Windows Support Forum

BSOD & Freezing BCCode: deaddead.

Q: BSOD & Freezing BCCode: deaddead.

My laptop keeps freezing sometimes it recovers after a couple of minutes the last time it was around minutes before I forced it to restart Sometimes it's followed by a BSOD sometimes the BSOD deaddead. BCCode: Freezing BSOD & just comes unexpectedly The laptop is only BSOD & Freezing BCCode: deaddead. about a year or so old My first thoughts were to check the display drivers as that's the BSOD & Freezing BCCode: deaddead. usual culprit but they're up to date I've done windows updates too I'm a bit worried that it might be a hardware issue This is the system error that I get when BSOD & Freezing BCCode: deaddead. my laptop has restarted after the BSOD Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode deaddead BCP F B BCP B BCP A CE BCP B E OS Version Service Pack Product I have included my zip as per posting instructions at the top of the forum If you need any more information let me know and thanks in advance for any help you can give Fingers crossed it's just a small issue x

Relevancy 100%
Preferred Solution: BSOD & Freezing BCCode: deaddead.

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: BSOD & Freezing BCCode: deaddead.

Hi ClaireDC.

BugCheck DEADDEAD means MANUALLY_INITIATED_CRASH1.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

MANUALLY_INITIATED_CRASH1 (deaddead)
The user manually initiated this crash dump.
Arguments:
Arg1: 000000000f00004b
Arg2: 0000000001a700ac
Arg3: 0000000012a622ce
Arg4: 000000006b84005e
But here we are seeing some intel WiFi driver is causing some issues there.

Code:
BugCheck DEADDEAD, {f00004b, 1a700ac, 12a622ce, 6b84005e}

Probably caused by : NETwNs64.sys ( NETwNs64+1f619b )

Followup: MachineOwner
---------
And the driver is old.

Code:
fffff880`06809000 fffff880`0733f000 NETwNs64 T (no symbols)
Loaded symbol image file: NETwNs64.sys
Image path: \SystemRoot\system32\DRIVERS\NETwNs64.sys
Image name: NETwNs64.sys
Timestamp: Fri Dec 02 12:20:55 2011 (4ED8754F)
CheckSum: 00AE9BA3
ImageSize: 00B36000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
You have two options here.

1. Update the driver yourself from https://downloadcenter.intel.com/default.aspx

2. upload your MSINFO32.nfo file so that we can help you to find the appropriate driver.
Click on the start button
Type "msinfo32" (without quotes) in the search bar of the start menu, click the resulting link. It will open the System Information window.
File>Save. In the "File Name" filed, put "MSINFO32" (without Quote), give the save location to desktop, and click the "save" button.
Give the time for processing, it will save a .nfo file on your desktop.
Zip it, and upload it following the instruction.

http://www.sevenforums.com/bsod-help-support/307020-bsod-freezing-bccode-deaddead.html
Relevancy 98.9%

I had a recent BSOD I want to diagnose. This forum has been great with helping me in the past so I am posting here again.

I've been having issues with SF Diagnostic, but I attached the minidump file.

I'm suspecting the BSOD has to do with one or more of the following: video card, wifi driver, and utorrent.

Below is the message I got upon reboot:

=================================================================================

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: deaddead
BCP1: 000000000F000101
BCP2: 000000000023002C
BCP3: 0000000012A70000
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\110613-33119-01.dmp
C:\Users\Joseph Lee\AppData\Local\Temp\WER-71464-0.sysdata.xml

=================================================================================

A:BSOD, BCCode: deaddead

Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable!

ASMMAP64.sys Thu Jul 2 15:13:26 2009 (4A4C7A36)
LENOVO ATK Hotkey ATK0101 ACPI UTILITY (also found in Asus systems)
Driver Reference Table - ASMMAP64.sys

NETwNs64.sys Mon Jan 9 15:44:39 2012 (4F0AB707)
Intel(R) Wireless WiFi Link 5000 Series Adapter Driver for Windows 7
Driver Reference Table - NETwNs64.sys

If no updates are available, please uninstall the software with revo.Revo Uninstaller "Free"Use Revo Uninstaller to uninstall stubborn software. Opt for Advance Mode while uninstalling. This allows you to remove leftover registry entries of the software.Link to download: Download Revo Uninstaller Freeware - Free and Full Download - Uninstall software, remove programs, solve uninstall problems
AI Charger is a known cause of BSOD's. Please remove it with revo as well.

AiCharger.sys Fri Sep 23 08:04:40 2011 (4E7BE938)
Asus Charger Driver [br] Likely BSOD cause
Driver Reference Table - AiCharger.sys
Virus Check:Make scans with these tools below:TDSSKiller Rootkit Removal Utility Free Download | Kaspersky Lab US
Online Virus Scanner Eset
Application conflict:Reduce the start-up items. This will help avoid software conflicts:Remove Startup Programs in Windows 7
Clean Startup in Windows 7
System File CheckerThe SFC /SCANNOW Command - System File Checker scans the integrity of all protected Windows 7 system files and replaces incorrect corrupted, changed/modified, or damaged versions with the correct versions if possible. If you have modified your system files as in theming explorer/system files, running sfc /scannow will revert the system files to it's default state.Link to full tutorial: SFC /SCANNOW Command - System File Checker
Run Disk Check in Windows 7Run this on your Hard Drive(s). This will show you how to run Check Disk or chkdsk in Windows 7 to check a selected hard disk for file system errors and bad sectors on it. With both boxes checked for all HDDs and with Automatically fix file system errors. Post back your logs for the checks after finding them using Check Disk (chkdsk) - Read Event Viewer LogLink to full tutorial: Disk Check
Microsoft Security Essentials & the Free version of Malwarebytes, update and make full scans separately:Uninstallers (removal tools) for common antivirus software - ESET Knowledgebase
Help protect your PC with Microsoft Security Essentials
Malwarebytes Free



   Note
Do not start the trial version of MalwareBytes

Also take a look at: Good & Free System Security Combination
Use Crystal Disk Info to upload a screenshot of your Hard Drives (s).Then test your Hard Drives (s) running a Hard Drive Diag.

Test and Diagnose RAM issues with MEMTEST86+Pay close attention to Part 3 of the tutorial "If you have errors". Take the test for at least 7-10 passes. It may take up to 22 passes to find problems.Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold. RAM - Test with Memtest86+
Check for heating issues using Speccy or HWmonitorHWMonitor CPUID - System & hardware benchmark, monitoring, reporting
Speccy - System Information - Free DownloadPlease upload a summary tab using Speccy. Screenshots and Files - Upload and Post in Seven Forums

Code:
Built by: 7601.18247.amd64fre.win7sp1_gdr.130828-1532
Debug session time: Thu Nov 7 04:49:47.559 2013 (UTC + 6:00)
System Uptime: 9 days 0:18:09.035
BugCheck DEADDEAD, {f000101, 23002c, 12a70000, 0}
*** WARNING: Unable to verify timestamp for NETwNs64.sys
*** ERROR: Module load completed but symbols could not be loaded for NETwNs64.sys
Probably caused by : ... Read more

http://www.sevenforums.com/bsod-help-support/310907-bsod-bccode-deaddead.html
Relevancy 98.04%

Hey,

I got this error whilst away from my computer. Programs open were spotify, connectify, and maybe some other things. Error as follows:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 2057

Additional information about the problem:
BCCode: deaddead
BCP1: 000000000F010012
BCP2: 0000000001A700AC
BCP3: 0000000012BC0000
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\010914-19422-01.dmp
C:\Users\Tim\AppData\Local\Temp\WER-92726-0.sysdata.xml

Hasn't happened before. New laptop, Lenovo x230, though I had dropped it and had the harddrive replaced.

Thanks for any help

A:BSOD away from computer BCCode: deaddead

Post it following the Blue Screen of Death (BSOD) Posting Instructions.

http://www.sevenforums.com/bsod-help-support/317788-bsod-away-computer-bccode-deaddead.html
Relevancy 96.75%

Hello everybody,
i got this Bluescreen while playing Cod4 online.
i got a new notebook: MSI GE60-i789W7H

this is my errorpost after the restart:

Problemsignatur:
Problemereignisname: BlueScreen
Betriebsystemversion: 6.1.7601.2.1.0.768.3
Gebietsschema-ID: 1031

Zusatzinformationen zum Problem:
BCCode: deaddead
BCP1: 000000000F010012
BCP2: 000000000023002C
BCP3: 0000000012BC0000
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Dateien, die bei der Beschreibung des Problems hilfreich sind:
C:\Windows\Minidump\080712-20358-01.dmp
C:\Users\Dr_Freeman\AppData\Local\Temp\WER-70356-0.sysdata.xml

Lesen Sie unsere Datenschutzbestimmungen online:
Windows 7-Datenschutzbestimmungen - Microsoft Windows

Wenn die Onlinedatenschutzbestimmungen nicht verf?gbar sind, lesen Sie unsere Datenschutzbestimmungen offline:
C:\windows\system32\de-DE\erofflps.txt
sorry got the os in german! i?ve attached the sevenforums zip

greets
DrFreeman

Relevancy 94.6%

BCP2: 000000000023002C
BCP3: 0000000012A60000
BCP4: 0000000000000000

I noticed youtube and reddit were running slow and then it blue screened randomly twice with the same error message.

A:BSOD BCCode: deaddead BCP1: 000000000F00004B (Samsung Laptop)

The stop code you are receiving, in both dump files provided indicates a manually initiated crash, however at the same time the dump files are also blaming your wireless driver:


Code:
*** WARNING: Unable to verify timestamp for NETwNs64.sys
*** ERROR: Module load completed but symbols could not be loaded for NETwNs64.sys
ERROR: FindPlugIns 80070005
ERROR: Some plugins may not be available [80070005]
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck DEADDEAD, {f00004b, 23002c, 12a60000, 0}

Probably caused by : NETwNs64.sys ( NETwNs64+a6fdf )

Followup: MachineOwner
---------
Driver Reference Table - NETwNs64.sys

Looking at the time stamp on the driver we can see it is likely outdated:

Code:
kd> lmvm NETwNs64
start end module name
fffff880`0927e000 fffff880`09db4000 NETwNs64 T (no symbols)
Loaded symbol image file: NETwNs64.sys
Image path: \SystemRoot\system32\DRIVERS\NETwNs64.sys
Image name: NETwNs64.sys
Timestamp: Fri Dec 02 01:50:55 2011 (4ED8754F)
CheckSum: 00AE9BA3
ImageSize: 00B36000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Please update your wireless driver from here: https://downloadcenter.intel.com/Default.aspx

http://www.sevenforums.com/bsod-help-support/295824-bsod-bccode-deaddead-bcp1-000000000f00004b-samsung-laptop.html
Relevancy 82.13%

Hello experts,
My computer is facing BSOD. It shuts down randomly. Below are the error details:

Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033
Additional information about the problem:
BCCode: deaddead
BCP1: 000000000F00004B
BCP2: 000000000125025B
BCP3: 0000000012A60000
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\121614-60341-01.dmp

Here are my computer specs:
Samsung RV 511
Windows 7 Professional 64 bit
Processor: I3 M380 @2.53 GHz
Ram: 8GB

I tried opening the dump file but it shows weird charaters. I have uploaded the file for reference. Can somebody please help me resolve this issue?

Greatly appreciate the help

Thanks,
CM88

A:BlueScreen Locale ID 1033 BCCode deaddead....please help!

Try to go back ...using system restore

http://www.sevenforums.com/bsod-help-support/379002-bluescreen-locale-id-1033-bccode-deaddead-please-help.html
Relevancy 59.77%

I've completely reinstalled my system from the ground up twice over this last weekend. Still gettin the BSOD's at least daily. Here's a zip of the latest dump. It seems to really only BS when I'm running high bandwith/ memory. I.E. videogames/teamspeak/Pandora simultaneously

My system is an

ASUSm5a99xevo MB
16GB RAM
Radeon HD 7850
And anf FX 6core AMD

A:BSOD during high bandwith situations. Bccode a, bccode b1.

Welcome

You seem to be having lot of USB errors. What's connected to your USB?

Consider uninstalling AVG, it contributes in BSODs.
AVG | Download tools and utilities

Recommended antivirus program for Windows 7 based on stability compared to others:-
Microsoft Security Essentials - Free Antivirus for Windows
Malwarebytes - The Free version
Good and Free system security combination.
Run a full scan with both (separately) once downloaded, installed and updated.

See if these tutorials are helpful:USB Selective Suspend - Turn On or Off
USB Driver - General Fix for Problems

Keep us posted

http://www.sevenforums.com/bsod-help-support/260239-bsod-during-high-bandwith-situations-bccode-bccode-b1.html
Relevancy 58.48%

x full retail around year old comp The memory I use on my PC is quot Corsair TWIN X - C D Dominator GB X GB PC BSOD from BCCode:fc memory BCCode:d1 card, new & - MHz -Pin DDR CL Dual Channel Desktop Memory quot Wanting more memory I decided to to place BSOD from new memory card, BCCode:d1 & BCCode:fc quot OCZ DDR PC - Platinum GB Edition Dual Channel EOL quot Since they had the same specs for frequency and BSOD from new memory card, BCCode:d1 & BCCode:fc clock I thought they'll work fine together But I tend to keep getting BSODs when i run my computer with both of them inside Here is the BSOD which has occurred to me Additional information about the problem BCCode fc BCP FFFFF B E BCP FA A BCP FFFFF A FF C BCP OS BSOD from new memory card, BCCode:d1 & BCCode:fc Version Service Pack Product Thanks for the help Additional information I ran the BSOD Dump amp System File Collection app and SystemHealth without the nd memory card since the PC would crash Additional information when it BSODed i opened the CPU and the memory cards were very hot if that helps

A:BSOD from new memory card, BCCode:d1 & BCCode:fc

Mixing RAM, especially from different brands, isn't exactly the best thing. Plus, why is the OCZ RAM EOL (End of Life)? Typically when they are labeled that it usually means it has been superseded by an identical but superior (and often times more stable) version. It may be just that they're old (they are DDR2) but the aforementioned reasons are also possible. Check to confirm if there are similar or nearly identical versions. It may even be just bad memory you managed to purchase and needs to be replaced.

Have you checked your motherboard to confirm that both sets of RAM are compatible? Does things run fine if you only run with one or the other but not with both?

Memory can handle temps pretty well. If you suspect it may be too hot, then it's often caused by the internal temperature of the case being too hot (this also is displayed in the motherboard's temp as well). Make sure that your case has proper airflow going through it to prevent heat from accumulating.

For additional attempts at fixing this, you can try a BIOS update for your motherboard. Go to the Gigabyte website and download any possible update for your specific motherboard model. Note that it is imperative that your system be stable during the BIOS update, so reduce the amount of RAM in your system to only one set of memory if you know that will stabilize things and then run the update. Lastly, for any memory testing you may use Memtest86+. Sure beats waiting for your system to BSOD.

http://www.sevenforums.com/bsod-help-support/222467-bsod-new-memory-card-bccode-d1-bccode-fc.html
Relevancy 56.33%

play computer games during day and sleeping at night. forget to windows key + L during the night so that the system doesnt get that affected by errors and programs. what do i need to do? i downloaded the sf diagnostic tool and grab all function. where do i post it?

A:three different BSOD during 2 nights bccode 1A and bccode 24 and D1

Post it following the Blue Screen of Death (BSOD) Posting Instructions.

Screenshots and Files - Upload and Post in Seven Forums

http://www.sevenforums.com/bsod-help-support/298017-three-different-bsod-during-2-nights-bccode-1a-bccode-24-d1.html
Relevancy 52.89%

Hi,

I have W7, Samsung RC730, 8GB RAM, Nvidia 540, 64bit and my laptop is experiencing random bluescreen restarts. Not sure what to do this, it's driving me crazy and it's not good for PC that this is happening neither.

Windows has recovered from an unexpected shutdown

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: deaddead
BCP1: 000000000F00004B
BCP2: 000000000023002C
BCP3: 0000000030400000
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\102912-33072-01.dmp
C:\Users\VR\AppData\Local\Temp\WER-60216-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\windows\system32\en-US\erofflps.txt
I'm attaching both files:
C:\Windows\Minidump\102912-33072-01.dmp
C:\Users\VR\AppData\Local\Temp\WER-60216-0.sysdata.xml

Would be great if anyone could help out. Thanks!

A:DeadDead

Based on the instructions found here I'm also attaching BSOD file collections from Windows7_Vista_jcgriff2 and System Health Report

Based on the instructions found here, I'm also attaching neccessary files, please download updated DeadDead.rar

? OS - Vista/ Windows 7 - Win 7, Home Premium 6.1.7601 Service Pack 1
? x86 (32-bit) or x64 ? - 64 bit
? What was original installed OS on system? - Win 7
? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)? - Preinstalled, OEM
? Age of system (hardware) - 1 year
? Age of OS installation - have you re-installed the OS? - 1 year, no haven't reinstalled yet

? CPU - i7-2630QM
? Video Card - NVIDIA? Geforce? GT 540M (Optimus)
? MotherBoard - Intel Chipset HM65 Express? Power Supply - brand & wattage - ? - 90W power supply

? System Manufacturer
? Exact model number (if laptop, check label on bottom) Samsung RC730 - S05DE
Review Samsung RC730-S05DE Notebook - Notebookcheck.net Reviews

http://www.techsupportforum.com/forums/f299/deaddead-673086.html
Relevancy 52.03%

Hard drive failed in late October, replaced with SSD.

Started getting BSOD whenever doing anything graphical (flash in a web browser, or a game) in November. Tried Driver Fusion (|MG| Driver Fusion (Driver Sweeper) 1.4.0 Download) and installiing older NVIDIA drivers, this reduced the freqquency of BSODs to the point where they'd only happen roughly once a night and I could mostly ignore it.

Any help diagnosing would be greatly appreciated. My thoughts are replacing motherboard and RAM, I suspect driver controller might be to blame.

A:BSOD:: BCCode: 116; BCCode: f4 (mostly f4)

Did you make sure to update the firmware for your SSD and update your drive controller & chipset drivers as well as the BIOS? All of those elements are involved with drive operations compatibility patches are often added to them to ensure your SSD is compatible with your system.

Yes, these all seem to be involved with your SSD drive. There are crashes occurring because during disk I/O operations the storage device being accessed ended up missing, typically due to failure to respond to the OS. I cannot ascertain from these tiny minidumps what storage device it's trying to access, nor can I discern if it's even attempting to access a legitimate device and isn't just scrambling the device object number. However I can say it fits the bill with common SSD issues that stem from incompatibility or just plain bad SSD drives. Again, make sure all the aforementioned items are up-to-date.

What SSD do you have? Certain brand names like Samsung (considered best so far) and Crucial are often reliable, and some - like OCZ and Rosewill - are about as much a gamble as winning the lottery. Brand name makes a big difference when it comes to reliability, so it would be best to pick your options wisely. Even so, even the most reliable brands can still churn out a dirty drive or two, that's to be expected.

Analysts:

Consistent pattern in the crashdumps are c000000e NTSTATUS errors residing in the crashing thread's callstack. The error means the device attempted to access does not exist. Again, as stated before, minidumps don't hold info on the specified device.


