Windows Support Forum

ntoskrnl.exe+75bc0 Causing multiple BSOD

Q: ntoskrnl.exe+75bc0 Causing multiple BSOD

This is a month old build that has been plagued by this kernel BG of Kingston extreme ram Intel I Causing multiple BSOD ntoskrnl.exe+75bc0 K processor Gigabyte Motherboard and a later added EVGA GB video card All inside of a corsair case and W PS I do ntoskrnl.exe+75bc0 Causing multiple BSOD have an Associates in Networking and computer tech but I have never diagnosed a blue screen problem before so this is all new to me As stated in the thread title ntoskrnl.exe+75bc0 Causing multiple BSOD it is the ntoskrnl exe bc kernel that is causing the blue screens and I am not sure what to make of it I used blue screen view and from the help of the board here I used the windows debugging tool and that also pointed to the same ntoskrnl exe bc kernel I downloaded the windows diagnostic tool and hopefully that was done right and properly uploaded because I could use the help I did run memtest and was given a clean bill of health but I might run it again just to be on the safe side I would greatly appreciate any help And merry Christmas John

Relevancy 100%
Preferred Solution: ntoskrnl.exe+75bc0 Causing multiple BSOD

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: ntoskrnl.exe+75bc0 Causing multiple BSOD

Code:
Microsoft (R) Windows Debugger Version 6.2.9200.20512 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\USER\Downloads\Compressed\SF_24-12-2014\SF_24-12-2014\122314-21231-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols" target="_blank" class="invilink">http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.18409.amd64fre.win7sp1_gdr.140303-2144
Machine Name:
Kernel base = 0xfffff800`0344c000 PsLoadedModuleList = 0xfffff800`0368f890
Debug session time: Tue Dec 23 11:32:05.166 2014 (UTC + 6:00)
System Uptime: 0 days 2:26:31.040
Loading Kernel Symbols
...............................................................
................................................................
..............................
Loading User Symbols
Loading unloaded module list
...............
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1A, {41790, fffffa800a7ff910, ffff, 0}

Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+35084 )

Followup: MachineOwner
---------

4: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

MEMORY_MANAGEMENT (1a)
# Any other values for parameter 1 must be individually examined.
Arguments:
Arg1: 0000000000041790, A page table page has been corrupted. On a 64 bit OS, parameter 2
contains the address of the PFN for the corrupted page table page.
On a 32 bit OS, parameter 2 contains a pointer to the number of used
PTEs, and parameter 3 contains the number of used PTEs.
Arg2: fffffa800a7ff910
Arg3: 000000000000ffff
Arg4: 0000000000000000

Debugging Details:
------------------


BUGCHECK_STR: 0x1a_41790

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

PROCESS_NAME: rundll32.exe

CURRENT_IRQL: 0

LAST_CONTROL_TRANSFER: from fffff80003532d50 to fffff800034c1bc0

STACK_TEXT:
fffff880`0e6776e8 fffff800`03532d50 : 00000000`0000001a 00000000`00041790 fffffa80`0a7ff910 00000000`0000ffff : nt!KeBugCheckEx
fffff880`0e6776f0 fffff800`034f47d9 : 00000000`00000000 00000000`739affff fffffa80`00000000 00000000`00000000 : nt! ?? ::FNODOBFM::`string'+0x35084
fffff880`0e6778b0 fffff800`037db0f1 : fffffa80`106b7cd0 00000000`00000000 00000000`00000000 00000000`00000000 : nt!MiRemoveMappedView+0xd9
fffff880`0e6779d0 fffff800`037db4f3 : 00000000`00000000 00000000`73950000 fffffa80`00000001 fffffa80`10fd8e60 : nt!MiUnmapViewOfSection+0x1b1
fffff880`0e677a90 fffff800`034c0e53 : fffffa80`0d16e060 fffff880`0e677b60 fffffa80`0de3e790 00000000`00000026 : nt!NtUnmapViewOfSection+0x5f
fffff880`0e677ae0 00000000`76ea155a : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
00000000`0014ad38 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x76ea155a


STACK_COMMAND: kb

FOLLOWUP_IP:
nt! ?? ::FNODOBFM::`string'+35084
fffff800`03532d50 cc int 3

SYMBOL_STACK_INDEX: 1

SYMBOL_NAME: nt! ?? ::FNODOBFM::`string'+35084

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: nt

IMAGE_NAME: ntkrnlmp.exe

DEBUG_FLR_IMAGE_TIMESTAMP: 531590fb

FAILURE_BUCKET_ID: X64_0x1a_41790_nt!_??_::FNODOBFM::_string_+35084

BUCKET_ID: X64_0x1a_41790_nt!_??_::FNODOBFM::_string_+35084

Followup: MachineOwner
---------

Code:
Microsoft (R) Windows Debugger Version 6.2.9200.20512 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\USER\Downloads\Compressed\SF_24-12-2014\SF_24-12-2014\122314-20607-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.18409.amd64fre.win7sp1_gdr.140303-2144
Machine Name:
Kernel base = 0xfffff800`03452000 PsLoadedModuleList = 0xfffff800`03695890
Debug session time: Tue Dec 23 15:01:26.330 2014 (UTC + 6:00)
System Uptime: 0 days 3:28:34.205
Loading Kernel Symbols
.

Press ctrl-c (cdb, kd, ntsd) or ctrl-break (windbg) to abort symbol loads that take too long.
Run !sym noisy before .reload to track down problems loading symbols.

..............................................................
................................................................
.............................
Loading User Symbols
Loading unloaded module list
................
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 50, {fffff8a204298248, 1, fffff880012ab506, 5}


Could not read faulting driver name
Probably caused by : Ntfs.sys ( Ntfs!NtfsOpenAttribute+326 )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced. This cannot be protected by try-except,
it must be protected by a Probe. Typically the address is just plain bad or it
is pointing at freed memory.
Arguments:
Arg1: fffff8a204298248, memory referenced.
Arg2: 0000000000000001, value 0 = read operation, 1 = write operation.
Arg3: fffff880012ab506, If non-zero, the instruction address which referenced the bad memory
address.
Arg4: 0000000000000005, (reserved)

Debugging Details:
------------------


Could not read faulting driver name

WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff800036ff100
GetUlongFromAddress: unable to read from fffff800036ff1c0
fffff8a204298248 Paged pool

FAULTING_IP:
Ntfs!NtfsOpenAttribute+326
fffff880`012ab506 4c8918 mov qword ptr [rax],r11

MM_INTERNAL_CODE: 5

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

BUGCHECK_STR: 0x50

PROCESS_NAME: svchost.exe

CURRENT_IRQL: 1

TRAP_FRAME: fffff8800d2d86b0 -- (.trap 0xfffff8800d2d86b0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=fffff8a204298248 rbx=0000000000000000 rcx=fffff8a0043008b0
rdx=0000000000000000 rsi=0000000000000000 rdi=0000000000000000
rip=fffff880012ab506 rsp=fffff8800d2d8840 rbp=0000000000000000
r8=0000000000000000 r9=0000000000000000 r10=fffff8a0002a9001
r11=fffff8a004300948 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei ng nz na pe nc
Ntfs!NtfsOpenAttribute+0x326:
fffff880`012ab506 4c8918 mov qword ptr [rax],r11 ds:fffff8a2`04298248=????????????????
Resetting default scope

LAST_CONTROL_TRANSFER: from fffff800035445b3 to fffff800034c7bc0

STACK_TEXT:
fffff880`0d2d8548 fffff800`035445b3 : 00000000`00000050 fffff8a2`04298248 00000000`00000001 fffff880`0d2d86b0 : nt!KeBugCheckEx
fffff880`0d2d8550 fffff800`034c5cee : 00000000`00000001 fffff8a2`04298248 fffffa80`12486000 fffffa80`1296c4b0 : nt! ?? ::FNODOBFM::`string'+0x43801
fffff880`0d2d86b0 fffff880`012ab506 : fffffa80`1296c4b0 fffff880`0effda00 fffff8a0`00000002 fffff8a0`04300998 : nt!KiPageFault+0x16e
fffff880`0d2d8840 fffff880`0129a115 : fffffa80`0d00b700 fffffa80`0ddfdf70 fffffa80`13890180 fffff8a0`04300998 : Ntfs!NtfsOpenAttribute+0x326
fffff880`0d2d8950 fffff880`01295f5b : fffff880`0effdae0 fffffa80`0d00b700 fffff8a0`04300998 fffff8a0`00000024 : Ntfs!NtfsOpenExistingAttr+0x145
fffff880`0d2d8a10 fffff880`012991cf : fffffa80`0d00b700 fffffa80`0ddfdc60 fffff8a0`04300998 fffff880`00000024 : Ntfs!NtfsOpenAttributeInExistingFile+0x5ab
fffff880`0d2d8ba0 fffff880`012a9306 : fffffa80`0d00b700 fffffa80`0ddfdc60 fffff8a0`04300998 00000000`00000701 : Ntfs!NtfsOpenExistingPrefixFcb+0x1ef
fffff880`0d2d8c90 fffff880`012a6af3 : fffffa80`0d00b700 fffffa80`0ddfdc60 fffff880`0d2d8e70 fffff880`0d2d8ea8 : Ntfs!NtfsFindStartingNode+0x5e6
fffff880`0d2d8d60 fffff880`012113ad : fffffa80`0d00b700 fffffa80`0ddfdc60 fffff880`0effdae0 fffffa80`0dcb7100 : Ntfs!NtfsCommonCreate+0x3d3
fffff880`0d2d8f30 fffff800`034bf6b7 : fffff880`0effda50 00000000`00000000 00000000`00000000 00000000`00000000 : Ntfs!NtfsCommonCreateCallout+0x1d
fffff880`0d2d8f60 fffff800`034bf678 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KxSwitchKernelStackCallout+0x27
fffff880`0effd920 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSwitchKernelStackContinue


STACK_COMMAND: kb

FOLLOWUP_IP:
Ntfs!NtfsOpenAttribute+326
fffff880`012ab506 4c8918 mov qword ptr [rax],r11

SYMBOL_STACK_INDEX: 3

SYMBOL_NAME: Ntfs!NtfsOpenAttribute+326

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: Ntfs

IMAGE_NAME: Ntfs.sys

DEBUG_FLR_IMAGE_TIMESTAMP: 52e1be8a

FAILURE_BUCKET_ID: X64_0x50_Ntfs!NtfsOpenAttribute+326

BUCKET_ID: X64_0x50_Ntfs!NtfsOpenAttribute+326

Followup: MachineOwner
---------
Take memtest. Run for 8 passes and test each stick in a know good slot for an additional 6 passes.RAM - Test with Memtest86+





Quote:
The goal is to test all the RAM sticks and all the motherboard slots.

Check your motherboard manual to ensure the RAM sticks are in the recommended motherboard slots. Some motherboards have very specific slots required for the number of RAM sticks installed.

If you get errors, stop the test and continue with the next step.

1. Remove all but one stick of RAM from your computer (this will be RAM stick #1), and run Memtest86 again, for 7 passes.*Be sure to note the RAM stick, use a piece of tape with a number, and note the motherboard slot.
If this stick passes the test then go to step #3.

2. If RAM stick #1 has errors, repeat the test with RAM stick #2 in the same motherboard slot.*If RAM stick #2 passes, this indicates that RAM stick #1 may be bad. If you want to be absolutely sure, re-test RAM stick #1 in another known good slot.
*If RAM stick #2 has errors, this indicates another possible bad RAM stick, a possible motherboard slot failure or inadequate settings.
3. Test the next stick of RAM (stick #2) in the next motherboard slot.*If this RAM stick has errors repeat step #2 using a known good stick if possible, or another stick.
*If this RAM stick has no errors and both sticks failed in slot#1, test RAM stick #1 in this slot.
4. If you find a stick that passes the test, test it in all the other motherboard slots.

If Part 2 testing shows errors, and all tests in Part 3 show errors, you will need to test the RAM sticks in another computer and/or test other RAM in your computer to identify the problem.

In this way, you can identify whether it is a bad stick of RAM, a bad motherboard, or incompatibility between the sticks.




Information
Errors are sometimes found after 8 passes.



Tip
Memtest should be done overnight.

http://www.sevenforums.com/bsod-help-support/356264-ntoskrnl-exe-75bc0-causing-multiple-bsod.html
Relevancy 106.64%

Please help! I feel in over my head for once.

I believe all of my drivers are current. I've reset BIOS to recommended settings. I ran one pass on memtest with no errors. I've run virus scans.

I'm not sure if it's related, but I think I may have had/have a memory leak related to svchost.exe LOCAL SERVICE EventSystem COM + Event System. The other day this Process was using 4GB of RAM, and now I'm getting all these BSODs. I could be wrong on which svchost it was.

DM Log output, BlueScreenView grid, and zip of minidump files attached.

Thanks.

A:Multiple BSOD related to ntoskrnl.exe+75bc0

Here's a link to my SkyDrive folder with lots of logs and file outputs related to this.
https://onedrive.live.com/redir?resi...85159E60%21142

http://www.sevenforums.com/bsod-help-support/333381-multiple-bsod-related-ntoskrnl-exe-75bc0.html
Relevancy 103.63%

I am working on a laptop that has been getting random BSOD usually while nothing special is running. I have run memory checks, several antivirus scans to remove a lot of malware and trojans. Finally at my wits end with this. I would very much appreciate it if someone could point me in the right direction as to what is causing it.

Acer Aspire 7750-6669
Intel Core I3-2350M
6GB memory
1TB

Thanks in advance
Whyastarin

A:Random BSOD multiple errors ntoskrnl.exe+75bc0 bug check 0x00000101

Hello whyastarin .

Please remove IRST:

Code:
lmvm iaStor
Browse full module list
start end module name
fffff880`0109b000 fffff880`011ef000 iaStor T (no symbols)
Loaded symbol image file: iaStor.sys
Image path: \SystemRoot\system32\drivers\iaStor.sys
Image name: iaStor.sys
Browse all global symbols functions data
Timestamp: Thu Jan 13 03:50:12 2011
Driver Reference Table - iaStor.sys







  
Quote: Originally Posted by Arc


Get rid of intel rapid storage. First uninstall it from Control Panel > Programs and Features.
Then Uninstall the driver from device manager.

Right click on "my computer" icon and click "manage" on the context menu.
It will open the "computer management" window.
Select "Device Manager" in the left pane, It will list all the existing devices up.
Expand "IDE ATA/ATAPI controllers" by clicking on the triangle in front of it.
Select one Intel device item under it, right click, uninstall.
Continue the process for all Intel items under "IDE ATA/ATAPI controllers"
Now restart the computer. At restart, windows will auto configure the appropriate native system driver.


Remove AVAST:
Remove Avast Anti-Virus following this article - avast! Uninstall Utility | Download aswClear
Install Microsoft Security Essentials as an alternative.


Missing SAS (SuperAntiSpyware) files:

Code:
SASDIFSV ROOT\LEGACY_SASDIFSV\0000 This device is not present, is not working properly, or does not have all its drivers installed.
SASKUTIL ROOT\LEGACY_SASKUTIL\0000 This device is not present, is not working properly, or does not have all its drivers installed.
Please reinstall.
Cleanup your startup:
Troubleshoot Application Conflicts by Performing a Clean Startup

Are you using Norton Online Backup?, if not please remove!

Code:
Start Menu\Programs\Norton Online Backup

Keep us posted .

http://www.sevenforums.com/bsod-help-support/312481-random-bsod-multiple-errors-ntoskrnl-exe-75bc0-bug-check-0x00000101.html
Relevancy 93.31%

I have been getting BSODs everyday now for the past 2 days.
They happen randomly whether im playing a game, watchin a stream, or just sitting on my computer.
Any help would be much appreciated.

A:Multiple BSODs al from ntoskrnl.exe+75bc0

Please provide detailed system specifications as per this tutorial:
System Info - See Your System Specs

http://www.sevenforums.com/bsod-help-support/325558-multiple-bsods-al-ntoskrnl-exe-75bc0.html
Relevancy 92.02%

Hi to make things easier for you dxgmms1.sys,ntoskrnl.exe,Ntfs.sys BSOD Address:ntoskrnl.exe+75bc0; below is the Bug Check String Driver and crash address SYSTEM SERVICE EXCEPTION dxgmms sys ntoskrnl exe bc MEMORY MANAGEMENT ntoskrnl exe ntoskrnl exe bc SYSTEM SERVICE EXCEPTION ntoskrnl exe ntoskrnl exe bc NTFS FILE SYSTEM Ntfs sys ntoskrnl exe bc IRQL NOT LESS OR EQUAL ntoskrnl exe ntoskrnl exe bc unrelated how could I make nice table above I have searched the forum Problem BSOD randomly usually graphics related eg flash games in chrome graphics related software Mathematica Problem I use an internet usb G device to connect to internet Every morning the device will not connect to internet and computer will hang on shutting down screen when I BSOD Address:ntoskrnl.exe+75bc0; dxgmms1.sys,ntoskrnl.exe,Ntfs.sys restart I have to manually turn off and back on again I think this may be a dying capacitor on motherboard that needs boot's to get excited Problem Chrome quot aw snap quot happens regularly and is usually flash content related even ad banners seem to cause it from time to time I have reinstalled chrome checked plugins etc etc no luck Internet explorer runs stable but for example in flash games it seems to momentarily freeze and then catch up BSOD Address:ntoskrnl.exe+75bc0; dxgmms1.sys,ntoskrnl.exe,Ntfs.sys with itself again These are moments where I think chrome would have crashed Things I've done SFC scan All's well Memtest I did pass it took an hour everything fine Will put it on over night tonight Checked for latest drivers Also have latest BIOS Checked win update Ran Intel Burn everything ok max stress over Gb RAM run min max temp thank you Noctua NH-C P this is with quiet adaptor too lol Ran malwarebytes found nothing toxic Ran SSDlife Free health SSD seems fine Bought a new motherboard assuming that the current one is going bad I haven't switched over to it yet and thought I should investigate a little further before I do ie bad RAM CPU Power Supply SSD CPU seems fine RAM passed test but will test further My own quot opinion quot until today was that there is a fault on motherboard probably with usb hardware Now I realise that it could be the power supply but I have no way to test this bar buy a new one My analysis bad motherboard or bad PSU Either way not getting away with cheap fix methinks UPDATE I enabled verifier exe using this Driver Verifier - Enable and Disable Windows crashes just before going to desktop I had to boot last known config to get up and running again IE I CAN RELIABLY CREATE BSOD USING VERIFIER EXE WITH GIVEN INSTRUCTIONS So I am going to try focusing on drivers loaded at startup by process of elimination Is there a quick way to find out which one Below is the Check String Driver and crash address for the BSOD's when using verifier exe IRQL NOT LESS OR EQUAL ntoskrnl exe ntoskrnl exe bc DRIVER IRQL NOT LESS OR EQUAL RNDISMPX SYS RNDISMPX SYS a UPDATE If I choose or more non Microsoft drivers in verifier exe I get BSOD different check strings but always at the same address Also computer seems more unstable since engaging with verifier exe I feel I have given a thorough evaluation based on information in this forum and would appreciate feedback from those with more expertise than I UPDATE Another Memtest gave errors on pass Questions any chance poor power supply can cause this anyone have experience increasing voltage to make this go away would bad RAM explain all my problems ok fine i'll go through RAM and the slots and find the bad one sigh major sigh positively tragic sigh UPDATE Started with slot with stick of RAM Did memtest but had an idea I turned on verifier exe with all rd party drivers selected and my theory was to replicate the BSOD I got earlier at startup Went through each slot each RAM combo's of RAM and then to add insult to injury with all sticks in exactly same as before no BSOD Life is tough So maybe RAM wasn't properly seated all this time or maybe I need to test the RAM proper... Read more

A:BSOD Address:ntoskrnl.exe+75bc0; dxgmms1.sys,ntoskrnl.exe,Ntfs.sys

**************UPDATE 5 ****************




The sequence of events went as follows.
RAM test 1 pass was passed. Verifier.exe caused immediate BSOD on windows start when activated. Trying to hunt down drivers revealed any combo of 3 or more drivers gave BSOD at startup. Randomly decided to recheck RAM. Failed memtest after 27 minutes pass 1. Found one RAM stick that passed after one pass slot0. Got fed up of waiting for other slot's. Devised a plan to use verifier to check the RAM by seeing which combo's of RAM sticks gave BSOD on startup. All combo's passed. And now verifier does not give BSOD on any setting. Began to hate life. Cheered myself up with prospect of sleep. Put all 16 Gb RAM in properly and ran mentest for 18 hours, 6 passes. No error. Still no verifier.exe errors when enabled. Wrote this update.


If RAM failed after 27min one test, and then after swapping around a retest of 18 hours has no error, one would presume the RAM may be ok. Equally, I believe one could say the RAM is suspect. So, if the test is failed it really doesn't tell us anything except there is a problem somewhere. But we know there is a problem since we have BSOD!!! If I hadn't rerun the test I wouldn't question the RAM.

So the question is: how do I categorically ensure that a stick of RAM is good? Is memtest on RAM with an alternative working computer enough?



In summary:

I ran memtest for 18 hours, which was 6 passes. No problems detected. Using verifier.exe with protocols given on this forum I no longer get BSOD.

Currently my hypothesis is that the RAM was never seated correctly, or given that it takes a bit of force to insert correctly into motherboard, the flexing has at least temporarily defused whatever fault was causing my BSOD. Tenuous I know. But I really have no other explanation other than something somewhere on the motherboard or power is failing, or even the RAM.

http://www.sevenforums.com/bsod-help-support/351171-bsod-address-ntoskrnl-exe-75bc0-dxgmms1-sys-ntoskrnl-exe-ntfs-sys.html
Relevancy 90.3%

Hello everyone My computer seems to causing BSOD multiple ntoskrnl.exe be randomly crashing most of the time while I'm gaming or trying to use my Oculus Rift Sometimes it will crash almost immediately other times it will be hours or sometimes not at all I've tried somewhat troubleshooting the issue but I now ntoskrnl.exe causing multiple BSOD need your help to actually fix it I'm running Windows Pro ntoskrnl.exe causing multiple BSOD here's a little list of what I've already tried Done all Windows UpdatesUnistalled AvastRan Memtest for about passes i'm going to do a full tonight Tried using driver verifier but my system wouldn't even boot why I think its some random ntoskrnl.exe causing multiple BSOD driver issue Ran chkdisk on my ssdI've stress tested and monitored my gpu so its not overheating I built this desktop a little over a year ago and its really always had these random crashes Just recently started playing a bunch of Overwatch Beta and using my new Oculus Rift which is why now I really want to fix it Anyways let me know what else I can do or should try Thanks for any help Attached is the zip with the info

http://www.tenforums.com/bsod-crashes-debugging/49347-ntoskrnl-exe-causing-multiple-bsod.html
Relevancy 86.86%

Fairly new computer I installed a Radeon HD graphics card after I initially bought the computer was running fine ntoskrnl.exe+75bc0 BSOD... for a while and then I BSOD... ntoskrnl.exe+75bc0 believe issues started when I ran Spybot and Adaware one day Computer was freezing and getting colors all across the screen and also restarting itself BSOD... ntoskrnl.exe+75bc0 I removed the Radeon graphics card and it stopped doing this Now I just get the BSOD and then it restarts happens about once a day No errors in the device Manager Below is Speccy MiniToolBox log and the BlueScreenView in that order I tried to attach the crash dump zip file but it was kb after I zipped it Speccy http speccy piriform com results agXl qUHTa j BqZuJU Mw MiniToolBox MiniToolBox by Farbar Version - - Ran by zj administrator on - - at Running from C Users zj Downloads Microsoft Windows Professional Service Pack X Boot Mode Normal Event log errors Application errors Error PM Source WinMgmt User Description root CIMV SELECT FROM InstanceModificationEvent WITHIN WHERE TargetInstance ISA Win Processor AND TargetInstance LoadPercentage gt x Error PM Source BstHdAndroidSvc User Description Service cannot be started System ApplicationException Cannot start service Service did not stop gracefully the last time it was run at BlueStacks hyperDroid Service Service OnStart String args at System ServiceProcess ServiceBase ServiceQueuedMainCallback Object state Error PM Source WinMgmt User Description root CIMV SELECT FROM InstanceModificationEvent WITHIN WHERE TargetInstance ISA Win Processor AND TargetInstance LoadPercentage gt x Error PM Source LMS User NT AUTHORITY Description LMS Service lost connection to HECI driver Error PM Source WinMgmt User Description root CIMV SELECT FROM InstanceModificationEvent WITHIN WHERE TargetInstance ISA Win Processor AND TargetInstance LoadPercentage gt x Error PM Source BstHdAndroidSvc User Description Service cannot be started System ApplicationException Cannot start service Service did not stop gracefully the last time it was run at BlueStacks hyperDroid Service Service OnStart String args at System ServiceProcess ServiceBase ServiceQueuedMainCallback Object state Error PM Source Application Error User Description Faulting application name NinjaTrader exe version time stamp x e d Faulting module name ntdll dll version time stamp x ea e Exception code xc Fault offset x c Faulting process id x Faulting application start time xNinjaTrader exe Faulting application path NinjaTrader exe Faulting module path NinjaTrader exe Report Id NinjaTrader exe Error AM Source WinMgmt User Description root CIMV SELECT FROM InstanceModificationEvent WITHIN WHERE TargetInstance ISA Win Processor AND TargetInstance LoadPercentage gt x Error AM Source BstHdAndroidSvc User Description Service cannot be started System ApplicationException Cannot start service Service did not stop gracefully the last time it was run at BlueStacks hyperDroid Service Service OnStart String args at System ServiceProcess ServiceBase ServiceQueuedMainCallback Object state Error PM Source LMS User NT AUTHORITY Description LMS Service lost connection to HECI driver System errors Error PM Source Service Control Manager User Description The BlueStacks Android Service service terminated with the following error Error PM Source Service Control Manager User Description The Network List Service service depends on the Network Location Awareness service which failed to start because of the following error Error PM Source Service Control Manager User Description The Network List Service service depends on the Network Location Awareness service which failed to start because of the following error Error PM Source Service Control Manager User Description The Network List Service service depends on the Network Location Awareness service which failed to start because of the following error Error PM Source Service Control Manager User Description The Network List Service service depends on th... Read more

A:BSOD... ntoskrnl.exe+75bc0

do financial trading on this machine by any chance?
 
I'd remove Adaware, Spybot, Online Threat Engine and any other malware removal tools you have. thne put a top free antivirus like MSE or Avira. Then consider a more dedicated, configurable firewall like Comodo or ZoneAlarm.
 
