Windows Support Forum

New build(windows 7 x64) constant bsod's HAL.DLL+12a3b ntoskrnl.exe+1

Q: New build(windows 7 x64) constant bsod's HAL.DLL+12a3b ntoskrnl.exe+1

So I recently built a friend a new computer and he has been receiving a ton of bsods I have re installed video drivers, updated windows 7. Did countless hardware test(Video ram, check memory, Cpu test) temperatures stay around 25-35 c.
Recently uninstalled all video drivers and re installed and the bsods went away for a week or so he recently got a bsod. Is this hardware or software how do I fix these errors?

Relevancy 100%
Preferred Solution: New build(windows 7 x64) constant bsod's HAL.DLL+12a3b ntoskrnl.exe+1

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Relevancy 95.89%

Hello everybody I just have this custom PC BSOD hal.dll+12a3b x64, error Windows 0x00000124 ntoskrnl.exe+748c0 for Home use I have used it around a month The PC had worked very good but weeks ago my wife had to use it for children's homework Just when she logged into her user account the BSOD appeared after around seconds the BSOD disappeared an the PC automatically restarted So she was into this loop until I told her to force shut down When I was home I ran Windows into Safe Mode and there everything was ok I thought it could BSOD Windows x64, error 0x00000124 hal.dll+12a3b ntoskrnl.exe+748c0 be a problem of RAM memory or maybe a faulty HDD I tested the RAM for about minutes and everything was ok tested the HDD with HD Sentinel software all the tests were perfect SMART indicators are also OK as expected of a nearly new HDD I think its a problem of drivers the PC has BSOD Windows x64, error 0x00000124 hal.dll+12a3b ntoskrnl.exe+748c0 a ZOGIS GT- Pci-Ex card but the mainboard Gygabyte B M-D V has its own Video Chip that is disabled on the BIOS Then I disabled the Pci-Ex and enabled the internal Video card but the result was the same BSOD Other peripherals used are a Genius USB Facecam and an EPSON L printer both are now BSOD Windows x64, error 0x00000124 hal.dll+12a3b ntoskrnl.exe+748c0 disconnected of the PC Please let me know what more can I do or how to test the drivers I will post any news here Thanks for your help in advance

A:BSOD Windows x64, error 0x00000124 hal.dll+12a3b ntoskrnl.exe+748c0

Basically a 0x00000124 is a hardware issue; but it may be caused by anything and everything associated with the computer.

The crash dumps provide very less information in the 0x00000124 dumps. And there is only one crash dump which is unfortunately having symbol error and so I failed to read it properly.

Anyway, a single BSOD may always be treated as a glitch. If the issue continues, let us see the further dumps ... if they provide any little more info there.

http://www.sevenforums.com/bsod-help-support/374407-bsod-windows-x64-error-0x00000124-hal-dll-12a3b-ntoskrnl-exe-748c0.html
Relevancy 92.02%

i am having this problem after i change my video cards i upgraded a 460 SLI to a 680
i have run 3dmark11 to try to replicate the bsod or something and nothing happends
i clean my hardware and change the thermal compound then i played some bf3 and paff the same bsod =(

pd: sorry for my english
i forgot to say that i have the last beta drivers from nvidia because with the WHQL i was having problems in gw2
Attachment 231326

A:BSOD playing bf3, hal.dll hal.dll+12a3b , ntoskrnl.exe ntoskrnl.exe+18

Welcome

For the bug check you're getting go through:
Stop 0x124 - what it means and what to try

Also get a latest version of your BIOS.


Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Yusra\Downloads\Fayer\SF_11-09-2012\091112-23509-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
Machine Name:
Kernel base = 0xfffff800`03667000 PsLoadedModuleList = 0xfffff800`038ab670
Debug session time: Wed Sep 12 06:29:05.072 2012 (UTC + 6:00)
System Uptime: 0 days 7:04:57.025
Loading Kernel Symbols
...............................................................
................................................................
................................
Loading User Symbols
Loading unloaded module list
.....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 124, {0, fffffa80086cf028, ba000000, 400405}

*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : hardware

Followup: MachineOwner
---------

5: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa80086cf028, Address of the WHEA_ERROR_RECORD structure.
Arg3: 00000000ba000000, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000000400405, Low order 32-bits of the MCi_STATUS value.

Debugging Details:
------------------
BUGCHECK_STR: 0x124_GenuineIntel

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

PROCESS_NAME: System

CURRENT_IRQL: f

STACK_TEXT:
fffff880`030acb58 fffff800`03630a3b : 00000000`00000124 00000000`00000000 fffffa80`086cf028 00000000`ba000000 : nt!KeBugCheckEx
fffff880`030acb60 fffff800`037f3b03 : 00000000`00000001 fffffa80`0860b890 00000000`00000000 fffffa80`0860b8e0 : hal!HalBugCheckSystem+0x1e3
fffff880`030acba0 fffff800`03630700 : 00000000`00000728 fffffa80`0860b890 fffff880`030acf30 fffff880`030acf00 : nt!WheaReportHwError+0x263
fffff880`030acc00 fffff800`03630052 : fffffa80`0860b890 fffff880`030acf30 fffffa80`0860b890 00000000`00000000 : hal!HalpMcaReportError+0x4c
fffff880`030acd50 fffff800`0362ff0d : 00000000`00000008 00000000`00000001 fffff880`030acfb0 00000000`00000000 : hal!HalpMceHandler+0x9e
fffff880`030acd90 fffff800`03623e88 : 0000003b`5e9a7a72 fffffa80`0ae15ac8 00000000`00000000 00000000`00000000 : hal!HalpMceHandlerWithRendezvous+0x55
fffff880`030acdc0 fffff800`036e4aac : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : hal!HalHandleMcheck+0x40
fffff880`030acdf0 fffff800`036e4913 : 00000000`00000000 00000... Read more

http://www.sevenforums.com/bsod-help-support/252352-bsod-playing-bf3-hal-dll-hal-dll-12a3b-ntoskrnl-exe-ntoskrnl-exe-18-a.html
Relevancy 89.44%

I have currently re-installed win the only software on the system is the software you wanted to grab the files and bluescreen view chrome BSOD ntoskrnl.exe+18d7d3 HAL.DLL+12a3b I believe that's it I tried many different things to figure out what the problem is as well as the clean install and the laptop still crashes as far as I can tell my drivers are up to date After using the diagnostic tool I actually read through some of the info and think maybe one of the issues might be the fan my laptop is just going on yrs old so I can't see why anything else could really be wrong I'm really at a lost here PLEASE HELP ME I've done the mem check that came back fine although I haven't figured out how to see how hot the computer or components are ggrrr at this point installing or checking anything is a hit or miss because it will crash so fast I've attached the requested info Please and thank you for your time in advance

A:BSOD HAL.DLL+12a3b ntoskrnl.exe+18d7d3

Hi and welcome to SF ladymflowers .

The BSOD's you are experiencing, BCC 0x124, are of the most generic type which offer little information
as what is actually causing them.






Quote:
A "stop 0x124" is fundamentally different to many other types of bluescreens because it stems from a hardware complaint. Stop 0x124 minidumps contain very little practical information, and it is therefore necessary to approach the problem as a case of hardware in an unknown state of distress. - H2SO4


All eleven dump files are pointing to the same core, bank and L1 cache data read error
so it seems as if we are dealing with a faulty CPU but I don't have the full picture as of yet
and thermals and RAM may be the factor in this case.


Code:
Error Type : Cache error
Operation : Data Read

===============================================================================
Section 2 : x86/x64 MCA
-------------------------------------------------------------------------------
Descriptor @ fffffa8003ecd148
Section @ fffffa8003ecd2d0
Offset : 664
Length : 264
Flags : 0x00000000
Severity : Fatal

Error : DCACHEL1_DRD_ERR (Proc 0 Bank 0)
Status : 0xb66ac00000000135
Address : 0x000000004c3b10d0
Misc. : 0x0000000000000000
Test for thermals and stability:
Download HWinfo and post a Screenshot of the 'sensors only' window, one at idle and another while putting load on the PC using Prime95 for the CPU.Before running Prime95 make sure to enable Round-off checking (see 1st post under the tutorial).
Reset the BIOS back to default:CLR CMOS


   Note
Write down the current value of the SATA Mode!
Its either AHCI or IDE.
After resetting the CMOS go back and verify the value for SATA Mode is what it was
when the OS was installed.



Seeing you have two RAM sticks, please remove one and assess the situation.
Then do the same with the latter.

Keep us posted.
Good places to read more:
Stop 0x124 - what it means and what to try
Stop 0x124 Troubleshooting - 'New Method'

http://www.sevenforums.com/bsod-help-support/319087-bsod-hal-dll-12a3b-ntoskrnl-exe-18d7d3.html
Relevancy 89.44%

Hello Ive been building or shall i say slowly putting this computer together for close to years now This past year ive been running Hal.dll+12a3b/ntoskrnl.exe+18c633 Bsod into problem after problem and me and my Bsod Hal.dll+12a3b/ntoskrnl.exe+18c633 buddies are stumped by its recent issues st off about months back i had a nvidia gtx ti which burnt out stopped working entirely and i had a stick of my corsair vengeance go bad as well tested with memtest and all kinds of other diagnosis tools indicated bad stick i rma'd those and sold theem to a friend and recently bought a xfx Hd and gb of corsair dominator computer started off rrunning good no Bsods no crashes until this morning installed Planet side logged in played for minutes and the computer rebooted i checked my temps and i was getting a faulty temp from Bsod Hal.dll+12a3b/ntoskrnl.exe+18c633 hwmonitor so i went into my bios to see my mobo temps everything looked nice a cool discarded changes and exited the bios and it went straight into a minidump Bsod i currently have nirsoft bluescreeen viewer on and of the errors are highlighted pink Hal dll a b and ntoskrnl exe c ive cleaned and repaired my registry repaired my windows updated all drivers clean please if anyone can help with this post i'll be your bestfriend for life asus p z deluxe gen mobo corsair iforce gb ssd gb corsair dominator xfx hd- GPU corsair HX PSU Corsair h- cooler corsair d case intel i k Not overclocking

A:Bsod Hal.dll+12a3b/ntoskrnl.exe+18c633

Look at this link and post your BSOD dmp file Blue Screen of Death (BSOD) Posting Instructions

http://www.sevenforums.com/bsod-help-support/279931-bsod-hal-dll-12a3b-ntoskrnl-exe-18c633.html
Relevancy 88.15%

I get a random bsod, most times when the computer is idle.

bluescreenview shows it getting hal dll 12a3b ntoskrnl exe+18dc33 errors

Things i have tried and still getting blue screens
-Put one RAM stick at a time, in the different slots
-I dl'ed Speccy and my temps are in the 40s
-Cleared CMOS
-Updated my BIOS software to latest
-Updated my SSD to latest hardware

Build
CPU: Intel Pentium G3258 3.2GHz Dual-Core Processor
CPU Cooler: Arctic Cooling Freezer 7 Pro Rev.2 45.0 CFM Fluid Dynamic Bearing CPU Cooler
Motherboard: Gigabyte GA-Z97-HD3 ATX LGA1150 Motherboard
Memory: Corsair Vengeance 8GB (2 x 4GB) DDR3-1600 Memory
Storage: Crucial MX100 128GB 2.5" Solid State Drive
Storage: Western Digital Caviar Blue 1TB 3.5" 7200RPM Internal Hard Drive
Video Card: MSI Radeon R9 290 4GB TWIN FROZR Video Card
Case: Corsair SPEC-03 Red ATX Mid Tower Case
Power Supply: Enermax 600W 80+ Platinum Certified Semi-Modular ATX Power Supply
DRW-24B1ST/BLK/B/AS

A:Random BSOD - hal dll 12a3b ntoskrnl exe+18dc33

Hey there! That's an awesome PC you've got there. Anyways lets get to troubleshooting. Also never use BlueScreenView, it's always inaccurate.
Code:
MODULE_NAME: hardware

IMAGE_NAME: hardware

DEBUG_FLR_IMAGE_TIMESTAMP: 0

FAILURE_BUCKET_ID: X64_0x124_GenuineIntel_PROCESSOR_MAE

BUCKET_ID: X64_0x124_GenuineIntel_PROCESSOR_MAE
Hmm, run IntelBurnTest. If the temps go to far then shut IntelBurnTest down. This might be two things, the CPU is failing or the cooler is bad.

http://www.sevenforums.com/bsod-help-support/376416-random-bsod-hal-dll-12a3b-ntoskrnl-exe-18dc33.html
Relevancy 87.29%

When I use my computer normally (as in, just browsing the internet), my computer will often lock up, then restart. I did not think it was a BSOD at first, but occasionally I would actually get the bluescreen, and crash dump files were created.

A strange thing about this BSOD is that I never get it while playing games. The sole exception is the game Path of Exile, but since no dump file is created after a Path of Exile crash, it is probably a separate problem. This problem only occurs while I am doing something mundane that does not use my processor power/memory, apparently.

Here's my Diagnostic .zip. Hopefully one of you guys can enlighten me on what the problem is.

A:BSOD during regular computer use, hal.dll+12a3b & ntoskrnl.exe+18c453

A "stop 0x124" is fundamentally different to many other types of bluescreens because it stems from a hardware complaint. Stop 0x124 minidumps contain very little practical information, and it is therefore necessary to approach the problem as a case of hardware in an unknown state of distress. You can read more on this error and what to try here... Stop 0x124 - what it means and what to try: Stop 124 - What it means and what to try


Code:
Microsoft (R) Windows Debugger Version 6.2.9200.20512 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\USER\Downloads\SF_Logmore\SF_27-10-2013\102713-30716-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.18229.amd64fre.win7sp1_gdr.130801-1533
Machine Name:
Kernel base = 0xfffff800`03667000 PsLoadedModuleList = 0xfffff800`038aa6d0
Debug session time: Sun Oct 27 22:53:06.071 2013 (UTC + 6:00)
System Uptime: 0 days 0:08:21.804
Loading Kernel Symbols
...............................................................
................................................................
..........................
Loading User Symbols
Loading unloaded module list
......
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 124, {0, fffffa8007e32028, f2000040, 800}

Probably caused by : GenuineIntel

Followup: MachineOwner
---------

3: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa8007e32028, Address of the WHEA_ERROR_RECORD structure.
Arg3: 00000000f2000040, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000000000800, Low order 32-bits of the MCi_STATUS value.

Debugging Details:
------------------
BUGCHECK_STR: 0x124_GenuineIntel

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

PROCESS_NAME: firefox.exe

CURRENT_IRQL: f

STACK_TEXT:
fffff880`02fdda58 fffff800`03630a3b : 00000000`00000124 00000000`00000000 fffffa80`07e32028 00000000`f2000040 : nt!KeBugCheckEx
fffff880`02fdda60 fffff800`037f3453 : 00000000`00000001 fffffa80`07e33d30 00000000`00000000 fffffa80`07e33d80 : hal!HalBugCheckSystem+0x1e3
fffff880`02fddaa0 fffff800`03630700 : 00000000`00000728 fffffa80`07e33d30 fffff880`02fdde30 fffff880`02fdde00 : nt!WheaReportHwError+0x263
fffff880`02fddb00 fffff800`03630052 : fffffa80`07e33d30 fffff880`02fdde30 fffffa80`07e33d30 00000000`00000000 : hal!HalpMcaReportError+0x4c
fffff880`02fddc50 fffff800`0362ff0d : 00000000`00000004 00000000`00000001 fffff880`02fddeb0 00000000`00000000 : hal!HalpMceHandler+0x9e
fffff880`02fddc90 fffff800`03623e88 : 00000000`00000020 fffff880`009b0590 00000000`00000000 00000000`00000000 : hal!HalpMceHandlerWithRendezvous+0x55
fffff880`02fdd... Read more

http://www.sevenforums.com/bsod-help-support/309747-bsod-during-regular-computer-use-hal-dll-12a3b-ntoskrnl-exe-18c453.html
Relevancy 87.29%

ntoskrnl.exe+18c453
Funny thing is that i have router and bsod happens parallel(not always) on both computers
///
please help

A:BSOD while browsing/downloading torrents hal.dll+12a3b bsod/ntoskrnl

Hi,
Unfortunately the installation is counterfeit.
The Key is that of a Dell OEM computer - and the motherboard is a retail one by Asus.



The best course of action is to:Purchase a legitimate Windows 7 licence.
Format the HDD.
Reinstall Windows and activate.

http://www.sevenforums.com/bsod-help-support/304027-bsod-while-browsing-downloading-torrents-hal-dll-12a3b-bsod-ntoskrnl.html
Relevancy 86.43%

Hi all New to the forum and I'm after some help on the random BSOD I keep getting I occurrence. ntoskrnl.exe+18c453 Random and hal.dll+12a3b BSOD Error have recently updated my motherboard bundle with an i k overclocked to ghz Gigabyte Z -HD Every now and again I get a BSOD and it has happened during gaming and when browsing the net Using BlueScreenView gave me two addresses ntoskrnl exe ntoskrnl exe c fffff fffff dff x e x db a Microsoft Windows Operating System NT Kernel amp System win sp gdr - Microsoft Corporation C Windows system ntoskrnl exe hal dll hal dll a b fffff dff fffff e x x ce c I read on the web a few things Random BSOD occurrence. Error hal.dll+12a3b and ntoskrnl.exe+18c453 to try One was the possibility of it to do with Avast Antivirus so I uninstalled and put on MSE and the other was do with my eSata Random BSOD occurrence. Error hal.dll+12a3b and ntoskrnl.exe+18c453 connection This is just a port from the back of the PC with a SATA cable running and connecting to my mobo The eSata drive isn't always on and it still caused a BSOD Attached are the dump files as requested Anything else please let me know Thanks

A:Random BSOD occurrence. Error hal.dll+12a3b and ntoskrnl.exe+18c453

Code:
BugCheck 124, {0, fffffa8007fb0028, bf800000, 124}

Probably caused by : GenuineIntel

Code:
3: kd> !errrec fffffa8007fb0028
===============================================================================
Common Platform Error Record @ fffffa8007fb0028
-------------------------------------------------------------------------------
Record Id : 01cead73daec61e2
Severity : Fatal (1)
Length : 928
Creator : Microsoft
Notify Type : Machine Check Exception
Timestamp : 9/9/2013 16:26:47 (UTC)
Flags : 0x00000000

===============================================================================
Section 0 : Processor Generic
-------------------------------------------------------------------------------
Descriptor @ fffffa8007fb00a8
Section @ fffffa8007fb0180
Offset : 344
Length : 192
Flags : 0x00000001 Primary
Severity : Fatal

Proc. Type : x86/x64
Instr. Set : x64
Error Type : Cache error
Operation : Generic
Flags : 0x00
Level : 0
CPU Version : 0x00000000000306c3
Processor ID : 0x0000000000000006

===============================================================================
Section 1 : x86/x64 Processor Specific
-------------------------------------------------------------------------------
Descriptor @ fffffa8007fb00f0
Section @ fffffa8007fb0240
Offset : 536
Length : 128
Flags : 0x00000000
Severity : Fatal

Local APIC Id : 0x0000000000000006
CPU Id : c3 06 03 00 00 08 10 06 - bf fb da 7f ff fb eb bf
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00

Proc. Info 0 @ fffffa8007fb0240

===============================================================================
Section 2 : x86/x64 MCA
-------------------------------------------------------------------------------
Descriptor @ fffffa8007fb0138
Section @ fffffa8007fb02c0
Offset : 664
Length : 264
Flags : 0x00000000
Severity : Fatal

Error : DCACHEL0_WR_ERR (Proc 3 Bank 1)
Status : 0xbf80000000000124
Address : 0x000000023e5f5200
Misc. : 0x0000000000000086
There seems to be a problem with writing data to the cache, I would suggest running this test:Hardware - Stress Test With Prime95
Enable "Round off checking" before the test (see first post below tutorial).

Run the Small FFT's, Large FFT's and Blend Test for a few hours each, do not let the temperature exceed 80*C.

http://www.sevenforums.com/bsod-help-support/304261-random-bsod-occurrence-error-hal-dll-12a3b-ntoskrnl-exe-18c453.html
Relevancy 85.57%

I bought my computer last year Custom build Everything was working fine until January th this year I experienced my first BSOD on this machine I've tried rolling back graphics drivers which were the only ones BSOD Sparse Win7-64bit (hal.dll+12a3b, 0x00000124 ntoskrnl.exe+75bc0) I had installed recently and it didn't help because days later the same BSOD happened The next BSOD didn't happen for another month And recently this is my th one that I am attaching in the log compilation The other dmp's were Sparse BSOD 0x00000124 (hal.dll+12a3b, ntoskrnl.exe+75bc0) Win7-64bit erased by me Sparse BSOD 0x00000124 (hal.dll+12a3b, ntoskrnl.exe+75bc0) Win7-64bit by accident but they all said the same thing when I opened them in BlueScreenView I will try reseating hardware and more stress tests when I have time but I'm really lost here as its such a sparse occurrence that it makes it really hard for me to test in a reasonable amount of time I'm hoping someone here can see what my inexperienced eyes are missing Here's what I do know - I didn't install any drivers for a while month or so other than the nvidia driver which I rolled back - I am not overclocking and just running stock and default BIOS Though since my rd BSOD I have turned on XMP for my RAM didn't make anything worse I guess - The BSOD happens very randomly Twice while I was playing fairly low resource demanding games Once while I was just on desktop dragging organizing files And most recently Sparse BSOD 0x00000124 (hal.dll+12a3b, ntoskrnl.exe+75bc0) Win7-64bit while browsing Twitch tv on Chrome There seems to be nothing in common which is really frustrating - It doesn't seem to be related to how long my computer has been running The most recent happened minutes after turning my computer on - I have a minor suspicion it could be my sound because it's always given me issues distorting not being detected randomly at startup But it is onboard and I have no idea how to begin testing it I will post updates as I perform further tests will be running memtest thru the night last time only ran for hours Please let me know any good suggestions Thanks a lot

A:Sparse BSOD 0x00000124 (hal.dll+12a3b, ntoskrnl.exe+75bc0) Win7-64bit

I apologize ahead of time for losing the other 3 memory dumps, though they all appeared the same I'm sure there was useful information in there. I deleted them by accident via diskcleanup utility. I will post memory dmps as they happen in this thread, but for now if anyone sees a potential problem or has any advice to test please let me know.

http://www.sevenforums.com/bsod-help-support/328551-sparse-bsod-0x00000124-hal-dll-12a3b-ntoskrnl-exe-75bc0-win7-64bit.html
Relevancy 76.97%

Hello I need help with a constant BSOD problem i'm having I installed windows after having multiple problems with windows had to do os installs in a period of months Switched out a sata cord connected to HDD during that time Now i'm getting constant BSOD from windows Win Changed my previous hdd because it was failing bought a WD black tb hdd and installed windows Had constant problems with file corruptions up until the point where i couldn't get to desktop Re-installed windows times until I bought windows Win st problem i ran into with was installing my first game on steam where it wouldn't install but stay stuck on update required fixed Then I received a Constant BSOD Windows ntoskrnl.exe 0x7a 8.1 BSOD while simply browsing Then while playing a game I ran into a bsod So I shut off my pc and switched out the sata cord that connected with hdd Launched game again and received BSOD in an hour Memtest x reported no problems Crystaldiskinfo says HDD is good WD diagnostic Tool claims my HDD passed BlueScreenView claims a driver named ntoskrnl exe with the parameter listing x a CHKDSK fixes nothing Speccy computer specs included http speccy piriform com results AJcVFNWE IgRjLKcmQmjeAW Attached recent DMP files I arleady searched for an answer from previous Windows 8.1 Constant BSOD ntoskrnl.exe 0x7a thread to no avail I Windows 8.1 Constant BSOD ntoskrnl.exe 0x7a think it's either the ram or HDD but i'm not entirely sure I'm hoping this community can help me or at least point me in the right direction Please and thank you Will post more info if requested

A:Windows 8.1 Constant BSOD ntoskrnl.exe 0x7a

Hi pesos, I have just posted with what seems like a very similar problem (http://www.bleepingcomputer.com/forums/t/579615/ssd-boot-drive-intermittent-fails-and-leads-to-bsod/).
I to suspect the boot drive (even though in my case it's a SSD), but it's a bit confusing that it pass a check with the utility SSD Life.

http://www.bleepingcomputer.com/forums/t/579605/windows-81-constant-bsod-ntoskrnlexe-0x7a/
Relevancy 75.25%

Dear all,

I just created an account since I am tired. Tired of trying everything
by bworsing this forum I instantly recognized that they are ton of ID EXPERTS(!) here! Amazing!
Thank you already for even reading my post! You rock!

