Windows Support Forum

BSOD memory management, ntoskrnl.exe+75bc0

Q: BSOD memory management, ntoskrnl.exe+75bc0

This has been happening quite a lot recently so i ran a whole bunch of diagnostic tests thinking maybe it was the ram but that turned up nothing, after viewing the crash reports in bluescreenview i determined it could possibly be a software issue so i did a fresh install of windows. It was going fine for a few months but now it has started again and is driving me nuts!! please help

much appreciated

Andrew

full reports attached

basic problem below:

BUG CHECK STRING: MEMORY_MANAGEMENT
BUG CHECK CODE: 0X0000001a
CAUSED BY DRIVER: ntoskrnl.exe
CAUSED BY ADDRESS: ntoskrnl.exe+75bc0

Relevancy 100%
Preferred Solution: BSOD memory management, ntoskrnl.exe+75bc0

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: BSOD memory management, ntoskrnl.exe+75bc0

does ANYONE know ANYTHING about this??

http://www.sevenforums.com/bsod-help-support/320921-bsod-memory-management-ntoskrnl-exe-75bc0.html
Relevancy 95.48%

I have had an ongoing issue on my PC with Memory Management.  I have tried updating the firmware on my BIOS,  I have disabled unneeded drivers and updated as many as I could find updates for.  I have popped and swapped my two 4GB memory modules.  I did download Memtest but I have not yet created the bootable cd to run it.  I have uninstalled Comodo AV and replace with MS Security Essentials.  AV and MalwareBytes scans are clean.  I have been running BlueScreenView but it only points to ntoskrnl.exe
 
0x0000001a
ntoskrnl.exe+75bc0
 
Any assistance in helping me narrow down the cause of my Bluescreen would be greatly appreciated. 
 
 

A:BSOD Memory Management - 0x0000001a ntoskrnl.exe+75bc0

Please download MiniToolBox  , save it to your desktop and run it.
 Checkmark the following checkboxes:  List last 10 Event Viewer log  List Installed Programs  List Users, Partitions and Memory size.
 Click Go and paste the content into your next post.
 Also...please Publish a Snapshot using Speccy - http://www.bleepingcomputer.com/forums/topic323892.html/page__p__1797792#entry1797792 , taking care to post the link of the snapshot in your next post.
 
Louis

http://www.bleepingcomputer.com/forums/t/536079/bsod-memory-management-0x0000001a-ntoskrnlexe75bc0/
Relevancy 92.02%

Hi to make things easier for you dxgmms1.sys,ntoskrnl.exe,Ntfs.sys BSOD Address:ntoskrnl.exe+75bc0; below is the Bug Check String Driver and crash address SYSTEM SERVICE EXCEPTION dxgmms sys ntoskrnl exe bc MEMORY MANAGEMENT ntoskrnl exe ntoskrnl exe bc SYSTEM SERVICE EXCEPTION ntoskrnl exe ntoskrnl exe bc NTFS FILE SYSTEM Ntfs sys ntoskrnl exe bc IRQL NOT LESS OR EQUAL ntoskrnl exe ntoskrnl exe bc unrelated how could I make nice table above I have searched the forum Problem BSOD randomly usually graphics related eg flash games in chrome graphics related software Mathematica Problem I use an internet usb G device to connect to internet Every morning the device will not connect to internet and computer will hang on shutting down screen when I BSOD Address:ntoskrnl.exe+75bc0; dxgmms1.sys,ntoskrnl.exe,Ntfs.sys restart I have to manually turn off and back on again I think this may be a dying capacitor on motherboard that needs boot's to get excited Problem Chrome quot aw snap quot happens regularly and is usually flash content related even ad banners seem to cause it from time to time I have reinstalled chrome checked plugins etc etc no luck Internet explorer runs stable but for example in flash games it seems to momentarily freeze and then catch up BSOD Address:ntoskrnl.exe+75bc0; dxgmms1.sys,ntoskrnl.exe,Ntfs.sys with itself again These are moments where I think chrome would have crashed Things I've done SFC scan All's well Memtest I did pass it took an hour everything fine Will put it on over night tonight Checked for latest drivers Also have latest BIOS Checked win update Ran Intel Burn everything ok max stress over Gb RAM run min max temp thank you Noctua NH-C P this is with quiet adaptor too lol Ran malwarebytes found nothing toxic Ran SSDlife Free health SSD seems fine Bought a new motherboard assuming that the current one is going bad I haven't switched over to it yet and thought I should investigate a little further before I do ie bad RAM CPU Power Supply SSD CPU seems fine RAM passed test but will test further My own quot opinion quot until today was that there is a fault on motherboard probably with usb hardware Now I realise that it could be the power supply but I have no way to test this bar buy a new one My analysis bad motherboard or bad PSU Either way not getting away with cheap fix methinks UPDATE I enabled verifier exe using this Driver Verifier - Enable and Disable Windows crashes just before going to desktop I had to boot last known config to get up and running again IE I CAN RELIABLY CREATE BSOD USING VERIFIER EXE WITH GIVEN INSTRUCTIONS So I am going to try focusing on drivers loaded at startup by process of elimination Is there a quick way to find out which one Below is the Check String Driver and crash address for the BSOD's when using verifier exe IRQL NOT LESS OR EQUAL ntoskrnl exe ntoskrnl exe bc DRIVER IRQL NOT LESS OR EQUAL RNDISMPX SYS RNDISMPX SYS a UPDATE If I choose or more non Microsoft drivers in verifier exe I get BSOD different check strings but always at the same address Also computer seems more unstable since engaging with verifier exe I feel I have given a thorough evaluation based on information in this forum and would appreciate feedback from those with more expertise than I UPDATE Another Memtest gave errors on pass Questions any chance poor power supply can cause this anyone have experience increasing voltage to make this go away would bad RAM explain all my problems ok fine i'll go through RAM and the slots and find the bad one sigh major sigh positively tragic sigh UPDATE Started with slot with stick of RAM Did memtest but had an idea I turned on verifier exe with all rd party drivers selected and my theory was to replicate the BSOD I got earlier at startup Went through each slot each RAM combo's of RAM and then to add insult to injury with all sticks in exactly same as before no BSOD Life is tough So maybe RAM wasn't properly seated all this time or maybe I need to test the RAM proper... Read more

A:BSOD Address:ntoskrnl.exe+75bc0; dxgmms1.sys,ntoskrnl.exe,Ntfs.sys

**************UPDATE 5 ****************




The sequence of events went as follows.
RAM test 1 pass was passed. Verifier.exe caused immediate BSOD on windows start when activated. Trying to hunt down drivers revealed any combo of 3 or more drivers gave BSOD at startup. Randomly decided to recheck RAM. Failed memtest after 27 minutes pass 1. Found one RAM stick that passed after one pass slot0. Got fed up of waiting for other slot's. Devised a plan to use verifier to check the RAM by seeing which combo's of RAM sticks gave BSOD on startup. All combo's passed. And now verifier does not give BSOD on any setting. Began to hate life. Cheered myself up with prospect of sleep. Put all 16 Gb RAM in properly and ran mentest for 18 hours, 6 passes. No error. Still no verifier.exe errors when enabled. Wrote this update.


If RAM failed after 27min one test, and then after swapping around a retest of 18 hours has no error, one would presume the RAM may be ok. Equally, I believe one could say the RAM is suspect. So, if the test is failed it really doesn't tell us anything except there is a problem somewhere. But we know there is a problem since we have BSOD!!! If I hadn't rerun the test I wouldn't question the RAM.

So the question is: how do I categorically ensure that a stick of RAM is good? Is memtest on RAM with an alternative working computer enough?



In summary:

I ran memtest for 18 hours, which was 6 passes. No problems detected. Using verifier.exe with protocols given on this forum I no longer get BSOD.

Currently my hypothesis is that the RAM was never seated correctly, or given that it takes a bit of force to insert correctly into motherboard, the flexing has at least temporarily defused whatever fault was causing my BSOD. Tenuous I know. But I really have no other explanation other than something somewhere on the motherboard or power is failing, or even the RAM.

http://www.sevenforums.com/bsod-help-support/351171-bsod-address-ntoskrnl-exe-75bc0-dxgmms1-sys-ntoskrnl-exe-ntfs-sys.html
Relevancy 91.16%

HP Envy xxx i - QM AMD Radeon HD M -inch diagonal Radiance Full HD GB DDR bit Win GB Hybrid HDD Hey Guys I just recently got a fairly new laptop from HP I've been using it from about months ntoskrnl.exe - Management Memory BSOD - so far The harddrive was one that came from my previously laptop Envy but I just uninstalled all related OS drivers and files and re installed all OEM programs from HP The laptop ran smoothly but openGL seemed to be a problem for a bit so I installed the BETA ATI drivers They worked wonderfully until about BSOD - ntoskrnl.exe - Memory Management days ago when I stared getting a quot MEMORY MANAGEMENT quot BSOD It happens irregularly but mostly when coming out of sleep or turning the computer on It seems to not happen on the intel GPU but I am not sure that that is the problem Anyways I'm back on the default display drivers but I still occasionally get this crash Any ideas Thanks in advance

A:BSOD - ntoskrnl.exe - Memory Management

Crashes are pointing to memory problems or driver conflicts.If you are overclocking any hardware, please stop.

Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).


   Warning
Before you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. WARNING: The steps that follow can void your warranty!!!

For Part 3: If You Have Errors: If you swap any memory components, follow these steps for ESD safety:Shut down and turn off your computer.
Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working. If you do not have an anti-static workbench, desk, or pad, you can use your computer tower/case by finding a metal hold in it, such as a drive bay.
Once these steps have been followed, it is safe to remove and replace components within your computer.

An underlying driver may be incompatible\conflicting with your system. Run Driver Verifier to find any issues. To run Driver Verifier, do the following:a. Backup your system and user files
b. Create a system restore point
c. If you do not have a Windows 7 DVD, Create a system repair disc
d. In Windows 7:Click the Start Menu
Type verifier in Search programs and files (do not hit enter)
Right click verifier and click Run as administrator
Put a tick in Create custom settings (for code developers) and click next
Put a tick in Select individual settings from a full list and click next
Set up the individual settings as in the image and click next
Attachment 218046
Put a tick in Select driver names from a list
Put a tick next to all non-Microsoft drivers.
Click Finish.
Restart your computer.

If Windows cannot start in normal mode with driver verifier running, start in safe mode. If it cannot start in safe mode or normal mode, restore the system restore point using System Restore OPTION TWO.

If you are unable to start Windows with all drivers being verified or if the blue screen crashes fail to create .dmp files, run them in groups of 5 or 10 until you find a group that causes blue screen crashes and stores the blue screen .dmp files. The idea with Verifier is to cause the system to crash, so do the things you normally do that cause crashes. After you have a few crashes, upload the crash reports for us to take a look and try to find patterns.

When you are ready to disable Verifier: Start Menu -> All Programs -> Accessories -> Right click Command Prompt -> Run as administrator -> Type the following command and then Enter:verifier /reset-> Restart your computer.

http://www.sevenforums.com/bsod-help-support/236626-bsod-ntoskrnl-exe-memory-management.html
Relevancy 88.15%

Hey guys,

I'm having a problem with constant bluescreens on my Dell E6430. After looking at some logs, I figured that it was a bad chipset. I reinstalled the chipset, but I'm still getting BSOD. I'm scared that I'm going to have to wipe this harddrive and start fresh... So I'm looking for any opinions/advice. I've attached the System Info, but if you want to take a look at some dump logs, just ask.

Thanks!

- Cougar

A:BSOD - ntoskrnl.exe - Minidump sites Memory management and NTFS

If you want to get your issue debugged, you need to post it following the Blue Screen of Death (BSOD) Posting Instructions.

http://www.sevenforums.com/bsod-help-support/300647-bsod-ntoskrnl-exe-minidump-sites-memory-management-ntfs.html
Relevancy 88.15%

Hi guys,

This is my first time posting on a forum like this so go easy!

I'm having issues with my Windows 7 Ultimate 64 bit PC. Every so often it will just BSOD on me. I've had a look at the errors and it mentions MEMORY_MANAGEMENT and ntoskrnl.exe, but i don't really know what i'm doing so i figured i'd get some REAL help. I've recently installed new graphic drivers, hoping that might help but it just crashed on me again.

Windows was pre installed on the machine and the machine itself is only a year old.

I'll attach the zip file with everything as mentioned in the BSOD post and we'll see how we go.

Thanks in advance!

A:Constant random BSOD, related to ntoskrnl and MEMORY MANAGEMENT

Related to MOBK.sys Change Monitor Filter Driver from Mozy, Inc. Yours from 2009. I would update to current or remove.

http://www.sevenforums.com/bsod-help-support/230127-constant-random-bsod-related-ntoskrnl-memory-management.html
Relevancy 88.15%

Hi Guys I would greatly appreciate your insight into bsod's New - management multiple build RecFltr.sys,ntoskrnl.exe,memory some problems I am having with New build - multiple bsod's RecFltr.sys,ntoskrnl.exe,memory management a new build I am an IT systems engineer so be as technical as you like with the replies I'd apprecaite them I recently decided to upgrade my build and bought a nice kit and graphics card as outlined below ASUSTeK Computer INC M A LT-M-LE AM AMD Athlon II X GB Dual-Channel DDR ATI Radeon HD I installed windows ultimate bit and installed all the latest drivers for the system The problem is that I have had multiple blue screens since I built it one week ago I ran memtest and windows memory diagnostic tool and both identified memory errors I don't overclock but I got the OCCT stability tester and it identified problems in the cores I do know though that these errors can be caused by other problems and wanted to get yer opinion on the mini dumps which I have attached I ran the driver verifier and that immediately caused blue screens for RecFltr sys My parts are all under warranty so do you think its hardware or driver New build - multiple bsod's RecFltr.sys,ntoskrnl.exe,memory management based I appreciate the insight and second third and fourth opinions New build - multiple bsod's RecFltr.sys,ntoskrnl.exe,memory management if we can get them Thanks

A:New build - multiple bsod's RecFltr.sys,ntoskrnl.exe,memory management

  
Quote: Originally Posted by jiraiya


Hi Guys,
I would greatly appreciate your insight into some problems I am having with a new build. I am an IT systems engineer so be as technical as you like with the replies, I'd apprecaite them. I recently decided to upgrade my build and bought a nice kit and graphics card as outlined below.

ASUSTeK Computer INC. M4A78LT-M-LE (AM3)
AMD Athlon II X4 645
4.00 GB Dual-Channel DDR3
ATI Radeon HD 5770

I installed windows 7 ultimate 64 bit and installed all the latest drivers for the system. The problem is that I have had multiple blue screens since I built it one week ago. I ran memtest86+ and windows memory diagnostic tool and both identified memory errors. I don't overclock but I got the OCCT stability tester and it identified problems in the cores. I do know though that these errors can be caused by other problems and wanted to get yer opinion on the mini dumps which I have attached. I ran the driver verifier and that immediately caused blue screens for RecFltr.sys. My parts are all under warranty so do you think its hardware or driver based. I appreciate the insight and second, third and fourth opinions if we can get them.
Thanks.


These were both verified and Related to RecFltr.sys from Microsoft Reclusa gaming keyboard, powered by Razer?. I would re-install the driver with newest.


I would also re-run memtest.

http://www.sevenforums.com/bsod-help-support/172817-new-build-multiple-bsods-recfltr-sys-ntoskrnl-exe-memory-management.html
Relevancy 86.86%

Hi,

For the past couple moths my computer has been bluescreening due to ntoskrnl.exe +75bc0.
It happens randomly sometimes when I'm playing a game other times when I'm watching youtube or a stream.

Any help would be appreciated.

A:BSOD ntoskrnl.exe +75bc0

Code:
BugCheck A, {fffff68000109008, 0, 0, fffff80002da83b6}
This bugcheck means that pageable memory was referenced at an IRQL too high. This is an illegal operation as pageable memory can only be referenced at IRQL 1 (APC Level) or IRQL 0 (Passive Level).

So why doesn't the IRQL lower to access the memory address?

Windows doesn't work that way for good reason.
An Interrupt request (IRQ) has been initiated it is serviced in an order of priorities, for example an IRQ has been sent to service an I/O and an IRQ has been sent to draw a Window for an application, the disk I/O is more important so it is put at an IRQL higher than the application request. Right, so the I/O IRQ has to be completed before the IRQL can lower to service the IRQs below it.
Now, when something tries to access pageable memory at an IRQL higher than APC level it generates a page fault because the memory has been paged out to disk, now this page fault cannot be resolved by the trap handler because the IRQL is too high but the page fault needs servicing.

It then becomes a stalemate, you can't complete the page fault because the IRQL is too high but you cannot lower the IRQL because it needs servicing so the system bugchecks.

However, the strange thing I've noticed is this:


Code:
0000000000000000, IRQL
This IRQL wasn't too high,

Use Kaspersky's TDSSKiller Anti Rootkit utility

Anti-rootkit utility TDSSKiller

Uninstall these programs.


Code:
Start Menu\Programs\MotioninJoy Public:Start Menu\Programs\MotioninJoy Public

Code:
Start Menu\Programs\DAEMON Tools Lite Public:Start Menu\Programs\DAEMON Tools Lite Public
Find alternatives as they're caused quite a lot of issues.

http://www.sevenforums.com/bsod-help-support/334576-bsod-ntoskrnl-exe-75bc0.html
Relevancy 86.86%

My system has been BSOD randomly for 3-4 months.
Would be grateful if someone can help me. SF diagnostic log attached.

A:BSOD ntoskrnl.exe +75bc0

Code:
Microsoft (R) Windows Debugger Version 6.2.9200.20512 X86
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\Usra\Downloads\SF_tompus\SF_24-01-2014\011114-18891-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.18247.amd64fre.win7sp1_gdr.130828-1532
Machine Name:
Kernel base = 0xfffff800`0320b000 PsLoadedModuleList = 0xfffff800`0344e6d0
Debug session time: Sun Jan 12 02:24:40.453 2014 (UTC + 6:00)
System Uptime: 0 days 9:54:44.857
Loading Kernel Symbols
...............................................................
................................................................
.........................
Loading User Symbols
Loading unloaded module list
............
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 50, {fffff88007c0bd60, 0, fffff8000327fe5b, 0}


Could not read faulting driver name
Probably caused by : ntkrnlmp.exe ( nt!KiSystemServiceExit+0 )

Followup: MachineOwner
---------

Microsoft (R) Windows Debugger Version 6.2.9200.20512 X86
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\Usra\Downloads\SF_tompus\SF_24-01-2014\012414-17331-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.18247.amd64fre.win7sp1_gdr.130828-1532
Machine Name:
Kernel base = 0xfffff800`0325d000 PsLoadedModuleList = 0xfffff800`034a06d0
Debug session time: Sat Jan 25 00:33:40.275 2014 (UTC + 6:00)
System Uptime: 0 days 7:57:44.680
Loading Kernel Symbols
...............................................................
................................................................
........................
Loading User Symbols
Loading unloaded module list
........
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1A, {8886, fffffa8000d67ca0, fffffa8000581100, 205}

Probably caused by : memory_corruption ( nt!MiUnlinkPageFromLockedList+19c )

Followup: MachineOwner
---------
Start by taking Memtest.

Take memtest. Run for 8 passes and test each stick in a know good slot for an additional 6 passes.
RAM - Test with Memtest86+





Quote:
The goal is to test all the RAM sticks and all the motherboard slots.

Check your motherboard manual to ensure the RAM sticks are in the recommended motherboard slots. Some motherboards have very specific slots required for the number of RAM sticks installed.

If you get errors, stop the test and continue with the next step.

1. Remove all but one stick of RAM from your computer (this will be RAM stick #1), and run Memtest86 again, for 7 passes.*Be sure to note the RAM st... Read more

http://www.sevenforums.com/bsod-help-support/319584-bsod-ntoskrnl-exe-75bc0.html
Relevancy 86.86%

Fairly new computer I installed a Radeon HD graphics card after I initially bought the computer was running fine ntoskrnl.exe+75bc0 BSOD... for a while and then I BSOD... ntoskrnl.exe+75bc0 believe issues started when I ran Spybot and Adaware one day Computer was freezing and getting colors all across the screen and also restarting itself BSOD... ntoskrnl.exe+75bc0 I removed the Radeon graphics card and it stopped doing this Now I just get the BSOD and then it restarts happens about once a day No errors in the device Manager Below is Speccy MiniToolBox log and the BlueScreenView in that order I tried to attach the crash dump zip file but it was kb after I zipped it Speccy http speccy piriform com results agXl qUHTa j BqZuJU Mw MiniToolBox MiniToolBox by Farbar Version - - Ran by zj administrator on - - at Running from C Users zj Downloads Microsoft Windows Professional Service Pack X Boot Mode Normal Event log errors Application errors Error PM Source WinMgmt User Description root CIMV SELECT FROM InstanceModificationEvent WITHIN WHERE TargetInstance ISA Win Processor AND TargetInstance LoadPercentage gt x Error PM Source BstHdAndroidSvc User Description Service cannot be started System ApplicationException Cannot start service Service did not stop gracefully the last time it was run at BlueStacks hyperDroid Service Service OnStart String args at System ServiceProcess ServiceBase ServiceQueuedMainCallback Object state Error PM Source WinMgmt User Description root CIMV SELECT FROM InstanceModificationEvent WITHIN WHERE TargetInstance ISA Win Processor AND TargetInstance LoadPercentage gt x Error PM Source LMS User NT AUTHORITY Description LMS Service lost connection to HECI driver Error PM Source WinMgmt User Description root CIMV SELECT FROM InstanceModificationEvent WITHIN WHERE TargetInstance ISA Win Processor AND TargetInstance LoadPercentage gt x Error PM Source BstHdAndroidSvc User Description Service cannot be started System ApplicationException Cannot start service Service did not stop gracefully the last time it was run at BlueStacks hyperDroid Service Service OnStart String args at System ServiceProcess ServiceBase ServiceQueuedMainCallback Object state Error PM Source Application Error User Description Faulting application name NinjaTrader exe version time stamp x e d Faulting module name ntdll dll version time stamp x ea e Exception code xc Fault offset x c Faulting process id x Faulting application start time xNinjaTrader exe Faulting application path NinjaTrader exe Faulting module path NinjaTrader exe Report Id NinjaTrader exe Error AM Source WinMgmt User Description root CIMV SELECT FROM InstanceModificationEvent WITHIN WHERE TargetInstance ISA Win Processor AND TargetInstance LoadPercentage gt x Error AM Source BstHdAndroidSvc User Description Service cannot be started System ApplicationException Cannot start service Service did not stop gracefully the last time it was run at BlueStacks hyperDroid Service Service OnStart String args at System ServiceProcess ServiceBase ServiceQueuedMainCallback Object state Error PM Source LMS User NT AUTHORITY Description LMS Service lost connection to HECI driver System errors Error PM Source Service Control Manager User Description The BlueStacks Android Service service terminated with the following error Error PM Source Service Control Manager User Description The Network List Service service depends on the Network Location Awareness service which failed to start because of the following error Error PM Source Service Control Manager User Description The Network List Service service depends on the Network Location Awareness service which failed to start because of the following error Error PM Source Service Control Manager User Description The Network List Service service depends on the Network Location Awareness service which failed to start because of the following error Error PM Source Service Control Manager User Description The Network List Service service depends on th... Read more

A:BSOD... ntoskrnl.exe+75bc0

do financial trading on this machine by any chance?
 
I'd remove Adaware, Spybot, Online Threat Engine and any other malware removal tools you have. thne put a top free antivirus like MSE or Avira. Then consider a more dedicated, configurable firewall like Comodo or ZoneAlarm.
 
