Windows Support Forum

BSOD when goes sleep, ntoskrnl.exe+e96d2/ntoskrnl.exe+81e7a

Q: BSOD when goes sleep, ntoskrnl.exe+e96d2/ntoskrnl.exe+81e7a

When I put my pc in sleep mode it often crashes: the screen goes normally in sleep mode, but the pc continues to stay awake for several minutes than BSOD & restart or BSOD & shut off.
Thanks to BlueScreenView I found what is seemingly the guilty process, but I don't know what to do now.
Attachment 315989
Thanks
Also, sorry for my bad english.

Relevancy 100%
Preferred Solution: BSOD when goes sleep, ntoskrnl.exe+e96d2/ntoskrnl.exe+81e7a

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: BSOD when goes sleep, ntoskrnl.exe+e96d2/ntoskrnl.exe+81e7a

Your HUAWEI Mobile Connect driver is causing issues here.


Code:
*** WARNING: Unable to verify timestamp for ew_jubusenum.sys
*** ERROR: Module load completed but symbols could not be loaded for ew_jubusenum.sys
Probably caused by : ew_jubusenum.sys
If it's a necessary driver then update it but if not then please completely remove it.
I'm not that familiar with such devices but it should be under Network Adapters, right click on the device and click properties, then click on the driver tab and update.


Code:
fffff880`015e0000 fffff880`015fc000 ew_jubusenum T (no symbols)
Loaded symbol image file: ew_jubusenum.sys
Image path: \SystemRoot\system32\DRIVERS\ew_jubusenum.sys
Image name: ew_jubusenum.sys
Timestamp: Mon Aug 20 01:55:56 2012 (50318B1C)
CheckSum: 0001CF99
ImageSize: 0001C000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

http://www.sevenforums.com/bsod-help-support/330151-bsod-when-goes-sleep-ntoskrnl-exe-e96d2-ntoskrnl-exe-81e7a.html
Relevancy 80.91%

At least 50% of the time my laptop will BSOD everytime, when closing the lid (sleep). BlueScreenView does not provide enough information to determine the cause. My thoughts, based on hours of searching, is that it may be wireless/bluetooth or MS Forefront Endpoint Protection. I have not used the WinDebug as I dont have any experience with it.
There are 2 recurring crashes. I dont know how they are related other than something hangs during sleep process. Any help would be appreciated.

A:DRIVER_POWER_STATE_FAILURE: ntoskrnl.exe+e96d2

mtneerman, you update the Intel? Wireless WiFi Link Adapter from Intel? Customer Support . Also download and install intel rapid storage driver, this version only.

Let us know the results.

http://www.sevenforums.com/bsod-help-support/278317-driver_power_state_failure-ntoskrnl-exe-e96d2.html
Relevancy 93.74%

Hey guys so I've been getting some random BSOD errors every few days or so I usually leave my computer on when I am at work or sleep and either when I come home Random BSOD error ntoskrnl.exe (address driver ntoskrnl.exe+74ec0) or wake up my computer is off So I turn it on and it says that the computer didn't Random BSOD error driver ntoskrnl.exe (address ntoskrnl.exe+74ec0) shut down properly when I start up I downloaded the BlueScreenView and noticed I've had some BSOD three times within days One Random BSOD error driver ntoskrnl.exe (address ntoskrnl.exe+74ec0) was a PAGE FAULT IN NONPAGED AREA error which I believe was a RAM problem i bought new RAM and installed it plus OCed it to but I believe it was making my system unstable so I reset the speed to default and haven't gotten that error again but after that I've gotten two IRQL NOT LESS OR EQUAL errors related to ntoskrnl exe I did some research online and from what I read it could be a number of problems I'm just not sure where to start and could really use some guidance and advice I uploaded my dmp files for anyone who knows how to look at these Thank in advance

A:Random BSOD error driver ntoskrnl.exe (address ntoskrnl.exe+74ec0)

Welcome to 7F. I'll take a look at your dumps and see if I can get you BSOD free.


One

 NETGEAR NEUTRAL WIRELESS SOLUTION

Your Netgear Neutral Wireless Solution driver has been flagged. It is quite old a could probably do with updating. Check for updates here
Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {0, 2, 1, fffff800034c88ac}

*** WARNING: Unable to verify timestamp for scmndisp.sys
*** ERROR: Module load completed but symbols could not be loaded for scmndisp.sys
Probably caused by : scmndisp.sys ( scmndisp+16d1 )

Followup: MachineOwner
---------

1: kd> lmvm scmndisp
start end module name
fffff880`0188b000 fffff880`01895000 scmndisp T (no symbols)
Loaded symbol image file: scmndisp.sys
Image path: \SystemRoot\system32\DRIVERS\scmndisp.sys
Image name: scmndisp.sys
Timestamp: Fri May 27 11:30:22 2011 (4DDF7D3E)
CheckSum: 00009C0C
ImageSize: 0000A000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4


Two

 HARDWARE DIAGNOSTICS

A few of your dumps (0x50, 0x124) are pointing towards hardware errors. 0x124s are usually always hardware errors but rarely give us an indication of what the problem actually is. In this case we may have struck lucky as this particular one shows up ASUS AI Suite III. The utilities listed below are the ones I'm concerned about.Attachment 353971


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa800752d028, Address of the WHEA_ERROR_RECORD structure.
Arg3: 00000000bf800000, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000000000124, Low order 32-bits of the MCi_STATUS value.

Debugging Details:
------------------
BUGCHECK_STR: 0x124_GenuineIntel

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

PROCESS_NAME: AISuite3.exe

CURRENT_IRQL: f

ANALYSIS_VERSION: 6.3.9600.17029 (debuggers(dbg).140219-1702) amd64fre
We have seen motherboard packaged utilities cause 0x124s in the past and it could be the case here.
Uninstall ASUS AI Suite III and test the system for stability.
Run SeaTools to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use
Download and run MemTest86+ to test your RAM. RAM - Test with Memtest86+


   Note
Attachment 353972 Run MemTest86+ for at least 8 passes. Ideally set it off before you go to bed and leave it overnight, we're looking for zero errors here. A single error will show something's going bad with your RAM.


Three

 NVIDIA GPU

You've also received a 0x116 which is a VIDEO_TDR_ERROR (Timeout Detection & Recovery) which means your GPU driver has crashed and has failed to recover in time. This could be down to the driver, the card itself or possibly the power to the card.
Code:
******************************************************************************... Read more

http://www.sevenforums.com/bsod-help-support/365399-random-bsod-error-driver-ntoskrnl-exe-address-ntoskrnl-exe-74ec0.html
Relevancy 93.31%

I am getting a BSOD during sleep mode, and only during sleep mode. It's been happening for the past few weeks infrequently, but it is extremely annoying.

I run an x64 system on a Dell XPS 15, original install. The system is about six months old, and as far as I can tell from the Dell website, all of my drivers are up to date.
All help is greatly appreciated!

A:BSOD During Sleep Mode ntoskrnl.exe

I think it might be a network driver, but as far as I can tell, mine are all updated.
Please help.

http://www.sevenforums.com/bsod-help-support/171191-bsod-during-sleep-mode-ntoskrnl-exe.html
Relevancy 93.31%

I have a Toshiba A that I upgraded from Vista -bit system to Windows -bit over a year ago I've had a few BSOD's here amp there but nothing all the time til recently Everything works fine except when the computer tries to go to sleep It will sit there for minutes until it times out and then the BSOD will appear and it 64-Bit ntoskrnl.exe 7 to when Windows sleep trying BSOD will shut down I have formatted my hard drive and reinstalled vista on my computer several times and then upgraded to windows each time adding all the components one at a time trying to narrow down which one is screwing everything up When I first install vista and upgrade to Windows 7 64-Bit ntoskrnl.exe BSOD when trying to sleep windows the Windows 7 64-Bit ntoskrnl.exe BSOD when trying to sleep sleep function works fine but after I install all my software it glitches I have tried installing the software and updates one at a time to figure out what it wrong but it seems that it happens at different times each time so I have been unable to figure out what is the problem I have attached my dump files Help is much needed and appreciated

A:Windows 7 64-Bit ntoskrnl.exe BSOD when trying to sleep

Welcome your problem seems to be an hp printer driver
usbscan.sys
First make a full anti virus scan
Download and make a full scan with malwarebytes.
Sometimes virus take names of drivers in an attempt to stay hidden
If negative,
Go to the hp site and update driver.

http://www.sevenforums.com/bsod-help-support/249309-windows-7-64-bit-ntoskrnl-exe-bsod-when-trying-sleep.html
Relevancy 93.31%

Hi since a week my laptop cant wake from sleep mode I got a BSOD each time I looked a bit into after ntoskrnl.exe waking from BSOD sleep, solutions for other people but didnt find anything that solved my probleme The sfc scannow didnt reveale any probleme neithere did malwarbites anti-malware I also completely re installed windows but the issue remains Also my computer now takes ages to start compared to before I really hope someone can help me out and if you do thanks in advance Feel free to ask for information I dont really now what is relevant to give you Here are a few minidump BSOD after waking from sleep, ntoskrnl.exe files I BSOD after waking from sleep, ntoskrnl.exe opened with who crashed On Wed GMT your computer crashed crash dump file C WINDOWS Minidump - - dmp This was probably caused by the following module ntoskrnl exe nt x DCA Bugcheck code x F x xFFFFE EFD xFFFFD xFFFFE C EE Error DRIVER POWER STATE FAILURE file path C WINDOWS system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System Bug check description This bug check indicates that the driver is in an inconsistent or invalid power state BSOD after waking from sleep, ntoskrnl.exe This appears to be a typical software driver bug and is not likely to be caused by a hardware problem The crash took place in the Windows kernel Possibly this problem is caused by another driver that cannot be identified at this time On Wed GMT your computer crashed crash dump file C WINDOWS Minidump - - dmp This was probably caused by the following module ntoskrnl exe nt x DCA Bugcheck code x F x xFFFFE FCD F xFFFFD xFFFFE B E Error DRIVER POWER STATE FAILURE file path C WINDOWS system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System Bug check description This bug check indicates that the driver is in an inconsistent or invalid power state This appears to be a typical software driver bug and is not likely to be caused by a hardware problem The crash took place in the Windows kernel Possibly this problem is caused by another driver that cannot be identified at this time NB here I tried to install intel rapid storage technology didnt go well So I removed it On Tue GMT your computer crashed crash dump file C WINDOWS Minidump - - dmp This was probably caused by the following module iastora sys iaStorA x D Bugcheck code x F x xFFFFE F xFFFFF EF B xFFFFE B Error DRIVER POWER STATE FAILURE file path C WINDOWS system drivers iastora sys product Intel Rapid Storage Technology driver company Intel Corporation description Intel Rapid Storage Technology driver - x Bug check description This bug check indicates that the driver is in an inconsistent or invalid power state This appears to be a typical software driver bug and is not likely to be caused by a hardware problem A third party driver was identified as the probable root cause of this system error It is suggested you look for an update for the following driver iastora sys Intel Rapid Storage Technology driver - x Intel Corporation Google query Intel Corporation DRIVER POWER STATE FAILURE On Mon GMT your computer crashed crash dump file C WINDOWS Minidump - - dmp This was probably caused by the following module ntoskrnl exe nt x DCA Bugcheck code x F x xFFFFE FA xFFFFD xFFFFE E Error DRIVER POWER STATE FAILURE file path C WINDOWS system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System Bug check description This bug check indicates that the driver is in an inconsistent or invalid power state This appears to be a typical software driver bug and is not likely to be caused by a hardware problem The crash took place in the Windows kernel Possibly this problem is caused by another driver that cannot be identified at this time

A:BSOD after waking from sleep, ntoskrnl.exe

Please upload your Dumpfiles with this tutorial Blue Screen of Death (BSOD) Posting Instructions.

So the BSOD specialist can help you.

http://www.eightforums.com/bsod-crashes-debugging/42936-bsod-after-waking-sleep-ntoskrnl-exe.html
Relevancy 93.31%

I already checked the other threads for my specific problem and I couldn't find it although I spent several hours looking for the problem on the interwebz I've been putting my computer to sleep go to bed to fault seems Ntoskrnl be during sometime sleep, BSOD at and when I wake up I often find that the computer has BSOD'd sometime during the night I have never actually seen the BSOD happen From what I have seen of other people's problems with this people typically have a bad hard drive or memory issues This is not the case for me I have already run several hard disk checks with WD's software and I ran memtest overnight neither BSOD sometime during sleep, Ntoskrnl seems to be at fault returned a single error I thought there might be an issue with the computer switching from sleep mode to hibernate so I changed the delay between going to sleep and switching to hibernate to about three days The issue persists At this BSOD sometime during sleep, Ntoskrnl seems to be at fault point I seem to have exhausted the knowledge BSOD sometime during sleep, Ntoskrnl seems to be at fault of the forums so I am attaching my SF diagnostic If you need any more information I would be happy to oblige

A:BSOD sometime during sleep, Ntoskrnl seems to be at fault

It looks like your problem is being caused by your wireless driver:


Code:
Unable to load image \SystemRoot\system32\DRIVERS\NETwNs64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for NETwNs64.sys
*** ERROR: Module load completed but symbols could not be loaded for NETwNs64.sys
\Driver\NETwNs64
Please update the driver from here: https://downloadcenter.intel.com/Default.aspx

http://www.sevenforums.com/bsod-help-support/301385-bsod-sometime-during-sleep-ntoskrnl-seems-fault.html
Relevancy 93.31%

For the past month I have been randomly getting BSOD when my computer wakes up from sleep My first crash was days after install and now it happens every - days Usually just once and I can never seem to replicate But it happens only when the comp is waking up never when in use I have tried to induce it by sleep wake repeatedly but it happens totally randomly I typically don't leave my computer on for prolonged periods so I can't say it wouldn't do this after being turned on for days but I have yet to have a crash like that My system is overclocked watercooled and had been running stable with Vista x since it was built in Jan I installed Win X Ultimate on July So far I have on Wakeup BSOD Sleep from ntoskrnl tried Reinstalling chipset and updating all USB pheripheral drivers Update video and sound drivers Uninstalling all windows updates Removed one and disabled crossfire Full repair of windows not clean install Overnight memtest passes Prime multithread hours with no failures Last Night I tried Updating chipset again bios and raid firmware Disconnecting my UPS from the USB port I am at a loss for what is causing this I've seen a few threads around with ntoskrnl issues but none that happen only on wake up Tonight I plan to do some PSU testing Does anyone have any ideas about this mini dump file is attached Here is what I have taken from the event viewer for the most recent crash lt Event xmlns quot http schemas microsoft com win ntoskrnl BSOD on Wakeup from Sleep events event quot gt - lt System gt lt Provider Name quot Microsoft-Windows-Kernel-Power quot Guid quot C B A- - C -AC E- C D B quot gt lt EventID gt lt EventID gt lt Version gt lt Version gt lt Level gt lt Level gt lt Task gt lt Task gt lt Opcode gt lt Opcode ntoskrnl BSOD on Wakeup from Sleep gt lt Keywords gt x lt Keywords gt lt TimeCreated SystemTime quot - - T Z quot gt lt EventRecordID gt lt EventRecordID gt lt Correlation gt lt Execution ProcessID quot quot ThreadID quot quot gt lt Channel gt System lt Channel gt lt Computer gt Desktop lt Computer gt lt Security UserID quot S- - - quot gt lt System gt - lt EventData gt lt Data Name quot BugcheckCode quot gt lt Data gt lt Data Name quot BugcheckParameter quot gt x lt Data gt lt Data Name quot BugcheckParameter quot gt xfffffa c lt Data gt lt Data Name quot BugcheckParameter quot gt xfffffa c lt Data gt lt Data Name quot BugcheckParameter quot gt x lt Data gt lt Data Name quot SleepInProgress quot gt false lt Data gt lt Data Name quot PowerButtonTimestamp quot gt lt Data gt lt EventData gt lt Event gt

A:ntoskrnl BSOD on Wakeup from Sleep

You could try replacing your ntoskrnl with mine from here But mine is a newer version ntoskrnl Driver power state failure

http://www.sevenforums.com/drivers/24408-ntoskrnl-bsod-wakeup-sleep.html
Relevancy 93.31%

Only happens after waking up from sleep Doesn t happen all the sleep ntoskrnl.exe up BSOD waking from after time but would still like someone s help Thank you SFC Scannow Microsoft Windows Version Copyright c Microsoft Corporation All rights reserved C Windows system gt SFC SCANNOW Beginning system scan This process will take some time Beginning verification phase of system scan Verification complete Windows Resource Protection found corrupt files but was unable to fix some of them Details are included in the CBS Log windir Logs CBS CBS log For example C Windows Logs CBS CBS log Dump File - - dmp Crash Time PM Bug Check String CRITICAL OBJECT TERMINATION Bug Check Code x f Parameter Parameter fffffa a fb Parameter fffffa a fe Parameter fffff fd Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe efc File Description NT Kernel amp System BSOD after waking up from sleep ntoskrnl.exe Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win sp gdr - Processor x Crash Address ntoskrnl exe efc Stack Address Stack BSOD after waking up from sleep ntoskrnl.exe Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File BSOD after waking up from sleep ntoskrnl.exe Size Windows Ultimate -bit Build Service Pack win sp gdr - CPU Intel R Core TM i - CPU GHz CPUs GHz Video Card AMD Radeon HD MotherBoard Gigabyte H MA-D V F Power Supply - brand amp wattage OCZ W nbsp

A:BSOD after waking up from sleep ntoskrnl.exe

"Only happens after waking up from sleep"... This usually has something to do with the video card driver. Try re-installing or updating the Radeon driver
 

http://www.techspot.com/community/topics/bsod-after-waking-up-from-sleep-ntoskrnl-exe.186375/
Relevancy 93.31%

I'm getting random Blue Screens and can't figure out why. I'm not running any hardcore programs. I'm mostly just using Microsoft Office and Firefox. The BSOD's seem to happen when I'm in Outlook, Excel or Firefox. Haven't been able to determine exactly which at the time as I'm moving back and forth between them quite often.

I've tried the SFC command and it didn't find anything. I used BlueScreenViewer but not a lot of help. All drivers for sound and video have been updated. I've also updated the firmware to the Crucial M4 SSD version 040H.

Any insight would be great.

Specs:
Laptop - HP EliteBook 8560w
CPU - Intel i7-2670QM
RAM - Hynix/Hyundai 8.0 GB Ram
SSD - M4-CT256M4 SSD
Audio - AMD High Definition Audio
Video - AMD FirePro M5950
OS - Windows 7 Pro 64-bit

A:Random BSOD Reporting ntoskrnl.exe+75c40 & ntoskrnl.exe+7efc0

Update the firmware of your Crucial M4-CT256M4SSD2.

And, Uninstall McAfee Using McAfee Removal Tool. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.
Download, install and update those, and then run full system scans with both of them, one by one.

