Windows Support Forum

BSOD when in FireFox - bugcheck 0x00000124

Q: BSOD when in FireFox - bugcheck 0x00000124

Hello I've done a fair amount of 0x00000124 FireFox - in BSOD bugcheck when research into this BSOD x and I've found lots of possible causes of course And I've satisfied most things on the quot Windows Stop x - what it means and what to try quot post so I need your kind help I recently wiped my BSOD when in FireFox - bugcheck 0x00000124 very stable Win Ultimate -bit system and installed Win Ultimate -bit in order to upgrade my memory to GB The system is a Dell XPS with q GeForce GTX GB upgraded watt power supply all running at stock speeds -- nothing overclocked To upgrade to GB I purchased used RAM via ebay so right away I suspect bad RAM but I let Windows Memory Diagnostic run in extended mode for a BSOD when in FireFox - bugcheck 0x00000124 over a day after the first crash then later a couple days straight with no errors It crashed again last night while in FireFox so tonight I vacuumed out what little dust there was in the system and cleaned the Arctic Silver compound off the CPU and heatsink and reapplied fresh compound After booting up and running for less than minutes I got the BSOD again So next I downloaded the debugger and set up the MS symbol server path and ran the dump but just received this BugCheck fffffa a b ERROR Module load completed but symbols could not be loaded for intelppm sys Probably caused by GenuineIntel So next I downloaded and ran SF Diagnostic Tool and I'm attaching the results If anyone can make any sense of this I would be so thankful Also fwiw I have an almost identical XPS at work GTX Ti instead of GTX but it's had GB and Win Pro -bit from day one going on years now and I've never seen this crash I can't remember the last time I've seen a BSOD on it And I've confirmed that all the drivers for things like sound card storage controller network adapters etc are all exactly the same -- all stock vanilla drivers included with Windows Thank you so much

Relevancy 100%
Preferred Solution: BSOD when in FireFox - bugcheck 0x00000124

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: BSOD when in FireFox - bugcheck 0x00000124

Hello, please follow the tutorial linked be below and post the results .
Windows Genuine and Activation Issue Posting Instructions

http://www.sevenforums.com/bsod-help-support/303591-bsod-when-firefox-bugcheck-0x00000124.html
Relevancy 83.85%

Hi i have a new pc and receive a bsod every time its under load when playing a game ( particularly when playing battlefield bad company) I have removed 1 stick of memory at a time ( no diff) changed power supplies ( no diff) added new cpu cooler ( no diff ) ---PLEASE Help !!!
system details below
? OS - Windows 7
? x86 x64
? Win 7 Ultimate - Clean install
? retail
? Age of system - 2 month
? Age of OS installation - have you re-installed the OS? - 2 months - no reinstall

? CPUi5 2500 sandy bridge
? Video Card Sapphire radeon hd 8650
? MotherBoard gigabyte GA-p67A-UD3R-B3
? Power Supply - brand & wattage- cooler master RS-500-PCAR-J3 - 500watt

? System Manufacturer - whitebox

A:[SOLVED] BSOD bugcheck was: 0x00000124

Bugcheck 0x124 = WHEA = Machine Check Exception = Hardware failure

Info on 0x124 - http://www.sevenforums.com/crash-loc...-what-try.html

Regards. . .

jcgriff2

`

http://www.techsupportforum.com/forums/f299/solved-bsod-bugcheck-was-0x00000124-564753.html
Relevancy 82.56%

Second time I have had this BSOD in the last two days. I had been having skipping sound problems and had tried reinstalling sound drivers (same version) and video drivers (updated version). When those did not work I tried removing Speedfan (v 4.47) and that did work, reverting back to Speedfan version 4.45 and that is when the BSOD started when playing the game. My first thought was my video card was getting hot because the older version does not raise the fan RPM when the card gets hot. I raised the RPMs manually and tried playing again. It BSODed again. I am not sure why, I am including the zipped file from the diagnostic tool. Thanks for the help in advance.

A:BSOD playing FarCry2 bugcheck was 0x00000124

Hello radman3d.

Can you update ASUS Xonar DG Audio Device driver? If is old and goes back to March 2011. The site where you may search for the possible updates are ASUSTeK Computer Inc. -Support- Drivers and Download or ASUSTeK Computer Inc. -Support- Drivers and Download Xonar DG
Probably the problem started after installing the audio card?

Uninstall all Roxio products.

Code:
\SystemRoot\SysWow64\Drivers\Cdr4_2K.SYS has been blocked from loading due to incompatibility with this system. Please contact your software vendor for a compatible version of the driver.
\SystemRoot\SysWow64\Drivers\Cdralw2k.SYS has been blocked from loading due to incompatibility with this system. Please contact your software vendor for a compatible version of the driver.
The version of Roxio in use in incompatible with your system.

Uninstall AVG using AVG Remover. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.
Download, install and update those, and then run full system scans with both of them, one by one.

Probably you may want to uninstall this one , too.

Code:
Start Menu\Programs\Emsisoft Anti-Malware
You have the best one already installed, MBAM.

Let us know the results.

http://www.sevenforums.com/bsod-help-support/280465-bsod-playing-farcry2-bugcheck-0x00000124.html
Relevancy 82.56%

Hi Guys,

I'm having this bugcheck for quite awhile now, hoping you could help.
Attaching the zipped file as requested.

Thanks,
Chris

A:BSOD bugcheck: 0x00000124, Computer was idle

Genuine Intel 0x124:
Stop 0x124 - what it means and what to try

This problem is most likely hardware caused.

(Also please do the following to update your system specs on seven forums. This may come in handy, to possibly me and others) = System info update : System Info - See Your System Specs
System specs page: http://www.sevenforums.com/profile.php?do=extra

http://www.sevenforums.com/bsod-help-support/251405-bsod-bugcheck-0x00000124-computer-idle.html
Relevancy 81.7%

Been getting infrequent BSOD errors on my Windows 10 PC (Home edition).

I had a look on BlueScreenView, seems like a lot of the bugcheck BSOD is ntoskrnl related but I can't work out if it's hardware related or some bad driver somewhere.
The computer is 9 months old, custom built gaming PC.Temperatures are low <60C at load, <30C at idle (waterblock cooling on CPU)System is stable when gaming, a lot of the BSOD is happening at idle. (I leave my PC running all the time)The OS was upgraded from Windows 8.1 to Windows 10 in late 2015.System felt more stable under Windows 8.1, not really experienced many BSOD under Win8.1I have tested the memory with 10 successful passes (12 hrs).Have run DirectX diagnostics and cyclic Heaven/Valley benchmarks - no crash.

A:Random BSOD (Windows 10) ntoskrnl/0x00000124 bugcheck

Sorry, zip file attached with the diagnostics from DM Log Collector

UNSC-CORTANA-Thu_04_28_2016_180201_69.zip

http://www.tenforums.com/bsod-crashes-debugging/48609-random-bsod-windows-10-ntoskrnl-0x00000124-bugcheck.html
Relevancy 80.84%

My computer crashed every time I run experiment(NI equipment connects to the computer). My experiment needs to run two or three days, but every twelve hours it got crash(shut down automatically). The max work hour I got is 15 hours.

When I reboot the computer, I got the following information:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.4
Locale ID: 1033

Additional information about the problem:
BCCode: 124
BCP1: 0000000000000000
BCP2: FFFFFA800FAD58F8
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\020914-89029-01.dmp
C:\Users\BIT Lab\AppData\Local\Temp\WER-145174-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

My computer information:

Attachment 305907

and the SF files.
Attachment 305906

Anyone can give a clue? how to fix this?

A:BSOD bugcheck code 0x00000124 Caused By Driver ntoskrnl.exe

Welcome
BC 124 is not a driver or any other software. It is a hardware problem. You may want to start by checking your memory and hard drive for starters.
Stop 0x124 - what it means and what to try

http://www.sevenforums.com/bsod-help-support/321706-bsod-bugcheck-code-0x00000124-caused-driver-ntoskrnl-exe.html
Relevancy 80.84%

Just now my computer just randomly got the BSOD. Its a pavilion dv7-2165dx. running Windows 7 home edition. Service Pack 1 64-bit OS .
below are my attached files.

A:Random BSOD watching a video, The bugcheck code: 0x00000124

Hi Bigbelly

Lets test your RAM



   Note
You will need a USB Flash Drive
RAM - Test with Memtest86+

http://www.sevenforums.com/bsod-help-support/280641-random-bsod-watching-video-bugcheck-code-0x00000124.html
Relevancy 68.37%

Hi Guys,
So my computer has been randomly freezing, the mouse & keyboard will still turn the monitor back on but the image is just frozen. I keep getting this error.
The computer has rebooted from a bugcheck. The bugcheck was: 0x00000124 (0x0000000000000000, 0xfffffa8005804038, 0x0000000000000000, 0x0000000000000000). A dump was saved in: C:\Windows\Minidump\011811-67142-01.dmp. Report Id: 011811-67142-01.

Ive uploaded the error reports and minidump files from a few if they help.
Public - Windows Live
Ive googled the problem but haven't found any solutions and my BIOS and drivers are all updated and my disks aren't corrupted.
Any help?

A:Computer Freezing. Bugcheck reboot 0x00000124

  
Quote: Originally Posted by logpace


Hi Guys,
So my computer has been randomly freezing, the mouse & keyboard will still turn the monitor back on but the image is just frozen. I keep getting this error.
The computer has rebooted from a bugcheck. The bugcheck was: 0x00000124 (0x0000000000000000, 0xfffffa8005804038, 0x0000000000000000, 0x0000000000000000). A dump was saved in: C:\Windows\Minidump\011811-67142-01.dmp. Report Id: 011811-67142-01.

Ive uploaded the error reports and minidump files from a few if they help.
Public - Windows Live
Ive googled the problem but haven't found any solutions and my BIOS and drivers are all updated and my disks aren't corrupted.
Any help?


Unfortunately, 0x124 is the most vague BSOD that Windows can offer you.

I had the same problem last night and if you want, take a look at my thread. http://www.sevenforums.com/crashes-d...rclocking.html

Also take a look at this thread: Stop 0x124 - what it means and what to try

http://www.sevenforums.com/bsod-help-support/139042-computer-freezing-bugcheck-reboot-0x00000124.html
Relevancy 67.51%

Have been getting blue screens about 4-6 times a year on average.
The latest one didn't show up in my program of BSOD errors so i hope the error number is correct in the thread title which you can see (hopefully) in the zip file.
Not a major issue for me personally. But I am curious what causes it. And why it doesn't happen all the time, only on random occasions.
Thanks

note
I also noted it happening once or twice during a game of Dota 2 as well.

http://www.sevenforums.com/bsod-help-support/401857-bsod-dota-2-background-firefox-error-0x00000124.html
Relevancy 64.93%

We've been getting a BSOD on one of our computers on startup recently The exact message the BSOD gives varies but often mentions atapi sys Having done extensive research we've come BSOD on Bugcheck: Unknown start, 3d Bugcheck Repair: Startup to the conclusion that it could be a rootkit or it could be the fact that we have Daemon Tools installed on the computer The problem is when the BSODs first started entirely at random - we'd done no updates and changed nothing except perhaps to install a game or two not sure repeatedly trying to start the computer would eventually make it start after or attempts and it would be fine after that but they've gotten worse and no matter how many times we tried we've been unable to make it start safe-mode or otherwise If only we could get the thing to start up we could run heaps of rootkit scans We'd really rather not do a format and full reinstall so we're looking for solutions that can be done by hand So far we've tried renaming atapi sys and copying a fresh hopefully clean version from a different computer via Recovery Environment's cmd prompt but the BSOD on start, Startup Repair: Unknown Bugcheck: Bugcheck 3d BSODs still occur We've tried Startup Repair but it gives this message Code Root cause found Unknown Bugcheck Bugcheck d Parameters xfffff ffb x x xfffff e b Repair action System files integrity check and repair Result Failed Error code x We have no USB keys plugged in when doing the Startup Repair Specs Windows Home Premium x Intel Core Quad can't remember the exact model gb Ram GTX MSI MS- Motherboard We're dual-booting two harddrives One has Windows XP on it the other Windows The XP harddrive boots fine but the drive BSODs every time We cannot boot into Windows safe-mode or otherwise Any help would be much appreciated

A:BSOD on start, Startup Repair: Unknown Bugcheck: Bugcheck 3d

Additional information is required.

1. Download this .BAT file to your desktop

2. Right-click the .BAT file and then click 'Run as Administrator'
3. Locate the .ZIP file created on your desktop, and upload it here in your next reply.

http://www.sevenforums.com/bsod-help-support/320562-bsod-start-startup-repair-unknown-bugcheck-bugcheck-3d.html
Relevancy 53.32%

Hi

I just got out from a faulty GPU nightmare one week ago.

Now I recently got this BSOD while browsing on firefox and I would like to know I i should worry or if there's anyway to keep it from happening again.

A:DSOD browsing firefox, Bugcheck 0x0000000a (WinDbg analysis available)

Please follow the Blue Screen of Death (BSOD) Posting Instructions so we can get the right files needed to help you.

-Justin

http://www.sevenforums.com/bsod-help-support/348636-dsod-browsing-firefox-bugcheck-0x0000000a-windbg-analysis-available.html
Relevancy 52.46%

Hello I'm getting random BSOD's on my HP DV - eo Laptop At most times there is no quot real quot bluescreen appearing Instead the computer just freeze and then go black and I've to shut it down manually But sometimes there is a real bluescreen appearing and it says quot an attempt to reset the display driver and 2090eo 0x116 Bugcheck random x64 BSOD BSOD's DV6 Win7 recover from a timeout failed BSOD Bugcheck 0x116 Win7 x64 DV6 2090eo random BSOD's quot and some other times the quot Video TDR error quot message has appeared I've learned that this is a bugcheck x quot BSOD and I've read about solutions such as updating BSOD Bugcheck 0x116 Win7 x64 DV6 2090eo random BSOD's Video Driver check the temperature updating other drivers and so on I've tried several video drivers updated other outdated drivers and nothing works I don't think its a heatrelated problem as I sometimes get BSOD about min after start up Actually I have had freezes like this in periods from about six months after I bought the computer until now bought BSOD Bugcheck 0x116 Win7 x64 DV6 2090eo random BSOD's it at the end of nov The first time I solved it by updating BIOS but know I can't find any new update Other quot BSOD periods quot I've solved by updating video driver and reseting windows to the original quot store-mode quot so to say P Now any solution I can come up with doesn't work and I don't wanna reinstall windows again just for another two months of being BSOD free Anyone got any tips I really need some help Minidumpfile attached

A:BSOD Bugcheck 0x116 Win7 x64 DV6 2090eo random BSOD's

  
Quote: Originally Posted by MrRevolver


Hello!

I'm getting random BSOD's on my HP DV6-2090eo Laptop. At most times there is no "real" bluescreen appearing. Instead the computer just freeze and then go black, and I've to shut it down manually. But sometimes there is a real bluescreen appearing and it says "an attempt to reset the display driver and recover from a timeout failed" and some other times the "Video TDR error" message has appeared. I've learned that this is a bugcheck 0x116" BSOD and I've read about solutions such as updating Video Driver, check the temperature, updating other drivers and so on. I've tried several video drivers, updated other outdated drivers and nothing works. I don't think its a heatrelated problem as I sometimes get BSOD about 1 min after start up.
Actually I have had freezes like this in periods from about six months after I bought the computer until now(bought it at the end of nov 2009). The first time I solved it by updating BIOS, but know I can't find any new update.
Other "BSOD periods" I've solved by updating video driver and reseting windows to the original "store-mode" so to say :P

Now any solution I can come up with doesn't work and I don't wanna reinstall windows again just for another two months of being BSOD free!

Anyone got any tips, I really need some help!

Minidumpfile attached.


Its the directx driver, video card, power, or heat. I would start by re-installing directX

"It's not a true crash, in the sense that the bluescreen was initiated only because the combination of video driver and video hardware was being unresponsive, and not because of any synchronous processing exception.

Since Vista, the "Timeout Detection and Recovery" (TDR) components of the OS video subsystem have been capable of doing some truly impressive things to try to recover from issues which would have caused earlier OSs like XP to crash.

As a last resort, the TDR subsystem sends the video driver a "please restart yourself now!" command and waits a few seconds.

If there's no response, the OS concludes that the video driver/hardware combo has truly collapsed in a heap, and it fires off that stop 0x116 BSOD.

If playing with video driver versions hasn't helped, make sure the box is not overheating.

Try removing a side panel and aiming a big mains fan straight at the motherboard and GPU.

Run it like that for a few hours or days - long enough to ascertain whether cooler temperatures make a difference.

If so, it might be as simple as dust buildup and subsequently inadequate cooling.

I would download cpu-z and gpu-z (both free) and keep an eye on the video temps Let us know if you need help STOP 0x116: VIDEO_TDR_ERROR troubleshooting

http://www.sevenforums.com/bsod-help-support/177729-bsod-bugcheck-0x116-win7-x64-dv6-2090eo-random-bsods.html
Relevancy 52.03%

T GB Kingston T specific Ram GHz CTO T is - Bugcheck Unknown OFF Bugcheck System Shutting : c00002e3 randomly Chipset Fresh Full licensed Unknown Bugcheck : Bugcheck c00002e3 - System is randomly Shutting OFF copy of Win Ultimate loaded onto system without issues All device drivers from the Lenovo site have been loaded successfully without incident Device Manager showing Zero issues System randomly will just simply shut down NO BSOD just shut off Only diagnostic that I can get the system to repeat this behavior is the Lenovo Thinkvantage Toolbox diagnostic program System will shut down during either the multicore processor test or the advanced memory pattern test Parameters of bugcheck x ce ab xc x x Problem signature Problem Event Name BlueScreen OS Version Locale ID Files that help describe the problem - - dmp sysdata xml WERInternalMetadata xml View a temporary copy of these files Warning If a virus or other security threat caused the problem opening a copy of the files could harm your computer Extra information about the problem BCCode c e BCP CE AB BCP C BCP BCP OS Version Service Pack Product Running the Windows Debugger utility I was able to retrieve this info from the mini-dump file Microsoft R Windows Debugger Version X Copyright c Microsoft Corporation All rights reserved Loading Dump File C Users owner Desktop - - dmp Mini Kernel Dump File Only registers and stack trace are available Symbol search path is Invalid Symbol loading may be unreliable without a symbol search path Use symfix to have the debugger choose a symbol path After setting your symbol path use reload to refresh symbol locations Executable search path is Symbols can not be loaded because symbol path is not initialized The Symbol Path can be set by using the NT SYMBOL PATH environment variable using the -y lt symbol path gt argument when starting the debugger using sympath and sympath Unable to load image SystemRoot system ntoskrnl exe Win error n WARNING Unable to verify timestamp for ntoskrnl exe ERROR Module load completed but symbols could not be loaded for ntoskrnl exe Windows Kernel Version Service Pack MP procs Free x compatible Product WinNt suite TerminalServer SingleUserTS Built by x fre win sp gdr - Machine Name Kernel base x c PsLoadedModuleList x d Debug session time Fri Feb UTC - System Uptime days Symbols can not be loaded because symbol path is not initialized The Symbol Path can be set by using the NT SYMBOL PATH environment variable using the -y lt symbol path gt argument when starting the debugger using sympath and sympath Unable to load image SystemRoot system ntoskrnl exe Win error n WARNING Unable to verify timestamp for ntoskrnl exe ERROR Module load completed but symbols could not be loaded for ntoskrnl exe Loading Kernel Symbols Loading User Symbols Loading unloaded module list

A:Unknown Bugcheck : Bugcheck c00002e3 - System is randomly Shutting OFF

I'm unable to figure out how to successfully use or read the information in the DMP file, so the answer may be right in front of me, but I'm unable to understand it.

Anyone tech savvy with Win 7 (32-bit) version to know what's up?

http://www.sevenforums.com/bsod-help-support/212356-unknown-bugcheck-bugcheck-c00002e3-system-randomly-shutting-off.html
Relevancy 52.03%

The computer has rebooted from a bugcheck was: a has computer bugcheck, bugcheck rebooted 0x000000d1 Occasional BSODs, from The bugcheck was x d xfffff c d x x xfffff c d A dump was saved in C Windows MEMORY DMP Report Id - - I got Occasional BSODs, computer has rebooted from a bugcheck, bugcheck was: 0x000000d1 a blue screen on a fairly new machine I ve seen them for a little while but they don t stay open long enough for me to read them The specs that I built were Motherboard ASUS P Occasional BSODs, computer has rebooted from a bugcheck, bugcheck was: 0x000000d1 P D-E Pro CPU Intel Core Occasional BSODs, computer has rebooted from a bugcheck, bugcheck was: 0x000000d1 i - Lynnfield GHz Video Card EVGA G-P - -TR GeForce GTX Superclocked Fermi Ram OCZ Reaper HPC GB x GB -Pin DDR SDRAM DDR PC Desktop Memory Model OCZ RPR LV GK Case COOLER MASTER RC- Power Supply SeaSonic X Gold W ATX V V EPS V V SLI Ready PLUS GOLD Certified Modular Active PFC Power Supply DVD Rom Drive Sony Optiarc Black X DVD Burner CPU Cooler Cooler Master Hyper N Hard Drive Western Digital Caviar Black WD FAEX TB RPM MB Cache SATA Gb s quot Internal Hard Drive -Bare Drive I additionally added an old wifi adapter and two hard drives I m not sure if the attached log is useful one that appears to have been created when this blue screen happened and another a couple weeks ago Anyone know what might be going on or what I should try It doesn t happen often enough for me to test fixes very easily so all help is appreciated Thanks nbsp

A:Occasional BSODs, computer has rebooted from a bugcheck, bugcheck was: 0x000000d1

Your issue is with memory corruption. Therefore you?ll need to run memtest on your RAM.

See the link below and follow the instructions. There is a newer version than what is listed; use the newer. If you need to see what the Memtest screen looks like go to reply #21. The third screen is the Memtest screen.

Step1 - Let it run for a LONG time. The rule is a minimum of 7 Passes; the more Passes after 7 so much the better. The only exception is if you start getting errors before 7 Passes then you can skip to Step 2.

There are 8 individual tests per Pass. Many people will start this test before going to bed and check it the next day.

If you have errors you have corrupted memory and it needs to be replaced.

Step 2 ? Because of errors you need to run this test per stick of RAM. Take out one and run the test. Then take that one out and put the other in and run the test. If you start getting errors before 7 Passes you know that stick is corrupted and you don?t need to run the test any further on that stick.


Link: http://www.techspot.com/vb/topic62524.html


* Get back to us with the results.


*** If Memtest shows no errors then find the voltage specs of your RAM and compare it to the voltage setting in your BIOS. Do they match?


* Also, check to see if your RAM makes Asus' Qualified Vendors List of memory for your motherboard. It will be on your motherboard's website page.
 

http://www.techspot.com/community/topics/occasional-bsods-computer-has-rebooted-from-a-bugcheck-bugcheck-was-0x000000d1.156429/
Relevancy 52.03%

I have been getting a ton of bsods I have re installed video drivers, updated and reinstalled windows 8. Did countless hardware test(Video ram, check memory, Cpu test) all passed temperatures stay around 25-35 c.
Recently uninstalled all video drivers and re installed. The bsods sometimes go away for a week or two but come back. and sometimes when it bsods there is a static noise inside of the computer, and the blue screen becomes distorted
Ive attached the dump files, if someone could help me pinpoint the piece of hardware so I can ship it out for repair please.

A:Random BSOD 0x00000124 Hall.dll (Bsod is distorted/static sound)

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 124, {0, ffffe00154472028, bf800000, 124}

Probably caused by : GenuineIntel

Followup: MachineOwner
---------
I know you said you've run hardware tests, but in our experience you have to run specific tests according to a specific regime. Run all of these and report back.

RAM - run a minimum of 8 consecutive passes, no less
RAM - Test with Memtest86+

CPU - run the STANDARD test only
CPU - Stress Test Using IntelBurnTest

Video - run for 20 mins
Video Card - Stress Test with Furmark

Storage - run the SHORT test only using the DOS version
SeaTools for DOS and Windows - How to Use

http://www.sevenforums.com/bsod-help-support/356563-random-bsod-0x00000124-hall-dll-bsod-distorted-static-sound.html
Relevancy 51.6%

I have been getting a ton of bsods I have re installed video drivers, updated and reinstalled windows 8. Did countless hardware test(Video ram, check memory, Cpu test) all passed temperatures stay around 25-35 c.
Recently uninstalled all video drivers and re installed. The bsods sometimes go away for a week or two but come back. and sometimes when it bsods there is a static noise inside of the computer, and the blue screen becomes distorted
Ive attached the dump files, if someone could help me pinpoint the piece of hardware so I can ship it out for repair please.

