Windows Support Forum

BSOD daily happening, sometimes system just reboots (ntoskrnl.exe)

Q: BSOD daily happening, sometimes system just reboots (ntoskrnl.exe)

Hi all. This is my attempt to resolve this problematic PC. This is a machine donated by my family and it has not run well since day 1. There are many times it will just reboot and when I am lucky, it goes to BSOD and I get a minidump. I do not understand any of the things I read when I ran the WhoCrashed application I installed. So here I am, asking for help.

I have attached the minidumps in a zip in this thread and will follow up with another file from the DM Log Collector.

Thanks in advance for reading this and trying to resolve this.

cheers
tayhwah

Relevancy 100%
Preferred Solution: BSOD daily happening, sometimes system just reboots (ntoskrnl.exe)

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: BSOD daily happening, sometimes system just reboots (ntoskrnl.exe)

Here is the file from DM Log Collector

http://www.sevenforums.com/bsod-help-support/369365-bsod-daily-happening-sometimes-system-just-reboots-ntoskrnl-exe.html
Relevancy 74.82%

For around months now my PC has been shutting down unexpectedly and rebooting at random times Sometimes at idle sometimes while downloading sometimes while daily sometimes several random reboots BSOD - without browsing Several weeks ago random reboots without BSOD - sometimes several daily it was bad - it went random reboots without BSOD - sometimes several daily through several random reboots without BSOD - sometimes several daily reboots before coming back up I ran memtest after that from the CD and it rebooted twice during the memtest - off the disc - but then memtest ran fine after that I then made the mistake of scheduling a checkdsk In the middle of the checkdsk it rebooted again corrupting something and Windows would no longer load I thought I had lost everything Thankfully I used the Windows bit install disk to attempt a repair which failed at first but then managed to repair the system by using a restore point For a few weeks everything seemed okay after that - no new crashes Now for the last days I've had several reboots again just like before I have no idea what is causing it I get no BSOD - it just instantly starts to reboot with no warning I ran WhoCrashed and it said Crash dumps are enabled on your computer No valid crash dumps have been found on your computer One thing I've been noticing in the event viewer is a ton of Microsoft-Windows-SharedAccess NAT events The events say quot The DNS proxy agent was unable to allocate bytes of memory This may indicate that the system is low on virtual memory or that the memory manager has encountered an internal error quot I'm including some logs from the SF Diagnostic Tool You'll see lots of the Microsoft-Windows-SharedAccess NAT errors on the EventSys log I included I have no idea if this is related but I thought I should mention it Can anybody please help me try to figure this out I'm really worried about this I built my custom Windows PC around years ago and it's been going strong until these reboots started to happen recently The fact that it rebooted several weeks ago while running memtest off a CD makes me think it can't be Windows related But I'm stumped My PC was fine for the last few weeks - now it's rebooting again My last crash reboot was just a couple hours ago The EventSys log says The previous system shutdown at PM on was unexpected

A:random reboots without BSOD - sometimes several daily

Suggest you give this a try...
Use the System File Checker tool to repair missing or corrupted system files

http://www.sevenforums.com/general-discussion/328871-random-reboots-without-bsod-sometimes-several-daily.html
Relevancy 74.82%

I accidentally posted this in the wrong place yesterday BSOD without - daily reboots random sometimes several so I'm trying again here For around months now random reboots without BSOD - sometimes several daily my PC has been shutting down unexpectedly and rebooting at random times Sometimes at idle sometimes while downloading sometimes while browsing Several weeks ago it was bad - it went through random reboots without BSOD - sometimes several daily several reboots before coming back up I ran memtest after that from the CD and it rebooted twice during the memtest - off the disc - but then memtest ran fine after that I then made the mistake of scheduling a checkdsk In the middle of the checkdsk it rebooted again corrupting something and Windows would no longer load I thought I had lost everything Thankfully I used the Windows bit install disk to attempt a repair which failed at first but then managed to repair the system by using a restore point For a few weeks everything seemed okay after that - no new crashes Now for the last days I've had several reboots again just like before I have no idea what is causing it I get no BSOD - it just instantly starts to reboot with no warning I ran WhoCrashed and it said Crash dumps are enabled on your computer No valid crash dumps have been found on your computer One thing I've been noticing in the event viewer is a ton of Microsoft-Windows-SharedAccess NAT events The events say quot The DNS proxy agent was unable to allocate bytes of memory This may indicate that the system is low on virtual memory or that the memory manager has encountered an internal error quot I'm including some logs from the SF Diagnostic Tool You'll see lots of the Microsoft-Windows-SharedAccess NAT errors on the EventSys log I included I have no idea if this is related but I thought I should mention it Can anybody please help me try to figure this out I'm really worried about this I built my custom Windows PC around years ago and it's been going strong until these reboots started to happen recently The fact that it rebooted several weeks ago while running memtest off a CD makes me think it can't be Windows related But I'm stumped My PC was fine for the last few weeks - now it's rebooting again The EventSys log says my last crash was The previous system shutdown at PM on was unexpected

A:random reboots without BSOD - sometimes several daily

Well there's not that much to go on without dump files but we'll run some hardware tests just to be sure.
Your PC shouldn't never restart whilst running memtest unless it's hardware related.

We can try running Prime95 to stress test your CPU. Please run it for 2 hours.
Follow these instructions.

Hardware - Stress Test With Prime95

Then can you please run memtest86 again to see if the RAM is failing, you must make sure you run it for at least 8 passes.
Follow these instructions.

RAM - Test with Memtest86+

Post back the results.
From what you described I'm not too sure, well first you say it reboots all the time then a system restore fixes it which makes me believe it's driver or other software related, but then you say it rebooted twice on memtest which makes me believe it's hardware.

I do believe it's hardware, let us know the results.

http://www.sevenforums.com/bsod-help-support/328993-random-reboots-without-bsod-sometimes-several-daily.html
Relevancy 74.82%

Every single day my computer reboots itself at various times and I notice the following simultaneous errors form the same source Source SideBySide Description Dependent Assembly Microsoft VC MFCLOC could not be found and Last Error was The referenced assembly is not installed on your system For more information see Help and Support Center after reboots event daily System snagit error??? at http go microsoft com fwlink events asp Description Resolve Partial Assembly failed for Microsoft VC MFCLOC Reference error System reboots daily after snagit event error??? message The referenced assembly is not installed on your system For more System reboots daily after snagit event error??? information see Help and Support Center System reboots daily after snagit event error??? at http go microsoft com fwlink events asp Description Generate Activation Context failed for C Program Files TechSmith SnagIt MFC DLL Reference error message The operation completed successfully For more information see Help and Support Center at http go microsoft com fwlink events asp I have snagit installed on my system but have disbaled it from starting with msconfig so I suspect that to be the cause of the error However I don t want the snagit tray icon starting Any ideas Thanks nbsp

A:System reboots daily after snagit event error???

It is doubtful that SnagIt is causing the reboots of your system, the error messages listed are harmless.

If you still would like to to keep it from starting to narrow down the cause, find your Startup folder and simply remove the SnagIt icon.

The other option is to start SnagIt, go to the Tools menu, then Program Preferences, then the Program Options tab. Uncheck "Run SnagIt when Windows starts".
 

https://forums.techguy.org/threads/system-reboots-daily-after-snagit-event-error.516356/
Relevancy 74.82%

Hi guys I have the current setup AMD Athlon II X Ghz processor GB GSkill Mhz RAM Had have claimed for replacement TB HDD Had TB I have claimed for replacement Gigabyte GMT USB Mobo MSI R Hawk GPU Corsair VX PSU BSOD errors when viewed in BlueScreenView show the files as ntoskrnl exe and win k sys The strings are SYSTEM SERVICE EXCEPTION KMODE EXCEPTION NTFS FILE SYSTEM BAD POOL HEADER and IRQL NOT LESS OR EQUAL I had GB Gskill RAM one of them was corrupt which I have sent for replacement The other one which I am using has no errors I checked with Memtest for passes The TB HDD I am using is also new a fortnight old Have attached the perfmon report and a few BSOD dumps too Download the Windows NT BSOD jcgriff zip from here bit ly sgxaWW Sorry for shortening the URL but I can t upload here because of size restrictions nbsp

A:Ntoskrnl.exe BSOD daily

What version of Windows are you running? How many days is a fortnight?
 

http://www.techspot.com/community/topics/ntoskrnl-exe-bsod-daily.173331/
Relevancy 74.39%

Hi kind fellows at Eightforums I have a machine Pro that has become unstable It had a very similar problem a couple months ago but daily. BSOD reboots, immidiate random... & updating the Nvidia driver seemed to fix Now that it is BSOD & immidiate reboots, random... daily. doing it again I tried the same fix I used DDU to clean the existing driver first I also did a LAN driver update at the same time This seemed to make things a bit better less frequency of crashing BSOD messages are always different and most disappear before I can record them Here are two Memory management IRQL not less than or equal Another symptom is that my Chrome Browser tabs like to crash A lot Reloading the tab seems to solve the issue if only briefly I have some mini-dump files that appear to be associated with several applications all BSOD & immidiate reboots, random... daily. within the last few days in case that helps but they are a bit big and unfortunately the attachment manager says they are quot invalid quot Thank you for your kind help Truly appreciated Ryder DIGITALSTORM-Sat zip

http://www.eightforums.com/bsod-crashes-debugging/75923-bsod-immidiate-reboots-random-daily.html
Relevancy 73.96%

See pic above and zip file for all the info Hi guys I am new here and decided to make an account since this BSOD is really tcpip.sys ntoskrnl.exe Daily BSOD and frustrating me I updated all my drivers windows update etc nothing seems to help I am almost getting daily BSODs now Also dead the chdfk things and others but they never found anything Register is fine so is harddisk No virus whatsoever or malware found nod and iobot anti malware Tried deleting every bit file I got since I got windows bit dont know if this helps Whocrashed gave me this report windows version Windows Service Pack build windows dir C Windows CPU AuthenticAMD AMD Athlon tm II X Processor AMD level logical processors active mask RAM total VM free Crash Dump Analysis lt B gt Crash dump directory C Windows minidump Crash dumps are enabled on your computer On Wed - - GMT your computer crashed crash dump file C Windows minidump - - dmp This was probably caused by the following module ntoskrnl exe nt x F C Bugcheck code xD xA x x xFFFFF Error DRIVER IRQL NOT LESS OR EQUAL file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System Bug check description This indicates that a kernel-mode driver attempted to access pageable memory at a process IRQL that was too high This appears to be a typical software driver bug and is not likely to be caused by a hardware problem The crash took place in the Windows kernel Possibly this problem is caused by another driver which cannot be identified at this time On Wed - - GMT your computer crashed crash dump file C Windows memory dmp This was probably caused by the following module tcpip sys tcpip x Bugcheck code xD xA x x xFFFFF Error DRIVER IRQL NOT LESS OR EQUAL file path C Windows system drivers tcpip sys product Besturingssysteem Microsoft Windows company Microsoft Corporation description TCP IP-stuurprogramma Bug check description This indicates that a kernel-mode driver attempted to access pageable memory at a process IRQL that was too high This appears to be a typical software driver bug and is Daily BSOD ntoskrnl.exe and tcpip.sys not likely to be caused by a hardware problem The crash took place in a standard Microsoft module Your system configuration may be incorrect Possibly this problem is caused by another driver on your system which cannot be Daily BSOD ntoskrnl.exe and tcpip.sys identified at this time On Wed - - GMT your computer crashed crash dump file C Windows minidump - - dmp This was probably caused by the following module ntoskrnl exe nt x F C Bugcheck code xD xA x x xFFFFF D Error DRIVER IRQL NOT LESS OR EQUAL file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System Bug check description This indicates that a kernel-mode driver attempted to access pageable memory at a process IRQL that was too high This appears to be a typical software driver bug and is not likely to be caused by a hardware problem The crash took place in the Windows kernel Possibly this problem is caused by another driver which cannot be identified at this time On Tue - - GMT your computer crashed crash dump file C Windows minidump - - dmp This was probably caused by the following module dxgmms sys dxgmms x BF Bugcheck code x B xC xFFFFF F BF xFFFFF BC D x Error SYSTEM SERVICE EXCEPTION file path C Windows system drivers dxgmms sys product Microsoft Windows Operating System company Microsoft Corporation description DirectX Graphics MMS Bug check description This indicates that an exception happened while executing a routine that transitions from non-privileged code to privileged code This appears to be a typical software driver bug and is not likely to be caused by a hardware problem The crash took place in a standard Microsoft module Your system configuration may be incorrect Possibly this problem is caused by another driver on your system which cannot be identifie... Read more

A:Daily BSOD ntoskrnl.exe and tcpip.sys

"Tried deleting every 32bit file I got since I got windows 7 64bit ( don't know if this helps )"... This is not a good thing to do. Can you format the C drive and install Windows fresh?
 

http://www.techspot.com/community/topics/daily-bsod-ntoskrnl-exe-and-tcpip-sys.184302/
Relevancy 73.1%

During daily usage of my newly modified PC, I have been receiving multiple BSOD's with the same error. I don't know much about computers, so I can't really seem to locate the issue myself. I have included 2 dmp files and MEMORY.dmp in this archive, and I hope someone might be able to help me.

http://www.mediafire.com/download/e16w7y...p/BSOD....
Virus scan:
https://www.virustotal.com/en/file/5c8d1.../analysis/

Thank you, help would be deeply appreciated
 

https://forums.techguy.org/threads/bsod-error-irql_not_less_or_equal-ntoskrnl-exe-happening-mul.1158099/
Relevancy 73.1%

Hey guys Recently got fault? Daily driver ntoskrnl.exe BSOD, my new computer and it is amazing Only problem is that or times a day i get a BSOD I checked the Minidump files and it's saying something about VISTA DRIVER FAULT and ntoskrnl exe driver fault This is what the Dump File reads Code Loading Dump File C Users Daily BSOD, ntoskrnl.exe driver fault? Nico Desktop - - dmp Mini Kernel Dump File Only registers and stack trace are available Symbol search path is Invalid Symbol loading may be unreliable without a symbol search path Use symfix to have the debugger choose a symbol path After setting your symbol path use reload to refresh symbol locations Executable search path is Symbols can not be loaded because symbol path is not initialized The Symbol Path can be set by using the NT SYMBOL PATH environment variable using the -y lt symbol path gt argument when starting the debugger using sympath and sympath Unable to load image SystemRoot system ntoskrnl exe Win error n WARNING Unable to verify timestamp for ntoskrnl exe ERROR Module load completed but symbols could not be loaded for ntoskrnl exe Windows Kernel Version MP procs Free x Product WinNt suite TerminalServer SingleUserTS Personal Built by amd fre win gdr - Machine Name Kernel base xfffff a e PsLoadedModuleList xfffff c be Debug session time Sat Oct UTC System Uptime days Symbols can not be loaded because symbol path is not initialized The Symbol Path can be set by using the NT SYMBOL PATH environment variable using the -y lt symbol path gt argument when starting the debugger using sympath and sympath Unable to load image SystemRoot system ntoskrnl exe Win error n WARNING Unable to verify timestamp for ntoskrnl exe ERROR Module load completed but symbols could not be loaded for ntoskrnl exe Loading Kernel Symbols Loading User Symbols Loading unloaded module list Bugcheck Analysis Use analyze -v to get detailed debugging information BugCheck A b fffff a ddaa Kernel symbols are WRONG Please fix symbols to do analysis Your debugger is not using the correct symbols In order for this command to work properly your symbol path must point to pdb files that have full type information Certain pdb files such as the public OS symbols do not contain the required information Contact the group that provided you with these symbols if you need this command to work Type referenced nt KPRCB Your debugger is not using the correct symbols In order for this command to work properly your symbol path must point to pdb files that have full type information Certain pdb files such as the public OS symbols do not contain the required information Contact the group that provided you with these symbols if you need this command to work Type referenced nt KPRCB Your debugger is not using the correct symbols In order for this command to work properly your symbol path must point to pdb files that have full type information Certain pdb files such as the public OS symbols do not contain the required information Contact the group that provided you with these symbols if you need this command to work Type referenced nt KPRCB Probably caused by ntoskrnl exe nt fdaa Followup MachineOwner --------- kd gt analyze -v Bugcheck Analysis IRQL NOT LESS OR EQUAL a An attempt was made to access a pageable or completely invalid address at an interrupt request level IRQL that is too high This is usually caused by drivers using improper addresses If a kernel debugger is available get the stack backtrace Arguments Arg b memory referenced Arg IRQL Arg bitfield bit value read operation write operation bit value not an execute operation execute operation only on chips which support this level of status Arg fffff a ddaa address which referenced memory Debugging Details ------------------ Kernel symbols are WRONG Please fix symbols to do analysis Your debugger is not using the correct symbols In order for this command to work properly your symbol path must point to pdb files that have full type information Certain pdb files su... Read more

A:Daily BSOD, ntoskrnl.exe driver fault?

  
Quote: Originally Posted by SunDown


Hey guys, Recently got my new computer, and it is amazing! Only problem is that 2 or 3 times a day i get a BSOD...

I checked the Minidump files and it's saying something about VISTA_DRIVER_FAULT and ntoskrnl.exe driver fault.

This is what the Dump File reads:


Code:
Loading Dump File [C:\Users\Nico\Desktop\100210-21122-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: *** Invalid ***
****************************************************************************
* Symbol loading may be unreliable without a symbol search path. *
* Use .symfix to have the debugger choose a symbol path. *
* After setting your symbol path, use .reload to refresh symbol locations. *
****************************************************************************
Executable search path is:
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
* *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
*********************************************************************
Unable to load image \SystemRoot\system32\ntoskrnl.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Machine Name:
Kernel base = 0xfffff800`02a1e000 PsLoadedModuleList = 0xfffff800`02c5be50
Debug session time: Sat Oct 2 15:59:55.289 2010 (UTC + 1:00)
System Uptime: 0 days 4:09:36.710
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
* *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
*********************************************************************
Unable to load image \SystemRoot\system32\ntoskrnl.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Loading Kernel Symbols
...............................................................
................................................................
......................
Loading User Symbols
Loading unloaded module list
.....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {2b, 2, 0, fffff80002a6ddaa}

***** Kernel symbols are WRONG. Please fix symbols to do analysis.

*************************************************************************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** **... Read more

http://www.sevenforums.com/bsod-help-support/115491-daily-bsod-ntoskrnl-exe-driver-fault.html
Relevancy 73.1%

Hello everyone I was hoping someone could help me out with a BSOD I had Windows on my computer for the last months without a single BSOD a couple of days ago I had a fresh install installed all my programs drivers windows updates etc - ntoskrnl.exe Repetitive [DAILY] 0x000000D1 - BSOD same stuff as my previous install basically But now I am getting a BSOD ever day ever since Of course I [DAILY] BSOD - 0x000000D1 - Repetitive ntoskrnl.exe first looked into a lot of other threads in this forums and already did the following things Checked if there were any Minidumps files and yes there are of every single on of them I used BlueScreenView and even though quot cause by driver quot is different everytime the crash address is always quot ntoskrnl exe bc quot I also used Memtest and let it run and it took approx minutes before it said quot Pass quot and I saw errors The quot Bug Check String quot is always quot DRIVER IRQL NOT [DAILY] BSOD - 0x000000D1 - Repetitive ntoskrnl.exe LESS OR EQUAL quot I Provided three minidump files and I hope someone wants to help me out to find the root cause of this problem Cheers Rick

A:[DAILY] BSOD - 0x000000D1 - Repetitive ntoskrnl.exe

Your logs are incomplete. Follow Blue Screen of Death (BSOD) Posting Instructions, let the tool run until it is 100% complete then upload the resulting .zip file.

http://www.sevenforums.com/bsod-help-support/337964-daily-bsod-0x000000d1-repetitive-ntoskrnl-exe.html
Relevancy 73.1%

Over the past week or two I have been getting random BSOD's when gaming. Usually its blue screening when I quit the game or sometime if I alt tab out or in. I've been trying to figure it out for myself but I'm at a complete lose and its doing my head in. Anyway I hope I've sent all the needed information, if I've missed anything just let me know and I'll try and give all the information I can so please bear with me.

A:Random Daily BSOD (win32k.sys and ntoskrnl.exe)

Code:
fffff880`0c1517d8 fffff880`101f57a8Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
nvlddmkm+0x1137a8

Code:
Host Name: ZOIDY-PC
OS Name: Microsoft Windows 7 Ultimate
OS Version: 6.1.7600 N/A Build 7600
OS Manufacturer: Microsoft Corporation
OS Configuration: Standalone Workstation
OS Build Type: Multiprocessor Free
Registered Owner: Zoidy
Registered Organization:
Product ID: 00426-OEM-8992662-00006
Original Install Date: 18/09/2011, 1:07:44 a.m.
System Boot Time: 8/02/2014, 12:29:43 p.m.
System Manufacturer: Gigabyte Technology Co., Ltd.
System Model: Z68X-UD3R-B3
WinDBG points to a video display driver issue -- you can try updating the driver -- but I think there are deeper issues.

Do the following please:

1. Download and save this tool to your desktop:
http://go.microsoft.com/fwlink/?linkid=52012

2. Run the tool, and then click Copy - ignore any errors if they appear

3. Use CTRL+V to paste the unedited results of the tool here in your next reply

http://www.sevenforums.com/bsod-help-support/321243-random-daily-bsod-win32k-sys-ntoskrnl-exe.html
Relevancy 73.1%

Hey, I run memtest86+ , CrystalDisk - no errors
I remembered that the last time BSOD occurs was 2 times row when I login in windows , 1 time when I plug the headphones.

A:BSOD - 0x000000f4 - CRITICAL_OBJECT_TERMINATION Daily ntoskrnl.exe

Hi cnfdnc.

Make it sure that your Corsair Force GT SSD is running with the latest firmware. Corsair does it via their forum: SSD Firmware Update - The Corsair Support Forums

If it is up-to-date; or if the situation is the same even after the update, do two more things.

First, sometimes the file system monitoring mechanism of an antivirus can cause this Stop 0xF4. And here we are seeing that the ESet NOD32 antivirus system monitor driver is failing.

Code:
fffff880`02ea7148 fffff880`02c30126Unable to load image \SystemRoot\system32\DRIVERS\eamonm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for eamonm.sys
*** ERROR: Module load completed but symbols could not be loaded for eamonm.sys
eamonm+0x20126
Description here: Driver Reference Table - eamon.sys

Uninstall ESET. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.
Download, install and update those, and then run full system scans with both of them, one by one.

Second, sometimes the backup/restore programs also affect the disk behavior adversely. And you have MyPC BackUp. Remove it from startup, and dont let it run in the background unnecessarily. Free up the startup. Windows does not need any other program to auto start with it, but the auto start programs often conflicts and causes various problems including BSODs.
Click on the Start button
Type ?msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the ?Startup? tab.
Deselect all items other than the antivirus.
Apply > OK
Accept then restart.
Let us know the results.

______________________________________________________________________________________

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck F4, {3, fffffa8007501960, fffffa8007501c40, fffff800039867b0}

----- ETW minidump data unavailable-----
Probably caused by : csrss.exe

Followup: MachineOwner
---------

http://www.sevenforums.com/bsod-help-support/313431-bsod-0x000000f4-critical_object_termination-daily-ntoskrnl-exe.html
Relevancy 73.1%

Hi I've researched and attempted as much as I could possibly try and now have to ask for community assistance I never had these BSODs until updating to Windows My crash dump files show two regular culprits majority are the first one This was probably caused by the following module ntoskrnl exe nt x A B Bugcheck code x x x x x Error DPC WATCHDOG VIOLATION file path C WINDOWS system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System This was probably caused by the following module nvstor sys nvstor x Bugcheck code x x x x x Error DPC WATCHDOG VIOLATION file path C WINDOWS system drivers nvstor sys product NVIDIA nForce TM SATA Driver company NVIDIA Daily (DPC_WATCHDOG_VIOLATION): ntoskrnl.exe? nvstor.sys? BSOD Corporation description NVIDIA nForce TM Sata Performance Driver I've Daily BSOD (DPC_WATCHDOG_VIOLATION): ntoskrnl.exe? nvstor.sys? tried updating all Windows Updates and individual drivers I do see that my BIOS version is Dell Inc slightly outdated however when I try Daily BSOD (DPC_WATCHDOG_VIOLATION): ntoskrnl.exe? nvstor.sys? to install or or all from Support for Inspiron Dell US nothing happens This seems to be a known issue where it just creates a WinFlash sys file but doesn't actually flash I tried installing the new bios version from a USB drive no luck that way either Here's one of many summaries of this failed Bios update issue SOLVED Problem Updating BIOS for Dell Inspiron Perfect Fit Computers Finally when I run the DM Log Collector tool from this site to attach to this post it runs through no problem but creates a zipped file on my desktop with no files within The filesize is bytes Am I missing something I'd be more than happy to post any all info Thank you big time for any insight guidance tips questions and so forth Thank you

A:Daily BSOD (DPC_WATCHDOG_VIOLATION): ntoskrnl.exe? nvstor.sys?

