Windows Support Forum

BSOD ON fresh windows install

Q: BSOD ON fresh windows install

Hi guys,

After some help troubleshooting this error if possible please. I did a brand new fresh install of windows on a system and have received the first BSOD after a few minutes of running the game "Archeage"

Dump file attached. Any clues would be greatly appreciated thanks.

Relevancy 100%
Preferred Solution: BSOD ON fresh windows install

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: BSOD ON fresh windows install

Hi Borgio.






Quote:
BugCheck 124, {0, fffffa80054b18f8, 0, 0}

Probably caused by : AuthenticAMD

Followup: MachineOwner
---------

2: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa80054b18f8, Address of the WHEA_ERROR_RECORD structure.
Arg3: 0000000000000000, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000000000000, Low order 32-bits of the MCi_STATUS value.

Dumping WHEA_ERROR_RECORD structure shows:
2: kd> !errrec fffffa80054b18f8
===============================================================================
Common Platform Error Record @ fffffa80054b18f8
-------------------------------------------------------------------------------
Record Id : 01cfde4cef27c727
Severity : Fatal (1)
Length : 928
Creator : Microsoft
Notify Type : Machine Check Exception
Timestamp : 10/2/2014 14:27:16 (UTC)
Flags : 0x00000002 PreviousError

===============================================================================
Section 0 : Processor Generic
-------------------------------------------------------------------------------
Descriptor @ fffffa80054b1978
Section @ fffffa80054b1a50
Offset : 344
Length : 192
Flags : 0x00000001 Primary
Severity : Fatal

Proc. Type : x86/x64
Instr. Set : x64
Error Type : BUS error
Operation : Generic
Flags : 0x00
Level : 3
CPU Version : 0x0000000000600f12
Processor ID : 0x0000000000000000

===============================================================================
Section 1 : x86/x64 Processor Specific
-------------------------------------------------------------------------------
Descriptor @ fffffa80054b19c0
Section @ fffffa80054b1b10
Offset : 536
Length : 128
Flags : 0x00000000
Severity : Fatal

Local APIC Id : 0x0000000000000000
CPU Id : 12 0f 60 00 00 08 06 00 - 0b 22 98 16 ff fb 8b 17
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00

Proc. Info 0 @ fffffa80054b1b10

===============================================================================
Section 2 : x86/x64 MCA
-------------------------------------------------------------------------------
Descriptor @ fffffa80054b1a08
Section @ fffffa80054b1b90
Offset : 664
Length : 264
Flags : 0x00000000
Severity : Fatal

Error : BUSLG_GENERIC_ERR_*_TIMEOUT_ERR (Proc 0 Bank 0)
Status : 0xb880000000020f0f


Error : BUSLG_GENERIC_ERR_*_TIMEOUT_ERR (Proc 0 Bank 0) - is detailed description of error. The 'Bank 0' wording implies memory hardware.

http://www.sevenforums.com/bsod-help-support/347502-bsod-fresh-windows-install.html
Relevancy 69.23%

Hi all,

I recently downgraded from Windows 10 due to constant BSOD's (was initially upgraded from windows 8.1).

I successfully performed a clean install this morning but have already encountered three BSODs,

I have a feeling that it might be my origin software but I'm not sure

Regards

Matt

A:BSOD - Fresh windows 8.1 install

Hi mattblue,

Welcome to the 8forums.

As you get a 0x1a(memory_management), 0xA(IRQL_NOT_LESS_OR_EQUAL) pointing to hardware and 0x139(KERNEL_SECURITY_CHECK_FAILURE) caused by GPU drivers, please run a few tests.



Diagnostic test

GPU TEST

Run Furmark to test your GPU. Furmark tutorial


   Note
Run Furmark for around 30 minutes

   Warning
Your GPU temperatures will rise quickly while Furmark is running. Keep a keen eye on them and abort the test if temperatures rise too high



Diagnostic Test

RAM TEST

Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 7 Forums


   Note


MemTest86+ needs to be run for at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.

http://www.eightforums.com/bsod-crashes-debugging/71445-bsod-fresh-windows-8-1-install.html
Relevancy 69.23%

Hi i'm french i will try my best to explain Sorry but i can't title more precisely due to the circumstance Actually I just reinstalled windows ultimate x hours ago format by the disc too and i had my first quot new quot bluescreen like mn after installed amd driver last one from happened just when i logged into steam Windows wasn't already setup to maintain the bsod screen at this point now its done Before maybe the new windows solve some but just in case it can maybe also help I reinstalled it cause i had random bluescreen with some sys or dll atikvmag which tend to be with the install windows new 7 again BSOD after fresh graphic card system corrupt some cleaner stuff said me i had a bitcoin stuff which can destroy some vital windows fonctions Sometimes i had bsod in the evening like no one doing the quot same thing quot youtube amp games for most not so much differents games i don't even remember having it while idle desktop or if i was idle there was something running youtube player for example Other quick example i used to crashed while having a lot of tabs with BSOD again after fresh new install windows 7 some youtube players yep i BSOD again after fresh new install windows 7 use a lot so BSOD again after fresh new install windows 7 after reboot chrome says me quot restore them quot i say quot do it baby quot which could result in a bsod I also can be freeze well i guess cause my usb stops no mouse keyboard i haven't check sound Or an application crashed i hit ctrl alt sup and all the time in this case it freeze the computer when i click on quot Task manager quot i can't access right clic in bottom in this situtation the explorer doesn't response to my actions I will post further bsod when they will come So here is my probably first zipfile

A:BSOD again after fresh new install windows 7

New one, i was starting a youtube video so my "Before" problems are still there

I missed i vital thing on my first zipfile, my windows 7 wasn't in sp1, trully sorry for that supid miss.. i though it was already done humm.

http://www.sevenforums.com/bsod-help-support/347653-bsod-again-after-fresh-new-install-windows-7-a.html
Relevancy 69.23%

? OS - Windows 7 Ultimate 64-Bit
? Original OS - Windows 7 Home Premium x64
? Purchased OS from retailer
? Age of System - 3 Years
? Age of OS installation - Reinstalled just 4 days ago

? CPU - i7-2630QM @ 2.00 GHz
? Video Card - nVidia GTX 460M
? MotherBoard - Asus G73SW Intel Laptop Motherboard s989 (0205A) 60-N3IMB1000-C08 69N0K9M10C08
? Power Supply - ASUS 19.5V 7.7A 150W POWER SUPPLY/ AC ADAPTER
? System Manufacturer - Asus

Happy New Years everyone! I hope everyone had a great year. I purchased this laptop I'm using (Asus G73SW) from a friend earlier this year and it has been more trouble than it's worth. Hopefully I followed all of the guidelines for the post. I included the PERFMON report, the BSOD Collection .html file, and a BlueScreenView document as well. Thanks for any help or suggestions you give me!

http://www.techsupportforum.com/forums/f299/bsod-after-fresh-install-of-windows-7-a-773170.html
Relevancy 69.23%

Hey guys,
I built my PC from all new parts about 3-4 months ago, but from the get go it would intermittently blue screen, it settled down a month or two later but not sure why. Two days ago I wiped and formatted my drive and did a clean install of 7 as I was having unrelated issues I couldn't resolve. But now the blue screens are back. I thought it might be mobo driver issues but I finished updating the drivers and it's still happening.
System specs:
Windows 7 Professional 64x
Gigabyte ga-870fxa-ud5
AMD Phenom x6
AMD Radeon HD6870 1gb
two 4g G-Skill Ripjaw f3-12800cl9d-8gbxl RAM

Attached is the minidump and health report.
Thanks for any help!

A:BSOD on fresh install Windows 7

> Your crash was related to AODDriver2.sys AMD OverDrive Service Driver from Advanced Micro Devices.
Remove > at least to test.

> Please run the update readiness tool and then update to SP-1

Ensure you install the correct 64 or 32 bit option for your system)
Download the System Update Readiness Tool (64bit)
Download the System Update Readiness Tool (32bit)

Now update to SP-1

Learn how to install Windows 7 Service Pack 1 (SP1)

> I suggest you download the free version of Malwarebytes.
Update it immediately.
Do a full system scan
Let us know the results at the end.

Malwarebytes : Download free malware, virus and spyware tools to get your computer back in shape!

http://www.sevenforums.com/bsod-help-support/214809-bsod-fresh-install-windows-7-a.html
Relevancy 69.23%

I have been getting a random BSOD on a fresh Windows 8 install. It doesn't seem to happen at any given time. Sometimes its right after startup and sometimes in the middle of the night when nothing is happening. I have attached my dumps if anyone can help read them. I have tried to look at them myself but I am getting a symbols error. I appreciate the help, Thanks!

A:Windows 8 BSOD after fresh install

Some of your mini-dumps are pointing towards the file: e1c63x64.sys which is your Intel(R) Gigabit Adapter NDIS 6.x driver file. Please update this to Windows 8 64bit version: Driver Reference Table

I have also found some out-of-date drivers that you should update or remove/un-install if un-needed:

AsUpIO.sys - ASUS hardware monitoring software related:http://www.carrona.org/drivers/search.php?id=AsUpIO.sys (please un-install all ASUS utilities via the control panel/un-install programs, known BSOD maker in Windows 8)
teamviewervpn.sys - TeamViewerVPN Network Adapter: Driver Reference Table (please un-install Teamviewer and re-install the latest version if you must use it)
vstor2-mntapi10-shared.sys - VMware Virtual Storage Volume Driver: Driver Reference Table (please un-intsall VMWare and install the latest version if you must use it)

Please update anything to Windows 8 64bit versions from your motherboard manufacturers website. This should include your Intel(R) Gigabit Ethernet Driver LAN driver. Your BIOS version is 3203 and the latest appears to be 3305, you might want to update as a last resort but please if you do follow manufacturers precautions as any error might render your system inoperable:

ASUSTeK Computer Inc. -Support- Drivers and Download P9X79 PRO

Please ensure you have downloaded all the Windows 8 updates until you can install no more.

-cheers

http://www.eightforums.com/bsod-crashes-debugging/18586-windows-8-bsod-after-fresh-install.html
Relevancy 69.23%

Decided finally to update my desktop from RTM to Ultimate. Everything was running kosher-like in RTM for the past 6 months, but installing the legit version has become a friggin' nightmare. After install, first time starting windows gives me a BSOD (can't even get past login). Safe mode, at least works...

First it was my newly installed HD 4650. Put back my ancient x800xl. Then it was some random NForce 4 drivers...now...no clue.

Specs:
NForce 4 Ultra (DFI LanParty)
Athlon 64 x2 3800+
ATI X800 XL

Attached is the dump file...

Thanks in advance for any help that can be provided.

A:Windows 7 x64 Fresh Install BSOD

  
Quote: Originally Posted by l1fe


Decided finally to update my desktop from RTM to Ultimate. Everything was running kosher-like in RTM for the past 6 months, but installing the legit version has become a friggin' nightmare. After install, first time starting windows gives me a BSOD (can't even get past login). Safe mode, at least works...

First it was my newly installed HD 4650. Put back my ancient x800xl. Then it was some random NForce 4 drivers...now...no clue.

Specs:
NForce 4 Ultra (DFI LanParty)
Athlon 64 x2 3800+
ATI X800 XL

Attached is the dump file...

Thanks in advance for any help that can be provided.



This one was caused by memory corruption.

To test y ouor memory download memtestx86 and run it for 5 passes. that will test your memory and tell you if you have a heat issue.

You might as well run a system file check
type cmd in search>right click and run as admin>SFC /SCANNOW

Let us know the results

Ken

Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\K\Desktop\022010-35906-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*d:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0xfffff800`02857000 PsLoadedModuleList = 0xfffff800`02a94e50
Debug session time: Sat Feb 20 14:51:55.640 2010 (GMT-5)
System Uptime: 0 days 0:03:22.406
Loading Kernel Symbols
...............................................................
................................................................
.........
Loading User Symbols
Loading unloaded module list
....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 50, {fffffb41d6ff062b, 0, fffff800028dcd3b, 7}
Could not read faulting driver name
Probably caused by : memory_corruption ( nt!MiAgeWorkingSet+41b )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced. This cannot be protected by try-except,
it must be protected by a Probe. Typically the address is just plain bad or it
is pointing at freed memory.
Arguments:
Arg1: fffffb41d6ff062b, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffff800028dcd3b, If non-zero, the instruction address which referenced the bad memory
address.
Arg4: 0000000000000007, (reserved)

Debugging Details:
------------------
Could not read faulting driver name

READ_ADDRESS: GetPointerFromAddress: unable to read from fffff80002aff0e0
fffffb41d6ff062b

FAULTING_IP:
nt!MiAgeWorkingSet+41b
fffff800`028dcd3b 410fb65f1b movzx ebx,byte ptr [r15+1Bh]

MM_INTERNAL_CODE: 7

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

BUGCHECK_STR: 0x50

PROCESS_NAME: LogonUI.exe

CURRENT_IRQL: 0

TRAP_FRAME: fffff880031167a0 -- (.trap 0xfffff880031167a0)
NOTE: The trap frame does not contain all regi... Read more

http://www.sevenforums.com/bsod-help-support/65196-windows-7-x64-fresh-install-bsod.html
Relevancy 69.23%

Hey so i recently less than a week ago upgraded my windows install from bit to bit so im on a fresh windows install and everything was working fine until i left my computer on overnight to do all the windows updates and came back to find it had restarted due to a bluescreen install windows Fresh - BSOD i figured it may be a one off and didnt do anything about it until it happened while i was using it just now So i downloaded BSOD - Fresh windows install BluescreenViewer and here is the first BSOD http puu sh bxKa de b af png This is the second one that happened while i was actually using the computer http puu sh bxNu bd fd fa png I searched on the internet for a while to see if i could figure out how to solve it myself and read that using windows verifier to find out which driver is apparently responsible can be useful so i ran that and here is what that found http puu sh bxRQ ec f png Any help would be appreciated as im not sure what to do on the right hand side each BSOD says it is caused by a different driver file and im not sure what program thing either of them are attached to or from nbsp

Relevancy 69.23%

I have been experiencing a BSOD on my fresh install of windows 7. I ran the upgrade adviser before upgrading and it said my hardware was 100% compatible. Here is the info:
-32bit windows 7 pro
-The original OS was XP home
-Retail version of 7 pro
-2.5 years since the date of purchase today at 6:05 PM
-I installed 7 a week ago
-It is a windows 7 and Ubuntu dual boot.

Here is the crash message text:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033

Additional information about the problem:
BCCode: a
BCP1: 10000000
BCP2: 00000002
BCP3: 00000001
BCP4: 81897400
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\090711-61791-01.dmp
C:\Users\Jack\AppData\Local\Temp\WER-78905-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

And .zip is attached.

A:BSOD Fresh install of windows 7 pro

I would test you ram and cpu:


Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Administrator\Downloads\BSOD stuff\Windows_NT6_BSOD_jcgriff2\090111-39343-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*F:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17514.x86fre.win7sp1_rtm.101119-1850
Machine Name:
Kernel base = 0x8184d000 PsLoadedModuleList = 0x81997850
Debug session time: Thu Sep 1 18:12:12.608 2011 (UTC - 6:00)
System Uptime: 0 days 0:01:58.201
Loading Kernel Symbols
...............................................................
................................................................
................
Loading User Symbols
Loading unloaded module list
......
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {10000000, 2, 1, 818c5400}

Probably caused by : hardware

Followup: MachineOwner
---------
*** Possible invalid call from 818eadc2 ( nt!MiInsertPageInFreeOrZeroedList+0x1e7 )
*** Expected target 818c53d0 ( nt!KeAcquireInStackQueuedSpinLockAtDpcLevel+0x0 )

1: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: 10000000, memory referenced
Arg2: 00000002, IRQL
Arg3: 00000001, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: 818c5400, address which referenced memory

Debugging Details:
------------------
WRITE_ADDRESS: GetPointerFromAddress: unable to read from 819b7718
Unable to read MiSystemVaType memory at 819971a0
10000000

CURRENT_IRQL: 2

FAULTING_IP:
nt!KeAcquireQueuedSpinLockAtDpcLevel+20
818c5400 8908 mov dword ptr [eax],ecx

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

BUGCHECK_STR: 0xA

PROCESS_NAME: explorer.exe

TRAP_FRAME: 903f1ef8 -- (.trap 0xffffffff903f1ef8)
ErrCode = 00000002
eax=10000000 ebx=0000030c ecx=903f1f8c edx=830f1d9d esi=82ad1644 edi=830f1d8c
eip=818c5400 esp=903f1f6c ebp=903f1f98 iopl=0 nv up ei ng nz na po nc
cs=0008 ss=0010 ds=0023 es=0023 fs=0030 gs=0000 efl=00010282
nt!KeAcquireQueuedSpinLockAtDpcLevel+0x20:
818c5400 8908 mov dword ptr [eax],ecx ds:0023:10000000=????????
Resetting default scope

LAST_CONTROL_TRANSFER: from 818eadc7 to 818c5400

POSSIBLE_INVALID_CONTROL_TRANSFER: from 818eadc2 to 818c53d0

STACK_TEXT:
903f1f68 818eadc7 82b3dc84 82ad1644 82ad164c nt!KeAcquireQueuedSpinLockAtDpcLevel+0x20
903f1f98 818e0644 82b3dc84 82ad1644 82ad164c nt!MiInsertPageInFreeOrZeroedList+0x1ec
903f1fd8 818f2728 00001b8b c07f00f0 00000057 nt!MiPfnShareCountI... Read more

http://www.sevenforums.com/bsod-help-support/185292-bsod-fresh-install-windows-7-pro.html
Relevancy 69.23%

Hello guys ive been having issues for quite a while now and windows install BSOD fresh after of ive been trying to solve this matter but so far ive only failed Ive ran memtest a and i BSOD after fresh install of windows found several million errors So i scanned through and ramslot to try to determine which ram was giving the errors this only resulted in of my ram had only error I found this weird so i thought it might be the DIMM thats corrupted So now i BSOD after fresh install of windows removed of my rams and i BSOD after fresh install of windows only run with which passed the test Still i get unexpected shutdowns aka BSOD Ive tried to remove my SSD and only use my HDD back and forth changing to IDE inside BIOS but with no good results at all Ive also tried to change my PSU to a different brand but all volts seems ok I also reinstalled windows with USB CD from HDD yeah you name it different versions etc i even tried to install Windows but with the same result This all actually just started out of the blue i have no clue how but i didnt install anything all of the sudden i started having connection problems which resulted in BSOD Specs Asus P X PRO LGA- Intel I- X ghz six core gb ram Corsair Vengeance mhz EVGA Geforce GTX gb ram W Cooler Master M Silent Pro PSU GB Crucial SSD TB HDD Samsung Im kind of clueless All kind of help will be appreciated Thank you Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode BCP FFFFF A C BCP BCP FFFFF D E BCP OS Version Service Pack Product Files that help describe the problem C Windows Minidump - - dmp C Users Computer AppData Local Temp WER- - sysdata xml Read our privacy statement online http go microsoft com fwlink li cid x If the online privacy statement is not available please read our privacy statement offline C Windows system en-US erofflps txt Files Download - - dmp from Sendspace com - send big files the easy way - gt - - dmp Download WER- - sysdata xml from Sendspace com - send big files the easy way - gt WER- - sysdata xml

A:BSOD after fresh install of windows

Run memtest from hcidesign along with your other programs.

http://www.sevenforums.com/bsod-help-support/266317-bsod-after-fresh-install-windows.html
Relevancy 69.23%

Hello everyone Windows BSoD after install 7 fresh New member to the forums here and I was able to be pretty ninja-like when it came to getting information required to make a post in this forum Bought a new computer weeks ago came in days ago Been having trouble with it since Usually I'm the quot Mr Fix-it quot when it comes to PC's but I've never messed around with any debugging tools so I need some assistance please any help is greatly appreciated I've tried all the troubleshooting you can possibly do when trying to diagnose a blue screen of death Tried both BSoD after fresh Windows 7 install RAM sticks separately took the video card out and used on-board video I even tried both RAM sticks with on-board video separately Unplugged the DVD-ROM no avail I called ASRock and got a technician who I could barely understand but was telling me something about quot XMP quot I didn't see the XMP option under the DRAM configuration even if my sticks don't support it wouldn't the option still be there I think he has my motherboard confused with another one He told me to either replace the RAM with new RAM or send the motherboard back in and exchange it I came here to see what the BSoD DMP files REALLY have to say the problem is so I can solve it once and for all I didn't pay for new hardware to let it sit here and collect dust I appreciate any help you guys can offer SPECS Nothing is OC'd except the GPU it was OC'd straight from the factory MOBO ASRock Z Extreme Gen P latest BIOS update CPU Intel Core i Sandy Bridge ghz RAM GSkill RIPJAWS x gb DDR GPU MSI GTX-TI Twin Frozr ii gb PSU Corsair TX W HDD TB Samsung SATAII gb sec DVD-ROM ASUS SATA DVD-ROM OS Windows Ultimate bit RETAIL

Relevancy 69.23%

I have had this computer about a month now and recently It blue screens sometimes when gaming sometimes doing nothing Problem signature Problem Event Name BlueScreen OS Version Locale ID Here is the message it gave me Extra information about the problem BCCode f BCP BCP FFFFFA F B BCP FFFFFA F E BCP FFFFF OS Version Service Pack Product Bucket ID X Before after BSOD fresh windows install and xF IOERR c e IMAGE hardware disk Server information c d - ac- b -b - efc a fe I don't know what is causing it Here is my system info CPU Manufacturer GenuineIntel Description Intel Family Model Stepping Name Intel R Core TM i - CPU GHz Speed Installed RAM MB PC Info PC or motherboard model To Be Filled By O E M System BSOD Before and after fresh windows install name RALGONDO-PC System Manufacturer To Be Filled By O E M Onboard devices Graphics Description AMD Radeon HD Name AMD Radeon HD RAM MB Driver Date - Driver Version CD DVD drives Description CD-ROM Drive Caption ATAPI iHAS C ATA Device Manufacturer Standard CD-ROM drives I recently changed my computer to create a dmp file upon it's next blue screen that I am anticipating It crashed again today Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode f BCP BCP FFFFFA DD E BCP FFFFFA DD CC BCP FFFFF OS Version Service Pack Product Files that help describe the problem C Windows Minidump - - dmp C Users Ralgondo AppData Local Temp WER- - sysdata xml Happened again for the love of god im desperate I TRIED REINSTALLING WINDOWS WITH THE DISK I WAS GIVEN Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode f BCP BCP FFFFFA A D BCP FFFFFA A D BCP FFFFF B OS Version Service Pack Product Files that help describe the problem C Windows Minidump - - dmp C Users Ralgondo AppData Local Temp WER- - sysdata xml

A:BSOD Before and after fresh windows install

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

If you are overclocking STOP

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.



