Windows Support Forum

STOP: 0x0000001E during boot; following GPU driver changes

Q: STOP: 0x0000001E during boot; following GPU driver changes

The saga of driver fails continues from this thread on evga Ti GB vanilla version display kernel crashes I have a W OCZ I've now removed the Ti GB card from the system and am running in safe mode off of the A - k and enabled every single driver on startup except for a few I'm also getting a file STOP: following 0x0000001E driver boot; changes GPU during missing for AMD AVT kdbsync exe and I can't get Windows to install the CCC software because it fails every time There are a ton of old services and programs I can't seem to remove like a Creative mouse I had installed for about a week several years ago and the Asus utilities from a dead video card I actually used CCleaner STOP: 0x0000001E during boot; following GPU driver changes on the registry to try to remove some of the accumulated gunk but I'm wondering if it made it now BSOD in Windows more than it did before I had the system stable prior to the nVidia card install and now I can't even boot to desktop It loads to desktop but then BSODs as soon as it hits a specific service I'm wondering if it's not the PSU that is behind this but it seems easy too easy Unlike most posters I plan to do a follow-up if the situation is resolve or not resolved

Relevancy 100%
Preferred Solution: STOP: 0x0000001E during boot; following GPU driver changes

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: STOP: 0x0000001E during boot; following GPU driver changes

You have done a lot to troubleshoot your issue.

Do one more thing. Remove the Creative Audigy Audio Processor and see how it goes.

Dont attach the GPU back befor our current test is over, as the GPU driver lately installed is a BETA, it may fail at its own virtue. Just Remove the Creative Audigy, and disable all the startup items other than MSC.

Then restart the computer a couple of times. Does it BSOD? Let us know.

If yes, post it following the Blue Screen of Death (BSOD) Posting Instructions.

http://www.sevenforums.com/bsod-help-support/304739-stop-0x0000001e-during-boot-following-gpu-driver-changes.html
Relevancy 73.53%

Full stop error x E x x x x Recent hardware changes Msi Nvidia GTX installed over a week ago with no problems Explanation Hello I've been having a rough one of it with a problem that started two days ago and still persists I'm completely unable to perform a normal boot currently I get the BSOD everytime right after BSOD boot, during error stop 0x0000001e Windows loads and Im about to see the password screen The problem happened while playing The Crew BSOD during boot, stop error 0x0000001e pc game an adobe flash update kept forcing priority and taking me out of the game I kept exiting out but it would come back I got frustrated and just hit yes and when it went to install and before BSOD during boot, stop error 0x0000001e the installer really even started up my computer went to reboot When it tried to reboot I got my BSOD error I initially thought this was a virus then from the update but my stop error usually deals with driver issues so I've found Of course I did several passes of both AVG and malwarebytes but came up with nothing I can boot into safe mode fine and I've tried to reinstall my gpu drivers I installed Driver Genie and tried to update the few that it said were out-of-date as well only for their installers to not run correctly this happened twice for my chipset drivers and another that escapes me right now before giving up on trying the rest I have also tried to re-seat my graphics card ram and boot drive I also ran just one pass of memtest on my ram and it did fine I've tried more or less all of my system restore points last known working configuration and have tried to set my bios settings back to optimal I'm at a bit of a loss as to what to try next can anybody give my dump files a look for me and give any suggestions I'll be online giving this close attention so let me know if you need more info at all Thanks Here's my SF tool file Attachment

A:BSOD during boot, stop error 0x0000001e

Ran Tweaking.com's Windows All-in-one repair, still no luck. Here is an updated file though.
Attachment 342125

http://www.sevenforums.com/bsod-help-support/354163-bsod-during-boot-stop-error-0x0000001e.html
Relevancy 72.67%

Hi I hope someone can help with my BSOD problem Here are the details Is Windows Home Premium - x -bit - I've restored the original installed OS on the system using 'Restore Factory Settings' - an cold - stop on BSOD code boot 0x0000001E OEM version - The age of system hardware is months old - I've reinstalled the OS because of this BSOD problem but I'm still getting the same problem This problem started a couple of weeks ago I always have a BSOD on a cold boot usually in the morning when I switch it on It also occurs if I shut down the comp for a significant length of time I never have this problem if I warm boot restart the comp no matter how many times I restart it doesnt happen I thought maybe I had BSOD on cold boot - stop code 0x0000001E a virus so reinstalled the OS on the C drive twice once from a disc backup I know is clean and once from the partition The BSOD came back after both instances I've followed your BSOD posting guidelines and have included the zipped Windows NT BSOD jcgriff folder and system health report Any help with this would be very much appreciated and I thank you in advance P S If any more info is needed let me know I'll be monitoring this thread regularly Cheers

A:BSOD on cold boot - stop code 0x0000001E

Code:
Loading Dump File [C:\Users\Mike\Downloads\BSODDmpFiles\alcatraz\Windows_NT6_BSOD_jcgriff2\011212-27003-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\users\mike\documents\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Machine Name:
Kernel base = 0xfffff800`03064000 PsLoadedModuleList = 0xfffff800`032a9670
Debug session time: Thu Jan 12 05:48:45.501 2012 (UTC - 7:00)
System Uptime: 0 days 0:08:39.000
Loading Kernel Symbols
...............................................................
................................................................
..................................
Loading User Symbols
Loading unloaded module list
.....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1E, {0, 0, 0, 0}

Probably caused by : hardware ( volmgr!VmReadWrite+bf )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

KMODE_EXCEPTION_NOT_HANDLED (1e)
This is a very common bugcheck. Usually the exception address pinpoints
the driver/function that caused the problem. Always note this address
as well as the link date of the driver/image that contains this address.
Arguments:
Arg1: 0000000000000000, The exception code that was not handled
Arg2: 0000000000000000, The address that the exception occurred at
Arg3: 0000000000000000, Parameter 0 of the exception
Arg4: 0000000000000000, Parameter 1 of the exception

Debugging Details:
------------------


EXCEPTION_CODE: (Win32) 0 (0) - The operation completed successfully.

FAULTING_IP:
+3130336631346535
00000000`00000000 ?? ???

EXCEPTION_PARAMETER1: 0000000000000000

EXCEPTION_PARAMETER2: 0000000000000000

ERROR_CODE: (NTSTATUS) 0 - STATUS_WAIT_0

BUGCHECK_STR: 0x1E_0

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

PROCESS_NAME: svchost.exe

CURRENT_IRQL: 0

EXCEPTION_RECORD: fffff88006394848 -- (.exr 0xfffff88006394848)
ExceptionAddress: fffff88000e5612f (volmgr!VmReadWrite+0x00000000000000bf)
ExceptionCode: c000001d (Illegal instruction)
ExceptionFlags: 00000000
NumberParameters: 0

TRAP_FRAME: fffff880063948f0 -- (.trap 0xfffff880063948f0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=fffffa80042c0ee0 rbx=0000000000000000 rcx=fffff88000e56010
rdx=fffffa80042c0c60 rsi=0000000000000000 rdi=0000000000000000
rip=fffff88000e5612f rsp=fffff88006394a80 rbp=00000000ffffffff
r8=fffffa80049a6540 r9=0000000000000003 r10=0000000000000000
r11=fffffa80042c0ee0 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei pl zr na po nc
volmgr!VmReadWrite+0xbf:
fffff880`00e5612f f080bba500000000 lock cmp byte ptr [rbx+0A5h],0 ds:a9a0:00000000`000000a5=??
Resetting default scope

MISALIGNED_IP:
volmgr!VmReadWrite+bf
fffff880`00e5612f f080bba500000000 lock cmp byte ptr [r... Read more

http://www.sevenforums.com/bsod-help-support/207945-bsod-cold-boot-stop-code-0x0000001e.html
Relevancy 59.77%

I have a STOP: 0x0000001E erro in Windows 2000 I cannot resolve.

I have upgraded 98 to 2000 SP4 without problems, everything was fine. I booted p, reinstalled office 2000 due to office start messages and then rebooted. In now get the following:

STOP: 0x0000001E (0xC0000005,0xED3D2458,0x00000000,0x00000028)
KMODE_EXCEPTION_NOT_HANDLED

I have NO message indicating where the error is occuring.
I have 1.5 GB free disc space.
I can boot into safe mode, but I have no idea what to check after that. Video adapter looks fine (was fine before office 2000).
I have run a Repair without success.

I am desparate for advice.

Many thanks
Trev.
 

A:STOP: 0x0000001E

http://aumha.org/win5/kbestop.php
 

https://forums.techguy.org/threads/stop-0x0000001e.277647/
Relevancy 59.77%

I installed a webcam back in May and it worked fine until now, everytime i try to use my webcam now it goes to the blue screen, with the first line saying STOP: 0x000000E1 (0xC000005, 0xFC2F30C3, 0x00000000, 0x0459C0F4) and the second line says KMODE_EXCEPTION_NOT_HANDLED and thats it. I have a windows 2000 5.00.2195 Service Pack 4 and the cam im using is Elitech PC-319-SL
 

Relevancy 58.91%

Hello I am really stressed about my BSOD problem w my Windows Professional Pk operating system My computer will STOP: 0X0000001E Problem! not startup properly then goes to blue screen w the message STOP X E xc XEB E FA x x KMODE EXCEPTION NOT HANDLED Address EB E FA base at EB E Date stamp eac STOP: 0X0000001E Problem! d-ohctusb STOP: 0X0000001E Problem! sys Beginning dump of physical memory Dumping physical memory to disk then it counts down to and reboots starting the above process all over again I ve been looking for help online and speaking to people but everyone is down on me for still using Windows Professional Am willing to upgrade to XP if I can figure out the current problem So far I have purchased Registry Fix tried using the ERD Recovery Console and clean nstallation Nothing works but the good news is that it does work in SAFE MODE and all of my files are there PLEASE help I m not sure what to do next Best Isabel nbsp

Relevancy 58.91%

Hey I keep getting the "STOP Error 0x0000001E" screen, it does a dump and then restarts as normal. It seems more likely to come up when I am watching videos or playing a game. Any help would be greatly appreciated.
Thanks

A:STOP Error 0x0000001E

Welcome to SF.

The .nfo file uploaded is corrupt.

Please upload your msinfo32.nfo file. To get this: Start Menu -> Type msinfo32 into the Search programs and files box -> When it opens, go to File, Save -> Save as msinfo32.nfo and save in a place you will remember -> Let it finish the process of gathering and saving the system info -> Right click the .nfo file, click send to compressed (zipped) folder -> Upload the .zip file here.

Please upload your msinfo32.txt file. To get this: Start Menu -> Type msinfo32 into the Search programs and files box -> When it opens, go to File, Export -> Save as msinfo32.txt and save in a place you will remember -> Let it finish the process of gathering and saving the system info -> Right click the .txt file, click send to compressed (zipped) folder -> Upload the .zip file here.

http://www.sevenforums.com/bsod-help-support/267059-stop-error-0x0000001e.html
Relevancy 58.91%

This is the fourth time in two weeks that my system has thrown this error up, I am more than happy to provide any details needed, blue screen viewer shows that it is caused by tcpip.sys.
 
I am not sure what details to send so you guys can check it out but any help you can give would be very much appreciated.
 
All the best.

A:BSOD - STOP 0x0000001E please help!

Hi
 
Please follow the below steps.
 
Upload the actual crash dump files.
 
You will find the crash dump files inside C:\Windows\Minidump folder. To copy the dumps, disable "User Account Control" first. Otherwise you may receive a permission error. After disabling UAC, copy and zip most recent three or more dumps to a single file. Either attach the zip with next reply using "More reply options --> Attach files" or use a free file hosting site. 
 
For example -> http://www.mediafire.com/
 
Publish a snapshot of your system using Speccy.
 
"Speccy" is a free tool which can list the hardware specs, temperature status, installed Windows updates, HDD SMART info etc of your system. Please read the below tutorial to know how to use "Speccy" to collect system info.
 
http://www.bleepingcomputer.com/forums/t/323892/publish-a-snapshot-using-speccy/
 
Don't paste the output displayed by "Speccy" here. Instead paste the web link it displays.
 
Minitoolbox log.
 
"Minitoolbox" can list all the installed programs as well as event log errors in your system. Download "Minitoolbox" from the below link.
 
http://www.bleepingcomputer.com/download/minitoolbox/
 
 Run the tool and only select the following tick boxes.
 
 
List last 10 Event viewer errors
List installed program
List users, partition and memory size
List Minidumps
 
Now click "Go" and post the output displayed in next reply.

http://www.bleepingcomputer.com/forums/t/513089/bsod-stop-0x0000001e-please-help/
Relevancy 58.91%

System is approx five months old Windows 7 64 bit home premium came preinstalled. Please advise if any additional info is needed.
System specs include all devices at time of bsod. I have disconnected the usb drives that were attached

A:BSOD STOP: 0x0000001e

Software Concerns:Security Software: ??? I see Sophos installed, but I do not see it running. Is it running, or is it even actually installed?

Make sure to install security software. I recommend either of these:Microsoft Security Essentials - Free Antivirus for Windows coupled with Malwarebytes. Do not start the free trial of Malwarebytes. Just use the standalone version, update it, and scan your computer once a week with Malwarebytes and with Microsoft Security Essentials.

Good and Free system security combination.

After installing your security software, update it, and then run full scans today with each program. Report back the results of the scans.

Analysis:Crashes point to your wireless network adapter. Yours appears to be a USB device with Atheros drivers (you may have a different manufacturer). I would advice replacing the USB wireless network adapter with a Windows 7 compatible PCI wireless adapter. If you cannot replace the USB device with a PCI device, at least get a USB device that is Windows 7 compatible; yours is from 2008 and is pre-Windows 7.

Keep in mind that if you do stay with USB wireless network adapters instead of PCI, they are inherrently unstable. USB ports do not supply adequate power for those devices to work reliably. You are much better off with a PCI device if you can find one that meets your needs and fits your system's hardware configuration.

http://www.sevenforums.com/bsod-help-support/240203-bsod-stop-0x0000001e.html
Relevancy 58.91%

Hello I am 0x0000001E w/ Problem Help Stop: really stressed about my Help w/ Stop: 0x0000001E Problem BSOD problem w my Windows Professional Pac operating system My computer will not startup properly then goes to blue screen w the message STOP X E xc XEB E FA x x KMODE EXCEPTION NOT HANDLED Address EB E FA base at EB E Date stamp eac d-ohctusb sys Beginning dump of physical memory Dumping physical memory to disk then it counts down to and reboots starting the above process all over again I ve been looking for help online and speaking to people but everyone is down on me for still using Windows Professional Am willing to upgrade to XP if I can figure out the current problem So far I have purchased Registry Fix tried using the Help w/ Stop: 0x0000001E Problem ERD Recovery Console and clean nstallation Nothing works but the good news is that it does work in SAFE MODE and all of my files are there PLEASE help I m not sure what to do next Best Isabel nbsp

Relevancy 58.91%

Got 2 BSOD today with one being stop 0x0000001e and the other IRQL LESS OR EQUAL... not sure why all gpu and cpu ocs are off and are on default and my system is less than a year old with all good quality parts.
Thanks

A:BSOD stop 0x0000001e

Looking at your dump files I see numerous errors, however there is a particular function that has caught my eye.


Code:
BugCheck 1000007E, {ffffffffc0000005, fffff80003506622, fffff880033e06d8, fffff880033dff30}

Probably caused by : ntkrnlmp.exe ( nt!KxWaitForLockOwnerShip+12 )
This function, because it's undocumented there isn't too much about it.
I will take an educated guess and say it looks like a thread is trying to take ownership of a mutex object but is having to wait for some reason.

We can see an access violation which means the CPU has tried to access memory that is simply not available, whether it's due to a null pointer or the address trying to access has already been freed.


Code:
4: kd> ln fffff80003506622
(fffff800`03506610) nt!KxWaitForLockOwnerShip+0x12 | (fffff800`03506660) nt!KxWaitForLockChainValid
There's the access violation that occurred at nt!KxWaitForLockOwnerShip


Code:
4: kd> u nt!KxWaitForLockOwnerShip+12
nt!KxWaitForLockOwnerShip+0x12:
fffff800`03506622 48890a mov qword ptr [rdx],rcx
fffff800`03506625 33db xor ebx,ebx
fffff800`03506627 660f1f0400 nop word ptr [rax+rax]
fffff800`0350662c ffc3 inc ebx
fffff800`0350662e 851d946d2000 test dword ptr [nt!HvlLongSpinCountMask (fffff800`0370d3c8)],ebx
fffff800`03506634 0f847fb3faff je nt! ?? ::FNODOBFM::`string'+0x5da0 (fffff800`034b19b9)
fffff800`0350663a f390 pause
fffff800`0350663c 488b4f08 mov rcx,qword ptr [rdi+8]
We can see the pause function, probably waiting to acquire the mutex object.


Code:
Unable to load image \SystemRoot\system32\DRIVERS\atikmdag.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
atikmdag+0x7dfb1
Looking at the raw stack I can see that your display driver is causing issues.


Code:
7: kd> lmvm atikmdag
start end module name
fffff880`1102d000 fffff880`11fd6000 atikmdag T (no symbols)
Loaded symbol image file: atikmdag.sys
Image path: \SystemRoot\system32\DRIVERS\atikmdag.sys
Image name: atikmdag.sys
Timestamp: Fri May 23 02:46:07 2014 (537EA85F)
CheckSum: 00F417E6
ImageSize: 00FA9000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
You are at the latest version, try rolling back to an earlier version.

I find these instructions useful.

How-To Install AMD Catalyst? Drivers For A Windows? Based System

Looking at your unloaded modules I see this.


Code:
Unloaded modules:
fffff880`081e9000 fffff880`081fa000 WinUsb.sys
fffff880`081e9000 fffff880`081fa000 WinUsb.sys
fffff880`081e9000 fffff880`081fa000 WinUsb.sys
fffff880`081e9000 fffff880`081fa000 WinUsb.sys
fffff880`081e9000 fffff880`081fa000 WinUsb.sys
fffff880`081e9000 fffff880`081fa000 WinUsb.sys
fffff880`081e9000 fffff880`081fa000 WinUsb.sys
fffff880`081e9000 fffff880`081fa000 WinUsb.sys
fffff880`081e9000 fffff880`081fa000 WinUsb.sys
fffff880`081e9000 fffff880`081fa000 WinUsb.sys
fffff880`081e9000 fffff880`081fa000 WinUsb.sys
fffff880`081f2000 fffff880`081fe000 ggsemc.sys
fffff880`081e9000 fffff880`081f2000 ggflt.sys
fffff880`081f2000 fffff880`081fe000 ggsemc.sys
fffff880`081e9000 fffff880`081f2000 ggflt.sys
fffff880`081f2000 fffff880`081fe000 ggsemc.sys
fffff880`081e9000 fffff880`081f2000 ggflt.sys
fffff880`081f2000 fffff880`081fe000 ggsemc.sys
fffff880`081e9000 fffff880`081f2000 ggflt.sys
fffff880`081f2000 fffff880`081fe000 ggsemc.sys
fffff880`081e9000 fffff880`081f2000 ggflt.sys
fffff880`081f2000 fffff880`081fe000 ggsemc.sys
fffff880`081e9000 fffff880`081f2000 ggflt.sys
fffff880`07376000 fffff880`073e7000 spsys.sys
fffff880`08000000 fffff880`08036000 WUDFRd.sys
fffff880`015d7000 fffff880`015e5000 crashdmp.sys
fffff880`015e5000 fffff880`015ef000 dump_storpor
fffff880`0121b000 ff... Read more

http://www.sevenforums.com/bsod-help-support/333173-bsod-stop-0x0000001e.html
Relevancy 58.91%

Need help on this BSOD that keep coming up. I have re-installed windows multiple times and still get the BSOD.

