Windows Support Forum

Random BSODs after upgrading to SSD

Q: Random BSODs after upgrading to SSD

Hi all, three weeks ago I bought a Kingston HyperX 3K 120GB SSD and a Seagate Barracuda 3TB. Installed Windows and all drivers again, and everything seemed too be working fine. However after a couple of hours I got multiple bluescreens in a short time(an hour or so). After that it worked fine for almost two weeks before I started getting them again.

I downloaded BlueScreenView and saw through the dumps, but I couldn't find any specific software or driver that caused the problem. Most of the time the cause was something different. I hope anyone can make some sense of all this.

Thanks in advance.

Relevancy 100%
Preferred Solution: Random BSODs after upgrading to SSD

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Random BSODs after upgrading to SSD

After reinstalling, how was your copy of windows activated?

http://www.sevenforums.com/bsod-help-support/306718-random-bsods-after-upgrading-ssd.html
Relevancy 70.52%

Hello everybody I have a Sager NP laptop which is essentially a rebranded Clevo B M I have had it for about a year and I have had no problems with it Recently I have decided upgrading 0x109) BSODs after Random my RAM (mostly to get a memory upgrade taking out the old RAMs and putting in new ones Since I put the new RAM in I started getting random BSODs One of them was B and the rest of them were They happen randomly about twice a week The rest of the time the laptop is running great I haven't figured out what activity can trigger the BSODs Here are details about the old and the new Random BSODs (mostly 0x109) after upgrading my RAM memory Old RAM GB x Apacer PC - CL DDR CL New RAM GB x Corsair CM X GSDKIT DDR CL My motherboard only supports DDR Even though the old RAM supported CL it ran at CL The old RAM was the original RAM that came with the laptop Also I didn't change any other parts in the laptop since I got it I ran Speccy AIDA and CPU-Z on the old configuration and the new configuration and I made screenshots and saved reports and I have uploaded them here https skydrive live com redir aspx BKN-uYY sdOQkI After getting the BSOD Windows prompted me to run Windows Memory Diagnostic I have ran that and it showed no errors I have also run Memtest for about one hour I got one pass for each of the tests excluding the bit fade test I also ran Memtest individually for each of the two sticks of RAM and it came up with no errors I also ran each test individually for about - minutes each I got no errors with memtest After i saw that I keep getting the BSODs I reinstalled Windows figuring that might fix it and I didn't get any more BSODs for about a week Then today I got another BSOD and I decided to post my dumps here Unfortunately I don't have the minidumps from before I reinstalled Windows but I will keep posting minidumps if I get any more BSODs Windows version Windows Professional x with SP and all the updates I got Windows for free from my University MSDN Academic Alliance I installed it and I have my own key and then I activated it online I bought the laptop without Windows included or preinstalled I bought the laptop in December I have had Windows installed since December and then I reinstalled it on December th I am using Microsoft Security Essentials Thanks for the help EDIT The cause of the BSOD was memory corruption due to a faulty RAM module

A:Random BSODs (mostly 0x109) after upgrading my RAM

These crashes were caused by memory corruption (probably a driver). Please run these two tests to verify your memory and find which driver is causing the problem.

If you are overclocking anything reset to default before running these tests.
In other words STOP!!!
1-Memtest. If you have run 5-6 passes you can skip this for now.




Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.



RAM - Test with Memtest86+

2-Driver verifier






Quote:
Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.


Driver Verifier - Enable and Disable
Further Reading
Using Driver Verifier to identify issues with Windows drivers for advanced users

http://www.sevenforums.com/bsod-help-support/205931-random-bsods-mostly-0x109-after-upgrading-my-ram.html
Relevancy 55.04%

Hello in random with processes Random random BSODs errors/bugchecks everyone I m stuck with a very frustrating BSOD problem and from the look of it it seems like some kind of harware failure Thing is I ve replaced almost everything but the BSODs refuse to go The BSODs are completely random but playing a current generation game Arkham Asylum GRID would guarantee a crash within an hour Mass Effect though runs for many hours at Random BSODs with random errors/bugchecks in random processes a stretch sometimes Analyzing my dumps told me that the crashes were totally random Page faults the irq not less than equal one the driver irq not less than equal one and the bugcheck codes were pretty random too Even the faulting processes were anything from ntoskrnl to npfs to my ati driver just about anything I like fixing my own problems plus I m impatient My temperatures were within limits so I assumed it was the RAM and got myself new corsair GB chips just to be sure Random BSODs with random errors/bugchecks in random processes But the BSODs continued So it s not the RAM the motherboard Graphic card and the PSU are brand new anyway The only thing left was the processor but they almost never go bad or so I thought The real clue was when one of the dumps was found to be corrupt by the debugger Reading up on that told me that it could be a processor issue So I borrowed a Xeon from a friend to test Well guess what The BSODs have almost gone At least I can work in peace now though the Xeon is painfully slow I say almost because I DID get one BSOD since I put the Xeon about a week back My friend tells me that I could have mismatched ram timings and that my old processor might not be at fault at all Route I need help I want to get rid of the Xeon and get something faster However how can I make sure that it was a processor issue in the first place Can you help me check my ram timings or whatever else it might be I still did get ONE BSOD even with the Xeon What if I get another processor but the BSODs continue I ve attached the last few minidumps The latest file is the one that happened with the Xeon I ll be so so grateful if someone can figure annything out from these dumps I have a feeling I ve spent a LOT of money on an otherwise easily fixable problem blackeye nbsp

A:Random BSODs with random errors/bugchecks in random processes

Your dumps came up with errors 0x8E / 0xD1 / 0xA etc. each dump citing different / random process being responsible for instance in question.

Such errors do and can occur due to mismatch RAM timings or incorrect voltage settings. I'll advise you to check specs of your (i.e. timings + voltage) and see whether settings in BIOS are correctly matching these.

Secondly, sometimes even the settings are matching you may still need to fiddle around with voltage settings (incrementally) and see whether that stabilize the system.

Lastly, do stress test your graphic card with OCCT, because one of the dumps came up with 0xc5 as 1st argument, which usually happen due to acceleration issues of graphics. Regards
 

http://www.techspot.com/community/topics/random-bsods-with-random-errors-bugchecks-in-random-processes.154392/
Relevancy 52.46%

Hey guys first post on here after about a week of solid research and forehead-to-screen bashing and a few months of increasingly more frequent issues trying to figure out what is wrong with this computer Here's the specs OS - Vista Home Premium SP x What crashes, KILL WANT random Multiple BSODs, hard freezing, random TO was original installed OS on system -Probably sometime in Here is what the computer originally was iBUYPOWER Gamer Gears of War Desktop PC - Newegg com iBUYPOWER Core Quad GB DDR Multiple BSODs, random hard freezing, random crashes, WANT TO KILL GB HDD Capacity Desktop PC Windows Vista Home Premium -bit Battle Gear X - Newegg com same one but has some feedback purchased All of the basic hardware is original except for the stuff listed in the Other Info section below Is the OS an OEM version came pre-installed on system or full retail version YOU purchased it from retailer -pre-installed in the computer IIRC Age of system hardware - Age of OS installation - have you re-installed the OS - No reinstall if memory serves me Multiple BSODs, random hard freezing, random crashes, WANT TO KILL right CPU -Core Quad Q Video Card -Sparkle GT SPARKLE SX GT D -HP GeForce GT GB -bit GDDR PCI Express x HDCP Ready SLI Support Video Card - Newegg com may possibly be a GB but I haven't looked at in a long time I'll double check tomorrow MotherBoard -P Q ASUS P Q LGA Intel P ATX Intel Motherboard - Newegg com Power Supply - brand amp wattage - watt I'll get specs on it tomorrow System Manufacturer -iBuyPower Exact model number if laptop check label on bottom -Gamer Gears of War or Battle Gear X same specs ordered back when it was called the Other Info Memory - GB Corsair XMS CORSAIR GB x GB XMS PC - DDR MHz CL - - - V SDRAM DIMM Non-ECC AVADirect Custom Computer Component HDDs -Boot drive Hitachi GST Deskstar K HDS KLA A GB RPM MB Cache SATA Gb s quot Hard Drive - Newegg com came with computer running since seems to me that it was listed as being rpm somewhere but maybe not -storage drive Western Digital WD Black WD FALS TB RPM MB Cache SATA Gb s quot Internal Hard Drive - Newegg com running since -storage drive Hitachi GST Deskstar HD IDK K S TB RPM MB Cache SATA Gb s quot Internal Hard Drive - Newegg com open box running since -storage drive Seagate Barracuda ST AS Internal Hard Drive - Newegg com running since Case -http www newegg com Product Product aspx Item N E Soundcard -http www newegg com Product Product aspx Item N E since CPU cooler Thermalright IFX- CPU Cooler at Xoxide running passive now had three scythe ultra kaze s on it when i had this processor maxed out at a GHz OC but bearings all burnt out and I've had all BIOS settings back to stock for a good year or so DVD drive ASUS Model DRW- B ST BLK B AS X DVD Burner - Bulk Black - Newegg com since Mouse -http www newegg com Product Product aspx Item N E Keyboard -http www ebay com itm Brand-New-in-Box-HP-PS- -Multimedia-Keyboard- - - - - - I've had this for probably years and it has outperformed gaming keyboards that I purchased at various points throughout that time to the extent that I returned all of them within a few days of receiving them Issues I've been having -Randomly freezes mouse and keyboard lights turn off HDDs silent computer unresponsive -BSODs or partially loaded UI then auto-shutdown upon waking computer from sleep from the night before -The other day it hard froze when copying a large amount of files from multiple HDDs onto my external hard drive which it's never done before -Today it BSOD'd at around optimizing defragging with Auslogics Disk Defrag -It's been randomly freezing and being an otherwise grumpy little b for a few months -Can't get into the User Accounts control panel menu without the computer auto-restarting no BSOD Haven't tried it in a couple of days though -others I can't think of at the moment Some Stuff I've done to try to fix it -I read somewhere that CPUCool messes with the drivers when installed and it can mess some stuff up I ha... Read more

Relevancy 52.46%

Hi folks Thought Windows random 7 - redirects, malware, random freezes browsing BSoDs, I may need to start a new thread I noticed Windows 7 - malware, random BSoDs, browsing redirects, random freezes other threads have similar issues to what I m seeing and didn t want to confuse by re-posting in the same thread I have Windows Enterprise and just started having many random windows blue screens I think it started as soon as I tried to run a trainer for a game Company of Heroes since McAfee said it was a trojan and I tried to restore it after seeing online by other folks that the file was legit Anyway since then I think i started to see many BSoDs not always the same BSoD message and they would occur during normal windows usage a few times in Safe mode with networking But most of the time usually within to min of running normally Anyways I ran the McAfee virusscan and it found a few viruses also ran spybot and malware bytes and Stinger I ran them from safe mode and was able to clean out the affected files I still see fewer BSoDs but mainly now my google chrome browser won t work I ve tried uninstall reinstall and every time I load it it never works sometimes freezes and I have to do a hard power off on on my laptop I have a lenovo w Other problems is that my windows randomly freezes Also so far I can use Internet Explorer and Firefox not able to install Opera But when using Firefox or IE i sometimes get random redirects I have ran hijackthis and can provide the log file I can also provide the windows minidump files Please help I greatly appreciate the help Regards

A:Windows 7 - malware, random BSoDs, browsing redirects, random freezes

Hello and Welcome to the forums! My name is Gringo and I'll be glad to help you with your computer problems. Somethings to remember while we are working together.Do not run any other tool untill instructed to do so!Please Do not Attach logs or put in code boxes.Tell me about any problems that have occurred during the fix.Tell me of any other symptoms you may be having as these can help also.Do not run anything while running a fix.We apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.Click on the Watch Topic Button and select Immediate Notification and click on proceed, this will help you to get notified faster when I have replied and make the cleaning process faster.In order for me to see the status of the infection I will need a new set of logs to start with.Please print out or make a copy in notpad of any instructions given, as sometimes it is necessary to go offline and you will lose access to them.DeFogger: Please download DeFogger to your desktop.

Double click DeFogger to run the tool.
The application window will appear Click the Disable button to disable your CD Emulation drivers Click Yes to continue A 'Finished!' message will appear Click OKDeFogger may ask you to reboot the machine, if it does - click OKDo not re-enable these drivers until otherwise instructed.Download DDS:Please download DDS by sUBs from one of the links below and save it to your desktop:
Download DDS and save it to your desktop

Link1
Link2
Link3

Please disable any anti-malware program that will block scripts from running before running DDS.

Double-Click on dds.scr and a command window will appear. This is normal.Shortly after two logs will appear:
DDS.txt Attach.txtA window will open instructing you save & post the logsSave the logs to a convenient place such as your desktopCopy the contents of both logs & post in your next replyScan With RKUnHookerPlease Download Rootkit Unhooker Save it to your desktop.Now double-click on RKUnhookerLE.exe to run it.Click the Report tab, then click Scan.Check (Tick) Drivers, Stealth,. Uncheck the rest. then Click OK.Wait till the scanner has finished and then click File, Save Report.Save the report somewhere where you can find it. Click Close.Copy the entire contents of the report and paste it in a reply here.Note** you may get this warning it is ok, just ignore"Rootkit Unhooker has detected a parasite inside itself!It is recommended to remove parasite, okay?""just click on Cancel, then Accept".information and logs:In your next post I need the following

.logs from DDSlog from RKUnHookerlet me know of any problems you may have hadGringo

http://www.bleepingcomputer.com/forums/t/375946/windows-7-malware-random-bsods-browsing-redirects-random-freezes/
Relevancy 52.46%

Since Feb to today Feb I've been getting Blue Screens these appear to be completely random each time with different stop codes and according to Blue Screen Veiw are caused by different files For example Caused by ntkrnlpa exe or atikmdag exe or ks sys or USBPORT SYS or dxgkrnl sys or dxgmms sys At times I'm unable to do anything on the my PC as these are known to happen before Windows logs me in Attached the Blue Screen View records of the BSODs trying BSODs Files with Differing Codes Random Stop by Random Caused to figure out how to open dmp up to Feb Most recently it was the ks sys that caused the BSOD but Random BSODs Caused by Random Files with Differing Stop Codes no file was created nor does it appear in Blue Screen View I know what these files are rooted to but neither Windows Update nor any driver update has solved the issue hence my post here Activity on the PC doesn't Random BSODs Caused by Random Files with Differing Stop Codes seem to be a factor as the BSODs have occurred while I've been playing games watching DVDs listening to MP s browsing the web editing pictures on the PC I can do anything and at some point a BSOD is guaranteed to happen They also occur randomly as yesterday Feb I was able to play games until and then I was unable to log back into Windows because Random BSODs Caused by Random Files with Differing Stop Codes of back to back BSODs while the day before I was unable to do much because of the frequency of the BSODs I've installed and re-installed a dozen times over and run the updates and done disk scans and defrags and virus scans and run Windows System Repair and nothing has helped I'm at my wits end here and don't know what else to do I suspect it could be hardware faults as my PC is at least years old

A:Random BSODs Caused by Random Files with Differing Stop Codes

If you performed the above task then my guess is it may be hardware related, When you mentioned Re-installed are you refering to the operating system? If so have you deleted the old Partition and recreated a new one prior to installing windows?

http://www.sevenforums.com/bsod-help-support/279625-random-bsods-caused-random-files-differing-stop-codes.html
Relevancy 52.03%

Hey folks.

Acer AS4830TG-6808
Win7 Home Premium x64 Acer OEM
Machine is less than a month old
Added 4GB Ram stick (PNY, now total of 8GB)

Have been getting random BSODs over the last week or so. I'm not sure of the reasoning, however I suspect it may be gaming related. Errors began while running Call of Duty MW3 via Steam, now they've gotten out of hand - random crashes during normal, non-gaming related tasks. I'm just not sure at this point what's going on (after much Googling). Any help is appreciated - ask away with questions for me... I like to think I'm pretty savvy.

Thanks in advance everyone!!

A:Random BSODs during random tasks. Latest error: 0x1000007e

You have a lot of software running that is probably not necessary. Troubleshoot Application Conflicts by Performing a Clean Startup and only have avast! set to run on startup and in services.

Regarding avast!, your current installation may be corrupted or old; avast! was blamed in a few of your crashes. I would suggest uninstalling with the avast! uninstall utility, downloading a fresh, up to date copy, and then installing the fresh copy. If that does not resolve the avast! related crashes, I may ask you to remove it with the avast! uninstall utility and replace it with Microsoft Security Essentials - Free Antivirus for Windows to test.
Post a screenshot of what you have in device manager under IDE ATA/ATAPI controllers (Start Menu -> Control Panel -> Hardware and Sound -> Device Manager)
Many of your crashes were DirectX/graphics card related. DirectX comes installed with Windows, so this may indicate Windows corruption. It may also be that you have corrupted drivers or a graphics card hardware problem.
If you are overclocking any hardware, please stop.

Check Windows for corruption. Run SFC /SCANNOW Command - System File Checker up to three times to fix all errors with a restart in between each. Post back if it continues to show errors after a fourth run or if the first run comes back with no integrity violations. Use OPTION THREE of SFC /SCANNOW Command - System File Checker to provide us with the sfcdetails.txt file if errors occur.
Follow the steps for Diagnosing basic problems with DirectX. To re-install your display card drivers as outlined in the DirectX link, use the following steps.
Download the drivers you want for your display card(s)
Click Start Menu
Click Control Panel
Click Uninstall a program
For NVIDIA:Uninstall the NVIDIA Graphics Driver (this should uninstall all NVIDIA software and drivers)
Restart your computer
Make sure NVIDIA 3D Vision Driver, NVIDIA 3D Vision Video Player, NVIDIA HD Audio Driver, and NVIDIA PhysX System Software are not still listed under Uninstall a program through Control Panel
If any remain of the above, uninstall one at a time
If asked to restart after uninstalling any of the above, do so, and continue uninstalling any remaining NVIDIA items until all are removed

For AMD:Uninstall AMD Catalyst Install Manager if it is listed (this should remove all AMD graphics software and drivers)
If AMD Catalyst Install Manager is not listed, use the following method to uninstall the graphics drivers (this applies to onboard graphics, as well):Click Start Menu
Right Click My Computer/Computer
Click Manage
Click Device Manager from the list on the left
Expand Display adapters
Do the following for each adapter (in case you have multiple display cards)Right click the adapter
Click Uninstall (do not click OK in the dialog box that pops up after hitting Uninstall)
Put a tick in Delete driver software for this device (if this option is available, otherwise just hit OK) and hit OK

Alternatively:Login as an adminstrative user
Click Start Menu
Click Control Panel
Click Hardware and Sound
Click Device Manager (the last link under Devices and Printers)
Expand Display adapters
Do the following for each adapter (in case you have multiple display cards)Right click the adapter
Click Uninstall (do not click OK in the dialog box that pops up after hitting Uninstall)
Put a tick in Delete driver software for this device (if this option is available, otherwise just hit OK) and hit OK

Restart your computer after uninstalling drivers for all display cards
Install the driver you selected for the display cards once Windows starts

http://www.sevenforums.com/bsod-help-support/232626-random-bsods-during-random-tasks-latest-error-0x1000007e.html
Relevancy 51.6%

Getting random BSODS from 5 times a week to 2 times a week to 0 times a week its really random and i hope the files can describe the issue.

A:Random BSODs with random intervals (have files from SF diagnostics)

Hi justicar.

Uninstall Panda Free Antivirus using the tool supplied here.

Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.

Let us know for any further BSOD.
______________________________________

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 50, {fffff8a0120b202c, 0, fffff88006643be0, 0}

*** WARNING: Unable to verify timestamp for NNSStrm.sys
*** ERROR: Module load completed but symbols could not be loaded for NNSStrm.sys

Could not read faulting driver name
Probably caused by : NNSStrm.sys ( NNSStrm+36be0 )

Followup: MachineOwner
---------

1: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced. This cannot be protected by try-except,
it must be protected by a Probe. Typically the address is just plain bad or it
is pointing at freed memory.
Arguments:
Arg1: fffff8a0120b202c, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffff88006643be0, If non-zero, the instruction address which referenced the bad memory
address.
Arg4: 0000000000000000, (reserved)

Debugging Details:
------------------
Could not read faulting driver name

READ_ADDRESS: GetPointerFromAddress: unable to read from fffff80003303100
GetUlongFromAddress: unable to read from fffff800033031c0
fffff8a0120b202c Paged pool

FAULTING_IP:
NNSStrm+36be0
fffff880`06643be0 488b040a mov rax,qword ptr [rdx+rcx]

MM_INTERNAL_CODE: 0

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

BUGCHECK_STR: 0x50

PROCESS_NAME: System

CURRENT_IRQL: 0

ANALYSIS_VERSION: 6.3.9600.17237 (debuggers(dbg).140716-0327) amd64fre

TRAP_FRAME: fffff880009d76e0 -- (.trap 0xfffff880009d76e0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=000007fffff60000 rbx=0000000000000000 rcx=000007fffff60000
rdx=fffff0a01215202c rsi=0000000000000000 rdi=0000000000000000
rip=fffff88006643be0 rsp=fffff880009d7878 rbp=fffffa8006ee88e4
r8=000000000000005a r9=0000000000000002 r10=fffff880009d7518
r11=000007fffff60000 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei ng nz na pe cy
NNSStrm+0x36be0:
fffff880`06643be0 488b040a mov rax,qword ptr [rdx+rcx] ds:fffff8a0`120b202c=????????????????
Resetting default scope

LAST_CONTROL_TRANSFER: from fffff80003149bf0 to fffff800030cbbc0

STACK_TEXT:
fffff880`009d7578 fffff800`03149bf0 : 00000000`00000050 fffff8a0`120b202c 00000000`00000000 fffff880`009d76e0 : nt!KeBugCheckEx
fffff880`009d7580 fffff800`030c9cee : 00000000`00000000 fffff8a0`120b202c 00000000`00000000 fffff8a0`0b2eca74 : nt! ?? ::FNODOBFM::`string'+0x4518f
fffff880`009d76e0 fffff880`06643be0 : fffff880`0662b20d 000007ff`fff60000 fffff8a0`0b2eca74 00800000`00102000 : nt!KiPageFault+0x16e
fffff880`009d7878 fffff880`0662b20d : 000007ff`fff60000 fffff8a0`0b2eca74 00800000`00102000 00000000`00000000 : NNSStrm+0x36be0
fffff880`009d7880 000007ff`fff60000 : fffff8a0`0b2eca74 00800000`00102000 00000000`00000000 fffff880`06649148 : NNSStrm+0x1e20d
fffff880`009d7888 fff... Read more

http://www.sevenforums.com/bsod-help-support/348930-random-bsods-random-intervals-have-files-sf-diagnostics.html
Relevancy 51.6%

Hi all first off thanks for reading this Basically my current build is about - years old the newest thing being my PSU which I replaced after several issues with the GPU drivers constantly crashing turns out it wasn't the power anyway For the past few weeks I've been having issues with it At one point the computer refused to start it would power up but the k b and mouse lights wouldn't turn on I seem to have solved it by moving my RAM slot looks to be buggered I kept random BSODs, messages. Random times, error on getting BSODs at random times and different messages I could be playing watching a movie or even letting it sit idle and it'd BSOD Temps for both the CPU and GPU are fine GPU hits about and CPU tops off at roughly C when stress testing I tried running Prime Furmark no crash funnily enough BSODs, Random times, random error messages. Done the RAM tests passes BSODs, Random times, random error messages. on both sticks no issues The error messages I've gotten are Bad Pool Header Memory Management System Service Exception The most frequent one is the Memory Management one I'm at my wit's end here I've updated my Mobo drivers GPU etc I'm hoping that someone might be able to make heads or tails of the problem and give me an idea of what to do

A:BSODs, Random times, random error messages.