Could be a dying power supply... but better to tie up your security if this is a financial machine.

http://www.bleepingcomputer.com/forums/t/517809/bsod-ntoskrnlexe75bc0/
Relevancy 86%

So I made this thread Lots of programs quot have stopped working quot Also glitchy screen but after a week I JUST got a BSOD so I guess I would like some troubleshooting for this I think I'll copypaste what I posted in that thread quot An issue came up on my comp recently and it's the quot x program has stopped working ntoskrnl.exe+75bc0 help BSOD, please? and dxgkrnl.sys windows is trying to find a solution quot this happens randomly when I'm playing games like League dxgkrnl.sys and ntoskrnl.exe+75bc0 BSOD, help please? of Legends or Final Fantasy it even happens to Skype and most importantly sometimes it happens to Windows Explorer saying that quot Windows Explorer has stopped working and will now restart quot I don't know what is causing this and why some programs just decide to give me that error message Is it my graphics card Is it because I have malwarebytes and MSE I don't know I sent in my comp to my tech place to solve BSOD's and they returned it said it was working fine but it clearly isn't if these programs randomly give me the quot stopped working quot error I think we all know which error we're talking about right There's another thing and I think it's graphics card related sometimes I see little glitches on my screen randomly as if something was wrong with the computer like little color glitches maybe a little black bar in a random place or a quot glitchy quot color bar somewhere Is this because my graphics card is too old now for this CPU I have another graphics card which is gtx but it's sent in for repair because the cooler on it stopped working and should be returned next week Does anyone know how to fix my quot x program has stopped working quot problem Is it video card related Is there something on my computer that's causing it Maybe having antiviruses Is there malware on my computer or something dxgkrnl.sys and ntoskrnl.exe+75bc0 BSOD, help please? It gets really annoying Help would be very much appreciated I attached my dxdiag if that helps edit This is what the quot glitchy quot random screen I'm talking dxgkrnl.sys and ntoskrnl.exe+75bc0 BSOD, help please? about http puu sh bxEUW png that's part of a website and sometimes it gives me those bars ALSO I forgot to mention if I leave my computer on for too long white specs will cover my entire screen no matter if I'm gaming or just browsing tumblr facebook just imagine something like snow all over your screen I assume this is a video card thing So I have to restart sometimes and it fixes itself But my major problem is the programs that randomly quot stopped working quot An example of the quot stopped working quot error http puu sh bxFeC png just googled it I also get quot COM Surrogate has stopped working quot a lot too http puu sh bxFkH jpg and usually when I puu sh things it's an application that lets you take screenshots of your computer and upload it quickly or when I open up picture files quot I don't know what to do anymore Is it my video card It IS an old card but I've never had this problem before Or is something else conflicting with it Here is the complete bluescreenview screenshot http puu sh bxU png Also uploaded the attachment required Help would be very much appreciated I'm tired of this computer giving me problems

A:dxgkrnl.sys and ntoskrnl.exe+75bc0 BSOD, help please?

   Warning
4) No piracy or discussion of piracy allowed at all. Such as software, music, videos and other intellectual property violations (e.g. downloading youtube videos locally etc).


Your copy of windows is not genuine, Supports end here.

Counterfeit installations such as yours contain heavily modified code that causes the installation to behave it unexpected ways. Analyzing BSOD's and determining their causes on these sorts of installations is very unreliable. For this reason, many analysts won't attempt it.

My recommendation is to install a genuine Windows 7. This will minimize the problems you are experiencing, and make subsequent diagnosis of BSOD's far more reliable. Once you are running a genuine Windows 7 installation, and are still experiencing BSOD's, we will be happy to help you solve them.

http://www.sevenforums.com/bsod-help-support/345441-dxgkrnl-sys-ntoskrnl-exe-75bc0-bsod-help-please.html
Relevancy 86%

Hi all,

Last few days I'm experiencing BSOD.
After couple of days of browsing, searching, updating drivers etc. I find myself powerless.
Please, can anyone help?
Thank you in advance.
Jonci

A:BSOD DRIVER_POWER_STATE_FAILURE ntoskrnl.exe+75bc0

Hi jonci.

Yours a HP ProBook 4510s and it should have a webcam.





Quote:
Optional 2 MP webcam: Supports videoconferencing and still image capture
Improved quality for video streaming and still image capture (1600x1200 resolution)
Up to 30 frames/sec
Fixed focus lens
16-bit true color (camera sensor up to UXGA resolution)



Do you use any other webcam?

Can you disable your webcam, at least as a test?

After disabling the webcam, put the computer to sleep, then wake it up. Do it a few times.

Does it still BSOD while waking up? Let us know.
______________________________________

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa8005803620, fffff80004108518, fffffa800654e010}

Probably caused by : usbccgp.sys

Followup: MachineOwner
---------

http://www.sevenforums.com/bsod-help-support/332731-bsod-driver_power_state_failure-ntoskrnl-exe-75bc0.html
Relevancy 86%

Been battling BSOD on and off randomly for a while, always ntoskrnl.exe+75bc0. Started after installing Alan Wake. Windows and all drivers up to date. Ran memtest, HDD Diag, System verication, stress tested system and a few other things with no luck.

A:Random BSOD ntoskrnl.exe+75bc0

Fuzz67,

These minidumps don't contain enough information to directly pinpoint the cause. But because the errors are calling Windows Hardware Error Architecture it's safe to assume that an uncorrectable error occurred somewhere in hardware.

http://www.sevenforums.com/bsod-help-support/324224-random-bsod-ntoskrnl-exe-75bc0.html
Relevancy 86%

This has come and gone for a long time. I ran a registry repair tool that seemed to fix it for about a month, but now it's back with a vengeance (4 BSODs today). Latest dump attached. Any help would be greatly appreciated.

A:BSOD DRIVER_POWER_STATE_FAILURE ntoskrnl.exe +75bc0

Welcome, please follow the Blue Screen of Death (BSOD) Posting Instructions .

What I can take from the dump file is it's caused due to an Asus utility.


Code:
BugCheck 9F, {3, fffffa8006eeb060, fffff80000b9c518, fffffa800644cb80}

Unable to load image \SystemRoot\system32\DRIVERS\AiCharger.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for AiCharger.sys
*** ERROR: Module load completed but symbols could not be loaded for AiCharger.sys
Probably caused by : usbhub.sys

Code:
FAILURE_BUCKET_ID: X64_0x9F_3_AiCharger_IMAGE_usbhub.sys

BUCKET_ID: X64_0x9F_3_AiCharger_IMAGE_usbhub.sys

Code:
!irp fffffa800644cb80

[ 16, 0] 0 0 fffffa8006eeb060 00000000 fffff8800115a890-fffffa8006ed51b0
\Driver\usbhub AiCharger
Args: 00000000 00000000 00000000 00000002
>[ 16, 2] 0 e1 fffffa8006ed5060 00000000 00000000-00000000 pending
\Driver\AiCharger
Args: 00041100 00000001 00000001 00000002
Not only is the driver very old it's also known to cause BSODs with Windows 7.


Code:
lmvm AiCharger
start end module name
fffff880`0115a000 fffff880`0115be80 AiCharger T (no symbols)
Loaded symbol image file: AiCharger.sys
Image path: \SystemRoot\system32\DRIVERS\AiCharger.sys
Image name: AiCharger.sys
Timestamp: Wed May 05 11:37:36 2010
Driver Reference Table - AiCharger.sys
Please remove any Asus Utility.

http://www.sevenforums.com/bsod-help-support/310214-bsod-driver_power_state_failure-ntoskrnl-exe-75bc0.html
Relevancy 86%

Greetings -

This computer runs a program named HAUPTWERK, which generates pipe organ sounds based on MIDI input. I leave this computer on all the time with the HAUPTWERK program running. Recently, the BSODs have started - usually overnight and always when no MIDI activity is happening and the computer should be idle. I don't know how to determine which driver is failing and would appreciate some guidance.

DRIVER_POWER_STATE_FAILURE
BUG CHECK: 0x0000009f
Parm 1 = 00000000`00000003
Parm 2 = fffffa80`0d506a10
Parm 3 = fffff800`0457d3d8
Parm 4 = fffffa80`10a61b10
Caused by driver: ntoskrnl.exe
Address = ntoskrnl.exe+75bc0
Microsoft Version: 6.1.7601.18247 (win7sp1_gdr.130828-1532)

Dell Optiplex 790
x64
BIOS: Dell A07, 9/10/11
Memory 16GB

Audio Devices
M-Audio Delta 1010LT
M-Audio FW 410 (this is the most recent device added, although it has been installed for a while before the BSOD started happening)

I have attached the output from the SF Diagnostic Tool
Thanks!
chuck

A:BSOD DRIVER_POWER_STATE_FAILURE ntoskrnl.exe+75bc0

Hi Chuck.

A stop 0x9F BSOD is caused by Advanced Configuration and Power Interface (ACPI), the power management options. Technically it is termed as DRIVER_POWER_STATE_FAILURE. That means, some driver is failing to act or response properly during the power transitions.

The failing drivers, as I am noticing are
mafw.sys, Service for M-Audio FireWire (c:\windows\system32\drivers\mafw.sys); a component of your M-Audio Delta 1010LT sound card.
iastor.sys, Intel AHCI Controller (c:\windows\system32\drivers\iastor.sys); Intel(R) Desktop/Workstation/Server Express Chipset SATA AHCI Controller.
Now let us think what should be done these these drivers.

For the M-Audio stuff, I am failing to suggest updates, as there is no feasible update as I am seeing in M-AUDIO - Drivers and Software Search.
Attachment 293933
In that situation, you should try removing that card.

Get rid of intel rapid storage. First uninstall it from Control Panel > Programs and Features. Then Uninstall the driver from device manager.
Right click on "my computer" icon and click "manage" on the context menu.
It will open the "computer management" window.
Select "Device Manager" in the left pane, It will list all the existing devices up.
Expand "IDE ATA/ATAPI controllers" by clicking on the triangle in front of it.
Select one Intel device item under it, right click, uninstall.
Continue the process for all Intel items under "IDE ATA/ATAPI controllers"
Now restart the computer. At restart, windows will auto configure the appropriate native system driver.
Alternatively, you may try one more thing .... as it is ACPI related ....

Code:
Device object (fffffa80101a8050) is for:
InfoMask field not found for _OBJECT_HEADER at fffffa80101a8020
\Driver\usbehci DriverObject fffffa80101879f0
Current Irp 00000000 RefCount 0 Type 00000004 Flags 00000040
DevExt fffffa80101a81a0 DevObjExt fffffa80101a9c00
ExtensionFlags (0x00000800) DOE_DEFAULT_SD_PRESENT
Characteristics (0x00000100) FILE_DEVICE_SECURE_OPEN
AttachedTo (Lower) fffffa800d4db8c0 \Driver\ACPI
Device queue is not busy.
Disable hibernate. Follow Hibernate - Enable or Disable. Disable sleep too. As it is a desktop computer, hibernate and sleep is not needed at all.

If the issues are still there even after disabling hibernate and sleep, remove the M-Audio sound card and uninstall Intel Rapid Storage.

Let us know the results.

http://www.sevenforums.com/bsod-help-support/311911-bsod-driver_power_state_failure-ntoskrnl-exe-75bc0.html
Relevancy 86%

Hi,

Good Day

Just got my HP ZBOOK 14 a month ago, since day one I am keep getting BSOB of

DRIVER_POWER_STATE_FAILURE
BUG CHECK: 0x0000009f
Parm 1 = 00000000`00000003
Parm 2 = fffffa80`0d506a10
Parm 3 = fffff800`00ba2748
Parm 4 = fffffa80`1df0ec10
Caused by driver: ntoskrnl.exe
Address = ntoskrnl.exe+75bc0
Microsoft Version: 6.1.7601.18247 (win7sp1_gdr.130828-1532)

HP Zbook 14 with i7-4600U
128Msata+ 500HDD
16g Ram
AMD Firepro M4100 FireGL V + Intel(R) HD Graphics Family ( Switch able graphic)

Attached with the output from the SF Diagnostic Tool

Much Appreciate for you guys help.

Thank You

A:BSOD DRIVER_POWER_STATE_FAILURE ntoskrnl.exe+75bc0

Hi swt123.

Uninstall NetLimiter. It causes BSODs wherever it is present.

Free up the startup. Windows does not need any other program to auto start with it, but the auto start programs often conflicts and causes various problems including BSODs.
Click on the Start button
Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the “Startup” tab.
Deselect all items other than the antivirus and the touchpad driver, SynTPEnh.
Apply > OK
Accept then restart.
Upload the list of all the third party drivers Using NirSoft DriverView :
Download and execute Driverview
View > Hide Microsoft Drivers
Edit > Select all
File > Save Selected Items
In the Save dialog, Set the path to desktop, Put "Driverview" in the name field, and save.
Zip the .txt file and upload it.
Let us know.

http://www.sevenforums.com/bsod-help-support/327171-bsod-driver_power_state_failure-ntoskrnl-exe-75bc0.html
Relevancy 86%

Hallo everyone,

I am experiencing again this
DRIVER_POWER_STATE_FAILURE
0x0000009f 00000000`00000003 fffffa80`073f0060 fffff800`00b9c3d8 fffffa80`06b8d540

ntoskrnl.exe+75bc0
6.1.7601.18247 (win7sp1_gdr.130828-1532)
My laptop is a Asus N56JR
where I forced the installation of Win7.
Attached the results of your SFD tool.

Regards

A:BSOD DRIVER_POWER_STATE_FAILURE ntoskrnl.exe+75bc0

You need not to enable driver verifier.

Upload your MSINFO32.nfo file, so that we can see a bit deeper.
Click on the start button
Type "msinfo32" (without quotes) in the search bar of the start menu, click the resulting link. It will open the System Information window.
File>Save. In the "File Name" filed, put "MSINFO32" (without Quote), give the save location to desktop, and click the "save" button.
Give the time for processing, it will save a .nfo file on your desktop.
Zip it, and upload it following the instruction.
________________________________________________

Code:
Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 0 fffffa800a6f0050 00000000 00000000-00000000
Unable to load image \SystemRoot\system32\DRIVERS\athrx.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for athrx.sys
*** ERROR: Module load completed but symbols could not be loaded for athrx.sys
\Driver\athr
Args: 00014400 00000000 00000004 00000002
[ 16, 2] 0 e1 fffffa800a727c70 00000000 fffff8000331d200-fffffa8007bfb890 Success Error Cancel pending
\Driver\vwifibus nt!PopSystemIrpCompletion
Args: 00014400 00000000 00000004 00000002
[ 0, 0] 0 0 00000000 00000000 00000000-fffffa8007bfb890

Args: 00000000 00000000 00000000 00000000

Code:
fffff880`08a22000 fffff880`08e28000 athrx T (no symbols)
Loaded symbol image file: athrx.sys
Image path: \SystemRoot\system32\DRIVERS\athrx.sys
Image name: athrx.sys
Timestamp: Mon Oct 21 16:17:28 2013 (52650640)
CheckSum: 003D866A
ImageSize: 00406000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

http://www.sevenforums.com/bsod-help-support/325375-bsod-driver_power_state_failure-ntoskrnl-exe-75bc0.html
Relevancy 85.14%

Greetings

My pc is having lots of BSOD for the past months.
The BluwScreenView shows that mostly the error has to do with ntoskrnl.exe+75bc0.

I tested my hdds and RAM (using MemTest) but there where no errors.

I am posting my report file, and I hope if you could resolve my problem.

Thank you in advance

A:Lots of BSOD caused by ntoskrnl.exe+75bc0

The crash dumps are almost the same.

Code:
BugCheck 109, {a3a039d8a4881742, b3b7465ef704e698, fffff800050213c8, 1}

*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : memory_corruption

Followup: memory_corruption
---------
Are you overclocking? As you are getting BSODs, you should stop overclocking and run all the hardware components like CPU, GPU and RAM to their default settings.

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Let us know the results.

http://www.sevenforums.com/bsod-help-support/324227-lots-bsod-caused-ntoskrnl-exe-75bc0.html
Relevancy 85.14%

Hi, I have a BSOD that I do not manage to solve.
It also seems to be linked to Kernel-Power 41 (63) critical error.

Below are the element you've aksed to provide.
Thanks in advance for your time and support.

Happy new years with tons of solutions...
Arnauld

? OS: Windows 7
? x64
? Original OS : 7
? OEM version (pre-installed on HP computer whn I bought it)
? 2011
? 2011
? Yes, DEC 2014

? CPU: i7, 870 @ 2.93 GHz (4 CPUs)
? Video Card: NVidia GTX 650
? MotherBoard: HP MS-7613 (Iona GL8E)
? Power Supply: original from HP...

? System Manufacturer : HP
? Exact model number: HPE-498d
. Desktop
HP Pavilion Elite HPE-498d Desktop PC Product Specifications | HP? Support

A:[SOLVED] BSOD - ntoskrnl.exe+75bc0 - IRQL_NOT_LESS_OR_EQUAL

Kernel-Power 41 simply means the PC was powered down manually either by the user unplugging the power or pushing the reset power button.

I ran 7 of the dumps all show being caused by NETIO.SYS which is a Windows networking driver, it appears to me it's calling for a stop because of interference from your Emsisoft Firewall program(fwwfp764.sys), try disabling it and using windows firewall.


Code:


Debug session time: Sat Jan 3 00:51:04.990 2015 (UTC - 5:00)
Loading Dump File [C:\Users\Owner\Bsodapps\SysnativeBSODApps\010315-23774-01.dmp]
Built by: 7601.18409.amd64fre.win7sp1_gdr.140303-2144
System Uptime: 0 days 0:02:24.911
*** ERROR: Module load completed but symbols could not be loaded for tcpip.sys
*** WARNING: Unable to verify timestamp for fwwfp764.sys
*** ERROR: Module load completed but symbols could not be loaded for fwwfp764.sys
Probably caused by : NETIO.SYS ( NETIO!WfpExpireEntryLru+17 )
BugCheck A, {0, 2, 1, fffff80002ecbc3f}
BugCheck Info: IRQL_NOT_LESS_OR_EQUAL (a)
Bugcheck code 0000000A
Arguments:
Arg1: 0000000000000000, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff80002ecbc3f, address which referenced memory
BUGCHECK_STR: 0xA
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0xA_NETIO!WfpExpireEntryLru+17
MaxSpeed: 2930
CurrentSpeed: 2926
BiosVersion = 6.14
BiosReleaseDate = 11/05/2010
SystemManufacturer = Hewlett-Packard
SystemProductName = HPE-498d
??????????????????????????????????????????????????????????????????????????????????????``
Debug session time: Sat Jan 3 00:46:32.258 2015 (UTC - 5:00)
Loading Dump File [C:\Users\Owner\Bsodapps\SysnativeBSODApps\010315-23556-01.dmp]
Built by: 7601.18409.amd64fre.win7sp1_gdr.140303-2144
System Uptime: 0 days 0:10:58.569
*** ERROR: Module load completed but symbols could not be loaded for tcpip.sys
*** WARNING: Unable to verify timestamp for fwwfp764.sys
*** ERROR: Module load completed but symbols could not be loaded for fwwfp764.sys
Probably caused by : NETIO.SYS ( NETIO!WfpExpireEntryLru+17 )
BugCheck A, {0, 2, 1, fffff80002e9bc3f}
BugCheck Info: IRQL_NOT_LESS_OR_EQUAL (a)
Bugcheck code 0000000A
Arguments:
Arg1: 0000000000000000, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff80002e9bc3f, address which referenced memory
BUGCHECK_STR: 0xA
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0xA_NETIO!WfpExpireEntryLru+17
MaxSpeed: 2930
CurrentSpeed: 2926
BiosVersion = 6.14
BiosReleaseDate = 11/05/2010
SystemManufacturer = Hewlett-Packard
SystemProductName = HPE-498d
??????????????????????????????????????????????????????????????????????????????????????``
Debug session time: Sat Jan 3 00:33:26.026 2015 (UTC - 5:00)
Loading Dump File [C:\Users\Owner\Bsodapps\SysnativeBSODApps\010315-24991-01.dmp]
Built by: 7601.18409.amd64fre.win7sp1_gdr.140303-2144
System Uptime: 0 days 13:17:57.947
*** ERROR: Module load completed but symbols could not be loaded for tcpip.sys
*** WARNING: Unable to verify timestamp for fwwfp764.sys
*** ERROR: Module load completed but symbols could not be loaded for fwwfp764.sys
Probably caused by : NETIO.SYS ( NETIO!WfpExpireEntryLru+17 )
BugCheck A, {0, 2, 1, fffff80002ed4c3f}
BugCheck Info: IRQL_NOT_LESS_OR_EQUAL (a)
Bugcheck code 0000000A
Arguments:
Arg1: 0000000000000000, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
A... Read more

http://www.techsupportforum.com/forums/f299/solved-bsod-ntoskrnl-exe-75bc0-irql_not_less_or_equal-940122.html
Relevancy 85.14%

This is a month old build that has been plagued by this kernel BG of Kingston extreme ram Intel I Causing multiple BSOD ntoskrnl.exe+75bc0 K processor Gigabyte Motherboard and a later added EVGA GB video card All inside of a corsair case and W PS I do ntoskrnl.exe+75bc0 Causing multiple BSOD have an Associates in Networking and computer tech but I have never diagnosed a blue screen problem before so this is all new to me As stated in the thread title ntoskrnl.exe+75bc0 Causing multiple BSOD it is the ntoskrnl exe bc kernel that is causing the blue screens and I am not sure what to make of it I used blue screen view and from the help of the board here I used the windows debugging tool and that also pointed to the same ntoskrnl exe bc kernel I downloaded the windows diagnostic tool and hopefully that was done right and properly uploaded because I could use the help I did run memtest and was given a clean bill of health but I might run it again just to be on the safe side I would greatly appreciate any help And merry Christmas John

A:ntoskrnl.exe+75bc0 Causing multiple BSOD

Code:
Microsoft (R) Windows Debugger Version 6.2.9200.20512 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\USER\Downloads\Compressed\SF_24-12-2014\SF_24-12-2014\122314-21231-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.18409.amd64fre.win7sp1_gdr.140303-2144
Machine Name:
Kernel base = 0xfffff800`0344c000 PsLoadedModuleList = 0xfffff800`0368f890
Debug session time: Tue Dec 23 11:32:05.166 2014 (UTC + 6:00)
System Uptime: 0 days 2:26:31.040
Loading Kernel Symbols
...............................................................
................................................................
..............................
Loading User Symbols
Loading unloaded module list
...............
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1A, {41790, fffffa800a7ff910, ffff, 0}

Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+35084 )

Followup: MachineOwner
---------

4: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

MEMORY_MANAGEMENT (1a)
# Any other values for parameter 1 must be individually examined.
Arguments:
Arg1: 0000000000041790, A page table page has been corrupted. On a 64 bit OS, parameter 2
contains the address of the PFN for the corrupted page table page.
On a 32 bit OS, parameter 2 contains a pointer to the number of used
PTEs, and parameter 3 contains the number of used PTEs.
Arg2: fffffa800a7ff910
Arg3: 000000000000ffff
Arg4: 0000000000000000

Debugging Details:
------------------


BUGCHECK_STR: 0x1a_41790

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

PROCESS_NAME: rundll32.exe

CURRENT_IRQL: 0

LAST_CONTROL_TRANSFER: from fffff80003532d50 to fffff800034c1bc0

STACK_TEXT:
fffff880`0e6776e8 fffff800`03532d50 : 00000000`0000001a 00000000`00041790 fffffa80`0a7ff910 00000000`0000ffff : nt!KeBugCheckEx
fffff880`0e6776f0 fffff800`034f47d9 : 00000000`00000000 00000000`739affff fffffa80`00000000 00000000`00000000 : nt! ?? ::FNODOBFM::`string'+0x35084
fffff880`0e6778b0 fffff800`037db0f1 : fffffa80`106b7cd0 00000000`00000000 00000000`00000000 00000000`00000000 : nt!MiRemoveMappedView+0xd9
fffff880`0e6779d0 fffff800`037db4f3 : 00000000`00000000 00000000`73950000 fffffa80`00000001 fffffa80`10fd8e60 : nt!MiUnmapViewOfSection+0x1b1
fffff880`0e677a90 fffff800`034c0e53 : fffffa80`0d16e060 fffff880`0e677b60 fffffa80`0de3e790 00000000`00000026 : nt!NtUnmapViewOfSection+0x5f
fffff880`0e677ae0 00000000`76ea155a : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
00000000`0014ad38 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x76ea155a


STACK_COMMAND: kb

FOLLOWUP_IP:
nt! ?? ::FNODOBFM::`string'+35084
fffff800`03532d50 cc int 3

SYMBOL_STACK_INDEX: 1

SYMBOL_NAME: nt! ?? ::FNODOBFM::`s... Read more

http://www.sevenforums.com/bsod-help-support/356264-ntoskrnl-exe-75bc0-causing-multiple-bsod.html
Relevancy 85.14%

I have some bluescreen issues. Whenever I'm doing something graphically intensive, I get lots of bands of color across the screen for a few seconds. Then I get a BSOD for a second. I used BlueScreenView to pull up three logs. I've attached those for anyone who has some free time to look at them.
 
