Windows Support Forum

Random BSODs on a newly assembled computer

Q: Random BSODs on a newly assembled computer

Hello there,
This is a brand new pc, I bought the parts and had a tech guy assemble and install everything for me. My problem is that either when I play or when I just am not doing anything the computer gives me a BSOD, sometimes it freezes although that rarely happens. I tried reisntalling windows but it did not work. I tried getting help on a forum and have been told it could be a HD issue so I bought a new one and the BSODing continued. I tested my mems with memtest and everything was fine also. I tried setting up the voltage a bit higher because of the RAMs to no avail. I was told after many BSOD minidumps that the problem was Ntoskrnl.exe but there has been no fix as of yet.

Relevancy 100%
Preferred Solution: Random BSODs on a newly assembled computer

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Random BSODs on a newly assembled computer

Hi Hatchling. You are having a wide range of bugcheck codes. No pattern is there. Which may indicate to something serious is going on there.

Install Service pack 1 and all other windows updates. Otherwise the system will remain vulnerable to threats.

Code:
Windows 7 Kernel Version 7600 MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Learn how to install Windows 7 Service Pack 1 (SP1)
Service Pack Center - Microsoft Windows

The network driver is causing issues there. Update the Realtek network driver from Realtek

The display driver, too. Install the NVIDIA DRIVERS 314.22WHQL only.
Uninstall All nvidia items in Control Panel > Programs and features3D Vision Control Driver
3D Vision Driver
Graphics Driver
HD Audio Driver
PhysX
nvidia Update
(Are you using nvidia chipset drivers? If so, dont uninstall anything other than those are listed).
Now follow Drivers - Clean Left over Files after Uninstalling
Boot normally now. Go to Drivers - Download NVIDIA Drivers, Download 314.22 WHQL. While installing, Select Custom (Advanced) install. In the next page, follow this settings:
Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.
Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

Stress test the CPU.
Hardware - Stress Test With Prime95

Is the computer hot? Report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy.

Check if the Power Supply Unit (PSU) supplying adequate power to the computer or not.
eXtreme Power Supply Calculator

Scan the system for possible virus infection with the following programs.
Anti-rootkit utility TDSSKiller
Windows Defender Offline
Seatool for dos: SeaTools | Seagate download
Burn it in a blank cd. boot from the CD, click on "Accept", wait for it to finish detecting the drives, then in the upper left corner select "Basic Tests", then select "Long Test" and let it run.
Let us know the results.

_________________________________________________________

Code:
BugCheck 34, {50830, fffff8800333f858, fffff8800333f0b0, fffff80002cb6c22}

Probably caused by : ntkrnlmp.exe ( nt!KxWaitForLockOwnerShip+12 )

Followup: MachineOwner
---------------------------------------------------------------------
BugCheck 3B, {c0000005, fffff80002d07c22, fffff8800a7b6150, 0}

***** Debugger could not find nt in module list, module list might be corrupt, error 0x80070057.

Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )

Followup: MachineOwner
----------------------------------------------------------------------
BugCheck 124, {0, fffffa800e37b028, b0800000, 40151}

Probably caused by : AuthenticAMD

Followup: MachineOwner
------------------------------------------------------------------------
BugCheck 1000007E, {ffffffffc0000005, fffff80002cffc22, fffff880009a99a8, fffff880009a9200}

Probably caused by : ntkrnlmp.exe ( nt!KxWaitForLockOwnerShip+12 )

Followup: MachineOwner
---------

http://www.sevenforums.com/bsod-help-support/306531-random-bsods-newly-assembled-computer.html
Relevancy 110.94%

Hello i just want to say that I am sorry if my post seems desperate and lacks quot procedures quot or information I am running out of patience unfortunately and i'm just exhausted on trying to find solutions newly on BSOD's assembled/installed Random computer To make it short I recently assembled my computer here are the specs MOBO Asus p z -V PRO CPU Intel i- k RAM x gb cl Gskill Ripjaw SSD Samsung gb OS Windows ultimate x HDD WD Caviar Black tb Heatsink Noctua NH-D PSU Antec HCP gold GPU MSI Random BSOD's on newly assembled/installed computer Radeon Twin FROZR I'm having ALOT of problems right now Most annoying and disrupting problem are the random BSOD's I downloaded Whocrashed and alot of crashes seem to be quot memory management quot Sometimes it's rd party programs maybe out of times today The BSOD lasts for a second and computer immediately reboots so it's hard for me to say what it was about I checked in event Random BSOD's on newly assembled/installed computer viewer the different errors but i'm at error warnings Another problem might be related is Random BSOD's on newly assembled/installed computer that everytime i boot up my computer and try to access BIOS ASUS EZ mode the EPU mode seems to be on It always resets to energy saving mode i dont know why Even after i change it to performance mode or normal mode it goes back to energy saving mode When i'm in windows and access the AI Suite II Mobo program the specs are NOT in energy saving mode Also on my mobo i have physical switches ePU and TPU The TPU switch is turned on right now because I tried overclocking the computer with the AI Suite II to see if it would change anything But that switch hasnt always been on At first it was EPU switch ON then both off then TPU on Nothing changed I have a feeling it might be linked to the RAM At one point as i was downloading Leagues of Legends game and Crysis from Origins while my uTorrent was actively downloading and Firefox was opened i got an error from uTorrent saying quot windows ran out of memory quot What do I do My computer keeps randomly crashing and i've been looking online for solutions it's just too complicated for me to find anything related to my problems Oh and on top of that trying to install Office i get an error x access denied Says I dont have permission to do whatever it's trying to do The BSODS often occur on a reboot of the computer after installing uninstalling a program Right after entering my user password seconds into loading desktop it immediately crashes Not always but i've noticed it happens often I'm also getting errors from installing other programs but those are very minor problems compared to this one What do you need me to post here Thank you very much for your help

A:Random BSOD's on newly assembled/installed computer

Heres the Perfmon , the autorun and the Echo zip file

http://www.techsupportforum.com/forums/f299/random-bsods-on-newly-assembled-installed-computer-683552.html
Relevancy 100.19%

Hello everyone I've got some new hardware and assembled it freezes Random com on assembled newly into a new pc Here are my specs i Random freezes on newly assembled com k not overclocked yet RAM DDR Corsair Vengence Corsair AX gold ASROCK extreme gen mobo GTX msi lightning gb vram H corsair water cooling Western Digital Caviar Black TB Windows bit So my problem goes like this My computer will run fine when surfing the web or reading articles or posting in forums like tom's hardware It happens sometimes when i surf youtube videos or listen to music It also happens when i play games like skyrim and warcraft Dota So far there's no problems with battlefield yet The problem is something like this Music playing fine then suddenly the speakers went fuzzy and there's a kind of a wub wub wub sound then after about a sec or so it resumes fine Computer during that time frame will freeze up but it resumes normal working status after that second During skyrim the computer will freeze and have the same Random freezes on newly assembled com wub wub sound emanating from the speakers Drivers all are up to date by updating from the device manager screen Ran hardware monitor and its not my cpu overheating Idle temps are around degree celsius I live in singapore Load temp max is at or so when running BF and prime This problem happens occasionally and its really making me worry if there's anything wrong with the system I would appreciate any assistance regarding this issue Thank you Sincerely Gawain

A:Random freezes on newly assembled com

Start with testing your memory
it is weird that BF3 will run fine yet skyrum and other games will freeze on you

Memtest86+ - Advanced Memory Diagnostic Tool

make sure to test each stick of RAM individually
atleast 11 passes

http://www.techsupportforum.com/forums/f299/random-freezes-on-newly-assembled-com-619450.html
Relevancy 90.3%

The computer crashes every few minutes. I think I've seen multiple BSOD messages, but the one in the current configuration appears to be 3D. When I say "current configuration, I mean that I've tried all sorts of combinations of parts and driver disabling and can't stop the crashing. Here's what I've tried:

New hard drive
remove promise technology card
remove intel pro 100 card
disable every driver in device manager I can disable.
Fresh install of Windows 7

Right now I've re-enabled most of the drivers, since disabling had no effect, but I haven't replaced the cards i removed. I may not put them back in, since they probably aren't needed.

I have two hard drives inside, attached to mobo with esata cables.

Thanks to all who make this site so awesome!

A:Newly assembled computer crashes every 30 minutes error 3b latest?

First of your bios is way old .... try updating this from the manufacturer site ... along with all other drivers .... they have update to them..... you can find it here

Second .... some of BSOD is caused by USBport.sys, one of them by explorer, few by filesystem error... So the best way to go from here is to first update all the driver... then update windows...

Thirdly you system has shutdown even at high temperature.... like at 99.85 deg C... Are you sure you put the thermal paste on the processor properly ?/?? or has the processor fan properly been locked to the motherboard....????

Check these and let us know

http://www.sevenforums.com/bsod-help-support/245554-newly-assembled-computer-crashes-every-30-minutes-error-3b-latest.html
Relevancy 80.84%

Hallo I have just recently bought parts for my new computer but sadly there is a problem When I assembled the computer and powered it up bios just woudn t load up The power is ok W the fans on graphic card and on the processor are running and I just don t know what it could be wrong The components are - Radeon HD link http www gigabyte com products product-page aspx newly assembled with Problems PC pid ov - Gigabyte GA- XA-UD link http www gigabyte com products product-page aspx pid ov - AMD FX- link http www newegg com Product Product aspx Item N E - Corsair Vengeance x GB MHz link http www corsair com memory-by-pr hannel-ddr -memory-kit-cmz gx m a c Problems with newly assembled PC html - ssd crucial m gb link http www crucial com store partspecs aspx IMODULE CT M SSD When i saw that there is zero responce on screen the s a message that there is no signal I also tried with just ram stick tried tothe of them in different slots I would greatly apreciate your response Regards nbsp

Relevancy 79.98%

Hi all, I recently built a new PC consisting of an Asus A7N8X-E mobo and an AMD 2600 CPU, 512mb ram, a radeon 9600 vid card and a HDD i had lying around. I started to onstall XP Pro but got about 30% through the file copying process and got an NTFS problem. I tried a FAT32 partition but got the same problem. Any suggestions?
 

A:Newly assembled PC refuses to install XP Pro...

fill in your "User Profile", top left an any page.
Also, what size is the HD and what size the partition(s)?
 

http://www.techspot.com/community/topics/newly-assembled-pc-refuses-to-install-xp-pro.18673/
Relevancy 79.98%

Hello SF
I've just assembled a pc using different parts from old computers. For some reason my pc will turn on, but my screen just stays black. I've tried several graphic cards, nothing. How do I determine if its really the motherboard failing without a screen ?

A:Newly assembled screen problem

First (obviously) you test the monitor and cable on another system.

No video can be caused by a bad video card, bad RAM, incorrectly installed CPU, incorrect BIOS setting, power supply, and finally MB.

You want to do some diagnostic tests to try and zero in on which component is the problem one. As you do the following diagnostic tests you should take the time to reseat the components carefully and double check all of your electrical connections.

The Test:
Basic diagnostic procedure is to uninstall the entire build and start over. Some people do this out of the case by placing the motherboard on an anti-static surface. This eliminates the possibility that there is a short circuit between the motherboard and the case through the connection posts (stand-offs). A standoff in the wrong location or a sloppy job will cause a short.

The Test (power off, power cord unplugged):
Disconnect everything externally connected except the mouse and keyboard (printers, USB devices, etc). If you are not using a wired mouse and keyboard see if you can borrow one. The wireless device is just another component you have to deal with.
Disconnect the power and data cables from all the drives inside the computer (Hard drives, DVD/CD drives, etc).
Remove all the cards installed in the expansion slots (PCI/PCI-e) including the video card. (Be careful handling them and place them on a non conductive surface while testing).
Remove all the RAM sticks (same rules as above).
Now connect the power cord and turn the PC on.
The motherboard should start beeping. You should get a beep code that tells you there is no memory. This is good, it means the processor is functioning and the motherboard is good so far.
Now add one stick of memory in Slot A1 and power on. More beeping: "no video card" beep code. This is good.
Then add the video card and connect it to the monitor. You should get no beeping and you should see the BIOS start screens, ending with the message that there is no boot device.
If you get no video then switch the one memory stick installed for another one and test.
If you do get video then start adding components back, one at a time, until the system fails to boot. The last component you added is then the problem component.

http://www.sevenforums.com/hardware-devices/208334-newly-assembled-screen-problem.html
Relevancy 79.98%

Hi Sorry to give you trouble with my long e-mail I have some problem with a P PC I am trying to put up stuck with the same problem Can't In Newly System Install Os A Assembled Win P4 for the last months Could you please tell Can't Install Win Os In A Newly Assembled P4 System me what kind of memory is compatible with P Gig pin motherboard I have tried with two different ECS Group P IBMS micro atx MB and a p Atx Sapphire MB When I tried to boot from win bootup disk after partitioning on a new Maxtor New HD when formating it freezes after the format completed and when writing file allocation table at zero percent Another Gig maxtor drive also was tried but same problem Also tried booting from win win and win XP CDs In all cases it freezes after loading all the windows files and when it goes to copying to the windows folder it freezes But then it goes thru the formating ok I tried FAT and NTFS formating Tried the setup several times It must be the problem with the processor or Memory most probably it is the memory How can I be sure Could you tell me what memory is tested on p so that I can buy the right memory I have memory chips tested in this P all MB PC They all worked on systems with AMD K processors Is there any way to isolate it a memory or processor problem In this P both memory and processsor being registed by the system properly Thank you for your time and cooperation bbst nbsp

Relevancy 79.12%

So I assembled a computer with friend today everything seems to be at the right spot at post it beeps hdd spins all fans turn and lights LED and such goes on Only problem is that my monitor just refuses to show signals Here is my computer specs Ultra w X-Finity Power Supply w mm i am pretty sure this psu is good enough Creative Labs Sound Blaster Audigy SE monitor. says Newly assembled no comp- signal Corsair TWINX MB PC DDR MHz E P P so two cards BenQ FP GX IN LCD MS ALOG DVI BLK Monitor lt --DVI-D does not show signal NZXT Apollo Blk ATX Mid-Tower Case w Clear Side Intel Core Duo E Ghz M FSB Socket XFX GeForce GTxxx MB DDR PCIe w Dual DVI Seagate GB MB SATA- Hard Drive Sony DRU C x Newly assembled comp- no signal says monitor. DVD RW Burner ASUS P N-E SLI motherboard I plugged the monitor through AGP on my other computer and it runs fine but when i switch Newly assembled comp- no signal says monitor. to DVI on the new computer it just doesn t detect signals anything wrong here One more thing is that my dvd burner does no ejected when connected through IDE to Newly assembled comp- no signal says monitor. motherboard it ejects when its not connected to anything except power Help nbsp

A:Newly assembled comp- no signal says monitor.

Try and reset the CMOS (Bios) on the motherboard. Make sure the bios is set to PCI for video
 

http://www.techspot.com/community/topics/newly-assembled-comp-no-signal-says-monitor.68816/
Relevancy 78.69%

So ever since I have built my new computer I have been getting this f4 bsod and I have no clue whats causing it. I have done the steps listed below but I still get it.

PC Specs:
Intel I7 4790k
GTX 970 ssc
MSI Z97S Krait Edition motherboard
Corsair vengeance 16gb ram
Samsung 850 evo 250gb ssd
WD blue 1tb hd

What I have done:
Updated all drivers
Checked ssd driver and it is fully up to date
Ran memtest 86 on ram and got no failures
Ran windows memory diagnostics and got no errors
Ran check disk on both ssd and hdd and got no errors
Changed sata cables on both my ssd and hdd
Ran driver verifier
Ran malwarebytes to check for malware and viruses

I have attached the zipped folder from dm log collector and the minidumps of the f4 bsods.

A:Random F4 bsods on newly built pc

Something is crashing both winint and csrss processes on the system. Given they both have very different purposes in life, the likelihood is you have a driver that's causing issues if the hardware tests out OK. Unfortunately with minidumps, there's little information available (in this case it's an access denied/access violation, as far as can be told, but nothing further) to use to troubleshoot. In the case of an F4, we'd need a kernel dump to gather what's going on with any level of certainty. However, I'd start with upgrading all of the drivers in the system (which you've said you've already done), making sure the machine is fully patched, and then configure the machine for a kernel memory dump (not a minidump). Note you'll need a paging file that's approximately 4GB in size on the Windows volume to make sure you can capture a kernel dump the next time a crash occurs.

http://www.sevenforums.com/bsod-help-support/372378-random-f4-bsods-newly-built-pc.html
Relevancy 77.83%

Hi guys I have on BSODs Random Seemingly built PC newly just put together my third build and I'm Seemingly Random BSODs on newly built PC running into problems CPU Intel Core i - K GHz Quad-Core Processor Motherboard ASRock Z Extreme ATX LGA Motherboard Memory Patriot Viper GB x GB DDR - Memory Storage Samsung Seemingly Random BSODs on newly built PC EVO GB quot Solid State Drive Storage Western Digital Caviar Blue TB quot RPM Internal Hard Drive Video Card EVGA GeForce GTX GB Dual Superclocked ACX Video Card Case NZXT H Red Black ATX Mid Tower Case Power Supply XFX ProSeries W Gold Certified Fully-Modular ATX Power Supply Operating System Microsoft Windows OEM -bit CPU Cooler Kraken x A week or so ago I installed windows on the SSD set everything up I had some issues with windows detecting the HDD but once I installed all the motherboard drivers new bios etc everything seemed good Unfortunately I started hitting random BSODs quite frequently each time a different type I got frustrated so I re installed windows and did a more patient and methodical install of the drivers and software Tonight I got around to installing the remaining motherboard drivers as well as a few of my apps things like Chrome Dropbox Evernote as well as GPU drivers Audio drivers etc TONS of bsods My SF Diagnostic Tool Log https dl dropboxusercontent com u SF - - zip If interested Here is my speccy snapshot http speccy piriform com results U mkAfHOEShVxAcvz rKwO

A:Seemingly Random BSODs on newly built PC

Hi guys, I REALLY need your help.

As I predicted, the wide variety of BSODs have begun in earnest. Mostly just browsing the web, I have not even installed any of my main productivity apps or any games.

So far in the last several hours I have run into several different BSODs including:

System_Service_Exception
Memory_Management
PFN_List_Corrupt
Unexpected_Kernel_Mode_Trap

Is it possible the z97 board is simply too new and doesn't have the proper driver support yet? I can't understand how else I would be getting different BSODs each time.

I would be happy to send in new logs or files to anyone who would be able to help.

http://www.eightforums.com/bsod-crashes-debugging/47476-seemingly-random-bsods-newly-built-pc.html
Relevancy 76.11%

Hello all As the title says I've been having random BSODs built BSODs all inside details on Random newly machine, on my newly built machine Mostly happens on startup can't get passed the Windows Splash screen when Random BSODs on newly built machine, all details inside it blue screens All voltages check out in the BIOS and memtest returns negative I'm running a fresh genuine installation of Windows Pro w Windows Security Essentials Below are my system components and attached are my dump files Memory G SKILL Sniper Series GB x GB Newegg com - G SKILL Sniper Series GB amp Random BSODs on newly built machine, all details inside x GB amp -Pin DDR SDRAM DDR amp PC amp Desktop Memory Model F - CL D- GBSR CPU Intel Core i Random BSODs on newly built machine, all details inside Newegg com - Intel Core i - K Ivy Bridge GHz amp GHz Turbo amp LGA W Quad-Core Desktop Processor Intel HD Graphics BX I K Motherboard ASUS Maximus V Gene Newegg com - ASUS Maximus V Gene LGA Intel Z HDMI SATA Gb amp s USB Micro ATX Intel Motherboard Videocard EVGA G-P - -KR GeForce GTX GB -bit GDDR Newegg com - EVGA G-P - -KR GeForce GTX GB -bit GDDR PCI Express x HDCP Ready SLI Support Video Card Thank you

A:Random BSODs on newly built machine, all details inside

Hello jhonnysweep.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 50, {fffff8a0011e73a8, 0, fffff80002f66ec9, 2}
Could not read faulting driver name
Probably caused by : dxgkrnl.sys ( dxgkrnl!MonitorInitializeGlobal+120 )

Followup: MachineOwner
---------
Your crash dumps are not showing any finite probable cause. In such a situation, it is better to enable Driver Verifier to monitor the drivers.

Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

Let us know the results, with the subsequent crash dumps, if any.

Edit:






  
Quote: Originally Posted by jhonnysweep


Mostly happens on startup, can't get passed the Windows Splash screen when it blue screens.


Uninstall Daemon Tools and see if the situation changes or not. * Do it first.

http://www.sevenforums.com/bsod-help-support/264855-random-bsods-newly-built-machine-all-details-inside.html
Relevancy 76.11%

I just assembled a new computer with a brand new CPU Motherboard and new ram with gigabytes Computer computer random new assembled shutdown, of space At first when my operating system had bit it took a while and then the computer would randomly turn off by itself but I didn't notice because i wasn't there Then I installed bit and it went well for a while I installed Steam Skype and restored a Minecraft server I've been hosting and installed a game Tomb Raider So I finished installing Computer random shutdown, new assembled computer Tomb Raider and booted it up and the computer randomly shutdown out of nowhere I tried booting it back up and it shut down once it reached the desktop and continued doing this despite me moving to different power sources around the house with the computer I believe that I have a bad PCU It holds watts and i am thinking of jumping up to watts Am I doing the right thing or is there some other reason its shutting down at desktop

A:Computer random shutdown, new assembled computer

Three things come to mind right off the bat:
Heat sink not installed properly
Power supply issues
RAM timing issues (set in BIOS)
Regards,
GEWB

http://www.sevenforums.com/general-discussion/304201-computer-random-shutdown-new-assembled-computer.html
Relevancy 71.81%

My new computer has been having many stop messages which have prevented me from installing the drivers. (0x0000008E, 0x0000007E, and 0x00000050 were the last three I remember)
These BSODs always happen when I am working with my sound card/driver.
Also, my sound driver has the error "Device cannot start (CODE 10)" and I get no sound from it. One time, I managed to get sound but a blue screen showed up for a second and when my my computer restarted, the sound was broken again.
I put together this computer with my friends, we're relatively inexperienced so the problem might be with the placement of the hardware.