To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

http://www.sevenforums.com/bsod-help-support/229312-bsod-before-after-fresh-windows-install.html
Relevancy 69.23%

I just got three 320GB Seagate drives setup in RAID 0 for Linux, and I decided to also reinstall Windows 8 on my SSD since it started lagging and running slower than normal. While trying to install Win8, right after selecting a disk/partition to install to, I got a BSOD about an error in a nonpaged area or something. When I tried to boot into the installer again, I got a BSOD immediately after the logo splashscreen (too quick to see what it was about). Does anyone know how to fix/bypass this?
-I'm booting the Windows 8 installer from a Corsair Survivor 64GB USB3.0 flashdrive. I'm gonna try a dvd with a different iso that I downloaded more recently on my laptop.

A:BSOD on Windows 8 fresh install

Try different media (CD/DVD or USB) and different ISO's
Try these free, bootable diagnostics: Initial Hardware Diagnostics

http://www.eightforums.com/bsod-crashes-debugging/32702-bsod-windows-8-fresh-install.html
Relevancy 69.23%

Hey,

Just wondering if anyone can help. Installed
I'm getting BSOD within a minute of startup of a fresh Windows 7 x64 Install.

I've tried changing RAM and a couple of other things.
I have as of yet not installed any programs, just updated my graphics card driver

I can boot into safe mode without a problem.
I can't see any hardware conflicts.

I am getting a IRQL_NOT_LESS_OR_EQUAL error on the BSOD.
I was also getting a Win32.sys error.

Any help would be greatly appreciated.

Attached are the 4 latest dump files.

Simon.

A:BSOD on fresh x64 Windows 7 Install

  
Quote: Originally Posted by nomis42


Hey,

Just wondering if anyone can help. Installed
I'm getting BSOD within a minute of startup of a fresh Windows 7 x64 Install.

I've tried changing RAM and a couple of other things.
I have as of yet not installed any programs, just updated my graphics card driver

I can boot into safe mode without a problem.
I can't see any hardware conflicts.

I am getting a IRQL_NOT_LESS_OR_EQUAL error on the BSOD.
I was also getting a Win32.sys error.

Any help would be greatly appreciated.

Attached are the 4 latest dump files.

Simon.




Simon

Hi and welcome

You have 3 distinct causes for these BSODs. First the directx portion of your video driver. The second is memory corruptoion, and the third are win 7 files

For the first I would completely remove the current driver and download a fresh copy. Install only the driver and not the rest of the things that usually get installed with them.

For memory corruption I would download memtestx86 burn it to a cd and run it for at least 5 passes.

For the win 7 files I would run a system file check
(type cmd in search>right click>sfc /scannow)

Let us know if you need more help

Ken


Code:
BugCheck D1, {fffff80001f02f50, 2, 8, fffff80001f02f50}
Probably caused by : dxgmms1.sys ( dxgmms1!VidSchiWaitForSchedulerEvents+1bc )
??????????????????????????????????????????????????????????????????????????????????????
BugCheck A, {a4400000000, 2, 0, fffff80002893317}
Probably caused by : win32k.sys ( win32k!SURFACE::Map+a1 )
??????????????????????????????????????????????????????????????????????????????????????
BugCheck A, {0, f, 0, fffff80002df6fde}
Probably caused by : pci.sys ( pci!PciReadSlotConfig+84 )
??????????????????????????????????????????????????????????????????????????????????????
BugCheck 4E, {99, 73a02, 0, 74282}
Probably caused by : memory_corruption ( nt!MiBadShareCount+4c )

http://www.sevenforums.com/bsod-help-support/85715-bsod-fresh-x64-windows-7-install.html
Relevancy 69.23%

I have had windows 7 installed now for 2 weeks i did have it installed before but i installed a new HDD as my main drive.

It has happened a few times now but i have only saved 2 dumps which are attached. I am currently using Windows 7 Pro 64bit which i got from the msdnaa through my University.


I don't really fancy reinstalling windows again but if i have to then i will but if there are work arounds that would be great!

The main errors are: ntoskrnl.exe, Wdf01000.sys, PSHED.dll

A:BSOD - After a fresh install of windows!

Welcome!

Let's go through our generic tips. If you're overclocking, stop. Disconnect all unnecessary hardware, like external USB drives, video cards, etc.

Try a memory test. Download Memtest86 and burn the ISO to a CD using ImgBurn. Boot from the CD, and run at least 5 passes.

Also, try scanning your system files. Open an elevated command prompt and run sfc /scannow.

Good luck!
~JK


Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Jonathan\Desktop\021110-19016-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0xfffff800`02a63000 PsLoadedModuleList = 0xfffff800`02ca0e50
Debug session time: Thu Feb 11 08:35:07.143 2010 (GMT-5)
System Uptime: 0 days 6:03:53.312
Loading Kernel Symbols
...............................................................
................................................................
.........................
Loading User Symbols
Loading unloaded module list
.......
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck D1, {2e, 2, 1, fffff88000e3b891}

Unable to load image \SystemRoot\system32\DRIVERS\LHidFilt.Sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for LHidFilt.Sys
*** ERROR: Module load completed but symbols could not be loaded for LHidFilt.Sys
Probably caused by : hardware ( LHidFilt+9131 )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arguments:
Arg1: 000000000000002e, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, value 0 = read operation, 1 = write operation
Arg4: fffff88000e3b891, address which referenced memory

Debugging Details:
------------------
WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff80002d0b0e0
000000000000002e

CURRENT_IRQL: 2

FAULTING_IP:
Wdf01000!FxRequest::GetMemoryObject+4a5
fffff880`00e3b891 01752d add dword ptr [rbp+2Dh],esi

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

BUGCHECK_STR: 0xD1

PROCESS_NAME: Wow.exe

TRAP_FRAME: fffff80000ba2520 -- (.trap 0xfffff80000ba2520)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=fffffa80057ce2b0 rbx=0000000000000000 rcx=fffffa80057e6650
rdx=0000000000000001 rsi=0000000000000000 rdi=0000000000000000
rip=fffff88000e3b891 rsp=fffff80000ba26b0 rbp=0000000000000001
r8=fffff80000ba2703 r9=0000000000000000 r10=fffffa800592dd30
r11=0000000000000002 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei pl nz na pe nc
Wdf01000!FxR... Read more

http://www.sevenforums.com/bsod-help-support/64110-bsod-after-fresh-install-windows.html
Relevancy 68.8%

Hi I Fresh fresh system Random install, - BSOD have installed a whole new windows pro x My new Random BSOD - Fresh install, fresh system mobo an ASus p e pro along with new ram pc gskill x ddr running in mhz due to my q Everythingi s running perfectly except some random BSOD total this week I have posted a pack of dump file in here the last ones are the ones that represent the BSOD I had and that I cannot explain the others ones are for various reasons crashes who happenned during installation but Random BSOD - Fresh install, fresh system that I was able to resolve What is weird is that my BSOD only happenned when I was surfing explorer on when the CPU was idle at night with utorrent running today mc pc got BSOD at AM after night or running perfectly it is open since then and running perfectly again All the afternoon for hours it loaded utorrent I cam back from the university and started to play empire total war and lot of MW multiplayer Everything is working perfectly no BSOD But I'm afraid to leave my pc open this night when the BSOD happen I usually have to reboot manually because if it reboot by itself it lead to a DOS screen saying to select a boot device Help me someone I cannot believe me G-skill memory are faulty otherwise they would have failed in-game I suspect nvidia drivers can be responsible for thoses bluescreen The power management tool is not working properly and whatever the option I choose in the nvidia panel it will sometimes lower my frequencies and sometimes it will keep the stock one A strange thing also is that my CPU is lowering it's speed in a kind of power saving option but I turned intel speedstep off so it should not do it should it IS there a problem running pc in mhz I do not want to maintain my FSB to north bridge to mhz all the time cause it heat my system a lot I use that function from time to time for hard gaming sessions crysis for example PLease help Thanks for your help already

A:Random BSOD - Fresh install, fresh system

I think I must also mention that BSOD didnt always give the same message, wich lead me to confusion in my troubleshooting research.

http://www.sevenforums.com/bsod-help-support/55675-random-bsod-fresh-install-fresh-system.html
Relevancy 68.8%

Dear All,
Old (but reliable) HP laptop. Had no problems.
Did a fresh Windows install. Now regret!
BSOD occurs during mundane tasks, like file copy, or browsing.
Tried the install with thoroughly updated drivers from HP Support. BSOD still occurs.
Then, installed Windows in a minimal "vanilla" state, using only MS Update provided drivers. BSOD.
Ran "Driver Verifier" for 24 hours. BSOD.
Suspect a driver at fault, but which one!?
With thanks for any guidance you can offer.
LanceK

HP2740p Convertible
Mainboard : HP 7007
Chipset : Intel QM57
Processor : Intel Core i5 540M @ 2533 MHz (max : 3220)
Physical Memory : 4096 MB DDR3-SDRAM
Video Card : Intel(R) HD Graphics
Hard Disk : INTEL SSDSA1M080G2HP ATA Device (80GB)
Network Card : Intel 82577LM Gigabit Network Connection
Network Card : Intel WiFi Link 6000 Series
Operating System : Windows 7 Professional Professional Media Center 6.01.7601 Service Pack 1 (64-bit)
DirectX : Version 11.00

A:Fresh Windows install, BSOD 0x000000c

You have:
MEMORY_MANAGEMENT (1a) A page table page has been corrupted - Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+35084 )
SPECIAL_POOL_DETECTED_MEMORY_CORRUPTION (c1) - Probably caused by : memory_corruption ( nt!MiCheckSpecialPoolSlop+83 )
I would recommend performing a memory test

http://www.sevenforums.com/bsod-help-support/346918-fresh-windows-install-bsod-0x000000c.html
Relevancy 68.8%

Edit: Issue solved as of Intel HD Graphics Driver 10.18.10.3345

I get a BSOD with message DRIVER_IRQL_NOT_LESS_OR_EQUAL (igdkmd64.sys) shortly after launching any game. The driver is linked to Intel's Integrated Graphics which I have updated with 'Windows 8.1 Ready' drivers. My laptop has a Nvidia dedicated GPU which is what I set games to run with, so I'm not sure why Intel's drivers are failing.

I read online that this BSOD can be related to memory issues and since using a fresh 8.1 install I have been receiving low memory error messages whilst playing games despite me having 16GB of RAM.

Thanks for your help.

A:Windows 8.1 BSOD Fresh Install - igdkmd64.sys

I have exactly the same thing happen. I discovered it whilst playing Dirt3 and Grid2. I get a message about the memory and then a little later the crash happens. I really hope someone can help otheriwise I am reinstalling version 8.0

http://www.eightforums.com/bsod-crashes-debugging/33876-windows-8-1-bsod-fresh-install-igdkmd64-sys.html
Relevancy 68.8%

Hello Folks,
This is a used Gateway FX6850 computer. Originally a windows 7 machine but had been upgraded to Win10 before I got it. I reset the PC when I got it (dumping EVERYTHING) and it crashed (I think...?) at 75% through the reset. It restarted automatically and it began to install windows 10 again I have had a BSOD nearly every time I have used the computer since. This was originally marketed as a gaming comp, but I haven't gamed on it and don't intend to. I'm just an internet user but my business is online sales. I have followed the instruction for posting here and here are the attached files and I hope you can help.
 

A:Multiple VARIOUS BSOD Windows 10 Fresh Install

I am having trouble understanding this portion of the instruction for posting here: SeaTools for DOS - Hard Drive (HDD) Diagnostics.
I don't know what this means:  In order to use the newest SeaTools for DOS, download the bootable CD image version to your desktop.
What or where is this "image" ???

http://www.bleepingcomputer.com/forums/t/615750/multiple-various-bsod-windows-10-fresh-install/
Relevancy 68.8%

Hey guys I've had my computer running flawlessly for a year now Recently I bought a external hard fresh BSOD and HELP install windows update! after drive for school computer repair class In class we installed windows and ubuntu as partitons BSOD after fresh install and windows update! HELP on the external hard drive I brought it home yesterday and unplugged the esata cord from my Primary SSD into my external hard drive with ubuntu on it and tried to boot from the external instead of my primary SSD I went into the bios also to make sure the computer was reading the new hard drive as the primary and was in priority The boot manager came up asking which version of Ubunto i would like to load this is all normal It started doing the postcheck I think this is what its called Its where the list of drivers are being collected before ubunto loads kind of like running windows in safemode and watching the devices load before windows boots up After the list of drivers were loaded my screen goes completly black and my monitor comes up saying no input signal I figured this was a driver problem as ubuntu was installed on my external hard drive using my school computer So I tried to restart the computer in windows again to get on the internet to troubleshoot I turned the computer off and plugged the esata cord into my SSD changed the bios settings back so that the SSD was primary and in priority then sure enough i get the error quot Please insert a boot device blah blah blah quot The error you get when no operating system is installed I fooled around with the bios a bit more and no matter what i did it couldnt read windows off my SSD I went back into the bios to make sure the computer was recognizing it and it was I used Hirens boot cd to load mini xp from the disk in order to access my SSD as a secondary drive to backup my files Everything worked the mini xp was able to open the SSD and i could transfer files no problem I reinstalled windows pro x back on the SSD Fresh Install including format and everything went smooth I started running windows updates and antivirus definitions at the same time Then all of a sudden as the windows updates were at around I got the blue screen of death It would wait till the dumping physical memory reached then restarted Ever since this it happens of the time i restart my computer Do you think its software related or should I send in my SSD for warranty Ive attached a file that shows my system status and everything please have a look System Manufacturer Model Number Self Built OS Windows Professional bit CPU Intel Core i - Bloomfield GHz LGA W Quad-Core Motherboard ASUS P TD Deluxe LGA Intel X ATX Intel Motherboard Memory CORSAIR XMS GB x GB DDR SDRAM DDR PC Graphics Cards x in SLI - GIGABYTE GV-N UD- I GeForce GTX MB -bit GDDR Sound Card N A Monitor s Displays x ASUS VW H Glossy Black quot ms GTG HDMI Widescreen LCD Screens Resolution N A Hard Drives Primary Intel X -M Mainstream SSDSA M G XXX quot GB SATA II MLC Internal Solid State Drive SSD - OEM Secondary Western Digital RE WD FBYS TB RPM SATA Gb s quot Internal Hard Drive -Bare Drive PSU CORSAIR HX Series CMPSU- HX W ATX V EPS V Case RAIDMAX SMILODON ATX- WB Black mm SECC Steel ATX Mid Cooling COOLER MASTER Intel Core i compatible V RR-UV -XBU -GP Keyboard N A Mouse Razar Mamba Internet Speed kb s shitty Other Info N A

A:BSOD after fresh install and windows update! HELP

Windows has recovered from an unexpected shutdown


problem details:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.48
Locale ID: 4105
Additional information about the problem:
BCCode: 1e
BCP1: 0000000000000000
BCP2: 0000000000000000
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1
Files that help describe the problem:
C:\Windows\Minidump\112510-19578-02.dmp
C:\Users\Cameron\AppData\Local\Temp\WER-22105-0.sysdata.xml
Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

http://www.sevenforums.com/bsod-help-support/127066-bsod-after-fresh-install-windows-update-help.html
Relevancy 68.8%

So I recently did a clean install of Windows 7 Pro 64bit on an old computer that was Windows XP. The old computer had occasionally had BSOD. The new install of Windows 7 was fine to begin with but now I have had various BSOD over the last week. The computer is completely updated and all device drivers are up to date with the 64bit versions. I have also run MS ram tester which didnt throw anything up however will run it again later to double check.

I have attached the minidump zip file as per the forum instructions. The specs of the system I have also filled out in my bio bit.

Help you be greatly appreciated.

Thanks

http://www.sevenforums.com/bsod-help-support/381025-various-bsod-fresh-install-windows-7-pro-64bit.html
Relevancy 68.8%

I've built a new system and after about a week of it operating it has decided to be a complete douche to me for some unknown reason Everything the fresh Update after (Windows be install may cause) even BSOD was okay until I installed the SSD so I was aware of anyway the computer belongs to my sister and she never told me when the system used to crash so it could have crashed before the SSD Anyways when I was made aware of the computer issue I checked the Event Viewer logs to see what was wrong and tehre was loads of Kernal Power issues So I could only assume that maybe the old PSU was not good enough for all the cool new hardware so I bought a new PSU although the problem still persisted I've had more chance to observe the system today and determine what is going on I've removed HDDs from the system and kept the SSD in I ran a health check of the SSD on my own system BSOD even after fresh install (Windows Update may be the cause) and it reported it to be perfectly fine Anyways reformatted the SSD and everything was going well after installation After BSOD even after fresh install (Windows Update may be the cause) give the OS a lovely updates it BSOD on me I read a log which suggested there was bad drivers so I just assumed the ethernet drivers I had to manually install were incorrect even though they worked fine before SSD upgrade So I went to a wireless connection for the time being did everything all over again and got the same result At this point I determine Windows Update must be giving me grief I installed security updates only at first and everything was going fine Then installed SP and after maybe the BSOD even after fresh install (Windows Update may be the cause) odd more updates after SP it is now doing the entire damn thing all over again with crashing If I load Windows Update and either search for updates or implement Framwork update it will BSOD if I leave the system idle for minutes after booting it will BSOD And it will do this no matter what I do So I am completely stumped and would hopefully like to find some help from anyone before I start to blame the hardware Also as a side note as I love Safe Mode it hasn't crashed at all in Safe Mode so it's obvious to me it must be something that loads with the OS I've attached the logs that you need hopefully

A:BSOD even after fresh install (Windows Update may be the cause)

Hello Mattster.

Scan the system for possible virus infection. It is needed, despite of it being a clean reinstall.
Anti-rootkit utility TDSSKiller
Windows Defender Offline
Roll back to your display driver to an earlier one.
Download and install Driver Fusion.
Reboot the computer in Advanced Boot Options, safe mode. Search Driver Fusion in your start menu, and remove all components of your Intel Graphics Driver.
Download an immediate older version form Intel Download Center and install it.
Install Service pack 1.

Code:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Learn how to install Windows 7 Service Pack 1 (SP1)
Service Pack Center - Microsoft Windows

Let us know the results. And, next time upload your MSINFO32.nfo file.
Click on the start button
Type "msinfo32" (without quotes) in the search bar of the start menu, click the resulting link. It will open the System Information window.
File>Save. In the "File Name" filed, put "MSINFO32" (without Quote), give the save location to desktop, and click the "save" button.
Give the time for processing, it will save a .nfo file on your desktop.
Zip it, and upload it following the instruction.

http://www.sevenforums.com/bsod-help-support/276361-bsod-even-after-fresh-install-windows-update-may-cause.html
Relevancy 68.8%

Hi So I upgraded my system Bought a new motherboard CPU CPU Cooler RAM PSU amp SSD Installed windows worked fine for the first week Now when I start my PC in the morning or from when I get in from work I install BSOD. 64bit Fresh and of now Windows 10 getting get a BSOD when the PC Boots first time When it restarts it loads windows fine without issues I've never had a BSOD happen while in the O S however did once have a funky issue where once it loaded my desktop it started to flicker as if Explorer exe was continuously restarting Fresh install of Windows 10 64bit and now getting BSOD. On this occasion I held the hard reset button in and once restarted was fine Not sure cause I am running Windows bit Intel Core i - K GHz Quad-Core Processor MSI Z -GAMING ATX LGA Motherboard Corsair Vengeance Pro GB x GB DDR - Memory GB ASUS GTX DIRECT CU watt Corsair PSU The only 'old' thing is my Fresh install of Windows 10 64bit and now getting BSOD. GFX Card which I bought in Any help much appreciated Regards RedArrow

A:Fresh install of Windows 10 64bit and now getting BSOD.

Hi RedArrow,

Welcome to the 10forums and I am sorry for the delay.

I've been a little busy past few days as you might notice when looking at other threads.

Please turn off fast startup and let me know how it goes
Fast Startup - Turn On or Off in Windows 10 - Windows 10 Forums

Code:
Event[1469]:
Log Name: System
Source: Microsoft-Windows-Kernel-Boot
Date: 2016-01-06T22:04:00.602
Event ID: 29
Task: N/A
Level: Error
Opcode: Info
Keyword: N/A
User: S-1-5-18
User Name: NT AUTHORITY\SYSTEM
Computer: DESKTOP-GVONE8G
Description:
Windows failed fast startup with error status 0xC0000001.
Please fill in your system specs in your 'My System Specs' for easier lookup for those that are trying to help Please follow this tutorial and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely.How to fill in your system specs:

http://www.tenforums.com/bsod-crashes-debugging/36486-fresh-install-windows-10-64bit-now-getting-bsod.html
Relevancy 68.8%

I just did a fresh install of windows hoping itll stop my bsods. But it didnt, i've gotten 2 bsods since I did the fresh install of windows.

Anyways today I was playing league of legends and I got a random BSOD (like always) and before the BSOD a screen popped up for about 1 second and said hardware malfunction, and then it went to the BSOD screen, i couldn't read what all it said because it wasn't up long. Anyways i'm thinking its a hardware issue since I just did a fresh install of windows.

Any help with be greatly appreciated!

http://www.sevenforums.com/bsod-help-support/380750-bsod-random-fresh-windows-install.html
Relevancy 68.8%

Here is my situation:

My old install of windows 7 pro was messed up due to a virus that Avaste failed to detect in time. At least, it did damage to my windows files beyond simple repair so I decided to install windows on a new partition of my drive.

I proceded to install windows 7 Pro. on my new partition and after installing most of the windows updates, It began randomly crashing. not frequently but every few hours of use or even inactivity.

Information:
? Windows 7 Professional ? 64 bit ? Original Os was Vista ? OS is retail or at least an upgrade ? Installed the new OS a few days ago (maybe three) ? AMD Phenom 9750 Quad-Core Processor 2.40 GHz ? EVGA e-GeForce 9800 GT Eco edition ? Motherboard Name ECS MCP61PM-HM (Nettle3) (HP I think) ? PSU is 350 watts and I'm guessing the Brand is HP?
My PC is the "HP Pavillion Elite m9400f Desktop PC" All that's different is the 9800gt that I installed.

A:BSOD randomly in fresh install of windows 7

Update your computer to SP1 - How to update to SP1

Run these tests and report back the results
1. Memtest86 - Run for 7-8 passes - RAM - RAM - Test with Memtest86+ - Windows 7 Forums
2. Prime95 - Run all three tests for 3-4 hours each or until fail - CPU - Stress Test with Prime95 - Windows 7 Forums


Code:
Event[191]:
Log Name: System
Source: Microsoft-Windows-Time-Service
Date: 2011-04-17T08:04:26.039
Event ID: 34
Task: N/A
Level: Error
Opcode: Info
Keyword: N/A
User: S-1-5-19
User Name: NT AUTHORITY\LOCAL SERVICE
Computer: Argent-PC
Description:
The time service has detected that the system time needs to be changed by 86408 seconds. The time service will not change the system time by more than 54000 seconds. Verify that your time and time zone are correct, and that the time source time.windows.com,0x9 (ntp.m|0x9|0.0.0.0:123->207.46.232.182:123) is working properly.
Just thought I'd point that out. Don't think it has to do with your crashes though.