Could be a dying power supply... but better to tie up your security if this is a financial machine.

http://www.bleepingcomputer.com/forums/t/517809/bsod-ntoskrnlexe75bc0/
Relevancy 86.86%

Hi,

For the past couple moths my computer has been bluescreening due to ntoskrnl.exe +75bc0.
It happens randomly sometimes when I'm playing a game other times when I'm watching youtube or a stream.

Any help would be appreciated.

A:BSOD ntoskrnl.exe +75bc0

Code:
BugCheck A, {fffff68000109008, 0, 0, fffff80002da83b6}
This bugcheck means that pageable memory was referenced at an IRQL too high. This is an illegal operation as pageable memory can only be referenced at IRQL 1 (APC Level) or IRQL 0 (Passive Level).

So why doesn't the IRQL lower to access the memory address?

Windows doesn't work that way for good reason.
An Interrupt request (IRQ) has been initiated it is serviced in an order of priorities, for example an IRQ has been sent to service an I/O and an IRQ has been sent to draw a Window for an application, the disk I/O is more important so it is put at an IRQL higher than the application request. Right, so the I/O IRQ has to be completed before the IRQL can lower to service the IRQs below it.
Now, when something tries to access pageable memory at an IRQL higher than APC level it generates a page fault because the memory has been paged out to disk, now this page fault cannot be resolved by the trap handler because the IRQL is too high but the page fault needs servicing.

It then becomes a stalemate, you can't complete the page fault because the IRQL is too high but you cannot lower the IRQL because it needs servicing so the system bugchecks.

However, the strange thing I've noticed is this:


Code:
0000000000000000, IRQL
This IRQL wasn't too high,

Use Kaspersky's TDSSKiller Anti Rootkit utility

Anti-rootkit utility TDSSKiller

Uninstall these programs.


Code:
Start Menu\Programs\MotioninJoy Public:Start Menu\Programs\MotioninJoy Public

Code:
Start Menu\Programs\DAEMON Tools Lite Public:Start Menu\Programs\DAEMON Tools Lite Public
Find alternatives as they're caused quite a lot of issues.

http://www.sevenforums.com/bsod-help-support/334576-bsod-ntoskrnl-exe-75bc0.html
Relevancy 86.86%

My system has been BSOD randomly for 3-4 months.
Would be grateful if someone can help me. SF diagnostic log attached.

A:BSOD ntoskrnl.exe +75bc0

Code:
Microsoft (R) Windows Debugger Version 6.2.9200.20512 X86
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\Usra\Downloads\SF_tompus\SF_24-01-2014\011114-18891-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.18247.amd64fre.win7sp1_gdr.130828-1532
Machine Name:
Kernel base = 0xfffff800`0320b000 PsLoadedModuleList = 0xfffff800`0344e6d0
Debug session time: Sun Jan 12 02:24:40.453 2014 (UTC + 6:00)
System Uptime: 0 days 9:54:44.857
Loading Kernel Symbols
...............................................................
................................................................
.........................
Loading User Symbols
Loading unloaded module list
............
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 50, {fffff88007c0bd60, 0, fffff8000327fe5b, 0}


Could not read faulting driver name
Probably caused by : ntkrnlmp.exe ( nt!KiSystemServiceExit+0 )

Followup: MachineOwner
---------

Microsoft (R) Windows Debugger Version 6.2.9200.20512 X86
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\Usra\Downloads\SF_tompus\SF_24-01-2014\012414-17331-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.18247.amd64fre.win7sp1_gdr.130828-1532
Machine Name:
Kernel base = 0xfffff800`0325d000 PsLoadedModuleList = 0xfffff800`034a06d0
Debug session time: Sat Jan 25 00:33:40.275 2014 (UTC + 6:00)
System Uptime: 0 days 7:57:44.680
Loading Kernel Symbols
...............................................................
................................................................
........................
Loading User Symbols
Loading unloaded module list
........
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1A, {8886, fffffa8000d67ca0, fffffa8000581100, 205}

Probably caused by : memory_corruption ( nt!MiUnlinkPageFromLockedList+19c )

Followup: MachineOwner
---------
Start by taking Memtest.

Take memtest. Run for 8 passes and test each stick in a know good slot for an additional 6 passes.
RAM - Test with Memtest86+





Quote:
The goal is to test all the RAM sticks and all the motherboard slots.

Check your motherboard manual to ensure the RAM sticks are in the recommended motherboard slots. Some motherboards have very specific slots required for the number of RAM sticks installed.

If you get errors, stop the test and continue with the next step.

1. Remove all but one stick of RAM from your computer (this will be RAM stick #1), and run Memtest86 again, for 7 passes.*Be sure to note the RAM st... Read more

http://www.sevenforums.com/bsod-help-support/319584-bsod-ntoskrnl-exe-75bc0.html
Relevancy 86%

Greetings -

This computer runs a program named HAUPTWERK, which generates pipe organ sounds based on MIDI input. I leave this computer on all the time with the HAUPTWERK program running. Recently, the BSODs have started - usually overnight and always when no MIDI activity is happening and the computer should be idle. I don't know how to determine which driver is failing and would appreciate some guidance.

DRIVER_POWER_STATE_FAILURE
BUG CHECK: 0x0000009f
Parm 1 = 00000000`00000003
Parm 2 = fffffa80`0d506a10
Parm 3 = fffff800`0457d3d8
Parm 4 = fffffa80`10a61b10
Caused by driver: ntoskrnl.exe
Address = ntoskrnl.exe+75bc0
Microsoft Version: 6.1.7601.18247 (win7sp1_gdr.130828-1532)

Dell Optiplex 790
x64
BIOS: Dell A07, 9/10/11
Memory 16GB

Audio Devices
M-Audio Delta 1010LT
M-Audio FW 410 (this is the most recent device added, although it has been installed for a while before the BSOD started happening)

I have attached the output from the SF Diagnostic Tool
Thanks!
chuck

A:BSOD DRIVER_POWER_STATE_FAILURE ntoskrnl.exe+75bc0

Hi Chuck.

A stop 0x9F BSOD is caused by Advanced Configuration and Power Interface (ACPI), the power management options. Technically it is termed as DRIVER_POWER_STATE_FAILURE. That means, some driver is failing to act or response properly during the power transitions.

The failing drivers, as I am noticing are
mafw.sys, Service for M-Audio FireWire (c:\windows\system32\drivers\mafw.sys); a component of your M-Audio Delta 1010LT sound card.
iastor.sys, Intel AHCI Controller (c:\windows\system32\drivers\iastor.sys); Intel(R) Desktop/Workstation/Server Express Chipset SATA AHCI Controller.
Now let us think what should be done these these drivers.

For the M-Audio stuff, I am failing to suggest updates, as there is no feasible update as I am seeing in M-AUDIO - Drivers and Software Search.
Attachment 293933
In that situation, you should try removing that card.

Get rid of intel rapid storage. First uninstall it from Control Panel > Programs and Features. Then Uninstall the driver from device manager.
Right click on "my computer" icon and click "manage" on the context menu.
It will open the "computer management" window.
Select "Device Manager" in the left pane, It will list all the existing devices up.
Expand "IDE ATA/ATAPI controllers" by clicking on the triangle in front of it.
Select one Intel device item under it, right click, uninstall.
Continue the process for all Intel items under "IDE ATA/ATAPI controllers"
Now restart the computer. At restart, windows will auto configure the appropriate native system driver.
Alternatively, you may try one more thing .... as it is ACPI related ....

Code:
Device object (fffffa80101a8050) is for:
InfoMask field not found for _OBJECT_HEADER at fffffa80101a8020
\Driver\usbehci DriverObject fffffa80101879f0
Current Irp 00000000 RefCount 0 Type 00000004 Flags 00000040
DevExt fffffa80101a81a0 DevObjExt fffffa80101a9c00
ExtensionFlags (0x00000800) DOE_DEFAULT_SD_PRESENT
Characteristics (0x00000100) FILE_DEVICE_SECURE_OPEN
AttachedTo (Lower) fffffa800d4db8c0 \Driver\ACPI
Device queue is not busy.
Disable hibernate. Follow Hibernate - Enable or Disable. Disable sleep too. As it is a desktop computer, hibernate and sleep is not needed at all.

If the issues are still there even after disabling hibernate and sleep, remove the M-Audio sound card and uninstall Intel Rapid Storage.

Let us know the results.

http://www.sevenforums.com/bsod-help-support/311911-bsod-driver_power_state_failure-ntoskrnl-exe-75bc0.html
Relevancy 86%

This has come and gone for a long time. I ran a registry repair tool that seemed to fix it for about a month, but now it's back with a vengeance (4 BSODs today). Latest dump attached. Any help would be greatly appreciated.

A:BSOD DRIVER_POWER_STATE_FAILURE ntoskrnl.exe +75bc0

Welcome, please follow the Blue Screen of Death (BSOD) Posting Instructions .

What I can take from the dump file is it's caused due to an Asus utility.


Code:
BugCheck 9F, {3, fffffa8006eeb060, fffff80000b9c518, fffffa800644cb80}

Unable to load image \SystemRoot\system32\DRIVERS\AiCharger.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for AiCharger.sys
*** ERROR: Module load completed but symbols could not be loaded for AiCharger.sys
Probably caused by : usbhub.sys

Code:
FAILURE_BUCKET_ID: X64_0x9F_3_AiCharger_IMAGE_usbhub.sys

BUCKET_ID: X64_0x9F_3_AiCharger_IMAGE_usbhub.sys

Code:
!irp fffffa800644cb80

[ 16, 0] 0 0 fffffa8006eeb060 00000000 fffff8800115a890-fffffa8006ed51b0
\Driver\usbhub AiCharger
Args: 00000000 00000000 00000000 00000002
>[ 16, 2] 0 e1 fffffa8006ed5060 00000000 00000000-00000000 pending
\Driver\AiCharger
Args: 00041100 00000001 00000001 00000002
Not only is the driver very old it's also known to cause BSODs with Windows 7.


Code:
lmvm AiCharger
start end module name
fffff880`0115a000 fffff880`0115be80 AiCharger T (no symbols)
Loaded symbol image file: AiCharger.sys
Image path: \SystemRoot\system32\DRIVERS\AiCharger.sys
Image name: AiCharger.sys
Timestamp: Wed May 05 11:37:36 2010
Driver Reference Table - AiCharger.sys
Please remove any Asus Utility.

http://www.sevenforums.com/bsod-help-support/310214-bsod-driver_power_state_failure-ntoskrnl-exe-75bc0.html
Relevancy 86%

Hi all,

Last few days I'm experiencing BSOD.
After couple of days of browsing, searching, updating drivers etc. I find myself powerless.
Please, can anyone help?
Thank you in advance.
Jonci

A:BSOD DRIVER_POWER_STATE_FAILURE ntoskrnl.exe+75bc0

Hi jonci.

Yours a HP ProBook 4510s and it should have a webcam.





Quote:
Optional 2 MP webcam: Supports videoconferencing and still image capture
Improved quality for video streaming and still image capture (1600x1200 resolution)
Up to 30 frames/sec
Fixed focus lens
16-bit true color (camera sensor up to UXGA resolution)



Do you use any other webcam?

Can you disable your webcam, at least as a test?

After disabling the webcam, put the computer to sleep, then wake it up. Do it a few times.

Does it still BSOD while waking up? Let us know.
______________________________________

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa8005803620, fffff80004108518, fffffa800654e010}

Probably caused by : usbccgp.sys

Followup: MachineOwner
---------

http://www.sevenforums.com/bsod-help-support/332731-bsod-driver_power_state_failure-ntoskrnl-exe-75bc0.html
Relevancy 86%

So I made this thread Lots of programs quot have stopped working quot Also glitchy screen but after a week I JUST got a BSOD so I guess I would like some troubleshooting for this I think I'll copypaste what I posted in that thread quot An issue came up on my comp recently and it's the quot x program has stopped working ntoskrnl.exe+75bc0 help BSOD, please? and dxgkrnl.sys windows is trying to find a solution quot this happens randomly when I'm playing games like League dxgkrnl.sys and ntoskrnl.exe+75bc0 BSOD, help please? of Legends or Final Fantasy it even happens to Skype and most importantly sometimes it happens to Windows Explorer saying that quot Windows Explorer has stopped working and will now restart quot I don't know what is causing this and why some programs just decide to give me that error message Is it my graphics card Is it because I have malwarebytes and MSE I don't know I sent in my comp to my tech place to solve BSOD's and they returned it said it was working fine but it clearly isn't if these programs randomly give me the quot stopped working quot error I think we all know which error we're talking about right There's another thing and I think it's graphics card related sometimes I see little glitches on my screen randomly as if something was wrong with the computer like little color glitches maybe a little black bar in a random place or a quot glitchy quot color bar somewhere Is this because my graphics card is too old now for this CPU I have another graphics card which is gtx but it's sent in for repair because the cooler on it stopped working and should be returned next week Does anyone know how to fix my quot x program has stopped working quot problem Is it video card related Is there something on my computer that's causing it Maybe having antiviruses Is there malware on my computer or something dxgkrnl.sys and ntoskrnl.exe+75bc0 BSOD, help please? It gets really annoying Help would be very much appreciated I attached my dxdiag if that helps edit This is what the quot glitchy quot random screen I'm talking dxgkrnl.sys and ntoskrnl.exe+75bc0 BSOD, help please? about http puu sh bxEUW png that's part of a website and sometimes it gives me those bars ALSO I forgot to mention if I leave my computer on for too long white specs will cover my entire screen no matter if I'm gaming or just browsing tumblr facebook just imagine something like snow all over your screen I assume this is a video card thing So I have to restart sometimes and it fixes itself But my major problem is the programs that randomly quot stopped working quot An example of the quot stopped working quot error http puu sh bxFeC png just googled it I also get quot COM Surrogate has stopped working quot a lot too http puu sh bxFkH jpg and usually when I puu sh things it's an application that lets you take screenshots of your computer and upload it quickly or when I open up picture files quot I don't know what to do anymore Is it my video card It IS an old card but I've never had this problem before Or is something else conflicting with it Here is the complete bluescreenview screenshot http puu sh bxU png Also uploaded the attachment required Help would be very much appreciated I'm tired of this computer giving me problems

A:dxgkrnl.sys and ntoskrnl.exe+75bc0 BSOD, help please?

   Warning
4) No piracy or discussion of piracy allowed at all. Such as software, music, videos and other intellectual property violations (e.g. downloading youtube videos locally etc).


Your copy of windows is not genuine, Supports end here.

Counterfeit installations such as yours contain heavily modified code that causes the installation to behave it unexpected ways. Analyzing BSOD's and determining their causes on these sorts of installations is very unreliable. For this reason, many analysts won't attempt it.

My recommendation is to install a genuine Windows 7. This will minimize the problems you are experiencing, and make subsequent diagnosis of BSOD's far more reliable. Once you are running a genuine Windows 7 installation, and are still experiencing BSOD's, we will be happy to help you solve them.

http://www.sevenforums.com/bsod-help-support/345441-dxgkrnl-sys-ntoskrnl-exe-75bc0-bsod-help-please.html
Relevancy 86%

Hallo everyone,

I am experiencing again this
DRIVER_POWER_STATE_FAILURE
0x0000009f 00000000`00000003 fffffa80`073f0060 fffff800`00b9c3d8 fffffa80`06b8d540

ntoskrnl.exe+75bc0
6.1.7601.18247 (win7sp1_gdr.130828-1532)
My laptop is a Asus N56JR
where I forced the installation of Win7.
Attached the results of your SFD tool.

Regards

A:BSOD DRIVER_POWER_STATE_FAILURE ntoskrnl.exe+75bc0

You need not to enable driver verifier.

Upload your MSINFO32.nfo file, so that we can see a bit deeper.
Click on the start button
Type "msinfo32" (without quotes) in the search bar of the start menu, click the resulting link. It will open the System Information window.
File>Save. In the "File Name" filed, put "MSINFO32" (without Quote), give the save location to desktop, and click the "save" button.
Give the time for processing, it will save a .nfo file on your desktop.
Zip it, and upload it following the instruction.
________________________________________________

Code:
Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 0 fffffa800a6f0050 00000000 00000000-00000000
Unable to load image \SystemRoot\system32\DRIVERS\athrx.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for athrx.sys
*** ERROR: Module load completed but symbols could not be loaded for athrx.sys
\Driver\athr
Args: 00014400 00000000 00000004 00000002
[ 16, 2] 0 e1 fffffa800a727c70 00000000 fffff8000331d200-fffffa8007bfb890 Success Error Cancel pending
\Driver\vwifibus nt!PopSystemIrpCompletion
Args: 00014400 00000000 00000004 00000002
[ 0, 0] 0 0 00000000 00000000 00000000-fffffa8007bfb890

Args: 00000000 00000000 00000000 00000000

Code:
fffff880`08a22000 fffff880`08e28000 athrx T (no symbols)
Loaded symbol image file: athrx.sys
Image path: \SystemRoot\system32\DRIVERS\athrx.sys
Image name: athrx.sys
Timestamp: Mon Oct 21 16:17:28 2013 (52650640)
CheckSum: 003D866A
ImageSize: 00406000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

http://www.sevenforums.com/bsod-help-support/325375-bsod-driver_power_state_failure-ntoskrnl-exe-75bc0.html
Relevancy 86%

Been battling BSOD on and off randomly for a while, always ntoskrnl.exe+75bc0. Started after installing Alan Wake. Windows and all drivers up to date. Ran memtest, HDD Diag, System verication, stress tested system and a few other things with no luck.

A:Random BSOD ntoskrnl.exe+75bc0

Fuzz67,

These minidumps don't contain enough information to directly pinpoint the cause. But because the errors are calling Windows Hardware Error Architecture it's safe to assume that an uncorrectable error occurred somewhere in hardware.

http://www.sevenforums.com/bsod-help-support/324224-random-bsod-ntoskrnl-exe-75bc0.html
Relevancy 86%

Hi,

Good Day

Just got my HP ZBOOK 14 a month ago, since day one I am keep getting BSOB of

DRIVER_POWER_STATE_FAILURE
BUG CHECK: 0x0000009f
Parm 1 = 00000000`00000003
Parm 2 = fffffa80`0d506a10
Parm 3 = fffff800`00ba2748
Parm 4 = fffffa80`1df0ec10
Caused by driver: ntoskrnl.exe
Address = ntoskrnl.exe+75bc0
Microsoft Version: 6.1.7601.18247 (win7sp1_gdr.130828-1532)

HP Zbook 14 with i7-4600U
128Msata+ 500HDD
16g Ram
AMD Firepro M4100 FireGL V + Intel(R) HD Graphics Family ( Switch able graphic)

Attached with the output from the SF Diagnostic Tool

Much Appreciate for you guys help.

Thank You

A:BSOD DRIVER_POWER_STATE_FAILURE ntoskrnl.exe+75bc0

Hi swt123.

Uninstall NetLimiter. It causes BSODs wherever it is present.

Free up the startup. Windows does not need any other program to auto start with it, but the auto start programs often conflicts and causes various problems including BSODs.
Click on the Start button
Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the “Startup” tab.
Deselect all items other than the antivirus and the touchpad driver, SynTPEnh.
Apply > OK
Accept then restart.
Upload the list of all the third party drivers Using NirSoft DriverView :
Download and execute Driverview
View > Hide Microsoft Drivers
Edit > Select all
File > Save Selected Items
In the Save dialog, Set the path to desktop, Put "Driverview" in the name field, and save.
Zip the .txt file and upload it.
Let us know.

http://www.sevenforums.com/bsod-help-support/327171-bsod-driver_power_state_failure-ntoskrnl-exe-75bc0.html
Relevancy 85.14%

I get the same BSOD every time. Usually, almost exclusively when I shut the laptop and it is supposed to sleep. What happens is, it turns off. I have attached the BSOD file. I am guessing my power supply is running into problems. Tell me I am wrong.... please?

A:BSOD DRIVER_POWER_STATE_FAILURE crash at ntoskrnl.exe+75bc0

Welcome to SF ahalmay, please follow the Blue Screen of Death (BSOD) Posting Instructions .
All files are missing (part from three dumps), so I'm not getting the full picture.
Please follow the instructions detailed in the link above.

http://www.sevenforums.com/bsod-help-support/337625-bsod-driver_power_state_failure-crash-ntoskrnl-exe-75bc0.html
Relevancy 85.14%

Hi, I have a BSOD that I do not manage to solve.
It also seems to be linked to Kernel-Power 41 (63) critical error.

Below are the element you've aksed to provide.
Thanks in advance for your time and support.

Happy new years with tons of solutions...
Arnauld

? OS: Windows 7
? x64
? Original OS : 7
? OEM version (pre-installed on HP computer whn I bought it)
? 2011
? 2011
? Yes, DEC 2014

? CPU: i7, 870 @ 2.93 GHz (4 CPUs)
? Video Card: NVidia GTX 650
? MotherBoard: HP MS-7613 (Iona GL8E)
? Power Supply: original from HP...

? System Manufacturer : HP
? Exact model number: HPE-498d
. Desktop
HP Pavilion Elite HPE-498d Desktop PC Product Specifications | HP? Support

A:[SOLVED] BSOD - ntoskrnl.exe+75bc0 - IRQL_NOT_LESS_OR_EQUAL

Kernel-Power 41 simply means the PC was powered down manually either by the user unplugging the power or pushing the reset power button.

I ran 7 of the dumps all show being caused by NETIO.SYS which is a Windows networking driver, it appears to me it's calling for a stop because of interference from your Emsisoft Firewall program(fwwfp764.sys), try disabling it and using windows firewall.


Code:


Debug session time: Sat Jan 3 00:51:04.990 2015 (UTC - 5:00)
Loading Dump File [C:\Users\Owner\Bsodapps\SysnativeBSODApps\010315-23774-01.dmp]
Built by: 7601.18409.amd64fre.win7sp1_gdr.140303-2144
System Uptime: 0 days 0:02:24.911
*** ERROR: Module load completed but symbols could not be loaded for tcpip.sys
*** WARNING: Unable to verify timestamp for fwwfp764.sys
*** ERROR: Module load completed but symbols could not be loaded for fwwfp764.sys
Probably caused by : NETIO.SYS ( NETIO!WfpExpireEntryLru+17 )
BugCheck A, {0, 2, 1, fffff80002ecbc3f}
BugCheck Info: IRQL_NOT_LESS_OR_EQUAL (a)
Bugcheck code 0000000A
Arguments:
Arg1: 0000000000000000, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff80002ecbc3f, address which referenced memory
BUGCHECK_STR: 0xA
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0xA_NETIO!WfpExpireEntryLru+17
MaxSpeed: 2930
CurrentSpeed: 2926
BiosVersion = 6.14
BiosReleaseDate = 11/05/2010
SystemManufacturer = Hewlett-Packard
SystemProductName = HPE-498d
??????????????????????????????????????????????????????????????????????????????????????``
Debug session time: Sat Jan 3 00:46:32.258 2015 (UTC - 5:00)
Loading Dump File [C:\Users\Owner\Bsodapps\SysnativeBSODApps\010315-23556-01.dmp]
Built by: 7601.18409.amd64fre.win7sp1_gdr.140303-2144
System Uptime: 0 days 0:10:58.569
*** ERROR: Module load completed but symbols could not be loaded for tcpip.sys
*** WARNING: Unable to verify timestamp for fwwfp764.sys
*** ERROR: Module load completed but symbols could not be loaded for fwwfp764.sys
Probably caused by : NETIO.SYS ( NETIO!WfpExpireEntryLru+17 )
BugCheck A, {0, 2, 1, fffff80002e9bc3f}
BugCheck Info: IRQL_NOT_LESS_OR_EQUAL (a)
Bugcheck code 0000000A
Arguments:
Arg1: 0000000000000000, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff80002e9bc3f, address which referenced memory
BUGCHECK_STR: 0xA
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0xA_NETIO!WfpExpireEntryLru+17
MaxSpeed: 2930
CurrentSpeed: 2926
BiosVersion = 6.14
BiosReleaseDate = 11/05/2010
SystemManufacturer = Hewlett-Packard
SystemProductName = HPE-498d
??????????????????????????????????????????????????????????????????????????????????????``
Debug session time: Sat Jan 3 00:33:26.026 2015 (UTC - 5:00)
Loading Dump File [C:\Users\Owner\Bsodapps\SysnativeBSODApps\010315-24991-01.dmp]
Built by: 7601.18409.amd64fre.win7sp1_gdr.140303-2144
System Uptime: 0 days 13:17:57.947
*** ERROR: Module load completed but symbols could not be loaded for tcpip.sys
*** WARNING: Unable to verify timestamp for fwwfp764.sys
*** ERROR: Module load completed but symbols could not be loaded for fwwfp764.sys
Probably caused by : NETIO.SYS ( NETIO!WfpExpireEntryLru+17 )
BugCheck A, {0, 2, 1, fffff80002ed4c3f}
BugCheck Info: IRQL_NOT_LESS_OR_EQUAL (a)
Bugcheck code 0000000A
Arguments:
Arg1: 0000000000000000, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
A... Read more

http://www.techsupportforum.com/forums/f299/solved-bsod-ntoskrnl-exe-75bc0-irql_not_less_or_equal-940122.html
Relevancy 85.14%

I have some bluescreen issues. Whenever I'm doing something graphically intensive, I get lots of bands of color across the screen for a few seconds. Then I get a BSOD for a second. I used BlueScreenView to pull up three logs. I've attached those for anyone who has some free time to look at them.
 
I've run memstest for 4 passes and there were no errors. This leads me to believe that my problems stem from either a bad GPU or some kind of driver conflict.
 
Any help would be very much appreciated!
 

 bluescreen1.txt   2.05KB
  10 downloads

 bluescreen2.txt   2.05KB
  3 downloads

 bluescreen4.txt   2.06KB
  3 downloads

 bluescrren3.txt   2.06KB
  4 downloads

A:BSOD help! crash address - ntoskrnl.exe+75bc0

Since all four of these reports refer to system files, I would be inclined to run 'sfc /scannow' to repair any corrupted files. If you don't know how to do this :
 
Click on 'Start'; type 'cmd' into the search box (ALL typing without the quotes !); this may bring up a number of things but at the top will be 'cmd.exe'.
 
RIGHT click on this and choose 'Run as administrator'; then at the cursor type 'sfc /scannow' and press the 'Enter' key to start it running. Note that there is a space between 'sfc' and '/scannow'. Then let it run, it may take a while but let it finish. Then re-boot and try running something graphics intensive and see what happens.
 
Try the above, and if it works, great.  However your remarks 'graphically intensive' and 'bands of colour' suggest you may have either a graphics card problem or an over heating one. When you post back, if the problem isn't solved please give the make and model of your computer plus details on your graphics card.
 