Please follow the instructions at the top. We need the dump files to troubleshoot.

http://www.tenforums.com/bsod-crashes-debugging/69099-daily-bsod-dpc_watchdog_violation-ntoskrnl-exe-nvstor-sys.html
Relevancy 73.1%

Hey guys Recently got my new computer and it is fault? ntoskrnl.exe Daily driver BSOD, amazing Only problem is that or Daily BSOD, ntoskrnl.exe driver fault? times a day i get a BSOD I checked the Minidump files and it s saying something about VISTA DRIVER FAULT and ntoskrnl exe driver fault This is what the Dump File reads Code Loading Dump File C Users Nico Desktop - - dmp Mini Kernel Dump File Only registers and stack trace are available Symbol search path is Invalid Symbol loading may be unreliable without a symbol search path Use symfix to have the debugger Daily BSOD, ntoskrnl.exe driver fault? choose a symbol path After setting your symbol path use reload to refresh symbol locations Executable search path is Symbols can not be loaded because symbol path is not initialized The Symbol Path can be set by using the NT SYMBOL PATH environment variable using the -y lt symbol path gt argument when starting the debugger using sympath and sympath Unable to load image SystemRoot system ntoskrnl exe Win error n WARNING Unable to verify timestamp for ntoskrnl exe ERROR Module load completed but symbols could not be loaded for ntoskrnl exe Windows Kernel Version MP procs Free x Product WinNt suite TerminalServer SingleUserTS Personal Built by amd fre win gdr - Machine Name Kernel base xfffff a e PsLoadedModuleList xfffff c be Debug session time Sat Oct UTC System Uptime days Symbols can not be loaded because symbol path is not initialized The Symbol Path can be set by using the NT SYMBOL PATH environment variable using the -y lt symbol path gt argument when starting the debugger using sympath and sympath Unable to load image SystemRoot system ntoskrnl exe Win error n WARNING Unable to verify timestamp for ntoskrnl exe ERROR Module load completed but symbols could not be loaded for ntoskrnl exe Loading Kernel Symbols Loading User Symbols Loading unloaded module list Bugcheck Analysis Use analyze -v to get detailed debugging information BugCheck A b fffff a ddaa Kernel symbols are WRONG Please fix symbols to do analysis Your debugger is not using the correct symbols In order for this command to work properly your symbol path must point to pdb files that have full type information Certain pdb files such as the public OS symbols do not contain the required information Contact the group that provided you with these symbols if you need this command to work Type referenced nt KPRCB Your debugger is not using the correct symbols In order for this command to work properly your symbol path must point to pdb files that have full type information Certain pdb files such as the public OS symbols do not contain the required information Contact the group that provided you with these symbols if you need this command to work Type referenced nt KPRCB Your debugger is not using the correct symbols In order for this command to work properly your symbol path must point to pdb files that have full type information Certain pdb files such as the public OS symbols do not contain the required information Contact the group that provided you with these symbols if you need this command to work Type referenced nt KPRCB Probably caused by ntoskrnl exe nt fdaa Followup MachineOwner --------- kd gt analyze -v Bugcheck Analysis IRQL NOT LESS OR EQUAL a An attempt was made to access a pageable or completely invalid address at an interrupt request level IRQL that is too high This is usually caused by drivers using improper addresses If a kernel debugger is available get the stack backtrace Arguments Arg b memory referenced Arg IRQL Arg bitfield bit value read operation write operation bit value not an execute operation execute operation only on chips which support this level of status Arg fffff a ddaa address which referenced memory Debugging Details ------------------ Kernel symbols are WRONG Please fix symbols to do analysis Your debugger is not using the correct symbols In order for this command to work properly your symbol path must point to pdb files that have ful... Read more

A:Daily BSOD, ntoskrnl.exe driver fault?

Tell us when you get these BSODs, i.e., randomly or are you doing something specific at the time.

You have errors 0x3B and two 0xA but they only cite Windows OS drivers and these are usually too general to be of much diagnostic help.

By the way, I noticed your system hardware (nice set-up; love to hear your feed back on that 635 processor) and you are running 6 gigs of RAM. Try running with just 4 gigs. Do you gain stability?
 

http://www.techspot.com/community/topics/daily-bsod-ntoskrnl-exe-driver-fault.154313/
Relevancy 73.1%

I have had a persistent problem with BSODs for several months with this laptop. Reloaded system from the factory Windows system files on drive Q about 3 months ago. Really didn't help. Problem is getting more frequent, was maybe once a week, now getting closer to daily. Been doing battery pull before rebooting. Attempting to run a system repair is unsuccessful.

Bug Check Codes 0x00000124,0xc000021a, 0x0000003b
Crash Addresses ntoskrnl.exe+748c0, ntoskrnl.exe+72a40

Read the "how to post BSOD request" instructions.
Attached DM Log Collector zip file
thanks, uwharrie

A:BSOD was weekly, now daily, ntoskrnl.exe+748c0

Upload your MSINFO32.nfo file.
Click on the start button
Type "msinfo32" (without quotes) in the search bar of the start menu, click the resulting link. It will open the System Information window.
File>Save. In the "File Name" filed, put "MSINFO32" (without Quote), give the save location to desktop, and click the "save" button.
Give the time for processing, it will save a .nfo file on your desktop.
Zip it, and upload it following the instruction.
It is very urgent to check this file in this issue.
Also uninstall Google Chrome for the time being till the issue becomes better; because Chrome contributes to 0x124 BSODs, and there is a chance for the same in your case too.

http://www.sevenforums.com/bsod-help-support/373251-bsod-weekly-now-daily-ntoskrnl-exe-748c0.html
Relevancy 73.1%

Hi everyone I got BSOD daily and I cannot figure it out My config is attached WhoCrashed shows about the dump file the following crash dump file C Windows Minidump - - CRITICAL_OBJECT_TERMINATION ntoskrnl.exe 0x000000f4 - Daily BSOD - dmp This was probably caused by the following module ntoskrnl exe nt x BC Bugcheck code xF x xFFFFFA xFFFFFA C xFFFFF B Error CRITICAL OBJECT TERMINATION file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation BSOD - 0x000000f4 - CRITICAL_OBJECT_TERMINATION Daily ntoskrnl.exe description NT Kernel amp System Bug check description This indicates that a process or thread crucial to system operation has unexpectedly exited or been terminated This appears to be a typical software driver bug and is not likely to be caused by a hardware problem This problem might be caused by a thermal issue The crash took place in the Windows kernel Possibly this problem is caused by another driver that cannot be identified at this time The CrystalInfo shows and I checked the RAM with memtest and memory windows diagnostic tool Also quot quot error-checking quot from the volume options The sata cable on the SSD is connected to the Sata port not marvel I remembered some of the BDOS BSOD - 0x000000f4 - CRITICAL_OBJECT_TERMINATION Daily ntoskrnl.exe of them were BSOD - 0x000000f4 - CRITICAL_OBJECT_TERMINATION Daily ntoskrnl.exe when I connect the headphones in the PC and of them was when I install application It maybe just chance but plug amp play is installing driver application was installin things too I dont know This is the dump file Download - - dmp from Sendspace com - send big files the easy way

A:BSOD - 0x000000f4 - CRITICAL_OBJECT_TERMINATION Daily ntoskrnl.exe

Same dump file: Zippyshare.com - 112913-6084-01.dmp
Forget ot mantioned: I got the newest version of the AHCP/sata controlled installed from Device Manager, also updated my videodrivers.

http://www.techsupportforum.com/forums/f299/bsod-0x000000f4-critical_object_termination-daily-ntoskrnl-exe-756529.html
Relevancy 72.24%

This is an ongoing issue I installed this from a Retail Windows the screens on (BSOD NTOSKRNL.EXE BLACK without BS) Semi-daily Ultimate disk a few months ago with GB of RAM At the time I installed I was getting crashes of the way into the install When I moved the RAM around I was able to complete the installation memtest fsails Checking BIOS I saw thet the guys at the PC store had overclocked the board slightly I reset the board to default and reinstalled no problem Flash forward a couple weeks I get BSODs on ntoskrnl exe I run memtest and get no errors but decide to swap out the memory anyway I also had a weird problem where RDesktop and Windows file sharing FROM this PC were extremely slow kB sec but other transfers were fine Fixed by adding a new NIC It's worse now Daily crashes Two this morning Can you guys tell from this if it's the MB or did I get two bum sets of RAM in a row Some other hardware Semi-daily BLACK screens (BSOD without the BS) on NTOSKRNL.EXE MB ASUS M A -M Attachment Attachment

A:Semi-daily BLACK screens (BSOD without the BS) on NTOSKRNL.EXE

Hi.
Update the software\driver for Asus ATK0110 ACPI Utility (a known BSOD maker in Win7). Also a part of the Asus PCProbe and AISuite Utilities
Yours is too old from 28-Mar-05 no way to be compatible with windows 7
ASUSTeK Computer Inc. -Support- Drivers and Download
Update your ASUS NX1101 Gigabit Ethernet Adapter
ASUSTeK Computer Inc. -Support- Drivers and Download

Finish and post back.

http://www.sevenforums.com/bsod-help-support/196505-semi-daily-black-screens-bsod-without-bs-ntoskrnl-exe.html
Relevancy 72.24%

Since about the start of November I've been getting BSOD Almost daily with some days having multiple occurrences. Most of the time I'm getting 3b codes but I'm also seeing others.

http://sdrv.ms/1cnXCb1
That link contains everything taken from the SF Diagnostic Tool.

Any help would be greatly appreciated as this happens when my computer is just idling as well as in use and has rendered me incapable of gaming.

A:Almost daily BSOD ntoskrnl.exe assorted check codes.

I should also mention that this started in windows 8 and believing it to possibly be a problem within windows 8 itself I rolled back to 7 and continued to have problems.

http://www.sevenforums.com/bsod-help-support/313022-almost-daily-bsod-ntoskrnl-exe-assorted-check-codes.html
Relevancy 72.24%

Most of the time I get a BSOD with ntoskrnle.exe

Updated video card drivers and motherboard drivers. Had an ATI graphics card, pulled it and removed drivers. Running only onboard Intel hd3000 to eliminate the graphics card.
Same thing.
Motherboard: Asus P8H67M Pro

Any ideas to nail this one down?

Last few minidumps attached.

A:BSOD: random times, daily, ntoskrnl.exe and sometimes dxgmms1.sys

Welcome

All of the minidump files blame usbhub.sys, do you have usb hub. The bugcheck code is FE, which usually point to USB device driver. One generic way to solve issue with usb BSODs is to go to device manager, under usb list, click properties and uninstall everything, then restart your computer


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa80082fe060, fffff80000b9c3d8, fffffa80088016b0}

*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : usbhub.sys

Followup: MachineOwner
Let us know if it helps

http://www.sevenforums.com/bsod-help-support/251428-bsod-random-times-daily-ntoskrnl-exe-sometimes-dxgmms1-sys.html
Relevancy 72.24%

Hi there am having a problem with a new computer system Freshly installed with windows Pro Have attached the DM log collector files NODE- zip For the first week this system ran without problems Left online for long periods copying network files and downloading etc Then on July th began to suffer from unexplained system reboots after between - mins of being left without keyboard or mouse input These don't involving idle Regular Reboots ntoskrnl.exe system System on - happen while the system is in use and I've been able to confirm - hour periods of intense usage Regular System Reboots involving ntoskrnl.exe - on system idle without any crash Each of the idle crashes comes up with a quot The computer has rebooted from a bugcheck quot listing in the Windows event review Each of these reboots basically restarts the machine and comes back to the login screen I've downloaded the BlueScreenView minidump reviewer program to find out what drivers are involved and the results of these crashes are as follows Between and Bug check String Caused by Driver Address Unknown NTFS sys a e Unknown tcpip sys fb c Memory Management ntoskrnl exe IRQL NOT LESS OR EQUAL ntoskrnl exe Memory Management ntoskrnl exe Page fault in nonpaged area ndis sys IRQL NOT LESS OR EQUAL ntoskrnl exe Bad Pool Header FLTMGR SYS Unknown ntoskrnl exe Page fault in nonpaged area ntoskrnl exe On July th I installed some Windows Updates Latest Nvidia Geforce drivers and some Epson printer drivers Just to re-iterate this crash reboot symptom only happens while the computer is idle for an extended time without keyboard or mouse input and happens regardless of whether the computer is literally doing nothing - or actively downloading from the internet steam etc The PC is overclocked But I have tested reverting to system defaults non overclocked this past weekend for hours or so and the last few crashes have happened with the non overclocked status Any help or suggestions gladly appreciated

A:Regular System Reboots involving ntoskrnl.exe - on system idle

Have added an image of the BlueScreenView Analysis - it actually shows that in another two instances Bad Pool and Page fault - the ntoskrnl.exe was involved in the crash as one of two cited drivers .. so that means currently 8 of the 10 reboots have involved this driver I believe.

http://www.tenforums.com/bsod-crashes-debugging/56510-regular-system-reboots-involving-ntoskrnl-exe-system-idle.html
Relevancy 71.81%

Hi there, I built my PC last week and ever since I've been getting fairly consistent blue screens occurring.

Thing I've tried so far:

I have run memtest with no errors, did a clean OS install, temps on CPU and GPU are fine, reseated all hardware, update drivers, yet I still get the BSOD.

I've attached the .dmp files of my crashes since the OS install.

PC specs are on my profile but can be posted here if needed.

Thanks in advance,

Jim.

A:[SOLVED] Multiple BSOD occuring daily after normal PC use (ntoskrnl.exe + others)

Hi,

We have various different bugchecks attached, although the important ones to mention for now are of the SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e) bugcheck and are faulting athurx.sys.

We can see various athurx calls being made:


Code:
1: kd> kv
Child-SP RetAddr : Args to Child : Call Site
fffff880`021ca2f0 fffff800`02ad76f2 : fffffa80`00000000 fffffa80`0632ab01 fffffa80`06309e30 fffff880`00000000 : nt!ExAllocatePoolWithTag+0x5b8
fffff880`021ca3e0 fffff880`00e0c3db : fffffa80`0632ab30 00000000`00000001 00000000`00000000 fffffa80`06309e30 : nt!IoSetCompletionRoutineEx+0x52
fffff880`021ca420 fffff880`00e0bf14 : 00000000`00000000 0000057f`00001000 00000000`00000000 fffffa80`06309e30 : Wdf01000!FxIoTarget::SubmitLocked+0x47f
fffff880`021ca4d0 fffff880`00e0df22 : fffff880`02808dc0 fffffa80`0632ab30 fffff880`021ca560 0000057f`f9cd54c8 : Wdf01000!FxIoTarget::Submit+0x60
fffff880`021ca510 fffff880`0280a97f : fffffa80`06277fc0 fffffa80`0632ab30 fffffa80`06309e30 fffffa80`03b54040 : Wdf01000!imp_WdfRequestSend+0x48e
fffff880`021ca5a0 fffffa80`06277fc0 : fffffa80`0632ab30 fffffa80`06309e30 fffffa80`03b54040 fffffa80`0633ea80 : athurx+0x997f
fffff880`021ca5a8 fffffa80`0632ab30 : fffffa80`06309e30 fffffa80`03b54040 fffffa80`0633ea80 fffff880`02803a7a : 0xfffffa80`06277fc0
fffff880`021ca5b0 fffffa80`06309e30 : fffffa80`03b54040 fffffa80`0633ea80 fffff880`02803a7a 0000057f`f9cd54c8 : 0xfffffa80`0632ab30
fffff880`021ca5b8 fffffa80`03b54040 : fffffa80`0633ea80 fffff880`02803a7a 0000057f`f9cd54c8 0000057f`f9cf61c8 : 0xfffffa80`06309e30
fffff880`021ca5c0 fffffa80`0633ea80 : fffff880`02803a7a 0000057f`f9cd54c8 0000057f`f9cf61c8 00000000`00000000 : 0xfffffa80`03b54040
fffff880`021ca5c8 fffff880`02803a7a : 0000057f`f9cd54c8 0000057f`f9cf61c8 00000000`00000000 fffff880`021ca5f8 : 0xfffffa80`0633ea80
fffff880`021ca5d0 0000057f`f9cd54c8 : 0000057f`f9cf61c8 00000000`00000000 fffff880`021ca5f8 fffffa80`0572ac80 : athurx+0x2a7a
fffff880`021ca5d8 0000057f`f9cf61c8 : 00000000`00000000 fffff880`021ca5f8 fffffa80`0572ac80 00000000`00000000 : 0x0000057f`f9cd54c8
fffff880`021ca5e0 00000000`00000000 : fffff880`021ca5f8 fffffa80`0572ac80 00000000`00000000 00000000`00000010 : 0x0000057f`f9cf61c8
athurx = Atheros AR9271 Wireless Network Adapter.

Update that driver here - ATHEROS drivers for Microsoft Windows (Atheros?????)

Do note that this also can be caused by !avast possibly conflicting and causing issues with the NETBIOS ports. If updating the driver itself does not help, I recommend temporarily removing !avast and replacing it with Microsoft Security Essentials:

!avast removal tool - avast! Uninstall Utility | Download aswClear for avast! Removal

MSE - Microsoft Security Essentials - Microsoft Windows

Regards,

Patrick

http://www.techsupportforum.com/forums/f299/solved-multiple-bsod-occuring-daily-after-normal-pc-use-ntoskrnl-exe-others-703678.html
Relevancy 69.23%

hello i have recently been having some problems with my new-ish gaming pc it keeps restarting by itself bluescreenview blames ntroskrnl i have ran tests and the gpu cpu ram and hard drive all perform normally and have no errors and also perform at a good temprature i returned to the company and they said they couldnt get blames , it's reboots ntoskrnl but says , bsod Computer a it to crash reboot but as soon as i got it back it happened again could it possibly be something wrong with the power supply or motherboard thanks in advance I've also checked all my Computer reboots , but says it's a bsod , blames ntoskrnl peripherals I've used different keyboard and mouse it crashed without wireless adapter or Ethernet cable I've tried new headphones and even a new power cable It doesn't come up with a bsod just looks like a reboot here is what bluscreenview says - - dmp x fffffa ntoskrnl exe ntoskrnl exe b efc NT Kernel amp System Microsoft Windows Operating System Microsoft Corporation win sp gdr - x ntoskrnl exe b efc C Windows Minidump - - dmp specs FX ghz zotac GTX gb ram tb hard drive gigabyte lmt usb motherboard Aerocool Integrator W

A:Computer reboots , but says it's a bsod , blames ntoskrnl

Someone please help Loool ������

http://www.sevenforums.com/bsod-help-support/375997-computer-reboots-but-says-its-bsod-blames-ntoskrnl.html
Relevancy 69.23%

I have had problems with this laptop randomly shutting off and bsods. The cause of the majority of the bsods is ntoskrnl.exe. I have uninstalled Avast and replaced it with AVG on 12/16/11 (today, for me atleast.).

I have checked off automatic restart and still doesn't show a blue screen very often, it just reboots.
I ran memtest on multiple occasions for at least 2 passes each and no errors were found.

Operating System: Windows 7 Home Premium 64-bit Service Pack 1
System Model: Gateway NV57H26u
Processor: Intel Core i5-2410M CPU @ 2.30GHz

A:Frequent ntoskrnl.exe BSOD's and random reboots.

  
Quote: Originally Posted by homieb1030


I have had problems with this laptop randomly shutting off and bsods. The cause of the majority of the bsods is ntoskrnl.exe. I have uninstalled Avast and replaced it with AVG on 12/16/11 (today, for me atleast.).

I have checked off automatic restart and still doesn't show a blue screen very often, it just reboots.
I ran memtest on multiple occasions for at least 2 passes each and no errors were found.

Operating System: Windows 7 Home Premium 64-bit Service Pack 1
System Model: Gateway NV57H26u
Processor: Intel Core i5-2410M CPU @ 2.30GHz


You have 5 different appearent causes in 7 crashes. My gut feeling says it is Related to bScsiMSa.sys Memory Stick Controller from Broadcom Corporation.

I would remove it at least to test.
You also have some old drivers needing updating

Code:
Afc.sys 7/12/2006 12:48:20 AM fffff880`05fd5000 fffff880`05fde000 0x00009000 0x44b48d24
NTIDrvr.sys 3/24/2009 10:09:39 PM fffff880`05fe6000 fffff880`05fee000 0x00008000 0x49c9a073
UBHelper.sys 4/27/2009 3:48:19 AM fffff880`05fde000 fffff880`05fe6000 0x00008000 0x49f57153
How To Find Drivers:




Quote:
- search Google for the name of the driver
- compare the Google results with what's installed on your system to figure out which device/program it belongs to
- visit the web site of the manufacturer of the hardware/program to get the latest drivers (DON'T use Windows Update or the Update driver function of Device Manager).
- if there are difficulties in locating them, post back with questions and someone will try and help you locate the appropriate program.


- - The most common drivers are listed on this page: Driver Reference Driver Reference
- - Driver manufacturer links are on this page: Drivers and Downloads

http://www.sevenforums.com/bsod-help-support/203039-frequent-ntoskrnl-exe-bsods-random-reboots.html
Relevancy 69.23%

Hello

Since I purchased the components for my current PC over 18 months ago, I've usually had some kind of BSOD rebooting problem. Sometimes it's more frequent than others.

However, I recently grew tired of the problem and thought a disk format and re-install of windows XP SP2 would help. And it did! The PC was then infected by a rootkit virus, which I believe I managed to remove and I've since posted on these forums to check if it's clean (it is). But since getting the rootkit, the BSOD rebooting issues has resurfaced again, although this could be pure coincidence.

Prior to re-installing windows XP, I installed 'NirSoft BlueScreenView' so I could see the contents of the blue screen and ntoskrnl.exe always seemed to be present. I've noticed that this is the same once again.

Can anyone suggest what may be wrong?

A:Random BSOD reboots - linked to ntoskrnl.exe maybe?

Ntoskrnl.exe is a key Windows component and is often cited as the scene of the crime (IMO), rather than as the criminal.http://en.wikipedia.org/wiki/Ntoskrnl.exeIn BlueScreenView...Edit/Select All...then File/Save Selected Items.Save the report as BSOD.txt.Open BSOD.txt in Notepad, copy all content and paste it into your next reply.Louis

http://www.bleepingcomputer.com/forums/t/331886/random-bsod-reboots-linked-to-ntoskrnlexe-maybe/
Relevancy 64.5%

Our PC has begun to act up in the last month or so, with increasing freezes and restarts. Thanks for any help in advance. 
 
