Windows Support Forum

Ntfs.sys and random BSOD at every startup on computer

Q: Ntfs.sys and random BSOD at every startup on computer

Hi, Good day to you!

I am getting the BSOD everytime I turn on my computer with Ntfs.sys and I've uploaded the dmp files from C:\windows\minidump folder to the below link. Can you please assist me in solving the issue?
Please let me know if you need anymore details from my side.
Thanks in advance for your assistance.

Relevancy 100%
Preferred Solution: Ntfs.sys and random BSOD at every startup on computer

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Ntfs.sys and random BSOD at every startup on computer

Please continue here

http://www.sevenforums.com/bsod-help-support/306755-ntfs-sys-random-bsod-every-startup-computer.html
Relevancy 83.42%

I just built a new desktop but I keep getting random BSOD. All drivers installed are up to date. While starting up sometimes a BSOD appears before the windows logo. Most of the time it will start up fine and then couple minutes later BSOD. Im usually just browsing the internet while this happens. I have tried removing one RAM and running each at a time, same results. I also tried removing the gfx card and using the onboard graphics but the same BSOD. Someone please take a look at my DMP files and tell me whats going on. Thank you in advance.

Some Specs.
MSI b85-g41 pc mate
i5 4570
samsung 830 ssd 128gb
Patriot viper extreme 8gb 4x2
Radeon HD 7770

A:Random BSOD on startup. pagefault, ntfs.sys

Caused by:Driver Reference Table - atikmdag.sys = Fri Mar 29 05:27:04 2013

Code:
fffff880`06e79c58 fffff880`04899dd3 atikmdag+0x8bdd3
fffff880`06e79c28 fffff880`0489adae atikmdag+0x8cdae
fffff880`06e79bf8 fffff880`0489b8ee atikmdag+0x8d8ee
fffff880`06e79b78 fffff880`05150ce0 atikmdag+0x942ce0
fffff880`06e79b50 fffff880`049c4370 atikmdag+0x1b6370
fffff880`06e79b30 fffff880`049bc4f8 atikmdag+0x1ae4f8
fffff880`06e79ad8 fffff880`04860d2f atikmdag+0x52d2f
fffff880`06e79ac8 fffff880`05152bf8 atikmdag+0x944bf8
fffff880`06e79a38 fffff880`04860d2f atikmdag+0x52d2f

Code:
Driver Model: WDDM 1.1
Driver Attributes: Final Retail
Driver Date/Size: 3/28/2013 19:37:02, 1155264 bytes
If you're overclocking the card-STOP.
Remove the driver installation and Catalyst Control Center in particular.
Download the latest WHQL release, while the installation process
when given the option !uncheck! the option to install Catalyst Control Center and continue
on installing the display driver only. AMD Catalyst - Latest : 5/29/2013

http://www.sevenforums.com/bsod-help-support/299518-random-bsod-startup-pagefault-ntfs-sys.html
Relevancy 65.79%

Hello,

Lately there are weird things going on with my computer.

Firstly, on the 07/01/2014 I had a BSOD. Details below :
71d3160702ca3f91376bc753df0c5547.png (unfortunately my MiniDump folder is empty, so this is all I can provide)

And ever since then every time I come home, and turn my computer on, I log in and after approximately 5-10 minutes, the computer shuts it self down, or freezes and I have to boot it.

Usually, my computer shuts down when I start playing a game, and freezes when I just sit on the desktop, writing on skype etc.

I have completed a SFdebugFiles and I am attaching below (It doesnt let me upload msinfo32 file)

A:BSOD, Then random computer crashes when playing, freezes on startup.

Also, would reinstalling windows system be a solution ? I was thinking about doing it anyways

http://www.sevenforums.com/bsod-help-support/318408-bsod-then-random-computer-crashes-when-playing-freezes-startup.html
Relevancy 65.79%

I'm having some issues with my computer Basic Computer Startup, During BSOD and Random Idle, Tasks crashing multiple times throughout the day Ever since I attempted to install iTunes last night March my computer has been crashing with multiple different error messages like x b x x e x b is definitely the one that shows up the most though I have tried multiple different attempts in fixing this including updating all my drivers running disk cleanups and defrags registry cleanups and security scans and nothing seems to be helping Now my ATI Catalyst for my graphics card isnt starting correctly on startup My computers specs are Windows Home Premium x Service Pack build Gigabyte Technology Co Ltd GA- T-USB gigahertz AMD Phenom II X T Hitachi HDS CLA Hard drive GB ATI Radeon HD Series Random BSOD During Computer Idle, Startup, and Basic Tasks Display adapter You guys are my last hope before I wipe my hard drive and start over with my windows disk and I really don't want to sit around for days reinstalling and downloading games with how huge they are now P

A:Random BSOD During Computer Idle, Startup, and Basic Tasks

As of now there haven't been a crash for an hour or so. Still watching for any new BSOD error codes that may pop up.

Edit: NVM my computer just crashed after attempting to open a game. Error code was 0x0000003b again.

http://www.sevenforums.com/bsod-help-support/218092-random-bsod-during-computer-idle-startup-basic-tasks.html
Relevancy 65.36%

it gives BSOD without description like xxx_xxxx_xxxx_xxx also it gives BSOD while playing games at a random frequency.

? OS - Windows 7
? x86 (32-bit)
? I bought the computer parts one by one from websites and installed on my own a windows 7
? Age of system CPU GPU RAM Power Supply are 2.5 months old. hard disk is 3-4 years old.
? Age of OS installation - 5 months old. i have reinstalled it like 7 times.
? CPU - AMD Phenom II 545 X2 3.0 Ghz
? Video Card - ATI Radeon HD 5750 Powercolor 1GB GDDR5
? MotherBoard - MA785GMTUD2H
? 2 GB Kingston 1333mhz ram
? Power Supply - 420 real Watt
also i have a G15 Keyboard. ( I love it :P )

I added TSF_Vista my Minidumps and Resource perfomance monitor reports.
Please Please Please Please help me

A:ntfs.sys random BSOD

I also done the things on DRIVER VERIFIER - Windows 7 & Vista and it gave a BSOD with a name RTKHDVA or RTKHAUD I couldnt see the extension because it happens too fast but here is the dump

http://www.techsupportforum.com/forums/f299/ntfs-sys-random-bsod-476865.html
Relevancy 65.36%

I had a hard drive failure and had to install a new hard drive While I was at it i decided to clean install windows The computer seemed to run slow I decided that I didn't have time to mess with it and took it to a local company to have it worked it I got it back and it seemed fine I updated my vidoe card driver installed Lightroom and a couple other programs I use for work Now at random I get Windows Explorer crashes BSOD or lock ups It is a new hard drive and I have ran multiple checks on it The BSOD that I keep seeing is NTFS sys but I know drivers can cause this I never had BSOD on my old configuration This only has started since the new hard drive as been installed I have attached all the log files that was asked for in the sticky post Any help will be greatly appreciated Windows x SP Amd Phenon II x GHZ GB BSOD NTFS.SYS random at RAM Nvidia GForce GT Watt power Supply Custom Build PC No issues NTFS.SYS BSOD at random before HD Failure amp Reinstall of Windows

A:NTFS.SYS BSOD at random

This looks driver related, you have a lot of crapware on your PC.


Code:
BugCheck D1, {fffff8800133d63c, 2, 8, fffff8800133d63c}

DRIVER_IRQL_NOT_LESS_OR_EQUAL

So a driver attempted to access invalid or paged memory at an IRQL too high, the IRQL was at 2 which is too high to access pageable memory as it must be at 1 or 0.

I noticed how the address being referenced was by the address calling the instruction, not just reference it but attempt to execute itself.

Ok so accessing pageable memory at IRQL 2 generates a page fault which is an illegal operation hence the BSOD.
That page fault was an exception, more specifically an access violation where the CPU could not address the memory being referenced as it was paged out.


Code:
EXCEPTION_RECORD: fffff8800dd14318 -- (.exr 0xfffff8800dd14318)
ExceptionAddress: fffff80002cde0be (nt!CcGetVacbFromFreeList+0x000000000000007e)
ExceptionCode: c0000005 (Access violation)
ExceptionFlags: 00000000
NumberParameters: 2
Parameter[0]: 0000000000000000
Parameter[1]: ffffffffffffffff
Attempt to read from address ffffffffffffffff

Code:
FAILURE_BUCKET_ID: X64_0xD1_CODE_AV_PAGED_IP_Ntfs!_??_::NNGAKEGL::_string_+2ee0
It indicates the instruction pointer used attempted to read from invalid memory in a paged area...
Let's look at the callstack.


Code:
3: kd> k
Child-SP RetAddr Call Site
fffff880`0dd130d8 fffff800`02cc6169 nt!KeBugCheckEx
fffff880`0dd130e0 fffff800`02cc4de0 nt!KiBugCheckDispatch+0x69
fffff880`0dd13220 fffff880`0133d63c nt!KiPageFault+0x260
fffff880`0dd133b8 fffff800`02cf1cdc Ntfs! ?? ::NNGAKEGL::`string'+0x2ee0
fffff880`0dd133c0 fffff800`02cf175d nt!_C_specific_handler+0x8c
fffff880`0dd13430 fffff800`02cf0535 nt!RtlpExecuteHandlerForException+0xd
fffff880`0dd13460 fffff800`02d014c1 nt!RtlDispatchException+0x415
fffff880`0dd13b40 fffff800`02cc6242 nt!KiDispatchException+0x135
fffff880`0dd141e0 fffff800`02cc4b4a nt!KiExceptionDispatch+0xc2
fffff880`0dd143c0 fffff800`02cde0be nt!KiGeneralProtectionFault+0x10a
fffff880`0dd14550 fffff800`02cdcf88 nt!CcGetVacbFromFreeList+0x7e
fffff880`0dd14590 fffff800`02cdbf8f nt!CcGetVacbMiss+0xd8
fffff880`0dd14650 fffff800`02fb0fb2 nt!CcGetVirtualAddress+0x2e0
fffff880`0dd146e0 fffff880`012e501f nt!CcCopyRead+0x132
fffff880`0dd147a0 fffff880`010d9098 Ntfs!NtfsCopyReadA+0x18f
fffff880`0dd14980 fffff880`010dc8ba fltmgr!FltpPerformFastIoCall+0x88
fffff880`0dd149e0 fffff880`010fa630 fltmgr!FltpPassThroughFastIo+0xda
fffff880`0dd14a20 fffff800`02fb0b39 fltmgr!FltpFastIoRead+0x1d0
fffff880`0dd14ac0 fffff800`02cc5e53 nt!NtReadFile+0x417
fffff880`0dd14bb0 00000000`7791131a nt!KiSystemServiceCopyEnd+0x13
00000000`011be6d8 00000000`00000000 0x7791131a
I see some undocumented functions which I'm not too sure about but I also see filter manager I/O calls.

I would say Avast or Daemon Tools is causing the issues, probably Avast.
Uninstall these programs.


Code:
Start Menu\Programs\ ASRock Utility Public:Start Menu\Programs\ASRock Utility Public
Start Menu\Programs\ASRock Utility\ AsrAppCharger Public:Start Menu\Programs\ASRock Utility\AsrAppCharger Public
Start Menu\Programs\ASRock Utility\ ASRock eXtreme Tuner Public:Start Menu\Programs\ASRock Utility\ASRock eXtreme Tuner Public
Start Menu\Programs\ASRock Utility\ InstantBoot Public:Start Menu\Programs\ASRock Utility\InstantBoot Public
Start Menu\Programs\ Avast Public:Start Menu\Programs\Avast Public
Start Menu\Programs\ DAEMON Tools Lite Public:Start Menu\Programs\DAEMON Tools Lite Public
Start Menu\Programs\ DAEMON Tools Pro Advanced CADMAN-PC\CADMAN:Start Menu\Programs\DAEMON Tools Pro Advanced CADMAN-PC\CADMAN
Replace Avast with Microsoft Security Essentials for testing purposes.

http://http://windows.microsoft.com/...tials-download

http://www.techsupportforum.com/forums/f299/ntfs-sys-bsod-at-random-867626.html
Relevancy 64.5%

i just upgraded my RAM to 6GB (2 and 4GB) and get a random BSOD, so i put out the 2GB and now i'm using only 4GB of RAM in my laptop, but it keeps getting into BSOD, i ran everything, defrag, cleaner, virus scan, etc. none of the helps, please help mee

Please kind reviewer and technicians I beg of your help, I am so frustrated.
My spec :
ACER ASPIRE 4741G
Intel Core i3-370M @2.40 GHz
4GB RAM PC 10600 (667Mhz)
320GB HDD
NVIDIA GeForce GT 320M up to 1754 MB Turbo Cache
Windows 7 Home Premium 64bit (OEM) original

A:Random BSOD's - Mem Management, ntfs.sys, etc

  
Quote: Originally Posted by fadlifari


i just upgraded my RAM to 6GB (2 and 4GB) and get a random BSOD, so i put out the 2GB and now i'm using only 4GB of RAM in my laptop, but it keeps getting into BSOD, i ran everything, defrag, cleaner, virus scan, etc. none of the helps, please help mee

Please kind reviewer and technicians I beg of your help, I am so frustrated.
My spec :
ACER ASPIRE 4741G
Intel Core i3-370M @2.40 GHz
4GB RAM PC 10600 (667Mhz)
320GB HDD
NVIDIA GeForce GT 320M up to 1754 MB Turbo Cache
Windows 7 Home Premium 64bit (OEM) original


Various memory corruption issues.

These were caused by a memory exception. Please run these two tests to verify your memory and find which driver is causing the problem.
1-Memtest.

*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

RAM - Test with Memtest86+

2-Driver verifier






Quote:
I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.


Driver Verifier - Enable and Disable

http://www.sevenforums.com/bsod-help-support/194868-random-bsods-mem-management-ntfs-sys-etc.html
Relevancy 64.5%

I just built my computer about a week ago and was running fine for about two days. The second day I started getting BSOD errors just as the system booted, or when I tried to run a program. I have ran a memory test, and checked the disk. All my drivers are up to date, and I am out of options. I can run fine in safe mode, which leads me to believe it is a driver that isn't working and not the hard disk or the memory. I have tried to read the dump files to the best of my ability, and the only errors that come up are Ntfs.sys, Win32k.sys,and Ntoskrnl.exe. If anyone is willing to look at the .dmp files and help me out I would much appreciate it.

A:BSOD on startup Ntfs.sys,Win32k.sys

  
Quote: Originally Posted by 1800s


I just built my computer about a week ago and was running fine for about two days. The second day I started getting BSOD errors just as the system booted, or when I tried to run a program. I have ran a memory test, and checked the disk. All my drivers are up to date, and I am out of options. I can run fine in safe mode, which leads me to believe it is a driver that isn't working and not the hard disk or the memory. I have tried to read the dump files to the best of my ability, and the only errors that come up are Ntfs.sys, Win32k.sys,and Ntoskrnl.exe. If anyone is willing to look at the .dmp files and help me out I would much appreciate it.


Hi and welcome

Your crashes are all over the map. some caused by ntfs file system most by memory.

they are ugly. we need to start somewhere
I would suggest that somewhere be
dl and run memtestx86 for hours.(at least 5 in depth runs)
run a system file check\
type cmd insearch>right click and run as admin>sfc /scannow.

let us know the results
there are more agressive tools we can use but you will need to back up and have a win 7 dvd at hand just in case.
{code]
011910-23400-01.dmp 1/19/2010 12:35:48 PM BAD_POOL_HEADER 0x00000019 00000000`00000003 fffffa80`0395b8e0 7ffffa80`0395b8e0 fffffa80`0395b8e0 win32k.sys win32k.sys+198433 x64 C:\Users\K\Desktop\Minidump\011910-23400-01.dmp 4 15 7600
011210-20108-01.dmp 1/12/2010 1:05:10 PM BAD_POOL_HEADER 0x00000019 00000000`00000003 fffffa80`03959e00 7ffffa80`03959e00 fffffa80`03959e00 ntoskrnl.exe ntoskrnl.exe+71f00 x64 C:\Users\K\Desktop\Minidump\011210-20108-01.dmp 4 15 7600
011510-21949-01.dmp 1/15/2010 10:10:10 AM BAD_POOL_HEADER 0x00000019 00000000`00000003 fffffa80`0395a420 7ffffa80`0395a420 fffffa80`0395a420 ntoskrnl.exe ntoskrnl.exe+71f00 x64 C:\Users\K\Desktop\Minidump\011510-21949-01.dmp 4 15 7600
011910-20654-01.dmp 1/19/2010 11:35:54 AM BAD_POOL_HEADER 0x00000019 00000000`00000003 fffffa80`0395b380 7ffffa80`0395b380 fffffa80`0395b380 ntoskrnl.exe ntoskrnl.exe+71f00 x64 C:\Users\K\Desktop\Minidump\011910-20654-01.dmp 4 15 7600
011210-23571-01.dmp 1/12/2010 1:07:00 PM BAD_POOL_HEADER 0x00000019 00000000`00000003 fffffa80`03959430 7ffffa80`03959430 fffffa80`03959430 luafv.sys luafv.sys+11c0f x64 C:\Users\K\Desktop\Minidump\011210-23571-01.dmp 4 15 7600
011510-21434-01.dmp 1/15/2010 10:12:12 AM DRIVER_OVERRAN_STACK_BUFFER 0x000000f7 fffff880`086ae7c0 00001b43`7db1966e ffffe4bc`824e6991 00000000`00000000 ntoskrnl.exe ntoskrnl.exe+71f00 x64 C:\Users\K\Desktop\Minidump\011510-21434-01.dmp 4 15 7600
011510-23103-01.dmp 1/15/2010 11:57:52 PM KMODE_EXCEPTION_NOT_HANDLED 0x0000001e ffffffff`c0000005 fffff800`02bfb0cd 00000000`00000000 ffffffff`ffffffff ntoskrnl.exe ntoskrnl.exe+71f00 x64 C:\Users\K\Desktop\Minidump\011510-23103-01.dmp 4 15 7600
012010-18501-01.dmp 1/20/2010 10:10:36 AM KMODE_EXCEPTION_NOT_HANDLED 0x0000001e ffffffff`c0000005 fffff800`02acb91b 00000000`00000000 ffffffff`ffffffff ntoskrnl.exe ntoskrnl.exe+71f00 x64 C:\Users\K\Desktop\Minidump\012010-18501-01.dmp 4 15 7600
011810-18267-01.dmp 1/18/2010 12:35:10 PM MEMORY_MANAGEMENT 0x0000001a 00000000`00041284 fffff6fb`40001001 00000000`0000000c fffff700`01080000 ntoskrnl.exe ntoskrnl.exe+71f00 x64 C:\Users\K\Desktop\Minidump\011810-18267-01.dmp 4 15 7600
011210-20857-01.dmp 1/12/2010 1:00:50 PM NTFS_FILE_SYST... Read more

http://www.sevenforums.com/bsod-help-support/57123-bsod-startup-ntfs-sys-win32k-sys.html
Relevancy 64.5%

I've been asking this question for a while now and I can't seem to get it resolved. Sometime when I boot up my PC It will either BSOD asfter loading to Deskop, giving me either a SYSTEM_SERVICE_EXCEPTION or a NTFS.sys error (and sometime it will give me an error 0x0000 I cant remeber the exact code).

I've ran memtest 86 for 12 hours (pass 7) and have recieved no errors.

When I try to user driver verifier, it doesn't immediately BSOD to tell me what corrupt drivers I have. Any help on this?

A:BSOD on Startup of PC SYSTEM_SERVICE_EXCEPTION and NTFS.sys

  
Quote: Originally Posted by cav



I've ran memtest 86 for 12 hours (pass 7) and have recieved no errors.


As you have multiple bugcheck codes, memory is the primary suspect. And memtest86 is a crap tool, havind a deceptively similar name with memtest86+, the real memory testing tool.

Test your RAM modules for possible errors. How to Test and Diagnose RAM Issues with Memtest86+
Run memtest86+ for at least 8 consecutive passes.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

http://www.sevenforums.com/bsod-help-support/351281-bsod-startup-pc-system_service_exception-ntfs-sys.html
Relevancy 64.5%

I've been having 0x00000024 Ntfs.sys BSODs and Bad Pool BSODs at system startup recently. Please help me identify the cause. See DM Log Collector files attached. My system specs are below. Thanks in advance!

A:BSOD 0x00000024 Ntfs.sys at startup

Hello,


Code:
Processor may be overclocked!
Expected Frequency: 2930
Actual Frequency: 3519
Overclock Ratio: 1.20102
I highly suggest that you undo your overclock as it could be starting to cause your hardware to fail.


Code:
ASACPI.sys Mon Mar 28 11:30:36 2005 (42476C4C)
This driver belongs to Asus ATK0110 ACPI Utility, it is a known BSOD causer in W7. I suggest that you uninstall.

How often have you been getting these BSODs?

http://www.sevenforums.com/bsod-help-support/400132-bsod-0x00000024-ntfs-sys-startup.html
Relevancy 64.07%

Hi All,

Seen this BSOD before during work "ntfs.sys", the user was due a upgrade to an SSD so we wiped the HDD and it got sent to WEEE waste.

Now I have the same BSOD on my personal laptop and I don't really want to install Win 7 again (no matter how easy it is)

Tried running CHKDSK, found no errors, same with sfc /scannow.

Nothing seems to trigger it and it will BSOD randomly, sometimes after logging in, sometimes after a few hours, resuming from standby, shutting down etc.

I've attached the dump file, now i'm just waiting for the good or bad news (please just be drivers )

Thanks, Max.

http://www.sevenforums.com/bsod-help-support/382930-random-bsod-ntfs-sys-ntsokrnl-exe-tried-few-things.html
Relevancy 64.07%

I keep getting random BSOD on my pc. I have reinstalled the OS to fix the errors but keep getting the errors at random times (ie, playing games, pulling the comp out of sleep mode, and browsing the net). I am new to the whole posting on this site so if I make any errors of can provide any more information please let me know.

System:
Windows 7 Home prem 64 bit Full Retail
Original OS installed on system
Hardware is only 1 year old
Reinstalled OS 2 weeks ago

A:Keep getting random BSOD ntoskrnle.exe, hal.dll, and Ntfs.sys errors

The drivers for your gaming keyboard (possibly steelseries) is horribly outdated and more than likely running in compatibility mode. I would attempt to update that driver immediately.


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e)
This is a very common bugcheck. Usually the exception address pinpoints
the driver/function that caused the problem. Always note this address
as well as the link date of the driver/image that contains this address.
Some common problems are exception code 0x80000003. This means a hard
coded breakpoint or assertion was hit, but this system was booted
/NODEBUG. This is not supposed to happen as developers should never have
hardcoded breakpoints in retail code, but ...
If this happens, make sure a debugger gets connected, and the
system is booted /DEBUG. This will let us see why this breakpoint is
happening.
Arguments:
Arg1: ffffffffc0000005, The exception code that was not handled
Arg2: fffff8000315eac2, The address that the exception occurred at
Arg3: fffff88007bd5998, Exception Record Address
Arg4: fffff88007bd51f0, Context Record Address

Debugging Details:
------------------
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

FAULTING_IP:
nt!RtlInterlockedClearBitRunEx+b2
fffff800`0315eac2 f0412102 lock and dword ptr [r10],eax

EXCEPTION_RECORD: fffff88007bd5998 -- (.exr 0xfffff88007bd5998)
ExceptionAddress: fffff8000315eac2 (nt!RtlInterlockedClearBitRunEx+0x00000000000000b2)
ExceptionCode: c0000005 (Access violation)
ExceptionFlags: 00000000
NumberParameters: 2
Parameter[0]: 0000000000000000
Parameter[1]: ffffffffffffffff
Attempt to read from address ffffffffffffffff

CONTEXT: fffff88007bd51f0 -- (.cxr 0xfffff88007bd51f0)
rax=00000000fffffffb rbx=ffffffffffffffff rcx=0000000000000002
rdx=04000000001f6b02 rsi=04000000001f6b02 rdi=0000058000000000
rip=fffff8000315eac2 rsp=fffff88007bd5bd8 rbp=bffffa8005e41060
r8=0000000000000002 r9=0000000000000001 r10=007ffa800a66cd70
r11=04000000001f6b02 r12=0000000000000002 r13=0000000000000001
r14=fffff88007bd5d00 r15=0000000000000000
iopl=0 nv up ei pl nz ac pe nc
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010212
nt!RtlInterlockedClearBitRunEx+0xb2:
fffff800`0315eac2 f0412102 lock and dword ptr [r10],eax ds:002b:007ffa80`0a66cd70=????????
Resetting default scope

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

PROCESS_NAME: System

CURRENT_IRQL: 2

ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

EXCEPTION_PARAMETER1: 0000000000000000

EXCEPTION_PARAMETER2: ffffffffffffffff

READ_ADDRESS: GetPointerFromAddress: unable to read from fffff800032fd100
ffffffffffffffff

FOLLOWUP_IP:
nt!RtlInterlockedClearBitRunEx+b2
fffff800`0315eac2 f0412102 lock and dword ptr [r10],eax

BUGCHECK_STR: 0x7E

LAST_CONTROL_TRANSFER: from fffff8000330f38b to fffff8000315eac2

STACK_TEXT:
fffff880`07bd5bd8 fffff800`0330f38b : ffffffff`ffffffff fffff880`07bd5d00 00000000`00000000 00000000`00000000 : nt!RtlInterlockedClearBitRunEx+0xb2
fffff880`07bd5be0 fffff800`03313b65 : fffff880`07bd5d00 fffff880`00000008 00000000`00000000 fffffa80`00000008 : nt!MmDuplicateMemory+0x8bb
fffff880`07bd5cd0 fffff800`03365fee : fffffa80`09efc470 fffffa80`0a0b5000 fffffa80`0a0b5060 fffff800`030c2757 : nt!PopTransitionToSleep+0xd5
fffff880`07bd5d40 fffff800`030bc5e6 : fffff800`03240e80 fffffa80`09efc470 fffffa80`06b25040 fffff880`01254a20 : nt!PspSyst... Read more

http://www.sevenforums.com/bsod-help-support/212579-keep-getting-random-bsod-ntoskrnle-exe-hal-dll-ntfs-sys-errors.html
Relevancy 64.07%

First time posting here should show how desperate I am to get these issues rectified Not really sure what is triggering these BSOD's At first I figured it was due to bad RAM but now the crashes seem to come in BSOD'ing: Random Kernel-power ntfs.exe? and two's Once out of no where and then again as soon as I log into my profile After that it seems to run fine until it decides to crash again Fairly new to all this technical stuff as well For Random BSOD'ing: Kernel-power and ntfs.exe? now I'll have a txt file attached to this post with info on my crashes Looking with NirSoft BluescreenView I've actually had a number of crashes related to different things It's all spanish to me And I certainly don't speak spanish Any help is greatly appreciated Specs 'n Such Intel R Core TM i CPU GHz ASUSTeK Computer INC P P D-E PRO BIOS Date Ver RAM GB WDC WD EACS- D B ATA Device AMD Radeon HD Series Microsoft Windows Ultimate -bit Multiprocessor Free Service Pack

A:Random BSOD'ing: Kernel-power and ntfs.exe?