Thanks for any help that anyone may give me

A:Many different BSODs on my newly built Computer

Please list your full system specs.

These errors indicate a problem with ram or a add in card among other hardware problems.

Start with the sound card, remove it from the system and see if the bsod's stop

Have you ran the motherboard cd and installed all the drivers?

http://www.techsupportforum.com/forums/f10/many-different-bsods-on-my-newly-built-computer-182009.html
Relevancy 70.95%

So, I have recently built a new computer over the holidays and I am running into some issues with BSODs. I am trying to narrow down the culprit and resolve the issues. Initially, the main problem I was having was with my XFX Radeon 5770, but XFX has released updated drivers. I have updated all my drivers... that I know of, but I am still getting BSODs. I have included the most recent BSODs so someone could take a look and maybe shed some light on my issues. Any help or suggestions would be greatly appreciated.

A:Window 7 x64 BSODs on newly built computer

  
Quote: Originally Posted by jl3nz


So, I have recently built a new computer over the holidays and I am running into some issues with BSODs. I am trying to narrow down the culprit and resolve the issues. Initially, the main problem I was having was with my XFX Radeon 5770, but XFX has released updated drivers. I have updated all my drivers... that I know of, but I am still getting BSODs. I have included the most recent BSODs so someone could take a look and maybe shed some light on my issues. Any help or suggestions would be greatly appreciated.



Hello Welcome to SF,

I guess it's pointing to a Core Windows driver Cryptography Next Generation (cng.sys)


CNG provides a set of APIs that are used to:Perform basic cryptographic operations, such as creating hashes and encrypting and decrypting data.
Create, store, and retrieve cryptographic keys.
Install and use additional cryptographic providers.
So long story short its related to your security. More info refer this link Cryptography Next Generation

Run the Memory Diagnostic & HD Diagnostic.

Download Malwarebytes and run a complete scan


PAGE_FAULT_IN_NONPAGED_AREA (50)





Quote:
Invalid system memory was referenced. This cannot be protected by try-except,
it must be protected by a Probe. Typically the address is just plain bad or it
is pointing at freed memory.
Arguments:
Arg1: fffff800009ea060, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffff80003067b5c, If non-zero, the instruction address which referenced the bad memory
address.
Arg4: 0000000000000000, (reserved)





Hope this helps,
Captain

http://www.sevenforums.com/bsod-help-support/67896-window-7-x64-bsods-newly-built-computer.html
Relevancy 69.66%

Hello I recently just got my new computer in a bundle and assembled it together It was running great with no problems for first week But then the infamous BSOD found it s way to my monitor And not just once it s nearly a BSOD rate when I start up my computer I don t know what I did the first time but I did something to where it decreased the amount of times I saw the BSOD Although it was too much to handle again and I reformatted Reinstalled windows and everything This was last week Here I am again with built 7 multiple 64-bit Windows with computer BSODs. Ultimate Newly same problems There are BSOD s with stuff like x e STOP x and STOP x A PAGE FAULT IN NONPAGED AREA seems to appear as well I m guessing this is a memory fault or Newly built computer with multiple BSODs. Windows 7 Ultimate 64-bit hardware issue I keep reading up on other people with these problems and how they were guided to fix it but it s not quite working completely for me I appreciate the help ASUS P H -M Pro Motherboard Intel R Core TM i CPU GHz Mhz Core s Logical Processors BIOS Version Date American Megatrends Inc SMBIOS Version G SKILL Ripjaws Series GB x GB -Pin DDR SDRAM DDR PC Desktop Memory Model F - CL D- GBRL Installed Physical Memory RAM GB Total Physical Memory GB Available Physical Memory GB Total Virtual Memory GB Available Virtual Memory GB I hope all this helps nbsp

A:Newly built computer with multiple BSODs. Windows 7 Ultimate 64-bit

0x8E errors are almost always caused by hardware; 0x50 and 0xA errors both have hardware possibilities as well as drivers and software.

Your motherboard is an Asus and they make great motherboards but they are also quite well known for being picky about what RAM is installed on each and every board model they make. So much so that they create a Qualified Vendors List (by no means exshaustive) for memory per board. So...

1. Is your particular G.Skill Ripjaws on that list?

2. Have you tried running with just 4 gigs?

3. Check the BIOS and see what the memory voltage is set at. Is it set according to G.Skill's specs? If not do so manually.

4. Have you run memtest on your memory to check for corruption?
 

http://www.techspot.com/community/topics/newly-built-computer-with-multiple-bsods-windows-7-ultimate-64-bit.147861/
Relevancy 65.79%

Dear Tech Support,

Two weeks ago I build a computer for my friend, but it keeps getting random blue screens. Blue screens can occur multiple times a day.

I could not find what is causing the blue screens or fix it.

The blue screens happen at random times.
Its a clean install of Windows 7 retail,
All drivers on the PC are the Latest ones on the manufacturers site and I have the latest direct x installed.

I tried reinstalling windows, but that didn't help either

System Specs:
Intel Core i5 650
MSI H55M-E33 Motherboard
GeIL Value Dual Channel Kit 1333 hz 2x 2GB (4GB Total)
ASUS EAH4870/2DI/1GD5

I will attach the blue screens from before and after the New install

If i need to add any other information please say so.

Thanks in advance,
Stefan Dinkelberg

A:Random bluescreens on a newly build computer

What rating power supply did you use?
A 650W minimum should be ok there, less than 650W and
you may have problems.

Without reading those dump files, many random problems
can be caused by poor quality memory.

http://www.memtest.org/

Download a bootable ISO of memtest and run a memory test for
a couple of hours.
If tests fail, swap memory modules and see if that helps.
Check there's no grease or fingerprints on the gold contacts
as well.

Also, go through the motherboard BIOS, check no settings have been
change or overclocked byyour friend, hope that helps.

http://www.techsupportforum.com/forums/f299/random-bluescreens-on-a-newly-build-computer-507887.html
Relevancy 65.79%

Just built a new computer and it ran great for about a week or so.

ASUS P5K-V LGA 775 Intel G33 ATX Intel Motherboard
GeForce 8600GTS 256MB 128-bit GDDR3 PCI Express x16
Rosewill RX950-S-B ATX Power SupplyIntel core 2 quad q6600
OCZ (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 1066
320GB 7200 RPM 16MB Cache SATA 3.0Gb/s Hard Drive

also running Windows XP Professional with sp2

the computer is randomly restarting while in Windows, while loading the OS, while going through the normal boot process, and even restarted once while in the bios. No blue screen or anything. any idea on what it might be?

EDITED:
Can't currently post a link but here's the info:
w3.newegg.com/Product/Product.aspx?Item=N82E16817182096
Rosewill RX950-S-B ATX 12V v2.2 & EPS 12V v2.91 950W Power Supply 100 - 240 V TUV, FCC, UL, CE, ROHS
i must have cut some things out when i posted
 

A:Random Restarts on newly built computer

Rosewill RX950-S-B ATX ??? Never heard of it. With the specs of your rig, your PSU is about the second most important component (after cpu).
Can you give us the spec of this psu? Amps on each Rail (12V, 5V) and over all wattage please.
 

http://www.techspot.com/community/topics/random-restarts-on-newly-built-computer.94387/
Relevancy 65.79%

So i've gotten these weird random bsod's sometimes after i upgraded my computer with a new motherboard, new cpu, new ram and a brand new install of windows. I've only had them right after i've turned on my computer or right after i've had my computer in sleep mode. Usually right after opening skype and mozilla firefox which is one of the first things i do when i fire up my computer. I didnt have a single one yesterday though, and i used my computer for hours, just gaming and doing regular stuff like music and such, no problems at all. But when i turned it on this morning, i got one.
This is really all i can say for now, i'm not doing anything special when i get them, they just kinda come out of nowhere. Hope i can find some help here. I've used the diagnostic tool and included the rar file.

Thanks in advance.

A:Random BSOD on newly upgraded computer

Hi,

Your logs are pointing to your Ati Video drivers:


Code:

*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 1000007E, {ffffffffc0000005, fffff8800575fe35, fffff880027ab238, fffff880027aaa90}
Probably caused by : atikmdag.sys ( atikmdag+10ce35 )
Followup: MachineOwner
---------
2: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e)
The SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M bug check has a value of 0x1000007E. This indicates that a system thread generated an exception which the error handler did not catch.


Code:
Driver: atikmdag
Dated: Fri Mar 29 02:27:04 2013 (5154FBF8)
Refers to: ATI Video driver
See if an update is available:

Support & Drivers
(only install the Display Driver)

Remove Avast from your system and as an alternative:

Microsoft Security Essentials.
Recommended from a strict BSOD perspective, compatibility & stability
compared to other antiviruses/internet security software.

Microsoft Security Essentials - Microsoft Windows


   Note
Once downloaded, update and run a full system scan


Cheers

Dave

http://www.sevenforums.com/bsod-help-support/290372-random-bsod-newly-upgraded-computer.html
Relevancy 61.49%

I am planning to assemble my first computer and i seriously need some expert advice.
I would need some recommendations for the following part:

>Motherboard (preferably Gigabyte or Asus)
>CPU (preferably Intel i7)
>Graphic card (preferably Asus)
>RAM
>DVD drive
>Hard Drive
>Power Supply (incl. min 3 SATA connections)

With other words, all i got is the tower computer case.
Please tell me if i have mixed up the terms.
 

https://forums.techguy.org/threads/my-first-self-assembled-computer.856053/
Relevancy 60.2%

Okay well i posted this thread on toms hardware but i haven't gotten a solution yet I've recently assembled my pc and everything seemed to be working fine But one day my pc was frozen on the window menu I hard to forceably turn off my pc computer Assembled crashes and but freezes computer and restart it When i turned it back down my pc would turn on and off repeatedly until it finally turned on for good When my computer freezes my keyboard mouse and headset Immediately turns off basically anything connected to the mobo So i'm guessing is a mobo problem here are my specs OS window MOBO Asus P x WS CPU intel i k ghz GPU Assembled pc but computer freezes and crashes x ti's Ram Corsair Dominator gb mhz x gb PSU Corsair AX i Hardrive tb Seagate SSHD I've enabled XMP to run the ram at recommended settings and disabled it both options didn't solve the problem It happens randomly it could be on running fine for - hours but out of no where the computer freezes acts wild shuts itself off and on by itself Any help

A:Assembled pc but computer freezes and crashes

We will get it all good for ya. No problems. All I need to see is what Brink says to attach to a post:

Blue Screen of Death (BSOD) Posting Instructions

In addition, please provide a screenshot of CPU-Z Memory tab, and one each of the SPD tab for each stick of RAM you have.

If you did not install proprietary drivers for your storage from the manufacturer's website, that would be a good idea to do so now.

http://www.eightforums.com/bsod-crashes-debugging/39371-assembled-pc-but-computer-freezes-crashes.html
Relevancy 59.34%

For 3 days now I have been getting random blue screens (photos attached in BSOD.zip), all related to RAM. Today after a crash I ran a 1-hour long Memtest86+ and found absolutely nothing wrong (completed the whole process twice). Thought it may be the HDD and pagefile (why not ) and ran a chkdsk, nothing wrong. At first, I crashed only while compiling in Visual Studio (Ultimate 2013) and it happened 30 minutes or 5 hours after beginning to code. Having seen other's PCs crash due to compiling (not VS necessarily), I did not worry. Just now I had a crash and I hadn't even started VS in this session, which was a troubling thing. I really can't put my finger on it. Any ideas?

A:Random BSODs while using computer

Getting a few mixed responses.


Code:
BugCheck 1A, {41790, fffffa800232a460, ffff, 0}

Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+35084 )
I'm seeing Page Table Entry corruption, most likely drivers.
Here's why:

The 1st parameter indicates page table entry corruption.
The 2nd parameter is the address for the Page Frame Number that represents the corrupted page table.
The 3rd parameter contains the amount of page table entries in use at the time of the crash.


Code:
1: kd> dt nt!_MMPFN fffffa800232a460
+0x000 u1 : <unnamed-tag>
+0x008 u2 : <unnamed-tag>
+0x010 PteAddress : 0xfffff6fb`40000ed8 _MMPTE
+0x010 VolatilePteAddress : 0xfffff6fb`40000ed8 Void
+0x010 Lock : 0n1073745624
+0x010 PteLong : 0xfffff6fb`40000ed8
+0x018 u3 : <unnamed-tag>
+0x01c UsedPageTableEntries : 0xffff
+0x01e VaType : 0 ''
+0x01f ViewCount : 0 ''
+0x020 OriginalPte : _MMPTE
+0x020 AweReferenceCount : 0n128
+0x028 u4 : <unnamed-tag>
Indeed the 3rd parameter was correct, in fact there are less than zero page table entries which is most likely caused by a driver calling the MmUnlockPages function too many time which causes physical pages to be unlocked.

However, on the other hand you are also getting Working Set page corruption which is mainly caused by bad RAM.


Code:
1: kd> !wsle 2

Working Set @ fffff70001080000
FirstFree 289f FirstDynamic 5
LastEntry 289e NextSlot 5 LastInitialized 296e
NonDirect 0 HashTable 0 HashTableSize 0

Reading the WSLE data ......Unable to get Wsle table block - address fffff70001081088 - count 1024 - page 0x180
Lets take a quick look at the raw stack...

Hmm a few I/O routines and Interrupts.

Avast is causing issues.

Code:
Unable to load image \SystemRoot\system32\drivers\aswMonFlt.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for aswMonFlt.sys
*** ERROR: Module load completed but symbols could not be loaded for aswMonFlt.sys
aswMonFlt+0x2155
Remove it using the removal tool

I'd give Memtest86 a try as well.

Memtest86 will test your RAM



   Information

Run Memtest86 for at least 8 passes so we get enough information to confirm that your RAM isn't failing

Lastly I noticed you had this installed...


Code:
DAEMON Tools Pro Agent "c:\program files (x86)\daemon tools pro\dtagent.exe" -autorun DAVID-PC\DAVID HKU\S-1-5-21-274158315-4080150620-116267909-1000\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
Daemon Tools/Alcohol is known cause of BSODs.

Registry and SPTD problems | DAEMON Pro Help
How to remove sptd.sys from system

1. Uninstall Daemon Tools.
2. Download the SPTD standalone installer and follow these steps:
3. Double click the executable to open it
4. Click the button shown below

If the button it is grayed out, as shown in the image, there is no more SPTD installation on your system, and you can just close the window.
Free your startup, remove all unnecessary programs from launching when you first login.

Startup Programs - Change

Post back the results.

http://www.sevenforums.com/bsod-help-support/333074-random-bsods-while-using-computer.html
Relevancy 59.34%

Hi I recently built a new computer it's my first time and all seemed well but I had some issues whilst installing Windows onto it there were some driver issues with sata raid controllers missing this was fixed after I format my harddisk The issue now is Windows constantly keeps bluescreening It lasts maybe minutes and or lasts minute it happens regardless of what I am doing just randomly occurs The pc specs are Corsair Force GT GB SSD A western digital TB harddisk which I have currently disconnected as I thought maybe computer on new BSODs Random that was causing the problems but it seems its not the case Motherboard is a Asus P Z V Pro Gen Processor is an i k at stock speeds Power supply Random BSODs on new computer is an OCZ W ZT Series I don't have Random BSODs on new computer a graphics card i'm using intels integrated graphics I followed the guide to get my bsod dump information somewhere on the forums and here it is Code Microsoft R Windows Debugger Version AMD Copyright c Microsoft Corporation All rights reserved Loading Dump File C Windows MEMORY DMP Kernel Summary Dump File Only kernel address space is available Symbol search path is SRV c symbols http msdl microsoft com download symbols Executable search path is Windows Kernel Version MP procs Free x Product WinNt suite TerminalServer SingleUserTS Built by amd fre win ldr - Machine Name Kernel base xfffff c d PsLoadedModuleList xfffff e e Debug session time Mon May UTC System Uptime days Loading Kernel Symbols Loading User Symbols PEB is paged out Peb Ldr ff fffd Type quot hh dbgerr quot for details Loading unloaded module list TRIAGER Could not open triage file C Program Files x Windows Kits Debuggers x triage oca ini error TRIAGER Could not open triage file C Program Files x Windows Kits Debuggers x winxp triage ini error TRIAGER Could not open triage file C Program Files x Windows Kits Debuggers x triage user ini error Bugcheck Analysis Use analyze -v to get detailed debugging information BugCheck A c fffff c bf TRIAGER Could not open triage file C Program Files x Windows Kits Debuggers x triage modclass ini error Probably caused by memory corruption nt MiComputeFlushRange c Followup MachineOwner --------- kd gt analyze -v Bugcheck Analysis IRQL NOT LESS OR EQUAL a An attempt was made to access a pageable or completely invalid address at an interrupt request level IRQL that is too high This is usually caused by drivers using improper addresses If a kernel debugger is available get the stack backtrace Arguments Arg c memory referenced Arg IRQL Arg bitfield bit value read operation write operation bit value not an execute operation execute operation only on chips which support this level of status Arg fffff c bf address which referenced memory Debugging Details ------------------ TRIAGER Could not open triage file C Program Files x Windows Kits Debuggers x triage modclass ini error WRITE ADDRESS c CURRENT IRQL FAULTING IP nt MiComputeFlushRange c fffff c bf mov qword ptr rax rcx DEFAULT BUCKET ID WIN DRIVER FAULT BUGCHECK STR xA PROCESS NAME VSSVC exe TRAP FRAME fffff -- trap xfffff NOTE The trap frame does not contain all registers Some register values may be zeroed or incorrect rax c rbx rcx rdx rsi rdi rip fffff c bf rsp fffff a rbp fffffa f r r fffff f r r r r r r iopl nv up ei pl zr na po nc nt MiComputeFlushRange x c fffff c bf mov qword ptr rax rcx ds c Resetting default scope LAST CONTROL TRANSFER from fffff c ee to fffff c STACK TEXT fffff c fffff c ee a c nt KeBugCheckEx fffff d fffff c b c fffffa f b nt KiBugCheckDispatch x fffff fffff c bf fffff a b fffffa fffff ecf e fffffa f f nt KiPageFault x fffff a fffff c e fffff fffff fffff nt MiComputeFlushRange x c fffff fffff c a fffff ecf e fffff e nt MmFlushSection x fffff f fffff ff fffffa f f fffff a nt CcFlushCache x a fffff f fffff ae e fffff a Ntfs NtfsFlushUserStream x fffff fffff ffbbd fffffa f f fffffa fffffa c f fffff a c a Ntfs NtfsFlushVolume x c fffff a fffff f fffffa f f fffffa e f fffffa facc Nt... Read more

A:Random BSODs on new computer

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.
Please attach the DMP files to your next post not to post one.

If you are overclocking STOP

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.


