Windows Support Forum

Multiple BSODs al from ntoskrnl.exe+75bc0

Q: Multiple BSODs al from ntoskrnl.exe+75bc0

I have been getting BSODs everyday now for the past 2 days.
They happen randomly whether im playing a game, watchin a stream, or just sitting on my computer.
Any help would be much appreciated.

Relevancy 100%
Preferred Solution: Multiple BSODs al from ntoskrnl.exe+75bc0

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Multiple BSODs al from ntoskrnl.exe+75bc0

Please provide detailed system specifications as per this tutorial:
System Info - See Your System Specs

http://www.sevenforums.com/bsod-help-support/325558-multiple-bsods-al-ntoskrnl-exe-75bc0.html
Relevancy 22.36%

I am purchasing a MSI GTX 960 Gaming 4G GPU, and I think it has capablilities for 4 monitors to be displayed as a single desktop. If this is true, what cables should I get, and any ideas for decent cheap monitors? My plan is to have three monitors side by side as a single entity, and a fourth on the side as a reference screen (I would prefer this one to be rather small, like 6-8 inch)
 

A:Multiple Monitors?

You should count a number of output ports in your system first. Found a good guide on this topic: http://www.techradar.com/news/compu...e-complete-guide-to-multiple-monitors-1074313
 

http://www.techspot.com/community/topics/multiple-monitors.214718/
Relevancy 21.5%

How can I setup multiple monitor in Eyefinity?

My Card is Sapphire Dual-X R9 270x 2GB http://www.newegg.com/Product/Produ...DUAL-X_R9_270X_2GB-_-9SIA2RY1DG6402-_-Product I Have 2
Connections are I have 2 Monitors connected on 1 Card then 1 Monitor for the other
All of it are in DVI
Problem is in Eyefinity I don't know how to setup for it to be only one whole desktop
 

A:Setting Up Multiple Monitor with 2 Graphics Card in Eyefinity

I would check this thread out: http://goo.gl/4z2Azv
 

http://www.techspot.com/community/topics/setting-up-multiple-monitor-with-2-graphics-card-in-eyefinity.202756/
Relevancy 21.5%

Hi,
I am creating a small demo software wherein 4 simple mono-audio speakers need to be connected to my laptop, the main program, written in Java will play audio from one of the speakers depending on the input cue.

How do I go about achieving this? Any tips, hints most appreciated.

TIA!
 

A:Connecting multiple speakers to my laptop and controlling them individually

First, the laptop audio is not a home sound system and can be easily overloaded with what you are attempting - - don't drive this at high output volumes!

this will show the wiring to get all 4 with output at the same time.



The speakers in parallel like this create a load 4x heavier than just one speaker.
Get 8ohm speakers like these http://www.radioshack.com/8-ohm-mini-speaker/2730092.html
which will reduce the load to only 2x.

The red circles are individual volume controls. Place a toggle switch between the controls and the speakers and you can play 1, 1+2, 1+2+3 or all four.
 

http://www.techspot.com/community/topics/connecting-multiple-speakers-to-my-laptop-and-controlling-them-individually.207277/
Relevancy 21.5%

So... like most of world my family lives online. Having found that ISP pricing in Alaska is horrendously expensive, I want to find a solution that I can create 4 SSIDs, one for each of my three kids (ages 12, 14, &16) and one for me and my wife, and place a data cap on each SSID so that I can't be hit up with the bills that come with overages. I figure with individual SSIDs they can use what ever device they have with out having to detirmine MAC addresses or IPs used or any of that other stuff.

I would like to have just one router be able to accomplish this. I have an older router, an Apple Time Capsule I bought about 6 years ago, but as I don't use Macintosh computers any more, I would be happy to buy a new router and get it set up to manage this dilema.

Any Advice or suggestions will be greatly appreciated.

Thanks.
 

http://www.techspot.com/community/topics/router-and-networking-multiple-ssids-and-data-cap-per-ssid.200229/
Relevancy 30.53%

Our ISP recently updated their hard ware to work with the Sprint network Note our ISP is not Sprint but the local phone company Our Hardware Internet DSL highest speed available Modem Comtrend ISP provides Router Belkin N Computer yr old Dell running XP - service pac - wired connection Kindle Fire first edition no HD etc - wireless connection Xbox - wireless connection Issues Xbox - went from constantly bumped from Xbox Live game by losing internet connection to not being able to enter a game at all Kindle - went from occasional quot network error message during online tasks to having to restart download multiple times or refresh page for most any or all online tasks Computer - have to click refresh to get most any page to load after the home page What we ve tried so far I have recently cleared the cache on both the computer and Kindle XBox s new security measures have been met My questions Do any or all multiple issues devices Multiple over of these issues seem to be related Is there a piece of equipment or something we may be missing to make all of these things work I am a networking novice Who should I call to get these issues corrected my ISP or a tech service Note if I start with the ISP and they do not find an issue I have to pay for the call nbsp

A:Multiple issues over multiple devices

First. You should try to NOT use a wireless connection for any type of gaming: PC, Mac, Console, etc. If you can hard wire the xbox you'll be waaay better off than using wireless.

Now... Yes, the issues could be related - there maybe an issue with the Belkin N router. I'd try to first reset the Belkin router to default settings, check on manufacturer website for instructions how, most routers you can press a "reset" button w/ a paperclip or ball point pen. Reconfigure the Belkin router, recreate the wireless network and see how everything works. If you are still having issues, humor me and connect the Dell directly to the DSL modem, bypassing Belkin router. See if you still have connection issues, if you do then it could be the DSL modem that is the problem and call your ISP to replace. If you don't have same issues then it's most likely an issue with the Belkin router. Replace it. Don't buy the dirt cheapest router at the store, but you most likely don't need the most expensive one either. Find a good middle ground router, ask sales associate to assist you accordingly.

Post back, Hope this helps!!
 

http://www.techspot.com/community/topics/multiple-issues-over-multiple-devices.198798/
Relevancy 21.5%

So, I recently bought an Asus UX31a running windows 8(in may) and it was working perfectly until a couple months ago. The only browser that works is internet explorer, which is disgusting (I miss Google Chrome) and several programs such as Adobe reader, Google drive, steam and visual studio either lag for about 5 mins each whenever I want to use them (or click something in them), or I have to close them with the task manager because they aren't responding...(This includes when I want to open pdf documents in internet explorer.

I've run several virus checks with ESET smart security which hasn't ever found any viruses...

It would be a great help if anybody could help me find what the problem is.
 

A:Multiple programs are stopping to work, also, I don't appear to have had or ever have a virus.

Try using a new Windows Restore point. This may not work because of "it was working perfectly until a couple months ago"... It is most likely caused from a stubborn malware infection other than a virus
 

http://www.techspot.com/community/topics/multiple-programs-are-stopping-to-work-also-i-dont-appear-to-have-had-or-ever-have-a-virus.196063/
Relevancy 22.36%

I have a asus rampage extreme II i7 cpu stock fan.The Antec case has a huge 200 mil top fan a standard exhaust fan and two front fans all have speed controls except cpu fan,if I adjust any fans speed above low it shuts off the cpu fan if I adjust any fan to hi the cpu fan shuts off.
 

http://www.techspot.com/community/topics/multiple-fan-speeds.193982/
Relevancy 21.5%

Hey multiple Black screen with video playback guys I have been trying to figure out this problem but with no avail so any advice is greaty appreciated Basically the problem occurs when running any type of Black screen with multiple video playback game wow and ffxi to name a few but occurs with everyone and then tab out to wither youtube fraps and the like the screen goes totally black and I must restart the computer Ive wiped the HD several times and have redone even to the most basic setup and it still occurs Specs are as follows Motherboard Asus maximus v extreme Intel i k gb Corsair Vengeance gb SSD w PSU x ASUS Radeon HD gb Ive made sure all drivers are up to date I have run memtest on both sticks of ram and they seem to pass with no errors when only video card is plugged in Black screen with multiple video playback I have no problems it seems to have something to do when they are crossfired I ve tried different bridges and still same result nbsp

A:Black screen with multiple video playback

Sounds like we have the same thing going on. Does your screen have any windows poop up? mine does.
 

http://www.techspot.com/community/topics/black-screen-with-multiple-video-playback.192857/
Relevancy 21.93%

See the description in full on the Cisco.com/security site
 

A:Multiple vulnerabilities in Cisco ASA software

I read about this yesterday. This is a big exploit and needs to be fixed. Too bad there are too many newbies that wont know how to update the firmware or arent even aware of this issue.
 

http://www.techspot.com/community/topics/multiple-vulnerabilities-in-cisco-asa-software.191502/
Relevancy 21.93%

Guys I ask this just out of curiosity what is the pros and cons of more than one monitors.Does they have any uses than gaming?thanks
 

A:Pros and cons of multiple displays

Yes. I have a two monitor set up, (with an "extended desktop")
One I have in portrait, the other in landscape.
These are primarily for desktop publishing purposes.
Sometimes I want to view my work one way, sometimes the other.

I had always wondered how anyone would like it for gaming.
Seems to me the movement between screens, and breaks in field of vision could be issues.
But, I am not a gamer, so what would I know.

Cons? for me?
Holding my neck / head in one position for extended periods ,
other than a centered/neutral position,
can result in some neck pain.
Solution is to compensate by how I position myself,
and using the dual monitor stand's full ability to tilt, swivel etc.
Younger persons may not notice the issue as much.

I cannot imagine how I would use a set up with more than two monitors though.

This stand has been excellent for my purposes.
They also make a four monitor (2x2) version,
and I have seen stands where you can mount 3 monitors side by side.

By the way this set up is used alternately with..
a) Dell Vostro 3550 Laptop (has an i3 processor, and both HDMI and VGA out)
b) On board graphics with a Gigabye GA-Z77X-UD5H (has two HDMI, plus DVI, plus VGA)
So, no fancy graphics card setups here!
 

http://www.techspot.com/community/topics/pros-and-cons-of-multiple-displays.190800/
Relevancy 22.36%

Hello I am currently working as the IT for this clinic and other clinics as well We are all networked in together despite being miles apart from one another We currently have an older computer running XP as a file server so certain files can be accessed and updated from any of these clinics The problem is that there can only be users accessing it at once We have grown just offices Multiple in the short time I have been here This computer was setup before I was hired on We are now in need another computer to give us the same functions Most of our computers now are on Windows bit There are still plenty Xp computers Multiple offices as well I am wondering how to get a Windows computer to host files in the same way I Multiple offices can get it to where this entire building can access this public folder but none of the other clinics can Are ip setup is like this x--- x The second to last digit represents the office There will be offices in Multiple offices all that will need access Any ideas how to make it so all offices can reach this folder P S I can dig up an Xp computer if it will be easier nbsp

A:Multiple offices

You are still going to be limited on the number of simultaneous connections... I would personally put a linux smb server in place of that current file server if someone has the skill to set one up and manage it (hint: you).

http://answers.microsoft.com/en-us/...indows-7/f8cf24db-b640-4916-8f06-d2be52edaf91
 

http://www.techspot.com/community/topics/multiple-offices.188996/
Relevancy 22.36%

Morning all The audio jack on my tablet has stopped working which doesn t bother me too much because I ve got some bluetooth headphones which I use to listen to my music on there However I ve got a huge flight coming up soon with my partner and there s loads of TV shows I have on it that we d ideally want to watch and listen to together If only my audio Multiple headphones bluetooth out worked I could just put a headphone splitter into it But I Multiple bluetooth headphones m trying to investigate whether you can get a bluetooth receiver like this http www amazon co uk JUSTOP-BTR -Bluetooth-Wireless-Universal dp B NDDEVQ So that receiver will pick up the audio then pass the audio into something like this http www amazon co uk Belkin-BKF s electronics amp ie UTF amp qid amp sr - Which I can then plug two sets of headphones into and bingo we can both watch and listen to the same thing on my tablet on the plane Would that work Or have I created a ludicrously complicated way of achieving this when a much simpler multi-bluetooth audio out system exists In a nutshell my question is this What s the easiest way get audio to two sets of headphones from one tablet if the audio out plug doesn t work nbsp

A:Multiple bluetooth headphones

I dont think your bluetooth audio adapter is able to drive 2 headphones at reasonable volume level. unless, you get a small headphone amplifier. but then you'll have 3 devices connected and I think it's not worth the hassle. the amplifier itself is cheap, look for something like fiio e3. I have it and it should cost less than 10 bucks.

http://www.amazon.co.uk/FiiO-E3-Hea...1?s=electronics&ie=UTF8&qid=1353073889&sr=1-1

http://www.amazon.co.uk/Belkin-3-5m...2?s=electronics&ie=UTF8&qid=1353073843&sr=1-2

a single alkaline AAA battery could last for about 10h on my heavy usage. but im not sure if the bluetooth adapter could do the same.

bluetooth adapter -> fiio e3 -> 2way splitter

actually this way, it wouldnt be too much of a hassle. the 3.5mm jack of the bluetooth can be plugged directly into the fiio e3 as well as the 2way splitter.
 

http://www.techspot.com/community/topics/multiple-bluetooth-headphones.187262/
Relevancy 22.36%

If my video card has 1 HDMI port and another port (Not sure which one, DVI or VGA) am I able to hookup two monitors using each of those ports? Or must I have both monitors be connected through HDMI or VGA/DVI?
 

A:Multiple monitor question

What video card is it? If it's got 2 outputs then it should mean you can just plug one monitor into each.
 

http://www.techspot.com/community/topics/multiple-monitor-question.184478/
Relevancy 21.5%

Hi folks I m new here and not greatly technically minded My Acer Aspire Z laptop has been acting strange for a few days running Windows btw Some of the issues are even happening right now ie as I type the cursor will sometimes restart a new line as if I ve pressed the Return button Acer apps is Laptop and and more opens multiple corrupted This is esp bad in emails and Facebook and often the cursor flies down miles Acer Laptop is corrupted and opens multiple apps and more making it a pain to get back to where I was That s not all though There s a horrible beeping noise when I start up the laptop first thing It goes after I press one of the F buttons The worst though is when I try to open up some app on my desktop and sometimes the laptop goes crazy and opens up multiple other apps software There have been instances where there are dozens of the same pages opening I have McAfee Internet Security and have run Malwarebytes and Spybot but problem is still there Is this a hardware problem do Acer Laptop is corrupted and opens multiple apps and more you think I m not great at techie Acer Laptop is corrupted and opens multiple apps and more speak so please go easy with me but I d be grateful for any advice Cheers David nbsp

A:Acer Laptop is corrupted and opens multiple apps and more

UNless someone else has a better idea, how old is this computer & is it still under warranty? If so, I'd get a hold of the where you bought it & get it checked out. IF you don't & have "other" work done on it, it could VOID the warranty.
 

http://www.techspot.com/community/topics/acer-laptop-is-corrupted-and-opens-multiple-apps-and-more.183988/
Relevancy 22.36%

I m just dipping a toe into multi-monitor use and have some questions I using monitors time multiple First have a inch and a inch monitor at the moment have another and to use if need be later I have a ATI card I have both monitors plugged into the video card I ve noticed when I extend the desktop to both screens I have some quot flickering quot on the second inch monitor Almost like its trying to adjust itself to something automatically It only flickers when I scroll the mouse wheel up and down First time using multiple monitors a page or move a window around etc Seems to happen when one screen has a browser at full screen and something might be leaking over to the other screen not sure if I can explain it better than that When I create an eyefinity group even though the monitors are different I see no flickering at all all is well Just wondering if this is some setting on the smaller monitor I need to look into Its a Dell FPV ALSO I am assuming this videocard with two monitors on it may take a performance hit if I use it while gaming For example have the inch be the gamer monitor and have the inch showing the desktop with a browser window or teamspeak on it Also I m looking through my parts here and I have some older video cards I may look into adding one just for the second monitor on the desktop Thoughts nbsp