When I play game or use my CPU little heavier, I instantly get the BSOD

Here are the details:
See attachments --> Dumpfile

Please help me

All the best,
Greetings Darius

A:hal.dll+12a3b and ntoskrnl.exe+189bff

Please read Blue Screen of Death (BSOD) Posting Instructions

http://www.sevenforums.com/bsod-help-support/397685-hal-dll-12a3b-ntoskrnl-exe-189bff.html
Relevancy 73.1%

Hi All I recently put together a new rig and the specs are as follows Specs CPU - i k Motherboard - ASUS Strix X Latest Bios Graphics - EVGA GTX RAM - Corsair DDR MHz GB CMD GX M B C SSD - Samsung Pro GB PSU - Corsair AX i W Issue & Constant 10 Build Windows Random - BSOD New Restarts Occasional I ve been coming across issues from the get go with Windows At first I was experiencing a lot of Windows 10 Constant Random Restarts & Occasional BSOD - New Build BSOD issues which to me appeared to either be driver or memory related This was even after updating to the latest drivers from Nvidia for graphics latest drivers from ASUS for chipset audio ethernet amp WiFi and Samsung NVMe driver for the Pro Page Fault In Nonpaged Area Pool Corruption In File Area Driver Overran Stack Buffer IRQL Not Less or Equal So I decided to do another clean install and try and tackle it step by step Now I m finding that after a clean install and letting windows install all the latest updates prior to installing any software or driver updates Windows will stutter a bit and then randomly restart It will constantly do this and only this morning I m finding it is going to a blank screen after Windows login Attempted So far I ve tried the following Memtest on each RAM Stick Checked out on passes Clean install Windows multiple times and feels like its getting worse and sluggier each time Latest Driver Install from ASUS amp Nvidia BIOS Settings Default i e turned off XMP Profiles Re-enabled CSM I m out of ideas and no step closer to figuring out if its hardware issue or software Windows related I can rule out RAM from the memtest I m hoping to dump the GTX into my partner s computer tonight to see if its the card issue I ll probably try another clean install of W on an older SSD tonight If that fails I ll go back to W and see if I have the same issue Not sure how to rule out Motherboard CPU and PSU issues though If anyone has any suggestions or leads it d be much appreciated and thanks in advance nbsp

A:Windows 10 Constant Random Restarts & Occasional BSOD - New Build

If you can login or transfer the existing C:\Windows\minidump & memory.dmp. You can install the Debugging Tools on that pc, or I think another pc, and run windbg.exe to find the cause.
You can use this to install just the debugging tools Windows 10 SDK - Windows app development (it installs to Program Files (x86)\Windows Kits\10\Debuggers\x64\windbg.exe)
 

https://hardforum.com/threads/windows-10-constant-random-restarts-occasional-bsod-new-build.1906217/
Relevancy 72.24%

Random BSODs hal dll a b ntoskrnl exe cb Spex Toshiba Satellite L Laptop Windows Ultimate x SP Fresh install no updates whatsoever Intel Core Duo P hour Prime DONE GB Random hal.dll+12a3b, IRQL, 0x124.. BSODs ntoskrnl.exe+18cb03, RAM GB GB different speeds hour MEMTEST DONE Random BSODs hal.dll+12a3b, ntoskrnl.exe+18cb03, IRQL, 0x124.. ATI Radeon Mobility HD series hour Prime DONE WD Caviar GB HDD Fresh format chkdsk R DONE quot HDD Scan quot DONE Tried reseating RAM HDD DVD Other checks SFC no problems dxdiag shows no issues have turned on VERIFIER EXE and selected all non MS and some MS as Random BSODs hal.dll+12a3b, ntoskrnl.exe+18cb03, IRQL, 0x124.. well drivers to monitor Software Google Chrome No AV or Firewall Windows' Firewall disabled Tried with full drivers installed full Windows Updates Same results Now reformatted with fresh install with no updates whatsoever and no drivers isntalled Same results Tried a different source CD for Win installation Same results Problem Description Random BSODs showing x mostly IRQL x E x A hal dll ntoskrnl Occurs randomly and very frequently Half of the time can't even load into desktop Prime when it runs shows no errors but half of the time when trying to RUN the workers it the program crashes WITHOUT giving a BSOD or a Random BSODs hal.dll+12a3b, ntoskrnl.exe+18cb03, IRQL, 0x124.. freeze etc In my weeks of trying to debug this laptop there have been moments when it runs fine and I was able to play some games notably World of Tanks Pirates of the Burning Seas to test and ran beautifully Please help me solve this issue I truly want to learn how to thanks Attached is the zip files from SF Diags

A:Random BSODs hal.dll+12a3b, ntoskrnl.exe+18cb03, IRQL, 0x124..

oh and to be sure, let me remark that i have done zero overclocking.
tried with just one stick of RAM (both).
unplugged all USB.
unplugged power and ran on purely battery.
thanks.

http://www.sevenforums.com/bsod-help-support/252349-random-bsods-hal-dll-12a3b-ntoskrnl-exe-18cb03-irql-0x124.html
Relevancy 68.8%

I constantly get BSOD when I run my computer and when I look at BlueScreenView it's mainly caused by ntoskrnl.exe. I have ran MemTest, Prime95, Western Digital Harddrive diagnostics, and everything and nothing worked. I have even reformatted my pc several times. Please help me out!

Windows 7 Enterprise SP1 64 bit
Intel Pentium Dual CPU E2200 2.2GHZ
DDR2 Ram 2Gigs
GeForce 9800GT
XFX Motherboard (forgot which one because I got it a while ago.)

A:Constant BSOD by ntoskrnl.exe

Your BSOD's are wide and varied, not just ntoskrnl. Look at the label inside the computer case What is the make a model #and wattage of your PSU? It may be underpowered for your setup or failing. Try replacing with a 550watt or better PSU.

http://www.techsupportforum.com/forums/f217/constant-bsod-by-ntoskrnl-exe-686895.html
Relevancy 68.8%

I've been getting tons of BSOD's since October, and eventually, busted up my hard disk in December. I've replaced it and re-installed new windows (windows 7 ultimate x64) retail, yet, I'm still having BSOD's pointing-out ntoskrnl.exe as cause. I've tried reseating my processor, re-aligned my RAM, yet the problem still persists. It would really mean a lot if someone can help me address this recurring dilemma I'm having. My PC is 1.5 years old. It has never been overclocked, no modifications.

P.S. The dumps attached are the ones left after I've accidentally "cleaned" it using CCleaner. Also, the dumps dated 010402, are actually just new dumps, i forgot to re-calibrate my system clock (i took out the motherboard battery to check it, thus, resetting the clock).

A:Constant BSOD - ntoskrnl.exe

MSI Afterburner (along with Riva Tuner and EVGA Precision) are known to cause BSOD's on some Win7 systems. Please uninstall it immediately. The driver dates from 2005.

The memory dumps in MSINFO32 are suggestive of a hardware problem.
This includes:
- hardware problems
- overclocking
- compatibility issues (such as MSI Afterburner)
- low-level driver problems (such as Daemon Tools and AMD OverDrive)
- malware

The memory dumps agree with this
11 memory dumps
7 different BSOD error codes
6 different causes blamed.

One blames you hard drive (010602-17097-01.dmp), so I'd suggest starting with this free hard drive diagnostic: HD Diagnostic

If that doesn't reveal anything, then run the rest of the free hardware diagnostics here: Hardware Diags

Daemon Tools (and Alcohol % software) are known to cause BSOD's on some Win7 systems (mostly due to the sptd.sys driver, although I have seen dtsoftbus01.sys blamed on several occasions).
Please uninstall the program, then use the following free tool to ensure that the troublesome sptd.sys driver is removed from your system (pick the 32 or 64 bit system depending on your system's configuration): DuplexSecure - FAQ

AMD OverDrive (AODDriver2.sys) is either a stand-alone application, or a component of the AMD VISION Engine Control Center. This driver is known to cause BSOD's on some Win7 systems.





Quote:
Please uninstall all AMD/ATI video stuff from Control Panel...Programs...Uninstall a program
Then, download and install a fresh copy of the ATI drivers from Global Provider of Innovative Graphics, Processors and Media Solutions | AMD (in the upper right corner of the page)
- Select the "Custom" installation option and don't let it install AMD OverDrive or the VISION Engine Control Center (if present)
Then use the ATI uninstall manager to uninstall the Catalyst Control Center (CCC). This is a separate issue and isn't required for the AMD OverDrive removal.

If the device (AODDriver or AODDriver4.01) remains a problem in perfmon /report, open Device Manager, select the "View" item.
Then select "Show hidden devices" and scroll down to the Non-Plug and Play Drivers section.
Locate the AODDriver entry, right click on it and select "Uninstall". Reboot for changes to take affect.


Sometimes the driver remains and continues to cause BSOD's. If this is the case for you, post back and we'll give further instructions for safely removing it.

If overclocking, please stop. Remove the overclock and return the system to stock/standard values while we're troubleshooting. Once the system is stable again, feel free to resume the overclocking.

Please make sure that you turn Driver Verifier off.

Further info on BSOD error messages available at: http://www.carrona.org/bsodindx.html

The following info is just FYI, I've already addressed the issues that I saw in the above paragraphs
3RD PARTY DRIVERS PRESENT IN THE DUMP FILES

Code:

AtihdW76.sys Tue Dec 06 04:14:25 2011 (4EDDDCF1)
amdxata.sys Fri Mar 19 12:18:18 2010 (4BA3A3CA)
sptd.sys Sun Feb 27 14:29:52 2011 (4D6AA630)
aswTdi.SYS Tue Mar 06 19:01:56 2012 (4F56A574)
aswSnx.SYS Tue Mar 06 19:04:05 2012 (4F56A5F5)
AtiPcie.sys Mon Aug 24 04:25:26 2009 (4A924E76)
aswrdr2.sys Tue Mar 06 19:02:19 2012 (4F56A58B)
aswSP.SYS Tue Mar 06 19:04:03 2012 (4F56A5F3)
AsIO.sys Mon Aug 03 03:03:16 2009 (4A768BB4)
atikmpag.sys Tue Feb 14 21:13:12 2012 (4F3B14B8)
nusb3xhc.sys Thu Jan 21 22:22:21 2010 (4B5919ED)
ASACPI.sys Wed Jul 15 23:31:29 2009 (4A5E9F11)
Rt64win7.sys Fri Jun 10 02:33:15 2011 (4DF1BAAB)
atikmdag.sys Tue Feb 14 21:51:52 2012 (4F3B1DC8)
mcdbus.sys Tue Feb 24 05:34:07 2009 (49A3CD1F)
amdiox64.sys Thu Feb 18 10:17:53 2010 (4B... Read more

http://www.sevenforums.com/bsod-help-support/223652-constant-bsod-ntoskrnl-exe.html
Relevancy 68.37%

For the past couple of months, I've been getting BSODs every so often. I have just replaced my RAM stick, uninstalled avast and installed Microsoft Security Essentials, my display drivers are up to date (AFAIK), so I have no idea where the problem is coming from. Can someone please help?

A:Constant ntoskrnl.exe BSOD problem

Most recent was related to your ATI video driver. I would re-install newest from here. AMD Support & Drivers

In addition I would update your asacpi.sys (yours 2004) the pre 2009 versions are known to cause BSOD's

Asacpi.sys

The pre 2009 version of this driver is a known BSOD cause.

Please visit this link: Asus tek computer inc. -support- drivers and download p7p55d le

http://support.asus.com/download.aspx?slanguage=en&m=p7p55d%20le&p=1&s=32&os=29&hashedid=e7zic83pvqsr80lm"] ASUSTeK Computer Inc. -Support- Drivers and Download P7P55D LE
ASUS - Motherboards- ASUS P5K-VM ASUSTeK Computer Inc. - Motherboards- ASUS P5K-VM

Scroll down to the utilities category, then scroll down to the "atk0110 driver for windowsxp/vista/windows 7 32&64-bit" (it's about the 12th item down).

Download and install it.

Go to c:\windows\system32\drivers to check and make sure that the asacpi.sys file is date stamped from 2009 or 2010 (not before).

I would remove sptd.sys (daemon tools)

Please remove any CD visualization programs such as Daemon Tools and Alcohol 120%.

They use a driver, found in your dmp, called sptd.sys, that is notorious for causing BSODs.

Use this SPTD uninstaller DuplexSecure
- Downloads DuplexSecure-Forum - Powered by vBulletin

when you're done you can use this Freeware:

MagicISO Virtual CD/DVD-ROM (MagicDisc) in its place

Using MagicISO to create ISO image files

I would also remove Rapport

Related to RapportCerberus32_34302.sys RapportCerberus from Trusteer Ltd. Known to cause BSOD's

http://www.techsupportforum.com/forums/f299/constant-ntoskrnl-exe-bsod-problem-656559.html
Relevancy 68.37%

My problem is that at least twice a day and always overnight I Get a BOSD and the computer restarts.
Can someone please help?

Thanks

A:ntoskrnl.exe+ceae7 Constant BSOD

Welcome to the forum miamistyledjs,


Code:
dtsoftbus01.sys Fri Feb 21 15:49:36 2014 (53072130)
Daemon Tools driver [br] Possible BSOD issues in Win7
Driver Reference Table - dtsoftbus01.sys


Code:
sptd.sys Thu Oct 31 21:26:53 2013 (527276BD)
SCSI Pass Through Direct Host - Daemon Tools (known BSOD issues with Win7)
Driver Reference Table - sptd.sys

Daemon Tools/Alchohol is known to cause Blue Screens. Please remove it: How to remove sptd.sys from system
Registry and SPTD problems
Use Revo Uninstaller to uninstall stubborn software. Opt for Advance Mode while uninstalling which allows you to remove leftover registry:-Download Revo Uninstaller Freeware - Free and Full Download - Uninstall software, remove programs, solve uninstall problems

Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable!:-


Code:
ctxusbm.sys Tue Sep 8 00:09:28 2009 (4AA54C58)
Citrix ICA Client USB Monitor Driver
Driver Reference Table - ctxusbm.sys


Code:
MarvinBus64.sys Sat Sep 24 03:17:03 2005 (433470CF)
likely a part of Pinnacle Studio's Marvin Bus
Driver Reference Table - MarvinBus64.sys


Code:
npf.sys Fri Jun 25 22:50:58 2010 (4C24DE72)
NetGroup Packet Filter Driver, part of the WinPcap packet capture library
Driver Reference Table - npf.sys


Code:
snapman.sys Wed Sep 15 14:19:37 2010 (4C908199)
Acronis True Image Snapshot Manager driver also included in Seagate DiscWizard
Driver Reference Table - snapman.sys

To perform a clean install of a driver, follow this tutorial:How to Clean Left Over Driver Files with Driver Sweeper

Reduce items at start-up:How to Change, Add, or Remove Startup Programs in Windows 7
Perform a clean boot: How to Troubleshoot a Problem by Performing a Clean Startup in Windows 7 or Vista
Scan with Kaspersky TDSSKiller:Anti-rootkit utility TDSSKiller
ESET online scanner: Free Online Virus Scanner | ESET
Run the System File Checker that scans the of all protected Windows 7 system files and replaces incorrect corrupted, changed/modified, or damaged versions with the correct versions if possible:How to Repair Windows 7 System Files with System File Checker
Check for heating issues using Speccy or HWmonitor

Upload a screen shot: Screenshots and Files - Upload and Post in Seven Forums
Run Disk Check on your hard disk for file system errors and bad sectors on it:How to Run Disk Check in Windows 7
Post back with results.

BSOD DUMP OUTPUT

Code:
Built by: 7601.18409.amd64fre.win7sp1_gdr.140303-2144
Debug session time: Fri Jun 6 00:26:00.467 2014 (UTC + 6:00)
System Uptime: 0 days 14:41:25.732
BugCheck 1A, {5100, fffff6fc400716c8, 29, f600}
*** WARNING: Unable to verify timestamp for npf.sys
*** ERROR: Module load completed but symbols could not be loaded for npf.sys
Probably caused by : npf.sys ( npf+381f )
BUGCHECK_STR: 0x1a_5100
PROCESS_NAME: NETGEARGenieDa
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.18409.amd64fre.win7sp1_gdr.140303-2144
Debug session time: Thu Jun 5 03:47:09.016 2014 (UTC + 6:00)
System Uptime: 0 days 4:53:56.280
BugCheck 7F, {8, 80050031, 406f8, fffff80002d153cd}
Probably caused by : ntkrnlmp.exe ( nt!KiDoubleFaultAbort+b2 )
BUGCHECK_STR: 0x7f_8
PROCESS_NAME: g2mcomm.exe
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.18409.amd64fre.win7sp1_gdr.140303-2144
Debug session time: Wed Jun 4 09:41:13.434 2014 (UTC + 6:00)
System Uptime: 1 days 6:58:34.324
BugCheck 3B, {c0000005, fffff88000c01dfe, fffff88009357db0, 0}
Probably caused by : fltmgr.sys ( fltmgr!FltpPerformPreCallbacks+8e )
BUGCHECK_STR: 0x3B
PROCESS_NAME: SmartAudio.exe
???????????????????????????????????... Read more

http://www.sevenforums.com/bsod-help-support/333843-ntoskrnl-exe-ceae7-constant-bsod.html
Relevancy 67.51%

Hi, i keep getting bsod's randomly when i boot up. sometimes they're instant and sometimes they're unexpected during running programs ect. most of my errors come back as IRQL_NOT_LESS_OR_EQUAL but i have had: KMODE_EXCEPTION_NOT_HANDLED & PAGE_FAULT_IN_NONPAGED_AREA. help would be much apperciated.

Pc Specs:
- AMD FX-6100 3.3GHz
- 8GB RAM
- Asus M5a99x Mobo

all new, around a week or two old.

OS:
Windows 7 Home Premium 64bit.

ive included crash dump files but not a 'PERFMON HTML file' :S (could understand how to do it)

A:Constant BSOD's - ntoskrnl.exe+705c0 - IRQL_NOT_LESS_OR_EQUAL

I notice you have Norton Internet Security installed on your computer. For testing purposes, remove it with the Norton Removal Tool and install Microsoft Security Essentials. Run MSE with Windows firewall.

Code:

Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Mike\Downloads\BSODDmpFiles\Mconi3\Windows_NT6_BSOD_jcgriff2\122411-19281-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\users\mike\documents\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (6 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0xfffff800`02816000 PsLoadedModuleList = 0xfffff800`02a53e50
Debug session time: Sat Dec 24 12:24:29.110 2011 (UTC - 7:00)
System Uptime: 0 days 0:10:20.915
Loading Kernel Symbols
...............................................................
................................................................
............................
Loading User Symbols
Loading unloaded module list
........
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 50, {fffff7ffec8a2117, 0, fffff800028a2115, 2}
Could not read faulting driver name
Probably caused by : hardware ( nt! ?? ::FNODOBFM::`string'+40f90 )

Followup: MachineOwner
---------

1: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced. This cannot be protected by try-except,
it must be protected by a Probe. Typically the address is just plain bad or it
is pointing at freed memory.
Arguments:
Arg1: fffff7ffec8a2117, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffff800028a2115, If non-zero, the instruction address which referenced the bad memory
address.
Arg4: 0000000000000002, (reserved)

Debugging Details:
------------------
Could not read faulting driver name

READ_ADDRESS: GetPointerFromAddress: unable to read from fffff80002abe0e0
fffff7ffec8a2117

FAULTING_IP:
nt!MmAccessFault+535
fffff800`028a2115 8425fcffffe9 test byte ptr [fffff7ff`ec8a2117],ah

MM_INTERNAL_CODE: 2

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

BUGCHECK_STR: 0x50

PROCESS_NAME: chrome.exe

CURRENT_IRQL: 0

TRAP_FRAME: fffff88002b626a0 -- (.trap 0xfffff88002b626a0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=fffffa8006bd5000 rbx=0000000000000000 rcx=00000000000000ff
rdx=00000000000000c0 rsi=0000000000000000 rdi=0000000000000000
rip=fffff800028a2115 rsp=fffff88002b62830 rbp=fffff88002b62880
r8=000000000000000c r9=fffff6800002fe00 r10=0000000000000000
r11=fffff88002b62a80 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up di pl nz ac po nc
nt!MmAccessFault+0x535:
fffff800`028a2115 8425fcffffe9 test byte ptr [fffff7ff`ec8a2117],ah ds:0fe0:fffff7ff`ec8a2117=??
Resetting default scope

MISALIGNED_IP:
nt!MmAccessFault+535
fffff800`028a2115 84... Read more

http://www.sevenforums.com/bsod-help-support/204645-constant-bsods-ntoskrnl-exe-705c0-irql_not_less_or_equal.html
Relevancy 67.51%

Hi everyone I've been fighting with this issue for what seems like forever at this point I've been able to get by ignoring it or trying occasional tweaks but after having it crash multiple times during my conquest of northern Constant any ntoskrnl.sys typically activity, with BSOD during Europe in CK as the Empire of Scandinavia well My patience is shot These BSOD's Constant BSOD during any activity, typically with ntoskrnl.sys tend to arise from ntoskrnl exe with the usual BCC being b or e They can happen while I'm Constant BSOD during any activity, typically with ntoskrnl.sys just using the Internet they can happen when I'm playing CK Constant BSOD during any activity, typically with ntoskrnl.sys Really any time my computer decides it's time to shit the bed I've not been able to identify the underlying cause as it happens so randomly Here are the steps I've taken to try and resolve this Downgrade driver from latest to read somewhere that it's more stable for my graphics card Update NIC and wireless adapter drivers had earlier issues with the network sys Run disc checks and Memtest disc check found a few errors Memtest was clean Run Malwarebytes and Spybot in regular and safe mode completely clean Upgraded my CPU cooler to the Coolermaster EVO this was mostly done because the stock was just crappy Reset BIOS values I'm just completely stumped Please let me know if I can provide any further information I would really love to get a definite answer or to have someone more experienced look over the logs to see if they can spot any issues Whoever resolves this for me the next child born to my dynasty will be named after you in-game and I will post a screenshot to prove it

A:Constant BSOD during any activity, typically with ntoskrnl.sys

Had another one last night, uploading the latest Diagnostic Tool report.

http://www.sevenforums.com/bsod-help-support/303163-constant-bsod-during-any-activity-typically-ntoskrnl-sys.html
Relevancy 67.51%

About a month ago I started to get a lot win32k.sys ntoskrnl.exe involving BSOD Constant and of Constant BSOD involving ntoskrnl.exe and win32k.sys blue screens which I thought was due to a new update for my Nvidia video drivers They started getting worse so I downloaded WhoCrashed in order to Constant BSOD involving ntoskrnl.exe and win32k.sys get a better description of what was happening and it came to my attention that most were involving the ntoskrnl exe I had done some google'ing and apparently that is something you cannot just re-download and install as it is a compendium of your computer's drivings and or settings or so I've read I decided to look further into it and it was also said that it could be due to using an old keyboard which my keyboard was indeed years old Ultimately after making sure all my drivers were up-to-date and yet still getting blue screens I re-installed Windows I did this a few days ago Thursday perhaps and I am still getting blue screens like they are going out of style I've used MemTest to check my RAM and after about - passes it came up with errors I cleaned all the dust out re-seated the RAM and tested each stick separately but could not duplicate the MemTest errors again Regardless I kept getting blue screens I use Steam often and if I try to play any games it's a guaranteed blue screen in about minutes of playing Leaving my computer just at the desktop will also result in a blue screen eventually but strangely if I leave Windows Media Player open playing an mp it seems to put off the blue screens indefinitely until I either try to watch anything on youtube com or play a game on Steam I'm at my wits end with this computer It's a custom build and is a little over a year old I built it in August ' I believe I'm nervous that if I take it to my local computer shop for a diagnosis it might turn into something a whole lot more expensive and I would like to exhaust all possible solutions first I've heard great things about these forums Please help and thanks for your time Windows Ultimate -Bit OEM ASUS M A TD EVO Motherboard AMD Phenom II X GHz x KB L Cache MB L Cache Socket AM W Quad-Core Processor HDZ FBGMBOX Gigabyte GeForce GTX G Skill Ripjaws x GB GB Corsair CMPSU- TX W ATX V EPS V Power Supply

A:Constant BSOD involving ntoskrnl.exe and win32k.sys

Quote:
I've used MemTest to check my RAM and after about 6-7 passes, it came up with errors. I cleaned all the dust out, re-seated the RAM, and tested each stick separately but could not duplicate the MemTest errors again.