Forgot to attach the dumps. Here are the most recent dumps.

The one labeled "Dumps" are just the minidumps I pulled directly from the folder.

The second one is the log created by that DM Log Collector program.

http://www.sevenforums.com/bsod-help-support/332576-bsods-random-times-random-error-messages.html
Relevancy 51.6%

For some reason my last post during numerous Random BCCodes. random BSODs tasks, here regarding this issue was deleted after days without warning or response Random BSODs during random tasks, numerous BCCodes. from anyone so here I am again now that I can view this section once more For the past week or so now my PC has been randomly BSODing at seemingly random times mostly when gaming Before the BSODs started happening I believe a day or so Windows removed some orphaned files from the drive before starting I don't know if this has anything to do with what's going on or not When gaming more often than not I'll suffer from crashes due to access violations the errors stating that the memory couldn't be read From this point either I get a BSOD very shortly after or immediately when doing something like checking the computer properties to see perhaps if Windows had suddenly decided one of my sticks of RAM was bad and displayed as quot XGB of RAM XGB usable quot At this point in this PC's life I'm chalking it up to probably failing hardware I recently had to disable Intel's SpeedStep on this processor as I was having issues where it wouldn't initialize like it should and clock my CPU up to load-levels thus leaving the system and anything I did with it a tad laggy Until that point it had been enabled since I built this PC and I had no problems with it whatsoever As far as temperatures and voltages are concerned all are well I monitor temps as closely as I can and I'm not overclocking Power from my PSU is all normal The only drivers I've messed with lately today are the video drivers which I updated to the latest version Nothing else involving drivers or other major software had been changed or messed with prior to the BSODs I've taken out the RAM and tested each stick individually in each slot and it booted to Windows just fine in every configuration I've ran both Memtest and the Windows memory diagnostic both have found nothing I've ran chkdsk f and it too found nothing So I'm pretty much at a loss as to what's going on here unless it's a failing CPU motherboard or some weird memory issue I can't isolate or replicate Also worth noting before I tested the RAM like I did I'd just taken it out and reseated it The PC ran just fine for about a day then started BSODing again Once I tested it all like that it again ran fine until a little while ago a span of about days this time This BSOD made no mention of any files I'd noticed win k sys in one of the prior BSODs and a different file before it but they seem random and had a BCCode of which all google searches pointed towards a filesystem hard drive problem but after that is when chkdsk found no errors problems At this point I'm leaning more towards potential hardware failure than anything This system is pushing years old this coming March and as much as it's been used it just wouldn't surprise me if it was hardware Anyway Attached is the SFDT zip file with all the necessary files included Thanks in advance and sorry for the massive post I'm trying to include as much information as possible PS If for some reason an admin moderator here feels the need to delete my thread for whatever reason my previous thread is still available in the Google cache the zip file I'd included had view before it was deleted without warning or word from anyone at least have the decency to send me a message as to why this time Thank you

A:Random BSODs during random tasks, numerous BCCodes.

Your .zip file doesn't contain any of the .dmp files required to analyse the BSOD/s.

Please follow this:
Dump Files - Configure Windows to Create on BSOD

Now follow this:
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.
Driver Verifier - Enable and Disable

Driver Verifier will cause your computer to run very sluggishly - this is normal. What it is trying to do is force your system to BSOD and isolate the offending driver/s. When it does, reboot, disable driver verifier, reboot as normal and upload the new dmp file/s here.

I recommend creating a system restore point before turning on driver verifier:
System Restore Point - Create

If your system fails to boot to desktop once driver verifier is enabled, turn it off by booting into Safe Mode:
Safe Mode

Once you get a new BSOD when running Driver Verifier, follow this:

1. Download the DM Log Collector application to your desktop by clicking the link below

DM Log Collector.exe

2. Run it by double-clicking the icon on your desktop, and follow the prompts.
3. Locate the .ZIP file that is created on your desktop, and upload it here in your next reply.

http://www.sevenforums.com/bsod-help-support/354337-random-bsods-during-random-tasks-numerous-bccodes.html
Relevancy 51.6%

Hi everybody I wonder if everybody had similar problem before and found the solutions the problem Here what happened Upgrading memory to MBX MB on my HP Pavilion C I used to have MB and MB modules on both available slot and the computer just worked find Replaced the MB with MB RAM stick both modules are PC and strange things happening Memory/RAM restart & quit Random Program after upgrading Random the system randomly restarts itself or programs just quit without warning or sometimes quit with error messages I ran the memory test with both modules on socket and they failed the stride wmats and wstride First I thought the new module was bad but either memory passed all tests when installed ALONE not in pair The computer runs just fine with only one module in first socket I Random restart & Random Program quit after upgrading Memory/RAM did not try to install only one memory in nd socket worried to screw up everything I ve tried to reinstall the memory with CMOS reset but the problem persisted Everything in my computer is updated driver and BIOS PhoenixBIOS I tried to disable the Legacy USB Support when running the memory test but it did not help Does anybody have an idea what s wrong with my computer My computer specs HP Pavilion C http h www hp com ewfrf wc n lang en amp cc us amp lc Random restart & Random Program quit after upgrading Memory/RAM en amp dlc en amp docname bph Athlon Mhz AMD Irongate AMD- Chipset Phoenix Bios Latest update from HP site I believe it has ASUS motherboard MB RAM Windows SP NVIDIA Vanta MB AGP Everything else remains factory standard The VIO setting is the original factory setting pin amp -- gt V Thanks Jung nbsp

Relevancy 51.17%

I get a lot of pagefile errors. Sometimes these will occur when the computer sits idle for a while, sometimes it happens when I'm downloading quite a bit of data (updated Star Citizen [~35 gigs] and it blue screened twice).

I've been working for weeks to try to diagnose this issue, but everything I've tried seems to have no effect.

I've moved the pagefile from my SSD to my HDD. I've tried different network drivers (there are technically no official Win 10 drivers for my NIC). The first seemed to have slowed down the crashes; at one point my computer was crashing every 30 minutes or so, now it's maybe once a day.

Other issue I've seen: after a crash, if I allow the system to do a warm reboot, my SSD will not be detected. I have to completely power off the computer and turn it back on to get it to boot properly. I have 5 dump collections.

A:BSODs after upgrading to Windows 10

Hi lighti3ulb,

Welcome to the 10forums.

I have looked at the dumps present in the zip, 2 of them have gotten my attention.
The 0x12B and 0x7A are the onces I find interesting, the 0x12B is a crash usually caused by the memory and the 0x7A as you say is a process having problems with getting access to an object.
The 0x7A is caused by a Microsoft driver, but the details from the dump say something else.
Driver Reference Table - Msfs.SYS
Please read me suggestions below carefully

Code:
*** WARNING: Unable to verify timestamp for Msfs.SYS
*** ERROR: Module load completed but symbols could not be loaded for Msfs.SYS
2: kd> lmvm Msfs
start end module name
fffff801`7e120000 fffff801`7e12f000 Msfs T (no symbols)
Loaded symbol image file: Msfs.SYS
Image path: Msfs.SYS
Image name: Msfs.SYS
Timestamp: unavailable (00000000)
CheckSum: 00000000
ImageSize: 0000F000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4


Diagnostics Test

 Malware scan

Please run a threat scan with Malwarebytes*, a full scan with your AV, scan your system with Adwcleaner, Kaspersky TTDSKiller, ESET Online Scanner and SuperAntiSpyware

   Note
*(Uncheck trial version in the installation process)



Diagnostics Test

 System File Check

Please try following:
Open an admin command promptCopy/paste "sfc/scannow" (without quotes) and press enterWhen it finished reboot your systemOpen again an admin command promptEnter sfc/scannow again
If sfc/scannow does NOT say "Windows Resource Protection did not find any integrity violation" after the second SFC, please upload the cbs.log file located at {windows partition}\Windows\Logs\CBS\, if the file is too large try a 3rd party uploader like dropbox, onedrive, google drive, mediafire etc.
System File Check(SFC a.k.a. Windows Resource Protection) needs to have your system rebooted in order for sfc to try to fix the problems that it finds.



Diagnostic Test

 RAM TEST

Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums


   Note


MemTest86+ needs to be run for at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.

http://www.tenforums.com/bsod-crashes-debugging/33640-bsods-after-upgrading-windows-10-a.html
Relevancy 50.74%

Hello

3 months ago I bought an XPS M1530 laptop. It's great, except that I get BSODs 2 times a week or more. I first thought it was a software error, but it is more likely a hardware error since it occurs on xp and vista with official drivers.

I get random BSODs (0x000000A, 0x0000008E, 0x000000D1, ...) reffering to different system files (sthda.sys, USBport.sys, video driver, ...) at random times. I have several dump files. Is it possible to upload them on this forum and have someone have a look at them?

Might this be a HDD error? I'm having my HDD replaced soon, since it makes strange noices. I checked my memory with memtest. Once it found an error, but since it was an old version I tried it with the latest version of Memtest; since then, no errors have been found.

I suspect it to be: 1) HDD, 2) Memory, 3) Mobo

Any help would be appreciated!

Gilles

A:Random BSODs referring to random .sys files

No one?
I'm speaking to Dell tomorrow to replace the HDD.

http://www.techsupportforum.com/forums/f10/random-bsods-referring-to-random-sys-files-261287.html
Relevancy 50.74%

I recently built a new desktop PC running a clean install of Windows Ultimate -bit retail version see my system specs All hardware was purchased new and all software installed were fresh installs All Windows Updates were applied successfully including SP I have also Random Firefox BSODs; crashes 4 random updated all drivers using manufacturer supplied drivers online as well as through Windows Update BIOS is flashed to latest manufacturer version and RAM timings were tightened to rated specs default - - - at V rated for - - - at V After using my system for a day or two I started getting frequent Firefox application crashes several times a day These manifested themselves by abruptly exiting out of Firefox and bringing up the Crash Report manager no freezing up or unresponsiveness of any sort was involved I am using Firefox with no third-party add-ons except for Random BSODs; Firefox 4 random crashes AdBlock Plus I also received several BSOD's three I believe one of which is MEMORY MANAGEMENT x A The BSOD's occurred randomly while browsing or doing other tasks and did not appear to be triggered by any given event My uTorrent application also crashed once not long after a Firefox crash but this was a one-time event I have run memtest for one pass on each of my sticks of ram individually and passes on the two sticks together with no errors This is my first time building a PC and I have previously only used Windows -bit Since all of the hardware is new I am wondering whether there could be a hardware issue or whether the root cause is software-related Any help suggestions would be appreciated

A:Random BSODs; Firefox 4 random crashes

  
Quote: Originally Posted by Klarerwind


I recently built a new desktop PC running a clean install of Windows 7 Ultimate 64-bit retail version (see my system specs). All hardware was purchased new, and all software installed were fresh installs. All Windows Updates were applied successfully, including SP1. I have also updated all drivers using manufacturer supplied drivers online as well as through Windows Update. BIOS is flashed to latest manufacturer version, and RAM timings were tightened to rated specs (default 9-9-9-24 at 1.5V, rated for 7-7-7-21 at 1.5V).

After using my system for a day or two, I started getting frequent Firefox application crashes (several times a day). These manifested themselves by abruptly exiting out of Firefox and bringing up the Crash Report manager; no freezing up or unresponsiveness of any sort was involved. I am using Firefox 4 with no third-party add-ons except for AdBlock Plus. I also received several BSOD's (three, I believe), one of which is MEMORY_MANAGEMENT (0x1A). The BSOD's occurred randomly while browsing or doing other tasks, and did not appear to be triggered by any given event. My uTorrent application also crashed once not long after a Firefox crash, but this was a one-time event.

I have run memtest86+ for one pass on each of my sticks of ram individually, and 5+ passes on the two sticks together, with no errors. This is my first time building a PC, and I have previously only used Windows 7 32-bit. Since all of the hardware is new, I am wondering whether there could be a hardware issue, or whether the root cause is software-related. Any help/suggestions would be appreciated.


Well both crashes were memory related and since the machine uptime was over 5 hours for both I suspect it is software related. Memtest tests outside of the windows environment and so is only testing the ram and mobo itself, not the way it is working in windows.

To be really accurate memtest should be run on each stick and in each slot for 5 or more passes ( takes a long time I know)

The fact you are running utorrent doesnt exactly instill confidence in me for it is by nature buggy, but I am still placing my bet on the ram

In order to find if there is a driver within windows causing you grief you should run driver verifier






Quote:
I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore f... Read more

http://www.sevenforums.com/bsod-help-support/157128-random-bsods-firefox-4-random-crashes.html
Relevancy 50.31%

Hi I recently upgraded my system to after BSODs Multiple [SOLVED] 8 to upgrading Win Win Pro and from then on I have been getting multiple BSODs I performed a clean install over the previous OS Earlier I had the Win Enterprise evaluation edition which worked well for me during the evaluation period But from the day I installed this I have been getting BSODs like anything Please find my details also below OS - Windows Pro x What was original installed OS on system - Windows Home Edition Is the OS an OEM version came pre-installed on system or full retail version YOU purchased it from retailer - Windows was an OEM Windows is full retail version Age of system hardware - months [SOLVED] Multiple BSODs after upgrading to Win 8 Age of OS installation - current one nearly a week CPU - i - Video Card - Nvidia Geforce GT m System Manufacturer - Dell Exact model number if laptop check label on bottom - Inspiron n I hope the data provided above is sufficient Pls do let me know if I need to put in anymore data

A:[SOLVED] Multiple BSODs after upgrading to Win 8

Recommendations:
Please remove TuneUp Utilities 2013. I do not recommend that software or any 3rd party optimization software in general, but especially with Windows 8. Windows 8 is fairly new, so no optimization software will have been properly tested with it at this early a date. I do not recommend automated optimization tools for Windows. Windows 7 and 8 do a much better job of handling their own optimization than their predecessors did. We especially do not recommend registry cleaning as an "optimization" step because automated registry cleaning causes more harm to the registry than it actually repairs.

In the future, if you need help optimizing Windows 7 or Windows 8, please follow the steps to Optimize Windows 7 for better performance. The steps will be slightly different in Windows 8, but the ideas behind them still apply.


Crashes point primarily to a hard drive related problem. This could mean hard disk corruption, bad sectors, a failing hard disk, Windows files or registry corruption, viruses, or memory problems.If you are overclocking any hardware, please stop.

Run Disk Check with both boxes checked for all HDDs and with Automatically fix file system errors checked for all SSDs. Post back your logs for the checks after finding them using Event Viewer. In Event Viewer, expand Windows Logs, click Application to let it load, right click Application and click Find.... Search for chkdsk or wininit to find the logs.
For any drives that do not give the message: Windows has checked the file system and found no problemsrun disk check again as above. In other words, if it says: Windows has made corrections to the file systemafter running the disk check, run the disk check again.

Run all Basic tests with SeaTools: S.M.A.R.T. Check, Short Drive Self Test, Drive Information, Short Generic, and Long Generic. Run the tests for all HDDs.SeaTools for Windows

SeaTools for DOS
If you have an SSD, make sure the following are up to date:SSD firmware
BIOS Version
Chipset Drivers
Hard disk controller drivers/SATA drivers
If you have a Marvell IDE ATA/ATAPI device, make sure the drivers are up to date from the Intel site or Marvell site and not from your motherboard/vendor support site.

Run a system file check to check Windows for corruption: Click Start Menu
Click All Programs
Click Accessories
Right click Command Prompt
Click Run as administrator
Type
Code:
sfc /scannow
and press Enter
Once it is complete, make note of the message. If it says Windows Resource Protection did not find any integrity violations., restart your computer and post back
If the message does not say Windows Resource Protection did not find any integrity violations., restart your computer and do steps 1-6 again.
You may need to do steps 1-6 up to three times with a restart in between each run to resolve all corrupted files.
If you still have corrupted files after a fourth run, post back here with the following:Click Start Menu
Click Computer
Open your C: drive
Open Windows
Open Logs
Open CBS
Copy and paste CBS.log or CBS (it may not have the log extension) to a location you will remember.
Compress (zip) the CBS file and attach the .zip file to your next post.
Download and install Malwarebytes, update it, do not start the free trial, and then run a full scan. Also run a full scan with your antivirus software installed on your system. If you do not have antivirus software installed, I recommend:Microsoft Security Essentials - Microsoft Windows coupled with Malwarebytes. Do not start the free trial of Malwarebytes. Just use the standalone version, update it, and scan your computer once a week with Malwarebytes and with Microsoft Security Essentials.
Make sure to update the security software before running the full scan.

Run Memtest86+ for at least 7-10 passes. It may take up to 22 passes to find errors. You should also run it once when the system has been on for a few hours and is warm, and then run it again once the syste... Read more

http://www.techsupportforum.com/forums/f299/solved-multiple-bsods-after-upgrading-to-win-8-a-676839.html
Relevancy 49.88%

Hi I recently upgraded my CPU and Motherboard to an Intel i k and Gigabyte GA-Z -HD respectively This was around the th December so BSODs prior to this were a problem which I have since resolved The blue screens occur at no specific time and seem to have a different bug check code every time they hardware upgrading various with bug check BSODs codes after occur although some are repeated just not consecutively I have tried to resolve the issue by changing some settings BSODs with various bug check codes after upgrading hardware in the BIOS I can't recall which ones BSODs with various bug check codes after upgrading hardware exactly but with no avail The only other piece of hardware added changed since this started to occur is a headset Creative Tactic d Rage although the blue screens occurred before this was added I have also tried BSODs with various bug check codes after upgrading hardware removing any old AMD drivers the motherboard CPU I upgraded from were both AMD rather than Intel in case of conflicting drivers but still with no change When the issues initially started to occur I tried to apply a hotfix from Microsoft but this made no difference The SF diagnostic tool output is attached any help would be greatly appreciated Thanks in advance

A:BSODs with various bug check codes after upgrading hardware

  
Quote: Originally Posted by daviga404


I have also tried removing any old AMD drivers (the motherboard/CPU I upgraded from were both AMD, rather than Intel) in case of conflicting drivers, but still with no change


Did you not do a clean install when you got the new motherboard? Did you simply plug in your HDD into the new motherboard and boot?

http://www.sevenforums.com/bsod-help-support/319802-bsods-various-bug-check-codes-after-upgrading-hardware.html
Relevancy 49.88%

Hi I recently upgraded my brand new HP desktop with a new video card and power supply For the last several days I have been getting multiple crashes and BSODs and I have no idea what's causing them All my drivers are up to date and I'm not getting any heat problems that I can see the case isn't hot and the video card isn't blowing hot air out the back The BSODs are most after Frequent upgrading card BSODs video common after midnight but I've gotten them in the middle of the day too They have happened both when I'm actively using the computer surfing the web mostly and when I've been away doing other things I've attached a perflog and my crash dumps though I couldn't figure out how to save those as text files Here are my Frequent BSODs after upgrading video card system specs as best as I can answer them OS - Windows Home Premium x Windows Home Premium Pre-installed Age of system hardware Less than months I have not reinstalled the OS AMD Athlon tm X Processor GHZ Video Card HIS H QR GH Radeon HD GB -bit DDR new install MotherBoard- Power Supply - Rosewell W new install System Manufacturer--HP Exact model number-- p f

A:Frequent BSODs after upgrading video card

24 hours after my initial post I have had four BSODs in the Spanish of 20 minutes. The first came while playing Wow; screen went pixellated and Windows restarted. During reboot I ran the memory diagnostic, but no problems were detected.

Second crash happened roughly 5 minutes later as I tried to play WoW again. Same kind of crash as the first. Giving up on WoW for the time being, I loaded this forum. While reading up on how to run the driver verifier, I got a BSOD that mentioned a driver being not or less equal or something.

This time I rebooted in Safe Mode and was following a prompt on the diagnostics I could run in Safe Mode when I got another BSOD with a message I didn't recognize. I then got a message saying that Windows had failed to start up. I followed the recommend prompt, but now Windows is failing to start up. Right now my screen is black save for a progress bar that has settled into an infinite loop.

*** is going on?!

PS: posting from my iPhone.

http://www.techsupportforum.com/forums/f299/frequent-bsods-after-upgrading-video-card-586717.html
Relevancy 49.02%

Hi I'm experiencing some difficulties with my hp at Random random BSODs appearing laptop Some of my system specs are System manufacturer Model Number Hewlett-Packard HP Pavilion dv Notebook PC Random BSODs appearing at random CPU core i CPU Q GHz cores Logical processors gb RAM Graphics card is an ATI Mobility Radeon HD My Sound Device is ATI High Definition Audio Device My Os is Windows Home Premium bit It was already installed when I bought it I bought this laptop last december The drive I use the most is Drive C Description Local Fixed Disk Size GB bytes Free Space GB bytes Volume Name OS Volume Serial Number CA D C My problem is that for the last two months or so a lot of BSODs have been appearing At first they only appeared when I was trying to shut down my computer The most frequent stop error causing the BSODs was STOP ERROR X it said something about some problem with the ntfs sys file and that I should run chkdsk I did indeed run chkdsk and it said that 'the volume is clean' which I interpret as my hard drive working just fine However that hasn't been the only stop error connected to the BSODs some of the other BSODs were concernin stop errors x E and X B At first BSODs would appear sometimes when trying to shut my computer down but now it's become totally random Sometimes I'm just listening to music and the computer makes this awful noise and the BSODs appear Sometimes I just leave it on and don't do anything and the BSODs appear The other day one appeared when trying to troubleshoot my audio device and sometimes they appear when i'm opening a folder or surfing the net I really don't know what to do I have tried uninstalling software such as firefox google chrome jdownloader winamp virtualclonedrive and my video codec pack I have switched from avg antivirus to avast antivirus just to check that the problem had nothing to do with my antivirus software I've checked for viruses and it seems that there are no infections There is something I haven't been able to uninstall which is Creative MediaSource I press Uninstall but nothing happens After uninstalling all of those things the BSODs keep appearing And today I got really scared because my computer refused to display the desktop after the welcome sign disappeared the screen went black and I couldn't do anything apart from restarting it using the ctrl alt del command I don't know if this is relevant but whenever I start watching youtube videos the computer's temperature rises considerably if I touch any piece of metal near the fan it kinda burns and also when I bought it I noticed that both music and videos would skip a lot which stopped after I disabled the ACPI Control Method Battrey device I've attatched the zip file with the necessary folders and files i ran the perfmon report once on May st and saved the report and did the same again on May rd that's why there are two html files I would really appreciate any help I can get Thanks in Advance Alejandro

A:Random BSODs appearing at random

Hi alejando and welcome to SF

Let's check the file system first: open an administrative command prompt (Start, typi in CMD, rightclick on the icon, run as Administrator.)
In that black window you type
chkdsk c: /f /x
If that doesn't find/fix anything, follow this tutorial to check your RAM

That temperature spike definitely needs attention. If you can get to the heatsink, blow it out with some canned air.