Here are the problem details from the last restart:

Problem signature:
  Problem Event Name:    BlueScreen
  OS Version:    6.0.6002.2.2.0.768.2
  Locale ID:    1033
 
Additional information about the problem:
  BCCode:    d1
  BCP1:    00000000
  BCP2:    00000002
  BCP3:    00000000
  BCP4:    80741395
  OS Version:    6_0_6002
  Service Pack:    2_0
  Product:    768_1
 
Files that help describe the problem:
  C:\Windows\Minidump\Mini022313-01.dmp
  C:\Users\Captain\AppData\Local\Temp\WER-5882048-0.sysdata.xml
  C:\Users\Captain\AppData\Local\Temp\WER3CE2.tmp.version.txt
 
Read our privacy statement:
  http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0409
 

 

A:Vista BlueScreen Happening Daily

Hello Zombie Superman,If we could gather a little more information about the problem computer, it might prove helpful in pointing toward a solution.1. )  Please follow this link:  BSOD Posting Instructions Windows 8 - Windows 7 - Vista.Follow all instructions with the exception of:Create a new thread HERE and attach the file(s) after step 4Note: Both files, autoruns and JCGriff2 BSOD collection app, of Step 1 need to be in the Documents folder.Next, Upload the zipped folder to a File Sharing website of your choosing because Bleeping Computer has a 512 K only upload limit and this file will be much larger.   For a listing of free File Sharing websites see: http://technojourney.com/trending/best-alternatives-megaupload-and-filesonic-file-hosting/or you may use File Dropper or Box.com.Please post a link to the file in your next post.2. )  To help us get a better look at your computer's hardware, please download and install Speccy by Piriform. (mirror site)Run Speccy and from the top menu, select File --> Publish Snapshot.  Click "Yes" to proceed.Click, Copy to Clipboard and  paste this address into your next post.3. )  Please download MiniToolBox by farbar, save it to your Desktop, then run it.Check the following checkbox:List Installed ProgramsThen click Go.Highlight the contents of  Result.txt.  Copy (Ctrl + C), then Paste (Ctrl + V)  the contents of this file into your next post.  

http://www.bleepingcomputer.com/forums/t/486514/vista-bluescreen-happening-daily/
Relevancy 63.64%

Hi guys This is a brand new homebrew box running Windows Ultimate x RTM and other than a nightly BSOD it is going beautifully Mainly used as a Media Center with a extender BugCheck in eventvwr is as follows The computer has rebooted from a bugcheck The bugcheck was x a xfffff d ff x x xfffff e A dump was saved in C Windows MEMORY DMP Report Id - - This is consistent and happens mainly in the early hours of the morning when the computer is basically doing nothing Doesn't happen under load even gaming I have analysed the Minidump and appended to the end of this post My main concern is that somewhere I have a faulty component in which case I would raise a support call or is this simply a Windows issue which will be picked up by system BSOD - Daily New MS in due course All help welcome My system specs are in my profile kd gt analyze -v Bugcheck Analysis IRQL NOT LESS OR EQUAL a An attempt was made to access New system - Daily BSOD a pageable or completely invalid address at an interrupt request level IRQL that is too high This is usually caused by drivers using improper addresses If a kernel debugger is available get the stack backtrace Arguments Arg fffff b ff memory referenced Arg IRQL Arg bitfield bit value read operation write operation bit value not an execute operation execute operation only on chips which support this level of status Arg fffff e address which referenced memory Debugging Details ------------------ WRITE ADDRESS GetPointerFromAddress unable to read from fffff cae e fffff b ff CURRENT IRQL FAULTING IP hal memcpy e fffff e mov qword ptr rcx h rax CUSTOMER CRASH COUNT DEFAULT BUCKET ID VISTA DRIVER FAULT BUGCHECK STR xA PROCESS NAME System TRAP FRAME fffff f a -- trap xfffff f a NOTE The trap frame does not contain all registers Some register values may be zeroed or incorrect rax fa beeede rbx rcx fffff b fe rdx fffffffff e rsi rdi rip fffff e rsp fffff f ba rbp r r r c f f fb r fffff b r r r r iopl nv up ei ng nz na pe nc hal memcpy x e fffff e mov qword ptr rcx h rax ds fffff b ff Resetting default scope LAST CONTROL TRANSFER from fffff a to fffff a f STACK TEXT fffff f c fffff a a fffff b ff nt KeBugCheckEx fffff f d fffff a e fffffa f fffff b nt KiBugCheckDispatch x fffff f a fffff e fffff fe e fffff b eeb fffffa e e nt KiPageFault x fffff f ba fffff fe e fffff b eeb fffffa e e fffffa dfc hal memcpy x e fffff f bb fffff fe a fffffa ee ca fffffa a ce hal HalpDmaSyncMapBuffers x bd fffff f c fffff fe f fffffa ee ca fffff b eeb fffffa a ff hal HalpDmaFlushScatterTransfer xae fffff f cb fffff fe d fffffa a fffff b eeb ff fffffa e e hal IoFlushAdapterBuffers xaf fffff f cf fffff a b fffffa a fffffa fffffa fffffa a hal HalPutScatterGatherList x fffff f d fffff a bab fffffa a fffffa db a fffff f e fffffa a USBPORT USBPORT Core iCompleteDoneTransfer x f fffff f e fffff a f fffffa ea fffffa a fffffa a USBPORT USBPORT Core iIrpCsqCompleteDoneTransfer x a fffff f e fffff a af fffffa fffffa e fffffa ea USBPORT USBPORT Core UsbIocDpc Worker xf fffff f ed fffff a dc fffff e fffffa ea fffffa ec USBPORT USBPORT Xdpc Worker x d fffff f f fffff a e e b b fffffa d fffff a adb nt KiRetireDpcList x bc fffff f fb fffff a de c nt KxRetireDpcList x fffff nt KiDispatchInterruptContinue STACK COMMAND kb FOLLOWUP IP USBPORT USBPORT Core iCompleteDoneTransfer f fffff a b c xor r d r d SYMBOL STACK INDEX SYMBOL NAME USBPORT USBPORT Core iCompleteDoneTransfer f FOLLOWUP NAME MachineOwner MODULE NAME USBPORT IMAGE NAME USBPORT SYS DEBUG FLR IMAGE TIMESTAMP a bcc FAILURE BUCKET ID X xA USBPORT USBPORT Core iCompleteDoneTransfer f BUCKET ID X xA USBPORT USBPORT Core iCompleteDoneTransfer f Followup MachineOwner ---------

A:New system - Daily BSOD

Uploaded Minidump file for analysis by others.

http://www.sevenforums.com/bsod-help-support/24130-new-system-daily-bsod.html
Relevancy 63.21%

First few times, I had to do something to my BIOS, then the next problem was my display driver, BAD_POOL_HEADER, USB drive problem, now the next message just displays as if it wast he first time I've seen this screen.


I followed the mini kernel dump collection faq, so here's my upload, I think I did it right. Please help me find the problem and a solution for it.

A:32-bit BSOD, happens daily, having to do system restore a lot.

Hello and welcome to TSF, YOitzODELLE!

I'm an amateur debugger - so I apologize if I'm not as specific as most.

BCCode 0x8E - KERNEL_MODE_EXCEPTION_NOT_HANDLED_M

I Checked the System Log in Event Viewer for additional error messages that might help identify the device or driver that is causing bug check 0x8E - I saw nothing of importance except a few updates from today - 2009-08-21T14:46:17.813, They could have interfered with some drivers/programs - but I'm not sure yet.

You said you had messed with your BIOS - how so?
What was your display problem?
What was your USB problem? - Is there anything currently in any of your USB ports?
You also mentioned system restore - did you do so?
You also mentioned you're getting BSODs daily - why did I only get one?

Analysis HERE:


Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\Undocked Windy\Desktop\TSF_Vista_Support\TSF_Vista_Support\Mini082109-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*DownstreamStore*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows Server 2008/Windows Vista Kernel Version 6002 (Service Pack 2) MP (2 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 6002.18005.x86fre.lh_sp2rtm.090410-1830
Machine Name:
Kernel base = 0x82216000 PsLoadedModuleList = 0x8232dc70
Debug session time: Fri Aug 21 03:50:39.549 2009 (GMT-7)
System Uptime: 0 days 0:04:54.236
Loading Kernel Symbols
...............................................................
................................................................
...............................................
Loading User Symbols
Loading unloaded module list
.................................
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1000008E, {c0000005, 823047d5, acc799cc, 0}

*** WARNING: Unable to verify timestamp for AVGIDSFilter.sys
*** ERROR: Module load completed but symbols could not be loaded for AVGIDSFilter.sys
Probably caused by : Pool_Corruption ( nt!ExDeferredFreePool+1be )

Followup: Pool_corruption
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

KERNEL_MODE_EXCEPTION_NOT_HANDLED_M (1000008e)
This is a very common bugcheck. Usually the exception address pinpoints
the driver/function that caused the problem. Always note this address
as well as the link date of the driver/image that contains this address.
Some common problems are exception code 0x80000003. This means a hard
coded breakpoint or assertion was hit, but this system was booted
/NODEBUG. This is not supposed to happen as developers should never have
hardcoded breakpoints in retail code, but ...
If this happens, make sure a debugger gets connected, and the
system is booted /DEBUG. This will let us see why this breakpoint is
happening.
Arguments:
Arg1: c0000005, The exception code that was not handled
Arg2: 823047d5, The address that the exception occurred at
Arg3: acc799cc, Trap Frame
Arg4: 00000000

Debugging Details:
------------------
... Read more

http://www.techsupportforum.com/forums/f299/32-bit-bsod-happens-daily-having-to-do-system-restore-a-lot-406883.html
Relevancy 63.21%

Please can someone help or advise, my stystem has started to become very unstable.
It crashes at least once on a daily bases.
I have attched a dump file.
Please donot consider the USB 3.0 Crash that was my fault wrong driver
many thanks

http://www.sevenforums.com/bsod-help-support/392547-bsod-system-crashing-daily.html
Relevancy 63.21%

I have an ASUS Vivotab running Windows 8. I am seeing that the service process hits 100% disk usage from roughly 4:58PM - 5:04PM daily. I've made sure that my antivirus is't downloading updates or running during that time, same with Windows Update, Live Update, etc. How can I find what specific process is running during that time that is killing the machine given I know when to watch for it?

Thanks!

A:100% Disk Usage - Happening at specific times daily

Welcome to the forums drandersoninc,give this a try,download process explorer and see who is kicking in at that time.A first guess is that windows are backing up in the backround,if you have not configured the feature otherwise.Please do fill in your system specifications,really helpfull for future references.

http://www.eightforums.com/performance-maintenance/31942-100-disk-usage-happening-specific-times-daily.html
Relevancy 62.35%

I continue to get the BSOD on my computer. I thought it was a video driver problem after installing a new AMD HD6570 graphics card, but have uninsalled and disabled, and continue to get the BSOD. I'm not sure what might be causing it, so I have attached a copy of the actual ble screen error along with perfmon report and windows NT6_BSOD file. I hope someone can help me with this annoying problem. Thanks for all help in advance.

Phil

Processor: AMD Phenom(tm)9150e Quad-Core Processor 1.80GHz
Memory 4.00 GB
System type: 64-bit Windows 7 Professional
Computer: HP Pavilion a6000

Attachment 199784

Attachment 199785

Attachment 199786

A:BSOD happening sometime during system idel; random

Bug check 0x50 usually occurs after the installation of faulty hardware or in the event of failure of installed hardware (usually related to defective RAM, be it main memory, L2 RAM cache, or video RAM).
Another common cause is the installation of a faulty system service.
Antivirus software can also trigger this error, as can a corrupted NTFS volume.
What malware app are you running?

http://www.sevenforums.com/bsod-help-support/215786-bsod-happening-sometime-during-system-idel-random.html
Relevancy 62.35%

I have a new gaming system I purchased from IBUYPOWER in Dec Since first turning it on I would come in to pc next day and it would be a black screen post bios stating boot drive not available I would alt - ctrl - del and reboot and it would not find Daily / system auto restarts bsod boot drive Next Daily system auto restarts / bsod I would go to bios and the primary system boot drive c would be missing in bios also missing in intel ich raid bios screen I then would turn pc off via power button and turn it back on and it would now see missing hard drive boot c drive I would still have to go back to bios to tell bios which hd was boot hd reset boot order because this setting would not remain after the system restarted itself and had quot the problem quot overnight I began to work with IBUYPOWER and first I went through the following tests reloaded windows and tried to download latest drivers for all devices motherboard etc made acronis image of this clean install with latest drivers tried changing which ssd hard drive is boot c drive via acronis i have two ssd gb one as c drive one as d data drive for games changed sata cables for the boot c drive changed sata ports for boot c drive changed bios setting from raid no raid configured on asus just raid on bios with no raid setup on intel ich r bios screen to ahci After doing the above and same auto reboots with stuck boot screen still happening IBUYPOWER began sending rma parts First we did the adata ssd s hard drive Installed clean windows install etc same problem Next they rma'd the asus motherboard Two days after I carefully installed same thing Auto restart with screen at post bios quot no boot drive quot on screen Only one time has and actual dump file been created I have attached as requested Points to memory I think Last night after reviewing my windows settings I noticed that auto restart was set in case of crash dump file I removed that setting and over night I believe the same auto restart happened but in AM I had a blue screen Oddly enough no dump or mini dump is created just stuck at blue screen x f Its same looking bsod as the only dump file that has acutally been made in past I also wanted to mention I orginally had the asus bios setup by IBUYPOWER as their default settings with no real overclocking The problems were happening with no overclocking Since then just to see if it was their settings causing an issue I have setup overclocking with default asus easy settings of extreme you set this in bios and it sets all settings based on its database I stress tested checked temps it all looked great After today and the same auto restarts blue screens happening I set the asus bios to gaming and auto which is non overclock I dont think the bios settings where the issue at all but I just dont want to take any chances I am a pretty good troubleshooter and although I am dissapointed this is happening with my brand new gaming rig I know these type of things can happend and I am looking forward to solving it I would really appreciate an expert to review my files to advise what they think could be a solution or path to go on My next step is to call IBUYPOWER to get them to RMA the memory I am just cautiuos that it could be a software driver issue Basic system info as follows Win Pro bit dec gaming rig gb v-color mhz ram asus rampage III gene motherboard casegears w power supply evga nvidia gtx gpu i ibuypower mm water cooling for cpu Thanks for looking at my problem in advance

A:Daily system auto restarts / bsod

I figured out why there has been no mini or regular dumps done since that one single one i zipped and attached before. Now that I have the windows auto restat turned off.

The pc will blue screen ( I have attached a couple of pictures of the todays and yesterdays bsod) and for some reason the c drive cannot be seen at that point by windows so it cannot write to the hd. The only way it can see the c drive again is if I hold down the power button, shut pc down via power , then push power button on again. then it comes up with no issues other than telling me windows shutdown incorrectly before and if i want to run safe mode.

Still need any input from any one that can help ...

http://www.sevenforums.com/bsod-help-support/136226-daily-system-auto-restarts-bsod.html
Relevancy 62.35%

I am getting the BSOD shutdown daily with inability to recover. System disc seems to be constantly running. I'm attaching my file folder with details from the crash and dump. Beyond frustrated and imagine this to be a simple fix but need help. Thank you!

A:BSOD Randomly Shutting System Down Daily

Hello Michael and welcome can you get into safe mode? If so run these two for starters.


http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html

http://www.sevenforums.com/tutorials/433-disk-check.html<= DO NOT run on a SSD
Plus some system specs would be handy
System Info - See Your System Specs
and
run Speccy to see what the temps are and post same if you can Speccy - Download

http://www.sevenforums.com/bsod-help-support/312439-bsod-randomly-shutting-system-down-daily.html
Relevancy 61.92%

Hello thank you to anyone reading this and will to help me I have just recent build this machine days ago to be exact and since then i have had many a BSOD and now i am getting sick of it It tends to happen when i try to do more than one thing a lot of the time e g downloading something in steam and opening another game thats been the most frequient My system specs are Intel Core i k Asus Masximus IV Gene-Z G Skill RipjawsX gb x Noctua HD-D Evga GeForce GTX ti Seagate Barracuda tb rpm mb cache SATA III OS and Storage Hitachi gb SATA II music drive OCZ w ZT Windows home premium bit sp OEM This is what windows says when it recovers Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode f BCP BCP BCP F BCP FFFFF C OS Version Service Pack Product Files that help describe the problem C Windows Minidump - - dmp C Users Sam AppData Local Temp WER- - sysdata xml Read our privacy statement online BSOD a newly on happening frequiently system built Windows Privacy Statement - Microsoft Windows If the online privacy statement is not available please read our privacy statement offline C Windows system en-US erofflps txt Attached is my minidump file which i gather is important to helping solve the issue as many people also attach it Would appreciate any help in a huge way Thank you for reading and BSOD happening frequiently on a newly built system thank you in advance for any help given

A:BSOD happening frequiently on a newly built system

Several software issues

Related to VirtuWDDM.sys LucidInterop WDDM Driver from Lucidlogix Inc.

Related to cfosspeed.sys cFosSpeed Driver from cFos Software GmbH.

Most of these are related to dxgmms1.sys (your DirectX driver)

I would start with a system file check

SFC /SCANNOW Command - System File Checker

How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista or on Windows 7
Diagnosing basic problems with DirectX

http://www.sevenforums.com/bsod-help-support/213021-bsod-happening-frequiently-newly-built-system.html
Relevancy 61.92%

Hi folks Signed up to the forum specifically to ask about this problem I'm having with my -month old laptop It's an Acer Aspire V - G Full specs are on my system specs page Basically I've been experiencing a combination of BSOD and System Freeze Crash problems several times on a daily basis over the past few weeks The first time experienced the BSOD was around three weeks after buying this laptop I just shrugged it off as a fluke at first but then it started becoming more frequent Random times Freeze several System and BSOD daily and now the system also just freezes out of the blue I haven't identified a specific pattern when it encounters a BSOD and when the system freezes The closest to a pattern that I can identify is that every morning when I wake up I wake up to my laptop already having the BSOD Totally clueless here I've attached the zip file Random BSOD and System Freeze several times daily of my diagnostic logs so that maybe one of you gurus out there can tell me what you think is going wrong with my system Rest assured when I wake up tomorrow my laptop will have the BSOD again if I leave it open

A:Random BSOD and System Freeze several times daily

Welcome,

While we wait for a BSOD analyst to help out further, it might help if you can check your system for corruptions.

Can you run a sfc /scannow from an elevated command prompt, and report back what it finds?

SFC /SCANNOW Command - System File Checker

Regards,
Golden

http://www.sevenforums.com/bsod-help-support/250125-random-bsod-system-freeze-several-times-daily.html
Relevancy 61.06%

Hi,

PC reboots daily at 11:45pm. How can I track down the source of this daily restart? Thanks...

A:PC reboots daily at 11:45pm

Look in event viewer to see if it shows what caused the restart (maybe a scheduled task?).
This tutorial by Brink should help:
Shut Down - View Details of Last Shutdown of Computer

http://www.sevenforums.com/general-discussion/350325-pc-reboots-daily-11-45pm.html
Relevancy 61.06%

Sooo, it started when I kept having problems with a consistent connection.... I check the router's DHCP list of connected computers, and there are 8 of them.... we only have 3 pcs. So, I decided to enable WPA-PSK security. All the leechers are gone, but now, I have to reset the router every day or the wireless cards dont work (wired is fine). By "dont work" i mean the wireless computers will completely lose network access (cant access router), not just internet... but the wired pc is fine. It didn't have this problem when security is off, so technically I could just set it up for MAC address filtering, but I would rather have the security since there are so many people nearby. Please tell me there is an easy fix for this....

Belkin F5D7231-4 Router
Netgear WG111v2 USB Wireless

thanks
 

Relevancy 61.06%

A few months previous I installed a m a asus motherboard along with some RAM and a new HDD Crashing problems have continued to occur over the months since then I have reinstalled windows multiple times and attempted to test many of the components and updated most of the drivers I know that my PCI bus ATI I O communications processor SMBus controller and AsMedia XHCI controllers are out of date according to driver detective but I m not sure how to update those as I have previously updated the BIOS and chipsets for the mobo Most frequently problems occur when gaming In some cases the screen will freeze and the system will lock up This freezing will either require a manaul reboot but reboots gaming during stalls, and BSOD, system system often it does so of its own accord Other games TF however have caused the screen to either scramble such that the display shows multiple angles cut together There s often also an audible screech of static accompanying this disruption After I close the program other programs begin crashing mumble chrome and almost nothing will open properly I have tested the ram sticks both separately and together In both cases it has gone through passes of memtest I used prime to test the cpu cleaned the heatsink after the temps were high performed the prime test again and observed reasonable temps The video card that was in the system previously was removed and replaced with a Any help is appreciated Below is the zip file I was asked to submit http www mediafire com file x zyhtpya bk c Windows Vista jcgriff zip

A:BSOD, system stalls, and system reboots during gaming

I can find very little info pertaining to the system crashes/BSODs.Crash dumps are apparently not being created: The reason is not clear, as the system settings are configured to record and save the dumps. It will therefore be necessary for you to record and post details that you see on-screen of the BSOD error messages.Please disable "automatic restart on system failure":How To Disable the Automatic Restart on System Failure in Windows 7When the system crashes, it will not re-start: Instead, you will see a BSOD with error message.
Record the error message details (contained in the areas outlined in red, in the above example image), and post in a reply.It does seem likely that there may be a serious hardware issue and the system is unable to record and save the crash dumps. I would like to know whether or not you actually do get to see a BSOD error message at all.

http://www.bleepingcomputer.com/forums/t/459129/bsod-system-stalls-and-system-reboots-during-gaming/
Relevancy 60.63%

windows enterprise bit Intel I - LGA core- quad core motherboard Asus P x D-E ram Gig Corsair gig sticks DDR HD WD black Terra bt been studying this problem for a few months now trying to isolate its cause but only recently have I been able to system more 3-4 month happening past BSOD frequently full crash / been do this with much luck as its crashes have become more frequent I have a new Cisco external network adapter usb and I run Minecraft I thought either of these were the cause as a lot of crashes took place while BSOD / full system crash been happening more frequently past 3-4 month they were running but have just witnessed a crash with no MC and then with no adapter plugged in albeit MC was running also a few times when a flash drive was plugged in the computer crashed the moment it was plugged in I thought maybe a hardware issue with the back usb ports but it doesn't add up as the computer crashes even when no usb is plugged in except for the extension which I plug the adapter in although the adapter was removed as a side note this build has been glitchy from the get go and I've done a clean install over times in the first year alone perhaps this is all connected

A:BSOD / full system crash been happening more frequently past 3-4 month

Have you contacted your IT department for help? Does the computer act up when hooked to the network or domain.
30 installs in one year is huge. Where did you get your copy of Enterprise? It might have a flaw in it.

http://www.sevenforums.com/bsod-help-support/266690-bsod-full-system-crash-been-happening-more-frequently-past-3-4-month.html
Relevancy 60.2%

Hi For the last days PC 2 apart daily almost freezes itself reboots and or months or not sure exactly how many I have had my PC freezing and rebooting itself at random times regardless of what I was doing sometimes it even froze while it was idle Anyway I didn t mind just letting it restart on its own or me restarting it when it freezes but PC freezes and reboots itself almost daily or 2 days apart lately the issue has become a bit more serious when it wouldn t even log in to Windows anymore Sometimes I would just restart the PC and then it would get stuck on PC freezes and reboots itself almost daily or 2 days apart the loading Windows screen that dark screen with the WindowsXP logo and loading bar if you know what I mean What s more over the last couple of weeks I have been always asked to click on my user account icon before I could log in to Windows While this is not something to whine about it surely is something misplaced since I have never set anything to ask me for logging in by clicking on my user account icon There definitely must be an application or something that changed the settings or something in the configuration of my OS And speaking of applications there is a file called winappp exe that I have googled for some info and it seems like a spyware or something that bothers lots of folks but that no one knows how to get rid of I use AVG as antivirus and my antivirus won t even detect it I can see this winappp exe file clearly in the quot Documents and Settings gt John gt Application Data quot folder and I could easily remove it but I don t know if this is recommended or of any use The file may be installed carrying with it other files too and by just removing it the problem may just not go away This winapp exe file is also generating an error whenever I log into Windows but the error doesn t seem something dangerous since all I have to do for it to go away is to click quot ok quot on the error message pop-up Anyway that would be all for now If anything at least please let me know how to stop Windows playing tricks on me if not fixing all of the other issues user account icon clicking when trying to log into Windows or removing the winappp exe file as well I am very scared at the thought of powering the PC one morning and not being able to log into Windows anymore thus losing everything I have and having to go through re-installing Windows again and of all the other dozens of programs I have and use Thanks nbsp

