Windows Support Forum

BSOD while trying to install Windows 7 64-bit

Q: BSOD while trying to install Windows 7 64-bit

Hello I am having some difficulties while trying to download Windows -bit Home Edition Currently I have Windows -bit Home Edition on while trying install 7 BSOD 64-bit Windows to my machine I loaded the Windows -bit CD into the DVD ROM and select the option to boot from CD Well initially I get the quot Windows is Loading Files quot screen and then after it loads the files it BSOD while trying to install Windows 7 64-bit goes to the quot Starting Windows quot screen for maybe seconds freezes and that's when I get the BSOD Error Message - A problem has been detected and Windows has been shut down to prevent damage to your computer If this is the first time you've seen this Stop error screen restart your computer If this screen appears again follow these steps Check to be sure you have adequate disk space If a driver is identified in the Stop message disable the driver or check with the manufacturer for driver updates Try changing video adapters Check with your hardware vendor for any BIOS updates Disable BIOS memory options such as caching or shadowing If you need to use safe mode to remove or disable components restart your computer press F to select Advanced Startup Options and then select Safe Mode Technical Information Stop x E xFFFFFFFFC XFFFFF F BE XFFFFF D XFFFFF F This is the error message I keep receiving I have read a few things online to try out and none of them worked Here is everything that I have done so far - I read online to try and remove third party drivers I uninstalled and literally removed from my computer my graphics card EVGA GeForce GTX I also uninstalled my drivers for my Razor keyboard I have removed almost every application off of my computer I'm not worried about backing up files - nothing important was on it and I was planning on reinstalling everything anyways So if there is just a way to scrub my whole hard drive let me know I updated my BIOS I ran a Windows Memory Test and I received no errors I read online that RAM could be causing this issue not sure if its true or not but I removed one of my sticks of ram Had GB in it removed a stick now I have GB I've spent quite a bit of time trying to figure this out and researching things online but no luck Hopefully someone out there has some good tips advice for me Is so please share Thanks Kyle

Relevancy 100%
Preferred Solution: BSOD while trying to install Windows 7 64-bit

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: BSOD while trying to install Windows 7 64-bit

Win7 32 bits is runnig fine? If so, it's very unlinlike you have disk or memory errors. It's not a driver problem... it isn't installing yet!

Are you really booting from DVD???

http://www.sevenforums.com/bsod-help-support/306448-bsod-while-trying-install-windows-7-64-bit.html
Relevancy 46.44%

Hello restarts or install. wont windows complete install 7 bsod everyone first off thanks for taking the time to consider my problem i know this is quite a redundant issue thank you for your patience First off this windows 7 wont complete install. restarts install or bsod is a newly built computer all windows 7 wont complete install. restarts install or bsod fresh components after cleaning activating the windows 7 wont complete install. restarts install or bsod hdd via shift f at win setup which took me a day to figure out i was very excited to see my hdd available for win installation as i proceed windows does its thing after installing its time for the first restart it restarts right back to the initial windows setup ive done a lot of research and majority of the problems seem to be the boot priority in bios so i made sure that it was usb-hdd then hard drive win on flash drive for me no dvd burner available still the same thing right back to initial setup i tried maybe to remove the flash drive during the second countdown to restart but when it restarts the windows splash screen comes up and then blue screens and restarts real quick cant see what the error is on bsod there have been a couple different start up issues quot windows did not start properly quot quot select version of windows to start from quot or something to that effect but its all the same outcome windows just wont finish installation i know this flash drive works cuz i used it to upgrade on my gf's laptop any suggestions would be greatly appreciated thanks

A:windows 7 wont complete install. restarts install or bsod

Did you wipe the HD with Diskpart Clean Command?

Check for newer BIOS version. If none, Reset BIOS to defaults, set SATA controller to AHCI.

Set HD first to boot in BIOS setup, trigger stick to boot using one-time BIOS boot menu key at boot.

Where did you get Win7? How is it written to stick?

http://www.sevenforums.com/installation-setup/251623-windows-7-wont-complete-install-restarts-install-bsod.html
Relevancy 46.01%

Hi I have just trying install driver when / BSOD / windows to install update s/w run built a Windows machine and am having lots of problems I can't run windows update which outputs error messages BSOD when trying to run windows update / install driver / install s/w - have followed all the fixes for this to no success I get BSOD constantly whenever I try to do anything The system is all new apart from the GPX card full spec below AMD Bulldozer FX- Quad Core Asus M A x motherboard GB x Kingston HyperX Genesis Grey DDR Sapphire Radeon HD GB PCIe moved over from old PC x OCZ Vertex II Bigfoot GB SSD OS and program drive x Seagate Barracuda TB HDD file storage only Rane TTM SL USB soundcard W BeQuiet PSU The system is a fresh build yesterday with NOTHING installed on any of the drives apart from Motherboard drivers Windows OS - x Ultimate SP Windows updates up to a point - of them can't install Serato Scratch Live software and drivers for the TTM SL AVG Antivirus Free BSOD when trying to run windows update / install driver / install s/w I have attached a zip of dump file and report Any help would be massively appreciated

A:BSOD when trying to run windows update / install driver / install s/w

Two problems

One, your AVG.
I notice your AVG which is often at least a contributing cause of BSOD'S . Please remove and replace your AVG with Microsoft Security Essentials AT LEAST TO TEST

Download tools and utilities | AVG Worldwide

Microsoft Security Essentials - Free Antivirus for Windows
Second BCC 101

Best advice that I've seen about this error (from here: http://www.sevenforums.com/crashes-d...tml#post356791 )





Quote:
What you're looking for will be in one of the following categories:

a) BIOS bug
b) a driver whose activity is causing the target processor to lock up
c) a hardware defect (temperature, voltage, dust, RFI, outright borkedness...)


Check the drivers
Check the inside of the case (temperature, voltage, dust, etc).
Run Furmark, and Prime95 below.





Quote:
Try this free video stress test: FurMark: VGA Stress Test, Graphics Card and GPU Stability Test, Burn-in Test, OpenGL Benchmark and GPU Temperature | oZone3D.Net
Try this free stress test: Free Software - GIMPS







Quote:
Prime95 Setup:
- extract the contents of the zip file to a location of your choice
- double click on the executable file
- select "Just stress testing"
- select the "Blend" test. If you've already run MemTest overnight you may want to run the "Small FFTs" test instead.
- "Number of torture test threads to run" should equal the number of CPU's times 2 (if you're using hyperthreading).
The easiest way to figure this out is to go to Task Manager...Performance tab - and see the number of boxes under CPU Usage History
Then run the test for 6 to 24 hours - or until you get errors (whichever comes first).
The Test selection box and the stress.txt file describes what components that the program stresses.

http://www.sevenforums.com/bsod-help-support/202947-bsod-when-trying-run-windows-update-install-driver-install-s-w.html
Relevancy 45.15%

Hi I use a year old aces aspire z and I think it just died on me Here is what happens Whatever I do it cannot stay without a BSOD for more than minutes I tried reinstalling drivers and it did not change anything so I tried several things but finally just formated it and installed windows again I actually got a BSOD while installing windows from an original CD so im pretty sure my problem is hardware related I did a check of the ram with Memtest for approx minutes one full cycle and found nothing I did a quick test of the HD with an other program and it did not find anything either so im starting to think its the graphics card that is dying The minidumps there quite a lot of them but I think they will always give the same Clean - Still BSOD install lots of windows - BSOD Format, same info and health report are attached to the thread Here are some specs Core Duo T Mobile Intel GM Express x MB Thanks in advance for helping me confirm the source of lots of BSOD - Format, Clean windows install - Still same BSOD this problem

A:lots of BSOD - Format, Clean windows install - Still same BSOD

Any help would be greatly appreciated, I really dont know what to do!

http://www.sevenforums.com/bsod-help-support/206684-lots-bsod-format-clean-windows-install-still-same-bsod.html
Relevancy 42.14%

I built up a new PC before Christmas. These were the components:

Asus P8Z77-V Motherboard
Intel i5 3570K 3.4GHz
2 x G-Skill 8GB DDR3 1600Mhz
PowerColor HD 6870 1GB GDDR5 Dual DVI HDMI PCI-E Graphics Card
OCZ 120GB Agility 3 SSD

Not really used it that much and have had random crashes since built. Today, I decided to start afresh and reformatted the C drive and re-installed Windows. Although the OS installed without a hitch, at various times throughout the Windows Update process, the machine would crash a BSOD would appear.

I have attached the files as requested.

Can anyone advise me on what is the best approach to resolving this issue?

Cheers

Darren

A:Windows 7 - Fresh Install BSOD whilst applying windows updates

Hello DarrenF.

Four crashes, four different stopcodes.

Code:
BugCheck 34, {50853, fffff8800317e738, fffff8800317df90, fffff80002cd1eee}

Probably caused by : ntkrnlmp.exe ( nt!ExAcquireResourceSharedLite+4e )

Followup: MachineOwner
---------
BugCheck 1E, {ffffffffc0000005, fffff80002c8e284, 0, ffffffffffffffff}

Probably caused by : ntkrnlmp.exe ( nt!SwapContext_PatchXRstor+0 )

Followup: MachineOwner
---------
BugCheck 1A, {31, fffffa800ef4fac0, fffff8800e0ed000, fffff8a00a7584e0}

Probably caused by : ntkrnlmp.exe ( nt! ?? ::NNGAKEGL::`string'+7271 )

Followup: MachineOwner
---------
BugCheck 3B, {c0000005, fffff960000f6b32, fffff8800785ffa0, 0}

Probably caused by : win32k.sys ( win32k!FreeObject+12 )

Followup: MachineOwner
---------
Whereas ntkrnlmp.exe and win32k.sys, none of them cannot be the real probable cause of a crash. Do these tests, one by one.

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

Stress test the CPU.
Hardware - Stress Test With Prime95

Enable Driver Verifier to monitor the drivers.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

Let us know the results, with the subsequent crash dumps, if any.

http://www.sevenforums.com/bsod-help-support/273552-windows-7-fresh-install-bsod-whilst-applying-windows-updates.html
Relevancy 42.14%

Ok so a few days ago I was on my computer and it started running a little slow so I decided to restart This is when all the trouble began Following the reboot at the welcome screen i was greeted by several registry errors and a message saying a backup copy of wont xp to it tried but Windows install BSOD. windows, correctly!? had reinstall my registry had to be loaded So I thought ok why did this happen So I rebooted again to make sure every thing was still in check After the second reboot not sure if I can call it Windows xp had BSOD. tried to reinstall windows, but it wont install correctly!? that i didn't even get the welcome screen Instead i got a quick flash of a BSOD stop error and that was it So after overall reboots I figured my computer had crashed and decided to do a clean install I got my original cd free of scratches and formatted the hard drive completely Then when setup began to copy the files about different files could not be copied I tried to install windows AT-LEAST times I only got past the welcome screen twice and windows was completely crippled even though it did manage to load I tried reformatting repairing the install created a new partition and tried to install and all have failed The thing i find strange is that almost each time it would copy files some of the files would change So I am at a loss and don't know what to do or try next any help I have a gb hd ram pentium Msi computer with an Aopen motherboard

A:Windows xp had BSOD. tried to reinstall windows, but it wont install correctly!?

Pity you reformatted, sometimes that BSOD stop code gives a little insight to a problem. Could have referenced to a hardware fault and somewhat ruled out a few possibilities.
I've also had this problem with files not transfering and I just bought another CD and it worked. It happens with Server 2003 too. The CD just suddenly stops working and thats it.
You could try cleaning your CD\DVD drives laser, but thats a bit of long shot really. (didn't help in my case)

http://www.techsupportforum.com/forums/f10/windows-xp-had-bsod-tried-to-reinstall-windows-but-it-wont-install-correctly-291784.html
Relevancy 41.71%

Haven t posted on here in a while because fortunately I haven t had any issues in a while - but if someone can help me with this I won t have to go to midtown on a Sunday just so I can throw my computer out of a higher window than my apartment I m running Windows -bit A few weeks ago I was doing normal stuff - web browsing probably playing a game SC and all of a sudden my screen starts turning this strange green color then everything freezes Earlier on in the month I had been having problems with my video card overheating so I assumed it was GPU after install BSOD Windows new the same I took it out cleaned it up and reseated it fixed it the previous time Worked fine for a bit then Windows BSOD after new GPU install what had been a weird green turned into purple streaks Rebooted again same problem except then it progressed into giving me purple streaks during boot up Either way cleaning and reseating the card did nothing to fix the issue like it had the previous time - after Windows BSOD after new GPU install a few reboots I actually couldn t even get to the windows load screen and I figured it was time to replace the card so I did that It was an old GeForce Windows BSOD after new GPU install GT Replaced the card with a Radeon HD Windows boots up gets past the load screen Login goes fine Then Blue Screened I assumed it was drivers or lack of drivers as I had gone from an NVidia card to an AMD but after going through reboot after reboot and changing drivers and deleting drivers and uninstalling and reinstalling drivers I kept getting the same thing I could login to windows but after about - seconds I d get blue screened I thought maybe it was still a driver issue NVidia PhysX from my old card was still showing up in add remove programs even after I deleted it and I just got fed up so I exchanged it and got a GTX ti thinking maybe that would solve the driver problem It did not After installing the GTX ti I get the same blue screen after the same amount of time safe mode works fine The windows error recovery window claims it has something to do with my version Symantec Endpoint Protection not being compatible with my version of Windows I refused and still kind of refuse to believe that was the error as I ve had it for years and never had any issue until I installed a new video card and apparently you can t just uninstall SEP without making edits to your registry manually I also just think that can t actually be the problem just because I ve been running it without issue for so long on this machine although srtspl sys does have something to do with Symantec according to Google I just tried making a Windows repair CD and running it but it did nothing to fix the problem so I m out of ideas I thought I d post here before I resort to spending a year backing everything up and reformatting Problem Signature BlueScreen OS Version Additional Information about the problem BCCode e BCP FFFFFFFFC BCP FFFFF BCP FFFFF BCP FFFFF E OS Version Service Pack Product Thanks

Relevancy 41.71%

hey guys i finally upgraded my com from gb sata hard disk to a TB WD caviar blue and upgraded my ram to gb x GB kingston MHZ x GB kingston MHZ So basiclly i want to make my TB hard disk my main slave so BSOD to install trying windows when x64 i have to install window plus currently now im using Windows ultimate x and as i know x doesnt support GB of Ram so i fixed everything up and put in my dvd to install windows Guess what windows setup start and BAM BCOD with error x E I read few thread about this error and it mention hardware BSOD when trying to install windows x64 problem Well i unplug by hardware and tried installing and i still get the same result So i tried removing my gb ram and tried again and TADA its works and fully installs without a nag when it was finally done i put back my gb and bam BCOS dead appear after windows splash screen and it keeps on restarting even in safe mode but when i remove x gb ram and run windows x on gb it work There's the problem I'm having hope u guys and gals can help me really BSOD when trying to install windows x64 want to use windows on gb oh and btw this is BSOD when trying to install windows x64 my system spec Operating System Windows Ultimate -bit trying to use x Asus P B mobo BIOS BIOS Date Ver Processor Intel R Core TM Duo CPU E GHz CPUs Memory MB RAM Available OS Memory MB RAM Nvidia Geforce GT Soundmax integrated HD audio TB WD caviar blue HDD Gb Seagate HDD

A:BSOD when trying to install windows x64

Looks like you have mis-matched ram speeds. Best to have all matched size, speed, & pair od ram

http://www.sevenforums.com/bsod-help-support/165829-bsod-when-trying-install-windows-x64.html
Relevancy 41.71%

I have a:

Toshiba Satelite P205-S7806

Windows Vista Home Premium
Intel Pentium Dual CPU T2330 @1.6GHz
RAM 2.00 GB
OS: 32 bit


Install starts just fine (from windows 7 disk). Upon first restart it loads to the Windows 7 startup screen. Next comes the BSOD! It contains the following errors:

STOP: 0x0000007B (0xF78D2524,0xC0000034,0x00000000,0x00000000)

This happens if I upgrade of try to install on a blank partition. Most Google searches tell me to change my SATA config in BIOS. Not sure if this is my problem or not, but I have no such settings in my BIOS. What step should I take next?

Note: This computer was running Windows 7 at one point before (about a year ago). Hard drive crashed while in Iraq. I sent it back home to a computer shop and they replace my hard drive (and gave me Vista! ). Aside from the hard drive, everything else is stock.

A:BSOD while trying to install Windows 7

No DMP files in upload please try this method.

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.


To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

http://www.sevenforums.com/bsod-help-support/203080-bsod-while-trying-install-windows-7-a.html
Relevancy 41.71%

I've seen a few other of these posts but no one seems to have resolved the issue I'm currently trying to install Windows XP on a Dell XPS that shipped with Windows Media Center Edition I'm aware that MCE is basically XP without the ability to enter a domain I get the BSOD right after the XP install disk gets done loading the drivers and it says quot Setup is starting Windows quot It's error x B I assumed it might be the sata or raid drivers so I tried supplying them on a floppy no dice Before each install I use Darik's Nuke and Boot to completely wipe the HDD's A few threads mentioned turning off RAID or switching SATA to ATA in BIOS RAID is off but I don't see any option for Windows install during BSOD XP switching SATA to ATA Did those posts perhaps mean physically swapping out the HDD's They made it sound like something you'd do in BIOS It should also be noted that I'm limited in what I can do with the Dell gimped BIOS I've tried different XP disks My BSOD during Windows XP install assumption is that there is some piece of hardware that the old XP disk can't handle but I can't figure out what Any ideas

A:BSOD during Windows XP install

First thing I would do is order the correct recovery disk set for Windows XP Media Edition from Dell

Dell Ordering New Recovery/Installation disks On-line
http://support.dell.com/support/topi...dhs&redirect=1

The current windows xp disk you are trying to use is it an original Microsoft disk or one from another manufacturer of computers like a Compaq, Gateway etc.?

http://www.techsupportforum.com/forums/f10/bsod-during-windows-xp-install-249356.html
Relevancy 41.71%

Hello,

I am getting a pretty frequent BSOD on windows 7. The dmp files seem to point to ntfs.sys. Can anyone suggest what might be wrong and how I can fix this? dmp files attached below.

Thanks!

A:BSOD in Windows 7 new install

STOP 0x24: NTFS.sys errors are usually fixed by:
- running CHKDSK /R from an elevated (Run as adminsitrator) Command Prompt
- or running a hard drive diagnostic: http://www.carrona.org/hddiag.html

More info on the error message here: http://www.carrona.org/bsodindx.html#0x00000024

The analysis of the dump files also points to issues with your McAfee software. I'd suggest uninstalling it, then using the McAfee Consumer Products Removal tool: http://service.mcafee.com/FAQDocument.aspx?id=TS100507

IMMEDIATELY install a free antivirus program to protect you while troubleshooting.

Update these drivers to ensure that they aren't causing issues:

Code:
aw_host5.sys Mon Feb 19 05:35:33 2007
awechomd.sys Mon Feb 19 05:35:10 2007
hcwPP2.sys Tue Feb 06 13:30:04 2007
Here's the memory dump analysis':

Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\FUBAR\TempDUMP\DATA\01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0xfffff800`02863000 PsLoadedModuleList = 0xfffff800`02aa0e50
Debug session time: Thu Nov 26 23:31:46.981 2009 (GMT-5)
System Uptime: 0 days 0:00:24.885
Loading Kernel Symbols
...............................................................
................................................................
....................
Loading User Symbols
Loading unloaded module list
....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 24, {1904fb, fffff88002f48818, fffff88002f48070, fffff800028dd0c4}

Probably caused by : Ntfs.sys ( Ntfs!NtfsAcquireExclusiveFcb+73 )

Followup: MachineOwner
---------

2: kd> !thread;!analyze -v;r;kv;lmtn;lmtsmn;.bugcheck;.logclose;q
GetPointerFromAddress: unable to read from fffff80002b0b000
THREAD fffffa8001923040 Cid 0004.0018 Teb: 0000000000000000 Win32Thread: 0000000000000000 RUNNING on processor 2
Not impersonating
GetUlongFromAddress: unable to read from fffff80002a49b74
Owning Process fffffa80018b4740 Image: System
Attached Process N/A Image: N/A
fffff78000000000: Unable to get shared data
Wait Start TickCount 1594
Context Switch Count 322
ReadMemory error: Cannot get nt!KeMaximumIncrement value.
UserTime 00:00:00.000
KernelTime 00:00:00.000
Win32 Start Address nt!ExpWorkerThread (0xfffff800028e2050)
Stack Init fffff88002f48db0 Current fffff88002f489f0
Base fffff88002f49000 Limit fffff88002f43000 Call 0
Priority 13 BasePriority 13 UnusualBoost 0 ForegroundBoost 0 IoPriority 2 PagePriority 5
Child-SP RetAddr : Args to Child : Call Site
fffff880`02f47828 fffff880`0126e3d8 : 00000000`00000024 00000000`001904fb fffff880`02f48818 fffff880`02f48070 : nt!KeBugCheckEx
fffff880`02f47830 fffff880`01342f80 : fffff880`0129efc8 fffff880`02f48be0 fffff880`02f48be0 fffff880`01342f6c : Ntfs! ?? ::FNODOBFM::`string'+0x2cc9
fffff880`02f47870 fffff800`029034dc : 00000000`00020000 fffffa80`00000000 fffff880`02f47cc0 fffff8a0`0102fa70 : Ntfs! ?? ::NNGAKEGL::`string'+0x7d3d
fffff880`02f478c0 fffff800`028fabed... Read more

http://www.techsupportforum.com/forums/f299/bsod-in-windows-7-new-install-435964.html
Relevancy 41.71%

Im getting a BSOD with error x Its a laptop HP CQ - EV without windows Im getting the blue screen when im trying to start the os installation from the win vista bit cd What i did First i tested memory with install BSOD to when trying windows memtest No errors but even with other memory im getting the same I did a bios update again i m getting the same Tried to reset bios to default settings and to remove cmos battery but nothing again Im out of ideas The only thing left now is the cpu test and im doing this while im writting this post There is something else that i can try maybe Thanks in advice P S The HD BSOD when trying to install windows is new also tested and passed the WD testing BSOD when trying to install windows tool without errors i moved the hp recovery partion from the old HD but even i tried to install windows from there im getting this blue screen P S sorry for not including what u ask but as i said i cant run windows on the machine

A:BSOD when trying to install windows

odd, what's the story of this pc ?

http://www.techsupportforum.com/forums/f299/bsod-when-trying-to-install-windows-589987.html
Relevancy 41.71%

Hi,

A couple days ago I did a fresh install of Windows 7 home premium x64 on my Dell Latitude E6400. Yesterday when I was transferring files over from my external hard drive I got a few blue screens. Then today while I was sharing files with a macbook on my home network through wifi I got another blue screen. I've attached the minidump files. Any ideas for what's causing this?