To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

http://www.sevenforums.com/bsod-help-support/229763-random-bsods-new-computer.html
Relevancy 59.34%

Hello everyone I bought a new computer several weeks ago and after some problems quot Bad Bios Checksum - Starting Bios recovery quot when I started it it worked very well with Win XP after I replaced a defectuous memory module So I installed Win and since then I got several BSOD mostly MEMORY MANAGEMENT and one time PFN LIST CORRUPT here is my piriform summary http speccy piriform new on computer Random BSODs a com results B Random BSODs on a new computer RE A pQwDOuyeobOlnT and here are the latest dump reports I saved Bugcheck Analysis Use analyze -v to get detailed debugging information BugCheck E d ab ab Page a f not present in the dump file Type quot hh dbgerr quot for detailsProbably caused by memory corruption nt MiBadShareCount c Followup MachineOwner--------- kd gt analyze -v Bugcheck Analysis PFN LIST CORRUPT e Typically caused by drivers passing bad memory descriptor lists ie callingMmUnlockPages twice with the same list etc If a kernel debugger isavailable get the stack trace Arguments Arg A PTE or PFN is corruptArg d ab page frame numberArg current page stateArg ab Debugging Details ------------------BUGCHECK STR x E DEFAULT BUCKET ID VISTA DRIVER FAULTPROCESS NAME firefox exeCURRENT IRQL LAST CONTROL TRANSFER from fffff c c to fffff c STACK TEXT fffff dfe fffff c c e d ab nt KeBugCheckExfffff dfe fffff c e d d ab fffffa a d nt MiBadShareCount Random BSODs on a new computer x cfffff dfe fffff d a nt FNODOBFM string x fffff dffb fffff bd f fffff fffff e nt MiFreePagedPoolPages x fffff e fffff c c fffff e d fffff e nt MiFreePoolPages x fffff e fffff bc fffff c fffff e nt ExFreePoolWithTag x ccfffff e c fffff a fffff c b fffff c fffff c win k FreeObject x fffff e f fffff fffff fffff c fffff win k SURFACE bDeleteSurface x afffff e fffff f fffff c f efdb win k bDeleteSurface x fffff e fffff b fffffa f fffff e f b win k NtGdiDeleteObjectApp xd fffff e a f dd nt KiSystemServiceCopyEnd x ce fffff x f dd fffff e fffff nt KiCallUserModefffff e fffff e db xfffff STACK COMMAND kbFOLLOWUP IP nt MiBadShareCount cfffff c c cc int SYMBOL STACK INDEX SYMBOL NAME nt MiBadShareCount cFOLLOWUP NAME MachineOwnerMODULE NAME ntDEBUG FLR IMAGE TIMESTAMP c c a IMAGE NAME memory corruptionFAILURE BUCKET ID X x E nt MiBadShareCount cBUCKET ID X x E nt MiBadShareCount cFollowup MachineOwner--------- kd gt analyze -v Bugcheck Analysis PFN LIST CORRUPT e Typically caused by drivers passing bad memory descriptor lists ie callingMmUnlockPages twice with the same list etc If a kernel debugger isavailable get the stack trace Arguments Arg A PTE or PFN is corruptArg d ab page frame numberArg current page stateArg ab Debugging Details ------------------BUGCHECK STR x E DEFAULT BUCKET ID VISTA DRIVER FAULTPROCESS NAME firefox exeCURRENT IRQL LAST CONTROL TRANSFER from fffff c c to fffff c STACK TEXT fffff dfe fffff c c e d ab nt KeBugCheckExfffff dfe fffff c e d d ab fffffa a d nt MiBadShareCount x cfffff dfe fffff d a nt FNODOBFM string x fffff dffb fffff bd f fffff fffff e nt MiFreePagedPoolPages x fffff e fffff c c fffff e d fffff e nt MiFreePoolPages x fffff e fffff bc fffff c fffff e nt ExFreePoolWithTag x ccfffff e c fffff a fffff c b fffff c fffff c win k FreeObject x fffff e f fffff fffff fffff c fffff win k SURFACE bDeleteSurface x afffff e fffff f fffff c f efdb win k bDeleteSurface x fffff e fffff b fffffa f fffff e f b win k NtGdiDeleteObjectApp xd fffff e a f dd nt KiSystemServiceCopyEnd x ce fffff x f dd fffff e fffff nt KiCallUserModefffff e fffff e db xfffff STACK COMMAND kbFOLLOWUP IP nt MiBadShareCount cfffff c c cc int SYMBOL STACK INDEX SYMBOL NAME nt MiBadShareCount cFOLLOWUP NAME MachineOwnerMODULE NAME ntDEBUG FLR IMAGE TIMESTAMP c c a IMAGE NAME memory corruptionFAILURE BUCKET ID X x E nt MiBadShareCount cBUCKET ID X x E nt MiBadShareCount cFollowup MachineOwner--------- Bugcheck Analysis Use analyze -v to get detailed debugging information BugCheck A fffffa b ffff Probably caused by ntkrnlmp exe nt FNODOBFM string Followup Ma... Read more

A:Random BSODs on a new computer

Hi there, chocobog. to Bleeping Computer.Did this computer come brand new with XP on it?? That seems odd to me...Also, those crash dumps aren't very useful until you run them through BlueScreenView: Download BlueScreenViewNo installation required.Double click on BlueScreenView.exe file to run the program.When scanning is done, go Edit>Select All.Go File>Save Selected Items, and save the report as BSOD.txt.Open BSOD.txt in Notepad, copy all content, and paste it into your next reply.

http://www.bleepingcomputer.com/forums/t/352770/random-bsods-on-a-new-computer/
Relevancy 59.34%

Hi I just Random new BSODs on computer recently built my own computer and it has been randomly blue screening since I first turned it on When I looked at the dump files it seemed like it was cause by something different every crash Random BSODs on new computer I feel like I've tried everything to no avail -I've done multiple memory tests with a few passes with no problems -I've done a fresh intall of Windows twice -I updated every possible driver I think of -I updated my BIOS -I've tried taking one stick of RAM out and alternating between the sticks And right now I'm in the process of alternating between sticks of RAM and alternating between memory slots I don't have all my memory dumps right now because I just did a fresh install of window yesterday I'm thinking about sending my RAM back to Newegg and getting some new stuff Do you think this could possibly be the problem or would sending in the ram just be a waste of time I'm just worried there is something wrong with my hardware and there's gonna be no way to figure out what causing it Any help would be greatly appreciated Thanks

A:Random BSODs on new computer

I would give the guys here a chance to see your dump files before returning hardware. ...just because a driver is updated doesn't necessarily mean it's the right one, or working well with windows. If your RAM has been passing memory tests I wouldn't be so quick to blame it.

More detailed assistance will be available here when you can provide a dump file for the community to look at.
http://www.sevenforums.com/crashes-d...tructions.html

http://www.sevenforums.com/bsod-help-support/140817-random-bsods-new-computer.html
Relevancy 59.34%

So I've been getting a variety of BSODs ever since I did a fresh install of windows 7 ultimate, also some Microsoft updates won't install. Please help!

A:Been getting random BSODs on my computer.

Hi JaySaenz29
 
If you want some help it would come in handy if you provide us with more information about the correct errorcode of BSOD.
For starters you can, if possible, install BlueScreenView and give some feedback.

 

http://www.bleepingcomputer.com/forums/t/575267/been-getting-random-bsods-on-my-computer/
Relevancy 59.34%

Hi,

I've posted on these forums before, but I was never able to solve my blue screen problem. I've been struggling with these blue screens since I built my computer about 5 months ago. I'm currently running windows 7 64 bit. I've ran multiple memory tests with 7 passes and they have all come up clean. Like I said, the blue screen are normally random, but lately, I've been getting something like atikmdag.sys. This has something to do with the video card doesn't it? Any help would be greatly appreciated.

A:Random BSODs on New Computer

  
Quote: Originally Posted by Mzimzim


Hi,

I've posted on these forums before, but I was never able to solve my blue screen problem. I've been struggling with these blue screens since I built my computer about 5 months ago. I'm currently running windows 7 64 bit. I've ran multiple memory tests with 7 passes and they have all come up clean. Like I said, the blue screen are normally random, but lately, I've been getting something like atikmdag.sys. This has something to do with the video card doesn't it? Any help would be greatly appreciated.


You uploaded the app instead of the results. Please try this method.


To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:

* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.

To ensure minidumps are enabled:

Go to Start, in the Search Box type: sysdm.cpl, press Enter.
Under the Advanced tab, click on the Startup and Recovery Settings... button.
Ensure that Automatically restart is unchecked.
Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
OK your way out.
Reboot if changes have been made.

http://www.sevenforums.com/bsod-help-support/164231-random-bsods-new-computer.html
Relevancy 59.34%

So I just bought and assembled a new pc. Everything new.

Have been having bsods since the beginning. Also windows updates keep failing. Specifically sp1.

Attached is the dump files.

Thanks in advance!

A:x0a xc9 bsods on a newly built pc

STOP 0x0000000A: IRQL_NOT_LESS_OR_EQUAL
Usual causes: Kernel mode driver, System Service, BIOS, Windows, Virus scanner, Backup tool, compatibility

STOP 0x000000C9: DRIVER_VERIFIER_IOMANAGER_VIOLATION
Usual causes: Driver verifier

- Test your RAM. your dump files states an indication of possible memory corruption
RAM - Test with Memtest86+
Run for at least 8 passes. Pay attention to #3 on that link

- Also, run these two commands from the elevated command prompt:
chkdsk /r /f
SFC /scannow

- One of the DirectX driver was caught on the BSOD dump files. Try to update directx
dxgmms1.sys - Driver Reference Table

Code:
Image path: \SystemRoot\System32\drivers\dxgmms1.sys
Image name: dxgmms1.sys
Timestamp: Wed Jan 26 11:22:12 2011 (4D3FA174)
- Looks like Driver Verifier was enabled on your PC, and caught IOMap64.sys causing I/O error.
This also pops up several times in your dump files
IOMap64.sys - Driver Reference Table
Consider Updating that driver first:
ASUSTeK Computer Inc. -Support- Drivers and Download

Code:
Image path: \??\C:\Windows\system32\drivers\IOMap64.sys
Image name: IOMap64.sys
Timestamp: Fri Feb 05 08:55:34 2010 (4B6B7A96)
- Until we need it again for further testing, disable driver verifier to reduce your PC Load
Driver Verifier - Enable and Disable
BSOD ANALYSIS

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {fffffa8018e4f010, 2, 1, fffff80002d43b07}

Probably caused by : memory_corruption ( nt!MiReleaseConfirmedPageFileSpace+87 )

Followup: MachineOwner
---------
IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {fffffa8018e1b010, 2, 1, fffff80002d81b07}

Probably caused by : dxgmms1.sys ( dxgmms1!VIDMM_GLOBAL::DestroyOneAllocation+153 )

Followup: MachineOwner
---------

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck C9, {226, fffff880047d5734, fffff98013e5eee0, 0}

Unable to load image \??\C:\Windows\system32\drivers\IOMap64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for IOMap64.sys
*** ERROR: Module load completed but symbols could not be loaded for IOMap64.sys
Probably caused by : IOMap64.sys ( IOMap64+1734 )

Followup: MachineOwner
---------

http://www.sevenforums.com/bsod-help-support/289607-x0a-xc9-bsods-newly-built-pc.html
Relevancy 58.91%

So over the past days my computer has blue screened about times yet I'm never there to witness it computer I BSODs Random am currently at the ntoskrnl.exe if not it always crashes if I leave it alone for minutes Random ntoskrnl.exe BSODs if I am not currently at the computer to go get food or finish up something around the house Last time it crashed I decided I'd stop using my computer and watch it to see what may have caused it and what I noticed was that all of my PC's services started crashing one by one until the BSOD sometimes the audio service will crash will I'm currently using the PC I used WhoCrashed which says the error is CRITICAL OBJECT TERMINATION bugcheck xF x xFFFFFA B E B xFFFFFA B E E xFFFFF F It's not hardware related just drivers I recently got a new HDD so I formatted and did everything exactly how I used to I honestly have no idea which driver could be at fault My diagnostic files are located here If you guys need any more information I'll be here P EDIT I forgot to add I don't know if this is related but if I attempt launching services msc my entire computer hangs until it crashes minutes later

A:Random ntoskrnl.exe BSODs if I am not currently at the computer

Welcome aboard!

Three of your dumps show this:

Code:
.....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck F4, {3, fffffa800b4e49e0, fffffa800b4e4cc0, fffff80002f75720}

Probably caused by : csrss.exe

Followup: MachineOwner
---------
We may start with SFC /SCANNOW Command - System File Checker here.

But one dump shows this.


Code:

......
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck C000021A, {fffff8a00fdcb320, ffffffffc0000006, 77804e8f, d2da50}

Probably caused by : ntkrnlmp.exe ( nt!ExpSystemErrorHandler2+5e1 )

Followup: MachineOwner
---------

3: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

WINLOGON_FATAL_ERROR (c000021a)
The Winlogon process terminated unexpectedly.
Arguments:
Arg1: fffff8a00fdcb320, String that identifies the problem.
Arg2: ffffffffc0000006, Error Code.
Arg3: 0000000077804e8f
Arg4: 0000000000d2da50

Debugging Details:
------------------


ERROR_CODE: (NTSTATUS) 0xc000021a - {Fatal System Error} The %hs system process terminated unexpectedly with a status of 0x%08x (0x%08x 0x%08x). The system has been shut down.

EXCEPTION_CODE: (NTSTATUS) 0xc000021a - {Fatal System Error} The %hs system process terminated unexpectedly with a status of 0x%08x (0x%08x 0x%08x). The system has been shut down.

EXCEPTION_PARAMETER1: fffff8a00fdcb320

EXCEPTION_PARAMETER2: ffffffffc0000006

EXCEPTION_PARAMETER3: 0000000077804e8f

EXCEPTION_PARAMETER4: d2da50

ADDITIONAL_DEBUG_TEXT: Windows SubSystem

BUGCHECK_STR: 0xc000021a_csrss.exe_c0000006

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

PROCESS_NAME: csrss.exe

CURRENT_IRQL: 0

LAST_CONTROL_TRANSFER: from fffff8000312ad6e to fffff80002cce040
Usual causes of BugCheck C000021A: User-mode device driver, system service, or third-party application, Mismatched system files.

First let us see the user mode device drivers.
Audio:
AMD High Definition Audio Device : needs to be updated
Bluetooth Audio Device (Manufacturer: Atheros Communications) needs to be updated
Display: ATI Radeon HD 5800 Series : seems to be up to date
Network:
Intel(R) 82579V Gigabit Network Connection : needs to be updated
Bluetooth Device (Personal Area Network) Adapter Type Ethernet 802.3 : must be updated.

Within your system services, dont allow the Bluetooth and the Catalyst Control Center to run.

Among the third program, I am not seeing anything that bad other than Catalyst Control Center and Asus AI Suite II. Better you remove these.

Another thing: Enabling Driver Verifier sometimes are very helpful. You may take a chance, too!
Driver Verifier - Enable and Disable

Post back wit... Read more

http://www.sevenforums.com/bsod-help-support/251930-random-ntoskrnl-exe-bsods-if-i-am-not-currently-computer.html
Relevancy 58.91%

Okay so today my crashing random computer keeps My BSoDs! with computer has crashed FIVE TIMES for the most random reasons I have also written the times that it crashed and what error it gave me BAD POOL HEADER AM I got this error while I was watching a video PAGE FAULT IN NONPAGED AREA PM I don't know how or why I got this error I notice that this error was very common in Windows XP so I have no idea why it happened in Windows I was changing some network settings and then this happened it also told me that win k sys was causing the problem BAD POOL CALLER PM I was trying to watch a video in iTunes when My computer keeps crashing with random BSoDs! this error popped up I have no idea why win k sys PM There's win k sys again I don't know what's wrong with it This one popped up when I tried to watch a video in iTunes again win k sys PM Once again win k sys screwed something up with my computer I have no idea what it's doing Should I delete it And this error came up when I tried to play a video in iTunes- for the third time Again I have no idea what's going on with my computer And sorry I'm unable to post any dump files in this thread Please help me with this shadowboy

A:My computer keeps crashing with random BSoDs!

Please follow the Blue Screen of Death (BSOD) Posting Instructions

http://www.sevenforums.com/bsod-help-support/294230-my-computer-keeps-crashing-random-bsods.html
Relevancy 58.91%

I just got a custom built computer, and I'm getting random BSODs every day or so. They seem have different codes. I tried looking at the dumps in windbg but was not able to understand what the problem is.
I also ran an overnight memtest which was fine.
Attached are the dump files.
Thanks in advance!!

http://www.sevenforums.com/bsod-help-support/382308-random-bsods-every-24-36-hours-new-computer.html
Relevancy 58.91%

My computer has been BSOD'ing lately. It usually happens when I try to update windows. This usually will cause windows to freeze screen for a short bit, or not allow me to do anything (click programs, start menu, or anything on the taskbar). After this usually results in a BSOD. Please help

The 00Gonzo attatchment is everything I think is needed.

A:Computer BSODs at random times

Code:
BugCheck 7A, {c0442f50, c0000185, 22d27860, 885ea17e}

GetPointerFromAddress: unable to read from 82bab834
Probably caused by : memory_corruption

Code:
Usual causes: Memory, Paging file corruption, File system, Hard drive, Cabling, Virus infection, Improperly seated cards, BIOS, Bad motherboard, Missing Service Pack
This bugcheck indicates that a driver within the storage stack wasn't able to page data back into physical memory.


Code:
ERROR_CODE: (NTSTATUS) 0xc0000185 - The I/O device reported an I/O error.

DISK_HARDWARE_ERROR: There was error with disk hardware

Code:
!chkimg -lo 50 -d !PCIIDEX

3949 errors : !PCIIDEX (885ea000-885eafff)
--------------------------------------------------------------------------------

I would backup all your data and important files immediately, and perform these steps:

Run some hard-drive diagnostics and follow these steps:Hard Drive Diagnostic Procedure
Find your hard-drive manufacturer and run their tests.

Additional Tests:SeaTools for DOS | Seagate
CrystalDiskInfo - Software - Crystal Dew World
Post a screenshot of Crystal Disk Info summary:Screenshots and Files - Upload and Post in Seven Forums







  
Quote: Originally Posted by writhziden


If you have an SSD, make sure the following are up to date:SSD firmware
BIOS Version
Chipset Drivers
Hard disk controller drivers/SATA drivers
If you have a Marvell IDE ATA/ATAPI device, make sure the drivers are up to date from the Intel site or Marvell site and not from your motherboard/vendor support site.



Check for any file system errors and bad sectors using Option #2 of:Disk Check
Use this command with Disk Check:


Code:
chkdsk C: /f /r

http://www.sevenforums.com/bsod-help-support/298491-computer-bsods-random-times.html
Relevancy 58.91%

Hey I ve started having very strange and very serious bsod-problems and weird BSODs getting keeps and Computer random ?freezing? on freezes last fall I tried everything Computer keeps on getting random BSODs and ?freezing? from re-installing all drivers and the whole OS I even changed it to XP When I tried driververifier exe the whole rig went berserk Finally I could t even install xp without getting a bsod Resetting BIOS would t work either so I sent the mobo and the processor back to the retailer but they could t find any problem with them and they sent the parts back to me When I reassembled the parts the computer started working again and I haven t had any problems with it Untill now This time I ve reinstalled Win updated it installed all the latest drivers did a full virusscan with avast found Athena exe infection Computer keeps on getting random BSODs and ?freezing? in my Acronics backup folder-- gt deleted the Computer keeps on getting random BSODs and ?freezing? folder and reinstated OS l No help I still keep getting the same old freezes and BSODs which say something about a fatal error and system protection but no error code System help report said the following freely translated because my OS is in Finnish quot Could t detect antivirus program etc etc etc quot -- gt nobrainer with avast This was interesting quot A high stopcount per processor detected This computer has processor and quot webcards quot meaning wlan-card and the integrated ethernet-card I think Total computer stopcount per second is Average stopcount per processor is quot And the counts from the processor drop-down menu were quot Average Smallest value Highest value quot Please help me solve this My rig cost me a fortune and I m a university student so I really can t afford a new one

A:Computer keeps on getting random BSODs and “freezing“

Dump file added

http://www.sevenforums.com/bsod-help-support/212095-computer-keeps-getting-random-bsods-freezing.html
Relevancy 58.48%

Hello I recently custom built myself a pc February I've been getting blue screens never more than a day Specs Windows Home Premium SP X Retail - Microsoft Windows Home Premium - Licence and media - PC - OEM - DVD - -bit - English All the hardware is new apart from CD DVD Drive which I transfered out of my old PC so dates from The hdd is new pc on built newly Numerous BSODs although I did install it on the old system Numerous BSODs on newly built pc and because the old hdd had a pre-installed version of XP I cloned this onto the new hdd using Acronis True Image Hardware AMD Phenom II X Black Edition Socket AM GHz MB L Cache Retail Boxed Processor PALIT Numerous BSODs on newly built pc GT Green Edition GB GDDR VGA DVI HDMI Out PCI-E Graphics Card Gigabyte GA-MA -UD Socket AM Channel Audio ATX Motherboard Corsair W TX Series PSU - mm Fan Efficiency Single V Rail Corsair GB x GB DDR MHz PC - XMS Memory Kit CL v Samsung HD SJ Spinpoint F TB Hard Drive SATAII rpm MB Cache Additionally I ran Memtest upto passes with no errors Thanks in advance for any help advice

A:Numerous BSODs on newly built pc

Hi,

First step to remove your USB WiFi device temporarily. Most of the BSODs appear to be related to it. I want to be sure that it is the sole issue, the best way to do that is to remove it from the situation for a day or two.

If you still receive BSODs with it removed then clearly we have another issue here.

BUGCHECK SUMMARY

Code:

Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Debug session time: Sat May 7 01:26:14.880 2011 (GMT+12)
System Uptime: 0 days 5:47:21.519
Probably caused by : memory_corruption ( nt!MiPerformFixups+80 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x50
PROCESS_NAME: svchost.exe
FAILURE_BUCKET_ID: X64_0x50_nt!MiPerformFixups+80
Bugcheck code 00000050
Arguments ffffe8a0`0bfeb848 00000000`00000000 fffff800`0415d050 00000000`00000007
SystemProductName = GA-MA770-UD3
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Debug session time: Thu May 5 21:05:11.405 2011 (GMT+12)
System Uptime: 0 days 1:36:49.044
BugCheck D1, {ffffea80076972c8, 2, 0, fffff880014053fe}
*** WARNING: Unable to verify timestamp for netr28x.sys
*** ERROR: Module load completed but symbols could not be loaded for netr28x.sys
Probably caused by : NETIO.SYS ( NETIO!FilterMatch+4e )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0xD1
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0xD1_NETIO!FilterMatch+4e
Bugcheck code 000000D1
Arguments ffffea80`076972c8 00000000`00000002 00000000`00000000 fffff880`014053fe
SystemProductName = GA-MA770-UD3
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Debug session time: Sun May 1 22:29:29.085 2011 (GMT+12)
System Uptime: 0 days 1:10:25.723
Probably caused by : fltmgr.sys ( fltmgr!FltpPerformPreCallbacks+f9 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x50
PROCESS_NAME: explorer.exe
FAILURE_BUCKET_ID: X64_0x50_fltmgr!FltpPerformPreCallbacks+f9
Bugcheck code 00000050
Arguments ffffea80`056b62a0 00000000`00000000 fffff880`01018e69 00000000`00000007
SystemProductName = GA-MA770-UD3
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Debug session time: Sun May 1 02:54:19.624 2011 (GMT+12)
System Uptime: 0 days 5:35:23.263
*** WARNING: Unable to verify timestamp for usbfilter.sys
*** ERROR: Module load completed but symbols could not be loaded for usbfilter.sys
Probably caused by : usbfilter.sys ( usbfilter+5292 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x50
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0x50_usbfilter+5292
Bugcheck code 00000050
Arguments fffff881`0583609b 00000000`00000001 fffff880`058732a5 00000000`00000005
SystemProductName = GA-MA770-UD3
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Debug session time: Fri Apr 29 21:17:12.060 2011 (GMT+12)
System Uptime: 0 days 0:42:32.699
Probably caused by : ntkrnlmp.exe ( nt!SwapContext_PatchXSave+b5 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0xA
PROCESS_NAME: chrome.exe
FAILURE_BUCKET_ID: X64_0xA_nt!SwapContext_PatchXSave+b5
Bugcheck code 0000000A
Arguments 00000000`00000004 00000000`00000002 00000000`00000001 fffff800`03e962b6
SystemProductName = GA-MA770-UD3
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Debug session time: Fri Apr 29 07:45:32.387 2011 (GMT+12)
System Uptime: 0 days 5:58:13.026
Probably caused by : memory_corruption ( nt!MiClearFilePointer+9e )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0xA
PROCESS_NAME: explorer.exe
FAILURE_BUCKET_ID: X64_0xA_nt!MiClearFilePointer+9e
Bugcheck code 0000000A
Arguments ffffea80`03d39e50 00000000`00000002 00000000`00000001 fffff800`03e5e006
Sy... Read more

http://www.techsupportforum.com/forums/f299/numerous-bsods-on-newly-built-pc-571987.html
Relevancy 58.48%

I recently built my first PC three days ago Specs i bloomfield processor x vengeance ram crosair hx PSU evga x ftw mobo hd radeon graphics xfx When Newly and freezing freezing built starting on random windows computer I first installed windows it Newly built computer random freezing and freezing on starting windows started to work just fine but I soon noticed that it would randomly freeze every - minutes of use but not on a particular program or anything I assumed it was drivers so I installed the latest drivers for my GPU and MOBO and keyboard It seemed fine again until it started crashing again I ran a GPU burn test and a CPU burn test it passed both I tried runing memtest but it froze at like Then I tried fixing the registry so I downloaded ccleaner and fixed the registry problems Freezes continued I finally decided to re install windows so I did and the problems still continued I am at a loss of what to do and can't think of anything else any advice would be appreciated if not I will bring to a repair shop and have them sort it out

A:Newly built computer random freezing and freezing on starting windows

Hello Skytri and welcome to Seven Forums. My usual disclaimer: I'm not at expert at anything.