Chris Cosgrove

http://www.bleepingcomputer.com/forums/t/543015/bsod-help-crash-address-ntoskrnlexe75bc0/
Relevancy 85.14%

This happened only recently, and as per title, totally random.
I dont have to be doing anything in particular, but it would just crash without any warning.

Please help, its getting really annoying :/

A:Random BSOD, ntoskrnl.exe+75bc0, BCCode 116

An old computer, and stop 0x116.

Is the computer hot? Report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy. Alternatively, you can publish a Speccy snapshot too: Speccy - Publish Snapshot of your System Specs .

Check if the Power Supply Unit (PSU) supplying adequate power to the computer or not.
eXtreme Power Supply Calculator
Also let us know the wattage of your PSU.

Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

Are you overclocking? As you are getting BSODs, you should stop overclocking and run all the hardware components like CPU, GPU and RAM to their default settings.

Install the NVIDIA DRIVERS 314.22WHQL only.
Uninstall All nvidia items in Control Panel > Programs and features3D Vision Control Driver
3D Vision Driver
Graphics Driver
HD Audio Driver
PhysX
nvidia Update
(Are you using nvidia chipset drivers? If so, dont uninstall anything other than those are listed).
Now follow Drivers - Clean Left over Files after Uninstalling
Download 314.22 WHQL. While installing, Select Custom (Advanced) install. In the next page, follow this settings:
Let us know the results.
________________________________________________________________________________________

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 116, {fffffa8009317010, fffff880055d66bc, ffffffffc000000d, 3}

Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+8ed6bc )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

VIDEO_TDR_FAILURE (116)
Attempt to reset the display driver and recover from timeout failed.
Arguments:
Arg1: fffffa8009317010, Optional pointer to internal TDR recovery context (TDR_RECOVERY_CONTEXT).
Arg2: fffff880055d66bc, The pointer into responsible device driver module (e.g. owner tag).
Arg3: ffffffffc000000d, Optional error code (NTSTATUS) of the last failed operation.
Arg4: 0000000000000003, Optional internal context dependent data.

Debugging Details:
------------------
FAULTING_IP:
nvlddmkm+8ed6bc
fffff880`055d66bc 4055 push rbp

DEFAULT_BUCKET_ID: GRAPHICS_DRIVER_TDR_FAULT

CUSTOMER_CRASH_COUNT: 1

BUGCHECK_STR: 0x116

PROCESS_NAME: System

CURRENT_IRQL: 0

STACK_TEXT:
fffff880`041ae9d8 fffff880`04723140 : 00000000`00000116 fffffa80`09317010 fffff880`055d66bc ffffffff`c000000d : nt!KeBugCheckEx
fffff880`041ae9e0 fffff880`046f6569 : fffff880`055d66bc fffffa80`06793000 00000000`00000000 fffffa80`06720410 : dxgkrnl!TdrBugcheckOnTimeout+0xec
fffff880`041aea20 fffff880`04722eed : fffffa80`09317010 fffffa80`09317010 fffffa80`09317010 fffffa80`06720410 : dxgkrnl!DXGADAPTER::PrepareToReset+0x109
fffff880`041aea60 fffff880`047c9f13 : fffffa80`09317010 00000000`00000000 fffffa80`067f9d50 fffffa80`06720410 : dxgkrnl!TdrIsRecoveryRequired+0x245
fffff880`041aea90 fffff880`047f7ed6 : fffffa80`ffffffff 00000000`01d9315f fffff880`041aebf0 00000000`00000002 : dxgmms1!VidSchiReport... Read more

http://www.sevenforums.com/bsod-help-support/315829-random-bsod-ntoskrnl-exe-75bc0-bccode-116-a.html
Relevancy 85.14%

Hi folks,

I'm a bit stumped on this error and was hoping some fine gents would have the time to look at this dump and see what might be causing my blue screens. It started in the last two weeks while I was playing SWTOR or HoN. There was no rhyme or reason when it happened, seems pretty random other than it happens while gaming. It's only happened about 5 times, but that seems consistent enough to make me worry.

Unfortunately I don't know what else has changed on my system other than installing Asus AI Suite and EVGA Precision for monitoring / fan control.

Please see the relevant dump files attached (Both seem different which is a bit odd... ).

I would appreciate any help.

Thank you, J

A:BSOD ntoskrnl.exe+75bc0 (0x0000003b) - While gaming

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1E, {0, 0, 0, 0}

*** WARNING: Unable to verify timestamp for btwdpan.sys
*** ERROR: Module load completed but symbols could not be loaded for btwdpan.sys
fffff880`07f68000 fffff880`07f84000 btwdpan T (no symbols)
Loaded symbol image file: btwdpan.sys
Image path: \SystemRoot\system32\DRIVERS\btwdpan.sys
Image name: btwdpan.sys
Timestamp: Tue May 17 00:28:06 2011 (4DD13B7E)
CheckSum: 000196E2
ImageSize: 0001C000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Issue seems to emanate from an old Broadcom blue tooth LAN driver. See if you can install an updated driver from here:
Ethernet NIC Driver Downloads | Broadcom

http://www.sevenforums.com/bsod-help-support/356627-bsod-ntoskrnl-exe-75bc0-0x0000003b-while-gaming.html
Relevancy 85.14%

My Lenovo IdeaPad Y which I bought last Fall has been having problems lately and when I brought it home from work this evening I've been unable to use it outside of safe mode without getting a BSOD I don't believe it's a memory problem because it runs in safe mode but I will run memcheck if someone here recommends it I've uploaded all the minidump files from today here - - dmp - Speedy Share shortly after ntoskrnl.exe+75bc0 startup, BSOD - upload your files here - - dmp - Speedy Share - upload BSOD shortly after startup, ntoskrnl.exe+75bc0 your files here - - dmp BSOD shortly after startup, ntoskrnl.exe+75bc0 - Speedy Share - upload your files here - - dmp - Speedy Share - upload your files here - - dmp - Speedy Share - upload your files here - - dmp - Speedy Share - upload your files here - - dmp - Speedy Share - upload your files here - - dmp - Speedy Share - upload your files here - - dmp - Speedy Share - upload your files here - - dmp - Speedy Share - upload your files here

A:BSOD shortly after startup, ntoskrnl.exe+75bc0

Additional information is required.

1. Download the DM Log Collector application to your desktop by clicking the link below

DM Log Collector.exe

2. Run it by double-clicking the icon on your desktop, and follow the prompts.
3. Locate the .ZIP file created on your desktop, and upload it here in your next reply.

http://www.sevenforums.com/bsod-help-support/327284-bsod-shortly-after-startup-ntoskrnl-exe-75bc0.html
Relevancy 85.14%

This has been happening quite a lot recently so i ran a whole bunch of diagnostic tests thinking maybe it was the ram but that turned up nothing, after viewing the crash reports in bluescreenview i determined it could possibly be a software issue so i did a fresh install of windows. It was going fine for a few months but now it has started again and is driving me nuts!! please help

much appreciated

Andrew

full reports attached

basic problem below:

BUG CHECK STRING: MEMORY_MANAGEMENT
BUG CHECK CODE: 0X0000001a
CAUSED BY DRIVER: ntoskrnl.exe
CAUSED BY ADDRESS: ntoskrnl.exe+75bc0

A:BSOD memory management, ntoskrnl.exe+75bc0

does ANYONE know ANYTHING about this??

http://www.sevenforums.com/bsod-help-support/320921-bsod-memory-management-ntoskrnl-exe-75bc0.html
Relevancy 85.14%

Greetings

My pc is having lots of BSOD for the past months.
The BluwScreenView shows that mostly the error has to do with ntoskrnl.exe+75bc0.

I tested my hdds and RAM (using MemTest) but there where no errors.

I am posting my report file, and I hope if you could resolve my problem.

Thank you in advance

A:Lots of BSOD caused by ntoskrnl.exe+75bc0

The crash dumps are almost the same.

Code:
BugCheck 109, {a3a039d8a4881742, b3b7465ef704e698, fffff800050213c8, 1}

*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : memory_corruption

Followup: memory_corruption
---------
Are you overclocking? As you are getting BSODs, you should stop overclocking and run all the hardware components like CPU, GPU and RAM to their default settings.

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Let us know the results.

http://www.sevenforums.com/bsod-help-support/324227-lots-bsod-caused-ntoskrnl-exe-75bc0.html
Relevancy 85.14%

Hi,

first at all, because of x109 BSOD I switched from Home Edition x64 to Ultimate x64. After a fresh install and after 1 day I'm already having new BSOD caused by ntoskrnl.exe+75bc0.

I have already:

1) Updated all the drivers through driver genius
2) Updated BIOS and Windows
3) Changed a suspect broken RAM (I have 2*4GB ram) - by memtest, anyway, no problem after 9 passes
4) Changed Antivirus (Avast, then AVG and now Windows Essential)

I attach the SF file, hoping you will help me to resolve this problem!!!

Thank you in advance

A:BSOD ntoskrnl.exe+75bc0 on Windows7 Ultimate x64

Code:
Nome host: BENDETTA-PC
Nome SO: Microsoft Windows 7 Ultimate
Versione SO: 6.1.7601 Service Pack 1 build 7601
Produttore SO: Microsoft Corporation
Configurazione SO: Workstation autonoma
Tipo build SO: Multiprocessor Free
Proprietario registrato: Bendetta
Organizzazione registrata:
Numero di serie: 00426-OEM-8992662-00006
Data di installazione originale: 12/01/2014, 02:34:45
Tempo di avvio sistema: 13/01/2014, 14:12:59
Produttore sistema: Gigabyte Technology Co., Ltd.
Modello sistema: Z68X-UD3H-B3
Uninstall this Windows 7 Ultimate ACER OEM, and reinstall Windows 7 Home Premium. Once you have activated and updated it fully, follow these steps and I'll analyse the dump files and see if we can find a solution:

1. Download this .BAT file to your desktop
2. Right-click and 'Run as Administrator'
3. Locate the .ZIP file on desktop and upload here.

http://www.sevenforums.com/bsod-help-support/318265-bsod-ntoskrnl-exe-75bc0-windows7-ultimate-x64.html
Relevancy 84.28%

I have had an ongoing issue on my PC with Memory Management.  I have tried updating the firmware on my BIOS,  I have disabled unneeded drivers and updated as many as I could find updates for.  I have popped and swapped my two 4GB memory modules.  I did download Memtest but I have not yet created the bootable cd to run it.  I have uninstalled Comodo AV and replace with MS Security Essentials.  AV and MalwareBytes scans are clean.  I have been running BlueScreenView but it only points to ntoskrnl.exe
 
0x0000001a
ntoskrnl.exe+75bc0
 
Any assistance in helping me narrow down the cause of my Bluescreen would be greatly appreciated. 
 
 

A:BSOD Memory Management - 0x0000001a ntoskrnl.exe+75bc0

Please download MiniToolBox  , save it to your desktop and run it.
 Checkmark the following checkboxes:  List last 10 Event Viewer log  List Installed Programs  List Users, Partitions and Memory size.
 Click Go and paste the content into your next post.
 Also...please Publish a Snapshot using Speccy - http://www.bleepingcomputer.com/forums/topic323892.html/page__p__1797792#entry1797792 , taking care to post the link of the snapshot in your next post.
 
Louis

http://www.bleepingcomputer.com/forums/t/536079/bsod-memory-management-0x0000001a-ntoskrnlexe75bc0/
Relevancy 84.28%

I had a computer but thought it was time for a new one, got a new cpu video card motherboard power supply ram, all of it.
When I switched my hard drive to new computer i was getting BSOD so i reset the hard drive and installed windows 7
Kept getting it so i bought a new hard drive and put windows 7 on it and im still getting it
Switched this hard drive to the old computer and it was all fine but when i switched it back to this it started happening again.
I'd love help!

A:Spent to much money for this BSOD crap ntoskrnl.exe+75bc0

Post it following the Blue Screen of Death (BSOD) Posting Instructions.

http://www.sevenforums.com/bsod-help-support/317332-spent-much-money-bsod-crap-ntoskrnl-exe-75bc0.html
Relevancy 84.28%

Ever since I bought this new computer months ago it's already been giving me problems with BSOD's and the tech company that constant these of Really random BSOD's tired ntoskrnl.exe+75bc0 sold it to me is literally useless to help me with this problem First of all I bought it with sticks of GB RAM totaling GB RAM but apparently the RAM sticks were corrupt or Really tired of these constant random BSOD's ntoskrnl.exe+75bc0 something tried exchanging them various times and the corrupt RAM gave me BSOD's when there were sticks in but it works fine with only stick of GB RAM The sticks are apparently conflicting with eachother and the tech company decided to give me stick of GB which I'll be recieving trading in Really tired of these constant random BSOD's ntoskrnl.exe+75bc0 for the GB's next week Moving on Really tired of these constant random BSOD's ntoskrnl.exe+75bc0 sometimes even with RAM stick I still get BSOD issues I have bluescreenview and eventually it all leads up to something called quot ntoskrnl exe bc quot I feel like they built my computer wrong or something But I also feel like it's an NVIDIA Graphics card issue Thing is I don't know what to do about it as I'm not knowledgeable with computers Back when I tried using this computer with sticks of GB RAM it worked except when I tried to run games like League of Legends it simply would just outright BSOD when I ran a game I also BSOD'd times while typing this thread after receiving today my computer back from the tech company who are basically like quot idk quot towards the whole situation If anyone knows what the problem is and what I could do to fix this help would be very much appreciated and I would be very graetful thank you

A:Really tired of these constant random BSOD's ntoskrnl.exe+75bc0

Hi Princey.

Yes, I agree that it is bad that the BSODs are occurring even with 1 RAM stick. But, multiple things are failing here, display and network.

Update the intel network driver from https://downloadcenter.intel.com/default.aspx.

Install the NVIDIA DRIVERS 314.22WHQL only.
Uninstall All nvidia items in Control Panel > Programs and features3D Vision Control Driver
3D Vision Driver
Graphics Driver
HD Audio Driver
PhysX
nvidia Update
(Are you using nvidia chipset drivers? If so, dont uninstall anything other than those are listed).
Now follow Drivers - Clean Left over Files after Uninstalling
Download 314.22 WHQL. While installing, Select Custom (Advanced) install. In the next page, follow this settings:
Also, test the RAM module for possible errors, too.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.
If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Let us know the results.

http://www.sevenforums.com/bsod-help-support/323368-really-tired-these-constant-random-bsods-ntoskrnl-exe-75bc0.html
Relevancy 84.28%

Hi all!

I've been fighting this random BSOD issue for a couple of months now, and am starting to get really frustrated with it.

I have included the various dumps as requested. I BELIEVE that it's related to the crappy Marvell RAID controller driver included on the mobo since I'm missing a disk in Windows (brand new.) But, I'm not experienced enough to debug this issue.

Could somebody take a look and help me troubleshoot this? Please let me know if you need anything else.

Thanks so much!

A:Random BSOD and System Shutdown, ntoskrnl.exe+75bc0

Welcome to the forum.

Please update these outdated drivers:

Perform a clean install of a driver following: How to Clean Left Over Driver Files with Driver Sweeper





Quote:
AppleCharger.sys Wed Nov 2 08:46:00 2011 (4EB0AEE8)
GIGABYTE On/Off Charge driver. See here for details - GIGABYTE ON/OFF Charge [br] May cause BSOD on Win7/8 systems - uninstall to test.
Driver Reference Table - AppleCharger.sys


akshhl.sys Fri Jul 20 15:30:59 2007 (46A080D3)
AksFridge driver (Aladdin security products)
Driver Reference Table - akshhl.sys

AKSCLASS.SYS Wed Nov 21 23:13:32 2007 (4744673C)
AksFridge driver (Aladdin security products)
Driver Reference Table - AKSCLASS.SYS

aksfridge.sys Thu Jan 8 13:59:54 2009 (4965B27A)
AksFridge driver (Aladdin security products)
Driver Reference Table - aksfridge.sys

aksusb.sys Wed Jan 28 21:02:53 2009 (4980739D)
AksFridge driver (Aladdin security products)
Driver Reference Table - aksusb.sys

hardlock.sys Mon Feb 2 21:34:08 2009 (49871270)
Hardlock Device Driver by Aladdin KnowledgeSystems
Driver Reference Table - hardlock.sys

akshasp.sys Mon Feb 2 21:47:42 2009 (4987159E)
AksFridge driver (Aladdin security products)
Driver Reference Table - akshasp.sys

mvxxmm.sys Thu Jan 19 12:50:44 2012 (4F17BD44)
Marvell Aux NV Bridge DLL - related to mv91xx SCSI HD Controller
Driver Reference Table - mvxxmm.sys

mvs91xx.sys Thu Jan 19 12:51:00 2012 (4F17BD54)
Marvell 91xx SATA Controller Driver
Driver Reference Table - mvs91xx.sys

If no updates are available, please remove the software with Revo Uninstaller Free.

Use Revo Uninstaller to uninstall stubborn software. Opt for Advance Mode while uninstalling which allows leftover registry removal:Download Revo Uninstaller Freeware - Free and Full Download - Uninstall software, remove programs, solve uninstall problems

Reduce items at start-up: Startup Programs - Change

Perform a clean boot: Troubleshoot Application Conflicts by Performing a Clean Startup

Trend Micro software tends to cause BSOD's. Please remove it for testing purpose. Use Microsoft Security Essentials.

Recommended from a strict BSOD perspective, compatibility & stability compared to other security software:

Microsoft Security Essentials - Free Antivirus for Windows

Malwarebytes - Free

Good and Free system security combination.

Do not start the free trial of Malware Bytes; remember to deselect that option when prompted.

Scan with Kaspersky TDSSKiller:Anti-rootkit utility TDSSKiller

ESET online scanner: Free Online Virus Scanner | ESET

Run Disk Check on your Hard Drive(s): Disk Check

Run a System file check (SFC): SFC /SCANNOW Command - System File Checker

Check for heating issues using Speccy or HWmonitor

Upload a screen shot: Screenshots and Files - Upload and Post in Seven Forums

Keep us posted. Good luck.

Bugcheck Summary:

Code:
Debug session time: Fri Dec 6 22:52:46.639 2013 (UTC + 6:00)
Built by: 7601.18247.amd64fre.win7sp1_gdr.130828-1532
System Uptime: 0 days 0:41:33.857
Probably caused by : pci.sys
BugCheck 9F, {3, fffffa800c933a10, fffff800048de3d8, fffffa8012222c60}
BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)
Bugcheck code 0000009F
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: fffffa800c933a10, Physical Device Object of the stack
Arg3: fffff800048de3d8, nt!TRIAGE_9F_POWER on Win7, otherwise the Functional Device Object of the stack
Arg4: fffffa8012222c60, The blocked IRP
BUGCHECK_STR: 0x9F
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0x9F_3_mvs91xx_IMAGE_pci.sys
??????????????????????????????????????????????????????????????????????????????????????``
Debug session time: Fri Dec 6 07:11:56.706 2013 (UTC + 6:00)
Built by: 7601.18247.amd64fre.win7sp1_gdr.130828-1532
System Uptime: 0 days 0:51:03.908
Probably caused by : pci... Read more

http://www.sevenforums.com/bsod-help-support/314222-random-bsod-system-shutdown-ntoskrnl-exe-75bc0.html
Relevancy 84.28%

This is a fresh build made with a combination of new and older parts. Over the past week, It's crashed 5 times, under varying loads. I'm guessing it's a hardware issue, but I'm no expert. Please help me fix this issue.
 
Below is a Speccy screenshot.
 
Attatches are a MiniToolBox log of the last 10 Event Viewer Events, Devices, Users/Partitions/Memory size and Minidump files, as well as a zip folder of my minidump files.
 
Thank you all in advance.
 
Speccy:
 
http://speccy.piriform.com/results/edcqZjOt6zAMXJSB4hz6NbC

A:Seemingly random BSOD caused by ntoskrnl.exe+75bc0.

I don't know how other's feel about this, but as a practice I will not download anything to my computer unless I know exactly what the content is.
 
Once the MiniTooBox scan is finished you can copy and then paste the results in your topic.  You can do the same with the minidumps.  I would post these separately, ex. post #3 minitoolbox, post #4 minidumps.
 
The Speccy is showing the 12V rail to be 8.064V.  I suspect this isn't accurate, but it would be worth putting a meter on it to be sure.  If it is accurate, then your PSU has a problem.
 
Voltages:
 
+3.3V    2.004V
+5V       3.367V
+12V     8.064V
 
If you have a multimeter with a DC Volt scale you can use the instructions below to read the rail voltages.
 
 
Reading Desktop PSU Rail Voltages
 
Caution: Please read this before continuing.
 
 

 Since it will be necessary for your computer to be on during this procedure, you need to be aware that you will be working with live 12Volt DC potentials, which if handled improperly may lead to electrical shock. 

 

There are electronics inside the case that are very susceptible to electrostatic discharges. To protect your computer, touch the metal of the case to discharge yourself of any electrostatic charges before touching any of the components inside.

 

If you are not comfortable doing this procedure, then I would suggest that you not use this tutorial. The risks involved are minimal, but are there nevertheless. Anyone who uses this tutorial will be doing so at their own risk.

 
 
There are two devices commonly used to read the rail voltages: a PSU tester, and a multimeter. 
 
The PSU tester is the easiest to use since all that is necessary is to plug the different connectors into the tester and read the results on the LCD display. The problem with most of these is that they only perform a pass/fail test.  They will not provide you with actual voltage readings.
 
There are a variety of multiple meters, but this tutorial will address Analog and Digital multimeters. The advantage of these meters is that you will be able to obtain accurate real time voltage readings.
 
For those of you who wish to know more about multimeters there is an excellent article in Wikipedia.
 
 
Analog Multimeter
 

 
 
An Analog multimeter is a little more complicated to use. Both Analog and Digital multimeters need to be set to the appropriate voltage, but with an Analog multimeter, you will need to choose the voltage range and must read the proper scale. 
 
The Analog multimeter uses a needle display which moves from 0 across the scale until it reaches the voltage being tested. This multimeter has five major linear divisions with multiple scales to read a variety of ranges. An example would be three different ranges. The first is graduated in increments of 0 through 5, the second, 0 through 10, and the third, 0 through 25. Each of these ranges are subdivided into divisions that are graduated into tenths. In order to read 12 volts the 0 through 25 range would be the appropriate one. 
 
Because DC voltage has positive and negative potentials this device is polar sensitive, this means that if you reverse the two probes when reading a positive DC voltage it will read as a negative voltage. This is actually necessary to read negative DC voltages. The two probes are differentiated by their color, Black (negative), and Red (positive). To read a positive DC voltage, the correct probes must be used with their corresponding potentials (positive to positive and negative to negative). 
 
With the probes being used normally to read a negative DC voltage, the needle moves from the 0 to the left, "pegging" the needle. By reversing the probes you can properly read the negative voltages.
 
Digital Multimeter
 

 
 
The Digital multim... Read more

http://www.bleepingcomputer.com/forums/t/517282/seemingly-random-bsod-caused-by-ntoskrnlexe75bc0/
Relevancy 83.42%

Hello,

This morning when i woke up when i switched my pc's monitor i got those beloved letters.My computer was on idle,probably it fell asleep.The settings on power options were on Balanced mode.Pc is on stock clocks.No overclock made.
Heres the minidump file.
Notice: this happened a couple of days once i updated lots of windows updates.

A:BSOD - Driver power state failure - ntoskrnl.exe+75bc0

Welcome to the Forum.

AVG is contributing to your BSOD. Please remove it for testing purpose. Use Microsoft Security Essentials.

Recommended from a strict BSOD perspective, compatibility & stability compared to other security software:

Microsoft Security Essentials - Free Antivirus for Windows

Malwarebytes - Free

Good and Free system security combination.

Reduce items at start-up: Startup Programs - Change

Perform a clean boot: Troubleshoot Application Conflicts by Performing a Clean Startup

Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable!:-

Rt64win7.sys Thu Feb 26 15:04:13 2009 (49A65B0D)
Realtek RTL8168D/8111D Family PCI-E Gigabit Ethernet NIC
Driver Reference Table - Rt64win7.sys

Perform a clean install of a driver following: How to Clean Left Over Driver Files with Driver Sweeper

Use Revo Uninstaller to uninstall stubborn software. Opt for Advance Mode while uninstalling which allows leftover registry removal:Download Revo Uninstaller Freeware - Free and Full Download - Uninstall software, remove programs, solve uninstall problems

Scan with Kaspersky TDSSKiller:Anti-rootkit utility TDSSKiller

ESET online scanner: Free Online Virus Scanner | ESET

Run a System file check (SFC): SFC /SCANNOW Command - System File Checker

Run Disk Check on your Hard Drive(s): Disk Check

Check for heating issues using Speccy or HWmonitor

Upload a screen shot: Screenshots and Files - Upload and Post in Seven Forums


Code:
Built by: 7601.18247.amd64fre.win7sp1_gdr.130828-1532
Debug session time: Wed Feb 12 12:52:40.509 2014 (UTC + 6:00)
System Uptime: 1 days 6:05:36.431
BugCheck 9F, {3, fffffa800b1aeab0, fffff80000b9c518, fffffa800cf99e10}
*** WARNING: Unable to verify timestamp for atikmpag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmpag.sys
Probably caused by : atikmpag.sys
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
??????????????????????????????????????????????????????????????????????????????????????``

http://www.sevenforums.com/bsod-help-support/321780-bsod-driver-power-state-failure-ntoskrnl-exe-75bc0.html
Relevancy 83.42%

hello IT pros unfortunately i get a BSOD from time to time on my laptop the error s turn up randomly sometimes when i'm not even 0x0000000a random BSOD ntoskrnl.exe+75bc0 [SOLVED] IRQL_NOT_LESS_OR_EQUAL around or just browsing the web i have this problem since i installed windows so there is no other [SOLVED] random BSOD IRQL_NOT_LESS_OR_EQUAL 0x0000000a ntoskrnl.exe+75bc0 older working restore point harddrive seems fine chkdsk gave no errors also i tried different drivers no luck so far also there is [SOLVED] random BSOD IRQL_NOT_LESS_OR_EQUAL 0x0000000a ntoskrnl.exe+75bc0 no newer BIOS OS - Windows x -bit or x x What was the original installed OS on sthe ystem Windows Is the OS an OEM version i purchased it from retailer Approximate age of system less than year old laptop os installed months ago Have you re-installed the OS yes CPU Intel i - M Video Card Intel HD MotherBoard Acer Aspire E - System Manufacturer Acer Exact model number Aspire E - SysnativeBSODCollectionApp exe stops working here after quot Autoruns D O N E quot it's coming up with quot Waiting for SystemInfo quot every secs forever i tried twice with the same result So i zipped manually what was done so far any help is highly appreciated thanks in advance thomas

A:[SOLVED] random BSOD IRQL_NOT_LESS_OR_EQUAL 0x0000000a ntoskrnl.exe+75bc0

Hi,

IRQL_NOT_LESS_OR_EQUAL (a)

This indicates that Microsoft Windows or a kernel-mode driver accessed paged memory at DISPATCH_LEVEL or above.