Thanks in advance.

A:BSOD on new Windows 7 install

Hi Jonas; welcome to the forum. Please read these threads and post back. We will be glad to help you.

[1 - Novice] How to ask for help with a BSOD problem

http://www.sevenforums.com/crashes-d...tructions.html

http://www.sevenforums.com/bsod-help-support/120913-bsod-new-windows-7-install.html
Relevancy 41.71%

Windows 7 installation fails with bsod when it tries to load driver vsmraid.sys (and I assume mount the hard disk). The only Windows/minidump directory is from an existing xp build.

A:Windows 7 64 bit Install BSOD

  
Quote: Originally Posted by John440b


Windows 7 installation fails with bsod when it tries to load driver vsmraid.sys (and I assume mount the hard disk). The only Windows/minidump directory is from an existing xp build.


These two crashes were caused by hardware. It also doesnt help that you have drivers that go back to 2001. These need to be updated. If it were me I would do a clean install of win 7

Before we can even attempt to identify the hardware problem you are going to have to update the drivers

Ken

DRIVERS MORE THAN A YEAR OLD AND AS MUCH AS 9 YEARS OLD


Code:
RDPCDD.sys 0xb268d000 0xb268e080 0x00001080 0x3b7d82c0 8/17/2001 3:46:56 PM
Beep.SYS 0xb2691000 0xb2692080 0x00001080 0x3b7d82e5 8/17/2001 3:47:33 PM
Null.SYS 0xba7a9000 0xba7a9b80 0x00000b80 0x3b7d82eb 8/17/2001 3:47:39 PM
mouhid.sys 0xba57c000 0xba57ef80 0x00002f80 0x3b7d82fd 8/17/2001 3:47:57 PM
BOOTVID.dll 0xba4b8000 0xba4bb000 0x00003000 0x3b7d8345 8/17/2001 3:49:09 PM
kdcom.dll 0xba5a8000 0xba5a9b80 0x00001b80 0x3b7d8346 8/17/2001 3:49:10 PM
Fs_Rec.SYS 0xb2693000 0xb2694f00 0x00001f00 0x3b7d8361 8/17/2001 3:49:37 PM
ParVdm.SYS 0xb2685000 0xb2686a80 0x00001a80 0x3b7d836d 8/17/2001 3:49:49 PM
ptilink.sys 0xba3e0000 0xba3e4580 0x00004580 0x3b7d8371 8/17/2001 3:49:53 PM
ftdisk.sys 0xb9f49000 0xb9f67880 0x0001e880 0x3b7d8419 8/17/2001 3:52:41 PM
dxgthk.sys 0xba690000 0xba690d00 0x00000d00 0x3b7d8438 8/17/2001 3:53:12 PM
Dxapi.sys 0xb35b7000 0xb35b9900 0x00002900 0x3b7d843f 8/17/2001 3:53:19 PM
raspti.sys 0xba3e8000 0xba3ec080 0x00004080 0x3b7d84c4 8/17/2001 3:55:32 PM
rasacd.sys 0xb115d000 0xb115f280 0x00002280 0x3b7d84cb 8/17/2001 3:55:39 PM
mnmdd.SYS 0xb268f000 0xb2690080 0x00001080 0x3b7d8538 8/17/2001 3:57:28 PM
dmload.sys 0xba5ac000 0xba5ad700 0x00001700 0x3b7d8567 8/17/2001 3:58:15 PM
audstub.sys 0xba73e000 0xba73ec00 0x00000c00 0x3b7d85bc 8/17/2001 3:59:40 PM
USBD.SYS 0xba62e000 0xba62f280 0x00001280 0x3b7d8682 8/17/2001 4:02:58 PM
WMILIB.SYS 0xba5aa000 0xba5ab100 0x00001100 0x3b7d878b 8/17/2001 4:07:23 PM
HDAudBus.sys 0xb89ef000 0xb8a17000 0x00028000 0x4295ef55 5/26/2005 10:46:29 AM
WDFLDR.SYS 0xb4b29000 0xb4b36000 0x0000d000 0x4549b22d 11/2/2006 3:54:05 AM
Wdf01000.sys 0xb0606000 0xb0681000 0x0007b000 0x4549b23a 11/2/2006 3:54:18 AM
vhidmini.sys 0xb9c6f000 0xb9c72180 0x00003180 0x46f0e551 9/19/2007 4:01:05 AM
JmtFltr.sys 0xb4b39000 0xb4b44f00 0x0000bf00 0x46fb51b3 9/27/2007 1:46:11 AM
Rtenicxp.sys 0xb89d5000 0xb89eea80 0x00019a80 0x4745a688 11/22/2007 10:55:52 AM
gdrv.sys 0xafe7f000 0xafe813e0 0x000023e0 0x475e1e9d 12/11/2007 12:22:37 AM
Lycosa.sys 0xb9052000 0xb9055f00 0x00003f00 0x47912b83 1/18/2008 5:43:15 PM
viamraid.sys 0xb9de4000 0xb9e00a00 0x0001ca00 0x479586f0 1/22/2008 1:02:24 AM
btport.sys 0xba388000 ... Read more

http://www.sevenforums.com/bsod-help-support/69952-windows-7-64-bit-install-bsod.html
Relevancy 41.71%

Hey I ve had this problem for awhile but I am trying to sell my computer now so it would be nice to get it to work After sticking in the windows XP cd and Xp even before install. BSOD Windows will copying the files from the disk to the HDD the computer restarts shows the windows boot screen and then gives the BSOD and this error Stop c a Fatal System Error The session manager initialization system process terminated unexpectedly with a status of xc c x x The system has shut down The current BSOD before Windows Xp will even install. hardware configuration is PC Partner AMD Mobo don t know BSOD before Windows Xp will even install. what model AMD venice x Corsair DDR Ram ATA gb hard drive I ve actually tried a few other OS s in hopes of it just being a windows thing but none of them work I ve looked at some of the solutions offered before I m planning on trying the quot uninstall updates quot method the XP copy I have is SP The other solutions don t apply Any help would be appreciated Thanks nbsp

A:BSOD before Windows Xp will even install.

You should always mention what "other solutions" you've ruled out.

If this is a clean install, you need to test the ram.

I would also verify that overheating is not causing a problem -- ensure the fan is working.
 

https://forums.techguy.org/threads/bsod-before-windows-xp-will-even-install.693967/
Relevancy 41.71%

I am getting a BSOD w/ this error message during the install of Windows XP pro on a gateway laptop model M675.

IRQL Not Less or Equal.

I havent seen this one before. I going to try to reinstall again to see exactly where during the install it hits this error.

Also after the BSOD the laptop will not start up. The power lights come on but it does not bring up the BIOS. It comes back on after about an hour. No lights for the HD, I removed and reset the memory and tried it only with one each of the 512 modules.
 

A:BSOD During Windows XP PRO Install

What says the first line of the BSOD?
 

https://forums.techguy.org/threads/bsod-during-windows-xp-pro-install.762062/
Relevancy 41.71%

Hi my uncle asked me to repair reinstall Windows bit 8.1 from BSOD DVD ISO Can't Windows install for him because it doesn't boot anymore So I downloaded an ISO and burned it on a DVD-RW with ImgBurn So far so good I checked if the files and folders on the DVD were burned properly They look just like the last time When I put the DVD in I changed the boot options in the BIOS to boot from the DVD drive After it reboots there is just like an underscore in the upper left corner blinking BSOD Can't install Windows 8.1 from DVD ISO After a while the Windows logo appears and the cycle starts spinning Then I get the BSOD saying quot Your PC ran into a problem and needs to restart quot Then after a second or two something like this appears quot Just wait while we BSOD Can't install Windows 8.1 from DVD ISO collect some info and restart quot I don't know if an error line popped up too - it was too fast I tried burning a second DVD-RW but it gave me the same error When I put in the DVD in my own Laptop it didn't work too But it didn't give me a BSOD but instead asked if I wanted to repair Windows or start normally What can I do now Thanks in advance

A:BSOD Can't install Windows 8.1 from DVD ISO

Hello,
Please start a new thread in the BSOD section for BSOD Problems.

Also please see this before posting: Blue Screen of Death (BSOD) Posting Instructions

http://www.eightforums.com/installation-setup/65614-bsod-cant-install-windows-8-1-dvd-iso.html
Relevancy 41.71%

Hello... I recently did a clean install of Windows 10.

I've gotten a couple of BSOD occurrences.

The most recent was a IRQL_NOT_LESS_OR_EQUAL. The previous one was different, but I don't recall the error message.

Please let me know what you think.

Thank you...

http://www.tenforums.com/bsod-crashes-debugging/55692-bsod-after-windows-10-install.html
Relevancy 41.71%

I have a Gateway MX Laptop I received from my grandparents when they replaced it with a beastly Fujitsu Lifebook I have been trying for days now to install an OS on it with no success Every time it is in the part of the install XP On BSOD Windows Install where it's got about - minutes left it Blue screens something about pages in a non paged area Error messages all relate to memory problems It was BRAND NEW memory I took it back and exchanged it thinking I got faulty memory for the same type and again same problem Then I thought I got the wrong memory but according to Gway no I didn't it's right So then I thought maybe my CD was crap Tried THREE other ones they didn't work So I said quot screw windows quot and tried installing Ubuntu This time I got through attempts with freezing then a message about a timer not being connected to IO-APIC whatever that means So I got to thinking about the memory again and remembered it has some sort of on-board memory for the graphics card like or something and one expansion slot up to GB which i put in And is it possible the on-board BSOD On Windows XP Install memory is the one that's crapping out If so does that mean the laptop should now be slammed against a tree spat on then swept into a storm drain Any suggestions Please I've tried all I can think of aside from dismantling the laptop and messing with internal organs

A:BSOD On Windows XP Install

Quote:





Originally Posted by Eluria


If so does that mean the laptop should now be slammed against a tree, spat on, then swept into a storm drain?





I'm not too familiar with gateways, but I'll give it a go. I'd like you to post the actual error message, with the stop error, when you get the blue screen. By the way, isn't your user name from the Dark Towers series?

http://www.techsupportforum.com/forums/f10/bsod-on-windows-xp-install-355427.html
Relevancy 41.71%

I just installed a new copy of Windows 7 Ultimate x64, had no issues for a day or so but it seems to give me a BSOD at random.

I have attached files to assist with solving this problem.

Thanks for any help you can provide me!!

A:BSOD new windows install

  
Quote: Originally Posted by Scola


I just installed a new copy of Windows 7 Ultimate x64, had no issues for a day or so but it seems to give me a BSOD at random.

I have attached files to assist with solving this problem.

Thanks for any help you can provide me!!


Memory exception caused by yours video driver (atikmdag.sys). re-install as directed.

When upgrading your graphic driver you MUST remove all traces of the current driver. In order to do that we recommend using Guru3D - Driver Sweeper

When it is removed then download and install the fresh copy.
Ken J

http://www.sevenforums.com/bsod-help-support/140384-bsod-new-windows-install.html
Relevancy 41.71%

Hi all,

I literally just re-installed Windows 7 on my machine. had not even gotten all the drivers downloaded yet and I got multiple blue screens. It was happening when I was downloading my nVidia Gt680 driver so I'm wondering if that is the issue...

Figured I would have the experts take a look.

Every time I try to install I get a BSOD

A:BSOD after new windows 7 install

Hi,

There are no crash dumps located in your output folder.

1. Start > type %systemroot% which should show the Windows folder, click on it. Once inside that folder, ensure there is a Minidump folder created. If not, CTRL-SHIFT-N to make a New Folder and name it Minidump.

2. Windows key + Pause key. This should bring up System. Click Advanced System Settings on the left > Advanced > Performance > Settings > Advanced > Ensure there's a check-mark for 'Automatically manage paging file size for all drives'.

3. Windows key + Pause key. This should bring up System. Click Advanced System Settings on the left > Advanced > Startup and Recovery > Settings > System Failure > ensure there is a check mark next to 'Write an event to the system log'.

Ensure Small Memory Dump is selected and ensure the path is %systemroot%\Minidump.

4. Double check that the WERS is ENABLED:

Start > Search > type services.msc > Under the name tab, find Windows Error Reporting Service > If the status of the service is not Started then right click it and select Start. Also ensure that under Startup Type it is set to Automatic rather than Manual. You can do this by right clicking it, selecting properties, and under General selecting startup type to 'Automatic', and then click Apply.

If you cannot get into normal mode to do any of this, please do this via Safe Mode.

Regards,

Patrick

http://www.techsupportforum.com/forums/f299/bsod-after-new-windows-7-install-909002.html
Relevancy 41.71%

Hi:

I just recently acquired a win7 pro 64 thru work. Loaded it on my machine and have gotten 2 bsod in 2 days.

Most of my system is 2-3 years old. However, Ive had the PSU, and GPU recently RMA'd.

Uploaded, attached a zip file as per the instructions.

Any help would be excellent.

THANKS!

A:New windows Install, Bsod

  
Quote: Originally Posted by Thebluemeow


Hi:

I just recently acquired a win7 pro 64 thru work. Loaded it on my machine and have gotten 2 bsod in 2 days.

Most of my system is 2-3 years old. However, Ive had the PSU, and GPU recently RMA'd.

Uploaded, attached a zip file as per the instructions.

Any help would be excellent.

THANKS!


The most glaring thing is asacpi.sys (your version 2005)
The pre 2009 version of this driver is a known BSOD cause.

The 2005 version of this driver is a known BSOD cause.
Please visit this link: ASUS teK Computer Inc. -Support- Drivers and Download P7P55D LE
Scroll down to the Utilities category, then scroll down to the "ATK0110 driver for WindowsXP/Vista/Windows 7 32&64-bit" (it's about the 12th item down).
Download and install it.
Go to C:\Windows\System32\drivers to check and make sure that the ASACPI.sys file is date stamped from 2009 or 2010 (NOT 2005).

http://www.sevenforums.com/bsod-help-support/157450-new-windows-install-bsod.html
Relevancy 41.71%

I recently assembled a new computer and BSOD x64 install during 7 Windows I'm receiving a blue screen during the installation process After loading all of the drivers windows crashes on the screen where the windows logo is displayed before and kind of screens or prompts are displayed I'm getting the following error message STOP x E ACPI SYS Here are my system specs Core i - K Antec W x gb G Skill Ripjaw DDR ASRock Z Extreme LGA Radeon HD PCI-E WD Caviar TB rpm I have tried quite a few things to narrow down the problems I don't believe my ram is the issue I have run memtest on it and it tested all gigs with no errors Out of frustration I have also taken my hdd and the windows iso dvd to an existing computer pulled the hdd from that and Windows 7 x64 BSOD during install installed windows on the new hdd thinking that I could put that drive in my new computer after the install However I'm getting the same problem when that hdd is put back in my new machine and I attempt to boot from it I think that this does exclude the hdd or the burned iso dvd as being the issue Windows 7 x64 BSOD during install though I Windows 7 x64 BSOD during install also put in a linux dvd and booted from linux live thinking that I could get additional error messaging but I was surprised to find that my computer booted into linux just fine I have tried stripping everything out of the mobo and running off what the bare minimum requirements were to boot I have also tried taking out all the components and putting them back in including cpu and I have verified that no cables are loose I have also tried re-ordering the sata cables between the dvd drive and the hdd So far nothing I have tried has worked The bios does not post any kind of errors I'm running out of ideas I feel like I've gone through just about every potential problem that could be causing this Thanks in advance for looking into this with me

A:Windows 7 x64 BSOD during install

In BIOS under Advanced you should be able to see the settings for Hard drive or sata controller
make sure your settings are set to SATa/IDE not AHCI or raid
save and exit
try to install windows again
I would also look at the DVD you have for windows and if possible burn an other dvd maybe something is wrong during the burning process

http://www.techsupportforum.com/forums/f299/windows-7-x64-bsod-during-install-643475.html
Relevancy 41.71%

hi i built my friends computer for him not my first and went to install win ultimate bit the system booted just fine started the quot windows is loading files quot screen once all the files loaded it went to the quot starting windows quot screen where the orbs of light come together to form the windows emblem but a couple seconds after it goes from loading files to starting it BSODs the system specs are -Windows ultimate Bit - purchased -OEM caviar green WD GB HDD -OEM Samsung Bluray drive -AMD Phenon II x processor -Asus M A TD EVO motherboard -EVGA Nvidia GSO video card -Rosewill watt PSU i have updated the bios to the most recent build and the bsod changed what it was complaining about from netio sys DRIVER IRQL NOT LESS OR EQUAL to netio sys PAGE FAULT IN NONPAGED AREA this happens with win bit i tried to install bit install windows 7 BSOD on vista ultimate and it bsoded again same place only the bsod pointed to something else pci sys PAGE FAULT IN NONPAGED AREA STOP x oxffffff x x e fc x pci sys - address e fc base at datestamp adc after that i tried to install windows xp home ed sp that actually worked and i was able to run it and got it updated to sp and ran the BSOD on windows 7 install windows update advisor that file is attached bit and bit said the same thing BSOD on windows 7 install after BSOD on windows 7 install it was fully updated i put the vista bit disk back in to try the upgrade system option it work just fine till it had to restart at which point it would load a black screen and do nothing i thought that it might have been caused by the upgrading maybe the MBR needed to be reset so i put in my win boot loader repair disk but right after that loaded the files it BSODed last ditch effort i tried a copy of windows ultimate bit once it finished loading files it froze in the quot starting windows quot screen so i tried it again but told it to boot setup in safemode that seemed to work it started spewing all the drivers that it was loading then once it reached quot disk sys quot it BSODed pointing at quot msrpc sys quot with a datestamp of quot quot right now the computer is running killdisk to reformat the HDD i am running out of ideas please help me

A:BSOD on windows 7 install

How is your drive configured in the BIOS - as SATA or IDE? Have you updated the BIOS? Have you set default values in the BIOS? How much RAM do you have installed? Have you tried installing with all but the basic hardware installed? Have you tried disabling your onboard NIC?

http://www.sevenforums.com/installation-setup/95437-bsod-windows-7-install.html
Relevancy 41.71%

Hello,

I am getting a pretty frequent BSOD on windows 7. The dmp files seem to point to ntfs.sys. Can anyone suggest what might be wrong and how I can fix this? dmp files attached below.

Thanks!
 

A:BSOD in Windows 7 new install

could be a missing storage driver or corrupted installation. you could try putting in your win7 OEM disk and try to recopy the file. 90% of BSODs are caused by drivers though so check to see if all of your drivers are installed using Device Manager. you may have to download some windows 7 beta drivers in order for some of the hardware to work properly. a lot of older hardware may be unsupported...
 

http://www.techspot.com/community/topics/bsod-in-windows-7-new-install.138757/
Relevancy 41.71%

Dear all I've been having this problem for a while install on BSOD Windows 7 - new x64 now but I didn't know what to do Until recently I googled for some answers but the closest thing I can get is to locate the minidump files My system is is a Lenovo U laptop among one of the first few shipment releases almost years ago CPU Intel C D P Ghz Ram GB DDR x I borrowed from a friend thinking it could be the ram BSOD on new install - Windows 7 x64 issue but still running into BSOD Video ATI Mobility Radeon HD Mobile Intel Series I believe it's HD HD Samsung GB this one I borrow from my friend for testing if it's HD failure but still running into BSOD I did a fresh install of Windows x and installed all win driver available I can get from Lenovo support website I still get BSOD quite frequently I have attached the minidump files I located and hoping someone will be able to help me identify the possible root causes as I can no longer stand sudden crashed while working on something important Thank you in advance and I appreciate any support Sincerely Yours

A:BSOD on new install - Windows 7 x64

Hi,

The summary says it all


Code:

BugCheck 124, {0, fffffa8005c4c038, b2000000, 60151}
Probably caused by : hardware
??????????????????????????????????????????????????????????????????????????????????????``
BugCheck 124, {0, fffffa8005c65038, b2000000, 60151}
Probably caused by : hardware
??????????????????????????????????????????????????????????????????????????????????????``
BugCheck 124, {0, fffffa8005c34038, b2000000, 60151}
Probably caused by : hardware
??????????????????????????????????????????????????????????????????????????????????????``
BugCheck 124, {0, fffffa8005c5d038, b2000000, 60151}
Probably caused by : hardware
??????????????????????????????????????????????????????????????????????????????????????``
BugCheck 124, {0, fffffa800514a038, b2000000, 60151}
Probably caused by : hardware
??????????????????????????????????????????????????????????????????????????????????????``

So, run some hardware tests to try and figure out what part it is


Quote:




Memtest86+ - Instructions:

Download the ISO (or the .exe for USB drives) from here http://www.memtest.org/#downiso

Then (if you have chosen the ISO) burn the ISO using IsoRecorder: ISO Recorder v3 Download (How to use IsoRecorder)

Boot from the CD/USB and run the test (at least 7 passes per test) with only one stick of RAM in place at a time.

It is a time consuming process but it is the only way to be sure it isn't a RAM fault.