Post it following the Blue Screen of Death (BSOD) Posting Instructions.

http://www.sevenforums.com/bsod-help-support/320583-random-bsoding-kernel-power-ntfs-exe.html
Relevancy 63.64%

I get the BSOD when restarting my machine (which I rarely do). It kicks in several seconds after my desktop comes up. After it restarts, it's usually fine (although sometimes it hits a second BSOD). But, once it's up and stable, no more BSOD. Thanks for any help tracking it down!

A:BSOD on startup, code 24 caused by Ntfs.sys

Uninstall DAEMON Tools Lite its known to crash windows 7

http://www.sevenforums.com/bsod-help-support/247296-bsod-startup-code-24-caused-ntfs-sys.html
Relevancy 63.21%

I get this BSOD every 3 days or so, and when I run WhoCrashed it claims that it is related to the two files mentioned in the title which are apparently driver issues, but all of my drivers are up to date so I really don't know where to start. I don't believe that it's a problem with the memory, as these aren't hardware issues according to the software I used to identify them, they're driver issues, and I recently replaced old faulty memory with working memory that has passed 8 times in MemTest86+ just a few days ago. The actual error messages vary all of the time, the only two I took note of were IRQL_NOT_LESS_OR_EQUAL and MEMORY_MANAGEMENT.

Thanks in advance,
Callum.

A:Random Driver Related BSOD (ntoskrnl.exe and ntfs.sys)

Your crash dumps are not showing any finite probable cause. In such a situation, it is better to enable Driver Verifier to monitor the drivers.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.



   Information
Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.



   Warning
Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.



   Tip

If you fail to get on the Desktop because of DV, Boot into Advanced Boot Options > Safe mode. Disable DV there. Now boot normally again, and try following the instruction of enabling DV again.
If you cannot boot in Safe mode too, do a System Restore to a point you made earlier.

Let us know the results, with the subsequent crash dumps, if any.

http://www.sevenforums.com/bsod-help-support/285430-random-driver-related-bsod-ntoskrnl-exe-ntfs-sys.html
Relevancy 63.21%

Hello i've got random BSOD occuring ever - ntfs.sys occurance BSOD 0x000000F4, atapi.sys, - random since i changed my video card from an ASUS EN GT to a GTX Ti Intel Core i ghz ASUS P H M CSM x GB Kingston DDR - Seagate Barracuda SATAII GB RPM Thermaltake Toughpower W ASUS GTX Ti GB LG x supermulti DVD Writer ASUS WL- G v wireless network card Zowie Hammer USB Soundcard Windows Home Premium x retail has ran on this machine since october The first occasions the BSODs displayed ntfs sys once and atapi sys twice Other occurances displayed a panoply of STOP BSOD - random occurance - 0x000000F4, atapi.sys, ntfs.sys x F codes all with different arguments I noted two of them quot x F x xFFFFFA B xFFFFFA E xFFFFF DB F BSOD - random occurance - 0x000000F4, atapi.sys, ntfs.sys quot quot x F x xFFFFFA BD xFFFFFA BD xFFFFF F quot my minidump is empty Windows doesn't write before pooping itself It's quite frustrating I know atapi is the IDE controller so i took the liberty of testing out if the dvd burner would work and it doesn't It crashes midway through burning I ran Windows NT BSOD v jcgriff exe and i attached the rar with everything in it I also attached a txt with an atapi sys error report i found Halp Attachment Attachment EDIT important to mention i also ran SFC scannow and chkdsk f and ran the HDD diagnostic on UBCD

A:BSOD - random occurance - 0x000000F4, atapi.sys, ntfs.sys

Sorry No DMP files included in upload, try this method.

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

If you are overclocking STOP

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.



To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

http://www.sevenforums.com/bsod-help-support/222259-bsod-random-occurance-0x000000f4-atapi-sys-ntfs-sys.html
Relevancy 62.78%

Hello A couple weeks ago i bought a brand new notebook a Lenovo G running Windows Home Premium x and a few days ago it started BSOD'ing to the point that it was impossible to use the computer because the BSOD happened almost every time The BSOD all had random error codes and almost always were because of ntoskrnl exe one time fltmgr sys and another time fileinfo sys i think according to bluescreenview I ran memtest for passes and fltmgr.sys, ntoskrnl.exe, Ntfs.sys multiple BSOD, codes Random - it right on the beginning it found like errors I called Lenovo support and they told me to format the computer using Lenovo's system partiton After the format i just left the pc running idle and after a while it BSOD again Booting in safe mode did not give BSOD I also ran Ubuntu via Live USB and did not have any crashes Random BSOD, multiple codes - ntoskrnl.exe, fltmgr.sys, Ntfs.sys In Ubuntu i left the computer running multiple p mkv movies in loop for half a day and also opened dozens of programs at once to try and stress the system and no crashes Temperature was normal After that i ran Memtest - No errors the k errors found before dont appear anymore Prime for a few hours - No errors crashes Furmark - No errors crashes temperatures ok Seatools Seagate HD Diagnostics - No errors crashes Lenovo's LSC Lite HD and Memory diagnostics - No errors crashes Even with all those tests i still got a few BSOD later So i was thinking that maybe the Lenovo's recovery system had a corrupted windows installation or there was a conflict with the pre-installed softwares drivers and decided to try another windows version I formatted again deleted the partitions and installed Windows Ultimate x After the second format now with Windows Ultimate x i left the pc running completely clean of drivers and applications for a few hours and no crashes So i installed a few drivers and a few applications I went to sleep and left Windows downloading updates All seemed well But this morning when installing the Windows' updates the system BSOD again The dump file is attached I really want to make sure that i have a hardware problem before sending it to the repair shop which can take up to days to get the computer back So any help will be greatly appreciated And sorry for the really long text i wanted to give the max number of informations as possible The system specs are Model Lenovo G Processor Intel Core I m Ram Memory GB stick Graphics Intel HD OS Windows Home Premium x OEM After nd format Windows Ultimate x retail installed yesterday

A:Random BSOD, multiple codes - ntoskrnl.exe, fltmgr.sys, Ntfs.sys

Almost impossible to diagnose a problem from a single DMP. There is no way to spot trends, etc. If this DMP is from the final re-install, and is supposed clean there are BT drivers, etc.

I am a big fan of Nir Sofer's work, BUT blueScreenView more often than not, doesn't point out the correct causes. Similarly Who crashed is even worse.

I prefer to use WinDbg (the Windows Debugging Tools) to read the memory dumps. It is the Gold standard for those of us that do this and often will give us the answer by itself. (we don't need the full jcgriff2 report each time).

This crash was related to a memory exception (probably a driver). You need to run memtest for 6-8 continuous passes.

Also run verifier as indicated below.

These crashes were caused by memory corruption/exception (Cx05) probably a driver.
Please run these two tests to verify your memory and find which driver is causing the problem.

* If you are overclocking anything reset to default before running these tests.
In other words STOP!!!

* If you have raid update its Driver.

Memtest.





Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5-7 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.



RAM - Test with Memtest86+

Driver verifier






Quote:
Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

So, I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Special Pool", "Force Pending I/O Requests" and "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen.
Continue to use your system normally, and if you know what causes the crash, do that repeatedly.
The objective here is to get the system to crash because Driver Verifier is stressing the drivers out.
If it doesn't crash for you, then let it run for at least 36 hours of continuous operation.

Reboot into Windows (after the crash) and turn off Driver Verifier by going back in and selecting "Delete existing settings" on the first page, then locate and zip up the memory dump file and upload it with your next post.

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created. You did create a restore point didnt you?


Using Driver Verifier (Windows Drivers)

http://www.sevenforums.com/bsod-help-support/223950-random-bsod-multiple-codes-ntoskrnl-exe-fltmgr-sys-ntfs-sys.html
Relevancy 62.78%

Hello I am new to posting here so apologies if I am duplicating any previous postings I have spent days trying to diagnose the problem with my HP Elitebook m notebook PC running Windows Pro with SP Actions taken so far Have run memtest and all came back fine Have also run HP memory diagnostics in the BIOS and all tests were passed Have run sfc scannow and also chkdsk and although some errors were found these were fixed Have run HP BIOS hard drive diagnostics test and HDD passed these tests Have run full Malwarebytes scan and all came back clear Have also run a proposed fix from tutorial found here NTFS sys error x - Tips and Tricks - www retosphere de amp using Knoppix Linux distro to run ntfsfix command The BSOD's are still occurring I can force the bsod to occur by attempting to launch Windows system restore Whilst trying to open the program the bsod happens I can also force the bsod to occur by opening HP Support Assistant and attempting to update the drivers it informs me have an Pro Random 7 ntfs.sys+c358a, in Windows BSOD ntoskrnl+f25b3 available update The updates available are for an update to the BIOS and to the Synaptics Pointing Device I am uploading the results of my SF Diagnotics Please Help This is my work laptop and it is very frustrating not to have managed to find a Random BSOD in Windows 7 Pro ntfs.sys+c358a, ntoskrnl+f25b3 solution and not be able to identify the cause of these crashes I really hope this doesn't require a rebuild as I only built this machine about weeks ago and transferred all my data from my previous work laptop

A:Random BSOD in Windows 7 Pro ntfs.sys+c358a, ntoskrnl+f25b3

Do you have Trend Micro installed? Please remove it for testing purpose. Use Microsoft Security Essentials.

Recommended from a strict BSOD perspective, compatibility & stability compared to other security software:

Microsoft Security Essentials - Free Antivirus for Windows

Malwarebytes - Free

Good and Free system security combination.

Reduce items at start-up: Startup Programs - Change

Perform a clean boot: Troubleshoot Application Conflicts by Performing a Clean Startup

Scan with Kaspersky TDSSKiller:Anti-rootkit utility TDSSKiller

ESET online scanner: Free Online Virus Scanner | ESET

Run a System file check (SFC): SFC /SCANNOW Command - System File Checker

Post screenshot(s) of your Hard Drive(s) using Crystal Disk Info Software: CrystalDiskInfo - Software - Crystal Dew World

Run a Hard Drive test: http://www.sevenforums.com/tutorials/313457-seatools-dos-windows-how-use.html


Run Disk Check on your Hard Drive(s): Disk Check

Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable!:-

mcdbus.sys Tue Feb 24 16:34:07 2009 (49A3CD1F)
MagicISO SCSI Host Controller driver
Driver Reference Table - mcdbus.sys

Perform a clean install of a driver following: How to Clean Left Over Driver Files with Driver Sweeper

Use Revo Uninstaller to uninstall stubborn software. Opt for Advance Mode while uninstalling which allows leftover registry removal:Download Revo Uninstaller Freeware - Free and Full Download - Uninstall software, remove programs, solve uninstall problems

Check for heating issues using Speccy or HWmonitor

Upload a screen shot: Screenshots and Files - Upload and Post in Seven Forums

BSOD Summary

Code:
Built by: 7601.18247.amd64fre.win7sp1_gdr.130828-1532
Debug session time: Thu Feb 20 14:35:23.854 2014 (UTC + 6:00)
System Uptime: 0 days 0:04:48.322
BugCheck 50, {fffff9810f2026a8, 0, fffff8800121ee60, 5}
Probably caused by : Ntfs.sys ( Ntfs!memcpy+250 )
BUGCHECK_STR: 0x50
PROCESS_NAME: System
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.18247.amd64fre.win7sp1_gdr.130828-1532
Debug session time: Thu Feb 20 01:08:26.123 2014 (UTC + 6:00)
System Uptime: 0 days 0:27:39.565
BugCheck 50, {fffff9811a2826a8, 0, fffff88001210e60, 5}
Probably caused by : Ntfs.sys ( Ntfs!memcpy+250 )
BUGCHECK_STR: 0x50
PROCESS_NAME: System
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.18247.amd64fre.win7sp1_gdr.130828-1532
Debug session time: Wed Feb 19 01:05:17.224 2014 (UTC + 6:00)
System Uptime: 0 days 4:53:31.321
BugCheck 50, {fffff9810c2c26a8, 0, fffff8800120fe60, 5}
Probably caused by : Ntfs.sys ( Ntfs!memcpy+250 )
BUGCHECK_STR: 0x50
PROCESS_NAME: System
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.18247.amd64fre.win7sp1_gdr.130828-1532
Debug session time: Mon Feb 17 14:12:24.877 2014 (UTC + 6:00)
System Uptime: 0 days 0:10:46.845
BugCheck 50, {fffff98114dc26a8, 0, fffff8800122ae60, 5}
Probably caused by : Ntfs.sys ( Ntfs!memcpy+250 )
BUGCHECK_STR: 0x50
PROCESS_NAME: System
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.18247.amd64fre.win7sp1_gdr.130828-1532
Debug session time: Sun Feb 16 16:15:12.494 2014 (UTC + 6:00)
System Uptime: 0 days 0:15:48.462
BugCheck 50, {fffff9811bb426a8, 0, fffff8800122be60, 5}
Probably caused by : Ntfs.sys ( Ntfs!memcpy+250 )
BUGCHECK_STR: 0x50
PROCESS_NAME: System
??????????????????????????????????????????????????????????????????????????????????????``

http://www.sevenforums.com/bsod-help-support/322629-random-bsod-windows-7-pro-ntfs-sys-c358a-ntoskrnl-f25b3.html
Relevancy 62.78%

Hello I have at Ntfs.sys error (STOP): BSoD times, random 0x000000C4 been encountering some BSoD trouble in the recent past In the most recent crashed the Ntfs sys filename appeared on the BSoD it was previously some BSoD at random times, error 0x000000C4 (STOP): Ntfs.sys other one Following the BSoD Analysis tutorial I grabbed the following information during the inspection of the most recent DMP file The initial 'Probably caused by' source BSoD at random times, error 0x000000C4 (STOP): Ntfs.sys was the ntoskrnl exe binary No analysis was available through ' analysis -v' Having activated the 'Driver verifier' I restarted normally The login screen appeared but when I logged in another BSoD appeared but the dump didn't work stuck I rebooted forcefully Still the Ntfs sys file I restarted again in normal mode letting the system finish to work on the HDD the little light stopped flashing intensively When I logged BSoD as before Still the Ntfs sys file I restarted in Safe Mode then I could log in without problem No new DMP file existed in the Minidump directory proof that the dump indeed didn't work at all I downloaded burned and rebooted on the MemTest software making only pass on the whole RAM without error I stopped there because I already have enough suspicions about some other hardware component Having rebooted under normal mode I am now running Prime if by any chance that's useful Following what I encountered I have strong evidence against my filesystem and maybe my HDD The system's filesystem driver crashes Ntfs sys When the verifier has been activated the system is unable to write to the disk that's in coherence with a filesystem's crash no access to it Filesystem is one of the most immediate thing used the crash at login time probably means that an early faulty action has been done I am still unsure about what precisely caused the error It doesn't appear at boot time not even at logon but at login The OS has already made plenty of accesses and loaded a lot of stuff It would mean something happens is loaded in user space to trigger the error Is the filesystem or one of the HDD the source of the problem Does a format would be useless usefull That's kinda huge thing to do I do not want to waste time if it doesn't change anything In case this comes from the filesystem here is some new information I defragmented my whole disks a few days ago and I ran a 'chkdsk f' on them after the first following Ntfs sys BSoD It seems some little space were in error but I never launched that command before Would it be more of some faulty system's HDD or the other one's segment Or kind of corrupted files on it I'd take any help and carefully weight advice

A:BSoD at random times, error 0x000000C4 (STOP): Ntfs.sys

Hi.

There are a few tools that can help us see the health status of the hard drive. Please do the following:

Perform a clean boot:
Troubleshoot Application Conflicts by Performing a Clean Startup
Upload a screenshot of your hard disk using CrystalDiskInfo:CrystalDiskInfo - Software - Crystal Dew World
Screenshots and Files - Upload and Post in Seven Forums
Make a hard drive test from the hard drive manufacturers website:Hard Drive Diagnostic Procedure
Hard drive test both short and long with: SeaTools for Windows
Seatools for DOS as well:
SeaTools for DOS
SeaTools for DOS tutorial
A screenshot of the "Summary" tab of Speccy will also be useful:
Speccy - System Information - Free Download
NTFS errors can also be caused by VIRUS and ANTIVIRUS software.What antivirus do you use?Please upload your msinfo32.nfo file. To get this: Start Menu -> Type msinfo32 into the Search programs and files box -> When it opens, go to File, Save -> Save as msinfo32.nfo and save in a place you will remember -> Let it finish the process of gathering and saving the system info -> Right click the .nfo file, click send to compressed (zipped) folder -> Upload the .zip file here.

Please upload your msinfo32.txt file. To get this: Start Menu -> Type msinfo32 into the Search programs and files box -> When it opens, go to File, Export -> Save as msinfo32.txt and save in a place you will remember -> Let it finish the process of gathering and saving the system info -> Right click the .txt file, click send to compressed (zipped) folder -> Upload the .zip file here.

Perform a System File Check:Click on the start
Type CMD on Search
Left click and Run as Administrator
Type SFC /scannow
Full tutorial here:SFC /SCANNOW Command - System File Checker
Configure for Small Memory Dumps following this tutorial:
Dump Files - Configure Windows to Create on BSOD

Make scans with the following:

-Kaspersky TDSSKillerAnti-rootkit utility TDSSKiller
-ESET online scannerFree Online Virus Scanner | ESET
Look forward to the results.

If Driver verfier is enabled, please disable it for now.

http://www.sevenforums.com/bsod-help-support/272254-bsod-random-times-error-0x000000c4-stop-ntfs-sys.html
Relevancy 56.76%

Hello everyone, I have been getting random BSOD's which seems to be all related to the NTFS.sys and ntoskrnl.exe and I hope someone might be able to tell me the cause of this and how I can solve it.

I uploaded the dumps files like the sticky tells me to.

extra information:

computer name: KENHOUSIAUX-PC
windows version: Windows 7 Service Pack 1, 6.1, build: 7601
windows dir: C:\Windows
CPU: GenuineIntel Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz Intel586, level: 6
8 logical processors, active mask: 255
RAM: 8496668672 total
VM: 2147352576, free: 1945604096

Thank you in advance.

Sincerely Ken Housiaux

A:Random "NTFS related" BSOD crashes.

Hi,

Two dumps attached, IRQL_NOT_LESS_OR_EQUAL (a) and NTFS_FILE_SYSTEM (24). 24 being present is enough to warrant HDD diagnostics as well as RAM testing:

Hard Drive (HDD) Diagnostics - Sysnative Forums

For testing your RAM:

Memtest86+:


Quote:




Download Memtest86+ here:





Quote:





http://www.memtest.org/

Which should I download?

You can either download the pre-compiled ISO that you would burn to a CD and then boot from the CD, or you can download the auto-installer for the USB key. What this will do is format your USB drive, make it a bootable device, and then install the necessary files. Both do the same job, it's just up to you which you choose, or which you have available (whether it's CD or USB).

How Memtest works:

Memtest86 writes a series of test patterns to most memory addresses, reads back the data written, and compares it for errors.

The default pass does 9 different tests, varying in access patterns and test data. A tenth test, bit fade, is selectable from the menu. It writes all memory with zeroes, then sleeps for 90 minutes before checking to see if bits have changed (perhaps because of refresh problems). This is repeated with all ones for a total time of 3 hours per pass.

Many chipsets can report RAM speeds and timings via SPD (Serial Presence Detect) or EPP (Enhanced Performance Profiles), and some even support changing the expected memory speed. If the expected memory speed is overclocked, Memtest86 can test that memory performance is error-free with these faster settings.

Some hardware is able to report the "PAT status" (PAT: enabled or PAT: disabled). This is a reference to Intel Performance acceleration technology; there may be BIOS settings which affect this aspect of memory timing.

This information, if available to the program, can be displayed via a menu option.

Any other questions, they can most likely be answered by reading this great guide here:

http://forum.canardpc.com/threads/28864-FAQ-please-read-before-posting





Regards,

Patrick

http://www.techsupportforum.com/forums/f299/random-ntfs-related-bsod-crashes-700118.html
Relevancy 56.33%

hi.
my laptop started to bsod after power failure.
since then my laptop got random bsod.
after bsod i cant startup my laptop.
need to wait about 1-2 hours to boot.

laptop specs:
intel i7-3610QM
nvidia geforce GTX 660M/2gb DDR5
RAM 8GB DDR3
HDD 750 gb 7200 rpm

i need some helps

thanks

A:BSOD after playing games + Random BSOD on startup

Welcome

Your dumps don't have a probable cause, keep blaming windows files (Not true causes)

Since everything was fine with the laptop before the power failure, your best bet would be to dismantle and reconnect all the hardware components (if you're good with it) and do a fresh install of windows on your laptop

Fill in your specs and the make of the laptop
__________________
Click on User CP on the top right of this page
Click on Edit System Spec
Fill in your computer specs
→ System Info - See Your System Specs
__________________

See if any of these tutorials are helpful to you
→ Troubleshooting Windows 7 Failure to Boot
→ Troubleshooting Steps for Windows 7
→ Clean Install : Factory COA Activation Key
→ Clean Reinstall - Factory OEM Windows 7
→ Clean Install Windows 7
→ SSD / HDD : Optimize for Windows Reinstallation

Good luck

http://www.sevenforums.com/bsod-help-support/257533-bsod-after-playing-games-random-bsod-startup.html
Relevancy 55.9%

I am setting up a Win7 install using a 'scratch disk which formatted and has the operating system.

My media files are on older XP machine. The file transfer should be speedy on the
same computer but it is very slow.

Is there an instruction needed to 'pass through' more efficiently?

Example: 1 Gb file is taking 16 minutes or longer and a simple program folder of a small program will take 4 mins. It seems to be crawling.

Is there some difference between NTFS on XP and Win7?

If I have overlooked a previous answer, apologies.

A:Move an XP file in NTFS to Win7 NTFS is very slowed down on computer

What is the transfer medium? A network? Null cable? You don'tgive enough info to tell what you are doing other than that you are copying from XP to W7.

http://www.sevenforums.com/general-discussion/383483-move-xp-file-ntfs-win7-ntfs-very-slowed-down-computer.html
Relevancy 55.04%

Hello I have been having this BSOD issue help. - BSOD On Startup, Random please lately and I dont know what has casued this to start but I do suspect it is the video card The BSOD - On Random Startup, please help. card is a MSI Hawk and its brand new but the issues if I recall correctly didnt start happening till it was installed So the problem is randomly I will boot up the PC and it will get to the black windows logo screen then crash and reboot It has done it now BSOD - On Random Startup, please help. in the last couple of days on id say bootup's it would BSOD - On Random Startup, please help. crash half the time I did a fresh install of the OS Win with updated drivers but I used nvidia drivers that were older I believe and not I thought maybe the drivers were the problem Anyways please any help would be nice b c I dont know if its a software thing or a hardware and I dont want to waste money on replacing parts that are not the problem I dont understand these dump files or anything but I did record and follow the posting FAQ so I could get the correct help Thank you for your time Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode e BCP FFFFFFFFC BCP FFFFF DFAB BCP BCP BC OS Version Service Pack Product Files that help describe the problem C Windows Minidump - - dmp C Users Jason AppData Local Temp WER- - sysdata xml

A:BSOD - On Random Startup, please help.

Hello and welcome to Seven Forums,
- Boot into safe mode with networking
- Uninstall the nVidia Drivers
- Use driver sweeper to remove leftover nVidia display driver files Guru3D - Driver Sweeper
- Install the latest drivers Drivers - Download NVIDIA Drivers
- Reboot into normal mode

Also, update this most cause driver.

Code:
ASACPI.sys Mon Mar 28 15:30:36 2005





Quote:
The 2005 version of this driver is a known BSOD cause.
Please visit this link: ASUSTeK Computer Inc.-Support- download_item_mkt
Scroll down to the Utilities category, then scroll down to the "ATK0110 driver for WindowsXP/Vista/Windows 7 32&64-bit " (it's about the 11th item down).
Download and install it.
Go to C:\Windows\System32\drivers to check and make sure that the ASACPI.sys file is date stamped from 2009 or 2010 (NOT 2005).


Also, update this driver.





Quote:
yk62x64.sys Tue Feb 24 04:02:27 2009 - Marvell Yukon Networking
http://www.marvell.com/support.html

http://www.sevenforums.com/bsod-help-support/144028-bsod-random-startup-please-help.html
Relevancy 55.04%

Post here about a month ago with BSOD after coming out of a sleep....Updated various drivers then no longer put pc in sleep/hibernate mode. Turn PC on/off when finished....no problems until today....


Yesterday downloaded and used Vivaldi 64 bit experimental Beta.....not sure if that could be the cause....


Any help/suggestions appreciated...

A:BSOD Random after Startup

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa800bb2a060, fffff80000b9a3d8, fffffa800c714460}

*** WARNING: Unable to verify timestamp for iusb3hub.sys
*** ERROR: Module load completed but symbols could not be loaded for iusb3hub.sys
Probably caused by : iusb3hub.sys

Followup: MachineOwner
---------

0: kd> irp fffffa800c714460
^ Syntax error in 'irp fffffa800c714460'
0: kd> !irp fffffa800c714460
Irp is active with 9 stacks 8 is current (= 0xfffffa800c714728)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 e1 fffffa800c016030 00000000 00000000-00000000 pending
Unable to load image \SystemRoot\system32\DRIVERS\btfilter.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for btfilter.sys
*** ERROR: Module load completed but symbols could not be loaded for btfilter.sys
\Driver\BtFilter
Args: 00000000 00000001 00000003 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-fffffa800ca18740

Args: 00000000 00000000 00000000 00000000
fffff880`072d0000 fffff880`07378000 btfilter T (no symbols)
Loaded symbol image file: btfilter.sys
Image path: \SystemRoot\system32\DRIVERS\btfilter.sys
Image name: btfilter.sys
Timestamp: Wed Sep 24 19:22:52 2014 (54229474)
CheckSum: 00099340
ImageSize: 000A8000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
The Atheros bluetooth driver appears to be the issue. See if you can update it here:
https://www.atheros.cz/

http://www.sevenforums.com/bsod-help-support/388001-bsod-random-after-startup.html
Relevancy 55.04%

Hello, I have been getting BSOD before windows start up and some times after as well. I have posted the
windows error message I get after reboot and attatched dump files. Please let me know what other information I may provide.