One of your RAM stick is probably defective or your BIOS RAM settings such as timings/voltages are incorrectly configured.
Reset your BIOS to default values

http://www.sevenforums.com/bsod-help-support/188830-constant-bsod-involving-ntoskrnl-exe-win32k-sys.html
Relevancy 67.51%

Today while running graphics intensive software my computer crashed and ever since I haven't been able to boot successfully to Windows It will either boot to the windows logo then the screen goes black or it gets to the windows ntkrnlmp.exe BSOD. ntoskrnl.exe and and Constant crashing logo then BSODs The first few blue screens I got gave an error about quot SYSTEM SERVICE EXCEPTION quot by quot win k sys quot I did a system restore to a restore point made yesterday and it booted to the desktop successfully only to blue screen again Constant crashing and BSOD. ntoskrnl.exe and ntkrnlmp.exe after a couple minutes of just web browsing Now I keep getting blue screens but with a different error I've included the WhoCrashed crash report below Anyone have a clue what's going on On Wed PM GMT your computer crashed crash dump file C WINDOWS Minidump - - dmp This was probably caused by the following module ntoskrnl exe nt x A Bugcheck code x B xC xFFFFF D E xFFFFD A C x Error SYSTEM SERVICE EXCEPTION file path C WINDOWS system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System Bug check description This indicates that an exception happened while executing a routine that transitions from non-privileged code to privileged code This appears to be a typical software driver bug and is not likely to be caused by a hardware problem The crash took place in the Windows kernel Possibly this problem is caused by another driver that cannot be identified at this time On Wed PM GMT your computer crashed crash dump file C WINDOWS memory dmp This was probably caused by the following module ntkrnlmp exe nt KeBugCheckEx x Bugcheck code x B xC xFFFFF D E xFFFFD A C x Error SYSTEM SERVICE EXCEPTION Bug check description This indicates that an exception happened while executing a routine that transitions from non-privileged code to privileged code This appears to be a typical software driver bug and is not likely to be caused by a hardware problem The crash took place in the Windows kernel Possibly this problem is caused by another driver that cannot be identified at this time On Wed PM GMT your computer crashed crash dump file C WINDOWS Minidump - - dmp This was probably caused by the following module ntoskrnl exe nt x A Bugcheck code x x FFFB A ECF x x FFFB A ECF x Error PAGE FAULT IN NONPAGED AREA file path C WINDOWS system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System Bug check description This indicates that invalid system memory has been referenced This appears to be a typical software driver bug and is not likely to be caused by a hardware problem The crash took place in the Windows kernel Possibly this problem is caused by another driver that cannot be identified at this time My hardware is i k cpu amd r x gpu asus p z -v pro mobo G SKILL Sniper GB x GB DDR memory Intel Series Maple Crest GB D for the OS Seagate Barracuda TB hard drive What I've tried system restore running chkdsk f reseating RAM swapping out RAM with another set only using a single RAM stick tried in two different slots running Driver Verifier running MalwareBytes

A:Constant crashing and BSOD. ntoskrnl.exe and ntkrnlmp.exe

Please follow these instructions: Blue Screen of Death (BSOD) Posting Instructions
Run SFC: SFC /SCANNOW Command - System File Checker - Windows 7 Help Forums

http://www.eightforums.com/bsod-crashes-debugging/62923-constant-crashing-bsod-ntoskrnl-exe-ntkrnlmp-exe.html
Relevancy 67.51%

Pretty much had these only the past week or so everything was running fine untill i came home to a blue screen ever since then things have been crashing and things have been shutting down unexpectedly Usually skype would make the shutdown noise and then i'd recieve a bluescreen Constant Crashing ntoskrnl.exe Freezez/BSOD I used the program whocrashed to gather the infomation from the dump files left Before it was just blue screening and was unable to write a memory file but i managed Constant Freezez/BSOD ntoskrnl.exe Crashing to fix that problem Here are the whocrashed Logs On Wed GMT your computer crashed crash dump file C Windows Minidump - - dmp This was probably caused by the following module ntoskrnl exe nt x CD Bugcheck code xF x xFFFFFA FD F xFFFFFA FD D xFFFFF D F Error CRITICAL OBJECT TERMINATION file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System Bug check description This indicates that a process or thread crucial to system operation has unexpectedly exited or been terminated This appears to be a typical software driver bug and is not likely to be caused by a hardware problem The crash took place in the Windows kernel Possibly this problem is caused by another driver which cannot be identified at this time I've also tried using windows startup repair only to recieve a boot failure with the error code xc f quot the boot selection failed because a required device is inaccessible quot

A:Constant Freezez/BSOD ntoskrnl.exe Crashing

1.Please download the free version of Malwarebytes.
Update it immediately.
Do a full system scan
Let us know the results at the end.

Malwarebytes : Download free malware, virus and spyware tools to get your computer back in shape!

2.Run a Check Disk...

Disk Check

3.
* We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

* If you are overclocking STOP

* We could also use some system information, which you can get easily by running msinfo32. To do that go to start>run>type msinfo32>enter

When it is finished running go to file>save>name it and upload to us here.

* You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.


To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

http://www.sevenforums.com/bsod-help-support/222761-constant-freezez-bsod-ntoskrnl-exe-crashing.html
Relevancy 67.51%

Hello! I've been recieving reoccurring BSODs from 3d gaming. BlueScreenView reports that I've been getting ntoskrnl+7cc40. The bug check string is usually DRIVER_IRQL_NOT_LESS_OR_EQUAL, IQRL_NOT_LESS_OR_EQUAL, PAGE_FAULT_IN_NON_PAGED_AREA, and KMODE_EXCEPTION_NOT_HANDLED. I have tried updating all of my drivers, sfc /scannow, and chkdsk. None seems to work. I'm running a HP Pavilion dv4-2145dx, that's about 2-3 years old.

Specs:
- Windows 7 Home Premium 64bit (OEM)
- AMD Turion(tm) II Dual-Core Mobile M520
- ATI Mobility Radeon 4200 Series
- 4gb ram

attached is my bsod dmp and system file collection
Please help! thanks in advance!

A:Constant BSOD from 3d gaming, ntoskrnl+7cc40

Possible out of date drivers:
Code:
iirsp fffff880`01558000 fffff880`01569000 Tue Dec 13 14:47:54 2005 (439f418a) 00019fb9 iirsp.sys
nfrd960 fffff880`016cf000 fffff880`016df000 Tue Jun 06 15:11:48 2006 (4485ef94) 0000ffcb nfrd960.sys
adpu320 fffff880`01200000 fffff880`0122f000 Tue Feb 27 17:04:15 2007 (45e4c6ff) 0003588d adpu320.sys
adpahci fffff880`01397000 fffff880`013ed000 Tue May 01 11:30:09 2007 (46377921) 00058e0f adpahci.sys
arc fffff880`0149d000 fffff880`014b6000 Thu May 24 15:27:55 2007 (4656035b) 00017fb4 arc.sys
SiSRaid2 fffff880`019dd000 fffff880`019eb000 Wed Sep 24 12:28:20 2008 (48da86c4) 00011d5d SiSRaid2.sys
sisraid4 fffff880`01800000 fffff880`01818000 Wed Oct 01 15:56:04 2008 (48e3f1f4) 0001ec6b sisraid4.sys
adp94xx fffff880`0131c000 fffff880`01397000 Fri Dec 05 16:54:42 2008 (4939bf42) 0007c740 adp94xx.sys
lsi_fc fffff880`01569000 fffff880`01588000 Tue Dec 09 15:46:09 2008 (493ef531) 0001dc09 lsi_fc.sys
arcsas fffff880`014b6000 fffff880`014d1000 Wed Jan 14 12:27:37 2009 (496e3ca9) 0001f176 arcsas.sys
ql2300 fffff880`01839000 fffff880`019dd000 Thu Jan 22 16:05:06 2009 (4978fba2) 0017acdb ql2300.sys
vsmraid fffff880`01769000 fffff880`01793000 Fri Jan 30 18:18:57 2009 (4983a701) 00028def vsmraid.sys
elxstor fffff880`014d1000 fffff880`01558000 Tue Feb 03 15:52:11 2009 (4988ca9b) 0008214f elxstor.sys
stexstor fffff880`01818000 fffff880`01822000 Tue Feb 17 16:03:36 2009 (499b4248) 0000b026 stexstor.sys
hamachi fffff880`047f5000 fffff880`04800000 Thu Feb 19 03:36:41 2009 (499d3639) 0000a5d7 hamachi.sys
amdsbs fffff880`0144b000 fffff880`01492000 Fri Mar 20 12:36:03 2009 (49c3e213) 0003938a amdsbs.sys
lsi_scsi fffff880`0159b000 fffff880`015ba000 Thu Apr 16 16:13:50 2009 (49e7ad9e) 0002a7b5 lsi_scsi.sys
HpqKbFiltr fffff880`04a7f000 fffff880`04a8b000 Wed Apr 29 07:48:30 2009 (49f85aae) 00006ec8 HpqKbFiltr.sys
AtiPcie fffff880`02050000 fffff880`02058000 Tue May 05 09:00:22 2009 (4a005486) 000134c7 AtiPcie.sys
Apfiltr fffff880`04400000 fffff880`0443f000 Tue May 12 03:38:59 2009 (4a0943b3) 0003ca71 Apfiltr.sys
GEARAspiWDM fffff880`04a46000 fffff880`04a53000 Mon May 18 06:17:04 2009 (4a1151c0) 000159b4 GEARAspiWDM.sys
lsi_sas fffff880`01033000 fffff880`01050000 Mon May 18 18:20:23 2009 (4a11fb47) 000230a6 lsi_sas.sys
lsi_sas2 fffff880`01588000 fffff880`0159b000 Mon May 18 18:31:48 2009 (4a11fdf4) 0002002e lsi_sas2.sys
megasas fffff880`015ba000 fffff880`015c6000 Mon May 18 19:09:46 2009 (4a1206da) 000169a1 megasas.sys
ql40xx fffff880`0170a000 fffff880`01769000 Mon May 18 19:18:11 2009 (4a1208d3) 00029201 ql40xx.sys
MegaSR fffff880`0162b000 fffff880`016cf000 Mon May 18 19:25:54 2009 (4a120aa2) 00052e51 MegaSR.sys
Rt64win7 fffff880`04a0d000 fffff880`04a46000 Fri May 22 08:52:30 2009 (4a16bc2e) 00041606 Rt64win7.sys
enecir fffff880`045d9000 fffff880`045f6000 Sun Jun 28 20:17:30 2009 (4a48243a) 00019675 enecir.sys
iirsp.sys
nfrd960.sys
adpu320.sys
adpahci.sys
arc.sys
SiSRaid2.sys
sisraid4.sys
adp94xx.sys
lsi_fc.sys
arcsas.sys
ql2300.sys
vsmraid.sys
elxstor.sys
stexstor.sys
hamachi.sys
amdsbs.sys
lsi_scsi.sys
HpqKbFiltr.sys
AtiPcie.sys
Apfiltr.sys
GEARAspiWDM.sys
lsi_sas.sys
lsi_sas2.sys
megasas.sys
ql40xx.sys
MegaSR.sys
Rt64win7.sys
enecir.sys



Code:

Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [D:\Kingston\BSODDmpFiles\Vimicry\Windows7_Vista_jcgriff2\030712-31340-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Machine Name:
Kernel base = 0xfffff800`03257000 PsLoadedModuleList = 0xfffff800`0349c670
Debug session t... Read more

http://www.sevenforums.com/bsod-help-support/218102-constant-bsod-3d-gaming-ntoskrnl-7cc40.html
Relevancy 67.51%

Hi Guys, working on a friends computer who has recently been having trouble with his computer. As of late, his computer has been crashing to BSOD and restarting out of the blue(no bsod). If you guys would be so kind to help me out, I would appreciate it.
 
I suspect that it might be a display driver because most of the BSOD occurred during gameplay. We have already attempted to reinstall the graphic drivers to no avail. 
 
· OS - Windows 10· x64· Windows 7· Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)? Full· Age of system (hardware) ~2 years· Age of OS installation - OS was reinstalled last year due to failing SSD· CPU - AMD FX-6300· Video Card - GTX 750· MotherBoard - 970A-D3P
 
 
Speccy:http://speccy.piriform.com/results/KnfCzt2q8q8ZCKJsozq86W8

http://www.bleepingcomputer.com/forums/t/612616/constant-bsod-ntoskrnlexe-restarts-with-no-warnings/
Relevancy 67.51%

Hello all. I recently decided to fork over the money and put myself together a nice gaming computer. The problem is I'm being constantly plagued by BSOD even as I currently type this out.

I've never been very computer savvy so I had to have my tech friend walk me through getting all the right stuff purchased and put together.

I'm running Windows 7 Ultimate x64
2 2GB of RAM
ASUS HD7750 graphcis card
ASUS M5A78L-M LX Motherboard
AMD Athlon II X3 450 Rana 3.2GHz Processor
500GB SATA Hard drive

My friend downloaded some debug software that loaded the minidumps and showed that most of the BSODs were caused by ntoskrnl.exe

Also, I'm not sure, but I think I keep hearing a soft squeaking noise coming from the computer.

A:Constant BSOD caused possibly by ntoskrnl.exe

What you need to do is put in your installation disk and go into to the recovery console once in your recovery console type in chkdsk /r and hit enter that should fix it if not let me know

http://www.sevenforums.com/bsod-help-support/237094-constant-bsod-caused-possibly-ntoskrnl-exe.html
Relevancy 67.51%

Over the past months I have been plagued by continues blue screening and crashes. The crashes can happen randomly doing any task such as browsing or playing games from steam. I have reinstalled windows 8 and upgraded to windows 8.1. The reinstall did not do anything to stop the crashes. I have also updated any drivers including GPU drivers.
Here's my system:
Windows 8.1 x64AMD Phenom II X6 1055T processor8 GB of installed memoryAMD Radeon HD 5700 Series

I use blue screen viewer and also have included my BSOD .zip

http://www.eightforums.com/bsod-crashes-debugging/72990-bsod-not-constant-drivers-ntfs-sys-ntoskrnl-exe.html
Relevancy 67.08%

Hi Guys

I'm having some difficulty with a new build that I did for a relative. It intermittantly does the old BSOD.

It's a Windows 7 Home Premium 64bit (OEM) PC
The system was bought new last week and the OS has been installed for the same amount of time.
AsRock 870 Extreme 3 MoBo
AMD Phenom X4 955
4GB Kingston DDR3 RAM
AMD Radeon 6850 HD

I tried to make sure that all drivers have been updated and also run the windows memory diagnostic (only 2 passes ima going to run more while I wait for a reply)

Any assistance on this one will be greatly appreciated. Thanks in advance.

A:BSOD ntoskrnl.sys - New PC build

  
Quote: Originally Posted by Dolsande


Hi Guys

I'm having some difficulty with a new build that I did for a relative. It intermittantly does the old BSOD.

It's a Windows 7 Home Premium 64bit (OEM) PC
The system was bought new last week and the OS has been installed for the same amount of time.
AsRock 870 Extreme 3 MoBo
AMD Phenom X4 955
4GB Kingston DDR3 RAM
AMD Radeon 6850 HD

I tried to make sure that all drivers have been updated and also run the windows memory diagnostic (only 2 passes ima going to run more while I wait for a reply)

Any assistance on this one will be greatly appreciated. Thanks in advance.


Hi Dolsande welcome to SF
Please follow these steps and upload ur minidumps Blue Screen of Death (BSOD) Posting Instructions

http://www.sevenforums.com/bsod-help-support/174481-bsod-ntoskrnl-sys-new-pc-build.html
Relevancy 67.08%

Greetings! Recently I built my new pc. Have been having some BSOD issues (ntoskrnl.exe). I thought i had it resolved but i tried to play a new game(BlackDesert) and it popped up again. The minidump is attached. So far i have tried old nvidia drivers(359.06) after removing the newest ones with DDU and updating all of the other drivers. I ran the ASUS stress test on the cpu, gpu and memory for two hours and had no errors. All of the hardware is new except for the video card. Have tried reinstalling direct x. This is also the 2nd clean install of windows 10 i have used

At this point i am out of ideas, hopefully someone here will have suggestions.

windows 10 education version
asus z170a motherboard
asus gtx670 gpu [
Trident Z] F4-3200C16Q-16GTZB
corsair rm850i psu
Intel Skylake i5-6600k
Samsung 950 m.2
Samsung 850 EVO x2

http://www.tenforums.com/bsod-crashes-debugging/44610-new-pc-build-bsod-ntoskrnl-exe.html
Relevancy 66.65%

Ever since I bought this new computer months ago it's already been giving me problems with BSOD's and the tech company that constant these of Really random BSOD's tired ntoskrnl.exe+75bc0 sold it to me is literally useless to help me with this problem First of all I bought it with sticks of GB RAM totaling GB RAM but apparently the RAM sticks were corrupt or Really tired of these constant random BSOD's ntoskrnl.exe+75bc0 something tried exchanging them various times and the corrupt RAM gave me BSOD's when there were sticks in but it works fine with only stick of GB RAM The sticks are apparently conflicting with eachother and the tech company decided to give me stick of GB which I'll be recieving trading in Really tired of these constant random BSOD's ntoskrnl.exe+75bc0 for the GB's next week Moving on Really tired of these constant random BSOD's ntoskrnl.exe+75bc0 sometimes even with RAM stick I still get BSOD issues I have bluescreenview and eventually it all leads up to something called quot ntoskrnl exe bc quot I feel like they built my computer wrong or something But I also feel like it's an NVIDIA Graphics card issue Thing is I don't know what to do about it as I'm not knowledgeable with computers Back when I tried using this computer with sticks of GB RAM it worked except when I tried to run games like League of Legends it simply would just outright BSOD when I ran a game I also BSOD'd times while typing this thread after receiving today my computer back from the tech company who are basically like quot idk quot towards the whole situation If anyone knows what the problem is and what I could do to fix this help would be very much appreciated and I would be very graetful thank you

A:Really tired of these constant random BSOD's ntoskrnl.exe+75bc0

Hi Princey.

Yes, I agree that it is bad that the BSODs are occurring even with 1 RAM stick. But, multiple things are failing here, display and network.

Update the intel network driver from https://downloadcenter.intel.com/default.aspx.

Install the NVIDIA DRIVERS 314.22WHQL only.
Uninstall All nvidia items in Control Panel > Programs and features3D Vision Control Driver
3D Vision Driver
Graphics Driver
HD Audio Driver
PhysX
nvidia Update
(Are you using nvidia chipset drivers? If so, dont uninstall anything other than those are listed).
Now follow Drivers - Clean Left over Files after Uninstalling
Download 314.22 WHQL. While installing, Select Custom (Advanced) install. In the next page, follow this settings:
Also, test the RAM module for possible errors, too.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.
If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Let us know the results.

http://www.sevenforums.com/bsod-help-support/323368-really-tired-these-constant-random-bsods-ntoskrnl-exe-75bc0.html
Relevancy 66.22%

Hi all.
Recently I put together a new PC and since installing windows on it, I have been having issues with the stability. I keep getting BSOD's very often and I can't pinpoint the problem. I performed memory checks on the RAM. I checked every module in every slot and I didn't come up with errors. I have 2 SSD's, one samsung series 830 256GB and one kingston V+200 60GB and windows crashes on both drives. My BIOS is updated and I think it's set up propperly.
I've been trying to find a reason for the BSOD's and crashes for the past few days but I can't seem to pinpoint a reason.
Any sort of feedback is appreciated, Thanks

Recent most BSOD's:
-DIVER_IRQL_NOT_LESS_OR_EQUAL 0x000000d1
-UNEXPECTED_KERNEL_MODE_TRAP 0x0000007f
-SYSTEM_SERVICE_EXCEPTION 0x0000003b
 

A:New build, constant BSOD

What's the motherboard make and model? Is Windows 7 fully updated applying even the optional updates? Are you over-clocking? Are there any yellow exclamation points in the device manager?
 

http://www.techspot.com/community/topics/new-build-constant-bsod.182935/
Relevancy 66.22%

Hi OK so I decided that I would build my own PC I'm of limited technical knowledge I guess I could be called a 'newbie' a very enthusiastic one who learns very quick I did a LOT of research before I started amp made Constant BSOD new PC Build since sure all components were compatible everything was okay for a Constant BSOD since new PC Build day or so installed my gpu amp then lots Constant BSOD since new PC Build of problem appeared It seems for every problem I solve I create more I think I need to stipulate that I upgraded my previous PC amp installed a new motherboard with new DDR RAM in place of DDR I had previously After I had done that I had a problem of Firefox constantly crashing amp many many BSOD's As a very heavy PC user I decided that the time had come to buy invest in a new PC and this is where I decided to build a new PC myself to save money amp for pleasure With the new build I made sure I got only components with very high reviews amp good track records I made sure each part was compatible amp proceeded to build I decided I would keep the GB MHz DDR RAM from my old PC amp use it in the new build So with there being the same issues with the old PC as there have been in this build not all but a lot - Firefox crashing amp BSOD problems etc I concluded that there must be a bad stick of RAM I ran Windows Memory Diagnostics Tool amp sure enough there were errors although Constant BSOD since new PC Build it didn't give any clue to what they were I ran the test again once for each stick of RAM amp managed to remove the offending stick which I plan to RMA Now I am still getting BSOD but less frequently Windows Explorer has crashed a few times also Anyway I hope that wasn't too much information and that it least helped somewhat I am really stumped amp decided to ask here I have had great use from this website As I explained earlier on I'm not an avid techie yet so please be gentle with me OK so specs are below and I have included the appropriate ZIP files Please let me know if there is anything I have missed amp I am so grateful in advance for all help Windows Home Professional x Full Retail Upgrade version All Hardware is new with warranties RAM is months old and removed from last PC OS was installed week ago trying to avoid a fresh reinstall unless absolutely necessary

A:Constant BSOD since new PC Build

Symantec is a frequent cause of BSOD's. I would remove and replace it with Microsoft Security Essentials AT LEAST TO TEST
http://us.norton.com/support/kb/web_...080710133834EN

Microsoft Security Essentials - Free Antivirus for Windows

http://www.sevenforums.com/bsod-help-support/214592-constant-bsod-since-new-pc-build.html
Relevancy 66.22%

Hi, I built a new pc but since putting it together and installing windows7 i have been getting BSOD's with varying bug check string values, but is nearly always caused by the driver "ntoskrnl.exe". not sure what to do and it's really starting to annoy me as I thought it could be the wireless driver so I updated it and had no bsod for a week or so but they have started occurring again, any help provided would be much appreciated. Attached are my dump files and other stuff the program deemed important.

A:Random BSOD's ntoskrnl.exe new PC build

Multiple bugcheck codes in a small time interval. It indicates to a memory malfunction. Not necessarily the physical memory, a misbehaving driver may also do it.

Test your RAM modules for possible errors. How to Test and Diagnose RAM Issues with Memtest86+
Run memtest86+ for at least 8 consecutive passes.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

If it does not show any error, enable Driver Verifier to monitor the drivers. Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.



   Information
Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.



   Warning
Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.



   Tip

If you fail to get on the Desktop because of DV, Boot into Advanced Boot Options > Safe mode. Disable DV there. Now boot normally again, and try following the instruction of enabling DV again.
If you cannot boot in Safe mode too, do a System Restore to a point you made earlier.