RAM - Test with Memtest86+


Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\David\Desktop\BSODs\alejandrog\052111-24382-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.17592.amd64fre.win7sp1_gdr.110408-1631
Machine Name:
Kernel base = 0xfffff800`02e54000 PsLoadedModuleList = 0xfffff800`03099650
Debug session time: Fri May 20 23:03:50.589 2011 (GMT-4)
System Uptime: 0 days 0:01:29.682
Loading Kernel Symbols
...............................................................
................................................................
........................................
Loading User Symbols
Loading unloaded module list
....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 24, {1904fb, fffff880023bc478, fffff880023bbcd0, fffff880016bdcf9}

Probably caused by : Ntfs.sys ( Ntfs!NtfsCheckExistingFile+f9 )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

NTFS_FILE_SYSTEM (24)
If you see NtfsExceptionFilter on the stack then the 2nd and 3rd
parameters are the exception record and context record. Do a .cxr
on the 3rd parameter and then kb to obtain a more informative stack
trace.
Arguments:
Arg1: 00000000001904fb
Arg2: fffff880023bc478
Arg3: fffff880023bbcd0
Arg4: fffff880016bdcf9

Debugging Details:
------------------
EXCEPTION_RECORD: fffff880023bc478 -- (.exr 0xfffff880023bc478)
ExceptionAddress: fffff880016bdcf9 (Ntfs!NtfsCheckExistingFile+0x00000000000000f9)
ExceptionCode: c0000005 (Access violation)
ExceptionFlags: 00000000
NumberParameters: 2
Parameter[0]: 0000000000000000
Parameter[1]: ffffffffffffffff
Attempt to read from address ffffffffffffffff

CONTEXT: fffff880023bbcd0 -- (.cxr 0xfffff880023bbcd0)
rax=fffff8a0035e7040 rbx=bffff8a0035e6fe0 rcx=0000000000000080
rdx=fffffa800967cb60 rsi=0000000000000000 rdi=fffff8a0035e7010
rip=fffff880016bdcf9 rsp=fffff880023bc6b0 rbp=0000000000000000
r8=0000000000000000 r9=0000000000000000 r10=fffff8a002968060
r11=fffffa800967cb60 r12=fffffa8008967e40 r13=fffffa800aaa4010
r14=fffff88003788460 r15=fffffa80082d7f70
iopl=0 nv up ei ng nz na pe cy
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010283
Ntfs!NtfsCheckExistingFile+0xf9:
fffff880`016bdcf9 8b8bac000000 mov ecx,dword ptr [rbx+0ACh] ds:002b:bffff8a0`035e708c=????????
Resetting default scope

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

PROCESS... Read more

http://www.sevenforums.com/bsod-help-support/164806-random-bsods-appearing-random.html
Relevancy 49.02%

Hello everyone and thank you for taking the time to read a newbie's post Anyways I'm having a really frustrating problem Symptoms - Random BSODs happening at random time intervals from bootup Example Bootup and after minutes BSOD Bootup again and after minutes BSOD - BSODS are variety of errors not just one Side Note - Been running exact same build of windows x from august till November At around the rd I BSODS - Times Random at Please Help Random did a clean install using the exact same disc drivers etc Problems started after my clean install Actions Taken - Ran Windows Memory Diagnostic on all memory with no errors - Ran Windows Memory Random BSODS at Random Times - Please Help Diagnostic on each memory DIMM individually and no errors - Ran SeaGate Seatools and my hard drive passed - Reinstalled Windows XP Vista and version of my wireless usb adapter and problem continued - Removed NVIDIA drivers for my GT and using the default ones problem still remained - Problem still continues in Safe Mode and Safe Mode with Networking - Did another clean install of windows using again the same disc and drivers etc as from the time it worked still nothing - on another post i read to run VERIFIER FLAG ALL or something similar in command prompt The last two minudumps are after I ran that and rebooted -------- The minidumps since the last clean install are included Any ideas Thanks Roik

A:Random BSODS at Random Times - Please Help

Hello and welcome to SF








  
Quote: Originally Posted by pcnm0430


The minidumps since the last clean install are included.


Where?

http://www.sevenforums.com/bsod-help-support/36728-random-bsods-random-times-please-help.html
Relevancy 49.02%

For the last few months I have been having strange stop errors First they only appeared a few minutes Random random BSODs times at after I started my Random BSODs at random times computer for Random BSODs at random times the first time that day with many different error codes After a couple of months of trying different solutions testing my RAM installing drivers flashing BIOS etc I figured it might be one of my hard drives acting up and I removed my oldest couple Since then my computer has been working fine but today I had two BSODs in a row with quot The video memory manager has encountered a fatal error quot and quot fltmgr sys quot Some other random error codes I've encountered Memory management Page fault in non Random BSODs at random times paged area Bad pool caller Driver irql not less than or equal Also most of the times my BSOD error dump stops at and claims to be completed but I don't receive a minidump file like when it reaches Sometimes it keeps retrying and stopping at Operating System Windows Ultimate -bit SP CPU AMD FX- C Zambezi nm Technology RAM GB Dual-Channel DDR MHz - - - Motherboard Gigabyte Technology Co Ltd A-UD CPU C Graphics BenQ G HD x Hz MB ATI AMD Radeon HD Series XFX Pine Group C Hard Drives GB M -CT M SSD ATA Device SSD GB Western Digital WDC WD FAEX- Z A ATA Device SATA C GB Western Digital WDC WD AADS- S B ATA Device SATA C Optical Drives DTSOFT Virtual CdRom Device TSSTcorp CDDVDW SH- BB ATA Device Audio AMD High Definition Audio Device I'm attaching my dump files from since a few months ago

Relevancy 49.02%

Hello, so, can't tell when this all started happening, but every one or two weeks, either in a game or just sitting idle, I get the 3B STOP error code. So after 3 months of this, I'm finally asking for help here. I know, I took my sweet time doing it. I will attach the requested zip file as per the BSoD rules and guidelines sticky.

Also, this is what my Windows recovery window after a bootup after said Blue Screen.

Problem signature:



Problem Event Name: BlueScreen

OS Version: 6.1.7601.2.1.0.768.3

Locale ID: 1033

Additional information about the problem:



BCCode: 3b

BCP1: 00000000C0000005

BCP2: FFFFF88001D28C1D

BCP3: FFFFF88009CB6850

BCP4: 0000000000000000

OS Version: 6_1_7601

Service Pack: 1_0

Product: 768_1

But I'm sure the zip has what you all need.

Thanks in advance,

Anthony.

http://www.sevenforums.com/bsod-help-support/390025-random-3b-bsods-random-intervals.html
Relevancy 49.02%

I've been experiencing BSODs on this laptop ever since I got it. (It was my brother's) Each BSOD I get is usually different, either when browsing, playing games, etc. They're pretty much random. I would appreciate some help

A:Random BSODs on this Laptop (They are all random)

Code:
fffff880`064f4208 fffff880`0119df37Unable to load image \SystemRoot\system32\drivers\N360x64\0402000.00C\SYMDS64.SYS, Win32 error 0n2
*** WARNING: Unable to verify timestamp for SYMDS64.SYS
*** ERROR: Module load completed but symbols could not be loaded for SYMDS64.SYS
SYMDS64+0x64f37

Code:
fffff880`064f47c8 fffff880`03c49446Unable to load image \SystemRoot\system32\drivers\N360x64\0402000.00C\SRTSPX64.SYS, Win32 error 0n2
*** WARNING: Unable to verify timestamp for SRTSPX64.SYS
*** ERROR: Module load completed but symbols could not be loaded for SRTSPX64.SYS
SRTSPX64+0xe446
Uninstall Norton 360 and all Symentec products using Norton Removal tool.

Download and install Drivers for Atheros AR5B91 and Windows 7. Follow Driver Install - Device Manager to install it.

Update the display driver from https://downloadcenter.intel.com/ .... take the Intel? Driver Update Utility to do it.

Let us know the results. Further troubleshooting may be needed depending on the situation.

http://www.sevenforums.com/bsod-help-support/349391-random-bsods-laptop-they-all-random.html
Relevancy 46.87%

Hello there. My PC used to run windows 7 for several years but a few weeks ago I decided to make a clean (fully formatted one of my ssds and installed it there from bootable flash) install of windows 10.
Everything went okay as far as I can tell, but I occasionally get very weird bsods that are hardly hardware-related because, like I said, Win 7 used to run perfect for months and years.
I uploaded my dump here :https://drive.google.com/open?id=0B9oQPClLlM1KZVlSdWNRZ3JxZkE
please tell me if thats fine.
im 99% sure its some driver, because I followed instructions on how to use driver verifier and couldnt even boot the system up with it activated...
hope you'll see what it is for me and help me out, thanks in advance !
p.s. sorry if i failed to comply with the guidelines for posting - ill straighten it out as we go

A:Win 10 x64 random bsods

here are the files required if you think they can help...

http://www.bleepingcomputer.com/forums/t/625650/win-10-x64-random-bsods/
Relevancy 46.87%

Hey guys. I keep randomly BSODing. I've attached my crash dump file. If anyone could help me figure out what the problem is, that'd be great =]

A:Random BSODs

I notice two things. First, please update ESET to the latest version. Go to the manufacturer's site and download the latest version.

Second, remove Daemon Tools or any other CD virtualization program you may have. They use SPTD.sys, found in your dump, that is notorious for causing BSODs.

After the program is uninstalled, run this SPTD installer/uninstaller and remove SPTD: DuplexSecure - Downloads

If that doesn't work, enable driver verifier: Using Driver Verifier to identify issues with Drivers


Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Documents and Settings\JK\Desktop\072810-33968-01\072810-33968-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Machine Name:
Kernel base = 0xfffff800`02e00000 PsLoadedModuleList = 0xfffff800`0303de50
Debug session time: Wed Jul 28 13:11:18.973 2010 (GMT-4)
System Uptime: 0 days 4:04:59.426
Loading Kernel Symbols
...............................................................
................................................................
...............................................
Loading User Symbols
Loading unloaded module list
........
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 3B, {c0000005, fffff9600023ca45, fffff88009025150, 0}

Probably caused by : win32k.sys ( win32k!MulAssociateSharedSurface+15 )

Followup: MachineOwner
---------

7: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff9600023ca45, Address of the exception record for the exception that caused the bugcheck
Arg3: fffff88009025150, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.

Debugging Details:
------------------
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at "0x%08lx" referenced memory at "0x%08lx". The memory could not be "%s".

FAULTING_IP:
win32k!MulAssociateSharedSurface+15
fffff960`0023ca45 4c8b98300d0000 mov r11,qword ptr [rax+0D30h]

CONTEXT: fffff88009025150 -- (.cxr 0xfffff88009025150)
rax=0000000000000000 rbx=fffff900c3137b00 rcx=fffffa8008344080
rdx=00000000400020c0 rsi=fffff900c2e6d028 rdi=fffff900c3137b98
rip=fffff9600023ca45 rsp=fffff88009025b20 rbp=0000000001122b69
r8=0000000001122b69 r9=00000041000000cf r10=0000000000000000
r11=fffff88009025b48 r12=fffff900c0108010 r13=00000000400020c0
r14=00000000096f6200 r15=0000000000000001
iopl=0 nv up ei pl zr na po nc
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010246
win32k!MulAssociateSharedSurface+0x15:
fffff960`0023ca45 4c8b98300d0000 mov r11,qword ptr [rax+0D30h] ds:002b:00000000`00000d30=????????????????
Resetting default scope

CUSTOMER_CRASH_COUNT: 1

DEF... Read more

http://www.sevenforums.com/bsod-help-support/100421-random-bsods.html
Relevancy 46.87%

Okay so yeah I've gotten a few random BSODs over the past few days, and I'm not really too sure what is causing it. It hasn't happened while playing games (yet) but during just regular use like browsing the net and today it did it while I was listening to music. I have a feeling it might be time for a fresh Windows install but if i can avoid that headache I definitely want to.

any assistance would be greatly appreciated!

A:Random BSODs

you have an issue with the file that allows your internet connection, ewhat did you do just before this started?

http://www.sevenforums.com/bsod-help-support/377731-random-bsods.html
Relevancy 46.87%

Hello, I've recently purchased a new motherboard, RAM, and processor.
I've have started getting BSODs and I'm going to run a memtest tonight.

It is a full retail version of Windows 7 Ultimate 64 bit.
The hard drive is the oldest part of the hardware about a year old

I hope I've uploaded everything right and thanks for your help

A:Random BSODs

are you running comdo and malwarebytes?

http://www.sevenforums.com/bsod-help-support/201650-random-bsods.html
Relevancy 46.87%

I am including the TSF_XP-support.ZIP as requested in the ?Blue Screen of Death Posting Instructions? article.

I've been having these random BOSDs crashes on my PC for few months. Hopefully someone can help me figure out the cause

I am running Windows XP Pro on a (32-bit) system with AMD X2 CPU. The system is about a year old and so is the OS installation.

Thank you very much for your time.

Aly.

Relevancy 46.87%

BSODs occurring usually around twice daily. They often happen when gaming, but I've also had them when browsing the web.

A:Random BSODs

I've run memtest+ twice (total of 12 passes) and received no errors.

http://www.sevenforums.com/bsod-help-support/253176-random-bsods.html
Relevancy 46.87%

Hi there Recently I've had a few BSODs Sometimes while my laptop is Random BSODs hibernating I go back to using it and find that my laptop has restarted itself because of a blue screen and sometimes while I'm actually using it and then it restarts itself which Random BSODs it has just done again I haven't done anything weird or different than what I usually do Anyway here I am copying and pasting what the Windows recovery thing popped up once my computer restarted just now Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode d BCP BCP BCP BCP FFFFF A OS Version Service Pack Product Files that help describe the problem C Windows Minidump - - dmp C Users MyLaptopName AppData Local Temp WER- - sysdata xml Read our privacy statement online Windows Privacy Statement - Microsoft Windows If the online privacy statement is not available please read our privacy statement offline C Windows system en-US erofflps txt I don't know if this is useful or not Is anyone please able to help me with this as I have no idea what is causing it or how to prevent it from happening It's getting annoying Thanks

A:Random BSODs

Please provide your full reports.http://www.techsupportforum.com/foru...ta-452654.html

-----

http://www.techsupportforum.com/forums/f299/random-bsods-692163.html
Relevancy 46.87%

Hello folks,

For the last 5 or so days I have been experiencing random Blue Screens, the first one I thought it was just random but well, another 4 happened so it's not that random. Anyways, I'll attach the .dmp files and I'd appreciate it if you folks could help me out.

Cheers.

http://www.sevenforums.com/bsod-help-support/400291-random-bsods.html
Relevancy 46.87%

I am including the TSF_XP-support.ZIP as requested in the ?Blue Screen of Death Posting Instructions? article.

I've been having these random BOSDs crashes on my PC for few months. Hopefully someone can help me figure out the cause

I am running Windows XP Pro on a (32-bit) system with AMD X2 CPU. The system is about a year old and so is the OS installation.

Thank you very much for your time.

Aly.

A:Random BSODs, please help, TIA.

Please post over in the XP forums located here: http://www.techsupportforum.com/f10/

http://www.techsupportforum.com/forums/f217/random-bsods-please-help-tia-462431.html
Relevancy 46.87%

Hello,
I'm having trouble with my new PC I assembled few days ago. In many situations I had BSODs while playing, browsing net or even in idle. As IT guy I can't even think of it, because all of STOP codes are different! My RAM is ok, disk also, checkdisk without errors, SFC ok, temperatures normal, system updated and genuine. Help would be appreciated. Thanks!

http://www.tenforums.com/bsod-crashes-debugging/47519-random-bsods.html
Relevancy 46.87%

I have been getting random BSODs for quite some time now usually once every couple of hours They become more frequent when playing games They don't seem to be triggered by a single event one time the event will cause help BSODs - Please Random the crash the next time it won't For instance one time I Random BSODs - Please help opened by dvd drive and at the same time I got a BSOD The next bootup it was Random BSODs - Please help fine If I let the computer sit it will not crash But if I start to listen to music or try to access a file it will randomly crash In addition sometimes when booting I will receive a BSOD It will load halfway into windows and then crash Specs Vista Home Premium -bit Core Duo E MSI P N SLI Platinum x GT in SLI X-Fi XtremeMusic GB x GB OCZ Fatal ty DDR - OCZ W SLI GameXStream TB Western Digital rpm SATA This problem has been getting extremely annoying as I cannot predict the next time it will occur I replaced the hard drive and ram recently The ram is not producing any errors I receive this quot Windows has recovered from an unexpected shutdown quot message upon booting Quote Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode e BCP FFFFFFFFC BCP FFFFF C DD BCP FFFFF E BCP FFFFF E E OS Version Service Pack Product Files that help describe the problem C Windows Minidump Mini - dmp C Users Kevin AppData Local Temp WER- - sysdata xml C Users Kevin AppData Local Temp WER tmp version txt Read our privacy statement http go microsoft com fwlink link amp clcid x

A:Random BSODs - Please help

Hi -

The info you posted shows a bugcheck = 0x7e = system thread threw an exception; the exception = 0xc0000005 = memory access violation.

Not much doubt here as to the cause of your BSOD situation - you are not updated with Vista Service Pack 1. Updating to SP1 must be the #1 priority or the BSOD frequency will increase rendering the system useless. You have older Vista drivers dating back as far as 2006 clashing with new 2009 drivers and program installations written with SP1 in mind.

Any particular reason for no SP1?

Regards. . .

jcgriff2

.

http://www.techsupportforum.com/forums/f299/random-bsods-please-help-372053.html
Relevancy 46.87%

Hello congrats on the great site i looked Random lot) BSODs(a a lot on it but couln't find a response to my problem I'm getting a lot of bsods lately i was getting them before too but that was rarely and it was due to my Random BSODs(a lot) agp video card radeon hd i changed it recently because there were more and more bsods to pci i know dual slots motherboard and no more crashes from the video card Unfortunately i'm having other kinds of bsods After downloading a bluscreenviewer i noticed avast was causing some of them Random BSODs(a lot) I uninstalled it yesterday hoping Random BSODs(a lot) they would go away but no such luck Like the title says i'm getting them on a random pattern Yesterday i was watching an youtube video and got one the one i got today happened while writing an email so i have literally no idea what is wrong with it I know it is a hardware problem because i downgraded to xp but i was still getting them I ran memtest and it found no errors checked the hdd for bads couldn't find any the temperatures are fine http i imgur com t YZH png Sometimes the pc would just freeze like no bsods it just freezes and i have to reset it My guess is either the motherboard the processor or the power source it's not a quot made in china one quot it's a spire w have gone to shit I hope you can help me thanks looks like one more bsod while idling it mentions something about ntfs so i guess it's the harddrive to be fair it does have years https www dropbox com s jz xxu - - dmp and one more -memory management https www dropbox com s izrgpi sul - - dmp

A:Random BSODs(a lot)

I see some memory corruption, you say you have followwd this tutorial:RAM - Test with Memtest86+

Thanks Ant

http://www.sevenforums.com/bsod-help-support/247867-random-bsods-lot.html
Relevancy 46.87%

OS: Windows 7 Pro 64bit
What I've Tried: Windows XP, Windows 7, Memtest, chkdsk, scannow...still BSOD
Computer: Lenovo Thinkpad T61; with NVS 140m

I keep getting BSODs no matter the OS. Any clue? Software or hardware?
It can go for a month without BSODs. And then one day it will BSOD a few minutes after logging in. And then reboots and BSODs on login...repeats..
Running Furmark (GPU Burner) does not necessarily increase the change of a BSOD.
Hibernation and sleep help make BSODs appear.

Please help. I have no clue what is wrong.

A:Random BSODs

  
Quote: Originally Posted by rchungtw


OS: Windows 7 Pro 64bit
What I've Tried: Windows XP, Windows 7, Memtest, chkdsk, scannow...still BSOD
Computer: Lenovo Thinkpad T61; with NVS 140m

I keep getting BSODs no matter the OS. Any clue? Software or hardware?
It can go for a month without BSODs. And then one day it will BSOD a few minutes after logging in. And then reboots and BSODs on login...repeats..
Running Furmark (GPU Burner) does not necessarily increase the change of a BSOD.
Hibernation and sleep help make BSODs appear.

Please help. I have no clue what is wrong.



Fifty BSOD's may take a while doing them now.
Ken

http://www.sevenforums.com/bsod-help-support/90619-random-bsods.html
Relevancy 46.87%

I'm getting random BSODs which are somewhat caused by different system files ntr..exe, usbhub.sys now tcip.sys and stpd.sys. I tested memory using latest memtest 5hrs no problems. So I can not figure out what is the issue here. I even tried debugging mode to find the cause of the issue I could not login to win 7 (x64) due to constant BSODs. Can you take a look at the dumps and tell me what might be wrong here. Thx

A:Random BSODs

  
Quote: Originally Posted by mvbozkurt


I'm getting random BSODs which are somewhat caused by different system files ntr..exe, usbhub.sys now tcip.sys and stpd.sys. I tested memory using latest memtest 5hrs no problems. So I can not figure out what is the issue here. I even tried debugging mode to find the cause of the issue I could not login to win 7 (x64) due to constant BSODs. Can you take a look at the dumps and tell me what might be wrong here. Thx


mybozkurt hi and welcome



I analyzed the 5 most recent dmp's and you have several different causes for them. First sptd.sys (used by daemon tools and alcohol is always problematic. I recommend its removal.

Second, since there are several other causes I would have to think there is a hardware problem of some sort. Use these instructions to find out what it means and what to try.
http://www.sevenforums.com/crash-loc...-what-try.html

Finally, if you are overclocking, or undervolting, I suggest you revert back to default values if even just to test.

Let us know if you need assistance


Jan

http://www.sevenforums.com/bsod-help-support/93292-random-bsods.html
Relevancy 46.87%

Win Home Premium bit desktop experiences BSODs infrequently over the last year or so usually when I am not using it Causes of BSODs are varied mostly memory management recent one was bad pool header Machine used to be overclocked but I have steadily dialed that back to default settings using the Gigabyte utility seems like each time I did the BSODs stopped for a while then occurred again so different causes Random BSODs, I hard to know if they are actually related Ran Windows memory diagnostic today extended and it reported no errors The more recent minidumps are attached I have older ones if they would be of help Grateful for any assistance OS Version Microsoft Windows Home Premium Service Pack bit Processor Intel R Core TM i CPU X GHz Intel Family Model Stepping Processor Count RAM Mb Graphics Card Random BSODs, different causes NVIDIA GeForce GTX Mb Hard Drives C Total - MB Free - MB D Total - MB Free - MB Motherboard Gigabyte Technology Co Ltd X A-UD Random BSODs, different causes R Antivirus McAfee Anti-Virus and Anti-Spyware Updated and Enabled nbsp

https://forums.techguy.org/threads/random-bsods-different-causes.1042431/
Relevancy 46.87%

For awhile now I've been getting BSODs from things from Ntkrnlmp.exe to netr28ux.sys to random stops with nothing to point fingers at. (Oh, and some hardware stops as well.)
I have found and eliminated/updated most of the 3rd party drivers from the system causing some of the crashes but not really getting at the core problem.
I'm leaving the last 3 crashes, I got 12 others just chillin' on my HD.

Halp

A:Random BSODs

Hi and welcome to SF

please remove any virtual CD program such as Deamon tool or Alcohol 120%, eventhough they are not pointed as the causes in those minidump files, however, they are well-known for causing BSODs.

