Windows Support Forum

BSoD x024, hal.dll+12a3b

Q: BSoD x024, hal.dll+12a3b

Ok, so this is actually the third time I've posted here. I keep getting BSoD about once a week, I post here, someone suggests a driver update, I update that driver, then everything seems fine. Then about a week later it crashes again. I don't overclock my system, nothing is over-heating, and at this point I think I've updated all my drivers and Bios. I could be wrong though. I apologize if I'm just an idiot or something and am missing something obvious, but any help would be appreciated. Please see attached .zip file.

Relevancy 100%
Preferred Solution: BSoD x024, hal.dll+12a3b

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: BSoD x024, hal.dll+12a3b

1: Avast is causing issues.


Code:
fffff880`0a1f5818 fffff880`03e2b7fbUnable to load image \SystemRoot\system32\drivers\aswSnx.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for aswSnx.sys
*** ERROR: Module load completed but symbols could not be loaded for aswSnx.sys
aswSnx+0xe7fb
Uninstall Avast and Install MS Security Essentials and MalwareBytes.



Note
Make sure you uncheck the 'Enable Free Trial' box when installing.


2: Your ATI driver is old and needs updating.


Code:
0: kd> lmvm atikmdag
start end module name
fffff880`0482b000 fffff880`05341000 atikmdag T (no symbols)
Loaded symbol image file: atikmdag.sys
Image path: \SystemRoot\system32\DRIVERS\atikmdag.sys
Image name: atikmdag.sys
Timestamp: Wed Dec 19 20:38:55 2012 (50D225DF)
CheckSum: 00AC6529
ImageSize: 00B16000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Download the 13.9 driver from here then use AMD Uninstall Utility to remove all traces of your current driver, CCC etc. Reboot and install the 13.9 driver.



Note
When installing choose 'Advanced' or 'Custom' (whichever option is available, just not Express) and uncheck everything except the video driver.
3: You've also received a few 0x124s which denote a hardware issue, but none of them are giving anything away as to what the issue actually is. Some of your other STOPs are pointing towards possible memory corruption though, so before we go into the full catalogue of hardware checks to stress your system follow the tutorial below to test your RAM first.


Code:
1: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa8007aab028, Address of the WHEA_ERROR_RECORD structure.
Arg3: 00000000b60e4000, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000000000135, Low order 32-bits of the MCi_STATUS value.
Download and run MemTest86+ to test your RAM.



Note
Run MemTest86+ for at least 8 passes. Ideally set it off before you go to bed and leave it overnight, we're looking for zero errors here. A single error will show something's going bad with your RAM.
It's possible your BIOS may be causing issues as it's quite old and may need updating, however we'll leave that until very last as flashing your BIOS does carry a substantial amount of risk which could lead to you turning your PC into a potato.

Did you actually update your BIOS in between some of these dumps occurring?


Code:
1: kd> !sysinfo machineid
Machine ID Information [From Smbios 2.5, DMIVersion 0, Size=2420]
BiosMajorRelease = 8
BiosMinorRelease = 15
BiosVendor = American Megatrends Inc.
BiosVersion = 0211
BiosReleaseDate = 07/08/2009

Code:
1: kd> !sysinfo machineid
Machine ID Information [From Smbios 2.5, DMIVersion 0, Size=2420]
BiosMajorRelease = 8
BiosMinorRelease = 15
BiosVendor = American Megatrends Inc.
BiosVersion = 2105
BiosReleaseDate = 07/23/2010

http://www.sevenforums.com/bsod-help-support/336994-bsod-x024-hal-dll-12a3b.html
Relevancy 63.64%

hi guys,

i have experienced a BSOD. in attachment is a .zip with all data.

http://www.sevenforums.com/bsod-help-support/392165-bsod-hal-dll-12a3b.html
Relevancy 63.64%

ntoskrnl.exe+18c453
Funny thing is that i have router and bsod happens parallel(not always) on both computers
///
please help

A:BSOD while browsing/downloading torrents hal.dll+12a3b bsod/ntoskrnl

Hi,
Unfortunately the installation is counterfeit.
The Key is that of a Dell OEM computer - and the motherboard is a retail one by Asus.



The best course of action is to:Purchase a legitimate Windows 7 licence.
Format the HDD.
Reinstall Windows and activate.

http://www.sevenforums.com/bsod-help-support/304027-bsod-while-browsing-downloading-torrents-hal-dll-12a3b-bsod-ntoskrnl.html
Relevancy 62.78%

Hello all - I need help figuring out what is causing this BSOD. This is occurring during gaming after several straight hours. CPU is currently not overclocked. Here is the BSV report:

==================================================
Dump File : 081113-5928-01.dmp
Crash Time : 8/11/2013 1:50:00 AM
Bug Check String :
Bug Check Code : 0x00000124
Parameter 1 : 00000000`00000000
Parameter 2 : fffffa80`0d4de028
Parameter 3 : 00000000`be000000
Parameter 4 : 00000000`0100110a
Caused By Driver : hal.dll
Caused By Address : hal.dll+12a3b
File Description : Hardware Abstraction Layer DLL
Product Name : Microsoft? Windows? Operating System
Company : Microsoft Corporation
File Version : 6.1.7601.17514 (win7sp1_rtm.101119-1850)
Processor : x64
Crash Address : ntoskrnl.exe+75c00
Stack Address 1 :
Stack Address 2 :
Stack Address 3 :
Computer Name :
Full Path : C:\Windows\Minidump\081113-5928-01.dmp
Processors Count : 4
Major Version : 15
Minor Version : 7601
Dump File Size : 292,992
Dump File Time : 8/11/2013 1:50:30 AM
==================================================

Any guidance would be greatly appreciated...I hate these kinds of problems I just built my computer it is only 1 week old... :(

A:BSOD hal.dll+12a3b (Merged)

Hi,

Please refer to the following thread and reply back accordingly with the required information - http://www.techsupportforum.com/foru...ta-452654.html

Regards,

Patrick

http://www.techsupportforum.com/forums/f299/bsod-hal-dll-12a3b-merged-704344.html
Relevancy 62.78%

Hi there so recently I've changed my PC set mb to Gigabyte GA-Z -HD CPU to i - k GPU to MSI GTX G After a week or Random 'hal.dll+12a3b' BSOD so random BSOD came by to say 'hello' to me RAM SSD PSU and other stuff are exactly the Random BSOD 'hal.dll+12a3b' same as previous PC and worked fine before changing Most of the time BSOD happen' when system is working on IDLE Never happen during gaming nor watching movie Temps are OK I did reset my CMOS setting as this CPU was OC'd to GHz now on default RAM seems to be OK although didn't test it in memtest yet but Random BSOD 'hal.dll+12a3b' as mentioned weeks ago on old setup didn't notice any BSOD for a very long time Gigabyte's EasyTune was also removed All drivers are up to date same for win updates thank Random BSOD 'hal.dll+12a3b' you in advance for your time and help Karol EDIT Memtest passed I did my own investigation while waiting to reply found out ubssrv oc only is common failure process Regarding to some posts few from here I've uninstalled iCloud app from Gigabyte Will update this thread if its gonna fix BSODs

A:Random BSOD 'hal.dll+12a3b'

Your latest dumps are all 124 errors and these are typically related to a hardware issue and can only be isolated by stress testing the major components.

If overclocking, reset all overclocks back to their default settings and then follow these:
RAM - run for a minimum of 8 consecutive passes
RAM - Test with Memtest86+
CPU - run the HIGH test
CPU - Stress Test Using IntelBurnTest
Video - run the FURMARK test for 20mins
Graphics Card Problems - Diagnose
Video Card - Stress Test with Furmark
Storage - run the SHORT test using the DOS version
SeaTools for DOS and Windows - How to Use


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 124, {0, fffffa800767f028, bf800000, 200401}
Probably caused by : GenuineIntel
Followup: MachineOwner
---------

http://www.sevenforums.com/bsod-help-support/368412-random-bsod-hal-dll-12a3b.html
Relevancy 62.35%

Hi,

ive been getting these BSOD's for a while now, but only when playing certain games(Mostly HoN, Dota2, WoW, assassins creed etc) they never happen when im using the PC for other requirements.

I've tried re seating the RAM/Vid card etc, nothing helps. I even open it up weekly and clean out the dust from it.

Im currently in the process of removing on certain RAM modules and will try my older video card as well.

My system specs are as follows :

Windows 7 Ultimate 64bit

Intel Core i7 920 @2.67 Ghz

RAM : 12gb DD3

GFX : Nvidia GTX 460 cyclone

MB : Msi X-58 Pro E



Any help would be appreciated!

A:BSOD while gaming only Hal.dll+12a3b, 0x124

1. Your .dmp file shows a stop error of 0x124 which is a general hardware error .





Quote:
A "stop 0x124" is fundamentally different to many other types of bluescreens because it stems from a hardware complaint.

Stop 0x124 minidumps contain very little practical information, and it is therefore necessary to approach the problem as a case of hardware in an unknown state of distress


Some generic advice.

If you are overclocking STOP. Return to the default settings at least for now.
If you are running a RAID update its driver.
You can read more on this error and what to try here... Stop 0x124 - what it means and what to try
2. Avast can be a contributing cause of BSOD'S .
Please remove and replace with Microsoft Security Essentials AT LEAST TO TEST
http://files.avast.com/files/eng/aswclear5.exe

http://www.microsoft.com/security_essentials/

http://www.sevenforums.com/bsod-help-support/216251-bsod-while-gaming-only-hal-dll-12a3b-0x124.html
Relevancy 62.35%

Hello Ive been building or shall i say slowly putting this computer together for close to years now This past year ive been running Hal.dll+12a3b/ntoskrnl.exe+18c633 Bsod into problem after problem and me and my Bsod Hal.dll+12a3b/ntoskrnl.exe+18c633 buddies are stumped by its recent issues st off about months back i had a nvidia gtx ti which burnt out stopped working entirely and i had a stick of my corsair vengeance go bad as well tested with memtest and all kinds of other diagnosis tools indicated bad stick i rma'd those and sold theem to a friend and recently bought a xfx Hd and gb of corsair dominator computer started off rrunning good no Bsods no crashes until this morning installed Planet side logged in played for minutes and the computer rebooted i checked my temps and i was getting a faulty temp from Bsod Hal.dll+12a3b/ntoskrnl.exe+18c633 hwmonitor so i went into my bios to see my mobo temps everything looked nice a cool discarded changes and exited the bios and it went straight into a minidump Bsod i currently have nirsoft bluescreeen viewer on and of the errors are highlighted pink Hal dll a b and ntoskrnl exe c ive cleaned and repaired my registry repaired my windows updated all drivers clean please if anyone can help with this post i'll be your bestfriend for life asus p z deluxe gen mobo corsair iforce gb ssd gb corsair dominator xfx hd- GPU corsair HX PSU Corsair h- cooler corsair d case intel i k Not overclocking

A:Bsod Hal.dll+12a3b/ntoskrnl.exe+18c633

Look at this link and post your BSOD dmp file Blue Screen of Death (BSOD) Posting Instructions

http://www.sevenforums.com/bsod-help-support/279931-bsod-hal-dll-12a3b-ntoskrnl-exe-18c633.html
Relevancy 62.35%

I have currently re-installed win the only software on the system is the software you wanted to grab the files and bluescreen view chrome BSOD ntoskrnl.exe+18d7d3 HAL.DLL+12a3b I believe that's it I tried many different things to figure out what the problem is as well as the clean install and the laptop still crashes as far as I can tell my drivers are up to date After using the diagnostic tool I actually read through some of the info and think maybe one of the issues might be the fan my laptop is just going on yrs old so I can't see why anything else could really be wrong I'm really at a lost here PLEASE HELP ME I've done the mem check that came back fine although I haven't figured out how to see how hot the computer or components are ggrrr at this point installing or checking anything is a hit or miss because it will crash so fast I've attached the requested info Please and thank you for your time in advance

A:BSOD HAL.DLL+12a3b ntoskrnl.exe+18d7d3

Hi and welcome to SF ladymflowers .

The BSOD's you are experiencing, BCC 0x124, are of the most generic type which offer little information
as what is actually causing them.






Quote:
A "stop 0x124" is fundamentally different to many other types of bluescreens because it stems from a hardware complaint. Stop 0x124 minidumps contain very little practical information, and it is therefore necessary to approach the problem as a case of hardware in an unknown state of distress. - H2SO4


All eleven dump files are pointing to the same core, bank and L1 cache data read error
so it seems as if we are dealing with a faulty CPU but I don't have the full picture as of yet
and thermals and RAM may be the factor in this case.


Code:
Error Type : Cache error
Operation : Data Read

===============================================================================
Section 2 : x86/x64 MCA
-------------------------------------------------------------------------------
Descriptor @ fffffa8003ecd148
Section @ fffffa8003ecd2d0
Offset : 664
Length : 264
Flags : 0x00000000
Severity : Fatal

Error : DCACHEL1_DRD_ERR (Proc 0 Bank 0)
Status : 0xb66ac00000000135
Address : 0x000000004c3b10d0
Misc. : 0x0000000000000000
Test for thermals and stability:
Download HWinfo and post a Screenshot of the 'sensors only' window, one at idle and another while putting load on the PC using Prime95 for the CPU.Before running Prime95 make sure to enable Round-off checking (see 1st post under the tutorial).
Reset the BIOS back to default:CLR CMOS


   Note
Write down the current value of the SATA Mode!
Its either AHCI or IDE.
After resetting the CMOS go back and verify the value for SATA Mode is what it was
when the OS was installed.



Seeing you have two RAM sticks, please remove one and assess the situation.
Then do the same with the latter.

Keep us posted.
Good places to read more:
Stop 0x124 - what it means and what to try
Stop 0x124 Troubleshooting - 'New Method'

http://www.sevenforums.com/bsod-help-support/319087-bsod-hal-dll-12a3b-ntoskrnl-exe-18d7d3.html
Relevancy 61.49%

I get a random bsod, most times when the computer is idle.

bluescreenview shows it getting hal dll 12a3b ntoskrnl exe+18dc33 errors

Things i have tried and still getting blue screens
-Put one RAM stick at a time, in the different slots
-I dl'ed Speccy and my temps are in the 40s
-Cleared CMOS
-Updated my BIOS software to latest
-Updated my SSD to latest hardware

Build
CPU: Intel Pentium G3258 3.2GHz Dual-Core Processor
CPU Cooler: Arctic Cooling Freezer 7 Pro Rev.2 45.0 CFM Fluid Dynamic Bearing CPU Cooler
Motherboard: Gigabyte GA-Z97-HD3 ATX LGA1150 Motherboard
Memory: Corsair Vengeance 8GB (2 x 4GB) DDR3-1600 Memory
Storage: Crucial MX100 128GB 2.5" Solid State Drive
Storage: Western Digital Caviar Blue 1TB 3.5" 7200RPM Internal Hard Drive
Video Card: MSI Radeon R9 290 4GB TWIN FROZR Video Card
Case: Corsair SPEC-03 Red ATX Mid Tower Case
Power Supply: Enermax 600W 80+ Platinum Certified Semi-Modular ATX Power Supply
DRW-24B1ST/BLK/B/AS

A:Random BSOD - hal dll 12a3b ntoskrnl exe+18dc33

Hey there! That's an awesome PC you've got there. Anyways lets get to troubleshooting. Also never use BlueScreenView, it's always inaccurate.
Code:
MODULE_NAME: hardware

IMAGE_NAME: hardware

DEBUG_FLR_IMAGE_TIMESTAMP: 0

FAILURE_BUCKET_ID: X64_0x124_GenuineIntel_PROCESSOR_MAE

BUCKET_ID: X64_0x124_GenuineIntel_PROCESSOR_MAE
Hmm, run IntelBurnTest. If the temps go to far then shut IntelBurnTest down. This might be two things, the CPU is failing or the cooler is bad.

http://www.sevenforums.com/bsod-help-support/376416-random-bsod-hal-dll-12a3b-ntoskrnl-exe-18dc33.html
Relevancy 61.06%

When I use my computer normally (as in, just browsing the internet), my computer will often lock up, then restart. I did not think it was a BSOD at first, but occasionally I would actually get the bluescreen, and crash dump files were created.

A strange thing about this BSOD is that I never get it while playing games. The sole exception is the game Path of Exile, but since no dump file is created after a Path of Exile crash, it is probably a separate problem. This problem only occurs while I am doing something mundane that does not use my processor power/memory, apparently.

Here's my Diagnostic .zip. Hopefully one of you guys can enlighten me on what the problem is.

A:BSOD during regular computer use, hal.dll+12a3b & ntoskrnl.exe+18c453

A "stop 0x124" is fundamentally different to many other types of bluescreens because it stems from a hardware complaint. Stop 0x124 minidumps contain very little practical information, and it is therefore necessary to approach the problem as a case of hardware in an unknown state of distress. You can read more on this error and what to try here... Stop 0x124 - what it means and what to try: Stop 124 - What it means and what to try


Code:
Microsoft (R) Windows Debugger Version 6.2.9200.20512 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\USER\Downloads\SF_Logmore\SF_27-10-2013\102713-30716-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.18229.amd64fre.win7sp1_gdr.130801-1533
Machine Name:
Kernel base = 0xfffff800`03667000 PsLoadedModuleList = 0xfffff800`038aa6d0
Debug session time: Sun Oct 27 22:53:06.071 2013 (UTC + 6:00)
System Uptime: 0 days 0:08:21.804
Loading Kernel Symbols
...............................................................
................................................................
..........................
Loading User Symbols
Loading unloaded module list
......
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 124, {0, fffffa8007e32028, f2000040, 800}

Probably caused by : GenuineIntel

Followup: MachineOwner
---------

3: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa8007e32028, Address of the WHEA_ERROR_RECORD structure.
Arg3: 00000000f2000040, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000000000800, Low order 32-bits of the MCi_STATUS value.

Debugging Details:
------------------
BUGCHECK_STR: 0x124_GenuineIntel

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

PROCESS_NAME: firefox.exe

CURRENT_IRQL: f

STACK_TEXT:
fffff880`02fdda58 fffff800`03630a3b : 00000000`00000124 00000000`00000000 fffffa80`07e32028 00000000`f2000040 : nt!KeBugCheckEx
fffff880`02fdda60 fffff800`037f3453 : 00000000`00000001 fffffa80`07e33d30 00000000`00000000 fffffa80`07e33d80 : hal!HalBugCheckSystem+0x1e3
fffff880`02fddaa0 fffff800`03630700 : 00000000`00000728 fffffa80`07e33d30 fffff880`02fdde30 fffff880`02fdde00 : nt!WheaReportHwError+0x263
fffff880`02fddb00 fffff800`03630052 : fffffa80`07e33d30 fffff880`02fdde30 fffffa80`07e33d30 00000000`00000000 : hal!HalpMcaReportError+0x4c
fffff880`02fddc50 fffff800`0362ff0d : 00000000`00000004 00000000`00000001 fffff880`02fddeb0 00000000`00000000 : hal!HalpMceHandler+0x9e
fffff880`02fddc90 fffff800`03623e88 : 00000000`00000020 fffff880`009b0590 00000000`00000000 00000000`00000000 : hal!HalpMceHandlerWithRendezvous+0x55
fffff880`02fdd... Read more

http://www.sevenforums.com/bsod-help-support/309747-bsod-during-regular-computer-use-hal-dll-12a3b-ntoskrnl-exe-18c453.html
Relevancy 61.06%

So I recently built a friend a new computer and he has been receiving a ton of bsods I have re installed video drivers, updated windows 7. Did countless hardware test(Video ram, check memory, Cpu test) temperatures stay around 25-35 c.
Recently uninstalled all video drivers and re installed and the bsods went away for a week or so he recently got a bsod. Is this hardware or software how do I fix these errors?

Relevancy 60.2%

The title is pretty self-explanatory; I keep getting BSOD on steam games, particularly DotA and Civ V. I've been supremely bored without my vidjya, so any help would be much appreciated! I've attached the requisite BSOD paperwork, and am pasting some more stuff, and my system specs should be in my profile.

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033


Additional information about the problem:
BCCode: 124
BCP1: 0000000000000000
BCP2: FFFFFA8008323028
BCP3: 00000000B6004000
BCP4: 00000000DC000175
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1


Files that help describe the problem:
C:\Windows\Minidump\061114-19515-01.dmp
C:\Users\Andrew\AppData\Local\Temp\WER-27580-0.sysdata.xml

Bug Check Code:

0x00000124

Caused by Driver:

hal.dll

Last Two attempted addresses
Filename: Address in Stack:

hal.dll hal.dll+12a3b


ntoskrnl.exe ntoskrnl.exe+18c463

A:BSOD playing Steam games, Bug 0x00000124, Driver: hal.dll+12a3b

Hello, and welcome to SevenForums!

First of all, have you overclocked your graphics card at all?

The 0x00000124 error code appears during a hardware complaint, such as overheating. If you have overclocked your GPU, RESET IT IMMEDIATELY. This could be causing numerous critical errors in your GPU, causing the whole system to crash. Also, overclocking can severely damage your GPU. I would only recommend it if you know what you are doing and are not just following a tutorial.

But, this could be other things too. I see that your GPU driver is WAY out-of-date. Download the latest drivers via the AMD website.

Best of luck,

PeregrineX

http://www.sevenforums.com/bsod-help-support/335037-bsod-playing-steam-games-bug-0x00000124-driver-hal-dll-12a3b.html
Relevancy 60.2%

Hello everybody I just have this custom PC BSOD hal.dll+12a3b x64, error Windows 0x00000124 ntoskrnl.exe+748c0 for Home use I have used it around a month The PC had worked very good but weeks ago my wife had to use it for children's homework Just when she logged into her user account the BSOD appeared after around seconds the BSOD disappeared an the PC automatically restarted So she was into this loop until I told her to force shut down When I was home I ran Windows into Safe Mode and there everything was ok I thought it could BSOD Windows x64, error 0x00000124 hal.dll+12a3b ntoskrnl.exe+748c0 be a problem of RAM memory or maybe a faulty HDD I tested the RAM for about minutes and everything was ok tested the HDD with HD Sentinel software all the tests were perfect SMART indicators are also OK as expected of a nearly new HDD I think its a problem of drivers the PC has BSOD Windows x64, error 0x00000124 hal.dll+12a3b ntoskrnl.exe+748c0 a ZOGIS GT- Pci-Ex card but the mainboard Gygabyte B M-D V has its own Video Chip that is disabled on the BIOS Then I disabled the Pci-Ex and enabled the internal Video card but the result was the same BSOD Other peripherals used are a Genius USB Facecam and an EPSON L printer both are now BSOD Windows x64, error 0x00000124 hal.dll+12a3b ntoskrnl.exe+748c0 disconnected of the PC Please let me know what more can I do or how to test the drivers I will post any news here Thanks for your help in advance

A:BSOD Windows x64, error 0x00000124 hal.dll+12a3b ntoskrnl.exe+748c0

Basically a 0x00000124 is a hardware issue; but it may be caused by anything and everything associated with the computer.