...Summary of the dumps:

Code:

Built by: 7600.16695.amd64fre.win7_gdr.101026-1503
Debug session time: Mon Apr 18 09:42:12.090 2011 (UTC - 4:00)
System Uptime: 0 days 1:41:55.818
Probably caused by : memory_corruption ( nt!MiIdentifyPfn+23f )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0xA
PROCESS_NAME: svchost.exe
FAILURE_BUCKET_ID: X64_0xA_nt!MiIdentifyPfn+23f
BiosReleaseDate = 04/23/2008
SystemManufacturer = Hewlett-Packard
SystemProductName = D5468AT-ABA ALONPAV
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16695.amd64fre.win7_gdr.101026-1503
Debug session time: Sun Apr 17 07:59:09.394 2011 (UTC - 4:00)
System Uptime: 0 days 9:01:04.188
Probably caused by : memory_corruption ( nt!MiIdentifyPfn+23f )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0xA
PROCESS_NAME: svchost.exe
FAILURE_BUCKET_ID: X64_0xA_nt!MiIdentifyPfn+23f
BiosReleaseDate = 04/23/2008
SystemManufacturer = Hewlett-Packard
SystemProductName = D5468AT-ABA ALONPAV
??????????????????????????????????????????????????????????????????????????????????????``

Code:
start end module name
fffff880`04344000 fffff880`04382000 1394ohci 1394ohci.sys Mon Jul 13 20:07:12 2009 (4A5BCC30)
fffff880`00ef3000 fffff880`00f4a000 ACPI ACPI.sys Mon Jul 13 19:19:34 2009 (4A5BC106)
fffff880`03f6f000 fffff880`03ff9000 afd afd.sys Mon Jul 13 19:21:40 2009 (4A5BC184)
fffff880`10bdf000 fffff880`10bf5000 AgileVpn AgileVpn.sys Mon Jul 13 20:10:24 2009 (4A5BCCF0)
fffff880`042bd000 fffff880`042d2000 amdppm amdppm.sys Mon Jul 13 19:19:25 2009 (4A5BC0FD)
fffff880`010d4000 fffff880`010df000 amdxata amdxata.sys Tue May 19 13:56:59 2009 (4A12F2EB)
fffff880`050bc000 fffff880`050c5000 aswFsBlk aswFsBlk.SYS Wed Feb 23 09:54:56 2011 (4D651FC0)
fffff880`05082000 fffff880`050bc000 aswMonFlt aswMonFlt.sys Wed Feb 23 09:55:04 2011 (4D651FC8)
fffff880`03e00000 fffff880`03e0a000 aswRdr aswRdr.SYS Wed Feb 23 09:55:11 2011 (4D651FCF)
fffff880`03e2a000 fffff880`03eaa000 aswSnx aswSnx.SYS Wed Feb 23 09:56:59 2011 (4D65203B)
fffff880`0424c000 fffff880`04297000 aswSP aswSP.SYS Wed Feb 23 09:57:02 2011 (4D65203E)
fffff880`03f5f000 fffff880`03f6f000 aswTdi aswTdi.SYS Wed Feb 23 09:55:51 2011 (4D651FF7)
fffff880`06271000 fffff880`0627c000 asyncmac asyncmac.sys Mon Jul 13 20:10:13 2009 (4A5BCCE5)
fffff880`00e8d000 fffff880`00e96000 atapi atapi.sys Mon Jul 13 19:19:47 2009 (4A5BC113)
fffff880`00e96000 fffff880`00ec0000 ataport ataport.SYS Mon Jul 13 19:19:52 2009 (4A5BC118)
fffff880`03eb3000 fffff880`03eba000 Beep Beep.SYS Mon Jul 13 20:00:13 2009 (4A5BCA8D)
fffff880`041ef000 fffff880`04200000 blbdrive blbdrive.sys Mon Jul 13 19:35:59 2009 (4A5BC4DF)
fffff880`05add000 fffff880`05afb000 bowser bowser.sys Wed Feb 23 00:15:06 2011 (4D6497DA)
fffff960`00750000 ff... Read more

http://www.techsupportforum.com/forums/f299/bsod-randomly-in-fresh-install-of-windows-7-a-567248.html
Relevancy 68.8%

I built a computer about a year ago and its run fine until about a month ago when my displays BSOD Windows Before Fresh Install After ntoskrnl.exe and started shutting off and not coming back on The only way I could get my displays to come back on would be to disconnect both monitors and only plug in the monitor that connects with DVI Connecting the second monitor would cause both to cut out and sometimes BSOD It seems ntoskrnl.exe BSOD Before and After Fresh Windows Install the same ntoskrnl.exe BSOD Before and After Fresh Windows Install thing was happening with the on-board video I finally decided to do a fresh Windows install and see if the problem persisted As soon as the I got up and running again I got a BSOD before installing any drivers I then did the following tests - Ran memtest for passes no errors - Tried my GPU on a different PCI-E slot Still BSOD - Tried unplugging the power from the GPU Still connected to the PCI-E slot still BSOD I was thinking of trying with the video card out completely but it seems the crash is random and I can't reproduce it Any ideas

A:ntoskrnl.exe BSOD Before and After Fresh Windows Install

I noticed that you don't have Secure Boot and/or UEFI enabled. If you were having problems with it and changed it, please let us know.





It's not necessary to enable it now. But, should you reinstall Windows at some point in the future, please enable it first.

I mention this because it may happen that (one day) the system won't boot. This can be caused by a program changing your UEFI settings, or an update of the UEFI resetting it to default values.

To test and see if this is the cause, boot into the UEFI and see if the settings have been changed. If uncertain, try with Secure Boot both on and off (and the UEFI on UEFI or Legacy (CSM))

If it still doesn't boot after trying this, then move on to other troubleshooting tools as it's not likely to be due to this.



I have seen problems with the Killer Network Manager - but mostly on MSI systems. I'd suggest checking out the following:
[QUOTE]At times the Killer Network Manager may cause BSOD prolems:
NOTE: See this link first: BSOD while playing on msi gt70 dragon edition 2 (thanks to kaelaan) It appears that the Killer Service problem was solved with the latest release of the Qualcomm versions of the drivers (so try updating to a version dated from later in 2014).[quote]
The Qualcomm Atheros Killer Service/KillerNetManager is known to cause BSOD's. Please follow the workaround instructions here:





First, open the Run dialog (Win + R keys) and type in "services.msc" (without the quotes) and press Enter
Scroll down and locate the "Qualcomm Atheros Killer Service" and right click on it. Select "Stop"
Right click on it again and this time select "Properties"
In the dropdown box for "Startup type", select "Disabled", then click on the "OK" button at the bottom of the window

Next, open Task Manager (right click on TaskBar and select "Task Manager")
Click on the "More details" dropdown (if present)
Click on the "Startup" tab
Scroll down and locate the "KillerNetManager" entry, right click on it and select "Disable"
There may also be an Install Shield (with the Killer gaming K next to it), if so Right click on it and select "Disable"
Finally, restart the system in order for the changes to take affect.



At times the Killer Network Manager will continue to load. If so, it's usually listed in the MSINFO32...Software Environment...Startup Programs section. If it is, please try this:





It may be that the instructions aren't stopping everything.
In some cases, there's a program running out of the Program Files/Program Files (x86) directory.
"c:\program files\qualcomm atheros\killer network manager\killer~1.exe" (NOTE: killer~1.exe is most likely killernetmanager.exe)
In other cases, there's a program running out of c:\windows\installer\{Long string of letters, numbers, and dashes}\networkmanager.exe_130c27d738f34c89bddf21bcfd74b56d.exe (the long string of letters and numbers may change)

Here's some things to try
1) Please see if there are any entries in the Startup tab of Task Manager that are related to Qualcomm/Atheros/Killer Network Manager (and NOT the card itself) and disable them (please let us know what you find) Be careful as the wrong selection can disable the network card.
2) Check in "msconfig" for any entries that aren't in the Startup tab of Task Manager. Let us know if you find any Qualcomm/Atheros/Killer entries there (we'll disable them differently if they are there).
3) Locate the "c:\program files\qualcomm atheros\killer network manager\killer~1.exe" and rename the .exe to .BAD (the killer~1 is actually a filename that starts with killer and ends with .exe) There will be an error in event viewer, but it'll stop the bugger from loading.
4) Locate the "c:\windows\installer\{Long string of letters, numbers, and... Read more

http://www.eightforums.com/bsod-crashes-debugging/45925-ntoskrnl-exe-bsod-before-after-fresh-windows-install.html
Relevancy 68.8%

Hi everyone... i get BSOD at new instal windows 7 pro x86 ..., no new driver and program already install yet. please help .

A:BSOD on fresh install windows 7 profesional x86

Code:
Host Name: NANA-PC
OS Name: Microsoft Windows 7 Professional
OS Version: 6.1.7600 N/A Build 7600
OS Manufacturer: Microsoft Corporation
OS Configuration: Standalone Workstation
OS Build Type: Multiprocessor Free
Registered Owner: NANA
First thing to do is update Windows fully - troubleshooting BSOD's on an outdated system is a waste of time and effort.

http://www.sevenforums.com/bsod-help-support/365706-bsod-fresh-install-windows-7-profesional-x86.html
Relevancy 68.8%

I've had this computer for about a year and a half now and it has always just randomly BSOD'ed. I recently tried going into command prompt and running "chkdsk /r" and that didn't seem to work. Even after I re-installed W7 (ultimate x64) about 3 months ago, it didn't seem to help anything. It rarely does it (twice a month), so it's very hard to take out my WiFi card to see if that might be causing it. All drivers are up to date. I ran a program called BlueScreen View and I uploaded a screen shot of it, I don't really understand what it's saying.

System Specs:
Windows 7 Ultimate x64
16 GB Crucial Ballistix Sport
1x Kingston 120GB SSD Now 200V+
2x WD Green 500GB (Raid 1, Software controlled)
AMD A8-3850
Biostar TA75M Motherboard
500W Allied PSU
Rosewill b/g/n WiFi adapter (PCI-e x1)

A:Windows 7 Fresh Install, random BSOD

Hello NKTechGuy,

Please read the instructions here: Blue Screen of Death (BSOD) Posting Instructions, and post back with the needed information. One of our BSOD experts should be by later when able to further help.

http://www.sevenforums.com/bsod-help-support/323046-windows-7-fresh-install-random-bsod.html
Relevancy 68.8%

Several months ago I put windows on my custom desktop and really enjoyed it As of a few weeks ago I started getting random bluescreens They became more and more frequent with wildly ranging error codes Unable to pin down a particular cause I wrote hardware 8.1 Windows Fresh - - BSOD Likely install of it off as random issues with windows With the latest build build my computer has been a nightmare I've seen every bsod under the sun WHEA uncorrectable error IRQL not less or equal critical process died driver manager io violation unexpected kernel mode trap kernel security check failure and I decided enough Fresh install of Windows 8.1 - BSOD - Likely hardware was enough I reset the bios to default settings disabled overclock I reseated all power connections cleaned out all the dust and wiped my boot drives With a fresh install of windows all seemed to be going well Until Fresh install of Windows 8.1 - BSOD - Likely hardware just hours after fresh install I'm watching a movie with my wife and bam WHEA UNCORRECTABLE ERROR Just had a second one while typing this Today is not a good day Computer build mostly in Asus z Sabertooth BIOS latest Intel i k Corsair h i Seasonic SS- KM watt x GB OCZ Vertex in RAID x G SKILL Ripjaw X gb DDR EVGA GTX Classified Currently in default bios no OC sfc scannow no integrity violations chkdsk no bad sectors CrystalDiskInfo reports both drives in good health Memory Diagnostic test - no errors I'll probably pull the graphics card tonight but it seems to be either pointing to my power supply my drive array or something equally as random I tend to doubt it is the psu as the problem doesn't seem to come up while gaming or cpu heavy tasks - highest draw If anything it is less frequent no data to back that up though Any help would be greatly appreciated I use my desktop for work and these issues are really killing my productivity Thank you DESKTOP -Fri zip

A:Fresh install of Windows 8.1 - BSOD - Likely hardware

Got a new bsod That I had never seen before today. PAGE_FAULT_IN_NONPAGED_AREA (win32k.sys)

Might remove 2 sticks of RAM just to see if that helps things.

DESKTOP8-Sat_06_27_2015_103414_94.zip

http://www.eightforums.com/bsod-crashes-debugging/67839-fresh-install-windows-8-1-bsod-likely-hardware.html
Relevancy 68.8%

One year old system i k P P Pro Asus board with GB Corsair RAM and XFX No other add on cards hard drives Ever since originally building the system last January it has had BSOD when playing games only Any game sometimes will not crash for a while ie weeks other times repeatedly within hours Very random But only with games Not enough of a pain to really care that much Did a fresh install of Windows and hoped that would solve to BSOD Help. Windows fresh of install over carried 7. my problem Installed and updated drivers from Asus site for my motherboard new drivers for anything I could think of No errors in device manager Ran memtest overnight with BSOD carried over to fresh install of Windows 7. Help. no problems Prime run for hours CPU going to BSOD carried over to fresh install of Windows 7. Help. C max CPU idles at C GPU generally runs at C while playing grahpically intense games Idles at C Big case lots of fans tons of airflow THe common demoniator may be the ASUS AI Suite II and Steam All other programs on this install I've not used before Switched to MSE etc Only installed a new game not previously used which led to the recent BSOD after fresh install At this point I m a bit stumped Uploaded dump file as per instructions in top post Any help would be appreciated My guess is that since it is BSOD carried over to fresh install of Windows 7. Help. only happening in games that it is probably the video card although I have no clue really edit Fresh install was done yesterday May th

A:BSOD carried over to fresh install of Windows 7. Help.

On a side note Windows 7 is installed on a SSD, don't know if that matters or not.

http://www.sevenforums.com/bsod-help-support/228430-bsod-carried-over-fresh-install-windows-7-help.html
Relevancy 68.8%

Some background I accidentally wiped my hard drive over the weekend thankfully I backed most of my homework up I had been experiencing startup issues and was playing around with the hard drive configurations I know what went wrong - I was every install of BSOD on startup 7 Windows with fresh trying to put my SSD back into RAID mode and it accidentally put my main drive into RAID mode When I reverted my main drive back to non-RAID mode it was wiped So I had re-installed Windows and am still having BSOD on every startup with fresh install of Windows 7 problems My computer has been getting multiples errors when I attempt to start it they have all been different each time next time it happens I will write it down Sometimes it's a Blue Screen of Death sometimes a Black Screen of Death Startup repair BSOD on every startup with fresh install of Windows 7 usually can't fix the problem but when I restart the computer and tell it to start Windows normally it usually works I tried using SFC and it told me quot Windows Resource Protection found corrupt files but was unable to fix some of them quot CBS log dump files and system health report are attached System specs are What is the age of system hardware - A few months What is the age of OS installation have you re-installed the OS -This installation is only a few days old OS Windows Home Premium bit OEM CPU Intel i k Sandy Bridge Motherboard GIGABYTE GA-Z BSOD on every startup with fresh install of Windows 7 XP-UD R Memory GB x G SKILL F - CL D- GBXL Graphics Card s ATI Radeon HD Monitor s Displays '' ASUS VE H RT Screen Resolution x Hard Drives TB SAMSUNG HD SJ PSU Corsair CMPSU- AX W RT

A:BSOD on every startup with fresh install of Windows 7

Did you run sfc /scannow three times at least?

Was the OS a clean install?

Did you do anything to the winSxS folder?

http://www.sevenforums.com/bsod-help-support/212919-bsod-every-startup-fresh-install-windows-7-a.html
Relevancy 68.8%

Hey guys I have been having a problem with blue screens on this computer for a few weeks now I finally got frustrated with it yesterday and reinstalled windows The issues would happen any time I ran windows update To fix it I would have to restore to the oldest possible point run the system repair utility off the windows disc and then reset the master boot record Yesterday not even that worked so I figured I could just do a fresh install but it's still happening I ran your guys's diagnostic tool and have attached the zip file below Thank you in advance for any help or insight you can offer and even if there's no solution thank's for having this awesome community out there for people edit Just thought I should add I'm running ntoskrnl.exe install BSOD fresh windows 7 in safemode with networking enabled right now and there's no problems The BSOD ntoskrnl.exe fresh windows 7 install blue screen happens after the windows loading screen just before the log-on screen

A:BSOD ntoskrnl.exe fresh windows 7 install

Welcome aboard.

Code:
Name [00000007] Broadcom NetLink (TM) Gigabit Ethernet
Driver c:\windows\system32\drivers\k57nd60a.sys (12.4.0.3, 313.54 KB (321,064 bytes), 10/16/2009 3:32 AM)
Can you update this driver?
Ethernet NIC Driver Downloads | Broadcom
Is there any updates available for it? If so, download and install it.

Install Service pack 1.
Learn how to install Windows 7 Service Pack 1 (SP1)
Service Pack Center - Microsoft Windows

Let us know the results.

http://www.sevenforums.com/bsod-help-support/264966-bsod-ntoskrnl-exe-fresh-windows-7-install.html
Relevancy 68.8%

Hello everyone. Some background: I wanted to redo a fresh install of Windows 7 onto a Samsung 850 EVO SSD. After using DISKPART to set up the SSD the installation went flawlessly. Of note, I have the Users folder on a separate Toshiba 1TB HDD using Audit Mode instructions I found here. I installed my monitor drivers, mobo drivers, wifi adapter, webcam, HP printer drivers and Google Chrome.

I then proceeded to do the Windows Update. It updated to SP1 fine. I continued Windows Update and it was in the process of installing more critical updates when my BSOD occurred. The necessary files are attached. Thanks for taking time to review my case.

A:BSOD during Windows Update after fresh SSD install

So I just experienced a second BSOD, also while performing Windows Update. Latest log files are attached. I've also been experiencing errors with some Windows Update files.

http://www.sevenforums.com/bsod-help-support/397375-bsod-during-windows-update-after-fresh-ssd-install.html
Relevancy 68.8%

Hello,

I have just formatted my desktop pc and installed windows 7 from scratch.

For 2 weeks now, everything was running fine (no issues or BSODs).

However, today I got a dump of windows 7 twice.

I have run the analysis from dm log collector.

The results are found in the attached file.

Any help will be appreciated.

Thank you.

--- Update ---

Second/Third dump has just occurred. Uploading the updated files.

A:BSOD after fresh install of windows 7 x54 (IRQ_NOT_LESS_OR_EQUAL)

I did analysis and said 'probably caused by ntfs.sys' BAD_POOL_CALLER.

I would test your hard drive with mini tools partition wizard (do surface test) Or are you using SSD? And always run Ram test after blue screens. Use memtest86

http://www.sevenforums.com/bsod-help-support/388210-bsod-after-fresh-install-windows-7-x54-irq_not_less_or_equal.html
Relevancy 68.8%

Hi guys I have some problem with my new computer I just installed windows and afterwards install all the drivers that coming with it Then when I start using windows update I get lots of bsod often Now the update proses is complete but I still getting the bsod often Is there any solution for this I also include the minidumps all Thank you This is the message that I get after startup Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode b BCP C BCP FFFFF D D BCP FFFFF E E BCP OS Version Service Pack Product BSOD 7 fresh after x64 Windows Ultimate install Files that help describe the problem C Windows Minidump - - dmp C Users Ciel Kamui AppData Local Temp WER- - sysdata xml Read our privacy statement online http go microsoft com fwlink linkid amp clcid x If the online privacy statement is not available please read our privacy statement offline C Windows system en-US erofflps txt nbsp

A:BSOD after fresh install Windows 7 Ultimate x64

SYSTEM_SERVICE_EXCEPTION caused by the gdrv.sys

This is some sort of Gigabyte program. Gigabyte's Dynamic Energy Saver Advanced program... Does it sound familiar?
 

http://www.techspot.com/community/topics/bsod-after-fresh-install-windows-7-ultimate-x64.180014/
Relevancy 68.8%
Relevancy 68.8%

Just reinstalled Windows on a new Samsung PM 830 SSD. Can't tell if its the SSD or the other things that I have installed. Sometimes it gives the BSOD screen, sometimes Explorer just goes missing and Task Manager would be unavailable.

These days the BSODs come more often and with little warning.

Dump file link
Attachment 199257

A:Random BSOD after fresh install of Windows 7 on a SSD.

Welcome to Seven Forums.

Please follow the Blue Screen of Death (BSOD) Posting Instructions
When posting a new crash dump, include all System File Collection and health reports. They contain valuable information that we can use to find the cause of the crashes.

http://www.sevenforums.com/bsod-help-support/215225-random-bsod-after-fresh-install-windows-7-ssd.html
Relevancy 68.8%

Hello Windows BSOD Install. Still BUGCODE_USB_DRIVER Fresh I am experiencing a BSOD and here is what I have done After fixing drivers and Fresh Windows Install. Still BSOD BUGCODE_USB_DRIVER reinstalling ISOTAP driver it seemed to BSOD again So at the point I completely nuked both partitions on my disc and did a fresh install of Windows I then went to the Asus web site and downloaded and installed all drivers this computer originally came with restarted of course ran windows update restarted installed one program World of Warcraft About minutes into playing my computer starts to make the disconnect reconnect sound for USB devices The only device plugged in was my mouse This is the same mouse currently plugged into my other computer with no issues I currently have the computer in safemode and I am running BSOD viewer from nirsoft net and this is the information that I have Dump File - - dmp Crash Time PM Bug Check String BUGCODE USB DRIVER Bug Check Code x fe Parameter Parameter Parameter Parameter fffffa be eb Caused By Driver usbhub sys Caused By Address usbhub sys a c File Description Default Hub Driver for USB Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win rtm - Processor x Crash Address ntoskrnl exe ec Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File Time AM Trying to attach the dump file as well if that helps Any assistance would be much appriciated

A:Fresh Windows Install. Still BSOD BUGCODE_USB_DRIVER

Code:
BugCheck FE, {8, 6, 5, fffffa800be4eb20}
Caused by any third party USB device driver which is not detected by the crash dump, because the device uses private symbols.

A stray crash dump is not enough. Click on button below ....