I'm wondering if there isn't a RAM problem. Perhaps one of the sticks wasn't seated properly, etc. You could open Resource Monitor > Memory tab and make sure all RAM is being recognized. Make sure Installed = 16384MB and the Available + Cached + Hardware Reserved is the same amount. (You are using 16GB total, correct?)

Resource Monitor

If Memtest freezes you could try a quick check for a bad RAM module. Install one stick in Slot # 1 (or whichever slot the mobo manual says to use.) Run the computer to test for freezes. Test each of the remaining sticks one at a time. If all 4 sticks work you might want to go through these troubleshooting guides. They are time consuming but many people have been able to isolate their computer problems.

Troubleshooting Windows 7 Failure to Boot

Troubleshooting Steps for Windows 7

http://www.sevenforums.com/general-discussion/247213-newly-built-computer-random-freezing-freezing-starting-windows.html
Relevancy 58.05%

Hi This will be my first but probably not last post here I recieved my new computer last Thursday and ever since I ve been experiencing BSODs in Windows There seems to be no obvious trigger it happens when running programs playing games installing software or even just browsing the web I ll give you some specs here Motherboad Gigabyte MA X-UD CPU AMD Phenom II GHZ CPU Cooling OCZ Vendetta II Memory MB Corsair XMS GPU ATI Radeon GB System drive GB SSD OCZ Vertex Storage drive GB WD Green PSU Corsair W PSU CMPSU-TXEU OS Windows XP -bit CPU-temp right now is degrees and this is after running prime with small FFT for mins GPU is at degrees When the BSODs started I proceeded by resetting CMOS reloading BIOS defaults and reinstalling Win XP But no difference Today I ve been running Memtest test and it made two passes with no errors Also did one pass with default tests which also passed without errors However when running - New - BSODs attached Random Minidumps computer Prime torture test in blend mode the workers fail New computer - Random BSODs - Minidumps attached within minutes New computer - Random BSODs - Minidumps attached regardless of running with or threads Running in Small FFT New computer - Random BSODs - Minidumps attached mode seems to be no problem at all Yesterday I tried using just one memory stick but once again got the BSOD when browsing the web I honestly have no clue how to move on from here Is there something else I can try Hope someone can shed some light on the situation I ll attach some minidumps been trying to understand them but to me it seems like there s a different error everytime nbsp

A:New computer - Random BSODs - Minidumps attached

Problem solved it seems, changed timings on memory from stock 5-5-5-18 to 6-6-6-18, and now prime 95 blend have been running for 1 hour with 4 threads and no errors!
 

http://www.techspot.com/community/topics/new-computer-random-bsods-minidumps-attached.124170/
Relevancy 58.05%

I encounter this problem when I installed my new Video Card

PALIT Nvidia Geforce GT630 2gb

CPU:
AMD athlon 64 x2 4400+

Motherboard:
Asrock N68C-S-UCC

Ram:
2x KVR667D2N5/2G (4g)

A:Random BSODs sometimes when I am AFK on the computer or Playing Games

Welcome aboard.


Code:
.......
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1A, {41201, fffff68000164708, b100000029d67847, fffffa8005f570c0}

Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+13c82 )

Followup: MachineOwner
---------
Your crash dumps are not showing any finite probable cause. In such a situation, it is better to enable Driver Verifier to monitor the drivers.

Driver Verifier - Enable and Disable

Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

Let us know the results, with the subsequent crash dumps, if any.

http://www.sevenforums.com/bsod-help-support/255958-random-bsods-sometimes-when-i-am-afk-computer-playing-games.html
Relevancy 58.05%

I built this computer about a year ago, and have had some problems recently.
Specs:
Gigabyte ga-p55a-ud3
Core i5-650 @ 3.2GHz
ATI Radeon 5770 (powering 2 monitors w/ DVI)
Patriot "Sector 5" RAM (2x4GB)
Windows 7 Home Premium x64

I have had BSODs almost daily for the past week or so, but they're all different. Several hours ago, after leaving it unattended for a few hours, the computer just kind of turned off, but with the system fan and lights still on. My monitors has no signal, and my keyboard didn't do anything, but its light was still on. Maybe there's something wrong with my graphics card? I'm going to try to run a memtest tonight.

I uploaded some minidumps below--these are all of the ones in the past 2 weeks.

Thanks.

A:Random BSODs, crashes, computer slowness

These crashes were caused by memory corruption/exception (probably a driver).
Please run these two tests to verify your memory and find which driver is causing the problem.

* If you are overclocking anything reset to default before running these tests.
In other words STOP!!!

* If you have raid update its Driver.

Memtest.





Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.



RAM - Test with Memtest86+

Driver verifier






Quote:
Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

So, I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Special Pool", "Force Pending I/O Requests" and "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen.
Continue to use your system normally, and if you know what causes the crash, do that repeatedly.
The objective here is to get the system to crash because Driver Verifier is stressing the drivers out.
If it doesn't crash for you, then let it run for at least 36 hours of continuous operation.

Reboot into Windows (after the crash) and turn off Driver Verifier by going back in and selecting "Delete existing settings" on the first page, then locate and zip up the memory dump file and upload it with your next post.

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.

http://www.sevenforums.com/bsod-help-support/219378-random-bsods-crashes-computer-slowness.html
Relevancy 58.05%

Hello I recently built a new computer However it keeps bluescreeening randomly usually within one hour of starting windows I posted this problem on the Crashes and Debugging forum for help but was redirected here by a user who suggested it was either that a virus or GPU driver not functioning Original post www sevenforums com crashes-debugging -random-bsods-new-computer html nbsp nbsp Quote Originally Posted by James nbsp nbsp Quote Originally Posted by edmundkong Hello I changed it but crashed within mins BAD POOL HEADER Tried again crashed right after Windows started up and when I rebooted again there was a pop up igfxtrayWindow igfxtray exe - Entry Point Not found The procedure entry point CoTaskMe could not be located in the dynamic link library ole dll You either have a virus as previously stated or your GPU driver is not functioning Maybe want to get a new thread going in System Security to get a thorough analysis PC Specs on new computer Random BSODs caused virus? by Corsair Force GT GB SSD A western digital TB harddisk which I have currently disconnected as I thought maybe that was causing the problems but it seems its not the case Motherboard is a Asus P Z V Pro Gen Processor is an i k at stock speeds Power supply is an OCZ W ZT Series I don't have a graphics card i'm using intels integrated graphics I would greatly appreciate it if anyone could help me solve this issue Thanks Also note that when I only use one stick of ram the problem goes away

A:Random BSODs on new computer caused by virus?

Where did you get your drivers? Did you download them from Asus? Do you have a lot of experience with watercooling, or is this your first time doing it?

http://www.sevenforums.com/system-security/233307-random-bsods-new-computer-caused-virus.html
Relevancy 58.05%

I times, random bsods Computer at restarts have this problem for some months that i get random BSODs computer restarts First of all a problem i have for some months When i use mozila Computer restarts at random times, bsods firefox browser the computer crashes after a few minutes And when i start BFBC it instantly reboots But lately it is happening more often the computer restarts randomly when browsing in chrome or playing in games such as garrysmod and fallout new vegas And i'm not sure that it is a BSOD because i only have two minidumps that are pretty old I don't know if this is a software or hardware problem because i tried installing drivers and it didn't help and some months ago i reformatted windows and it didn't help either The GPU Temperature is about C after the computer restarts which is normal And the CPU Temperature is about C too I'm planning on upgrading the hardware probably the GPU but i don't know if it is the problem or is it the processor psu ram motherboard etc Included perfmon and bsod dump system report file but i'm not sure if the problems i have are BSODs since i don't get the actual blue screen and i only have two old minidumps The computer just randomly restarts

A:Computer restarts at random times, bsods

Temps seem ok...

You also have some problems with Windows Update





Quote:
Please go to your Maintenance Center and check the Windows Update status. Make sure you are up to date, do them one by one manually if needed.
For help or reset see: Windows Update - Reset


Furthermore... you might want to free some space on D:

Dumps are old...but the Aug 3rd one points to problems with your graphics drivers.
Please renew: ati driver

Make SURE you delete old first.
When upgrading your graphic driver you MUST remove all traces of the current driver. In order to do that we recommend using Driver Sweeper

Driver Sweeper is a fast tool to remove driver leftovers from your system. It's very important to remove your drivers on a proper way, because driver leftovers can cause problems like stability and startup problems. You can use it if you want to update/remove drivers from your system.

How to use ?

There are two methods to use Driver Sweeper.
Both methods achieve the same results. This method is always able to clean all files.

This method will delete remaining files upon reboot (if deleting failed). You can clean your drivers this way:

- Use the official uninstaller(s) of the driver(s) you want to uninstall.
- Reboot your PC in Safe Mode.
- Run Driver Sweeper and select what to clean.
- Analyse lists all the entries possible to remove, cleaning removes the entries selected.
- More drivers can be selected for the same cleaning process.

What can it be used for ?
The current supported drivers are NVIDIA (Display and Chipset), ATI (Display), Creative (Sound) Realtek (Sound), Ageia (PhysX) and Microsoft (Mouse).

Phyxion.net - Driver Sweeper
When it is removed then download and install the fresh copy, from the manufacturers' site if possible.

http://www.sevenforums.com/bsod-help-support/183120-computer-restarts-random-times-bsods.html
Relevancy 58.05%

Hello at first moments) computer on Random (no new specific BSODs I'm sorry that my english isn't that good but I'll try to make it kinda understandable Also Random BSODs on new computer (no specific moments) sorry for Random BSODs on new computer (no specific moments) the thread title - but I don't know anything about my problem Afaik it doesn't just happen at specific moments So my problem is that I'm getting BSOD on my new PC I've got the first BSOD on the th of December and the last one just some minutes ago when I started Battlefield the th BSOD so far I tried to find errors with memtest but it didn't found any Here is the description of the BSOD by bluescreenview Quote Dump File - - dmp Crash Time Bug Check String IRQL NOT LESS OR EQUAL Bug Check Code x a Parameter Parameter Parameter Parameter fffff cb c Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe f File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win rtm - Processor x Crash Address ntoskrnl exe f Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File Time Dump File - - dmp Crash Time Bug Check String SYSTEM SERVICE EXCEPTION Bug Check Code x b Parameter c Parameter fffff b Parameter fffff ea Parameter Caused By Driver win k sys Caused By Address win k sys c File Description Product Name Company File Version Processor x Crash Address ntoskrnl exe f Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File Time Dump File - - dmp Crash Time Bug Check String SYSTEM SERVICE EXCEPTION Bug Check Code x b Parameter c Parameter fffff Parameter fffff a Parameter Caused By Driver win k sys Caused By Address win k sys c File Description Product Name Company File Version Processor x Crash Address ntoskrnl exe f Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File Time Dump File - - dmp Crash Time Bug Check String SYSTEM SERVICE EXCEPTION Bug Check Code x b Parameter c Parameter fffff f Parameter fffff Parameter Caused By Driver win k sys Caused By Address win k sys c File Description Product Name Company File Version Processor x Crash Address ntoskrnl exe f Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File Time In the attachments you can also find the dmp files My PC Intel Core i PowerColor Radeon R TurboDuo GB-Kit Crucial Ballistix Sport Series DDR - Crucial MX SSD GB TB WD Green HDD Gigabyte GA-H -D H I really hope someone can help me If you have questions or I forgot about some informations just ask me Thank you in advance EDIT The zip file is made with the tool quot DM Log Collector quot - I just saw the thread and added this file now

A:Random BSODs on new computer (no specific moments)

Hi xMoex.

Install Service pack 1 and all other windows updates. Otherwise the system will remain vulnerable to threats including BSODs. Learn how to install Windows 7 Service Pack 1 (SP1)
Service Pack and Update Center - Microsoft Windows
Let us know for any further BSOD after installing Service Pack 1.
_________________________________________

Code:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255

http://www.sevenforums.com/bsod-help-support/357105-random-bsods-new-computer-no-specific-moments.html
Relevancy 58.05%

Hi,

For weeks now, I've been having random BSODs that include PFN_LIST_CORRUPT, MEMORY_MANAGEMENT, BAD_POOL_HEADER, IRQL_NOT_LESS_OR_EQUAL, and more. Sometimes, the computer randomly shuts off and restarts. A few times, the screen freezes and the keyboard and mouse shuts off.

Lately, it seems as if the computer can't run for ten minutes without crashing. In fact, I had a BSOD when I registered for this site.

Can anyone help? Thanks.

A:Random BSODs, computer randomly shutting down, please help

Welcome to the forum mreeed,

This bug check indicates that a system thread generated an exception that the error handler did not catch.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e)
This is a very common bugcheck. Usually the exception address pinpoints
the driver/function that caused the problem. Always note this address
as well as the link date of the driver/image that contains this address.
Some common problems are exception code 0x80000003. This means a hard
coded breakpoint or assertion was hit, but this system was booted
/NODEBUG. This is not supposed to happen as developers should never have
hardcoded breakpoints in retail code, but ...
If this happens, make sure a debugger gets connected, and the
system is booted /DEBUG. This will let us see why this breakpoint is
happening.
Arguments:
Arg1: ffffffffc0000005, The exception code that was not handled
Arg2: fffff880012cb178, The address that the exception occurred at
Arg3: fffff88003088718, Exception Record Address
Arg4: fffff88003087f70, Context Record Address

Debugging Details:
------------------
Caused by Norton, please remove it for testing purpose.

Code:
Loading User Symbols
*** WARNING: Unable to verify timestamp for SYMEFA64.SYS
*** ERROR: Module load completed but symbols could not be loaded for SYMEFA64.SYS
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1000007E, {ffffffffc0000005, fffff880012cb178, fffff88003088718, fffff88003087f70}

Probably caused by : SYMEFA64.SYS ( SYMEFA64+28178 )

Followup: MachineOwner
---------
Microsoft Security Essentials is recommended from a strict BSOD perspective, compatibility & stability
compared to other antivirus or internet security software. It is free and lightweight:-Microsoft Security Essentials - Free Antivirus for Windows
Malwarebytes: Removes malware including viruses, spyware, worms and trojans, plus it protects your computer
Good and Free system security combination.


   Warning
Do not start the free trial of Malware Bytes; remember to deselect that option when prompted.



Perform a Clean boot:Troubleshoot Application Conflicts by Performing a Clean Startup
Reduce items at start-up. No software except anti-virus is required plus doing this improves the time for logging into windows:How to Change, Add, or Remove Startup Programs in Windows 7
Run the System File Checker that scans the of all protected Windows 7 system files and replaces incorrect corrupted, changed/modified, or damaged versions with the correct versions if possible:Click on the
Type CMD on Search
Left click and Run as Administrator
Type SFC /scannow
Full tutorial here:SFC /SCANNOW Command - System File Checker

This indicates that an exception happened while executing a routine that transitions from non-privileged code to privileged code.


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* ... Read more

http://www.sevenforums.com/bsod-help-support/337961-random-bsods-computer-randomly-shutting-down-please-help.html
Relevancy 58.05%

So mine is a similar case as 'eags72'.

I recently, less than a month ago, upgraded my pc cpu, motherboard, ram and graphics card and since then I have been getting these randomly timed 'driver irql_less_or_not_equal' BSODs. Sometimes during browsing, sometimes while gaming and even while system is idle during downloading. Most days are without any problems, but when i get a BSOD, it repeats.

Graphics card drivers are up to date. I ran MemTest86 with 7 passes and 0 errors.

System Specs can be found on my profile and dmp log has been attached to this post. Thanks for the effort you guys take!

A:Randomly timed BSODs on newly upgraded PC

Code:
fffff880`03183ad8 fffff880`06bc7e00Unable to load image \SystemRoot\system32\DRIVERS\webssx.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for webssx.sys
*** ERROR: Module load completed but symbols could not be loaded for webssx.sys
webssx+0x5e00
What is webssx.sys ? | System Explorer

Code:
fffff880`03184628 fffff880`019e96a7Unable to load image \SystemRoot\system32\DRIVERS\bdsnm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for bdsnm.sys
*** ERROR: Module load completed but symbols could not be loaded for bdsnm.sys
bdsnm+0x16a7
What is bdsnm.sys ? | System Explorer

Uninstall the QuickHeal crap! Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.

Report us for any further BSOD after doing it.

http://www.sevenforums.com/bsod-help-support/368808-randomly-timed-bsods-newly-upgraded-pc.html
Relevancy 58.05%

So my son and I recently built his first desktop PC and installed Windows -bit OEM But it encounters BSODs regularly multiple times some days and not on other days Doesn't seem to matter if you're heavy gaming or just sitting there idle The BSODs seem PC w/Windows built Newly BSODs regularly OEM 8.1 to blaim all sorts of things page fault in nonpaged area win k sys system thread not handled memory managment So Newly built PC w/Windows 8.1 OEM regularly BSODs here is what we've tried a We've uninstalled everything we would consider Newly built PC w/Windows 8.1 OEM regularly BSODs optional Logitech camera Live Update from MSI MSI supercharger app Intel Smart Update etc b We're running MalwareBytes and scans come up clean on C SSD and E HDD c We're running AVG and scans come up clean on C SSD and E HDD d Windows Update Newly built PC w/Windows 8.1 OEM regularly BSODs has nothing for us and all drivers on the system BIOS everything are latest e We ran MemTest and got through passes with no errors I'm not sure what information would be useful for folks 've attached some of the files here Minidumplog output The last dmp files on the system speccy output Any suggestions on where we go next Thanks Bair

A:Newly built PC w/Windows 8.1 OEM regularly BSODs

Bair please remove that speccy.txt from your post, it reveals your valid Windows activation key and that should not be shared with any one.
 
If the same speccy.txt is in your dropbox remove that to.
 
Repost a new one if you wish, but make sure you remove your windows product key before you do.
 
In the meantime, I'll see if I can help you in a few minutes after I read through what you have already provided.
 
Bruce.

http://www.bleepingcomputer.com/forums/t/514884/newly-built-pc-wwindows-81-oem-regularly-bsods/
Relevancy 57.62%

I bought an ASUS G JH gaming laptop months ago and just started getting this random inexplicable error It's happened twice this last week and I have lost a considerable amount of unsaved work because of it What happened the first time was I put my laptop to sleep in order to do something else and when I came back it had shut down by itself After booting it back up the first thing that was displayed was the window in putting idling or computer after Random sleep BSODs to the images above I don't know if my computer actually had a BSOD before it shut down because I was not there to see what happened Second time this happened I just left my computer at idle without putting it to sleep Random BSODs after putting computer to sleep or idling and left the room My laptop is configured to go to screensaver after minutes and sleep after When I came back this time my power button was not blinking meaning the computer was not asleep but the monitor had shut off and could not be turned back on with the monitor on off toggle I had to manually restart the computer by holding the power button and when it booted back up again the same window appeared Yet again I don't know if my computer actually had a BSOD because this time the monitor was turned off Any ideas P S My system specs are in the sig below and I've attached the requisite zip file No components are overclocked or otherwise modified at the hardware or software level This is the OEM version of Windows that was pre-installed on my system but I did a reformat right after I got the computer

A:Random BSODs after putting computer to sleep or idling

Here's what my Action Center error reporting had to say about what happened:

First, "Windows stopped working"


Then, "Shut down unexpectedly"

http://www.sevenforums.com/bsod-help-support/207023-random-bsods-after-putting-computer-sleep-idling.html
Relevancy 57.62%

I'll make this short and sweet since I don't know when my next BSOD will be Last night my computer started making a random grinding sound and then blue screened This has happened once noise grinding BSODs Random computer my and sudden from before but hasn't happened for about a year No hardware changes have been made since I purchased the parts for this PC and very little changes software wise I did a system restore last night and that looked like it made a difference but it then blue screened once again about an hour later I've attached the logs gathered by the tool in the sticky thread at the top of the forum Thanks in advance for any help you can give EDIT since Random BSODs and sudden grinding noise from my computer posting this I've done the following Removed Qualcomm etheros killer network suite and replaced it with a driver Random BSODs and sudden grinding noise from my computer only version of the same software Removed Realtek hd audio driver Attempted to upgrade to windows only to blue screen and revert to Uninstalled my graphics Random BSODs and sudden grinding noise from my computer driver rebooted and reinstalled Panicked frequently Run defrag tools on both hard drives which took a very long time on my D drive I'm currently running chkdsk r on both drives which has been stuck on D for about an hour The buzzing sound I've been hearing is also a lot louder during the check could my HDD be dying

A:Random BSODs and sudden grinding noise from my computer

Hi RoastMaster,

Welcome to the 8forums

I would suggest to update the BIOS to the newest version to see if that makes a difference.
https://www.msi.com/Motherboard/supp...html#down-bios

Please cleanup your C: partition (move files to the D: partition is an option), you need a few dozen GB free on your C: partition for a few reasons.
1. The dumps created in the BSOD process may not be saved properly, because there is not enough free space.
2. If you want to upgrade you need 25-30GB free space at least, after the upgrade 20GB is used for a folder called Windows.Old which contains system files from the previous installation. There is also a few GB used for the installation files & logs what makes that you at least need 25GB free space to perform the upgrade. If you increase the free space to 25GB you would get problems after the upgrade is done for the reason that Windows needs a certain amount of free space to perform several tasks in the background so the user won't be bothered with it, the recommended amount of free space is 15% the size of the hard drive on each partition. Each partition so that each partition can be maintained.
This is why I would currently recommend a free space of at least 30GB if you're planning on upgrading.
If you're not planning on upgrading, about 20GB is more than enough free space

http://www.eightforums.com/bsod-crashes-debugging/75507-random-bsods-sudden-grinding-noise-my-computer.html
Relevancy 57.62%

Hello guys,

In the last month I've got a lot of BSODs that are giving me the chills.
I keep the computer on at all times as I run a web and mail server on it, play games, use it as an alarm, etc..
I have no idea what is causing them, hopefully you guys can help me crack it.