Relevancy 60.2%

Being new to times daily multiple PC reboots TSF I apologize if I am in the wrong forum for this inquiry I have a PC that reboots multiple times daily I suspect Bitdefender as the cause but I am unsure The HijackThis log for the machine is as follows Logfile of Trend Micro HijackThis v Scan saved at AM on Platform Windows XP SP WinNT MSIE Internet Explorer v SP Boot mode Normal Running processes C WINDOWS System smss exe C WINDOWS system winlogon exe C WINDOWS system services exe C WINDOWS system lsass exe C WINDOWS system svchost exe C WINDOWS System svchost PC reboots multiple times daily exe C WINDOWS system brsvc a exe C WINDOWS system spoolsv exe C WINDOWS PC reboots multiple times daily system brss a exe C Program Files Viewpoint Common ViewpointService exe C Program Files RealVNC WinVNC WinVNC exe C Program Files Common Files Softwin BitDefender Communicator xcommsvr exe C Program Files Common Files Softwin BitDefender Scan Server bdss exe C Program Files Softwin BitDefender vsserv exe C WINDOWS Explorer PC reboots multiple times daily EXE C Program Files Softwin BitDefender bdmcon exe C Program Files Softwin BitDefender bdnagent exe C WINDOWS system wscntfy exe C WINDOWS system wuauclt exe C Program Files Internet Explorer iexplore exe C dnld hijackthis HiJackThis exe R - HKCU Software Microsoft Internet Explorer Main Search Bar http go compaq com Q CDT bl asp R - HKCU Software Microsoft Internet Explorer Main Start Page http R - HKLM Software Microsoft Internet Explorer Main Search Bar http go compaq com Q CDT bl asp R - HKLM Software Microsoft Internet Explorer Main Start Page http go compaq com Q CDT bl asp O - BHO AcroIEHlprObj Class - E F-C D - D -B D- B D BE B - C Program Files Adobe Acrobat ActiveX AcroIEHelper dll O - BHO no name - - F - D - - D F - C PROGRA SPYBOT SDHelper dll O - BHO SSVHelper Class - BB-D F - C-B EB-D DAF D D - C Program Files Java jre bin ssv dll O - HKLM Run WinVNC quot C Program Files RealVNC WinVNC WinVNC exe quot -servicehelper O - HKLM Run BDMCon quot C Program Files Softwin BitDefender bdmcon exe quot O - HKLM Run BDNewsAgent quot C Program Files Softwin BitDefender bdnagent exe quot O - Extra context menu item E amp xport to Microsoft Excel - res C PROGRA MICROS OFFICE EXCEL EXE O - Extra button no name - B E C - FCB- CF-AAA - C - C Program Files Java jre bin ssv dll O - Extra 'Tools' menuitem Sun Java Console - B E C - FCB- CF-AAA - C - C Program Files Java jre bin ssv dll O - Extra button Research - B - CC- C -B BE- C C A - C PROGRA MICROS OFFICE REFIEBAR DLL O - Extra button Messenger - FB F -F - d -BB E- C F - C Program Files Messenger msmsgs exe O - Extra 'Tools' menuitem Windows Messenger - FB F -F - d -BB E- C F - C Program Files Messenger msmsgs exe O - Trusted Zone bullhorn com O - Trusted Zone bullhornstaffing com O - DPF BC - C- - AE -A E C FE BullhornConfigTool activeXComponent - http www bullhornstaffing com Bull figactivex CAB O - DPF B-B - D-A D -FCFDF E C WUWebControl Class - http update microsoft com windowsu O - DPF AB E D-CDD - D -B E - B AFF E GeacRevw Control - http rmlsfl mlxchange com l IRCSharc cab O - HKLM System CCS Services Tcpip A DF - F - C B- - ACB DC NameServer O - HKLM System CCS Services Tcpip C D A-EA - -BA - E AD A NameServer O - HKLM System CCS Services Tcpip B EFB - - BE - A E-DF EA EF D NameServer O - HKLM System CS Services Tcpip A DF - F - C B- - ACB DC NameServer O - AppInit DLLs sockspy dll sockspy dll sockspy dll sockspy dll sockspy dll sockspy dll sockspy dll sockspy dll sockspy dll O - Service BitDefender Scan Server bdss - Unknown owner - C Program Files Common Files Softwin BitDefender Scan Server bdss exe O - Service BrSplService Brother XP spl Service - brother Industries Ltd - C WINDOWS system brsvc a exe O - Service Viewpoint Manager Service - Viewpoint Corporation - C Program Files Viewpoint Common ViewpointService exe O - Service BitDefender Virus Shield VSSERV - SOFTWIN S R L - C Program Files Softwin BitDefender vsserv exe O - Se... Read more

http://www.techsupportforum.com/forums/f284/pc-reboots-multiple-times-daily-210766.html
Relevancy 59.34%

Hello

I've got an issue with daily BSODs,

The BSODs come in row, so i usually get 2-3 in a row and then my computer boots up well

I've looked at the minidumps, but my technical knowlegde is limited, so i can't really spot the problem, though the minidump thinks Ntoskrnl is the cause

So if any would be kind to look at them and give me some advice
 

A:Daily BSODs on Win7, Ntoskrnl

Hello,

Start by uninstalling the Asus PC Probe utility. Especially this older one is known to cause BSODs.
Code:
ghaio.sys Mon May 30 05:34:05 2005 (429ADE0D)
Next, remove Daemon Tools or similar programs, as they are using SPTD. SPTD is a driver known to cause BSODs since Vista.
Code:
aagr6zj9.SYS Tue Jul 14 17:12:55 2009 (4A5CF4D7) -- a driver dynamically allocated by SPTD
sptd.sys Sun Oct 11 16:55:14 2009 (4AD24632)
Remove SPTD itself with this tool: http://www.duplexsecure.com/download/SPTDinst-v174-x64.exe

While not blamed, Avast is known to cause some BSODs. I suggest you remove it with this tool: http://files.avast.com/files/eng/aswclear5.exe

MSE is the recommended replacement:

http://www.microsoft.com/security_essentials

Update your Realtek NIC drivers: http://218.210.127.131/downloads/do...d=5&Level=5&Conn=4&DownTypeID=3&GetDown=false
Code:
Rt64win7.sys Thu Jul 30 07:58:43 2009 (4A718AF3)
Update or remove LogMeIn:
Code:
hamachi.sys Thu Feb 19 05:36:41 2009 (499D3639)
If the BSODs persist, could you upload a full BSOD report? Follow the directions here: http://www.jcgriff2.com/BSODpostinstructions.html

Zip up the output folder, and upload it to Rapidshare or a similar site.

...Summary of the Dumps:
Code:
[font=lucida console]
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Mon Nov 1 06:15:14.265 2010 (UTC - 4:00)
System Uptime: 0 days 0:01:47.434
BugCheck 1E, {ffffffffc0000096, fffff80003c680fa, 0, 0}
Probably caused by : ntkrnlmp.exe ( nt!KeStackAttachProcess+1ba )
BUGCHECK_STR: 0x1E_c0000096
จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Mon Nov 1 02:53:55.416 2010 (UTC - 4:00)
System Uptime: 0 days 0:04:01.585
BugCheck 50, {fffff880095748e8, 0, fffffa8004683012, 0}
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+42837 )
BUGCHECK_STR: 0x50
PROCESS_NAME: System
จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ[/font]

 

http://www.techspot.com/community/topics/daily-bsods-on-win7-ntoskrnl.155868/
Relevancy 59.34%

So I troubleshoot a lot of computers but more on the software level so having some multiple daily / ntoskrnl.exe system_service_exception trouble here Listed all specs when registering in my profile Just built a new desktop it's been together for about a week and I've been having what appear to be random BSOD I have two pairs of raid running and a tb sata on the end All HDD not SSD I have booted and run tests with multiple system_service_exception / ntoskrnl.exe daily memtest and didn't receive any errors All parts are brand new not that they can't be faulty but still I did have a wireless pci card in for a few days that was giving me trouble and the BSOD are less frequent now that is out but are still persistent Transferring files might be causing it but I think it's just a coincidence because I'm moving so many files right now re-organizing and restoring to the new PC it happened while copying and not copying and while copying to from all HDD combinations Ex multiple system_service_exception / ntoskrnl.exe daily copting to from HDD's amp amp amp They appear random sometimes the computer is just sitting sometimes it's in the middle of work multiple system_service_exception / ntoskrnl.exe daily Looking at the BSOD dumps thought I'm new to doing this I think I see quot ntoskrnl exe quot always there right before the crash Uploading the dumps now so y'all can see Thanks in advance for your help

A:multiple system_service_exception / ntoskrnl.exe daily

What's the make/model/wattage and age of your Power Supply?

If you're overclocking, please stop the overclock while we're troubleshooting. Feel free to resume the overclock once the system has been stabilized.

I suspect a hardware problem - but the dump file results don't support that conclusion 100% - so there's 2 things to try:

1) Run Driver Verifier according to these instructions: Driver Verifier Settings

2) Run these free hardware diagnostics: Hardware Diagnostics

Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable! :

AsUpIO.sys Mon Aug 2 22:47:59 2010 (4C57835F)
ASUS hardware monitoring software related
http://www.carrona.org/drivers/driver.php?id=AsUpIO.sys

speedfan.sys Fri Mar 18 12:08:46 2011 (4D83838E)
SpeedFan
http://www.carrona.org/drivers/driver.php?id=speedfan.sys

Analysis:
The following is for informational purposes only.

Code:
**************************Tue Mar 12 09:32:37.077 2013 (UTC - 4:00)**************************
Loading Dump File [C:\Users\Owner\SysnativeBSODApps\031213-21465-01.dmp]
Windows 8 Kernel Version 9200 MP (8 procs) Free x64
Built by: 9200.16496.amd64fre.win8_gdr.130108-1504
System Uptime:0 days 2:07:45.725
Probably caused by :win32k.sys ( win32k!SURFACE::bDeleteSurface+5b6 )
BugCheck 1E, {ffffffffc0000005, fffff800a8346372, 0, ffffffffffffffff}
BugCheck Info: KMODE_EXCEPTION_NOT_HANDLED (1e)
Arguments:
Arg1: ffffffffc0000005, The exception code that was not handled
Arg2: fffff800a8346372, The address that the exception occurred at
Arg3: 0000000000000000, Parameter 0 of the exception
Arg4: ffffffffffffffff, Parameter 1 of the exception
BUGCHECK_STR: 0x1E_c0000005_R
PROCESS_NAME: chrome.exe
FAILURE_BUCKET_ID: 0x1E_c0000005_R_win32k!SURFACE::bDeleteSurface
BIOS Version 1503
BIOS Release Date 01/16/2013
Manufacturer To be filled by O.E.M.
Product Name To be filled by O.E.M.
??????????????????????????????????????????????????????????????????????????????????????``
**************************Mon Mar 11 20:17:10.478 2013 (UTC - 4:00)**************************
Loading Dump File [C:\Users\Owner\SysnativeBSODApps\031113-20888-01.dmp]
Windows 8 Kernel Version 9200 MP (8 procs) Free x64
Built by: 9200.16496.amd64fre.win8_gdr.130108-1504
System Uptime:0 days 2:35:37.126
Probably caused by :afd.sys ( afd!AfdPoll32+26d )
BugCheck 3B, {c0000005, fffff8008d6de372, fffff88013401ce0, 0}
BugCheck Info: SYSTEM_SERVICE_EXCEPTION (3b)
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff8008d6de372, Address of the instruction which caused the bugcheck
Arg3: fffff88013401ce0, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.
BUGCHECK_STR: 0x3B
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: aerofsd.exe
FAILURE_BUCKET_ID: 0x3B_afd!AfdPoll32
BIOS Version 1503
BIOS Release Date 01/16/2013
Manufacturer To be filled by O.E.M.
Product Name To be filled by O.E.M.
??????????????????????????????????????????????????????????????????????????????????????``
**************************Mon Mar 11 17:40:42.022 2013 (UTC - 4:00)**************************
Loading Dump File [C:\Users\Owner\SysnativeBSODApps\031113-22432-01.dmp]
Windows 8 Kernel Version 9200 MP (8 procs) Free x64
Built by: 9200.16496.amd64fre.win8_gdr.130108-1504
System Uptime:0 days 0:19:51.669
Probably caused by :ntkrnlmp.exe ( nt!KxWaitForLockOwnerShip+12 )
BugCheck 3B, {c0000005, fffff801414d8372, fffff880121747b0, 0}
BugCheck Info: SYSTEM_SERVICE_EXCEPTION (3b)
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff801414d8372,... Read more

http://www.eightforums.com/bsod-crashes-debugging/22000-multiple-system_service_exception-ntoskrnl-exe-daily.html
Relevancy 58.91%

Each day I find that my 64bit error Dcom Win7 reboots with daily PC computer has rebooted and is at the logon screen I have changed my Windows updates to Check for updates but let me Win7 64bit PC reboots daily with Dcom error choose to rule that out as the cause of the reboot When I look Win7 64bit PC reboots daily with Dcom error in my application Event Viewer I see Faulting application name svchost exe DcomLaunch version time stamp x a bc c Faulting module name unknown version time stamp x Exception code xc Fault offset x d b Faulting process id x c Faulting application start time x cfbf cfd e Faulting application path C Windows system svchost exe Faulting module path unknown Report Id aff - c - e -a ca- de aaa This is around the time that the PC rebooted In the System Event Viewer it shows The DCOM Server Process Launcher service terminated unexpectedly It has done this time s The following corrective action will be taken in milliseconds Reboot the machine at the same time Recently AVG AntiVirus Free has been reporitng some JS FakeCodec errors I ran a fresh scan yesterday and removed of them Malwarebytes returns no issues Today my PC rebooted again Not sure if I have a Virus or an application issue so posting here Please let me know what additional infomration I should provide and thank you for your assistance Windows Enterprise Bit AMD FX Eight Core Processor GB Ram

A:Win7 64bit PC reboots daily with Dcom error

Hello JPinMD, run these next and let's see how it is.Please download MiniToolBox, save it to your desktop and run it.Checkmark the following checkboxes:Flush DNSReport IE Proxy SettingsReset IE Proxy SettingsReport FF Proxy SettingsReset FF Proxy SettingsList content of HostsList IP configurationList Winsock EntriesList last 10 Event Viewer logList Installed ProgramsList Users, Partitions and Memory size.Click Go and post the result (Result.txt). A copy of Result.txt will be saved in the same directory the tool is run.Note: When using "Reset FF Proxy Settings" option Firefox should be closed.Download TDSSKiller and save it to your desktop.Extract (unzip) its contents to your desktop.Open the TDSSKiller folder and doubleclick on TDSSKiller.exe to run the application, then on Start Scan.If an infected file is detected, the default action will be Cure, click on Continue.If a suspicious file is detected, the default action will be Skip, click on Continue.It may ask you to reboot the computer to complete the process. Click on Reboot Now.If no reboot is require, click on Report. A log file should appear. Please copy and paste the contents of that file here.If a reboot is required, the report can also be found in your root directory (usually C:\ folder) in the form of TDSSKiller_xxxx_log.txt. Please copy and paste the contents of that file here....ADW CleanerPlease download AdwCleaner by Xplode and save to your Desktop.Double-click on AdwCleaner.exe to run the tool.Vista/Windows 7/8 users right-click and select Run As Administrator.Click on the Scan button.AdwCleaner will begin...be patient as the scan may take some time to complete.After the scan has finished, click on the Report button...a logfile (AdwCleaner[R0].txt) will open in Notepad for review.After reviewing the log, click on the Clean button.Press OK when asked to close all programs and follow the onscreen prompts.Press OK again to allow AdwCleaner to restart the computer and complete the removal process.After rebooting, a logfile report (AdwCleaner[S0].txt) will open automatically.Copy and paste the contents of that logfile in your next reply.A copy of all logfiles are saved in the C:\AdwCleaner folder which was created when running the tool.-- Note: The contents of the AdwCleaner log file may be confusing. Unless you see a program name that you recognize and know should not be removed, don't worry about it. If you see an entry you want to keep, return to AdwCleaner before cleaning...all detected items will be listed (and checked) in each tab. Click on each one and uncheck any items you want to keep (except you cannot uncheck Chrome and Firefox preferences lines).. Please download Junkware Removal Tool to your desktop.Shut down your protection software now to avoid potential conflicts.Run the tool by double-clicking it. If you are using Windows Vista, 7, or 8; instead of double-clicking, right-mouse click JRT.exe and select "Run as Administrator".The tool will open and start scanning your system.Please be patient as this can take a while to complete depending on your system's specifications.On completion, a log (JRT.txt) is saved to your desktop and will automatically open.Post the contents of JRT.txt into your next message.....Last run ESET.Hold down Control and click on this link to open ESET OnlineScan in a new window.Click the button.For alternate browsers only: (Microsoft Internet Explorer users can skip these steps)Click on esetsmartinstaller_enu.exe to download the ESET Smart Installer. Save it to your desktop.Double click on the icon on your desktop.Check "YES, I accept the Terms of Use."Click the Start button.Accept any security warnings from your browser.Under scan settings, check "Scan Archives" and "Remove found threats" Click Advanced settings and select the following:Scan potentially unwanted applicationsScan for potentially unsafe applicationsEnable Anti-Stealth technologyESET will then download updates for itself, install itself, and begin scanning your ... Read more

http://www.bleepingcomputer.com/forums/t/545664/win7-64bit-pc-reboots-daily-with-dcom-error/
Relevancy 58.91%

I believe I have a virus on my PC.  On average, once a day my PC reboots and has an error about DCom failed to respond and system will reboot.My AVG 2014 is finding and giving message about thread Virus Found JS/Fake Codec.  My malbytes scan comes back clean. Also, my SSD keeps filling up.  It is a 250 gig SSD, I recently cleaned up 30 gig of files and moved to another partition.  I had about 10 Gig Free at that time, now less then a week later, I am down below 3 gig free. The C:\Windows\System32\config\systemprofile\AppData\Local\Microsoft\Windows\Temporary Internet Files directory has 94 gb of the  files.
 
Any advice or suggestion would be appreciated, I have been having issues for over a week now.

A:Win7 64bit PC reboots daily with Dcom error

Welcome aboard   Download Security Check from here or here and save it to your Desktop. Double-click SecurityCheck.exe Follow the onscreen instructions inside of the black box. A Notepad document should open automatically called checkup.txt; please post the contents of that document.NOTE 1. If one of your security applications (e.g., third-party firewall) requests permission to allow DIG.EXE access the Internet, allow it to do so.NOTE 2 SecurityCheck may produce some false warning(s), so leave the results reading to me. Please download Farbar Service Scanner (FSS) and run it on the computer with the issue.Make sure the following options are checked:
Internet ServicesWindows FirewallSystem RestoreSecurity Center/Action CenterWindows UpdateWindows DefenderOther ServicesPress "Scan".It will create a log (FSS.txt) in the same directory the tool is run.Please copy and paste the log to your reply. Please download MiniToolBox and run it.Checkmark following boxes:Report IE Proxy SettingsReport FF Proxy SettingsList content of HostsList IP configurationList Winsock EntriesList last 10 Event Viewer logList Installed ProgramsList Devices (do NOT change any settings here)List Users, Partitions and Memory sizeList Restore PointsClick Go and post the result. Please download Malwarebytes Anti-Malware to your desktop.NOTE. If you already have MBAM 2.0 installed scroll down.Double-click mbam-setup-2.0.0.1000.exe and follow the prompts to install the program.
At the end, be sure a checkmark is placed next to the following:

Launch Malwarebytes Anti-MalwareA 14 day trial of the Premium features is pre-selected. You may deselect this if you wish, and it will not diminish the scanning and removal capabilities of the program.
Click Finish.On the Dashboard, click the 'Update Now >>' linkAfter the update completes, click the 'Scan Now >>' button.
Or, on the Dashboard, click the Scan Now >> button.If an update is available, click the Update Now button.
A Threat Scan will begin.When the scan is complete, if there have been detections, click Apply Actions to allow MBAM to clean what was detected.In most cases, a restart will be required.Wait for the prompt to restart the computer to appear, then click on Yes.If you already have MBAM 2.0 installed:On the Dashboard, click the 'Update Now >>' linkAfter the update completes, click the 'Scan Now >>' button.
Or, on the Dashboard, click the Scan Now >> button.If an update is available, click the Update Now button.
A Threat Scan will begin.When the scan is complete, if there have been detections, click Apply Actions to allow MBAM to clean what was detected.In most cases, a restart will be required.Wait for the prompt to restart the computer to appear, then click on Yes.How to get logs:(Export log to save as txt)After the restart once you are back at your desktop, open MBAM once more.Click on the History tab > Application Logs.Double click on the Scan Log which shows the Date and time of the scan just performed.Click 'Export'.Click 'Text file (*.txt)'In the Save File dialog box which appears, click on Desktop.In the File name: box type a name for your scan log.A message box named 'File Saved' should appear stating "Your file has been successfully exported".Click OkAttach that saved log to your next reply.(Copy to clipboard for pasting into forum replies or tickets)After the restart once you are back at your desktop, open MBAM once more.Click on the History tab > Application Logs.Double click on the scan log which shows the Date and time of the scan just performed.Click 'Copy to Clipboard'Paste the contents of the clipboard into your reply.Download Malwarebytes Anti-Rootkit to your desktop.Warning! Malwarebytes Anti-Rootkit needs to be run from an account with administrator rights.Double click on downloaded file. OK self extracting prompt.MBAR will start. Click "Next" to continue.Click in the following screen "Update" to obtain the latest malware definitions.Once th... Read more

http://www.bleepingcomputer.com/forums/t/546668/win7-64bit-pc-reboots-daily-with-dcom-error/
Relevancy 58.91%

Hi,

I just installed Win 7 64 Professional retail on a new OCZ SSD. I have been having issues with the system rebooting & I was convinced it was the old SSD. Since i have come back to my PC twice within 12 hours to find it had "recovered from a serious error", I am wondering if its something else (ram)?

Any ideas what it could be?

Is Windows 7 . . .
- x86 (32-bit) or x64 ? 64 bit
- the original installed OS on the system? Windows 7 Pro 64
- an OEM or full retail version? Retail
- What is the age of system (hardware)? Brand new build
- What is the age of OS installation (have you re-installed the OS?) 24 hours

I7 960 processor
12 gigs ram (I bought a 6gig pack twice by mistake)
Asus P6X58D Premium mobo
OCZ Agility2 60 gig drive
ATI HD5XXX video card.

Thanks,
Rich

A:BSOD - Constant reboots on new system

First, please visit the Asus support website and download/install the latest version of the ATK0110 ACPI Utility driver - it'll either be under the ATK or the Utility sections on the downloads page. The version on your system now (from 2005) is a known BSOD cause in Windows 7. Then see if you continue to get BSOD's.

One of the errors is a STOP 0x109 - and it's commonly associated with memory problems (RAM, CPU, mobo, video memory). As such I'd start with these free diagnostics:





Quote:
H/W Diagnostics:
Please start by running these bootable hardware diagnostics:
Memory Diagnostics (read the details at the link)
HD Diagnostic (read the details at the link)

Also, please run one of these free, independent online malware scans to ensure that your current protection hasn't been compromised: Malware (read the details at the link)

Then, if the above tests pass, I'd try these free stress tests:





Quote:
FurMark download site: FurMark: Graphics Card Stability and Stress Test, OpenGL Benchmark and GPU Temperature | oZone3D.Net
FurMark Setup:
- If you have more than one GPU, select Multi-GPU during setup
- In the Run mode box, select "Stability Test" and "Log GPU Temperature"
Click "Go" to start the test
- Run the test until the GPU temperature maxes out - or until you start having problems (whichever comes first).
- Click "Quit" to exit







Quote:
Prime95 download site: Free Software - GIMPS
Prime95 Setup:
- extract the contents of the zip file to a location of your choice
- double click on the executable file
- select "Just stress testing"
- select the "Blend" test. If you've already run MemTest overnight you may want to run the "Small FFTs" test instead. (run all 3 if you find a problem and note how long it takes to error out with each)
- "Number of torture test threads to run" should equal the number of CPU's times 2 (if you're using hyperthreading).
The easiest way to figure this out is to go to Task Manager...Performance tab - and see the number of boxes under CPU Usage History
Then run the test for 6 to 24 hours - or until you get errors (whichever comes first).
This won't necessarily crash the system - but check the output in the test window for errors.
The Test selection box and the stress.txt file describes what components that the program stresses.





The second error is a STOP 0x3B - and is commonly associated with driver issues - so I'd suggest running Driver Verifier according to these instructions:





Quote:
Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

So, I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
NOTE: You can use Low Resource Simulation if you'd like. From my limited experimentation it makes the BSOD's come faster.
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot t... Read more

http://www.sevenforums.com/bsod-help-support/97703-bsod-constant-reboots-new-system.html
Relevancy 58.48%

I?m running an AMD Phenom II X6 1035T on a Crosshair V motherboard with 2 SSDs, 1 HDD and a few external drives.

Ever since getting the new system together (before I used a different motherboard, PSU and only HDDs) I get daily crashes.

I?ve attached a dump report, a whole bunch of pictures of system specs, and virtually everything I know. There?s also a document that looks at SSD and HDD status ? I?m suspecting it?s my OCZ SSDs that may be acting up?

The crash address is ?ntoskrnl+80640?.

I also get this curious warning from my Crosshair V motherboard software (even though I did not edit the default settings of the motherboard). Please see attached.

Any help would be appreciated.
 