For your final test, run the test with all the RAM in place.




http://www.sevenforums.com/tutorials...t-prime95.html (run the Blend test as well as the Small FFT test)


Quote:




FurMark - Instructions:

Download from here: http://www.ozone3d.net/benchmarks/fur/
- If you have more than one GPU, select Multi-GPU during setup
- In the Run mode box, select "Stability Test" and "Log GPU Temperature"
Click "Go" to start the test
- Run the test until the GPU temperature maxes out - or until you start having problems (whichever comes first).
- Click "Quit" to exit




Regards,
Reventon

BUGCHECK SUMMARY

Code:

Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Thu Sep 30 16:58:12.447 2010 (GMT+13)
System Uptime: 1 days 1:54:15.414
Probably caused by : hardware
BUGCHECK_STR: 0x124_GenuineIntel
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: uTorrent.exe
Bugcheck code 00000124
Arguments 00000000`00000000 fffffa80`05c4c038 00000000`b2000000 00000000`00060151
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Tue Sep 28 15:22:29.035 2010 (GMT+13)
System Uptime: 0 days 1:09:30.001
Probably caused by : hardware
BUGCHECK_STR: 0x124_GenuineIntel
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
Bugcheck code 00000124
Arguments 00000000`00000000 fffffa80`05c65038 00000000`b2000000 00000000`00060151
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Mon Sep 27 22:21:42.198 2010 (GMT+13)
System Uptime: 0 days 2:08:27.164
Probably caused by : hardware
BUGCHECK_STR: 0x124_GenuineIntel
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: chrome.exe
Bugcheck code 00000124
Arguments 00000000`00000000 fffffa80`05c34038 00000000`b2000000 00000000`00060151
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Mon Sep 27 20:10:25.832 2010 (GMT+13)
System Uptime: 0 days 1:49:53.798
Probably caused by : hardware
BUGCHECK_STR: 0x124_GenuineIntel
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: chrome.exe
Bugcheck code 00000124
Arguments 00000000`00000000 fffffa80`05c5d038 00000000`b2000000 00000000`00060151... Read more

http://www.techsupportforum.com/forums/f299/bsod-on-new-install-windows-7-x64-518235.html
Relevancy 41.71%

Alright guys here s a tricky one for you I was doing a regular spyware check with Spybot S amp D oddly enough I get hits I usually have nothing So I initiate the removal then bam BSOD But it just flashed the BSOD then restarted so I couldnt see what it was Then upon restart it got to the windows screen and BSOD ed again rinse and repeat I tried taking out my hardware Video card then I tried swapping RAM and removing one stick at a time etc Nothings working So I decide to format reinstall windows This is where it gets messy lol I dont have a CD drive or a floppy drive The only drive I have is my Maxtor gb SATA So I setup a USB stick to do windows On install BSOD a low level format with quot KillDisk quot The format takes hours but is successful then I set up my USB stick to do a windows install BSOD On windows install all is well I get windows setup fired up it starts loading files and drivers etc then when it gets to the quot Setup is starting Windows quot bam BSOD BSOD On windows install again After that I did a HDD diagnostics with Dell s built in utility Since I cant get to CMD to run CHKDSK etc Everything checks out on the HDD as far as dell s utility could tell I also tried slipstreaming some SATA drivers into my windows install but I couldnt quite tell if that worked correctly The exact error code im getting is this B xF A C Could somebody please point me in the right direction BSOD On windows install Or atleast tell me exactly what this error code means as I couldnt find a definitive answer on the net nbsp

Relevancy 41.71%

Hey guys

I keep getting a BSOD when trying to reinstall windows 7 on my comp. It came up before so I decided to reformat the computer but now I can't even do that.
Heres the error, sorry i couldn't give any more information.

page fault in nonpaged area
0x00000050

I've tried looking up what that error could mean, and I've found out its either the memory, processor or graphics card. They said it could be the software, but since its reformatted I assume it can't be that.

Information about computer:
-32 bit capable of 64
-not original installed os
-retail
-bout 2 years old


Cheers
-Ash

A:BSOD while trying to install windows

Does the BSOD create a dump file?

http://www.sevenforums.com/bsod-help-support/139493-bsod-while-trying-install-windows.html
Relevancy 41.71%

Hello,
I am having issues with random bsod on a newly assembled pc. I am running an asus p7p55d-e and core i7 860 and 8gb's g.skill F3-12800CL9D-4GBNQ. As I say it is completely random. The first time it occurred was while first installing windows. It was about 35% of the way through the process. Since then it is completely random. Any help would be greatly appreciated. I have run memtest with 6 passes and no errors. as you see in the dump files it seems to point to ntoskrnl.exe - Any help would be greatly appreciated. Attachment 63343

A:bsod on new install of windows 7

  
Quote: Originally Posted by billybobhobw


Hello,
I am having issues with random bsod on a newly assembled pc. I am running an asus p7p55d-e and core i7 860 and 8gb's g.skill F3-12800CL9D-4GBNQ. As I say it is completely random. The first time it occurred was while first installing windows. It was about 35% of the way through the process. Since then it is completely random. Any help would be greatly appreciated. I have run memtest with 6 passes and no errors. as you see in the dump files it seems to point to ntoskrnl.exe - Any help would be greatly appreciated. Attachment 63343


Hi billybobhobw.
These crashes were highly likely caused by memory.

You will need to do the following -
1. Memory-download memtestx86 and run for at least 5 passes
2. Run a system file check to verify and repair your system files.
Go to search - right click to run as Administrator - type in sfc /scannow.
[Make sure you have a space between sfc and / ]
3.If you are overclocking-stop
4.You must update the old drivers.

Please report back & let us know the results.
Thanks. Jan.



Code:
032610-22869-01.dmp 27/03/2010 3:22:53 PM BAD_POOL_HEADER 0x00000019 00000000`00000003 fffff8a0`09b55620 fffff8a0`09b55620 fa800884`9f9004c0 fltmgr.sys fltmgr.sys+4962 x64 C:\Users\JMH\Desktop\dump-files\032610-22869-01.dmp 8 15 7600
032510-21918-01.dmp 27/03/2010 3:22:53 PM MEMORY_MANAGEMENT 0x0000001a 00000000`00041790 fffffa80`0318f570 00000000`0000ffff 00000000`00000000 ntoskrnl.exe ntoskrnl.exe+71f00 x64 C:\Users\JMH\Desktop\dump-files\032510-21918-01.dmp 8 15 7600
032510-19562-01.dmp 27/03/2010 3:22:53 PM MEMORY_MANAGEMENT 0x0000001a 00000000`00041790 fffffa80`03265d40 00000000`0000ffff 00000000`00000000 ntoskrnl.exe ntoskrnl.exe+71f00 x64 C:\Users\JMH\Desktop\dump-files\032510-19562-01.dmp 8 15 7600
032510-19094-01.dmp 27/03/2010 3:22:53 PM MEMORY_MANAGEMENT 0x0000001a 00000000`00041790 fffffa80`031ec570 00000000`0000ffff 00000000`00000000 ntoskrnl.exe ntoskrnl.exe+71f00 x64 C:\Users\JMH\Desktop\dump-files\032510-19094-01.dmp 8 15 7600
032510-18236-01.dmp 27/03/2010 3:22:53 PM MEMORY_MANAGEMENT 0x0000001a 00000000`00041790 fffffa80`03250d70 00000000`0000ffff 00000000`00000000 ntoskrnl.exe ntoskrnl.exe+71f00 x64 C:\Users\JMH\Desktop\dump-files\032510-18236-01.dmp 8 15 7600

http://www.sevenforums.com/bsod-help-support/74022-bsod-new-install-windows-7-a.html
Relevancy 41.71%

Hi there,

Just bought an upgrade to RAM, graphics, processor and motherboard this week and have been having problems with it since.

I keep getting BSOD whether is be memory_management, NTFS.sys , or usbhub.sys. on clean installs on a range of new and old hard drives.

I have run memtest and is gave and error first time but haven't been able to replicate the error since.

System spec is currently:

Asus p8p67 LE
i5-2500K
Nvidia 8800GTS 640MB (haven't installed HD6850 yet)
4GB RAM Corsair XMS3 2x2GB CMX4GX3MA1600C9 xmp
Toughpower 650W
WD 640GB HDD/ 2TB EARS/2TB EAXS

attached is dump file. any ideas what is going wrong?

A:BSOD on clean install of windows 7 and windows update

Hi.

Run Disk Check
Check the Automatically fix file system errors box.
Check the Scan for and attempt recovery of bad sectors box

Run SFC /SCANNOW Command - System File Checker

Run RAM - Test with Memtest86+
Finish and post back with results.

http://www.sevenforums.com/bsod-help-support/193051-bsod-clean-install-windows-7-windows-update.html
Relevancy 41.71%

I have a new laptop (Compaq Pressario CQ61) that has Windows 7 Home Premium (64 bit) installed. This computer has an AMD processor. I am trying to set it up to dual boot Windows XP Home Edition.

I didn't have any issues partitioning the hard drive. I used nLite to slipstream my Windows XP installation disk. I added SP2 and the SATA drivers. I then burned this onto a DVD disk. Next I booted from CD using the disk I created. The installation runs through loading the files, but when it gets to "Setup is starting windows" I get the blue screen of death. The stop code is 0x00000007B.

I used the guide at the following address to download the SATA driver and complete the slipstreaming process.
http://h30434.www3.hp.com/t5/Operat...for-XP-solution-on-0x0000007B-BSOD/m-p/114120

Any guidance you can provide on how to resolve this issue is greatly appreciated.
 

http://www.techspot.com/community/topics/bsod-when-trying-to-install-windows-xp-for-dual-boot-with-windows-7.149859/
Relevancy 41.71%

Any ideas? I just installed all the drivers from Dell (this is an XPSL521X) so I would guess it is one of those.

A:Fresh install of Windows BSOD during sleep - Windows 8.1

ehhh might be something with RAM like freq. or timings but for now:

Update

RtsPStor RtsPStor.sys Wed Jun 13 06:08:38 2012 (4FD866A6) <<< From Realtek's website, card reader

Update or uninstall:

stdcfltn stdcfltn.sys Fri Jul 13 19:30:14 2012 (5000AF86)

Update the video driver package for both Intel/NVIDIA from Dell if not already latest. (The crash involved dxgkrnl but that doesn't necessarily mean a video driver was at fault.)

You should attach a screenshot of CPU-Z Memory tab and one each for each stick of RAM of SPD tab.

http://www.eightforums.com/bsod-crashes-debugging/41319-fresh-install-windows-bsod-during-sleep-windows-8-1-a.html
Relevancy 41.28%

Hi guys I have a problem with installing windows on my PC I will tell you everything I did until this point in time My computer had a really bad virus on it which prevented it from starting up windows so I bought a recovery disc to re-install windows on it I used the x bit installation type to install windows as the PC originally had x bit as it's compatible with it Whilst the installation I typed after x64 bit install BSOD Windows Vista in my license key chose custom installation chose my hard drive to install windows and it's started to BSOD after Windows Vista x64 bit install do it's thing Everything went very smoothly whilst installing windows until I rebooted my system in order for the installation to finish It came up with an error message saying that the installation was not finished please reboot your system I rebooted my system and the error message popped up again and again after each reboot I finally got rid of this problem by opening up command prompt by pressing quot Shift F quot and I typed in quot regedit quot while the error message was still up I went through quot HKEY LOCAL MACHINE SYSTEM Setup Status ChildCompletion quot and I changed the unit of quot setup exe quot by double clicking on it and changing the unit to quot quot I then exited command prompt and rebooted my system After the reboot this seemed to fix the installation problem and windows started for the first time I typed in all my details about the user of the computer and other stuff and rebooted After it rebooted I logged into my user account and an error message came up at the start-up on my desktop saying quot Windows has recovered from an unexpected shutdown quot The details were Problem signature Problem Event Name Blue Screen OS Version Locale ID Additional information about the problem BCCode e BCP FFFFFFFFC BCP FFFFF E BCP FFFFF FE BCP FFFFF F OS Version Service Pack Product Files that help describe the problem C Windows Minidump Mini - dmp C Users Admin AppData local Temp WER- - sysdata xml C Users Admin AppData local Temp WERD A tmp version txt Read our privacy statement http go microsoft com fwlink likeid amp clcid x I instantly knew that after I reboot I will get a BSOD with the same details as this and so when I rebooted my system I got a BSOD with this information Technical information STOP x E xFFFFFFFFC xFFFFF E xFFFFF CB E xFFFFF CB After some research on the internet I installed a program called quot BlueScreenView quot to see what was causing the BSOD After I ran the program it showed two files highlighted red from the Mini Dump file The files were quot djsvs sys quot and quot storport sys quot I know that you can fix this by installing the latest service pack but I don't think you can install all the service packs at once since you need to reboot your system all the time and rebooting my system once most of the time after installation causes a BSOD I've tried many things to fix this but nothing However I'm able to install bit windows x without any problems whatsoever but I don't want to run a bit system but a bit one My PC had ran a bit operating system ever since I first bought it which was around years ago but now I can only install bit but not bit I've literally tried to install this for like times but no luck I searched for the two files causing these problems in task manager and msconfig but I don't think it's there Maybe it's called something else What do you think I should do to fix this problem Thank you very much for your time EDIT I've managed to find an installation for Vista bit which does not contain any of these problems This installation will download any version of Vista bit which also includes Service Pack You can find the installation files on this thread here http www vistax com general-discussion -vista-iso-download html I used this thread to install Vista bit without any problems You will need to run the exe file after you download and this will create a file called quot Vista quot which can install any ve... Read more

http://www.vistax64.com/crashes-debugging/301004-bsod-after-windows-vista-x64-bit-install.html
Relevancy 41.28%

So, I was having multiple problems with my system, including BSODs. I reinstalled Windows.
One day later I got a BSOD.
Caused by ntoskrnl.exe - critical object termination.
I am really starting to suspect it is my RAM at this point - can anyone verify this?
All files included. Thank You.

A:Ntoskrnl.exe BSOD after new Windows 7 install

catz95, I will try ti help with this error. You only have one dump file, Please do not run any disk cleanup tools as they sometimes will clean all dump and error reporting files which we will need. From your one dump file, I see nothing that indicates it is ram. However, that does not mean it isn't ram.

Can you tell me any more information about the crashes. Does it happen while using a specific program or during any specific activity? Is there anything you usually do that results in a crash? Any information you can provide will help out a lot. This is what I got from your one dump file.


Code:
CRITICAL_OBJECT_TERMINATION (f4)
A process or thread crucial to system operation has unexpectedly exited or been
terminated.
Several processes and threads are necessary for the operation of the
system; when they are terminated (for any reason), the system can no
longer function.
Arguments:
Arg1: 0000000000000003, Process
Arg2: fffffa8009194710, Terminating object
Arg3: fffffa80091949f0, Process image file name
Arg4: fffff80002fc6270, Explanatory message (ascii)
Debugging Details:
------------------
----- ETW minidump data unavailable-----
PROCESS_OBJECT: fffffa8009194710
IMAGE_NAME: wininit.exe
DEBUG_FLR_IMAGE_TIMESTAMP: 0
MODULE_NAME: wininit
FAULTING_MODULE: 0000000000000000
PROCESS_NAME: wininit.exe
EXCEPTION_CODE: (NTSTATUS) 0xc0000006 - The instruction at 0x%p referenced memory at 0x%p. The required data was not placed into memory because of an I/O error status of 0x%x.
BUGCHECK_STR: 0xF4_IOERR
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
CURRENT_IRQL: 0
ANALYSIS_VERSION: 6.3.9600.17298 (debuggers(dbg).141024-1500) amd64fre
STACK_TEXT:
fffff880`068b89c8 fffff800`0304eab2 : 00000000`000000f4 00000000`00000003 fffffa80`09194710 fffffa80`091949f0 : nt!KeBugCheckEx
fffff880`068b89d0 fffff800`02ff9abb : ffffffff`ffffffff fffffa80`09b35880 fffffa80`09194710 fffffa80`09194710 : nt!PspCatchCriticalBreak+0x92
fffff880`068b8a10 fffff800`02f78f04 : ffffffff`ffffffff 00000000`00000001 fffffa80`09194710 0000007f`00000008 : nt! ?? ::NNGAKEGL::`string'+0x17486
fffff880`068b8a60 fffff800`02cbfe53 : fffffa80`09194710 00000000`c0000006 fffffa80`09b35880 00000000`7794c541 : nt!NtTerminateProcess+0xf4
fffff880`068b8ae0 00000000`7797157a : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
00000000`009df7b8 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x7797157a

STACK_COMMAND: kb
FOLLOWUP_NAME: MachineOwner
IMAGE_VERSION:
FAILURE_BUCKET_ID: X64_0xF4_IOERR_IMAGE_wininit.exe
BUCKET_ID: X64_0xF4_IOERR_IMAGE_wininit.exe
ANALYSIS_SOURCE: KM
What is outlined in red is the only thing that is of any help at this point. Once we gets several, we may be better able to see a pattern.

Would you look at your system specs and see if there is any additional info that would help, like the Manufacturer and model of your PSU as well as what CPU Cooling you use. We sometimes have to look up a component and need the Manufacturer and model of any component to do that.

I would like to know your CPU and GPU temps at all times. If you need software that will do that, I will suggest some.

The part above in red is the Stop Code 0XF4 and a reason of an I/O error which suggests the file system or a hard drive, to me.
Please run the short and long test with Seatools for Dos on your hard drive. Please read the instructions carefully SeaTools for DOS and Windows - How to Use

Also run Check Disk Disk Check

Please let us know the results as well as any reason you would think it could be memory. Also, if you have any more BSODs please upload the Blue Screen of Death (BSOD) Posting Instructions again in a new post.

http://www.sevenforums.com/bsod-help-support/356557-ntoskrnl-exe-bsod-after-new-windows-7-install.html
Relevancy 41.28%

nbsp nbsp Quote Originally Posted by gregrocker Answer You need to boot from the Windows installer and select Custom gt Advanced 7 BSOD) Windows Install Crashing (No Tools to delete create and format your desired partitions even one Make sure you click 'Format' on the partition you want to install Windows to don't just create the new partition and press 'Go' I have a Core i Gigabyte EX -UD R Radeon HD MB GB DDR G Skill RAM exact specs can be seen in profile and I'm having issues trying to install Windwos I backed up all my stuff from XP onto my external Windows 7 Install Crashing (No BSOD) got ready to reformat like normal tossed the Windows x Professional disc into the drive and booted from CD Everything worked like normal Windows is Windows 7 Install Crashing (No BSOD) a bit different in that it doesn't run in a BIOS-type setting like XP but rather has its own little graphical install interface Figured out what I wanted custom install quot deleted quot the old partition and pressed go I thought it was weird that it didnt quot format quot the hard drive like XP installation does I know I can get a boot disc with 'Book and Nuke' to wipe the hard drive which I may do but I figured since Windows didn't want to format that it wasn't entirely necessary Goes through the expanding files fine whatever else it does on the first isntall screen and then it gets to the restart phase Restart goes well automatically shuts down and boots back up getting to the screen that says 'Starting Windows ' and then crashes Monitor gets the 'No Signal' message computer stays shut off for a few seconds and then powers back up It gives me the 'Windows crashed and recovered from an error' selection where I can choose how I want to boot Safe Mode Last Good Configuration etc and I've tried the 'Boot like Normal' configuration and it will just continue this cycle The first time I tried installing Windows it got past this screen got to the portion of the installation where it automatically adjusts the resolution and then after that it crashed Since then I have not been able to get past the first reboot without a constant restart loop I tried -bit with the exact same results I have disabled all but core and disabled hyperthreading this was required to install XP beacuse I don't have a SP disc to see if it worked but the same thing happened Reset BIOS to factory defaults same thing Changed back to core no hyperthreading and same thing happened again I have no extra video cards I can try but I could ask my brother if I can borrow his quot widescreen HANNS-G monitor but unless I'm mistaken I don't think this is an issue that a monitor would fix I'm not the most computer-savvy person but I can work my way around I don't know if there is a log file I can access and post here to see what the last thing that happened the error is but I never get a BSOD with an error I can post just a restart and Windows telling me there was an error and asking how I want to boot If there is any additional information I can post to help with this I will provide it as best I can Just want to get up and running wouldn't have imagined it would be this hard -

A:Windows 7 Install Crashing (No BSOD)

  
Quote: Originally Posted by llDemonll


I thought it was weird that it didnt "format" the hard drive like XP installation does,.


You need to boot from the Win7 installer and select Custom>Advanced Tools to delete, create and format your desired partitions (even one).








  
Quote: Originally Posted by llDemonll


Changed back to 1 core, no hyperthreading and same thing happened again.


Do not do this. XP was last-century in that regard.


You can boot from the installer and in Repair console try Startup Repair 3 times to be sure.

I have re-read your post 3 times and what I would do is a clean reinstall with formatting. In fact, I would delete all, then create new partition(s) and format then install to the first.

http://www.sevenforums.com/installation-setup/31928-windows-7-install-crashing-no-bsod.html
Relevancy 41.28%

Decided finally to update my desktop from RTM to Ultimate. Everything was running kosher-like in RTM for the past 6 months, but installing the legit version has become a friggin' nightmare. After install, first time starting windows gives me a BSOD (can't even get past login). Safe mode, at least works...

First it was my newly installed HD 4650. Put back my ancient x800xl. Then it was some random NForce 4 drivers...now...no clue.

Specs:
NForce 4 Ultra (DFI LanParty)
Athlon 64 x2 3800+
ATI X800 XL

Attached is the dump file...

Thanks in advance for any help that can be provided.

A:Windows 7 x64 Fresh Install BSOD

  
Quote: Originally Posted by l1fe


Decided finally to update my desktop from RTM to Ultimate. Everything was running kosher-like in RTM for the past 6 months, but installing the legit version has become a friggin' nightmare. After install, first time starting windows gives me a BSOD (can't even get past login). Safe mode, at least works...

First it was my newly installed HD 4650. Put back my ancient x800xl. Then it was some random NForce 4 drivers...now...no clue.

Specs:
NForce 4 Ultra (DFI LanParty)
Athlon 64 x2 3800+
ATI X800 XL

Attached is the dump file...

Thanks in advance for any help that can be provided.



This one was caused by memory corruption.

To test y ouor memory download memtestx86 and run it for 5 passes. that will test your memory and tell you if you have a heat issue.

You might as well run a system file check
type cmd in search>right click and run as admin>SFC /SCANNOW

Let us know the results

Ken

Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\K\Desktop\022010-35906-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*d:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0xfffff800`02857000 PsLoadedModuleList = 0xfffff800`02a94e50
Debug session time: Sat Feb 20 14:51:55.640 2010 (GMT-5)
System Uptime: 0 days 0:03:22.406
Loading Kernel Symbols
...............................................................
................................................................
.........
Loading User Symbols
Loading unloaded module list
....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 50, {fffffb41d6ff062b, 0, fffff800028dcd3b, 7}
Could not read faulting driver name
Probably caused by : memory_corruption ( nt!MiAgeWorkingSet+41b )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced. This cannot be protected by try-except,
it must be protected by a Probe. Typically the address is just plain bad or it
is pointing at freed memory.
Arguments:
Arg1: fffffb41d6ff062b, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffff800028dcd3b, If non-zero, the instruction address which referenced the bad memory
address.
Arg4: 0000000000000007, (reserved)

Debugging Details:
------------------
Could not read faulting driver name

READ_ADDRESS: GetPointerFromAddress: unable to read from fffff80002aff0e0
fffffb41d6ff062b

FAULTING_IP:
nt!MiAgeWorkingSet+41b
fffff800`028dcd3b 410fb65f1b movzx ebx,byte ptr [r15+1Bh]

MM_INTERNAL_CODE: 7

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

BUGCHECK_STR: 0x50

PROCESS_NAME: LogonUI.exe

CURRENT_IRQL: 0

TRAP_FRAME: fffff880031167a0 -- (.trap 0xfffff880031167a0)
NOTE: The trap frame does not contain all regi... Read more

http://www.sevenforums.com/bsod-help-support/65196-windows-7-x64-fresh-install-bsod.html
Relevancy 41.28%

Hello! First time poster here and I do hope I've done this correctly! I've just installed windows 8 and am getting seemingly random BSODs. No problems before on Windows 7 so i'm hoping its just a driver issue, however i'm not sure which Driver could be causing the problem.

I've updated Windows update a few times already with no luck.

Thank you for taking a look!