Code:

1: kd> .trap 0xfffff880089cd8c0
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000002 rbx=0000000000000000 rcx=fffff88002f00180
rdx=fffffa800b072fe0 rsi=0000000000000000 rdi=0000000000000000
rip=fffff800032dbe52 rsp=fffff880089cda50 rbp=0000000000000000
r8=0000000000000000 r9=fffffa8009d9bc40 r10=fffffa8009d9bc40
r11=fffff880089cdae0 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei pl nz ac po cy
nt!KiSignalSynchronizationObject+0x42:
fffff800`032dbe52 488b3f mov rdi,qword ptr [rdi] ds:00000000`00000000=????????????????
Failure moving the contents of the rdi register into rdi, this makes no sense of course.

1. In your loaded drivers list, dtsoftbus01.sys is listed which is the Daemon Tools driver. Daemon Tools is a very popular cause of BSOD's in 7/8 based systems. Please uninstall Daemon Tools. Alternative imaging programs are: MagicISO, Power ISO, etc.

2. Uninstall KProcessHacker as it's likely conflicting with TrueCrypt.

3.


Code:

1: kd> lmvm auuzplzn
start end module name
fffff880`085ad000 fffff880`085fe000 auuzplzn (deferred)
Image path: auuzplzn.SYS
Image name: auuzplzn.SYS
Timestamp: Tue Sep 10 09:56:12 2013
No idea what this driver is, and there's no documentation regarding it. Run a Malwarebytes free scan:

https://www.malwarebytes.org/

Regards,

Patrick

http://www.techsupportforum.com/forums/f299/solved-random-bsod-irql_not_less_or_equal-0x0000000a-ntoskrnl-exe-75bc0-905114.html
Relevancy 83.42%

Hello all I am looking for help in debugging two issues which I have been getting for the past week I have the system Power Management set up to put the system to Sleep but when it goes to sleep I get a BSOD and the system shut downs When I try to shut down the system via Windows the Shut Down screen appears but the loading icon keeps running and the system never actually shuts down The BSOD Bug Check Code is x f and the Caused by Address is ntoskrnl exe bc I do not get these issues on ntoskrnl.exe+75bc0 ends never on for mode and Sleep Shutdown BSOD a Clean Boot so from what I have read I am guessing it is driver related but I am too novice to determine which driver it is I ran Windows Update and updated a bunch of the other equipment drivers but it hasn't helped Note I did install a new ASUS RT-AC U router and a HP Photosmart printer over the holidays but this issue did not appear right away after the install Diagnostics zip file attached Thanks in advance for any help -Rob

A:BSOD on Sleep mode for ntoskrnl.exe+75bc0 and Shutdown never ends

Hi Zarathud.

HP Photosmart 7520 series - Remove it from Startup.

And, Disable USB Selective Suspense too.
USB Selective Suspend - Turn On or Off

Uninstall MCAfee Security Scan Plus.

Also search in Dell using your service tag .... if there is any Chipset and BIOS update for your model.

Let us know how the computer is running.
_______________________________________________________________________________________

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa8011908a00, fffff80004b2f518, fffffa800bf2c9e0}

Probably caused by : usbccgp.sys

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

DRIVER_POWER_STATE_FAILURE (9f)
A driver is causing an inconsistent power state.
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: fffffa8011908a00, Physical Device Object of the stack
Arg3: fffff80004b2f518, Functional Device Object of the stack
Arg4: fffffa800bf2c9e0, The blocked IRP

Debugging Details:
------------------
DRVPOWERSTATE_SUBCODE: 3

IMAGE_NAME: usbccgp.sys

DEBUG_FLR_IMAGE_TIMESTAMP: 52272385

MODULE_NAME: usbccgp

FAULTING_MODULE: fffff88004e75000 usbccgp

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

BUGCHECK_STR: 0x9F

PROCESS_NAME: System

CURRENT_IRQL: 2

STACK_TEXT:
fffff800`04b2f4c8 fffff800`035318d2 : 00000000`0000009f 00000000`00000003 fffffa80`11908a00 fffff800`04b2f518 : nt!KeBugCheckEx
fffff800`04b2f4d0 fffff800`034cc85c : fffff800`04b2f600 fffff800`04b2f600 00000000`00000000 00000000`00000002 : nt! ?? ::FNODOBFM::`string'+0x33af0
fffff800`04b2f570 fffff800`034cc6f6 : fffffa80`13e73580 00000000`004264fb 00000000`00000000 00000000`00000000 : nt!KiProcessTimerDpcTable+0x6c
fffff800`04b2f5e0 fffff800`034cc5de : 0000009e`0b61c437 fffff800`04b2fc58 00000000`004264fb fffff800`036411e8 : nt!KiProcessExpiredTimerList+0xc6
fffff800`04b2fc30 fffff800`034cc3c7 : 00000029`0e0babc2 00000029`004264fb 00000029`0e0bab18 00000000`000000fb : nt!KiTimerExpiration+0x1be
fffff800`04b2fcd0 fffff800`034b98ca : fffff800`0363ce80 fffff800`0364acc0 00000000`00000001 fffff880`00000000 : nt!KiRetireDpcList+0x277
fffff800`04b2fd80 00000000`00000000 : fffff800`04b30000 fffff800`04b2a000 fffff800`04b2fd40 00000000`00000000 : nt!KiIdleLoop+0x5a
STACK_COMMAND: kb

FOLLOWUP_NAME: MachineOwner

FAILURE_BUCKET_ID: X64_0x9F_3_usbscan_IMAGE_usbccgp.sys

BUCKET_ID: X64_0x9F_3_usbscan_IMAGE_usbccgp.sys

Followup: MachineOwner
---------

0: kd> !irp fffffa800bf2c9e0
Irp is active with 8 stacks 6 is current (= 0xfffffa800bf2cc18)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 0000... Read more

http://www.sevenforums.com/bsod-help-support/318059-bsod-sleep-mode-ntoskrnl-exe-75bc0-shutdown-never-ends.html
Relevancy 83.42%

Hello I area in 0x00000050 ntoskrnl.exe+75bc0 BSOD nonpaged pagefault have a new user built PC with fresh install of windows home premium bit I have the bare minimum of programs installed such as Adobe BSOD pagefault in nonpaged area 0x00000050 ntoskrnl.exe+75bc0 Reader XI Panda Free Antivirus Google Chrome and HDHomerun I also have two external hard drives with data media In addition to receiving BSOD about once or twice per day often while the PC is idle I have also noticed Windows Media Center is disconnecting from my xbox extender after a few minutes Not sure if that is a separate issue or not Windows is fully updated with automatic updates turned on Most drivers were from motherboard support disc and most are updated All firmware is updated I believe Memtest passes times overnight with zero errors Seatools and dskchk show no hard drive errors i tested them all Furmark and Intel Burn test were run for about minutes with no crashes artifacts or lockups I replaced the power supply for good measure--no changes I'm really at a loss--I feel I've tested all hardware sufficiently but if I'm missing something please help I'm thinking it's a software issue conflict but I'm almost bare bones so can't figure out what Thanks for lending your expertise to my problem I appreciate any assistance you can offer Thanks Tim System i - k stock ASUS z pro XFX r x DD stock x gb G Skill ripjaws x ddr - Samsung SSD evo gb OS programs Antec trio PS

A:BSOD pagefault in nonpaged area 0x00000050 ntoskrnl.exe+75bc0

One other odd thing I have noticed multiple times. I have the monitor set to sleep after 10 minutes, and the computer is set to never sleep. I've found the monitor off after I've been AFK for a while (as it should be after 10 minutes), and when I return and move the mouse or hit the keyboard, the monitor doesn't power on. The mouse light is on, the case power light is on and I hear fans, the disc drives open, etc., but no signal to monitor. Toggling the power on the monitor does nothing. Also, the sleep button on the keyboard does not put the PC to sleep as usual. So it's like it's frozen, but in a way it isn't? This doesn't happen every time, but occasionally.

http://www.sevenforums.com/bsod-help-support/354780-bsod-pagefault-nonpaged-area-0x00000050-ntoskrnl-exe-75bc0.html
Relevancy 82.56%

I bought my computer last year Custom build Everything was working fine until January th this year I experienced my first BSOD on this machine I've tried rolling back graphics drivers which were the only ones BSOD Sparse Win7-64bit (hal.dll+12a3b, 0x00000124 ntoskrnl.exe+75bc0) I had installed recently and it didn't help because days later the same BSOD happened The next BSOD didn't happen for another month And recently this is my th one that I am attaching in the log compilation The other dmp's were Sparse BSOD 0x00000124 (hal.dll+12a3b, ntoskrnl.exe+75bc0) Win7-64bit erased by me Sparse BSOD 0x00000124 (hal.dll+12a3b, ntoskrnl.exe+75bc0) Win7-64bit by accident but they all said the same thing when I opened them in BlueScreenView I will try reseating hardware and more stress tests when I have time but I'm really lost here as its such a sparse occurrence that it makes it really hard for me to test in a reasonable amount of time I'm hoping someone here can see what my inexperienced eyes are missing Here's what I do know - I didn't install any drivers for a while month or so other than the nvidia driver which I rolled back - I am not overclocking and just running stock and default BIOS Though since my rd BSOD I have turned on XMP for my RAM didn't make anything worse I guess - The BSOD happens very randomly Twice while I was playing fairly low resource demanding games Once while I was just on desktop dragging organizing files And most recently Sparse BSOD 0x00000124 (hal.dll+12a3b, ntoskrnl.exe+75bc0) Win7-64bit while browsing Twitch tv on Chrome There seems to be nothing in common which is really frustrating - It doesn't seem to be related to how long my computer has been running The most recent happened minutes after turning my computer on - I have a minor suspicion it could be my sound because it's always given me issues distorting not being detected randomly at startup But it is onboard and I have no idea how to begin testing it I will post updates as I perform further tests will be running memtest thru the night last time only ran for hours Please let me know any good suggestions Thanks a lot

A:Sparse BSOD 0x00000124 (hal.dll+12a3b, ntoskrnl.exe+75bc0) Win7-64bit

I apologize ahead of time for losing the other 3 memory dumps, though they all appeared the same I'm sure there was useful information in there. I deleted them by accident via diskcleanup utility. I will post memory dmps as they happen in this thread, but for now if anyone sees a potential problem or has any advice to test please let me know.

http://www.sevenforums.com/bsod-help-support/328551-sparse-bsod-0x00000124-hal-dll-12a3b-ntoskrnl-exe-75bc0-win7-64bit.html
Relevancy 75.68%

Hello.
 
I'm running Windows 10, and before that had been running 8.1. In both OS versions, I have gotten mutilple BSODs, specifically: KMODE_EXCEPTION_NOT_HANDLED, BAD_POOL_HEADER, SYSTEM_SERVICE_EXCEPTION, and MEMORY_MANAGEMENT.
 
BlueScreenView says a file named "ntoskrnl.exe" is to blame every time.
 
I ran Memtest on 8.1 and got no errors. I'm afraid of running Driver Verifier because if I get locked out of my computer because of a VERIFIER_ENABLED BSOD, I'm not sure how I would get back in (I can't boot to safe mode using F8).
 
Any help getting rid of these blue screens would be very much appreciated.
 
I can't upload the .dmp files directly ("you aren't permitted to upload this kind of file"), but I can put them on MEGA, so here is the link: https://mega.nz/#F!6xJ0UbxJ!xhQ53lTwgXQdXh6AkwQ9XA

A:"ntoskrnl.exe" causing multiple BSODs

Sorry for the delay in responding.In most cases, the reason that you can't upload the dump files is that they haven't been zipped up.  The forums only allow certain kinds of files to be uploaded, and .zip is the one that's used the most by us. There's a different way to get to Safe Mode in Win8/10.  But don't worry about it now - we'll discuss it if it's needed. Please provide this information so we can provide a complete analysis (from the Pinned Topic at the top of the forum):  http://www.bleepingcomputer.com/forums/t/576314/blue-screen-of-death-bsod-posting-instructions-windows-10-81-8-7-vista/Out of 8 memory dumps there were 5 different BSOD  (aka STOP or BugCheck) error codes.  The differing error codes are usually symptomatic of a lower level problem within the system. They are usually caused by one of these things (the list is not in any sort of order):- borked (broken) hardware (several different procedures used to isolate the problem device)- BIOS issues (check for updates at the motherboard manufacturer's website)- overclocking/overheating - You'll know if you're overclocking or not. If uncertain we can suggest things to check.- dirt/dust/hair/fur/crud inside the case.  Blow out the case/vents with canned air (DO NOT use an air compressor or vacuum as they can cause damage to the system)- missing Windows Updates- compatibility issues (3rd party hardware/drivers), older systems, or even pirated systems- low-level driver problems- or even malware (scanned for when we ask for hardware diagnostics from http://www.carrona.org/initdiag.html or http://www.carrona.org/hwdiag.html ).Please get a head start on the hardware diagnostics - they are located here:  http://www.carrona.org/hwdiag.htmlYour UEFI/BIOS (version F1) dates from 2014.  Please check at the manufacturer's website to see if there are any UEFI/BIOS updates available for your system.  If you are able to install the update through Windows (without booting from an external drive), then go ahead and update it.  WARNING - if the computer might shut down during this procedure, please don't do it, as this may physically damage the computer and prevent it from booting.MalwareBytes may be conflicting with your Avast.  Please uninstall it for now (for testing purposes)Should you decide to reinstall it, DO NOT consent to the trial of the Pro version - as that's the component that starts with Windows and may be conflicting. Logitech drivers date from 2012 and may not be compatible w/Win10.  Please uninstall the Logitech device and its software.  Then, if you want to continue using it, download and install the latest, Win10 compatible software from Logitech. Analysis:The following is for informational purposes only.[font=lucida console]**************************Thu Aug 13 19:11:37.786 2015 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\081315-7656-01.dmp]
Windows 8 Kernel Version 10240 MP (4 procs) Free x64
Built by: [B]1024[/B]0.16430.amd64fre.th1.150807-2049
System Uptime:[B]0 days 20:53:09.457[/B]
Probably caused by :[B]memory_corruption ( ONE_BIT )[/B]
BugCheck [B]1A, {41792, fffff680002d14b8, 40000000000000, 0}[/B]
BugCheck Info: [url=http://www.carrona.org/bsodindx.html#0x0000001A]MEMORY_MANAGEMENT (1a)[/url]
Arguments:
Arg1: 0000000000041792, A corrupt PTE has been detected. Parameter 2 contains the address of
    the PTE. Parameters 3/4 contain the low/high parts of the PTE.
Arg2: fffff680002d14b8
Arg3: 0040000000000000
Arg4: 0000000000000000
BUGCHECK_STR:  0x1a_41792
PROCESS_NAME:  Bioshock2.exe
FAILURE_BUCKET_ID: [B]MEMORY_CORRUPTION_ONE_BIT[/B]
CPUID:        "Intel(R) Core(TM) i5-4440 CPU @ 3.10GHz"
MaxSpeed:     3100
CurrentSpee... Read more

http://www.bleepingcomputer.com/forums/t/586258/ntoskrnlexe-causing-multiple-bsods/
Relevancy 75.68%

So out of nowhere last help! causing multiple BSODs, ntoskrnl.exe please night my PC suddenly BSOD'd suddenly while just browsing things ntoskrnl.exe causing multiple BSODs, please help! It's never had any issues it's about a year old now It happened again at some point overnight as I woke up to ntoskrnl.exe causing multiple BSODs, please help! the login screen and it telling me it recovered from a blue screen Then it happened once more today about hours ago during a League of Legends Dominion match My girlfriend suggested from what little I knew that I update my graphics drivers which I did and rebooted Still if I could get anything more concrete it'd really help The last error that popped up was Quote Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode c BCP BCP BCP BCP FFFFFA D CDD OS Version Service Pack Product I'm using an HP Pavilion Elite HPE with an i - processor GB of RAM and a Radeon graphics card I ran a monitoring program and the core temperatures were around - C while idling and the graphics card never got above C so it doesn't look like it's overheating I'm including the minidumps hopefully someone can help point me in the right direction here

A:ntoskrnl.exe causing multiple BSODs, please help!

  
Quote: Originally Posted by AvalonBright


So, out of nowhere last night, my PC suddenly BSOD'd suddenly while just browsing things. It's never had any issues, it's about a year old now. It happened again at some point overnight as I woke up to the login screen and it telling me it recovered from a blue screen. Then, it happened once more today about 2 hours ago during a League of Legends Dominion match.

My girlfriend suggested from what little I knew that I update my graphics drivers, which I did and rebooted. Still, if I could get anything more concrete it'd really help.

The last error that popped up was






Quote:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: c2
BCP1: 0000000000000007
BCP2: 0000000000001097
BCP3: 0000000009060001
BCP4: FFFFFA8007D8CDD0
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1.


I'm using an HP Pavilion Elite HPE, with an i7-480 processor, 8GB of RAM, and a Radeon 5770 graphics card. I ran a monitoring program and the core temperatures were around 55-68 C while idling, and the graphics card never got above 57 C, so it doesn't look like it's overheating. I'm including the minidumps, hopefully someone can help point me in the right direction here.



Two issues
1-Please remove any CD visualization programs such as Daemon Tools and Alcohol 120%.

They use a driver, found in your dmp, called sptd.sys, that is notorious for causing BSODs.

Use this SPTD uninstaller DuplexSecure - Downloads DuplexSecure - FAQ

when you're done you can use this Freeware MagicISO Virtual CD/DVD-ROM(MagicDisc) in its place.
2-Memory exception

These crashes were caused by a memory exception. Please run these two tests to verify your memory and find which driver is causing the problem.
*-Memtest.

*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

RAM - Test with Memtest86+

*-Driver verifier






Quote:
I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If y... Read more

http://www.sevenforums.com/bsod-help-support/195328-ntoskrnl-exe-causing-multiple-bsods-please-help.html
Relevancy 73.1%

Hello,

Just had second BSOD in two weeks. Never had anything like that before (I work on my laptop for three years now).

BlueScreenView suggests ntoskrnl.exe+75bc0 driver problem.

Please find attached the SF tool output.

Please help.

Thank you and best regards,
Valerik

A:ntoskrnl.exe+75bc0

Welcome to the Forum.

Please update these drivers:


Code:
SMIEXP.SYS Wed Jan 16 16:06:19 2008 (478DD71B)
Lenovo EasyCamera
Driver Reference Table - SMIEXP.SYS


Code:
WDMirror.sys Tue Jun 17 12:37:30 2008 (48575BAA)
May be Lenovo RMCT Display Driver
Driver Reference Table - WDMirror.sys


Code:
NETw5s64.sys Wed Jan 13 22:37:13 2010 (4B4DF6B9)
Intel 5100 wifi
Driver Reference Table - NETw5s64.sys

Perform a clean install of a driver following: How to Clean Left Over Driver Files with Driver Sweeper

Reduce items at start-up: Startup Programs - Change

Perform a clean boot: Troubleshoot Application Conflicts by Performing a Clean Startup

Scan with Kaspersky TDSSKiller: Anti-rootkit utility TDSSKiller &

ESET online scanner: Free Online Virus Scanner | ESET

Run Disk Check on your Hard Drive(s): Disk Check

Run a System file check (SFC): SFC /SCANNOW Command - System File Checker

Let us know the results.

http://www.sevenforums.com/bsod-help-support/313187-ntoskrnl-exe-75bc0.html
Relevancy 72.24%

I came to ntoskrnl.exe+75bc0 MEMORY_MANAGEMENT this site ntoskrnl.exe+75bc0 MEMORY_MANAGEMENT searching for help on an ntoskrnl exe bc MEMORY MANAGEMENT error I have run the longest test x memtest -usb booted PC from a USB flash drive and did not discover any errors related to the SDRAM I determined this was the error from BlueScreenView exe I followed the same directions supplied by the moderator whom helped another gent determine that he had bad SDRAM who had the same errors and am hoping that he could have a look at ntoskrnl.exe+75bc0 MEMORY_MANAGEMENT my Speccy profile and uploaded results file Here is a link to the Speccy profile I just generated and uploaded using v -bit version of Speccy http speccy piriform com results C Mq IynvW oBu bsORhvNv I have also uploaded the Result txt file that was generated from MiniToolBox File version Product version by selecting List last Event Viewer Errors List Installed Programs List Users Partitions and Memory size Thank you in advance for your time and effort in helping me determine if this issue is SW driver FW Bios or HW related Best regards David Grant p s - the user Dick is my father in law whom I am helping to debug why the computer randomly keeps restarting every day or so Pasted MTB data into post deleted attachment - Hamluis MiniToolBox by Farbar Version - - Ran by Dick administrator on - - at Running from C Users Dick Downloads Microsoft Windows Professional Service Pack X Boot Mode Normal Event log errors Application errors Error AM Source Application Error User Description Faulting application name PlexNewTranscoder exe version time stamp x Faulting module name PlexNewTranscoder exe version time stamp x Exception code xc Fault offset x ba e Faulting process id xcb Faulting application start time xPlexNewTranscoder exe Faulting application path PlexNewTranscoder exe Faulting module path PlexNewTranscoder exe Report Id PlexNewTranscoder exe Error AM Source Application Error User Description Faulting application name PlexNewTranscoder exe version time stamp x Faulting module name PlexNewTranscoder exe version time stamp x Exception code xc Fault offset x ba e Faulting process id x c Faulting application start time xPlexNewTranscoder exe Faulting application path PlexNewTranscoder exe Faulting module path PlexNewTranscoder exe Report Id PlexNewTranscoder exe Error AM Source Application Error User Description Faulting application name PlexNewTranscoder exe version time stamp x Faulting module name PlexNewTranscoder exe version time stamp x Exception code xc Fault offset x ed Faulting process id xf Faulting application start time xPlexNewTranscoder exe Faulting application path PlexNewTranscoder exe Faulting module path PlexNewTranscoder exe Report Id PlexNewTranscoder exe Error AM Source Application Error User Description Faulting application name PlexNewTranscoder exe version time stamp x Faulting module name pthreadGC dll version time stamp x f Exception code xc Fault offset x Faulting process id x Faulting application start time xPlexNewTranscoder exe Faulting application path PlexNewTranscoder exe Faulting module path PlexNewTranscoder exe Report Id PlexNewTranscoder exe Error AM Source Application Error User Description Faulting application name PlexNewTranscoder exe version time stamp x Faulting module name PlexNewTranscoder exe version time stamp x Exception code xc Fault offset x ba c Faulting process id x a Faulting application start time xPlexNewTranscoder exe Faulting application path PlexNewTranscoder exe Faulting module path PlexNewTranscoder exe Report Id PlexNewTranscoder exe Error AM Source Application Error User Description Faulting application name PlexNewTranscoder exe version time stamp x Faulting module name PlexNewTranscoder exe version time stamp x Exception code xc Fault offset x d b Faulting process id x Faulting application start time xPlexNewTranscoder exe Faulting application path PlexNewTranscoder exe Faulting module path PlexNewTranscoder exe Repor... Read more

A:ntoskrnl.exe+75bc0 MEMORY_MANAGEMENT

I will not download anything to my computer unless I know exactly what it contains.  Please follow the instructions below and post the results in your topic.  Do not wrap it in code or use quotes.
 
Please download MiniToolBox, save it to your desktop and run it.
 
Checkmark the following checkboxes:
 
• List last 10 Event Viewer log
• List Installed Programs
• List Users, Partitions and Memory size.
• List Minidump Files
 
Click on Go to start the scan.  Once it is finished highlight the text, copy it and paste it in your next post.

http://www.bleepingcomputer.com/forums/t/557232/ntoskrnlexe75bc0-memory-management/
Relevancy 72.24%

I've had this machine for six months and today (10/3) marks the first BSOD I've had, which occurred while I was browsing online. It may seem like I'm jumping the gun on this ? ony one BSOD ? but I couldn't find anything on the forum that seemed to specifically match this and I was thinking it might be nice to nip it in the bud.

DRIVER_POWER_STATE_FAILURE
0x0000009f 00000000`00000003 fffffa80`0b10cbf0 fffff800`0488a3d8 fffffa80`091dd860
ntoskrnl.exe+75bc0
6.1.7601.18409 (win7sp1_gdr.140303-2144)

Fwiw, two changes were made to the system this week ? Adobe Extension Manager CC updated and KB3001554 was installed, both on 10/2.

DM Log attached.

Thanks in advance.

A:DRIVER_POWER_STATE_FAILURE ntoskrnl.exe + 75bc0

Attachment 335512

http://www.sevenforums.com/bsod-help-support/347644-driver_power_state_failure-ntoskrnl-exe-75bc0.html
Relevancy 72.24%

lately i'm getting alot of BSOD. I have attached the DMP.
Any suggestions please?

A:DRIVER_POWER_STATE_FAILURE ntoskrnl.exe + 75bc0

Welcome to the forum rickly,

Looks like you reinstalled windows sometime back. Did you happen to update the Realtek USB Card Reader after that?


Code:
Microsoft (R) Windows Debugger Version 6.2.9200.20512 X86
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Downloads\RICKLY-PC-Tue_10_21_2014__11049_35\102014-22760-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff8a0`00224622?
DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff8a0`03212c32?
DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff8a0`03359682?
DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff8a0`028d4c32?
DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff800`00b9a3c0?
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.18526.amd64fre.win7sp1_gdr.140706-1506
Machine Name:
Kernel base = 0xfffff800`03059000 PsLoadedModuleList = 0xfffff800`0329c890
Debug session time: Mon Oct 20 23:51:54.131 2014 (UTC + 6:00)
System Uptime: 0 days 0:17:21.520
Loading Kernel Symbols
...............................................................
................................................................
....................................
Loading User Symbols
Loading unloaded module list
.........
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa8006cbc060, fffff80000b9a3d8, fffffa8006680c60}

*************************************************************************
*** ***
*** ***
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: USBHUB!_DEVICE_EXTENSION_PDO ***
*** ***
*************************************************************************
Unable to load image \SystemRoot\System32\Drivers\RtsUStor.sys, Win32 error 0n2
*** WARNING... Read more

http://www.sevenforums.com/bsod-help-support/349550-driver_power_state_failure-ntoskrnl-exe-75bc0.html
Relevancy 72.24%

Dears I have purchased years back and from that I am facing BSOD I have searched ntoskrnl.exe+75bc0 IRQL_NOT_LESS_OR_EQUAL a lot but cannot find any solution I have checked hard drive with IRQL_NOT_LESS_OR_EQUAL ntoskrnl.exe+75bc0 error-checking tool in windows but it shows OK I also completely service the laptop and apply proper thermal paste and do all stuff to eliminate all issues if it occurs because of improper ventilation But nothing helpful for me Then I unplug RAM from a slot and BSOD was not happening as much like before But from few weeks it is happening again as I did not attached that RAM again but cannot able to understand that why this error occurs again and again Unfortunately I have performed disk-cleanup - days ago so I just have dump files which I am attaching Sometime BSOD occurs but dump file won't able to store in dump folder and then I need to shut off the system by holding the power button I have search on internet and some share software to check harddrive using this software and this shows quot Air Flow Temperature quot which is highlighted in red color Does it is the cause of BSOD Please any one review my dump files and help me to resolve the issue Thanks in Advance Umar

A:IRQL_NOT_LESS_OR_EQUAL ntoskrnl.exe+75bc0

Hi,

Can you please run Seatools?
SeaTools | Seagate

You can run it via Windows or DOS. Do note that the only difference is simply the environment you're running it in. In Windows, if you are having what you believe to be driver related issues that may cause conflicts or a false positive, it may be a wise decision to choose the most minimal testing environment (DOS). I always recommend running Seatools in DOS if absolutely possible.