A:Random BSOD 0x00000124 Hall.dll (Bsod is distorted/static

Hi irunebar12 & Welcome to the forums ^_^,

I have analysed your dump files and below has been provided an analysis of the same for informative purposes :-

Code:
Error : DCACHEL0_WR_ERR (Proc 7 Bank 1)
Status : 0xbf80000000000124
Address : 0x0000000101d80bc0
Misc. : 0x0000000000000086


The dumps are consistent with the error that there was a problem in writing to the L0 Cache of the CPU. That is a dead CPU and hence you are getting the errors even after a fresh install.
See if you are getting any errors in Prime95 according to the below (thanks usasma) -






Prime95 download site: GIMPS - Free Prime95 software downloads - PrimeNet
Prime95 Setup:
- extract the contents of the zip file to a location of your choice
- double click on the executable file
- select "Just stress testing"
- select the "Blend" test. If you've already run MemTest overnight please run the "Small FFTs" test instead. (run all 3 if you find a problem and note how long it takes to error out with each)
- "Number of torture test threads to run" should equal the number of CPU's times 2 (if you're using hyperthreading).
The easiest way to figure this out is to go to Task Manager...Performance tab - and see the number of boxes under CPU Usage History
Then run the test for 6 to 24 hours - or until you get errors (whichever comes first).
Monitor the CPU temperature and DON'T let it exceed 85?C. If it does, then you probably have a CPU cooling problem.
- CPU temps exceeding 60?C can cause errors in Prime95. Fix the cooling solution first, then run Prime95 again.
This won't necessarily crash the system - but check the output in the test window for errors.
The Test selection box and the stress.txt file describes what components that the program stresses.
NOTE: Errors should be considered when:
- the system BSOD's during Prime95
- the system freezes during Prime95 (this is different than the extreme slowness caused by the program using all your RAM and CPU)
- the Prime95 program crashes
- the Prime95 program shows errors in it's display
- there are errors in the Prime95 results file
More details on the use of this test: Torture test your CPU with Prime95



Also, perform the Intel Burn Test according to the below link -
IntelBurnTest - The new stress-testing program
Let me know how it goes ^_^

http://www.eightforums.com/bsod-crashes-debugging/59184-random-bsod-0x00000124-hall-dll-bsod-distorted-static.html
Relevancy 51.6%

hi, i having a problem that my pc always rebooted while i am playing warcraft 3. My pc only restart when i playing the game.

Windows XP Professional SP3
Intel(R) Core(TM)2 Duo CPU
E4500 @2.20GHz
2.20GHZ , 1GB of RAM

(all the minidump is this error)
0x1000008e (0xc0000005, 0xae3c600b, 0xaba4571c, 0x00000000). A dump was saved in: C:\WINDOWS\Minidump\Mini120210-02.dmp.



what i had done:
switch the ram slot between Dimm 1 and Dimm2
reinstall window xp
reinstall the warcraft
remove graphic card to test

but the problem still occur. can you help me to analysis the minidump that i attached? it is the latest 3 minidump
Thanks
 

A:Computer has rebooted from a bugcheck.The bugcheck was: 0x1000008e (0xc0000005, 0xa

Is your system one you built yourself or is it a prebuilt one like a Dell, HP, etc.?
 

http://www.techspot.com/community/topics/computer-has-rebooted-from-a-bugcheck-the-bugcheck-was-0x1000008e-0xc0000005-0xa.157526/
Relevancy 51.17%

Hello fellas It's now like year BSOD and A0000001 BSOD random 0x00000124, without Shutdowns that im having troubles with my computer I had really many patience with it tried really anything i BSOD 0x00000124, A0000001 and random Shutdowns without BSOD could but now im done with my nerves and asking you to help Problem Many different BSOD's sometimes PC just Shutdown as if i took out the power cable And it freeze sometimes untill i reset it - The picture freezes sound stopped nothing changes even with ctrl alt del The Windows System Logs are full with Criticals Errors and Warnings They occur randomly not just while im playing d Games but even without any programms running Since i bought that custom hardware im having those BSODS Shutdowns etc sometimes x a week sometimes x day for many days in a row I guess it's a Hardware failure because i tried like Windows reinstalls Diferent Versions of Win with same bad result I've bought those parts x Phenom Processor with silent Cool Fan W power supply ASUS M A TD-V Radeon HD x GB Ram with passive cooling x TB WDC SATA What i already tried a After like year i asked the seller to help out He replaced following hardware motherboard power supply graphic card It didn't helped b I tried to remove x RAM then tried only with the other one c Installed windows on different Harddrives d Defragmented harddrives e updated drivers ran many quot optimizing quot tools btw they destroy only the system instead to improve it mostly f removed the dust cleaned the fan's replaced the processor thermal paste many times And its still the same shit What i guess is that some other Hardware is not working well but im not able to buy every part new and try to figure what it is by replacing all hardware pieces Because i can't know if the new hardware from the seller isn't broken aswell like the part i returned for it The only thing i didnt try to replace is the processor I upload the SF Diagnostic result and hope you could help me out I can't afford to buy a whole new PC but im suggesting its the only way out of it

A:BSOD 0x00000124, A0000001 and random Shutdowns without BSOD

The zip you uploaded does not contain any crash dump.

Follow it: Dump Files - Configure Windows to Create on BSOD
Go to Option Two, Point 2. Download the .reg file and merge it in registry by double clicking it.

Now wait for another BSOD. When it occurred, search the .dmp files manually in the default path: C:\Windows\Minidump or %SystemRoot%\Minidump. See if the crash dump is recorded or not (hopefully it will be recorded).Post it following the Blue Screen of Death (BSOD) Posting Instructions.

Also the MSINFO32 you uploaded it corrupt. So upload your MSINFO32.nfo file.
Click on the start button
Type "msinfo32" (without quotes) in the search bar of the start menu, click the resulting link. It will open the System Information window.
File>Save. In the "File Name" filed, put "MSINFO32" (without Quote), give the save location to desktop, and click the "save" button.
Give the time for processing, it will save a .nfo file on your desktop.
Zip it, and upload it following the instruction.
BTW, a stop 0x124 is a hardware issue, and you may follow Stop 0x124 - what it means and what to try. ATM cannot suggest anything more due to lack of data.

And a stop 0xA0000001 is associated with ATI/AMD display driver; inbuilt and inherent in it. If this error is followed by a driver update, try to Driver Rollback. If it is taking place irrespective of the driver version, change the GPU.

http://www.sevenforums.com/bsod-help-support/290477-bsod-0x00000124-a0000001-random-shutdowns-without-bsod.html
Relevancy 50.74%

Hey guys i'm troubleshooting a Dell Dimension and it is Blue Screening consistantly when it hits the winlogon screen It pauses BSOD for a few seconds then displays a sequence of distorted vertical lines BSOD D1 BugCheck indeffinitely Safemode and safemode with networking work like a charm no issues I system restored passed any recent updates and installs however the issue remains I'm still convinced its a driver issue the minidump reveals Code Bugcheck Analysis Use analyze -v to get detailed debugging information BugCheck D d f cfb df Probably caused by Unknown Image ANALYSIS INCONCLUSIVE Followup MachineOwner --------- kd gt analyze -v Bugcheck Analysis DRIVER IRQL NOT LESS OR EQUAL d An attempt was made to access a pageable or completely invalid address at an interrupt request BSOD BugCheck D1 level IRQL that is too high This is usually caused BSOD BugCheck D1 by drivers using improper addresses If kernel debugger is available get stack backtrace Arguments Arg d f memory referenced Arg IRQL Arg value read operation write operation Arg cfb df address which referenced memory Debugging Details ------------------ READ ADDRESS d f CURRENT IRQL FAULTING IP e cfb df b mov edx dword ptr edx h CUSTOMER CRASH COUNT DEFAULT BUCKET ID COMMON SYSTEM FAULT BUGCHECK STR xD PROCESS NAME System LAST CONTROL TRANSFER from f e b c to cfb df STACK TEXT WARNING Frame IP not in any known module Following frames may be wrong ef f e b c ef a x cfb df ef ef a NDIS ndisMiniDriverListLock ef c b xef a STACK COMMAND kb SYMBOL NAME ANALYSIS INCONCLUSIVE FOLLOWUP NAME MachineOwner MODULE NAME Unknown Module IMAGE NAME Unknown Image DEBUG FLR IMAGE TIMESTAMP FAILURE BUCKET ID xD ANALYSIS INCONCLUSIVE BUCKET ID xD ANALYSIS INCONCLUSIVE Followup MachineOwner DRIVER IRQL NOT LESS OR EQUAL d An attempt was made to access a pageable or completely invalid address at an interrupt request level IRQL that is too high This is usually caused by drivers using improper addresses There is the error the eventlog shows nothing too conclusive to help identify the source driver though there is a driver that is getting cought in an infinite loop occasionally however it doesnt do it consistant with the BSOD and it did it well prior to this boot up issue That being said f e b c is the last hex to have control of the system which traces to NDIS SYS He was trying to give control to some bogus address cfb df which is nobody But that nobody tried to read a memory location using IRQ and now we have a problem Here is the rest of the dump lmv Code kd gt lmv start end module name d eda nt pdb symbols C ProgramData dbg sym ntoskrnl pdb B F F CDDD A ADB D F A ntoskrnl pdb Loaded symbol image file ntoskrnl exe Mapped memory image file C ProgramData dbg sym ntoskrnl exe B AA a ntoskrnl exe Image path ntoskrnl exe Image name ntoskrnl exe Timestamp Tue Feb B AA CheckSum AA D ImageSize A File version Product version File flags Mask F File OS NT Win File type App File date Translations b CompanyName Microsoft Corporation ProductName Microsoft R Windows R Operating System InternalName ntoskrnl exe OriginalFilename ntoskrnl exe ProductVersion FileVersion xpsp sp gdr - FileDescription NT Kernel amp System LegalCopyright C Microsoft Corporation All rights reserved ee e hal deferred Mapped memory image file C ProgramData dbg sym halaacpi dll F halaacpi dll Image path halaacpi dll Image name halaacpi dll Timestamp Sun Apr F CheckSum F ImageSize File version Product version File flags Mask F File OS NT Win File type Dll File date Translations b CompanyName Microsoft Corporation ProductName Microsoft Windows Operating System InternalName halaacpi dll OriginalFilename halaacpi dll ProductVersion FileVersion xpsp - FileDescription Hardware Abstraction Layer DLL LegalCopyright Microsoft Corporation All rights reserved bf bf dxg deferred Mapped memory image file C ProgramData dbg sym dxg sys dxg sys Image path dxg sys Image name dxg sys Timestamp Sun Apr CheckSum C ImageSize File version Product version... Read more

A:BSOD BugCheck D1

Hi

I would do the exact same thing.
Uninstall the modem first - if that does not work then update your network drivers.

You can also try to uninstall your AVG and Mcafee (Security Center?), you can use these tools to do this:
AVG: http://www.avg.com/us-en/download-tools
McAfee: http://service.mcafee.com/FAQDocument.aspx?id=TS100507

Let us know if this works.

http://www.techsupportforum.com/forums/f10/bsod-bugcheck-d1-516630.html
Relevancy 50.74%

Hi all,

I'm having the same trouble. Could it be due RAM modules?? I uploaded dmp files and a screenshot of my RAM.

Please, I need help.

http://www.sevenforums.com/bsod-help-support/395992-bsod-bugcheck-24-a.html
Relevancy 50.74%

hey guys, i've got a xp sp3 laptop that started blue screening last week with bugcheck codes. I've ran through the hardware tests and everything looks ok. I believe it's software related but can't quite figure out what's causing it.

Can anyone help by looking at the dump files? Thanks in advance
 

A:XP SP3 bugcheck BSOD

The BSOD's are caused by the Atheros Wireless Adapter driver
 

http://www.techspot.com/community/topics/xp-sp3-bugcheck-bsod.179533/
Relevancy 50.74%

Hello in my last three months with my new computer with Windows I've come across a large amount of issues Most I have found fixes for bugcheck. BSOD from Possible some I have not been able to One of the many I haven't successfully found a fix Possible BSOD from bugcheck. for is an error that sometimes comes up after a BSOD To be specific Log Name System Source Microsoft-Windows-WER-SystemErrorReporting Date PM Event ID Task Category None Level Error Keywords Classic User N A Computer Ryan-PC Description The computer has rebooted from a bugcheck Possible BSOD from bugcheck. The bugcheck was x e xffffffffc xfffff fba cf xffffd f xffffd b A dump was saved in C WINDOWS MEMORY DMP Report Id e cfe-d e - b b- d- a c a Event Xml lt Event xmlns quot http schemas microsoft com win events event quot gt lt System gt lt Provider Name quot Microsoft-Windows-WER-SystemErrorReporting quot Guid quot ABCE E -DE - - - FA C quot EventSourceName quot BugCheck quot gt lt EventID Qualifiers quot quot gt lt EventID gt lt Version gt lt Version gt lt Level gt lt Level gt lt Task gt lt Task gt lt Opcode gt lt Opcode gt lt Keywords gt x lt Keywords gt lt TimeCreated SystemTime quot - - T Z quot gt lt EventRecordID gt lt EventRecordID gt lt Correlation gt lt Execution ProcessID quot quot ThreadID quot quot gt lt Channel gt System lt Channel gt lt Computer gt Ryan-PC lt Computer gt lt Security gt lt System gt lt EventData gt lt Data Name quot param quot gt x e xffffffffc xfffff fba cf xffffd f xffffd b lt Data gt lt Data Name quot param quot gt C WINDOWS MEMORY DMP lt Data gt lt Data Name quot param quot gt e cfe-d e - b b- d- a c a lt Data gt lt EventData gt lt Event gt As I have zero experience with event viewer in general and was unable to find anyone else with this issue I was hoping to find assistance with it Thanks and I'll keep an eye on this thread replying as often as possible RYAN-PC-Wed zip

A:Possible BSOD from bugcheck.

Troubleshooting a counterfeit installation is useless as it is not known what has been modified to your system.
A counterfeit installation contains heavily modified code which causes the system to behave in unexpected ways.
For this reason, analyzing counterfeit systems is unreliable and most analysts won't try it.
I recommend to install a genuine copy of Windows.
If, after you have installed a genuine copy of Windows, you still get BSOD's we'll be happy to assist you.

Code:
<ActivePartialProductKey>T83GX</ActivePartialProductKey>
<ActiveProductKeyPid2>00331-10000-00001-AA609</ActiveProductKeyPid2>
<OSVersion>10.0.10586.2.00010100.0.0.048</OSVersion>
<ProductName>Windows 10 Pro</ProductName>
<ProcessorArchitecture>x64</ProcessorArchitecture>
<EditionId>Professional</EditionId>
<BuildLab>10586.th2_release_inmarket.160222-1549</BuildLab>
<TimeZone>Eastern Standard Time(GMT-05:00)</TimeZone>
<ActiveSkuId>2de67392-b7a7-462a-b1ca-108dd189f588</ActiveSkuId>
<ActiveSkuDescription>Windows(R) Operating System, VOLUME_KMSCLIENT channel</ActiveSkuDescription>
<ProductUniquenessGroups>55c92734-d682-4d71-983e-d6ec3f16059f</ProductUniquenessGroups>
<ActiveProductKeyPKeyId>08e404fb-41f3-77ac-59ef-6e9f2d3f499d</ActiveProductKeyPKeyId>
<ActiveProductKeyPidEx>03612-03311-000-000001-03-1033-10586.0000-3532015</ActiveProductKeyPidEx>
<ActiveProductKeyChannel>Volume:GVLK</ActiveProductKeyChannel>
<ActiveVolumeCustomerPid>05426-00142-305-065216-03-1033-9200.0000-2142015</ActiveVolumeCustomerPid>
<OfflineInstallationId>568891371777551966784956066105545828036803673400306232304235522</OfflineInstallationId>
<DomainJoined>false</DomainJoined>
Forum rules





4) No piracy or discussion of piracy allowed at all. Such as software, music, videos and other intellectual property violations (e.g. downloading youtube videos locally etc).

http://www.tenforums.com/bsod-crashes-debugging/42734-possible-bsod-bugcheck.html
Relevancy 50.74%

Hi My laptop keeps giving me a BSOD after keeping the machine on for a short period of time I ran Memtest which did not find any problems I reimaged the computer but it came back as I was running Windows Update I would hugely appreciate some help Thanks in advance Here is the dmp file from the error Microsoft R Windows Debugger Version AMD Copyright c Microsoft Corporation All rights reserved Loading Dump File D Users Akar Desktop - - dmp Mini Kernel Dump File Only registers and stack trace are available Symbol search path is SRV C Symbols http msdl microsoft com download symbols Executable search path is Windows Kernel Version MP procs Free x Product WinNt suite TerminalServer SingleUserTS Personal Built by amd fre win gdr - Machine Name Kernel base xfffff PsLoadedModuleList xfffff a fe Debug session time Sat Dec UTC - System Uptime days Loading Kernel Symbols Loading User Symbols Loading unloaded module list Bugcheck Analysis Use analyze -v to get detailed debugging information BugCheck E ffffffffc fffff b b fffa Probably caused by ntkrnlmp exe nt RtlImageNtHeaderEx f Followup MachineOwner --------- kd gt analyze -v Bugcheck Analysis KMODE EXCEPTION NOT HANDLED e This is a very common bugcheck Usually the exception address pinpoints the driver function that caused the problem Always note this address as well as 1E BSOD Bugcheck the link date of the driver image that contains this address Arguments Arg ffffffffc The exception code that was not handled Arg fffff b b The address that the exception BSOD Bugcheck 1E occurred at Arg Parameter of the exception Arg fffa Parameter of the exception Debugging Details ------------------ EXCEPTION CODE NTSTATUS xc - The instruction at x lx referenced memory at x lx The memory could not be s FAULTING IP nt RtlImageNtHeaderEx f fffff b b a cmp word ptr rdx cx EXCEPTION PARAMETER EXCEPTION PARAMETER fffa READ ADDRESS GetPointerFromAddress unable to read from fffff b a e fffa ERROR CODE NTSTATUS xc - The instruction at x lx referenced memory at x lx The memory could not be s BUGCHECK STR x E c CUSTOMER CRASH COUNT DEFAULT BUCKET ID VISTA DRIVER FAULT PROCESS NAME mscorsvw exe CURRENT IRQL EXCEPTION RECORD fffff d -- exr xfffff d ExceptionAddress fffff b b nt RtlImageNtHeaderEx x f ExceptionCode c Access violation ExceptionFlags NumberParameters Parameter Parameter fffa Attempt to read from address fffa TRAP FRAME fffff d b -- trap xfffff d b NOTE The trap frame does not contain all registers Some register values may be zeroed or incorrect rax rbx rcx a d rdx fffa rsi rdi rip fffff b b rsp fffff d a rbp fffff d b r r fffff d a r r r r r r iopl nv up ei pl nz na pe nc nt RtlImageNtHeaderEx x f fffff b b a cmp word ptr rdx cx ds fffa Resetting default scope LAST CONTROL TRANSFER from fffff d b to fffff d c STACK TEXT fffff d fffff d b e ffffffff c fffff b b nt KeBugCheckEx fffff d fffff d c fffff d fffffa bad fffff d b nt KiDispatchException x b fffff d d fffff d a fffffa bad fffffa c nt KiExceptionDispatch xc fffff d b fffff b b fffff b fffff d a nt KiPageFault x a fffff d a fffff b fffff d a ffffffff cc nt RtlImageNtHeaderEx x f fffff d a fffffa b b fffff d b fffffa bd fffffa c nt RtlImageNtHeader x e fffff d a fffff d b fffffa bd fffffa c xfffffa b b fffff d a fffffa bd fffffa c xfffff d b STACK COMMAND kb FOLLOWUP IP nt RtlImageNtHeaderEx f fffff b b a cmp word ptr rdx cx SYMBOL STACK INDEX SYMBOL NAME nt RtlImageNtHeaderEx f FOLLOWUP NAME MachineOwner MODULE NAME nt IMAGE NAME ntkrnlmp exe DEBUG FLR IMAGE TIMESTAMP f d FAILURE BUCKET ID X x E c nt RtlImageNtHeaderEx f BUCKET ID X x E c nt RtlImageNtHeaderEx f Followup MachineOwner ---------

A:BSOD Bugcheck 1E

http://www.sevenforums.com/crashes-d...tructions.html

http://www.sevenforums.com/bsod-help-support/269313-bsod-bugcheck-1e.html
Relevancy 50.74%

Hi guys. I'm following the BSOD posting instructions. If I miss anything let me know

Windows 7 x64 ultimate

Mobo ga-790xta-ud4
CPU amd phenom II x4 965
Memory G.skill 8gb 1600 2x4gb 1.5v. f3-12800cl9d-8gbrl
Graphics Powercolor 6870
Hard Drives gskill fm-25s2s-120gbp2
st350032 0as
Power Supply OCZ modsomething. 550 watts I believe.

I received the bsod when idling in Lineage 2. It started a bugcheck, then restarted. This is my first bsod in quite a while, so I decided to post here

Any help is appreciated. Thanks in advance.

A:BSOD on BugCheck. Win 7 64

Hello Homer, Welcome to SF!

You have some old crash dumps in there too. Did you change anything to fix those or are they just sporadic?

There a couple of interesting things going on:

First Windows Updates, multiple failures there and multiple device drivers that seem to be unclear or unavailable in the dump info, that should be updated through WU. Seems as if that process was botched somehow.





Quote:
Please go to your Maintenance Center and check the Windows Update status. Make sure you are up to date, do them one by one manually if needed.
For help or reset see: Windows Update - Reset


Your second to last dump, shows a similar pattern. Also points to a standard W7 driver (atapi) that caused an inconsistent power state. That could mean something is wrong in your device power-settings somewhere but I would first finish the updates and check power/energy saving settings after new dumps occur.

http://www.sevenforums.com/bsod-help-support/179603-bsod-bugcheck-win-7-64-a.html
Relevancy 50.74%

I have recently received a BSOD for Page_Fault_In_Nonpaged_Area. I have done some research on this error and am aware that it relates to memory. I ran memtest86+ and received no errors. I am new to minidump analysis and I cannot seem to find the answer to my issue. I will include the minidump in this post. Any help would be greatly appreciated.

A:BSOD bugcheck 50

When running MemTest86+ to test memory, its important to run for a minimum of 8 consecutive passes - this is the minimum number need to thoroughly test RAM.

With your 16GB RAM, that will take several hours so I recommend running it overnight.

http://www.sevenforums.com/bsod-help-support/356944-bsod-bugcheck-50-a.html
Relevancy 50.74%

I'm Help BSOD BugCheck 124 please - getting this BSOD at least once every day I'm not sure if it could be a hardware problem BSOD BugCheck 124 - Help please or a driver problem The dump analysis is not really clear unless it's me having a problem understanding it So here's my dump file BSOD BugCheck 124 - Help please Microsoft R Windows Debugger Version AMD Copyright c Microsoft Corporation All rights reserved Loading Dump File C Windows MEMORY DMP Kernel Summary Dump File Only kernel address space is available Symbol search path is SRV d websymbols http msdl microsoft BSOD BugCheck 124 - Help please com download s ols D Symbols Executable search path is Windows Kernel Version MP procs Free x Product WinNt suite TerminalServer SingleUserTS Built by amd fre win rtm - Machine Name Kernel base xfffff c b PsLoadedModuleList xfffff e e Debug session time Wed Oct GMT- System Uptime days Loading Kernel Symbols Loading User Symbols Loading unloaded module list Bugcheck Analysis Use analyze -v to get detailed debugging information BugCheck fffffa a b Probably caused by hardware Followup MachineOwner --------- kd gt analyze -v Bugcheck Analysis WHEA UNCORRECTABLE ERROR A fatal hardware error has occurred Parameter identifies the type of error source that reported the error Parameter holds the address of the WHEA ERROR RECORD structure that describes the error conditon Arguments Arg Machine Check Exception Arg fffffa a Address of the WHEA ERROR RECORD structure Arg b High order -bits of the MCi STATUS value Arg Low order -bits of the MCi STATUS value Debugging Details ------------------ BUGCHECK STR x GenuineIntel DEFAULT BUCKET ID VISTA DRIVER FAULT PROCESS NAME System CURRENT IRQL f STACK TEXT fffff fe a fffff c fffffa a b nt KeBugCheckEx fffff fe aa fffff de fffffa a aa fffffa a aab hal HalBugCheckSystem x e fffff fe ae fffff c c fffffa a aa fffff fe e fffff fe e nt WheaReportHwError x fffff fe b fffff c f a fffffa a aa fffff fe e fffffa a aa hal HalpMcaReportError x c fffff fe c fffff c dd fffff fe ef hal HalpMceHandler x e fffff fe cd fffff c e fffffa fe hal HalpMceHandlerWithRendezvous x fffff fe d fffff ccb ac hal HalHandleMcheck x fffff fe d fffff ccb nt KxMcheckAbort x c fffff fe e fffff cd ee fffff fdb nt KiMcheckAbort x fffff fdb b fffff cd b fffffa fe f nt KiReadyThread xe fffff fdb e fffff cd e e edc fffff fdbc fffff e nt KiProcessExpiredTimerList x fffff fdbc fffff cd f bc f f b f nt KiTimerExpiration x be fffff fdbcd fffff cd fa fffff e e fffff e c fffff e db nt KiRetireDpcList x fffff fdbd fffff fdc fffff fd fffff fdbd nt KiIdleLoop x a STACK COMMAND kb FOLLOWUP NAME MachineOwner MODULE NAME hardware IMAGE NAME hardware DEBUG FLR IMAGE TIMESTAMP FAILURE BUCKET ID X x GenuineIntel PROCESSOR MAE BUCKET ID X x GenuineIntel PROCESSOR MAE Followup MachineOwner --------- kd gt lmvm hardware start end module name kd gt lmvm hardware start end module name At first my PC was often crashing when i was encoding movies to mp so i thought it was a problem But last night i started the encoding a a file to see if it would crash The encoding finished at am but the computer crashed around am So the PC was completely idle when it crashed Can somebody help me Many thanks

A:BSOD BugCheck 124 - Help please

I guess this thread should go under : Crashes and Debugging.