Thank you.

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 7f
BCP1: 0000000000000008
BCP2: 0000000080050033
BCP3: 00000000000406F8
BCP4: FFFFF800034C6E3F
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\111814-24460-01.dmp
C:\Windows\Temp\WER-36036-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

EDIT 1: My computer started restarting every 5-7 seconds. This makes me think I must at least have a hardware issue. This is just my intuition though. Thoughts?

A:BSOD at startup + random

There is a wide versatility in the bugcheck codes and the probable causes.

Test your RAM modules for possible errors. How to Test and Diagnose RAM Issues with Memtest86+
Run memtest86+ for at least 8 consecutive passes.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

It it does not show any error, enable Driver Verifier to monitor the drivers. Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.



   Information
Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.



   Warning
Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.



   Tip

If you fail to get on the Desktop because of DV, Boot into Advanced Boot Options > Safe mode. Disable DV there. Now boot normally again, and try following the instruction of enabling DV again.
If you cannot boot in Safe mode too, do a System Restore to a point you made earlier.

Let us know the results, with the subsequent crash dumps, if any.
____________________________________________________________

Code:
BugCheck 3B, {c0000005, fffff8000379e8d9, fffff88006b8f8f0, 0}

Probably caused by : ntkrnlmp.exe ( nt!CmpGetNameControlBlock+12e )

Followup: MachineOwner
---------

Code:
BugCheck 50, {fffff87ffc62c870, 8, fffff87ffc62c870, 5}
Could not read faulting driver name
Probably caused by : fileinfo.sys ( fileinfo!FIStreamGetInfo+11f )

Followup: MachineOwner
---------

Code:
BugCheck D1, {fffffa8027308910, 2, 0, fffff880018fa8c9}

Probably caused by : NETIO.SYS ( NETIO!IndexListClassify+50 )

Followup: MachineOwner
---------

http://www.sevenforums.com/bsod-help-support/352670-bsod-startup-random.html
Relevancy 55.04%

Rarley when I turn on my comp after it's been off overnight it bluescreens,
I am not sure when it does it, ie during windows booting to desktop or loading.. as I tend to turn it on and walk away for a minute.. usually to go turn on my coffee pot.
Anyways,
I ran this in hopes of find the issue..
attached dump file ran with SFchecker program.

Diag.txt remvoed for now.

A:Random BSOD at startup

Hi

There are no recent dumps. The last one is on 23.9.2012..Does it act the same way in Safe mode?

Perform a clean boot:Troubleshoot Application Conflicts by Performing a Clean Startup
Run the System File Checker that scans the of all protected Windows 7 system files and replaces incorrect corrupted, changed/modified, or damaged versions with the correct versions if possible:
Click on the
Type CMD on Search
Left click and Run as Administrator
Type SFC /scannow

Full tutorial here:SFC /SCANNOW Command - System File Checker
Make scans with the following:

-Kaspersky TDSSKiller Anti-rootkit utility TDSSKiller
-ESET online scannerFree Online Virus Scanner | ESET

Let us know the results

http://www.sevenforums.com/bsod-help-support/267160-random-bsod-startup.html
Relevancy 55.04%

Hi there,just like everyone else,after building a new rig(due to bf3),all i got was a random bsod.i have never experience this before (have built a total of 5PC before)though never had an ssd before.
would really appreciate your help!

my system specs:

win7 ultimate sp1 64bit
2500k
z68m/usb3
4x2 @1600 kingston hyperX
9800gt 512
60gb ssd ocz solid3
cm 550w 80+

all running @stock speed.

A:random BSOD after startup

  
Quote: Originally Posted by sugh


Hi there,just like everyone else,after building a new rig(due to bf3),all i got was a random bsod.i have never experience this before (have built a total of 5PC before)though never had an ssd before.
would really appreciate your help!

my system specs:

win7 ultimate sp1 64bit
2500k
z68m/usb3
4x2 @1600 kingston hyperX
9800gt 512
60gb ssd ocz solid3
cm 550w 80+

all running @stock speed.


It is much easier to find patterns, etc, when there are more than one crash. We prefer you wait until you have at least two so that if one is corrupt the other probably wont be.

The current one is inconclusive but shows some old drivers.

Drivers needing update

Code:
SNCAMD.SYS 1/25/2007 5:48:38 AM fffff880`07df4000 fffff880`07dfc380 0x00008380 0x45b88b06
snp2sxp.sys 5/10/2007 3:11:58 AM fffff880`0720b000 fffff880`07df3080 0x00be8080 0x4642d3ce
FNETURPX.SYS 10/3/2008 9:27:02 PM fffff880`01dcb000 fffff880`01dd4000 0x00009000 0x48e6d476

I would also run a system file to check

Run a system file check to verify and repair your system files.





Quote:
To do this type cmd in search, then right click to run as administrator, then
SFC /SCANNOW

It may need to be run up to three times before successful
Let us know the results from the report at the end.


Read here for more information SFC /SCANNOW Command - System File Checker

http://www.sevenforums.com/bsod-help-support/206934-random-bsod-after-startup.html
Relevancy 55.04%

HP Pavilion Laptop zv us Ghz Pentium Gb RAM Windows XP Home w SP As a starting point of information I have had to replace the HDD in this computer twice in years Was replaced last in May Recently I had experienced a period of startups where the computer would blue screen real quick in the middle of the bootup It did the same BSOD every startup at the same spot Did a Windows Repair via the startup disks and the computer booted fine three tiems after taht Then the weird things started to happen Boot after Windows Repair No Video Windows booted successfully as I could hear the Windows Startup sound when it reached that point As well as the Windows Shutdown sound when I tapped the power button Boot after Windows Repair BSOD during the Windows Splash Screen unknown code Boot BSOD during the playing of the Windows Sound Code x F Boot BSOD during the Windows Welcome Screen Code x Boot BSOD immediately following BIOS splash screen Code x B Boot BSOD during Windows Loading splash screen Loading Bar screen Code x E Boot Windows booted successfully AVG Anti-Virus errored out during startup Boot - - - - Windows booted successfully No anomalies detected Boot Windows booted successfully Winlogon crashed immediately after BSOD random gets XP on startup Windows start forcing immediate Windows shutdown Boot C windows system config system missing Failed to boot Boot Windows booted successfully No anomalies detected -------------------------------------- Several different Anti-Virus Malware Spyware XP gets random BSOD on startup programs detect nothing wrong and computer shows no real virus activity or symptoms BSOD codes don t lead to anything specific Memtest passes Tried on different occasions with all three ways of putting in RAM Chkdsk shows no errors Drivers are all accurate and up-to-date BIOS version is the most recent Nothing has really been changed in the past few days except for security software updates and a Windows update or two ---------------------------------------- I honestly have no idea where to go from here Perhaps some wiser soul out there has an idea that makes sense

A:XP gets random BSOD on startup

This is, IMO, the most significant error:Boot 8: BSOD immediately following BIOS splash screen, Code 0x7BIt means that the boot device on your system isn't accessible.So, the first thing to try would be a bootable hard drive diagnostic. A listing of the more common ones is in this topic: http://www.bleepingcomputer.com/forums/t/28744/hard-drive-installation-and-diagnostic-tools/If the test passes, then it's time to go into the Recovery Console (tutorial here: http://www.bleepingcomputer.com/tutorials/how-to-install-the-windows-xp-recovery-console/ ) and run several commands:FIXMBRFIXBOOTCHKDSK /RPress Enter after each one and answer "Y" (for Yes) to each of the dire warnings that it gives you.Post back and let us know what happened.

http://www.bleepingcomputer.com/forums/t/206763/xp-gets-random-bsod-on-startup/
Relevancy 55.04%

I have random BSOD at startup, sometimes it happens before windows loads, and sometimes the loading completes and I can get into explorer or outlook and then again sometimes it doesn't happen at all. This has been happening for about 4 weeks. When it crashes to blue screen it reboots and goes to black startup uptions screen asking if I want safe mode or normal mode. Very frustrating as it's random and I've tried disconnecting just about everything to isolate the problem. I have attached required files.

A few months ago, I received help here for another issue which was solved and was to do with tv card drivers, I don't think I cleaned out the minidump files following that one.

System;
Intel I7 3.20ghz
4.00gb Ram
ATI Radeon HD 5800
2x 1TB hard disks
win7 32bit

Thanks in advance,
Ron.

A:Random BSOD at startup

For starts you have a 1999 driver Related to Aspi32.sys Generic drivers. That need to be fixed before we can even investigate the hardware issues.

http://www.sevenforums.com/bsod-help-support/220258-random-bsod-startup.html
Relevancy 54.61%

Hello all,

Firstly I would like to thank every one for their time in helping us newbies solve our computer woes, your help is greatly appreciated.

Now to the point....I seem to keep having random BSOD'S on windows startup showing a Kernal_Security_Check_Failure and in event viewer it is showing as Bug_Check_Code 313, I have no idea what is causing this.

I also seem to be randomly getting BSOD'S while either exiting/starting a game or loading up Unity (Game engine).

As stated in the instructions above I have used the SF_Diagnostic_Tool and have attached the contents to this post.

If anyone could chime in and help me out I would be most grateful.

Regards

A:Windows 8 random BSOD on startup

Hi
Supermunkey ,

The problem you are facing is due to a C++ object got corrupted, you might be getting a BSOD's KERNEL_SECURITY_CHECK_FAILURE error code 0x00000139. to resolve this error i would suggest you to install the drivers again and install latest updates for your windows.

http://www.eightforums.com/bsod-crashes-debugging/28664-windows-8-random-bsod-startup.html
Relevancy 54.61%

Hi, I've been having these random BSOD crashes lately about 2 days from now and it triggers about less than 20 minutes after boot. When it did pass over 30 minutes or so, I can use it without any problems.

Everything is brand new except for GPU (less than a year), Proc AMD Phen2x4 and 4G Ram (both 3yrs). Had a fresh install of windows and some software for no more than a month and I have received BSOD just now.

I have attached log files. Any help and direction would be much appreciated. Thanks in advance!

A:Random BSOD 5-20 minutes from startup

Uninstall your current antivirus as it is contributing to your BSOD's. Replace with Microsoft Security Essentials & the Free version of Malwarebytes, update and make full scans separately:Uninstallers (removal tools) for common antivirus software - ESET Knowledgebase

Help protect your PC with Microsoft Security Essentials

Malwarebytes Free Do not start the trial version of MalwareBytes

You may also take a look at:Good & Free System Security CombinationReduce items at start up:Performing a Clean Startup in Windows 7

Add, or Remove Startup Programs in Windows 7
Your Antivirus software is basically whats just needed there.

Use the System File Checker tool and Run Disk Check: Repair Windows 7 System Files with System File Checker

Run Disk Check in Windows 7 for Bad Sectors & Errors
Drivers: - Please update to the latest or uninstall the software and its drivers below.



   Information
Download and install Revo Uninstaller free from here: Download Revo Uninstaller FreewareOpt for "Advanced Mode" and uninstall the software (also delete the leftover registry entries).



GVTDrv64.sys Tue Sep 5 13:10:02 2006
Gigabyte Easy Tune 6 driver (known BSOD issues w/Win7)
Driver Reference Table - GVTDrv64.sys

gdrv.sys Fri Mar 13 09:22:29 2009
Gigabyte Easy Saver - mobo power utility driver
Driver Reference Table - gdrv.sys

AODDriver.sys Thu Mar 4 16:58:24 2010
AMD Overdrive; also in EasyTune6 for Gigabyte motherboard [br] Known BSOD issues in Win7
Driver Reference Table - AODDriver.sys

AppleCharger.sys Thu Mar 8 07:48:06 2012
GIGABYTE On/Off Charge driver. See here for details - GIGABYTE ON/OFF Charge [br] May cause BSOD on Win7/8 systems - uninstall to test (haven't seen recently (15Jan2013))
Driver Reference Table - AppleCharger.sys

AODDriver2.sys Thu Apr 5 15:23:37 2012
AMD Overdrive; also in EasyTune6 for Gigabyte motherboard [br] Known BSOD issues in Win7
Driver Reference Table - AODDriver2.sys

(AODDriver2.sys) is either a stand-alone application, or a component of the AMD VISION Engine Control Center. This driver is known to cause BSOD's on some Win7 systems. Please uninstall all AMD/ATI video stuff from Control Panel...Programs...Uninstall a program. Then, download (but DO NOT install) a fresh copy of the ATI drivers from Global Provider of Innovative Graphics, Processors and Media Solutions | AMD (in the upper right corner of the page) Use this procedure to install the DRIVER ONLY: ATI video cards - DRIVER ONLY installation procedure

dtsoftbus01.sys Thu Jun 20 13:22:51 2013
Daemon Tools driver [br] Possible BSOD issues in Win7
Driver Reference Table - dtsoftbus01.sys

Daemon Tools (and Alcohol % software) are known to cause BSOD's on some Win7 systems (mostly due to the sptd.sys driver, although we have seen dtsoftbus01.sys blamed on several occasions). Please uninstall Daemon Tools.DuplexSecure - FAQAs an alternative, many people recommend the use of Total Mounter or Magic ISO

Upload a screenshot using:CrystalDiskInfo For how to upload a screenshot or file, read here

Test your Hard Drive by running:Hard Drive Diagnostic ProcedureTest and Diagnose RAM Issues with Memtest86+:RAM - Test with Memtest86+

   Tip
Pay close attention to part 3 of the tutorial "If you have errors"
Test the RAM with Memtest86+ for at least 7-10 passes. It may take up to 22 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold.


Monitor hardware temperature with system monitoring software like Speccy or HWMonitor:
Piriform - Speccy

CPUID - HWMonitorDumps....

Code:
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
Debug session time: Mon Aug 19 10:10:36.081 2013... Read more

http://www.sevenforums.com/bsod-help-support/301707-random-bsod-5-20-minutes-startup.html
Relevancy 54.61%

From about 1 week i have some BSOD random during few minutes after startup. I haven't change any hardware component and i haven't install any new driver/program so i can't undestand the problem. I have already tested my cpu-ram with 6h of orthos's intensive test but i haven't find any problem. Generally i use the pc with a light OC but after the first BSOD i have loaded default settings, but the problem persist.

P.S. my hardware have about 4 years

A:BSOD random during few minutes after startup

Hi.

In this order,

Update software\driver for Asus ATK0110 ACPI Utility (a known BSOD maker in Win7). Also a part of the Asus PCProbe and AISuite Utilities Yours is old from 28-Mar-05 No way to work with windows 7
ASUSTeK Computer Inc. -Support- Drivers and Download
Remove comodo from your system for testing purposes.
For now download,install and use Microsoft Security Essentials with windows firewall.
Update software\driver for your Wacom(tablet) Mouse Filter
http://www.wacom.com/CustomerCare/Drivers.aspx
Run RAM - Test with Memtest86+
Finish with these steps and post back.

http://www.sevenforums.com/bsod-help-support/198883-bsod-random-during-few-minutes-after-startup.html
Relevancy 54.61%

Hi,

I've been having problems lately with BSOD on my desktop. Usually it boots up fine the first time on a given day, but gives a BSOD within 5 mins in windows. After a BSOD it won't startup, unless I turn it off completely and wait maybe 10 mins before i try again.

I did a format and a fresh install a couple of days ago, to no help at all. Except the first time i used it after the fresh install, it was running fine the whole evening.

A:Random BSOD and startup problems

Install Service pack 1 and all other windows updates. Otherwise the system will remain vulnerable to threats.

Code:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Learn how to install Windows 7 Service Pack 1 (SP1)
Service Pack Center - Microsoft Windows

Seatool for dos: SeaTools | Seagate download. Burn it in a blank cd. boot from the CD, click on "Accept", wait for it to finish detecting the drives, then in the upper left corner select "Basic Tests", then select "Long Test" and let it run. You can use Win32 DiscImager to create a bootable USB and run Seatools for DOS. Follow this post to know how to make a bootable Seatools USB.

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

Install the latest WHQL only.
Uninstall All nvidia items in Control Panel > Programs and features3D Vision Control Driver
3D Vision Driver
Graphics Driver
HD Audio Driver
PhysX
nvidia Update
(Are you using nvidia chipset drivers? If so, dont uninstall anything other than those are listed).
Now follow Drivers - Clean Left over Files after Uninstalling
Boot normally now. Go to Drivers - Download NVIDIA Drivers, Download 314.22 WHQL. While installing, Select Custom (Advanced) install. In the next page, follow this settings:
Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

Also need to know some other information including the antivirus in use. So upload your MSINFO32.nfo file.
Click on the start button
Type "msinfo32" (without quotes) in the search bar of the start menu, click the resulting link. It will open the System Information window.
File>Save. In the "File Name" filed, put "MSINFO32" (without Quote), give the save location to desktop, and click the "save" button.
Give the time for processing, it will save a .nfo file on your desktop.
Zip it, and upload it following the instruction.
Let us know the results.
_______________________________________________________________________________

Code:
BugCheck A, {fffffa80faa3eea8, 2, 0, fffff80002af72c4}

Probably caused by : memory_corruption ( nt!MiResolveProtoPteFault+144 )

Followup: MachineOwner
-------------------------------------------------------------------------------
BugCheck 50, {ffffed80180e358f, 1, fffff80002d73e4e, 7}
Could not read faulting driver name
Probably caused by : hardware ( nt!IopParseDevice+f7e )

Followup: MachineOwner
-----------------------------------------------------------------------------------
BugCheck D1, {7a0, 2, 1, fffff8800152e80a}

Probably caused by : NETIO.SYS ( NETIO!WfppLeastRecentlyUsedTimerRoutine+8a )

Followup: MachineOwner
---------

http://www.sevenforums.com/bsod-help-support/297395-random-bsod-startup-problems.html
Relevancy 54.61%

i dont know but it happent some time on startup. i setup BSODviewer and it show problem with atikmdag.sys. i guess my VGA problem.
help me pls
thank for your time!

A:windows 8.1 BSOD random on startup

Yes, atikmdag is related to your AMD graphics card. I'm not a dump reader, but someone who is will stop by and help.

While you wait, please fill in as much information as you can on your EightForums system specs. That will also help the member who will help you.

http://www.eightforums.com/bsod-crashes-debugging/60131-windows-8-1-bsod-random-startup.html
Relevancy 54.61%

Many BSOD failures. Diagnostic file attached.
I have set the system to write a minidump, but the system does not write it.
Thanks in advance for our assistance

A:BSOD at random times, often at startup

The uploaded zip does not contain any crash dump. Probably for the reason that all the BSODs are during startup?

Free up the startup. Windows does not need any other program to auto start with it, but the auto start programs often conflicts and causes various problems including BSODs.
Click on the Start button
Type ?msconfig (without quotes), click the resulting link. It will open the System Configuration window.It will open the system configuration window, with the "general" tab selected.Click the "startup" tab. Click "Disable all" > Apply > OK.
Click on "services" tab. Check the "Hide all Microsoft Services"; Click "Disable all" > Apply > OK

Accept then restart.
Then try to boot again normally. Is it BSODing still?

http://www.sevenforums.com/bsod-help-support/324034-bsod-random-times-often-startup.html
Relevancy 54.61%

Hello, My computer is getting BSOD random about once in 2 days, today twice when windows started, i attached the latest dump file. Thank you in advice!

A:Random BSOD on windows startup

  
Quote: Originally Posted by ErcOac


Hello, My computer is getting BSOD random about once in 2 days, today twice when windows started, i attached the latest dump file. Thank you in advice!


We need more than one DMP to establish a pattern or trend. Please upload the rest

http://www.sevenforums.com/bsod-help-support/197458-random-bsod-windows-startup.html
Relevancy 54.61%

I have been getting random BSOD every day almost every 30 or 15 mins.I think it is hardware problem becouse even on fresh windows 7 install it still getting BSOD.

PC Specs:


OS Name Microsoft Windows 7 Professional
Version 6.1.7601 Service Pack 1 Build 7601
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name GOSHET0-PC
System Manufacturer BIOSTAR Group
System Model P31-A7
System Type X86-based PC
Processor Intel(R) Pentium(R) Dual CPU E2200 @ 2.20GHz, 2200 Mhz, 2 Core(s), 2 Logical Processor(s)
BIOS Version/Date Phoenix Technologies, LTD 6.00 PG, 29.2.2008 г.
SMBIOS Version 2.5
Windows Directory C:\Windows
System Directory C:\Windows\system32
Boot Device \Device\HarddiskVolume1
Locale United States
Hardware Abstraction Layer Version = "6.1.7601.17514"
User Name goshet0-PC\goshet0
Time Zone FLE Daylight Time
Installed Physical Memory (RAM) 2,00 GB
Total Physical Memory 2,00 GB
Available Physical Memory 1,13 GB
Total Virtual Memory 4,00 GB
Available Virtual Memory 2,69 GB
Page File Space 2,00 GB
Page File C:\pagefile.sys

I really need this solved.Thanks.

A:Random BSOD On Startup And Almost Every 15Mins

Hello Goshet and welcome to Sevenforums.

To be able to help you, we'd a full report. This includes, crash dumps, nfo etc. To get these files, use our thread below.

http://www.sevenforums.com/crashes-d...tructions.html

Updating System Specs will give us a better sight of
how your system is put together. It's simply done.? Download Speccy
? |User CP (top of the page)| |Edit System Spec|
? COPY & PASTE section to section
? Include Laptop, Desktop information
? End with |Save Changes|BSOD ANALYSE

Combining your crash dumps and the general view of BSODs culprits, I'd suggest you to have a look at your memory, the sticks. Through decades people have been using the bootable tool called Memtest86+ and it's basically very unique in these manners.
Be sure to check your warranty rules and regulations before opening your case.* Memtest86+ is USB-ready, and can be booted directly from it. Download the flashdrive wizard.
* To ensure that either your sticks OR your motherboard slots are broken, it's necessary to do the below procedure-
* Pull out all sticks except ONE, scan it.
* If no errors, pull the scanned stick into another slot.
* Proceed like this until you've scanned all sticks individually, and all the slots.I honestly don't know too much until we have a full report.

Best Regards,
Frederik.

http://www.sevenforums.com/bsod-help-support/254231-random-bsod-startup-almost-every-15mins.html
Relevancy 54.61%

Hello,

I've experienced some issue with my PC recently and formatting it didn't help. Please find attached the required files.

The BSOD are essentially random, and sometimes when I power up the PC, it just doesn't startupt, staying stuck in the BIOS or something.

I have an Acer predator, win7 64 bits (OEM)

Thank you for your help !

A:random BSOD, sometime I get stuck at startup

Hello Nauyt and welcome to Sevenforums.

A few things we'll need

We appreciate your .zip file containing system information and health diagnoses, but we'll need your dump files in order to analyse your actual BSODs you're experiencing.

Your Minidump folder should be at the path C:\Windows\Minidump. If there's no files, make sure minidumps are enabled by -





Quote:
Go to Start, then Run, then type in "sysdm.cpl" (without the quotes) and press Enter
Click on the Advanced tab
Click on the Startup and Recovery button
Ensure that "Automatically restart" is unchecked
Under the Write Debugging Information header select "Small memory dump (64 kB)" in the dropdown box
Ensure that the Small Dump Directory is listed as "%systemroot%\Minidump" (without the quotes)
Click OK twice to exit the dialogs, then reboot for the changes to take effect.


Next time you'd experience a BSOD, a dump is supposed to be generated. When it's generated, wrap it up in a zip and upload it.