A:Continuous, daily crashing -- โ€˜ntoskrnl+80640โ€™

Yes, running 2 SSD's on an Asus motherboard... you're a brave soul :rolleyes:

Swap the positions of the 2 SSD's, one as the boot drive. Both SSD's can't be bad at the same time
 

http://www.techspot.com/community/topics/continuous-daily-crashing-%E2%80%98ntoskrnl-80640%E2%80%99.179849/
Relevancy 58.48%

System Windows ultimate x retail most components are brand new months old HDDs are a few years old except primary which is SSD from last year One of my HDDs is old but not used for system stuff at all and is being replaced soon I work from home as a remote repair dude so needing help is a little embarrassing I generally use whocrashed for BSODs but I cannot isolate the cause here Reinstalled windows a month ago still crashing like crazy Video drivers up to date as of last week Attached is dumps and perfmon data Perfmon says a disk has the dirty bit set but that's an image of different Multiple NTOSkrnl.exe BSODs, usually errors but daily, my pre-reinstall of the OS so I could get data from it readily incase anything decided to be real dumb on the Multiple BSODs, daily, usually NTOSkrnl.exe but different errors reinstall I just copied the whole system drive partition to my USB HDD apparently that copied the dirty bit too WinDBG doesn't seem to provide a lot of data whocrashed doesn't summarize but I'm still a little dumb on dump analysis Attached is the last week's worth of BSODs as I recently cleared the folder because it had a lot of dumps in it which I realize now is dumb heh I'm working through the BSOD analysis guide but I would really like some fast help on this if at all possible before I go crazy or get canned for BSODing while in call Let me know if I failed to provide anything

A:Multiple BSODs, daily, usually NTOSkrnl.exe but different errors

Hello,

No shame in asking for an assist, none of us are experts in everything! Stick around and you'll see we all ask questions and answer questions.

I'd think this is a hardware problem, quite frankly. Given the frequency dwm.exe and dxgkrnl.sys are mentioned, if I could only make one guess, it would be that your video card is somehow related. Possibly faulty, more likely underpowered. I'll leave it at that, as I'm assuming you can handle things from there as a technician. I'm perfectly willing to go into more detail on request, however.

My #2 guess would be the RAM. While video-related problems could certainly cause those errors, system memory has been known to do the same. I'd recommend you run the Blend Prime95 test, and perhaps run Memtest86 when you can.

Hardware - Stress Test With Prime95

RAM - Test with Memtest86+

...Summary of the dumps:

Code:

Built by: 7601.17727.amd64fre.win7sp1_gdr.111118-2330
Debug session time: Wed Mar 28 13:43:02.971 2012 (UTC - 4:00)
System Uptime: 0 days 0:28:38.157
*** ERROR: Symbol file could not be found. Defaulted to export symbols for win32k.sys -
Probably caused by : dxgkrnl.sys ( dxgkrnl!HMGRTABLE::AllocHandle+131 )
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
BUGCHECK_STR: 0x50
PROCESS_NAME: VDeck.exe
FAILURE_BUCKET_ID: X64_0x50_dxgkrnl!HMGRTABLE::AllocHandle+131
BiosReleaseDate = 08/18/2011
SystemProductName = System Product Name
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.17727.amd64fre.win7sp1_gdr.111118-2330
Debug session time: Wed Mar 28 13:13:30.873 2012 (UTC - 4:00)
System Uptime: 0 days 20:08:41.449
*** ERROR: Symbol file could not be found. Defaulted to export symbols for win32k.sys -
Probably caused by : Pool_Corruption ( nt!ExDeferredFreePool+118b )
BUGCHECK_STR: 0x19_3
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
PROCESS_NAME: dwm.exe
FAILURE_BUCKET_ID: X64_0x19_3_nt!ExDeferredFreePool+118b
BiosReleaseDate = 08/18/2011
SystemProductName = System Product Name
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.17727.amd64fre.win7sp1_gdr.111118-2330
Debug session time: Tue Mar 27 17:04:07.374 2012 (UTC - 4:00)
System Uptime: 1 days 15:23:01.560
Probably caused by : memory_corruption ( nt!MiDereferencePerSessionProtos+2e )
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
BUGCHECK_STR: 0x3B
PROCESS_NAME: dwm.exe
FAILURE_BUCKET_ID: X64_0x3B_nt!MiDereferencePerSessionProtos+2e
BiosReleaseDate = 08/18/2011
SystemProductName = System Product Name
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.17727.amd64fre.win7sp1_gdr.111118-2330
Debug session time: Mon Mar 26 01:39:51.439 2012 (UTC - 4:00)
System Uptime: 9 days 18:10:19.632
Probably caused by : dxgmms1.sys ( dxgmms1!VIDMM_PROCESS_HEAP::MapViewOfAllocation+15d )
PROCESS_NAME: dwm.exe
BUGCHECK_STR: 0x7E
DEFAULT_BUCKET_ID: NULL_CLASS_PTR_DEREFERENCE
FAILURE_BUCKET_ID: X64_0x7E_dxgmms1!VIDMM_PROCESS_HEAP::MapViewOfAllocation+15d
BiosReleaseDate = 08/18/2011
SystemProductName = System Product Name
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.17727.amd64fre.win7sp1_gdr.111118-2330
Debug session time: Fri Mar 16 07:23:31.073 2012 (UTC - 4:00)
System Uptime: 0 days 19:53:27.275
*** ERROR: Symbol file could not be found. Defaulted to export symbols for win32k.sys -
Probably caused by : memory_corruption ( nt!MiBadShareCount+4c )
BUGCHECK_STR: 0x4E_99
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
PROCESS_NAME: dwm.exe
FAILURE_BUCKET_ID: X64_0x4E_99_nt!MiBadShareCount+4c
BiosReleaseDate = 08/18/2011
SystemProductName = System Product Name
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.17727.amd64fre.win7sp1_gdr.111118-2330
Debug session time: Thu Mar 15 11:29:22.501 2012 (UTC - 4:00)
System Uptime: 0 days 17:57:59.703
Probably caused by : memory_corruption (... Read more

http://www.sevenforums.com/bsod-help-support/221577-multiple-bsods-daily-usually-ntoskrnl-exe-but-different-errors.html
Relevancy 58.48%

I have an HP dv2715nr, stock computer except for a 2gb memory upgrade a year ago. I recently loaded Windows 7 and it is crashing daily (when I leave it alone for a while). Screen goes blank, touchpad and wireless are disabled. Have to restart after each crash.
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.4
Locale ID: 1033
Additional information about the problem:
BCCode: 124
BCP1: 00000000
BCP2: 861D0024
BCP3: 00000000
BCP4: 00000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1
 

https://forums.techguy.org/threads/windows-7-crashing-daily-bbcode-124-ntoskrnl-exe.899213/
Relevancy 58.48%

I?m running an AMD Phenom II X6 1035T on a Crosshair V motherboard with 2 SSDs, 1 HDD and a few external drives.

Ever since getting the new system together (before I used a different motherboard, PSU and only HDDs) I get daily crashes.

I?ve attached a dump report, a whole bunch of pictures of system specs, and virtually everything I know. There?s also a document that looks at SSD and HDD status ? I?m suspecting it?s my OCZ SSDs that may be acting up?

The crash address is ?ntoskrnl+80640?.

I also get this curious warning from my Crosshair V motherboard software (even though I did not edit the default settings of the motherboard). Please see attached.

Any help would be appreciated.

A:Continuous, daily crashing -- ‘ntoskrnl+80640’

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

If you are overclocking STOP
We could also use some system information, which you can get easily by running msinfo32.
To do that go to start>run>type msinfo32>enter

When it is finished running go to file>save>name it and upload to us here.
You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.



To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

http://www.sevenforums.com/bsod-help-support/224159-continuous-daily-crashing-ntoskrnl-80640-a.html
Relevancy 58.48%

Hi All I have a BSOD at least once a day Occasionally I can go a few days without one if I remember to shut down my computer at night If I forget I almost always wake up all BSODs - ntoskrnl.exe Daily F4 error - stop to a crashed computer It will Daily BSODs - all F4 stop error - ntoskrnl.exe also crash on my once in awhile while playing a game I am almost always playing a game while at the computer thoough The screen gets distorted with random colors then crashes Here is my speccy http speccy piriform com results zIdiCau vvaqrw XpOf dX here is my bluescreenview export https dl dropboxusercontent Daily BSODs - all F4 stop error - ntoskrnl.exe com u Crash List htm here is a past thread where I had constant random crashes and the community here helped me resolve many of them by helping me install certain hotfixes and driver updates http www bleepingcomputer com forums t new-pc-loving-it-except-that-it-randomly-hangs-on-sleep-or-gives-me-a-bsod I post that simply for reference so that one may see what I've already done I want to see if I can go without buying a new HDD I will even resort to a whole new fresh install but hopefully it won't come to that PLease help Sincerely DailyBSOD cmcarlin

A:Daily BSODs - all F4 stop error - ntoskrnl.exe

Please download and run who crashed:
 
We need to analyze your operating system's crash dump files to further diagnose what could possibly be crashing your computer system.Please download Who Crashed? and save it to your desktop.
Double click whocrashedSetup.exe and choose Run
On Windows Vista, 7, 8 and 8.1 machines, when User Account Control asks if you wish to install this program, say YES to install the program on your computer.
Program can also be installed by right click and choosing Run As An Administrator.
On the next screen choose Next and accept the agreement.
Install the program in it's default location C:\Program Files\WhoCrashed (If your primary drive is different from C:, choose your primary drive.)
Choose Next and allow program to create a Start Menu Folder called WhoCrashed and click Next.
Allow program to create desktop icon and click Next.
Now Click Install.
Once the program is installed on your computer system, look for the WhoCrashed desktop Icon and double click it.
Accept the User Account Control request and the program will open on your screen and should look something like this.
Next, Click the Analyze button.
An Information Window should appear on your screen prompting you to scroll down your screen.
If a report was generated we would like to have a look at this report.
To do this, click File and then choose Export.
Save as WhoCrashedOutput.htm to your desktop.
Open WhoCrashedOutput.htm and copy and paste all of the contents from System Information (local) and Crash Dump Analysis and the Conclusion into your next reply.
 

http://www.bleepingcomputer.com/forums/t/526801/daily-bsods-all-f4-stop-error-ntoskrnlexe/
Relevancy 58.48%

Normally I can get to the bottom of most BSOD, this one is beating me somewhat though. Its on my older Q6600 build, which is used mostly as media center/for my gf to play the sims 3. It had a ssd in it which decided to die completely, which got replaced under warrenty. Finally get new ssd, reinstall everything, but now I get random BSOD, aprox 2 - 3 times a day.

Tried - Killed my oc (its was only to 2.7ghz and has a massive aftermarket cooler)
- Reseat componets
- Lots of driver reinstalls
- Memtest
- Reflashed the BIOS

Suspecting that it might be a dodge sata cable or failing chipset, but I can't read more than basic BSOD codes (tried to get mini dump data but I dont have the tools or knowledge)

Any help would be greatly appreciated

Regards,

Junkman690

A:ntoskrnl BSOD - Old system with new ssd

Running out of ideas to try here, later today I'll try take it all apart again, reseat everything and swap some cables.

http://www.sevenforums.com/bsod-help-support/249688-ntoskrnl-bsod-old-system-new-ssd.html
Relevancy 58.48%

Well my system specs are in my profile but I'll put them here for simplicity sake as well.
Asus P5N-T Deluxe
Q6600 @ 3.0 Vcore 1.20v
2 x 2GB Corsair Dominator RAM @ 1066
2 x 8800GT stock
Razer Barracuda AC-1
750watt Corsair PSU
3 HDDs and DVD drive

Okay before you go and say its my overclocked CPU its been oced for months now and the problem has only recently just started. It usually happens when I'm playing a game of some sort but at random times, I played CSS for a good 3 hours then it reboot, other time less than an hour. It has happened most recently when I booted up FEAR 2 and I was was tweaking the games settings, after I had it setup just right and clicked New Game, system reboots. Any thoughts?
 

A:System Reboots but no BSOD or Error message

Is the video card overheating? Open the case and make sure that all the fans (including video fan) are clean and working properly. I'll try overclocking my Q6600 when I install my new motherboard next week
 

http://www.techspot.com/community/topics/system-reboots-but-no-bsod-or-error-message.123113/
Relevancy 58.05%

Hello I'm not very tech savvy Bluescreenview BSODs ntoskrnl.exe blames daily, Random almost so please bare with me Random BSODs almost daily, Bluescreenview blames ntoskrnl.exe while I try to explain my issue For about - weeks now I've been experience random BSODs After trying several things I decided to reset to factory last week All was well until a few days later it continued with another BSOD Ever since then I've been getting them at random Sometimes it'll happen minutes after I boot my computer other times it could take a day or so I download Bluescreenview in hopes that I could find what was causing this issue and get it resolved Bluescreenview stats that the bug check string is KMODE EXCEPTION Random BSODs almost daily, Bluescreenview blames ntoskrnl.exe NOT HANDLED caused by driver ntoskrnl exe There are other crashes where the driver was hal dll and win k sys I'm not sure how to post my MiniDump files I've tried Random BSODs almost daily, Bluescreenview blames ntoskrnl.exe accessing them even with the Windows Debugging tool but it says I don't have permission to open the file Information about my system Windows Home Premium bit Acer Aspire X GB ram GB usable Processor AMD Athlon tm II X Processor GHz Service Pack is installed Any help suggestions or assistance would be greatly appreciated

A:Random BSODs almost daily, Bluescreenview blames ntoskrnl.exe

http://www.sevenforums.com/crashes-d...tructions.html

Seems like hardware errors
Run a RAM test
RAM - Test with Memtest86+

Run Prime 95 to test your CPU. Carefully the instructions in this tutorial: CPU - Stress Test with Prime95. Run 3 separate tests, one on each of the settings (Blend, Small FFTs, Large FFTs). Post back with your results.
Note that this test may overheat the CPU, ensure proper cooling

http://www.sevenforums.com/bsod-help-support/212959-random-bsods-almost-daily-bluescreenview-blames-ntoskrnl-exe.html
Relevancy 58.05%

A couple of months ago I started getting sporadic system crashes for reasons I didn't understand so I simply reinstalled Windows and that solved my problem for a bit A couple of weeks ago I started having the same problem but I noticed the x E stop code I didn't know better at the time so I just did another quick reinstall and that was fine till a couple of days ago when lo and behold I started getting system crashes again This time there were x E stop codes and xD stop codes with a line identifying sortport - ntoskrnl.exe? (BSOD) crash System sys as the reason for the crash I'd realized that in Normal Mode Windows would crash when I opened Google Chrome or when Gmail Notifier initialized with Chrome as the default browser so after uninstalling those I no longer got the sortport sys system crash The x E system crashes did continue but I do get xD codes still but WhoCrashed is telling me that ntoskrnl exe is System crash (BSOD) - ntoskrnl.exe? the reason for those crashes I doubt it's a hardware problem because reinstalling Windows shouldn't affect the health of my hardware Unless an update released months ago is conflicting with one of my drivers or a piece of my hardware and it just so happens to be installing itself Via Windows Update a short time after Windows has been installed Several other things to take into consideration My HDD is split into partitions the first is for system files and the other is for user files I always log in to my Standard user account and I have to put in a password for any program that tries to alter system files eliminating the need for a running antivirus In Safe Mode the computer doesn't crash at all which further convinces me that it's a software problem because if it was a hardware issue the system would crash all the time In Safe Mode if I started Google Chrome it would crash due to a driver error From my experience it was either storport sys or nvstor sys In Safe Mode if I log in to my Administrator profile the system crashes with either a x E or xD sop code ----- Computer Specs OS Windows Home Premium x CPU Intel Pentium Dual Core E HDD Seagate Barracuda Green GB HDD RAM GB DDR PC - - MHz x GB Kingston x MB Samsung GPU MSI GTX GB GDDR Cyclone Sound Creative Sound Blaster Audigy Motherboard XFX i Motherboard

A:System crash (BSOD) - ntoskrnl.exe?

ntoskrnl.exe failures can point to a list of problems most of them related to corruption of one form or another. I was not aware this problem could even occur with win 7, I have seen it in win xp several times though. a secure file check or disc scan will usually point you to the culprit.

..anyhow I'm blabbering, the first thing I would do in your situation would be to run a registry scan with your preferred registry utility. Next step would be a secure file check, then a disc check.
Finally I would check the ram. Usually bad ram will lead to a variety of error messages though not a consistent one.

http://www.sevenforums.com/bsod-help-support/139745-system-crash-bsod-ntoskrnl-exe.html
Relevancy 58.05%

I've installed windows just a few days ago and since day one they've been crashing a lot Since it's newly bought computer new on system, ntoskrnl.exe INTERNAL_POWER_ERROR BSOD I somewhat doubt it could be hardware BSOD on new system, INTERNAL_POWER_ERROR ntoskrnl.exe but you'll hopefully reassure me Here is what WhoCrashed says On Fri GMT your computer crashed crash dump file C Windows Minidump - - dmp This was probably caused by the following module ntoskrnl exe BSOD on new system, INTERNAL_POWER_ERROR ntoskrnl.exe nt x DCA Bugcheck code xA x A xA xFFFFE C D xFFFFFFFFC Error INTERNAL POWER ERROR file path C Windows system ntoskrnl exe product Microsoft Windows Operating BSOD on new system, INTERNAL_POWER_ERROR ntoskrnl.exe System company Microsoft Corporation description NT Kernel amp System Bug check description This bug check indicates that the power policy manager experienced a fatal error This problem might be caused by a thermal issue The crash took place in the Windows kernel Possibly this problem is caused by another driver that cannot be identified at this time I've uploaded the attachment as instructed for further info Thanks in advance

A:BSOD on new system, INTERNAL_POWER_ERROR ntoskrnl.exe

I think I've found the cause of the error, my memory controller has been set to IDE while having ssd disc on sata port. That caused some kind of instability, I guess. Hope this helps someone

http://www.eightforums.com/bsod-crashes-debugging/63353-bsod-new-system-internal_power_error-ntoskrnl-exe.html
Relevancy 57.62%

About days ago MSE started finding multiple trojan infections on a daily reboots and require multiple infections Daily scans full trojan MSE basis This required Daily trojan infections require multiple MSE full scans and reboots me to run full scans at least every day I have tried everything I can think of and can't stop the ongoing infections List of trojans as follows Trojan Win Yakad A plock Trojan Win Gheugent A plock Backdoor Win Simda AT VirTool Win CeeInject gen KK Trojan Win Simda S VirTool Win VBInject gen LE Trojan Win Miuref Daily trojan infections require multiple MSE full scans and reboots F Trojan Win Anaki A plock Trojan Win Miuref C Daily trojan infections require multiple MSE full scans and reboots PWS Win Zbot gen plock Backdoor Win Simda I found that many of these infections corresponded to files located in the C ProgramData Microsoft Secure Icons Temp folder and were still there after MSE had Cleaned and Removed the infections I started deleting these files but that has had no effect on the number of new infections I am at wits end and would really appreciate some guidance Scan result of Farbar Recovery Scan Tool FRST txt x Version - - Ran by Win administrator on WIN-PC on - - Running from C Users Win Desktop Loaded Profiles Win Available profiles Win Platform Windows Ultimate Service Pack X OS Language English United States Internet Explorer Version Default browser FF Boot Mode Normal Tutorial for Farbar Recovery Scan Tool http www geekstogo com forum topic -frst-tutorial-how-to-use-farbar-recovery-scan-tool Processes Whitelisted If an entry is included in the fixlist the process will be closed The file will not be moved Microsoft Corporation C Program Files Microsoft Security Client MsMpEng exe Creative Technology Ltd C Program Files x Creative Shared Files CTAudSvc exe Schneider Electric C Program Files x APC PowerChute Personal Edition mainserv exe Intel reg Corporation C Program Files Intel iCLS Client HeciServer exe Schneider Electric C Program Files x APC PowerChute Personal Edition dataserv exe Safer Networking Ltd C Program Files x Spybot - Search amp Destroy SDWinSec exe Microsoft Corporation C Windows System alg exe Microsoft Corporation C Program Files Microsoft Security Client NisSrv exe AddGadgets C Users WIN AppData Local Temp Rar EX PCMeter PCMeterV exe Realtek Semiconductor C Program Files Realtek Audio HDA RAVCpl exe Microsoft Corporation C Windows System rundll exe Microsoft Corporation C Program Files Microsoft IntelliPoint ipoint exe Intel Corporation C Windows System igfxtray exe Intel Corporation C Windows System hkcmd exe Intel Corporation C Windows System igfxpers exe Microsoft Corporation C Program Files Microsoft Security Client msseces exe Realtek Semiconductor C Program Files Realtek Audio HDA RAVBg exe Microsoft Corporation C Program Files Windows Sidebar sidebar exe Wondershare C Program Files x Common Files Wondershare Wondershare Helper Compact WSHelper exe Siber Systems C Program Files x Siber Systems AI RoboForm robotaskbaricon exe Microsoft Corporation C Windows System regsvr exe Microsoft Corporation C Windows SysWOW regsvr exe FNet Co Ltd C Program Files x XFastUsb XFastUsb exe Creative Technology Ltd C Program Files x InstallShield Installation Information F D AC - F - BB -B AB- C AMBSPISyncService exe Macrovision Europe Ltd C Users WIN AppData Local Temp Sound Blaster X-Fi MB Cleanup Creative Technology Ltd C Program Files x Creative SB X-Fi MB Volume Panel VolPanlu exe Creative Labs C Program Files x Common Files Creative Labs Shared Service XMBLicensing exe Elaborate Bytes AG C Program Files x Elaborate Bytes VirtualCloneDrive VCDDaemon exe Schneider Electric C Program Files x APC PowerChute Personal Edition apcsystray exe Samsung Electronics C Program Files x Samsung Samsung Magician Samsung Magician exe Microsoft Corporation C Windows SysWOW regsvr exe Intel Corporation C Program Files x Intel Intel reg Management Engine Components LMS LMS exe Intel Corporation C ... Read more

A:Daily trojan infections require multiple MSE full scans and reboots

Hi & to Bleeping Computer Forums!
My name is Jürgen and I will be assisting you with your Malware related problems.
Before we move on, please read the following points carefully:
My native language isn't English. So please do not use slang or idioms. It could be hard for me to read. Thanks for your understanding.
Please read my instructions completely. If there is anything that you do not understand kindly ask before proceeding.
Perform everything in the correct order. Sometimes one step requires the previous one.
If you have any problems while you are follow my instructions, Stop there and tell me the exact nature of your problem.
Do not run any other scans without instruction or Add/ Remove Software unless I tell you to do so. This would change the output of our tools and could be confusing for me.
Post all Logfiles as a reply rather than as an attachment unless I specifically ask you. If you can not post all logfiles in one reply, feel free to use more posts.
If I don't hear from you within 5 days from this initial or any subsequent post, then this thread will be closed.
If I don't reply within 24 hours please PM me!
Stay with me. I will give you some advice about prevention after the cleanup process. Absence of symptoms does not always mean the computer is clean.
Malware WarningIf your computer was used for online banking, has credit card information or other sensitive data, using a non-infected computer/device you should immediately change all account information (including those used for banking, Email, eBay, Paypal, online forums, etc).Step 1
Please download Combofix (by sUBs) and save it to your Desktop.
Disable the realtime-protection of your antivirus and anti-malware programs because they might interfere with the scan.
Start Combofix.exe and follow its instructions.
Do not use the computer while the scan is running. This may cause the program to stall.
When finished, a log file will be displayed (that can also be found at C:\Combofix.txt).
Please copy and paste the contents of this file into your next post.
Note: If you receive an error "Illegal operation attempted on a registry key that has been marked for deletion." after the scan, just restart the computer.
(You can find more detailed instructions in this guide on using Combofix.)

http://www.bleepingcomputer.com/forums/t/567810/daily-trojan-infections-require-multiple-mse-full-scans-and-reboots/
Relevancy 57.19%

I've been through many of the threads here in hopes of finding a solution to the BSOD's I've had the past couple of weeks My close friend built me my gaming rig and 7 System CRITICAL_OBJECT_TERMINATION Win NT & Kernel BSOD ntoskrnl.exe shortly thereafter starting the windows updates I would receive a BSOD was literally built - weeks ago I thought it was because the updates hadn't finished So we updated everything and for a day or two everything would be fine A week later my computer would either freeze up or BSOD when playing games such as League of Legends Skyrim Guild Wars browsing or even sitting idly All my drivers Win 7 NT Kernel & System ntoskrnl.exe BSOD CRITICAL_OBJECT_TERMINATION are updated and I just finished reinstalling the OS today in hopes that maybe that was the cause I even tried following the one thread here in using the driver verifier Driver Verifier - Enable and Disable Sadly when I restarted my computer would freeze up on the desktop mouse wouldn't move could not ctrl alt delete etc I restarted times waited half an hour while the screen was frozen on main desktop and gave up removing the presets of the verifier in safe mode Now after my monologue please see the attached zip I hope someone knows what is wrong because I'm ready to throw this contraption out the window no I won't - I love my gaming too much To the best of my knowledge these are some of the driver specs Windows Home Premium AMD FX tm - Eight Core Proccessor ASUS M A FX Pro R Motherboard AMD Radeon HD Series AMD Sata Controller Realtek PCIe GBE Family Controller Adapter and Wireless LAN Please let me know if you need anything else

A:Win 7 NT Kernel & System ntoskrnl.exe BSOD CRITICAL_OBJECT_TERMINATION

Welcome aboard.