I'm running on Windows 7 Pro x64, latest SP and updates.
If you need any other info, I will gladly provide it. Thanks!

A:Random BSODs caused by ntoskrnl.exe either if computer is idle or not

Hi Kryse,

Welcome to the 7forums.

Please read BSOD Posting Instructions & How to upload files

http://www.sevenforums.com/bsod-help-support/383646-random-bsods-caused-ntoskrnl-exe-either-if-computer-idle-not.html
Relevancy 57.62%

Hello I recently ordered a new PC from an online company after my other PC broke they replaced the whole PC besides the old PSU and transferred all the HDD information to a new one the PC worked well for about a month and recently it's started having BSODs which leads me to believe it's driver related or maybe due to a program I have installed Is Windows - x -bit or x x - the original installed OS on the system Windows is the only one that's been installed on the system - an OEM or full retail version It was purchased from a company online that built the PC for me then sent it so I guess full retail - What is the age of system hardware The hardware is new as it's a recently bought PC - What is the age of OS installation have you re-installed the OS years now usage. Random computer gaming during and BSODs general I had a PC before with the same OS I just transfered it to a new one System Specs AMD Phenom tm II X T Processor Gigabyte Technology Co Ltd GA- GMA-UD H Award Modular BIOS v PG GB RAM Hitachi HDS CLA ATA Device Multiple Card Reader USB Device AMD High Definition Audio Device ATI Radeon HD Series Microsoft Windows Home Premium -bit Multiprocessor Free Service Pack If included the DMPs of the last few crashes if I have done anything wrong or you need more information please tell me and thank you for taking your time to help

A:Random BSODs during gaming and general computer usage.

Nice post Dandy 621
These crashes were caused by memory corruption/exception (Cx05) probably a driver.
Please run these two tests to verify your memory and find which driver is causing the problem.

* If you are overclocking anything reset to default before running these tests.
In other words STOP!!!

* If you have a Raid update its Driver.

Memtest.





Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5-7 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.



RAM - Test with Memtest86+


Driver Verifier






Quote:
Using Driver Verifier is an iffy proposition.
Most times it'll crash and it'll tell you what the driver is.
But sometimes it'll crash and won't tell you the driver.
Other times it'll crash before you can log in to Windows.
If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise.
Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
NOTE: You can use Low Resource Simulation if you'd like.
From my limited experimentation it makes the BSOD's come faster.
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

If you are using win 8 add these
- Concurrency Stress Test
- DDI compliance checking

Reboot the system and wait for it to crash to the Blue Screen.
Continue to use your system normally, and if you know what causes the crash, do that repeatedly.
The objective here is to get the system to crash because Driver Verifier is stressing the drivers out.
If it doesn't crash for you, then let it run for at least 36 hours of continuous operation.
Reboot into Windows (after the crash) and turn off Driver Verifier by going back in and selecting "Delete existing settings" on the first page, then locate and zip up the memory dump file and upload it with your next post.
If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.

Thanks to JCGriff2 & Usasma.

Sysnative Forums

Driver Reference Table (DRT)




Using Driver Verifier to identify issues with Windows drivers for advanced users

Driver Verifier

Using Driver Verifier (Windows Drivers)

http://www.sevenforums.com/bsod-help-support/229767-random-bsods-during-gaming-general-computer-usage.html
Relevancy 57.62%

This is my first computer build, completed in September. Desktop has been used infrequently but will need to be used daily here soon. This computer is primarily going to be used for flash animation and video editing.

There has been no pattern when receiving a BSOD. From what I can recall, I've gotten them:

1) Right after log in.
2) While running CeltX screenwriting software.
3) While running Anime Studio Pro 9.

Minidumps are attached. If you need any more information about my build, I'll try to answer.

Thanks for any of the help you can give me!

A:Random BSODs, New Computer Build, minidumps included

Welcome to Sevenforums

Perform a Clean boot:Troubleshoot Application Conflicts by Performing a Clean Startup
Take memtest in the following manner.

Test your RAM with Memtest86+. Run for 8 passes and test each stick in a know good slot for an additional 6 passes.
RAM - Test with Memtest86+





Quote:
The goal is to test all the RAM sticks and all the motherboard slots.

Check your motherboard manual to ensure the RAM sticks are in the recommended motherboard slots. Some motherboards have very specific slots required for the number of RAM sticks installed.

If you get errors, stop the test and continue with the next step.

1. Remove all but one stick of RAM from your computer (this will be RAM stick #1), and run Memtest86 again, for 7 passes. *Be sure to note the RAM stick, use a piece of tape with a number, and note the motherboard slot.
If this stick passes the test then go to step #3.

2. If RAM stick #1 has errors, repeat the test with RAM stick #2 in the same motherboard slot. *If RAM stick #2 passes, this indicates that RAM stick #1 may be bad. If you want to be absolutely sure, re-test RAM stick #1 in another known good slot.
*If RAM stick #2 has errors, this indicates another possible bad RAM stick, a possible motherboard slot failure or inadequate settings.
3. Test the next stick of RAM (stick #2) in the next motherboard slot. *If this RAM stick has errors repeat step #2 using a known good stick if possible, or another stick.
*If this RAM stick has no errors and both sticks failed in slot#1, test RAM stick #1 in this slot.
4. If you find a stick that passes the test, test it in all the other motherboard slots.

If Part 2 testing shows errors, and all tests in Part 3 show errors, you will need to test the RAM sticks in another computer and/or test other RAM in your computer to identify the problem.

In this way, you can identify whether it is a bad stick of RAM, a bad motherboard, or incompatibility between the sticks.


Errors are sometimes found after 8 passes.
Do this test overnight, before going to bed.
*How does the computer perform in Safe Mode?

http://www.sevenforums.com/bsod-help-support/267372-random-bsods-new-computer-build-minidumps-included.html
Relevancy 57.62%

Hello I could really use some help so thanks for reading I know it's long but any input is greatly appreciated If this is just too much to read I understand and feel free to skip to ISSUE below I will try to be very clear and keep this to just the facts because there are a decent number Newly homebuilt Win system OS on new GB SSD Mushkin Chronos PC 64 built 7 ? newly with please diagnosis to where on Win advise start BSODs Deluxe in AHCI mode Boots fine Internet fine downloads and installs fine After install connected older Western Digital Caviar GB drive containing data files documents zip files etc from old Win XP system Copying from the WD drive to SSD no problem Installing extracting to WD drive system back-up etc caused a few inconsistent instances where the drive experienced an error quot disappeared quot from Windows Explorer and I had to shut down and restart to get back This was the only error I experienced other than the BSODs BSODs with newly built Win 7 64 PC ? please advise on where to start diagnosis described below Once the system seemed somewhat stable other than above issue I downloaded newest drivers of those installed by the motherboard DVD slightly out of date or Win This is one place I could have gone wrong as I installed drivers from latest I could find on the Internet rather than from ASUS site mobo is ASUS P Z -V The reason for my using my older WD drive at all beyond preserving key data files from old PC was that the SSD is only GB and supposed to be reserved for OS and applications e g games where speed is meaningful So in part to preserve the SSD space I have I made some tweaks to Win Shrunk the page swap file shrunk system restore points and also moved them to WD GB drive turned off hibernate mode etc Those three were eating a lot of space I also disabled start-up applications and services I determined through experience and Internet research to be unnecessary like BSODs with newly built Win 7 64 PC ? please advise on where to start diagnosis Bluetooth support note I did not alter any Windows apps or services This is another area where I suppose I could have gone wrong What little I was doing with the system at that point seemed fine booting web surfing downloading etc So I installed the one game I wanted to try with this system that I've been playing lately Lord of the Rings Online LOTRO I installed LOTRO a bit unconventionally I simply copied my old game folder over that I'd had on my just-retired XP system and preserved on the WD GB drive to my new SSD Once there I ran the launcher which found the game installed a few critical set-up files detected DX new for this Win OS and ran the game No issues but this could also be where I went wrong ISSUE The game ran quite well better than on XP no surprise with the new hardware and OS But after playing for a time minutes to an hour it would Blue Screen of Death BSOD always with the message quot Page Fault in Non-Page Area quot The PC would then auto-restart without issue Additional note The game often makes a distinct short quot crackly quot sound shortly before BSOD which often always occurred when transitioning areas If I was to base a guess on instinct it feels like I've reached the end of my memory RAM video GPU RAM hard drive cache no idea and the game my PC can't manage it so BSOD Given the irregular issues I'd had earlier with the WD drive though the game was now running off of SSD the non-ASUS drivers I'd installed the alterations I'd made to Win and the unorthodox way I'd installed the game though others on the forum had done this moved OSs like I did and it worked fine I had no idea where to begin From what little research I could understand it could be the game my drivers or my hardware It would be one thing if I'd had the system up and stable and running similarly demanding applications then I could better determine the source of the issue But since the system is new and the game is far and away the most demanding application it has run I've n... Read more

A:BSODs with newly built Win 7 64 PC — please advise on where to start diagnosis

I figured out how to attach my various diagnostic report that should prove helpful to those more experienced than me. It contains the PERFMON report and other results.

Thank you.

http://www.techsupportforum.com/forums/f299/bsods-with-newly-built-win-7-64-pc-please-advise-on-where-to-start-diagnosis-621651.html
Relevancy 56.76%

My computer has been acting up in BSODs + Slowness General Random + Computer randomly rebooting the last couple of weeks and I have no idea if they're hardware or software malware related Recently I've done a full W reinstall on this new GB HD I've bought I've learned a few valuable lessons after clogging up the last HD with useless stuff I'm fairly sure this is not malware virus related but I'm not an expert and the only things I've done were a full MalwareBytes scan along with an Avast full scan I haven't visited any sketchy websites or downloaded any suspicious files First of all it has been randomly BSODing for the past couple of months I've gotten about half a dozen so far Honestly I ignored them at first because they were isolated so I don't remember any error messages if any all I remember is that it said something about Windows finding a critical error and having to shut the PC down for its own safety My PC is also generally sluggish for no apparent reason lately As I've said I've been trying to keep it clean in both ways and I REALLY doubt it's a Computer randomly rebooting + Random BSODs + General Slowness virus It gets specially sluggish after I exit games after playing them for at least one hour possible GPU CPU overheating problems I've also noticed that it started to stutter in games I used Computer randomly rebooting + Random BSODs + General Slowness to be able ot run just fine My browser also has been acting up lately Whenever there's an HD video it loads as it should according to the speed of my connection but actually clicking on the video and having it play is sometimes sluggish and very slow for no reason Finally my biggest issue right now is that my PC has been randomly rebooting outta nowhere for the last couple of weeks it's happened three or four times by now It doesn't just freeze then reboot itself it close any program that might be open shuts down then reboots itself as if I had manually done so I don't know if it's relevant but it has only happened while I was in-game Also as soon as the computer reboots that small icon on the bottom right that's supposed to warn you about Windows updates says something along these lines your computer has been rebooted in order to succesfully install the updates I'm not sure if it has happened EVERY TIME it self-rebooted I only noticed it on the last couple of times Like I've said this is a relatively new reinstall and I really doubt it's virus malware related but you can't never be too careful Here are my PC temps five minutes after the last reboot which happened while I was in-game hence the relatively high temp - note that I also live in a relatively hot place and my entire house is closed due to mosquitos Some further info about my PC I've ditched my old HD and installed W on this new one but everything else is several years old the RAM the CPU the GPU and the motherboard The GPU and CPU are both around six or seven years old Help

A:Computer randomly rebooting + Random BSODs + General Slowness

Download Security Check from here or here and save it to your Desktop. Double-click SecurityCheck.exe Follow the onscreen instructions inside of the black box. A Notepad document should open automatically called checkup.txt; please post the contents of that document.NOTE 1. If one of your security applications (e.g., third-party firewall) requests permission to allow DIG.EXE access the Internet, allow it to do so.NOTE 2. SecurityCheck may produce some false warning(s), so leave the results reading to me.NOTE 3. If you receive UNSUPPORTED OPERATING SYSTEM! ABORTED! message restart computer and Security Check should run Please download Farbar Service Scanner (FSS) and run it on the computer with the issue.Make sure the following options are checked:
Internet ServicesWindows FirewallSystem RestoreSecurity Center/Action CenterWindows UpdateWindows DefenderOther ServicesPress "Scan".It will create a log (FSS.txt) in the same directory the tool is run.Please copy and paste the log to your reply. Please download MiniToolBox and run it.Checkmark following boxes:Report IE Proxy SettingsReport FF Proxy SettingsList content of HostsList IP configurationList Winsock EntriesList last 10 Event Viewer logList Installed ProgramsList Devices (do NOT change any settings here)List Users, Partitions and Memory sizeList Restore PointsClick Go and post the result. Please download Malwarebytes Anti-Malware (MBAM) to your desktop.NOTE. If you already have MBAM 2.0 installed scroll down.Double-click mbam-setup-2.0.0.1000.exe and follow the prompts to install the program.
At the end, be sure a checkmark is placed next to the following:

Launch Malwarebytes Anti-MalwareA 14 day trial of the Premium features is pre-selected. You may deselect this if you wish, and it will not diminish the scanning and removal capabilities of the program.
Click Finish.On the Dashboard, click the 'Update Now >>' linkAfter the update completes, click the 'Scan Now >>' button.
Or, on the Dashboard, click the Scan Now >> button.If an update is available, click the Update Now button.
A Threat Scan will begin.When the scan is complete, if there have been detections, click Apply Actions to allow MBAM to clean what was detected.In most cases, a restart will be required.Wait for the prompt to restart the computer to appear, then click on Yes.If you already have MBAM 2.0 installed:On the Dashboard, click the 'Update Now >>' linkAfter the update completes, click the 'Scan Now >>' button.
Or, on the Dashboard, click the Scan Now >> button.If an update is available, click the Update Now button.
A Threat Scan will begin.When the scan is complete, if there have been detections, click Apply Actions to allow MBAM to clean what was detected.In most cases, a restart will be required.Wait for the prompt to restart the computer to appear, then click on Yes.How to get logs:(Export log to save as txt)After the restart once you are back at your desktop, open MBAM once more.Click on the History tab > Application Logs.Double click on the Scan Log which shows the Date and time of the scan just performed.Click 'Export'.Click 'Text file (*.txt)'In the Save File dialog box which appears, click on Desktop.In the File name: box type a name for your scan log.A message box named 'File Saved' should appear stating "Your file has been successfully exported".Click OkAttach that saved log to your next reply.(Copy to clipboard for pasting into forum replies or tickets)After the restart once you are back at your desktop, open MBAM once more.Click on the History tab > Application Logs.Double click on the Scan Log which shows the Date and time of the scan just performed.Click 'Copy to Clipboard'Paste the contents of the clipboard into your reply.Download Malwarebytes Anti-Rootkit (MBAR) to your desktop.Warning! Malwarebytes Anti-Rootkit needs to be run from an account with administrator rights.Double click on downloaded file. OK self extracting prompt.MBAR will start. Cli... Read more

http://www.bleepingcomputer.com/forums/t/572110/computer-randomly-rebooting-random-bsods-general-slowness/
Relevancy 56.33%

Hello I suspect I have some malware problem I am a novice so all I have been able to do is follow your instructions in providing logs using the software you have suggested Logfile of Trend Micro HijackThis v Scan saved at on Platform Windows Vista SP WinNT MSIE Internet Explorer v Boot mode Normal Running processes C Windows system Dwm exe C Windows Explorer EXE C Program Files computer messages random .dll BSODs, error on malaise startup, general Windows Defender MSASCui exe C Windows system taskeng exe C Windows System hkcmd exe C Windows System igfxpers exe C Windows System WLTRAY EXE C Program Files Common Files aol ee aolsoftware exe C Program Files Kontiki KHost exe C Program Files iTunes iTunesHelper exe C Windows system igfxsrvc exe C Program Files Avira AntiVir Desktop avgnt exe C Program Files SigmaTel C-Major Audio WDM sttray exe C Program Files Common Files Java Java Update jusched exe C Program Files DivX DivX Update DivXUpdate exe C Program Files Google GoogleToolbarNotifier GoogleToolbarNotifier exe C Program Files Dell Support Center bin sprtcmd exe C Program .dll error messages on startup, random BSODs, general computer malaise Files Common Files InstallShield UpdateService ISUSPM exe C Program Files Samsung Samsung .dll error messages on startup, random BSODs, general computer malaise New PC Studio NPSAgent exe C Program Files Windows Media Player wmpnscfg exe C Program Files Digital Line Detect DLG exe C Program Files Dell QuickSet quickset exe C Windows system wbem unsecapp exe C Program Files Google Chrome Application chrome exe C Program Files Google Chrome Application chrome exe C Windows system wuauclt exe C Users farhad chowdhury Desktop Desktop HijackThis exe C Program Files Mozilla Firefox firefox exe R - HKCU Software Microsoft Internet Explorer Main Default Page URL http www google co uk ig dell hl en amp client dell-usuk amp channel uk amp ibd R - HKCU Software Microsoft Internet Explorer Main Search Page http go microsoft com fwlink LinkId R - HKCU Software Microsoft Internet Explorer Main Start Page http search conduit com SearchSource amp ctid CT R - HKLM Software Microsoft Internet Explorer Main Default Page URL http www google co uk ig dell hl en amp client dell-usuk amp channel uk amp ibd R - HKLM Software Microsoft Internet Explorer Main Default Search URL http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Main Search Page http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Main Start Page http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Search SearchAssistant R - HKLM Software Microsoft Internet Explorer Search CustomizeSearch R - HKCU Software Microsoft Internet Explorer SearchURL Default http search aol co uk web isinit true amp query s R - HKCU Software Microsoft Internet Explorer Main Window Title Internet Explorer provided by Dell R - HKCU Software Microsoft Windows CurrentVersion Internet Settings ProxyOverride local R - HKCU Software Microsoft Internet Explorer Toolbar LinksFolderName R - URLSearchHook no name - f -f f - -bac -e ec e - no file O - Hosts localhost O - BHO Yahoo Toolbar Helper - D -C F - EFB- B - ECA - C Program Files Yahoo Companion Installs cpn yt dll O - BHO AVG Safe Search - CA F - F E- B -A E- E E C C - C Program Files AVG AVG avgssie dll file missing O - BHO no name - C C A-E - b - D - CECB - no file O - BHO UrlHelper Class - D EBF- B - A - ED - FA FE - C Program Files BearShare Applications BearShare MediaBar BearShareIEHelper dll O - BHO Search Helper - EBF - F- bff-A F-B E AAC B - C Program Files Microsoft Search Enhancement Pack Search Helper SEPsearchhelperie dll O - BHO IEHlprObj Class - CA ED -F FB- -A - E - C Program Files iWin Games iWinGamesHookIE dll O - BHO Windows Live ID Sign-in Helper - D - C - ABF- ECC- C - C Program Files Common Files Microsoft Shared Windows Live WindowsLiveLogin dll O - BHO no name - f -f f - -bac -e ec e - no file O - BHO Google Tool... Read more

A:.dll error messages on startup, random BSODs, general computer malaise

Hi there,
Just wondered if you tech guys have had the opportunity to look at my post. Would be most grateful for your assistance
 

https://forums.techguy.org/threads/dll-error-messages-on-startup-random-bsods-general-computer-malaise.977913/
Relevancy 56.33%

Hello Friends I am currently experiencing issues with my computer that has windows installed Recently it has been randomly freezing forcing me to restart it or blue screening When the computer reboots it falls into a repeat cycle of Blue screening into rebooting until the trouble shooting Cycles into Random BSOD Reboots Repeated as PC Computer freezes/BSODs menu is reached I have attempted to do a system restore but the process failed The details of the failure were quot System restore failed to extract the original copy of the directory from the restore point Source ProgramFiles WindowsApps Destenation AppxStaging System Restore ran out of disk space while restoring your files quot After a while of continually restarting my computer it occasionally gets to the log in screen and will either blue screen again or run normally depending on whether or not i'm lucky The attached dump is from yesterday I've had a couple more blue screens since I would appreciate any help Just let me know if you need any more information Thanks YELLYPHISH-Mon zip Random Computer freezes/BSODs into Repeated BSOD Cycles as PC Reboots

http://www.tenforums.com/bsod-crashes-debugging/53263-random-computer-freezes-bsods-into-repeated-bsod-cycles-pc-reboots.html
Relevancy 55.04%

Hello in random with processes Random random BSODs errors/bugchecks everyone I m stuck with a very frustrating BSOD problem and from the look of it it seems like some kind of harware failure Thing is I ve replaced almost everything but the BSODs refuse to go The BSODs are completely random but playing a current generation game Arkham Asylum GRID would guarantee a crash within an hour Mass Effect though runs for many hours at Random BSODs with random errors/bugchecks in random processes a stretch sometimes Analyzing my dumps told me that the crashes were totally random Page faults the irq not less than equal one the driver irq not less than equal one and the bugcheck codes were pretty random too Even the faulting processes were anything from ntoskrnl to npfs to my ati driver just about anything I like fixing my own problems plus I m impatient My temperatures were within limits so I assumed it was the RAM and got myself new corsair GB chips just to be sure Random BSODs with random errors/bugchecks in random processes But the BSODs continued So it s not the RAM the motherboard Graphic card and the PSU are brand new anyway The only thing left was the processor but they almost never go bad or so I thought The real clue was when one of the dumps was found to be corrupt by the debugger Reading up on that told me that it could be a processor issue So I borrowed a Xeon from a friend to test Well guess what The BSODs have almost gone At least I can work in peace now though the Xeon is painfully slow I say almost because I DID get one BSOD since I put the Xeon about a week back My friend tells me that I could have mismatched ram timings and that my old processor might not be at fault at all Route I need help I want to get rid of the Xeon and get something faster However how can I make sure that it was a processor issue in the first place Can you help me check my ram timings or whatever else it might be I still did get ONE BSOD even with the Xeon What if I get another processor but the BSODs continue I ve attached the last few minidumps The latest file is the one that happened with the Xeon I ll be so so grateful if someone can figure annything out from these dumps I have a feeling I ve spent a LOT of money on an otherwise easily fixable problem blackeye nbsp

A:Random BSODs with random errors/bugchecks in random processes

Your dumps came up with errors 0x8E / 0xD1 / 0xA etc. each dump citing different / random process being responsible for instance in question.