Thanks!
Frederik.

http://www.sevenforums.com/bsod-help-support/236896-random-bsod-sometime-i-get-stuck-startup.html
Relevancy 54.61%

Hi all sorry for the lack of grammatical effort put into this I'm not sure when i'll get a BSOD again This problem started occuring around August September of this year nothing new installed no virus seems to be causing this either I've been using WinDBG to try to figure this out and I can't seem to find any luck Code Microsoft R Windows Debugger Version AMD Copyright c Microsoft Corporation All rights reserved Loading Dump File C Windows Minidump - - dmp Mini Kernel Dump File Only registers and stack trace are available Symbol search path is srv Executable search path is Windows Kernel Version Service Pack startup random during times..even at BSOD MP procs BSOD at random times..even during startup Free x Product WinNt suite TerminalServer SingleUserTS Built by amd fre win sp ldr - Machine Name Kernel base xfffff PsLoadedModuleList xfffff a Debug session time Fri Nov UTC - System Uptime days Loading Kernel Symbols Press ctrl-c cdb kd ntsd or BSOD at random times..even during startup ctrl-break windbg to abort symbol loads that take too long Run sym noisy before reload to track down problems loading symbols Loading User Symbols Mini Kernel Dump does not contain unloaded driver list Bugcheck Analysis Use analyze -v to get detailed debugging information BugCheck fffffa a e Probably caused by AuthenticAMD Followup MachineOwner --------- kd gt analyze -v Bugcheck Analysis WHEA UNCORRECTABLE ERROR A fatal hardware error has occurred Parameter identifies the type of error source that reported the error Parameter holds the address of the WHEA ERROR RECORD structure that describes the error conditon Arguments Arg Machine Check Exception Arg fffffa a e Address of the WHEA ERROR RECORD structure Arg High order -bits of the MCi STATUS value Arg Low order -bits of the MCi STATUS value Debugging Details ------------------ DUMP CLASS DUMP QUALIFIER BUILD VERSION STRING amd fre win sp ldr - DUMP TYPE BUGCHECK P BUGCHECK P fffffa a e BUGCHECK P BUGCHECK P BUGCHECK STR x AuthenticAMD CPU COUNT CPU MHZ dbb CPU VENDOR AuthenticAMD CPU FAMILY CPU MODEL CPU STEPPING CUSTOMER CRASH COUNT DEFAULT BUCKET ID WIN DRIVER FAULT PROCESS NAME System CURRENT IRQL ANALYSIS SESSION HOST ALEX-PC ANALYSIS SESSION TIME - - ANALYSIS VERSION amd fre STACK TEXT fffff a b fffff fcb fffffa a c fffffa nt WheapCreateLiveTriageDump x c fffff a ad fffff ff fffffa a c fffff d fffffa nt WheapCreateTriageDumpFromPreviousSession x fffff a b fffff b fffff dbba fffffa fffffa nt WheapProcessWorkQueueItem x fffff a b fffff d fffff c e fffff b fffffa nt WheapWorkQueueWorkerRoutine x fffff a b fffff b fffffa fffffa b nt ExpWorkerThread x fffff a c fffff c fffff f fffffa fffff f d nt PspSystemThreadStartup x a fffff a c fffff a fffff c fffff nt KxStartSystemThread x STACK COMMAND kb THREAD SHA HASH MOD FUNC cd f f f e e d d e e c a THREAD SHA HASH MOD FUNC OFFSET e dc de ae d dd f b ad ffeb THREAD SHA HASH MOD a e deaace d b c ecc bf FOLLOWUP NAME MachineOwner MODULE NAME AuthenticAMD IMAGE NAME AuthenticAMD DEBUG FLR IMAGE TIMESTAMP FAILURE BUCKET ID X x AuthenticAMD PROCESSOR BUS PRV BUCKET ID X x AuthenticAMD PROCESSOR BUS PRV PRIMARY PROBLEM CLASS X x AuthenticAMD PROCESSOR BUS PRV TARGET TIME - - T Z OSBUILD OSSERVICEPACK SERVICEPACK NUMBER OS REVISION SUITE MASK PRODUCT TYPE OSPLATFORM TYPE x OSNAME Windows OSEDITION Windows WinNt Service Pack TerminalServer SingleUserTS OS LOCALE USER LCID OSBUILD TIMESTAMP - - BUILDDATESTAMP STR - BUILDLAB STR win sp ldr BUILDOSVER STR amd fre win sp ldr - ANALYSIS SESSION ELAPSED TIME ANALYSIS SOURCE KM FAILURE ID HASH STRING km x x authenticamd processor bus prv FAILURE ID HASH c f - - ef - cef-a da Followup MachineOwner Please help ANYONE please I'm in dire need of some techincal support Thank you for your time

http://www.sevenforums.com/bsod-help-support/402477-bsod-random-times-even-during-startup.html
Relevancy 54.61%

Hi there On some days at first boot-up I experience the dreaded BSOD details below and attached I do not know how to tackle this and thought best to approach the experts here So please help Details here Problem Shut down unexpectedly Problem signature Problem Event Name BlueScreen OS BSOD startup (random) f4 BCCode: on Version Locale ID Files that help describe the BSOD BCCode: f4 on startup (random) problem sysdata xml WERInternalMetadata xml View a temporary copy of these files Warning If a virus or other security threat caused the problem opening BSOD BCCode: f4 on startup (random) a copy of the files could harm your computer Extra information about the problem BCCode f BCP BCP FFFFFA BCP FFFFFA BCP FFFFF CF B OS Version Service Pack Product My PC config as below PC Desktop Custom build Windows bit Intel i K stock Asus Sabertooth z Motherboard G Skill Ripjaws Z F - CL Q- GBZH Memory GeForce GTX JETSTREAM MB GDDR Graphics card Sound Card Creative SB X-Fi Titanium HD Driver version Screen Resolution x Native Hard Drives Hitachi HDS ALA - TB INTEL SSDSC CW A - GB - Win OS drive INTEL SSDSC CW A - GB PSU- Thermaltake W Case - CoolerMaster HAF X RC- -KKN Cooling - Thermaltake xtreme water cooling Keyboard - Logitech G USB Keyboard Mouse - Logitech G Laser USB mouse Internet Speed - Mbit ADSL Antivirus - ESET SMART Security Browser - Google Chrome Regards Marz

A:BSOD BCCode: f4 on startup (random)

Additional info below (if required)


Code:
Diagnostic Report (1.9.0027.0):
-----------------------------------------
Windows Validation Data-->

Validation Code: 0
Cached Online Validation Code: 0x0
Windows Product Key: *****-*****-WBBR6-FJB4X-BPQH7
Windows Product Key Hash: aSxDh73Y6wo2Va4KRDumdvjV+d8=
Windows Product ID: 00371-177-1801245-85049
Windows Product ID Type: 5
Windows License Type: Retail
Windows OS version: 6.1.7601.2.00010100.1.0.048
ID: {1B70AE6F-2DDB-457E-9C40-A0B8C4746D1B}(1)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Professional
Architecture: 0x00000009
Build lab: 7601.win7sp1_gdr.130828-1532
TTS Error:
Validation Diagnostic:
Resolution Status: N/A

Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002

Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002

OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002

OGA Data-->
Office Status: 109 N/A
OGA Version: N/A, 0x80070002
Signed By: N/A, hr = 0x80070002
Office Diagnostics: B4D0AA8B-604-645_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

Browser Data-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default Browser: C:\Program Files (x86)\Google\Chrome\Application\chrome.exe
Download signed ActiveX controls: Prompt
Download unsigned ActiveX controls: Disabled
Run ActiveX controls and plug-ins: Allowed
Initialize and script ActiveX controls not marked as safe: Disabled
Allow scripting of Internet Explorer Webbrowser control: Disabled
Active scripting: Allowed
Script ActiveX controls marked as safe for scripting: Allowed

File Scan Data-->

Other data-->
Office Details: <GenuineResults><MachineData><UGUID>{1B70AE6F-2DDB-457E-9C40-A0B8C4746D1B}</UGUID><Version>1.9.0027.0</Version><OS>6.1.7601.2.00010100.1.0.048</OS><Architecture>x64</Architecture><PKey>*****-*****-*****-*****-BPQH7</PKey><PID>00371-177-1801245-85049</PID><PIDType>5</PIDType><SID>S-1-5-21-1665640262-2901874794-525568382</SID><SYSTEM><Manufacturer>System manufacturer</Manufacturer><Model>System Product Name</Model></SYSTEM><BIOS><Manufacturer>American Megatrends Inc.</Manufacturer><Version>2104</Version><SMBIOSVersion major="2" minor="7"/><Date>20130813000000.000000+000</Date></BIOS><HWID>136D3507018400FE</HWID><UserLCID>0409</UserLCID><SystemLCID>0409</SystemLCID><TimeZone>AUS Eastern Standard Time(GMT+10:00)</TimeZone><iJoin>0</iJoin><SBID><stat>3</stat><msppid></msppid><name></name><model></model></SBID><OEM/><GANotification/></MachineData><Software><Office><Result>109</Result><Products/><Applications/></Office></Software></GenuineResults>

Spsys.log Content: 0x80070002

Licensing Data-->
Software licensing service version: 6.1.7601.17514

Name: Windows(R) 7, Professional edition
Description: Windows Operating System - Windows(R) 7, RETAIL channel
Activation ID: e838d943-63ed-4a0b-9fb1-47152908acc9
Application ID: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00371-00170-177-180124-00-1033-7600.0000-0442011
Installation ID: 002815314666207425054846227331498174138242041130305290
Processor Certificate URL: http://go.microsoft.com/fw... Read more

http://www.sevenforums.com/bsod-help-support/310601-bsod-bccode-f4-startup-random.html
Relevancy 54.61%

Hope you guys can help me this issue has been plaguing me for a month now, recently the crashes became less frequent but its starting to happen quite often again. Any help you can offer would be EXTREMELY appreciated.

A:BSOD at random times, often at startup.

Can somebody please help me? This is the third thread I've asked for help and received none At this point all I can do is either contact MS support for $200, take it back to the people who built my PC a few years ago for about the same amount of money, or try to cleanly install Windows 7 (which I have no ****ing clue how to do, don't have OS discs, etc.) PLEASE.

http://www.sevenforums.com/bsod-help-support/360498-bsod-random-times-often-startup.html
Relevancy 54.61%

hello,
got bsod problem on startup. dont know why but it starts. i dont do anything before firt chrash.
in my mother board, i have got 2 modules of 2GD ram in dual chanel. but now one is removed. when there are two modules, there is a problem with bsod.
bsod shovs in safe mode, sometimes in restore system.

thnx for help sry for eng.

http://www.sevenforums.com/bsod-help-support/382438-random-bsod-win7-startup.html
Relevancy 54.61%

Is Windows 7 Home Basic
- x86 (32-bit) or x64 ? x86 (32-bit)
- the original installed OS on the system? Yes
- an OEM or full retail version? It's Full Retail
- OEM = came pre-installed on system
- Full Retail = you purchased it from retailer

- What is the age of system (hardware)? 1 years 8 months.
- What is the age of OS installation (have you re-installed the OS?) I Just re-installed my OS today, 01:00 AM in my time, i post this in 9:30 PM in my time.

Attachment : Attachment 195866

A:Random BSOD, on startup, and standby.

Your system appears to be out of date, please run Windows Updates and install the latest updates including Service Pack 1.

An external device connected to a PS/2 port appears to be the cause, unplug such keyboard/mouse and use USB instead.

Your USB webcam driver is obsolete, find a newer version or remove that driver, it is incompatible with Windows 7

Code:
sncduvc.SYS 0x94bb2000 0x94bb8f80 0x00006f80 0x495894b9 29/12/2008 13:13:29
Update your Broadcom Bluetooth driver
Broadcom.com - Bluetooth Software Download

Run a RAM Test and post back with your results.
RAM - Test with Memtest86+

http://www.sevenforums.com/bsod-help-support/211469-random-bsod-startup-standby.html
Relevancy 54.61%

Hi everyone I'm new to this forum and joined only so I could get help with this god forsaken BSOD that i've been getting for over months I have tried to reinstall windows from a backup I made before the BSOD started and that didn't help I tried to open the dmp files with the windbg tool and didn't get to far cos I'm sort of a nube and don't know how to use it properly All i did was get a quot ntoskrnl exe quot thing as the likely cause so I googled it with no luck Then I also tried looking in the windows event viewer and no luck there either as I'm not sure what I should be looking for it's kind of funny that I know i've had like bsod in day and the event log thinks there were quot critical errors quot I usually get the bsod when I first boot up into Windows then with in like sec or so Sometimes It can take about attempts to just to boot startup, BSOD esp. at during error0x0000004a random into Windows Other times it will happen after the PC has been running for like - hours while browsing the web or even while gaming I have gone days BSOD at random esp. during startup, error0x0000004a without incident and other times I get BSOD in day So I ask you guys for help Thanks in advance Gothm

A:BSOD at random esp. during startup, error0x0000004a

Code:
Microsoft (R) Windows Debugger Version 6.3.9600.16384 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\YUSRA\Downloads\Compressed\GAUTAMSGORAYA-Thu_04_06_2015_103505_81\060415-13400-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.18798.amd64fre.win7sp1_gdr.150316-1654
Machine Name:
Kernel base = 0xfffff800`03416000 PsLoadedModuleList = 0xfffff800`0365b890
Debug session time: Thu Jun 4 06:03:08.648 2015 (UTC + 6:00)
System Uptime: 0 days 0:00:29.444
Loading Kernel Symbols
.

Press ctrl-c (cdb, kd, ntsd) or ctrl-break (windbg) to abort symbol loads that take too long.
Run !sym noisy before .reload to track down problems loading symbols.

..............................................................
................................................................
...........................................................
Loading User Symbols
Loading unloaded module list
....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 4A, {77c0dc4a, 2, 0, fffff880095d1b60}

Probably caused by : ntkrnlmp.exe ( nt!KiSystemServiceExit+245 )

Followup: MachineOwner
---------

5: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

IRQL_GT_ZERO_AT_SYSTEM_SERVICE (4a)
Returning to usermode from a system call at an IRQL > PASSIVE_LEVEL.
Arguments:
Arg1: 0000000077c0dc4a, Address of system function (system call routine)
Arg2: 0000000000000002, Current IRQL
Arg3: 0000000000000000, 0
Arg4: fffff880095d1b60, 0

Debugging Details:
------------------
PROCESS_NAME: vsserv.exe

BUGCHECK_STR: RAISED_IRQL_FAULT

FAULTING_IP:
+32ed210
00000000`77c0dc4a ?? ???

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

CURRENT_IRQL: 2

ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) amd64fre

LAST_CONTROL_TRANSFER: from fffff80003487fe9 to fffff80003488a40

STACK_TEXT:
fffff880`095d1928 fffff800`03487fe9 : 00000000`0000004a 00000000`77c0dc4a 00000000`00000002 00000000`00000000 : nt!KeBugCheckEx
fffff880`095d1930 fffff800`03487f20 : 00000000`00000d60 fffff880`095d1b60 00000000`00000000 fffff800`037726db : nt!KiBugCheckDispatch+0x69
fffff880`095d1a70 00000000`77c0dc4a : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceExit+0x245
00000000`25f4fc48 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x77c0dc4a
STACK_COMMAND: kb

FOLLOWUP_IP:
nt!KiSystemServiceExit+245
fffff800`03487f20 4883ec50 sub rsp,50h

SYMBOL_STACK_INDEX: 2

SYMBOL_NAME: nt!KiSystemServiceExit+245

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: nt

IMAGE_NAME: ntkrnlmp.exe

DEBUG_FLR_IMAGE_TIMESTAMP: 5507a73c

IMAGE_VERSION: 6.1.7601.18798
... Read more

http://www.sevenforums.com/bsod-help-support/371807-bsod-random-esp-during-startup-error0x0000004a.html
Relevancy 54.61%

My computer crashes sometimes when I startup. Debugger seems to say it's ntoskrnl.exe. I've tried elsewhere. Updated drivers. Updated to service pack 2.0. Not sure what could be causing it. I hope someone is able to help.

Any help would be greatly appreciated. I've zipped my minidumps from when the crashes first started.

They are pretty sporadic. So I have no idea what could be causing them.

A:BSOD's on Startup -- Seemingly Random.

5 memory dumps - from 18 May to 18 Jun 2010 (approx 1 month)
4 different STOP errors, with 3 different causes blamed

One of the dump files is blamed (in BlueScreenView) on your Symantec/Norton protection program (symtdi.sys) - so I'd start with that:





Anti-Virus Removal:
Please do the following:
- download a free antivirus for testing purposes: Free AntiVirus
- uninstall the Norton from your system (you can reinstall it, if so desired, when we're done troubleshooting)
- remove any remnants of Norton using this free tool: Download and run the Norton Removal Tool
- IMMEDIATELY install and update the free antivirus
- check to see if this fixes the BSOD's



Beyond that we'll have to look for hardware issues. Please run these free, bootable diagnostics:





H/W Diagnostics:
Please start by running these bootable hardware diagnostics:
Memory Diagnostics (read the details at the link)
HD Diagnostic (read the details at the link)

Also, please run one of these free, independent online malware scans to ensure that your current protection hasn't been compromised: Malware (read the details at the link)



If those tests pass, then try these free stress tests:





Try this free video stress test: FurMark: Graphics Card Stability and Stress Test, OpenGL Benchmark and GPU Temperature | oZone3D.Net





FurMark Setup:
- If you have more than one GPU, select Multi-GPU during setup
- In the Run mode box, select "Stability Test" and "Log GPU Temperature"
Click "Go" to start the test
- Run the test until the GPU temperature maxes out - or until you start having problems (whichever comes first).
- Click "Quit" to exit



Try this free stress test: Free Software - GIMPS





Prime95 Setup:
- extract the contents of the zip file to a location of your choice
- double click on the executable file
- select "Just stress testing"
- select the "Blend" test. If you've already run MemTest overnight you may want to run the "Small FFTs" test instead.
- "Number of torture test threads to run" should equal the number of CPU's times 2 (if you're using hyperthreading).
The easiest way to figure this out is to go to Task Manager...Performance tab - and see the number of boxes under CPU Usage History
Then run the test for 6 to 24 hours - or until you get errors (whichever comes first).
This won't necessarily crash the system - but check the output in the test window for errors.
The Test selection box and the stress.txt file describes what components that the program stresses.







Also, please remove or update these older drivers that were loaded at the time of the crash. Don't use Windows Update or the Update drivers function of Device Manager.
Please use the following instructions to locate the most currently available drivers to replace the one's that you uninstall OR remove:





How To Find Drivers:
- I have listed links to most of the drivers in the code box below. Please use the links there to see what info I've found about those drivers.
- search Google for the name of the driver
- compare the Google results with what's installed on your system to figure out which device/program it belongs to
- visit the web site of the manufacturer of the hardware/program to get the latest drivers (DON'T use Windows Update or the Update driver function of Device Manager).
- if there are difficulties in locating them, post back with questions and someone will try and help you locate the appropriate program.



- - The most common drivers are listed on this page: Driver Reference
- - Driver manufacturer links are on this page: http://www.carrona.org/drvrdown.html

Here's the older drivers. Please pay particular attention to any dated 2008 or earlier (look here for the dri... Read more

http://www.vistax64.com/crashes-debugging/280057-bsods-startup-seemingly-random.html
Relevancy 54.18%

so I recently finished my PC build and have multiple problems. After installing windows 7 it was fine apart from when I turned it on it would restart 2 seconds into boot, but after that it worked fine. Then the next day it BSOD on start up and the mobo would bleep 3 times, 64K Ram problem apparently. I decided to take the graphics card out as nothing was appearing on the screen. This seemed to fix the problem. I ran prime 95 several times and everything was fine. But now it's BSOD randomly. A Friend has tested the GPU on his PC and says it works fine.

Intel i5 2500k sandybridge
Asus P8Z68-V
Corsair Dominator 8Gb (2x4) 1866MHz Dual Channel
Nvidia GT 240
Samsung Spinpoint F3 1TB
Coolermaster GX750 Bronze

Windows 7 Professional 64bit

Thanks in advance for any help

A:BSOD on Startup and seemingly random occassions

  
Quote: Originally Posted by Delronimo


so I recently finished my PC build and have multiple problems. After installing windows 7 it was fine apart from when I turned it on it would restart 2 seconds into boot, but after that it worked fine. Then the next day it BSOD on start up and the mobo would bleep 3 times, 64K Ram problem apparently. I decided to take the graphics card out as nothing was appearing on the screen. This seemed to fix the problem. I ran prime 95 several times and everything was fine. But now it's BSOD randomly. A Friend has tested the GPU on his PC and says it works fine.

Intel i5 2500k sandybridge
Asus P8Z68-V
Corsair Dominator 8Gb (2x4) 1866MHz Dual Channel
Nvidia GT 240
Samsung Spinpoint F3 1TB
Coolermaster GX750 Bronze

Windows 7 Professional 64bit

Thanks in advance for any help


To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:

* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.
To ensure minidumps are enabled:

Go to Start, in the Search Box type: sysdm.cpl, press Enter.
Under the Advanced tab, click on the Startup and Recovery Settings... button.
Ensure that Automatically restart is unchecked.
Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
OK your way out.
Reboot if changes have been made.

http://www.sevenforums.com/bsod-help-support/184762-bsod-startup-seemingly-random-occassions.html
Relevancy 54.18%

Hey guys I'll start at the beginning I recently switched out my graphics card and replaced it with a startup BSOD on mode) Random safe (even nd hand GTX I should note i and the previous owner have used the card Random BSOD on startup (even safe mode) without issues for a fairly long period of time It was only problems with my monitor loosing signal while playing Modern Warfare and i think driver crashes that caused me to look deeper and has led to a range of problems I'm not sure if they were there before but they have only recently come to Random BSOD on startup (even safe mode) surface The machine then started to do weird things in games which I traced back to drivers with the Event Log So I finally got around to formatting my PC and starting fresh with drivers and new hardware Since then i have been having random BSOD errors on startup Sometimes i boot and run fine sometimes i cant get past the Random BSOD on startup (even safe mode) Windows loading screen with crashing and other times it will load windows then crash after - secs Instantly i thought that it was a GPU problem so i switched it out with a spare GT i have and the same thing continues to happen Sometimes the PC will BSOD before or just after windows startup and other-times i can boot up fine and never notice anything was wrong If the machine does crash with a BSOD it will continually loop Crashing then restart then load up and BSOD again ect ect If i turn the whole PC off at the PSU then it has its normal quot chance quot of loading normally Trying to boot into Safe mode doesn't seem to help it simply changes the BSOD error If i try to boot normally into windows i get one of two BSOD messages If i try to boot into safe mode i usually get this message Sometimes randomly i get the message on startup briefly before it crashes I am not that those errors only occur in those circumstances but that seems to be what i have noticed I have tried the following fixes - All current windows updates - Boot into Memtest and run overnight no errors recorded - Stress tested CPU with Linpack and Prime - Removed all overclocks and reset BIOS - Updated to latest BIOS version - Stress tested GPU with Furmark nothing wrong after over hours - Running the GPU with the previous driver versions and the current Beta - Running the GPU with default Windows Drivers The only thought i have had could it possibley be a problem with the GPU seating i have tested it but at the moment the Motherboard is lying flat and the GPU is not attached to anything Im seriously stumped Any help is really appreciated Thankyou

A:Random BSOD on startup (even safe mode)

18 memory dumps from 02 Mar 10 to 06 Mar 10
1 STOP 0xA - More info about this error here: BSOD Index
2 STOP 0x19 - More info about this error here: BSOD Index
4 STOP 0x1E - More info about this error here: BSOD Index
8 STOP 0x3B - More info about this error here: BSOD Index
3 STOP 0x7E - More info about this error here: BSOD Index
6 of them blame ntkrnlmp.exe; 2 blame Pool_Corruption; 4 blame memory_corruption; 1 blames NETIO.SYS; 3 blame ndis.sys; 1 blames ctaud2k.sys; 1 blames AgileVpn.sys

It's most likely this is a hardware issue. Since you've run MemTest and Furmark, that would seem to rule out the memory and the video card. As such, I'd try this free diagnostic: HD Diagnostic (read the details at the link)

Also, please run one of these free, independent online malware scans to ensure that your current protection hasn't been compromised: Malware (read the details at the link)

Then, try this free stress test:





Quote:
Link: Free Software - GIMPS





Quote:
Prime95 Setup:
- extract the contents of the zip file to a location of your choice
- double click on the executable file
- select "Just stress testing"
- select the "Blend" test. If you've already run MemTest overnight you may want to run the "Small FFTs" test instead.
- "Number of torture test threads to run" should equal the number of CPU's times 2 (if you're using hyperthreading).
The easiest way to figure this out is to go to Task Manager...Performance tab - and see the number of boxes under CPU Usage History
Then run the test for 6 to 24 hours - or until you get errors (whichever comes first).
The Test selection box and the stress.txt file describes what components that the program stresses.





Summary of the BSOD's:

Code:
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Mon Mar 1 18:25:43.805 2010 (GMT-5)
System Uptime: 0 days 0:00:26.852
BugCheck 1E, {ffffffffc0000005, fffff88003360030, 0, 0}
Probably caused by : ntkrnlmp.exe ( nt!KipFatalFilter+1b )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
*** WARNING: Unable to verify timestamp for yk62x64.sys
*** ERROR: Module load completed but symbols could not be loaded for yk62x64.sys
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Mon Mar 1 18:27:47.743 2010 (GMT-5)
System Uptime: 0 days 0:00:17.774
BugCheck 3B, {c0000005, fffff80002c90b0c, fffff88009917f30, 0}
Probably caused by : ntkrnlmp.exe ( nt!IoAcquireRemoveLockEx+24 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: RazerTray.exe
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Tue Mar 2 07:59:49.937 2010 (GMT-5)
System Uptime: 0 days 0:00:10.968
BugCheck 19, {3, fffffa80054664a0, fffffa80054664a0, fdfffa80054664a0}
Probably caused by : Pool_Corruption ( nt!ExFreePool+780 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Tue Mar 2 23:40:22.711 2010 (GMT-5)
System Uptime: 0 days 0:00:20.743
BugCheck 3B, {c0000005, fffff80002fa6fb9, fffff88008ec7df0, 0}
Probably caused by : ntkrnlmp.exe ( nt!ObpQueryNameString+51 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: CTxfispi.exe
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Tue Mar 2 23:46:59.071 2010 (GMT-5)
System Uptime: 0 days 0:00:17.102
BugCheck 1E, {ffffffffc0000005, fffff88008de3080, 0, 0}
*** WARNING: Unable to verify timestamp for yk62x64.sys
*** ERROR: Module load completed but symbols could not be loaded for yk62x64.sys
Probably caused by : NETIO.S... Read more

http://www.sevenforums.com/bsod-help-support/68890-random-bsod-startup-even-safe-mode.html
Relevancy 54.18%

Hi every one. I bulit this pc and i am having a lot of BSOD. Can any one help. I only have to dmp files right now. I tried clean installs and other things too try to fix it.

ANY HELP WOULD BE GREAT THANK YOU!!!!

A:PLZ Help NEW PC BSOD! at random times startup idling ...

Welcome aboard.
----------------------------------
First dump ► STOP 0x00000109: CRITICAL_STRUCTURE_CORRUPTION
Usual causes: Device driver, Breakpoint set with no debugger attached, Hardware (Memory in particular)
----------------------------------
Second Dump ► STOP 0x000000D1: DRIVER_IRQL_NOT_LESS_OR_EQUAL
Usual causes: Device driver
----------------------------------
(Source: Carrona.org)
----------------------------------

So, one thing is common in both of those, they usually cause by a device driver.
But, your crash dumps are not showing any device driver as the probable cause. In such a situation, it is better to enable Driver Verifier to monitor the drivers.

Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

Let us know the results, with the subsequent crash dumps, if any.

http://www.sevenforums.com/bsod-help-support/260034-plz-help-new-pc-bsod-random-times-startup-idling.html
Relevancy 54.18%

System:
Hp Pavilion dv4 Notebook

Processor: AMD Turion II Dual-Core Mobile M520 2.30 Gz
RAM: 4.00 GB

System Time: Windows 7 64 Bit.

The computer is only about a year and a half old. Has always worked great and now I get random BSODs. Even after restoring it to factory systems three times, I still get random BSODs. And I can never recreate how it happens. Sometimes it won't happen for a whole day, sometimes it will happen every other minute. Downloaded BlueScreen viewer and it gives me a bunch of information. Will upload that.

A:BSOD at very random times. Never at startup, always different conds.

No DMP's included above.
We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

If you are overclocking STOP

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.


To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

http://www.sevenforums.com/bsod-help-support/220229-bsod-very-random-times-never-startup-always-different-conds.html
Relevancy 54.18%

Hi,

This is my first time here, so please be gentle.