Code:
CRITICAL_OBJECT_TERMINATION (f4)
A process or thread crucial to system operation has unexpectedly exited or been
terminated.
Several processes and threads are necessary for the operation of the
system; when they are terminated (for any reason), the system can no
longer function.
Arguments:
Arg1: 0000000000000003, Process
Arg2: fffffa8007013b30, Terminating object
Arg3: fffffa8007013e10, Process image file name
Arg4: fffff80003392460, Explanatory message (ascii)

Debugging Details:
------------------

----- ETW minidump data unavailable-----
TRIAGER: Could not open triage file : C:\Program Files (x86)\Windows Kits\8.0\Debuggers\x64\triage\modclass.ini, error 2

PROCESS_OBJECT: fffffa8007013b30

IMAGE_NAME: csrss.exe

DEBUG_FLR_IMAGE_TIMESTAMP: 0

MODULE_NAME: csrss

FAULTING_MODULE: 0000000000000000

PROCESS_NAME: csrss.exe

EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

BUGCHECK_STR: 0xF4_fffff800c0000005

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

CURRENT_IRQL: 0

STACK_TEXT:
fffff880`066d7e38 fffff800`0341a822 : 00000000`000000f4 00000000`00000003 fffffa80`07013b30 fffffa80`07013e10 : nt!KeBugCheckEx
fffff880`066d7e40 fffff800`033c6e0b : ffffffff`ffffffff fffffa80`06b24640 fffffa80`07013b30 fffffa80`07013b30 : nt!PspCatchCriticalBreak+0x92
fffff880`066d7e80 fffff800`03345f04 : ffffffff`ffffffff 00000000`00000001 fffffa80`07013b30 00000000`00000008 : nt! ?? ::NNGAKEGL::`string'+0x176e6
fffff880`066d7ed0 fffff800`03092253 : fffffa80`07013b30 fffff800`c0000005 fffffa80`06b24640 00000000`01cc0700 : nt!NtTerminateProcess+0xf4
fffff880`066d7f50 fffff800`0308e810 : fffff800`030ddb7f fffff880`066d8a38 fffff880`066d8790 fffff880`066d8ae0 : nt!KiSystemServiceCopyEnd+0x13
fffff880`066d80e8 fffff800`030ddb7f : fffff880`066d8a38 fffff880`066d8790 fffff880`066d8ae0 00000000`01cc2210 : nt!KiServiceLinkage
fffff880`066d80f0 fffff800`03092642 : fffff880`066d8a38 00000000`000713b8 fffff880`066d8ae0 00000000`01cc1ce8 : nt! ?? ::FNODOBFM::`string'+0x488a4
fffff880`066d8900 fffff800`030911ba : 00000000`00000001 00000000`01cc0e18 00000000`77488d01 00000000`000713b8 : nt!KiExceptionDispatch+0xc2
fffff880`066d8ae0 00000000`77378e3d : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiPageFault+0x23a
00000000`01cc0e20 00000000`00000000 : 00000000`00000000 0000... Read more

http://www.sevenforums.com/bsod-help-support/271940-bsod-bccode-116-bccode-f4-mostly-f4.html
Relevancy 50.31%

hi...folks....
i do have a big problem in my windows7...and this is the problem..



Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: deaddead
BCP1: 0000000000000000
BCP2: 0000000000000000
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\060611-15990-01.dmp
C:\Users\ACETHEPRINCE\AppData\Local\Temp\WER-30279-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows



any idea to solve this

A:Windows7 Blue Screen error - Bugcheck = 'deaddead'

Interesting bugcheck - deaddead

If you can boot the system -

Run Driver Verifier - Driver Verifier - Windows 7 & Vista (BSOD-related)

Driver Verifier needs to run 24 hours minimum or until it BSODs your system, whichever is less. Then . . .

Provide full system info - Blue Screen of Death (BSOD) Posting Instructions - Windows 7 & Vista

Regards. . .

jcgriff2

`

http://www.techsupportforum.com/forums/f299/windows7-blue-screen-error-bugcheck-deaddead-578837.html
Relevancy 49.45%

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.48
Locale ID: 1033

Additional information about the problem:
BCCode: 124
BCP1: 0000000000000000
BCP2: FFFFFA8004B46038
BCP3: 00000000B6200049
BCP4: 000000000102010A
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\062110-18969-01.dmp
C:\Users\noel doyle\AppData\Local\Temp\WER-43227-0.sysdata.xml

Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.48
Locale ID: 1033

Additional information about the problem:
BCCode: 124
BCP1: 0000000000000000
BCP2: FFFFFA8004B46038
BCP3: 00000000B6200049
BCP4: 000000000102010A
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\062110-18969-01.dmp
I created windows sky drive for the minidump files
http://cid-65375d43ed339adf.office.live.com/browse.aspx/crash information

 

A:BSOD BCCode: 124 apparently random BSOD doing all different activity

I had the same problem after upgrading my laptop (touchscreen) from Win Vista (which came from HP) to Win 7 (both were 64-bit.)

Removed the "Authentica Digital Fingerprint Reader" software, and used the built-in Win7 drivers, and that cleared it up for me. Not sure if it was a bug in the 3rd party drivers, or a conflict between them and the Win7 drivers, but I haven't gotten a BSOD since I removed it.
 

https://forums.techguy.org/threads/bsod-bccode-124-apparently-random-bsod-doing-all-different-activity.931145/
Relevancy 47.73%

Hello I started to get BSOD when I upload video to youtube and downloading torrents with Utorrent I go to bed and when I sleep it's restart and give me this errors Quote Problemsignatur Navn p problemhendelse BlueScreen OS-versjon ID for nasjonal innstilling Tilleggsinformasjon om problemet BCCode d BCP BCP BCP BCP FFFFF EA B OS Version Service Help please! d1?!? BCCode: BSOD Pack Product Filer som bidrar til beskrive problemet C Windows Minidump - - dmp C Users Anderwin AppData Local Temp WER- - sysdata xml Les v r personvernerkl ring p Internett Personvernerkl ring for Windows - Microsoft Windows Hvis personvernerkl ringen p Internett ikke er tilgjengelig kan du lese personvernerkl ringen frakoblet C BSOD Help please! BCCode: d1?!? Windows system nb-NO erofflps txt OS Windows -bit The pc was upgraded around years ago The hardware but this problem started yesterday BSOD Help please! BCCode: d1?!? Geforce GTX ASUS P T DELUXE V Version xx I CPU GH I can't find out of the power supply but is not a laptop Everything have BSOD Help please! BCCode: d1?!? worked for years and this is my first BSOD I have reinstalled the Windows like three times because I try do it once in year I use Spyware Doctor with anti-virus and that firewall I can use Utorrent when I game even use Skype But when I leave the pc and the pc is lock it restart after some hours When I don't use it I have tested the ram with the program called Memtest it pass without errors I scanned my hard-drive Seagate with the Seagate dos program nothing error with long and short test Run Driver Verifier I have nothing wrong here either Nothing happening It's restart and never show BSOD So why is this happening to me I have used BSOD Windows Vista v jcgriff and downloaded the autoruns exe The files is inside a zip file some are attachment to the post I hope there can help me Because It's made me mad when I never got this codes before The pc just restart and I can't see the BSOD I log in and I know is have restarted because I got the error messengers pops up and I need to log in again I go to bed uploading video to youtube and use Utorrent I can do this when I'm on the PC without problems Play games downloading Utorrent Skype with friends and so on Please help PS I have scanned the pc for virus nothing I used spy ware and malewarebytes to do it Edit Speccy link http speccy piriform com results J TnOBLo bQiRHHs Edit Added Autoruns files

A:BSOD Help please! BCCode: d1?!?

turn of the computer then take the side off and check inside the power supply usually has some label on it with a name and the wattage,I would also remove utorrent

http://www.techsupportforum.com/forums/f299/bsod-help-please-bccode-d1-671994.html
Relevancy 47.73%

Hello everyone,

i have got a problem on my laptop, nowadays it start giving bluescreen error too much, right now i am on safe mode on the other laptop and cant boot in normal mode,

OS Win 7 Home Premium 64bit
Laptop HP Pavilion dv7t-3100

the problems that i find in safe mode

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1055

Additional information about the problem:
BCCode: 116
BCP1: FFFFFA8007345010
BCP2: FFFFF8800FC2B034
BCP3: 0000000000000000
BCP4: 0000000000000002
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

what could be the reason for this? is it possible to fix this problem?

thanks for help in advance!

A:BSOD BCCode: 116

after creating this topic i find how to make Blue Screen of Death (BSOD) Posting Instructions, so i used the tool SF_Diagnostic_Tool to create folder of dmp files and i named it my username accordingly.

thanks

http://www.sevenforums.com/bsod-help-support/318019-bsod-bccode-116-a.html
Relevancy 47.73%

Hi, I'm really sorry but I don't know how to get the BSOD dump - I'm quite a computer novice. My laptop's relatively new (2 months) and I've had BSOD problems since I got it. They were always BCCode 7f before, and it was recommended I got rid of ZoneAlarm which seemed to help. But then today I got this new BSOD with a new BCCode 1a. (I've noticed some problems when playing music and the sound crackles for a second - may it could be something to do with this?) Thank you very much for any help you can give

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 2057

Additional information about the problem:
BCCode: 1a
BCP1: 0000000000041790
BCP2: FFFFFA800325D700
BCP3: 000000000000FFFF
BCP4: 0000000000000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1

A:BSOD BCCode 1a

http://www.sevenforums.com/crashes-d...tructions.html

http://www.sevenforums.com/bsod-help-support/128110-bsod-bccode-1a.html
Relevancy 47.73%

Hi, I've been having BSODs about every few days since about 1 month ago. Tried using WinDbg myself but not finding anything that seems to point to the problem. The BSOD I'm getting is:

DRIVER_IRQL_NOT_LESS_OR_EQUAL, with bccode d1

The dump points the problem to tcpip.sys (tcpip+48e6a). Also, attached are a few of my recent crash dumps.

I'm on Windows 7 x64.

Appreciate anyone who could help me solve my problem! Thanks in advance!
 

A:BSOD on Win 7 x64, bccode d1

It sounds like you have buggy driver or software have you installed anything before this happened.

If want to check your minidumps download something called bluescreenview.

You can download it here
http://www.fiberdownload.com/Download/19771/BlueScreenView
 

http://www.techspot.com/community/topics/bsod-on-win-7-x64-bccode-d1.159492/
Relevancy 47.73%

my computer restarts itself everyday. can someone help me solve my problem?

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: d1
BCP1: 0000000000989690
BCP2: 0000000000000002
BCP3: 0000000000000000
BCP4: FFFFF880028E6F61
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\072110-20576-01.dmp
C:\Users\jody\AppData\Local\Temp\WER-31434-0.sysdata.xml

Read our privacy statement online:


If the online privacy statement is not available, please read our privacy statement offline:
 

A:BSOD BCCode: d1

0xD1 errors are usually caused by faulty drivers but there isn't enough information given at this time to make even an educated guess. When do these Blue Screens occur, i.e. are you doing anything in particular?
 

http://www.techspot.com/community/topics/bsod-bccode-d1.150380/
Relevancy 47.73%

One of my users at work saved a printscreen after receiving multiple BSOD's - apparently happening after laptop sleeps, but also out of the blue as well.

System:

DELL vostro
Win7 ENT x64 SP1
Full Retail version installed from disc (came loaded with win7 home, clean install to win7 enterprise)

Thanks in advance - I did do a restore to remove most recent install (adobe flash update) and have removed AVG and replaced with trendmicro today.

A:BSOD BCCode: 9f

Based on the dumps looks like possible audio driver and then I had nusb3xhc.sys as culprit which is some USB 3.0 controller. I would uninstall audio driver, reinstall it and also reinstall chipset drivers from dell site.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa8003c5ba10, fffff80004582748, fffffa8006c17c60}

Probably caused by : pci.sys

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

DRIVER_POWER_STATE_FAILURE (9f)
A driver is causing an inconsistent power state.
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: fffffa8003c5ba10, Physical Device Object of the stack
Arg3: fffff80004582748, Functional Device Object of the stack
Arg4: fffffa8006c17c60, The blocked IRP

Debugging Details:
------------------
DRVPOWERSTATE_SUBCODE: 3

IMAGE_NAME: pci.sys

DEBUG_FLR_IMAGE_TIMESTAMP: 4ce7928f

MODULE_NAME: pci

FAULTING_MODULE: fffff88000fb4000 pci

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

BUGCHECK_STR: 0x9F

PROCESS_NAME: System

CURRENT_IRQL: 2

STACK_TEXT:
fffff800`045826f8 fffff800`02f33092 : 00000000`0000009f 00000000`00000003 fffffa80`03c5ba10 fffff800`04582748 : nt!KeBugCheckEx
fffff800`04582700 fffff800`02ed095c : fffff800`04582830 fffff800`04582830 00000000`00000000 00000000`00000001 : nt! ?? ::FNODOBFM::`string'+0x34040
fffff800`045827a0 fffff800`02ed07f6 : fffff800`0306ff00 00000000`00160459 00000000`00000000 00000000`00000102 : nt!KiProcessTimerDpcTable+0x6c
fffff800`04582810 fffff800`02ed06de : 00000034`68b0aab0 fffff800`04582e88 00000000`00160459 fffff800`0303dda8 : nt!KiProcessExpiredTimerList+0xc6
fffff800`04582e60 fffff800`02ed04c7 : fffffa80`03ca4bc1 fffff800`00160459 00000000`00000001 00000000`00000058 : nt!KiTimerExpiration+0x1be
fffff800`04582f00 fffff800`02ec8e05 : 00000000`00000000 fffffa80`03c56680 00000000`00000000 fffff880`04412588 : nt!KiRetireDpcList+0x277
fffff800`04582fb0 fffff800`02ec8c1c : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KyRetireDpcList+0x5
fffff880`037418c0 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiDispatchInterruptContinue
STACK_COMMAND: kb

FOLLOWUP_NAME: MachineOwner

FAILURE_BUCKET_ID: X64_0x9F_3_HDAudBus_IMAGE_pci.sys

BUCKET_ID: X64_0x9F_3_HDAudBus_IMAGE_pci.sys

Followup: MachineOwner
---------

http://www.sevenforums.com/bsod-help-support/229243-bsod-bccode-9f.html
Relevancy 47.73%

Hi,

Im v.troubled cos this is the PC that i've bulit up quite some time ago. Before i have the 116 error i have the BCCODE 124 error.

So what i did was i uninstall my Graphics Driver and install my MSI graphics Driver back this time i download the drivers from MSI not from NVIDIA.

I can go into Safe mode for a long time without any BSOD But when i log into windows after awhile i will BSOD tried to ask help from my local forum but no reply Zzzz.

Attachment 234798

Im new here so pls guide me along in this forum

Thank you

Best Regards
H.sHon

A:Bsod bccode 116

Welcome

You need to get the latest drivers for your NVIDIA card.

Code:
2: kd> lmvm nvlddmkm
start end module name
fffff880`0f82d000 fffff880`104a4000 nvlddmkm T (no symbols)
Loaded symbol image file: nvlddmkm.sys
Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
Image name: nvlddmkm.sys
Timestamp: Sat Oct 15 12:07:55 2011 (4E99233B)
CheckSum: 00C61687
ImageSize: 00C77000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Download and install Driver Sweeper:
→ |MG| Driver Fusion (Driver Sweeper) 1.2.0 Download
Select option 2 for NVIDIA.
→ Drivers - Download NVIDIA Drivers
Boot into Safe Mode from Advanced Boot Options:
→ Advanced Boot Options
Type in Driver Fusion in Search
Remove all components/drivers of your NVIDIA drivers
Boot normally now, and install the latest drivers from the
auto-detect program you downloaded.
(Requires Java)

For more information go through this guide:
→ STOP 0x116: VIDEO_TDR_ERROR troubleshooting

Good luck

http://www.sevenforums.com/bsod-help-support/256283-bsod-bccode-116-a.html
Relevancy 47.73%

Hi folks I was just looking around the internet when it gave a BSOD I cried BSOD BCCode 50 for hours So i googled and came on this website searching didnt really work out cause im not that smart at windows Edit I keep getting it as soon as i log in to windows Another account didnt work either Safe mode works luckily I'll try to attach the tjgriff-thing but perfmon report-thing didnt work out I'll quote Quote bad image Error An error occured while attempting to generate the report The system cannot find the path specified And here's the list of some stuff from my computer Quote OS - win x i believe not sure What was original installed OS on system - Self-build only had win Is the OS an OEM version - OS OEM Where to BSOD BCCode 50 find that Age of system hardware - fhew months Age of OS installation - fhew months CPU X Mushkin silver line GB Video BSOD BCCode 50 Card ASUS EAH MotherBoard MSI O A-C B - LGA Socket Power Supply - Be quiet BTQ L - w Thanks in advance

A:BSOD BCCode 50

Also, if i start my computer and check CPU temperature, it sais it's around 80 degrees Celsius already. Also if i just star my computer after letting it rest for hours. Just saying, already have that from the beginning could be a failure in temperature-measuring...

http://www.techsupportforum.com/forums/f299/bsod-bccode-50-a-589902.html
Relevancy 47.73%

Can some kind soul please help me.










Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 1a
BCP1: 00008884
BCP2: 840F8FE4
BCP3: 845FA000
BCP4: 00000502
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\040611-13135-01.dmp
C:\Users\User\AppData\Local\Temp\WER-22557-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

A:BSOD BCCode: 1a

Processor: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40ghz
Installed memory: 2GB
System type: 32-bit Operating System






Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 1a
BCP1: 00008884
BCP2: 840F8FE4
BCP3: 845FA000
BCP4: 00000502
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\040611-13135-01.dmp
C:\Users\User\AppData\Local\Temp\WER-22557-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt[/QUOTE]

http://www.sevenforums.com/bsod-help-support/157249-bsod-bccode-1a.html
Relevancy 47.73%

Hi i have a toshiba satellite R - R and i the last days i get the blue screen error I get the BSOD fe - BCCode error while i have open only the internet explorer The info from the error report are Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode fe BCP BCP BCP BCP FFFFFA FCB OS Version Service Pack Product Files that help describe the problem C Windows Minidump - - dmp C Users Yiannis AppData Local Temp WER- - BSOD - BCCode fe sysdata xml Read our privacy statement online Windows Privacy Statement - Microsoft Windows If the online privacy statement is not available please read our privacy statement offline C Windows system en-US erofflps txt I am attaching the dmp file and the xml file as an error report zip I also used the BSOD Dump amp System File Collection app and the system helth report and i am attachning the zip file I also attach a jpeg with the system info Windows home bit OEM The laptop is months old I need help How do i solve my problem

A:BSOD - BCCode fe

hi, does anyone have any clue about my problem?
Do you need any additional info?

My laptop is still under warranty. Should i take it to Toshiba and ask them to have a look at it?

http://www.sevenforums.com/bsod-help-support/191318-bsod-bccode-fe.html
Relevancy 47.73%

Getting BSOD since yesterday, no new hardware has been installed and what not.