Code:
sptd sptd.sys Mon Oct 12 03:55:14 2009 (4AD24632)
After that, please use this tool to un-install sptd.sys, which is component of many virtual CD program
DuplexSecure - Downloads

Also, please update these drivers:

Code:
SiRemFil SiRemFil.sys Thu Jun 21 02:42:10 2007 (46798312)
SiWinAcc SiWinAcc.sys Fri Jun 15 07:02:02 2007 (4671D6FA)
They are Silicon Image drivers

Hope it's help

BUGCHECK

Code:
BugCheck A, {7a0000000048, 2, 1, fffff80002c81237}
Probably caused by : ntkrnlmp.exe ( nt!ExTryAcquireSpinLockExclusiveAtDpcLevel+2f )
Followup: MachineOwner
---------
BugCheck 50, {ffffe0a0009bad40, 0, fffff8800144f39d, 7}

Could not read faulting driver name
Probably caused by : Ntfs.sys ( Ntfs!NtfsLookupAllocation+bd )
Followup: MachineOwner
---------
BugCheck D1, {0, 2, 0, fffff88002e5ceba}
Probably caused by : hardware ( afd!AfdFastConnectionReceive+8a )
Followup: MachineOwner
---------
Regard

Tuan

http://www.sevenforums.com/bsod-help-support/93002-random-bsods.html
Relevancy 46.87%

hello,
i have built a new PC like 1 month ago, i also overclocked my i5-3570k, but it is a stable overclock i guess since prime95 ran for 8 hours without any error. I started getting these BSODs recently, first 2 weeks after i overclocked it, there was no BSOD whatsoever, after i started getting BSODs i lowered my OC as well but it hasnt helped. Im already desperate due to the fact that this PC cost me a lot of money and its already broken I also checked both of my RAMs with memtest separately but there was no error found, i have no clue where could be a problem, please guys, help me.

A:random BSODs (1A, 1E, 0A)

just got another BSOD, this time it was 0x0000000A again

http://www.sevenforums.com/bsod-help-support/248699-random-bsods-1a-1e-0a.html
Relevancy 46.87%

There is no real pattern as far as when it happens. Files are attatched

*Edit*
-System specs added to my profile.
-Checked all connections, and everything is seated well.
-SFC showed no errors

A:Random BSODs all around

Hello ctowers200 and welcome to Seven Forums.

I'm not a BSOD expert. The experts on this Forum are seriously back-logged helping others. So until one responds to your thread there are a few things to check. First, it would help to know your system specs. Top of each page click User CP and in left column click Edit System Spec. If you aren't sure about the specs a free utility called Speccy will give you everything you need to know.

Speccy - System Information - Free Download

- Make sure your memory sticks, GPU, etc are seated properly
- If using multiple memory sticks test each stick by itself in slot # 1 (or whichever slot the motherboard manufacturer recommends for a single stick)
- After checking each stick, check each slot
- Check your power management options.
- Check your PSU.
- Use default BIOS setting if you overclock

You could also run a system file checker scan from an elevated command prompt (option two.) It will look for damaged or corrupt system files and try to replace them with the correct versions. If problems are found run the scan 3 times rebooting in between each scan.

SFC /SCANNOW Command - System File Checker

If still no luck, you could work through these troubleshooting steps prepared by one of the forum experts. It's time consuming but may help isolate the problem.

Troubleshooting Steps for Windows 7

http://www.sevenforums.com/bsod-help-support/247417-random-bsods-all-around.html
Relevancy 46.87%

Hi!

I'm running a Windows XP SP2 system. It's a 2 week-fresh clean installation.
Now, all of a sudden, I got 2 BSODs within 1 week, random times, with random running programs. Since I installed different programs within that time-span it's a bit hard to pin-point the culprit program. So, could anyone help me? Ive attached the .dmp in a .rar file with this post.

It was in C:\WINDOWS\Minidump
It's a 64K minidump file. And I've viewed it with Microsoft debugger and I really can't understand much.

This is the .dmp of the second BSOD.
( I didn't know such files were created until I searched online for BSOD fixes, after the second BSOD. So, I don't have the first one.)

Thanks.. :)

A:Random BSODs

Additional Info :

I have a nVIDIA 8400GS 512MB graphics card and an inbuilt sound card from Realtek. I have 1GB of RAM and a ASUS motherboard.

I use software only from highly trusted sources - Google, Adobe, Piriform, Oracle, etc..

http://www.techsupportforum.com/forums/f10/random-bsods-522266.html
Relevancy 46.87%

Hello,

I upgraded my system recently from vista to win7 64 bit and from day one i started having BSOD. I noticed when Aero is disabled i get a day or so without BSOD. But when Aero is enabled the system does not quite recover from BSOD, after restart windows has another BSOD during boot time.

Only difference that my previous vista installation and win7 installation has is that i have now enabled my motherboards raid controller.

I have tried reinstalling win7 several times with newer, older drivers or default drivers but no luck so far.

My system specs:
Intel Q9650
Gigabyte GA-EP45-DS5
900w PSU
Ati Radeon HD4890
4GB DDR2 Crucial Ballistix

I have attached a zip consisting of 19 dumps and a summary txt from BlueScreenView of those dumps.

So if anyone could be of assistance I would appreciate it a lot...

A:Random BSODs

Hi and Welcome to SF






Quote:
STOP 0x00000050: PAGE_FAULT_IN_NONPAGED_AREA

Usual causes: Defective hardware (particularly memory - but not just RAM), Faulty system service, Antivirus, Device driver, NTFS corruption, BIOS

STOP 0x0000004E: PFN_LIST_CORRUPT

Usual causes: Device driver, ?memory
STOP 0x000000BE: ATTEMPTED_WRITE_TO_READONLY_MEMORY

Usual causes: Device driver, Memory
STOP 0x0000003B: SYSTEM_SERVICE_EXCEPTION

Usual causes: System service, Device driver, graphics driver, ?memory
STOP 0x0000001A: MEMORY_MANAGEMENT

Usual causes: Device driver, memory, kernel
STOP 0x00000024: NTFS_FILE_SYSTEM

Usual causes: Disk corruption, insufficient physical memory, Device driver, Indexing, Resident antivirus, backup, defrag programs, Disk/Drive failing/failure
STOP 0x0000007E: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED

Usual causes: Insufficient disk space, Device driver, Video card, BIOS, Breakpoint with no debugger attached, Hardware incompatibility, Faulty system service, Memory, 3rd party remote control,
STOP 0x00000019: BAD_POOL_HEADER

Usual causes: Device driver


Different stop codes with different things blame, this can be sign for hardware issue. However, let's try something first before we getting to hardware.

Please remove Deamon tool or Alcohol 120%, they use sptd.sys, which I found in your loaded drivers, well-known for causing BSOD, then use this tool to remove sptd.sys:
http://www.duplexsecure.com/en/downloads

Next, memory corruption was blamed in some of dmp file, as well as some exception codes suggest that
==> please download third party called memtestx86, burn it to CD using Iso recorder: ISO Recorder v3 , and let it run for at least 7 passes
Instruction:--> Memory Diagnostics

Next, ntfs.sys was blamed in one of the dmp with stop code 24, this usually mean hard drive issue, please run these 2 check:
Disk Check
and HD diagnostic:
HD Diagnostic <-- (Instruction)

Directx was blamed in one of the dmp file, please download and reinstall new version of it:
Download details: DirectX End-User Runtime


Code:
BugCheck BE, {fffff8a0042b3383, ed2000011657f121, fffff8800c4f4760, b}

Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+4244e )

Followup: MachineOwner
---------
BugCheck 19, {3, fffff8a00dd30820, fffff8a00bfff820, fffff8a00dd30820}

Probably caused by : Pool_Corruption ( nt!ExFreePool+75b )

Followup: Pool_corruption
---------
BugCheck 3B, {c0000005, fffff80002aafa87, fffff88007a059f0, 0}

Probably caused by : memory_corruption ( nt!MmCopyToCachedPage+227 )

Followup: MachineOwner
---------
BugCheck 50, {fffff70330882a88, 0, fffff80002af3133, 5}
Could not read faulting driver name
Probably caused by : memory_corruption ( nt!MiLocateWsle+103 )

Followup: MachineOwner
---------
BugCheck 1A, {41790, fffffa8000deba90, ffff, 0}

Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+339d6 )

Followup: MachineOwner
---------

BugCheck 24, {1904fb, fffff8800599f228, fffff8800599ea80, fffff80002c0590d}

Probably caused by : Ntfs.sys ( Ntfs!NtfsQueryDirectory+18d5 )

Followup: MachineOwner
---------
BugCheck 1A, {403, fffff6800003cb88, ed0000004e129867, fffff6fc5003f8d0}

Probably caused by : win32k.sys ( win32k!SURFACE::bDeleteSurface+3a2 )

Followup: MachineOwner
---------
BugCheck 1000007E, {ffffffffc0000005, fffff8800301ea5c, fffff880025bd698, fffff880025bcef0}

Probably caused by : dxgmms1.sys ( dxgmms1!VIDMM_GLOBAL::PrepareDmaBuffer+fc8 )

Followup: MachineOwner
---------
BugCheck 19, {20, fffff8a011534700, fffff8a0115347c0, 50c0403}

GetPointerFromAddress: unable to read from fffff80002cc70e0
Probably caused by : fltmgr.sys ( fltmgr!DeleteNameCacheNodes+143 )

Followup: MachineOwner
---------
BugCheck 4E, {99, 117e3c, 2, 600fb}

Probably caused by : memory_corruption ( nt!MiBadShareCount+4c )

Followup: MachineOwner
---------

BugCheck 1A, {41790, fffffa8000e3bf20, ffff, 0}

Probably caused by : win32k.sys ( w... Read more

http://www.sevenforums.com/bsod-help-support/95941-random-bsods.html
Relevancy 46.87%

I've been getting random BSODs for a few days now. The last one happened when I was just browsing the internet. The minidump files are uploaded.

Windows 7 64bit
Original installed OS
Age of system: 2 years (motherboard just a few weeks)

A:Random BSODs

  
Quote: Originally Posted by Brsak


I've been getting random BSODs for a few days now. The last one happened when I was just browsing the internet. The minidump files are uploaded.

Windows 7 64bit
Original installed OS
Age of system: 2 years (motherboard just a few weeks)



These crashes were caused by memory corruption (probably a driver). Please run these two tests to verify your memory and find which driver is causing the problem.

If you are overclocking anything reset to default before running these tests.
In other words STOP!!!
1-Memtest.





Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.



RAM - Test with Memtest86+

2-Driver verifier






Quote:
I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.


Driver Verifier - Enable and Disable
Further Reading
Using Driver Verifier to identify issues with Windows drivers for advanced users

http://www.sevenforums.com/bsod-help-support/202986-random-bsods.html
Relevancy 46.87%

Hello,

I got my laptop about a month ago, and up until two weeks ago it was running fine.
Symptoms started with random reboots, but now it's getting to the point where it'll display BSODs almost every hour, for no apparent reason.
Attached are minidumps, hope someone'll help me out.

Thanks in advance,

Kim

A:Random BSODs

Welcome

All your dumps show different causes

Lets start with avgntflt.sys caused by Avira. Remove Avira using Uninstall a program in Control Panel, clean up after with Avira registry cleaner, and replace with Microsoft Security Essentials - Free Antivirus for Windows to run with Windows firewall turned on.

Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Yusra\Downloads\algaf\090812-19328-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
Machine Name:
Kernel base = 0xfffff800`02654000 PsLoadedModuleList = 0xfffff800`02898670
Debug session time: Sat Sep 8 04:45:01.635 2012 (UTC + 6:00)
System Uptime: 0 days 0:07:46.291
Loading Kernel Symbols
...............................................................
................................................................
......................................
Loading User Symbols
Loading unloaded module list
.......
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1E, {ffffffffc0000005, fffff800026e5fbf, 0, ffffffffffffffff}

Unable to load image avgntflt.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for avgntflt.sys
*** ERROR: Module load completed but symbols could not be loaded for avgntflt.sys
Probably caused by : avgntflt.sys ( avgntflt+1f35 )

Followup: MachineOwner
---------

2: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

KMODE_EXCEPTION_NOT_HANDLED (1e)
This is a very common bugcheck. Usually the exception address pinpoints
the driver/function that caused the problem. Always note this address
as well as the link date of the driver/image that contains this address.
Arguments:
Arg1: ffffffffc0000005, The exception code that was not handled
Arg2: fffff800026e5fbf, The address that the exception occurred at
Arg3: 0000000000000000, Parameter 0 of the exception
Arg4: ffffffffffffffff, Parameter 1 of the exception

Debugging Details:
------------------
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

FAULTING_IP:
nt!IoGetRelatedDeviceObject+5f
fffff800`026e5fbf 488b12 mov rdx,qword ptr [rdx]

EXCEPTION_PARAMETER1: 0000000000000000

EXCEPTION_PARAMETER2: ffffffffffffffff

READ_ADDRESS: GetPointerFromAddress: unable to read from fffff80002902100
ffffffffffffffff

ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

BUGCHECK_STR: 0x1E_c0000005

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

PROCESS_NAME: avguard.exe

CURRENT_IRQL: 0

LAST_CONTROL_TRANSFER: from fffff8000271dd88 to fffff800026d31c0

STACK_TEXT:
fffff880`1b99c9b8 fffff800`0271dd88 : 00000000`0000001e ffffffff`c0000005 fffff800`026e5fbf 00000000`00000000 : nt!KeBugCheckEx
fffff880`1b99c9c0 fffff800`026d2842 : fffff880`1b9... Read more

http://www.sevenforums.com/bsod-help-support/251616-random-bsods.html
Relevancy 46.87%

Hi, I am hoping someone could help me here. Immediately after upgrading a clients pc he started experiencing BSODs. Naturally we assumed this must be a hardware fault as it occured after the upgrade (RAM, CPU, Motherboard and HDD). We tested all his parts many times but found no faults. Eventually we used a SMART tool and noted that the HDD was giving errors so we swopped it out. 2 days later he comes back with the same problem. We've tested everything, especially RAM but everything checks out. We can't swop any hardware if it doesn't test as faulty...but something has to be faulty somewhere. A windows reload didn't even help.

Hope these files help :)

A:Random BSODs

Hi.

The dumps in the zip are corrupt. Can you please run the tool again and post?

http://www.techsupportforum.com/forums/f217/random-bsods-485198.html
Relevancy 46.87%

Hey, so I got a new PC, newly installed OS and everything. I installed the motherboard drivers and graphics drivers etc etc from the disks that came with the components and I also updated any available ones on the corresponding websites. However I still get random BSODs. I'm running:

Windows 7 Home Premium 64bit - Retail
Intel i7 2600k
Nvidia 560
4 GB RAM
Gigabyte Z68XP-UD3 Motherboard

I have also attached the required files.
Thanks in advance for any help!

A:Random BSODs on new PC

  
Quote: Originally Posted by Sardonic


Hey, so I got a new PC, newly installed OS and everything. I installed the motherboard drivers and graphics drivers etc etc from the disks that came with the components and I also updated any available ones on the corresponding websites. However I still get random BSODs. I'm running:

Windows 7 Home Premium 64bit - Retail
Intel i7 2600k
Nvidia 560
4 GB RAM
Gigabyte Z68XP-UD3 Motherboard

I have also attached the required files.
Thanks in advance for any help!


Your 2+ year old wifi driver (netr28x.sys) is causing nifi.sys to crash. I would re-install newest driver from mfr.

Other drivers needing updating

Code:
skfiltv.sys 8/14/2008 1:48:33 AM fffff880`06629000 fffff880`06636000 0x0000d000 0x48a3d541
How To Find Drivers:




Quote:
- search Google for the name of the driver
- compare the Google results with what's installed on your system to figure out which device/program it belongs to
- visit the web site of the manufacturer of the hardware/program to get the latest drivers (DON'T use Windows Update or the Update driver function of Device Manager).
- if there are difficulties in locating them, post back with questions and someone will try and help you locate the appropriate program.


- - The most common drivers are listed on this page: Driver Reference Driver Reference
- - Driver manufacturer links are on this page: Drivers and Downloads

http://www.sevenforums.com/bsod-help-support/202062-random-bsods-new-pc.html
Relevancy 46.87%

Hello,
I get random BSODs, can be during playing WoW or while programming in Visual Studio,
the sound stops for like 1 second, and then I get BSOD

A:Random BSODs

Welcome

Rt64win7.sys Realtek RTL8168D/8111D Family PCI-E Gigabit Ethernet NIC Download Realtek High Definition Audio 2.70 Vista 64 - FileHippo.com
Realtek

Your realtek drivers need to be updated so does your bios.

Update them and let us know if you're getting more blue screens (remove the previous ones first)


Summary


Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\Yusra\Downloads\mOnAr\SF_09-09-2012\090912-17908-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
Machine Name:
Kernel base = 0xfffff800`0304f000 PsLoadedModuleList = 0xfffff800`03293670
Debug session time: Sun Sep 9 19:33:47.819 2012 (UTC + 6:00)
System Uptime: 0 days 2:43:10.504
Loading Kernel Symbols
...............................................................
................................................................
....................................................
Loading User Symbols
Loading unloaded module list
....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {8, 2, 0, fffff8000300833e}

Unable to load image \SystemRoot\system32\DRIVERS\Rt64win7.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for Rt64win7.sys
*** ERROR: Module load completed but symbols could not be loaded for Rt64win7.sys
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : Rt64win7.sys ( Rt64win7+10bb8 )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: 0000000000000008, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff8000300833e, address which referenced memory

Debugging Details:
------------------


READ_ADDRESS: GetPointerFromAddress: unable to read from fffff800032fd100
0000000000000008

CURRENT_IRQL: 2

FAULTING_IP:
hal!HalpDmaFreeMapRegisters+1a
fffff800`0300833e 488b5a08 mov rbx,qword ptr [rdx+8]

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

BUGCHECK_STR: 0xA

PROCESS_NAME: System

TRAP_FRAME: fffff880061fc840 -- (.trap 0xfffff880061fc840)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=fffff880061fc970 rbx=0000000000000000 rc... Read more

http://www.sevenforums.com/bsod-help-support/251901-random-bsods.html
Relevancy 46.87%

Hey guys For a long time I have been experiencing random BSODs Random BSODs in my Windows Ultimate -bit system I have not noticed any pattern in Random BSODs which they occur but the errors are usually x E and similar errors EDIT Here is my crash report as the sticky advises it wouldn't upload onto the forum though so it's being hosted on mediafire Crash Info zip Here is an error report of an x B error I just got BCCode b BCP C BCP FFFFF A C BCP FFFFF FC EA BCP OS Version Service Pack Product Full WhoCrashed report On Fri AM your computer crashed This was likely caused by the following module ntoskrnl exe Bugcheck code x B xC xFFFFF A C xFFFFF FC EA x Error SYSTEM SERVICE EXCEPTION Dump file C Windows Minidump - - Random BSODs dmp file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System The crash took place in a standard Microsoft module Your system configuration may be Random BSODs incorrect possibly the culprit is in another driver on your system which cannot be identified at this time On Thu AM your computer crashed This was likely caused by the following module intelppm sys Bugcheck code x E x x x x Error KMODE EXCEPTION NOT HANDLED Dump file C Windows Minidump - - dmp file path C Windows system drivers intelppm sys product Microsoft Windows Operating System company Microsoft Corporation description Processor Device Driver The crash took place in a standard Microsoft module Your system configuration may be incorrect possibly the culprit is in another driver on your system which cannot be identified at this time On Mon PM your computer crashed This was likely caused by the following module ntoskrnl exe Bugcheck code x E x x x x Error KMODE EXCEPTION NOT HANDLED Dump file C Windows Minidump - - dmp file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System The crash took place in a standard Microsoft module Your system configuration may be incorrect possibly the culprit is in another driver on your system which cannot be identified at this time On Sun AM your computer crashed This was likely caused by the following module rt win sys Bugcheck code x E x x x x Error KMODE EXCEPTION NOT HANDLED Dump file C Windows Minidump - - dmp file path C Windows system drivers rt win sys product Realtek PCI PCIe Adapters company Realtek description Realtek NDIS -bit Driver On Sun AM your computer crashed This was likely caused by the following module ntoskrnl exe Bugcheck code xA xFFFFF FFFD E xE x xFFFFF AC A Error IRQL NOT LESS OR EQUAL Dump file C Windows Minidump - - dmp file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System The crash took place in a standard Microsoft module Your system configuration may be incorrect possibly the culprit is in another driver on your system which cannot be identified at this time On Wed PM your computer crashed This was likely caused by the following module ntoskrnl exe Bugcheck code x B xC xFFFFF A FA xFFFFF E A x Error SYSTEM SERVICE EXCEPTION Dump file C Windows Minidump - - dmp file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System The crash took place in a standard Microsoft module Your system configuration may be incorrect possibly the culprit is in another driver on your system which cannot be identified at this time On Tue AM your computer crashed This was likely caused by the following module win k sys Bugcheck code x B xC xFFFFF A C xFFFFF B x Error SYSTEM SERVICE EXCEPTION Dump file C Windows Minidump - - dmp file path C Windows system win k sys product Microsoft Windows Operating System company Microsoft Corporation description Multi-User Win Driver The crash took place in a standard Microsoft module Your system configuration may be incorr... Read more

A:Random BSODs

As you can see in the result that you got, there are several things are being blamed. First of all it is intelppm.sys, which is intel processor driver. Please download and install fresh copy of it
Secondly, Realtek Ethernet driver Rt64win7.sys was blamed. Please download and install fresh copy of it as well

Look like all of these crash dump are memory related as I can see the exception code c000005, I would suggest you to download third party called memtestx86, burn it to CD using ISO Recorder v3 and let it run for at least 6,7 passes.

Please update following drivers to most up-to-date version:

Code:
AF15BDA AF15BDA.sys Tue Apr 29 15:34:37 2008 (4816DD9D)

Code:
DigitalNow TinyTwin DVB-T Receiver

Please remove virtual CD program such as Deamon tool or Alcohol 120%, they use sptd.sys, which I found in the loaded drivers, known for causing BSODs. Please use this tool to remove sptd.sys
DuplexSecure - Downloads

What third party antivirus software are you using?