A:BSOD Errors on new Windows 8 Install

Hello, I reset my bios to default after doing so more reading and so far this AM no BSODs after 3 hours of use. I'll report back later but this might have solved the issue.

http://www.eightforums.com/bsod-crashes-debugging/17231-bsod-errors-new-windows-8-install.html
Relevancy 41.28%

Windows 7 Ultimate 64
-full retail
-system hardware is less than a year old
-intel i7 980 core @ 3.33GHz
-Gigagyte GA-X58A-UD3r Mother board

My changed from the on-board marvell raid controller to the gigabyte raid controller because my system kept crashing. After doing so, I reloaded windows seven and reinstalled all the drivers. Upon the first restart for windows updates (SP1) I got the BSOD

A:BSOD whenever windows reboots to install SP1

Problem Devices:
Code:
Marvell 91xx Config ATA Device IDE\PROCESSORMARVELL_91XX_CONFIG_____________________1.01____\6&8097DAB&0&7.0.0 The drivers for this device are not installed.
As you said, this is intentional, so probably not a concern.
Problem software:
Code:
des2svr.exe c:\program files (x86)\gigabyte\energysaver2\des2svr.exe 1648 8 200 1380 4/15/2012 8:00 PM Not Available 66.54 KB (68,136 bytes) 4/15/2012 12:57 AM
gui.exe c:\program files (x86)\gigabyte\et6\gui.exe 2856 8 200 1380 4/15/2012 8:00 PM 1.0.0.1 214.51 KB (219,656 bytes) 3/25/2008 5:21 PM
The above are known to cause crashes in Windows 7. Recommend removing them to test. Gigabyte Easy Saver - mobo power utility and Easy Tune 6.
Security Software: ??? Recommend either of the following:Microsoft Security Essentials - Free Antivirus for Windows

Good and Free system security combination.

Code:
Loading Dump File [D:\Kingston\BSODDmpFiles\thefro56\Windows_NT6_BSOD_jcgriff2\041512-28719-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (12 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0xfffff800`03c66000 PsLoadedModuleList = 0xfffff800`03ea3e50
Debug session time: Sun Apr 15 01:59:15.080 2012 (UTC - 6:00)
System Uptime: 0 days 8:04:01.531
Loading Kernel Symbols
...............................................................
................................................................
........................
Loading User Symbols
Loading unloaded module list
..............
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1E, {ffffffffc0000005, fffff80003fc0b2a, 0, 4e}

Unable to load image \SystemRoot\system32\DRIVERS\AppleCharger.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for AppleCharger.sys
*** ERROR: Module load completed but symbols could not be loaded for AppleCharger.sys
Probably caused by : AppleCharger.sys ( AppleCharger+26c0 )

Followup: MachineOwner
---------

6: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

KMODE_EXCEPTION_NOT_HANDLED (1e)
This is a very common bugcheck. Usually the exception address pinpoints
the driver/function that caused the problem. Always note this address
as well as the link date of the driver/image that contains this address.
Arguments:
Arg1: ffffffffc0000005, The exception code that was not handled
Arg2: fffff80003fc0b2a, The address that the exception occurred at
Arg3: 0000000000000000, Parameter 0 of the exception
Arg4: 000000000000004e, Parameter 1 of the exception

Debugging Details:
------------------
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

FAULTING_IP:
nt!IoBuildDeviceIoControlRequest+2a
fffff800`03fc0b2a 8a484c mov cl,byte ptr [rax+4Ch]

EXCEPTION_PARAMETER1: 0000000000000000

EXCEPTION_PARAMETER2: 000000000000004e

READ_ADDRESS: GetPointerFromAddress: unable to read from fffff80003f0e0e0
000000000000004e

ERROR_CODE: (N... Read more

http://www.sevenforums.com/bsod-help-support/224501-bsod-whenever-windows-reboots-install-sp1.html
Relevancy 41.28%

Well I have had this machine for a while Lenovo ThinkPad Tablet X and it came with Windows I upgraded the RAM to GB with cheap RAM from Ebay and it worked fine I installed Windows and very often get BSOD for Bad Pool Caller and not BSOD install Windows I every time 8.1 and try being able to write to blah blah when I googled it briefly it seemed to be a problem with RAM and a lot of people were getting it with Windows I don't have the exact error code at hand I also upgraded to an SSD so it could be that BSOD every time I try and install Windows 8.1 My Windows is up to date and all drivers are fine I installed Windows from a USB booter that I made and now my laptop doesn't boot from the same USB with Windows on it even when I go to BIOS and boot from USB it just boots from the SSD as normal So I load Windows ISO up from either USB or Desktop where I have copies but in the key and go to install Windows I have tried both overwrite and save no files and keep my files and it gets to reboots crashes with BSOD and then doesn't install Windows I sent my friend the error log and he sent this back BugCheck C c fffff e dec GetPointerFromAddress unable to read from fffff a f GetUlongFromAddress unable to read from fffff a f f GetUlongFromAddress unable to read from fffff a aa Probably caused by CI dll CI I FreeCatalogData Well this doesn't mean anything to me and if I search for CI dll I get loads of results some of which are in System so I can't just delete them I have no idea what to do and I want to fresh format this laptop so any help would be really appreciated

A:BSOD every time I try and install Windows 8.1

I also upgraded the BIOs a while back and it's the newest as far as I know, just going through and making sure all devices are on the newest drivers too but I am sure they are.

http://www.eightforums.com/bsod-crashes-debugging/35953-bsod-every-time-i-try-install-windows-8-1-a.html
Relevancy 41.28%

Hey

I have just installed windows 7 64-bit Ultimate.
I have Tested RAM (MemTest),HDD (windows),SSD(windows),GPU (Furmark)

BSOD:
1. Running only windows update, no drivers or any other software installed.
2. Running windows update and using browser (Google Chrome), AV (Microsoft Security Essentials)
3. Booted in Safe Mode with network connection.

Spec:
Asus P8Z-77-V-Pro
HDD 500GB Segate baracuda
SSD 60GB Corsair Force 3 (windows is installed here)
8GB RAM Corsair vengeance
Nvidia GTX560 ti TOP factory overclocked
Intel i5 2400s 3,7Ghz

Dump's files is attached...

Need any more details?

A:BSOD Windows 7 64-bit Clean Install

Anyone?

Got somemore BSOD's

http://www.sevenforums.com/bsod-help-support/250756-bsod-windows-7-64-bit-clean-install.html
Relevancy 41.28%

So I had this awesome post BSOD Windows Install Solved: XP and it was removed by ctrl z Touch pads on laptops FTL I tell ya I m going to make this short and sweet I m using two gb raptor HDD s connected with SATA I had windows vista ultimate x installed but I Solved: Windows XP Install BSOD didn t like it so I decided to buy windows xp MCE and here is my problem I m trying to do the install but it continues to give me the BSOD Even after I read a thread about the same issue I couldnt get pass the BSOD and the topic was locked so here I am My raid is set to auto detect but I dont have a raid setup since I m allowing xp to do this for me I did have one setup for vista but I deleted it thinking I needed to start fresh for xp am i right I boot from CD and tried to hit F but nothing happens I let it go and continue with the loading Here s where I m at now Windows Setup Setup could not determine the type of one or more mass storage devices isntalled in your system or you have chosen to manually specify an adapter Currently setup will load support for the following mass storage devices lt none gt To specify additional SCSI adapsters blah blah disk controllers blah blah blah press S I press S and have my floppy ready to install the drivers for raid from my nvidia i mobo which I created to floppy NVIDIA RAID Driver required - I do the install it takes me back to the screen and shows that I have nvidia raid driver I hit S again and install Nvidia NForce Storage Controller Now it shows me under devices the two drivers I installed or loaded My only option now is to hit enter and continue Windows freezes at Adaptec AHA- X AHA- X SCSI Host Adapater Now it s time to reset and change some bios In the bios under standard cmos features it shows that I have two drives on SATA and I go into Integrated peripherals Raid Config Raid Enable is enabled but SATA - is not I go ahead and enable SATA - which is where my HDD s are Save amp exit I go back to bios to make sure the system is reading my HDD s Under standard CMOS my SATA and are not showing Let us begin the installation of windows crap Need I remind you during boot up i get an option to enter raid utility which is F Am I suppose to create a raid there and then install windows I bypass the F and continue with the windows installation I do the same things I told you before but this time it starts to load everything When it gets to starting windows it freezes and then gives me the BSOD What am I suppose to do here I m lost and my head is about to explode I m sorry if this wasn t short but I m trying to give you as much information as possible Remember I m using an nVidia i Mobo and x Raptor GB HDD s nbsp

Relevancy 41.28%

So recently I attempted the jump from -bit to -bit in the form of Windows Vista to Windows My processor has -bit architecture It's a Q so I assumed if I did a clean install of windows and formatted Windows Vista off of my hard drive completely that I would not have an issue When I think i'm almost done with BSOD Windows I get 7, tried igdkmd64.sys a with install the installation and when windows is quot starting up quot the BSOD comes up with the error quot igdkmd sys PAGE FAULT IN NONPAGED AREA Technical information STOP x xFFFFF FE x xFFFFF A DB xFFFFF A quot Could have misplaced a zero Anyways if anyone could me know what my problem might be Specs Intel DG NB desktop motherboard GB DDR mhz Intel Core Quad Q processor If any further information is needed let me know but I do not have the exact model names for the hard drives that I am using PS ANY information will probably be helpful please I cannot find anything about this error really Thank you for your time

A:tried install Windows 7, I get a BSOD with igdkmd64.sys

  
Quote: Originally Posted by mijitarms


So recently I attempted the jump from 32-bit to 64-bit in the form of Windows Vista 32 to Windows 7 64. My processor has 64-bit architecture (It's a Q9400), so I assumed if I did a clean install of windows 7 and formatted Windows Vista off of my hard drive completely, that I would not have an issue. When (I think) i'm almost done with the installation, and when windows is "starting up", the BSOD comes up with the error:

"igdkmd64.sys

PAGE_FAULT_IN_NONPAGED_AREA

Technical information:

*** STOP: 0x00000050 (0xFFFFF88103878FE6, 0x0000000000000000, 0xFFFFF880049A51DB, 0xFFFFF880049A50000000000005)"

[Could have misplaced a zero..]

Anyways, if anyone could me know what my problem might be.

Specs:
Intel DG43NB desktop motherboard
4GB DDR2 @ 800mhz
Intel Core 2 Quad Q9400 processor

If any further information is needed let me know but I do not have the exact model names for the hard drives that I am using.

PS: ANY information will probably be helpful please I cannot find anything about this error really. Thank you for your time!


do you by chance have the original dmp file. Located in c:\windows\minidump.
zip them and upload to us using the attachment icon (see pic)

Ken J++

http://www.sevenforums.com/installation-setup/41694-tried-install-windows-7-i-get-bsod-igdkmd64-sys.html
Relevancy 41.28%

Hi I'm using two gb raptor HDD's connected with SATA I had windows vista http en wikipedia org wiki Windows Vista ultimate x Windows install 2005 BSOD XP MCE During http en wikipedia org wiki x - installed but I didn't like it so I decided to buy windows xp MCE and Windows XP MCE 2005 BSOD During install here is my problem I'm trying to do the install but it continues to give me the BSOD http en wikipedia org wiki Blue Screen of Death Even after I read a thread Windows XP MCE 2005 BSOD During install about the same issue I couldnt get pass the BSOD and the topic was locked so here I am My raid is set to auto detect but I dont have a raid setup since I'm allowing xp to do this for me I did have one setup for vista but I deleted it thinking I needed to start fresh for xp am i right I boot from CD and tried to hit F but nothing happens I let it go and continue with the loading Here's where I'm at now Windows Setup Setup could not determine the type of one or more mass storage devices isntalled in your system or you have chosen to manually specify an adapter Currently setup will load support for the following mass storage devices lt none gt To specify additional SCSI adapsters blah blah disk controllers blah blah blah press S I press S and have my floppy ready to install the drivers for raid from my nvidia i mobo which I created to floppy NVIDIA RAID Driver required - I do the install it takes me back to the screen and shows that I have nvidia raid driver I hit S again and install Nvidia NForce Storage Controller Now it shows me under devices the two drivers I installed or loaded My only option now is to hit enter and continue Windows freezes at Adaptec AHA- X AHA- X SCSI Host Adapater Now it's time to reset and change some bios In the bios under standard cmos features it shows that I have two drives on SATA and I go into Integrated peripherals Raid Config Raid Enable is enabled but SATA - is not I go ahead and enable SATA - which is where my HDD's are Save amp exit I go back to bios to make sure the system is reading my HDD's Under standard CMOS my SATA and are not showing Let us begin the installation of windows crap Need I remind you during boot up i get an option to enter raid utility which is F Am I suppose to create a raid there and then install windows I bypass the F and continue with the windows installation I do the same things I told you before but this time it starts to load everything When it gets to starting windows it freezes and then gives me the BSOD What am I suppose to do here I'm lost and my head is about to explode I'm sorry if this wasn't short but I'm trying to give you as much information as possible Remember I'm using an nVidia i Mobo and x Raptor GB HDD's

http://www.techsupportforum.com/forums/f10/windows-xp-mce-2005-bsod-during-install-270244.html
Relevancy 41.28%

Hi: I hope you can help me solve my blue screen problem. My computer is an HP Pavilion a6242n which had a OEM Windows Vista installed. It has a AMD Athlon 64 x2 processor, 3072 mb Memory, 320 g Harddrive, dvd burner, Nvidia Geforce 6150 SE graphics card. The computer is 2 years old

I did a clean install of Windows 7 Ultimate 64 bit that was a retail purchase and then used easy transfer to reinstall my data.

I am attaching the Windows_NT6_BSOD_jcgriff2 folder and the Perfmon HTML.

Hope you can help me please figure this out.

A:BSOD After Clean Install of Windows 7

Hi,
Your single dump have error code 0x19_3 = indicates pool header corruption.

Reinstall .Net Framework because mscorsvw.exe was involved on the crash.

Code:
PROCESS_NAME: mscorsvw.exe
Upgrade your symantec antivirus to the latest version, or uninstall it.
I would recommend to use MSE for troubleshooting purpose.

These drivers need to do update:

Code:
Nvidia chipset driver=
nvstor nvstor.sys Tue May 19 23:45:37 2009
nvlddmkm nvlddmkm.sys Thu May 14 13:48:07 2009
nvm62x64.sys Fri Oct 17 14:01:06 2008

Conexant SoftK56 Modem Driver=
VSTBS26 VSTBS26.SYS Wed Oct 15 17:54:06 2008
VSTCNXT6 VSTCNXT6.SYS Wed Oct 15 17:52:22 2008
VSTDPV6 VSTDPV6.SYS Wed Oct 15 17:57:45 2008
If the problem persist, enable driver verifier and use windows normally. Then if you get BSOD attach the new file here.
Driver Verifier - Enable and Disable

Log

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 19, {3, fffffa80060fb640, 0, fffffa80060fb640}

Probably caused by : Pool_Corruption ( nt!ExDeferredFreePool+ca0 )

Followup: Pool_corruption
---------

1: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

BAD_POOL_HEADER (19)
The pool is already corrupt at the time of the current request.
This may or may not be due to the caller.
The internal pool links must be walked to figure out a possible cause of
the problem, and then special pool applied to the suspect tags or the driver
verifier to a suspect driver.
Arguments:
Arg1: 0000000000000003, the pool freelist is corrupt.
Arg2: fffffa80060fb640, the pool entry being checked.
Arg3: 0000000000000000, the read back flink freelist value (should be the same as 2).
Arg4: fffffa80060fb640, the read back blink freelist value (should be the same as 2).

Debugging Details:
------------------
BUGCHECK_STR: 0x19_3

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

PROCESS_NAME: mscorsvw.exe

CURRENT_IRQL: 2

LAST_CONTROL_TRANSFER: from fffff800029bb130 to fffff80002888740

STACK_TEXT:
fffff880`06625998 fffff800`029bb130 : 00000000`00000019 00000000`00000003 fffffa80`060fb640 00000000`00000000 : nt!KeBugCheckEx
fffff880`066259a0 fffff800`029bd4c1 : ffffffff`fffffffe fffffa80`03a2ee60 00000000`00000000 fffff8a0`08d5c7b0 : nt!ExDeferredFreePool+0xca0
fffff880`06625a30 fffff800`0288d8bc : fffffa80`03a2eea0 00000000`00000000 fffffa80`52777445 fffffa80`02385350 : nt!ExFreePoolWithTag+0x411
fffff880`06625ae0 fffff800`02b9e514 : fffffa80`02a14900 00000000`00000000 fffffa80`02ed27e0 00000000`00000000 : nt!ObfDereferenceObject+0xdc
fffff880`06625b40 fffff800`02b9e414 : 00000000`000001ac fffffa80`02a14900 fffff8a0`08d5c7b0 00000000`000001ac : nt!ObpCloseHandleTableEntry+0xc4
fffff880`06625bd0 fffff800`02887993 : fffffa80`02ed27e0 fffff880`06625ca0 00000000`00000001 00000000`00000001 : nt!ObpCloseHandle+0x94
fffff880`06625c20 00000000`76f0fe4a : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
00000000`0012f6b8 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x76f0fe4a
STACK_COMMAND: kb

FOLLOWUP_IP:
nt!ExDeferredFreePool+ca0
fffff800`029bb130 cc int 3

SYMBOL_STACK_INDEX: 1

SYM... Read more

http://www.sevenforums.com/bsod-help-support/121784-bsod-after-clean-install-windows-7-a.html
Relevancy 41.28%

Dear members this is about PCs consisting of Asus P X PRO BIOS Intel i - k Samsung SSD system software Samsung H UI data AMD FirePro V Windows Professional bit The PCs have been self-built in and ran simulation software nearly until April after which they were not needed and switched off mains disconnected After switching two of them back on in November Windows updated - and soon a BSOD-fest ensued even in safe mode no dump files could be written no software could be installed to monitor or check things only the event viewer filled up by the minute so I switched the PCs back off Instead of unskilled tinkering I decided to update their BIOS which worked and then rather install Windows anew formatting the SSD in the process Now just before the installation finishes each PCs freezes with quot The system encountered an uncorrectable hardware error quot and quot 7 clean during BSOD install Windows right after or STOP x quot How should one go about this I am absolutely clueless Has the processor gone bad on each machine in their eight months sleep No hardware has been added removed I opened the case and checked if something became BSOD during or right after Windows 7 clean install loose the PC have not been moved shaken or BSOD during or right after Windows 7 clean install kicked the environment is dust-filtered Thanks for any hint

A:BSOD during or right after Windows 7 clean install

Bump : )

The near-instand BSODing makes it not possible to install anything, no functional OS or one of the testing utilities, suggested in "regular BSOD" threads here : (

http://www.sevenforums.com/bsod-help-support/322036-bsod-during-right-after-windows-7-clean-install.html
Relevancy 41.28%

When I try to install Windows 7 64bit I always get a BSOD about memory. I don?t know what else to say?it happens every time right after the little windows start to fly across the screen after the file have loaded. I?ve attached the dumps and system health file. Thanks

A:BSOD During Windows 7 64 bit Install everytime

  
Quote: Originally Posted by Brian Alton


When I try to install Windows 7 64bit I always get a BSOD about memory. I don?t know what else to say?it happens every time right after the little windows start to fly across the screen after the file have loaded. I?ve attached the dumps and system health file. Thanks


Sorry but no DMP file enclosed please use these to find and upload them
We really need the actual DMP file.

If you wish to have others assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder. The procedure:

* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Start your own thread in the "Crashes and Debugging" section of the forum and attach the ZIP archive to your post using the "paperclip" (file attachments) button.
* Briefly describe the problem history and circumstances in the same post. Somebody will attend to your query as soon as possible.

http://www.sevenforums.com/bsod-help-support/108790-bsod-during-windows-7-64-bit-install-everytime.html
Relevancy 41.28%

I have been getting a random BSOD on a fresh Windows 8 install. It doesn't seem to happen at any given time. Sometimes its right after startup and sometimes in the middle of the night when nothing is happening. I have attached my dumps if anyone can help read them. I have tried to look at them myself but I am getting a symbols error. I appreciate the help, Thanks!

A:Windows 8 BSOD after fresh install

Some of your mini-dumps are pointing towards the file: e1c63x64.sys which is your Intel(R) Gigabit Adapter NDIS 6.x driver file. Please update this to Windows 8 64bit version: Driver Reference Table

I have also found some out-of-date drivers that you should update or remove/un-install if un-needed:

AsUpIO.sys - ASUS hardware monitoring software related:http://www.carrona.org/drivers/search.php?id=AsUpIO.sys (please un-install all ASUS utilities via the control panel/un-install programs, known BSOD maker in Windows 8)
teamviewervpn.sys - TeamViewerVPN Network Adapter: Driver Reference Table (please un-install Teamviewer and re-install the latest version if you must use it)
vstor2-mntapi10-shared.sys - VMware Virtual Storage Volume Driver: Driver Reference Table (please un-intsall VMWare and install the latest version if you must use it)

Please update anything to Windows 8 64bit versions from your motherboard manufacturers website. This should include your Intel(R) Gigabit Ethernet Driver LAN driver. Your BIOS version is 3203 and the latest appears to be 3305, you might want to update as a last resort but please if you do follow manufacturers precautions as any error might render your system inoperable:

ASUSTeK Computer Inc. -Support- Drivers and Download P9X79 PRO

Please ensure you have downloaded all the Windows 8 updates until you can install no more.

-cheers

http://www.eightforums.com/bsod-crashes-debugging/18586-windows-8-bsod-after-fresh-install.html
Relevancy 41.28%

Hello after Starting BSOD Windows. (install) first I would like to ask for excuses for my English the Yahoo Babel Fish - Tradutor de textos e p ginas da web will help me now the BIG problem im trying install windows x on my computer but he load files and after Starting Windows in first time get a BSOD x x x D x x i try - remove all usb mouse and webcam - Change DVI to VGA - burn DVD x and x - download others versions and but always give BSOD my computer is P bits MB ASUS P vd -x updated to Working GB Memory kingstone and Corsair VGA Inno d GF GT DVD Sata GSA-H N i tried update windows Vista to Windows and BSOD again quot News quot isnt my BSOD after Starting Windows. (install) VGA i try other isnt my DVD Drive i try other it only can be the Motherboard now i cant use Windows somebody know anythink please sorry again for my english thanks

A:BSOD after Starting Windows. (install)

I've been having the same thing on my main pc since a recent windows update, I then wiped my pc and did a clean install of build 7077 it did the same, im going to try 7100 soon (works fine on my laptop).