A:First time using multiple monitors

im no expert but it could be your refresh rate on the second monitor is different from the first so that could be it,

1.go to control panel under appearance and personalization click adjust screen resolution

2.click the monitor you want to change

3.click advanced setting and monitor tab and change the refresh rate

and your gaming fps should not go down through the multi display set up unless your doing something graphic/cpu demanding task
 

http://www.techspot.com/community/topics/first-time-using-multiple-monitors.183934/
Relevancy 21.5%

Hello all I multiple monitors for a card video new Purchasing ve been interested in upgrading my work station also gaming station Purchasing a new video card for multiple monitors by investing in multiple monitors I m not looking for more than monitors but I would like to have at least monitors I currently have a monitor that I have plugged into a graphics card that hasn t let me down yet Its connection to the monitor is DVI but I d like all new monitors to use HDMI cables My computer from Dell is an XPS I believe Core i GHz GB RAM Win -bit ATI Radeon HD Money is only part of an issue -- I m open to suggestions on higher-end and lower-end products My questions for you all are What kind of graphics card should I be looking for and should I look into a card that can support multiple monitors and should I use my old one Will there be any conflicts I will need to be aware of while proceeding through this process What would you all recommend for monitor setup What is the best setup for gaming with clear smooth screens Do I need to upgrade any other hardware parts to make this all work together Thank you all in advance A nbsp

A:Purchasing a new video card for multiple monitors

The Radeon 5700 series should support up to 5 monitors. I have not personally used a multi monitor setup for gaming however from what I hear a lot games either arent designed for multimonitor setups or they dont work very well. However, there are some games that are really nice with a multi monitor setup. So you should probably ask yourself what games you are going to be playing and see if those work well with a multi monitor setup. Also, Multi monitor setups require a large display resolution so your videocard will be working overtime. I dont think a 5700 series card will have the oomph to really makes games run smoothly at larger resolutions. So, I dont know what your budget is but I would guess you may have to upgrade your card to something more recent, say a 7800 or 7900 series. I cant comment on Nvidia cards as I am not as familiar with them.
As far as compatibility goes you may need a display port adapter for the third monitor. These are relatively cheap. Also at 525 Watts your power supply barely meets the system requirements for a new card so depending on what else is pulling power in your system you may or may not need a new power supply.

Maybe someone else can chime in with some Nvidia options.
 

http://www.techspot.com/community/topics/purchasing-a-new-video-card-for-multiple-monitors.183516/
Relevancy 22.36%

Hello, Long time no speak Paladins.

I'm considering on getting a new UPS for my PCs, specifically the CyberPower CP1350AVRL, either locally or newegg. I'd be running two computers on this unit and for those who uses CyberPower's UPSs, is there a way to manage two computers with it, considering it has both a USB and serial port?

Assuming it does not, Anyone have any ideas how I could emulate this, or have the PC with the datalink to the UPS shutdown the other? Perhaps using an event to invoke the shutdown command to close a remote computer would be the most raw way of doing it, but I'd love to know if there is a more elegant way.
 

A:Hibernate multiple computers with UPS?

I don't believe there is a "built in" remote function but the script works.
http://www.windowsnetworking.com/kb...owToEnableHibernationOnMultipleComputers.html

There is also EMCO Remote Shutdown.
 

http://www.techspot.com/community/topics/hibernate-multiple-computers-with-ups.179282/
Relevancy 22.36%

Perhaps this is more suited for the Windows sub-forum, but I'll try here first.

I have a laptop connected to two different networks (both with internet), one via wifi and one via an ethernet cable. Is it possible in Windows to dictate which network any particular application will use?

For example, I would prefer it if Outlook pulled from one network while my browsers from another.

Thanks for any advice!
 

http://www.techspot.com/community/topics/computer-on-multiple-networks.178812/
Relevancy 22.36%

Hello, this is my first post in a forum ever, haha. So I currently am using OCZ DDR2 PC2_6400 2x2GB of RAM that runs at 2.1Volts according to OCZ's website. And without knowing, I purchased Crucial DDR2 PC2_6400 2x2GB RAM that runs at 1.8Volts according to Crucial's Website. I want to upgrade my computer to have 8GB of RAM but when I added the Crucial RAM, my computer blue screened and now I have to run a system recovery to fix the corrupt sectors. I think the blue screen may be related to the difference in voltage because everything else is the same (minus the manufacturer). Should I set my motherboard to run at a specific voltage? If so, which voltage should I use? I have MSI P6N SLI Platinum mobo.

Thanks!
Brent
 

A:What voltage should I use for multiple RAM?

Update to the Multiple Ram Question

Last night after I ran the system recovery to repair the bad sectors. I booted up with the original configuration of OCZ 2x2GB of RAM there were no issues. I shut down, installed the additional 2x2GB of RAM. Went into BIOS and set Voltage to 1.8 and booted up. It booted up without a problem this time. I'm OK for now, but I don't know if 1.8 is a bad voltage to run at for the OCZ RAM since it's specs are for 2.1 Volts.

-Brent
 

http://www.techspot.com/community/topics/what-voltage-should-i-use-for-multiple-ram.178242/
Relevancy 22.36%

ok well this is going to sound crazy but here we go i have a ubee cable modem router model number u10c037 out of that i'm going to two linksys wrt54g's to split to all the rooms in my house then in two of the rooms i have linksys befsr41's and finaly in one room i have a net gear wgr614v10 now it works sorta but i keep having to reset them every now and again right now i'm useing all of the down stream routers as switches what i'm asking is why do i have to keep resetting the system and what can i do to keep it from happening if anyone can help me in great detail i would be very happy i think its an ip address problem but not sure
 

A:Multiple routers 6

Starting from the modem;
isp = = modem --->(WAN port)ROUTER#1​then to have ALL systems on one network, daisy chain from R#1 to the next but
ONLY connect (LAN)-->(LAN) between all the others. Router#1 will now control
al DHCP assignments - - even for any WiFi router in the chain.

This requires that ONLY R#1 have an active DHCP, so each of the others need
to be set to disable DHCP.

1) One-by-one, connect Router#x via wire to a system, use your browser to access the
router default address, login using the user/password for that router, and DISABLE DHCP.

2) Many routers come preconfigured for lan address 192.168.x.1 where x is 0,1, or 2

Every network can never have duplicate IP address and if allowed, will case network failures.

As you disable the DHCP, also set a new default LAN address 10.0.x.1
where X is 1,2,3,... N and use a new X for each one you've fixed.
Thus, if ever they are wired R1(lan)--(wan)R2---(wan)R3---(wan)R4)
the addresses would be 10.0.1.1-->10.0.2.1-->10.0.3.1-->10.0.4.1
(but you don't want that for routing table reasons)

3) also change the default password for each router.
If your system login password is abcdefg,
you might set the primary router#1 password to abcdefg#1
router#2 to abcdefg#2 and so on.
 

http://www.techspot.com/community/topics/multiple-routers-6.177545/
Relevancy 21.5%

I am interested in starting an online live interactive multiple my I live streaming do run computer? on How for cameras cooking lesson series I want to stream the lessons for - people using a video conferencing program goto meeting VeaMea Cisco Webex not sure which one yet through our laptop I want to have two or three cameras running through my laptop that i can toggle through One would be a wide shot of me and How do I run multiple cameras for live streaming on my computer? the kitchen Another would be a close up of the cutting board to demonstrate cutting techniques and one camera mounted above the stove for when i am cooking I want to be able to change cameras with a click of the mouse during the lesson and then be able to change back Can I hook up or cameras to How do I run multiple cameras for live streaming on my computer? my laptop Intel core i - m with gig ddr and accomplish what i want to do or is there no way in heck that this little laptop is powerful enough I am currently looking at high quality usb HD webcams Any help or guidance would be very much appreciated If this is not the best forum and you know a better one please advise Thanks Willy nbsp

A:How do I run multiple cameras for live streaming on my computer?

Seems nobody has an answer to this question. Can anyone point me in the right direction to get an answer? Anyone, please?
 

http://www.techspot.com/community/topics/how-do-i-run-multiple-cameras-for-live-streaming-on-my-computer.176797/
Relevancy 21.5%

Micro-Star Int: 880GM-E43 (MS-7596) motherboard
AMD Athlon IIx4 chipset
Current graphics card: ATI Radeon HD4250 (yea, I know)

I want to upgrade the graphics card for multiple monitors (2 min - 3 max). I'm no longer an avid gamer, but want the option as well as multiple monitors.

Dual 23" LCD's

Thanks for the help.
 

A:Need to upgrade graphics card for multiple monitors

Go for an Nvidia 560TI or a 570, they will both clock down when you disable your second monitor Mugemon is a great utility for this. 560TI = £200, 570 = £275
 

http://www.techspot.com/community/topics/need-to-upgrade-graphics-card-for-multiple-monitors.174561/
Relevancy 21.5%

Situation A custom built hand-me-down PC albeit a good few years old now comprising of One getting multiple Problems using one OS's on whilst PC Internet access IDE Drive one partition with Windows XP Home - original installation One SATA Drive four partitions with Windows Vista Home Edition and XP Pro the other two partitions are currently spare - new OS installations Nvidia NF -S V Motherboard - BIOS now up-to-date with all relevant drivers -Wire BT Broadband Problems getting Internet access whilst using multiple OS's on one PC Business Hub Problem bearing in mind I have little knowledge of using multiple volumes and or Networking do s and don t s etc etc - hence the post XP Home on IDE drive will connect to the internet as it always has done via the Ethernet Cable connected to the Router but it does not recognise the Gateways USB cable option yellow exclamation mark in Device Manager - and it won t can t install a driver from any location - Router Installation CD Windows systems Windows up-date etc XP Pro on one of the new partitions on the SATA drive will connect to the internet but ONLY via the USB cable when connected to the Router - it s the opposite to the above problem when booting from that partition i e it does not recognise the Gateways Ethernet connection this time it s a yellow exclamation mark against the Ethernet Controller AND the SM Bus Controller - again neither will find install a driver from any location Vista on the other SATA drive partition works perfectly regardless of how it s connected to the same router i e USB cable or Ethernet - there are no yellow exclamation marks in Device Manager and all hardware and associated drivers are fine and detailed correctly Is it simply an XP thing when using multiple volumes and or partitions with the same router as the problem obviously isn t present when booting from the Vista installation or do I need to set certain parameters somewhere for all OS s to independently recognise all assocaited drivers regardless of connection type It s not a major problem as I can access the intenet regardless of which OS I use but it s a little annoying knowing that I have to use one connection method over another if I boot an XP installation Thanks in advance for any feedback or walk through tips that might help Oh and by the way as strange as it probably sounds yes I would like to have XP Home XP Professional and Vista Home Premium all on the same PC nbsp

A:Problems getting Internet access whilst using multiple OS's on one PC

Virtual Madness said:





Oh, and by the way, as strange as it probably sounds, yes, I would like to have XP Home, XP Professional and Vista Home Premium all on the same PC.Click to expand...

You could just use virtual machines for the other two operating systems -- assuming the hardware can handle the load of a VM (it should if you have Vista running) and you don't need to leverage massive resources for 3D or gaming on the VMs.

Your just tripling the complexities by running 3 host OS' in my honest opinion. While I agree they should all work, you'd only need to tackle one OS if you ran the rest as guests.

Out of idle curiosity why do you need separate XP home and professional versions, as well as Vista anyway?
 

http://www.techspot.com/community/topics/problems-getting-internet-access-whilst-using-multiple-oss-on-one-pc.174144/
Relevancy 22.36%

Hi . I have an annoying problem that drives me insane. First of all I am running Windows 7 x32, just to get that out of the way. Second, a lot of public networks keep appearing in my "Network and Sharing Center", and I have no idea why. I have tried to disable the LAN connection and delete the networks one by one, but after I reactivate the LAN Connection they appear again.
I have never encountered this problem, so I really have no resolve for it. You might say that it's not that annoying, but after some time....trust me...it get's on your nerves if you are curious like me to know how to resolve this issue :haha:

Have a nice day,
ShiDomY
 

A:Multiple networks appearing out of nowhere

get a command prompt (start->run->cmd) and enter IPCONFIG /ALL >MyTCP.txt

The file MyTCP.txt will then contain all the details of your connections.
If you paste the contents of that file into your followup, we can discuss with more clarity.
 

http://www.techspot.com/community/topics/multiple-networks-appearing-out-of-nowhere.172614/
Relevancy 22.36%

my HP Pavilion dv is having a start up problem such that the system when trying to start up and power light shows after some seconds say - it tries restarting again and again like a cycle within those seconds range During this time the screen shows nothing black After doing this for like - times it now comes up my Multiple problems in help! please laptop, starting to desktop This is quite embarrasing please I need some help and idea on what to do It sound siezed one day and shows a red x over the speaker icon on the taskbar Multiple problems in my laptop, please help! The Sound Controllers has dissapeared from Device Manager making the system behaves as if there is no Sound Card Hardware attached to the board I ve tried downloading Microsoft UAA to bring out the hardware from board but all the ones I found on internet was for Realtek but mine uses Conexant Audio Device The system runs on Windows -bit OS AMD Turion tm X mobile technology TL- GHz processor How can a screen and flex problem be differentiated since both have similar symptoms Any help to the above problems would be highly appreciated Thanks nbsp

http://www.techspot.com/community/topics/multiple-problems-in-my-laptop-please-help.171873/
Relevancy 21.93%

Hello I have what I consider a very basic understanding of networking I work for an IT solutions provider and a restaurant chain which we support needs to fix a PCI compliance issue The network at the location was put in place a year ago with little documentation My goal is to move a DVR device for CCTV system away from the PoS machine because the DVR requires a port open which is not good for PCI compliance if both are behind same router I apologize for ignorance or lack of any details you might need to help me if there s some info I need to dig up I d be happy + to How modem routers multiple use bridged to find it I m in a rough spot trying to fix this This is how they are set up They How to use bridged modem + multiple routers have a bridged modem which is the first thing that the DSL line comes into My impression is that the proper way to use multiple routers with a bridged modem is to have a quot main router quot which will be the director if you will All the other routers should then plug into that main router as opposed to having multiple routers plugged into a bridged modem I ve confirmed that for whatever reason TWO Linksys Firewall Routers are plugged into this bridged modem which is a Netopia Again I apologize but I don t have the model numbers This brings me to my first couple of questions If two routers are plugged into the same bridged modem how would they behave Wouldn t they be fighting for control to be the quot main router quot Is it possible to set up two routers to connect to the same modem if some advanced configuration is made I actually would like to AVOID using a main router with the other routers connected to that if possible One of the routers has desktop PC and a Point of Sale system connected to it Router A if you will the other has some IP phones connected to it Router B Router B always times out when I try to access the console and I ve been told that in order to fix that I need to reset the router The problem is I can t afford to lose all those settings because I don t know how the company who installed IP phones configured that one The reason I mention this is to further stress that I don t want to have to reconfigure the existing routers However even though it times out when I try to access console it will assign me an IP properly I don t know what that really means I made sure to double check the gateway IP for that router is correctly typed into web browser At the moment the routers seem to be somehow working fine even though they are both plugged into a single bridged modem What I would like to do is add a third router that will only have the DVR device plugged into it My guess is that since Router B does have connectivity it gives me an IP and I can connect to internet when plugged into it I should set up this third router Router C plugged into router B and go ahead to configure Router C however is necessary for the DVR to function correct Give Router C a different gateway than the others forward the port that the DVR needs etc Is this a viable solution Some of my concern is that I m getting mixed messages from AT amp T technicians I have talked to Supposedly when there are routers connected to a bridge at least one of them need to have the PPPoE Username Password johndoe att net entered on it In a situation like this does router A and B BOTH need to have PPPoE user pass entered What about Router C Since router C is plugged into router B does that eliminate the need to enter PPPoE info Is it possible to only use the routers in static mode as opposed to PPPoE with user pass For example I just enter the primary and secondary DNS which the ISP uses give all the devices a WAN IP using the block of fixed IPs the ISP gives us Will that eliminate the need to use PPPoE mode with user pass And finally my last question would be In getting this DVR set up on Router C should I just go ahead to connect it to Router B and try using Router C in static mode with all the right numbers or go ahead to use the... Read more

A:How to use bridged modem + multiple routers

One thing I noticed from reading your post was that the problem you are trying to solve (not having the port opened to the DVR on the same network as the PoS) would not be solved by placing router C behind router B. You would still have to open the port on router B to allow it to pass to router C. Wouldn't this be the same as opening the port in router B to allow it to pass to the DVR (if the DVR was connected to router B)?