It will download the DM log collector. Right click on the application and run as administrator. It will generate a .zip file on your desktop. Upload the .zip.
Screenshots and Files - Upload and Post in Seven Forums

Also Upload the list of all the third party drivers Using NirSoft DriverView :
Download and execute Driverview
View > Hide Microsoft Drivers
Edit > Select all
File > Save Selected Items
In the Save dialog, Set the path to desktop, Put "Driverview" in the name field, and save.
Zip the .txt file and upload it.
Attach the information with your reply post.

http://www.sevenforums.com/bsod-help-support/362527-fresh-windows-install-still-bsod-bugcode_usb_driver.html
Relevancy 68.8%

I ran into some computer trouble a couple of months ago. I was having random shut downs and a constant loop of power on for two seconds and power off. Even when it would fully post, the computer would crash after a few minutes. I have RMAed every part in my computer so far, but I am still getting BSOD crashes. This has become very frustrating. I have attached the logs

A:BSOD every time after fresh install of windows 7

Blue screens of Death are probably caused by faulty drivers.

Just to make clear you RMAed literally every piece of hardware?What are your specs?Maybe some components "don't like" each other.

Have you tried any other OS than Windows 7?Maybe drivers that come with Windows 7 cause BSOD because they aren't best link between your hardware and software.

http://www.sevenforums.com/bsod-help-support/378346-bsod-every-time-after-fresh-install-windows-7-a.html
Relevancy 68.8%

st I'd like to say hello to all I just joined the forum And now to the before Windows install game after BSOD & during fresh problem I have been playing games lately and have had BSODs on the same game before and after fresh Windows installation Before BSOD's BSOD before & after fresh Windows install during game the game kept crashing occasionally with multiple NvStreamSvc errors in Windows event alert log during the fall and current moment After I got my st BSOD I installed fresh Windows in because I believed it was caused my some sort of driver problem Game crashed again and I did few quot fixes quot I set all power savings from Windows and Geforce management off and put bar from Quality to Performance from 'Geforce control panel' Then I set quot NVIDIA Streamer service quot from automatic to manual After these procedures I got to play the game without crashes for about days which earlier was about min per crash Until tonight I got BSOD again This custom PC is fairly new got it in the summer System specs are in specs menu I ran memtest for memories over night and got errors for them about pass if I recall right I installed Windows diagnostics tool and got something out of crashdumps Game is called War Thunder and that's the aces exe in PROCESS NAME parameter which was running when BSOD struck Here's a part where symbols are loaded kd gt analyze -v Bugcheck Analysis WHEA UNCORRECTABLE ERROR A fatal hardware error has occurred Parameter identifies the type of error source that reported the error Parameter holds the address of the WHEA ERROR RECORD structure that describes the error conditon Arguments Arg Machine Check Exception Arg fffffa c Address of the WHEA ERROR RECORD structure Arg be High order -bits of the MCi STATUS value Arg a Low order -bits of the MCi STATUS value Debugging Details ------------------ BUGCHECK STR x GenuineIntel CUSTOMER CRASH COUNT DEFAULT BUCKET ID WIN DRIVER FAULT PROCESS NAME aces exe CURRENT IRQL f STACK TEXT fffff ba a fffff a a b fffffa c be nt KeBugCheckEx fffff ba aa fffff be fffffa fbb fffffa fbb c hal HalBugCheckSystem x e fffff ba ae fffff a fffffa fbb fffff ba e fffff ba e nt WheaReportHwError x fffff ba b fffff a fffffa fbb fffff ba e fffffa fbb hal HalpMcaReportError x c fffff ba c fffff a ff d fffff ba ef hal HalpMceHandler x e fffff ba cd fffff a e dab hal HalpMceHandlerWithRendezvous x fffff ba d fffff acb ac hal HalHandleMcheck x fffff ba d fffff acb nt KxMcheckAbort x c fffff ba e afdb b nt KiMcheckAbort x f ed c x afdb b STACK COMMAND kb FOLLOWUP NAME MachineOwner MODULE NAME GenuineIntel IMAGE NAME GenuineIntel DEBUG FLR IMAGE TIMESTAMP FAILURE BUCKET ID X x GenuineIntel PROCESSOR CACHE BUCKET ID X x GenuineIntel PROCESSOR CACHE Followup MachineOwner -------------------------------------------------------- So the main question I have is that could this be related to my graphics card nvstreamsvc in earlier windows log CPU Genuine Intel or is this just related to the game aces exe I got then crashes also on other game but no BSODs yet from it I've been looking the game forums but haven't seen this problem with anyone else

A:BSOD before & after fresh Windows install during game

Welcome to SF trigsu .






Quote:
A "stop 0x124" is fundamentally different to many other types of bluescreens because it stems from a hardware complaint. Stop 0x124 minidumps contain very little practical information, and it is therefore necessary to approach the problem as a case of hardware in an unknown state of distress. - H2SO4


The generic nature of the 0x124 (Arg1=0) stop code means we would have to take
the trail & error approach.

The single dump file uploaded is a generic L2 Cache error, I would like to have some more if possible.
I see you have CCleaner installed, please stop using it for the remainder of our troubleshooting
efforts as is deletes the dump files which we need.

Code:
Error Type : Cache error
Operation : Generic

===============================================================================
Section 2 : x86/x64 MCA
-------------------------------------------------------------------------------
Descriptor @ fffffa800906c138
Section @ fffffa800906c2c0
Offset : 664
Length : 264
Flags : 0x00000000
Severity : Fatal

Error : GCACHEL2_ERR_ERR (Proc 0 Bank 7)
Status : 0xbe0000000100110a
Address : 0x00000001178da700
Misc. : 0x000000d080000086
What is the make, model and age of your PSU?
Fill out this form and post back the result:
Power Supply Calculator
Good practice, open up the case and re-seat all types of connection.
SATA Cables (HDD/SSD/ODD).
SATA-Power.
Motherboard 24-pin.
Motherboard 4/8-pin (CPU).
Re-seat the RAM.
Re-seat the GPU.
Make sure that every slot / cable head is free of dust or other obstruction.
Make sure that every connection is seating properly and firmly in-place.


Test for thermals and stability:
Download HWinfo and post a Screenshot of the sensors window, one at idle and another while putting load on the PC using Prime95 for the CPU side and Furmark for the GPU.Before running Prime95 make sure to enable Round-off checking (see 1st post under the tutorial).


   Note
It is not mandatory to run both tests simultaneously, although possible as long as the temperatures are under constant monitoring.

Reset the BIOS back to default:CLR CMOS


   Note
Write down the current value of the SATA Mode!
Its either AHCI or IDE.
After resetting the CMOS go back and verify the value for SATA Mode is what it was
when the OS was installed.

If any component is overclocked reset it back to stock speeds!



Good places to read more:
Stop 0x124 - what it means and what to try
Stop 0x124 Troubleshooting - 'New Method'

http://www.sevenforums.com/bsod-help-support/316939-bsod-before-after-fresh-windows-install-during-game.html
Relevancy 68.37%

Hey, I'm installing windows XP onto a 500 g SATA hard disk that I just installed into a Dell Dimension 9100.

I have an .iso file that I need to place onto a DVD to serve as the OS boot disc. My DVD-R is in my Mac. So i need to burn this .iso file on the mac but have it boot the PC..

What is the proper file extension for the dvd file? is there anything I need to do that I'm missing?
 

A:Fresh Windows XP Install on a Fresh Hard Drive using a Burned DVD OS install - PLZ HL

http://hints.macworld.com/article.php?story=20060619181010389
 

https://forums.techguy.org/threads/fresh-windows-xp-install-on-a-fresh-hard-drive-using-a-burned-dvd-os-install-plz-hl.956512/
Relevancy 67.94%

Hello,

I recently re installed Windows 8 then upgraded to Windows 8.1 because I was having BSOD. Now on the fresh install, which is 4 days or so old, my computer BSOD on start up like before.

My guess hardware failure or Norton....

Thank you for your help.

A:BSOD on computer start up, After fresh Windows install

Uninstall Norton, use removal tool after. Set Windows Defender and Windows Firewall to Auto.

Uninstall HotspotShield.

Update: AE3000w764 AE3000w764.sys Fri Mar 02 05:57:24 2012 (4F50A794)

Uninstall if issues persist:

ptun0901.sys

and NeoVPN (SoftEther)

http://www.eightforums.com/bsod-crashes-debugging/42484-bsod-computer-start-up-after-fresh-windows-install.html
Relevancy 67.94%

Hello I am getting BSOD for a few weeks now before that my PC was working fine I have not added any new component recently I have fully installed the OS Windows x a couple of random install x64 -fresh 8 0xc0000005 Windows BSOD days ago but still get BSOD randomly I don't get any BSOD when I am in safe mode random BSOD 0xc0000005 -fresh Windows 8 x64 install I have tried removing some of the ram sticks random BSOD 0xc0000005 -fresh Windows 8 x64 install running memtest for couple of hours no error found run disk checks on all hard disks no errors tried to remove the GPU still get crashes I have posted the anaylysis of the BSOD any help is appreciated Thx Bugcheck Analysis Use analyze -v to get detailed debugging information BugCheck B c fffff a e fffff e f Probably caused by ntkrnlmp exe nt PoIdle a Followup MachineOwner --------- kd gt analyze -v Bugcheck Analysis SYSTEM SERVICE EXCEPTION b An exception happened while executing a system service routine Arguments Arg c Exception code that caused the bugcheck Arg fffff a e Address of the instruction which caused the bugcheck Arg fffff e f Address of the context record for the exception that caused the bugcheck Arg zero Debugging Details ------------------ EXCEPTION CODE NTSTATUS xc - The instruction at x lx referenced memory at x lx The memory could not be s FAULTING IP fffff a e CONTEXT fffff e f -- cxr xfffff e f Unable to read context Win error n CUSTOMER CRASH COUNT DEFAULT BUCKET ID VISTA DRIVER FAULT BUGCHECK STR x B PROCESS NAME System CURRENT IRQL LAST CONTROL TRANSFER from fffff acb ca to fffff c e f STACK TEXT fffff f c fffff acb ca e ab fffffa e fffff c c xfffff c e f fffff f ca fffff ac d c fffff c e fffff fffff f db nt PoIdle x a fffff f d nt KiIdleLoop x c FOLLOWUP IP nt PoIdle a fffff acb ca fba f bt dword ptr lt Unloaded Unknown Module gt x Fh SYMBOL STACK INDEX SYMBOL NAME nt PoIdle a FOLLOWUP NAME MachineOwner MODULE NAME nt IMAGE NAME ntkrnlmp exe DEBUG FLR IMAGE TIMESTAMP e aa STACK COMMAND cxr xfffff e f kb FAILURE BUCKET ID X x B nt PoIdle a BUCKET ID X x B nt PoIdle a Followup MachineOwner ---------

A:random BSOD 0xc0000005 -fresh Windows 8 x64 install

  
Quote: Originally Posted by mfrey


Hello,

I am getting BSOD for a few weeks now, before that my PC was working fine. I have not added any new component recently.

I have fully installed the OS (Windows 7 x64) a couple of days ago, but still get BSOD randomly. I don't get any BSOD when I am in safe mode.

I have tried removing some of the ram sticks, running memtest86 for couple of hours (no error found), run disk checks on all hard disks (no errors), tried to remove the GPU (still get crashes).

I have posted the anaylysis of the BSOD, any help is appreciated

Thx


*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 3B, {c0000005, fffff88004a03e51, fffff880097e93f0, 0}
Probably caused by : ntkrnlmp.exe ( nt!PoIdle+53a )
Followup: MachineOwner
---------
0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff88004a03e51, Address of the instruction which caused the bugcheck
Arg3: fffff880097e93f0, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.
Debugging Details:
------------------

EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
FAULTING_IP:
+3732313831663533
fffff880`04a03e51 ?? ???
CONTEXT: fffff880097e93f0 -- (.cxr 0xfffff880097e93f0)
Unable to read context, Win32 error 0n30
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x3B
PROCESS_NAME: System
CURRENT_IRQL: 0
LAST_CONTROL_TRANSFER: from fffff80002acb0ca to fffff88003c7e7f2
STACK_TEXT:
fffff800`03f94c98 fffff800`02acb0ca : 00000000`0032e5ab fffffa80`051764e8 fffff800`02c45c40 00000000`00000002 : 0xfffff880`03c7e7f2
fffff800`03f94ca0 fffff800`02ac5d5c : fffff800`02c37e80 fffff800`00000000 00000000`00000000 fffff880`03f94db0 : nt!PoIdle+0x53a
fffff800`03f94d80 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiIdleLoop+0x2c

FOLLOWUP_IP:
nt!PoIdle+53a
fffff800`02acb0ca 0fba25761518000f bt dword ptr [<Unloaded_Unknown_Module_00000000`00000000>+0x181576 (00000000`00181576)],0Fh
SYMBOL_STACK_INDEX: 1
SYMBOL_NAME: nt!PoIdle+53a
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: nt
IMAGE_NAME: ntkrnlmp.exe
DEBUG_FLR_IMAGE_TIMESTAMP: 4e02aa44
STACK_COMMAND: .cxr 0xfffff880097e93f0 ; kb
FAILURE_BUCKET_ID: X64_0x3B_nt!PoIdle+53a
BUCKET_ID: X64_0x3B_nt!PoIdle+53a
Followup: MachineOwner
---------



These were caused by a memory exception. Please run these two tests to verify your memory and find which driver is causing the problem.
1-Memtest.

*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

RAM - Test with Memtest86+

2-Driver verifier






Quote:
I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Win... Read more

http://www.sevenforums.com/bsod-help-support/193656-random-bsod-0xc0000005-fresh-windows-8-x64-install.html
Relevancy 67.94%

Just assembled a new machine using an AMD Phenom II 970 X4 processor, 8GB Corsair DDR3 RAM, and an MSI 890GTX-G65 Motherboard. Windows installed fine, I started to download and install updates through Windows Update then it began to Blue Screen at random. Currently I can get it to log in but any attempt to install software or updates, run the system check, or sometimes just at idle. I have tested the RAM and swapped it with known good RAM from a working machine. I've run through my hardware drivers and all appear to be up to date. I have no overclocking and there is no third-party software installed yet.

I am unable to attach the system performance report because the system crashes when doing so. I will keep trying and will post if it succeeds.

Any help will be greatly appreciated.

Jason

A:BSOD, Random times. Fresh install Windows 7 64 bit.

System Health Report succeeded.

http://www.sevenforums.com/bsod-help-support/189665-bsod-random-times-fresh-install-windows-7-64-bit.html
Relevancy 67.94%

I have read the instructions. I apologize ahead of time if I mess something up.

This PC has ran fine since 2008 when it was built. It was recently updated to Windows 7 Pro OEM. During the OS upgrade it had more memory added (4x2GB, all slots filled). Upgrade and install went flawlessly. All software (photoshop, premiere, firefox, antivirus) was re-installed without any errors or hick-ups. Upon updating firefox (I believe the timing was co-incidence) it Blue Screened. It has had issues ever since. So my last stitch effort was to back everything up and re-install Windows and hope that it fixed the problem. Needless to say that it hasn't been fixed and it still randomly blue screens. Windows Memory Diagnostic ran with no errors returned. Thanks in advance for the help.

A:BSOD before and after fresh Windows install. Has ran good since 2008..

Only 27 updates since SP1 - most systems have 70 or more. Please visit Windows Update and get all available updates (it may take checking multiple times).

Nice clean system - and with the reinstall of Windows it's most likely a hardware problem.
BUT, let's try this stuff first:

NCREMOTEPCI.SYS dates from 2006
Please update this driver, it most likely belongs to the software for your Satellite TV receiver.
More info on the driver here: Driver Reference Table

nvm62x64.sys dates from 2008
Please update this driver, it is the networking driver for your motherboard and comes packed with the nVidia chipset drivers at Drivers - Download NVIDIA Drivers
More info on the driver here: Driver Reference Table

atinavrr.sys dates from 2008
Please update this driver, it most likely belongs to the ATI drivers on your system. I have no idea of what ATI device it could be associated with as there is no dxdiag report in the uploaded files.
If unable to update it, please uninstall the ATI software from your system.
If still unable to remove the driver, post back and we'll give instructions on how to safely remove it.
More info on the driver here: Driver Reference Table

If these don't fix it, then start with the free hardware diagnostics here: Hardware Diags I'd start with the hard drive test as the BSOD blames the NTFS file system (and that's on the hard drive).

Further info on BSOD error messages available at: http://www.carrona.org/bsodindx.html

The following info is just FYI, I've already addressed the issues that I saw in the above paragraphs:
3RD PARTY DRIVERS PRESENT IN THE DUMP FILES
- Create a System Restore Point prior to doing any of this. DO NOT mess with the drivers themselves - leave the Windows\System32\drivers directory alone unless we specifically direct you to it!
- Please either update the older drivers from the device manufacturer's website - or uninstall them from your system. Reference links are included below.
- DO NOT use Windows Update or the Update Drivers function of Device Manager.
- Please feel free to post back about any drivers that you are having difficulty locating.
- Windows Update exceptions may be noted below for Windows drivers.

Code:

nvraid.sys Fri Mar 19 16:59:20 2010 (4BA3E5A8)
nvstor.sys Fri Mar 19 16:45:11 2010 (4BA3E257)
amdxata.sys Fri Mar 19 12:18:18 2010 (4BA3A3CA)
dump_nvstor.sys Fri Mar 19 16:45:11 2010 (4BA3E257)
nvm62x64.sys Fri Oct 17 17:01:06 2008 (48F8FD12)
nvlddmkm.sys Thu May 14 16:48:07 2009 (4A0C8387)
atinavrr.sys Wed May 14 21:16:11 2008 (482B8EDB)
NCREMOTEPCI.SYS Mon Sep 11 16:47:50 2006 (4505CB76)

http://www.carrona.org/drivers/driver.php?id=nvraid.sys
http://www.carrona.org/drivers/driver.php?id=nvstor.sys
http://www.carrona.org/drivers/driver.php?id=amdxata.sys
http://www.carrona.org/drivers/driver.php?id=dump_nvstor.sys
http://www.carrona.org/drivers/driver.php?id=nvm62x64.sys
http://www.carrona.org/drivers/driver.php?id=nvlddmkm.sys
http://www.carrona.org/drivers/driver.php?id=atinavrr.sys
http://www.carrona.org/drivers/driver.php?id=NCREMOTEPCI.SYS

BSOD BUGCHECK SUMMARY

Code:

Loading Dump File [C:\Users\FUBAR\_jcgriff2_\dbug\__Kernel__\021812-21871-01.dmp]
Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Debug session time: Sat Feb 18 19:59:46.163 2012 (UTC - 5:00)
System Uptime: 0 days 0:16:14.209
Probably caused by : Ntfs.sys ( Ntfs! ?? ::FNODOBFM::`string'+2b49 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: svchost.exe
BUGCHECK_STR: 0x24
FAILURE_BUCKET_ID: X64_0x24_Ntfs!_??_::FNODOBFM::_string_+2b49
Bugcheck code 00000024
Arguments 00000000`001904fb fffff880`06d65ea8 fffff880`06d65700 fffff800`029d3b87
BiosVersion = 6.00 PG
BiosReleaseDate = 11/24/2009
CPUID: "Intel(R) Core(TM)2 Quad CPU Q9450 @ 2.66GHz"
MaxSpeed: 2660
CurrentSpeed: 2666
??????????????????????????????????????????????????????????????????????????????????????``

http://www.sevenforums.com/bsod-help-support/214969-bsod-before-after-fresh-windows-install-has-ran-good-since-2008-a.html
Relevancy 67.94%

Hey guys. I've been running this computer for about a year and a half now problem-free, and all of a sudden BSODs started popping up like white on rice. Typically they're either BAD_POOL_HEADERS or CDD.DLL, but there have been a couple more I didn't catch the full name of. I've also gotten the whole "file may be corrupted, checksum doesn't match up" message. I figured I just needed a nice clean install of Windows, but even after reinstalling the BSODs continued. I will say that they happen a lot more frequently playing vidya games--the first occurrence was during Borderlands, then CS:GO, the Binding of Isaac--but they happen just browsing the net as well. Any suggestions? Thanks in advance!

A:BSOD randomly on fresh Windows install, BAD_POOL_HEADER and others

Also, I should probably add that I've already uninstalled DaemonTools--immediately after posting that .zip, as a matter of fact.

http://www.sevenforums.com/bsod-help-support/242931-bsod-randomly-fresh-windows-install-bad_pool_header-others.html
Relevancy 67.94%

Hi - this is my first post and I've left this as long as I could stand before needing to turn to someone anyone for help I don't know very much about the technical side of computers so please bear with me if I Issue 7 Windows and DBAN after Install BSOD fresh have to question any instructions I don't understand My laptop is years old Toshiba Satellite P - FC BSOD Issue after DBAN and fresh Windows 7 Install and has been having a problem BSOD Issue after DBAN and fresh Windows 7 Install with system freezes and BSOD's It started about months ago when I was uploading photos from my camera's SD card onto my laptop I had a lot of photos from my wedding from different family members so was using all different memory cards to get all photos on my laptop Suddenly the folder I was viewing photos in froze - BSOD then came along swiftly Didn't think too much of it the first time so tried again and it happened everytime I reached a particular section of photos in a folder Around this same time I had thought that the Norton I was running had picked up some viruses as it was behaving a little strangely turning itself off and telling me a full scan had completed in seconds After trying a few things I decided to wipe the hard drive using DBAN and start over with Windows My laptop had originally been installed with Vista - which I wasn't so fond of so Windows seemed a good idea So I started right from scratch about a month ago and installed Windows Enterprise bit and got my Norton back on the system but removed MBAM at the request of Norton as they said it could interfere with Norton products Now I am having BSOD's here and there but it always seems to relate to running any media based programs - windows live movie maker viewing videos on windows media player or dealing with photos Is anyone able to give any advice on what the problem might be BSOD zip file attached Thanks Natalie

A:BSOD Issue after DBAN and fresh Windows 7 Install

Quote:
but removed MBAM at the request of Norton as they said it could interfere with Norton products.


MBAM has no conflicts with Norton at all.
Download Malwarebytes and run a full scan, your system seems to be infected
The symantec engine used by N360 caused your BSODs, I'd recommend completely removing Norton and reinstalling from scratch, your N360 has corrupt install

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 7A, {c0501af0, c0000185, 261ae8c0, a035e830}

Unable to load image \??\C:\ProgramData\Norton\{0C55C096-0F1D-4F28-AAA2-85EF591126E7}\N360_5.1.0.29\Definitions\VirusDefs\20110722.040\NAVEX15.SYS, Win32 error 0n2
*** WARNING: Unable to verify timestamp for NAVEX15.SYS
*** ERROR: Module load completed but symbols could not be loaded for NAVEX15.SYS
*** WARNING: Unable to verify timestamp for SRTSP.SYS
*** ERROR: Module load completed but symbols could not be loaded for SRTSP.SYS
Probably caused by : NAVEX15.SYS ( NAVEX15+5b8af )

Followup: MachineOwner
---------

1: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

KERNEL_DATA_INPAGE_ERROR (7a)
The requested page of kernel data could not be read in. Typically caused by
a bad block in the paging file or disk controller error. Also see
KERNEL_STACK_INPAGE_ERROR.
If the error status is 0xC000000E, 0xC000009C, 0xC000009D or 0xC0000185,
it means the disk subsystem has experienced a failure.
If the error status is 0xC000009A, then it means the request failed because
a filesystem failed to make forward progress.
Arguments:
Arg1: c0501af0, lock type that was held (value 1,2,3, or PTE address)
Arg2: c0000185, error status (normally i/o status code)
Arg3: 261ae8c0, current process (virtual address for lock type 3, or PTE)
Arg4: a035e830, virtual address that could not be in-paged (or PTE contents if arg1 is a PTE address)

Debugging Details:
------------------
ERROR_CODE: (NTSTATUS) 0xc0000185 - The I/O device reported an I/O error.