Free up the startup.
Click on the Start button
Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the “Startup” tab.
Deselect all items other than the antivirus and touchpad driver SynTPEnh.
Apply > OK
Accept then restart.
Let us know the results.

http://www.sevenforums.com/bsod-help-support/281927-random-bsod-reporting-ntoskrnl-exe-75c40-ntoskrnl-exe-7efc0.html
Relevancy 93.31%

i keep getting BSOD when playing game new graphics i dont know where to start when its comes to BSOD stuff

110414-10576-01.dmp 11/4/2014 10:48:39 PM 0x00000124 00000000`00000000 fffffa80`0af318f8 00000000`00000000 00000000`00000000 ntoskrnl.exe ntoskrnl.exe+4a63cc NT Kernel & System Microsoft? Windows? Operating System Microsoft Corporation 6.1.7600.16385 (win7_rtm.090713-1255) x64 ntoskrnl.exe+4a63cc C:\Windows\Minidump\110414-10576-01.dmp 6 15 7600 262,144 11/4/2014 10:48:41 PM is some info i dont know what else yall need

A:0x00000124 ntoskrnl.exe ntoskrnl.exe+4a63cc BSOD Error runninganygame

Please Help

http://www.sevenforums.com/bsod-help-support/351242-0x00000124-ntoskrnl-exe-ntoskrnl-exe-4a63cc-bsod-error-runninganygame.html
Relevancy 93.31%

Jan , Crash Address All !! BSOD ntoskrnl.exe+80640 the Time ntoskrnl.exe ------------------------------------------- How to Solve - I've uninstalled my windows and recover my laptop with recovery DVD to it's original factory state original windows - Never installed Norton internet security again I'm using Microsoft Security Essentials now - Updated my Graphic Card Driver Intel Wifi Driver Sound Card Driver And some other drivers It's been two months now with no BSOD Thanks to dear Arc and gregrocker Thank you guys ------------------------------------------- Oct ------------------------------------------- Hi guys It's almost a year that I have problems with BSOD ntoskrnl.exe , All the Time !! Crash Address ntoskrnl.exe+80640 BSODs it use to be Atikmdag BSOD but I solve that with updating my Graphic card Driver and Changing Atikmdag sys file in Windows System folder But now it's about months that I get ntoskrnl exe BSODs in lot's of situations Web surfing Windows log on Working with Unity Working with files and Really lot's of Times Even in Safe Mode with Networking I guess it's because of my Network driver because I got BSOD in Safe Mode with Network but I never got a BSOD in normal Safe mode BTW I dunno how to solve it Please Help me these BSODs are sooooooooo annoying Here is my System Specs It's Msi GX CPU Intel R Core TM i CPU M GHz Main MICRO-STAR INTERNATIONAL CO LTD MS- Bios BIOS Date Ver Memory GB HDD ST AS ATA Device Sound Card AMD High Definition Audio Device High Definition Audio Device Graphic ATI Mobility Radeon HD Series - GB GDDR OS Microsoft Windows Ultimate -bit Multiprocessor Free Service Pack it's weird that I've finished writing this without a BSOD Here is the Zip file Created with SF Diagnostic Tool

A:BSOD ntoskrnl.exe , All the Time !! Crash Address ntoskrnl.exe+80640

Code:
fffff800`00b9cc48 fffff880`010b75fcUnable to load image \SystemRoot\System32\Drivers\sptd.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for sptd.sys
*** ERROR: Module load completed but symbols could not be loaded for sptd.sys
sptd+0x4b5fc
Daemon Tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known BSOD causer. Uninstall Alcohol 120% at first. Then download SPTD standalone installer from Disk-Tools.com, and execute the downloaded file as guided below :
Double click to open it.
Click this button only:

If it is grayed out, as in the picture, there is no more SPTD in your system, and you just close the window.
Next uninstall Virtual CloneDrive, as vclone.sys is as fatal as SPTD.sys, too.
After doing these two, report the situation back.

http://www.sevenforums.com/bsod-help-support/309093-bsod-ntoskrnl-exe-all-time-crash-address-ntoskrnl-exe-80640-a.html
Relevancy 93.31%

Got my first blue screen of death tonight had firefox opened one watching youtube video another browsing internet After bsod /adress (ntoskrnl.exe+72a40) caused by driver (ntoskrnl.exe) BSOD it restarted i login but just black screen with cursor ctrl alt delete worked so i shut my computer down Boot up normally after check my minidump file bsod cause BSOD caused by driver (ntoskrnl.exe) /adress (ntoskrnl.exe+72a40) by ntoskrnl exe Did little search on google find BSOD caused by driver (ntoskrnl.exe) /adress (ntoskrnl.exe+72a40) has to do with ram and hard drive Downloaded wd data life guard diagnostic for my mechanic drive which is healthy but my ssd on shows failed end to end error rate value threshold worst is all in SMART statue Im not sure if i can trust this wd diagnostic on my crucial ssd there are alot of unknown in SMART statue too Theres no ssd diagnotic for crucial there is a firmware not sure if it helps So i downloaded and ran crystaldiskinfo on my ssd health statues says good it doesnt say end to end error rate like wd Instead same ID B line says quot unused reserve nand blocks quot instead Is my ssd good i havent ran a test on my ram yet This is almost month old build Asrock x x killer i k gtx w crucial x gb crucial gb ssd wd blue tb Heres info of bsod with bluescreenview Bug Check String- IRQL GT ZERO AT SYSTEM SERVICE Bug Check Code - x a Parameter - dc a Parameter - Parameter - Parameter - fffff b Caused By Driver- ntoskrnl exe Caused By Address- ntoskrnl exe a File Description- NT Kernel amp System

A:BSOD caused by driver (ntoskrnl.exe) /adress (ntoskrnl.exe+72a40)

Blue Screen of Death (BSOD) Posting Instructions

http://www.sevenforums.com/bsod-help-support/367819-bsod-caused-driver-ntoskrnl-exe-adress-ntoskrnl-exe-72a40.html
Relevancy 93.31%

BSOD random, probably under heavy load situations. I dont know how to do.


DM log collector file attached

many thanks

A:BSOD random most times ntoskrnl.exe+748c0 and ntoskrnl.exe+74ec0

Hi berdini.


Code:
DEFAULT_BUCKET_ID: GS_FALSE_POSITIVE_MISSING_GSFRAME
Scan the system for possible virus infection with the following programs.
Anti-rootkit utility TDSSKiller
Windows Defender Offline
Let us know the results.
____________________________________

Code:
BugCheck F7, {fffff8800a01ff08, f8800125d135, ffff077ffeda2eca, 0}

Probably caused by : Ntfs.sys ( Ntfs!_report_gsfailure+26 )

Followup: MachineOwner
---------

http://www.sevenforums.com/bsod-help-support/373211-bsod-random-most-times-ntoskrnl-exe-748c0-ntoskrnl-exe-74ec0.html
Relevancy 93.31%

Hi to make things easier for you dxgmms1.sys,ntoskrnl.exe,Ntfs.sys BSOD Address:ntoskrnl.exe+75bc0; below is the Bug Check String Driver and crash address SYSTEM SERVICE EXCEPTION dxgmms sys ntoskrnl exe bc MEMORY MANAGEMENT ntoskrnl exe ntoskrnl exe bc SYSTEM SERVICE EXCEPTION ntoskrnl exe ntoskrnl exe bc NTFS FILE SYSTEM Ntfs sys ntoskrnl exe bc IRQL NOT LESS OR EQUAL ntoskrnl exe ntoskrnl exe bc unrelated how could I make nice table above I have searched the forum Problem BSOD randomly usually graphics related eg flash games in chrome graphics related software Mathematica Problem I use an internet usb G device to connect to internet Every morning the device will not connect to internet and computer will hang on shutting down screen when I BSOD Address:ntoskrnl.exe+75bc0; dxgmms1.sys,ntoskrnl.exe,Ntfs.sys restart I have to manually turn off and back on again I think this may be a dying capacitor on motherboard that needs boot's to get excited Problem Chrome quot aw snap quot happens regularly and is usually flash content related even ad banners seem to cause it from time to time I have reinstalled chrome checked plugins etc etc no luck Internet explorer runs stable but for example in flash games it seems to momentarily freeze and then catch up BSOD Address:ntoskrnl.exe+75bc0; dxgmms1.sys,ntoskrnl.exe,Ntfs.sys with itself again These are moments where I think chrome would have crashed Things I've done SFC scan All's well Memtest I did pass it took an hour everything fine Will put it on over night tonight Checked for latest drivers Also have latest BIOS Checked win update Ran Intel Burn everything ok max stress over Gb RAM run min max temp thank you Noctua NH-C P this is with quiet adaptor too lol Ran malwarebytes found nothing toxic Ran SSDlife Free health SSD seems fine Bought a new motherboard assuming that the current one is going bad I haven't switched over to it yet and thought I should investigate a little further before I do ie bad RAM CPU Power Supply SSD CPU seems fine RAM passed test but will test further My own quot opinion quot until today was that there is a fault on motherboard probably with usb hardware Now I realise that it could be the power supply but I have no way to test this bar buy a new one My analysis bad motherboard or bad PSU Either way not getting away with cheap fix methinks UPDATE I enabled verifier exe using this Driver Verifier - Enable and Disable Windows crashes just before going to desktop I had to boot last known config to get up and running again IE I CAN RELIABLY CREATE BSOD USING VERIFIER EXE WITH GIVEN INSTRUCTIONS So I am going to try focusing on drivers loaded at startup by process of elimination Is there a quick way to find out which one Below is the Check String Driver and crash address for the BSOD's when using verifier exe IRQL NOT LESS OR EQUAL ntoskrnl exe ntoskrnl exe bc DRIVER IRQL NOT LESS OR EQUAL RNDISMPX SYS RNDISMPX SYS a UPDATE If I choose or more non Microsoft drivers in verifier exe I get BSOD different check strings but always at the same address Also computer seems more unstable since engaging with verifier exe I feel I have given a thorough evaluation based on information in this forum and would appreciate feedback from those with more expertise than I UPDATE Another Memtest gave errors on pass Questions any chance poor power supply can cause this anyone have experience increasing voltage to make this go away would bad RAM explain all my problems ok fine i'll go through RAM and the slots and find the bad one sigh major sigh positively tragic sigh UPDATE Started with slot with stick of RAM Did memtest but had an idea I turned on verifier exe with all rd party drivers selected and my theory was to replicate the BSOD I got earlier at startup Went through each slot each RAM combo's of RAM and then to add insult to injury with all sticks in exactly same as before no BSOD Life is tough So maybe RAM wasn't properly seated all this time or maybe I need to test the RAM proper... Read more

A:BSOD Address:ntoskrnl.exe+75bc0; dxgmms1.sys,ntoskrnl.exe,Ntfs.sys

**************UPDATE 5 ****************




The sequence of events went as follows.
RAM test 1 pass was passed. Verifier.exe caused immediate BSOD on windows start when activated. Trying to hunt down drivers revealed any combo of 3 or more drivers gave BSOD at startup. Randomly decided to recheck RAM. Failed memtest after 27 minutes pass 1. Found one RAM stick that passed after one pass slot0. Got fed up of waiting for other slot's. Devised a plan to use verifier to check the RAM by seeing which combo's of RAM sticks gave BSOD on startup. All combo's passed. And now verifier does not give BSOD on any setting. Began to hate life. Cheered myself up with prospect of sleep. Put all 16 Gb RAM in properly and ran mentest for 18 hours, 6 passes. No error. Still no verifier.exe errors when enabled. Wrote this update.


If RAM failed after 27min one test, and then after swapping around a retest of 18 hours has no error, one would presume the RAM may be ok. Equally, I believe one could say the RAM is suspect. So, if the test is failed it really doesn't tell us anything except there is a problem somewhere. But we know there is a problem since we have BSOD!!! If I hadn't rerun the test I wouldn't question the RAM.

So the question is: how do I categorically ensure that a stick of RAM is good? Is memtest on RAM with an alternative working computer enough?



In summary:

I ran memtest for 18 hours, which was 6 passes. No problems detected. Using verifier.exe with protocols given on this forum I no longer get BSOD.

Currently my hypothesis is that the RAM was never seated correctly, or given that it takes a bit of force to insert correctly into motherboard, the flexing has at least temporarily defused whatever fault was causing my BSOD. Tenuous I know. But I really have no other explanation other than something somewhere on the motherboard or power is failing, or even the RAM.

http://www.sevenforums.com/bsod-help-support/351171-bsod-address-ntoskrnl-exe-75bc0-dxgmms1-sys-ntoskrnl-exe-ntfs-sys.html
Relevancy 92.02%

Every time I close my laptop and put it in sleep mode then I attempt to wake it my laptop gets a BSOD. I don't actually see the blue screen when I open the laptop I have to boot it up again by pressing the power button. All drivers are up to date. I really have no idea what is causing the problem. Attached are my dump files.

A:BSOD in sleep mode ntoskrnl DIRVER_POWER_STATE_FAILURE

Files missing, no system specs

http://www.sevenforums.com/bsod-help-support/253601-bsod-sleep-mode-ntoskrnl-dirver_power_state_failure.html
Relevancy 92.02%

Computer keeps BSOD after trying to wake it from sleep mode, or even if the monitor just powers off via power save options. Installed latest video drivers and windows updates to no avail. Thanks in advance for the help!

A:BSOD after sleep mode ntoskrnl.exe+7f1c0

hi
The last dump refers to msahci.sys... which is related to you Hard Dirve..

Check you bios to see if it is set to AHCI ...

http://www.sevenforums.com/bsod-help-support/244004-bsod-after-sleep-mode-ntoskrnl-exe-7f1c0.html
Relevancy 92.02%

Hi all,

Recently I seem to be getting recurring BSOD with sleep mode (or that's my guess). I've attached the log files. Any help is appreciated


computer name: SEAN-VAIO
windows version: Windows 7 Service Pack 1, 6.1, build: 7601
windows dir: C:\Windows
CPU: GenuineIntel Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz Intel586, level: 6
4 logical processors, active mask: 15
RAM: 8501669888 total
VM: 2147352576, free: 1916964864

A:BSOD during sleep mode ntoskrnl.exe (nt+0x8207A)

Welcome aboard.

Code:
...................
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1000009F, {4, 258, fffffa8007338040, fffff80000b9c3d0}

*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : memory_corruption

Followup: memory_corruption
---------
As all the dumps indicating the same thing, We may go for some memory test.
RAM - Test with Memtest86+

At the same time, let us enable driver verifier.
Driver Verifier - Enable and Disable

► Update the following drivers.
Realtek High Definition Audio : Driver Reference Table - RTKVHD64.sys
Bluetooth Audio : Driver Reference Table - btmaud.sys
AMD Radeon(TM) HD 6630M : Driver Reference Table - atikmpag.sys
► Please get rid of these programs. Those are not any good, but problems actually.

Auslogics Boot Soeed. Not needed at all.
McAfee : replace by Microsoft Security Essentials - Free Antivirus for Windows
K Lite Codec packs : Replace by Shark007's FREE Codec solutions - Windows 7 codecs
Quick Time :Replace by Free-Codecs.com | QuickTime Alternative 3.2.2

Let us know how these went.

http://www.sevenforums.com/bsod-help-support/251897-bsod-during-sleep-mode-ntoskrnl-exe-nt-0x8207a.html
Relevancy 92.02%

Hi,
I need help. My Lenovo U310 is crushing with BSOD every time I wake him up from sleep.
Here are reports from my laptop.

Thanks for any help.
Kaper

A:BSOD W8 when wake up from sleep ntoskrnl.exe (nt+5a440)

Update Intel storage driver to newest, from Intel.com:


Code:
iaStorA iaStorA.sys Mon Jul 09 16:42:33 2012 (4FFB4239)


This should be updated from Lenovo, but good luck finding it lol:


Code:
LhdX64 LhdX64.sys Mon Jan 11 10:06:58 2010 (4B4B3E92)


Contact customer service if you must.

If you still need guidance after those things, that guidance is to uninstall AVG. Set Windows Firewall + Windows Defender to Automatic.

http://www.eightforums.com/bsod-crashes-debugging/40115-bsod-w8-when-wake-up-sleep-ntoskrnl-exe-nt-5a440.html
Relevancy 92.02%

Hello, Newbie here!

For the past few weeks I've been coming home to find my laptop has shut itself down. When I reboot it tells me it recovered from a blue screen.

I have not witnessed the blue screen while working--I only find it has shut down when I've been away. Fan seems to run a lot, but this might be normal. 3 year old HP Pavilion dm4 laptop running Windows 7 Home Premium 64 bit.

Attached is my error file from DM Log Collector.

Any help would be appreciated!

Wendy

A:Frequent BSOD (mostly during sleep) ntoskrnl.exe+f2124

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {fffffa80413d5178, 2, 1, fffff80002cd0fe5}

*** WARNING: Unable to verify timestamp for npf.sys
*** ERROR: Module load completed but symbols could not be loaded for npf.sys
Probably caused by : npf.sys ( npf+2bb2 )

Followup: MachineOwner
---------

1: kd> lmvm npf
start end module name
fffff880`05904000 fffff880`05910000 npf T (no symbols)
Loaded symbol image file: npf.sys
Image path: \??\C:\Windows\system32\drivers\npf.sys
Image name: npf.sys
Timestamp: Sat Jun 26 02:20:58 2010 (4C24DE72)
CheckSum: 00011844
ImageSize: 0000C000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
The problem is common on systems using a NetGear router with outdated firmware.

See this thread for the solution:
Computer Crashed when I wasn't around it.

http://www.sevenforums.com/bsod-help-support/360529-frequent-bsod-mostly-during-sleep-ntoskrnl-exe-f2124.html
Relevancy 92.02%

I re installed my laptop a few weeks ago and installed all the HP Envy drivers recommended, when this problem started appearing. So I'm assuming it's driver related but I have no idea which.

I never get BSODs during normal use, but when I leave the laptop unattended and it goes into sleep mode, it might or might not BSOD with "DRIVER_POWER_STATE_FAILURE" or "DRIVER_IRQL_NOT_LESS_OR_EQUAL". It happens only like 20% of the time, seemingly at random.

Thanks in advance!

A:Random BSOD when laptop tries to sleep (ntoskrnl.exe)

Welcome to SevenForums.

Kaspersky antivirus is causing BSOD-s for you. Please uninstall it and use Microsoft Security Essentials at least to test.

Code:
STOP 0x000000D1: DRIVER_IRQL_NOT_LESS_OR_EQUAL
Usual causes: Device driver
BugCheck D1, {0, 2, 8, 0}
*** WARNING: Unable to verify timestamp for klim6.sys
*** ERROR: Module load completed but symbols could not be loaded for klim6.sys
Probably caused by : klim6.sys ( klim6+28f0 )
...
fffff800`00b9b768 fffff880`04bb411dUnable to load image \SystemRoot\system32\DRIVERS\kneps.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for kneps.sys
*** ERROR: Module load completed but symbols could not be loaded for kneps.sys
kneps+0x311d
Removal tool for Kaspersky Lab products
Recommended antivirus program for Windows 7 based on stability compared to others:-
Microsoft Security Essentials - Free Antivirus for Windows
Microsoft Security Essentials Download | Free Spyware Protection
Malwarebytes - The Free version
Good and Free system security combination.
Do not start the free trial of Malware Bytes; remember to deselect that option when prompted.

Run a full scan with both (separately) once downloaded, installed and updated.

Update your graphic card drivers to their latest. Click on the Start ► Control Panel ► Programs ► Uninstall a program ► Uninstall everything related to; ATI. Reboot the computer if you are prompted.