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: 1a
BCP1: 0000000000003452
BCP2: 000000000D95C000
BCP3: FFFFF700010830A8
BCP4: D84000007F728866
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\032013-22822-01.dmp
C:\Users\zass\AppData\Local\Temp\WER-75426-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Attached are the dumps

Thanks in advance for the help

A:BSOD BCCode: 1a

Please begin by removing Daemon tools, then once it is uninstalled please download and run this tool:

DuplexSecure - Downloads

When you run the tool if the Uninstall button is grayed out then you are done and can close the window. If it is not then click uninstall and allow the tool to run. DO NOT click the install button it will install a harmful driver onto your system.

http://www.sevenforums.com/bsod-help-support/283077-bsod-bccode-1a.html
Relevancy 47.73%

vista
64bit
vista is oem
rig 12/08
OS reinstalled two weeks ago

woke up today and had a bsod?

thanks in advance.

A:bsod bccode A

Hi welcome to the forum.
I would ask you to be patient I have requested one of our BSOD experts to look at your problem

http://www.vistax64.com/crashes-debugging/288684-bsod-bccode.html
Relevancy 47.73%

Am having similar problems with wife's new system running Win 7. Could it be the ATI Radeon video card drivers?

Thanks for your help


Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 116
BCP1: FFFFFA8003A55010
BCP2: FFFFF88003AE769C
BCP3: 0000000000000000
BCP4: 0000000000000002
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1

A:BSOD BCCode 116

[2-Int] STOP 0x116: VIDEO_TDR_ERROR troubleshooting

http://www.sevenforums.com/bsod-help-support/92807-bsod-bccode-116-a.html
Relevancy 47.73%

Im getting BSOD at random time e g at desktop and im away from BCCode: 24 BSOD, the keyboard and downloading in the background i have never had this issue before since i bought this computer months ago it all started weeks ago when i went away for days i had the computer turn off and the power switch off i have also did a memtest and windows memery test the windows one shows no problem but memtest shows problems not even single pass and after i done memtest i couldn't log into windows so i reinstall BSOD, BCCode: 24 windows PS im getting BSOD BSOD, BCCode: 24 under fresh installed Windows Pro with only few apps installed and video card driver Also when the Windows startup i don't hear the startup sound right away i hear it like mins later randomly I have also moved my RAM gb x both of them from white slot to blue slots didn't stop BSOD Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode BCP C A BCP BCP BCP OS Version Service Pack Product Files that help describe the problem C Windows Minidump - - dmp C Users chang AppData Local Temp WER- - sysdata xml

A:BSOD, BCCode: 24

Have you removed / replaced the bad ram stick?

http://www.sevenforums.com/bsod-help-support/256877-bsod-bccode-24-a.html
Relevancy 47.73%

Hello friends I recently have problems a my windows 7 home premium.
It gives me a screen blue with the following problems I hope and help.

BCCode 1e
BCP1: FFFFFFFFC0000005
BCP2: FFFFF80003A65797
BCP3: 000000000000000
BCP4: 00000000FFFA0000
OS Version: 6_1_7600
Service Pack 0_0
Product 768_1

A:BSOD BCCode 1e

Hello Hernan, and welcome to Seven Forums.

Please read the instructions here: Blue Screen of Death (BSOD) Posting Instructions, and post back with the needed information. One of our BSOD experts should be by later when able to further help.

http://www.sevenforums.com/bsod-help-support/347769-bsod-bccode-1e.html
Relevancy 47.73%

Hi, I'm new here, I've problems with Win7, well this just happen when I turn on the system the first time then when I turn on again the system it's ok

Is Windows 7 . . .
- x64
- the original installed OS on the system? - No
- an OEM or full retail version?
- OEM = came pre-installed on system
- Full Retail = you purchased it from retailer

- What is the age of system (hardware)? - 1 year
- What is the age of OS installation (have you re-installed the OS?) - 1 year
Thanks

A:BSOD BCCode 1a

  
Quote: Originally Posted by tttony


Hi, I'm new here, I've problems with Win7, well this just happen when I turn on the system the first time then when I turn on again the system it's ok

Is Windows 7 . . .
- x64
- the original installed OS on the system? - No
- an OEM or full retail version?
- OEM = came pre-installed on system
- Full Retail = you purchased it from retailer

- What is the age of system (hardware)? - 1 year
- What is the age of OS installation (have you re-installed the OS?) - 1 year
Thanks



One thing I noticed

Please remove any CD virtualization programs such as Daemon Tools and Alcohol 120%. They use a driver, found in your dmp, sptd.sys, that is notorious for causing BSODs. Use this SPTD uninstaller when you're done: DuplexSecure - Downloads
[/quote]
You can use MagicDisc as an alternative.

Freeware MagicISO Virtual CD/DVD-ROM(MagicDisc) Overview
Ken J

http://www.sevenforums.com/bsod-help-support/127217-bsod-bccode-1a.html
Relevancy 47.73%

Please help, i'm on the verge of reformatting my computer and do not know the reason for blue screen errors. I've attached the dmp file to the post here. Not sure what is causing the issue.

Source
Windows

Summary
Shut down unexpectedly

Date
‎06/‎02/‎2015 10:05 PM

Status
Report sent

Problem signature
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 4105

Extra information about the problem
BCCode: 1000007e
BCP1: FFFFFFFFC0000005
BCP2: FFFFF8000323709C
BCP3: FFFFF880031E84D8
BCP4: FFFFF880031E7D30
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1
Bucket ID: X64_0x7E_nt!MiPageMightBeZero+8
Server information: 46a51231-bd74-4df0-8222-8af2516bb4a8

Thanks for your help

Best Regards,

A:BSOD BCCode 1e

Why ignore the information at the top of the thread telling you exactly how to get help with a BSOD?

http://www.sevenforums.com/bsod-help-support/360541-bsod-bccode-1e.html
Relevancy 47.73%

Hello I had major problems with my pc for a while When I was doing simple things browsing websites my screen went black and the rig rebooted Later I first got a bsod and than it rebooted What I have done re-installed Win Pro on my SSD re-installed Win Pro on my on a hdd run mem test browsed through millions of forums and pulled my hair out I also tried to unplug as most of the hardware as possible and put them back in without any result Then I borrowed GB of DDR from my work the mobo can handle both DDR and and plugged that in that was it It never crashed again with this mem So I've ordered GB of DDR x Corsair Vengeance - GB but the pc wouldn't boot at all with that it didnt even showed the bios screen Brought the mem back to the shop and got x Icidu DDR - GB kit but withn that the pc didnt boot either When I put the borrowed mem from my wok back in BSOD BCCode: - 1e it was all ok again Now I have bought x GB Kingston ValueRam x GB DDR MHz CL and the pc is working Though it is not very stable it crashes again with a bsod when I do heavy things BSOD - BCCode: 1e unpack large rarfiles or playing games I've read somewhere that somebody with the same ram raised the voltage on the mem so i tried that too and it seems to be slightly better from v to i think Plz can somebody try to help me out finding a solution for this All info is in the attachment tell me plz if it is not enough btw forgive me for my english its not my native language Grtz Ronald

A:BSOD - BCCode: 1e

Easy Your AVG

I notice your AVG which is often at least a contributing cause of BSOD'S . Please remove and replace your AVG with Microsoft Security Essentials AT LEAST TO TEST

Download tools and utilities | AVG Worldwide

Microsoft Security Essentials - Free Antivirus for Windows

http://www.sevenforums.com/bsod-help-support/203059-bsod-bccode-1e.html
Relevancy 47.73%

My Notebook is Asus K46cb with optimus GPU Nvidia 740m Geforce, sometimes when I am browsing and open another application is getting BSOD frequently . at least twice a day

Operating System: Windows 7 Ultimate 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.130828-1532)
Language: English (Regional Setting: English)
System Manufacturer: ASUSTeK COMPUTER INC.
System Model: K46CB
BIOS: BIOS Date: 05/17/13 10:47:14 Ver: 04.06.05
Processor: Intel(R) Core(TM) i3-3217U CPU @ 1.80GHz (4 CPUs), ~1.8GHz
Memory: 4096MB RAM
Available OS Memory: 3982MB RAM
Page File: 3254MB used, 4706MB available
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 2057

Additional information about the problem:
BCCode: 109
BCP1: A3A039D896277637
BCP2: B3B7465EE8A5B141
BCP3: FFFFF880009FE540
BCP4: 0000000000000003
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\022414-21590-01.dmp
C:\Users\Muhariefin\AppData\Local\Temp\WER-42572-0.sysdata.xml

dmp file https://www.dropbox.com/s/qr1at273sx...4-25240-01.dmp

Relevancy 47.73%

It happens randomly, not sure what causes it.






Quote:
Problemos para?as:
Problemos įvykio pavadinimas: BlueScreen
OS versija: 6.1.7601.2.1.0.256.1
Vietos lokalė: 1063

Papildoma informacija apie problemą:
BCCode: d1
BCP1: D01FFFFF
BCP2: 00000002
BCP3: 00000001
BCP4: 93DCACC7
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Failai, kurie padeda apibūdinti problemą:
C:\Windows\Minidump\070713-81338-01.dmp
C:\Users\Namai\AppData\Local\Temp\WER-132226-0.sysdata.xml

Skaitykite mūsų privatumo patvirtinimą internete:
http://go.microsoft.com/fwlink/?link...8&clcid=0x0427

Jei privatumo patvirtinimas tinkle neprieinamas, skaitykite mūsų privatumo patvirtinimą neprisijungę:
C:\Windows\system32\lt-LT\erofflps.txt

A:BSOD. BCCode: d1

Seems like Blue Blue Coat K9 Web Protection was the cause of the BSoD, update or uninstall it:

9bdda000 9bdf6000 bckd Fri Mar 01 12:12:24 2013 (51308D18)

Also update these drivers:

Realtek PCIe GBE Family Controller
a56eb000 a5730000 Rt86win7 Wed Jun 23 11:10:23 2010 (4C21CF7F)

nVidia nForce chipset driver
93489000 93492000 nvsmu Mon Jun 29 09:36:34 2009 (4A486F02)

CD-ROM Class Filter Driver by Gear Software (iTunes)
93515000 9351a280 GEARAspiWDM Mon May 18 14:16:53 2009 (4A1151B5)

Realtek PCIe GBE Family Controller
93c37000 93c7c000 Rt86win7 Wed Jun 23 11:10:23 2010 (4C21CF7F)

NVIDIA High Definition Audio
93d20000 93d33000 nvhda32v Fri Aug 21 22:23:35 2009 (4A8F0247)

New DeathAdder Mouse driver
93d5c000 93d5e680 danew Mon Feb 08 04:54:37 2010 (4B6F8AFD)
9412f000 94137000 VKbms Thu Sep 30 18:16:39 2010(4CA4B7E7)

Atheros AR9285 Wireless Network Adapter
93e0a000 9402d000 athr Wed Nov 23 07:33:34 2011 (4ECC93BE)

ATK0101 ACPI Utility Driver
9407d000 94085000 ATKACPI Wed May 13 03:00:08 2009 (4A0A1B98)

NVIDIA GeForce GT 320M
9460a000 94f80820 nvlddmkm Fri Dec 11 17:16:08 2009 (4B227048)

Also Uninstall Daemon tools and the sptd-driver (download the installation program and use it to uninstall the driver).

http://www.sevenforums.com/bsod-help-support/296511-bsod-bccode-d1.html
Relevancy 47.73%

I usually use Windows but I've been getting Bccode A BSODs here recently So I thought I A BSOD Bccode would switch over to a Vista partition with only basic drivers and stability tests to see if I still get it to eliminate a corrupted driver I can't identify It happened again so I'm leaning towards a hardware problem But perhaps you guys could take a look at the ZIP and give me more info The dump is from Vista but it happens in both Vista and Now this primarily happens when folding The CPU has had the same OC for a long time and has recently passed passes of LinX and hours of Prime so I'm Bccode A BSOD pretty sure it's fine My memory also recently passed passes of memtest OS - Vista both x and OEM CPU - i Memory - Corsair Dominator GT cas Video Card - EVGA GTX SLI Motherboard - Asus P T WS Revolution BIOS PSU - Enermax Galaxy Evo W I deleted all of my previous minidumps in Vista because those were from stability testing If you need more info from the Win minidumps let me know Thanks

A:Bccode A BSOD

If the problem is hardware a minidump won't be very useful.
However long it may have worked that way and whatever the tests might say, I would start by removing all overclocking.

http://www.techsupportforum.com/forums/f299/bccode-a-bsod-492071.html
Relevancy 47.73%

Hey guys!
Since I built this computer I've been having a constant stream of BSODs
Up until now, I've tolerated them, thinking they will be patched by themselves or I would fix them later

This is later.
I apologise that the crash data is in norwegian, but it's the same as in english.

Today ALONE I've had at least three BSODs. All at different times of use with different apps.


Problemsignatur:
Navn p? problemhendelse: BlueScreen
OS-versjon: 6.0.6001.2.1.0.256.1
ID for nasjonal innstilling: 1044

Tilleggsinformasjon om problemet:
BCCode: 24
BCP1: 00000000001904AA
BCP2: FFFFFA6001D8C778
BCP3: FFFFFA6001D8C150
BCP4: FFFFF8000208813A
OS Version: 6_0_6001
Service Pack: 1_0
Product: 256_1

Thanks in advance!

A:BCCode 24 BSOD,

BCCode: 24=ntfs error
run
chkdsk /f

http://www.vistax64.com/crashes-debugging/207091-bccode-24-bsod.html
Relevancy 47.73%

Hi there,

My system is Windows 7 Professional
- x86 (32-bit)
- the original installed OS on the system.
- a Dell OEM pre-installed on system

- Only 1.5 years of system (hardware)?
- 1.5 years of OS installation (The original installation)

This is the first time it suddenly crashes. Please check the dumped info.

Thanks a lot!

Relevancy 47.73%

Hi -

I am getting repeated BSOD events (laptop just restarts itself up to 5-6 times a day either on battery or mains or mains with battery removed).

I attach the logs from the SF diagnostic tool. Any help greatly appreciated

Here is some basic output following a BSOD

Blue Screen:

C:\Windows\Minidump\012114-22713-01.dmp
C:\Users\Chris\AppData\Local\Temp\WER-36566-0.sysdata.xml


Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 2057

Additional information about the problem:
BCCode: 7a
BCP1: C05ADBF8
BCP2: C000000E
BCP3: 2FBEABE0
BCP4: B5B7F000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\012114-22713-01.dmp
C:\Users\Chris\AppData\Local\Temp\WER-36566-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

A:BSOD - BCCode: 7a

Hi bluedoorsoftwar.

The crash dumps are not opening for me ... but still I want to say you something as you said that it is stop 0x7A.
Make it sure that the Crucial M500 240GB SATA 2.5" SSD Is running with the latest firmware,
Firmware Update MU03 dated 09/24/2013.
Crucial.com Product Downloads - Firmware Updates
Post a screenshot of the SSD using CrystalDiskInfo - Software - Crystal Dew World
Let us know the results.

http://www.sevenforums.com/bsod-help-support/319327-bsod-bccode-7a.html
Relevancy 47.73%

Hi Guys I recently installed windows on a new computer build but have found it crashes a couple of times a day with the Bluescreen error Any help would be greatly appreciated BSOD BCCode 1a The OS is Windows Professional and the hardware bar the hardrive and case is new The hardware spec is as BSOD BCCode 1a follows Radeon HD GB DDR Graphics card BSOD BCCode 1a Intel i - k processor Patriot x gb DDRIII BSOD BCCode 1a MHZ XFX W PSU ASUS P Z -V Motherboard Attached is the system health report and BSOD Dump amp System File Collection report I noticed it says 'unknown' device drivers are missing in the system health report The initial problem contained the following information Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode a BCP BCP FEFA E BCP BCP FFFFF OS Version Service Pack Product Files that help describe the problem C Windows Minidump - - dmp C Users user AppData Local Temp WER- - sysdata xml However the last problem involved Appcrash explorer exe d ee SHLWAPI dll ce c ab c Thanks in advance for any help

A:BSOD BCCode 1a

App crashes are different from BSOD's. I'd suggest using the free Shell Extension Viewer ( ShellExView - Shell Extension Manager For Windows ) to selective disable 3rd party extensions to see if there's an issue with any of them.

As for the BSOD's, here's what I found:

perfmon reports an unknown device does not have it's drivers installed
MSINFO32 shows this device as this:





Quote:
Not Available USB\VID_0CF3&PID_3000\6&DF2EE03&0&7 The drivers for this device are not installed.


My research indicates that this is an Atheros AR3011 Bluetooth device. Please visit the Manufacturer's website and download/install drivers for it.

Only 55 updates installed since SP1. Most systems have 60-70 or more. Please visit Windows Update to ensure that you have all available updates

The WER section of MSINFO32 reports 2 BSOD's
- a STOP 0x1A blaming the kernel (core file of the OS)
- a STOP 0x3B blaming your ATI video driver

Without any other info, I'd suggest:
- updating your video drivers from the ATI website
- updating your chipset drivers from the PC/mobo Manufacturer's website

If that doesn't fix things, then I'd suggest running the free diagnostics/stress tests on this page: Hardware Diags
Please post back with the results of the tests.
Good luck!
BSOD BUGCHECK SUMMARY

Code:

Loading Dump File [C:\Users\FUBAR\_jcgriff2_\dbug\__Kernel__\010412-22542-01.dmp]
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Tue Jan 3 22:03:46.650 2012 (UTC - 5:00)
System Uptime: 0 days 10:16:31.665
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+4ac3 )
BUGCHECK_STR: 0x1a_41284
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: taskhost.exe
FAILURE_BUCKET_ID: X64_0x1a_41284_nt!_??_::FNODOBFM::_string_+4ac3
Bugcheck code 0000001A
Arguments 00000000`00041284 000007fe`fa0e5001 00000000`00000000 fffff700`01080000
BiosVersion = 0501
BiosReleaseDate = 05/09/2011
CPUID: "Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz"
MaxSpeed: 3400
CurrentSpeed: 3411
??????????????????????????????????????????????????????????????????????????????????????``
Loading Dump File [C:\Users\FUBAR\_jcgriff2_\dbug\__Kernel__\010312-17862-01.dmp]
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Tue Jan 3 11:46:04.477 2012 (UTC - 5:00)
System Uptime: 0 days 2:22:30.492
Probably caused by : atikmdag.sys ( atikmdag+90817 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x3B
PROCESS_NAME: dwm.exe
FAILURE_BUCKET_ID: X64_0x3B_atikmdag+90817
Bugcheck code 0000003B
Arguments 00000000`c0000005 fffff880`056b4817 fffff880`07ada7b0 00000000`00000000
BiosVersion = 0501
BiosReleaseDate = 05/09/2011
CPUID: "Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz"
MaxSpeed: 3400
CurrentSpeed: 3411
??????????????????????????????????????????????????????????????????????????????????????``

http://www.sevenforums.com/bsod-help-support/206452-bsod-bccode-1a.html
Relevancy 47.73%

Hello I have been having lots of BSOD crashes and I need some help figuring out if it is a piece of hardware on my machine or what is up. I have reformated my machine yesterday but I am still having all sorts of BSODs. This is the latest one

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 4105

Additional information about the problem:
BCCode: 1e
BCP1: FFFFFFFFC0000094
BCP2: FFFFF880010B3176
BCP3: 0000000000000000
BCP4: 0000000000000006
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\041312-16676-01.dmp
C:\Users\Paul\AppData\Local\Temp\WER-40887-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Attachment 207117

Attachment 207118

A:BSOD BcCode 1e

Just had another one


Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 4105

Additional information about the problem:
BCCode: 1000007e
BCP1: FFFFFFFFC0000005
BCP2: FFFFF88004D980C0
BCP3: FFFFF880021069E8
BCP4: FFFFF88002106240
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\041312-21216-01.dmp
C:\Users\Paul\AppData\Local\Temp\WER-114177-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

http://www.sevenforums.com/bsod-help-support/224302-bsod-bccode-1e.html
Relevancy 47.73%

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
Additional information about the problem:
BCCode: 3b
BCP1: 00000000C0000005
BCP2: FFFFF8800897032D
BCP3: FFFFF880092E8F80
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1
Files that help describe the problem:
C:\Windows\Minidump\121312-71386-01.dmp
C:\Users\Darion Mograine\AppData\Local\Temp\WER-158793-0.sysdata.xml
--------------------------------------------------------------------------------
hidne files are shown, but files not there, did the grab and uploading, help me find out whats making then and now to stop/fix them.

