums.com/bsod-help-support/245021-bsod-clock-interrupt-not-received-secondary.html
Relevancy 105.09%

Today when i was just browsing internet i came across with this blue screen.

A clock interrupt was not received on a secondary processor within the allocated time interval.

Can anyone please help me out why this problem appeared ? When i wasn't even gaming or doing any sort of heavy processing ?

- Alienware M17X R2 , Intel Core i7 740QM , 4 GB RAM , ATI Mobility 5870 Crossfire
- Windows 7 Home Premium x64
- OEM Came Pre-installed on system
- Age of system (hardware) 7-8 Months
- Age of OS installation 7-8 Months , Never Installed

A:BSOD A clock interrupt was not received on a secondary processo

Run Prime 95 to test your CPU. Carefully the instructions in this tutorial: CPU - Stress Test with Prime95. Run 3 separate tests, one on each of the settings (Blend, Small FFTs, Large FFTs). Post back with your results

According to your dump file the issue is with your Processor. This occurs when the processor is non-responsive or is deadlocked.

Possible Solutions :

a) BIOS bug
b) a driver whose activity is causing the target processor to lock up
c) a hardware defect (temperature, voltage, dust

But its mainly caused by a defective CPU or outdated BIOS

Details about this bugcheck:
http://www.sevenforums.com/crash-loc...tml#post567135

Win 7 A Clock Interrupt... BSOD (101 Error)

http://www.sevenforums.com/bsod-help-support/177328-bsod-clock-interrupt-not-received-secondary-processo.html
Relevancy 101.99%

"A clock interrupt was not received on a secondary processor within the allocated time interval"

I sporadically receive this BSOD when playing CPU/Graphic intensive games like IV etc. and I have attempted multiple times to get a crash dump file to analyze it but apparently the minidump folder is not under the Windows directory and there is no .*dmp file. Computer works fine other then that BSOD, when that BSOD happens, before it whatever i'm playing hangs and the sound skips and I get that BSOD. Event viewer also shows no entries.

Help would be greatly appreciated .
 

A:"A clock interrupt was not received on a secondary processor within the allocated.."

https://forums.techguy.org/threads/a-clock-interrupt-was-not-received-on-a-secondary-processor-within-the-allocated.970265/
Relevancy 101.68%

I've had my computer since July got it custom built and heavily stress tested at Tiger Direct before bringing it home Here are the specifications Win x legitimate MS store download Home Premium upgraded from disc install Vista x in November I think Asus P T standard motherboard OCZ MHz DDR Gold-series tri-channel RAM running at default BIOS speed XFX Radeon GB Seagate TB MB cache HDD Ultra LSP clock a was processor" secondary by "A interrupt received not Watt SLI PSU i D at stock speed No overclocking Now when I first brought home my PC I had a few freezing errors it froze twice in two weeks Couldn't move the mouse had to hard reboot Brought it back into Tiger and they couldn't identify a problem said it was probably a fluke Now that was in July In "A clock interrupt was not received by a secondary processor" December I had the same thing occur and I assumed it "A clock interrupt was not received by a secondary processor" was a fluke as well No Event Logs about what caused the error or anything Recently on April quite a while "A clock interrupt was not received by a secondary processor" later till today Apr Apr May I've had BSODs all giving me the same error in the event log Latest bsod today Code The computer has rebooted from a bugcheck The bugcheck was x x x xfffff fd x A dump was saved in C Windows MEMORY DMP Report Id - - A fatal hardware error has occurred Reported by component Processor Core Error Source Machine Check Exception Error Type Internal Timer Error Processor ID And it said at the time of the BSOD itself quot A clock interrupt was not received by a secondary processor within the allocated time interval quot but I never had the chance to read what it said the first two times It's always internal timer error ID not sure if that matters All times this has happened completely randomly while doing pretty much nothing intensive I've ran Prime all tests for - hours EACH without problems memtest I haven't run in a while but I did back in December after that freeze for hours with no errors I don't really remember having problems playing Crysis or Crysis Warhead with my video card either Anyhow after the SECOND BSOD I reset my BIOS the settings were not really altered anyway updated it to the latest as well as updated my video card drivers chipset drivers mouse kb drivers and sound drivers to the latest I do so pretty regularly for video sound I never did for chipset or BIOS but I read online to try that It literally crashed again with the same error a few days later Unfortunately the first two BSODs quot froze quot during the minidump so they were never made The third one luckily didn't so I DO have one minidump I don't know where it is or how to attach it though Please if anyone can offer me some help I'd appreciate it I can provide more information and the dumps if you tell me where they are I'm not particularly good with opening up the PC and checking things I had tiger direct do it twice so I don't see why there would be an issue like that Right now I'm thinking something is bad RAM CPU video card mobo The problem is I have NO IDEA how to identify what it could be I doubt it's a heat issue large fft testing was fine after hours and the system never gets as hot as that under normal use Here's what I remember doing during the recent BSODs the older freezing problems were too long ago for me to remember pretty sure they happened just while browsing or on the desktop but I think it's all related ran prime for a while in blend mode after i stopped I went to do something else and the sound sort of quot stuttered quot and then BSOD Second time I was uploading to mediafire and all of a sudden BSOD The CPU ram usage was nothing out of the ordinary Third and most recent time I was watching a p youtube video GPU accel is on I noticed a bit of sound stutter and after a few more minutes of watching the video my PC froze -- I waited seconds was about to reboot but the freeze turned into a ... Read more

A:"A clock interrupt was not received by a secondary processor"

Sorry, it's not letting me edit the message anymore but here's some more info:
1. regarding the most recent bluescreen, it seems to have reset some of my ATI catalyst settings. But the thing is, I always watch videos with GPU accel without problems. The ATI drivers stay updated as well, I'm good about that. Running the latest drivers right now and the first two BSODs happened while on the previous set. It still could be video card I guess, maybe it's something else like RAM or mobo or CPU, I have no idea. The computer seems to freeze/BSOD at random points in time which seems unrelated to each other, however it's important to note that it has never frozen/BSOD when not being used. It has only ever done so while I was using it, and also usually when the system utilization (RAM, CPU, etc.) was not really very high at all, just average stuff like browsing the net (all of the freezes plus one of the BSODs when on mediafire), watching a youtube vid (once) or just randomly while actually doing nothing other than clicking the About tab of Prime95 (just moments AFTER prime95 was already stopped after an 8 hour run, although during the test there were no problems and the CPU did not get anywhere near as hot as largeFFT, and it's never actually crashed during a Prime95 test).

Hopefully I've given some useful information...please ask me anything else if clarification or details are needed. Like I said I can't do too much as far as opening up the PC and messing around goes, but it was setup and tested by professionals and then bugchecked by them for hardware problems once as well...I donno how thorough they were since there is clearly some mild problem which seems to be becoming worse after all these months ...

Not sure if this is relevant but there are absolutely no software/malware issues causing this, since I am very good about that (very safe internet user, windows firewall+hardware firewall, anti-malware program (malware bytes anti-malware), windows defender and avira antivirus). It could be a driver issue I suppose but I'm thinking it's probably hardware? Just a gut feeling. Updating drivers + BIOS did nothing it seems. I don't have any malfunctioning/incompatible with Win7 hardware or drivers either.

I've done things like sfc /scannow before quite a few times. Everything seems in check really, nothing seems to stand out as being problematic, yet this is occurring more and more frequently as time goes on.

http://www.techsupportforum.com/forums/f299/a-clock-interrupt-was-not-received-by-a-secondary-processor-481450.html
Relevancy 100.13%

Hello people i just registered in hope for some fixes This problem appared to me weeks ago Where my BSOD's were quite often no matter what i did However these other days in the week they've been happening every - days But that has also dissapeared Now i BSOD really often when ever the computer feels like it This started happening as i said weeks ago when i changed my Motherboard and Processor Because my old one was a AMD Dualcore on a M N-E Asus AM They both died at the same time So i got myself a ASRock N -S UCC But do note that the first four to five days this didnt happen Everything was fine after changing my hardware So Ive read my minidumps with quot A interrupt processor. 0x00000101 on clock the secondary [BSOD] whocrashed quot and it indicates it is most likely a driver software problem and NOT hardware Yes indeed this is a wall of text but as a gamer i cannot proceed to enjoy my hobby with a BSOD constantly popping up Ill post my specs below and all that CPU [BSOD] A clock interrupt on the secondary processor. 0x00000101 AMD Athlon X Dual Core Ghz [BSOD] A clock interrupt on the secondary processor. 0x00000101 GPU Video Card Nvidia GT RAM Gigabyte Motherboard ASRock N -S UCC My usual temperatures for the CPU are about C at idle and C - C Ingame Same goes with GPU and just about everything else I am running on the latest drivers for all of my components ive tried rolling back to see if the BSOD's dissapear but nope So im guessing it's not those I zipped the Minidump Thank you for your help if you need more info please do ask I want to fix this asap

A:[BSOD] A clock interrupt on the secondary processor. 0x00000101

Here is more info on my computer, i didnt read the "read before posting" sticky until now. My fault!
>What was Original OS installed on your system?
Answer: Windows Vista 64bit Ultimate

>Age of System (Hardware)
Answer: My only old hardware is my 9600, which is from 2007. But i take care of it ..

>Age of OS installation - Have you reinstalled the OS?
Answer: When i changed my hardware i installed Windows 7, pretty much a clean install.

>Power supply - Brand and Wattage
Answer: Could not identify brand, however im running a 600W PSU

http://www.techsupportforum.com/forums/f299/bsod-a-clock-interrupt-on-the-secondary-processor-0x00000101-609654.html
Relevancy 100.13%

In the past few days my computer has been getting a BSOD quite frequently once or twice per hour while playing certain games quot A clock interrupt was not received on a secondary processor within the allocated time interval quot OS Windows Home Premium -bit full retail - Re-installed sometime in May Hardware is about one year old CPU Intel i - K LGA GHz Video Card GT - originally a GTX but I switched it with another computer when the had problems I might go make a separate thread about this Motherboard Asus P P Power Supply Corsair TX W System Manufacturer Not quite sure if this a secondary . on BSOD: clock interrupt . not processor was . recieved applies I purchased the parts of newegg and built it myself Other possibly useful information - BIOS is outdated but I'm not quite sure how to update it or if BSOD: clock interrupt was not recieved on a secondary processor . . . it will help - BSOD most frequently happens while playing Spiral Knights which is the only game I play made with Java as far as I know - This is the first computer I've built so it's quite likely I've done something wrong - My mouse also mysteriously stopped working today The left click no longer does anything The mouse is very cheap and quite old probably unrelated - I had GB RAM x GB I've taken one out put it back and taken out the other I think it's quite unlikely both are broken Both seem fine I've attached the zipped Windows Vista jcgriff folder I put the perfmon report in there too because I wasn't able to upload it alone Edit After reading through some old thread on the same issue one mentioned Daemon Tools and the accompanying driver sometimes causing BSOD I've uninstalled both I'll post again if this fixes the issue

A:BSOD: clock interrupt was not recieved on a secondary processor . . .

Hi,

There are no .dmp's in your attached output folder. Can you manually navigate to c:\windows\minidump and attach any relevant .dmp's you'd like analyzed?

Regards,

Patrick

http://www.techsupportforum.com/forums/f299/bsod-clock-interrupt-was-not-recieved-on-a-secondary-processor-662277.html
Relevancy 98.89%

System that is having the problem is an ASUS Rampage II Gene with Intel i7-920 processor; 6 Gig RAM; and GTX 260 . Power supply is a Coolermaster extreme Powwer plus 600W PS. OS is Windows & 64 bit.

Wife has been experiencing recurring freezes and \or BSOD for a while. She uses the system for playing Warcraft so this is when it is happening. She says that sound will sometimes crackle and buzz at times before the freeze\crash.

I updated with all the O\S patches; all drivers updated, ran driver verifier and Memtest and did full malware scan - all okay.

I just replaced the Hard drive and did clean re install of OS. Issue however has just recurred.

I have attached the following dump file

A:BSOD - Buzzing issues - Clock Interrupt secondary processor

Welcome aboard.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 101, {19, 0, fffff88002f64180, 2}

Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

CLOCK_WATCHDOG_TIMEOUT (101)
An expected clock interrupt was not received on a secondary processor in an
MP system within the allocated interval. This indicates that the specified
processor is hung and not processing interrupts.
Arguments:
Arg1: 0000000000000019, Clock interrupt time out interval in nominal clock ticks.
Arg2: 0000000000000000, 0.
Arg3: fffff88002f64180, The PRCB address of the hung processor.
Arg4: 0000000000000002, 0.

Debugging Details:
------------------
BUGCHECK_STR: CLOCK_WATCHDOG_TIMEOUT_8_PROC

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

PROCESS_NAME: System

CURRENT_IRQL: d

TAG_NOT_DEFINED_c000000f: FFFFF80000BA2FB0

STACK_TEXT:
fffff800`00b9c7e8 fffff800`02b1ed5a : 00000000`00000101 00000000`00000019 00000000`00000000 fffff880`02f64180 : nt!KeBugCheckEx
fffff800`00b9c7f0 fffff800`02ad1ad7 : 00000000`00000000 fffff800`00000002 00000000`000186a0 fffff800`00b96080 : nt! ?? ::FNODOBFM::`string'+0x4e2e
fffff800`00b9c880 fffff800`02a0a895 : fffff800`02a30460 fffff800`00b9ca30 fffff800`02a30460 00000000`00000000 : nt!KeUpdateSystemTime+0x377
fffff800`00b9c980 fffff800`02ac4513 : 00000000`08c48acf fffff800`00b9ca30 fffffa80`078921c8 00000000`00000001 : hal!HalpHpetClockInterrupt+0x8d
fffff800`00b9c9b0 fffff800`02aaf083 : fffffa80`07a41700 00000000`00000801 fffffa80`078926a0 fffff880`0444984b : nt!KiInterruptDispatchNoLock+0x163
fffff800`00b9cb40 fffff800`02ad1099 : 00000000`00000002 fffff880`044747ae 00000000`00000103 00000000`00000095 : nt!KxWaitForSpinLockAndAcquire+0x23
fffff800`00b9cb70 fffff880`044740f7 : fffffa80`078911a0 00000000`00000001 00000000`4f444648 fffffa80`064cf8b0 : nt!KeAcquireSpinLockRaiseToDpc+0x89
fffff800`00b9cbc0 fffff800`02b5146a : fffffa80`064cf8b0 00000000`00000000 00000000`00000000 fffffa80`078911a0 : USBPORT!USBPORT_RhIntrEp_Remove_TxqIrp+0x6f
fffff800`00b9cbf0 fffff880`04473e7c : fffffa80`07891002 fffffa80`07f91870 fffffa80`078911a0 fffff800`00b9cc78 : nt!IoCsqRemoveNextIrp+0x6a
fffff800`00b9cc20 fffff880`044739c8 : 00000000`00000001 fffffa80`00000001 fffffa80`09638950 00000000`00000001 : USBPORT!USBPORT_Rh_IntrEp_Worker+0x104
fffff800`00b9cc70 fffff800`02ad26ec : fffff800`02c3ae80 00000002`00040a02 fffffa80`08d218b0 00000000`00000002 : USBPORT!USBPORT_Ev_Rh_IntrEp_Dpc+0x124
fffff800`00b9ccd0 fffff800`02abfcca : fffff800`02c3ae80 fffff800`02c48cc0 00000000`00000000 fffff880`044738a4 : nt!KiRetireDpcList+0x1bc
fffff800`00b9cd80 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiIdleLoop+0x5a
STACK_COMMAND: kb

SYMBOL_NAME: ANALYSIS_INCONCLUSIVE

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: Unknown_Module

IMAGE_NAME: Unknown_Image

DEBUG_FLR_IMAGE_TIMESTAMP: 0

FAILURE_BUCKET_ID: X64_CLOCK_WATCHDOG_TIMEOUT_8_PROC_ANALYSIS_INCONCLUSIVE

BUCKET_ID: X64_CLOCK_WATCHDOG_TIMEOUT_8_PROC_ANALYSIS_INCONCLUSIVE

Followup: MachineOwner
---------
Follow the guide STOP 0x101: CLOCK_W... Read more

http://www.sevenforums.com/bsod-help-support/261015-bsod-buzzing-issues-clock-interrupt-secondary-processor.html
Relevancy 92.69%

ive been getting these BSOD'S quite frequently i think i may need a new cpu or ram plz help

A:A clock interrupt was not received on a second processor

Bugcheck 101 is mainly caused by a defective CPU or outdated BIOS

Details about this bugcheck:
http://www.sevenforums.com/crash-loc...tml#post567135

Win 7 A Clock Interrupt... BSOD (101 Error)

Go to your motherboard's website and check your version of your BIOS. See if there are any problems you are having that are solved by a a later version. I do not often recommend flashing the BIOS because there is a risk involved. If there is problem addressed by a BIOS that applies to your computer, consider flashing your BIOS to the latest version. If you choose to do this, flash you BIOS outside of Windows.