This is a stop 0x05.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck F4, {3, fffffa8009190b30, fffffa8009190e10, fffff8000379d460}

Probably caused by : wininit.exe

Followup: MachineOwner
---------
This is usually a storage related stop code. So you have to do something there.
Update your SSD's firmware.
Update the Asmedia 106x SATA Host Controller Driver, from ASMedia Technology Inc. ????
Go to your SSD manufacturer's site, and take their test, to make it sure that there is no corruption.
Let us know the result.

http://www.sevenforums.com/bsod-help-support/259829-win-7-nt-kernel-system-ntoskrnl-exe-bsod-critical_object_termination.html
Relevancy 57.19%

So I had an HTPC setup, it runs MCEBUDDY to remove the commercials and then sync to my tablet in the middle of the night. The old system would randomly power itself off and give this error code when i turned it back on. Well I thought maybe the memory was failing so i replaced that, it still did it so I finally broker down and got this brand new system and ironically I am getting the exact same symptoms. This has to be due to a piece of software but I cannot figure out which one. Can someone please take a look at the dump files and let me know what else to try. Thank you so much in advance.

A:BSOD Brand New System ntoskrnl.exe+72a40

Your dumps are blaming ftdibus.sys which seems to be a usb to serial adapter Driver Reference Table - ftdibus.sys

Try finding an alternate driver or if you are not using it disable it.


Code:

*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 9F, {3, fffffa8006a8dbd0, fffff80001ce83d8, fffffa80057be240}
*** WARNING: Unable to verify timestamp for ftdibus.sys
*** ERROR: Module load completed but symbols could not be loaded for ftdibus.sys
Probably caused by : ftdibus.sys
Followup: MachineOwner
---------

http://www.sevenforums.com/bsod-help-support/368639-bsod-brand-new-system-ntoskrnl-exe-72a40.html
Relevancy 56.76%

A potential power surge crippled my PSU, and so I replaced it. Later discovered that a fan was dead on my GPU and the hard drives were potentially dying. Replaced both of them. I've now reinstalled windows and will have BSODs whenever I am stressing the system. I've checked CrystalDisk, and all seems to be well there. Recently, I also lost the use of my Ethernet port. I'm wondering if more hardware needs to be replaced?

Attached are my crash dumps and PC build.

http://www.sevenforums.com/bsod-help-support/382517-bsod-while-stressing-system-wow-stress-test-ntoskrnl-exe.html
Relevancy 56.76%

Hello I have a desktop running Windows bit which I have had many problems with BSOD in the past I recently reformatted my computer to try to help with some of these issues and almost immediately after reformatting I got another BSOD Also my computer has BSOD reformat--System after Service Exception ntoskrnl.exe been running EXTREMELY slowly considering its high specs and the fact that there is very little installed on the computer yet The error was a System Service Exception blamed on ntoskrnl exe the same file causing most of my BSOD before the reformat as well I have attached the SF Diagnostic printout as requested as well In the past I had been running on sticks of GB each RAM About months ago after a string of BSOD I removed one of the sticks which I thought may be problematic but still have been getting BSOD on the stick which appeared OK on memtest I have tried running on each individual RAM stick in each of my BSOD after reformat--System Service Exception ntoskrnl.exe motherboard slots and it does not seem to make a difference in my BSOD so I am not convinced it is my RAM still I am really not sure what to try anymore I have posted on forums before about my problems but have never had any conclusive fix for my frequent BSOD at least once a BSOD after reformat--System Service Exception ntoskrnl.exe week sometimes much more I am not sure if there is a problem with my software or with the fact that I am running windows bit most of my friends use bit instead or my hardware most of the hardware tests in the past have not shown any problems Any help would be appreciated Thank you

A:BSOD after reformat--System Service Exception ntoskrnl.exe

Hi GiveMeTaffy

I noticed you don't have Service Pack 1 installed

Service Pack 1 Download below

Your version is


Code:
OS Version: 6.1.7600 N/A Build 7600
Might want to run a Test on your memory

RAM - Test with Memtest86+



   Note
Let it run over night If it fails Test every memory stick on every SLOT on the motherboard.

:Added:

Updated Drivers

Audio-Realtek Azalia

Driver/motherboard_driver_audio_realtek_azalia-ati.exe" target="_new">

AMD Chipset Driver

LAN(NIC) REALTEK

VIDEO:NVIDIA GeForce GTX 470

Storage : SATA Drivers

NEC USB 3.0 Driver

http://www.sevenforums.com/bsod-help-support/285197-bsod-after-reformat-system-service-exception-ntoskrnl-exe.html
Relevancy 56.76%

Hi all!

I've been fighting this random BSOD issue for a couple of months now, and am starting to get really frustrated with it.

I have included the various dumps as requested. I BELIEVE that it's related to the crappy Marvell RAID controller driver included on the mobo since I'm missing a disk in Windows (brand new.) But, I'm not experienced enough to debug this issue.

Could somebody take a look and help me troubleshoot this? Please let me know if you need anything else.

Thanks so much!

A:Random BSOD and System Shutdown, ntoskrnl.exe+75bc0

Welcome to the forum.

Please update these outdated drivers:

Perform a clean install of a driver following: How to Clean Left Over Driver Files with Driver Sweeper





Quote:
AppleCharger.sys Wed Nov 2 08:46:00 2011 (4EB0AEE8)
GIGABYTE On/Off Charge driver. See here for details - GIGABYTE ON/OFF Charge [br] May cause BSOD on Win7/8 systems - uninstall to test.
Driver Reference Table - AppleCharger.sys


akshhl.sys Fri Jul 20 15:30:59 2007 (46A080D3)
AksFridge driver (Aladdin security products)
Driver Reference Table - akshhl.sys

AKSCLASS.SYS Wed Nov 21 23:13:32 2007 (4744673C)
AksFridge driver (Aladdin security products)
Driver Reference Table - AKSCLASS.SYS

aksfridge.sys Thu Jan 8 13:59:54 2009 (4965B27A)
AksFridge driver (Aladdin security products)
Driver Reference Table - aksfridge.sys

aksusb.sys Wed Jan 28 21:02:53 2009 (4980739D)
AksFridge driver (Aladdin security products)
Driver Reference Table - aksusb.sys

hardlock.sys Mon Feb 2 21:34:08 2009 (49871270)
Hardlock Device Driver by Aladdin KnowledgeSystems
Driver Reference Table - hardlock.sys

akshasp.sys Mon Feb 2 21:47:42 2009 (4987159E)
AksFridge driver (Aladdin security products)
Driver Reference Table - akshasp.sys

mvxxmm.sys Thu Jan 19 12:50:44 2012 (4F17BD44)
Marvell Aux NV Bridge DLL - related to mv91xx SCSI HD Controller
Driver Reference Table - mvxxmm.sys

mvs91xx.sys Thu Jan 19 12:51:00 2012 (4F17BD54)
Marvell 91xx SATA Controller Driver
Driver Reference Table - mvs91xx.sys

If no updates are available, please remove the software with Revo Uninstaller Free.

Use Revo Uninstaller to uninstall stubborn software. Opt for Advance Mode while uninstalling which allows leftover registry removal:Download Revo Uninstaller Freeware - Free and Full Download - Uninstall software, remove programs, solve uninstall problems

Reduce items at start-up: Startup Programs - Change

Perform a clean boot: Troubleshoot Application Conflicts by Performing a Clean Startup

Trend Micro software tends to cause BSOD's. Please remove it for testing purpose. Use Microsoft Security Essentials.

Recommended from a strict BSOD perspective, compatibility & stability compared to other security software:

Microsoft Security Essentials - Free Antivirus for Windows

Malwarebytes - Free

Good and Free system security combination.

Do not start the free trial of Malware Bytes; remember to deselect that option when prompted.

Scan with Kaspersky TDSSKiller:Anti-rootkit utility TDSSKiller

ESET online scanner: Free Online Virus Scanner | ESET

Run Disk Check on your Hard Drive(s): Disk Check

Run a System file check (SFC): SFC /SCANNOW Command - System File Checker

Check for heating issues using Speccy or HWmonitor

Upload a screen shot: Screenshots and Files - Upload and Post in Seven Forums

Keep us posted. Good luck.

Bugcheck Summary:

Code:
Debug session time: Fri Dec 6 22:52:46.639 2013 (UTC + 6:00)
Built by: 7601.18247.amd64fre.win7sp1_gdr.130828-1532
System Uptime: 0 days 0:41:33.857
Probably caused by : pci.sys
BugCheck 9F, {3, fffffa800c933a10, fffff800048de3d8, fffffa8012222c60}
BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)
Bugcheck code 0000009F
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: fffffa800c933a10, Physical Device Object of the stack
Arg3: fffff800048de3d8, nt!TRIAGE_9F_POWER on Win7, otherwise the Functional Device Object of the stack
Arg4: fffffa8012222c60, The blocked IRP
BUGCHECK_STR: 0x9F
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0x9F_3_mvs91xx_IMAGE_pci.sys
??????????????????????????????????????????????????????????????????????????????????????``
Debug session time: Fri Dec 6 07:11:56.706 2013 (UTC + 6:00)
Built by: 7601.18247.amd64fre.win7sp1_gdr.130828-1532
System Uptime: 0 days 0:51:03.908
Probably caused by : pci... Read more

http://www.sevenforums.com/bsod-help-support/314222-random-bsod-system-shutdown-ntoskrnl-exe-75bc0.html
Relevancy 55.9%

Hey W People I have an older Asus that was a gaming PC in its hay day check specs and after the last windows updates I'm getting crazy random BSODs Usually always after it has been sitting a while like a day or so Then I start it up and it BSODs at Service Bad Exceptio System & BSOD Pool Multiple Reboots Header, IRQL, the login screen It'll get stuck at starting windows then hard reboot it It'll give me another one Multiple BSOD & Reboots IRQL, Bad Pool Header, System Service Exceptio once I login then it reboots and its fine lol I've had previous issues with it from day one Nvidia and Windows could not create a correct driver for the Geforce card so I removed it Multiple BSOD & Reboots IRQL, Bad Pool Header, System Service Exceptio and using the onboard graphics Then found out that they put a watt power supply in it Swapped that out with a watt and was doing fine for a while until now UPDATE Oh yeah Norton some how hijacked my ability to get an ip address so I had to remove it Now I'm about to get BullGuard AntiVirus software

A:Multiple BSOD & Reboots IRQL, Bad Pool Header, System Service Exceptio

Hello,

It is currently showing pool corruption on a couple of them, do this Driver Verifier - Enable and Disable

Also shows memory corruption on a couple of others. So run a memtest: RAM - Test with Memtest86+

Post back results.

-Gamer

http://www.sevenforums.com/bsod-help-support/329762-multiple-bsod-reboots-irql-bad-pool-header-system-service-exceptio.html
Relevancy 55.47%

I'm trying to crossfire my two 7850s but I keep getting system service exception BSODs.
I've used DDU to install new drivers. Prior to using DDU and installing new drivers, both cards worked fine by themselves.
I did try overclocking before this, but I set the values back to the normal ones, yet I still have problems.

I used the tool in Safe Mode if that matters at all.

EDIT:
Nevermind, I solved the issue by uninstalling all of my overclocking software. I think the main cause of them was MSI Afterburner. I also moved my page file to another hard drive.

A:BSOD ntoskrnl.exe and atikmdag.sys System Service Exception Code 0x3b

Originally Posted by GhostOfDawn


I solved the issue by uninstalling all of my overclocking software. I think the main cause of them was MSI Afterburner. I also moved my page file to another hard drive.



Good job!!

http://www.tenforums.com/bsod-crashes-debugging/43481-bsod-ntoskrnl-exe-atikmdag-sys-system-service-exception-code-0x3b.html
Relevancy 55.47%

I have attempted to install WX twice and have been forced to rollback to due to BSOD error nbsp Since the second rollback I receive these errors when loading specific running Errors, W8.1 high, file System post ntoskrnl BSOD WX programs opening S Sims Medieval Origin exe - Bad Image C WINDOWS system NV igdumdim dll is either not designed to run on windows or it contains an error Try installing the program again using the original installation media or contact your system administrator or the software vendor for support Error status xc f nbsp st then C WINDOWS system NV igd iumd dll is either not designed to run on Windows or it contains an error Try installing W8.1 Errors, System file ntoskrnl running high, post WX BSOD the program again using the original installation media or contact your system administrator or the software vendor for support Error status xc f twice opening System Mechanic regsvr exe - Bad Image C WINDOWS system NV igd iumd dll is either not designed to run on Windows or it contains an error Try installing the program again using the original installation media or contact your system administrator or the software vendor for support Error status xc f nbsp Appears times rounds of opening Sims Origin exe nbsp Bad Image C WINDOWS system NV igdumdim dll is either not designed to run on windows or it contains an error Try installing the program again using the original installation media or contact your system administrator or the software vendor for support Error status xc f then C WINDOWS system NV igd iumd dll is either not designed to run on Windows or it contains an error Try installing the program again using the original installation media or contact your system administrator or the software vendor for support Error status xc f twice They all have the same error status I'm not a techie but I notice it begins the same way and it appears to relate to the thing that has commonly run high before WX ever became available The ntoskrnl has been what has been making the nbsp memory disk run I can't remember which it could be both at different times and what is the cause of the BSOD preventing me from using my system after installing WX nbsp I'm thinking something about the system file is what's preventing successful installation of WX as the BSOD I can't remember specifically atm referenced it I looked it up and applied the fix which was a driver update and it still didn't remedy the problem nbsp The second time I downloaded I applied the fix beforehand and yet couldn't avoid the BSOD dxdiag I have run it let me know if you need it scannow results Windows Resource Protection found corrupt files but was unable to fix some of them Details are included in the CBS Log nbsp Again not being anywhere near familiar with the innerworkings and not having an income I have no idea where to begin to look for what's corrupt in this nor the ability to hire help This entry box won't allow the CBS log Respectfully J C is me

https://social.technet.microsoft.com/Forums/en-US/7a7688af-4958-4a55-9321-d5d843e5aaa3/w81-errors-system-file-ntoskrnl-running-high-post-wx-bsod?forum=w8itprogeneral
Relevancy 53.32%

Hi I built this custom htpc a few months ago and have experienced regular crashes reboots The system is based on an MSI Z -GD mobo with i - S processor in ntoskrnl.exe on Crash/reboots HTPC: symptoms custom ntkrnlmp.exe a fanless Streacom case designed for the purpose with extensive heatsinking To ensure temperatures are not excessive I have kept the processor within the Streacom recommendations nothing is overclocked and it uses only Intel's integrated graphics with no other video card All components are new The only quot unusual quot item has been an Asus Xonar STX sound PCI-e card The system is used for TV windows media center as a Plex server and a Foobar server - not much else By way of troubleshooting after the first few Crash/reboots on custom HTPC: ntoskrnl.exe ntkrnlmp.exe symptoms weeks I did a clean reinstall to remove any issues I might have caused as I iterated my way to the optimum setup but this made no difference I also replaced the PSU with no effect I have run memtest on the memory - this produced errors in the new quot hammer test quot but G-Skill apparently discount this test and when I run memtest which does not include such a test it shows no errors Temperatures are ok - typically - degrees C with occasional and up to only when doing extreme tasks like Memtest and the crashes do not seem to happen when anything intensive is going on I have been blaming the issue on the Asus Xonar STX sound card as google suggests some people find this causes BSOD issues and the Asus drivers are considered buggy and I had been using the alternative UNI drivers I have therefore recently now removed the card and installed the mobo's built in realtek sound However I have already had one reboot These reboots can be while watching TV using Windows Media Center or when updating a library in Plex or simply when putting Flash video to full screen in Chrome browser Rather than attempt another clean rebuild with no more likelihood that I will eliminate the problem this time than last time I would appreciate any help you folks can give me in tracking down the problem so I can fix it I have now switched minidump reporting one but the last reboot had already resulted in a MEMORY DMP file and one minidump file so I am attaching the requested zip file Thanks

A:Crash/reboots on custom HTPC: ntoskrnl.exe ntkrnlmp.exe symptoms

Some modules are unloaded there, which resisting the crash dump recording mechanism to record the complete data there.

Code:
fffff880`0330e098 fffff880`058a5b8e <Unloaded_spsys.sys>+0x3cb8e
fffff880`0330e0d8 fffff880`058a41f4 <Unloaded_spsys.sys>+0x3b1f4
fffff880`0330e0f0 fffff880`0586c720 <Unloaded_spsys.sys>+0x3720
fffff880`0330e0f8 fffff880`0587b510 <Unloaded_spsys.sys>+0x12510
fffff880`0330e100 fffff880`0587b510 <Unloaded_spsys.sys>+0x12510
fffff880`0330e108 fffff880`058a4270 <Unloaded_spsys.sys>+0x3b270
So crash dump analysis is also not being helpful.

Free up the startup. Windows does not need any other program to auto start with it, but the auto start programs often conflicts and causes various problems including BSODs.
Click on the Start button
Type ?msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the ?Startup? tab.
Deselect all items other than the antivirus.
Apply > OK
Accept then restart.
Then let us see the zip for the next BSOD, that may contain some information. To replicate a BSOD in your situation, put the computer in hibernate/sleep and wake it up.

http://www.sevenforums.com/bsod-help-support/372834-crash-reboots-custom-htpc-ntoskrnl-exe-ntkrnlmp-exe-symptoms.html
Relevancy 53.32%

Hey guys so I've been getting some random BSOD errors every few days or so I usually leave my computer on when I am at work or sleep and either when I come home Random BSOD error ntoskrnl.exe (address driver ntoskrnl.exe+74ec0) or wake up my computer is off So I turn it on and it says that the computer didn't Random BSOD error driver ntoskrnl.exe (address ntoskrnl.exe+74ec0) shut down properly when I start up I downloaded the BlueScreenView and noticed I've had some BSOD three times within days One Random BSOD error driver ntoskrnl.exe (address ntoskrnl.exe+74ec0) was a PAGE FAULT IN NONPAGED AREA error which I believe was a RAM problem i bought new RAM and installed it plus OCed it to but I believe it was making my system unstable so I reset the speed to default and haven't gotten that error again but after that I've gotten two IRQL NOT LESS OR EQUAL errors related to ntoskrnl exe I did some research online and from what I read it could be a number of problems I'm just not sure where to start and could really use some guidance and advice I uploaded my dmp files for anyone who knows how to look at these Thank in advance

A:Random BSOD error driver ntoskrnl.exe (address ntoskrnl.exe+74ec0)

Welcome to 7F. I'll take a look at your dumps and see if I can get you BSOD free.


One

 NETGEAR NEUTRAL WIRELESS SOLUTION

Your Netgear Neutral Wireless Solution driver has been flagged. It is quite old a could probably do with updating. Check for updates here
Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {0, 2, 1, fffff800034c88ac}

*** WARNING: Unable to verify timestamp for scmndisp.sys
*** ERROR: Module load completed but symbols could not be loaded for scmndisp.sys
Probably caused by : scmndisp.sys ( scmndisp+16d1 )

Followup: MachineOwner
---------

1: kd> lmvm scmndisp
start end module name
fffff880`0188b000 fffff880`01895000 scmndisp T (no symbols)
Loaded symbol image file: scmndisp.sys
Image path: \SystemRoot\system32\DRIVERS\scmndisp.sys
Image name: scmndisp.sys
Timestamp: Fri May 27 11:30:22 2011 (4DDF7D3E)
CheckSum: 00009C0C
ImageSize: 0000A000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4


Two

 HARDWARE DIAGNOSTICS

A few of your dumps (0x50, 0x124) are pointing towards hardware errors. 0x124s are usually always hardware errors but rarely give us an indication of what the problem actually is. In this case we may have struck lucky as this particular one shows up ASUS AI Suite III. The utilities listed below are the ones I'm concerned about.Attachment 353971


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa800752d028, Address of the WHEA_ERROR_RECORD structure.
Arg3: 00000000bf800000, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000000000124, Low order 32-bits of the MCi_STATUS value.

Debugging Details:
------------------
BUGCHECK_STR: 0x124_GenuineIntel

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

PROCESS_NAME: AISuite3.exe

CURRENT_IRQL: f

ANALYSIS_VERSION: 6.3.9600.17029 (debuggers(dbg).140219-1702) amd64fre
We have seen motherboard packaged utilities cause 0x124s in the past and it could be the case here.
Uninstall ASUS AI Suite III and test the system for stability.
Run SeaTools to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use
Download and run MemTest86+ to test your RAM. RAM - Test with Memtest86+


   Note
Attachment 353972 Run MemTest86+ for at least 8 passes. Ideally set it off before you go to bed and leave it overnight, we're looking for zero errors here. A single error will show something's going bad with your RAM.


Three

 NVIDIA GPU

You've also received a 0x116 which is a VIDEO_TDR_ERROR (Timeout Detection & Recovery) which means your GPU driver has crashed and has failed to recover in time. This could be down to the driver, the card itself or possibly the power to the card.
Code:
******************************************************************************... Read more

http://www.sevenforums.com/bsod-help-support/365399-random-bsod-error-driver-ntoskrnl-exe-address-ntoskrnl-exe-74ec0.html
Relevancy 52.89%

Hi to make things easier for you dxgmms1.sys,ntoskrnl.exe,Ntfs.sys BSOD Address:ntoskrnl.exe+75bc0; below is the Bug Check String Driver and crash address SYSTEM SERVICE EXCEPTION dxgmms sys ntoskrnl exe bc MEMORY MANAGEMENT ntoskrnl exe ntoskrnl exe bc SYSTEM SERVICE EXCEPTION ntoskrnl exe ntoskrnl exe bc NTFS FILE SYSTEM Ntfs sys ntoskrnl exe bc IRQL NOT LESS OR EQUAL ntoskrnl exe ntoskrnl exe bc unrelated how could I make nice table above I have searched the forum Problem BSOD randomly usually graphics related eg flash games in chrome graphics related software Mathematica Problem I use an internet usb G device to connect to internet Every morning the device will not connect to internet and computer will hang on shutting down screen when I BSOD Address:ntoskrnl.exe+75bc0; dxgmms1.sys,ntoskrnl.exe,Ntfs.sys restart I have to manually turn off and back on again I think this may be a dying capacitor on motherboard that needs boot's to get excited Problem Chrome quot aw snap quot happens regularly and is usually flash content related even ad banners seem to cause it from time to time I have reinstalled chrome checked plugins etc etc no luck Internet explorer runs stable but for example in flash games it seems to momentarily freeze and then catch up BSOD Address:ntoskrnl.exe+75bc0; dxgmms1.sys,ntoskrnl.exe,Ntfs.sys with itself again These are moments where I think chrome would have crashed Things I've done SFC scan All's well Memtest I did pass it took an hour everything fine Will put it on over night tonight Checked for latest drivers Also have latest BIOS Checked win update Ran Intel Burn everything ok max stress over Gb RAM run min max temp thank you Noctua NH-C P this is with quiet adaptor too lol Ran malwarebytes found nothing toxic Ran SSDlife Free health SSD seems fine Bought a new motherboard assuming that the current one is going bad I haven't switched over to it yet and thought I should investigate a little further before I do ie bad RAM CPU Power Supply SSD CPU seems fine RAM passed test but will test further My own quot opinion quot until today was that there is a fault on motherboard probably with usb hardware Now I realise that it could be the power supply but I have no way to test this bar buy a new one My analysis bad motherboard or bad PSU Either way not getting away with cheap fix methinks UPDATE I enabled verifier exe using this Driver Verifier - Enable and Disable Windows crashes just before going to desktop I had to boot last known config to get up and running again IE I CAN RELIABLY CREATE BSOD USING VERIFIER EXE WITH GIVEN INSTRUCTIONS So I am going to try focusing on drivers loaded at startup by process of elimination Is there a quick way to find out which one Below is the Check String Driver and crash address for the BSOD's when using verifier exe IRQL NOT LESS OR EQUAL ntoskrnl exe ntoskrnl exe bc DRIVER IRQL NOT LESS OR EQUAL RNDISMPX SYS RNDISMPX SYS a UPDATE If I choose or more non Microsoft drivers in verifier exe I get BSOD different check strings but always at the same address Also computer seems more unstable since engaging with verifier exe I feel I have given a thorough evaluation based on information in this forum and would appreciate feedback from those with more expertise than I UPDATE Another Memtest gave errors on pass Questions any chance poor power supply can cause this anyone have experience increasing voltage to make this go away would bad RAM explain all my problems ok fine i'll go through RAM and the slots and find the bad one sigh major sigh positively tragic sigh UPDATE Started with slot with stick of RAM Did memtest but had an idea I turned on verifier exe with all rd party drivers selected and my theory was to replicate the BSOD I got earlier at startup Went through each slot each RAM combo's of RAM and then to add insult to injury with all sticks in exactly same as before no BSOD Life is tough So maybe RAM wasn't properly seated all this time or maybe I need to test the RAM proper... Read more

A:BSOD Address:ntoskrnl.exe+75bc0; dxgmms1.sys,ntoskrnl.exe,Ntfs.sys

**************UPDATE 5 ****************




The sequence of events went as follows.
RAM test 1 pass was passed. Verifier.exe caused immediate BSOD on windows start when activated. Trying to hunt down drivers revealed any combo of 3 or more drivers gave BSOD at startup. Randomly decided to recheck RAM. Failed memtest after 27 minutes pass 1. Found one RAM stick that passed after one pass slot0. Got fed up of waiting for other slot's. Devised a plan to use verifier to check the RAM by seeing which combo's of RAM sticks gave BSOD on startup. All combo's passed. And now verifier does not give BSOD on any setting. Began to hate life. Cheered myself up with prospect of sleep. Put all 16 Gb RAM in properly and ran mentest for 18 hours, 6 passes. No error. Still no verifier.exe errors when enabled. Wrote this update.