Sorry about that.
Can somebody move it there?

thanks,

http://www.sevenforums.com/bsod-help-support/32959-bsod-bugcheck-124-help-please.html
Relevancy 50.74%

- Windows 7 x64 bit;
- the original installed OS on the system: windows 7 professional 64 bit;
- full retail version;
- the age of system (hardware) one year;
- the age of OS installation: seven months after last installation.

This is my first time I get the bugcheck 101; I wonder why.

Thank you.

A:[BSOD] Bugcheck 101; what is it?

It's a hardware related error message.
It can sometimes be caused by a overclock that has become unstable.
Stop 0x124 - what it means and what to try


Code:
WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000004, PCI Express Error
Arg2: fffffa8007b6a8d8, Address of the WHEA_ERROR_RECORD structure.
Arg3: 0000000000000000
Arg4: 0000000000000000

Debugging Details:
------------------
BUGCHECK_STR: 0x124_4

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

PROCESS_NAME: System

CURRENT_IRQL: a

STACK_TEXT:
fffff880`0338ca78 fffff800`03e1ca3b : 00000000`00000124 00000000`00000004 fffffa80`07b6a8d8 00000000`00000000 : nt!KeBugCheckEx
fffff880`0338ca80 fffff800`03fe0513 : 00000000`00000001 fffffa80`07ac40c0 00000000`00000000 fffffa80`07ac3b60 : hal!HalBugCheckSystem+0x1e3
fffff880`0338cac0 fffff880`00f96bcf : fffffa80`00000750 fffffa80`07ac40c0 00000000`00000000 fffffa80`07b6a010 : nt!WheaReportHwError+0x263
fffff880`0338cb20 fffff880`00f965f6 : 00000000`00000000 fffff880`0338cc70 fffffa80`07cf7d80 fffffa80`06d41680 : pci!ExpressRootPortAerInterruptRoutine+0x27f
fffff880`0338cb80 fffff800`03ecba7c : fffff880`03364180 00000000`00000000 fffffa80`07cf7d80 fffff800`03ec5e01 : pci!ExpressRootPortInterruptRoutine+0x36
fffff880`0338cbf0 fffff800`03ec7942 : fffff880`03364180 fffff880`00000001 00000000`00000001 fffff800`00000000 : nt!KiInterruptDispatch+0x16c
fffff880`0338cd80 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiIdleLoop+0x32
STACK_COMMAND: kb

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: hardware

IMAGE_NAME: hardware

DEBUG_FLR_IMAGE_TIMESTAMP: 0

FAILURE_BUCKET_ID: X64_0x124_4_PCIEXPRESS

BUCKET_ID: X64_0x124_4_PCIEXPRESS

Followup: MachineOwner
---------

http://www.sevenforums.com/bsod-help-support/192884-bsod-bugcheck-101-what.html
Relevancy 50.74%

Hi,

I turned on my Computer this morning and all was okay until I watched a Youtube video then my computer became slow and then crashed

I have attached the minidump to this post

If you want any more information then please ask

Josh

A:BSOD - BugCheck 3B

STOP 0x0000003B: SYSTEM_SERVICE_EXCEPTION

Usual causes: System service, Device driver, graphics driver, ?memory

Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64

Code:

Copyright (c) Microsoft Corporation. All rights reserved.

Loading Dump File [C:\Users\richc46\AppData\Local\Temp\Temp1_060211-13634-01.zip\060211-13634-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17592.amd64fre.win7sp1_gdr.110408-1631
Machine Name:
Kernel base = 0xfffff800`02e01000 PsLoadedModuleList = 0xfffff800`03046650
Debug session time: Thu Jun 2 05:33:30.356 2011 (GMT-4)
System Uptime: 0 days 0:09:05.573
Loading Kernel Symbols
...............................................................
................................................................
.......................................
Loading User Symbols
Loading unloaded module list
......
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 3B, {c0000005, fffff80002fac617, fffff88004523c00, 0}
Probably caused by : ntkrnlmp.exe ( nt!ExAllocatePoolWithTag+537 )
Followup: MachineOwner
---------
0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff80002fac617, Address of the exception record for the exception that caused the bugcheck
Arg3: fffff88004523c00, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.
Debugging Details:
------------------

EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
FAULTING_IP:
nt!ExAllocatePoolWithTag+537
fffff800`02fac617 48895808 mov qword ptr [rax+8],rbx
CONTEXT: fffff88004523c00 -- (.cxr 0xfffff88004523c00)
rax=fffef8a00540d820 rbx=fffffa8002358920 rcx=fffff8a00540b820
rdx=0000000000000610 rsi=0000000000000062 rdi=0000000080000001
rip=fffff80002fac617 rsp=fffff880045245e0 rbp=0000000000001000
r8=0000000000000001 r9=fffffa8002358920 r10=fffffa8002358008
r11=fffffa80069ab8d0 r12=fffffa8002358000 r13=0000000000000000
r14=fffffa8005766660 r15=0000000074536d4d
iopl=0 nv up ei pl zr na po nc
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010246
nt!ExAllocatePoolWithTag+0x537:
fffff800`02fac617 48895808 mov qword ptr [rax+8],rbx ds:002b:fffef8a0`0540d828=????????????????
Resetting default scope
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x3B
PROCESS_NAME: MsMpEng.exe
CURRENT_IRQL: 0
LAST_CONTROL_TRANSFER: from 0000000000000000 to fffff80002fac617
STACK_TEXT:
fffff880`045245e0 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!ExAllocatePoolWithTag+0x537

FOLLOWUP_IP:
nt!ExAllocatePoolWithTag+537
fffff800`02fac617 48895808 mov qword ptr [rax+8],rbx... Read more

http://www.sevenforums.com/bsod-help-support/166753-bsod-bugcheck-3b.html
Relevancy 50.74%

Please help Thanks Microsoft reg Windows Debugger Version AMD Copyright copy Microsoft Corporation All rights reserved Loading Dump File C Users JinXiang Downloads - - dmp Mini Kernel Dump File Only registers and stack trace are available Symbol Path validation BSOD 50 BugCheck summary Response Time ms BSOD BugCheck 50 Location Deferred SRV C SymCache http msdl microsoft com download symbols Symbol search path is SRV C SymCache http msdl microsoft com download symbols Executable search path is Windows Kernel Version MP procs Free x BSOD BugCheck 50 Product WinNt suite TerminalServer SingleUserTS Built by amd fre win rtm - BSOD BugCheck 50 Machine Name Kernel base xfffff c PsLoadedModuleList xfffff e Debug session time Wed Oct UTC System Uptime days Loading Kernel Symbols Press ctrl-c cdb kd ntsd or ctrl-break windbg to abort symbol loads that take too long Run sym noisy before reload to track down problems loading symbols Loading User Symbols Loading unloaded module list Bugcheck Analysis Use analyze -v to get detailed debugging information BugCheck fffff c fdc fffff fc d Could not read faulting driver name Probably caused by win k sys win k SFMLOGICALSURFACE OwnsSurfaceCleanup d Followup MachineOwner --------- kd gt analyze -v Bugcheck Analysis PAGE FAULT IN NONPAGED AREA Invalid system memory was referenced This cannot be protected by try-except it must be protected by a Probe Typically the address is just plain bad or it is pointing at freed memory Arguments Arg fffff c fdc memory referenced Arg value read operation write operation Arg fffff fc d If non-zero the instruction address which referenced the bad memory address Arg reserved Debugging Details ------------------ Could not read faulting driver name READ ADDRESS GetPointerFromAddress unable to read from fffff c e GetUlongFromAddress unable to read from fffff c fffff c fdc FAULTING IP win k SFMLOGICALSURFACE OwnsSurfaceCleanup d fffff fc d b f mov rcx qword ptr rdi h MM INTERNAL CODE CUSTOMER CRASH COUNT DEFAULT BUCKET ID WIN DRIVER FAULT BUGCHECK STR x PROCESS NAME dwm exe CURRENT IRQL ANALYSIS VERSION debuggers dbg - amd fre TRAP FRAME fffff ad e -- trap xfffff ad e NOTE The trap frame does not contain all registers Some register values may be zeroed or incorrect rax rbx rcx fffff c c rdx rsi rdi rip fffff fc d rsp fffff ad a rbp r r r fffff c r f r r r r iopl nv up ei pl zr na po nc win k SFMLOGICALSURFACE OwnsSurfaceCleanup x d fffff fc d b f mov rcx qword ptr rdi h ds Resetting default scope LAST CONTROL TRANSFER from fffff d e to fffff df STACK TEXT fffff ad fffff d e fffff c fdc fffff ad e nt KeBugCheckEx fffff ad fffff bfee fffff c c nt FNODOBFM string' x fffff ad e fffff fc d b nt KiPageFault x e fffff ad a fffff fbbae fffff c c d d win k SFMLOGICALSURFACE OwnsSurfaceCleanup x d fffff ad aa fffff fcab fffff c c fc win k SFMLOGICALSURFACE DeInitialize x e fffff ad ae fffff ff fffff c be fffff c c win k bhLSurfDestroyLogicalSurfaceObject x b fffff ad b fffff a fffff ad c win k GreSfmCloseCompositorRef x f fffff ad b fffff d ffffffff fffffa fffffa win k NtGdiHLSurfSetInformation x a fffff ad be fe ff efa nt KiSystemServiceCopyEnd x ef x fe ff efa STACK COMMAND kb FOLLOWUP IP win k SFMLOGICALSURFACE OwnsSurfaceCleanup d fffff fc d b f mov rcx qword ptr rdi h SYMBOL STACK INDEX SYMBOL NAME win k SFMLOGICALSURFACE OwnsSurfaceCleanup d FOLLOWUP NAME MachineOwner MODULE NAME win k IMAGE NAME win k sys DEBUG FLR IMAGE TIMESTAMP a bc e IMAGE VERSION FAILURE BUCKET ID X x win k SFMLOGICALSURFACE OwnsSurfaceCleanup d BUCKET ID X x win k SFMLOGICALSURFACE OwnsSurfaceCleanup d ANALYSIS SOURCE KM FAILURE ID HASH STRING km x x win k sfmlogicalsurface ownssurfacecleanup d FAILURE ID HASH c -aeb - f- d - f c Followup MachineOwner --------- PC SPECS http speccy piriform com results dsvR rYL a VgyCLBLCCI

A:BSOD BugCheck 50

Please download MiniToolBox  , save it to your desktop and run it.
 Checkmark the following checkboxes:  List last 10 Event Viewer log  List Installed Programs  List Users, Partitions and Memory size.
 Click Go and paste the content into your next post.
 
Louis

http://www.bleepingcomputer.com/forums/t/550543/bsod-bugcheck-50/
Relevancy 50.74%

Hey guys, Ive been getting random BSODs. Usually its when i am watching videos, but lately it will do it when my PC is on its screen saver and sometimes when its shutting down. It can go days between errors then ill get 3 within 10 minutes of each other. I have done memory tests and updated all my drivers. I attempted to follow your instructions so if i need to add more please let me know. Thanks in advance

A:BSOD bugcheck

DocZ you had 2 dump files, which is what we use to debug. Unfortunately neither one of them gave us any information.

If you would, please make sure your firmware for your SSD is up to date. I have a frw Crucials and there was a bug in the older firmware that would cause BSODs in certain circumstances. They fixed that fairly quickly with a firmware update,

Open a elevated command prompt ( click start, type cmd in the search box, right click on the cmd entry and select run as administrator) in the black box that opens, copy/paste sfc /scannow. If you decide to type it, notice the space between the sfc and the /. It is a system file checker which will scan your system files and attempt to correct any missing or corrupt files. What we want are the results to say windows found no integrity violations. If it says files were found but could not be repaired, close the box, reboot and run it again, after opening the administrative command prompt. You may have to reboot and run it three times for it to repair all system files. If it can't repair them after 3 reboots, let us know.

Please ley us know how it goes. If you get more BSODs, please run Blue Screen of Death (BSOD) Posting Instructions again. This time try option #2 and press the 'Grab All' button and give it plenty of time to do it's work. Then upload all files here, in your next Post.

http://www.sevenforums.com/bsod-help-support/346073-bsod-bugcheck.html
Relevancy 50.31%

Log Name nbsp nbsp nbsp System Source nbsp nbsp nbsp nbsp Id: has saved 051816-36359-01. was: 0x00000050 The The a 0xfffff8032cb1ec72, computer (0xffffd00044c68858, bugcheck. Report 0x0000000000000000, from dump C:\WINDOWS\MEMORY.DMP. bugcheck in: 0x0000000000000002). A rebooted was Microsoft-Windows-WER-SystemErrorReporting Date nbsp nbsp nbsp nbsp nbsp AM Event ID nbsp nbsp nbsp Task Category None Level nbsp nbsp nbsp nbsp Error Keywords nbsp nbsp nbsp Classic User nbsp nbsp nbsp nbsp nbsp N A Computer nbsp nbsp nbsp CEOWIN Description The computer has rebooted from a bugcheck nbsp The bugcheck was x xffffd c x xfffff cb ec x A dump was saved in C WINDOWS The computer has rebooted from a bugcheck. The bugcheck was: 0x00000050 (0xffffd00044c68858, 0x0000000000000000, 0xfffff8032cb1ec72, 0x0000000000000002). A dump was saved in: C:\WINDOWS\MEMORY.DMP. Report Id: 051816-36359-01. MEMORY DMP Report Id - - Event Xml lt Event xmlns quot http schemas microsoft com win events event quot gt nbsp lt System gt nbsp nbsp lt Provider Name quot Microsoft-Windows-WER-SystemErrorReporting quot Guid quot ABCE E -DE - - - FA C quot EventSourceName quot BugCheck quot gt nbsp nbsp lt EventID Qualifiers quot quot gt lt The computer has rebooted from a bugcheck. The bugcheck was: 0x00000050 (0xffffd00044c68858, 0x0000000000000000, 0xfffff8032cb1ec72, 0x0000000000000002). A dump was saved in: C:\WINDOWS\MEMORY.DMP. Report Id: 051816-36359-01. EventID gt nbsp nbsp lt Version gt lt Version gt nbsp nbsp lt Level gt lt Level gt nbsp nbsp lt Task gt lt Task gt nbsp nbsp lt Opcode gt The computer has rebooted from a bugcheck. The bugcheck was: 0x00000050 (0xffffd00044c68858, 0x0000000000000000, 0xfffff8032cb1ec72, 0x0000000000000002). A dump was saved in: C:\WINDOWS\MEMORY.DMP. Report Id: 051816-36359-01. lt Opcode gt nbsp nbsp lt Keywords gt x lt Keywords gt nbsp nbsp lt TimeCreated SystemTime quot - - T Z quot gt nbsp nbsp lt EventRecordID gt lt EventRecordID gt nbsp nbsp lt Correlation gt nbsp nbsp lt Execution ProcessID quot quot ThreadID quot quot gt nbsp nbsp lt Channel gt System lt Channel gt nbsp nbsp lt Computer gt CEOWIN lt Computer gt nbsp nbsp lt Security gt nbsp lt System gt nbsp lt EventData gt nbsp nbsp lt Data Name quot param quot gt x xffffd c x xfffff cb ec x lt Data gt nbsp nbsp lt Data Name quot param quot gt C WINDOWS MEMORY DMP lt Data gt nbsp nbsp lt Data Name quot param quot gt - - lt Data gt nbsp lt EventData gt lt Event gt Dump file is located in nbsp https onedrive live com redir resid F F A amp authkey AJ Xmj muezoaac amp ithint file cDMP

https://social.technet.microsoft.com/Forums/en-US/ddea21bb-6dc3-4f28-a969-e425ac035468/the-computer-has-rebooted-from-a-bugcheck-the-bugcheck-was-0x00000050-0xffffd00044c68858?forum=w7itprogeneral
Relevancy 50.31%

Please help computer always restarts Log Name nbsp nbsp nbsp System Source nbsp nbsp nbsp nbsp Microsoft-Windows-WER-SystemErrorReporting Date nbsp nbsp nbsp nbsp nbsp AM Event ID nbsp nbsp nbsp Task Category None Level nbsp nbsp nbsp nbsp Error Keywords nbsp nbsp nbsp Classic User nbsp nbsp nbsp nbsp nbsp N A Computer nbsp nbsp nbsp WIN Description The computer has rebooted from a bugcheck nbsp The bugcheck was x xffffd c x xfffff cb ec x A dump was saved in C WINDOWS MEMORY DMP Report Id - - Event Xml lt Event xmlns quot http a dump The in: bugcheck. A was from C:\WINDOWS\MEMORY.DMP. Id: saved 0xfffff8032cb1ec72, rebooted 0x0000000000000000, has 051816-36359-01. was: computer 0x00000050 Report (0xffffd00044c68858, 0x0000000000000002). The bugcheck schemas microsoft com win events event quot gt nbsp lt System gt nbsp nbsp lt Provider Name quot Microsoft-Windows-WER-SystemErrorReporting The computer has rebooted from a bugcheck. The bugcheck was: 0x00000050 (0xffffd00044c68858, 0x0000000000000000, 0xfffff8032cb1ec72, 0x0000000000000002). A dump was saved in: C:\WINDOWS\MEMORY.DMP. Report Id: 051816-36359-01. quot Guid quot ABCE E -DE - - - FA C quot EventSourceName quot BugCheck quot gt nbsp nbsp lt EventID Qualifiers quot quot gt lt EventID gt nbsp nbsp lt Version gt lt Version gt nbsp nbsp lt The computer has rebooted from a bugcheck. The bugcheck was: 0x00000050 (0xffffd00044c68858, 0x0000000000000000, 0xfffff8032cb1ec72, 0x0000000000000002). A dump was saved in: C:\WINDOWS\MEMORY.DMP. Report Id: 051816-36359-01. Level gt lt Level gt nbsp nbsp lt Task gt lt Task gt nbsp nbsp lt Opcode gt lt Opcode gt nbsp nbsp lt Keywords gt x lt Keywords gt nbsp nbsp lt TimeCreated SystemTime quot - - T Z quot gt nbsp nbsp lt EventRecordID gt lt EventRecordID gt nbsp nbsp lt Correlation gt nbsp nbsp lt Execution ProcessID quot quot ThreadID quot quot gt nbsp nbsp lt Channel gt System lt Channel gt nbsp nbsp lt Computer gt CEOWIN lt Computer gt nbsp nbsp lt Security gt nbsp lt System gt nbsp lt EventData gt nbsp nbsp lt Data Name quot param quot gt x xffffd c x The computer has rebooted from a bugcheck. The bugcheck was: 0x00000050 (0xffffd00044c68858, 0x0000000000000000, 0xfffff8032cb1ec72, 0x0000000000000002). A dump was saved in: C:\WINDOWS\MEMORY.DMP. Report Id: 051816-36359-01. xfffff cb ec x lt Data gt nbsp nbsp lt Data Name quot param quot gt C WINDOWS MEMORY DMP lt Data gt nbsp nbsp lt Data Name quot param quot gt - - lt Data gt nbsp lt EventData gt lt Event gt Dump file link below https onedrive live com redir resid F F A amp authkey AJ Xmj muezoaac amp ithint file cDMP Please help

https://social.technet.microsoft.com/Forums/en-US/34022a58-b7ef-41fc-9feb-0d9017fae14f/the-computer-has-rebooted-from-a-bugcheck-the-bugcheck-was-0x00000050-0xffffd00044c68858?forum=w7itprogeneral
Relevancy 50.31%

Log Name nbsp nbsp nbsp System Source nbsp nbsp nbsp nbsp Microsoft-Windows-WER-SystemErrorReporting Date nbsp nbsp nbsp nbsp nbsp AM Event ID nbsp nbsp nbsp Task Category None Level nbsp nbsp nbsp nbsp Error Keywords nbsp nbsp nbsp Classic User nbsp nbsp nbsp nbsp nbsp N A Computer nbsp nbsp nbsp WIN Description The computer has rebooted from a bugcheck nbsp The bugcheck was x xffffd A from (0xffffd00044c68858, 0x0000000000000000, was 0x00000050 The bugcheck bugcheck. was: C:\WINDOWS\MEMORY.DMP. 0x0000000000000002). Id: dump rebooted The a 0xfffff8032cb1ec72, in: saved 051816-36359-01. Report computer has c x xfffff cb ec x A dump was saved in C WINDOWS MEMORY DMP Report Id - - Event Xml lt Event xmlns quot http schemas microsoft com win events event quot gt nbsp lt System gt nbsp nbsp lt Provider Name quot Microsoft-Windows-WER-SystemErrorReporting quot Guid quot ABCE E -DE - - - FA C quot EventSourceName quot BugCheck quot gt nbsp nbsp lt EventID Qualifiers quot quot gt lt EventID gt nbsp nbsp lt Version gt lt Version gt nbsp nbsp lt Level gt lt Level gt nbsp nbsp lt Task gt lt Task gt nbsp nbsp lt Opcode gt lt Opcode gt nbsp nbsp The computer has rebooted from a bugcheck. The bugcheck was: 0x00000050 (0xffffd00044c68858, 0x0000000000000000, 0xfffff8032cb1ec72, 0x0000000000000002). A dump was saved in: C:\WINDOWS\MEMORY.DMP. Report Id: 051816-36359-01. lt Keywords gt x lt The computer has rebooted from a bugcheck. The bugcheck was: 0x00000050 (0xffffd00044c68858, 0x0000000000000000, 0xfffff8032cb1ec72, 0x0000000000000002). A dump was saved in: C:\WINDOWS\MEMORY.DMP. Report Id: 051816-36359-01. Keywords gt nbsp nbsp lt TimeCreated SystemTime quot - - T Z quot gt nbsp nbsp lt EventRecordID gt lt EventRecordID gt nbsp nbsp lt Correlation gt nbsp nbsp lt Execution ProcessID quot quot ThreadID quot quot gt nbsp nbsp lt Channel gt System lt Channel gt nbsp nbsp lt Computer gt CEOWIN lt Computer gt nbsp nbsp lt Security gt nbsp lt System gt nbsp lt EventData gt nbsp nbsp lt Data Name quot param quot gt x xffffd c x xfffff cb ec x lt Data gt nbsp nbsp lt Data Name quot param quot gt C WINDOWS MEMORY DMP lt Data gt nbsp nbsp lt Data Name quot param quot gt - - lt Data gt nbsp lt EventData gt lt Event gt

https://social.technet.microsoft.com/Forums/en-US/29498995-8ca9-4712-a69a-5f3a4b9b6c0f/the-computer-has-rebooted-from-a-bugcheck-the-bugcheck-was-0x00000050-0xffffd00044c68858?forum=w7itprogeneral
Relevancy 50.31%

I'm new to this forum and in fact new to forums generally. I just tend to struggle on and spend a lot of time reading other peoples solutions. I hope you can help me with my periodically BSOD and I tend to go back to a good known recovery point. But recently these BSOD have been happening more frequently and restore points no longer help. The most recent one was this morning when I first powered on the system, and thinking about it most of them are during start up. Any assistance would be appreciated. I have ran your capture and I'm about to attempt to upload it.
Thanks in advance.