As far as the issues with AT&T, you can only program the IP addresses that they assign to you in the routers. They should be able to tell you how many IP addresses are assigned to your customer. If you have a router behind another router, only the one connected to the modem would have an IP address from the ISP.
 

http://www.techspot.com/community/topics/how-to-use-bridged-modem-multiple-routers.161057/
Relevancy 22.36%

I m not even sure where to start Well Gabriel the ArchAngel runs XP professional SP and is comprised of a month old CPU Motherboard PSU and primary HDD The RAM DVD-RW k dial-up modem secondary HHD monitor PS mouse and tower are from KITT and are months old The PS keyboard is years old as I prefer the USA layout over ABNT-II The parts are new because even though KITT was only month old I had the CPU PSU and motherboard fail I think they had failed so young because of my house power and I had not cleaned the Multiple problems intermittent computer during the month warranty as you have to break the warranty seal to clean inside and a few days before it died I had cleaned it - Multiple intermittent problems it was filthy - and forgot the thermal paste Multiple intermittent problems My original power stabilizer had had the grounding prong removed to fit in the wall socket house is Multiple intermittent problems not grounded electrically So when I bought the new parts I upgraded the stabilizer to a electronic line protector that is specifically made for houses that aren t grounded I also upgraded the HDD to replace two IDE drives that were and years old and I had heard noises once in a while for a month which I though was one of them failing but in hind sight may have been the CPU or PSU fan making noise I DO leave the computer on all night to download via my slow k dial-up modem and rarely reboot Usually that only happens when the power goes out once a month or twice a week depending on the time of year Now after just months I m getting some weird things happening After the first power outage - less then two weeks after I got the thing running - it wouldn t output to monitor I had feared I had lost the monitor as well but a third attempt the monitor worked but the HDD s wouldn t register in POST Waited more then minutes and it booted fine Tech said the PSU may have humidity problems and is common here which makes sense since I live meters from the beach and Clark Kent my original US bought Compaq had similar problems for years before he died though he took his second monitor with him Then the next power outage happened and after boot it would go from grey classic view my setting to the blue XP style I didn t make much of it since I thought my settings may not have been saved though the start menu classic setting remained This happens out of three times the power goes The dial-up modem has been lost three times I had to remove the card boot remove the driver boot shutdown cool down replace the card boot then reinstall the driver to get it back At one point I noticed the secondary HHD was having problems It would revert to PIO At one point the mft was corrupted both and I used testdisk to recover the files and reformatted Suspecting that it is failing was damaged when KITT bought the farm I have since used it for minimal storage and have not used it like normal I will copy the video file to the main drive to watch it instead of access the file directly from the HDD for the entire hour or so I noticed a couple lock ups but a reboot fixed them There was also some freaky stuff going with the front audio output I get quot half quot sound Musical instruments and movie background noise worked but vocal talking was very low I could only hear it all if I set the balance to one side L R didn t matter The mono sound came out both speakers ears And sometimes he won t turn off the monitor at the appropriate time if set in power options unless I change the wallpaper I have energy saver disabled in BIOS The past week however I ve had problems with no signal to monitor no keyboard lights blink artifacts I opened it up reseated the front audio wire which fixed my balance problem noticed the south bridge is hot but it has a way smaller heatsink than the northbridge and installed newer intel graphic driver I had artifacts one more time even after the driver install but the second reboot seems to have fixed things A day later I had audio video stutter ... Read more

A:Multiple intermittent problems

First, invest in a good battery backup line conditioning uninterruptible power supply (UPS). Second, each power outage can damage any part of a computer. Some of this damage is immediate, some causes damage over time. The motherboard's bios gets confused or corrupted. hard drive data and the operating system becomes corrupted...

You may be in for another motherboard or power supply change in this case. You will continue to have these problems until you take action to protect the computer and to turn it off and unplug it when you are not using it, until you can get that UPS up and running
 

http://www.techspot.com/community/topics/multiple-intermittent-problems.159264/
Relevancy 21.5%

I ve been doing a bit multiple PSU's when GPUs Adding running additional of research lately because I m unsure of the exact upgrade direction I want to take and I ve come up with the idea of using full HD screens along with triple SLI CF but the power requirements in my case would be above the capability of my Corsair HX- Having just spent on that I d rather not even consider replacing it So can a system use a second PSU like any decent PSU or do they need Adding additional PSU's when running multiple GPUs to be built specially for the purpose I was kinda thinking maybe it would be possible to run the system on my Corsair including x GPUs and then run the rd th using another PSU Adding additional PSU's when running multiple GPUs like a w modular thus only using a couple of cables OCZ one or something Besides the space requirements how exactly do you go about doing this e g how would you connect it into the motherboard and is it physically possible Do I need to use a booster thingy PSU like the ones Red uses in his hollodeck instead If so where on earth do you purchase them from in the UK and what are they called Its purely discussion right now I m not tying myself down to any particular idea I d just like to understand all my available paths and answer a couple of questions I m unsure about more than anything nbsp

A:Adding additional PSU's when running multiple GPUs

Leeky said:





Having just spent £117 on that I'd rather not even consider replacing it. So can a system use a second PSU (like any decent PSU), or do they need to be built specially for the purpose?Click to expand...

I'm no expert in PSU's so I wont bull**** you on that, it's my weak spot, but is it possible to use multiple PSU's on one system? Yes. Both in your case? I don't know.
 

http://www.techspot.com/community/topics/adding-additional-psus-when-running-multiple-gpus.157864/
Relevancy 22.36%

Ok so my friends like coming to my place and bring their xbox s and play online together Problem is is that when we all usually or more of us try to play online at the same time joining together then getting in lobbies usually only of us can stay connected to x box live When a couple of us do manage to stay online one of us lags pretty bad We used to have similar problems when we all played on computers too when it was of us it was usually ok but when a th person was online playing things got pretty slow Im using a belkin wireless G router Ghz Multiple bad connection Xboxs, Is it because its not the best router in the world and too many people are playing off the one router Let me know if I should get a new router or what the problem is id like to start having more people over and doing large xbox parties but I cant if we cant get on the internet Also I dont think its because of my internet its self because when im home with just my family we connect Multiple Xboxs, bad connection to xbox live and internet through our computers quickly Thanks let me know nbsp

A:Multiple Xboxs, bad connection

Im thinking i may need a lan switch or whatever? if so can you link some good ones that are cheap?
 

http://www.techspot.com/community/topics/multiple-xboxs-bad-connection.156942/
Relevancy 22.36%

Right this is a bit Multiple problems PC of a wail for help as i am Multiple PC problems building a pc for someone and i am majorly not getting anywhere It was supposed to be a straight swap of my old computer to a new case I decided to get a faster processor supposedly easy enough Anyway during transit the motherboard was fried apparently and now i have found myself having to replace most of the bits I m having multiple problems with the darn thing now Firstly i can t seem to put anything in any of the pci slots as then the pc will load to windows then say windows explorer has encountered a problem and freeze So for the moment i ve resorted to having no extra cards in the case apart from the gpu It wasnt even coming up with an image for ages either until last night when i did something and the image appeared on the monitor celebration So i decided to try and do some more work on it today and now the blasted thing has returned to not showing an image but not bringing up the no signal message either Im stumped Any quick suggestions on what might be the problem Thanks in advance nbsp

A:Multiple PC problems

Is this the same problem as described in this thread?: http://www.techspot.com/vb/topic155194.html#post946964
 

http://www.techspot.com/community/topics/multiple-pc-problems.156268/
Relevancy 22.36%

Hello All,
I have two printers that I like to dedicate one of them to print a form that I have in form of PDF, ow can i make that my only printer that would print that one page all the time.
thank you very much .
JON
 

http://www.techspot.com/community/topics/printer-multiple-programs.154712/
Relevancy 21.07%

Hi Im trying to improve my home network Currently I have the modem and wireless router setup in my basement with one computer hardwired to the router and multiple laptops spread throughout the house However the laptops at the top of my house do not have good signal My house is wired with ethernet cabling throughout the house and walls to help or Routers Points Access Need with multiple network home setup What Need help to setup home network with multiple Access Points or Routers I want to do is to take advantage of this wiring and setup multiple routers or AP s throughout house not sure about difference Also to even allow some laptops to connect with an ethernet cable rather than wireless I am not sure how to do this currently All the ethernet cableing Need help to setup home network with multiple Access Points or Routers converge in my garage as an unfinished mess see pic I wanted to run a cable from my router to a plug in the wall which would take the signal to my garage I would then need some kind of device like a hub or switch but i am not sure what kind of device I was hoping it would then distribute the signal to the other wires and send it throuought the house I then wanted to connect another device that would like another router or AP in a another part of the house but am unsure what kind of device and how to do so If anyone could help me out it would be much appreciated nbsp

A:Need help to setup home network with multiple Access Points or Routers

With Ethernet wiring available you have some nice choices;
use wires to access remote locations
and place wireless in the room(s) needed
Likely you can just wire to each floor and the garage and then let the wireless be accessed from those locations.

The Modem==>#1Router can control all the DHCP assignments and assuming that you only need four remote locations, you can use a 4-port router. If you need more than four, you will need a Switch, eg
Code:
modem==router---switch-- four connections
|
+---- three more connections
Each port from the router is wired to an Access Point or a WiFi router (doesn't matter so use whatever you have). The trick is
disable the dhcp in each Wifi device
attached the ethernet from #1Router to any LAN slot on the WiFi (leaving its Wan slot empty)
This will place all the WiFi on the same subnet as #1 router and sharing et al works across the board

WiFi setups:
start with just one to get the setup running and then you can use that as a template to
config the others. When performing this task, ALWAYS connect a pc to the Wifi device with a cable!

a) change the SSID to something unique to you but not obviously name, address ,,, (
you could add a suffix to it to identify one from the other

b) set a unique channel on each WiFi router to reduce interferrence.
(if you're using a DSL service, then make sure all phones in the house have a new filter attached)

c) enable encryption (WPA2 or WPA in that order) and set the passphrase (can be the same for all wifi devices)

d) for heaven's sake, change the admin password and save it.
(this will disconnect your PC from the device being configure so don't be shocked)

disconnect from the Wifi device and attempt a wireless connection.
Once this works, you can repeat for each of the others.
 

http://www.techspot.com/community/topics/need-help-to-setup-home-network-with-multiple-access-points-or-routers.154687/
Relevancy 21.5%

This is the strangest error I have EVER seen in XP. I find no mention of this phenomenon anywhere on the web so perhaps I am the first? I surely hope not.

I have a Dell laptop with an integrated keyboard (i.e. built-in). Suddenly, and with no good reason, today my keyboard is acting strangely. Some letters I have to hit 3 times before they type. Others twice. And yet others behave as normal. The correct letter will eventually appear but my Lord no one should have to hit any character on the keyboard more than once.

I need this fixed ASAP because I am taking this PC out of the country with me and I have to be productive.

Help!!!!!!!!!!!!!!!!
 

A:Windows XP - Keyboard - some letters I have to type multiple times for them to appear

Laptop keyboard problem

This could be a failing keyboard matrix, fairly simple to order a new one from Dell and fit. Or it could be the keyboard software faulty. A way to check for a failing keyboard, is to plug in a separate keyboard, into a USB socket. If all works well, then the fault is the Laptop's keyboard. Hope that helps, if only to eliminate one possible problem.
 

http://www.techspot.com/community/topics/windows-xp-keyboard-some-letters-i-have-to-type-multiple-times-for-them-to-appear.153692/
Relevancy 22.36%

I don t do a lot of audio stuff with Win but I would like to know this My MB a LanParty board has built-in audio I typically have audio feeds out of it at once - push audio news seminar room audio and maybe some music I understand I can mix these at the sound control panel and I do However I would like to be able to send or of these sources through a separate audio card and to separate amplified speakers Can I do this under Win and say have audio feeds and go out through my LanParty onboard audio to one set of amplified speakers and then send sources and to say a PCI-based or USB-based audio dongle connected to a second pair of speakers Sound quality is NOT an issue These are voice quality for the most part being used in a work setting I appreciate all responses except quot Why quot ones I sound do I can Win 7 64-bit & that? cards - multiple want to because it s Win 7 64-bit & multiple sound cards - can I do that? my first choice of how I want to handle my sounds So please don t ask me quot Why would you want to do that when you can use the Win mixer and a single sound card quot or quot Why are you trying to listen to sources at once quot I just want to know if I can do that and if so how do I assign a sound from a source such as Hotcomm or Citrix GoTo or Adobe Connect to a specific card nbsp

http://www.techspot.com/community/topics/win-7-64-bit-multiple-sound-cards-can-i-do-that.151998/
Relevancy 21.93%

i have an asus g50v vista 64 bit About 15 of the keys produce multiple characters for ex, 'a' produces sda and spacebar produces z0 etc, Device Manager is showing 4 entries under keyboard; 1. keyboard device filter 2.microsoft ehome mcir109 keyboard 3.MS ehome mcir keyboard and 4.MS ehome remote control keyboard keys Any help appreciated Thanx Larry

Remove all the keyboard entries in the device manager and reboot, letting Windows reinstall the keyboard driver...[advice from forum]

i posted the above problem a year ago and removed keyboard entries in device manager,as advised here....it worked nicely,,,,exact same problem happening again but removing devices and reboot is doing nothing this time......also my system restore willnot restore..... please help thanx Larry
 

A:Keyboard multiple characters with 1 keystroke

If you haven't already, can you try another keyboard?
 

http://www.techspot.com/community/topics/keyboard-multiple-characters-with-1-keystroke.151222/
Relevancy 21.5%

my laptop keyboard is on the fritz. when i push the 'w' key wi appears on the screen my space bar has turned into my enter key my z key is now a 'za' key and my up arrow key is now my right arrow key and so on. i reinstalled the drivers and tried reinstalling the bios, i removed all power sources and even went out and purchased a new antivirus program thinking it was a virus but i'm officially stumped. please, please help, before i'm forced to take a sledge hammer to my problem;-)
 

A:Keyboard issues, multiple letters appearing

You didn't give us the brand and model, but a laptop keyboard can be found for $25 to $50 depending on brand and model and where you buy it... Usully you remove four to six screws from the bottom, unplug the ribbon cable, remove the board and exchange it, then reverse and you have the new keyboard working in less than 15 minutes...
Finding the right keyboard is tricky, but eBay usually has every model available or with a gurgle search
 

http://www.techspot.com/community/topics/keyboard-issues-multiple-letters-appearing.150843/
Relevancy 21.5%

Hello For a long time I have used a multiple monitor with a hdmi cable A TV in my room so i can watch cable Multiple problem with monitor HDMI movies from my computer on the TV I also set the TV-monitor to default sound device Multiple monitor problem with HDMI cable so the sound would come from the TV and not the PC speakers Suddenly it just stopped working So i first tried changing the hdmi cable without any luck - then i tried connecting my xbox to the TV to check if the input to the tv was broken but it worked perfectly - then i tried connecting the pc to my pc screen with hdmi Multiple monitor problem with HDMI cable to see if the hdmi output Multiple monitor problem with HDMI cable was broken this worked perfectly - then i got a new TV and it worked ok but with minor problems there are problems When i only have the desktop showing the screen is perfectly still but when i watch a movie there is a little flickering on the screen When using the tv as default playback device for sound it goes on it of for example when listening to music the music plays for seconds then stops for a second or two then repeat Anyone know what the problem might be some settings probably i kinda spend most of my spare time watching film on the tv but this problem keeps stopping me - hope someone has a good answer for me and please write in a language i understand im not a computer expert nbsp

http://www.techspot.com/community/topics/multiple-monitor-problem-with-hdmi-cable.150472/
Relevancy 21.5%

OS: Windows XP Pro

I have 3 hard drives all 80GB, two are from Western Dig and one is a Maxtor and 1 DVD attached as follows.