Download and install drivers from the link below: (Choose custom install and avoid CCC - Catalyst control center) during installation.Download AMD Catalyst Drivers 12.10 Vista 64 - FileHippo.com

Update Intel Graphics Drivers:Source: Driver Reference TableUpdate Applian Network Service/Applian Technologies APPLIAND helper driversSource: Driver Reference TableUpdate Intel? Wireless WiFi Link Adapter drivers:Source: Driver Reference TableCheck if enabling or disabling USB selective suspense helps:USB Selective Suspend - Turn On or Off
Run the System File Checker that scans the of all protected Windows 7 system files and replaces incorrect corrupted, changed/modified, or damaged versions with the correct versions if possible:
Click on the
Type CMD on Search
Left click and Run as Administrator
Type SFC /scannow
Full tutorial here:SFC /SCANNOW Command - System File Checker
Run Disk Check on your hard disk for file system errors and bad sectors on it:Disk Check
Free up the start-up, nothing except the antivirus is usually needed.Startup Programs - Change
Troubleshoot Application Conflicts by Performing a Clean Startup
Let us know the results.
Good luck

http://www.sevenforums.com/bsod-help-support/264820-random-bsod-when-laptop-tries-sleep-ntoskrnl-exe.html
Relevancy 92.02%

Hi all,

I've been getting BSODs now and then for quite a while now since building my PC, when it wakes up from sleep.

I've decided to do a clean reinstall of Windows 7 Professional 64bit last week to see if that helped, but alas its back

My drivers are all up to date, and my RAM sticks are fine, along with my HDD after doing tests. Its just almost frustrating when I leave my PC to sleep, and it decides to BSOD or even just restart on wake.

I've attached the dumps, and thanks in advance guys!

A:BSOD On Wake up from Sleep - Ntfs.sys and ntoskrnl.exe

  
Quote: Originally Posted by MuadhC


and my RAM sticks are fine,


We need to know, because there is enough reason to suspect the RAM.

Code:
BugCheck A, {ffffe8000aea6fc3, 2, 1, fffff800034955d9}

*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : memory_corruption

Followup: memory_corruption
---------
Test your RAM modules for possible errors. How to Test and Diagnose RAM Issues with Memtest86+
Run memtest86+ for at least 8 consecutive passes.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

If it does not show any error, enable Driver Verifier to monitor the drivers. Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.



   Information
Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.



   Warning
Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.



   Tip

If you fail to get on the Desktop because of DV, Boot into Advanced Boot Options > Safe mode. Disable DV there. Now boot normally again, and try following the instruction of enabling DV again.
If you cannot boot in Safe mode too, do a System Restore to a point you made earlier.

Let us know the results, with the subsequent crash dumps, if any.

http://www.sevenforums.com/bsod-help-support/352992-bsod-wake-up-sleep-ntfs-sys-ntoskrnl-exe.html
Relevancy 92.02%

Hello,

As far as I can tell, this BSOD only occurs about 5-10 minutes after I wake the comp from sleep.

Started to happen after I upgraded the graphics card.

Things I have tried:
- uninstall old graphics drivers and install new
- registry cleanup with CCleaner

Any help would be appreciated.

A:BSOD after wake from sleep, DRIVER_POWER_STATE_FAILURE, ntoskrnl.exe

Hello volteic, Welcome to SF

Had a look at your dumps and they look pretty concise, both dumps are related to usb problems
Both dumps are 0x9f errors driver power state failure BSOD Index and are blaming aicharger.sys driver which is an Asus charger driver Driver Reference Table - AiCharger.sys try updating it or for testing remove it

Also have a look at this USB Selective Suspend - Turn On or Off

Any problems post back and if you suffer more dumps please upload the new dump files

Hope this helps
Paul

http://www.sevenforums.com/bsod-help-support/284421-bsod-after-wake-sleep-driver_power_state_failure-ntoskrnl-exe.html
Relevancy 91.16%

I just built this computer a couple months ago and have been having random bluescreens Sometimes it's when I'm just browsing the internet the usb bus will stop responding for a couple seconds then the computer will freeze After about minutes sleep, from Address:ntoskrnl.exe Restoring +e58c2 BSOD it will return a blue screen The other more repeatable case is when I restore from sleep about of the time it will bluescreen This seems to be after it has had a chance to sit for a BSOD Restoring from sleep, Address:ntoskrnl.exe +e58c2 couple hours If I try to brute force a bunch of sleep restores it doesn't do it I have ran mem test chk disk uninstall patch kb per this post turned on driver verifier per this post When I turned that on it seemed to freeze more often but did not bluescreen no matter how long I waited I've updated my bios my video card drivers my usb drivers all to no avail I've searched the forums diligently here and haven't been BSOD Restoring from sleep, Address:ntoskrnl.exe +e58c2 able to find much conclusive about this error beyond it could be a hardware error and some people resolve BSOD Restoring from sleep, Address:ntoskrnl.exe +e58c2 it by reformatting I have reformatted albeit I installed the same drivers and the problem persists I have attached of my dumps you'll notice that of them have other errors hidusb sys and mrxsmb sys I am assuming these are coincidental as the ntoskrnl exe is common among all of them I would very much appreciate it if someone would take a moment to examine these and shed some light onto my issue While I've mentioned my troubleshooting steps above I am more than willing to repeat any of these steps in an effort to debug this issue Thank you Dave

A:BSOD Restoring from sleep, Address:ntoskrnl.exe +e58c2

Hello davet111.

The BSOD is caused by the Logitech USB Video Class Driver (WebCam).

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa800d4664a0, fffff80000b9c3d8, fffffa80159569b0}

*** WARNING: Unable to verify timestamp for lvuvc64.sys
*** ERROR: Module load completed but symbols could not be loaded for lvuvc64.sys
Probably caused by : lvuvc64.sys

Followup: MachineOwner
---------

Code:
Args: 00000000 00000000 00000000 00000000
[ 16, 0] 0 0 fffffa800d4664a0 00000000 fffff88006285fd4-fffffa800cfa9580
\Driver\usbccgp ks!CKsDevice::CompleteDevicePowerIrp
Args: 00000000 00000000 00000000 00000002
>[ 16, 2] 0 1 fffffa80120ca990 00000000 00000000-00000000 pending
\Driver\LVUVC64
Args: 00041100 00000001 00000001 00000002
[ 16, 2] 0 e1 fffffa801420d060 00000000 00000000-00000000 pending
\Driver\ksthunk
Args: 00041100 00000001 00000001 00000002
[ 0, 0] 0 0 00000000 00000000 00000000-fffffa80152c9930

Args: 00000000 00000000 00000000 00000000
The driver seems to be a bit old.

Code:
fffff880`0ee19000 fffff880`0f2a2300 lvuvc64 T (no symbols)
Loaded symbol image file: lvuvc64.sys
Image path: lvuvc64.sys
Image name: lvuvc64.sys
Timestamp: Sat Sep 22 00:33:12 2012 (505CB9F0)
CheckSum: 0048F35A
ImageSize: 00489300
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Try to search for updates from Logitech Support - Downloads, Manuals, FAQs & More . If no updates are found, disable the device. Enable it when it needs.

And, Disable USB Selective Suspend too.
USB Selective Suspend - Turn On or Off

Let us know the results.

http://www.sevenforums.com/bsod-help-support/298027-bsod-restoring-sleep-address-ntoskrnl-exe-e58c2.html
Relevancy 91.16%

Hi,

I'm haveing some problems with my HTPC, when its going to sleep mode it usually gets a bsod, either right away or during the night.

I have all windows updates applied, i have updated the drivers, updated my ocz agility with newest firmware, tried other ram's also.

I have also tried reinstalling windows without success.

Would realy appriciate if anyone could give me some hints on whats causing this.

A:BSOD when the HTPC is in sleep mode ntoskrnl.exe+7f1c0

Hello Ray and welcome to Sevenforums.

SFC /scannow
We usually ask people to do this command to check if Windows is corrupted. It's the most common used one to check if the Windows files are corrupted. If it'll find errors, it'll restore them.



   Tip
If you're having a custom customization layer on your Aero, it's likely to get restored to default.
Press Start | search 'cmd' | Right-click it
| open as Admin | type SFC /SCANNOW

SFC /SCANNOW Command - System File Checker

Best Regards,
Frederik.

http://www.sevenforums.com/bsod-help-support/248880-bsod-when-htpc-sleep-mode-ntoskrnl-exe-7f1c0.html
Relevancy 90.73%

Does anyone have any idea what could be causing these BSOD errors? It started with the +74200 error about a month ago (enduser is just now informing IT) and now it is the +73c40. I've already done several Memory tests to no avail. I'm about to just
reimage but don't want to if it's just a driver issue. 

Thanks
TravisD

https://social.technet.microsoft.com/Forums/en-US/afea0b11-7904-4025-8dd6-c76d6cfa02d8/ntoskrnlexe74200-amp-ntoskrnlexe73c40-bsod?forum=w8itprogeneral
Relevancy 90.73%

Hi there,

Recently I've been getting BSOD while playing WoW. I'm not sure what details to give other than the dump so I'll just tell you about my computer:

Intel i5 4690 3.5-3.9 GHZ
EVGA GTX 970 SSC (super superclocked - the fans are designed not to turn on until card reaches 60c)
16gb Hyper X Fury ram
1tb WD Black HDD
Windows 7 OS

I noticed that I haven't crashed yet while EVGA Precision X is up (it has a custom aggressive fan curve I made). Maybe this has to do with the fact that it replaces fan drivers, or something? I don't know. I'm pretty clueless as to what's going on because all these parts are pretty new and it only recently started, but it's crashed three times today. Here are the dumps.
Any help you guys can give would be greatly greatly appreciated. Thanks a ton!
 

A:BSOD ntoskrnl.exe address ntoskrnl.exe+74ec0

Any ideas? It happened again while using EVGA Precision.
 

https://forums.techguy.org/threads/bsod-ntoskrnl-exe-address-ntoskrnl-exe-74ec0.1145229/
Relevancy 90.73%

I keep getting a BSOD (Critical_Object_Termination) but have no idea what is causing the issue. I tried in vain to debug my own minidump files but ended up getting nowhere.

So far i have run MemTest over the weekend with 107 passes. I also ran Prime95 64-bit for 4 hours on each of the FFT tests without error.

I have enabled driver verifier (following the guide on this site) and this has not caused anynew BSOD's.

I also get a random BSOD on startup but it has happened so infrequently i have been unable to boot with disable automatic restart on system failure enabled to capture the stop code.

I really could do with some expert advice please.

This is my first post so i apologise if i have missed something important but i have tried to read as much info as possible before posting.

A:BSOD Ntoskrnl.exe+7efc0 and Ntoskrnl.exe+75c40

Unusual one you got there think it may be a windows problem please run sf tool and upload all files not just dumps and try running an sfc scan
SFC /SCANNOW Command - System File Checker option 2

Check system temperatures also

http://www.sevenforums.com/bsod-help-support/281212-bsod-ntoskrnl-exe-7efc0-ntoskrnl-exe-75c40.html
Relevancy 90.73%

i am having this problem after i change my video cards i upgraded a 460 SLI to a 680
i have run 3dmark11 to try to replicate the bsod or something and nothing happends
i clean my hardware and change the thermal compound then i played some bf3 and paff the same bsod =(

pd: sorry for my english
i forgot to say that i have the last beta drivers from nvidia because with the WHQL i was having problems in gw2
Attachment 231326

A:BSOD playing bf3, hal.dll hal.dll+12a3b , ntoskrnl.exe ntoskrnl.exe+18

Welcome

For the bug check you're getting go through:
Stop 0x124 - what it means and what to try

Also get a latest version of your BIOS.


Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Yusra\Downloads\Fayer\SF_11-09-2012\091112-23509-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
Machine Name:
Kernel base = 0xfffff800`03667000 PsLoadedModuleList = 0xfffff800`038ab670
Debug session time: Wed Sep 12 06:29:05.072 2012 (UTC + 6:00)
System Uptime: 0 days 7:04:57.025
Loading Kernel Symbols
...............................................................
................................................................
................................
Loading User Symbols
Loading unloaded module list
.....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 124, {0, fffffa80086cf028, ba000000, 400405}

*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : hardware

Followup: MachineOwner
---------

5: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa80086cf028, Address of the WHEA_ERROR_RECORD structure.
Arg3: 00000000ba000000, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000000400405, Low order 32-bits of the MCi_STATUS value.

Debugging Details:
------------------
BUGCHECK_STR: 0x124_GenuineIntel

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

PROCESS_NAME: System

CURRENT_IRQL: f

STACK_TEXT:
fffff880`030acb58 fffff800`03630a3b : 00000000`00000124 00000000`00000000 fffffa80`086cf028 00000000`ba000000 : nt!KeBugCheckEx
fffff880`030acb60 fffff800`037f3b03 : 00000000`00000001 fffffa80`0860b890 00000000`00000000 fffffa80`0860b8e0 : hal!HalBugCheckSystem+0x1e3
fffff880`030acba0 fffff800`03630700 : 00000000`00000728 fffffa80`0860b890 fffff880`030acf30 fffff880`030acf00 : nt!WheaReportHwError+0x263
fffff880`030acc00 fffff800`03630052 : fffffa80`0860b890 fffff880`030acf30 fffffa80`0860b890 00000000`00000000 : hal!HalpMcaReportError+0x4c
fffff880`030acd50 fffff800`0362ff0d : 00000000`00000008 00000000`00000001 fffff880`030acfb0 00000000`00000000 : hal!HalpMceHandler+0x9e
fffff880`030acd90 fffff800`03623e88 : 0000003b`5e9a7a72 fffffa80`0ae15ac8 00000000`00000000 00000000`00000000 : hal!HalpMceHandlerWithRendezvous+0x55
fffff880`030acdc0 fffff800`036e4aac : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : hal!HalHandleMcheck+0x40
fffff880`030acdf0 fffff800`036e4913 : 00000000`00000000 00000... Read more

http://www.sevenforums.com/bsod-help-support/252352-bsod-playing-bf3-hal-dll-hal-dll-12a3b-ntoskrnl-exe-ntoskrnl-exe-18-a.html
Relevancy 90.73%

Hello Recently I got a few bluescreens while playing World of Warcraft which I thought was very weird because all of my hardware is pretty new Here is some info about my computer Intel i - GHZ EVGA GTX SSC super superclocked - the fans are designed not to turn on until card reaches c gb Hyper X Fury ram tb WD Black HDD Windows OS At first I noticed three bluescreens then I used EVGA Precision X with a custom aggressive fan profile and BSOD ntoskrnl.exe+74ec0 ntoskrnl.exe address the problem went away temporarily but then the computer crashed later on I'm not sure if that's relevant or not I ran a diagnostic on my harddrive and processor and both were fine The RAM seems more difficult to test because it said something about usb drives so I decied to stray away from that unless it was absolutely necessary and then get help from someone who BSOD ntoskrnl.exe address ntoskrnl.exe+74ec0 knows what they're doing I am going to upload the dump files that were saved by bluescreenview Any help at all would be greatly appreciated

A:BSOD ntoskrnl.exe address ntoskrnl.exe+74ec0

CRITICAL_OBJECT_TERMINATION BSODs (0xf4) are usually related to an issue with the hard drive.

If you have an SSD, make sure that the firmware is upgraded.

If HDD, run SeaTools for DOS, LONG test - Hard Drive (HDD) Diagnostics - Sysnative Forums

Regards. . .

jcgriff2

`

http://www.techsupportforum.com/forums/f299/bsod-ntoskrnl-exe-address-ntoskrnl-exe-74ec0-975273.html
Relevancy 90.73%

Hi, I've been having this BSOD appear very randomly.

IRQL_NOT_LESS_OR_EQUAL 0x0000000a
(all reports in .rar file)

Sometimes within 1 hour, other times as long as 24hrs+. I've got my BIOS/Drivers up to date for my CPU, Graphics Card, and Motherboard. I've rigorously tested my memory and have never had any issues arise.

It has occurred during
3d gaming,
when the system has been idle,
also when browsing with firefox or ie.

Any help at all would be appreciated, I've struggled with this BSOD for years I would love to finally find whats causing it.

Thank you.

A:BSOD ntoskrnl.exe+26ee0 ntoskrnl.exe+7cc40

  
Quote: Originally Posted by postal


Hi, I've been having this BSOD appear very randomly.

IRQL_NOT_LESS_OR_EQUAL 0x0000000a
(all reports in .rar file)

Sometimes within 1 hour, other times as long as 24hrs+. I've got my BIOS/Drivers up to date for my CPU, Graphics Card, and Motherboard. I've rigorously tested my memory and have never had any issues arise.

It has occurred during
3d gaming,
when the system has been idle,
also when browsing with firefox or ie.

Any help at all would be appreciated, I've struggled with this BSOD for years I would love to finally find whats causing it.

Thank you.


First lets start with asacpi.sys yours dated 2005
1-ASACPI.SYS

The pre 2009 version of this driver is a known BSOD cause.

Please visit this link: ASUS teK Computer Inc. -Support- Drivers and Download P7P55D LE
ASUSTeK Computer Inc. -Support- Drivers and Download P7P55D LE

Scroll down to the Utilities category, then scroll down to the "ATK0110 driver for WindowsXP/Vista/Windows 7 32&64-bit" (it's about the 12th item down).
Download and install it.
Go to C:\Windows\System32\drivers to check and make sure that the ASACPI.SYS file is date stamped from 2009 or 2010 (NOT 2005).

http://www.sevenforums.com/bsod-help-support/194256-bsod-ntoskrnl-exe-26ee0-ntoskrnl-exe-7cc40.html
Relevancy 90.3%

Hello all I am looking for help in debugging two issues which I have been getting for the past week I have the system Power Management set up to put the system to Sleep but when it goes to sleep I get a BSOD and the system shut downs When I try to shut down the system via Windows the Shut Down screen appears but the loading icon keeps running and the system never actually shuts down The BSOD Bug Check Code is x f and the Caused by Address is ntoskrnl exe bc I do not get these issues on ntoskrnl.exe+75bc0 ends never on for mode and Sleep Shutdown BSOD a Clean Boot so from what I have read I am guessing it is driver related but I am too novice to determine which driver it is I ran Windows Update and updated a bunch of the other equipment drivers but it hasn't helped Note I did install a new ASUS RT-AC U router and a HP Photosmart printer over the holidays but this issue did not appear right away after the install Diagnostics zip file attached Thanks in advance for any help -Rob

A:BSOD on Sleep mode for ntoskrnl.exe+75bc0 and Shutdown never ends

Hi Zarathud.

HP Photosmart 7520 series - Remove it from Startup.

And, Disable USB Selective Suspense too.
USB Selective Suspend - Turn On or Off

Uninstall MCAfee Security Scan Plus.

Also search in Dell using your service tag .... if there is any Chipset and BIOS update for your model.

