Windows Support Forum

Error Code 800736B3 on SP1 Update

Q: Error Code 800736B3 on SP1 Update

I have lurked in this forum in the past - always finding answers. Thanks to all the experts contributing to this forum.

This time I joined so I could post, as I have been unable to find a solution to my problem.

I can install all updates except for SP1. I keep getting error 800736B3.

I ran the Update Troubleshooter, which claims to have repaired Win Update components - still same error.

I then successfully ran the hotfix KB947821. The same error occurs.

I ran sfc /scannow & no integrity violations were found.

I also tried again after a clean boot - same error.

I don't have a clue as to what to try now. Any suggestions?

Relevancy 100%
Preferred Solution: Error Code 800736B3 on SP1 Update

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Error Code 800736B3 on SP1 Update

Try reading here

Hopefully stuff in there will help.

http://www.sevenforums.com/windows-updates-activation/146628-error-code-800736b3-sp1-update.html
Relevancy 97.18%

Hi,
I have a problem with Windows Update. Firstly, i got windows update servise not running message. Then I was download the System Update Readiness Tool when i start that i get this error code 0x8007000d. Finally I tried update in windows update again i get this error code 800736B3.
I would greatly appreciate any help with this.

A:Windows Update, error code 800736B3

We also need the CheckSUR.log file created by running the CheckSUR/SURT tool - even if incomplete, it may give us some clues.


Your SFC scan identified the following problems -

Code:
Line 9296: 2014-06-06 13:33:15, Info CSI 00000244 [SR] Repairing 7 components
Line 9297: 2014-06-06 13:33:15, Info CSI 00000245 [SR] Beginning Verify and Repair transaction
Line 9298: 2014-06-06 13:33:15, Info CSI 00000246 [SR] Cannot repair member file [l:22{11}]"lsi_sas.sys" of lsi_sas.inf, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, file is missing
Line 9299: 2014-06-06 13:33:15, Info CSI 00000247 [SR] Cannot repair member file [l:20{10}]"lsi_fc.sys" of lsi_fc.inf, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, file is missing
Line 9300: 2014-06-06 13:33:16, Info CSI 00000248 [SR] Cannot repair member file [l:32{16}]"bthmigplugin.dll" of Microsoft-Windows-BTH-USER, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, file is missing
Line 9301: 2014-06-06 13:33:17, Info CSI 00000249 [SR] Cannot repair member file [l:102{51}]"Microsoft-Windows-IIS-HTTPLogging-Deployment-DL.man" of Microsoft-Windows-Migration-DownlevelManifests, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, file is missing
Line 9302: 2014-06-06 13:33:17, Info CSI 0000024a [SR] Cannot repair member file [l:76{38}]"MediaServer-Multicast-Migration-DL.man" of Microsoft-Windows-Migration-DownlevelManifests, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, file is missing
Line 9303: 2014-06-06 13:33:17, Info CSI 0000024b [SR] Cannot repair member file [l:100{50}]"Microsoft-Windows-IIS-IPSecurity-Deployment-DL.man" of Microsoft-Windows-Migration-DownlevelManifests, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, file is missing
Line 9304: 2014-06-06 13:33:17, Info CSI 0000024c [SR] Cannot repair member file [l:30{15}]"winlogon-DL.man" of Microsoft-Windows-Migration-DownlevelManifests, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, file is missing
Line 9305: 2014-06-06 13:33:17, Info CSI 0000024d [SR] Cannot repair member file [l:24{12}]"msdtcstp.dll" of Microsoft-Windows-Migration-DownlevelManifests, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, file is missing
Line 9306: 2014-06-06 13:33:17, Info CSI 0000024e [SR] Cannot repair member file [l:44{22}]"TabletPCJournal-DL.man" of Microsoft-Windows-Migra... Read more

http://www.sevenforums.com/windows-updates-activation/333896-windows-update-error-code-800736b3.html
Relevancy 97.18%

Hi,

Whenever I try to run windows update it seems to fail, the error code i get is 800736B3.

I have followed the instructions and ran the hotfix and sfc scan however the problem still persists.

I have attached the files that i can, however when compressing the CBS folder it totals to 196MB so its impossible to upload here.

Any help would be much appreciated!

Thanks,

Tim

A:Windows Update Error Code: 800736B3

Hi,

I have now added a drop box link to the CBS folder:

https://www.dropbox.com/s/f920qsjxup5g4hk/CBS.zip?dl=0

Thanks,

Tim

http://www.sevenforums.com/windows-updates-activation/377776-windows-update-error-code-800736b3.html
Relevancy 97.18%

i run Windows 7 Ult 64bit w/PS1. My comps been running great, installing updates perfectly till now.. I have read alot of posts on this and i have tried everything that people have posted as remedies, but nothing seems to work. I am hoping i dont have to re-install Windows again, cause i just did it a week ago.. any help on this would be greatly appreciated

Operating System - MS Windows 7 Ultimate 64-bit SP1

CPU - Intel Core 2 Quad Q6600 @ 2.40GHz 38 ?C
Kentsfield 65nm Technology

RAM - 6.00 GB Dual-Channel DDR2 @ 332MHz (5-5-5-15)

Motherboard - Dell Inc. 0TP406 (CPU)

Graphics - DELL SE198WFP ([email protected])
1024MB GeForce GT 430 (nVidia) 36 ?C

Hard Drives - 313GB Seagate ST3320620AS (RAID) 37 ?C

Optical Drives - TSSTcorp DVD+-RW TS-H653B

Audio High - Definition Audio Device

A:Windows Update Error Code 800736B3

AS you have no replys, take a look at this link, do any of the methods in the accepted answer do anything for you.

Windows update fails to install updates with error code 800736B3 - Microsoft Answers

http://www.techsupportforum.com/forums/f217/windows-update-error-code-800736b3-606350.html
Relevancy 97.18%

Hi,

This is my first post, and not all that clever with pcs, so apologies in advance if I've missed something out.

I have been getting this error code repeatedly when trying to install update KB2922229 for a couple of months now. Never had any problems before. Other updates were installing just fine, but I am now getting the same error code when trying to install update KB2871997. As both of these updates seem to be related to security, I am getting a bit concerned.

I have followed the steps in the Windows Update Posting Instructions, running SURT and an SFC scan. Logs attached.

Hope someone will be kind enough to help with this.

A:Windows Update Error Code 800736B3

I have never seen such a CheckSUR summary before!

Code:
Summary:
Seconds executed: 94
Found 6833 errors
Fixed 6833 errors
CSI Catalog Missing Total count: 7
Fixed: CSI Catalog Missing. Total count: 7
CSI Missing Component Key Total count: 927
Fixed: CSI Missing Component Key. Total count: 927
CSI Missing Pinned Component Key Total count: 15
Fixed: CSI Missing Pinned Component Key. Total count: 15
CSI Missing Identity Total count: 2026
Fixed: CSI Missing Identity. Total count: 2026
CSI Missing C Mark Total count: 1617
Fixed: CSI Missing C Mark. Total count: 1617
CSI Payload File Missing Total count: 24
Fixed: CSI Payload File Missing. Total count: 24
CSI F Mark Missing Total count: 2232
Fixed: CSI F Mark Missing. Total count: 2232
The SFC scan is clear - which in view of the above, is rather surprising.

Have you tried installing the updates again since running the CheckSUR/SURT?

If not, please do so, and let us know what happens - First do a check for Updates, and see if the updates appear at all - they may not.

http://www.sevenforums.com/windows-updates-activation/332755-windows-update-error-code-800736b3.html
Relevancy 97.18%

CBS.zip is attached. can anyone help with this error code. I cannot run windows update. This error code 800736B3 is the result every time. I have ran cmd spf scan, I have ran the window repair tools. Nothing will do it. Can someone please help?

A:Windows update error code 800736B3

Hello and welcome tenlakes mate I see you have done the sfc and I would suggest you run this as well if you haven't already
http://www.sevenforums.com/tutorials/433-disk-check.html < if necessary include the /f and /r in the command line as per Option2

just for another option you could run these they don't take long and will eliminate anything from that direction
http://www.superantispyware.com/
http://www.malwarebytes.org/products/malwarebytes_free/
http://www.bleepingcomputer.com/download/adwcleaner/
ADW download from bleeping computer delete any rubbish found with the malware scans
(NB If one is running Kaspersky security it may rant about ADW - just ignore it or disable Kaspersky while the ADW is being used)

http://www.sevenforums.com/windows-updates-activation/368372-windows-update-error-code-800736b3.html
Relevancy 97.18%

Hi, I've been receiving error code 800736b3 when trying to install 2 security updates and I don't know what the problem is.

A:Windows Update error code 800736b3

When this happens to me (just did - code 8007038) I install the updates one at a time.
Worked for me.

http://www.sevenforums.com/windows-updates-activation/334740-windows-update-error-code-800736b3.html
Relevancy 97.18%

Hi
You must get this a lot but I've tried every method mentioned before here.

I get this error when installing updates. Can someone guide me on how to troubleshoot it?

A:Windows Update Error Code 800736B3

What updates are you trying to install?

http://www.eightforums.com/windows-updates-activation/67057-windows-update-error-code-800736b3.html
Relevancy 95.89%

I've been trying to solve this for a few months now but I haven't gotten anywhere. I've followed all the instructions here and they still continue to fail.

Windows Update Posting Instructions
I would really appreciate any insight as to what you think may be causing the issue, reformatting would really set me back since this computer has some industry specific CAD programs that are a pain to setup.

thanks again,Mark

For some reason I cant post an attachment &quot;attach button doesn't respond, in fact none of them do&quot;, I'll add a reply to the thread to see if I can then.

Update: Sorry about the missing attachments, I moved them out of the folder and forgot to attach, there are a couple of older CBS Persist files if you need them.

thanks

Mark

A:Window Update failing error code 800736B3

The error code 9C59 appeared when I tried to add Internet Explorer 11 to the update, prior to that it wasn't there.

http://www.sevenforums.com/windows-updates-activation/360726-window-update-failing-error-code-800736b3.html
Relevancy 95.89%

Hi.
I have a problem with Windows Update. It continues to fail with error code 800736B3. I have tried the update troubleshooter for Windows, I have ran scannow, I also have installed the update readiness tool and hotfix.
Still the updates fail.
I would greatly appreciate any help with this.
I have included the CBS flolder contents.
Thank you in advance for any insight!!!!!
Attachment 310809

Attachment 310811

Attachment 310812

Attachment 310813

Attachment 310814

Attachment 310815

Attachment 310819

Attachment 310820

Attachment 310821

A:Window Update failing error code 800736B3

CheckSUR shows this...

Code:
Unavailable repair files:
winsxs\manifests\msil_mscorlib.resources_b77a5c561934e089_6.1.7601.17648_en-us_6687c1de75c8e03a.manifest
winsxs\manifests\msil_mscorlib.resources_b77a5c561934e089_6.1.7601.21768_en-us_4fbc1bb28f6e72ee.manifest
I'll post a fix for it later - I have to get to work now

http://www.sevenforums.com/windows-updates-activation/325648-window-update-failing-error-code-800736b3.html
Relevancy 95.89%

Hi.
I have a problem with Windows Update. It continues to fail with error code 800736B3. I have tried the update troubleshooter for Windows, I have ran scannow, I also have installed the update readiness tool and hotfix.
Still the updates fail.
I would greatly appreciate any help with this.