Let us know the results, with the subsequent crash dumps, if any.
______________________________________

Code:
BugCheck 18, {0, fffffa8007e9a7b0, 2, fffffa8006b1c780}

Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+48de1 )

Followup: MachineOwner
---------

Code:
BugCheck 50, {ffffd6fb7ea00118, 0, fffff800035c1382, 7}
Could not read faulting driver name
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+43781 )

Followup: MachineOwner
---------

Code:
BugCheck A, {20, 2, 1, fffff800034cd77c}

Probably caused by : ntkrnlmp.exe ( nt!KeWaitForMultipleObjects+605 )

Followup: MachineOwner
---------

http://www.sevenforums.com/bsod-help-support/359060-random-bsods-ntoskrnl-exe-new-pc-build.html
Relevancy 65.79%

Hi guys,

This is my first time posting on a forum like this so go easy!

I'm having issues with my Windows 7 Ultimate 64 bit PC. Every so often it will just BSOD on me. I've had a look at the errors and it mentions MEMORY_MANAGEMENT and ntoskrnl.exe, but i don't really know what i'm doing so i figured i'd get some REAL help. I've recently installed new graphic drivers, hoping that might help but it just crashed on me again.

Windows was pre installed on the machine and the machine itself is only a year old.

I'll attach the zip file with everything as mentioned in the BSOD post and we'll see how we go.

Thanks in advance!

A:Constant random BSOD, related to ntoskrnl and MEMORY MANAGEMENT

Related to MOBK.sys Change Monitor Filter Driver from Mozy, Inc. Yours from 2009. I would update to current or remove.

http://www.sevenforums.com/bsod-help-support/230127-constant-random-bsod-related-ntoskrnl-memory-management.html
Relevancy 65.36%

Windows 7 64 Bit Professional
Asus m4a78t-e
Phenom ii x4 955
Western Digital 500GB HD
8 Gig Kingston DDR3 RAM
MSI ATI Radeon 4870

I'm having the same BSOD errors even after doing the following:

1. I Replaced the Hard drive, and did fresh reinstall of Windows on it.
2. I Replaced the RAM
3. I Replaced VideoCard to Radeon 6870..Still had issues so went back to old one and still having these issues.

Attached is the BSOD memdump files via Dump and Sys file collection app

I am left to think my motherboard or CPU is at fault since I've used the process of elimination on the rest of the hardware..Any advice would be greatly appreciated

A:BSOD 0x0000003B ntoskrnl.exe on NEW BUILD..please advise :)

You are using the old version of the asus tune up utility.
You can either try replacing the utility. OR since I actually have an asus board myself I can just give you an updated version of the driver file for you to drop into c:\windows\system32
Which should at least be enough to stop the crashing.
Personally I suggest removing the util and pasting in the newer driver version afterwards just to be safe.

Needless to say the version you have there doesn't even work right with xp, let alone win 7.

http://www.sevenforums.com/bsod-help-support/220017-bsod-0x0000003b-ntoskrnl-exe-new-build-please-advise.html
Relevancy 65.36%

Hello,

I recently decided to build my first PC and after I booted up and installed drivers in bulk using the installation disks included, I would recieve random crashes every now and then. The blue screens usually happen about within 1-15 mins of me booting up the computer. If it passes that point I'm usually in the clear to use it as long as I want. Please help.

Thanks

A:Random BSOD on new computer build ntoskrnl.exe

As the starting point, please follow this post to disable Samsung Rapid mode.

Then report us for any further BSOD.
____________________________________________________

Code:
BugCheck F4, {3, fffffa800a9ca060, fffffa800a9ca340, fffff800033d3130}

----- ETW minidump data unavailable-----
Probably caused by : csrss.exe

Followup: MachineOwner
---------

http://www.sevenforums.com/bsod-help-support/374487-random-bsod-new-computer-build-ntoskrnl-exe.html
Relevancy 64.93%

Hi I'm getting the BSOD error on my new custom built machine after a few hours of use every time i use it I've just built the PC a week ago the CPU mobo amp Ram are new parts upgrading from my old set up The HDD amp power supply are years old I've used the SF Diagnostics tool to get the dump files amp attached them to this post My PC specs are Windows bit Home Premium Installed from a purchased OEM dvd on new error BSOD Constant custom build Mobo Asus H M-E Socket w integrated graphics processor amp on board Realtek ALC HD audio card Drivers installed from Constant BSOD error on new custom build bundled dvd CPU Intel Core i k ghz Quad processor Ram X Corsair GB DDR MHz Vengeance Kit - CL - - - Power Supply OCZ Stealth X Stream w HDD Western Digital tb mb cache SATA DVD Drive Pioneer DVD-RW DVR- L ATAPI Case Cooler Master Cm III Advance ATX Mid-Tower Cooling X case fans amp standard Intel CPU cooling fan bundled with chip Hope someone can help me with this it's driving me crazy

A:Constant BSOD error on new custom build

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 124, {0, fffffa800996d028, bf800000, 124}

Probably caused by : GenuineIntel

Followup: MachineOwner
---------
Are you overclocking? As you are getting BSODs, you should stop overclocking and run all the hardware components like CPU, GPU and RAM to their default settings.

Check if the Power Supply Unit (PSU) supplying adequate power to the computer or not.
eXtreme Power Supply Calculator

Report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy. Alternatively, you can publish a Speccy snapshot too: Speccy - Publish Snapshot of your System Specs .

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.
If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

Stress test the CPU.
Hardware - Stress Test With Prime95

Let us know the results.

http://www.sevenforums.com/bsod-help-support/322649-constant-bsod-error-new-custom-build.html
Relevancy 64.93%

W bit SP AMD Athlon X GHz ARCTIC COOLING Freezer Pro Rev GIGABYTE GA- A-UD Corsair G XMS TW X G C A G XFX Radeon HD Corsair TX W CREATIVE SB X-Fi Titanium GB WD Caviar Black Machine was built by local vendor in August It's been back twice they replaced Saphire with XFX first time Replaced Asus M A BSOD, dxgmms1.sys ntoskrnl.exe, build, Custom Random TD-EVO with Gigabyte GA- A-UD next time Symptoms random BSOD multiple programs stop working Custom build, Random BSOD, ntoskrnl.exe, dxgmms1.sys Crashes happen when idle or stressing doesn't matter Can go days without issue I have exact identical software loaded on my W bit machine runs flawlessly Solutions tried Replaced Saphire with XFX Replaced Asus M TD EVO w Gigabyte GA- A-UD Re-formated clean install times Clean install of ATI drivers current Microsoft hotfixes pertaining to this crash wouldn't install don't apply to this system Installed latest direct x runtime All MS updates fully patched System file check sfc scannow Memtest passes Repair install blue screened right after System crashed with no software installed after a reformat This has stumped me the vendor and multiple forums Thanks and good luck

A:Custom build, Random BSOD, ntoskrnl.exe, dxgmms1.sys

The only thing in common with the two dump files provided is a memory access problem. Run RAM - Test with Memtest86+

Also, you can run Driver Verifier - Enable and Disable I recommend backing up important files and creating a system restore point or system image before using Driver verifier. If you are unable to boot Windows normally after enabling, start in safe mode. If safe mode also fails (this is rare, but does happen), run system restore/recovery from system image.

http://www.sevenforums.com/bsod-help-support/199501-custom-build-random-bsod-ntoskrnl-exe-dxgmms1-sys.html
Relevancy 64.93%

I recently rebuilt my computer with almost all new parts except the 2 160GB HDD's which have all of my old data. I am getting multiple BSOD's but they usually refer to the driver ntfs.sys as the culprit from what I can find.

My previous system was receiving ntoskrnl.exe BSOD's but they were fairly rare. My new machine is getting them sporadically but usually a couple a day. It BSOD's once I ran the SF_Diagnostic Tool.

I have attached the dump files it created.

My PC Specs are in my "System Specs" portion of my profile

3.5Ghz FX-6300
8GB GSKILL Ripjaw X
1x Samsung M 120Gb SSD
1x WD Blue 1TB
GigaByte GA-970A-UD3

A:Multiple BSOD New custom Build ntfs.sys ntoskrnl.exe

Hello , The file you uploaded is corrupt, try running the SFDT again using the Grab All option.

Seeing how old the drives are I would recommend testing them.



   Warning
This method should NOT be performed on an SSD!

Testing the HDD:
Perform a Disk Check | Disk Check
Then Post the results following | THIS METHOD
Download SeaTools for Windows if you don't want to use a CD to test the HDD you can use YUMI – Multiboot USB Creator to create a bootable USB (instructions are found at the bottom of both pages).
If SeaTools for Windows is unable to recognize your HDD visit HDDdiag and follow the instructions.

http://www.sevenforums.com/bsod-help-support/303671-multiple-bsod-new-custom-build-ntfs-sys-ntoskrnl-exe.html
Relevancy 64.07%

Hi All After my last rig decided to stop working I decided to build a new one and start fresh Would randomly turn off not BSOD and take multiple - Build Codes a Multiple Fresh - - 3b, 50, Constant BSOD tries to turn back on My new rig is based off a PCGamer build so I know components should work well together OS Windows Ultimate x CPU Intel Core i - K Ghz Motherboard Gigabyte GA-Z AP-D Intel Z Memory x Corsair GB Dual Channel Corsair DDR for Intel Core i Graphics Card s GeForce GT waiting on Sapphire Video Card Radeon HD Sound Card Creative Sound Blaster X-Fi XtremeGamer Fatal ty Pro Monitor s Displays Gateway quot Monitor and output to TVHard Drives Western Digital WD FAEX TB Caviar Black - RPM MB SATA Gbs PSU Ultra X Watt Modular PSUCase COOLER MASTER COSMOS RC- -KSN Fresh Build - Constant BSOD - Multiple Codes - 3b, 50, a -GP Cooling - MM Case Farns plus stock Intel CPU Cooler This issue seems to be isolated to Fresh Build - Constant BSOD - Multiple Codes - 3b, 50, a the Win itself I kept my previous Hard Drives and was able to boot Fresh Build - Constant BSOD - Multiple Codes - 3b, 50, a up XP and it was stable Loaded up my Win - install and nothing my BSOD dumps Hardware was no different So I decided to buy a new hard drive and start completely from scratch with a fresh drive fresh Win Install and everything The only parts above that are quot old quot are the Original Case Monitor Graphics Card as the one I ordered hasn't shown up yet and the SoundBlaster Audio Card The rest of the items are new fresh out of the box I have run the Win Memory Diagnostic Test and it gave a clean bill of health I installed Win this morning and in the last hours I have had dumps Any help is much appreciated I am working on uploading the zip but since it crashes so often it is being troublesome to pull down the exe and run it Submitting this thread from laptop while I try to get the info from the main computer

A:Fresh Build - Constant BSOD - Multiple Codes - 3b, 50, a

Zip is attached

http://www.sevenforums.com/bsod-help-support/229035-fresh-build-constant-bsod-multiple-codes-3b-50-a.html
Relevancy 64.07%

Hi I hope someone can clue me in on what s going on with my system Windows Home Premium bit I am having regular BSOD code WHEA errors When I look Hirearchy build Constant self PC Errors and on BSOD Cache in the event viewer I have lots error id WHEA errors quot Cache Hierarchy Error quot usually on Core but occasionally on core I get a bunch of them on start-up and then every seconds until BSOD which happens at seemly random times and on any load As likely to BSOD when gaming as when idle I have read every forum I can but nothing with this specific issue I have Constant BSOD and Cache Hirearchy Errors on self build PC ran every hardware diagnostic tool I can find Memory seems fine ran memtest for hours with no errors I replaced the PSU CX with a EVGA W G I know its overkill for my system but I got it for a good price I have stress tested the CPU with Intel Extreme tuning Utility and on max load for hours I got max temp of degrees Idle temp is around degrees so I don't think its a temp issue I have carried out these tests with and without the GPU installed I have no overclock and the latest BIOS I tried a clean reinstall of windows and with nothing but the OS Constant BSOD and Cache Hirearchy Errors on self build PC loaded I was still having the same issue I tried an update to windows and it would BSOD seconds after loading my desktop in a continual loop So I went back to Windows I also get the error in safe mode but no BSOD I can remove the errors by only enabling core in the BIOS Everything else in the BIOS is at its default Constant BSOD and Cache Hirearchy Errors on self build PC settings As far as I can tell all my drivers are up to date I built this system in Nov and its been great no issues at all until weeks ago System i K MSI Gaming MOBO EVGA Supernova G PSU Palit GTX GB x GB Corsair Vengeance DDR MHz V running at Mhz with V Seagate TB ST hybrid drive Sandisk GB SSD I'll post the dump files as soon as I get a chance Thanks in advance for any input

http://www.sevenforums.com/bsod-help-support/385424-constant-bsod-cache-hirearchy-errors-self-build-pc.html
Relevancy 64.07%

Hey Everyone This is a new system build and it was working fine until a week after I had built it The first blue screen I got was when I was uploading a video to youtube and now I seem to get them randomly fairly often apart from when I m playing games which is odd just browsing the internet etc So far I ve done tests on my hard drives to see if they re healthy and they have passed HD Tune however I seem to always get blue screens when I try and upload a video to youtube from either of the hard drives I ve tried them plugged in one at a time but it doesn t blue screen when I upload from the SSD on its own this could just be a coincidence though as it blue screened with just the SSD in when I left the computer idle overnight I ve run memtest on my ram which didn t come up with any errors and I ve re-seated it just to check if it was okay I ll upload a dumps New ntoskrnl.exe? crash Computer BSOD Build Multiple zip of my Minidump now using BlueScreenView seems to point towards ntoskrnl exe but this is my first time using BlueScreenView so I m not sure if that s common or w e Another thing to add is that I seem to get program instability e g steam closing when it feels like it and chrome crashing for no reason however playing the mmo neverwinter seemed to work fine located on a different drive to the OS SDD Win Ultimate x I - BSOD New Computer Build ntoskrnl.exe? Multiple crash dumps K MSI z -g Crucial x GB mhz Ballistix RAM Samsung Pro SSD x Seagate rpm tb HDD s Asus Xonar d x Soundcard Corsair CX W MSI Geforce GTX Any help would be greatly appreciated

A:BSOD New Computer Build ntoskrnl.exe? Multiple crash dumps

There seems to be a problem with your Windows activation. Please post this report: Activation Issue Posting Instructions

http://www.sevenforums.com/bsod-help-support/303353-bsod-new-computer-build-ntoskrnl-exe-multiple-crash-dumps.html
Relevancy 64.07%

Hi Guys I would greatly appreciate your insight into bsod's New - management multiple build RecFltr.sys,ntoskrnl.exe,memory some problems I am having with New build - multiple bsod's RecFltr.sys,ntoskrnl.exe,memory management a new build I am an IT systems engineer so be as technical as you like with the replies I'd apprecaite them I recently decided to upgrade my build and bought a nice kit and graphics card as outlined below ASUSTeK Computer INC M A LT-M-LE AM AMD Athlon II X GB Dual-Channel DDR ATI Radeon HD I installed windows ultimate bit and installed all the latest drivers for the system The problem is that I have had multiple blue screens since I built it one week ago I ran memtest and windows memory diagnostic tool and both identified memory errors I don't overclock but I got the OCCT stability tester and it identified problems in the cores I do know though that these errors can be caused by other problems and wanted to get yer opinion on the mini dumps which I have attached I ran the driver verifier and that immediately caused blue screens for RecFltr sys My parts are all under warranty so do you think its hardware or driver New build - multiple bsod's RecFltr.sys,ntoskrnl.exe,memory management based I appreciate the insight and second third and fourth opinions New build - multiple bsod's RecFltr.sys,ntoskrnl.exe,memory management if we can get them Thanks

A:New build - multiple bsod's RecFltr.sys,ntoskrnl.exe,memory management

  
Quote: Originally Posted by jiraiya


Hi Guys,
I would greatly appreciate your insight into some problems I am having with a new build. I am an IT systems engineer so be as technical as you like with the replies, I'd apprecaite them. I recently decided to upgrade my build and bought a nice kit and graphics card as outlined below.

ASUSTeK Computer INC. M4A78LT-M-LE (AM3)
AMD Athlon II X4 645
4.00 GB Dual-Channel DDR3
ATI Radeon HD 5770

I installed windows 7 ultimate 64 bit and installed all the latest drivers for the system. The problem is that I have had multiple blue screens since I built it one week ago. I ran memtest86+ and windows memory diagnostic tool and both identified memory errors. I don't overclock but I got the OCCT stability tester and it identified problems in the cores. I do know though that these errors can be caused by other problems and wanted to get yer opinion on the mini dumps which I have attached. I ran the driver verifier and that immediately caused blue screens for RecFltr.sys. My parts are all under warranty so do you think its hardware or driver based. I appreciate the insight and second, third and fourth opinions if we can get them.
Thanks.


These were both verified and Related to RecFltr.sys from Microsoft Reclusa gaming keyboard, powered by Razer?. I would re-install the driver with newest.


I would also re-run memtest.

http://www.sevenforums.com/bsod-help-support/172817-new-build-multiple-bsods-recfltr-sys-ntoskrnl-exe-memory-management.html
Relevancy 64.07%

Hello I was hoping to get some help from you experts on what is causing the BSOD I keep getting related to a DRIVE_POWER_STATE_FAILURE. I have attached the zip file as needed.

Thanks

A:Random BSOD on new custom build / ntoskrnl.exe+72a40 0x0000009f

I seem to be getting these BSODs daily now and it is always the same DRIVE_POWER_STATE_FAILURE. I haven't noticed any real common things happening each time it happens. I have gone through and tried to update several drivers to see if that would help but it doesn't seem to have.

http://www.sevenforums.com/bsod-help-support/369004-random-bsod-new-custom-build-ntoskrnl-exe-72a40-0x0000009f.html
Relevancy 63.64%

hi guys,

i have experienced a BSOD. in attachment is a .zip with all data.

http://www.sevenforums.com/bsod-help-support/392165-bsod-hal-dll-12a3b.html
Relevancy 63.64%

Hi Guys This is my first attempt at building my own computer so I am not a pro by any means I've been having issues with blue screens ever since I put the thing together All the parts are new out of the box When I first put the machine together I did some troubleshooting on my own and with a NewEgg custom on Various - BSOD Constant Minidump build new 0x0000003b Errors tech The tech couldn't pin point the issue so he advised me to RMA the motherboard and RAM I got the replacement motherboard and RAM a few days ago but the issue persists I am using BlueScreenView to look at my minidump files BlueScreenView is listing all kinds of drivers and errors Nothing Constant BSOD on new custom build - Various Minidump Errors 0x0000003b really consistent The time between crashes is also Constant BSOD on new custom build - Various Minidump Errors 0x0000003b random Sometimes it will crash when I login to windows and sometimes it will take a couple hours depending on what I am doing I have noticed that I can crash it by opening a bunch of browser tabs and windows Here is a list of things Constant BSOD on new custom build - Various Minidump Errors 0x0000003b I have tried RMA motherboard and ram Downloaded latest drivers from gigabyte website and nvidia Removed graphics card and used built in graphics Have not tried with new RMA parts Updated motherboard BIOS from F to F version Disabled built in graphics from BIOS menu Tried stick of ram at a time Have not tried with new RMA parts MemTest got Zero errors Reinstalled OS tired this with original parts and with new RMA parts Uninstalled anti virus Updated fireware on ssd drive c drive I've don't troubleshooting with NewEgg techs and Gigabyte techs and so far nothing has helped This was supposed to be my dream pc but it has quickly turned into a huge nightmare Any help you guys could offer would be greatly appreciated I am honestly thinking about giving up at this point

A:Constant BSOD on new custom build - Various Minidump Errors 0x0000003b

Please follow | Windows Genuine and Activation Issue Posting Instructions

http://www.sevenforums.com/bsod-help-support/301082-constant-bsod-new-custom-build-various-minidump-errors-0x0000003b.html
Relevancy 63.64%

Hi All I recently put together a BSOD [Solved] - New Restarts & W10 Occasional Random Constant Build new rig and the specs are as follows Specs CPU - i k Motherboard - ASUS Strix X Latest Bios Graphics - EVGA GTX RAM - Corsair DDR MHz GB CMD GX M B C SSD - Samsung Pro GB PSU - Corsair AX i W Issue I ve been coming across issues from the get go with Windows At first I was experiencing a lot [Solved] W10 Constant Random Restarts & Occasional BSOD - New Build of BSOD issues which to me appeared to either be driver or memory related This was even after updating to the latest drivers from Nvidia for graphics latest drivers from ASUS for chipset audio ethernet amp WiFi and Samsung NVMe [Solved] W10 Constant Random Restarts & Occasional BSOD - New Build driver for the Pro Page Fault In Nonpaged Area Pool Corruption In File Area Driver Overran Stack Buffer IRQL Not Less or Equal So I decided to do another clean install and try and tackle it step by step Now I m finding that after a clean install and letting windows install all the latest updates prior to installing any software or driver updates Windows will stutter a bit and then randomly restart It will constantly do this and only this morning I m finding it is going to a blank screen after Windows login Attempted So far I ve tried the following Memtest on each RAM Stick Checked out on passes Clean install Windows multiple times and feels like its getting worse and sluggier each time Latest Driver Install from ASUS amp Nvidia BIOS Settings Default i e turned off XMP Profiles Re-enabled CSM I m out of ideas and no step closer to figuring out if its hardware issue or software Windows related I can rule out RAM from the memtest I m hoping to dump the GTX into my partner s computer tonight to see if its the card issue I ll probably try another clean install of W on an older SSD tonight If that fails I ll go back to W and see if I have the same issue Not sure how to rule out Motherboard CPU and PSU issues though If anyone has any suggestions or leads it d be much appreciated and thanks in advance --------------- Issue is solved In the end it turned out the RAM was faulty After RMA ing to Corsair and receiving my replacement RAM the PC has been running smoothinly Thanks all again for the suggestions and assistance nbsp

A:[Solved] W10 Constant Random Restarts & Occasional BSOD - New Build

If you can login or transfer the existing C:\Windows\minidump & memory.dmp. You can install the Debugging Tools on that pc, or I think another pc, and run windbg.exe to find the cause.
You can use this to install just the debugging tools Windows 10 SDK - Windows app development (it installs to Program Files (x86)\Windows Kits\10\Debuggers\x64\windbg.exe)
 

https://hardforum.com/threads/solved-w10-constant-random-restarts-occasional-bsod-new-build.1906217/
Relevancy 62.78%

Ok, so this is actually the third time I've posted here. I keep getting BSoD about once a week, I post here, someone suggests a driver update, I update that driver, then everything seems fine. Then about a week later it crashes again. I don't overclock my system, nothing is over-heating, and at this point I think I've updated all my drivers and Bios. I could be wrong though. I apologize if I'm just an idiot or something and am missing something obvious, but any help would be appreciated. Please see attached .zip file.

A:BSoD x024, hal.dll+12a3b

1: Avast is causing issues.


Code:
fffff880`0a1f5818 fffff880`03e2b7fbUnable to load image \SystemRoot\system32\drivers\aswSnx.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for aswSnx.sys
*** ERROR: Module load completed but symbols could not be loaded for aswSnx.sys
aswSnx+0xe7fb
Uninstall Avast and Install MS Security Essentials and MalwareBytes.



   Note
Make sure you uncheck the 'Enable Free Trial' box when installing.


2: Your ATI driver is old and needs updating.


Code:
0: kd> lmvm atikmdag
start end module name
fffff880`0482b000 fffff880`05341000 atikmdag T (no symbols)
Loaded symbol image file: atikmdag.sys
Image path: \SystemRoot\system32\DRIVERS\atikmdag.sys
Image name: atikmdag.sys
Timestamp: Wed Dec 19 20:38:55 2012 (50D225DF)
CheckSum: 00AC6529
ImageSize: 00B16000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Download the 13.9 driver from here then use AMD Uninstall Utility to remove all traces of your current driver, CCC etc. Reboot and install the 13.9 driver.



   Note
When installing choose 'Advanced' or 'Custom' (whichever option is available, just not Express) and uncheck everything except the video driver.
3: You've also received a few 0x124s which denote a hardware issue, but none of them are giving anything away as to what the issue actually is. Some of your other STOPs are pointing towards possible memory corruption though, so before we go into the full catalogue of hardware checks to stress your system follow the tutorial below to test your RAM first.