Let us know how the computer is running.
_______________________________________________________________________________________

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa8011908a00, fffff80004b2f518, fffffa800bf2c9e0}

Probably caused by : usbccgp.sys

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

DRIVER_POWER_STATE_FAILURE (9f)
A driver is causing an inconsistent power state.
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: fffffa8011908a00, Physical Device Object of the stack
Arg3: fffff80004b2f518, Functional Device Object of the stack
Arg4: fffffa800bf2c9e0, The blocked IRP

Debugging Details:
------------------
DRVPOWERSTATE_SUBCODE: 3

IMAGE_NAME: usbccgp.sys

DEBUG_FLR_IMAGE_TIMESTAMP: 52272385

MODULE_NAME: usbccgp

FAULTING_MODULE: fffff88004e75000 usbccgp

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

BUGCHECK_STR: 0x9F

PROCESS_NAME: System

CURRENT_IRQL: 2

STACK_TEXT:
fffff800`04b2f4c8 fffff800`035318d2 : 00000000`0000009f 00000000`00000003 fffffa80`11908a00 fffff800`04b2f518 : nt!KeBugCheckEx
fffff800`04b2f4d0 fffff800`034cc85c : fffff800`04b2f600 fffff800`04b2f600 00000000`00000000 00000000`00000002 : nt! ?? ::FNODOBFM::`string'+0x33af0
fffff800`04b2f570 fffff800`034cc6f6 : fffffa80`13e73580 00000000`004264fb 00000000`00000000 00000000`00000000 : nt!KiProcessTimerDpcTable+0x6c
fffff800`04b2f5e0 fffff800`034cc5de : 0000009e`0b61c437 fffff800`04b2fc58 00000000`004264fb fffff800`036411e8 : nt!KiProcessExpiredTimerList+0xc6
fffff800`04b2fc30 fffff800`034cc3c7 : 00000029`0e0babc2 00000029`004264fb 00000029`0e0bab18 00000000`000000fb : nt!KiTimerExpiration+0x1be
fffff800`04b2fcd0 fffff800`034b98ca : fffff800`0363ce80 fffff800`0364acc0 00000000`00000001 fffff880`00000000 : nt!KiRetireDpcList+0x277
fffff800`04b2fd80 00000000`00000000 : fffff800`04b30000 fffff800`04b2a000 fffff800`04b2fd40 00000000`00000000 : nt!KiIdleLoop+0x5a
STACK_COMMAND: kb

FOLLOWUP_NAME: MachineOwner

FAILURE_BUCKET_ID: X64_0x9F_3_usbscan_IMAGE_usbccgp.sys

BUCKET_ID: X64_0x9F_3_usbscan_IMAGE_usbccgp.sys

Followup: MachineOwner
---------

0: kd> !irp fffffa800bf2c9e0
Irp is active with 8 stacks 6 is current (= 0xfffffa800bf2cc18)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 0000... Read more

http://www.sevenforums.com/bsod-help-support/318059-bsod-sleep-mode-ntoskrnl-exe-75bc0-shutdown-never-ends.html
Relevancy 90.3%

Hi new member here I thought this sleep ntoskrnl.exe+142940 Possibly - 0x00000119 to BSOD related looks like the place to try and get over a annoying problem Every or days intermittently I am getting a BSOD it usually happens when my PC wakes up from sleep but I can't repeat it I have tried manually sleeping my PC then waking it then sleeping and waking etc but it just happens so intermittently I followed the sticky here to generate my report 0x00000119 ntoskrnl.exe+142940 BSOD - Possibly related to sleep I have been using bluescreenview to try and pinpoint the problem and the error module seems always to be ntoskrnl exe At this point I feel like if the error happened within a couple of minutes rather than a couple of days it would be far easier to get to the bottom of but I just want my PC to be stable You will probably see I am overclocking my CPU from my report and I understand for troubleshooting purposes I need to turn this off Other things I have tried include running memtest for hours no errors and running driver verifier Driver verifier caused BSOD on my Samsung SSD driver I think SamsungRapidSvc I think before the pc even booted and just stuck there so I couldn't get to the memory dump to attach here I have updated on windows update and also made sure I have the latest Samsung magician SSD firmware etc I own a EVO I am not sure if I am facing multiple problems here before when I have had sleep issues it has usually pointed to the GPU but ntoskrnl suggests something else as does running driver verifier Any help is much appreciated Thanks in advance Dodge BEAST- zip

http://www.tenforums.com/bsod-crashes-debugging/59863-0x00000119-ntoskrnl-exe-142940-bsod-possibly-related-sleep.html
Relevancy 90.3%

Last night I went to put my computer to sleep and right after the monitor went to sleep the computer hung for a sec and then BSOD (waking monitor). So I left it off and figured I would look at it in the morning. This morning I wake up and restart and everything seems fine, walk away to make food and my computer went to sleep - BOOM BSOD. When I check event logs it says diver issue for ntoskrnl.exe

I have tried a couple things and looked around but I'm not seeing where the actual fault lies. Thanks in advanced for all help and suggestions

A:BSOD entering sleep mode, points to ntoskrnl.exe driver

Hi Bentobaku.

Daemon Tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known BSOD causer. Uninstall Daemon Tools at first. Then download SPTD standalone installer from Disk-Tools.com, and execute the downloaded file as guided below :
Double click to open it.
Click this button only:

If it is grayed out, as in the picture, there is no more SPTD in your system, and you just close the window.
Then free up the startup. Windows does not need any other program to auto start with it, but the auto start programs often conflicts and causes various problems including BSODs.
Click on the Start button
Type ?msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the ?Startup? tab.
Deselect all items other than the antivirus.
Apply > OK
Accept then restart.
Then try to enable sleep mode for a few times and observe if it BSODing still or not. Let us know the situation.

http://www.sevenforums.com/bsod-help-support/332028-bsod-entering-sleep-mode-points-ntoskrnl-exe-driver.html
Relevancy 82.13%

Firstly, I would like to apologize for my bad English

After updating some drivers and install some software I get time to time BSOD error while I put Windows in sleep mode...

Bug Check String: DRIVER_POWER_STATE_FAILURE
Bug Check Code: 0x0000009f
Parameter 1: 00000000`00000003
Parameter 2: fffffa80`06a2b060
Parameter 3: fffff800`00b9a3d8
Parameter 4: fffffa80`06d04480
Caused By Driver: ntoskrnl.exe
Caused By Address: ntoskrnl.exe+748c0
File Version: 6.1.7601.18869 (win7sp1_gdr.150525-0603)
Processor: x64

The hardware has not been changed, RAM I have already tested, all ok, HDD (including surface test) also tested - no errors. I have already tried to update all the drivers - no success.

PLEASE HELP

A:Periodic BSOD while going to "sleep" ntoskrnl.exe + 10f6b 0x0000009f

Update the network driver form Realtek .... Get the second one of the list, i.e. the Win7 and Server 2008 R2 Auto Installation Program one and install it following the instructions supplied inside the zip.

Also update the driver to the webcam ..... HD Webcam C270

Daemon Tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known BSOD causer. Uninstall Daemon Tools at first. Then download SPTD standalone installer from Disk-Tools.com, and execute the downloaded file as guided below :
Double click to open it.
Click this button only:

If it is grayed out, as in the picture, there is no more SPTD in your system, and you just close the window.
Free up the startup. Windows does not need any other program to auto start with it, but the auto start programs often conflicts and causes various problems including BSODs.
Click on the Start button
Type ?msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the ?Startup? tab.
Deselect all items other than the antivirus.
Apply > OK
Accept then restart.
Report us for any further BSOD after doing these.

http://www.sevenforums.com/bsod-help-support/375341-periodic-bsod-while-going-sleep-ntoskrnl-exe-10f6b-0x0000009f.html
Relevancy 79.55%

I'm working on my parents computer and they are randomly receiving BSODs. They tell me they usually receive them when browsing the internet and running several other programs at once. They are using a Dell Studio XPS 7100 running Windows Home Premium.

My guess is that the issue is driver related. The reason I think this is because I ran the driver verifier and it created a BSOD (this also created the last mini dump file in the attached files). The BSOD message said "A device driver attempting to corrupt the system has been caught. The faulty driver currently on the kernel stack must be replaced with a working version."

Would someone mind looking through the attached documents and letting me know if you see any problems?

A:Random BSODs ntoskrnl.exe+26ee0 & ntoskrnl.exe+5063dc

  
Quote: Originally Posted by RossTTU


I'm working on my parents computer and they are randomly receiving BSODs. They tell me they usually receive them when browsing the internet and running several other programs at once. They are using a Dell Studio XPS 7100 running Windows Home Premium.

My guess is that the issue is driver related. The reason I think this is because I ran the driver verifier and it created a BSOD (this also created the last mini dump file in the attached files). The BSOD message said "A device driver attempting to corrupt the system has been caught. The faulty driver currently on the kernel stack must be replaced with a working version."

Would someone mind looking through the attached documents and letting me know if you see any problems?


The verified crash was related to C:\Program Files (x86)\Lavasoft\Ad-Aware\KernExplorer64.sys

I would remove Ad-aware AT LEAST TO TEST

http://www.sevenforums.com/bsod-help-support/217564-random-bsods-ntoskrnl-exe-26ee0-ntoskrnl-exe-5063dc.html
Relevancy 78.69%

Hello. I have an ASUS x552m laptop with Windows 8.1.

Over the past days, it crashes when I try put it into Sleep mode (maybe 1 out of 4 times). The screen turns off, but the little lights under the touchpad stay lit for a few minutes and then the computer shuts down. I get dump files every time and they are referring to ntoskrnl.exe+14e2a0 DRIVER_POWER_STATE_FAILURE.

I've read in the forums that many ASUS laptops have a similar issue. I uninstalled some of the preinstalled ASUS software and downloaded a new NVIDIA graphics driver after I started to get these crashes. I was thinking about restoring the system to the state when the crashes hadn't occurred yet, but I haven't done it yet.

Any help welcome.STEN-E_01_02_2016_154423,71.zip

http://www.eightforums.com/bsod-crashes-debugging/73795-crash-when-trying-put-laptop-sleep-ntoskrnl-exe.html
Relevancy 78.69%

Hi, I have been experiencing shutdowns which I am not sure of the reason behind. I have hibernate and sleep disabled and I don't see any BSOD. The computer just shutdown on its own.

I looked in the crash dump and it is always pointing to ntoskrnl.exe but I am not sure of what I need to do.

I have attached the files as advised and I hope that you can advice me on what is causing this issue.

thank you in advance.

A:Shutdown when computer goes to sleep - Ntoskrnl.exe

Go here BSOD Crashes and Debugging - Windows 8 Forums

http://www.sevenforums.com/bsod-help-support/288714-shutdown-when-computer-goes-sleep-ntoskrnl-exe.html
Relevancy 77.83%

Hello everyone I have been having some problems with my windows I upgraded from windows about one and a half month ago I had many problems all around with multiple BSOD per week I took up the opportunity to format my HDDs and did a clean installation of windows I had some problems with BSOD at the start but I followed the instructions provided on this link DISM - Repair ntoskrnl.exe+142770 ntoskrnl.exe+142760 BAD_POOL_MEMORY AND Windows Image There was some corruption that was found and repaired I even run a memtest with passes for a grand total of errors This happened at around the rd or th of January Two weeks passed without the slightest of problems until yesterday were I BAD_POOL_MEMORY ntoskrnl.exe+142770 AND ntoskrnl.exe+142760 had a complete system freeze had to press the reset button after minutes Since I didn't get a BSOD I couldn't really research the problem to find a solution I quot ignored quot the problem Tonight I had a BSOD so I thought about asking for your help with this problem My usual routine all BSOD seemed to happen when I was doing this includes having a Mozilla Firefox open with multiple tabs open like facebook youtube mail etc skype and usually World of Warcraft Since my pc is a bit old I have overclocked the cpu to be able to handle the increased punishment The first two BSOD I had was with a default set CPU so I m not sure if this has any impact Any help would be greatly appreciated I've uploaded the logs through the tool that I found on the sticky post WARMACHINE-PC- -Jan- zip Thanks in advance

A:BAD_POOL_MEMORY ntoskrnl.exe+142770 AND ntoskrnl.exe+142760

All dumpfiles are network related mentioning of afd.sys, tcpip.sys
2 dumpfiles flagged networx.sys

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 139, {3, ffffd00022b382d0, ffffd00022b38228, 0}
*** WARNING: Unable to verify timestamp for networx.sys
*** ERROR: Module load completed but symbols could not be loaded for networx.sys
Probably caused by : Pool_Corruption ( nt!ExFreePool+bcd )
Followup: Pool_corruption
--
Please update to the latest version of networx
Driver Description: NetWorx
Driver Update Site: http://www.softperfect.com/products/networx/
If this not stops the BSOD, remove/uninstall it.

http://www.tenforums.com/bsod-crashes-debugging/37918-bad_pool_memory-ntoskrnl-exe-142770-ntoskrnl-exe-142760-a.html
Relevancy 77.83%

I can take this issue no more It seems every time I come out of sleep I get a blue screen related to ntoskrnl exe I've ran sfc on it and it didn't SYSTEM_SERVICE_EXCEPTION of out sleep coming ntoskrnl.exe issue work either so I'm going to post here Ignore the no SYSTEM_SERVICE_EXCEPTION coming out of sleep ntoskrnl.exe issue antivirus found in the report I have malwarebytes alongside windows defender I also use the malware protection feature on Advanced System Optimizer Here is the specifications of my Computer Another note I keep all of my antivirus and defender definitions up to date I have the Advanced system Optimizer antimalware protection feature up to date I have SYSTEM_SERVICE_EXCEPTION coming out of sleep ntoskrnl.exe issue had no conflicts with having these three malware protection programs on my computer either -Windows Enterprise bit which was upgraded From Windows Ultimate bit -it is the full retail version -I'm running an eMachines E laptop GB Ram Intel Mobile Celeron Mhz GB HDD -Windows Enterprise has been on my machine for roughly months I have tried every approach to this issue I even tried repairing the culprit file using System File Checker Perhaps you guys could have the answers I cannot find

A:SYSTEM_SERVICE_EXCEPTION coming out of sleep ntoskrnl.exe issue

Attach your .dmp files -> C:\Windows\Minidump.

http://www.sevenforums.com/bsod-help-support/113971-system_service_exception-coming-out-sleep-ntoskrnl-exe-issue.html
Relevancy 77.83%

Intermittent BSOD only when waking up from sleep. Had them on Win 8.1 Pro, then updated to Win 10 and having the same problem. Never have the problem when the PC is up and running.
Thanks a lot in advance!!!
KAZ-DESKTOP-Sat_01_30_2016_225930_16.zip

A:BSODs only when waking up from sleep (ntoskrnl.exe+142770)

did the memtest86 - no errors in 15 hours

http://www.tenforums.com/bsod-crashes-debugging/39219-bsods-only-when-waking-up-sleep-ntoskrnl-exe-142770-a.html
Relevancy 75.25%

okay so I've been having problems with this computer since day one. and its not even a year old. I just redid my HDD casue my windows 7 just bricked out of no where couldnt get into safe mode either. so got my files and redid my pc. and now i keep getting this error. i posted the results from the diagnostics tool. i'm starting to think maybe the SSD that the os is installed on is bad or maybe my ram is bad.

A:IRQL_NOT_LESS_OR_EQUAL ntoskrnl.exe/ntoskrnl.exe+75c00

Post this report:Activation Issue Posting Instructions

http://www.sevenforums.com/bsod-help-support/297357-irql_not_less_or_equal-ntoskrnl-exe-ntoskrnl-exe-75c00.html
Relevancy 75.25%

Hi there My machine is running VISTA Business -bit edition Yesterday when Another like NTOSKRNL-HOOK, seems season its NTOSKRNL I tried to boot my PC up it took minutes and on log-on displayed quot Configuring Windows Desktop quot and on entering I had a brand new desktop with most of my files in locations I don't know where So I started my Mcafee scan and Another NTOSKRNL-HOOK, seems like its NTOSKRNL season it Another NTOSKRNL-HOOK, seems like its NTOSKRNL season said found NTOSKRNL-HOOK Trojan not one but TWO It deleted and when I scanned again there were again After consecutive scans it goes on and the same GMER says its a rootkit infection I am attaching my DDS and Attach zip rar Another NTOSKRNL-HOOK, seems like its NTOSKRNL season here and once again thank you guys for the awesome job you are doing for everybody I really appreciate it Thanks -------------------------------------- DDS ------------------------------- DDS Ver - - - NTFSx Run by Home at on Wed Internet Explorer BrowserJavaVersion Microsoft Windows Vista Business GMT - AV McAfee VirusScan On-access scanning enabled Updated FW McAfee Personal Firewall enabled Running Processes C Windows system wininit exe C Windows system lsm exe C Windows system svchost exe -k DcomLaunch C Windows system nvvsvc exe C Windows system svchost exe -k rpcss C Windows System svchost exe -k LocalServiceNetworkRestricted C Windows System svchost exe -k LocalSystemNetworkRestricted C Windows system svchost exe -k netsvcs C Windows system svchost exe -k GPSvcGroup C Windows system SLsvc exe C Windows system svchost exe -k NetworkService C Windows system rundll exe C Windows system svchost exe -k LocalService C Windows System spoolsv exe C Windows system svchost exe -k LocalServiceNoNetwork C Windows system Dwm exe C Windows Explorer EXE C Program Files Common Files Real Update OB realsched exe C Program Files McAfee com Agent mcagent exe C Program Files McAfee Anti-Theft McPvTray exe C Program Files Ashampoo Ashampoo AntiSpyWare AntiSpyWare Guard exe C Program Files DAEMON Tools Lite daemon exe C Program Files Internet Download Manager IDMan exe C Users Home AppData Local Google Update GoogleUpdate exe C Program Files Windows Live Messenger msnmsgr exe C Program Files Windows Media Player wmpnscfg exe C Program Files PIXELA ImageMixer SE Ver CameraMonitor exe C Program Files Logitech SetPoint SetPoint exe C Program Files Common Files Logishrd KHAL KHALMNPR EXE C Program Files Ashampoo Ashampoo AntiSpyWare AntiSpyWareService exe C Windows system svchost exe -k hpdevmgmt C Program Files Google Update GoogleUpdate exe C Program Files McAfee SiteAdvisor McSACore exe c PROGRA COMMON mcafee mcproxy mcproxy exe C Windows system rundll exe C PROGRA McAfee VIRUSS mcshield exe C Program Files McAfee MPF MPFSrv exe C Program Files Microsoft SQL Server DTS Binn MsDtsSrvr exe C Program Files McAfee MSK MskSrver exe C Program Files Microsoft SQL Server MSAS SQLSERVER OLAP bin msmdsrv exe C Program Files Microsoft SQL Server MSSQL SQLSERVER MSSQL Binn sqlservr exe C Windows System svchost exe -k HPZ C Windows System svchost exe -k HPZ C Program Files Microsoft SQL Server MSRS SQLSERVER Reporting Services ReportServer bin ReportingServicesService exe C Program Files Microsoft SQL Server Shared sqlbrowser exe C Program Files Microsoft SQL Server Shared sqlwriter exe C Windows system svchost exe -k imgsvc C Windows System svchost exe -k WerSvcGroup C Windows system SearchIndexer exe C Program Files Microsoft SQL Server MSSQL SQLSERVER MSSQL Binn SQLAGENT EXE C PROGRA McAfee MSC mcmscsvc exe C Program Files Microsoft SQL Server MSSQL SQLSERVER MSSQL Binn fdlauncher exe C Program Files Microsoft SQL Server MSSQL SQLSERVER MSSQL Binn fdhost exe C Program Files Internet Download Manager IEMonitor exe C PROGRA McAfee VIRUSS mcsysmon exe c PROGRA COMMON mcafee mna mcnasvc exe C PROGRA McAfee VIRUSS mcods exe C Windows system wbem wmiprvse exe C Windows system vssvc exe C Windows System svchost exe -k swprv C... Read more

A:Another NTOSKRNL-HOOK, seems like its NTOSKRNL season

Hi and welcome to TSF.

I am currently reviewing your log. Please note that this is under the supervision of an expert analyst, and I will be back with a fix for your problem as soon as possible.