A:Window Update failing error code 800736B3

Please follow the Windows Update Posting Instructions and post the requested data

If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

http://www.sevenforums.com/windows-updates-activation/359540-window-update-failing-error-code-800736b3.html
Relevancy 95.03%

Hi there,

I have a problem with Windows Update - it continually fails to install update KB2966583 (which is about 2.5MB) and brings up error code 800736B3. I have tried the update troubleshooter for Windows, the update readiness tool and hotfix.

Can anyone help me with this? Thanks in advance.

A:Windows Update KB2966583 fails, error code 800736B3

Please follow the Windows Update Posting Instructions and post the requested data
If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

http://www.sevenforums.com/windows-updates-activation/346121-windows-update-kb2966583-fails-error-code-800736b3.html
Relevancy 95.03%

Hello I'm having a problem installing Windows Updates on my Windows Home Premium -bit PC - the update process ends with the error code B see attached screenshot I have tried following several suggested courses of action I obtained from several sources none of which has resolved the problem including Methods amp of Microsoft's Windows update error code B failes to install KB - Microsoft Community sfc scannow 800736B3 Update Code - 7 64-bit Error Home Windows Premium - gt no errors reported System Update Readiness Tool - gt downloaded installed successfully - no errors reported After running both of these restarted my PC and then tried to install the Windows updates again - no luck same Windows 7 Home Premium 64-bit Update - Error Code 800736B3 error reported So now I will see if anyone here can help me Thank-you very much in advance for any assistance you can provide Kevin p s the CBS zip file I created as per the Windows Update Posting Instructions was MB so too large to post There are several large cab files in that folder CbsPersist cab - can I exclude those from the zip file Edit Added CBS zip file with log files Windows 7 Home Premium 64-bit Update - Error Code 800736B3 only from C Windows Logs CBS folder

A:Windows 7 Home Premium 64-bit Update - Error Code 800736B3

I'm trying to figure out what exactly this error code means... it's not as easy to find like BSOD bugcheck codes, lol.

What updates failed exactly?

http://www.sevenforums.com/windows-updates-activation/364460-windows-7-home-premium-64-bit-update-error-code-800736b3.html
Relevancy 93.74%

Windows 7 SP1 Home Premium.
I am no longer getting any security updates because the update for Windows Update fails with Error Code 800736B3.

SFC /SCANNOW reports no errors.
C:\Windows\system32>sfc /scannow
Beginning system scan. This process will take some time.
Beginning verification phase of system scan.
Verification 100% complete.
Windows Resource Protection did not find any integrity violations.

I have attached the CBS folder without the CbsPersist.cab files.

I have already tried the Microsoft KB How to update the Windows Update Agent to the latest version

Attachment 333503

A:Windows Update Agent 7.6.7600.320 Fails - Error Code 800736B3

There's nothing apparently amiss in any of the uploaded files.
Please upload the CBSPersist files, and the C:\Windows\windowsupdate.log file

http://www.sevenforums.com/windows-updates-activation/345786-windows-update-agent-7-6-7600-320-fails-error-code-800736b3.html
Relevancy 84.28%

As title. Im using W7 64-bit version and its a cumulative security update for IE8.
Microsoft charges me to try and email my issues, so id thought id try here first.

what should i do to solve this problem? I have disabled my Kaspersky and no change. I have also downloaded it manually and it just says it cant be installed.

A:trying to use update KB980182 gives code 800736B3?!?!?!

Is Windows Defender on? See if disabling it in 'services' helps.

http://www.sevenforums.com/windows-updates-activation/76089-trying-use-update-kb980182-gives-code-800736b3.html
Relevancy 83.42%

Windows 7 Fail to Update: Code 800736B3 - Getting error on update CBS

A:Windows 7 Fail to Update: Code 800736B3

The SFC log seems incomplete, please run SFC /SCANNOW again
Windows Update Posting Instructions

Step 4 asks you to copy the CBS folder to your desktop and put it in a zip folder.
Upload the zip folder when you post again.

If the zip folder is too big for the forum, upload just the CBS.log from the CBS folder copy on your Desktop.
Please add your SF Systems Specs by following this tutorial: System Info - See Your System SpecsIn the System Manufacturer/Model Number field, manually type Desktop or Laptop adding it to the information already in the field.
Specify Custom Build as the manufacturer if it is not an OEM machine.
The tool does not fill in this information but it is very important if someone has to research drivers or hardware for your machine.
Log on to Sevenforums (SF) and let the tool fill in you System specs on your SF profile.

Full instructions are in the tutorial. It's a simple process and it makes that information readily available on your posts. You don't have to retype the information in any thread.

Click here to view your system specs on SevenForums.

Click on My System Specs in the lower left of any post by any member to see what is presented about their machine.

Thanks

http://www.sevenforums.com/windows-updates-activation/338201-windows-7-fail-update-code-800736b3.html
Relevancy 80.41%

Im getting this error code 800736B3. Can anyone help me.

A:error code 800736B3 installing SP1

Put the win7 disc in and choose upgrade then after that it will restart.

After you have acepted the upgrade it will allow you to install the sp1 .

Once win7 has upgraded ,but still keeping your system in tact ,will start the whole update process. After about a hour or two of updates it will install sp1 with no issue .

Also if you are useing a highend gaming card virus protect etc it might keep it from installing as well

http://www.sevenforums.com/windows-updates-activation/149630-error-code-800736b3-installing-sp1.html
Relevancy 80.41%

error installing updates KB2998812 , KB2977759 and KB976932 reverting changes

attaching CBS Logs collection

A:error code 80073AA2 and 800736B3

KB2998812 , KB2977759 installed, error code 80073AA2 solved by deleting WINEVT folder in registry

http://www.sevenforums.com/windows-updates-activation/354865-error-code-80073aa2-800736b3.html
Relevancy 80.41%

Hi Win SP fails installation with Error Code B I have tried a the solutions as suggested by microsoft without luck I also re-installed Win Ultimate using the Upgrade Win Installation 800736B3 SP1 7 Error Code option but the situation is unchanged According to the log of CheckSUR there is CSI missing identity and CSI Payload files missing CSI Below is the CheckSUR file contents Checking System Update Readiness Binary Version Package Version - - Checking Windows Servicing Packages Checking Package Manifests and Catalogs Checking Package Watchlist Checking Component Watchlist Checking Packages Checking Component Store f CSI Payload File Missing x jsproxy dll x microsoft-windows-i tocolimplementation bf ad e none a bc d dc f CSI Missing Identity x appid prnxx inf bf ad e ad fefc dc f CSI Payload File Missing x iiswmi mfl x microsoft-windows-i atibility resources bf ad e ar-sa a c b f fc Summary Seconds Win 7 SP1 Installation Error Code 800736B3 executed Found errors CSI Missing Identity Total count CSI Payload File Missing Total count CheckSUR persist contents Checking System Win 7 SP1 Installation Error Code 800736B3 Update Readiness Binary Version Package Version - - Checking Win 7 SP1 Installation Error Code 800736B3 Windows Servicing Packages Checking Package Manifests and Catalogs Checking Package Watchlist Checking Component Watchlist Checking Packages Checking Component Store f CSI Payload File Missing x jsproxy dll x microsoft-windows-i tocolimplementation bf ad e none a bc d dc f CSI Missing Identity x appid prnxx inf bf ad e ad fefc dc f CSI Payload File Missing x iiswmi mfl x microsoft-windows-i atibility resources bf ad e ar-sa a c b f fc Summary Seconds executed Found errors CSI Missing Identity Total count CSI Payload File Missing Total count Checking System Update Readiness Binary Version Package Version - - Checking Windows Servicing Packages Checking Package Manifests and Catalogs Checking Package Watchlist Checking Component Watchlist Checking Packages Checking Component Store f CSI Payload File Missing x jsproxy dll x microsoft-windows-i tocolimplementation bf ad e none a bc d dc f CSI Missing Identity x appid prnxx inf bf ad e ad fefc dc f CSI Payload File Missing x iiswmi mfl x microsoft-windows-i atibility resources bf ad e ar-sa a c b f fc Summary Seconds executed Found errors CSI Missing Identity Total count CSI Payload File Missing Total count How can I resolve this and install SP Thanks erwin

A:Win 7 SP1 Installation Error Code 800736B3

We need the CBS.log as well please...

Please follow the Windows Update Posting Instructions and post the requested data

http://www.sevenforums.com/windows-updates-activation/312694-win-7-sp1-installation-error-code-800736b3.html
Relevancy 79.55%

For months now I've had windows tell me that I have some updates to be installed. Every time I try it fails to update giving me the error code: 800736B3.

A:Error Code: 800736B3 with 7 failed updates

also my cbs.log was too big to fit in that one post so i had to make another one.

http://www.sevenforums.com/windows-updates-activation/343776-error-code-800736b3-7-failed-updates.html
Relevancy 78.69%

Hi after successfully installing windows my first windows install since XP after which I moved to Ubuntu and doing the initial set-up etc installing my own anti virus software and MS Office etc I thought it was time to let it update itself however every time I tell it to update then shut down it fails I tried to troubleshoot updates failing 800736B3 with 7 Windows code error it using the MS help box which was very little actual help and then tried to initiate the update manually however when it comes to installing some windows security and system updates and some IE updates installation fails resulting in error code B whatever that means The updates it fails on are Quote security update for INternet explorer for windows KB security update for windows KB security update for windows KB update for Windows 7 updates failing with error code 800736B3 internet explorer compatability view list for windows KB update for internet explorer for windows KB update for windows KB I'm currently running avast v home edition following win informing me that it would not allow AVG to run it was from an 'untrusted source' apparently despite having been working a few days previously but thats another problem entirely Any help than can be offered will be much obliged All I've been able to Windows 7 updates failing with error code 800736B3 turn up from googling is a command that un-registers windows which then for some reason allows the updates to occur following which I can use my original activation code given to me by digital river with the student upgrade deal to re-activate windows although I am reluctant to try this Many thanks civint

A:Windows 7 updates failing with error code 800736B3

Have never had Avast free home interfere with anything, but you can disable it to try the Updates by right clicking it's icon in system tray and "turn off real time protection"

I note that another recent thread on this error found by Googling also remains unresolved.

If you bought your Win7 retail, you are entitled to MS excellent tech support which will work the case through to satisfaction. Those Updates are standard and can wait a few days.

http://www.sevenforums.com/installation-setup/36366-windows-7-updates-failing-error-code-800736b3.html
Relevancy 75.25%

Okay I currently have the CBS file compressing but here's the basic rundown of my problem: Updates fail to install and gives me error code 800736B3, no matter how I try to install them, one at a time, all at once, on shutdown, while computer is running, etc. It has continually asked me to run checkdisk when I turn it on and won't run unless I do, and when it does run, it deletes files that are Corrupted, I think? Has crashed my computer once this past week which made me begin to look into the issue

Edit- The file won't attach normally so I've uploaded it to a public Google drive.
Link for that is here. https://drive.google.com/folderview?...Tg&usp=sharing

A:Windows Update Error 800736B3

Can you complete this Tutorial. If you can please do.