Run Prime 95 again to test your CPU and your ram. Carefully the instructions in this tutorial: CPU - Stress Test with Prime95. Run 3 separate tests, one on each of the settings (Blend, Small FFTs, Large FFTs). Post back with your results.

http://www.sevenforums.com/bsod-help-support/160151-clock-interrupt-not-received-second-processor.html
Relevancy 90.83%

Hi I am new to this forum clock processor interrupt secondary oXooooo101 and yet already in desperate need of some help I have been building computers for a while now and have not had any problems so far that I could not solve Now I don't know where to start I have purchased the following items VISTA Home premium BIT service pack PSU APEVIA ASP ATX-CW WP RT HD G Western digital K M SATA WD AAKS mainboard clock interrupt secondary processor oXooooo101 ASUS M A -EM AM G SB RT Kingston KHX D T K G R CPU AMD Phenom H X GHz N R Now when I try to install the vista bit I get the famous BSOD Mostly with the error message I stated in the title I dont know what to do Does anyone have any information for me I heard that one hVISTA HM PREM SP BIT PK PSU APEVIA ASP ATX-CW WP RT HD G WD K M SATA WD AAKS MB ASUS M A -EM AM G SB RT Kingston KHX D T K G R CPU AMD Phenom H X GHz N Rast to disable the TBL patch in the BIOS in order for this to work I do not know where to diable this patch on my mainboard Do I need to update my BIOS With what version Can anyone help

A:clock interrupt secondary processor oXooooo101

Hello goldmanjace,

Can you tell us the stop code on the BSOD? This will help pinpoint the problem.

~Lordbob

http://www.vistax64.com/general-discussion/215845-clock-interrupt-secondary-processor-oxooooo101.html
Relevancy 84.63%

I have recently purchased an assembled PC of following configurations Intel i - Ghz GB ddr ram TB hard disk Geforce GB ddr Windows Ultimate BSOD screen with following statement has been appearing frequently - quot a clock interrupt was not received from a secondary processor quot Technical Information STOP x x x xfffff interrupt received not clock - BSOD fd x Initially I thought that BSOD occurs during high load applications But now BSOD occurs once in one or two days even when PC is idle The core temperature is at safe limits - c according to Coretemp I am not overclocking the PC I have informed the condition to the seller PC is under warranty and they checked and removed the graphics card and sent it for repair informing me that problem is with BSOD - clock interrupt not received the GPU I have not received the BSOD - clock interrupt not received graphics card back but I am still having the same BSOD The minidump file is attached Please help me solve this problem Thanks Nav

A:BSOD - clock interrupt not received

Unfortunately 0x101 bugchecks cannot be analyzed without at least a kernel dump. You'll need to provide one by grabbing the MEMORY.DMP file located in your Windows directory, stuffing it in a zip or other archive file, and then uploading it to a 3rd-party filesharing site and sending us a link.

If you wish, you may also turn on Driver Verifier and hope it catches anything.

http://www.techsupportforum.com/forums/f299/bsod-clock-interrupt-not-received-627937.html
Relevancy 84.63%

Hello these are my pc specifications SO Windows bit CPU intel i k Mobo asus p p clock 101 was not BSOD interrupt a received.. m pro rev BIOS version GPU palit Gforce gtx driver version RAM x Gb kingstone Mhz model - A G HD Western digital GB Seagate TB Audio sound blaster x fi fatality champion series Other multicard usb mmc sd reader All drivers and SO are up to date no overclock I've this pc from one year and I experience bsod of type quot a clock interrupt was not received quot I can't figure out the cause because - It happens when I play games but also during the Windows performance evaluation - It happens often but not always for example -I played Skyrim for hours without an error -Need for speed the run crashes often but not always for example last night it crashes times and today same stage I played with no problem but the bsod happened on the next stage - Dragon age origins is unplayable but Dragon age has no problem - I run some stress test for CPU and GPU intel diagnostic tool occt without a single problem During those test the CPU temperature goes up to C but BSOD 101 a clock interrupt was not received.. not a single freeze or bsod happens Please help me if I miss something let me BSOD 101 a clock interrupt was not received.. know BSOD 101 a clock interrupt was not received.. I will give you all the details you ask me but please help me figure out what's the problem I attach the last minidump files PS sorry for my english and sorry if it's not the right place to put this thread Riccardo

A:BSOD 101 a clock interrupt was not received..

Moved to Bsod's App Crashes and Hangs

http://www.techsupportforum.com/forums/f299/bsod-101-a-clock-interrupt-was-not-received-664984.html
Relevancy 84.63%

on a secondary interrupt. I had this problem before, but was solved with changing power settings. But since the last update of tuesday from Windows, the problem reoccurs. I tried to change the power settings, but the problem persists. Can anyone help.

Thanks in advance

A:BSOD, a clock interrupt was not received

Hello Quagga, welcome to Seven Forums. I will try to help you with the problems you are having. All of your dump files were 1 of 2 causes.


Code:
nusb3xhc
start end module name
fffff880`08650000 fffff880`0868b000 nusb3xhc T (no symbols)
Loaded symbol image file: nusb3xhc.sys
Image path: nusb3xhc.sys
Image name: nusb3xhc.sys
Timestamp: Mon Aug 20 23:12:55 2012 (50330AC7)
CheckSum: 000438CA
ImageSize: 0003B000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
That is your NEC Electronics USB 3.0 Host Controller Driver which is owned by Renesas now. Renesas requires registration and a whole lot of research to find drivers, so I would suggest you try to find drivers from your Manufacturer.

The other error code you are getting is


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 124, {0, fffffa80061cd8f8, 0, 0}
Probably caused by : GenuineIntel
Followup: MachineOwner
This is generic Hardware error and does not say which piece of hardware it is. It will almost always blame the CPU, because it is the CPU that detects the Hardware error and throws the code to shut down the computer to avoid any damage, but it is not usually the CPU that is the error.

Please fill out your System Specs


   Information
Your System Specs will help us to help you, and doing it in this manner will make them available to all helpers in every post and keep us from hunting for them. We ask that you fill them out in as much detail as possible including Desktop or Laptop, Model number if it is an OEM computer and all components with the Manufacturer and Model number if possible.

If you will go to your last post and click the 'System Specs' in the bottom left of the post, you will find a link to update your system specs. Please fill those out in as much detail as possible, making sure to click save at the bottom of the page. If you would like to know what we would like, you can click 'My System Specs' at the bottom left of this post to see mine. If you do not know what your components are, this will help you accomplish this task. System Info - See Your System Specs
Open a elevated command prompt ( click start, type cmd in the search box, right click on the cmd entry and select run as administrator) in the black box that opens, copy/paste sfc /scannow. If you decide to type it, notice the space between the sfc and the /. It is a system file checker which will scan your system files and attempt to correct any missing or corrupt files. What we want are the results to say windows found no integrity violations. If it says files were found but could not be repaired, close the box, reboot and run it again, after opening the administrative command prompt. You may have to reboot and run it three times for it to repair all system files. If it can't repair them after 3 reboots, let us know.

Also, please give me any info you can on what activities cause it or what programs you are using that cause it. Anything you can provide will be a help.

http://www.sevenforums.com/bsod-help-support/347737-bsod-clock-interrupt-not-received.html
Relevancy 84.63%

Getting random BSOD on my pc, I think its my processor but I am not 100% sure. Sometimes it happens when im gaming, but I have also had it happen when I just boot up and open 1 window in chrome. Also sometimes programs randomly just close and instead of getting a BSOD the computer will just shut off and for a few seconds then turn back on. :\ I re-installed Windows hoping it would help but it hasn't seemed to make it any better. Ive looked around but I am not very good with this kind of stuff. I have done a windows mem test but it didn't find anything. Any help is much appreciated. Not sure if it helps but my old mobo died on me (the temp sensor went bad) so this mobo is only a few weeks old.

A:BSOD, a clock interrupt was not received

Ran a mem test for over 3 hours found no errors and did a cpu stress test for 2 hours with no issues :/

http://www.sevenforums.com/bsod-help-support/347846-bsod-clock-interrupt-not-received.html
Relevancy 84.63%

Hi everyone my problem is next one
 
a few days ago it started happening that i started getting a BSOD - A clock interrupt was not received error and pretty much dont know what to do, before this i had alot of BSOD everytime am gaming but only when i play a certain game League Of Legends so i formatted my PC from 0 hoping i would'nt encounter more problems but this BSOD is still jumping up
 
http://speccy.piriform.com/results/NXLRhaWx6Dg3Q5vJ70eefEA these are my specs
 
well i hope you guys can give me a hand thanks

A:BSOD - A Clock interrupt was not received

Clock interrupts can be caused by bad drivers or bad overclocking values. The best thing you can do is reset your bios settings to their defaults. This will reset any voltage changes or frequency steppings. If you still receive the BSOD, I would recommend checking for any and all driver updates available.

http://www.bleepingcomputer.com/forums/t/550838/bsod-a-clock-interrupt-was-not-received/
Relevancy 83.7%

Hello People First off I'm sorry if this is a potential duplicate post of someone else's thread I looked through but got relatively confused So i figured i would create an account and upload my data via the SF Diagnostic Tool To state my problem I built my computer about two years ago Around the same time i Clock received/Driver_IRQL_Not_Less_or_Equal BSOD Interrupt Not : occasionally got my most common BSOD which is quot A clock interrupt was not received on a secondary processor quot Throughout the past two years another BSOD that seems to pop up is quot DRIVER IRQL NOT LESS OR EQUAL quot There is a third BSOD but i can't remember it I'm mainly posting because this weekend they released the FF Open Beta I am a pretty big gamer primarily Blizzard games but was excited to play The Clock Interrupt BSOD seemed to BSOD : Clock Interrupt Not received/Driver_IRQL_Not_Less_or_Equal happen every single time i started to play after what seemed like a set amount of minutes It has also happened to me when Playing WOW with Ventrilo up WoW with a video up Elder Scrolls by itself its WAY to frequent and its time i addressed this problem I currently do not overclock my system Computer on average runs around BSOD : Clock Interrupt Not received/Driver_IRQL_Not_Less_or_Equal - c I use two monitors Off the top of my head not sure what else you guys will need I'll post this and check back from time to time I pre-thank anyone who has the time to debug my problem Thank you - Will

A:BSOD : Clock Interrupt Not received/Driver_IRQL_Not_Less_or_Equal

Uninstall your current antivirus as it is contributing to your BSOD's. Replace with Microsoft Security Essentials & the Free version of Malwarebytes, update and make full scans separately:Uninstallers (removal tools) for common antivirus software - ESET Knowledgebase

Help protect your PC with Microsoft Security Essentials

Malwarebytes Free Do not start the trial version of MalwareBytes

You may also take a look at:Good & Free System Security CombinationReduce items at start up:Performing a Clean Startup in Windows 7

Add, or Remove Startup Programs in Windows 7
Your Antivirus software is basically whats just needed there.

Make scans with - TDSSKiller Rootkit Removal Utility Free Download | Kaspersky Lab US

Online Virus Scanner EsetUse the System File Checker tool and Run Disk Check: Repair Windows 7 System Files with System File Checker

Run Disk Check in Windows 7 for Bad Sectors & Errorsasusgsb.sys Thu Sep 27 19:14:50 2007
ASUS Virtual Video Capture Device Driver. Installed as a part of the Asus Gamer OSD utility.
Driver Reference Table - asusgsb.sys

ATKDispLowFilter.sys Wed May 14 09:03:13 2008
ASUSTeK Display Lower Filter. Installed as a part of the Asus Gamer OSD utility.
Driver Reference Table - ATKDispLowFilter.sys

adfs.SYS Fri Jun 27 02:52:37 2008
Adobe File System Driver
Driver Reference Table - adfs.SYS

AiChargerPlus.sys Mon Nov 8 12:48:26 2010
Asus Charger Driver [br] Likely BSOD cause - haven't seen recently (15Jan2013)
Driver Reference Table - AiChargerPlus.sys

ASUSTeK Display Lower Filter software seems to be contributing to the crashes. Please uninstall this software with Revo Uninstaller.



   Information
Download and install Revo Uninstaller free from here: Download Revo Uninstaller FreewareOpt for "Advanced Mode" and uninstall the software (also delete the leftover registry entries).



Upload a screenshot using:CrystalDiskInfo For how to upload a screenshot or file, read here

Test your Hard Drive by running:Hard Drive Diagnostic ProcedureMonitor hardware temperature with system monitoring software like Speccy or HWMonitor:
Piriform - Speccy

CPUID - HWMonitorTest and Diagnose RAM Issues with Memtest86+:RAM - Test with Memtest86+

   Tip
Pay close attention to part 3 of the tutorial "If you have errors"
Test the RAM with Memtest86+ for at least 7-10 passes. It may take up to 22 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold.



Dumps....