I've run memstest for 4 passes and there were no errors. This leads me to believe that my problems stem from either a bad GPU or some kind of driver conflict.
 
Any help would be very much appreciated!
 

 bluescreen1.txt   2.05KB
  10 downloads

 bluescreen2.txt   2.05KB
  3 downloads

 bluescreen4.txt   2.06KB
  3 downloads

 bluescrren3.txt   2.06KB
  4 downloads

A:BSOD help! crash address - ntoskrnl.exe+75bc0

Since all four of these reports refer to system files, I would be inclined to run 'sfc /scannow' to repair any corrupted files. If you don't know how to do this :
 
Click on 'Start'; type 'cmd' into the search box (ALL typing without the quotes !); this may bring up a number of things but at the top will be 'cmd.exe'.
 
RIGHT click on this and choose 'Run as administrator'; then at the cursor type 'sfc /scannow' and press the 'Enter' key to start it running. Note that there is a space between 'sfc' and '/scannow'. Then let it run, it may take a while but let it finish. Then re-boot and try running something graphics intensive and see what happens.
 
Try the above, and if it works, great.  However your remarks 'graphically intensive' and 'bands of colour' suggest you may have either a graphics card problem or an over heating one. When you post back, if the problem isn't solved please give the make and model of your computer plus details on your graphics card.
 
Chris Cosgrove

http://www.bleepingcomputer.com/forums/t/543015/bsod-help-crash-address-ntoskrnlexe75bc0/
Relevancy 85.14%

I get the same BSOD every time. Usually, almost exclusively when I shut the laptop and it is supposed to sleep. What happens is, it turns off. I have attached the BSOD file. I am guessing my power supply is running into problems. Tell me I am wrong.... please?

A:BSOD DRIVER_POWER_STATE_FAILURE crash at ntoskrnl.exe+75bc0

Welcome to SF ahalmay, please follow the Blue Screen of Death (BSOD) Posting Instructions .
All files are missing (part from three dumps), so I'm not getting the full picture.
Please follow the instructions detailed in the link above.

http://www.sevenforums.com/bsod-help-support/337625-bsod-driver_power_state_failure-crash-ntoskrnl-exe-75bc0.html
Relevancy 85.14%

My Lenovo IdeaPad Y which I bought last Fall has been having problems lately and when I brought it home from work this evening I've been unable to use it outside of safe mode without getting a BSOD I don't believe it's a memory problem because it runs in safe mode but I will run memcheck if someone here recommends it I've uploaded all the minidump files from today here - - dmp - Speedy Share shortly after ntoskrnl.exe+75bc0 startup, BSOD - upload your files here - - dmp - Speedy Share - upload BSOD shortly after startup, ntoskrnl.exe+75bc0 your files here - - dmp BSOD shortly after startup, ntoskrnl.exe+75bc0 - Speedy Share - upload your files here - - dmp - Speedy Share - upload your files here - - dmp - Speedy Share - upload your files here - - dmp - Speedy Share - upload your files here - - dmp - Speedy Share - upload your files here - - dmp - Speedy Share - upload your files here - - dmp - Speedy Share - upload your files here - - dmp - Speedy Share - upload your files here

A:BSOD shortly after startup, ntoskrnl.exe+75bc0

Additional information is required.

1. Download the DM Log Collector application to your desktop by clicking the link below

DM Log Collector.exe

2. Run it by double-clicking the icon on your desktop, and follow the prompts.
3. Locate the .ZIP file created on your desktop, and upload it here in your next reply.

http://www.sevenforums.com/bsod-help-support/327284-bsod-shortly-after-startup-ntoskrnl-exe-75bc0.html
Relevancy 85.14%

Please help! I feel in over my head for once.

I believe all of my drivers are current. I've reset BIOS to recommended settings. I ran one pass on memtest with no errors. I've run virus scans.

I'm not sure if it's related, but I think I may have had/have a memory leak related to svchost.exe LOCAL SERVICE EventSystem COM + Event System. The other day this Process was using 4GB of RAM, and now I'm getting all these BSODs. I could be wrong on which svchost it was.

DM Log output, BlueScreenView grid, and zip of minidump files attached.

Thanks.

A:Multiple BSOD related to ntoskrnl.exe+75bc0

Here's a link to my SkyDrive folder with lots of logs and file outputs related to this.
https://onedrive.live.com/redir?resi...85159E60%21142

http://www.sevenforums.com/bsod-help-support/333381-multiple-bsod-related-ntoskrnl-exe-75bc0.html
Relevancy 85.14%

Hi folks,

I'm a bit stumped on this error and was hoping some fine gents would have the time to look at this dump and see what might be causing my blue screens. It started in the last two weeks while I was playing SWTOR or HoN. There was no rhyme or reason when it happened, seems pretty random other than it happens while gaming. It's only happened about 5 times, but that seems consistent enough to make me worry.

Unfortunately I don't know what else has changed on my system other than installing Asus AI Suite and EVGA Precision for monitoring / fan control.

Please see the relevant dump files attached (Both seem different which is a bit odd... ).

I would appreciate any help.

Thank you, J

A:BSOD ntoskrnl.exe+75bc0 (0x0000003b) - While gaming

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1E, {0, 0, 0, 0}

*** WARNING: Unable to verify timestamp for btwdpan.sys
*** ERROR: Module load completed but symbols could not be loaded for btwdpan.sys
fffff880`07f68000 fffff880`07f84000 btwdpan T (no symbols)
Loaded symbol image file: btwdpan.sys
Image path: \SystemRoot\system32\DRIVERS\btwdpan.sys
Image name: btwdpan.sys
Timestamp: Tue May 17 00:28:06 2011 (4DD13B7E)
CheckSum: 000196E2
ImageSize: 0001C000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Issue seems to emanate from an old Broadcom blue tooth LAN driver. See if you can install an updated driver from here:
Ethernet NIC Driver Downloads | Broadcom

http://www.sevenforums.com/bsod-help-support/356627-bsod-ntoskrnl-exe-75bc0-0x0000003b-while-gaming.html
Relevancy 85.14%

This happened only recently, and as per title, totally random.
I dont have to be doing anything in particular, but it would just crash without any warning.

Please help, its getting really annoying :/

A:Random BSOD, ntoskrnl.exe+75bc0, BCCode 116

An old computer, and stop 0x116.

Is the computer hot? Report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy. Alternatively, you can publish a Speccy snapshot too: Speccy - Publish Snapshot of your System Specs .

Check if the Power Supply Unit (PSU) supplying adequate power to the computer or not.
eXtreme Power Supply Calculator
Also let us know the wattage of your PSU.

Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

Are you overclocking? As you are getting BSODs, you should stop overclocking and run all the hardware components like CPU, GPU and RAM to their default settings.

Install the NVIDIA DRIVERS 314.22WHQL only.
Uninstall All nvidia items in Control Panel > Programs and features3D Vision Control Driver
3D Vision Driver
Graphics Driver
HD Audio Driver
PhysX
nvidia Update
(Are you using nvidia chipset drivers? If so, dont uninstall anything other than those are listed).
Now follow Drivers - Clean Left over Files after Uninstalling
Download 314.22 WHQL. While installing, Select Custom (Advanced) install. In the next page, follow this settings:
Let us know the results.
________________________________________________________________________________________

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 116, {fffffa8009317010, fffff880055d66bc, ffffffffc000000d, 3}

Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+8ed6bc )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

VIDEO_TDR_FAILURE (116)
Attempt to reset the display driver and recover from timeout failed.
Arguments:
Arg1: fffffa8009317010, Optional pointer to internal TDR recovery context (TDR_RECOVERY_CONTEXT).
Arg2: fffff880055d66bc, The pointer into responsible device driver module (e.g. owner tag).
Arg3: ffffffffc000000d, Optional error code (NTSTATUS) of the last failed operation.
Arg4: 0000000000000003, Optional internal context dependent data.

Debugging Details:
------------------
FAULTING_IP:
nvlddmkm+8ed6bc
fffff880`055d66bc 4055 push rbp

DEFAULT_BUCKET_ID: GRAPHICS_DRIVER_TDR_FAULT

CUSTOMER_CRASH_COUNT: 1

BUGCHECK_STR: 0x116

PROCESS_NAME: System

CURRENT_IRQL: 0

STACK_TEXT:
fffff880`041ae9d8 fffff880`04723140 : 00000000`00000116 fffffa80`09317010 fffff880`055d66bc ffffffff`c000000d : nt!KeBugCheckEx
fffff880`041ae9e0 fffff880`046f6569 : fffff880`055d66bc fffffa80`06793000 00000000`00000000 fffffa80`06720410 : dxgkrnl!TdrBugcheckOnTimeout+0xec
fffff880`041aea20 fffff880`04722eed : fffffa80`09317010 fffffa80`09317010 fffffa80`09317010 fffffa80`06720410 : dxgkrnl!DXGADAPTER::PrepareToReset+0x109
fffff880`041aea60 fffff880`047c9f13 : fffffa80`09317010 00000000`00000000 fffffa80`067f9d50 fffffa80`06720410 : dxgkrnl!TdrIsRecoveryRequired+0x245
fffff880`041aea90 fffff880`047f7ed6 : fffffa80`ffffffff 00000000`01d9315f fffff880`041aebf0 00000000`00000002 : dxgmms1!VidSchiReport... Read more

http://www.sevenforums.com/bsod-help-support/315829-random-bsod-ntoskrnl-exe-75bc0-bccode-116-a.html
Relevancy 85.14%

Hi,

first at all, because of x109 BSOD I switched from Home Edition x64 to Ultimate x64. After a fresh install and after 1 day I'm already having new BSOD caused by ntoskrnl.exe+75bc0.

I have already:

1) Updated all the drivers through driver genius
2) Updated BIOS and Windows
3) Changed a suspect broken RAM (I have 2*4GB ram) - by memtest, anyway, no problem after 9 passes
4) Changed Antivirus (Avast, then AVG and now Windows Essential)

I attach the SF file, hoping you will help me to resolve this problem!!!

Thank you in advance

A:BSOD ntoskrnl.exe+75bc0 on Windows7 Ultimate x64

Code:
Nome host: BENDETTA-PC
Nome SO: Microsoft Windows 7 Ultimate
Versione SO: 6.1.7601 Service Pack 1 build 7601
Produttore SO: Microsoft Corporation
Configurazione SO: Workstation autonoma
Tipo build SO: Multiprocessor Free
Proprietario registrato: Bendetta
Organizzazione registrata:
Numero di serie: 00426-OEM-8992662-00006
Data di installazione originale: 12/01/2014, 02:34:45
Tempo di avvio sistema: 13/01/2014, 14:12:59
Produttore sistema: Gigabyte Technology Co., Ltd.
Modello sistema: Z68X-UD3H-B3
Uninstall this Windows 7 Ultimate ACER OEM, and reinstall Windows 7 Home Premium. Once you have activated and updated it fully, follow these steps and I'll analyse the dump files and see if we can find a solution:

1. Download this .BAT file to your desktop
2. Right-click and 'Run as Administrator'
3. Locate the .ZIP file on desktop and upload here.

http://www.sevenforums.com/bsod-help-support/318265-bsod-ntoskrnl-exe-75bc0-windows7-ultimate-x64.html
Relevancy 84.28%

This is a fresh build made with a combination of new and older parts. Over the past week, It's crashed 5 times, under varying loads. I'm guessing it's a hardware issue, but I'm no expert. Please help me fix this issue.
 
Below is a Speccy screenshot.
 
Attatches are a MiniToolBox log of the last 10 Event Viewer Events, Devices, Users/Partitions/Memory size and Minidump files, as well as a zip folder of my minidump files.
 
Thank you all in advance.
 
Speccy:
 
http://speccy.piriform.com/results/edcqZjOt6zAMXJSB4hz6NbC

A:Seemingly random BSOD caused by ntoskrnl.exe+75bc0.

I don't know how other's feel about this, but as a practice I will not download anything to my computer unless I know exactly what the content is.
 
Once the MiniTooBox scan is finished you can copy and then paste the results in your topic.  You can do the same with the minidumps.  I would post these separately, ex. post #3 minitoolbox, post #4 minidumps.
 
The Speccy is showing the 12V rail to be 8.064V.  I suspect this isn't accurate, but it would be worth putting a meter on it to be sure.  If it is accurate, then your PSU has a problem.
 
Voltages:
 
+3.3V    2.004V
+5V       3.367V
+12V     8.064V
 
If you have a multimeter with a DC Volt scale you can use the instructions below to read the rail voltages.
 
 
Reading Desktop PSU Rail Voltages
 
Caution: Please read this before continuing.
 
 

 Since it will be necessary for your computer to be on during this procedure, you need to be aware that you will be working with live 12Volt DC potentials, which if handled improperly may lead to electrical shock. 

 

There are electronics inside the case that are very susceptible to electrostatic discharges. To protect your computer, touch the metal of the case to discharge yourself of any electrostatic charges before touching any of the components inside.

 

If you are not comfortable doing this procedure, then I would suggest that you not use this tutorial. The risks involved are minimal, but are there nevertheless. Anyone who uses this tutorial will be doing so at their own risk.

 
 
There are two devices commonly used to read the rail voltages: a PSU tester, and a multimeter. 
 
The PSU tester is the easiest to use since all that is necessary is to plug the different connectors into the tester and read the results on the LCD display. The problem with most of these is that they only perform a pass/fail test.  They will not provide you with actual voltage readings.
 
There are a variety of multiple meters, but this tutorial will address Analog and Digital multimeters. The advantage of these meters is that you will be able to obtain accurate real time voltage readings.
 
For those of you who wish to know more about multimeters there is an excellent article in Wikipedia.
 
 
Analog Multimeter
 

 
 
An Analog multimeter is a little more complicated to use. Both Analog and Digital multimeters need to be set to the appropriate voltage, but with an Analog multimeter, you will need to choose the voltage range and must read the proper scale. 
 
The Analog multimeter uses a needle display which moves from 0 across the scale until it reaches the voltage being tested. This multimeter has five major linear divisions with multiple scales to read a variety of ranges. An example would be three different ranges. The first is graduated in increments of 0 through 5, the second, 0 through 10, and the third, 0 through 25. Each of these ranges are subdivided into divisions that are graduated into tenths. In order to read 12 volts the 0 through 25 range would be the appropriate one. 
 
Because DC voltage has positive and negative potentials this device is polar sensitive, this means that if you reverse the two probes when reading a positive DC voltage it will read as a negative voltage. This is actually necessary to read negative DC voltages. The two probes are differentiated by their color, Black (negative), and Red (positive). To read a positive DC voltage, the correct probes must be used with their corresponding potentials (positive to positive and negative to negative). 
 
With the probes being used normally to read a negative DC voltage, the needle moves from the 0 to the left, "pegging" the needle. By reversing the probes you can properly read the negative voltages.
 
Digital Multimeter
 

 
 
The Digital multim... Read more

http://www.bleepingcomputer.com/forums/t/517282/seemingly-random-bsod-caused-by-ntoskrnlexe75bc0/
Relevancy 84.28%

Hi all!

I've been fighting this random BSOD issue for a couple of months now, and am starting to get really frustrated with it.

I have included the various dumps as requested. I BELIEVE that it's related to the crappy Marvell RAID controller driver included on the mobo since I'm missing a disk in Windows (brand new.) But, I'm not experienced enough to debug this issue.

Could somebody take a look and help me troubleshoot this? Please let me know if you need anything else.

Thanks so much!

A:Random BSOD and System Shutdown, ntoskrnl.exe+75bc0

Welcome to the forum.

Please update these outdated drivers:

Perform a clean install of a driver following: How to Clean Left Over Driver Files with Driver Sweeper





Quote:
AppleCharger.sys Wed Nov 2 08:46:00 2011 (4EB0AEE8)
GIGABYTE On/Off Charge driver. See here for details - GIGABYTE ON/OFF Charge [br] May cause BSOD on Win7/8 systems - uninstall to test.
Driver Reference Table - AppleCharger.sys


akshhl.sys Fri Jul 20 15:30:59 2007 (46A080D3)
AksFridge driver (Aladdin security products)
Driver Reference Table - akshhl.sys

AKSCLASS.SYS Wed Nov 21 23:13:32 2007 (4744673C)
AksFridge driver (Aladdin security products)
Driver Reference Table - AKSCLASS.SYS

aksfridge.sys Thu Jan 8 13:59:54 2009 (4965B27A)
AksFridge driver (Aladdin security products)
Driver Reference Table - aksfridge.sys

aksusb.sys Wed Jan 28 21:02:53 2009 (4980739D)
AksFridge driver (Aladdin security products)
Driver Reference Table - aksusb.sys

hardlock.sys Mon Feb 2 21:34:08 2009 (49871270)
Hardlock Device Driver by Aladdin KnowledgeSystems
Driver Reference Table - hardlock.sys

akshasp.sys Mon Feb 2 21:47:42 2009 (4987159E)
AksFridge driver (Aladdin security products)
Driver Reference Table - akshasp.sys

mvxxmm.sys Thu Jan 19 12:50:44 2012 (4F17BD44)
Marvell Aux NV Bridge DLL - related to mv91xx SCSI HD Controller
Driver Reference Table - mvxxmm.sys

mvs91xx.sys Thu Jan 19 12:51:00 2012 (4F17BD54)
Marvell 91xx SATA Controller Driver
Driver Reference Table - mvs91xx.sys

If no updates are available, please remove the software with Revo Uninstaller Free.

Use Revo Uninstaller to uninstall stubborn software. Opt for Advance Mode while uninstalling which allows leftover registry removal:Download Revo Uninstaller Freeware - Free and Full Download - Uninstall software, remove programs, solve uninstall problems

Reduce items at start-up: Startup Programs - Change

Perform a clean boot: Troubleshoot Application Conflicts by Performing a Clean Startup

Trend Micro software tends to cause BSOD's. Please remove it for testing purpose. Use Microsoft Security Essentials.

Recommended from a strict BSOD perspective, compatibility & stability compared to other security software:

Microsoft Security Essentials - Free Antivirus for Windows

Malwarebytes - Free

Good and Free system security combination.

Do not start the free trial of Malware Bytes; remember to deselect that option when prompted.

Scan with Kaspersky TDSSKiller:Anti-rootkit utility TDSSKiller

ESET online scanner: Free Online Virus Scanner | ESET

Run Disk Check on your Hard Drive(s): Disk Check

Run a System file check (SFC): SFC /SCANNOW Command - System File Checker

Check for heating issues using Speccy or HWmonitor

Upload a screen shot: Screenshots and Files - Upload and Post in Seven Forums

Keep us posted. Good luck.

Bugcheck Summary:

Code:
Debug session time: Fri Dec 6 22:52:46.639 2013 (UTC + 6:00)
Built by: 7601.18247.amd64fre.win7sp1_gdr.130828-1532
System Uptime: 0 days 0:41:33.857
Probably caused by : pci.sys
BugCheck 9F, {3, fffffa800c933a10, fffff800048de3d8, fffffa8012222c60}
BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)
Bugcheck code 0000009F
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: fffffa800c933a10, Physical Device Object of the stack
Arg3: fffff800048de3d8, nt!TRIAGE_9F_POWER on Win7, otherwise the Functional Device Object of the stack
Arg4: fffffa8012222c60, The blocked IRP
BUGCHECK_STR: 0x9F
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0x9F_3_mvs91xx_IMAGE_pci.sys
??????????????????????????????????????????????????????????????????????????????????????``
Debug session time: Fri Dec 6 07:11:56.706 2013 (UTC + 6:00)
Built by: 7601.18247.amd64fre.win7sp1_gdr.130828-1532
System Uptime: 0 days 0:51:03.908
Probably caused by : pci... Read more

http://www.sevenforums.com/bsod-help-support/314222-random-bsod-system-shutdown-ntoskrnl-exe-75bc0.html
Relevancy 84.28%

I had a computer but thought it was time for a new one, got a new cpu video card motherboard power supply ram, all of it.
When I switched my hard drive to new computer i was getting BSOD so i reset the hard drive and installed windows 7
Kept getting it so i bought a new hard drive and put windows 7 on it and im still getting it
Switched this hard drive to the old computer and it was all fine but when i switched it back to this it started happening again.
I'd love help!

A:Spent to much money for this BSOD crap ntoskrnl.exe+75bc0

Post it following the Blue Screen of Death (BSOD) Posting Instructions.

http://www.sevenforums.com/bsod-help-support/317332-spent-much-money-bsod-crap-ntoskrnl-exe-75bc0.html
Relevancy 84.28%

Ever since I bought this new computer months ago it's already been giving me problems with BSOD's and the tech company that constant these of Really random BSOD's tired ntoskrnl.exe+75bc0 sold it to me is literally useless to help me with this problem First of all I bought it with sticks of GB RAM totaling GB RAM but apparently the RAM sticks were corrupt or Really tired of these constant random BSOD's ntoskrnl.exe+75bc0 something tried exchanging them various times and the corrupt RAM gave me BSOD's when there were sticks in but it works fine with only stick of GB RAM The sticks are apparently conflicting with eachother and the tech company decided to give me stick of GB which I'll be recieving trading in Really tired of these constant random BSOD's ntoskrnl.exe+75bc0 for the GB's next week Moving on Really tired of these constant random BSOD's ntoskrnl.exe+75bc0 sometimes even with RAM stick I still get BSOD issues I have bluescreenview and eventually it all leads up to something called quot ntoskrnl exe bc quot I feel like they built my computer wrong or something But I also feel like it's an NVIDIA Graphics card issue Thing is I don't know what to do about it as I'm not knowledgeable with computers Back when I tried using this computer with sticks of GB RAM it worked except when I tried to run games like League of Legends it simply would just outright BSOD when I ran a game I also BSOD'd times while typing this thread after receiving today my computer back from the tech company who are basically like quot idk quot towards the whole situation If anyone knows what the problem is and what I could do to fix this help would be very much appreciated and I would be very graetful thank you

A:Really tired of these constant random BSOD's ntoskrnl.exe+75bc0

Hi Princey.

Yes, I agree that it is bad that the BSODs are occurring even with 1 RAM stick. But, multiple things are failing here, display and network.

Update the intel network driver from https://downloadcenter.intel.com/default.aspx.

Install the NVIDIA DRIVERS 314.22WHQL only.
Uninstall All nvidia items in Control Panel > Programs and features3D Vision Control Driver
3D Vision Driver
Graphics Driver
HD Audio Driver
PhysX
nvidia Update
(Are you using nvidia chipset drivers? If so, dont uninstall anything other than those are listed).
Now follow Drivers - Clean Left over Files after Uninstalling
Download 314.22 WHQL. While installing, Select Custom (Advanced) install. In the next page, follow this settings:
Also, test the RAM module for possible errors, too.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.
If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Let us know the results.

http://www.sevenforums.com/bsod-help-support/323368-really-tired-these-constant-random-bsods-ntoskrnl-exe-75bc0.html
Relevancy 83.42%

hello IT pros unfortunately i get a BSOD from time to time on my laptop the error s turn up randomly sometimes when i'm not even 0x0000000a random BSOD ntoskrnl.exe+75bc0 [SOLVED] IRQL_NOT_LESS_OR_EQUAL around or just browsing the web i have this problem since i installed windows so there is no other [SOLVED] random BSOD IRQL_NOT_LESS_OR_EQUAL 0x0000000a ntoskrnl.exe+75bc0 older working restore point harddrive seems fine chkdsk gave no errors also i tried different drivers no luck so far also there is [SOLVED] random BSOD IRQL_NOT_LESS_OR_EQUAL 0x0000000a ntoskrnl.exe+75bc0 no newer BIOS OS - Windows x -bit or x x What was the original installed OS on sthe ystem Windows Is the OS an OEM version i purchased it from retailer Approximate age of system less than year old laptop os installed months ago Have you re-installed the OS yes CPU Intel i - M Video Card Intel HD MotherBoard Acer Aspire E - System Manufacturer Acer Exact model number Aspire E - SysnativeBSODCollectionApp exe stops working here after quot Autoruns D O N E quot it's coming up with quot Waiting for SystemInfo quot every secs forever i tried twice with the same result So i zipped manually what was done so far any help is highly appreciated thanks in advance thomas

A:[SOLVED] random BSOD IRQL_NOT_LESS_OR_EQUAL 0x0000000a ntoskrnl.exe+75bc0

Hi,

IRQL_NOT_LESS_OR_EQUAL (a)

This indicates that Microsoft Windows or a kernel-mode driver accessed paged memory at DISPATCH_LEVEL or above.