DISK_HARDWARE_ERROR: There was error with disk hardware

BUGCHECK_STR: 0x7a_c0000185

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

PROCESS_NAME: dllhost.exe

CURRENT_IRQL: 0

TRAP_FRAME: ac8475d0 -- (.trap 0xffffffffac8475d0)
ErrCode = 00000000
eax=a035e838 ebx=0005e830 ecx=00000002 edx=00000000 esi=a035e830 edi=986bbed0
eip=82a8f8d8 esp=ac847644 ebp=ac84764c iopl=0 nv up ei ng nz ac pe cy
cs=0008 ss=0010 ds=0023 es=0023 fs=0030 gs=0000 efl=00010297
nt!memcpy+0x128:
82a8f8d8 8b448ef8 mov eax,dword ptr [esi+ecx*4-8] ds:0023:a035e830=00000000
Resetting default scope

LAST_CONTROL_TRANSFER: from 82af9e35 to 82b34f2c

STACK_TEXT:
ac847434 82af9e35 0000007a c0501af0 c0000185 nt!KeBugCheckEx+0x1e
ac8474a4 82afd716 ac8474f8 82bc0240 ac847518 nt!MiWaitForInPageComplete+0x302
ac847534 82ae6967 82bc0240 a035e830 850b5128 nt!MiIssueHardFault+0x3b3
ac8475b8 82a973d8 00000000 a035e830 00000000 nt!MmAccessFault+0x2656
ac8475b8 82a8f8d8 00000000 a035e830 00000000 nt!KiTrap0E+0xdc
ac84764c 9e45b8af 986bbed0 a035e830 00000008 nt!memcpy+0x128
WARNING: Stack unwind information not available. Following frames may be wrong.
ac84767c 9e46039f 0005e830 00000008 986bbed0 NAVEX15+0x5b8af
ac8476a0 9e478003 000... Read more

http://www.sevenforums.com/bsod-help-support/177082-bsod-issue-after-dban-fresh-windows-7-install.html
Relevancy 67.94%

I recently reinstalled Windows 7 on my computer after it stopped being able to boot normally. I managed to get it installed, but I won't be able to get into safe mode as it won't let me set up Windows. Every time I try to boot it normally, it creates this BSOD. I have a picture of the BSOD. Sorry about the bad quality. If the attachment doesn't work: http://i.imgur.com/tBnnwA6.jpg

Thank you.

A:BSOD after fresh install of Windows 7. Error 0x00000050.

Welcome to 7F. Without dump files it's nigh on impossible to pinpoint the issue, however a STOP 0x50 can be down to defective hardware, particularly RAM. Luckily you can test your RAM without booting into Windows.

Download and run MemTest86+ to test your RAM. RAM - Test with Memtest86+



   Note


Run MemTest86+ for at least 8 passes. Ideally set it off before you go to bed and leave it overnight, we're looking for zero errors here. A single error will show something's going bad with your RAM.
If your RAM passes this test then the best we can offer is guesswork unfortunately. Run the test and let us know how it goes.

http://www.sevenforums.com/bsod-help-support/368136-bsod-after-fresh-install-windows-7-error-0x00000050.html
Relevancy 67.94%

Hello, this is my first post in sevenforums. i have been facing a terrible problem lately. After just a regular windows installation My pc performance became extremely poor and hangs frequently, it either hangs or restarts showing bsod. About 6 times per hour (just imagine how annoying that can be ) I installed windows formatting my C drive 4 times already, but the problem seems to persist. I ran malwarebytes in safe mode using chameleon but nothing was found (except the usual crack files). All the softwares i use are the same ones i have been using for 4-5 years, just upgraded versions. After reading some threads here i uninstalled Virtual clone drive. The pc is now stable for the last 4 hours..no freeze,no bsod..but i am not sure if it stopped immediately after uninstalling that software.( I have already spent hours searching for solutions, getting kind of sloppy now). Can anyone please help me with this problem?

A:Random freeze and BSOD even after fresh install of windows 7

Dont get sloppy, man

First of all, Virtual Clone Drive causes a lot of BSODs. Uninstalling it is the right step. Observe the situation over a few hours. Restart it a couple of times. If it was all due to VirtualClone Drive, it is over.

For any further BSOD, post it following the Blue Screen of Death (BSOD) Posting Instructions.

And, dont put anything in startup, other than egui.

http://www.sevenforums.com/bsod-help-support/304810-random-freeze-bsod-even-after-fresh-install-windows-7-a.html
Relevancy 67.94%

After reloading win7 h.p. back to my laptop from the factory disks, and doing all windows updates, I am getting BSOD at what appears to be random times.

Can be anywhere from a few minutes to an hour after rebooting.

I have attached the .zip file created with the awesome SF_Diagnostic_Tool.

Please let me know if I can provide any other information.

Thanks for any help

A:BSOD Fresh install of windows 7 home premium

Security App

Code:
Start Menu\Programs\AVG Public:Start Menu\Programs\AVG Public
Your AVG can be a possible cause. Remove AVG and replace with Microsoft Security Essentials to see if it provides more stability. Uninstallers (removal tools) for common antivirus software. Microsoft Security Essentials and Malwarebytes are recommended from a strict BSOD perspective. They do not cause blue screens on the system as other AV products do.

Microsoft Security Essentials, Free antivirus for windows and Malwarebytes Anti-Malware Free



   Information
Do not start the free trial of MalwareBytes, unselect that option when prompted.


Update and make full scans with both separately.


Start up

Keep less stuff at the start-up. Only anti-virus, this helps avoid driver conflicts and improves time to log in to windows.
Troubleshoot a Problem by Performing a Clean Startup in Windows 7 or Vista
How to Change, Add, or Remove Startup Programs in Windows 7

SFC /scannow to check windows for corruption:

How to Repair Windows 7 System Files with System File Checker
1. Click Start
2. In the search box, type Command Prompt
3. In the list that appears, right-click on cmd.exe and choose Run as administrator
4. In the command window that opens, type sfc /scannow

http://www.sevenforums.com/bsod-help-support/294676-bsod-fresh-install-windows-7-home-premium.html
Relevancy 67.94%

PC details Lenovo ThinkCentre M - W T Intel Core GHz GB Ram TB Seagate SSHD new After attempts to do a fresh install of Windows pro bit I am still getting random restarts of my 0x8000000000000002 64bit after Windows install pro BSOD of fresh 7 desktop No BSOD The BSOD 0x8000000000000002 after fresh install of Windows 7 pro 64bit screen just goes blank and the PC restarts I did try updating drivers from Lenvo on the first install attempt but it did not work There are no virus issues The HD was brand new too Sometimes I can surf for hours with no issues Sometimes it will restart several times within a few minutes In fact while writing this post It has done it times now in the last few minutes One thing I have noticed is that it does it often when trying to access external media external HD or SD card for example But also does it at other times too so it is not exclusive to the external media I have read the BSOD tutorial and ran the DM log collector Zip file attached I also ran SF Diagnostic Tool Zip file attached Any help or guidance would be greatly appreciated Thank you Just did it again New SFDT report attached

A:BSOD 0x8000000000000002 after fresh install of Windows 7 pro 64bit

I don't know if this screen shot will help, but here is the event viewer log:

http://www.sevenforums.com/bsod-help-support/337595-bsod-0x8000000000000002-after-fresh-install-windows-7-pro-64bit.html
Relevancy 67.94%

Hi I just recently bought an After Upgrade Windows Fresh 7 Motherboard BSOD Install, AMD FX- CPU and come to find out my old motherboard didn't support it I've upgraded to a Gigabyte FXA-UD from an ASUS M A T-E After a fresh install of Windows I continually get an F and A error code BSOD Main Drive is GB OCZ-VERTEX ATA SSD it is the only thing plugged in at the moment as far as hard drives Details of when usually seems to interrupt me when I'm trying to do something specific like download install something however I've seen it do it after a clean restart as well I have run Memtest with errors My BIOS is up to date save for a single beta update that is newer but I didn't want to go that route just yet I've attached the zip file that the quot before you post quot section had me do along with a couple very recent BSOD After Fresh Windows 7 Install, Motherboard Upgrade dump files including one that I believe captures a time when I had just simply opened IE after a restart My guess is corrupt memory after everything I've read on here but I have no way of reading the dump files for myself as I seem to have an issue installing Windows SDK but that's another issue for another forum Also I have no idea how to fix that Any help would be greatly appreciated Thanks in advance

A:BSOD After Fresh Windows 7 Install, Motherboard Upgrade

Update.
Now while attempting to verify any un-updated drivers, I've reached a state of:
BSOD - Restart - Attempt to Open IE - BSOD - Restart - etc repeating.

http://www.sevenforums.com/bsod-help-support/357735-bsod-after-fresh-windows-7-install-motherboard-upgrade.html
Relevancy 67.94%

I got a new disk earlier and installed Windows 7. After doing that I installed graphics card drivers and motherboard's drivers from their official site (ASRock > Products > Motherboard > Z77 Extreme4 > Download).

Ever since then I've been having BSODs on the vast majority of my boot attempts. I've tried disabling and uninstalling several drivers but had no luck so far.

The system works fine booting with the old disk, so I'm assuming something has either gone wrong with the install, or the drivers I installed on the first boot.

The appropriate information is attached.


? Windows 7
? x64
? Fresh build
? Retail version of Windows 7 Professional from MSDN
? Disk is new, Motherboard and Chip ~1 year old, graphics card ~2 years old
? Fresh OS installation on brand new disk

? i5-3570K
? Radeon HD 5700
? Z77 Extreme4
? Tagan 350w PSU

? Built myself

A:[SOLVED] Fresh install of Windows 7 BSOD on 90% on boots

Recommendations:Crashes point to the solid state drive as the problem. They indicate that it is not always seen by the system. Disable verifier and proceed with SSD troubleshooting steps below.Start Menu -> All Programs -> Accessories -> Right click Command Prompt -> Run as administrator -> Type the following command and then Enter:
Code:
verifier /reset
-> Restart your computer.
SSD Troubleshooting:The crashes you are receiving are common with SSDs when there are incompatible drivers, hardware, BIOS, or firmware issues. Proceed with SSD troubleshooting:Make sure the following are up to date:SSD firmware
BIOS Version
Chipset Drivers
Hard disk controller drivers/SATA drivers
If you have a Marvell IDE ATA/ATAPI device, make sure the drivers are up to date from the Intel site or Marvell site and not from your motherboard/vendor support site.

If this is a desktop system, try connecting the drive to a different hard disk controller connection, i.e. Marvell instead of Intel, ASMedia instead of Intel, Intel instead of ASMedia or Marvell, etc.

Try doing a power cycle of the SSD. The following steps should be carried out and take ~1 hour to complete.Power off the system.
Remove all power supplies (ac adapter then battery for laptop, ac adapter for desktop)
Hold down the power button for 30 seconds to close the circuit and drain all components of power.
Reconnect all power supplies (battery then ac adapter for laptop, ac adapter for desktop)
Turn on the system and enter the BIOS (see your manual for the steps to enter the BIOS)
Let the computer remain in the BIOS for 20 minutes.
Follow steps 1-3 and physically remove the SSD from the system by disconnecting the cables for a desktop or disconnecting the drive from the junction for a laptop.
Leave the drive disconnected for 30 seconds to let all power drain from it.
Replace only the drive power connection if it is a desktop, (fully reconnect the drive to the system if it is a laptop) and then do steps 4-8 again.
Follow steps 1-3 again.
Reconnect the drive fully to the system.
Reconnect all power supplies (battery then ac adapter for laptop, ac adapter for desktop)
Start your computer normally and run Windows.
The above steps were a result of: Why did my SSD "disappear" from my system? - Crucial Community

While that may not be your drive, a power cycle should be the same on all SSD drives. See how the system responds after the SSD power cycle.
If the above does not work, try replacing your SSD with a platter hard disk drive to see if the SSD is faulty or causing conflicts with your overall setup.

Outdated and Problematic Drivers:You should update/replace/remove the following drivers. Any drivers that are known to cause BSODs, please remove the software or remove the drivers and then remove the device; steps to do so are given after the list of outdated drivers.
AsrAppCharger.sys Tue May 10 02:28:46 2011 (4DC8F73E)
ASRock App Charger Likely BSOD cause - haven't seen recently (15Jan2013)
http://www.carrona.org/drivers/driver.php?id=AsrAppCharger.sys

To update drivers, make sure to download the drivers from the manufacturer and not using 3rd party programs. Your drivers should be found from your motherboard support site (ASUS, Gigabyte, MSI, etc.) or your vendor support site (Dell, HP, Toshiba, Sony, etc.) first. If you have devices you bought yourself, the drivers for those devices need to be downloaded from the manufacturer support site for those devices. If you need help, let us know.

To remove drivers, do so by uninstalling the device or software associated with the driver. Devices can be uninstalled through device manager, and then the device itself should be physically removed from the system if no driver updates are available for the device. If it does not make sense to remove the device, i.e. the device is a motherboard, please ask us for further assistance.Uninstall or change a program

Open Device Manager
3rd Party Drivers: ... Read more

http://www.techsupportforum.com/forums/f299/solved-fresh-install-of-windows-7-bsod-on-90-on-boots-691314.html
Relevancy 67.94%

Hey guys ,

I just did a fresh install of windows 8.1 pro on my new rig, all updates done and drivers correct , but every now and then I am getting BSOD Windows 8.1 Kernel Security Check Failure on Windows

Your Help would be much appreciated

I followed these instructions "Blue Screen of Death (BSOD) Posting Instructions" please find the information attached.

Kind Regards

A:Random BSOD - Windows 8.1 pro, fresh install and setup.

Uninstall Asus bloatware. Update Logitech drivers. Disable Nvidia Streaming service in services. msc. If BSODs persist, please enable Driver Verifier: Driver Verifier - BSOD related - Windows 10, 8.1, 8, 7 & Vista - Sysnative Forums

Code:
AsInsHelp64.sys Fri Jan 4 06:36:10 2008 (477DC5CA)
Asus Ai Booster software
http://www.carrona.org/drivers/driver.php?id=AsInsHelp64.sys

WmVirHid.sys Tue Apr 27 22:08:53 2010 (4BD74455)
Logitech WingMan Virtual Hid Device Driver
http://www.carrona.org/drivers/driver.php?id=WmVirHid.sys

WmXlCore.sys Tue Apr 27 22:09:26 2010 (4BD74476)
Logitech WingMan Translation Driver
http://www.carrona.org/drivers/driver.php?id=WmXlCore.sys

WmBEnum.sys Tue Apr 27 22:10:19 2010 (4BD744AB)
Logitech WingMan Virtual Bus Enumerator Driver
http://www.carrona.org/drivers/driver.php?id=WmBEnum.sys

WmFilter.sys Tue Apr 27 22:10:19 2010 (4BD744AB)
Logitech WingMan Hid Filter
http://www.carrona.org/drivers/driver.php?id=WmFilter.sys

npf.sys Fri Jun 25 18:50:58 2010 (4C24DE72)

npf.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

AsUpIO.sys Tue Aug 3 04:47:59 2010 (4C57835F)
ASUS hardware monitoring software related
http://www.carrona.org/drivers/driver.php?id=AsUpIO.sys

ASUSFILTER.sys Tue Sep 20 17:46:33 2011 (4E78B559)
ASUS USB Hub filter driver
http://www.carrona.org/drivers/driver.php?id=ASUSFILTER.sys

AiChargerPlus.sys Thu Apr 19 03:17:35 2012 (4F8F67AF)
Asus Charger Driver [br] Likely BSOD cause - haven't seen recently (15Jan2013)
http://www.carrona.org/drivers/driver.php?id=AiChargerPlus.sys

TuneUpUtilitiesDriver64.sys Fri May 25 12:28:19 2012 (4FBF5EC3)

TuneUpUtilitiesDriver64.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

AsIO.sys Wed Aug 22 11:54:47 2012 (5034AC67)
Asus PCProbe Utility
http://www.carrona.org/drivers/driver.php?id=AsIO.sys

cbfs3.sys Mon Feb 11 13:43:08 2013 (5118E75C)
Callback File System
http://www.carrona.org/drivers/driver.php?id=cbfs3.sys

ALSysIO64.sys Tue Mar 5 22:50:34 2013 (513668AA)
Core Temp - CPU temperature monitor
http://www.carrona.org/drivers/driver.php?id=ALSysIO64.sys

ASUSwh.sys Thu Mar 28 18:44:34 2013 (51548182)
ASUS USB 3.0 Boost Storage Driver
http://www.carrona.org/drivers/driver.php?id=ASUSwh.sys

ASUScr.sys Thu Mar 28 18:44:37 2013 (51548185)
ASUS USB 3.0 Boost Storage Driver
http://www.carrona.org/drivers/driver.php?id=ASUScr.sys

ASUSumsc.sys Thu Mar 28 18:44:44 2013 (5154818C)
ASUS USB 3.0 Boost Storage Driver
http://www.carrona.org/drivers/driver.php?id=ASUSumsc.sys

ASUSstpt.sys Thu Mar 28 18:44:49 2013 (51548191)
ASUS USB 3.0 Boost Storage Driver
http://www.carrona.org/drivers/driver.php?id=ASUSstpt.sys

IOMap64.sys Tue Jul 2 10:27:47 2013 (51D28F03)
ASUS Kernel Mode Driver ?Asus Smart Doctor/iTracker 2 Asus GPU Tweak and GPU Tweak Streaming from this link: BSOD after sleep, restarts, driver_power_state_failure )
http://www.carrona.org/drivers/driver.php?id=IOMap64.sys

intelppm.sys Thu Aug 22 10:46:35 2013 (5215CFEB)
Intel Processor driver
http://www.carrona.org/drivers/driver.php?id=intelppm.sys

iqvw64e.sys Thu Nov 14 16:22:43 2013 (5284EAC3)

iqvw64e.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

asmtxhci.sys Thu Jan 9 10:16:37 2014 (52CE68F5)
Asmedia USB 3.0 driver
http://www.carrona.org/drivers/driver.php?id=asmtxhci.sys

asmthub3.sys Thu Jan 9 10:16:42 2014 (52CE68FA)
ASMedia USB 3.0 Hub driver
http://www.carrona.org/drivers/driver.php?id=asmthub3.sys

TeeDriverx64.sys Thu Mar 13 19:21:52 2014 (5321F740)
Intel Management Engine Interface driver
http://www.carrona.org/drivers/driver.php?id=TeeDriverx64.sys

asstor64.sys Fri Mar 14 04:38:20 2014 (532279AC)
As... Read more

http://www.eightforums.com/bsod-crashes-debugging/59822-random-bsod-windows-8-1-pro-fresh-install-setup.html
Relevancy 67.94%

I need help to my laptop here using Windows 8 64bit. I got multiple BSOD even after I reinstall Windows. I've already try Windows 8.1 and 8 still got many BSOD. I also run chkdsk to all of my drive no error and memtest86+ to each of my RAM no error found.

My laptop spec is Dell Inspiron 3421
Intel Core i3 2365m
Intel HD graphics 3000
RAM 2x 2GB (4GB)

This is my dmp files.
ARDAN-Sun_11_01_2015__30637_53.zip

please help me solve my BSOD problem, I already tried reinstall windows several times, reinstall drivers, test hard drive and RAM, still no success getting rid of BSOD. Your help is very appreciated..

A:Multiple random BSOD even after fresh install windows 8

Hi davidcanon,

You are running a counterfeit installation of Windows 8.
This is against the rules.

What Windows version was pre-installed on your laptop?
You need to reset your system to the factory settings or clean install Windows.

Troubleshooting a counterfeit installation is useless as it is not known what has been modified to your system.
A counterfeit installation contains heavily modified code which causes the system to behave in unexpected ways.
For this reason, analyzing counterfeit systems is unreliable and most analysts won't try it.

Forum rules





4) No piracy or discussion of piracy allowed at all. Such as software, music, videos and other intellectual property violations (e.g. downloading youtube videos locally etc).

http://www.eightforums.com/bsod-crashes-debugging/72008-multiple-random-bsod-even-after-fresh-install-windows-8-a.html
Relevancy 67.94%

I built this PC about a year ago and had BSOD on it immediately I updated a driver I think to fix it, well I just had a major computer crash and rebooted with a fresh install of windows 7 but I have the BSOD problem again and I cant remember how I fixed it the first time. I have attached a bunch of dmp reports, its happening regularly, please help, feel free to ask any questions.

http://www.sevenforums.com/bsod-help-support/393070-bsod-fresh-install-windows-7-custom-built-pc.html
Relevancy 67.94%

Hi So i have been having issues with my MSI GT D days ago i had a bsod i had a had quite a few before hand but it seemed to have fixed itself as this was my first bsod in several months Once it restarted it kept going into quot Windows is checking Files quot It would then crash with horizontal colored lines across the center of the screen No cursor I ran the factory default from the bios and reverted my windows back to its original status then configured grub so it was pointing to the correct partition I have Kali Linux dual booted I had another BSOD the day after the reset and now for some reason my laptop seems to be using very high CPU usage It isnt constant but it fluctuates like crazy going from to then sitting at for a few seconds and so on When playing LOL i have random screen laggs for those of you who do not know this is not a game that requires high system specs i have gone through the following website and installed all the drivers BSOD, CPU [SOLVED] Very Fresh Windows Install - High listed MSI Australia - Computer Laptop Notebook Desktop Mainboard Graphics and more Still the same issue i am most probably going to try and remove kali linux and grub and see if that makes a difference but i cant see why it would I have attached a txt file with a DXDIAG report of my system specs for your consideration Please any help would be much appreciated bearing in my this laptop [SOLVED] BSOD, Fresh Windows Install - Very High CPU is still in warranty so i can have it sent in for warranty repair if [SOLVED] BSOD, Fresh Windows Install - Very High CPU needs be

A:[SOLVED] BSOD, Fresh Windows Install - Very High CPU

Please follow these instructions.

http://www.techsupportforum.com/foru...ta-452654.html

It does sound like a failing GPU though.

http://www.techsupportforum.com/forums/f299/solved-bsod-fresh-windows-install-very-high-cpu-888058.html
Relevancy 67.94%

BSOD c5 - while doing Windows Update after fresh Win7 install

It was while configuring updates after system restart.