BUGCHECK SUMMARY:

Code:
BugCheck 3B, {c0000005, fffff80002a7764c, fffff88008fc1ea0, 0}

Probably caused by : ntkrnlmp.exe ( nt!KiCommitThreadWait+cc )

Followup: MachineOwner
---------

Code:
BugCheck A, {fffffa8005f583e0, 2, 1, fffff80002a8b64c}

Probably caused by : ntkrnlmp.exe ( nt!KiCommitThreadWait+cc )

Followup: MachineOwner
---------

BugCheck A, {fffff800bec5cbd4, 2, 0, fffff80002adc43c}

*** WARNING: Unable to verify timestamp for mssmbios.sys
*** ERROR: Module load completed but symbols could not be loaded for mssmbios.sys
Probably caused by : intelppm.sys ( intelppm!C1Halt+2 )

Followup: MachineOwner
---------
BugCheck 3B, {c0000005, fffff80002b6c94c, fffff88008da8110, 0}

Probably caused by : intelppm.sys ( intelppm!C1Halt+2 )

Followup: MachineOwner
---------
BugCheck 9F, {3, fffffa8002e8f060, fffff80000b9c518, fffffa8004a6f8c0}

Probably caused by : pci.sys

Followup: MachineOwner
BugCheck A0, {b, 8fede000, 3, 903a000}

Probably caused by : ntkrnlmp.exe ( nt!PopWriteHiberPages+a3 )

Followup: MachineOwner
---------

---------
Let us know if you need help

Tuan

http://www.sevenforums.com/bsod-help-support/97816-random-bsods.html
Relevancy 46.87%

Hello,
Ive been getting random BSODs at anytime. Nothing in particular causes it. Sometimes its when Im gaming and sometimes its when Im browsing the web. Generally a system exception error, and Ive tried most of the fixes that Ive found for that. Plus, whenever the computer goes to sleep and is woken up the screen flashes / bugs out and is frozen. The sound continues to work but everything is frozen or bugged. I dont know if that is related to any of the bsods. Just seeing if anyone has any ideas.
Thanks,
Austin

A:Random BSODs

Update the KIiller Wireless LAN Drivers from MSI Global | Motherboard - The world leader in motherboard design . See how it goes. Let us know.
_______________________________________________________________________

Code:
BugCheck 50, {ffffd0002725c000, 2, fffff80052d98d75, 0}

*** WARNING: Unable to verify timestamp for Qcamainx64.sys
*** ERROR: Module load completed but symbols could not be loaded for Qcamainx64.sys

Could not read faulting driver name
Probably caused by : Qcamainx64.sys ( Qcamainx64+118d75 )

Followup: MachineOwner
---------
Avast next

http://www.tenforums.com/bsod-crashes-debugging/41512-random-bsods.html
Relevancy 46.87%

Please Help Hoping someone here can help me Random BSODs with my BSOD's The latest one knocked me out of a Game But the others all happened out of nowhere This is a Fresh Install of Vista Ultimate x Don't seem to be getting many Obvious Windows Errors But ive been getting alot of APP Crashes of all sorts From Windows Explorer stopped working to Comodo browser Stopped working etc Was having an issue with AMD Catalyst but ive recently removed the Catalyst amd vision and that startup error stopped Now i just get random BSODs no initial start-up errors I was thinking it was probably a memory issue But this is New RAM x gb Corsair Vengeance and i know just because its new does not mean my system does not like it and or its not bad Vista X is installed on a Kingston HyperX gb SSD not sure if these issues are bios SSD Related Have held off on upgrading Bios unless instructed Can't think of anything else that is worth mentioning Attached Dump Files EDIT I Uploaded Attachment But it isnt showing it here Random BSODs D pSt ck zip

A:Random BSODs

Welcome
Files do not seem to be attached. Please follow these instructions and upload all the necessary files
Blue Screen of Death (BSOD) Posting Instructions

http://www.vistax64.com/crashes-debugging/299522-random-bsods.html
Relevancy 46.87%

Hello,

I have recently replaced my motherboard and my processor and since the upgrade I have been experiencing random bluescreens. At the time I was running win7 and the error codes I got were:
irql_not_less_or_equal
page_fault_in_nonpaged_area
system_thread_exception_not_handled

I ran memtest86+ for 20h without finding any errors and began suspecting it was a driver issue.
Did a fresh install of win7 but the problems continued and I figured I'd try win8 instead.

The bluescreens seemed to go away for a couple of days but now they've returned. WhoCrashed suggests that it's related to my video card (nvidia gtx 580, drivers v320.49) but I can't tell if I damaged the card in the upgrade or if it's the drivers. The card and the same drivers were used in the old setup without problems.

Thank you for any help!

A:Random BSODs

Unplug the system from the wall, remove the video card (using anti-static precautions), clean the slot out with canned air, reinsert the video card making sure that it's firmly and correctly seated, reconnect everything (making sure everything is firmly connected) and test.

You have 4 hard drives. What is the make/model/wattage and age of your Power Supply?

SSD's were temperamental when they first came out, but their reliability has improved greatly over the last year or two. There are 2 things that MUST be checked on systems with BSOD's and SSD's:




1) That the SSD firmware is the latest available for the SSD
2) That the storage controller drivers on the motherboard are the most recent. They must date from late 2012 or later. This is ALL controllers, not just the one that the SSD is attached to.



These devices have problems in Device Manager:





SM Bus Controller PCI\VEN_8086&DEV_8C22&SUBSYS_50011458&REV_04\3&11583659&0&FB The drivers for this device are not installed.

Microsoft Basic Display Adapter PCI\VEN_8086&DEV_0412&SUBSYS_D0001458&REV_06\3&11583659&0&10 This device is not working properly because Windows cannot load the drivers required for this device.



The first one is likely a part of your chipset drivers - please install them. The second is likely related to your video card - have you installed the latest, Win8 compatible drivers for your nVidia card (available from Drivers | GeForce )?

I'm pretty certain that this is a problem with the hardware on the video card (you've replaced the drivers numerous times without success). After you've removed/reinstalled the video card (and given us the specs on your PSU) then I'd suggest trying the video stress tests listed here: Additional Hardware Diagnostics

The final test will be to replace the video card with another one (if you have another one on hand that you know is good). If you don't have one, then you'll have to purchase one. Please be sure to purchase it from a retailer that will allow returns and full refunds of your money (in case you don't need it). This could also (for example) be a problem with the motherboard (I ran into this at work last week) - so be sure to complete all tests.

Analysis:
The following is for informational purposes only.

Code:
**************************Thu Sep 5 13:31:44.579 2013 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\090513-6937-01.dmp]
Windows 8 Kernel Version 9200 MP (8 procs) Free x64
Built by: 9200.16628.amd64fre.win8_gdr.130531-1504
System Uptime:0 days 0:08:53.190
Probably caused by :dxgmms1.sys ( dxgmms1!VidMmInterface+2b674 )
BugCheck 1000007E, {ffffffffc0000005, fffff88003e624f4, fffff8800368e188, fffff8800368d9c0}
BugCheck Info: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e)
Arguments:
Arg1: ffffffffc0000005, The exception code that was not handled
Arg2: fffff88003e624f4, The address that the exception occurred at
Arg3: fffff8800368e188, Exception Record Address
Arg4: fffff8800368d9c0, Context Record Address
PROCESS_NAME: System
BUGCHECK_STR: AV
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
FAILURE_BUCKET_ID: AV_dxgmms1!VidMmInterface
CPUID: "Intel(R) Core(TM) i7-4770K CPU @ 3.50GHz"
MaxSpeed: 3500
CurrentSpeed: 3500
BIOS Version F4
BIOS Release Date 05/16/2013
Manufacturer Gigabyte Technology Co., Ltd.
Product Name Z87-D3HP
??????????????????????????????????????????????????????????????????????????????????????``
**************************Thu Sep 5 13:19:04.230 2013 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\090513-9359-01.dmp]
Windows 8 Kernel Version 9200 MP (8 procs) Free x64
Built by: 9200.16628.amd64fre.win8_gdr.130531-1504
System Uptime:0 days 0:20:36.841
Probably caused by :ntkrnlmp.exe ( nt!NtWa... Read more

http://www.eightforums.com/bsod-crashes-debugging/30778-random-bsods.html
Relevancy 46.87%

I'm getting random BSODs for the last week with error code 50. I ran memtest overnight and had 20 successful passes to make sure it wasn't bad memory. I also stepped up the voltage to my memory to make sure it wasn't undervolted, but that didn't fix it.
The BSOD is random -- not related to system stress. If I stress my computer with linx/occt/prime95, I don't get BSOD. The times I've gotten it, it occured when I was resuming from screensaver, surfing the web, and once while playing half life 2.
I'm running x64 Windows 7 Enterprise.
I've attached my minidumps. If you need more information let me know. Any help or thoughts are appreciated.

A:Random BSODs with BCC 50

  
Quote: Originally Posted by steve88


I'm getting random BSODs for the last week with error code 50. I ran memtest overnight and had 20 successful passes to make sure it wasn't bad memory. I also stepped up the voltage to my memory to make sure it wasn't undervolted, but that didn't fix it.
The BSOD is random -- not related to system stress. If I stress my computer with linx/occt/prime95, I don't get BSOD. The times I've gotten it, it occured when I was resuming from screensaver, surfing the web, and once while playing half life 2.
I'm running x64 Windows 7 Enterprise.
I've attached my minidumps. If you need more information let me know. Any help or thoughts are appreciated.


Hi Steve and welcome

These crashes were caused by two things Your AVG, and some really old drivers.
I would remove AVG and replace it with Microsoft Security Essentials and update the drivers listed below

Let us know if you need assistance with any of this

Jan

Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\K\Desktop\New folder\082910-16224-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

WARNING: Whitespace at end of path element
Symbol search path is: SRV*C:\symbols;*http://msdl.microsoft.com/download/symbols ;srv*e:\symbols
*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Machine Name:
Kernel base = 0xfffff800`02a5e000 PsLoadedModuleList = 0xfffff800`02c9be50
Debug session time: Sun Aug 29 13:48:49.722 2010 (GMT-4)
System Uptime: 0 days 2:00:32.628
Loading Kernel Symbols
...............................................................
................................................................
.................................
Loading User Symbols
Loading unloaded module list
....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 50, {ffffffffffffffc8, 1, fffff80002aed107, 0}

Unable to load image avgntflt.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for avgntflt.sys
*** ERROR: Module load completed but symbols could not be loaded for avgntflt.sys

Could not read faulting driver name
Probably caused by : avgntflt.sys ( avgntflt+14919 )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced. This cannot be protected by try-except,
it must be protected by a Probe. Typically the address is just plain bad or it
is pointing at freed memory.
Arguments:
Arg1: ffffffffffffffc8, memory referenced.
Arg2: 0000000000000001, value 0 = read operation, 1 = write operation.
Arg3: fffff80002aed107, If non-zero, the instruction address which referenced the bad memory
address.
Arg4: 0000000000000000, (reserved)

Debugging Details:
------------------
Could not read faulting driver name

WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff80002d060e0
ffffffffffffffc8

FAULTING_IP:
nt!C... Read more

http://www.sevenforums.com/bsod-help-support/108020-random-bsods-bcc-50-a.html
Relevancy 46.87%

I've been having these crashes for about a week. It usually happens when i'm watching South Park here: SpFreak.com - Watch All South Park Episodes Online Free!

Also: I do not have a floppy drive. I have no idea why the Device Manager say otherwise. I turned it off.

[edit]
And what on earth is AMD Virtualization and why is it turned off in my BIOS ?
[/edit]

[edit2]
BTW. I just flashed my BIOS to version F3. This update slowed down my RAM. It went from 1600 to 1066. When i manually changed RAM speed, computer crashed moments before desktop showed. And my RAM is designed to run @1600 :/
[/edit]

[edit3]
Turned off floppy in BIOS. No longer an issue.
[/edit]

A:Random BSODs

There are problems with your Floppy Disk controller. This is a part that's built onto the motherboard. The easiest thing to do is to go into the BIOS and disable anything related to the Floppy Drive.

Virtualization is a function that'll enable you to use the advanced virtualization features of Win7 (running one OS within another OS). I'm not familiar with the AMD processors - but I'd suspect that you can't use the built in XP virtual machine in your copy of Win7

For the memory issues, read the documentation for the BIOS update to see if it refers to memory issues.
Can you flash back to the previous version?
Please run this memory test to see if there's any issues with your memory: Memory Diagnostics (read the details at the link)

The memory dump files point at a lot of different things. Since this is usually a symptom of a hardware/compatibility issue, I'd suggest running these free test:





Quote:
H/W Diagnostics:
Please start by running these bootable hardware diagnostics:
Memory Diagnostics (read the details at the link)
HD Diagnostic (read the details at the link)

Also, please run one of these free, independent online malware scans to ensure that your current protection hasn't been compromised: Malware (read the details at the link)

Then, if the above tests pass, I'd try these free stress tests:





Quote:
FurMark download site: FurMark: VGA Stress Test, Graphics Card and GPU Stability Test, OpenGL Benchmark and GPU Temperature | oZone3D.Net
FurMark Setup:
- If you have more than one GPU, select Multi-GPU during setup
- In the Run mode box, select "Stability Test" and "Log GPU Temperature"
Click "Go" to start the test
- Run the test until the GPU temperature maxes out - or until you start having problems (whichever comes first).
- Click "Quit" to exit







Quote:
Prime95 download site: Free Software - GIMPS
Prime95 Setup:
- extract the contents of the zip file to a location of your choice
- double click on the executable file
- select "Just stress testing"
- select the "Blend" test. If you've already run MemTest overnight you may want to run the "Small FFTs" test instead. (run all 3 if you find a problem and note how long it takes to error out with each)
- "Number of torture test threads to run" should equal the number of CPU's times 2 (if you're using hyperthreading).
The easiest way to figure this out is to go to Task Manager...Performance tab - and see the number of boxes under CPU Usage History
Then run the test for 6 to 24 hours - or until you get errors (whichever comes first).
This won't necessarily crash the system - but check the output in the test window for errors.
The Test selection box and the stress.txt file describes what components that the program stresses.







Quote:
Two other video stress tests (may be more stressful than FurMark):
Video Memory stress Test - http://nvworld.ru/utilities/vmt/
Artifact Locator - http://nvworld.ru/utilities/alocator/
Sorry, but I don't read the language that this website is made in.





FWIW - your Logitech device drivers are very out of date and should be updated also.

BSOD BUGCHECK SUMMARY
Code:

Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Mon Sep 6 12:02:46.788 2010 (UTC - 4:00)
System Uptime: 0 days 4:22:48.332
BugCheck 7F, {8, 80050031, 6f8, fffff80002ad2da2}
Probably caused by : NETIO.SYS ( NETIO!CompareSecurityContexts+6a )
BUGCHECK_STR: 0x7f_8
PROCESS_NAME: System
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Fri Sep 3 16:18:01.271 2010 (UTC - 4:00)
System Uptime: 0 days 6:21:48.956
BugCheck 1000007E, {ffffffffc0000005, fffff80002cd98e9, fffff88002fa89c8, fffff88002fa8230}
Probably caused by : ntkrnlmp.exe ( nt!CmpDelayCloseWorker+... Read more

http://www.sevenforums.com/bsod-help-support/109452-random-bsods.html
Relevancy 46.87%

I've been getting hard restarts and intermittent BSODs (at least once a day). This wasn't happening when I first got the system, but started after about a month or so. I wasn't able to glean any information from the minidumps myself, so maybe someone here can provide more info.

Thank you.

? OS - Windows 7
? x64
? What was original installed OS on system? Windows 7
? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)? OEM
? Age of system (hardware) - < 2 months
? Age of OS installation - have you re-installed the OS? No

? CPU - Intel Xeon E5-1650 @ 3.20GHz
? Video Card - NVIDIA Quadro 2000
? MotherBoard - Dell 08HPGT
? Power Supply - Unknown

? System Manufacturer - Dell Precision T3600

Laptop or Desktop? Desktop

A:Random BSODs

The last 4 being either memory corruption or code corruption
BugCheck A, {ffffffff837074c9, 2, 1, fffff80002d2da99}
BugCheck 3B, {c0000005, fffff80002cc9656, fffff880098ed100, 0}
BugCheck A, {ffffffff837074c9, 2, 1, fffff80002d4aa99}
BugCheck 3B, {c0000005, fffff80002c7a656, fffff8800acd5100, 0}

I would start with Memtest86+> D/L Memtest+ > How to perform a MemTest86+ Test | Tech Support Forum


Code:

Debug session time: Thu Mar 27 09:46:46.723 2014 (UTC - 4:00)
Loading Dump File [C:\Users\Owner\Bsodapps\SysnativeBSODApps\032714-7784-01.dmp]
Built by: 7601.22436.amd64fre.win7sp1_ldr.130828-1532
System Uptime: 0 days 5:08:38.910
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : memory_corruption
BugCheck A, {ffffffff837074c9, 2, 1, fffff80002d2da99}
BugCheck Info: IRQL_NOT_LESS_OR_EQUAL (a)
Bugcheck code 0000000A
Arguments:
Arg1: ffffffff837074c9, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff80002d2da99, address which referenced memory
BUGCHECK_STR: 0xA
DEFAULT_BUCKET_ID: CODE_CORRUPTION
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_MEMORY_CORRUPTION_ONE_BYTE
MaxSpeed: 3200
CurrentSpeed: 3192
BiosVersion = A11
BiosReleaseDate = 08/09/2013
SystemManufacturer = Dell Inc.
SystemProductName = Precision T3600
??????????????????????????????????????????????????????????????????????????????????????``
Debug session time: Thu Mar 27 04:36:39.234 2014 (UTC - 4:00)
Loading Dump File [C:\Users\Owner\Bsodapps\SysnativeBSODApps\032714-6864-02.dmp]
Built by: 7601.22436.amd64fre.win7sp1_ldr.130828-1532
System Uptime: 0 days 2:19:37.331
Probably caused by : hardware ( nt!KiSystemCall64+116 )
BugCheck 3B, {c0000005, fffff80002cc9656, fffff880098ed100, 0}
BugCheck Info: SYSTEM_SERVICE_EXCEPTION (3b)
Bugcheck code 0000003B
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff80002cc9656, Address of the instruction which caused the bugcheck
Arg3: fffff880098ed100, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.
BUGCHECK_STR: 0x3B
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: Smc.exe
FAILURE_BUCKET_ID: X64_IP_MISALIGNED
MaxSpeed: 3200
CurrentSpeed: 3192
BiosVersion = A11
BiosReleaseDate = 08/09/2013
SystemManufacturer = Dell Inc.
SystemProductName = Precision T3600
??????????????????????????????????????????????????????????????????????????????????????``
Debug session time: Thu Mar 27 02:15:32.182 2014 (UTC - 4:00)
Loading Dump File [C:\Users\Owner\Bsodapps\SysnativeBSODApps\032714-6864-01.dmp]
Built by: 7601.22436.amd64fre.win7sp1_ldr.130828-1532
System Uptime: 0 days 6:59:11.925
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : memory_corruption
BugCheck A, {ffffffff837074c9, 2, 1, fffff80002d4aa99}
BugCheck Info: IRQL_NOT_LESS_OR_EQUAL (a)
Bugcheck code 0000000A
Arguments:
Arg1: ffffffff837074c9, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff80002d4aa99, address which referenced memory
BUGCHECK_STR: 0xA
DEFAULT_BUCKET_ID: CODE_CORRUPTION
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_MEMORY_CORRUPTION_ONE_BYTE
MaxSpeed: 3200
CurrentSpeed: 3192
BiosVersion = A11
BiosReleaseDate = 08/09/2013
SystemManufacturer = Dell Inc.
SystemProductName = Precision T3600
??????????????????????????????????????????????????????????????????????????????????????``
Debug session time: Wed Mar 26 19:14:47... Read more

http://www.techsupportforum.com/forums/f299/random-bsods-815914.html
Relevancy 46.87%

Hello everyone,

I have recently purchased a new ASUS laptop. Until two weeks ago, everyone was fine, then I got my first BSOD. I changed the sound drivers and things seemed to have been fixed, but now I had two random BSODs today as well. I've followed the directions on posting, hope you guys can help.

Is Windows 7 . . .
- x64
- the original installed OS on the system
- an OEM


- What is the age of system (hardware)?3 months
- What is the age of OS installation? 1 month

A:Please help with random BSODs

Completely uninstall Zone alarm
with the uninstall tool
Zone Alarm Uninstall Tool http://forums.zonealarm.com/showthread.php?t=70034 and hotfix
http://support.microsoft.com/kb/981180
You may try using the hot fix suggested by MS, in lieu of uninstalling ZA. If the hot fix is not successful an uninstall will be required.

A representative dump file. Two indicated ZA, one was inconclusive, other than indicating drivers

Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.

Loading Dump File [C:\Users\richc46\AppData\Local\Temp\Temp1_BSODflashywinger7[1].zip\Windows_NT6_BSOD_jcgriff2\090810-14944-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Machine Name:
Kernel base = 0xfffff800`0304a000 PsLoadedModuleList = 0xfffff800`03287e50
Debug session time: Wed Sep 8 21:49:05.453 2010 (GMT-4)
System Uptime: 0 days 0:21:07.045
Loading Kernel Symbols
...............................................................
................................................................
................................
Loading User Symbols
Loading unloaded module list
.....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 7F, {8, 80050031, 6f8, fffff80003082d28}
Probably caused by : NETIO.SYS ( NETIO!CompareSecurityContexts+6a )
Followup: MachineOwner
---------
2: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
UNEXPECTED_KERNEL_MODE_TRAP (7f)
This means a trap occurred in kernel mode, and it's a trap of a kind
that the kernel isn't allowed to have/catch (bound trap) or that
is always instant death (double fault). The first number in the
bugcheck params is the number of the trap (8 = double fault, etc)
Consult an Intel x86 family manual to learn more about what these
traps are. Here is a *portion* of those codes:
If kv shows a taskGate
use .tss on the part before the colon, then kv.
Else if kv shows a trapframe
use .trap on that value
Else
.trap on the appropriate frame will show where the trap was taken
(on x86, this will be the ebp that goes with the procedure KiTrap)
Endif
kb will then show the corrected stack.
Arguments:
Arg1: 0000000000000008, EXCEPTION_DOUBLE_FAULT
Arg2: 0000000080050031
Arg3: 00000000000006f8
Arg4: fffff80003082d28
Debugging Details:
------------------

BUGCHECK_STR: 0x7f_8
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
CURRENT_IRQL: 2
LAST_CONTROL_TRANSFER: from fffff800030b9ca9 to fffff800030ba740
STACK_TEXT:
fffff880`03169ce8 fffff800`030b9ca9 : 00000000`0000007f 00000000`00000008 00000000`80050031 00000000`000006f8 : nt!KeBugCheckEx
fffff880`03169cf0 fffff800`030b8172 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiBugCheckDispatch+0x69
fffff880`03169e30 fffff800`03082d28 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiDoubleFaultAbort+0xb2
... Read more

http://www.sevenforums.com/bsod-help-support/110031-please-help-random-bsods.html
Relevancy 46.87%

I checked ram with hci test and cpu stability with prime95, everything went smoothly and without errors. But i got 2 bsods afterwards when i tried to type url in firefox.

A:random bsods on 8.1

Hello and welcome to the forum.
You might want to roll back to older drivers for MAudio Mobile Pre Music Recorder:
HOW TO: Use the Driver Roll Back Feature to Restore a Previous Version of a Device Driver in Windows XP

Code:
Loading Dump File [C:\Users\USER\Downloads\SF_15-10-2013\SF_15-10-2013\101413-4812-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 8 Kernel Version 9600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 9600.16384.amd64fre.winblue_rtm.130821-1623
Machine Name:
Kernel base = 0xfffff803`fde14000 PsLoadedModuleList = 0xfffff803`fe0db9b0
Debug session time: Mon Oct 14 18:53:58.645 2013 (UTC + 6:00)
System Uptime: 0 days 5:29:55.300
Loading Kernel Symbols
...............................................................
................................................................
..................................
Loading User Symbols
Loading unloaded module list
.......
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 7F, {8, fffff803ffb18e70, fffff803ffb02f80, fffff80002841574}
*** WARNING: Unable to verify timestamp for MAudioMobilePreII.sys
*** ERROR: Module load completed but symbols could not be loaded for MAudioMobilePreII.sys
Probably caused by : MAudioMobilePreII.sys ( MAudioMobilePreII+13663 )
Followup: MachineOwner
---------
0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
UNEXPECTED_KERNEL_MODE_TRAP (7f)
This means a trap occurred in kernel mode, and it's a trap of a kind
that the kernel isn't allowed to have/catch (bound trap) or that
is always instant death (double fault). The first number in the
bugcheck params is the number of the trap (8 = double fault, etc)
Consult an Intel x86 family manual to learn more about what these
traps are. Here is a *portion* of those codes:
If kv shows a taskGate
use .tss on the part before the colon, then kv.
Else if kv shows a trapframe
use .trap on that value
Else
.trap on the appropriate frame will show where the trap was taken
(on x86, this will be the ebp that goes with the procedure KiTrap)
Endif
kb will then show the corrected stack.
Arguments:
Arg1: 0000000000000008, EXCEPTION_DOUBLE_FAULT
Arg2: fffff803ffb18e70
Arg3: fffff803ffb02f80
Arg4: fffff80002841574
Debugging Details:
------------------


BUGCHECK_STR: 0x7f_8
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: System
CURRENT_IRQL: 2
LAST_CONTROL_TRANSFER: from fffff803fdf6fbe9 to fffff803fdf640a0
STACK_TEXT:
fffff803`ffb18d28 fffff803`fdf6fbe9 : 00000000`0000007f 00000000`00000008 fffff803`ffb18e70 fffff803`ffb02f80 : nt!KeBugCheckEx
fffff803`ffb18d30 fffff803`fdf6dcf4 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiBugCheckDispatch+0x69
fffff803`ffb18e70 fffff800`02841574 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiDoubleFaultAbort+0xb4
fffff803`ffb02f80 fffff800`028414a0 : ffffe000`00b2ba60 fffff800`028523e0 ffffe000`02169110 00000000`00000000 : usbccgp!DispatchPdoUrb+0x64
fffff80... Read more

http://www.eightforums.com/bsod-crashes-debugging/32893-random-bsods-8-1-a.html
Relevancy 46.87%

Hey guys,

Little help please. I've been getting random BSODs. Once I left my pc while defragmenting using smart defrag. Multiple times while running ccleaner. And another time, I wasn't doing anything I just went downstairs to grab a bite and when I returned I found my pc turned off. All these BSODs happened while I was away doing something else. I'd come back to find my already off pc.