Thing is vista and xp work fine and I have a strong suspicion that its the nvidia drivers windows is installing.

http://www.sevenforums.com/installation-setup/7800-bsod-after-starting-windows-install.html
Relevancy 41.28%

Hello A few days ago I ran into the BSOD after clicking a Windows Update on my Windows XP Media Center edition The specific error message is STOP x E xC D x xF ED xF ED I contacted DELL and I already paid to have a conversation with a hardware technician and to receive the original startup CDs This includes a year hardware warranty i ran a hardware diagnostic after hitting F [SOLVED] Windows Install After BSOD during startup Drive SATA- ON Drive SATA- OFF Drive PATA- ON Drive PATA- OFF Now Dell wants to charge to get a software warranty where they back up my files troubleshoot etc I cannot afford to do this I just paid and my computer is still not working properly so I'm trying to do this on my own Can somebody please help I cannot get [SOLVED] BSOD After Windows Install pas this blue screen and I can't even log on in Safe Mode I do have all of the original CDs and I'm really just trying to get back to a restore point BEFORE downloading these updates I'd really like to avoid wiping the computer clean completely because I have my whole life on there I feel like I'm getting ripped off and I just don't know how to proceed

A:[SOLVED] BSOD After Windows Install

and welcome to the Forum

What model is this Dell? . . Are you useing a USB keyboard and/or mouse? Any other USB devices connected?

http://www.techsupportforum.com/forums/f10/solved-bsod-after-windows-install-461673.html
Relevancy 41.28%

Hi Thanks in advance for any help you can provide I've been slowly building up a new system over the last few and with BSOD Install Hardware Windows new months and the final piece was adding a second PNY Nvidia GTS for a dual SLI rig Since installing the new hardware and drivers I've had some issues with an occasional sudden reboot of the PC which I later realized is Win 's new way of dropping a BSOD In the process of all of this I've been installing and uninstalling software like a madman So this week I decided to do a full reinstall of Windows No luck I've tried to eliminate any hardware overheating issues my cards stay below C The reboot crashes have come BSOD with new Windows Install and Hardware when I've been using some pretty low-demand picture editing or when I've been making adjustments in the Nvidia control panel I am hoping someone here can at least point me in the right direction if there is an obvious software issue at play or if I ended up with a defective piece of hardware Many thanks Windows Professional bit Installed this week Asus M N TD EVO Motherboard AMD Phenom II X CPU w GB RAM DDR - x PNY Nvidia GeForce GTS graphic adapters driver ver W OCZ Power Supply NO system overclocking MiniDump Attached

A:BSOD with new Windows Install and Hardware

Dump blames your nVidia Display Drivers, please do the followings...
- Boot into safe mode with networking
- Uninstall the nVidia Drivers (using Device Manager)
- Use driver sweeper to remove leftover nVidia display driver files Guru3D - Driver Sweeper
- Install the latest drivers NVIDIA DRIVERS 266.58 WHQL
- Reboot into normal mode


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 116, {fffffa80076e54e0, fffff88010047354, 0, 2}

Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+156354 )

Followup: MachineOwner
---------

http://www.sevenforums.com/bsod-help-support/145089-bsod-new-windows-install-hardware.html
Relevancy 41.28%

Hi everyone Im attempting to install Windows x edition onto my Windows using the quot keep install, BSoD 8 Windows page_fault_by_nonpaged_area after files settings and programs quot feature I have tried installs and i keep getting BSoD On my third attempt i was able to note down the error code which was quot PAGE FAULT BY NONPAGED AREA quot The install seems to go fine it the getting devices ready goes up to the getting ready goes to The BSoD seems to happen after its last automatic reboot After the BSoD the Windows 8 BSoD after install, page_fault_by_nonpaged_area computer restarts and then restores my previous edition of windows Windows I have followed the instructions and uploaded a BSoD log I have also uploaded another zip file that has the logs from the quot C WINDOWS BT Sources quot Panther and logs and Windows 8 BSoD after install, page_fault_by_nonpaged_area memdump from the Rollback folder Thank you in advance Edi i forgot to mention that Windows 8 BSoD after install, page_fault_by_nonpaged_area before the install the logmein was uninstalled and the logmein folder in program files x was deleted

A:Windows 8 BSoD after install, page_fault_by_nonpaged_area

There are no minidump and I've never looked at a memdump file before, but here are the results for it.


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 50, {fffff8037447bd40, 0, fffff88003720293, 2}

*** WARNING: Unable to verify timestamp for RapportPG64.sys
*** ERROR: Module load completed but symbols could not be loaded for RapportPG64.sys

Could not read faulting driver name
Probably caused by : RapportPG64.sys ( RapportPG64+4293 )

Followup: MachineOwner
---------

1: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced. This cannot be protected by try-except,
it must be protected by a Probe. Typically the address is just plain bad or it
is pointing at freed memory.
Arguments:
Arg1: fffff8037447bd40, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffff88003720293, If non-zero, the instruction address which referenced the bad memory
address.
Arg4: 0000000000000002, (reserved)

Debugging Details:
------------------
Could not read faulting driver name

READ_ADDRESS: GetPointerFromAddress: unable to read from fffff80274758168
GetUlongFromAddress: unable to read from fffff802747581f8
fffff8037447bd40 Nonpaged pool

FAULTING_IP:
RapportPG64+4293
fffff880`03720293 8b07 mov eax,dword ptr [rdi]

MM_INTERNAL_CODE: 2

DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

BUGCHECK_STR: AV

PROCESS_NAME: System

CURRENT_IRQL: 0

TRAP_FRAME: fffff880009a8dc0 -- (.trap 0xfffff880009a8dc0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=fffff8027447dde0 rbx=0000000000000000 rcx=00000000ffffdf42
rdx=0000000000000000 rsi=0000000000000000 rdi=0000000000000000
rip=fffff88003720293 rsp=fffff880009a8f50 rbp=fffff880009a9150
r8=c5000160d4800001 r9=fffff8a0000054f0 r10=fffff8027484c3e0
r11=fffff880009a8f98 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei ng nz na po nc
RapportPG64+0x4293:
fffff880`03720293 8b07 mov eax,dword ptr [rdi] ds:00000000`00000000=????????
Resetting default scope

LAST_CONTROL_TRANSFER: from fffff802745eb024 to fffff8027447d040

STACK_TEXT:
fffff880`009a8bd8 fffff802`745eb024 : 00000000`00000050 fffff803`7447bd40 00000000`00000000 fffff880`009a8dc0 : nt!KeBugCheckEx
fffff880`009a8be0 fffff802`744b7b6f : 00000000`00000000 fffff803`7447bd40 fffffa80`036ed3c0 fffff802`747ce541 : nt! ?? ::FNODOBFM::`string'+0x32e9e
fffff880`009a8c80 fffff802`7447aaee : 00000000`00000000 fffffa80`053305c0 00000000`00000000 fffff880`009a8dc0 : nt!MmAccessFault+0x54f
fffff880`009a8dc0 fffff880`03720293 : fffff8a0`00000000 00000000`00000000 fffff880`0372b290 fffff880`009a8fa4 : nt!KiPageFault+0x16e
fffff880`009a8f50 fffff8a0`00000000 : 00000000`00000000 fffff880`0372b290 fffff880`009a8fa4 fffff803`7447bd40 : RapportPG64+0x4293
fffff880`009a8f58 00000000`00000000 : fffff880`0372b290 fffff880`009a8fa4 fffff803`7447bd40 fffff880`03721ff0 : 0xfffff8a0`00000000
STACK_COMMAND: kb

FOLLOWUP_IP:
RapportPG64+4293
fffff880`03720293 8b07 mov eax,dword ptr [rdi]

SYMBOL_STACK_INDEX: 4

SYMBO... Read more

http://www.eightforums.com/bsod-crashes-debugging/12346-windows-8-bsod-after-install-page_fault_by_nonpaged_area.html
Relevancy 41.28%

Hey guys,
I built my PC from all new parts about 3-4 months ago, but from the get go it would intermittently blue screen, it settled down a month or two later but not sure why. Two days ago I wiped and formatted my drive and did a clean install of 7 as I was having unrelated issues I couldn't resolve. But now the blue screens are back. I thought it might be mobo driver issues but I finished updating the drivers and it's still happening.
System specs:
Windows 7 Professional 64x
Gigabyte ga-870fxa-ud5
AMD Phenom x6
AMD Radeon HD6870 1gb
two 4g G-Skill Ripjaw f3-12800cl9d-8gbxl RAM

Attached is the minidump and health report.
Thanks for any help!

A:BSOD on fresh install Windows 7

> Your crash was related to AODDriver2.sys AMD OverDrive Service Driver from Advanced Micro Devices.
Remove > at least to test.

> Please run the update readiness tool and then update to SP-1

Ensure you install the correct 64 or 32 bit option for your system)
Download the System Update Readiness Tool (64bit)
Download the System Update Readiness Tool (32bit)

Now update to SP-1

Learn how to install Windows 7 Service Pack 1 (SP1)

> I suggest you download the free version of Malwarebytes.
Update it immediately.
Do a full system scan
Let us know the results at the end.

Malwarebytes : Download free malware, virus and spyware tools to get your computer back in shape!

http://www.sevenforums.com/bsod-help-support/214809-bsod-fresh-install-windows-7-a.html
Relevancy 41.28%

I have been experiencing a BSOD on my fresh install of windows 7. I ran the upgrade adviser before upgrading and it said my hardware was 100% compatible. Here is the info:
-32bit windows 7 pro
-The original OS was XP home
-Retail version of 7 pro
-2.5 years since the date of purchase today at 6:05 PM
-I installed 7 a week ago
-It is a windows 7 and Ubuntu dual boot.

Here is the crash message text:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033

Additional information about the problem:
BCCode: a
BCP1: 10000000
BCP2: 00000002
BCP3: 00000001
BCP4: 81897400
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\090711-61791-01.dmp
C:\Users\Jack\AppData\Local\Temp\WER-78905-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

And .zip is attached.

A:BSOD Fresh install of windows 7 pro

I would test you ram and cpu:


Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Administrator\Downloads\BSOD stuff\Windows_NT6_BSOD_jcgriff2\090111-39343-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*F:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17514.x86fre.win7sp1_rtm.101119-1850
Machine Name:
Kernel base = 0x8184d000 PsLoadedModuleList = 0x81997850
Debug session time: Thu Sep 1 18:12:12.608 2011 (UTC - 6:00)
System Uptime: 0 days 0:01:58.201
Loading Kernel Symbols
...............................................................
................................................................
................
Loading User Symbols
Loading unloaded module list
......
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {10000000, 2, 1, 818c5400}

Probably caused by : hardware

Followup: MachineOwner
---------
*** Possible invalid call from 818eadc2 ( nt!MiInsertPageInFreeOrZeroedList+0x1e7 )
*** Expected target 818c53d0 ( nt!KeAcquireInStackQueuedSpinLockAtDpcLevel+0x0 )

1: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: 10000000, memory referenced
Arg2: 00000002, IRQL
Arg3: 00000001, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: 818c5400, address which referenced memory

Debugging Details:
------------------
WRITE_ADDRESS: GetPointerFromAddress: unable to read from 819b7718
Unable to read MiSystemVaType memory at 819971a0
10000000

CURRENT_IRQL: 2

FAULTING_IP:
nt!KeAcquireQueuedSpinLockAtDpcLevel+20
818c5400 8908 mov dword ptr [eax],ecx

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

BUGCHECK_STR: 0xA

PROCESS_NAME: explorer.exe

TRAP_FRAME: 903f1ef8 -- (.trap 0xffffffff903f1ef8)
ErrCode = 00000002
eax=10000000 ebx=0000030c ecx=903f1f8c edx=830f1d9d esi=82ad1644 edi=830f1d8c
eip=818c5400 esp=903f1f6c ebp=903f1f98 iopl=0 nv up ei ng nz na po nc
cs=0008 ss=0010 ds=0023 es=0023 fs=0030 gs=0000 efl=00010282
nt!KeAcquireQueuedSpinLockAtDpcLevel+0x20:
818c5400 8908 mov dword ptr [eax],ecx ds:0023:10000000=????????
Resetting default scope

LAST_CONTROL_TRANSFER: from 818eadc7 to 818c5400

POSSIBLE_INVALID_CONTROL_TRANSFER: from 818eadc2 to 818c53d0

STACK_TEXT:
903f1f68 818eadc7 82b3dc84 82ad1644 82ad164c nt!KeAcquireQueuedSpinLockAtDpcLevel+0x20
903f1f98 818e0644 82b3dc84 82ad1644 82ad164c nt!MiInsertPageInFreeOrZeroedList+0x1ec
903f1fd8 818f2728 00001b8b c07f00f0 00000057 nt!MiPfnShareCountI... Read more

http://www.sevenforums.com/bsod-help-support/185292-bsod-fresh-install-windows-7-pro.html
Relevancy 41.28%

Random different error code BSOD's cant figure out the problem. Windows 10 newly installed on new mobo cpu and RAM. Please help!!!

See attachment

Thanks!

A:BSOD random with new windows 10 install.

Please make sure to get a genuine activation and update your installation

Code:
<LicensingStatus>SL_LICENSING_STATUS_NOTIFICATION</LicensingStatus>
Hotfix(s): N/A
Please run CPU-Z | Softwares | CPUID, open it and make screenshots of the following tabs
CPUMainboardMemorySPD*Graphics
*SPD shows the details of each module, you can show the details by choosing different slots in the left upper corner.
Please make screenshots of each module.

Please post each screenshot in your next reply/replies.
Most of the crashes are memory related (memory, vram, hard drive, page file) crashes, this usually refers to the memory, however I noticed in a few dumps some references to file system drivers so I would like you to run a memory test and hard drive tests.


Diagnostic Test

 RAM TEST

Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums


   Note


MemTest86+ needs to be run for at least 8 complete passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.
Addition:
If errors show up you can stop the test, remove all sticks but 1 and test this single stick in each slot for 8 passes or until errors show, switch sticks and repeat.
If errors show up and you see them a lot later, no problem, the errors don't affect the test.


Diagnostics Test

 HDD TEST

Run SeaTools to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use - Windows 7 Help Forums
Run following tests
Short Drive Self TestShort genericLong generic
If the short generic fails, no need for the long generic.

   Note
Do not run SeaTools on an SSD as the results will be invalid.

Run chkdsk
Disk Check - Windows 7 Help Forums

Run HDTune to
scan for errors, no quick scan but full scancheck the health,benchmark.
It may take some time, but please take the time you need to perform it properly.
Let me know what the results are
of the error scan,make a screenshot of the health of every hard drive and post the screenshots,post screenshots with the benchmark of the
transfer rate,access time,burst rate,cpu usage.

Code:
3: kd> k
# Child-SP RetAddr Call Site
00 ffffd000`21d27088 fffff800`057f61c8 nt!KeBugCheckEx
01 ffffd000`21d27090 fffff800`0572ae9b nt! ?? ::FNODOBFM::`string'+0x178c8
02 ffffd000`21d27150 fffff800`056bd392 nt!MiUnlinkStandbyBatch+0x14b
03 ffffd000`21d271a0 fffff800`056bc0be nt!MmCheckCachedPageStates+0x822
04 ffffd000`21d27340 fffff800`05a58ebf nt!CcFetchDataForRead+0x8e
05 ffffd000`21d273a0 fffff800`056bbe8e nt!CcMapAndCopyFromCache+0xcf
06 ffffd000`21d27440 fffff800`d52cc447 nt!CcCopyReadEx+0xfe
07 ffffd000`21d274b0 fffff800`d47f8124 NTFS!NtfsCopyReadA+0x217
08 ffffd000`21d27740 fffff800`d47f566d FLTMGR!FltpPerformFastIoCall+0xc4
09 ffffd000`21d277a0 fffff800`d4825f09 FLTMGR!FltpPassThroughFastIo+0xbd
0a ffffd000`21d27800 fffff800`05a903f3 FLTMGR!FltpFastIoRead+0x159
0b ffffd000`21d278a0 fffff800`057da7a3 nt!NtReadFile+0x423
0c ffffd000`21d27990 00000000`5a2721bc nt!KiSystemServiceCopyEnd+0x13
0d 00000000`00ddee78 00000000`00000000 0x5a2721bc
Please fill in your system specsPlease follow this tutorial and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely.How to fill in your system specs:

http://www.tenforums.com/bsod-crashes-debugging/43462-bsod-random-new-windows-10-install.html
Relevancy 41.28%

Hi Guys My friend recently installed windows ultimate bit on his laptop everything went perfect and install bit 7 receive windows Can't 32 - BSOD is running fine He then decided to also upgrade his desktop he had successfully installed it and was able to get to the log in screen without any problems once typing in his password and logging into to windows the screen would flicker and go black and blue and sometimes the pc would shut itself off The error which we could make out before the screen went off was 'Kernel driver has stopEd responding ' something to that effect I can't remember the exact message But we managed to figure it Can't install windows 7 32 bit - receive BSOD was an issue with the nvidia drivers as it seems to be a wide spread problem with nvidia GeForce cards my friend has a gt Now since then we decided to format the hard drive and perform a fresh install of windows Now this wer things get interesting We booted from CD and ran the windows installation when the screen comes up to ask which partition hard drive you want to install on we formatted the hard drive on this screen and then tried to perform an installation the installation started but stopped at some point and we received a blue screen now weneva we attempt to boot from cd the windows installations files are loaded and the windows starting logo is displayed but then we receive the BSOD I cannot provide you with any dump files as there is not operating system but I have taken a picture of the BSOD that we receiving System specs Biostar Tforce PT Nvidia GeForce GT mb gb Ram Intel Core Duo ghz

A:Can't install windows 7 32 bit - receive BSOD

Attachment 210446

Hopefully u guys can make out that image

http://www.sevenforums.com/bsod-help-support/228351-cant-install-windows-7-32-bit-receive-bsod.html
Relevancy 41.28%

I know this has been posted here and all over the internet in the past and that's where install 0x0000007B after BSOD windows my problem lies actually i can't find a solution that works My problem After going through the installation of windows XP Pro SP on a SATA HDD while using the Latest Nvidia SATA controller during installation pressing F etc windows installs fine i have an nForce motherboard After the install when windows is booting up screen with the logo and a bar below it it loads for about 0x0000007B BSOD after windows install seconds then gives me a BSOD with the x B error and restarts I've been looking non-stop for a fix for the past hours for a solution but couldn't find anybody who has the same problem as me actually I've tried re-installing from scratch I've tried repairing windows Both of those methods don't work i really can't think of what else it could be I've also tried to toggle 0x0000007B BSOD after windows install the RAM but that doesn't do anything I've browsed the Microsoft databases about the BSOD and such but haven't found a solution that works my Specs EVGA i Ultra SLI Mobo Seagate Baracude GB HDD OCZ GB DDR RAM EVGA GTX Video Card Intel Q CPU Thanks in advance to anybody who can help

A:0x0000007B BSOD after windows install

Hello and Welcome to TSF

Has windows ever ran good on this pc before? Is the BIOS seeing the complete 4GB of ram? Are you using a 64bit OS?

http://support.microsoft.com/kb/316401/

http://www.techsupportforum.com/forums/f10/0x0000007b-bsod-after-windows-install-259462.html
Relevancy 41.28%

Hello guys ive been having issues for quite a while now and windows install BSOD fresh after of ive been trying to solve this matter but so far ive only failed Ive ran memtest a and i BSOD after fresh install of windows found several million errors So i scanned through and ramslot to try to determine which ram was giving the errors this only resulted in of my ram had only error I found this weird so i thought it might be the DIMM thats corrupted So now i BSOD after fresh install of windows removed of my rams and i BSOD after fresh install of windows only run with which passed the test Still i get unexpected shutdowns aka BSOD Ive tried to remove my SSD and only use my HDD back and forth changing to IDE inside BIOS but with no good results at all Ive also tried to change my PSU to a different brand but all volts seems ok I also reinstalled windows with USB CD from HDD yeah you name it different versions etc i even tried to install Windows but with the same result This all actually just started out of the blue i have no clue how but i didnt install anything all of the sudden i started having connection problems which resulted in BSOD Specs Asus P X PRO LGA- Intel I- X ghz six core gb ram Corsair Vengeance mhz EVGA Geforce GTX gb ram W Cooler Master M Silent Pro PSU GB Crucial SSD TB HDD Samsung Im kind of clueless All kind of help will be appreciated Thank you Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode BCP FFFFF A C BCP BCP FFFFF D E BCP OS Version Service Pack Product Files that help describe the problem C Windows Minidump - - dmp C Users Computer AppData Local Temp WER- - sysdata xml Read our privacy statement online http go microsoft com fwlink li cid x If the online privacy statement is not available please read our privacy statement offline C Windows system en-US erofflps txt Files Download - - dmp from Sendspace com - send big files the easy way - gt - - dmp Download WER- - sysdata xml from Sendspace com - send big files the easy way - gt WER- - sysdata xml

A:BSOD after fresh install of windows

Run memtest from hcidesign along with your other programs.

http://www.sevenforums.com/bsod-help-support/266317-bsod-after-fresh-install-windows.html
Relevancy 41.28%

Hi, I have been having this problem for a while, and I am looking for a fix.
When I install windows on to my computer using the disk, it will install fine. The problems start when I reboot windows after installing. The starting windows screen loads for about a minute, then it blue screens for about half a second, then reboots. When I use a Linux live cd to look at my files, everything in system32 folder is gone. I have wiped my hard drive twice already. I have tried using diskpart from the live cd, but when I run it I sometimes get a message about no fixed drives being found. I cannot boot in safe mode either.

A:BSOD Every time I try to install windows

Two possible causes for this problem that spring to mind.
 
1. The Windows install disk could be faulty or damaged.
 
2. The hard drive could be faulty or failing.
 
I hope this helps.

http://www.bleepingcomputer.com/forums/t/570547/bsod-every-time-i-try-to-install-windows/
Relevancy 41.28%

So last night I decide to do a clean install to Windows 8.1, I have't installed much except for drivers, Google Chrome, Skype, and League of Legends. And I have had no problems out of it all day with playing LoL while on Skype. But i just got this BSOD not too long after one of my LoL games ended.

DRIVER_IRQL_NOT_LESS_OR_EQUAL (tcpip.sys)

This is my 3rd Forum I know but I don't understand why I am so unlucky to be getting this.

A:BSOD after clean Windows 8.1 install

Bad idea to make a new thread. Please keep issue in one thread.

You have to do that MSI link workaround I gave you.

http://www.eightforums.com/bsod-crashes-debugging/39968-bsod-after-clean-windows-8-1-install.html
Relevancy 41.28%

I am trying to install windows 7 Ultimate 32bit on my computer and it fails. I had some trouble getting the installation disk to boot. i kept getting a BSOD error 0x0000000a. I was able to get around this error by removing one stick of ram (i have 3 x 1GB kingston DDR PC3200).
I selected the 40GB IDE drive to install windows to (couldn't get it to recognize my SATA controller). I was able to format the drive and copy file. Then the computer rebooted. When windows tries to boot I get the BSOD and then the computer reboots. I'm not able to see what is causing the error. if I select safe mode boot it boots up to the installer. there I get an error can't continue setup in safe mode please reboot.