Here is a picture of the BSOD:
Attached are the dump files. Any feedback would really be appreciated.

Thank you.

*Sorry for the picture being sideways, If you click the link it shows it in the proper orientation

A:Need Help on a BSOD STOP: 0x0000001E

Hi,
There is a lot of info missing from your dump files.
Here are the instructions for posting:

http://www.sevenforums.com/crashes-d...tructions.html



   Tip
Ensure you click the "GRAB ALL" button and then wait for each window to appear in turn and then click OK

Cheers

Dave

http://www.sevenforums.com/bsod-help-support/284685-need-help-bsod-stop-0x0000001e.html
Relevancy 58.91%

Getting this BSOD error while doing pretty much anything.

Attached is the required information/files.

Specifications
- x64 (64 bit)(Ultimate)- Windows 7 is the original OS
- Full retail copy
- hardware ranging from about 3/4 years to a few days
- OS installed a few days ago
- Radeon 4850 HD
- Ripjaw 8GB DDR3 1600 MHz Dual Channel
- AMD Athlon II x4 2.9 GHz

A:BSOD - STOP 0x0000001e (While Doing Anything it Seems)

Perfmon reports that drivers for your coprocessor haven't been installed. Please visit the PC Manufacturer's website and download and install the chipset drivers for your system ( http://www.nvidia.com/object/nforce-...56-driver.html ). Then run another perfmon /report to ensure that the update has succeeded.

You only have 55 updates after SP1, most systems have 70 or more. Please visit Windows Update and get all available updates (language packs aren't necessary).






Quote:
AMD OverDrive (AODDriver2.sys) is either a stand-alone application, or a component of the AMD VISION Engine Control Center.
Please uninstall the AMD OverDrive program as it can cause BSOD's on your system.
If it's the stand-alone app, uninstall it via Control Panel...Programs...Uninstall a program
If it's in the AMD VISION Engine Control Center, you can uninstall it using the AMD uninstall tool (or uninstall the entire AMD VISION Engine Control Center application through Control Panel


If overclocking, please stop. Remove the overclock and return the system to stock/standard values while we're troubleshooting. Once the system is stable again, feel free to resume the overclocking.

Western Digital software dates from 2008, please uninstall it.
Your nVidia Ethernet Networking Driver dates from 2008 also. You can download the latest chipset drivers (which include the ethernet driver) from here: NVIDIA DRIVERS 15.56 WHQL

BSOD BUGCHECK SUMMARY

Code:

Loading Dump File [C:\Users\FUBAR\_jcgriff2_\dbug\__Kernel__\012812-26234-01.dmp]
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Sun Jan 29 02:04:51.596 2012 (UTC - 5:00)
System Uptime: 0 days 7:46:30.943
Probably caused by : ntkrnlmp.exe ( nt!KiKernelCalloutExceptionHandler+e )
BUGCHECK_STR: 0x1E_0
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0x1E_0_nt!KiKernelCalloutExceptionHandler+e
Bugcheck code 0000001E
Arguments 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000
BiosVersion = V1.7
BiosReleaseDate = 03/03/2011
??????????????????????????????????????????????????????????????????????????????????????``
Loading Dump File [C:\Users\FUBAR\_jcgriff2_\dbug\__Kernel__\012812-35625-01.dmp]
Built by: 7600.16841.amd64fre.win7_gdr.110622-1503
Debug session time: Sat Jan 28 16:38:14.048 2012 (UTC - 5:00)
System Uptime: 0 days 13:08:24.470
Probably caused by : ntkrnlmp.exe ( nt!IopXxxControlFile+2fb )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x3B
PROCESS_NAME: launcher.exe
FAILURE_BUCKET_ID: X64_0x3B_nt!IopXxxControlFile+2fb
Bugcheck code 0000003B
Arguments 00000000`c000001d fffff800`033e028b fffff880`07a9e040 00000000`00000000
BiosVersion = V1.7
BiosReleaseDate = 03/03/2011
??????????????????????????????????????????????????????????????????????????????????????``
Loading Dump File [C:\Users\FUBAR\_jcgriff2_\dbug\__Kernel__\012712-45812-01.dmp]
Built by: 7600.16841.amd64fre.win7_gdr.110622-1503
Debug session time: Fri Jan 27 23:56:38.316 2012 (UTC - 5:00)
System Uptime: 0 days 0:10:58.738
Probably caused by : Ntfs.sys ( Ntfs!NtfsFullDeleteLcb+45 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: VSSVC.exe
BUGCHECK_STR: 0x24
FAILURE_BUCKET_ID: X64_0x24_Ntfs!NtfsFullDeleteLcb+45
Bugcheck code 00000024
Arguments 00000000`001904fb fffff880`06d97408 fffff880`06d96c70 fffff800`02e9fd27
BiosVersion = V1.7
BiosReleaseDate = 03/03/2011
??????????????????????????????????????????????????????????????????????????????????????``
Loading Dump File [C:\Users\FUBAR\_jcgriff2_\dbug\__Kernel__\012712-38718-01.dmp]
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Fri Jan 27 17:18:27.587 2012 (UTC - 5:00)
System Uptime: 0 days 0:01:57.962
Probably caused by : ntkrnlmp.exe ( nt!KiCommitThreadWait+2b9 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x3B
PROCESS_NAME: CCC.exe
FAILURE_BUCKET_ID: X64_0x3B_nt!KiCommitThreadWait+2b9
Bugcheck code 0000003B
Arguments 00000000`c... Read more

http://www.sevenforums.com/bsod-help-support/211241-bsod-stop-0x0000001e-while-doing-anything-seems.html
Relevancy 58.91%

Good Morning!

Having some trouble with a laptop given to me by a friend. Attached are the documents requested by the pinned thread.

The system is a Dell Inspiron N7110.
Also attached is a system configuration from the manufacturer. Not sure if that helps at all.
Currently, my troubleshooting options have been as such: Attempted start-up repair. Start-up repair did not resolve the issue. Did a full hardware diagnostics check. All components are good with minor battery issues due to normal aging and wear. After booting to safe-mode, Installed Malwarebytes. Blue-screen upon end of installation. Rebooted, and uninstalled/reinstalled malwarebytes. Unable to fully scan system without a blue-screen.

Any recommendations?

If you have any assistance to offer, I would appreciate it. Unfortunately, I don't have much to give in return at the moment other than kind words. :/

A:BSOD - STOP: 0x0000001E & more

The latest .dmp files don't provide any conclusive evidence as to the crash.

Please do the following:

Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.
Driver Verifier - Enable and Disable

Driver Verifier will cause your computer to run very sluggishly - this is normal. What it is trying to do is force your system to BSOD and isolate the offending driver/s. When it does, reboot, disable driver verifier, reboot as normal and upload the new dmp file/s here.

I recommend creating a system restore point before turning on driver verifier:
System Restore Point - Create

If your system fails to boot to desktop once driver verifier is enabled, turn it off by booting into Safe Mode:
Safe Mode

http://www.sevenforums.com/bsod-help-support/345462-bsod-stop-0x0000001e-more.html
Relevancy 58.91%

Computer recently had W7 64-bit installed and has been working fine for over a week.

That was until this morning. I received STOP 0x0000001E while using Chrome and now the computer is in a startup BSOD loop. When the computer is loading startup programs when booting outside of safe mode the whole process seems inordinately sluggish then after about roughly a minute a BSOD will occur. However the system runs fine in safe mode as I am currently using it to post this request.

I have attached the dump files gathered using Seven Diagnostic Tools. Any help you guys can give me with regards to this would be greatly appreciated!

A:STOP 0x0000001E while using Chrome

Welcome

Why are you using the Enterprise version of Windows 7?

Code:
STOP 0x0000001E: KMODE_EXCEPTION_NOT_HANDLED
Usual causes: Device driver, hardware, System service, compatibility,
Remote control programs, memory, BIOS
BugCheck 1E, {ffffffffc0000005, fffff80002a7a7ef, 0, 7efa0000}
Probably caused by : ntkrnlmp.exe ( nt!RtlImageNtHeaderEx+3f )
Suggestions:
Uninstall AVG, it causes BSoDs. Use free MSE (at least to test). Make a full scan once installed and updatedAVG | Download tools and utilities
Microsoft Security Essentials - Free Antivirus for Windows

Run the System File Checker that scans the the integrity of all protected Windows 7 system files and replaces incorrect corrupted, changed/modified, or damaged versions with the correct versions if possible:SFC /SCANNOW Command - System File Checker
Run Disk Check on your hard disk for file system errors and bad sectors on it:Disk Check
Remove any 3rd party remote control programs during troubleshooting
Code:
Driver c:\windows\system32\drivers\atikmpag.sys (8.14.1.6264, 351.50 KB (359,936 bytes), 7/3/2012 10:10 PM)
Update your graphic card drivers to their latest:Download and install Driver Sweeper:
→ |MG| Driver Fusion (Driver Sweeper) 1.2.0 Download
Download the auto-detect tool for AMD.
→ AMD Driver Autodetect
Boot into Safe Mode from Advanced Boot Options:
→ Advanced Boot Options
Type in Driver Fusion in Search
Remove all drivers
Boot normally now, and install the latest drivers from the
auto-detect program you downloaded.

Let us know the results and further blue screens if any

http://www.sevenforums.com/bsod-help-support/258636-stop-0x0000001e-while-using-chrome.html
Relevancy 58.91%

Hi all,

Hope someone can help - I've had two BSOD happen while doing nothing particularly demanding on the operating system. See below for information from Windows on the error:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 2057

Additional information about the problem:
BCCode: 1e
BCP1: FFFFFFFFC0000005
BCP2: FFFFF8800C532CB0
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

I guess you are able to see what my set up is from my profile, but if useful:

Windows Version: Microsoft Windows 7 Home Premium
System Name: HP Pavilion g6 Notebook PC
Processor Name: AMD A6-3420M APU with Radeon(tm) HD Graphics
BIOS Name: InsydeH2O Version CCB.03.61.31F.52
Video card Name: AMD Radeon(TM) HD 6520G
Installed Memory: 6.00 GB

Many thanks in advance for any help with this issue.

Regards,
Ben

A:Bsod stop: 0x0000001e

Please follow Blue Screen of Death (BSOD) Posting Instructions to grab all and upload a report here.

http://www.sevenforums.com/bsod-help-support/358726-bsod-stop-0x0000001e.html
Relevancy 58.91%

I hope someone can help im really stuck with this problem The full error is - stop x E x x x x To add to the crash my pc them does not restart Sometime i have to leave it 0x0000001E stop: BSOD - for an hour or overnight before it will boot All i hear is the fan's but there's nothing on to screen When the Pc does boot ok it of course goes through all the checks you get after a crash it can be anything from minute to hours and it will crash again This makes it difficult to actually work on it I'll do my best to upload a dump file as soon as i can typing from a laptop right now So far i have tried the following with various help by searching on google Reinstalling windows Returned my mobo cpu and Ram to the shop was bought as a bundle all tested fine Assuming it could only be my graphics card i have bought a new one I also bought a new PSU

A:BSOD - stop: 0x0000001E

  
Quote: Originally Posted by rosshan


I hope someone can help, im really stuck with this problem.

The full error is - stop: 0x0000001E (0x0000000000000000, 0x0000000000000000, 0x0000000000000000, 0x0000000000000000)

To add to the crash, my pc them does not restart. Sometime i have to leave it for an hour or overnight before it will boot. All i hear is the fan's but there's nothing on to screen.

When the Pc does boot ok (it of course goes through all the checks you get after a crash) it can be anything from 1minute to 2 hours and it will crash again. This makes it difficult to actually work on it.

I'll do my best to upload a dump file as soon as i can (typing from a laptop right now).

So far i have tried the following (with various help by searching on google).

Reinstalling windows.

Returned my mobo, cpu and Ram to the shop (was bought as a bundle), all tested fine.

Assuming it could only be my graphics card, i have bought a new one. I also bought a new PSU.




To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:

* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.

To ensure minidumps are enabled:

Go to Start, in the Search Box type: sysdm.cpl, press Enter.
Under the Advanced tab, click on the Startup and Recovery Settings... button.
Ensure that Automatically restart is unchecked.
Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
OK your way out.
Reboot if changes have been made.

http://www.sevenforums.com/bsod-help-support/156035-bsod-stop-0x0000001e.html
Relevancy 58.48%

Last night I attempted to install Windows 2000 Professional (using the upgrade option) from WindowsME upgrade (got tired of the constant errors & crashes). Now, when I attempt to start up the computer I get the following blue screen of death+error:

***Stop: 0x0000001E (0xC0000005), 0x805667B8, 0x00000000, 0x0000000C) KMODE_EXCEPTION_NOT_HANDLED

***Address 805667B8 base at 8040000, DateStamp 384d9b17_ntoskrnl.exe

I tried to do the troubleshooting procedures suggested in the installation manual, but am unsure of the bios part. I should also point out that I attempted to boot up in safe mode with no success...just got the same error.

Is there anything I can do to get the OS up and running without having to f-disk and reinstall my previous OS? HELP!!

Here's my computer info:
Processor - Pentium-S 166 MHz
Base memory - 640k
Extended memory - 162816k
Award Modular BIOS v4. (ASUS P5A-B ACPI BIOS)

Thanks!
 

A:Stop: 0x0000001E error on installation (W2K Pro)

Not sure but in WinME there is a restore WinME in Help... on the left side mid ways down... go to Help & see that
Savvy
 

https://forums.techguy.org/threads/stop-0x0000001e-error-on-installation-w2k-pro.61013/
Relevancy 58.48%

Hi,

Getting this BSOD Stop error Stop: 0x0000001E

No mdp file is generated. Cannot seem to find anything noteworthy in Event Viewer either.

Anyone got any ideas? Generating the mdp file would help

The behaviour right before the error does not seem to be consistent either, sometimes im surfing the web. Othertimes there is virtually only 1 or 2 programs running.

Thanks

A:BSOD Error Stop: 0x0000001E

  
Quote: Originally Posted by ANFIELD29



No mdp file is generated. Cannot seem to find anything noteworthy in Event Viewer either.


Whatever, post it following the Blue Screen of Death (BSOD) Posting Instructions. A 0x1E BSOD may be caused by a wide range of reasons, from a device driver to the BIOS. Without seeing the files, nobody can get any idea.

http://www.sevenforums.com/bsod-help-support/295879-bsod-error-stop-0x0000001e.html
Relevancy 58.48%

Recently out of no where I've started seeing BSODs, reading the Blue screen and searching for the error hasn't returned any useful results.

The search results ask me to update my bios, check for free disk space or any driver corruption. I'm refraining from updating my bios as I don't believe it's needed and there is plenty of free disk space. I imagine a driver is causing this but I'm unsure of which one as the BSOD isn't very clear.

Currently I am running Windows 7 64 bit and specs are as follows.

CPU: 2600K
Video Card: ATI 7970
MotherBoard: Sabertooth P67
Power Supply: Corsair 850

A:[SOLVED] BSOD: STOP 0X0000001E

Hi,

Both of the attached DMP files are of the KMODE_EXCEPTION_NOT_HANDLED (1e) bug check.

This indicates that a kernel-mode program generated an exception which the error handler did not catch.

If we take a look at the call stack:


Code:

STACK_TEXT:
fffff800`00b9bab8 fffff800`02e815be : 00000000`00000017 00000000`00000001 fffff800`00b9c2c0 fffff800`02eb4a90 : nt!KeBugCheck
fffff800`00b9bac0 fffff800`02eb475d : fffff800`03098380 fffff800`02fd5260 fffff800`02e14000 fffff800`00b9c220 : nt!KiKernelCalloutExceptionHandler+0xe
fffff800`00b9baf0 fffff800`02eb3535 : fffff800`02fd9038 fffff800`00b9bb68 fffff800`00b9c220 fffff800`02e14000 : nt!RtlpExecuteHandlerForException+0xd
fffff800`00b9bb20 fffff800`02eb6832 : fffff800`00b9c220 fffff800`00b9c2c0 fffffa80`00000001 00000000`00000000 : nt!RtlDispatchException+0x415
fffff800`00b9c200 fffff800`02e3f98a : 00000000`00000000 00000000`00000000 00000000`00000000 fffffa80`09052d00 : nt!RtlRaiseStatus+0x4e
fffff800`00b9c7a0 fffff880`0236a081 : fffff880`0236d670 00000000`00000000 00000000`00000001 fffff800`02ec7000 : nt! ?? ::FNODOBFM::`string'+0xf429
fffff800`00b9c820 fffff880`0236d670 : 00000000`00000000 00000000`00000001 fffff800`02ec7000 fffffa80`00000000 : Lachesis+0x1081
fffff800`00b9c828 00000000`00000000 : 00000000`00000001 fffff800`02ec7000 fffffa80`00000000 fffff880`00000000 : Lachesis+0x4670
FAILURE_BUCKET_ID: X64_0x1E_0_Lachesis+1081

^^ Two Lachesis.sys calls, and also involved in the failure bucket ID with a call stack match. Lachesis.sys if not obvious by the name enough is the Razer Lachesis mouse drivers.

My recommendation for Razer drivers is always to uninstall their garbage Synapse software / Razer drivers you have installed, shut down, unplug mouse, boot back up, plug mouse back in, allow Windows to install generic drivers.

Unless you don't have DPI switching on the mouse itself physically, you won't be missing out on any features really aside from setting profiles, etc.

---------------------------------------------------------------

If you're still crashing after the above, go ahead and enable Driver Verifier as I am seeing a few more potential conflicts:

Driver Verifier:

What is Driver Verifier?

Driver Verifier is included in Windows 8, 7, Windows Server 2008 R2, Windows Vista, Windows Server 2008, Windows 2000, Windows XP, and Windows Server 2003 to promote stability and reliability; you can use this tool to troubleshoot driver issues. Windows kernel-mode components can cause system corruption or system failures as a result of an improperly written driver, such as an earlier version of a Windows Driver Model (WDM) driver.

Essentially, if there's a 3rd party driver believed to be at issue, enabling Driver Verifier will help flush out the rogue driver if it detects a violation.