A:BSOD BCCode: 3b (and more)

uninstall/update GIGABYTE Tools


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 3B, {c0000005, fffff8800a30032d, fffff8800bc8cf80, 0}

Probably caused by : gdrv.sys ( gdrv+332d )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff8800a30032d, Address of the instruction which caused the bugcheck
Arg3: fffff8800bc8cf80, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.

Debugging Details:
------------------


EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

FAULTING_IP:
gdrv+332d
fffff880`0a30032d 488941e0 mov qword ptr [rcx-20h],rax

CONTEXT: fffff8800bc8cf80 -- (.cxr 0xfffff8800bc8cf80)
rax=00100000246c6d24 rbx=fffff8800d413000 rcx=0000000000000020
rdx=fffff8800d413000 rsi=0000000000000020 rdi=fffffa8008f22200
rip=fffff8800a30032d rsp=fffff8800bc8d968 rbp=fffffa800ac1f600
r8=000000000000f000 r9=0000000000000780 r10=00640029005a0010
r11=0000000000000000 r12=fffffa800a35b470 r13=0000000000000020
r14=fffffa8008f22200 r15=0000000000000000
iopl=0 nv up ei pl nz na pe nc
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010202
gdrv+0x332d:
fffff880`0a30032d 488941e0 mov qword ptr [rcx-20h],rax ds:002b:00000000`00000000=????????????????
Resetting default scope

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

BUGCHECK_STR: 0x3B

PROCESS_NAME: snmp.exe

CURRENT_IRQL: 0

LAST_CONTROL_TRANSFER: from 0000000000000000 to fffff8800a30032d

STACK_TEXT:
fffff880`0bc8d968 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : gdrv+0x332d


FOLLOWUP_IP:
gdrv+332d
fffff880`0a30032d 488941e0 mov qword ptr [rcx-20h],rax

SYMBOL_STACK_INDEX: 0

SYMBOL_NAME: gdrv+332d

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: gdrv

IMAGE_NAME: gdrv.sys

DEBUG_FLR_IMAGE_TIMESTAMP: 49b9d175

STACK_COMMAND: .cxr 0xfffff8800bc8cf80 ; kb

FAILURE_BUCKET_ID: X64_0x3B_gdrv+332d

BUCKET_ID: X64_0x3B_gdrv+332d

Followup: MachineOwner
---------

http://www.sevenforums.com/bsod-help-support/269044-bsod-bccode-3b-more.html
Relevancy 47.73%

Hello,

I would like some help fixing a blue screen problem I have been having recently. I have been having seemingly random blue screens while my computer has been idling, playing music, etc. My specifics are as follows:

-Windows 7 x64 (Retail upgrade disc bought and installed by me) - originally
installed XP, but decided to upgrade to 7
-New self-built PC (couple of months old)
-AMD Phenom II x4 965 BE, MSI 870A-G54 mobo, Crucial Ballistix 4gb DDR3
1600 memory, MSI R5770 gpu, OCZ 700w power supply, AC CPU fan

Thank you for your help in advance.

A:BSOD Help BCCode B3

  
Quote: Originally Posted by VitriolicSword


Hello,

I would like some help fixing a blue screen problem I have been having recently. I have been having seemingly random blue screens while my computer has been idling, playing music, etc. My specifics are as follows:

-Windows 7 x64 (Retail upgrade disc bought and installed by me) - originally
installed XP, but decided to upgrade to 7
-New self-built PC (couple of months old)
-AMD Phenom II x4 965 BE, MSI 870A-G54 mobo, Crucial Ballistix 4gb DDR3
1600 memory, MSI R5770 gpu, OCZ 700w power supply, AC CPU fan

Thank you for your help in advance.


These were all caused by your video driver. Please use the below instructions to remove and re-install the newest version.

When upgrading your graphic driver you MUST remove all traces of the current driver. In order to do that we recommend using Guru3D - Driver Sweeper

When it is removed then download and install the fresh copy.


Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\K\Desktop\Windows_NT6_BSOD_jcgriff2\123110-14601-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols;srv*e:\symbols
*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Machine Name:
Kernel base = 0xfffff800`02e4b000 PsLoadedModuleList = 0xfffff800`03088e50
Debug session time: Fri Dec 31 16:45:53.433 2010 (GMT-5)
System Uptime: 0 days 3:20:11.776
Loading Kernel Symbols
.

Press ctrl-c (cdb, kd, ntsd) or ctrl-break (windbg) to abort symbol loads that take too long.
Run !sym noisy before .reload to track down problems loading symbols.

..............................................................
................................................................
...................................
Loading User Symbols
Loading unloaded module list
......
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 3B, {c0000005, fffff8800495d817, fffff88007a10900, 0}

Probably caused by : atikmdag.sys ( atikmdag+90817 )

Followup: MachineOwner
---------

3: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff8800495d817, Address of the exception record for the exception that caused the bugcheck
Arg3: fffff88007a10900, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.

Debugging Details:
------------------
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

FAULTING_IP:
atikmdag+90817
fffff880`0495d817 8b4820 mov ecx,dword ptr [rax+20h]

CONTEXT: fffff88007a10900 -- (.cxr 0xfffff88007... Read more

http://www.sevenforums.com/bsod-help-support/135390-bsod-help-bccode-b3.html
Relevancy 47.73%

When I leave desktop computer on for an extended period of time (say overnight), I find that when I come back to it, it has turned off or rebooted. Sometimes I get a BSOD and other times I get a message saying that Windows did not shut down properly.

There shouldn't be anything going on with the system during these times other than a scheduled nightly backup to an external hard drive. I am using SyncToy for this.

I have done memory and hard disk checks and there were no problems or errors reported.

Attached is the requested files as per the BSOD posting instructions. If anyone can look at these and help me figure out what is going on, it would be greatly appreciated!

If any other info is needed, just let me know.

Thanks!

A:BSOD and BCCode 124

So sorry! I left out some info:

-Windows 7 Professional 64-bit
-Original OS installed on system was Windows 7 Home Premium 64-bit. Upgraded through "Anytime Upgrade" option to Professional
-Retail version of Windows
-System is just under two months old
-Original OS installed just under two months ago. Upgrade to Pro done approximately one month ago.

http://www.sevenforums.com/bsod-help-support/98013-bsod-bccode-124-a.html
Relevancy 47.73%

This error occurs on an Acer laptop running a Win 7 Professional version 64bit, which leads to a BSOD.


Code:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.48
Locale ID: 1049

Additional information about the problem:
BCCode: f4
BCP1: 0000000000000003
BCP2: FFFFFA80064A3B30
BCP3: FFFFFA80064A3E10
BCP4: FFFFF80003383D50
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\121512-16941-01.dmp
C:\Users\ACER-HP\AppData\Local\Temp\WER-98506113-0.sysdata.xml

Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Here the .dmp file:
https://dl.dropbox.com/u/1659209/121512-16941-01.dmp

edit: i found http://www.sevenforums.com/crashes-d...bccode-f4.html

so maybe i first try this and then ask again

A:BSOD - BCCode f4

Please post the following report before we proceed:Windows Genuine and Activation Issue Posting Instructions

http://www.sevenforums.com/bsod-help-support/269435-bsod-bccode-f4.html
Relevancy 47.73%

Howdy--just got my new PC and it is BSOD every - minutes sometimes BSOD--sometimes just freezes the screen and need to reboot I can gaurentee it to happen if I go to facebook and play zynga poker--but it will happen 101 BSOD BCCode randomly otherwise The problem signature follows Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode BCP BCP BCP FFFFF E BCP OS Version Service Pack BCCode 101 BSOD Product Files that help describe the problem C Windows Minidump - - dmp C Users Thomas AppData Local Temp WER- - sysdata xml Read our privacy statement online Windows Privacy Statement - Microsoft Windows If the online privacy statement is not available please read our privacy statement offline C Windows system en-US erofflps txt Took cyberpowerpc BCCode 101 BSOD over weeks to get it to me and now they want me to send it back for a month round trip If Anyone can help me fix it you would save me in return postage restocking fees and keep me from buying a wimpy HP replacement albeit it a likely working replacement I've just scanned and updated any out of date drivers on a brand new pc--is that normal I've read a bunch about this error and possibly needing to flash the bios--never done that before--would it help Thanks for any help Tom

A:BCCode 101 BSOD

Hi Tom and welcome,
The dump is STOP 0x101 error - which relates to CPU fault. Read... STOP 0x101: CLOCK_WATCHDOG_TIMEOUT troubleshtg

Do the followings...
- Boot into Safe Mode with Networking
- Uninstall the Display Drivers including Catalyst Control Center
- Use Driver Sweeper to sweep the traces of the driver http://www.guru3d.com/category/driversweeper/
- Install the latest version http://sites.amd.com/us/game/downloa...n_win7-64.aspx
- Reboot into normal mode

Please remove ALL Gigabyte Software - known cause of BSOD with Windows 7.

Code:
gdrv.sys Fri Mar 13 16:22:29 2009
If you are overclocking anything (CPU, RAM, GPU) - stop and return to default values.

Let us know how it goes after doing the things above.

`

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 101, {21, 0, fffff880009e7180, 1}

Unable to load image \SystemRoot\system32\DRIVERS\atikmdag.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

CLOCK_WATCHDOG_TIMEOUT (101)
An expected clock interrupt was not received on a secondary processor in an
MP system within the allocated interval. This indicates that the specified
processor is hung and not processing interrupts.
Arguments:
Arg1: 0000000000000021, Clock interrupt time out interval in nominal clock ticks.
Arg2: 0000000000000000, 0.
Arg3: fffff880009e7180, The PRCB address of the hung processor.
Arg4: 0000000000000001, 0.

Debugging Details:
------------------
OVERLAPPED_MODULE: Address regions for 'tcpipreg' and 'Sftfslh.sys' overlap

BUGCHECK_STR: CLOCK_WATCHDOG_TIMEOUT_6_PROC

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

PROCESS_NAME: CCC.exe

CURRENT_IRQL: d

STACK_TEXT:
fffff880`0a6117e8 fffff800`03123a89 : 00000000`00000101 00000000`00000021 00000000`00000000 fffff880`009e7180 : nt!KeBugCheckEx
fffff880`0a6117f0 fffff800`030d6eb7 : 00000000`00000000 fffff800`00000001 00000000`00026160 00000000`00000001 : nt! ?? ::FNODOBFM::`string'+0x4e2e
fffff880`0a611880 fffff800`0300d895 : fffff800`03033460 fffff880`0a611a30 fffff800`03033460 00000000`00000000 : nt!KeUpdateSystemTime+0x377
fffff880`0a611980 fffff800`030c8b73 : 00000000`83342ae8 fffff800`0323ee80 fffff800`0323ee80 00000000`00000000 : hal!HalpHpetClockInterrupt+0x8d
fffff880`0a6119b0 fffff800`030d21f2 : fffff800`0323ee80 fffff8a0`00000001 00000000`00000000 fffff880`0a611c48 : nt!KiInterruptDispatchNoLock+0x163
fffff880`0a611b40 fffff800`030eca71 : 00000000`00000000 00000000`00000002 00000000`00000001 0000000d`0000003c : nt!KeFlushMultipleRangeTb+0x252
fffff880`0a611c10 fffff800`030ef4bc : 00000000`00000002 fffff880`0a611d80 fffff8a0`07e68000 00000000`00000001 : nt!MiFlushTbAsNeeded+0x1d1
fffff880`0a611d20 fffff800`031f4f86 : 00000000`000018d0 fffffa80`0517d000 00000000`00000005 fffff800`030ea1ce : nt!MiAllocatePagedPoolPages+0x4cc
fffff880`0a611e40 fffff800`030ed1d0 : 00000000`000018d0 fffffa80`0517d000 00000000`00000005 fffff880`057f3568 : nt!MiAllocatePoolPages+0x906
fffff880`0... Read more

http://www.sevenforums.com/bsod-help-support/153362-bccode-101-bsod.html
Relevancy 47.73%

BCCode: d1
BCP1: 000000000000002C
BCP2: 0000000000000002
BCP3: 0000000000000001
BCP4: FFFFF88005A2095E
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1

minidump files:

112512-19812-01.dmp
112512-18782-01.dmp

Please help, I'm not quite sure what to do and how to make this stop.

A:BSOD bccode: d1

Does anyone know what those .dmp files are?

http://www.sevenforums.com/bsod-help-support/266357-bsod-bccode-d1.html
Relevancy 47.73%

My system is a little less than a year old the OS is fairly new OS Windows x CPU AMD Phenom Quad-Core Processor RAM GB Video Card NVIDIA GeForce GTX c2 BCCode BSOD MB Gigabyte S-Series GA-MA X-DS Power Antec Earthwatts W Max Sometimes I go days between BSOD BCCode c2 crashes other BSOD BCCode c2 times only hours and some are at night while the system is idle I get this message upon startup Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode c BCP BCP BCP D BCP FFFFF A C OS Version Service Pack Product Files that help describe the problem C Windows Minidump - - dmp C Users Sven AppData Local BSOD BCCode c2 Temp WER- - sysdata xml Read our privacy statement online http go microsoft com fwlink link amp clcid x If the online privacy statement is not available please read our privacy statement offline C Windows system en-US erofflps txt I attached the autoruns and the TSF vista support but when I tried to do a perfmon report it says quot An error occured while attempting to generate the report quot I can open perfmon but not perfmon report Ironically my system crashed when I was writing this and I had to start over Thanks for any help

A:BSOD BCCode c2

Hello and welcome to TSF.

All are identical; bugcheck 0xC2 pointing to Ntfs.sys:
Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\Devin\AppData\Local\Temp\Rar$DI00.924\021710-20654-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\websymbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0xfffff800`02a0c000 PsLoadedModuleList = 0xfffff800`02c49e50
Debug session time: Wed Feb 17 05:05:10.694 2010 (GMT-5)
System Uptime: 0 days 3:39:55.301
Loading Kernel Symbols
...............................................................
................................................................
...................
Loading User Symbols
Loading unloaded module list
......
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck C2, {7, 1097, 5110203, fffff8a01af41a60}

GetPointerFromAddress: unable to read from fffff80002cb40e0
Probably caused by : Ntfs.sys ( Ntfs!NtfsCommonCreate+253e )

Followup: MachineOwner
---------

3: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

BAD_POOL_CALLER (c2)
The current thread is making a bad pool request. Typically this is at a bad IRQL level or double freeing the same allocation, etc.
Arguments:
Arg1: 0000000000000007, Attempt to free pool which was already freed
Arg2: 0000000000001097, (reserved)
Arg3: 0000000005110203, Memory contents of the pool block
Arg4: fffff8a01af41a60, Address of the block of pool being deallocated

Debugging Details:
------------------


POOL_ADDRESS: fffff8a01af41a60

FREED_POOL_TAG: NtFC

BUGCHECK_STR: 0xc2_7_NtFC

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

PROCESS_NAME: System

CURRENT_IRQL: 0

LAST_CONTROL_TRANSFER: from fffff80002baf60e to fffff80002a7df00

STACK_TEXT:
fffff880`0319a938 fffff800`02baf60e : 00000000`000000c2 00000000`00000007 00000000`00001097 00000000`05110203 : nt!KeBugCheckEx
fffff880`0319a940 fffff880`012d53f5 : fffff8a0`03a5b3a8 00000000`00000023 fffff800`02c215a0 fffffa80`06d44400 : nt!ExFreePool+0xccb
fffff880`0319a9f0 fffff880`0122e4dd : fffffa80`06d44400 fffffa80`0409ebd0 fffff880`07b9f400 00000000`00000000 : Ntfs!NtfsCommonCreate+0x253e
fffff880`0319abd0 fffff800`02a8b161 : fffffa80`03d0a800 fffff800`02a71b00 fffff800`02c83100 fffff800`00000000 : Ntfs!NtfsFspDispatch+0x26d
fffff880`0319acb0 fffff800`02d21166 : 0000051c`00000000 fffffa80`03d05040 00000000`00000080 fffffa80`03cf1040 : nt!ExpWorkerThread+0x111
fffff880`0319ad40 fffff800`02a5c486 : fffff880`02f63180 fffffa80`03d05040 fffff880`02f6dfc0 0000051c`00000000 : nt!PspSystemThreadStartup+0x5a
fffff880`0319ad80 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KxStartSystemThread+0x16


STACK_COMMAND: kb

FOLLOWUP_IP:
Ntfs!NtfsCommonCreate+253e
fffff880`012d53f5 e9a1fbffff jmp Ntfs!... Read more

http://www.techsupportforum.com/forums/f299/bsod-bccode-c2-462505.html
Relevancy 47.73%

I've spent a couple days trying to figure out how to fix it but no go. Currently running with video driver diabled. I've tried updating bios, drivers, uninstalling drivers and reinstalling, but still recieve the blue screen. Any help would be greatly appreciated.
Asus G50vt x1 laptop, Vista home premium 64 oem.

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
Additional information about the problem:
BCCode: 116
BCP1: FFFFFA800B6D1010
BCP2: FFFFFA60024142B0
BCP3: 0000000000000000
BCP4: 0000000000000002
OS Version: 6_0_6002
Service Pack: 2_0
Product: 768_1
Files that help describe the problem:
C:\Windows\Minidump\Mini110310-01.dmp
C:\Users\Chris\AppData\Local\Temp\WER-159121-0.sysdata.xml
C:\Users\Chris\AppData\Local\Temp\WER7020.tmp.version.txt
Read our privacy statement:
Microsoft Online Crash Analysis

A:BCCode 116 (BSOD)

I've had this for almost a couple years and it just now started doing thi. By any chance would upgrading to windows7 and doing a complete install fix this?

http://www.vistax64.com/crashes-debugging/284754-bccode-116-bsod.html
Relevancy 47.73%

My laptop has had this issue since I re-imaged it to win 7. I think it has something to do with the drivers but I don't know what ones. Minidump files below. Its a Toshiba satellite A215-S5808. Thanks for any feedback and help.
 

https://forums.techguy.org/threads/bsod-bccode-124.1068597/
Relevancy 47.73%

I know there are hundreds of different forums on this page about this error I've tried checking my RAM no errors my CPU no errors updating my drivers reseating and connecting all BCCode BSOD 124 wires to my mobo and now I'm losing my mind It started about days ago when I started playing Civilization Beyond Earth I know you're thinking overheat I thought the same thing but my temperatures on my CPU and GPU maintain BSOD BCCode 124 - C ish The first couple times I actually got a Blue Screen now it just goes black restarts and when I log on I have a message saying I got one BSOD BCCode 124 The only recent changes hardware wise I've made recently is I installed new LED fans and cleaned up my wiring a bit I've kept on virus protection and currently my computer is BSOD BCCode 124 clean This is what I'm getting BCCode BCP BCP FFFFFA D BCP BF BCP OS Version Service Pack Product I'm having issues accessing my dump file so help would need to start there Any help is greatly appreciated

A:BSOD BCCode 124

May I ask your model #, RAM, GPU, HDD, Monitor, antivirus program, anything that can help me find solutions.

http://www.techsupportforum.com/forums/f299/bsod-bccode-124-a-911898.html
Relevancy 47.73%

had a bluescreen while playing some games the other day. computer froze and went into bsod. rebooted and froze on bios screen. had to hit power button and restart manually. has been fine since then. would just like to know what the problem actually is.