Primary IDE channel with the 80 wire cable set up:

Drive #1 (OS drive) - jumper on Master w Slave Present, end cable location, assigned to C:
Drive #2 (data drive) - jumper on Slave, middle cable location, assigned to D:

Secondary IDE channel with 40 wire cable set up:

Drive #3 (DVD) - jumper on Slave, end cable location, assigned to F:
Drive #4 (data drive) - jumper on Master w Slave Present, middle cable location, assigned to E: and G:

I don't know why the same drive #4 gets assigned to two letters E and G???

How to fix so it is only assigned to one letter???

I am taking my setup info from: www.mikeshardware.com in the how to connect IDE drives section
 

A:Multiple hard drives show up in Explorer

The only question that springs to mind is, "is there a partition on the drive"?
 

http://www.techspot.com/community/topics/multiple-hard-drives-show-up-in-explorer.149348/
Relevancy 21.07%

I m looking for a little help if someone would be so kind because I m a bit out of my setup network? - real router, server boxes multiple multipe IPs, One normal depth with this I m putting together a small home network well I guess large compared to some where I have three desktops connected to my router by wireless I also have a CentOS Apache ISPConfig server box and a WinServer k IIS server One router, multipe real IPs, multiple server boxes - setup network? box My intention is to connect both of these servers to the router in such a way that each has One router, multipe real IPs, multiple server boxes - setup network? it s own real IP Registered domain names would then be pointed at either the IP of One router, multipe real IPs, multiple server boxes - setup network? the Apache server or the IIS server and so the router would deliver the traffic to the appropriate box according to which IP the domain is pointed at To those ends I ve purchased a block of IP addresses from my ISP Having just called them I ve been instructed that the IP block I ve bought are my internal IP addresses and that once I ve set them up on the router in this way they should work I ve never actually done this before and my networking experience doesn t really stretch past the very basics of home networking and so I have very little idea of what kind of options I need to use to set this up on the router - there are things in there that are more advanced than I understand Could anybody please point me in the right direction nbsp

A:One router, multipe real IPs, multiple server boxes - setup network?

Regular SOHO routers such as a linksys will not let you manage multiple static IP's. You will need an enterprise class VPN/firewall/router such as a Sonicwall to do that. I assume you want one IP for your web server, one for FTP and so on.. all pointing to different servers/nics. I would suggest a Sonicwall Pro 2040 or Pro 3060. I've seen both on ebay (used) for a reasonable price (around $300). Keep in mind these boxes go for about $1500 to $2000 and up (retail). There are other products from other vendors such as Cisco which will be significantly more. You will need a router in bridge mode (or a bridge) between your WAN connection and the Sonicwall. A regular linksys may suffice for this. There may be other solutions to this but this is one.
 

http://www.techspot.com/community/topics/one-router-multipe-real-ips-multiple-server-boxes-setup-network.148979/
Relevancy 22.36%

Hi,

I am trying to set up my Gateway DX4300-19 Desktop PC for dual monitors. The problem I am having is that the second monitor is not accepting the signal and or not getting the signal. I am not very tech savvy so I may be completely wrong with this so here it goes:

My video card is a ATI Radeon HD 3200 integrated.

So this is how I'm trying to set it up and if I'm completely wrong please tell me what to do.

On the back panel of my desktop there is a VGA output and a HDMI output. I have the VGA going to my desktop Monitor its a gateway.

And Im trying to use the HDMI into my LCD TV as it is hung above my desktop anyway.

Am I doing something wrong or will it just not work?
 

http://www.techspot.com/community/topics/help-with-multiple-monitor-setup.147900/
Relevancy 22.36%

We have Internet service from two providers Fios Comcast Each service includes -Static IP address xxx xxx xxx - yyy yyy yyy - Which connect to our internal LAN xxx I would like to segregate traffic between services so that that Email Static Using IP's Multiple traffic is on a different IP from users accessing the Internet I would also like to have fail-over from the primary fios to secondary comcast I don t need load balancing the Fios connection is plenty fast My plan is to take a -port switch and plug the two Ethernet connections coming from the providers into it From there I ll attach Watchguard Dual WAN Firewall Users accessing the Internet WAN Gateway xxx xxxx xxx WAN Gateway yyy Using Multiple Static IP's yyy yyy Internal configured with fail-over from WAN to from WAN Fios Supplied Router or suitable replacement Email Server Gateway xxx xxx xxx for Email Internal Comcast Supplied Router or suitable replacement Email Server fail-over set in DNS and on the server Gateway yyy yyy yyy Internal My first question is will this work Normally you would have the Internet connection from the provider going Using Multiple Static IP's directly into the router Can I put a switch in between them If so can I attach two Internet connections and three routers all to the same switch Thanks nbsp

A:Using Multiple Static IP's

Scamper said:





We have Internet service from two providers (Fios/Comcast)
Each service includes 5-Static IP address:
xxx.xxx.xxx.10 - 14 (ISP#1 ->router#1)
yyy.yyy.yyy.100-104 (ISP#2 ->router#2)

Which connect to our internal LAN:
192.168.1.xxx

I would like to segregate traffic between services, so that that Email traffic is on a different IP from users accessing the Internet.Click to expand...

This is a port forward solution:
for ports 25, 110, & 143 (the emails), port forward each to the lan address that is closes to the specific ISP side desired, eg any lan address on router#2




I would also like to have fail-over from the primary (fios) to secondary (comcast)
(I don't need load balancing, the Fios connection is plenty fast)Click to expand...

fall over is described well here

you may need to multihome each client (which see)




My plan is to take a 16-port switch and plug the two Ethernet connections coming from the providers into it. .....

My first question is, will this work? Normally you would have the Internet connection from the provider going directly into the router.

Can I put a switch in between them?

If so can I attach two Internet connections and three routers all to the same switch?Click to expand...

I'd have to think out the layout and setup ...
 

http://www.techspot.com/community/topics/using-multiple-static-ips.147715/
Relevancy 22.36%

Ok here we go I apologize if I don t give enough info needed to diagnose the problem but I m only a novice It all started when my avast antivirus found a No connection multiple on networks worm coming from system drivers AFD sys I couldn t quarantine the file so No connection on multiple networks I cut it and moved it to another folder Upon restart I have quot limited or No connection on multiple networks no connectivity quot I tried putting the file back but that didn t change anything I m pretty sure this isn t a router issue I have a wired connection running to my router and I also have a wireless card with access to my neighbors unsecured networks No dice on any of them My IP address comes up as When I try to renew it says quot error ocurred RPC server is unavailable quot I also can t start my dhcp client it gives me quot erroe the dependency service does not exist or has been marked for deletion quot The dependency services listed are the normal recommended in most fixes Does anyone have any advice I have XP SP by the way nbsp

http://www.techspot.com/community/topics/no-connection-on-multiple-networks.146130/
Relevancy 21.5%

I have an existing network with Verizon FiOS that has the router built in to the modem We have computers hooked to that network wired wireless I have a server machine that I am using to practice for my MS certification exams I have Windows Server installed It is an Active Directory domain controller with DNS and DHCP multiple routers, clients 1 with 2 server, Network I also have an old laptop with XP Pro Neither of these are on our existing network My goal Network with 2 routers, 1 server, multiple clients is to connect these machines to another router with wireless capabilities turned off and then connect this router to the existing one to provide internet access to the new machines I want the server to operate as DNS and Network with 2 routers, 1 server, multiple clients DHCP I do not want the router s to do it So the existing router FiOS has an IP of and it gives IP s to the machines connected to it This is fine but when I connect the server and XP machines to the new router I want the server to give out IP addresses not the router I also want to be able to join the XP machine to the AD Domain on the server so I can start playing with RIS and assigning permissions and all the other stuff I Network with 2 routers, 1 server, multiple clients need to learn for my exams Existing router Actiontec MI -WR New router Netgear WGR v All computers are XP Pro except for the server and one Windows Ultimate laptop Does anyone know how to do this and make everything work correctly I hope I ve given enough information Thanks in advance for any help nbsp

A:Network with 2 routers, 1 server, multiple clients

You can have domain running in the home with the equipment you have posted above. I did that here myself. You need Windows client OS that supports domain. Pro series does. Server 2003 has NAT feature and can be your router using additional network card. One Card would be labeled WAN and the other would be called LAN. This can be connected to a 5/8/16/24/48-port switch or even add AP to the mix. So it would be modem to Server to external switch. Having the Server with DNS, DHCP and Active Directory active plus the NAT works great. Take some time to get it all working though. For extra SPI hardware firewall I had use one of those belkin wireless turned off wi-fi, DHCP then connected the server LAN to Belkin then back to the switch. This is optional don't have to do this just saying that's how I did it.

Or

Use a wireless router connect only server to and use external switch from the router to your other network devices. This is another way to do with on domain. Doing this way you don't need to install another Nic card in the server box.
 

http://www.techspot.com/community/topics/network-with-2-routers-1-server-multiple-clients.145914/
Relevancy 24.08%

Hey there everyone! I'm pretty new to this forum but i really need your help.

Earlier today i experience 2 different BSOD erros at different times, and for no apparent reason.

I'm not sure what the reason is for either of them since i just reformatted earlier today. I have the dump file for each of the BSODs. It is attached.

Could anyone possibly tell me what the problem could be? Thanks in advance
 

A:BSODs - (driver is mismanaging system PTEs, page fault in non-paged area)

nothing attached.
 

http://www.techspot.com/community/topics/bsods-driver-is-mismanaging-system-ptes-page-fault-in-non-paged-area.144785/
Relevancy 21.5%

I have Linksys wireless-G broadband router. When surfing the web, while being the only one online at home, internet pages will open almost instantaneous. The pc that i use is directly connected to the router. There is also another pc as well as 2 laptops that connect wirelessly. The internet signal strength is reduced drastically when multiple users are online at the same time. My router is keyed/pass protected and additional unauthorized users is not a problem. I have no idea what kind of signal the router is putting out. I have noticed when playing an online game my latency will go from <100ms and shoot as high as 1.2k-2k. Again ive noticed that latency is high when multiple people are online.

What can i do to troubleshoot this? Is there any way that i can get the signal to boost as more of it is utilized? thx
 

A:Experiencing high latency with multiple users on router

Is there any way that i can get the signal to boost as more of it is utilized?Click to expand...

the short answer is no.

for a start see http://www.techspot.com/vb/topic141987.html#4

Bandwidth control is difficult with our cheap routers -- the professionals have features
that are seldomly available to home users. Look to see if QoS is supported in your router; if present you *may*
be able to configure it.

You currently have
Code:

modem ---- router#1 ---wired system(A)
|
+ - - - - WiFi (B + C systems)

With that layout, all systems will see all traffic ; system A will see but not process packets from system C.
Not all routers use Switch technology -- see if yours does. If not add a switch
Code:

modem ---- router#1 ---(switch*) --- wired system(A)
|
+ - - - - WiFi (B + C systems)

This will reduce traffic from the router to system(A). Everything attached to the
switch* side will only see its own traffic.

If I were using WiFi, this would be my layout
Code:

modem ---- router#1 ---(switch) --- A/P - - - WiFi (B + C systems) wired system(A)
|
+---- wired system(A)

Here, ALL systems only see their own traffic

In all cases, router#1 provides the initial NAT to allow multiple systems to share the single ISP connection.
 

http://www.techspot.com/community/topics/experiencing-high-latency-with-multiple-users-on-router.142388/
Relevancy 21.5%

I have two monitors, and want to play the same game on both simultaneously, and do so without having both monitors show the same image, but rather to have the game be spread out across the two.

Any suggestions on how i could do this, please do not hesitate to send the information my way.

Thank you,
 

http://www.techspot.com/community/topics/how-to-play-a-game-spread-out-across-multiple-monitors.140289/
Relevancy 21.93%

I am hoping you guys can help me out here I have been looking at a pc I built for someone it had two matrox Graphics problem Multiple card graphics cards connected to monitors and was working well for a couple of years the spec Multiple Graphics card problem is basically Athlon Multiple Graphics card problem x processor ASUS M V mobo GB memory and was running Windows XP We recently upgraded to Windows bit and have since had problemswith the graphics and the machine freezing After several e-mails with Matrox it seems that the cards we have are no longer supported and Win drivers are not available they suggested upgrading to their latest cards but at a cost of about I looked around and decided that we may be able to use graphics cards of the same type one being PCIex and the other being PCI I bought Geforce GS cards and fitted them this morning the first two went OK and everything worked fine but problems occurred after the third one with problems with freezing and running slow I updated to the latest drivers which at least enabled the pc to boot up fine but still it seems to be slowly and freezing particularly if we try to open several things at once We have ordered some more memory thinking that it may just be running slow with the extra cards but I am not totally convinced that that will cure the problem Have you guys any thoughts nbsp

A:Multiple Graphics card problem

I suspect that W7 is the culprit here and the issue of drivers where it starts. I have had problems with mixing the slots with the same sorts of cards so if you have two 8400GS cards in PCI slots, perhaps try something else in the PCI-e slot?
Adding memory is always a good idea but not part of this fix I think!
 

http://www.techspot.com/community/topics/multiple-graphics-card-problem.139848/
Relevancy 22.36%

How can i have more than 2 Monitor plugged into my desktop , i have seen lots of people do that and wonder how ?
 

A:Multiple Monitors

A video card with two outputs is one method. What's your existing hardware?
 

http://www.techspot.com/community/topics/multiple-monitors.139622/
Relevancy 25.8%

I tried to find the link to introduce myself, and couldnt. I am not very technically advanced. My laptop (its an older one with windows xp operating system home) (my new one was stolen and I am quite depressed about it) now this problem.
I am using my sons laptop now.

I do not have any discs but blank ones. Can someone halp me? My computer will not start, it just displays that message, and when i press f8, safe mode and everything comes up but it never does anything
 

A:Compaq 2700 <Windows root>\system32\ntoskrnl. exe is missing or corrupt

The hard drive (boot drive) is bad or its contents are corrupted. With no discs, you might want to take it to a friend or to a repair shop to have it repaired
 

http://www.techspot.com/community/topics/compaq-2700-windows-root-system32-ntoskrnl-exe-is-missing-or-corrupt.137562/
Relevancy 21.93%

Hi guys I m new here looks a great forum Hope I can be multiple compatible with p35/g33 Intel monitors? of assistance but right now I need some of my own Intel p35/g33 compatible with multiple monitors? I am running dual monitors on an ATI Radeon and have recently purchased an Nvidia quadro fx to run another monitors So i found out I am having compatability issues as Intel p35/g33 compatible with multiple monitors? the new card is only running x resolution and bit colour it will not allow me to change this My ATI controller now won t Intel p35/g33 compatible with multiple monitors? let me adjust my first monitors and does not pick up the third My chipset is the - intel p g - If i purchase another ATI Radeon will this solve my problem is this chipset capable of running monitors well it s running now one on the nvidia with low colour and res so i m sure it can Will I need to upgrade my power supply Am I damaging the PC if not My board is a Asus P KC if that helps Thanks James nbsp

A:Intel p35/g33 compatible with multiple monitors?