Before enabling Driver Verifier, it is recommended to create a System Restore Point:

Vista - START | type rstrui - create a restore point
Windows 7 - START | type create | select "Create a Restore Point"
Windows 8 - Restore Point - Create in Windows 8

How to enable Driver Verifier:

Start > type "verifier" without the quotes > Select the following options -

1. Select - "Create custom settings (for code developers)"
2. Select - "Select individual settings from a full list"
3. Check the following boxes -
- Special Pool
- Pool Tracking
- Force IRQL Checking
- Deadlock Detection
- Security Checks (Windows 7 & 8)
- DDI compliance checking (Windows 8)
- Miscellaneous Checks
4. Select - "Select driver names from a list"
5. Click on the "Provider" tab. This will sort all of the drivers by the provider.
6. Check EVERY box that is NOT provided by Microsoft / Microsoft Corporation.
7. Click on Finish.
8. Restart.

Important information regarding Driver Verifier:

- If Driver Verifier finds a violation, the system will BSOD.

- After enabling Driver Verifier and restarting the system, depending on the cul... Read more

http://www.techsupportforum.com/forums/f299/solved-bsod-stop-0x0000001e-756825.html
Relevancy 58.48%

Getting very intermittent stop errors,:0x0000001e(0xc0000005,0x080420108,0x0000000,0x00000517) kmode_exception not handled, Address 80420108 Base at 80400000, Date stamp 3d366b8-ntoskrnl.exe, any suggestions would be appreciated.Larry H

A:0x0000001e Stop error, ntoskrnl.exe

here is a cool trickput 0x0000001e into a web search engine and see where it takes you.You will get 65,800 hits of which the first 10 are relevent

http://www.computing.net/answers/windows-2000/0x0000001e-stop-error-ntoskrnlexe/65906.html
Relevancy 58.48%

I have been experiencing this BSOD on a regular basis since 7/25/2013. I tried an older restore point, I ran DriverHub and update all drivers and my Windows Update are all current. Can not solve. Under the BSOD Stop error technical information it references a qwdf64.sys address FFFFF88002D8A69A base at FFFFF88002D87000, FFDB21. I have attached my "grab all" files folder from my SF Diagnostic Tool. Any help to fix this is greatly appreciated.

A:BSOD Random 0x0000001E Stop

Hello tech514. What you have described is true ... the BSOD is caused by Qustodio PassThrough Filter Driver.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1E, {ffffffffc0000005, fffff88003d7269a, 0, 7abba90}

*** WARNING: Unable to verify timestamp for qwdf64.sys
*** ERROR: Module load completed but symbols could not be loaded for qwdf64.sys
Probably caused by : qwdf64.sys ( qwdf64+369a )

Followup: MachineOwner
---------
And the driver is somehow old.

Code:
fffff880`03d6f000 fffff880`03d7b000 qwdf64 T (no symbols)
Loaded symbol image file: qwdf64.sys
Image path: \??\C:\Windows\system32\Drivers\qwdf64.sys
Image name: qwdf64.sys
Timestamp: Fri Jul 13 13:54:01 2012 (4FFFDB21)
CheckSum: 00010A7C
ImageSize: 0000C000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Update it from Qustodio Download

Free up the startup. Windows does not need any other program to auto start with it, but the auto start programs often conflicts and causes various problems including BSODs.
Click on the Start button
Type ?msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the ?Startup? tab.
Deselect all items other than the antivirus.
Apply > OK
Accept then restart.
Let us know the situation after doing those changes.

http://www.sevenforums.com/bsod-help-support/301268-bsod-random-0x0000001e-stop.html
Relevancy 58.48%

Hello everyone since December I have had BSOD they have not all been the same though I fixed the problems for the first few BSOD STOP: 0x00000101 0x0000001E & BSOD BSOD STOP: 0x00000101 & 0x0000001E I was getting and everything was fine up BSOD STOP: 0x00000101 & 0x0000001E until last week I have started getting them again Here is a Picture of the two BSOD BSOD STOP x http i imgur com rjmug w jpg BSOD STOP x E BSOD STOP: 0x00000101 & 0x0000001E http i imgur com IZh AMQ jpg I have tried everything I can think of I have fully uninstalled all my Nvidia drivers and removed the files left over manually I have cleaned by computer case checked the fans put new heat gel on my CPU tried back dated graphics cards drivers and even beta drivers reinstalling windows Memtest Furmark CPU stress test My CPU's average temperature is around C I have reinstalled all the software for all my USB devices searched for updates for windows rest my BIOS to default I have even read through posts of this site for this kinda BSOD and nothing has helped me Im pulling my hair out here I need my PC for work and I really need help If you guys need the notepad file from the blue screens I'm not sure where to find them on my PC so if you guys could let me know ill post it on here Also my Computer Specs Windows Ultimate SP -bit ASUS Nvidia GeForce GTX AMD Phenom II x Processor GB RAM ASUS motherboard m n t-m Thank you

A:BSOD STOP: 0x00000101 & 0x0000001E

We really need the full reports. Please upload them and we will provide our analysis and troubleshooting steps.http://www.techsupportforum.com/foru...ta-452654.html

-----

http://www.techsupportforum.com/forums/f299/bsod-stop-0x00000101-and-0x0000001e-685083.html
Relevancy 58.48%

Same prob as previous post now stop Windows Cannot start XP 0x0000001E expired I am having the same message and issue as another person Cannot start Windows XP stop 0x0000001E who posted here but the answer has expired He stated A Cannot start Windows XP stop 0x0000001E problem has been detected and windows has been shut down to prevent damage Cannot start Windows XP stop 0x0000001E to you computer If this it the first time you ve seen this Stop error screen restart your computer If this screen appears again follow these steps Check to be sure you have adequate disk space If a driver is identified in the Stop message disable the driver or check with the manufacturer for driver updates Try changing video adapters Check with your hardware vendor for any BIOS updates Disable BIOS memory options such as caching or shadowing If you need to use safe mode to remove or disable components restart your computer press F to select Advance Startup Options and then select safe mode I did this it did nothing If I select safe mode it seems to print a bunch of code on the screen and lockup Technical Information STOP x E xc xBF x x E F win k sys- Adress BF base at BF DateStamp b de I would also like to mention that I m unable to enter safe mode for it crashes everytime I attemp this Make hp Running on a xp media center edittion Processor Athlon X GHz Memory Ram Hard drive GB SATA rpm This is the only information I have I do hope anyone will be able to assist in some way O O nbsp

A:Cannot start Windows XP stop 0x0000001E

What is the Model number of the Pc - there may be an inbuilt diagnostics tool?
Do you have the install Cd?

How Do I Find My Model Number or Product Number? | HP® Support
http://h10025.www1.hp.com/ewfrf/wc/...findModel&cc=us&dlc=en&docname=bph07555&lc=en
 

https://forums.techguy.org/threads/cannot-start-windows-xp-stop-0x0000001e.1093880/
Relevancy 58.48%

Hello everyone, Im hoping someone can help!

My laptop has been crashing and going to BSOD roughly every 2 days. Yesterday however some of my keyboard keys stopped working and now every time I try and boot the laptop I get the BSOD. Ive tried booting in safe mode etc etc and it still goes to BSOD, Ive tried system repair and again just BSOD I even changed the hard drive and tried to reinstall windows but it just kept BSODing. I cant post any information about the laptop as I cant get on to do any of this! All I know is the latest error is this:

*** STOP: 0x0000001e (0xffffffffc0000005, 0xfffff8000c0e0565, 0x00000000000000000, 0xffffffffffffffff)

Sorry its not much to go by but thanks for reading!

A:Constant BSOD STOP: 0X0000001E

Just managed to get in for a brief moment and it says it needed to check the disk for errors but couldnt do it as the disk was been used so it scheduked it fir next boot, rebooted it went on the the chkdisk page and instantly said it had been cancelled so cant even check the disk. Ive also noticed that each blue screen is a different error number and name but it doesnt last long enough for me to take not of them. Also my clock and date is saying its the year 2909!!

http://www.sevenforums.com/bsod-help-support/253043-constant-bsod-stop-0x0000001e.html
Relevancy 58.48%

Working on a Friends Computer who have been getting this error message with every boot into the OS, (although it boots into the Desktop, Win 7 Home, then BSOD)

Safe Mode works Fine, there seems to be no spyware/virus issues, and hardware checks outs

System is a DELL Inspiron 620s

Attached is the Dump file

Thanks in Advance for the Assist

Jose Torres

A:BSOD Stop: 0x0000001E on ntoskrnl.exe

Hi,


Code:

*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 1E, {ffffffffc0000005, fffffa80084e1610, 0, 7fffffa8000}
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+4987d )
Followup: MachineOwner
STOP 0x0000001E: KMODE_EXCEPTION_NOT_HANDLED
Usual causes: Device driver, hardware, System service, compatibility, Remote control programs, memory, BIOS

I would suggest removing Mcafee as it may be causing issues:
How to uninstall or reinstall supported McAfee products using the Consumer Products Removal tool (MCPR)

As an alternative, please download and install:

Microsoft Security Essentials.
Recommended from a strict BSOD perspective, compatibility & stability
compared to other antiviruses/internet security software.



   Note
Once downloaded, update and run a full system scan


Then check to see if your issue still exists?

What hardware have you tested?

cheers

Dave

http://www.sevenforums.com/bsod-help-support/301970-bsod-stop-0x0000001e-ntoskrnl-exe.html
Relevancy 58.48%

Hello, a friend is having crashes after roughly 30-45min. Whether it is sitting idle or under load from games. The old video card failed about a week ago and replaced it with a different and more recent model.
Drivers were uninstalled and the card removed before installing the new card and drivers.
The problem only began after the new video card was installed.
The upgrade was from a GTX 690 to GTX 1080.

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.4
Locale ID: 1033

Additional information about the problem:
BCCode: 1e
BCP1: 0000000000000000
BCP2: 0000000000000000
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\071316-69623-01.dmp
C:\Users\Lethal\AppData\Local\Temp\WER-145580-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

A:BSOD stop: 0X0000001E 0x0000000000000000 after new GPU

Please remove all pirated programs and such from your system before we can start troubleshooting.
The Forum rules is meant for everything regarding piracyDiscussing it,
Asking for guidance,
Asking for a crack,
The use of it,
Etc.





Quote:
4) No piracy or discussion of piracy allowed at all. Such as software, music, videos and other intellectual property violations (e.g. downloading youtube videos locally etc).

http://www.sevenforums.com/bsod-help-support/398488-bsod-stop-0x0000001e-0x0000000000000000-after-new-gpu.html
Relevancy 58.48%

My computer overall has been so weird lately

1. It started to reset instead of shutting off for a while.
2. Then it did not wanna turn back on after it went to hibernate, it turned on and it turned off right away, it restarted till i held down the power button. I disabled hibernate
3. At one point the folders took a while to load, and when they did it would only show the thumbnail for a bit o sometimes no thumbnail it was weird.
4. Now finally i got a BSOD, I'm in safemode right now.

What could be the problem? i am completely lost here. I'm about to do a clean install of windows 7 but i have so much stuff i do not really wanna lose.

also all this has been happening in the course of around a month.

A:BSOD a little bit after start up. STOP: 0X0000001E

Daemon Tools/Alcohol %

dtsoftbus01.sys Fri Jan 13 19:45:46 2012 (4F10358A)
Daemon Tools driver [br] Possible BSOD issues in Win7
http://www.carrona.org/drivers/driver.php?id=dtsoftbus01.sys

Daemon Tools (and Alcohol % software) are known to cause BSOD's on some Win7 systems (mostly due to the sptd.sys driver, although we have seen dtsoftbus01.sys blamed on several occasions). Please uninstall the program, then use the following free tool to ensure that the troublesome sptd.sys driver is removed from your system (pick the 32 or 64 bit system depending on your system's configuration): DuplexSecure - FAQ

As an alternative, many people recommend the use of Total Mounter or Magic ISO

AppleCharger.sys is a known cause of blue screens. Recommend to uninstall completely with Revo Uninstaller.

AppleCharger.sys Wed Nov 2 08:46:00 2011 (4EB0AEE8)
GIGABYTE On/Off Charge driver. See here for details - GIGABYTE ON/OFF Charge [br] May cause BSOD on Win7/8 systems - uninstall to test (haven't seen recently (15Jan2013))
http://www.carrona.org/drivers/driver.php?id=AppleCharger.sys



   Tip
Revo Uninstaller

Download and install Revo Uninstaller free from here: Download Revo Uninstaller Freeware - Free and Full Download - Uninstall software, remove programs, solve uninstall problems

Opt for "Advanced Mode" and uninstall the software (also delete the leftover registry entries).

Memtest86+

Run Memtest86+ for at least 8-10 passes. It may take up to 20 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold. How to Test and Diagnose RAM Issues with Memtest86+



   Note
Pay close attention to part 3 of the tutorial in order to rule the faulty RAM stick out.



   Tip
Do this test overnight.

Please run these tests and report back the results

1. SFC /scannow to check windows for corruption - SFC /SCANNOW Command - System File Checker
2. Disk check for errors on the hard drive - How to Run Disk Check in Windows 7
3. Troubleshoot applications by a clean boot - Troubleshoot Application Conflicts by Performing a Clean Startup
4. Memtest86+ paying close attention to part 3 - RAM - Test with Memtest86+
5. Hard drive test from HDD mfg website - Hard Drive Diagnostic Procedure

BSOD BUGCHECK SUMMARY

Code:

Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
Debug session time: Sun May 12 08:12:57.477 2013 (UTC + 6:00)
System Uptime: 0 days 0:16:57.710
BugCheck 1E, {ffffffffc0000005, fffffa800c58c3ef, 0, 7efa003c}
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+487ed )
BUGCHECK_STR: 0x1E_c0000005_R
PROCESS_NAME: chrome.exe
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
Debug session time: Sun May 12 07:53:17.549 2013 (UTC + 6:00)
System Uptime: 0 days 0:05:01.782
BugCheck 1E, {ffffffffc0000005, fffffa800c585610, 0, 7fffffa8000}
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+487ed )
BUGCHECK_STR: 0x1E_c0000005_R
PROCESS_NAME: SearchIndexer.
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
Debug session time: Sun May 12 07:47:15.179 2013 (UTC + 6:00)
System Uptime: 0 days 0:05:42.412
BugCheck 1E, {ffffffffc0000005, fffffa800c6183ef, 0, 7fffffa003c}
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+487ed )
BUGCHECK_STR: 0x1E_c0000005_R
PROCESS_NAME: svchost.exe
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
Debug session time: Sun May 12 07:24:12.215 2013 (UTC + 6:00)
System Uptime: 0 days 0:05:23.074
BugCheck ... Read more

http://www.sevenforums.com/bsod-help-support/289647-bsod-little-bit-after-start-up-stop-0x0000001e.html
Relevancy 58.48%

Hi all Well last month i had to have a new motherboard fitted to my yr old Window Home Essentials bit pc which i thought weird given how quot new quot it is Anyway when i got the pc back the hdmi sound settings in playback had gone so i took it - Windows BSOD 0x0000001E stop: 7 - back to the shop again where they said they had quot fixed quot it but they hadnt All they did was remove my avg amp spybot search BSOD - stop: 0x0000001E - Windows 7 and destroy and replace it with windows home essentials amp they updated Explorer to which i hate amp swiftly reverted BSOD - stop: 0x0000001E - Windows 7 back to I can watch films amp the kids can play games in HDMI BUT we cant listen to sounds via the monitor or tv as we previously could sound settings - playback devices only showing our speakers now no spfdi or whatever its called lol or hdmi device i thought i could live without this so just left it However over the past wks i have been getting more and more BSOD's this only ever happened once before then the new m b BSOD - stop: 0x0000001E - Windows 7 got fitted and im constantly getting the stop error x E followed by other numbers all 's Thursday night i had BSOD's within a matter of mins So i left the pc alone till the next day y'day Y'day I did a search on this forum and some one had a similar problem and they were advised it had something to do with Windows Home Essentials I unistalled and reinstalled both java and flash but the problem persisted so i disabled W H E and the problem seemed to have disappeared wooohooo all day with no problems kids played their games i browsed net etc until last night when i got a BSOD again amp again upon start up this morning when i initially came onto the forum so no video was playing but im assuming flash java would be needed somewhere so now im at a loss As W H E still not running as far as im aware amp i have updated flash etc all drivers etc are showing as up to date but the only other thing i can surmise is maybe its my graphics card which worked fine before but now has no hdmi sound settings The shop i got it repaired at said the motherboard was a like for like one but im beginning to wonder now It cost me a pretty penny so dont want to fork out more cash moreso if its the fault of the shop i got it quot fixed quot at lol any help in my ramblings would be greatly appreciated have attached a minidump zip amp attached pc spec info that i got from HWiNFO if that helps

A:BSOD - stop: 0x0000001E - Windows 7

Your crash dumps are not showing any finite probable cause. In such a situation, it is better to enable Driver Verifier to monitor the drivers.

Driver Verifier - Enable and Disable

Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

Let us know the results, with the subsequent crash dumps, if any.

http://www.sevenforums.com/bsod-help-support/256884-bsod-stop-0x0000001e-windows-7-a.html
Relevancy 58.48%

Hello, I have been having a bsod every few days and its been really frustrating. i was hoping to get some help. dmp files are attached. this computer was running fine for the several months since i put it together and suddenly this starts happening. Im running windows 7 home premium.

Relevancy 57.62%

I m using win Been fine for years no BSoD s at all My niece was on my computer looking at someone s myspace and then it shut down and when it rebooted I got this fine message NOT 0x0000001E EXCEPTION KMODE STOP: HANDLED Stop x E xC x DB C E x x KMODE EXCEPTION COULD NOT BE HANDLED sometimes after a reboot it has the E then x D xEB B E x DB C E xC I went into safemode and did a search for all files modified around the time she was on it There was some spyware which I deleted after running Hijackthis I have reduced the amount of virtual memory as well Unfortunately my virus program will not run during safemode so I don t know if there s a virus hijackthis would notice STOP: 0x0000001E KMODE EXCEPTION NOT HANDLED it right I have no idea what all the numbers in the error refer to If anyone does that could help me in fixing this and finding out what hardware or driver went haywire Can this just happen all of the sudden like this I have not installed any new hardware or programs for awhile either Please help thanks Jeff nbsp

Relevancy 57.62%

after i moved i booted up my pc and it ran just fine for about 20s then bsod, tried system repair with the windows 7 disc but it says there is no problem, did chkdsk same thing no problem,

A:BSOD20s after windows boots up stop 0x0000001e

Welcome to SevenForums.

Perform a clean boot:Troubleshoot Application Conflicts by Performing a Clean Startup
Please follow http://www.sevenforums.com/crashes-d...tructions.html to upload all the files.

http://www.sevenforums.com/bsod-help-support/265213-bsod20s-after-windows-boots-up-stop-0x0000001e.html
Relevancy 57.62%

I've been getting the BSOD about 2 minutes after startup. During those 2 minutes, I won't be able to open anything and many of my background apps crash. I managed to reach Safe Mode and looking for help now.