Any clues? Attached are the required files as indicated in the instructions. Any help would be greatly appreciated.

A:Random BSODs while I'm away

Code:
*** WARNING: Unable to verify timestamp for fet6x64.sys
*** ERROR: Module load completed but symbols could not be loaded for fet6x64.sys
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1000007E, {ffffffffc0000005, fffff88001738d70, fffff8800a56c058, fffff8800a56b8b0}

Probably caused by : fet6x64.sys ( fet6x64+4466 )

Followup: MachineOwner
---------

0: kd> lmvm fet6x64
start end module name
fffff880`041e0000 fffff880`041ebb00 fet6x64 T (no symbols)
Loaded symbol image file: fet6x64.sys
Image path: \SystemRoot\system32\DRIVERS\fet6x64.sys
Image name: fet6x64.sys
Timestamp: Thu Jun 19 21:10:18 2008 (485A45A2)
CheckSum: 00016513
ImageSize: 0000BB00
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Update the very old network drive from this site:
VIA Drivers Download - VIA Technologies, Inc.

Uninstall Daemon Tools or other virtual DVD mounting software - thse use the sptd driver which is a well documented cause of BSOD's, and it is contributing to your system instability.

Code:
fffff880`0a56c0a8 00000000`00000054
fffff880`0a56c0b0 00000000`00000007
fffff880`0a56c0b8 fffff880`010cff2aUnable to load image \SystemRoot\System32\Drivers\sptd.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for sptd.sys
*** ERROR: Module load completed but symbols could not be loaded for sptd.sys
sptd+0x4ef2a
fffff880`0a56c0c0 00000000`00000000
fffff880`0a56c0c8 00000000`00000001
fffff880`0a56c0d0 00000000`00000004
Reboot, then use as normal and report back.

http://www.sevenforums.com/bsod-help-support/354797-random-bsods-while-im-away.html
Relevancy 46.87%

Hello all,

A friend of mine is having BSODs randomly (well so he says) and he has asked me to take a look for him. He would have posted here himself, but he hasn't got any internet connection at the moment.

I think it's hardware, but hey, what do I know Could someone take a look please?

Sorry it's not been done with the JCGriff tool, but he gave me these on a flash drive today so I thought we could just work with them and get him to do that if we need to.

Thanks in advance,

Tom

A:Random BSODs

  
Quote: Originally Posted by tom982


Hello all,

A friend of mine is having BSODs randomly (well so he says) and he has asked me to take a look for him. He would have posted here himself, but he hasn't got any internet connection at the moment.

I think it's hardware, but hey, what do I know Could someone take a look please?

Sorry it's not been done with the JCGriff tool, but he gave me these on a flash drive today so I thought we could just work with them and get him to do that if we need to.

Thanks in advance,

Tom


Tom Sorry about the delay
A critical process was abruptly terminated. Perhaps ram, or a driver. Please run these two tests to find out which

1-Memtest.

*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

RAM - Test with Memtest86+

2-Driver verifier






Quote:
I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.


Driver Verifier - Enable and Disable

Old drivers needing updating

Code:
OA002Afx.sys 6/8/2007 4:00:36 AM fffff880`06065000 fffff880`06098f80 0x00033f80 0x46690ca4
vhidmini.sys 9/28/2007 1:21:57 PM fffff880`05df9000 fffff880`05dfc680 0x00003680 0x46fd3835
OA002Ufd.sys 6/3/2008 5:30:37 AM fffff880`06600000 fffff880`066293a0 0x000293a0 0x48450f3d
OA002Vid.sys 8/1/2008 5:34:52 AM fffff880`069a2000 fffff880`069ecd80 0x0004ad80 0x4892d8bc
How To Find Drivers:




Quote:
- search Google for the name of the driver
- compare the Google results with what's installed on your system to figure out which device/program it belongs to
- visit the web site of the manufacturer of the hardware/program to get the latest drivers (DON'T use Windows Update or the Update driver function of Device Manager).
- if there are difficulties in locating them, post back with questions and someone ... Read more

http://www.sevenforums.com/bsod-help-support/192365-random-bsods.html
Relevancy 46.87%

Hi, I would greatly appreciate any help with solving my BSODs related PC issues. I get blue screens randomly when browsing the internet, playing WoW, watching videos, even got one when I was AFK.
In the attachment there are specs of my computer exported from msinfo32, as well as some of the last minidumps. When I viewed them in BlueScreenView, I noticed that they are caused mostly by ntoskrnl.exe, with various error messages (MEMORY_MANAGEMENT, SYSTEM_SERVICE_EXCEPTION etc.)
Thanks in advance

A:Random BSODs

  
Quote: Originally Posted by majkl


Hi, I would greatly appreciate any help with solving my BSODs related PC issues. I get blue screens randomly when browsing the internet, playing WoW, watching videos, even got one when I was AFK.
In the attachment there are specs of my computer exported from msinfo32, as well as some of the last minidumps. When I viewed them in BlueScreenView, I noticed that they are caused mostly by ntoskrnl.exe, with various error messages (MEMORY_MANAGEMENT, SYSTEM_SERVICE_EXCEPTION etc.)
Thanks in advance


Memory corruption probably caused by a driver. You do realize that you have driver verifier running right?

I would run memtest after turning verifier off, then re-enable verifier and run it to catch which driver.
1-Memtest.

*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

RAM - Test with Memtest86+

2-Driver verifier






Quote:
I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.


Driver Verifier - Enable and Disable

http://www.sevenforums.com/bsod-help-support/190850-random-bsods.html
Relevancy 46.87%

I wanted to do the Windows_NT6_BSOD_v3.03_jcgriff2_ thing,
but when I did it, my laptop shut down automatically.
I don't know whether the file is finished or not, but I really want to escape from BSoDs
Please Help! Thanks so much

A:Random BSoDs

I ran the last 4 and basically have 3 different causes.

Code:
Debug session time: Sat May 11 08:39:00.434 2013 (UTC - 4:00)
Loading Dump File [C:\Users\Owner\Bsodapps\SysnativeBSODApps\051113-22573-01.dmp]
Built by: 7601.18113.x86fre.win7sp1_gdr.130318-1533
System Uptime: 0 days 0:48:19.245
*** ERROR: Module load completed but symbols could not be loaded for Ntfs.sys
Probably caused by : memory_corruption ( nt!MiLockProtoPoolPage+1d0 )
BugCheck 100000D1, {0, 2, 8, 0}
BugCheck Info: DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
Bugcheck code 000000d1
Arguments:
Arg1: 00000000, memory referenced
Arg2: 00000002, IRQL
Arg3: 00000008, value 0 = read operation, 1 = write operation
Arg4: 00000000, address which referenced memory
PROCESS_NAME: svchost.exe
BUGCHECK_STR: 0xD1
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
FAILURE_BUCKET_ID: 0xD1_CODE_AV_NULL_IP_nt!MiLockProtoPoolPage+1d0
BiosVersion = 15CN23WW(V1.06)
BiosReleaseDate = 03/31/2009
SystemManufacturer = LENOVO
SystemProductName = 20017
??????????????????????????????????????????????????????????????????????????????????????``
Debug session time: Sat May 11 02:35:55.757 2013 (UTC - 4:00)
Loading Dump File [C:\Users\Owner\Bsodapps\SysnativeBSODApps\051113-22822-01.dmp]
Built by: 7601.18113.x86fre.win7sp1_gdr.130318-1533
System Uptime: 0 days 0:08:43.583
Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )
BugCheck 10000050, {2e4cdb08, 0, a0bb56, 8}
BugCheck Info: PAGE_FAULT_IN_NONPAGED_AREA (50)
Bugcheck code 00000050
Arguments:
Arg1: 2e4cdb08, memory referenced.
Arg2: 00000000, value 0 = read operation, 1 = write operation.
Arg3: 00a0bb56, If non-zero, the instruction address which referenced the bad memory
address.
Arg4: 00000008, (reserved)
BUGCHECK_STR: 0x50
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: League of Lege
BiosVersion = 15CN23WW(V1.06)
BiosReleaseDate = 03/31/2009
SystemManufacturer = LENOVO
SystemProductName = 20017
??????????????????????????????????????????????????????????????????????????????????????``
Debug session time: Sat May 11 01:49:04.502 2013 (UTC - 4:00)
Loading Dump File [C:\Users\Owner\Bsodapps\SysnativeBSODApps\051113-25662-01.dmp]
Built by: 7601.18113.x86fre.win7sp1_gdr.130318-1533
System Uptime: 0 days 1:32:47.328
Probably caused by : memory_corruption
BugCheck 1000008E, {c0000005, 82c81fa4, a6944ca8, 0}
BugCheck Info: KERNEL_MODE_EXCEPTION_NOT_HANDLED_M (1000008e)
Bugcheck code 1000008E
Arguments:
Arg1: c0000005, The exception code that was not handled
Arg2: 82c81fa4, The address that the exception occurred at
Arg3: a6944ca8, Trap Frame
Arg4: 00000000
BUGCHECK_STR: 0x8E
DEFAULT_BUCKET_ID: CODE_CORRUPTION
PROCESS_NAME: svchost.exe
FAILURE_BUCKET_ID: MEMORY_CORRUPTION_STRIDE
BiosVersion = 15CN23WW(V1.06)
BiosReleaseDate = 03/31/2009
SystemManufacturer = LENOVO
SystemProductName = 20017
??????????????????????????????????????????????????????????????????????????????????????``
Debug session time: Fri May 10 06:36:04.412 2013 (UTC - 4:00)
Loading Dump File [C:\Users\Owner\Bsodapps\SysnativeBSODApps\051013-63086-01.dmp]
Built by: 7601.18113.x86fre.win7sp1_gdr.130318-1533
System Uptime: 0 days 2:30:58.238
Probably caused by : ntkrpamp.exe ( nt!EtwpGetPerfCounter+8 )
BugCheck 10000050, {f1200000, 8, f1200000, 2}
BugCheck Info: PAGE_FAULT_IN_NONPAGED_AREA (50)
Bugcheck code 00000050
Arguments:
Arg1: f1200000, memory referenced.
Arg2: 00000008, value 0 = read operation, 1 = write operation.
Arg3: f1200000, If non-zero, the instruction address which referenced the bad memory
address.
Arg4: 00000002, (reserved)
BUGCHECK_STR: 0x50
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: League of Lege
FAILURE_BUCKET_ID: 0x50_nt!EtwpGetPerfCounter+8
BiosVersion = 15CN23WW(V1.06)
BiosReleaseDate = 03/31/2009
SystemManufacturer = LENOVO
SystemProductName = 20017
Usually means a hardware issue lets check the ram.
D/L Memtest+ burn it to a CD using a free program like ... Read more

http://www.techsupportforum.com/forums/f299/random-bsods-695062.html
Relevancy 46.87%

Hi all,
 
I'm having an issue where this happens: If I go on Firefox, after a few minutes, it'll blue-screen, with the exact same error code! (IRQL_NOT_LESS_OR_EQUAL/0xA) I don't know if it's Firefox that is causing this, because it only happens when Firefox is running, or if it's something more serious...
 
What could this mean?
~yosefu_kun_98.

A:Random BSoDs (0xA)

Please download and install Speccy to provide us with information about your computer.  When  FileHippo opens, click on Download latest version in the upper right pane.
 
When Speccy opens you will see a screen similar to the one below.
 

 
Click on File which is outlined in red in the screen above, and then click on Publish Snapshot.
 
The following screen will appear, click on Yes.
 

 
The following screen will appear, click on Copy to Clipboard.
 

 
In your next post right click inside the Reply to Topic box, then click on Paste.  This will load a link to the Speccy log.
 
 

Please download MiniToolBox, save it to your desktop and run it.
 
Checkmark the following checkboxes:
 
• List last 10 Event Viewer log
• List Installed Programs
• List Users, Partitions and Memory size.
• List Minidump Files
 
Click on Go to start the scan.  Once it is finished highlight the text, copy it and paste it in your next post.

http://www.bleepingcomputer.com/forums/t/551797/random-bsods-0xa/
Relevancy 46.87%

I'm getting random BSODs. The files are attached.

Operating System:
Windows 7 32-bit

Original Operating System
Windows XP

OEM version or full retail version
Full retail version

Age of System
1 year

Age of OS installation - have you reinstalled the OS?
6 Months / Yes

CPU
AMD Phenom II X2 550, Callisto 45nm Technology

Video Card
1024MB ATI Radeon HD 5700 Series (Gigabyte)

Motherboard
FOXCONN A7VMX-K (Socket 940)

A:Random BSODs.

Hi,

Various bugchecks based of the dumps attached:

Before moving on to troubleshooting however,

Update to Service Pack 1 ASAP: Learn how to install Windows 7 Service Pack 1 (SP1)


ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY (fc)


Quote:




An attempt was made to execute non-executable memory.




If we take a look at the call stack, we can see:

9d047d28 82a906da dxgkrnl!DxgkGetScanLine+0x7d

dxgkrnl = DirectX Kernel driver.

add that up with your UNEXPECTED_KERNEL_MODE_TRAP (7f) dump which is mentioning throughout and on the call stack atikmdag.sys (ATI/AMD video driver) we likely have a video card driver issue.

Ensure you have the latest video card drivers. If you are already on the latest video card drivers, uninstall and install a version or a few versions behind the latest to ensure it's not a latest driver only issue. If you have already experimented with the latest video card driver and many previous versions, please give the beta driver for your card a try.

I'm also seeing MEMORY_MANAGEMENT (1a) as a bugcheck here, so if the above advice in regards to video drivers does not help, run a Memtest for no less than ~8 passes to check your memory for errors:

Memtest86+:


Quote:




Download Memtest86+ here:





Quote:





http://www.memtest.org/

Which should I download?

You can either download the pre-compiled ISO that you would burn to a CD and then boot from the CD, or you can download the auto-installer for the USB key. What this will do is format your USB drive, make it a bootable device, and then install the necessary files. Both do the same job, it's just up to you which you choose, or which you have available (whether it's CD or USB).

How Memtest works:

Memtest86 writes a series of test patterns to most memory addresses, reads back the data written, and compares it for errors.

The default pass does 9 different tests, varying in access patterns and test data. A tenth test, bit fade, is selectable from the menu. It writes all memory with zeroes, then sleeps for 90 minutes before checking to see if bits have changed (perhaps because of refresh problems). This is repeated with all ones for a total time of 3 hours per pass.

Many chipsets can report RAM speeds and timings via SPD (Serial Presence Detect) or EPP (Enhanced Performance Profiles), and some even support changing the expected memory speed. If the expected memory speed is overclocked, Memtest86 can test that memory performance is error-free with these faster settings.

Some hardware is able to report the "PAT status" (PAT: enabled or PAT: disabled). This is a reference to Intel Performance acceleration technology; there may be BIOS settings which affect this aspect of memory timing.

This information, if available to the program, can be displayed via a menu option.

Any other questions, they can most likely be answered by reading this great guide here:

http://forum.canardpc.com/threads/28864-FAQ-please-read-before-posting





Regards,

Patrick

http://www.techsupportforum.com/forums/f299/random-bsods-702345.html
Relevancy 46.87%

Hi all. I have been having issues with bsod's for a month or two now, which is quite frustrating.

I was having them every hour or so at one stage, however i debugged some issues, such as outdated drivers etc, and it isn't quite as frequent now.
It now occurs 1-3 times a day on average during heavy usage i guess.

I have attached the log file as requested in the guidelines.

Let me know if anyone can see anything that needs fixing, or if you need further info etc. thanks in advance.

A:Random BSODs

Another one overnight while i was sleeping, seemingly caused by msfs.SYS (Mailslot driver).

A bit more info. I have done a chkdsk on the ssd, and also have done ram test with around 4 passes now, without finding anything.

The video card driver has been high on the "suspects list" as the GEOforce drivers seem to cause a lot of issues.
any thoughts?

http://www.eightforums.com/bsod-crashes-debugging/38073-random-bsods.html
Relevancy 46.87%

Ive recently built this pc and I keep getting random bsods! ive tested the ram and hDDs and both check out fine. ive uninstalled and reinstalled all drivers but nothing sofar heres the latest info

Additional information about the problem:
BCCode: 50
BCP1: FFFFFFFFFFFFFFCB
BCP2: 0000000000000001
BCP3: FFFFF880050262C8
BCP4: 0000000000000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

I dunno what to do?!

A:random bsods help!!

Welcome

Follow these directions and post your dump reports
http://www.sevenforums.com/crashes-d...tructions.html

http://www.sevenforums.com/bsod-help-support/108046-random-bsods-help.html
Relevancy 46.87%

Hi folks,

Looking for some guidance as I'm on the verge of throwing my rig out the window! Getting completely random BSODs from doing nothing, to gaming and browsing the web.

The rig is only a few days old and I assembled it myself - I had the same issues with Windows 8.1 and then carried out a fresh install with W7.

Specs below

IntelCore i5 4570 Quad Core 3.2 GHz
Patriot Viper 3 8GB (2 x 4GB) DDR3-1600 Memory
Gigabyte GA-B85M-D2V Micro ATX LGA1150 Motherboard
Samsung 840 EVO 120GB 2.5" Solid State Disk
Seagate Barracuda 1TB 3.5" 7200RPM Internal Hard Drive
MSI GeForce GTX 770 2GB TWIN FROZR Video Card
XFX 550W 80+ Bronze Certified ATX Power Supply
Corsair 200R ATX Mid Tower Case
Samsung SH-224DB/BEBE DVD/CD Writer
TP-Link TL-WN881ND 802.11b/g/n PCI-Express x1 Wi-Fi Adapter


I've attached a couple of the latest crash dumps - they weren't saving before.

Any help is MUCH appreciated!

A:Random BSODs in W7

athrx.sys Tue Nov 23 19:11:58 2010

That's a Atheros network adapter driver but the motherboard is suppose to have a Realtek controller?

Follow the instructions here> http://www.techsupportforum.com/foru...ta-452654.html
Lets see if having all the info needed to analyze the dmps file(s) can tell us whats going on.



Code:




Debug session time: Sat May 24 08:44:07.798 2014 (UTC - 4:00)
Loading Dump File [C:\Users\Owner\Bsodapps\SysnativeBSODApps\052414-11793-01.dmp]
Built by: 7601.18409.amd64fre.win7sp1_gdr.140303-2144
System Uptime: 0 days 0:18:00.000
Probably caused by : memory_corruption
BugCheck 109, {a3a039d898c496f2, b3b7465eeb416648, fffff80002b9a490, 1}
BugCheck Info: CRITICAL_STRUCTURE_CORRUPTION (109)
Bugcheck code 00000109
Arguments:
Arg1: a3a039d898c496f2, Reserved
Arg2: b3b7465eeb416648, Reserved
Arg3: fffff80002b9a490, Failure type dependent information
Arg4: 0000000000000001, Type of corrupted region, can be
0 : A generic data region
1 : Modification of a function or .pdata
2 : A processor IDT
3 : A processor GDT
4 : Type 1 process list corruption
5 : Type 2 process list corruption
6 : Debug routine modification
7 : Critical MSR modification
BUGCHECK_STR: 0x109
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_MEMORY_CORRUPTION_ONE_BIT
MaxSpeed: 3200
CurrentSpeed: 3192
BiosVersion = F1
BiosReleaseDate = 08/26/2013
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = B85M-D2V
??????????????????????????????????????????????????????????????????????????????????????``
Debug session time: Sat May 24 08:25:51.116 2014 (UTC - 4:00)
Loading Dump File [C:\Users\Owner\Bsodapps\SysnativeBSODApps\052414-13416-01.dmp]
Built by: 7601.18409.amd64fre.win7sp1_gdr.140303-2144
System Uptime: 0 days 1:08:30.318
Probably caused by : ntkrnlmp.exe ( nt!RtlDeleteNoSplay+93 )
BugCheck 1000007E, {ffffffffc0000005, fffff80002a747a3, fffff880033474f8, fffff88003346d50}
BugCheck Info: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e)
Bugcheck code 1000007E
Arguments:
Arg1: ffffffffc0000005, The exception code that was not handled
Arg2: fffff80002a747a3, The address that the exception occurred at
Arg3: fffff880033474f8, Exception Record Address
Arg4: fffff88003346d50, Context Record Address
PROCESS_NAME: System
BUGCHECK_STR: 0x7E
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
FAILURE_BUCKET_ID: X64_0x7E_nt!RtlDeleteNoSplay+93
MaxSpeed: 3200
CurrentSpeed: 3192
BiosVersion = F1
BiosReleaseDate = 08/26/2013
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = B85M-D2V
??????????????????????????????????????????????????????????????????????????????????????``




*** 3rd PARTY DRIVER LIST ***
*** 3rd PARTY DRIVER LIST ***




AppleCharger.sys Mon Feb 18 23:17:09 2013 (5122FCC5)
NvStreamKms.sys Tue Apr 29 20:59:44 2014 (53604B00)
Rt64win7.sys Thu Oct 25 05:20:09 2012 (50890449)
TeeDriverx64.sys Thu Sep 5 14:02:18 2013 (5228C72A)
amdxata.sys Fri Mar 19 12:18:18 2010 (4BA3A3CA)
athrx.sys Tue Nov 23 19:11:58 2010 (4CEC584E)
avgdiska.sys Tue May 13 08:05:03 2014 (53720A6F)
avgfwd6a.sys Thu Sep 26 03:44:43 2013 (5243E5EB)
avgidsdrivera.sys Tue May 13 08:04:50 2014 (53720A62)
avgidsha.sys Tue May 13 08:05:36 2014 (53720A90)
avgldx64.sys Tue May 13 08:20:22 2014 (53720E06)
avgloga.sys Tue May 13 08:06:01 2014 (53720AA9)
avgmfx64.sys Tue May 13 08:05:03 2014 (53720A6F)
avgrkx64.sys Tue May 13 08:04:26 2014 (53720A4A)
avgtdia.sys Tue May 13 08:20:00 2014 (53720DF0)
igdkmd64.sys Wed Jan 22 17:42:16 2014 (52E04948)
intelppm.sys Mon Jul 13 19:19:25 2009 (4A5BC0FD)
iusb3hcs.sys Fri Mar 29 08:37:59 2013 (51558B27)
iusb3hub.sys Fri Mar 29 08:36:15 2013 (51558ABF)
iusb3xhc.sys Fri Mar 29 08:36:19 2013 (51558AC3)
nvhda64v.sys Thu Nov 28 08:38:09 2013 (5297474... Read more

http://www.techsupportforum.com/forums/f299/random-bsods-in-w7-841250.html
Relevancy 46.87%

Uggg - this one is driving me crazy. Originally the errors I got led me to believe it was a powersupply, nope. Then video card, it slowed them down. I have tested my ram with the MEMTEST86 (I think that is what it is called.) Here are the 6 most recent minidumps.