Such errors do and can occur due to mismatch RAM timings or incorrect voltage settings. I'll advise you to check specs of your (i.e. timings + voltage) and see whether settings in BIOS are correctly matching these.

Secondly, sometimes even the settings are matching you may still need to fiddle around with voltage settings (incrementally) and see whether that stabilize the system.

Lastly, do stress test your graphic card with OCCT, because one of the dumps came up with 0xc5 as 1st argument, which usually happen due to acceleration issues of graphics. Regards
 

http://www.techspot.com/community/topics/random-bsods-with-random-errors-bugchecks-in-random-processes.154392/
Relevancy 53.32%

I just built my first PC and I've been getting random BSOD. I'm not doing anything in particular when they happen. Sometimes it's when I connect my headset...other times were when I opened a program. Once I was trying to access my yahoo mail and I got a message about shockwave player failed to launch and then my PC blue screened on me. Would really like to know what I need to do to fix this. This PC is only 3 days old as I have just built it. Any help would be appreciated...thanks!

A:Random BSOD on a newly built PC.

Hello and welcome III mate in the dump files there are refrences to a drive problem so can you run these in safe mode for starters
http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html
http://www.sevenforums.com/tutorials/433-disk-check.html < if necessary include the /f and /r in the command line as per Option2
I would suggest you leave only the C: drive as the one connected to the board.

http://www.sevenforums.com/bsod-help-support/361283-random-bsod-newly-built-pc.html
Relevancy 53.32%

Hey Guys,

Recently i've started expierenceing random crashes on my pc i just built... it just started 2 days ago... i've had the computer built for probably a good month now and it just started this...

While playing any game it'll just up and shut off... it wont reboot just shut off

should i try and replace the Cpu coolin gel? new Heatsink?

here are the specs:
Gigabyte GA-K8NS Mobo
AMD 64 3200+
Corsair Value 1Gb Memory (512x2)
Connect3D Radeon 9550 256mb Video
Creative Sound Blaster Live LS
Seagate 80gb HD
Diablo Case 450w PSU (1 side exhaust fan)

Any help would be GREATLY accepted!!
PS - hehe yes i know i scrempt on a few things but it was tough gettin the money! LOL
 

Relevancy 53.32%

Hello,

I recently built this PC about half a month ago and have been using it since with no major issues until now. I was playing Borderlands Presequel for 30 minutes, exited it, and then went to go watch a YouTube video. About 5 seconds into the video, the audio started stuttering and then it immediately BSOD'd. I've played more resource-intensive games prior to this (Witcher 3, for example) without problems.

I've attached the diagnostic file below. Hopefully, someone is able to detect the cause of this issue and that it's a driver-related problem rather than hardware. Thank you in advance!

A:First Random BSOD on Newly-Built PC

Hi touchtoplay.

The zip you uploaded does not contain any crash dump.

Follow it: Dump Files - Configure Windows to Create on BSOD
Go to Option Two, Point 2. Download the .reg file and merge it in registry by double clicking it.

Now wait for another BSOD. When it occurred, search the .dmp files manually in the default path: C:\Windows\Minidump or %SystemRoot%\Minidump. See if the crash dump is recorded or not (hopefully it will be recorded).Post it following the Blue Screen of Death (BSOD) Posting Instructions.

Dont run any disc cleanup tool before you upload another zip.

http://www.sevenforums.com/bsod-help-support/372770-first-random-bsod-newly-built-pc.html
Relevancy 52.46%

Hi, I recently just did a clean install of Windows 10 and I have gotten a few BSOD. Ive attached the minidumps as requested. Please help me out. Thanks in advance!

http://www.tenforums.com/bsod-crashes-debugging/50835-random-bsod-newly-installed-win10.html
Relevancy 52.46%

I was given some money to buy new parts for my antec 180 case computer

new stuff:

e4600
evga 680i SLI
700watt toughpower psu
CORSAIR XMS2 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel

old parts:

6800GT
SB LIVE Audigy

Well my initial issue with the machine was the cpu getting to 80c when merely loading/running WoW and being around 47-60c idle. I took off the heatsink removed their crap stock paste and added my own. It went down to 22-28c idle and about 30-35c while in WoW. But I noticed some weird flickering every 20-30 minutes or so. And after a few hours of use the computer would hang while in game or out. GPU is running pretty hot 62c idle. But I was told the hanging would be associated with the CPU/RAM. Any ideas?
 

https://forums.techguy.org/threads/random-hangs-occuring-on-newly-built-pc.671351/
Relevancy 52.46%

Hi,

Last week we built 4 new client for our renderfarm. They all have the same specs but one of them is acting strange. It restarts from BSOD approx. once a day and has been doing that for about a week now.

Grateful if someone would want to take a look at the crashdump.

Thanks in advance!

A:Random BSOD on newly built Renderfarm.

Hi,

Please post the following information:

Windows Genuine and Activation Issue Posting Instructions

Cheers

Dave

http://www.sevenforums.com/bsod-help-support/277470-random-bsod-newly-built-renderfarm.html
Relevancy 52.46%

I have a new system build with Windows OS ASRock FX Extreme AMD FX Black Edition GB Toshiba ATA HD EVGA W PSU AMD Radeon HD Graphics Card and GB DDR - Crucial RAM sticks that reboots 7 System Random on Newly Win Built Reboot randomly I can have the system sitting idle for a period of time Hours and then when I wake the Random Reboot on Newly Built Win 7 System system it may or may not reboot I have noticed that the only consistency is when I may have multiple instances of VLC going and or several tabs open on google I have been able to fairly consistently reproduce the problem with the multiple instances of VLC However if I uninstall VLC this does not resolve my problem I initially started with a W PSU and had read multiple threads stating that it could be a faulty or under-powered PSU so I purchased the w PSU Additionally I had read to try not allow the Hard drive to sleep by adjusting the advance power management and setting it to Never This has had no effect either on the system I did attempt to run memtest over night but it displayed Pass the following morning I will run this again tonight and post results Any help would be greatly appreciated as I have spent a couple of month trying to resolve this I am considering a clean install to see if this may help

A:Random Reboot on Newly Built Win 7 System

Please perform the following:

1. Download and save this tool to your desktop:
http://go.microsoft.com/fwlink/?linkid=52012

2. Run the tool, and then click Copy - ignore any errors if they appear

3. Use CTRL+V to paste the unedited results of the tool here in your next reply

http://www.sevenforums.com/general-discussion/314398-random-reboot-newly-built-win-7-system.html
Relevancy 52.46%

Hey guys any information you can give me would be great. I built this machines and it's had BSOD out of the box so i'm thinking a piece of hardware might be the cause. I ran memtest86 and it showed 0 erroes. Here is the zip file.

http://www.sevenforums.com/bsod-help-support/387213-bsod-random-times-newly-built-pc.html
Relevancy 52.46%

Since Feb to today Feb I've been getting Blue Screens these appear to be completely random each time with different stop codes and according to Blue Screen Veiw are caused by different files For example Caused by ntkrnlpa exe or atikmdag exe or ks sys or USBPORT SYS or dxgkrnl sys or dxgmms sys At times I'm unable to do anything on the my PC as these are known to happen before Windows logs me in Attached the Blue Screen View records of the BSODs trying BSODs Files with Differing Codes Random Stop by Random Caused to figure out how to open dmp up to Feb Most recently it was the ks sys that caused the BSOD but Random BSODs Caused by Random Files with Differing Stop Codes no file was created nor does it appear in Blue Screen View I know what these files are rooted to but neither Windows Update nor any driver update has solved the issue hence my post here Activity on the PC doesn't Random BSODs Caused by Random Files with Differing Stop Codes seem to be a factor as the BSODs have occurred while I've been playing games watching DVDs listening to MP s browsing the web editing pictures on the PC I can do anything and at some point a BSOD is guaranteed to happen They also occur randomly as yesterday Feb I was able to play games until and then I was unable to log back into Windows because Random BSODs Caused by Random Files with Differing Stop Codes of back to back BSODs while the day before I was unable to do much because of the frequency of the BSODs I've installed and re-installed a dozen times over and run the updates and done disk scans and defrags and virus scans and run Windows System Repair and nothing has helped I'm at my wits end here and don't know what else to do I suspect it could be hardware faults as my PC is at least years old

A:Random BSODs Caused by Random Files with Differing Stop Codes

If you performed the above task then my guess is it may be hardware related, When you mentioned Re-installed are you refering to the operating system? If so have you deleted the old Partition and recreated a new one prior to installing windows?

http://www.sevenforums.com/bsod-help-support/279625-random-bsods-caused-random-files-differing-stop-codes.html
Relevancy 52.46%

Hi folks Thought Windows random 7 - redirects, malware, random freezes browsing BSoDs, I may need to start a new thread I noticed Windows 7 - malware, random BSoDs, browsing redirects, random freezes other threads have similar issues to what I m seeing and didn t want to confuse by re-posting in the same thread I have Windows Enterprise and just started having many random windows blue screens I think it started as soon as I tried to run a trainer for a game Company of Heroes since McAfee said it was a trojan and I tried to restore it after seeing online by other folks that the file was legit Anyway since then I think i started to see many BSoDs not always the same BSoD message and they would occur during normal windows usage a few times in Safe mode with networking But most of the time usually within to min of running normally Anyways I ran the McAfee virusscan and it found a few viruses also ran spybot and malware bytes and Stinger I ran them from safe mode and was able to clean out the affected files I still see fewer BSoDs but mainly now my google chrome browser won t work I ve tried uninstall reinstall and every time I load it it never works sometimes freezes and I have to do a hard power off on on my laptop I have a lenovo w Other problems is that my windows randomly freezes Also so far I can use Internet Explorer and Firefox not able to install Opera But when using Firefox or IE i sometimes get random redirects I have ran hijackthis and can provide the log file I can also provide the windows minidump files Please help I greatly appreciate the help Regards

A:Windows 7 - malware, random BSoDs, browsing redirects, random freezes

Hello and Welcome to the forums! My name is Gringo and I'll be glad to help you with your computer problems. Somethings to remember while we are working together.Do not run any other tool untill instructed to do so!Please Do not Attach logs or put in code boxes.Tell me about any problems that have occurred during the fix.Tell me of any other symptoms you may be having as these can help also.Do not run anything while running a fix.We apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.Click on the Watch Topic Button and select Immediate Notification and click on proceed, this will help you to get notified faster when I have replied and make the cleaning process faster.In order for me to see the status of the infection I will need a new set of logs to start with.Please print out or make a copy in notpad of any instructions given, as sometimes it is necessary to go offline and you will lose access to them.DeFogger: Please download DeFogger to your desktop.

Double click DeFogger to run the tool.
The application window will appear Click the Disable button to disable your CD Emulation drivers Click Yes to continue A 'Finished!' message will appear Click OKDeFogger may ask you to reboot the machine, if it does - click OKDo not re-enable these drivers until otherwise instructed.Download DDS:Please download DDS by sUBs from one of the links below and save it to your desktop:
Download DDS and save it to your desktop

Link1
Link2
Link3

Please disable any anti-malware program that will block scripts from running before running DDS.

Double-Click on dds.scr and a command window will appear. This is normal.Shortly after two logs will appear:
DDS.txt Attach.txtA window will open instructing you save & post the logsSave the logs to a convenient place such as your desktopCopy the contents of both logs & post in your next replyScan With RKUnHookerPlease Download Rootkit Unhooker Save it to your desktop.Now double-click on RKUnhookerLE.exe to run it.Click the Report tab, then click Scan.Check (Tick) Drivers, Stealth,. Uncheck the rest. then Click OK.Wait till the scanner has finished and then click File, Save Report.Save the report somewhere where you can find it. Click Close.Copy the entire contents of the report and paste it in a reply here.Note** you may get this warning it is ok, just ignore"Rootkit Unhooker has detected a parasite inside itself!It is recommended to remove parasite, okay?""just click on Cancel, then Accept".information and logs:In your next post I need the following

.logs from DDSlog from RKUnHookerlet me know of any problems you may have hadGringo

http://www.bleepingcomputer.com/forums/t/375946/windows-7-malware-random-bsods-browsing-redirects-random-freezes/
Relevancy 52.46%

Hey guys first post on here after about a week of solid research and forehead-to-screen bashing and a few months of increasingly more frequent issues trying to figure out what is wrong with this computer Here's the specs OS - Vista Home Premium SP x What crashes, KILL WANT random Multiple BSODs, hard freezing, random TO was original installed OS on system -Probably sometime in Here is what the computer originally was iBUYPOWER Gamer Gears of War Desktop PC - Newegg com iBUYPOWER Core Quad GB DDR Multiple BSODs, random hard freezing, random crashes, WANT TO KILL GB HDD Capacity Desktop PC Windows Vista Home Premium -bit Battle Gear X - Newegg com same one but has some feedback purchased All of the basic hardware is original except for the stuff listed in the Other Info section below Is the OS an OEM version came pre-installed on system or full retail version YOU purchased it from retailer -pre-installed in the computer IIRC Age of system hardware - Age of OS installation - have you re-installed the OS - No reinstall if memory serves me Multiple BSODs, random hard freezing, random crashes, WANT TO KILL right CPU -Core Quad Q Video Card -Sparkle GT SPARKLE SX GT D -HP GeForce GT GB -bit GDDR PCI Express x HDCP Ready SLI Support Video Card - Newegg com may possibly be a GB but I haven't looked at in a long time I'll double check tomorrow MotherBoard -P Q ASUS P Q LGA Intel P ATX Intel Motherboard - Newegg com Power Supply - brand amp wattage - watt I'll get specs on it tomorrow System Manufacturer -iBuyPower Exact model number if laptop check label on bottom -Gamer Gears of War or Battle Gear X same specs ordered back when it was called the Other Info Memory - GB Corsair XMS CORSAIR GB x GB XMS PC - DDR MHz CL - - - V SDRAM DIMM Non-ECC AVADirect Custom Computer Component HDDs -Boot drive Hitachi GST Deskstar K HDS KLA A GB RPM MB Cache SATA Gb s quot Hard Drive - Newegg com came with computer running since seems to me that it was listed as being rpm somewhere but maybe not -storage drive Western Digital WD Black WD FALS TB RPM MB Cache SATA Gb s quot Internal Hard Drive - Newegg com running since -storage drive Hitachi GST Deskstar HD IDK K S TB RPM MB Cache SATA Gb s quot Internal Hard Drive - Newegg com open box running since -storage drive Seagate Barracuda ST AS Internal Hard Drive - Newegg com running since Case -http www newegg com Product Product aspx Item N E Soundcard -http www newegg com Product Product aspx Item N E since CPU cooler Thermalright IFX- CPU Cooler at Xoxide running passive now had three scythe ultra kaze s on it when i had this processor maxed out at a GHz OC but bearings all burnt out and I've had all BIOS settings back to stock for a good year or so DVD drive ASUS Model DRW- B ST BLK B AS X DVD Burner - Bulk Black - Newegg com since Mouse -http www newegg com Product Product aspx Item N E Keyboard -http www ebay com itm Brand-New-in-Box-HP-PS- -Multimedia-Keyboard- - - - - - I've had this for probably years and it has outperformed gaming keyboards that I purchased at various points throughout that time to the extent that I returned all of them within a few days of receiving them Issues I've been having -Randomly freezes mouse and keyboard lights turn off HDDs silent computer unresponsive -BSODs or partially loaded UI then auto-shutdown upon waking computer from sleep from the night before -The other day it hard froze when copying a large amount of files from multiple HDDs onto my external hard drive which it's never done before -Today it BSOD'd at around optimizing defragging with Auslogics Disk Defrag -It's been randomly freezing and being an otherwise grumpy little b for a few months -Can't get into the User Accounts control panel menu without the computer auto-restarting no BSOD Haven't tried it in a couple of days though -others I can't think of at the moment Some Stuff I've done to try to fix it -I read somewhere that CPUCool messes with the drivers when installed and it can mess some stuff up I ha... Read more

Relevancy 52.03%

Hey folks.

Acer AS4830TG-6808
Win7 Home Premium x64 Acer OEM
Machine is less than a month old
Added 4GB Ram stick (PNY, now total of 8GB)

Have been getting random BSODs over the last week or so. I'm not sure of the reasoning, however I suspect it may be gaming related. Errors began while running Call of Duty MW3 via Steam, now they've gotten out of hand - random crashes during normal, non-gaming related tasks. I'm just not sure at this point what's going on (after much Googling). Any help is appreciated - ask away with questions for me... I like to think I'm pretty savvy.

Thanks in advance everyone!!

A:Random BSODs during random tasks. Latest error: 0x1000007e

You have a lot of software running that is probably not necessary. Troubleshoot Application Conflicts by Performing a Clean Startup and only have avast! set to run on startup and in services.

Regarding avast!, your current installation may be corrupted or old; avast! was blamed in a few of your crashes. I would suggest uninstalling with the avast! uninstall utility, downloading a fresh, up to date copy, and then installing the fresh copy. If that does not resolve the avast! related crashes, I may ask you to remove it with the avast! uninstall utility and replace it with Microsoft Security Essentials - Free Antivirus for Windows to test.
Post a screenshot of what you have in device manager under IDE ATA/ATAPI controllers (Start Menu -> Control Panel -> Hardware and Sound -> Device Manager)
Many of your crashes were DirectX/graphics card related. DirectX comes installed with Windows, so this may indicate Windows corruption. It may also be that you have corrupted drivers or a graphics card hardware problem.
If you are overclocking any hardware, please stop.

Check Windows for corruption. Run SFC /SCANNOW Command - System File Checker up to three times to fix all errors with a restart in between each. Post back if it continues to show errors after a fourth run or if the first run comes back with no integrity violations. Use OPTION THREE of SFC /SCANNOW Command - System File Checker to provide us with the sfcdetails.txt file if errors occur.
Follow the steps for Diagnosing basic problems with DirectX. To re-install your display card drivers as outlined in the DirectX link, use the following steps.
Download the drivers you want for your display card(s)
Click Start Menu
Click Control Panel
Click Uninstall a program
For NVIDIA:Uninstall the NVIDIA Graphics Driver (this should uninstall all NVIDIA software and drivers)
Restart your computer
Make sure NVIDIA 3D Vision Driver, NVIDIA 3D Vision Video Player, NVIDIA HD Audio Driver, and NVIDIA PhysX System Software are not still listed under Uninstall a program through Control Panel
If any remain of the above, uninstall one at a time
If asked to restart after uninstalling any of the above, do so, and continue uninstalling any remaining NVIDIA items until all are removed

For AMD:Uninstall AMD Catalyst Install Manager if it is listed (this should remove all AMD graphics software and drivers)
If AMD Catalyst Install Manager is not listed, use the following method to uninstall the graphics drivers (this applies to onboard graphics, as well):Click Start Menu
Right Click My Computer/Computer
Click Manage
Click Device Manager from the list on the left
Expand Display adapters
Do the following for each adapter (in case you have multiple display cards)Right click the adapter
Click Uninstall (do not click OK in the dialog box that pops up after hitting Uninstall)
Put a tick in Delete driver software for this device (if this option is available, otherwise just hit OK) and hit OK

Alternatively:Login as an adminstrative user
Click Start Menu
Click Control Panel
Click Hardware and Sound
Click Device Manager (the last link under Devices and Printers)
Expand Display adapters
Do the following for each adapter (in case you have multiple display cards)Right click the adapter
Click Uninstall (do not click OK in the dialog box that pops up after hitting Uninstall)
Put a tick in Delete driver software for this device (if this option is available, otherwise just hit OK) and hit OK

Restart your computer after uninstalling drivers for all display cards
Install the driver you selected for the display cards once Windows starts

http://www.sevenforums.com/bsod-help-support/232626-random-bsods-during-random-tasks-latest-error-0x1000007e.html
Relevancy 52.03%

just newly upgraded my old pc from xp to vista...

and after the install i do get random crash and then my pc restarts..

this is the problem info i was able to get
*********************************************
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.0.6000.2.0.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 1000008e
BCP1: 80000003
BCP2: 81848E1C
BCP3: 997CFCAC
BCP4: 00000000
OS Version: 6_0_6000
Service Pack: 0_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\Mini042209-01.dmp
C:\Users\Mark\AppData\Local\Temp\WER-69531-0.sysdata.xml
C:\Users\Mark\AppData\Local\Temp\WER4B57.tmp.version.txt
*********************************************

A:Newly installed vista random crash and restart

Hi -

The bugcheck 0x8e = kernel mode app generated an exception.