You may wish to subscribe to this thread to get immediate notification of replies as soon as they are posted. To do this click Thread Tools, then click Subscribe to this Thread. Make sure it is set to Instant Notification, then click Subscribe.

Please be patient with me during this time.

Mark

http://www.techsupportforum.com/forums/f100/another-ntoskrnl-hook-seems-like-its-ntoskrnl-season-362470.html
Relevancy 70.52%

I have been receiving BSOD's for a while now. I went ahead and uninstalled Panda Security (one BSOD pointed to it) and all of the files along with it . Ran memtest86 and on the 9th pass it had one error. Does that mean it's a faulty module? Can you guys see if there's anything else I should be doing? I really appreciate the help.


Thanks
Andrew

A:ntoskrnl.exe bsod

Code:
BugCheck 1E, {ffffffffc0000005, fffff80002c83945, 0, ffffffffffffffff}

Probably caused by : ntkrnlmp.exe ( nt!ExpInterlockedPopEntrySListFault16+0 )

Followup: MachineOwner
---------

Code:
BugCheck 1000007E, {ffffffffc0000005, fffff80002c9cf5c, fffff880009a99d8, fffff880009a9230}

Probably caused by : memory_corruption ( nt!MmZeroPageThread+883 )

Followup: MachineOwner
---------

Code:
BugCheck 3B, {c0000005, fffff80002c88dc5, fffff880027fc9e0, 0}

Probably caused by : ntkrnlmp.exe ( nt!ExpInterlockedPopEntrySListFault16+0 )

Followup: MachineOwner
---------
Test your RAM modules for possible errors. How to Test and Diagnose RAM Issues with Memtest86+
Run memtest86+ for at least 8 consecutive passes.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

It it does not show any error, enable Driver Verifier to monitor the drivers. Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.



   Information
Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.



   Warning
Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.



   Tip

If you fail to get on the Desktop because of DV, Boot into Advanced Boot Options > Safe mode. Disable DV there. Now boot normally again, and try following the instruction of enabling DV again.
If you cannot boot in Safe mode too, do a System Restore to a point you made earlier.

Let us know the results, with the subsequent crash dumps, if any.
HP OEM on Asus

http://www.sevenforums.com/bsod-help-support/367488-ntoskrnl-exe-bsod.html
Relevancy 70.52%

Recently I have come across an issue where I get a BSOD while gaming that reads kmode exception not handled Upon some research I discovered this may be a driver related issue and that I should run driver verifier As expected another BSOD came up while running Verifier exe and I was forced to disable it via command prompt in order to boot into Windows I am unable to boot into safe mode and this initial BSOD dump files showing kmode exception not handled persists at random while playing games I have no idea how to fix it any help would be ntoskrnl.exe BSOD greatly appreciated System Specs https i gyazo com c a cb b d d cf ffb ef png of the dump files are kmode exception not handled and the other is driver verifier Dump Files http www filedropper com - - http www filedropper com - - http www filedropper com - - http www filedropper com - - nbsp SysnativeFileCollectionApp zip nbsp nbsp MB nbsp nbsp downloads nbsp perfmon zip nbsp nbsp KB nbsp nbsp downloads

http://www.bleepingcomputer.com/forums/t/606854/ntoskrnlexe-bsod/
Relevancy 70.52%

Im getting blue screen every 35min here is full report..from bluescreen view

Caused By Driver - ntoskrnl.exe, Caused By Address - ntoskrnl.exe+71f00

File Description - NT Kernel & System, File Version 6.1.7601.17514 (win7sp1_rtm.101119-1850)

Full Path C:\Windows\Minidump\020112-5850-01.dmp

Crash Address - ntoskrnl.exe+71f00

A:BSOD ntoskrnl.exe?

Please follow http://www.sevenforums.com/crashes-d...tructions.html and post up the crash files so we can properly determine the problem.

http://www.sevenforums.com/bsod-help-support/241806-bsod-ntoskrnl-exe.html
Relevancy 70.52%

For the better part of a year I ve been trying to figure out why I get random BSOD almost please!) ntoskrnl.exe (Help BSOD always cause by ntoskrnl exe ntoskrnl exe cd and ntoskrnl exe b I just about tried everything I could read about and I m starting to suspect that it s a hardware issue The strange thing is that quite a few times my computer crashes after my browser has crashes too Also it almost never crashes when playing games I ve reinstalled Windows a few times And run Chkdsk many times I ve tested my ram for hours tested my harddisk stress tested my graphic cards and CPU I ve tried using both the OEM drivers and the newest drivers Tried BSOD ntoskrnl.exe (Help please!) with and without windows updates I know AVG daemon tools and mcafee sometimes causes problems so they re not installed And probably tried a few things I can t remember right now Now I m hoping someone here can help or at least figure out what exactly the problem is I BSOD ntoskrnl.exe (Help please!) suspect it might be my Intel Graphics Card For a long time I suspected my Wifi-thingy but the the computer BSOD ntoskrnl.exe (Help please!) should crash while playing online games right Also I don t if it can be ram problems that memtest doesn t pick up All the help I can get I greatly appreciated P s First post here so I hope everything is as it should be

A:BSOD ntoskrnl.exe (Help please!)

It might be a hardware error.

Code:
fffff880`035ca858 fffff800`030f65a3 nt!KeBugCheckEx
fffff880`035ca860 fffff800`03077cae nt! ?? ::FNODOBFM::`string'+0x43801
fffff880`035ca9c0 fffff880`04474d6b nt!KiPageFault+0x16e
fffff880`035cab50 fffff880`04475cb6 umbus!UMBus_AssignHardwareIDs+0x107
fffff880`035cabd0 fffff880`044748c6 umbus!UMBus_CreatePdo+0x1da
fffff880`035caf40 fffff880`00f1be8d umbus!UMBus_EvtDeviceListCreatePdo+0x8a
fffff880`035caf70 fffff880`00efeb0e Wdf01000!FxChildList::CreateDevice+0xbd
fffff880`035cb3c0 fffff880`00efecae Wdf01000!FxChildList::ProcessBusRelations+0x79e
fffff880`035cb470 fffff880`00eedd2f Wdf01000!FxPkgPnp::HandleQueryBusRelations+0xca
fffff880`035cb530 fffff880`00eed5d7 Wdf01000!FxPkgFdo::_PnpQueryDeviceRelations+0x6f
fffff880`035cb570 fffff880`00eec79a Wdf01000!FxPkgPnp::Dispatch+0x18f
fffff880`035cb5d0 fffff880`00eec866 Wdf01000!FxDevice::Dispatch+0x19a
fffff880`035cb610 fffff800`03523d26 Wdf01000!FxDevice::DispatchWithLock+0xa6
fffff880`035cb650 fffff800`034364ae nt!IovCallDriver+0x566
fffff880`035cb6b0 fffff800`0343681a nt!PnpAsynchronousCall+0xce
fffff880`035cb6f0 fffff800`03438b67 nt!PnpQueryDeviceRelations+0xfa
fffff880`035cb7b0 fffff800`0346915c nt!PipEnumerateDevice+0x117
fffff880`035cb810 00000000`00000000 nt!PipProcessDevNodeTree+0x21c
Those UserMode Root Bus enumerator entries making me think that hardware tests should be done at first.

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

Stress test the CPU.
Hardware - Stress Test With Prime95

Let us know the results.

http://www.sevenforums.com/bsod-help-support/309852-bsod-ntoskrnl-exe-help-please.html
Relevancy 70.52%

I reformatted my computer yesterday but today after everything was complete I ran a scan of Hitman Pro I know im not BSOD ntoskrnl.exe infected I just use it everynight before I shut down my pc and before it ended I got a BSOD I used the application whocrashed and it gave more info On Fri AM GMT your computer crashed crash dump file C Windows Minidump - - dmp This was probably caused by the following module ntoskrnl exe nt x BC Bugcheck code x xFFFFF A x xFFFFF ECE FB x Error PAGE FAULT BSOD ntoskrnl.exe IN NONPAGED BSOD ntoskrnl.exe AREA file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System Bug check description This indicates that invalid system memory has been BSOD ntoskrnl.exe referenced This appears to be a typical software driver bug and is not likely to be caused by a hardware problem The crash took place in the Windows kernel Possibly this problem is caused by another driver that cannot be identified at this time I also attached the DMP file as well I would apprieciate it if anyone can assist me to this error Edit I cant attach the DMP file

A:BSOD ntoskrnl.exe

I know this is probably a dumb question, but a format implies a complete reinstall of Windows (7?). Most motherboard drivers are picked up by the installer, but a few, like video, audio, and the NIC drivers have to be loaded separately. Did they get installed?.

http://www.bleepingcomputer.com/forums/t/514105/bsod-ntoskrnlexe/
Relevancy 70.52%

Hey everyone my laptop has been crashing with the BSOD almost every five Ntoskrnl.exe BSOD minutes or so The errors are mostly IRQL LESS THEN OR Ntoskrnl.exe BSOD EQUAL or PAGE FAULT or many other errors This all started awhile ago the computer was crashing but still under warranty so i took it in but all they did was replace the hard drive and give it back So I was stuck reinstalling windows Needless to say the crashes continued and I'm pretty sure have gotten worse Looking at the dump files ntoskrnl exe was showing up as the cause many times but that does not seem to tell me enough to figure out what is wrong I tried to make sure that all of the drivers are installed and up to date I have ran memtest and chkdsk many times and they do not find any problems I'm not even sure why the hard drive was replaced in the first place because that was not the problem If anyone has any suggestions I am open to them I tried to run the application it says but the computer would crash too much so here it is as far as it could get

A:Ntoskrnl.exe BSOD

Hi welcome to the forum.
Due to the number of BSOD's this will be passed on for our Forum expert in these matters.I ask you please to be patient & someone will come along to help, when they are available.
Thank you.

http://www.vistax64.com/crashes-debugging/288966-ntoskrnl-exe-bsod.html
Relevancy 70.52%

Hi peoples,

I pressed the power button on my laptop to automatically turn off my laptop, and when I started it I found an error message indicating a blue screen occurred during the shutdown (from the timestamp).
-OS= Windows 7 Home Premium SP1
-x64
-Windows Vista was originally installed, and then upgraded to Windows 7 through a CD
-Windows 7 was installed nearly two years ago
-CPU=Pentium Core 2 Duo T6500
-Video card = Nvidia Geforce GT130M, 1GB
-Don't know anything about mother board or power supply...
-manufactured by Acer
-model 5739G

A:BSOD from ntoskrnl.exe???

Hello cideraid,

It was indeed called for by the ntoskrnl, but that isn't the main reason for this bluescreen. The full faultcode of this one is as follows:

BugCheck 9F, {3, fffffa8003c926d0, fffff80000b9c4d8, fffffa8003dcec60}
*** WARNING: Unable to verify timestamp for NETw5s64.sys
*** ERROR: Module load completed but symbols could not be loaded for NETw5s64.sys
Probably caused by : NETw5s64.sys
BUGCHECK_STR: 0x9F
PROCESS_NAME: System

The driver that caused the error should be:
NETw5s64.sys Tue Sep 15 20:40:39 2009 (4AAFEDB7)

The above driver belongs to your Intel Network card. You should visit the manufacturers site and update to a new one. Or see if Windows Update has any optional updates for this card, as it's outdated. Basicly what happened was that the OS tried to access the network card driver (via the os-kernel, which handles all of these calls), and it didn't respond and/or was unable to access it.

Another driver, that didn't cause this particular issue, that you also need to look at is the following:

adfs.SYS Thu Jun 26 21:52:37 2008 (48640195)

This driver belongs to one or more Adobe applications. The driver is pre-dated to Windows 7's release, so this must be a driver that is for Windows Vista. This needs to be updated aswell, as it could cause issues.

http://www.techsupportforum.com/forums/f299/bsod-from-ntoskrnl-exe-598374.html
Relevancy 70.52%

hi nice folks Been getting bsods for awhile now could plz ntoskrnl.exe some BSOD use help mostly BSOD ntoskrnl.exe could use some help plz this month I've tried everything I know how and have since learned BSOD ntoskrnl.exe could use some help plz about to find the culprit and I give up win ultimate x retail new box running with new hardware for a year now grphx card is not o c'd no hardware was added recently installed windows debugger but having a heck of a time getting it to see the symbols path either the online way or local dir way Tried both ran memtest on all sticks separately and different slots Resutls were positive Of the mini dmp files at least were memory related ntoskrnl exe is usually the gateway to the rest of the kernals and as such it's very generalized or so it was explained to me recently So without a more definitive analysis I'm stuck for now it's a f result code meaning a double fault typically mem or cpu but could be anything BCCode f BCP BCP BCP F BCP FFFFF CD DA OS Version Service Pack Product I'd gladly replace any hardware or drv or sys file or delete files programs or update old drivers Whatever you nice folks think is needed to get rid of the bsods Just need to know which one attached zip files of forum's stated protocol for bsods help Thanks much Rusty

A:BSOD ntoskrnl.exe could use some help plz

Hello and Welcome !

Uninstall Zone Alarm and use the Removal Tool Download from Official Site and Install Microsoft Security Essentials.

Go to Start | CMD | Right Click and Run as administrator | SFC /SCANNOW

Update the Following Drivers:


Code:
uimx64.sys Fri Sep 26 18:58:33 2008
hotcore3.sys Wed Jul 30 03:28:17 2008
adfs.SYS Fri Jun 27 02:22:37 2008
000.fcl Fri Sep 26 18:41:22 2008
Use this link for help in updating drivers: Driver Troubleshooting !! ? Captain Debugger

Bugcheck:


Code:
UNEXPECTED_KERNEL_MODE_TRAP (7f)
This means a trap occurred in kernel mode, and it's a trap of a kind
that the kernel isn't allowed to have/catch (bound trap) or that
is always instant death (double fault). The first number in the
bugcheck params is the number of the trap (8 = double fault, etc)
Consult an Intel x86 family manual to learn more about what these
traps are. Here is a *portion* of those codes:
If kv shows a taskGate
use .tss on the part before the colon, then kv.
Else if kv shows a trapframe
use .trap on that value
Else
.trap on the appropriate frame will show where the trap was taken
(on x86, this will be the ebp that goes with the procedure KiTrap)
Endif
kb will then show the corrected stack.
Arguments:
Arg1: 0000000000000008, EXCEPTION_DOUBLE_FAULT
Arg2: 0000000080050031
Arg3: 00000000000006f8
Arg4: fffff80002c8f05f

Debugging Details:
------------------
BUGCHECK_STR: 0x7f_8

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

PROCESS_NAME: System

CURRENT_IRQL: 2

LAST_CONTROL_TRANSFER: from fffff80002c88ca9 to fffff80002c89740

STACK_TEXT:
fffff880`02f6ace8 fffff800`02c88ca9 : 00000000`0000007f 00000000`00000008 00000000`80050031 00000000`000006f8 : nt!KeBugCheckEx
fffff880`02f6acf0 fffff800`02c87172 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiBugCheckDispatch+0x69
fffff880`02f6ae30 fffff800`02c8f05f : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiDoubleFaultAbort+0xb2
fffff880`02f86f70 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!SepAccessCheck+0x4f
STACK_COMMAND: kb

FOLLOWUP_IP:
nt!KiDoubleFaultAbort+b2
fffff800`02c87172 90 nop

SYMBOL_STACK_INDEX: 2

SYMBOL_NAME: nt!KiDoubleFaultAbort+b2

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: nt

IMAGE_NAME: ntkrnlmp.exe

DEBUG_FLR_IMAGE_TIMESTAMP: 4c1c44a9

FAILURE_BUCKET_ID: X64_0x7f_8_nt!KiDoubleFaultAbort+b2

BUCKET_ID: X64_0x7f_8_nt!KiDoubleFaultAbort+b2

Followup: MachineOwner
---------
Hope this helps,
Captain

http://www.sevenforums.com/bsod-help-support/132399-bsod-ntoskrnl-exe-could-use-some-help-plz.html
Relevancy 70.52%

gotten two bsod yesterday
im not sure what caused them so here i am.
all i know it was irql_not_less_or_equal
and Driver IRQL Not Less Or Equal
link to dumpfiles:
https://www.dropbox.com/s/08d26ijiol...32-01.dmp?dl=0
https://www.dropbox.com/s/20avl3dims...40-01.dmp?dl=0

A:bsod ntoskrnl

Hi,

DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)

This indicates that a kernel-mode driver attempted to access pageable memory at a process IRQL that was too high.

A driver tried to access an address that is pageable (or that is completely invalid) while the IRQL was too high. This bug check is usually caused by drivers that have used improper addresses.


Code:

2: kd> .trap 0xfffff8800b66d050
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000000 rbx=0000000000000000 rcx=00000000000015f2
rdx=0000000000000000 rsi=0000000000000000 rdi=0000000000000000
rip=fffff88004855c9b rsp=fffff8800b66d1e0 rbp=fffffa8009923838
r8=0000000000000395 r9=fffffa80097dd000 r10=3661663461323066
r11=fffff8800b66d200 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei pl nz na pe nc
L1C62x64+0x6c9b:
fffff880`04855c9b 488b08 mov rcx,qword ptr [rax] ds:00000000`00000000=????????????????
On the faulting instruction, we failed moving a pointer stored in rax (dereferenced it) and ultimately failed storing the contents of a qword into rcx. The reason we failed is because rax was null (zero).


Code:

2: kd> k
*** Stack trace for last set context - .thread/.cxr resets it
Child-SP RetAddr Call Site
fffff880`0b66d1e0 fffffa80`097d3cc0 L1C62x64+0x6c9b
fffff880`0b66d1e8 fffffa80`097d3b60 0xfffffa80`097d3cc0
fffff880`0b66d1f0 00000000`00000000 0xfffffa80`097d3b60
The driver that caused it was the Atheros NIC driver.

Update your Atheros drivers ASAP.

Regards,

Patrick

http://www.techsupportforum.com/forums/f299/bsod-ntoskrnl-885289.html
Relevancy 70.52%

? OS -Windows 7
? x64
? What was original installed OS on system?
? full retail version
? Age of system one year
? Age of OS installation - re-installed because of BSOD

? CPU intel Core i5 3470
? Video Card NVIDIA GeForce GTX 650 Ti BOOST
? MotherBoard Asus P877-v LK
? Power Supply -PC Power and Cooling Silencer MKIII 600W

? System Manufacturer- DIY
. Desktop

A:BSOD ntoskrnl.exe?

Please post detailed description of the issues and when the BSOD happens

http://www.techsupportforum.com/forums/f299/bsod-ntoskrnl-exe-880457.html
Relevancy 70.52%

I have been getting a couple of different BSOD's for the past few months, they seem to come and go, sometimes at startup, sometimes during high CPU tasks like some games. At first I thought it was my ram but I believe it may be a driver somewhere. I thought I could read and analyze my own dump files but I am far from an expert. Heres the required info

? OS - Windows 7
? x64 ?
? original installed OS: Windows 7
? full retail version
? Age of system: about 5 years
? Age of OS installation: 5 years also
? CPU: AMD Phenom(tm) II X4 955 Processor (4 CPUs), ~3.2GHz
? Video Card: NVIDIA GeForce GT 220
? MotherBoard: Asus M4A785-M
? Power Supply
-System Manufacturer:Ultra
-Exact model number ULT-LSP750P
Desktop

Thank you in advance!