Code:
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
Debug session time: Sun Aug 18 08:12:52.629 2013 (UTC + 6:00)
System Uptime: 0 days 0:13:25.784
BugCheck D1, {0, 2, 0, fffff88003d22cbc}
*** WARNING: Unable to verify timestamp for ATKDispLowFilter.sys
*** ERROR: Module load completed but symbols could not be loaded for ATKDispLowFilter.sys
Probably caused by : dxgmms1.sys ( dxgmms1!VidSchDdiNotifyDpcWorker+48 )
BUGCHECK_STR: 0xD1
PROCESS_NAME: System
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
Debug session time: Sun Aug 18 07:58:37.574 2013 (UTC + 6:00)
System Uptime: 0 days 0:14:24.729
BugCheck 101, {21, 0, fffff88002f65180, 2}
Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )
BUGCHECK_STR: CLOCK_WATCHDOG_TIMEOUT_6_PROC
PROCESS_NAME: ffxiv.exe
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
Debug session time: Sun Aug 18 07:43:21.618 2013 (UTC + 6:00)
System Uptime: 0 days 0:06:36.788
BugCheck 101, {21, 0, fffff880030a5180, 5}
Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )
BUGCHECK_ST... Read more

http://www.sevenforums.com/bsod-help-support/301670-bsod-clock-interrupt-not-received-driver_irql_not_less_or_equal.html
Relevancy 82.77%

So i've been getting very regular blue screens only while playing games and I thought it was about time to try and fix this as it has been happeneing nearly every - minutes after playing specifically the games played are bf arma guild wars and counterstrike global offensive The error I get on the blue screen is quot A clock interrupt was not received on a secondary processor within the allocated time interval quot and it's the exact same message every time Sometimes my computer will lock up and play a horrible sounding noise sounds while interrupt BSOD only (clock received) not games playing a bit like quot errrrrrrrttttt quot it will mostly BSOD shortly after but sometimes it even comes back I downloaded BSOD only while playing games (clock interrupt not received) blue screen viewer and it seems from there that a driver called quot ntoskrnl exe quot is the main culprit however some other drivers are showing up as the cause this one ntoskrnl exe seems to be the main one causing it I've attched the mini dump files for the last blue screens My system specs are OS Windows ult bit GPU Ati Raedeon HD CPU i - k GHz Memory gb ripjawsX x gb PSU w corsair cant quite remember Mobo Asus Intel LGA P P -M PRO directX HDD GB SSD with operating system on ocz vertex II TB BSOD only while playing games (clock interrupt not received) internal storage has all games on Note that this is a custom build built by myself I have never overclocked this setup all the bios settings are default the bios is fully up-to-date latest video drivers etc It ran fine for a month or two after first building this I've done stress tests on both the CPU and the graphics card and both seemed fine under loading temperature of the CPU and GPU never BSOD only while playing games (clock interrupt not received) goes higher than degrees and idles at around degrees Any help would be greatly appreciated many thanks

A:BSOD only while playing games (clock interrupt not received)

Hello b1scuits, Welcome to SF!

Lets get started,


Code:
dtsoftbus01.sys Fri Jun 17 02:38:37 2011 (4DFB047D)
Please uninstall all Daemon Tools software, as this is a known cause for problems.

But this could be a possible overheating. So make sure ALL of your fans are running while the computer is turned on.

Could also be a hardware problem, so give this a go:






Quote:
BugCheck 0x124


   Warning
Before you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. WARNING: The steps that follow can void your warranty!!!

For your hardware stop 0x124 crash, read through Stop 0x124 - what it means and what to try and use the following hardware checks to supplement that link.
If you are overclocking any hardware, please stop.

If you have an SSD, make sure the following are up to date:SSD firmware
BIOS Version
Chipset Drivers
Hard disk controller drivers/SATA drivers
If you have a Marvell IDE ATA/ATAPI device, make sure the drivers are up to date from the Intel site or Marvell site and not from your motherboard/vendor support site.

Run all but the advanced tests with SeaTools for HDDs.SeaTools for Windows

SeaTools for DOS
Monitor temperatures during the following tests. Use the following programs to monitor the temperatures. Real Temp is a good CPU temperature monitor.
Speccy - System Information - Free Download will monitor all hardware temperatures.
HWiNFO, HWiNFO32 & HWiNFO64 - Hardware Information and Analysis Tools can be inaccurate for CPU temperatures, but is a good program for GPU temperature monitoring.
Use FurMark: VGA Stress Test, Graphics Card and GPU Stability Test, Burn-in Test, OpenGL Benchmark and GPU Temperature | oZone3D.Net to test the graphics card GPU. Let it run until the GPU temperatures even out or until the GPU temperatures reach a dangerous level (you can find the max temperature for your card on either the nVidia or AMD sites; if you are not sure, ask us). The goal is to get a steady temperature, find out if the GPU is overheating, or to see if there are any artifacts present in the test itself: look for strange pixelated patterns on the screen or colors that do not look like they belong. Then use the |MG| Video Memory Stress Test 1.7.116 Download to test your graphics card memory. Let the memory test run for at least seven passes; the more the better.

Run Hardware - Stress Test With Prime95 to determine any hardware problems. Run all three tests for a few hours each. If you get errors, stop the test and post back here.

Follow the steps for doing CPU stress test using IntelBurnTest

Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).

For Part 3: If You Have Errors: If you swap any memory components, follow these steps for ESD safety:Shut down and turn off your computer.
Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working. If you do not have an anti-static workbench, desk, or pad, you can use your computer tower/case by finding a ... Read more

http://www.sevenforums.com/bsod-help-support/242190-bsod-only-while-playing-games-clock-interrupt-not-received.html
Relevancy 82.77%

Seven Forums Problem Report Jul Problem System crashes at random intervals e g crashed with Blue Screen on Tues Wed Wed Thur Who Crashed stated Bug check description This indicates that an expected clock interrupt received allocated - interval interrupt BSOD not within Clock on a secondary processor in a multi-processor system was not received within the allocated interval The expected clock interrupts message has appeared in every blue screen crash Actions Taken Ran Resplendence WhoCrashed Ver Ran Systweak Advanced System Optimizer Disk BSOD - Clock interrupt not received within allocated interval Tools Chkdsk f Ran Memtest - ran Memtest for two hours - test failed with errors on test repeated test twice interrupted after hours No errors were detected Ran fourth test with the following options memtest onepass maxcpus ttstlist No errors were detected Ran Memtest overnight hours No errors were detected Ran Speedfan no temperature problems reported Successfully reinstalled the drivers originally installed on the system by Puget Systems Chipset Intel Management Engine Intel SATA driver Video Driver Ethernet Driver Marvel SATA Driver USB Driver Onboard Audio Driver Ran DriverAgent and Advanced System Optimizer listed out-of-date drivers did not install updates Ran Driver Verifier Crashed dump is included Disabled Verifier Downloaded and ran SF Diagnostic Tool Ran CPU-Z and created screen shots Attached Who Crashed Crash Dump Analysis minidump for most recent crash SF diagnostics results CPU-Z screen shots Ran Seagate SeaTools for Windows Long Generic on both hard drives Passed with no problems reported Earl B Stroup earlstroup comcast net PM

A:BSOD - Clock interrupt not received within allocated interval

Hello earlstroup. All your BSODs are stop 0x101.

Code:
CLOCK_WATCHDOG_TIMEOUT (101)
An expected clock interrupt was not received on a secondary processor in an
MP system within the allocated interval. This indicates that the specified
processor is hung and not processing interrupts.
Let us have a deeper look.

AVG is contributing to your BSODs.

Code:
fffff880`04f4c7c8 fffff880`0440113cUnable to load image \??\C:\Windows\system32\drivers\avgtpx64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for avgtpx64.sys
*** ERROR: Module load completed but symbols could not be loaded for avgtpx64.sys
avgtpx64+0x113c
Description here: Driver Reference Table - avgtpx64.sys

I'd suggest you to uninstall AVG. Moreover ....
Start Menu\Programs\McAfee Security Scan Plus
Start Menu\Programs\Norton Internet Security
Multiple antivirus is not anything good. They will cause your system unstable at the end. Uninstall McAfee Using McAfee Removal Tool. Uninstall Norton and all Symentec products using Norton Removal tool. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.
Download, install and update those, and then run full system scans with both of them, one by one.

The Realtek network driver is failing too.

Code:
BugCheck 101, {19, 0, fffff88003789180, 7}

*** WARNING: Unable to verify timestamp for Rt64win7.sys
*** ERROR: Module load completed but symbols could not be loaded for Rt64win7.sys
Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )

Followup: MachineOwner
---------
And the driver is old.

Code:
fffff880`05c27000 fffff880`05cda000 Rt64win7 T (no symbols)
Loaded symbol image file: Rt64win7.sys
Image path: \SystemRoot\system32\DRIVERS\Rt64win7.sys
Image name: Rt64win7.sys
Timestamp: Tue Jun 12 19:30:29 2012 (4FD74B7D)
CheckSum: 000B8CFC
ImageSize: 000B3000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Update it from Realtek. Get the Win7 and WinServer 2008 R2 Auto Installation Program dated 2013/5/22.

Same for the Intel(R) HD Graphics 3000 driver.

Code:
fffff800`049f0d28 fffff880`053146e2Unable to load image \SystemRoot\system32\DRIVERS\igdkmd64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for igdkmd64.sys
*** ERROR: Module load completed but symbols could not be loaded for igdkmd64.sys
igdkmd64+0x716e2
And that is old, too.

Code:
fffff880`05669000 fffff880`05b7efa0 igdkmd64 (deferred)
Image path: \SystemRoot\system32\DRIVERS\igdkmd64.sys
Image name: igdkmd64.sys
Timestamp: Thu Oct 18 00:42:29 2012 (507F031D)
CheckSum: 0051C6DC
ImageSize: 00515FA0
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Update the Intel HD Graphics Driver, either from our forum link, Latest Intel HD Graphics Driver for Windows 7, or You may get it from Intel Download Center.
Moreover, you may run the Intel (R) Driver Update Utility to auto detect the appropriate driver for your computer.

Intel RST driver is also failing here.

Code:
BugCheck 101, {19, 0, fffff88003765180, 2}

*** WARNING: Unable to verify timestamp for iaStor.sys
*** ERROR: Module load completed but symbols could not be loaded for iaStor.sys
Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )

Followup: MachineOwner
---------
Get rid of intel rapid storage. First uninstall it from Control Panel > Programs and Features. Then Uninstall the driver from device manager.
Right click on "my computer" icon and click "manage" on the context menu.
It will open the "computer management" window.
Select "Device Manager" in the left pane, It will list all the existing devices up.
Expand "IDE ATA/ATAPI controllers" by clicking on the triangle in front of it.
Select one Intel device item under it, right click, uninstall.
Continue th... Read more

http://www.sevenforums.com/bsod-help-support/299154-bsod-clock-interrupt-not-received-within-allocated-interval.html
Relevancy 81.84%

I will try to provide as much information as I can so that anyone willing can please help me out -I've ran both the FurMark test and the Prime tests Both tests seemed to have stabilized temperature readings after running them for a while and the laptop continued to run fine -Typically my cursor will hang or freeze and then the BSOD occurs - I see very briefly display glitches for half a second before the BSOD -The error states quot A clock interrupt was not received on a secondary processor quot BlueScreenView shows bug check code of x -This doesn't happen when I'm playing games played Singularity on high settings for hours on end it does happen more frequently when I have many tabs or windows open in Chrome -I have tried to run MemTest but it doesn't even go through a full pass before shutting down around the mark typically about secon..... Error: interrupt not was received BSOD, clock Random on A a minutes into the process The computer just shuts down but I noticed no errors are reported before that happens -I have done a complete reinstall of Windows but the error still persists Also I get an error when trying to generate the Performance report that says that it quot timed out quot so I am unable to provide that in my zip file I have run the Driver Verifier and selected all the drivers that weren't provided by Microsoft and restarted but didn't get any BSOD I haven't tried it with the Microsoft drivers checked Also does it run in the background on startup or am I supposed to see something - I didn't see anything when it boot up into Windows I would be immensely appreciative for any help Thank you ----------------- Specs -Win x -Original install -OEM -Age of hardware Oct -Age of OS since I just reinstalled it a few hours ago The laptop Samsung Series quot Laptop Staples

A:Random BSOD, Error: A clock interrupt was not received on a secon.....

Unfortunately, 0x101 bugchecks cannot be analyzed properly unless we have access to at least a kernel dump. You'll need to provide us the latest MEMORY.DMP file located in your Windows directory. It's a biggy, so zip it up and then upload it to a 3rd-party filesharing site so we can take a look at it.

http://www.techsupportforum.com/forums/f299/random-bsod-error-a-clock-interrupt-was-not-received-on-a-secon-628288.html
Relevancy 81.84%

I will try to provide as much information as I can so that anyone willing can please help me out -I've ran both the FurMark test and the Prime tests Both tests seemed to have stabilized temperature readings C after running them for a while and the laptop continued received secon..... A was Error: interrupt on a Random not BSOD, clock to run fine -Typically my cursor will hang or freeze and then the BSOD occurs - I see very briefly Random BSOD, Error: A clock interrupt was not received on a secon..... display glitches for half a second before the BSOD -The error states quot A clock interrupt was not Random BSOD, Error: A clock interrupt was not received on a secon..... received on a secondary processor quot BlueScreenView shows bug check code of x -This doesn't happen when I'm playing games played Singularity on high settings for hours on end it does happen more frequently when I have many tabs or windows open in Chrome -I have tried to run MemTest but it doesn't Random BSOD, Error: A clock interrupt was not received on a secon..... even go through a full pass before shutting down around the mark typically about minutes into the process The computer just shuts down but I noticed no errors are reported before that happens -I have done a complete reinstall of Windows but the error still persists Also I get an error when trying to generate the Performance report that says that it quot timed out quot so I am unable to provide that in my zip file I have run the Driver Verifier and selected all the drivers that weren't provided by Microsoft and restarted but didn't get any BSOD I haven't tried it with the Microsoft drivers checked Also does it run in the background on startup or am I supposed to see something - I didn't see anything when it boot up into Windows I would be immensely appreciative for any help Thank you ----------------- Specs -Win x -Original install -OEM -Age of hardware Oct -Age of OS since I just reinstalled it a few hours ago The laptop http www staples com Samsung-Serie product

A:Random BSOD, Error: A clock interrupt was not received on a secon.....