A:Windows 7 install fails BSOD

How to ask for help with a BSOD problem

http://www.sevenforums.com/installation-setup/92592-windows-7-install-fails-bsod.html
Relevancy 41.28%

Hello everyone Windows BSoD after install 7 fresh New member to the forums here and I was able to be pretty ninja-like when it came to getting information required to make a post in this forum Bought a new computer weeks ago came in days ago Been having trouble with it since Usually I'm the quot Mr Fix-it quot when it comes to PC's but I've never messed around with any debugging tools so I need some assistance please any help is greatly appreciated I've tried all the troubleshooting you can possibly do when trying to diagnose a blue screen of death Tried both BSoD after fresh Windows 7 install RAM sticks separately took the video card out and used on-board video I even tried both RAM sticks with on-board video separately Unplugged the DVD-ROM no avail I called ASRock and got a technician who I could barely understand but was telling me something about quot XMP quot I didn't see the XMP option under the DRAM configuration even if my sticks don't support it wouldn't the option still be there I think he has my motherboard confused with another one He told me to either replace the RAM with new RAM or send the motherboard back in and exchange it I came here to see what the BSoD DMP files REALLY have to say the problem is so I can solve it once and for all I didn't pay for new hardware to let it sit here and collect dust I appreciate any help you guys can offer SPECS Nothing is OC'd except the GPU it was OC'd straight from the factory MOBO ASRock Z Extreme Gen P latest BIOS update CPU Intel Core i Sandy Bridge ghz RAM GSkill RIPJAWS x gb DDR GPU MSI GTX-TI Twin Frozr ii gb PSU Corsair TX W HDD TB Samsung SATAII gb sec DVD-ROM ASUS SATA DVD-ROM OS Windows Ultimate bit RETAIL

Relevancy 41.28%

Hi i've been getting BSOD quite a lot I decided to do a Windows update repair to try and fix it But im still getting them Sfc scannow shows nothing wrong now - it found stuff before the update and couldnt fix some it it - think mostly to do the the bloatware i removed from when i first got it Heres a couple of things i managed to get before they dissapered think these may be form before the repair install not sure Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode BCP BCP FFFFF D BCP FFFFF D BCP FFFFFA OS Version Service Pack Product Problem install windows still doing repair after BSOD signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode b BCP C BCP FFFFF AE BCP FFFFF D BCP BSOD still after doing windows repair install OS Version Service Pack Product The BSOD only stays on screen for a few seconds but i managed to see BAD POOL HEADER in one of them When the laptop woke up aftre the repair install the graphics drivers were meseed up - it said they were the old ones but the Catalyst Control Centre didnt work I tried getting the new ones back on for BSOD still after doing windows repair install about hours - in the end i gave up and put the old ones back on BSOD still after doing windows repair install and manually updated just the driver from the device manager - the old CCC is still on here and works Can you decode this computer drivel and tell me whats wrong with it please That SF diognostic tool had some sort of error NTF framework or something like that but there alot of logs in the zip so hopfully its all there Cheers

A:BSOD still after doing windows repair install

Welcome to SF Orgo .

You uploaded two bug checks, seemingly, showing different stories although they can be related.
One of them shows Avast and Comodo Firewall causing issues and the other
appears to be due to an outdated driver.


Code:
BAD_POOL_HEADER (19)
The pool is already corrupt at the time of the current request.
This may or may not be due to the caller.
The internal pool links must be walked to figure out a possible cause of
the problem, and then special pool applied to the suspect tags or the driver
verifier to a suspect driver.
Arguments:
Arg1: 0000000000000003, the pool freelist is corrupt.
Arg2: fffffa800a550010, the pool entry being checked.
Arg3: 0000000000000000, the read back flink freelist value (should be the same as 2).
Arg4: fffffa800a550010, the read back blink freelist value (should be the same as 2).
Although the driver is not listed on the stack (I couldn't get the proper context for the raw stack)
the usual suspect in this kind of stack (mentioning hal) are the network adapters.

Code:
0: kd> k
# Child-SP RetAddr Call Site
00 fffff800`04a28ba8 fffff800`033fd70f nt!KeBugCheckEx
01 fffff800`04a28bb0 fffff800`033fe4f1 nt!ExDeferredFreePool+0xcbb
02 fffff800`04a28c40 fffff800`03210865 nt!ExFreePoolWithTag+0x411
03 fffff800`04a28cf0 fffff880`0f21307b hal!HalPutScatterGatherList+0x115
04 fffff800`04a28d50 fffff880`0f213b0f USBPORT!USBPORT_Core_iCompleteDoneTransfer+0x45f
05 fffff800`04a28e30 fffff880`0f21166f USBPORT!USBPORT_Core_iIrpCsqCompleteDoneTransfer+0x3a7
06 fffff800`04a28e90 fffff880`0f202f89 USBPORT!USBPORT_Core_UsbIocDpc_Worker+0xf3
07 fffff800`04a28ed0 fffff800`032d530c USBPORT!USBPORT_Xdpc_Worker+0x1d9
08 fffff800`04a28f00 fffff800`032cdd15 nt!KiRetireDpcList+0x1bc
09 fffff800`04a28fb0 fffff800`032cdb2c nt!KxRetireDpcList+0x5
0a fffff880`02926c30 00000000`00000000 nt!KiDispatchInterruptContinue

Code:
Product Type 802.11 USB Wireless LAN Card
Driver c:\windows\system32\drivers\netr28ux.sys
The driver is very old.

Code:
lmvm netr28ux

Image path: \SystemRoot\system32\DRIVERS\netr28ux.sys
Image name: netr28ux.sys
Browse all global symbols functions data
Timestamp: Tue Sep 15 07:36:45 2009
Driver Reference Table - netr28ux.sys
Please update the driver.

I don't have enough information to suggest a specific driver,
if you're unsure of what driver to download please provide images of the device
including one of the FCC-ID.

The other bug check, as I mentioned before, paints a picture regarding Avast & COMODO.
I would normally suggest removing them both and installing MSE, but I feel it can wait for now
at least after we asses the situation with an updated driver.

http://www.sevenforums.com/bsod-help-support/314128-bsod-still-after-doing-windows-repair-install.html
Relevancy 41.28%

I changed my faulty HDD and installed new one Done dust cleaning and changed thermal paste After windows install, 7 new BSOD 0x00000101 Windows install I get BSOD x Log Code Dump File - - dmp Crash Time Bug Check String Bug Check Code x Parameter x Parameter x Parameter x b c Parameter x Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe d File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win sp rtm - Processor -bit Crash Address ntoskrnl exe d Stack Windows 7 new install, BSOD 0x00000101 Address ntoskrnl exe f fd Stack Address ntoskrnl exe cae Stack Address ntoskrnl exe b b Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - Windows 7 new install, BSOD 0x00000101 - dmp Crash Time Bug Check String Bug Check Code x Parameter x Parameter x Parameter x dc Parameter x Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe d File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win sp rtm - Processor -bit Crash Address ntoskrnl exe d Stack Address ntoskrnl exe f fd Stack Address ntoskrnl exe cae Stack Address ntoskrnl exe b b Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time Bug Check String Bug Check Code x Parameter x Parameter x Parameter x dc Parameter x Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe d File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win sp rtm - Processor -bit Crash Address ntoskrnl exe d Stack Address ntoskrnl exe f fd Stack Address ntoskrnl exe cae Stack Address ntoskrnl exe b b Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time Bug Check String KERNEL MODE EXCEPTION NOT HANDLED Bug Check Code x e Parameter xc d Parameter x Parameter x db e d Parameter x Caused By Driver halmacpi dll Caused By Address halmacpi dll ba File Description Hardware Abstraction Layer DLL Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win sp rtm - Processor -bit Crash Address ntoskrnl exe Stack Address ntoskrnl exe ab b Stack Address ntoskrnl exe c Stack Address ntoskrnl exe ffa Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size

A:Windows 7 new install, BSOD 0x00000101

Was this after succesfull install? Can you boot into win7... it looks like you did(?) How did you list the dump otherwise

http://www.sevenforums.com/bsod-help-support/272818-windows-7-new-install-bsod-0x00000101.html
Relevancy 41.28%

I have had this computer about a month now and recently It blue screens sometimes when gaming sometimes doing nothing Problem signature Problem Event Name BlueScreen OS Version Locale ID Here is the message it gave me Extra information about the problem BCCode f BCP BCP FFFFFA F B BCP FFFFFA F E BCP FFFFF OS Version Service Pack Product Bucket ID X Before after BSOD fresh windows install and xF IOERR c e IMAGE hardware disk Server information c d - ac- b -b - efc a fe I don't know what is causing it Here is my system info CPU Manufacturer GenuineIntel Description Intel Family Model Stepping Name Intel R Core TM i - CPU GHz Speed Installed RAM MB PC Info PC or motherboard model To Be Filled By O E M System BSOD Before and after fresh windows install name RALGONDO-PC System Manufacturer To Be Filled By O E M Onboard devices Graphics Description AMD Radeon HD Name AMD Radeon HD RAM MB Driver Date - Driver Version CD DVD drives Description CD-ROM Drive Caption ATAPI iHAS C ATA Device Manufacturer Standard CD-ROM drives I recently changed my computer to create a dmp file upon it's next blue screen that I am anticipating It crashed again today Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode f BCP BCP FFFFFA DD E BCP FFFFFA DD CC BCP FFFFF OS Version Service Pack Product Files that help describe the problem C Windows Minidump - - dmp C Users Ralgondo AppData Local Temp WER- - sysdata xml Happened again for the love of god im desperate I TRIED REINSTALLING WINDOWS WITH THE DISK I WAS GIVEN Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode f BCP BCP FFFFFA A D BCP FFFFFA A D BCP FFFFF B OS Version Service Pack Product Files that help describe the problem C Windows Minidump - - dmp C Users Ralgondo AppData Local Temp WER- - sysdata xml

A:BSOD Before and after fresh windows install

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

If you are overclocking STOP

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.



To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

http://www.sevenforums.com/bsod-help-support/229312-bsod-before-after-fresh-windows-install.html
Relevancy 41.28%

I am trying to install a fresh copy of Windows 7 onto a new Samsung SSD. After the machine restarts for the first time, it will work for a few seconds before I get hit with a BSoD. Since it's a new install, I don't have access to all the dump info, but I
do know the error was driver_irql_not_less_or_equal 0x000000d1 and it also had something to do with the iusb3xhc.sys file.
Also note that this is a brand new laptop that has passed memtest.

https://social.technet.microsoft.com/Forums/en-US/ce0e466a-2bb8-488c-b24d-3f53bfdb55b4/bsod-halfway-through-windows-7-install?forum=w7itproinstall
Relevancy 41.28%

I've build a computer and want to install windows x on it But when I start windows try BSOD install when I ultimate 64b to 7 the setup I allways get a bsod Most of the time with this error x I also had these x F x C X E x A These are my specifications Mobo MSI P Diamond CPU Intel core Quad Q GHz RAM Kingston HyperX KHX C D K GX I've put in X GB in slot and atm HD Maxtor I Maxtor II tried BSOD when I try to install windows 7 ultimate 64b seperatly no success Graphics Powercolor radeon HD PCS PSU OCZ ModXstream Pro W The files are loaded from the DVD then I see the windows logo After that I usually get a BSOD Right before I have to do the settings and create partitions Very rarely I can get past it and start the installation but then a blue screen comes up anyway When I try in Safe mode it loads drivers until driver sys Then it just stops Right now I've put only one memory stick in GB and I tested it with memtest there were no errors I also checked the hard drive for errors I was able to succesfully install windows professional I also tried to install Windows XP but that didn't work either Could it be my graphics card If so what can I do about it I don't have onboard graphics Right now I'm out of ideas Anyone who knows what the solution could be

A:BSOD when I try to install windows 7 ultimate 64b

Stop 0x124 - what it means and what to try

http://www.sevenforums.com/installation-setup/141014-bsod-when-i-try-install-windows-7-ultimate-64b.html
Relevancy 41.28%

hello,
I have MSI laptop GT70-20D all my drivers are updated to work with windows 8.1 from offical MSI site & I have my laptop running smooth once I leave it on for downloading my windows BSOD . please I need a tech advise.

A:windows 8.1 X64 freash install BSOD

SSD's were temperamental when they first came out, but their reliability has improved greatly over the last year or two. There are 2 things that MUST be checked on systems with BSOD's and SSD's:




1) That the SSD firmware is the latest available for the SSD. I usually can't see this info in the reports, so I rely on you to check it.
2) That the storage controller drivers on the motherboard are the most recent. They must date from late 2012 or later. This is ALL controllers, not just the one that the SSD is attached to. If involved these should be visible in the memory dump - but it doesn't hurt to check manually.



Virtual Box ethernet adapter is disabled. Is this deliberate? If so, why?

The Qualcomm Atheros Killer Service/KillerNetManager is known to cause BSOD's. Please follow the workaround instructions here:





First, open the Run dialog (Win + R keys) and type in "services.msc" (without the quotes) and press Enter
Scroll down and locate the "Qualcomm Atheros Killer Service" and right click on it. Select "Stop"
Right click on it again and this time select "Properties"
In the dropdown box for "Startup type", select "Disabled", then click on the "OK" button at the bottom of the window

Next, open Task Manager (right click on TaskBar and select "Task Manager")
Click on the "More details" dropdown (if present)
Click on the "Startup" tab
Scroll down and locate the "KillerNetManager" entry, right click on it and select "Disable"
There may also be an Install Shield (with the Killer gaming K next to it), if so Right click on it and select "Disable"
Finally, restart the system in order for the changes to take affect.



At times the Killer Network Manager will continue to load. If so, it's usually listed in the MSINFO32...Software Environment...Startup Programs section. If it is, please try this:





It may be that the instructions aren't stopping everything.
In some cases, there's a program running out of the Program Files/Program Files (x86) directory.
"c:\program files\qualcomm atheros\killer network manager\killer~1.exe" (NOTE: killer~1.exe is most likely killernetmanager.exe)
In other cases, there's a program running out of c:\windows\installer\{Long string of letters, numbers, and dashes}\networkmanager.exe_130c27d738f34c89bddf21bcfd74b56d.exe (the long string of letters and numbers may change)

Here's some things to try
1) Please see if there are any entries in the Startup tab of Task Manager that are related to Qualcomm/Atheros/Killer Network Manager (and NOT the card itself) and disable them (please let us know what you find) Be careful as the wrong selection can disable the network card.
2) Check in "msconfig" for any entries that aren't in the Startup tab of Task Manager. Let us know if you find any Qualcomm/Atheros/Killer entries there (we'll disable them differently if they are there).
3) Locate the "c:\program files\qualcomm atheros\killer network manager\killer~1.exe" and rename the .exe to .BAD (the killer~1 is actually a filename that starts with killer and ends with .exe) There will be an error in event viewer, but it'll stop the bugger from loading.
4) Locate the "c:\windows\installer\{Long string of letters, numbers, and dashes}\networkmanager.exe_130c27d738f34c89bddf21bcfd74b56d.exe" entry and rename the .exe to .BAD (the long string of letters and numbers may change)

Just FYI - here are the MSI workaround instructions: MSI USA




Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable! :

MBfilt64.sys T... Read more

http://www.eightforums.com/bsod-crashes-debugging/35689-windows-8-1-x64-freash-install-bsod.html
Relevancy 41.28%

I just recently installed windows 7 on my hp tx1320us and it worked fine. I did the upgraded install and everything was great. But because it was a used computer, and it was running slow, I decided to reinstall with a custom/clean install. This worked ok but it wiped all my drivers including the video card and the "coprocessor" which I'm not sure what it is. The wifi card inside was already fried so that was replaced. The bsod started happening randomly and would happen right as would login, or would just freeze up on the "welcome" screen. Please help!!!!

A:Windows 7 Clean Install BSOD

Hi computerman; sorry to learn of your problems. Please read this thread, follow the instructions and post back. We will be glad to help you.

http://www.sevenforums.com/crashes-d...tructions.html

http://www.sevenforums.com/bsod-help-support/122919-windows-7-clean-install-bsod.html
Relevancy 41.28%

Hey so i recently less than a week ago upgraded my windows install from bit to bit so im on a fresh windows install and everything was working fine until i left my computer on overnight to do all the windows updates and came back to find it had restarted due to a bluescreen install windows Fresh - BSOD i figured it may be a one off and didnt do anything about it until it happened while i was using it just now So i downloaded BSOD - Fresh windows install BluescreenViewer and here is the first BSOD http puu sh bxKa de b af png This is the second one that happened while i was actually using the computer http puu sh bxNu bd fd fa png I searched on the internet for a while to see if i could figure out how to solve it myself and read that using windows verifier to find out which driver is apparently responsible can be useful so i ran that and here is what that found http puu sh bxRQ ec f png Any help would be appreciated as im not sure what to do on the right hand side each BSOD says it is caused by a different driver file and im not sure what program thing either of them are attached to or from nbsp

Relevancy 41.28%

I have had windows 7 installed now for 2 weeks i did have it installed before but i installed a new HDD as my main drive.

It has happened a few times now but i have only saved 2 dumps which are attached. I am currently using Windows 7 Pro 64bit which i got from the msdnaa through my University.


I don't really fancy reinstalling windows again but if i have to then i will but if there are work arounds that would be great!

The main errors are: ntoskrnl.exe, Wdf01000.sys, PSHED.dll

A:BSOD - After a fresh install of windows!

Welcome!

Let's go through our generic tips. If you're overclocking, stop. Disconnect all unnecessary hardware, like external USB drives, video cards, etc.

Try a memory test. Download Memtest86 and burn the ISO to a CD using ImgBurn. Boot from the CD, and run at least 5 passes.

Also, try scanning your system files. Open an elevated command prompt and run sfc /scannow.

Good luck!
~JK


Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Jonathan\Desktop\021110-19016-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0xfffff800`02a63000 PsLoadedModuleList = 0xfffff800`02ca0e50
Debug session time: Thu Feb 11 08:35:07.143 2010 (GMT-5)
System Uptime: 0 days 6:03:53.312
Loading Kernel Symbols
...............................................................
................................................................
.........................
Loading User Symbols
Loading unloaded module list
.......
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck D1, {2e, 2, 1, fffff88000e3b891}

Unable to load image \SystemRoot\system32\DRIVERS\LHidFilt.Sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for LHidFilt.Sys
*** ERROR: Module load completed but symbols could not be loaded for LHidFilt.Sys
Probably caused by : hardware ( LHidFilt+9131 )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arguments:
Arg1: 000000000000002e, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, value 0 = read operation, 1 = write operation
Arg4: fffff88000e3b891, address which referenced memory

Debugging Details:
------------------
WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff80002d0b0e0
000000000000002e

CURRENT_IRQL: 2

FAULTING_IP:
Wdf01000!FxRequest::GetMemoryObject+4a5
fffff880`00e3b891 01752d add dword ptr [rbp+2Dh],esi

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

BUGCHECK_STR: 0xD1

PROCESS_NAME: Wow.exe

TRAP_FRAME: fffff80000ba2520 -- (.trap 0xfffff80000ba2520)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=fffffa80057ce2b0 rbx=0000000000000000 rcx=fffffa80057e6650
rdx=0000000000000001 rsi=0000000000000000 rdi=0000000000000000
rip=fffff88000e3b891 rsp=fffff80000ba26b0 rbp=0000000000000001
r8=fffff80000ba2703 r9=0000000000000000 r10=fffffa800592dd30
r11=0000000000000002 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei pl nz na pe nc
Wdf01000!FxR... Read more

http://www.sevenforums.com/bsod-help-support/64110-bsod-after-fresh-install-windows.html
Relevancy 41.28%

Computer crashes and reboots. Dump file.....






Quote:
==================================================
Dump File : 052812-18500-01.dmp
Crash Time : 5/28/2012 5:38:55 PM
Bug Check String : PAGE_FAULT_IN_NONPAGED_AREA
Bug Check Code : 0x00000050
Parameter 1 : fffff823`18c01884
Parameter 2 : 00000000`00000000
Parameter 3 : fffff800`02891db8
Parameter 4 : 00000000`00000005
Caused By Driver : atapi.sys
Caused By Address : atapi.sys+28ff
File Description :
Product Name :
Company :
File Version :
Processor : x64
Crash Address : ntoskrnl.exe+7f1c0
Stack Address 1 :
Stack Address 2 :
Stack Address 3 :
Computer Name :
Full Path : C:\Windows\Minidump\052812-18500-01.dmp
Processors Count : 2
Major Version : 15
Minor Version : 7601
Dump File Size : 289,376


Did a memory test, everything seems fine. Running MS security Essentials. Did a format and reinstall. Updated drivers. Any ideas?

A:BSOD...Random. New Windows 7 install.

Fill out your system specs. Read the link in my signature on how to do that. Once you've done that, we can help you.

http://www.sevenforums.com/bsod-help-support/232152-bsod-random-new-windows-7-install.html
Relevancy 41.28%

I recently assembled a new computer and I m receiving a blue screen during the installation process After loading all of the drivers windows crashes on install during BSOD Solved: x64 7 Windows the screen where the windows logo is displayed before and kind of screens or prompts are displayed I m getting the following error message STOP x E ACPI SYS Here are my system specs Core i - K Antec W x gb G Skill Ripjaw DDR ASRock Z Extreme LGA Radeon HD PCI-E WD Caviar TB rpm I have tried quite a few Solved: Windows 7 x64 BSOD during install things to Solved: Windows 7 x64 BSOD during install narrow down the problems I don Solved: Windows 7 x64 BSOD during install t believe my ram is the issue I have run memtest on it and it tested all gigs with no errors Out of frustration I have also taken my hdd and the windows iso dvd to an existing computer pulled the hdd from that and installed windows on the new hdd thinking that I could put that drive in my new computer after the install However I m getting the same problem when that hdd is put back in my new machine and I attempt to boot from it I think that this does exclude the hdd or the burned iso dvd as being the issue though I also put in a linux dvd and booted from linux live thinking that I could get additional error messaging but I was surprised to find that my computer booted into linux just fine I have tried stripping everything out of the mobo and running off what the bare minimum requirements were to boot I have also tried taking out all the components and putting them back in including cpu and I have verified that no cables are loose I have also tried re-ordering the sata cables between the dvd drive and the hdd So far nothing I have tried has worked The bios does not post any kind of errors I m running out of ideas I feel like I ve gone through just about every potential problem that could be causing this Thanks in advance for looking into this with me nbsp

A:Solved: Windows 7 x64 BSOD during install

So it must have been a fluke, I stripped all the parts out except the absolute bare essentials and re-downloaded the iso and this time put it on a bootable usb drive. Somehow that did the trick. I guess it turns out that just starting over again was all that I needed to do.
 

https://forums.techguy.org/threads/solved-windows-7-x64-bsod-during-install.1051687/
Relevancy 41.28%

Hey guys,

I really need some help

Attached is my BSOD DMP files.