Code:

1: kd> .trap 0xfffff880089cd8c0
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000002 rbx=0000000000000000 rcx=fffff88002f00180
rdx=fffffa800b072fe0 rsi=0000000000000000 rdi=0000000000000000
rip=fffff800032dbe52 rsp=fffff880089cda50 rbp=0000000000000000
r8=0000000000000000 r9=fffffa8009d9bc40 r10=fffffa8009d9bc40
r11=fffff880089cdae0 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei pl nz ac po cy
nt!KiSignalSynchronizationObject+0x42:
fffff800`032dbe52 488b3f mov rdi,qword ptr [rdi] ds:00000000`00000000=????????????????
Failure moving the contents of the rdi register into rdi, this makes no sense of course.

1. In your loaded drivers list, dtsoftbus01.sys is listed which is the Daemon Tools driver. Daemon Tools is a very popular cause of BSOD's in 7/8 based systems. Please uninstall Daemon Tools. Alternative imaging programs are: MagicISO, Power ISO, etc.

2. Uninstall KProcessHacker as it's likely conflicting with TrueCrypt.

3.


Code:

1: kd> lmvm auuzplzn
start end module name
fffff880`085ad000 fffff880`085fe000 auuzplzn (deferred)
Image path: auuzplzn.SYS
Image name: auuzplzn.SYS
Timestamp: Tue Sep 10 09:56:12 2013
No idea what this driver is, and there's no documentation regarding it. Run a Malwarebytes free scan:

https://www.malwarebytes.org/

Regards,

Patrick

http://www.techsupportforum.com/forums/f299/solved-random-bsod-irql_not_less_or_equal-0x0000000a-ntoskrnl-exe-75bc0-905114.html
Relevancy 83.42%

Hello I area in 0x00000050 ntoskrnl.exe+75bc0 BSOD nonpaged pagefault have a new user built PC with fresh install of windows home premium bit I have the bare minimum of programs installed such as Adobe BSOD pagefault in nonpaged area 0x00000050 ntoskrnl.exe+75bc0 Reader XI Panda Free Antivirus Google Chrome and HDHomerun I also have two external hard drives with data media In addition to receiving BSOD about once or twice per day often while the PC is idle I have also noticed Windows Media Center is disconnecting from my xbox extender after a few minutes Not sure if that is a separate issue or not Windows is fully updated with automatic updates turned on Most drivers were from motherboard support disc and most are updated All firmware is updated I believe Memtest passes times overnight with zero errors Seatools and dskchk show no hard drive errors i tested them all Furmark and Intel Burn test were run for about minutes with no crashes artifacts or lockups I replaced the power supply for good measure--no changes I'm really at a loss--I feel I've tested all hardware sufficiently but if I'm missing something please help I'm thinking it's a software issue conflict but I'm almost bare bones so can't figure out what Thanks for lending your expertise to my problem I appreciate any assistance you can offer Thanks Tim System i - k stock ASUS z pro XFX r x DD stock x gb G Skill ripjaws x ddr - Samsung SSD evo gb OS programs Antec trio PS

A:BSOD pagefault in nonpaged area 0x00000050 ntoskrnl.exe+75bc0

One other odd thing I have noticed multiple times. I have the monitor set to sleep after 10 minutes, and the computer is set to never sleep. I've found the monitor off after I've been AFK for a while (as it should be after 10 minutes), and when I return and move the mouse or hit the keyboard, the monitor doesn't power on. The mouse light is on, the case power light is on and I hear fans, the disc drives open, etc., but no signal to monitor. Toggling the power on the monitor does nothing. Also, the sleep button on the keyboard does not put the PC to sleep as usual. So it's like it's frozen, but in a way it isn't? This doesn't happen every time, but occasionally.

http://www.sevenforums.com/bsod-help-support/354780-bsod-pagefault-nonpaged-area-0x00000050-ntoskrnl-exe-75bc0.html
Relevancy 83.42%

Hello,

This morning when i woke up when i switched my pc's monitor i got those beloved letters.My computer was on idle,probably it fell asleep.The settings on power options were on Balanced mode.Pc is on stock clocks.No overclock made.
Heres the minidump file.
Notice: this happened a couple of days once i updated lots of windows updates.

A:BSOD - Driver power state failure - ntoskrnl.exe+75bc0

Welcome to the Forum.

AVG is contributing to your BSOD. Please remove it for testing purpose. Use Microsoft Security Essentials.

Recommended from a strict BSOD perspective, compatibility & stability compared to other security software:

Microsoft Security Essentials - Free Antivirus for Windows

Malwarebytes - Free

Good and Free system security combination.

Reduce items at start-up: Startup Programs - Change

Perform a clean boot: Troubleshoot Application Conflicts by Performing a Clean Startup

Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable!:-

Rt64win7.sys Thu Feb 26 15:04:13 2009 (49A65B0D)
Realtek RTL8168D/8111D Family PCI-E Gigabit Ethernet NIC
Driver Reference Table - Rt64win7.sys

Perform a clean install of a driver following: How to Clean Left Over Driver Files with Driver Sweeper

Use Revo Uninstaller to uninstall stubborn software. Opt for Advance Mode while uninstalling which allows leftover registry removal:Download Revo Uninstaller Freeware - Free and Full Download - Uninstall software, remove programs, solve uninstall problems

Scan with Kaspersky TDSSKiller:Anti-rootkit utility TDSSKiller

ESET online scanner: Free Online Virus Scanner | ESET

Run a System file check (SFC): SFC /SCANNOW Command - System File Checker

Run Disk Check on your Hard Drive(s): Disk Check

Check for heating issues using Speccy or HWmonitor

Upload a screen shot: Screenshots and Files - Upload and Post in Seven Forums


Code:
Built by: 7601.18247.amd64fre.win7sp1_gdr.130828-1532
Debug session time: Wed Feb 12 12:52:40.509 2014 (UTC + 6:00)
System Uptime: 1 days 6:05:36.431
BugCheck 9F, {3, fffffa800b1aeab0, fffff80000b9c518, fffffa800cf99e10}
*** WARNING: Unable to verify timestamp for atikmpag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmpag.sys
Probably caused by : atikmpag.sys
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
??????????????????????????????????????????????????????????????????????????????????????``

http://www.sevenforums.com/bsod-help-support/321780-bsod-driver-power-state-failure-ntoskrnl-exe-75bc0.html
Relevancy 83.42%

Hello all I am looking for help in debugging two issues which I have been getting for the past week I have the system Power Management set up to put the system to Sleep but when it goes to sleep I get a BSOD and the system shut downs When I try to shut down the system via Windows the Shut Down screen appears but the loading icon keeps running and the system never actually shuts down The BSOD Bug Check Code is x f and the Caused by Address is ntoskrnl exe bc I do not get these issues on ntoskrnl.exe+75bc0 ends never on for mode and Sleep Shutdown BSOD a Clean Boot so from what I have read I am guessing it is driver related but I am too novice to determine which driver it is I ran Windows Update and updated a bunch of the other equipment drivers but it hasn't helped Note I did install a new ASUS RT-AC U router and a HP Photosmart printer over the holidays but this issue did not appear right away after the install Diagnostics zip file attached Thanks in advance for any help -Rob

A:BSOD on Sleep mode for ntoskrnl.exe+75bc0 and Shutdown never ends

Hi Zarathud.

HP Photosmart 7520 series - Remove it from Startup.

And, Disable USB Selective Suspense too.
USB Selective Suspend - Turn On or Off

Uninstall MCAfee Security Scan Plus.

Also search in Dell using your service tag .... if there is any Chipset and BIOS update for your model.

Let us know how the computer is running.
_______________________________________________________________________________________

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa8011908a00, fffff80004b2f518, fffffa800bf2c9e0}

Probably caused by : usbccgp.sys

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

DRIVER_POWER_STATE_FAILURE (9f)
A driver is causing an inconsistent power state.
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: fffffa8011908a00, Physical Device Object of the stack
Arg3: fffff80004b2f518, Functional Device Object of the stack
Arg4: fffffa800bf2c9e0, The blocked IRP

Debugging Details:
------------------
DRVPOWERSTATE_SUBCODE: 3

IMAGE_NAME: usbccgp.sys

DEBUG_FLR_IMAGE_TIMESTAMP: 52272385

MODULE_NAME: usbccgp

FAULTING_MODULE: fffff88004e75000 usbccgp

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

BUGCHECK_STR: 0x9F

PROCESS_NAME: System

CURRENT_IRQL: 2

STACK_TEXT:
fffff800`04b2f4c8 fffff800`035318d2 : 00000000`0000009f 00000000`00000003 fffffa80`11908a00 fffff800`04b2f518 : nt!KeBugCheckEx
fffff800`04b2f4d0 fffff800`034cc85c : fffff800`04b2f600 fffff800`04b2f600 00000000`00000000 00000000`00000002 : nt! ?? ::FNODOBFM::`string'+0x33af0
fffff800`04b2f570 fffff800`034cc6f6 : fffffa80`13e73580 00000000`004264fb 00000000`00000000 00000000`00000000 : nt!KiProcessTimerDpcTable+0x6c
fffff800`04b2f5e0 fffff800`034cc5de : 0000009e`0b61c437 fffff800`04b2fc58 00000000`004264fb fffff800`036411e8 : nt!KiProcessExpiredTimerList+0xc6
fffff800`04b2fc30 fffff800`034cc3c7 : 00000029`0e0babc2 00000029`004264fb 00000029`0e0bab18 00000000`000000fb : nt!KiTimerExpiration+0x1be
fffff800`04b2fcd0 fffff800`034b98ca : fffff800`0363ce80 fffff800`0364acc0 00000000`00000001 fffff880`00000000 : nt!KiRetireDpcList+0x277
fffff800`04b2fd80 00000000`00000000 : fffff800`04b30000 fffff800`04b2a000 fffff800`04b2fd40 00000000`00000000 : nt!KiIdleLoop+0x5a
STACK_COMMAND: kb

FOLLOWUP_NAME: MachineOwner

FAILURE_BUCKET_ID: X64_0x9F_3_usbscan_IMAGE_usbccgp.sys

BUCKET_ID: X64_0x9F_3_usbscan_IMAGE_usbccgp.sys

Followup: MachineOwner
---------

0: kd> !irp fffffa800bf2c9e0
Irp is active with 8 stacks 6 is current (= 0xfffffa800bf2cc18)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 0000... Read more

http://www.sevenforums.com/bsod-help-support/318059-bsod-sleep-mode-ntoskrnl-exe-75bc0-shutdown-never-ends.html
Relevancy 82.56%

I bought my computer last year Custom build Everything was working fine until January th this year I experienced my first BSOD on this machine I've tried rolling back graphics drivers which were the only ones BSOD Sparse Win7-64bit (hal.dll+12a3b, 0x00000124 ntoskrnl.exe+75bc0) I had installed recently and it didn't help because days later the same BSOD happened The next BSOD didn't happen for another month And recently this is my th one that I am attaching in the log compilation The other dmp's were Sparse BSOD 0x00000124 (hal.dll+12a3b, ntoskrnl.exe+75bc0) Win7-64bit erased by me Sparse BSOD 0x00000124 (hal.dll+12a3b, ntoskrnl.exe+75bc0) Win7-64bit by accident but they all said the same thing when I opened them in BlueScreenView I will try reseating hardware and more stress tests when I have time but I'm really lost here as its such a sparse occurrence that it makes it really hard for me to test in a reasonable amount of time I'm hoping someone here can see what my inexperienced eyes are missing Here's what I do know - I didn't install any drivers for a while month or so other than the nvidia driver which I rolled back - I am not overclocking and just running stock and default BIOS Though since my rd BSOD I have turned on XMP for my RAM didn't make anything worse I guess - The BSOD happens very randomly Twice while I was playing fairly low resource demanding games Once while I was just on desktop dragging organizing files And most recently Sparse BSOD 0x00000124 (hal.dll+12a3b, ntoskrnl.exe+75bc0) Win7-64bit while browsing Twitch tv on Chrome There seems to be nothing in common which is really frustrating - It doesn't seem to be related to how long my computer has been running The most recent happened minutes after turning my computer on - I have a minor suspicion it could be my sound because it's always given me issues distorting not being detected randomly at startup But it is onboard and I have no idea how to begin testing it I will post updates as I perform further tests will be running memtest thru the night last time only ran for hours Please let me know any good suggestions Thanks a lot

A:Sparse BSOD 0x00000124 (hal.dll+12a3b, ntoskrnl.exe+75bc0) Win7-64bit

I apologize ahead of time for losing the other 3 memory dumps, though they all appeared the same I'm sure there was useful information in there. I deleted them by accident via diskcleanup utility. I will post memory dmps as they happen in this thread, but for now if anyone sees a potential problem or has any advice to test please let me know.

http://www.sevenforums.com/bsod-help-support/328551-sparse-bsod-0x00000124-hal-dll-12a3b-ntoskrnl-exe-75bc0-win7-64bit.html
Relevancy 82.56%

I am working on a laptop that has been getting random BSOD usually while nothing special is running. I have run memory checks, several antivirus scans to remove a lot of malware and trojans. Finally at my wits end with this. I would very much appreciate it if someone could point me in the right direction as to what is causing it.

Acer Aspire 7750-6669
Intel Core I3-2350M
6GB memory
1TB

Thanks in advance
Whyastarin

A:Random BSOD multiple errors ntoskrnl.exe+75bc0 bug check 0x00000101

Hello whyastarin .

Please remove IRST:

Code:
lmvm iaStor
Browse full module list
start end module name
fffff880`0109b000 fffff880`011ef000 iaStor T (no symbols)
Loaded symbol image file: iaStor.sys
Image path: \SystemRoot\system32\drivers\iaStor.sys
Image name: iaStor.sys
Browse all global symbols functions data
Timestamp: Thu Jan 13 03:50:12 2011
Driver Reference Table - iaStor.sys







  
Quote: Originally Posted by Arc


Get rid of intel rapid storage. First uninstall it from Control Panel > Programs and Features.
Then Uninstall the driver from device manager.

Right click on "my computer" icon and click "manage" on the context menu.
It will open the "computer management" window.
Select "Device Manager" in the left pane, It will list all the existing devices up.
Expand "IDE ATA/ATAPI controllers" by clicking on the triangle in front of it.
Select one Intel device item under it, right click, uninstall.
Continue the process for all Intel items under "IDE ATA/ATAPI controllers"
Now restart the computer. At restart, windows will auto configure the appropriate native system driver.


Remove AVAST:
Remove Avast Anti-Virus following this article - avast! Uninstall Utility | Download aswClear
Install Microsoft Security Essentials as an alternative.


Missing SAS (SuperAntiSpyware) files:

Code:
SASDIFSV ROOT\LEGACY_SASDIFSV\0000 This device is not present, is not working properly, or does not have all its drivers installed.
SASKUTIL ROOT\LEGACY_SASKUTIL\0000 This device is not present, is not working properly, or does not have all its drivers installed.
Please reinstall.
Cleanup your startup:
Troubleshoot Application Conflicts by Performing a Clean Startup

Are you using Norton Online Backup?, if not please remove!

Code:
Start Menu\Programs\Norton Online Backup

Keep us posted .

http://www.sevenforums.com/bsod-help-support/312481-random-bsod-multiple-errors-ntoskrnl-exe-75bc0-bug-check-0x00000101.html
Relevancy 73.1%

Hello,

Just had second BSOD in two weeks. Never had anything like that before (I work on my laptop for three years now).

BlueScreenView suggests ntoskrnl.exe+75bc0 driver problem.

Please find attached the SF tool output.

Please help.

Thank you and best regards,
Valerik

A:ntoskrnl.exe+75bc0

Welcome to the Forum.

Please update these drivers:


Code:
SMIEXP.SYS Wed Jan 16 16:06:19 2008 (478DD71B)
Lenovo EasyCamera
Driver Reference Table - SMIEXP.SYS


Code:
WDMirror.sys Tue Jun 17 12:37:30 2008 (48575BAA)
May be Lenovo RMCT Display Driver
Driver Reference Table - WDMirror.sys


Code:
NETw5s64.sys Wed Jan 13 22:37:13 2010 (4B4DF6B9)
Intel 5100 wifi
Driver Reference Table - NETw5s64.sys

Perform a clean install of a driver following: How to Clean Left Over Driver Files with Driver Sweeper

Reduce items at start-up: Startup Programs - Change

Perform a clean boot: Troubleshoot Application Conflicts by Performing a Clean Startup

Scan with Kaspersky TDSSKiller: Anti-rootkit utility TDSSKiller &

ESET online scanner: Free Online Virus Scanner | ESET

Run Disk Check on your Hard Drive(s): Disk Check

Run a System file check (SFC): SFC /SCANNOW Command - System File Checker

Let us know the results.

http://www.sevenforums.com/bsod-help-support/313187-ntoskrnl-exe-75bc0.html
Relevancy 72.24%

I've had this machine for six months and today (10/3) marks the first BSOD I've had, which occurred while I was browsing online. It may seem like I'm jumping the gun on this ? ony one BSOD ? but I couldn't find anything on the forum that seemed to specifically match this and I was thinking it might be nice to nip it in the bud.

DRIVER_POWER_STATE_FAILURE
0x0000009f 00000000`00000003 fffffa80`0b10cbf0 fffff800`0488a3d8 fffffa80`091dd860
ntoskrnl.exe+75bc0
6.1.7601.18409 (win7sp1_gdr.140303-2144)

Fwiw, two changes were made to the system this week ? Adobe Extension Manager CC updated and KB3001554 was installed, both on 10/2.

DM Log attached.

Thanks in advance.

A:DRIVER_POWER_STATE_FAILURE ntoskrnl.exe + 75bc0

Attachment 335512

http://www.sevenforums.com/bsod-help-support/347644-driver_power_state_failure-ntoskrnl-exe-75bc0.html
Relevancy 72.24%

Dears I have purchased years back and from that I am facing BSOD I have searched ntoskrnl.exe+75bc0 IRQL_NOT_LESS_OR_EQUAL a lot but cannot find any solution I have checked hard drive with IRQL_NOT_LESS_OR_EQUAL ntoskrnl.exe+75bc0 error-checking tool in windows but it shows OK I also completely service the laptop and apply proper thermal paste and do all stuff to eliminate all issues if it occurs because of improper ventilation But nothing helpful for me Then I unplug RAM from a slot and BSOD was not happening as much like before But from few weeks it is happening again as I did not attached that RAM again but cannot able to understand that why this error occurs again and again Unfortunately I have performed disk-cleanup - days ago so I just have dump files which I am attaching Sometime BSOD occurs but dump file won't able to store in dump folder and then I need to shut off the system by holding the power button I have search on internet and some share software to check harddrive using this software and this shows quot Air Flow Temperature quot which is highlighted in red color Does it is the cause of BSOD Please any one review my dump files and help me to resolve the issue Thanks in Advance Umar

A:IRQL_NOT_LESS_OR_EQUAL ntoskrnl.exe+75bc0

Hi,

Can you please run Seatools?
SeaTools | Seagate

You can run it via Windows or DOS. Do note that the only difference is simply the environment you're running it in. In Windows, if you are having what you believe to be driver related issues that may cause conflicts or a false positive, it may be a wise decision to choose the most minimal testing environment (DOS). I always recommend running Seatools in DOS if absolutely possible.

-- Run all tests EXCEPT: Fix All and anything Advanced.

Regards,

Patrick

http://www.techsupportforum.com/forums/f299/irql_not_less_or_equal-ntoskrnl-exe-75bc0-908122.html
Relevancy 72.24%

lately i'm getting alot of BSOD. I have attached the DMP.
Any suggestions please?

A:DRIVER_POWER_STATE_FAILURE ntoskrnl.exe + 75bc0

Welcome to the forum rickly,

Looks like you reinstalled windows sometime back. Did you happen to update the Realtek USB Card Reader after that?


Code:
Microsoft (R) Windows Debugger Version 6.2.9200.20512 X86
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Downloads\RICKLY-PC-Tue_10_21_2014__11049_35\102014-22760-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff8a0`00224622?
DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff8a0`03212c32?
DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff8a0`03359682?
DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff8a0`028d4c32?
DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff800`00b9a3c0?
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.18526.amd64fre.win7sp1_gdr.140706-1506
Machine Name:
Kernel base = 0xfffff800`03059000 PsLoadedModuleList = 0xfffff800`0329c890
Debug session time: Mon Oct 20 23:51:54.131 2014 (UTC + 6:00)
System Uptime: 0 days 0:17:21.520
Loading Kernel Symbols
...............................................................
................................................................
....................................
Loading User Symbols
Loading unloaded module list
.........
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa8006cbc060, fffff80000b9a3d8, fffffa8006680c60}

*************************************************************************
*** ***
*** ***
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: USBHUB!_DEVICE_EXTENSION_PDO ***
*** ***
*************************************************************************
Unable to load image \SystemRoot\System32\Drivers\RtsUStor.sys, Win32 error 0n2
*** WARNING... Read more

http://www.sevenforums.com/bsod-help-support/349550-driver_power_state_failure-ntoskrnl-exe-75bc0.html
Relevancy 72.24%

I came to ntoskrnl.exe+75bc0 MEMORY_MANAGEMENT this site ntoskrnl.exe+75bc0 MEMORY_MANAGEMENT searching for help on an ntoskrnl exe bc MEMORY MANAGEMENT error I have run the longest test x memtest -usb booted PC from a USB flash drive and did not discover any errors related to the SDRAM I determined this was the error from BlueScreenView exe I followed the same directions supplied by the moderator whom helped another gent determine that he had bad SDRAM who had the same errors and am hoping that he could have a look at ntoskrnl.exe+75bc0 MEMORY_MANAGEMENT my Speccy profile and uploaded results file Here is a link to the Speccy profile I just generated and uploaded using v -bit version of Speccy http speccy piriform com results C Mq IynvW oBu bsORhvNv I have also uploaded the Result txt file that was generated from MiniToolBox File version Product version by selecting List last Event Viewer Errors List Installed Programs List Users Partitions and Memory size Thank you in advance for your time and effort in helping me determine if this issue is SW driver FW Bios or HW related Best regards David Grant p s - the user Dick is my father in law whom I am helping to debug why the computer randomly keeps restarting every day or so Pasted MTB data into post deleted attachment - Hamluis MiniToolBox by Farbar Version - - Ran by Dick administrator on - - at Running from C Users Dick Downloads Microsoft Windows Professional Service Pack X Boot Mode Normal Event log errors Application errors Error AM Source Application Error User Description Faulting application name PlexNewTranscoder exe version time stamp x Faulting module name PlexNewTranscoder exe version time stamp x Exception code xc Fault offset x ba e Faulting process id xcb Faulting application start time xPlexNewTranscoder exe Faulting application path PlexNewTranscoder exe Faulting module path PlexNewTranscoder exe Report Id PlexNewTranscoder exe Error AM Source Application Error User Description Faulting application name PlexNewTranscoder exe version time stamp x Faulting module name PlexNewTranscoder exe version time stamp x Exception code xc Fault offset x ba e Faulting process id x c Faulting application start time xPlexNewTranscoder exe Faulting application path PlexNewTranscoder exe Faulting module path PlexNewTranscoder exe Report Id PlexNewTranscoder exe Error AM Source Application Error User Description Faulting application name PlexNewTranscoder exe version time stamp x Faulting module name PlexNewTranscoder exe version time stamp x Exception code xc Fault offset x ed Faulting process id xf Faulting application start time xPlexNewTranscoder exe Faulting application path PlexNewTranscoder exe Faulting module path PlexNewTranscoder exe Report Id PlexNewTranscoder exe Error AM Source Application Error User Description Faulting application name PlexNewTranscoder exe version time stamp x Faulting module name pthreadGC dll version time stamp x f Exception code xc Fault offset x Faulting process id x Faulting application start time xPlexNewTranscoder exe Faulting application path PlexNewTranscoder exe Faulting module path PlexNewTranscoder exe Report Id PlexNewTranscoder exe Error AM Source Application Error User Description Faulting application name PlexNewTranscoder exe version time stamp x Faulting module name PlexNewTranscoder exe version time stamp x Exception code xc Fault offset x ba c Faulting process id x a Faulting application start time xPlexNewTranscoder exe Faulting application path PlexNewTranscoder exe Faulting module path PlexNewTranscoder exe Report Id PlexNewTranscoder exe Error AM Source Application Error User Description Faulting application name PlexNewTranscoder exe version time stamp x Faulting module name PlexNewTranscoder exe version time stamp x Exception code xc Fault offset x d b Faulting process id x Faulting application start time xPlexNewTranscoder exe Faulting application path PlexNewTranscoder exe Faulting module path PlexNewTranscoder exe Repor... Read more

A:ntoskrnl.exe+75bc0 MEMORY_MANAGEMENT

I will not download anything to my computer unless I know exactly what it contains.  Please follow the instructions below and post the results in your topic.  Do not wrap it in code or use quotes.
 