Start with STOP 0x101: CLOCK_WATCHDOG_TIMEOUT troubleshtg, and then let us know if you need further assistance.

http://www.sevenforums.com/bsod-help-support/212257-random-bsod-error-clock-interrupt-not-received-secon.html
Relevancy 102.77%

So I just built my first not was Interrupt Non-random "Clock received..." BSOD computer Everything went good for about hours I installed the OS updated drivers installed basic programs ran the Windows Experience Index thingy booted Anno and tested a Non-random BSOD "Clock Interrupt was not received..." variety of high graphics settings so on and so forth and everything was good Until on one of my reboots I went into the BIOS and changed the setting from Normal to Performance mode I'm running a Asus Sabertooth FX motherboard Then I booted and ran the Experience Index program again to see if anything would change This time when it was checking CPU performance it BSOD'ed quot Clock Interrupt was not received on a secondary processor within the allocated time interval quot I went into the BIOS and changed the setting back to Normal mode and then tried the WEI again BSOD I tried again and it crashed I ran OCCT for my CPU and everything was good Ran it on my GPU and it was good I ran FurMark for my GPU fine But if I use OCCT to stress my CPU and FurMark to stress my GPU at the same time quot Clock Interrupt was not received on a secondary processor within the allocated time interval quot So far I've come up with theories My GT graphics card is trying to pull too much power from my motherboard and crashing the GT doesn't have external power or My processor is bad I'll run more tests tomorrow to see if any alternate configurations have a different effect Until then I'll leave you with my specs and thank you in advance for any help AMD FX- Asus Sabertooth FX EVGA GT x Cooler Master GX W Windows Professional -bit P S I've ordered a graphics card that draws its power from the PSU to test my first theory EVGA GTX but I won't get it for to days

A:Non-random BSOD "Clock Interrupt was not received..."

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

If you are overclocking STOP
We could also use some system information, which you can get easily by running msinfo32.
To do that go to start>run>type msinfo32>enter

When it is finished running go to file>save>name it and upload to us here.
You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.



To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

http://www.sevenforums.com/bsod-help-support/224029-non-random-bsod-clock-interrupt-not-received.html
Relevancy 102.34%

First my computer details HP Pavilion e t Core i - ghz Gb DDR- nVidia GeForce w Gig Hauppauge WinTV HVR- Soundblaster x-fi extreme Windows Ultimate -bit I've had an ongoing blue screen problem whenever I was playing back video This was both internet based playback but also TV video in the media center as well I updated all the video and TV card drivers as well as the BIOS no change I ran a complete hardware diagnostic and no problems Interrupt and Clock hyperthreading received not were found The particular blue screen error was quot clock interrupt not received from peripheral within the required time interval quot The computer would reset before the crash dump could complete After trying every suggested fix I could Clock Interrupt not received and hyperthreading find I came across a somewhat related forum post on the internet that called into question the hyperthreading feature of the i So as and experiment I went into the BIOS and disabled hyperthreading So far the problem has disappeared I'm convinced the problem was in one of the drivers but I could never track down which one But it appears that the bug was related to how it was handling the hyperthreading feature Turn off hyperthreading and bug cannot exhibit itself I'm sure the bug is still there but at least the BSODs are gone for now I'm curious if anyone else has seen this problem and if they've done the same thing to resolve it

A:Clock Interrupt not received and hyperthreading

Although there's not a lot of info about this on the web, take a look here for what I was able to gather: BSOD Index

If the problem was that the unknown program couldn't handle working processors that are using HyperThreading - then the fix is to figure out which program it is. Disabling HyperThreading may stop it - but that will also slow down the system.

I'd suggest looking at all of your installed devices and programs - and start with the oldest one first.
Uninstall it and test to see if it fixes the problem.
If not, remove the next one and so on - until you've found the offending device.

This presumes that there isn't a problem with the processor or with Windows

http://www.sevenforums.com/bsod-help-support/86807-clock-interrupt-not-received-hyperthreading.html
Relevancy 99.33%

Since like a month ago my pc started to freeze up at random points in time It's not like it freezes with a particular game or software it just randomly freezes altough it usually freezes during games i guess it uses a lot of power and i can't even get the task manager up not even the num lock key on the keyboard works All I can do is keep pressing the power button Now interrupt was Death of on clock received Screen a - A not seconda Blue today for the first time I got a blue screen of death quot A clock interrupt was not received on a secondary processor within the allocated time interval quot I restarted the pc and after approx hrs it froze again but this time no blue screen I've reset the bios to default i've run memtest in boot mode and no errors were found i ran cpu test using OCCT and no errors were found i am currently running a gpu stress test using OCCT with minutes left and no errors are currently found I literary don't know what else to do or test I really Blue Screen of Death - A clock interrupt was not received on a seconda take Blue Screen of Death - A clock interrupt was not received on a seconda good care of my pc i clean it up every other week uninstall unnecessary software defragement the hard drive Blue Screen of Death - A clock interrupt was not received on a seconda and run virus scans frequently MY SPECS - Intel Core i Asus P T SE Motherboard Corsair GB DDR Triple Channel XMS Gainward GTX mb EzCool W PSU OS - Windows Home Premium Bit

A:Blue Screen of Death - A clock interrupt was not received on a seconda

hi there
please follow this guide line to help the forum users help you with this issue i am no expert in BSOD but check bios updates (helped me in my time of this problem) check all drivers for updates and any new programs/hardware installed prior to blue screening use the hardware/program websites. BSOD - Posting Instructions http://www.sevenforums.com/crashes-d...tructions.html

http://www.sevenforums.com/bsod-help-support/148671-blue-screen-death-clock-interrupt-not-received-seconda.html
Relevancy 98.04%

See Title. No pattern has developed when the crashes happen. When idle, Kernel Data Inpage error occurs and clock interrupt not received on secondary processor occurs all the time. Happens very frequently. More than once or twice a day. I will be attaching some DMP files but connection keeps getting reset right now.

I RMA'd or replaced pretty much everything in my build including: CPU, Motherboard, PSU.

Ran Memtest on 1 stick of RAM minimum of 8 times. Repeated for all 4 sticks of ram.

Updated BIOS

Tried without NAV.

Tried running with 2 sticks of ram at a time, then replaced the ram with the other 2 sticks.

Reinstalled windows on different HDDs.

Replaced Thermal paste on heatsink (went with Arctic Silver 5)
^This is when the Kernel Data Inpage Error showed its face.

Ran Chkdsk. Fine.

Gonna Run memtest86 for about 24 hours starting now.


!!!The MEMORY.DMP file is too big to upload. its like 535MB any suggestions? Do We need this?

A:Kernel Data Inpage Error AND clock interrupt not received BSODs

Welcome aboard, Raven45.

► Uninstall Norton Internet Security. Use Microsoft Security Essentials - Free Antivirus for Windows

Code:
fffff880`03377c08 fffff880`03eecd5eUnable to load image \??\C:\Windows\system32\Drivers\SYMEVENT64x86.SYS, Win32 error 0n2
*** WARNING: Unable to verify timestamp for SYMEVENT64x86.SYS
*** ERROR: Module load completed but symbols could not be loaded for SYMEVENT64x86.SYS
SYMEVENT64x86+0x19d5e
► Update nVidia Driver.
Download and install |MG| Driver Fusion (Driver Sweeper) 1.1.1 Download.
Reboot the computer in Advanced Boot Options, safe mode. Search Driver Fusion in your start menu, and remove all components of your nVidia display driver.
Boot normally now. Go to Drivers - Download NVIDIA Drivers, follow option two to search for the appropriate driver for your system automatically, and install it.

Code:
fffff880`03377888 fffff880`100dbd84Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
nvlddmkm+0x254d84
fffff880`03377890 00000000`00000000
fffff880`03377898 00000000`00000000
fffff880`033778a0 00000000`00000000
fffff880`033778a8 fffff880`100dbd84 nvlddmkm+0x254d84
fffff880`033778b0 00000000`00000000
fffff880`033778b8 00000000`00000000
fffff880`033778c0 00000000`00000000
fffff880`033778c8 fffff880`100dbd84 nvlddmkm+0x254d84
fffff880`033778d0 00000000`00000000
fffff880`033778d8 fffff880`03377bf0
fffff880`033778e0 fffffa80`07ce6000
fffff880`033778e8 fffff880`10091416 nvlddmkm+0x20a416
===========================================================
kd> nvlddmkm
^ Syntax error in 'nvlddmkm'
0: kd> lmvm nvlddmkm
start end module name
fffff880`0fe87000 fffff880`10ba5000 nvlddmkm T (no symbols)
Loaded symbol image file: nvlddmkm.sys
Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
Image name: nvlddmkm.sys
Timestamp: Fri Feb 10 07:32:58 2012 (4F347AD2)
CheckSum: 00D075A7
ImageSize: 00D1E000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

► upgrade the network driver:

1] download the network card driver from manufactuer's website.
2] Then reinstall the driver:
3] Click the Start Button, type "devmgmt.msc" (without quotation marks) in the Start Menu Search box and press Enter.
4] Double click to expand "Network adaptors".
5] Right click your network card and click Uninstall.
6] Check "Delete driver software for this device" check box, click OK.
7] Restart the computer

If windows does not auto configure the appropriate drivers at startup, install the downloaded one manually.
Let us know the results.

http://www.sevenforums.com/bsod-help-support/255603-kernel-data-inpage-error-clock-interrupt-not-received-bsods.html
Relevancy 87.72%

Hey everyone Hope I can get some help here with a troublesome BSOD i just can't fix Randomly while playing games my computer will crash and will give me a A clock interupt was not recieved on a secondary processor BSOD I would like to fix if possible because I know If I take it to a computer store They'll tell me that my processor is faulty and it may be and charge me for a new one So I would like to know for myself before I fork out that kind of money When it comes to software I'm not the most educated but with interupt secondary A not processor. clock on was recieved a hardware I know most of A clock interupt was not recieved on a secondary processor. it building my computer myself So I'm hoping someone can explain an easy way to resolve this Tests I need to perform etc Nothing was changed that started the BSOD's The computer ran in it's current setup for about months before the BSOD's started Specs are as follows Mainboard ASUS P Z DELUXE GEN Chipset Intel Z Processor Intel Core i K MHz Physical Memory MB x DDR -SDRAM Video Card NVIDIA GeForce GTX TI If any other Specs are needed let me know PREEASEE help me

A:A clock interupt was not recieved on a secondary processor.

Please read through and follow all instructions for posting your blue screen logs and reports.http://www.techsupportforum.com/foru...ta-452654.html

http://www.techsupportforum.com/forums/f299/a-clock-interupt-was-not-recieved-on-a-secondary-processor-682196.html
Relevancy 86%

Hello,

Please analyze my dump file. Earlier my system used to freeze with sound loop while playing bf4,but now the situation is such that the system bsod even while writing this thread. Please help.
BSOD message: "Clock interrupt was not received on a secondary processor"
Things I have done so far : Updated / downgraded graphics drivers (ATI) , Memory test resulted positive.
Updating the BIOS is what is left

Thank you

Config : R9 280X vapor-x 3 gb OC edition graphic card, i5 4670k intel process, 8gb 1333mhz vengence Ram, Motherboard- Asus Z87 killer fatality edition.

A:Bsod even after driver updatesClock interrupt not received second. pro

Hello, Welcome to SF!


Code:
Version 6.1.7600 Build 7600
Having SP1 can be the main fix to your problems. Download Windows 7 and Windows Server 2008 R2 Service Pack 1 (KB976932) from Official Microsoft Download Center


Code:
sptd.sys Sun Oct 11 15:55:14 2009 (4AD24632)
This driver belongs to Daemon Tools which is a known issue with Windows. Please uninstall using this tool: DuplexSecure - Downloads

After you do these, if you get any more BSODs post up the new files.

-Justin

http://www.sevenforums.com/bsod-help-support/349316-bsod-even-after-driver-updatesclock-interrupt-not-received-second-pro.html
Relevancy 84.71%

Dell Studio XPS mt OS - Windows Home Premium x Age of system - 'Clock BSOD interrupt...' months Age of OS installation - month CPU - BSOD 'Clock interrupt...' Intel Core i GHz Video Card - Nvidia GTX Sound Card BSOD 'Clock interrupt...' - Creative PCI-e Sound Blaster X-Fi Xtreme Audio MotherBoard - X Power Supply - Antec TruePower New TP- ATX V V Hard Drive - Western Digital Caviar Black WD FALS TB the factory HD When I first owned the computer it never crashed This is because it only gives the BSOD when I am running a lot of applications and I just recently started to game again For the most part I slapped on all these upgrades within a short period of time My first BSOD happened when I was playing WoW and had Media Player Classic running on the secondary monitor The sound began to distort and the processes seemed to chop up I updated the video card and sound card drivers and there was no change I disabled the onboard sound via the BIOS setup I also did a format and clean install of Win No change I have been running it with the case open for the past few months because I thought it was a heating problem I'm not sure if it helps or not I will also get a hard drive click every so often It hangs for a second or two and everything will continue to run as normal from there on out until the next click I did some research and read that it could be a possible BIOS problem I flashed to latest and that did make a noticable improvement but it did not fix the problem Now I AM able to run WoW Media Player Classic Itunes and a bunch of Internet Explorer tabs with no problems However I get the BSOD when I run WoW and Starcrat Beta at the same time The sound will start to distort and not long after the BSOD will appear with the quot Clock interrupt quot message

A:BSOD 'Clock interrupt...'

upgrade

http://www.newegg.com/Product/Produc...corsair%2b750w

http://www.techsupportforum.com/forums/f299/bsod-clock-interrupt-463409.html
Relevancy 84.71%

Hi

Recently im having preety random bsod with error:
"a clock interrupt was not received on a secondary processor within the allocated time interval"

I searched google and this forum, and tryed all things i could find. But problem still remains and im getting flustrated more and more : (

i uninstaled demontools (along with the sptd.sys driver), reinstaled video drivers, updated some of asus drivers (otherwise im using windows update to keep everything up to date), i buyed new ram, did sfc /scannow, did chkdsk /r, runned driver verifier about 50 times now and still no resoults. I havent instaled nothing new in hardware or software. Can someone help me ?

A:bsod (a clock interrupt was not ...)

Please provide this info for a more detailed analysis: http://www.techsupportforum.com/foru...ta-452654.html

Troubleshooting steps for the Clock Watchdog Timeout error (STOP 0x101): STOP 0x101: CLOCK_WATCHDOG_TIMEOUT troubleshtg - Windows 7 Forums

Most likely the error is caused by the outdated version of ASACPI.sys installed on your system (it comes from Windows Update). Please visit this link at the Asus website to download the latest version for your motherboard. The driver is the 3rd one under the Utilities section and is called "ATK0110 driver for WindowsXP/Vista/Win7 32&64-bit": http://support.asus.com/download/dow...us&model=M2N-E

Another common cause of BSOD's in Win7 is the sptd.sys driver in Daemon Tools/Alcohol 120%. Please uninstall that program immediately, and then use this free tool to ensure that the sptd.sys driver has been removed from your systetm: DuplexSecure - FAQ

Your mouse driver is very old (from 2007) and could also be causing problems. Please uninstall the mouse software and reboot to see if that helps.

It's also possible that COMODO is causing problems, but we'll leave that until last as I didn't spot anything that obviously points to it.