The crash dumps provide very less information in the 0x00000124 dumps. And there is only one crash dump which is unfortunately having symbol error and so I failed to read it properly.

Anyway, a single BSOD may always be treated as a glitch. If the issue continues, let us see the further dumps ... if they provide any little more info there.

http://www.sevenforums.com/bsod-help-support/374407-bsod-windows-x64-error-0x00000124-hal-dll-12a3b-ntoskrnl-exe-748c0.html
Relevancy 60.2%

Hi all New to the forum and I'm after some help on the random BSOD I keep getting I occurrence. ntoskrnl.exe+18c453 Random and hal.dll+12a3b BSOD Error have recently updated my motherboard bundle with an i k overclocked to ghz Gigabyte Z -HD Every now and again I get a BSOD and it has happened during gaming and when browsing the net Using BlueScreenView gave me two addresses ntoskrnl exe ntoskrnl exe c fffff fffff dff x e x db a Microsoft Windows Operating System NT Kernel amp System win sp gdr - Microsoft Corporation C Windows system ntoskrnl exe hal dll hal dll a b fffff dff fffff e x x ce c I read on the web a few things Random BSOD occurrence. Error hal.dll+12a3b and ntoskrnl.exe+18c453 to try One was the possibility of it to do with Avast Antivirus so I uninstalled and put on MSE and the other was do with my eSata Random BSOD occurrence. Error hal.dll+12a3b and ntoskrnl.exe+18c453 connection This is just a port from the back of the PC with a SATA cable running and connecting to my mobo The eSata drive isn't always on and it still caused a BSOD Attached are the dump files as requested Anything else please let me know Thanks

A:Random BSOD occurrence. Error hal.dll+12a3b and ntoskrnl.exe+18c453

Code:
BugCheck 124, {0, fffffa8007fb0028, bf800000, 124}

Probably caused by : GenuineIntel

Code:
3: kd> !errrec fffffa8007fb0028
===============================================================================
Common Platform Error Record @ fffffa8007fb0028
-------------------------------------------------------------------------------
Record Id : 01cead73daec61e2
Severity : Fatal (1)
Length : 928
Creator : Microsoft
Notify Type : Machine Check Exception
Timestamp : 9/9/2013 16:26:47 (UTC)
Flags : 0x00000000

===============================================================================
Section 0 : Processor Generic
-------------------------------------------------------------------------------
Descriptor @ fffffa8007fb00a8
Section @ fffffa8007fb0180
Offset : 344
Length : 192
Flags : 0x00000001 Primary
Severity : Fatal

Proc. Type : x86/x64
Instr. Set : x64
Error Type : Cache error
Operation : Generic
Flags : 0x00
Level : 0
CPU Version : 0x00000000000306c3
Processor ID : 0x0000000000000006

===============================================================================
Section 1 : x86/x64 Processor Specific
-------------------------------------------------------------------------------
Descriptor @ fffffa8007fb00f0
Section @ fffffa8007fb0240
Offset : 536
Length : 128
Flags : 0x00000000
Severity : Fatal

Local APIC Id : 0x0000000000000006
CPU Id : c3 06 03 00 00 08 10 06 - bf fb da 7f ff fb eb bf
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00

Proc. Info 0 @ fffffa8007fb0240

===============================================================================
Section 2 : x86/x64 MCA
-------------------------------------------------------------------------------
Descriptor @ fffffa8007fb0138
Section @ fffffa8007fb02c0
Offset : 664
Length : 264
Flags : 0x00000000
Severity : Fatal

Error : DCACHEL0_WR_ERR (Proc 3 Bank 1)
Status : 0xbf80000000000124
Address : 0x000000023e5f5200
Misc. : 0x0000000000000086
There seems to be a problem with writing data to the cache, I would suggest running this test:Hardware - Stress Test With Prime95
Enable "Round off checking" before the test (see first post below tutorial).

Run the Small FFT's, Large FFT's and Blend Test for a few hours each, do not let the temperature exceed 80*C.

http://www.sevenforums.com/bsod-help-support/304261-random-bsod-occurrence-error-hal-dll-12a3b-ntoskrnl-exe-18c453.html
Relevancy 59.77%

I bought my computer last year Custom build Everything was working fine until January th this year I experienced my first BSOD on this machine I've tried rolling back graphics drivers which were the only ones BSOD Sparse Win7-64bit (hal.dll+12a3b, 0x00000124 ntoskrnl.exe+75bc0) I had installed recently and it didn't help because days later the same BSOD happened The next BSOD didn't happen for another month And recently this is my th one that I am attaching in the log compilation The other dmp's were Sparse BSOD 0x00000124 (hal.dll+12a3b, ntoskrnl.exe+75bc0) Win7-64bit erased by me Sparse BSOD 0x00000124 (hal.dll+12a3b, ntoskrnl.exe+75bc0) Win7-64bit by accident but they all said the same thing when I opened them in BlueScreenView I will try reseating hardware and more stress tests when I have time but I'm really lost here as its such a sparse occurrence that it makes it really hard for me to test in a reasonable amount of time I'm hoping someone here can see what my inexperienced eyes are missing Here's what I do know - I didn't install any drivers for a while month or so other than the nvidia driver which I rolled back - I am not overclocking and just running stock and default BIOS Though since my rd BSOD I have turned on XMP for my RAM didn't make anything worse I guess - The BSOD happens very randomly Twice while I was playing fairly low resource demanding games Once while I was just on desktop dragging organizing files And most recently Sparse BSOD 0x00000124 (hal.dll+12a3b, ntoskrnl.exe+75bc0) Win7-64bit while browsing Twitch tv on Chrome There seems to be nothing in common which is really frustrating - It doesn't seem to be related to how long my computer has been running The most recent happened minutes after turning my computer on - I have a minor suspicion it could be my sound because it's always given me issues distorting not being detected randomly at startup But it is onboard and I have no idea how to begin testing it I will post updates as I perform further tests will be running memtest thru the night last time only ran for hours Please let me know any good suggestions Thanks a lot

A:Sparse BSOD 0x00000124 (hal.dll+12a3b, ntoskrnl.exe+75bc0) Win7-64bit

I apologize ahead of time for losing the other 3 memory dumps, though they all appeared the same I'm sure there was useful information in there. I deleted them by accident via diskcleanup utility. I will post memory dmps as they happen in this thread, but for now if anyone sees a potential problem or has any advice to test please let me know.

http://www.sevenforums.com/bsod-help-support/328551-sparse-bsod-0x00000124-hal-dll-12a3b-ntoskrnl-exe-75bc0-win7-64bit.html
Relevancy 59.77%

Hi I just built my computer about a month and a half ago and made sure my hardware was secured tightly and properly onto the mother board I updated all of the drivers youtube any error hal.dll+12a3b playing video BSOD or streams online for the PC to the best of my knowledge due to receiving BSOD in the beginning partly because the drivers were not up to date BSOD playing youtube or any online video streams error hal.dll+12a3b After the driver updates everything is working great from playing games and the usual day to day use of the PC But when I started streaming two windows of online videos from either youtube or any other video site thats when it started to give me the BSOD But it was sporadic and not crashing with every single video playback It would crash on some videos and not on others I did some research and found a software called bluescreenview which captures the BSOD codes and this was what I found hal dll a b I don't understand what this code means because based on my research it could be multiple factors Please help me Thank you - OS Windows bit - OS was full retail - Age of the system is about two months old now - Age of the OS installation is about two months old Other hardware specs CPU Intel i - K GHz Gigs of RAM

A:BSOD playing youtube or any online video streams error hal.dll+12a3b

All of them are the HAL for Windows reporting that your CPU has detected an internal failure. Given the strong consistency for these errors (they're all identical with the same cpu cache bank referenced), I'm afraid your CPU has most likely kicked the bucket.

Before you proceed on anything, if you have your system overclocked in any way, shape or fashion, reset to factory defaults. It's good sense that despite previous success with overclocking, if a system starts getting unstable, the first thing one should blame is the overclocking and reset as a result. Even if it isn't, it can easily be returned to its previous settings.

Anyways, I have sometimes seen software bugs arise that would cause this, and even once I seen a video card cause this problem (how, I have absolutely no clue). First of all, if you have any software that came with your motherboard besides the drivers, uninstall them. I've found they are very buggy as well as gimmicky, and strangely they have usually caused WHEA errors like this, making it appear the hardware is at fault. Second, update your BIOS if you haven't already, as that can potentially cause this. Lastly, run MemtestCL on your video card. Note that since you have an ATI card, you'll need to download and install the ATI APP SDK first, as it requires OpenCL.

Those should cover any potential edge cases that could create these WHEA errors. However, my opinion would be that this is certain hardware (CPU). The causes mentioned previously have the potential to create WHEA errors, but honestly, the specific WHEA error reported here is micro-architectural failure, which is most certainly the CPU's prob.

http://www.sevenforums.com/bsod-help-support/218384-bsod-playing-youtube-any-online-video-streams-error-hal-dll-12a3b.html
Relevancy 52.89%

i am having this problem after i change my video cards i upgraded a 460 SLI to a 680
i have run 3dmark11 to try to replicate the bsod or something and nothing happends
i clean my hardware and change the thermal compound then i played some bf3 and paff the same bsod =(

pd: sorry for my english
i forgot to say that i have the last beta drivers from nvidia because with the WHQL i was having problems in gw2
Attachment 231326

A:BSOD playing bf3, hal.dll hal.dll+12a3b , ntoskrnl.exe ntoskrnl.exe+18

Welcome

For the bug check you're getting go through:
Stop 0x124 - what it means and what to try

Also get a latest version of your BIOS.


Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Yusra\Downloads\Fayer\SF_11-09-2012\091112-23509-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
Machine Name:
Kernel base = 0xfffff800`03667000 PsLoadedModuleList = 0xfffff800`038ab670
Debug session time: Wed Sep 12 06:29:05.072 2012 (UTC + 6:00)
System Uptime: 0 days 7:04:57.025
Loading Kernel Symbols
...............................................................
................................................................
................................
Loading User Symbols
Loading unloaded module list
.....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 124, {0, fffffa80086cf028, ba000000, 400405}

*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : hardware

Followup: MachineOwner
---------

5: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa80086cf028, Address of the WHEA_ERROR_RECORD structure.
Arg3: 00000000ba000000, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000000400405, Low order 32-bits of the MCi_STATUS value.

Debugging Details:
------------------
BUGCHECK_STR: 0x124_GenuineIntel

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

PROCESS_NAME: System

CURRENT_IRQL: f

STACK_TEXT:
fffff880`030acb58 fffff800`03630a3b : 00000000`00000124 00000000`00000000 fffffa80`086cf028 00000000`ba000000 : nt!KeBugCheckEx
fffff880`030acb60 fffff800`037f3b03 : 00000000`00000001 fffffa80`0860b890 00000000`00000000 fffffa80`0860b8e0 : hal!HalBugCheckSystem+0x1e3
fffff880`030acba0 fffff800`03630700 : 00000000`00000728 fffffa80`0860b890 fffff880`030acf30 fffff880`030acf00 : nt!WheaReportHwError+0x263
fffff880`030acc00 fffff800`03630052 : fffffa80`0860b890 fffff880`030acf30 fffffa80`0860b890 00000000`00000000 : hal!HalpMcaReportError+0x4c
fffff880`030acd50 fffff800`0362ff0d : 00000000`00000008 00000000`00000001 fffff880`030acfb0 00000000`00000000 : hal!HalpMceHandler+0x9e
fffff880`030acd90 fffff800`03623e88 : 0000003b`5e9a7a72 fffffa80`0ae15ac8 00000000`00000000 00000000`00000000 : hal!HalpMceHandlerWithRendezvous+0x55
fffff880`030acdc0 fffff800`036e4aac : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : hal!HalHandleMcheck+0x40
fffff880`030acdf0 fffff800`036e4913 : 00000000`00000000 00000... Read more

http://www.sevenforums.com/bsod-help-support/252352-bsod-playing-bf3-hal-dll-hal-dll-12a3b-ntoskrnl-exe-ntoskrnl-exe-18-a.html
Relevancy 48.16%

Dear all,

I just created an account since I am tired. Tired of trying everything
by bworsing this forum I instantly recognized that they are ton of ID EXPERTS(!) here! Amazing!
Thank you already for even reading my post! You rock!

When I play game or use my CPU little heavier, I instantly get the BSOD

Here are the details:
See attachments --> Dumpfile

Please help me

All the best,
Greetings Darius

A:hal.dll+12a3b and ntoskrnl.exe+189bff

Please read Blue Screen of Death (BSOD) Posting Instructions

http://www.sevenforums.com/bsod-help-support/397685-hal-dll-12a3b-ntoskrnl-exe-189bff.html
Relevancy 46.87%

Dear members...

My previous version of win7 kept on going BSOD so i installed a fresh copy. Specifically when using photoshop i continuously keep getting BSOD`s again. It seems photoshop runs fine, when not doing anything on the side..so i think.

I ran a HD test and recovered some bad sectors already. My cpu was bought as a amd xII phenom, but can be unlocked to become a x4.. and in stead of x16 multyplier i set it to 18 and was running stable at the time..

As i had lost the win7 install disk i took the win7 from my drive and i do recall this version being more unstable then the one i used to have on disk..



and here`s my dump file:
Dest Media | error 404

Who can tell me some insights ?

Also my core voltage`s seem to be on the low side..

http://www.sevenforums.com/bsod-help-support/388969-bcc-code-124-hall-dll-12a3b-ntoskernel-dll-18d563.html
Relevancy 46.01%

Random BSODs hal dll a b ntoskrnl exe cb Spex Toshiba Satellite L Laptop Windows Ultimate x SP Fresh install no updates whatsoever Intel Core Duo P hour Prime DONE GB Random hal.dll+12a3b, IRQL, 0x124.. BSODs ntoskrnl.exe+18cb03, RAM GB GB different speeds hour MEMTEST DONE Random BSODs hal.dll+12a3b, ntoskrnl.exe+18cb03, IRQL, 0x124.. ATI Radeon Mobility HD series hour Prime DONE WD Caviar GB HDD Fresh format chkdsk R DONE quot HDD Scan quot DONE Tried reseating RAM HDD DVD Other checks SFC no problems dxdiag shows no issues have turned on VERIFIER EXE and selected all non MS and some MS as Random BSODs hal.dll+12a3b, ntoskrnl.exe+18cb03, IRQL, 0x124.. well drivers to monitor Software Google Chrome No AV or Firewall Windows' Firewall disabled Tried with full drivers installed full Windows Updates Same results Now reformatted with fresh install with no updates whatsoever and no drivers isntalled Same results Tried a different source CD for Win installation Same results Problem Description Random BSODs showing x mostly IRQL x E x A hal dll ntoskrnl Occurs randomly and very frequently Half of the time can't even load into desktop Prime when it runs shows no errors but half of the time when trying to RUN the workers it the program crashes WITHOUT giving a BSOD or a Random BSODs hal.dll+12a3b, ntoskrnl.exe+18cb03, IRQL, 0x124.. freeze etc In my weeks of trying to debug this laptop there have been moments when it runs fine and I was able to play some games notably World of Tanks Pirates of the Burning Seas to test and ran beautifully Please help me solve this issue I truly want to learn how to thanks Attached is the zip files from SF Diags

A:Random BSODs hal.dll+12a3b, ntoskrnl.exe+18cb03, IRQL, 0x124..

oh and to be sure, let me remark that i have done zero overclocking.
tried with just one stick of RAM (both).
unplugged all USB.
unplugged power and ran on purely battery.
thanks.

http://www.sevenforums.com/bsod-help-support/252349-random-bsods-hal-dll-12a3b-ntoskrnl-exe-18cb03-irql-0x124.html
Relevancy 24.08%

The title says it all. Brand new i7 x980. Asus x58 premium. 12GB Mushkin enhanced redline. USB 3.0. SATA 6Gbps. Intel x-25MG2 160GB.
Multiple blue screens. Just this morning (Tuesday morning) it was 4 or 5 of them within about a 40 minute time frame. PC Pitstop driver scan had me update my NIC drivers. No help.
I'm hoping you forensic computer detectives can help figure this one out.
Minidumps are zipped up as are three WER XML files.
Thanks,
Ethan

A:BSOD, BSOD, BSOD (minidump files zipped)

What was the error message that arrived with the BlueScreen? Was it Driver_irql_not_less_or_equal?

http://www.sevenforums.com/bsod-help-support/76694-bsod-bsod-bsod-minidump-files-zipped.html
Relevancy 24.08%

hey i am on a emachine with about 1400gb of ram andbut an old video card, i think realtek 200. But there is a game called Combat Arms (mmfps) game and when i try to load a game it either gives me a blue screen or restarts my computer. This has happened before after a few updates and then im fine then im not. i dont think it the new ram i instaled( 2 ddr 3200 512gb) Its only made the game faster. Whats the problem.
 

Relevancy 24.08%

PSU Corsair W CMPSU- TXEU Case THERMALTAKE ElementS CPU AMD Phenom II X BE HDD SAMSUNG HD HJ SpinPoint BSoD Random boot BSoD, BSoD playing, on while F quot GB GPU ZOTAC Geforce GTX MB DDR Lettore LG Super Multi CH LS RAM CORSAIR Dominator x GB DDR CMP GX M A C Mobo Random BSoD, BSoD while playing, BSoD on boot Asus M A T-M USB OS Windows Ultimate bit I've got this system running since november and i have had not a single problem About a month ago i had issues trying to boot windows i had to turn power on off loads of time until i was able to get to desktop Since that day Blue Screens happened every Random BSoD, BSoD while playing, BSoD on boot time i got to desktop after few seconds or after few minutes Freezes and BSoD kept coming so i ran some tests memtest scandisk a samsung hdd test They showed no errors but memtest Memtest found out loads of errors coming from both RAMs and so i bought new ones Kingstone HyperX KHX C D K I had same problems freeze and errors just after boot not later played some heavy game for more than hours or so I tested old rams on another computer and they worked just fine Oh and i format install Windows about three times I tried to remove GPU and tried to use MOBO GPU but it still freezed Right now i have no freeze BSoD on boot but only while playing after few secs P S I had BSoD using the BsoD collecting application P P S Some things are written in italian because i'm running an italian OS

A:Random BSoD, BSoD while playing, BSoD on boot

Here some Blue Screen coming from Driver Verifier ...
If my Blue Screen View says the truth, they come from MagicIso... Which i have installed, like, today...

http://www.techsupportforum.com/forums/f299/random-bsod-bsod-while-playing-bsod-on-boot-603533.html
Relevancy 21.93%

Just did a malware scan and ended up with bsod. Please check my mini dump and advise on what to try.

Hjalmer

A:Recent crash issues system exception bsod and Page Fault bsod

Tried loading Malware Byte and had BSOD:

On Thu 4/3/2014 2:19:27 PM GMT your computer crashed
crash dump file: C:\Windows\Minidump\040314-17440-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x75BC0)
Bugcheck code: 0x1E (0xFFFFFFFFC0000005, 0xFFFFF800030B7D79, 0x0, 0xFFFFFFFFFFFFFFFF)
Error: KMODE_EXCEPTION_NOT_HANDLED
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft? Windows? Operating System
company: Microsoft Corporation
description: NT Kernel & System

http://www.sevenforums.com/bsod-help-support/327301-recent-crash-issues-system-exception-bsod-page-fault-bsod.html
Relevancy 21.93%

Hello, so i think i have dealt with this bluescreen 3times now, and it seemed to have gone away after i went from my amd system to intel. But now its there again. The most useful function ever, wake from sleep, is now bluescreening my computer. I instantly tried to use the Disply Driver Uninstaller because thats how i solved this before, but no luck... So please, could anyone help me out? I have the dmp file too. (apparantly this support forum does not allow for dmp file uploads.... well..

https://mega.nz/#!4Z4hWIqT!XuoyoNUKM...RvY0RvlTppYago
Hope that works... (now i realise i could have used google drive and escaped the hassle of creating a mega account...)

http://www.tenforums.com/bsod-crashes-debugging/53139-video-internal-scheduler-error-bsod-wake-sleep-bsod-re-appeare.html
Relevancy 21.93%

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 2057

Additional information about the problem:
BCCode: 116
BCP1: FFFFFA8010C69010
BCP2: FFFFF880069CD6AC
BCP3: FFFFFFFFC000009A
BCP4: 0000000000000004
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\040913-9204-01.dmp
C:\Users\Phantom\AppData\Local\Temp\WER-21060-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

==========================================================

changed bios settings from RAID to IDE didnt seem to help this has occurred multiple times during playing planet side 2 the game runs fine then suddenly crashes im pretty sure i have the latest drivers and everything is up to date can someone clever help me please

A:BSOD Plannetside 2 (steam) black screen> reboot> BSOD crash report

A stop 0x116 is a display/graphics related issue. Many a factors or components may cause such a BSOD.

First of all, it is the display driver. From your BSOD dumps, I have noticed that it crashed the same irrespective of the driver version over time. So overlooking this part right now. Will concentrate it on later again, if needed.

Next thing is overclocking, which sometimes lead display to crash. And, you are slightly overclocked.

Code:
CPUID: "Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz"
MaxSpeed: 3400
CurrentSpeed: 3411
As the system is crashing, you should stop overclocking. Set all the hardware elements like CPU, GPU and RAM to default; and reset the BIOS to default too.
How To Clear CMOS (Reset BIOS)

Heat is another factor. Is the computer hot? Report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy.

Also, dust accumulation causes heat, and dust accumulation depends on the age of the system. How old the system is? If possible, dismantle it and clean the inside carefully .... specially the air vents and fan grills, so that it can blow the hot air out easily.
Dont forget to apply thermal paste to the CPU when re-seating the system.

Insufficient power supply is also a great cause of display crash. Check if the CPU is supplying adequate power there or not.
eXtreme Power Supply Calculator

It GPU itself may not perform upto the mark. Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

Let us know the results.
_______________________________________________
BSOD ANALYSIS:

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 116, {fffffa800f27a010, fffff88006bc36ac, ffffffffc000009a, 4}

Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+9336ac )

Followup: MachineOwner
---------

7: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

VIDEO_TDR_FAILURE (116)
Attempt to reset the display driver and recover from timeout failed.
Arguments:
Arg1: fffffa800f27a010, Optional pointer to internal TDR recovery context (TDR_RECOVERY_CONTEXT).
Arg2: fffff88006bc36ac, The pointer into responsible device driver module (e.g. owner tag).
Arg3: ffffffffc000009a, Optional error code (NTSTATUS) of the last failed operation.
Arg4: 0000000000000004, Optional internal context dependent data.