If RAM failed after 27min one test, and then after swapping around a retest of 18 hours has no error, one would presume the RAM may be ok. Equally, I believe one could say the RAM is suspect. So, if the test is failed it really doesn't tell us anything except there is a problem somewhere. But we know there is a problem since we have BSOD!!! If I hadn't rerun the test I wouldn't question the RAM.

So the question is: how do I categorically ensure that a stick of RAM is good? Is memtest on RAM with an alternative working computer enough?



In summary:

I ran memtest for 18 hours, which was 6 passes. No problems detected. Using verifier.exe with protocols given on this forum I no longer get BSOD.

Currently my hypothesis is that the RAM was never seated correctly, or given that it takes a bit of force to insert correctly into motherboard, the flexing has at least temporarily defused whatever fault was causing my BSOD. Tenuous I know. But I really have no other explanation other than something somewhere on the motherboard or power is failing, or even the RAM.

http://www.sevenforums.com/bsod-help-support/351171-bsod-address-ntoskrnl-exe-75bc0-dxgmms1-sys-ntoskrnl-exe-ntfs-sys.html
Relevancy 52.89%

i keep getting BSOD when playing game new graphics i dont know where to start when its comes to BSOD stuff

110414-10576-01.dmp 11/4/2014 10:48:39 PM 0x00000124 00000000`00000000 fffffa80`0af318f8 00000000`00000000 00000000`00000000 ntoskrnl.exe ntoskrnl.exe+4a63cc NT Kernel & System Microsoft? Windows? Operating System Microsoft Corporation 6.1.7600.16385 (win7_rtm.090713-1255) x64 ntoskrnl.exe+4a63cc C:\Windows\Minidump\110414-10576-01.dmp 6 15 7600 262,144 11/4/2014 10:48:41 PM is some info i dont know what else yall need

A:0x00000124 ntoskrnl.exe ntoskrnl.exe+4a63cc BSOD Error runninganygame

Please Help

http://www.sevenforums.com/bsod-help-support/351242-0x00000124-ntoskrnl-exe-ntoskrnl-exe-4a63cc-bsod-error-runninganygame.html
Relevancy 52.89%

Jan , Crash Address All !! BSOD ntoskrnl.exe+80640 the Time ntoskrnl.exe ------------------------------------------- How to Solve - I've uninstalled my windows and recover my laptop with recovery DVD to it's original factory state original windows - Never installed Norton internet security again I'm using Microsoft Security Essentials now - Updated my Graphic Card Driver Intel Wifi Driver Sound Card Driver And some other drivers It's been two months now with no BSOD Thanks to dear Arc and gregrocker Thank you guys ------------------------------------------- Oct ------------------------------------------- Hi guys It's almost a year that I have problems with BSOD ntoskrnl.exe , All the Time !! Crash Address ntoskrnl.exe+80640 BSODs it use to be Atikmdag BSOD but I solve that with updating my Graphic card Driver and Changing Atikmdag sys file in Windows System folder But now it's about months that I get ntoskrnl exe BSODs in lot's of situations Web surfing Windows log on Working with Unity Working with files and Really lot's of Times Even in Safe Mode with Networking I guess it's because of my Network driver because I got BSOD in Safe Mode with Network but I never got a BSOD in normal Safe mode BTW I dunno how to solve it Please Help me these BSODs are sooooooooo annoying Here is my System Specs It's Msi GX CPU Intel R Core TM i CPU M GHz Main MICRO-STAR INTERNATIONAL CO LTD MS- Bios BIOS Date Ver Memory GB HDD ST AS ATA Device Sound Card AMD High Definition Audio Device High Definition Audio Device Graphic ATI Mobility Radeon HD Series - GB GDDR OS Microsoft Windows Ultimate -bit Multiprocessor Free Service Pack it's weird that I've finished writing this without a BSOD Here is the Zip file Created with SF Diagnostic Tool

A:BSOD ntoskrnl.exe , All the Time !! Crash Address ntoskrnl.exe+80640

Code:
fffff800`00b9cc48 fffff880`010b75fcUnable to load image \SystemRoot\System32\Drivers\sptd.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for sptd.sys
*** ERROR: Module load completed but symbols could not be loaded for sptd.sys
sptd+0x4b5fc
Daemon Tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known BSOD causer. Uninstall Alcohol 120% at first. Then download SPTD standalone installer from Disk-Tools.com, and execute the downloaded file as guided below :
Double click to open it.
Click this button only:

If it is grayed out, as in the picture, there is no more SPTD in your system, and you just close the window.
Next uninstall Virtual CloneDrive, as vclone.sys is as fatal as SPTD.sys, too.
After doing these two, report the situation back.

http://www.sevenforums.com/bsod-help-support/309093-bsod-ntoskrnl-exe-all-time-crash-address-ntoskrnl-exe-80640-a.html
Relevancy 52.89%

Got my first blue screen of death tonight had firefox opened one watching youtube video another browsing internet After bsod /adress (ntoskrnl.exe+72a40) caused by driver (ntoskrnl.exe) BSOD it restarted i login but just black screen with cursor ctrl alt delete worked so i shut my computer down Boot up normally after check my minidump file bsod cause BSOD caused by driver (ntoskrnl.exe) /adress (ntoskrnl.exe+72a40) by ntoskrnl exe Did little search on google find BSOD caused by driver (ntoskrnl.exe) /adress (ntoskrnl.exe+72a40) has to do with ram and hard drive Downloaded wd data life guard diagnostic for my mechanic drive which is healthy but my ssd on shows failed end to end error rate value threshold worst is all in SMART statue Im not sure if i can trust this wd diagnostic on my crucial ssd there are alot of unknown in SMART statue too Theres no ssd diagnotic for crucial there is a firmware not sure if it helps So i downloaded and ran crystaldiskinfo on my ssd health statues says good it doesnt say end to end error rate like wd Instead same ID B line says quot unused reserve nand blocks quot instead Is my ssd good i havent ran a test on my ram yet This is almost month old build Asrock x x killer i k gtx w crucial x gb crucial gb ssd wd blue tb Heres info of bsod with bluescreenview Bug Check String- IRQL GT ZERO AT SYSTEM SERVICE Bug Check Code - x a Parameter - dc a Parameter - Parameter - Parameter - fffff b Caused By Driver- ntoskrnl exe Caused By Address- ntoskrnl exe a File Description- NT Kernel amp System

A:BSOD caused by driver (ntoskrnl.exe) /adress (ntoskrnl.exe+72a40)

Blue Screen of Death (BSOD) Posting Instructions

http://www.sevenforums.com/bsod-help-support/367819-bsod-caused-driver-ntoskrnl-exe-adress-ntoskrnl-exe-72a40.html
Relevancy 52.89%

BSOD random, probably under heavy load situations. I dont know how to do.


DM log collector file attached

many thanks

A:BSOD random most times ntoskrnl.exe+748c0 and ntoskrnl.exe+74ec0

Hi berdini.


Code:
DEFAULT_BUCKET_ID: GS_FALSE_POSITIVE_MISSING_GSFRAME
Scan the system for possible virus infection with the following programs.
Anti-rootkit utility TDSSKiller
Windows Defender Offline
Let us know the results.
____________________________________

Code:
BugCheck F7, {fffff8800a01ff08, f8800125d135, ffff077ffeda2eca, 0}

Probably caused by : Ntfs.sys ( Ntfs!_report_gsfailure+26 )

Followup: MachineOwner
---------

http://www.sevenforums.com/bsod-help-support/373211-bsod-random-most-times-ntoskrnl-exe-748c0-ntoskrnl-exe-74ec0.html
Relevancy 52.89%

I'm getting random Blue Screens and can't figure out why. I'm not running any hardcore programs. I'm mostly just using Microsoft Office and Firefox. The BSOD's seem to happen when I'm in Outlook, Excel or Firefox. Haven't been able to determine exactly which at the time as I'm moving back and forth between them quite often.

I've tried the SFC command and it didn't find anything. I used BlueScreenViewer but not a lot of help. All drivers for sound and video have been updated. I've also updated the firmware to the Crucial M4 SSD version 040H.

Any insight would be great.

Specs:
Laptop - HP EliteBook 8560w
CPU - Intel i7-2670QM
RAM - Hynix/Hyundai 8.0 GB Ram
SSD - M4-CT256M4 SSD
Audio - AMD High Definition Audio
Video - AMD FirePro M5950
OS - Windows 7 Pro 64-bit

A:Random BSOD Reporting ntoskrnl.exe+75c40 & ntoskrnl.exe+7efc0

Update the firmware of your Crucial M4-CT256M4SSD2.

And, Uninstall McAfee Using McAfee Removal Tool. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.
Download, install and update those, and then run full system scans with both of them, one by one.

Free up the startup.
Click on the Start button
Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the “Startup” tab.
Deselect all items other than the antivirus and touchpad driver SynTPEnh.
Apply > OK
Accept then restart.
Let us know the results.

http://www.sevenforums.com/bsod-help-support/281927-random-bsod-reporting-ntoskrnl-exe-75c40-ntoskrnl-exe-7efc0.html
Relevancy 52.46%

When I put my pc in sleep mode it often crashes: the screen goes normally in sleep mode, but the pc continues to stay awake for several minutes than BSOD & restart or BSOD & shut off.
Thanks to BlueScreenView I found what is seemingly the guilty process, but I don't know what to do now.
Attachment 315989
Thanks
Also, sorry for my bad english.

A:BSOD when goes sleep, ntoskrnl.exe+e96d2/ntoskrnl.exe+81e7a

Your HUAWEI Mobile Connect driver is causing issues here.


Code:
*** WARNING: Unable to verify timestamp for ew_jubusenum.sys
*** ERROR: Module load completed but symbols could not be loaded for ew_jubusenum.sys
Probably caused by : ew_jubusenum.sys
If it's a necessary driver then update it but if not then please completely remove it.
I'm not that familiar with such devices but it should be under Network Adapters, right click on the device and click properties, then click on the driver tab and update.


Code:
fffff880`015e0000 fffff880`015fc000 ew_jubusenum T (no symbols)
Loaded symbol image file: ew_jubusenum.sys
Image path: \SystemRoot\system32\DRIVERS\ew_jubusenum.sys
Image name: ew_jubusenum.sys
Timestamp: Mon Aug 20 01:55:56 2012 (50318B1C)
CheckSum: 0001CF99
ImageSize: 0001C000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

http://www.sevenforums.com/bsod-help-support/330151-bsod-when-goes-sleep-ntoskrnl-exe-e96d2-ntoskrnl-exe-81e7a.html
Relevancy 51.6%

Hello Recently I got a few bluescreens while playing World of Warcraft which I thought was very weird because all of my hardware is pretty new Here is some info about my computer Intel i - GHZ EVGA GTX SSC super superclocked - the fans are designed not to turn on until card reaches c gb Hyper X Fury ram tb WD Black HDD Windows OS At first I noticed three bluescreens then I used EVGA Precision X with a custom aggressive fan profile and BSOD ntoskrnl.exe+74ec0 ntoskrnl.exe address the problem went away temporarily but then the computer crashed later on I'm not sure if that's relevant or not I ran a diagnostic on my harddrive and processor and both were fine The RAM seems more difficult to test because it said something about usb drives so I decied to stray away from that unless it was absolutely necessary and then get help from someone who BSOD ntoskrnl.exe address ntoskrnl.exe+74ec0 knows what they're doing I am going to upload the dump files that were saved by bluescreenview Any help at all would be greatly appreciated

A:BSOD ntoskrnl.exe address ntoskrnl.exe+74ec0

CRITICAL_OBJECT_TERMINATION BSODs (0xf4) are usually related to an issue with the hard drive.

If you have an SSD, make sure that the firmware is upgraded.

If HDD, run SeaTools for DOS, LONG test - Hard Drive (HDD) Diagnostics - Sysnative Forums

Regards. . .

jcgriff2

`

http://www.techsupportforum.com/forums/f299/bsod-ntoskrnl-exe-address-ntoskrnl-exe-74ec0-975273.html
Relevancy 51.6%

Hi, I've been having this BSOD appear very randomly.

IRQL_NOT_LESS_OR_EQUAL 0x0000000a
(all reports in .rar file)

Sometimes within 1 hour, other times as long as 24hrs+. I've got my BIOS/Drivers up to date for my CPU, Graphics Card, and Motherboard. I've rigorously tested my memory and have never had any issues arise.

It has occurred during
3d gaming,
when the system has been idle,
also when browsing with firefox or ie.

Any help at all would be appreciated, I've struggled with this BSOD for years I would love to finally find whats causing it.

Thank you.

A:BSOD ntoskrnl.exe+26ee0 ntoskrnl.exe+7cc40

  
Quote: Originally Posted by postal


Hi, I've been having this BSOD appear very randomly.

IRQL_NOT_LESS_OR_EQUAL 0x0000000a
(all reports in .rar file)

Sometimes within 1 hour, other times as long as 24hrs+. I've got my BIOS/Drivers up to date for my CPU, Graphics Card, and Motherboard. I've rigorously tested my memory and have never had any issues arise.

It has occurred during
3d gaming,
when the system has been idle,
also when browsing with firefox or ie.

Any help at all would be appreciated, I've struggled with this BSOD for years I would love to finally find whats causing it.

Thank you.


First lets start with asacpi.sys yours dated 2005
1-ASACPI.SYS

The pre 2009 version of this driver is a known BSOD cause.

Please visit this link: ASUS teK Computer Inc. -Support- Drivers and Download P7P55D LE
ASUSTeK Computer Inc. -Support- Drivers and Download P7P55D LE

Scroll down to the Utilities category, then scroll down to the "ATK0110 driver for WindowsXP/Vista/Windows 7 32&64-bit" (it's about the 12th item down).
Download and install it.
Go to C:\Windows\System32\drivers to check and make sure that the ASACPI.SYS file is date stamped from 2009 or 2010 (NOT 2005).

http://www.sevenforums.com/bsod-help-support/194256-bsod-ntoskrnl-exe-26ee0-ntoskrnl-exe-7cc40.html
Relevancy 51.6%

Does anyone have any idea what could be causing these BSOD errors? It started with the +74200 error about a month ago (enduser is just now informing IT) and now it is the +73c40. I've already done several Memory tests to no avail. I'm about to just
reimage but don't want to if it's just a driver issue. 

Thanks
TravisD

https://social.technet.microsoft.com/Forums/en-US/afea0b11-7904-4025-8dd6-c76d6cfa02d8/ntoskrnlexe74200-amp-ntoskrnlexe73c40-bsod?forum=w8itprogeneral
Relevancy 51.6%

Hi there,

Recently I've been getting BSOD while playing WoW. I'm not sure what details to give other than the dump so I'll just tell you about my computer:

Intel i5 4690 3.5-3.9 GHZ
EVGA GTX 970 SSC (super superclocked - the fans are designed not to turn on until card reaches 60c)
16gb Hyper X Fury ram
1tb WD Black HDD
Windows 7 OS

I noticed that I haven't crashed yet while EVGA Precision X is up (it has a custom aggressive fan curve I made). Maybe this has to do with the fact that it replaces fan drivers, or something? I don't know. I'm pretty clueless as to what's going on because all these parts are pretty new and it only recently started, but it's crashed three times today. Here are the dumps.
Any help you guys can give would be greatly greatly appreciated. Thanks a ton!
 

A:BSOD ntoskrnl.exe address ntoskrnl.exe+74ec0

Any ideas? It happened again while using EVGA Precision.
 

https://forums.techguy.org/threads/bsod-ntoskrnl-exe-address-ntoskrnl-exe-74ec0.1145229/
Relevancy 51.6%

i am having this problem after i change my video cards i upgraded a 460 SLI to a 680
i have run 3dmark11 to try to replicate the bsod or something and nothing happends
i clean my hardware and change the thermal compound then i played some bf3 and paff the same bsod =(

pd: sorry for my english
i forgot to say that i have the last beta drivers from nvidia because with the WHQL i was having problems in gw2
Attachment 231326

A:BSOD playing bf3, hal.dll hal.dll+12a3b , ntoskrnl.exe ntoskrnl.exe+18

Welcome

For the bug check you're getting go through:
Stop 0x124 - what it means and what to try

Also get a latest version of your BIOS.


Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Yusra\Downloads\Fayer\SF_11-09-2012\091112-23509-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
Machine Name:
Kernel base = 0xfffff800`03667000 PsLoadedModuleList = 0xfffff800`038ab670
Debug session time: Wed Sep 12 06:29:05.072 2012 (UTC + 6:00)
System Uptime: 0 days 7:04:57.025
Loading Kernel Symbols
...............................................................
................................................................
................................
Loading User Symbols
Loading unloaded module list
.....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 124, {0, fffffa80086cf028, ba000000, 400405}

*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : hardware

Followup: MachineOwner
---------

5: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa80086cf028, Address of the WHEA_ERROR_RECORD structure.
Arg3: 00000000ba000000, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000000400405, Low order 32-bits of the MCi_STATUS value.

Debugging Details:
------------------
BUGCHECK_STR: 0x124_GenuineIntel

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

PROCESS_NAME: System

CURRENT_IRQL: f

STACK_TEXT:
fffff880`030acb58 fffff800`03630a3b : 00000000`00000124 00000000`00000000 fffffa80`086cf028 00000000`ba000000 : nt!KeBugCheckEx
fffff880`030acb60 fffff800`037f3b03 : 00000000`00000001 fffffa80`0860b890 00000000`00000000 fffffa80`0860b8e0 : hal!HalBugCheckSystem+0x1e3
fffff880`030acba0 fffff800`03630700 : 00000000`00000728 fffffa80`0860b890 fffff880`030acf30 fffff880`030acf00 : nt!WheaReportHwError+0x263
fffff880`030acc00 fffff800`03630052 : fffffa80`0860b890 fffff880`030acf30 fffffa80`0860b890 00000000`00000000 : hal!HalpMcaReportError+0x4c
fffff880`030acd50 fffff800`0362ff0d : 00000000`00000008 00000000`00000001 fffff880`030acfb0 00000000`00000000 : hal!HalpMceHandler+0x9e
fffff880`030acd90 fffff800`03623e88 : 0000003b`5e9a7a72 fffffa80`0ae15ac8 00000000`00000000 00000000`00000000 : hal!HalpMceHandlerWithRendezvous+0x55
fffff880`030acdc0 fffff800`036e4aac : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : hal!HalHandleMcheck+0x40
fffff880`030acdf0 fffff800`036e4913 : 00000000`00000000 00000... Read more

http://www.sevenforums.com/bsod-help-support/252352-bsod-playing-bf3-hal-dll-hal-dll-12a3b-ntoskrnl-exe-ntoskrnl-exe-18-a.html
Relevancy 51.6%

I keep getting a BSOD (Critical_Object_Termination) but have no idea what is causing the issue. I tried in vain to debug my own minidump files but ended up getting nowhere.

So far i have run MemTest over the weekend with 107 passes. I also ran Prime95 64-bit for 4 hours on each of the FFT tests without error.

I have enabled driver verifier (following the guide on this site) and this has not caused anynew BSOD's.

I also get a random BSOD on startup but it has happened so infrequently i have been unable to boot with disable automatic restart on system failure enabled to capture the stop code.

I really could do with some expert advice please.

This is my first post so i apologise if i have missed something important but i have tried to read as much info as possible before posting.

A:BSOD Ntoskrnl.exe+7efc0 and Ntoskrnl.exe+75c40

Unusual one you got there think it may be a windows problem please run sf tool and upload all files not just dumps and try running an sfc scan
SFC /SCANNOW Command - System File Checker option 2

Check system temperatures also

http://www.sevenforums.com/bsod-help-support/281212-bsod-ntoskrnl-exe-7efc0-ntoskrnl-exe-75c40.html
Relevancy 50.31%

I have been having the BSOD's, during some Daily (Prime95 gaming random, Insta-BSOD) some worst time with my custom built PC Daily BSOD's, some random, some during gaming (Prime95 Insta-BSOD) since it was built I am getting random BSOD's here and there but there does seem to be Daily BSOD's, some random, some during gaming (Prime95 Insta-BSOD) a correlation between a greater occurence when playing games Often I can't play a high-resolution game for more than an hour or two before I crash I heard Daily BSOD's, some random, some during gaming (Prime95 Insta-BSOD) a recommendation to try Prime and I get an insta-BSOD when doing the Blend test I haved tested the memory and did not see any problems Here is the dump report Any help possible would be greatly greatly appreciated I unfortunately am under the suspicion that this is a CPU hardware error and the CPU will have to be replaced but I do need some form of help or confirmation before I take the next step RMA'ing it Sys Info Intel i gb OCZ DDR RAM ATI Radeon HD Asus P T Deluxe V Win Hardware is about years old OS Installation is less than a year old Microsoft R Windows Debugger Version AMD Copyright c Microsoft Corporation All rights reserved Loading Dump File C Windows Minidump - - dmp Mini Kernel Dump File Only registers and stack trace are available Symbol search path is SRV DownstreamStore http msdl microsoft com download symbols Executable search path is Windows Kernel Version Service Pack MP procs Free x Product WinNt suite TerminalServer SingleUserTS Built by amd fre win sp gdr - Machine Name Kernel base xfffff c PsLoadedModuleList xfffff e Debug session time Fri Nov UTC - System Uptime days Loading Kernel Symbols Loading User Symbols Loading unloaded module list Bugcheck Analysis Use analyze -v to get detailed debugging information BugCheck fffffa fa fe a Probably caused by hardware Followup MachineOwner --------- kd gt analyze -v Bugcheck Analysis WHEA UNCORRECTABLE ERROR A fatal hardware error has occurred Parameter identifies the type of error source that reported the error Parameter holds the address of the WHEA ERROR RECORD structure that describes the error conditon Arguments Arg Machine Check Exception Arg fffffa fa Address of the WHEA ERROR RECORD structure Arg fe High order -bits of the MCi STATUS value Arg a Low order -bits of the MCi STATUS value Debugging Details ------------------ BUGCHECK STR x GenuineIntel CUSTOMER CRASH COUNT DEFAULT BUCKET ID VISTA DRIVER FAULT PROCESS NAME System CURRENT IRQL f STACK TEXT fffff ddb fffff c ca b fffffa fa fe nt KeBugCheckEx fffff ddb fffff de fffffa dcba fffffa dcba hal HalBugCheckSystem x e fffff ddba fffff c c fffffa dcba fffff ddf fffff ddf nt WheaReportHwError x fffff ddc fffff c c fffffa dcba fffff ddf fffffa dcba hal HalpMcaReportError x c fffff ddd fffff c bf d fffff ddfb hal HalpMceHandler x e fffff ddd fffff c fe fffffa ebdf hal HalpMceHandlerWithRendezvous x fffff dddc fffff cce c hal HalHandleMcheck x fffff dddf fffff cce nt KxMcheckAbort x c fffff ddf fffff c nt KiMcheckAbort x fffff fd a USBPORT USBPORT NeoValidDeviceHandle x c STACK COMMAND kb FOLLOWUP NAME MachineOwner MODULE NAME hardware IMAGE NAME hardware DEBUG FLR IMAGE TIMESTAMP FAILURE BUCKET ID X x GenuineIntel PROCESSOR CACHE BUCKET ID X x GenuineIntel PROCESSOR CACHE Followup MachineOwner ---------

A:Daily BSOD's, some random, some during gaming (Prime95 Insta-BSOD)

Here are the missing JCGriff2 and perfmon files. Again, any help in regards to this problem I am having are tremendously appreciated. I can fix near anything with a computer, debugging this deep however escapes my knowledge and I don't know who else to turn to.