A:BSOD 2 minutes after startup STOP: 0x0000001E

  
Quote: Originally Posted by Massaddict


I've been getting the BSOD about 2 minutes after startup. During those 2 minutes, I won't be able to open anything and many of my background apps crash. I managed to reach Safe Mode and looking for help now.


Hello there!

Seems like the dump files are very vague not specific cause I can spot. Since Safe Mode is working fine it might be some program in startup or a driver that's not loading in Normal mode.

Enable Driver Verifier Using Driver Verifier to identify issues with Drivers and post us with the updated dump files.

Run SFC Scan SFC /SCANNOW Command - System File Checker

BSOD BUGCHECK SUMMARY


Code:

Loading Dump File [C:\Documents and Settings\Shyam\_jcgriff2_\dbug\__Kernel__\072812-24632-01.dmp]
Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
Debug session time: Sun Jul 29 10:35:40.431 2012 (GMT+5)
System Uptime: 0 days 0:16:37.633
BugCheck 50, {fffff682ff802070, 0, fffff80002f48160, 5}
Probably caused by : memory_corruption ( nt!MiTrimWorkingSet+c0 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x50
PROCESS_NAME: CCC.exe
FAILURE_BUCKET_ID: X64_0x50_nt!MiTrimWorkingSet+c0
Bugcheck code 00000050
Arguments fffff682`ff802070 00000000`00000000 fffff800`02f48160 00000000`00000005
??????????????????????????????????????????????????????????????????????????????????????``
Loading Dump File [C:\Documents and Settings\Shyam\_jcgriff2_\dbug\__Kernel__\072912-40435-01.dmp]
Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
Debug session time: Mon Jul 30 01:40:04.435 2012 (GMT+5)
System Uptime: 0 days 0:02:03.637
BugCheck 50, {fffff88008a1c3c0, 1, fffff80002edb0ee, 0}
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : ntkrnlmp.exe ( nt!ExAcquireResourceSharedLite+4e )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x50
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0x50_nt!ExAcquireResourceSharedLite+4e
Bugcheck code 00000050
Arguments fffff880`08a1c3c0 00000000`00000001 fffff800`02edb0ee 00000000`00000000
??????????????????????????????????????????????????????????????????????????????????????``

http://www.sevenforums.com/bsod-help-support/243492-bsod-2-minutes-after-startup-stop-0x0000001e.html
Relevancy 57.62%

I have an issue where my laptop crashes at varying times, but like at least once per half hour and sometimes a startup for 6 or 8 starts in a row. The BSOD usually says IRQL_NOT_LESS_OR_EQUAL, but sometimes is missing any explanation in that place on the screen The STOP codes are either 0x0000001E or 0x0000000a and there are various parameters following usually including 0x0000000000000000 and ox0000000000000001 or 2 or Z .

My operating system is Windows 7 Home Premium,

I have run malware bytes and a couple other similar tools, disabled and tried to uninstall macafee programs, and I've run windows memory diagnostic tool (extended) at 10 passes, with no irregularities found.

I have run both the debug tol and the diagnostic tool and uploaded results from both.

Please help!
Thank you...

A:BSOD with STOP codes either 0x0000001E or 0x0000000a

Code:
Auslogics BoostSpeed BoostSpeed "c:\program files (x86)\auslogics\boostspeed\boostspeed.exe" -usetray helen-HP\helen Startup
Auslogics Browser Care Browser Care "c:\program files (x86)\auslogics\browser care\browsercare.exe" -usetray helen-HP\helen Startup
Uninstall these 2 applications from Control Panel

then....


Code:
fffff880`0a0b70d8 fffff880`01060106Unable to load image \SystemRoot\system32\DRIVERS\iaStor.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for iaStor.sys
*** ERROR: Module load completed but symbols could not be loaded for iaStor.sys
iaStor+0x39106
Uninstall all Intel Rapid Storage Technology applications from Control Panel and reboot the system

Now you need to completely update Windows 7.


Code:
Host Name: HELEN-HP
OS Name: Microsoft Windows 7 Home Premium
OS Version: 6.1.7600 N/A Build 7600

http://www.sevenforums.com/bsod-help-support/319742-bsod-stop-codes-either-0x0000001e-0x0000000a.html
Relevancy 57.62%

Hi all

1st time poster, recent BSOD sufferer. Zip file attached. This has been happening for maybe a week, not sure. Only change to anything I'm aware of was updating my McAfee subscription from a CD. I'm also running composing software called Finale 2010 and it chugs to a halt and crashes. It's not exclusive to that, it just did it on the desktop yesterday with nothing running.

Thanks for your help!

A:Daily BSODs in last week or so - STOP:0x0000001E

Welcome.

McAfee is known to cause BSOD's. Please remove it for testing purpose.

Code:
Start Menu\Programs\McAfee Public:Start Menu\Programs\McAfee Public
Revo Uninstaller:

Use Revo Uninstaller to uninstall stubborn software.

Download and install the software
Opt for Advance Mode while uninstalling which allows you to remove leftover registry.
Download Revo Uninstaller Freeware - Free and Full Download - Uninstall software, remove programs, solve uninstall problems

Microsoft Security Essentials is recommended from a strict BSOD perspective, compatibility & stability compared to other internet security software. Malwarebytes is a great combo to MSE. They are free and lightweight.

Also uninstall your existing Antivirus software before you install MSE.

Good and Free system security combination.



   Warning
Do not start the free trial of Malware Bytes; remember to deselect that option when prompted.




 Clean bootTroubleshoot Application Conflicts by Performing a Clean Startup
Reduce items at start-up. No software except anti-virus is required plus doing this improves the time for logging into windows:How to Change, Add, or Remove Startup Programs in Windows 7
Run the System File Checker that scans the of all protected Windows 7 system files and replaces incorrect corrupted, changed/modified, or damaged versions with the correct versions if possible:Click on the
Type CMD on Search
Left click and Run as Administrator
Type SFC /scannow
Full tutorial here:SFC /SCANNOW Command - System File Checker

Code:
Microsoft (R) Windows Debugger Version 6.3.9600.16384 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\YUSSI\Downloads\Compressed\IAIN-PC-24_03_2015_210604_52\032415-5647-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available


************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.18741.amd64fre.win7sp1_gdr.150202-1526
Machine Name:
Kernel base = 0xfffff800`0284c000 PsLoadedModuleList = 0xfffff800`02a90890
Debug session time: Wed Mar 25 02:54:13.263 2015 (UTC + 6:00)
System Uptime: 0 days 3:15:41.153
Loading Kernel Symbols
.

Press ctrl-c (cdb, kd, ntsd) or ctrl-break (windbg) to abort symbol loads that take too long.
Run !sym noisy before .reload to track down problems loading symbols.

..............................................................
................................................................
.....................................
Loading User Symbols
Loading unloaded module list
.................................................
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1E, {ffffffffc0000005, fffff880036ad360, 1, 971}

*** WARNING: Unable to verify timestamp for RapportCerberus64_80128.sys
*** ERROR: Module load completed but symbols could not be loaded for RapportCerberus64_80128.sys
Probably caused by : RapportCerberus64_80128.sys ( RapportCerberus64_80128+80360 )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* ... Read more

http://www.sevenforums.com/bsod-help-support/365161-daily-bsods-last-week-so-stop-0x0000001e.html
Relevancy 57.62%

Can you help me please? Same error, my graphic card is G-force 330M,
this problem mainly occurs when I play games.
thank you for help
 

A:Blue screen of death ***STOP: 0x0000001e***

This is a problem with your Nvidia video card or its driver. Go here and see if a newer driver is available for download:
http://www.geforce.com/drivers
 

http://www.techspot.com/community/topics/blue-screen-of-death-stop-0x0000001e.212534/
Relevancy 57.62%

Hello to anyone nvlddmkm.sys, 0x0000001E dxgmms1.sys STOP: BSOD's, and and everyone I've been having multiple BSOD's usually being nvlddmkm sys BSOD's, nvlddmkm.sys, dxgmms1.sys and STOP: 0x0000001E which I thought I solved when I re-installed my NVidia drivers I also tried downgrading to the and even upgrading to the revision drivers After that the errors came back but BSOD's, nvlddmkm.sys, dxgmms1.sys and STOP: 0x0000001E much less frequent I am still having these BSOD's unfortunately though Very rarely when I'm watching videos They become more frequent it seems as I start to do play more demanding things Such as if I play Minecraft I can play it sometimes for hours straight before getting a BSOD sometimes it might be - hours though But if I play something such as Perfect World International or Skyrim etc I get a BSOD sometimes after - hours of game play sometimes even less mins-an hour I have checked almost everything I can think of and can't figure it out I did a mem test on each RAM stick over nights each coming out error free My CPU temps stay at about c- c c when gaming Same with my Video card temps ---------------- My computer specs are - Windows Ultimate x bit Full retail - AMD Sempron GHz - NVidia GeForce GT GB PCI Express video card - On board RealTek AC' Audio - Two GB RAM sticks GBs in total - GB IDE HDD ---------------- Any help would very appreciated as we all know how terrible BSOD's can be Thanks to anyone who helps out Also if there is more info needed I will provide it just tell me what it is you need

A:BSOD's, nvlddmkm.sys, dxgmms1.sys and STOP: 0x0000001E

Test your Graphics Card
NVIDIA/AMD Video Card - Test with OCCT

http://www.sevenforums.com/bsod-help-support/204367-bsods-nvlddmkm-sys-dxgmms1-sys-stop-0x0000001e.html
Relevancy 57.62%

Hello, I was working on a computer I am refurbishing and most of its problems were worked out (all software; reinstalling Windows and drivers), but when test-running it today, after running for a few hours, I went to check on it and (I think it woke from sleep) then it blue-screened. It had no label, just the stop code 0x0000001E (and then in parenthesis a few, I think 4, 0x00000000). I don't really know what it means, but I have not yet updated the BIOS (updates are avaliable) so I don't know if that would help. Thanks for any help. (Required ZIP attached).
EDIT: The BSOD doesn't list a specific reason. It displays: 0x0000001e (0x0000000, 0x0000000, 0x0000000, 0x0000000).

A:Random BSOD, stop code 0x0000001E

Monitor hardware temperature with system monitoring software like Speccy or HWMonitor:
Piriform - Speccy

CPUID - HWMonitor For how to upload a screenshot or file, read here

Test and Diagnose RAM Issues with Memtest86+:RAM - Test with Memtest86+ Pay close attention to part 3 of the tutorial "If you have errors"


   Tip
Test the RAM with Memtest86+ for at least 7-10 passes. It may take up to 22 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold.

http://www.sevenforums.com/bsod-help-support/297960-random-bsod-stop-code-0x0000001e.html
Relevancy 57.62%

So basically my computer has been crashing a lot lately and I can't figure out if a driver is causing the problem or do I have some faulty software. If anyone can look through my minidump file and see if they can find the problem that would be greatly appreciated.
 

A:Blue screen of death STOP: 0x0000001e

*Update*
Motherboard: Gigabyte Technology Co., Ltd. Z97X-Gaming 5
CPU: intel Core i5 4690K @ 3.50GHz
PW: EVGA SuperNOVA NEX 650W 80+ Gold Certified Fully-Modular ATX Power Supply
RAM: Patriot Viper 3 Low Profile Red 8GB (2 x 4GB) DDR3-1866 Memory
Video Card: Asus GeForce GTX 970 4GB STRIX Video Card

Also I forgot to Zip all the files so here they are.
 

http://www.techspot.com/community/topics/blue-screen-of-death-stop-0x0000001e.215896/
Relevancy 57.62%

Hi Seven Forums! I've been recently getting the BSOD when I open almost any program, when I try to open it my display stops and I get the BSOD error STOP: 0x0000001E. The latest thing I would have downloaded with suspicion would be a game torrent. I've gotten a BSOD error STOP: 0x00000050 and error STOP: 0x0000001a, but mainly error STOP: 0x0000001E. I'm thinking that my RAM is corrupted, I've been searching all night for help and looks like its a memory problem. I'm currently in Safe Mode with Networking. Anyways, sorry for using Winrar, I didn't have 7-ZIP installed.

A:BSOD opening almost anything. STOP: Error 0x0000001E

Hello,


Code:
avast! Network Shield Support ROOT\LEGACY_ASWTDI\0000 This device is not present, is not working properly, or does not have all its drivers installed.
Seems Avast might be installed incorrectly. I recommend uninstalling Avast, and use Microsoft Security Essentials - Free Antivirus for Windows . Just for troubleshooting.

Just for safe measures please run a RAM - Test with Memtest86+

Post back results.

-Justin

http://www.sevenforums.com/bsod-help-support/243642-bsod-opening-almost-anything-stop-error-0x0000001e.html
Relevancy 57.62%

Hi, according to the guidelines, I'm starting a thread here with my problems.

I keep getting this "STOP 0x0000001E" error on my computer, with no apparent cause. The closest my own troubleshooting has gotten me is to identify a missing driver, or outdated driver. However, upon checking my "Device Manager," everything appears to be up-to-date.

My system information:
DELL Studio XPS Laptop 1640
OS: Windows 7 Home Premium (64-bit)
Processor: Intel(R) Core(TM)2 Duo CPU T9550 @ 2.66GHz 2.67GHz

As per the "BSOD Posting Instructions," I've attached my "Systems Diagnostic Report" and the "BSOD Dump & System File Collection Report" as a single .zip file to this post. Please let me know here if any other information from me is required.

Much thanks.
[EDIT] Whoops, my genius self has forgotten to attach the files. >>

A:BSOD: STOP error 0x0000001E (New hardware?)

Perfmon shows issues with your Microsoft Security Essentials software. Please do the following:
- download a fresh copy of the Security Essentials software
- uninstall the current software
- install the fresh copy of the Security Essentials software

MSINFO32 shows:
approximately 97 STOP 0x1E errors blaming the kernel (core of the OS)
5 STOP 0x76 blaming iexplore.exe (unusual)
10 STOP 0x9F blaming USBSTOR (dump files may reveal another driver)

Only 2 dump files were in the upload (5 and 6 Jan 2012) - both were STOP 0x1E
These each blame the kernel (core of the OS) and are memory access errors (c0000005)

Right now I suspect the drivers for your Ricoh memory card reader - as they date from 2006.
Please update them from the PC Manufacturer's website immediately
Then monitor for further BSOD's

If the BSOD's continue, please post back and we'll try Driver Verifier on all 3rd party drivers.

BSOD BUGCHECK SUMMARY

Code:

Loading Dump File [C:\Users\FUBAR\_jcgriff2_\dbug\__Kernel__\010612-14430-01.dmp]
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Fri Jan 6 05:42:32.664 2012 (UTC - 5:00)
System Uptime: 0 days 0:38:16.272
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+4977d )
BUGCHECK_STR: 0x1E_c0000005
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: firefox.exe
FAILURE_BUCKET_ID: X64_0x1E_c0000005_nt!_??_::FNODOBFM::_string_+4977d
Bugcheck code 0000001E
Arguments ffffffff`c0000005 fffffa80`064bb7a7 00000000`00000000 00000000`76f50000
BiosVersion = A15
BiosReleaseDate = 04/09/2011
CPUID: "Intel(R) Core(TM)2 Duo CPU T9550 @ 2.66GHz"
MaxSpeed: 2660
CurrentSpeed: 2660
??????????????????????????????????????????????????????????????????????????????????????``
Loading Dump File [C:\Users\FUBAR\_jcgriff2_\dbug\__Kernel__\010512-20935-01.dmp]
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Thu Jan 5 15:12:00.378 2012 (UTC - 5:00)
System Uptime: 0 days 10:35:58.376
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+4977d )
BUGCHECK_STR: 0x1E_c0000005
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: chrome.exe
FAILURE_BUCKET_ID: X64_0x1E_c0000005_nt!_??_::FNODOBFM::_string_+4977d
Bugcheck code 0000001E
Arguments ffffffff`c0000005 fffffa80`064b77a7 00000000`00000000 00000000`76d60000
BiosVersion = A15
BiosReleaseDate = 04/09/2011
CPUID: "Intel(R) Core(TM)2 Duo CPU T9550 @ 2.66GHz"
MaxSpeed: 2660
CurrentSpeed: 2660
??????????????????????????????????????????????????????????????????????????????????????``

http://www.sevenforums.com/bsod-help-support/206663-bsod-stop-error-0x0000001e-new-hardware.html
Relevancy 57.62%

All,

New the the forums, but frustrated and though maybe somebody could help me out. I get this random stop error (above) randomly when playing MMORPGs. I have tried a fresh install of Win7 Home Premium x64, but the error persists. I have tried to flash the BIOS, but get errors erasing blocks in the flash. Perhaps someone can help guide me. I do not want to shotgun hardware, but at this point, I am willing to try just about anything.

A:BSOD and Stop Error 0x0000001E - Sporadic

Hello sluggo97.

Avast is causing some problems there.

Code:
fffff880`055487d8 fffff880`03f05905Unable to load image \??\C:\Windows\system32\drivers\aswMonFlt.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for aswMonFlt.sys
*** ERROR: Module load completed but symbols could not be loaded for aswMonFlt.sys
aswMonFlt+0x21905
Description here: http://www.carrona.org/drivers/drive...=aswMonFlt.sys

Uninstall Avast using Avast Uninstall Utility. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.
Download, install and update those, and then run full system scans with both of them, one by one.

You have reasons to do some more extensive system scan.

Code:
fffff880`05548ef8 fffff880`010f9000 ataport!ChannelSyncAcpiEvalMethod <PERF> (ataport+0x0)
fffff880`05548f00 fffff880`01110930 ataport!__PchSym_ <PERF> (ataport+0x17930)
fffff880`05548f08 fffff880`010f9000 ataport!ChannelSyncAcpiEvalMethod <PERF> (ataport+0x0)
fffff880`05548f10 fffff880`01110924 ataport!__PchSym_ <PERF> (ataport+0x17924)
fffff880`05548f18 fffff880`010f9000 ataport!ChannelSyncAcpiEvalMethod <PERF> (ataport+0x0)
fffff880`05548f20 fffff880`01110840 ataport!__PchSym_ <PERF> (ataport+0x17840)
fffff880`05548f28 fffff880`010f9000 ataport!ChannelSyncAcpiEvalMethod <PERF> (ataport+0x0)
fffff880`05548f30 fffff880`01110834 ataport!__PchSym_ <PERF> (ataport+0x17834)
fffff880`05548f38 fffff880`010f9000 ataport!ChannelSyncAcpiEvalMethod <PERF> (ataport+0x0)
fffff880`05548f40 fffff880`01110918 ataport!__PchSym_ <PERF> (ataport+0x17918)
fffff880`05548f48 fffff880`010f9000 ataport!ChannelSyncAcpiEvalMethod <PERF> (ataport+0x0)
fffff880`05548f50 fffff880`01110618 ataport!__PchSym_ <PERF> (ataport+0x17618)
Scan the system for possible virus infection with the following programs, too.
Anti-rootkit utility TDSSKiller
Windows Defender Offline
And the display driver is causing some issues there, too.