Have attached the SF diagnostic tool files to the post.

Thank your for any feedback.

A:BSOD Bccode f4

Update the firmware of your SSD.

http://www.sevenforums.com/bsod-help-support/281606-bsod-bccode-f4.html
Relevancy 47.73%

Hi I am having a BSOD on my newly assembled pc that I built I have not been able to run the computer for more than half a day since I have built it The crash is BSOD bccode 116 wierd since the computer will run at idle without to much problem some times but when I put some load or strain in the GPU it will crash and reboot to crash again and again and again Like I said the crash is funny in that it will run for a period of time from cold start but when I get the initial crash it will reboot and crash almost imediately or in a couple of minutes There is no particular thing that I'm doing on the system when it crashes the crashes are random Let me give you a run down of the pc and what the error is and the minidumps Also the computer temps are all normal BSOD bccode 116 to let you guys know Windows bit professional Asus P N-D mobo Intel core quad Q OCZ DDR mhz gb Gigibyte geforce GT gb Asus Xonar HDAV sound card Hauppauge Wintv-hvr apevia x-master case with watt included psu The Error Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode BCP FFFFFA A E BCP FFFFF DA BCP BCP OS Version Service Pack Product Please let me know if you need any futher information I really want to fix this pc but I am thinking that the graphics card is bad and need to be returned for a new one but before I do that I would like to know for sure that that is the actual problem and not some programming conflict

A:BSOD bccode 116

  
Quote: Originally Posted by marvs1911


Hi I am having a BSOD on my newly assembled pc that I built. I have not been able to run the computer for more than half a day since I have built it. The crash is wierd since the computer will run at idle without to much problem (some times) but when I put some load or strain in the GPU it will crash and reboot to crash again and again and again. Like I said the crash is funny in that it will run for a period of time from cold start but when I get the initial crash it will reboot and crash almost imediately or in a couple of minutes. There is no particular thing that I'm doing on the system when it crashes the crashes are random. Let me give you a run down of the pc and what the error is and the minidumps. Also the computer temps are all normal to let you guys know.

Windows 7 64 bit professional
Asus P5N-D mobo
Intel core 2 quad Q9400
OCZ DDR2 800mhz 4gb
Gigibyte geforce 9500 GT 1gb
Asus Xonar HDAV 1.3 sound card
Hauppauge Wintv-hvr 2250
apevia x-master case with 500 watt included psu

The Error:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.48
Locale ID: 1033
Additional information about the problem:
BCCode: 116
BCP1: FFFFFA800716A4E0
BCP2: FFFFF88003DA1740
BCP3: 0000000000000000
BCP4: 0000000000000002
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Please let me know if you need any futher information. I really want to fix this pc but I am thinking that the graphics card is bad and need to be returned for a new one but before I do that I would like to know for sure that that is the actual problem and not some programming conflict.



All of these crashes were caused by your dxgkrnl.sys (video driver) I would un-install it and download a fresh copy and install it.

Let us know if you need help

Ken


Code:
032510-36722-01.dmp 3/25/2010 4:34:58 PM DRIVER_IRQL_NOT_LESS_OR_EQUAL 0x000000d1 00000000`058151e3 00000000`00000009 00000000`00000000 fffffa80`03d92aff ntoskrnl.exe ntoskrnl.exe+71f00 x64 C:\Users\K\Desktop\New folder (3)\032510-36722-01.dmp 4 15 7600
032510-36020-01.dmp 3/25/2010 6:21:30 PM 0x00000116 fffffa80`06f614e0 fffff880`04134740 00000000`00000000 00000000`00000002 dxgkrnl.sys dxgkrnl.sys+5cef8 x64 C:\Users\K\Desktop\New folder (3)\032510-36020-01.dmp 4 15 7600
032510-36348-01.dmp 3/25/2010 5:58:32 PM 0x00000116 fffffa80`06f094e0 fffff880`041a5740 00000000`00000000 00000000`00000002 dxgkrnl.sys dxgkrnl.sys+5cef8 x64 C:\Users\K\Desktop\New folder (3)\032510-36348-01.dmp 4 15 7600
032510-38267-01.dmp 3/25/2010 6:26:32 PM 0x00000116 fffffa80`070f74e0 fffff880`04119740 00000000`00000000 00000000`00000002 dxgkrnl.sys dxgkrnl.sys+5cef8 x64 C:\Users\K\Desktop\New folder (3)\032510-38267-01.dmp 4 15 7600
032610-35630-01.dmp 3/26/2010 7:46:12 PM 0x00000116 fffffa80`0408f010 fffff880`04161740 00000000`00000000 00000000`00000002 dxgkrnl.sys dxgkrnl.sys+5cef8 x64 C:\Users\K\Desktop\New folder (3)\032610-35630-01.dmp 4 15 7600
032610-35864-01.dmp 3/26/2010 7:30:08 PM 0x00000116 fffffa80`0729a4e0 fffff880`041b9740 00000000`00000000 00000000`00000002 dxgkrnl.sys dxgkrnl.sys+5cef8 x64 C:\Users\K\Desktop\New folder (3)\032610-35864-01.dmp 4 15 7600
032610-40934-01.dmp 3/26/2010 4:07:36 PM 0x00000116 fffffa80`0716a4e0 fffff880`03da1740 00000000`00000000 00000000`00000002 dxgkrnl.sys dxgkrnl.sys+5cef8 x64 C:\Users\K\Desktop\New folder (3)\032610-40934-01.dmp 4 15 7600
032710-35162-01.dmp 3/27/2010 12:01:36 PM ... Read more

http://www.sevenforums.com/bsod-help-support/74712-bsod-bccode-116-a.html
Relevancy 47.73%

Hi. Recently my computer (7 Ultimate x64) has been getting this BSOD pretty frequently. I can say a little confidently that it happens a lot when I'm watching a stream, but I'm not quite sure if that's it.
I have run MalwareBytes, scanned with eSet, and Norton Security Suite is installed and none of these have detected anything.
I have also run a memory test and done chkdsk and nothing has come up.
I cannot figure out what the problem is here.
I have attached my most recent minidump
Attachment 170992

Any help/advice is much appreciated. Thanks!

A:BSOD BCCode 50. Please help.

  
Quote: Originally Posted by eyunter


Hi. Recently my computer (7 Ultimate x64) has been getting this BSOD pretty frequently. I can say a little confidently that it happens a lot when I'm watching a stream, but I'm not quite sure if that's it.
I have run MalwareBytes, scanned with eSet, and Norton Security Suite is installed and none of these have detected anything.
I have also run a memory test and done chkdsk and nothing has come up.
I cannot figure out what the problem is here.
I have attached my most recent minidump
Attachment 170992

Any help/advice is much appreciated. Thanks!



Difficult to diagnose from one DMP. One thing of note is your Symantec. I would remove it and replace with Microsoft Security Essentials

Download and run the Norton Removal Tool to uninstall your Norton product | Norton Support

Virus, Spyware & Malware Protection | Microsoft Security Essentials

http://www.sevenforums.com/bsod-help-support/181798-bsod-bccode-50-please-help.html
Relevancy 47.73%

Occurs often, especially when using many applications simultaneously.

A:BSOD, BCCode: 7f

42 memory dumps from 20 Jan to 9 Mar 2010
All but one are STOP 0x7F's (more info here: BSOD Index ). The other one is a STOP 0x116 (more info here: BSOD Index )

The STOP 0x116 is from 20 Jan - and there wasn't another BSOD until 18 Feb. Did you do something around that time to fix the problem (particularly something involving the video card)?

The STOP 0x7F errors seem to blame NETIO.SYS - a component of Windows Networking. I'd first suspect the Zone Alarm installation and would suggest uninstalling it completely to see if it fixes things for you.

If that doesn't fix things, then I'd suggest downloading a fresh copy of your networking drivers - then uninstall the current one's (to remove any corruption), then install the freshly downloaded copy.

Please post back if that doesn't fix things (so we can run further tests).

Here's a summary of the BSOD's:

Code:
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Wed Jan 20 02:53:31.464 2010 (GMT-5)
System Uptime: 0 days 0:51:44.306
*** WARNING: Unable to verify timestamp for dxgkrnl.sys
*** ERROR: Module load completed but symbols could not be loaded for dxgkrnl.sys
BugCheck 116, {fffffa8003df6010, fffff880044daf90, ffffffffc000009a, 4}
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+5e7f90 )
DEFAULT_BUCKET_ID: GRAPHICS_DRIVER_TDR_FAULT
PROCESS_NAME: System
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Wed Feb 17 18:08:49.067 2010 (GMT-5)
System Uptime: 0 days 0:49:50.908
BugCheck 7F, {8, 80050031, 406f8, fffff8000347e85f}
Probably caused by : ntkrnlmp.exe ( nt!KiDoubleFaultAbort+b2 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Fri Feb 19 18:59:51.866 2010 (GMT-5)
System Uptime: 0 days 0:12:32.707
BugCheck 7F, {8, 80050031, 406f8, fffff8000347a9c6}
Probably caused by : ntkrnlmp.exe ( nt!KiDoubleFaultAbort+b2 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Wed Feb 24 11:05:37.881 2010 (GMT-5)
System Uptime: 0 days 0:05:44.722
BugCheck 7F, {8, 80050031, 406f8, fffff800034909c6}
Probably caused by : ntkrnlmp.exe ( nt!KiDoubleFaultAbort+b2 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Sat Feb 27 03:38:12.533 2010 (GMT-5)
System Uptime: 0 days 0:02:12.250
BugCheck 7F, {8, 80050031, 406f8, fffff8000347e9c6}
Probably caused by : ntkrnlmp.exe ( nt!KiDoubleFaultAbort+b2 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Fri Feb 26 22:27:23.652 2010 (GMT-5)
System Uptime: 0 days 0:52:00.493
BugCheck 7F, {8, 80050031, 406f8, fffff8000347985f}
Probably caused by : ntkrnlmp.exe ( nt!KiDoubleFaultAbort+b2 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Sat Feb 27 00:48:29.418 2010 (GMT-5)
System Uptime: 0 days 0:17:16.259
BugCheck 7F, {8, 80050031, 406f8, fffff800034d085f}
Probably caused by : ntkrnlmp.exe ( nt!KiDoubleFaultAbort+b2 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-... Read more

http://www.sevenforums.com/bsod-help-support/69520-bsod-bccode-7f.html
Relevancy 47.73%

Hi Guys

I been trying rack my brains on how to solve this problem without any success I have searched the web for hours

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 2057

Additional information about the problem:
BCCode: 3b
BCP1: 00000000C0000005
BCP2: FFFFF960000F6EC8
BCP3: FFFFF88008272540
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\041512-26364-01.dmp
C:\Users\hyperk\AppData\Local\Temp\WER-86798-0.sysdata.xml


can you pls help

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 2057

Additional information about the problem:
BCCode: 3b
BCP1: 00000000C0000005
BCP2: FFFFF960000F6EC8
BCP3: FFFFF88008272540
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\041512-26364-01.dmp
C:\Users\hyperk\AppData\Local\Temp\WER-86798-0.sysdata.xml

Spec Althon II X2 250
12GB DDR3 1333Mhz PC3 10666

cheers
 

A:BSOD BCCode: 3b

0x3B errors are usually caused by faulty video card drivers. If you haven't already done so updated your video card drivers to the latest offerings from the manufacture.
 

http://www.techspot.com/community/topics/bsod-bccode-3b.179933/
Relevancy 47.73%

I'm suffering from an occasional BSOD. Sometimes it happens during gaming, but it might also just happen when I'm browsing the internet.
I've put the dump files etc in the attachments.

Can someone please tell me what's causing this?
Windows 7 is . . .
- x64 - the original installed OS on the system? ( Yes )
- an OEM or full retail version? ( Full Retail )
- What is the age of system (hardware)? ( Most hardware is 3 year old )
- What is the age of OS installation (have you re-installed the OS?) ( OS is new since Jan 2011 )

A:BSOD, BCCode f4

  
Quote: Originally Posted by Raptor1


I'm suffering from an occasional BSOD. Sometimes it happens during gaming, but it might also just happen when I'm browsing the internet.
I've put the dump files etc in the attachments.

Can someone please tell me what's causing this?
Windows 7 is . . .
- x64 - the original installed OS on the system? ( Yes )
- an OEM or full retail version? ( Full Retail )
- What is the age of system (hardware)? ( Most hardware is 3 year old )
- What is the age of OS installation (have you re-installed the OS?) ( OS is new since Jan 2011 )


All of these since your upgrade to PS-1 are related to nssm.sys. I cant find any info about it other than a military application so if it isnt critical I would remove it.

http://www.sevenforums.com/bsod-help-support/194135-bsod-bccode-f4.html
Relevancy 47.73%

Hey fellas,seems that I can't get this to work out,no matter what I do,I get this damn Bsod

Additional information about the problem:
BCCode: d1
BCP1: 0000000100000070
BCP2: 0000000000000002
BCP3: 0000000000000000
BCP4: FFFFF88004AC0887
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\111715-13759-01.dmp
C:\Users\Alexanderd\AppData\Local\Temp\WER-50778-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt


It's just came out of nowhere and I get it after a few minutes of gaming.I didn't install anything new ,I did the test for memory,cpu and all in vain.

Relevancy 47.73%

Suddenly getting a BSOD upon BCCode - 116 BSOD trying to log on to Windows normally BCCode This is a very new installation of Windows on a new hard drive I was here recently with issues with my old one so I doubt my Windows installation has anything to do with it Immediately upon finding out was video-related I uninstalled all nVidia drivers the last time Windows Update was allowed to BSOD - BCCode 116 run the individual who did it selected the video drivers from the optional section which installed both the D Vision and HD Audio drivers BSOD - BCCode 116 both of which are useless and cause problems in a lot of cases and did a fresh clean install of JUST the video driver Again when logging on to Windows normally I instantly get a BSOD instead of the logon screen Video signal cuts off like there was a driver failure how it sometimes occurs while Windows is running but fixes itself and blinks back on I see the quot No Signal quot message on my monitor and then the BSOD flashes by In any event here is the zip file from the SF Diagnostic Tool Thanks for looking Attachment I fear my video card may have just died on me It's gotten -heavy- use all these years it's an EVGA Superclocked GTX and has been a real trooper Also worth noting aside from a fresh installation of the newest drivers the ones I mentioned that were installed via Windows Update were done days before this happened I also tried removing the PCIe power connections from the video card and tried different cables in different sockets on my PSU same results sadly

A:BSOD - BCCode 116

Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

If the test passed good, Install the display driver 314.22 WHQL only.
Uninstall All nvidia items in Control Panel > Programs and features3D Vision Control Driver
3D Vision Driver
Graphics Driver
HD Audio Driver
PhysX
nvidia Update
(Are you using nvidia chipset drivers? If so, dont uninstall anything other than those are listed).
Now follow Drivers - Clean Left over Files after Uninstalling
Download 314.22 WHQL. While installing, Select Custom (Advanced) install. In the next page, follow this settings:
Is the computer hot? Report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy.
Check if the Power Supply Unit (PSU) supplying adequate power to the computer or not.
eXtreme Power Supply Calculator
Also let us know the wattage of the PSU.

http://www.sevenforums.com/bsod-help-support/308171-bsod-bccode-116-a.html
Relevancy 47.73%

Is Windows Professional x its the original OS on the system it is less than one month old hardware never reinstalled OS and it is less than one month old as well So I was running crysis fine after I tried playing around with CUDA I can't play crysis anymore I get a BSOD with information bellow I tried resintalling drivers as instructed on other posts to no avail I have all the latest drivers Attached is the Windows NT BSOD jcgriff folder the PERFMON HTML and the DUMP file in case it 116 BSOD BCCode: helps On cyrsis I never see the BSOD per se my display goes black and my computer freezes on Furmark i'm able to max out GPU temperature C without problems my GPU is not OC'ed Thanks in advance Code Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode BCP FFFFFA C C E BCP FFFFF F BCP FFFFFFFFC A BCP OS Version Service Pack Product

A:BSOD BCCode: 116

  
Quote: Originally Posted by wesilveira


Is Windows 7 Professional x64 its the original OS on the system it is less than one month old hardware (never reinstalled OS and it is less than one month old as well.) So I was running crysis fine after I tried playing around with CUDA I can't play crysis anymore I get a BSOD with information bellow. I tried resintalling drivers (as instructed on other posts) to no avail, I have all the latest drivers. Attached is the Windows_NT6_BSOD_jcgriff2 folder, the PERFMON HTML, and the DUMP file (in case it helps.) On cyrsis I never see the BSOD per se my display goes black and my computer freezes, on Furmark i'm able to max out GPU temperature (85 C) without problems (my GPU is not OC'ed.) Thanks in advance!


Code:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.48
Locale ID: 1033

Additional information about the problem:
BCCode: 116
BCP1: FFFFFA8011C8C4E0
BCP2: FFFFF880080216F0
BCP3: FFFFFFFFC000009A
BCP4: 0000000000000004
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1



These are all virtually identical. They are a classic video card reset. The system found a video problem and attempted to reset the video card but it took too long to respond so the crash.

I know you have installed the video drivers but give it another try this way.


Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\K\Desktop\Windows_NT6_BSOD_jcgriff2\032711-16208-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols;srv*e:\symbols
*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16695.amd64fre.win7_gdr.101026-1503
Machine Name:
Kernel base = 0xfffff800`0320d000 PsLoadedModuleList = 0xfffff800`0344ae50
Debug session time: Sun Mar 27 10:34:58.129 2011 (GMT-4)
System Uptime: 0 days 0:50:29.004
Loading Kernel Symbols
...............................................................
................................................................
..........................................................
Loading User Symbols
Loading unloaded module list
..............
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 116, {fffffa8011c8c4e0, fffff880080216f0, ffffffffc000009a, 4}

Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+7dd6f0 )

Followup: MachineOwner
---------

7: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

VIDEO_TDR_FAILURE (116)
Attempt to reset the display driver and recover from timeout failed.
Arguments:
Arg1: fffffa8011c8c4e0, Optional pointer to internal TDR recovery context (TDR_RECOVERY_CONTEXT).
Arg2: fffff880080216f0, The pointer into... Read more

http://www.sevenforums.com/bsod-help-support/153226-bsod-bccode-116-a.html
Relevancy 47.73%

The BSOD occurs commonly when restarting. It'll happen randomly when web browsing also. I've noticed that the ethernet connection cannot connect to the internet. I'll have to install a wireless usb adapter and connect that way. I've completely reinstalled Windows 7 and the BSOD error still occurs. the SF zip is attached.