Windows Update Posting Instructions

http://www.sevenforums.com/windows-updates-activation/373124-windows-update-error-800736b3.html
Relevancy 75.25%

I have a computer that has been failing to install the IE cumulative updates. It is now also failing to install the bundled security updates (KB3192391 for example). I have tried the system readiness tool, clearing out the database, manually installing,
removing/re-adding IE from Windows features, and running SFC scan. I cannot find a solution for error 800736B3. Anyone know any other things I can do?
This is for a business computer. Would I qualify for free Microsoft support? If I do, how do I start that process?

https://social.technet.microsoft.com/Forums/en-US/77791b84-fa65-4e6b-a2ff-6ab21a7e926e/windows-update-error-800736b3?forum=w7itprosecurity
Relevancy 75.25%

Hi
I have problems with Windows Update, it does not install updates.
I have run SURT and SFC Scan.
Logs enclosed.

Many thanks for your help!

A:Windows Update: error 800736B3

This is the only error in the SFC scan...

Code:
Line 3507: 2015-02-27 11:22:03, Info CSI 00000310 [SR] Repairing 1 components
Line 3508: 2015-02-27 11:22:03, Info CSI 00000311 [SR] Beginning Verify and Repair transaction
Line 3511: 2015-02-27 11:22:03, Info CSI 00000313 [SR] Cannot repair member file [l:22{11}]"PINTLGB.IMD" of Microsoft-Windows-IME-Simplified-Chinese-Core, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
Line 3514: 2015-02-27 11:22:04, Info CSI 00000315 [SR] Cannot repair member file [l:22{11}]"PINTLGB.IMD" of Microsoft-Windows-IME-Simplified-Chinese-Core, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
Line 3515: 2015-02-27 11:22:04, Info CSI 00000316 [SR] This component was referenced by [l:202{101}]"Microsoft-Windows-Foundation-Package~31bf3856ad364e35~amd64~~6.1.7601.17514.WindowsFoundationDelivery"
Line 3520: 2015-02-27 11:22:04, Info CSI 00000319 [SR] Could not reproject corrupted file [ml:520{260},l:62{31}]"\??\C:\Windows\IME\IMESC5\DICTS"\[l:22{11}]"PINTLGB.IMD"; source file in store is also corrupted
Line 3533: 2015-02-27 11:22:05, Info CSI 0000031b [SR] Repair complete
I'll post a fix protocol later.

http://www.sevenforums.com/windows-updates-activation/362678-windows-update-error-800736b3.html
Relevancy 74.39%

I recently noticed that the system was trying to do updates every day at closedown and found that update was giving a return code of b I have run SURT several times and it doesn't seem to give any code giving return Windows giving restores x00000022 update 800736b3; results or should I be looking somewhere else I ran sfc scannow and extracted the results and they are in sfcdetails txt Windows update giving return code 800736b3; restores giving x00000022 attached SFC Windows update giving return code 800736b3; restores giving x00000022 said there were some files it couldn't fix even though sfcdetails txt says it has fixed all of them CBS zip is much too big to upload using the paperclip - is there another way I tried restoring to an earlier restore point and unfortunately all the attempted updates have flushed my list of restore points - and the oldest few all give me a return code of x Not sure if this is one problem or two I am reluctant to do a System Recovery as it sounds pretty drastic - help would be much appreciated PS Is any more info required

A:Windows update giving return code 800736b3; restores giving x00000022

The only errors in SFC are these...

Code:
2015-06-14 21:41:16, Info CSI 000005e7 [SR] Repairing 1 components
2015-06-14 21:41:16, Info CSI 000005e8 [SR] Beginning Verify and Repair transaction
2015-06-14 21:41:16, Info CSI 000005ea [SR] Cannot repair member file [l:24{12}]"utc.app.json" of Microsoft-Windows-Unified-Telemetry-Client, Version = 6.1.7601.18839, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2015-06-14 21:41:16, Info CSI 000005ec [SR] Cannot repair member file [l:66{33}]"telemetry.ASM-WindowsDefault.json" of Microsoft-Windows-Unified-Telemetry-Client, Version = 6.1.7601.18839, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
...which are caused by an MS update which they messed up the file-coding on and may get around to fixing sometime.
It's not critical, but you could get rid of it by uninstalling KB3022345 and/or KB3068708 and hiding the latter when it reappers in your offered updates list.

Please post the C:\Windows\Logs\CBS\CheckSUR.log and C:\Windows\Logs\CheckSUR.Persist.log files.

http://www.sevenforums.com/windows-updates-activation/372918-windows-update-giving-return-code-800736b3-restores-giving-x00000022.html
Relevancy 74.39%

Hi,

i need help - my windows update doesn't work.

I put 2 cbs (CBS_1part and CBS_2part) - becouse log have 10MB after zip'ing.
(must unpack CBS_1part and CBS_2part to one folder after that unpack CBS.log)

file other.zip have another files from CBS folder.

A:Windows update Error 80243004 and 800736B3

What on earth did you use to split the Zip files? I've tried 3 different tools, and all tell me the files are corrupt.

Please just zip two/3 files together and upload them separately, then do another 2/3 files.

http://www.sevenforums.com/windows-updates-activation/371744-windows-update-error-80243004-800736b3.html
Relevancy 74.39%

Hi,

I'm stuck with 43 waiting updates and the update error 800736B3.
Tried now several approaches from the forum to get it resolved, but no resolution of the issue until now.

sfc /scannow reports no issues.

So I ran the upgrade pack to produce to cbs log.

Maybe one could give me a hint how or if it could be resolved somehow.

Thanks in advance.

Northseasurfer

A:Win 7 Prof. 64bit Update error 800736B3

There's no problems showing in any of the data files.
Please upload your C:\Windows\windowsupdate.log file.

http://www.sevenforums.com/windows-updates-activation/360820-win-7-prof-64bit-update-error-800736b3.html
Relevancy 74.39%

Vista Update Error 800736B3 KB2803821 Really struggling to fix Windows Vista update errors. There are 9 consistently failing important updates (plus it looks like many others on the attachments named screen?). I have followed all the scan and registry fix instructions but it seems to be making no difference.
Error number 800736B3 is shown then KB2803821. Please could someone help with a fix, I have attached the relevant screen shots and codes I think. (Added screen 1 and 2 showing better detail of the failed updates)
Its driving me mad, always trying to update them!
Thank you

A:Vista Update Error 800736B3 KB2803821

Please, there must be someone who can build a patch for this?

http://www.vistax64.com/windows-updates/303952-vista-update-error-800736b3-kb2803821.html
Relevancy 74.39%

Really struggling to fix Windows Vista update errors. There are 9 consistently failing important updates. I have followed all the scan and registry fix instructions but it seems to be making no difference.
Error number 800736B3 is shown then KB2803821. Please could someone help with a fix, I have attached the relevant screen shots and codes I think. (Added screen 1 and 2 showing better detail of the failed updates)
Thank you

A:Vista Update Error 800736B3 KB2803821

this forum is for windows 7 users, you will find the Vista forums here:
Vista Support Forums

http://www.sevenforums.com/windows-updates-activation/376315-vista-update-error-800736b3-kb2803821.html
Relevancy 74.39%

I have been stuck with this error for a bit and would like to get rid of the .NET 3.5.1 patch notices. CBS log attached for review.

Thanks for the help.

A:Windows Update: error 800736B3 with .NET 3.5.1 patch

Your CBS log did not come through:

http://www.sevenforums.com/windows-updates-activation/363882-windows-update-error-800736b3-net-3-5-1-patch.html
Relevancy 74.39%

Hello, I am having a small issue with Windows update. Windows 7 Home Premium, 64BIT OEM on HP Pavilion.

Window Update failing error code 800736B3

I have followed the SFC, update readiness, and clean boot procedures listed in the thread I linked above. I believe I have a SIMILAR issue (not the same).

Can anyone give me a light in the proper direction?

SFC found nothing, readiness tool ran and installed hotfix but did not fix issue. I also tried to install updates 1 at a time, to not avail, as well as the clean boot.

Based on my checksur log, I have the following:

Checking Package Watchlist
(f) CBS Watchlist Package Missing 0x80070002 Microsoft-Windows-Embedded-SKU-Foundation-Package~31bf3856ad364e35~amd64~~0.0.0.0 Microsoft-Windows-InternetExplorer-Package~31bf3856ad364e35~amd64~~10.2.9200.16521 Package registry presence failed, possibly an orphaned package on package watchlist

But I am unsure where to go or how to continue at this point. Any sugegstions?

http://www.sevenforums.com/windows-updates-activation/381411-update-error-800736b3-updates-failed.html
Relevancy 73.53%

I have been experiencing trouble with Windows Update for some time I have important updates that do no install correctly I have spent the better found: 80070005 / Windows 800736B3 - Update Error(s) portion of yesterday and today trying to figure out a couple of issues that I'v had and this is the only one remaining but I haven't been able to get it fixed I have tried the Windows Update Troubleshooter I have tried disabling security software I have tried System Update Readiness Tool for Windows for x -based Systems I have tried CMD sfc scannow did not find any integrity violations I have tried CMD CHKDSK C R as Windows Update - Error(s) found: 800736B3 / 80070005 well as Microsoft NET Framework Repair Tool I doubt this is important but just in Windows Update - Error(s) found: 800736B3 / 80070005 case I will note that days ago I cloned my Windows Update - Error(s) found: 800736B3 / 80070005 hard drive and am now running off of the new one However this issue existed long before the clone Error s found are- Code B Code The important updates are- Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Update for Windows for x -based Systems KB Update for Windows for x -based Systems KB Update for Windows for x -based Systems KB

A:Windows Update - Error(s) found: 800736B3 / 80070005

Try these:
 
For Code 800736B3: http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_update/windows-update-error-code-800736b3-failes-to/98573891-eead-4257-8bf2-1fbac3f2a96a
Skip the SFC step and System Readiness steps, and try the clean boot and safe mode options.
 
For Code 80070005: http://answers.microsoft.com/en-us/windows/forum/windows_other-windows_update/windows-update-error-code-80070005/3b00bcc8-f44a-4134-af68-e727605ad647
There are links to a number of troubleshooting steps and some automated fix-it tools.

http://www.bleepingcomputer.com/forums/t/538324/windows-update-errors-found-800736b3-80070005/
Relevancy 73.53%

Hello,

I seem to be running into a popular issue with Windows Update- 800736B3. WU is not completely broken, as it's still able to install updates to Security Essentials and non-system software (IE11, Office). All system updates, however, are failing. I've ran SURT and SFC scan, but both didn't report any outright errors. The logs should be attached to this post in the .zip

Any help would be greatly appreciated! Thank you in advance!

A:Windows Update constant failures, Error 800736B3

There are no errors in CheckSUR or the SFC scan, and nothing significant in the background CBS data.