A:The computer has rebooted from a bugcheck. The bugcheck was: 0x000000

You are having stop 0xF4 BSOD issue over a long time, which is supposed to be a storage related issue.

As a starting point, scan your HDD using Data Lifeguard Diagnostic for Windows. Also post a screenshot of your HDD using CrystalDiskInfo - Software - Crystal Dew World.

If possible, update your BIOS/Chipset.

Let us know the results.

http://www.sevenforums.com/bsod-help-support/311109-computer-has-rebooted-bugcheck-bugcheck-0x000000.html
Relevancy 50.31%

i have been getting a couple of bluescreens and when i check the event 0x0000007e rebooted from The computer a The was: bugcheck. has bugcheck log under system it shows up with - lt Event xmlns http schemas microsoft com win events event gt The computer has rebooted from a bugcheck. The bugcheck was: 0x0000007e - lt System gt lt Provider Name Microsoft-Windows-WER-SystemErrorReporting Guid The computer has rebooted from a bugcheck. The bugcheck was: 0x0000007e ABCE E -DE - - - FA C EventSourceName BugCheck gt lt EventID Qualifiers gt lt EventID gt lt Version gt lt Version gt lt Level gt lt Level gt lt Task gt lt Task gt lt Opcode gt lt Opcode gt lt Keywords gt x lt Keywords gt lt TimeCreated SystemTime - - T Z gt lt EventRecordID gt lt EventRecordID gt lt Correlation gt lt Execution ProcessID ThreadID gt lt Channel gt System lt Channel gt lt Computer gt james-PC lt Computer gt lt Security gt lt System gt - lt EventData gt lt Data Name param gt x e xffffffffc xfffff ca fd xfffff fc a xfffff fbf lt Data gt lt Data Name param gt C Windows MEMORY DMP lt Data gt lt Data Name param gt - - lt Data gt lt EventData gt lt Event gt please help any ty again for your time guys

A:The computer has rebooted from a bugcheck. The bugcheck was: 0x0000007e

Download BlueScreenView:
http://www.nirsoft.net/utils/blue_screen_view.html
unzip downloaded file and double click on BlueScreenView.exe to run the program.
when scanning is done, go to EDIT - Select All
Go to FILE - SAVE Selected Items, and save the report as BSOD.txt
Open BSOD.txt in Notepad, copy all of the content, and paste it into your next reply

http://www.bleepingcomputer.com/forums/t/493317/the-computer-has-rebooted-from-a-bugcheck-the-bugcheck-was-0x0000007e/
Relevancy 50.31%

A new PC with the following configuration is randomly restarting on me as a result of a was: bugcheck. bugcheck The computer 0x0000009f rebooted from has The a bugcheck error I've attached the dump file to this thread Asus x motherboard Intel core i - Ghz MB x GB G Kill Ripjaws V F - C D Samsung Pro MZ-V P BW GB SATA III M SSD Asus STRIX-GTX -DC OC- GD G GTX VGA Card Windows Pro bit The error in details Log The computer has rebooted from a bugcheck. The bugcheck was: 0x0000009f Name System Source Microsoft-Windows-WER-SystemErrorReporting Date PM Event ID Task Category None Level Error Keywords Classic User N A Computer Sandra-PC Description The The computer has rebooted from a bugcheck. The bugcheck was: 0x0000009f computer has rebooted from a bugcheck The bugcheck was x f x xffffe fccba xfffff b b xffffe f b The computer has rebooted from a bugcheck. The bugcheck was: 0x0000009f A dump was saved in C WINDOWS MEMORY DMP Report Id bc bcd -d - b-b - b e feef Event Xml lt Event xmlns quot http schemas microsoft com win events event quot gt lt System gt lt Provider Name quot Microsoft-Windows-WER-SystemErrorReporting quot Guid quot ABCE E -DE - - - FA C quot EventSourceName quot BugCheck quot gt lt EventID Qualifiers quot quot gt lt EventID gt lt Version gt lt Version gt lt Level gt lt Level gt lt Task gt lt Task gt lt Opcode gt lt Opcode gt lt Keywords gt x lt Keywords gt lt TimeCreated SystemTime quot - - T Z quot gt lt EventRecordID gt lt EventRecordID gt lt Correlation gt lt Execution ProcessID quot quot ThreadID quot quot gt lt Channel gt System lt Channel gt lt Computer gt Sandra-PC lt Computer gt lt Security gt lt System gt lt EventData gt lt Data Name quot param quot gt x f x xffffe fccba xfffff b b xffffe f b lt Data gt lt Data Name quot param quot gt C WINDOWS MEMORY DMP lt Data gt lt Data Name quot param quot gt bc bcd -d - b-b - b e feef lt Data gt lt EventData gt lt Event gt

A:The computer has rebooted from a bugcheck. The bugcheck was: 0x0000009f

If this is a brand new computer as you say, then take it back, it's under warranty.
If you insist on troubleshooting this on your own, then please click on this link Blue Screen of Death (BSOD) Posting Instructions - Windows 10, 8.1, 8, 7 & Vista and post in that section of the forum and not here please:

http://www.techsupportforum.com/forums/f299/the-computer-has-rebooted-from-a-bugcheck-the-bugcheck-was-0x0000009f-1106105.html
Relevancy 50.31%

I have been having multiple BSOD's for the last 4-5 months. Sometimes I don't even get a blue screen, it just goes black. I ran the attached file while in safe mode with networking. I have no idea how to check display drivers. (I've read on other posts that these seem to be the problem) This last BSOD and when there is an actual blue screen, the screen doesn't stay on long enough to actually read what happened. In the event log I found this:
The computer has rebooted from a bugcheck. The bugcheck was: 0x0000001e
As you can tell, I'm certainly no IT professional or hobbyist so I apologize for my ignorance in advance.

A:Computer has rebooted from a bugcheck. The bugcheck was: 0x0000001e

Please uninstall Advanced SystemCare 8 while troubleshooting.
Please update or remove Acronis

Code:
fffff880`06cbaf68 fffff880`01bbd801Unable to load image snapman.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for snapman.sys
*** ERROR: Module load completed but symbols could not be loaded for snapman.sys
snapman+0x28801
Please uninstall Avast and use Microsoft Security Essentials as alternative while troubleshooting
Avast - Uninstall Completely
Microsoft Security Essentials - Microsoft Windows

Code:
fffff880`059bc7f0 fffff880`03ef6a11Unable to load image aswSnx.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for aswSnx.sys
*** ERROR: Module load completed but symbols could not be loaded for aswSnx.sys
aswSnx+0xeda11

http://www.sevenforums.com/bsod-help-support/387531-computer-has-rebooted-bugcheck-bugcheck-0x0000001e.html
Relevancy 50.31%

Help me!... I dont know why this started to happen but happens somewhere between twice and three times per day.

I attached my Memory.DMP file which is where it said the error was logged. To be specific this was my error.


The computer has rebooted from a bugcheck. The bugcheck was: 0x0000000a (0x0000000000000008, 0x0000000000000002, 0x0000000000000001, 0xfffff80002ae2c71). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 062911-21265-01.

If anyone can tell me whats going on from the Memory.DMP file, please let me know whats wrong and how you came to that conclusion.

Thanks in advanced

A:The computer has rebooted from a bugcheck. The bugcheck was: 0x000000

Hello Xylems, welcome to SF!

You're upload did not succeed so we can't really help yet...
Please follow this tutorial fully:
http://www.sevenforums.com/crashes-d...tructions.html

We'll get back to you after analysis of your upload...

http://www.sevenforums.com/bsod-help-support/172491-computer-has-rebooted-bugcheck-bugcheck-0x000000.html
Relevancy 50.31%

I have the exact same problem I just bought a brand new computer with Win installed and it keeps freezing I have updated all drivers When 116 Bugcheck: 7 Unknown bit 64 Freezes Windows Bugcheck running the Startup Repair I wrote down this from the screen because I thought it would be of help for all you smart people Root cause found Unknown Bugcheck Bugcheck I Windows 7 64 bit Freezes Unknown Bugcheck: Bugcheck 116 am no computer geek and thought about taking Windows 7 64 bit Freezes Unknown Bugcheck: Bugcheck 116 it back to the shop and having them send it for a service check I have very bad experience with that it's the last thing I want to do But is there really nothing else to do I will post the version of the bios when I get home As for the model of my psu it is a Kingwin watt Maximum Power Supply I went to one of those power consumption calculator online to measure my power When Windows 7 64 bit Freezes Unknown Bugcheck: Bugcheck 116 I calculated it said that my minimum power wattage should be Watts I multiplied that by percent just to be safe so I would say that my minimum watts should be around watts My power supply is a watts and just to be safe lets say that my power supply has efficiency so my power supply would be pushing out watts So if my math is right I guess my psu is right for the hardware that I have Once again when I get home from school around at night I will post the version of my bios Thank you once again for all the help Ok I got the version of the bios It is A Ims V So I guess the version of the bios is v On the msi website there is a newer version the released on January th I have downloaded that version and I will be updating the bios I will post back when done updating the version to the Ok guys I have successfully updated the bios to the version after a big scare while updating I have also updated all the drivers via the last link that pat mcgroin gave it to me What is the next step Should I keep it running to see if it will freeze again I will do this until I hear back from you guys Thank you once again

http://www.techsupportforum.com/forums/f217/windows-7-64-bit-freezes-unknown-bugcheck-bugcheck-116-a-460530.html
Relevancy 50.31%

A new PC with the following configuration is randomly restarting on me as a result of a bugcheck error I've attached the dump file to this thread Asus x motherboard Intel core i - Ghz MB x GB G Kill Ripjaws V F - C D Samsung Pro MZ-V P BW GB SATA III M SSD Asus STRIX-GTX -DC OC- GD G GTX VGA Card Windows Pro bit The error in details 0x0000009f from has The was: The rebooted bugcheck bugcheck. computer a Log Name System Source Microsoft-Windows-WER-SystemErrorReporting Date PM Event ID Task Category None Level Error Keywords Classic User N A Computer Sandra-PC Description The computer has rebooted from a bugcheck The bugcheck was x f The computer has rebooted from a bugcheck. The bugcheck was: 0x0000009f x xffffe fccba xfffff b b xffffe f b A dump was saved in C WINDOWS MEMORY DMP Report Id bc bcd -d - b-b - b e feef The computer has rebooted from a bugcheck. The bugcheck was: 0x0000009f Event Xml lt Event xmlns quot http schemas microsoft com win events event quot gt lt System gt lt Provider Name quot Microsoft-Windows-WER-SystemErrorReporting quot Guid quot ABCE E -DE - - - FA C quot EventSourceName The computer has rebooted from a bugcheck. The bugcheck was: 0x0000009f quot BugCheck quot gt lt EventID Qualifiers quot quot gt lt EventID gt lt Version gt lt Version gt lt Level gt lt Level gt lt Task gt lt Task gt lt Opcode gt lt Opcode gt lt Keywords gt x lt Keywords gt lt TimeCreated SystemTime quot - - T Z quot gt lt EventRecordID gt lt EventRecordID gt lt Correlation gt lt Execution ProcessID quot quot ThreadID quot quot gt lt Channel gt System lt Channel gt lt Computer gt Sandra-PC lt Computer gt lt Security gt lt System gt lt EventData gt lt Data Name quot param quot gt x f x xffffe fccba xfffff b b xffffe f b lt Data gt lt Data Name quot param quot gt C WINDOWS MEMORY DMP lt Data gt lt Data Name quot param quot gt bc bcd -d - b-b - b e feef lt Data gt lt EventData gt lt Event gt

http://www.techsupportforum.com/forums/f338/the-computer-has-rebooted-from-a-bugcheck-the-bugcheck-was-0x0000009f-1106105.html
Relevancy 50.31%

My system rebooted from a bug check. Actual error is this -

The computer has rebooted from a bugcheck. The bugcheck was: 0x000000d1 (0x0000000000000000, 0x0000000000000002, 0x0000000000000008, 0x0000000000000000). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: e544d690-9776-4d42-a788-f1c75e8df899.

and this -

Problem signature
Problem Event Name: BlueScreen
Code: d1
Parameter 1: 0
Parameter 2: 2
Parameter 3: 8
Parameter 4: 0
OS version: 10_0_14393
Service Pack: 0_0
Product: 256_1
OS Version: 10.0.14393.2.0.0.256.48
Locale ID: 1033

Extra information about the problem
Bucket ID: AV_CODE_AV_NULL_IP_tcpip!__guard_dispatch_icall_fptr

My memory dump is here - https://drive.google.com/open?id=0By...Tl6V0xNNVAzQTA

Can someone help me figure this out? This is driving me nuts on a new install. What is causing my bluescreen?

Hardware is 6700k, 16gb ddr4 memory, asrock extreme4 motherboard with latest bios, 1080 ftw gtx board, intel nvme 600p ssd.

Thanks!

http://www.tenforums.com/bsod-crashes-debugging/62331-windows-10-pro-bsod-d1-bugcheck.html
Relevancy 50.31%

Hi,
I am hoping you guys can help me with this - we had a BSOD crash over the weekend.
The bugcheck error was: 0x1000007e (0xc0000005, 0xb954203c, 0xb8522bb0, 0xb85228ac)[/quote]

The forum won't let me attach the file Mini021515-01.dmp but if you tell me the correct way to do this I can upload that too.

Has anyone any ideas what could definitively cause this?

thanks
 

A:BSOD Crash on bugcheck

Go to C:|windows|minidump and select all the .dmp files. Right-click sending these files to a compressed(zipped)folder. Upload this folder as a file here...
 

http://www.techspot.com/community/topics/bsod-crash-on-bugcheck.208839/
Relevancy 50.31%

Hi There!

I have a i7 4770K with an Asus z87-Pro Motherboard, 3 x SSD in RAID 0 and 16GB Memory. GTX970 Video Card. I am having random BSOD's which have been persisting over quite some time.

I run 8.1 Pro x64 and the problems have persisted through an OS reload.

it usually happens when I am not home and when the computer should be "idle"

Any assistance greatly appreciated.

A:Random BSOD's BugCheck 124 - HAL.DLL

Update drivers in red and run Prime95 SmallFFT test. Hardware - Stress Test With Prime95 - Windows 7 Help Forums How do you cool it?

Code:
000.fcl Fri Sep 26 15:11:22 2008 (48DCDF7A)
CyberLink FCL Driver
http://www.carrona.org/drivers/driver.php?id=000.fcl

LGPBTDD.sys Wed Jul 1 20:47:52 2009 (4A4BAF58)
Logitech GamePanel Software
http://www.carrona.org/drivers/driver.php?id=LGPBTDD.sys

LGVirHid.sys Tue Nov 24 02:36:48 2009 (4B0B38B0)
Logitech Gamepanel Virtual HID Device Driver
http://www.carrona.org/drivers/driver.php?id=LGVirHid.sys

LGBusEnum.sys Tue Nov 24 02:36:48 2009 (4B0B38B0)
Logitech Keyboard
http://www.carrona.org/drivers/driver.php?id=LGBusEnum.sys

AsUpIO.sys Tue Aug 3 04:47:59 2010 (4C57835F)
ASUS hardware monitoring software related
http://www.carrona.org/drivers/driver.php?id=AsUpIO.sys

NTIOLib_X64.sys Wed Oct 20 08:45:49 2010 (4CBE901D)
MSI Afterburner driver (known BSOD issues with Windows) Also found to be a part of MSI Live Update 5[br][br]Recently (Nov 2014) there have been numerous instances of this driver in memory dumps. Analysis reveals that they are scattered throughout the filesystem by the installed MSI command utilities. For now I suggest uninstalling them all.
http://www.carrona.org/drivers/driver.php?id=NTIOLib_X64.sys

ASUSFILTER.sys Tue Sep 20 17:46:33 2011 (4E78B559)
ASUS USB Hub filter driver
http://www.carrona.org/drivers/driver.php?id=ASUSFILTER.sys

GEARAspiWDM.sys Thu May 3 21:56:17 2012 (4FA2E2E1)
CD-ROM Class Filter Driver by Gear Software.[br]Also comes with iTunes
http://www.carrona.org/drivers/driver.php?id=GEARAspiWDM.sys

AsIO.sys Wed Aug 22 11:54:47 2012 (5034AC67)
Asus PCProbe Utility
http://www.carrona.org/drivers/driver.php?id=AsIO.sys

btath_bus.sys Mon Jan 21 10:18:42 2013 (50FD07F2)
Atheros BlueTooth driver
http://www.carrona.org/drivers/driver.php?id=btath_bus.sys

sthid.sys Tue Feb 19 06:34:44 2013 (51230EF4)
Splashtop HID mini driver
http://www.carrona.org/drivers/driver.php?id=sthid.sys

npf.sys Fri Mar 1 02:31:24 2013 (513004EC)

npf.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

stcvsm.sys Mon Jun 10 22:05:39 2013 (51B63193)
StorageCraft driver
http://www.carrona.org/drivers/driver.php?id=stcvsm.sys

TeeDriverx64.sys Tue Jul 2 20:38:08 2013 (51D31E10)
Intel Management Engine Interface driver
http://www.carrona.org/drivers/driver.php?id=TeeDriverx64.sys

cmudaxp.sys Mon Jul 22 03:24:04 2013 (51EC89B4)
C-Media Audio Interface Driver (WDM) by C-Media [br] ASUS Xonar DG Audio Interface driver [br] HTO CLARO Audio Interface Driver
http://www.carrona.org/drivers/driver.php?id=cmudaxp.sys

intelppm.sys Thu Aug 22 10:46:35 2013 (5215CFEB)
Intel Processor driver
http://www.carrona.org/drivers/driver.php?id=intelppm.sys

athwbx.sys Thu Oct 17 11:46:01 2013 (525FB1D9)
Qualcomm Atheros AR9485WB-EG Wireless Network Adapter (Version: 10.0.0.274 is the first one after the release of Win8.1) [br] [br] Although I do not recommend drivers from places other than the manufacturer's website - this is the exception to that rule. Please scan with an anti-virus before opening any file that you download from the internet.[br][br]Also the driver for Qualcomm Atheros AR9002WB-1NG Wireless Network Adapter & likely others as well.
http://www.carrona.org/drivers/driver.php?id=athwbx.sys

asstor64.sys Mon Jan 27 10:30:34 2014 (52E6273A)
Asmedia ASM-106x Sata 6G controller
http://www.carrona.org/drivers/driver.php?id=asstor64.sys

rzpmgrk.sys Thu Apr 17 21:36:12 2014 (53502D2C)

rzpmgrk.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

iaStorA.sys Sat May 3 01:06:56 2014 (53642510)
Intel RST (Rapid Storage Technology) driver
http://www.carrona.org/drivers/driver.php?id=iaStorA.sys

dump_iaStorA.sys Sat May 3 ... Read more

http://www.eightforums.com/bsod-crashes-debugging/58200-random-bsods-bugcheck-124-hal-dll.html
Relevancy 50.31%

I have been getting the BSOD the past week.

Previously I got the BSOD that was caused by the GPU, I replace my GPU with a new one. But I am getting the BSOD again. Windows is saying it an unexpected error and PC checkup is saying it is a bugcheck problem

I regularly scan my PC for malware/virus
If my dump file is missing something, I'll dump it again
I appreciates any help.

A:BSOD, rebooting during bugcheck

Have you reinstalled windows after installing the new GPU?

http://www.sevenforums.com/bsod-help-support/278956-bsod-rebooting-during-bugcheck.html
Relevancy 50.31%

Hi Guys.

I have a new Windows 7 (Ultimate, 64 bit) PC,
and randomize BSOD.


Please tell me what should i do to fix the issue.

Additional information about the problem:

BugcheckCode 159
BugcheckParameter1 0x3
BugcheckParameter2 0xfffffa8004af2060
BugcheckParameter3 0xfffff80000b9c518
BugcheckParameter4 0xfffffa8007a1b7e0
SleepInProgress true
PowerButtonTimestamp 0

Minidump is attached in zip file.

A:One more BSOD: The bugcheck: 0x0000009f

Here's a link to the instructions for posting BSOD info: http://www.sevenforums.com/crashes-d...tructions.html

This BSOD looks like it's blaming your Rt64Win7.sys driver - a component of your network driver. I would suggest visiting the website of the manufacturer of your network card to download the latest Win7 drivers.
Once that's done, uninstall the current drivers and then install the freshly downloaded drivers. Then monitor for further BSOD's.

I would also suggest updating/removing these older drivers as they are known to cause BSOD issues on some Win7 systems:





Quote:

Code:

snapman.sys Fri Oct 06 09:43:53 2006 (45265D99) - Acronis True Image Snapshot Manager driver - http://www.carrona.org/dvrref.html#snapman.sys
ASACPI.sys Sun Mar 27 22:30:36 2005 (42476C4C) - Asus ATK0110 ACPI Utility driver - http://www.carrona.org/dvrref.html#ASACPI.sys




Here's the summary for the dump file analysis. Notice that there's no mention of the network driver. I've highlighted the mention of it (in RED) in the following full copy of the dump file analysis:
BSOD BUGCHECK SUMMARY

Code:

Built by: 7600.20765.amd64fre.win7_ldr.100726-2055
Debug session time: Tue Sep 28 17:19:55.183 2010 (UTC - 4:00)
System Uptime: 0 days 6:35:56.241
*** WARNING: Unable to verify timestamp for pci.sys
*** ERROR: Module load completed but symbols could not be loaded for pci.sys
Probably caused by : pci.sys
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
Bugcheck code 0000009F
Arguments 00000000`00000003 fffffa80`04af2060 fffff800`00b9c518 fffffa80`07a1b7e0
??????????????????????????????????????????????????????????????????????????????????????``

Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\FUBAR\_jcgriff2_\dbug\__Kernel__\092910-25396-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff800`00b9c500?
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.20765.amd64fre.win7_ldr.100726-2055
Machine Name:
Kernel base = 0xfffff800`02a49000 PsLoadedModuleList = 0xfffff800`02c7deb0
Debug session time: Tue Sep 28 17:19:55.183 2010 (UTC - 4:00)
System Uptime: 0 days 6:35:56.241
Loading Kernel Symbols
...............................................................
................................................................
.....................................
Loading User Symbols
Loading unloaded module list
...........
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa8004af2060, fffff80000b9c518, fffffa8007a1b7e0}

*** WARNING: Unable to verify timestamp for pci.sys
*** ERROR: Module load completed but symbols could not be loaded for pci.sys
Probably caused by : pci.sys

Followup: MachineOwner
---------

0: kd> !analyze -v;r;kv;lmtn;lmtsmn;.bugcheck;.logclose;q
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

DRIVER_POWER_STATE_FAILURE (9f)
A dri... Read more

http://www.sevenforums.com/bsod-help-support/114428-one-more-bsod-bugcheck-0x0000009f.html
Relevancy 50.31%

My laptop has Windows 10 64-bit with Anniversary Update. My computer/laptop keeps crashing randomly and when I go to "Event Viewer", it always comes up with bugcheck on each crash... Is there anything I can do to fix this? Thoughts and help GREATLY appreciated

Here is latest Crash Info:

The computer has rebooted from a bugcheck. The bugcheck was: 0x000000c2 (0x0000000000000007, 0x000000004f4e5749, 0x00000000040a0000, 0xffffcc87c0638010). A dump was saved in: C:\WINDOWS\MEMORY.DMP. Report Id: c349c1a7-9ad7-4093-942d-467fde0a8dde.

Update: Both Chkdsk and Windows Memory Diagnostic came up with no errors.

http://www.tenforums.com/bsod-crashes-debugging/64000-bugcheck-crashes-no-bsod.html
Relevancy 50.31%

Hello. I build a custom PC a month ago. From the beggining I recieve random BSOD with 5-6 codes.

Windows 7 Ultimate 64bit SP1
Intel Core i5-4440
Asus H81M-K
4GB DDR3 1600MHz
Toshiba 500GB 7200/32MB
Fortron 450W

A:Random BSOD Bugcheck 24

Just had another one with error f4. Here is the updated bugcheck.

http://www.sevenforums.com/bsod-help-support/339185-random-bsod-bugcheck-24-a.html
Relevancy 50.31%

Hi to all and thank you for creating this forum; I have been recently noticing that my computer sometimes hangs up with a blank screen when the windows 10 login screen is supposed to load. I am forced to press the reset button in order to eventually log on.
I have then noticed through event viewer a bugcheck warning. I have been trying to find what the cause or issue might be but I have not had any luck. I am attaching a report as per forum rules in case anyone might be able to shed some light into this issue.
Many thanks for any help.