Debugging Details:
------------------
FAULTING_IP:
nvlddmkm+9336ac
fffff880`06bc36ac 4055 push rbp

DEFAULT_BUCKET_ID: GRAPHICS_DRIVER_TDR_FAULT

CUSTOMER_CRASH_COUNT: 1

BUGCHECK_STR: 0x116

PROCESS_NAME: System

CURRENT_IRQL: 0

STACK_TEXT:
fffff880`02f8ea48 fffff880`0568e000 : 00000000`00000116 fffffa80`0f27a010 fffff880`06bc36ac ffffffff`c000009a : nt!KeBugCheckEx
fffff880`02f8ea50 fffff880`05661867 : fffff880`06bc36ac fffffa80`0b386000 00000000`00000000 ffffffff`c000009a : dxgkrnl!TdrBugcheckOnTimeout+0xec
fffff880`02f8ea90 fffff880`0568de0f : fffffa80`ffffd84d 00000000`00000000 fffffa80`0f27a010 000000... Read more

http://www.sevenforums.com/bsod-help-support/285754-bsod-plannetside-2-steam-black-screen-reboot-bsod-crash-report.html
Relevancy 21.93%

Hello Guys and Gals my Windows Laptop is in a serious pickle and I have used every bit of troubleshooting knowledge I have learned in my years working in a Windows environment to no result I hope that I am posting in the correct forum and BSOD wont error:0xc0000010 boot Win desktop mode, BSOD, 7 even safe in I have read the forum rules This is my first post on any help forum ever so I hope the way I have written this is in conformance with what you all are used to I have seen BSOD, Win 7 desktop wont boot even in safe mode, BSOD error:0xc0000010 multiple error codes thrown when I forced the computer not to restart and show me the BSOD details This is what is stated Stop x F x xFFFFFA c xFFFFFA CBF xFFFFF B B Summary My laptop boots to the Windows login screen but after logging in startup never finishes completely and is completely unresponsive to Ctrl Shift Esc and any other attempts to pull up the task manager My laptop is dual boot and has these OS's installed Windows Home Premium Genuine and Kali Linux both of which are bit versions When I attempt to boot the BSOD, Win 7 desktop wont boot even in safe mode, BSOD error:0xc0000010 computer into the Windows environment I am able to login at the normal account login page but after this it will take an entire day's time to load the desktop and even when it does finally show the task bar then the icons I am unable to open any of them For instance after about minutes when the taskbar finally appears when I click on the start button whether from the keyboard windows icon or the mouse I will have to wait about minutes until the start button opens its normal window Even when it does I get no response from the system when I attempt to click on any program folder or file I have tried to reboot the computer in safe mode with and without networking support and the computer responds in the same exact fashion never completely loading and even after hours when the icons finally appear I cannot open any folders windows or programs and if I attempt to do so the system will freeze and stay like that until I force BSOD, Win 7 desktop wont boot even in safe mode, BSOD error:0xc0000010 the computer to shutdown manually I am able to boot into safe mode with command prompt seamlessly though and I have tried the normal resolution steps from this command prompt such as chkdsk and sfcscan now which sometimes completes and shows orphaned files and sometimes doesnt complete I have reached out to Microsoft support and the technician suggest I make a Live USB of Hitman Pro with kickstart and I did I ran this tool on bootup and kickstart found about different types of malware and I disinfected quarantined them as it permitted me I rebooted to the same exact issue and upon running the Hitman Pro Live USB again it found no other infection This seemed shady to me so I went ahead and created a Kaspersky Rescue Disk Live CD through my Kali Linux partition which is working perfectly and shows no signs of any damage After running Kaspersky it found approximately types of malware trojans backdoors etc I quickly quarantined disinfected these as per the advice from the Kaspersky program The catch is none of this has fixed the load time responsiveness of my windows environment in the slightest I know there is no memory problem as I have already ran the memory tests from my BIOS and also I dont believe my hard drive is failing because my Linux partition works flawlessly and without a hiccup I am truly exhausted from days of scratching my head at this and throwing everything at it but the kitchen sink Tools Used so far Kaspersky Rescue Disk Live CD Hitman Pro with Kickstart Live USB Chkdsk Sfcscan now Windows recovery partition startup repair reports that there is nothing wrong Windows Restore point My first troubleshoot was to load the only available restore point which did not fix anything Advanced boot options Last known good configuration Safe mode Safe mode with networking Both of which behave in the same exact fa... Read more

A:BSOD, Win 7 desktop wont boot even in safe mode, BSOD error:0xc0000010

  
Quote: Originally Posted by wlocas


Stop 0x000000F4 (0x0000000000000003, 0xFFFFFA800600c910, 0xFFFFFA800600CBF0, 0xFFFFF8000357B7B0


Havent read the rest. Coz those are not relevant.

Let us know about your storage system. Namely ....
HDD or SSD
How many
Make and model (if possible)
Storage controller mode (SATA/IDE/AHCI/SCSI/RAID)
Storage controller driver
Let us know. Those information (as many of them as possible) will help us to start troubleshooting.

http://www.sevenforums.com/bsod-help-support/317481-bsod-win-7-desktop-wont-boot-even-safe-mode-bsod-error-0xc0000010.html
Relevancy 21.93%

Hi everyone After restarting the computer following a malwarebytes scan I could not get into window nor safe mode and BSOD restarting malwarebytes after repair xp a BSOD running following windows scan after and system restore by pressing F at start up What I only had after running a little while is BSOD Btw I ran diagnostic test a few times All passed After this happened and I did some searching online I decided to run a windows xp repair by using the original OEM window xp installation CD sp when the system inside the computer is sp after I updated it long ago I followed the processes suggested by the following BSOD after restarting following a malwarebytes scan and BSOD after running windows xp repair webpage http BSOD after restarting following a malwarebytes scan and BSOD after running windows xp repair www windowsreinstall com winxphome sp sp installxpcdrepair indexfullpage htm It was all fine until Part in that webpage A BSOD popped out after the windows symbol in Part And I BSOD after restarting following a malwarebytes scan and BSOD after running windows xp repair noticed some new sentences at the bottom of the BSOD which are like physical memory dump Hopefully solutions for all of this would be recommended by someone I don t even really dare to switch the computer back on now Sorry if I have posted in the wrong section of the forum If I have done it please move this post to the right section Thank you in advance

A:BSOD after restarting following a malwarebytes scan and BSOD after running windows xp repair

System manufacturer and model?

Generally...OEM disks do not allow for a "repair install", only a reversion to factory defaults which the system had when purchased.

All documentation (which I've seen) referring to a repair install of XP...assume that the user has a copy of MS Genuine Windows, not disks provided by an OEM.

Louis

http://www.bleepingcomputer.com/forums/t/461881/bsod-after-restarting-following-a-malwarebytes-scan-and-bsod-after-running-windows-xp-repair/
Relevancy 21.93%

Hello So first of all I am not a computer wizard Some terms I might not understand as i've never had a problem like this before but i'll try to enlist as much information as possible Since last friday or so i've suddenly encountered a BSOD Now i've had them before and it was only once After a reboot it usually never happend again and everything was cool But since friday they popped up again Mainly during playing Battlefield but i've also had it happen during Dragon Ball Xenoverse I've had multiple BSOD errors which are - IRQL NOT LESS OR EQUAL - BAD POOL HEADER - MEMORY MANAGEMENT - SYSTEM SERVICE EXCEPTION - APC INDEX MISMATCH Now if it were one I might've been able to pinpoint the issue but They're constantly different errors that happen Now to explain a bit more in detail how it goes So i'm just playing a match of Battlefield After minutes give or take it'll bring me to the multiple inside listed BSOD so playing games, far errors, BSOD 5 blue screen After processing whatever it has to process computer shuts down and it starts to restart At this point it will be stuck in an infinite restart loop where my monitor will not display anything as well It just says it's not connected to something which it clearly is After manually closing and rebooting i'll have to do this a few times or mess with the HDMI a little bit before I get my monitor to pop up again Once that happens I get stuck in the beginning screen where you can see your HDD SSD installed It won't go further than that unless I hit F There have been times where I had to go into BIOS and revert it to default settings as well even though I never change a thing in there but it worked Then it reboots back up as usual Very rarely i'll get an instant BSOD when it logged in but that only happens rarely Now the solutions i've been trying - Deleted graphics drivers all of them and reinstalled them Did not work - BSOD playing games, so far 5 multiple BSOD errors, listed inside Out of frustration reinstalled Windows Did not fix anything - Brought him in to a shop The BSOD's never appeared there and seemingly there's nothing wrong within the system according to him - Went BSOD playing games, so far 5 multiple BSOD errors, listed inside to my parents house to test there since I do not have a car Played games there no BSOD I BSOD playing games, so far 5 multiple BSOD errors, listed inside got the hope that maybe it was fixed but then I returned home tried it out and after or so minutes of playing Battlefield BSOD This time it gave me the IRQL NOT LESS OR EQUAL amp BAD POOL HEADER errors I've even been paranoid enough to think that it might be external hardware that is causing it Like my headset or speakers or SOMETHING that was different when I brought it to the shop or when I was home at my parents house Is that even possible It's good to know that i've had my current video card since release of the GTX and it never caused any sort of problem before Here are two dump errors I cannot show the others as they occured before I reinstalled Win so I do not have those dump files anymore but here are two of the most recent ones In case system specs are needed System Spec Computer type PC Desktop OS Windows x CPU Intel Core i GHz Motherboard Alienware JNH CPU Memory GB DDR MHz Graphics Card s MB NVIDIA GeForce GTX MSI I'm pretty desperate at this moment so any help would be greatly appreciated Thanks for the read

http://www.tenforums.com/bsod-crashes-debugging/69330-bsod-playing-games-so-far-5-multiple-bsod-errors-listed-inside.html
Relevancy 21.93%

Hello After doing a lot of forum surfing I have yet to find anything that's worked to get rid of this error My goal is to get the 7 Page_Fault_In_Nonpaged_Area BSOD] from [moved Vista/ BSOD Windows Stop:0x00000050 data off of my drive the problem I am not running XP Pro not sure what sp at one point but I might have uninstalled it on a dell poweredge sc Bios recognizes my hard drive which is a SATA gb No way to run as a slave with an ATA so I've BSOD Stop:0x00000050 Page_Fault_In_Nonpaged_Area [moved from Vista/ Windows 7 BSOD] read I am getting a BSOD x when BSOD Stop:0x00000050 Page_Fault_In_Nonpaged_Area [moved from Vista/ Windows 7 BSOD] booting normally It flashes for just a quick moment after a few seconds BSOD Stop:0x00000050 Page_Fault_In_Nonpaged_Area [moved from Vista/ Windows 7 BSOD] of the XP logo then computer restarts Computer restarts without showing a BSOD when I try to boot in safe mode Computer shows BSOD when plugged into the usb port using a external case my other ATA hard drive runs windows just fine on this computer Same thing happens when plugged into a different computer Computer shows these errors when I try to use recovery console from my XP CD x D x E x D I think it's shown the x before It's been different almost every time I let the CD load today but one time it was in OS install mode cause I thought that might help I can't seem to get this thing to work Before this happened my computer was acting really slow dragging a window around or making selection box on the desktop would make things all skippy and send the cpu to the upper s with nothing else running The BSOD started when I tried to run the SATA as a slave to my ATA Am I going to have to send my drive in and pay money for my valuable data Thank you so much for reading and for any help you could give me -Mike

A:BSOD Stop:0x00000050 Page_Fault_In_Nonpaged_Area [moved from Vista/ Windows 7 BSOD]

0x50 = invalid memory referenced
0xd0 = kernel attempted to access invalid memory
0xe3 = thread tried to release a resource it did not own
0xd1 = kernel-mode driver attempted to access invalid memory

Test RAM - Run memtest86+ - http://www.techsupportforum.com/2863029-post5.html

Regards. . .

jcgriff2

`

http://www.techsupportforum.com/forums/f10/bsod-stop-0x00000050-page_fault_in_nonpaged_area-moved-from-vista-windows-7-bsod-561249.html
Relevancy 21.93%

Hello I am experiencing some random BSODs It happens no matter what program is running It could be in a game surfing the internet or listening to music It is very random Happens about attached) system BSOD... health & dump Help report Random (BSOD please once every two days on average Some days are worse I have Random BSOD... Help please (BSOD dump & system health report attached) tried running driver verifier but Random BSOD... Help please (BSOD dump & system health report attached) it would Random BSOD... Help please (BSOD dump & system health report attached) still only bsod occasionally except it would bsod on startup instead of being in the desktop and getting a bsod I have also ran memtest x a few times and found no errors My windows is -x bit Professional Edition -Original OS installed on my system I built the system -Full retail -Built my system over the summer Been getting occassional BSODs ever since -OS installation is about months old And if this helps My system parts are -Intel i -EVGA P LE motherboard using onboard audio as well -EVGA gtx -Adata G-Series DDR mhz ram x gb -some low-end hitachi gb hard drive -Thermaltake Toughpower XT watt Yes I have installed all the latest drivers from all the manufaturers' websites I have also attached a BSOD dump and system health report Please and thank you for your help

A:Random BSOD... Help please (BSOD dump & system health report attached)

Welcome to SF.

Like you indicated, you have the latest video driver.

However, your network and wireless network drivers need updating.

Marvell Yukon:
Driver c:\windows\system32\drivers\yk62x64.sys (11.10.6.3, 384.00 KB (393,216 bytes), 6/15/2009 2:10 AM)

D-Link Adapter:
Driver c:\windows\system32\drivers\athrx.sys (8.0.0.238, 1.47 MB (1,542,656 bytes), 10/5/2009 4:34 PM)






Quote:
Followup: memory_corruption
---------

4: kd> !analyze -v;r;kv;lmtn;lmtsmn
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: 0000000000000024, memory referenced
Arg2: 000000000000000d, IRQL
Arg3: 0000000000000001, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff8000348856f, address which referenced memory


Most likely driver-related.

Still, run memtest86+ and let it go through at least six passes.

Finally, uninstall McAfee or Norton and replace it with MSE.

http://www.sevenforums.com/bsod-help-support/131875-random-bsod-help-please-bsod-dump-system-health-report-attached.html
Relevancy 21.93%

I recently built a new system When playing Bad Company I have gotten a consistent BSOD about hour into playing I am not really familiar with BSOD codes and my computer restarted so quickly I was unable to get the exact code When I play again I will try to get the code and add it to the post One thing I noticed when using the Forums System 2, during unknown Bad BSOD BSOD attached jcgriff2 files error, Company Specs is that it showed the Intel HD Graphics from BSOD during Bad Company 2, unknown error, jcgriff2 BSOD files attached the processor being the primary graphics with a current resolution of x x while my Radeon was the secondary graphics with a current resolution of x x I was under the impression that the Intel Graphics should automatically be disabled with the install of my Is it possible that the Intel graphics aren't being disabled properly and being overloaded when I play Like I said I'm not too familiar with debugging and any help would be appreciated This is my first time posting please let me know if there is BSOD during Bad Company 2, unknown error, jcgriff2 BSOD files attached any additional information that is needed and how I can gather it Thanks

A:BSOD during Bad Company 2, unknown error, jcgriff2 BSOD files attached

Sorry I forgot to add the System Health Report. Here it is.

http://www.sevenforums.com/bsod-help-support/193534-bsod-during-bad-company-2-unknown-error-jcgriff2-bsod-files-attached.html
Relevancy 21.93%

Around the th of March I was playing Smite, BCC116 atikmpag.sys & playing BSOD mentions BCC117, BSOD Smite joined a match and about half way through it I received a freeze then a BSOD This continued to happen randomly when I would play a smite match ranging from every to matches could happen near the beginning or in the middle of the game So I wouldn't ruin more games for others I attempted to fix the problem myself looking up that I had to update my GPU drivers which I do now have or uninstall them to let my pc auto install the suitable one This ended up with my PC or Radeon hardware detector not detecting the GPU so I had to system restore I also tried cleaning out my PC rig BSOD playing Smite, BCC116 & BCC117, BSOD mentions atikmpag.sys with a duster to see if my bad PC hygiene had caused heating problems but it had no affect I have used malware-bytes to detect malware and viruses but all that was quarantined seems to have had no affect I tried these solutions that I see everywhere when I search but obviously they didn't work So instead of finding a solution I attempted to find more symptoms I found that within the blue screen it mentions atikmpag sys I see that my PC problem reports tell me that I have a lot of Windows shutting down and Video hardware errors With the BCC codes BCC and BCC respectivly I also attempted to see if I would gain the BSOD by testing on more strenuous games and didn't gain any BSOD whilst playing Dark Souls and Batman Arkham Knight thus so far I have concluded that this BSOD seems Smite specific though this could do with some further testing So now I have given up in attempting to fix it by my self and have joined the Sevenforums in an attempt to fix this problem and get back to the game I enjoy I hope I have successfully attached the zip file correctly but if I haven't or some other files are needed or if I haven't applied a forum rule by accident please mention it To test whether a solution has worked or not I will have to play many smite matches so it may take a while before whether I can reply confirm whether the BSODs are gone or not

http://www.sevenforums.com/bsod-help-support/394049-bsod-playing-smite-bcc116-bcc117-bsod-mentions-atikmpag-sys.html
Relevancy 21.93%

Hi,

My computer has been unstable for quite some time and after memory tests, changing graphics cards, many driver variations and a couple of fresh OS installs a while ago it is still not stable.

The difficulty is that it doesn't seem to be triggered by anything specific so it makes debugging really difficult... sometimes it crashes twice a day then not for another week or two.

Please help me shed some light on how this could be resolved as I am considering stripping the PC down to its components, selling them and buying a pre-built system instead.

Thanks
Henry

A:BSOD randomly (no specific trigger) Commonly an IRQL issue on BSOD

Welcome aboard.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 109, {a3a039d89ab61a11, b3b7465eed34644b, fffffa8005567960, 8}

Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )

Followup: MachineOwner
---------
According to carrona.org, STOP 0x00000109: CRITICAL_STRUCTURE_CORRUPTION
Usual causes: Device driver, Breakpoint set with no debugger attached, Hardware (Memory in particular)

Let us search for a faulting driver first.
Driver Verifier - Enable and Disable

Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

Let us know the results, with the subsequent crash dumps, if any.

http://www.sevenforums.com/bsod-help-support/259503-bsod-randomly-no-specific-trigger-commonly-irql-issue-bsod.html
Relevancy 21.93%

After BSOD problems (0x00000050), I took my two month old Dell desktop back to Geek Squad under warranty. Said problem wasn't hardware, but software, and would charge to fix. I took it home and reinstalled Win 7. BSOD (0x0000007b) with a Dell installation CD, but otherwise fine except it keeps restarting itself at various intervals. When I tried installing drivers, it wouldn't recognize Ethernet card. Not sure what's going on. Wife thinks a no-name anti-virus CD will fix it all, but I'd appreciate your advice.
Attachment 229276

A:BSOD reboot, still BSOD problems & failure to recognize Ethernet card

Zip file uploaded to post above. Thanks.

http://www.sevenforums.com/bsod-help-support/250196-bsod-reboot-still-bsod-problems-failure-recognize-ethernet-card.html
Relevancy 21.93%

Hello You guys have been great before and I hope that someone can help me tackle this My friend s computer started going weird after playing a game that uses Shockwave That s the last thing they remember When loading into Windows regular mode after selecting any user all you see on the screen is black with blue spots all over They re using an Asus P DV -VM SE motherboard Intel E GHz CPU GB DDR with a w PSU Originally I thought it was video-driver related as they re Random 0x8e 0xa3 Bsod Picture Bsod Unusual/unclear And - And using the onboard graphics card It s a Via P M -based motherboard although it has a PCIe expansion Loading in safe mode usually works and loading into VGA mode got me into Windows however I received a x E pretty quickly At some point I also received a xA I tried uninstalling the video driver Via Chrome That allowed me back into regular mode but soon after I got a BSOD I tried running System Restore from safemode and I got xA ACPI DRIVER INTERNAL but I can t find info on fixing this one Thanks in advance Ram

A:Bsod 0xa3 And 0x8e - Unusual/unclear Picture And Random Bsod

0x8e errors are usually caused by driver issues. Here is what Microsoft says regarding 0xa3 errors:An inconsistency in the ACPI driver is so severe that continuing to run would cause serious problems. One possible source of this problem is a BIOS error.Drivers and Windows interacts with the BIOS. Have you tried a BIOS update? Usually this is not recommended as it can cause serious issues if the update is not performed correctly, but is recommended when the BIOS is suspected to be the cause of an issue such as this.EDIT: all you see on the screen is black with blue spots all over.I just remembered having an issue like this, and it was corrected by simply reseating the video card. Just thought I would mention this.

http://www.bleepingcomputer.com/forums/t/155431/bsod-0xa3-and-0x8e-unusualunclear-picture-and-random-bsod/
Relevancy 21.93%

This normally happens when I first start using the computer for the day. Sometimes when it happens there is a sound to it when it freezes but not always. Once the computer is going good for around 15-20mins then it no longer happens until the next reboot.

A:BSOD Screen freezes with red/blue/yellow horizontal lines then BSOD

Hi There,

Your video driver seems to be the problem,


Code:
BugCheck 1000007E, {ffffffffc0000005, fffff8800424f152, fffff880021b69e8, fffff880021b6240}

Probably caused by : atipmdag.sys ( atipmdag+39a152 )

Followup: MachineOwner
It is pretty old,


Code:
Loaded symbol image file: atipmdag.sys
Image path: \SystemRoot\system32\DRIVERS\atipmdag.sys
Image name: atipmdag.sys
Timestamp: Mon Mar 29 05:26:02 2010 (4BB09C5A)
CheckSum: 0062931D
ImageSize: 0066F000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
There doesn't seem to be an update from Gateway either.

Let's try uninstalling that driver and let windows install a WHQL driver,

How-To Uninstall AMD Catalyst Drivers From A Windows Based System

After uninstalling from programs and features,

1. Go to Device Manager and expand Display Adapters.

2. Right click on your adapter and choose properties.

3. Select the Driver tab and choose uninstall.

4. When finished, reboot the computer and let Windows install the available WHQL driver.

http://www.sevenforums.com/bsod-help-support/334785-bsod-screen-freezes-red-blue-yellow-horizontal-lines-then-bsod.html
Relevancy 21.93%

Hey guys!

I was browsing Facebook and exactly when I wanted to play a video I got this BSOD:

(It stuck on Initializing disk for crash dump so I force restarted the computer if this is for any help)

Could you help me find out why I got it and how to avoid it in the future?

Thank's

A:BSOD while browsing Facebook, STOP: 0x00000101; Image of BSOD attached

Hello LukaLean and welcome to the Forums,

Please follow the BSOD Posting Instructions and provide us with the .zip file created.
Good luck and keep us posted,
Nommy

http://www.sevenforums.com/bsod-help-support/304625-bsod-while-browsing-facebook-stop-0x00000101-image-bsod-attached.html
Relevancy 21.93%

I have a relatively new computer that I've built and I've been getting BSOD's for a while.