I will usually get the BSOD after 10 minutes of logging in on normal startup mode. However, if I am on Safe Mode, I won't receive it. I have done a memory test using windows memory tester and a chkdsk /f. The mem test did not find anything and the chkdsk only found a couple of bad clusters and reassigned them. Doing a WINDBG on the memory.dmp file I get this:

Probably caused by : ntkrnlmp.exe ( nt!KeStackAttachProcess+115 )

I have included the SF file for review. Any assistance to ascertain the culprit would be greatly appreciated.

Thank you,

John

A:BSOD random when in normal startup mode

I just noticed some of the entries in the host file. Could sites like Roblox or Minecraft add those...questionable...entries?

Thanks

John

http://www.sevenforums.com/bsod-help-support/290843-bsod-random-when-normal-startup-mode.html
Relevancy 54.18%

Newbie here I usually just looking at the forum to solve Crashes during BSOD + Random Windows startup my pc problems or my friends' I considered myself as someone who at least know generally what to do to fix pc problems But for this case I give up and hope the good folks here could give me some clues There are major issues here BSOD during Windows Startup The problem So after the loading screen loads up for some time where you see the windows logo it will BSOD during Windows startup + Random Crashes then go straight to BSOD This happens in random occurrence and happens like of the time Sometimes it won't go to windows at all just keep on restarting for like hours The error message is x quot A clock interrupt was not received on a secondary processor quot Some of the monitoring tools like hwmonitor sometimes also caused the same BSOD I think all the minidump files come from this error My solution What I usually do is either let it reboot and pray that it goes through to windows or I go through safe mode uninstall the NVIDIA driver using Display Driver Uninstaller reboot to normal windows it always reboot when the display driver is uninstalled re-install the display driver and reboot The nd method usually has increased chance of successfully going in to windows Possible root BSOD during Windows startup + Random Crashes cause - something wrong with GPU bad copy although I have used it around couple of months without problems whatsoever - old PSU unstable - old processor Possibly dismissed root cause - This first happened when I started to try windows thought that OS is the problem then I move back to windows Unfortunately the problem still persists - I played around with flashing the bios of SLI mobo version to my non-SLI mobo Have successfully re-flashed it back to the latest version of non-SLI Problem still persists - There was time that disabling HT feature makes the error go away but it doesn't really affect anything now Possibly placebo effect - Have tried changing the TdrDelay to secs Doesn't help Random Crashes The problem During normal usage there are times that the pc just freeze either with the loop sound like 'errrrr' or just freeze This happens randomly either when I had only used the PC for mere hour or even doesn't even showed up after my streak of gaming along the weekend So no temperature issues as just last weekend I managed to play all day Only restart the PC once or twice when the PC was sluggish of course reboot means facing the st problem A rare occurrence will be the pc automatically reboot itself My solution Hard restart Possible root cause - For me to be able to use all the DIMM slots and run stable I have to bump the vcore to V I've read that this is a common issue in X based chipset There are possibilities that this stability issue still causing random freeze I used different memory brand btw - Something to do with problem - again unstable PSU - again old processor - fail HD Test done early September - tried to run windows memory diagnostic with the same current configuration problems above no error found - tried prime in occasions small FFT for - hours blend for hours nothing happened - Tried furmark overnight to see if GPU faulty nothing Appreciate if anyone have some clues of what broken here and if possible to fix I plan to upgrade to X in near future however would like to keep the GPU if possible and sell the rest to nd hand market so it won't sit in my house useless too many old PC already However can't do the plan if there are still some issues with it

A:BSOD during Windows startup + Random Crashes

Hello and welcome XBABA mate am no expert and only see obvious bugcheck stuff and I cannot find anything that sticks out to me. But just for my curiosity this is your machine you are talking about ? If so and you can slip into safe mode run these if you haven't already

http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html

http://www.sevenforums.com/tutorials/433-disk-check.html < use the /f and /r options in Option2 if necessary
Then have read of my ditty here

UsingHW Info PSU

Download HW Info and pick the right bit version - HWiNFO, HWiNFO32/64 -Download - (or copy andpaste this site into the search bar) If you do not need the running informationin the smaller right hand panel close it. In the left hand window click on the+ for the individual device groupings and they will open out to the variouscomponents.

Go on opening out further until you get to the device itself. click on it and itwill highlight. In the right hand window there will be a very detailed descriptionof that device as in brand, speeds model number etc etc These are very detailedand are just what is needed for searching for drivers etc.

To get the PSU volts you need to select the Sensor button circled in yellow inthe pic for PSU testing do the same and scroll down the readout as in my pic towhere it has Nuvoton = yours might be a different section name / title. Postback apic of that please.

If you want a more definitive test see this http://www.sevenforums.com/tutorials/301799-psu-test-dc-output-voltage.html but pleaseonly use a digital multimeter and not an analogue as they inject typically 9vinto a circuit to test and into a 3.3v or 5v rail - not a good idea!!see thepartial pic of the correct sort of meter in that tutorial. details if youscroll down that listing.

Now a good reference article is this
Voltage Rails - Power Supply 101: AReference Of Specifications it will explain in detail what thevoltages are and functions of the PSU

The section for the PSU rails has the reference for Vbatt - my pic shows my Ivy bridge Asus board and the section is titled Nuvoton.
I am only suggesting you look at the PSU rails as a matter of elimination because sometimes it can be the simplest thing and one components often overlooked is the PSU.

http://www.sevenforums.com/bsod-help-support/349623-bsod-during-windows-startup-random-crashes.html
Relevancy 54.18%

Computer keeps throwing a BSOD shortly after the boot process. I make it to windows with enough time to launch chrome or another program and then the crash happens. I restored windows and it started happening a little less.

I ran a "whocrashed" program that identified something with atheros driver, but when I try to update it windows says it is the most up to date driver.

I have attached the dump/system files to where you can hopefully help.

Thanks in advance.

A:BSOD shortly after startup or during random intervals

STOP 0x0000000A: IRQL_NOT_LESS_OR_EQUAL BSOD Index

Usual causes: Kernel mode driver, System Service, BIOS, Windows, Virus scanner, Backup tool, compatibility.

STOP 0x0000007E: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED BSOD Index

Usual causes: Insufficient disk space, Device driver, Video card, BIOS, Breakpoint with no debugger attached, Hardware incompatibility, Faulty system service, Memory, 3rd party remote control.

*IF you are overclocking any hardware, please revert to factory clocks.
*Can you tell me what antivirus you're using?
*If you're using any back up tool, suggest to uninstall it while we troubleshoot with your computer.

Suggestions:
* System file checker for repairing any damaged files within windows
SFC /SCANNOW Command - System File Checker

* Run Memory test for 8 passes preferably overnight.
RAM - Test with Memtest86+

* To make sure your hard drive is good run
Disk Check

* Hard drive test both short and long with
SeaTools for Windows

SeaTools for DOS

* Look for an update on your BIOS version

Code:
BIOS Version/Date American Megatrends Inc. E1482IMS V.10B, 4/8/2011
Post back results

http://www.sevenforums.com/bsod-help-support/253627-bsod-shortly-after-startup-during-random-intervals.html
Relevancy 54.18%

Hi I've been getting BSOD for months now and I feel that my computer is yelling at me to stop procrastinating and get it some help before it's too late When do the BSOD appear I could be just surfing the net I'm guilty of having tabs startup random times freezing at BSOD and open BSOD random times and freezing at startup during every session ducks just in case someone tries to hit me It also happens when watching Netflix through my browser again with the tabs open Or it happens when I boot up my computer just moments after the desktop appears About a month ago it frequently happened after clicking quot shut down quot It happened so often that I would just press down on the power button instead of going through windows What happens after rebooting Sometimes it reboots just fine and I can go back to whatever I was doing Other times when I get back to the desktop everything freezes Then I force restart and when it's rebooting I get a BSOD The freezing at startup also happens when the computer was properly shut down What does the BSOD say So I keep getting two but I don't know if it's okay to discuss both in one post I'll mention them both and if only one can be discussed then please ignore the second one STOP x F x x x F XFFFFF It usually just says this but yesterday the following was included win k sys -Address FFFFF DC C base at FFFFF DateStanp ff IRQL NOT LESS OR EQUAL stop x A Other info I'm the only one who uses this computer There is only one account Edit to add issue that might be related shrugs In the past few months I've received error messages regarding an unknown device Sorry I don't have the actual message but it is related to ieee In device manager under USB controllers there is an exclamation mark next to quot unknown device quot

A:BSOD random times and freezing at startup

Did I forget to add some details? I believe I followed the directions and added the correct file.

Anyway, I got two new BSOD today. Last night, I shut down my computer normally. When I started my computer today, I got a BSOD before it even got to the welcome screen.
It says BAD_POOL_HEADER stop: 0x00000019 I've attached a picture for the full message.

I restarted the computer and it booted to the desktop but then froze. I restarted again but it froze on the welcome screen. So I restarted one more time and I got a BSOD before it even got the desktop. It said: DRIVER_IRQL_NOT_LESS_OR_EQUAL stop: 0x0000000D1 Also attached a picture.

I restarted yet another time and this time it gave me an option to repair. I selected that and then I left the room. When I got back, it was on the desktop and here I am now. I would really appreciate some help with this.

http://www.sevenforums.com/bsod-help-support/373485-bsod-random-times-freezing-startup.html
Relevancy 54.18%

Recently, my computer has started freezing up more often, sometimes it gives out a 'dragged-out' sound before dying(in typical BSoD's) and sometimes it doesn't. Seldom do I get a BSoD file/problem alert from it if it freezes up.

The freezing up/BSoD may happen anytime, sometimes right after start-up, while playing games(league of legends), or just surfing the web.

In addition, sometimes, when I start-up, my computer fails to detect the graphic card, and I need to plug the video cable from my graphics card to the motherboard to see the screen.

Do kindly tell if you need any other information.

A:Random BSOD while doing nothing, after startup, playing games

Bug check 116, go through STOP 0x116: VIDEO_TDR_ERROR troubleshooting

Did you try another graphics card on the computer and seen if it crashes? Does the motherboard have on-board VGA slot? How does it work if connected there?


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 116, {fffffa8005ff41b0, fffff88013bca630, ffffffffc000009a, 4}

Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

VIDEO_TDR_FAILURE (116)
Attempt to reset the display driver and recover from timeout failed.
Arguments:
Arg1: fffffa8005ff41b0, Optional pointer to internal TDR recovery context (TDR_RECOVERY_CONTEXT).
Arg2: fffff88013bca630, The pointer into responsible device driver module (e.g. owner tag).
Arg3: ffffffffc000009a, Optional error code (NTSTATUS) of the last failed operation.
Arg4: 0000000000000004, Optional internal context dependent data.

Debugging Details:
------------------
FAULTING_IP:
+0
fffff880`13bca630 ?? ???

DEFAULT_BUCKET_ID: GRAPHICS_DRIVER_TDR_FAULT

CUSTOMER_CRASH_COUNT: 1

BUGCHECK_STR: 0x116

PROCESS_NAME: System

CURRENT_IRQL: 0

STACK_TEXT:
fffff880`009a9c10 fffff800`0357ae5a : fffffa80`039cf300 00000000`00000080 fffffa80`039cf890 fffff800`032d4d19 : nt!MmZeroPageThread+0x5e0
fffff880`009a9d40 fffff800`032d4d26 : fffff800`03456e80 fffffa80`039cf300 fffff800`03464cc0 00000000`00000000 : nt!PspSystemThreadStartup+0x5a
fffff880`009a9d80 00000000`00000000 : fffff880`009aa000 fffff880`009a4000 fffff880`009a7700 00000000`00000000 : nt!KiStartSystemThread+0x16
STACK_COMMAND: kb

SYMBOL_NAME: ANALYSIS_INCONCLUSIVE

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: Unknown_Module

IMAGE_NAME: Unknown_Image

DEBUG_FLR_IMAGE_TIMESTAMP: 0

FAILURE_BUCKET_ID: X64_0x116_ANALYSIS_INCONCLUSIVE

BUCKET_ID: X64_0x116_ANALYSIS_INCONCLUSIVE

Followup: MachineOwner
---------

http://www.sevenforums.com/bsod-help-support/261239-random-bsod-while-doing-nothing-after-startup-playing-games.html
Relevancy 54.18%

Hi.

I have BSOD several times and have not find any reason for it with my knowledge, so i hope that you can see what's wrong with my computer.

Have run the Collector, and have attatch the zipfile.

I have also run the SF_Diagnostic as well, but that crashed on my compter but the Collector worked perfekt

Hoping for some help
Regards
P?r

A:BSOD that apperes suddenly or at startup or just random

Hi khvorsteh20 & Welcome to the forums ^_^,

I have analysed your dump files and below has been provided an analysis for informative purposes :-

Code:
**************************Fri Oct 17 11:59:11.954 2014 (UTC + 5:30)**************************
Loading Dump File [C:\SysnativeBSODApps\101714-6250-01.dmp]

*** WARNING: Unable to verify timestamp for ntoskrnl.exe

*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe

Windows 8 Kernel Version 9600 MP (4 procs) Free x64

Built by: 9600.17328.amd64fre.winblue_r3.140827-1500

System Uptime: 0 days 19:38:24.951

*** WARNING: Unable to verify timestamp for ntoskrnl.exe

*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe

*** WARNING: Unable to verify timestamp for igdkmd64.sys

*** ERROR: Module load completed but symbols could not be loaded for igdkmd64.sys

Probably caused by : igdkmd64.sys ( igdkmd64+1b41fa )

BugCheck 3B, {c0000094, fffff8016a9f21fa, ffffd00020ad5cc0, 0}
BugCheck Info: SYSTEM_SERVICE_EXCEPTION (3b)

Arguments:
Arg1: 00000000c0000094, Exception code that caused the bugcheck
Arg2: fffff8016a9f21fa, Address of the instruction which caused the bugcheck
Arg3: ffffd00020ad5cc0, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.
BUGCHECK_STR: 0x3B

DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

FAILURE_BUCKET_ID: WRONG_SYMBOLS

CPUID: "Intel(R) Core(TM) i7-4600U CPU @ 2.10GHz"

MaxSpeed: 2100

CurrentSpeed: 2694


Processor may be overclocked!
Expected Frequency: 2100
Actual Frequency: 2694
Overclock Ratio: 1.28286

BIOS Version A08

BIOS Release Date 02/18/2014

Manufacturer Dell Inc.

Product Name Latitude E7440

??????????????????????????????????????????????????????????????????????????????????????``
**************************Thu Oct 16 15:54:40.873 2014 (UTC + 5:30)**************************
Loading Dump File [C:\SysnativeBSODApps\101614-6984-01.dmp]

*** WARNING: Unable to verify timestamp for ntoskrnl.exe

*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe

Windows 8 Kernel Version 9600 MP (4 procs) Free x64

Built by: 9600.17328.amd64fre.winblue_r3.140827-1500

System Uptime: 0 days 3:38:49.707

*** WARNING: Unable to verify timestamp for ntoskrnl.exe

*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe

Probably caused by : ntoskrnl.exe ( nt+75f87 )

BugCheck A, {c12c000108, 2, 0, fffff8019a28ef87}
BugCheck Info: IRQL_NOT_LESS_OR_EQUAL (a)

Arguments:
Arg1: 000000c12c000108, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff8019a28ef87, address which referenced memory
BUGCHECK_STR: AV

DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

FAILURE_BUCKET_ID: WRONG_SYMBOLS

CPUID: "Intel(R) Core(TM) i7-4600U CPU @ 2.10GHz"

MaxSpeed: 2100

CurrentSpeed: 2694


Processor may be overclocked!
Expected Frequency: 2100
Actual Frequency: 2694
Overclock Ratio: 1.28286

BIOS Version A08

BIOS Release Date 02/18/2014

Manufacturer Dell Inc.

Product Name Latitude E7440

??????????????????????????????????????????????????????????????????????????????????????``
**************************Wed Oct 15 01:32:30.975 2014 (UTC + 5:30)**************************
Loading Dump File [C:\SysnativeBSODApps\101514-7343-01.dmp]

Windows 8 Kernel Version 9600 MP (4 procs) Free x64

Built by: 9600.17238.amd64fre.winblue_gdr.140723-2018

System Uptime: 1 days 11:39:27.472

*** WARNING: Unable to verify timestamp for igdkmd64.sys

*** ERROR: Module load completed but symbol... Read more

http://www.eightforums.com/bsod-crashes-debugging/55618-bsod-apperes-suddenly-startup-just-random.html
Relevancy 54.18%

Hi!
Im having blue screens while starting my computer, also having unexpected shutdowns and restarts.
Can someone enlight me on what to do? I uploaded de zip file with the diagnoses

Thanks!!

A:Random BSOD and shutdowns on startup / ASUS

Code:
NETwNs64.sys Mon May 2 03:33:01 2011
Driver Reference Table - NETwNs64.sys


Code:
AiCharger.sys Fri Feb 25 15:41:45 2011
Known to cause problems on windows 7, please uninstall this software with revo uninstaller.

Revo Uninstaller

Download and install Revo Uninstaller free from here: Download Revo Uninstaller Freeware - Free and Full Download - Uninstall software, remove programs, solve uninstall problems

Opt for "Advanced Mode" and uninstall the software (also delete the leftover registry entries).

Please update PowerISO to its latest version available.

Code:
SCDEmu.SYS Tue Aug 7 21:19:48 2007
Driver Reference Table - SCDEmu.SYS

Start up

Keep less stuff at the start-up. Only anti-virus, this helps avoid driver conflicts and improves time to log in to windows.
Troubleshoot a Problem by Performing a Clean Startup in Windows 7 or Vista
How to Change, Add, or Remove Startup Programs in Windows 7

Memtest86+

Run Memtest86+ for at least 8-10 passes. It may take up to 20 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold. How to Test and Diagnose RAM Issues with Memtest86+



   Note
Pay close attention to part 3 of the tutorial in order to rule the faulty RAM stick out.



   Tip
Do this test overnight.


SFC /scannow to check windows for corruption:
How to Repair Windows 7 System Files with System File Checker
1. Click Start
2. In the search box, type Command Prompt
3. In the list that appears, right-click on cmd.exe and choose Run as administrator
4. In the command window that opens, type sfc /scannow

http://www.sevenforums.com/bsod-help-support/292328-random-bsod-shutdowns-startup-asus.html
Relevancy 54.18%

I don't know how it happens, no errors but plz help me! And i have a Acer Aspire X3470. My PC beeps too.

Thx in Advance

-Dylan

A:Random BSOD or freeze, and beeps on startup

No dumpfilesincluded.

Please couldyou post your dumpfiles according to these instructions here http://www.eightforums.com/bsod-crashes-debugging/10685-blue-screen-death-bsod-posting-instructions.html .
Please use option one and use Grab all.

http://www.eightforums.com/bsod-crashes-debugging/44921-random-bsod-freeze-beeps-startup.html
Relevancy 54.18%

For the last few months I have been having strange stop errors First they only appeared a few minutes after I started my computer for the first time that day with many different error codes After a couple of months of trying different solutions testing my RAM installing drivers flashing BIOS etc I figured it might startup at BSoD Random and messages randomly be one of my hard drives acting up and I removed my oldest couple Since then my computer has been Random BSoD messages at startup and randomly working fine but today I had two BSODs in a row with quot The video memory manager has encountered a fatal error quot Random BSoD messages at startup and randomly and quot fltmgr sys quot Some other random error codes I ve encountered Memory management Page fault in non paged area Bad pool caller Driver irql not less than or equal Also most of the times my BSOD error dump stops at and claims to be completed but I don t receive a minidump file like when it reaches Sometimes it keeps retrying and stopping at Operating System Windows Ultimate -bit SP CPU AMD FX- C Zambezi nm Technology RAM GB Dual-Channel DDR MHz - - - Motherboard Gigabyte Technology Co Ltd A-UD CPU C Graphics BenQ G HD x Hz MB ATI AMD Radeon HD Series XFX Pine Group C Hard Drives GB M -CT M SSD ATA Device SSD GB Western Digital WDC WD FAEX- Z A ATA Device SATA C GB Western Digital WDC WD AADS- S B ATA Device SATA C Optical Drives DTSOFT Virtual CdRom Device TSSTcorp CDDVDW SH- BB ATA Device Audio AMD High Definition Audio Device I m attaching my dump files from since a few months ago nbsp

A:Random BSoD messages at startup and randomly

Looks like you still have a hard drive issue, but it is the boot drive
 

http://www.techspot.com/community/topics/random-bsod-messages-at-startup-and-randomly.207851/
Relevancy 54.18%

First time poster I am running Windows Professional x I am at a lost what to do I have included a screenshot of the error and all the necessary information needed from your sticky What I have tried to do to fix this problem - Switched my bootcat cache with my laptop OS which is the same - Tried startup, Random Process1_init.._Failed BSOD running virus malware scans which came up clean using BSOD Random startup, Process1_init.._Failed MicSE and MalwareBytes - Tried running in safe mode which still blue screens - Tried updating all my drivers while using my laptops bootcat chace file to boot - Tried taking out and re putting my RAM Graphics Card Hard drive BSOD Random startup, Process1_init.._Failed included dusting What was solved - I can successfully boot my PC if I use my laptops bootcat chace but upon restarting or shutting of the PC it just bluescreens with the same error again Its the only way I can boot my PC now is by constantly switching the bootcat chace The latest thing I would have installed just before the blue screen would of been BSOD Random startup, Process1_init.._Failed Cursed Client World of Warcraft addon manager and World of Warcraft It seems the only possible way I can make this PC work now is if I use my Win Repair CD and copy my bootcat cache off my external which is from my laptop to my current bootcat cache Doing this every single time I boot up the PC can get annoying Any help is much appreciated

A:BSOD Random startup, Process1_init.._Failed

Welcome to the forum,

There aren't any dump files in your upload, can you make sure it is set to create them, #6 of this tutorial,

Dump Files - Configure Windows to Create on BSOD

Filling in your system specs will help also,

System Info - See Your System Specs

http://www.sevenforums.com/bsod-help-support/245445-bsod-random-startup-process1_init-_failed.html
Relevancy 54.18%

Just started getting the BSOD on a 1 year old Dell laptop. It is completely random only happening occasionally. If the startup is successful I can use the pc for as long as I want with no problems. I ran a hard disk check that came back with no issues so I'm wondering if it is a driver or software issue. Occasionally the top of the BSOD states, "IRQL not less or equal" also.

I have attached the requested zip files that I created as per the forum instructions. If anything else is needed please let me know. Thanks in advance.

A:Random BSOD on startup, error 0x0000001e

Welcome aboard.

It is caused by the storage driver.

Code:
fffff880`03237218 fffff880`0127434eUnable to load image \SystemRoot\system32\DRIVERS\iaStor.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for iaStor.sys
*** ERROR: Module load completed but symbols could not be loaded for iaStor.sys
iaStor+0x5034e
lmvm iastor
start end module name
fffff880`01224000 fffff880`015c6000 iaStor T (no symbols)
Loaded symbol image file: iaStor.sys
Image path: \SystemRoot\system32\DRIVERS\iaStor.sys
Image name: iaStor.sys
Timestamp: Fri May 20 22:22:24 2011 (4DD69C48)
CheckSum: 0008CA08
ImageSize: 003A2000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Get it from http://downloadcenter.intel.com/Sear...ntel+RST%29%22.

http://www.sevenforums.com/bsod-help-support/261048-random-bsod-startup-error-0x0000001e.html
Relevancy 53.75%

Hi All,

First time poster and hope somebody can help.

Have been getting BSOD for a few days now. All at random times, while using the internet, watching movies or just playing music.

Have even formatted but of no use.

Most recent BSOD was MEMORY MANAGEMENT but its different all the time.

A:Random BSOD messages, happens at random times while using computer

Welcome.