A:ntoskrnl.exe BSOD

Hi,

PAGE_FAULT_IN_NONPAGED_AREA (50)

This indicates that invalid system memory has been referenced.

Bug check 0x50 usually occurs after the installation of faulty hardware or in the event of failure of installed hardware (usually related to defective RAM, be it main memory, L2 RAM cache, or video RAM).

Another common cause is the installation of a faulty system service.

Antivirus software can also trigger this error, as can a corrupted NTFS volume.


Code:

1: kd> k
Child-SP RetAddr Call Site
fffff880`06af8fb8 fffff800`0303e54c nt!KeBugCheckEx
fffff880`06af8fc0 fffff800`030942ee nt! ?? ::FNODOBFM::`string'+0x456df
fffff880`06af9120 fffff880`13215f7d nt!KiPageFault+0x16e
fffff880`06af92b8 fffff880`132433b9 nvlddmkm+0x1daf7d
fffff880`06af92c0 fffffa80`08df6000 nvlddmkm+0x2083b9
fffff880`06af92c8 00000000`00000030 0xfffffa80`08df6000
fffff880`06af92d0 fffffa80`08df6000 0x30
fffff880`06af92d8 fffffa80`0e51c160 0xfffffa80`08df6000
fffff880`06af92e0 00000000`00000001 0xfffffa80`0e51c160
fffff880`06af92e8 fffff880`135f2ee0 0x1
fffff880`06af92f0 fffffa80`00000000 nvlddmkm+0x5b7ee0
fffff880`06af92f8 00000000`00000001 0xfffffa80`00000000
fffff880`06af9300 00000000`00000000 0x1
The nVidia video driver is referencing invalid memory.

------------------------------

1. Uninstall MagicISO ASAP, old drivers.

2. Ensure you have the latest video card drivers. If you are already on the latest video card drivers, uninstall and install a version or a few versions behind the latest to ensure it's not a latest driver only issue. If you have already experimented with the latest video card driver and many previous versions, please give the beta driver for your card a try.

3. Uninstall Asus PC Probe/AI Suite, as well as any other installed Asus bloatware.

Regards,

Patrick

http://www.techsupportforum.com/forums/f299/ntoskrnl-exe-bsod-876257.html
Relevancy 70.52%

Hi,

I got BSOD very often with my actual computer. But when I launch the safe mode with/without LAN I dont have any problems.
I give you the diagnostics on the attachments.
If you need somes informations don't hesitate
Sorry for my bad English..

Regards,

http://www.sevenforums.com/bsod-help-support/390175-bsod-ntoskrnl-exe.html
Relevancy 70.52%

hi all,

i am having random bsod and i always come across ntoskrnl.exe and others like hal.dll. but all the bsod have bugCheck code: 0x101. i am attaching the file of the bsod as instructed in the posting of bsod section.

Also, sometimes, my computer just freezes and comes back to life after 2-4 mintues and the event manager shows event id 7036. its normally application experience that freezes the come, but comes back to life, and sometimes i have to hard reboot the comp.

pls be kind enough to suggest and have a look at my zip files

A:BSOD: ntoskrnl.exe and others

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

If you are overclocking STOP
We could also use some system information, which you can get easily by running msinfo32.
To do that go to start>run>type msinfo32>enter

When it is finished running go to file>save>name it and upload to us here.
You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.



To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

http://www.sevenforums.com/bsod-help-support/223474-bsod-ntoskrnl-exe-others.html
Relevancy 70.52%

Can you help me Microsoft R Windows Debugger Version AMD Copyright c Microsoft Corporation All rights reserved Loading Dump File C Windows Minidump - - dmp Mini Kernel Dump File Only registers ntoskrnl.exe BSOD and stack trace are available Symbol search path is C Windows Symbol Executable search path is Windows Kernel Version Service Pack MP procs Free x Product WinNt suite TerminalServer SingleUserTS Built by amd fre win sp rtm - Machine Name Kernel base xfffff BSOD ntoskrnl.exe a f PsLoadedModuleList xfffff ca e Debug session time Sat Apr UTC - System Uptime days Loading Kernel Symbols Loading User Symbols Loading unloaded module list Bugcheck Analysis Use analyze -v to get detailed debugging information BugCheck D fffff ffec c d fffff ffec c d ERROR Symbol file could not be found Defaulted to export symbols for hal dll - ERROR Symbol file could not be found Defaulted to export symbols for USBPORT SYS - Probably caused by USBPORT SYS USBPORT Followup MachineOwner --------- kd gt analyze -v Bugcheck Analysis DRIVER IRQL NOT LESS OR EQUAL d An attempt was made to access a pageable or completely invalid address at an interrupt request level IRQL that is too high This is usually caused by drivers using improper addresses BSOD ntoskrnl.exe If kernel debugger is available get stack backtrace Arguments Arg fffff ffec c d memory referenced Arg IRQL BSOD ntoskrnl.exe Arg value read operation write operation Arg fffff ffec c d address which referenced memory Debugging Details ------------------ READ ADDRESS GetPointerFromAddress unable to read from fffff d e fffff ffec c d CURRENT IRQL FAULTING IP fffff ff ec c d CUSTOMER CRASH COUNT DEFAULT BUCKET ID VISTA DRIVER FAULT BUGCHECK STR xD PROCESS NAME System TRAP FRAME fffff ffb -- trap xfffff ffb NOTE The trap frame does not contain all registers Some register values may be zeroed or incorrect rax fffffa rbx rcx rdx rsi rdi rip fffff ffec c d rsp fffff ffba rbp r c r cf r fffffa r fffffa r r r r iopl nv up ei pl nz ac pe nc fffff ff ec c d Resetting default scope LAST CONTROL TRANSFER from fffff adebe to fffff adf FAILED INSTRUCTION ADDRESS fffff ff ec c d STACK TEXT fffff ffb fffff adebe a fffff ff ec c d nt KeBugCheckEx fffff ffb fffff add fffffa d fffffa b d fffffa nt KiBugCheckDispatch x fffff ffb fffff ff ec c d fffffa d fffffa d fffff a fffffa nt KiPageFault x fffff ffba fffffa d fffffa d fffff a fffffa fffffa xfffff ff ec c d fffff ffba fffffa d fffff a fffffa fffffa fffffa xfffffa d fffff ffba fffff a fffffa fffffa fffffa c xfffffa d fffff ffba fffff a b f fffffa fffffa fffffa c hal HalMakeBeep x a fffff ffba fffff a a d fffffa faee fffffa c fffffa d hal IoFlushAdapterBuffers xaf fffff ffbac fffff e fffffa c a fffffa c fffffa c fffffa c a hal HalFreeCommonBuffer x fffff ffbb fffff eab fffffa fffffa a ffffffff fffffa cea USBPORT x fffff ffbc fffff c f fffffa cea fffffa c a fffffa d USBPORT x ab fffff ffbc fffff df fffffa c fffffa ce fffffa cea USBPORT x f fffff ffbca fffff aeab c fffff fd fffffa cea fffffa cec USBPORT x f fffff ffbcd fffff ad a fffff fd fffff fddfc fffff ddb nt KiRetireDpcList x bc fffff ffbd fffff ffc fffff ff fffff ffbd nt KiIdleLoop x a STACK COMMAND kb FOLLOWUP IP USBPORT fffff e c xor r d r d SYMBOL STACK INDEX SYMBOL NAME USBPORT FOLLOWUP NAME MachineOwner MODULE NAME USBPORT IMAGE NAME USBPORT SYS DEBUG FLR IMAGE TIMESTAMP a bcc FAILURE BUCKET ID X xD CODE AV BAD IP USBPORT BUCKET ID X xD CODE AV BAD IP USBPORT Followup MachineOwner --------- kd gt lmvm USBPORT start end module name fffff b fffff USBPORT export symbols USBPORT SYS Loaded symbol image file USBPORT SYS Mapped memory image file c windows symbol USBPORT SYS A BCC USBPOR T SYS Image path SystemRoot system DRIVERS USBPORT SYS Image name USBPORT SYS Timestamp Mon Jul A BCC CheckSum E B ImageSize File version Product version File flags Mask F File OS NT Win File type Dll File date Translations b CompanyName Microsoft Corporation ProductName Microsoft Windows Operating System InternalName usbport ... Read more

A:BSOD ntoskrnl.exe

Please provide a full report
http://www.sevenforums.com/crashes-d...tructions.html

http://www.sevenforums.com/bsod-help-support/159953-bsod-ntoskrnl-exe.html
Relevancy 70.52%

Hi,
 
I have just inherited a Win7 Pro laptop and recently have had 2 or 3 BSOD.  Most of the dumps show ntoskrnl.exe to be the issue, however after a lot of Googling, most people are advising that this could be because this was just the last driver to be used before it crashed?
 
Also looking at the past .dmp it looks like there has been numerous "Bug Check Strings" such as BAD_POOL_HEADER / SYSTEM_SERVICE_EXCEPTION etc.
 
I am going to run a memtest tonight (but need to use the laptop today so will have to wait until tonight).  However, in the mean time, I have attached the output from BlueScreenView as a text doc and if anyone with more experience of troubleshooting BSODs could advise if they can see anything obvious from the output, that would be great and I would really appreciate it.
 
 

A:BSOD - ntoskrnl.exe

Hi
 
Varying bugcheck code is usually a sign of memory related issues. Running "Memtest86+" is the right thing to begin with. Make sure you are using the latest version 5.01 and run at least seven or more passes with it.
 
http://www.sevenforums.com/tutorials/105647-ram-test-memtest86.html

http://www.bleepingcomputer.com/forums/t/513676/bsod-ntoskrnlexe/
Relevancy 70.52%

I have been getting blue screens about once per week. I used BlueScreenView and it seems that it usually crashes because of ntoskrnl.exe. I ran the BSOD Dump & System File Collection app and attached the results.

I am running Windows 7 home premium 64-bit.

A:BSOD ntoskrnl.exe

  
Quote: Originally Posted by cstt


I have been getting blue screens about once per week. I used BlueScreenView and it seems that it usually crashes because of ntoskrnl.exe. I ran the BSOD Dump & System File Collection app and attached the results.

I am running Windows 7 home premium 64-bit.



Several issues need to be addressed.

1-TDR reset





Quote:
"It's not a true crash, in the sense that the bluescreen was initiated only because the combination of video driver and video hardware was being unresponsive, and not because of any synchronous processing exception".

Since Vista, the "Timeout Detection and Recovery" (TDR) components of the OS video subsystem have been capable of doing some truly impressive things to try to recover from issues which would have caused earlier OSs like XP to crash.

As a last resort, the TDR subsystem sends the video driver a "please restart yourself now!" command and waits a few seconds.

If there's no response, the OS concludes that the video driver/hardware combo has truly collapsed in a heap, and it fires off that stop 0x116 BSOD.

If playing with video driver versions hasn't helped, make sure the box is not overheating.

Try removing a side panel and aiming a big mains fan straight at the motherboard and GPU.

Run it like that for a few hours or days - long enough to ascertain whether cooler temperatures make a difference.

If so, it might be as simple as dust buildup and subsequently inadequate cooling.

I would download cpu-z and gpu-z (both free) and keep an eye on the video temps Let us know if you need help


STOP 0x116: VIDEO_TDR_ERROR troubleshooting
2-Your AVG. Yes I know you changed from Avira to AVG.

I notice your AVG which is often at least a contributing cause of BSOD'S . Please remove and replace your AVG with Microsoft Security Essentials AT LEAST TO TEST

Download tools and utilities | AVG Worldwide

Microsoft Security Essentials - Free Antivirus for Windows
3- Update to SP-1

Please run the update readiness tool and then update to SP-1

Ensure you install the correct 64 or 32 bit option for your system)
Download the System Update Readiness Tool (64bit)
Download the System Update Readiness Tool (32bit)

http://www.sevenforums.com/bsod-help-support/202988-bsod-ntoskrnl-exe.html
Relevancy 70.52%

Hello,

during the past ~3 weeks I've had 3 ntoskrnl.exe BSOD and I don't know what the problem is.. Software, hardware ? So I'm hoping you guys can help me.

Memtest86+ ran on each RAM module for 8 passes without errors. CrystalDiskInfo shows that my SSD&HDD are in good health.

My desktop specs:
Full retail Win7 64-bit (also the original OS installed)
RAM, CPU, Motherboard are about 5 weeks old, GPU&PSU are 3,5 years old, SSD 1 -1,5 years old, HDD 5-8 months
Re-installed OS 5 weeks ago

CPU: Intel i5 4590
Motherboard: Asrock z87m Extreme4
GPU: Club3D 6950 2GB
PSU: XFX Pro 750watt
SSD: Crucial M4 64 gb
HDD: Seagate desktop HDD 1TB

See attachements for perfmon & sysnative file. I've also had Driver Verifier enabled and shortly after enabling DV, my system crashed. Dumpfile of that BSOD is also included.

A:ntoskrnl.exe BSOD's

Can I have a Kernel memory dump as it will help identify the problem easier.

Go the Start
Right click My Computer
Select Properties
Click Advanced system settings
Click on the Advanced tab
Select Settings under Startup and Recovery
Then under Write debugging information select Kernel memory dump.

Once a dump is created go to:


Code:
C:\Windows\memory.dmp
Copy the file to the desktop, zip it up and upload it to a file sharing site like Onedrive. After the upload is done post the download link in your next reply.

http://www.techsupportforum.com/forums/f299/ntoskrnl-exe-bsods-898658.html
Relevancy 70.52%

Hi guys.
Really need help here, my computer has been doing this for a while now and its really irritating. Basically, whenever my computer is about to load the desktop or just after it loads the desktop it gets BSOD and says 'IRQL_NOT_LESS_OR_EQUAL' and reboots. I'm pretty positive its not my RAM because i used the Windows Memory Diagnostic tool and didnt say anything was wrong. I used BlueScreenView and it almost always says the cause is ntoskrnl.exe. Also, I cannot simply re-install Windows 7 as I have an N Edition .iso I was given from a friend about a year ago, and I cannot use that as it wont let me install Windows 7 on safe mode which is the only thing that works.

I will attach my BlueScreenView files.
Any help would be much appreciated.
Thanks in advance.

BlueScreenView- Attachment 126869

A:BSOD ntoskrnl.exe

Here are the dumps aswell Attachment 126875. Thanks.

http://www.sevenforums.com/bsod-help-support/133661-bsod-ntoskrnl-exe.html
Relevancy 70.52%

Hello guys.....Im new in the forum and i really need your help to solve my bsod problem that i face with a lot of months....First of all i would like to thank u in advance....!!!!!
My system specs are :\\Intel Core 2 Quad Cpu Q6600\\2 Gb RAM\\Geforce 9400 GT

Is Vista . . .
- x86 (32-bit)
- Home Premium
- an OEM
- Its about 5 years old
- not yet sp1 installed

A:BSOD ntoskrnl.exe.....???

Welcome
YOu have given us one dump report. Unfortunately, it ususlly takes many more to accurately diagnose a BSOD problem. The good news is that your dump has given a clear reason for your problem,memory
I would take this memort test. If you fail the test, remedy the situation, Then use the computer, again. If the problem continues, post with the new dump reports.
Guide to using Memtest86+ - Geeks to Go Forums
In addition, I see that you have a very large number of outdated drivers. Make sure that windows update is set to install drivers. This most certainly has contributed or will contribute to future BSODs.

http://www.vistax64.com/crashes-debugging/290959-bsod-ntoskrnl-exe.html
Relevancy 70.52%

Hi Folks
Any help with the following will be greatly appreciated. We get random BSOD which to my untrained eye seem to relate back to ntoskrnl.exe. Unfortunately the problem is not consistant in that we cannot cause the BSOD and hence finding a solution has been difficult.

Memmory diagnostics has run overnight with no problem all drivers are up to date is there anything else I can do before my Husband tries a reinstall of the OS

A:Ntoskrnl bsod

  
Quote: Originally Posted by sharonross


Hi Folks
Any help with the following will be greatly appreciated. We get random BSOD which to my untrained eye seem to relate back to ntoskrnl.exe. Unfortunately the problem is not consistant in that we cannot cause the BSOD and hence finding a solution has been difficult.

Memmory diagnostics has run overnight with no problem all drivers are up to date is there anything else I can do before my Husband tries a reinstall of the OS



Almost universally blamed on memory management
Memory corruption probably caused by a driver. please run these two tests

1-Memtest.

*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program.

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

RAM - Test with Memtest86+

2-Driver verifier






Quote:
I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.


Driver Verifier - Enable and Disable

http://www.sevenforums.com/bsod-help-support/182008-ntoskrnl-bsod.html
Relevancy 70.52%

Little story to this:

BSOD's seem to go off most of the time when I am playing WoW, but not necessarily. I am almost certain this is not because of the hardware, the BSOD's started to happen when I have formatted my PC thus why I am sure this must be something else but I'm no expert. I tried to resolve this on my own for a while checking a couple of forums as well. Some important information I think what needs to be shared is the fact that I used TurboV Evo to OC the processor (I know, stupid by me I shouldn't even bothered to do that) but I did have it OC'd before the format as well and everything was fine and dandy. Please tell me, am I right by saying this is because of the faulty or perhaps missing drivers? I need some help on this one, thanks in advance. (SF attached)

A:BSOD because of ntoskrnl.exe (?)

The installation appears non-genuine.
The Key is that of a HP OEM computer - and the motherboard is a retail one by ASUS.
This implies that an Activation Exploit is in use to bypass activation and validation requirements.

You need to reformat and reinstall with genuine media and Key.

http://www.sevenforums.com/bsod-help-support/286671-bsod-because-ntoskrnl-exe.html
Relevancy 70.52%

Hello, I've been having some insane issues with BSOD lately. It doesn't seem to happen at any time in particular, just whenever it feels like it, it seems. I just installed a new Graphics card, and it's happened a few times since. Before the new card, I got just one BSOD-- but never knew to jot down the codes, and never knew what a minidump was....etc. I've attached my minidump folder for my last four BSOD's. Could you please help me to find out what is causing this?
 

Relevancy 70.52%

I have beenn having several BSOD's a daY. It happens when my computer is idiling. I ran chkdsk and did a memory test for about an hour with no problems. I have attached the dump file. I would be grateful if you could
look at it. For the record this is a computer I built about a year ago.

A:ntoskrnl.exe BSOD

Hello t41310.

The crash is caused by Realtek RTL8168D/8111D Family PCI-E Gigabit Ethernet NIC driver.

Code:
Irp is active with 3 stacks 2 is current (= 0xfffffa8008e52128)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 e1 fffffa800834d050 00000000 fffff800032da200-fffffa8008518120 Success Error Cancel pending
Unable to load image \SystemRoot\system32\DRIVERS\Rt64win7.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for Rt64win7.sys
*** ERROR: Module load completed but symbols could not be loaded for Rt64win7.sys
\Driver\RTL8167 nt!PopSystemIrpCompletion
Args: 00012200 00000000 00000002 00000002
[ 0, 0] 0 0 00000000 00000000 00000000-fffffa8008518120

Args: 00000000 00000000 00000000 00000000
And the driver is old.

Code:
fffff880`0446a000 fffff880`044d4000 Rt64win7 T (no symbols)
Loaded symbol image file: Rt64win7.sys
Image path: \SystemRoot\system32\DRIVERS\Rt64win7.sys
Image name: Rt64win7.sys
Timestamp: Wed Jan 26 19:04:03 2011 (4D4022CB)
CheckSum: 0006AFBB
ImageSize: 0006A000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Update it from Realtek

There are reasons to suspect a malware.