At first I thought it was because the pagefile was disabled, but that was just why they weren't getting logged to MiniDump. Then I got it enabled again and now I'm getting a lot of BSODs. It's been 0x3b ntoskrnl exe lately, but when I enabled driver verifier I was getting a different BSOD on each boot.

One of them specifically mentioned a .sys that I can't exactly remember. it was XXhalp.sys or something, and when I Googled it - everyone was talking about deleting monitor profiles from the registry and that somehow old monitor profiles were causing the BSODs, so I donno about that.

I would appreciate any help you can offer. I'll be actively monitoring this (and I'm currently in safe mode with driver verifier still enabled). So just let me know what you need.

Thanks,

Pseudo

A:BSOD Fairly Often. Driver Verifier Enabled = BSOD on Boot Every Time

Is there anything I can do to get someone to take a look at this?

http://www.sevenforums.com/bsod-help-support/358185-bsod-fairly-often-driver-verifier-enabled-bsod-boot-every-time.html
Relevancy 21.93%

I have been getting a ton of bsods I have re installed video drivers, updated and reinstalled windows 8. Did countless hardware test(Video ram, check memory, Cpu test) all passed temperatures stay around 25-35 c.
Recently uninstalled all video drivers and re installed. The bsods sometimes go away for a week or two but come back. and sometimes when it bsods there is a static noise inside of the computer, and the blue screen becomes distorted
Ive attached the dump files, if someone could help me pinpoint the piece of hardware so I can ship it out for repair please.

A:Random BSOD 0x00000124 Hall.dll (Bsod is distorted/static sound)

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 124, {0, ffffe00154472028, bf800000, 124}

Probably caused by : GenuineIntel

Followup: MachineOwner
---------
I know you said you've run hardware tests, but in our experience you have to run specific tests according to a specific regime. Run all of these and report back.

RAM - run a minimum of 8 consecutive passes, no less
RAM - Test with Memtest86+

CPU - run the STANDARD test only
CPU - Stress Test Using IntelBurnTest

Video - run for 20 mins
Video Card - Stress Test with Furmark

Storage - run the SHORT test only using the DOS version
SeaTools for DOS and Windows - How to Use

http://www.sevenforums.com/bsod-help-support/356563-random-bsod-0x00000124-hall-dll-bsod-distorted-static-sound.html
Relevancy 21.93%

Windows 7 came installed on system
system about 7 years old
AMD Phenom II X4 820 processor 2.80GHz
Nvidia Geforce 9100
motherboard: pegatron m2n7b-la
power supply: liteon 300w
HP Pavilion AY748AA-ABA p6320y
Desktop

Any help is much appreciated and thanks jcgriff2 for BSOD posting instructions

A:BSOD 0x000003b ran BSOD File Collection app + perfmon (attached zip files)

Hi,

All of the attached DMP files are of the SYSTEM_SERVICE_EXCEPTION (3b)bug check.

This indicates that an exception happened while executing a routine that transitions from non-privileged code to privileged code.

This error has been linked to excessive paged pool usage and may occur due to user-mode graphics drivers crossing over and passing bad data to the kernel code.

BugCheck 3B, {c0000005, fffff8000324b1a4, fffff88009790f30, 0}


Code:

1: kd> ln fffff8000324b1a4
(fffff800`0324b190) nt!MiUnmapLockedPagesInUserSpace+0x14 | (fffff800`0324b4f0) nt!KeUnInitializeUmsThread
The exception occurred in nt!MiUnmapLockedPagesInUserSpace+0x14. This is an API that maps a buffer into the dynamic address range.

--------------------------

1.

-- PROCESS_NAME: nvstreamsvc.ex

Uninstall/disable nVidia Streaming Kernel service ASAP!

2. Uninstall Spyhunter ASAP from Enigma Software as it's likely causing conflicts with Malwarebytes.

3. Ensure you have the latest video card drivers. If you are already on the latest video card drivers, uninstall and install a version or a few versions behind the latest to ensure it's not a latest driver only issue. If you have already experimented with the latest video card driver and many previous versions, please give the beta driver for your card a try.

4. sptd.sys is listed and loaded in your modules list; SCSI Pass Through Direct Host - Daemon Tools (known BSOD issues with Win 7 and 8). Please remove it ASAP with the uninstaller tool - DuplexSecure - Downloads

Regards,

Patrick

http://www.techsupportforum.com/forums/f299/bsod-0x000003b-ran-bsod-file-collection-app-perfmon-attached-zip-files-851802.html
Relevancy 21.93%

Hi Guys I am new to the forum My Pc started crashing recently after my Codes while gaming time) surfing vary Random each web(BSOD and BSOD's old PSU w busted and i replaced it w The funny part about the bsod's is i get different codes each time eg d then a then b etc Random BSOD's while gaming and surfing web(BSOD Codes vary each time) at first i thought it was maybe a virus so I formatted The PC and then installed the latest drivers i could find for my PC The results were only slightly different from the past The computer would stay up a little longer before it crashed I ran a memtest and RAM is fine Then I thought it was my GPU overheating So i cleaned the fans of both GPU and processor and Replaced the Old Thermal Compound Still no improvement and here I am Now My Specs - Motherboard - Asustek Random BSOD's while gaming and surfing web(BSOD Codes vary each time) P Q Se CPU - Intel Core Quad Q Yorkfield Socket - LGA GPU - Nvidia GTX GB ZOTAC RAM - x GB DDR HDD -Seagate Barracuda gb

A:Random BSOD's while gaming and surfing web(BSOD Codes vary each time)

Code:
Host Name: TKMOHAMMED-PC
OS Name: Microsoft Windows 7 Ultimate
OS Version: 6.1.7600 N/A Build 7600
OS Manufacturer: Microsoft Corporation
OS Configuration: Standalone Workstation
OS Build Type: Multiprocessor Free
Registered Owner: TK Mohammed
Registered Organization:
Product ID: 00426-OEM-8992662-00497
Original Install Date: 4/17/2015, 1:19:57 AM
System Boot Time: 4/20/2015, 12:59:14 PM
System Manufacturer: System manufacturer
System Model: P5Q SE
Counterfeit installations such as yours contains heavily modified code that causes the installation to behave it unexpected ways. Analysing BSOD's and determining their causes on these sorts of installations is very unreliable.

My recommendation is to start with a clean slate, and install a genuine version of Windows. This will minimise the problems you are experiencing, and make subsequent diagnosis of BSOD's far more reliable.

http://www.sevenforums.com/bsod-help-support/367650-random-bsods-while-gaming-surfing-web-bsod-codes-vary-each-time.html
Relevancy 21.93%

Is Windows 7 Professional 64bit

Fresh install but it is getting on
Full retail version?

Acer Aspire timeline X 5280tg Approx 18 months old.
OS age approx 12 months.

I get the BUGCODE_USB_DRIVER bsod and I had a previous blue screen error before this one is in dump files.

Tried memory tester and came up ok.

Help would be much appreciated.

A:BSOD Tribes Ascend, BF3, Random BSOD BUGCODE_USB_DRIVER Acer Laptop

Code:
sptd.sys Sun Oct 11 16:55:14 2009 (4AD24632)
Remove Daemon Tools/Alcohol 120%. The driver associated with it (SPTD) causes BSOD and it caused one of yours - DuplexSecure



Code:
athrx.sys Mon Oct 05 12:33:57 2009 (4ACA1FF5)
Update your Atheros driver. It caused a crash - Drivers for Atheros AR5B93 and Windows 7


Code:
atikmpag.sys Mon Jun 13 21:23:20 2011 (4DF6B808)
Update your video card - ATI Catalyst

Problem Devices

Code:
Device PNP_Device_ID Error_Code
Teredo Tunneling Pseudo-Interface ROOT\*TEREDO\0000 This device cannot start.
Microsoft 6to4 Adapter ROOT\*6TO4MP\0000 This device cannot start.
Microsoft 6to4 Adapter #2 ROOT\*6TO4MP\0001 This device cannot start.
Microsoft ISATAP Adapter ROOT\*ISATAP\0000 This device cannot start.
Microsoft ISATAP Adapter #3 ROOT\*ISATAP\0001 This device cannot start.

Code:
Event[4142]:
Log Name: System
Source: Disk
Date: 2012-02-19T21:45:23.424
Event ID: 52
Task: N/A
Level: Warning
Opcode: N/A
Keyword: Classic
User: N/A
User Name: N/A
Computer: LAPPY
Description:
The driver has detected that device \Device\Harddisk0\DR0 has predicted that it will fail. Immediately back up your data and replace your hard disk drive. A failure may be imminent.
Run a hard drive scan on all your drives. Also, I would back up any important information just in case your hard drive does fail
Hard drive scan usings SeaTools - SeaTools for Windows | Seagate - Both long and short tests


BSOD BUGCHECK SUMMARY

Code:

Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Fri Feb 24 06:53:20.004 2012 (UTC - 5:00)
System Uptime: 0 days 0:01:20.580
Probably caused by : Pool_Corruption ( nt!ExDeferredFreePool+a53 )
BUGCHECK_STR: 0x19_3
PROCESS_NAME: AvastSvc.exe
FAILURE_BUCKET_ID: X64_0x19_3_nt!ExDeferredFreePool+a53
BiosReleaseDate = 03/16/2011
SystemManufacturer = Acer
SystemProductName = Aspire 5820TG
CPUID: "Intel(R) Core(TM) i5 CPU M 520 @ 2.40GHz"
MaxSpeed: 2400
CurrentSpeed: 2394
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Wed Feb 22 09:43:27.448 2012 (UTC - 5:00)
System Uptime: 0 days 0:00:53.008
Probably caused by : Pool_Corruption ( nt!ExDeferredFreePool+100 )
PROCESS_NAME: System
ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
BUGCHECK_STR: 0x34
FAILURE_BUCKET_ID: X64_0x34_nt!ExDeferredFreePool+100
BiosReleaseDate = 03/16/2011
SystemManufacturer = Acer
SystemProductName = Aspire 5820TG
CPUID: "Intel(R) Core(TM) i5 CPU M 520 @ 2.40GHz"
MaxSpeed: 2400
CurrentSpeed: 2394
??????????????????????????????????????????????????????????????????????????????????????``
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Wed Feb 22 02:09:59.641 2012 (UTC - 5:00)
System Uptime: 0 days 0:12:03.827
Probably caused by : dxgmms1.sys ( dxgmms1!VIDMM_GLOBAL::ReferenceAllocationForPreparation+22 )
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
PROCESS_NAME: System
ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
BUGCHECK_STR: 0x7E
FAILURE_BUCKET_ID: X64_0x7E_dxgmms1!VIDMM_GLOBAL::ReferenceAllocationForPreparation+22
BiosReleaseDate = 03/16/2011
SystemManufacturer = Acer
SystemProductName = Aspire 5820TG
CPUID: "Intel(R) Core(TM) i5 CPU M 520 @ 2.40GHz"
MaxSpeed: 2400
CurrentSpeed: 2394
????????????????... Read more

http://www.sevenforums.com/bsod-help-support/216092-bsod-tribes-ascend-bf3-random-bsod-bugcode_usb_driver-acer-laptop.html
Relevancy 21.93%

Hi All,
 
I'm an experience computer user working in technical support and system administration in linux environment. 
 
This issue has me stumped.
 
My pc is refusing to boot, it will throw a BSOD moments after hitting the loading windows screen.
 
Start up recovery prompts to system restore, once this is complete it restarts with the same effect.
 
 
Repairing from the windows system disk has the same effect.
 
When booting into safe mode, the system will BSOD when loading aswRvrt.sys.
 
All BSODs happen too fast to read anything, not dumping physical memory.
 
This all started happening after a seemingly random BSOD which happened last night.
 
The only change to the system that I effected was installing a newsgroup reader this was done several hours before the first BSOD.
 
Any assistance would be greatly appreciated. 

A:BSOD on windows load - safe mode BSOD at loading Aswrvrt.sys

When you used the installation disc did you access the System Recovery Options and run the Startup Repair?

http://www.bleepingcomputer.com/forums/t/576992/bsod-on-windows-load-safe-mode-bsod-at-loading-aswrvrtsys/
Relevancy 21.93%

This has been extremely frustrating for BSOD safe causing in GMER 7 BSOD ataport.sys mode Windows me I come home from working and my cousin tells me my computer keeps going blue and restarting So now my computer will only run in safe mode I have spybot Kaspersky won t run in safe mode AVS none of them seem to do the trick From what I can tell it seems to be the win virus every time I get rid of it it seems to come back I would get rid of it then my computer would be fine now it won t run in normal at all This is the message I get on blue screen no images sorry STOp x E xc x C xC F DC x ataport sys - address base BSOD Windows 7 ataport.sys GMER causing BSOD in safe mode at date BSOD Windows 7 ataport.sys GMER causing BSOD in safe mode stamp a b f My dvd drive does not BSOD Windows 7 ataport.sys GMER causing BSOD in safe mode work so reformatting at this time is not an option Only thing I could think of is reformat using a thumb drive but all I have is a gb and I dont have the money to go out and buy a new one So now im fresh out of ideas Is there anyway I can fix this without going out and buying a new dvd drive usb Also im running windows ultimate and I get blue screen of death when running GMER in the middle of scanning so i cant upload a log from it I can tell theres a rootkit installed atleast two because before it crashes it shows two on the hardisk along with other minor ones DDS Ver - - - NTFSx NETWORK Internet Explorer BrowserJavaVersion Run by at on - - Running Processes Pseudo HJT Report mDefault Page URL hxxp www yahoo com mStart Page about blank BHO amp Yahoo Toolbar Helper d -c f - efb- b - eca - c program files yahoo companion installs cpn yt dll BHO HP Print Enhancer c e- - -bf - c - c program files hp digital imaging smart web printing hpswp printenhancer dll BHO BA E- EC- DE-B A -E D - No File BHO Adobe PDF Link Helper df c-e ad- -a -fa c ebdc - c program files common files adobe acrobat activex AcroIEHelperShim dll BHO Spybot-S amp D IE Protection - f - d - - d f - c progra spybot SDHelper dll BHO IEVkbdBHO Class ab -e d - f -a a - fa cca c - c program files kaspersky lab kaspersky internet security ievkbd dll BHO C C A-E - b - D - CECB - No File BHO RoboForm BHO d a - d - d - - e a - c program files siber systems ai roboform roboform dll BHO Groove GFS Browser Helper - c - d -b f - bbc d a e - c progra mif ba office GROOVEEX DLL BHO BF -DF - f-B DA- D FC E E - No File BHO Windows Live ID Sign-in Helper d - c - abf- ecc- c - c program files common files microsoft shared windows live WindowsLiveLogin dll BHO D -D - -BAB -AB A - No File BHO Office Document Cache Handler b f a - e - -ba - b e ff - c progra mif ba office URLREDIR DLL BHO Java tm Plug-In SSV Helper dbc -a - b-bc - c c c a - c program files java jre bin jp ssv dll BHO FilterBHO Class e cf -d - a- f - f a f - c program files kaspersky lab kaspersky internet security klwtbbho dll BHO SingleInstance Class fdad da - a - fd - c - f ac - c program files yahoo companion installs cpn YTSingleInstance dll BHO HP Smart BHO Class ffffffff-cf e- f b-bdc - e e a - c program files hp digital imaging smart web printing hpswp BHO dll TB Yahoo Toolbar ef bd -c fb- d - f- d f - c program files yahoo companion installs cpn yt dll TB amp RoboForm d a - d - d - - e a - c program files siber systems ai roboform roboform dll TB D -D - -BAB -AB A - No File EB HP Smart Web Printing d d - bd - -a -cfc a - c program files hp digital imaging smart web printing hpswp bho dll uRun RoboForm quot c program files siber systems ai roboform RoboTaskBarIcon exe quot uRun msnmsgr quot c program files windows live messenger msnmsgr exe quot background uRun AnyDVD quot c program files slysoft anydvd AnyDVD exe quot uRun Advanced SystemCare c program files iobit advanced systemcare ASCTray exe mRun Adobe Reader Speed Launcher quot c program files adobe reader reader Reader sl exe quot mRun Adobe ARM quot c program files common files adobe arm AdobeARM exe quot mRun HP Software Update c pr... Read more

https://forums.techguy.org/threads/bsod-windows-7-ataport-sys-gmer-causing-bsod-in-safe-mode.1000724/
Relevancy 21.93%

Hi all really getting a headache trying to fix my mums laptop out but I am struggling miserably BSOD's whilst also reinst Windows [SOLVED] trying while - BSOD's now Vista bootup, to I have no idea what she has done obviously claiming to have done nothing but basically I got [SOLVED] Windows Vista - BSOD's while trying to bootup, now also BSOD's whilst reinst a text this morning asking me to take a look at the [SOLVED] Windows Vista - BSOD's while trying to bootup, now also BSOD's whilst reinst laptop because it wont turn on First thing is the Windows bootup screen improper shutdown asking to boot in [SOLVED] Windows Vista - BSOD's while trying to bootup, now also BSOD's whilst reinst safemode normal etc I chose normal and just as it was about to boot into Windows a fast BSOD appeared for a split second and then the laptop restarted to the same screen This time I chose Last known configuration same happened The BSOD's were so fast I cannot get a glance at it I tried in safe mode and it seemed fine but I didnt know what I should try to do So I did a system restore and this worked ok but again it wouldnt boot up After hours of trying I googled some and downloaded Windows Vista Recovery Disc and I attempted the Automatic System Repair but it told me failed to detect any problems Tried it again and same So then I attempted to boot it back up but nope BSOD again The laptop did come with a typical recovery disc but I am unable to find that and the Windows Vista label is stuck underneath the Laptop so I downloaded a copy of Windows Vista to install and I managed to format the harddrive Now this is what bugs me I cannot even install a fresh copy of Windows I am actually trying again as we speak but even whilst quot Copying the files quot on the Windows installation it BSOD's on that too Like I said I was unable to even get a glance at the BSOD messages whilst windows was installed on those boot up failures however the BSOD messages whilst trying to install Windows are very readable as they do not disappear The first one I recall mentioning NTFS or NTSF dot sys ntfs sys The second one I only recall the top line which was MEMORY MANAGEMENT And the third one which I was just about to write in detail as it was still on my screen has just disappeared It was again a totally different message though Im very confused and it makes it worse because Ive built several PCs so I know the insides of those quite well and also have plenty of spare parts but not for laptops I have never even seen inside of a laptop before and certainly have no spare parts to test out Anyone able to help me out with this I feel The laptop is a Packard Bell SJ

A:[SOLVED] Windows Vista - BSOD's while trying to bootup, now also BSOD's whilst reinst

Memory_Management

STOP: 0x000000001A (0x00041284. 0xA4884001....




I just tried again for 4th time and I managed to type this much above ^^ before the laptop restarted itself :(

http://www.techsupportforum.com/forums/f299/solved-windows-vista-bsods-while-trying-to-bootup-now-also-bsods-whilst-reinst-515393.html
Relevancy 21.93%

bit full retail Hardware is month old built myself OS was installed when I built it from a USB drive did not include an optical drive in the build SPECS i k ATI GPU corsair tx PSU ASRock Extreme Gen motherboard Corsair vengance ddr ram x gb Coolermaster hyper cooling unit gb Western Digital HD gb Crucial M ssd OS is installed on this drive It was working fine the first weeks I had the build then I went on a vacation for a week I come back and the thing BSODs on me times in an hour and a half First thing I tried was setting clocks back to normal was at ghz on the i BSOD Self included) built computer. (BSOD semi-randomly. dump.zip went back down to ghz and it was stable for like BSOD semi-randomly. Self built computer. (BSOD dump.zip included) minutes after I did that but it then crashed again Also did a memory diagnostic test BSOD semi-randomly. Self built computer. (BSOD dump.zip included) and everything was supposedly good My max temps with prime now are like degrees celsius with RealTemp because I have the coolermaster hyper as opposed to the stock cooler so it shouldnt be crashing due to over heating Also first crash occured firing up minecraft Thanks for any and all help guys

A:BSOD semi-randomly. Self built computer. (BSOD dump.zip included)

Quote:
Also did a memory diagnostic test and everything was supposedly good.


Using which tool/software? You should run Memtes86+ for at least 7 Passes (Test each RAM stick individually)
RAM - Test with Memtest86+
Your BSODs are RAM/Memory related, rest your RAM settings to their default values in your BIOS. Stop any overclocking if any.

Run Prime 95 to test your CPU. Carefully the instructions in this tutorial: CPU - Stress Test with Prime95. Run 3 separate tests, one on each of the settings (Blend, Small FFTs, Large FFTs). Post back with your results.
Note that this test may overheat the CPU, ensure proper cooling.