A:BSOD BCCode 1e

Hi lmxru,

Both system crashes seem to be caused by the 'ntkrnlmp.exe' driver; KMODE_EXCEPTION_NOT_HANDLED (1e).
his is a very common bugcheck. Usually the exception address pinpoints
the driver/function that caused the problem.


Code:
Loading Dump File [C:\Errors\SF_13-03-2013\031313-22323-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.18044.amd64fre.win7sp1_gdr.130104-1431
Machine Name:
Kernel base = 0xfffff800`02866000 PsLoadedModuleList = 0xfffff800`02aaa670
Debug session time: Thu Mar 14 03:59:13.029 2013 (UTC + 5:30)
System Uptime: 0 days 0:07:30.262
Loading Kernel Symbols
..

Press ctrl-c (cdb, kd, ntsd) or ctrl-break (windbg) to abort symbol loads that take too long.
Run !sym noisy before .reload to track down problems loading symbols.

.............................................................
................................................................
................
Loading User Symbols
Loading unloaded module list
.....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1E, {ffffffffc0000005, fffff80002bd7cda, 1, 18}

Probably caused by : ntkrnlmp.exe ( nt!ObpCreateHandle+29a )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

KMODE_EXCEPTION_NOT_HANDLED (1e)
This is a very common bugcheck. Usually the exception address pinpoints
the driver/function that caused the problem. Always note this address
as well as the link date of the driver/image that contains this address.
Arguments:
Arg1: ffffffffc0000005, The exception code that was not handled
Arg2: fffff80002bd7cda, The address that the exception occurred at
Arg3: 0000000000000001, Parameter 0 of the exception
Arg4: 0000000000000018, Parameter 1 of the exception

Debugging Details:
------------------


EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

FAULTING_IP:
nt!ObpCreateHandle+29a
fffff800`02bd7cda f0480fba6f1800 lock bts qword ptr [rdi+18h],0

EXCEPTION_PARAMETER1: 0000000000000001

EXCEPTION_PARAMETER2: 0000000000000018

WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff80002b14100
0000000000000018

ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

BUGCHECK_STR: 0x1E_c0000005

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

PROCESS_NAME: RtWLan.exe

CURRENT_IRQL: 0

TRAP_FRAME: fffff88002fd2340 -- (.trap 0xfffff88002fd2340)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000000 rbx=0000000000000000 rcx=fffffa80036dd040
rdx=00000000000f001f rsi=0000000000000000 rdi=0000000000000000
rip=fffff80002bd7cda rsp=fffff88002fd24d0 rbp=0000000000000000
r8=fffff8a00288cee0 r9=00000000000000e8 r10=0000000000000000
r1... Read more

http://www.sevenforums.com/bsod-help-support/282207-bsod-bccode-1e.html
Relevancy 47.73%

Hi,

I have a problem with my laptop. This BSOD has occurred many times with unclear cause. I can't quite remember what it says but it has something to do with paging non page-able error
My Hardware:
Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz (4 CPUs), ~2.5GHz
(Vista) ATI Mobility Radeon HD 5730
(for more specific hardware information please check the dxdiag.txt I've attached)
OS: Windows 7 Home Premium 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.110622-1506)

Windows reported the error as this:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 50
BCP1: FFFFFF0001000000
BCP2: 0000000000000000
BCP3: FFFFF800035DC1AA
BCP4: 0000000000000007
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\020312-17440-01.dmp
C:\Users\Philip\AppData\Local\Temp\WER-172646-0.sysdata.xml

Thanks for your help
on my past BSOD it was the wi-fi's outdated driver error, now it seems to be something different

A:BSOD: BCCode:50

> Your problems are probably caused by Symantec which is a frequent cause of BSOD's.
I suggest you remove and replace it with Microsoft Security Essentials AT LEAST TO TEST.

http://us.norton.com/support/kb/web_...080710133834EN

Microsoft Security Essentials - Free Antivirus for Windows

> Drivers that need updating are in the snip below.
Attachment 196620

http://www.sevenforums.com/bsod-help-support/212412-bsod-bccode-50-a.html
Relevancy 47.73%

Hi Hoping someone can give me a hand here - got a Dell Latitude which arrived about weeks ago which has started crashing Can't see anything obvious in the Event Log - just reports that the system has rebooted unexpectedly Get this from the MS Error Reporting thing Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode d BCP FFFFFA E BCP BCP BCP FFFFF ADB OS Version Service Pack Product The user thinks it might d1 BSOD Bccode occur mostly when he is using a G USB BSOD Bccode d1 modem but is not sure Have visited Dell this morning and updated the chipset video and BSOD Bccode d1 bios so this in itself may solve the problem However the owner of the machine is heading to a conference in Switzerland on Sunday and BSOD Bccode d1 I'm hoping to have a little more clarity on what the issue is before then I'm fairly good at XP Win is still a bit of a closed book I'm afraid Can anyone help me out please Errors attached as per BSOD instruction page Machine is a Latitude laptop with gigs of ram running Win Enterprise bit as installed by the university's IT department not OEM Thanks -d- Cape Town

A:BSOD Bccode d1

Hello jennanza & Welcome to SevenForums!

First thing to do.

You have this "Globetrotter 3g or Option Icon 225 USB data stick from Orange" that's causing your BSOD. Do you know this? Consider hardly to update the driver for it as it's 4 years old.

Software download | Option

LMVM *gt72ubus*

Code:
0: kd> lmvm gt72ubus
start end module name
fffff880`088c7000 fffff880`088df000 gt72ubus T (no symbols)
Loaded symbol image file: gt72ubus.sys
Image path: \SystemRoot\system32\DRIVERS\gt72ubus.sys
Image name: gt72ubus.sys
Timestamp: Tue Oct 09 13:53:29 2007 (470B6BB9)
CheckSum: 0001627B
ImageSize: 00018000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
We'll continue troubleshooting after we fixed this type of error.

Best Regards,
FredeGail

The rest of the dumps contain this error message.

http://www.sevenforums.com/bsod-help-support/180473-bsod-bccode-d1.html
Relevancy 47.73%

I've blue screened three times in the last week. I updated all my drivers and just blue screened again and I'm not sure what to do next.
My build:
2x 2gb Muskin 1600 mhz RAM
OCZ Vertex 2 50gb SSD
Radeon HD 5830 GPU
AMD Phenom II x4 965 BE Overclocked @ 4.0 ghz

Here is the exact error:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.48
Locale ID: 1033

Additional information about the problem:
BCCode: 124
BCP1: 0000000000000000
BCP2: FFFFFA8004489028
BCP3: 00000000B2674000
BCP4: 0000000000000175
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

And the minidump:
http://www.mediafire.com/?t88zm76bltuy81n

Thanks in advance to anyone who can help me
 

A:BSOD BCCode 124

Start by doing some hardware checks, as 0x124 is usually a hardware problem.

First comes RAM: http://www.sevenforums.com/tutorials/105647-ram-test-memtest86.html

Next is CPU/temps: http://www.sevenforums.com/tutorials/100352-cpu-stress-test-prime95.html

Then GFX card: http://www.sevenforums.com/tutorials/100356-video-card-stress-test-furmark.html

You may also remove Avast with this tool: http://files.avast.com/files/eng/aswclear5.exe

Replace it with MSE: http://www.microsoft.com/security_essentials

I'm not sure if Avast can cause a 0x124 error, but it's still worth a try, as Avast is known to cause BSODs on some systems.
Code:

Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Jonathan\Desktop\Downloads\091810-10514-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Machine Name:
Kernel base = 0xfffff800`02c09000 PsLoadedModuleList = 0xfffff800`02e46e50
Debug session time: Sat Sep 18 22:11:45.790 2010 (UTC - 4:00)
System Uptime: 3 days 4:08:59.398
Loading Kernel Symbols
...............................................................
................................................................
....................................
Loading User Symbols
Loading unloaded module list
.....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 124, {0, fffffa8004489028, b2674000, 175}

Probably caused by : hardware

Followup: MachineOwner
---------

3: kd> lmntsm
start end module name
fffff880`04000000 fffff880`0403e000 1394ohci 1394ohci.sys Mon Jul 13 20:07:12 2009 (4A5BCC30)
fffff880`00eed000 fffff880`00f44000 ACPI ACPI.sys Mon Jul 13 19:19:34 2009 (4A5BC106)
fffff880`02b2b000 fffff880`02bb5000 afd afd.sys Mon Jul 13 19:21:40 2009 (4A5BC184)
fffff880`03fd9000 fffff880`03fef000 AgileVpn AgileVpn.sys Mon Jul 13 20:10:24 2009 (4A5BCCF0)
fffff880`03f7d000 fffff880`03f92000 amdppm amdppm.sys Mon Jul 13 19:19:25 2009 (4A5BC0FD)
fffff880`04eec000 fffff880`04f01000 AmdTools64 AmdTools64.sys Tue Jun 27 15:24:21 2006 (44A185E5)
fffff880`00ec0000 fffff880`00ecb000 amdxata amdxata.sys Tue May 19 13:56:59 2009 (4A12F2EB)
fffff880`0703a000 fffff880`07043000 aswFsBlk aswFsBlk.SYS Tue Sep 07 10:47:09 2010 (4C86506D)
fffff880`07000000 fffff880`0703a000 aswMonFlt aswMonFlt.sys Tue Sep 07 10:47:32 2010 (4C865084)
fffff880`02bb5000 fffff880`02bbf000 aswRdr aswRdr.SYS Tue Sep 07 10:47:47 2010 (4C865093)
fffff880`03f34000 fffff880`03f57000 aswSP aswSP.SYS Tue Sep 07 10:52:07 2010 (4C865197)
fffff880`02b1b000 fffff880`02b2b000 aswTdi aswTdi.SYS Tue Sep 07 10:52:27 2010 (4C8651AB)
fffff880`08726000 fffff880`08731000 asyncmac asyncmac.sys Mon Jul 13 20:10:13 2009 (4A5BCCE5)
fffff880`00e8d000 fffff880`00e96000 atapi atapi.sys Mon Jul 13 19:19:47 2009 (4A5BC113)
fffff880`00e96000 fffff880`00ec0000 ataport ataport.SYS Mon Jul 13 19:19:52 2009 (4A5BC118)
fffff880`04f9a000 fffff880`04fba000 AtihdW76 AtihdW76.sys Thu Jul 15 08:46:49 2010 (4C3F0339)
fffff880`04666000 fffff880`04dd4000 atikmdag atikmdag.sys Tue Aug 03 21:39:08 2010 (4C58C4BC)
fffff880`03f92000 fffff880`03fd9000 atikmpag atikmpag.sys Tue Aug 03 21:15:45 2010 (4C58BF41)
fffff960`00960... Read more

https://forums.techguy.org/threads/bsod-bccode-124.950875/
Relevancy 47.73%

I would like BCcode: BSOD 124 to say quot hello quot to everyone here as this is my first topic on these forums I was quot forced quot to make an account and start this BSOD BCcode: 124 thread because I m experiencing a very annoying error on my new pc First the error text Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode BCP BCP FFFFFA CA B BCP BCP OS Version Service Pack Product Files that help describe the problem C Windows Minidump - - dmp C Users RaptoR AppData Local Temp WER- - sysdata xml Link for the dump http www mediafire com lz om p ieo c Now let me explain I mainly get this error when playing games TDU and Skyrim are just of the games i played and encounter this error In Skyrim the screen freezes and I get some stripes kinda different from the stripes I got some years ago when my graphic card was faulty so I guess they re not artefacts from video card problems In TDU the screen just goes black The only sollution is to restart the PC and after I do that I get that error text comming up Now like every sane person first thing I did was to check the temperatures and the voltages The proc stays at around in idle and - full load alt tab when playing a game The GPU reaches about - full load but the fan isn t spinning top speed which tells me it can handle a way bigger temperature The voltages are also pretty ok the normal - Now next step was to google my problem Man I was happy when I saw there are loads of threads on the subject Said to myself that will be easy to fix it but found out the error is caused by many things and what applied to others didn t applied to me What I tried based on recomandations from the other forums topics -stressed my proc to the limits with prime The temp stays somewhere under degrees after - hours of running prime Tried every test and my proc passed them all without crashing or anything -next step was the ram First I check with the Windows tool passes extended test Passed Next I checked with memtest Left it running for abut hours closed it mins ago without any single error -double check every setting in BIOS every reverting to defaults and then tampering with settings some more The proc is on stock frequency fsb multiplier x memory is downclocked from to my mobo only supports DDR -Double check every single cable in the pc including the power supply ones Removed the dvd-rw and my secondary IDE HDD just to make sure After all that mins before beginning to write this topic BAM played TDU for mins and got the freeze So where should I go from here All the components are brand new bought like month ago and have warranty I just need to identify the faulty component so I can go change it P S I don t always get the error fast Sometimes I play - hours w o getting it sometimes after mins I m willing to install uninstall anything but please PLEASE let s leave quot Reinstall Windows quot as a last solution Thanks in advance to anyone willing to help and sorry if my English is not stellar I m not a native English speaker nbsp

https://forums.techguy.org/threads/bsod-bccode-124.1037100/
Relevancy 47.73%

Hi there,
Can anyone advise?
All available updates installed.

OS: Windows 7 Home Premium x64
System: Lenovo IdeaCentre B320
Age of the system: 8 months
Age of the current OS: 8 months

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1029

Additional information about the problem:
BCCode: f4
BCP1: 0000000000000003
BCP2: FFFFFA80055C97D0
BCP3: FFFFFA80055C9AB0
BCP4: FFFFF80002F8A510
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

A:BSOD BCCode: f4

It happens absolutely randomly, today 5 times within what felt like and hour and nothing the rest of the day.. Wast doing anything particular during that time, all usual facebook, skype etc.

If you guys get a chance to have a look I would be super happy for any help!
Thank you so much in advance!
E.

http://www.sevenforums.com/bsod-help-support/237821-bsod-bccode-f4.html
Relevancy 47.73%

WIN 7 ULTI X 64
gigabyte ga-z68x-ud3h-b3
MSI GTX 560ti SLI
Intel Core i5-2500K Processor

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033
Additional information about the problem:
BCCode: 24
BCP1: 00000000001904FB
BCP2: FFFFF8800B697AC8
BCP3: FFFFF8800B697320
BCP4: FFFFF880012289D1
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1
Files that help describe the problem:
C:\Windows\Minidump\050812-10748-01.dmp
C:\Users\G\AppData\Local\Temp\WER-15038-0.sysdata.xml

I didn't have enough info on the last post, that's why I make this one. Please help me. My computer was running normally before I cleaned the MB.

A:BCCode:24 BSOD

So this all only started happening as soon as after you cleaned the motherboard? If that's the case, you most likely shorted the board while cleaning it, or perhaps incidentally scuffed up dust that settled in a bad spot. Also, double-check to make sure that your cables and all are plugged in properly, your cards are properly seated, and if you re-seated the heatsink when you cleaned the motherboard that you may need to do it again (make sure to clean off any existing thermal paste and apply a new layer).

This one crashdump just notifies of an NTFS issue. I cannot determine exact cause without more crashdumps. It's preferred that you start up Driver Verifier and let it crash a few more times. When you are at the part to select which checks to do in DV, do not select IRP Logging, Force Pending I/O Request, and Low Resource Sim. The rest you can select. Make sure to restart PC after everything is finished setting up.

http://www.sevenforums.com/bsod-help-support/228687-bccode-24-bsod.html
Relevancy 47.73%

Hi Folks,

In the last week, my PC has been experiencing a crash dump every night after I put it into sleep mode before retiring for the evening. Below is the latest BSOD summary report. I have also attached the necessary files as shown in the report for your analyses. Any help would be greatly appreciated! Thanks! /Mandla

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033


Additional information about the problem:
BCCode: 9f
BCP1: 00000003
BCP2: 85566AB0
BCP3: 82B33AE0
BCP4: 85BB74B8
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1


Files that help describe the problem:
C:\Windows\Minidump\071212-17643-01.dmp
C:\~\AppData\Local\Temp\WER-160150-0.sysdata.xml

A:WIN 7 BSOD: BCCode: 9f

It looks like you forgot to attach the files. It happens.

http://www.sevenforums.com/bsod-help-support/240046-win-7-bsod-bccode-9f.html
Relevancy 47.73%

the computer was put together and windows 7 was installed on 14/7/10. (3 days ago)

Here is a link to the mindump files.(I did read the BSOD rules but i couldn't get the program to work)

http://cid-cc1af7ba51804e72.office.live.com/browse.aspx/MiniDump

I have recently put together a new computer and have started to have BlueScreens. The beep code is always 7f and here the BCP:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.48
Locale ID: 2057
Additional information about the problem:
BCCode: 7f
BCP1: 0000000000000008
BCP2: 0000000080050031
BCP3: 00000000000006F8
BCP4: FFFFF80003056E60
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

This is another BlueScreen that had a different BCP4.
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.48
Locale ID: 2057
Additional information about the problem:
BCCode: 7f
BCP1: 0000000000000008
BCP2: 0000000080050031
BCP3: 00000000000006F8
BCP4: FFFFF80003056CC0
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1
These Bluescreens have happened randomly, some when Idle, online and gaming.
Any help will be greatly recieved.

A:BSOD BCCode 7f

This may be of help.

Stop error message when you run an application that transfers data by using the UDP protocol in Windows Server 2008 R2 or in Windows 7: "STOP 0x0000007F"

http://www.sevenforums.com/bsod-help-support/98094-bsod-bccode-7f.html
Relevancy 47.73%

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: f4
BCP1: 0000000000000003
BCP2: FFFFFA8008D6FB30
BCP3: FFFFFA8008D6FE10
BCP4: FFFFF8000337E510
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\080812-41153-01.dmp
C:\Users\bartheld\AppData\Local\Temp\WER-62384-0.sysdata.xml

Read our privacy statement online:
http://go.microsoft.com/fwlink/?li [...] cid=0x0409

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
 

A:BSOD BCCode F4

Just started up computer and got PFN_LIST_CORRUPT
 

http://www.techspot.com/community/topics/bsod-bccode-f4.183963/
Relevancy 47.73%

For the last week or so I have been getting random BSODs that happen pretty much no matter what I'm doing. Here is what info I have on it. It shouldn't be my video card as I removed it and still got a BSOD without it. I did a mem test and my RAM checked out ok. Latest dump and dxdiag attached.

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.48
Locale ID: 1033

Additional information about the problem:
BCCode: 124
BCP1: 0000000000000000
BCP2: FFFFFA8002B7F038
BCP3: 00000000B6000000
BCP4: 0000000000000181
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\081210-17518-01.dmp
C:\Users\Jeff\AppData\Local\Temp\WER-29312-0.sysdata.xml
 

Relevancy 47.73%

hello all,

First of all im new to forrums so if you guys can help me that would be great,

I have a pc that gives a few bsod's here is a small list:

IQRL_NOT_LESS_OR_EQUAL
MEMORY_MANAGEMENT
PAGE_FAULT_IN_NONPAGED_AREA

Also i get these errors quite often these last days:
32e6a38e86e6c06968db06f5c868d340.png

It says ''Video hardwarefault (problem)

(EDIT) this are my PC specs: 80c2713d99043293df5d8248bf07c6e3.png
So what can it be?
My Pc is clean from dust so i know that is not the problem.