OLDER DRIVERS PRESENT IN THE DUMP FILES
- Create a System Restore Point prior to doing any of this. DO NOT mess with the drivers themselves - leave the Windows\System32\drivers directory alone unless we specifically direct you to it!
- Please update these drivers from the device manufacturer's website - or uninstall them from your system. Reference links are included below.
- DO NOT use Windows Update or the Update Drivers function of Device Manager.
- Please feel free to post back about any drivers that you are having difficulty locating.
- Windows Update exceptions may be noted below for Windows drivers:

Quote:





Code:

nvstor.sys Fri Mar 19 16:45:11 2010 (4BA3E257)
winhv.sys Sat Nov 20 04:20:02 2010 (4CE792C2)
vmbus.sys Sat Nov 20 04:57:29 2010 (4CE79B89)
sptd.sys Tue Nov 23 06:47:37 2010 (4CEBA9D9)
amdxata.sys Fri Mar 19 12:18:18 2010 (4BA3A3CA)
dtsoftbus01.sys Thu Jan 13 03:27:08 2011 (4D2EB75C)
nvm62x64.sys Fri Oct 17 17:01:06 2008 (48F8FD12)
PdiPorts.sys Sat Jun 21 21:01:19 2008 (485DA45F)
ADIHdAud.sys Thu Jan 03 09:57:39 2008 (477CF7E3)
nvhda64v.sys Tue Sep 07 16:08:40 2010 (4C869BC8)
LGPBTDD.sys Wed Jul 01 14:47:52 2009 (4A4BAF58)
whfltr2k.sys Fri Jan 26 03:04:37 2007 (45B9B615) - Presenter/Trust Mouse 14831 USB Lower Filter Driver
dump_nvstor.sys Fri Mar 19 16:45:11 2010 (4BA3E257)
adfs.SYS Thu Jun 26 16:52:37 2008 (48640195)
cpuz134_x64.sys Fri Jul 09 07:16:58 2010 (4C37052A)
LGVirHid.sys Mon Nov 23 20:36:48 2009 (4B0B38B0)
LGBusEnum.sys Mon Nov 23 20:36:48 2009 (4B0B38B0)
ASACPI.sys Sun Mar 27 22:30:36 2005 (42476C4C)
cmdguard.sys Wed Jan 05 12:10:43 2011 (4D24A613)
nvlddmkm.sys Sat Oct 16 13:12:46 2010 (4CB9DD0E)
nvBridge.kmd Sat Oct 16 13:06:16 2010 (4CB9DB88)

http://www.carrona.org/dvrref.html#nvstor.sys
http://www.carrona.org/dvrref.html#winhv.sys
http://www.carrona.org/dvrref.html#vmbus.sys
http://www.carrona.org/dvrref.html#sptd.sys
http://www.carrona.org/dvrref.html#amdxata.sys
http://www.carrona.org/dvrref.html#dtsoftbus01.sys
http://www.carrona.org/dvrref.html#nvm62x64.sys
http://www.carrona.org/dvrref.html#PdiPorts.sys
http://www.carrona.org/dvrref.html#ADIHdAud.sys
http://www.carrona.org/dvrref.html#nvhda64v.sys
http://www.carrona.org/dvrref.html#LGPBTDD.sys
http://www.carrona.org/dvrref.html#dump_nvstor.sys
http://www.carrona.org/dvrref.html#adfs.SYS
http://www.carrona.org/dvrref.html#cpuz134_x64.sys
http://www.carrona.org/dvrref.html#LGVirHid.sys
http://www.carrona.org/dvrref.html#LGBusEnum.sys
http://www.carrona.org/dvrref.html#ASACPI.sys
http://www.carrona.org/dvrref.html#cmdguard.sys
http://www.carrona.org/dvrref.html#nvlddmkm.sys
http://www.carrona.org/dvrref.html#nvBridge.kmd
... Read more

http://www.techsupportforum.com/forums/f299/bsod-a-clock-interrupt-was-not-586548.html
Relevancy 84.71%

Windows 7 shuts down with message "A clock interrupt was not received on a secondary processor within the alloted time interval."

I have an EliteGroup A780GMA motherboard.

A:BSOD - clock interrupt

Please download BlueScreenView BlueScreenViewNo installation required.Unzip downloaded file and double click on BlueScreenView.exe file to run the program.When scanning is done, go Edit>Select All.Go File>Save Selected Items, and save the report as BSOD.txt.Open BSOD.txt in Notepad, copy all content, and paste it into your next reply.

http://www.bleepingcomputer.com/forums/t/378652/bsod-clock-interrupt/
Relevancy 84.71%

Hi I am on from Clock interrupt [BSOD] a clean install of Windows from previous W amp HDD crash see previous thread Yesterday I experienced my very first BSOD since the install And today it happened again Here's my computer Windows Ultimate Guenuine and not an update AMD FX- Asus Sabertooth FX R nVidia GeForce GTX Using NOD amp ZoneAlarm [BSOD] Clock interrupt along with Malwarebyte's Anti-Malware I read the minidumps with WhoCrashed and here's [BSOD] Clock interrupt the report Quote On Sun - - GMT your computer crashed crash dump file C Windows memory dmp This was probably caused by the following module rt win sys Rt win xA Bugcheck code x x x xFFFFF F x Error CLOCK WATCHDOG TIMEOUT file path C Windows system drivers rt win sys product Realtek PCI PCIe Adapters company Realtek description Realtek NDIS -bit Driver Bug check description This indicates that an expected clock interrupt on a secondary processor in a multi-processor system was not received within the allocated interval This appears to be a typical software driver bug and is not likely to be caused by a hardware problem This problem might be caused by a thermal issue A third party driver was identified as the probable root cause of this system error It is suggested you look for an update for the following driver rt win sys Realtek NDIS -bit Driver Realtek Google query Realtek CLOCK WATCHDOG TIMEOUT As I write this I am Googleing quot Realtek CLOCK WATCHDOG TIMEOUT quot to see if I can find any info Everything is up to date BUT Windows Service Pack is NOT installed since it fails everytime using Windows Update to install it It hangs on quot Preparing to configure Windows quot and stays there Tried to hard reboot it no change Have to go in safe mode and wait for it to revert then reboot again I dont know if it has to do with something about my BSODs Thanks for input Maesen

Relevancy 83.85%

I've been plagued by BSOD errors A clock interrupt was not received blah blah the last few days Specs are attached in the report zip and updated on my profile here Also attaching the last few dump files I've analyzed them myself but Interrupt... Error) Win BSOD Clock A 7 (101 can't decipher exactly what the problem is I have a theory it may be related to how I have my HDD's and programs organized I'm using a GB HDD with just Windows Microsoft Outlook and a few 'core' apps installed on Almost everything else games Firefox misc apps I routed to the TB HDD Win 7 A Clock Interrupt... BSOD (101 Error) I suspect this is a issue because I get alot of BSOD when using Firefox using IE to type this now iTunes or playing various games all of which are installed to the nd HDD Also I was getting alot of random shutdowns when using Vista prior to Win install The shutdowns would happen whenever I was doing anything graphic intensive and the system would just shutdown No BSOD no warning just turned off After installing Win the system would still crash but reboot however my mouse and keyboard would be locked out unless I powered down the entire system After eliminating any software Win 7 A Clock Interrupt... BSOD (101 Error) issue I ended up taking everything off the mobo reseating the mobo to the case and methodically reseating every piece of hardware carefully as well as doing a fresh Vista-- gt Win install That seemed to solve the 'random shutdowns' but now i'm getting BSOD all the time All drivers are updated BIOS updated chipset etc etc Win 7 A Clock Interrupt... BSOD (101 Error) Anyway I hope someone will be able to spot something I've missed I appreciate any help

A:Win 7 A Clock Interrupt... BSOD (101 Error)

In no particular order:

sfc /scannow should be run from elevated command prompt.

Look into AMD forums or AMD website for "tlb" fix.

Completely uninstall AVG from system. Run memtest for as long as you can stand to.

Scan with Malwarebytes.

Use event viewer to click on links as bottom to get Microsoft's recommendations for each error.

Disable floppy support in bios if not used. Better to completely detach from system. Disable all unused ports in the bios, namely, serial. Disable RAID controller in device manager if not in use. (I see you have no driver installed for it now.)

Unlrelated, but get Bonjour off the system the proper way. Google is helpful here.

http://www.sevenforums.com/bsod-help-support/35427-win-7-clock-interrupt-bsod-101-error.html
Relevancy 83.85%

Hi I have been experiencing BSODs recently At first I BSOD [SOLVED] - Clock Interrupt thought it was my graphics card failing so I tried to use the on-board graphics card but it didn't solve the problem My hunch is probably the BIOS but I don't know how to validate it I updated my BIOS about a month ago through MSI Live Update Utility I did not experience crashes right away until a few days later and recently it's getting worse This is the message that usually appears on BSOD screen quot A clock interrupt was not received on a secondary processor within the allocated time interval quot Sometimes it says quot An Uncorrectable error occurred quot Not sure about the exact [SOLVED] BSOD - Clock Interrupt words here Please help me find [SOLVED] BSOD - Clock Interrupt the problem My computer is under warranty but it might take weeks for the tech guys to check and find the problem It would help if I could point the problem so they would know where to look at Thanks in advance OS - Windows -bit No pre-installed OS I purchased the OS I bought this computer months ago December I have re-formatted this just this morning Intel i NVIDIA GTX Ti MB GDDR MSI Z MA-G B GB RAM Kingston Hyper X Genesis x GB Power Supply - AC BEL CE Max Power

A:[SOLVED] BSOD - Clock Interrupt

Hello jrwinl and welcome to TSF!.

I am looking through your dump files and its coming back inconclusive. However there are a few things about your build that ring alarm bells for me. For one your psu, AC BEL is a very very low quality unit to be running with your computer.

The Nvidia GTX 550 TI requires a 650W or greater power supply. You are currently using a low quality 500W unit (That i doubt IS indeed 500W of stable power).

So I am leaning towards those issues being all of or at least part of your problem that should be addressed.

You should replace your PSU with a good quallity 650W or higher model, We suggest : SeaSonic,XFX or Corsair (not the CX-GS-M Series).

May i suggest you also read our stick about power supplys: Power Supply Information and Selection.

Another few things to try would be Testing your RAM one stick at a time for 7 passes on Memtest86+. I also noticed you are running Windows 7. You should install the Service Pack.


EDIT: after looking at all of your files i noticed that the cause of one of your BSOD was "audiodg.exe" after some reading about your BugCheck (BUGCHECK_STR: 0x124_GenuineIntel) I believe this could now be hardware related. But i would want someone with more experience than me to verify this before we go down that route.

Thanks,
Altie

http://www.techsupportforum.com/forums/f299/solved-bsod-clock-interrupt-640490.html
Relevancy 83.85%

Hello all I have a computer that just loves giving me trouble This is probably the th time something has gone wrong with it in the BSOD clock 0x0101 interrupt year and a half since I've got it It was a custom build and can't help but wonder if some of the hardware is not compatible Anyways the problem started with the computer just BSOD 0x0101 clock interrupt randomly restarting twice which then moved onto the secondary processor clock interrupt BSOD with x code I had this error a couple of months back and reinstalling windows fixed it temporarily It came back and I figured it to be the CPU bought a new one and no difference so sent it back and later found the hard drive to have bad blocks as the computer started running very slowly Replaced BSOD 0x0101 clock interrupt the hard drive and it has been fine until now Around this time I did other tests like memtests which passed It seems to blue screen at random both under stress and not I've run a few tests like the Intel processor diagnostic which has passed I've watched the CPU temperature and it doesn't go above Windows had unresolved issues that showed video hardware error I'm not sure how to find that again or if its related I'm really stumped as I fix one thing another seems to break and really hoping its drivers as I can t afford to keep replacing parts anymore Thanks very much in advance to anyone who can offer me any form of help I'm in my final year at University and really need a stable machine for it I'll do a driver verifier next OS - Windows x Windows XP or Windows - not sure Purchased OS Age of system - About a year and a half Age of OS installation - Roughly a month or two I've run a Whocrashed analysis on the dumps ----------------------------------- quot Crash dump directory C Windows minidump Crash dumps are enabled on your computer On Mon GMT your computer crashed crash dump file C Windows minidump - - dmp This was probably caused by the following module ntoskrnl exe nt x EFC Bugcheck code x x x xFFFFF x Error CLOCK WATCHDOG TIMEOUT file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System Bug check description This indicates that an expected clock interrupt on a secondary processor in a multi-processor system was not received within the allocated interval This appears to be a typical software driver bug and is not likely to be caused by a hardware problem This problem might be caused by a thermal issue The crash took place in the Windows kernel Possibly this problem is caused by another driver that cannot be identified at this time On Mon GMT your computer crashed crash dump file C Windows memory dmp This was probably caused by the following module hal dll hal HalReturnToFirmware xB D Bugcheck code x x x xFFFFF x Error CLOCK WATCHDOG TIMEOUT file path C Windows system hal dll product Microsoft Windows Operating System company Microsoft Corporation description Hardware Abstraction Layer DLL Bug check description This indicates that an expected clock interrupt on a secondary processor in a multi-processor system was not received within the allocated interval This appears to be a typical software driver bug and is not likely to be caused by a hardware problem This problem might be caused by a thermal issue The crash took place in a standard Microsoft module Your system configuration may be incorrect Possibly this problem is caused by another driver on your system that cannot be identified at this time On Mon GMT your computer crashed crash dump file C Windows minidump - - dmp This was probably caused by the following module ntoskrnl exe nt x EFC Bugcheck code x x x xFFFFF x Error CLOCK WATCHDOG TIMEOUT file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System Bug check description This indicates that an expected clock interrupt on a secondary processor in a multi-processor system was not r... Read more

A:BSOD 0x0101 clock interrupt

Also as a little side note as extra information, it does have an issue with restarting quite often. That when pressing restart, it tries but gets stuck at the windows screen and doesnt "beep" to get started on the booting process. So I have to switch off completely and then it will boot..

http://www.techsupportforum.com/forums/f299/bsod-0x0101-clock-interrupt-679193.html
Relevancy 82.99%

Hi Everyone
I've been getting this BSOD quite alot since i built my pc. It has been happening for as long as i can remember, and seems to happen randomly too. The last few times it has happened was while streaming videos on google chrome, and watching videos on a usb drive. Ive attached the dump file so you can have a look. Any help would be greatly appreciated!

Thanks
ROBBIES-PC-15_03_2015_170029_54.zip

A:BSOD happens randomly. A clock interrupt was not recieved

Please provide this report:





License Information (Windows 7 and earlier)

Please provide the MGADiag report according to these instructions (from this post: Product Key Number - Uninstall and Deactivate in Windows - Page 3 - Windows 7 Help Forums ):





To properly analyse and solve problems with Activation and Validation, we need to see a full copy of the report produced by the MGADiag tool (download and save to desktop - http://go.microsoft.com/fwlink/?linkid=52012 )
Once saved, run the tool.
Click on the Continue button, which will produce the report.
To copy the report to your response, click on the Copy button in the tool (ignore any error messages at this point), and then paste (using either r-click/Paste, or Ctrl+V ) into your response.