Code:
BugCheck D1, {0, 2, 1, fffff8800446d1c1}

*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : dxgmms1.sys ( dxgmms1!VidSchiCompleteSignalCommmand+151 )

Followup: MachineOwner
---------
I would suggest you to do a clean install of the display driver, using the 314.22 WHQL driver.
Uninstall All nvidia items in Control Panel > Programs and features3D Vision Control Driver
3D Vision Driver
Graphics Driver
HD Audio Driver
PhysX
nvidia Update
(Are you using nvidia chipset drivers? If so, dont uninstall anything other than those are listed).
Now follow Drivers - Clean Left over Files after Uninstalling
Boot normally now. Go to Drivers - Download NVIDIA Drivers, Download 314.22 WHQL. While installing, Select Custom (Advanced) install. In the next page, follow this settings:
The Logitech Webcam.

Code:
BugCheck 50, {fffff87f859e0eac, 0, fffff88004480fdc, 5}

*** WARNING: Unable to verify timestamp for lvuvc64.sys
*** ERROR: Module load completed but symbols could not be loaded for lvuvc64.sys

Could not read faulting driver name
Probably caused by : ks.sys ( ks!KsStreamPointerAdvance+0 )

Followup: MachineOwner
---------
Search for driver updates in Logitech Support - Downloads, Manuals, FAQs & More . If not found, disable the webcam.

Free up the startup. Windows does not need any other program to auto start with it, but the auto start programs often conflicts and causes various problems including BSODs.
Click on the Start button
Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the “Startup” tab.
Deselect all items other than the antivirus.
Apply > OK
Accept then restart.
Let us know the results.
________________________________________________________________________________
BSOD ANAL... Read more

http://www.sevenforums.com/bsod-help-support/299523-bsod-stop-error-0x0000001e-sporadic.html
Relevancy 57.62%

Really need your help.

My HP laptop keep crashing and we get the blue screen whenever we log on in Administrator accounts. When I log on as Guest it doesn't crash. The BSOD starting happening after one of my friends used my browser.

I've attached the SevenForums zip file

Thank You!

A:BSOD when logged on as Administrator, STOP: 0x0000001E

What did your friend do? What websites did he visit? Did he download anything?

Can you boot into safe mode as an administrator? If so, I would create a new account with administrator rights, then log in as the new administrator to see if the BSODs continue. I would also do a complete virus scan while in safe mode, because my first thought is that your friend got your system infected.

http://www.sevenforums.com/bsod-help-support/245066-bsod-when-logged-administrator-stop-0x0000001e.html
Relevancy 57.62%

So I bought a new computer for my sister-in-law from newegg (and built it)

She has been getting a few random BSODs, I tried doing a fresh install of windows, her programs and drivers. She claims it only happens once a week, but is scared she will lose work as she uses this computer for her business.

System is running Windows 7 Pro x64 retail
everything is brand new

system specs:
Mobo - gigabyte 880GM-USB3
Proccesor - AMD Phenom II x6 1055T (2.8GHz)
Ram - Gskil DDR3-1333 8GB
Video - Saphire Radion HD5450

A:Random BSOD occasionally stop: 0x0000001E

  
Quote: Originally Posted by bitzdv


So I bought a new computer for my sister-in-law from newegg (and built it)

She has been getting a few random BSODs, I tried doing a fresh install of windows, her programs and drivers. She claims it only happens once a week, but is scared she will lose work as she uses this computer for her business.

System is running Windows 7 Pro x64 retail
everything is brand new

system specs:
Mobo - gigabyte 880GM-USB3
Proccesor - AMD Phenom II x6 1055T (2.8GHz)
Ram - Gskil DDR3-1333 8GB
Video - Saphire Radion HD5450



These crashes were caused by memory corruption. Please run these two tests to verify your memory and find which driver is causing the problem.

If you are overclocking anything reset to default before running these tests.
1-Memtest.





Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.



RAM - Test with Memtest86+

2-Driver verifier






Quote:
I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.


Driver Verifier - Enable and Disable

http://www.sevenforums.com/bsod-help-support/200688-random-bsod-occasionally-stop-0x0000001e.html
Relevancy 57.62%

Well every single night for the past days in between AM and AM my PC has been blue screening Throughout my PC's life it's had some problems blue-screening but I've always been able to fix it Since June when I installed my OS I've had to restore backups at least times and I used to have a ton of problems with Vista refusing to start etc but it always got over it and worked eventually In fact up until now I haven't had a BSOD since Anyway the BSOD cited low disk space as my issue My disk space is that same as it's been for a year and it's not low so that can't be the issue Next I thought about my OCZ Vertex going bad again I'm on my rd one but that can't be the issue since I performed checks on it and all went well additionally every time it died before it would simply lock up the computer not BSOD Anyway this BSOD really worries me because it happens consistently and I haven't been able to reproduce it during the day I've tried MemTest no only 0x0000001E... STOP night... corruption? data at errors Prime for my overclock ran for an hour no errors stable temps as well as STOP 0x0000001E... only at night... data corruption? running my AntiVirus which I thought could be the problem since it runs only at night This BSOD is especially bad for me because it increases the risk of data corruption since of my disks are encrypted the ones with web-server data only of which I have a recent backup of as well as because I'm trying to run a website with a virtual machine Yes my PC stays on - and since June when I built it has run over hours according to HD Tune One thing I did was view the Windows Error Log and one thing I noticed was that it seemed to be having a continuous problem with Windows edb I tried restoring it from a backup AND deleting it neither solved the issue Also in the report I generated just now I noticed some odd things it said my USB drive is unable to start which is incorrect because I'm using it now and it also said it doesn't have a registered anti-virus AVG is running right now and it's never alerted it to me before Like I said my OS has a long history of data corruption and lots of weird problems that usually seem to fix themselves Anyway this BSOD completely baffles me and I would really appreciate some help I have attached a compressed ZIP folder with the data I'm supposed to put here Also my PC was built in June and not until December did I start a web-server yes I went a bit overboard on the specs but I was just coming off a PC with an Athlon and MB of RAM Also I'm just remembering now that a few days before this nightly BSOD started a few odd things happened while I was using the computer First I was just browsing the internet and all of a sudden the computer became deathly slow I looked into Task Manager and it said my RAM usage was at GB and there was over GB on the page file I looked at the processes and explorer exe was taking over GB of RAM That was right after I received some Windows error message sadly I can't remember what it said I shut down my VMWare to clear up GB of RAM and as soon as the RAM usage was down explorer exe immediately grew to fill in the space so I was back to the same situation as before Next I just went and ended the process explorer exe Of course that didn't fare so well so I had to reboot No problems after that However another oddity was that all of a sudden a file called ntuser dat started appearing on my G drive I have no idea why that was there that belongs in the user profiles on the C doesn't it Odd Also just this morning when I rebooted from the blue-screen my custom login screen background had reset to default Clearly something very odd is happening here Also I just ran sfc scannow in the CMD and it said it found some corrupt files but was unable to fix some of them Another neat piece of information is that for some reason my Firefox keeps randomly locking up Do you think this is hardware or software Clealy there's some data corruption going on here SPECS homebuilt June Window... Read more

A:STOP 0x0000001E... only at night... data corruption?

Hi -

There are no BSOD memory dumps in the zipped attachment.

Your page file is on drive u:
OS Drive = c:


Code:
AllocatedBaseSize=6441
Caption=U:\pagefile.sys
CurrentUsage=119
Description=U:\pagefile.sys
InstallDate=20101120175610.396000-300
Name=U:\pagefile.sys
PeakUsage=120
Status=
TempPageFile=FALSE

Caption=u:\ 'pagefile.sys'
Description='pagefile.sys' @ u:\
InitialSize=0
MaximumSize=0
Name=u:\pagefile.sys
SettingID=pagefile.sys @ u:
The page file needs to be on OS drive c: to produce memory dumps.

After page file change . . .

Run Driver Verifier - Driver Verifier - Windows 7 & Vista (BSOD-related)

Driver Verifier needs to run 24 hours minimum or until it BSODs your system, whichever is less. Then . . .

Provide full system info - Blue Screen of Death (BSOD) Posting Instructions - Windows 7 & Vista

Also, run Speccy - Download Speccy 1.11.256 - FileHippo.com
- "File" | "Publish Snapshot" | Paste URL into your next post

Regards. . .

jcgriff2

`

http://www.techsupportforum.com/forums/f299/stop-0x0000001e-only-at-night-data-corruption-594682.html
Relevancy 57.62%

Hi my pc recently started to freeze at random doesn't matter what i'm doing if playing or watching films or even nothing the image on the monitor is blocked mouse and keyboard loose BSOD 0x0000001E stop: freezes and random alimentation while the rest of the pc fans ad cd drives keep working and the hdd led is off all tempereture are low i don't think it's overheating Occasionally it also crash with the BSOD error STOP x E xFFFFFFFFC random freezes and BSOD stop: 0x0000001E xFFFFF A CF x x I tried to change tha ram with new corsair Gb mhz but it froze anway Also i've formatted and reinstalled win on main HD updated the bios downloaded all the drivers for the mainboard from the asus site and the drivers for the video card but didn't helped Another problem but i don't know if it's related is that the pc found a RAID controller and it asks the driver for it but i don't have a RAID controller and i didn't set the hard disk in raid mode in bios also when i download asus drivers for raid controllers i receive this message system does not have requirement for the installation right at of installation Hope i've been clear enough and thank for your help and tell me if i have to give you any other information

A:random freezes and BSOD stop: 0x0000001E

Daemon Tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known BSOD causer. Uninstall Daemon Tools at first. Then download SPTD standalone installer from Disk-Tools.com, and execute the downloaded file as guided below :
Double click to open it.
Click this button only:

If it is grayed out, as in the picture, there is no more SPTD in your system, and you just close the window.
Free up the startup. Windows does not need any other program to auto start with it, but the auto start programs often conflicts and causes various problems including BSODs.
Click on the Start button
Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the “Startup” tab.
Deselect all items other than the antivirus.
Apply > OK
Accept then restart.
The Sonix USB camera driver is very old.

Code:
fffff880`07483000 fffff880`07eec200 snpstd3 (deferred)
Image path: \SystemRoot\system32\DRIVERS\snpstd3.sys
Image name: snpstd3.sys
Timestamp: Fri Jul 03 07:10:16 2009 (4A4D6180)
CheckSum: 00A708DC
ImageSize: 00A69200
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Update it from Sonix Technology Co., Ltd.

And, Disable USB Selective Suspensd too.
USB Selective Suspend - Turn On or Off

For the USB devices, first, detach all the USB devices other than the keyboard and mouse.
Then, Update the drivers for them all, including the keyboard and mouse, if any third party drivers are installed for them.

Also have a look at USB Driver - General Fix for Problems.

Let us know the results.
___________________________________________________________________________
BSOD ANALYSIS:

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1E, {ffffffffc0000005, fffff80002a891cf, 0, 0}

Probably caused by : ntkrnlmp.exe ( nt!KiExceptionDispatch+f )

Followup: MachineOwner
---------

4: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

KMODE_EXCEPTION_NOT_HANDLED (1e)
This is a very common bugcheck. Usually the exception address pinpoints
the driver/function that caused the problem. Always note this address
as well as the link date of the driver/image that contains this address.
Arguments:
Arg1: ffffffffc0000005, The exception code that was not handled
Arg2: fffff80002a891cf, The address that the exception occurred at
Arg3: 0000000000000000, Parameter 0 of the exception
Arg4: 0000000000000000, Parameter 1 of the exception

Debugging Details:
------------------
READ_ADDRESS: GetPointerFromAddress: unable to read from fffff80002cc1100
GetUlongFromAddress: unable to read from fffff80002cc11c0
0000000000000000 Nonpaged pool

EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

FAULTING_IP:
nt!KiExceptionDispatch+f
fffff800`02a891cf 0f29742430 movaps xmmword ptr [rsp+30h],xmm6

BUGCHECK_STR: 0x1E_c0000005_R

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

PROCESS_NAME: svchost.exe

CURRENT_IRQL: 0

LAST_CONTROL_TRANSFER: from fffff80002ad4728 to fffff80002a89c00

STACK_TEXT:
fffff880`06df4028 fff... Read more

http://www.sevenforums.com/bsod-help-support/294105-random-freezes-bsod-stop-0x0000001e.html
Relevancy 57.62%

I am running Windows Professional SP and using a wireless USB card to connect to my home network The USB card is a Dick Smith Electronics New Zealand branded adapter using Solved: wireless Stop 0x0000001E one a cheap one which uses a Ralink RT chip Anyway whenever I transfer files from this computer to another the copying starts but doesn t get very Solved: Stop 0x0000001E using wireless adapter far The computer crashes shortly after starting with Stop x E quot KMODE EXCEPTION Solved: Stop 0x0000001E using wireless adapter NOT HANDLED quot The file quoted causing the problem is quot rt sys quot which is the driver for the USB card I have searched the internet and read the Microsoft tech support page about this error and I think the driver is sending requests which the processor cannot understand or something like that I have tried updating the driver but this has not worked I have tried the card on a Windows XP computer with the same driver and it transfers files fine Any help is greatly appreciated PS I have also the quot PAGE FAULT IN NONPAGED AREA quot error before but only once nbsp

Relevancy 57.62%

I have been getting different BSOD but this is the most recent one i occured,Please help because i don't really wanna spend money on fixing my computer..

Thanks in advance guys

A:Random BSOD,stop 0x0000001E (0xFFFFFFFFC000328)

Hello spadexhearts and welcome to Sevenforums.

BSOD Analyse

I've seen pointers towards your USB drivers.

Possible fix| Go to Device Manager > Expand the USB list > Right click the first one > Select Properties > Go to the Driver tab > Select Uninstall Driver and do it to all of them.

Let Windows detect them and reinstall them.What kind of USB Devices to you have attached to your hub?

SFC /scannow

We usually ask people to do this command to check if Windows is corrupted. It's the most common one used to check if the Windows files are corrupted. If it'll find errors, it'll restore them.



   Tip
If you're having a custom customization layer on your Aero, it's likely to get restored to default.
Press Start | search 'cmd' | Right-click it
| open as Admin | type SFC /SCANNOW

SFC /SCANNOW Command - System File Checker

Best Regards,
Frederik.

http://www.sevenforums.com/bsod-help-support/244492-random-bsod-stop-0x0000001e-0xffffffffc000328.html
Relevancy 57.19%

Here is a screenshot of the BSOD itsself and also got a copy of the error report

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 2057

Additional information about the problem:
BCCode: 1e
BCP1: FFFFFFFFC0000094
BCP2: FFFFF8800C670D60
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\112314-13993-01.dmp
C:\Users\The Riddy\AppData\Local\Temp\WER-14040-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
Full specs are as follows can be provided if needed
 

A:Random Blue screen of death ***STOP: 0x0000001e***

Go to C:\Windows\Minidump\ and select all the .dmp files. Right-click sending the files to a compressed(zipped)folder. Upload this folder as a file here, so we can read and decode them
 

http://www.techspot.com/community/topics/random-blue-screen-of-death-stop-0x0000001e.207061/
Relevancy 57.19%

Hello all,

A few days ago my computer began experiencing random BSOD. I wish I knew was precipitated it, but I cannot. It seems random. Sometimes it happens when opening a browser. Other times it crashes on bootup. It gives me the stop error of 0x0000001e and says IRQL_NOT_LESS_OR_EQUAL. It's crashes three times while trying to post this.

Here is the 'grab all' file. Oh please don't crash while attaching it. . .

Thank you in advance.

A:Random BSOD, IRQL_NOT_LESS_OR_EQUAL, stop error 0x0000001e

Welcome to SevenForums

Please upload your msinfo32.nfo file. To get this: Start Menu -> Type msinfo32 into the Search programs and files box -> When it opens, go to File, Save -> Save as msinfo32.nfo and save in a place you will remember -> Let it finish the process of gathering and saving the system info -> Right click the .nfo file, click send to compressed (zipped) folder -> Upload the .zip file here.


Code:
fffff880`033bd9c8 fffff880`02eba8d1Unable to load image \??\C:\windows\system32\Drivers\SYMEVENT64x86.SYS, Win32 error 0n2
*** WARNING: Unable to verify timestamp for SYMEVENT64x86.SYS
*** ERROR: Module load completed but symbols could not be loaded for SYMEVENT64x86.SYS
SYMEVENT64x86+0xc8d1
Norton Internet Security / SYMEVENT64x86.SYS / Source: Carrona.org

The antivirus you are currently using is known and contributing to your BSOD crashes, consider uninstalling it with the Norton Removal Tool and replace with Microsoft Security Essentials at least to test.Norton Removal Tool
Recommended antivirus program for Windows 7 based on stability compared to others:- Microsoft Security Essentials - Free Antivirus for Windows
Malwarebytes - The Free version
Good and Free system security combination.
Do not start the free trial of Malware Bytes; remember to deselect that option when prompted.

Run a full scan with both (separately) once downloaded, installed and updated.

Get the latest version/drivers for the Intel Rapid Storage stuff from this link, or uninstall them if you don't need it.

Code:
fffff880`033b6098 fffff880`01059106Unable to load image \SystemRoot\system32\DRIVERS\iaStor.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for iaStor.sys
*** ERROR: Module load completed but symbols could not be loaded for iaStor.sys
1: kd> lmvm iaStor
start end module name
fffff880`01020000 fffff880`01174000 iaStor T (no symbols)
Loaded symbol image file: iaStor.sys
Image path: \SystemRoot\system32\DRIVERS\iaStor.sys
Image name: iaStor.sys
Timestamp: Thu Jan 13 07:50:12 2011 (4D2E5A54)
CheckSum: 0007188C
ImageSize: 00154000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Run the System File Checker that scans the of all protected Windows 7 system files and replaces incorrect corrupted, changed/modified, or damaged versions with the correct versions if possible:SFC /SCANNOW Command - System File Checker
Run Disk Check on your hard disk for file system errors and bad sectors on it:Disk Check
Let us know the results and await to receive the nfo. file.

http://www.sevenforums.com/bsod-help-support/262242-random-bsod-irql_not_less_or_equal-stop-error-0x0000001e.html
Relevancy 57.19%

Here is a screenshot of the BSOD itsself and also got a copy of the error report

Attachment 341393


Code:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 2057

Additional information about the problem:
BCCode: 1e
BCP1: FFFFFFFFC0000094
BCP2: FFFFF8800C670D60
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\112314-13993-01.dmp
C:\Users\The Riddy\AppData\Local\Temp\WER-14040-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Full specs are as follows can be provided if needed

A:Need help with Random Blue screen of death ***STOP: 0x0000001e***

Please follow Blue Screen of Death (BSOD) Posting Instructions

http://www.sevenforums.com/bsod-help-support/353172-need-help-random-blue-screen-death-stop-0x0000001e.html
Relevancy 57.19%

This screen pops up as soon as I turn on wireless and connect to the Internet.  It started this morning after I downloaded what I thought was a "Print to PDF" application from www.digitaltrends.com.  Instead, I got a bunch of apps included
Bubble Dock, Chromium, Driver Restore, and more.  I was able to uninstall everything except a folder labeled Coupoon.
*** STOP: 0x0000001E (0xFFFFFFFFC00000094,0xFFFFFF8000C074D1E,0x0000000000,0xFFFFFFFFFFD)
Windows 7 Pro
Any ideas would be helpful, thank you!