0x80000003 = exception - a hard-coded break was hit during progtam execution. This means a "checked" build - one used by software developers that contains added debugging "breaks".

Did you use the Microsoft Vista upgrede DVD and begin your upgrade from within XP?

Regards,

jcgriff2

.

http://www.techsupportforum.com/forums/f299/newly-installed-vista-random-crash-and-restart-369267.html
Relevancy 52.03%

Hello to whoever can help me newly 7 BSOD's Random windows pc on built running This is my first post on this forum so I'll do my best to follow instructions carefully if you could just bear with me So I built this new PC last tuesday and since the moment we got it up and running it's been experiencing seemingly random BSOD crashes Sometimes it will run for hours with no problems before a crash and sometimes it'll crash minutes after booting up It's crashed while I was surfing the web playing a game off of Steam and even while I was just listening to music Random BSOD's on newly built pc running windows 7 I'm running off a clean install of a brand new copy of Windows Home Premium x with SP installed on it I've reinstalled it twice now but to no avail You can check my computer specs in my profile but again - Motherboard ASRock M A DE AMD SB Chipsets Processor AMD Phenom tm II X Processor GHz Memory Corsair XMS GB DDR x GB Graphics Card nVIDIA GeForce GTX PSU Rosewill Value RV - W I've been Random BSOD's on newly built pc running windows 7 following jcgriff 's BSOD Posting Instructions as closely as possible and I've hopefully attached the correct zip file Thanks again to whoever can give me a hand with this

A:Random BSOD's on newly built pc running windows 7

having a look

edit1: while i'm having a look. do you have an antivirus system. because it's saying you don't have one installed...(don't worry if you do have one installed)

http://www.techsupportforum.com/forums/f299/random-bsods-on-newly-built-pc-running-windows-7-a-566994.html
Relevancy 52.03%

Greetings all,

I am helping my step-uncle build a new computer. We got everything put together, turn on the computer, the computer will boot up and then within 2 minutes will just shut off. The most it has stayed on is 5 minutes before it would shut it self off. The computer doesnt even have an OS on it yet.

System Specs:

AMD Athlon Xp 3200
DFI NFII Ultra B Motherboard
Diamond Stealth S100 - Radeon 9600SE 128mb Vid Card
1024gb PC 3200 Ram
Creative Blaster V.92 Modem
Emprex 8x DVD RW
Western Digital 120gb harddrive
Raidmax 420w PSU

There are no errors or any warning. It just powers down. Any help you guys can offer will be much appreciated. Thanks.
 

A:Newly built comp - random shut offs

Hey that is interesting question

try this

Go in bio

find PC Health or find any bio that have monitoring temperature

if found, change target cpu temp in disable, change cpu temp shut down in disable to stop random shut down
 

http://www.techspot.com/community/topics/newly-built-comp-random-shut-offs.12044/
Relevancy 51.6%

Getting random BSODS from 5 times a week to 2 times a week to 0 times a week its really random and i hope the files can describe the issue.

A:Random BSODs with random intervals (have files from SF diagnostics)

Hi justicar.

Uninstall Panda Free Antivirus using the tool supplied here.

Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.

Let us know for any further BSOD.
______________________________________

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 50, {fffff8a0120b202c, 0, fffff88006643be0, 0}

*** WARNING: Unable to verify timestamp for NNSStrm.sys
*** ERROR: Module load completed but symbols could not be loaded for NNSStrm.sys

Could not read faulting driver name
Probably caused by : NNSStrm.sys ( NNSStrm+36be0 )

Followup: MachineOwner
---------

1: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced. This cannot be protected by try-except,
it must be protected by a Probe. Typically the address is just plain bad or it
is pointing at freed memory.
Arguments:
Arg1: fffff8a0120b202c, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffff88006643be0, If non-zero, the instruction address which referenced the bad memory
address.
Arg4: 0000000000000000, (reserved)

Debugging Details:
------------------
Could not read faulting driver name

READ_ADDRESS: GetPointerFromAddress: unable to read from fffff80003303100
GetUlongFromAddress: unable to read from fffff800033031c0
fffff8a0120b202c Paged pool

FAULTING_IP:
NNSStrm+36be0
fffff880`06643be0 488b040a mov rax,qword ptr [rdx+rcx]

MM_INTERNAL_CODE: 0

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

BUGCHECK_STR: 0x50

PROCESS_NAME: System

CURRENT_IRQL: 0

ANALYSIS_VERSION: 6.3.9600.17237 (debuggers(dbg).140716-0327) amd64fre

TRAP_FRAME: fffff880009d76e0 -- (.trap 0xfffff880009d76e0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=000007fffff60000 rbx=0000000000000000 rcx=000007fffff60000
rdx=fffff0a01215202c rsi=0000000000000000 rdi=0000000000000000
rip=fffff88006643be0 rsp=fffff880009d7878 rbp=fffffa8006ee88e4
r8=000000000000005a r9=0000000000000002 r10=fffff880009d7518
r11=000007fffff60000 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei ng nz na pe cy
NNSStrm+0x36be0:
fffff880`06643be0 488b040a mov rax,qword ptr [rdx+rcx] ds:fffff8a0`120b202c=????????????????
Resetting default scope

LAST_CONTROL_TRANSFER: from fffff80003149bf0 to fffff800030cbbc0

STACK_TEXT:
fffff880`009d7578 fffff800`03149bf0 : 00000000`00000050 fffff8a0`120b202c 00000000`00000000 fffff880`009d76e0 : nt!KeBugCheckEx
fffff880`009d7580 fffff800`030c9cee : 00000000`00000000 fffff8a0`120b202c 00000000`00000000 fffff8a0`0b2eca74 : nt! ?? ::FNODOBFM::`string'+0x4518f
fffff880`009d76e0 fffff880`06643be0 : fffff880`0662b20d 000007ff`fff60000 fffff8a0`0b2eca74 00800000`00102000 : nt!KiPageFault+0x16e
fffff880`009d7878 fffff880`0662b20d : 000007ff`fff60000 fffff8a0`0b2eca74 00800000`00102000 00000000`00000000 : NNSStrm+0x36be0
fffff880`009d7880 000007ff`fff60000 : fffff8a0`0b2eca74 00800000`00102000 00000000`00000000 fffff880`06649148 : NNSStrm+0x1e20d
fffff880`009d7888 fff... Read more

http://www.sevenforums.com/bsod-help-support/348930-random-bsods-random-intervals-have-files-sf-diagnostics.html
Relevancy 51.6%

For some reason my last post during numerous Random BCCodes. random BSODs tasks, here regarding this issue was deleted after days without warning or response Random BSODs during random tasks, numerous BCCodes. from anyone so here I am again now that I can view this section once more For the past week or so now my PC has been randomly BSODing at seemingly random times mostly when gaming Before the BSODs started happening I believe a day or so Windows removed some orphaned files from the drive before starting I don't know if this has anything to do with what's going on or not When gaming more often than not I'll suffer from crashes due to access violations the errors stating that the memory couldn't be read From this point either I get a BSOD very shortly after or immediately when doing something like checking the computer properties to see perhaps if Windows had suddenly decided one of my sticks of RAM was bad and displayed as quot XGB of RAM XGB usable quot At this point in this PC's life I'm chalking it up to probably failing hardware I recently had to disable Intel's SpeedStep on this processor as I was having issues where it wouldn't initialize like it should and clock my CPU up to load-levels thus leaving the system and anything I did with it a tad laggy Until that point it had been enabled since I built this PC and I had no problems with it whatsoever As far as temperatures and voltages are concerned all are well I monitor temps as closely as I can and I'm not overclocking Power from my PSU is all normal The only drivers I've messed with lately today are the video drivers which I updated to the latest version Nothing else involving drivers or other major software had been changed or messed with prior to the BSODs I've taken out the RAM and tested each stick individually in each slot and it booted to Windows just fine in every configuration I've ran both Memtest and the Windows memory diagnostic both have found nothing I've ran chkdsk f and it too found nothing So I'm pretty much at a loss as to what's going on here unless it's a failing CPU motherboard or some weird memory issue I can't isolate or replicate Also worth noting before I tested the RAM like I did I'd just taken it out and reseated it The PC ran just fine for about a day then started BSODing again Once I tested it all like that it again ran fine until a little while ago a span of about days this time This BSOD made no mention of any files I'd noticed win k sys in one of the prior BSODs and a different file before it but they seem random and had a BCCode of which all google searches pointed towards a filesystem hard drive problem but after that is when chkdsk found no errors problems At this point I'm leaning more towards potential hardware failure than anything This system is pushing years old this coming March and as much as it's been used it just wouldn't surprise me if it was hardware Anyway Attached is the SFDT zip file with all the necessary files included Thanks in advance and sorry for the massive post I'm trying to include as much information as possible PS If for some reason an admin moderator here feels the need to delete my thread for whatever reason my previous thread is still available in the Google cache the zip file I'd included had view before it was deleted without warning or word from anyone at least have the decency to send me a message as to why this time Thank you

A:Random BSODs during random tasks, numerous BCCodes.

Your .zip file doesn't contain any of the .dmp files required to analyse the BSOD/s.

Please follow this:
Dump Files - Configure Windows to Create on BSOD

Now follow this:
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.
Driver Verifier - Enable and Disable

Driver Verifier will cause your computer to run very sluggishly - this is normal. What it is trying to do is force your system to BSOD and isolate the offending driver/s. When it does, reboot, disable driver verifier, reboot as normal and upload the new dmp file/s here.

I recommend creating a system restore point before turning on driver verifier:
System Restore Point - Create

If your system fails to boot to desktop once driver verifier is enabled, turn it off by booting into Safe Mode:
Safe Mode

Once you get a new BSOD when running Driver Verifier, follow this:

1. Download the DM Log Collector application to your desktop by clicking the link below

DM Log Collector.exe

2. Run it by double-clicking the icon on your desktop, and follow the prompts.
3. Locate the .ZIP file that is created on your desktop, and upload it here in your next reply.

http://www.sevenforums.com/bsod-help-support/354337-random-bsods-during-random-tasks-numerous-bccodes.html
Relevancy 51.6%

Hi all first off thanks for reading this Basically my current build is about - years old the newest thing being my PSU which I replaced after several issues with the GPU drivers constantly crashing turns out it wasn't the power anyway For the past few weeks I've been having issues with it At one point the computer refused to start it would power up but the k b and mouse lights wouldn't turn on I seem to have solved it by moving my RAM slot looks to be buggered I kept random BSODs, messages. Random times, error on getting BSODs at random times and different messages I could be playing watching a movie or even letting it sit idle and it'd BSOD Temps for both the CPU and GPU are fine GPU hits about and CPU tops off at roughly C when stress testing I tried running Prime Furmark no crash funnily enough BSODs, Random times, random error messages. Done the RAM tests passes BSODs, Random times, random error messages. on both sticks no issues The error messages I've gotten are Bad Pool Header Memory Management System Service Exception The most frequent one is the Memory Management one I'm at my wit's end here I've updated my Mobo drivers GPU etc I'm hoping that someone might be able to make heads or tails of the problem and give me an idea of what to do

A:BSODs, Random times, random error messages.

Forgot to attach the dumps. Here are the most recent dumps.

The one labeled "Dumps" are just the minidumps I pulled directly from the folder.

The second one is the log created by that DM Log Collector program.

http://www.sevenforums.com/bsod-help-support/332576-bsods-random-times-random-error-messages.html
Relevancy 51.6%

Hi forums Here are my specs Toshiba P -S core i Is Windows Home Premium bit came installed with the laptop - no disk ie OEM I just bought it from Newegg com It's a refurbished - - Windows Random purchased laptop newly 7 refurbished BSOD machine and came with no documents or disks When this first started happening I did a repair install or whatever it is you can select after pressing F on boot Random BSOD - Windows 7 - newly purchased refurbished laptop Then I bought a -day license for DriverMax and updated the drivers And did a Windows Update etc I read somewhere today that Norton could cause it so I uninstalled it wasn't full version anyway But it's still happening I've attached a zip file containing the health report and the contents of Windows NT BSOD jcgriff Let me know if I messed it up and I will redo Thanks in advance if anyone can help I've got a couple of weeks left to the day warranty from Newegg If it's just a matter of fixing a few bugs then I'd rather do that then return it and maybe end up with something worse Newegg only has a replacement policy for the machine

A:Random BSOD - Windows 7 - newly purchased refurbished laptop

Intel display audio driver is old. Please update.


Code:
SYMBOL_STACK_INDEX: 7

SYMBOL_NAME: intelppm+107d

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: intelppm

IMAGE_NAME: intelppm.sys

DEBUG_FLR_IMAGE_TIMESTAMP: 4a5bc0fd

FAILURE_BUCKET_ID: X64_0x1E_0_intelppm+107d

BUCKET_ID: X64_0x1E_0_intelppm+107d

http://www.sevenforums.com/bsod-help-support/207831-random-bsod-windows-7-newly-purchased-refurbished-laptop.html
Relevancy 51.6%

Hi there greetings from scotland Ive been buiding my own systems now for about years just upgraded last week and build a whole new system it all installed no hastle drives detected windows xp pro and then sp installed full windows update and instaled revelant drivers but the system would just shutoff like the power was being turned off and its totally random Random built on PC newly Error(1003) Crashing [RESOLVED] i left it for days just incase it would sometimes just hang then be ok then sometimes just shut down like someone pulled out the power cable So i reinstalled windows again just to be sure after a full format Installed windows Then SP then Fully updated drivers amp programs Installed Norton IS did a Full system scan which was clean Left the computer running as normal but this time when it crashes i get the following error in the event log Error code parameter parameter e e d parameter e parameter For more information [RESOLVED] Random Crashing on newly built PC Error(1003) see Help and Support Center at http go microsoft com fwlink events asp follow the link i get [RESOLVED] Random Crashing on newly built PC Error(1003) this Details Product Windows Operating System Event ID Source System Error Version Symbolic Name ER KRNLCRASH LOG Message Error code parameter parameter parameter parameter Always the same thing amp totally random from mins appart to hours [RESOLVED] Random Crashing on newly built PC Error(1003) appart so i pulled out the USB stuff and used a memory testing dos util for hours to test the memory Zero errors Then ran a hardware Burn in program and it performed for mins on max settings not error Checked temps PC Wizard amp Front Thermal Sensor Pannel PC Wiz Current CPU Core V Aux V V Voltage V V Voltage V V Voltage V Processor Temperature Core C Processor Temperature Core C Mainboard Temperature C Power Aux Temperature C Hard Disk Temperature HDS VLSA C Hard Disk Temperature Maxtor L S C Front Thermal sensor Panel Processor Temperature C Idle C Gaming CPU Fan RPM Idle RPM Gaming Mainboard Temperature C Idle C Gaming In case Temperature C Idle C Gaming Hard Disk Temperature C Idle C Gaming Here is system Specks in a w supacool case Mainboard Gigabyte M SLI-S Chipset nVidia nForce SLI Processor AMD Athlon X MHz Physical Memory MB x DDR -SDRAM Video Card ATI Technologies Inc Radeon X Pro Hard Disk HDS VLSA GB Hard Disk Maxtor GB DVD-Rom Drive PIONEER DVD-RW DVR- D DVD-Rom Drive PIONEER DVD-RW DVR- Monitor Type Samsung SyncMaster - inchs Operating System Microsoft Windows XP Professional Service Pack DirectX Version c I also installed a Sound Blaster Live card bit old i know but i tested system with and without that and its still crashed died Here are the IRQ's Standard -Key or Microsoft Natural PS Keyboard Communications Port COM System CMOS real time clock Microsoft ACPI-Compliant System NVIDIA nForce Networking Controller C Logitech-compatible Mouse PS E Primary IDE Channel Radeon X Pro Texas Instruments OHCI Compliant IEEE Host Controller Creative SB Live series NVIDIA nForce Serial ATA Controller NVIDIA Network Bus Enumerator Standard OpenHCD USB Host Controller Standard Enhanced PCI to USB Host Controller NVIDIA nForce Serial ATA Controller NVIDIA nForce Serial ATA Controller if anyone wants any further info that i can provide please let me know tomorow i shall attempt to take out everything and re-seat the whole system Then test cables and such If im being a lemming and missing the obvious please let me know also to the error i dont have a lexmark printer that sometimes causes that problem i have an epson stylus and a brother laser USB things i have were the same as my old pc and still work fine Belklin Nostromo N game pad Logitech MX Cordless lazer mouse Logitech USB standalone microphone any imput would be greatly appreashated as im a wee bit lost here Cheers in advance and for looking at this long and boaring post

A:[RESOLVED] Random Crashing on newly built PC Error(1003)

Hi,

I would be very interested to know what brand name and power supply you are using with this rig. The X1950 pro video card sucks in a lot of amps and alone uses about 125 watts of your source power. List the brand name, the wattage, and the amps per rail for the +12 rail.

I am not implying it is the power supply in view of your nice troubleshooting and the obvious errors you are seeing, but just want to look at the total larger picture.

http://www.techsupportforum.com/forums/f10/resolved-random-crashing-on-newly-built-pc-error-1003-a-138922.html
Relevancy 51.17%

Hi to all of you Well Multiple BSODs "Newly" in PC Upgraded my I tried to upgrade my Core Duo PC because it was getting unused and also the Old Video Card it had expired so I researched of what compatible components I could adquire and I got a new grapics Card Geforce GT Gb and I Multiple BSODs in my "Newly" Upgraded PC added a new gb mhz RAM to my pc which has a DP DP motheboard with a Core Duo CPU I installed Windows Ultimate x to test the new Hardware at the start it was doing fine but lately it crashes randomly most of the time when I Use several applications Web Browser any game and Windows Explorer Let it idle for some time Play Dota or some other Steam game Most of the time I get IRQL NOT LESS OR EQUAL PFN LIST CORRUPT MEMORY MANAGEMENT I tried windows memcheck and it didn't get any errors also I tried Driver Verifier and I got drivers conflicting I thought uninstalling them will try to fix but not I attach all the info the collector has got from my PC If there is anything for me to do I would gladly do to help thank you for your help

http://www.sevenforums.com/bsod-help-support/381197-multiple-bsods-my-newly-upgraded-pc.html
Relevancy 50.74%

Hi,

I'm sufferring from random reboots on a newly built machine during use. memtest doesnt report any problems. I've used Windows Debuggng tools to 'read' the dump file but it doesnt mean anything to me. Hoping someone on here can read it for me and highlight the cause! Thanks
 

A:Random reboots on newly built machine - mini dump attached

Bugcheck 51, Registry Error, this problem is caused by a race condition on the input user-mode buffer for a registry function call.

There are couple of options to consider about correcting this error:

1. Download SP3 and install it, see whether that helps.
2. Do a repair install.

By the way did you rebooted your system without properly shutting down at any time?

Your second minidump points at Mcafee AV software file. I suggest you to uninstall it, use any of the alternative freeware options e.g. Avira or Avast or AVG and see whether that helps. Regards
 

http://www.techspot.com/community/topics/random-reboots-on-newly-built-machine-mini-dump-attached.149498/
Relevancy 50.74%

Hello

3 months ago I bought an XPS M1530 laptop. It's great, except that I get BSODs 2 times a week or more. I first thought it was a software error, but it is more likely a hardware error since it occurs on xp and vista with official drivers.

I get random BSODs (0x000000A, 0x0000008E, 0x000000D1, ...) reffering to different system files (sthda.sys, USBport.sys, video driver, ...) at random times. I have several dump files. Is it possible to upload them on this forum and have someone have a look at them?

Might this be a HDD error? I'm having my HDD replaced soon, since it makes strange noices. I checked my memory with memtest. Once it found an error, but since it was an old version I tried it with the latest version of Memtest; since then, no errors have been found.

I suspect it to be: 1) HDD, 2) Memory, 3) Mobo

Any help would be appreciated!

Gilles

A:Random BSODs referring to random .sys files

No one?
I'm speaking to Dell tomorrow to replace the HDD.

http://www.techsupportforum.com/forums/f10/random-bsods-referring-to-random-sys-files-261287.html
Relevancy 50.74%

I recently built a new desktop PC running a clean install of Windows Ultimate -bit retail version see my system specs All hardware was purchased new and all software installed were fresh installs All Windows Updates were applied successfully including SP I have also Random Firefox BSODs; crashes 4 random updated all drivers using manufacturer supplied drivers online as well as through Windows Update BIOS is flashed to latest manufacturer version and RAM timings were tightened to rated specs default - - - at V rated for - - - at V After using my system for a day or two I started getting frequent Firefox application crashes several times a day These manifested themselves by abruptly exiting out of Firefox and bringing up the Crash Report manager no freezing up or unresponsiveness of any sort was involved I am using Firefox with no third-party add-ons except for Random BSODs; Firefox 4 random crashes AdBlock Plus I also received several BSOD's three I believe one of which is MEMORY MANAGEMENT x A The BSOD's occurred randomly while browsing or doing other tasks and did not appear to be triggered by any given event My uTorrent application also crashed once not long after a Firefox crash but this was a one-time event I have run memtest for one pass on each of my sticks of ram individually and passes on the two sticks together with no errors This is my first time building a PC and I have previously only used Windows -bit Since all of the hardware is new I am wondering whether there could be a hardware issue or whether the root cause is software-related Any help suggestions would be appreciated

A:Random BSODs; Firefox 4 random crashes

  
Quote: Originally Posted by Klarerwind


I recently built a new desktop PC running a clean install of Windows 7 Ultimate 64-bit retail version (see my system specs). All hardware was purchased new, and all software installed were fresh installs. All Windows Updates were applied successfully, including SP1. I have also updated all drivers using manufacturer supplied drivers online as well as through Windows Update. BIOS is flashed to latest manufacturer version, and RAM timings were tightened to rated specs (default 9-9-9-24 at 1.5V, rated for 7-7-7-21 at 1.5V).