Code:
1: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa8007aab028, Address of the WHEA_ERROR_RECORD structure.
Arg3: 00000000b60e4000, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000000000135, Low order 32-bits of the MCi_STATUS value.
Download and run MemTest86+ to test your RAM.



   Note
Run MemTest86+ for at least 8 passes. Ideally set it off before you go to bed and leave it overnight, we're looking for zero errors here. A single error will show something's going bad with your RAM.
It's possible your BIOS may be causing issues as it's quite old and may need updating, however we'll leave that until very last as flashing your BIOS does carry a substantial amount of risk which could lead to you turning your PC into a potato.

Did you actually update your BIOS in between some of these dumps occurring?


Code:
1: kd> !sysinfo machineid
Machine ID Information [From Smbios 2.5, DMIVersion 0, Size=2420]
BiosMajorRelease = 8
BiosMinorRelease = 15
BiosVendor = American Megatrends Inc.
BiosVersion = 0211
BiosReleaseDate = 07/08/2009

Code:
1: kd> !sysinfo machineid
Machine ID Information [From Smbios 2.5, DMIVersion 0, Size=2420]
BiosMajorRelease = 8
BiosMinorRelease = 15
BiosVendor = American Megatrends Inc.
BiosVersion = 2105
BiosReleaseDate = 07/23/2010

http://www.sevenforums.com/bsod-help-support/336994-bsod-x024-hal-dll-12a3b.html
Relevancy 62.78%

Hello all - I need help figuring out what is causing this BSOD. This is occurring during gaming after several straight hours. CPU is currently not overclocked. Here is the BSV report:

==================================================
Dump File : 081113-5928-01.dmp
Crash Time : 8/11/2013 1:50:00 AM
Bug Check String :
Bug Check Code : 0x00000124
Parameter 1 : 00000000`00000000
Parameter 2 : fffffa80`0d4de028
Parameter 3 : 00000000`be000000
Parameter 4 : 00000000`0100110a
Caused By Driver : hal.dll
Caused By Address : hal.dll+12a3b
File Description : Hardware Abstraction Layer DLL
Product Name : Microsoft? Windows? Operating System
Company : Microsoft Corporation
File Version : 6.1.7601.17514 (win7sp1_rtm.101119-1850)
Processor : x64
Crash Address : ntoskrnl.exe+75c00
Stack Address 1 :
Stack Address 2 :
Stack Address 3 :
Computer Name :
Full Path : C:\Windows\Minidump\081113-5928-01.dmp
Processors Count : 4
Major Version : 15
Minor Version : 7601
Dump File Size : 292,992
Dump File Time : 8/11/2013 1:50:30 AM
==================================================

Any guidance would be greatly appreciated...I hate these kinds of problems I just built my computer it is only 1 week old... :(

A:BSOD hal.dll+12a3b (Merged)

Hi,

Please refer to the following thread and reply back accordingly with the required information - http://www.techsupportforum.com/foru...ta-452654.html

Regards,

Patrick

http://www.techsupportforum.com/forums/f299/bsod-hal-dll-12a3b-merged-704344.html
Relevancy 62.78%

Hi there so recently I've changed my PC set mb to Gigabyte GA-Z -HD CPU to i - k GPU to MSI GTX G After a week or Random 'hal.dll+12a3b' BSOD so random BSOD came by to say 'hello' to me RAM SSD PSU and other stuff are exactly the Random BSOD 'hal.dll+12a3b' same as previous PC and worked fine before changing Most of the time BSOD happen' when system is working on IDLE Never happen during gaming nor watching movie Temps are OK I did reset my CMOS setting as this CPU was OC'd to GHz now on default RAM seems to be OK although didn't test it in memtest yet but Random BSOD 'hal.dll+12a3b' as mentioned weeks ago on old setup didn't notice any BSOD for a very long time Gigabyte's EasyTune was also removed All drivers are up to date same for win updates thank Random BSOD 'hal.dll+12a3b' you in advance for your time and help Karol EDIT Memtest passed I did my own investigation while waiting to reply found out ubssrv oc only is common failure process Regarding to some posts few from here I've uninstalled iCloud app from Gigabyte Will update this thread if its gonna fix BSODs

A:Random BSOD 'hal.dll+12a3b'

Your latest dumps are all 124 errors and these are typically related to a hardware issue and can only be isolated by stress testing the major components.

If overclocking, reset all overclocks back to their default settings and then follow these:
RAM - run for a minimum of 8 consecutive passes
RAM - Test with Memtest86+
CPU - run the HIGH test
CPU - Stress Test Using IntelBurnTest
Video - run the FURMARK test for 20mins
Graphics Card Problems - Diagnose
Video Card - Stress Test with Furmark
Storage - run the SHORT test using the DOS version
SeaTools for DOS and Windows - How to Use


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 124, {0, fffffa800767f028, bf800000, 200401}
Probably caused by : GenuineIntel
Followup: MachineOwner
---------

http://www.sevenforums.com/bsod-help-support/368412-random-bsod-hal-dll-12a3b.html
Relevancy 62.78%

Hi Forums I recently bought a new computer from a pc build website I installed Win install, ntoskrnl/win32k Win7 Custom New BSOD issues Fresh Build, HP bit and started to instantly experience BSODs After a bit of diagnostics memtest told me that one of the RAM sticks was horrifically broken New Custom Build, Fresh Win7 install, BSOD issues ntoskrnl/win32k that has since been sent off for replacement and the system has been 'more' stable with only gb However I have still been experiencing BSODs specifically when the computer isn't doing very much of anything I have been trying to play BF which as you will probably know is littered with awful programming and has constant crashes generally though of the time these are 'soft crashes' and I can ctrl alt delete and end the process Most of the BSODs seem to not actually be related to the game crashing though may have come about because I have been trying to update my drivers etc etc to stop the constant game crashes I have done another fresh install since removing one of the gb ram sticks and did the usual driver installs updates and microsoft important updates I then went through and re-installed all my usual programs - vlc skype CCcleaner malwarebytes adobe air flash postgresql bbflashback video recorder MSE Since my last fresh install on the th November I have had BSODs many of which have come about when the computer is either basically idle or i'm watching a youtube video or just browsing files in explorer rather than whilst playing bf or doing more intense stuff x system service exception x kmode exception not handled x memory management x page fault in nonpaged area All my drivers are as far as I can see up to date where possible I auto detect Hopefully I have done this properly and included all information required in my pc specs pane and from the SFDTool Thanks in advance this has been a very frustrating and confusing few weeks The computer can work for hours on end absolutely fine including to play bf at high fps on high settings then suddenly doing nothing it crashes multiple times lsaw EDIT- As per the nd post in this thread- ntoskrnl exe BSOD randomly As far as I know nothing is OC I only put MSE on there I haven't run Chkdsk since this fresh install but had run it previously on my other installs Similarly I had run SFC before and got no errors Will check - now and potentially go back and redo steps and

A:New Custom Build, Fresh Win7 install, BSOD issues ntoskrnl/win32k

Hi lsaw2.

Your crash dumps are not showing finite cause, but they are stop 0x3B, usually caused either by RAM or by any driver failure..

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.
If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

If memtest86+ is free from errors, enable Driver Verifier to monitor the drivers.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.



   Information
Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.



   Warning
Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.



   Tip

If you fail to get on the Desktop because of DV, Boot into Advanced Boot Options > Safe mode. Disable DV there. Now boot normally again, and try following the instruction of enabling DV again.
If you cannot boot in Safe mode too, do a System Restore to a point you made earlier.

Let us know the results, with the subsequent crash dumps, if any.

http://www.sevenforums.com/bsod-help-support/313783-new-custom-build-fresh-win7-install-bsod-issues-ntoskrnl-win32k.html
Relevancy 62.35%

Hi,

ive been getting these BSOD's for a while now, but only when playing certain games(Mostly HoN, Dota2, WoW, assassins creed etc) they never happen when im using the PC for other requirements.

I've tried re seating the RAM/Vid card etc, nothing helps. I even open it up weekly and clean out the dust from it.

Im currently in the process of removing on certain RAM modules and will try my older video card as well.

My system specs are as follows :

Windows 7 Ultimate 64bit

Intel Core i7 920 @2.67 Ghz

RAM : 12gb DD3

GFX : Nvidia GTX 460 cyclone

MB : Msi X-58 Pro E



Any help would be appreciated!

A:BSOD while gaming only Hal.dll+12a3b, 0x124

1. Your .dmp file shows a stop error of 0x124 which is a general hardware error .





Quote:
A "stop 0x124" is fundamentally different to many other types of bluescreens because it stems from a hardware complaint.

Stop 0x124 minidumps contain very little practical information, and it is therefore necessary to approach the problem as a case of hardware in an unknown state of distress


Some generic advice.

If you are overclocking STOP. Return to the default settings at least for now.
If you are running a RAID update its driver.
You can read more on this error and what to try here... Stop 0x124 - what it means and what to try
2. Avast can be a contributing cause of BSOD'S .
Please remove and replace with Microsoft Security Essentials AT LEAST TO TEST
http://files.avast.com/files/eng/aswclear5.exe

http://www.microsoft.com/security_essentials/

http://www.sevenforums.com/bsod-help-support/216251-bsod-while-gaming-only-hal-dll-12a3b-0x124.html
Relevancy 60.63%

hi all dave here i am having nothing but bad luck with windows ntoskrnl.exe update(new build) ntkrnlmp.exe after and this build it originall went out at xmas time since then i have ntoskrnl.exe and ntkrnlmp.exe after windows update(new build) reimaged it twice this is the rd time when i get it back i can't even repair windows with the recovery disk i made i have stripped it down to the bare essentials to run i installed a new hdd reinstalled windows and updated until it would update no more i had prev replaced power supply rma-ed the ram i ran prime for hours with no faults i reloaded most of the software i orig found on the computer and ran it again for hrs no faults i updated once more this time installing windows suggested drivers All hell broke loose comp wouldn't boot wouldn't post properly for the st attempts then started it wanted to do a startup repair i let it do that it took over mins to get to a desktop oh oh i said to my self i have whocrashed loaded on already so i ran that it reported the errors i mentioned in the title ntoskrnl exe and ntkrnlmp exe made a reference to the athros ethernet adapter i rolled back the driver and rebooted i thought i was in the clear until it bsod-ed on me while i was readin the dump files i m pretty frustrated at the moment and looking for some assistance please

A:ntoskrnl.exe and ntkrnlmp.exe after windows update(new build)

Code:
ASACPI.sys Sun Mar 27 22:30:36 2005 (42476C4C)
A known BSOD maker in Windows 7. The 2005 version of this driver is known to cause BSOD on Windows 7 systems.
Download the ATK0110 utility from here - ASUSTeK Computer Inc. -Support- Drivers and Download P7P55D LE.
After you install it browse to C:\windows\system32\drivers and check the properties of ASACPI.sys and make sure it now says 2009.


Code:
L1E62x64.sys Thu Jun 11 02:45:22 2009 (4A30A802)
Update your Atheros driver - Atheros Communications

Run a system file check - SFC /SCANNOW Command - System File Checker

Please run these tests and report back the results
1. Memtest86 - Run for 7-8 passes - RAM - Test with Memtest86+
2. Prime95 - Run all three tests (Small FFTs, Large FFTs, Blend) for 3-4 hours each or until fail - http://www.sevenforums.com/tutorials...t-prime95.html
3. Hard drive scan using SeaTools - SeaTools for Windows | Seagate - Both long and short tests

BSOD BUGCHECK SUMMARY

Code:

Built by: 7601.17592.amd64fre.win7sp1_gdr.110408-1631
Debug session time: Fri Jun 3 12:47:44.912 2011 (UTC - 4:00)
System Uptime: 0 days 0:01:02.068
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+4621f )
BUGCHECK_STR: 0x50
PROCESS_NAME: lsass.exe
FAILURE_BUCKET_ID: X64_0x50_nt!_??_::FNODOBFM::_string_+4621f
BiosReleaseDate = 08/20/2010
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.17592.amd64fre.win7sp1_gdr.110408-1631
Debug session time: Thu Jun 2 19:43:30.977 2011 (UTC - 4:00)
System Uptime: 0 days 0:04:40.132
*** WARNING: Unable to verify timestamp for L1E62x64.sys
*** ERROR: Module load completed but symbols could not be loaded for L1E62x64.sys
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : memory_corruption
BUGCHECK_STR: 0xA
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_MEMORY_CORRUPTION_ONE_BIT
BiosReleaseDate = 08/20/2010
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
??????????????????????????????????????????????????????????????????????????????????????``

http://www.sevenforums.com/bsod-help-support/167059-ntoskrnl-exe-ntkrnlmp-exe-after-windows-update-new-build.html
Relevancy 60.2%

The title is pretty self-explanatory; I keep getting BSOD on steam games, particularly DotA and Civ V. I've been supremely bored without my vidjya, so any help would be much appreciated! I've attached the requisite BSOD paperwork, and am pasting some more stuff, and my system specs should be in my profile.

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033


Additional information about the problem:
BCCode: 124
BCP1: 0000000000000000
BCP2: FFFFFA8008323028
BCP3: 00000000B6004000
BCP4: 00000000DC000175
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1


Files that help describe the problem:
C:\Windows\Minidump\061114-19515-01.dmp
C:\Users\Andrew\AppData\Local\Temp\WER-27580-0.sysdata.xml

Bug Check Code:

0x00000124

Caused by Driver:

hal.dll

Last Two attempted addresses
Filename: Address in Stack:

hal.dll hal.dll+12a3b


ntoskrnl.exe ntoskrnl.exe+18c463

A:BSOD playing Steam games, Bug 0x00000124, Driver: hal.dll+12a3b

Hello, and welcome to SevenForums!

First of all, have you overclocked your graphics card at all?

The 0x00000124 error code appears during a hardware complaint, such as overheating. If you have overclocked your GPU, RESET IT IMMEDIATELY. This could be causing numerous critical errors in your GPU, causing the whole system to crash. Also, overclocking can severely damage your GPU. I would only recommend it if you know what you are doing and are not just following a tutorial.

But, this could be other things too. I see that your GPU driver is WAY out-of-date. Download the latest drivers via the AMD website.

Best of luck,

PeregrineX

http://www.sevenforums.com/bsod-help-support/335037-bsod-playing-steam-games-bug-0x00000124-driver-hal-dll-12a3b.html
Relevancy 59.77%

Hi I just built my computer about a month and a half ago and made sure my hardware was secured tightly and properly onto the mother board I updated all of the drivers youtube any error hal.dll+12a3b playing video BSOD or streams online for the PC to the best of my knowledge due to receiving BSOD in the beginning partly because the drivers were not up to date BSOD playing youtube or any online video streams error hal.dll+12a3b After the driver updates everything is working great from playing games and the usual day to day use of the PC But when I started streaming two windows of online videos from either youtube or any other video site thats when it started to give me the BSOD But it was sporadic and not crashing with every single video playback It would crash on some videos and not on others I did some research and found a software called bluescreenview which captures the BSOD codes and this was what I found hal dll a b I don't understand what this code means because based on my research it could be multiple factors Please help me Thank you - OS Windows bit - OS was full retail - Age of the system is about two months old now - Age of the OS installation is about two months old Other hardware specs CPU Intel i - K GHz Gigs of RAM

A:BSOD playing youtube or any online video streams error hal.dll+12a3b

All of them are the HAL for Windows reporting that your CPU has detected an internal failure. Given the strong consistency for these errors (they're all identical with the same cpu cache bank referenced), I'm afraid your CPU has most likely kicked the bucket.

Before you proceed on anything, if you have your system overclocked in any way, shape or fashion, reset to factory defaults. It's good sense that despite previous success with overclocking, if a system starts getting unstable, the first thing one should blame is the overclocking and reset as a result. Even if it isn't, it can easily be returned to its previous settings.

Anyways, I have sometimes seen software bugs arise that would cause this, and even once I seen a video card cause this problem (how, I have absolutely no clue). First of all, if you have any software that came with your motherboard besides the drivers, uninstall them. I've found they are very buggy as well as gimmicky, and strangely they have usually caused WHEA errors like this, making it appear the hardware is at fault. Second, update your BIOS if you haven't already, as that can potentially cause this. Lastly, run MemtestCL on your video card. Note that since you have an ATI card, you'll need to download and install the ATI APP SDK first, as it requires OpenCL.

Those should cover any potential edge cases that could create these WHEA errors. However, my opinion would be that this is certain hardware (CPU). The causes mentioned previously have the potential to create WHEA errors, but honestly, the specific WHEA error reported here is micro-architectural failure, which is most certainly the CPU's prob.

http://www.sevenforums.com/bsod-help-support/218384-bsod-playing-youtube-any-online-video-streams-error-hal-dll-12a3b.html
Relevancy 54.18%

Hello for the last - weeks i have Constant ntoskrnl.exe CPU Usage noticed that ntoskrnl exe uses constantly - CPU http i imgur com KYahr E png I don't think that it should behave like that I have tried a lot of things such as sfc scannow DISM exe Online Cleanup-image Scanhealth DISM exe Online Cleanup-image Restorehealth sfc scannow CMD C Windows system gt sfc scannow Beginning system scan This process will take some time Beginning verification phase of system ntoskrnl.exe Constant CPU Usage scan Verification complete Windows Resource Protection found corrupt files ntoskrnl.exe Constant CPU Usage and successfully repaired them Details are included in the CBS Log windir Logs CBS CBS log For example C Windows Logs CBS CBS log Note that logging is currently not supported in offline servicing scenarios DISM exe CMD C Windows system gt DISM exe Online Cleanup-image Scanhealth Deployment Image Servicing and Management tool Version Image Version The component store is repairable The operation completed successfully C Windows system gt DISM ntoskrnl.exe Constant CPU Usage exe Online Cleanup-image Restorehealth Deployment Image Servicing and Management tool Version Image Version Error x f The source files could not be downloaded Use the source option to specify the location of the files that are required t o restore the feature For more information on specifying a source location see http go microsoft com fwlink LinkId The DISM log file can be found at C Windows Logs DISM dism log But nothing really helped I have all windows updates installed including optional Is this normal Is there a way to fix this Thank you

A:ntoskrnl.exe Constant CPU Usage

Please download and install Speccy to provide us with information about your computer.  Clicking on this link will automatically initiate the download. 
 
When Speccy opens you will see a screen similar to the one below.
 

 
Click on File which is outlined in red in the screen above, and then click on Publish Snapshot.
 
The following screen will appear, click on Yes.
 

 
The following screen will appear, click on Copy to Clipboard.
 

 
In your next post right click inside the Reply to Topic box, then click on Paste.  This will load a link to the Speccy log.

 
==========
 
Please download MiniToolBox, save it to your desktop and run it.
 
Checkmark only the following checkboxes:
 
• List last 10 Event Viewer log
• List Installed Programs
• List Users, Partitions and Memory size.
• List Minidump Files
 
Click on Go to start the scan.  Once it is finished highlight the text, copy it and paste it in your next post.

http://www.bleepingcomputer.com/forums/t/575545/ntoskrnlexe-constant-cpu-usage/
Relevancy 54.18%

My computer is constantly re-booting about every - hours The minidump files start back from May th ntoskrnl.exe re-boot constant and have been going ever since I currently have files I have downloaded and installed bluescreenview and I would post the content here but I figured they'd be way to large I figured I'd post file Can anyone give me some guidance to fix this very annoying issue Thanks Todd Dump file Mini - dmp Crash time PM Bug check string REGISTRY ERROR Bug check code x Parameter x Parameter x Parameter xe a Parameter x Caused by driver ntoskrnl exe Caused by address ntoskrnl exe fa File description NT Kernel amp System Product name Microsoft Windows Operating System Company Microsoft Corporation File version xpsp sp qfe - Processor -bit Crash address ntoskrnl exe fa Stack address ntoskrnl exe a c Stack address ntoskrnl ntoskrnl.exe constant re-boot exe e Stack address ntoskrnl exe Full path C WINDOWS minidump ntoskrnl.exe constant re-boot Mini - dmp Processors count Major version Minor version Dump file size Dump file date PM

A:ntoskrnl.exe constant re-boot

Please download MiniToolBox  , save it to your desktop and run it.
 Checkmark the following checkboxes:  List last 10 Event Viewer log  List Installed Programs  List Users, Partitions and Memory size.
 Click Go and paste the content into your next post.
 Also...please Publish a Snapshot using Speccy - http://www.bleepingcomputer.com/forums/topic323892.html/page__p__1797792#entry1797792 , taking care to post the link of the snapshot in your next post.
 
Louis

http://www.bleepingcomputer.com/forums/t/551526/ntoskrnlexe-constant-re-boot/
Relevancy 54.18%

Posting this from my old win xp system so please bear with me Got the bluescreen with ntoskrnl exe listed Can not load win in normal mode Will load in safe mode but crashes when I try and launch anything also crashes after ruining for a few min It is difficult to get information off the win system even right clicking my computer crashes the system Managed to get the crash dumps copied I created a folder called minidump on the xp system copied a crash dump from the win system into it and ran BSOD Dump amp System File Collection app crashes constant NTOSKRNL.EXE I am unable to run a system health report I removed the video card and tried using the on-board video but it did not NTOSKRNL.EXE constant crashes resolve the crash I removed all but stick of ram and tried it in all slots also with other stick but it did not resolve the crash I loaded the bios and applied fail safe defaults but it did not resolve the crash It is the bit version of win The ram motherboard and processor are about a year old All other system components are years old I have zipped the first and most recent crashdump files as well as the output of the BSOD Dump amp NTOSKRNL.EXE constant crashes System File Collection app in separate files If anyone can help me with this I would be grateful If there is any other information I can supply I will NTOSKRNL.EXE constant crashes try my best to do so Thank you for your time

A:NTOSKRNL.EXE constant crashes

  
Quote: Originally Posted by TheOven


Posting this from my old win xp system so please bear with me.

Got the bluescreen with ntoskrnl.exe listed.

Can not load win7 in normal mode.

Will load in safe mode but crashes when I try and launch anything, also crashes after ruining for a few min.

It is difficult to get information off the win7 system, even right clicking my computer crashes the system.

Managed to get the crash dumps copied.

I created a folder called minidump on the xp system, copied a crash dump from the win7 system into it and ran BSOD Dump & System File Collection app.

I am unable to run a system health report.

I removed the video card and tried using the on-board video but it did not resolve the crash.

I removed all but 1 stick of ram and tried it in all slots, also with other stick, but it did not resolve the crash.

I loaded the bios and applied fail safe defaults but it did not resolve the crash.

It is the 64bit version of win7

The ram, motherboard, and processor are about a year old. All other system components are 3+ years old.

I have zipped the first and most recent crashdump files as well as the output of the BSOD Dump & System File Collection app in separate files.

If anyone can help me with this I would be grateful.

If there is any other information I can supply I will try my best to do so.
Thank you for your time



Several problems. Obviously you didnt do a clean win 7 install. Bios64.sys is from 2003 and could use some serious updating.
Sptd.sys a known cause of BSOD's. remove and replace

Please remove any CD virtualization programs such as Daemon Tools and Alcohol 120%.

They use a driver, found in your dmp,sptd.sys, that is notorious for causing BSODs.

Use this SPTD uninstaller DuplexSecure - Downloads

when you're done you can use this Freeware MagicISO Virtual CD/DVD-ROM(MagicDisc) in its place.
5 copies of the Wsaudio.sys driver remove all but one.
Then I would run a system file check

Run a system file check to verify and repair your system files.
To do this type cmd in search, then right click to run as administrator, then
SFC /SCANNOW

Read here for more information SFC /SCANNOW Command - System File Checker

Let us know the results from the report at the end.