Could you configure the system to collect small memory dumps.Dump Files - Configure Windows to Create on BSOD

http://www.sevenforums.com/bsod-help-support/335776-random-bsod-messages-happens-random-times-while-using-computer.html
Relevancy 53.75%

System Information local -------------------------------------------------------------------------------- computer name UNKKA-PC windows version Windows Service Pack build windows dir C Windows Hardware ASUSTeK Computer INC M A TD USB CPU ntfs.sys (Ntfs+0x5A88) BSOD AuthenticAMD AMD Phenom tm II X T Processor AMD level logical BSOD ntfs.sys (Ntfs+0x5A88) processors active mask RAM total -------------------------------------------------------------------------------- Crash Dump Analysis -------------------------------------------------------------------------------- Crash dump directory C Windows Minidump Crash dumps are enabled on your computer On Tue GMT your computer crashed crash dump file C Windows Minidump - - dmp This was probably caused by the following module ntfs sys Ntfs x A Bugcheck code x x FB xFFFFF xFFFFF FAE xFFFFF ECF D Error NTFS FILE SYSTEM file BSOD ntfs.sys (Ntfs+0x5A88) path C Windows system drivers ntfs sys product Microsoft Windows BSOD ntfs.sys (Ntfs+0x5A88) -k ytt j rjestelm company Microsoft Corporation description NT File System Driver Bug check description This indicates a problem occurred in the NTFS file system The crash took place in a standard Microsoft module Your system configuration may be incorrect Possibly this problem is caused by another driver on your system that cannot be identified at this time On Tue GMT your computer crashed crash dump file C Windows memory dmp This was probably caused by the following module ntfs sys Ntfs x A Bugcheck code x x FB xFFFFF xFFFFF FAE xFFFFF ECF D Error NTFS FILE SYSTEM file path C Windows system drivers ntfs sys product Microsoft Windows -k ytt j rjestelm company Microsoft Corporation description NT File System Driver Bug check description This indicates a problem occurred in the NTFS file system The crash took place in a standard Microsoft module Your system configuration may be incorrect Possibly this problem is caused by another driver on your system that cannot be identified at this time

A:BSOD ntfs.sys (Ntfs+0x5A88)

It's hard to read the root cause from this minidump, but the driver here appears to be one of Avast's binaries (aswSP.sys):


Code:
2: kd> !thread
GetPointerFromAddress: unable to read from fffff80002f00000
THREAD fffffa8005110b60 Cid 0004.01a0 Teb: 0000000000000000 Win32Thread: 0000000000000000 RUNNING on processor 2
IRP List:
Unable to read nt!_IRP @ fffffa800745f750
Not impersonating
GetUlongFromAddress: unable to read from fffff80002e3dba4
Owning Process fffffa8003b55040 Image: System
Attached Process N/A Image: N/A
fffff78000000000: Unable to get shared data
Wait Start TickCount 3420420
Context Switch Count 20003 IdealProcessor: 2
ReadMemory error: Cannot get nt!KeMaximumIncrement value.
UserTime 00:00:00.000
KernelTime 00:00:00.000
Win32 Start Address aswSP (0xfffff88004574e6c)
Stack Init fffff88003ba1db0 Current fffff88003ba17e0
Base fffff88003ba2000 Limit fffff88003b9c000 Call 0
Priority 8 BasePriority 8 UnusualBoost 0 ForegroundBoost 0 IoPriority 2 PagePriority 5
Child-SP RetAddr : Args to Child : Call Site
fffff880`03b9ffc8 fffff880`0124fa88 : 00000000`00000024 00000000`001904fb fffff880`03ba0fa8 fffff880`03ba0800 : nt!KeBugCheckEx
fffff880`03b9ffd0 fffff880`0133e3e7 : fffff880`0129a7dc fffff880`03ba1370 fffff880`03ba1370 00000000`00000000 : Ntfs! ?? ::FNODOBFM::`string'+0x2b49
fffff880`03ba0010 fffff800`02cfb4ec : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : Ntfs! ?? ::NNGAKEGL::`string'+0x83b8
fffff880`03ba0050 fffff800`02cfaf6d : fffff880`0129a7d0 fffff880`03ba1370 00000000`00000000 fffff880`0124a000 : nt!_C_specific_handler+0x8c
fffff880`03ba00c0 fffff800`02cf9d45 : fffff880`0129a7d0 fffff880`03ba0138 fffff880`03ba0fa8 fffff880`0124a000 : nt!RtlpExecuteHandlerForException+0xd
fffff880`03ba00f0 fffff800`02d0adc1 : fffff880`03ba0fa8 fffff880`03ba0800 fffff880`00000000 00000000`00000038 : nt!RtlDispatchException+0x415
fffff880`03ba07d0 fffff800`02ccecc2 : fffff880`03ba0fa8 00000000`00000000 fffff880`03ba1050 00000000`00000000 : nt!KiDispatchException+0x135
fffff880`03ba0e70 fffff800`02ccd5ca : fffffa80`0745f750 fffff800`02ce12fc 00000000`00000000 fffffa80`050a0d00 : nt!KiExceptionDispatch+0xc2
fffff880`03ba1050 fffff880`012583f5 : fffff880`012d791d fffff8a0`02b06140 fffff880`012579bb fffff880`03ba1410 : nt!KiGeneralProtectionFault+0x10a (TrapFrame @ fffff880`03ba1050)
fffff880`03ba11e8 fffff880`012d791d : fffff8a0`02b06140 fffff880`012579bb fffff880`03ba1410 fffffa80`0745f750 : Ntfs!memcpy+0x1e5
fffff880`03ba11f0 fffff880`012d8ea1 : fffff880`03ba1410 fffff880`03ba1620 fffff880`03ba1410 fffff8a0`039e2100 : Ntfs!NtfsQueryNameInfo+0x135
fffff880`03ba1290 fffff880`012d7346 : fffff880`03ba1410 fffffa80`0745f750 fffff880`000001a0 fffffa80`000001dc : Ntfs!NtfsCommonQueryInformation+0x621
fffff880`03ba1370 fffff880`012d7b14 : fffff880`03ba1410 fffffa80`0745f750 fffffa80`0745faf0 00000000`00000000 : Ntfs!NtfsFsdDispatchSwitch+0x106
fffff880`03ba13f0 fffff880`010dcbcf : fffff880`03ba1690 fffff880`010dd329 fffff880`03ba1600 00000000`00010205 : Ntfs!NtfsFsdDispatchWait+0x14
fffff880`03ba15e0 fffff880`010db6df : fffffa80`04afdde0 fffffa80`04afdde0 fffffa80`04afdd00 fffffa80`0745f750 : fltmgr!FltpLegacyProcessingAfterPreCallbacksCompleted+0x24f
fffff880`03ba1670 fffff800`02f7cc0a : fffffa80`0745f750 fffff8a0`0a77a010 fffffa80`04afdde0 fffffa80`07470a60 : fltmgr!FltpDispatch+0xcf
fffff880`03ba16d0 fffff800`02fae8df : 00000000`00000004 00000000`00000000 fffff8a0`0a77a010 00000000`000007ff : nt!IopGetFileInformation+0xc6
fffff880`03ba1750 fffff800`02faeec2 : fffffa80`07470a60 00001f80`00000200 00000000`00000000 fffff880`03ba1aa0 : nt!IopQueryNameInternal+0x19f
fffff880`03ba17f0 fffff800`02fa72d0 : 00000000`00000000 00000000`00000000 00000000`00000000 00000... Read more

http://www.sevenforums.com/bsod-help-support/374745-bsod-ntfs-sys-ntfs-0x5a88.html
Relevancy 53.32%

Dear SevenForums I am quite idealess how to further analyze my notebook's problem Here are the specs - newly bought notebook middle of december - Acer Aspire G - comes with pre installed Windows Home Premium x modded by Acer - these errors are present on startup (Acer occasions BSOD and 5755G) random from the first day of use of notebook The tests what i performed - suspecting the WD hard drive wdc wd bpvt- hxzt WD Scorpio Blue i analyzed it with Victoria Hiren's Boot Took more than hours GB hdd i had error I searched the net but only found russian sites where BSOD on startup and random occasions (Acer 5755G) i used google translate and found out that error of this kind should not cause problems Warning Block start at ms - suspecting the RAM i analyzed it with MemTest Took one hour but completed BSOD on startup and random occasions (Acer 5755G) all test with no errors About the Operating System timeline I used the deafult system with several bloatware pre installed demo antivir acer stuff needless things for about weeks Of course uninstalled those bloatware THERE WASN'T A SINGLE DAY WITHOUT BSOD'S or random system slowdowns Then i thought maybe the problem was that i uninstalled some necessary files did not run registry clean or maybe McAffee pre installed antivir left some dll-s or something Alright i downloaded a Windows Home Premium x from MSDN burned it to DVD and installed with the serial key provided with the notebook I ran windows update so every driver and the Windows itself was up to date Then after the first power off at night and start next day the boot problems started again You see ALMOST every start usually cold start cause rebooting times before the login screen appears I used this OS for one week Among my friends there are much smarter people regarding OS-es or PCs than me so i thought i take their suggestion and download an Enterprise edition I want to state it now i want to use my notebook with the provided original OS this is just for test Couple of days ago i installed this Windows Enterprise SP on my notebook days ago to be more precise On the second day i booted my notebook in the morning and got BSOD's on boot One on the first boot one on the second boot after restart On third time i could finally log in Two days passed and here i am About my OS usage - not big gamer - use just a few software - use this notebook for work with CAD software that is why i choose an i platform - use free software for other needs Gimp Irfanview Notepad etc - not using IE using Firefox - not surfing the net without any sense not visiting warez or other quot dangerous quot sites - never had a single virus probably thanks to the carefulness yes i used a couple antivirus programs such as Avast Kaspersky My NOD license expired couple of months ago on my desktop pc never had a virus This laptop was never on public wifi because thanks to theese problems i can't rely on it i'm not bring it with me so i can't use it for what i bought it So i wasted for a piece of paperweight yes i know there's a warranty for this product But the thing is if i give it to them how can i proof it that there is a hardware problem with it I send them the notebook then i do not know wether thy try to service it or just send it back to me stating it repaired and it is my fault to have theese errors i am an incompetent and careless user i deserve it I don t think that this fits on me Right now when i made the system report there is no antivirus on my system i turned off win update updated fully yesterday but turned off the automatic update ----------------------------------------------- ----------------------------------------------- System report as in the tutorial - i am from Hungary so i ran the BSOD Dump amp System File Collection app EXE file with hungarian MUI But for the system report i changed it back for english - i made a video of system booting with my original Home Premium turned off halt on BSOD i forgot to reset it to halt that is why it reboots... Read more

A:BSOD on startup and random occasions (Acer 5755G)

Before I really read into this, I would just take it back to the store you brought it from. I don't think you need to prove anything. JUst tell them that since the day you got the laptop it has been crashing and causing problems.

http://www.sevenforums.com/bsod-help-support/209332-bsod-startup-random-occasions-acer-5755g.html
Relevancy 53.32%

When using Firefox, at random times, my computer at times will lock up on and of and just go slow. Other times it will just freeze and I have to reboot.

Sometimes when I reboot from this I get a BSOD and it asks for the startup repair disk. Sometimes it does not do this. Sunday I believe I got a BSOD after the computer froze on Firefox.

These issues do not happen when using IE.

I have uninstalled add ons and plugins on Firefox, same thing.
I have done the mem test, no problems.
I have done an SFC scan multiple times, no problems.
I have done chkdsk multiple times, no problems.

Also scanned with Malware Bytes, and it gets rid of any detections and it still does it.

Sometimes I think it might be my graphics card. I'm not totally sure. I come to you all for help! Thank you in advance!

A:BSOD on startup (sometimes), PC Locks Up/Freezes Random W/ Firefox

  
Quote: Originally Posted by Arc


Get rid of intel rapid storage. Right click on "my computer" icon and click "manage" on the context menu.
It will open the "computer management" window.
Select "Device Manager" in the left pane, It will list all the existing devices up.
Expand "Disc Drives" by clicking on the triangle in front of it.
Select one item under it, right click, uninstall.
Continue the process for all items under "Disc Drives"
Now restart the computer. At restart, windows will auto configure the appropriate system driver, msahci.sys.




Code:
iaStorA.sys Tue Mar 19 05:36:36 2013 (5147A504)
iaStorF.sys Tue Mar 19 05:36:37 2013 (5147A505)
------------------------

Code:
kl1.sys Tue Jun 19 19:27:15 2012 (4FE07E33)
klflt.sys Tue Mar 26 20:44:59 2013 (5151B46B)
klif.sys Tue Mar 26 21:07:33 2013 (5151B9B5)
klim6.sys Thu Aug 2 17:09:23 2012 (501A5FE3)
klkbdflt.sys Mon Sep 3 19:55:35 2012 (5044B6D7)
klmouflt.sys Mon Sep 3 20:21:58 2012 (5044BD06)
kltdi.sys Mon Apr 29 18:07:50 2013 (517E6296)
kneps.sys Tue Mar 5 15:09:23 2013 (5135B643)
Please uninstall Kaspersky for the time being. Use Microsoft Security Essentials & the Free version of Malwarebytes, update and make full scans separately: Uninstallers (removal tools) for common antivirus software - ESET Knowledgebase
Help protect your PC with Microsoft Security Essentials
Malwarebytes Free


   Note
Do not start the trial version of MalwareBytes

You may also take a look at: Good & Free System Security Combination
------------------------
Reduce the start-up items, Antivirus software is basically whats required. Remove Startup Programs in Windows 7
Clean Startup in Windows 7
------------------------
Upload a screenshot using: CrystalDiskInfo For how to upload a screenshot or file, read here
Test your Hard Drive(s) by running: Hard Drive Diagnostic Procedure
Please update these drivers:NTIOLib_X64.sys Thu Oct 25 16:27:58 2012 (5089142E)
MSI Afterburner driver (known BSOD issues with Windows) Also found to be a part of MSI Live Update 5
Driver Reference Table - NTIOLib_X64.sys

rsdrvx64.sys Thu Feb 12 19:01:49 2009 (49941DBD)
EldoS Corporation RawDisk Driver
Driver Reference Table - rsdrvx64.sys






  
Quote: Originally Posted by Arc


Lately we have experienced some issues with the latest driver. Install the 314.22 WHQL only.

Code:
nvhda64v.sys Sun Jun 16 18:38:07 2013 (51BDB1AF)
nvvad64v.sys Tue Aug 20 17:29:10 2013 (52135306)
nvlddmkm.sys Thu Sep 12 11:16:00 2013 (52314E10)
Uninstall All nvidia items in Control Panel > Programs and features3D Vision Control Driver
3D Vision Driver
Graphics Driver
HD Audio Driver
PhysX
nvidia Update
(Are you using nvidia chipset drivers? If so, dont uninstall anything other than those are listed).
Now follow Drivers - Clean Left over Files after Uninstalling
Boot normally now. Go to Drivers - Download NVIDIA Drivers, Download 314.22 WHQL. While installing, Select Custom (Advanced) install. In the next page, follow this settings:


Let us know the results.


------------------------
Test and Diagnose RAM Issues with Memtest86+: RAM - Test with Memtest86+


   Tip
Pay close attention to Part 3 of the tutorial "If you have errors"
Test the RAM with Memtest86+ for at least 7-10 passes. It may take up to 22 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold.


Let us know the results.

http://www.sevenforums.com/bsod-help-support/306094-bsod-startup-sometimes-pc-locks-up-freezes-random-w-firefox.html
Relevancy 53.32%

Hi i took my new laptop out of the box yesterday i have been having an issue with it a bsod randomly it even happens in safe mode I was trying to get some files off of it to reset it again but another bsod happened now the laptop turns on but the screen does not turn on what so ever luckily i managed to get the who crashed reading copied to text file and the minidump files to my external hdd before the screen went completely Laptop specs GB ram intel core i Random startup now on BSOD new blank laptop upon screen AMD Radeon HD GB Windows Who crashed reading Crash dump directory C Random BSOD on new laptop now screen blank upon startup windows Minidump Crash dumps are enabled on your computer On Sat GMT your computer crashed crash dump file C windows Minidump - - dmp This was probably caused by the following module ntfs sys Ntfs x D Bugcheck code x x FB xFFFFF C xFFFFF xFFFFF E Error NTFS FILE SYSTEM file path C windows system drivers ntfs sys product Microsoft Windows Operating Random BSOD on new laptop now screen blank upon startup System company Microsoft Corporation description NT File System Driver Bug check description This indicates a problem occurred in the NTFS file system The crash took place in a standard Microsoft module Your system configuration may be incorrect Possibly this problem is caused by another driver on your system that cannot be identified at this time On Sat GMT your computer crashed crash dump file C windows memory dmp This was probably caused by the following module ntfs sys Ntfs x D Bugcheck code x x FB xFFFFF C xFFFFF xFFFFF E Error NTFS FILE SYSTEM file path C windows system drivers ntfs sys product Microsoft Windows Operating System company Microsoft Corporation description NT File System Driver Bug check description This indicates a problem occurred in the NTFS file system The crash took place in a standard Microsoft module Your system configuration may be incorrect Possibly this problem is caused by another driver on your system that cannot be identified at this time On Sat GMT your computer crashed crash dump file C windows Minidump - - dmp This was probably caused by the following module ndproxy sys NDProxy xF E Bugcheck code x E xFFFFFFFFC xFFFFF E E x xC BB Error KMODE EXCEPTION NOT HANDLED file path C windows system drivers ndproxy sys product Microsoft Windows Operating System company Microsoft Corporation description NDIS Proxy Bug check description This indicates that a kernel-mode program generated an exception which the error handler did not catch This appears to be a typical software driver bug and is not likely to be caused by a hardware problem The crash took place in a standard Microsoft module Your system configuration may be incorrect Possibly this problem is caused by another driver on your system that cannot be identified at this time Google query Microsoft Corporation KMODE EXCEPTION NOT HANDLED On Sat GMT your computer crashed crash dump file C windows Minidump - - dmp This was probably caused by the following module win k sys win k xCF Bugcheck code x B xC xFFFFF F xFFFFF ECF x Error SYSTEM SERVICE EXCEPTION file path C windows system win k sys product Microsoft Windows Operating System company Microsoft Corporation description Multi-User Win Driver Bug check description This indicates that an exception happened while executing a routine that transitions from non-privileged code to privileged code This appears to be a typical software driver bug and is not likely to be caused by a hardware problem The crash took place in a standard Microsoft module Your system configuration may be incorrect Possibly this problem is caused by another driver on your system that cannot be identified at this time On Sat GMT your computer crashed crash dump file C windows Minidump - - dmp This was probably caused by the following module ntfs sys Ntfs x D Bugcheck code x x FB xFFFFF A DA xFFFFF A D E xFFFFF B B Error NTFS FILE SYSTEM file path C windows system drivers ntfs sys product Microsoft Wi... Read more

A:Random BSOD on new laptop now screen blank upon startup

http://www.sevenforums.com/crashes-d...tructions.html
But why bother take it back to the shop if its BSODing out of the box chances are it has problems, probably hardware, get another one

http://www.sevenforums.com/bsod-help-support/273420-random-bsod-new-laptop-now-screen-blank-upon-startup.html
Relevancy 53.32%

Hello, new to the forum.

I've been having increasing problems with my Asus g73jh. Love the performance, but been having random crashes concerning video i assumed. Updated the graphics drivers as well as ran a bios flash on the laptop. The unit always has a problem with being moved and I just moved it for the first time in around 6 months (been using it connected to my screen in living room) to bring to class and it crashed with a page fault error when I arrived at class, then again with another bsod when I got home and unpacked it.

Asus g73jh
Windows 7 home 64 bit
2048 mb ram i333
ati mobility radeon hd 5800 series graphics
amd high definition onboard sound
598 gb hd

A:BSOD and Windows Startup Repair with random crashes

Please remove any CD visualization programs such as Daemon Tools and Alcohol 120%.

They use a driver, found in your dmp, called sptd.sys, that is notorious for causing BSODs.

Use this SPTD uninstaller DuplexSecure - Downloads DuplexSecure - FAQ

When finished you can use this Freeware:

MagicISO Virtual CD/DVD-ROM (MagicDisc) in its place

Using MagicISO to create ISO image files

http://www.sevenforums.com/bsod-help-support/220242-bsod-windows-startup-repair-random-crashes.html
Relevancy 53.32%

I get random BSOD's and it happens most when dealing with logging in or starting up. And sometimes other moments.

I use a GT72 6QD Dominator G MSI notebook.MSI-Fri_11_03_2016_134400_28.zip

A:Random BSOD's - Usually at startup / login / Or coming from sleep etc

Do two things.
1. Clean boot. Clean Boot - Perform in Windows 10 to Troubleshoot Software Conflicts - Windows 10 Forums
2. Update windows to version 10586
See how it goes. Let us know.
____________________________________________________________________________

Code:
Windows 10 Kernel Version 10240 MP (8 procs) Free x64

Code:
BugCheck A, {8, 2, 0, fffff8034a4bd2d1}

Probably caused by : ntkrnlmp.exe ( nt!KiInsertTimerTable+b1 )

Followup: MachineOwner
---------

http://www.tenforums.com/bsod-crashes-debugging/43689-random-bsods-usually-startup-login-coming-sleep-etc.html
Relevancy 53.32%

Hello!

I have problems with random BSODs during Windows startup - they appear after the welcome screen, when the desktop is loading. They have been present for over a year, so I have decided to format my laptop and install everything again. Unfortunately, after this operation the bluescreens started to appear more often, even during the boot process, which leads to the windows repair tool starting if I do not select to continue booting. The tool can not repair anything. Most of the crash dumps point to the ntoskrnl.exe+748c0.

I have already run memtest86 two times. First time did 70 passes on the 10th test and the second time did 5 passes on the deafult settings. Both test did not return any errors. CrystalDiskInfo shows my disk health as good condition. Two passes with sfc /scannow did not find anything wrong with my system files.

Attachment 364409

Thank you very much for your help!
Attachment 364410

A:Random BSOD during startup, mostly points to ntoskrnl.exe+748c0

Hi anchan.

Test your RAM modules for possible errors. How to Test and Diagnose RAM Issues with Memtest86+
Run memtest86+ for at least 8 consecutive passes.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Let us know the result. A camera snap of the memtest86+ screen before closing the program will be nice.
________________________________________________________

Code:
BugCheck 4E, {2, 1c2c51, 25f5ff, 1}

Probably caused by : memory_corruption ( nt!MiUnlinkPageFromLockedList+8d )

Followup: MachineOwner
---------

Code:
BugCheck A, {fffff6800001e298, 0, 0, fffff80002edd8d2}

Probably caused by : memory_corruption ( nt!MiUpdateWsle+122 )

Followup: MachineOwner
---------

http://www.sevenforums.com/bsod-help-support/374297-random-bsod-during-startup-mostly-points-ntoskrnl-exe-748c0.html
Relevancy 53.32%

Hello I have recently build build my own pc This pc has never worked stable i've been experiencing random bsod's Sometimes they come in a row and the system is stable for only a few minutes Sometimes usually when I tweaked a little with the system like increased the voltage over the ram modules or removed a network card which I didn't use reinstall windows the system would be stable for days before the bsod's came in big numbers again Today I used the driver verifier to see if the problem was driver related When my computer would verifier Driver Random startup + BSOD's crash start up with driver Random BSOD's + Driver verifier startup crash verifier enabled the system would crash before it could startup windows It did however generate a minidump file containing information about the crash The last minidumps that are attached are caused by the driver varifier startup crash the other files are due to random crashes over the past month My system specs Random BSOD's + Driver verifier startup crash Windows Ultimate x Full Retail Processor AMD Phenom II X T Processor GHz Memory x GB DDR - G Video Card Asus Eah- MB Motherboard MSI A-G - Socket AM - ATX I Random BSOD's + Driver verifier startup crash hope dat I have provided you with enough information Any help on this matter would be greatly appreciated

A:Random BSOD's + Driver verifier startup crash

  
Quote: Originally Posted by Jim Tol


Hello,

I have recently build build my own pc. This pc has never worked stable, i've been experiencing random bsod's. Sometimes they come 20 in a row and the system is stable for only a few minutes. Sometimes, usually when I tweaked a little with the system, like increased the voltage over the ram modules or removed a network card which I didn't use, reinstall windows, the system would be stable for days before the bsod's came in big numbers again.

Today I used the driver verifier to see if the problem was driver related. When my computer would start up with driver verifier enabled, the system would crash before it could startup windows. It did however generate a minidump file containing information about the crash. The last 5 minidumps that are attached are caused by the driver varifier startup crash, the other files are due to random crashes over the past month.

My system specs:
Windows 7 Ultimate x64, Full Retail
Processor: AMD Phenom II X6 1055T Processor 2.80 GHz
Memory: 2x 2GB DDR3-1333G
Video Card: Asus Eah-5670, 512 MB
Motherboard: MSI 870A-G54 - Socket AM3 - ATX

I hope dat I have provided you with enough information. Any help on this matter would be greatly appreciated!


virtually all were identical and Related to dtsoftbus01.sys Virtual Bus Driver from DT Soft Ltd. I would remove it to test.

Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\K\Desktop\Windows_NT6_BSOD_jcgriff2\053111-24850-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols;srv*e:\symbols
*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (6 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16695.amd64fre.win7_gdr.101026-1503
Machine Name:
Kernel base = 0xfffff800`03066000 PsLoadedModuleList = 0xfffff800`032a3e50
Debug session time: Tue May 31 10:35:50.580 2011 (GMT-4)
System Uptime: 0 days 0:00:19.876
Loading Kernel Symbols
...............................................................
......................................................
Loading User Symbols
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck C9, {23e, fffff88002a2d308, fffff9800e57eea0, 0}

Unable to load image \SystemRoot\system32\DRIVERS\dtsoftbus01.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for dtsoftbus01.sys
*** ERROR: Module load completed but symbols could not be loaded for dtsoftbus01.sys
Probably caused by : dtsoftbus01.sys ( dtsoftbus01+1308 )

Followup: MachineOwner
---------

2: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

DRIVER_VERIFIER_IOMANAGER_VIOLATION (c9)
The IO manager has caught a misbehaving driver.
Arguments:
Arg1: 000000000000023e, A driver has marked an IRP pending but didn't return STATUS_PENDING.
Arg2: fffff88002a2d308, The address in the driver's code where the error was detected.
Arg3: fffff9800e57eea0, IRP address.
Arg4: 0000000000000000, Status code.

Debugging Details:
------... Read more

http://www.sevenforums.com/bsod-help-support/166431-random-bsods-driver-verifier-startup-crash.html
Relevancy 53.32%

My system randomly freezes and sometimes the screen will go blank....

When i try and start up the system i usually get stuck on the loading screen and have to restart, or the system will freeze as i'm logging in...

I get a BSoD with

DRIVER_IRQL_NOT_LESS_OR_EQUAL

0x000000D1 (0x000000000 0x0000000FF ) and some other 0x000stuff

I've seen this might be something to do with corrupt drivers or something.. but i have not installed anything for a while..

I have done virus scans and they have found errors, removed them, but this still happens...

Anyone who can help please? thanks
 

Relevancy 53.32%

I have recently installed fresh Windows 8 on my laptop - HP 6735b. Installation went smooth, it has installed all the drievers on his own, I just installed few more applications and within few days, problems appeared. I'm getting BSOD on startup, but sometimes it starts normaly and after few minutes/hours - BSOD appears.
If you need any other information, just aks.
Thank you in advance

A:BSOD HP-6735B WIN8 Memory.dmp on startup or random

Wow, your Windows is crashing straight at logon and because of the simple fact of logging in:


Code:
WINLOGON_FATAL_ERROR (c000021a)
The Winlogon process terminated unexpectedly.
Arguments:
Arg1: fffff8a003457cc0, String that identifies the problem.
Arg2: 0000000000000000, Error Code.
Arg3: 0000000000000000
Arg4: 0000000000000000

Debugging Details:


I haven't seen too much of this lately. (You machine really wants to run Windows 7 and not 8.) Let's see what we can do about it anyhow.

Uninstall HP Quick Launch:


Code:
hpdskflt hpdskflt.sys Wed Jul 08 14:41:38 2009 (4A54E862)
HpqKbFiltr HpqKbFiltr.sys Wed Apr 29 09:48:30 2009 (49F85AAE)


Uninstall HP Hotkey support or Quick Launch Buttons:


Code:
cpqbttn64 cpqbttn64.sys Mon Apr 20 10:40:33 2009 (49EC8961)


Update Broadcom Netlink Gigabit network driver:


Code:
b57nd60a b57nd60a.sys Fri Oct 21 01:21:58 2011 (4EA10176)



Update Broadcom wireless driver:


Code:
bcmwl63a bcmwl63a.sys Tue Mar 13 20:31:05 2012


Update Synaptics Touchpad driver:


Code:
SynTP SynTP.sys Fri May 14 13:31:08 2010 (4BED88DC)


There was also a 0x124 hardware stop. Check the fans so that they are working well and use compressed air to clean the vents, if necessary.