Code:
fffff800`00b9c4f8 fffff880`00dc2830 ataport!IdePortTickHandler
fffff800`00b9c510 fffff880`00dc2830 ataport!IdePortTickHandler
Scan the system for possible virus infection.
Anti-rootkit utility TDSSKiller
Windows Defender Offline
On a serious note, hibernate or sleep is not needed for a desktop PCat all, as it runs on the external source of power and not on the battery. Dont worry to disable hibernate and sleep.
Hibernate - Enable or Disable

Free up the startup.
Click on the Start button
Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the “Startup” tab.
Deselect all items other than the antivirus.
Apply > OK
Accept then restart.
If possible, Plan to update the BIOS. Here's your current one .... what they calls Initial BIOS.

Code:
BiosVersion = 4.6.4
BiosReleaseDate = 09/07/2011
Take the update from BIOSTAR, dated 2012-09-17.
Let us know the results.

http://www.sevenforums.com/bsod-help-support/285708-ntoskrnl-exe-bsod.html
Relevancy 70.52%

? OS - Vista/ Windows 7 ? Windows 7
? x86 (32-bit) or x64 ? 64
? What was original installed OS on system? none
? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)? full retail
? Age of system (hardware) one year
? Age of OS installation - have you re-installed the OS? last install one month ago

? CPU Intel Core i5-2500 3.3 GHz 4 Cores
? Video Card Ati Radeon HD 5850
? MotherBoard Asus P
? Power Supply - brand & wattage no name 500W

? System Manufacturer selfbuilt
? Exact model number (if laptop, check label on bottom) not aviable

A:BSOD - ntoskrnl.exe

Quote:





Originally Posted by moehre


? OS - Vista/ Windows 7 ? Windows 7
? x86 (32-bit) or x64 ? 64
? What was original installed OS on system? none
? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)? full retail
? Age of system (hardware) one year
? Age of OS installation - have you re-installed the OS? last install one month ago

? CPU Intel Core i5-2500 3.3 GHz 4 Cores
? Video Card Ati Radeon HD 5850
? MotherBoard Asus P8P67
? Power Supply - brand & wattage no name 500W

? System Manufacturer selfbuilt
? Exact model number (if laptop, check label on bottom) not aviable

http://www.techsupportforum.com/forums/f299/bsod-ntoskrnl-exe-633919.html
Relevancy 70.52%

I've been having problems with a pc crashing every few hours, ususally while online but I'm not sure what is causing it after having tried everything I can think of.
I have run Mem diagnostics and not found anything, and had a look with blue screen viewer etc.
The files are attached from BSOD Dump & System File Collection app and the Performance report.

Please help!

It is Windows 64 bit x64Windows 7 Home PremiumOEM version
System is just under 2 years old as is the OS installation

A:BSOD ntoskrnl.exe

  
Quote: Originally Posted by briggsy1300


I've been having problems with a pc crashing every few hours, ususally while online but I'm not sure what is causing it after having tried everything I can think of.
I have run Mem diagnostics and not found anything, and had a look with blue screen viewer etc.
The files are attached from BSOD Dump & System File Collection app and the Performance report.

Please help!

It is Windows 64 bit x64Windows 7 Home PremiumOEM version
System is just under 2 years old as is the OS installation



Two problems
1-ASACPI.SYS

The pre 2009 version of this driver is a known BSOD cause.

Please visit this link: ASUS teK Computer Inc. -Support- Drivers and Download P7P55D LE
ASUSTeK Computer Inc. -Support- Drivers and Download P7P55D LE

Scroll down to the Utilities category, then scroll down to the "ATK0110 driver for WindowsXP/Vista/Windows 7 32&64-bit" (it's about the 12th item down).
Download and install it.
Go to C:\Windows\System32\drivers to check and make sure that the ASACPI.SYS file is date stamped from 2009 or 2010 (NOT 2005).

2-Old drivers that need updating

Code:
ASACPI.sys 3/27/2005 10:30:36 PM fffff880`04231000 fffff880`04239000 0x00008000 0x42476c4c
wanatw64.sys 4/11/2005 6:07:10 PM fffff880`05749000 fffff880`05755000 0x0000c000 0x425af50e
dne64x.sys 11/10/2008 9:01:24 PM fffff880`05652000 fffff880`0567e000 0x0002c000 0x4918d964
yk62x64.sys 2/23/2009 11:02:27 AM fffff880`05348000 fffff880`053ab000 0x00063000 0x49a2ba83
nvlddmkm.sys 5/14/2009 4:48:07 PM fffff880`04840000 fffff880`05347b00 0x00b07b00 0x4a0c8387
How To Find Drivers:




Quote:
- search Google for the name of the driver
- compare the Google results with what's installed on your system to figure out which device/program it belongs to
- visit the web site of the manufacturer of the hardware/program to get the latest drivers (DON'T use Windows Update or the Update driver function of Device Manager).
- if there are difficulties in locating them, post back with questions and someone will try and help you locate the appropriate program.


- - The most common drivers are listed on this page: Driver Reference Driver Reference
- - Driver manufacturer links are on this page: Drivers and Downloads

http://www.sevenforums.com/bsod-help-support/181054-bsod-ntoskrnl-exe.html
Relevancy 70.52%

Started getting BSODS, already had 4 today, each said ntoskrnl.exe was to blame, but not sure I buy it. Any help would be appreciated
http://www.mediafire.com/?nlx1nk0cget3avh - Link to Health Report, and jcgriff2 files, and the autoruns .arn

http://speccy.piriform.com/results/bnMCGguUGwf1v2bjlqWGtWf - Speccy Snapshot

A:BSOD Help ntoskrnl.exe

Hello ChewieBacca,What was "new" just before the BSODs started (i.e. new hardware, software, malware, error messages)?If you are overclocking, return settings to stock.msinfo32[Problem Devices]Device PNP_Device_ID Error_Code Not Available ACPI\ATK0110\1010110 The drivers for this device are not installed.Have you installed all drivers from the Asus CD, especially chipset and LAN? Or checked the Asus website for updates? If all else fails, see if the driver can be updated via Device Manager.

http://www.bleepingcomputer.com/forums/t/475990/bsod-help-ntoskrnlexe/
Relevancy 70.52%

Hello,

i have a Problem with my Lenovo S205 in irregular times.

In the attachment have I add my Minidump.
I hope somebody can help me.
I doesnt understand the dump

Thanks

A:Ntoskrnl.exe bsod

Please provide this information so we can provide a complete analysis: https://www.eightforums.com/bsod-cra...tructions.html

Your BIOS dates from 2011. Please check at the manufacturer's website to see if there are any BIOS updates available for your system. Also check the readme file to see if they apply to the problems that you are having. Please be advised that flashing the BIOS is a very unforgiving process - and one mistake can physically damage your motherboard.

Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable! :

DRHARD64.sys Thu Dec 1 04:39:47 2005 (438EC4E3)
Dr. Hardware System Info
http://www.carrona.org/drivers/driver.php?id=DRHARD64.sys

LhdX64.sys Mon Jan 11 10:06:58 2010 (4B4B3E92)
Lenovo HD Disk Driver
http://www.carrona.org/drivers/driver.php?id=LhdX64.sys

windrvr6.sys Tue Aug 31 07:15:04 2010 (4C7CE438)
WinDriver or Alohabob USB Bridge Cable Driver
http://www.carrona.org/drivers/driver.php?id=windrvr6.sys

AtihdW76.sys Wed Nov 17 07:02:04 2010 (4CE3C43C)
ATI Function Driver for HD Audio Service
http://www.carrona.org/drivers/driver.php?id=AtihdW76.sys

usbfilter.sys Mon Nov 29 04:50:21 2010 (4CF3775D)
AMD USB Filter Driver (likely part of the chipset drivers)
http://www.carrona.org/drivers/driver.php?id=usbfilter.sys

Rt630x64.sys Wed Oct 19 08:12:55 2011 (4E9EBEC7)
Realtek PCI/PCIe Adapters
http://www.carrona.org/drivers/driver.php?id=Rt630x64.sys

DRHMSR64.sys Tue Dec 6 05:23:24 2011 (4EDDED1C)
suspect that it's related to Dr. Hardware System Info
DRHMSR64.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

Analysis:
The following is for informational purposes only.

Code:
**************************Sat Mar 2 20:39:29.408 2013 (UTC - 5:00)**************************
Loading Dump File [C:\Users\Owner\SysnativeBSODApps\030313-17581-01.dmp]
Windows 8 Kernel Version 9200 MP (2 procs) Free x64
Built by: 9200.16496.amd64fre.win8_gdr.130108-1504
System Uptime:0 days 0:08:50.446
Probably caused by :win32k.sys ( win32k!SURFACE::bDeleteSurface+5b6 )
BugCheck 3B, {c0000005, 55ad2000, fffff88006caefc0, 0}
BugCheck Info: SYSTEM_SERVICE_EXCEPTION (3b)
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: 0000000055ad2000, Address of the instruction which caused the bugcheck
Arg3: fffff88006caefc0, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.
BUGCHECK_STR: 0x3B
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: chrome.exe
FAILURE_BUCKET_ID: 0x3B_win32k!SURFACE::bDeleteSurface
BIOS Version 4BCN24WW
BIOS Release Date 08/10/2011
Manufacturer LENOVO
Product Name 1038D9G
??????????????????????????????????????????????????????????????????????????????????????``
**************************Thu Feb 28 17:39:41.005 2013 (UTC - 5:00)**************************
Loading Dump File [C:\Users\Owner\SysnativeBSODApps\022813-24538-01.dmp]
Windows 8 Kernel Version 9200 MP (2 procs) Free x64
Built by: 9200.16496.amd64fre.win8_gdr.130108-1504
System Uptime:0 days 1:12:36.043
Probably caused by :win32k.sys ( win32k!SURFACE::bDeleteSurface+5b6 )
BugCheck 3B, {c0000005, 22759000, fffff880084df1c0, 0}
BugCheck Info: SYSTEM_SERVICE_EXCEPTION (3b)
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: 0000000022759000, Address of the instruction which caused the bugcheck
Arg3: fffff880084df1c0, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.
BUGCHECK_STR: 0x3B
DEFAULT_BUCKE... Read more

http://www.eightforums.com/bsod-crashes-debugging/21375-ntoskrnl-exe-bsod.html
Relevancy 70.52%

I have updated drivers, tried a different mouse as I read razer mouse's have caused BSOD's, tried a different powersupply, i'm stumped, still random when it crashes, but at least 1-2 times a night.
any help would be appreciated
edit:

some more info, never crashes while in an application ie: a game, always crashes at desktop or web browser, different sites, multiple times on youtube.

blue screen message is:

DPC_WATCHDOG_VIOLATION

A:BSOD, Hal.dll ntoskrnl.exe

Your crash dumps are not showing any finite probable cause. In such a situation, it is better to enable Driver Verifier to monitor the drivers.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

   Information
Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.
   Warning
Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.

   Tip


If you fail to get on the Desktop because of DV, Boot into Advanced Boot Options > Safe mode. Disable DV there. Now boot normally again, and try following the instruction of enabling DV again.If you cannot boot in Safe mode too, do a System Restore to a point you made earlier.
Let us know the results, with the subsequent crash dumps, if any.

http://www.eightforums.com/bsod-crashes-debugging/20979-bsod-hal-dll-ntoskrnl-exe.html
Relevancy 70.52%

My boss is using a computer for video editing with Premiere Pro CS for creation of commercials promo videos etc For the past few days he's been getting BSODs and all are pointing to ntoskrnl exe but that's just a general error from what I can tell It's not just during video editing either I tried reinstalling video card drivers because he reported an anomoly with it and when I went to use the check with ntoskrnl.exe BSOD for updates in the nvidia control panel it gave me an error so I did a clean install of the drivers It still BSOD'd once yesterday and BSOD with ntoskrnl.exe then this morning when I came in it had BSOD'd right before I got here and all it was doing overnight was uploading to an FTP I've got windows memory diagnostic running on it at the moment The standard test didnt reveal anything so I'm doing the extended From my initial searches though ntoskrnl exe is more of a software issue than hardware Please help I'm not sure what else to do from here EDIT I also ran sfc scannow but everything said it was okay

A:BSOD with ntoskrnl.exe

I would guess it's a problem related to your SSD-disk, try updating the firmware for it.

Edit: Also update the drivers for your Marvell disk controllers.

http://www.sevenforums.com/bsod-help-support/247192-bsod-ntoskrnl-exe.html
Relevancy 70.52%

Need help on this BSOD I got while trying to stress test my pc

A:BSOD ntoskrnl.exe

Code:
BugCheck 124, {0, fffffa800e8578f8, 0, 0}

Probably caused by : GenuineIntel

Followup: MachineOwner
---------
Which stress test you were running? Prime95?

Run it again. Hardware - Stress Test With Prime95
It saves the result as a .txt file in the prime95's folder. Upload the file for us.

Also, is the computer running hot? Report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy. Alternatively, you can publish a Speccy snapshot too: Speccy - Publish Snapshot of your System Specs .

http://www.sevenforums.com/bsod-help-support/373991-bsod-ntoskrnl-exe.html
Relevancy 70.52%

I downloaded Blue Screen View, and ntoskrnl.exe and fltmgr.sys were the highlighted files.

Here are the dumps and logs:

A:Ntoskrnl.exe BSOD.

Download and install this version of Intel Rapid Storage.

Download and install Realtek PCIE CardReader Driver from Realtek

If it still crashes, enable Driver Verifier to monitor the drivers.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.



   Information
Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.



   Warning
Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.



   Tip

If you fail to get on the Desktop because of DV, Boot into Advanced Boot Options > Safe mode. Disable DV there. Now boot normally again, and try following the instruction of enabling DV again.
If you cannot boot in Safe mode too, do a System Restore to a point you made earlier.

Let us know the results, with the subsequent crash dumps, if any.

http://www.sevenforums.com/bsod-help-support/283850-ntoskrnl-exe-bsod.html
Relevancy 70.52%

I've bought this laptop last year. After using the laptop for a week, the bsod had shown up. Until now, the bsod have been critical since its sometime occur 2-3 times in 30 mins. I hope you can help me to solve this problem thank you 
 
-Windows 10 Home x64,
-The laptop originally running on Windows 8.1. I've upgrade to Windows 10, 4 months after using this laptop.
 
Intel® Core™ i5-5200U CPU @ 2.20GHz;
AMD Radeon R5 M330 & Intel HD Graphic 5500;
Lenovo G50-80 (80E5);

A:What cause the ntoskrnl.exe bsod? Help!

There's only 1 memory dump in the uploaded reports.If using a disk cleaner (such as CCleaner), please stop while we're troubleshooting. Your UEFI/BIOS (version B0CN97WW) dates from 2016.  Please check at the manufacturer's website to see if there are any UEFI/BIOS updates available for your system.  This is just in case there has been a recent update.Only 5 Windows Update hotfixes installed.  Most build 10586 (TH2/1511) systems have more than this.  Please visit Windows Update and get ALL available Windows Updates.The actual number is not important.  Rather it's important that you checked manually, installed any available updates, and didn't experience any errors when checking or updating.Beyond this, as there was only 1 memory dump in the upload, I have these 4 suggestions:1.  Get ALL available Windows Updates.  It may take several trips to get them all2.  Get ALL available, compatible updates for your OS from the manufacturer's website (to include BIOS/UEFI).3.  Start with these free hardware diagnostics:  http://www.carrona.org/hwdiag.html4.  If all of the hardware tests pass, then run Driver Verifier according to these instructions:  http://www.carrona.org/verifier.html FYI - the memory dumps listed in the WER section of the MSINFO32 report appear to be random errors.Most random errors are due to (in this order on systems that were updated to W10):  hardware problems, compatibility issues, low-level driversThe hardware diagnostics will get a start on seeing if it's hardware, and the Driver Verifier should point out if it's a low-level driver (or maybe even a compatibility issue).Good luck! Analysis:The following is for information purposes only. The following information contains the relevant information from the blue screen analysis:**************************Fri May 27 01:56:55.416 2016 (UTC - 4:00)**************************Loading Dump File [C:\Users\john\SysnativeBSODApps\052716-17968-01.dmp]Windows 10 Kernel Version 10586 MP (4 procs) Free x64Built by: 10586.103.amd64fre.th2_release.160126-1819System Uptime:0 days 0:31:51.205*** WARNING: Unable to verify timestamp for win32kfull.sys*** ERROR: Module load completed but symbols could not be loaded for win32kfull.sysProbably caused by :win32kbase.sys ( win32kbase!GreValidateRgnInDCSurfBounds+b1 )BugCheck 50, {fffff901b46ab2b8, 0, fffff960e13bebb1, 2}BugCheck Info: PAGE_FAULT_IN_NONPAGED_AREA (50)Arguments:Arg1: fffff901b46ab2b8, memory referenced.Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.Arg3: fffff960e13bebb1, If non-zero, the instruction address which referenced the bad memory    address.Arg4: 0000000000000002, (reserved)BUGCHECK_STR:  AVDEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULTPROCESS_NAME:  explorer.exeFAILURE_BUCKET_ID: AV_R_INVALID_win32kbase!GreValidateRgnInDCSurfBoundsCPUID:        "Intel® Core™ i5-5200U CPU @ 2.20GHz"MaxSpeed:     2200CurrentSpeed: 2195  BIOS Version                  B0CN97WW  BIOS Release Date             01/08/2016  Manufacturer                  LENOVO  Product Name                  80E5  Baseboard Product             Lenovo G50-80¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨... Read more

http://www.bleepingcomputer.com/forums/t/615525/what-cause-the-ntoskrnlexe-bsod-help/
Relevancy 70.52%

Hi, I have been experiencing shutdowns which I am not sure of the reason behind. I have hibernate and sleep disabled. The computer crashes andshutdown on its own. This is only happening when getting into sleep mode. It will never happen If I am working on the laptop no matter for how long.

I looked in the crash dump and it is always pointing to ntoskrnl.exe but I am not sure of what I need to do.

I have attached the files as advised and hope that you can advice me on what is causing this issue.

thank you in advance.

A:BSOD - Ntoskrnl.exe

Please any advice or help on what might be wrong and how to be fixed.

http://www.eightforums.com/bsod-crashes-debugging/24605-bsod-ntoskrnl-exe.html
Relevancy 70.52%

ran memtest through 9 passes and found no issues

newly built machine, dump files attached

bluescreenview has said its the kernal the last 7-8 times, but I haven't been able to find any real fixes

A:BSOD from ntoskrnl.exe

Additional information is required.

1. Download the DM Log Collector application to your desktop by clicking the link below

DM Log Collector.exe

2. Run it by double-clicking the icon on your desktop, and follow the prompts.
3. Locate the .ZIP file that is created on your desktop, and upload it here in your next reply.

http://www.sevenforums.com/bsod-help-support/355453-bsod-ntoskrnl-exe.html
Relevancy 70.52%

I have been working on a new build htpc:

APU Athlon 5350 Quad Core Processor (Socket AM1, 2.05GHz, AMD Radeon 3 internal GPU)
MSI AM1I AMD Mini ITX Motherboard
Crucial CT102464BA160B 8GB DDR3 240 Pin 1.5V PC3-1600 CL11 Unbuffered UDIMM Memory Module
Samsung 840 EVO 120GB 2.5 inch Basic SATA Solid State Drive
CIT 450w Gold 12CM Silent Atx V2.3 Power Supply
Windows 8.1 x64

I am being plagued by multiple BSOD's and also a lot of Windows updates are failing to install.
I have -
the motherboard on the latest firmware
tested the RAM
tested the SSD
tried another PSU
RMA'd the processor
updated the drivers to latest versions.