Post back with your results.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

CACHE_MANAGER (34)
See the comment for FAT_FILE_SYSTEM (0x23)
Arguments:
Arg1: 0000000000050853
Arg2: fffff88018cbc7a8
Arg3: fffff88018cbc000
Arg4: fffff80001ede67c

Debugging Details:
------------------
EXCEPTION_RECORD: fffff88018cbc7a8 -- (.exr 0xfffff88018cbc7a8)
ExceptionAddress: fffff80001ede67c (nt!CcLazyWriteScan+0x0000000000000188)
ExceptionCode: c0000005 (Access violation)
ExceptionFlags: 00000000
NumberParameters: 2
Parameter[0]: 0000000000000000
Parameter[1]: ffffffffffffffff
Attempt to read from address ffffffffffffffff

CONTEXT: fffff88018cbc000 -- (.cxr 0xfffff88018cbc000)
rax=0000000000240000 rbx=0000000000000000 rcx=fffff80002097940
rdx=0000000000000000 rsi=ffff6a8009de4390 rdi=0000000000000000
rip=fffff80001ede67c rsp=fffff88018cbc9e0 rbp=fffff80002036280
r8=fffff88001e5e840 r9=0000000000000000 r10=fffffa800790be30
r11=0000000000000002 r12=0000000000000001 r13=0000000000000000
r14=fffffa8009e313b0 r15=ffff6a8009de4418
iopl=0 nv up ei ng nz na pe nc
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010282
nt!CcLazyWriteScan+0x188:
fffff800`01ede67c 488b4e60 mov rcx,qword ptr [rsi+60h] ds:002b:ffff6a80`09de43f0=????????????????
Resetting default scope

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

PROCESS_NAME: System

CURRENT_IRQL: 2

ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

EXCEPTION_PARAMETER1: 0000000000000000

EXCEPTION_PARAMETER2: ffffffffffffffff

READ_ADDRESS: GetPointerFromAddress: unable to read from fffff800020c8100
ffffffffffffffff

FOLLOWUP_IP:
nt!CcLazyWriteScan+188
fffff800`01ede67c 488b4e60 mov rcx,qword ptr [rsi+60h]

FAULTING_IP:
nt!CcLazyWriteScan+188
fffff800`01ede67c 488b4e60 mov rcx,qword ptr [rsi+60h]

BUGCHECK_STR: 0x34

LAST_CONTROL_TRANSFER: from fffff80001ede189 to fffff80001ede67c

STACK_TEXT:
fffff880`18cbc9e0 fffff800`01ede189 : fffff880`000000c5 fffffa80`00000000 00000000`00000000 ffff6a80`09de4390 : nt!CcLazyWriteScan+0x188
fffff880`18cbcac0 fffff800`01ea2841 : fffffa80`07909570 fffff800`0218b601 fffff800`020978c0 00000000`00000002 : nt!CcWorkerThread+0x1f9
fffff880`18cbcb70 fffff800`0212fe6a : 00000000`00000000 fffffa80`09813b50 00000000`00000080 fffffa80`078ea040 : nt!ExpWorkerThread+0x111
fffff880`18cbcc00 fffff800`01e89ec6 : fffff880`01ed0180 fffffa80`09813b50 fffffa80`078f9b50 00000000`00000202 : nt!PspSystemThreadStartup+0x5a
fffff880`18cbcc40 00000000`00000000 : fffff880`18cbd000 fffff880`18cb7000 fffff880`18cbc8a0 00000000`00000000 : nt!KxStartSystemThread+0x16
SYMBOL_STACK_INDEX: 0

SYMBOL_NAME: nt!CcLazyWriteScan+188

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: nt

IMAGE_NAME: ntkrnlmp.e... Read more

http://www.sevenforums.com/bsod-help-support/237942-bsod-semi-randomly-self-built-computer-bsod-dump-zip-included.html
Relevancy 21.93%

Hello A very strange and quite permanent problem with using Windows Live Messenger has occured recently When I log on I can use it like normal for minutes or so then the whole computer starts freezing up While Alt-Tab command still works Then the mouse input is disabled Then I get a BSOD The first two times the computer started acting weird however I got BSOD, [moved Windows or Live 0x7A BSOD from Crashes] Problem recurring Messenger 0x77 a remote procedure call as opposed to a BSOD I Windows Live Messenger recurring BSOD 0x77 or 0x7A Problem [moved from BSOD, Crashes] have been able to use Windows Live Messenger recurring BSOD 0x77 or 0x7A Problem [moved from BSOD, Crashes] Windows Live Messenger for a long time until recently Less than a week ago when I got a BSOD usually calling x Kernel Stack Inpage Error or a x A At one instance An example of a full BSOD code with parameters is x A xE E E xC B xBF C B x with the x A BSOD the affected file was win k sys at address BF C B with base at BF datestamped F f Today I also got a BSOD logging into hotmail The computer otherwise works as normal as long as I do not remain online for too long in hotmail or when refraining from using the Live Messenger client I have uninstalled and reinstalled Live Messenger in case that would have been the problem I also reinstalled Firefox to its latest version The problem persists still I have searched for viruses with the latest definitions and I have updated Spybot S amp D likewise and searched for spy- and malware The computer is apparently clean I have run CHKDSK with the F-flag enabled on startup and no sectors were damaged I have tried looking for Messenger USN-sharing service in the services msc and cannot find it Everything seems to be quite normal Furthermore I can use Ebuddy perfectly as a substitute But it's not at all normal So I did a HijackThis-search and here's the log Code Logfile of Trend Micro HijackThis v Scan saved at on - - Platform Windows XP SP WinNT MSIE Internet Explorer v Boot mode Normal Running processes C WINDOWS System smss exe C WINDOWS system winlogon exe C WINDOWS system services exe C WINDOWS system lsass exe C WINDOWS system svchost exe C WINDOWS System svchost exe C Program Alwil Software Avast AvastSvc exe C WINDOWS system spoolsv exe C Program Creative Shared Files CTAudSvc exe C WINDOWS Explorer EXE C Program TortoiseSVN bin TSVNCache exe C Program Delade filer EPSON EBAPI eEBSVC exe C Program Bonjour mDNSResponder exe C WINDOWS system CTsvcCDA EXE C Program Delade filer EPSON EBAPI SAgent exe C Program Intel Intel Matrix Storage Manager iaantmon exe C Program Java jre bin jqs exe C Program Delade filer Java Java Update jusched exe C Program Intel Intel Matrix Storage Manager iaanotif exe C Program Creative SBAudigy ZS Surround Mixer CTSysVol exe C Program Creative SBAudigy ZS DVDAudio CTDVDDET EXE C WINDOWS system mysqlcc exe C Program CyberLink PowerDVD DVDLauncher exe C Program Dell Media Experience DMXLauncher exe C Program Delade filer InstallShield UpdateService issch exe C Program D-Tools daemon exe C WINDOWS system dla tfswctrl exe C WINDOWS system RUNDLL EXE C WINDOWS system CTHELPER EXE C WINDOWS system svchost exe C Program ALWILS Avast avastUI exe C Program ekort ekort exe C WINDOWS system ctfmon exe C Program Canon CAL CALMAIN exe C WINDOWS system OBroker exe C Program Delade filer Ahead Lib NMBgMonitor exe C download Bitlord Downloads Xpadder exe C WINDOWS system wscntfy exe C Program Delade filer Ahead Lib NMIndexingService exe C Program Delade filer Ahead Lib NMIndexStoreSvr exe C Program Mozilla Firefox firefox exe C Program Mozilla Firefox plugin-container exe C Program Adobe Reader Reader AcroRd exe C Program Adobe Reader Reader AcroRd exe C download Bitlord Downloads HijackThis exe R - HKCU Software Microsoft Internet Explorer Main Default Page URL Dell - The Official Site Dell UK R - HKCU Software Microsoft Internet Explorer Main Start Page about blank R - HKLM Software Microsoft Internet E... Read more

A:Windows Live Messenger recurring BSOD 0x77 or 0x7A Problem [moved from BSOD, Crashes]

Quote:





Originally Posted by dppp


I have been able to use Windows Live Messenger for a long time, until recently (Less than a week ago) when I got a BSOD usually calling 0x00000077 (Kernel_Stack_Inpage_Error) or a 0x0000007A (At one instance).

... the 0x7A BSOD ... win32k.sys at address BF929C0B with base at BF8000000, datestamped 45F013f6.




Bugchecks 0x77 & 0x7a are very similar = kernel data from the paging file could not be read into memory.

win32k.sys timestamp 0x45f013f6 = Thu Mar 08 08:47:34 2007

Install all outstanding Windows Updates, including XP SP3.

www.update.microsoft.com

Regards. . .

jcgriff2

`

http://www.techsupportforum.com/forums/f10/windows-live-messenger-recurring-bsod-0x77-or-0x7a-problem-moved-from-bsod-crashes-556612.html
Relevancy 21.93%

Hi Windows kinship My first post here nothing to feel happy about as the post is because of a dreaded thing called BSOD Whats happening My laptop with windows ultimate edition with crashes with bsod x e This happens only when im connected to the internet laptop stays on the internet for some while and then suddenly goes to the screen of death Since When and how I helped a friend due 0x8e drivers virus? or bsod corrupt BSOD to ....suspected send an photo attachment from his Pen drive about days ago I have strong feel that my laptop picked the virus from the pen drive as my laptop was perfect yea even with Windows BSOD bsod 0x8e ....suspected due to corrupt drivers or virus? prior to that Post that I have downloaded Norton -- gt run BSOD bsod 0x8e ....suspected due to corrupt drivers or virus? complete scans-- gt removed all possible viruses some of them keep on reappearing with strange file names those filenames have no mention on the internet and are exes however norton is doing well to quaratine and delete them some googling revealed that this BSOD is related to driver related issues however I have not played around much with the system drivers was in the process of downloading latest video drivers when BOOM BSOD again Im attaching a few Dump files from the last few crashes hoping the superiors can analyze help me fix it In the last days I did not connect the system to the internet at all and the system crashes just once however today I tried to work after connecting to a network and it has crashed times already ANY HELP IS HELP HERE Cheers

A:BSOD bsod 0x8e ....suspected due to corrupt drivers or virus?

Follow these instructions
http://www.sevenforums.com/crashes-d...tructions.html

http://www.sevenforums.com/bsod-help-support/133868-bsod-bsod-0x8e-suspected-due-corrupt-drivers-virus.html
Relevancy 21.93%

Fixing husbands PC and got him to take a pic of BSOD Has crashed within minutes of opening Firefox Facebook since Wx Update on May He says AVG also updated almost simultaneously His FB account was hacked at this time and BSOD Firefox/Facebook crashes on 52514-31824-01.dmp BSOD he changed his password after I ran CC BSOD 52514-31824-01.dmp BSOD crashes on Firefox/Facebook Cleaner AVG Scan Earlier in May the power supply of this box died because the fan seized New power supply and fan installed about May th and computer ran OK until May BSOD 52514-31824-01.dmp BSOD crashes on Firefox/Facebook I updated all the drivers with OS device manager HD Graphics was out of date and updated All others claimed to be up to date In addition to the SF Diagnostic tool file collected as per your instructions I've also included the OS error message details that Microsoft's error reporting is not accepting quot at this time quot At first I guessed it was a bug in the Windows Update of but my other Wx machine is running just fine with the exact same updates so I'm stumped Any help would be greatly appreciated

A:BSOD 52514-31824-01.dmp BSOD crashes on Firefox/Facebook

You are getting 0x9F BSODs, which means a driver is in an inconsistent power state.


Code:
BugCheck 9F, {3, fffffa8005bc4060, fffff80000b9c518, fffffa8003e5cc10}

Probably caused by : usbhub.sys
The code marked in green represents the blocked IRP which we'll come to in a minute, the "probably caused by" shows a USB device is causing issues

These are mostly caused by graphics drivers and it appears yours is out of date.
Update it here.


Code:
0: kd> lmvm igdkmd64
start end module name
fffff880`0480a000 fffff880`053c7d60 igdkmd64 (deferred)
Image path: \SystemRoot\system32\DRIVERS\igdkmd64.sys
Image name: igdkmd64.sys
Timestamp: Tue Jan 10 22:28:09 2012 (4F0CBB79)
CheckSum: 00BC541D
ImageSize: 00BBDD60
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Now to the IRP, I have noticed your M Audio Fast Track Ultra driver is causing issue.


Code:
Unable to load image \SystemRoot\system32\DRIVERS\MAudioFastTrackUltra.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for MAudioFastTrackUltra.sys
*** ERROR: Module load completed but symbols could not be loaded for MAudioFastTrackUltra.sys
\Driver\MAUSBFASTTRACKULTRA
And to patch things up I believe it's a USB device.
I found this in your dxdiag file:


Code:
Description: Output (4- M-Audio Fast Track Ultra)
Default Sound Playback: Yes
Default Voice Playback: No
Hardware ID: USB\VID_0763&PID_2080&REV_0151
Manufacturer ID: 239
Product ID: 65535
Type: WDM
Driver Name: MAudioFastTrackUltra.sys
Driver Version: 5.10.0000.5099 (English)
Driver Attributes: Final Retail
WHQL Logo'd: n/a
Date and Size: 9/25/2009 09:14:58, 195592 bytes
Other Files:
Driver Provider: M-Audio
HW Accel Level: Basic
Cap Flags: 0xF1F
Min/Max Sample Rate: 100, 200000
Static/Strm HW Mix Bufs: 1, 0
Static/Strm HW 3D Bufs: 0, 0
HW Memory: 0
Voice Management: No
EAX(tm) 2.0 Listen/Src: No, No
I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
You can update the driver here but if you don't use it then I recommend uninstalling it and removing the device completely.


Code:
0: kd> lmvm MAudioFastTrackUltra
start end module name
fffff880`05d1e000 fffff880`05d51000 MAudioFastTrackUltra T (no symbols)
Loaded symbol image file: MAudioFastTrackUltra.sys
Image path: \SystemRoot\system32\DRIVERS\MAudioFastTrackUltra.sys
Image name: MAudioFastTrackUltra.sys
Timestamp: Fri Sep 25 17:13:30 2009 (4ABCEC2A)
CheckSum: 00035A60
ImageSize: 00033000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Post back how everything goes on

http://www.sevenforums.com/bsod-help-support/332612-bsod-52514-31824-01-dmp-bsod-crashes-firefox-facebook.html
Relevancy 21.93%

Hi Guys,

Upgraded the parts to my computer around the 20th of December, and been having issues since, i have tried diagnosing the problem myself, re-installed my OS about 10 times now with different installation methods.

I am having so many issues it would be crazy trying to list them all, i will upload the files that the tool created and if you need any further information i will do my best to answer.

I upgraded my RAM, Mobo and CPU in the upgrade.

Please see attached.

A:BSOD - Playing WoW, Borderlands, H1Z1 - Multiple BSOD Errors

is it against the rules to post on your own thread or something? my last 2 messages have been removed from my post :S.

Can anyone help at all on this? been having this trouble for a while now.

http://www.sevenforums.com/bsod-help-support/360045-bsod-playing-wow-borderlands-h1z1-multiple-bsod-errors.html
Relevancy 21.93%

I have been having the BSOD's, during some Daily (Prime95 gaming random, Insta-BSOD) some worst time with my custom built PC Daily BSOD's, some random, some during gaming (Prime95 Insta-BSOD) since it was built I am getting random BSOD's here and there but there does seem to be Daily BSOD's, some random, some during gaming (Prime95 Insta-BSOD) a correlation between a greater occurence when playing games Often I can't play a high-resolution game for more than an hour or two before I crash I heard Daily BSOD's, some random, some during gaming (Prime95 Insta-BSOD) a recommendation to try Prime and I get an insta-BSOD when doing the Blend test I haved tested the memory and did not see any problems Here is the dump report Any help possible would be greatly greatly appreciated I unfortunately am under the suspicion that this is a CPU hardware error and the CPU will have to be replaced but I do need some form of help or confirmation before I take the next step RMA'ing it Sys Info Intel i gb OCZ DDR RAM ATI Radeon HD Asus P T Deluxe V Win Hardware is about years old OS Installation is less than a year old Microsoft R Windows Debugger Version AMD Copyright c Microsoft Corporation All rights reserved Loading Dump File C Windows Minidump - - dmp Mini Kernel Dump File Only registers and stack trace are available Symbol search path is SRV DownstreamStore http msdl microsoft com download symbols Executable search path is Windows Kernel Version Service Pack MP procs Free x Product WinNt suite TerminalServer SingleUserTS Built by amd fre win sp gdr - Machine Name Kernel base xfffff c PsLoadedModuleList xfffff e Debug session time Fri Nov UTC - System Uptime days Loading Kernel Symbols Loading User Symbols Loading unloaded module list Bugcheck Analysis Use analyze -v to get detailed debugging information BugCheck fffffa fa fe a Probably caused by hardware Followup MachineOwner --------- kd gt analyze -v Bugcheck Analysis WHEA UNCORRECTABLE ERROR A fatal hardware error has occurred Parameter identifies the type of error source that reported the error Parameter holds the address of the WHEA ERROR RECORD structure that describes the error conditon Arguments Arg Machine Check Exception Arg fffffa fa Address of the WHEA ERROR RECORD structure Arg fe High order -bits of the MCi STATUS value Arg a Low order -bits of the MCi STATUS value Debugging Details ------------------ BUGCHECK STR x GenuineIntel CUSTOMER CRASH COUNT DEFAULT BUCKET ID VISTA DRIVER FAULT PROCESS NAME System CURRENT IRQL f STACK TEXT fffff ddb fffff c ca b fffffa fa fe nt KeBugCheckEx fffff ddb fffff de fffffa dcba fffffa dcba hal HalBugCheckSystem x e fffff ddba fffff c c fffffa dcba fffff ddf fffff ddf nt WheaReportHwError x fffff ddc fffff c c fffffa dcba fffff ddf fffffa dcba hal HalpMcaReportError x c fffff ddd fffff c bf d fffff ddfb hal HalpMceHandler x e fffff ddd fffff c fe fffffa ebdf hal HalpMceHandlerWithRendezvous x fffff dddc fffff cce c hal HalHandleMcheck x fffff dddf fffff cce nt KxMcheckAbort x c fffff ddf fffff c nt KiMcheckAbort x fffff fd a USBPORT USBPORT NeoValidDeviceHandle x c STACK COMMAND kb FOLLOWUP NAME MachineOwner MODULE NAME hardware IMAGE NAME hardware DEBUG FLR IMAGE TIMESTAMP FAILURE BUCKET ID X x GenuineIntel PROCESSOR CACHE BUCKET ID X x GenuineIntel PROCESSOR CACHE Followup MachineOwner ---------

A:Daily BSOD's, some random, some during gaming (Prime95 Insta-BSOD)

Here are the missing JCGriff2 and perfmon files. Again, any help in regards to this problem I am having are tremendously appreciated. I can fix near anything with a computer, debugging this deep however escapes my knowledge and I don't know who else to turn to.

Note there are four dumps from today. 2 were while playing Skyrim. 2 were while testing Prime95 on Blend mode, insta-crashed within seconds.

http://www.sevenforums.com/bsod-help-support/198049-daily-bsods-some-random-some-during-gaming-prime95-insta-bsod.html
Relevancy 21.93%

I get a BSOD only when gaming Heroes of Newerth which really only uses a small portion of my computers power other games I while gaming Verifier BSOD Driver - makes BSOD hidclass.sys have not noticed any issues although I dont game other games BSOD while gaming - Driver Verifier makes BSOD hidclass.sys much Movies and general computering does not cause any BSOD I did a Driver Verifier BSOD came up hidclass sys BSOD while gaming - Driver Verifier makes BSOD hidclass.sys saved BSOD while gaming - Driver Verifier makes BSOD hidclass.sys Arghh I had to do a system restore when I came back to windows and it deleted the mini dump I've attached a old ones and will re-do driver verifier if requested I did a windows ram test and HDD test for C and no issues noticed I'm new to this whole process but tried to figure it out on my own first any help is much appreciated Windows - bit Windows was the original OS Pre-Installed System is years old same as OS CPU - AMD Phenom II X Black Edition Deneb GHz Video Card - XFX HD- A-ZWFC Radeon HD GB -bit GDDR PCI Express x MotherBoard - ASUS M A XTD EVO AM AMD X ATX AMD Motherboard Power Supply - brand amp wattage - OSZ watt Model OCZ MXSP System Manufacturer - My self Exact model number if laptop check label on bottom

A:BSOD while gaming - Driver Verifier makes BSOD hidclass.sys

I've tried to set up a Driver Verifier mini dump but when I activate it it makes a bluescreen when I come back. I follow the instructions to then go back to my system restore point but when I do it then removes the dump file. My assumption is that now I want for another natural BSOD and then upload that dump? Or should I redo the Driver Verifier and in safe mode upload the dump files?

http://www.techsupportforum.com/forums/f299/bsod-while-gaming-driver-verifier-makes-bsod-hidclass-sys-586452.html
Relevancy 21.93%

My or while error BSOD 0x0000003b - playing idle BSOD music getting a lot computer has BSOD - getting BSOD error 0x0000003b a lot while idle or playing music been doing this a lot recently and its started doing it more often usually the x b code pops up when either windows media player is on or when it is stood idle for a while Using NirSoft's bluescreen viewer it stating that the ntoskrnl exe is the problem in all minidumps it also sometimes states nvator sys is the other file that causes the bluescreen i have attached the minidumps to this and hopefully someone will tell me how to fix it i have checked online and gathered it down to these options either my PSU is not powerful enough to support the payload my HDD BSOD - getting BSOD error 0x0000003b a lot while idle or playing music is corrupt or the RAM is stating to fail Thank you BSOD - getting BSOD error 0x0000003b a lot while idle or playing music for the people who can help as a side note i have tried formatting and reinstalling my windows bit ultimate but the BSOD can appear on setup and did at one point so i had to renew the whole setup recently it has started doing it a lot more one happened not too long ago and also had the CDD dll file as an error Also before anyone says it YES MY DRIVERS ARE ALL UP TO DATE there are literally no updates available for my hardware which is why i think its either my HDD or RAM My Specs AMD Athlon II X Dualcore Gigabyte M LT-D GB x GB DDR RAM not sure on the manufacturer NVIDIA Geforce GT GB Partitioned Western Digital Sata II HDD

A:BSOD - getting BSOD error 0x0000003b a lot while idle or playing music

UPDATE: this just happened to me aswell... states the NTFS.sys is now the error (Error code 0x00000024) was literally only thumbing through facebook nothing else.

http://www.sevenforums.com/bsod-help-support/251960-bsod-getting-bsod-error-0x0000003b-lot-while-idle-playing-music.html
Relevancy 21.93%

I'm trying to fix my friends Inspiron that has the BSOD. He's been getting it since November and did not know what it was so he just ignored it and kept rebooting it until the message happened to not show up. You can go into Safe Mode perfectly fine with no BSOD. Unfortunately I have no idea what to do. I can't do a system restore back to November. I can't figure out which driver it is and I know it's not one you need since Safe Mode is fine. Unfortunately Windows 7 doesn't give you the yellow marker next to drivers anymore. Anyhelp would be appreciated; especially since this is my first time and I hope I did everything right. If I did anything wrong forgive me. Thanks guys!

The error message is 0x0000001e (0xFFFFFFFFC0000096, 0XFFFFF80002EA75CA, 0X0000000000000000, 0X0000000000000000)

A:BSOD after logging in normally. NO BSOD in safe mode. Error 0x0000001e

Post it following the Blue Screen of Death (BSOD) Posting Instructions.

http://www.sevenforums.com/bsod-help-support/294775-bsod-after-logging-normally-no-bsod-safe-mode-error-0x0000001e.html
Relevancy 21.93%

Hi I use a year old aces aspire z and I think it just died on me Here is what happens Whatever I do it cannot stay without a BSOD for more than minutes I tried reinstalling drivers and it did not change anything so I tried several things but finally just formated it and installed windows again I actually got a BSOD while installing windows from an original CD so im pretty sure my problem is hardware related I did a check of the ram with Memtest for approx minutes one full cycle and found nothing I did a quick test of the HD with an other program and it did not find anything either so im starting to think its the graphics card that is dying The minidumps there quite a lot of them but I think they will always give the same Clean - Still BSOD install lots of windows - BSOD Format, same info and health report are attached to the thread Here are some specs Core Duo T Mobile Intel GM Express x MB Thanks in advance for helping me confirm the source of lots of BSOD - Format, Clean windows install - Still same BSOD this problem

A:lots of BSOD - Format, Clean windows install - Still same BSOD

Any help would be greatly appreciated, I really dont know what to do!

http://www.sevenforums.com/bsod-help-support/206684-lots-bsod-format-clean-windows-install-still-same-bsod.html
Relevancy 21.93%

Hello there,

I've been having BSOD since around 2/14/16. They have different codes and the most recent one was today error 0x000000d1. I've noticed that it seems to happen when I wake up my computer from sleep. My CPU was overclocked when this started and as of 2/19/16 I've reset it to default speed. My sister recommended this forum to me.

Thank you very much!