If issues remain at all in any form, uninstall AVG then set Windows Defender and Windows Firewall to Automatic and start them too.

http://www.eightforums.com/bsod-crashes-debugging/40246-bsod-hp-6735b-win8-memory-dmp-startup-random.html
Relevancy 53.32%

I have been experiencing BSODs since 2013 on my laptop. It rarely happens but when the laptop heats up, it does. Currently, the situation is becoming worse and it always happens during startup. I remember seeing something called 'atikmpag.sys' when BSOD appears. I have tried the googling some fixes but they don't work.

A:BSOD during Startup (after Windows logo) at random times

Welcome to the forum GuoJungggg,

There are no dumps in the zip to analyze.

Make sure your dump logging is enabled.





Quote:
Click Start, point to Settings, and then click Control Panel.
Double-click System.
Click the Advanced tab, and then click Settings under Startup and Recovery.
Check Write an even to the system log, and Automatically restart.
In the Write debugging information list, click Small memory dump (256k).
Location of Dumps:
C:\Windows\minidump


Remove AVG for testing purpose. Replace it with MSE.

Microsoft Security Essentials is recommended from a strict BSOD perspective, compatibility & stability
compared to other antivirus or internet security software. It is free and lightweight:-Microsoft Security Essentials - Free Antivirus for Windows
Malwarebytes: Removes malware including viruses, spyware, worms and trojans, plus it protects your computer
Good and Free system security combination.


   Warning
Do not start the free trial of Malware Bytes; remember to deselect that option when prompted.



Make scans with the following:

Kaspersky TDSSKillerAnti-rootkit utility TDSSKiller
ESET online scanner: Free Online Virus Scanner | ESET
Perform a Clean boot:Troubleshoot Application Conflicts by Performing a Clean Startup
Reduce items at start-up. No software except anti-virus is required plus doing this improves the time for logging into windows:How to Change, Add, or Remove Startup Programs in Windows 7
Run the System File Checker that scans the of all protected Windows 7 system files and replaces incorrect corrupted, changed/modified, or damaged versions with the correct versions if possible:Click on the
Type CMD on Search
Left click and Run as Administrator
Type SFC /scannow
Full tutorial here:SFC /SCANNOW Command - System File Checker
Update the ATI drivers to the latest version available.

Code:
Driver c:\windows\system32\drivers\atikmpag.sys (8.14.1.6143, 272.50 KB (279,040 bytes), 26-Jan-11 7:37 AM)
Check for heating issues using Speccy or HWMonitor. Upload a screen shot with either of the tools: Speccy - System Information - Free Download
HWMonitor CPUID - System & hardware benchmark, monitoring, reporting
Screenshots and Files - Upload and Post in Seven Forums
Post back results.

http://www.sevenforums.com/bsod-help-support/350031-bsod-during-startup-after-windows-logo-random-times.html
Relevancy 53.32%

Hello, I've had BSOD happening at random times for the past 9 months. At first I thought it was a cpu problem, and stopped most of my non-necessary startup programs. Recently, this has started happening at random times, usually a few hours after the computer has been on. Tried cleaning my fans and reseating, opened ventilation to make sure it wasn't overheating. I honestly have no clue what to do at this point, can anyone help? Thanks in advance.

A:BSOD at random times, startup or game playing most often

No AV? What version of Malwarebytes do you have?


Code:
BugCheck A, {1000000dd, 2, 1, fffff80002f060c5}

Probably caused by : ntkrnlmp.exe ( nt!KeStackAttachProcess+115 )

Code:
Usual causes: Kernel mode driver, System Service, BIOS, Windows, Virus scanner, Backup tool, compatibility

Code:
1: kd> !irql
Debugger saved IRQL for processor 0x1 -- 2 (DISPATCH_LEVEL)
I can't see much from the dump file, apart from an illegal page fault occurring.


Code:
1: kd> .trap fffff880`031cb770
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000008 rbx=0000000000000000 rcx=fffffa8006a3abb0
rdx=fffff880031cba58 rsi=0000000000000000 rdi=0000000000000000
rip=fffff80002f060c5 rsp=fffff880031cb900 rbp=fffff880031cba58
r8=fffffa8006a3aba0 r9=0000000000000130 r10=fffff880009ea0c0
r11=fffffa8006a3ab50 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei pl zr na po nc
nt!KeStackAttachProcess+0x115:
fffff800`02f060c5 f00fc186dc000000 lock xadd dword ptr [rsi+0DCh],eax ds:00000000`000000dc=????????
Run Driver Verifier to scan for any corrupted drivers which may be causing problems, this program works by running various stress tests on drivers, in order to produce a BSOD which will locate the driver; run for least 24 hours:Driver Verifier - Enable and Disable


   Information
Additional Help - Using Driver Verifier to identify issues with Drivers


Code:
1: kd> !sysinfo machineid
Machine ID Information [From Smbios 2.4, DMIVersion 36, Size=2561]
BiosVendor = Award Software International, Inc.
BiosVersion = FB
BiosReleaseDate = 08/26/2011
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = M68MT-S2
SystemFamily =
SystemVersion =
SystemSKU =
BaseBoardManufacturer = Gigabyte Technology Co., Ltd.
BaseBoardProduct = M68MT-S2
BaseBoardVersion = x.x
I would check for any potential BIOS updates for your motherboard, ensure you flash the BIOS, with the exact version and revision number for your motherboard, otherwise you could potentially irreversibly corrupt your BIOS.

http://www.sevenforums.com/bsod-help-support/300106-bsod-random-times-startup-game-playing-most-often.html
Relevancy 52.89%

Hi all,

I am having a BSoD issue with my PC. Its more or less a new install with all my programs/drivers and updates installed. The system does not show a Blue Screen but just restarts my PC and shows the start up repair page...when I restart the machine the second time I can log on to Windows where a dialog shows "Windows stopped working - Check for Solutions etc..."

Basically the BSoD sometimes happens when I switch my PC on (start-up) or when I come out of sleep mode. I have tried to disable start-up programs/services but cannot seem to find the issue causing this. I have also gone onto my motherboards webpage and checked for latest drivers.

I have attached the SF Diagnostic Tools information.

Any help is greatly appreciated and many thanks in advanced for the help

A:BSoD: random at startup and coming out of sleep - Files attatched

Sorry for separate post

http://www.sevenforums.com/bsod-help-support/312815-bsod-random-startup-coming-out-sleep-files-attatched.html
Relevancy 52.89%

Hello all,

I'm new here, and my buddy told me you guys are the best. So I've had my computer for a few years now and until recently it's been running great! I'm not sure why, but it's becoming a struggle to get it to start up and keep running with any kind of consistency. Sometimes it's got to get restarted 4 or 5 times before it'll stay on long enough to get into the event log, and then after looking through it I get nothing but the unexpected shutdown error that I caused by resetting my comp. If any of you'se guys could look through my BSOD post I would greatly appreciate the help, thanks!

A:Starting to get random startup issues and BSOD's [moved from Vista/7]

There's no BSOD memory dumps in the uploaded information. Please do the following:

Quote:




Upload Dump Files:
Please go to C:\Windows\Minidump and zip up the contents of the folder. Then upload/attach the .zip file with your next post.
Left click on the first minidump file.
Hold down the "Shift" key and left click on the last minidump file.
Right click on the blue highlighted area and select "Send to"
Select "Compressed (zipped) folder" and note where the folder is saved.
Upload that .zip file with your next post.

If you have issues with "Access Denied" errors, try copying the files to your desktop and zipping them up from there. If it still won't let you zip them up, post back for further advice.

If you don't have anything in that folder, please check in C:\Windows for a file named MEMORY.DMP. If you find it, zip it up and upload it to a free file hosting service . I recommend Windows Live SkyDrive - Welcome to Windows Live or another free, file-hosting service. Then post the link to it in your topic so that we can download it.

Then, follow the directions here to set your system for Minidumps (much smaller than the MEMORY.DMP file): Set MiniDump




Ensure that Windows Updates are entirely up to date. You have 63 updates listed, while my system shows 84 updates. I did notice Windows Update failures in the WER logs.

Uninstall Catalyst Control Center. If needed you can download the latest version from the ATI website and install it AFTER uninstalling the current version.

No signs of BSOD in the WER reports either. As such I'd suggest this:

Quote:




I suggest starting all troubleshooting with the following diagnostic tests. They'll save you a lot of time and heartache if there is a hardware failure, and you'll have the disks on hand in case you need them in the future:

Quote:




H/W Diagnostics:
Please start by running these bootable hardware diagnostics:
Memory Diagnostics (read the details at the link)
HD Diagnostic (read the details at the link)

Also, please run one of these free, independent online malware scans to ensure that your current protection hasn't been compromised: Free Online AntiMalware Scanners (read the details at the link)

http://www.techsupportforum.com/forums/f299/starting-to-get-random-startup-issues-and-bsods-moved-from-vista-7-a-548806.html
Relevancy 52.89%

Hi All First post here but have visited often over the years to learn about various subjects Lately I've been frequenting the many helpful BSOD pages thanks to the problem that is the subject of this thread I'm hoping you wizards can help me pinpoint the offending driver or hardware before I resort to random uninstalls and eventually a clean Windows reinstall as more extreme procedures I know what follows is a read but it's hopefully well-written so please bear with First the System Specs Specs are in my profile BSOD, Random Minutes After Screen Black Startup Freeze, or Basically this is a heavily upgraded OEM the HP m p HP Pavilion Elite m p Desktop PC Product Specifications HP Pavilion Elite m p Desktop PC HP Support The current configuration ran smoothly for over six months before the problem appeared With the exception of the graphics card more on that below Random BSOD, Freeze, or Black Screen Minutes After Startup the most recent changes were the addition of the two HDDs at the beginning of this year when migrating to SSD Before that the machine was completely problem free going back to its inception in she's an old girl I know The Mystery Currently the system is at a point where it always freezes throws a random BSOD or the screen goes black monitor goes to sleep within minutes after startup It almost always happens within five minutes after the desktop loads but occasionally up to ten minutes This always requires a forced restart with a chance of one of these problems occurring again following reboot for an unpredictable number of times What began as typically a single occurrence has since become on average two crash reboot cycles The record was four Once the system is running for at least five minutes the mystical quot five minute rule quot as I've come to know it it works fine I can leave it idle or punish it with maxed out ultimate settings in Skyrim for hours on end and it won't so much as hiccup But after being shut down or in sleep mode for at least some hours the startup problem always resurfaces in whichever flavors and quantities it decides to take In all it's a tolerable nuisance but one that's surely the manifestation of one or more drivers or hardware gone wild Like the worst computing problems this one arose seemingly out of the ether and has been in a downward spiral since The variety and frequency of crashes seems to have gotten progressively worse over the more than two months since the problem first appeared As far as I can tell it all started with a sudden freeze on July that had me thinking my wireless mouse and keyboard batteries needed replacing Weeks went by with no problems until the black screens started occurring Still these were intermittent and occurred days or weeks apart Before long the first BSODs started appearing These were also intermittent at first As time went on it got to the point at which things are now For basically the entire month of September there have been one or more BSODs almost daily uploaded for your debugging pleasure but in any case always one or more of the three types of crashes freeze BSOD or black screen shortly after startup Today's session went like this Freeze three minutes in forced-reboot BSOD some minutes in forced reboot different BSOD seven minutes in broke the quot five minute rule quot I know forced reboot up and running six hours and counting Each day the experience is different last night was a black screen and BSOD but the one constant is the crash es almost always occur within five occasionally ten minutes post startup Or at least that was the case until yesterday when the system threw a curve ball with a BSOD twenty minutes in I pray this isn't a new symptom So far the two startups since then have remained true to the five five to ten minute rule The Detective Work Needless to say I have tried everything I can think of in this harrowing driver hardware whodunit I started off investigating the basics There were no manual changes to software drivers or ... Read more

A:Random BSOD, Freeze, or Black Screen Minutes After Startup

You have described exactly my problem, dude!
If the crash (not necesarilly the BSOD) came in a middle of skype or VOIP conversation, can you still talk/hear for 30 sec - 1 minute, like me? With black screen on, in stand by. I can.
I hardly wait to find the solution for our problem...

Maybe is usefull to check this post too: BSOD minutes after desktop starts

http://www.sevenforums.com/bsod-help-support/347449-random-bsod-freeze-black-screen-minutes-after-startup.html
Relevancy 52.89%

Hello forum Vegas/Random Fallout: startup BSOD BSODs during New playing I'm hoping somebody can assist me with these BSODs My computer is about years old and the only thing I've had replaced in it was a hard drive Here is some information about the BSODs Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode e BCP FFFFFFFFC BCP FFFFF F B BCP FFFFF A A BCP FFFFF A B OS Version Service Pack Product Files that help describe the BSOD playing Fallout: New Vegas/Random BSODs during startup problem C BSOD playing Fallout: New Vegas/Random BSODs during startup Windows Minidump - - dmp C Users Jared AppData Local Temp WER- - BSOD playing Fallout: New Vegas/Random BSODs during startup sysdata xml Read our privacy statement online Windows Privacy Statement - Microsoft Windows If the online privacy statement is not available please read our privacy statement offline C Windows system en-US erofflps txt Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode e BCP BCP BCP BCP OS Version Service Pack Product And I have also been getting a blue screen corresponding with the file quot nvlddmkm sys quot which is a Nvidia driver file and momentarily my screen will flicker on and off and a message will pop up in the corner stating that quot This driver has stopped working but has recovered quot Any assistance would be much appreciated Thank you

A:BSOD playing Fallout: New Vegas/Random BSODs during startup

  
Quote: Originally Posted by jman114


Hello forum. I'm hoping somebody can assist me with these BSODs. My computer is about 2 years old and the only thing I've had replaced in it was a hard drive. Here is some information about the BSODs.

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 7e
BCP1: FFFFFFFFC0000005
BCP2: FFFFF80002F6B682
BCP3: FFFFF880031A1A48
BCP4: FFFFF880031A12B0
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\111511-19546-01.dmp
C:\Users\Jared\AppData\Local\Temp\WER-73164-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
_______________________________________________________________________

Problem signature
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 1e
BCP1: 0000000000000000
BCP2: 0000000000000000
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1
_______________________________________________________________________

And I have also been getting a blue screen corresponding with the file "nvlddmkm.sys" which is a Nvidia driver file, and momentarily my screen will flicker on and off and a message will pop up in the corner stating that "This driver has stopped working but has recovered".

Any assistance would be much appreciated. Thank you!


We do need the actual DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:

* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.
To ensure minidumps are enabled:

* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

http://www.sevenforums.com/bsod-help-support/197467-bsod-playing-fallout-new-vegas-random-bsods-during-startup.html
Relevancy 52.89%

I am getting a BSoD. It started the day I built computer. I formatted. Not one problem for 3 weeks. I left my computer off for a full day, and wen I turned it on, it won't even start up. Blue screen loop. Here is the error code as I could pull it off of one that actually stayed up longer than a blink.

STOP: 0x00000024 (0x000000000001904FB, 0xFFFFF88008811CA8, 0xFFFFF88008811500, 0xFFFFF88001CCBC27) Ntfs.sys - address FFFFF88001CCBC27 base at FFFFF88001C1F0000

The last thing I did was install an update suggested for Windows. I'm running the following.

850w corsair psu.
AMD Black Edition - AMD Phenom II X4 3.4 GHz Processor
8gb Patriot 1333 ddr3 ram
ati radeon hd5770 1gb gddr5 graphics card
2tb western digital caviar hdd
dvd rom


It's in an endless cycle of blue screens.

A:Random BSoD Loop On Startup (Posted Incorrectly First Time: Sorry!)

Have you tried memtest?

http://www.techsupportforum.com/forums/f299/random-bsod-loop-on-startup-posted-incorrectly-first-time-sorry-518524.html
Relevancy 52.46%

This is a BSOD or startup. Black Crash, Screen shortly Random after Freeze, strange problem my desktop has had for a fairly long time Usually my computer will work fine start up with no problems for several days Random Crash, Freeze, Black Screen or BSOD shortly after startup. in a row And then for reasons I don't know it sometimes will start crashing Usually the screen goes completely black and the computer completely non-responsive and it must be hard reset to get any response at all out of it A few times I've actually seen a brief BSOD but too brief to actually read it Random Crash, Freeze, Black Screen or BSOD shortly after startup. and see what Random Crash, Freeze, Black Screen or BSOD shortly after startup. is happening Sometimes the screen will just freeze where it is with the last bit of audio that was playing repeating nonstop The strangest thing about these crashes is they only happen a little bit after or during startup if the computer is fine for minutes I know it'll be fine until the next time it's turned off It has on a few occasions come up with a screen telling me that the CMOS is corrupted I've had startup repair run and tried some kind of hard drive diagnostic tool the startup repair couldn't find a problem and the tool said the hard drive was good I've seen it crash this way in the middle of the bios boot during login in safe mode pretty much any time during the first half-hour to hour of the computer being on But never afterward I ran the diagnostic tool the results are attached to this post Any help at all would be appreciated In case it has any effect on anything my computer used to be a Vista and a complimentary upgrade was used to make it windows

A:Random Crash, Freeze, Black Screen or BSOD shortly after startup.

Hello Xindaris.

It appears that you have tow antivirus programs installed? MSE and Avira?
Uninstall Avira. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.
Download, install and update those, and then run full system scans with both of them, one by one.

Uninstall MagicISO. It may cause the BSODs as you explained.

ITEMVAUUEName MagicISO SCSI Host ControllerManufacturer MagicISO, Inc.PNP Device ID ROOT\SCSIADAPTER\0000Driver c:\windows\system32\drivers\mcdbus.sys (2.7.106.519, 249.56 KB (255,552 bytes), 12/15/2009 5:17 PM)The SCSI adapter installed by MagicISO can cause start time BSODs.

The Display Driver is not Up to date.

Code:
fffff880`04884000 fffff880`0532f000 nvlddmkm T (no symbols)
Loaded symbol image file: nvlddmkm.sys
Image path: nvlddmkm.sys
Image name: nvlddmkm.sys
Timestamp: Fri Mar 15 07:07:00 2013 (51427B3C)
CheckSum: 00A8D47C
ImageSize: 00AAB000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Try to install NVIDIA DRIVERS 320.49WHQL

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

Are you overclocking? As you are getting BSODs, you should stop overclocking and run all the hardware components like CPU, GPU and RAM to their default settings. Also set the BIOS to default, too.
How To Clear CMOS (Reset BIOS)

Free up the startup. Windows does not need any other program to auto start with it, but the auto start programs often conflicts and causes various problems including BSODs.
Click on the Start button
Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the “Startup” tab.
Deselect all items other than the antivirus.
Apply > OK
Accept then restart.
Let us know the results. And, is it a factory installed windows?
______________________________________________________
BSOD ANALYSIS:

Code:
BugCheck 19, {3, fffffa8005182020, fffffa8005182000, fffffa8005182000}

Probably caused by : Pool_Corruption ( nt!ExDeferredFreePool+a53 )

Followup: Pool_corruption
----------------------------------------------------------------------
BugCheck A, {34e502010080, 2, 1, fffff80004079cc8}

*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+1849fd )

Followup: MachineOwner
------------------------------------------------------------------------
BugCheck 50, {fffffa7f8009d9d2, 1, fffffa800626b187, 7}
Could not read faulting driver name
Probably caused by : memory_corruption

Followup: memory_corruption
--------------------------------------------------------------------------
BugCheck 1A, {8886, fffffa8003a29150, fffffa8003a267e0, 500}

Probably caused by : memory_corruption ( nt!MiUnlinkPageFromLockedList+19c )

Followup: MachineOwner
---------

http://www.sevenforums.com/bsod-help-support/297800-random-crash-freeze-black-screen-bsod-shortly-after-startup.html
Relevancy 52.46%

Hi this is my first time posting here in this forum because I am in desperate need of help on my computer My computer startup, shut power of after long shutdown random period off BSOD on gets at least ONCE BSOD every time I turn it on after a long period of shutdown It also sometimes randomly just shuts off or give me additional BSODs It has got to the BSOD after long period of shutdown on startup, random power shut off point that I can't even load to windows recently which lead me to reformat my computer I know the drivers here are not the latest ones I am trying to use only the drivers from the CDs that came with the hardwares because the last time I used all the latest ones it still caused BSODs I am not sure what other information I need to post up Please help with any advices possible very much appreciated Windows Ultimate x - fresh reformat ASUS M A TD Pro AMD Athlon II X Ghz Socket AM W Crucial GB DDR - PC MT JTF AZ- G H It's a x GB set but I'm just using once at the moment to filter out problems SAPPHIRE Vapor-X Radeon HD GB -bit GDDR Western Digital Caviar Black GB RPM SATA Antec Trupower W

A:BSOD after long period of shutdown on startup, random power shut off

Download and install the new version ofDriver Sweeper
Download the most recent software\driver for your ati AMD Graphics Drivers & Software
Uninstall ati software\driver,restart in safe mode,run driver sweeper,choose only AMD-Display andclean,restart in normal mode.
Install the new ati software\driver,restart.

Update DirectX

Read carefully the instructions and run http://www.sevenforums.com/tutorials/160729-
nvidia-amd-video-card-test-occt.html post here the results.

http://www.sevenforums.com/bsod-help-support/202159-bsod-after-long-period-shutdown-startup-random-power-shut-off.html
Relevancy 51.17%

Im having trouble with my newly built computer freezing at random points during my startup and if it does boot up all the way it always freezes on the "Shutting Down" screen. Im running Windows 7 Professional (64-bit) and have reinstalled it two times.
Here is what I currently have in it:

AMD Phenom II X6 1100T
ASUS M4A88T-V EVO/USB3 AM3 AMD 880G HDMI
G.SKILL Value Series 8GB (2 x 4GB) 240-Pin DDR3
WD 1TB HDD
500W Power supply
 

A:Freshly built computer freezes at random points during startup

Sounds like there could be an issue with your BIOS... either needs to be flashed to a newer version to fully support the X6 processor or the settings just need to be tweaked. Make sure your memory is running in accordance to factory spec and that your voltages for both CPU and RAM is within acceptable range.
 

http://www.techspot.com/community/topics/freshly-built-computer-freezes-at-random-points-during-startup.165791/
Relevancy 51.17%

I don't know the error code but I know it happens during multi tasking and the file associated is ntfs.sys

attached the memory dump

A:Random ntfs

Upload a screenshot of your hard disk using CrystalDiskInfo:CrystalDiskInfo Standard Edition
How to Upload and Post a Screenshot and File in Seven Forums
Make a hard drive test from the hard drive manufacturers website:Hard Drive Diagnostic Procedure
Hard drive test both short and long with: SeaTools for Windows
DOS version of Seatools:SeaTools for DOS
SeaTools for DOS tutorial
Make scans with the following:

-Kaspersky TDSSKillerAnti-rootkit utility TDSSKiller
-ESET online scannerFree Online Virus Scanner | ESET

http://www.sevenforums.com/bsod-help-support/281619-random-ntfs.html
Relevancy 50.74%

Hello I suspect I have some malware problem I am a novice so all I have been able to do is follow your instructions in providing logs using the software you have suggested Logfile of Trend Micro HijackThis v Scan saved at on Platform Windows Vista SP WinNT MSIE Internet Explorer v Boot mode Normal Running processes C Windows system Dwm exe C Windows Explorer EXE C Program Files computer messages random .dll BSODs, error on malaise startup, general Windows Defender MSASCui exe C Windows system taskeng exe C Windows System hkcmd exe C Windows System igfxpers exe C Windows System WLTRAY EXE C Program Files Common Files aol ee aolsoftware exe C Program Files Kontiki KHost exe C Program Files iTunes iTunesHelper exe C Windows system igfxsrvc exe C Program Files Avira AntiVir Desktop avgnt exe C Program Files SigmaTel C-Major Audio WDM sttray exe C Program Files Common Files Java Java Update jusched exe C Program Files DivX DivX Update DivXUpdate exe C Program Files Google GoogleToolbarNotifier GoogleToolbarNotifier exe C Program Files Dell Support Center bin sprtcmd exe C Program .dll error messages on startup, random BSODs, general computer malaise Files Common Files InstallShield UpdateService ISUSPM exe C Program Files Samsung Samsung .dll error messages on startup, random BSODs, general computer malaise New PC Studio NPSAgent exe C Program Files Windows Media Player wmpnscfg exe C Program Files Digital Line Detect DLG exe C Program Files Dell QuickSet quickset exe C Windows system wbem unsecapp exe C Program Files Google Chrome Application chrome exe C Program Files Google Chrome Application chrome exe C Windows system wuauclt exe C Users farhad chowdhury Desktop Desktop HijackThis exe C Program Files Mozilla Firefox firefox exe R - HKCU Software Microsoft Internet Explorer Main Default Page URL http www google co uk ig dell hl en amp client dell-usuk amp channel uk amp ibd R - HKCU Software Microsoft Internet Explorer Main Search Page http go microsoft com fwlink LinkId R - HKCU Software Microsoft Internet Explorer Main Start Page http search conduit com SearchSource amp ctid CT R - HKLM Software Microsoft Internet Explorer Main Default Page URL http www google co uk ig dell hl en amp client dell-usuk amp channel uk amp ibd R - HKLM Software Microsoft Internet Explorer Main Default Search URL http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Main Search Page http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Main Start Page http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Search SearchAssistant R - HKLM Software Microsoft Internet Explorer Search CustomizeSearch R - HKCU Software Microsoft Internet Explorer SearchURL Default http search aol co uk web isinit true amp query s R - HKCU Software Microsoft Internet Explorer Main Window Title Internet Explorer provided by Dell R - HKCU Software Microsoft Windows CurrentVersion Internet Settings ProxyOverride local R - HKCU Software Microsoft Internet Explorer Toolbar LinksFolderName R - URLSearchHook no name - f -f f - -bac -e ec e - no file O - Hosts localhost O - BHO Yahoo Toolbar Helper - D -C F - EFB- B - ECA - C Program Files Yahoo Companion Installs cpn yt dll O - BHO AVG Safe Search - CA F - F E- B -A E- E E C C - C Program Files AVG AVG avgssie dll file missing O - BHO no name - C C A-E - b - D - CECB - no file O - BHO UrlHelper Class - D EBF- B - A - ED - FA FE - C Program Files BearShare Applications BearShare MediaBar BearShareIEHelper dll O - BHO Search Helper - EBF - F- bff-A F-B E AAC B - C Program Files Microsoft Search Enhancement Pack Search Helper SEPsearchhelperie dll O - BHO IEHlprObj Class - CA ED -F FB- -A - E - C Program Files iWin Games iWinGamesHookIE dll O - BHO Windows Live ID Sign-in Helper - D - C - ABF- ECC- C - C Program Files Common Files Microsoft Shared Windows Live WindowsLiveLogin dll O - BHO no name - f -f f - -bac -e ec e - no file O - BHO Google Tool... Read more

A:.dll error messages on startup, random BSODs, general computer malaise

Hi there,
Just wondered if you tech guys have had the opportunity to look at my post. Would be most grateful for your assistance
 

https://forums.techguy.org/threads/dll-error-messages-on-startup-random-bsods-general-computer-malaise.977913/
Relevancy 49.88%

Hello there So I've been running into this problem for a while and I'm not sure what to do Seemingly Random ntfs.sys BSODs about it I built this PC in December of and it's been giving me some issues since built it but the most recent problem is an ntfs sys blue screen that pops up every so often The most recent occurrence of this seemed to be while I was on a Skype call and using Google Chrome However that doesn't always trigger it In fact I haven't yet figured out a way to reproduce the problem consistently I've tried various kinds of stress testing of Seemingly Random ntfs.sys BSODs the CPU RAM and GPU all Seemingly Random ntfs.sys BSODs of which turn up no problems I found that this BSOD error popped up significantly more often however while I was running a Seemingly Random ntfs.sys BSODs program designed to use a webcam as a security camera whenever it detects movement while the computer is locked I uninstalled that program I've also run chkdsk several times on all the internal drives to see if any of them are failing and none of them show any errors Other issues I've run into with this computer are I use an SSD for the boot drive and I've had to have it replaced under warranty due to an issue where the computer would act as though I've unplugged the drive while the computer was running That issue hasn't come up again since I've done that Also tabs on Google Chrome keep crashing for no apparent reason even though I know it hasn't run out of memory The machine has GB Please let me know if I've forgotten anything or if you need more information

A:Seemingly Random ntfs.sys BSODs

Hi Pete993 & Welcome to the forums ^_^,

I have analysed your dump files and below has been provided an analysis of the same for informative purposes :-

Code:
**************************Wed Oct 15 08:02:55.687 2014 (UTC + 5:30)**************************
Loading Dump File [C:\SysnativeBSODApps\101414-43468-01.dmp]

Windows 8 Kernel Version 9600 MP (6 procs) Free x64

Built by: 9600.17238.amd64fre.winblue_gdr.140723-2018

System Uptime: 3 days 22:29:01.405

*** ERROR: Module load completed but symbols could not be loaded for Ntfs.sys

Probably caused by : Ntfs.sys ( Ntfs+c114b )

BugCheck 24, {b500190637, ffffd00071787658, ffffd00071786e60, fffff80193b0114b}
BugCheck Info: NTFS_FILE_SYSTEM (24)

Arguments:
Arg1: 000000b500190637
Arg2: ffffd00071787658
Arg3: ffffd00071786e60
Arg4: fffff80193b0114b
PROCESS_NAME: System

BUGCHECK_STR: 0x24

DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

FAILURE_BUCKET_ID: 0x24_Ntfs+c114b

BIOS Version 1903

BIOS Release Date 07/11/2013

Manufacturer To be filled by O.E.M.