Welcome James,
I would recommend not mixing multiple video cards, so installing another Radeon 7000 is a good idea. Besides, only one video driver would be needed
 

http://www.techspot.com/community/topics/intel-p35-g33-compatible-with-multiple-monitors.137538/
Relevancy 21.5%

Hey everyone,
I have a keyboard (Razer Tarantula) that plugs in via USB. The primary problem I have is that during boot up, my computer does not recognize the keyboard. I believe this is because it plugs in via USB (correct me if I'm wrong). If this is the case, in order for my computer to recognize it, I think I would need to buy an adapter so that I can plug it into the traditional keyboard socket (I forget what it's called).

If I buy/use an adapter, will that have any effect on the functionality of the extra/programmable keys.

Thanks for any insight!
 

A:Question about USB keyboards with multiple extra key functions

Do you mean your computer doesn't recognize USB until the Windows is running?

If that's the case, then you need to check your BIOS settings. There should be an option to enable USB Legacy Support. This tells your BIOS to support USB until Windows starts.

Now you have the chicken/egg situation as you need to get to the BIOS to change the setting! So either buy an adapter (still useful to have for a couple bucks) or borrow a non-USB keyboard so you can change the setting
 

http://www.techspot.com/community/topics/question-about-usb-keyboards-with-multiple-extra-key-functions.136624/
Relevancy 21.5%

I have the ASUS M N-E SLI mobo I m using the built-in ethernet plug wired into my router Lately what s been happening is when I turn on the computer the internet won t work I have to right click the network icon in the system tray click network and sharing center click manage network connections right click the one device listed NVIDIA nForce Mbps Ethernet and click properties Then I click configure drivers update drivers and I have to manually install one of the drivers listed One is from Mirosoft and the other from nvidia They are both named NVIDIA nForce Networking Controller Either one works I could install the microsoft one or the nvidia one and they ll both make the internet work but as soon as I restart my computer it does the same thing again What I d like to know is why causing conflict network Multiple issues? drivers it s doing this and if there s a way to remove one or the other of the drivers from my computer My idea is that it doesn t know which driver to use when the computer turns on so it doesn t use either one If I can remove the microsoft one I think it d use the nvidia one Can someone PLEASE help me out it s really becoming annoying Thank you nbsp

http://www.techspot.com/community/topics/multiple-network-drivers-causing-conflict-issues.135534/
Relevancy 21.93%

Forgive me if this has been asked, I didn't look very hard. :rolleyes:

I have two computers, of which both have a Wireless G card and a Wired gigabit connection. Currently they are both on a wireless G 10/100 Netgear router and moving large files between the two via wireless is painful at best.

My question is, would it be possible to connect the two computers via a Cat6 crossover cable or a 10/100/1000 switch while, keeping the wireless connection for internet access? I have a sneaking suspicion that I can't, but I'm not that good with networking so I wouldn't know. :rolleyes:
 

A:Question about multiple network connections

madboyv1 said:





Forgive me if this has been asked, I didn't look very hard. :rolleyes:

I have two computers, of which both have a Wireless G card and a Wired gigabit connection. Currently they are both on a wireless G 10/100 Netgear router and moving large files between the two via wireless is painful at best.

My question is, would it be possible to connect the two computers via a Cat6 crossover cable or a 10/100/1000 switch while, keeping the wireless connection for internet access? I have a sneaking suspicion that I can't, but I'm not that good with networking so I wouldn't know. :rolleyes:Click to expand...

You don't need a gig router to move gig data from one gig to another gig. Just need a gig switch and either gig PCI, gig PCI-E or GIG PCMICA 32-bit card. But remember G is only 30mbps as N would be more like 120mbps.Wireless will be slower to transfer large files. Newer routers have larger memory packet data buffers some have 832kb for gig switch internal inside the router some have less than 96KB. Gig switches have 64, 128, 144 and all the way up to ((4MB for packet buffers (these are 24/48 ports)).

How large of a file your transferring? I do large files over Gig to Gig daily Stream Media over 100mbps daily. One more tip whatever you do don't put 100mbps devices on a gig switch. You can connect the router if it's a 10/100 to the gig switch that's okay. But if you got slower devices don't do it.
 

http://www.techspot.com/community/topics/question-about-multiple-network-connections.131791/
Relevancy 45.58%

months of Multiple BSODs on a or computer BSODs Multiple 5 a - error? of on hardware new brand driver months brand new computer - driver or hardware error Mini dump 5 months of Multiple BSODs on a brand new computer - driver or hardware error? analysis help please Hi I m looking for anyone who can analyse mini dumps and help me determine the source of my problems The system has been giving me hell from the start The problem often manifests in different driver and memory errors - To my level of understanding the errors seem to be fairly unrelated When it runs well it s awesome and it really performs When it starts messing up that s it it might BSOD on every start up times in a row and then start working for no apparent reason I ruled out faulty PSU and faulty RAM and system always runs cool the hottest component being the fanless graphics card I have also run extensive tests on system hard drive Seatools returned no errors after firmware upgrade and long tests However DiskCheckup keeps changing its mind out predicted TEC date it jumps from Jan too Aug either of which is unacceptable and well within manufacture warranty Reinstalled windows countless times with different installation CDs So that leaves MOBO CPU GPU or maybe some software of driver issue I feel that it must be hardware related but I can t work out what it is on top of that the faults are often intermittent making trial and error testing unreliable I have collected many minidumps now but I can t work out if they are related or not has my comp dozens of problems or just a couple with variegated symptoms Questions Q Can anybody help me Q How should I post minidumps and info Hard drive questions Seatools return no errors I have been told that this is the definitive test for a faulty hard drive Q PassMark DiskCheckup keeps changing its mind out predicted TEC date Does this indicate a problem with my hard drive Q When ever I run chkdsk it says that it has found errors and is repairing them Does this indicate a problem with my hard drive GPU questions Video driver has supposedly caused some of the BSODs The drag and drop mouse marks don t disappear almost as if the screen is not refreshing Q Could these be signs of a faulty graphics card Thanks a lot I m beginning to go a little bit mad from all this troubleshooting dead Jane nbsp

A:5 months of Multiple BSODs on a brand new computer - driver or hardware error?

Here are some of the older dmp analyses:
View attachment 50542



View attachment 50543



View attachment 50544



View attachment 50545



View attachment 50546
 

http://www.techspot.com/community/topics/5-months-of-multiple-bsods-on-a-brand-new-computer-driver-or-hardware-error.130950/
Relevancy 22.36%

Usually the home user has little need for two or more routers To get more connectivity one only needs to add multiple Tip: routers using a switch hub switch is preferred to the existing router and more slots become available for more systems The typical case for the home user to add a router is expanding a wired LAN and adding wireless connectivity at the same time The issue will be the configurability of both Tip: using multiple routers routers The setup will look like Code modem -- routerA ---- routerB ---b-systems ------ a-systems Which router is existing vs new really doesn t matter other than getting the configuration correct If I had my choice however the B-router would be my new wireless router for security reasons later described A wireless Access Point would also fit nicely in the router-B location CONFIGURATION Both routers will need to be configured likely hardwired at first to one of your systems You will need to access your router s configuration page which is brand-name dependent Netgear D-Link Linksys Belkin Once you ve logged into the router Tip: using multiple routers be sure to set a new admin password TWO Tip: using multiple routers parameters will determine success failure of the configuration the router s ip-address and the subnet mask of course you need the other stuff too but these determine the data flow The typical problem that can arise is the inability to set the subnet mask to a value that will work -- some vendors get parochial and force some assumption that cause problems sorry no I don t have a list Here s what needs to be created Router-A ip-address must be higher numerically than router-B eg X versus Y where X gt Y Secondly the subnet mask for router-A must allow traffic to flow down to router-B A typical subnet mask for home users would be but this would allow traffic ONLY for the router-A where the b X b value was an exact match thus dropping traffic for router-B What we need is a subnet mask more like your X value will then be thru Your vendor may not let you set a value like in the third position or if it does it might get reset when you save the configuration edit If this occurs to you you can try an alternative class-b addresses like X vs Y These addresses require a different subnet mask and the parochial rules need to be dropped -- give it try at least You also might try swapping the devices and trying the steps above again If that doesn t work either you re just SOL -- S out of luck punt and return the last device purchased Each router can still auto config its devices using DHCP Be sure to save the configuration AND restart the router Router-B needs only to meet the rule where X gt Y and may use the typical subnet mask With at least one system hardwired to each router you should now be able to a ping your ISP from all systems b ping from a-system to b-system and conversely when this works correctly the routers are ready for general use and the wireless setup can be configured for channel ssid and wap wep encryption Security Whichever router has the wireless enabled should be considered your untrusted subnet and have the firewalls configured to not allow print file sharing You can implement this on each system s firewall OR use that router s port forwarding feature to protect all system just forward ports to a non-existing system If you really need print file sharing then by all means force your devices to known IP addresses by mapping the MAC addresses of the NIC adaptor and keep a consecutive ip address set for your systems allow print file sharing ONLY for this narrow range of address in your firewalls In this case obviously you can t use the port forwarding trick above In addition your wireless router will have an SSID and allow WAP WEP encryption features You really should implement WAP or at least WEP nbsp

A:Tip: using multiple routers

how to setup wireless router to wireless router
please give me some help
 

http://www.techspot.com/community/topics/tip-using-multiple-routers.67726/
Relevancy 22.36%

I'm currently in the process of building a new pc with multiple hdds and am uncertain as to my options for which type of raid configurations are available. What i would like to do is have 1 wd velociraptor for my os and programs, 2 hdds for data (striped), and 1 hdd to mirror the three other drives. First, is this possible? Second, is this an efficient config or is there a better way?
 

A:Managing multiple hdds

1. Yes its possible, look in the manual for your motherboard, should be able to do this with most newer mobos, if you bought a prebuilt you may have to google the board.

All the things you listed above are possible, but may require a disk drive(floppy that is) or downloading files on to a flash drive to do.
 

http://www.techspot.com/community/topics/managing-multiple-hdds.129493/
Relevancy 24.94%

Hey could somebody look at my minidumps for me? I ran memtest over night with no errors, the crashes are all different I have reseated ram, removed one stick and tried in both slots then removed that stick and tried the other in both slots with the same results. nothing over clocked cleaned my case out reseated vid card and made sure all cables were snug I'm out of ideas short of buying new parts. I have no known goods to fall back on because this is my first pci-e rig. thanks
 

A:Random bsods, I upped minidumps and my belarc profile

I did not have time to sift through all your information... very complete! Thanks!
I did note, you are running XP SP3

Some of your Errors are summarized below... Suggestions at the bottom.

KERNEL_MODE_EXCEPTION_NOT_HANDLED_M (1000008e)




This is a very common bugcheck.
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at "0x%08lx" referenced memory at "0x%08lx". The memory could not be "%s".
DEFAULT_BUCKET_ID: DRIVER_FAULT
BUGCHECK_STR: 0x8E
PROCESS_NAME: GoogleUpdate.ex
IMAGE_NAME: sr.sysClick to expand...

KERNEL_MODE_EXCEPTION_NOT_HANDLED_M (1000008e)




This is a very common bugcheck.
Debugging Details: EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at "0x%08lx" referenced memory at "0x%08lx". The memory could not be "%s".
DEFAULT_BUCKET_ID: DRIVER_FAULT
BUGCHECK_STR: 0x8E
PROCESS_NAME: services.exeClick to expand...

KERNEL_MODE_EXCEPTION_NOT_HANDLED_M (1000008e)




This is a very common bugcheck.
Debugging Details: EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at "0x%08lx" referenced memory at "0x%08lx". The memory could not be "%s".
DEFAULT_BUCKET_ID: DRIVER_FAULT
BUGCHECK_STR: 0x8E
PROCESS_NAME: explorer.exe
IMAGE_NAME: win32k.sysClick to expand...

DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)




An attempt was made to access a pageable (or completely invalid) address at an interrupt request level (IRQL) that is too high. This is usually caused by drivers using improper addresses.
DEFAULT_BUCKET_ID: DRIVER_FAULT
BUGCHECK_STR: 0xD1
PROCESS_NAME: lotroclient.exe
IMAGE_NAME: ha20x2k.sysClick to expand...

BAD_POOL_HEADER (19)




The pool is already corrupt at the time of the current request. This may or may not be due to the caller. The internal pool links must be walked to figure out a possible cause of the problem, and then special pool applied to the suspect tags or the driver verifier to a suspect driver.
DEFAULT_BUCKET_ID: DRIVER_FAULT
PROCESS_NAME: pidgin.exeClick to expand...

One of your faulting processes is lotroclient.exe - a game... resource intensive.
One of your faulting processes was an IM client.
One was sr.sys ... which is system restore.
Other pointers are not very helpful (yet).

You say that
1. MEMTEST tested good.
2. nothing over clocked

Have you considered the possibility of Malware/Virus?
If you think this could be a possibility, then check...http://www.techspot.com/vb/topic58138.html.
Be sure to follow all the steps carefully.

I only looked at the most recent dumps.
Route44 or others may have additional suggestions, if I overlooked something, or if they find something in other dumps...
I will try to come back and look at this further sometime tomorrow.

Next Day - Further Review of Hardware / Software Report (Belarc)
I notice that you do have Spybot, but I am not seeing your Firewall or AV software.
These are crucial pieces for maintaining a healthy system when connected to the Web.
Unfortunately I see you are also running a Torrent (Filesharing) package. This software will open a hole through your firewall, and leave you fully exposed to whatever nasities are running on those with whom you are sharing files. This means that Filesharing programs introduce a constant threat to your security and stability. Please look at other threads here on Filesharing...

Because you are running torrent software, I would strongly recommend the 8 steps, (link noted above).
Especially since I do not see your av or firewall listed in the Belarc report.
 

http://www.techspot.com/community/topics/random-bsods-i-upped-minidumps-and-my-belarc-profile.129068/
Relevancy 25.37%

So after a long time of not posting, and still trying to figure out my BSOD's:
KERNEL STACK INPAGE ERROR
KERNEL DATA INPAGE ERROR 0X0000007A
and
A PROCESS OR CRUCIAL THREAD HAS BEEN ELIMINATED 0X0000004F

I have...
Ran several memtests (passed all multiple times)
Replaced my Corsair XMS RAM (Both 1gb sticks) (Thank you lifetime warranty)
Tried to find the errors in event viewer after almost every BSOD (no luck :[ )
Just about took a sledge hammer to my PC (usually twice a week)
And think it is perhaps a problem between my mobo (ASUS M2N SLI Deluxe), and my processor (AMD AM2 2200+)
If anyone has any ideas or knows of any other ways to narrow down BSOD error message origins, posting them would be fantastically helpful to me, thanks a ton.
 

A:Motherboard/Processor causing BSODs?