Please help

A:BSOD after install of windows 7 ultimate

  
Quote: Originally Posted by swiftbite


Hey guys,

I really need some help

Attached is my BSOD DMP files.

Please help


Took a quick look at the dumps. both were similar. Both reflected a power plan problem when entering or leaving hibernation.

I would
update bios
Run a system file check to verify your system files
to run type cmd in search>right click and run as admin>SFC /SCANNOW

let us know the results
check the power plan settings to see if your computer supports the mode in use by typing powercfg -h in the cmd window.

Could also be caused by memory
download and run memtestx86 to test the memory

Let us know the results

Ken J


Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\K\Desktop\110309-17128-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*d:\symbols*Symbol information
Executable search path is:
Windows 7 Kernel Version 7600 MP (4 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.x86fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0x82816000 PsLoadedModuleList = 0x8295e810
Debug session time: Tue Nov 3 05:51:38.582 2009 (GMT-5)
System Uptime: 0 days 2:11:06.909
Loading Kernel Symbols
...............................................................
................................................................
....................
Loading User Symbols
Loading unloaded module list
.....
0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

INTERNAL_POWER_ERROR (a0)
The power policy manager experienced a fatal error.
Arguments:
Arg1: 0000000b, The hibernation file is too small.
Arg2: 77eba000, Size of the hibernation file.
Arg3: 00000003, HIBERFILE_PROGRESS_MEMORY_RANGES
Arg4: 1d66a000, Size of the remaining memory ranges.

Debugging Details:
------------------
BUGCHECK_STR: 0xA0

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

PROCESS_NAME: System

CURRENT_IRQL: 2

LAST_CONTROL_TRANSFER: from 82b3e033 to 828f2d10

STACK_TEXT:
8d293714 82b3e033 000000a0 0000000b 77eba000 nt!KeBugCheckEx+0x1e
8d293844 82b3dc09 87d12388 e2b0f000 00000010 nt!PopWriteHiberPages+0x98
8d293894 82b3d9e6 000102a0 8d2939b8 00000010 nt!PopAddPagesToCompressedPageSet+0x192
8d2938cc 82b3d6f3 87d12388 8d2939b8 00000001 nt!PopBufferCompressedPageSet+0xaf
8d2939c8 82b3d391 e2ae3000 e2a8a000 00000000 nt!PopWriteHiberImage+0x310
8d293aac 82c464ab 87d12388 00000092 8d293b98 nt!PopSaveHiberContext+0x1be
8d293ae4 82b367d7 00003705 82b3d1d2 87d12388 hal!HaliAcpiSleep+0xbb
8d293b18 82b3669f 00000000 00000000 000f4240 nt!PopHandleNextState+0x107
8d293b2c 82b36429 00000004 00000006 87d12388 nt!PopIssueNextState+0x24
8d293c40 82b3e547 00000006 87d12388 00000000 nt!PopInvokeSystemStateHandler+0x2e7
8d293ca4 82b3be91 00000001 00000006 8bb93ba0 nt!PopEndMirroring+0x64
8d293d1c 82b35a7a 8d293d3c 00000000 85195020 nt!MmDuplicateMemory+0x8ac
8d293d50 82a2466d 8bb93ba0 abb13f10 00000000 nt!PopTransitionToSleep+0xce
8d293d90 828d60d9 82b359ac 8bb93ba0 00000000 nt!PspSystemThreadStartup+0x9e
00000000 00000000 00000000 00000000 00000000 nt!KiThreadStartup+0x19
STACK_COMMAND: kb

FOLLOWUP_IP:
nt!PopWriteHiberPages+98
82b3e033 cc int 3

SYMBOL_STACK_INDEX: 1

SYMBOL_NAME: nt!PopWriteHiberPages+98

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: nt

IMAGE_NAME: ntkrpamp.exe

DEBUG_FLR_IMAGE_TIMESTAMP: 4a5bc007

FAILURE_BUCKET_ID: 0xA0_nt!PopWriteHiberPages+98

BUCKET_ID: 0xA0_nt!PopWriteHiberPage... Read more

http://www.sevenforums.com/bsod-help-support/35073-bsod-after-install-windows-7-ultimate.html
Relevancy 41.28%

Hi all,

I recently downgraded from Windows 10 due to constant BSOD's (was initially upgraded from windows 8.1).

I successfully performed a clean install this morning but have already encountered three BSODs,

I have a feeling that it might be my origin software but I'm not sure

Regards

Matt

A:BSOD - Fresh windows 8.1 install

Hi mattblue,

Welcome to the 8forums.

As you get a 0x1a(memory_management), 0xA(IRQL_NOT_LESS_OR_EQUAL) pointing to hardware and 0x139(KERNEL_SECURITY_CHECK_FAILURE) caused by GPU drivers, please run a few tests.



Diagnostic test

GPU TEST

Run Furmark to test your GPU. Furmark tutorial


   Note
Run Furmark for around 30 minutes

   Warning
Your GPU temperatures will rise quickly while Furmark is running. Keep a keen eye on them and abort the test if temperatures rise too high



Diagnostic Test

RAM TEST

Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 7 Forums


   Note


MemTest86+ needs to be run for at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.

http://www.eightforums.com/bsod-crashes-debugging/71445-bsod-fresh-windows-8-1-install.html
Relevancy 41.28%

Hello,

I've been having BSOD issues about every four hours since completing a fresh install after purchasing a new hard drive.

Here is my information:
? OS - Windows 7
? x64
? What was original installed OS on system - Installed Windows 7
? Is the OS an OEM version: Retail
? Age of system: 4 months
? Age of OS installation - 5 days
? CPU: Intel i7 950
? Video Card - Dual nVidia 250GTS
? MotherBoard - Asus P6X58D-E
? Power Supply - Thermaltake 775w

This one has me scratching my head, as I can't track down the cause and don't understand what I'm reading in the dump files.

A:BSOD - Windows 7 x64 - Clean Install

Hi -

HDD appears to be failing.

- Run chkdsk /r
- Run HDD diags - http://www.techsupportforum.com/2828431-post7.html

Test RAM as well -

Run memtest86+ - http://www.techsupportforum.com/2863029-post5.html


Windbg Logs
--> http://sysnative.com/bsod2011/jcgrif..._jcgriff2_.txt
--> http://sysnative.com/bsod2011/jcgrif...riff2_.txt.zip

Regards. . .

jcgriff2


`
BSOD BUGCHECK SUMMARY

Code:

Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Sun Jan 23 21:36:50.589 2011 (GMT-5)
System Uptime: 0 days 1:47:25.698
Probably caused by : memory_corruption ( nt!MiBadShareCount+4c )
BUGCHECK_STR: 0x4E_99
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: avgchsva.exe
FAILURE_BUCKET_ID: X64_0x4E_99_nt!MiBadShareCount+4c
Bugcheck code 0000004E
Arguments 00000000`00000099 00000000`002ac4ee 00000000`00000003 00000000`002ae3ca
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Sun Jan 23 15:57:46.622 2011 (GMT-5)
System Uptime: 0 days 22:28:48.730
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+21b46 )
BUGCHECK_STR: 0x1a_5003
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: uTorrent.exe
FAILURE_BUCKET_ID: X64_0x1a_5003_nt!_??_::FNODOBFM::_string_+21b46
Bugcheck code 0000001A
Arguments 00000000`00005003 fffff700`01080000 00000000`000029ea 000025fe`000043d4
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Sat Jan 22 17:27:10.935 2011 (GMT-5)
System Uptime: 2 days 0:29:43.044
Probably caused by : ntkrnlmp.exe ( nt!ExpInterlockedPopEntrySListFault16+0 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x3B
PROCESS_NAME: skypePM.exe
FAILURE_BUCKET_ID: X64_0x3B_nt!ExpInterlockedPopEntrySListFault16+0
Bugcheck code 0000003B
Arguments 00000000`c0000005 fffff800`02ad4905 fffff880`0c8bfea0 00000000`00000000
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Thu Jan 20 11:47:09.113 2011 (GMT-5)
System Uptime: 0 days 0:08:30.300
Probably caused by : Ntfs.sys ( Ntfs!NtfsCommonCleanup+26d3 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: TrustedInstall
BUGCHECK_STR: 0x24
FAILURE_BUCKET_ID: X64_0x24_Ntfs!NtfsCommonCleanup+26d3
Bugcheck code 00000024
Arguments 00000000`001904fb fffff880`0bbf66e8 fffff880`0bbf5f40 fffff880`012f4d06
??????????????????????????????????????????????????????????????????????????????????????``


by jcgriff2

J. C. Griffith, Microsoft MVP

https://mvp.support.microsoft.com/profile/Griffith


www.sysnative.com

www.jcgriff2.com


??????????????????????????????????????????????????????????????????????????????????????

http://www.techsupportforum.com/forums/f299/bsod-windows-7-x64-clean-install-545967.html
Relevancy 41.28%

I've been having a problem re-installing Windows onto a computer The computer hadn't been working correctly for Install Windows - 7 BSOD - 0x0000007E a while but I discovered it was a Memory problem and removed the dead RAM stick I've formatted the drive already and tried installing Windows about or so times now all failing I get passed the Expanding Windows Files and installing part but when the computer restarts and it says Completing Installation it hangs for a minute and then BSOD I'm installing a legitimate version via USB I've tried so far Remaking the USB install using both the Microsoft USB tool and PowerISO's usb boot disk maker Doing the same after re-downloading the ISO I'm run memtest on both memory sticks currently in use in all slots and both passed in each one I am now using just one of the sticks in the primary slot I've updated the MB's BIOS though the most recent one only fixed a couple of minor things I tried unplugging everything and holding the power button for seconds as was suggested somewhere else also tried leaving the computer unplugged for minutes and doing the same thing I also tried manually setting the memory speeds to what it reads on the sticker on the stick I'm not currently using The computer was working fine before I tried reinstalling Windows It was just so cluttered I thought a fresh install would do it some good I almost wish I hadn't But I'm hoping this is a learning experience Thanks in advance for any help JPALSOHere is a not so great picture of the BSOD http imgur com nC SXC

A:Windows 7 Install - BSOD - 0x0000007E

This error usually occurs when a usb device fails to communicate. What type of usb port are you using for the usb bootable? Is it a 3.0 usb port? If so try it in a 2.0 port if you have one. Disconnect all devices that are not needed that are usb (if you have any wireless usb adapters, webcams etc remove them). If it continues to fail I would recommend using a different windows install iso or a different disc to install windows, it may just be a problem with the windows version you have on your usb device.
 
I found a thread here where they had the same problem on install, turns out their disc was the cause: www.techspot.com/community/topics/0x0000007e-while-trying-to-install-windows-7-on-new-build.173831/

http://www.bleepingcomputer.com/forums/t/526472/windows-7-install-bsod-0x0000007e/
Relevancy 41.28%

So I installed VMware and after the install when I try to load the program it gives me a BSOD everytime I try to start the program Microsoft R Windows Debugger Version X Copyright c Microsoft Corporation All rights reserved Loading Dump File C Windows Minidump - - dmp VMware Windows 7 install BSOD after 8 Mini Kernel Dump File Only registers and stack trace are available WARNING Whitespace at end of path element Symbol search path is SRV c symbols http msdl microsoft com download symbols Executable search path is Windows Kernel Version Service Pack MP procs Free x Product WinNt suite TerminalServer SingleUserTS Built by amd fre win sp gdr - Machine Name Kernel base xfffff PsLoadedModuleList xfffff Debug session Windows 7 VMware 8 BSOD after install time Wed Aug GMT- System Uptime days Loading Kernel Symbols Loading User Symbols Loading unloaded module list Bugcheck Analysis Use analyze -v to get detailed debugging information BugCheck B c fffff d fffff a e Probably caused by ntkrnlmp exe nt wcsstr Followup MachineOwner --------- kd gt Windows 7 VMware 8 BSOD after install analyze -v Bugcheck Analysis SYSTEM SERVICE EXCEPTION b An exception happened while executing a system service routine Arguments Arg c Exception code that caused the bugcheck Arg fffff d Address of the exception Windows 7 VMware 8 BSOD after install record for the exception that caused the bugcheck Arg fffff a e Address of the context record for the exception that caused the bugcheck Arg zero Debugging Details ------------------ EXCEPTION CODE NTSTATUS xc - The instruction at x lx referenced memory at x lx The memory could not be s FAULTING IP nt wcsstr fffff d fb movzx eax word ptr rcx CONTEXT fffff a e -- cxr xfffff a e rax rbx rcx rdx fffff bf b rsi a rdi fffffa e b rip fffff d rsp fffff aa rbp r r r fffff bf b r r fffffa e r fffffa b a r fffffa e c r iopl nv up ei pl nz na po nc cs ss ds b es b fs gs b efl nt wcsstr x fffff d fb movzx eax word ptr rcx ds b Resetting default scope CUSTOMER CRASH COUNT DEFAULT BUCKET ID VISTA DRIVER FAULT BUGCHECK STR x B PROCESS NAME vmware-usbarbi CURRENT IRQL LAST CONTROL TRANSFER from to fffff d STACK TEXT fffff aa nt wcsstr x FOLLOWUP IP nt wcsstr fffff d fb movzx eax word ptr rcx SYMBOL STACK INDEX SYMBOL NAME nt wcsstr FOLLOWUP NAME MachineOwner MODULE NAME nt IMAGE NAME ntkrnlmp exe DEBUG FLR IMAGE TIMESTAMP fa f STACK COMMAND cxr xfffff a e kb FAILURE BUCKET ID X x B nt wcsstr BUCKET ID X x B nt wcsstr Followup MachineOwner --------- kd gt analyze -v Bugcheck Analysis SYSTEM SERVICE EXCEPTION b An exception happened while executing a system service routine Arguments Arg c Exception code that caused the bugcheck Arg fffff d Address of the exception record for the exception that caused the bugcheck Arg fffff a e Address of the context record for the exception that caused the bugcheck Arg zero Debugging Details ------------------ EXCEPTION CODE NTSTATUS xc - The instruction at x lx referenced memory at x lx The memory could not be s FAULTING IP nt wcsstr fffff d fb movzx eax word ptr rcx CONTEXT fffff a e -- cxr xfffff a e rax rbx rcx rdx fffff bf b rsi a rdi fffffa e b rip fffff d rsp fffff aa rbp r r r fffff bf b r r fffffa e r fffffa b a r fffffa e c r iopl nv up ei pl nz na po nc cs ss ds b es b fs gs b efl nt wcsstr x fffff d fb movzx eax word ptr rcx ds b Resetting default scope CUSTOMER CRASH COUNT DEFAULT BUCKET ID VISTA DRIVER FAULT BUGCHECK STR x B PROCESS NAME vmware-usbarbi CURRENT IRQL LAST CONTROL TRANSFER from to fffff d STACK TEXT fffff aa nt wcsstr x FOLLOWUP IP nt wcsstr fffff d fb movzx eax word ptr rcx SYMBOL STACK INDEX SYMBOL NAME nt wcsstr FOLLOWUP NAME MachineOwner MODULE NAME nt IMAGE NAME ntkrnlmp exe DEBUG FLR IMAGE TIMESTAMP fa f STACK COMMAND cxr xfffff a e kb FAILURE BUCKET ID X x B nt wcsstr BUCKET ID X x B nt wcsstr Followup MachineOwner ---------Click to expand Here is my specs Intel k ghz gigabyte z A-D -B GTX TI g skill ripjaw x gb ddr - - - gb WD HDD Corsair TX V Windows Ultimat... Read more

A:Windows 7 VMware 8 BSOD after install

I tried uninstalling VMware 8 and installing VMware 7 and it still gives me BSOD, any ideas?
 

http://www.techspot.com/community/topics/windows-7-vmware-8-bsod-after-install.183983/
Relevancy 41.28%

the computer im working with is a desktop that i am help a friend of mine build this is not my first time building so im fairly certain there BSOD install 7 on [SOLVED] windows are no conflicts there the only question is the ram in regards to the hardware its not actually [SOLVED] BSOD on windows 7 install on the QVL but it [SOLVED] BSOD on windows 7 install has the same timeings and wattage as other memory on the QVL its just a slightly new model [SOLVED] BSOD on windows 7 install now the details the system posts just fine bios sees all the hardware plugged in just fine if i let the system boot it spins up the drive and goes to the quot windows is loading files quot screen of windows this part goes just fine loads all the files and kicks over to the quot starting windows quot screen this is were one of two things will happen it will either freeze in the quot starting windows quot screen and just sit there till you reset the computer or it will start the wierd color ball swirling in and suddenly bsod in a couple of seconds this happens every time i try to install windows onto this computer now the bsod points to quot netio sys quot and most of the time says quot DRIVER IRQL NOT LESS OR EQUAL quot i cant remember what all it says besides this this was all happening late last night however i will be back at the computer in a few hours and will update my post then i have tried updating the bios once but it didn't do anything ASUS has put out a few bios updates so in going to try the other ones as well but besides that im not sure what else to do and i cant seem to find any help via google can anyone help me

A:[SOLVED] BSOD on windows 7 install

details of system:

-Windows 7 64 Bit - purchased
-brand new parts
-AMD Phenon II x4 925 (processor)
-Asus M4A87TD EVO (motherboard)
-EVGA Nvidia 9600 GSO (video card)
-Rosewill 650 watt PSU


i will post the rest of the BSOD info when i get back infront of that computer...

http://www.techsupportforum.com/forums/f299/solved-bsod-on-windows-7-install-494779.html
Relevancy 41.28%

Hi I've recently decided to take the leap and buy windows Yesterday I finally got round to installing it on a different partition so that I can still keep my old XP installs However I'm having problems with seemingly random BSODs I have not yet figured out what triggers them These BSODs do not happen in XP so I assume it windows problems install 7 New BSOD is a windows driver issue After installing the OS I let the automatic updates install I New windows 7 install BSOD problems tried to install New windows 7 install BSOD problems the latest graphics driver for my - CCC but I had BSOD problems installing this Tried CCC same problem Have now managed to install CCC However I got a BSOD when I opened New windows 7 install BSOD problems CCC I don't know whether the random BSODs are actually anything to do with the graphics driver or not The only other hardware I have in place are a USB wireless dongle which was automatically detected so I didn't manually install any drivers and an Audigy zs sound card which I have not yet installed the drivers for as I thought I should solve any existing problems first I have not installed any other drivers manually Following the advice that I read somewhere else in this forum I have attached a zipped copy of my minidump directory Any help would be greatly appreciated Thanks in advance Robb

A:New windows 7 install BSOD problems

An update - I've just had another BSOD when I clicked on the 'system performance rating' thing in the system menu, if that helps...

http://www.sevenforums.com/bsod-help-support/47227-new-windows-7-install-bsod-problems.html
Relevancy 41.28%

A few months ago my computer crapped out it would start up to a certain point forget where exactly and I would need to press a key to continue start-up but no power was being When SP2 BSOD Solved: install to Windows XP trying sent to any USB ports and I couldn t Solved: BSOD When trying to install Windows XP SP2 press anything Solved: BSOD When trying to install Windows XP SP2 So that kinda gave me the little push I needed to upgrade my motherboard Once that was in I realized Solved: BSOD When trying to install Windows XP SP2 that I hadn t done my homework and would need to change some other hardware to be compatible with new MB Previous Set-up Asus A NSLI Motherboard AMD Athlon CPU Kingston ValuRAM x GB Nvidia GeForce Video Card New Set-up Asus M A Motherboard AMD Phenom II CPU Corsair dominator RAM x GB Nvidia GeForce Video Card Now when I put all my new stuff together I realized that my old DVD drive was not compatible either It was IDE and the new MB has no IDE ports just SATA SO I went out and picked up one of these http www meritline com ide-to-sata-or-sata-to-ide-adapter---p- aspx Plugged the adapter in started up computer with Windows XP SP installation disc in drive The installer starts loading stuff says on bottom info bar and when it reaches the point where it says quot Windows is starting quot the screen flickers a bit then the blue screen o death pops up Here s the Technical Information that is with the BSOD x B xF xC x Ive tried unplugging my hard drives before trying to install in case that was the problem but no dice What I m thinking Could be faulty terrible adapter but then why would it seemingly work for starting disc loading stuffs Should I install windows or from a boot disc which one in that case Thanks for any help nbsp

A:Solved: BSOD When trying to install Windows XP SP2

In the BIOS look for IDE compatibilty mode (non-AHCI). I'm thinking the install disc doesn't understand the SATA controllers so if you can switch to IDE emulation it should work. If you got a driver disc with the motherboard with XP drivers on it, there would be SATA drivers included on that which you can integrate into the XP install disc...but its a lot easier to go with IDE emulation.
I'm sure the computer notices the difference where AHCI comes into play but I don't notice so I just go the lazy route.

Often one can split the emulation, say ports 1-4 stay SATA and 5-6 can be switched to IDE emulation, so the optic drive would go into port 5 or 6 but you could still have AHCI SATA incorporated into the OS install on ports 1-4. Again, that's more complicated but more efficient for some I/O activities.
 

https://forums.techguy.org/threads/solved-bsod-when-trying-to-install-windows-xp-sp2.1057129/
Relevancy 41.28%

Hey,

Just wondering if anyone can help. Installed
I'm getting BSOD within a minute of startup of a fresh Windows 7 x64 Install.

I've tried changing RAM and a couple of other things.
I have as of yet not installed any programs, just updated my graphics card driver

I can boot into safe mode without a problem.
I can't see any hardware conflicts.

I am getting a IRQL_NOT_LESS_OR_EQUAL error on the BSOD.
I was also getting a Win32.sys error.

Any help would be greatly appreciated.

Attached are the 4 latest dump files.

Simon.

A:BSOD on fresh x64 Windows 7 Install

  
Quote: Originally Posted by nomis42


Hey,

Just wondering if anyone can help. Installed
I'm getting BSOD within a minute of startup of a fresh Windows 7 x64 Install.

I've tried changing RAM and a couple of other things.
I have as of yet not installed any programs, just updated my graphics card driver

I can boot into safe mode without a problem.
I can't see any hardware conflicts.

I am getting a IRQL_NOT_LESS_OR_EQUAL error on the BSOD.
I was also getting a Win32.sys error.

Any help would be greatly appreciated.

Attached are the 4 latest dump files.

Simon.




Simon

Hi and welcome

You have 3 distinct causes for these BSODs. First the directx portion of your video driver. The second is memory corruptoion, and the third are win 7 files

For the first I would completely remove the current driver and download a fresh copy. Install only the driver and not the rest of the things that usually get installed with them.

For memory corruption I would download memtestx86 burn it to a cd and run it for at least 5 passes.