A:STOP: 0x0000001E (0xFFFFFFFFC00000094,0xFFFFFF8000C074D1E,0x0000000000,0xFFFFFFFFFFD)

Your time is so far off you will not get updates (or anything else)  It appears you aare on a domain, if this is not correct you are running a pirated key.
Your broadcom driver is corrupt and need re-installation
Your BIOS is corrupt and needs updatin

Adobe reader is corrupt
Etc, etc, etc.  Your best bet is a clean install
Wanikiya and Dyami--Team Zigzag

https://social.technet.microsoft.com/Forums/en-US/be07180b-a233-4fef-9706-019c74e0ba1e/stop-0x0000001e-0xffffffffc000000940xffffff8000c074d1e0x00000000000xffffffffffd?forum=w7itprogeneral
Relevancy 56.33%

Running Win2000 sp3, Norton systemworks 2003, zonealarm pro, and GoBack. When I use the floppy drive, I get the following in a blue screen:
STOP: 0X0000001E (0XC0000005, 0X80004001, 0X00000001, 0X00000006) KMODE EXCEPTION NOT HANDLED
ADDRESS 80004001 BASE AT 80001000, DATE STAMP 3C989E09 HAL.DLL

This is the only time I get this error. I am simply trying to write or read a floppy. I have all drivers up to date.
 

Relevancy 56.33%

I have been having random crashing/ freezing for the last week now, if anybody can help me, please, please help me. I will upload my mini dumps from the crashes.
 

A:Hourly BSODs on Win 7 Home Premium, error STOP: 0x0000001E

hey master 972542 welcome to TS ,
OK for some reason it wont let me open the minidum on this PC dam thing so will have a look when i get home however some of the usual suspects that cause this error are:
Device driver, hardware, System service, compatibility, memory, BIOS

Yhu could run a file system check first. To do that type cmd in search>right click and run as admin>sfc /scannow (note the space between sfc and "/"). Also make sure that yhu have the most upto date device drivers for yhur hardware etc. let us know what happens

Hope this helps
James
 

http://www.techspot.com/community/topics/hourly-bsods-on-win-7-home-premium-error-stop-0x0000001e.175795/
Relevancy 55.9%

Hello everyone This will be my first post on the Win forums so please excuse me for sounding like a bit of a newbie Starting about weeks ago I began receiving BSOD's with the stop code x E After having my computer checked by the Geek Squad in Best Buy they couldn't really tell me what the issue was but were pretty certain it was a driver issue They also did a full system diagnostic and my hardware was determined not to be the issue This lead to them uninstalling and reinstalling the video card Nvidia Geforce GTX and they had me on my way But to no avail for last night when I was gaming Borderlands co-op I received a BSOD with the pre-mentioned code I copied down the code and restarted my computer Like every time before this was BSOD's in total I noticed that my Wireless USB Adapter Linksys AE Dual-Band was not recognized upon start-up and was quite hot to the touch I disconnected and reconnected the device which worked To make a long story short I have basically pinned the issue down to my wireless adapter But what does everyone think Would USB Issue? Gaming, Adapter 0x0000001E Code Wireless While BSOD Stop this diagnosis make sense I uninstalled and re-installed the adapter driver but does is this enough Thank you in advance for any help it would be greatly appreciated System Specs pre-built Cyberpower PC AMD FX- Core Processor Nvidia Geforce GTX GB RAM TB HD Gigabyte M MT-S Motherboard

A:BSOD Stop Code 0x0000001E While Gaming, Wireless USB Adapter Issue?

Please follow the http://www.sevenforums.com/crashes-d...tructions.html so we can assis t you better.

-Justin

http://www.sevenforums.com/bsod-help-support/243944-bsod-stop-code-0x0000001e-while-gaming-wireless-usb-adapter-issue.html
Relevancy 55.9%
A:BSOD playing World Of Tanks, Technical information ***STOP: 0x0000001E

These crashes were caused by memory corruption (probably a driver).
Please run these two tests to verify your memory and find which driver is causing the problem.

If you are overclocking anything reset to default before running these tests.
In other words STOP!!!
1-Memtest.





Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.



RAM - Test with Memtest86+

2-Driver verifier






Quote:
Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

So, I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Special Pool", "Force Pending I/O Requests" and "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

Reboot into Windows (after the crash) and turn off Driver Verifier by going back in and selecting "Delete existing settings" on the first page, then locate and zip up the memory dump file and upload it with your next post.

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.

If that doesn't work, post back and we'll have to see about fixing the registry entry off-line:

Code:
Delete these registry keys to stop Driver Verifier from loading (works in XP, Vista, Win7):
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\VerifyDrivers
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\VerifyDriverLevel



Using Driver Verifier to identify issues with Windows drivers for advanced users

http://www.sevenforums.com/bsod-help-support/209930-bsod-playing-world-tanks-technical-information-stop-0x0000001e.html
Relevancy 55.9%

Hey everyone!

For the past few weeks that I've been playing Star Wars: The Old Republic, I've been getting BSOD's every time I play. I've noticed that it only happens when I'm playing SWToR. I tried to fix the error by reformatting my computer, which didn't help. I've run memtests, switching the RAM cards around, etc., again to no avail. Any information you guys could give me would be great, I'm really getting to my wits end here.

Thank you!

A:BSOD while playing Star Wars ToR, stop error code 0x0000001E

There seems to be a problem with your Windows activation. Please post this report: Activation Issue Posting Instructions

http://www.sevenforums.com/bsod-help-support/307672-bsod-while-playing-star-wars-tor-stop-error-code-0x0000001e.html
Relevancy 55.04%

Hi this is my first 0X0000001E, BSODs, locks Stop Error up/auto Multiple computer reboots post so I hope I can provide everything needed ISSUE I have been getting multiple BSOD for several months Multiple BSODs, Stop Error 0X0000001E, computer locks up/auto reboots came on this forum a couple months ago and read other posts and then updated my bios version flashed it and that seemed to help for awhile but getting BSOD's and computer lock ups more and more The BSOD's are typically have a stop error message in them Most recently Stop X E Xffffffffc Xfffff zfb fa x x Also the computer has been randomly locking up mouse doesn't move requiring a reboot and other times the system is just automatically rebooting Lastly and more recently occasionally my computer says it can't Multiple BSODs, Stop Error 0X0000001E, computer locks up/auto reboots start and does a 'error check' when booting up Not always but sometimes rebooting - X and it goes away I've also noticed a strange sound hard drive when booting up which started about a month ago but after the initial BSOD's I ran the short Seagate HD tests and they came back clean so far Will try to run Memtest and post Any help is much appreciated Attaching the performance report and zip of the dump files Thanks -JC Computer specs Purchased this as build to order about years ago bit Asus pt Motherboard X chipset I Quad Core Processor Ghz GB video card GT GB memory Windows home premium

A:Multiple BSODs, Stop Error 0X0000001E, computer locks up/auto reboots

Well, I guess I need help with how to upload the performance report and zip folder with the dump files acccording to the BSOD post instructions. I zipped it up in a folder using the windows zip option, but the attachment (paper clip) won't attached the folder, it wants me to pick a specific file. There is like 80-100 files in the folder, so don't think I want to attach them all. Anyone know how to attach a zip folder?

http://www.sevenforums.com/bsod-help-support/215794-multiple-bsods-stop-error-0x0000001e-computer-locks-up-auto-reboots.html
Relevancy 51.17%

Hello,

A few days ago I got a random BSOD with the 0x0..1E stop error. Now my computer will rarely boot and when it does it still randomly gets the same BSOD. I once got a 1D stop error but its mostly 1E that keeps happening. I run Windows 7 Professional 64-bit and this time I used a Windows DVD to start up my computer. One time and only one I got the error message (while booting the computer) "BOOTIMGR corrupt, system couldnt boot" or something like that. I restarted my computer after I saw that and it was gone. I've attached two ZIP files of two different .dmp files that were created today with about 15-20 minutes in between them. Is there something wrong with my bios? If not, what could it be?

Thank you for any support, greatly appreciated

A:Random BSOD stop error 0x0000001E, hardware error?

Also maybe worth noting that I had not updated drivers in a while, right after posting this I updated my monitor's drivers. The rest were up to date.

http://www.sevenforums.com/bsod-help-support/277220-random-bsod-stop-error-0x0000001e-hardware-error.html
Relevancy 50.74%

Hello,
I receive the BSOD every time I boot windows normally. I can boot fine in safe mode and have used AVG, Malwarebytes, and Spybot Search & Destroy. All three programs return no issues. I've attached the dump files hoping someone will be able to assist me. I believe this is a kernel driver issue however don't know how to read the dump files to find the issue. Any help you're able to provide will be greatly appreciated! Thanks!

Sorry, I meant to add the additional STOP codes that show up on my BSOD:

0xFFFFFFFFC0000005
0xFFFFF800035836EA
0x0000000000000001
0x0000000000000018

A:BSOD on normal boot, error 0x0000001E

Welcome
Your bug checks and their usual causes:

Code:
STOP 0x0000001E: KMODE_EXCEPTION_NOT_HANDLED
Usual causes: Device driver, hardware, System service, compatibility,
Remote control programs, memory, BIOS
BugCheck 1E, {ffffffffc0000005, fffff800032be405, 0, ffffffffffffffff}
Probably caused by : ntkrnlmp.exe ( nt!KeStackAttachProcess+115 )
----------------
STOP 0x0000000A: IRQL_NOT_LESS_OR_EQUAL
Usual causes: Kernel mode driver, System Service, BIOS, Windows, Virus scanner,
Backup tool, compatibility
BugCheck A, {dc, 2, 1, fffff8000330f405}
Probably caused by : ntkrnlmp.exe ( nt!KeStackAttachProcess+115 )
----------------
STOP 0x00000050: PAGE_FAULT_IN_NONPAGED_AREA
Usual causes: Defective hardware (particularly memory - but not just RAM),
Faulty system service, Antivirus, Device driver, NTFS corruption, BIOS
BugCheck 50, {fffff8a000b24000, 0, fffff800032dd9ca, 0}
Probably caused by : ntkrnlmp.exe ( nt!wcsstr+56 )
Suggestions on problematic software:

Code:
Start Menu\Programs\AVG Public:Start Menu\Programs\AVG Public
Start Menu\Programs\Spybot - Search & Destroy Public:Start Menu\Programs\Spybot - Search & Destroy Public
Please uninstall AVG, it's known to cause BSoD on some systems.
Spybot does detect few stuffs, but it's known to slow down the system and causes corruption as well.AVG | Download tools and utilities
Replace with Free MSE, it's light weight and does not cause problem like other antivirus programs do. (PS: MSE & MBAM are a great combination.)Microsoft Security Essentials - Free Antivirus for Windows
Remove any kind of 3rd party remote control program if you have them

Run the System File Checker that scans the integrity of all protected Windows 7 system files and replaces incorrect corrupted, changed/modified, or damaged versions with the correct versions if possible:SFC /SCANNOW Command - System File Checker

Run Disk Check on your hard disk for file system errors and bad sectors on it:Disk Check
Let us know the results

http://www.sevenforums.com/bsod-help-support/258463-bsod-normal-boot-error-0x0000001e.html
Relevancy 50.74%

I am typing this original post from my cellphone because that is where I wrote the blue screen error finally once it started happening frequently just today so please do forgive me if I am missing anything but I'll come back on my Desktop and try to finish anything needed in the post once I submit it from my phone Here is the error message STOP x E XFFFFFFFFC XFFFFF DC X X I will let you know right off the bat that I am definitely not a techie so this is all very confusing to me Please any help would be extremely appreciated Thanks again I'm advance Now before I came here to post I did do 0x0000001E plz! Random Random and Restarts, BSOD (STOP: Help ) a few hours of research and eventually took the following steps I have reinstalled my Nvidia Graphics Driver I have deleted uninstalled cleaned up a great BSOD Random and Random Restarts, Help plz! (STOP: 0x0000001E ) deal of space on my desktop I have used Safe Mode to enter my Device Manager where I looked at my Network Adapters and made sure that all of BSOD Random and Random Restarts, Help plz! (STOP: 0x0000001E ) them were up to date this was easy because I only had network adapters The first two were both up to date The third one is quot Microsoft Virtual BSOD Random and Random Restarts, Help plz! (STOP: 0x0000001E ) Wifi Miniport Adapter quot which wouldn't allow me to update because it said it was not from a quot trusted source quot and windows didn't want to authorize For this reason I just right-click and Disabled it I have run SFC scannow from cmd as Administrator The results quot Windows Resource Protection did not find any integrity violations quot That is all I have done so far steps amp I just did now so I haven't had a chance to see if this fixed my problem yet or not but I have a feeling that it wouldn't so that is why I am asking for help now in advance A little background about my desktop I have had it for a few years now and I have been using it mostly for gaming I have played tons and tons of games on it without having any issues before whatsoever it is an amazing desktop It out-runs almost all of my friends' desktops that have higher specs The first random BSOD I have ever got on it was about - weeks ago while I was playing world of Warcraft Because I have never had one before I did not think too much of it But then about a - weeks ago it happened again and I began to get worried The second time it happened I was not playing any games at all I was just browsing the Internet Then this week it happened again and as of yesterday my Desktop would sometimes not even blue screen instead it would just turn off randomly by itself and then restart on its own Since yesterday this has occurred quite a few times once every - hours or so Two of the times it was while I was browsing the Internet or my email The rest of the time it happened all while I was playing World of Warcraft What I don't understand is in between now and when I first started playing WoW about months ago I have not changed anything on the computer and there were absolutely no problems running WoW whatsoever during the first month when I was actually playing it more There are only a very few couple of things that have changed All of which were automatic updates basically My Windows did run a rather large automatic update right around the same time that I started having the first of these issues My Nvidia driver was also updated to a newer version which I have reinstalled now World of Warcraft did have a recent patch I connected my Desktop to an external TB WD My Cloud If there was anything else I can't think of it But the only change here I mentioned that actually happened around as far back as the first BSOD occurrence was the Windows Automatic Update Anyways thanks for any help it's gotten really really bad now In Safe Mode I'm not having issues but as of just tonight in the passed - hours if I log onto WoW my Desktop will either BSOD or automatically restart within only being online - min I can't pla... Read more

A:BSOD Random and Random Restarts, Help plz! (STOP: 0x0000001E )

Hello oksm08, and welcome to Seven Forums.

Please read the instructions here: Blue Screen of Death (BSOD) Posting Instructions, and post back with the needed information. One of our BSOD experts should be by later when able to further help.

http://www.sevenforums.com/bsod-help-support/333884-bsod-random-random-restarts-help-plz-stop-0x0000001e.html
Relevancy 48.16%

I am not sure if this is where it belongs or if it is a Graphics Card issue I have an Acer Aspire z- with an Intel R Pentium R p GHz MB cache This only happens to me while I am playing The Sims I have the game set on the lowest quality settings even though my laptop quot claims quot to be HD LED etc This issue still happens As you may know I cannot replace the graphics card as it is apart of the motherboard and to buy a new motherboard with a better graphics card would cost more than a new Graphics XP driver for Display Windows Driver Intel Stop Accelerator computer I have been the my manufacture's website and tried installing an Display driver Intel Graphics Accelerator Driver for Windows XP Stop update of the graphics card and that didn't do the trick either I am at my wits end and I just want to play the game without it shutting down and freezing my computer The reason I know the error is because I do Alt Tab to get back to the desktop The way it acts up while I am in game is the screen blacks out but I can still see the software's mouse and then it blinks a couple times and then freezes completely causing me to do a hard shut down What can I do to resolve this issue

A:Display driver Intel Graphics Accelerator Driver for Windows XP Stop

i havent found anybody that sells motherboards for acer with better a better graphics chipset. i would really like to have a better chipset tn this radeon express x1200.

http://www.sevenforums.com/drivers/254215-display-driver-intel-graphics-accelerator-driver-windows-xp-stop.html
Relevancy 47.73%

Hello,
We have a barcode label printer device which when connected through USB on a Windows 7 machine automatically loads a windows approved driver from the driver store. This driver does not work as expected, so we are planning to use another custom driver provided
by the vendor, which we will be deploying it through SCCM. However, there may be cases where users will have inserted the printer before these custom drivers are in place which would cause these default generic drivers to load.
So our aim is to,
1. Remove this auto loaded default driver from the system if present
2. also, if possible, to remove it from the Windows driver store itself.
3. We do not want to change the Windows Default plug and play driver loading behaviour which would affect other USB devices.
Is there a command line to do this?
Thanks in advance.
Steve

https://social.technet.microsoft.com/Forums/en-US/154b5fa8-7106-4da9-8391-5763b2a6a3f4/how-to-stop-windows-from-automatically-loading-a-particular-driver-from-the-driver-store?forum=w7itprogeneral
Relevancy 44.29%

I can no longer boot -bit Win Pro in normal or Safe Mode on one computer due to BSOD STOP x B XFFFF A E XFFFFFFFFC But there is additional extremely important info I have two separate month-old backup boot partitions and they won't boot either for exactly the same reason One is on a second partition of the main SSD my regular boot partition is on the first partition and the other is on a regular hard disk Therefore it's extremely unlikely that this is a disk drive or partition problem The last thing I did was use AutoRuns to disable some unwanted startups my startup manager Chameleon Startup Manager didn't see and thus couldn't disable However as I said above I have to or 0x0000007B Safe Win7 due any Can't STOP Boot disk/part Boot two separate month-old backup boot partitions and I made no changes whatsoever to these so surely one or the other should boot fine but I get the same BSOD on all boot partitions What I've done so far - Ran Startup Repair times total Each time it reports that it could not repair the problem - Tried system restore It reported every restore attempt failed - Booted up with LSoft Active Boot Disk latest version x Then I ran Check Disk on all disks and partitions and no problems were reported anywhere Then I examined all the disks and partitions and the reports said everything is perfect all partitions were Win7 Can't Boot or Safe Boot any disk/part due to STOP 0x0000007B of the right type and the integrity of all disks were ideal Then I ran it's MemTest for hours with Win7 Can't Boot or Safe Boot any disk/part due to STOP 0x0000007B no problems - Win7 Can't Boot or Safe Boot any disk/part due to STOP 0x0000007B Confirmed the BCD store for all disks were setup correctly - Disconnected various hard disks and tested via trial and error if this helped It never did - I've confirmed I have the latest BIOS installed Note that this BSOD occurs so early in the boot process that it does not produce any dump files so I can't post them Note also that the system booted perfectly immediately prior to the AutoRuns changes to the main boot partition so the odds are ridiculously low that this is any kind of hardware-related problem At the same time the odds are ridiculously low that a software problem is the cause given that the other two backup boot partitions won't boot either and give the same BSODs when I try to boot them It would thus seem that if there is such a low probability of either a hardware or software problem then my system should at least boot one of the backups but it won't I'm baffled What can I try next

A:Win7 Can't Boot or Safe Boot any disk/part due to STOP 0x0000007B

0x7B's are often caused by physical disk failure. Remove the disk and install it into another computer. Now use SeaTools for DOS to check the drive. Unfortunately that is the only option available.