-- Run all tests EXCEPT: Fix All and anything Advanced.

Regards,

Patrick

http://www.techsupportforum.com/forums/f299/irql_not_less_or_equal-ntoskrnl-exe-75bc0-908122.html
Relevancy 71.38%

In the recent 2 weeks I'm getting around 2-3 BSOD per day
Could anyone help me regarding this, the laptop is almost 1M old, a Lenovo B5400.

A:BSDO DRIVER_POWER_STATE_FAILURE ntoskrnl.exe + 75bc0

Hi rickly.

The post is not made following the Blue Screen of Death (BSOD) Posting Instructions. So we are having an incomplete view of the situation only.

Moreover, there are multiple bugchecks.

Anyway, disable bluetooth in device manager. Disable the card reader, too. These two are causing the issues there, and mostly those are not needed.

If you must to use those, try for updates from Laptops and netbooks :: Lenovo B Series laptops :: Lenovo B5400 Notebook :: 20278 - Lenovo Support (US) .... but I will suggest you disable those.

Let us know for any further BSOD, properly.
___________________________________________

Code:
BugCheck A, {0, 2, 1, fffff800030cd97c}

*** WARNING: Unable to verify timestamp for RtkA2dp.sys
*** ERROR: Module load completed but symbols could not be loaded for RtkA2dp.sys
Probably caused by : RtkA2dp.sys ( RtkA2dp+15b9c )

Followup: MachineOwner
---------

Code:
BugCheck 9F, {3, fffffa80077d7060, fffff80000b9a3d8, fffffa8007e51c60}

Unable to load image \SystemRoot\System32\Drivers\RtsUStor.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for RtsUStor.sys
*** ERROR: Module load completed but symbols could not be loaded for RtsUStor.sys
Probably caused by : usbhub.sys

Followup: MachineOwner
---------

http://www.sevenforums.com/bsod-help-support/350536-bsdo-driver_power_state_failure-ntoskrnl-exe-75bc0.html
Relevancy 71.38%

Hello I know you have in Crashes 50+ One Month ntoskrnl.exe+75bc0 probably had to answer million of these questions but I am just frustrated and stumped I have been building and working with PC's for nearly years but this is just messing with me I have an old PC using it for now while new PC parts are shipped for a new rig psyched Once those come in I am turning 50+ ntoskrnl.exe+75bc0 Crashes in One Month this one over to my teen daughter for school work and what not I am unsure if it is a driver issue or software issue I am hoping to just start from the beginning and weed out the problem So please be patient with me This is a compact report of the problem generated using ' BluescreenView' Dump File - - dmp Crash Time Bug Check String IRQL NOT LESS OR EQUAL Bug Check Code x a Parameter fffff daf b Parameter Parameter Parameter fffff daf b Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe bc File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win sp gdr - Processor x Crash Address ntoskrnl exe bc Stack Address Stack Address Stack Address Computer Name Full Path C Windows MiniDump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File Time And a link to the actual dump file is HERE Anything else you might need I will quickly and easily provide Thanks in advance for any help you can give

A:50+ ntoskrnl.exe+75bc0 Crashes in One Month

Follow the instructions here> http://www.techsupportforum.com/foru...ta-452654.html
Lets see if the BSOD dump file(s) can tell us whats going on.

http://www.techsupportforum.com/forums/f299/50-ntoskrnl-exe-75bc0-crashes-in-one-month-939186.html
Relevancy 71.38%

I built a new machine about weeks ago MAchine booted up fine and ran with no issues All drivers installed fine no errors A few days later i started getting minidump errors when coming to my machine after it was sitting idle for a time So i dont turn my machine off at night I have been having Random crashes ALWAYS when the machine is idle If i am physically using the machine ie browsing gaming etc no crash if i walk aways for a time and leave it running i till come back to a your machine has recovered from a serious error message saying the error occured x hal dll a b and ntoskrnl exe bc I have removed all components blown out all the sockets and replaced them making sure each one is properly seated in the sockets I am using an after market Cooler on the CPU real temp shows the temps are normal though i dont know if this ever changes Only going by the real temp display on my notification bar All fans are running ntoskrnl exe bc and set to full speed Machine has crashed times since the th july all for same error Hope someone can help cause i am stumped minidumps are here http ppl ug YUexjn SeU Speccy http speccy piriform com results gR YnYI cglguXyCSkTCY Minidump attached nbsp minitool dump txt nbsp nbsp KB nbsp nbsp downloads

A:0x00000124 Error on Hal.dll and ntoskrnl.exe+75bc0

Googling a bit seems to point to hardware issues, the fact that it only happens when you leave the computer on alone but not when you are using it would point me to think there's something going on with powersaving options, not sure tough, are you overclocking your processor?
 
Maybe it has to do with so many harddrives plugged in at one and hard drive power saving features, but i'm no expert tough.

http://www.bleepingcomputer.com/forums/t/543018/0x00000124-error-on-haldll-and-ntoskrnlexe75bc0/
Relevancy 70.52%

I've been getting several constant BSODS as of late in the middle of doing work. Every I get the crash it says "MEMORY_MANAGEMENT". I have already ran Memtest on my system about 10 times and nothing came up at all. I looked up on BlueScreenView and it says that ntoskrnl.exe+75bc0.exe is at fault. Any ideas as to what to do to remedy this?

A:Constant BSODS (ntoskrnl.exe+75bc0) at fault

  
Quote: Originally Posted by sixty01


I've been getting several constant BSODS as of late in the middle of doing work. Every I get the crash it says "MEMORY_MANAGEMENT". I have already ran Memtest on my system about 10 times and nothing came up at all. I looked up on BlueScreenView and it says that ntoskrnl.exe+75bc0.exe is at fault. Any ideas as to what to do to remedy this?


Before we start, can you tell us which program you ran to test the memory and for how long?
A link of the program would be a nice explanation.

And, 10 times ... what does it exactly mean? You tested the memory for ten different instances?

Please let us know. This information would be very vital.

http://www.sevenforums.com/bsod-help-support/370947-constant-bsods-ntoskrnl-exe-75bc0-fault.html
Relevancy 69.66%

I seem to be getting seemingly random bluescreens mainly during booting or after - minutes It will blue screen about times then work fine for days on end The blue screen bug check strings seem to vary PAGE BSODs of - ntoskrnl.exe+75bc0 Lots address crash FAULT IN NONPAGED AREA x fffff dc ea fffff dc ea umbus sys umbus sys e f ntoskrnl exe Lots of BSODs - crash address ntoskrnl.exe+75bc0 b x PAGE FAULT IN NONPAGED AREA x fffff fffff ed ntoskrnl exe ntoskrnl exe b ntoskrnl exe b x PAGE FAULT IN NONPAGED AREA x a iusb xhc sys iusb xhc sys b aae ntoskrnl exe bc x PAGE FAULT IN NONPAGED AREA x fffff c f fffff d ntoskrnl exe ntoskrnl exe bc ntoskrnl exe bc x SYSTEM SERVICE EXCEPTION x b c fffff c fffff fef fltmgr sys fltmgr sys c ntoskrnl exe bc x PAGE FAULT IN NONPAGED AREA x fffff ec ea fffff ec ea igdkmd sys igdkmd sys f ntoskrnl exe bc x MEMORY MANAGEMENT x a fffff ddcc fffff c ntoskrnl exe ntoskrnl exe bc ntoskrnl exe bc x SYSTEM SERVICE EXCEPTION x b c fffff e a fffff df f RTKVHD sys RTKVHD sys fde f ntoskrnl exe bc x PAGE FAULT IN NONPAGED AREA x fffff fd f b fffff e f ntoskrnl exe ntoskrnl exe bc ntoskrnl exe bc x PAGE FAULT IN NONPAGED AREA x fffff ed ea fffff ed ea ntoskrnl exe ntoskrnl exe bc ntoskrnl exe bc x NTFS FILE SYSTEM x fb fffff a d fffff a fffff dffa Ntfs sys Ntfs sys ntoskrnl exe bc x MEMORY MANAGEMENT x a fffffa bc ffff RTKVHD sys RTKVHD sys ccb d ntoskrnl exe bc x PAGE FAULT IN NONPAGED AREA x fffff a ae ec fffff cac ntoskrnl exe ntoskrnl exe bc ntoskrnl exe bc x PAGE FAULT IN NONPAGED AREA x fffffa cb a fffff feb e AgileVpn sys AgileVpn sys e ntoskrnl exe bc x PAGE FAULT IN NONPAGED AREA x fffff b fffff e d usbhub sys usbhub sys da ed ntoskrnl exe bc x PAGE FAULT IN NONPAGED AREA x fffff e fffff ecd d luafv sys luafv sys d ntoskrnl exe bc x KMODE EXCEPTION NOT HANDLED x e ffffffff c fffff a d ntoskrnl exe ntoskrnl exe bc ntoskrnl exe bc x SYSTEM SERVICE EXCEPTION x b c fffff a fffff b d iusb xhc sys iusb xhc sys d ntoskrnl exe bc x PAGE FAULT IN NONPAGED AREA x fffff c dac fffff ead iusb xhc sys iusb xhc sys ntoskrnl exe bc x MEMORY MANAGEMENT x a fffff d e e fffffa f serscan sys serscan sys b e e ntoskrnl exe bc x MEMORY MANAGEMENT x a fffff RTKVHD sys RTKVHD sys b ntoskrnl exe bc x MEMORY MANAGEMENT x a fffffa a bcbc ffff ntoskrnl exe ntoskrnl exe bc ntoskrnl exe bc x MEMORY MANAGEMENT x a e fffff fltmgr sys fltmgr sys f ntoskrnl exe bc x PAGE FAULT IN NONPAGED AREA x fffff e dc e f fffff b serscan sys serscan sys a b e ntoskrnl exe bc x PAGE FAULT IN NONPAGED AREA x fffff e d d fffff a HDAudBus sys HDAudBus sys fef d ntoskrnl exe bc x MEMORY MANAGEMENT x a fffffa a db ffff HDAudBus sys HDAudBus sys a d b ntoskrnl exe bc x I've tried running a memtest for about cycles and it came back fine I've also ran prime for hours and furmark for hours I've updated the intel graphics card driver to the latest version The bios and other drivers are all the latest available from gigabyte I've also done a sfc scannow which came back fine I also ran chkdsk a few times to clear out any errors caused by the improper shutdowns I'm not really sure whats causing the problem and really appreciate your feedback

A:Lots of BSODs - crash address ntoskrnl.exe+75bc0

Hi Kaxpix.

Yes, you have experienced a real lot of BSODs. Please perform the following, which will help us to go for the further troubleshooting in case.

Make it sure that the Samsung 840 series SSD is running with the up-to date firmware. See here: Samsung SSD (Solid State Drive) 840 series | Samsung SSD Website

ESET is failing there ....

Code:
fffff880`0264a6f8 fffff880`04a8e600Unable to load image epfwwfpr.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for epfwwfpr.sys
*** ERROR: Module load completed but symbols could not be loaded for epfwwfpr.sys
epfwwfpr+0x1f600
Description here: Driver Reference Table - epfwwfpr.sys

Uninstall ESET, at least as a test. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.
Download, install and update those, and then run full system scans with both of them, one by one.

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight. If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.
Then let us know how it is running. We need to take necessary actions depending on the situation then.

http://www.sevenforums.com/bsod-help-support/309718-lots-bsods-crash-address-ntoskrnl-exe-75bc0.html
Relevancy 69.23%

I keep getting a BSOD I get a message that pops up when the computer restarts that says Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the BSOD causing ntoskrnl.exe problem BCCode BCP BCP A F BCP BCP OS Version Service Pack Product Files that help describe the problem C Windows Minidump - - dmp C Users Martin AppData Local Temp WER- - sysdata xml Read our privacy statement online Windows Privacy Highlights - Microsoft Windows If the online privacy statement is not available please read our privacy statement offline ntoskrnl.exe causing BSOD C Windows system en-US erofflps txt -------------------------------------------------------------------------------- I ran a scan with Blue Screen View and got this Dump File - - dmp Crash Time PM Bug Check String Bug Check Code x Parameter x Parameter x a f Parameter x Parameter x Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe f File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win rtm - Processor -bit Computer Name Full Path C Windows minidump - - dmp Dump File - - dmp Crash Time PM Bug Check String Bug Check Code x Parameter x Parameter x Parameter x Parameter x Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe f File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win rtm - Processor -bit Computer Name Full Path C Windows minidump - - dmp Dump File - - dmp Crash Time PM Bug Check String Bug Check Code x Parameter x Parameter x d Parameter x Parameter x Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe f File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win rtm - Processor -bit Computer Name Full Path C Windows minidump - - dmp Dump File - - dmp Crash Time PM Bug Check String Bug Check Code x Parameter x Parameter x f dc Parameter x Parameter x Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe f File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win rtm - Processor -bit Computer Name Full Path C Windows minidump - - dmp Dump File - - dmp Crash Time AM Bug Check String Bug Check Code x Parameter x Parameter x a Parameter x Parameter x Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe f File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win rtm - Processor -bit Computer Name Full Path C Windows minidump - - dmp Dump File - - dmp Crash Time PM Bug Check String Bug Check Code x Parameter x Parameter x dc Parameter x Parameter x Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe f File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win rtm - Processor -bit Computer Name Full Path C Windows minidump - - dmp Dump File - - dmp Crash Time AM Bug Check String Bug Check Code x Parameter x Parameter x d fc Parameter x Parameter x Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe f File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win rtm - Processor -bit Computer Name Full Path C Windows minidump - - dmp Dump File - - dmp Crash Time PM Bug Check String Bug Check Code x Parameter x Parameter x b Parameter x Parameter x Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe f File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win rtm - Processor -bit Computer Name Full Path C Windows minidump - - dmp Dump File - - dmp Crash Time PM Bug Check String Bug Check Code x Parameter x Parameter x d Parameter x Parameter x Caused By Driver ntoskrnl exe Caused By Ad... Read more

A:ntoskrnl.exe causing BSOD

  
Quote: Originally Posted by Firestar


I keep getting a BSOD. I get a message that pops up when the computer restarts that says:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: 124
BCP1: 00000000
BCP2: 8572A6F4
BCP3: 00000000
BCP4: 00000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\121209-63062-01.dmp
C:\Users\Martin\AppData\Local\Temp\WER-83265-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Highlights - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

--------------------------------------------------------------------------------
I ran a scan with Blue Screen View and got this.

==================================================
Dump File : 121209-63062-01.dmp
Crash Time : 12/12/2009 6:51:59 PM
Bug Check String :
Bug Check Code : 0x00000124
Parameter 1 : 0x00000000
Parameter 2 : 0x8572a6f4
Parameter 3 : 0x00000000
Parameter 4 : 0x00000000
Caused By Driver : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+316f63
File Description : NT Kernel & System
Product Name : Microsoft? Windows? Operating System
Company : Microsoft Corporation
File Version : 6.1.7600.16385 (win7_rtm.090713-1255)
Processor : 32-bit
Computer Name :
Full Path : C:\Windows\minidump\121209-63062-01.dmp
==================================================

==================================================
Dump File : 120809-42843-01.dmp
Crash Time : 12/8/2009 12:50:17 PM
Bug Check String :
Bug Check Code : 0x00000124
Parameter 1 : 0x00000000
Parameter 2 : 0x85736604
Parameter 3 : 0x00000000
Parameter 4 : 0x00000000
Caused By Driver : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+316f63
File Description : NT Kernel & System
Product Name : Microsoft? Windows? Operating System
Company : Microsoft Corporation
File Version : 6.1.7600.16385 (win7_rtm.090713-1255)
Processor : 32-bit
Computer Name :
Full Path : C:\Windows\minidump\120809-42843-01.dmp
==================================================

==================================================
Dump File : 120409-54046-01.dmp
Crash Time : 12/4/2009 12:16:46 PM
Bug Check String :
Bug Check Code : 0x00000124
Parameter 1 : 0x00000000
Parameter 2 : 0x856d3024
Parameter 3 : 0x00000000
Parameter 4 : 0x00000000
Caused By Driver : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+316f63
File Description : NT Kernel & System
Product Name : Microsoft? Windows? Operating System
Company : Microsoft Corporation
File Version : 6.1.7600.16385 (win7_rtm.090713-1255)
Processor : 32-bit
Computer Name :
Full Path : C:\Windows\minidump\120409-54046-01.dmp
==================================================

==================================================
Dump File : 120409-59203-01.dmp
Crash Time : 12/4/2009 12:13:40 PM
Bug Check String :
Bug Check Code : 0x00000124
Parameter 1 : 0x00000000
Parameter 2 : 0x8575f4dc
Parameter 3 : 0x00000000
Parameter 4 : 0x00000000
Caused By Driver : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+316f63
File Description : NT Kernel & System
Product Name : Microsoft? Windows? Operating System
Company : Microsoft Corporation
File Version : 6.1.7600.16385 (win7_rtm.090713-1255)
Processor : 32-bit
Computer Name :
Full Path : C:\Windows\minidump\120409-59203-01.dmp
==================================================

================================================... Read more

http://www.sevenforums.com/bsod-help-support/46451-ntoskrnl-exe-causing-bsod.html
Relevancy 69.23%

i've checked my minidump files and all my BSODs point to ntoskrnl.exe because it couldnt load image or something.... and typing ... expand e:\i386\ntoskrnl.ex_ c:\windows\system32 ...does not work for me (in recovery console from windows cd) ... (e:\ because i have 2 partitions and cd rom is e drive)


plz can anyone give any advice on how to fix this problem
 

A:ntoskrnl.exe causing BSOD

Start by:

Checking hard drive for errors...

then check Memory using Memtest86

then check for Viruses, spyware/malware

Then run CCleaner to clean up files

Let us know what you find
 

http://www.techspot.com/community/topics/ntoskrnl-exe-causing-bsod.80507/
Relevancy 69.23%

Hi need a little help with my PC I built a few years ago Recently upgraded to Windows bit but was also receiving BSOD in Windows I ve ran memtest successfully overnight causing ntoskrnl.exe BSOD and ran numerous chkdsk system repair tests which found no ntoskrnl.exe causing BSOD errors PC has froze a few times as well just watching Youtube vids with my video card removed as a test I ve attached two dmp files if anyone could help me diagnose Thanks in advance Here are a few specs ntoskrnl.exe causing BSOD from my PC - ASUS M A T-E AM AMD GX HDMI ATX AMD Motherboard - ASUS EN GS Silent P M GeForce GS MB -bit DDR PCI Express x HDCP Ready Video Card - ntoskrnl.exe causing BSOD AMD Phenom II X Black Edition Deneb GHz Socket AM W Quad-Core Processor HDZ FBGMBOX - G SKILL Ripjaws Series GB x GB -Pin DDR SDRAM DDR PC Desktop Memory Model F - CL D- - Western Digital WD Blue WD AAKS GB RPM SATA Gb s quot Internal Hard Drive -Bare Drive

A:ntoskrnl.exe causing BSOD

Hello gbleezy,I've had a look at the two dump files but they weren't very enlightening, at least to my eyes. STOP 0x00000139: KERNEL_SECURITY_CHECK_FAILUREBecause this deals with system security, it would be worth double checking the system for malware: Eset Online Scanner Malwarebytes Anti-malware FreeUncheck the offer for trial Pro version).[/list]Old Driver:ASACPI.sys Sun Mar 27 22:30:36 2005 (42476C4C)Asus ATK0110 ACPI Utility (a known BSOD maker in Win7). Also a part of the Asus PCProbe and AISuite Utilitieshttp://www.carrona.org/drivers/driver.php?id=ASACPI.sysIf you have either Asus PCProbe and AISuite Utilities installed, please uninstall them, at least until the system is stable.Network Drivers:Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller (NDIS6.20) Realtek RTL8192SU Wireless LAN 802.11n USB 2.0 Network Adapter Driver Windows 7 had many issues with USB network devices. Not sure about Windows 8 yet. If you are using the USB wireless but have the option to hard wire into the Atheros, you could try it as a test. I would uninstall the Realtek USB temporarily. Realtek RTL8192SU Wireless LAN 802.11n USB 2.0 Network Adapter Drivershttp://www.carrona.org/drivers/driver.php?id=RTL8192su.sysBSOD Bug Check Code: For informational purposes only.
Spoiler
Debug session time: Mon Dec 31 00:24:11.818 2012 (UTC - 5:00)Loading Dump File [D:\Download_D\BleepingComputer_BSOD\gbleezy\123012-16208-01.dmp]Built by: 9200.16461.amd64fre.win8_gdr.121119-1606System Uptime: 1 days 9:40:39.503Probably caused by : ntkrnlmp.exe ( nt!KiFastFailDispatch+d0 )BugCheck 139, {3, fffff8800e0d1890, fffff8800e0d17e8, 0}BugCheck Info: Unknown bugcheck code (139)Bugcheck code 00000139Arguments:Arg1: 0000000000000003Arg2: fffff8800e0d1890Arg3: fffff8800e0d17e8Arg4: 0000000000000000BUGCHECK_STR: 0x139DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULTPROCESS_NAME: chrome.exeFAILURE_BUCKET_ID: X64_0x139_nt!KiFastFailDispatch+d0BiosVersion = 3503BiosReleaseDate = 04/13/2011SystemManufacturer = System manufacturerSystemProductName = System Product Name??????????????????????????????????????????????????????????????????????????????????????``Debug session time: Fri Dec 28 13:24:36.600 2012 (UTC - 5:00)Loading Dump File [D:\Download_D\BleepingComputer_BSOD\gbleezy\122812-23712-01.dmp]Built by: 9200.16461.amd64fre.win8_gdr.121119-1606System Uptime: 0 days 12:46:08.824Probably caused by : Pool_Corruption ( nt!ExFreePool+3ec )BugCheck 19, {3, fffffa8008591630, fffffa8008591430, fffffa8008591630}BugCheck Info: BAD_POOL_HEADER (19)Bugcheck code 00000019Arguments:Arg1: 0000000000000003, the pool freelist is corrupt.Arg2: fffffa8008591630, the pool entry being checked.Arg3: fffffa8008591430, the read back flink freelist value (should be the same as 2).Arg4: fffffa8008591630, the read back blink freelist value (should be the same as 2).BUGCHECK_STR: 0x19_3PROCESS_NAME: MsMpEng.exeFAILURE_BUCKET_ID: X64_0x19_3_nt!ExFreePool+3ecBiosVersion = 3503BiosReleaseDate = 04/13/2011SystemManufacturer = System manufacturerSystemProductName = System Product Name

http://www.bleepingcomputer.com/forums/t/480217/ntoskrnlexe-causing-bsod/
Relevancy 69.23%

Hi,
I've had 2 bsods and one of them was irql_not_less_or_equal and the second was system service exception. They have this common thing which is ntoskrnl.exe and i dont know what do to solve the problem i hope you can help.
You can see all the info in the rar included.

A:ntoskrnl.exe causing BSOD

Analysis:Crashes indicate an issue with your Intel storage drivers.Go to Intel? Driver Update Utility,
run the utility,
click on the link for Chipset Family,
Scroll down and select Standard Version or Intel Rapid Storage Technology (not the Enterprise version).
There is a page that loads with information on other Intel drivers for your system including Intel storage drivers. You may have to let it load for 10-15 seconds before it displays your particular drivers link.
Go to that link, download the drivers, and install them.

3rd Party Drivers:The following are for informational purposes only:
Code:
regi.sys Mon Apr 16 09:19:10 2007 (462393EE)
GEARAspiWDM.sys Mon May 18 06:17:04 2009 (4A1151C0)
ArcSoftKsUFilter.sys Mon May 25 02:27:31 2009 (4A1A5673)
intelppm.sys Mon Jul 13 17:19:25 2009 (4A5BC0FD)
PxHlpa64.sys Tue Oct 20 12:08:42 2009 (4ADDFCAA)
SFEP.sys Thu Nov 26 22:39:13 2009 (4B0F6601)
aswNdis.sys Sat Jan 9 14:22:03 2010 (4B48F37B)
amdxata.sys Fri Mar 19 10:18:18 2010 (4BA3A3CA)
MOBK649.sys Wed Apr 7 16:06:36 2010 (4BBD01EC)
HECIx64.sys Tue Oct 19 17:33:43 2010 (4CBE2AD7)
rimssne64.sys Wed Oct 20 19:33:06 2010 (4CBF9852)
nusb3xhc.sys Thu Dec 9 21:50:35 2010 (4D01B19B)
nusb3hub.sys Thu Dec 9 21:50:35 2010 (4D01B19B)
risdsnxc64.sys Fri Dec 17 05:45:48 2010 (4D0B5B7C)
SynTP.sys Fri Dec 17 09:51:13 2010 (4D0B9501)
iaStor.sys Wed Jan 12 18:50:12 2011 (4D2E5A54)
nvhda64v.sys Thu Mar 3 08:59:02 2011 (4D6FBAC6)
Rt64win7.sys Thu Apr 21 12:15:33 2011 (4DB07445)
btath_bus.sys Fri May 27 06:02:47 2011 (4DDF92E7)
nvBridge.kmd Thu Jun 16 20:57:30 2011 (4DFAC29A)
nvlddmkm.sys Thu Jun 16 21:08:19 2011 (4DFAC523)
athrx.sys Tue Jun 21 02:03:39 2011 (4E00505B)
RTKVHD64.sys Fri Jun 24 04:44:10 2011 (4E046A7A)
dtsoftbus01.sys Fri Jan 13 06:45:46 2012 (4F10358A)
aswFsBlk.SYS Tue Mar 6 17:01:31 2012 (4F56A55B)
aswMonFlt.sys Tue Mar 6 17:01:51 2012 (4F56A56F)
aswTdi.SYS Tue Mar 6 17:01:56 2012 (4F56A574)
aswrdr2.sys Tue Mar 6 17:02:19 2012 (4F56A58B)
aswKbd.SYS Tue Mar 6 17:02:44 2012 (4F56A5A4)
aswNdis2.sys Tue Mar 6 17:03:28 2012 (4F56A5D0)
aswSP.SYS Tue Mar 6 17:04:03 2012 (4F56A5F3)
aswSnx.SYS Tue Mar 6 17:04:05 2012 (4F56A5F5)
aswFW.SYS Tue Mar 6 17:04:29 2012 (4F56A60D)
regi.sys
GEARAspiWDM.sys
ArcSoftKsUFilter.sys
intelppm.sys
PxHlpa64.sys
SFEP.sys
aswNdis.sys
amdxata.sys
MOBK649.sys - Mozy Change Monitor Filter Driver
HECIx64.sys
rimssne64.sys
nusb3xhc.sys
nusb3hub.sys
risdsnxc64.sys - Ricoh Memory Controller
SynTP.sys
iaStor.sys
nvhda64v.sys
Rt64win7.sys
btath_bus.sys
nvBridge.kmd
nvlddmkm.sys
athrx.sys
RTKVHD64.sys
dtsoftbus01.sys
aswFsBlk.SYS
aswMonFlt.sys
aswTdi.SYS
aswrdr2.sys
aswKbd.SYS
aswNdis2.sys
aswSP.SYS
aswSnx.SYS
aswFW.SYS

http://www.sevenforums.com/bsod-help-support/240830-ntoskrnl-exe-causing-bsod.html
Relevancy 69.23%

Hi,

I've had this pc for about 4 months and it has suddenly started crashing, the first two were prior to a system restore so I don't have the dump files, however the subsequent two I do and they're attached as the results of the SF_diagnostic_tool report.