Please post your C:\Windows\windowsupdate.log file - it may tell us where the problem lies.

http://www.sevenforums.com/windows-updates-activation/334595-windows-update-constant-failures-error-800736b3.html
Relevancy 73.53%

Hi I have Windows bit Lenovo ideapad that is not allowing system updates and Windows 9C57 800736B3 codes update Error This has been going on for awhile I do some research on the problem and attempt to fix it myself When I am unsuccessful I become frustrated so then I don't try again for several months Meanwhile Windows update Error codes 800736B3 and 9C57 my computer performance is getting worse and worse What I've tried so far Windows updater troubleshooter Service registration missing or corrupt-FIXED Problems installing recent updates-FIXED Starting computer in clean boot to try to install updates Temporarily disabling antivirus software AVG Antivirus Free Edition and trying to run the updates I've downloaded and tried to run the SURT not sure if it actually DID run SFC scan did not find any integrity violations I was unable to upload CBS zip file to this thread I tried a few times Connection was reset I have not yet tried to restore the registry because I'm not confident on how to do it although I did backup my computer on an external hard drive Please let me know if you require any additional information Any insight advice or help would be greatly appreciated Thanks

A:Windows update Error codes 800736B3 and 9C57

Please follow the WindowsUpdate Posting Instructions and post the requested data



If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for anumber of reasons)



Please also post the C:\Windows\windowsudpate.log file

http://www.sevenforums.com/windows-updates-activation/374550-windows-update-error-codes-800736b3-9c57.html
Relevancy 71.81%

Hi chaps this is my first time posting here but have used this website for help in the past I can usually fix my own problems but with these I see there is not straight answer I hope someone can help as this has defeated me I'll try to provide all information in the instructions thread but if you need anything else please ask Really hope you guys can help Error codes B E amp Installed SURT http support microsoft com kb 80070103 8007065E, error update 800736B3, codes Constant failure, Ran sfc scannow Quote C Users Administrator gt sfc scannow Beginning system scan This process will take some time Beginning verification phase of system scan Verification complete Windows Resource Protection did not find any integrity violations Rebooted Ran sfc scannow again Quote C Users Administrator gt sfc scannow Beginning system scan This process will take some time Beginning verification phase of system scan Verification complete Windows Resource Protection did not find any integrity violations Retried updates - Failed with above error codes still At this point I collected logs but I'm still stumped

A:Constant update failure, error codes 800736B3, 8007065E, 80070103

The error codes all relate to registry problems.
There's no errors in the posted logs - please post a couple of the CBSPersist logs, and the C:\Windows\windowsupdate.log file.

Please also list the KB numbers involved.

http://www.sevenforums.com/windows-updates-activation/347622-constant-update-failure-error-codes-800736b3-8007065e-80070103-a.html
Relevancy 71.81%

Windows Professional x SP GB RAM Intel Core i GB free space on SSD Office Samsung Galaxy Note KIES Hi My Windows x PC has been working codes: failing 800736B3, Windows Error Update 80070246 with 8007371B, fine until recently The trouble started with attempting to use my Samsung Galaxy Note and sync using Samsung's Windows Update failing with Error codes: 8007371B, 800736B3, 80070246 KIES using a USB connection It was a bit glitchy but I finally got the thing to sync But today it didnt want to know Windows Update failing with Error codes: 8007371B, 800736B3, 80070246 and kept saying that my phone had quot No SIM card installed quot which is not true as the phone was picking up a mobile phone signal fine In Task Manager I discovered a thing called TrustedInstaller exe which is persistently taking up to of my processor I looked online and discovered that it was the correct size and that it was something to do with Windows Updates So ran Windows Update and discovered that it wanted to install about patches This is odd because I run Windows Update every or weeks Error code B Error code B But when I ran Windows Update two things failed So I executed a Restore Point to days ago and I ran Window Update again Same problem except that now there are THREE error codes Error code B Error code B Error code So this time I followed the windows error code links and although there was nothing describing my error codes I ran Microsoft FixIt and did Windows Update again Still the same problem So then I download ms System Update Readiness Tool for Win x - KB CLUE When I try to do the Windows Update it doest seem to even download anything and gets stuck at quot Downloading updates KB total complete quot I'm thinking that something is must be wrong if it thinks it needs to download quot KB quot - Any thoughts J

A:Windows Update failing with Error codes: 8007371B, 800736B3, 80070246

Please post the CheckSUR.log and CheckSUR.persist.log files as attachements to your reply.

http://www.sevenforums.com/windows-updates-activation/258141-windows-update-failing-error-codes-8007371b-800736b3-80070246-a.html
Relevancy 67.94%

Hello all, I am posting for my father-in-law who is having difficulty with these windows updates.

The error code is 800736B3.

I downloaded and ran SURT a few times, each time it reported success however the error is still active and there are 10 updates pending on windows update.

i also scanned several times sfc /scannow and nothing exciting came up.

Uploading my CBS.zip continues to time out so here is a link to google drive with the file:
https://drive.google.com/file/d/0B7V...it?usp=sharing

Thanks in advance for your help.

A:Code 800736B3

Thought it was fixed but i have the same error code again!

http://www.sevenforums.com/windows-updates-activation/339073-code-800736b3.html
Relevancy 63.64%

Computer model: Panasonic Toughbook CF-31
OS: Windows 7 SP1
Processor: Intel Core i5-2540M CPU @ 2.60GHz 2.60GHz
RAM: 4 GB (3.89 GB usable)
System type: 64-bit

CBS Log
CBS.zip - Google Drive

I ran the SURT tool Windows6.1-KB947821-v34-x64.msu.
Ran fine, no problem.

Ran sfc /scannow
"Verification 100%"
"Windows Resource Protection could not perform the requested operation."

Also ran
Malwarebytes
JRT.exe
Adwcleaner
Hitmanpro_x64

I still get the "Windows Update Error, Error Code 80070643, Code 9C57"

A:Windows Update Error, Error Code 80070643, Code 9C57

Hi Qpuser,
lookin at your logs
couple of questions
Are you dual booting or have the OS on your D drive/partition.
can you also run, in following order

http://www.sysnative.com/niemiro/apps/SFCFix.exe
http://go.microsoft.com/fwlink/?LinkID=52012
and sfc /scannow

copy/paste the results please.

Roy

http://www.sevenforums.com/windows-updates-activation/402356-windows-update-error-error-code-80070643-code-9c57.html
Relevancy 61.92%

Attachment 290231
i having problem with this windows update

here is zip for CBSAttachment 290230


thanks!!!

A:windows update error (code 9c48 and code 9c57)

You haven't run the CheckSUR tool.

Pleasefollow the WindowsUpdate Posting Instructions and post the requested data

http://www.sevenforums.com/windows-updates-activation/308652-windows-update-error-code-9c48-code-9c57.html
Relevancy 61.92%

i keep getting these two error codes every time i try to update these programs through windows update: Update for Windows 7 (KB974332) Update for Windows 7 (KB974431) Update for Windows 7 (KB976098) Ive tried to download these updates from the download centre with out any success. please help me to fix this problem im using is windows 7 ultimate 32 bit

A:error Code 800F081F and Code 8024200D with window 7 update

Hello,Some third party programs can affect the Windows Update service. If you are running any third party applications such as Spyblocker, Internet or web accelerators (programs designed to boost the speed of the Internet connection), security or anti-virus programs (Norton, McAfee, etc.), I recommend you temporarily disable or uninstall them and then try accessing Windows Update later. If the problem still happens, try the following steps:Rename the Windows Update Softwaredistribution folder================================================1. Close all the open windows. 2. Click "Start", click "All programs", and click "Accessories". 3. Right-click "Command Prompt", and click "Run as administrator".4. In the "Administrator: Command Prompt" window, type in "net stop WuAuServ" (without the quotes) and press Enter.
Note: Please look at the cmd window and make sure it says that it was successfully stopped before we try to rename the folder. However, if it fails, please let me know before performing any further steps and include any error messages you may have received when it failed.
5. Click "Start", in the "Start Search" box, type in "%windir%" (without the quotes) and press Enter.6. In the opened folder, look for the folder named "SoftwareDistribution".7. Right-click on the folder, select "Rename" and type "SDold" (without the quotes) to rename this folder.8. Still in "Administrator: Command Prompt" window, type the command "net start WuAuServ" (without the quotes) in the opened window to restart the Windows Updates service. If you still cannot install updates, running system file checker and check if the problem is caused by the corrupted system files: System File Checker================1.  Click Start, click All Programs, click Accessories, right-click Command Prompt, and then click Run as administrator.   2.  Type the following command, and then press ENTER:  sfc  /scannow  The sfc  /scannow command scans all system files and will recover the corrupted ones.   3. Please restart the computer and recheck the original issue. In-place Upgrade============= 1. Insert the Windows 7 DVD in the computer's DVD drive. 2. Click Start and choose Computer.3. Please find the "setup.exe" file in the DVD-ROM and double click it.4. Click Install now. 5. When we are prompted to input the product key, please click Next without inputting any key. The setup wizard will prompt and ask if you agree to install Windows 7 without the key. Please choose to confirm.6. When you reach the "Which type of installation do you want" screen, click Upgrade to upgrade the system files of Windows 7 Note: While performing the In-place Upgrade, the system will restart automatically (several times) to merge the files and programs. Please leave the computer alone and do not configure it until In-place Upgrade is completed. The system will start Windows 7 once it is upgraded. Thomas77

https://social.technet.microsoft.com/Forums/en-US/5db335c5-b193-48c1-a8bf-b6b7d665b80a/error-code-800f081f-and-code-8024200d-with-window-7-update?forum=w7itprogeneral
Relevancy 61.06%

I am trying to assist a friend in repairing their windows update problems. I've made progress- but I have 5 Important updates that refuse to install...

IE11 - 9C59
KB2937610 - 800736B3
KB2972211 - 800736B3
KB3032323 - 800736B3
KB2791765 - 800736B3

the SURT was run- and got most of the updates to work other than the ones shown above.
sfc /scannow said all files were fine.

SURT has been run 4 or so times- it's not shown any repairs after the first run... as I would expect.

I've looked through the log files, but I am not really sure what I am looking for to indicate what the problem is.

I have attempted to attach the CBS.Zip file but I got a 404 error each time I clicked "Upload". This must be due to the size of the file. Here is a onedrive link to the zip file.

A:Windows Update: 800736B3 and 9C59

The upload is 8 times larger than the forum's 8MB size limit on Zip/RAR files - which is why it wouldn't upload here

Your first run of CheckSUR had the following summary...





Quote:
Summary:
Seconds executed: 1046
Found 31 errors
CSI C Mark Deployment Missing Total count: 31


The next was clear of errors - how did you go about fixing the C Mark errors, since CheckSUR wasn't able to do it?

The CBS.log file shows the expected errors for the updates (apart from the IE one)
e.g.