For the win 7 files I would run a system file check
(type cmd in search>right click>sfc /scannow)

Let us know if you need more help

Ken


Code:
BugCheck D1, {fffff80001f02f50, 2, 8, fffff80001f02f50}
Probably caused by : dxgmms1.sys ( dxgmms1!VidSchiWaitForSchedulerEvents+1bc )
??????????????????????????????????????????????????????????????????????????????????????
BugCheck A, {a4400000000, 2, 0, fffff80002893317}
Probably caused by : win32k.sys ( win32k!SURFACE::Map+a1 )
??????????????????????????????????????????????????????????????????????????????????????
BugCheck A, {0, f, 0, fffff80002df6fde}
Probably caused by : pci.sys ( pci!PciReadSlotConfig+84 )
??????????????????????????????????????????????????????????????????????????????????????
BugCheck 4E, {99, 73a02, 0, 74282}
Probably caused by : memory_corruption ( nt!MiBadShareCount+4c )

http://www.sevenforums.com/bsod-help-support/85715-bsod-fresh-x64-windows-7-install.html
Relevancy 41.28%

I just got three 320GB Seagate drives setup in RAID 0 for Linux, and I decided to also reinstall Windows 8 on my SSD since it started lagging and running slower than normal. While trying to install Win8, right after selecting a disk/partition to install to, I got a BSOD about an error in a nonpaged area or something. When I tried to boot into the installer again, I got a BSOD immediately after the logo splashscreen (too quick to see what it was about). Does anyone know how to fix/bypass this?
-I'm booting the Windows 8 installer from a Corsair Survivor 64GB USB3.0 flashdrive. I'm gonna try a dvd with a different iso that I downloaded more recently on my laptop.

A:BSOD on Windows 8 fresh install

Try different media (CD/DVD or USB) and different ISO's
Try these free, bootable diagnostics: Initial Hardware Diagnostics

http://www.eightforums.com/bsod-crashes-debugging/32702-bsod-windows-8-fresh-install.html
Relevancy 41.28%

Hey there, I don't want to waste much of your time so I'll just list my issue:
Installed windows 7 Pro 64bit
Begun to have BSOD apparently caused by ntoskrnl.exe (About once a week)
Didn't happen once when I was using XP 32bit
Have tried updating drivers and uninstalling known incompatible softwares
Have been told Windows 7 doesn't like Radeon HD 5700 series and may be the cause
BSOD seems to occur spontainiously, even when the pc is idle
I'm told that this ntoskrnl.exe is actually a problem with bad memory although I doubted this as it only started happening right after installing Windows 7.
Latest dump file created
Screenshot of Minidump logs in BlueScreenView
My specs are in my profile

I very much appreciate your help, thank you! ;3

A:Frequent BSOD after install of Windows 7

Kernel Mode Trap 7F

Update ATK0110 ACPI Utility,

ASACPI.sys Mon Mar 28 05:30:36 2005
ASUSTeK Computer Inc.-Support-


If crashes persist, uninstall ZoneAlarm, replacing it with MSE:

http://download.zonealarm.com/bin/fr...cpes_clean.exe

http://www.microsoft.com/security_essentials/


Also update your Realtek Audio:

RTKVHD64.sys Tue Nov 03 13:39:55 2009
Realtek Audio (the latest version is August 2010)





Code:

Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [I:\102510-24008-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\websymbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Machine Name:
Kernel base = 0xfffff800`02c4a000 PsLoadedModuleList = 0xfffff800`02e87e50
Debug session time: Mon Oct 25 15:36:36.702 2010 (UTC - 5:00)
System Uptime: 0 days 2:42:49.717
Loading Kernel Symbols
...............................................................
................................................................
........................
Loading User Symbols
Loading unloaded module list
......
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 7F, {8, 80050031, 6f8, fffff80002c82ec0}

Probably caused by : ntkrnlmp.exe ( nt!KiDoubleFaultAbort+b2 )

Followup: MachineOwner
---------

2: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

UNEXPECTED_KERNEL_MODE_TRAP (7f)
This means a trap occurred in kernel mode, and it's a trap of a kind
that the kernel isn't allowed to have/catch (bound trap) or that
is always instant death (double fault). The first number in the
bugcheck params is the number of the trap (8 = double fault, etc)
Consult an Intel x86 family manual to learn more about what these
traps are. Here is a *portion* of those codes:
If kv shows a taskGate
use .tss on the part before the colon, then kv.
Else if kv shows a trapframe
use .trap on that value
Else
.trap on the appropriate frame will show where the trap was taken
(on x86, this will be the ebp that goes with the procedure KiTrap)
Endif
kb will then show the corrected stack.
Arguments:
Arg1: 0000000000000008, EXCEPTION_DOUBLE_FAULT
Arg2: 0000000080050031
Arg3: 00000000000006f8
Arg4: fffff80002c82ec0

Debugging Details:
------------------


BUGCHECK_STR: 0x7f_8

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

PROCESS_NAME: System

CURRENT_IRQL: 2

LAST_CONTROL_TRANSFER: from fffff80002cb9ca9 to fffff80002cba740

STACK_TEXT:
fffff880`02f69ce8 fffff800`02cb9ca9 : 00000000`0000007f 00000000`00000008 00000000`80050031 00000000`000006f8 : nt!KeBugCheckEx
fffff880`02f69cf0 fffff800`02cb8172 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiBugCheckDispatch+0x69
fffff880`02f69e30 fffff800`02c82ec0 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiDoubl... Read more

http://www.sevenforums.com/bsod-help-support/120434-frequent-bsod-after-install-windows-7-a.html
Relevancy 41.28%

I did an clean install upgrade to in install 7 BSOD Windows Solved: new Windows on my computer about a week and a half ago All the hardware is new except for the hard drive which is about four to five years old and was pulled from my old PC I ve been getting a blue screen error about every three days These have happened when the computer is idle at the desktop WhoCrashed reports the following from a minidump analysis -------------------------------------------------------------------------------- Analysis -------------------------------------------------------------------------------- Crash dump directory C Windows Minidump Crash dumps are enabled on your computer On Wed PM your computer crashed This was likely caused by the following module ntoskrnl exe Bugcheck Solved: BSOD in new Windows 7 install code x E xFFFFFFFFC xFFFFF E EC x x D F C Error KMODE EXCEPTION NOT HANDLED Dump file C Windows Minidump - - dmp file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System The crash took place in a standard Microsoft module Your system configuration may be incorrect possibly the culprit may be another driver on your system which cannot be identified at this time On Sun PM your computer crashed This was likely caused by the following module ntoskrnl exe Bugcheck code x xA A D C xB B EE F CA xFFFFF F x Error CRITICAL STRUCTURE CORRUPTION Dump file C Windows Minidump - - dmp file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System The crash took place in a standard Microsoft module Your system configuration may be incorrect possibly the culprit may be another driver on your system which cannot be identified at this time On Fri PM your computer crashed This was likely caused by the following module ntoskrnl exe Bugcheck code x xFFFFF AA D x xFFFFF AA D x Error PAGE FAULT IN NONPAGED AREA Dump file C Windows Minidump - - dmp file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System The crash took place in a standard Microsoft module Your system configuration may be incorrect possibly the culprit may be another driver on your system which cannot be identified at this time It seems that there could be a lot of potential causes for the computer crashing so I was hoping someone could point me to some specific solution or general idea of what I should do to fix it Thanks in advance nbsp

Relevancy 41.28%

? OS - Windows 7 Ultimate 64-Bit
? Original OS - Windows 7 Home Premium x64
? Purchased OS from retailer
? Age of System - 3 Years
? Age of OS installation - Reinstalled just 4 days ago

? CPU - i7-2630QM @ 2.00 GHz
? Video Card - nVidia GTX 460M
? MotherBoard - Asus G73SW Intel Laptop Motherboard s989 (0205A) 60-N3IMB1000-C08 69N0K9M10C08
? Power Supply - ASUS 19.5V 7.7A 150W POWER SUPPLY/ AC ADAPTER
? System Manufacturer - Asus

Happy New Years everyone! I hope everyone had a great year. I purchased this laptop I'm using (Asus G73SW) from a friend earlier this year and it has been more trouble than it's worth. Hopefully I followed all of the guidelines for the post. I included the PERFMON report, the BSOD Collection .html file, and a BlueScreenView document as well. Thanks for any help or suggestions you give me!

http://www.techsupportforum.com/forums/f299/bsod-after-fresh-install-of-windows-7-a-773170.html
Relevancy 41.28%

Hello

I have bought a new HDD for my laptop which had a mechanical fault. I have accidentally installed the 32bit version of Windows 7 on it, and now that I am trying to reinstall Windows, I get BSOD errors. All I need to know is weather if I wipe the disc completely (not using a Windows CD) is that going to allow me to freshly install Windows (unless of course there is a Hardware error). That is all I need to know and that's why I'm not posting the dumps.

The errors occur when after Windows loads files and says 'Starting Windows' after booting from a Windows CD. The errors I get are 0x000000F4 with the first CD and C000021a (0x00000001) with the other.

Thanks

A:Various BSOD codes when trying to install Windows 7

Only way to really find out whether wiping the drive will help is to go through with it. If you still have problems afterward, that would likely indicate a hardware issue.

Do you need steps to do a full format, or can you do so on your own?

Do you need steps for backing up data prior to wiping the drive?

http://www.techsupportforum.com/forums/f299/various-bsod-codes-when-trying-to-install-windows-7-a-672317.html
Relevancy 41.28%

Hi everyone I need help with a random BSOD on my computer Recently I ran into some problem with windows update on Windows just keeps on giving me error when trying to install security update Contacted microsoft support did a remote session but couldn't fix the problem So I decided to do a fresh reinstall of the OS Since I am doing that I also got myself a new SSD BSOD Random Install After Windows Installation of the OS went well without any problem But after the installation is finish it starts to have random BSOD with quot memory error quot in it When using Chrome it will also randomly gives me a quot Aw Snap quot error don't know if related didn't do that before I tried using the verifier standard all and it gives me a BSOD with the message quot Driver Verifier iomanager Violation HIDCLASS SYS quot Event Viewer gives me the following message Quote The computer has rebooted from a bugcheck The bugcheck was x c x xfffff c c d xffffcf cd xffffe a A dump was saved in C Windows Minidump - - dmp Report Id ef -b e- Random BSOD After Windows Install fec- - ebd a ceb I have attached the SysnativeFileCollectionApp zip I also tried to run a perform report but it just says quot Collecting data for seconds quot and stays like that forever Computer info Windows PRO x Upgraded from windows Did a fresh install afterward using ISO created using microsoft media creation tool Don't remember the exact name Just reinstalled the os about a week ago CPU AMD FX- Video Card MSI R - x Gaming GB Motherboard ASUS Crosshair V Formula-z Power Supply FirePower ZX W Home Built System Desktop

A:Random BSOD After Windows Install

Hi. . .

See if updating your Logitech Gamepanel driver helps -

Code:
LGVirHid.sys Fri Apr 24 17:20:53 2015 (553AB3B5)
http://sysnative.com/drivers/driver.php?id=LGVirHid.sys

It was named the secondary probable cause in 6 of the 9 dumps.

One dump mentioned the Microsoft file system driver ntfs.sys. This driver is usually seen when there is an issue with the HDD.

Run SeaTools for DOS, LONG test - https://www.sysnative.com/forums/har...agnostics.html

Be sure to check the SSD manufacturer's support site for a firmware upgrade. ** VERY IMPORTANT **

I've never heard of an "Aw, snap" error before, but found this at Google - https://support.google.com/chrome/answer/95669?hl=en

No need for the PERFMON report at this time.

Regards. . .

jcgriff2


Code:

Loading Dump File [C:\Users\PalmDesert\_jcgriff2_\dbug\__Kernel__\031116-10187-01.dmp]
Built by: 10586.103.amd64fre.th2_release.160126-1819
Debug session time: Fri Mar 11 16:00:56.586 2016 (UTC - 4:00)
System Uptime: 0 days 0:06:09.344
Probably caused by : ntkrnlmp.exe ( nt!RealSuccessor+37 )
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
BUGCHECK_STR: 0x3B
PROCESS_NAME: MsMpEng.exe
FAILURE_BUCKET_ID: 0x3B_nt!RealSuccessor
Bugcheck code 0000003B
Arguments 00000000`c0000005 fffff801`a7369cc7 ffffd000`816588f0 00000000`00000000
BiosVersion = 2201
BiosReleaseDate = 03/23/2015
SystemManufacturer = To be filled by O.E.M.
SystemProductName = To be filled by O.E.M.
??????????????????????????????????????????????????????????????????????????????????????``
Loading Dump File [C:\Users\PalmDesert\_jcgriff2_\dbug\__Kernel__\031416-12718-01.dmp]
Built by: 10586.162.amd64fre.th2_release_sec.160223-1728
Debug session time: Mon Mar 14 18:41:07.629 2016 (UTC - 4:00)
System Uptime: 0 days 0:38:49.446
*** WARNING: Unable to verify timestamp for LGVirHid.sys
*** ERROR: Module load completed but symbols could not be loaded for LGVirHid.sys
Probably caused by : HIDCLASS.SYS ( HIDCLASS!HidpMajorHandler+0 )
BUGCHECK_STR: 0xc9_220
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCKET_ID: 0xc9_220_HIDCLASS!HidpMajorHandler
Bugcheck code 000000C9
Arguments 00000000`00000220 fffff800`595624d0 ffffcf81`24f80d80 ffffe000`b37fe790
BiosVersion = 2201
BiosReleaseDate = 03/23/2015
SystemManufacturer = To be filled by O.E.M.
SystemProductName = To be filled by O.E.M.
??????????????????????????????????????????????????????????????????????????????????????``
Loading Dump File [C:\Users\PalmDesert\_jcgriff2_\dbug\__Kernel__\031416-12890-01.dmp]
Built by: 10586.162.amd64fre.th2_release_sec.160223-1728
Debug session time: Mon Mar 14 18:42:59.856 2016 (UTC - 4:00)
System Uptime: 0 days 0:00:47.676
*** WARNING: Unable to verify timestamp for LGVirHid.sys
*** ERROR: Module load completed but symbols could not be loaded for LGVirHid.sys
Probably caused by : HIDCLASS.SYS ( HIDCLASS!HidpMajorHandler+0 )
BUGCHECK_STR: 0xc9_220
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCKET_ID: 0xc9_220_HIDCLASS!HidpMajorHandler
Bugcheck code 000000C9
Arguments 00000000`00000220 fffff800`134b24d0 ffffcf80`f48a4d80 ffffe001`67f27220
BiosVersion = 2201
BiosReleaseDate = 03/23/2015
SystemManufacturer = To be filled by O.E.M.
SystemProductName = To be filled by O.E.M.
??????????????????????????????????????????????????????????????????????????????????????``
Loading Dump File [C:\Users\PalmDesert\_jcgriff2_\dbug\__Kernel__\031416-12953-01.dmp]
Built by: 10586.162.amd64fre.th2_release_sec.160223-1728
Debug session time: Mon Mar 14 18:01:43.512 2016 (UTC - 4:00)
System Uptime: 0 days 0:00:44.329
*** WARNING: Unable to verify timestamp for LGVirHid.sys
*** ERROR: Module load completed but symbols could not be loaded for LGVirHid.sys
Probably caused by : HIDCLASS.SYS ( HIDCLASS!HidpMajorHandler+0 )
BUGCHECK_STR: 0xc9_220
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCK... Read more

http://www.techsupportforum.com/forums/f299/random-bsod-after-windows-install-1104242.html
Relevancy 41.28%

Hi i'm french i will try my best to explain Sorry but i can't title more precisely due to the circumstance Actually I just reinstalled windows ultimate x hours ago format by the disc too and i had my first quot new quot bluescreen like mn after installed amd driver last one from happened just when i logged into steam Windows wasn't already setup to maintain the bsod screen at this point now its done Before maybe the new windows solve some but just in case it can maybe also help I reinstalled it cause i had random bluescreen with some sys or dll atikvmag which tend to be with the install windows new 7 again BSOD after fresh graphic card system corrupt some cleaner stuff said me i had a bitcoin stuff which can destroy some vital windows fonctions Sometimes i had bsod in the evening like no one doing the quot same thing quot youtube amp games for most not so much differents games i don't even remember having it while idle desktop or if i was idle there was something running youtube player for example Other quick example i used to crashed while having a lot of tabs with BSOD again after fresh new install windows 7 some youtube players yep i BSOD again after fresh new install windows 7 use a lot so BSOD again after fresh new install windows 7 after reboot chrome says me quot restore them quot i say quot do it baby quot which could result in a bsod I also can be freeze well i guess cause my usb stops no mouse keyboard i haven't check sound Or an application crashed i hit ctrl alt sup and all the time in this case it freeze the computer when i click on quot Task manager quot i can't access right clic in bottom in this situtation the explorer doesn't response to my actions I will post further bsod when they will come So here is my probably first zipfile

A:BSOD again after fresh new install windows 7

New one, i was starting a youtube video so my "Before" problems are still there

I missed i vital thing on my first zipfile, my windows 7 wasn't in sp1, trully sorry for that supid miss.. i though it was already done humm.

http://www.sevenforums.com/bsod-help-support/347653-bsod-again-after-fresh-new-install-windows-7-a.html
Relevancy 41.28%

Here's what I got:
Asus M5A88-M
AMD Phenom II X4 
AMD radeon HD 6900
8GB RAM G. SKill
 
I am currently running 32bit windows 7 totally fine. I'd like to install 64 bit. I put in the 64 bit CD and restart the computer and boot from CD. After the first load screen I get the Blue Screen that states "Page_Fault_In_NonPaged_Area". I did some googling and found that it could possibly be my RAM so I took 1 out and tried with 4GB with no such luck, and I did the same with the other with no such luck. I even did a format of the partition that i had windows installed on and ended up having to re-install windows 7 32bit. 
 
I'm new to this forum and this is my first computer that I actually built about a year ago. Any advice would really help me out.

A:Windows 7 32 bit to 64 bit BSOD when install CD is loaded

nevermind got it... my computer was overclocked. reset bios and done.

http://www.bleepingcomputer.com/forums/t/512300/windows-7-32-bit-to-64-bit-bsod-when-install-cd-is-loaded/
Relevancy 41.28%

Hello all,
 
you guys have helped me out once before on a different topic and now I need some help once more.
 
I am repairing a computer that had windows 8 installed on it but it had a BSOD. Figured it would just be easier to install Windows 10 and i was hoping that would solve my issues. 
 
Obviously that didnt work otherwise i wouldnt be here. 
 
So to the issue now, I am getting the first BSOD when i go to boot up the computer with the error code of 0xc00021a. the computer then restarts and gives me a different error code of 0xc00001. from the second error code i am able to get into the BIOS/UEFI screen but the CD/DVD option occasionally shows up to try and repair the OS.
 
Any help would be greatly appreicated
 
The computer is an ASUS D550-DS01 laptop
 
Thanks in advance

http://www.bleepingcomputer.com/forums/t/612377/2-bsod-on-a-clean-windows-10-install/
Relevancy 41.28%

Hello guys,

I have installed windows 8.1 Update 1 after lots of issues and now this update has become a nightmare now .I have been getting BSOD from them when I play some game (Steam Dota ) most of times was getting this BSOD

KERNAL DATA INPAGE ERROR ( volmgmrx.sys)

Please check my mini dump .

A:BSOD's after windows 8.1 Update 1 install

Please provide this information so we can provide a complete analysis (from the Pinned Topic at the top of the forum): Blue Screen of Death (BSOD) Posting Instructions Please use Option 1 as it provides Event Viewer logs.

If you ran the app previously, please let us know (as it didn't collect all of the needed reports).

Please make sure that you have ALL available Windows Updates. It may take multiple visits to get them all, so just keep visiting until it there are no more to be had.

The first BSOD is a cyclic redundancy check (CRC) checksum error.
The second BSOD is an error which specified a device which does not exist

As the STOP 0x7A error (Kernel Data Inpage Error) may have a hardware problem associated with it, I'd suggest that you start with these free diagnostics: Initial Hardware Diagnostics

Daemon Tools (and Alcohol % software) are known to cause BSOD's on some Windows systems (mostly due to the sptd.sys driver, although I have seen dtsoftbus01.sys blamed on several occasions).





Please un-install the program, then use the following free tool to ensure that the troublesome sptd.sys driver is removed from your system (pick the 32 or 64 bit system depending on your system's configuration): New link (15 Aug 2012): DuplexSecure - Downloads (pick the appropriate version for your system and select "Un-install" when you run it).
Alternate link: Disk-Tools.com
Manual procedure here: Registry and SPTD problems | DAEMON Pro Help



Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable! :

tap0901.sys Thu Nov 24 13:50:27 2011 (4ECE91F3)
TAP-Win32 Adapter V9 or[br]OpenVPN driver or COMODO
http://www.carrona.org/drivers/driver.php?id=tap0901.sys

Please note the drivers below that date from before the release of Windows 8.1 (17 Oct 2013) - check to see that each and every one is compatible w/Windows 8.1 (at the manufacturer's website). If not, you must either remove the device and it's software - or locate a Windows 8.1 compatible update on the web. Removing some drivers may make the system unstable - so if you're unable to find updates, post back for info on the one's that can/cannot be safely removed.


Analysis:
The following is for informational purposes only.

Code:
**************************Mon Apr 14 14:07:11.300 2014 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\041414-28156-01.dmp]
Windows 8 Kernel Version 9600 MP (4 procs) Free x64
Built by: 9600.16452.amd64fre.winblue_gdr.131030-1505
System Uptime:0 days 0:30:10.024
Probably caused by :ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+187d3 )
BugCheck 7A, {fffff6e000003a10, ffffffffc000003f, 11862d880, ffffc00000742018}
BugCheck Info: KERNEL_DATA_INPAGE_ERROR (7a)
Arguments:
Arg1: fffff6e000003a10, lock type that was held (value 1,2,3, or PTE address)
Arg2: ffffffffc000003f, error status (normally i/o status code)
Arg3: 000000011862d880, current process (virtual address for lock type 3, or PTE)
Arg4: ffffc00000742018, virtual address that could not be in-paged (or PTE contents if arg1 is a PTE address)
BUGCHECK_STR: 0x7a_c000003f
PROCESS_NAME: plugin-contain
FAILURE_BUCKET_ID: 0x7a_c000003f_nt!_??_::FNODOBFM::_string_
BIOS Version F6
BIOS Release Date 01/09/2014
Manufacturer Gigabyte Technology Co., Ltd.
Product Name GA-78LMT-S2
??????????????????????????????????????????????????????????????????????????????????????``
**************************Mon Apr 14 13:36:16.277 2014 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\041414-46000-01.dmp]
Windows 8 Kernel Version 9600 MP (4 procs) Free x64
Built by: 9600.16452.amd64fre.... Read more

http://www.eightforums.com/bsod-crashes-debugging/44553-bsods-after-windows-8-1-update-1-install.html