After using my system for a day or two, I started getting frequent Firefox application crashes (several times a day). These manifested themselves by abruptly exiting out of Firefox and bringing up the Crash Report manager; no freezing up or unresponsiveness of any sort was involved. I am using Firefox 4 with no third-party add-ons except for AdBlock Plus. I also received several BSOD's (three, I believe), one of which is MEMORY_MANAGEMENT (0x1A). The BSOD's occurred randomly while browsing or doing other tasks, and did not appear to be triggered by any given event. My uTorrent application also crashed once not long after a Firefox crash, but this was a one-time event.

I have run memtest86+ for one pass on each of my sticks of ram individually, and 5+ passes on the two sticks together, with no errors. This is my first time building a PC, and I have previously only used Windows 7 32-bit. Since all of the hardware is new, I am wondering whether there could be a hardware issue, or whether the root cause is software-related. Any help/suggestions would be appreciated.


Well both crashes were memory related and since the machine uptime was over 5 hours for both I suspect it is software related. Memtest tests outside of the windows environment and so is only testing the ram and mobo itself, not the way it is working in windows.

To be really accurate memtest should be run on each stick and in each slot for 5 or more passes ( takes a long time I know)

The fact you are running utorrent doesnt exactly instill confidence in me for it is by nature buggy, but I am still placing my bet on the ram

In order to find if there is a driver within windows causing you grief you should run driver verifier






Quote:
I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore f... Read more

http://www.sevenforums.com/bsod-help-support/157128-random-bsods-firefox-4-random-crashes.html
Relevancy 49.02%

I've been experiencing BSODs on this laptop ever since I got it. (It was my brother's) Each BSOD I get is usually different, either when browsing, playing games, etc. They're pretty much random. I would appreciate some help

A:Random BSODs on this Laptop (They are all random)

Code:
fffff880`064f4208 fffff880`0119df37Unable to load image \SystemRoot\system32\drivers\N360x64\0402000.00C\SYMDS64.SYS, Win32 error 0n2
*** WARNING: Unable to verify timestamp for SYMDS64.SYS
*** ERROR: Module load completed but symbols could not be loaded for SYMDS64.SYS
SYMDS64+0x64f37

Code:
fffff880`064f47c8 fffff880`03c49446Unable to load image \SystemRoot\system32\drivers\N360x64\0402000.00C\SRTSPX64.SYS, Win32 error 0n2
*** WARNING: Unable to verify timestamp for SRTSPX64.SYS
*** ERROR: Module load completed but symbols could not be loaded for SRTSPX64.SYS
SRTSPX64+0xe446
Uninstall Norton 360 and all Symentec products using Norton Removal tool.

Download and install Drivers for Atheros AR5B91 and Windows 7. Follow Driver Install - Device Manager to install it.

Update the display driver from https://downloadcenter.intel.com/ .... take the Intel? Driver Update Utility to do it.

Let us know the results. Further troubleshooting may be needed depending on the situation.

http://www.sevenforums.com/bsod-help-support/349391-random-bsods-laptop-they-all-random.html
Relevancy 49.02%

For the last few months I have been having strange stop errors First they only appeared a few minutes Random random BSODs times at after I started my Random BSODs at random times computer for Random BSODs at random times the first time that day with many different error codes After a couple of months of trying different solutions testing my RAM installing drivers flashing BIOS etc I figured it might be one of my hard drives acting up and I removed my oldest couple Since then my computer has been working fine but today I had two BSODs in a row with quot The video memory manager has encountered a fatal error quot and quot fltmgr sys quot Some other random error codes I've encountered Memory management Page fault in non Random BSODs at random times paged area Bad pool caller Driver irql not less than or equal Also most of the times my BSOD error dump stops at and claims to be completed but I don't receive a minidump file like when it reaches Sometimes it keeps retrying and stopping at Operating System Windows Ultimate -bit SP CPU AMD FX- C Zambezi nm Technology RAM GB Dual-Channel DDR MHz - - - Motherboard Gigabyte Technology Co Ltd A-UD CPU C Graphics BenQ G HD x Hz MB ATI AMD Radeon HD Series XFX Pine Group C Hard Drives GB M -CT M SSD ATA Device SSD GB Western Digital WDC WD FAEX- Z A ATA Device SATA C GB Western Digital WDC WD AADS- S B ATA Device SATA C Optical Drives DTSOFT Virtual CdRom Device TSSTcorp CDDVDW SH- BB ATA Device Audio AMD High Definition Audio Device I'm attaching my dump files from since a few months ago

Relevancy 49.02%

Hi I'm experiencing some difficulties with my hp at Random random BSODs appearing laptop Some of my system specs are System manufacturer Model Number Hewlett-Packard HP Pavilion dv Notebook PC Random BSODs appearing at random CPU core i CPU Q GHz cores Logical processors gb RAM Graphics card is an ATI Mobility Radeon HD My Sound Device is ATI High Definition Audio Device My Os is Windows Home Premium bit It was already installed when I bought it I bought this laptop last december The drive I use the most is Drive C Description Local Fixed Disk Size GB bytes Free Space GB bytes Volume Name OS Volume Serial Number CA D C My problem is that for the last two months or so a lot of BSODs have been appearing At first they only appeared when I was trying to shut down my computer The most frequent stop error causing the BSODs was STOP ERROR X it said something about some problem with the ntfs sys file and that I should run chkdsk I did indeed run chkdsk and it said that 'the volume is clean' which I interpret as my hard drive working just fine However that hasn't been the only stop error connected to the BSODs some of the other BSODs were concernin stop errors x E and X B At first BSODs would appear sometimes when trying to shut my computer down but now it's become totally random Sometimes I'm just listening to music and the computer makes this awful noise and the BSODs appear Sometimes I just leave it on and don't do anything and the BSODs appear The other day one appeared when trying to troubleshoot my audio device and sometimes they appear when i'm opening a folder or surfing the net I really don't know what to do I have tried uninstalling software such as firefox google chrome jdownloader winamp virtualclonedrive and my video codec pack I have switched from avg antivirus to avast antivirus just to check that the problem had nothing to do with my antivirus software I've checked for viruses and it seems that there are no infections There is something I haven't been able to uninstall which is Creative MediaSource I press Uninstall but nothing happens After uninstalling all of those things the BSODs keep appearing And today I got really scared because my computer refused to display the desktop after the welcome sign disappeared the screen went black and I couldn't do anything apart from restarting it using the ctrl alt del command I don't know if this is relevant but whenever I start watching youtube videos the computer's temperature rises considerably if I touch any piece of metal near the fan it kinda burns and also when I bought it I noticed that both music and videos would skip a lot which stopped after I disabled the ACPI Control Method Battrey device I've attatched the zip file with the necessary folders and files i ran the perfmon report once on May st and saved the report and did the same again on May rd that's why there are two html files I would really appreciate any help I can get Thanks in Advance Alejandro

A:Random BSODs appearing at random

Hi alejando and welcome to SF

Let's check the file system first: open an administrative command prompt (Start, typi in CMD, rightclick on the icon, run as Administrator.)
In that black window you type
chkdsk c: /f /x
If that doesn't find/fix anything, follow this tutorial to check your RAM

That temperature spike definitely needs attention. If you can get to the heatsink, blow it out with some canned air.

RAM - Test with Memtest86+


Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\David\Desktop\BSODs\alejandrog\052111-24382-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.17592.amd64fre.win7sp1_gdr.110408-1631
Machine Name:
Kernel base = 0xfffff800`02e54000 PsLoadedModuleList = 0xfffff800`03099650
Debug session time: Fri May 20 23:03:50.589 2011 (GMT-4)
System Uptime: 0 days 0:01:29.682
Loading Kernel Symbols
...............................................................
................................................................
........................................
Loading User Symbols
Loading unloaded module list
....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 24, {1904fb, fffff880023bc478, fffff880023bbcd0, fffff880016bdcf9}

Probably caused by : Ntfs.sys ( Ntfs!NtfsCheckExistingFile+f9 )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

NTFS_FILE_SYSTEM (24)
If you see NtfsExceptionFilter on the stack then the 2nd and 3rd
parameters are the exception record and context record. Do a .cxr
on the 3rd parameter and then kb to obtain a more informative stack
trace.
Arguments:
Arg1: 00000000001904fb
Arg2: fffff880023bc478
Arg3: fffff880023bbcd0
Arg4: fffff880016bdcf9

Debugging Details:
------------------
EXCEPTION_RECORD: fffff880023bc478 -- (.exr 0xfffff880023bc478)
ExceptionAddress: fffff880016bdcf9 (Ntfs!NtfsCheckExistingFile+0x00000000000000f9)
ExceptionCode: c0000005 (Access violation)
ExceptionFlags: 00000000
NumberParameters: 2
Parameter[0]: 0000000000000000
Parameter[1]: ffffffffffffffff
Attempt to read from address ffffffffffffffff

CONTEXT: fffff880023bbcd0 -- (.cxr 0xfffff880023bbcd0)
rax=fffff8a0035e7040 rbx=bffff8a0035e6fe0 rcx=0000000000000080
rdx=fffffa800967cb60 rsi=0000000000000000 rdi=fffff8a0035e7010
rip=fffff880016bdcf9 rsp=fffff880023bc6b0 rbp=0000000000000000
r8=0000000000000000 r9=0000000000000000 r10=fffff8a002968060
r11=fffffa800967cb60 r12=fffffa8008967e40 r13=fffffa800aaa4010
r14=fffff88003788460 r15=fffffa80082d7f70
iopl=0 nv up ei ng nz na pe cy
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010283
Ntfs!NtfsCheckExistingFile+0xf9:
fffff880`016bdcf9 8b8bac000000 mov ecx,dword ptr [rbx+0ACh] ds:002b:bffff8a0`035e708c=????????
Resetting default scope

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

PROCESS... Read more

http://www.sevenforums.com/bsod-help-support/164806-random-bsods-appearing-random.html
Relevancy 49.02%

Hello, so, can't tell when this all started happening, but every one or two weeks, either in a game or just sitting idle, I get the 3B STOP error code. So after 3 months of this, I'm finally asking for help here. I know, I took my sweet time doing it. I will attach the requested zip file as per the BSoD rules and guidelines sticky.

Also, this is what my Windows recovery window after a bootup after said Blue Screen.

Problem signature:



Problem Event Name: BlueScreen

OS Version: 6.1.7601.2.1.0.768.3

Locale ID: 1033

Additional information about the problem:



BCCode: 3b

BCP1: 00000000C0000005

BCP2: FFFFF88001D28C1D

BCP3: FFFFF88009CB6850

BCP4: 0000000000000000

OS Version: 6_1_7601

Service Pack: 1_0

Product: 768_1

But I'm sure the zip has what you all need.

Thanks in advance,

Anthony.

http://www.sevenforums.com/bsod-help-support/390025-random-3b-bsods-random-intervals.html
Relevancy 49.02%

Hello everyone and thank you for taking the time to read a newbie's post Anyways I'm having a really frustrating problem Symptoms - Random BSODs happening at random time intervals from bootup Example Bootup and after minutes BSOD Bootup again and after minutes BSOD - BSODS are variety of errors not just one Side Note - Been running exact same build of windows x from august till November At around the rd I BSODS - Times Random at Please Help Random did a clean install using the exact same disc drivers etc Problems started after my clean install Actions Taken - Ran Windows Memory Diagnostic on all memory with no errors - Ran Windows Memory Random BSODS at Random Times - Please Help Diagnostic on each memory DIMM individually and no errors - Ran SeaGate Seatools and my hard drive passed - Reinstalled Windows XP Vista and version of my wireless usb adapter and problem continued - Removed NVIDIA drivers for my GT and using the default ones problem still remained - Problem still continues in Safe Mode and Safe Mode with Networking - Did another clean install of windows using again the same disc and drivers etc as from the time it worked still nothing - on another post i read to run VERIFIER FLAG ALL or something similar in command prompt The last two minudumps are after I ran that and rebooted -------- The minidumps since the last clean install are included Any ideas Thanks Roik

A:Random BSODS at Random Times - Please Help

Hello and welcome to SF








  
Quote: Originally Posted by pcnm0430


The minidumps since the last clean install are included.


Where?

http://www.sevenforums.com/bsod-help-support/36728-random-bsods-random-times-please-help.html
Relevancy 48.59%

Hi guys i pc assembled am about to buy my new computer and i would have some advices from you if possible My budjet is about - euro this are the pieces i thought - CASE Aerocool Syclone - MOTHERBOARD ASUS - Motherboard P Z assembled pc -I DELUXE socket LGA chipset Intel Z Mini-ITX - CPU Intel - Processor Core i - Sandy Bridge Quad-Core Ghz GPU integrated HD socket LGA Boxed - VIDEO EVGA - GeForce GT GB GDDR Pci-E x DVI-I Dual Link DVI-D Single Link Mini-HDMI single slot - Power Unit CORSAIR - Watt Gaming Series Bronze ATX PS - RAM I think here i need some help because i don t know how many slots for the ram the motherboard has and what is the best configuration anyway i thought this KINGSTON - Memory Dimm XMP T Gb x Gb ddr Mhz CL I would like to know if those pieces could go togheter to work as well as they can if they are compatible and so I will use this pc especially to work with photoshop Thanks nbsp

Relevancy 48.59%

i recently bought an asus p8h67-v board and intel i3 2120 cpu. 450w power supply. i connected everythng. when i press the power button it doesnt start. but when i pull gently on the pwrest and hdd led cables the fan of the cpu starts, when i let go it goes off. pls help.

A:new assembled pc pls help

  
Quote: Originally Posted by ciah


i recently bought an asus p8h67-v board and intel i3 2120 cpu. 450w power supply. i connected everythng. when i press the power button it doesnt start. but when i pull gently on the pwrest and hdd led cables the fan of the cpu starts, when i let go it goes off. pls help.


It sounds like there is a faulty connection either inside the power supply or at the termination point of the led cables. I would try a different unit and see if that solves the problem. A 450 Watt unit is on the lower side of the wattage scale, I generally go with 600+.

http://www.sevenforums.com/general-discussion/227154-new-assembled-pc-pls-help.html
Relevancy 48.16%

Hello,
Anyone know of where I can get unassembled PC kits? Or if in fact such an animal exisits? Or possibly some flavor of what I am looking for?
I'm looking for something which has all components and software that has to be assembled, or variations of this.
My son likes working on things, so I'm looking into something like this as a gift.
Any ideas or similar pointers would be appreciated.
Thank you for your time,
patmac
 

Relevancy 47.73%

Hey guys I just built my first pc and whenever I switch it on everything is working and all the fans are spinning and stuff so I think everything is plugged in properly but when I plug it into my monitor with a hdmi cable there is "no signal".

A:Can't access bios on.newly newly built pc

I also tried spamming f10 or delete and other buttons on my keyboard when it switches on to access bios but I have a mechanical keyboard and nothing seems to happen

http://www.pcadvisor.co.uk/forum/helproom-1/cant-access-bios-newly-newly-built-pc-4609433/
Relevancy 47.3%

Hi Been getting random BSOD crashes and freezes on my PC Heres the config OS Windows x CPU core i MoBo MSI P -GD RAM (Windows 7) PC BSOD assembled on Corsair GB DDR MHz GPU xATI HD in crossfire HDD WD GB blue edition Wireless card Linksys PCI wireless G adapter WRT G I think PSU Corsair HX watts Age roughly months Re-installed the OS about months back Two things to note here Linksys did not release the windows drivers for this wireless BSOD on assembled PC (Windows 7) card I am using the chipset manufacturer's Ralink corp drivers My PSU BSOD on assembled PC (Windows 7) got burnt out in a power surge when my granddad tried to use it I tried switching it on once after that and my PC came on kinda like a flickering bulb so I shut it off but I might have damaged something because the BSODs started after this incident As for the BSODs I get them whenever I'm surfing the net using any browser while listening to music the sound driver crashes followed by a BSOD soon after While playing any directx based game online offline as well sometimes Also getting random freezes and restarts These apps open at the same time give me a guaranteed BSOD Warcraft Any internet browser WinAmp Garena EDIT Sorry for the RAR file didnt notice till I saw it attached heres the dump file stuffs

A:BSOD on assembled PC (Windows 7)

Hello and welcome to TSF.

Bugchecks vary greatly, including some 0x24 which is normally hard drive related. memory_corruption is also flagged multiple times as the cause.

Start by testing the hard drive. Open an elevated command prompt (Start>type cmd>right-click>Run as administrator) and run the command chkdsk /r /f. It takes 2-3 hours to complete so it may be a good idea to run it overnight. Let us know how it works out for you. I'll start digging a bit deeper if necessary.

Devin

http://www.techsupportforum.com/forums/f299/bsod-on-assembled-pc-windows-7-a-505506.html
Relevancy 47.3%

these are the specifications x SanDisk Extreme SDSSDX- G-G quot GB SATA III Internal Solid State Drive SSD MAIN DRIVE THAT HOUSES OPERATING SYSTEM x I may my BSOD 2012 PC in of since ever assembled CORSAIR XMS GB x GB -Pin DDR SDRAM DDR PC Desktop Memory Model CMX GX M A C x Intel Core i - Ivy Bridge GHz GHz Turbo LGA W Quad-Core Desktop Processor Intel HD Graphics x ASUS SABERTOOTH Z LGA Intel Z HDMI SATA Gb s USB ATX Intel Motherboard x Seagate Barracuda ST AS-RK GB RPM SATA Gb s quot Internal Hard Drive DATA DRIVE BSOD ever since I assembled my PC in may of 2012 ONLY x COOLER MASTER HAF Advanced RC- -KKN -GP Steel ATX Full Tower Computer Case with USB Black Interior and x ASUS ENGTX TI DC TOP DI GD GeForce GTX Ti Fermi GB -bit GDDR PCI Express x HDCP Ready SLI x CORSAIR BSOD ever since I assembled my PC in may of 2012 Enthusiast Series TX V W ATX V v EPS V BSOD ever since I assembled my PC in may of 2012 v PLUS BRONZE Certified Active PFC High x Microsoft Windows Professional SP -bit - OEM Since I purchased and installed these components together in May of I have had more BSOD since them that I had with my last PC which I had for years episode I checked the Memory using a MemTest updated all my drivers the only BSOD that I can contain is when I hit quot start quot button to close the PC down If I use Glary Utilities to remove corrupted registry entries that particular BSOD goes away Recently the Windows explorer crashes for no reason or when I attempt to delete a folder it crashes until I highlight the folder than use the quot delete quot button I have virtually all the BSOD captured in BlueScreenView however most of the crashes are different I do have Norton Internet Security here are some files from the BlueScreenView - - dmp PM MEMORY MANAGEMENT x a fffffa a b ffff ntoskrnl exe ntoskrnl exe f c NT Kernel amp System Microsoft Windows Operating System Microsoft Corporation win sp gdr - x ntoskrnl exe f c - - dmp AM PFN LIST CORRUPT x e fb ea Ntfs sys Ntfs sys cd x ntoskrnl exe f c - - dmp AM SYSTEM THREAD EXCEPTION NOT HANDLED x e ffffffff c fffff c c fffff c c EX SYS EX SYS a e x - - dmp AM BAD POOL HEADER x fffff a bfc fffff a bfc ad c Ntfs sys Ntfs sys b b x ntoskrnl exe f c - - dmp PM NTFS FILE SYSTEM x fb fffff fab fffff fa a fffff d b Ntfs sys Ntfs sys a x ntoskrnl exe f c - - dmp AM SYSTEM SERVICE EXCEPTION x b c ffee fffff acf b ntoskrnl exe ntoskrnl exe f c NT Kernel amp System Microsoft Windows Operating System Microsoft Corporation win sp gdr - x ntoskrnl exe f c - - dmp AM BUGCODE USB DRIVER x fe fffffa e b USBPORT SYS USBPORT SYS d d x ntoskrnl exe f c - - dmp PM DRIVER IRQL NOT LESS OR EQUAL x d fc fffff f f USBPORT SYS USBPORT SYS f x ntoskrnl exe f c - - dmp AM SYSTEM THREAD EXCEPTION NOT HANDLED x e ffffffff c fffff faa fffff cd fffff ccda EX SYS EX SYS f x EX SYS faa - - dmp PM NO MORE IRP STACK LOCATIONS x fffffa e rfcomm sys rfcomm sys x ntoskrnl exe f c as you can see there are all different but most of the bug string are from MEMORY MANAGEMENT Any clue would be appreciated It just crashed again when attempting to locate the BSOD file

A:BSOD ever since I assembled my PC in may of 2012

how many passes did you do the memtest for each RAM ??

You would need to do at least for 6-8 passes in order to confirm its not the RAM.... most of the BSOD are severe memory management errors....

http://www.sevenforums.com/bsod-help-support/249033-bsod-ever-since-i-assembled-my-pc-may-2012-a.html
Relevancy 47.3%

I ordered one from tigerdirect.com and I am looking foward to putting it together...



Nick
 

A:Do Barebone Kits come Assembled?

a contradictory question if ever I heared one!

I would assume that anything in a barebonekit would be pre-assembled, purely for conveniece, if not for ease of delivery.

Still, if they aren't assembled, it wouldn't be a lot to assemble yourself anyway
 

http://www.techspot.com/community/topics/do-barebone-kits-come-assembled.27191/