There are no memory dumps in the uploaded reports, please do this:





Upload Dump Files:
NOTE: If using a disk cleaning utility, please stop using it while we are troubleshooting your issues.
Please go to C:\Windows\Minidump and zip up the contents of the folder. Then upload/attach the .zip file with your next post.
Left click on the first minidump file.
Hold down the "Shift" key and left click on the last minidump file.
Right click on the blue highlighted area and select "Send to"
Select "Compressed (zipped) folder" and note where the folder is saved.
Upload that .zip file with your next post.

If you have issues with "Access Denied" errors, try copying the files to your desktop and zipping them up from there. If it still won't let you zip them up, post back for further advice.

If you don't have anything in that folder, please check in C:\Windows for a file named MEMORY.DMP. If you find it, zip it up and upload it to a free file hosting service. Then post the link to it in your topic so that we can download it.

Also, search your entire hard drive for files ending in .dmp, .mdmp, and .hdmp. Zip up any that you find and upload them with your next post.

Then, follow the directions here to set your system for Minidumps (much smaller than the MEMORY.DMP file): Set MiniDumpMore info on dump file options here: Overview of memory dump file options for Windows 2000, Windows XP, Windows Server 2003, Windows Vista, Windows Server 2008, Windows 7, and Windows Server 2008 R2



While waiting for a reply, please start with these free diagnostics: Hardware Diagnostics

http://www.eightforums.com/bsod-crashes-debugging/63070-bsod-happens-randomly-clock-interrupt-not-recieved.html
Relevancy 82.99%

Full BSOD A clock interrupt was not received by a secondary processor within the allocated time interval Hi I just built a computer for the first time and it seems to be working fine except for this single BSOD I keep BSOD was not Clock recieved A Stress Under - Interrupt getting At first I thought it happened just at random times until I BSOD Under Stress - A Clock Interrupt was not recieved started realizing a pattern First thing I realized was that it only happened when I was playing World of BSOD Under Stress - A Clock Interrupt was not recieved Warcraft for about an hour I checked my CPU temp while playing WoW and it seemed to go up from to about - That doesn't seem right to me But it seems that when it gets to around that - degrees celcius it gets this BSOD I confirmed this when I tried to play Assassin's Creed Revalations Apparently AC using more memory and heats up the CPU much quicker than WoW I get the BSOD the second the I load my save Also I tried to do the stress test mentioned in this post Hardware - Stress Test With Prime I was not monitoring my CPU temp when I did it but I got the same BSOD the second I started the quot Small FFTs quot test If anyone could help me I would be extremely thankful I guess I should mention this is my first time building a computer I ordered all the parts off the internet and put them together myself about two weeks ago System specs OS Windows Home Premium x bought retail and installed manually Processor QuadCore Intel Core i - MHz Motherboard Asus P P -M Pro Memory Corsair Vengeance x GB DDR Graphics NVIDIA GeForce GTX Ti MB Thanks for any help at all Ethan Attached system health report and dump files

A:BSOD Under Stress - A Clock Interrupt was not recieved

* You have Symantec which is a frequent cause of BSOD's.
I suggest you remove and replace it with Microsoft Security Essentials AT LEAST TO TEST

http://us.norton.com/support/kb/web_...080710133834EN

Microsoft Security Essentials - Free Antivirus for Windows

* Re STOP 0x101: CLOCK_WATCHDOG_TIMEOUT troubleshooting.
Please read carefully through this link.

STOP 0x101: CLOCK_WATCHDOG_TIMEOUT troubleshtg

* I see you also need to install SP1.
Run the update readiness tool and then update to SP-1

Ensure you install the correct 64 or 32 bit option for your system)

Download the System Update Readiness Tool (64bit)

Download the System Update Readiness Tool (32bit)

http://windows.microsoft.com/installwindows7sp1

* I note you have RTCore64.sys{Related to RTCore64.sys MSI Afterburner from Micro-Star Int'l Co. Ltd.}
Suggest you update or remove it.

http://www.sevenforums.com/bsod-help-support/204357-bsod-under-stress-clock-interrupt-not-recieved.html
Relevancy 82.13%

Please help. I realize the Clock Interrupt BSOD has been covered many times, but I am unable to see any reasonable fix for this. I hope it's a software tweak, a driver problem, or even an OS reinstall. This is a crappy little laptop that I need to use since our Win10 Dell got stolen last week here in rural Mexico til I get home (retired). This BSOD occurs 1-2 per day. Been trying to remember to simply restart Windows everyday... which seems to help.
This machine is a weak older Toshiba Satellite, 3GB RAM, 75GB HD
My dump (zip) file is included in attachments
Image of BSOD:

http://www.sevenforums.com/bsod-help-support/390913-bsod-clock-interrupt-error-stop-0x00000061.html
Relevancy 82.13%

Hello I ll start by saying how much I appreciate any help I m not overly technical and running into problems with my laptop I have a fairly stable Toshiba laptop that is a few years old Windows and I only use it for web surfing and Office so nothing graphic heavy Lately I ve noticed my laptop seems to be a Interrupt Solved: - Clock & BSOD Driver Display bit loud like it is constantly churning and really slow Over the weekend I got my first Blue Screen of Death saying Attempt to reset the display driver and recover from timeout failed I could get to Safe Mode but that was about it when I didn t get the blue screen it would freeze when trying to start Windows At Solved: BSOD - Display Driver & Clock Interrupt one point though I got a different blue screen A clock interrupt was not received on a secondary processor allocated time interval From research I ve done I think it has something to do with NDIVDIA GeForce GT M In Safe Mode it says all drivers are up to date I ve tried disabling this and it boots normally but once I move the mouse the screen freezes I m sort of in a bind Solved: BSOD - Display Driver & Clock Interrupt because all I can do is get to Safe Mode or try to load Windows normally but it freezes and I have to hold down my power button to turn it off Any Solved: BSOD - Display Driver & Clock Interrupt ideas on what I need to do for these two blue screens of death Timing couldn t be worse and I m fearful this isn t an easy fix Do I need to do a NVIDIA driver uninstall If so I m struggling to find the drivers to use also can you use a USB stick with the drivers in Safe Mode Any help would be awesome thanks nbsp

Relevancy 82.13%

Experiencing BSODs during explosions, otherwise in the above games. I installed a Xonar DX sound card and clearedout the other drivers(I think).

? OS - Vista/ Windows 7 ? ? x64-bit ? What was original installed OS on system? - Windows 7 ?Full retail ?Two years old, made from parts. ? Age of OS installation - have you re-installed the OS? - Three weeks. ? CPU ? Video Card - Nvidia GTX 275 ? MotherBoard - m4a78-em ? Power Supply - brand & wattage - Corsair 650W ? System Manufacturer - N/A, custom desktop

Edit: sorry for formatting. Here's the report: reportandperfmon.zip

A:0x101 Clock Interrupt BSOD during Battlefield 3, Saints Row 3

Please attach the zip file to your next post.

A 229k file named Setup (7).exe came down from that link.

Regards. . .

jcgriff2

`

http://www.techsupportforum.com/forums/f299/0x101-clock-interrupt-bsod-during-battlefield-3-saints-row-3-a-614355.html
Relevancy 82.13%

purchased transformers fall of cybertron about am yesterday morning it downloaded fine but when i try and run it the game system crashes into the bsod i have made clock A fall of cybertron, BSOD transformers interrupt sure all the following is upto date catalist and graphics updated to directX fully updated net mainfraim bios chipset audio it sucks i paid for this game and would be gutted if its useless have looked around all day and i just cant find a solution i only got the pc weeks ago and the only thing it happens with is this one game i even went as far as a clean reinstall of windows and this time it went as far as the loading screen and then rebooted itself with the same error my card was overlocked slightly before the reinstall of windows and again i have updated everything going to try uninstalling easytune as i think this auto clocks me see if BSOD transformers fall of cybertron, A clock interrupt that helps also maybe try and set my cores for the game to affinity other than that im stumped im running win sp last night before giving up i tried -uninstalling Radeon and used the onboard auas -reinstalling the Radeon gradually taking it up through versions and testing eventully getting back to -running the game from C Program Files x Steam steamapps common Transformers Fall of Cybertron Binaries tfoc exe -dissable desktop composition -run as administrator -firewall off -antivirus off -uninstalled and reinstalled the game times and used a registry cleaner each time just in case this is the only game it happens with have tried uninstalling reinstalling several times also compleatly uninstalling gfx card and then reinstalling up through versions testing each even did a clean install of windows as i figured somthing might be corrupted heres the games i run on my pc Crysis high Skyrim ultra armaII high Dayz high sniper ultra sniper elite v ultra dead rising ultra left dead ultra or high cnt remember MW ultra BF ultra Fails ------ Transfomers lol n a when i run tfoc the bluescreen says clock interrupt was not received from secondary processor hope you have some adivice and can help

A:BSOD transformers fall of cybertron, A clock interrupt

BUGCHECK_STR: 0x124_AuthenticAMD =
Stop 0x124 - what it means and what to try

http://www.sevenforums.com/bsod-help-support/249999-bsod-transformers-fall-cybertron-clock-interrupt.html
Relevancy 81.27%

Attachment 327242
I'm completely unable to play any games as of a couple days ago. They either crash or i get bsod within 2 minutes. I have Driver IRQL Not Less or Equal and
A clock interrupt was not received on a secondary processor within the allocated time interval.

For a while my temps have been a little higher than should be, but when i go in game now my temps are 75-85 c, and around 40-45 at times like now where i'm not doing anything.
How likely is it that these blue screens are related to my temps? Why would they be happening all of a sudden
Could my h100i have stopped working? How would i tell

Any help is seriously appreciated.
Attachment 327243

Attachment 327244

A:BSOD with every game- driver irql and clock interrupt. dm log+screens

I'll take a look at your files, but if you are talking about GPU temps, the 670 should never get that hot and will start throttling at 70. If you are talking about your CPU, the same applies. You should check your fans and radiator for dust build up and if not clean you can look in bios at where the pump is plugged in and see the RPMs. If I remember correctly, the pump should run 100%at all times, (around 4000 RMPs, I think) should be connected to a molex plug coming from the PSU. If you are overclocking, set everything back to defaults.

http://www.sevenforums.com/bsod-help-support/339449-bsod-every-game-driver-irql-clock-interrupt-dm-log-screens.html
Relevancy 81.27%

Hi all im rec Exception, BSOD Clock not check Machine errors, 9C interrupt new here Grab yourself a coffee tea this is a long one For the last weeks my computer which is circa years old is starting to crash BSOD errors, Machine check Exception, Clock interrupt not rec 9C quite abit I am due an upgrade and was going to sell off some bits but I am having trouble working out which peice of my hardware is causing problems thus not wanting to buy new kit when the old kit is not faulty The i is overclocked to ghz alkas nero cooler v core is v cpu temp on idle is - degrees running Arma it moves up to circa degrees Motherboard is an Asus P T WS revolution with the latest bios Graphics card is XFX GTX with latest drivers BSOD errors, Machine check Exception, Clock interrupt not rec 9C Then The problem started when the computer used to randomly freeze Mainly just as the welcome screen comes up Then apon reboot id notice my Graphics card drivers disappered and that I had to reisntall them I decided to do a format and after about installation attempts One attempt ended in my screen going RED tint colour to get a fresh installation I opened up the computer and gave everthing a real clean this seemed to cure the Red screen issue As well as a bios reflash Now Most of the time everying runs fine including games HD video rendering with Sony vegas pro etc Then suddenly I get a BSOD crash normally Machine check exception error sometomes the clock interrupt not recieved When I restart the computer and load back into windows I notice the sound is jittery as if there is a loose wire Loading up a game is also laggy as well as video playing rendering I also get this with all overclocking off and everything left stock Then as the computer is left on for a while on OR restarted the issue is gone Weird I have included which I hope is correct following the guide the dmp file of the latest crash as well as a picture along with my pc probe readings Thanks for taking the time to read this and I hope you can help Thanks DB These are the errors that I have recorded roblem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode BCP BCP FFFFFA B B BCP BCP OS Version Service Pack Product Files that help describe the problem C Windows Minidump - - dmp C Users AppData Local Temp WER- - sysdata xml Read our privacy statement online http go microsoft com fwlink linkid amp clcid x If the online privacy statement is not available please read our privacy statement offline C Windows system en-US erofflps txt Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode c BCP BCP FFFFF FBC BCP BCP OS Version Service Pack Product Files that help describe the problem C Windows Minidump - - dmp C Users AppData Local Temp WER- - sysdata xml Read our privacy statement online http go microsoft com fwlink linkid amp clcid x If the online privacy statement is not available please read our privacy statement offline C Windows system en-US erofflps txt

A:BSOD errors, Machine check Exception, Clock interrupt not rec 9C

Hello dirtbag.

upgrade the network driver: Realtek RTL8168D/8111D Family PCI-E Gigabit Ethernet NIC. It goes back to Thu Feb 26 14:34:13 2009. And most of the error entries are associated with it.

Download the network card driver from manufactuer's website Realtek
Then reinstall the driver:
Click the Start Button, type "devmgmt.msc" (without quotation marks) in the Start Menu Search box and press Enter.
Double click to expand "Network adaptors".
Right click your network card and click Uninstall.
Check "Delete driver software for this device" check box, click OK.
Restart the computer
If windows does not auto configure the appropriate drivers at startup, install the downloaded one manually.
Anyway, your dump says:

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9C, {0, fffff880009fbc70, 0, 0}

Probably caused by : ntkrnlmp.exe ( nt!KxMcheckAbort+6c )

Followup: MachineOwner
---------
It is a hardware error. You need to test your hardware components.

► Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight, per RAM module per slot.

► Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

► Stress test the CPU.
Hardware - Stress Test With Prime95

But, as long as the Service Pack 1 and other updates are installed, there is a chance of instability in software's side.

Code:
Windows 7 Kernel Version 7600 MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Let us know the results.

http://www.sevenforums.com/bsod-help-support/262936-bsod-errors-machine-check-exception-clock-interrupt-not-rec-9c.html
Relevancy 81.27%

Hi,
I've been having a problem recently while playing Team Fortress 2, where the game freezes, then after about 30 seconds it comes up with the BSOD and it says 'A clock interrupt was not received on a secondary processor in the allocated time'.

This problem started out about a week or two ago, it happened again the day before yesterday, 3 times yesterday and one time so far today. I now can't play TF2 for more than 5 minutes without this happening.

I would really appreciate it if someone could help me fix this problem, thanks!

EDIT: Sorry if I posted in the wrong thread; I don't have much experience with forums.

A:BSOD Playing Team Fortress 2, Clock Interrupt not Recieved

Hello baconjh, and welcome to Seven Forums.