Not sure what other information is needed?

Thanks.

Edit:
So after posting this the computer crashed a further perhaps 10 times. I've removed all peripherals (speakers, mouse, keyboard) to check that this had nothing to do with it and the crashes persisted. The most recent crash occurred while I was attempting to reinstall Windows by booting from CD. Something I haven't done due to this crash. Attached is the more recent set of reports from SF_diagnostic_tool (Underscore2). I'm beginning to think this may be a hardware issue (the pc was a custom build).

A:ntoskrnl.exe causing BSOD

I can't tell exactly what's happening inside the NVidia driver at the time of the crash, but I can make a guess it's probably trying to retrieve internal values and is crashing within itself (and thus causing the bugcheck):

Code:
3: kd> .bugcheck
Bugcheck code 00000050
Arguments fffff880`0c83edc0 00000000`00000001 fffff880`04185f20 00000000`00000002

3: kd> !thread
GetPointerFromAddress: unable to read from fffff801e01dc000
THREAD fffffa80072d8080 Cid 0d60.06e4 Teb: 000000007f3a5000 Win32Thread: fffff9010260eb90 RUNNING on processor 3
Not impersonating
GetUlongFromAddress: unable to read from fffff801e00fbcf0
Owning Process fffffa80088df940 Image: chrome.exe
Attached Process N/A Image: N/A
fffff78000000000: Unable to get shared data
Wait Start TickCount 83473
Context Switch Count 5107 IdealProcessor: 3
ReadMemory error: Cannot get nt!KeMaximumIncrement value.
UserTime 00:00:00.000
KernelTime 00:00:00.000
Win32 Start Address 0x00000000624a7588
Stack Init fffff8800c5a0c90 Current fffff8800c5a06a0
Base fffff8800c5a1000 Limit fffff8800c59b000 Call 0
Priority 11 BasePriority 8 UnusualBoost 0 ForegroundBoost 2 IoPriority 2 PagePriority 5
Child-SP RetAddr : Args to Child : Call Site
fffff880`0c59e9c8 fffff801`dff9f57c : 00000000`00000050 fffff880`0c83edc0 00000000`00000001 fffff880`0c59ebb0 : nt!KeBugCheckEx
fffff880`0c59e9d0 fffff801`dff188eb : 00000000`00000001 fffff880`0c83edc0 fffffa80`072d8080 fffff880`0426c0d7 : nt! ?? ::FNODOBFM::`string'+0x33ec8
fffff880`0c59ea70 fffff801`dfedbcee : 00000000`00000001 fffffa80`09d5fa20 00000000`00000000 fffff880`0c59ebb0 : nt!MmAccessFault+0x55b
fffff880`0c59ebb0 fffff880`04185f20 : fffffa80`09d5fa00 fffffa80`09d5fa00 00000000`00000000 fffffa80`06c27010 : nt!KiPageFault+0x16e (TrapFrame @ fffff880`0c59ebb0)
fffff880`0c59ed40 fffffa80`09d5fa00 : fffffa80`09d5fa00 00000000`00000000 fffffa80`06c27010 fffff880`0c59f1a0 : nvlddmkm+0xcef20
fffff880`0c59ed48 fffffa80`09d5fa00 : 00000000`00000000 fffffa80`06c27010 fffff880`0c59f1a0 fffff880`0c59f194 : 0xfffffa80`09d5fa00
fffff880`0c59ed50 00000000`00000000 : fffffa80`06c27010 fffff880`0c59f1a0 fffff880`0c59f194 fffff8a0`01d1f2b0 : 0xfffffa80`09d5fa00

3: kd> .trap fffff880`0c59ebb0
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000000 rbx=0000000000000000 rcx=fffffa8007672010
rdx=0000000000000001 rsi=0000000000000000 rdi=0000000000000000
rip=fffff88004185f20 rsp=fffff8800c59ed40 rbp=fffff8800c59f260
r8=0000000000000001 r9=fffffa80099cd4d0 r10=0000000000000001
r11=fffffa8006967018 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei pl nz na pe nc
nvlddmkm+0xcef20:
fffff880`04185f20 88942480000000 mov byte ptr [rsp+80h],dl ss:0018:fffff880`0c59edc0=00

3: kd> kn
*** Stack trace for last set context - .thread/.cxr resets it
# Child-SP RetAddr Call Site
00 fffff880`0c59ed40 fffffa80`09d5fa00 nvlddmkm+0xcef20
01 fffff880`0c59ed48 fffffa80`09d5fa00 0xfffffa80`09d5fa00
02 fffff880`0c59ed50 00000000`00000000 0xfffffa80`09d5fa00

3: kd> u nvlddmkm+0xcef20
nvlddmkm+0xcef20:
fffff880`04185f20 88942480000000 mov byte ptr [rsp+80h],dl
fffff880`04185f27 4d85e4 test r12,r12
fffff880`04185f2a 7420 je nvlddmkm+0xcef4c (fffff880`04185f4c)
fffff880`04185f2c 84d2 test dl,dl
fffff880`04185f2e 0f8416020000 je nvlddmkm+0xcf14a (fffff880`0418614a)
fffff880`04185f34 41f74534ffff0100 test dword ptr [r13+34h],1FFFFh
fffff880`04185f3c 750e jne nvlddmkm+0xcef4c (fffff880`04185f4c)
fffff880`04185f3e 41f745340000feff test dword ptr [r13+34h],0FFFE0000h
3: kd> ub nvlddmkm+0xcef20
nvlddmkm+0xceefa:
fffff880`04185efa 488b8c2460040000 m... Read more

http://www.eightforums.com/bsod-crashes-debugging/24857-ntoskrnl-exe-causing-bsod.html
Relevancy 69.23%

i'm getting a lot of BSOD causing by ntoskrnl exe i think it's not a hardware causing BSOD ntoskrnl.exe lot a of problem because when i use ubuntu i dont get any hardware problem causing system to restart or hang here is all my BSOD details with minidumps hope someone help me Code Dump File - - dmp Crash Time ntoskrnl.exe causing a lot of BSOD PM Bug Check String SYSTEM SERVICE EXCEPTION Bug Check ntoskrnl.exe causing a lot of BSOD Code x b Parameter c Parameter fffff c c Parameter fffff f dd Parameter Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe f File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win rtm - Processor x Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time PM Bug Check String IRQL NOT LESS OR EQUAL Bug Check Code x a Parameter Parameter Parameter Parameter fffff dda Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe f File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win rtm - Processor x Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time PM Bug Check String IRQL NOT LESS OR EQUAL Bug Check Code x a Parameter Parameter Parameter Parameter fffff b Caused By Driver Caused By Address File Description Product Name Company File Version Processor x Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time PM Bug Check String IRQL NOT LESS OR EQUAL Bug Check Code x a Parameter e Parameter Parameter Parameter fffff a a Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe f File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win rtm - Processor x Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time PM Bug Check String IRQL NOT LESS OR EQUAL Bug Check Code x a Parameter Parameter Parameter Parameter fffff Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe f File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win rtm - Processor x Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time PM Bug Check String IRQL NOT LESS OR EQUAL Bug Check Code x a Parameter Parameter Parameter Parameter fffff ae Caused By Driver Caused By Address File Description Product Name Company File Version Processor x Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time PM Bug Check String IRQL NOT LESS OR EQUAL Bug Check Code x a Parameter Parameter Parameter Parameter fffff dfa Caused By Driver Caused By Address File Description Product Name Company File Version Processor x Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time PM Bug Check String IRQL NOT LESS OR EQUAL Bug Check Code x a Parameter Parameter Parameter Parameter fffff e Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe f File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win rtm - Processor x Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time PM Bug Check String KMODE EXCEPTION NOT HANDLED Bug Check Code x e Parameter Parameter Parameter Parameter Caused By Driver ataport SYS Caused By Address ataport SYS File Description Product Name Company File Version Processor x Co... Read more

A:ntoskrnl.exe causing a lot of BSOD

Hello,

I'm seeing some serious OS corruption going on, often indicative of hardware trouble. Would you mind running through these tests?

RAM - Test with Memtest86+

Run all three Prime96 tests: RAM - Test with Memtest86+

If the tests show nothing, please provide: http://www.sevenforums.com/crashes-d...tructions.html

...Summary of the dumps:

Code:

Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Fri Apr 22 07:05:02.124 2011 (UTC - 4:00)
System Uptime: 0 days 0:32:13.153
Probably caused by : ntkrnlmp.exe ( nt!KiSystemServiceHandler+7c )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x3B
PROCESS_NAME: dllhost.exe
FAILURE_BUCKET_ID: X64_0x3B_nt!KiSystemServiceHandler+7c
SystemProductName = HP Pavilion dv6500 Notebook PC
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Fri Apr 22 06:25:52.692 2011 (UTC - 4:00)
System Uptime: 0 days 0:00:57.845
Probably caused by : Pool_Corruption ( nt!ExDeferredFreePool+174 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0xA
PROCESS_NAME: rundll32.exe
FAILURE_BUCKET_ID: X64_0xA_nt!ExDeferredFreePool+174
SystemProductName = HP Pavilion dv6500 Notebook PC
??????????????????????????????????????????????????????????????????????????????????????``
*** WARNING: Unable to verify timestamp for Unknown_Module_753d6b1b`28ab31a4
*** ERROR: Module load completed but symbols could not be loaded for Unknown_Module_753d6b1b`28ab31a4
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Fri Apr 22 06:16:54.195 2011 (UTC - 4:00)
System Uptime: 0 days 0:00:54.349
*** WARNING: Unable to verify timestamp for Unknown_Module_753d6b1b`28ab31a4
*** ERROR: Module load completed but symbols could not be loaded for Unknown_Module_753d6b1b`28ab31a4
Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0xA
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Thu Apr 21 14:45:39.744 2011 (UTC - 4:00)
System Uptime: 0 days 0:44:09.898
Probably caused by : win32k.sys ( win32k!HmgDecProcessHandleCount+2c )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0xA
PROCESS_NAME: taskhost.exe
FAILURE_BUCKET_ID: X64_0xA_win32k!HmgDecProcessHandleCount+2c
SystemProductName = HP Pavilion dv6500 Notebook PC
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Thu Apr 21 13:57:55.750 2011 (UTC - 4:00)
System Uptime: 0 days 0:00:47.903
Probably caused by : ataport.SYS ( ataport!IdeCompleteScsiIrp+62 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0xA
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0xA_ataport!IdeCompleteScsiIrp+62
SystemProductName = HP Pavilion dv6500 Notebook PC
??????????????????????????????????????????????????????????????????????????????????????``
*** WARNING: Unable to verify timestamp for Unknown_Module_00206b6e`ffffff70
*** ERROR: Module load completed but symbols could not be loaded for Unknown_Module_00206b6e`ffffff70
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Thu Apr 21 13:56:23.726 2011 (UTC - 4:00)
System Uptime: 0 days 0:00:48.879
*** WARNING: Unable to verify timestamp for Unknown_Module_00206b6e`ffffff70
*** ERROR: Module load completed but symbols could not be loaded for Unknown_Module_00206b6e`ffffff70
Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0xA
??????????????????????????????????????????????????????????????????????????????????????``
*** WARNING: Unable to verify timestamp for Unknown_Module_02fd48d8`00000058
*** ERROR: Module load completed but symbols could not be loaded for Unknown_Module_02fd48d8`00000058
Built by: 7600.16385.amd64f... Read more

http://www.sevenforums.com/bsod-help-support/158624-ntoskrnl-exe-causing-lot-bsod.html
Relevancy 69.23%

It happen 3 to 5 minutes after turn on. Please help.

A:BSOD causing by Ntoskrnl.exe

I'm having the exact same problem. I am going to create a thread too with some crash dumps and hopefully someone can help me out

http://www.sevenforums.com/bsod-help-support/375692-bsod-causing-ntoskrnl-exe.html
Relevancy 68.37%

Note Please disregard what it says under quot My System Specs quot for this post This post is about a different computer I bought a Toshiba Satellite C D-S laptop a couple of weeks ago It came with Windows -bit pre-installed Every now and then the laptop gets a Blue Screen of Death with a quot system service exception quot error message The BSOD doesn't appear during just one specific event It has appeared at different times while doing different things surfing the web running Windows Explorer etc I've run Blue Screen View on the minidump file that was produced by this error and it points to the ntoskrnl exe driver as the cause of the crash I've attached the output from Blue Screen View as a jpg file titled quot BlueScreenViewOutput quot The original minidump file which is in the quot SF - - zip quot zip folder is also attached in case anyone wants to run it through their ntoskrnl.exe causing system_service_exception BSOD own debugger Other than Windows updates there isn't any software installed on the computer other than what was pre-installed by Toshiba I have ntoskrnl.exe causing system_service_exception BSOD however removed all of the Norton and WildTangent software that came with the laptop I've also updated the video driver to its most current version through the video card manufacturer's AMD website Also the BIOS is up-to-date I've also run a memory test and quot sfc scannow quot but neither came up with any errors Running an error check on the drive didn't produce any problems either I've already attempted to restore the laptop back to its factory state but I ended up getting the same blue screen after a couple of days I'm out of ideas If anyone has any suggestions or if you need more information let me know Thank you in advance

A:ntoskrnl.exe causing system_service_exception BSOD

Some more info to add:

I tried booting into Safe Mode to see if I still get a BSOD. I do, along with the same "System_Service_Exception" error message. I also reseated the RAM and ran another memory test, this time with Memtest86+ (I used "Windows Memory Diagnostic" before). Once again, the test showed no errors.

I've attached another minidump file, but this time with all of the info that is collected using the "SF Diagnostic Tool" that Windows Seven Forums provides.

http://www.eightforums.com/bsod-crashes-debugging/20916-ntoskrnl-exe-causing-system_service_exception-bsod.html
Relevancy 68.37%

Hello,
i've been having repeated problems with my PC, with it either failing to boot properly, hanging at the logon screen, not loading the desktop properly or just having BSOD's everytime I get into some high RAM usage. I'm on Windows 7. The zipped files requested are attached. 
 
Operating System - Windows 7 Ultimate N 64-bit SP1 x64
 - full retail, installed on custom PC.  date of install 03/12/2014
 
CPU - Intel Core i7 4790K (i think mobo is running it at 4.4 GHz)
GPU - Gigabyte GTX 970
Mobo - Gigabyte Z97-Gaming GT
PSU - Corsair RM650W
 
Custom Desktop build.
 
- other points of note- when the PC hangs on logonscreen/crashes for a BSOD - there is a loud buzzing noise. 
 
 
All help is very much appreciated,
 
Thanks,
Vishmister

http://www.bleepingcomputer.com/forums/t/624173/ntoskrnlexe-driver-causing-bsod/
Relevancy 68.37%

Note: I was unable to get a log with perfmon /report because it would run endlessly.
 
 
 
The crash seems to just happen randomly as far as I can tell.
 
· OS - Windows 10
· x64
· Original OS installed - Windows 10
· The OS is OEM
· Computer is no older than one year
· OS was installed after building the computer and has never been re-installed
 
 
 
· Intel I5 4460· Nvidia GTX 1070· ASRock H97M PRO4· EVGA SuperNOVA 750 B2, 80+ BRONZE 750W
· Desktop
 
 
 
 

http://www.bleepingcomputer.com/forums/t/627762/ntoskrnlexe-causing-windows-to-get-bsod/
Relevancy 68.37%

Hi, i was given a laptop by a friend about a week ago, its a DELL Vostro 1500.
i was told that it "crashed" randomly, when i had it it had vista.

the sticker on the laptop says "core 2 duo" but the actual processor was a celeron!

so, my first port of call was throwing a core 2 duo in, this worked well for about a day until it bsoded again. (The processor i put in was a core 2 duo that came with the original vostro.)

I then put a new HDD in and installed windows 7 pro but the bsods are still here.

I have attached the minidumps that have ocurred during the past day or so.

They all point to ntoskrnl.exe but i am not sure where to go from here.

Thanks, Elis
Attachment 87418

A:ntoskrnl.exe causing BSOD Windows 7

Hi Ellis and welcome to the forum. There are no mini dumps attached. How to upload your dump files - http://www.sevenforums.com/tutorials...en-forums.html

http://www.sevenforums.com/bsod-help-support/99775-ntoskrnl-exe-causing-bsod-windows-7-a.html
Relevancy 68.37%

Hello all,

Relative computer noob that somehow built his own computer a few years ago lol. Recently I have been getting the dreaded BSOD almost everytime I play BF3, and I am finally deciding to try to get some help on the matter. The causes seem to vary however I've noticed that ntoskrnl.exe seems to be the culprit more often than not. Again, I'm somewhat of a computer noob so I'm not too sure what to really make of all the dmp files, to say I'm confused would be a huge understatement. I've uploaded my dmp file with this post, and if anyone could chime in on what I should do I would greatly appreciate it.

Thanks!

As far as system specs
Gigabyte 880UD-3H
Phenom 1055t
HD 6870
8gb ram
Windows 7 64bit OEM version

A:BSOD when playing BF3. ntoskrnl.exe seems to be causing it?

Hi deltax,

Majority of the crashes seem to be caused by the 'ntkrnlmp.exe' driver.
Driver Description: NT Kernel & System - Different versions/date stamps according to OS and system specifications
The driver installs with 'Windows updates'.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 4A, {75732e09, 2, 0, fffff8800a3daca0}

Probably caused by : ntkrnlmp.exe ( nt!KiSystemServiceExit+245 )

Followup: MachineOwner
---------

3: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

IRQL_GT_ZERO_AT_SYSTEM_SERVICE (4a)
Returning to usermode from a system call at an IRQL > PASSIVE_LEVEL.
Arguments:
Arg1: 0000000075732e09, Address of system function (system call routine)
Arg2: 0000000000000002, Current IRQL
Arg3: 0000000000000000, 0
Arg4: fffff8800a3daca0, 0

Debugging Details:
------------------


PROCESS_NAME: AvastSvc.exe

BUGCHECK_STR: RAISED_IRQL_FAULT
Another driver that seems to be causing trouble is 'dxgmms1.sys' (DirectX Graphics MMS), which also installs itself via 'Windows Updates'.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1000007E, {ffffffffc0000005, fffff8800533ecee, fffff880021bd6a8, fffff880021bcf00}

Probably caused by : dxgmms1.sys ( dxgmms1!VIDMM_GLOBAL::ReferenceAllocationForPreparation+22 )

Followup: MachineOwner
---------

4: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e)
This is a very common bugcheck. Usually the exception address pinpoints
the driver/function that caused the problem. Always note this address
as well as the link date of the driver/image that contains this address.
Some common problems are exception code 0x80000003. This means a hard
coded breakpoint or assertion was hit, but this system was booted
/NODEBUG. This is not supposed to happen as developers should never have
hardcoded breakpoints in retail code, but ...
If this happens, make sure a debugger gets connected, and the
system is booted /DEBUG. This will let us see why this breakpoint is
happening.
Arguments:
Arg1: ffffffffc0000005, The exception code that was not handled
Arg2: fffff8800533ecee, The address that the exception occurred at
Arg3: fffff880021bd6a8, Exception Record Address
Arg4: fffff880021bcf00, Context Record Address

The following 'Windows update' has failed to install numerous times; which may have an i... Read more

http://www.sevenforums.com/bsod-help-support/281841-bsod-when-playing-bf3-ntoskrnl-exe-seems-causing.html
Relevancy 68.37%

I recently purchased a Gigabyte R9 290X which i installed into my custom built computer to replace the R9 270X. The previous card ran fine and i had no problems with. Obviously before installing the new card i ran DDU (Display driver uninstaller) to remove the previous drivers. After installing and powering the PC up, i installed the latest catalyst software, pretty sure its 14.9, but since then it randomly blue screens.

I have tried older drivers, MEMtest, checking for faults in my SSD and HDD.

I also ran FurMark at benchmark for 15 minutes to check for over heating etc. and the card ran fine and didnt crash for the entire 15 minutes, it then crashed sitting on the windows start page.

Any help would be greatly appreciated.

A:New GPU causing 'ntoskrnl' BSOD randomly

Most of the BSODs are related to this Stop 0x124, so have alook here:

Stop 0x124 - what it means and what to try

While I know how annoying it is to RMA, I think if you can at all you should because graphic cards are temperamental at their best imo.

EDIT
Here are some more ideas.
The first thing I would do is check if the extra power supply is definitely connected to the card and working, and that the temps on card are all normal.

Then I would try using verifier.exe to stress the Ati drivers and see if it's them. But I'm not sure on this because say it is the Ati driver- I think it could happen that stressing a different driver causes the Ati one to trip up. Regardless if verifier.exe doesn't cause any problems I think it is then more likely the card has a fault. If verifier.exe does give you the BSOD, I suppose look for updated BIOS of the card and the latest Catalyst.

There are others with similar problem, multiple suggestions on this page:

AMD Support and Game Forums - Sapphire R9 290 BSOD

Here are 2 from there that are probably worth a punt:
1.
"What worked for me...
1. Uninstalled Catalyst Control Center (CCC).
2. Disabled Hardware Acceleration in Adobe Flash (mainly used for YouTube)."

2.
"I had the same problem as you for the longest time. I tried everything. New ram, fresh windows install, different drivers. Nothing worked. Then I ran Afterburner and went into Settings>General> and checked the box labelled Force Constant Voltage. This fixed it. I havn't had a BSOD in over a month, before they were happening multiple times per day. Apparently the issue is caused by the voltage changing so quickly that the motherboard enacts a failsafe to protect it from damage. Constant voltage may use more power but it works, and its not going to hurt your components."

I know how annoying these BSODs are, best of luck.

http://www.sevenforums.com/bsod-help-support/351321-new-gpu-causing-ntoskrnl-bsod-randomly.html
Relevancy 67.51%

Okay, so I have recently started getting random BSOD errors randomly, from playing minecraft, to microsoft word. I have used Blue Screen Viewer and it has found that Wdf01000.sys and ntoskrnl.exe are causing them. I have attached the minidump to this thread. Please respond. Thanks for your help!

A:Random BSOD, Wdf01000.sys and ntoskrnl.exe seem to be causing them.

I just got another BSOD error and have gotten more info on it.
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.48
Locale ID: 1033

Additional information about the problem:
BCCode: 10d
BCP1: 0000000000000005
BCP2: 0000000000000000
BCP3: 0000000000001202
BCP4: FFFFFA8009E2A260
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\112012-28657-01.dmp
C:\Users\Taylor\AppData\Local\Temp\WER-109356-0.sysdata.xml

http://www.sevenforums.com/bsod-help-support/265586-random-bsod-wdf01000-sys-ntoskrnl-exe-seem-causing-them.html
Relevancy 67.51%

Hello everyone Since yesterday I've started to get BSOD screens frequently I tried any tool I could find but it wouldn't do anything various ntoskrnl.exe BSOD messages error causing After further searches I've found using a dmp reading tool that my blue screens were caused by ntoskrnl exe Here are the dump files in text Code Dump File - - dmp Crash Time PM Bug Check String PAGE FAULT IN NONPAGED AREA Bug Check Code x Parameter fffff a Parameter Parameter fffff ecb a Parameter Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win ldr - Processor x Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time PM Bug Check String IRQL NOT LESS OR EQUAL Bug Check Code x a Parameter Parameter Parameter Parameter fffff ea Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe File Description NT Kernel amp ntoskrnl.exe causing various BSOD error messages System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win ldr - Processor x Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time PM Bug Check String IRQL NOT LESS OR EQUAL Bug Check Code x a Parameter Parameter Parameter Parameter fffff eaa Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win ldr - Processor x Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time AM Bug Check String KMODE EXCEPTION NOT HANDLED Bug Check Code x e Parameter ffffffff c Parameter fffff e cd Parameter Parameter ffffffff ffffffff Caused By Driver atikmdag sys Caused By Address atikmdag sys cc File Description Product Name Company File Version Processor x Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size These are only of them the other ones were from yesterday and disappeared As you can see the BSOD error messages are different Anyway I tried Googling but I can't find anyone with a similar problem to mine Thank you for helping me Edit I forgot to add the BSOD appears randomly Somtimes on the Windows logo booting screen sometimes after a few minutes or hours Even sometimes there's no BSOD screen at all it just completely freezes and I have to shut down my computer

A:ntoskrnl.exe causing various BSOD error messages

http://www.sevenforums.com/crashes-d...tructions.html

http://www.sevenforums.com/bsod-help-support/136376-ntoskrnl-exe-causing-various-bsod-error-messages.html
Relevancy 66.65%

hi, im getting random bsod errors mainly by ntoskrnl.exe and also i experience random freezing when i play games for around 10-20 mins. it freezes with a distorted sound.

attached dump files. please take a look.