I've attached a selection of BSOD dumps.
Probably the most common one is PAGE_FAULT_IN_NONPAGED_AREA 0x00000050 ntoskrnl.exe.

Hope you can shed some light on this for me .

A:ntoskrnl.exe BSOD's

I'm trying to arrange to RMA the motherboard but MSI are very slow to respond to my request.

http://www.techsupportforum.com/forums/f299/ntoskrnl-exe-bsods-1002570.html
Relevancy 70.52%

Hi.
My computer keeps getting BSOD and I using blue screen view i have discovered that it is 'ntoskrnl.exe' that is causing the problem. I cant repair install windows 7 because my computer doesnt stay around for long enough to get it running and it cant run in safe mode. I also know that it isn't RAM related and im pretty positive it isnt graphics card related.
Thanks in advance and merry christmas.

A:BSOD ntoskrnl.exe

Hi Daniel. ntoskrnl.exe is the Windows system core file and highly unlikely to be the real cause. Please read this thread, follow the instructions and post back. We will be glad to help you.

http://www.sevenforums.com/crashes-d...tructions.html

http://www.sevenforums.com/bsod-help-support/133239-bsod-ntoskrnl-exe.html
Relevancy 70.52%

BSOD started yesterday and happen most of the time when i used google chrome and when i ran a scan on MSE.

Windows 7 Ultimate 64 bit
MSI GX60
CPU:AMD A10-4600M
Graphic Card: AMD Radeon HD 7970M (2GB GDDR5)

Thank in advance and sorry for my bad grammar.

A:BSOD cause by ntoskrnl.exe

Hello Mistral.

Your crash dumps are not showing any finite probable cause.

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

If memtest comes free from errors, enable Driver Verifier to monitor the drivers.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.



   Information
Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.



   Warning
Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.



   Tip

If you fail to get on the Desktop because of DV, Boot into Advanced Boot Options > Safe mode. Disable DV there. Now boot normally again, and try following the instruction of enabling DV again.
If you cannot boot in Safe mode too, do a System Restore to a point you made earlier.

Let us know the results, with the subsequent crash dumps, if any.

Something is odd there .... about your BIOS date. We are having two different information about it.
One .... the date is 10/12/2012
The other ... the date is 10/12/2555
Have you done anything with the system date? If so, why? Let us know?

http://www.sevenforums.com/bsod-help-support/301480-bsod-cause-ntoskrnl-exe.html
Relevancy 70.52%

UPDATE Please read my most recent reply Hello I've been doing some research on this issue It appears that others have trouble with the BSOD regarding ntoskrnl exe I used a tool called quot BlueScreenView quot It basically gives me a summary of all computer crashes With an exception of a few ntoskrnl exe has been the primary cause of my BSOD My laptop has crashed before but today has been very frustrating while my computer hit BSOD times and counting I followed the instructions from - ntoskrnl.exe BSOD the sticky and included a ZIP file of BSOD's data so it can be analysed HP dv BSOD - ntoskrnl.exe t- - Windows Ultimate -bit Windows -bit Home Edition - Preinstalled I did a clean install Hardware is less than a year old OS is less than months old Intel i GB Ram Help would be appreciated Thanks Also if it would be of anymore help I could set up a remote desktop session using programs Mikogo or Team Viewer and communicate over Skype

A:BSOD - ntoskrnl.exe

The dmp(s) point to ntoskrnl.exe as the probable cause. We know this is not the case, as these are core OS files, and will definitely not cause a BSOD. They are just the default files the debuggers blame when they can't see a better cause. We need to run driver verifier to pinpoint the faulting driver...

- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out.

Then if it blue screens again upload the contents of C:\Windows\Minidump

http://www.sevenforums.com/bsod-help-support/130249-bsod-ntoskrnl-exe.html
Relevancy 70.52%

Hello, this is a recurring (about once a day) BSOD I have with a new system with Win7 Home Premium 64bit installed.

The problem started a few days after acquiring the PC. The PC was assembled by a shop with parts selected by me.

ASRock 890GX Extreme3
AMD Athlon II X3 445
Corsair 4GB DDR3-1333 TW3X4G1333C9A
EVGA GTX460 768 MB


Reading the minidump files (see attachment) tells me it's ntoskrnl.exe.

What should I do now?


Thanks in advance for all your help.

A:ntoskrnl.exe BSOD with new PC

Anyone have any idea.

http://www.sevenforums.com/bsod-help-support/128864-ntoskrnl-exe-bsod-new-pc.html
Relevancy 70.52%

hi, im having random BSOD's.. i use bluescreenview to check my dmp files.. and the common issue (cause its always saying something else in BSOD) is ntoskrnl.exe.. i uploaded all of my dmp files here..

i run memtest + i sent my ram's to warranty and they are ok they say.. i never have any problems when i was using xp professional..

A:BSOD ntoskrnl.exe

Ill have a look at em, but for now .. The dmp(s) point to ntkrpamp.exe or ntoskrnl.exe as the probable cause. We know this is not the case, as these are core OS files, and will definitely not cause a BSOD. They are just the default files the debuggers blame when they can't see a better cause. To pin the problem down, enable driver verifier..

- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

http://www.sevenforums.com/bsod-help-support/102370-bsod-ntoskrnl-exe.html
Relevancy 70.52%

OS - Windows x -bit or x x What was the original installed OS on sthe ystem Help 7 BSOD ntoskrnl.exe Win XP Is the OS an OEM version came pre-installed on system or full retail version YOU purchased it from retailer Full Retail Approximate age of system hardware Oldest part is the HDD which is very old maybe years the rest are all around - years old except the motherboard ram which are around - Approximate age of OS installation if you know about years Have you re-installed the OS not recently but i have some months ago CPU AMD Phenom II X Video Card AMD Radeon Win 7 ntoskrnl.exe BSOD Help HD Gigabyte MotherBoard BIOSTAR Group Win 7 ntoskrnl.exe BSOD Help TA GXE Power Supply - brand amp wattage don't know but it isn't more than y o I haven't had a problem when playing games or anything until this point Laptop or Desktop Desktop Extra info that I figured out BSOD codes are x SYSTEM THREAD EXCEPTION NOT HANDLED and x a IRQL NOT LESS OR EQUAL common with all of these is an error with the ntoskrnl exe all with different suffixes ntoskrnl exe f d d e f bf are the ones I have gotten most recent common is f d The only check I've ran so far is a memory check off of windows but I can do more if needed Ram Win 7 ntoskrnl.exe BSOD Help checked out okay Most of the crashes occur when I play games CS GO for example but I have experienced some when just googling or just on chrome This is all I can think of at the moment any help is great Thanks

Relevancy 70.52%

I have been getting at least one BSOD every day for the past few months and only recently has it gotten really bad. I can barely do anything when i turn on my PC before it crashes. I have the log from dm log collector here. if you need anymore information please ask.

Specs:
intel i3 3790
Sapphire radeon 7850 2gb
8g Gskill ripjaws RAM
GIGABYTE: Z87M-D3H
Corsair cx 500 watt power supply
Windows 7 hoem premium 64 bit

A:ntoskrnl.exe BSOD

Test your HDD using Data Lifeguard Diagnostic for Windows. Take both the short test and the extended test. Let us know the results.
_________________________________________________________

Code:
BugCheck F4, {3, fffffa8008f34b30, fffffa8008f34e10, fffff800031c1940}

----- ETW minidump data unavailable-----
Probably caused by : wininit.exe

Followup: MachineOwner
---------

http://www.sevenforums.com/bsod-help-support/369117-ntoskrnl-exe-bsod.html
Relevancy 70.52%

my pc keeping getting bsod i dont know why it keeps doing it. if anyone could help me fix this it would be much appreciated. 

A:ntoskrnl.exe bsod

Hello,
Here's the file you attached "082013-25318-01.dmp" read using the program BlueScreenView.
This helps for quick reference so you and others won't have to download and read a dmp file.
8/20/2013 7:04:54 PM
KMODE_EXCEPTION_NOT_HANDLED
0x0000001e ffffffff`c0000005 fffff800`02d00247 00000000`00000000 00000000`7fef205b
Caused by file: ntoskrnl.exe
 
From googling "KMODE_EXCEPTION_NOT_HANDLED" and remembering the first error code is 0x1E...
Possible troubleshooting:1. Download and install updates and device drivers for your computer from Windows Update.
2. Scan your computer for computer viruses. (Use Malwarebytes Anti Malware and similar)
3. Check your hard disk for errors. (Use command /sfc scannow and chkdsk /f)
4. Try booting to your windows install CD and doing a repair.
5. Follow this advice: http://www.tomshardware.com/forum/269897-45-ntoskrnl-corrupt, where they boot to the windows install CD and copy over a fresh ntoskrnl.exe
6. Others reported just going into the BIOS and resaving the settings to update the CMOS.
7. Others reported finding out of date or corrupted drivers, even a person's USB 3.0 driver: http://www.pchelpforum.com/xf/threads/bsod-on-windows-7-ntoskrnl-exe.145569/
8. Keep googling based on this information and your DMP file.9. If all else fails, save data to another drive and reinstall windows!
Good luck!

http://www.bleepingcomputer.com/forums/t/505065/ntoskrnlexe-bsod/
Relevancy 70.52%

Deleted

A:Ntoskrnl.exe BSOD

Bump

Any feedback and/or help is greatly appreciated.

http://www.sevenforums.com/bsod-help-support/204799-ntoskrnl-exe-bsod.html
Relevancy 70.52%

Hi all i have windows ultimate everything worked fine till this morning lately i had some bsod appearing in BSOD ntoskrnl Win with 7 and Help oncei n a while but after a couple of reboot everything worked fine again til ltoday Help with BSOD in Win 7 and ntoskrnl when the pc stay on for mintues then get the bsod again i checked the minidump and it appeared that the problem was due to Poweriso virtual drive so i removed the driver the program and everything related Help with BSOD in Win 7 and ntoskrnl to it but still no avail the minidump though mention that the problem is notskrnl exe what it could be i haven t installed anything recently beside that poweriso program and all dirvers are up to date here s the dump hoep someone can help me forgot to add i also have daemont tools as a virtua ldrive but i never had trobules with that although some peopel states ti could eb the problem also in safe mode everything seems to work fine so it must be something related to a software issue and not hardwre as i thought also the windows quot slvinc pc issues quot that appears on the bottom right of teh task bar says this quot Download updates for PX Engine PX Engine has stopped working properly and give me a link to the roxio web page i never had any roxio cd burning programs nor driver or device so i don t know where windows took this thing anyway i installed the driver the link gave me and still no solution nbsp

A:Help with BSOD in Win 7 and ntoskrnl

i need help,if anyone knowas nttyhing,please reply
 

http://www.techspot.com/community/topics/help-with-bsod-in-win-7-and-ntoskrnl.157919/
Relevancy 70.52%

Hello everyone
After reading many forums i still can't find an answer for the following problem:

My system was running perfectly until i decided to change the GPU, from a GTX 8800 to a MSI 560 Ti Hawk.

During games or video editing programs i get BSOD crashes which appear randomly. I have also attached the minidump.
The problem seems to be pointing at:
ntoskrnl.exe
Unable to load image \SystemRoot\system32\ntoskrnl.exe, Win32 error 0n2

I have tried both to run memtest over night and also video memory test. No error here...

When i run driver verifier (start->verifier.exe) and choose the ntoskrnl.exe file, upon restart i can not boot in windows (same BSOD). I can only run system restore to log back in.

System specs:
Intel Q6600
asus mobo
4GB memory
MSI gtx 560 Ti Hawk
Thanks everyone for taking you time to help.

A:BSOD from ntoskrnl.exe

Hello,

I wonder if your PSU might be underpowering your new card. The old card demanded 105w, the new one 170. What is the make/model of your PSU?

...Summary of the dumps:

Code:

Built by: 7601.17592.amd64fre.win7sp1_gdr.110408-1631
Debug session time: Mon Jul 18 17:46:42.670 2011 (UTC - 4:00)
System Uptime: 0 days 23:21:47.340
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+4621f )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x50
PROCESS_NAME: svchost.exe
FAILURE_BUCKET_ID: X64_0x50_nt!_??_::FNODOBFM::_string_+4621f
BiosReleaseDate = 12/14/2007
SystemProductName = Maximus Formula
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.17592.amd64fre.win7sp1_gdr.110408-1631
Debug session time: Sun Jul 17 17:11:28.177 2011 (UTC - 4:00)
System Uptime: 0 days 1:41:02.473
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : dxgkrnl.sys ( dxgkrnl!memcpy+60 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x50
PROCESS_NAME: dwm.exe
FAILURE_BUCKET_ID: X64_0x50_dxgkrnl!memcpy+60
BiosReleaseDate = 12/14/2007
SystemProductName = Maximus Formula
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.17592.amd64fre.win7sp1_gdr.110408-1631
Debug session time: Thu Jul 21 17:33:47.833 2011 (UTC - 4:00)
System Uptime: 0 days 0:00:46.519
Probably caused by : ntkrnlmp.exe ( nt!VerifierBugCheckIfAppropriate+3c )
BUGCHECK_STR: 0xc4_13c
DEFAULT_BUCKET_ID: VERIFIER_ENABLED_VISTA_MINIDUMP
PROCESS_NAME: svchost.exe
FAILURE_BUCKET_ID: X64_0xc4_13c_VRFK_nt!VerifierBugCheckIfAppropriate+3c
BiosReleaseDate = 12/14/2007
SystemProductName = Maximus Formula
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.17592.amd64fre.win7sp1_gdr.110408-1631
Debug session time: Thu Jul 21 18:29:37.998 2011 (UTC - 4:00)
System Uptime: 0 days 0:00:50.668
Probably caused by : ntkrnlmp.exe ( nt!VerifierBugCheckIfAppropriate+3c )
BUGCHECK_STR: 0xc4_13c
DEFAULT_BUCKET_ID: VERIFIER_ENABLED_VISTA_MINIDUMP
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0xc4_13c_VRFK_nt!VerifierBugCheckIfAppropriate+3c
BiosReleaseDate = 12/14/2007
SystemProductName = Maximus Formula
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.17592.amd64fre.win7sp1_gdr.110408-1631
Debug session time: Thu Jul 21 15:22:11.656 2011 (UTC - 4:00)
System Uptime: 0 days 8:35:19.326
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+4621f )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x50
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0x50_nt!_??_::FNODOBFM::_string_+4621f
BiosReleaseDate = 12/14/2007
SystemProductName = Maximus Formula
??????????????????????????????????????????????????????????????????????????????????????``

http://www.sevenforums.com/bsod-help-support/176472-bsod-ntoskrnl-exe.html
Relevancy 70.52%

Hello I would need some help about the analysis of a random BsoD It is TOTALLY random on BSOD (Mostly) ntoskrnl.exe a fresh Windows installation In the following is attached the report from the utility quot whocrashed quot which just does a recap of all the dmp files I have no idea on how to analyze it Any suggestion It seems like of the (Mostly) ntoskrnl.exe BSOD crashes are caused by quot ntoskrnl exe quot It might be a RAM issue I have run Memtest flawless runs My OS is Win Home and the RAMs are running at the correct voltage Thanks a lot in advance for your help Quote On Sun your computer crashed This was likely caused by the following module atikmpag sys Bugcheck code x B xC xFFFFF EDE xFFFFF F x Error SYSTEM SERVICE (Mostly) ntoskrnl.exe BSOD EXCEPTION Dump file C Windows Minidump - - dmp file path C (Mostly) ntoskrnl.exe BSOD Windows system drivers atikmpag sys product AMD driver company Advanced Micro Devices Inc description AMD multi-vendor Miniport Driver On Tue your computer crashed This was likely caused by the following module ntoskrnl exe Bugcheck code x xFFFFDA x xFFFFF F D E x Error PAGE FAULT IN NONPAGED AREA Dump file C Windows Minidump - - dmp file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System The crash took place in a standard Microsoft module Your system configuration may be incorrect possibly the culprit is in another driver on your system which cannot be identified at this time On Tue your computer crashed This was likely caused by the following module ntoskrnl exe Bugcheck code x xFFFFD A F x xFFFFF FA F x Error PAGE FAULT IN NONPAGED AREA Dump file C Windows Minidump - - dmp file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System The crash took place in a standard Microsoft module Your system configuration may be incorrect possibly the culprit is in another driver on your system which cannot be identified at this time On Sat your computer crashed This was likely caused by the following module ntoskrnl exe Bugcheck code x xFFFFB C EAF x xFFFFF A C x Error PAGE FAULT IN NONPAGED AREA Dump file C Windows Minidump - - dmp file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System The crash took place in a standard Microsoft module Your system configuration may be incorrect possibly the culprit is in another driver on your system which cannot be identified at this time On Sat your computer crashed This was likely caused by the following module ntoskrnl exe Bugcheck code xA xFFFFBA x x xFFFFF A Error IRQL NOT LESS OR EQUAL Dump file C Windows Minidump - - dmp file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System The crash took place in a standard Microsoft module Your system configuration may be incorrect possibly the culprit is in another driver on your system which cannot be identified at this time On Tue your computer crashed This was likely caused by the following module ntoskrnl exe Bugcheck code xA xFFFFBA D CDF x x xFFFFF B A F Error IRQL NOT LESS OR EQUAL Dump file C Windows Minidump - - dmp file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System The crash took place in a standard Microsoft module Your system configuration may be incorrect possibly the culprit is in another driver on your system which cannot be identified at this time On Tue your computer crashed This was likely caused by the following module ntoskrnl exe Bugcheck code x xFFFFBA DE CC x xFFFFF AEFCF x Error PAGE FAULT IN NONPAGED AREA Dump file C Windows Minidump - - dmp file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation descri... Read more

A:(Mostly) ntoskrnl.exe BSOD

Please follow these directions: http://www.sevenforums.com/crashes-d...tructions.html

http://www.sevenforums.com/bsod-help-support/98277-mostly-ntoskrnl-exe-bsod.html
Relevancy 70.52%

Hello guys I quot ve been getting blue screens for quite a while now and can't seem to figure out what the hell is going on I'm BSOD ntoskrnl.exe thinking its a memory problem but lets see what you guys think If you need any other information let me know On Mon PM GMT your computer crashed crash dump file C Windows Minidump - - dmp This was probably caused by the following module ntoskrnl exe nt x Bugcheck code x E xFFFFFFFFC xFFFFF F B x x E Error KMODE EXCEPTION NOT HANDLED file path BSOD ntoskrnl.exe C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System Bug check description This indicates that a kernel-mode program generated an exception which the error handler did not catch This appears BSOD ntoskrnl.exe to be a typical software driver bug and is not likely to be caused by a hardware problem The crash took place in the Windows kernel Possibly this problem is caused by another driver that cannot be identified at this time

A:BSOD ntoskrnl.exe

Usb 3.0 driver was out of date.

http://www.sevenforums.com/bsod-help-support/303434-bsod-ntoskrnl-exe.html