Lucia

Edit: I was looking through my images on my phone and I sent my sister a screenshot on 2/19 of a BAD_POOL_HEADER BSOD STOP: 0x00000019. We uninstalled my HP printer driver which was the newest driver at the time, uninstalled my NVIDIA video driver, downloaded windows essentials and scanned the comp (clean), uninstalled malwarebytes, reset CPU speed and installed the newest NVIDIA driver. I reinstalled malwarebytes as well and ran a scan (clean). Didn't have any issues until today.

A:BSOD when waking comp from sleep, multiple BSOD errors

Hello Milkpop and welcome to 7forums!

So you aren't overclocking right now?

The most recent BSODs were caused by cmudaxp.sys which is an ASUS audio driver, manually update or reinstall the audio drivers. You may need to uninstall, reboot, and perform a fresh audio driver install.You can download the new drivers from here:
https://www.asus.com/Motherboards/RA...Desk_Download/

Cheers, Boris

http://www.sevenforums.com/bsod-help-support/392144-bsod-when-waking-comp-sleep-multiple-bsod-errors.html
Relevancy 21.93%

hii
i have a problem
my laptop (lenovo z710 ) goes blue memoty dump and an error
BSOD error 0x0000016

please help me :-)

A:Blue Screen of Death (BSOD) BSOD error 0x0000016

Hi hemzki.

A stop 0x116 is a display/graphics related issue. For a laptop a stop 0x116 is either a GPU failure or a display driver failure.

Your computer is a laptop with a 700 series nvidia GPU. It seems to be a new one.

Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

If it problems during furmark, RMA the laptop.

But if it is not, then it is a driver issue.

And unfortunately I dont know any driver version that works good with GTX 700 series. You may try the drivers on a trial and error basis:
320.49 WHQL
327.23 WHQL
331.58 WHWL
331.65 WHQL
331.82 WHQL
332.21 WHQL
Any other driver version after that.
Get them from Drivers - Download NVIDIA Drivers

Do a clean install on all of them. Uninstall the previously installed driver first.
Uninstall All nvidia items in Control Panel > Programs and features3D Vision Control Driver
3D Vision Driver
Graphics Driver
HD Audio Driver
PhysX
nvidia Update
GeForce Experience
(Are you using nvidia chipset drivers? If so, dont uninstall anything other than those are listed).
Now follow Drivers - Clean Left over Files after Uninstalling
Download the target WHQL. While installing, Select Custom (Advanced) install. In the next page, follow this settings:
Lengthy process, but the only stable version of nvidia is 314.22 lately, which does not support 700 series GPU.

Hope one of the drivers will work good for you.
______________________________________

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 116, {fffffa8007ac84e0, fffff8800513c15c, ffffffffc000009a, 4}

Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+8f415c )

Followup: MachineOwner
---------

7: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

VIDEO_TDR_FAILURE (116)
Attempt to reset the display driver and recover from timeout failed.
Arguments:
Arg1: fffffa8007ac84e0, Optional pointer to internal TDR recovery context (TDR_RECOVERY_CONTEXT).
Arg2: fffff8800513c15c, The pointer into responsible device driver module (e.g. owner tag).
Arg3: ffffffffc000009a, Optional error code (NTSTATUS) of the last failed operation.
Arg4: 0000000000000004, Optional internal context dependent data.

Debugging Details:
------------------
FAULTING_IP:
nvlddmkm+8f415c
fffff880`0513c15c 803d560af0ff00 cmp byte ptr [nvlddmkm+0x7f4bb9 (fffff880`0503cbb9)],0

DEFAULT_BUCKET_ID: GRAPHICS_DRIVER_TDR_FAULT

CUSTOMER_CRASH_COUNT: 1

BUGCHECK_STR: 0x116

PROCESS_NAME: System

CURRENT_IRQL: 0

ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) amd64fre

STACK_TEXT:
fffff880`02921a48 fffff880`0566b140 : 00000000`00000116 fffffa80`07ac84e0 fffff880`0513c15c ffffffff`c000009a : nt!KeBugCheckEx
fffff880`02921a50 fffff880`0563e867 : fffff880`0513c15c fffffa80`0b442000 00000000`00000000 ffffffff`c000009a : dxgkrnl!TdrBugcheckOnTimeout+0xec
fffff880`02921a90 fffff880`0566af4f : fffffa80`ffffd84d ffffffff... Read more

http://www.sevenforums.com/bsod-help-support/330775-blue-screen-death-bsod-bsod-error-0x0000016.html
Relevancy 21.93%

Have a rather annoying problem System details - Windows x - Intel Quad Core Processor - nVidia GT - TB Seagate HDD brand new Right so when I turn on the computer It'll load up fine no problems log in to my account and desktop loads fine I might be able to run Firefox to browse the web However within - minutes of Windows starting it will freeze and I can only move the mouse however clicking anything is Windows freeze, BSOD. on BSOD Safemode. Hang, Bios 7 useless even dragging the mouse on the desktop doesn't work Task Manager doesn't open either on Ctrl Alt Del even on a Non-USB keyboard The mouse is movable for - minutes before I get a Bluescreen of Bios Hang, Windows 7 freeze, BSOD. BSOD on Safemode. death and system restart On restart BIOS hangs on quot Memory runs at dual channel interleaved quot and doesn't seem to detect the HDD After seconds it'll flash and give me a SYSTEM BOOT FAILURE PLEASE INSERT SYSTEM DISK AND PRESS ENTER I actually got out the system disk and popped it in pressed Enter and it gave me the same message If I turn off the computer and leave it off for minutes I can boot successfully again HDD detected boot up to Windows again log in but the system freezes again It did the same yesterday however took longer to crash so I did a Full system scan with Avast which turned up no viruses trojans or infected files Honestly I really don't have any idea what it could be If any more info is needed please ask I'll reply ASAP

A:Bios Hang, Windows 7 freeze, BSOD. BSOD on Safemode.

Sounds like it could be something heat related. Is this a laptop or desktop?

http://www.techsupportforum.com/forums/f217/bios-hang-windows-7-freeze-bsod-bsod-on-safemode-647630.html
Relevancy 21.93%

- x86 (32-bit) or x64 ? x64
- the original installed OS on the system? Windows 7 x64
- an OEM or full retail version? Full retail
- What is the age of system (hardware)? April 2012
- What is the age of OS installation (have you re-installed the OS?) May 2012

I have BSOD only a couple of times other than running the swtor launcher, but that is primarily when it happens and the only way I can reliably reproduce a bsod.

Attached are the dumps, the last 2 dumps were with driver verifier running (crashed upon boot-up)
I can run memtest86 for hours (16+ cycles complete) with no errors, prime95 with no errors, and IntelBurnTest with no problems.
Temperatures are not excessive, I have never gotten above 45C on the cpu or 55C on the mainboard under maximum stress.

I don't know what else to try - Thanks in advance!

A:BSOD Running SWTOR Launcher, followed BSOD Posting instructions

We've seen a number of BSOD issues with SSD's. Here's the information that I've compiled so far:





Quote:
There's not a whole bunch available to test SSD's. The "easiest" test is to remove the SSD, install a platter-based hard drive, install Windows and test for stability that way.

Here's some suggestions:
- Update the SSD's firmware to the latest available version (VERY IMPORTANT!!!)
- Update the motherboard controllers drivers to the latest available version from the controller manufacturer (NOT the mobo manufacturer unless you can't find any on the controller manufacturer's website)
- Slow the memory (RAM) down to the next slower speed (I've only seen one person who claimed that this worked for them).
- Use any manufacturer's utilities that you may have. If you don't have any, then try this free one (I haven't used it myself): Crystal Dew World
- Update chipset and storage controller drivers to the latest available from the manufacturer of the device (not the manufacturer of the motherboard). Be sure to update ALL controllers on the motherboard!
....NOTE: Recently (Nov 2011) we had BSOD issues with the Marvell 91xx controller and an SSD. You may have to switch controllers also.-
Replace the SSD with a platter based hard drive and see if that stops the BSOD's. If it does, then it's likely that there's a problem with the SSD OR an incompatibility with your system.
It's my opinion that SSD's aren't reliable enough (with current hardware) to be used on a system that needs to work reliably. Until I see reliability I will not recommend, nor will I use, SSD's for critical applications.
06 Dec 2011 - This post tends to confirm issues with certain SSD chipsets and certain controllers - [SOLVED] cant find the cause of BSOD F4 - Tech Support Forum
29 May 2012 - The frequency of BSOD's with SSD's seems to have been decreasing over the last several months. It may be approaching time to re-evaluate my stand on their suitability for use in production systems.


ATI HDMI Audio is disabled. Is this deliberate? If so, why?
Please re-enable it, update the drivers, then disable it again if so desired.

I strongly suspect your Razer device - and it may even be hardware related. So update the Razer drivers. If that doesn't fix it, then uninstall the software and physically remove the device from your system.

You have 2 versions of AMD Overdrive installed. Please make sure that they are both removed. Here's my suggestions:





Quote:
AMD OverDrive (AODDriver2.sys) is either a stand-alone application, or a component of the AMD VISION Engine Control Center. This driver is known to cause BSOD's on some Win7 systems.





Quote:
Please uninstall all AMD/ATI video stuff from Control Panel...Programs...Uninstall a program
Then, download (but DO NOT install) a fresh copy of the ATI drivers from Global Provider of Innovative Graphics, Processors and Media Solutions | AMD (in the upper right corner of the page)
Use this procedure to install the DRIVER ONLY: ATI video cards - DRIVER ONLY installation procedure

If the device (AODDriver or AODDriver4.01) remains a problem, open Device Manager, select the "View" item.
Then select "Show hidden devices" and scroll down to the Non-Plug and Play Drivers section.
Locate the AODDriver entry, right click on it and select "Uninstall". Reboot for changes to take affect.


Sometimes the driver remains and continues to cause BSOD's. If this is the case for you, post back and we'll give further instructions for safely removing it.

If overclocking, please stop. Remove the overclock and return the system to stock/standard values while we're troubleshooting. Once the system is stable again, feel free to resume the overclocking.


Gigabyte's EasyTune6 and Gigabyte's EasySaver are known to cause BSOD's with some Win7 systems - please uninstall them immediately!

Daemon Tools (and Alcohol % so... Read more

http://www.sevenforums.com/bsod-help-support/237017-bsod-running-swtor-launcher-followed-bsod-posting-instructions.html
Relevancy 21.93%

Hi everyone After restarting the computer following a malwarebytes scan I could not get into window nor safe mode and system restore malwarebytes and BSOD following windows running after scan a restarting after xp BSOD by pressing F at start up What I only had after running a little while is BSOD Btw I ran diagnostic BSOD after restarting following a malwarebytes scan and BSOD after running windows xp test a few times All passed After this happened and I did some searching online I decided to run a windows xp repair by using the original OEM window xp installation CD sp when the system inside the computer is sp after I updated it long ago I followed the processes suggested by the following webpage Windows XP Home Repair Guide It was all fine until Part in that webpage A BSOD popped out after the windows symbol in Part And I noticed some new sentences at the bottom of the BSOD which are like physical memory dump Hopefully solutions for all of this would be recommended by someone I don t even really dare to switch the computer back on now Sorry if I have posted in the wrong section of the forum If I have done it please move this post to the right section Thank you in advance

A:BSOD after restarting following a malwarebytes scan and BSOD after running windows xp

Boot off of the Windows Disc Or download the Recovery Console ISO. Burn it to CD with IMGBurn Boot off of the CD and get to the Recovery Console. Here type chkdsk /R and press enter. The Check Disk utility will try and fix any file errors.
You can also download the ISO image for Seatools, or WD DataLifeGuardin my signature and burn the image to a CD using IMGBurn also in my signature and boot off of the newly created CD and run the Quick and Advanced tests on the HDD to test the integrity of the drive.

http://www.techsupportforum.com/forums/f10/bsod-after-restarting-following-a-malwarebytes-scan-and-bsod-after-running-windows-xp-657809.html
Relevancy 21.93%

I was just playing around with my laptop and I received the dreaded BSoD. The error I was given was APC_INDEX_MISMATCH with the hexadecimal code 0x00000001. I have had this had to my laptop multiple times and I am asking if someone could please help. I also had to add the "Seven Forums" zip file made by using SF Diagnostic Tool.

A:BSOD Messing aroung on my Pavilion dv7-3165 then bsod with 0x00000001

Welcome
We dont have the files that you said you added.

http://www.sevenforums.com/bsod-help-support/243711-bsod-messing-aroung-my-pavilion-dv7-3165-then-bsod-0x00000001.html
Relevancy 21.93%

Short version My BSOD games, with 2 Random when Starcraft persistant playing BSOD PC is getting a BSOD at random times when full screen gaming The BSOD screen says the video card times out Long Version I have a gaming PC that a friend generously gave me when he built a new one It's worked great but in November Random BSOD when playing games, persistant BSOD with Starcraft 2 the Tagan Random BSOD when playing games, persistant BSOD with Starcraft 2 ITZ watt power supply died He had planned to do SLI and never did so during Neweggs holiday sale I Random BSOD when playing games, persistant BSOD with Starcraft 2 picked up a Corsair Enthusiast Series TX thinking it should be sufficient Everything has run smoothly with the new PSU except for the fact that when playing games like Torchlight and Starcraft my machine will BSOD I had random BSOD's with Starcraft and then suddenly had nights in a row with no problems and then today it keeps crashing at the same spot in the campaign There is little consistency to the crashes other than that and under normal operations like email web browsing etc it has only BSOD'd once and that was during a youtube video My first thought is that the one thing that has changed recently is the PSU and prior to that I only recall a rare crash here and there I thought maybe my new PSU wasn't good enough but everything I've read online about the requirements for the GTX including the manual say watt minimum and I exceed that Here is a list of things I have tried - Updated video card and mobo drivers I have also uninstalled the nvidia drivers run Driver Sweeper in safe mode and reinstalled drivers in normal mode - Ran GPU-Z to look at temperatures and ran OCCT to stress test the GPU and GPU Ram - Ran memtest for hours passes - Tried running the video card in another PCI-E slot - Tried running games at lower graphical settings with no success - Currently running Driver Verifier I'm maybe hours in and plan to let it run - So far it hasn't caused a BSOD - I also found a link talking about the TDR errors with Windows and added items to the registry that were supposed to help give the video card seconds to catch up but Starcraft still froze up so I have since removed the registry items I added - Run error-checking via Windows on both HDD - I have not done any overclocking I think my video card comes with some overclocked settings but in the bios the clock speed is the lowest it can go That's all I can think of right now hope I didn't forget anything Any help is most appreciated Attached is the SF Diagnostic zip I have Bluescreen Viewer installed just not sure what the best way is to post it I only have mini dumps right now because when I installed CCleaner it removed them All dumps were from trying to play the mission Supernova in Starcraft I have since uninstalled CCleaner for now to be sure I keep the minidumps intact

A:Random BSOD when playing games, persistant BSOD with Starcraft 2

Hello Haze.

Click Start.
In the search bar, Typr "services.msc" without quotes.
Click the resulting link.
When the windoe will appear, scroll down to "nvidea update service daemon"
Then do it:
Does it change the situation anyhow? Let us know.

http://www.sevenforums.com/bsod-help-support/273652-random-bsod-when-playing-games-persistant-bsod-starcraft-2-a.html
Relevancy 21.93%

Howdy all new user here Files Problems, SF BSOD BSOD Utility Random Included looking to isolate a blue screen problem that makes me quite sad as it's becoming rather annoying A friend a while back years-ish solved a bsod problem with you guy's help and I thought I would do the same Random BSOD Problems, SF BSOD Utility Files Included I read and followed the quot Blue Screen of Death BSOD Posting Instructions quot and have attached it to this post Here is a mirror download http www filedropper com sevenforums This blue screen occurs at random intervals it seems the first occurrence happened about a week ago while playing StarCraft II with a friend however I am convinced that the blue screen happens at random because I has occurred multiple times while doing pretty much nothing besides surfing the web Whenever the BSOD occurs there is something that says quot Driver IRQL Not Less Than Or Equal quot I think If there is anything else I can provide you fine folk in order to isolate and hopefully fix this problem please give me a shout and I will do my best to provide it

A:Random BSOD Problems, SF BSOD Utility Files Included

shameless bump

http://www.sevenforums.com/bsod-help-support/243307-random-bsod-problems-sf-bsod-utility-files-included.html
Relevancy 21.93%

I keep getting BSODs when I play games for a short while At first I thought when BSOD says ntoskrnl.exe games. BSOD BlueScreenView caused playing it was a bad installation of Windows BSOD when playing games. BlueScreenView says ntoskrnl.exe caused BSOD so I did a clean format full of my SSD and a clean install of Windows Ultimate x Installation failed quite a few times before finally succeeding Tried another copy of Windows same install failures I finally finished reinstalling Windows on my PC I suspected the RAM to be at fault so I ran MemTest and found a ton of errors Upon closer inspection of the BIOS settings I found that my board was clocking my ram in Auto mode at mhz instead of the factory mhz Corsair Vengeance LP DDR CAS on Asus Sabertooth Z I updated my BIOS to the latest as of this posting and I still have to manually set the memory frequencies for it to run at mhz Everything seemed fine for a few hours running prime I supposed my PC was fine now after that clean install of Windows but a few minutes into playing Battlefield I BSOD I am no pro at reading dump files and I was hoping someone could help me isolate the sources of my BSODs I've attached the minidump files for each BSOD below Thanks

A:BSOD when playing games. BlueScreenView says ntoskrnl.exe caused BSOD

My system specs are:

Intel Core i7-3770
Asus Sabertooth Z77
Corsair Vengeance Low Profile DDR3 @1600mhz CAS9
Kingston HyperX 3k 120GB SSD (boot, Battlefield 3, Microsoft Office)
Asus DirectCUII GTX 670
Thermaltake Toughpower 1200 watt
Razer Blackwidow Ultimate
Cyborg RAT7 Mouse

http://www.sevenforums.com/bsod-help-support/240280-bsod-when-playing-games-bluescreenview-says-ntoskrnl-exe-caused-bsod.html
Relevancy 21.93%

Something I found out tonight just now through Dell Technical Support here from my PC as my notebook crashed amp burned was a cool way to run in Helpful BSOD Dell (or BSOD general?) Laptop Workaround some great diagnostic tests Helpful Dell Laptop BSOD Workaround (or BSOD in general?) was to do the following Even with seemingly unworkable problems like DVD stuck in drive non quot tray quot system one like a car CD player BCD Boot error with xc f code you can Hit power on Fn key and hold until you hear an unusual non quot Beep quot beep It's an irregular system driver noise Let all tests cycle and at the end answer quot no quot to the final test Resetting BIOS to factory defaults after the fact will allow you to in most cases assuming you're current on revisions in my case A with a Studio with Windows x Home Premium Vista x Ultimate disable all unnecessary hardware options when it comes to this situation WLAN etc SATA to IDE is important to set Configuring USB as a bootable device will differ on almost every BIOS brand Phoenix AMI Award etc is pertinent download if you've got the same error as me SourceForge's UNetbootin I've tried lots of utilities just to see what's out there That particular one is the simplest and fastest way to make a BOOTABLE ISO image out of a Windows DVD with at least a GB flash drive good FYI to throw in there I hope this benefits someone out there in the BSOD land v

http://www.vistax64.com/crashes-debugging/286647-helpful-dell-laptop-bsod-workaround-bsod-general.html
Relevancy 21.93%

Newly built PC, graphics card drivers are fully updated, using windows 7 ultimate which has SP1 installed. Posting dump file below, has multiple dumps from when i bought the PC (Dump files range over about a week)

A:BSOD When exiting games inconsistently + Random BSOD consistently

Is no one able to help? had 2 more BSOD since posting this

http://www.sevenforums.com/bsod-help-support/354562-bsod-when-exiting-games-inconsistently-random-bsod-consistently.html
Relevancy 21.93%

The system just bsod while watching video on chrome. The bluescreen was locked with a sound repeated in background. It did not restart itself as is normal.

I have recently updated my video drivers and I believe all other drivers to be current. I recently ran memtest 86+ for 7 full passes with no errors, but it could still be the memory as the modules are new(about a month).



Ignore the old minidumps as they are the result of tweaking/overclocking my system. The dump of interest is from today and is attached separately from jcgriff.

My system is the same as in my user profile.

Win 7Ultimate 64bit.
Microsoft security essentials and Malwarebytes are used for realtime protection and scanning.

This is the first non OCing bsod I've had on my rig in a long time,

Please help

A:BSOD in chrome playing vid, BSOD locked with sound in background

  
Quote: Originally Posted by Beast52702


The system just bsod while watching video on chrome. The bluescreen was locked with a sound repeated in background. It did not restart itself as is normal.

I have recently updated my video drivers and I believe all other drivers to be current. I recently ran memtest 86+ for 7 full passes with no errors, but it could still be the memory as the modules are new(about a month).

Ignore the old minidumps as they are the result of tweaking/overclocking my system. The dump of interest is from today and is attached separately from jcgriff.

My system is the same as in my user profile.

Win 7Ultimate 64bit.
Microsoft security essentials and Malwarebytes are used for realtime protection and scanning.

This is the first non OCing bsod I've had on my rig in a long time,

Please help


Unfortunately the most recent was inconclusive. We can do some testing while waiting for the next one. Most often it is memory or driver related.

Please run these two tests.

1-Memtest.

*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

RAM - Test with Memtest86+

2-Driver verifier






Quote:
I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.


Driver Verifier - Enable and Disable

http://www.sevenforums.com/bsod-help-support/187757-bsod-chrome-playing-vid-bsod-locked-sound-background.html
Relevancy 21.93%

BSOD, Win7Pro64Sp1, boots ok to Desktop, then BSOD with Driver message, too quick to read, Safe Mode OK,
System Recovery, Image Restore, Disk and Memory Diagnostics performed; still crashing.
Zip file attached as requested.
Help Please,
Harald

A:BSOD Win7Pro64Sp1, Boot ok to Desktop, then BSOD with Driver..,Safe OK

Here is the Zip file with the info requested for BSOD post.

http://www.sevenforums.com/bsod-help-support/185943-bsod-win7pro64sp1-boot-ok-desktop-then-bsod-driver-safe-ok.html
Relevancy 21.93%

I installed an antivirus program and Adobe Acrobat on Win 7 64 bit ultimate. It requested a system restart. Upon restart, I had a BSOD immediately after the Windows 7 splash screen (before Win requests my user password). Upon BSOD, it auto-restarted my PC and automatically brought me in to Windows repair. After waiting 45 minutes and seeing Windows repair wasn't doing anything, I just turned off and turned on my PC. I got another BSOD. Then, I rebooted again, and it was able to load into Windows.

I've attached my dump file. Any what's causing this and how I can fix?

Thanks.