Please read the instructions here: Blue Screen of Death (BSOD) Posting Instructions, and post back with the needed information. One of our BSOD experts should be by later when able to further help.

http://www.sevenforums.com/bsod-help-support/329249-bsod-playing-team-fortress-2-clock-interrupt-not-recieved.html
Relevancy 81.27%

"A clock interrupt was not received by a secondary processor"

I find it strange that after a clean install, I ended up with a BSOD. I only begun installing Trucrypt, Acronis True Image Home, and very little else. As it happened, I was making a usual file transfer (from a backup mounted as a drive), and coping a encrypted partition over. Then that happened.

I've had multiple BSOD's before, which is why I made the backup and started fresh again. But now would it be fair to say that the CPU is to blame? Or quite simply a lack of updates.

A:[SOLVED] Clean install, then BSOD: A clock interrupt.... 0x101

Hi -

"A clock interrupt was not received by a secondary processor" = bugcheck 0x101 - CPU hang.

Info on 0x101 = http://www.sevenforums.com/crash-loc...tml#post567135

Likely hardware failure, but you can try -

Driver Verifier - Driver Verifier - Windows 7 & Vista (BSOD-related)

Driver Verifier needs to run 24 hours minimum or until it BSODs your system, whichever is less. Then . . .

Provide full system info - Blue Screen of Death (BSOD) Posting Instructions - Windows 7 & Vista

Regards. . .

jcgriff2

`

http://www.techsupportforum.com/forums/f299/solved-clean-install-then-bsod-a-clock-interrupt-0x101-579895.html
Relevancy 81.27%

So a few days ago this problem started when playing just WoW My computer would randomly lock up for - seconds at a time during this period the Warcraft interrupt was not World playing recieved Clock of BSOD sound would loop and the entire computer would BSOD playing World of Warcraft Clock interrupt was not recieved lock up The problem got worse and worse to where BSOD playing World of Warcraft Clock interrupt was not recieved most of the time it happens now i have to do a hard reset of my system It is still isolated to WoW most of the time however i have started getting short lock ups when playing other games never lasting more than a couple seconds in those Not sure why this problem just started but here are a few facts Since it started i have updated my BIOS as well as my Graphics drivers ive checked for virus and also done a system restore attached is my JCGRIFF File and below is my DXDIAG Any help is appreciated ------------------ System Information ------------------ Time of this report Machine name AARONM -PC Operating System Windows Home Premium -bit Build Service Pack win sp gdr - Language English Regional Setting English System Manufacturer Alienware System Model M xR BIOS InsydeH O Version A Processor Intel R Core TM i - QM CPU GHz CPUs GHz Memory MB RAM Available OS Memory MB RAM Page File MB used MB available Windows Dir C Windows DirectX Version DirectX DX Setup Parameters None User DPI Setting Using System DPI System DPI Setting DPI percent DWM DPI Scaling Disabled DxDiag Version bit Unicode ------------ DxDiag Notes ------------ Display Tab No problems found Sound Tab No problems found Sound Tab No problems found Sound Tab No problems found Input Tab No problems found -------------------- DirectX Debug Levels -------------------- Direct D retail DirectDraw retail DirectInput retail DirectMusic retail DirectPlay retail DirectSound retail DirectShow retail --------------- Display Devices --------------- Card name AMD Radeon HD M Series Manufacturer Advanced Micro Devices Inc Chip type ATI display adapter x DAC type Internal DAC MHz Device Key Enum PCI VEN amp DEV amp SUBSYS F amp REV Display Memory MB Dedicated Memory MB Shared Memory MB Current Mode x bit Hz Monitor Name Generic Non-PnP Monitor Monitor Model unknown Monitor Id Native Mode unknown Output Type Internal Driver Name aticfx dll aticfx dll aticfx dll aticfx aticfx aticfx atiumd dll atidxx dll atidxx dll atiumdag atidxx atidxx atiumdva atiumd a cap atitmm dll Driver File Version English Driver Version DDI Version Driver Model WDDM Driver Attributes Final Retail Driver Date Size bytes WHQL Logo'd Yes WHQL Date Stamp Device Identifier D B EE - - CF-C - BEC C Vendor ID x Device ID x SubSys ID x F Revision ID x Driver Strong Name oem inf ATI Mfg NTamd ati mtag Vancouver ci ven amp dev Rank Of Driver E Video Accel ModeMPEG A ModeMPEG C Deinterlace Caps E FF-B - B-BCF -BCB E F Format In Out YUY YUY Frames Prev Fwd Back Caps VideoProcess YUV RGB VideoProcess StretchX VideoProcess StretchY DeinterlaceTech PixelAdaptive AA E- - A - C - F FAF E E Format In Out YUY YUY Frames Prev Fwd Back Caps VideoProcess YUV RGB VideoProcess StretchX VideoProcess StretchY DeinterlaceTech BOBVerticalStretch A A C -C EC- BD - EDE-F C DC B Format In Out YUY YUY Frames Prev Fwd Back Caps VideoProcess YUV RGB VideoProcess StretchX VideoProcess StretchY E FF-B - B-BCF -BCB E F Format In Out UYVY UYVY Frames Prev Fwd Back Caps VideoProcess YUV RGB VideoProcess StretchX VideoProcess StretchY DeinterlaceTech PixelAdaptive AA E- - A - C - F FAF E E Format In Out UYVY UYVY Frames Prev Fwd Back Caps VideoProcess YUV RGB VideoProcess StretchX VideoProcess StretchY DeinterlaceTech BOBVerticalStretch A A C -C EC- BD - EDE-F C DC B Format In Out UYVY UYVY Frames Prev Fwd Back Caps VideoProcess YUV RGB VideoProcess StretchX VideoProcess StretchY A A C -C EC- BD - EDE-F C DC B Format In Out YV x Frames Prev Fwd Back Caps C C - FB - F - - BF EE D Format In Out NV x e Frames Prev Fwd Back Caps Vi... Read more

A:BSOD playing World of Warcraft Clock interrupt was not recieved

Only one crash in your report (STOP 0x116)

STOP 0x116: VIDEO_TDR_ERROR troubleshooting


Code:
atikmdag.sys Thu Jun 09 22:41:15 2011 (4DF1844B)
Update your video card - ATI Catalyst

When you install it, only install the driver, don't install the control center


Start off with updating the driver and following the recommendations in the link above

BSOD BUGCHECK SUMMARY

Code:

Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Sun Feb 19 22:25:02.510 2012 (UTC - 5:00)
System Uptime: 0 days 0:04:12.415
*** WARNING: Unable to verify timestamp for atikmpag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmpag.sys
Probably caused by : atikmpag.sys ( atikmpag+744c )
BUGCHECK_STR: 0x116
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0x116_IMAGE_atikmpag.sys
BiosReleaseDate = 11/29/2011
SystemManufacturer = Alienware
SystemProductName = M18xR1
CPUID: "Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz"
MaxSpeed: 2200
CurrentSpeed: 2192
??????????????????????????????????????????????????????????????????????????????????????``

http://www.sevenforums.com/bsod-help-support/215591-bsod-playing-world-warcraft-clock-interrupt-not-recieved.html
Relevancy 79.55%

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 2057

Additional information about the problem:
BCCode: 101
BCP1: 0000000000000031
BCP2: 0000000000000000
BCP3: FFFFF880009EB180
BCP4: 0000000000000001
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\091211-32557-01.dmp
C:\Users\Neil\AppData\Local\Temp\WER-54303-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt


This is a custom build that was done for me, the OS is Windows 7 Pro 64bit which I installed. No overclocking done as far as I'm aware

Any ideas guys from the information I have supplied, if anymore required just ask and I'll try my best to answer.

Cheers
Neil

A:BSOD 101 ERROR Processor interrupt

  
Quote: Originally Posted by Bully87


Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 2057

Additional information about the problem:
BCCode: 101
BCP1: 0000000000000031
BCP2: 0000000000000000
BCP3: FFFFF880009EB180
BCP4: 0000000000000001
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\091211-32557-01.dmp
C:\Users\Neil\AppData\Local\Temp\WER-54303-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
This is a custom build that was done for me, the OS is Windows 7 Pro 64bit which I installed. No overclocking done as far as I'm aware

Any ideas guys from the information I have supplied, if anymore required just ask and I'll try my best to answer.

Cheers
Neil



HI Neil and welcome
Best advice that I've seen about this error (from here: http://www.sevenforums.com/crashes-d...tml#post356791 )





Quote:
What you're looking for will be in one of the following categories:

a) BIOS bug
b) a driver whose activity is causing the target processor to lock up
c) a hardware defect (temperature, voltage, dust, RFI, outright borkedness...)


So, check the drivers
Then check the inside of the case (temperature, voltage, dust, etc).
Then run some hardware stress tests






Quote:
Try this free video stress test: FurMark: VGA Stress Test, Graphics Card and GPU Stability Test, Burn-in Test, OpenGL Benchmark and GPU Temperature | oZone3D.Net
Try this free stress test: Free Software - GIMPS





Quote:
Prime95 Setup:
- extract the contents of the zip file to a location of your choice
- double click on the executable file
- select "Just stress testing"
- select the "Blend" test. If you've already run MemTest overnight you may want to run the "Small FFTs" test instead.
- "Number of torture test threads to run" should equal the number of CPU's times 2 (if you're using hyperthreading).
The easiest way to figure this out is to go to Task Manager...Performance tab - and see the number of boxes under CPU Usage History
Then run the test for 6 to 24 hours - or until you get errors (whichever comes first).
The Test selection box and the stress.txt file describes what components that the program stresses.





Then try replacing parts.
Then look up the versions of your BIOS to see what changes were done.[/QUOTE]

http://www.sevenforums.com/bsod-help-support/186327-bsod-101-error-processor-interrupt.html
Relevancy 73.53%

Guys I been facing some issues with my relatively new CPU I have an Intel i cpu combined with GB DDR memory Mobo is DH BL - revision No GPU installed Power supply is via Corsair VX Problem i been facing BSOD saying BSOD(Page page interrupt hangs area/Clock not + recd) Non Facing fault that A clock interrupt wasnt recd Screenshot - http i tinypic com lbhc jpg BSOD Facing BSOD(Page fault Non page area/Clock interrupt not recd) + hangs saying Page fault in non paging area Couldnt grab a screenshot for this Display randomly goes off for a split second and reappears but the color of the panes go blue i havent chosen blue My setting is Facing BSOD(Page fault Non page area/Clock interrupt not recd) + hangs for clear pane Screenshot - http i tinypic Facing BSOD(Page fault Non page area/Clock interrupt not recd) + hangs com o vfs png This error solves itself after random number of hours mins Display vanishes for a split second and reappears and a small balloon at the bottom right corner prompts that the display driver had stopped working System plain hangs stops responding Randomly happens but more so while on youtube or after hrs of it idling i come back to the comp and try to scroll the content onscreen Sometime it revives from the stuck state as if nothing happened sometimes i have to give it a cold boot While reading forums with blue bands the blue bands kinda form blurry bars which stretch till the end of the screen I tried to grab a screenshot but the screenshots were clean The bands moved as i dragged the image about Also my comp's display went off one day and within a second came back with a blue-ish hue It restored itself but again has gone back to blue-ish I never have overclocked my processor What can be the reason for this Pls help me out here Other relevant information Windows x No other OS resides installed on system Full Retail Version OS was installed in July The cpu mobo were purchased in July I had Dynet RAM x GB each now using Corsair x GB Purchased in Aug i think The issue of hanging etc was faced with the Dynet RAM as well RAM info http i tinypic com hrolw png http i tinypic com neuxzk png

A:Facing BSOD(Page fault Non page area/Clock interrupt not recd) + hangs

33 of 44 crashes were related (as you surmised ) to a Bugcheck of 101. The rest were various hardware complaints. Please read below for what to try.

STOP 0x101: CLOCK_WATCHDOG_TIMEOUT troubleshtg
You should also update to SP-1 when you resolve this issue.

http://www.sevenforums.com/bsod-help-support/223527-facing-bsod-page-fault-non-page-area-clock-interrupt-not-recd-hangs.html
Relevancy 73.53%

Is Windows 7 . . . - x64 - no built system and bought win 7 oem from amazon.com - oem i believe doesn't mention manufacturer - less then 3 months old - less then 3 months old

A:BSOD Secondary Processor

Hello Shaan and welcome to Sevenforums.

BSOD Analyse

Drivers

When the CLOCK_WATCHDOG_TIMEOUT happens, it's usually caused by a driver hogging the processor. Here's a canned speech that I'd suggest you to follow. The canned speech is not provided by me, and I won't take any credit for it. It's by carrona.org, our friend here at 7F.






Quote:
Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

So, I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "IRP Logging", "Force Pending I/O Requests" and "Low Resource Simulation" and click "Next" ("Special Pool" may be able to be used depending on amount of RAM and errors being seen. In situations with small amounts of RAM, DO NOT select it),
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

Reboot into Windows (after the crash) and locate the memory dump file. If present, turn off Driver Verifier by going back in and selecting "Delete existing settings" on the first page. Then, zip up the memory dump file(s) and upload them with your next post. If no dump files were generated, post back for further suggestions.

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.