Please download MiniToolBox, save it to your desktop and run it.
 
Checkmark the following checkboxes:
 
• List last 10 Event Viewer log
• List Installed Programs
• List Users, Partitions and Memory size.
• List Minidump Files
 
Click on Go to start the scan.  Once it is finished highlight the text, copy it and paste it in your next post.

http://www.bleepingcomputer.com/forums/t/557232/ntoskrnlexe75bc0-memory-management/
Relevancy 71.38%

In the recent 2 weeks I'm getting around 2-3 BSOD per day
Could anyone help me regarding this, the laptop is almost 1M old, a Lenovo B5400.

A:BSDO DRIVER_POWER_STATE_FAILURE ntoskrnl.exe + 75bc0

Hi rickly.

The post is not made following the Blue Screen of Death (BSOD) Posting Instructions. So we are having an incomplete view of the situation only.

Moreover, there are multiple bugchecks.

Anyway, disable bluetooth in device manager. Disable the card reader, too. These two are causing the issues there, and mostly those are not needed.

If you must to use those, try for updates from Laptops and netbooks :: Lenovo B Series laptops :: Lenovo B5400 Notebook :: 20278 - Lenovo Support (US) .... but I will suggest you disable those.

Let us know for any further BSOD, properly.
___________________________________________

Code:
BugCheck A, {0, 2, 1, fffff800030cd97c}

*** WARNING: Unable to verify timestamp for RtkA2dp.sys
*** ERROR: Module load completed but symbols could not be loaded for RtkA2dp.sys
Probably caused by : RtkA2dp.sys ( RtkA2dp+15b9c )

Followup: MachineOwner
---------

Code:
BugCheck 9F, {3, fffffa80077d7060, fffff80000b9a3d8, fffffa8007e51c60}

Unable to load image \SystemRoot\System32\Drivers\RtsUStor.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for RtsUStor.sys
*** ERROR: Module load completed but symbols could not be loaded for RtsUStor.sys
Probably caused by : usbhub.sys

Followup: MachineOwner
---------

http://www.sevenforums.com/bsod-help-support/350536-bsdo-driver_power_state_failure-ntoskrnl-exe-75bc0.html
Relevancy 71.38%

I have been getting BSODs everyday now for the past 2 days.
They happen randomly whether im playing a game, watchin a stream, or just sitting on my computer.
Any help would be much appreciated.

A:Multiple BSODs al from ntoskrnl.exe+75bc0

Please provide detailed system specifications as per this tutorial:
System Info - See Your System Specs

http://www.sevenforums.com/bsod-help-support/325558-multiple-bsods-al-ntoskrnl-exe-75bc0.html
Relevancy 71.38%

Hello I know you have in Crashes 50+ One Month ntoskrnl.exe+75bc0 probably had to answer million of these questions but I am just frustrated and stumped I have been building and working with PC's for nearly years but this is just messing with me I have an old PC using it for now while new PC parts are shipped for a new rig psyched Once those come in I am turning 50+ ntoskrnl.exe+75bc0 Crashes in One Month this one over to my teen daughter for school work and what not I am unsure if it is a driver issue or software issue I am hoping to just start from the beginning and weed out the problem So please be patient with me This is a compact report of the problem generated using ' BluescreenView' Dump File - - dmp Crash Time Bug Check String IRQL NOT LESS OR EQUAL Bug Check Code x a Parameter fffff daf b Parameter Parameter Parameter fffff daf b Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe bc File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win sp gdr - Processor x Crash Address ntoskrnl exe bc Stack Address Stack Address Stack Address Computer Name Full Path C Windows MiniDump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File Time And a link to the actual dump file is HERE Anything else you might need I will quickly and easily provide Thanks in advance for any help you can give

A:50+ ntoskrnl.exe+75bc0 Crashes in One Month

Follow the instructions here> http://www.techsupportforum.com/foru...ta-452654.html
Lets see if the BSOD dump file(s) can tell us whats going on.

http://www.techsupportforum.com/forums/f299/50-ntoskrnl-exe-75bc0-crashes-in-one-month-939186.html
Relevancy 71.38%

I built a new machine about weeks ago MAchine booted up fine and ran with no issues All drivers installed fine no errors A few days later i started getting minidump errors when coming to my machine after it was sitting idle for a time So i dont turn my machine off at night I have been having Random crashes ALWAYS when the machine is idle If i am physically using the machine ie browsing gaming etc no crash if i walk aways for a time and leave it running i till come back to a your machine has recovered from a serious error message saying the error occured x hal dll a b and ntoskrnl exe bc I have removed all components blown out all the sockets and replaced them making sure each one is properly seated in the sockets I am using an after market Cooler on the CPU real temp shows the temps are normal though i dont know if this ever changes Only going by the real temp display on my notification bar All fans are running ntoskrnl exe bc and set to full speed Machine has crashed times since the th july all for same error Hope someone can help cause i am stumped minidumps are here http ppl ug YUexjn SeU Speccy http speccy piriform com results gR YnYI cglguXyCSkTCY Minidump attached nbsp minitool dump txt nbsp nbsp KB nbsp nbsp downloads

A:0x00000124 Error on Hal.dll and ntoskrnl.exe+75bc0

Googling a bit seems to point to hardware issues, the fact that it only happens when you leave the computer on alone but not when you are using it would point me to think there's something going on with powersaving options, not sure tough, are you overclocking your processor?
 
Maybe it has to do with so many harddrives plugged in at one and hard drive power saving features, but i'm no expert tough.

http://www.bleepingcomputer.com/forums/t/543018/0x00000124-error-on-haldll-and-ntoskrnlexe75bc0/
Relevancy 70.52%

I've been getting several constant BSODS as of late in the middle of doing work. Every I get the crash it says "MEMORY_MANAGEMENT". I have already ran Memtest on my system about 10 times and nothing came up at all. I looked up on BlueScreenView and it says that ntoskrnl.exe+75bc0.exe is at fault. Any ideas as to what to do to remedy this?

A:Constant BSODS (ntoskrnl.exe+75bc0) at fault

  
Quote: Originally Posted by sixty01


I've been getting several constant BSODS as of late in the middle of doing work. Every I get the crash it says "MEMORY_MANAGEMENT". I have already ran Memtest on my system about 10 times and nothing came up at all. I looked up on BlueScreenView and it says that ntoskrnl.exe+75bc0.exe is at fault. Any ideas as to what to do to remedy this?


Before we start, can you tell us which program you ran to test the memory and for how long?
A link of the program would be a nice explanation.

And, 10 times ... what does it exactly mean? You tested the memory for ten different instances?

Please let us know. This information would be very vital.

http://www.sevenforums.com/bsod-help-support/370947-constant-bsods-ntoskrnl-exe-75bc0-fault.html
Relevancy 70.09%

Hello guys the last week I ve been strugling with these nasty BSODs At first I thought it was my HDDs as ntoskrn exe somewhat hinted towards that from googling it My HDDs have been causing a lot of trouble earlier as well due "ntoskrnl.exe" header", BSOD management", pool "Bad "Memory - to their somewhat long years of service However I ve recently reformated my computer and installed W on a brand new Corsair Force GT GB SSD hoping the BSODs would go away they didn t I googled BSOD - "Memory management", "Bad pool header", "ntoskrnl.exe" BSOD and I stumbled upon this forum and I thought I d give it a try I m somewhat desperate as I need my computer working for both work school and amusement I ve been trying to run Memtest in order to test my memory BSOD - "Memory management", "Bad pool header", "ntoskrnl.exe" but without any results I m also currently running on only on GB chip instead BSOD - "Memory management", "Bad pool header", "ntoskrnl.exe" of two to see if the problem still exists Also without any results This is the second time I m writing this thread btw I was just about to post it and my PC crashed Here is my two logs dxdiag last crash didn t generate a log oddly enough Here is additional hardware gear that I use Razer Megalodon Headset Razer Naga Logitech G Logitech C Webcam Corsair W PSU My temperatures are also good Both CPU and MB idles at around GPU s all good too I m also using a Corsair D chassi with dustfilters at both air-income so dust is minimal On top off this I use airpressure to clean away dust somewhat regularly and I also did exactly this days ago when I reinstalled the pc Thanks in advance nbsp

A:BSOD - "Memory management", "Bad pool header", "ntoskrnl.exe"

Are you over-clocking? Is the bios set to its defaults? Is the SSD set on a SATA 3 port in AHCI mode?
 

http://www.techspot.com/community/topics/bsod-memory-management-bad-pool-header-ntoskrnl-exe.182278/
Relevancy 69.66%

I seem to be getting seemingly random bluescreens mainly during booting or after - minutes It will blue screen about times then work fine for days on end The blue screen bug check strings seem to vary PAGE BSODs of - ntoskrnl.exe+75bc0 Lots address crash FAULT IN NONPAGED AREA x fffff dc ea fffff dc ea umbus sys umbus sys e f ntoskrnl exe Lots of BSODs - crash address ntoskrnl.exe+75bc0 b x PAGE FAULT IN NONPAGED AREA x fffff fffff ed ntoskrnl exe ntoskrnl exe b ntoskrnl exe b x PAGE FAULT IN NONPAGED AREA x a iusb xhc sys iusb xhc sys b aae ntoskrnl exe bc x PAGE FAULT IN NONPAGED AREA x fffff c f fffff d ntoskrnl exe ntoskrnl exe bc ntoskrnl exe bc x SYSTEM SERVICE EXCEPTION x b c fffff c fffff fef fltmgr sys fltmgr sys c ntoskrnl exe bc x PAGE FAULT IN NONPAGED AREA x fffff ec ea fffff ec ea igdkmd sys igdkmd sys f ntoskrnl exe bc x MEMORY MANAGEMENT x a fffff ddcc fffff c ntoskrnl exe ntoskrnl exe bc ntoskrnl exe bc x SYSTEM SERVICE EXCEPTION x b c fffff e a fffff df f RTKVHD sys RTKVHD sys fde f ntoskrnl exe bc x PAGE FAULT IN NONPAGED AREA x fffff fd f b fffff e f ntoskrnl exe ntoskrnl exe bc ntoskrnl exe bc x PAGE FAULT IN NONPAGED AREA x fffff ed ea fffff ed ea ntoskrnl exe ntoskrnl exe bc ntoskrnl exe bc x NTFS FILE SYSTEM x fb fffff a d fffff a fffff dffa Ntfs sys Ntfs sys ntoskrnl exe bc x MEMORY MANAGEMENT x a fffffa bc ffff RTKVHD sys RTKVHD sys ccb d ntoskrnl exe bc x PAGE FAULT IN NONPAGED AREA x fffff a ae ec fffff cac ntoskrnl exe ntoskrnl exe bc ntoskrnl exe bc x PAGE FAULT IN NONPAGED AREA x fffffa cb a fffff feb e AgileVpn sys AgileVpn sys e ntoskrnl exe bc x PAGE FAULT IN NONPAGED AREA x fffff b fffff e d usbhub sys usbhub sys da ed ntoskrnl exe bc x PAGE FAULT IN NONPAGED AREA x fffff e fffff ecd d luafv sys luafv sys d ntoskrnl exe bc x KMODE EXCEPTION NOT HANDLED x e ffffffff c fffff a d ntoskrnl exe ntoskrnl exe bc ntoskrnl exe bc x SYSTEM SERVICE EXCEPTION x b c fffff a fffff b d iusb xhc sys iusb xhc sys d ntoskrnl exe bc x PAGE FAULT IN NONPAGED AREA x fffff c dac fffff ead iusb xhc sys iusb xhc sys ntoskrnl exe bc x MEMORY MANAGEMENT x a fffff d e e fffffa f serscan sys serscan sys b e e ntoskrnl exe bc x MEMORY MANAGEMENT x a fffff RTKVHD sys RTKVHD sys b ntoskrnl exe bc x MEMORY MANAGEMENT x a fffffa a bcbc ffff ntoskrnl exe ntoskrnl exe bc ntoskrnl exe bc x MEMORY MANAGEMENT x a e fffff fltmgr sys fltmgr sys f ntoskrnl exe bc x PAGE FAULT IN NONPAGED AREA x fffff e dc e f fffff b serscan sys serscan sys a b e ntoskrnl exe bc x PAGE FAULT IN NONPAGED AREA x fffff e d d fffff a HDAudBus sys HDAudBus sys fef d ntoskrnl exe bc x MEMORY MANAGEMENT x a fffffa a db ffff HDAudBus sys HDAudBus sys a d b ntoskrnl exe bc x I've tried running a memtest for about cycles and it came back fine I've also ran prime for hours and furmark for hours I've updated the intel graphics card driver to the latest version The bios and other drivers are all the latest available from gigabyte I've also done a sfc scannow which came back fine I also ran chkdsk a few times to clear out any errors caused by the improper shutdowns I'm not really sure whats causing the problem and really appreciate your feedback

A:Lots of BSODs - crash address ntoskrnl.exe+75bc0

Hi Kaxpix.

Yes, you have experienced a real lot of BSODs. Please perform the following, which will help us to go for the further troubleshooting in case.

Make it sure that the Samsung 840 series SSD is running with the up-to date firmware. See here: Samsung SSD (Solid State Drive) 840 series | Samsung SSD Website

ESET is failing there ....

Code:
fffff880`0264a6f8 fffff880`04a8e600Unable to load image epfwwfpr.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for epfwwfpr.sys
*** ERROR: Module load completed but symbols could not be loaded for epfwwfpr.sys
epfwwfpr+0x1f600
Description here: Driver Reference Table - epfwwfpr.sys

Uninstall ESET, at least as a test. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.
Download, install and update those, and then run full system scans with both of them, one by one.

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight. If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.
Then let us know how it is running. We need to take necessary actions depending on the situation then.

http://www.sevenforums.com/bsod-help-support/309718-lots-bsods-crash-address-ntoskrnl-exe-75bc0.html
Relevancy 64.93%

OS - Windows 7
? x64
? Original OS
? OEM
? Age of system Less than 2 years
? Age of OS installation - July 2009
? AMD Phenom II X4 940
? XFX HD 6970
? ASUS M4A79 Deluxe AM3/AM2+/AM2 AMD 790FX ATX AMD
? Power Supply - ABS Tagan BZ Series BZ1100 1100W ATX12V

Have come home from work everyday for the last week to a BSOD stating
memory management error.

A:BSOD Memory Management

Start off by running these diagnostic tests
1. Memtest86 - Run for 7-8 passes - RAM - Test with Memtest86+ - Windows 7 Forums
2. Prime95 - Run all three tests for 3-4 hours each - CPU - Stress Test with Prime95 - Windows 7 Forums
3. Hard drive scan using SeaTools

Report back any errors you receive from these tests.


Code:
ASACPI.sys Sun Mar 27 22:30:36 2005 (42476C4C)
The 2005 version of this driver is known to cause BSOD in Windows 7. Download the ATK0110 Utility from here. ASUSTeK Computer Inc. -Support- Drivers and Download P7P55D LE. It is under the utilities section. After installing it browse to C:\windows\system32\drivers and make sure the date of ASACPI.sys says 2009 and not 2005


Code:
RTCore64.sys Wed May 25 02:39:12 2005 (42941D90)
Uninstall Riva Tuner. Known problems with Win 7


Summary of dumps

Code:
Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Debug session time: Thu Mar 3 00:53:04.167 2011 (UTC - 4:00)
System Uptime: 1 days 1:17:17.416
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+4ac3 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x1a_41284
PROCESS_NAME: avp.exe
FAILURE_BUCKET_ID: X64_0x1a_41284_nt!_??_::FNODOBFM::_string_+4ac3
BaseBoardManufacturer = ASUSTeK Computer INC.
BaseBoardProduct = M4A79 Deluxe
????????????????????????????????????????????????????????????????????????????????
Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Debug session time: Tue Mar 15 08:40:35.517 2011 (UTC - 4:00)
System Uptime: 6 days 4:21:36.351
Probably caused by : memory_corruption ( nt!MiEmptyWorkingSet+1c5 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x50
PROCESS_NAME: avp.exe
FAILURE_BUCKET_ID: X64_0x50_nt!MiEmptyWorkingSet+1c5
BaseBoardManufacturer = ASUSTeK Computer INC.
BaseBoardProduct = M4A79 Deluxe
????????????????????????????????????????????????????????????????????????????????
Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Debug session time: Sat Apr 2 13:19:55.359 2011 (UTC - 4:00)
System Uptime: 0 days 20:00:27.623
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+4ac3 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x1a_41284
PROCESS_NAME: dwm.exe
FAILURE_BUCKET_ID: X64_0x1a_41284_nt!_??_::FNODOBFM::_string_+4ac3
BaseBoardManufacturer = ASUSTeK Computer INC.
BaseBoardProduct = M4A79 Deluxe
????????????????????????????????????????????????????????????????????????????????
Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Debug session time: Sat Apr 2 13:19:55.359 2011 (UTC - 4:00)
System Uptime: 0 days 20:00:27.623
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+4ac3 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x1a_41284
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0x1a_41284_nt!_??_::FNODOBFM::_string_+4ac3
BaseBoardManufacturer = ASUSTeK Computer INC.
BaseBoardProduct = M4A79 Deluxe

Code:
fffff880`0672f000 fffff880`0676d000 1394ohci 1394ohci.sys Sat Nov 20 05:44:56 2010 (4CE7A6A8)
fffff880`00f7d000 fffff880`00fd4000 ACPI ACPI.sys Sat Nov 20 04:19:16 2010 (4CE79294)
fffff880`0504e000 fffff880`050d7000 afd afd.sys Sat Nov 20 04:23:27 2010 (4CE7938F)
fffff880`05243000 fffff880`05259000 AgileVpn AgileVpn.sys Mon Jul 13 20:10:24 2009 (4A5BCCF0)
fffff880`01922000 fffff880`01970000 ahcix64s ahcix64s.sys Mon Sep 22 07:24:17 2008 (48D78061)
fffff880`05aec000 fffff880`05b00000 amdiox64 amdiox64.sys Thu Feb 18 10:17:53 2010 (4B7D5A21)
fffff880`05340000 fffff880`05355000 amdppm amdppm.sys Mon Jul 13 19:19:25 2009 (4A5BC0FD)
fffff880`00c83000 fffff880`00c8e000 amdxata amdxata.sys Fri Mar 19 12:18:18 2010 (4BA3A3CA)
fffff880`054dc000 fffff880`054e4000 ASACPI ASACPI.sys Sun Mar 27 22:30:36 2005 (42476C4C)
fffff880`05313000 fffff880`0531a000 AsIO AsIO.sys Mon Dec 17 04:11:49 2007 (47663D55)
fffff880`0b919000 fffff880`0b924000 asyncmac asyncmac.sys Mon Jul 13 20:10:13 20... Read more

http://www.techsupportforum.com/forums/f299/bsod-memory-management-564132.html
Relevancy 64.93%

I'm having problems with a persistent BSOD from my RAM. I read that I should run the memtest to see if I have problems with my RAM, and I do, but I'm not sure what to do after I know I have problems. Can someone help me?

The memtest said I had somewhere around 1000 errors with my RAM but I stopped it after 2 hours. I wasn't really sure if it just cycled or if it took that long to test 4GB of RAM.
 

A:Memory Management BSOD: Win 7

Hi and welcome to TSG how did you run the test ie with all 4GB in at one time or one stick at a time,it is best to do it one at a time then swap them over to the other socket and rerun,if you have errors you probably need get new ram http://www.overclockers.com/forums/showthread.php?t=409152
 

https://forums.techguy.org/threads/memory-management-bsod-win-7.931885/
Relevancy 64.93%

I am getting this error every time I try to render a video using Sony Vegas. I have rendered many videos and have never had any problems. First I tought it was Avast, so I uninstalled it. But it still crashes.

I have ran Disk Check and Memtest and no problems where found.

I have attached my minidumps. Thanks.

A:Memory Management BSOD

I note you said you ran Memtest but please run it again...

These crashes were caused by memory corruption/exception (Cx05) probably a driver.
Please run these two tests to verify your memory and find which driver is causing the problem.

* If you are overclocking anything reset to default before running these tests.
In other words STOP!!!

* If you have a Raid update its Driver.

Memtest.





Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5-7 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.



RAM - Test with Memtest86+


Driver Verifier






Quote:
Using Driver Verifier is an iffy proposition.
Most times it'll crash and it'll tell you what the driver is.
But sometimes it'll crash and won't tell you the driver.
Other times it'll crash before you can log in to Windows.
If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise.
Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation"IRP Logging and Force Pending I/O Requests. and click "Next"
NOTE: You can use Low Resource Simulation if you'd like.
From my limited experimentation it makes the BSOD's come faster.
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.
If you are using win 8 add these
- Concurrency Stress Test
- DDI compliance checking

Reboot the system and wait for it to crash to the Blue Screen.
Continue to use your system normally, and if you know what causes the crash, do that repeatedly.
The objective here is to get the system to crash because Driver Verifier is stressing the drivers out.
If it doesn't crash for you, then let it run for at least 36 hours of continuous operation.
Reboot into Windows (after the crash) and turn off Driver Verifier by going back in and selecting "Delete existing settings" on the first page, then locate and zip up the memory dump file and upload it with your next post.
If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.

Thanks to JCGriff2 & Usasma.

Sysnative Forums

Driver Reference Table (DRT)




Using Driver Verifier to identify issues with Windows drivers for advanced users

Driver Verifier

Using Driver Verifier (Windows Drivers)

http://www.sevenforums.com/bsod-help-support/232267-memory-management-bsod.html
Relevancy 64.93%

Hi,

I have been dealing with this problem for the last couple of days. I am getting issues mostly watching youtube or vlc. I have had the following blue screen after the new installation of windows.
MEMORY_MANAGEMENT
IRQL_NOT_LESS_OR_EQUAL
PFN_LIST_CORRUPT
PAGE_FAULT_IN_NONPAGED_AREA

This is a fresh install of window due to the previous Hard drive having problem. Test that have been done are : 4 Pass of memtest 86+ on each stick. sfc scan and malware scan. Can someone please help me.
I have attached dump file for analysis.

Thanks

A:BSOD Memory Management

BugCheck 1A, {41790, fffffa80005134b0, ffff, 0}
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+35084 )
??????????????????????????????????????????????????????????????????????????????????????``
BugCheck 1A, {41284, 2c409001, 2204180, fffff70001080000}
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+4ad3 )
??????????????????????????????????????????????????????????????????????????????????????``
BugCheck A, {fffff704400095ac, 0, 1, fffff8000210b4ac}
Probably caused by : memory_corruption ( nt!MiUpdateWsleHash+13c )
??????????????????????????????????????????????????????????????????????????????????????``
BugCheck 1A, {41284, 64009001, 220f180, fffff70001080000}
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+4ad3 )
??????????????????????????????????????????????????????????????????????????????????????``
BugCheck 4E, {99, 1dbe1, 0, 1964e2}
Probably caused by : memory_corruption ( nt!MiBadShareCount+4c )
??????????????????????????????????????????????????????????????????????????????????????``
BugCheck 1A, {41284, 17609001, 224c180, fffff70001080000}
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+4ad3 )
??????????????????????????????????????????????????????????????????????????????????????``
BugCheck 50, {ffffbe5000001da2, 0, fffff800020bfcec, 7}
Probably caused by : memory_corruption ( nt!MiCaptureProtectionFromProto+1c )
??????????????????????????????????????????????????????????????????????????????????????``
BugCheck 1A, {41790, fffffa8000515370, ffff, 0}
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+35148 )
??????????????????????????????????????????????????????????????????????????????????????``
BugCheck 50, {242bb000, 1, 726a01d0, 8}
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+45955 )
??????????????????????????????????????????????????????????????????????????????????????``


I would take memtest again, for longer and in the manner below:

Test and Diagnose RAM Issues with Memtest86+:RAM - Test with Memtest86+ Pay close attention to part 3 of the tutorial "If you have errors"


   Tip
Test the RAM with Memtest86+ for at least 7-10 passes. It may take up to 22 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold.