A:BSOD after reboot for program install. BSOD @ Win 7 splash screen

Your ati driver is causing the BSOD

Code:
Loading User Symbols
Loading unloaded module list
.....
*** WARNING: Unable to verify timestamp for atikmpag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmpag.sys
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1000007E, {ffffffffc0000005, fffff80002c010f3, fffff88002fd22b8, fffff88002fd1b20}

Probably caused by : atikmpag.sys ( atikmpag+10aec )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e)
This is a very common bugcheck. Usually the exception address pinpoints
the driver/function that caused the problem. Always note this address
as well as the link date of the driver/image that contains this address.
Some common problems are exception code 0x80000003. This means a hard
coded breakpoint or assertion was hit, but this system was booted
/NODEBUG. This is not supposed to happen as developers should never have
hardcoded breakpoints in retail code, but ...
If this happens, make sure a debugger gets connected, and the
system is booted /DEBUG. This will let us see why this breakpoint is
happening.
Arguments:
Arg1: ffffffffc0000005, The exception code that was not handled
Arg2: fffff80002c010f3, The address that the exception occurred at
Arg3: fffff88002fd22b8, Exception Record Address
Arg4: fffff88002fd1b20, Context Record Address

Debugging Details:
------------------


EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

FAULTING_IP:
nt!ExFreePoolWithTag+43
fffff800`02c010f3 418b45f0 mov eax,dword ptr [r13-10h]

EXCEPTION_RECORD: fffff88002fd22b8 -- (.exr 0xfffff88002fd22b8)
ExceptionAddress: fffff80002c010f3 (nt!ExFreePoolWithTag+0x0000000000000043)
ExceptionCode: c0000005 (Access violation)
ExceptionFlags: 00000000
NumberParameters: 2
Parameter[0]: 0000000000000000
Parameter[1]: ffffffffffffffff
Attempt to read from address ffffffffffffffff

CONTEXT: fffff88002fd1b20 -- (.cxr 0xfffff88002fd1b20)
rax=0000000000000000 rbx=fffffa800692d880 rcx=0069007200750063
rdx=000000005958504b rsi=0000000000000000 rdi=fffffa800692d880
rip=fffff80002c010f3 rsp=fffff88002fd24f0 rbp=fffffa8006362b10
r8=0000000000006680 r9=00000000000000c0 r10=fffff80002a5d000
r11=0000000000000290 r12=fffffa80049e6d40 r13=0069007200750063
r14=fffff88004857110 r15=fffffa8004780a20
iopl=0 nv up ei pl nz na po nc
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010206
nt!ExFreePoolWithTag+0x43:
fffff800`02c010f3 418b45f0 mov eax,dword ptr [r13-10h] ds:002b:00690072`00750053=????????
Resetting default scope

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

PROCESS_NAME: System

CURRENT_IRQL: 0

ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

EXCEPTION_PARAMETER1: 0000000000000000

EXCEPTION_PARAMETER2: ffffffffffffffff

READ_ADDRESS: GetPointerFromAddress: unable to read from fffff80002d040e0
GetUlongFrom... Read more

http://www.sevenforums.com/bsod-help-support/271649-bsod-after-reboot-program-install-bsod-win-7-splash-screen.html
Relevancy 21.93%

Here's the clif notes: Got a brand new (not refurb) lenovo desktop. win 7 62 bit - blue screen all the time, random times. I'm not a gamer, i had very little installed.

Took a picture, called support with the code, they sent a guy out and he replaced my motherboard. All seemed good - for a few hours. Got two new bsod. Attached are the 2 recent minidumps and a screenshot of my specs, and that other file requested.

Hope you guys can help. I am still under warrantee and can probably raise hell and get another new machine, but it's been 3 weeks and I just want to use the thing

Thanks

A:New Lenovo - BSOD, Warrantee Replaced Motherboard, New BSOD 3 weeks

Hello, welcome to SevenForums!

Nothing shown as far as processes go, and you have a 109* critical structure corruption bugcheck for one of the two dumps, so it's most likely hardware related, usually memory of hard drive.

I would recommend running Memtest to ensure your memory isn't faulty.

Check your hard drive for any errors as well with chkdsk:

Open the "Computer" window
Right-click on the drive in question
Select the "Tools" tab
In the Error-checking area, click <Check Now>.
Drivers in need of update:





Quote:

LVUSBS64.sys - LVUSBS64 Thu Oct 11 21:39:40 2007 (Logitech Camera driver). Update here.



Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff960001360e8, Address of the instruction which caused the bugcheck
Arg3: fffff8800a9cad00, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.

Debugging Details:
------------------
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

FAULTING_IP:
win32k!GreUpdateSpriteVisRgn+c8
fffff960`001360e8 498b5528 mov rdx,qword ptr [r13+28h]

CONTEXT: fffff8800a9cad00 -- (.cxr 0xfffff8800a9cad00)
rax=fbfff900c0ce84a0 rbx=fffffa8009de7bf0 rcx=040006ff3f317b48
rdx=0000000000000100 rsi=fffff900c00d20a0 rdi=0000000000000001
rip=fffff960001360e8 rsp=fffff8800a9cb6e0 rbp=fffff900c00d2280
r8=fffff900c00d20a0 r9=0000000000000000 r10=fffff900c00d20a0
r11=fffff900c334ca80 r12=0000000000000000 r13=fbfff900c0ce84a0
r14=0000000000000004 r15=fffff900c0e00b90
iopl=0 nv up ei ng nz na po nc
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00210286
win32k!GreUpdateSpriteVisRgn+0xc8:
fffff960`001360e8 498b5528 mov rdx,qword ptr [r13+28h] ds:002b:fbfff900`c0ce84c8=????????????????
Resetting default scope

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

BUGCHECK_STR: 0x3B

PROCESS_NAME: chrome.exe

CURRENT_IRQL: 0

LAST_CONTROL_TRANSFER: from 0000000000000000 to fffff960001360e8

STACK_TEXT:
fffff880`0a9cb6e0 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : win32k!GreUpdateSpriteVisRgn+0xc8
FOLLOWUP_IP:
win32k!GreUpdateSpriteVisRgn+c8
fffff960`001360e8 498b5528 mov rdx,qword ptr [r13+28h]

SYMBOL_STACK_INDEX: 0

SYMBOL_NAME: win32k!GreUpdateSpriteVisRgn+c8

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: win32k

IMAGE_NAME: win32k.sys

DEBUG_FLR_IMAGE_TIMESTAMP: 4f10ff24

STACK_COMMAND: .cxr 0xfffff8800a9cad00 ; kb

FAILURE_BUCKET_ID: X64_0x3B_win32k!GreUpdateSpriteVisRgn+c8

BUCKET_ID: X64_0x3B_win32k!GreUpdateSpriteVisRgn+c8

Followup: MachineOwner

------------------------------------

*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

CRITICAL_STRUCTURE_CORRUPTION (109)
This bugcheck is generated when the kernel detects that critical kernel code or
data have been corrupted. There are generally three causes for a corruption:
1) A driver has inadvertently or deliberately modified critical kernel code
or data. See htt... Read more

http://www.sevenforums.com/bsod-help-support/216169-new-lenovo-bsod-warrantee-replaced-motherboard-new-bsod-3-weeks.html
Relevancy 21.93%

Hi guys I badly need your hours. is computer No BSOD playing games when idle. for when BSOD help I started BSOD when computer is idle. No BSOD when playing games for hours. getting BSOD two weeks ago As far as I can remember the first time I had a BSOD was on the day I installed Max Payne BSOD when computer is idle. No BSOD when playing games for hours. I read somewhere that the some guy had also this problem when he installed max payne There were two occasions that I got a BSOD upon starting Max Payne But lately I'm getting BSOD when doing low-load stuffs like browsing with no other apps opened I've already done memtest with passes with no errors I'm hours prime stable I just don't get it I've manually set my timings for my ram I'm not doing any overclock Everything is on stock settings Can someone please take a look on my attachment Any help will be gladly appreciated Thank you so much Oh btw here's my system specs Win bit I - k at stock Maximus IV Extreme G Skill gb OCZ gb SSD Kingwin Lazer w psu GTX at stock

A:BSOD when computer is idle. No BSOD when playing games for hours.

@writhziden can you please help me?

http://www.sevenforums.com/bsod-help-support/238361-bsod-when-computer-idle-no-bsod-when-playing-games-hours.html
Relevancy 21.93%

Is Windows 7 . . .
- x64
- the original installed OS on the system? Windows 7 Ultimate x64
- an OEM or full retail version? Retail

- What is the age of system (hardware)? ~1 year
- What is the age of OS installation (have you re-installed the OS?) ~1 year, I installed it when I got the laptop.

Also, one of my USB ports is not working, it has been like that for a while. The sound jack is also broken i fell on the headphone cord. The sound still works, just have to move it a bit. I'm about to send it in to get the hardware repaired and was hoping I could get an answer here on the BSOD before hand. The laptop is a Sager W860CU. Thanks!

I'm currently scanning with Avast.

I took a picture of the BSOD with my phone. Hopefully you can see all the characters.

Thanks!

C3

A:BSOD randomly (?) When waking laptop after sleeping, BSOD pic attached

  
Quote: Originally Posted by C3H5N3O9


Is Windows 7 . . .
- x64
- the original installed OS on the system? Windows 7 Ultimate x64
- an OEM or full retail version? Retail

- What is the age of system (hardware)? ~1 year
- What is the age of OS installation (have you re-installed the OS?) ~1 year, I installed it when I got the laptop.

Also, one of my USB ports is not working, it has been like that for a while. The sound jack is also broken i fell on the headphone cord. The sound still works, just have to move it a bit. I'm about to send it in to get the hardware repaired and was hoping I could get an answer here on the BSOD before hand. The laptop is a Sager W860CU. Thanks!

I'm currently scanning with Avast.

I took a picture of the BSOD with my phone. Hopefully you can see all the characters.

Thanks!

C3


Related to a smserial.sys Motorola SM56 Modem WDM Driver. Yours is 3 years old. I would update to most recent.

http://www.sevenforums.com/bsod-help-support/208071-bsod-randomly-when-waking-laptop-after-sleeping-bsod-pic-attached.html
Relevancy 21.93%

Hi. I've been having this problem for about one year now and I decided it's time I sought online help. My PC is about 2 and a half years old and the current windows installation is roughly 2 years old (windows 7 professional x64 from microsoft academic alliance...).
Crashes/freezes happen at random times (I had gone about a month with none) and not when a particular program is running. I've attached minidump files and system health report.

A:BSOD BSOD Driver irql-not-less-or-equal/freezes with immediate restart

Related to netr7364.sys 802.11 USB Wireless Adapter Driver from Ralink Technology, Corp. I would re-install newest

ALSO

Asacpi.sys

The pre 2009 version of this driver is a known BSOD cause.





Quote:
Please visit this link: Asus tek computer inc. -support- drivers and download p7p55d le

ASUSTeK Computer Inc. -Support- Drivers and Download P7P55D LE
ASUSTeK Computer Inc. - Motherboards- ASUS P5K-VM

Scroll down to the utilities category, then scroll down to the "atk0110 driver for windowsxp/vista/windows 7 32&64-bit" (it's about the 12th item down).

Download and install it.

Go to c:\windows\system32\drivers to check and make sure that the asacpi.sys file is date stamped from 2009 or 2010 (not before).

http://www.sevenforums.com/bsod-help-support/231794-bsod-bsod-driver-irql-not-less-equal-freezes-immediate-restart.html
Relevancy 21.93%

Hey, so I was playing SWTOR and I got the BSOD. It has occurred several times in the past day. Here is the information.

I have run memtest already and have had 0 errors. I have all my drive up to date. I also reformatted my computer-NOT REPAIR, but FULL WIPE.

I have attached information via the instructions in thread.

Thank you for your time.

A:BSOD playing SWTOR, BSOD error SYSTEM_SERVICE_EXCEPTION (0x0000003b)

The crash dump blames hardware.

Re run these tests again

RAM - Test with Memtest86+

errors might be detected after 7 passes

Do this overnight

Also

Hardware - Stress Test With Prime95

http://www.sevenforums.com/bsod-help-support/269489-bsod-playing-swtor-bsod-error-system_service_exception-0x0000003b.html
Relevancy 21.93%

Good Afternoon,

In the past couple of months, I've had multiple instances of BSOD and have tried to solve on my own; but to no avail, I have been unsuccessful and I am now here.

Here's the BSOD messages that I have seen:
11/17 - DRIVER_IRQL_NOT_LESS_OR_EQUAL (tcpip.sys)
11/17 - SYSTEM_SERVICE_EXCEPTION
11/10 - ATTEMPTED_WRITE_TO_READONLY_MEMORY
9/10 - DRIVER_VERIFIER_DETECTED_VIOLATION - used memtest86 and found no issues with RAM
9/10 - KMODE_EXCEPTION_NOT_HANDLED (mv91xx.sys) - think I solved
9/6 - KMODE_EXCEPTION_NOT_HANDLED - think I solved

Thank you,

Jace

A:BSOD playing World of Warcraft, multiple BSOD Instances

Hello Jace and welcome to TenForums

Please help us to help you by attaching the files as stated at the top: Blue Screen of Death (BSOD) Posting Instructions

http://www.tenforums.com/bsod-crashes-debugging/70085-bsod-playing-world-warcraft-multiple-bsod-instances.html
Relevancy 21.93%

OS - Vista Windows Windows -bit x -bit or x bit What was original installed OS on system Windows bit Is the OS an freeze, Hang, Safemode. 7 BSOD on BSOD. Windows Bios OEM version came pre-installed on system or full retail version YOU purchased it from retailer Full retail Age of system hardware HDD brand new rest of system around years old Age of OS installation - have you re-installed the OS Fresh installation few weeks ago CPU Intel Quad Core Video Card Nvidia GeForce GT MotherBoard Gigabyte GA-G M-S L Power Supply - brand amp wattage ATX AC input V Hz A DC Output V V V - V - V Vsb A A A A --- A System Manufacturer Custom built Exact model number if laptop check label on bottom Custom built Right so when I turn Bios Hang, Windows 7 freeze, BSOD. BSOD on Safemode. on the computer It'll load up fine no problems log in to my account and desktop loads fine I might be able to run Firefox to browse the web However within - minutes of Windows starting it will freeze and Bios Hang, Windows 7 freeze, BSOD. BSOD on Safemode. I can only Bios Hang, Windows 7 freeze, BSOD. BSOD on Safemode. move the mouse however clicking anything is useless even dragging the mouse on the desktop doesn't work Task Manager doesn't open either on Ctrl Alt Del even on a Non-USB keyboard The mouse is movable for - minutes before I get a Bluescreen of death and system restart On restart BIOS hangs on quot Memory runs at dual channel interleaved quot and doesn't seem to detect the HDD After seconds it'll flash and give me a SYSTEM BOOT FAILURE PLEASE INSERT SYSTEM DISK AND PRESS ENTER I actually got out the system disk and popped it in pressed Enter and it gave me the same message If I turn off the computer and leave it off for minutes I can boot successfully again HDD detected boot up to Windows again log in but the system freezes again It did the same yesterday however took longer to crash so I did a Full system scan with Avast which turned up no viruses trojans or infected files Honestly I really don't have any idea what it could be If any more info is needed please ask I'll reply ASAP

http://www.techsupportforum.com/forums/f299/bios-hang-windows-7-freeze-bsod-bsod-on-safemode-647962.html
Relevancy 21.93%

Hello and greetings to all.

I dint understand my pc now..after i fresh format my pc after 2years of usage, i on genuine windows and uptodate till today..but i seems cant leave my pc on idle/downloading most of the time...when i wake up, my pc already restarted..just now while im watching a long series of drama, i get bsod and it said "BAD POOL HEADER"..its the first time i can catch the bsod error..please see attachment for the minidump..

A:BSOD when cpu is idle for long period, no bsod while gaming 4~8hours

Hi udin901.

The latest dump gives a notion that BitDefender caused the BSOD.

Code:
fffff880`0b267968 fffff880`0162d904Unable to load image avc3.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for avc3.sys
*** ERROR: Module load completed but symbols could not be loaded for avc3.sys
avc3+0xf904
Description here: Driver Reference Table - avc3.sys

The previous one states it clearly.

Code:
BugCheck C5, {8, 2, 0, fffff80003011127}

*** WARNING: Unable to verify timestamp for bdfndisf6.sys
*** ERROR: Module load completed but symbols could not be loaded for bdfndisf6.sys
Probably caused by : bdfndisf6.sys ( bdfndisf6+1445 )

Followup: MachineOwner
---------
Description here: Driver Reference Table - BdfNdisf6.sys

Uninstall BitDefender. How to uninstall Bitdefender

Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.

Download, install and update those, and then run full system scans with both of them, one by one.

Free up the startup. Windows does not need any other program to auto start with it, but the auto start programs often conflicts and causes various problems including BSODs.
Click on the Start button
Type ?msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the ?Startup? tab.
Deselect all items other than the antivirus.
Apply > OK
Accept then restart.
Let us know the result.

http://www.sevenforums.com/bsod-help-support/327240-bsod-when-cpu-idle-long-period-no-bsod-while-gaming-4-8hours.html
Relevancy 21.93%

Hello I'm getting random BSOD's on my HP DV - eo Laptop At most times there is no quot real quot bluescreen appearing Instead the computer just freeze and then go black and I've to shut it down manually But sometimes there is a real bluescreen appearing and it says quot an attempt to reset the display driver and 2090eo 0x116 Bugcheck random x64 BSOD BSOD's DV6 Win7 recover from a timeout failed BSOD Bugcheck 0x116 Win7 x64 DV6 2090eo random BSOD's quot and some other times the quot Video TDR error quot message has appeared I've learned that this is a bugcheck x quot BSOD and I've read about solutions such as updating BSOD Bugcheck 0x116 Win7 x64 DV6 2090eo random BSOD's Video Driver check the temperature updating other drivers and so on I've tried several video drivers updated other outdated drivers and nothing works I don't think its a heatrelated problem as I sometimes get BSOD about min after start up Actually I have had freezes like this in periods from about six months after I bought the computer until now bought BSOD Bugcheck 0x116 Win7 x64 DV6 2090eo random BSOD's it at the end of nov The first time I solved it by updating BIOS but know I can't find any new update Other quot BSOD periods quot I've solved by updating video driver and reseting windows to the original quot store-mode quot so to say P Now any solution I can come up with doesn't work and I don't wanna reinstall windows again just for another two months of being BSOD free Anyone got any tips I really need some help Minidumpfile attached

A:BSOD Bugcheck 0x116 Win7 x64 DV6 2090eo random BSOD's

  
Quote: Originally Posted by MrRevolver


Hello!

I'm getting random BSOD's on my HP DV6-2090eo Laptop. At most times there is no "real" bluescreen appearing. Instead the computer just freeze and then go black, and I've to shut it down manually. But sometimes there is a real bluescreen appearing and it says "an attempt to reset the display driver and recover from a timeout failed" and some other times the "Video TDR error" message has appeared. I've learned that this is a bugcheck 0x116" BSOD and I've read about solutions such as updating Video Driver, check the temperature, updating other drivers and so on. I've tried several video drivers, updated other outdated drivers and nothing works. I don't think its a heatrelated problem as I sometimes get BSOD about 1 min after start up.
Actually I have had freezes like this in periods from about six months after I bought the computer until now(bought it at the end of nov 2009). The first time I solved it by updating BIOS, but know I can't find any new update.
Other "BSOD periods" I've solved by updating video driver and reseting windows to the original "store-mode" so to say :P

Now any solution I can come up with doesn't work and I don't wanna reinstall windows again just for another two months of being BSOD free!

Anyone got any tips, I really need some help!

Minidumpfile attached.


Its the directx driver, video card, power, or heat. I would start by re-installing directX

"It's not a true crash, in the sense that the bluescreen was initiated only because the combination of video driver and video hardware was being unresponsive, and not because of any synchronous processing exception.

Since Vista, the "Timeout Detection and Recovery" (TDR) components of the OS video subsystem have been capable of doing some truly impressive things to try to recover from issues which would have caused earlier OSs like XP to crash.

As a last resort, the TDR subsystem sends the video driver a "please restart yourself now!" command and waits a few seconds.

If there's no response, the OS concludes that the video driver/hardware combo has truly collapsed in a heap, and it fires off that stop 0x116 BSOD.

If playing with video driver versions hasn't helped, make sure the box is not overheating.

Try removing a side panel and aiming a big mains fan straight at the motherboard and GPU.

Run it like that for a few hours or days - long enough to ascertain whether cooler temperatures make a difference.

If so, it might be as simple as dust buildup and subsequently inadequate cooling.

I would download cpu-z and gpu-z (both free) and keep an eye on the video temps Let us know if you need help STOP 0x116: VIDEO_TDR_ERROR troubleshooting

http://www.sevenforums.com/bsod-help-support/177729-bsod-bugcheck-0x116-win7-x64-dv6-2090eo-random-bsods.html
Relevancy 21.93%

Apple Macbook Unibody late 2010 or early 2011 cant recall exactly
Nvidia GeForce 320M
2Gigs of ram
Retail windows 7 ultimate x32 fresh from a week ago , tho it happens on x64 also
here it goes, ive been thru this issue for years now, installing bootcamp drivers
then have a poor gaming experience and low fps etc, then updating the drivers through
nvidia, got great fps and everything is all good, then when i leave my computer at school
because they was going to be replaced by the newer macbooks, i get this one, a macbook unibody late 2010, graduated, and now when i want to play games, its the same deal, except that when updating the drivers on the 320M gives me a big fps boost until a random 10-60mins after BSOD, and instant BSOD after display driver recovery when going onto youtube. everything neccessary is attached

A:BSOD on youtube, Display driver Crashing and recovering before BSOD

Update to SP1 - Learn how to install Windows 7 Service Pack 1 &#40;SP1&#41;

Crash was a STOP 0x116
STOP 0x116: VIDEO_TDR_ERROR troubleshooting

You can try updating your video card - NVIDIA DRIVERS 296.10 WHQL

Also, have you monitored the temps of your video card?
Try a GPU stress test - Video Card - Stress Test with Furmark


BSOD BUGCHECK SUMMARY

Code:

*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Built by: 7600.16917.x86fre.win7_gdr.111118-2330
Debug session time: Sun Apr 15 19:02:13.310 2012 (UTC - 4:00)
System Uptime: 4 days 3:50:59.884
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
BUGCHECK_STR: 0x116
BiosReleaseDate = 06/01/10
SystemManufacturer = Apple Inc.
SystemProductName = MacBook7,1
CPUID: "Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz"
MaxSpeed: 2400
CurrentSpeed: 2389
??????????????????????????????????????????????????????????????????????????????????????``

http://www.sevenforums.com/bsod-help-support/224668-bsod-youtube-display-driver-crashing-recovering-before-bsod.html
Relevancy 21.93%

Corrupted WoW patch 5.3 caused my game client and eventually entire computer to lock up upon loading into game, resulting in a BSOD.