Code:
BIOS64.sys 6/7/2003 8:12:00 PM fffff880`03bd8000 fffff880`03be0000 0x00008000 0x3ee27f50
sptd.sys 10/11/2009 4:55:14 PM fffff880`00e66000 fffff880`00f8c000 0x00126000 0x4ad24632
WsAudio_DeviceS(1).sys 7/23/2009 8:04:10 AM fffff880`03c00000 fffff880`03c0b000 0x0000b000 0x4a6851ba
WsAudio_DeviceS(2).sys 7/23/2009 8:04:10 AM fffff880`03cad000 fffff880`03cb8000 0x0000b000 0x4a6851ba
WsAudio_DeviceS(3).sys 7/23/2009 8:04:10 AM fffff880`03cb8000 fffff880`03cc3000 0x0000b000 0x4a6851ba
WsAudio_DeviceS(4).sys 7/23/2009 8:04:10 AM fffff880`03cc3000 fffff880`03cce000 0x0000b000 0x4a6851ba
WsAudio_DeviceS(5).sys 7/23/2009 8:04:10 AM fffff880`03cce000 fffff880`03cd9000 0x0000b000 0x4a6851ba

http://www.sevenforums.com/bsod-help-support/178683-ntoskrnl-exe-constant-crashes.html
Relevancy 53.32%

Hey guys so I've been getting some random BSOD errors every few days or so I usually leave my computer on when I am at work or sleep and either when I come home Random BSOD error ntoskrnl.exe (address driver ntoskrnl.exe+74ec0) or wake up my computer is off So I turn it on and it says that the computer didn't Random BSOD error driver ntoskrnl.exe (address ntoskrnl.exe+74ec0) shut down properly when I start up I downloaded the BlueScreenView and noticed I've had some BSOD three times within days One Random BSOD error driver ntoskrnl.exe (address ntoskrnl.exe+74ec0) was a PAGE FAULT IN NONPAGED AREA error which I believe was a RAM problem i bought new RAM and installed it plus OCed it to but I believe it was making my system unstable so I reset the speed to default and haven't gotten that error again but after that I've gotten two IRQL NOT LESS OR EQUAL errors related to ntoskrnl exe I did some research online and from what I read it could be a number of problems I'm just not sure where to start and could really use some guidance and advice I uploaded my dmp files for anyone who knows how to look at these Thank in advance

A:Random BSOD error driver ntoskrnl.exe (address ntoskrnl.exe+74ec0)

Welcome to 7F. I'll take a look at your dumps and see if I can get you BSOD free.


One

 NETGEAR NEUTRAL WIRELESS SOLUTION

Your Netgear Neutral Wireless Solution driver has been flagged. It is quite old a could probably do with updating. Check for updates here
Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {0, 2, 1, fffff800034c88ac}

*** WARNING: Unable to verify timestamp for scmndisp.sys
*** ERROR: Module load completed but symbols could not be loaded for scmndisp.sys
Probably caused by : scmndisp.sys ( scmndisp+16d1 )

Followup: MachineOwner
---------

1: kd> lmvm scmndisp
start end module name
fffff880`0188b000 fffff880`01895000 scmndisp T (no symbols)
Loaded symbol image file: scmndisp.sys
Image path: \SystemRoot\system32\DRIVERS\scmndisp.sys
Image name: scmndisp.sys
Timestamp: Fri May 27 11:30:22 2011 (4DDF7D3E)
CheckSum: 00009C0C
ImageSize: 0000A000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4


Two

 HARDWARE DIAGNOSTICS

A few of your dumps (0x50, 0x124) are pointing towards hardware errors. 0x124s are usually always hardware errors but rarely give us an indication of what the problem actually is. In this case we may have struck lucky as this particular one shows up ASUS AI Suite III. The utilities listed below are the ones I'm concerned about.Attachment 353971


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa800752d028, Address of the WHEA_ERROR_RECORD structure.
Arg3: 00000000bf800000, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000000000124, Low order 32-bits of the MCi_STATUS value.

Debugging Details:
------------------
BUGCHECK_STR: 0x124_GenuineIntel

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

PROCESS_NAME: AISuite3.exe

CURRENT_IRQL: f

ANALYSIS_VERSION: 6.3.9600.17029 (debuggers(dbg).140219-1702) amd64fre
We have seen motherboard packaged utilities cause 0x124s in the past and it could be the case here.
Uninstall ASUS AI Suite III and test the system for stability.
Run SeaTools to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use
Download and run MemTest86+ to test your RAM. RAM - Test with Memtest86+


   Note
Attachment 353972 Run MemTest86+ for at least 8 passes. Ideally set it off before you go to bed and leave it overnight, we're looking for zero errors here. A single error will show something's going bad with your RAM.


Three

 NVIDIA GPU

You've also received a 0x116 which is a VIDEO_TDR_ERROR (Timeout Detection & Recovery) which means your GPU driver has crashed and has failed to recover in time. This could be down to the driver, the card itself or possibly the power to the card.
Code:
******************************************************************************... Read more

http://www.sevenforums.com/bsod-help-support/365399-random-bsod-error-driver-ntoskrnl-exe-address-ntoskrnl-exe-74ec0.html
Relevancy 52.89%

BSOD random, probably under heavy load situations. I dont know how to do.


DM log collector file attached

many thanks

A:BSOD random most times ntoskrnl.exe+748c0 and ntoskrnl.exe+74ec0

Hi berdini.


Code:
DEFAULT_BUCKET_ID: GS_FALSE_POSITIVE_MISSING_GSFRAME
Scan the system for possible virus infection with the following programs.
Anti-rootkit utility TDSSKiller
Windows Defender Offline
Let us know the results.
____________________________________

Code:
BugCheck F7, {fffff8800a01ff08, f8800125d135, ffff077ffeda2eca, 0}

Probably caused by : Ntfs.sys ( Ntfs!_report_gsfailure+26 )

Followup: MachineOwner
---------

http://www.sevenforums.com/bsod-help-support/373211-bsod-random-most-times-ntoskrnl-exe-748c0-ntoskrnl-exe-74ec0.html
Relevancy 52.89%

i keep getting BSOD when playing game new graphics i dont know where to start when its comes to BSOD stuff

110414-10576-01.dmp 11/4/2014 10:48:39 PM 0x00000124 00000000`00000000 fffffa80`0af318f8 00000000`00000000 00000000`00000000 ntoskrnl.exe ntoskrnl.exe+4a63cc NT Kernel & System Microsoft? Windows? Operating System Microsoft Corporation 6.1.7600.16385 (win7_rtm.090713-1255) x64 ntoskrnl.exe+4a63cc C:\Windows\Minidump\110414-10576-01.dmp 6 15 7600 262,144 11/4/2014 10:48:41 PM is some info i dont know what else yall need

A:0x00000124 ntoskrnl.exe ntoskrnl.exe+4a63cc BSOD Error runninganygame

Please Help

http://www.sevenforums.com/bsod-help-support/351242-0x00000124-ntoskrnl-exe-ntoskrnl-exe-4a63cc-bsod-error-runninganygame.html
Relevancy 52.89%

Hi to make things easier for you dxgmms1.sys,ntoskrnl.exe,Ntfs.sys BSOD Address:ntoskrnl.exe+75bc0; below is the Bug Check String Driver and crash address SYSTEM SERVICE EXCEPTION dxgmms sys ntoskrnl exe bc MEMORY MANAGEMENT ntoskrnl exe ntoskrnl exe bc SYSTEM SERVICE EXCEPTION ntoskrnl exe ntoskrnl exe bc NTFS FILE SYSTEM Ntfs sys ntoskrnl exe bc IRQL NOT LESS OR EQUAL ntoskrnl exe ntoskrnl exe bc unrelated how could I make nice table above I have searched the forum Problem BSOD randomly usually graphics related eg flash games in chrome graphics related software Mathematica Problem I use an internet usb G device to connect to internet Every morning the device will not connect to internet and computer will hang on shutting down screen when I BSOD Address:ntoskrnl.exe+75bc0; dxgmms1.sys,ntoskrnl.exe,Ntfs.sys restart I have to manually turn off and back on again I think this may be a dying capacitor on motherboard that needs boot's to get excited Problem Chrome quot aw snap quot happens regularly and is usually flash content related even ad banners seem to cause it from time to time I have reinstalled chrome checked plugins etc etc no luck Internet explorer runs stable but for example in flash games it seems to momentarily freeze and then catch up BSOD Address:ntoskrnl.exe+75bc0; dxgmms1.sys,ntoskrnl.exe,Ntfs.sys with itself again These are moments where I think chrome would have crashed Things I've done SFC scan All's well Memtest I did pass it took an hour everything fine Will put it on over night tonight Checked for latest drivers Also have latest BIOS Checked win update Ran Intel Burn everything ok max stress over Gb RAM run min max temp thank you Noctua NH-C P this is with quiet adaptor too lol Ran malwarebytes found nothing toxic Ran SSDlife Free health SSD seems fine Bought a new motherboard assuming that the current one is going bad I haven't switched over to it yet and thought I should investigate a little further before I do ie bad RAM CPU Power Supply SSD CPU seems fine RAM passed test but will test further My own quot opinion quot until today was that there is a fault on motherboard probably with usb hardware Now I realise that it could be the power supply but I have no way to test this bar buy a new one My analysis bad motherboard or bad PSU Either way not getting away with cheap fix methinks UPDATE I enabled verifier exe using this Driver Verifier - Enable and Disable Windows crashes just before going to desktop I had to boot last known config to get up and running again IE I CAN RELIABLY CREATE BSOD USING VERIFIER EXE WITH GIVEN INSTRUCTIONS So I am going to try focusing on drivers loaded at startup by process of elimination Is there a quick way to find out which one Below is the Check String Driver and crash address for the BSOD's when using verifier exe IRQL NOT LESS OR EQUAL ntoskrnl exe ntoskrnl exe bc DRIVER IRQL NOT LESS OR EQUAL RNDISMPX SYS RNDISMPX SYS a UPDATE If I choose or more non Microsoft drivers in verifier exe I get BSOD different check strings but always at the same address Also computer seems more unstable since engaging with verifier exe I feel I have given a thorough evaluation based on information in this forum and would appreciate feedback from those with more expertise than I UPDATE Another Memtest gave errors on pass Questions any chance poor power supply can cause this anyone have experience increasing voltage to make this go away would bad RAM explain all my problems ok fine i'll go through RAM and the slots and find the bad one sigh major sigh positively tragic sigh UPDATE Started with slot with stick of RAM Did memtest but had an idea I turned on verifier exe with all rd party drivers selected and my theory was to replicate the BSOD I got earlier at startup Went through each slot each RAM combo's of RAM and then to add insult to injury with all sticks in exactly same as before no BSOD Life is tough So maybe RAM wasn't properly seated all this time or maybe I need to test the RAM proper... Read more

A:BSOD Address:ntoskrnl.exe+75bc0; dxgmms1.sys,ntoskrnl.exe,Ntfs.sys

**************UPDATE 5 ****************




The sequence of events went as follows.
RAM test 1 pass was passed. Verifier.exe caused immediate BSOD on windows start when activated. Trying to hunt down drivers revealed any combo of 3 or more drivers gave BSOD at startup. Randomly decided to recheck RAM. Failed memtest after 27 minutes pass 1. Found one RAM stick that passed after one pass slot0. Got fed up of waiting for other slot's. Devised a plan to use verifier to check the RAM by seeing which combo's of RAM sticks gave BSOD on startup. All combo's passed. And now verifier does not give BSOD on any setting. Began to hate life. Cheered myself up with prospect of sleep. Put all 16 Gb RAM in properly and ran mentest for 18 hours, 6 passes. No error. Still no verifier.exe errors when enabled. Wrote this update.


If RAM failed after 27min one test, and then after swapping around a retest of 18 hours has no error, one would presume the RAM may be ok. Equally, I believe one could say the RAM is suspect. So, if the test is failed it really doesn't tell us anything except there is a problem somewhere. But we know there is a problem since we have BSOD!!! If I hadn't rerun the test I wouldn't question the RAM.

So the question is: how do I categorically ensure that a stick of RAM is good? Is memtest on RAM with an alternative working computer enough?



In summary:

I ran memtest for 18 hours, which was 6 passes. No problems detected. Using verifier.exe with protocols given on this forum I no longer get BSOD.

Currently my hypothesis is that the RAM was never seated correctly, or given that it takes a bit of force to insert correctly into motherboard, the flexing has at least temporarily defused whatever fault was causing my BSOD. Tenuous I know. But I really have no other explanation other than something somewhere on the motherboard or power is failing, or even the RAM.

http://www.sevenforums.com/bsod-help-support/351171-bsod-address-ntoskrnl-exe-75bc0-dxgmms1-sys-ntoskrnl-exe-ntfs-sys.html
Relevancy 52.89%

Got my first blue screen of death tonight had firefox opened one watching youtube video another browsing internet After bsod /adress (ntoskrnl.exe+72a40) caused by driver (ntoskrnl.exe) BSOD it restarted i login but just black screen with cursor ctrl alt delete worked so i shut my computer down Boot up normally after check my minidump file bsod cause BSOD caused by driver (ntoskrnl.exe) /adress (ntoskrnl.exe+72a40) by ntoskrnl exe Did little search on google find BSOD caused by driver (ntoskrnl.exe) /adress (ntoskrnl.exe+72a40) has to do with ram and hard drive Downloaded wd data life guard diagnostic for my mechanic drive which is healthy but my ssd on shows failed end to end error rate value threshold worst is all in SMART statue Im not sure if i can trust this wd diagnostic on my crucial ssd there are alot of unknown in SMART statue too Theres no ssd diagnotic for crucial there is a firmware not sure if it helps So i downloaded and ran crystaldiskinfo on my ssd health statues says good it doesnt say end to end error rate like wd Instead same ID B line says quot unused reserve nand blocks quot instead Is my ssd good i havent ran a test on my ram yet This is almost month old build Asrock x x killer i k gtx w crucial x gb crucial gb ssd wd blue tb Heres info of bsod with bluescreenview Bug Check String- IRQL GT ZERO AT SYSTEM SERVICE Bug Check Code - x a Parameter - dc a Parameter - Parameter - Parameter - fffff b Caused By Driver- ntoskrnl exe Caused By Address- ntoskrnl exe a File Description- NT Kernel amp System

A:BSOD caused by driver (ntoskrnl.exe) /adress (ntoskrnl.exe+72a40)

Blue Screen of Death (BSOD) Posting Instructions

http://www.sevenforums.com/bsod-help-support/367819-bsod-caused-driver-ntoskrnl-exe-adress-ntoskrnl-exe-72a40.html
Relevancy 52.89%

Jan , Crash Address All !! BSOD ntoskrnl.exe+80640 the Time ntoskrnl.exe ------------------------------------------- How to Solve - I've uninstalled my windows and recover my laptop with recovery DVD to it's original factory state original windows - Never installed Norton internet security again I'm using Microsoft Security Essentials now - Updated my Graphic Card Driver Intel Wifi Driver Sound Card Driver And some other drivers It's been two months now with no BSOD Thanks to dear Arc and gregrocker Thank you guys ------------------------------------------- Oct ------------------------------------------- Hi guys It's almost a year that I have problems with BSOD ntoskrnl.exe , All the Time !! Crash Address ntoskrnl.exe+80640 BSODs it use to be Atikmdag BSOD but I solve that with updating my Graphic card Driver and Changing Atikmdag sys file in Windows System folder But now it's about months that I get ntoskrnl exe BSODs in lot's of situations Web surfing Windows log on Working with Unity Working with files and Really lot's of Times Even in Safe Mode with Networking I guess it's because of my Network driver because I got BSOD in Safe Mode with Network but I never got a BSOD in normal Safe mode BTW I dunno how to solve it Please Help me these BSODs are sooooooooo annoying Here is my System Specs It's Msi GX CPU Intel R Core TM i CPU M GHz Main MICRO-STAR INTERNATIONAL CO LTD MS- Bios BIOS Date Ver Memory GB HDD ST AS ATA Device Sound Card AMD High Definition Audio Device High Definition Audio Device Graphic ATI Mobility Radeon HD Series - GB GDDR OS Microsoft Windows Ultimate -bit Multiprocessor Free Service Pack it's weird that I've finished writing this without a BSOD Here is the Zip file Created with SF Diagnostic Tool

A:BSOD ntoskrnl.exe , All the Time !! Crash Address ntoskrnl.exe+80640

Code:
fffff800`00b9cc48 fffff880`010b75fcUnable to load image \SystemRoot\System32\Drivers\sptd.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for sptd.sys
*** ERROR: Module load completed but symbols could not be loaded for sptd.sys
sptd+0x4b5fc
Daemon Tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known BSOD causer. Uninstall Alcohol 120% at first. Then download SPTD standalone installer from Disk-Tools.com, and execute the downloaded file as guided below :
Double click to open it.
Click this button only:

If it is grayed out, as in the picture, there is no more SPTD in your system, and you just close the window.
Next uninstall Virtual CloneDrive, as vclone.sys is as fatal as SPTD.sys, too.
After doing these two, report the situation back.

http://www.sevenforums.com/bsod-help-support/309093-bsod-ntoskrnl-exe-all-time-crash-address-ntoskrnl-exe-80640-a.html
Relevancy 52.89%

I'm getting random Blue Screens and can't figure out why. I'm not running any hardcore programs. I'm mostly just using Microsoft Office and Firefox. The BSOD's seem to happen when I'm in Outlook, Excel or Firefox. Haven't been able to determine exactly which at the time as I'm moving back and forth between them quite often.

I've tried the SFC command and it didn't find anything. I used BlueScreenViewer but not a lot of help. All drivers for sound and video have been updated. I've also updated the firmware to the Crucial M4 SSD version 040H.

Any insight would be great.

Specs:
Laptop - HP EliteBook 8560w
CPU - Intel i7-2670QM
RAM - Hynix/Hyundai 8.0 GB Ram
SSD - M4-CT256M4 SSD
Audio - AMD High Definition Audio
Video - AMD FirePro M5950
OS - Windows 7 Pro 64-bit

A:Random BSOD Reporting ntoskrnl.exe+75c40 & ntoskrnl.exe+7efc0

Update the firmware of your Crucial M4-CT256M4SSD2.

And, Uninstall McAfee Using McAfee Removal Tool. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.
Download, install and update those, and then run full system scans with both of them, one by one.

Free up the startup.
Click on the Start button
Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the “Startup” tab.
Deselect all items other than the antivirus and touchpad driver SynTPEnh.
Apply > OK
Accept then restart.
Let us know the results.

http://www.sevenforums.com/bsod-help-support/281927-random-bsod-reporting-ntoskrnl-exe-75c40-ntoskrnl-exe-7efc0.html
Relevancy 52.89%

Hello I've been facing constant problems with BSOD Ntoskrnl exe today It happened for the first time about a month ago when I tried to update Opera - gt but after many many restarts trying to run Windows in a quot Safe Mode quot restoring recovery points finally Windows started to work I haven't tried to update Opera since then Today I don't know what happened because I went away of a computer yes guys it's possible for a few minutes and when I came back I saw BSOD with 'DRIVER IRQL NOT LESS OR EQUAL' error I tried to find a solution on the Internet Ntoskrnl.exe constant (BTW, passed) - restarts Memtest but I Ntoskrnl.exe - constant restarts (BTW, Memtest passed) still don't know what else to do When I run system in a Safe Mode with a th option Safe mode with networking everything works but when I try to run Windows normally - same situation as previously reboot I added dump file as an attachment - - txt Please change the extension txt - gt dmp I wasn't able to upload dmp file to this forum The second file debuglog txt was created in a following way Type the following kd z C Windows memory dmp or the path to your dmp file Type the following logopen c debuglog txt Type the following sympath srv c symbols http msdl microsoft com download symbols Type the following reload analyze -v r kv lmnt logclose q I found above-mentioned steps on Reading a memory dmp or other dmp file - Scott Forsyth's Blog The last but not least About a month ago when I had the same problems I run Memtest for a whole night and it found no problems I haven't tested other hardware yet Please help me with this issue Thanks in advance

A:Ntoskrnl.exe - constant restarts (BTW, Memtest passed)

Hi

Please update your thread by following instructions from Blue Screen of Death (BSOD) Posting Instructions

http://www.eightforums.com/bsod-crashes-debugging/35437-ntoskrnl-exe-constant-restarts-btw-memtest-passed.html
Relevancy 52.89%

I've been getting BSODS ntfs.sys) installed, RAM New constant (ntoskrnl, BSODS whenever I play some kind of PC game FIFA mostly I installed new RAM to get rid of my old GB stick that was also giving me New RAM installed, constant BSODS (ntoskrnl, ntfs.sys) BSODS as well Here's some info full minidumps and information included in the attached zip As a side note the reason my Nvidia graphics driver is kinda old is because everytime I update to a recent driver I'll launch a game and then the entire screen goes blank grey and I get a notification saying quot The Display Driver has stopped responding and has recovered quot When I use an older driver I dont get this error at all I've New RAM installed, constant BSODS (ntoskrnl, ntfs.sys) also ran Memtest and Windows Memory Diagnostic on the new memory model KVR D N G Nothing showed up despite running both tests twice ------------------ System Information ------------------ Time of this report Machine name KIKO Operating System Windows Professional -bit Build Service Pack win sp gdr - Language English Regional Setting English System Manufacturer BIOSTAR Group System Model A G BIOS Default System BIOS Processor AMD Phenom tm II X Processor CPUs GHz Memory MB RAM Available OS Memory MB RAM Page File MB used MB available Windows Dir C Windows DirectX Version DirectX DX Setup Parameters Not found User DPI Setting Using System DPI System DPI Setting DPI percent DWM DPI Scaling Disabled DxDiag Version bit Unicode Thank you for your time

http://www.sevenforums.com/bsod-help-support/384226-new-ram-installed-constant-bsods-ntoskrnl-ntfs-sys.html
Relevancy 52.89%

Hello all!

I've been having a VERY annoying issue as of late. I usually keep my computer in standby when I go to bed on weekdays. However, multiple times a week, I turn my laptop on to find out that it shut down. When I log in, I get the "windows has recovered from an unexpected shutdown" message. Upon pulling up blue screen view, I see the bug check string as "IRQL_NOT_LESS_OR_EQUAL" caused by the driver "ntoskrnl.exe". I've ran memtest twice for 7 passes and it turned up no errors so I am at a loss here . See the attached screen shot of Bluescreen View. Help would be appreciated! My only guess is some obscure driver issue. I have also attached the DMP files as a .zip.

A:Constant Blue Screens,ntoskrnl.exe IRQL_NOT_LESS_OR_EQUAL

  
Quote: Originally Posted by Narukami


Hello all!

I've been having a VERY annoying issue as of late. I usually keep my computer in standby when I go to bed on weekdays. However, multiple times a week, I turn my laptop on to find out that it shut down. When I log in, I get the "windows has recovered from an unexpected shutdown" message. Upon pulling up blue screen view, I see the bug check string as "IRQL_NOT_LESS_OR_EQUAL" caused by the driver "ntoskrnl.exe". I've ran memtest twice for 7 passes and it turned up no errors so I am at a loss here . See the attached screen shot of Bluescreen View. Help would be appreciated! My only guess is some obscure driver issue. I have also attached the DMP files as a .zip.




Bug check string as "IRQL_NOT_LESS_OR_EQUAL" caused by the driver "ntoskrnl.exe" has often been associated with memory issues in my experience. You can test for bad chips by removing all but one of them, assuming your 8 Gigs consists of more than one chip, and testing the results.

Of course, this is just my $.02. As with most everything in life, others may have a different story.

http://www.sevenforums.com/bsod-help-support/354962-constant-blue-screens-ntoskrnl-exe-irql_not_less_or_equal.html
Relevancy 52.89%

I've been getting several constant BSODS as of late in the middle of doing work. Every I get the crash it says "MEMORY_MANAGEMENT". I have already ran Memtest on my system about 10 times and nothing came up at all. I looked up on BlueScreenView and it says that ntoskrnl.exe+75bc0.exe is at fault. Any ideas as to what to do to remedy this?

A:Constant BSODS (ntoskrnl.exe+75bc0) at fault

  
Quote: Originally Posted by sixty01


I've been getting several constant BSODS as of late in the middle of doing work. Every I get the crash it says "MEMORY_MANAGEMENT". I have already ran Memtest on my system about 10 times and nothing came up at all. I looked up on BlueScreenView and it says that ntoskrnl.exe+75bc0.exe is at fault. Any ideas as to what to do to remedy this?


Before we start, can you tell us which program you ran to test the memory and for how long?
A link of the program would be a nice explanation.

And, 10 times ... what does it exactly mean? You tested the memory for ten different instances?