Relevancy 66.22%

Hello

My computer BSOD about 9-10 times a day and it's quite annoying.
Here is what I tried:
1. Upgraded from windows 7 to windows 10
2. Ran memtest - RAM had about 30 problems but then I put the ram in another computer and ran the test there-> 0 errors
3. Updated GPU drivers
4. Ran scannow from command prompt ->no problems

I attached the minidump of one of the most common type of BSOD(by ntoskrnl.exe)

Can someone please identify the problem? Im clueless about BSOD. Thank you

A:ntoskrnl.exe causing BSOD at random times , error 0x0000003b

Hi SmithyBoy,

I'll go deeper on the memtest part.
Did you run memtest on each stick in each used slot separated from the other sticks?

Please fill in your system specsPlease follow this tutorial and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely.How to fill in your system specs:

http://www.tenforums.com/bsod-crashes-debugging/35161-ntoskrnl-exe-causing-bsod-random-times-error-0x0000003b.html
Relevancy 64.5%

I've got a new Laptop with Windows 8, after upgrading to Win 8.1 and installing Fujitsu Drivers and some Software many BSOD occur, saying
PAGE_FAULT_IN_NONPAGED_AREA ntoskrnl.exe
or
PAGE_FAULT_IN_NONPAGED_AREA hal.dll.

Attached is the SF file,
Thanks for your help

trailracer

A:Win 8.1 multiple BSOD hal.dll, ntoskrnl.exe

Drivers that must be updated or removed:


Code:
1: kd> lmvm fcrimg4
start end module name
fffff800`019b5000 fffff800`019c4000 fcrimg4 (deferred)
Image path: fcrimg4.sys
Image name: fcrimg4.sys
Timestamp: Fri Nov 13 08:02:43 2009 (4AFD58F3)
CheckSum: 00015429
ImageSize: 0000F000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4


Update or uninstall SecureDrive software.


Code:
1: kd> lmvm FUJ02B1
start end module name
fffff800`02aff000 fffff800`02b00e80 FUJ02B1 (deferred)
Image path: FUJ02B1.sys
Image name: FUJ02B1.sys
Timestamp: Wed Nov 01 05:50:43 2006 (45486DF3)
CheckSum: 000118FB
ImageSize: 00001E80
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4


Update the Fujitsu FUJ02B1 Device Driver, or uninstall it completely from the machine.


Code:
2: kd> lmvm rtcrfilt64
start end module name
fffff800`013f0000 fffff800`013f9000 rtcrfilt64 (deferred)
Image path: \SystemRoot\System32\drivers\rtcrfilt64.sys
Image name: rtcrfilt64.sys
Timestamp: Thu Dec 01 04:43:09 2011 (4ED74C2D)
CheckSum: 0001014D
ImageSize: 00009000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4


Driver Reference Table - rtcrfilt64.sys

You should also update the Realtek HD Audio codec driver to newest (pay attention to installer's instructions):


Code:
2: kd> lmvm RTKVHD64
start end module name
fffff800`02a72000 fffff800`02e5e500 RTKVHD64 (deferred)
Image path: \SystemRoot\system32\drivers\RTKVHD64.sys
Image name: RTKVHD64.sys
Timestamp: Mon Aug 27 01:57:17 2012 (503B0C3D)
CheckSum: 003FD45C
ImageSize: 003EC500
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

http://www.eightforums.com/bsod-crashes-debugging/39055-win-8-1-multiple-bsod-hal-dll-ntoskrnl-exe.html
Relevancy 64.5%

Hello So I've recently created my own custom build computer and have had multiple BSoD's to the point of me worrying frantically as to why they're reoccurring with higher frequency ntoskrnl.exe - Multiple BSoD's The activities I usually participate in which BSoD's happen are Watching YouTube videos sometimes have Multiple BSoD's - ntoskrnl.exe more than two open in separate Google Chrome tabs Opening multiple tabs in Google Chrome Not always the case - tabs open as I'm typing this Playing games such as League of Legends RuneScape or Mortal Kombat Leaving the computer idle or in Sleep Mode I've tried Re-installing Windows Professional x Using BlueScreenView to identify the fault finding that three of four BSoD's since re-installation of Windows were caused by quot ntoskrnl exe quot whilst one was caused by quot Ntfs sys quot and quot ntoskrnl exe quot Running Memtest for Passes with no errors Running a Visual Memory Stress test Running Malwarebytes and CCleaner along with Multiple BSoD's - ntoskrnl.exe avast Antivirus to no avail Updating all known Drivers I can possibly think of probably missing a ton Checking for new Windows Updates - I have SP and there are no new updates available BSoD's so far This list by the looks of it is going to get much worse - - dmp - - SYSTEM SERVICE EXCEPTION - x b - - dmp - - MEMORY MANAGEMENT - x a - - dmp - - NTFS FILE SYSTEM - Multiple BSoD's - ntoskrnl.exe x - - dmp - - PAGE FAULT IN NONPAGED AREA - x - - dmp - - PAGE FAULT IN NONPAGED AREA - x - - dmp - - MEMORY MANAGEMENT - x a - - dmp - - MEMORY MANAGEMENT - x a - - dmp - - PAGE FAULT IN NONPAGED AREA - x Side Note I've been noticing Google Chrome Adobe Shockwave crashing regularly and tabs reverting to quot Aw Snap quot whilst games crash either mid-way after automatic closure League of Legends or manual closure I've even had League of Legends tell me my client files may be corrupt and ask me to repair my installation has never had that issue before Something really is wrong and I am at my wits end with this All computer hardware components are new except for speakers and my headset and this has been happening daily for the past week If anyone can shed some light on the situation I'm not much of a computer guru I'd be over the moon

A:Multiple BSoD's - ntoskrnl.exe

Seems I just had another BSoD, involving "ntoskrnl.exe" and "win32k.sys" with the Bug Check String "PAGE_FAULT_IN_NONPAGED_AREA" - 0x00000050

I was playing RuneScape whilst watching a YouTube video this time, about five tabs in Google Chrome (mostly this forum).

I updated the main post list of BSoD's, but I'll attach the .zip file made by dm log collector in this post as I don't know if replacing the old .zip will delete any information needed of the previous BSoD's.

http://www.sevenforums.com/bsod-help-support/334137-multiple-bsods-ntoskrnl-exe.html
Relevancy 64.5%

Hi guys!Made a fresh Win10 install with just basic software (Like whocrashed)I have tried using the Guru3Ds tool to remove all traces of old video card drivers and installed the newest ones without any extra software or bloatware.Have ran Memtest for 24 hours without a fault.I am still getting BSODs from ntoskrtnl all the time.Any pointers?

http://www.bleepingcomputer.com/forums/t/625432/multiple-ntoskrnl-bsod/
Relevancy 64.5%

hi
laptop model: msi gt70 dragon edition 2

Happens randomly please help .

A:Multiple BSOD ntoskrnl.exe win 8.1

Only 22 Windows Updates installed. Most systems have 60 or more. Please visit Windows Update and get ALL available updates (it may take several trips to get them all).

At times the Killer Network Manager may cause BSOD problems:





NOTE: See this link first: BSOD while playing on msi gt70 dragon edition 2 (thanks to kaelaan) It appears that the Killer Service problem was solved with the latest release of the Qualcomm versions of the drivers (so try updating to a version dated from later in 2014).




The Qualcomm Atheros Killer Service/KillerNetManager is known to cause BSOD's. Please follow the workaround instructions here:





First, open the Run dialog (Win + R keys) and type in "services.msc" (without the quotes) and press Enter
Scroll down and locate the "Qualcomm Atheros Killer Service" and right click on it. Select "Stop"
Right click on it again and this time select "Properties"
In the dropdown box for "Startup type", select "Disabled", then click on the "OK" button at the bottom of the window

Next, open Task Manager (right click on TaskBar and select "Task Manager")
Click on the "More details" dropdown (if present)
Click on the "Startup" tab
Scroll down and locate the "KillerNetManager" entry, right click on it and select "Disable"
There may also be an Install Shield (with the Killer gaming K next to it), if so Right click on it and select "Disable"
Finally, restart the system in order for the changes to take affect.



At times the Killer Network Manager will continue to load. If so, it's usually listed in the MSINFO32...Software Environment...Startup Programs section. If it is, please try this:





It may be that the instructions aren't stopping everything.
In some cases, there's a program running out of the Program Files/Program Files (x86) directory.
"c:\program files\qualcomm atheros\killer network manager\killer~1.exe" (NOTE: killer~1.exe is most likely killernetmanager.exe)
In other cases, there's a program running out of c:\windows\installer\{Long string of letters, numbers, and dashes}\networkmanager.exe_130c27d738f34c89bddf21bcfd74b56d.exe (the long string of letters and numbers may change)

Here's some things to try
1) Please see if there are any entries in the Startup tab of Task Manager that are related to Qualcomm/Atheros/Killer Network Manager (and NOT the card itself) and disable them (please let us know what you find) Be careful as the wrong selection can disable the network card.
2) Check in "msconfig" for any entries that aren't in the Startup tab of Task Manager. Let us know if you find any Qualcomm/Atheros/Killer entries there (we'll disable them differently if they are there).
3) Locate the "c:\program files\qualcomm atheros\killer network manager\killer~1.exe" and rename the .exe to .BAD (the killer~1 is actually a filename that starts with killer and ends with .exe) There will be an error in event viewer, but it'll stop the bugger from loading.
4) Locate the "c:\windows\installer\{Long string of letters, numbers, and dashes}\networkmanager.exe_130c27d738f34c89bddf21bcfd74b56d.exe" entry and rename the last .exe to .BAD (the long string of letters and numbers may change)

Just FYI - here are the MSI workaround instructions: MSI USA











Out of 16 memory dumps there were 5 different BSOD error codes. The differing error codes are usually symptomatic of a lower level problem within the system. They are usually caused by one of these things:
- borked (broken) hardware (several different procedures used to isolate the problem device)
- BIOS issues (check for updates at the motherboard manufacturer's website)
- overclocking/overheating - You'll know if you're overclocking or not. If uncertain we... Read more

http://www.eightforums.com/bsod-crashes-debugging/46421-multiple-bsod-ntoskrnl-exe-win-8-1-a.html
Relevancy 64.5%

-Windows 7 64bit
-original os windows vista
-full retail version
-2008 hp pavilion
-windows 7 installed in 2011 after upgraded hard-drive and some other goodies
The computer was given to me by a friend who had no more use for it but decided to upgrade it before he did. I'm not sure how it was running before but i was soon to find out that it gets a lot of BOD's. Was planning to use it for school and don't have any money to buy a new one so any help would be appreciated Thanks!

A:multiple BSOD ntoskrnl.exe

Hello,

Start by flashing the latest BIOS for the machine, found here: Napa-GL8E Motherboard BIOS Update HP Pavilion a6500f Desktop PC - HP Customer Care (United States - English)

Your Broadcom wireless adapter drivers were blamed multiple times. Unfortunately, HP has not released updated ones on their site, but you can probably get away with installing ones from another manufacturer. Dell has some here: Drivers and Downloads

More than likely, the Dell installer will error out as it realizes you do not have a Dell card. However, if you cancel the installer after the files have finished extracting, you can then manually install the drivers using Device Manager. Enter "devmgmt.msc" into the start menu, right-click on the wireless adapter, and select "update driver software". Select "Browse my computer...", and choose the location the drivers were extracted to. By default, the extraction will take place in C:\dell\drivers\R258276.
Code:
bcmwl664.sys Tue Jul 07 20:45:04 2009 (4A53EC10)
Windows 7 SP1 should be installed: Learn how to install Windows 7 Service Pack 1 (SP1)

Also:
Code:
Event[2928]:
Log Name: System
Source: Display
Date: 2011-08-16T18:55:17.000
Event ID: 4101
Task: N/A
Level: Warning
Opcode: Info
Keyword: Classic
User: N/A
User Name: N/A
Computer: Viv-PC
Description:
Display driver nvlddmkm stopped responding and has successfully recovered.
Install updated nVidia display drivers from here: Drivers - Download NVIDIA Drivers
Code:
nvlddmkm.sys Thu May 14 16:48:07 2009 (4A0C8387)
That's all the software causes I can see (at least for now). If the BSODs persist, upload a fresh jcgriff2 report, and based on that, we may start running hardware diagnostics or try to address other software issues.

...Summary of the dumps:

Code:

Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Fri Aug 12 23:35:28.928 2011 (UTC - 4:00)
System Uptime: 0 days 0:29:21.175
*** ERROR: Module load completed but symbols could not be loaded for usbhub.sys
*** ERROR: Symbol file could not be found. Defaulted to export symbols for USBPORT.SYS -
Probably caused by : usbhub.sys ( usbhub+129ec )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0xFE
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0xFE_usbhub+129ec
BiosReleaseDate = 03/28/2008
SystemProductName = KQ495AA-ABA a6500f
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Fri Aug 12 23:48:24.301 2011 (UTC - 4:00)
System Uptime: 0 days 0:02:55.548
*** WARNING: Unable to verify timestamp for bcmwl664.sys
*** ERROR: Module load completed but symbols could not be loaded for bcmwl664.sys
Probably caused by : bcmwl664.sys ( bcmwl664+1b0d3 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0xD1
PROCESS_NAME: ccSvcHst.exe
FAILURE_BUCKET_ID: X64_0xD1_bcmwl664+1b0d3
BiosReleaseDate = 03/28/2008
SystemProductName = KQ495AA-ABA a6500f
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Fri Aug 12 23:44:49.650 2011 (UTC - 4:00)
System Uptime: 0 days 0:08:41.898
*** WARNING: Unable to verify timestamp for bcmwl664.sys
*** ERROR: Module load completed but symbols could not be loaded for bcmwl664.sys
Probably caused by : bcmwl664.sys ( bcmwl664+98062 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0xA
PROCESS_NAME: ccSvcHst.exe
FAILURE_BUCKET_ID: X64_0xA_bcmwl664+98062
BiosReleaseDate = 03/28/2008
SystemProductName = KQ495AA-ABA a6500f
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16841.amd64fre.win7_gdr.110622-1503
Debug session time: Thu Sep 8 17:53:36.494 2011 (UTC - 4:00)
System Uptime: 0 days 0:01:13.741
Probably caused by : ntkrnlmp.exe ( nt!KeWaitForSi... Read more

http://www.sevenforums.com/bsod-help-support/185593-multiple-bsod-ntoskrnl-exe.html
Relevancy 63.64%

Hi, I have been having a lot of problems with my computer today and yesterday.

Initially my comp would just crash and i would have to power off to reboot. Now im getting BSODs instead, i have tried to work out the cause of these by myself but they all apear to be caused by different problems. I have looked at a lot of other BSOD threads and i have used verifier.exe which created one of the memdumps.

I seem to get them whilst playing games such as lol or fallout or watching youtube videos, but sometimes i have had them for no reason at startup. I have done a fair amount of virus and malware scanning just incase it was somthing like that but its most probably a driver?

i have uploaded the BSOD files,

thanks in advance.

A:Multiple BSOD - appears to be from ntoskrnl.exe - help please

Two issues

1-Dtsoftbus01.sys Driver verified and one of the issues
Please remove any CD visualization programs such as Daemon Tools and Alcohol 120%.

They use a driver, found in your dmp, called sptd.sys, that is notorious for causing BSODs.

Use this SPTD uninstaller DuplexSecure - Downloads DuplexSecure - FAQ

when you're done you can use this Freeware:

MagicISO Virtual CD/DVD-ROM (MagicDisc) in its place

Using MagicISO to create ISO image files

2-Symantec. Caused at least 2 of these.

Symantec is a frequent cause of BSOD's. I would remove and replace it with Microsoft Security Essentials AT LEAST TO TEST
http://us.norton.com/support/kb/web_...080710133834EN

Microsoft Security Essentials - Free Antivirus for Windows

http://www.sevenforums.com/bsod-help-support/230578-multiple-bsod-appears-ntoskrnl-exe-help-please.html
Relevancy 63.64%

Since I've installed my new graphics card I get allot more blue screens.
I attached the file with all my minidump files. Made with SF_Diagnostic Tool.
If someone could help me out I would greatly appreciate it.

If you need to know more about my system, I will try to reply to messages as soon as possible.

A:Multiple BSOD causes, mostly ntoskrnl.exe errors.

Multiple errors, but none of them are pointing to GPU directly.

Code:
BugCheck A, {10, 2, 0, fffff800034ac103}

Probably caused by : memory_corruption ( nt!MiReplenishPageSlist+73 )

Followup: MachineOwner
-------------------------------------------------------------------------
BugCheck 3B, {c0000005, fffff80003485ebe, fffff8800b47b7f0, 0}

Probably caused by : ntkrnlmp.exe ( nt!KeWaitForMultipleObjects+3e )

Followup: MachineOwner
--------------------------------------------------------------------------
BugCheck 1E, {0, 0, 0, 0}

Probably caused by : hardware ( USBPORT!USBPORT_Core_iIrpCsqCompleteDoneTransfer+2e8 )

Followup: MachineOwner
--------------------------------------------------------------------------
BugCheck D1, {fffffa7f929efd8c, 2, 0, fffff88004355fd0}

Probably caused by : USBPORT.SYS ( USBPORT!USBPORT_Core_DecIoRequestCount+14 )

Followup: MachineOwner
---------
So the most consistent error is USBPORT .... and some additional info about it are:

DEVICEPNP DEVICE ID ERROR CODEUniversal Serial Bus (USB) Controller PCI\VEN_1B6F&DEV_7023&SUBSYS_50071458&REV_01\4&3694E160&0&00A9 The drivers for this device are not installed.Universal Serial Bus (USB) Controller PCI\VEN_1B6F&DEV_7023&SUBSYS_50071458&REV_01\4&C70CB9A&0&0048 The drivers for this device are not installed.
The best to do is a clean reinstall. But before doing that, make it sure that the hardware are working properly.

Test your RAM modules for possible errors; as the BSOD points to memory corruption, too.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.
If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Stress test the Graphics Card using Furmark; as you have doubt.
Video Card - Stress Test with Furmark

Then, go for a Clean Reinstall - Factory OEM Windows 7, which works equally good for retail, too.

http://www.sevenforums.com/bsod-help-support/313311-multiple-bsod-causes-mostly-ntoskrnl-exe-errors.html
Relevancy 63.64%

Hello a month or so ago just couple of months after I bought a new PC pretty decent expensive for my country I started to experience a lot of BSODs only at the time I started any game or any video file Sometimes I could play for - hours or watch a video sometimes it crashes - minutes after I start a game It works fine while I keep browsing internet in Mozilla though First I thought my main drive - SSD crashed - we unplugged it and tried to work on my older HDDs which I kept from my old PC Same problem We re-installed Windows multiple caused ntoskrnl.exe by BSOD multiple times it kept showing the problem Usually it does not start right after some new action was taken - like If I change HDD and multiple BSOD caused by ntoskrnl.exe install a new windows here a day two maybe it works ok with no BSODs at all BlueScreenView shows mostly always cant recon a different result a problem with ntoskrnl exe Once I thought my memory was an issue but - circles of Memtest didn't show any problems at all I run the latest drivers for my graphics card nvidia geforce gtx ti and I don't know wheter my video card can cause the problem What I know is thats its definetely not the HDD or probably my memory so I can only think about motherboard or graphics card problems And to be clear at first my PC just got stuck in games and I had to reboot it sometimes graphics in games crashed like flashing or everything was very smooth blur sorry for my english and a week or two after it started to give me BSOD all the time in games videos I used Win driver verifier and as expected multiple BSOD caused by ntoskrnl.exe everything was clear I'm not good at technical side of the issue but getting a little bit desperate to find a solution I decided to ask for help from the pro's here are multiple BSOD caused by ntoskrnl.exe my dumps of BlueScreenView Dump File - - dmp Crash Time Bug Check String IRQL NOT LESS OR EQUAL Bug Check Code x a Parameter Parameter Parameter Parameter fffff ece Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe c File Description NT Kernel amp System Product Name Microsoft reg Windows reg Operating System Company Microsoft Corporation File Version win gdr - Processor x Crash Address ntoskrnl exe c Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time Bug Check String IRQL NOT LESS OR EQUAL Bug Check Code x a Parameter Parameter Parameter Parameter fffff ece Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe c File Description NT Kernel amp System Product Name Microsoft reg Windows reg Operating System Company Microsoft Corporation File Version win gdr - Processor x Crash Address ntoskrnl exe c Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time Bug Check String PFN LIST CORRUPT Bug Check Code x e Parameter Parameter eb ae Parameter Parameter Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe c File Description NT Kernel amp System Product Name Microsoft reg Windows reg Operating System Company Microsoft Corporation File Version win gdr - Processor x Crash Address ntoskrnl exe c Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time Bug Check String IRQL NOT LESS OR EQUAL Bug Check Code x a Parameter Parameter Parameter Parameter fffff abece Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe c File Description NT Kernel amp System Product Name Microsoft reg Windows reg Operating System Company Microsoft Corporation File Version win gdr - Processor x Crash Address ntoskrnl exe c Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Siz... Read more

https://social.technet.microsoft.com/Forums/en-US/4c1f66a5-899f-47b6-bea4-8a98576e1128/multiple-bsod-caused-by-ntoskrnlexe?forum=w7itproperf
Relevancy 63.64%

Hey guys first time posting from ntoskrnl.exe, errors multiple BSOD here but I found a lot of good information in my BSOD research so figured I should go ahead and make a thread Computer is a few years old a home build running Windows Home Premium x Haven't really had too many problems other than the occasional BSOD or random restart but it's gotten a lot worse lately so I wanna get to the bottom of BSOD from ntoskrnl.exe, multiple errors it The two errors I've gotten are Memory Management and System Service Exception both seem to be linked to the ntoskrnl exe file I also ran the System File Checker and got the following error reported quot Cannot repair member file l quot kerberos dll quot of Microsoft-Windows-Security-Kerberos quot BSOD from ntoskrnl.exe, multiple errors Lastly I ran the windows memory diagnostic and it detected several hardware errors My conclusion from all this and what I've read so far is I will probably have to do at least one of three things A system restore to a couple weeks ago Repair the system OS with my Win disc Replace the RAM Wanted to post here before I try any of those though Whew ok sorry to be long winded but wanted to provide as much info as possible

A:BSOD from ntoskrnl.exe, multiple errors

Quote:
Lastly I ran the windows memory diagnostic and it detected several hardware errors.


This explains your issue, to further confirm that run a full RAM Test with Memtest86+
RAM - Test with Memtest86+

If errors are detected you should replace your RAM modules.

http://www.sevenforums.com/bsod-help-support/218107-bsod-ntoskrnl-exe-multiple-errors.html
Relevancy 63.64%

On win 7 x64, on differents machines HP8100 SFF, DC7800SFF, I get randomly BSOD, all caused
by the file ntoskrnl.exe.
As attach the diagnostic results file on a HP8100.
I think it is a driver issue (old version? incompatible?)
Thanks for your analyse.

A:BSOD - multiple caused by ntoskrnl.exe

Code:
BugCheck 3B, {c0000005, fffff80002ad9e57, fffff880076dea10, 0}

Probably caused by : memory_corruption ( nt!MiPfnShareCountIsZero+77 )

Code:
Usual causes: System service, Device driver, graphics driver, memory

Code:
1: kd> !error 00000000c0000005
Error code: (NTSTATUS) 0xc0000005 (3221225477) - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
memory_corruption doesn't necessary mean that a RAM module is faulty, it can also point to a object which corrupted the RAM at the time of the crash, for instance a corrupted driver or program. Paging files and the CPU caches can also be causes.

Follow these steps -

Test for any corrupted drivers, by running Driver Verifier for least 24 hours, stop the test if a BSOD occurs before this time frame. Driver Verifier will place stress on the drivers within your system, which will cause corrupted drivers to crash and hopefully be pinpointed.Driver Verifier - Enable and Disable
More Help and Information with Driver Verifier - Using Driver Verifier to identify issues with Drivers

Memory:RAM - Test with Memtest86+
Run Memtest86+ for least 7-8 passes, and preferably overnight as it can take a while to fully complete.

Test each RAM stick individually, if an error is found then move the same RAM stick into the next DIMM slot and test again, if errors are found for the same RAM stick in every available slot then you have a faulty RAM module. On the other hand, if no errors are found in the next slot or the other slots for the same RAM module, then you have a faulty DIMM slot.

Test each RAM stick and every motherboard DIMM slot available.

http://www.sevenforums.com/bsod-help-support/279579-bsod-multiple-caused-ntoskrnl-exe.html
Relevancy 63.64%

Please help. I have a ASUS G750JX Laptop and I am having multiple BSOD per day many I think due to ntoskrnl.exe+15c4e9 at least that is what I am seeing in BlueScreenView. But I am also seeing BSOD from ntoskrnl.exe+303100, ntoskrnl.exe+15ace9, hal.dll+669a and others. I have no idea how to interpret this. I have attached the zip file created with DM Log Collector.

I ran a memory test using memtest86 and found no issues with the memory. I am not overclocking. My idle CPU temp is around 46 C, motherboard temp 47 C, GFX card temp 39 C.

I have updated Norton and ran a scan and found nothing.

Asus is telling me to do a full restore which would result in loosing all my data and software installs so I would rather find the issue and fix it.

Any help is greatly appreciated.