Product Name To be filled by O.E.M.

??????????????????????????????????????????????????????????????????????????????????????``
**************************Sat Oct 11 09:33:13.336 2014 (UTC + 5:30)**************************
Loading Dump File [C:\SysnativeBSODApps\101014-38531-01.dmp]

Windows 8 Kernel Version 9600 MP (6 procs) Free x64

Built by: 9600.17238.amd64fre.winblue_gdr.140723-2018

System Uptime: 2 days 2:52:17.069

*** ERROR: Module load completed but symbols could not be loaded for Ntfs.sys

Probably caused by : Ntfs.sys ( Ntfs+c114b )

BugCheck 24, {b500190637, ffffd0002337a658, ffffd00023379e60, fffff8019cd7214b}
BugCheck Info: NTFS_FILE_SYSTEM (24)

Arguments:
Arg1: 000000b500190637
Arg2: ffffd0002337a658
Arg3: ffffd00023379e60
Arg4: fffff8019cd7214b
PROCESS_NAME: System

BUGCHECK_STR: 0x24

DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

FAILURE_BUCKET_ID: 0x24_Ntfs+c114b

BIOS Version 1903

BIOS Release Date 07/11/2013

Manufacturer To be filled by O.E.M.

Product Name To be filled by O.E.M.

??????????????????????????????????????????????????????????????????????????????????????``


Below is a list of 3rd party drivers present on your system :-

Code:
**************************Wed Oct 15 08:02:55.687 2014 (UTC + 5:30)**************************
AsUpIO.sys Tue Aug 3 08:17:59 2010 (4C57835F)
afcdp.sys Wed Jul 20 20:16:03 2011 (4E26EA2B)
ASUSFILTER.sys Tue Sep 20 21:16:33 2011 (4E78B559)
AiChargerPlus.sys Thu Apr 19 06:47:35 2012 (4F8F67AF)
GEARAspiWDM.sys Fri May 4 01:26:17 2012 (4FA2E2E1)
Rt630x64.sys Tue Jun 12 19:07:53 2012 (4FD74631)
amd_sata.sys Tue Jun 12 19:54:37 2012 (4FD75125)
amd_xata.sys Tue Jun 12 19:54:45 2012 (4FD7512D)
RTKVHD64.sys Tue Aug 7 16:19:39 2012 (5020F2C3)
AsIO.sys Wed Aug 22 15:24:47 2012 (5034AC67)
rtwlane.sys Thu Aug 23 18:46:07 2012 (50362D17)
lvrs64.sys Tue Oct 23 07:41:24 2012 (5085FCCC)
lvuvc64.sys Tue Oct 23 07:42:08 2012 (5085FCF8)
tib_mounter.sys Thu Dec 27 18:55:05 2012 (50DC4C31)
snapman.sys Wed Jan 16 19:14:06 2013 (50F6AEA6)
fltsrv.sys Fri Mar 1 19:23:39 2013 (5130B2E3)
tib.sys Wed Mar 20 14:30:38 2013 (51497AB6)
hcw72ADFilter.sys Fri Mar 29 22:32:50 2013 (5155C93A)
hcw72ATV.sys Fri Mar 29 22:34:11 2013 (5155C98B)
hcw72DTV.sys Fri Mar 29 22:36:03 2013 (5155C9FB)
asmtxhci.sys Mon Jun 24 22:46:27 2013 (51C87EEB)
asmthub3.sys Mon Jun 24 22:46:39 2013 (51C87EF7)
exfat.SYS Thu Aug 22 17:10:18 2013 (5215F8A2)
SmartDefragDriver.sys Mon Dec 23 15:35:52 2013 (52B8... Read more

http://www.eightforums.com/bsod-crashes-debugging/55488-seemingly-random-ntfs-sys-bsods.html
Relevancy 49.45%

When I turn my computer on sometimes it will BSOD or maybe after 30 minutes of using it. This started happening today and I did not download anything new or did anything different from what I normally do.

A:BSOD sometimes after i turn on my computer, sometimes just random BSOD

Hi julianiscool.

One of your crash dumps reports some malfunction of Avast. Uninstall Avast using Avast Uninstall Utility. At least as a test. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.
Though I am in doubt that the issue is really caused by Avast (sometimes it does), it is better to remove it as it is flagged.

Also test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Let us know the results.
_______________________________

Code:
BugCheck C5, {8, 2, 0, fffff8000340cb05}

*** WARNING: Unable to verify timestamp for aswMonFlt.sys
*** ERROR: Module load completed but symbols could not be loaded for aswMonFlt.sys
Probably caused by : Pool_Corruption ( nt!ExDeferredFreePool+249 )

Followup: Pool_corruption
---------

http://www.sevenforums.com/bsod-help-support/334465-bsod-sometimes-after-i-turn-my-computer-sometimes-just-random-bsod.html
Relevancy 49.45%

Hi experts,

I'm helping a friend to fix the laptop with BOSD. I tried to google and went thru many threads but i didnt got good result.

+ Laptop is MacbookAir 2011, core I7, installed windows 7 professional (OEM version).
+ The BOSD is quite random when using but almost all the time when i try to shut it down.

When i used Bluescreen to check the dump file, it shows the issue with NTFS.sys and NTOSKRNL.exe. I tried to use verified to test this 2 drivers and it crashed all the times when i start windows.

I ran CHKDSK /r but it didnt fix the problem. I tried mem test too but the result was good.

I appreciate all inputs from experts here. Attached is the dump files.

Many thanks!

A:BOSD (random + shutdown) - ntoskrnl.exe, ntfs.sys

I attached Windows_NT6_BSOD_jcgriff2.zip.

Thanks!

http://www.sevenforums.com/bsod-help-support/229813-bosd-random-shutdown-ntoskrnl-exe-ntfs-sys.html
Relevancy 49.02%

If I install WinXP and make the system partition NTFS, it is not possible to see the NTFS partition if I boot from a "normal" boot diskette such as one from WIN9x (95/98/Me).

In the XP help I find nothing which deals with special XP boot/startup diskettes.

Is XP so good it's own internal error checking is good enough to never require manual intervention in the system files (eg. to restore the Registry) if the XP GUI won't start?

In practise I suppose one should Ghost the NTFS partition. It is possible (so I believe) to restore this to an NTFS partition from plain DOS.

Interested in your comments on this. Can't sem to find any posts which really deal with this issue.

thanks
Prole
 

Relevancy 49.02%

I've had several bsods a day for about a week now They mostly occur when the system is left alone for even a few minutes but also when i'm playing a game mostly DooM Sometimes they are caused by ntfs sys sometimes the system kernel itself ntkrnlmp exe crashes I've attached all the dump files from c windows minidump here I've recently updated my pc and before the upgrade it was running fine and stable I'm guessing it has something to do related to and BSODs system kernel Random ntfs.sys with the parts i upgraded which were my graphics card from VTX D Radeon HD to XFX Radeon HD and my memory from two A-Data AD E GOU to four A-DATA AD U B G -B model sticks System specs System Windows Home Premium -bit Motherboard ASUS M N Processor AMD Athlon X Memory x A-DATA AD U B G -B GB DDR MHz Graphics Card XFX Radeon HD Black Edition HDD Samsung Spinpoint F quot TB RPM Random BSODs related to ntfs.sys and system kernel SATA Also here is what windbg found out about my latest ntfs sys related bsod Code MODULE NAME Ntfs FAULTING MODULE fffff nt DEBUG FLR IMAGE TIMESTAMP d d EXCEPTION RECORD fffff ea -- exr xfffff ea ExceptionAddress fffff b d Ntfs x d d ExceptionCode c Access violation ExceptionFlags NumberParameters Parameter Parameter ffffffffffffffff Attempt to read from address ffffffffffffffff CONTEXT fffff e f -- cxr xfffff e f rax rbx rcx ffdff a d c rdx rsi rdi fffff a d f rip fffff b d rsp fffff ea c rbp fffff ea r r r r r fffffa b c e r r r iopl nv up ei pl zr ac po nc cs ss ds b es b fs gs b efl Ntfs xd d fffff b d cmp qword ptr rax rcx rsi ds b ffdff a d c Resetting default scope DEFAULT BUCKET ID VISTA DRIVER FAULT BUGCHECK STR x CURRENT IRQL LAST CONTROL TRANSFER from fffff b to fffff b d STACK TEXT fffff ea c fffff b fffffa b c e fffff a d f fffff ea f Ntfs xd d fffff ea fffff a fffffa b c e fffffa aa d fffff a d f Ntfs x b fffff ea c fffff d a fffffa b c e fffffa aa d fffff a d f fffff a d c Ntfs xc fffff ea fffff fcf fffffa b c e fffffa aa d fffff ea fffffa b Ntfs xf a fffff ea fffff cb f fffffa aa d d fffffa aa d fffffa b d Ntfs x cf fffff ea e fffff c df fffffa e c fffffa aa d fffffa e fffffa aa d fltmgr FltIsCallbackDataDirty xa f fffff eaa fffff c c fffffa aa d fffffa b f fffff e fltmgr x df fffff eaad fffff e fffffa a fffffa a fffffa a d fffffa a nt IoPageRead x fffff eab fffff f fffffa b c fffffa aa fffff eac nt RtlCompareUnicodeString x fffff eabc fffff abed fffffa b c nt RtlCompareUnicodeString x fffff eac fffff f fb fffffa b f fffffa b f d nt IoGetAttachedDevice x d fffff eac fffff d fffff a fffff fffffa fffff b nt CcCopyRead x b fffff ead fffff d fffff a d f fffff eaf Ntfs xad fffff ead fffff fcf fffffa b c e fffffa b a fffff eaf fffffa aa c Ntfs xf fffff eaf fffff cb f fffffa b a b fffffa b a fffffa aa c Ntfs x cf fffff eafe fffff cd a fffffa ad fffffa aa c fltmgr FltIsCallbackDataDirty xa f fffff eb fffff da fffffa e c fffffa cd fltmgr FltPerformSynchronousIo x ca fffff eb fffff e fffffa cd fltmgr FltReadFile x fffff eb f fffff f fffffa ad fffffa aa c aswMonFlt x e fffff eb fffff d fffffa fae fffff eb fffff aswMonFlt x f fffff eb fffff cc fffffa b d aswMonFlt x d fffff eb fffff cb b fffffa cc fffffa fb fffffa ad b fffffa ad d fltmgr FltIsCallbackDataDirty x a fffff eb fffff ea b fffffa b fffffa cd fffffa b fffffa e c fltmgr FltIsCallbackDataDirty xb b fffff eb fffff d fffff d f fffffa b a fltmgr FltReadFile x e fffff eb fffff ccba fffffa c fad fffffa b ab nt SeUnlockSubjectContext x fffff eb d fffff d b d fffffa b ab fffff eba fffffa fffffa d nt SeQueryInformationToken x fffff eb d fffff d fffffa add cd fffffa b ab fffffa f nt ObOpenObjectByName x cd fffff eba fffff e cd e fffffa aa cd f nt SeUnlockSubjectContext x fffff ebb fffff d fffff f fffff ebca nt NtCreateFile x fffff ebbb ffc a nt KeSynchronizeExecution x a cd x ffc a FOLLOWUP IP Ntfs d d fffff b d cmp qword ptr rax rcx rsi SYMBOL STACK INDEX SYMBOL NAME Ntfs d d FOLLOWUP NAME MachineOwner IMAGE NAME Ntfs sys STACK COMMAND cxr xfffff e f kb BUCKET ID WRONG... Read more

A:Random BSODs related to ntfs.sys and system kernel

  
Quote: Originally Posted by cvmm69


I've had several bsods a day for about a week now. They mostly occur when the system is left alone for even a few minutes, but also when i'm playing a game (mostly DooM 3). Sometimes they are caused by ntfs.sys, sometimes the system kernel itself (ntkrnlmp.exe) crashes. I've attached all the dump files from c:\windows\minidump here.

I've recently updated my pc, and before the upgrade it was running fine and stable. I'm guessing it has something to do with the parts i upgraded, which were my graphics card (from VTX3D Radeon HD 5670 to XFX Radeon HD 6850) and my memory (from two A-Data AD2800E001GOU to four A-DATA AD2U800B2G6-B model sticks)
System specs:

System: Windows 7 Home Premium 64-bit
Motherboard: ASUS M2N
Processor: AMD Athlon X2 4200+
Memory: 4x A-DATA AD2U800B2G6-B 2GB DDR2 800MHz
Graphics Card: XFX Radeon HD 6850 Black Edition
HDD: Samsung Spinpoint F3 3,5" 1TB 7200RPM SATA2

Also, here is what windbg found out about my latest ntfs.sys related bsod:


Code:
MODULE_NAME: Ntfs

FAULTING_MODULE: fffff80003066000 nt

DEBUG_FLR_IMAGE_TIMESTAMP: 4d79996d

EXCEPTION_RECORD: fffff880061ea088 -- (.exr 0xfffff880061ea088)
ExceptionAddress: fffff8800141b11d (Ntfs+0x000000000000d11d)
ExceptionCode: c0000005 (Access violation)
ExceptionFlags: 00000000
NumberParameters: 2
Parameter[0]: 0000000000000000
Parameter[1]: ffffffffffffffff
Attempt to read from address ffffffffffffffff

CONTEXT: fffff880061e98f0 -- (.cxr 0xfffff880061e98f0)
rax=0000000000000000 rbx=0000000000000000 rcx=ffdff8a012d477c0
rdx=0000000000000000 rsi=0000000000000000 rdi=fffff8a012d476f0
rip=fffff8800141b11d rsp=fffff880061ea2c0 rbp=fffff880061ea660
r8=0000000000000000 r9=0000000000000000 r10=0000000000000000
r11=0000000000000010 r12=fffffa800b8c1e40 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei pl zr ac po nc
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010256
Ntfs+0xd11d:
fffff880`0141b11d 48393408 cmp qword ptr [rax+rcx],rsi ds:002b:ffdff8a0`12d477c0=????????????????
Resetting default scope

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

BUGCHECK_STR: 0x24

CURRENT_IRQL: 0

LAST_CONTROL_TRANSFER: from fffff88001414b68 to fffff8800141b11d

STACK_TEXT:
fffff880`061ea2c0 fffff880`01414b68 : fffffa80`0b8c1e40 fffff8a0`12d476f0 00000000`00000000 fffff880`061ea4f0 : Ntfs+0xd11d
fffff880`061ea430 fffff880`0141a092 : fffffa80`0b8c1e40 fffffa80`0aa8d430 fffff8a0`12d476f0 00000000`00000000 : Ntfs+0x6b68
fffff880`061ea5c0 fffff880`0141d2a6 : fffffa80`0b8c1e40 fffffa80`0aa8d430 fffff8a0`12d476f0 fffff8a0`12d475c0 : Ntfs+0xc092
fffff880`061ea790 fffff880`0141fcf8 : fffffa80`0b8c1e40 fffffa80`0aa8d430 fffff880`061ea901 fffffa80`079b4801 : Ntfs+0xf2a6
fffff880`061ea930 fffff880`012cb23f : fffffa80`0aa8d7d0 fffffa80`0aa8d430 fffffa80`079b48d0 00000000`00000000 : Ntfs+0x11cf8
fffff880`061ea9e0 fffff880`012c96df : fffffa80`091e42c0 fffffa80`0aa8d430 fffffa80`091e4200 fffffa80`0aa8d430 : fltmgr!FltIsCallbackDataDirty+0xa2f
fffff880`061eaa70 fffff800`030c80c2 : fffffa80`0aa8d450 fffffa80`0b883f20 00000000`00000403 fffff880`009e8180 : fltmgr+0x16df
fffff880`061eaad0 fffff800`03372e37 : fffffa80`0a869000 fffffa80`0a869000 fffffa80`0a8690d1 fffffa80`0a869010 : nt!IoPageRead+0x252
fffff880`061eab60 fffff800`03372f31 : fffffa80`0b8645c0 fffffa80`0aa86760 fffff880`061eac98 00000000`00000004 : nt!RtlCompareUnicodeString+0x677
fffff880`061eabc0 fffff800`0311abed : fffffa80`0b8645c0 00000000`00000000 00000000`00001000 00000000`00000000 : nt!RtlCompareUnicodeString+0x771
fffff880`061eac10 fffff800`033f07fb : 00000000`00000000 00000000`00000000 fffffa80`0b883f20 fffffa80`0b95f5d0 : nt!IoGetAttachedDevice+0x19d
fffff880`061eac70 fffff880`01418d50 : fffff8a0`00000000 fffff800`00000004 fffffa80`00040000 fffff880`0146b001 : nt!CcCopyRead+0x16b
fffff880`061ead30 fffff880`0141d083 : 00000000`00000000 fffff8a0`12d476f0... Read more

http://www.sevenforums.com/bsod-help-support/213994-random-bsods-related-ntfs-sys-system-kernel.html
Relevancy 49.02%

Hello,

I'm getting random BSODS mostly on startup and during casual browsing eg. tasks which isn't that demanding but also occasionally during gaming.

I've searched around but I'm still clueless and I hope somebody is more familiar with these error codes than I am. Trying to debugg these BSODS without much experience has proven pretty difficult.

I have done a two runs with Memtest without any errors.

Best regards,
Fredrik

A:Random BSODS, cause: ntoskrnl.exe, tcpip.sys, Ntfs.sys, dxgmms1.sys

Welcome to the forum.

Code:
BugCheck C8, {2, 0, 0, 0}
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+1e2e2 )
??????????????????????????????????????????????????????????????????????????????????????``
BugCheck C5, {fffff8100e81b6b0, 2, 0, fffff8000e7c0a4e}
Probably caused by : Pool_Corruption ( nt!ExDeferredFreePool+192 )
??????????????????????????????????????????????????????????????????????????????????????``
BugCheck D1, {41, 2, 1, fffff88001850c0e}
Probably caused by : memory_corruption
??????????????????????????????????????????????????????????????????????????????????????``
BugCheck 50, {fffff88048345f40, 0, fffff88001253c0a, 5}
Probably caused by : memory_corruption
??????????????????????????????????????????????????????????????????????????????????????``
BugCheck FC, {fffff880091739d0, 8000000399ed2963, fffff880091732d0, 2}
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+44dfc )
??????????????????????????????????????????????????????????????????????????????????????``
BugCheck C5, {fffff8100e8516b0, 2, 0, fffff8000e7f6a4e}
Probably caused by : Pool_Corruption ( nt!ExDeferredFreePool+192 )
??????????????????????????????????????????????????????????????????????????????????????``
BugCheck 1000007E, {ffffffffc0000005, fffff8800f0203cf, fffff880023717b8, fffff88002371010}
Probably caused by : dxgmms1.sys ( dxgmms1!VIDMM_GLOBAL::ProcessDeferredCommand+9cb )
??????????????????????????????????????????????????????????????????????????????????????``
Please follow the steps below:






Quote:
Based on the bugchecks, I would recommend you follow and complete the steps given below:1. If you are overclocking any hardware, please stop. Reset any changed values back to default and reset/clear CMOS: Clear CMOS - 3 Ways to Clear the CMOS - Reset BIOS. Uninstall any overclocking tool as these can also be a reason of blue screens.

2. Uninstall your current antivirus software. It can be a cause of BSOD very often. Please remove it with its removal tool and use Microsoft Security Essentials in its place. Malwarebytes is a great combination with it. Go through this thread for more info.

3. Run Disk Check with both boxes checked for all HDDs and with Automatically fix file system errors. Post back your logs for the checks after finding them using Check Disk (chkdsk) - Read Event Viewer Log

4. Run SFC /SCANNOW Command - System File Checker to check windows for integrity violations. Run it up to three times to fix all errors. Post back if it continues to show errors after a fourth run or if the first run comes back with no integrity violations.

5. Make scans with Kaspersky TDSskiller and ESET Online scanner.

6. Perform a Clean Start up, this will help avoid any problematic applications from bugging the system.

7. Use Revo Uninstaller Free to uninstall stubborn software. Opt for Advanced Mode and uninstall the software, delete the leftover registry entries.

8. Use Crystal Disk Info to upload a screenshot of your Hard Drives (s). Test your Hard Drives (s) running a Hard Drive Diag.

9. Test and Diagnose RAM issues with RAM - Test with Memtest86+. Pay close attention to Part 3 of the tutorial "If you have errors" Take the test for at least 7-10 passes. It may take up to 22 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold.

10. Monitor hardware temperature for overheating issues with system monitoring software like Speccy or HWMonitor. Upload a screen shot of the Summary tab as well:Piriform - Speccy
CPUID - HWMonitor



Update these drivers:

SSPORT.sys Fri Aug 12 05:07:32 2005 (42FBDA34)
Samsung printer driver
Driver Reference Table - SSPORT.sys

nusb3hub.sys Fri Dec 10 10:50:35 2010 (4D01B19B)
NEC Electronics USB 3.0 Host Controller Driver (previous BSOD issues with 2010 and earlier versions)
Driver Reference Tab... Read more

http://www.sevenforums.com/bsod-help-support/309546-random-bsods-cause-ntoskrnl-exe-tcpip-sys-ntfs-sys-dxgmms1-sys.html
Relevancy 48.59%

Hello there all My name is Adam and I am currently running a Dell Dimension E Windows XP Screen Death NTFS.sys error? Startup Blue Upon of - MCE GB HD Dual Core Ghz and Gig RAM For some reason this morning I woke up and turned on my computer It started up normally and went to the login screen where it froze before the quot Press Ctrl Alt Delete quot box appeared I set this up to do this instead of the welcome screen Anyway I was forced to do a hard restart This time the computer didn't even get to the login screen before it gave me the blue screen of death with the following error code Code Stop x x x A xC x I did some research and found that it said x is a NTFS Blue Screen of Death Upon Startup - NTFS.sys error? sys Blue Screen of Death Upon Startup - NTFS.sys error? problem I followed the steps and inserted my XP cd but wasn't even presented with the option for recovery console It just said quot Setup is loading files quot then it said quot Starting Windows quot and then continued through the process of starting up until I reached the Error message I can't even start up in safe mode I've tried everything I could find on the internet and am desperate and don't know what to do ANY help would be a life saver Thank You

A:Blue Screen of Death Upon Startup - NTFS.sys error?

Hello avsfilms

When booting from the XP installation CD first you must go into the BIOS and set the boot order to
floppy
CDROM
Hard disk
SAVE and EXIT

Then reboot and the CD should boot up properly.
Watch for "Press any key to boot from CD"

A couple of pages into setup select the first "R" you come to. This is ths Recovery Console.

At the command prompt type
chkdsk /r (there is a space before /)
Enter

http://www.techsupportforum.com/forums/f10/blue-screen-of-death-upon-startup-ntfs-sys-error-228629.html
Relevancy 48.59%

Hi

I'm trying to help a friend with a BSOD problem. I've looked at the minidump-file, but I'm not really sure what to look for...

There's no STOP in the file but there is the following warning:
WARNING: Stack unwind information not available. Following frames may be wrong.
81cf8740 00000000 81cf8748 81cf8748 81cf8750 nt+0x91048

Is there some information missing?

Before this started I helped him replace his noisy PSU and CPU fan and I really hope that I didn't cause the problem, but the timing isn't so encouraging. I'm thinking about switching back the PSU, but I thought I should ask here as a last resort.
 

A:Random BSOD on new computer

He... I thought the exported text file was the important one. Well, you learn something every day I guess

Here is the file I got. I see you write "files"... is one crash always producing several files?
 

http://www.techspot.com/community/topics/random-bsod-on-new-computer.102440/