SeaTools for DOS and Windows - How to Use

http://www.sevenforums.com/general-discussion/398948-win7-cant-boot-safe-boot-any-disk-part-due-stop-0x0000007b.html
Relevancy 44.29%

I can no longer boot -bit Win Pro in normal or Safe Mode on one computer due to BSOD STOP x B XFFFF A Boot STOP or Can't Boot 0x0000007B due to disk/part Safe Win7 any E XFFFFFFFFC But there is additional extremely important info I have two separate month-old backup boot partitions and they won't boot either for exactly the same reason One is on a second partition of the main SSD my regular boot partition is on the first partition and the Win7 Can't Boot or Safe Boot any disk/part due to STOP 0x0000007B other is on a regular hard disk Therefore it's extremely unlikely that this is a disk drive or partition problem The last thing I did was use AutoRuns to disable some unwanted startups my startup manager Chameleon Startup Manager didn't see and thus couldn't disable However as I said above I have two separate month-old backup boot partitions and I made no changes whatsoever to these so surely one or the other should boot fine but I get the same BSOD on all boot partitions What I've done so far - Ran Startup Repair times total Each time it reports that it could not repair the problem - Tried system restore It reported every restore attempt failed - Booted up with LSoft Active Boot Disk latest version x Then I ran Check Disk on all disks and partitions and no problems were reported anywhere Then I examined all the disks and partitions and the reports said everything is perfect all partitions were of the right type and the integrity of all disks were ideal Then I ran it's MemTest for hours with no problems - Confirmed the BCD store for all disks were setup correctly - Disconnected various hard disks and tested via trial and error if this helped It never did - I've confirmed I have the latest BIOS installed Note that this BSOD occurs so early in the boot process that it does not produce any dump files so I can't post them Note also that the system booted perfectly immediately prior to the AutoRuns changes to the main boot partition so the odds are ridiculously low that this is any kind of hardware-related problem At the same time the odds are ridiculously low that a software problem is the cause given that the other two backup boot partitions won't boot either and give the same BSODs when I try to boot them It would thus seem that if there is such a low probability of either a hardware or software problem then my system should at least boot one of the backups but it won't I'm baffled What can I try next

A:Win7 Can't Boot or Safe Boot any disk/part due to STOP 0x0000007B

0x7B's are often caused by physical disk failure. Remove the disk and install it into another computer. Now use SeaTools for DOS to check the drive. Unfortunately that is the only option available.

SeaTools for DOS and Windows - How to Use

http://www.sevenforums.com/bsod-help-support/398948-win7-cant-boot-safe-boot-any-disk-part-due-stop-0x0000007b.html
Relevancy 44.29%

I can no longer boot -bit Win Pro in normal or Safe Mode on one computer due to BSOD STOP x B XFFFF A E XFFFFFFFFC But there is additional extremely important info I have two separate month-old backup boot partitions and they won't boot either for exactly the same reason One is on a second partition of the main SSD my regular boot partition is on the first partition and the other is on a regular hard disk Therefore it's extremely unlikely that this is a disk drive or partition problem The last thing I did any Win7 Boot to disk/part Safe Boot or due STOP Can't 0x0000007B was use AutoRuns to disable some unwanted startups my startup manager Chameleon Startup Manager didn't see and thus couldn't disable However as I said above I have Win7 Can't Boot or Safe Boot any disk/part due to STOP 0x0000007B two separate month-old backup boot partitions and I made no changes whatsoever to these so surely one or the other should boot fine but I get the same BSOD on all boot partitions What I've done so far - Ran Startup Repair times total Each time it reports that it could not repair the problem - Tried system restore It reported every restore attempt failed - Booted up with LSoft Active Boot Disk latest version x Then I ran Check Disk on all disks and partitions and no problems were reported anywhere Then I examined all the disks and partitions and the reports said everything is perfect all partitions were of the right type Win7 Can't Boot or Safe Boot any disk/part due to STOP 0x0000007B and the integrity of all disks were ideal Then I ran it's MemTest for hours with no problems - Confirmed the BCD store for all disks were setup correctly - Disconnected various hard disks and tested via trial and error if this helped It never did - I've confirmed I have the latest BIOS installed Note that this BSOD occurs so early in the boot process that it does not produce any dump files so I can't post them Note also that the system booted perfectly immediately prior to the AutoRuns changes to the main boot partition so the odds are ridiculously low that this is any kind of hardware-related problem At the same time the odds are ridiculously low that a software problem is the cause given that the other two backup boot partitions won't boot either and give the same BSODs when I try to boot them It would thus seem that if there is such a low probability of either a hardware or software problem then my system should at least boot one of the backups but it won't I'm baffled What can I try next

A:Win7 Can't Boot or Safe Boot any disk/part due to STOP 0x0000007B

0x7B's are often caused by physical disk failure. Remove the disk and install it into another computer. Now use SeaTools for DOS to check the drive. Unfortunately that is the only option available.

SeaTools for DOS and Windows - How to Use

http://www.sevenforums.com/performance-maintenance/398948-win7-cant-boot-safe-boot-any-disk-part-due-stop-0x0000007b.html
Relevancy 43.43%

Hi Today i was trying to restore my backup of boot boot system no 0x0007B WTF STOP no (0xF8958640... cd the partition with the windows xp system on it Of course everything went wrong and Norton Ghost had an error at about I thought i can just boot from the win xp cd and fix the problem no way when i try to boot from the win xp cd i STOP 0x0007B (0xF8958640... no system boot no cd boot WTF get a black screen after checking my pc configuration no driver loading etc when i try to boot from my sata drive it says that there are some missing files that s not strange if ghost didnt work like it should when i try to boot from any other drive i get an error like this A problem has been detected and Windows has been shut down to prevent damage to your Computer If this is the first time you ve seen this Stop error screen restart your computer If this screen appears again follow thease steps Check for viruses on your computer Remove any newly installed hard drives or hard drive controllers Check your hard drive to make sure it is properly configured and terminated Run chkdisk f to check for hard drive corruption and then restart your computer Technical information STOP x B xF xC x x motherboard Gigabyte GA- I GMF-RH can anyone help nbsp

Relevancy 43.43%

Hi I don t No Boot XP Normal Safe, Can Error STOP Boot know how to provide you with everything you might need I ll start with this I have a Dell Dimension no derision please it was XP STOP Error Can Boot Safe, No Normal Boot the best I could do at the time Running Windows XP Professional Media Edition I m getting ready to scrape my XP STOP Error Can Boot Safe, No Normal Boot drive clean and install Windows but would like to use the XP system for a while longer The only recent change I made was to upgrade my Java and my Adobe Acrobat Reader I can not run Avast nor Malwarebytes always ends in a blue screen error I can boot in SAFE mode can not boot in NORMAL or I would do system restore It was functioning albeit slowly a week ago EDITED TO ADD I can start with quot Last known good configuration quot but even though I can log in to my user I cannot DO anything buttons don t work sometimes mouse freezes can t communicate with system Here is the error message which on a search appears to be a hardware or driver error DRIVER IRQL NOT LESS OR EQUALSTOP x D ox x x xF EF EDITED AGAIN TO ADD one more line from error message says quot iastor sys - Address F EF base at F E Date Stamp d c c quot Every time I get the BSD the error might be a little different should I collect a bunch of them Is that enough info for now How can I determine if this is virus caused hard drive failure or just that I knocked a card loose while looking at hardware I have had trouble with a video card Nvidia GeForce that the fan toasted on and I think the drivers are not great for that Thanks for your thoughts

A:XP STOP Error Can Boot Safe, No Normal Boot

Welcome aboard Run the following from safe mode....Download Security Check from HERE, and save it to your Desktop. * Double-click SecurityCheck.exe * Follow the onscreen instructions inside of the black box. * A Notepad document should open automatically called checkup.txt; please post the contents of that document.=============================================================================Please download Farbar Service Scanner (FSS) and run it on the computer with the issue.Make sure the following options are checked:
Internet ServicesWindows FirewallSystem RestoreSecurity Center/Action CenterWindows UpdateWindows DefenderPress "Scan".It will create a log (FSS.txt) in the same directory the tool is run.Please copy and paste the log to your reply.====================================================================================Please download MiniToolBox and run it.Checkmark following boxes:Report IE Proxy SettingsReport FF Proxy SettingsList content of HostsList IP configurationList Winsock EntriesList last 10 Event Viewer logList Installed ProgramsList Devices (do NOT change any settings here)List Users, Partitions and Memory sizeClick Go and post the result.=============================================================================Download Malwarebytes' Anti-Malware (aka MBAM): http://www.malwarebytes.org/products/malwarebytes_free to your desktop. * Double-click mbam-setup.exe and follow the prompts to install the program. * At the end, be sure a checkmark is placed next to Update Malwarebytes' Anti-Malware and Launch Malwarebytes' Anti-Malware, then click Finish. * If an update is found, it will download and install the latest version. * Once the program has loaded, select Perform quick scan, then click Scan. * When the scan is complete, click OK, then Show Results to view the results. * Be sure that everything is checked, and click Remove Selected. * When completed, a log will open in Notepad. * Post the log back here.Be sure to restart the computer.The log can also be found here:C:\Documents and Settings\Username\Application Data\Malwarebytes\Malwarebytes' Anti-Malware\Logs\log-date.txtOr at C:\Program Files\Malwarebytes' Anti-Malware\Logs\log-date.txt=============================================================================Download aswMBR to your desktop.Double click the aswMBR.exe to run it.If you see this question: Would you like to download latest Avast! virus definitions?" say "Yes".Click the "Scan" button to start scan.On completion of the scan click "Save log", save it to your desktop and post in your next reply.NOTE. aswMBR will create MBR.dat file on your desktop. This is a copy of your MBR. Do NOT delete it.

http://www.bleepingcomputer.com/forums/t/478007/xp-stop-error-can-boot-safe-no-normal-boot/
Relevancy 42.14%

Every time my machine boots up, the SIS PCI Audio driver install pops up and wants to be installed. It just started doing this out of the blue. I've tried letting it do its thing, tried removing the driver from control panel first, you name it. The sound functions fine, but it's a pain in the butt coming up every time. Of course, it could be a sign of something worse???

Any help please? It's an M830LR motherboard with built in audio and the SIS 735 chipset.
 

A:Can't stop the driver install

Do you have the motherboard CD? If so pop that in and install the drivers. You can also download the newest drivers from the PCCHIPS website and install those.

Or are you also using a seperate soundcard and want to disable the onboard SIS sound?
 

https://forums.techguy.org/threads/cant-stop-the-driver-install.180069/
Relevancy 42.14%

ImageShack? - Online Photo and Video Hosting
Report: http://pastehtml.com/view/1e5yrq8.html
Minidump:
windows 7 64 bit
video card: Mobile Intel? 4 Series Express Chipset Family

(still un fixed)

A:Driver has stop working.

According to the error it's "drivers for XP" You need Windows 7 (or at least Vista drivers). That will probably fix the problem.

http://www.sevenforums.com/graphic-cards/158297-driver-has-stop-working.html
Relevancy 42.14%

I keep having an driver update showing up and I no longer have the device on my pc. How do I keep that from showing up?

A:Stop driver update

Originally Posted by Jackman33


I keep having an driver update showing up and I no longer have the device on my pc. How do I keep that from showing up?



Are you sure all traces of the Device have been removed
Also what device was it that you had installed only some do leave behind a file or folder

http://www.tenforums.com/drivers-hardware/55005-stop-driver-update.html
Relevancy 41.71%

I have this problem with my notebook for quite sometime. Whenever i watch any movie, full screen or not, any software, RMVB or WMP or WCMP or any type of software the screen with flash and blackout few second and then an error msg with pop out saying Display driver R300 stop respond and had successful recover. I know this is not a new post to this problem, but i've been try to google for the solution so long and never found it included update the display driver provided by Compaq. Nothing work. Can anyone here help? Thanks in advance
 

A:Display driver stop responding

What Compaq laptop is it that you have? And what version of Windows are you running?
 

https://forums.techguy.org/threads/display-driver-stop-responding.888443/
Relevancy 41.71%

Hello I have a Dell studio laptop with windows that recently i have encountered a specified) Stop 0x1e (driver error not bluescreen stop error after login with the code x e This error describes it as either a shortage of space or possibly a drivernot functioning correctly I have researched all over and keep coming up with the same unhelpful resolutions and am out of options I have tried startup repair system restore and updating but nothins worked and now i am unable to login at all It started about and every so often i could get it to log in but now after using system restore which fails everytime it has became unusable altogether When i boot in safe mode all is fine but i am unable to single out this problem maybe due to lack of experience but the startup folder only contains my Mcafee and my Dell Dock I opened the event veiwer and found a few logs dealing with my Crashes one of which reads quot Computer rebooted from bugcheck Bugcheck was x e Oxffffffffc xfffff b 0x1e Stop error (driver not specified) x x efa A dump was Saved C Windows MEMORY DMP Report Id - - quot and another reads quot Following Boot-start or system-start drivers failed to load AFD DfsC quot I am unable toget help from Micrsoft or any other professional help I am unable to do a system restore because it always fails to retrieve a driver file but its always a differnt driver and I realllllllly dont want to do a reinstallation of windows because i have no storage space to put my important files Please anyone if you have any advice for singling this problem out it would be greatly appreciated nbsp

Relevancy 41.71%

My motherboard is an ASUS P V X-MX with on-board Stop driver? Sound Error from audio C-Media AC version CMI A The latest version of the driver and operating software from the C-Media website is dated December I have two hard drives both the exact same type Western Digital WDC JB GB both with Windows XP Professional with Service Pack installed On my second hard drive I continue to be able to play DVDs on any of my DVD player programs that I wish with no problems However on my primary hard drive I have run into problems Some time ago I don t remember anything about what might have caused it both Windows Media Player and InterActual Player http www interactual com stopped playing my DVD s I Stop Error from Sound driver? could still use InterVideo WinDVD or my ATI Radeon X s DVD playing software with no problems but WMP and IAP stopped playing them WMP would give me an error that when I clicked quot Web help quot said it Stop Error from Sound driver? was related to my Sound driver I went to Windows Update and downloaded the following update Windows XP C Media Electronics Incorporation - Sound - C-Media AC Audio Device Tuesday August Windows Update But this only made the problem worse not better-- now when I try to use WMP or IAP to play a DVD my computer screen just up and suddenly goes dark and I hear the unmistakeable sound of my computer simply up and shutting down and then it does a total system reboot After the reboot I get a popup saying the computer has recovered from a Stop Error caused when a Device Driver suddenly quot stops quot the operating system This is a very serious problem because a number of my DVD s are specially optimized to work with InterActual Player and automatically start it up when I put the DVD in the drive If I try to uninstall the program then the next time I put one of those DVD s in the drive it absolutely absolutely ABSOLUTELY forces my computer to reinstall the software immediately Again on my secondary hard drive Stop Error from Sound driver? this is NOT a problem both programs play the DVD s perfectly Only on my primary hard drive do I get the endless Stop Errors or if I do quot Roll Back Driver quot they simply fail to play the DVD Does anyone have any ideas NYCaribou nbsp

Relevancy 41.71%

Hello 1st time here, there is my dump file & html, any help will be appricieted:
my specs:
Mobo: Asus M4A785T-M
CPU: AMD Athlon II 240 2.8GHz
RAM: 2x2GB A-Data DDR3 1333MHz
GPU: Palit GTX 460 768MB
HDD: 2x WD 640GB & 1TB
PSU: Xigmatek 550W...
Don't use 3D...

A:BSOD & Driver stop responding

Your Nvidia driver was the cause

Uninstall the driver, then use driver sweeper to remove leftover Nvidia display driver files
http://phyxion.net/Driver-Sweeper/Dr...Version-2-9-0/
Then install the latest drivers
http://www.nvidia.com/object/win7-wi...ql-driver.html

ASACPI.sys the 2005 version is a huge cause of BSODs


   Information
The 2005 version of this driver is a known BSOD cause.
Please visit this link: ASUSTeK Computer Inc. -Support- Drivers and Download P7P55D LE
Scroll down to the Utilities category, then scroll down to the "ATK0110 driver for WindowsXP/Vista/Windows 7 32&64-bit" (it's about the 12th item down).
Download and install it.
Go to C:\Windows\System32\drivers to check and make sure that the ASACPI.sys file is date stamped from 2009 or 2010 (NOT 2005)


Code:
ASACPI.sys fffff880`11df6000 fffff880`11dfe000 0x00008000 0x42476c4c 28/03/2005 06:30:36
Update any Razer driver, the one you use is seriously outdated, remove that device if no Windows7 certified drivers are found
http://www.razersupport.com/index.ph...nloads&_a=view

Code:
DB3G.sys fffff880`038de000 fffff880`038e3280 0x00005280 0x436ef527 07/11/2005 10:33:11

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck D1, {fffff88769117750, 2, 1, fffff88011220d4e}

Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+121d4e )

DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arguments:
Arg1: fffff88769117750, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, value 0 = read operation, 1 = write operation
Arg4: fffff88011220d4e, address which referenced memory

Debugging Details:
------------------
WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff80002ecd0e8
fffff88769117750

CURRENT_IRQL: 2

FAULTING_IP:
nvlddmkm+121d4e
fffff880`11220d4e 4c891cd0 mov qword ptr [rax+rdx*8],r11

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

BUGCHECK_STR: 0xD1

PROCESS_NAME: System

TRAP_FRAME: fffff88004f6e370 -- (.trap 0xfffff88004f6e370)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=fffff88009b22000 rbx=0000000000000000 rcx=fffffa800455d668
rdx=00000000ebebeaea rsi=0000000000000000 rdi=0000000000000000
rip=fffff88011220d4e rsp=fffff88004f6e500 rbp=0000000000000000
r8=0000380f70f00000 r9=000000000000000f r10=0000000000000000
r11=0000380f70f00000 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei pl nz na po nc
nvlddmkm+0x121d4e:
fffff880`11220d4e 4c891cd0 mov qword ptr [rax+rdx*8],r11 ds:e9d0:fffff887`69117750=????????????????
Resetting default scope

LAST_CONTROL_TRANSFER: from fffff80002c9bbe9 to fffff80002c9c640

STACK_TEXT:
fffff880`04f6e228 fffff800`02c9bbe9 : 00000000`0000000a fffff887`69117750 00000000`00000002 00000000`00000001 : nt!KeBugCheckEx
fffff880`04f6e230 fffff800`02c9a860 : 00000000`08000600 fffffa80`03b7e9d0 00000000`00000000 0000000f`70f00038 : nt!KiBugCheckDispatch+0x69
fffff880`04f6e370 fffff880`11220d4e : fffffa80... Read more

http://www.sevenforums.com/bsod-help-support/154701-bsod-driver-stop-responding.html
Relevancy 41.71%

Hi,
I hope this is where i should post this.I'm having troubles with my ATI Radeon HD 5450.A few days ago i wiped my computer and installed Windows 7 32bit instead of Windows 7 64bit that i had.
However the problem still exists.I'm getting "(AMD) Display driver has stopped working and has recoverd" after my monitor turns blank or any other solid color or freezing for a few seconds.Sometimes when it's freezing more than a few seconds or turns blank or black freezes my computer and i have to reset the computer.