If that doesn't work, post back and we'll have to see about fixing the registry entry off-line:

Code:
Delete these registry keys to stop Driver Verifier from loading (works in XP, Vista, Win7):
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\VerifyDrivers
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\VerifyDriverLevel



Thank you,
Frederik.

http://www.sevenforums.com/bsod-help-support/237675-bsod-secondary-processor.html
Relevancy 73.53%

Hey there I ve been having this issue for a while now and I m "clock 101 BSoD. - interrupt CPU issue timeout" starting to become more bewildered by the minute After buying the CPU issue - 101 "clock interrupt timeout" BSoD. PC back in April and receiving it via mail from Overclockers co uk I ve had numerous bluescreens most of which happened while gaming one happened on the desktop when using Photoshop CS mentioning a clock timeout The following is from the latest minidump Code Bugcheck Analysis CLOCK WATCHDOG TIMEOUT An expected clock interrupt was not received on a secondary processor in an MP system within the allocated interval This indicates that the specified processor is hung and not processing interrupts Arguments Arg Clock interrupt time out interval in nominal clock ticks Arg Arg fffff f The PRCB address of the hung processor Arg Debugging Details ------------------ BUGCHECK STR CLOCK WATCHDOG TIMEOUT PROC CUSTOMER CRASH COUNT DEFAULT BUCKET ID VERIFIER ENABLED VISTA MINIDUMP PROCESS NAME svchost exe CURRENT IRQL d STACK TEXT fffff ec fffff f c fffff f nt KeBugCheckEx fffff ec fffff d fffff nt FNODOBFM string' x e e fffff ec fffff c fffff fffff ec b fffff nt KeUpdateSystemTime x fffff ec fffff c fffff de fffff b hal HalpHpetClockInterrupt x d fffff ec fffff d fffffa fffffa d fffff a d fffffa d CPU issue - 101 "clock interrupt timeout" BSoD. nt KiInterruptDispatchNoLock x fffff ec c fffff d def fffff ecca fffffa nt KeFlushProcessWriteBuffers x fffff ec fffff d ea bb fffff be de fffff c d nt ExpQuerySystemInformation x af fffff ecbe fffff c ed fffff ecca ffffffff fffe fe fbd b nt NtQuerySystemInformation x d fffff ecc f a nt KiSystemServiceCopyEnd x f e x f a STACK COMMAND kb SYMBOL NAME ANALYSIS INCONCLUSIVE FOLLOWUP NAME MachineOwner MODULE NAME Unknown Module IMAGE NAME Unknown Image DEBUG FLR IMAGE TIMESTAMP FAILURE BUCKET ID X CLOCK WATCHDOG TIMEOUT PROC VRF ANALYSIS INCONCLUSIVE BUCKET ID X CLOCK WATCHDOG TIMEOUT PROC VRF ANALYSIS INCONCLUSIVE Followup MachineOwner quot Process name quot never stays the same and this happens with a fresh install of Windows too I m completely dumbfounded as to why this is happening I originally sent the system back when it initially started bluescreening however their tests were inconclusive and they told me nothing was wrong - they never witnessed any bluescreen when it was with them Prime was run for two days and they finished the test off by attempting to run several game benchmarks - everything checked out Once I got it back the BSoD s were less frequent but they still happen I m partially leaning towards a PSU output issue but I really do have no idea Help N B - System information is below HJT logs can be provided upon request OS Version Microsoft Windows Home Premium Service Pack bit Processor AMD Phenom tm II X T Processor AMD Family Model Stepping Processor Count RAM Mb Graphics Card NVIDIA GeForce GTX Mb Hard Drives C Total - MB Free - MB D Total - MB Free - MB Motherboard Gigabyte Technology Co Ltd GA- GM-UD H x x Antivirus Microsoft Security Essentials Disabled W OCZ PSU BIOS - gt CPU settings are all set to quot auto quot Memory timings have been set manually Cool amp Quiet is off any quot turbo quot functions are also off in favour of stability nbsp

A:CPU issue - 101 "clock interrupt timeout" BSoD.

Strange as it may sound, I've known this error to disappear after the OS was re-installed.
 

https://forums.techguy.org/threads/cpu-issue-101-clock-interrupt-timeout-bsod.1024428/
Relevancy 72.24%

So, started having problems a few days back.. my computer started to randomly restart.
unchecked "auto restart" and instead started to get BSOD's.
Got no idea how to solve this, need some help.

Need more info than whats in the rar below, just let me know..
might need some explainations how to grab the info aswell..

Thanks.

Attachment 335543

Edit: always gettin the BSOD while playing High end games, and during Prime95 test.
Nothin during Furmark or memtest.

A:BSOD, Secondary processor failure under pressure?

Hello, Emil758. Welcome to Seven Forums. I will attempt to help you with this. I have looked at your 2 dump files and the last one gave no information other than an 0X124, or a generic hardware error. That error means nothing other than there was a hardware error somewhere, but gives no indication of what. The first dump file lists the following:


Code:
FAULTING_IP:
nvlddmkm+91951c
fffff880`0f94b51c 48ff255dc9ecff jmp qword ptr [nvlddmkm+0x7e5e80 (fffff880`0f817e80)]
DEFAULT_BUCKET_ID: GRAPHICS_DRIVER_TDR_FAULT
CUSTOMER_CRASH_COUNT: 1
BUGCHECK_STR: 0x116
PROCESS_NAME: System
CURRENT_IRQL: 0
Your Graphics drivers crashed and did not recover in the time allotted by Windows, so Windows assumed a Graphics failure.


Code:
nvlddmkm
start end module name
fffff880`0f032000 fffff880`0fd06000 nvlddmkm T (no symbols)
Loaded symbol image file: nvlddmkm.sys
Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
Image name: nvlddmkm.sys
Timestamp: Sat Sep 13 14:59:50 2014 (5414A236)
CheckSum: 00C8E3A6
ImageSize: 00CD4000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04
To begin with I would like you to reinstall you graphics driver using the following method. It will give you the cleanest install we can have.
NVIDIA Drivers - Avoid Problems

Try that and see if it improves your problem and let me know.. If you have another BSOD please submit the Blue Screen of Death (BSOD) Posting Instructions again. Please use option #2 and press the 'Grab All' Button and give it some time to gather all of the information, then upload the Zip file in a new post here.

Also, please make sure the Firmware on your SSD is up to date and your computer is configured for Small Memory Dumps, which it appears to be. Dump Files - Configure Windows to Create on BSOD

http://www.sevenforums.com/bsod-help-support/347694-bsod-secondary-processor-failure-under-pressure.html
Relevancy 71.38%

ok as title say
i have 3 kinds of BSOD that frequent to happen and randomly..
sometime when i play game it is suddenly BSOD
when i only watch Film it does happened too..
sometime it does happen during booting...
its happening very randomly..
please help me
its happening since 2 years ago up until now i tried to reinstall but seems like no working
but before reinstall the BSOD sure happen when i open browser in early start after booting..

A:irl_less_or_equal,an uncorrectable hrdware,secondary processor BSOD

Here's my dump file

http://www.sevenforums.com/bsod-help-support/350056-irl_less_or_equal-uncorrectable-hrdware-secondary-processor-bsod.html
Relevancy 70.52%

Hi there

I bought this system
::YoYo Tech::

At the beginning of the year and got regular blue screens after a couple of weeks. It's had several trips back to YoyoTech who claim there is nothing wrong with it. After a period where I got one BSOD per week, it's creeping back up to one a day. I'd really like to find a solution.

The message I get is "A clock interrupt was not received on a secondary processor within the allocated time interval".

I attach the most recent minidump file. All help most gratefully received.

Cheers

Tom

A:Clock interrupt

Hi -

Bugcheck 0x101 = CPU hang

Usually caused by hardware failure; however, I have seen some where software is at fault.

Remove Elby and any other virtual devices for now.

The probable cause is listed as Unknown_Image, which often means that RAM or other hardware failure is affecting RAM's ability to properly hold kernel code.

Run memtest86+ one stick at a time; alternate the slots - http://www.sysnative.com/forums/showthread.php/3909-Test-RAM-With-Memtest86?p=28391&viewfull=1#post28391

Driver Verifier may help here if a driver is at fault - http://www.techsupportforum.com/foru...ed-473665.html

VM is another likely suspect.

Regards. . .

jgriff2

`


BSOD SUMMARY


Code:

Debug session time: Fri Nov 2 11:17:35.771 2012 (GMT-4)
Loading Dump File [C:\Users\PalmDesert\SysnativeBSODApps\110212-20170-01.dmp]
Built by: 7601.17944.amd64fre.win7sp1_gdr.120830-0333
System Uptime: 4 days 5:51:52.846
BugCheck 101, {19, 0, fffff88003189180, 7}
Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )
Bugcheck code 00000101
Arguments:
Arg1: 0000000000000019, Clock interrupt time out interval in nominal clock ticks.
Arg2: 0000000000000000, 0.
Arg3: fffff88003189180, The PRCB address of the hung processor.
Arg4: 0000000000000007, 0.
BUGCHECK_STR: CLOCK_WATCHDOG_TIMEOUT_8_PROC
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_CLOCK_WATCHDOG_TIMEOUT_8_PROC_ANALYSIS_INCONCLUSIVE
MaxSpeed: 3400
CurrentSpeed: 3400
BiosVersion = 1850
BiosReleaseDate = 06/27/2011
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
??????????????????????????????????????????????????????????????????????????????????????``

http://www.techsupportforum.com/forums/f299/clock-interrupt-673770.html
Relevancy 70.52%

I keep getting this blue screen of death whenever i play portal 2: a clock interrupt was not received on the secondary processor within the allocated time interval.

my system specs are:

990XA-UD3 Gigabyte mobo
AMD 3.60Ghz 8 core processor
NVIDIA Geforce GTX 550 Ti
16 Gb RAM

please answer asap

A:Clock interrupt

Are you overclocking? Could be heat related. Try taking CPU temp.

http://www.techsupportforum.com/forums/f217/clock-interrupt-649502.html
Relevancy 70.52%

For the past few months, I've been receiving the BSOD, clock interrupt not received on a 2ndary processor within the allocated time. These games (Minecraft, Team Fortress 2, and Europa Universalis 4) my computer should be able to handle, which it does, then crashes after a little bit after starting it.

16 GB of RAM, and 3.6 GHz of processing power with NVIDIA GeForce GTX 650 graphic card on an XPS 8300 with windows 7

I've tried upgrading my power supply, thinking it wasn't getting enough power, but that didn't work (600W now instead of original 460W that it came with)

A:Getting BSOD, clock interupt not recieved on 2nd processor

Hi Rico5924.

Stress test the CPU.
Hardware - Stress Test With Prime95

Let us know the result.

http://www.sevenforums.com/bsod-help-support/329034-getting-bsod-clock-interupt-not-recieved-2nd-processor.html
Relevancy 69.23%

Lately I have been having these BSOD "A clock interrupt was not received on a secondary processor within the allocated time interval."

This is when using the PC in a normal way (like browsing, checking email), nothing intensive
After the restart, everything works fine, and I receive no more BSOD, untill I start up my pc the next day.

the crash happens withing 5-10minutes after I start to use it.

I have already done the diagnostics tool, and added the result.

my specs are:
WIN7 home premium 64bit
intel core i7-3820 @ 3.60 GHZ (x8)
MSI MS7760
16GB ram
firefox 24.0 (I always have this running, but it noticably crashes when I'm using it actively)
I would appreciate some help in this matter.
On a side note, I'm interested in what a clock interrupt is, and does.

A:BSOD Normal PC usage, error "clock interval not received"

Welcome to SF .

Unfortunately the uploaded file doesn't contain recent dumps.
The other thing we need is the kernel dump because you are describing bugcheck 0x101 which
can not be analyzed using a minidump.

Please follow this tutorial to confirm you have Windows set to create a Kernel Dump (#7)
then look in the system root folder for a file called MEMORY.dmp and upload it using
an online hosting service the likes of dropbox or skydrive.
Dump Files - Configure Windows to Create on BSOD

The file should be located in this folder:

Code:
C:\Windows\MEMORY.dmp

http://www.sevenforums.com/bsod-help-support/308543-bsod-normal-pc-usage-error-clock-interval-not-received.html
Relevancy 69.23%

- Clock Inturrupt Not Recieved on Secondary Processor within Allocated Time Interval BSoD

Problem occurs because the 2 CPU's timestamps are not synched and causes an issue or BSoD.

This happens to me so far only in Age of Conan.

A fix for this problem was installing the AMD Dual Core Optimizer, I have had this installed when I had XP and installed it on Vista as well. From what I've seen, it is not required in Vista, because apparently Vista fixes the timestamp issue. Again I've had no problems with this other than in AoC.

- AoC SLi Freeze/lockup

Running AoC in fullscreen in SLi freezes up after awhile, time amount varies. When running out of SLi and in windowed mode, the game runs fine.

Trying to get SLi working with AoC since it's the game I primarily play right now.

updated all drivers yesterday, X-Fi to the latest 2.18.0004, nvidia to 177.19, and nforce board drivers.

Any suggestions?

Relevancy 69.23%

I'm running Vista Home Premium on Toshiba Satellite notebook (approx 2 1/2 yrs old). I've been researching various solutions without success. The typical message is "clock interrupt not received on secondary processor...with the STOP numbers shown in my post title. Suggestion is to "disable caching or shadowing." Less frequent errors are "win wireless LAN 802.11 Extensibility Framework stopped working & was closed' and "hpqddsvc service hang." I've updated drivers, checked disc, ran anti-virus software with no improvement. Crashes seem to happen after PC in use for 30min or more and I hear a muted whirring noise just before the crash.

Any suggestions? I'd appreciate any help as I'm stumped!
 

Relevancy 69.23%

Fun times Just replaced my -core with an FX not interrupt CPU A by recieved second clock [SOLVED] -core There's no reason there should be a compatibility issue Here's the deal every time I launch CS-GO I get this BSOD I can use other graphic intensive applications with no problem but CS-GO causes this BSOD on cue every time about seconds after loading It makes no sense to me so I'm wondering if there's a patch or something [SOLVED] A clock interrupt not recieved by second CPU for my processor sounds crazy but AMD dual cores used to have a patch for multiple core processors Never know Memtested fine no issues Specs are as follows OS - Vista Windows Ultimate x -bit or x x What was original installed OS on system x Is the OS an OEM version came pre-installed on system or full retail version YOU purchased it from retailer full retail Age of system hardware months Age of OS installation - have you re-installed the OS days yes three times CPU - AMD FX- -core Video Card Visiontek Radeon w eyefinity enabled MotherBoard - Gigabyte GA- A-D AM Power Supply - brand amp wattage - AZZA Dynamo watt PSU System Manufacturer - self Exact model number if laptop check label on bottom n a

A:[SOLVED] A clock interrupt not recieved by second CPU

Looks like you have not updated the Bios on the motherboard?

Yours is F7 from Oct 13, 2011 there are 2 updates since to update CPU codes> http://www.gigabyte.us/products/prod...?pid=3908#bios

BSOD BUGCHECK SUMMARY


Code:

Debug session time: Tue Sep 18 11:56:09.266 2012 (UTC - 4:00)
Loading Dump File [C:\Users\Owner\Bsodapps\091812-19952-01.dmp]
System Uptime: 3 days 18:51:12.585
BugCheck 101, {19, 0, fffff88002fd7180, 3}
Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )
Bugcheck code 00000101
Arguments 00000000`00000019 00000000`00000000 fffff880`02fd7180 00000000`00000003
BUGCHECK_STR: CLOCK_WATCHDOG_TIMEOUT_8_PROC
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_CLOCK_WATCHDOG_TIMEOUT_8_PROC_ANALYSIS_INCONCLUSIVE
BiosVersion = F7
BiosReleaseDate = 10/13/2011
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = GA-970A-D3
??????????????????????????????????????????????????????????????????????????????????????``

http://www.techsupportforum.com/forums/f299/solved-a-clock-interrupt-not-recieved-by-second-cpu-666462.html
Relevancy 69.23%

Hey guys;
I have seen older posts with this same problem way back to 07.
I built my system with AMD 9850BE and an ASUS M4N78 Pro MOBO Win7/ 64 with 2GB DDR2 dual channel RAM by Corsair (XMS2).
All has been just fine until 8/28. Suddenly I get this message constantly. I have tried reseating MEM.
reloading BIOS. this system will hang in WIN repair and all diagnostics!
I have a 600Watt PS. ANd more fans than God...

My system is now so unstable that I can't even get to this forum so I resurected my old HP.

I have not seen any fixes in old threads on this issue. Can someone please help?

Thanks
 

https://forums.techguy.org/threads/did-not-receive-clock-interrupt-amd-9850.949414/