A:BSOD Bugcheck 0x0000003b

I don't know what is on your system, but I do know some of it is against the rules.
Please cleanup your system of cracks/bypasses + related software, no crack/bypass and related software may be on your system to proceed.

Forum rules





4) No piracy or discussion of piracy allowed at all. Such as software, music, videos and other intellectual property violations (e.g. downloading youtube videos locally etc).

http://www.tenforums.com/bsod-crashes-debugging/34451-bsod-bugcheck-0x0000003b.html
Relevancy 50.31%

Hi - We are finding multiple machines (setup identically) with BSOD appearing at different sites, whilst running out own application, need some help with interpreting the dump files which are attached, if anyone can point us in the right direction?

Tried using different brand machines but same error occurs, though this is limited to Windows 7, XP did not suffer this issue.

Thanks again for your help - Sam

A:Regular BSOD on BugCheck 44

Recommendations:The system is missing the PCI Express drivers.Desktop and Workstation Support - Fujitsu America
Crashes are due to srv2.sys:Operating system intermittently crashes with a "0x0000007E" Stop error message on a computer that is running Windows 7 or Windows Server 2008 R2
Symantec software is six years old:awechomd.sys Mon Feb 19 03:35:10 2007 (45D97D5E)
Symantec pcAnywhere Video Miniport Driver
http://www.carrona.org/drivers/driver.php?id=awechomd.sys

aw_host5.sys Mon Feb 19 03:35:33 2007 (45D97D75)
Symantec pcAnywhere Host driver
http://www.carrona.org/drivers/driver.php?id=aw_host5.sys


3rd Party Drivers: The following is for information purposes only. My recommendations were given above. The drivers that follow belong to software or devices that were not developed by Microsoft. Any drivers in red should be updated/replaced/removed. You can find links to the driver information and where to update the drivers in the section after the code box:

Code:
**************************Mon Mar 25 15:49:29.361 2013 (UTC - 6:00)**************************
awechomd.sys Mon Feb 19 03:35:10 2007 (45D97D5E)
aw_host5.sys Mon Feb 19 03:35:33 2007 (45D97D75)
intelppm.sys Mon Jul 13 17:19:25 2009 (4A5BC0FD)
amdxata.sys Fri Mar 19 10:18:18 2010 (4BA3A3CA)
RTKVHD64.sys Wed Dec 29 20:52:42 2010 (4D1C020A)
iaStor.sys Tue Nov 29 20:39:19 2011 (4ED5A567)
IntcDAud.sys Tue Dec 6 04:23:07 2011 (4EDDFB1B)
Rt64win7.sys Wed Apr 11 10:29:16 2012 (4F85B15C)
igdkmd64.sys Wed Dec 12 17:42:26 2012 (50C92472)

http://www.carrona.org/drivers/driver.php?id=awechomd.sys
http://www.carrona.org/drivers/driver.php?id=aw_host5.sys
http://www.carrona.org/drivers/driver.php?id=intelppm.sys
http://www.carrona.org/drivers/driver.php?id=amdxata.sys
http://www.carrona.org/drivers/driver.php?id=RTKVHD64.sys
http://www.carrona.org/drivers/driver.php?id=iaStor.sys
http://www.carrona.org/drivers/driver.php?id=IntcDAud.sys
http://www.carrona.org/drivers/driver.php?id=Rt64win7.sys
http://www.carrona.org/drivers/driver.php?id=igdkmd64.sys


Analysis: The following is for information purposes only. The following information contains the relevant information from the blue screen analysis:

Code:
**************************Mon Mar 25 15:49:29.361 2013 (UTC - 6:00)**************************
Loading Dump File [G:\BSODDmpFiles\2013_03_26\2sam2\032513-12526-01.dmp]
Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 procs) Free x64
Built by: 7601.18044.amd64fre.win7sp1_gdr.130104-1431
System Uptime:0 days 5:47:40.532
*** ERROR: Module load completed but symbols could not be loaded for srv2.sys
Probably caused by :srv2.sys ( srv2+120ec )
BugCheck 44, {fffffa8003696010, 1d7b, 0, 0}
BugCheck Info: MULTIPLE_IRP_COMPLETE_REQUESTS (44)
Arguments:
Arg1: fffffa8003696010, Address of the IRP
Arg2: 0000000000001d7b
Arg3: 0000000000000000
Arg4: 0000000000000000
BUGCHECK_STR: 0x44
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0x44_srv2+120ec
CPUID: "Intel(R) Pentium(R) CPU G645 @ 2.90GHz"
MaxSpeed: 2900
CurrentSpeed: 2893
BIOS Version V4.6.5.3 R1.23.0 for D2990-A3x
BIOS Release Date 01/17/2013
Manufacturer FUJITSU
Product Name ESPRIMO P400
??????????????????????????????????????????????????????????????????????????????????????``
**************************Mon Mar 25 10:01:25.707 2013 (UTC - 6:00)**************************
Loading Dump File [G:\BSODDmpFiles\2013_03_26\2sam2\032513-12901-01.dmp]
Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 procs) Free x64
Built by: 7601.18044.amd64fre.win7sp1_gdr.130104-1431
System Uptime:0 days 8:02:43.878
*** ERROR: Module load completed but symbols could not be load... Read more

http://www.techsupportforum.com/forums/f299/regular-bsod-on-bugcheck-44-a-690908.html
Relevancy 50.31%

I'm having issue that has been going for several months now. Every time the machine comes out of Sleep after a long period of time it will BSOD. Screen stays black and I have to power off the machine. I will have a BSOD warning when I get it back up. I've updated as many drivers that I can find currently and will keep looking for more. Any help would be really appreciated. I've ran the Diag tool and attached all the file below.

Thanks

A:BSOD on Wake Up. BugCheck 7F

Same error this morning when I woke it up this morning. When it happens the screen never wakes up, but I can see the drives running and then it restarts after the BSOD. Is there any more information I can provide for this?

http://www.sevenforums.com/bsod-help-support/317821-bsod-wake-up-bugcheck-7f.html
Relevancy 50.31%

i bought this custom pc off a mate of mine so i only know a little about and where too find bugcheck BSOD kernel 41 278 the correct information i am getting constant bsod but with the blue screen instant restarts screen turns off then the computer restarts i can still see my logitech display on my keyboard running for about seconds after screen is black then computer restarts i BSOD kernel 41 bugcheck 278 was getting this problem when i first got the pc but it has gotten too the stage where yesterday i was crashing upon load in so i reset the mother board in a attempt too even get too the load screen thinking maybe something has gone wrong but i can only look at web pages now if i load any of my games this is what happens call of duty black ops- several ways it crashed are loaded game up and actually went INTO game upon loading the game map i see the map name on the left side of screen and then the map picture appears and then crash i have also run about meters int he game and crashed as well it is SO random i cannot figure it out i started with water cooled GTX 's now i am down too one in an attempt too figure this out UPON taking out cards the system ran fine no hiccups nothing i thought i was king dick of the cheese factory i went too bed woke up the next day and turned on the pc and could not even load into windows i have gotten toot his put of just loading into games now i crash upon loading full screen of msi afterburner i crash upon furbench the system is fully water cooled except for the ram and not over clocked i have seen it hit but the house was degrees it has been very strange with the working and then not working and it is starting too wear me thin too the put i want too put my size boot through the mother board and kick my cooling system on the other side currently debating on buying a titan and hoping it fixes this problem i will post as much info as i can i am not a genius i am a gamer i blow stuff up not put it together thankyou Adrian

A:BSOD kernel 41 bugcheck 278

my mate that built the pc bought it i have the case and everything why is that?

if the files look weird i did download and pay for a program as a last resort too attempt too repair the kernel problem a noobish idea i know cost me $50 but i have been dealing with this problem for ages.
the problem is called errorEND

http://www.sevenforums.com/bsod-help-support/305782-bsod-kernel-41-bugcheck-278-a.html
Relevancy 50.31%

My new(Built in November) computer has had issues with stability since the first week it was built. At first the offending application was the mom.exe Catalyst Control Center monitoring app, but it has since been removed and I am still getting blue screens. I have attached a zip file that I created with the tool from this site. Any help tracking down the specific issue would be greatly appreciated.

A:Random BSOD, bugcheck.

Hello Rob,

Please read the instructions here: Blue Screen of Death (BSOD) Posting Instructions, and post back with the needed information. One of our BSOD experts should be by later when able to further help.

http://www.sevenforums.com/bsod-help-support/324204-random-bsod-bugcheck.html
Relevancy 50.31%

sorry i am very new to this and my computer has been acting up crashing on boot up when i open games and ive looked it up b but only similar situations comes up frmo windows vista bit i have windows bit anyhow here is the even viewer logs ELECT FROM InstanceModificationEvent WITHIN WHERE TargetInstance ISA quot Win Processor bugcheck error and BSOD quot AND TargetInstance LoadPercentage gt x also says the computer has BSOD and bugcheck error rebooted from a bug check and gives me this but not always this its both back n forth Data Name quot param quot gt x x xfffffa f d x xffffffffffffffff lt and the nd bug check it error im given is this x a x eef x x xfffff d ed A dump was saved in C Windows MEMORY DMP Report Id Event Xml also i have been given this error too x e computer specs are as such CPU AMD Phenom II X Mainboard BIOSTAR Group TA GXB A AMD GX Memory DDR MBytes DDR Kingston G-UDIMM Graphic NVIDIA GeForce GTX the games i play is HON and MW i also managed to get some DMP files andi uploaded them to sendspace if that helps at all Lol i cant put a link up thanks in advance guys i really appreciate the help nbsp

A:BSOD and bugcheck error

See if you can figure out how to post minidumps from this:
http://www.techspot.com/vb/topic51365.html
 

http://www.techspot.com/community/topics/bsod-and-bugcheck-error.175382/
Relevancy 50.31%

Hello Guys I'm BSOD 0x124_GenuineIntel BugCheck seeking help for a Win BSOD It started about a month ago first time during gaming The game displayed artifacts and BSOD BugCheck 0x124_GenuineIntel froze After a reboot none of the games installed would run I was running Win BSOD BugCheck 0x124_GenuineIntel Home Premium bit and Win XP bit BSOD BugCheck 0x124_GenuineIntel SP Problem occured in both OS System Windows Home Premium bit full retail CPU Intel Core DuoE GHz GFX Sapphire Radeon Mobo Asus P KPL Memory OCZ Reaper PC- GB Dual Channel Power Suppy Modecom Feel Watt I formated the HDD performed a clean install of Win bit Home Premium As long as there is no display driver installed the computer is fully operable As soon as I download ATI display drivers install them reboot and run a game or any other application that needs more resources Photoshop PowerDVD Lightroom etc system freezes After a reboot info about sever error is displayed I tested RAM with memtest and Windows Memory Diagnostic In Memtest One of the sticks produces an error despite memory bank it used so it has been removed However it didn't solve the problem I checked HDD with HD Tune SMARTis OK and MHDD no errors bad secotrs etc Using OCCT I performed an hour long CPU stress test - no errors or BSOD -Using OCCT I performed a GPU stress test - system froze after a couple of minnutes When the BSOD occured for the first time I had been using ASUS Radeon X Pro whin was replaced with mentioned above I swapped the momory hdd power supply and GPU twice each time installing Win from a scratch BSOD still persists Using WinDBG I gathered following info WHEA UNCORRECTABLE ERROR A fatal hardware error has occurred Parameter identifies the type of error source that reported the error Parameter holds the address of the WHEA ERROR RECORD structure that describes the error conditon Arguments Arg Machine Check Exception Arg fffffa a Address of the WHEA ERROR RECORD structure Arg High order -bits of the MCi STATUS value Arg Low order -bits of the MCi STATUS value Debugging Details ------------------ BUGCHECK STR x GenuineIntel CUSTOMER CRASH COUNT DEFAULT BUCKET ID VISTA DRIVER FAULT PROCESS NAME System CURRENT IRQL STACK TEXT fffff fb f fffff a fffffa a fffffa d ff nt WheapCreateLiveTriageDump x c fffff fb c fffff ff a fffffa a fffff c f fffffa d fffff a db e nt WheapCreateTriageDumpFromPreviousSession x fffff fb c fffff f bb fffff ce fffff fffffa d nt WheapProcessWorkQueueItem x fffff fb c fffff ed fffff f fffff f bb fffffa d nt WheapWorkQueueWorkerRoutine x fffff fb cb fffff ca fffffa d fffffa c f nt ExpWorkerThread x fffff fb d fffff ea b fffff e fffffa d fffff f f nt PspSystemThreadStartup x a fffff fb d fffff fba fffff fb fffff fb c nt KxStartSystemThread x STACK COMMAND kb FOLLOWUP NAME MachineOwner MODULE NAME hardware IMAGE NAME hardware DEBUG FLR IMAGE TIMESTAMP FAILURE BUCKET ID X x GenuineIntel PROCESSOR BUS PRV BUCKET ID X x GenuineIntel PROCESSOR BUS PRV Followup MachineOwner --------- kd gt lmvm hardware start end module name Mini Kernel Dump does not contain unloaded driver list Could you please help me with that problem Thanks inadvance

A:BSOD BugCheck 0x124_GenuineIntel

Hi -

The bugchecks on all 6 dumps are the same -

0x124 = WHEA = Windows Hardware Error Architecture = unknown hardware failure

Info on 0x124 --> http://www.sevenforums.com/crash-loc...-what-try.html


The WHEA Record -

Code:

fffffa80`0297a038
===============================================================================
Common Platform Error Record @ fffffa800297a038
-------------------------------------------------------------------------------
Record Id : 01cb30151792a8c9
Severity : Fatal (1)
Length : 928
Creator : Microsoft
Notify Type : Machine Check Exception
Timestamp : 7/30/2010 18:29:11
Flags : 0x00000002 PreviousError

===============================================================================
Section 0 : Processor Generic
-------------------------------------------------------------------------------
Descriptor @ fffffa800297a0b8
Section @ fffffa800297a190
Offset : 344
Length : 192
Flags : 0x00000001 Primary
Severity : Fatal

Proc. Type : x86/x64
Instr. Set : x64
Error Type : BUS error
Operation : Generic
Flags : 0x00
Level : 0
CPU Version : 0x00000000000006f2
Processor ID : 0x0000000000000000

===============================================================================
Section 1 : x86/x64 Processor Specific
-------------------------------------------------------------------------------
Descriptor @ fffffa800297a100
Section @ fffffa800297a250
Offset : 536
Length : 128
Flags : 0x00000000
Severity : Fatal

Local APIC Id : 0x0000000000000000
CPU Id : f2 06 00 00 00 08 02 00 - bd e3 00 00 ff fb eb bf
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00

Proc. Info 0 @ fffffa800297a250

===============================================================================
Section 2 : x86/x64 MCA
-------------------------------------------------------------------------------
Descriptor @ fffffa800297a148
Section @ fffffa800297a2d0
Offset : 664
Length : 264
Flags : 0x00000000
Severity : Fatal

Error : BUSL0_SRC_ERR_M_NOTIMEOUT_ERR (Proc 0 Bank 0)
Status : 0xf200004000000800

There are 48 of these errors in the logs -

Code:

Event[5854]:
Log Name: System
Source: Disk
Date: 2010-07-03T15:02:04.031
Level: Error
Description:
The device, \Device\Harddisk0\DR0, has a bad block.


The system files show a single SAMSUNG HD103SJ 1 TB, yet there are 7 NTFS patitions. NTFS permits 4 per HDD -

Code:
Drive C:
Description Local Fixed Disk
Compressed No
File System NTFS
Size 49,90 GB (53*582*229*504 bytes)
Free Space 27,84 GB (29*894*496*256 bytes)
Volume Name
Volume Serial Number 4485BA5F

Drive D:
Description CD-ROM Disc

Drive E:
Description Local Fixed Disk
Compressed No
File System NTFS
Size 10,00 GB (10*737*414*144 bytes)
Free Space 9,70 GB (10*413*817*856 bytes)
Volume Name Programy
Volume Serial Number 58762DE4

Drive F:
Description Local Fixed Disk
Compressed No
File System NTFS
Size 6,00 GB (6*442*446*848 bytes)
Free Space 1,94 GB (2*085*945*344 bytes)
Volume Name Swap
Volume Serial Number 0E912CB1

Drive G:
Description Local Fixed Disk
Compressed No
File System NTFS
Size 200,00 GB (214*748*360*704 bytes)
Free Space 164,37 GB (176*486*313*984 bytes)
Volume Name Gry
Volume Serial Number 6CC01495

Drive H:
Description Local Fixed Disk
Compressed No
File System NTFS
Size 200,00 GB (214*748*360*704 bytes)
Free Space 156,48 GB (168*017*481*728 bytes)
Volume Name Muzyka i filmy
Volume Serial Number D4D0CC1A

Drive I:
Description Local Fixed Disk
Compressed No
File System NTFS
Size 460,00 GB (493*921*234*944 bytes)
Free Space 452,15 GB (485*489*291*264 bytes)
Volum... Read more

http://www.techsupportforum.com/forums/f299/bsod-bugcheck-0x124_genuineintel-502454.html
Relevancy 50.31%

Hi guys

This is a different error than the one I had before. I can't find any info on what it might be, so any help is really appreciated.

thanks
Cyla

A:BSOD The bugcheck was: 0x00000257

  
Quote: Originally Posted by cyla


Hi guys

This is a different error than the one I had before. I can't find any info on what it might be, so any help is really appreciated.

thanks
Cyla



Hi Cyla and welcome

This crash was probalby caused by one of the following.

Usual causes: Device driver, BIOS bug, hardware defect (see Significant Posts section below)
I would
run a system file check (type cmd in search>right click and run as admin>sfc /scannow)

Update BIOS

Let us know the results
Ken

Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\K\Desktop\030910-23906-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*d:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0xfffff800`02c4f000 PsLoadedModuleList = 0xfffff800`02e8ce50
Debug session time: Mon Mar 8 19:00:50.890 2010 (GMT-5)
System Uptime: 10 days 1:21:54.937
Loading Kernel Symbols
...............................................................
................................................................
................................
Loading User Symbols
Loading unloaded module list
............
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 101, {18, 0, fffff880009b2180, 4}

Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

CLOCK_WATCHDOG_TIMEOUT (101)
An expected clock interrupt was not received on a secondary processor in an
MP system within the allocated interval. This indicates that the specified
processor is hung and not processing interrupts.
Arguments:
Arg1: 0000000000000018, Clock interrupt time out interval in nominal clock ticks.
Arg2: 0000000000000000, 0.
Arg3: fffff880009b2180, The PRCB address of the hung processor.
Arg4: 0000000000000004, 0.

Debugging Details:
------------------
BUGCHECK_STR: CLOCK_WATCHDOG_TIMEOUT_8_PROC

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

PROCESS_NAME: System

CURRENT_IRQL: d

STACK_TEXT:
fffff880`0333f528 fffff800`02c6d443 : 00000000`00000101 00000000`00000018 00000000`00000000 fffff880`009b2180 : nt!KeBugCheckEx
fffff880`0333f530 fffff800`02cc95f7 : fffffa80`00000000 fffff800`00000004 00000000`0002625a fffff880`00d8223f : nt! ?? ::FNODOBFM::`string'+0x4e3e
fffff880`0333f5c0 fffff800`02c1a090 : 00000000`00000000 fffff880`0333f770 fffff800`02c35460 fffff800`00000000 : nt!KeUpdateSystemTime+0x377
fffff880`0333f6c0 fffff800`02cbd3f3 : 00000000`5b66be1b fffff800`02c35460 fffff800`02e39e80 00000000`00000001 : hal!HalpRtcClockInterrupt+0x130
fffff880`0333f6f0 fffff800`02ccee06 : 00000000`00000000 00000000`00000001 00000000`00000000 fffff880`00000000 : nt!KiInterruptDispatchNoLock+0x163
fffff880`0333f880 fffff800`02cb016c : fffffa80`04479a20 00000000`00000000 00000000`00000000 fffff880`0333faa8 : nt!KeFlushM... Read more

http://www.sevenforums.com/bsod-help-support/69604-bsod-bugcheck-0x00000257.html
Relevancy 50.31%

Hi guys I have a new windows 7 computer and I had my first bsod with the following bugcheck.

The computer has rebooted from a bugcheck. The bugcheck was: 0x00000116 (0xfffffa800679b4e0, 0xfffff880048ec220, 0x0000000000000000, 0x0000000000000002). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 012210-38859-01.

I have attached the memory.dmp Since then I have had two more BSOD with the following info, but they have not been recorded in the memory.dmp.

The computer has rebooted from a bugcheck. The bugcheck was: 0x00000101 (0x0000000000000018, 0x0000000000000000, 0xfffff88003115180, 0x0000000000000006). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: .

I have changed the settings to a small memory dump instead of the kernel one, in the hope that it will save a dump the next time, but if anyone can help me out with this I would be grateful!

thanks C

A:BSOD The bugcheck was: 0x00000116

  
Quote: Originally Posted by cyla


Hi guys I have a new windows 7 computer and I had my first bsod with the following bugcheck.

The computer has rebooted from a bugcheck. The bugcheck was: 0x00000116 (0xfffffa800679b4e0, 0xfffff880048ec220, 0x0000000000000000, 0x0000000000000002). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 012210-38859-01.

I have attached the memory.dmp Since then I have had two more BSOD with the following info, but they have not been recorded in the memory.dmp.

The computer has rebooted from a bugcheck. The bugcheck was: 0x00000101 (0x0000000000000018, 0x0000000000000000, 0xfffff88003115180, 0x0000000000000006). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: .

I have changed the settings to a small memory dump instead of the kernel one, in the hope that it will save a dump the next time, but if anyone can help me out with this I would be grateful!

thanks C


HI C

this crash was caused by your video driver.

you should
downlaod afresh copy and install it
run a system sile check
type cmd in search>right click and run as admin>sfc /scannow

Ken


Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\K\Desktop\012210-38859-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*d:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0xfffff800`02c19000 PsLoadedModuleList = 0xfffff800`02e56e50
Debug session time: Fri Jan 22 03:11:29.842 2010 (GMT-5)
System Uptime: 0 days 23:11:48.889
Loading Kernel Symbols
...............................................................
................................................................
..............................
Loading User Symbols
Loading unloaded module list
.....
Unable to load image \SystemRoot\System32\drivers\dxgkrnl.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for dxgkrnl.sys
*** ERROR: Module load completed but symbols could not be loaded for dxgkrnl.sys
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 116, {fffffa800679b4e0, fffff880048ec220, 0, 2}

Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+e7220 )

Followup: MachineOwner
---------

6: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

VIDEO_TDR_FAILURE (116)
Attempt to reset the display driver and recover from timeout failed.
Arguments:
Arg1: fffffa800679b4e0, Optional pointer to internal TDR recovery context (TDR_RECOVERY_CONTEXT).
Arg2: fffff880048ec220, The pointer into responsible device driver module (e.g. owner tag).
Arg3: 0000000000000000, Optional error code (NTSTATUS) of the last failed operation.
Arg4: 0000000000000002, Optional internal context depe... Read more

http://www.sevenforums.com/bsod-help-support/62903-bsod-bugcheck-0x00000116.html
Relevancy 50.31%

This error came up last night at initial boot. I believe this may have happened a few times, but I can't be sure (sometimes when I start my computer I walk away).

The computer has rebooted from a bugcheck. The bugcheck was: 0x00000024 (0x00000000001904fb, 0xfffff88003185878, 0xfffff880031850d0, 0xfffff88001319b13). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 062913-23602-01.

I did a search and came up with your forums so I downloaded the SF diagnostic tool and ran it. I have the zip attached.

My computer still runs fine, except that it just restarts at start-up sometimes with a BSOD.

Any fixes would be greatly appreciated.

Please move post to BSOD Help and Support

A:BSOD bugcheck 0x00000024

It is a stop 0x24; which is a Ntfs file system error. It may occur for various reasons like a failing HDD, failing storage controllers and cables, the file system monitoring drivers of an antivirus, or a virus.

Form your crash dumps, I got the failing modules are ...

avast! Virtualization Driver

Code:
fffff880`02911310 fffff880`03fbbcf1*** WARNING: Unable to verify timestamp for aswSnx.SYS
*** ERROR: Module load completed but symbols could not be loaded for aswSnx.SYS
aswSnx+0xf0cf1
Description here: Driver Reference Table - aswSnx.SYS

COMODO Firewall Pro Sandbox Driver

Code:
fffff880`02910af8 fffff880`03e0d371Unable to load image \SystemRoot\System32\DRIVERS\cmdguard.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for cmdguard.sys
*** ERROR: Module load completed but symbols could not be loaded for cmdguard.sys
cmdguard+0xd371
Description here: Driver Reference Table - cmdguard.sys

Uninstall Avast. Uninstall Comodo, too. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.
Download, install and update those, and then run full system scans with both of them, one by one.