Upload a screenshot using:CrystalDiskInfo For how to upload a screenshot or file, read here

Test your Hard Drive by running:Hard Drive Diagnostic ProcedureRun Disk Check: Run Disk Check in Windows 7 for Bad Sectors & ErrorsUninstall your current antivirus as it is contributing to your BSOD's. Replace with Microsoft Security Essentials & the Free version of Malwarebytes, update and make full scans separately:Uninstallers (removal tools) for common antivirus software - ESET Knowledgebase

Microsoft Security Essentials - Microsoft Windows

Malwarebytes Free Do not start the trial version of MalwareBytes

You may also take a look at:Good & Free System Security CombinationAppleCharger.sys Wed Nov 2 08:46:00 2011

GIGABYTE On/Off Charge driver. See here for details - GIGABYTE ON/OFF Charge [br] May cause BSOD on Win7/8 systems - uninstall to test



   Note
Download and install Revo Uninstaller free from here: Download Revo Uninstaller FreewareOpt for "Advanced Mode" and uninstall the software (also delete the leftover registry entries).


Test your Hardware for Stability and Heat Problems with Prime95: Stress Test With Prime95 How to Stress Test a Video Card with Furmark:Video Card - Stress Test with FurmarkTest your CPU Stability with IntelBurnTest:CPU - Stress Test Using IntelBurnTestMonitor hardware temperature with system monitoring software like Speccy or HWMonitor during the stress tests:
Piriform - Speccy

CPUID - HWMonitor

http://www.sevenforums.com/bsod-help-support/298671-bsod-memory-management.html
Relevancy 64.93%

For the last few days, I've had BSOD every 4-5 hours of my computer on. Since it was set to automatic restart, I've only managed to see one of the BSOD reports which said 'Memory Management'.

After doing some research into the matter, I used MemTest86+ and got errors for my ram, which makes me think that this is a ram problem (and will need new ram). But I want to make sure that there isn't anything else wrong that I need to fix.

I'm attaching the diagnostic files. Thank you if you could help out and diagnose my problem.

System Specs
Windows 7 64 bit
Intel i7 2600k
8gb G Skill Ram
2X2TB Samsung F4 Drives
OCZ Vertex 120gb SSD
Asus Xonar Essence STX

A:BSOD - Memory Management

If MemTest is reporting any errors, then it is time to replace the ram ... On the up side, ram is dirt cheap, so it won't hurt too bad...

http://www.sevenforums.com/bsod-help-support/201326-bsod-memory-management.html
Relevancy 64.93%

Hey everyone, just registered here because I seem to be having a bit of an issue. I've been getting a "Memory Management" blue screen and I'm not exactly sure what is causing it. The only thing I have to go on is that I plugged in a printer 2 days ago and it started happening after that. So I'm beginning to think the printer is the culprit.

Hopefully I can get some help here because it's quite frustrating.

Thanks.
 

A:Memory Management BSOD

Hello are you using a desktop? if yes you can easily diagnose this by removing one of your RAMs and if you only have one RAM installed you may want to transfer it to another slot or simply replace it with a new RAM. Or one of the quickest thing you do is remove the printer because this is the possible reason as what you have mentioned. Is the printer connected using a USB cable? or is it sitting as a standalone printer and connected via your network?. Unfortunately I cannot open the file that you have attached this could have make a lot more easier to diagnose if I only I can open it.
choosehottubsdirect reviews
Ecommerce Conversions
 

https://forums.techguy.org/threads/memory-management-bsod.947297/
Relevancy 64.93%

For the past week BSoD Management) Help (Memory my Dell Inspiron has been experiencing many blue screens all saying Memory Management It crashes mostly during videos and streams but also during a Memory Stress test using Dell s PC Checkup i was running because of this Windows memory diagnostics test stated that it is BSoD (Memory Management) Help a hardware problem System Info OS Version Microsoft Windows Vista Home Basic Service Pack bit Processor Pentium R Dual-Core CPU T GHz x Family Model Stepping Processor Count RAM Mb Graphics Card Mobile Intel R Series Express Chipset Family Mb Hard Drives C Total - MB Free - MB E Total - MB Free - MB Motherboard Dell Inc G F Antivirus Norton Updated and Enabled What Microsoft windows said after the blue screen Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode a BCP BCP BA BCP D BCP C OS Version Service Pack Product Files that help describe the problem C Windows Minidump Mini - dmp C Users name AppData Local Temp WER- - sysdata xml C Users name AppData Local Temp WER D tmp version txt My computer automatically restarts when it goes to the blue screen so I don t have anymore info from there P S I am planning to get a new laptop but would like to get this one working nbsp

A:BSoD (Memory Management) Help

Not sure what you want. You'll need to replace the bad RAM, of course.
 

https://forums.techguy.org/threads/bsod-memory-management-help.1059594/
Relevancy 64.93%

I'm not sure of the format of asking a question in this forum so If I do anything wrong please take into account that I just registered Anyway I've been having tons of BSODs since I got this computer and I've tried reformatting the hard drive reinstalling Windows etc I've also tried rearranging the ram but nothing I've tried completely stops the BSODs Another thing I've noticed is every browser I use crashes randomly for no reason Such as Firefox IE Chrome Opera They all crash for no reason at all Even when I'm only using one tab This desktop computer was purchased on Costco com and ZT Systems was the custom pc builder The product others Memory BSOD and several Management if needed is ZT-MS SKU SS-DAF Specs are as follows from CPU-Z OS Windows Home Premium SP CPU AMD A - APU wih HD Radeon Graphics Motherboard MSI A MA-G MS- BIOS American Megatrends Inc Version V B Date Memory Crucial DDR x GB GB total PC - BSOD Memory Management and several others MHz Graphics ATI Radeon BSOD Memory Management and several others HD with MB APU has a D on chip graphics BSOD Memory Management and several others card with MB pulled this up myself Hard Drive TB RPM Hard Drive I have bluescreenview and noticed that ntoskrnl exe was the cause of many problems including Memory Management Bad POOL Header PFN List Corrupt I'm tech savvy when it comes to building a computer as well as troubleshooting most issues but when it comes to BSOD I usually use google I've read elsewhere about validating drivers and honestly I don't really want to go through hundreds of configurations in order to crash my computer If more information is required just let me know Kris

A:BSOD Memory Management and several others

Here is what I got from Bluescreenview.

http://www.techsupportforum.com/forums/f299/bsod-memory-management-and-several-others-686453.html
Relevancy 64.93%

Hello I'm running Vista x Full Retail version installed about year ago I just BSOD Management Memory upgraded components new motherboard ASUS P P D-E Pro and cpu intel core i GHz and G Skill MEM Gx GSKILL F - CL D- GBRL I have gotten the memory management BSOD about times now I have run memtest overnight on GB of my memory with no errors The memory is running at V MHz - - - - N The PC is running at GHz with BCLK speed MHz and cpu multiplier of Originally the memory was running at N so I changed it to N as that is what it is designed for and seemed to be running better but I still got the BSOD once afterwards I Opened the dump file and here are the results kd gt analyze -v Bugcheck Analysis MEMORY MANAGEMENT a Any other values for parameter must be individually examined Arguments Arg A PDE has been unexpectedly invalidated Arg fffffa a cd Arg Arg Debugging Details ------------------ Page d ef not present in the dump file Type quot hh dbgerr quot for details BUGCHECK STR x a DEFAULT BUCKET ID VISTA DRIVER FAULT PROCESS NAME lsass exe CURRENT IRQL LAST CONTROL TRANSFER from fffff f f to fffff a d STACK TEXT fffffa f fffff f f a fffffa a cd nt KeBugCheckEx fffffa f fffff d dbc fffffa aee da fffffa ae nt FNODOBFM string' x d fffffa f d fffff b e fffffa f a nt MiSectionCreated x fffffa f fffff dc fffffa f b fffffa f b nt MmCreateSection x e fffffa f b fffff a f fffffa ade bb f be b nt NtCreateSection x f fffffa f bb f ba nt KiSystemServiceCopyEnd x be x f ba STACK COMMAND kb FOLLOWUP IP nt FNODOBFM string' d fffff f f cc int SYMBOL STACK INDEX SYMBOL NAME nt FNODOBFM string' d FOLLOWUP NAME MachineOwner MODULE NAME nt IMAGE BSOD Memory Management NAME BSOD Memory Management ntkrnlmp exe DEBUG FLR IMAGE TIMESTAMP c e ae FAILURE BUCKET ID X x a nt FNODOBFM string d BUCKET ID X x a nt BSOD Memory Management FNODOBFM string d Followup MachineOwner --------- I would appreciate any help with this hopefully I won't get the BSOD again Thanks

A:BSOD Memory Management

STOP 0x0000001A: MEMORY_MANAGEMENT Usual causes: Device driver, memory, kernel




Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.

Loading Dump File [C:\Users\richc46\AppData\Local\Temp\Temp1_Server%20Posting[1].zip\Server Posting\Windows_NT6_BSOD_jcgriff2\Mini011011-02.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows Server 2008/Windows Vista Kernel Version 6002 (Service Pack 2) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 6002.18267.amd64fre.vistasp2_gdr.100608-0458
Machine Name:
Kernel base = 0xfffff800`03049000 PsLoadedModuleList = 0xfffff800`0320ddd0
Debug session time: Mon Jan 10 19:29:16.272 2011 (GMT-5)
System Uptime: 0 days 0:00:35.975
Loading Kernel Symbols
...............................................................
................................................................
...............
Loading User Symbols
Loading unloaded module list
........
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 1A, {61940, fffffa800a6cd000, 0, 0}
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+282d )
Followup: MachineOwner
---------
2: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
MEMORY_MANAGEMENT (1a)
# Any other values for parameter 1 must be individually examined.
Arguments:
Arg1: 0000000000061940, A PDE has been unexpectedly invalidated.
Arg2: fffffa800a6cd000
Arg3: 0000000000000000
Arg4: 0000000000000000
Debugging Details:
------------------

BUGCHECK_STR: 0x1a_61940
CUSTOMER_CRASH_COUNT: 2
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: lsass.exe
CURRENT_IRQL: 2
LAST_CONTROL_TRANSFER: from fffff800030f579f to fffff800030a34d0
STACK_TEXT:
fffffa60`056f6888 fffff800`030f579f : 00000000`0000001a 00000000`00061940 fffffa80`0a6cd000 00000000`00000000 : nt!KeBugCheckEx
fffffa60`056f6890 fffff800`030d3dbc : fffffa80`0aee0da0 00000000`00000158 fffffa80`0ae86490 00000000`00000001 : nt! ?? ::FNODOBFM::`string'+0x282d
fffffa60`056f68d0 fffff800`03308b9e : 00000000`00000002 00000000`01000000 00000000`00000000 fffffa60`056f69a0 : nt!MiSectionCreated+0x154
fffffa60`056f6920 fffff800`032dc194 : fffffa60`056f6b70 00000000`00000000 00000000`00000000 fffffa60`056f6b68 : nt!MmCreateSection+0x61e
fffffa60`056f6b20 fffff800`030a2f73 : fffffa80`0ade5bb0 00000000`0000000f 00000000`001be2b8 00000000`00000000 : nt!NtCreateSection+0x15f
fffffa60`056f6bb0 00000000`776f71ba : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
00000000`001be298 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x776f71ba

STACK_COMMAND: kb
FOLLOWUP_IP:
nt! ?? ::FNODOBFM::`string'+282d
fffff800`030f579f cc int 3
SYMBOL_STACK_INDEX: 1
SYMBOL_NAME: nt! ?? ::FNODOBFM::`string'+282d
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: nt
IMAGE_NAME: ntkrnlmp.exe
DEBUG_FLR_IMAGE_TIMESTAMP: 4c0e5ae3
FAILURE_BUCKET_ID: X64_0x1a_61940_nt!_??_::FNODOBFM::_string_+282d
BUCKET_ID: X64_0x1a_61940_nt!_?... Read more

http://www.vistax64.com/crashes-debugging/286783-bsod-memory-management.html
Relevancy 64.93%

HI all,

I've been running my laptop for about a year without any problems unit as of late, before it started to crash randomly every now and then, showing my BSOD. The BSOD is different everytime, but mostly is of 'IRQ not lesss than or equal', or 'memory management'. Another thing is that the computer crashes on when it boots up, or when i move from one place to another.

My computer's specs are:
Windows Visa Home Premium,
Intel Core 2 Duo CPU P9500 2.53ghz
3gig ram ddr2
mobile intel 4 series chipset family (GMA 4500mhd)
 

https://forums.techguy.org/threads/bsod-memory-management.943428/
Relevancy 64.93%

My computer's been running BSOD x2 Management Memory well for at least a couple Memory Management BSOD x2 years now but ever since I played a particular game a week or so ago probably not the issue but it's State of Decay known to overheat some peoples computers all my games have been crashing and now I've had BSODs in two separate games State of Decay began crashing sometimes requiring me to restart my computer to get the game running again due to an engine memory writing error of some sort I found things in the background were crashing while I played like Firefox and OpenOffice that I had running while playing Then the game BSOD'd me MEMORY MANAGEMENT Parameter x I played other games They too started crashing Warframe and now Planetside which crashed once the day before yesterday then times Memory Management BSOD x2 today That game crashes often but then this morning it BSODs me as well Memory management x Since that last BSOD my antivirus software won't start due to an error in one of its files probably due to the crash since it was functioning properly up until then It seems to run well with no errors when I'm not doing strenuous things like playing games I've run passes of windows memory checker on standard no issues Trying memtest next Zip file attached please advise

A:Memory Management BSOD x2

Hi DrSNAFU.

There is a hint that Kaspersky is failing.

Code:
fffff880`033fcf18 fffff880`04481d33Unable to load image \SystemRoot\system32\DRIVERS\klif.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for klif.sys
*** ERROR: Module load completed but symbols could not be loaded for klif.sys
klif+0x75d33
Description here: Driver Reference Table - klif.sys

Uninstall Kaspersky using Kaspersky Removal Tool. At least as a test. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.
Download, install and update those, and then run full system scans with both of them, one by one.

Let us know the results.
_____________________________________________________________________________________

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1A, {3452, 12f4a000, fffff700011f9530, 53100000910d0424}

Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+35163 )

Followup: MachineOwner
---------

http://www.sevenforums.com/bsod-help-support/311993-memory-management-bsod-x2.html
Relevancy 64.93%

? OS -Windows 7 ?
? x64 ?
? What was original installed OS on system? Same
? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)? Full retail version Ultimate
? Age of system (hardware) 9 months
? Age of OS installation 9 months

? CPU - i7 2600k
? Video Card MSI N460GTX Hawk GeForce GTX 460 (Fermi)
? MotherBoard Gigabyte GA-Z68XP-UD3
? Power Supply - Corsair HX Professional Series 750-Watt

Can't Seem to find a rhyme or reason to why it blue screens, happens from 1/wk to 1/month. I am personally leaning towards the Intel 311 Series Larsen Creek 20GB 2.5" SATA II SLC SSD, seems like my probably started not too long after that was installed.

A:Memory Management BSOD

"This is a kernel internal error. The most common reason to see this
bugcheck is when a filesystem or a driver has a mismatched number of
calls to disable and re-enable APCs. The key data item is the
Thread->CombinedApcDisable field. This consists of two separate 16-bit
fields, the SpecialApcDisable and the KernelApcDisable. A negative value
of either indicates that a driver has disabled special or normal APCs
(respectively) without re-enabling them; a positive value indicates that
a driver has enabled special or normal APCs (respectively) too many times."
The other two were corrupt and would not open, error return:
"The Parameter was Incorrect"

http://www.techsupportforum.com/forums/f299/memory-management-bsod-643868.html
Relevancy 64.93%

I have recently upgraded my Mobo, CPU and RAM. However it BSOD's with memory_management as the error. What can I do to try and diagnose the issue?

Thanks

Marcus

A:Memory Management BSOD

Your crash dumps are not showing any probable finite reason.

Free up the startup. Windows does not need any other program to auto start with it, but the auto start programs often conflicts and causes various problems including BSODs.
Click on the Start button
Type ?msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the ?Startup? tab.
Deselect all items other than the antivirus.
Apply > OK
Accept then restart.
Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

Are you overclocking? As you are getting BSODs, you should stop overclocking and run all the hardware components like CPU, GPU and RAM to their default settings. Also set the BIOS to default, too.
How To Clear CMOS (Reset BIOS)

Is the computer hot? Report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy.

If those tests comes good, enable Driver Verifier to monitor the drivers.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.



   Information
Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.



   Warning
Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.



   Tip

If you fail to get on the Desktop because of DV, Boot into Advanced Boot Options > Safe mode. Disable DV there. Now boot normally again, and try following the instruction of enabling DV again.
If you cannot boot in Safe mode too, do a System Restore to a point you made earlier.

Let us know the results, with the subsequent crash dumps, if any. Post it following the Blue Screen of Death (BSOD) Posting Instructions.

Also let us know how old the build is.
_____________________________________________________________________________
BSOD ANALYSIS:

Code:
BugCheck 1A, {41287, c3, 0, 0}

Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+454f5 )

Followup: MachineOwner
-----------------------------------------------------------------------------------------
BugCheck 1A, {41287, 4b000006, 0, 0}

Probably caused by : hardware ( nt! ?? ::FNODOBFM::`string'+454f5 )

Followup: MachineOwner
---------

http://www.sevenforums.com/bsod-help-support/291260-memory-management-bsod.html
Relevancy 64.93%

Hey TSF!

I upgraded my RAM somewhat recently, and since I have put my new RAM in, I have been having bluescreen errors.

While I play games such as WoW, Star Wars, League of Legends.. etc. Occasionally the games do not render properly, I do have pictures if this would help. I am just stumped on what could be the problem.

OS: Windows 7
64 Bit
Windows 7, full retail
Around 2 years old now
OS was reinstalled approx. 2 weeks ago, as I reformatted.

CPU: AMD Phenom II x4 B55 @ 3.2GHz (3 CPU)
Video Card: VisionTEK Radeon HD 6850
MoBo: M4a79XTD Evo, by ASUS
Powersupply: OCZ ModXStream 700W

Attached is the needed files from the jcgriff.

A:BSOD Memory Management

Well sounds like it could be down to your RAM test it with memtest the USB one is probably the quickest + easiest. Just install onto a clean usb, restart your comp, then from bios go to boot options and select your usb stick as what you want to boot from.

http://www.techsupportforum.com/forums/f299/bsod-memory-management-643724.html
Relevancy 64.93%

I know that there are a lot of thread about the memory management BSOD but I haven t come across anything that has Memory Management BSOD been useful for my problem Basically my computer BSOD normally about once a day today it BSOD times but usually it s not more than once The problem it gives me is memory management although sometimes I have found it reports to me quot IRQL NOT LESS OR EQUAL quot please bear in mind I have no idea what this actually means Although as I said it s usually a memory management problem I have also found that Memory Management BSOD this BSOD never happens Memory Management BSOD when I m running a Memory Management BSOD program E g when playing games that I would expect to use a lot of memory processor etc it has NEVER BSOD but like I said it BSOD at least once a day usually when it s just sitting on the desktop and I m not doing anything or i m just typing a document on internet forums etc So far I have reseated my memory and video card and checked for overheating As far as i can tell there are no errors but if anybody knows of any software I could use to check this it would be helpful Instead of me posting a lot of information about my computer the problem as I know little about the actual running of a computer I figured it would be best if you could tell me what information you need and how to get it and then I will provide you with it because otherwise I think you ll just be sifting through information that you don t need Packard Bell Windows Vista Home Premium Service Pack Intel Core Quad CPU Q GHz GB ram Nvidia GForce GS That s my basic computer please let me know if you need more information nbsp

A:Memory Management BSOD

*Bumped* because I really need assistance with this! Thanks
EDIT: Plus: I had another blue screen today: this time saying "APC_INDEX_MISMATCH" any ideas?
 

https://forums.techguy.org/threads/memory-management-bsod.938493/
Relevancy 64.93%

Last night right before I got off my computer after many hours of use I received a BSOD that was titled quot Memory Management quot this BSOD wasn't like my others which usually BSOD then after I log back in BSOD again until I completely power the system down then turn it back Memory New Management? BSOD on New BSOD Memory Management? this was a single BSOD I updated my system specs to shed some light on what is in my PC perhaps it will help some Attached are the BSODs I have had from the th until last night the BSOD is always different and they all happened at various times and during different situations The graphics card I have is brand new because I was having an issue with NVIDIA drivers and the windows installation and graphics New BSOD Memory Management? card drivers are both brand new graphics card was done using GURU D driver sweeper Any help would be extremely appreciated I have run memtest on this memory in the past with passes no failures or faults any ideas

A:New BSOD Memory Management?

  
Quote: Originally Posted by Twister1089


Last night right before I got off my computer after many hours of use I received a BSOD that was titled "Memory Management" this BSOD wasn't like my others which usually BSOD then after I log back in BSOD again until I completely power the system down then turn it back on, this was a single BSOD. I updated my system specs to shed some light on what is in my PC, perhaps it will help some. Attached are the 5 BSODs I have had from the 15th until last night, the BSOD is always different and they all happened at various times and during different situations. The graphics card I have is brand new because I was having an issue with NVIDIA drivers and the windows installation and graphics card drivers are both brand new (graphics card was done using GURU 3D driver sweeper). Any help would be extremely appreciated, I have run memtest on this memory in the past with 8 passes no failures or faults, any ideas?


You have 5 different bugchecks (1e,d1,124,3b,1a)

the 124 is particularly telling. When you have that many different crash types it is usually hardware driven.

Please read here to see what it means and what to try. Your .dmp file shows a stop error of 0x124 which is a general hardware error .. A "stop 0x124" is fundamentally different to many other types of bluescreens because it stems from a hardware complaint. Stop 0x124 minidumps contain very little practical information, and it is therefore necessary to approach the problem as a case of hardware in an unknown state of distress. You can read more on this error and what to try here... Stop 0x124 - what it means and what to try

Thanks
Ken

http://www.sevenforums.com/bsod-help-support/145842-new-bsod-memory-management.html
Relevancy 64.93%

Hello,

After previously solving the BSOD error "a clock interrupt was not received on a secondary processor within the allocated time interval" by replacing the CPU, I have run into another BSOD. This time the error is "memory management".

After doing some research I'm thinking this error is about some program conflicts or something similar (I'm hoping that is the case!), instead of a hardware problem.

I have attached the last 3 minidumps I have.

Any help would much appreciated.

Cheers,
Daniel
 

Relevancy 64.93%

I have been experiencing several blue screen of death regarding memory management. What should I do?

Does restoring abck to default helps?

I'm using Laptop Windows 7, HP.
 