A:BSOD c5 - while doing Windows Update after fresh Win7 install

Hi Vesparion.

Update internet explorer manually .... http://windows.microsoft.com/en-IN/i...r/download-ie/

Get rid of intel rapid storage. First uninstall it from Control Panel > Programs and Features. Then Uninstall the driver from device manager.
Right click on "my computer" icon and click "manage" on the context menu.
It will open the "computer management" window.
Select "Device Manager" in the left pane, It will list all the existing devices up.
Expand "IDE ATA/ATAPI controllers" by clicking on the triangle in front of it.
Select one Intel device item under it, right click, uninstall.
Continue the process for all Intel items under "IDE ATA/ATAPI controllers"
Now restart the computer. At restart, windows will auto configure the appropriate native system driver.
Let us know the results.

_________________________________________________________________________________

Code:
Event[2591]:
Log Name: System
Source: Service Control Manager
Date: 2013-11-16T01:43:44.794
Event ID: 7000
Task: N/A
Level: Error
Opcode: N/A
Keyword: Classic
User: N/A
User Name: N/A
Computer: i7-PC
Description:
The Intel(R) Rapid Storage Technology service failed to start due to the following error:
The pipe has been ended.

http://www.sevenforums.com/bsod-help-support/311889-bsod-c5-while-doing-windows-update-after-fresh-win7-install.html
Relevancy 67.94%

Hi. Attached is the .zip created from the tool listed HERE.

Constant BSOD's whenever I'm multitasking with dual-monitors, a game on the primary monitor and a media player on the secondary. Seems to be fine if I'm only doing one or the other.

This problem showed up about three months ago, completely out of the blue. Otherwise my system had been running fine for the past 8 months prior, with no hardware changes at all.
I have formatted my computer recently and reinstalled windows and ofcourse installed the most up to date AMD drivers, I thought that finally it would be fixed but this morning it happened again! So here I am.

Almost to the point where I'd like to throw my computer out a very high window!

A:BSOD atikmpag.sys related - Fresh Install of Windows

Hi Zayveon,

Your dump wasn't helpful (although it points to your graphics driver) so upon further inspection of your other files it looks like your OS is activated with an OEM SLP key that can only (legally) be attached to an ASUS computer. Your motherboard is Gigabyte so this key is not valid.

Where did you buy your product key form?

http://www.sevenforums.com/bsod-help-support/370085-bsod-atikmpag-sys-related-fresh-install-windows.html
Relevancy 67.94%

So I fried install for windows (new HDD after formatting BSOD fresh mobo) my old motherboard last week and just replaced it with an Asus Z- A I used my roommates pc to format my old hard drive and did a fresh windows Ultimate -bit install on it via USB drive After installing windows and installing all drivers that came with the mobo CD and the most BSOD after formatting HDD for fresh windows install (new mobo) recent driver for my nVidia Ti I loaded Ventrilo Teamspeak avast Malwarebytes WoW League of Legends and Diablo III These are the only changes I've made since the fresh windows install and I am receiving very frequent BSODs while playing wow and using TS As a side note I have noticed that my Google Chrome has BSOD after formatting HDD for fresh windows install (new mobo) loaded significantly slower since the new install despite the fact that I have greatly increased my internet quality mbps to mbps Also I'm new here so please forgive me if I'm not creating this thread using the correct template Attached are the results from running the SF Diagnostic Tool

A:BSOD after formatting HDD for fresh windows install (new mobo)

  
Quote: Originally Posted by Destroyalty


So I fried my old motherboard last week and just replaced it with an Asus Z-77A.



Code:
Host Name: DANIEL-PC
OS Name: Microsoft Windows 7 Ultimate
OS Version: 6.1.7600 N/A Build 7600
OS Manufacturer: Microsoft Corporation
OS Configuration: Standalone Workstation
OS Build Type: Multiprocessor Free
Registered Owner: Daniel
Registered Organization:
Product ID: 00426-OEM-8992662-00497

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 50, {fffff900c33627a0, 0, fffff9600075dc51, 0}
Could not read faulting driver name
Probably caused by : cdd.dll ( cdd!CddBitmapHw::Release+31 )

Followup: MachineOwner
---------
Daniel, is the installation activated? I would update Windows 7 fully, paying special attention to installing Service Pack 1 and checking Optional updates for device drivers.

http://www.sevenforums.com/bsod-help-support/323268-bsod-after-formatting-hdd-fresh-windows-install-new-mobo.html
Relevancy 67.94%

Hi This is my st BSOD after I did a Bios update on my laptop followed by a fresh install of Windows Pro It occurred during my installation of drivers The BSOD Error message was 8 fresh and Windows of install after update, BSOD Bios Driver Power State Failure The dump file is attached if anyone can help take a look at it as its got me worried The main reason I did a bios update was due to the multiple BSOD I had on my previous Bios I did try to open up the Dump file but have no idea on how to read it However it did mention the file name ntoskrnl exe From online searches the file is related to my kernel Does this means I installed the Bios wrongly If it matters during Bios installation I had to update the EC BSOD after Bios update, and fresh install of Windows 8 st followed by Bios update which had executable files to run Note -Bios updated myself obtained form laptop manufacturer Edit Uploaded Files as according to posting instructions Running the SF Debug Tool If it's I would like to learn how to read these files to solve problems myself if possible I used WinDbg to open the dumb file but got lost after that Possibly tell my how you found the cause of the problem

A:BSOD after Bios update, and fresh install of Windows 8

Get all available Windows updates, update your chipset driver and your Bluetooth filter driver.

Code:
btfilter.sys Fri Jun 29 09:00:07 2012 (4FED5277)
Atheros Bluetooth Driver
http://www.carrona.org/drivers/driver.php?id=btfilter.sys

HECIx64.sys Tue Jul 3 00:14:58 2012 (4FF21D62)
Intel Management Engine Interface
http://www.carrona.org/drivers/driver.php?id=HECIx64.sys

AMPPAL.sys Tue Jul 17 09:35:22 2012 (500515BA)
Intel? Centrino? Bluetooth 3.0 + High Speed Virtual Adapter driver
http://www.carrona.org/drivers/driver.php?id=AMPPAL.sys

intelppm.sys Thu Jul 26 04:26:48 2012 (5010AAE8)
Intel Processor driver
http://www.carrona.org/drivers/driver.php?id=intelppm.sys

dump_storahci.sys Thu Jul 26 04:30:35 2012 (5010ABCB)
driver created to provide disk access during crash dump file generation
http://www.carrona.org/drivers/driver.php?id=dump_storahci.sys

RtkBtfilter.sys Thu Jul 26 05:16:50 2012 (5010B6A2)
Filter Driver for the Realtek Bluetooth Chip[br]lenovo: Realtek Bluetooth 4.0 driver for Windows 8 (64-bit)
http://www.carrona.org/drivers/driver.php?id=RtkBtfilter.sys

btmaux.sys Mon Aug 27 06:21:13 2012 (503AF5B9)
Intel Bluetooth Auxiliary Service
http://www.carrona.org/drivers/driver.php?id=btmaux.sys

btath_bus.sys Mon Jan 21 10:18:42 2013 (50FD07F2)
Atheros BlueTooth driver
http://www.carrona.org/drivers/driver.php?id=btath_bus.sys

bwcW8x64.sys Wed Feb 13 18:25:48 2013 (511BCC9C)
Killer Bandwidth Control Filter Driver
http://www.carrona.org/drivers/driver.php?id=bwcW8x64.sys

akw8x64.sys Wed Aug 28 22:32:15 2013 (521E5E4F)
Qualcomm Atheros Killer driver
http://www.carrona.org/drivers/driver.php?id=akw8x64.sys

nvlddmkm.sys Thu Aug 29 23:39:12 2013 (521FBF80)
nVidia Video drivers
http://www.carrona.org/drivers/driver.php?id=nvlddmkm.sys

nvpciflt.sys Thu Aug 29 23:39:37 2013 (521FBF99)
nVidia 3D Vision Display driver
http://www.carrona.org/drivers/driver.php?id=nvpciflt.sys

igdkmd64.sys Fri Sep 26 15:42:04 2014 (54256D2C)
Intel Graphics driver
http://www.carrona.org/drivers/driver.php?id=igdkmd64.sys

Debug session time: Sat Jan 31 23:57:48.707 2015 (UTC + 1:00)
Loading Dump File [C:\Users\Mihael\SysnativeBSODApps\020115-7781-01.dmp]
Built by: 9200.16384.amd64fre.win8_rtm.120725-1247
System Uptime: 0 days 0:13:00.402
*** WARNING: Unable to verify timestamp for btfilter.sys
*** ERROR: Module load completed but symbols could not be loaded for btfilter.sys
Probably caused by : usbhub.sys
BugCheck 9F, {3, fffffa801074b060, fffff88000a877e0, fffffa800e3feb40}
BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)
Bugcheck code 0000009F
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: fffffa801074b060, Physical Device Object of the stack
Arg3: fffff88000a877e0, nt!TRIAGE_9F_POWER on Win7 and higher, otherwise the Functional Device Object of the stack
Arg4: fffffa800e3feb40, The blocked IRP
BUGCHECK_STR: 0x9F
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCKET_ID: 0x9F_3_RtkBtfilter_IMAGE_usbhub.sys
MaxSpeed: 2600
CurrentSpeed: 2594
BiosVersion = 4.6.5
BiosReleaseDate = 02/01/2013
SystemManufacturer = CLEVO
SystemProductName = P15xEMx
??????????????????????????????????????????????????????????????????????????????????????``


--- E O J --- 2015 Feb 03 10:57:50 AM _88-dbug Copyright 2012 Sysnative Forums
--- E O J --- 2015 Feb 03 10:57:50 AM _88-dbug Copyright 2012 Sysnative Forums
--- E O J --- 2015 Feb 03 10:57:50 AM _88-dbug Copyright 2012 Sysnative Forums

http://www.eightforums.com/bsod-crashes-debugging/60935-bsod-after-bios-update-fresh-install-windows-8-a.html
Relevancy 67.94%

Hi there,
I have been getting frequent BSOD's on my 18 month old Dell XPS 17 L701x laptop, so I completely wiped the hard drive and reinstalled windows 7 on it. However the BSOD still persists. The error message given states, 'STOP Error 0x000000D1: DRIVER_IRQL_NOT_LESS_OR_EQUAL'. I am running Windows 7 home premium 64bit OEM. I will attach the dump files to this post.
Thanks, Snakehips.

Attachment 216227

A:Persistant BSOD even after HDD reformat and fresh windows install

Hi Snakehips. Your attachment is invalid. Please follow the http://www.sevenforums.com/crashes-d...tructions.html

Thanks.

http://www.sevenforums.com/bsod-help-support/234583-persistant-bsod-even-after-hdd-reformat-fresh-windows-install.html
Relevancy 67.94%

Okay, so ever since my fresh windows 7 install I've been getting a BSOD that happens about a couple times a week. The thing is, it never happens when I'm using the computer. I've noticed it only happening when I leave the computer for a long period of time without putting it in sleep mode. The computer is only 4 months old, an Asus g73jw. Running windows 7 pro 64bit.

BSOD error report:

A:Recurring BSOD, recently fresh windows install

  
Quote: Originally Posted by Vacu1ty


Okay, so ever since my fresh windows 7 install I've been getting a BSOD that happens about a couple times a week. The thing is, it never happens when I'm using the computer. I've noticed it only happening when I leave the computer for a long period of time without putting it in sleep mode. The computer is only 4 months old, an Asus g73jw. Running windows 7 pro 64bit.

BSOD error report:



No DMP files included in the upload please try this method.


To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:

* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.

To ensure minidumps are enabled:

Go to Start, in the Search Box type: sysdm.cpl, press Enter.
Under the Advanced tab, click on the Startup and Recovery Settings... button.
Ensure that Automatically restart is unchecked.
Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
OK your way out.
Reboot if changes have been made.

http://www.sevenforums.com/bsod-help-support/163061-recurring-bsod-recently-fresh-windows-install.html
Relevancy 67.94%

I am having continuous issues with a BSOD. Here is a little basic info:
Windows 7 Ultimate 64 bit (one week old install)
version of windows is a OEM upgrade (installed fresh from formatted hard drive)
Computer is about 2.5 years old.
Hard drive is 3 months old
RAM is one month old.

I am attempting to update windows via Windows Update. I have also tried to update drivers using Raxco software's Perfect Updater. I can't seem to keep the computer running long enough to get anything updated. Attached is the requested files. Thanks in advance for your assistance.

A:BSOD while trying to update drivers and windows on fresh install

Test your RAM using Memtest86+. Let it run until 6-8 passes have completed or errors have been found.
RAM - Test with Memtest86+

Run an sfc/scannow command in an elevated command prompt at boot. If errors are found, run it twice more with each scan followed by a reboot.
SFC /SCANNOW : Run in Command Prompt at Boot

Run a chkdsk on the system partition to check for bad sectors or system errors.
Disk Check

This may be some sort of hardware issue hence the Memtest & chkdsk.

http://www.sevenforums.com/bsod-help-support/223772-bsod-while-trying-update-drivers-windows-fresh-install.html
Relevancy 67.94%

Hi everybody I bought a new motherboard Gigabyte A-DS P and DDR GB Team Group MHz CL I did a fresh installation of Windows to have a clean installation windows fresh new and with BSOD Random install motherboard of drivers and since then I have regularly BSOD Here is my configuration Motherboard Gigabyte A-DS P CPU AMD Phenom II X Graphic card HIS Radeon HD Power Supply OCZ W Memory GB x GB DDR Team Group Mhz CL Main hard drive where windows is installed SSD Samsung EVO GB SATA hard drives Seagate ST AS TB and Seagate ST DM TB USB HDD WD EAVS TB and Seagate Backup Random BSOD with new motherboard and windows fresh install TB both with external power supply always connected Windows bit I think that I have the most recent drivers for all my devices So I don't understand where it comes from It happens randomly when I'm Random BSOD with new motherboard and windows fresh install on internet or Random BSOD with new motherboard and windows fresh install word or when i'm listening music It never happens when i'm playing games I join the report of DM Log collector Tool GLOUBI-PC- - - zip I also put the report of WhoCrashed see below Do you have an idea of the problem What could I do to solve it Thank you very much WhoCrashed Crash dumps are enabled on your computer On Tue - - GMT your computer crashed crash dump file C Windows Minidump - - dmp This was probably caused by the following module ntoskrnl exe nt x DCA Bugcheck code x A x xFFFFF C B x x Error MEMORY MANAGEMENT file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System Bug check description This indicates that a severe memory management error occurred This might be a case of memory corruption More often memory corruption happens because of software errors in buggy drivers not because of faulty RAM modules The crash took place in the Windows kernel Possibly this problem is caused by another driver that cannot be identified at this time On Tue - - GMT your computer crashed crash dump file C Windows memory dmp This was probably caused by the following module ntkrnlmp exe nt KeBugCheckEx x Bugcheck code x A x xFFFFF C B x x Error MEMORY MANAGEMENT Bug check description This indicates that a severe memory management error occurred This might be a case of memory corruption More often memory corruption happens because of software errors in buggy drivers not because of faulty RAM modules The crash took place in the Windows kernel Possibly this problem is caused by another driver that cannot be identified at this time On Sun - - GMT your computer crashed crash dump file C Windows Minidump - - dmp This was probably caused by the following module ntfs sys xFFFFF DD C Bugcheck code x xA A F D xB B BDEE D xFFFFF DD C x Error CRITICAL STRUCTURE CORRUPTION file path C Windows system drivers ntfs sys product Microsoft Windows Operating System company Microsoft Corporation description NT File System Driver Bug check description This indicates that the kernel has detected critical kernel code or data corruption This might be a case of memory corruption More often memory corruption happens because of software errors in buggy drivers not because of faulty RAM modules The crash took place in a standard Microsoft module Your system configuration may be incorrect Possibly this problem is caused by another driver on your system that cannot be identified at this time On Mon - - GMT your computer crashed crash dump file C Windows Minidump - - dmp This was probably caused by the following module ntoskrnl exe nt x DCA Bugcheck code x xFFFFF F x xFFFFF BF E x Error PAGE FAULT IN NONPAGED AREA file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System Bug check description This indicates that invalid system memory has been referenced This appears to be a typical software driver bug and is not likely to be caused by a hardware problem T... Read more

A:Random BSOD with new motherboard and windows fresh install

Hi Gloubi, unfortunately it looks like someone sold you a license that is used to activate volume copies of Windows for businesses. If this is a PC on a legitimate volume license, I would contact your tech support for help. If its not, we will need you to contact the place you obtained this copy of windows and demand a legitimate product key.

After obtaining a legitimate product key, change your product key and upload a new DM log
Product Key Number - Change in Windows 8


Code:
<ActivePartialProductKey>9D6T9</ActivePartialProductKey>
<ActiveProductKeyChannel>Volume:GVLK</ActiveProductKeyChannel>
<ActiveSkuDescription>Windows(R) Operating System, VOLUME_KMSCLIENT channel</ActiveSkuDescription>


Since you have a lot of memory_corruption BSOD, I would run memtest86+
RAM - Test with Memtest86+ - Windows 7 Help Forums

I will need a DM log that shows a legitimate copy of Windows to help you further.

http://www.eightforums.com/bsod-crashes-debugging/64824-random-bsod-new-motherboard-windows-fresh-install.html
Relevancy 67.94%

Hello
I need some help identifying my laptop problems, I have a fresh windows 7 install, but the BSOD is preventing me from making any tests. I managed to copy minidumps from windows using Hirens BootCD and do a CPUZ report - attached in this message. Please, help me identify my BSOD!
 
Minidumps larger than attachment requirements:
http://www.mediafire.com/download/hb349mhpxwqeqi6/Minidump.zip

A:Constant BSOD, fresh windows install, please help identify

Data submitted reflects XP O/S.
 
Louis

http://www.bleepingcomputer.com/forums/t/552303/constant-bsod-fresh-windows-install-please-help-identify/
Relevancy 67.94%

OS - Windows x Original installed OS on system - Windows OEM Refurbished days Have you re-installed the OS Yes AMD Phenom II X T ATI Radeon HD I'm not sure about the motherboard it may be on the listing same with power supply Here is the exact computer I purchased although mine was refurbished from Best Buy online HP - HP Pavilion Elite HPE- f Desktop PC customer reviews - product reviews - read top consumer ratings I purchased it roughly weeks ago from Best Buy online and picked it up on the th of January The problems have been fairly persistent since the th They errors have fresh various Windows codes on BSOD install with [SOLVED] 7 ranged from things like PFN LIST CORRUPT SYSTEM SERVICE EXCEPTION MEMORY MANAGEMENT IRQL NOT LESS OR EQUAL with various codes b e a a e files such as luafv sys nwifi sys mouclass sys chrome exe storport sys have been identified as culprits I ran sfc scannow and got Windows Resource Protection did not find any integrity violations memtest showed no errors nor did Windows memory test or HP's provided memory diagnostic although I [SOLVED] Windows 7 BSOD with various codes on fresh install did receive some errors with the HP tool saying DIMM or might be the problem so I unseated everything made sure it was clean put stick in DIMM and tested it it passed Stick in DIMM passed All sticks passed individually but when I put them back in together I got another error saying DIMM or DIMM was the problem The test kept failing on a quot march test quot So once it said DIMM or then it said DIMM or So I unseated and checked them all one more time put them all in together and they passed Then they passed Windows memory test again and memtest I ran HP's provided Vision Diagnostics and no problems were found with the fan graphics card memory sound hard drive or any other components It got a full pass Initially when the machine began to crash it would not come back on correctly It would reboot during startup repeatedly wouldn't load safe mode I couldn't boot from the recovery CD or anything until I would unseat the graphics card and unplug the hard drive and [SOLVED] Windows 7 BSOD with various codes on fresh install plug it back in then turn the pc back on After unseating the ram and testing it and reseating it again this wasn't a problem the computer would come back on after crashes except a few times when strange characters appeared during startup and I couldn't even get into a boot menu or load any recovery at all I decided maybe I had really messed up my installation so I did a complete factory restore I changed NOTHING after the restore but instead installed a game to try and stress every component of the system The game ran fine Then eventually after a few hours a crash might happen once or twice and I'd see BSOD The errors seem sporadic At other times they would happen during browsing or even just trying to open a folder to get this report together I had to reboot about times and do a system restore to be able to send this report The mini dumps are included but only one is from my current configuration since I had to restore just to get back online However the configuration I have now after restore is nearly identical that the one before so the problem is probably the same I installed updated wifi and nic drivers from Realtek and RA Link and began to have boot issues preventing me from even restoring After booting into safe mood doing a restore that reported it didn't work but in fact did complete the restore to an earlier point here I am posting this I made a backup image of the system to restore from with all of my programs installed but when I attempted to restore it it only listed the backups from my Vista machine which were stored on the same external drive I was able to mount the VHD as a volume but that only let me retrieve files I still had to reinstall everything I wish there were an easier way to make a full image I could just reload onto the system Anyway the included perfmon report says everythin... Read more

A:[SOLVED] Windows 7 BSOD with various codes on fresh install

Hi -

One of the 2 dumps was corrupted. The remaining dump gave no clues.

See if Driver Verifier can be of help -

Driver Verifier -- http://sysnative.com/0x1/driver_verifier.htm

Windbg Logs
--> http://sysnative.com/...99-dbug_quantumjim_Windows7x64_02-14-2011_jcgriff2_.txt
--> http://sysnative.com/...99-dbug_quantumjim_Windows7x64_02-14-2011_jcgriff2_..zip

Regards. . .

jcgriff2


`


BSOD BUGCHECK SUMMARY

Code:

??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Debug session time: Sun Feb 13 20:00:08.120 2011 (GMT-5)
System Uptime: 0 days 2:15:03.196
Probably caused by : ntkrnlmp.exe ( nt!KeAcquireInStackQueuedSpinLockAtDpcLevel+4f )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0xA
PROCESS_NAME: chrome.exe
FAILURE_BUCKET_ID: X64_0xA_nt!KeAcquireInStackQueuedSpinLockAtDpcLevel+4f
Bugcheck code 0000000A
Arguments 00000000`00000020 00000000`00000002 00000000`00000001 fffff800`02a8644f
SystemManufacturer = Hewlett-Packard
SystemProductName = HPE-410f
??????????????????????????????????????????????????????????????????????????????????????``

http://www.techsupportforum.com/forums/f299/solved-windows-7-bsod-with-various-codes-on-fresh-install-550607.html
Relevancy 67.94%

I was getting random BSOD while playing Battlefield and decided to try a fresh install of Windows The BSOD happened after hours after the fresh install and the I only have Battlefield and a handful 3) of Windows after install Battlefield playing (while fresh 7 BSOD of other programs installed The BIOS and all drivers are up to date At first I thought it was because I have unmatched RAM all sticks are DDR but are PC and the other are PC I ran passes of memtest and it passes Ran Windows memory diagnostic and it passed I've ran furmark for hours to stress the GPUs and everything was ok I then ran Prime to stress the CPU overnight and no BSOD It only happened that one time My system specs are- OS- Windows Ultimate x OEM CPU- AMD Phenom II BE GHz v Motherboard- Asus Crosshair IV Formula BIOS RAM- x GB GB total G Skill Ripjaws DDR x GB PC x GB PC Graphic Card s - x XFX HD Crossfire drivers CAP Sound- Onboard X-Fi Storage- OCZ Solid GB SSD Gb s boot drive TB Samsung F RPM system storage PSU- Cougar SX W I'm attaching dump files and the System Health Report It says that I have no anti-virus but I'm using Microsoft Security Essentials BSOD after fresh install of Windows 7 (while playing Battlefield 3)

A:BSOD after fresh install of Windows 7 (while playing Battlefield 3)

  
Quote: Originally Posted by adamxatomic


I was getting random BSOD while playing Battlefield 3 and decided to try a fresh install of Windows 7. The BSOD happened after 2 hours after the fresh install and the I only have Battlefield 3 and a handful of other programs installed.