Code:
2015-07-10 12:40:38, Info CBS Appl: Evaluating package applicability for package Package_2_for_KB2753842~31bf3856ad364e35~amd64~~6.1.2.0, applicable state: Installed
2015-07-10 12:40:38, Info CBS Plan: Package: Package_2_for_KB2753842~31bf3856ad364e35~amd64~~6.1.2.0, current: Installed, pending: Default, start: Installed, applicable: Installed, targeted: Installed, limit: Installed
2015-07-10 12:40:38, Error CSI [email protected]/7/10:16:40:38.687 (F) d:\win7sp1_gdr\base\wcp\componentstore\csd_core.cpp(616): Error STATUS_SXS_ASSEMBLY_NOT_FOUND originated in function CCSDirect::GetDeploymentClosureStatus expression: (null)
[gle=0x80004005]
2015-07-10 12:40:38, Error CSI 0000002d (F) HRESULT_FROM_WIN32(ERROR_SXS_ASSEMBLY_NOT_FOUND) #630188# from Windows::ServicingAPI::CCSITransactionAnalysis_ICSIInventory::GetDeploymentInformation(flags = 0, class = ICSIINVENTORY_GET_DEPLOYMENT_INFORMATION_CLASS_CLOSURE (1), information = {dwFlags=00000000})
[gle=0x800736b3]
2015-07-10 12:40:38, Info CBS Failed to call GetDeploymentInformation on deployment: amd64_79cc1bf455dd56703d940a275924c112_31bf3856ad364e35_6.1.7601.22195_none_015b15d745c7b295 [HRESULT = 0x800736b3 - ERROR_SXS_ASSEMBLY_NOT_FOUND]
2015-07-10 12:40:38, Info CBS Failed to get component state. [HRESULT = 0x800736b3 - ERROR_SXS_ASSEMBLY_NOT_FOUND]
2015-07-10 12:40:38, Info CBS Failed to get current state of the deployment [HRESULT = 0x800736b3 - ERROR_SXS_ASSEMBLY_NOT_FOUND]
2015-07-10 12:40:38, Info CBS Failed to get Transaction State for package: Package_2_for_KB2753842~31bf3856ad364e35~amd64~~6.1.2.0, update: 2753842-3_neutral_LDR [HRESULT = 0x800736b3 - ERROR_SXS_ASSEMBLY_NOT_FOUND]
2015-07-10 12:40:38, Info CBS Failed to get current state. [HRESULT = 0x800736b3 - ERROR_SXS_ASSEMBLY_NOT_FOUND]
2015-07-10 12:40:38, Info CBS Failed to populate updates for package: Package_2_for_KB2753842~31bf3856ad364e35~amd64~~6.1.2.0 [HRESULT = 0x800736b3 - ERROR_SXS_ASSEMBLY_NOT_FOUND]
2015-07-10 12:40:38, Info CBS Failed to add package to execution for package:Package_2_for_KB2753842~31bf3856ad364e35~amd64~~6.1.2.0 [HRESULT = 0x800736b3 - ERROR_SXS_ASSEMBLY_NOT_FOUND]
2015-07-10 12:40:38, Info CBS Failed to process component watch list. [HRESULT = 0x800736b3 - ERROR_SXS_ASSEMBLY_NOT_FOUND]
2015-07-10 12:40:38, Info CSI [email protected]/7/10:16:40:38.762 CSI Transaction @0x116ada0 destroyed
2015-07-10 12:40:38, Info CBS Perf: InstallUninstallChain complete.
This looks to me as if the install is actually stuck in a pending state, and you need to roll it back...


This is the command to run when booted offline at a Repair Environment command prompt

dism.exe /image:C:\ /cleanup-image /revertpendingactions

This is supposed to revert all pended updates, and hopefully allow the system to start again - assuming it works, do another Check for Updates before attempting to install the updates again.

http://www.sevenforums.com/windows-updates-activation/375172-windows-update-800736b3-9c59.html
Relevancy 60.2%

I am unable to install Windows updates as I get an error " Code 64C : windows update encountered an unknown error..
Same with Code 66A
Please help.
I am unable to also install Windows Live essentials
I am using Windows 7
Greg

https://social.technet.microsoft.com/Forums/en-US/c82eb8bf-4ea1-43ff-ab49-272ea5eb279c/windows-update-error-code-64c-code-66a?forum=w7itprogeneral
Relevancy 59.34%

Hi,

I tried a lot of things trying to resolve this issue but nothing worked.
I finally follow the procedure described on this forum, in the hope someone here can help.

I activated the Administrateur account (my system is in French) and ran the CheckSUR and Windows Update from this account as otherwise I can't access the CBS log file.
I joined the requested files,
Thank you by advance.
Alain

A:Windows 7/64 Home Premium Update errors 9C59 & 800736B3

Your SFC scan was clear - but the background CBS data shows some severe problems.
PLease run the CheckSUR tool, and post the results...

Please download and save the CheckSUR tool from http://support.microsoft.com/kb/947821
(you'll need to look in the details for Windows 7, downloading from the Microsoft Download Center)

Run it - The tool can take anywhere from 5 mins to a couple of hours to run (or 'Install') depending on how much it has to do, and may exit silently - it may appear to freeze for most of that time, but be patient.
The result is logged in the C:\Windows\Logs\CBS\CheckSUR.log file - and an archive …\checksur.persist.log file

Then zip the CheckSUR.log and upload it to your reply.

http://www.sevenforums.com/windows-updates-activation/367124-windows-7-64-home-premium-update-errors-9c59-800736b3.html
Relevancy 58.91%

Error(s) found:
"Code 80070663 windows updater encountered an known error" when I
tried to update microsoft .net framework 3.5 family update (kb959209) x86 for windows vista 32 bit.

What should I do? I have tried to install this update many times but still getting same error. Thanks in advance for help.

Bela

A:error code 80070663 when I tried to update microsoft .net framework 3.5 family update

bela2020:

You didn't say, so I'll ask, have you done the net3.5 Service Pack 1 update?

http://www.vistax64.com/general-discussion/241823-error-code-80070663-when-i-tried-update-microsoft-net-framework-3-5-family-update.html
Relevancy 58.91%

Hi everybody

I get windows update error code 2 on installing Security Update for Microsoft .NET Framework 4.5, 4.5.1 and 4.5.2 on Windows 7, Vista, Server 2008, Server 2008 R2 x64 (KB2978128)
I have also some other errors installing Internet Explorer 11.

I have used "sfc /scannow" command but it didn't find any integrity violations. the CBS log is attached.

I have also used SUR and the log file can be found attached to this post.

Any help is appreciated.

A:Windows update error code 2 on installing security update .NETF 4.52

Not as bad as I thought from the file size of the CheckSUR log...


Code:
Summary:
Seconds executed: 626
Found 40 errors
CSI Manifest All Zeros Total count: 40
Unavailable repair files:
winsxs\manifests\amd64_microsoft-windows-ie-ieshims_31bf3856ad364e35_10.2.9200.20916_none_ae6c710c2475d6dd.manifest
winsxs\manifests\amd64_microsoft-windows-ie-ieshims_31bf3856ad364e35_10.2.9200.16798_none_c5578c400ab73d40.manifest
winsxs\manifests\amd64_microsoft-windows-scripting-jscript9_31bf3856ad364e35_10.2.9200.20916_none_ab08cdc647ee4ac0.manifest
winsxs\manifests\amd64_microsoft-windows-ie-extcompat_31bf3856ad364e35_10.2.9200.20916_none_a38eed1960d6da24.manifest
winsxs\manifests\amd64_microsoft-windows-i..ersandsecurityzones_31bf3856ad364e35_10.2.9200.16798_none_32ad7426474825c0.manifest
winsxs\manifests\amd64_microsoft-windows-ie-ratings_31bf3856ad364e35_10.2.9200.16798_none_455c9a9ecd397534.manifest
winsxs\manifests\amd64_microsoft-windows-ieinstal_31bf3856ad364e35_10.2.9200.16798_none_66663569022097ee.manifest
winsxs\manifests\amd64_microsoft-windows-ie-extcompat_31bf3856ad364e35_10.2.9200.16798_none_ba7a084d47184087.manifest
winsxs\manifests\amd64_microsoft-windows-js-debuggeride_31bf3856ad364e35_10.2.9200.16798_none_b8c293a66f3311dc.manifest
winsxs\manifests\amd64_microsoft-windows-ie-runtimeutilities_31bf3856ad364e35_10.2.9200.20916_none_ae82eb7016c1044d.manifest
winsxs\manifests\amd64_microsoft-windows-ie-lowreg_31bf3856ad364e35_10.2.9200.20916_none_0f2b73186e1db6ad.manifest
winsxs\manifests\amd64_microsoft-windows-scripting-jscript_31bf3856ad364e35_10.2.9200.20916_none_e9bf29ad81612b17.manifest
winsxs\manifests\amd64_microsoft-windows-ie-gc-registeriepkeys_31bf3856ad364e35_10.2.9200.16798_none_a5b33267944d950c.manifest
winsxs\manifests\amd64_microsoft-windows-ie-sysprep_31bf3856ad364e35_10.2.9200.20916_none_82715ae744395a3d.manifest
winsxs\manifests\amd64_microsoft-windows-i..tocolimplementation_31bf3856ad364e35_10.2.9200.16798_none_7fb34fc812514c53.manifest
winsxs\manifests\amd64_microsoft-windows-ie-sysprep_31bf3856ad364e35_10.2.9200.16798_none_995c761b2a7ac0a0.manifest
winsxs\manifests\amd64_microsoft-windows-ie-htmlrendering_31bf3856ad364e35_10.2.9200.16798_none_910d6ee692a7b589.manifest
winsxs\manifests\amd64_microsoft-windows-ie-runtimeutilities_31bf3856ad364e35_10.2.9200.16798_none_c56e06a3fd026ab0.manifest
winsxs\manifests\amd64_microsoft-windows-ie-lowreg_31bf3856ad364e35_10.2.9200.16798_none_26168e4c545f1d10.manifest
winsxs\manifests\amd64_microsoft-windows-i..etexplorer-optional_31bf3856ad364e35_10.2.9200.16798_none_1680b8a41e440241.manifest
winsxs\manifests\amd64_microsoft-windows-js-debuggeride_31bf3856ad364e35_10.2.9200.20916_none_a1d7787288f1ab79.manifest
winsxs\manifests\amd64_microsoft-windows-ie-setup-support_31bf3856ad364e35_10.2.9200.16798_none_439b116ecef783db.manifest
winsxs\manifests\amd64_microsoft-windows-ie-gc-registeriepkeys_31bf3856ad364e35_10.2.9200.20916_none_8ec81733ae0c2ea9.manifest
winsxs\manifests\amd64_microsoft-windows-ie-versioninfo_31bf3856ad364e35_10.2.9200.20916_none_6605203fbf36f2d9.manifest
winsxs\manifests\amd64_microsoft-windows-ie-ratings_31bf3856ad364e35_10.2.9200.20916_none_2e717f6ae6f80ed1.manifest
winsxs\manifests\amd64_microsoft-windows-scripting-jscript9_31bf3856ad364e35_10.2.9200.16798_none_c1f3e8fa2e2fb123.manifest
winsxs\manifests\amd64_microsoft-windows-ie-pdm-configuration_31bf3856ad364e35_10.2.9200.20916_none_b72e2fb5a0a8f7b3.manifest
winsxs\manifests\amd64_microsoft-windows-ie-vgx_31bf3856ad364e35_10.2.9200.16798_none_6b016db5593931ef.manifest
winsxs\manifests\amd64_microsoft-windows-ie-setup-support_31bf3856ad364e35_10.2.9200.20916_none_2caff63ae8b61d78.manifest
winsxs\manifests\amd64_microsoft-windows-ie-pdm-configuration_31bf3856ad364e35_10.2.9200.16798_none_ce194ae986ea5e16.manifest
winsxs\manifests\amd64_microsoft-windows-i..etexplorer-optional_31bf3856ad364e35_10.2.9200.20916_none_ff959d7038029bde.manifest
winsxs\manifests\amd6... Read more

http://www.sevenforums.com/windows-updates-activation/365236-windows-update-error-code-2-installing-security-update-netf-4-52-a.html
Relevancy 58.91%

Hey all,

So I am currently reinstalling Windows on my dad's old laptop after the hard drive decided up die on us, and I stumbled on a problem that's a bit too hard for me to fix.