Now, you need to pay attention to this one ....

Drive C:Size 97.66 GB (104,857,595,904 bytes)Free Space 2.79 GB (2,997,383,168 bytes)
That's extremely low. No doubt that the storage will fail. Salvage some space. At first, disable hibernate. it will salvage a good space. Hibernate - Enable or Disable

Next, follow this guide: Hard Disk Space - Free Up and Recover

Let us know the situation when it is at least 12-15 GBS free.
_________________________________________________________________________
BSOD ANALYSIS:

Code:
......
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 24, {1904fb, fffff88003185878, fffff880031850d0, fffff88001319b13}

Probably caused by : Ntfs.sys ( Ntfs!NtfsPerformVerify+23 )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

NTFS_FILE_SYSTEM (24)
If you see NtfsExceptionFilter on the stack then the 2nd and 3rd
parameters are the exception record and context record. Do a .cxr
on the 3rd parameter and then kb to obtain a more informative stack
trace.
Arguments:
Arg1: 00000000001904fb
Arg2: fffff88003185878
Arg3: fffff880031850d0
Arg4: fffff88001319b13

Debugging Details:
------------------
EXCEPTION_RECORD: fffff88003185878 -- (.exr 0xfffff88003185878)
ExceptionAddress: fffff88001319b13 (Ntfs!NtfsPerformVerify+0x0000000000000023)
ExceptionCode: c0000005 (Access violation)
ExceptionFlags: 00000000
NumberParameters: 2
Parameter[0]: 0000000000000000
Parameter[1]: 00000000000000b8
Attempt to read from address 00000000000000b8

CONTEXT: fffff880031850d0 -- (.cxr 0xfffff880031850d0)
rax=fffff88003185ae8 rbx=0000000000000000 rcx=fffffa8009080010
rdx=0000000000000000 rsi=0000000000000000 rdi=fffffa8009080010
rip=fffff88001319b13 rsp=fffff88003185ab0 rbp=fffff80003680280
r8=00000000ffffffff r9=0000000000000727 r10=fffff88001265700
r11=fffff8a001328140 r12=fffff88001267000 r13=0000000000000000
r14=fffff88003185c48 r15=0000000000000000
iopl=0 nv up ei pl zr na po nc
cs=001... Read more

http://www.sevenforums.com/bsod-help-support/295738-bsod-bugcheck-0x00000024.html
Relevancy 50.31%

Hello everyone I've just built a new computer about a week ago and have BugCheck Far 116 Cry 4, BSOD playing been having BSOD issues that I can't fix My hardware specs are as follows CPU Intel i K GPU MSI GeForce GTX Ti SSD Intel BSOD playing Far Cry 4, BugCheck 116 Series GB x Mobo MSI X A SLI Plus LGA -v RAM Corsair Vengeance LPX GB I carried over one SSD from my previous computer and added a second new one After having problems with BSOD I did a fresh Windows install Windows x but the BSODs continued The error message I'm getting is BugCheck GRAPHICS DRIVER TDR FAULT Thinking my problem was the driver I uninstalled my GPU driver and ran a rd party program in Safe Mode to remove all traces of it I downloaded the latest driver from NVidia's site and kept getting the same BSOD I only seem to get them when I'm gaming and only when playing Far Cry I've played World of Warcraft and War Thunder with no problems I've checked CPU temperatures and they are normal I don't have anything to test my GPU temp but both fans are running on it and I don't suspect that to be the problem I ran Windows Memory Diagnostic to test my RAM and that came back with no negative results I have the latest drivers on all other hardware and software including Windows updates current version is Service Pack I am not overclocking and I am running monitors I will post the Windows Debugger results below Please help thank you Microsoft R Windows Debugger Version AMD Copyright c Microsoft Corporation All rights reserved Loading Dump File C Windows Minidump - - dmp Mini Kernel Dump File Only registers and stack trace are available Symbol Path validation summary Response Time ms Location Deferred srv c symbols http msdl microsoft com download symbols Symbol search path is srv c symbols http msdl microsoft com download symbols Executable search path is Windows Kernel Version Service Pack MP procs Free x Product WinNt suite TerminalServer SingleUserTS Built by amd fre win sp gdr - Machine Name Kernel base xfffff c PsLoadedModuleList xfffff e d Debug session time Fri Sep UTC - System Uptime days Loading Kernel Symbols Press ctrl-c cdb kd ntsd or ctrl-break windbg to abort symbol loads that take too long Run sym noisy before reload to track down problems loading symbols Loading User Symbols Loading unloaded module list Bugcheck Analysis Use analyze -v to get detailed debugging information BugCheck fffffa f e fffff ddc ffffffffc a WARNING Unable to verify timestamp for nvlddmkm sys ERROR Module load completed but symbols could not be loaded for nvlddmkm sys Probably caused by nvlddmkm sys nvlddmkm fc Followup MachineOwner --------- kd gt analyze -v Bugcheck Analysis VIDEO TDR FAILURE Attempt to reset the display driver and recover from timeout failed Arguments Arg fffffa f e Optional pointer to internal TDR recovery context TDR RECOVERY CONTEXT Arg fffff ddc The pointer into responsible device driver module e g owner tag Arg ffffffffc a Optional error code NTSTATUS of the last failed operation Arg Optional internal context dependent data Debugging Details ------------------ FAULTING IP nvlddmkm fc fffff ddc ff d eaff jmp qword ptr nvlddmkm x f fffff f DEFAULT BUCKET ID GRAPHICS DRIVER TDR FAULT CUSTOMER CRASH COUNT BUGCHECK STR x PROCESS NAME System CURRENT IRQL ANALYSIS VERSION debuggers dbg - amd fre STACK TEXT fffff b fa fffff fffffa f e fffff ddc ffffffff c a nt KeBugCheckEx fffff b fa fffff fffff ddc fffffa e ffffffff c a dxgkrnl TdrBugcheckOnTimeout xec fffff b fa fffff f fffffa ffffd fffffa f e dxgkrnl DXGADAPTER Reset x a fffff b fb fffff d fffffa a d fffffa e dxgkrnl TdrResetFromTimeout x fffff b fbc fffff f e e a fffffa e c b fffffa a d fffffa e c b dxgmms VidSchiWorkerThread x fffff b fc fffff cbaf fffff fffffa e c b fffff d c d f f d nt PspSystemThreadStartup x a fffff b fc nt KxStartSystemThread x STACK COMMAND bugcheck kb FOLLOWUP IP nvlddmkm fc fffff ddc ff d eaff jmp qword ptr nvlddmkm x f fffff f SYMBOL NAME nvlddmkm fc FOLLOWUP NAME MachineOwner MODUL... Read more

A:BSOD playing Far Cry 4, BugCheck 116

I would firstly check your operating temps, you can use Speccy or HWinfo to see all the details you need

If temps seem ok try a different driver, if you have the latest try uninstalling it and using an older one just make sure its WHQL and not a beta, when uninstalling run Drivers - Clean Left over Files after Uninstalling to clean out any left overs and when installing only install the basic driver package.

If this doesn't work I would try running furmark to see if your gfx is functioning correctly and this will also give you an idea of gfx temps as this will stress test your gfx card

This covers the basics post back with your findings and a screenshot of furmark if you run it ?

ps don't leave furmark unattended and watch those temps if your gfx run too hot furmark will cook your card

http://www.sevenforums.com/bsod-help-support/381674-bsod-playing-far-cry-4-bugcheck-116-a.html
Relevancy 50.31%

I have several bsod with my win7 prof. system with bug check code 109 when the os perform srv.sys as announcement of win7 when performed by F8 key menu in record latest file before failure. please give me solution.

A:win7 BSOD bugcheck 109 srv.sys

Hi and welcome to TSF this is about your error code Bug Check 0x109: CRITICAL_STRUCTURE_CORRUPTION (Windows Debuggers)
im order to help you further with this issue please follow the instructions here if possible http://www.techsupportforum.com/foru...ta-452654.html

http://www.techsupportforum.com/forums/f217/win7-bsod-bugcheck-109-srv-sys-692536.html
Relevancy 50.31%

Hi Guys This is my first entry to this forum upon which I stumbled by pure incident My PC purely used as Audio Workstation worked very fine and suddenly started to BSOD when getting into power save mode e g when I - LIST_ENTRY_CORRUPT BugCheck 139 - BSOD was away for some minutes The installation was a fresh Win bit Pro setup as the PC has only been bought a couple of months ago In fact I'm already looking for many days to find some kind of solution BSOD - BugCheck 139 - LIST_ENTRY_CORRUPT indicator for my BSOD problem and I've tried many different things but none helped coming back to a previous restore point scf scannow modifying the power management plan sleep standby screensaver Checking the dumps BSOD - BugCheck 139 - LIST_ENTRY_CORRUPT with WinDbg deactivated wake on Lan installing new driver version using Driver Reviver cleaning and repairing the registry with PC Reviver Dism Online Cleanup-Image ScanHealth amp amp Dism Online Cleanup-Image CheckHealth amp amp Dism Online Cleanup-Image RestoreHealth I simply do not know what else to do and starting really getting pissed as I spend way more time trying fixing amp maintaining the Audio Workstation rather than making music Honestly I even thought of selling the whole thing and going to the dark side by using a Mac Any help will be much appreciated Cheers Armand

A:BSOD - BugCheck 139 - LIST_ENTRY_CORRUPT

50 dumps only today. Oh, dear.
Please update drivers in red or uninstall the software related to them. Please uninstall McAffee for the time we are troubleshooting.
http://download.mcafee.com/products/...tches/MCPR.exe


Code:
ubumapi.sys Thu Jul 26 09:49:45 2007 (46A85219)
Unibrain S.A. ubCore? User Mode API Support driver[br] [br]Firewire 800 (1394b)[br]
http://www.carrona.org/drivers/driver.php?id=ubumapi.sys

ubsbm.sys Mon Jul 30 18:39:46 2007 (46AE1452)
Unibrain S.A. FireAPI? Serial Bus Manager driver [br][br]Part of Firewire 800 (1394b)
http://www.carrona.org/drivers/driver.php?id=ubsbm.sys

UB1394.SYS Tue Oct 2 08:44:28 2007 (4701E8CC)
Unibrain S.A. ubCore? 1394 Class driver [br][br]Firewire 800 (1394b)
http://www.carrona.org/drivers/driver.php?id=UB1394.SYS

ubohci.sys Thu Oct 4 14:57:54 2007 (4704E352)
Unibrain S.A. ubCore? 1394 OHCI driver[br]
http://www.carrona.org/drivers/driver.php?id=ubohci.sys

flashud.sys Fri Mar 6 10:57:27 2009 (49B0F387)
Intel One Boot Flash Utility Driver [br] [br]More Info: http://downloadmirror.intel.com/9137...leaseNotes.txt
http://www.carrona.org/drivers/driver.php?id=flashud.sys

synusb64.sys Fri Jun 26 15:30:11 2009 (4A44CD63)

synusb64.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

ICCWDT.sys Wed Aug 18 10:27:45 2010 (4C6B9981)
IIntel(R) Watchdog Timer Driver
http://www.carrona.org/drivers/driver.php?id=ICCWDT.sys

automap.sys Thu Apr 19 13:30:08 2012 (4F8FF740)
Automap MIDI Driver Service
http://www.carrona.org/drivers/driver.php?id=automap.sys

FUJ02E3.sys Tue Jul 2 04:16:53 2013 (51D23815)
Fujitsu FUJ02E3 device driver
http://www.carrona.org/drivers/driver.php?id=FUJ02E3.sys

intelppm.sys Thu Aug 22 10:46:35 2013 (5215CFEB)
Intel Processor driver
http://www.carrona.org/drivers/driver.php?id=intelppm.sys

MFWAMIDI64.sys Thu Jan 2 22:41:52 2014 (52C5DD20)
MOTU MIDI Driver
http://www.carrona.org/drivers/driver.php?id=MFWAMIDI64.sys

MFWAWAVE64.sys Thu Jan 2 22:41:53 2014 (52C5DD21)
MOTU Multimedia Audio
http://www.carrona.org/drivers/driver.php?id=MFWAWAVE64.sys

Motufwa64.sys Thu Jan 2 22:42:02 2014 (52C5DD2A)

Motufwa64.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

MotuBus64.sys Thu Jan 2 22:43:16 2014 (52C5DD74)
Motu bus driver
http://www.carrona.org/drivers/driver.php?id=MotuBus64.sys

RtsUStor.sys Fri Jan 3 06:31:27 2014 (52C64B2F)
Realtek USB Card Reader
http://www.carrona.org/drivers/driver.php?id=RtsUStor.sys

nvnusbaudio.sys Fri Jan 3 13:22:43 2014 (52C6AB93)
Novation USB Audio Driver
http://www.carrona.org/drivers/driver.php?id=nvnusbaudio.sys

mfencbdc.sys Fri Sep 19 12:38:20 2014 (541C079C)
McAfee Event driver
http://www.carrona.org/drivers/driver.php?id=mfencbdc.sys

TeeDriverx64.sys Tue Sep 23 22:01:14 2014 (5421D18A)
Intel Management Engine Interface driver
http://www.carrona.org/drivers/driver.php?id=TeeDriverx64.sys

mfehidk.sys Thu Sep 25 00:26:25 2014 (54234511)
McAfee Host Intrusion Detection Link Driver
http://www.carrona.org/drivers/driver.php?id=mfehidk.sys

mfewfpk.sys Thu Sep 25 00:26:43 2014 (54234523)
McAfee
http://www.carrona.org/drivers/driver.php?id=mfewfpk.sys

mfeapfk.sys Thu Sep 25 00:27:27 2014 (5423454F)
McAfee
http://www.carrona.org/drivers/driver.php?id=mfeapfk.sys

mfeavfk.sys Thu Sep 25 00:27:42 2014 (5423455E)
McAfee Anti-Virus File System Filter Driver
http://www.carrona.org/drivers/driver.php?id=mfeavfk.sys

mfefirek.sys Thu Sep 25 00:29:05 2014 (542345B1)
McAfee
http://www.carrona.org/drivers/driver.php?id=mfefirek.sys

cfwids.sys Thu Sep 25 00:29:30 2014 (542345CA)
McAfee
http://www.carrona.org/drivers/driver.php?id=cfwids.sys

e1d64x64.sys Mon Sep 29 19:02:41 2014 (542990B1)
Intel(R) Gigabit Adapter NDIS 6.x driver
http://www.carrona.org/drive... Read more

http://www.eightforums.com/bsod-crashes-debugging/63999-bsod-bugcheck-139-list_entry_corrupt.html
Relevancy 50.31%

I recently upgraded my RAM and started having loads of issues. I replaced it and the new RAM seemed fine for about a week, but now I'm getting random crashes again.

A:BSOD Bugcheck 0x0000001e

Welcome
Dozens of tests and all different resutls; points to memory. Take a memtest
http://www.geekstogo.com/forum/topic...ing-memtest86/
Test for 8 passes and then test each stick in good slot for 6 passes each.

http://www.sevenforums.com/bsod-help-support/243130-bsod-bugcheck-0x0000001e.html
Relevancy 50.31%

Hello Can't seem to fix this error at first BSOD, 0x0000000a bugcheck the computer would BSOD as soon as user logs in It first showed up when trying to update to Windows from Windows Could not successfully do a system restore So tried updating to Windows it still crashes but not immediately after logging in It will always crash immediately after I do scan hardware within device manager Or if I use speccy to gather information on system Event Viewer shows bugcheck x a and another error The device Device Ide iaStor did not respond within the timeout period Looking at debug outputs I've seen either usbccgp sys or memory corruption mentioned I also thought it might be the card reader I've tried to get updated drivers from gateway's website with no luck Any help would be appreciated OS - Windows x First had Windows installed on SSD Original hard drive had Windows Vista Full retail version Just reinstalled Windows CPU - Intel Core Quad Q ghz Video Card - Intel GMA MotherBoard - LGA Socket Intel G Express Power Supply - System Manufacturer - Gateway Exact model number - DX - Desktop

http://www.bleepingcomputer.com/forums/t/628952/bsod-bugcheck-0x0000000a/
Relevancy 50.31%

Hi again So while I was gaming in Star Citizen and having GPU-Z running in background the game froze and I got BSOD with the message CLOCK WATCHDOG TIMEOUT So I opened the dmp file and this is what I got Loading Dump File C Users Gil BSOD gaming Bugcheck while Desktop - - dmp Mini Kernel Dump File Only Bugcheck BSOD while gaming registers and stack trace are available Bugcheck BSOD while gaming Code Symbol Path validation summary Response Time ms Location Deferred SRV D SymCache http msdl microsoft com download symbols Symbol search path is SRV D SymCache http msdl microsoft com download symbols Executable search path is Windows Kernel Version MP procs Free x Product WinNt suite TerminalServer SingleUserTS Built by amd fre th release - Machine Name Kernel base xfffff a c PsLoadedModuleList xfffff a facf Debug session time Thu Feb UTC System Uptime days Loading Kernel Symbols Press ctrl-c cdb kd ntsd or ctrl-break windbg to abort symbol loads that take too long Run sym noisy before reload to track down problems loading symbols Loading User Symbols Loading Bugcheck BSOD while gaming unloaded module list Bugcheck Analysis Use analyze -v to get detailed debugging information BugCheck ffffd e Probably caused by Unknown Image ANALYSIS INCONCLUSIVE Followup MachineOwner --------- I have no idea what to do next Some more info Code Dump File - - dmp Crash Time PM Bug Check String Bug Check Code x Parameter Parameter Parameter ffffd e Parameter Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe File Description Product Name Company File Version Processor x Crash Address ntoskrnl exe Stack Address Stack Address Stack Address Computer Name Full Path C Users Gil Desktop - - dmp Processors Count Major Version Minor Version Dump File Time PM appreciate any help EDIT I have one theory I saw in event viewer the WHEA warning as well my current theory is that I run a GHz Ivy Bridge which is overclocked to GHz BUT yesterday I went to my BIOS settings and decided to ENABLE C C and C state package I believe they are not desirable with OC CPUs So I just disabled them but I still have C E state set to enabled Also I do not OC my GPU All my components are water cooled both GPU's and CPU The Ivy bridge Core i K is delidded and I used Cool Laboratory LiquidUltra thermal paste so temps are not an issue with my current beast of cooling system huge radiators and plenty of fans Additionally this happened while playing Star Citizen which currently only utilize CPU more over GPU for graphics and since my C states were enabled probably this caused a conflict I'll have to retry this - - zip GIL-PC-Fri zip

A:Bugcheck BSOD while gaming

   Warning
Programs that claim to update your drivers install either the wrong or corrupted drivers.
If you have installed any driver with Driver Booster 3, please remove them as it may cause trouble.

Remove the OC'ing as first step and second step is: update your Intel Rapid Storage Technology drivers or remove the related software.
Driver Reference Table - iaStorA.sys

Code:
ffffd000`21be01b8 fffff801`459ff700Unable to load image iaStorA.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for iaStorA.sys
*** ERROR: Module load completed but symbols could not be loaded for iaStorA.sys
iaStorA+0x8f700

7: kd> lmvm iaStorA
start end module name
fffff801`45970000 fffff801`45c39000 iaStorA T (no symbols)
Loaded symbol image file: iaStorA.sys
Image path: iaStorA.sys
Image name: iaStorA.sys
Timestamp: Sat May 03 01:06:56 2014 (53642510)
CheckSum: 000B0574
ImageSize: 002C9000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

http://www.tenforums.com/bsod-crashes-debugging/41233-bugcheck-bsod-while-gaming.html
Relevancy 50.31%

Hi Guys,

I have a new Windows 7 PC. It keeps freezing and crashing.

Minidump is attached in zip file.

Please tell me what should i do to fix the issue. Have been searching for a resolution for hours. As you can see in the attached reliability screenshot it shows that my system is very unreliable at the moment.

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.48
Locale ID: 1061

Additional information about the problem:
BCCode: 9f
BCP1: 0000000000000003
BCP2: FFFFFA8007417A20
BCP3: FFFFF80000B9C518
BCP4: FFFFFA800A098E10
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\020110-17097-01.dmp
C:\Users\priit\AppData\Local\Temp\WER-28516-0.sysdata.xml

A:BSOD: The bugcheck was: 0x0000009f

  
Quote: Originally Posted by 7newbie


Hi Guys,

I have a new Windows 7 PC. It keeps freezing and crashing.

Minidump is attached in zip file.

Please tell me what should i do to fix the issue. Have been searching for a resolution for hours. As you can see in the attached reliability screenshot it shows that my system is very unreliable at the moment.

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.48
Locale ID: 1061

Additional information about the problem:
BCCode: 9f
BCP1: 0000000000000003
BCP2: FFFFFA8007417A20
BCP3: FFFFF80000B9C518
BCP4: FFFFFA800A098E10
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\020110-17097-01.dmp
C:\Users\priit\AppData\Local\Temp\WER-28516-0.sysdata.xml



Hi and welcome

this crash was probably caused by netr6164.sys which is part of your wifi driver.

I would download and install a fresh driver

I would also run a system file check
type cmd in search>right click and run as admin>sfc /scannow

If you are over clocking Stop
If you have a raid update its driver.
Ken


Code:


Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\K\Desktop\020110-17097-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff800`00b9c500?
Symbol search path is: SRV*d:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0xfffff800`02c68000 PsLoadedModuleList = 0xfffff800`02ea5e50
Debug session time: Sun Jan 31 13:56:17.534 2010 (GMT-5)
System Uptime: 2 days 6:01:10.585
Loading Kernel Symbols
...............................................................
................................................................
...........................
Loading User Symbols
Loading unloaded module list
....................
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa8007417a20, fffff80000b9c518, fffffa800a098e10}

*** WARNING: Unable to verify timestamp for netr6164.sys
*** ERROR: Module load completed but symbols could not be loaded for netr6164.sys
Probably caused by : netr6164.sys

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

DRIVER_POWER_STATE_FAILURE (9f)
A driver is causing an inconsistent power state.
Arguments:
Arg1: 00000000... Read more

http://www.sevenforums.com/bsod-help-support/60196-bsod-bugcheck-0x0000009f.html
Relevancy 50.31%

Hi all,

I have been playing FS for the last 4 years and I have started to have totally random BSODS when I play it. It is sooooo annoying and i lose flights constantly.

I think this is what you want?

The computer has rebooted from a bugcheck. The bugcheck was: 0x100000c5 (0x012c0089, 0x00000002, 0x00000001, 0x805505a1)

The computer has rebooted from a bugcheck. The bugcheck was: 0x1000008e (0xc0000005, 0xf6002a1a, 0xb279d93c, 0x00000000)

The computer has rebooted from a bugcheck. The bugcheck was: 0x1000000a (0x00000103, 0x0000001c, 0x00000001, 0x804e1bf8)

Error code 1000000a, parameter1 00000103, parameter2 0000001c, parameter3 00000001, parameter4 804e1bf8.

Error code 1000008e, parameter1 c0000005, parameter2 f6002a1a, parameter3 b279d93c, parameter4 00000000.

Error code 1000000a, parameter1 00000103, parameter2 0000001c, parameter3 00000001, parameter4 804e1bf8.

I hope you can help this is driving me crazy,

Cheers Dom
 

A:Bugcheck, Flightsim and BSOD's

Hello and welcome to Techspot.

Go HERE and follow the instructions.

If that doesn`t help. Zip 5 or 6 of your latest minidumps together and attach them here.