Anyway, the computer is Gateway DX4200-09
64 Bit Win 7 Home Premium
AMD 9750
8GB RAM
PowerSuppy is 500w OCZ ModStream
Video Card was GT-240, I removed while trouble shooting BSOD's, with no luck.

I get random BSODs and would love any help!

Thanks is Advance!

Relevancy 46.87%

Hi,

I have been experiencing random BSODs. I am attaching all my computer info with the minidump using your dm log collector tool. I am also sharing a url linking to a memory dump file (zip) i found in C:/Windows.
Kindly look into it and provide assistance if you can.
Thanks in advance.

Regards,
logically123

URL to Memory Dump Zip: https://www.dropbox.com/s/53yj1qol3d..._Dump.zip?dl=0

A:Random BSODs

Hiya and welcome to SevenForums!

Code:
BugCheck 4A, {76ef132a, 2, 0, fffff880089ddb60}

Probably caused by : ntkrnlmp.exe ( nt!KiSystemServiceExit+245 )
Run sfc /scannow and chkdsk /r.
Install the latest updates from Windows Update.

Do the exact same steps for chkdsk /r but instead of typing in sfc /scannow type chkdsk /r.

SFC /SCANNOW Command - System File Checker

http://www.sevenforums.com/bsod-help-support/376766-random-bsods.html
Relevancy 46.87%

I have done a ton of trouble shooting of what the problem may be. I thought I made a breakthrough when I thought the new NVIDIA drivers were bad and reverted back to old ones. They're still happening but not as frequent as it was. I hope you guys can shed some light on the problem. Thanks in advance.

A:Getting Random BSODs.

the dump indicates your BF4 game, see if it crashes when you use it and then when you don't.

http://www.sevenforums.com/bsod-help-support/376576-getting-random-bsods.html
Relevancy 46.87%

So I've been recently getting some BSODs, it appears at random times but mostly while playing League of Legends, while writting this thread I got BSODed again and it says that DXGKRNL has encountered a fatal error (im not 100% sure about it I only had a few seconds to write it down).
Attachment 365566
Thanks to everyone who helps

A:Random BSODs

The zip you uploaded is incomplete. Try SF Diag tool.

http://www.sevenforums.com/bsod-help-support/375260-random-bsods.html
Relevancy 46.87%

I have a Dell desk top that gets BSODs randomly. Every time I can catch the stop code, it is different. I have run malware, anti virus, etc programs on it and have also run a check on the hard drive and have found nothing. Nothing has been installed except for the Windows updates. Any ideas or suggestions??
 

A:Random BSODs and Not Sure Why

The stop codes have been 0x0a and 0x0c5.
 

https://forums.techguy.org/threads/random-bsods-and-not-sure-why.1116199/
Relevancy 46.87%

I've been having issues with bluescreens for a while now and they seem to be quite random so it's difficult for me to reproduce them. Some will occur when I'm playing a game, others will occur after I've gone to sleep and my computer is just idling. While I'm playing a game, my temps are within a normal limit. I'm pretty sure it's a driver problem but all of my drivers are up to date. If anyone could help with this, that would be great.

They've all got different error messages.
SYSTEM_SERVICE_EXCEPTION
DRIVER_IRQL_NOT_LESS_OR_EQUAL
IRQL_NOT_LESS_OR_EQUAL
KMODE_EXCEPTION_NOT_HANDLED

A:Random BSODs

Hello, Decibull and welcome to the Forums. I will try to help you. You have a lot of dump files and I checked the last 6. Most of the showed a general hardware error but doesn't list the piece of hardware which is normal.


Code:
se !analyze -v to get detailed debugging information.
BugCheck 124, {0, fffffa800c012028, bf800000, 124}
Probably caused by : GenuineIntel
Followup: MachineOwner
That is a generic hardware error meaning a component has failed/is failing or a very bad driver causing a piece of hardware to act as though it is failing.



Code:
Use !analyze -v to get detailed debugging information.
BugCheck 3B, {c0000005, fffff800030e0555, fffff8800d8a4d40, 0}
Probably caused by : hardware ( nt!KiDeferredReadyThread+82e )
Followup: MachineOwner
There was one or two which were more specific



Code:
Use !analyze -v to get detailed debugging information.
BugCheck D1, {fffffa900d69be88, 2, 1, fffff88004008cb2}
*** WARNING: Unable to verify timestamp for e22w7x64.sys
*** ERROR: Module load completed but symbols could not be loaded for e22w7x64.sys
Probably caused by : e22w7x64.sys ( e22w7x64+8cb2 )
Followup: MachineOwner
Which is your Killer e2200 PCI-E Gigabit Ethernet Controller. I suggest updating drivers from your Motherboard's web site for your specific board (MSI Global - The best gaming gears maker in the world). Killer networks has gone out of business, as far as I am aware and drivers are quite hard to find. Also, often times a vendor (MSI) alters drivers to work with their boards, so one from anywhere else won't work right.

The driver you currently have is


Code:
e22w7x64
start end module name
fffff880`04000000 fffff880`04027000 e22w7x64 T (no symbols)
Loaded symbol image file: e22w7x64.sys
Image path: \SystemRoot\system32\DRIVERS\e22w7x64.sys
Image name: e22w7x64.sys
Timestamp: Wed Mar 20 16:35:41 2013 (514A2BAD)
CheckSum: 00031967
ImageSize: 00027000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Also listed on 2 dumps was


Code:
fffff800`00b9a6e8 fffff880`04a13401Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
nvlddmkm+0x201401
Which is your Graphics card drivers. These are your current Drivers


Code:
nvlddmkm
start end module name
fffff880`04812000 fffff880`0524a000 nvlddmkm T (no symbols)
Loaded symbol image file: nvlddmkm.sys
Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
Image name: nvlddmkm.sys
Timestamp: Wed Apr 08 15:32:37 2015 (55259065)
CheckSum: 009F7AE7
ImageSize: 00A38000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
There were also references to your hard drive having errors. Please use the Samsung Toolbox and make certain your Firmware is up to date and the health of your SSD is OK. If you have any Mechanical drives please run Seatools for DOS

After updating your Network driver please reinstall/Update your Nvidia driver following this guide
NVIDIA Drivers - Avoid Problems

If you are overclocking anything, please set everything to default values. Overclocking while the computer is not stable is useless and will make finding the cause difficult, if not impossible.

Let us know how things are going after you finish with the above.

http://www.sevenforums.com/bsod-help-support/369281-random-bsods.html
Relevancy 46.87%

Hi all I'm writing here because of a problem with my pc random BSODs occurring more often since the last couple of months I've attached the dump files and the report as BSODs Random requested in the instructions here are the details of the last one Quote problem signature event name BlueScreen PS Random BSODs version ID local settings more info BCCode b BCP FFFFFA D B BCP FFFFFA B BCP BCP OS Version Service Pack Product This is Random BSODs a screen I've captured IMG http i com ef b e jpg IMG My PC details - Windows Ultimate x Full retail not the original installed OS on the system - Hardware age or years have to check bills - OS installation age less than year Hardware spec - CPU Intel core duo e - Motherboarb asus p q deluxe - ram Corsair Dominator x C D - vga xfxgeforce black edition - hdd samsung TB rpm sata-II - psu enermax W all temperatures were ok when blue screens occurred I use Everest to monitor the system A similar problem happens also when using certain games the pc freezes screen and sound snookered so I have to manually reboot when rebooting I get a beep error code long and short as guides online and the manual of the mainboard says it should be an error in the system memory though I've tried more than once testing with memtest and other stress tests for the gpu and cpu I didn't find anything wrong this happens with Crysis Call of juarez the Cartel and others also here all temps memory usage etc were normal I hope to find a solution here with your help this is kinda an annoying trouble as you can guess thanks in advance danyy

A:Random BSODs

Hi.

Update or uninstall Acronis True Image Snapshot Manager driver
also included in Seagate DiscWizard

Backup software for data backup and disaster recovery in Windows and Linux - Acronis
Update Asus ATK0110 ACPI Utility (a known BSOD maker in Win7). Also a part of the Asus PCProbe and AISuite Utilities

ASUSTeK Computer Inc. -Support- Drivers and Download
Update Asus PCProbe Utility
ASUSTeK Computer Inc. -Support- Drivers and Download
Finish with the above steps and post back.

http://www.sevenforums.com/bsod-help-support/196811-random-bsods.html
Relevancy 46.87%

I have been getting seemingly random BSODs and deep freezes lately. They are not totally random, i.e. they happen after starting or exiting programs, but not always. Only sometimes. I might run a program and get a deep freeze, and then upon reboot, running the same program again does nothing. Can anyone tell me what is going on? Thanks. Following is my minidump.
 

A:Random BSODs

Your minidump crashes at ntkrnlpa.exe and references verclsid.exe as the owning process.

The verclsid.exe file is known to cause problems and could be the cause of your problems too.

See HERE and HERE for more info.

Obviously, it`s difficult to be sure from just one minidump, but it is a known issue and therefore is worthy of further investigation.

Regards Howard
 

http://www.techspot.com/community/topics/random-bsods.66024/
Relevancy 46.87%

Hi all I apologize for the very generic title however these really have been random with no discernible cause PC Details MSI GT ND Laptop i QM GB RAM it's speced with GB I added another Random BSODs GB nVidia GTX M GB SSD x GB in RAID GB HDD Running wonderfully for about Random BSODs months last week or so I've had BSODs BSOD Details Like I said they are random the only consistent one I can reproduce is after the laptop has been turned off or put in sleep mode for at least half an hour When I boot up it gets past the BIOS shows the beginning of the Random BSODs Windows animation then immediately BSODs This happens between one and times even booting into Safe Mode or Recovery causes this and then it boots normally This got me thinking it might be something fan or heat detection related as obviously the laptop is still cold when this happens the one experiment I tried was 'cold' booting going directly into the BIOS waiting minutes then rebooting and there were no BSODs during boot up probably dumb luck but mentioning it here regardless Other times it seems completely random playing Wow GW doing work in NetBeans Office etc even just idling What I've done so far with no success - Removed the extra RAM - Ran Memtest with and without the extra RAM no errors - Uninstalled VGA Network Soundcard drivers - Updated all drivers Random BSODs available on MSI's website - Updated the VGA drivers from nVidia's website this was after trying the latest from MSI's website - Updated the laptop firmware and BIOS from MSI's website - Done a power cycle on the laptop left battery out for an hour - Recalibrated the battery via a tool from MSI I also downloaded WinDbg and had a look at some of the dump files but I simply don't have the expertise to determine what they are saying Reinstalling Windows is my next step but having discovered this site and the number of successful solves here I thought I'd try my luck here first Thanks in advance for any help Supes

A:Random BSODs

Welcome aboard.

► nVidia Dispaly Driver .... the latest one is problematic.

Code:
lmvm nvlddmkm
start end module name
fffff880`0f4f0000 fffff880`101e4000 nvlddmkm T (no symbols)
Loaded symbol image file: nvlddmkm.sys
Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
Image name: nvlddmkm.sys
Timestamp: Tue Oct 02 23:51:13 2012 (506B3099)
CheckSum: 00CD4613
ImageSize: 00CF4000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Download and install Driver Fusion.
Reboot the computer in Advanced Boot Options, safe mode. Search Driver Fusion in your start menu, and remove all components of your nVidia display driver.
Boot normally now. Go to Drivers - Download NVIDIA Drivers, Drivers > Beta and Legacy; search there with your cards particulars for GeForce 306.23 Driver, dated 13.9.2012 and install it.
► Intel Rapid Storage Technology. As it is crashing, get rig of it.
Right click on the My Computer icon> Select manage. It will open the computer management window.
Click on the "Device manager" in the left pane.
Expand Disc Drives, by clicking the triangle in front of it..
Select. Right click > Uninstall them all, one by one.
When Done, restart the computer.
On restart, default msahci.sys driver will be auto configured. .
► Take care of your Storage devices.
Update your SSD's Firmware
Reseat the sata and power.
Run chkdsk /f/r, following the option two of the tutorial Disk Check
Seatool for dos: SeaTools | Seagate download
Burn it in a blank cd. boot from the CD, click on "Accept", wait for it to finish detecting the drives, then in the upper left corner select "Basic Tests", then select "Long Test" and let it run.
► Uninstall the following programs:
Start Menu\Programs\MSI
Start Menu\Programs\MSI\Battery Calibration
Start Menu\Programs\MSI\BurnRecovery
Start Menu\Programs\MSI\MSI Software Install
► Free up the startup.
Click on the Start button
Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the “Startup” tab.
Deselect all items other than the antivirus.
Apply > OK
Accept the restart.
Let us know the results.

http://www.sevenforums.com/bsod-help-support/262170-random-bsods.html
Relevancy 46.87%

Hello guys im having bsods since i bought this pc. I tried formatting and many other solutions that some people tell me and it didnt work. It is caused by many things such as : ntoskrnl.exe, dxgmms1.sys, nwifi.sys, tcpip.sys, arthurx.sys, win32k.sys and many more others. I uploaded some of the dump files but cant upload all of them because it exceeds upload limit. If you want me to upload anything else please tell me. Any help will be appreciated thanks.
 

A:Random BSODs everywhere

I only looked at 2, but you need to update to BIOS Version 2.00.02 given that you have a 4th gen cpu.
Based on the last dump you have the stock BIOS (0309)
http://www.asus.com/us/Motherboards/B85PLUS/HelpDesk_Download/
 

https://forums.techguy.org/threads/random-bsods-everywhere.1142485/
Relevancy 46.87%

Hi there For about Random BSODs a month now I have been experiencing random BSODs I have tried to find something constant Random BSODs about when they happen but to no avail It sometimes happens after my computer has been on for days with no problems - sometimes only after an hour The message of the BSOD is quite different from a time to another though the most common are BAD POOL HEADER and BAD POOL CALLER I also once had MEMORY MANAGEMENT and a few times NO MORE IRP STACKS After doing some research everything lead to think my RAM was faulty so I ran memtest on each of my RAM sticks on its own but no error was found The other possible cause I could find was a driver problem so I updated the drivers I could think of - video card sound card a few USB devices still didn't help Now I am rather clueless I am thinking maybe one of my HDs has a problem or maybe my power supply or CPU or It is important to mention that some other side-problems have also been affecting me For a period of time maybe weeks booting windows would take like minutes Then once my USB ports stopped working in mode though they used to and shortly after my computer wouldn't boot at all remaining stuck at the first step before I could even access the BIOS So in a last hope attempt I opened my computer cleaned all the dust removed all devices and put them in again making sure everything was tight and clean I also changed the thermal paste in the CPU though it wasnt really dry tried again and magically it booted fast enough and the USB issue was solved First thing I did after getting in again was backup everything and update the BIOS Another side-problem which started maybe month before all the rest is that once in a while when rebooting after windows has loaded my screen starts showing everything with flashing lines making it impossible to read or use This is always solved by a new reboot and only happens about time out of This hinted me towards a video card problem but then again now I am quite puzzled I updated its driver and it didn't change anything and most of the time it seems to be working just fine for extended periods of time I guess all of this could be both software or hardware related and I'm having a really hard time to pinpoint where it could come from The only thing I can remember having changed before this started is adding a ports USB hub though I'm not sure it actually was before I tried disconnecting the hub and rebooting to see if it caused the problem but it still crashed with a BSOD so I guess that's not it I had to install no drivers to use the hub Here are my specs CPU Intel Pentium MHz x Motherboard Asus P LD -VM RAM MB DDR - DDR SDRAM Video Card All-in-Wonder X MB Monitor HP w Wide LCD Sound card Creative SB X-Fi Platinum Other PCI None HDs WDC WD JS- MVB GB IDE Maxtor L R SCSI GB RPM Ultra-ATA Drives Floppy drive LITE-ON DVDRW SHW- P S SONY DVD RW DRU- A Router Apple Airport Extreme though it is only linked to the computer through the Ethernet wire USB - WD EAVS External HD GB - M-Audio FastTrack USB - USRobotics USR - iPod not always connected BSDOs happen also when its not connected - Printer Canon MX - -ports USB hub which is part of my screen - Apple Mighty Mouse - The -ports hub which is now disconnected - other external HDs which however I have disconnected already week ago as I don't need them right now in case they might be the problem - Logitech Dual Action but I also disconnected it weeks ago Power supply is w I always thought it was quite low as is recommended for my X but I've had it for years with no problems before I am used to google my computer problems and solve them myself but I have been trying to fix this for weeks now and I'm getting nowhere Thanks in advance to anyone who reads and tries helping

http://www.techsupportforum.com/forums/f10/random-bsods-344137.html
Relevancy 46.87%

Hello,

I am having an issue with my computer.

A:Random BSODs

Blue Screen of Death (BSOD) Posting Instructions

http://www.sevenforums.com/bsod-help-support/368037-random-bsods.html
Relevancy 46.87%

They don't happen very often. I think it's my GPU driver.

Intel Pentium E5500
ATI 5670
2GB RAM
Windows 7 Ultimate 32bit

A:Random BSODs

  
Quote: Originally Posted by R00N


They don't happen very often. I think it's my GPU driver.

Intel Pentium E5500
ATI 5670
2GB RAM
Windows 7 Ultimate 32bit



"It's not a true crash, in the sense that the bluescreen was initiated only because the combination of video driver and video hardware was being unresponsive, and not because of any synchronous processing exception".

Since Vista, the "Timeout Detection and Recovery" (TDR) components of the OS video subsystem have been capable of doing some truly impressive things to try to recover from issues which would have caused earlier OSs like XP to crash.

As a last resort, the TDR subsystem sends the video driver a "please restart yourself now!" command and waits a few seconds.

If there's no response, the OS concludes that the video driver/hardware combo has truly collapsed in a heap, and it fires off that stop 0x116 BSOD.

If playing with video driver versions hasn't helped, make sure the box is not overheating.

Try removing a side panel and aiming a big mains fan straight at the motherboard and GPU.

Run it like that for a few hours or days - long enough to ascertain whether cooler temperatures make a difference.

If so, it might be as simple as dust buildup and subsequently inadequate cooling.

I would download cpu-z and gpu-z (both free) and keep an eye on the video temps Let us know if you need help STOP 0x116: VIDEO_TDR_ERROR troubleshooting

http://www.sevenforums.com/bsod-help-support/195579-random-bsods.html
Relevancy 46.87%

Hello, first of all, this is my system:
MOBO Gigabyte M3.
Intel i5 2310,
Gigabyte GTX 650 Ti Boost.
4 GB of RAM 1333, Kingston.
PSU Corsair TX550M.
Ok, to the issue. Since today, I have been having random BSOD, here are the screenshots of it:

imgur: the simple image sharer

The first image happened on safe mode, the second one in normal mode after starting windows. For a strange reason, they didnt generate any minidump files. There is only one which is 0kb and literally shows nothing at minidump file viewer software.

Would appreciate ANY help to localize the issue.

Thanks in advance!

Relevancy 46.87%

Hi Ever since yesterday I started to have randome BSoDs Not sure why if I haven't done any new updates or driver upgrades At first BSoDs random I thought it was related to random BSoDs when i started to play Company of Heroes but uninstall reinstall didn't help Then I realize it may be due to a trainer I tried to use which was detected as a trojan by mcafee though i've run virusscan spybot malwarebytes stinger and cleaned out some files But still some random BSoDs random BSoDs continue Attached is my hijackthis and the windows minidump files I've also updated my video audio wireless and lan adapters still made no difference I greatly appreciate the help Code contents of hijackthis file Logfile of Trend Micro HijackThis v Scan saved at PM on Platform Windows WinNT MSIE Internet random BSoDs Explorer v Boot mode Safe mode with network support Running processes C Program Files x HiJackThis Trend Micro HiJackThis HiJackThis exe R - HKCU Software Microsoft Internet Explorer Main Default Page URL http wwwin cisco com R - HKCU Software Microsoft Internet Explorer Main Search Page Bing R - HKLM Software Microsoft Internet Explorer Main Default Page URL MSN com R - HKLM Software Microsoft Internet Explorer Main Default Search URL Bing R - HKLM Software Microsoft Internet Explorer Main Search Page Bing R - HKLM Software Microsoft Internet Explorer Main Start Page MSN com R - HKLM Software Microsoft Internet Explorer Search SearchAssistant R - HKLM Software Microsoft Internet Explorer Search CustomizeSearch R - HKLM Software Microsoft Internet Explorer Main Local Page C Windows SysWOW blank htm R - HKCU Software Microsoft Internet Explorer Main Window Title Windows Internet Explorer provided by Cisco R - HKCU Software Microsoft Internet Explorer Toolbar LinksFolderName R - URLSearchHook no name - bf fa-e b - db -af e- d a bfc - no file F - REG system ini UserInit userinit exe O - BHO AcroIEHelperStub - DF C-E AD- -A -FA C EBDC - C Program Files x Common Files Adobe Acrobat ActiveX AcroIEHelperShim dll O - BHO Spybot-S amp D IE Protection - - F - D - - D F - C PROGRA SPYBOT SDHelper dll O - BHO Windows Live ID Sign-in Helper - D - C - ABF- ECC- C - C Program Files x Common Files Microsoft Shared Windows Live WindowsLiveLogin dll O - BHO WebEx Productivity Tools - E BA E-DD B- cde- - A B D CA - C Program Files x WebEx Productivity Tools ptonecli dll O - BHO Java tm Plug-In SSV Helper - DBC -A - b-BC - C C C A - C Program Files x Java jre bin jp ssv dll O - Toolbar WebEx Productivity Tools - E BA E-DD B- cde- - A B D CA - C Program Files x WebEx Productivity Tools ptonecli dll O - HKLM Run AeXAgentLogon C Program Files x Altiris Altiris Agent AeXAgentActivate exe logon O - HKLM Run ShStatEXE quot C Program Files x McAfee VirusScan Enterprise SHSTAT EXE quot STANDALONE O - HKLM Run SoftGridTray quot C Program Files x Microsoft Application Virtualization Client SFTTray exe quot autostart O - HKLM Run PWMTRV rundll C PROGRA ThinkPad UTILIT PWMTR V DLL PwrMgrBkGndMonitor O - HKLM Run AgentUiRunKey quot C Program Files x Iron Mountain Connected BackupPC Agent exe quot -ni -sss -e http localhost O - HKLM Run McAfeeUpdaterUI quot C Program Files x McAfee Common Framework UdaterUI exe quot StartedFromRunKey O - HKLM Run RotateImage C Program Files x Integrated Camera Driver X RCIMGDIR exe O - HKCU Run SpybotSD TeaTimer C Program Files x Spybot - Search amp Destroy TeaTimer exe O - HKUS S- - - Run Sidebar ProgramFiles Windows Sidebar Sidebar exe autoRun User 'LOCAL SERVICE' O - HKUS S- - - RunOnce mctadmin C Windows System mctadmin exe User 'LOCAL SERVICE' O - HKUS S- - - Run Sidebar ProgramFiles Windows Sidebar Sidebar exe autoRun User 'NETWORK SERVICE' O - HKUS S- - - RunOnce mctadmin C Windows System mctadmin exe User 'NETWORK SERVICE' O - HKUS S- - - Run sjchxbin C Windows TEMP awfalfiil ybdoqmusjmo exe User 'SYSTEM' O - HKUS DEFAULT Run sjchxbin C Windows TEMP awfalfiil ybdoqmusjmo exe User 'Default user' O - Extra context menu item E amp xport... Read more

http://www.techsupportforum.com/forums/f217/random-bsods-546640.html
Relevancy 46.87%

Hey guys I don't know if it was a good idea to continue this thread but I have a similar issue I'm getting BSODs since I have the laptop randomly with random errorcodes I don't have any antivirus installed i have all the latest updates on audio and video I have some minidumps attached but I Random BSODs couldn't post the old ones as I lost them due to win reinstall They were mostly related to the Nvidia driver quot nvlddmkm sys quot I already posted them on other forum but they couldn't find the cure for the problem I had some older video driver initially and I got the BSODs while playing but quite rarely it's not caused by overheat or dust I'm sure I have Random BSODs been testing RAM with memtest and VRAM with OCCT no problems found As I enabled the driver verifier as Reventon suggested I couldn't even start windows I was getting BSODs when the win was about to start Then went to safe mode and reset the verifier so that only nvlddmkm sys was tested it crashed again So i'm almost sure the problem is with that Any suggestion I have G JX aswell on win x Thanks a lot guys

A:Random BSODs

Welcome!