Please let us know. This information would be very vital.

http://www.sevenforums.com/bsod-help-support/370947-constant-bsods-ntoskrnl-exe-75bc0-fault.html
Relevancy 52.46%

Hi Everyone Hoping I can get some insight from you all on this issue Partlist Intel Core i - K EVGA GeForce GTX Corsair Air - System Build - PCPartPicker I have a fresh install of Windows "IRQL_NOT_LESS_OR_EQUAL" "ntoskrnl.exe" / Win 10 & Skylake New Pro on Build BSOD Pro on brand new hardware literally assembled yesterday I keep getting either a BSOD Diablo III gives me a BSOD so does staying remote desktop-ed into my local server or Chrome browser crashes Every single BSOD is the same error stated in the title quot IRQL NOT LESS OR EQUAL quot quot ntoskrnl exe quot As I was typing this post I got one BSOD for quot Memory BSOD on New Skylake Win 10 Pro Build & "IRQL_NOT_LESS_OR_EQUAL" / "ntoskrnl.exe" Management quot - guessing a memory leak or something I have already compiled completed both attached and linked PERFMON which seems to be abysmal considering my hardware https dl dropboxusercontent com u N Report BSOD on New Skylake Win 10 Pro Build & "IRQL_NOT_LESS_OR_EQUAL" / "ntoskrnl.exe" rar Sysnative https dl dropboxusercontent BSOD on New Skylake Win 10 Pro Build & "IRQL_NOT_LESS_OR_EQUAL" / "ntoskrnl.exe" com u lectionApp zip MemTest errors both on stock and OC ram - Mobo wants to recognize my ddr as so I tested both at and with XMP enabled at with adjusted voltage etc Still after hours zero mem issues https dl dropboxusercontent com u MemTest log BlueScreenView Logs https dl dropboxusercontent com u report html Anything else you think you might need as I grab data Thoughts So Far Right now I think I have eliminated the bad memory possibility with the memtest results but not sure that's hours running and zero errors gives me some confidence there I also double checked my Mobo user guide for the Memory compatibility I don't think it's a Mobo issue My last guess is a software driver issue I updated all my drivers from the Asus Maximus VIII Gene site for chipset etc When I check Device Manager nothing shows a missing or outdated driver I used NVIDIA Geforce Experience to update my GPU drivers Everything appears to be current Thanks for looking into this everyone I greatly appreciate any insight here

A:BSOD on New Skylake Win 10 Pro Build & "IRQL_NOT_LESS_OR_EQUAL" / "ntoskrnl.exe"

* [Driver Verifier Results](https://dl.dropboxusercontent.com/u/...20verifier.txt)

http://www.techsupportforum.com/forums/f299/bsod-on-new-skylake-win-10-pro-build-and-irql_not_less_or_equal-ntoskrnl-exe-1042929.html
Relevancy 52.46%

When I put my pc in sleep mode it often crashes: the screen goes normally in sleep mode, but the pc continues to stay awake for several minutes than BSOD & restart or BSOD & shut off.
Thanks to BlueScreenView I found what is seemingly the guilty process, but I don't know what to do now.
Attachment 315989
Thanks
Also, sorry for my bad english.

A:BSOD when goes sleep, ntoskrnl.exe+e96d2/ntoskrnl.exe+81e7a

Your HUAWEI Mobile Connect driver is causing issues here.


Code:
*** WARNING: Unable to verify timestamp for ew_jubusenum.sys
*** ERROR: Module load completed but symbols could not be loaded for ew_jubusenum.sys
Probably caused by : ew_jubusenum.sys
If it's a necessary driver then update it but if not then please completely remove it.
I'm not that familiar with such devices but it should be under Network Adapters, right click on the device and click properties, then click on the driver tab and update.


Code:
fffff880`015e0000 fffff880`015fc000 ew_jubusenum T (no symbols)
Loaded symbol image file: ew_jubusenum.sys
Image path: \SystemRoot\system32\DRIVERS\ew_jubusenum.sys
Image name: ew_jubusenum.sys
Timestamp: Mon Aug 20 01:55:56 2012 (50318B1C)
CheckSum: 0001CF99
ImageSize: 0001C000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

http://www.sevenforums.com/bsod-help-support/330151-bsod-when-goes-sleep-ntoskrnl-exe-e96d2-ntoskrnl-exe-81e7a.html
Relevancy 52.46%

I run windows 7 64-bit that was bought retail and put on by a friend who built my pc.
hardware approximately 4 years old
reformatted one of my HD's but never reinstalled the OS

intel(r) core(tm) i7-2600k @ 3.40 GHz
Nvidia geforce gtx 660ti
P8Z69-V GEN3 motherboard
lsp ultra 750 watt power supply

Was a custom build. Ever since I updated to the most recent graphics driver i have been experiencing BSOD crashes. I rolled back and it still happens and other forum suggested it was a motion joy driver but I removed it and I have still BSOD a record 7 times today and I don't know what else I can do.
I have run memtest in every mobo slot and each stick of ram and they are all good. Any suggestions/help would be greatly appreciated.

A:Constant ntoskrnl.exe crashes while gaming/watching videos

Don't see a edit button Dx but the driver that some other people say is causing the problem is MijXfilt.sys
I have deleted all its locations except a few that I find in regedit.exe when I search for it and it won't let me delete those ones. If that driver is indeed the problem I have no idea short of a reformat that would get rid of it.

Any ideas are greatly appreciated.

http://www.techsupportforum.com/forums/f299/constant-ntoskrnl-exe-crashes-while-gaming-watching-videos-967721.html
Relevancy 52.03%

Hello!
Lately for 2 days my computer has been having the BSOD saying "ntoskrnl.exe"
It happens completely randomly.
It can be me watching a youtube video, or it can be me playing Garrysmod (On lowest settings)
I did a chkdsk /f (and then it asked me to run it when the system restores so I did and it detected no bad files)
I did a system restore before my computer has been making these errors and so far as of 20 minutes, it's still bad. It's slower, it "lags" (I was listening to music via itunes and then it started skipping for a mid-second) and some files are corrupted (such as Chrome)
And seeing how I did a system restore, the .dmp files are now gone so I cannot upload,
What are the possibilities of what's causing this?

A:bsod ntoskrnl.exe windows 7 64 bit

  
Quote: Originally Posted by LaVie


Hello!
Lately for 2 days my computer has been having the BSOD saying "ntoskrnl.exe"
It happens completely randomly.
It can be me watching a youtube video, or it can be me playing Garrysmod (On lowest settings)
I did a chkdsk /f (and then it asked me to run it when the system restores so I did and it detected no bad files)
I did a system restore before my computer has been making these errors and so far as of 20 minutes, it's still bad. It's slower, it "lags" (I was listening to music via itunes and then it started skipping for a mid-second) and some files are corrupted (such as Chrome)
And seeing how I did a system restore, the .dmp files are now gone so I cannot upload,
What are the possibilities of what's causing this?


Post it following the Blue Screen of Death (BSOD) Posting Instructions after one more BSOD.

http://www.sevenforums.com/bsod-help-support/294602-bsod-ntoskrnl-exe-windows-7-64-bit.html
Relevancy 52.03%

Hi I m brand new to the community but I have been reading the forum in attempt to repair my bsod My bsod are related to ntoskrnl exe I don t know what s causing it it has happened while it was on sleep mode It happened while I was playing the game League of Legends It happened while I was just browsing on the ntoskrnl.exe 8 BSOD windows internet I hope I can fix this Thanks guys Here are the specs of my laptop OS Version Microsoft Windows Pro bit Processor AMD A - M APU with Radeon tm HD Graphics BSOD windows 8 ntoskrnl.exe AMD Family Model Stepping Processor Count RAM Mb Graphics BSOD windows 8 ntoskrnl.exe Card AMD Radeon HD G Mb Hard Drives C Total - MB Free - MB Motherboard AMD Pumori Antivirus Windows Defender Disabled And here is dump file from BluescreenView Dump File - - dmp Crash Time - - AM Bug Check String APC INDEX MISMATCH Bug Check Code x Parameter fa c b Parameter Parameter fffe Parameter fffff b db Caused By Driver Null SYS Caused By Address Null SYS fbfb File Description Product Name Company File Version Processor x Crash Address ntoskrnl exe ad Stack Address Stack Address Stack Address Computer Name Full Path C WINDOWS Minidump - - dmp Processors Count Major Version Minor Version Dump File Size nbsp

Relevancy 52.03%

Ey mates,
 
I've been having trouble with this machine since I built it in 2014, but I never really minded them. After fixing a lot of errors through its lifetime, I'm simply lost with the current one. The machine crashes randomly, also showing a random error name but it's always the same file: ntoskrnl.exe
 
So, after unsucessefully trying other forums for a fix, I now come to this one, hopeful to find the bloody answer. I've tried a lot of stuff, most of which I can't recall, but I'm willing to try them again if needed.
 
Minidump files

http://www.bleepingcomputer.com/forums/t/629379/ntoskrnlexe-bsod-windows-10/
Relevancy 52.03%

Hey everyone Need help with an issue I've been having since I got my new rig from 10 - ntoskrnl.exe BSOD's Windows CyberPowerPC Since I got it a couple months ago it's been getting BSOD errors at weird times mostly while playing either World of Warcraft ntoskrnl.exe BSOD's - Windows 10 or Overwatch Using WhoCrashed it's pointing me in the direction of the ntoskrnl exe every time I'm wondering if it's memory issues or what the case is One thing I do realize is that the BIOS is from but I do not feel safe updating it as again I'm not an expert Now I am no expert with computers so I am not sure where to take and look to try and solve this annoying problem Any help would be appreciated System info is below and for some reason this forum will not upload the dmp files so I'll grab what info I can from WhoCrashed OS Name Microsoft Windows Home Version Build Other OS Description Not Available OS Manufacturer Microsoft Corporation System Name DESKTOP-IMQHR N System Manufacturer Gigabyte Technology Co Ltd System Model GA- LMT-S System Type x -based PC Processor AMD FX - Quad-Core Processor Mhz Core s Logical Processor s BIOS Version Date Award Software International Inc F - - SMBIOS Version Embedded Controller Version BIOS Mode Legacy BaseBoard Manufacturer Gigabyte Technology Co Ltd BaseBoard Model Not Available BaseBoard Name Base Board Platform Role Desktop Secure Boot State Unsupported PCR Configuration Binding Not Possible Windows Directory C WINDOWS System Directory C WINDOWS system Boot Device Device HarddiskVolume Locale Canada Hardware Abstraction Layer Version Time Zone Atlantic Daylight Time Installed Physical Memory RAM GB Total Physical Memory GB Available Physical Memory GB Total Virtual Memory GB Available Virtual Memory GB Page File Space GB Page File C pagefile sys Hyper-V - VM Monitor Mode Extensions Yes Hyper-V - Second Level Address Translation Extensions Yes Hyper-V - Virtualization Enabled in Firmware No Hyper-V - Data Execution Protection Yes On Mon - - AM GMT your computer crashed crash dump file C WINDOWS Minidump - - dmp This was probably caused by the following module ntoskrnl exe nt x A B Bugcheck code x E xFFFFFFFFC xFFFFF C A F x x Error KMODE EXCEPTION NOT HANDLED file path C WINDOWS system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System Bug check description This indicates that a kernel-mode program generated an exception which the error handler did not catch This appears to be a typical software driver bug and is not likely to be caused by a hardware problem The crash took place in the Windows kernel Possibly this problem is caused by another driver that cannot be identified at this time On Mon - - AM GMT your computer crashed crash dump file C WINDOWS memory dmp This was probably caused by the following module ntkrnlmp exe nt KeBugCheckEx x Bugcheck code x E xFFFFFFFFC xFFFFF C A F x x Error KMODE EXCEPTION NOT HANDLED Bug check description This indicates that a kernel-mode program generated an exception which the error handler did not catch This appears to be a typical software driver bug and is not likely to be caused by a hardware problem The crash took place in the Windows kernel Possibly this problem is caused by another driver that cannot be identified at this time On Sat - - AM GMT your computer crashed crash dump file C WINDOWS Minidump - - dmp This was probably caused by the following module ntoskrnl exe nt x A B Bugcheck code xA x F xFF x xFFFFF D Error IRQL NOT LESS OR EQUAL file path C WINDOWS system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System Bug check description This indicates that Microsoft Windows or a kernel-mode driver accessed paged memory at DISPATCH LEVEL or above This appears to be a typical software driver bug and is not likely to be caused by a hardware problem The crash took place in the Windows kernel Possibly this problem is... Read more

http://www.bleepingcomputer.com/forums/t/629055/ntoskrnlexe-bsods-windows-10/
Relevancy 52.03%

OS Name Microsoft Windows 7 Ultimate
Version 6.1.7601 Service Pack 1 Build 7601
OS Manufacturer Microsoft Corporation
System Type x64-based PC
Processor AMD Phenom(tm) 9600 Quad-Core Processor, 2300 Mhz
BIOS Version/Date American Megatrends Inc. 2701, 10/8/2010
SMBIOS Version 2.5
Windows Directory C:\Windows
System Directory C:\Windows\system32
Boot Device \Device\HarddiskVolume1
Hardware Abstraction Layer Version = "6.1.7601.17514"
Installed Physical Memory (RAM) 8.00 GB
Total Physical Memory 8.00 GB
Available Physical Memory 3.34 GB
Total Virtual Memory 16.0 GB
Available Virtual Memory 11.2 GB
Page File Space 8.00 GB
Page File C:\pagefile.sys

I've been having random BSOD which don't seem to be triggered by any particular action on my behalf. I have tested all hardware and memory and it all checks out O.K.

Thank you in advance for your troubleshooting help with this matter. I'm up against a wall with this one and could use some help.

A:BSOD Windows 7 x64 --> ntoskrnl.exe

No DMPs included in upload

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

If you are overclocking STOP

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.



To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

http://www.sevenforums.com/bsod-help-support/218544-bsod-windows-7-x64-ntoskrnl-exe.html
Relevancy 52.03%

I can't reproduce this BSOD but it happens when I am working with/closing a capture card program called AmarecTV: AmaRecTV

99% of the time it is fine using this program. I have never got a BSOD any other way (i.e. normal operation).

Specs:

i5 2500k
Gigabyte P67A-UD4
8 GB RAM
ATI 6850

I have attached the 3 BSOD dumps.

A:ntoskrnl.exe BSOD on Windows 7

Hi,

Three dumps attached, all of the PROCESS_HAS_LOCKED_PAGES (76) bugcheck. This is a device driver bug, it means that a driver is not cleaning up correctly after an I/O. Unfortunately, the 4th argument is 0 and not 1 therefore we cannot find out the guilty driver.

You can go the registry key method to make it so next time you crash, rather than a PROCESS_HAS_LOCKED_PAGES (76) bugcheck, it will be a DRIVER_LEFT_LOCKED_PAGES_IN_PROCESS (0xCB) bugcheck. For now though, I am just going to recommend taking the safer route and enable Driver Verifier:

Driver Verifier:

Quote:




What is Driver Verifier?
Driver Verifier is included in Windows 7, Windows Server 2008 R2, Windows Vista, Windows Server 2008, Windows 2000, Windows XP, and Windows Server 2003 to promote stability and reliability; you can use this tool to troubleshoot driver issues. Windows kernel-mode components can cause system corruption or system failures as a result of an improperly written driver, such as an earlier version of a Windows Driver Model (WDM) driver.
Essentially, if there's a 3rd party driver believed to be at issue, enabling Driver Verifier will help flush out the rogue driver by flagging it and causing your system to BSOD.
Before enabling Driver Verifier, it is recommended to create a System Restore Point:
Vista - START | type rstrui - create a restore point
Windows 7 - START | type create | select "Create a Restore Point"
How to enable Driver Verifier:
Start > type "verifier" without the quotes > Select the following options -
1. Select - "Create custom settings (for code developers)"
2. Select - "Select individual settings from a full list"
3. Check the following boxes -
- Special Pool
- Pool Tracking
- Force IRQL Checking
- Deadlock Detection
- Security Checks (Windows 7)
- Concurrentcy Stress Test (Windows 8)
- DDI compliance checking (Windows 8)
- Miscellaneous Checks
4. Select - "Select driver names from a list"
5. Click on the "Provider" tab. This will sort all of the drivers by the provider.
6. Check EVERY box that is NOT provided by Microsoft / Microsoft Corporation.
7. Click on Finish.
8. Restart.
Important information regarding Driver Verifier:
- If Driver Verifier finds a violation, the system will BSOD.
- After enabling Driver Verifier and restarting the system, depending on the culprit, if for example the driver is on start-up, you may not be able to get back into normal Windows because Driver Verifier will flag it, and as stated above, that will cause / force a BSOD.
If this happens, do not panic, do the following:
- Boot into Safe Mode by repeatedly tapping the F8 key during boot-up.
- Once in Safe Mode - Start > type "system restore" without the quotes.
- Choose the restore point you created earlier.
If you did not set up a restore point, do not worry, you can still disable Driver Verifier to get back into normal Windows:
- Start > Search > type "cmd" without the quotes.
- To turn off Driver Verifier, type in cmd "verifier /reset" without the quotes.
- Restart and boot into normal Windows.
How long should I keep Driver Verifier enabled for?
It varies, many experts and analysts have different recommendations. Personally, I recommend keeping it enabled for at least 36-48 hours. If you don't BSOD by then, disable Driver Verifier.
My system BSOD'd, where can I find the crash dumps?
They will be located in C:\Windows\Minidump
Any other questions can most likely be answered by this article:
http://support.microsoft.com/kb/244617





Regards,

Patrick

http://www.techsupportforum.com/forums/f299/ntoskrnl-exe-bsod-on-windows-7-a-701586.html
Relevancy 52.03%

I have had multiple BSODs for the past few days and the common filename between them all has been ntoskrnl.exe, they had some other drivers which i fixed but ntoskrnl.exe still causes a bsod.

I have attached a rar file to the post containing 4 dumps, I will appreciate any help to resolve this issue

Thanks

EDIT:
Forgot to mention, I have an OC'd 4.2ghz i7 3770k, I have ruled this out being an issue as I ran prime95 overnight without an issues. The BSOD tends to only happen when running games

A:Windows 7 BSOD ntoskrnl.exe

It is a Windows core OS file that is quite important but it can mean lots of things:
No boot Windows 7. Error: ntoskrnl.exe is missing or corrupt - Microsoft Community

http://www.techsupportforum.com/forums/f299/windows-7-bsod-ntoskrnl-exe-1120049.html
Relevancy 52.03%

Hello Everyone

I bought a HP 15-ab034tx Laptop two months ago, and I have been having BSOD's since. I thought they were just because of Drivers. And thus I updated all of them. Most of the BSOD's were fixed, but not all of them. I upgraded it to Windows 10 (Clean Install) from the pre-installed Windows 8.1 Single Language. The amount of BSOD's reduced, and downgrading nVidia Graphics Card driver, also helped in reducing.
All I was left with was 1-2 BSOD's per day, which mostly were WIN8_DRIVER_FAULT.

I talked to HP Support and they sent me a Recovery Disc, as they believed it is an OS error.
I used their Disc and it installed Windows 8.1 Single Language, and on the first day it ran smoothly. Today is the second day, and I have had 4-5 BSOD's.

So, I need your help in identifying the source.
Here is the File Generated by dm_log_generator
HACK-E-STA_HP-Fri_02_12_2016_143915_65.zip

http://www.eightforums.com/bsod-crashes-debugging/73953-windows-8-1-bsods-ntoskrnl-exe-hal-dll.html
Relevancy 52.03%

So random bsod. updated drivers with iobit driver updater. Kept on happening. Used bluescreen view. Said ntoskrnl.exe was the cause. Ran sfc scan now. everything wasnt fixed. Told me to look at the stuff in the cbs log. Log should be attached. I dont know what else to do. Or if ntoskrnl.exe is fixed. But thats supposed to be whats causing the crashes.
 

A:windows 8.1 bsod ntoskrnl.exe

To make sure of having a good base to start with I'd install all the latest drivers (beginning with the chipset) from the PC manufacturer's web site.
 

https://forums.techguy.org/threads/windows-8-1-bsod-ntoskrnl-exe.1128254/
Relevancy 52.03%

I recently installed Windows 8 RTM and am having tons of BSOD's. The machine is still mostly usable, though, as the errors seem to be occurring randomly. Generally, it boots fine, and plays games/other strenuous things fine. Usually the BSOD's occur when idle or when browsing in Chrome. Before I installed Windows 8, I had no problems. I installed Windows 8 to a new SSD, and this is the only hardware that's been changed. I have attached the zip file as instructed with the dump files, etc. Every BSOD lists ntoskrnl, making me think this could just be a stability problem with Win8. However, it could also be a driver issue, a problem with my SSD, or something else that I'm just not thinking of. Hopefully someone wiser than I will be able to help :P

Edit: Also, everything is at stock clocks and voltages.

A:Windows 8 BSOD - Ntoskrnl.exe?

Does anyone have any suggestions?

http://www.eightforums.com/bsod-crashes-debugging/9240-windows-8-bsod-ntoskrnl-exe.html
Relevancy 52.03%

Hello experts i really need your help my laptop keeps crashing everytime i play my online game called battlefield heroes and yesterday it crashed while i was recording my training session using Camtasia Now this happens a lot NTOSKRNL.EXE 7 with Windows BSOD I tried to read the bluescreenview utility to view the dump but i guess im not that technical Experts i REALLY REALLY NEED YOUR HELP I have attached the dump files and here is my system information please let me know if you need anything else from God bless you all for looking for helping in advance All help is monumentally appreciated OS Name Microsoft Windows Home Premium Version Service Pack Build Other OS Description Not Available OS Manufacturer Microsoft Corporation System Name KING-PC System Manufacturer Hewlett-Packard System Model HP Pavilion dv Notebook PC System Type x -based PC Processor AMD Turion tm II Dual-Core Mobile M Mhz Core s Logical Processor s BIOS Version Date Insyde F SMBIOS Version Windows Directory C Windows System Directory C Windows system Boot Device Device HarddiskVolume Locale United States Hardware Abstraction Layer Version quot quot User Name KING-PC KING Time Zone Central Daylight Time Installed Physical Memory RAM GB Total Physical Memory GB Available Physical Memory GB Total Virtual Memory GB Available Virtual Memory GB Page File Space GB Windows 7 BSOD with NTOSKRNL.EXE Page File Windows 7 BSOD with NTOSKRNL.EXE C pagefile sys

A:Windows 7 BSOD with NTOSKRNL.EXE

Hi -

ntoskrnl.exe = the Windows NT Kernel

Run Driver Verifier - Driver Verifier - Windows 7 & Vista (BSOD-related)

Driver Verifier needs to run 24 hours minimum or until it BSODs your system, whichever is less. Then . . .

Provide full system info - Blue Screen of Death (BSOD) Posting Instructions - Windows 7 & Vista

Also, run Speccy - Speccy - System Information - Free Download
- "File" | "Publish Snapshot" | Paste URL into your next post

Regards. . .

jcgriff2

`

http://www.techsupportforum.com/forums/f299/windows-7-bsod-with-ntoskrnl-exe-591584.html
Relevancy 52.03%

Hello,

my machine is bluescreening about every 15 - 20 minutes. I am pretty certain its a driver issue as I have been running in safe mode for a couple of days now but I have no idea how to interpret the crashdumps. Whocrash keeps mentioning ntoskrnl.exe.

Anyway I have posted the PCHF tool zip file and the WhoCrash report for good measure. Any help would be greatly appreciated.

edit: since creating these reports I have re-installed windows 8 out of desperation and the problems have just gotten worse. The PC is crashing every 5 minutes now!