Relevancy 64.93%

Hello guys recently my computing experience was put on a sudden stop with a Memory Management BSOD which happened twice during idling and some resource heavy task such as gaming here s my HijackThis log Logfile of Trend Micro BSOD Memory Management HijackThis v Scan saved at PM on Platform Windows Vista SP WinNT MSIE Internet Explorer v Boot mode Normal Running processes C Windows system Dwm exe C Windows Explorer EXE C Windows system taskeng exe C Program Files Adobe Reader Reader reader sl exe C Program Files Common Files Nokia MPlatform NokiaMServer exe C Program Files Alwil Software Avast AvastUI exe C Program Files Common Files Java Java Update jusched exe C Program Files BitTorrent bittorrent exe C Windows ehome ehtray exe C Windows system wbem unsecapp exe C Windows ehome ehmsas exe C Program Files Yahoo Messenger ymsgr tray exe C Users jordan AppData Local Google Update GoogleCrashHandler exe C Users jordan AppData Local Google Chrome Application chrome exe C Users jordan AppData Local Google Chrome Application chrome exe C Windows system rundll exe C Users jordan AppData Local Google Chrome Application chrome exe C Program Files Trend Memory Management BSOD Micro HijackThis HijackThis exe C Windows system wuauclt exe C Windows system SearchFilterHost exe C Windows system taskmgr exe R - HKCU Software Microsoft Internet Explorer Main Search Page http go microsoft com fwlink LinkId R - HKCU Software Microsoft Internet Explorer Main Start Page about blank R - HKLM Software Microsoft Internet Explorer Main Default Page URL http www yahoo com R - HKLM Software Microsoft Internet Explorer Main Default Search URL http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Main Search Page http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Main Start Page http www yahoo com R - HKLM Software Microsoft Internet Explorer Search SearchAssistant R - HKLM Software Microsoft Internet Explorer Search CustomizeSearch R - HKCU Software Microsoft Windows CurrentVersion Internet Settings ProxyOverride local R - HKCU Software Microsoft Internet Explorer Toolbar LinksFolderName R - URLSearchHook Yahoo Toolbar - EF BD -C FB- D - F- D F - C Program Files Yahoo Companion Installs cpn yt dll R - URLSearchHook Veoh Web Player Toolbar - cd bf - f - ef- d-bb bd e - C Program Files Veoh Web Player tbVeoh dll R - URLSearchHook BitTorrentBar Toolbar - c f aa-f f- c- f e-b d a - C Program Files BitTorrentBar tbBit dll O - Hosts localhost O - BHO btorbit com - B - B - -B F -F B EFC - C Program Files Orbitdownloader orbitcth dll O - BHO amp Yahoo Toolbar Helper - D -C F - efb- B - ECA - C Program Files Yahoo Companion Installs cpn yt dll O - BHO AcroIEHelperStub - DF C-E AD- -A -FA C EBDC - C Program Files Common Files Adobe Acrobat ActiveX AcroIEHelperShim dll O - BHO Conduit Engine - F B -B - - B- FBA BD D - C Program Files ConduitEngine ConduitEngin dll O - BHO WormRadar com IESiteBlocker NavFilter - CA F - F E- B -A E- E E C C - no file O - BHO Spybot-S amp D IE Protection - - F - D - - D F - C PROGRA SPYBOT SDHelper dll O - BHO BitTorrentBar Toolbar - c f aa-f f- c- f e-b d a - C Program Files BitTorrentBar tbBit dll O - BHO URLRedirectionBHO - B F A - E - -BA - B E FF - C PROGRA MICROS Office URLREDIR DLL O - BHO Veoh Web Player Toolbar - cd bf - f - ef- d-bb bd e - C Program Files Veoh Web Player tbVeoh dll O - BHO Java tm Plug-In SSV Helper - DBC -A - b-BC - C C C A - C Program Files Java jre bin jp ssv dll O - BHO SingleInstance Class - FDAD DA - A - FD - C - F AC - C Program Files Yahoo Companion Installs cpn YTSingleInstance dll O - Toolbar Yahoo Toolbar - EF BD -C FB- D - F- D F - C Program Files Yahoo Companion Installs cpn yt dll O - Toolbar Veoh Video Compass - EB - A- B - A - F D DAE - C Program Files Veoh Networks Veoh Video Compass SearchRecsPlugin dll O - Toolbar Veoh Web Player Toolbar - cd bf - f - ef- d-bb bd e - C Program Files Veoh Web Player tbVeoh dll O - Toolbar BitTorrent... Read more

https://forums.techguy.org/threads/memory-management-bsod.1015604/
Relevancy 64.93%

I started getting this 20 minutes ago removed 3 ram cards and actually lets me load google chrome before crashing to bsod and telling me BSOD Memory Management

A:BSOD Memory management

Crashes may be due to your display card, its drivers, Windows corruption, Memory, hard disk problems, or other hardware. Memory is most likely. Could be a driver issue. For more help:http://www.techsupportforum.com/foru...ta-452654.html

DRIVER VERIFIER - Windows 8, 7 & Vista

http://www.techsupportforum.com/forums/f299/bsod-memory-management-681635.html
Relevancy 64.93%

Hi all I have an HTPC that is having BSOD more often that I'd like to see The PC sleeps while not recording or playing any media and wakes up automatically when a TV BSOD Management Memory show is due to BSOD Memory Management be recorded or using the remote control The two most common applications I use are WMC and XBMC The problem occurs usually at some point after waking up it usually happens by no apparent reason other times it seems to becaused by switching inputs on the external AVR the one the PC is connected to through HDMI Sometimes it could even survive three sleep wake up cycles but eventually the blue screen will appear if I don't do a hard reset often daily Please see the attached images and report for the crash Any idea what could be causing this annoying problem Specs below Any help is much appreciated Thanks Jav Hardware is months old OS has not been reinstalled Windows Ultimate x retail Core i GHz MB Gigabyte GA-H M-UD H GB Ram Intel HD Graphics Core i Realtek High Definition Audio Display AVR Pioneer BSOD Memory Management VSXLX connected to PC through hdmi cable Resolution x HDD WD green TB

A:BSOD Memory Management

  
Quote: Originally Posted by javich


Hi all,

I have an HTPC that is having BSOD more often that I'd like to see.

The PC sleeps while not recording or playing any media and wakes up automatically when a TV show is due to be recorded or using the remote control.

The two most common applications I use are WMC and XBMC 10.1

The problem occurs usually at some point after waking up, it usually happens by no apparent reason, other times it seems to becaused by switching inputs on the external AVR (the one the PC is connected to through HDMI). Sometimes it could even survive three sleep/wake up cycles but eventually the blue screen will appear if I don't do a hard reset often (daily).

Please see the attached images and report for the crash.

Any idea what could be causing this annoying problem?

Specs below.

Any help is much appreciated.

Thanks,
Jav.

Hardware is 10 months old
OS has not been reinstalled.
Windows 7 Ultimate x64 retail
Core i3 53 @ 2.93GHz
MB: Gigabyte GA-H55M-UD2H
4GB Ram
Intel HD Graphics (Core i3)
Realtek High Definition Audio
Display/AVR Pioneer VSXLX70 connected to PC through hdmi cable
Resolution 1980x1080
HDD: WD green 2TB



No DMP files included in upload try this method.


To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:

* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.

To ensure minidumps are enabled:

Go to Start, in the Search Box type: sysdm.cpl, press Enter.
Under the Advanced tab, click on the Startup and Recovery Settings... button.
Ensure that Automatically restart is unchecked.
Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
OK your way out.
Reboot if changes have been made.

http://www.sevenforums.com/bsod-help-support/173273-bsod-memory-management.html
Relevancy 64.93%

I'm getting Memory management error all the time (1-5 times a day). But my ram is fine, it passed 20 runs in Memtest86+ and windows own test. I even change my HDD last week and no change. And for some reason windows don't save dump files. I have done a clean install and still the same crap. I have change, motherbord(same series), power supply, HDD(3 in total), RAM, grafik card 3 times. still the same shit. I have trying to solve this since september 09.

Now I can here a crack sound sometimes (this is a new syntom) and it returns regulary when it starts (about 3-5min between). The only DUMP file I have blame HDAudio.sys. I have updated my audio drivers, still the same.

specs:

Asus P7P55D
Intel i5 750 @ 2.6ghz
8gb Corsair Dominator GT DDR3 1600MHz 4GB CMG4GX3M2A1600C7
two Ati 5850
intel 80gb SSD
Western Digital 1Tb

A:BSOD, Memory management

  
Quote: Originally Posted by implor


I'm getting Memory management error all the time (1-5 times a day). But my ram is fine, it passed 20 runs in Memtest86+ and windows own test. I even change my HDD last week and no change. And for some reason windows don't save dump files. I have done a clean install and still the same crap. I have change, motherbord(same series), power supply, HDD(3 in total), RAM, grafik card 3 times. still the same shit. I have trying to solve this since september 09.

Now I can here a crack sound sometimes (this is a new syntom) and it returns regulary when it starts (about 3-5min between). The only DUMP file I have blame HDAudio.sys. I have updated my audio drivers, still the same.

specs:

Asus P7P55D
Intel i5 750 @ 2.6ghz
8gb Corsair Dominator GT DDR3 1600MHz 4GB CMG4GX3M2A1600C7
two Ati 5850
intel 80gb SSD
Western Digital 1Tb



Did you test each stick individually? test each mobo slot by itself?

Ken

http://www.sevenforums.com/bsod-help-support/85418-bsod-memory-management.html
Relevancy 64.93%

Hello I downloaded MEMTEST but it took too long to complete like - hour or so so i had to interrupt it coz i tought its stuck The thing is i ran BSOD Management Memory XP windows and i was trying to patch my WOW game with new patch but get a BSOD Memory Management thingy Then i tought BSOD Memory Management its the OS so i made a new partition and installed the Windows on other partition so i run my computer atm as multiboot OS s When i start some program like Windows Manager or updating Windows i managed to update it full i get BSOD I dont know what is the problem Main questions Is it possible my RAM do all of this pls take a look at attached Minidumps Is it possible MEMTEST to run for hour on GB RAM without stuck ofc If its not RAM what could possible be and how to fix this pls its like year or so i am living with this problem i need solution Thank you very much I will visit the forum regularly if i need to give you some more info nbsp

Relevancy 64.93%

perfmon.zip

Windows_NT6_BSOD_jcgriff2.zip

suddenly happen at desktop

A:memory management bsod

Are you using a USB mouse and keyboard? If so, it's safe to ignore the PS2 mouse and keyboard errors.

Is the D: drive your recovery drive? If so, it's safe to ignore the lack of free space on it.

Please install Service Pack 2: Learn how to install Windows Vista Service Pack 2 (SP2)

The 3 April memory dumps show:
- issues with Kaspersky
- issues with wireless network drivers/Daemon Tools or Alcohol % software

Uninstall Kaspersky. Download a fresh copy and install that.

Download fresh wireless drivers from the support site for the PC and install that.

Looks like you have Daemon Tools/Alcohol % software installed. Please do the following:





Daemon Tools (and Alcohol % software) are known to cause BSOD's on some Win7 systems (mostly due to the sptd.sys driver, although I have seen dtsoftbus01.sys blamed on several occasions).
Please uninstall the program, then use the following free tool to ensure that the troublesome sptd.sys driver is removed from your system (pick the 32 or 64 bit system depending on your system's configuration): http://www.duplexsecure.com/faq#remove_32sptd

Some free alternatives (I don't use them, so I can't comment on them)
http://www.kernsafe.com/product/totalmounter.aspx
http://www.magiciso.com/



Further info on BSOD error messages available at: http://www.carrona.org/bsodindx.html

The following info is just FYI, I've already addressed the issues that I saw in the above paragraphs
3RD PARTY DRIVERS PRESENT IN THE DUMP FILES

Code:

spsb.sys Wed Mar 05 19:32:57 2008 (47CF3BB9)
UBHelper.sys Wed Jan 30 20:30:26 2008 (47A124B2)
psdfilter.sys Mon Feb 18 08:49:54 2008 (47B98D02)
kl1.sys Wed Jun 09 09:24:39 2010 (4C0F9617)
AtiPcie.sys Mon Oct 30 14:23:10 2006 (4546430E)
ahcix86s.sys Fri Mar 07 08:15:58 2008 (47D1400E)
atikmdag.sys Sat Aug 30 01:12:57 2008 (48B8D6D9)
yk60x86.sys Thu Dec 06 07:25:16 2007 (4757EA2C)
NTIDrvr.sys Wed Jan 30 20:30:42 2008 (47A124C2)
RTKVHDA.sys Tue May 20 05:58:56 2008 (4832A0E0)
klif.sys Fri Aug 06 13:16:02 2010 (4C5C4352)
kl2.sys Wed Jun 09 09:24:35 2010 (4C0F9613)
SASKUTIL.SYS Tue Jul 12 16:24:48 2011 (4E1CAD90)
klmouflt.sys Mon Nov 02 11:26:08 2009 (4AEF0820)
athrusb.sys Tue Jul 29 08:45:18 2008 (488F10DE)
klim6.sys Thu Apr 22 11:07:20 2010 (4BD06628)
SASDIFSV.SYS Thu Jul 21 19:03:16 2011 (4E28B034)
int15.sys Tue Sep 30 17:50:14 2008 (48E29F16)
PSDNServ.sys Mon Feb 18 08:50:35 2008 (47B98D2B)
PSDVdisk.sys Mon Feb 18 08:50:56 2008 (47B98D40)
SSPORT.sys Tue Nov 21 23:41:42 2006 (4563D506)
spya.sys Wed Mar 05 19:32:57 2008 (47CF3BB9)
spqv.sys Wed Mar 05 19:32:57 2008 (47CF3BB9)

http://www.carrona.org/drivers/driver.php?id=UBHelper.sys
http://www.carrona.org/drivers/driver.php?id=psdfilter.sys
http://www.carrona.org/drivers/driver.php?id=kl1.sys
http://www.carrona.org/drivers/driver.php?id=AtiPcie.sys
http://www.carrona.org/drivers/driver.php?id=ahcix86s.sys
http://www.carrona.org/drivers/driver.php?id=atikmdag.sys
http://www.carrona.org/drivers/driver.php?id=yk60x86.sys
http://www.carrona.org/drivers/driver.php?id=NTIDrvr.sys
http://www.carrona.org/drivers/driver.php?id=RTKVHDA.sys
http://www.carrona.org/drivers/driver.php?id=klif.sys
http://www.carrona.org/drivers/driver.php?id=kl2.sys
http://www.carrona.org/drivers/driver.php?id=SASKUTIL.SYS
http://www.carrona.org/drivers/driver.php?id=klmouflt.sys
http://www.carrona.org/drivers/driver.php?id=athrusb.sys
http://www.carrona.org/drivers/driver.php?id=klim6.sys
http://www.carrona.org/drivers/driver.php?id=SASDIFSV.SYS
http://www.carrona.org/drivers/driver.php?id=PSDNServ.sys
http://www.carrona.org/drivers/driver.php?id=PSDVdisk.sys
http://www.carrona.org/drivers/driver.php?id=SSPORT.sys

BSOD BUGCHECK SUMMARY

Code:

Loading Dump File [C:\Users\FUBAR\_jcgriff2_\dbug\__Kernel__\Mini041612-01.dmp]
Built by: 6001.18538.x86fre.vistasp1_gdr.101014-0432
Debug session time: Mon Apr 16... Read more

http://www.vistax64.com/crashes-debugging/295883-memory-management-bsod.html
Relevancy 64.93%

Hallo, I'm on my bosses computer right now, and he got a bsod saying 'memory management'. I have a few files attached, any help is appreciated. Thanks. ^_^

A few q & a...
- x86 (32-bit) or x64 ? x64
- the original installed OS on the system? yes
- an OEM or full retail version? oem
- OEM = came pre-installed on system
- Full Retail = you purchased it from retailer

- What is the age of system (hardware)? 3 Years.
- What is the age of OS installation (have you re-installed the OS?) Since new, 2009.

A:Memory Management BSOD

The memory dump blames Norton. Please do this:





Anti-Virus Removal:
Please do the following:
- download a free antivirus for testing purposes: Free AntiVirus
- uninstall the Norton from your system (you can reinstall it, if so desired, when we're done troubleshooting)
- remove any remnants of Norton using this free tool: http://us.norton.com/support/kb/web_...080710133834EN
- IMMEDIATELY install and update the free antivirus, then check to ensure that the Windows Firewall is turned on.
- check to see if this fixes the BSOD's
NOTE: NEVER run more than 1 anti-virus, firewall, Internet Security/Security Center application at the same time.



If the above steps don't stop the BSOD's, please zip up and upload any new memory dumps with your next post - and we'll see what we can figure out from there.

The following info is just FYI, I've already addressed the issues that I saw in the above paragraphs

- Further info on BSOD error messages available at: http://www.carrona.org/bsodindx.html
- Info on how to troubleshoot BSOD's (DRAFT): http://www.carrona.org/userbsod.html
- How I do it: http://www.carrona.org/howidoit.html

3RD PARTY DRIVERS PRESENT IN THE DUMP FILES

Code:

BHDrvx64.sys Wed May 16 22:16:36 2012 (4FB45F84)
CamDrL64.sys Sat Feb 03 13:17:27 2007 (45C4D1B7)
ENG64.SYS Wed Apr 25 05:29:25 2012 (4F97C3F5)
EX64.SYS Wed Apr 25 05:27:28 2012 (4F97C380)
EraserUtilRebootDrv.sys Tue May 15 20:36:03 2012 (4FB2F673)
GEARAspiWDM.sys Mon May 18 08:17:04 2009 (4A1151C0)
IDSvia64.sys Thu May 24 20:08:33 2012 (4FBECD81)
Ironx64.SYS Mon Nov 14 21:00:53 2011 (4EC1C7D5)
LVMVDrv.sys Fri Jul 20 03:18:17 2007 (46A061B9)
LVPr2M64.sys Wed Jul 18 20:21:21 2007 (469EAE81)
PS2.sys Thu Sep 07 18:49:03 2006 (4500A1DF)
RTKVHD64.sys Thu Jul 03 04:56:41 2008 (486C9449)
SRTSP64.SYS Thu Mar 15 14:09:13 2012 (4F623049)
SRTSPX64.SYS Thu Mar 15 14:09:21 2012 (4F623051)
SYMDS64.SYS Mon May 16 18:15:03 2011 (4DD1A1E7)
SYMEFA64.SYS Tue Nov 22 19:49:28 2011 (4ECC4318)
SYMEVENT64x86.SYS Mon Jan 23 13:57:54 2012 (4F1DADB2)
SYMTDIV.SYS Sat Nov 12 16:08:01 2011 (4EBEE031)
ccSetx64.sys Fri Nov 04 18:05:25 2011 (4EB461A5)
dump_nvstor64.sys Fri Jun 06 22:08:11 2008 (4849ED8B)
eeCtrl64.sys Tue May 15 20:36:03 2012 (4FB2F673)
nvlddmkm.sys Thu May 22 19:17:52 2008 (4835FF20)
nvmfdx64.sys Wed May 21 13:48:06 2008 (48346056)
nvraid.sys Wed Jun 06 16:34:01 2007 (46671A39)
nvstor64.sys Fri Jun 06 22:08:11 2008 (4849ED8B)
pnarp.sys Tue Oct 28 01:57:00 2008 (4906A9AC)
processr.sys Sat Jan 19 00:52:45 2008 (4791902D)
purendis.sys Tue Oct 28 00:31:28 2008 (490695A0)

http://www.carrona.org/drivers/driver.php?id=BHDrvx64.sys
http://www.carrona.org/drivers/driver.php?id=CamDrL64.sys
http://www.carrona.org/drivers/driver.php?id=ENG64.SYS
http://www.carrona.org/drivers/driver.php?id=EX64.SYS
http://www.carrona.org/drivers/driver.php?id=EraserUtilRebootDrv.sys
http://www.carrona.org/drivers/driver.php?id=GEARAspiWDM.sys
http://www.carrona.org/drivers/driver.php?id=IDSvia64.sys
http://www.carrona.org/drivers/driver.php?id=Ironx64.SYS
http://www.carrona.org/drivers/driver.php?id=LVMVDrv.sys
http://www.carrona.org/drivers/driver.php?id=LVPr2M64.sys
http://www.carrona.org/drivers/driver.php?id=PS2.sys
http://www.carrona.org/drivers/driver.php?id=RTKVHD64.sys
http://www.carrona.org/drivers/driver.php?id=SRTSP64.SYS
http://www.carrona.org/drivers/driver.php?id=SRTSPX64.SYS
http://www.carrona.org/drivers/driver.php?id=SYMDS64.SYS
http://www.carrona.org/drivers/driver.php?id=SYMEFA64.SYS
http://www.carrona.org/drivers/driver.php?id=SYMEVENT64x86.SYS
http://www.carrona.org/drivers/driver.php?id=SYMTDIV.SYS
http://www.carrona.org/drivers/driver.php?... Read more

http://www.vistax64.com/crashes-debugging/297043-memory-management-bsod.html
Relevancy 64.93%

Been getting this weird bluescreen just in the last few days, I don't think it's ram because I've ran memtest and 0 errors

http://www.sevenforums.com/bsod-help-support/394742-bsod-memory-management.html
Relevancy 64.93%

Hi

i have recently fixed a BSOD problem *thanks to people on this forum :)*

but just then i had a memory management BSOD, i dont think its a major problem, only had 2 of thoes recently. it happened after i closed Left for dead 2, like about 3 seconds after i closed the game.

as wikipedia said BSOD usually relates to hardware problems and shouldnt really be ignored, so i decided to bother you guys again. *sorry*

i have attached the mini dump file. any insight to what has happened and how to fix this problem is much appreciated =)

Regards.
Peter

A:Memory Management BSOD

MSINFO32 reports:
20 STOP 0x124
8 STOP 0x1A

This is most likely a hardware problem, although it can be a compatibility issue, a Windows problem, or a corrupted driver (the last one isn't agreed upon by all analysts).

Garena is known to have some issues with some Win7 systems. Please uninstall it until we're finished troubleshooting.

You have the infamous 2005 version of ASACPI.sys installed. This is a known BSOD cause and you must update it at the Asus Support website ( http://support.asus.com/download/dow...Language=en-us )

Locate the downloads for your system/mobo and 64 bit Win7. You are looking for the ATK0110 ACPI Utility driver. It's either under the Utility section or the ATK section.

I suggest starting all troubleshooting with the following diagnostic tests. They'll save you a lot of time and heartache if there is a hardware failure, and you'll have the disks on hand in case you need them in the future:

Quote:




H/W Diagnostics:
Please start by running these bootable hardware diagnostics:
http://www.carrona.org/memdiag.html (read the details at the link)
http://www.carrona.org/hddiag.html (read the details at the link)

Also, please run one of these free, independent online malware scans to ensure that your current protection hasn't been compromised: http://www.carrona.org/malware.html (read the details at the link)




If this doesn't fix the BSOD's, try the suggestions at this link: http://www.sevenforums.com/crash-loc...-what-try.html

BSOD BUGCHECK SUMMARY

Code:

Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Tue Oct 26 08:08:18.095 2010 (UTC - 4:00)
System Uptime: 0 days 6:35:40.796
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+42ba5 )
BUGCHECK_STR: 0x1a_41287
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: iexplore.exe
Bugcheck code 0000001A
Arguments 00000000`00041287 00000000`00000030 00000000`00000000 00000000`00000000
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Fri Oct 22 20:51:46.109 2010 (UTC - 4:00)
System Uptime: 0 days 0:01:10.810
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+339e3 )
BUGCHECK_STR: 0x1a_3452
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: svchost.exe
Bugcheck code 0000001A
Arguments 00000000`00003452 00000000`7712f000 fffff700`01080eb0 14500000`c74c0004
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Fri Oct 22 07:36:15.240 2010 (UTC - 4:00)
System Uptime: 0 days 0:00:06.942
Probably caused by : hardware
BUGCHECK_STR: 0x124_GenuineIntel
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
Bugcheck code 00000124
Arguments 00000000`00000000 fffffa80`04a8e8f8 00000000`00000000 00000000`00000000
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Fri Oct 22 07:22:28.098 2010 (UTC - 4:00)
System Uptime: 0 days 0:00:08.675
Probably caused by : hardware
BUGCHECK_STR: 0x124_GenuineIntel
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
Bugcheck code 00000124
Arguments 00000000`00000000 fffffa80`04a7a038 00000000`00000000 00000000`00000000
??????????????????????????????????????????????????????????????????????????????????????``

http://www.techsupportforum.com/forums/f299/memory-management-bsod-524336.html
Relevancy 64.93%

Hi, first time poster. I built my computer just about a month ago, I decided to wipe both my hard drives clean and re-install windows 7 64 bit because the driver detecting program I was using (driveragent) was linking me to motherboards of not my model, and I was installing wrong drivers as a result.

I recently received a memory management bsod while browising, and another bsod a few days ago when I fell asleep.

Full retail Windows764bit, hardware is about a month old, and I have reinstalled my OS only once.

060812-5850-01.dmp
060912-8533-01.dmp
windows_nt6_bsod_jcgriff2

these files should be in the zip

Any help would be greatly appreciated.

- Matt

A:Memory Management BSOD

just as i finished posting my last post, I went to windows update and recieved another bsod, this time system service exception. Attached are updated files. Again, any help would be appreciated.

http://www.sevenforums.com/bsod-help-support/234189-memory-management-bsod.html
Relevancy 64.93%

Hey guys, im a bit new to this, but i have read how to post about a BSOD to make things easy

I recently bulit a new computer and i have had a variety of issues, most of which i have fixed (by reading posts on this site ) however these ones i just cant fix....

they are mainly memory management issues that i get when using Firefox, however i attached all the BSOD things just incase there are some more hints in there

I have ran Memtest on all the sticks, with 3 passes and no erros, but i will run it again over night for at least 7 just incase.