Have you tried a full clean format of your OS?
 

http://www.techspot.com/community/topics/motherboard-processor-causing-bsods.128788/
Relevancy 22.36%

Hi I got a new Inspiron laptop just a couple of days ago Its a T C D Ghz processor intel chipset with integrated graphics gb ram I had to reinstall vista after it went into Multiple BSOD a continuous loop - configuring updates shutting down confiiguring updates - after some windows updates None of the windows startup repair options worked Now after the reintall I am getting a lot of BSODs errors shown are IRQL Multiple BSOD NOT LESS OR EQUAL MEMORY MANAGEMENT REGISTRY ERROR and PAGE FAULT IN NON PAGED AREA most common being memory mgmt chkdsk shows no errors the memory test in the startup repair shows hardware errors with a msg that I need to contact the manufacturer Have updated all drivers and the bios but all that has changed is that the number of bsod instances have reduced from per hr to or Also in several instances the BSOD is preceded by services such as RPC Bluetooth wireless shutting down with the event viewer showing registry is corrupted Not sure what the problem is though have a feeling its something to do with a faulty RAM nbsp

A:Multiple BSOD

If you want to test your RAM use memtest:

1. Go to www.memtest.org and download the latest ISO version. It is free and perfectly safe.

2. Burn to a CD.

3. Place CD in your drive and reboot with CD in drive. (You might have to place your drive as first bootable in your BIOS) The test will take over.

4. Let it run for a LONG time. The rule is a minimum of 7 Passes. There are 8 individual tests per Pass. Many people will start this test before going to bed and check it the next day.

5. If you have errors you have corrupted memory and it needs to be replaced.

6. Also, with errors you need to run this test per stick of RAM. Take out one and run the test. Then take that one out and put the other in and run the test. If you start getting errors before 7 Passes you know that stick is corrupted and you don?t need to run the test any further on that stick.
 

http://www.techspot.com/community/topics/multiple-bsod.124531/
Relevancy 21.07%

ok when i run the sticks of memory in my board memtest shuts down before it can even get to if i run them single they are fine got latest drivers and bios ok i forgot to add So and many memtest bsods errors errors and my buddy told me my PSU would be fine it is a antec tru power w i am running corsair dominator x g cm x - c d motherboard is Asus m a Deluxe evga xt mb video card now when i use cpu-id it says max bandiwdth at pc - mhz i think that program may not be reading it right not sure So many errors and bsods and memtest errors because i read i can run these sticks at if i just up volt to v any idea what could be the problem this is from event viewer Event Type Error Event Source System Error Event Category Event ID Date Time AM User N A Computer HAWAII Description Error code e parameter c parameter d e parameter b ba parameter For more information see Help and Support Center at http go microsoft com fwlink events asp Data d System E f rror Er f f ror code d e Param eters c c d e c b b c a nbsp

A:So many errors and bsods and memtest errors

Try running it with one stick of memory. Do you get BSODs? Asus boards are quite well known about their pickiness about what RAN is used per board, the amount installed, and how it is configured.
 

http://www.techspot.com/community/topics/so-many-errors-and-bsods-and-memtest-errors.126139/
Relevancy 22.36%

I'm in the process of trying to reformat a Maxtor 500Gb SATA HD but I've run into a problem with there being two (2) unformatted / unassigned partitions that are eating up most of the drive. There are also 2 partitions (C & G that are approximately 80Gb each). I've tried deleting all the partitions but I can't seem to recover the disc space that's not already assigned and of course I can't do anything with the other 2 partitions. I recently had a virus that CA Suite quarantined and deleted and in the process destroyed my drive so I decided to start over. The drive is clean of all viruses and I just want to start new. Any help would be greatly appreciated. Thanks, Rob

System:
MoBo: GigaByte EP45-UD3P (rev. 1.1)
Intel® Core?2 Duo Desktop Processor
HD: Maxtor 500Gb SATA
Mem: 4 Gb DDR2
Vid: GeForce 7900GS
DVD RW / CD RW
Mon: ViewSonic?s VX2233wm
 

A:Multiple Unformated Partitions

Download EASEUS Partition Master 3.0 Home Edition

http://www.partition-tool.com/personal.htm

Should allow to do what you want!

Mike
 

http://www.techspot.com/community/topics/multiple-unformated-partitions.124364/
Relevancy 25.37%

Hi This will be my first but probably not last post here I recieved my new computer last Thursday and ever since I ve been experiencing BSODs in Windows There seems to be no obvious trigger it happens when running programs playing games installing software or even just browsing the web I ll give you some specs here Motherboad Gigabyte MA X-UD CPU AMD Phenom II GHZ CPU Cooling OCZ Vendetta II Memory MB Corsair XMS GPU ATI Radeon GB System drive GB SSD OCZ Vertex Storage drive GB WD Green PSU Corsair W PSU CMPSU-TXEU OS Windows XP -bit CPU-temp right now is degrees and this is after running prime with small FFT for mins GPU is at degrees When the BSODs started I proceeded by resetting CMOS reloading BIOS defaults and reinstalling Win XP But no difference Today I ve been running Memtest test and it made two passes with no errors Also did one pass with default tests which also passed without errors However when running - New - BSODs attached Random Minidumps computer Prime torture test in blend mode the workers fail New computer - Random BSODs - Minidumps attached within minutes New computer - Random BSODs - Minidumps attached regardless of running with or threads Running in Small FFT New computer - Random BSODs - Minidumps attached mode seems to be no problem at all Yesterday I tried using just one memory stick but once again got the BSOD when browsing the web I honestly have no clue how to move on from here Is there something else I can try Hope someone can shed some light on the situation I ll attach some minidumps been trying to understand them but to me it seems like there s a different error everytime nbsp

A:New computer - Random BSODs - Minidumps attached

Problem solved it seems, changed timings on memory from stock 5-5-5-18 to 6-6-6-18, and now prime 95 blend have been running for 1 hour with 4 threads and no errors!
 

http://www.techspot.com/community/topics/new-computer-random-bsods-minidumps-attached.124170/
Relevancy 21.5%

I will try to explain this the best I can it seems weird but this problem seems to have started after my dad pluged his blackberry Multiple apparently network invisible connections into one of my Multiple apparently invisible network connections usb slots to charge it because they were Multiple apparently invisible network connections all full on his computer Although I had already been repairing my internet connection quite frequently lately before I could connect with a browser this would be while my connection was actually Multiple apparently invisible network connections active as ABC was uploading and downloading So after my dad unpluged his device I opened firefox It couldn t connect and the connection would not repair Meanwhile ABC is still connected I shut down ABC disabled the network connection From this point on I could not connect to the internet The connetion itself is fine My dad s computer is feet away running off the same router I unistalled my network card and when i re installed it my network conection icon was now quot network connection quot but could still not repair or connect with various error s most like quot cant get a network adress quot so bla bla bla - bang my head and repeat by this point I have quot network connection quot In my searches I discovered the blackberry must have given me quot client services for windows quot as I also have to log on with a password when i re-boot I have read and tried EVERY THING in the quot How do I uninstall Client Services for Netware on Windows XP Professional - quot thread to No Avail In other searches I found others with the multiple network connection problem but no soloution I m guessing that the quot network connection amp quot must be somewhere causing the problem Like maybe all have that damn client servies installed or somthing but I cannot even find them to get rid of it all i can say is thank god there is another computer that can get online feet away currently when i try to repair my connection the only visible one called quot Local Area Connection quot it says it could not renew my ip adress i think maybe a accidentaly unintalled the client or somthing and can t re-install it nbsp

A:Multiple apparently invisible network connections

get a command prompt (run->cmd) and enter
ipconfig /all >mytcp.txt
attach mytcp.txt to your follow-up; the file will be in your %profile% directory

this will document ALL the interfaces and their current settings
 

http://www.techspot.com/community/topics/multiple-apparently-invisible-network-connections.123726/
Relevancy 22.36%

I have two logitech usb laser mice on my pc This is so I can use one right handed or left handed without dragging the wire all over the place My specs left hand mouse logitech M-UV A right hand mouse logitech M-UR A looks just like mice Multiple the other one Windows XP pro usb through Dell monitor ports My problem is that the cursor moves different amounts with the same movement on either mouse Plus the right hand mouse has trouble highlighting text and resizing windows I do not have any idea if they are the same resolution as I have not been able to find that on the logitech site Is there a test that can measure mouse resolution Does Multiple mice anyone know how to set the mouse movement individually I am trying to avoid the obvious answer move the mouse from one side of the keyboard to the other when I want it there Anyone have any ideas about this nbsp

A:Multiple mice

If they aren't the same optical resolution you probably will always have at least the speed/movement issue with defaults. Do either of the mice have their own driver that came on a disk (or is downloadable). Because if so, you may be able to install the mouse driver for that mouse and then adjust it individually.

The other alternative is to buy another mouse that matches one of the ones you are using now, that way they'd behave the same.
 

http://www.techspot.com/community/topics/multiple-mice.122691/
Relevancy 21.93%

In the BIOS Cpu Speed is set(manual)
Freq Multiple is (8x)
When I plugged in Vid Card 6600gt---system would not boot
plugged in Vid Card fx5500--no prob--residual error message was "system hung on improper FREQ MULTIPLE"

Originally this system ran with the 6600gt-poorly,with a 300w psu
For the last 2 years ,I was using a 465 w psu-which pooched -causing a "system failed cpu test "error message--which could only be read after rebooting with the 300w psu and fx5500 card.
So now the questions: (1) Would it be of any benefit to change the FREQ MULTIPLE to a higher or lower value--or Auto?
(2)are both error messages just due to a faulty Psu?
 

http://www.techspot.com/community/topics/cpu-speed-freq-multiple-question.121582/
Relevancy 21.07%

Well my Techspot friends I have a good one for you This just goes to show how a fool and their money will often be made to spend more and more and more Any ideas about a professional liquid cooling unit that will properly disperse heat from two GTX s in SLI and a Quad Core Extreme CPU The fool had gotten some ordinary tubes from Home Hardware or a generic store for & Liquid Multiple Core Quad 8800GTX Cooling Extreme not thermaltake s website and now there Liquid Cooling for Multiple 8800GTX & Quad Core Extreme are problems Liquid Cooling for Multiple 8800GTX & Quad Core Extreme with his system surprise surprise Example being the little pebble looking particles in both the basin for the coolant and the lines from the VGA water block out of the two other employees both of them are superiors to me one has had a cooling kit for longer than I have and my system has been on Liquid for over years no cleaning or flushing of the lines and ZERO problems So the question is as follows Anything powerful enough to take on the Two GTX s and the QCore Extreme CPU Nothing looks promising from Thermaltake s Website - Have yet to check Zalman and Cooler Master Thx Guys -Crack nbsp

A:Liquid Cooling for Multiple 8800GTX & Quad Core Extreme

Check Coolit's site. I purchased a freezone from them 2 years ago for a q6700, it ran well. I know they have newer modles that even cool gpus as well.
 

http://www.techspot.com/community/topics/liquid-cooling-for-multiple-8800gtx-quad-core-extreme.121019/
Relevancy 22.36%

I recently got a Acer - Not real sure of it s past When I got it there was no hard drive ram or wireless card I put all those in and get multiple Multiple Conflicts Resource resource conflict pci on motherboard errors This happened before I installed an operating system I Multiple Resource Conflicts can press F to continue or F for BIOS Multiple Resource Conflicts I was able to load XPpro but can t get many of the xp drivers downloaded from the Acer site to install correctly Ethernet card reader etc In device manager all are unknown devices and not working but under properties there location match the locations listed below I can get on the internet with a USB wireless adapter and MSoft update site is not giving me any drivers to update Here is the exact error messages and a pic of device manager Thanks for any help Error Resource Conflict-PCI on Motherboard Bus Device Function Error Resource Conflict-PCI on Motherboard Bus Device Function Error Resource Conflict-PCI on Motherboard Bus Device Function Error Resource Conflict-PCI Network Controller on Motherboard Bus Device Function nbsp

A:Multiple Resource Conflicts

Is this close to you Acer Aspire laptop's specs?
http://www.dealtime.com/xPF-Acer-Acer-ASPIRE-5050-3371-REFURBISHED-Laptops-14-REFURBISHED-80GB-hard-drive-laptop

This laptop originally came with Vista Home Premium installed. Is a vista reinstall possible?
 

http://www.techspot.com/community/topics/multiple-resource-conflicts.118785/
Relevancy 21.93%

Every time I try to start my computer I have to restart it multiple times before it will actually start all the way. The lights all come on and then it just sits there and does nothing so I have to restart it and then after about four times of doing that it will finally start up. Sometimes if I take my battery out it starts up faster and with less tries.

Any advice on what it might be?


Thanks Lindsay
 

A:Computer takes multiple tries to start up

Have a look here: Tutorial: No POST (Power On Self Test)
 

http://www.techspot.com/community/topics/computer-takes-multiple-tries-to-start-up.118607/
Relevancy 25.37%

Hi all Summary Am having a custom-built PC that worked just great for the last months Then I started getting random issues BSODs mouse-keyboard freeze computer fails to shut-dowm after OS shutting down For the system freezes, Random six-month old BSODs, past Random BSODs, freezes, six-month old system two weeks now the issues are getting more and more frequent No significant changes were made to the hardware or software Have run UltimateBootCD scans removed almost all hardware except bare bones CPU Mobo Random BSODs, freezes, six-month old system nVidia graphcis card memory PS keyboard and mouse and power supply plus fresh install of Vista SP bit WinXP Pro with without any third-party drivers Once a freeze happens it is a lot faster to happen again even after a fresh reboot Freeze happens with bootable CD programs also that s why I did not list HDD and DVD drive into the bare bones list above -- if I have one of the two Random BSODs, freezes, six-month old system I can start the system and issues happen Here s the current configuration see more freezes here than BSODs Intel Core Quad Q GHz Abit Fatal ty FP-IN motherboard No overclocking GB RAM passes UltimateBootCD tests EVGA GT PCI-x graphics card Antec EarthWatts W power supply Plain old PS keyboard and mouse USB mouse also has same results Vista SP -bit with and without latest updates Also tested WinXP SP Pro same issues Also bootable CDs result in the same issues Prior original configuration more BSODs than freezes GB RAM passes UltimateBootCD tests Windows Mem diags tests Two SATA GB s GB Seagate hard-drives pass all scans Windows BootCD One SATA Samsung DVD-RW One Sony PATA DVD-RW Curiously if I enable boot-up memory tests in Bios it fails for GB and keeps on rebooting Yet with bios RAM tests disabled Windows Mem diags and UltimateBootCDs all pass after - hours running Installed SpeedFan on otherwise fresh OS install Let it track and show temperature and voltage charts all the way till freeze happens There is no jump seen in either temperatures or voltages This is NOT tracking nVidia card temperature though which does get hot but not enough to prevent me from touching for several seconds Some folks suggest Power supply may be bad Also nVidia cards have over-heating issue per the news all over the place a few months back Abit motherboard company seems to be gone Everything except keyboard mouse and Sony DVD-RW is new and under warranty Just that I do not know quot what quot is bad Bought Asus P Q SE mobo to see if that helps But a google search before opening the box said that folks have similar problems with that Mobo too Please help nbsp

A:Random BSODs, freezes, six-month old system

Found some place online to try disabling EIST and C1E CPU settings in bios. Did that, problems still exist.
 

http://www.techspot.com/community/topics/random-bsods-freezes-six-month-old-system.117245/
Relevancy 21.5%

Hey guys,

I'm very new to networking so please forgive my lack of understanding!

Recently moved into a mates house, the router for the Internet is a Netgear Super G and manages to transmit a pretty good signal to most of the house - apart from my room at the other side of the house.

Now, I also have the same router (Netgear Super G) and was wondering if it was possible to use this to boost/spread the signal to reach my room?
The router has one modem input and 4 Ethanet cable sockets...

Any help/tips would be greatly appreciated!

Thanks,
James
 

A:Using multiple routers to boost/spread a signal

I don't consider networking my strongest point.

But I'm pretty certain you can't if anything they would probably knock each others signal out (if they're on the same channel).