A:Windows 8 ntoskrnl.exe BSoD

Code:
******************************************************************************** *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 1A, {41287, 0, 0, 0}
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+33081 )
Followup: MachineOwner
---------
4: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
MEMORY_MANAGEMENT (1a)
# Any other values for parameter 1 must be individually examined.
Arguments:
Arg1: 0000000000041287, An illegal page fault occurred while holding working set synchronization.
Parameter 2 contains the referenced virtual address.
Arg2: 0000000000000000
Arg3: 0000000000000000
Arg4: 0000000000000000
Debugging Details:
------------------


BUGCHECK_STR: 0x1a_41287
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: regsvr32.exe
CURRENT_IRQL: 0
TRAP_FRAME: fffff88002f55810 -- (.trap 0xfffff88002f55810)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=fffffa8014fe2c98 rbx=0000000000000000 rcx=0000000000000360
rdx=fffffa80142b1240 rsi=0000000000000000 rdi=0000000000000000
rip=fffff801f0dbec4f rsp=fffff88002f559a0 rbp=000001cdb63175d0
r8=0000000000000000 r9=fffffa80142b1240 r10=0000000000000000
r11=0000000000000011 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei ng nz na pe nc
nt!MiEmptyPageAccessLog+0x237:
fffff801`f0dbec4f 4c8b2b mov r13,qword ptr [rbx] ds:00000000`00000000=????????????????
Resetting default scope
LAST_CONTROL_TRANSFER: from fffff801f0e738a5 to fffff801f0d04740
STACK_TEXT:
fffff880`02f556c8 fffff801`f0e738a5 : 00000000`0000001a 00000000`00041287 00000000`00000000 00000000`00000000 : nt!KeBugCheckEx
fffff880`02f556d0 fffff801`f0d021ee : 00000000`00000000 00000000`00000000 fffff801`f0f54000 fffff880`02f55810 : nt! ?? ::FNODOBFM::`string'+0x33081
fffff880`02f55810 fffff801`f0dbec4f : fffffa80`0cd82740 fffff801`f0d393c2 fffffa80`142b1240 00000000`00000000 : nt!KiPageFault+0x16e
fffff880`02f559a0 fffff801`f0d39b57 : fffffa80`14fe2000 00000000`00000001 00000003`00000000 00000000`00332dbd : nt!MiEmptyPageAccessLog+0x237
fffff880`02f55a30 fffff801`f0d3688d : fffff880`02f55b09 00000000`00000001 00000000`00000000 00000000`00000000 : nt!MiTrimOrAgeWorkingSet+0x3a0
fffff880`02f55a80 fffff801`f0d37c20 : 00000000`00000003 fffff801`f0fe2d90 00000000`00000001 00000000`00000003 : nt!MiProcessWorkingSets+0x1dd
fffff880`02f55b70 fffff801`f0d37799 : 00000000`00000002 fffff880`02f55be0 00000000`00000008 00000000`00000000 : nt!MmWorkingSetManager+0x40
fffff880`02f55ba0 fffff801`f0cac625 : fffffa80`0cd82740 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KeBalanceSetManager+0xd9
fffff880`02f55c10 fffff801`f0ceae56 : fffff880`012d1180 fffffa80`0cd82740 fffff880`012dcf40 fffffa80`0cdba040 : nt!PspSystemThreadStartup+0x59
fffff880`02f55c60 00000000`00000000 : fffff880`02f56000 fffff880`02f50000 00000000`00000000 00000000`00000000 : nt!KiStartSystemThread+0x16


STACK_COMMAND: kb
FOLLOWUP_IP:
nt! ?? ::FNODOBFM::`string'+33081
fffff801`f0e738a5 cc int 3
SYMBOL_STACK_INDEX: 1
SYMBOL_NAME: nt! ?? ::FNODOBFM::`string'+33081
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: nt
IMAGE_NAME: n... Read more

http://www.eightforums.com/bsod-crashes-debugging/14320-windows-8-ntoskrnl-exe-bsod.html
Relevancy 52.03%

Hi ntoskrnl.exe Windows 8 BSOD I've been having BSODs for about a month now Typical ntoskrnl exe I've memtested BSOD Windows 8 ntoskrnl.exe HDD tested driver verified scanned for viruses and malware updated all my windows updates ran furmark ran several sfc scannows and I've gotten no leads BUT just today I got this little error on the bottom right saying my NVIDIA driver crashed because of a memory problem and that it was restarting Like I've said I've ran driver verifier with no bsods memtest no errors etc I really think it's my GPU but I don't have the money to just buy a new GPU without knowing for sure that it's the GPU and not just drivers or BSOD Windows 8 ntoskrnl.exe something I get several game crashes and tabs on google chrome will crash sometimes also I think that may be caused by my GPU I don't know what else would cause it On a recent bsod hall dll was another service that had caused the bsod according to the bsod viewer I'm attaching my zip from the dm log collector Thanks guys

A:BSOD Windows 8 ntoskrnl.exe

Code:
ASACPI.sys Fri Nov 2 02:54:34 2012 (509327DA)
Asus ATK0110 ACPI Utility (a known BSOD maker in Win7 and Win8). Also a part of many Asus utilities (Win8 versions available from Windows Update as an Optional Update - but check Asus first!)
http://www.carrona.org/drivers/driver.php?id=ASACPI.sys

RTCore64.sys Mon Mar 11 06:32:06 2013 (513D6C56)
RivaTuner/EVGA Precision/MSI Afterburner (known BSOD issues w/Win7)
http://www.carrona.org/drivers/driver.php?id=RTCore64.sys

agp440.sys Thu Aug 22 13:39:35 2013 (5215F877)
Intel AGP Bus Filter
http://www.carrona.org/drivers/driver.php?id=agp440.sys

nv_agp.sys Thu Aug 22 13:39:38 2013 (5215F87A)
NVIDIA nForce AGP Bus Filter
http://www.carrona.org/drivers/driver.php?id=nv_agp.sys

tap0901.sys Thu Aug 22 14:40:01 2013 (521606A1)
TAP-Win32 Adapter V9 or[br]OpenVPN driver or COMODO
http://www.carrona.org/drivers/driver.php?id=tap0901.sys

Rt64win7.sys Tue Jun 17 13:59:14 2014 (53A02D92)
Realtek RTL8168D/8111D Family PCI-E Gigabit Ethernet NIC
http://www.carrona.org/drivers/driver.php?id=Rt64win7.sys

nvhda64v.sys Mon Jul 21 16:17:53 2014 (53CD2111)
nVidia HDMI Audio Device (nForce chipset driver)
http://www.carrona.org/drivers/driver.php?id=nvhda64v.sys

nvvad64v.sys Thu Sep 25 17:39:23 2014 (5424372B)
NVIDIA Virtual Audio Driver
http://www.carrona.org/drivers/driver.php?id=nvvad64v.sys

NvStreamKms.sys Sat Nov 1 00:04:56 2014 (54541598)
nVidia Streaming Kernel service - may cause BSOD in Win8.1 systems (found in May 2014). Date/TimeStamp: Tue Apr 29 20:59:44 2014 (53604B00) MAY NOT BE A PROBLEM, this is a tenative posting - Appears that April 29 driver is a problem, July 2014 drivers seem OK
http://www.carrona.org/drivers/driver.php?id=NvStreamKms.sys

nvlddmkm.sys Wed Nov 12 21:51:31 2014 (5463C853)
nVidia Video drivers
http://www.carrona.org/drivers/driver.php?id=nvlddmkm.sys

Debug session time: Thu Dec 11 18:39:10.335 2014 (UTC + 1:00)
Loading Dump File [C:\Users\Mihael\SysnativeBSODApps\121114-25500-01.dmp]
Built by: 9600.17041.amd64fre.winblue_gdr.140305-1710
System Uptime: 1 days 10:40:16.346
Probably caused by : memory_corruption ( nt!MiAgeWorkingSet+2cb )
BugCheck 50, {fffff6800066e548, 0, fffff803fd69058b, 2}
BugCheck Info: PAGE_FAULT_IN_NONPAGED_AREA (50)
Bugcheck code 00000050
Arguments:
Arg1: fffff6800066e548, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffff803fd69058b, If non-zero, the instruction address which referenced the bad memory
address.
Arg4: 0000000000000002, (reserved)
BUGCHECK_STR: AV
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: Wow-64.exe
FAILURE_BUCKET_ID: AV_nt!MiAgeWorkingSet
BiosVersion = 0801
BiosReleaseDate = 12/21/2011
SystemManufacturer = ASUSTeK Computer INC.
SystemProductName = CM1630
??????????????????????????????????????????????????????????????????????????????????????``
Debug session time: Wed Dec 10 07:52:32.001 2014 (UTC + 1:00)
Loading Dump File [C:\Users\Mihael\SysnativeBSODApps\121014-24546-01.dmp]
Built by: 9600.16422.amd64fre.winblue_gdr.131006-1505
System Uptime: 1 days 0:37:09.418
Probably caused by : win32k.sys ( win32k!NtDCompositionDiscardFrame+10e )
BugCheck 3B, {c0000005, fffff802ab0ddc9d, ffffd0002bc59160, 0}
BugCheck Info: SYSTEM_SERVICE_EXCEPTION (3b)
Bugcheck code 0000003B
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff802ab0ddc9d, Address of the instruction which caused the bugcheck
Arg3: ffffd0002bc59160, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.
BUGCHECK_STR: 0x3B
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: dwm.exe
FAILURE_BUCKET_ID: 0x3B_win32k!NtDCompositionDiscardFrame
BiosVersion = 0801
BiosReleaseDate = 12/21/2011
SystemManufacturer = ASUSTeK Computer INC.
SystemProductName = CM1630
????????????????????????????????????????????????????... Read more

http://www.eightforums.com/bsod-crashes-debugging/58376-bsod-windows-8-ntoskrnl-exe.html
Relevancy 52.03%

Hey guys

Have just bought a second hand machine and have done a fresh install about 2 weeks ago.

Since then I have been getting BSOD crashes - ive been searching online for awhile on how to repair my errors, but still no solution

Have attached the necessary files (I hope)

Hope someone can help

A:Windows 7 BSOD x64 - ntoskrnl.exe

Please perform the following:

1. Download and save this tool to your desktop:
http://go.microsoft.com/fwlink/?linkid=52012

2. Run the tool, and then click Copy - ignore any errors if they appear

3. Use CTRL+V to paste the unedited results of the tool here in your next reply

http://www.sevenforums.com/bsod-help-support/300730-windows-7-bsod-x64-ntoskrnl-exe.html
Relevancy 52.03%

Hi mates,

I'm having random bluescreens in my Windows 7 Home Premium 64 bit, specially when trying to hibernate my computer (almost always), it's a king of freeze-up followed with bluescreen. Windows is working fine, but it's just the random bluescreen keeps bugging me.

I search through the web but can't find a real answer, only that BlueScreenView from NirSoft says that the problematic driver could be ntoskrnl.exe (but don't think that's the real culprit). I think I have drivers updated.

I upload here the dump generated by SF Diagnostic Tool. There are two .dmp files (last two days crashes).

Thanks in advance for your help!

A:BSOD in regards to ntoskrnl.exe in Windows 7

Hi ninguno.

The crash dumps are not very specific about the issue, but there is a hint .....

Can you unistall MagicISO and KernSafe Total Mounter, at least as a test?

Also, free up the startup. Windows does not need any other program to auto start with it, but the auto start programs often conflicts and causes various problems including BSODs.
Click on the Start button
Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the “Startup” tab.
Deselect all items other than the antivirus and the touchpad driver, SynTPEnh.
Apply > OK
Accept then restart.
Then put the computer to sleep and wake it up. Do it a few times. Let us know how the computer is running after doing those.
____________________________________

Code:
BugCheck 1000009F, {4, 258, fffffa80036ec170, fffff80000b9c510}

Implicit thread is now fffffa80`036ec170
Probably caused by : ntkrnlmp.exe ( nt!KiSwapContext+7a )

Followup: MachineOwner
---------

http://www.sevenforums.com/bsod-help-support/333283-bsod-regards-ntoskrnl-exe-windows-7-a.html
Relevancy 52.03%

? OS - Vista/ Windows 7 ? Windows 7
? x86 (32-bit) or x64 ? x64
? What was original installed OS on system? Not sure, Windows XP I think.
? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)? Retail
? Age of system (hardware) Not sure
? Age of OS installation - have you re-installed the OS? Two weeks after last reinstall.
? CPU
? Video Card - ATI Radeon HD 4550
? MotherBoard - Zotac Intel series Motherboard G31 - Value series
? Power Supply - brand & wattage

---

It usually crashes a few minutes after I turn the computer, sometimes even twice, then my PC works fine, at least at the moment.

A:BSOD - Windows 7 - ntoskrnl.exe

Are you using a ready boost device?

One names rdyboost.sys as the system that crashed the second the ATI video driver.
There is a good possibility neither is what actually caused the crash but just happened to be the driver that saw something was wrong and called for the stop, solid state memory devices are a good place to start if you had one plugged in at the time.

Code:
**************************Tue Oct 9 11:05:20.033 2012 (UTC - 4:00)**************************

Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Owner\Bsodapps\100912-20218-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: srv*c:/symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
Machine Name:
Kernel base = 0xfffff800`02c4f000 PsLoadedModuleList = 0xfffff800`02e93670
Debug session time: Tue Oct 9 11:05:20.033 2012 (UTC - 4:00)
System Uptime: 0 days 0:01:14.673
Loading Kernel Symbols
...............................................................
................................................................
..................
Loading User Symbols
Loading unloaded module list
....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 50, {fffff88006fc4000, 1, fffff880011bc91d, 0}
Could not read faulting driver name
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : rdyboost.sys ( rdyboost!memcpy+bd )

Followup: MachineOwner
---------

0: kd> kd: Reading initial command '!analyze -v; !sysinfo cpuspeed; !sysinfo SMBIOS; lmtsmn; q'
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced. This cannot be protected by try-except,
it must be protected by a Probe. Typically the address is just plain bad or it
is pointing at freed memory.
Arguments:
Arg1: fffff88006fc4000, memory referenced.
Arg2: 0000000000000001, value 0 = read operation, 1 = write operation.
Arg3: fffff880011bc91d, If non-zero, the instruction address which referenced the bad memory
address.
Arg4: 0000000000000000, (reserved)

Debugging Details:
------------------
Could not read faulting driver name

WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff80002efd100
fffff88006fc4000

FAULTING_IP:
rdyboost!memcpy+bd
fffff880`011bc91d 488941e0 mov qword ptr [rcx-20h],rax

MM_INTERNAL_CODE: 0

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

BUGCHECK_STR: 0x50

PROCESS_NAME: System

CURRENT_IRQL: 0

TRAP_FRAME: fffff880033ec9c0 -- (.trap 0xfffff880033ec9c0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=10a9079c00000000 rbx=0000000000000000 rcx=fffff88006fc4020
rdx=000001fffc8ab000 rsi=0000000000000000 rdi=0000000000000000
rip=fffff880011bc91d rsp=fffff880033ecb58 rbp=fffff88006fc4000
r8=0000000000001000 r9=00000000000000... Read more

http://www.techsupportforum.com/forums/f299/bsod-windows-7-ntoskrnl-exe-670028.html
Relevancy 52.03%

Hi, my Asus laptop been having bsod for almost a week. Usually it happens when I left it idle for a few minutes, can even happen on the login screen. Been searching around for the remedy , such as drive verifier, but it ends up bsod as well when enabled and I need to disable the drive verifier. Attached is a copy of dump as requested, thanks

A:Windows 8.1 BSOD ntoskrnl

Update drivers in red. Uninstall Asus Charger, physically detach any Razer hardware connected to your system as it seems to have caused BSODs. What Antivirus are you using? What Firewall software? Are you using any network monitoring software?
ATK: ASUSTeK Computer Inc. -Support- Drivers and Download ATK Package

Code:
LGBusEnum.sys Tue Nov 24 02:36:48 2009 (4B0B38B0)
Logitech Keyboard
http://www.carrona.org/drivers/driver.php?id=LGBusEnum.sys

LGVirHid.sys Tue Nov 24 02:36:48 2009 (4B0B38B0)
Logitech Gamepanel Virtual HID Device Driver
http://www.carrona.org/drivers/driver.php?id=LGVirHid.sys

atkwmiacpi64.sys Wed Sep 7 03:44:52 2011 (4E66CC94)
ATK WMIACPI Utility
http://www.carrona.org/drivers/driver.php?id=atkwmiacpi64.sys

AiCharger.sys Fri Sep 23 04:04:40 2011 (4E7BE938)
Asus Charger Driver [br] Likely BSOD cause - haven't seen recently (15Jan2013)
http://www.carrona.org/drivers/driver.php?id=AiCharger.sys

TurboB.sys Sat Jan 21 01:38:04 2012 (4F1A08EC)
Intel Turbo Boost driver
http://www.carrona.org/drivers/driver.php?id=TurboB.sys

LGSHidFilt.Sys Tue Feb 7 14:12:39 2012 (4F312347)
Logitech Gaming KMDF HID driver[br]KB or mouse
http://www.carrona.org/drivers/driver.php?id=LGSHidFilt.Sys

GEARAspiWDM.sys Thu May 3 21:56:17 2012 (4FA2E2E1)
CD-ROM Class Filter Driver by Gear Software.[br]Also comes with iTunes
http://www.carrona.org/drivers/driver.php?id=GEARAspiWDM.sys

iaStorA.sys Mon Jul 9 22:42:33 2012 (4FFB4239)
Intel RST (Rapid Storage Technology) driver
http://www.carrona.org/drivers/driver.php?id=iaStorA.sys

dump_iaStorA.sys Mon Jul 9 22:42:33 2012 (4FFB4239)
driver created to provide disk access during crash dump file generation
http://www.carrona.org/drivers/driver.php?id=dump_iaStorA.sys

RTKVHD64.sys Tue Jul 10 12:25:21 2012 (4FFC0311)
Realtek High Definition Audio Function Driver
http://www.carrona.org/drivers/driver.php?id=RTKVHD64.sys

kbfiltr.sys Thu Aug 2 05:22:22 2012 (5019F26E)

kbfiltr.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

AMPPAL.sys Thu Sep 13 13:30:17 2012 (5051C3C9)
Intel? Centrino? Bluetooth 3.0 + High Speed Virtual Adapter driver
http://www.carrona.org/drivers/driver.php?id=AMPPAL.sys

usb3Hub.sys Wed Sep 26 13:04:00 2012 (5062E120)

usb3Hub.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

XHCIPort.sys Wed Sep 26 13:04:01 2012 (5062E121)
Intel USB-IF xHCI USB Host Controller/Intel Wireless Display Driver
http://www.carrona.org/drivers/driver.php?id=XHCIPort.sys

AsusTP.sys Mon Oct 29 19:23:54 2012 (508EC9BA)
Asis transformer pad filter driver
http://www.carrona.org/drivers/driver.php?id=AsusTP.sys

HWiNFO64A.SYS Wed Nov 14 12:15:59 2012 (50A37D6F)
HWiNFO32 Kernel Driver
http://www.carrona.org/drivers/driver.php?id=HWiNFO64A.SYS

HECIx64.sys Mon Dec 17 20:32:21 2012 (50CF7345)
Intel Management Engine Interface
http://www.carrona.org/drivers/driver.php?id=HECIx64.sys

ew_jubusenum.sys Mon Mar 4 09:32:48 2013 (51345C30)
HUAWEI Mobile Connect - Bus Enumerate Device
http://www.carrona.org/drivers/driver.php?id=ew_jubusenum.sys

L1C63x64.sys Mon Apr 1 05:15:17 2013 (5158FBC5)
Qualcomm Atheros AR8151 PCI-E Gigabit Ethernet Controller (NDIS 6.30)
http://www.carrona.org/drivers/driver.php?id=L1C63x64.sys

iBtFltCoex.sys Thu Apr 18 16:17:24 2013 (51700074)
Intel Centrino Wireless (Bluetooth Adapter driver
http://www.carrona.org/drivers/driver.php?id=iBtFltCoex.sys

btmaux.sys Mon Jul 22 16:19:46 2013 (51ED3F82)
Intel Bluetooth Auxiliary Service
http://www.carrona.org/drivers/driver.php?id=btmaux.sys

iwdbus.sys Thu Jul 25 03:06:12 2013 (51F07A04)
Intel WIDI Bus Enumerator driver[br]Related to Intel Widi - Wireless Display
http://www.carrona.org/drivers/driver.php?id=iwdbus.sys

intelppm.sys Thu Aug 22 10:46:35 20... Read more

http://www.eightforums.com/bsod-crashes-debugging/61776-windows-8-1-bsod-ntoskrnl.html
Relevancy 52.03%

Hello everybody.

Currently getting a BSOD related to ntoskrnl.exe..

It seems to occur randomly, though there are some events (plugging in a USB device, jostling the system in any way) that seem to spur it on more quickly.

I have run virus scans, Memtestx86, and other hardware diagnostics; everything has come back fine. I'm fairly certain it is a hardware problem however, as I have done three or four clean installs of windows to no avail. The system also crashes in safe mode.
Specs:
Asus Z97-A
Intel i7 4790k
2x 8GB Kingston Hyper-X
Nvidia GTX 560
Samsung 840 EVO (240GB)
Hitachi HDD (500GB)
Asus DVD Drive

A:Windows 7 ntoskrnl.exe BSOD

Hi jdez99.

First of all, make it sure that your SSD is having the latest firmware.
How to Upgrade Samsung SSD Firmware | StorageReview.com - Storage Reviews

And uninstall MagicISO or MagicDisc whichever you have installed.

Let us know the result upto this point.
________________________________________

Code:
BugCheck F4, {3, fffffa800ea3c8c0, fffffa800ea3cba0, fffff8000318f940}

----- ETW minidump data unavailable-----
Probably caused by : wininit.exe

Followup: MachineOwner
---------

http://www.sevenforums.com/bsod-help-support/367678-windows-7-ntoskrnl-exe-bsod.html
Relevancy 52.03%

I windows BSOD 7 ntoskrnl.exe installed a new set of hard drives as a RAID I ve have older versions of the same hard drive e g ntoskrnl.exe windows 7 BSOD same manufacturer and size but bought earlier in the some computer also on RAID Everything was working fine until I did something stupid which I did not know was stupid at the time I changed the drive letter of the new disks to drive D my OS is on a SSD as Drive C Then shut down the computer Then added my old hard disks back which were Drive E After turning on the computer it would keep resetting during windows load I finally had to do a system restore to a previous point through the Windows installation disc Now between minutes to a few hours my computer will reboot randomly due to a blue screen I ntoskrnl.exe windows 7 BSOD did install Intel Rapid Storage from Asus website thinking ntoskrnl.exe windows 7 BSOD that would help - and it was stable longer until I got the most recent error quot KMODE EXCEPTION NOT HANDLED quot Usually I was getting the quot ATTEMPTED SWITCH FROM DPC quot Thanks in advance for your help Here are my pc specs - Asus P Z -V motherboard - i - K CPU - GB RAM - intel GB SSD as drive C and OS - x TB Seagate RPM MB cache drives in Raid as Drive D these are the new drives - x TB Seagate RPM MB cache drives in Raid as Drive E - use motherboard s onboard video card lan audio - windows -bit professional service pack I installed BlueScreenView and here is the output Dump File - - dmp Crash Time PM Bug Check String KMODE EXCEPTION NOT HANDLED Bug Check Code x e Parameter Parameter Parameter Parameter Caused By Driver iaStorV sys Caused By Address iaStorV sys b File Description Product Name Company File Version Processor x Crash Address ntoskrnl exe cd Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time PM Bug Check String ATTEMPTED SWITCH FROM DPC Bug Check Code x b Parameter fffffa ce Parameter fffffa bb Parameter Parameter Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe fc a File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win sp gdr - Processor x Crash Address ntoskrnl exe fc a Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time PM Bug Check String ATTEMPTED SWITCH FROM DPC Bug Check Code x b Parameter fffffa d Parameter fffff cc Parameter Parameter Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe fc a File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win sp gdr - Processor x Crash Address ntoskrnl exe fc a Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time AM Bug Check String ATTEMPTED SWITCH FROM DPC Bug Check Code x b Parameter fffffa d b Parameter fffff cc Parameter Parameter Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe fc a File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win sp gdr - Processor x Crash Address ntoskrnl exe fc a Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time AM Bug Check String ATTEMPTED SWITCH FROM DPC Bug Check Code x b Parameter fffffa d bb Parameter fffff cc Parameter Parameter Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe fc a File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win sp gdr - Processor x Crash Address ntoskrnl exe fc a Stack Address St... Read more

A:ntoskrnl.exe windows 7 BSOD

http://www.faultwire.com/solutions-fatal_error/A-wait-operation-attach-process-or-yield-was-0x000000B8-*1185.html

http://www.bleepingcomputer.com/forums/t/447532/ntoskrnlexe-windows-7-bsod/