Any help would be greatly appriciated as i realy would like to get to the bottom of this..... if there is anything i can do to help aswell let me know

Thanks so much in advance,

Pete

A:BSOD - Memory Management

And now for the attachements,

Cheers

http://www.sevenforums.com/bsod-help-support/56578-bsod-memory-management.html
Relevancy 64.93%

Windows 7
x64
full retail version
6 Months
1 Week, I reinstalled windows.

AMD Athlon II X4 635 Propus 2.9GHz 4 x 512KB L2 Cache Socket AM3 95W Quad-Core Desktop Processor ADX635WFGIBOX

HIS H577FM1GD Radeon HD 5770 1GB 128-bit GDDR5 PCI Express 2.0 x16 HDCP Ready CrossFireX Support Video Card

ASUS M4A785TD-V EVO AM3 AMD 785G HDMI ATX AMD Motherboard

SILVERSTONE ST50F-ES 500W ATX12V v2.3 80 PLUS Certified Active PFC Power Supply


Hi, I'm currently having a very frequently reoccurring BSOD, I've tried reinstalling windows, and running the Memory/HDD checks I've seen suggested on other posts. If you need any more info, or for me to run additionally tests just let me know. Thanks in advance for any help.

A:BSOD, Memory Management ETC

Hi -

Several of the 49 mini kernel memory dumps have bugcheck = 0x24 = NTFS File System and/or mention ntfs.sys itself.

Run hardware diagnostics -

HDD --> http://www.techsupportforum.com/2828431-post7.html

RAM --> http://www.techsupportforum.com/2863029-post5.html


Windbg Logs
--> http://jcgriff2.com/dbug_logs/_99-db..._jcgriff2_.txt
--> http://jcgriff2.com/dbug_logs/_99-db...riff2_.txt.zip

Regards. . .

jcgriff2


`

BSOD BUGCHECK SUMMARY

Code:

Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Sat Sep 18 18:06:43.826 2010 (GMT-4)
System Uptime: 0 days 0:11:13.605
Probably caused by : Ntfs.sys ( Ntfs!NtfsReleaseFcb+54 )
DEFAULT_BUCKET_ID: VERIFIER_ENABLED_VISTA_MINIDUMP
BUGCHECK_STR: 0x3B
PROCESS_NAME: explorer.exe
Bugcheck code 0000003B
Arguments 00000000`c0000005 fffff880`01230454 fffff880`039d2d50 00000000`00000000
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Sat Sep 18 17:54:46.335 2010 (GMT-4)
System Uptime: 0 days 0:07:11.114
Probably caused by : ntkrnlmp.exe ( nt!RtlDispatchException+122 )
DEFAULT_BUCKET_ID: VERIFIER_ENABLED_VISTA_MINIDUMP
BUGCHECK_STR: 0xA
PROCESS_NAME: System
Bugcheck code 0000000A
Arguments fffff800`02b15166 00000000`00000000 00000000`00000000 fffff800`0289ef62
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Sat Sep 18 17:46:49.290 2010 (GMT-4)
System Uptime: 0 days 0:01:09.070
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+460da )
DEFAULT_BUCKET_ID: VERIFIER_ENABLED_VISTA_MINIDUMP
BUGCHECK_STR: 0x1E
PROCESS_NAME: LogonUI.exe
Bugcheck code 0000001E
Arguments ffffffff`c0000005 fffff800`028c500c 00000000`00000000 ffffffff`ffffffff
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Thu Sep 16 01:11:17.840 2010 (GMT-4)
System Uptime: 0 days 0:01:18.588
Probably caused by : Ntfs.sys ( Ntfs!TxfDeleteTxfFo+11 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
BUGCHECK_STR: 0x24
Bugcheck code 00000024
Arguments 00000000`001904fb fffff880`07c14898 fffff880`07c140f0 fffff880`01333dc1
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Thu Sep 16 01:08:58.594 2010 (GMT-4)
System Uptime: 0 days 0:01:00.342
Probably caused by : Ntfs.sys ( Ntfs!NtfsCleanupIrpContext+2db )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: WerFault.exe
BUGCHECK_STR: 0x24
Bugcheck code 00000024
Arguments 00000000`001904fb fffff880`09b37288 fffff880`09b36ae0 fffff880`012328a0
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Thu Sep 16 01:06:57.548 2010 (GMT-4)
System Uptime: 0 days 0:08:11.296
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+2ee83 )
BUGCHECK_STR: 0x7a_c0000005
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: svchost.exe
Bugcheck code 0000007A
Arguments 00000000`00000001 ffffffff`c0000005 fffffa80`06e3ab30 fffff680`00030000
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Thu Sep 16 00:58:13.201 2010 (GMT-4)
System Uptime: 0 days 0:00:51.949
Probably caused by : Ntfs.sys ( Ntfs!NtfsPagingFileIo+155 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x24
PROCESS_NAME: svchost.exe
Bugcheck code 00000024
Arguments 00000000`000c08a2 00000000`00000000 00000000`00000000 00000000`00000000
???????????????????????????????????????????????????????????????????????... Read more

http://www.techsupportforum.com/forums/f299/bsod-memory-management-etc-515096.html
Relevancy 64.93%

Just reformatted my computer and after a couple days I got a BSOD Memory Management.

I attached the minidump if anyone could help me figure out what the problem is

http://www.techsupportforum.com/forums/f299/bsod-memory-management-636550.html
Relevancy 64.93%

Been getting this weird bluescreen just in the last few days, I don't think it's ram because I've ran memtest and 0 errors

http://www.tenforums.com/bsod-crashes-debugging/47492-bsod-memory-management.html
Relevancy 64.93%

I had two BSODs yesterday and I'm at a loss to understand them I've always operated under the theory that one could be a fluke two is a problem The first happened while I was away from the computer I was running Handbrake and was encoding some video files to MP It gave an IRQ LESS THAN type BSOD Later that evening I was trying to transfer some files MEMORY BSOD then MANAGEMENT IRQ to my NAS It was transferring BSOD IRQ then MEMORY MANAGEMENT at a unusually slow rate so I cancled the transfer closed all my programs then tried to restart my system I got a BSOD Memory Management BSOD Up until yesterday I hadn't any problems that I'm aware BSOD IRQ then MEMORY MANAGEMENT of Ran SeaTools for Windows to check SeaGate hard-drive No errors I ran Memtest from bootup CD for hours passes no errors There's only one thing that does concern me First there seems to be a Bluetooth compatibility problem with the Logitech keyboard This keeps coming up But if I download and install the Broadcom bluetooth driver software it disables my Logitech keyboard Then I have uninstall it and use Logitechs Setpoint software anyways System Specs Shuttle SX P E Intel Core Duo E Corsair X - pairs total GB EVGA NVIDIA GeForce GTS LG Black X BD-R X BD-RE X DVD R X DVD-RAM X BD-ROM MB Cache SATA Super Multi WH LS Seagate ST AS GB RPM MB Cache SATA Gb s quot Internal Hard Drive Primary Western Digital Caviar SE GB RPM MB Cache SATA Second drive Logitech Bluetooth MX keyboard Mouse Combo Dell monitor Onboard audio using Realtec codecs Windows Ultimate x bit sp full retail upgrade edition Norton Security Suite Norton Elby CloneDrive driver AnyDVD vitual mounting drive

A:BSOD IRQ then MEMORY MANAGEMENT

Just an FYI. While Norton was not directly blamed it is a major cause of BSOD's. Just to test I would remove it and replace with Microsoft Security Essentials

Download and run the Norton Removal Tool to uninstall your Norton product | Norton Support

http://www.microsoft.com/security_essentials/

http://www.sevenforums.com/bsod-help-support/166805-bsod-irq-then-memory-management.html
Relevancy 64.93%

Dears,

Kindly note that I received Blue screen error many times recently Please advise about the cause of this last crash was due to memory management error knowing that I tested the memory and it passed without any issues.

Please find attached the dump files .

Thanks

http://www.eightforums.com/bsod-crashes-debugging/73348-bsod-memory-management.html
Relevancy 64.93%

I receive bsods quite frequently and I've never been bothered to solve them but now i want to. My most recent bsod contained in the folder (072713-61183-01 and 072613-70138-01) are two that i would mainly like you to look at but the others are there for reference.

OS - Windows 7
x64
The original OS is Windows 7
The OS is pre-installed from when I first bout the PC
The PC is around a year old.
I haven't reinstalled the OS.

CPU - Intel Croe i7-2600 CPU @ 3.40 Ghz
GPU - AMD HD6770 IGB DDR5
Motherboard- Unknown
Power Supply - Unknown

System - Advent 1413
(Link to PC - Advent DT1413 Desktop PC (Intel i7-2600, 8GB RAM, 2TB HDD) | eBay)

A:BSOD - Memory Management

Hi,

In the MEMORY_MANAGEMENT (1a) dump, the first parameter is 41790.


Quote:




BugCheck 1A, {41790, fffffa8006aa7690, ffff, 0}




41790 - Page table has become corrupt, and the page table is used to store mappings between physical and virtual memory addresses.

If we look at the call stack:


Code:
6: kd> kv
Child-SP RetAddr : Args to Child : Call Site
fffff880`0aa23818 fffff800`03344d40 : 00000000`0000001a 00000000`00041790 fffffa80`06aa7690 00000000`0000ffff : nt!KeBugCheckEx
fffff880`0aa23820 fffff800`032c03ff : fffffa80`00000000 00000000`2004ffff 00000000`00000000 00000000`00000000 : nt! ?? ::FNODOBFM::`string'+0x35084
fffff880`0aa239e0 fffff800`032d2e93 : ffffffff`ffffffff 00000000`0862f418 00000000`0862f410 00000000`00008000 : nt!NtFreeVirtualMemory+0x61f
fffff880`0aa23ae0 00000000`778e14fa : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13 (TrapFrame @ fffff880`0aa23ae0)
00000000`0862f3d8 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x778e14fa
We can see a virtual memory routine being called by the kernel.

Furthermore, if we inspect the PFN database data structure:


Code:
6: kd> dt nt!_MMPFN fffffa8006aa7690
+0x000 u1 : <unnamed-tag>
+0x008 u2 : <unnamed-tag>
+0x010 PteAddress : 0xfffff6fb`40000480 _MMPTE
+0x010 VolatilePteAddress : 0xfffff6fb`40000480 Void
+0x010 Lock : 0n1073742976
+0x010 PteLong : 0xfffff6fb`40000480
+0x018 u3 : <unnamed-tag>
+0x01c UsedPageTableEntries : 0xffff
+0x01e VaType : 0 ''
+0x01f ViewCount : 0 ''
+0x020 OriginalPte : _MMPTE
+0x020 AweReferenceCount : 0n128
+0x028 u4 : <unnamed-tag>
We can see that UsedPageTableEntries has dropped below zero. With this said, I am thinking a device driver is causing corruption.

Before moving onto that though, do the following:

1. remove AVG with the removal tool and replace with Microsoft Security Essentials~

avg removal tool - AVG | Download tools and utilities

MSE - Microsoft Security Essentials - Microsoft Windows

2. I am also seeing reference to Norton:


Quote:




SYMEVENT64x86 fffff880`068ac000 fffff880`068e4000 Wed May 23 20:52:24 2012 (4fbd8648) 00037b8a SYMEVENT64x86.SYS




^^ Norton/Symantec Event Library driver

If Norton is also installed, please remove it. Even if it's not, use the removal tool to get any remnants because there is still a driver here, and possibly more:

Norton removal tool - https://support.norton.com/sp/en/us/...rProfile_en_us
If after doing the following above, you're still crashing~

Enable Driver Verifier to see if we can catch a device driver:

Driver Verifier:

Quote:




What is Driver Verifier?
Driver Verifier is included in Windows 7, Windows Server 2008 R2, Windows Vista, Windows Server 2008, Windows 2000, Windows XP, and Windows Server 2003 to promote stability and reliability; you can use this tool to troubleshoot driver issues. Windows kernel-mode components can cause system corruption or system failures as a result of an improperly written driver, such as an earlier version of a Windows Driver Model (WDM) driver.
Essentially, if there's a 3rd party driver believed to be at issue, enabling Driver Verifier will help flush out the rogue driver by flagging it and causing your system to BSOD.
Before enabling Driver Verifier, it is recommended to create a System Restore Point:
Vista - START | type rstrui - create a restore point
Windows 7 - START | type create | select "Create a Restore Point"
How to enable Driver Verifier:
Start > type "verifier" without the quotes > Select the following options -
1. Select ... Read more

http://www.techsupportforum.com/forums/f299/bsod-memory-management-703201.html
Relevancy 64.93%

Computer Specs eMachine ET - Windows Vista Home Premium SP bit OEM CPU AMD Athlon x Dual Core Processor Video Nvidia Geforce Se Nforce Motherboard Phoenix Age At least years old More info http www bleepingcomputer com forums topic html When I turned on the computer for the first time today after loading there was nothing but blank blueish black screen I rebooted Everything loaded Within a minute again the same type of screen appeared I rebooted again This time I got a message saying Windows has recovered from an unexpected shutdown BSOD: Memory Management Here is the dump file Dump File Mini - dmp Crash Time PM Bug Check String MEMORY MANAGEMENT Bug Check Code x a Parameter x Parameter x fe Parameter x Parameter x Caused By Driver Caused By Address File Description Product Name Company File Version Processor -bit Crash Address Stack Address Stack Address Stack Address Computer Name Full Path C Windows MiniDump Mini - dmp Processors Count Major Version Minor Version Dump File Size Any help is appreciated BSOD: Memory Management

A:BSOD: Memory Management

Let's collect some more information: I'll have a look at it and help you try to resolve the problem. Please follow the instructions: BSOD Posting Instructions: Windows 7 - Vista(Note: When you run BSOD_Windows7_Vista_v2.64_jcgriff2_.exe, it will also run autoruns.exe ... and both need to be in the same location!)... with one exception in the following line:"4. Zip up the entire output folder + PERFMON and attach the zip file to your next post."The BC forums will allow a total attachment size of only 512 kb (and what you need to attach will exceed this limit). Please upload the zip file to a file sharing website of your choice and and post a link to it in this thread so that we can access your uploaded zip file. I will have a look at the contained information and see if I can shed some light on your BSOD issue.See the suggestions in the following links for recommendations on file sharing websites:http://lifehacker.com/388284/best-online-file-sharing-serviceshttp://www.hongkiat.com/blog/15-great-free-online-file-sharing-alternatives/http://www.smashingapps.com/2008/08/28/5-best-free-file-hosting-services-to-store-your-files.html Please Publish a Snapshot using Speccy, and post a link to it in this thread.It is a convenient and accurate way of providing us with details of your computer specifications. Please download MiniToolBox, save it to your desktop and run it.Checkmark the following checkboxes:
List Installed ProgramsClick Go.
When the scan is finished, a text file will open in a Notepad window.Copy the entire contents of the Notepad window, and paste in your reply.
(Result.txt will be saved in the same directory the tool is run.)

http://www.bleepingcomputer.com/forums/t/450826/bsod-memory-management/
Relevancy 64.93%

I had been getting Memory Management BSOD so I ran memtest and removed a bad memory stick. I then ran memtest on the 3 remaining sticks and it found no errors. However, I am still getting this BSOD although not as often.

A:Memory Management BSOD

Just from what you described i would also test each ram slot with different modules to see if you may have a bad ram slot in one of them.

http://www.sevenforums.com/bsod-help-support/319229-memory-management-bsod.html
Relevancy 64.93%

My computer had gone through quite a whole lot of problems such as missing drivers, corruption of Windows, RAM malfunction, and many more. I have fixed almost all of them. Currently there is a major problem that is annoying me and I am unable to solve it. It is this BSOD that I kept encountering. Here are the details.

Details
Bug Check String: MEMORY_MANAGEMENT
Bug Check Code: 0x0000001a
Parameter 1: 0x00041790
Parameter 2: 0xc08020d8
Parameter 3:0x0000ffff
Parameter 4: 0x00000000
Caused by Driver: ntkrnlpa.exe
File Description: NT Kernal & System
Dump File Size: 142,472

I am not too sure is this all you guys need. I will give more info about this crash is needed. I would like to know what really is causing it and what can I do to solve it! Thanks!

A:BSOD about Memory Management

Please follow - Blue Screen of Death (BSOD) Posting Instructions

http://www.sevenforums.com/bsod-help-support/301790-bsod-about-memory-management.html
Relevancy 64.93%

Hey guys So there I am right listening to some tunes and painting in photoshop when suddenly the music stops So I click on Windows Media Player and then some error message comes up saying the library is corrupted and it appears to be wiped clean of all my songs So i m thinking yeah okay whatever i ll just restart it So I click my shortcut right but Help BSOD Management Memory ~ it wouldn t restart Next thing I Help ~ BSOD Memory Management know all my windows are suddenly closing off Firefox quot encounters a problem quot and closes photoshop crashes msn disappears and then windows explorer shuts down screen goes black and whammy BSOD Computer restarts i get right back into things but then it happens again So I restart Help ~ BSOD Memory Management for the second time but this time i m stopped at the welcome screen by graphics glitches and exclamations about things failing to initialise Now I start to worry a bit BSOD says quot Memory Management quot at the top did a search seems like my Memory is probably retarded So I run Memory Diagnostics Tool right it runs the scan says I got hardware problems and tells me to quot Contact Help ~ BSOD Memory Management my Computer Manufacturer quot yeah riight like thats going to help The thing said its gonna restart my computer once the scan was complete but I got a black screen instead saying windows has failed to restart to insert my vista installation DVD and do a repair installation So I don t know what the memory diagnostics tool had to say if it even had anything to say other than that stupid message to contact my manufacturer I try the repair installation but it says nothing is wrong I haven t installed any new software or hardware lately not for several months so it can t be that I did several system restores from different time periods but to no avail So i m sitting here still trying to figure out whats going on In the time thats passed since this first started its been about hours So far i ve had about eight BSODS They seem to happen pretty randomly after a restart and any process i m running don t survive much longer than say - minutes before crashing Are my memory sticks retarded They re about months old Any advice would be appreciated Thanks Some BSOD Codes MEMORY MANAGEMENT x A x xC c x FFFF x Blank x E oxC x x D CBE x PAGE FAULT IN NON PAGED AREA REFERENCE BY POINTER x B xFFFFFFD x c E AAC x BAD POOL HEADER Windows Vista Home Premium Service Pack Bit AMD Athlon X Dual Core Processor GHz GB DRR RAM ASUS M N plus SLI Vista Edition Motherboard Nvidia GeForce GTS nbsp

Relevancy 64.93%

OS - Windows x Management Memory BSOD -bit What was original installed OS on system WIN starter But I formatted and installed WIN Ultimate Is the OS an OEM version came pre-installed on system or full retail version YOU purchased it from retailer I saved my certificate from pre-installed win starter Then I downloaded ultimate MSDN version and used my back-upped certificate and the ASUS win ultimate SLP-key to activate Ultimate Age of system hardware Not old it is BSOD Memory Management a ASUS EeePC PE Age of OS installation - have you re-installed the OS Yes re-installled with MSDN win ultimate a week ago checked md file-hashes ISO was ok After the install I got a BSOD Bad Pool Header Then I downloaded drivergenius pro from driver-soft and updated all drivers This seemed to have solved that BSOD CPU Intel Atom N MHz x Video Card Intel R Graphics Media Accelerator MB Motherboard Name Asus Eee PC P Motherboard Chipset Intel Tiger Point NM Intel Pineview-M Battery Designed Capacity mWh cell BIOS Version latest version on the asus support Quick summary Netbook Asus EeePC PE I installed win ultimate a week ago First I got a BSOD Bad Pool Header times I think I fixed this with updating the wireless drivers And recently I got a BSOD only time till now This BSOD happened while I was typing a Word document It was called BSOD Memory Management I attached all the bsod files in a zip according to BSOD posting instructions Hope you guys can help me out here

A:BSOD Memory Management

Hi again, I started doing hardware diagnostic tests. So I got memtest here;
http://www.memtest.org/#downiso

Installed on my flashUSB, booted. And after a 40minutes (or so) of testing, I got this two errors. The netbook is only 2 weeks old, so there is something weird going on here or not? I made a photo of my screen and I attached it.

http://www.techsupportforum.com/forums/f299/bsod-memory-management-533064.html
Relevancy 64.93%

? Windows 7 Pro SP1 x64
? This is a custom built computer. I reimaged Windows 7 a few weeks ago after having the same BSOD problem.
? The hardware is about 1.5 years old.
? Intel Core i5 CPU 760 @ 2.80 GHz (x4)
? ATI Radeon HD 5700 Series
? MSI MS-7588
? OCZ ModXStream Pro 700 W

I get a blue screen every few days that says Memory Management on it. I reimaged the computer to try to fix it, but the problem persisted. I have attached a zip file with the contents asked for in the posting instructions. The blue screen is more likely to occur when I am doing something more strenuous on the computer (like The Sims 3 on full graphics), but also happens sometimes when I'm doing something simple, like browsing the internet.
Any help or insight is much appreciated. Thanks!

A:Memory Management BSOD

Please run these tests and report back the results
1. Memtest86 - Run for 7-8 passes - RAM - Test with Memtest86+ - Windows 7 Forums
2. Prime95 - Run all three tests for 3-4 hours each or until fail - Hardware - Stress Test With Prime95 - Windows 7 Forums
3. Hard drive scan usings SeaTools - SeaTools for Windows | Seagate - Both long and short tests
4. Disk Check - Windows 7 Forums
5. SFC /SCANNOW Command - System File Checker - Windows 7 Forums


BSOD BUGCHECK SUMMARY

Code:

Built by: 7601.17727.amd64fre.win7sp1_gdr.111118-2330
Debug session time: Fri Mar 16 20:24:32.782 2012 (UTC - 4:00)
System Uptime: 2 days 2:41:46.750
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+3266c )
BUGCHECK_STR: 0x1a_403
PROCESS_NAME: TS3W.exe
FAILURE_BUCKET_ID: X64_0x1a_403_nt!_??_::FNODOBFM::_string_+3266c
BiosReleaseDate = 04/16/2010
SystemManufacturer = MSI
SystemProductName = MS-7588
CPUID: "Intel(R) Core(TM) i5 CPU 760 @ 2.80GHz"
MaxSpeed: 2800
CurrentSpeed: 2807
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.17727.amd64fre.win7sp1_gdr.111118-2330
Debug session time: Wed Mar 14 17:42:22.060 2012 (UTC - 4:00)
System Uptime: 0 days 14:25:22.028
Probably caused by : ACPI.sys
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0x9F_3_intelppm_IMAGE_ACPI.sys
BiosReleaseDate = 04/16/2010
SystemManufacturer = MSI
SystemProductName = MS-7588
CPUID: "Intel(R) Core(TM) i5 CPU 760 @ 2.80GHz"
MaxSpeed: 2800
CurrentSpeed: 2807
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Thu Mar 8 17:47:30.998 2012 (UTC - 4:00)
System Uptime: 2 days 22:25:56.966
Probably caused by : fastfat.SYS ( fastfat!FatCommonWrite+1a0f )
PROCESS_NAME: iTunes.exe
ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
BUGCHECK_STR: 0x23
FAILURE_BUCKET_ID: X64_0x23_fastfat!FatCommonWrite+1a0f
BiosReleaseDate = 04/16/2010
SystemManufacturer = MSI
SystemProductName = MS-7588
CPUID: "Intel(R) Core(TM) i5 CPU 760 @ 2.80GHz"
MaxSpeed: 2800
CurrentSpeed: 2807
??????????????????????????????????????????????????????????????????????????????????????``

http://www.techsupportforum.com/forums/f299/memory-management-bsod-636146.html
Relevancy 64.93%

My wife's PC has been popping the blue screen very frequently as of late.
I finally pulled all the memory out and put them back in one by one till I found a combination that the memory utility produced no errors with. Thus far (About 3 weeks now) it has been perfect. Then today, boom, BSoD, Memory Management error.
Any ideas on which steps come next?

A:BSoD, Memory Management

Go to Memtest86+ download the ISO image then burn it to a blank cd using Imgburn (how to burn an ISO image to cd using Imgburn) burn at lowest speed. With the newly burned cd and one RAM module at a time, boot with the cd and run at least 7 passes errors will be in RED

Repeat the process with each RAM Module at a time.

http://www.techsupportforum.com/forums/f217/bsod-memory-management-639583.html