There are signal boosters you can buy but they're not very good either, if you want some extra speed out of your wireless I would advice getting a "N" router, it's one up from Super G but you need an "N" adapter for your computer as well.

Hope this answered your question.
 

http://www.techspot.com/community/topics/using-multiple-routers-to-boost-spread-a-signal.106320/
Relevancy 25.37%

Hey guys I have done extensive research on my problem and I cannot find anyone else who is having the same thing I have done quite a bit of work on this and I SLI on nvidia Newer cause BSODs enable drivers have some interesting results to report The particulars of my rig I have also attached a sysinfo dump EVGA mobo- -k -nf X GeForce GT Newer nvidia drivers cause BSODs on SLI enable EVGA -p -n -TX and EVGA Newer nvidia drivers cause BSODs on SLI enable -p -n -ax AMD Athlon X watt PS XP Nforce X running latest driver I will spare you all of the bloody details and cut to the chase Using any nvidia drivers newer than the system will immediately BSOD when I enable SLI The BSOD window references NV mini sys Each card works fine in isolation- even with the latest drivers In fact I have been running on one card for months with no problems I un-installed each of these drivers in safe mode For all of this testing I had also un-installed all of the Nforce drivers as well So the ONLY nvidia thing installed was the display drivers Here are my findings Nvidia driver - worked - worked - DID NOT work - DID NOT work - DID NOT work So my rig is running right now fine and I have reinstalled the nforce drivers but I dont like being stuck on older drivers Here are some other things that I investigated - New BIOS for MOBO- nothing on EVGA- considered taking a month newer BIOS for the jetway t -sli but it did not seem relevant -no PCI latency setting in this BIOS Installed the utility to do it in software but I couldnt figure it out- seemed risky - found that there WAS another power connecter on my MOBO for SLI that I had not hooked up Thought that was it for sure but it made no difference - swapped the boards around Started with one and then the other -removed all other PCI boards from the system -no overclocking anywhere Although I did tweak the ram a little a long time ago but again the system is SOLID without SLI -I didnt scrub the registry of nvidia perhaps I should I scoured the web but I dont see anyone having issues with this Perhaps it is due to the sightly different cards I am running I called EVGA and they gave me some BS EVGA- upgrade the BIOS on your mobo- ME- OK what BIOS would that be for my EVGA mobo you dont have one on your website EVGA- ahh- ok dont worry about that Reinstall your drivers in safe mode I will say that this did put me on the right track so maybe I should not be so hard on them but clearly this was their pat answer for everything The next step was to reinstall OS of course So I am looking for ideas What did I overlook Is anyone else having this kind of issue with a similar rig Did something drastic change after Is SLI even worth it Thanks Stuart More Sys info System Information report written at System Name PHEONIX System Summary Item Value OS Name Microsoft Windows XP Home Edition Version Service Pack Build OS Manufacturer Microsoft Corporation System Name PHEONIX System Manufacturer NVIDIA System Model AWRDACPI System Type X -based PC Processor x Family Model Stepping AuthenticAMD Mhz BIOS Version Date Phoenix Technologies LTD PG SMBIOS Version Windows Directory C WINDOWS System Directory C WINDOWS system Boot Device Device HarddiskVolume Locale United States Hardware Abstraction Layer Version quot xpsp - quot User Name PHEONIX Stuart Time Zone Eastern Standard Time Total Physical Memory MB Available Physical Memory GB Total Virtual Memory GB Available Virtual Memory GB Page File Space GB Page File C pagefile sys Hardware Resources Conflicts Sharing Resource Device I O Port x - x AF PCI bus I O Port x - x AF Direct memory access controller I O Port x C - x DF PCI standard PCI-to-PCI bridge I O Port x C - x DF NVIDIA GeForce GT IRQ NVIDIA nForce Serial ATA Controller IRQ NVIDIA Network Bus Enumerator IRQ Ethernet Controller IRQ NVIDIA nForce PCI System Management IRQ Standard OpenHCD USB Host Controller IRQ NVIDIA nForce Serial ATA Controller IRQ AMD ACPI-Compliant System IRQ SCSI RAID Host Controller IRQ NVIDIA Ge... Read more

A:Newer nvidia drivers cause BSODs on SLI enable

So after this long post... Your findings summerized

"EVGA motherboards are sensitive to Nvidia video drivers". Can we say that?
 

http://www.techspot.com/community/topics/newer-nvidia-drivers-cause-bsods-on-sli-enable.116059/
Relevancy 21.93%

Ok I have a question I couldn t think how to word the title properly but it ll do Basically I m looking to upgrade my Mobo I have an ASUS M N-E SLI now it has x slots but one runs at x I need running at x each I m looking on Newegg for a new one and I decided to look at the ones that had x slots on em slots, x16 Multiple SLI PCIe compatible? I found a few I like Multiple PCIe x16 slots, SLI compatible? but I need to make sure the spacing is standard for SLI-ing or X-firing cards at the same time It looks like the x slots the Multiple PCIe x16 slots, SLI compatible? running at x are too far apart for a standard SLI bridge Here are the I found http www newegg com Product Product aspx Item N E http www newegg com Product Product aspx Item N E I d prefer the second one I like ASUS mobos a lot So will a normal standard SLI work on this or will I need a special cable OR will I have to put one in a x slot and one in an x slot cuz that defeats the purpose nbsp

A:Multiple PCIe x16 slots, SLI compatible?

Ok, a few days is enough. Can someone please answer this, I can't make a buying decision until I get some input here. I'm not asking much, really, just whether I'd be able to use this for SLI-ing cards on both the 16x (speed) slots. Please?
 

http://www.techspot.com/community/topics/multiple-pcie-x16-slots-sli-compatible.115562/
Relevancy 21.07%

Hello there 2.1 none? 1.0, RAM-errors, BIOS -> (BSODs) BIOS I ve been (BSODs) BIOS 1.0, RAM-errors, BIOS 2.1 -> none? having unpredictable BSOD s ever since I built this computer They aren t very frequent but since I ve had two over days I want to track this problem down System specifications CPU Intel Core Quad Motherboard Gigabyte EP C-DS R RAM Corsair Dominator PC x Harddrive Seagate Barracuda gb GFX XFX GT PSU Corsair W The initial problem started just after I ran the computer I had a BSOD so I can Memtest to check for errors I got heaps of them so (BSODs) BIOS 1.0, RAM-errors, BIOS 2.1 -> none? I updated the BIOS and to my great surprise all the errors seeemed to have disappeared Afterwards I ran my computer and had few BSOD s a month Just yesterday I realized my RAM were running V so I bumped them to V as recommended but I got another BSOD today which was only shown for second and the computer restarted compared to my usual ones being constant Code BugCheck F bab d Probably caused by Unknown Image ANALYSIS INCONCLUSIVE Old ones being Code BugCheck E c bfc f b bec b e Probably caused by nv disp dll nv disp c Code BugCheck E c e d a fca Probably caused by ntkrpamp exe nt NtQueryPerformanceCounter Code BugCheck E c b fb e Probably caused by nv disp dll nv disp c ab Now some of them point at the Nvidia driver After the first Nvidia BSOD I cleaned my drivers completely even Driver Cleaner Pro and updated to the newest drivers so I don t think it s a faulty driver problem It s very easy to conclude that it can be the GFX RAM motherboard CPU or PSU but seeing I can t afford to replace all this I need to find the exact culprit Thanks in advance - help is much appreciated nbsp

A:(BSODs) BIOS 1.0, RAM-errors, BIOS 2.1 -> none?

Update: Just today I noticed a faint "clicking" sound I believe is coming from the harddrive. It's probably just the usual sound of the harddrive, but it must've become louder since I can hear it.
Might a faulty harddrive be a part of it?

EDIT: For some reason this was only noticeable during the first 20-30 minutes of system uptime.
 

http://www.techspot.com/community/topics/bsods-bios-1-0-ram-errors-bios-2-1-none.114989/
Relevancy 26.23%

Hi I ran into another Problem I start my PC it boots but the display has a kinda bad it has now BSODs display and bad about cm wide - vertical strips of dots and the DOS text kinda vibrates which makes it almost impossible to read Here is the full BSODs and now bad display story My PC specs Asus A N SLI Deluxe AMD Athlon Geforce GT GB Kingston RAM GB Sata Seagate Hard-disk watt PSU I use my PC generally to play games My cousin and me have been playing PES PES PES and recently PES from long time but none of those heavy games like Crysis or Call of Duty some internet BSODs and now bad display surfing rarely movies nothing else A few months ago Chip-fan died and I replaced it with heatsink I regularly checked temperature levels and they were better than they were during fan-days One day just after login the PC freeze badly no mouse keyboard worked and then a Blue screen of Death came with this code C D B F F After restart it worked fine but over time they became more frequent but I kept ignoring them I got a new Gamepad those days sometimes after pressing reset button my PC won t boot I mean no beep or something would come and the light besides the power button won t blink But after starting again after - minutes it started fine One day I googled about the problem and thought that it was due to bad RAM so I ran this Memtest thing for about hours and it said that it has errors So I reinstalled Windows and no problem came for - days but after that same problem same BSoD with same code started to pop again and again Yesterday I put the RAM in a different slot and Moved the Sata HDD to other slot but the problem persisted Today I got the new FIFA and same BSoDs came twice but it started fine third time It installed I started my new match within minutes van Persie BANG GOAL from long range and as soon as players started to celebrate the PC freezed there and the funny sound went on again and again Different thing this time was that the screen had green dots in vertical lines about cm wide So I pressed the reset button and when it restarted again the same dots were there otherwise it displayed only till windows loading logo then it went black and light on the monitor panel started to blink I started it after minutes and those dots were still there and it would go blank again after windows logo I have tried to reset it again and again with no luck I tried the GFX card in second slot and the problem persists then I did more damage I tried another BIOS memory chip that small circular thing from my old gone PC the problem remains and a new problem popped I managed to read through the dots it said something like quot Checksum something quot and in the next screen quot Press something RAID Utility quot So far I have checked my Monitor on my Laptop and it is fine Any help from those genius people here would be very very appreciated Sorry for my lack of knowledge and bad English nbsp

A:BSODs and now bad display

The 'BIOS memory chip (that small circular thing) from my old gone PC' is a battery that supplies retention voltage to your CMOS (bios). The checksum error is because it now has no voltage and it 'forgets' things.

Put the original back in.

Your other symptoms sound more like your graphics card failing or driver corruption than anything else. Uninstall your graphics drivers from Add/Remove and reboot. You'll only have VGA. How does that perform?
 

http://www.techspot.com/community/topics/bsods-and-now-bad-display.114886/
Relevancy 21.93%

I am usine a belkin-n router, I have 7 computers running off the one router. 2 are hardlined in the other 5 are wireless. Have been running this system for approximatly a year. Within the last 3 weeks at roughly the same time in the evening I have been experiencing a lag issue. It has kicked different comp. out of AIM chat rooms, off online games and even from msn messenger. during a couple of these episodes have run a speed check and it has checked out. went through each computer and ran virus scans, even restored a couple to original set-up. have gone so far as to shut down all but one computer and still seeing the lag issue. not all 7 computers are on typicallly at the same time usually only 3-4. Any help or ideas anyone has would be appreciated.
 

A:Multiple computers on one router, lag issues

This can be an issue at the ISP and not directly related to your router/lan/systems.

When the dropout occurs, use a browser to access the router config page, login
and check the WAN side config -- specifically look for WHEN the lease was granted
and when it will expire.
 

http://www.techspot.com/community/topics/multiple-computers-on-one-router-lag-issues.114266/
Relevancy 22.36%

wire - HG-E modem wire com index php p - Belkin FSD - Wireless N Routers tigerdirect com applications SearchTools item-details asp EdpNo amp CatId Ok what I have is a resturant who has ATT dsl with a wire modem don t care about the wireless apart to far to be effective would like to disable it They would like to have wireless internet for their customers in the dining room so i ran a cat e line from Multiple Wireless Routers the modem to the first Belkin router and everything works fine Its an open connection so anyone can come in and connect with their laptop From there i ran from port one jack to another Belkin router also in the ceiling for the owner She wants this one to be secure so no one can access her files Multiple Wireless Routers or laptop I put this one as quot access point quot and secured it with a bit wep key Now for some reason as an acces point i can connect with my laptop using the network key i m using xp but we can not get her laptop vista to connect It sees the signal when you quot veiw availble wireless connections quot but it won t Multiple Wireless Routers connect Strange thing is when i use that router as a regular router instead of an access point we can all see it as available but no one can connect not even me This lady is very nervous about her signal and wants her part to be secure she even had me hook up her all in one to the secured router so she could print fax wirelessly over her secured router Any ideas why i can connect to the secured quot access point quot with my laptop but we can t connect with hers nbsp

A:Multiple Wireless Routers

Disable the wireless part of the 2wire and have it just act as a DHCP server through it's switch (I assume it is also a switch). Connect the belkin routers to your switch (2wire) with a cat5 cable. Set both belkin routers as access points with different ip's (you might have to do one at a time if they share the same ip) and have them use the same SSID and different channels. I know this works with two routers of the same type/brand.. not sure if it will work with your setup.. As far as people accessing your laptop files all you have to do is turn file and print sharing off on that particular pc/laptop and will not even show up when you browse the network.. If you need to have file sharing on you could set the appropriate permissions when you share a drive/folder so that only certain people (your boss) can access it as well as require a password for access. This way anybody can connect to the wifi without a password and no one can access your laptop. There is no way to gain access of her laptop if file sharing is turned off, not only that if if it is XP or later it will have a firewall built in to prevent exactly that.

Edit: You might not even need the second belkin if your laptop is within range of the first belkin and if that's the case you might just be able to use the 2wire. I dont know the distances you are dealing with.
 

http://www.techspot.com/community/topics/multiple-wireless-routers.113805/
Relevancy 21.07%

Hello guys thanks in advance for your time I have been getting multiple blue screen errors for months now on my ASUS box and it s so bad at times I can t even boot the computer I built the box myself it ran fine for a yr or so then the bsods started and have been getting progressively worse over the past - yrs I have analyzed several minidump files recently also these are attached and windbg says it s the fault of multiple different drivers and processes it really varies The blue screens usually start during intensive processes playing high res game converting large video files etc and once one pops up they will continue - at times I ve been unable to boot up the machine due to non-stop blue screens or freezes during the black Windows XP loading screen If it does manage to start up after several restarts it s fine as long as I stay away from intensive processes Seems as if I leave it a while off when I eventually come back it will start fine every time I was wondering if you guys could suggest any troubleshooting tips and help me get to the bottom of this in Multiple all blue included XP, screens specs/dumps/tests feel free to check the minidumps as well More info on my system amp setup ASUS M N -SLI Deluxe Wireless Edition AM NVIDIA nForce SLI MCP ATX AMD Motherboard AMD Athlon X Windsor GHz Socket AM W Dual-Core Processor CORSAIR XMS GB x GB -Pin DDR SDRAM DDR Multiple blue screens in XP, all specs/dumps/tests included PC Memory OCZ GameXStream W ATX V SLI Certified Power Supply EVGA GeForce GTS MB -bit GDDR PCI Express x SAMSUNG HD LJ GB RPM SATA Gb s HD Pioneer X DVD R DVD Burner Black E-IDE ATAPI Windows XP SP Up to date I ve booted with a ramtest and found no problems on several passes I also have performed a full scan with Mcaffee and Ad-aware with no problems threats on either Thanks again for your help Minidump logs attached nbsp

A:Multiple blue screens in XP, all specs/dumps/tests included

Do you have Daemon Tools installed ?