Also i've updated my BIOS because the Casefan was spinning like a crazy man and it was mesuring the wrong temp's (70c at startup in BIOS menu) so i've updated it. i gave this info to you guys becouse it may help .

i hope someone knows what to do.

greetz,
jesse

A:BSOD BCCode 1e

Post it following the Blue Screen of Death (BSOD) Posting Instructions.

Fill up your system specs.
See your system specs and fill it up here.

http://www.sevenforums.com/bsod-help-support/313633-bsod-bccode-1e.html
Relevancy 47.73%

I'm experiencing bluescreens every 2 - 5 days with BCCode 50. I followed your recommendation using Driver Verifier and encountered a bluescreen on re-boot. Attached .dmp file was created. Will appreciate your assistance to resolve the issue.

Thanks!

A:BSOD: BCCode 50

Hi I will move you too bsod's and app hangs please also note there is no dump file

http://www.techsupportforum.com/forums/f299/bsod-bccode-50-a-576841.html
Relevancy 47.73%

My Laptop gave Blue Screen and restarted.
later, it showed Error code "BCCode 1a"
please help.

"Windows_NT6_BSOD_jcgriff2 folder" & "the PERFMON HTML file" is attached as zip file.

basic system spec
Windows 7 Professional x64 service pack 1
Original OEM
age of system: One year [approximately]
age of OS installation: two months

Relevancy 47.73%

System Specs:

Intel Quad Core Q8400 @2.66Ghz
Nvidia Geforce GTS 450
MSI G41TM-P31
4GB DDR2 PC2-6400
1TB Samsung HDD
Corsair TX 500W PSU
Windows 7 Home 64-Bit

Hello there, I have been having a lot of BSOD problems for the past month or so which coincided with when I purchased Arma II for the popular DayZ mod. I don't know if this is a coincidence or the route of the problem. I'm experiencing:

Random BSOD
Random freezing (I might be web browsing and listening to music and then my computer will freeze and cease my computer to function)

I've tried a lot to resolve the problem, such as performing checks through Windows such as checking memory, performing system restore, resolving problems on startup etc. Below I have created a .rar file as listed in the stickied thread.

Thanks in advance.

A:BSOD BCCode 1e

Hello Billsy. Welcome to Seven Forums.

This looks like a memory issue. Please, test your RAM - Test with Memtest86+

Also, there have been 4 BIOS revisions since your current was released. It may not be necessary to update your BIOS. There are some stability issues addressed though. If you choose to update your BIOS, you do so at your own risk. MSI Global ? Mainboard - G41TM-P31

http://www.sevenforums.com/bsod-help-support/236025-bsod-bccode-1e.html
Relevancy 47.73%

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 2057

Additional information about the problem:
BCCode: 116
BCP1: FFFFFA8007DC0010
BCP2: FFFFF880105BDC88
BCP3: FFFFFFFFC000009A
BCP4: 0000000000000004
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

after taking a look at the dmp file I thought it's cause by my nvidia driver for my GTX 460

my computer specs are

Windows 7 Ultimate 64-bit
AMD Phenom(tm) II X6 1090T Processor (6 CPUs), ~3.2GHz
4gig Corsair Dominator GT ram
NVIDIA GeForce GTX 460
Artic cooler 7 pro
ASUS M4N75TD

all components are retail

http://www.sevenforums.com/crashes-d...tructions.html
just noticed this, will run the executable file and post it in a follow up post

A:BSOD BCCode:116

Troubleshooting guide for STOP 0x116: STOP 0x116: VIDEO_TDR_ERROR troubleshooting

I'm headed out to dinner and will give the uploaded file a look later on.

http://www.sevenforums.com/bsod-help-support/113958-bsod-bccode-116-a.html
Relevancy 47.73%

Hello Thank you for reading this My computer is new I built it less than months ago It has BSOD Please BCCode: 124 :) Help : been running fine for that time without any issue whatsoever Today BSOD : BCCode: 124 Help Please :) I started getting BSOD's when I run games Seeing pnkbstrb exe in this probably indicates that punkbuster the anticheat for Battlefield Bad Company is causing some problems BSOD Info Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode BCP BCP FFFFFA FA BCP BF BCP OS Version Service Pack Product Minidump Info Retrieved using Windbg Microsoft reg Windows Debugger Version AMD Copyright copy BSOD : BCCode: 124 Help Please :) Microsoft Corporation All rights reserved Loading Dump File C Windows Minidump - - dmp Mini Kernel Dump File Only registers and stack trace are available Symbol search path is SRV E Symbols http msdl microsoft com download symbols Executable search path is Windows Kernel Version Service Pack MP procs Free x BSOD : BCCode: 124 Help Please :) Product WinNt suite TerminalServer SingleUserTS Personal Built by amd fre win sp gdr - Machine Name Kernel base xfffff e PsLoadedModuleList xfffff a Debug session time Tue Apr UTC System Uptime days Loading Kernel Symbols Loading User Symbols Loading unloaded module list Bugcheck Analysis Use analyze -v to get detailed debugging information BugCheck fffffa fa bf Probably caused by GenuineIntel Followup MachineOwner --------- kd gt analyze -v Bugcheck Analysis WHEA UNCORRECTABLE ERROR A fatal hardware error has occurred Parameter identifies the type of error source that reported the error Parameter holds the address of the WHEA ERROR RECORD structure that describes the error conditon Arguments Arg Machine Check Exception Arg fffffa fa Address of the WHEA ERROR RECORD structure Arg bf High order -bits of the MCi STATUS value Arg Low order -bits of the MCi STATUS value Debugging Details ------------------ BUGCHECK STR x GenuineIntel CUSTOMER CRASH COUNT DEFAULT BUCKET ID WIN DRIVER FAULT PROCESS NAME PnkBstrB exe CURRENT IRQL f STACK TEXT fffff f da fffff e ea b fffffa fa bf nt KeBugCheckEx fffff f da fffff ff fffffa ed b fffffa ed bc hal HalBugCheckSystem x e fffff f daa fffff e e fffffa ed b fffff f de fffff f de nt WheaReportHwError x fffff f db fffff e e fffffa ed b fffff f de fffffa ed b hal HalpMcaReportError x c fffff f dc fffff e df d fffff f deb hal HalpMceHandler x e fffff f dc fffff e e hal HalpMceHandlerWithRendezvous x fffff f dcc fffff ed c hal HalHandleMcheck x fffff f dcf fffff ed nt KxMcheckAbort x c fffff f de fffff ed e nt KiMcheckAbort x fffff de nt memmove xb STACK COMMAND kb FOLLOWUP NAME MachineOwner MODULE NAME GenuineIntel IMAGE NAME GenuineIntel DEBUG FLR IMAGE TIMESTAMP FAILURE BUCKET ID X x GenuineIntel PROCESSOR MAE BUCKET ID X x GenuineIntel PROCESSOR MAE Followup MachineOwner --------- I have attached a dxdiag file just because I could Please note I have read around this topic already AVG and Malwarebytes are currently in progress I do not have a CD burner so I cannot burn Memtest to a cd and boot from it I do have memory sticks if someone can tell me if that works and how I do have my windows disc so I can do repairs Please inform me if doing this will format anything as backing up is a big deal for me I appreciate any all help or advice Thank you everyone Edit I do not overclock anything I do not use MSI afterburner I have sufficient cooling I have turned off all programs that could conflict with it even firewalls etc

A:BSOD : BCCode: 124 Help Please :)

Can you uninstall Punkbuster and test ?. If you don't play online you don't need Punkbuster. If you play online try uninstall it and update to the latest version available.
 
 http://www.evenbalance.com/?page=pbsetup.php

http://www.bleepingcomputer.com/forums/t/491186/bsod-bccode124-help-please/
Relevancy 47.73%

Hi, I was browsing, then I got BSOD

my specs:

asus crosshair iv formula
phenom x4 965 3.4ghz
8gb ram
hd 5670
2x hd 500gb samsung - raid

Give me a hand, please

Thanks

A:BSOD - bccode 124

Please remove any CD/DVD virtualization software, such as Daemon Tools/Alcohol 120%, as they use a driver called sptd.sys that is known to cause BSODs. Use add/remove programs to remove the software. After removing the software, use the sptd.sys uninstaller to remove sptd.sys from the system.

I prefer TotalMounter as my CD/DVD virtualization software as it allows me to burn images to a virtual CD/DVD if I just want an ISO file instead of a disc, and it is free.

Many use MagicISO - Convert BIN to ISO, Create, Edit, Burn, Extract ISO file, ISO/BIN converter/extractor/editor as well, which is also free.
You have a 0x124 hardware bugcheck. If the system is still under warranty, I would recommend sending it in to have diagnostic tests done and any bad hardware replaced.


   Warning
Before you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. WARNING: The steps that follow can void your warranty!!!

For your hardware stop 0x124 crash, read through Stop 0x124 - what it means and what to try and use the following hardware checks to supplement that link.
If you are overclocking any hardware, please stop.

Monitor temperatures during the following tests. Use the following programs to monitor the temperatures. Real Temp is a good CPU temperature monitor.
Speccy - System Information - Free Download will monitor all hardware temperatures.
HWiNFO, HWiNFO32 & HWiNFO64 - Hardware Information and Analysis Tools can be inaccurate for CPU temperatures, but is a good program for GPU temperature monitoring.
Use FurMark: VGA Stress Test, Graphics Card and GPU Stability Test, Burn-in Test, OpenGL Benchmark and GPU Temperature | oZone3D.Net to test the graphics card GPU. Let it run until the GPU temperatures even out or until the GPU temperatures reach a dangerous level (you can find the max temperature for your card on either the nVidia or AMD sites; if you are not sure, ask us). The goal is to get a steady temperature, find out if the GPU is overheating, or to see if there are any artifacts present in the test itself: look for strange pixelated patterns on the screen or colors that do not look like they belong. Then use the |MG| Video Memory Stress Test 1.7.116 Download to test your graphics card memory. Let the memory test run for at least seven passes; the more the better.

Run Hardware - Stress Test With Prime95 to determine any hardware problems. Run all three tests for a few hours each. If you get errors, stop the test and post back here.

Follow the steps for doing CPU stress test using IntelBurnTest

Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).

For Part 3: If You Have Errors: If you swap any memory components, follow these steps for ESD safety:Shut down and turn off your computer.
Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working. If you do not have an anti-static workbench, desk, or pad, you can use your computer tower/case by finding a metal hold in it, such as a drive bay.
... Read more

http://www.sevenforums.com/bsod-help-support/232944-bsod-bccode-124-a.html
Relevancy 47.73%

This is my first post and is actually the first time I couldn't figure out why i'm getting a BSOD. It happens when i'm not looking and sometimes windows fails to boot all together and I suspect these issues are tied together. I'm hoping you guys can help me out

A:BSOD BCCode: a

Hi Bxsteez.

Make it sure that the Corsair Force GS SSD is running with the up-to-date firmware. They does it via their forum ... SSD Firmware Update - The Corsair Support Forums.

Get rid of intel rapid storage. First uninstall it from Control Panel > Programs and Features. Then Uninstall the driver from device manager.
Right click on "my computer" icon and click "manage" on the context menu.
It will open the "computer management" window.
Select "Device Manager" in the left pane, It will list all the existing devices up.
Expand "IDE ATA/ATAPI controllers" by clicking on the triangle in front of it.
Select one Intel device item under it, right click, uninstall.
Continue the process for all Intel items under "IDE ATA/ATAPI controllers"
Now restart the computer. At restart, windows will auto configure the appropriate native system driver.
Free up the startup. Windows does not need any other program to auto start with it, but the auto start programs often conflicts and causes various problems including BSODs.
Click on the Start button
Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the “Startup” tab.
Deselect all items other than the antivirus.
Apply > OK
Accept then restart.
Update Asmedia 106x SATA Controller from Station-Drivers - Asmedia drivers.

Uninstall the following Asrock bloatware junks:
Start Menu\Programs\ASRock Utility
Start Menu\Programs\ASRock Utility\A-Tuning
Start Menu\Programs\ASRock Utility\AsrAppCharger
Start Menu\Programs\ASRock Utility\HDMISwitch
I'd recommend you to Clean Up Factory Bloatware, with a special reference to Point #13





Quote:
13. Consider a Clean Reinstall - Factory OEM Windows 7 which is often better than getting a new computer considering how pre-installed bloatware can corrupt Windows 7 even if it's completely cleaned up.


Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.
If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Let us know the results.
_____________________________________________________________________________________

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {8, 2, 1, fffff800030eb227}

Probably caused by : ntkrnlmp.exe ( nt!KeReleaseSemaphore+137 )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: 0000000000000008, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff800030eb227, ad... Read more

http://www.sevenforums.com/bsod-help-support/311724-bsod-bccode.html
Relevancy 47.73%

I think I've got a persistent BSOD a help BSOD-BCCode for Need problem It occurs about once a month This latest BSOD occured at am PST I had gone to bed leaving the computer running a program called Freemake which is a video transcoder with the option to shut down when the transcoding finished on a file I've tried to zip the dmp file at C Windows Minidump - - dmp however I get the error message reading File not found or no Need help for BSOD-BCCode a read permission I've tried different settings in the properties box to get read permission but I have no idea what it's supposed to be My user account is as the administrator I was able to find the file at C Users Phunbunnies AppData Local Temp WER- - sysdata xml Not knowing what to do with that I began writing this post Then I thought quot Maybe I can zip that file quot so I went back to C Users Phunbunnies AppData Local Temp but CWER- - sysdata xml was no longer there Here's what the error window displays Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode a BCP BCP BCP BCP FFFFF D OS Version Service Pack Product Files that help describe the problem C Windows Minidump - - dmp C Users Phunbunnies AppData Local Temp WER- - sysdata xml These are my system specs Windows -bit Professional SP updated as of Intel i - MSI Z GD- G mobo BIOS V MS- GB G Skill memory F - CL - GBRL Intel GB SSD SSDSA CW G hdd SEAGATE ST AS SATA hdd WESTERN DIGITAL WDC WD FALS- E B SATA hdd WESTERN DIGITAL WD EADS- RGB SATA ATAPI iHES BD-ROM PLDS-DVD RW DRIVE Acer P H monitors into integrated graphics No other video card installed Seasonic X PSU Corsair R case This is the first OS on this homebuilt system I put together from all new parts December excepting the SSD all HDD both PLDS-ROM drives and both monitors OS is from retail upgrade disc and initially installed December Reinstalled from System Image April This is the th or th BSOD in as many months Thank you for your help

A:Need help for BSOD-BCCode a

We've seen a number of BSOD issues with SSD's. Here's the information that I've compiled so far:





Quote:
There's not a whole bunch available to test SSD's. The "easiest" test is to remove the SSD, install a platter-based hard drive, install Windows and test for stability that way.

Here's some suggestions:
- Update the SSD's firmware to the latest available version (VERY IMPORTANT!!!)
- Update the motherboard controllers drivers to the latest available version from the controller manufacturer (NOT the mobo manufacturer unless you can't find any on the controller manufacturer's website)
- Slow the memory (RAM) down to the next slower speed (I've only seen one person who claimed that this worked for them).
- Use any manufacturer's utilities that you may have. If you don't have any, then try this free one (I haven't used it myself): Crystal Dew World
- Update chipset and storage controller drivers to the latest available from the manufacturer of the device (not the manufacturer of the motherboard). Be sure to update ALL controllers on the motherboard!
....NOTE: Recently (Nov 2011) we had BSOD issues with the Marvell 91xx controller and an SSD. You may have to switch controllers also.-
Replace the SSD with a platter based hard drive and see if that stops the BSOD's. If it does, then it's likely that there's a problem with the SSD OR an incompatibility with your system.
It's my opinion that SSD's aren't reliable enough (with current hardware) to be used on a system that needs to work reliably. Until I see reliability I will not recommend, nor will I use, SSD's for critical applications.
06 Dec 2011 - This post tends to confirm issues with certain SSD chipsets and certain controllers - [SOLVED] cant find the cause of BSOD F4 - Tech Support Forum
29 May 2012 - The frequency of BSOD's with SSD's seems to have been decreasing over the last several months. It may be approaching time to re-evaluate my stand on their suitability for use in production systems.


Blue screen blames your video - but there's a lot of storage stuff in the memory dumps.
Update all storage drivers (Intel, Marvell, and USB 3.0)
Update Intel video drivers

Update Realtek audio drivers as they date from 2009

Post back for more suggestions if this doesn't fix your problems.

The following info is just FYI, I've already addressed the issues that I saw in the above paragraphs

- Further info on BSOD error messages available at: http://www.carrona.org/bsodindx.html
- Info on how to troubleshoot BSOD's (DRAFT): http://www.carrona.org/userbsod.html
- How I do it: http://www.carrona.org/howidoit.html

3RD PARTY DRIVERS PRESENT IN THE DUMP FILES
Code:

mv91cons.sys Sun Mar 06 21:20:16 2011 (4D7440E0)
mvs91xx.sys Sun Mar 06 21:13:40 2011 (4D743F54)
mvxxmm.sys Sun Mar 06 21:13:21 2011 (4D743F41)
amdxata.sys Fri Mar 19 12:18:18 2010 (4BA3A3CA)
MpFilter.sys Fri Mar 09 06:05:26 2012 (4F59E3F6)
TurboB.sys Mon Nov 29 18:02:31 2010 (4CF43107)
lvuvc64.sys Wed Jan 18 01:41:08 2012 (4F166984)
lvrs64.sys Wed Jan 18 01:40:36 2012 (4F166964)
Rt64win7.sys Fri Jun 10 02:33:15 2011 (4DF1BAAB)
nusb3xhc.sys Thu Feb 10 00:52:33 2011 (4D537D21)
GEARAspiWDM.sys Mon May 18 08:17:04 2009 (4A1151C0)
nusb3hub.sys Thu Feb 10 00:52:32 2011 (4D537D20)
RTKVHD64.sys Tue Mar 06 05:42:38 2012 (4F55EA1E)
MBfilt64.sys Thu Jul 30 23:40:32 2009 (4A7267B0)
IntcDAud.sys Fri Oct 15 04:28:17 2010 (4CB810A1)
rikvm_38F51D56.sys Fri Oct 29 06:52:09 2010 (4CCAA759)
mbam.sys Tue Mar 20 12:04:48 2012 (4F68AAA0)
igdkmd64.sys Mon Mar 19 19:31:54 2012 (4F67C1EA)
HECIx64.sys Tue Oct 19 19:33:43 2010 (4CBE2AD7)

http://www.carrona.org/drivers/driver.php?id=mv91cons.sys
http://www.carrona.org/drivers/driver.php?id=mvs91xx.sys
http://www.carrona.org/drivers/driver.php?id=mvxxmm.sys
http://www.carrona.org/drivers/driver.php?id=amdxata.sys
http:/... Read more

http://www.sevenforums.com/bsod-help-support/233375-need-help-bsod-bccode.html
Relevancy 47.73%

Help!