A:Multiple BSOD ntoskrnl.exe+15c4e9 and others

These crashes mostly happen when coming out of a sleep or screen saver state but happen even though the computer is not coming out of sleep.

http://www.eightforums.com/bsod-crashes-debugging/58245-multiple-bsod-ntoskrnl-exe-15c4e9-others.html
Relevancy 63.64%

Hello a month or so ago just couple of months after I bought a new PC pretty decent expensive for my country I started to experience a lot of BSODs multiple by ntoskrnl.exe caused BSOD only at the time I started any game or any video file Sometimes I could play for - hours or watch a video multiple BSOD caused by ntoskrnl.exe sometimes it crashes - minutes after I start a game It works fine while I keep browsing internet in Mozilla though First I thought my main drive - SSD crashed - we unplugged it and tried multiple BSOD caused by ntoskrnl.exe to work on my older HDDs which I kept from my old PC Same problem We multiple BSOD caused by ntoskrnl.exe re-installed Windows multiple times it kept showing the problem Usually it does not start right after some new action was taken - like If I change HDD and install a new windows here a day two maybe it works ok with no BSODs at all BlueScreenView shows mostly always cant recon a different result a problem with ntoskrnl exe Once I thought my memory was an issue but - circles of Memtest didn't show any problems at all I run the latest drivers for my graphics card nvidia geforce gtx ti and I don't know wheter my video card can cause the problem What I know is thats its definetely not the HDD or probably my memory so I can only think about motherboard or graphics card problems And to be clear at first my PC just got stuck in games and I had to reboot it sometimes graphics in games crashed like flashing or everything was very smooth blur sorry for my english and a week or two after it started to give me BSOD all the time in games videos I used Win driver verifier and as expected everything was clear I'm not good at technical side of the issue but getting a little bit desperate to find a solution I decided to ask for help from the pro's here are my dumps of BlueScreenView Dump File - - dmp Crash Time Bug Check String IRQL NOT LESS OR EQUAL Bug Check Code x a Parameter Parameter Parameter Parameter fffff ece Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe c File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win gdr - Processor x Crash Address ntoskrnl exe c Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time Bug Check String IRQL NOT LESS OR EQUAL Bug Check Code x a Parameter Parameter Parameter Parameter fffff ece Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe c File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win gdr - Processor x Crash Address ntoskrnl exe c Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time Bug Check String PFN LIST CORRUPT Bug Check Code x e Parameter Parameter eb ae Parameter Parameter Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe c File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win gdr - Processor x Crash Address ntoskrnl exe c Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time Bug Check String IRQL NOT LESS OR EQUAL Bug Check Code x a Parameter Parameter Parameter Parameter fffff abece Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe c File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win gdr - Processor x Crash Address ntoskrnl exe c Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time B... Read more

A:multiple BSOD caused by ntoskrnl.exe

Minidumps have been created they are referenced in your copy/paste logs there.
Could you follow these.

http://www.sevenforums.com/crashes-d...tructions.html

http://www.sevenforums.com/bsod-help-support/181184-multiple-bsod-caused-ntoskrnl-exe.html
Relevancy 63.64%

Hello this is my first time posting in a forum such as this so please forgive me for any fault in etiquette My issue is that my laptop has been continuously crashing with BSOD errors ntoskrnl.exe, BSOD's by Multiple help! caused for seemingly no reason My original configuration was in windows and started experiencing repeated crashes after I received the laptop back from repairs Keep in mind it is only year old Multiple BSOD's caused by ntoskrnl.exe, help! though now out of warranty I wiped the OS and installed a fresh copy of Windows Ultimate ive been meaning to do this for a while and the errors were Multiple BSOD's caused by ntoskrnl.exe, help! all the encouragement i needed Despite installing all windows updates lenovo updates and checking all drivers these BSOD errors continue to occur I cant even begin to narrow down on the issue as i feel like ive experienced every error type there is The list is currently at UNEXPECTED KERNAL MODE TRAP PAGE FAULT IN NONPAGED AREA IRQL NOT LESS OR EQUAL DRIVER IRQL NOT LESS OR EQUAL SYSTEM THREAD EXCEPTION NOT HANDLED SYSTEM PTE MISUSE KMODE EXCEPTION NOT HANDLED i have included the dump information from bluescreenview and CPU-Z computer information for reference Please let me know if there is anything else i need to Multiple BSOD's caused by ntoskrnl.exe, help! provide Thank you for any help I am in dire need of assistance as i have an honors thesis to complete in a few weeks and my only other computer is a mac with a corrupted battery

A:Multiple BSOD's caused by ntoskrnl.exe, help!

Additional information is required.

1. Download the DM Log Collector application to your desktop by clicking the link below

DM Log Collector.exe

2. Run it by double-clicking the icon on your desktop, and follow the prompts.
3. Locate the .ZIP file that is created on your desktop, and upload it here in your next reply.

http://www.sevenforums.com/bsod-help-support/348459-multiple-bsods-caused-ntoskrnl-exe-help.html
Relevancy 63.64%

My pc keeps bsod not sure the issue and am not good enough to figure the issue out I did get the following from the minidump the following is a skydrive to the dump Thanks https drv multiple a times day (ntoskrnl.exe) BSOD ms u BSOD multiple times a day (ntoskrnl.exe) s AuO BSOD multiple times a day (ntoskrnl.exe) d Dv rkGgTHSMzvQlwngoE e Microsoft R Windows Debugger Version AMD Copyright c Microsoft Corporation All rights reserved Loading Dump File C Windows Minidump - - dmp Mini Kernel Dump File Only registers and stack trace are available Symbol search path is Invalid Symbol loading may be unreliable without a symbol search path nbsp nbsp nbsp nbsp nbsp Use symfix to have the debugger choose a symbol path nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp After setting your symbol path use reload to refresh symbol locations Executable search path is nbsp Symbols can not be loaded because symbol path is not initialized nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp The Symbol Path can be set by nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp using the NT SYMBOL PATH environment variable nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp using the -y lt symbol path gt argument when starting the debugger nbsp using sympath and sympath nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp Unable to load image SystemRoot system ntoskrnl exe Win error n WARNING Unable to verify timestamp for ntoskrnl exe ERROR Module load completed but symbols could not be loaded for ntoskrnl exe Windows Kernel Version Service Pack MP procs Free x Product WinNt suite TerminalServer SingleUserTS Personal Built by amd fre win sp gdr - Machine Name Kernel base xfffff PsLoadedModuleList xfffff a e Debug session time Mon Jan UTC - System Uptime days Symbols can not be loaded because symbol path is not initialized nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp The Symbol Path can be set by nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp using the NT SYMBOL PATH environment variable nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp using the -y lt symbol path gt argument when starting the debugger nbsp using sympath and sympath nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp Unable to load image SystemRoot system ntoskrnl exe Win error n WARNING Unable to verify timestamp for ntoskrnl exe ERROR Module load completed but symbols could not be loaded for ntoskrnl exe Loading Kernel Symbols Loading User Symbols Loading unloaded module list Symbol Loading Error Summary Module name nbsp nbsp nbsp nbsp nbsp nbsp Error ntoskrnl nbsp nbsp nbsp nbsp nbsp nbsp nbsp The system cannot find the file specified You can troubleshoot most symbol related issues by turning on symbol loading diagnostics sym noisy and repeating the command that caused symbols to be loaded You should also verify that your symbol search path sympath is correct WARNING Unable to verify timestamp for hal dll ERROR Module load completed but symbols could not be loaded for hal dll nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp Bugcheck Analysis nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp Use analyze -v to get detailed debugging information BugCheck fffffa fa be Kernel symbols are WRO... Read more

https://social.technet.microsoft.com/Forums/en-US/c1a6f68d-7009-4461-bbe5-d438c3c7d9ab/bsod-multiple-times-a-day-ntoskrnlexe?forum=w7itprogeneral
Relevancy 63.64%

Computer crashed four times in a row with the same BSOD.

Not sure what to do.
Running Windows 7 Ultimate 64 bit.

A:Multiple BSOD ntoskrnl.exe+74ec0

The crash dumps are not pointing to anything precisely. But it is memory related. Not necessarily the physical RAM, it may be any driver too, passing bad info to the memory. Let us explore both the possibilities.

Test your RAM modules for possible errors. How to Test and Diagnose RAM Issues with Memtest86+
Run memtest86+ for at least 8 consecutive passes.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

If it does not show any error, enable Driver Verifier to monitor the drivers. Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.



   Information
Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.



   Warning
Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.



   Tip

If you fail to get on the Desktop because of DV, Boot into Advanced Boot Options > Safe mode. Disable DV there. Now boot normally again, and try following the instruction of enabling DV again.
If you cannot boot in Safe mode too, do a System Restore to a point you made earlier.

Let us know the results, with the subsequent crash dumps, if any.

http://www.sevenforums.com/bsod-help-support/366728-multiple-bsod-ntoskrnl-exe-74ec0.html
Relevancy 63.64%

My pc keeps bsod not sure the issue and am not good enough to figure the issue out I did get the following from the minidump the following is a skydrive to the dump Thanks https drv ms u s AuO d Dv rkGgTHSMzvQlwngoE e Microsoft R Windows Debugger Version AMD Copyright c Microsoft Corporation All rights reserved Loading Dump File C Windows Minidump - - dmp Mini day multiple BSOD (ntoskrnl.exe) times a Kernel Dump File Only registers and stack trace are available Symbol search path is Invalid Symbol loading may be unreliable without a symbol search path nbsp nbsp nbsp BSOD multiple times a day (ntoskrnl.exe) nbsp nbsp Use symfix to have the debugger choose a symbol path nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp After setting your BSOD multiple times a day (ntoskrnl.exe) symbol path use reload to refresh symbol locations Executable search path is nbsp Symbols can not be loaded because symbol path is not initialized nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp The Symbol Path can be set by nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp using the NT SYMBOL PATH environment variable nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp using the -y lt symbol path gt argument when starting the debugger nbsp using sympath and sympath nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp Unable to load image SystemRoot system ntoskrnl exe Win error n WARNING Unable to verify timestamp for ntoskrnl exe ERROR Module load completed but symbols could not be loaded for ntoskrnl exe Windows Kernel Version Service Pack MP procs Free x Product WinNt suite TerminalServer SingleUserTS Personal Built by amd fre win sp gdr - Machine Name Kernel base xfffff PsLoadedModuleList xfffff a e Debug session time Mon Jan UTC - System Uptime days Symbols can not be loaded because symbol path is not initialized nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp The Symbol Path can be set by nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp using the NT SYMBOL PATH environment variable nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp using the -y lt symbol path gt argument when starting the debugger nbsp using sympath and sympath nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp Unable to load image SystemRoot system ntoskrnl exe Win error n WARNING Unable to verify timestamp for ntoskrnl exe ERROR Module load completed but symbols could not be loaded for ntoskrnl exe Loading Kernel Symbols Loading User Symbols Loading unloaded module list Symbol Loading Error Summary Module name nbsp nbsp nbsp nbsp nbsp nbsp Error ntoskrnl nbsp nbsp nbsp nbsp nbsp nbsp nbsp The system cannot find the file specified You can troubleshoot most symbol related issues by turning on symbol loading diagnostics sym noisy and repeating the command that caused symbols to be loaded You should also verify that your symbol search path sympath is correct WARNING Unable to verify timestamp for hal dll ERROR Module load completed but symbols could not be loaded for hal dll nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp Bugcheck Analysis nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp Use analyze -v to get detailed debugging information BugCheck fffffa fa be Kernel symbols are WRO... Read more

https://social.technet.microsoft.com/Forums/en-US/77dc062c-9739-459c-9b59-666e3aec8449/bsod-multiple-times-a-day-ntoskrnlexe?forum=w7itprogeneral
Relevancy 63.21%

Good evening So gaming. while ntoskrnl in Multiple BSOD's modules after years of lurking here and following instructions on likewise problems I still can't seem to fix my BSOD problems It crashes mostly in ntoskrnl while playing games different kinds of games What I have done so far Driver updates I can't remember how many times I've tried to update the drivers it's all up to date though Memtest no errors were found I stressed my videocard Multiple BSOD's in ntoskrnl modules while gaming. with some high stressing software to see if it was causing these errors no errors I installed fancontrol to keep tabs on different temperatures in my pc while playing these games however temperatures stay normal I opened up my pc to take away some of the dust and remarkably it actually did seem to work for two whole months without BSOD's confirmation bias obviously Now I can either open up the pc again and remove dust would this really be causing all these BSOD's or Multiple BSOD's in ntoskrnl modules while gaming. register here and ask for some sound advice

Relevancy 63.21%

Hello I must admit I'm completely almost always BSOD, by multiple caused ntoskrnl.exe+7cc40 lost by now and need help The problem is I have this notebookl HP multiple BSOD, almost always caused by ntoskrnl.exe+7cc40 G -b SA Notebook PC Product Specifications HP G -b SA Notebook PC - HP Customer Care United States - English HP G -b SA and I'm getting random BSODs at completely random times Usually is happens after cold start I think I've tried everything hardware-related Memtest h test is ok hdd seems ok too SMART and HDtune machina was in servise center and they replaced mainboard But BSODs are still bumping up I'm running W Home Premium retail multiple BSOD, almost always caused by ntoskrnl.exe+7cc40 version hdd was wiped clean few moths ago so there are no HP quot goodies quot left From what I was able to find it seems like some sort of driver-memory related problem but right now I have no idea what to look for Also service center says in short quot hardware ok must be something in software you are using quot

A:multiple BSOD, almost always caused by ntoskrnl.exe+7cc40

I do not see any really questionable software. K-Lite could cause problems if it was corrupted; codec packages are somewhat worrisome when they get corrupted. Other than that, nothing out of the ordinary.

I did see an out of date driver: netr28x.sys which is your Ralink RT2860 series Wireless LAN Card (you may have a different manufacturer). Download the updated driver from the HP Support site, and use the following steps to re-install the update:

First, download the latest driver. Then do the next steps.
Click Start Menu
Right Click My Computer/Computer
Click Manage
Click Device Manager from the list on the left
Find the device you are trying to uninstall by expanding the appropriate set of devices
Right click the device
Click Uninstall (do not click OK in the dialog box that pops up after hitting Uninstall)
Put a tick in Delete driver software for this device (if this option is available, otherwise just hit OK) and hit OK
Restart your computer only if Windows asks you to.
Install the latest driver for the device.

Alternatively:Login as an adminstrative user.
First, download the latest driver. Then do the next steps.
Click Start Menu
Click Control Panel
Click Hardware and Sound
Click Device Manager (the last link under Devices and Printers)
Find the device you are trying to uninstall by expanding the appropriate set of devices
Right click the device
Click Uninstall (do not click OK in the dialog box that pops up after hitting Uninstall)
Put a tick in Delete driver software for this device (if this option is available, otherwise just hit OK) and hit OK
Restart your computer only if Windows asks you to.
Install the latest driver for the device.
Also, some of your crashes are indicating hard disk related problems. It may just be hard disk corruption, or maybe your hard disk was disconnected during transit.

The first thing to check is whether the hard disk is physically connected to the motherboard properly. To do so:Shut down and turn off the computer
Remove the AC Adapter
Remove the battery
Hold down the power button for 15-30 seconds to close the circuit and drain any residual power
Remove the panel on the underside of the laptop where the hard disk is housed
Remove and re-insert the hard disk by sliding it away from the connector and then gently but firmly pressing it back into the connector (no screws should need to be removed to do this step)
Replace the panel on the underside of the laptop to cover the hard disk
Replace the battery
Replace the AC Adapter
Turn on the computer and see how it responds
Post back once these steps have been implemented whether the system is stable. Sometimes these crashes can occur due to a loose connection.
Then run Disk Check with Automatically fix file system errors checked.

http://www.sevenforums.com/bsod-help-support/236905-multiple-bsod-almost-always-caused-ntoskrnl-exe-7cc40.html
Relevancy 63.21%

Hi,

I have recently been experiencing BSOD several times in the space of an hour, and am unsure of the cause. Blue Screen view has indicated that all the BSODs are related to ntoskrnl.exe.

I have included the recommended files according to the BSOD thread instructions.

Any help would be greatly appreciated, as other posts have seem to identify unrelated software as a potential reason. Also, I have seen posts linking to a microsoft hotfix, however I am little wary of using the hotfix.

It may also be worth noting that I have recently been using a replacement power cable that is under-spec (19V at 3.5A, when the original was delivered 20V at 4.5A). I am not sure whether this is the cause as the problem does not occur when running games or in safe mode.

If you require any more information, please do not hesitate to ask.
Thank you in advance.

A:BSOD. Multiple errors all related to ntoskrnl.exe

Hello, Welcome to SF!


Code:
Windows 7 Kernel Version 7600 MP (2 procs) Free x64
Missing Windows 7 Service Pack 1
Please install SP1. It fixed a lot of possible errors in Windows. Download Windows 7 and Windows Server 2008 R2 Service Pack 1 (KB976932) from Official Microsoft Download Center


Code:
sptd.sys Sun Oct 11 15:55:14 2009 (4AD24632)
This driver belongs to Daemon Tools which is a very well known causer of BSODs. Please uninstall using this uninstaller: DuplexSecure - Downloads


Code:
Security Processor Loader Driver ROOT\LEGACY_SPLDR\0000 This device is not present, is not working properly, or does not have all its drivers installed.
This means that your anti-virus could possibly be installed incorrectly, or it is corrupt. Please uninstall the one you are using now, and download Download Microsoft Security Essentials from Official Microsoft Download Center for testing purposes.


Code:
BIOS Release Date 10/22/2009
BIOS is also out of date, I suggest updating it by going to the manufactures website.

Please do this for now, and post back results.

-Justin

http://www.sevenforums.com/bsod-help-support/349175-bsod-multiple-errors-all-related-ntoskrnl-exe.html
Relevancy 63.21%

I've been having random BSOD and although I suspect the Logitech USB mic is part of it, it seems to happen out of nowhere with bug codes like 0x00000019, 0x000000a, 0x0000018, and 0x000001e. It can happy a few times a day and it's getting really frustrating trying to figure this out. I am sure I updated all of my drivers, and I was wondering if anyone could help pinpoint exactly what is really causing it.

A:BSOD with ntoskrnl. Multiple codes but same source

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {28, 2, 0, fffff800032d6cd0}

Probably caused by : memory_corruption ( nt!MiFindNodeOrParent+0 )

Followup: MachineOwner
---------
Lets check RAM first. Run a minimum of 8 consecutive passes, preferably overnight, or until errors occur using MemTest86+.

Reference:
RAM - Test with Memtest86+

http://www.sevenforums.com/bsod-help-support/366996-bsod-ntoskrnl-multiple-codes-but-same-source.html
Relevancy 63.21%

Hi! I've been having numerous crashes of Overwatch and Google Chrome for the past several weeks. I've been trying to troubleshoot the crashes but haven't been successful so far. I've attached the minidump files to this thread. If anyone can point me to what the problem is I'd be incredibly happy.

Thank you!

EDIT: I forgot to add that the BSOD's have started happening since I've installed a new graphics card, PSU, and RAM.

A:multiple BSOD's playing Overwatch, ntoskrnl.exe

Your motherboard says .....

Whereas your RAM runs at ....

Code:
Speed 1867MHz
Manufacturer Kingston
Serial Number
Asset Tag Number

Overclocking, with a very little mismatch speed. And, Overclocking may cause all the BSODs.

Please set the RAM speed to 1333 MHz and see how it goes.
Further troubleshooting may be needed depending on the result.

http://www.tenforums.com/bsod-crashes-debugging/56425-multiple-bsods-playing-overwatch-ntoskrnl-exe.html
Relevancy 63.21%

This pc has had fairly random BSOD for quite a while you can see from all the minidumps One frequent trigger was going into or coming out of sleep mode Recently I learned that Win and SSD sleep didn't play well so I made some adjustments there From looking at bluescreenviewer several of the BSOD have been related to AMD ATI driver I just updated these a few days ago and have had BSOD since though I don't know if they are related I'm not really sure what will be the best way for you to look at this some of the issues may have been fixed as time went on I had some problems with the intel rapid storage driver iaStorA sys for a while but I updated those drivers and I think that issue was fixed I am suspecting bad memory module or ATI AMD drivers messed up somehow The BSOD have been fairly infrequent so I never bothered to check this before I will run a memtest on it while waiting for your responses Thanks

A:BSOD, likely multiple issues, ntoskrnl.exe+ee2cb

Not knowing what dates you performed what actions on really leaves us guessing to a point, however there are a couple of things showing that can be addressed to see if we can whittle down the issues and work from there.
There has been mention of memory corruption in a couple of dumps (0xA) but that's down to the ATI driver. You've also experienced a 0x116 which is a VIDEO_TDR_ERROR (Timeout Detection Recovery) which means there is an issue with the graphics card. As the ATI driver has been mentioned in other STOPs we'll start there first.
Code:
........
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 116, {fffffa801b816010, fffff8800500ccec, 0, 2}

Unable to load image \SystemRoot\system32\DRIVERS\atikmpag.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for atikmpag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmpag.sys
Probably caused by : atikmpag.sys ( atikmpag+ccec )

Followup: MachineOwner

: kd> lmvm atikmpag
start end module name
fffff880`05000000 fffff880`050a8000 atikmpag T (no symbols)
Loaded symbol image file: atikmpag.sys
Image path: \SystemRoot\system32\DRIVERS\atikmpag.sys
Image name: atikmpag.sys
Timestamp: Tue Jun 23 02:10:51 2015 (5588B21B)
CheckSum: 000AA93B
ImageSize: 000A8000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Download the last known working driver from here and save it to your desktop. Download DDU and follow Display Driver Uninstaller: How to use to remove all traces of your current driver. Reboot and install the downloaded driver. See how stable the system is then and report back.

Also Avira has been flagged.
Code:
fffff880`03eb7bc8 fffff880`05193b71Unable to load image \SystemRoot\system32\DRIVERS\avipbb.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for avipbb.sys
*** ERROR: Module load completed but symbols could not be loaded for avipbb.sys
avipbb+0xcb71
Uninstall Avira and install MS Security Essentials and MalwareBytes.



   Note
Make sure you uncheck the 'Enable Free Trial' box when installing.


Complete these steps and test the system under normal use. Report back, uploading any new dump files if they happen.

http://www.sevenforums.com/bsod-help-support/375554-bsod-likely-multiple-issues-ntoskrnl-exe-ee2cb.html
Relevancy 63.21%

Hi Eightforums,

I have been experiencing a few BSOD's yesterday, but most of them today. I have attached the a report from the SF Diagnostic tool. From a bit of research I found out that is could be most likely be a Windows (core file?) or a driver error. As the title suggests I got 3 different errors and they are PAGE_FAULT_IN_NONPAGED_AREA (the one I get most often), ATTEMPTED_WRITE_TO_READONLY_MEMORY and this BAD_POOL_HEADER.
Hopefully that is enough for you to find the error.

Sebie

A:Multiple BSOD errors, same cause - ntoskrnl.exe+1850e7

Please provide this information so we can provide a complete analysis (from the Pinned Topic at the top of the forum): Blue Screen of Death (BSOD) Posting Instructions Please use Option 1 as it provides Event Viewer logs.

If you didn't run the "Grab All", then please do so. If you did run the "Grab All" then the report generator was terminated too early. Please let the app run for at least 15 minutes (or until the app itself says that it's done).

Most of the memory dumps blame ELTIMA Software's Hide My Folders ActiveX driver (HMFAxCore5decdc700443adec5f3e84408e3098ff.sys )Please uninstall this program and see if that stops the BSOD's
Analysis:
The following is for informational purposes only.

Code:
**************************Tue Sep 16 19:39:51.844 2014 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\091714-69671-01.dmp]
Windows 8 Kernel Version 9600 MP (8 procs) Free x64
Built by: 9600.17085.amd64fre.winblue_gdr.140330-1035
System Uptime:0 days 0:13:05.611
*** WARNING: Unable to verify timestamp for HMFAxCore5decdc700443adec5f3e84408e3098ff.sys
*** ERROR: Module load completed but symbols could not be loaded for HMFAxCore5decdc700443adec5f3e84408e3098ff.sys
Probably caused by :HMFAxCore5decdc700443adec5f3e84408e3098ff.sys ( HMFAxCore5decdc700443adec5f3e84408e3098ff+8162 )
BugCheck BE, {ffffc00072ba7000, 80000001d401b121, ffffd00037a464f0, b}
BugCheck Info: ATTEMPTED_WRITE_TO_READONLY_MEMORY (be)
Arguments:
Arg1: ffffc00072ba7000, Virtual address for the attempted write.
Arg2: 80000001d401b121, PTE contents.
Arg3: ffffd00037a464f0, (reserved)
Arg4: 000000000000000b, (reserved)
BUGCHECK_STR: 0xBE
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCKET_ID: 0xBE_HMFAxCore5decdc700443adec5f3e84408e3098ff+8162
CPUID: "Intel(R) Core(TM) i7-4700MQ CPU @ 2.40GHz"
MaxSpeed: 2400
CurrentSpeed: 2394
BIOS Version 1.50
BIOS Release Date 10/09/2013
Manufacturer TOSHIBA
Product Name Satellite L50-A
??????????????????????????????????????????????????????????????????????????????????????``
**************************Tue Sep 16 19:25:09.050 2014 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\091714-58562-01.dmp]
Windows 8 Kernel Version 9600 MP (8 procs) Free x64
Built by: 9600.17085.amd64fre.winblue_gdr.140330-1035
System Uptime:0 days 0:27:09.818
*** WARNING: Unable to verify timestamp for HMFAxCore5decdc700443adec5f3e84408e3098ff.sys
*** ERROR: Module load completed but symbols could not be loaded for HMFAxCore5decdc700443adec5f3e84408e3098ff.sys
Probably caused by :HMFAxCore5decdc700443adec5f3e84408e3098ff.sys ( HMFAxCore5decdc700443adec5f3e84408e3098ff+8162 )
BugCheck 50, {ffffc000c93a8000, 1, fffff8002d687162, 0}
BugCheck Info: PAGE_FAULT_IN_NONPAGED_AREA (50)
Arguments:
Arg1: ffffc000c93a8000, memory referenced.
Arg2: 0000000000000001, value 0 = read operation, 1 = write operation.
Arg3: fffff8002d687162, If non-zero, the instruction address which referenced the bad memory
address.
Arg4: 0000000000000000, (reserved)
BUGCHECK_STR: AV
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCKET_ID: AV_HMFAxCore5decdc700443adec5f3e84408e3098ff+8162
CPUID: "Intel(R) Core(TM) i7-4700MQ CPU @ 2.40GHz"
MaxSpeed: 2400
CurrentSpeed: 2394
BIOS Version 1.50
BIOS Release Date 10/09/2013
Manufacturer TOSHIBA
Product Name Satellite L50-A
??????????????????????????????????????????????????????????????????????????????????????``
**************************Tue Sep 16 18:56:51.443 2014 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\091714-86937-01.dmp]
Windows 8 Kernel Version 9600 MP (8 procs) Free x64
Built by: 9600.17085.amd64fre.winblue_gdr.140330-1035
System Uptime:0 days 17:33:... Read more

http://www.eightforums.com/bsod-crashes-debugging/53910-multiple-bsod-errors-same-cause-ntoskrnl-exe-1850e7.html
Relevancy 63.21%

Guys I encountered multiple BSODs, It happens when I'm just surfing the net, games or sometimes even just by watching videos/movies.

I'am just a novice in troubleshooting with drivers and just follow steps on this forum and other suggestions, some driver caused BSOD already stopped from reoccurring(Thanks guys), but I'am stuck on finding the source of this new BSODs your help is really appreciated.

Here's my file N550-Mon_05_25_2015_120543_46.zip

A:Multiple BSOD (ntoskrnl.exe, NETIO.SYS, dxgmms1.sys)

Update: I do a clean install, and re-update all of my drivers and software, also uninstall some bloatware from ASUS, now I BSOD when watching video, or when there's .gif on my webpage, also chrome usually crashed.

where is my updated Logs.
N550-Tue_06_02_2015_153515_99.zip

http://www.eightforums.com/bsod-crashes-debugging/66398-multiple-bsod-ntoskrnl-exe-netio-sys-dxgmms1-sys.html