Please uninstall Daemon Tools if you do

Looks like Mcafee BSOD due to MFEHIDK.SYS

Also thanks for the full results scan, you just need to know how to read them now
 

http://www.techspot.com/community/topics/multiple-blue-screens-in-xp-all-specs-dumps-tests-included.113642/
Relevancy 26.23%

hey guys i basically have built a new pc and it just random gives me blue screens its really annoying me now and i dunno whats wrong.

the pc specs are:

intel q9650
280 gtx gpu
4gb dd3 Ocz reaper x
samsung ssd 32 gb for os
western digital 1tb for music and suff
asus p5e3 premium wifi mobo.

i got all the latest drivers and the blue screens that i have been getting are:

driver irq not less and somthing..

and

page file error.

i hope this helps.
 

A:Random BSODs Please Help Me

faulty hardware somewhere? usualy ram.
 

http://www.techspot.com/community/topics/random-bsods-please-help-me.111549/
Relevancy 21.5%

Ive got a good old Compaq Presario SR NX When i get it to run right SR1550NX problems Multiple Presario Compaq with it runs good When i don t its a pain Multiple problems with Compaq Presario SR1550NX I got it from a friend who said its unsalvageable but i said i wont be using it because ima rip the gb hdd and lightscribe Dvd burner out of Multiple problems with Compaq Presario SR1550NX it to use in a new build so i bring it home and it boots up fine and then thinking mabey my friends an it decides to freeze so i hold the power button for seconds unplug it for a minute or and plug it back in i go through that a few times and i try to save the os it was pirated but i fail so i install Xp home off the cd that came with my dell and it seems to be running fine now but i have had some problems which i will list Keyboard and or mouse quit working or dont work Monitor doesn t get a signal or i get a message saying invalid sync Freezes at Bios screen where you see Press f to options Freezes while booting It only shows i have mb Ram when the chip says I have flashed the bios unplugged for several hours not a jumper or battery i can find Reinstalled windows cleaned keyboard and mouse contacts removed all unnecessary hardware modem dvd drive ect I do not have to save this computer but id like to turn it into a server of some sort dns webhosting if anyone can help it would be nice Gflo nbsp

A:Multiple problems with Compaq Presario SR1550NX

well im not gonna replace it and it seems to be running fine since i installed XP home on it
 

http://www.techspot.com/community/topics/multiple-problems-with-compaq-presario-sr1550nx.108705/
Relevancy 26.23%

Hi, I randomly get BSOD's about IRQ_NOT_LESS_OR_EQUAL

I checked my IRQ's and I noticed a couple things...

High Definition Audio Controller is on the same IRQ as my Nvidia GeForce 8800 GTS.

I also noticed another High Definition Audio Controller on the same IRQ as Nvidia Nforce Serial ATA Controller

Are these bad things to be sharing?

My specs:

EVGA Nforce 680i SLi LT Mobo
4x 1gb Adata DDR2-800mhz
EVGA Geforce 8800 GTS SSC edition
Intel Core 2 Quad q6600
Soundblaster X-fi PCI Expressx1
500gb Seagate barracude 7200rpm HDD (SATA)
52x LG Dvd rw/cdrw lightscribe drive (SATA)


Thanks for any help you can offer.
 

A:IRQ Sharing... BSODs

What operating system are you running? Are you running in SLI mode now? Do you notice what you are doing when the BSOD's happen?
 

http://www.techspot.com/community/topics/irq-sharing-bsods.107673/
Relevancy 18.92%

Where does this argument stand now? I'm putting a medium level system together for gaming and am dumbfounded by the division over this topic. I'm beginning to think the pros can't even prove which is better.

I'm not trying to start a heated debate here. I just want to buy a good power supply for the right price. I'm beginning to think both can be good but I'm thinking the single rails would be more reliable.

Maybe a better question is what is the most important thing to look for in a PS?
 

A:Power Supplies: Single Rails vs Multiple Rails

Multiple rail PSUs cause problems when one rail gets overloaded and shuts the PSU down. For example, if a video card pulls 18A from a PSU that has two 15A +12V rails, it may overload one of the rails and destabilize the PSU.

Thus, in most cases, a single-rail PSU is almost always better than a multiple-rail one. But understand that all single-rail PSUs are not guaranteed to be great. Only high-end PSUs that deliver large amounts of power on a single +12V rail can be classified as excellent PSUs, since they typically have better internal parts such as high-quality Japanese capacitors from Rubycon or Hitachi and sturdy casings and fans that do not vibrate dangerously. PC Power & Cooling, Seasonic and Corsair are among the best companies that produce units rated as low as 450W with single +12V rails.

The ultimate thing to look for in any PSU is the total power supplied on the +12V rail(s). If it's a multiple rail PSU, divide the power value by 12 to get the amps provided in total across all the rails. A PSU with any documentation that does not provide this information is to be avoided. The same goes for a PSU with no documentation at all.

Lastly, look here for more pointers on how to buy the right PSU for your system.
 

http://www.techspot.com/community/topics/power-supplies-single-rails-vs-multiple-rails.107250/
Relevancy 25.8%

I did a complete rehaul of my PC about months ago and I ve been experiencing all types of BSOD s and random system crashes The crashes are usually a lockup that results in my audio replaying like a broken record and occasionally a completely random restart without BSOD The crashes do not occur just when I play games A few weeks back when I d boot up Windows it and BSODs Crashes Random would find new Hardware PCI Device I tried reinstalling Mobo Drivers and it fixed the problem but it actually increased the frequency of the BSODs BSODs and Random Crashes and crashes I also had problems updating my BIOS when I originally installed my mobo It wouldn t allow my PC to boot into Windows unless I used the default BIOs Here are the errors I find in BSODs and Random Crashes event manager starting from most recent The Application Layer Gateway Service service failed to start due to the following error The service did not respond to the start or control request in a timely fashion Timeout milliseconds waiting for the Application Layer Gateway Service service to connect Error code f parameter parameter bab d parameter parameter The HTTP SSL service failed to start due to the following error The service did not respond to the start or control request in a timely fashion Timeout milliseconds waiting for the HTTP SSL service to connect Error code parameter c a parameter parameter a parameter The Application Management service terminated with the following error The specified module could not be found Error code a parameter d d parameter c parameter parameter bff Error code d parameter parameter parameter parameter ba Error code e parameter c parameter bfa eca parameter b b a parameter I ve tried reinstalling mobo drivers graphics drivers and sound card drivers I ve tried running Windows Memory Diagnostic with multiple passes but it shows no faulty memory however when I send error report to Microsoft it says that it suspects faulty RAM My system specs are as follows Microsoft Windows XP Home Edition Version SP Intel R Core TM CPU GHz GHz GB of RAM Intel Core Duo E Conroe GHz LGA W Dual-Core Processor EVGA -P -N -AR GeForce GTS Superclocked MB -bit GDDR PCI Express x HDCP Ready SLI Supported Video Card ASUS P N-E SLI LGA NVIDIA nForce i SLI ATX Intel Motherboard CORSAIR XMS GB x GB -Pin DDR SDRAM DDR PC Dual Channel Kit Desktop Memory Model TWIN X - Linksys Wired Gigabit Network Adapter Linksys Wireless-G GHz Router Motorola SBS SURFBoard Cable Modem Mad Dog MegaSTOR x Triple Format DVD Burner Comp-USA x DVD-ROM Drive Creative Soundblaster X-Fi XtremeMusic Soundcard Can t tell you the power supply model off hand but its w and appears to be running smooth I also use three different internal hard drives Seagates and a Maxtor OS is running on a Seagate I have dual boot Vista XP with XP on as my main OS Crashes also occur when running on Vista with minimal software installed just Norton Internet Security NOD Deamon Tools keyboard drivers mouse drivers video and sound drivers etc most recent Minidumps are attached to this thread along with a copy of DxDiag txt nbsp

A:BSODs and Random Crashes

Check that you're running the RAM at the correct voltage. You're getting a lot of memory errors.
 

http://www.techspot.com/community/topics/bsods-and-random-crashes.97355/
Relevancy 21.07%

Hey guys,
Very recently my computer has been crashing with the jagged lines of death. After it reboots, the screen becomes split up into multiple "instances" of one screen, very similar to if you select the "tiled" option in windows background. Example:
__________________
| Normal| Normal Image|
| Image | |
| | |
______ _________ |
|Normal | Normal Image|
|Image | |
___________________

Where the box around the outside is my monitor, and four "normal" images (i.e. the desktop, mouse cursor, etc.). No idea what is causing this, however, uninstalling then reinstalling the graphics drivers seems to temporarily fix this. If anyone has heard of a similar problem or knows what to do, please help!

Comp info:
HP Pavilion dv2500 series
NVIDIA GeForce 8400M GS 64MB Dedicated Video Memory (from nvidia control panel info)
2GB RAM
160GB HD
Centrino Core2 Duo T7250 @ 2.0 GHZ
Windows Vista 32Bit Home Premium
 

A:HP Pavilion dv2500 series crash with multiple monitor instancing

this is videochip faulty(or video memory). afaik, since geforce 8400go, nvidia provides special MXMII videocards in most laptop models. so replacing seems to be simple, but in this model you can't do this. so you can replace MB or repair it
 

http://www.techspot.com/community/topics/hp-pavilion-dv2500-series-crash-with-multiple-monitor-instancing.106630/
Relevancy 24.94%

Hi - virgin post so hope it s in the right place Had to replace Maxtor SATA dead Dell after (clicking) 8400 HD BSODs replacing GB HD after it started clicking and BSODs Now using TrekStor SATA GB HD but after installing Win XP it crashed at the very end of the install XP install seems fine and has continued blue screening every few minutes since though works fine in Safe Mode and also has passed every one of the Dell Diagnostic tests full version Have installed Dell 8400 BSODs after replacing dead (clicking) HD the latest drivers at far as I know for chipset etc but still frequent BSODs Have a selection of minidump files - unsure how to analyse them - not always the same message - sometimes involving iastore sys sometimes not Recommended to this site though I m not a techie prepared to have a go Machine months outside yr warranty - what a pain Would really appreciate advice on what to do next - have spent days researching to no avail nbsp

A:Dell 8400 BSODs after replacing dead (clicking) HD

Is this a 2004 system? Have you tried updating the motherboards bios?
 

http://www.techspot.com/community/topics/dell-8400-bsods-after-replacing-dead-clicking-hd.105425/
Relevancy 25.37%

hello
Last week i assembled a new computer for myself. the specs are as follows:

asus p5k pro
intel quad q6600 2.4
2 gb ddr2 800 team elite
disco sata 350GB 16mb western digital
asus gforce 8800gt 512mb
gravador de dvd nec sata

when i first started the computer, and started installing windows i got a bsod, after the reboot all went well, but when i started installing drivers, i started getting BSOds after each install.
it became a padron: each time i install a new program, a new driver, or a new hardware (like a usb pen) i get a BSOD, but after that i can use it without a problem. i did some memory tests, but no problem was found.
can anyone help me?
 

A:Lots of bsods, cant find the reason

That P5K Pro board has been infamous for disliking certain memory modules. See if the memory you have is on the ASUS recommended list.
I assume you have checked your Device Manager and there are no yellow or red flags there. If not, please do so.
BSOD's are most frequently driver related. But can be caused by memory the motherboard does not like, or a unacceptable video graphics card.
I would start by trying one memory module at a time, or running the free MemTest86 for four hours or 7 passes, whichever is shorter.
Alternately, try different standard memory modules such as Crucial, Kingston, Corsair, OCZ, Infineon.
For video graphics, try going back to a slightly earlier version of the Driver, or go to a different source to get it.
Good luck. Please keep us posted about the change that fixes it.
 

http://www.techspot.com/community/topics/lots-of-bsods-cant-find-the-reason.105159/
Relevancy 22.36%

Hi,

My landlord has a router, on the 192.168.1.xxx range, ports are forwarded to .1.13(WAN side of my router upstairs), then from there to .2.155 (dumb AP) and THEN to the server .2.31

Yet, I cannot VNC in on 5800 or 5900. I can within the network, not a problem!

Anyone got an idea what's going on here?
 

A:VNC through multiple routers

hum; cascading routers do create problems when port forwarding is required.

you need each router to port forward to the address of the next router and
the last one forwards to your system for the VNC client.
 

http://www.techspot.com/community/topics/vnc-through-multiple-routers.105058/
Relevancy 21.5%

hi guys i m working on a winxp machine that has users that need access to all the same information i d like to keep things as transparent as possible so windows doesn t really folder MyDocs users the multiple Sharing with appear to function differently than normal i ve Sharing the MyDocs folder with multiple users also read up on changing the target folder for the quot My Documents quot folder my idea is to create a new folder and point both accounts MyDocs folder towards that new folder i understand there may be the occasion where one user will want to use a file that the other user has open but that is a minimal concern i d also like to make is easier to back up the files from both users with a single operation instead of digging through things so the big question is is there any reason that its a bad idea for users on the same Sharing the MyDocs folder with multiple users machine to use the same logical folder as their my documents folder nbsp

A:Sharing the MyDocs folder with multiple users

Your working too hard at the objective. There's a Shared Documents fold that is intended to be shared by everyone.

Under the All Users, there's the \Shared Documents; everyone has read/write/delete
permissions and can copy or create files therein.
 

http://www.techspot.com/community/topics/sharing-the-mydocs-folder-with-multiple-users.104273/
Relevancy 22.36%

Ive been learning how to setup multiple harddrives but im haveing problems. do they both have to be on the same ribbon cable? ive set the jumpers (one doesnt have jumpers) the ribbon cable is just to small =/ any advice, if i cant use 2 cables then ill have to redo my entire pc
 

A:Multiple Hard drives

What are you working with 4 IDE and SATAs? Did you update the BIOS?
 

http://www.techspot.com/community/topics/multiple-hard-drives.103471/
Relevancy 27.52%

My laptop was or Ntoskrnl.dll corrupt missing working just fine till Ntoskrnl.dll missing or corrupt this morning when i woke up i was transferring some files from my internal HDD to External HDD there was music going on in the background i think memory clogged and the laptop hanged Therefore i restarted the laptop by direct reset and Ntoskrnl.dll missing or corrupt after the BIOS screen the screen went to plain black and nothing else for like mins and then Ntoskrnl.dll missing or corrupt displayed error like quot Ntoskrnl dll quot missing or corrupt reinstall windows i forgot the exact file name Anyways i went to the geek squad at my college and the guy told me you can format your HDD and reinstall windows it will work fine but in future its gonna happen again and he was right because this has happened before like months back So what do you guys think If i buy a new HDD and replace it with the old one the problem will be solved One more small problem someone put BIOS password on my laptop how the hell do i remove it Thanks NoteBK Specs Compaq Presario R Pentium Celeron Ghz Ram GB MB HDD GB DVD CD ROM nbsp

A:Ntoskrnl.dll missing or corrupt

If it is indeed the hard drive that is faulty, then yes, replacing it will make the problem go away. Of course, the issue could be something much more serious like a broken motherboard.

You remove the password by using the proper settings in the BIOS setup. You need to know the existing password of course. (Better go and find that someone who set the password in the first place).
 

http://www.techspot.com/community/topics/ntoskrnl-dll-missing-or-corrupt.100980/
Relevancy 26.23%

Hi, im having bsods again and again after what i thought that my 1st ram slot was faulty and i did not use it and i reformatted. Worked well for around 2weeks and wham!, blue screen in my face. bad pool something, irq not less or equal, page fault in non paged area and i believe there were others i could'nt see fast enough. I still could'nt run memtest as i do not have a floppy and i could'nt burn it to a disc properly (burn process failed everytime, wished i know why) Could really use some help as i wish i could buy a new pc and roll this stuff down a cliff to vent my frustration. thanks for the previous help though.
 

http://www.techspot.com/community/topics/random-bsods.100753/