The BIOS and all drivers are up to date. At first I thought it was because I have unmatched RAM (all 4 sticks are DDR3 1600, but 2 are PC10700 and the other 2 are PC12800). I ran 6 passes of memtest and it passes. Ran Windows memory diagnostic and it passed.

I've ran furmark for 2 hours to stress the GPUs and everything was ok. I then ran Prime95 to stress the CPU overnight and no BSOD. It only happened that one time.

My system specs are-
OS- Windows 7 Ultimate x64 OEM
CPU- AMD Phenom II 955 BE @3.6GHz 1.475v
Motherboard- Asus Crosshair IV Formula (3027 BIOS)
RAM- 4x2GB (8GB total) G.Skill Ripjaws DDR3 1600 (2x2GB PC10700 2x2GB PC 12800)
Graphic Card(s)- 2x XFX HD 6850 Crossfire (12.1 drivers 11.10 CAP)
Sound- Onboard X-Fi
Storage- OCZ Solid 3 120GB SSD 6Gb/s (boot drive) / 2TB Samsung F4 5400 RPM (system storage)
PSU- Cougar SX850 850W

I'm attaching dump files, and the System Health Report.
(It says that I have no anti-virus, but I'm using Microsoft Security Essentials.


It is much easier to find patterns, etc, when there are more than one crash. We prefer you wait until you have at least two so that if one is corrupt the other probably wont be.
Windows memory diagnostics does not stress the memory enough so we recommend Memtest
This on DMP is inconclusive
I suggest the following

If you are overclocking anything reset to default before running these tests.
In other words STOP!!!
1-Memtest.





Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.



RAM - Test with Memtest86+

2-Driver verifier






Quote:
Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

So, I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Special Pool", "Force Pending I/O Requests" and "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continu... Read more

http://www.sevenforums.com/bsod-help-support/211591-bsod-after-fresh-install-windows-7-while-playing-battlefield-3-a.html
Relevancy 67.51%

I'm sorry but I'm new of SSD into restarts Fresh 8.1, on BSOD install Fresh at this but I'm at a loss at what I'm suppose to do Just got in the mail ssd's and the HD video card along Fresh install on Fresh SSD of 8.1, restarts into BSOD with a copy of windows complete retail My boot ssd one Fresh install on Fresh SSD of 8.1, restarts into BSOD I'm trying to install on is a gb Mushkin and the other is the one I was going to put games on the gb Mushkin So I hooked the gb one up and put in my install disk for the bit of windows It went through the install fine then it said it needed to restart to complete and when it restarted it gave me the black screen of death It sat there for over minutes then the screen turned to a yellowish orange So I formatted the ssd reinstalled fresh again Same thing I then tried the gb thinking maybe I had a bad ssd Same thing Then I tried an old gb Seagate that I knew worked but I formatted it and installed Same thing So back to the gb I went formatted reinstalled then it did the black screen again So I tried booting over a couple times till it gave me the option to start in safe mode with networking It started in a black screen with the blue windows logo and stayed there for an hour I then tried the command prompt methods of BOOTREC FIXMBR BOOTREC FIXBOOT BOOTREC REBUILDBCD and restarted with same black screen after the rebuildbcd it said copies of windows So I tried to start using the install CD as a recovery drive it brought up the option to install windows I'm not sure how I can get dumps or test stuff if there is no way for me to even get to the actual explorer other than the black screen or the black screen with the blue window logo or even he more rare black screen with underscore blinking Can someone please help me out because after two days I'm at a loss here thanks Mitchell

A:Fresh install on Fresh SSD of 8.1, restarts into BSOD

Hi MitchellTyner,

First, I looked up your motherboard and it does not formally support any OS beyond Windows 7 so that could be an issue right off the bat; however, if you are running the latest BIOS, you could try and set your BIOS to default values and try that clean install without the 7870 first. Then, if it works, you could try installing the 7870 thereafter. BTW, good luck in finding all the correct drivers for your older hardware as well.

Clean Install - Windows 8

my2cents

http://www.eightforums.com/bsod-crashes-debugging/43370-fresh-install-fresh-ssd-8-1-restarts-into-bsod.html
Relevancy 67.08%

Hey,

I have been asked by a friend to help with their BSOD issues and am having trouble finding the cause, they have just recently upgraded their Motherboard, CPU as well as installing a new SSD and HDD, they received the first BSOD about 2 days after re installing windows after installing the new components. I believe it may be to do with the Netgear wireless dongle but id like to confirm.

I have attached the .zip from SF Diagnostic Tool

Thanks in advanced,
prizna

A:Random BSOD after installing new components/fresh install of Windows

Debug blames iusb3xhc.sys

Try updating the usb3 driver: Intel(R) USB 3.0 eXtensible Host Controller Driver
Download from Intel: http://downloadcenter.intel.com/

Let us know how it goes?

http://www.sevenforums.com/bsod-help-support/351352-random-bsod-after-installing-new-components-fresh-install-windows.html
Relevancy 67.08%

The BSOD is so fast I cant get the exact error number but I believe its a bunch of zeros than F4. I believe its just a driver issue somewhere but can't figure out what is causing it. This is a custom built pc that was working fine with windows 7 ultimate on it than i crashed it to put a fresh windows install on it now I cant get it to work again please help. attatched the zip dump report. Thank you guys.

http://www.sevenforums.com/bsod-help-support/393103-fresh-install-windows-7-ultimate-bsod-every-couple-minutes.html
Relevancy 67.08%

Hello everyone,

I've just installed a new hard drive and a fresh copy of Windows 7 Ultimate x64 on it, and I just received two BSODs within minutes of each other, citing ntoskrnl.exe with SYSTEM_SERVICE_EXCEPTION on BlueScreenView. I had periodical blue screens before my last HDD died so it's most likely something else causing it, maybe hardware... but not sure how to tell what. I've attached the necessary files.

Is Windows 7 . . .
- x64
- the original installed OS on the system? Yes
- Full retail version

- What is the age of system (hardware)? About 5 years
- What is the age of OS installation (have you re-installed the OS?) Two days

Thanks in advance for the help!

A:BSOD on a new Hard Drive, fresh install of Windows 7 Ultimate x64

Code:
ASACPI.sys Sun Mar 27 20:30:36 2005 (42476C4C)
Older versions of ASACPI.SYS are a known BSOD problem on Windows 7. Update the driver by:Going to the Asus motherboard support site
When you reach the website:
Scroll down the page and click Utilities
Hold Ctrl and press f (ctrl+f) to enter the browser's find feature
Search for "ATK0110 driver for WindowsXP/Vista/Win7 32&64-bit" (without quotes)
Download and install the driver.
After installation is complete, verify that it installed correctly.Click Start Menu
Click My Computer
Go to C:\WIndows\System32\drivers\
Verify that the ASACPI.SYS file is dated 2009 or newer (2010,etc.)
If you need help, please fill in your system specs in your profile and not in a post in this thread: System Info - See Your System Specs

http://www.sevenforums.com/bsod-help-support/236249-bsod-new-hard-drive-fresh-install-windows-7-ultimate-x64.html
Relevancy 67.08%

Hi all been browsing this forum for a couple days to try and fix my problem - - Fresh Install(s) Repeated Windows Corrupt/Crash/BSoD(?) 7 based off other posts but I am at a loss I ordered Windows 7 Fresh Install(s) - Corrupt/Crash/BSoD(?) - Repeated my PC online from iBuyPower March and it came pre-loaded with Windows Home Premium Windows 7 Fresh Install(s) - Corrupt/Crash/BSoD(?) - Repeated bit My PC ran error-free for months until about days ago it just would not start up It went directly to Startup Repair and would say it cannot Windows 7 Fresh Install(s) - Corrupt/Crash/BSoD(?) - Repeated fix the problem ask me to restart pc and repeat the same thing After multiple Fresh installs due to BSoDs Corrupts I am at a point where I haven't had a BSoD for a number of hours BSoD Errors Received Current Install Code KERNEL DATA INPAGE ERROR STOP error x A means that the requested page of kernel data from the paging file could not be read into memory UNMOUNTABLE BOOT VOLUME STOP error xED means that the I O subsystem attempted to mount the boot volume and it failed DRIVER POWER STATE FAILURE STOP error x F means that the driver is in an inconsistent or invalid power state STATUS SYSTEM PROCESS TERMINATED STOP error xC A means that an error has occurred in a crucial user-mode subsystem Testing Scans I have run every quot Deep Scan quot and quot Fix Repair quot associated with all my system repair cleaner defrag programs listed in my attachments Memtest ran for passes complete No errors CHKDSK f r ran to completion Did not see results C Windows system gt sfc scannow Beginning system scan This process will take some time Beginning verification phase of system scan Verification complete Windows Resource Protection did not find any integrity violations Notes My PC is AHCI compatible but in my BIOS I set storage config to Enhanced IDE and Chipset configured to IDE as well My Sound Card Sound Blaster X-Fi Xtreme Audio is connected but I am unable to install drivers from Creative com Cannot detect supported device error and the CD Drivers are wrong for Win or Device I have not installed any updates through Windows Update yet Automatic Updates Off System Specs Code - Windows -bit - Original Installed OS - OEM - Only have Reinstallation DVD - System Age Months - Fresh Install OS lt hours

A:Windows 7 Fresh Install(s) - Corrupt/Crash/BSoD(?) - Repeated

Updated Thread, hoping it's better formatted for review...

Thanks

http://www.sevenforums.com/bsod-help-support/166249-windows-7-fresh-install-s-corrupt-crash-bsod-repeated.html
Relevancy 67.08%

hi
i recently bought an asus k42ja-vx032d laptop. From day 1 I have been getting
random bsods. I have tried memtest 86+, windows memory diagnostic tool and ran orthos for 2 hrs. Seems like my memory is ok. I have installed the drivers listed on Asus webpage. Also I haven't installed any antivirus. I have installed windows several times but have got bsod on fresh install also.
Please Help!

? OS - Vista/ Windows 7 ?-----win7 ultimate
? x86 (32-bit) or x64 ?--------x64
? What was original installed OS on system?-----clean install
? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)?-----retail
? Age of system (hardware)------brand new
? Age of OS installation - have you re-installed the OS?------several times
? CPU------i5-460m
? Video Card------ati 5730 2gb vram
? MotherBoard------asus
? Power Supply - brand & wattage----????

here's the webpage of my laptop
ASUSTeK Computer Inc. - Notebooks - ASUS K42Ja

thanks in advance!!

A:BSOD in fresh win7 install [moved from Vista/ Windows 7]

please i could use some help...

http://www.techsupportforum.com/forums/f299/bsod-in-fresh-win7-install-moved-from-vista-windows-7-a-549705.html
Relevancy 67.08%

My issue is a full system hang without BSOD no mem dump It seems to occur while playing Flash install 7 [SOLVED] fresh Windows System no hangs BSOD, games like Zynga Poker Windows hangs completely no cursor movement no recovery I let one hang sit for nearly an hour before hard-resetting O S - Windows Professional SP amd HW age - Less than year Planned reinstallation less than a week ago HW change previous to issue - Remove GB Seagate SATA drive install TB WD SATA drive Remove [SOLVED] System hangs no BSOD, fresh install Windows 7 OCZ SSD as OS drive History of PC and issue The PC is a self built machine specs in drop down completed less than a year ago First installation of Windows ran without issue Second installation of Windows to SSD was temporary whilst I organized consolidated and backed up my files from HDDs No issues Third installation current install on Starting on the system suffered from a Hang while playing Zynga Poker with my son Dismissed as a one-off issue I was spending time with my son teaching him about computer hardware and playing Zynga Poker with him the PC suffered an abrupt shutdown immediate off After troubleshooting I found what appeared to be the culprit in a loose SATA power connection to my modular PSU SeaSonic X The immediate shutdowns ceased but the hangs still occur What I have done Troubleshooting and repair Full gamut of hardware diagnostics HDD - WD Caviar Black SATA GB OS Drive - Checked and passed HDD - WD Caviar Black SATA TB - Checked and passed Memory - GB Kingston HyperX Blu - Tested extensively and passed CPU - AMD Phenom T x - OCCT for hours pass Prime DOS - pass Full tear-down inspection of HW components Full test of PSU voltages idle and under load with Multimeter Steady voltages well within ATX parameters - pass Software Diagnostics and Drivers chkdsk c f r - No errors reported SFC scannow - No violations or file corruption found Update Video drivers Update Chipset drivers Update SATA drivers Uninstall and reinstall Flash Player twice Went through Event Viewer and checked repaired errors ToDo list Zero write and Fresh installation of Windows Attached are the output files of the JCGriff app Even though there are no dumps All system events are post-last crash I cleared the Event Viewer Log files earlier today It truly appears to me that the system hangs are only occurring when playing Flash based Apps Zynga Poker I have not to my knowledge had one single crash or hang since this computer was built until now If you need more info please ask If I don't find resolution soon I am going to procede with the wipe and reinstallation Thank you in advance for your time and attention GZ

A:[SOLVED] System hangs no BSOD, fresh install Windows 7

Things I have done to this point...

Downgrade to Flash 11.2 from 11.3.
Downgrade from IE9 to IE8
Run further HW tests to pinpoint any HW failures.
Ran multiple malware scans (MSE/ESET Online/MBAM)

All above steps did not resolve the issue.

Replace my newer SeaSonic X650 modular PSU with my old Corsare TX850.
Complete disassembly and re-build of my PC with physical inspection of each component.

I have yet to have a freeze/hang since replacing the PSU. I will give it a few days before I make any assumptions.

http://www.techsupportforum.com/forums/f299/solved-system-hangs-no-bsod-fresh-install-windows-7-a-661278.html
Relevancy 67.08%

Installed Windows on my custom built computer Never had any issues with windows until I made the upgrade from to Since then been experiencing frequent BSOD shortly after start From what I can tell the crash does not discriminate whether I am watching videos doing homework or playing games it will crash I ran Windows Memory Diagnostics 10 windows shortly BSOD, boot; Install after Frequent Fresh and was given quot Hardware problems were detected quot So I ran memstest where no errors were found after passes I also checked HyperX RAM voltage specification and Frequent BSOD, shortly after boot; Fresh windows 10 Install according to MSI program was given a value within its range V I have a separate hard-drive with Fedora installed and I'm able to use the computer with no errors what so ever I would at least assume if hardware were the case it would be cross platform but hey I'm not the expert you guys are CPU I K MOTHERBOARD MSI Z GAMING RAM HyperX Mhz OS Windows x zip contains the files as explained in the post instruction tutorial Thank you for the help

A:Frequent BSOD, shortly after boot; Fresh windows 10 Install

Hello Ohmnuu and welcome to 10forums!

I would recommend that you run memtest86+ for at least 8 passes:
MemTest86+ - Test RAM

And run "sfc /scannow" from elevated command prompt, right click cmd and select run as administrator.

Cheers, Boris

http://www.tenforums.com/bsod-crashes-debugging/43820-frequent-bsod-shortly-after-boot-fresh-windows-10-install.html
Relevancy 67.08%

Hey guys! I have been having an issue with my desktop ever since I moved 3 months ago. I recently did a fresh install of Windows 7 and I am still getting the same blue screen problem. So, it's obviously something hardware related, which I should have thought of earlier, but I can't quite figure out what it is. The message says:

System_Service_Exception

0x0000003b

I have looked online and everything either points to the firewire card or the graphics card. I found a hotfix that claimed it would fix the firewire driver and it just said "update not applicable."

It's been difficult for me to troubleshoot this problem because it does it randomly. In fact, I re-installed windows 4 days ago, and it has only happened to me twice since then, but it's still the same message as before the re-installation.

Any help would be greatly appreciated! Thanks in advanced!

-Kevin

A:Random BSOD even after a fresh re-install of Windows, Error 0x0000003b

Please follow these instructions on how to post dump files.

Blue Screen of Death (BSOD) Posting Instructions

http://www.sevenforums.com/bsod-help-support/325926-random-bsod-even-after-fresh-re-install-windows-error-0x0000003b.html
Relevancy 67.08%

I built up a new PC before Christmas. These were the components:

Asus P8Z77-V Motherboard
Intel i5 3570K 3.4GHz
2 x G-Skill 8GB DDR3 1600Mhz
PowerColor HD 6870 1GB GDDR5 Dual DVI HDMI PCI-E Graphics Card
OCZ 120GB Agility 3 SSD

Not really used it that much and have had random crashes since built. Today, I decided to start afresh and reformatted the C drive and re-installed Windows. Although the OS installed without a hitch, at various times throughout the Windows Update process, the machine would crash a BSOD would appear.

I have attached the files as requested.

Can anyone advise me on what is the best approach to resolving this issue?

Cheers

Darren

A:Windows 7 - Fresh Install BSOD whilst applying windows updates

Hello DarrenF.

Four crashes, four different stopcodes.

Code:
BugCheck 34, {50853, fffff8800317e738, fffff8800317df90, fffff80002cd1eee}

Probably caused by : ntkrnlmp.exe ( nt!ExAcquireResourceSharedLite+4e )

Followup: MachineOwner
---------
BugCheck 1E, {ffffffffc0000005, fffff80002c8e284, 0, ffffffffffffffff}

Probably caused by : ntkrnlmp.exe ( nt!SwapContext_PatchXRstor+0 )

Followup: MachineOwner
---------
BugCheck 1A, {31, fffffa800ef4fac0, fffff8800e0ed000, fffff8a00a7584e0}

Probably caused by : ntkrnlmp.exe ( nt! ?? ::NNGAKEGL::`string'+7271 )

Followup: MachineOwner
---------
BugCheck 3B, {c0000005, fffff960000f6b32, fffff8800785ffa0, 0}

Probably caused by : win32k.sys ( win32k!FreeObject+12 )

Followup: MachineOwner
---------
Whereas ntkrnlmp.exe and win32k.sys, none of them cannot be the real probable cause of a crash. Do these tests, one by one.

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

Stress test the CPU.
Hardware - Stress Test With Prime95

Enable Driver Verifier to monitor the drivers.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

Let us know the results, with the subsequent crash dumps, if any.

http://www.sevenforums.com/bsod-help-support/273552-windows-7-fresh-install-bsod-whilst-applying-windows-updates.html
Relevancy 66.65%

Problem XP fails to start in any mode XP has been reloaded from an image with no change in situation I was reimaging the machines anyway I have not yet had a successful boot since reimaging and Windows ends XP) XP in startup and install BSOD. fails Solved: (Fresh of hence XP mini setup has not completed the image was Solved: Windows XP startup fails and ends in BSOD. (Fresh install of XP) prepared using sysprep to allow it to be rolled out to multiple machines These machines are connected to Solved: Windows XP startup fails and ends in BSOD. (Fresh install of XP) an AD Domain Currently I m running memtest from Knoppix Knoppix Solved: Windows XP startup fails and ends in BSOD. (Fresh install of XP) booted with only one error about not passing in proper display information Perhaps the graphics card is going The last file loaded in a safe mode bootup is mup sys which leads me further to believe that it s a hardware problem and that s backed up by Google I ve opened it up cleaned it out with a little make that a lot of compressed air Boy was it dusty I forgot to mention this computer is at a high school if you want an idea of what the users are like It s a magnet gifted selective enrollment for you Chicago people high school though Details Machine Dell Optiplex Series OS Windows XP SP Network Environment although link is Ethernet Realtek xx family Connected to k AD Domain around computers in total on domain Any suggestions on things to try I didn t see anything obviously wrong on the motherboard that is no exploded capicitors disconnected cables missing RAM etc I m running memtest now however we won t know the results of that until tomorrow I m going to swap out the HD with a different one and we ll see if that s any better Thanks guys nbsp

A:Solved: Windows XP startup fails and ends in BSOD. (Fresh install of XP)

https://forums.techguy.org/threads/solved-windows-xp-startup-fails-and-ends-in-bsod-fresh-install-of-xp.730524/
Relevancy 66.65%

My computer was suffering from random bsods and viruses before. I atributed the bsods to viruses, but after reinstalling windows 7, I found that the bsods still happened. It seems to happen when installing drivers, or running prime95. Booting into safe mode allows me to pretty much do anything.

When crashing, it does a slow crash, where I can move the mouse around, but the startbar and any other programs dont respond. Explorer then crashes, followed shortly by a bluescreen.

A:BSOD Installing drivers after a fresh windows install, Code 0xf4

Welcome
Sounds like a driver, take driver verifier test
Driver Verifier
I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Windows 7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.
Driver Verifier - Enable and Disable

http://www.sevenforums.com/bsod-help-support/246178-bsod-installing-drivers-after-fresh-windows-install-code-0xf4.html
Relevancy 66.65%

Getting a BSOD on a DELL XPS13 (L321X) after fresh install of Windows. I just replaced the MB with a new MB. DELL diagnostics show everything is okay.

Windows 7 - Home Premium - 64 Bit
Intel I7 - 2637M @ 1.7
4 GB onboard memory
120 GB SSD

A:BSOD - Fresh install of Windows - DELL Diagnostics show hardware is ok

Welcome to SF ccwtech .

Usually I would like to have more than one dump file so manually check the minidump folder.

Code:
C:\Windows\minidump
If dump files are present in that folder copy them to the Desktop, zip and upload in your next post.

As for the dump files uploaded;
The bug check is 0x9F which is DRIVER POWER STATE FAILURE that happens in
transitions between power states most commonly S0 (ON state) > S3 (Sleep state)
or vice-versa. You can read more HERE.

The most common cause is a device driver but sometimes it's the hardware itself
that is at fault.