Namely, I am completely unable to install any Windows Update. Not even MSE will install.

I tried running SURT, but got error code 0x8000247
I also tried running SFC /SCANNOW, it ran the verification fase until 98% and then stated that there where unfixable problems.

The displayed error codes are:
In WU: "8024A000"
In SURT: "0x8000247"
Whilst installing MSE: "0x80070643".

Attached you will find CBS.log and MSINFO with my system specs.
Cheers and many thanks in advance,
Nommy

CBS.log MSINFO32.nfo

A:Windows Update error code 8024A000; unable to install any update.

That's very reminiscent of similar errors in Win7 - and I wouldn't be surprised to see it being non-genuine.
Please post an MGADiag report BEFORE doing the below potential fixes.

This may simply be caused by a bad set of Intel Storage Matrix Technology drivers -

Installing the Intel Drivers
try downloading and installing them from here -
https://downloadcenter.intel.com/Det...&DwnldID=17882

(IATA89ENU.exe)

Once complete, please reboot twice, then post another MGADiag report.


If nothing has changed, try this...

Please run the following commands in an Elevated Command Prompt

NET STOP CRYPTSVC
REN C:\WINDOWS\SYSTEM32\CATROOT2 CATROOT2OLD
NET START CRYPTSVC

once complete, leave the system alone for at least an hour to rebuild the database, then reboot, and run another MGADiag report and post the results.

If neither of them work, we'll re-evaluate.

http://www.vistax64.com/windows-updates/302946-windows-update-error-code-8024a000-unable-install-any-update.html
Relevancy 58.91%

Here's will 800B0100 not Code details: update. Important Error Update Vista another tricky one This important security update will not update It is only Kb Microsoft says it is caused by a virus problem I have Norton installed Norton say it is Vista Important Update will not update. Error details: Code 800B0100 not a Vista Important Update will not update. Error details: Code 800B0100 virus Microsoft say pay us to fix it I say I can't afford to pay that for something when I have no way of knowing exactly what the problem really is This has been going on since November All the other updates are installed immediately but not this one Security Update for Microsoft NET Framework SP on Windows Vista SP and Windows Server SP x KB Installation date PM Installation status Failed Error details Code B Update type Important A security issue has Vista Important Update will not update. Error details: Code 800B0100 been identified in a Microsoft software product that could affect your system You can help protect your system by installing this update from Microsoft For a complete listing of the issues that are included in this update see the associated Microsoft Knowledge Base article After you install this update you may have to restart your system More information MS - Description of the security update for the NET Framework Service Pack for Windows Vista Service Pack and Windows Server Service Pack October Just noticed this more recent one failed to update - Security Update for Windows Vista KB Installation date PM Installation status Failed Error details Code F Update type Important A security issue has been identified in a Microsoft software product that could affect your system You can help protect your system by installing this update from Microsoft For a complete listing of the issues that are included in this update see the associated Microsoft Knowledge Base article After you install this update you may have to restart your system More information MS - Description of the security update for USB drivers October Help and Support Microsoft Support Any ideas please

A:Vista Important Update will not update. Error details: Code 800B0100

That error is not caused by a virus, it is caused by a file corruption
The readiness tool can correct the problem in many situations
What is the System Update Readiness Tool? - Windows Help

http://www.vistax64.com/windows-updates/303686-vista-important-update-will-not-update-error-details-code-800b0100.html
Relevancy 58.91%

I'm having no luck installing KB2977629 (Cumulative Security Update IE11). I repeatedly get the error 8007371B.

SURT installs with no errors. SFC /SCANNOW runs with no errors. I am uploading the requested screenshots and ZIP file.

Any help would be appreciated.

Thank you!!!!

PS- well, I WAS uploading. My screencaptures upload great, but my CBS.zip fails with "Server error 500".
My zip file is 9.6mb-- over the 8mb limit. What can I delete from the directory to get under the 8mb limit?


Attachment 333111
Attachment 333112

A:Update Error Code 80073712-Cumulative Security Update IE11, Win 7(64)

I've found a way to get the CBS zip uploaded. I divided it into 4 parts. All of the CBS folder's files are included. Sorry I didn't see this earlier.


Attachment 333122
Attachment 333123
Attachment 333124
Attachment 333121

http://www.sevenforums.com/windows-updates-activation/345380-update-error-code-80073712-cumulative-security-update-ie11-win-7-64-a.html
Relevancy 58.91%

Hello,

I recieve error C80003FA whenever I do a Windows Update run. It doesn't get past the stage of checking for updates.

I've tried several fixes including:
- Waiting 15 minutes and running Windows Update again.
- Letting Windows Update run on its own schedule.
- SFC /Scannow
- Renaming the Catroot2 Folder.
- Running 3 different Fixit tools.
- Clean windows install.

After each and every one of those fixes I've tried windows update and I still get error C80003FA.

SFC Scannow has previously said no errors, but the last run through it said there were unfixable errors. I've got the log, though for brevity's sake I will keep it until someone asks for it.

Any ideas?

Thanks.

A:Windows Update fails in Update Check. Error code C80003FA.

Clean windows install doesn't fix it? You must be blocked, maybe your firewall???

http://www.sevenforums.com/windows-updates-activation/251423-windows-update-fails-update-check-error-code-c80003fa.html
Relevancy 58.48%

My Windows Update has been failing to update for error 800F081F Windows to fails update, code Update a while now and I can't seem to find the solution Here's the run-down of what happens step by step Launch an update scan for Windows Update It scans for a few seconds then says Quote Install new Windows Update software To check for updates you must first install an update for Windows Update Once I click Windows Update fails to update, error code 800F081F Install it begins to quot Install and Update quot but then immediately returns to quot Checking for Updates quot The next box I see says Quote Windows could not search for new updates An error occurred while checking for new updates for your computer Error s found Code F F This happens every time I've attempted to update After looking up the error code I found the main Windows site that gave me the following explaination If you receive Windows Update error F F it means that Windows Update or Microsoft Update cannot determine the cryptographic service provider or a file Windows Update requires named catalog store is corrupted I've looked through multiple Windows forums and How-To's and have tried all the fixes I found SURT sfc scannow the standalone download for WU Windows Update Diagnostic multiple malware scans and Microsoft Fixit Ultimately I always get the same error code F F I should also say this problem has been here for a few months now and it's becoming more worrisome as more time passes The longer I wait to get this fixed the more I fear I will be hurting my computer Any and all help is greatly appreciated and I will do my best to cooperate with any instructions or requests Thank you Mookey

A:Windows Update fails to update, error code 800F081F

Hi Mookeylee & welcome to Sevenforums.

Please follow Windows Update Posting Instructions

We need to see the logs to determine the cause of the error.

Worst case scenario, and last resort, repair install windows 7. No big deal I just did 2 yesterday win7x64 Home Premium. Brink posted a great tutorial Repair Install.

http://www.sevenforums.com/windows-updates-activation/384786-windows-update-fails-update-error-code-800f081f.html
Relevancy 58.48%

Hello,
First, excuse my english, I'm trying my best.

I get error C80003FA whenever I do a Windows Update run.

I did the Windows Update Posting instructions. When I did the SURT installation, it didn't finish and I had to reboot the PC. Then it work.

I've tried sfc /scannow several times before with different results: sometimes finished with no errors, sometimes finish with unfixable errors and sometimes didn't finish at all.

I uploaded the CBS.zip

Hope you can help me, thanks.

A:Windows Update doesn't update. Error code C80003FA

There are no errors in any of the posted logs
Please post the C:\WIndows\windowsupdate.log file.

Please also post the event logs...

Open Event Viewer
click on the Windows logs entry in the left pane to expand it.
Now click on the Application entry - wait while it loads.
Click on 'File' in the menu bar and select Save...

Save the file as Appevt.evtx

Repeat for the System log

then zip both, and upload them.

http://www.sevenforums.com/windows-updates-activation/374917-windows-update-doesnt-update-error-code-c80003fa.html
Relevancy 58.05%

After buying a new hard drive and reimaging thumb drive from Dell, I installed Windows 7 Ultimate on a Dell M6400 Precision Laptop. I have everything working except Windows Update will not Update. It has not updated once since the install. Windows Tech
support has not been able to resolve the issue, even with remote assistance. I get the Error Code 0x80070003 after running the Windows Update Diagnostic Tool. Does anyone know how to fix this?

https://social.technet.microsoft.com/Forums/en-US/dfaac767-7d89-4254-8ce7-368b149f2945/error-code-0x80070003-windows-update-will-not-update?forum=w7itproinstall
Relevancy 58.05%

Been using Google and such for a couple months messing with it but cant get update to work. My girlfriend updated from Vista a while ago and I cant crack this! I have done all the differect things I could find from Microsoft to no avail. The fixit program finds something and says its fixed but still doesnt work.

Any ideas you all could give would be great! Thanks.

A:Update for Windows Update Error Code 800700B7

Hello bobo and welcome am no expert mate but take a look at this Windows update KB2532531 gets error code 800700B7 - Microsoft Community

http://www.sevenforums.com/windows-updates-activation/278382-update-windows-update-error-code-800700b7.html
Relevancy 58.05%

I didn't see any posts about this, so I hope I am not double posting.

After removing a drive load of viruses, I am still not able to update Windows Vista to Service Pack 1. I have even tried to create a new admin user account in hopes that this would work, but no go. I tried running sfc.exe / scannow from the CMD and it did report that it was unable to repair wextract.exe. Also, the file reportingevents.txt located in %system root%\windows\softwaredistribution\reportingevents.txt lists "Windows Update Client failed to detect with error 0x80070490".
Although, I think Windows Defender can update. I need to take a break.

Acer Extensa 4620-4605
Windows Vista 32-bit Home Premium

http://www.bleepingcomputer.com/forums/t/219545/windows-update-will-not-update-error-code-80070490/
Relevancy 58.05%

I've run the System file checker and that didn't find anything, I fully reset the windows update service to where it says I've never updated. I've tried the Readniss update tool and I'm repairing .Net now. Any suggestions? Whats the next step?

A:Tried many things, still error 800736B3

Windows Update Posting Instructions

http://www.sevenforums.com/windows-updates-activation/282189-tried-many-things-still-error-800736b3.html
Relevancy 58.05%

hello

i'm stuck with these 4 updates. i've tried fixit, the big 500mo windows update correction program, manual installation etc nothing works
i also have huge log files in my cbs folder (almost 5Go) . the cbs.log is almost 1Go

here are the updates :
kb2977629
kb2972211
kb2973112
kb2982378

thanks you for your help !