Regards Howard :wave: :wave:
 

http://www.techspot.com/community/topics/bugcheck-flightsim-and-bsods.46013/
Relevancy 50.31%

Bugcheck - BSOD Asus P Be E cpu x GB Corsair twin x PC - C x GB Adata DQVE B PC - - - bugcheck Win7/64 BSOD- - FSB DDR - voltages set to auto PCI Express freq locked at PCI clock sync mode at MHz Retail copy of Win Home premium upgrade I built this system almost years ago and originally installed Vista Ultimate on it A HD crash in January led me to install Win on the warranty replacement HD The recent HD crash of the warranty drive led me to reinstall Win on a SSD Intel X -M GB Sometimes I just hate upgrading the system After a HD crash necessitating a new HD I elected to install a SSD for my OS programs drive Of course I had to reinstall Win and I decided to update the BIOS and chipset too Now I'm experiencing random BSODs due to bugcheck errors Where should I start to troubleshoot this Revert the BIOS to the earlier version can I go back on the BIOS version with Asus's lt alt gt F easyflash For the chipset update I went to Intel's site and got the latest for the P chipset for Win On the Asus BSOD- bugcheck Win7/64 P B-E site the chipset was still an earlier version for Vista my old chipset version Could either the BIOS or the chipset update be causing my bugcheck error I'm not sure what BSOD- bugcheck Win7/64 to try first to debug this The BSODs can happen anywhere from a few minutes apart to hours apart No pattern that I can tell

A:BSOD- bugcheck Win7/64

Blue Screen of Death (BSOD) Posting Instructions

http://www.sevenforums.com/bsod-help-support/130700-bsod-bugcheck-win7-64-a.html
Relevancy 50.31%

My system crashed with a bluescreen. Probably a Bluray burner I have, but want to be sure.
BSOD: Bugcheck 0x0000003b
Dell Optiplex 960
Intel Core Duo 3.16 Ghz
8GB RAM
Windows 7 Pro 64-bit OEM
6 months old

A:BSOD: Bugcheck 0x0000003b

Software Concerns:Spybot Search and Destroy is not the best malware/spyware utility. Take a look at Good and Free system security combination. for better options.
Analysis:Your Cyberlink UDF Driver caused both of your most recent crashes. Remove all Cyberlink software. If you need alternatives, let us know and we will help you find them. You could also contact Cyberlink support or install more up to date software from them to resolve it.

Start Menu -> Control Panel -> Uninstall a program

http://www.sevenforums.com/bsod-help-support/239716-bsod-bugcheck-0x0000003b.html
Relevancy 50.31%

Hi I running 101 BSOD Bugcheck code Winodws x Professional A couple days ago i started getting blue screens whenever i was trying to convert a mkv file to DVD and burn it i thought this was just a problem with the software i was using so tried a different version and i was getting the same Now it happens with different software and also doing other video editing I've done a bit of researching and people talk about having an overclocked system i dont Others have talked about overheating is this what is happening or is it something more serious I've had this computer for just over a year now and not had this problem until Bugcheck code 101 BSOD a couple days ago I was planning to do a reinstall soon so i did one just after this started happening and it still happens Attached should be the dump and other things you'll find useful according to this post http www sevenforums com crashes-d tructions html Thanks Alex

A:Bugcheck code 101 BSOD

Bugcheck 101 is mainly caused by a defective CPU or outdated BIOS

Details about this bugcheck:
http://www.sevenforums.com/crash-loc...tml#post567135

Win 7 A Clock Interrupt... BSOD (101 Error)



   Information

Go to your motherboard's website and check your version of your BIOS. See if there are any problems you are having that are solved by a a later version. I do not often recommend flashing the BIOS because there is a risk involved. If there is problem addressed by a BIOS that applies to your computer, consider flashing your BIOS to the latest version. If you choose to do this, flash you BIOS outside of Windows.

Run Prime 95 again to test your CPU and your ram. Carefully the instructions in this tutorial: CPU - Stress Test with Prime95. Run 3 separate tests, one on each of the settings (Blend, Small FFTs, Large FFTs). Post back with your results.

http://www.sevenforums.com/bsod-help-support/154700-bugcheck-code-101-bsod.html
Relevancy 50.31%

? OS - Windows 7 prefessional
? x64
? original installed OS on system: windows 7 professional 64 bit
? the OS is a full retail version
? Age of system: one year
? Age of OS installation: 7 moths
? CPU: Intel(R) Core(Tm) i7 Q720 @ 1.60 Ghz
? Video Card: NVIDIA Quadro FX 1800M
? MotherBoard: Hewlett-Packard 1521
? Power Supply - TDP 45w



I get the first time the bugchek 101 and I do not know why!

Thank you.

A:[BSOD] Bugcheck 101; What The Reason?

All pretty much point to issues with PCI Express. However the Avast sandbox drivers have popped up fairly often in the callstacks for em, so you may wanna update it or simple disable for the time being. You can also use Driver Verifier to make sure we aren't chasing after shadows here.

It does look very much like a hardware issue, almost as if some PCI Express card got dislodged or damaged somehow. You may wanna get your warranty ready to be put to use, since this is a laptop.

http://www.techsupportforum.com/forums/f299/bsod-bugcheck-101-what-the-reason-607465.html
Relevancy 50.31%

My computer has been crashing repeatly after it has been shut down for a day and
restarted. Here is the information I get from Bluescreen View:

020111-20014-01.dmp 2/1/2011 6:58:06 PM NTFS_FILE_SYSTEM 0x00000024 00000000`001904fb fffff880`02dcb588 fffff880`02dcadf0 fffff800`02a6bc56 Ntfs.sys Ntfs.sys+213d8 x64 C:\Windows\Minidump\020111-20014-01.dmp 2 15 7600 275,224


Any help would be greatly appreciated!!

Thanks

A:BSOD caused by bugcheck

I could not figure out how to download the perfmon/report, could you please give a little more info on how to do that? i went to the start buttton and type perfmon/report, but nothing came up.
This is a home built system that was built about 6 months ago. It is a new install of windows7. I have 4 hard drives of 500gb each.
Thanks for any info.

http://www.sevenforums.com/bsod-help-support/141984-bsod-caused-bugcheck.html
Relevancy 50.31%

When I turn on my Windows computer or wake it up from hibernate status then it crashes after about mto min but during restart system quot suggests quot normal start instead of restart in a Safe Mode It reports bugcheck x d and points out 0x000000d1 BSOD bugcheck NETw s BSOD bugcheck 0x000000d1 sys file This is the information that I received for the error that my windows detected Windows has recovered from an unexpected shutdown Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode d BCP BCP BCP BCP FFFFF A OS Version Service Pack Product Files that help describe the problem C Windows Minidump - - dmp C Users JR AppData Local Temp WER- - sysdata xml The original OS on the system is Windows Ultimate -bit with SP Windows came pre-installed on the system System and OS installation are year old The computer is Dell Inc laptop XPS L x with Intel R Core TM i CPU Q GHz and GB RAM I use wireless network card Intel R WiFi Link BGN and I have wired Realtek PCIe GBE Family Controller which I never use Please help me solve this problem Thank you in advance for your help

A:BSOD bugcheck 0x000000d1

Hi and welcome to SF

Remove Mcafee from your system for testing purposes.

Download and install Microsoft Security Essentials with windows firewall enable.

Update sofware\driver for your Intel 5100 wifi.

http://downloadcenter.intel.com/Default.aspx


Finish with the above steps and post back with results\news.

http://www.sevenforums.com/bsod-help-support/217946-bsod-bugcheck-0x000000d1.html
Relevancy 50.31%

Hi all This has been an ongoing battle for about weeks I have reformatted and re-installed windows at least times re-flashed my BIOS At first it was freezing while attempting to go into sleep mode I believe that is fixed Now it freezes even while in games I have even run check disk on the HDD a few times as well I am this close to chalking this to a bad HDD bugcheck 0x0000001e a BSOD day, The was: Several and buying a new one Could someone please take a look and confirm I also am aware I have several hosts file errors too but I don't know if that's part of it or something else entirety I would be so grateful for any incite Several BSOD a day, The bugcheck was: 0x0000001e x -bit or x - the original installed OS on the system Windows professional bit - an OEM or full retail version OEM - What is the age of system hardware a little over a year - What is the age of OS installation have you re-installed the OS yes and about a week Thank You Lauren

A:Several BSOD a day, The bugcheck was: 0x0000001e

If you think it is a HD run chkdsk

A- CHKDSK /R /F:





Quote:
Run CHKDSK /R /F from an elevated (Run as administrator) Command Prompt.

Do this for each hard drive on your system.

When it tells you it can't do it right now - and asks you if you'd like to do it at the next reboot - answer Y (for Yes) and press Enter.

Then reboot and let the test run.

It may take a while for it to run, but keep an occasional eye on it to see if it generates any errors.

See "CHKDSK LogFile" below in order to check the results of the test.



B- Elevated Command Prompt:





Quote:
Go to Start and type in "cmd.exe" (without the quotes)

At the top of the Search Box, right click on Cmd.exe and select "Run as administrator"



C-CHKDSK LogFile:





Quote:
Go to Start and type in "eventvwr.msc" (without the quotes) and press Enter

Expand the Windows logs heading, then select the Application log file entry.

Double click on the Source column header.

Scroll down the list until you find the Chkdsk entry (wininit for Win7) (winlogon for XP).

Copy/paste the results into your next post.


Just to be sure I would also download malwarebytes and run a scan.

Please download the free version of Malwarebytes.
Update it immediately.
Do a full system scan
Let us know the results at the end.

Malwarebytes : Download free malware, virus and spyware tools to get your computer back in shape!

These crashes were caused by memory corruption/exception (probably a driver).
Please run these two tests to verify your memory and find which driver is causing the problem.

* If you are overclocking anything reset to default before running these tests.
In other words STOP!!!

* If you have raid update its Driver.

Memtest.





Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.



RAM - Test with Memtest86+

Driver verifier






Quote:
Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

So, I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Special Pool", "Force Pending I/O Requests" and "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen.
Continue to use your system normally, and if you know what causes the crash, do that repeatedly.
The objective here is to get the system to crash because Driver Verifier is stressing the drivers out... Read more

http://www.sevenforums.com/bsod-help-support/213721-several-bsod-day-bugcheck-0x0000001e.html
Relevancy 50.31%

So I have recently upgraded my computer and the whole thing is brand new new motherboard cpu memory harddrive and video Bugcheck BSOD, error card Since getting my computer up and running I keep getting BSOD's and when I check the event logs I get this error Log Name System Source Microsoft-Windows-WER-SystemErrorReporting Date PM Event ID Task Category None Level Error Keywords Classic User N A Computer EVAN-PC Description The computer has rebooted from a bugcheck BSOD, Bugcheck error The bugcheck was x b x c xfffff b b xfffff e x A dump was saved in C Windows MEMORY DMP Report Id - BSOD, Bugcheck error - Event Xml lt Event xmlns quot http schemas microsoft com win events event quot gt lt System gt lt Provider Name quot Microsoft-Windows-WER-SystemErrorReporting quot Guid quot ABCE E -DE - - - FA C quot EventSourceName quot BugCheck quot gt lt EventID Qualifiers quot quot gt lt EventID gt lt Version gt lt Version gt lt Level gt lt Level gt lt Task gt lt Task gt lt Opcode gt lt Opcode gt lt Keywords gt x lt Keywords gt lt TimeCreated SystemTime quot - - T Z quot gt lt EventRecordID gt lt EventRecordID gt lt Correlation gt lt Execution ProcessID quot quot ThreadID quot quot gt lt Channel gt System lt Channel gt lt Computer gt EVAN-PC lt Computer gt lt Security gt lt System gt lt EventData gt lt Data Name quot param quot gt x b x c xfffff b b xfffff e x lt Data gt lt Data Name quot param quot gt C Windows MEMORY DMP lt Data gt lt Data Name quot param quot gt - - lt Data gt lt EventData gt lt Event gt Can someone please help me fix this problem I have no idea what to do Thanks By the way I am running bit Windows Home premium which I updated from Vista and this computer is only weeks old except for the case everything else is new

A:BSOD, Bugcheck error

I looked at both of your dumps and they are nearly identical. Both are Bugcheck 3B, System Service Exception and indicate memory corruption. Both directly blame atikmdag.sys, a video driver which is up to date.

I find some out of date drivers loaded on your system which can cause conflict with your video subsystem. Before you tackle the video drivers, I recommend that you update the following drivers through the links provided. One is very obsolete.





Quote:
ADIHdAud.sys Thu May 21 04:21:06 2009 - SoundMAX Digital HD Audio Driver. OEM - none at Analog Devices | Mixed-signal and Digital Signal Processing ICs. Try updating this driver through your motherboard or computer manufacturer's website. If there is no update, upgrade your sound card and and uninstall the current sound card.

mv61xx.sys Thu Mar 19 23:48:21 2009 - Marvell Thor Windows Driver - Marvell Thor - Marvell Semiconductor, Inc. Marvell: Support. Update this driver.

scmndisp.sys Wed Jan 17 02:48:03 2007 - Netgear Neutral Wireless Solution. Support Home Page. Update or rename this driver. It is way obsolete.

xusb21.sys Wed Apr 08 10:28:44 2009 - XBox USB wireless controller. Software Download. Update this driver.




   Note
Renaming drivers: create a restore point, using Windows Explorer, navigate to C:\Windows\System32\Drivers, locate the driver files, and rename them from .sys to .old. Reboot and the drivers will not load. This will break whatever software or hardware these drivers are associated with.

Update or rename the above drivers, reboot and see how your systems runs. If these actions do not solve the problem, upload the latest dumps. Then download the latest video drivers from Global Provider of Innovative Graphics, Processors and Media Solutions | AMD. Remove (uninstall) Catalyst Control Center and only install the display driver.

Code:
Windows 7 Kernel Version 7600 MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Machine Name:
Kernel base = 0xfffff800`02e06000 PsLoadedModuleList = 0xfffff800`03043e50
Debug session time: Tue Jan 11 19:51:47.887 2011 (GMT-5)
System Uptime: 0 days 1:06:33.980
Loading Kernel Symbols
...............................................................
................................................................
.......................
Loading User Symbols
Loading unloaded module list
..........
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 3B, {c0000005, fffff88004b5b817, fffff88007e87900, 0}

Probably caused by : atikmdag.sys ( atikmdag+90817 )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff88004b5b817, Address of the exception record for the exception that caused the bugcheck
Arg3: fffff88007e87900, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.

Debugging Details:
------------------
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instr... Read more

http://www.sevenforums.com/bsod-help-support/137151-bsod-bugcheck-error.html
Relevancy 50.31%

Hi first time post I hope to get help with a reoccurring crash Here are x64 BSOD BugCheck 9F Win7 my basic PC stats Windows Professional x Original OS was Windows Home Premium x has been upgraded with Windows Anytime Upgrade The original OS was OEM Hardware is about year old OS is about year old System is a Dell Studio XPS The crash symptoms are as such it only occurs when BSOD Win7 x64 BugCheck 9F I do a sleep and perhaps also a hibernate not sure it is intermittent but more often than once per month the computer enters sleep BSOD Win7 x64 BugCheck 9F correctly but once in sleep it occasionally will reboot itself due to a bugcheck F typically after several hours the computer can exit sleep properly if it has not already crashed the computer is stable with no other types of crashes that is if I avoid the sleep and hibernate features I do not have any crashes or problems the computer has been patched fully on Windows Update despite the informational message in the perfmon report to the contrary I have Microsoft Security Essentials running and up to date I have no other symptoms of viruses or malware I tried loading the dump in WinDbg which implicated usbccgp sys but do not know how to proceed from there or whether that driver is in fact the root cause I would greatly appreciate any help since I would love to use the sleep feature of my computer Eric

A:BSOD Win7 x64 BugCheck 9F

Your Logitech webcam driver is the cause, please update it
Support + Downloads

The driver it uses it obsolete

Code:
lvpopf64.sys fffff880`044b1000 fffff880`045fbd00 0x0014ad00 0x464502a5 12/05/2007 03:56:21
lvuvc64.sys fffff880`06020000 fffff880`06390500 0x00370500 0x46450350 12/05/2007 03:59:12
LVUSBS64.sys fffff880`02ff5000 fffff880`02fff900 0x0000a900 0x464503d0 12/05/2007 04:01:20

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa800b854a00, fffff80000b9c518, fffffa8007f88a60}

*** WARNING: Unable to verify timestamp for lvuvc64.sys
*** ERROR: Module load completed but symbols could not be loaded for lvuvc64.sys
Probably caused by : lvuvc64.sys
DRIVER_POWER_STATE_FAILURE (9f)
A driver is causing an inconsistent power state.
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: fffffa800b854a00, Physical Device Object of the stack
Arg3: fffff80000b9c518, Functional Device Object of the stack
Arg4: fffffa8007f88a60, The blocked IRP

Debugging Details:
------------------
DRVPOWERSTATE_SUBCODE: 3

IRP_ADDRESS: fffffa8007f88a60

DEVICE_OBJECT: fffffa800b893350

DRIVER_OBJECT: fffffa800a7d7e70

IMAGE_NAME: lvuvc64.sys

DEBUG_FLR_IMAGE_TIMESTAMP: 46450350

MODULE_NAME: lvuvc64

FAULTING_MODULE: fffff88006020000 lvuvc64

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

BUGCHECK_STR: 0x9F

PROCESS_NAME: System

CURRENT_IRQL: 2

LAST_CONTROL_TRANSFER: from fffff8000313bcd2 to fffff800030cdc40

STACK_TEXT:
fffff800`00b9c4c8 fffff800`0313bcd2 : 00000000`0000009f 00000000`00000003 fffffa80`0b854a00 fffff800`00b9c518 : nt!KeBugCheckEx
fffff800`00b9c4d0 fffff800`030d95fc : fffff800`00b9c600 fffff800`00b9c600 00000000`00000000 00000000`00000001 : nt! ?? ::FNODOBFM::`string'+0x34a90
fffff800`00b9c570 fffff800`030d9496 : fffffa80`0bb18710 fffffa80`0bb18710 00000000`00000000 00000000`00000000 : nt!KiProcessTimerDpcTable+0x6c
fffff800`00b9c5e0 fffff800`030d937e : 0000006c`71edc95e fffff800`00b9cc58 00000000`002d8ec8 fffff800`03247b88 : nt!KiProcessExpiredTimerList+0xc6
fffff800`00b9cc30 fffff800`030d9167 : 0000001d`944426c2 0000001d`002d8ec8 0000001d`9444265d 00000000`000000c8 : nt!KiTimerExpiration+0x1be
fffff800`00b9ccd0 fffff800`030c596a : fffff800`03243e80 fffff800`03251cc0 00000000`00000002 fffff880`00000000 : nt!KiRetireDpcList+0x277
fffff800`00b9cd80 00000000`00000000 : fffff800`00b9d000 fffff800`00b97000 fffff800`00b9cd40 00000000`00000000 : nt!KiIdleLoop+0x5a
STACK_COMMAND: kb

FOLLOWUP_NAME: MachineOwner

FAILURE_BUCKET_ID: X64_0x9F_IMAGE_lvuvc64.sys

BUCKET_ID: X64_0x9F_IMAGE_lvuvc64.sys

Followup: MachineOwner
---------

http://www.sevenforums.com/bsod-help-support/183358-bsod-win7-x64-bugcheck-9f.html
Relevancy 50.31%

Hi all I just built this PC recently week ago have not encountered any problems until recently when I've been cpu usage BSOD 0x00000124 heavy BSOD under hal.dll trying to overclock it My motherboard is the Asrock Z Pentium anniversary board the one that automatically overclocks with the touch of a button I choose what speed I want and it sets the multiplier and core voltage It lets you choose if you want to OC it to ghz ghz ghz I currently have it set at ghz which seems to be pretty tame compared to other z g owners I have monitors connected to the PC and it will only bluescreen when i push the cpu to its limit Ie when I'm watching Youtube Twitch tv at HD and playing League of Legends or Dark Souls on the other screen When I am doing this my cpu temp stays between - C while at idle it hovers around C and has never BSOD at idle I've noticed that before BSOD occur there will be some latency stuttering internet lag and I'm hoping the problem is outdated drivers specifically the realtek BSOD under heavy cpu usage BSOD 0x00000124 hal.dll ethernet controller Problem signature Problem Event Name BlueScreen OS Version Locale ID Extra information about the problem BCCode BCP BCP FFFFFA BCP BF BCP OS Version Service Pack Product I am aware of the long-term risk of overclocking my pentium g but I am just using it as a stopgap until the new chips come out Any help advice will be much appreciated

A:BSOD under heavy cpu usage BSOD 0x00000124 hal.dll

Run 5 tests on IBT at MAXIMUM setting and report the temperatures. Read very carefully before starting.

CPU - Stress Test Using IntelBurnTest

http://www.sevenforums.com/bsod-help-support/358549-bsod-under-heavy-cpu-usage-bsod-0x00000124-hal-dll.html
Relevancy 49.88%

I'm not sure where to start so I'll 0x00000124 BSOD start from BSOD 0x00000124 the when I got my SSD After switching to the SanDisk SSD I noticed I BSOD 0x00000124 get BSODs when my computer awakes from sleep mode so I never use sleep mode I don't like to use sleep mode anyways As time passed by I noticed my computer was rebooting randomly I thought maybe it was overheating from my cpu due to my heatsink being terrible but then after I upgraded to H i closed water loop system I'm still getting the random reboots with no BSODs I've been watching my cpu temps as I'm doing my tasks and the temps don't rise about c Now that I've installed the new Razer Black Widow Ultimate Mechanical keyboard I've noticed BSODs when it randomly shuts down In the Manager under Windows Logs I notice this Critical Event ID quot The system has rebooted without cleanly shutting down first This error could be caused if the system stopped responding crashed or lost power unexpectedly Steps attempted to resolve issue I've tried updating my drivers for my mobo and when I checked I've already got the latest drivers Upgrade cpu heatsink to the H i Update OS I've attached the zip file created from the the SF Diagnostic tool Any help would be very much appreciated I don't know how to read dump files After submitting this post I launched Battlefield for the rd time I got my third reboot Each time I was either launching battlefield or playing it

A:BSOD 0x00000124

Hi oddmut.

It appears that the BSODs are appearing during playing Battlefield4; and computer is more or less 3 years old.

Update your display driver to the latest WHQL.

Is the computer hot? Report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy. Alternatively, you can publish a Speccy snapshot too: Speccy - Publish Snapshot of your System Specs .

Check if the Power Supply Unit (PSU) supplying adequate power to the computer or not.
eXtreme Power Supply Calculator
Also let us know the wattage of the PSU.

Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.
If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Stress test the CPU.
Hardware - Stress Test With Prime95

Let us know the results.
________________________________________________________________________________

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 124, {0, fffffa800f4a1028, f2000000, 20008f}

Probably caused by : GenuineIntel

Followup: MachineOwner
---------

http://www.sevenforums.com/bsod-help-support/315019-bsod-0x00000124.html
Relevancy 49.88%

Can any one help with this please?

random BSOD

0x00000124 (0x00000000, 0x86F10020, 0xB200040, 0x00000800


Intel Q8300,
4GB, DDR2
750GB,
Inno 3D Green Edition 9800GT
Foxconn G31MX-K Motherboard


Memtest passes fine.
Chkdsk passes Fine.
Reinstall Still happens :S

A:BSOD = 0x00000124

You need to fill out your system specs my sig has the link on how to go buy about setting it up.

http://www.sevenforums.com/bsod-help-support/78466-bsod-0x00000124.html
Relevancy 49.88%

- x86 (32-bit) or x64 ? x64
- the original installed OS on the system? Windows 7
- an OEM or full retail version? OEM

- What is the age of system (hardware)? About a Year
- What is the age of OS installation (have you re-installed the OS?) Week Old

The Computer Freezes and does nothing else, i have to restart it to use the computer again, i use BlueScreenViewer and it shows a dump file

Manufacturer: Custom
Processor: Intel(R) Core(TM) i7 CPU 960 @ 3.20GHz (8 CPUs), ~3.2GHz
Memory: 24576MB RAM
Hard Drive: 2 TB
Video Card: NVIDIA GeForce GTX 580
Monitor: Acer 23in
Sound Card: Realtek High Definition
Operation System: Windows 7 Ultimate 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.110622-1506)
Motherboard: Asus P6X58D Premium
Computer Case: Cooler Master HAF 932 Full Tower Black Case

A:BSOD 0x00000124

BUCKET_ID: X64_0x124_GenuineIntel_PROCESSOR_MAE_PRV

Stop 0x124 is a hardware error.... if you are overclocking try resetting your processor to standard settings and see if that helps ... if you continue to get BSOD here are some more things you may want to consider ..





Quote:
Stop 0x124 - what it means and what to try
Synopsis:

A "stop 0x124" is fundamentally different to many other types of bluescreens because it stems from a hardware complaint. Stop 0x124 minidumps contain very little practical information, and it is therefore necessary to approach the problem as a case of hardware in an unknown state of distress.
Generic "Stop 0x124" Troubleshooting Strategy:
1) Ensure that none of the hardware components are overclocked. Hardware that is driven beyond its design specifications - by overclocking - can malfunction in unpredictable ways.

2) Ensure that the machine is adequately cooled. If there is any doubt, open up the side of the PC case (be mindful of any relevant warranty conditions!) and point a mains fan squarely at the motherboard. That will rule out most (lack of) cooling issues.

3) Update all hardware-related drivers: video, sound, RAID (if any), NIC... anything that interacts with a piece of hardware. It is good practice to run the latest drivers anyway.

4) Update the motherboard BIOS according to the manufacturer's instructions. Their website should provide detailed instructions as to the brand and model-specific procedure.