I redownloaded and installed the entire game client and it solved the problem of the game locking up.

Everything seemed fine until this morning when I woke up to another BSOD. So I thought I would post the dumps and see if anyone had any idea what caused this one and/or the first one.

Thanks in advanced!

A:BSOD after corrupt World of Warcraft patch, 2nd BSOD days later

It appears that your Asmedia USB 3.0 driver caused the BSOD:


Code:
*** WARNING: Unable to verify timestamp for asmtxhci.sys
*** ERROR: Module load completed but symbols could not be loaded for asmtxhci.sys
ERROR: FindPlugIns 80070005
ERROR: Some plugins may not be available [80070005]
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1000007E, {ffffffffc0000005, fffff8800721b716, fffff88002923708, fffff88002922f60}

Probably caused by : asmtxhci.sys ( asmtxhci+1b716 )

Followup: MachineOwner
---------
Driver Reference Table - asmtxhci.sys

Looking at the driver we can see it is rather old:


Code:
kd> lmvm asmtxhci
start end module name
fffff880`07200000 fffff880`07264000 asmtxhci T (no symbols)
Loaded symbol image file: asmtxhci.sys
Image path: \SystemRoot\system32\DRIVERS\asmtxhci.sys
Image name: asmtxhci.sys
Timestamp: Wed Sep 14 03:36:09 2011 (4E705969)
CheckSum: 0006E608
ImageSize: 00064000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Please update the driver from here: ASMedia Technology Inc. ????

Other things to consider:

Removing Daemon tools, as it is a known causer of BSODs:


Code:
Start Menu\Programs\DAEMON Tools Lite
If you remove Daemon tools be sure to download and run this tool aswell:

DuplexSecure - Downloads

when the tool runs if the uninstall button is grayed out you are done and can close out of the windows if not click it and allow the tool to do its job. DO NOT click the install button it will install a driver known to cause BSODs onto your system.
You may want to think about preforming a clean start up there are many items in your start up which could be slowing your PC down during boot:

Troubleshoot Application Conflicts by Performing a Clean Startup

http://www.sevenforums.com/bsod-help-support/291143-bsod-after-corrupt-world-warcraft-patch-2nd-bsod-days-later.html
Relevancy 21.93%

Hi everyone After restarting the computer following a malwarebytes scan I could not get into window nor safe mode and system restore by pressing F at start up What I only had after running a little while is BSOD Btw I ran diagnostic test a few times All passed After this happened and I did some searching online I decided BSOD a restarting after running xp after BSOD scan windows following malwarebytes and to run a windows xp repair by using the original OEM window xp installation CD sp when the system inside the computer is sp after I updated it long ago I followed the processes suggested by the following webpage http www windowsreinstall com winxphome sp sp installxpcdrepair indexfullpage htm It was all fine until Part in that webpage A BSOD popped out after the windows symbol in Part And I noticed some new sentences at the bottom of the BSOD which are like physical BSOD after restarting following a malwarebytes scan and BSOD after running windows xp memory dump Hopefully solutions for all of this would be recommended by someone I don t even really dare to switch the computer back on now Sorry if I have posted in the wrong section of the forum If I have done it please move this post to the right section Thank you in advance nbsp

A:BSOD after restarting following a malwarebytes scan and BSOD after running windows xp

Can anyone help me? ><
 

https://forums.techguy.org/threads/bsod-after-restarting-following-a-malwarebytes-scan-and-bsod-after-running-windows-xp.1062139/
Relevancy 21.93%

Windows x Windows is the original changed error! major still BSOD! X64 components BSOD Win7 and installed OS Retail Vers System is a year old OS install is less than Months old I am having issues trying to narrow down what is causing my computer to keep crashing I have just about changed every single part in my computer and am going nutts Some of the error I get are x f x x x f xfffff e a x f x x x f xfffff e d BSOD Win7 X64 error! changed major components and still BSOD! x f x x x f xfffff e d x b x c xfffff d xfffff c x x xfffffa c cfe x xfffff f e x If I remember correctly this error started when I installed Norton V It is uninstalled now but it continues to BSOD Win7 X64 error! changed major components and still BSOD! happen This was not happening at all before The Case is well ventilated and has access to air The Processor is cooled with an Arctic Cooling Freezer Pro The parts replaced on my computer are Mother board- EVGA i Graphics- X Gforce GTS BSOD Win7 X64 error! changed major components and still BSOD! mb Processor- from a Q to a Q Memory tested using memtest for days All dimms pass Attached you will find all my dumplogs and all the other files required to help with the issues Please help Thanks guys

A:BSOD Win7 X64 error! changed major components and still BSOD!

  
Quote: Originally Posted by yearzoro


I am having issues trying to narrow down what is causing my computer to keep crashing. I have just about changed every single part in my computer and am going nutts. Some of the error I get are...

0x0000007f (0x0000000000000008, 0x0000000080050031, 0x00000000000406f8, 0xfffff80002e86a63.

0x0000007f (0x0000000000000008, 0x0000000080050031, 0x00000000000006f8, 0xfffff80002e95d09

0x0000007f (0x0000000000000008, 0x0000000080050031, 0x00000000000006f8, 0xfffff80002e88d09)

0x0000003b (0x00000000c0000005, 0xfffff960001229d0, 0xfffff88005c24010, 0x0000000000000000)

0x00000050 (0xfffffa804c27cfe0, 0x0000000000000001, 0xfffff88004f899e1, 0x0000000000000005)
If I remember correctly this error started when I installed Norton 360 V2010. It is uninstalled now but it continues to happen. This was not happening at all before. The Case is well ventilated and has access to air. The Processor is cooled with an Arctic Cooling Freezer 7 Pro.
The parts replaced on my computer are

Mother board- EVGA 780i
Graphics- 2X Gforce 8800GTS 512mb
Processor- from a Q6600 to a Q9550
Memory tested using memtest for 6 days. All dimms pass.

Attached you will find all my dumplogs. Please help. Thanks guys!


Your most frequent bugcheck is 7F
Usual causes: Memory corruption, Hardware (memory in particular), Installing a faulty or mismatched hardware (especially memory) or a failure after installing it, 3rd party firewall, Device drivers, SCSI/network/BIOS updates needed, Improperly seated cards, Incompatible storage devices, Overclocking, Virus scanner, Backup tool, Bad motherboard, Missing Service Pack

You have a ton of DMP files it is going to take a bit. back soon
Ken

http://www.sevenforums.com/bsod-help-support/96873-bsod-win7-x64-error-changed-major-components-still-bsod.html
Relevancy 21.93%

Hey guys Getting a weird problem with a machine that would shut down after anywhere from hours to a full week It wasn't dumping the memory until I removed a capture card Now it shutdowns. get No BSOD removed, then until BSOD. card Sporadic capture finally has dumped the memory and I'm hoping to gain some insight on the issue I ran memtest for a full night with no errors There is Sporadic shutdowns. No BSOD until capture card removed, then get BSOD. some hardware damage near the storage drives but they are only used to host the video and not the OS The specs are Windows Embedded bit installed with compatibility profile selected OS on WD quot GB Scorpio Blue WD LPVT quot WD TB WD EURS quot WD TB WD EURS Silicon Image SATA card si ASRock z motherboard Intel Core i - GB DDR RAM Silverstone W PSU Nuuo SCB Capture Cards Samsung X DVD Burner Thanks in advance for any insight Also if you guys have any tips on how to analyze these dumps it would be awesome I'd love to be able to look at these files I had a setup before with WinDBG but I was never able to garner the same information as these forums

A:Sporadic shutdowns. No BSOD until capture card removed, then get BSOD.

No antivirus?






Quote:
Use Microsoft Security Essentials.

Recommended from a strict BSOD perspective, compatibility & stability compared to other security software:

Microsoft Security Essentials - Free Antivirus for Windows

Malwarebytes - Free

Good and Free system security combination.


Scan with Kaspersky TDSSKiller:Anti-rootkit utility TDSSKiller

ESET online scanner: Free Online Virus Scanner | ESET

Run a System file check (SFC): SFC /SCANNOW Command - System File Checker

Run Disk Check on your Hard Drive(s): Disk Check

For your BSOD, Please follow the instructions that were given by Dsprague in this thread: Brand new machine, BSOD occasionally while running DVR software.


Dump Output

Code:
Microsoft (R) Windows Debugger Version 6.2.9200.20512 X86
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\Usra\Downloads\jivex5k\SF_10-03-2014\031014-39561-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer EmbeddedNT SingleUserTS
Built by: 7601.18247.amd64fre.win7sp1_gdr.130828-1532
Machine Name:
Kernel base = 0xfffff800`02a14000 PsLoadedModuleList = 0xfffff800`02c576d0
Debug session time: Tue Mar 11 03:03:23.874 2014 (UTC + 6:00)
System Uptime: 0 days 0:18:29.718
Loading Kernel Symbols
...............................................................
................................................................
......................
Loading User Symbols
Loading unloaded module list
....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck D1, {fffff88084c119b3, 2, 1, fffff88004e1e4eb}

Unable to load image scb7000.sys, Win32 error 0n2
*** ERROR: Module load completed but symbols could not be loaded for scb7000.sys
Probably caused by : scb7000.sys ( scb7000+4eb )

Followup: MachineOwner
---------

6: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arguments:
Arg1: fffff88084c119b3, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, value 0 = read operation, 1 = write operation
Arg4: fffff88004e1e4eb, address which referenced memory

Debugging Details:
------------------


WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff80002cc1100
GetUlongFromAddress: unable to read from fffff80002cc11c0
fffff88084c119b3 Nonpaged pool

CURRENT_IRQL: 2

FAULTING_IP:
scb7000+4eb
fffff880`04e1e4eb 893c01 mov dword ptr [rcx+rax],edi

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

BUGCHECK_STR: 0xD1

PROCESS_NAME: MainConsole.ex

TRAP_FRAME: fffff8801f5de620 -- (.trap 0xfffff8801f5de620)
NOTE: The trap frame does not con... Read more

http://www.sevenforums.com/bsod-help-support/324828-sporadic-shutdowns-no-bsod-until-capture-card-removed-then-get-bsod.html
Relevancy 21.93%

Hello All I've been getting consistent BSODs while trying to start Windows Virtual PC not Microsoft Virtual PC machines on my computer I've tried various driver updates and a bios update and several system restores along the way but to no avail In the attached dump files the last two crashes are from trying to start virtual machines the most recent one is when I try always Machines machine, PC Virtual bsod) BSOD Windows Starting (any to start a newly created vmcx and the one before it is when I try to start create the windows xp mode virtual machine The errors are BSOD Starting Windows Virtual PC Machines (any machine, always bsod) very BSOD Starting Windows Virtual PC Machines (any machine, always bsod) consistent and happen every time at the exact same time My setup Windows Professional x i - k CPU ASROCK P Extreme with Bios v x GB RAM c solid state MB OS drive TB samsung spinpoint data drive ATI Radeon graphics card I've never tried posting to a forum before but I'm at my wit's end on this one and the people here seem to be quite knowledgeable and helpful Any help on this would be greatly appreciated Shaun

A:BSOD Starting Windows Virtual PC Machines (any machine, always bsod)

  
Quote: Originally Posted by seantomas


Hello All,

I've been getting consistent BSODs while trying to start Windows Virtual PC (not Microsoft Virtual PC 2007) machines on my computer. I've tried various driver updates and a bios update and several system restores along the way, but to no avail. In the attached dump files, the last two crashes are from trying to start virtual machines, the most recent one is when I try to start a newly created vmcx, and the one before it is when I try to start/create the windows xp mode virtual machine. The errors are very consistent and happen every time at the exact same time. My setup:

Windows 7 Professional x64
i5-2500k CPU
ASROCK P67 Extreme4 with Bios v2.1
2x4GB RAM
c300 solid state 128MB OS drive
1TB samsung spinpoint data drive
ATI Radeon 4800 graphics card

I've never tried posting to a forum before, but I'm at my wit's end on this one and the people here seem to be quite knowledgeable and helpful. Any help on this would be greatly appreciated!
Shaun


These were caused by a memory exception. Please run these two tests to verify your memory and find which driver is causing the problem.
1-Memtest.

*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

RAM - Test with Memtest86+

2-Driver verifier






Quote:
I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.


Driver Verifier - Enable and Disable

http://www.sevenforums.com/bsod-help-support/191494-bsod-starting-windows-virtual-pc-machines-any-machine-always-bsod.html
Relevancy 21.93%

Hello,
As the thread shows im having lots and lots of little(and big) crashes.

Im attaching the SF log and any help will be appreciated

Many thanks,
Dimitris

A:BSOD-PC Freezes randomly-Driver Verifier BSOD's at User Log-On

Added a zip file with three minidumps as i forgot that ive changed the default location of systemroot/minidump to a different disk as im not using virtual memory on os disk

http://www.sevenforums.com/bsod-help-support/358075-bsod-pc-freezes-randomly-driver-verifier-bsods-user-log.html
Relevancy 21.93%

I have been getting a ton of bsods I have re installed video drivers, updated and reinstalled windows 8. Did countless hardware test(Video ram, check memory, Cpu test) all passed temperatures stay around 25-35 c.
Recently uninstalled all video drivers and re installed. The bsods sometimes go away for a week or two but come back. and sometimes when it bsods there is a static noise inside of the computer, and the blue screen becomes distorted
Ive attached the dump files, if someone could help me pinpoint the piece of hardware so I can ship it out for repair please.

A:Random BSOD 0x00000124 Hall.dll (Bsod is distorted/static

Hi irunebar12 & Welcome to the forums ^_^,

I have analysed your dump files and below has been provided an analysis of the same for informative purposes :-

Code:
Error : DCACHEL0_WR_ERR (Proc 7 Bank 1)
Status : 0xbf80000000000124
Address : 0x0000000101d80bc0
Misc. : 0x0000000000000086


The dumps are consistent with the error that there was a problem in writing to the L0 Cache of the CPU. That is a dead CPU and hence you are getting the errors even after a fresh install.
See if you are getting any errors in Prime95 according to the below (thanks usasma) -






Prime95 download site: GIMPS - Free Prime95 software downloads - PrimeNet
Prime95 Setup:
- extract the contents of the zip file to a location of your choice
- double click on the executable file
- select "Just stress testing"
- select the "Blend" test. If you've already run MemTest overnight please run the "Small FFTs" test instead. (run all 3 if you find a problem and note how long it takes to error out with each)
- "Number of torture test threads to run" should equal the number of CPU's times 2 (if you're using hyperthreading).
The easiest way to figure this out is to go to Task Manager...Performance tab - and see the number of boxes under CPU Usage History
Then run the test for 6 to 24 hours - or until you get errors (whichever comes first).
Monitor the CPU temperature and DON'T let it exceed 85?C. If it does, then you probably have a CPU cooling problem.
- CPU temps exceeding 60?C can cause errors in Prime95. Fix the cooling solution first, then run Prime95 again.
This won't necessarily crash the system - but check the output in the test window for errors.
The Test selection box and the stress.txt file describes what components that the program stresses.
NOTE: Errors should be considered when:
- the system BSOD's during Prime95
- the system freezes during Prime95 (this is different than the extreme slowness caused by the program using all your RAM and CPU)
- the Prime95 program crashes
- the Prime95 program shows errors in it's display
- there are errors in the Prime95 results file
More details on the use of this test: Torture test your CPU with Prime95



Also, perform the Intel Burn Test according to the below link -
IntelBurnTest - The new stress-testing program
Let me know how it goes ^_^

http://www.eightforums.com/bsod-crashes-debugging/59184-random-bsod-0x00000124-hall-dll-bsod-distorted-static.html
Relevancy 21.93%

Hello guys Problem started quite recently I bought a new computer a month ago and everything was cool until it started giving me MANY BSODs affter one intitial BSOD while playing League Of Legends After a first crash Windows asked during boot playing while BSOD reinstalling Win7 LoL, BSOD when avast!, affected if i want to run a recovery utility and each time I said yes it would BSOD at the end of the scan It would continuously crash until I ignored the recovery options and asked to start as normal This would give me a little bootloop consisting of two or three BSODs and then boot properly This whole thing BSOD while playing LoL, affected avast!, BSOD when reinstalling Win7 happened a few times around five I would say and today avast popped up saying it wouldn't run in background or something I tried resolving the issue but i would go back to a red error state instantly After uninstalling avast rebooting and trying to reinstall I had a nasty series of crashes in the middles of the installation and a huge bootloop with a blue screen each BSOD while playing LoL, affected avast!, BSOD when reinstalling Win7 time I decided to send BSOD while playing LoL, affected avast!, BSOD when reinstalling Win7 this all to hell and restore my computer to a restoration point which resulted in a long tedious procedure and an error message at the end At this point being pretty pissed ans wanting blood I decided to reinstall Windows Silly me I used the same CD exactly which worked when I just bought the PC and this time when I asked to boot from the CD i got a black screen for five minutes followed by a blue fatal error Tried many times each failed Right now i'm checking the hard drive with HD Tune and will run an overnight scan of RAM with memtest but i have a strong suspicion it's gonna give me another BSOD as soon as I try to boot from USB I am absolutely lost here If even reinstalling windows doesn't work what do I have to do I did not touch the BIOS in any way and first time I installed Windows with problems Help me please I am adding the dumps in attachement zip and can provide logs from WhoCrashed if needed Says something about ntfs sys aswndisflt sys which is an avast file and ntoskrnl exe

A:BSOD while playing LoL, affected avast!, BSOD when reinstalling Win7

Tenyoriu, I'll try to help with your problems. You have 3 dump files and from all of the errors I see, you seem to have some problems.

I am just going to show you a few of them. I could probably fill up the page with code, which I doubt means much to you. But, then I am going to give you a list of several things to do. I only ask that you read the instructions carefully and follow them. Hopefully we can get to the bottom of what the main issue is.

I know you said you uninstalled Avast, but it and the next one appear in every dump file.


Code:
aswNdisFlt T (no symbols)
Loaded symbol image file: aswNdisFlt.sys
Image path: \SystemRoot\system32\DRIVERS\aswNdisFlt.sys
Image name: aswNdisFlt.sys
Timestamp: Thu Nov 06 06:55:50 2014 (545B6FD6)
CheckSum: 0007AC90
ImageSize: 00070000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e
That is the Avast Firewall driver


Code:
fffff880`0338ba28 fffff880`045ce338*** WARNING: Unable to verify timestamp for cfosspeed6.sys
*** ERROR: Module load completed but symbols could not be loaded for cfosspeed6.sys
cfosspeed6+0x176338

Code:
cfosspeed6
start end module name
fffff880`04458000 fffff880`045f5000 cfosspeed6 T (no symbols)
Loaded symbol image file: cfosspeed6.sys
Image path: \SystemRoot\system32\DRIVERS\cfosspeed6.sys
Image name: cfosspeed6.sys
Timestamp: Mon Jul 04 08:18:51 2011 (4E11BDBB)
CheckSum: 0019A733
ImageSize: 0019D000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
That is CFoss, which you apparently have installed to speed up your internet. Please uninstall it.


Code:
LGSHidFilt
start end module name
fffff880`0740d000 fffff880`07422000 LGSHidFilt T (no symbols)
Loaded symbol image file: LGSHidFilt.Sys
Image path: \SystemRoot\system32\DRIVERS\LGSHidFilt.Sys
Image name: LGSHidFilt.Sys
Timestamp: Thu May 30 10:16:33 2013 (51A76D51)
CheckSum: 000169DA
ImageSize: 00015000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
That is your Logitech Gaming driver, please try to update it from Logitech's web site.


Code:
Rt64win7
start end module name
fffff880`04a00000 fffff880`04a8d000 Rt64win7 T (no symbols)
Loaded symbol image file: Rt64win7.sys
Image path: \SystemRoot\system32\DRIVERS\Rt64win7.sys
Image name: Rt64win7.sys
Timestamp: Tue Aug 23 08:55:41 2011 (4E53B15D)
CheckSum: 00097338
ImageSize: 0008D000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
That is your Realtek RTL8168D/8111D Family PCI-E Gigabit Ethernet NIC which is quite old and should be updated from your motherboard's web site.

I am concerned about the Avast quit working and then wouldn't install. That is one sign of a virus. So, whatever anti virus you have now, please do a complete scan.

Also download malwarebytes (Malwarebytes | Free Anti-Malware & Internet Security Software) please download the free vbersion, and uncheck the start real time protection and use it as an on demand AV scan. Run a full scan of all hard drives with it.

Also run these online virus scans

http://support.kaspersky.com/viruses...on/5350#block1
Anti-rootkit utility TDSSKiller
ESET online scanner:
Free Virus Scan | Online Virus Scanner from ESET
Free Online Virus Scanner | ESET

Next please run the short and long test with Seatools for DOS SeaTools for DOS and Windows - How to Use

And Check Disk Disk Check

Please also open an elevated command prompt ( click start, type cmd in the search box, right click on the cmd entry and select run as administrator) in the black box that opens, copy/paste sfc /scannow. If you decide to type it, notice the space between the sfc and the /. It is a system file checker which will scan your sys... Read more

http://www.sevenforums.com/bsod-help-support/359494-bsod-while-playing-lol-affected-avast-bsod-when-reinstalling-win7.html
Relevancy 21.5%

Not sure what is going wrong with my comp, i recently over clocked it and set it to 4.0GHz if that helps?

A:BSOD whilst playing Games, also sometimes just randomly BSOD

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033

Additional information about the problem:
BCCode: 124
BCP1: 0000000000000000
BCP2: FFFFFA800881A038
BCP3: 00000000BE000000
BCP4: 000000000100110A
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\011015-18454-01.dmp
C:\Users\Hayden\AppData\Local\Temp\WER-17960332-0.sysdata.xml

http://www.sevenforums.com/bsod-help-support/357932-bsod-whilst-playing-games-also-sometimes-just-randomly-bsod.html
Relevancy 21.5%

Okay the issue I've got isn't really the Blue Screen so much as it is everything that's happening before it.

I'll be using TeamViewer and running another program be it a game or a video and sometimes nothing at all and I'll get a Black Screen, sometimes if TeamViewer closes the screen will go back to normal, only my Webcam won't work like it was and it says it's in use by another Application, I've checked and updated all drivers, and I seem to be having this issue.

Appreciate any help.

And, How do I upload the Zip Folder?

A:BSOD - Black Screen couple minutes before BSOD

Here's the Folder.

http://www.sevenforums.com/bsod-help-support/265234-bsod-black-screen-couple-minutes-before-bsod.html
Relevancy 21.5%

I have tried updating windows and GPU drivers, checked temps and they seemed fine. It only happens during that one game and no other apps, surfing, or games. I tried messing with video and audio settings in game. No luck on anything. I saw some other threads where users posted the BSOD report and were helped greatly, so here it goes... (attachment included)

http://www.sevenforums.com/bsod-help-support/396359-bsod-only-when-playing-dota-bsod-report-included.html