A:error 800736B3 on 4 updates

Please follow the Windows Update Posting Instructions and post the requested data
If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

http://www.sevenforums.com/windows-updates-activation/346737-error-800736b3-4-updates.html
Relevancy 58.05%

Hello I've been pulling my hair out trying to install SP for win for some time and have had no luck or useful support from Microsoft on the issue I've 800736B3 Error 7 SP1 Windows run the CheckSUR multiple times I've posted the log below I've run the sfc program and when it finishes is says quot Windows Resource Protection did not find any integrity violations quot I've posted Windows 7 SP1 Error 800736B3 the CBS log below I've uninstalled AVG and tried to run the update same error I've run all the fixes that could be connected to the error No Help I've downloaded the SP package as a standalone installation same error I've tried to run a repair installation from the Win disk no improvement So here I am asking if anyone has an answer for me I have some software that will only run with SP installed so I need to figure this out and I would rather not do a fresh install if possible Thanks in advance for any help you can provide

A:Windows 7 SP1 Error 800736B3

Press the Windows Flag key and the Pause key and post a picture using this tutorial by Brink:

Screenshots and Files - Upload and Post in Seven Forums

http://www.sevenforums.com/windows-updates-activation/367395-windows-7-sp1-error-800736b3.html
Relevancy 57.19%

I am running Win Pro SP x on my Macbook Air using Parallels One VM is working perfectly and is accepting all updates the other suddenly stopped accepting updates starting July I have checked Seven Forums Microsoft and Googled and tried all the suggested things NoelDP seems to be successful at helping folks resolve their issues I've run SURT a number of time in different combinations restart no restart SFC scan did not return any problems I cleared the updates and the downloaded files The error codes are all B there were a few others that have disappeared since I tried the different methods to resolve see screen shot from My CBS zip file is MB and to big to upload I will - Error resistant to solution 800736B3 attach a log file that I copied I noticed that some of the KB in the list of pending updates are for x but that does not seem completely unusual I manually downloaded and installed and X and it failed too KB There is a screenshot of update history included I will gladly post Error 800736B3 - resistant to solution all the links that I used if desired Your help is appreciated because I must have spent hours configuring this VM of Windows before it started failing the updates

A:Error 800736B3 - resistant to solution

I have uncovered something that may help with the issue.
Using https://support.microsoft.com/en-us/kb/827218 the automatic detection says I have 32-bit OS but when I check manually it displays that I am using a 64-bit system. See attached images

http://www.sevenforums.com/windows-updates-activation/376928-error-800736b3-resistant-solution.html
Relevancy 57.19%

Hello!

I have tried several days to run the KB3000869 update to my Win 7 laptop without success. It always fails and the error code is every time 800736B3.

I have run ccleaner, sfc /scannow, SURT and several other tools but none of them has helped.

My CBS logs can be found here:
https://www.sendspace.com/file/n2sh16

Can you help me?

Regards,

Jari

A:Error 800736B3 when updating KB3000869 to my Win 7

CheckSUR shows the following problems...

Code:
Unavailable repair files:
servicing\packages\Package_for_KB3000869~31bf3856ad364e35~amd64~~6.1.1.0.mum
servicing\packages\Package_for_KB3000869~31bf3856ad364e35~amd64~~6.1.1.0.cat
I can find no SFC results - but your CBS.log is a mass of errors...

Code:
2014-11-07 22:54:49, Info CBS Appl: Selfupdate, Component: x86_microsoft-windows-packager_31bf3856ad364e35_0.0.0.0_none_11ea043118e85a4e (6.1.7601.22809), elevation:3, lower version revision holder: 6.1.7601.18601
2014-11-07 22:54:49, Info CBS Setting ExecuteState key to: CbsExecuteStateInitiateRollback | CbsExecuteStateFlagAdvancedInstallersFailed
2014-11-07 22:54:49, Info CSI 0000000e Performing 1 operations; 1 are not lock/unlock and follow:
Install (5): flags: 0 tlc: [463c680c5e60b54714ba3d0d41563004, Version = 6.1.7601.18601, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral]) ref: ( flgs: 00000000 guid: {d16d444c-56d8-11d5-882d-0080c847b195} name: [l:154{77}]"Package_1_for_KB3000869~31bf3856ad364e35~amd64~~6.1.1.0.3000869-2_neutral_GDR" ncdata: [l:4{2}]"17") thumbprint: (null)
2014-11-07 22:54:49, Error CSI [email protected]/11/7:20:54:49.743 (F) d:\win7sp1_gdr\base\wcp\componentstore\storelayout.cpp(8701): Error STATUS_SXS_ASSEMBLY_NOT_FOUND originated in function ComponentStore::CRawStoreLayout::QueryComponentUnstagedFiles expression: (null)
[gle=0x80004005]
2014-11-07 22:54:52, Error CSI 00000010 (F) STATUS_SXS_ASSEMBLY_NOT_FOUND #53126# from CCSDirectTransaction::PerformChangeAnalysis(...)[gle=0xd0150004]
2014-11-07 22:54:52, Error CSI 00000011 (F) STATUS_SXS_ASSEMBLY_NOT_FOUND #53125# from CCSDirectTransaction::PrepareForCommit(...)[gle=0xd0150004]
2014-11-07 22:54:52, Error CSI 00000012 (F) STATUS_SXS_ASSEMBLY_NOT_FOUND #53124# from CCSDirectTransaction::ExamineTransaction(...)[gle=0xd0150004]
2014-11-07 22:54:52, Error CSI 00000013 (F) STATUS_SXS_ASSEMBLY_NOT_FOUND #53123# from CCSDirectTransaction_IRtlTransaction::ExamineTransaction(...)[gle=0xd0150004]
2014-11-07 22:54:52, Error CSI [email protected]/11/7:20:54:52.380 (F) d:\win7sp1_gdr\base\wcp\componentstore\storelayout.cpp(8701): Error STATUS_SXS_ASSEMBLY_NOT_FOUND originated in function ComponentStore::CRawStoreLayout::QueryComponentUnstagedFiles expression: (null)
[gle=0x80004005]
We'll see what effect fixing the CheckSUR errors has - I'll post a fix soon.

http://www.sevenforums.com/windows-updates-activation/351549-error-800736b3-when-updating-kb3000869-my-win-7-a.html
Relevancy 57.19%

Can anyone help me with these errors? I have had this error for about a day and have found know help on Google so please if you can help in anyway, thanks in advance!

A:How to fix the error codes 80072EFE and 800736B3

The 80072EFE error is simply a bad internet connection - although that can be due either to physical problems or software interferences by malware, firewalls, etc.

The 800736B3 error is somewhat different.

Please follow the Windows Update Posting Instructions and post the requested data.

http://www.sevenforums.com/windows-updates-activation/290374-how-fix-error-codes-80072efe-800736b3.html
Relevancy 56.76%

Hello,

My Windows 7 x64 Home Premium updates are failing with error code 800736B3

I've tried the "Update Readiness Tool for Windows 7 x64" and they still fail.

I've tried SFC /SCANNOW and they still fail.

Please Help!!

Thank You!

Rob S.
 

A:Windows 7 Updates Failing Error 800736B3

Which update is failing
 

https://forums.techguy.org/threads/windows-7-updates-failing-error-800736b3.1132460/
Relevancy 56.76%

Hello,

My Windows 7 x64 Home Premium updates are failing with error code 800736B3

I've tried the "Update Readiness Tool for Windows 7 x64" and they still fail.

I've tried SFC /SCANNOW and they still fail.

Please Help!!

Thank You!

Rob S.

A:Windows 7 Updates Failing Error 800736B3

Hello Rob,

Lets run SURT to see if it gives an indication of a corruption:

Download and run System Update Readiness Tool (SURT)
Please go Here and download the System Update Readiness Tool (SURT). Save this file to your desktop
Go to your desktop and run KB947821
When the SURT finishes installing, Please continue.
SFC /SCANNOW

Click on the button. Inside the search box type in CMD
Right click on CMD => Choose Run as Administrator
Inside the Command Prompt windows copy and paste the following command SFC /SCANNOW
Please wait for this to Finish before continuing with the rest of the steps.

Export CBS folder
Click the Start button then click Computer.
Double-click on the C: drive, under the Hard Disk Drives category, and then scroll down to, and double click on the Windows folder.
Find and double click on the Logs folder.
Right-click on the CBS folder, and select Copy.
Go back to your Desktop, right-click on it, and select Paste. You should now see a copy of the CBS folder appear on your Desktop called CBS.
Right-click on this new folder, and navigate through Send to, and select Compressed (zipped) folder.
A new file, also called CBS (CBS.zip), but this time with a different icon, will be created.
Attach this to your next post please.
Please Note:: if the file is too big to upload to you next please post please upload via Dropbox or ge.tt

http://www.techsupportforum.com/forums/f217/windows-7-updates-failing-error-800736b3-886089.html
Relevancy 56.33%

I was given an HP Compaq Presario C that was headed for the Update 80070017 Error Windows unknown an encountered / error code garbage because it would not connect to the internet After running several scans ESET online scanner came up clean Installed Microsoft Security Essentials and installed SP and can't get it to install SP I keep getting error code Windows Update encountered an unknown error I would prefer to reformat but Recovery Manager restarts back into Windows and I Error code 80070017 / Windows Update encountered an unknown error have no disks Can provide a long list of what has been done if needed including WU Modules Normal Mode and WU Components fixes Permissions point in every which way but the correct way Any help would be much appreciated Free space is presently GB of GB on C Drive started out with GB's free space and GB free of GB on Presario RP D Specs as follows Vista Home Basic Intel Error code 80070017 / Windows Update encountered an unknown error R Celeron R MCPU GHz GHz MB RAM -bit OS Denied access to the CBS folder itself though can access CheckSUR log which I am including Error code 80070017 / Windows Update encountered an unknown error along with sfcdetails Checking System Update Readiness Binary Version Package Version - - Checking Deployment Packages Checking Package Manifests and catalogs Checking package watchlist Checking component watchlist Checking packages Checking component store Summary Seconds executed No errors detected Checking System Update Readiness Binary Version Package Version - - Checking Windows Servicing Packages Checking Package Manifests and Catalogs Checking Package Watchlist Checking Component Watchlist Checking Packages Checking Component Store f CSI ReadFile Failed x winsxs x microsoft-windows-servicingstack bf ad e none f cca f wcp dll x microsoft-windows-servicingstack bf ad e none f cca f f CSI Payload File Corrupt x wcp dll x microsoft-windows-servicingstack bf ad e none f cca f Summary Seconds executed Found errors CSI ReadFile Failed Total count CSI Payload File Corrupt Total count Checking System Update Readiness Binary Version Package Version - - Checking Deployment Packages Checking Package Manifests and catalogs Checking package watchlist Checking component watchlist Checking packages Checking component store Summary Seconds executed No errors detected Checking System Update Readiness Binary Version Package Version - - Checking Windows Servicing Packages Checking Package Manifests and Catalogs Checking Package Watchlist Checking Component Watchlist Checking Packages Checking Component Store f CSI ReadFile Failed x winsxs x microsoft-windows-servicingstack bf ad e none f cca f wcp dll x microsoft-windows-servicingstack bf ad e none f cca f f CSI Payload File Corrupt x wcp dll x microsoft-windows-servicingstack bf ad e none f cca f Summary Seconds executed Found errors CSI ReadFile Failed Total count CSI Payload File Corrupt Total count - - Info CSI SR Verifying x components - - Info CSI SR Beginning Verify and Repair transaction - - Info CSI SR Verify complete - - Info CSI a SR Verifying x components - - Info CSI b SR Beginning Verify and Repair transaction - - Info CSI d SR Verify complete - - Info CSI e SR Verifying x components - - Info CSI f SR Beginning Verify and Repair transaction - - Info CSI SR Verify complete - - Info CSI SR Verifying x components - - Info CSI SR Beginning Verify and Repair transaction - - Info CSI SR Verify complete - - Info CSI SR Verifying x components - - Info CSI SR Beginning Verify and Repair transaction - - Info CSI SR Verify complete - - Info CSI a SR Verifying x components - - Info CSI b SR Beginning Verify and Repair transaction - - Info CSI d SR Verify complete - - Info CSI e SR Verifying x components - - Info CSI f SR Beginning Verify and Repair transaction - - Info CSI SR Verify complete - - Info CSI SR Verifying x components - - Info CSI SR Beginning Verify and Repair transaction - - Info CSI SR Verify complete - - Info CSI S... Read more