5) Rarely, bugs in the OS may cause "false positive" 0x124 events where the hardware wasn't complaining but Windows thought otherwise (because of the bug). At the time of writing, Windows 7 is not known to suffer from any such defects, but it is nevertheless important to always keep Windows itself updated.

6) Attempt to (stress) test those hardware components which can be put through their paces artificially. The most obvious examples are the RAM and HDD(s). For the RAM, use the in-built memory diagnostics (run MDSCHED) or the 3rd-party memtest86 utility to run many hours worth of testing. For hard drives, check whether CHKDSK /R finds any problems on the drive(s), notably "bad sectors". Unreliable RAM, in particular, is deadly as far as software is concerned, and anything other than a 100% clear memory test result is cause for concern. Unfortunately, even a 100% clear result from the diagnostics utilities does not guarantee that the RAM is free from defects - only that none were encountered during the test passes.

7) As the last of the non-invasive troubleshooting steps, perform a "vanilla" reinstallation of Windows: just the OS itself without any additional applications, games, utilities, updates, or new drivers - NOTHING AT ALL that is not sourced from the Windows 7 disc. Should that fail to mitigate the 0x124 problem, jump to the next steps. Otherwise, if you run the "vanilla" installation long enough to convince yourself that not a single 0x124 crash has occurred, start installing updates and applications slowly, always pausing between successive additions long enough to get a feel for whether the machine is still free from 0x124 crashes. Should the crashing resume, obviously the very last software addition(s) may be somehow linked to the root cause.
If stop 0x124 errors persist despite the steps above, and the harware is under warranty, consider returning it and requesting a replacement which does not suffer periodic MCE events. Be aware that attempting the subsequent harware troubleshooting steps may, in some cases, void your warranty:
8) Clean and carefully remove any dust from the inside of the machine. Reseat all connectors and memory modules. Use a can of compressed air to clean out the RAM DIMM sockets as much as possible.

9) If all else fails, start removing items of hardware one-by-one in the hope that the culprit is something non-essential which can be removed. Obviously, this type of ... Read more

http://www.sevenforums.com/bsod-help-support/221147-bsod-0x00000124.html
Relevancy 49.88%

Hi I just recently got my PC and have had these randomn BSOD's with the same error code and drivers listed. I have tried searching around but solutions and discussions have been a bit unique to other people's problems. I may have missed it somewhere so I do apologise in advance for any duplication. Anyway in summary the error code is 0x00000124 and always says it's related to ntoskrnl.exe and hal.dll.
The latest dump file became different when I switched on Driver verifier and selected only the 2 drivers above and I went into an infinite loop of BSOD's of which I only stopped by loading the last known good settings.

Additionally I have also got the PERFMON and Jcgriff2 files as instructed by the BSOD posting help.

Hope someone can shed some light on this. Generally the BSOD tends to happen as I am gaming and randomnly.

Thanks

Nik

A:BSOD 0x00000124

The 2 files that are mentioned are core Windows files.
They are protected by the system file checker also.
As such, if you were having problems with them, you'd have many more issues than just the occasional BSOD.
It's most likely that another, 3rd party driver is causing these Windows files to crash.

A STOP 0x124 error is primarily a hardware error - but it can be caused by compatibility issues, low-level driver problems, or even by malware. Here's some info on it: BSOD Index and here's a link to some suggested troubleshooting procedures: Stop 0x124 - what it means and what to try - Windows 7 Forums

FWIW - here's a link on how I suggest using Driver Verifier: Driver Verifier Settings But I generally don't recommend using it on STOP 0x124 errors (although it can't hurt if you take precautions).

More to follow when I finish analyzing the dump files.....

http://www.techsupportforum.com/forums/f299/bsod-0x00000124-625987.html
Relevancy 49.88%

Hi This is my first BSOD 0x00000124 With time using any forum but I really need help to resolve this problem I'm a pc BSOD With 0x00000124 noob of some sort I've recently bought a budget gaming pc and I'm upgrading it part by part Current System Spec AMD Phenom II X T GB DDR ASROCK N C-S UCC Corsair TX ATI GB Alot of these parts are pretty new less than months old the system was working with this hardware fine for about a month or so then I started getting BSOD while playing BF on ultra settings only when I turned my settings down to medium I was able to play for longer But now the BSOD has gotten worse and I now get it while on the desktop listening to music on media player and watching youtube videos My first thought as a noob novice was to reinstall windows so I changed my OS from windows ultimate x to windows ultimate x but the problem persist I know how to find c windows minidumps but for some reason when I go to attach the DMP files here it won't let me it says you do not have permission to open this file even though I'm the only administrator on my system

A:BSOD With 0x00000124

Hello there. You can find more infor for that error here: Stop 0x124 - what it means and what to try

And, for the dump files... .dmp file is not allowed to attach here. First you'll need to put them in .zip(.rar) archive and then you'll be able to attach them.

http://www.sevenforums.com/bsod-help-support/204983-bsod-0x00000124.html
Relevancy 49.88%

This happened when quitting the Crysis demo I've been having similar crashes BsOD: 0x00000124 for a while I've overclocked my CPU GPU and graphics memory before but none BsOD: 0x00000124 of it is currently overclocked OS Vista Home Premium x CPU C Q Q Motherboard XFX i LT SLI Memory GB OCZ DDR - MHz Graphics Card Palit GT Super GB Hard Drives x BsOD: 0x00000124 Maxtor GB SATA-II A picture of the error Sorry it's a little blurry Here's what WinDbg gave me from Memory dmp Code WHEA UNCORRECTABLE ERROR A fatal hardware error has occurred Parameter identifies the type of error source that reported the error Parameter holds the address of the WHEA ERROR RECORD structure that describes the error conditon Arguments Arg MCA ASSERT Arg fffffa c e Address of WHEA ERROR RECORD structure Arg b High bits of MCi STATUS MSR for the MCA bank that had the error Arg Low bits of MCi STATUS MSR for the MCA bank that had the error Debugging Details ------------------ WHEA ERROR RECORD errrec fffffa c e BUGCHECK STR x GenuineIntel CUSTOMER CRASH COUNT DEFAULT BUCKET ID VISTA DRIVER FAULT PROCESS NAME System CURRENT IRQL f STACK TEXT fffffa a fffff e f a fffffa c e b nt KeBugCheckEx fffffa a fffff f b hal HalBugCheckSystem x e fffffa a d fffff e f fffffa c e fffffa abb fffffa ac nt WheaReportHwError x fffffa aa fffff ea f fffffa ac fffffa f f hal HalpMcaExceptionHandler xf fffffa aa fffff ea nt KxMcheckAbort x fffffa abb fffffa d c nt KiMcheckAbort xf fffffa aae acpi DefPortReadAcpiRegister x STACK COMMAND kb FOLLOWUP NAME MachineOwner MODULE NAME hardware IMAGE NAME hardware DEBUG FLR IMAGE TIMESTAMP FAILURE BUCKET ID X x GenuineIntel BUCKET ID X x GenuineIntel Followup MachineOwner --------- The quot X x GenuineIntel quot makes it seem like there's an issue with my CPU Also Windows told me that the problem was caused by my CPU when I told it to check for a solution Does anyone have any ideas

A:BsOD: 0x00000124

Sorry to say but the easiest way to fix it is to rebuild. I had the same problem and tried for weeks to fix. Reinstall and all is well.

http://www.vistax64.com/crashes-debugging/168226-bsod-0x00000124.html
Relevancy 49.88%

Hello!
 
25th of August I started getting 0x00000124 BSODs. I tried swapping out my new video card for old, it worked and I RMAed my new one.
One month later I started getting exactly same BSOD, 0x00000124. I'm still using my old video card, new one still at RMA. I've done Prime95 for few hours and no issues. I'm gonna do Memtest86 now.
 
When PC BSODs, I don't see actual BSOD, screen goes greygreenish with black and white lines, sound looping and few seconds later It restarts (i've disabled automatic restart when bsod). RAM,MB,CPU are few months old only.
 
I'm suspecting MB or PSU cause I have another issue. When I cold boot, sometimes only fans turn on, mobo stays off till I hit restart button.
 
 
PC specs:
ASrock 980de3/u3s3
AMD FX-6300
Ati Radeon HD 3870
HyperX Fury Blue 8gb
Chieftec CTG-500-80p

http://www.bleepingcomputer.com/forums/t/628979/bsod-0x00000124/
Relevancy 49.88%

Hello!

End of August, I started getting 0x00000124 BSODs, first 2 I got playing during TERA. Later on I didn't get any more BSODs while gaming, only during cold boot/restart/idling. After extensive googling and investigating I was left with opening PC and checking cables, reseating components. Cables were fine and then I started reseating, nothing changed. I still had my old GPU and tried swapping out, it worked and got no more BSODs for a week. I RMAed my new card.

~3 weeks later with my old GPU, same BSOD popped up while playing TERA. I haven't received any more BSODs while writing this thread.

PSU is quite old, Chieftec CTG-500-80p

http://www.sevenforums.com/bsod-help-support/401347-bsod-0x00000124.html
Relevancy 49.88%

Hey everybody Let me say something first I'm sorry But my english is not that good I'll try to write it good etc but I have Dyslexia i can't without a problem my own language dutch So like I said I'll try And I hope you can read it So let me explain the Bsod 0x00000124 problem I have while I'm gaming al the time the bsod x I've done a little bit of researche but I can't find any solution So let me give my specs first Intel Core i on water Evga P FTW msi hawk Sli Corsair Nova gb SSD Raid- WD GP TB Cooler Master silent pro watt I had the proc first overklocked ghz but it was intel burn test Bsod 0x00000124 and prime stable so that couldn't be the problem but I have deleted the overklock so it couldn't be the problem at all I have updated my bios of my motherboard I have updated my drivers I have done everything And that couldn't fixed the problem So have anywone an idea Please let me know Thanx

A:Bsod 0x00000124

  
Quote: Originally Posted by Levietje1234


Hey everybody!

Let me say something first, I'm sorry... But my english is not that good! I'll try to write it good etc. but I have Dyslexia, i can't without a problem my own language dutch.. So like I said, I'll try.. And I hope you can read it!

So, let me explain the problem!

I have while I'm gaming al the time the bsod 0x00000124. I've done a little bit of researche but I can't find any solution!

So let me give my specs first:
Intel Core i7 860 on water
Evga P55 FTW
msi 460 hawk Sli
Corsair Nova 32gb SSD Raid-0
WD GP 1TB
Cooler Master silent pro 850watt

I had the proc. first overklocked @4ghz, but it was intel burn test and prime95 stable, so that couldn't be the problem, but I have deleted the overklock, so it couldn't be the problem at all!

I have updated my bios of my motherboard, I have updated my drivers,... I have done everything! And that couldn't fixed the problem!

So have anywone an idea? Please, let me know !!

Thanx!



Your .dmp file shows a stop error of 0x124 which is a general hardware error .

A "stop 0x124" is fundamentally different to many other types of bluescreens because it stems from a hardware complaint.

Stop 0x124 minidumps contain very little practical information, and it is therefore necessary to approach the problem as a case of hardware in an unknown state of distress.

You can read more on this error and what to try here... Stop 0x124 - what it means and what to try Stop 0x124 - what it means and what to try

http://www.sevenforums.com/bsod-help-support/177723-bsod-0x00000124.html
Relevancy 49.88%

Halp!

I have a recurrent BSOD, and it hits when my PC is just on the desktop doing nothing really. I think something might be up with the CPU but I've stress tested with Prime95 (ran ok for c.5 hours), and the temps are fine according to Speedfan. I can't seem to get the Windows debugger to download so I've not really be able to examine it in much detail but I've attached files below.

Any help would be MUCH appreciated
Minty

Edit: Got Windows Debugger to work... It says:

BugCheck 124, {0, fffffa800ee9a028, be000000, 800400}
Probably caused by : GenuineIntel
Followup: MachineOwner

http://www.sevenforums.com/bsod-help-support/379805-bsod-0x00000124.html
Relevancy 49.88%

hi Im getting a bsod just browsing folding home playing something or pc is just idle Components are maybe one month old I dont have any ideas tried everything already Fresh windows and all drivers installed i - k stock cooler Asus z -A Corsair RM x SSD Adata SP gb HDD gb HDD gb HDD gb Ram Kingston DDR GB Complete info https www dropbox com s myhrf zdis - - zip kd gt analyze -v Bugcheck Analysis WHEA UNCORRECTABLE ERROR A fatal hardware error has occurred Parameter identifies the type of error source that reported the error Parameter holds the address of the WHEA ERROR RECORD structure that describes the error 0x00000124 BSOD conditon Arguments Arg Machine Check Exception Arg ffffe d Address of the WHEA ERROR RECORD structure Arg bf High order -bits of the MCi STATUS value Arg Low order -bits of the MCi STATUS value Debugging Details ------------------ BUGCHECK STR x GenuineIntel CUSTOMER CRASH COUNT DEFAULT BUCKET ID WIN DRIVER FAULT PROCESS NAME System CURRENT IRQL f ANALYSIS VERSION debuggers dbg - amd fre STACK TEXT ffffd e df fffff f c ffffe d bf nt KeBugCheckEx ffffd e e fffff f fc ffffe BSOD 0x00000124 ddede ffffe ddede ffffe d hal HalBugCheckSystem xcf ffffd e e BSOD 0x00000124 fffff f c c ffffd e a nt WheaReportHwError x d ffffd e ea fffff f c a ffffe ffffe ddede ffffd e a ffffe ddede hal HalpMcaReportError x ffffd e ff fffff f c f ffffe dde hal HalpMceHandlerCore xe ffffd e a fffff f c b e hal HalpMceHandler xe ffffd e a fffff f c cd ffffe dde ffffd e a b hal HalpMceHandlerWithRendezvous xce ffffd e a b fffff f f eabb hal HalHandleMcheck x ffffd e a e fffff f f e fffff f f e f nt KxMcheckAbort x b ffffd e a fffff ee d nt KiMcheckAbort x ffffd e a e intelppm MWaitIdle x STACK COMMAND kb FOLLOWUP NAME MachineOwner MODULE NAME GenuineIntel IMAGE NAME GenuineIntel DEBUG FLR IMAGE TIMESTAMP IMAGE VERSION FAILURE BUCKET ID x GenuineIntel PROCESSOR CACHE BUCKET ID x GenuineIntel PROCESSOR CACHE ANALYSIS SOURCE KM FAILURE ID HASH STRING km x genuineintel processor cache FAILURE ID HASH c f f e- af -ed b-df -d b dfa Followup MachineOwner

A:BSOD 0x00000124

Only 23 Windows Updates installed. Most systems have 60 or more. Please visit Windows Update and get ALL available updates (it may take several trips to get them all).

Don't worry about the specific number, it's just important that you have checked and installed any updates that were available.

E: drive only has about 0.7% free space. Windows likes 15% free space in order to perform stuff "behind the scenes" without adversely affecting the system's performance. Please free up 15% on ALL hard drives (you can get away with 10% on larger drives and won't notice a large performance penalty)

This device has problems in Device Manager:





High Definition Audio Device HDAUDIO\FUNC_01&VEN_8086&DEV_2807&SUBSYS_80860101&REV_1000\4&3659EE06&0&0001 This device cannot start.



It's your Intel High Definition Audio. Please uninstall it, then download and install the latest, Win8.1 compatible version from the manufacturer's website

MSI Afterburner (along with Riva Tuner and EVGA Precision) are known to cause BSOD's in some Windows systems (it's driver is usually RTCore64.sys). Please un-install MSI Afterburner and Riva Tunere immediately!

If you're overclocking, please stop the overclock while we're troubleshooting. Feel free to resume the overclock once the system has been stabilized.

I've seen BSOD issues w/Screaming Bee audio in the past, but nothing recently (but your drivers date from 2010). To test, please temporarily uninstall it to see if it helps stop the BSOD's

If all of this doesn't work, then we've gotta wonder about hardware issues.
Double check all of your connections - as they can cause BSOD's also (I had a Dell with a large video card that did this until I reseated the card).
Then start with these free diagnostic tests: Hardware Diagnostics

Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable! :

You may not find an update for this one, just let us know if that's the case:
AsUpIO.sys Mon Aug 2 22:47:59 2010 (4C57835F)
ASUS hardware monitoring software related
http://www.carrona.org/drivers/driver.php?id=AsUpIO.sys

DO NOT remove this one, only update it:
ASUSFILTER.sys Tue Sep 20 11:46:33 2011 (4E78B559)
ASUS USB Hub filter driver
http://www.carrona.org/drivers/driver.php?id=ASUSFILTER.sys


Analysis:
The following is for informational purposes only.

Code:
**************************Mon Jun 2 06:52:56.424 2014 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\060214-9062-01.dmp]
Windows 8 Kernel Version 9600 MP (8 procs) Free x64
Built by: 9600.17041.amd64fre.winblue_gdr.140305-1710
System Uptime:0 days 0:44:56.062
*** ERROR: Module load completed but symbols could not be loaded for intelppm.sys
Probably caused by :GenuineIntel
BugCheck 124, {0, ffffe00036d26028, bf800000, 124}
BugCheck Info: WHEA_UNCORRECTABLE_ERROR (124)
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: ffffe00036d26028, Address of the WHEA_ERROR_RECORD structure.
Arg3: 00000000bf800000, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000000000124, Low order 32-bits of the MCi_STATUS value.
BUGCHECK_STR: 0x124_GenuineIntel
PROCESS_NAME: System
FAILURE_BUCKET_ID: 0x124_GenuineIntel_PROCESSOR_CACHE
CPUID: "Intel(R) Core(TM) i7-4770K CPU @ 3.50GHz"
MaxSpeed: 3500
CurrentSpeed: 3506
BIOS Version 1802
BIOS Release Date 01/28/2014
Manufacturer ASUS
Product Name All Series
??????????????????????????????????????????????????????????????????????????????????????``
**************************Mon Jun 2 06:07:36.950 2014 (UTC - 4:00)**************************
Load... Read more

http://www.eightforums.com/bsod-crashes-debugging/47376-bsod-0x00000124.html
Relevancy 49.88%

Hello my fellow computer geeks I have encountered my first BSOD on my first computer built I apologize for sounding like an amateur as it is my first time dealing with BSOD 0x00000124 this problem Problem So one day I start my computer and it blue screens with the STOP error x I assume it's the BIOS so I update it But I also notice that the hard drive with the OS Windows Ultimate -bit is not detected so I BSOD 0x00000124 take out all of the hard drives and put in a brand new one with the intention of reformatting my computer and installing Windows Home -bit However when I boot my CD drive to install the OS the BSOD pops up after loading the initial black Windows loading screen appears So I am left with an unfortunate problem I have a computer BSOD 0x00000124 without an OS that blue screens every time I boot to try to install the OS Treaments I've reset the CMOs by taking out the battery and updated with the latest BIOs I've stripped the computer to the bare minimum hard drive cd-drive mobo graphics card Specs ASUS Sabertooth X LGA Intel X SATA Gb s CORSAIR CMPSU- TX W ATX V v CORSAIR XMS GB x GB -Pin DDR SDRAM DDR PC Intel Core i - Bloomfield GHz x KB L Cache MB L Cache LGA MSI R Hawk Radeon HD GB -bit GDDR PCI Express x Samsung TB Hard Drive CD DVD drive of some brand I figure that this and the hard drive are not really relevant Any help would be greatly appreciated as I cannot run any diagnostic test since the OS is non-existent

A:BSOD 0x00000124

  
Quote: Originally Posted by mm0d2010


Hello my fellow computer geeks.

I have encountered my first BSOD on my first computer built. I apologize for sounding like an amateur as it is my first time dealing with this problem.

Problem:
So, one day I start my computer and it blue screens with the STOP error 0x00000124. I assume it's the BIOS so I update it. But, I also notice that the hard drive with the OS (Windows 7 Ultimate 64-bit) is not detected so I take out all of the hard drives and put in a brand new one with the intention of reformatting my computer and installing Windows 7 Home 64-bit.

However, when I boot my CD drive to install the OS, the BSOD pops up after loading the initial black Windows loading screen appears.

So, I am left with an unfortunate problem. I have a computer without an OS that blue screens every time I boot to try to install the OS.

Treaments:
I've reset the CMOs by taking out the battery and updated with the latest BIOs
I've stripped the computer to the bare minimum (1 hard drive, 1 cd-drive, mobo, graphics card).

ASUS Sabertooth X58 LGA 1366 Intel X58 SATA 6Gb/s
CORSAIR CMPSU-750TX 750W ATX12V v2.2
CORSAIR XMS3 6GB (3 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800)
Intel Core i7-950 Bloomfield 3.06GHz 4 x 256KB L2 Cache 8MB L3 Cache LGA 1366
MSI R5770 Hawk Radeon HD 5770 1GB 128-bit GDDR5 PCI Express 2.1 x16
Samsung 1TB Hard Drive
CD/DVD drive of some brand (I figure that this and the hard drive are not really relevant).

Any help would be greatly appreciated as I cannot run any diagnostic test since the OS is non-existent.



These assume desktop, if laptop dont.

A couple more things to try.

Pull all the ram but one stick

Try booting from the OS dvd with the HD removed

Unplug the DVD player

Your .dmp file shows a stop error of 0x124 which is a general hardware error .

A "stop 0x124" is fundamentally different to many other types of bluescreens because it stems from a hardware complaint.

Stop 0x124 minidumps contain very little practical information, and it is therefore necessary to approach the problem as a case of hardware in an unknown state of distress.

You can read more on this error and what to try here... Stop 0x124 - what it means and what to try Stop 0x124 - what it means and what to try

http://www.sevenforums.com/bsod-help-support/169849-bsod-0x00000124.html
Relevancy 49.88%

Not sure what this could be, Hard drive, Power supply, GPU? I have uploaded the debug file, Please help me if possible.
CPU: i7-4770k

MoBo: z97-A

GPU(s): SLI Asus Strix 970s

RAM: 32GB trident X 1866Mhz

Hard drives: PCI-e RADIR express 240GB / 2TB Seagate Hybrid

Cooler: Nepton 240m

Power Supply: Cooler Master 1200w Silent Pro Gold

A:BSOD 0x00000124 Over and Over

If you need anything else from me , please let me know

http://www.sevenforums.com/bsod-help-support/365534-bsod-0x00000124-over-over.html
Relevancy 49.88%

My Girlfriend has recently bought a BSOD 0x00000124 reconditioned laptop from PC worlds clearance store and it is getting the BSOD and a fuzzy screen see attachments I can't say that BSOD 0x00000124 I have noticed any particular pattern with the blue screen but the fuzzy screen seems to happen every time I try to go on youtube and also randomly when idle Since I started to write this post on my other computer the laptop seems to refuse to blue screen all I can get is the fuzzy screen What I did manage to write down from my BS errors is x xFFFFFA CAD x F x A x Its a Toshiba Satalite l D- AMD Athlon Dual-Core QL- Ghz Gb Ram I have the same laptop so I have tried substituting the ram and hard drive but it still blue screens and I have stressed the CPU and it actually stayed on for hours longest yet I also tried testing the ram but it wont stay on long enough for the test to complete Any help would be greatly appreciated Thanks Dan

A:BSOD 0x00000124

  
Quote: Originally Posted by Danielb3


My Girlfriend has recently bought a reconditioned laptop from PC worlds clearance store and it is getting the BSOD and a fuzzy screen (see attachments). I can't say that I have noticed any particular pattern with the blue screen but the fuzzy screen seems to happen every time I try to go on youtube and also randomly when idle.
Since I started to write this post on my other computer the laptop seems to refuse to blue screen all I can get is the fuzzy screen.

What I did manage to write down from my BS errors is:
0x0000124
0xFFFFFA8004CAD038
0x00000000F60020000
0x000000000000017A
0x0000000000000000

Its a Toshiba Satalite l450D-128
AMD Athlon Dual-Core QL-64 2.1Ghz
4Gb Ram

I have the same laptop so I have tried substituting the ram and hard drive but it still blue screens and I have stressed the CPU and it actually stayed on for 6+ hours (longest yet) I also tried testing the ram but it wont stay on long enough for the test to complete.

Any help would be greatly appreciated
Thanks
Dan



Your .dmp file shows a stop error of 0x124 which is a general hardware error .

A "stop 0x124" is fundamentally different to many other types of bluescreens because it stems from a hardware complaint.

Stop 0x124 minidumps contain very little practical information, and it is therefore necessary to approach the problem as a case of hardware in an unknown state of distress.

Some generic advice.

If you are overclocking STOP. return to the default settings at least for now.
If you are running a RAID update its driver.
You can read more on this error and what to try here... Stop 0x124 - what it means and what to try

http://www.sevenforums.com/bsod-help-support/196558-bsod-0x00000124.html