I've been getting BSOD on my laptop lately. Usually triggered when I (sometimes in combination):
-connect laptop to external lcd monitor
-pull the battery out and just power with the ac adapter<--this occurs most often
-listen to itunes (what the...)
-open Google Chrome for extended periods of time (ie. 3/4hrs).

I have a Dell Vostro 1510. Service Pack 2 Vista Basic 32bit. Nothing fancy. 3 gig memory, integrated graphics.

Here are the details.




Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.0.6002.2.2.0.768.2
Locale ID: 1033
Additional information about the problem:
BCCode: a
BCP1: 00000054
BCP2: 0000001B
BCP3: 00000001
BCP4: 81E1CFE9
OS Version: 6_0_6002
Service Pack: 2_0
Product: 768_1
Files that help describe the problem:
C:\Windows\Minidump\Mini080410-02.dmp
C:\Users\George\AppData\Local\Temp\WER-59420-0.sysdata.xml
C:\Users\George\AppData\Local\Temp\WER710A.tmp.version.txt

A:BSOD -BCCode: a

Hi LaptopPhail,

Welcome to Vistax64!

Please attachment the memory dump file with your reply and I will check how the problem started.
This guide should explain how to attach the memory dump file:

How to Upload DMP Files to Vista Forums for Analysis

Thanks,

DeanP

http://www.vistax64.com/crashes-debugging/281726-bsod-bccode.html
Relevancy 47.73%

I have a problem appears from time to time I get the blue screen windows dumps some memory into a file BCCode:7a BSOD f4 and and I get the following error report after it restarts BSOD BCCode:7a and f4 I use Sony BSOD BCCode:7a and f4 Vaio Laptop MODEL VGN-CR GH Windows Starter bit and GB RAM Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode a BCP C BCP C E BCP EF BCP AE AF OS Version Service Pack Product Files that help describe the problem C Windows Minidump - - dmp C Users User AppData Local Temp WER- - sysdata xml Read our privacy statement online Windows Privacy Statement - Microsoft Windows If the online privacy statement is not available please read our privacy statement offline C Windows system en-US erofflps txt and sometimes appears error with this code Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode f BCP BCP BCB BCP BCB BCP A D OS Version Service Pack Product Files that help describe the problem C Windows Minidump - - dmp C Users User AppData Local Temp WER- - sysdata xml Read our privacy statement online Windows Privacy Statement - Microsoft Windows If the online privacy statement is not available please read our privacy statement offline C Windows system en-US erofflps txt Code I use Sony Vaio Laptop MODEL VGN-CR GH Windows Starter bit and GB RAM Attachment Attachment

A:BSOD BCCode:7a and f4

Please follow these instructions
http://www.sevenforums.com/crashes-d...tructions.html

http://www.sevenforums.com/bsod-help-support/190562-bsod-bccode-7a-f4.html
Relevancy 47.73%

I'm having trouble with my computer with this BSOD memory dump. I get this BSOD very often sometimes it does it every 30minutes sometimes 2-3hours. I'm not very good with computers and I would really appreciate if someone will help me step by step to fixing this problem. This computer is fairly new and my friend built it.

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.0.6001.2.1.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 109
BCP1: A3A039D897D8E502
BCP2: B3B7465EEA5698F6
BCP3: FFFFFA6000D97730
BCP4: 0000000000000001
OS Version: 6_0_6001
Service Pack: 1_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\Mini062409-01.dmp
C:\Users\Dimmy\AppData\Local\Temp\WER-37861-0.sysdata.xml
C:\Users\Dimmy\AppData\Local\Temp\WERAD00.tmp.version.txt
 

A:BSOD help please. BCCode: 109

Hi there,

Could you please attach your latest minidump files so that someone can debug them and get a better idea of what is causing the error. They should be located at

Start > My Computer > Local Disk C: > Windows > Minidump

Attach 3-5 dumps in your next post (you can zip them if needed)
 

http://www.techspot.com/community/topics/bsod-help-please-bccode-109.129884/
Relevancy 47.73%

I was just playing Rift and I got help BSOD with Need 1e? BCCode a BSOD When I got back into Windows this is what the message said Code BCCode e BCP FFFFFFFFC BCP FFFFF EC BCP BCP Dump file and perfmon report are attached System specs Win Pro x i k GB x GB GSkill DDR - - - - v Nvidia GTX Asus P P Pro GB Intel X M G boot drive w Need help with BSOD BCCode 1e? windows GB OCZ Vertex GB WD Blue Corsair w I'm using newest drivers for everything except my video card because there is a specific bug with the newest drivers and a game that I play So I'm using the Nvidia drivers I have had issues lately with some file corruption and I'm thinking that there is a problem with either Intel's and or RST drivers or one of my SSDs But when I run checkdisk it reports no errors sfc scannow reports no errors and Intel's SSD toolbox diagnostic reports no errors I have had this PC since January and have had no issues until the last week or so Windows memory diagnostic and memtest also came up clean I've done everything I know how to try to figure this out but I don't know how to check a mini dump file and I'm hoping that will give me a clue as to where the problem is These forums are great and I often use them as a resource to help others fix their PC problems so thank you in advance for help

A:Need help with BSOD BCCode 1e?

Attachment didn't work, sorry.

http://www.sevenforums.com/bsod-help-support/172685-need-help-bsod-bccode-1e.html
Relevancy 47.73%

I used to have Windows 8 and was getting BSODs and crashes for a couple of weeks. I formatted my hard drive and reverted to Windows 7 on 3/1/13. I have been having random BSODs since 3/3/14 on Windows 7. The screen has recently started flickering as well in the past week or so. I originally thought it was my old graphics card (ATI RADEON HD 5750), but I bought a new graphics card yesterday (RADEON R5 230 Core Edition) and that did not solve the issue.

I am currently running Driver Verifier (for the past 3-4 hours) and have ran a memory diagnostic. It has BSOD'd once since Verifier has been enabled, but it did not show a log.

A:BSOD, BCCode 109

Hello Andy, and welcome to Seven Forums.

Please read the instructions here: Blue Screen of Death (BSOD) Posting Instructions, and post back with the needed information. One of our BSOD experts should be by later when able to further help.

http://www.sevenforums.com/bsod-help-support/333309-bsod-bccode-109-a.html
Relevancy 47.73%

Hi during a starcraft 2 cinematic my pc locked up, screen went pixilated and now it won't boot up in normal mode, only safe mode. Any help would be appreciated in helping me pinpoint this problem.





Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: 116
BCP1: 8AE2E008
BCP2: 969358A4
BCP3: 00000000
BCP4: 00000002
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\031913-19624-01.dmp
C:\Users\Patrick\AppData\Local\Temp\WER-53289-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

A:BSOD BCCode 116

Hello,

Post the make/model of the PC. If custom built post the specs.

Boot into Safe Mode and uninstall the graphics driver then restart the PC.

Once the PC boots install the required graphics driver.

http://www.techsupportforum.com/forums/f299/bsod-bccode-116-a-690278.html
Relevancy 47.73%

Hi all, wondering if someone can help me. My computer has not been wanting to boot up a lot lately. I've recently had to replace the hard drive in it. Although it didn't seem to fix the entire issue. Anyways, when it finally does boot here is what I get in the "Windows has recovered from an unexpected shutdown" box.

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: a
BCP1: 0000000000000000
BCP2: 0000000000000002
BCP3: 0000000000000000
BCP4: FFFFF80002EE8F74
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\122212-20654-01.dmp
C:\Users\Wilson\AppData\Local\Temp\WER-44553-0.sysdata.xml

Please note, I'm not a computer genius lol and I need things explained to me step by step in idiot terms Thanks in advance!

A:BSOD BCCode: a

Follow this

http://www.sevenforums.com/crashes-d...tructions.html

http://www.sevenforums.com/bsod-help-support/270247-bsod-bccode.html
Relevancy 47.73%

Greetings I ve recently built a new gaming PC and I got the ram cpu and motherboard in a bundle from overclockers Everything seemed fine BCCode: BSOD 7a at first but after a few hours I started getting a BSOD seemingly at random I can be playing a game for hours before it happens or it will happen whilst I m browsing This is the event log Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode a BCP FFFFF FC D E BCP FFFFFFFFC E BCP AC BCP FFFFF C AFC C OS Version Service Pack Product The minidumps are in the attachment Any help would be greatly appreciated SysInfo Tech Support Guy System Info Utility version OS Version Microsoft Windows Ultimate Service Pack bit Processor Intel R Core TM i - K CPU GHz Intel BSOD BCCode: 7a Family Model Stepping Processor Count RAM Mb Graphics Card NVIDIA GeForce GTX Mb Hard Drives C Total - MB Free - BSOD BCCode: 7a MB Motherboard BSOD BCCode: 7a Gigabyte Technology Co Ltd Z -D HP-CF Antivirus Norton Internet Security Updated and Enabled nbsp

A:BSOD BCCode: 7a

Your first log shows BCCode "7A" and mentions "There was error with disk hardware" and "Typically caused by
a bad block in the paging file or disk controller error". The second log shows BCCode "A" and mentions unable to read from a particular memory address. It mentions a driver file as being the probable cause, though from my experience, it isn't really a bad driver.

Since these two errors are not the same and this is a new machine, I would start by testing your RAM using Memtest86: http://www.memtest86.com/
 

https://forums.techguy.org/threads/bsod-bccode-7a.1104345/
Relevancy 47.73%

Tech Support Guy System Info Utility version OS Version Microsoft Windows Ultimate bit Processor AMD Phenom tm BCCode BSOD 124 II X Processor AMD Family Model Stepping Processor Count RAM Mb Graphics Card ATI Radeon HD Series Mb Hard Drives C Total - MB Free - MB E Total - MB Free - MB Motherboard ASUSTeK Computer INC M A XTD EVO Rev X X MT K Antivirus Trend Micro Titanium Maximum Security Updated Yes On-Demand Scanner Enabled ------------------------------------------------------------------------ Computer crashes while playing games Seemingly random times Had this issue for quite some time called Sapphire and received an updated BIOS for the card Had this issue before crossfireX with runs great by itself Flashed BIOS to card Problem BSOD BCCode 124 happens less frequent and after the reboot windows specifies BSOD Used to just say quot Windows shut down unexpectedly quot Happens in Crysis much quicker then while playing Borderlands Happened once or twice playing Modern Warfare yet not MW All games played with highest graphical options Cant see which BSOD type it is since the games i play are full screen and I only hear the infamous BSOD sound while staring at a frozen game Overheating is not the issue Cards run at C load C idle Memtest came out fine I attatched the dmp specified ------------------------------------------------------------------------ Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode BCP BCP FFFFFA F BCP BCP OS Version Service Pack Product Files that help describe the problem C BSOD BCCode 124 Windows Minidump - - dmp nbsp

https://forums.techguy.org/threads/bsod-bccode-124.1016573/
Relevancy 47.73%

Hello,
First I'm sorry if i post a thread incorrectly, my bad.
Anyway I have really big problems with my PC. It's really unstable. I'm keep getting the BSOD.
Heres information about it:

Problemos para?as:
Problemos įvykio pavadinimas: BlueScreen
OS versija: 6.1.7600.2.0.0.256.1
Vietos lokalė: 1063

Papildoma informacija apie problemą:
BCCode: 1e
BCP1: FFFFFFFFC000001D
BCP2: FFFFF80002EB9BE2
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Failai, kurie padeda apibūdinti problemą:
C:\Windows\Minidump\060313-27518-01.dmp
C:\Users\user\AppData\Local\Temp\WER-72244-0.sysdata.xml

Skaitykite mūsų privatumo patvirtinimą internete:
http://go.microsoft.com/fwlink/?link...8&clcid=0x0427

Jei privatumo patvirtinimas tinkle neprieinamas, skaitykite mūsų privatumo patvirtinimą neprisijungę:
C:\Windows\system32\lt-LT\erofflps.txt

Hope this helps.

Also I had BSOD with BCCode:4a
I believe its something with drivers since my sound card stopped working 5 mins ago. Please help.


Your Sincerely, Matas.

A:BSOD BCCode: 1e

Incomplete reports, please grab all and post the output following: Blue Screen of Death (BSOD) Posting Instructions

http://www.sevenforums.com/bsod-help-support/292406-bsod-bccode-1e.html
Relevancy 47.73%

i have the BOSD crashing my windows every like 4 minuets!!!

i suspect 2 things 1-McAfee OAS and 2-uTorrent

i have uninstalled uTorrent and disabled McAfee and seems to work nice

please check my Minidump and tell me what is causing that problem.

thank's in advance
 

A:BSOD on Win 7 (BCCode: d1) !

The minidumps point to a driver NETIO.sys, but I would uninstall McAfee and install Microsoft Security Essentials from here:
http://windows.microsoft.com/en-US/windows/products/security-essentials
 

http://www.techspot.com/community/topics/bsod-on-win-7-bccode-d1.176777/
Relevancy 47.73%

So I just built my first computer a couple weeks ago and everything seemed to be running fine I always keep my computer on it's either in sleep hibernate and never shut down After finally shutting it down and turning it back on alot of my programs didn't seem to start or had to reinstall for some odd reason When starting up Firefox it constantly gives me the quot report crash quot window When starting up programs such as iTunes or Steam it asks me to reinstall I then randomly get a BSOD Problem Event Name BlueScreen OS Version Locale ID BCCode BCP BCP FFFFFA D F BCP BCP OSVersion ServicePack Product Files that help describe the problem C Windows Minidump dmp C Users Jeff AppData Local Temp WER- - sysdata xml BSOD BCCode 124 I updated drivers for my video card and was able to play some BSOD BCCode 124 graphically-intensive games so there didn't seem to be an issue with my ATI Radeon I also ran MDSCHED and there were no reported errors for memory so hopefully that isn't the problem either Cooling isn't an issue either No overclocking I'm suspecting the ATI drivers may have caused the BSOD's but I'm really unsure to be honest If it is a hardware issue I would like to BSOD BCCode 124 find out as soon as possible so I can RMA the item back to Newegg if something really is faulty Please point me in the right direction Minidumps are attached below Much thanks

A:BSOD BCCode 124

  
Quote: Originally Posted by coban


So I just built my first computer a couple weeks ago and everything seemed to be running fine. I always keep my computer on; it's either in sleep/hibernate and never shut down. After finally shutting it down and turning it back on, alot of my programs didn't seem to start or had to reinstall for some odd reason. When starting up Firefox, it constantly gives me the "report crash" window. When starting up programs such as iTunes or Steam, it asks me to reinstall. I then randomly get a BSOD.

Problem Event Name BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 1033

BCCode: 124
BCP1: 0000000000000000
BCP2: FFFFFA800627D8F8
BCP3: 0000000000000000
BCP4: 0000000000000000

OSVersion 6_1_7600
ServicePack 0_0
Product 768_1

Files that help describe the problem:
C:\Windows\Minidump\010710_27050_01.dmp
C:\Users\Jeff\AppData\Local\Temp\WER-41558-0.sysdata.xml

I updated drivers for my video card and was able to play some graphically-intensive games, so there didn't seem to be an issue with my ATI Radeon 5850. I also ran MDSCHED and there were no reported errors for memory, so hopefully that isn't the problem either. Cooling isn't an issue either. No overclocking.

I'm suspecting the ATI drivers may have caused the BSOD's but I'm really unsure to be honest. If it is a hardware issue, I would like to find out as soon as possible so I can RMA the item back to Newegg if something really is faulty. Please point me in the right direction. Minidumps are attached below.

Much thanks.


Hi and welcome

It is hardware. use these to identify and fix. http://www.sevenforums.com/crash-loc...-what-try.html


Code:
011610-17659-01.dmp 1/16/2010 4:57:38 PM 0x00000124 00000000`00000000 fffffa80`06bd07a8 00000000`00000000 00000000`00000000 ntoskrnl.exe ntoskrnl.exe+4a63cc x64 C:\Users\K\Desktop\New folder\011610-17659-01.dmp 4 15 7600
011610-18704-01.dmp 1/16/2010 5:22:04 PM 0x00000124 00000000`00000000 fffffa80`06ba8038 00000000`00000000 00000000`00000000 ntoskrnl.exe ntoskrnl.exe+4a63cc x64 C:\Users\K\Desktop\New folder\011610-18704-01.dmp 4 15 7600
011610-22120-01.dmp 1/16/2010 4:25:54 PM 0x00000124 00000000`00000000 fffffa80`06d448f8 00000000`00000000 00000000`00000000 ntoskrnl.exe ntoskrnl.exe+4a63cc x64 C:\Users\K\Desktop\New folder\011610-22120-01.dmp 4 15 7600


Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\K\Desktop\New folder\011610-18704-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*d:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0xfffff800`02a65000 PsLoadedModuleList = 0xfffff800`02ca2e50
Debug session time: Sat Jan 16 20:21:58.312 2010 (GMT-5)
System Uptime: 0 days 0:00:11.608
Loading Kernel Symbols
...................................................
Loading User Symbols
Mini Kernel Dump does not contain unloaded driver list
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 124, {0, fffffa8006ba8038, 0, 0}

Probably caused by : hardware

F... Read more

http://www.sevenforums.com/bsod-help-support/56347-bsod-bccode-124-a.html
Relevancy 47.73%

I think I've got a persistent BSOD problem It occurs about once a month I've posted for BSOD help here before but it's been awhile so forgive me for not having the attachments ready This latest BSOD occured at am PST I had gone to bed leaving the computer running a program called Freemake which is a help for BSOD-BCCode Need a video transcoder with the option to shut down when the transcoding finished on a file I've tried to zip the dmp file at C Windows Need help for BSOD-BCCode a Minidump - - dmp however I get the error message reading File not found or no read permission I've tried different settings in the properties box to get read permission but I have no idea what it's supposed to be I was able to find the file at C Users Phunbunnies AppData Local Temp WER- - sysdata xml Not knowing what to do with that I began writing this post Then I thought quot Maybe I can zip that file quot so I went back to C Users Phunbunnies AppData Local Temp butCWER- - sysdata xml was no longer there Here's what the error window displays Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode a BCP BCP BCP BCP FFFFF D OS Version Service Pack Product Files that help describe the problem C Windows Minidump - - dmp C Users Phunbunnies AppData Local Temp WER- - sysdata xml These are my system specs Windows -bit Professional SP updated as of Intel i - MSI Z GD- G mobo BIOS V MS- GB G Skill memory F - CL - GBRL Intel GB SSD SSDSA CW G hdd SEAGATE ST AS SATA hdd WESTERN DIGITAL WDC WD FALS- E B SATA hdd WESTERN DIGITAL WD EADS- RGB SATA ATAPI iHES BD-ROM PLDS-DVD RW DRIVE Acer P H monitors into integrated graphics No other video card installed Seasonic X PSU Corsair R case This is the first OS on this homebuilt system I put together from all new parts December excepting the SSD all HDD both PLDS-ROM drives and both monitors OS is from retail upgrade disc and initially installed December Reinstalled from System Image April This is the th or th BSOD in as many months Thank you for your help

A:Need help for BSOD-BCCode a

http://www.techsupportforum.com/foru...ta-452654.html

Follow that article and post the files here
even if it does not have mini dumps it will give us more info about your system

As for the SSD - When was the last time you updated the firmware ..check the updates on intel's site for your model SSD and update the firmware if available

http://www.techsupportforum.com/forums/f299/need-help-for-bsod-bccode-a-648891.html