It does appear to be graphics related. Do you have another video card you can try? Perhaps borrow one from a friend, or another computer.

Also, try a video card stress test. See this tutorial: Video Card - Stress Test with Furmark

Be sure to report the temperature it reaches.

...Summary of the Dumps:
Code:

Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Thu Jul 29 09:48:56.648 2010 (UTC - 4:00)
System Uptime: 1 days 23:04:30.225
BugCheck 116, {fffffa8003d1e4e0, fffff88010184cf8, 0, 2}
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+119cf8 )
BUGCHECK_STR: 0x116
PROCESS_NAME: System
??????????????????????????????????????????????????????????????????????????????????????
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Mon Jul 19 16:08:42.807 2010 (UTC - 4:00)
System Uptime: 2 days 8:54:58.456
BugCheck 116, {fffffa80071fa4e0, fffff88004ae5110, 0, 2}
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+15110 )
BUGCHECK_STR: 0x116
PROCESS_NAME: System
??????????????????????????????????????????????????????????????????????????????????????
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Mon Aug 9 07:49:02.298 2010 (UTC - 4:00)
System Uptime: 0 days 0:00:09.952
BugCheck D1, {fffff880044ae4e4, 2, 8, fffff880044ae4e4}
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : dxgkrnl.sys ( dxgkrnl!DpiAddDevice+0 )
DEFAULT_BUCKET_ID: VERIFIER_ENABLED_VISTA_MINIDUMP
BUGCHECK_STR: 0xD1
PROCESS_NAME: System
??????????????????????????????????????????????????????????????????????????????????????
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Fri Aug 6 18:17:22.291 2010 (UTC - 4:00)
System Uptime: 0 days 4:03:42.539
BugCheck 19, {3, fffffa800b2b6680, 0, fffffa800b2b6680}
*** WARNING: Unable to verify timestamp for iaStor.sys
*** ERROR: Module load completed but symbols could not be loaded for iaStor.sys
Probably caused by : Pool_Corruption ( nt!ExFreePool+780 )
BUGCHECK_STR: 0x19_3
PROCESS_NAME: System
??????????????????????????????????????????????????????????????????????????????????????
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Fri Jul 30 08:28:03.119 2010 (UTC - 4:00)
System Uptime: 0 days 22:38:39.490
BugCheck 50, {fffff860031f86bc, 1, fffff800031b22c2, 5}
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+1969b9 )
BUGCHECK_STR: 0x50
PROCESS_NAME: SC2.exe
??????????????????????????????????????????????????????????????????????????????????????

For future reference, it is best to create a new thread, rather than posting in another. I have asked the mods to move this to a separate one.

http://www.sevenforums.com/bsod-help-support/103017-random-bsods.html
Relevancy 46.87%

Hello all after months of getting crazy over my PC problems I finally found this forum and reading a bit gave me new hopes of solving them BSODs on Random PC new a I built a new PC months ago and since then I get random BSODs there is no correlation between them I get them while working gaming or even when I am not at the PC at all I already tried switchign around ram sticks got gig in sticks so that was easy to do and I doubt all ram sticks are faulty and still got the BSODs in every config I switched harddrives switched my satellite receiver card Random BSODs on a new PC to an external USB box turned off USB in BIOS turned off every non-essential on board stuff in BIOS set all performance settings in BIOS to slow settings turned down RAM settings uninstalled lots of software updated Random BSODs on a new PC drivers exchanged the on-board soundcard with a creative X-FI installed a water-cooling set to keep the CPU and graphic card even cooler they weren t running unusually hot before but I did it just in case and cause I ran out of ideas I reinstalled windows bought a new high-end Powersupply nothing helped in any way still got the BSODs sometime after days of stable uptime I am absolutely out of ideas except CPU Board and graphic card I exchanged pretty much everything I attached minidumps a few recent ones and a few older ones Since I have no idea how to read them I can only hope one of you guys out there can help me and safe my sanity haha Thanks in advance Faile nbsp

A:Random BSODs on a new PC

if one of your memory sticks is faulty then simply switching them around isnt going to solve the problem. have you tried running with 1 gb of ram instead of 2 gb? that may or may not be the problem since your problem is sporadic. which could mean a faulty mobo component(s). check the capcitors on your mobo for swelling or leakage.
 

http://www.techspot.com/community/topics/random-bsods-on-a-new-pc.34884/
Relevancy 46.87%

I've been getting a lot of BSODs lately, sometimes 5-10 in one day, and often I come back to the computer after it is left alone for a while to find it is either sitting at the blue screen or is asleep but won't wake up. This is after years of the computer working fine (e.g. at one point it went 18 months without a single BSOD).

Every single time it crashes it gives the IRQL_NOT_LESS_OR_EQUAL then also this:

*** STOP: 0x0000000A (0x08000447, 0x00000002, 0x00000000, 0x804D9B64)

Attached are a number of recent minidumps.

Any help greatly appreciated.
 

A:Random BSODs several each day

Gateway M275 laptop (1.7Ghz, 1GB RAM) running Windows XP SP2
Click to expand...

Why hasn't that Gateway M275 laptop been upgraded to SP3 - which was released over 4 years ago?

------------------------------------------------------
 

https://forums.techguy.org/threads/random-bsods-several-each-day.1063604/
Relevancy 46.87%

I have been getting random BSODs for the past few days. I used BlueScreen reader and the only thing I can decipher is ntoskrnl.exe driver is the culprit. I've attached the reports listed on your forum. Any help will be appreciated.

Thanks in advance

Hamlet

A:Random BSODs with

Hi Welcome to TSF
yes you are right they are all pointing to ntkrnlmp.exe

There is not lot of information that i can gather other than a few applications that are causing it but not frequently to say that those applications are at fault

Looking through your system settings we are going to start with this plan and follow

1) Cleanboot your machine ,..do not have tons of things loading up and running when you are not even using them
Perform a clean startup to determine whether background programs are interfering with your game or program

2) One you are done with above and rebooted...please run windows update and make sure you have all the mandatory updates installed

3) Uninstall following programs just for time being
Youtube downloader
Ubuntu one
Dropbox

Run Driver Verifier for couple of days and see if it turns up anything
if you get a BSOD while running Driver verifier go ahead and post the dump files here
http://www.techsupportforum.com/foru...ed-473665.html

http://www.techsupportforum.com/forums/f299/random-bsods-with-648442.html
Relevancy 46.87%

I keep getting random BSODs random times random messages including page faults on what is now a BSODs Random second complete rebuild of a system after RMAing the RAM then CPU and motherboard for different items Windows crash consistently says device driver I m now using AMD Athlon rev E ASUS A V Antec Trueblue W V A V A Random BSODs V A - V A - V A VSB A GB x mb Kingston KVR X C AK G Generic quot Beige -in- Card ATI All-in-Wonder Radeon MB AGP x Western Digital Caviar Special Edition GB WD JB- CRA PATA harddrive at IDE ch Random BSODs Maxtor GB B M SATA harddrive at IDE ch system and boot drive using SATA RAID drivers Random BSODs Norcent CD-R RW x drive at IDE ch slave Matshuita DVD-RAM LF-D drive at IDE ch master Generic floppy disk drive Microsoft optical mouse and keyboard Windows XP Pro SP Memtest produces no errors with this RAM on this system and on this system with an MSI K N -Delta -LSR with Athlon XP the previous system My best guess is the video card given problems with ATI and this ASUS board and the fact that it the video card is the oldest component in the system I ve tried using the newest driver and the first driver with CATALYST but neither seems to affect the BSOD issue Minidumps are attached which I can t make heads or tails of Can anyone help nbsp

A:Random BSODs

still scratching my head

I've played around with different versions of the driver for the video card since putting up the original post, but nothing seems to stop the BSODs. I'm ready to get a new video card to verify that that's the problem, but I'd really like some assurance that it's not something else...


Can anyone make sense of the minidumps (it's Greek to me!)?
Any suggestions...anyone?
 

http://www.techspot.com/community/topics/random-bsods.40002/
Relevancy 46.87%

I work for a municipality in the IT department and deal with computers all day long one computer that I have been dealing with keeps getting random BSODs caused by different drivers I used BlueScreenView to capture them and figure out what they are caused by but they seem to be all different system files One BSODs..HELP! Random of them caused by atapi sys was fixed it was a bad CD drive It also did a BSOD Random BSODs..HELP! when Sophos was installed on it we use this anti-virus software throughout the network and this seems to be the only computer that doesn t like it So I switched it out with Microsoft Security Essentials just to keep it protected All of these other ones I can t figure out after google searching all of them since I get vague answers from different sources including here Hoping to get some answers from here Any help will be greatly appreciated Description Dell Optiplex SFF Intel Pentium D GHz CPU GB RAM Windows XP Pro SP As far as I know this computer only has MS Office MSE and a Phone System Console software for transferring calls Also I ran chkdsk according to another forum I read to try to fix the hal dll and ntfs sys It fixed until the next BSODs came along I ve pretty much given up and I don t want to have to re-install Windows Here are all of the crashes Dump File Mini - dmp Crash Time PM Bug Check String IRQL NOT LESS OR EQUAL Bug Check Code x a Parameter x a Parameter x c Parameter x Parameter x fb Caused By Driver hal dll Caused By Address hal dll b File Description Hardware Abstraction Layer DLL Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version xpsp - Processor -bit Crash Address ntoskrnl exe Stack Address hal dll b Stack Address ntoskrnl exe d Stack Address ntoskrnl exe d a Computer Name Full Path C WINDOWS MiniDump Mini - dmp Processors Count Major Version Minor Version Dump File Size Dump File Mini - dmp Crash Time AM Bug Check String DRIVER IRQL NOT LESS OR EQUAL Bug Check Code x d Parameter x a Parameter x Parameter x Parameter xb e Caused By Driver USBPORT SYS Caused By Address USBPORT SYS File Description USB amp Port Driver Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version xpsp - Processor -bit Crash Address USBPORT SYS Stack Address USBPORT SYS d Stack Address USBPORT SYS b b Stack Address USBPORT SYS b c Computer Name Full Path C WINDOWS MiniDump Mini - dmp Processors Count Major Version Minor Version Dump File Size Dump File Mini - dmp Crash Time AM Bug Check String IRQL NOT LESS OR EQUAL Bug Check Code x a Parameter x Parameter x c Parameter x Parameter x b Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe b File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version xpsp sp gdr - Processor -bit Crash Address ntoskrnl exe b Stack Address ntoskrnl exe e a Stack Address ntoskrnl exe a cc Stack Address Computer Name Full Path C WINDOWS MiniDump Mini - dmp Processors Count Major Version Minor Version Dump File Size Dump File Mini - dmp Crash Time PM Bug Check String PAGE FAULT IN NONPAGED AREA Bug Check Code x Parameter xf e cf Parameter x Parameter xbf Parameter x Caused By Driver win k sys Caused By Address win k sys File Description Multi-User Win Driver Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version xpsp sp gdr - Processor -bit Crash Address win k sys Stack Address win k sys b b Stack Address win k sys Stack Address ntoskrnl exe a cc Computer Name Full Path C WINDOWS MiniDump Mini - dmp Processors Count Major Version Minor Version Dump File Size Dump File Mini - dmp Crash Time PM Bug Check String KERNEL MODE EXCEPTION NOT HANDLED Bug Check Code x e Parameter xc Parameter x ad Parameter xa f Parameter x Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe d File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Ve... Read more

A:Random BSODs..HELP!

Bug Check String : IRQL_NOT_LESS_OR_EQUAL can be a driver issue or bad hardware e.g ram.

Bug Check String : PAGE_FAULT_IN_NONPAGED_AREA can be linked to bad memory It can also mean that invalid system memory has been referenced.
Which can be from a software driver bug.

So those would be the first things i checked, when i had the page fault error it was linked to a recent ms update, so check the first date tht error appeared and see what you installed, would most likely be a platform update.

I would also download whocrashed it is like the program you use but gives more information on the root causes.
 

https://forums.techguy.org/threads/random-bsods-help.1095080/
Relevancy 46.87%

Hi just looking for help on what s going wrong with my laptop Description of what s happening I ve had BSODs before on this machine then the hard drive conked out about a year ago different BSODs Random due to different problems Got a new one installed and now it seems to be encountering a similar problem as before It ranges from different BSOD Some stay on the screen others do not Random different BSODs I ve had Random different BSODs about so far in about a week They typically happen when I m using chrome however this isn t always the case The first one was on Tuesday it happened restarted the laptop happened again almost instantly again restarted and it happened again I left it for a bit came back to it ran malware bytes and eset nod virus scanner picked up a few things but cleaned all of them Seemed okay and then happened on the Thursday restarted and it seemed fine until today where it Random different BSODs encountered another BSOD Specs of the laptop HP Compaq NC - Intel Core CPU T Ghz GB of DDR Ram Intel integrated graphics GB Sata hard drive If anyone can help it d be much appreciated nbsp

Relevancy 46.87%

I recently (less than a week ago) started getting blue screens that i can't seem to pinpoint the source for.

They usually occur during gaming sessions but have also occurred at the login screen for windows.

i have tried tons of things such as
1.uninstalling and reinstalling video drivers.
2.Uninstalling video drivers and the video card itself
3.reinstalling windows
4.Testing each memory module individually
5.updating the bios

And after each change i made i allowed my system to run until it crashed again.
But still i get random BSODS


Windows 7 32-bit is the only OS i have been using with this PC
At this point it is a fresh reinstall from a back up disk
My hardware is from 6 months to 2 years old since i built it myself and upgrade from time to time

amd athlon II x4 640 3.0ghz
Powercolor HD 4850 512mb
ASUS M4A785-M mobo
Ultra LSP lifetime series PSU 650 watts

A:Random BSODs

Hard to tell from such a small sample of DMPS. You cant spot trends and recent developments.

Your most recent crash was a video time out and recover, but the two prior ones were memory related.

I would address the video issue first and see if the other disappear. If you are overclocking stop

Quote:




"It's not a true crash, in the sense that the bluescreen was initiated only because the combination of video driver and video hardware was being unresponsive, and not because of any synchronous processing exception".

Since Vista, the "Timeout Detection and Recovery" (TDR) components of the OS video subsystem have been capable of doing some truly impressive things to try to recover from issues which would have caused earlier OS's like XP to crash.

As a last resort, the TDR subsystem sends the video driver a "please restart yourself now!" command and waits a few seconds.

If there's no response, the OS concludes that the video driver/hardware combo has truly collapsed in a heap, and it fires off that stop 0x116 BSOD.

If playing with video driver versions hasn't helped, make sure the box is not overheating.

Try removing a side panel and aiming a big mains fan straight at the motherboard and GPU.

Run it like that for a few hours or days - long enough to ascertain whether cooler temperatures make a difference.

If so, it might be as simple as dust buildup and subsequently inadequate cooling.

I would download cpu-z and gpu-z (both free) and keep an eye on the video temps





I would also::

Remove and replace avg with MSE
I note you have AVG.
AVG can be a contributing cause of BSOD'S .
Please remove and replace with Microsoft Security Essentials
http://www.avg.com/ww-en/utilities"] Download tools and utilities | AVG Worldwide
http://www.microsoft.com/security_essentials/"] Microsoft Security Essentials - Free Antivirus for Windows
AND

Please run the System Update Readiness Tool (SURT) and then update to SP-1
32 Bit

Download: System Update Readiness Tool for Windows 7 (KB947821) [May 2012] - Microsoft Download Center - Download Details

64 Bit

Download: System Update Readiness Tool for Windows 7 for x64-based Systems (KB947821) [May 2012] - Microsoft Download Center - Download Details
Now update to SP-1

Learn how to install Windows 7 Service Pack 1 (SP1)
This is the latest build number of Windows 7:

6.1.7601.17514

Learn how to install Windows 7 Service Pack 1 (SP1)
Learn how to install Windows 7 Service Pack 1 (SP1)

Additional Resources:

How to uninstall Windows 7 Service Pack 1 (SP1)
Troubleshoot problems installing Service Pack 1 (SP1) for Windows 7 and Windows Server 2008 R2

http://www.techsupportforum.com/forums/f299/random-bsods-655292.html
Relevancy 46.87%

hi,

for the last few weeks i have been plague with bsod seemly random, not sure what the problem is. I have tried just about everything, I was thinking it was a problem with the memory. I just reinstalled(today) hoping that would fix the problem but already have had 2 crashes. i'm thinking it a problem with ethier the motherboard or memory so kinda of hopeing someone can point me the right way so i know who to talk 2 should it be a hardware problem.

i will post any other dumps should more crashes happen.

Also should more info be needed please just ask

Thanks for your time

A:Random Bsods

Hi.

It's memory corruption.

So, uninstall your antivirus and firewall apps to test. Don't just disable because that will be of no use.

If still not good, run Memtest86+ overnight to test the RAM.

It's also good to make sure the Vdimm (RAM voltage), timings and frequency are set correct for your specific RAM. Use the spd tab of CPU-Z to check the correct model number. Then visit the RAM maker's site for info on it. Set the motherboard bios accordingly.

Further, these drivers are old and should either be updated to latest or uninstalled from the system:

CTAUDFX CTAUDFX.DLL Mon Apr 09 09:08:39 2007
CTSBLFX CTSBLFX.DLL Mon Apr 09 09:08:42 2007
ha10kx2k ha10kx2k.sys Mon Apr 09 09:08:15 2007
COMMONFX COMMONFX.DLL Mon Apr 09 09:08:38 2007
ctsfm2k ctsfm2k.sys Mon Apr 09 09:08:11 2007
emupia2k emupia2k.sys Mon Apr 09 09:08:10 2007
nvm62x64 nvm62x64.sys Fri Oct 17 17:01:06 2008
ctprxy2k ctprxy2k.sys Mon Apr 09 09:08:30 2007
ctoss2k ctoss2k.sys Mon Apr 09 09:08:14 2007
ctaud2k ctaud2k.sys Mon Apr 09 09:08:29 2007
ASACPI ASACPI.sys Sun Mar 27 22:30:36 2005 <<< check this one first

http://www.sevenforums.com/bsod-help-support/41124-random-bsods.html
Relevancy 46.87%

Hello,

I am having trouble with random BSODs, the system will lock up unexpectedly (sometime while surfing the web and sometimes while nobody is using the system). I have opened the .dmp files and noticed all seem to point to ntoskrnl.exe. I do not know what this is or why it is causing problems. My system data is correct in my profile and I have attached a .zip file of the minidumps. Can someone please help me with this issue?

Thanks in advance!

A:Help with random BSODs

  
Quote: Originally Posted by drummo4


Hello,

I am having trouble with random BSODs, the system will lock up unexpectedly (sometime while surfing the web and sometimes while nobody is using the system). I have opened the .dmp files and noticed all seem to point to ntoskrnl.exe. I do not know what this is or why it is causing problems. My system data is correct in my profile and I have attached a .zip file of the minidumps. Can someone please help me with this issue?

Thanks in advance!


Hi and welocome

Well I just took a quick look at the last 2 dumps. There are 2 probable causes. First Memory
Second cirrupt system files

Ok I would download ans run memtestx86 for hours (prefereably overnight)

I would alswo run a system file check to verify and repair any system files that are not right
It is going to take me a while to run the rest of those dumps so I suggest you not wait for the results

Hope this helps

Ken J+


Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\K\Desktop\111009-25116-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*d:\symbols*Symbol information
Executable search path is:
Windows 7 Kernel Version 7600 MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0xfffff800`02862000 PsLoadedModuleList = 0xfffff800`02a9fe50
Debug session time: Tue Nov 10 10:37:20.924 2009 (GMT-5)
System Uptime: 0 days 10:57:46.968
Loading Kernel Symbols
...............................................................
................................................................
...................................
Loading User Symbols
Loading unloaded module list
......
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 19, {20, fffffa800260d000, fffffa800260d600, 4600000}

GetPointerFromAddress: unable to read from fffff80002b0a0e0
Probably caused by : memory_corruption ( nt!MiSegmentDelete+b1 )

Followup: MachineOwner
---------

1: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

BAD_POOL_HEADER (19)
The pool is already corrupt at the time of the current request.
This may or may not be due to the caller.
The internal pool links must be walked to figure out a possible cause of
the problem, and then special pool applied to the suspect tags or the driver
verifier to a suspect driver.
Arguments:
Arg1: 0000000000000020, a pool block header size is corrupt.
Arg2: fffffa800260d000, The pool entry we were looking for within the page.
Arg3: fffffa800260d600, The next pool entry.
Arg4: 0000000004600000, (reserved)

Debugging Details:
------------------
BUGCHECK_STR: 0x19_20

POOL_ADDRESS: fffffa800260d000

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

PROCESS_NAME: System

CURRENT_IRQL: 0

LAST_CONTROL_TRANSFER: from fffff80002a056d3 to fffff800028d3f00

STACK_TEXT:
fffff880`02fffb08 fffff800`02a056d3 : 00000000`00000019 00000000`00000020 fffffa80`0260d000 fffffa80`0260d600 : nt!KeBugCheckEx
fffff880`02fffb10 fffff800`02bc1f49 : 00000000`00000001... Read more

http://www.sevenforums.com/bsod-help-support/39415-help-random-bsods.html
Relevancy 46.87%

Hi all,
I'm a first timer on this forum and could really use some help. I've put some time into building my very first system that runs Windows. In the past I've used linux, I never configured anything and it rarely crashed(knock on wood). Due to work I installed windows 7 on this machine hoping it would make life simpler. Instead I've received a plethora of BSOD's. I've done as much looking online as I could to resolve this problem but my eyes are hurting after two days-and still receiving the errors.

? OS - Windows 7 x64
? System came clean-I bought Windows 7 Home premium from Newegg
? Less than one year old
? I've re installed windows 7 times on this system. Most recently about 3 weeks ago.

? AMD Phenom II x4 955
? Radeon HD 4670
? GA-970A-D3 AM3+ by Gigabyte
? Tr2 Rx 750W Bronze Thermaltake
? Corsair Vengance 8GIG 1600
? WD Velociraptor 300GB

A:Random seeming BSODs

Hello kc_tiger and welcome to TSF!

There are a plethora of different bugchecks and none point to a solid culprit. Given you said the same system has no issues on Linux, but does on Windows, I'm going to off the bat recommend enabling Driver Verifier so we can see if Windows can snag a culprit 3rd party driver.

Please refer to the following thread to learn how to enable Driver Verifier:

http://www.techsupportforum.com/foru...ed-473665.html

Regards,

Patrick

http://www.techsupportforum.com/forums/f299/random-seeming-bsods-654270.html