I could use any kind of help...
Also i don't know much about computers so please be as simple as you can...

Thanks!!!

A:AMD driver stop working and recovered (help!!!)

Hi.

Lets check\test few software\hardware.

Download and install the new version of Driver Sweeper.
Download the most recent software\driver for your ati AMD Graphics Drivers & Software

Uninstall ati software\driver,restart in safe mode,run driver sweeper,choose only AMD-Display and clean,restart in normal mode.
Install the new ati software\driver,restart.

Update DirectX
Read carefully the instructions and run NVIDIA/AMD Video Card - Test with OCCT post here the results.

http://www.sevenforums.com/drivers/210905-amd-driver-stop-working-recovered-help.html
Relevancy 41.71%

G'day I have a Dell badged logitech wireless keyboard and mouse with the logitech single installing... Stop driver one setpoint software Someone has sent Stop one single driver installing... me I suspect uSoft a driver update for the bluetooth subsystem it tries to install a USB driver for my bluetooth usb device but fails My bluetooth device is not x ready so I just get a yellow shriek and of course this breaks my wireless keyboard and mouse which uses a bespoke logitech BT dongle If I roll back the driver everything is hunky dory But every so oftern PnP kicks in and wants to reinstall the driver Which I know will break my bluetooth stack again so I click on no but it's starting to become annoying and I'm not the only one that uses this pc If I let it install then delete the device and check the quot delete driver quot it will find the old driver but then a while later we go back windows wanting to install the quot new quot driver and tbh I've no idea where it's stashed this driver for quot pending quot I know you can switch of auto driver Stop one single driver installing... installation on a global basis but that will stop driver installation if I plug something into the USB and Network USB ports I have so just want to stop this particular driver Logitech and uSoft are playing the blame game so no help there Any thoughts BTW Win x ultimate retail not oem Loads of RAM and Diskspace and iQuadCore CPU Mark

A:Stop one single driver installing...

Can you not uninstall the uSoft app from Programs and Features?

If you can't... do a System Restore to a couple of few days before you installed the bluetooth subsystem.

http://www.sevenforums.com/drivers/315168-stop-one-single-driver-installing.html
Relevancy 41.71%

I've noticed for the past few days that at least once a day I get the message stating that windows recovered from a problem & to restart my computer. When I click on the send report to Windows message it says I had a device driver stop error. I just recently connected a scanner. But my husband said he made sure we had new drivers downloaded for it.

What do I need to check to make sure we have the correct driver for the ScanJet 3400C scanner?

A:Device Driver Stop Error

Hi .First thing I suggest concentrating on...are these STOP errors, regardless of the cause.Step One: Disable Auto Reboot On System Crash - http://www.theeldergeek.com/auto_reboot_on_system_crash.htm This will (hopefully) provide needed data to troubleshoot the STOP error. This info/data should be reflected in the Event Viewer in the form of an error.How To Use Event Viewer - http://www.bleepingcomputer.com/forums/t/40108/how-to-use-event-viewer/ If you can post the detail from errors that appear to occur at the same time as your STOP errors, we can (hopefully) find out what is wrong or begin to do so.As for the scanner drivers (you can be using the right drivers and still have problems on a system)...http://h10025.www1.hp.com/ewfrf/wc/softwareList?os=228&lc=en&cc=us&dlc=en&product=61835&lang=en XP driver is the top download listed.Louis

http://www.bleepingcomputer.com/forums/t/143750/device-driver-stop-error/
Relevancy 41.71%

hi,

i got problem..

sometimes appear message at bottom right
"display driver stop responding, n windows can repair it"

i noticed when i'm running DX10-dx11 applications

i truly believe when run sisoft sandra benchmark,
video memory test, when select dx11, dx10a, dx10
when progress 50% monitor blank (black) and appear
"display driver stop responding, n windows can repair it"

when i chose benchmark dx9c no problem

then i run dirt2, the game hang when i press enter..

run 1080p movie using haali filter, hang too..

anyone know how to fix this..?

thank you very much..

A:display driver stop responding???

This is an ever on-going problem with cards from both manufacturers (ATI, Nvidia). At this point in time there is currently no one fix for this problem. It can be anything from bad software to a faulty card.

There's a long thread about it here - Driver Stopped Responding And Recovered!

Good luck.

http://www.sevenforums.com/drivers/75626-display-driver-stop-responding.html
Relevancy 41.71%

Hi I believe I have a repeatedly How installing driver stop to from unique trouble with my network adapter It is installing every single time that windows starts always behaving as a different piece of hardware thus driver is named like quot Atheros Ethernet Controller quot and increasing and what more still having different MAC address My problem is that my legal Windows Win Home Premium bit after few startups starts thinking he is illegal How to stop driver from installing repeatedly every time I activate it by phone I am beginning to be desperate about this Over time I was How to stop driver from installing repeatedly thinking about several solutions to this but I am not capable of executing them alone Two examples One possibility is disabling automatic driver installation but in tutorials and forums it is done through pgedit msc that is absent on Home Premium Disabling my network card completely or removing it from my laptop is also a way because I am using only wifi but I havent found any way how to do it Network card is probably broken so sending my nb to service could also work but it is quite inconvenient considering time and money thrown away i dont prefer this option Could somebody help me solving this Any constructive idea is welcome

A:How to stop driver from installing repeatedly

look in device manager right click on the network card and click disable

http://www.sevenforums.com/drivers/185939-how-stop-driver-installing-repeatedly.html
Relevancy 41.71%

This laptop has Windows 7 Premium Installed.
I want to install a HD Audio Driver of my choice.

When I uninstall the Generic Windows 7 HD Audio Device Driver
The driver is automatically re-installed on restart.

Windows 7 Premium does not have GpEdit.msc installed.
An earlier version I came across (version 1.0 on the internet) has limited capability.

How do I prevent Windows Windows 7 from Automatically installing the driver?

Is there a registry entry I can edit to prevent installation of Generic Drivers or specific Generic Drivers i.e HD Audio Device Driver.

Thanks In Advance

A:How Do I Stop Generic Driver Installation

I would just install the driver of my choice. It will replace the generic driver.

http://www.sevenforums.com/drivers/228553-how-do-i-stop-generic-driver-installation.html
Relevancy 41.71%

I have set Windows Device Installation Settings not to download manufacturers apps and disabled the task AMD Updater in Autoruns.

However, Windows 10 Pro still updated my Radeon driver today when I really didn't want it to - and also set all the icons to the left at the same time.

How do I stop the GPU driver updating automatically?

http://www.tenforums.com/graphic-cards/60059-how-stop-radeon-driver-upates.html
Relevancy 41.71%

Hi,

I have a problem with windows "Driver Software Installation".

I have an Audigy 2 ZS card installed. Every time I boot the
machine the ""Driver Software Installation" starts and finalize
with saying that the card is ready to use. This is not correct
as there is no sound. Every time I reboot the same thing happens.

Now, I have disabled Windows Update, I have disabled the devices
etc. but nothing stops this ""Driver Software Installation" from
starting at the next boot.

I would like to install Daniel Kawakami's Audigy_SupportPack_2_18_0001_W7
but when I start, it says it can not install untill I have rebooted
from a previous install which is the "Driver Software Installation"
failed installation. And rebooting of course starts the "Diver Software
Installation" again.

Is there any way to disable the ""Driver Software Installation"?

Thanks.

A:How to stop Win 7 Driver Software Installation

Hi Bernhard, and Welcome to the Forum!

Open Control Panel - System - click Advanced System settings - hardware tab - Device Installation settings, and you'll find it there.

Good luck with that driver bud!

http://www.sevenforums.com/drivers/5010-how-stop-win-7-driver-software-installation.html
Relevancy 41.71%

Ok this is weird I've been going to PC Pit-Stop b c people at this forum recommended it I like the site a lot However I've been having trouble with of their services I wanted to Scan my Drivers to get Pit Driver Pc! @ Crashing The Is Scan Pc Stop My a list of them amp to see if they need to be updated There The Driver Scan @ Pc Pit Stop Is Crashing My Pc! is a feature the site which will do that for you I clicked on it PC Pit-Stop sends you to a partner site that runs the scan That site is quot Touchstone quot http driveragent com PHPSESSID d b d a ae I access the site fine They prompt you to install something I accept It starts to scan just fine Then it gets stuck at finished I left the PC run for over mins amp no change Heres what happened The processing light was blinking solid the whole time My power source exhaust was running the whole time It sounded like my Laptop was in the middle of a large project My keyboard amp mouse were disabled The whole laptop was frozen in that state for over min The only way to recover control is to manually re-boot I don't know what caused this to happen I've had the exact same reaction using both IE amp FF so its not a browser issue I've had PC's crash before but never freeze up like that as if they were in the middle of doing something Can anyone shed some light on this matter Thanks

A:The Driver Scan @ Pc Pit Stop Is Crashing My Pc!

I remember reading on another forum (which I don't visit anymore, as I began to feel that their members didn't know as much as they liked to think that they did...that in itself is worth considering)... anyway, I remember reading several posts that that site (driveragent) is some type of a scam.

It is not my intention to imply anything. I just thought that I would share with you something that I remembered from quite some time ago. Good luck!

http://www.bleepingcomputer.com/forums/t/96036/the-driver-scan-pc-pit-stop-is-crashing-my-pc/
Relevancy 41.71%

Hi all

I have a problem which is beginning to make go a little insane.
I have this non stop update almost every time i restart my pc. I say almost because sometimes it does not.
In a normal day, it will install this update about 6 times.

ASUS - Other hardware - Asus Support Device
This is all i know about this update expect that it is being installed constantly.
It never fails and always installs successfully.

I have turned off the automatically download drivers setting and this has done nothing.

Please any assistance will be welcomed.

A:Non stop recurring driver update

Might have solved this for any others out there.
All the tools failed miserably.
Edit your registry: regedit.exe
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\DriverSearching
double tap the SearchOrderConfig on the right and change the DWORD value to either 1, 2 or 3
1 = Install all driver updates automatically
2 = Notify me about installing driver updates
3 = Never bother me again about driver updates <- this is what helped me finally.

I am more than capable of updating my own drivers if and when its needed, so i just went with 3 and windows has finally stopped installing this driver continuously.

Hope this helps others.

http://www.tenforums.com/drivers-hardware/52830-non-stop-recurring-driver-update.html
Relevancy 41.28%

I automatic USB install Solved: driver to Trying stop purchased a Diamond TV Wonder USB TV tuner I am running Vista on a Solved: Trying to stop automatic USB driver install Dell Inspiron desktop with gig of memory I first plugged the tuner into a USB port and booted the computer The Found New Hardware wizard appeared and I allowed it to search for and install a driver - big mistake After that nothing could find the tuner I went to the Device Manager found a device in one of the USB ports and uninstalled it I then booted let the system finish booting and then plugged in the tuner When the Found New Hardware box came up I clicked cancel I then loaded the software from the installation disk and selected install driver Than worked There are two software suites that the manual said will drive the tuner I first tried what came on the install disk - Arcsoft TotalMedia It worked fine and I could watch TV I then decided to see if Windows Media Center was better I ran Windows Media Center and it worked also but I liked TotalMedia better I tried to run TotalMedia but it said quot The device is not available or is being used by another application Please close any application that might be using the device and try again quot I then tried Windows Media Center again and got quot Tuner not installed Video cannot be displayed because no tuner hardware is properly installed and plugged in quot I have uninstalled the driver as per above but windows now installs something on boot up and that something does not work There was a post in with the same problem It was solved and the poster said it worked I cannot however read the solution I just get a note that the thread has expired and a suggestion that I resubmit the question Here I am I assume that if I could get to where all of the USB drivers that get automatically installed are listed and disable or delete the bandit driver I could reload the driver from the install disk Any suggestions -- Wally nbsp

Relevancy 41.28%

So on RTM build, you used to have these options:


But now, in TH2, you only have this:

Is anyone else annoyed that Microsoft seems to be PURPOSELY REMOVING more and more of users' choice...

Is it going to be like this every single update? If so, I'm done with Windows 10.

A:Option to stop automatic driver updates is GONE in TH2???

Hello Joe,

Selecting "No" will turn off device driver automatic installation.

Device Driver Automatic Installation - Turn On or Off in Windows 10

http://www.tenforums.com/windows-updates-activation/31275-option-stop-automatic-driver-updates-gone-th2.html
Relevancy 41.28%

Ok firstly a massive thanks to this forum.

Had random BSOD on a fresh 7 install, managed to use the debugging tool, find that it was the audio driver causing the issue and install manufacturers.

Went from 4 reboots per day to 0.

Until last night when it rebooted.

I check the device and it had reverted to the Microsoft drivers (previously realtek).

How can I stop windows updating that device?

A:Stop windows updating a specific driver

  
Quote: Originally Posted by danielowenuk


Ok firstly a massive thanks to this forum.

Had random BSOD on a fresh 7 install, managed to use the debugging tool, find that it was the audio driver causing the issue and install manufacturers.

Went from 4 reboots per day to 0.

Until last night when it rebooted.

I check the device and it had reverted to the Microsoft drivers (previously realtek).

How can I stop windows updating that device?


There should be an option to Ignore Update within the Windows Update console,i can find the exact path becasue im postponing an update

http://www.sevenforums.com/windows-updates-activation/54891-stop-windows-updating-specific-driver.html
Relevancy 41.28%

Hello nbsp I already created a Service Ticket but they couldn't help me with this problem We are testing several system with Windows and all an... random Intel M73 driver - stop M93: - graphics of them have the same problem The display driver keeps crashing and recovering but when this happens the screen freezes a few seconds and some programs crash because of it nbsp The error message is Display driver stopped responding and has recovered Display driver Intel HD Graphics Drivers for Windows R stopped responding and has successfully recovered nbsp I have tried latest drivers from Lenovo Windows Update Fresh Windows install or upgrade from Windows All have the same problem Also tried drivers directly from Intel but they wouldn't install saying I need the drivers from the manufacturer Lenovo nbsp Please update the graphics drivers for ThinkCentre Windows because this is really the only thing stopping us from M73 - M93: Intel graphics driver - random stop an... upgrading to Windows in our company nbsp Thank you Michel nbsp nbsp Mod nbsp edited title for clarity Solved Go to Solution

A:M73 - M93: Intel graphics driver - random stop an...

Welcome timmernet!1. May I know which ThinkCentre model it is?2. May I know which Intel HD version of drivers you downloaded from Intel support? Any screenshots from the failed installation of GPU drivers downloaded directly from Intel?
PeterThinkPad W520 | ThinkCentre E73 SFF | Yoga 11s | Yoga 3 Pro | Yoga 900 | Yoga Home 900 | Yoga Tablet 2 Pro | Miix 2 10" | IdeaPad Y460p | IdeaPad K1 | 3000 Y300 
Give kudos to reward people for their assistance | Mark thread solved if the solution works | I am an active volunteer, not an Lenovo employee
=====================================
List of Sound Enhancement Thread
W520 ; Dolby ; IdeaPad Slate Tablet ; Yoga 3 Pro ; X100e ; Vibe Shot ; Yoga 900

https://forums.lenovo.com/t5/ThinkCentre-A-E-M-S-Series/M73-M93-Intel-graphics-driver-random-stop-and-restart-HD4600/td-p/3277149
Relevancy 41.28%

Yes ever device or caused a by Stop driver error since I installed new RAM which I only today Stop error caused by a device or driver removed I ve been getting abrupt shutdowns particularly when running memory hogging programs but recently even for very small programs and eventually as windows itself is starting up This only seems to have subsided I haven t had the error yet since I removed all my RAM and replaced it a few minutes ago As a result of this problem I haven t been able to run a complete scan with Avira Antivirus or Spybot they both cause the crashes I included my error report information and the sysinfo please help me resolve this I d like to know whether the RAM is the problem and if there s any way I can test it or if I can continue to use this new RAM with some adjustment made -- anything you can do to help is appreciated BCCode a BCP C BCP BCP BCP EAEED OSVer SP Product C DOCUME KAITLY LOCALS Temp WER bb dir Mini - dmp C DOCUME KAITLY LOCALS Temp WER bb dir sysdata xml ------------------------------------------------------------------------- The second error report came back like this - below Corrupted error report Unfortunately the error report you submitted is corrupted and can t be analyzed Corrupted error reports are rare They can be caused by hardware or software problems and usually indicate a serious problem with your computer -------------------------------------------------------------------------- Tech Support Guy System Info Utility version OS Version Microsoft Windows XP Home Edition Service Pack bit Processor AMD Athlon tm XP x Family Model Stepping Processor Count RAM Mb Graphics Card Radeon X X Series Mb Hard Drives C Total - MB Free - MB Motherboard First International Computer Inc AU PCB x Serial number xxxxxx Antivirus AntiVir Desktop Updated Yes On-Demand Scanner Enabled nbsp

https://forums.techguy.org/threads/stop-error-caused-by-a-device-or-driver.990820/
Relevancy 41.28%

I'm having constant USB issues with my MSI a 3.0 USB Win-7 Premiun from x64 How Home updating driver stop I do Z U Plus board and I suspect that it could be the windows drivers and I was wondering how to stop windows from updating or installing them when I delete them so that I can only use the latest ones from the MSI website I have windows updates turned off so would it How do I stop Win-7 Home Premiun x64 from updating a USB 3.0 driver be as simple as just disconnecting the cat cable installing the MSI drivers and then connecting the cat cable again or would windows then try and mess with them again once online even though I have updates turned off I'm determined to resolve this but it sure is frustrating Sometimes works then it just hangs then it's slow and then it will give that msg that quot your device would work faster if plugged into a high speed usb port quot It's kind of all over the place and it doesn't what type of device is plugged into it as it does it with any and all devices I did disable able power management to the USB Hubs so that windows can not pick and chose when to or when not to supply power to them but that did not seem to do anything

A:How do I stop Win-7 Home Premiun x64 from updating a USB 3.0 driver

Well if you unplugged and then updated and plugged back in that should work since you have updates turned off what you can also try is when you go into action center under maintenance you can shut off driver status info and from there that should stop it as well. let me know how it goes.

http://www.sevenforums.com/hardware-devices/352612-how-do-i-stop-win-7-home-premiun-x64-updating-usb-3-0-driver.html