Code:
DRIVER_POWER_STATE_FAILURE (9f)
A driver has failed to complete a power IRP within a specific time (usually 10 minutes).
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: fffffa8004090060, Physical Device Object of the stack
Arg3: fffff80000b9c3d8, nt!TRIAGE_9F_POWER on Win7, otherwise the Functional Device Object of the stack
Arg4: fffffa8009df5260, The blocked IRP

Code:
!irp fffffa8009df5260
>[ 16, 2] 0 0 fffffa8006e2e050 00000000 00000000-00000000
Unable to load image \SystemRoot\system32\DRIVERS\NETwNs64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for NETwNs64.sys
*** ERROR: Module load completed but symbols could not be loaded for NETwNs64.sys
\Driver\NETwNs64


Code:
lmvm NETwNs64
start end module name
fffff880`05c15000 fffff880`0649b000 NETwNs64 T (no symbols)
Loaded symbol image file: NETwNs64.sys
Image path: \SystemRoot\system32\DRIVERS\NETwNs64.sys
Image name: NETwNs64.sys
Timestamp: Sun Sep 18 12:26:48 2011
The driver is very old!

Code:
!devobj fffffa8004090060
Device object (fffffa8004090060) is for:
Cannot read info offset from nt!ObpInfoMaskToOffset
\Driver\pci DriverObject fffffa8003693e70
Current Irp 00000000 RefCount 0 Type 00000022 Flags 00001040
DevExt fffffa80040901b0 DevObjExt fffffa80040905d8 DevNode fffffa800408e6e0
ExtensionFlags (0x00000800) DOE_DEFAULT_SD_PRESENT
Characteristics (0x00000100) FILE_DEVICE_SECURE_OPEN
AttachedDevice (Upper) fffffa800408f790 \Driver\ACPI
Device queue is not busy.

Code:
!DevExt fffffa80040901b0
PDO Extension, Bus 0x2, Device 0, Function 0.
DevObj 0xfffffa8004090060 Parent FDO DevExt 0xfffffa8004088e00
Device State = PciStarted

Vendor ID 8086 (INTEL) Device ID 0091 (0x0091 Intel? Centrino? Advanced-N 6230)

Header Type 0, Class Base/Sub 02/80 (Network Controller/'Other')

Logical Device Power State: D0 < Also known as S0 see link above.
Device Wake Level: D3 (S3)
Driver Reference Table - NETwNs64.sys
Update - Download

Please update your Intel HD graphics driver as well, using this online utility:

Code:
lmvm igdkmd64
Browse full module list
start end module name
fffff880`04c24000 fffff880`057dbde0 igdkmd64 T (no symbols)
Loaded symbol image file: igdkmd64.sys
Image path: \SystemRoot\system32\DRIVERS\igdkmd64.sys
Image name: igdkmd64.sys
Browse all global symbols functions data
Timestamp: Wed Jul 20 00:39:50 2011
Driver Reference Table - igdkmd64.sys
Intel? Driver Update Utility
Keep us posted .

http://www.sevenforums.com/bsod-help-support/312702-bsod-fresh-install-windows-dell-diagnostics-show-hardware-ok.html
Relevancy 66.65%

i have got a packard bell easynote SJ51.It wont do a fresh install of windows 7 keep getting blue screen after install and with first start up ,not the hdd because i have tried 3 different hdd and was able to install windows 7 on one of these drives using a different laptop but it wouldnt start up as normal,looks to do a recovery and recovery hasn't worked.It used to have windows vista on it from default

AMD Turion 64x2
NVIDIA GEFORCE 7000M
 

https://forums.techguy.org/threads/bsod-packard-bell-easynote-sj51-fresh-install-windows-7.1000830/
Relevancy 66.22%

Any ideas? I just installed all the drivers from Dell (this is an XPSL521X) so I would guess it is one of those.

A:Fresh install of Windows BSOD during sleep - Windows 8.1

ehhh might be something with RAM like freq. or timings but for now:

Update

RtsPStor RtsPStor.sys Wed Jun 13 06:08:38 2012 (4FD866A6) <<< From Realtek's website, card reader

Update or uninstall:

stdcfltn stdcfltn.sys Fri Jul 13 19:30:14 2012 (5000AF86)

Update the video driver package for both Intel/NVIDIA from Dell if not already latest. (The crash involved dxgkrnl but that doesn't necessarily mean a video driver was at fault.)

You should attach a screenshot of CPU-Z Memory tab and one each for each stick of RAM of SPD tab.

http://www.eightforums.com/bsod-crashes-debugging/41319-fresh-install-windows-bsod-during-sleep-windows-8-1-a.html
Relevancy 65.36%

Hi hopeing someone here can help out.
 
built a new PC and installed Win 8.1 and updated it all.
had the BSOD clock watchdog time out since system 1st built
 
here is speccy link
 
http://speccy.piriform.com/results/s4AK5C6zNUVqlIYOPjkGncw
 
minidump file zip
 
https://www.mediafire.com/?5jtz00ulfjo5170
 
could only get access to 1/2 of the files ?
 
also attached is output of last 10 errors from mini tool box.
 
I am going to run 10 Pass memory test overnight to see if there are any errors with the memory.
 
Did speak to guy where i bought the components and his idea was to do full wipe and reinstall of windows.
I do try and leave this to last ditch attempt.
 
Thanks for all and any help or advice.
 
 
Ross.

A:Clock watchdog timeout win 8.1 fresh build pc and fresh windows install

A wee update.
 
ran mem test over night. did 10 passes and no errors with the memory.
 
Cheers

http://www.bleepingcomputer.com/forums/t/531175/clock-watchdog-timeout-win-81-fresh-build-pc-and-fresh-windows-install/
Relevancy 64.93%

Sounds like an issue with hardware, but I don't know what it is.

I attached the minidump and a perfmon report.

Windows 8 64 bit.
Fresh install, no new drivers besides what ever came with windows installation.

Obviously a hardware error, but what is it?

A:BSOD on fresh install of both Windows 8 and Windows 7

Hi,

The attached DMP file is of the NMI_HARDWARE_FAILURE (80) bugcheck.

This is usually a fairly difficult bugcheck to solve straight away as it's your standard hardware issue, really. It can be anything hardware related.

Also, with just one DMP, there's not much we can check for consistency. If you happen to have any more, that would be great... nevertheless, let's outline some diagnostics.

Hard disk diagnostics first -

chkdsk:


Quote:




start>search bar>type cmd right click and select run as admin

Elevated CMD should now be opened, type the following:

chkdsk x: /r

x implies your drive letter, so if your hard drive in question is letter c, it would be:

chkdsk c: /r

Restart system and let chkdsk run.




If chkdsk turns out alright, run Seatools -

SeaTools | Seagate

Run everything minus Fix All and Long Generic.

If hard disk diagnostics turn out okay, move on to memory:

Memtest86+:


Quote:




Download Memtest86+ here:

Memtest86+ - Advanced Memory Diagnostic Tool

Which should I download?

You can either download the pre-compiled ISO that you would burn to a CD and then boot from the CD, or you can download the auto-installer for the USB key. What this will do is format your USB drive, make it a bootable device, and then install the necessary files. Both do the same job, it's just up to you which you choose, or which you have available (whether it's CD or USB).

How Memtest works:

Memtest86 writes a series of test patterns to most memory addresses, reads back the data written, and compares it for errors.

The default pass does 9 different tests, varying in access patterns and test data. A tenth test, bit fade, is selectable from the menu. It writes all memory with zeroes, then sleeps for 90 minutes before checking to see if bits have changed (perhaps because of refresh problems). This is repeated with all ones for a total time of 3 hours per pass.

Many chipsets can report RAM speeds and timings via SPD (Serial Presence Detect) or EPP (Enhanced Performance Profiles), and some even support changing the expected memory speed. If the expected memory speed is overclocked, Memtest86 can test that memory performance is error-free with these faster settings.

Some hardware is able to report the "PAT status" (PAT: enabled or PAT: disabled). This is a reference to Intel Performance acceleration technology; there may be BIOS settings which affect this aspect of memory timing.

This information, if available to the program, can be displayed via a menu option.

Any other questions, they can most likely be answered by reading this great guide here:

FAQ : please read before posting




We'll start with that for now.

Regards,

Patrick

http://www.techsupportforum.com/forums/f299/bsod-on-fresh-install-of-both-windows-8-and-windows-7-a-703715.html
Relevancy 64.5%

My music computer started having problems with Windows locking drive, Windows fresh same lockups! Fresh old 98 install, up at irregular intervals and after a while the thing simply wouldn t boot up all the Fresh drive, fresh Windows 98 install, same old lockups! time The lockups had been getting worse so naturally I thought I had been vicitimized by some spyware adware virus infection and took measures After countless hours I finally gave up and bought a new hard drive installed it and put on a fresh copy of Windows SE from my recovery CD It worked fine - for a while Now the computer is exhibiting the same symptoms with the new drive as it did with the old drive I tried running the Seagate SeaTools to see if I could find any abmormalities and it checked out fine What is odd is that the computer locks up at no particular place with no particular interval of time Quite often I can t even get it past the Windows splash screen My uneducated opinion is that this has to be a hardware issue and I m feeling frustrated by my inability to isolate the problem If anyone can make suggestions as how I should proceed I would be very grateful indeed The computer has an AMD Athlon processor with MB of RAM installed on an Azza X AS motherboard by the manufacturer CyberPower Inc It clocks around ghz The computer has a CD-R RW a Toshiba DVD-ROM a floppy drive a Creative Labs SoundBlaster Live GeForce meg video adaptor a k modem a Turbolink switching power supply atx and extra cooling fans The original drive is an IBM Deskstar gig and the new drive is a Maxtor Diamondmax Plua gig The machine worked perfectly since and it s been hooked up to a network router and the internet the entire time running hours a day except during bad weather The old Pentium sitting next to it has been doing similar duty since with no problems running Windows nbsp

Relevancy 62.78%

My system info is in my profile installing Windows x Ultimate Retail Attached is all of the report info I have no idea what is going on Whenever I try to install all of the Windows updates it blue screens Then it updates, error misc when install install BSOD fresh on codes will reboot try to apply the updates BSOD on fresh install when install updates, misc error codes and blue screen again I've run Linux Server on this machine just fine so I'm fairly certain it's not a hardware issue Also this build is brand new built it a few weeks ago Thanks for your time Things I've Tried - Reinstalling Windows x Ultimate - GPU CPU and RAM stress tests all showed no signs of error - Unplugging extraneous HD's - sfc exe scannow no errors EDIT The main error code seems to be x Just got a new one that is xFC SOLUTION EDIT I disabled core unlocking and everything is magically working I suspect I had a faulty core unlocked Still doesn't explain the stress tests passing but whatever

A:BSOD on fresh install when install updates, misc error codes

This one DMP was related to the following.

STOP 0x101: CLOCK_WATCHDOG_TIMEOUT troubleshtg

http://www.sevenforums.com/bsod-help-support/231458-bsod-fresh-install-when-install-updates-misc-error-codes.html
Relevancy 62.78%

I just added a new SSD drive and installed a fresh copy of Win 7 Enterprise. I have had a previous driver issue with this system in the past. The amazing people on this site helped me work it out. Now for the life I just can't seem to sort it out again myself this time.

I ran and uploaded the SF_Diagnostic info in zip file format.

Thank you for any help that can be given.

A:BSOD playing Guild Wars 2, recent SSD install and fresh install of W7

Hello and welcome to Sevenforums.

BSOD ANALYSE


Code:
1: kd> k
Child-SP RetAddr Call Site
fffff880`02f1ffc8 fffff800`02d5c83b nt!KeBugCheckEx
fffff880`02f1ffd0 fffff800`02d271e4 nt!KipFatalFilter+0x1b
fffff880`02f20010 fffff800`02cff3ac nt! ?? ::FNODOBFM::`string'+0x83d
fffff880`02f20050 fffff800`02cfee2d nt!_C_specific_handler+0x8c
fffff880`02f200c0 fffff800`02cfdc05 nt!RtlpExecuteHandlerForException+0xd
fffff880`02f200f0 fffff800`02d0eb81 nt!RtlDispatchException+0x415
fffff880`02f207d0 fffff800`02cd3842 nt!KiDispatchException+0x135
fffff880`02f20e70 00000000`00000000 nt!KiExceptionDispatch+0xc2
Realtek wanted to do a task but it was executed for some reason. Do you have Realtek installed?

Best Regards,
Frederik.

http://www.sevenforums.com/bsod-help-support/250809-bsod-playing-guild-wars-2-recent-ssd-install-fresh-install-w7.html
Relevancy 61.92%

Note I will get an export Persistant on Install, install All Fresh BSOD New Hardware, with DM Log Collector this evening when I get home from work but I wanted to start collecting some opinions on the subject and I do have a BlueScreenView export to hand I was experiencing a BSOD during Windows Pro Fresh Install, All New Hardware, Persistant BSOD on install x installation on a freshly built computer the installation would get to and BSOD with a variety of errors mostly IRQL NOT LESS OR EQUAL After about attempts with different UEFI settings disabled Intel NIC XMP Disabled Updated UEFI etc Fresh Install, All New Hardware, Persistant BSOD on install the install stuck and I was able to load into windows thought this was pure chance In its current state the OS boots up fine and I can log in but I have about minutes before I get a BSOD the like of which are attached in a TXT file from BlueScreenView I will get the proper DM Log Collector files this evening I have tried Checking CPU temperature Degrees C Updating MB UEFIDisabling and disconnecting NICs as I found several threads on google identifying Intel NIC drivers as a possible causeReseating all hardware and power cablesRemoving each stick of RAM in turnInstalling from UEFI and LegacyDifferent media VL image Media Creation Tool Image Installing from USB amp USB PortsWith and without XMPInstalling Chipset drivers in the minute I have in the OSUninstalling video drivers in the minute I have in the OS as I remember hearing about significant issues with Windows and nVidia DriversInstalling latest nVidia Drivers in the minute I have in the OSUninstalling the Intel NIC Drivers in the minute I have in the OSRemoving DISK WD Red TB And I have now reached the point where I am running out of troubleshooting options I do not have any spare components to trial and error with except a spare GTX amp on-board graphics and another power supply I have a few things I plan to try next from reading the forums Disable all but core to highlight a CPU fault if any Manually set DRAM configuration instead of relying on XPM Install a different operating system to help identify if hardware or driver related My System Specs are as follows Motherboard Asus SABERTOOTH Z MARK CPU Intel Core i K S Stock Speeds GFX EVGA GeForce GTX SC GAMING ACX RAM GB x GB Corsair DDR Vengeance LPX Black PC - Non-ECC Unbuffered CAS - - - XMP V CMK GX M B C I have just learned that this memory is not listed in the Qualified Vendors List for my Motherboard an oversight on my part at the time of purchase perhaps the cause http dlcdnet asus com pub ASUS mb PSU W Corsair RM x SeriesOS Windows Pro x DISK GB Samsung EVO quot SSD SATA IIIDISK WD Red TB Any help with this would be much appreciated

http://www.tenforums.com/bsod-crashes-debugging/61216-fresh-install-all-new-hardware-persistant-bsod-install.html
Relevancy 61.92%

Hello from a first timer here I'm using HP pavilion DV - nr gig m gt gig I had Vista bit Prem that ran just fine and I did the Win Prem upgrade It seems to run smooth until I started getting bsod I decided to do a full install of Win Prem from my upgrade disc I booted to the cd formatted my drive partitions it created of after 64bit fresh crashes 7 BSOD install install a mb partition I did the double install way to make the activation work Ok the first install I did not update the firmware and got all kind of bsod etc problems Main culprit then was the wifi card driver I flashed my bios got BSOD crashes after fresh install of 7 64bit install all my updated drivers for everything and did another fresh install which is where I'm today I might not have installed my chip set driver first is only one point I want to point out So I only have MS Security Essentials installed simply because I thought I had this thing whiped Went to shut down and it will not shut down and will hit a BSOD and reboot It continues to do this for some reason It will reboot in safe mode I also noticed if I remove a driver and try to update it the system seems to just hang now One other note I realized last night BSOD crashes after fresh install of 7 64bit install weather or not this is a issue that I have my NAS running WD Myworldbook that I continuously connect to via WiFi I'm attaching my mini dumps and the other two errors that I saw in hopes for some kind of help cause I'm at a loss now I have seen what they have to say to a point but I can not for the life of me fix this issue I really hate to go back to Vista

A:BSOD crashes after fresh install of 7 64bit install

Maybe I should also mention, that I either pulled the drivers from there Hardware sites and if I did not, then I used Hp site. So, I have the latest intel chipset from intel, latest intel wifi from intel and latest nvidia drivers from nvidia website.

There are only like 4 or 5 things starting up. Few of them are nvida driver stuff, MS essientials, touchpad software & can't remember the other two.

This may be another issue, but I have noticed every since I have put Win7 on, while it boots, I get a pop in my speakers??

http://www.sevenforums.com/bsod-help-support/64382-bsod-crashes-after-fresh-install-7-64bit-install.html
Relevancy 61.06%

Hello forums people OS Windows professional motherboard Asus M A LT-M LE CPU AMD Athlon II x I've been wrestling with this all day Yesterday I re-installed Windows professional bit to get rid of years of clutter I was unable to install the OS with both GB sticks of RAM and my geForce video card in I took out one RAM stick and the video card and installed the OS Today I am unable to start windows with the second RAM stick or the video card in To check the RAM sticks I have put each RAM stick individually after "starting BSOD windows" install fresh during into each of the two RAM slots on the motherboard without a problem I only have the problem when both sticks are in The BSOD occurs in the exact same way as when I boot with the video card installed I get to the quot starting windows quot screen the little colored balls animate for a moment and then freeze Then I go to the bsod where I am told acpi sys is responsible The way BSOD during "starting windows" after fresh install that two pieces of hardware individually cause the same crash makes me think that it is not a problem with the video card or the motherboard BSOD during "starting windows" after fresh install physically either I have updated my BIOS today to the latest version I have run the windows startup repair from my intall CD it failed at the quot System Files Integrity Check and Repair quot test with error code x I am unable to boot in safe mode with RAM sticks or the video card I'm looking up cmd windows memory tests I can do as well as updating the chipset now I would appreciate any direction Severin EDIT I may have installed the quot debug checked quot version of windows professional I have been reading that this throws errors instead of tolerating faults like a friendly OS should

A:BSOD during "starting windows" after fresh install

Hello there!

It does sound like Hardware but the best way to test the RAM is using the program called MemTest86+ follow this article Run Hardware Diagnostic : Hardware Diagnostic | Captain Debugger (RAM and GPU)

This driver Bs_def.sys i.e. BIOS Flash Driver is a driver file from company AsusTek Computer Inc. maybe it's good idea to re-flash the BIOS.
Bugcheck:


Code:

Debug session time: Thu Nov 8 05:48:46.112 2012 (UTC + 5:30)
Loading Dump File [C:\Users\Shyam\SysnativeBSODApps\110712-4291397729-01.dmp]
Built by: 7601.17514.amd64chk.win7sp1_rtm.101119-1850
System Uptime: 49 days 16:37:00.011 (checked kernels begin at 49 days)
BugCheck 3B, {c0000420, fffff8000270a11b, fffff88007270a00, 0}
*** WARNING: Unable to verify timestamp for BS_DEF.sys
*** ERROR: Module load completed but symbols could not be loaded for BS_DEF.sys
Probably caused by : BS_DEF.sys ( BS_DEF+1109 )
Bugcheck code 0000003B
Arguments:
Arg1: 00000000c0000420, Exception code that caused the bugcheck
Arg2: fffff8000270a11b, Address of the instruction which caused the bugcheck
Arg3: fffff88007270a00, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
BUGCHECK_STR: 0x3B
PROCESS_NAME: IKernel.
FAILURE_BUCKET_ID: X64_0x3B_BS_DEF+1109
BiosVersion = 0507
BiosReleaseDate = 02/23/2010
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
??????????????????????????????????????????????????????????????????????????????????????``

*** 3rd PARTY DRIVER LIST ***


Code:


BS_DEF.sys Wed Jun 24 13:09:01 2009 (4A41D815)
HpSAMD.sys Sat May 29 00:04:43 2010 (4C000CC3)
L1C62x64.sys Wed Apr 1 10:39:17 2009 (49D2F6FD)
MegaSR.sys Tue May 19 06:55:34 2009 (4A120A8E)
SiSRaid2.sys Wed Sep 24 23:58:22 2008 (48DA86C6)
adp94xx.sys Sat Dec 6 05:18:25 2008 (4939BDC9)
adpahci.sys Tue May 1 23:00:28 2007 (46377934)
adpu320.sys Wed Feb 28 05:36:46 2007 (45E4C796)
amdsata.sys Fri Mar 19 06:24:45 2010 (4BA2CB55)
amdsbs.sys Sat Mar 21 00:06:05 2009 (49C3E215)
amdxata.sys Fri Mar 19 21:48:34 2010 (4BA3A3DA)
arc.sys Fri May 25 02:58:53 2007 (46560395)
arcsas.sys Thu Jan 15 00:55:45 2009 (496E3C39)
atikmdag.sys Fri Apr 24 16:21:57 2009 (49F199CD)
elxstor.sys Wed Feb 4 04:39:01 2009 (4988CE8D)
iaStorV.sys Fri Jun 11 06:16:52 2010 (4C11877C)
iirsp.sys Wed Dec 14 03:17:51 2005 (439F4187)
intelide.sys Sat Nov 20 12:40:11 2010 (4CE77453)
lsi_fc.sys Wed Dec 10 04:09:03 2008 (493EF387)
lsi_sas.sys Tue May 19 05:50:10 2009 (4A11FB3A)
lsi_sas2.sys Tue May 19 06:01:37 2009 (4A11FDE9)
lsi_scsi.sys Fri Apr 17 03:44:11 2009 (49E7ADB3)
megasas.sys Tue May 19 06:39:41 2009 (4A1206D5)
nfrd960.sys Wed Jun 7 02:41:40 2006 (4485EF8C)
nvraid.sys Sat Mar 20 02:29:45 2010 (4BA3E5C1)
nvstor.sys Sat Mar 20 02:16:51 2010 (4BA3E2BB)
ql2300.sys Fri Jan 23 04:35:01 2009 (4978FB9D)
ql40xx.sys Tue May 19 06:48:21 2009 (4A1208DD)
sisraid4.sys Thu Oct 2 03:26:02 2008 (48E3F1F2)
stexstor.sys Wed Feb 18 04:33:43 2009 (499B424F)
vsmraid.sys Sat Jan 31 06:53:20 2009 (4983A808)


BS_DEF.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.
http://www.carrona.org/drivers/driver.php?id=HpSAMD.sys
http://www.carrona.org/drivers/driver.php?id=L1C62x64.sys
http://www.carrona.org/drivers/driver.php?id=MegaSR.sys
http://www.carrona.org/drivers/driver.php?id=SiSRaid2.sys
http://www.carrona.org/drivers/driver.php?i... Read more

http://www.sevenforums.com/bsod-help-support/263128-bsod-during-starting-windows-after-fresh-install.html