Note there are four dumps from today. 2 were while playing Skyrim. 2 were while testing Prime95 on Blend mode, insta-crashed within seconds.

http://www.sevenforums.com/bsod-help-support/198049-daily-bsods-some-random-some-during-gaming-prime95-insta-bsod.html
Relevancy 49.45%

Hi,

I get a new BSOD daily and it is driving me crazy, i thought it was first my CCTV software but i have tried three now and they all have the same affect. Every morning when i wake up my PC has crashed. I am starting to think hardware but want some definitive answers before i start spending more money.

Any help is really appreciated as haven't got a clue how to analyse the BSOD dump.

PC Spec:

Windows 7 Pro
Intel pentium G3258 CPU
MSI G-45 motherboard
AMD Radeon R9 280x Graphics card
16GB ram
1TB Hard drive
120gb SSD

http://www.sevenforums.com/bsod-help-support/393365-help-daily-bsod-irql-not-less-equal-always-idle-when-bsod.html
Relevancy 49.45%

all my system icons started looking funny, like they are gone, they are all generic and ugly, i have tried to do a system restore but that did not help....here is what they look like...now i have tried weveral fixs from here http://www.dougknox.com/xp/file_assoc.htm but none have worked. what i have tried from there were the CPL, Directory, EXE, Folder, LNK, and URL, but do not know whatelse to do, those fixs were recommended off a posting i had searched for at annoyances.org here.... http://www.annoyances.org/exec/forum/winxp/1130633327any help ANY would greatly be appreciated...thank you.

A:What Is Happening To My System?

have you done any viruses scans? Also have you checked to see if your logo's are still saved somewhere?

http://www.bleepingcomputer.com/forums/t/38107/what-is-happening-to-my-system/
Relevancy 49.02%

Hello all I am new this is my first post so bear with me I built a system recently to upgrade to a bit system to see if I could get a decent speed out of a basic build I am not a hacker or coder however I have some advanced knowledge of systems and system modification I mention this only to inform advance users that I understand at minimum the basics That being said I have had some odd issues and odd malfunctions or what maybe malfunctions happen with my new system A while back I got what seemed like a basic virus that was caught with avast I deleted it and moved on with out happening my Odd things system. on much issue however my net connection grew to be sluggish and crash heavy So I started looking at system files and functions I noticed some odd characteristic pushing me to start Odd things happening on my system. exporing tools like rkill combofix etc I indeed found a rootkit I deleted it well so I thought with TDSSkiller I was using a win bit home edition I decided to wipe my drives and upgrade to bit n ultimate come to find out some of the odd little things happening are still happening I may be paranoid now but I was hoping to toss up some logs from gmer rkill etc to have the big brains here look at what may be going on Couple of odd things I have an ssd for the operating system I used dban nuke and boot to clean drive yet it seems to still pass on settings from old system rkill is finding local host files that were on infected system Odd things happening on my system. in the new system possible I have duplicate file system I am not a expert with bit systems it may just be how Microsoft built bit on top of x platform Gmer shows some of the same files that I had on infected system or I should say if my memory serves me well I see the same stuff My net connection Odd things happening on my system. gets slow and crash heavy over a short period of time System info on my box win n ult bit security stuff I run jetclean to keep junk down ccleaner and nclean heavy use of internet I am running avast as anti virus superantispyware to clean infections as well as bleeping computer tools I am on a cable isp with router and wifi enabled with hard connection to box in question Anyway I have tons more info but it seems all very convoluted so did not want to confuse you experts if I have not already I am going to post a couple logs please let me know if I need to post any specific logs starting with rkill Rkill by Lawrence Abrams Grinler http www bleepingcomputer com Copyright - BleepingComputer com More Information about Rkill can be found at this link http www bleepingcomputer com forums topic html Program started at AM in x mode Windows Version Windows Ultimate N Service Pack Checking for Windows services to stop No malware services found to stop Checking for processes to terminate No malware processes found to kill Checking Registry for malware related settings No issues found in the Registry Resetting EXE COM amp BAT associations in the Windows Registry Performing miscellaneous checks No issues found Checking Windows Service Integrity WMPNetworkSvc Missing Service WPDBusEnum Missing Service FontCache gt SystemRoot system svchost exe -k LocalService Incorrect ImagePath Searching for Missing Digital Signatures No issues found Checking HOSTS File HOSTS file entries found localhost Program finished at AM Execution time hours s minute s and seconds s Combofix ComboFix - - - - x Microsoft Windows Ultimate N GMT - Running from D ComboFix exe SP Windows Defender Enabled Updated D DDC A- F- fae- E -DA C ACF Files Created from - - to - - - - - - -------- d-----w- c users Default AppData Local temp - - - - -------- d-----w- c windows SysWow Wat - - - - -------- d-----w- c windows system Wat - - - - ----a-w- c windows SysWow x vfw dll - - - - ----a-w- c windows SysWow unrar dll - - - - ----a-w- c windows SysWow ac acm acm - - - - ----a-w- c windows SysWow lagarith dll - - - - ----a-w- c windows SysWow xvidvfw dll - - - - ----a-w- c windows Sy... Read more

A:Odd things happening on my system.

here is a "show hidden file" log
 
Show Hidden by Lawrence Abrams (Grinler)http://www.bleepingcomputer.com/
Copyright 2008-2013 BleepingComputer.com
Show Hidden will display all hidden folders on your computer.
You can use the -f argument to display hidden files as well.
Program started at: 05/24/2013 11:25:44 AM
Windows Version: Windows 7
Please be patient while your hard drives are scanned.
Scanning the C:\ drive
 * C:\$RECYCLE.BIN\S-1-5-21-1333939676-316457160-147855663-1000
 * C:\MSOCache
 * C:\Program Files\Uninstall Information
 * C:\Program Files (x86)\BlueSprig\JetClean\Update
 * C:\Program Files (x86)\InstallShield Installation Information
 * C:\Program Files (x86)\Uninstall Information
 * C:\ProgramData\Microsoft\DRM\Server
 * C:\ProgramData\Microsoft\WwanSvc
 * C:\ProgramData\Microsoft\WwanSvc\Profiles
 * C:\Recovery\9afd5dc1-c3d6-11e2-82a9-e877bb9fc293
 * C:\System Volume Information
 * C:\System Volume Information\SPP
 * C:\System Volume Information\SPP\OnlineMetadataCache
 * C:\System Volume Information\SPP\SppCbsHiveStore
 * C:\System Volume Information\SPP\SppGroupCache
 * C:\Users\All Users\Microsoft\DRM\Server
 * C:\Users\All Users\Microsoft\WwanSvc
 * C:\Users\All Users\Microsoft\WwanSvc\Profiles
 * C:\Users\Default
 * C:\Users\Default\AppData
 * C:\Users\gandg\AppData
 * C:\Users\gandg\AppData\Local\Microsoft\Feeds\{5588ACFD-6436-411B-A5CE-666AE6A92D3D}~
 * C:\Users\gandg\AppData\Local\Microsoft\Feeds\{5588ACFD-6436-411B-A5CE-666AE6A92D3D}~\WebSlices~
 * C:\Users\gandg\AppData\Local\Microsoft\Feeds Cache
 * C:\Users\gandg\AppData\Local\Microsoft\Internet Explorer\DOMStore
 * C:\Users\gandg\AppData\Local\Microsoft\Windows\AppCache
 * C:\Users\gandg\AppData\Local\Microsoft\Windows\AppCache\ZSXFID9F
 * C:\Users\gandg\AppData\Local\Microsoft\Windows\Burn\Burn
 * C:\Users\gandg\AppData\Local\Microsoft\Windows\Burn\Burn1
 * C:\Users\gandg\AppData\Local\Microsoft\Windows\History
 * C:\Users\gandg\AppData\Local\Microsoft\Windows\History\History.IE5
 * C:\Users\gandg\AppData\Local\Microsoft\Windows\History\History.IE5\MSHist012013052420130525
 * C:\Users\gandg\AppData\Local\Microsoft\Windows\History\Low\History.IE5
 * C:\Users\gandg\AppData\Local\Microsoft\Windows\History\Low\History.IE5\MSHist012013052320130524
 * C:\Users\gandg\AppData\Local\Microsoft\Windows\Temporary Internet Files
 * C:\Users\gandg\AppData\Local\Microsoft\Windows\Temporary Internet Files\Content.IE5
 * C:\Users\gandg\AppData\Local\Microsoft\Windows\Temporary Internet Files\Content.IE5\4XKVUVSQ
 * C:\Users\gandg\AppData\Local\Microsoft\Windows\Temporary Internet Files\Content.IE5\JI6HD43H
 * C:\Users\gandg\AppData\Local\Microsoft\Windows\Temporary Internet Files\Content.IE5\M8DJTT7I
 * C:\Users\gandg\AppData\Local\Microsoft\Windows\Temporary Internet Files\Content.IE5\VDIF088S
 * C:\Users\gandg\AppData\Local\Microsoft\Windows\Temporary Internet Files\Low\Content.IE5
 * C:\Users\gandg\AppData\Local\Microsoft\Windows\Temporary Internet Files\Low\Content.IE5\03OUALV8
 * C:\Users\gandg\AppData\Local\Microsoft\Windows\Temporary Internet Files\Low\Content.IE5\DROSZ82S
 * C:\Users\gandg\AppData\Local\Microsoft\Windows\Temporary Internet Files\Low\Content.IE5\FEH92YSW
 * C:\Users\gandg\AppData\Local\Microsoft\Windows\Temporary Internet Files\Low\Content.IE5\PNSJUC4I
 * C:\Users\gandg\AppData\Local\Microsoft\Windows\Temporary Internet Files\Virtualized
 * C:\Users\gandg\AppData\Local\Microsoft\Windows\WebCache
 * C:\Users\gandg\AppData\LocalLow\Microsoft\Internet Explorer\DOMStore
 * C:\Users\gandg\AppData\LocalLow\Microsoft\Internet Explorer\DOMStore\IMD7SG3B
 * C:\Users\gandg\AppData\LocalLow\Microsoft\Windows\AppCache
 * C:\Users\gandg\AppData\LocalLow\Microsoft\Windows\AppCache\P709HE2I
 * ... Read more

http://www.bleepingcomputer.com/forums/t/495694/odd-things-happening-on-my-system/
Relevancy 49.02%

Hii..

I have setup a daily system imaging. The first time I did this it took around 1 hour or so. However nowadays, it takes only ~10 mins or so. I had this idea that during a system image backup, the computer does a full backup, rather than incremental backups.

As you can see it took only 7 mins last time. Because I want to set it up and sort of forget it, I want to make sure that the system is being imaged as I intend it too. However I cannot really know whether the system has been imaged, without doing a full restore.

Is there a way to confirm that this is ok?

Also do the restore points remain preserved in the system image? If not, is there a way to ensure that?

A:Daily System Imaging

Too bad you are using Windows7 imaging. As far as I can see the reports, half of the time people are not able to recover from those images. So I think you are taking your chances. Have a look at this thread where it took me more than 1 week to get this man back on track.

Use a robust imaging program - anything is better than Windows7 imaging.

http://www.sevenforums.com/backup-restore/210436-daily-system-imaging.html
Relevancy 48.16%

I was wondering if anyone knows of any software that can be used to automatically remove any changes to a computer on a daily basis. I have seen software like this before, but I don't remember the name of it, and I am not sure how best to describe it in a google search.

The company I work for has centers all across the US, so it could help to avoid a lot of problems if the computers will automatically revert themselves each day. For example, it would be useful to be able to specify that xyz directories and users' profiles are not affected (so they can keep their data), but settings would get reverted and any unwanted applications like toolbars, etc would get wiped out every day.

Thanks in advance for the help,

Andrew

A:Software to remove any system changes daily

http://www.faronics.com/products/deep-freeze/

http://www.steadierstate.com/
Free or Open Source Deep Freeze Alternatives - AlternativeTo.net

http://www.sevenforums.com/software/340448-software-remove-any-system-changes-daily.html
Relevancy 48.16%

Hello

MY in-laws bought a new computer a few weeks ago.

Windows 7 Home Premium x64 OEM
SP 1
Acer Aspire M1470

bought 3 weeks ago. Been crashing from day one one or two times a day.

Ive tried to update the audiodrivers and the LAN-drivers but still BSODS. Most of the BSODS are memory_management but Ive gotten a few others (page fault in non paged area and pfn_list_corrupt)

Ive also done the windows memcheck and found no errors.
Unfortunately I cant use the perfmon to generate a report. I get an error and Ive tried the guide here making sure the right services are started and set to manual but I just cant get it to work.

Im attaching the jcgriff2 rar-file and hope thats enough.

A:Random BSODS daily, new system

There is only one driver that I find questionable on the system. That is the Samsung Printer driver. We can try some software troubleshooting and some simple hardware troubleshooting, but given it is under warranty, I would advise sending it in to have it looked at. This feels more like a hardware issue to me.

If you would like to check software:Uninstall the Samsung Printer driver through Device Manager: (As an administrative user) Start Menu -> Control Panel -> Hardware and Sound -> Device Manager

Troubleshoot Application Conflicts by Performing a Clean Startup

If you are overclocking any hardware, please stop.

Run Disk Check with both boxes checked for all HDDs and with Automatically fix file system errors checked for all SSDs. Post back your logs for the checks after finding them using Check Disk (chkdsk) - Read Event Viewer Log (you may need to search for wininit instead of chkdsk).
For any drives that do not give the message:
Windows has checked the file system and found no problems
run disk check again as above. In other words, if it says:
Windows has made corrections to the file system
after running the disk check, run the disk check again.

Run the short and long tests with SeaTools for HDDs.SeaTools for Windows

SeaTools for DOS
Remove Avira through Start Menu -> Control Panel -> Uninstall a program and run the Avira registry cleaner afterward. Replace it with Microsoft Security Essentials - Free Antivirus for Windows to test.

An underlying driver may be incompatible\conflicting with your system. Run Driver Verifier to find any issues. To run Driver Verifier, do the following:a. Backup your system and user files
b. Create a system restore point
c. If you do not have a Windows 7 DVD, Create a system repair disc
d. In Windows 7:Click the Start Menu
Type verifier in Search programs and files (do not hit enter)
Right click verifier and click Run as administrator
Put a tick in Create custom settings (for code developers) and click next
Put a tick in Select individual settings from a full list and click next
Set up the individual settings as in the image and click next
Attachment 214961
Put a tick in Select driver names from a list
Put a tick next to all non-Microsoft drivers.
Click Finish.
Restart your computer.

If Windows cannot start in normal mode with driver verifier running, start in safe mode. If it cannot start in safe mode or normal mode, restore the system restore point using System Restore OPTION TWO.

If you are unable to start Windows with all drivers being verified or if the blue screen crashes fail to create .dmp files, run them in groups of 5 or 10 until you find a group that causes blue screen crashes and stores the blue screen .dmp files. The idea with Verifier is to cause the system to crash, so do the things you normally do that cause crashes. After you have a few crashes, upload the crash reports for us to take a look and try to find patterns.

When you are ready to disable Verifier: Start Menu -> All Programs -> Accessories -> Right click Command Prompt -> Run as administrator -> Type the following command and then Enter:verifier /reset-> Restart your computer.

Do the above steps first. We will do more hardware tests if you choose to continue after doing the above.

http://www.sevenforums.com/bsod-help-support/233034-random-bsods-daily-new-system.html
Relevancy 48.16%

Hello - hope someone can help me out here Here are my specs Dell Optiplex Windows Professional SP -bit GB RAM GB usuable Intel Core DUO CPU E GHz NVIDIA Quadro NVS So for the last year or so towards the end of the day programs or certain actions will become non-responsive For instance Adobe file will not open cut amp paste of text will no longer work and once this occurs I know I need to reboot But I Must slow Need RAM? - Reboot Daily & System stumbled on this site and see how users say they go months without having to reboot and I would love to be one of those users I have dual monitors and usually have multiple windows open at any given time So here are many of the programs I run Heavy use MS Outlook IE multiple tabs and or windows KeyChain IE add on which automatically enters my passwords to many different sites This is one of the st programs to become non-responsive Calyx Point A mortgage program Adobe Acrobat Standard ScanSnap for scanning documents into pdf format Windows Explorer to quickly access customer's files to open even more Acrobat windows Occassional use MS Word opened once or twice System slow & Must Reboot Daily - Need RAM? per day but usually not left opened MS Excel opened once or twice per day but usually not left opened Windows fax iTunes So just System slow & Must Reboot Daily - Need RAM? using the heavy use programs I will typically make it through about of my work day before System slow & Must Reboot Daily - Need RAM? computer becomes extremely slow and programs become non-reponsive I thought I might need more RAM so i called Dell tech support and was talked into purchasing a yr subscription to System Mechanic It seems to identify all kinds of issues with my computer corrects them supposedly but then I still have to reboot by the end of the day so i feel like I wasted money on this program My understanding is that Windows can only use so much RAM and anything above GB is a waste of money Is this true Do I need a new computer or CPU Any help suggestions would be greatly appreciated -charles

A:System slow & Must Reboot Daily - Need RAM?

Hi-

Being that you have 32-bit Windows, it wouldn't help to put more RAM in, however, either way, 4GB of RAM is quite a bit. When your computer is really slow, pull up task manager (CTRL + SHIFT + ESC) and then go to the "performance" tab, what is the current CPU and Memory (RAM) usage?

Regards,

Mark

http://www.techsupportforum.com/forums/f217/system-slow-and-must-reboot-daily-need-ram-658321.html
Relevancy 48.16%

Hello I will try to explain this system restore Working System fine reboots to but as best System Working fine but reboots to system restore as I can so if you need any more information please ask and I will gladly answer If this is in the wrong forum I apologize If it is please redirect me and I will post it there I have built computers all containing the EXACT same hardware and software I install windows bit all the drivers for each component and activated the copy of windows The pc will run completely fine running any program I ask it to The problem does not happen until I reboot the computer now this is not always on the first reboot These computers could last a few days and then I reboot and it all breaks When I randomly reboot the system it will boot up showing problems and asking for a system restore So I do the system restore and reinstall a few drivers and the same problem will persist I eventually get fed up with the whole process and decide to completely reinstall Windows thinking maybe I could have done something wrong been doing this for years no problem but it happens After a completely random as far as I can tell amount of time and reboots the system will do it again I am completely stumped on this issue and could really use the help I have managed to get working for a few weeks now but they hard bent cpu pins from the factory and I straightened them out The other ones I have checked and they are fine so it seems The System is running an ASUS P Z -v PRO motherboard EVGA Nvidia TI graphics card i - CPU may be another i but all the ones I have been using have been this so it is safe to assume that is the one I am using pci serial port National Instruments sound input card Gb DDR Corsair XMS ram Corsair TX PSU I have a fairly high knowledge of PC's and troubleshooting but with this problem I am completely stumped Any help would be GREATLY appreciated

A:System Working fine but reboots to system restore

Check your ram.
Memory Diagnostics Tool
Memtest86+ - Advanced Memory Diagnostic Tool
How to use memtest:
RAM - Test with Memtest86+

Also check the hard drive with the manufacturer's diagnostic tools.
Hard Drive Diagnostics Tools and Utilities (Storage) - TACKtech Corp.
Hard Drive Diagnostic Procedure

http://www.sevenforums.com/installation-setup/346131-system-working-fine-but-reboots-system-restore.html
Relevancy 48.16%

I had this (similar) issue several months ago and got some great help by one of the BSOD analysts. I am hoping for some more assistance. I am again getting random BSOD's. It seems like it often happens when I am in Mozilla Firefox or Mozilla Thunderbird, but then again, that is what I am using or at least have open 99% of the time anyway. I am also getting random BSOD's when I am not even at my computer.
Here is my info:
? OS - Windows 7 ? ? x64 ? ? What was original installed OS on system? Win7/64 ? full retail version (YOU purchased it from retailer)? ? Age of system 3 yrs ? Age of OS installation - reinstalled clean 8-18-2011 ? CPU Intel Quad core Q6600 ? Video Card NVIDIA Geforce 9800 GTX+ ? MotherBoard Asus P5Qpro ? Power Supply - brand & wattage OCZ 700SXS ? System Manufacturer Self builtBSOD Files.zip ? Exact model number (if laptop, check label on bottom)

A:BSOD happening again

Do you have Norton Anti Virus Installed?

SYMEFA64.SYS is the reason for last BSOD

Uninstall Norton completely
Then go into your C: or whereever your OS is installed go into Program Files
and delete all Norton folders
Reboot the Machine

While I look at other dump files

http://www.techsupportforum.com/forums/f299/bsod-happening-again-618760.html
Relevancy 48.16%

Hello I recently purchased a Dell which came with Windows installed A little while into using my laptop it started to crash and go to the BSOD and now it is happening more often It seems to happen randomly for example while surfing the net watching - BSOD Happening Often a film or even installing BSOD - Happening Often updates The same message comes up every time it goes to BSOD and goes to memory dump Once my system reboots it seems to work BSOD - Happening Often perfectly fine until the next crash Once rebooted the message found below is shown I have done some research and there seems to be a lot of different advice on why this BSOD - Happening Often could be and how to solve I am not sure how to go about it and would be grateful for some help Should I run a free scan by registry booster and see what comes up Or should I try to upload the dmp to the forum Or will it have been a program I have installed Windows Error Message Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode d BCP BCP BCP BCP OS Version Service Pack Product Files that help describe the problem C Windows Minidump - - dmp C Users AppData Local Temp WER- - sysdata xml Read our privacy statement online if this info is important let me know and I will provide If the online privacy statement is not available please read our privacy statement offline if this info is important let me know and I will provide Again if someone could help I would be really grateful Sikhamo

A:BSOD - Happening Often

  
Quote: Originally Posted by sikhamo


Hello,

I recently purchased a Dell which came with Windows 7 installed. A little while into using my laptop it started to crash and go to the BSOD, and now it is happening more often. It seems to happen randomly; for example while surfing the net, watching a film or even installing updates! The same message comes up every time it goes to BSOD and goes to memory dump. Once my system reboots it seems to work perfectly fine until the next crash. Once rebooted the message (found below) is shown.

I have done some research and there seems to be a lot of different advice on why this could be and how to solve. I am not sure how to go about it and would be grateful for some help. Should I run a free scan by registry booster and see what comes up? Or should I try to upload the dmp to the forum? Or will it have been a program I have installed?

Windows Error Message:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 2057

Additional information about the problem:
BCCode: d1
BCP1: 0000000000000000
BCP2: 0000000000000002
BCP3: 0000000000000008
BCP4: 0000000000000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\043010-21808-01.dmp
C:\Users\....\AppData\Local\Temp\WER-70262-0.sysdata.xml

Read our privacy statement online:
... if this info is important let me know and I will provide

If the online privacy statement is not available, please read our privacy statement offline:
... if this info is important let me know and I will provide

Again, if someone could help I would be really grateful

Sikhamo


We really could use the actual DMp file. use these to find and upload it to us. http://www.sevenforums.com/crash-loc...d-problem.html
Ken

http://www.sevenforums.com/bsod-help-support/81672-bsod-happening-often.html
Relevancy 48.16%

My laptop keeps on crashing. It crashed 3 times today and it seems to have a crash history in the past. Even though it's new, it has had crashes BEFORE I bought it. I can't tell when or how it happens, but please, help me! I'm scared something has happened.

A:BSOD happening whatever im doing

I was just skimming through the unanswered posts and noticed this.
Do you still need help with this problem?

Please provide this information so we can provide a complete analysis (from the Pinned Topic at the top of the forum):
Eight Forums: Blue Screen of Death (BSOD) Posting Instructions
Ten Forums: Solved BSOD - Posting Instructions

http://www.eightforums.com/bsod-crashes-debugging/58183-bsod-happening-whatever-im-doing.html