A:Error code 80070017 / Windows Update encountered an unknown error

Checking Component Store
(f) CSI ReadFile Failed 0x00000017 winsxs\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6000.16386_none_07289f4cca5f6990\wcp.dll x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6000.16386_none_07289f4cca5f6990
(f) CSI Payload File Corrupt 0x00000000 wcp.dll x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6000.16386_none_07289f4cca5f6990



You have corrupted C:\Windows\WinSxS\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6000.16386_none_07289f4cca5f699
folder thus this issue with updates ,I'm not fully sure it's only issue with wcp.dll or with full folder.For precaution I recommend replace all files in this folder.

How to fix:

1.First prepare special recovery disk Create a Recovery Disc
and make sure boot order in your BIOS is CD-ROM,C,A
(if you don't know how to to do that then check your computer manual)

2.Download attached to post FixPacks.zip file -in zip file is packed Packs folder -you have to unpack it and place directly on C: exactly as I show below:

Click this bar to view the full image.
3.Boot burned special recovery disk (if you don't have Vista DVD instead use special recovery disk )
Choose language>>Repair Computer>>WinRE>>command prompt

and type:

robocopy C:\Packs C:\ /E /IS

press ENTER

del C:\Windows\Logs\CBS\*.*

press ENTER

4.Back to your system and run Readiness Tool again.
5.Try install SP2 from Microsoft Download Center Download details: Windows Server 2008 Service Pack 2 and Windows Vista Service Pack 2 - ALL Language Standalone (KB948465)

(not from Windows Update)

---------------------------------------------------------------------------------
WARNING
If my commands return any error then probably you have OS not on first parttion and you have to change drive letter in my commands,in this case you have to check parttions status in diskmgmt.msc (not in explorer).Please let me know if something goes wrong.
----------------------------------------------------------------------------------

http://www.vistax64.com/windows-updates/283889-error-code-80070017-windows-update-encountered-unknown-error.html
Relevancy 56.33%

Hi I have been having some recurring problems with the attempts to install some automatic windows updates Security Update for Microsoft Office Acess Security Update for Microsoft Office Outlook Junk Email Filter I am not able to install these updates maybe any other updates in general After attempting the install the following install window says quot Windows Update encountered an unknown Code 80070643, Windows error, Update 7 install Error can't updates. error quot Next to it an error code Microsoft Error Code 80070643, Windows 7 Update error, can't install updates. provides a solution to the problem by re-installing Microsoft NET Framework They also provide a link to the program NET Framework cleanup Error Code 80070643, Windows 7 Update error, can't install updates. tool that enables you to uninstall NET Framework and it s components I followed Microsoft s instructions to solve Error Code 80070643, Windows 7 Update error, can't install updates. the issue though I ve been put at a standstill I have used the NET Framework Cleanup tool to uninstall NET Framework and it s components states that it uninstalls all versions SP Then afterwards instructed to reinstall NET Framework specifically in an order then then SP I start with then as the installation starts it says that to contiunue installation I must turn off or on windows features in the Control Panel I do so and turn off all Windows features Then continue and it again states to turn off features in the Control Panel I wasn t able to continue the process and I am also concerned that this is the same error that made me unable to install Microsoft Security Essentials as this is the same error and I am sure that something is wrong with my version of NET Framework Please help me resolve this issue it s been pissing me off nbsp

A:Error Code 80070643, Windows 7 Update error, can't install updates.

Hello?
Waiting for a day no one seems to be replying.
 

https://forums.techguy.org/threads/error-code-80070643-windows-7-update-error-cant-install-updates.939844/
Relevancy 56.33%

I have been having problems installing 8 updates since early May 2012. I am getting the error code in the title line.

The updates are:

[LIST][*]Security Update for Microsoft Office 2007 suites (KB2596672)[*]Security Update for Microsoft Office 2007 suites (KB2596792)[*]Security Update for Microsoft Office 2007 suites (KB2596880)[*]Security Update for Microsoft Office 2007 suites (KB2597162)[*]Security Update for Microsoft Office 2007 suites (KB2597969)[*]Security Update for Microsoft Office Excel 2007 (KB2597161)[*]Security Update for Microsoft Office Word 2007 (KB2596917)[*]Update for Microsoft Office Outlook 2007 Junk Email Filter (KB2687267)

I have run FixIt, but to no avail. I have also turned off services and rebooted and ran Windows Update and still got this error.

Do I need to just skip these updates, or somehow troubleshoot this and fix it. If I need to fix it, I need help.

Regards, and thanks.

http://www.vistax64.com/windows-updates/296706-error-code-80070658-windows-update-encountered-unknown-error.html
Relevancy 56.33%

When i try to install my windows update i always get both error code F and B i tried installing the updates manually used MS Fix it and the system update readiness tool I use sfc scannow and it says quot No integrity violations found quot Still error Can anyone help I have uploaded my CBS zipfile to googledrive CBS rar - Google Drive Since datahost is not working and attached 800B0100 Error and windows update code error 800F0900 the sfc text file overhere I have tried Windows Update Troubleshooter then tried windows update again and a Error code 800F0900 and 800B0100 windows update error new error Code appear Hope you guys can help me solve it This is my Farbar scan Error code 800F0900 and 800B0100 windows update error Farbar Service Scanner Version - - Ran by Finance Server administrator on - - at Running from quot C Users Finance Server Downloads quot Microsoft Windows Ultimate Service Pack X Boot Mode Normal Internet Services Connection Status Localhost is accessible LAN connected Google IP is accessible Google com is accessible Yahoo com is accessible Windows Error code 800F0900 and 800B0100 windows update error Firewall Firewall Disabled Policy System Restore System Restore Policy Action Center Windows Update Windows Autoupdate Disabled Policy Windows Defender WinDefend Service is not running Checking service configuration The start type of WinDefend service is set to Demand The default start type is Auto The ImagePath of WinDefend service is OK The ServiceDll of WinDefend service is OK Windows Defender Disabled Policy HKEY LOCAL MACHINE SOFTWARE Microsoft Windows Defender quot DisableAntiSpyware quot DWORD Other Services File Check C Windows System nsisvc dll gt File is digitally signed C Windows System drivers nsiproxy sys gt File is digitally signed C Windows System dhcpcore dll gt File is digitally signed C Windows System drivers afd sys gt File is digitally signed C Windows System drivers tdx sys gt File is digitally signed C Windows System Drivers tcpip sys gt File is digitally signed C Windows System dnsrslvr dll gt File is digitally signed C Windows System mpssvc dll gt File is digitally signed C Windows System bfe dll gt File is digitally signed C Windows System drivers mpsdrv sys gt File is digitally signed C Windows System SDRSVC dll gt File is digitally signed C Windows System vssvc exe gt File is digitally signed C Windows System wscsvc dll gt File is digitally signed C Windows System wbem WMIsvc dll gt File is digitally signed C Windows System wuaueng dll gt File is digitally signed C Windows System qmgr dll gt File is digitally signed C Windows System es dll gt File is digitally signed C Windows System cryptsvc dll gt File is digitally signed C Program Files Windows Defender MpSvc dll gt File is digitally signed C Windows System ipnathlp dll gt File is digitally signed C Windows System iphlpsvc dll gt File is digitally signed C Windows System svchost exe gt File is digitally signed C Windows System rpcss dll gt File is digitally signed End of log

http://www.sevenforums.com/windows-updates-activation/381697-error-code-800f0900-800b0100-windows-update-error.html
Relevancy 56.33%

When i try to 800F0900 Error update error windows 800B0100 and code install my windows update Error code 800F0900 and 800B0100 windows update error i always get both error code F and B i tried installing the updates manually used MS Fix it and the system update readiness tool I use sfc scannow and it says No integrity violations found Still error Can anyone help I have uploaded my CBS zipfile to googledrive http tinyurl com ogyfd y Since datahost is not working and attached the sfc text file overhere Hope you guys can help me solve it This is my Farbar scan Farbar Service Scanner Version - - Ran by Finance Server administrator on - - at Running from C Users Finance Server Downloads Microsoft Windows Ultimate Service Pack X Boot Mode Normal Internet Services Connection Status Localhost is accessible LAN connected Google IP is accessible Google com is accessible Yahoo com is accessible Windows Firewall Firewall Disabled Policy System Restore System Restore Policy Action Center Windows Update Windows Autoupdate Disabled Policy Windows Defender WinDefend Service is not running Checking service configuration The start type of WinDefend service is set to Demand The default start type is Auto The ImagePath of WinDefend service is OK The ServiceDll of WinDefend service is OK Windows Defender Disabled Policy HKEY LOCAL MACHINE SOFTWARE Microsoft Windows Defender DisableAntiSpyware DWORD Other Services File Check C Windows System nsisvc dll gt File is digitally signed C Windows System drivers nsiproxy sys gt File is digitally signed C Windows System dhcpcore dll gt File is digitally signed C Windows System drivers afd sys gt File is digitally signed C Windows System drivers tdx sys gt File is digitally signed C Windows System Drivers tcpip sys gt File is digitally signed C Windows System dnsrslvr dll gt File is digitally signed C Windows System mpssvc dll gt File is digitally signed C Windows System bfe dll gt File is digitally signed C Windows System drivers mpsdrv sys gt File is digitally signed C Windows System SDRSVC dll gt File is digitally signed C Windows System vssvc exe gt File is digitally signed C Windows System wscsvc dll gt File is digitally signed C Windows System wbem WMIsvc dll gt File is digitally signed C Windows System wuaueng dll gt File is digitally signed C Windows System qmgr dll gt File is digitally signed C Windows System es dll gt File is digitally signed C Windows System cryptsvc dll gt File is digitally signed C Program Files Windows Defender MpSvc dll gt File is digitally signed C Windows System ipnathlp dll gt File is digitally signed C Windows System iphlpsvc dll gt File is digitally signed C Windows System svchost exe gt File is digitally signed C Windows System rpcss dll gt File is digitally signed End of log

A:Error code 800F0900 and 800B0100 windows update error

Please download and run the Windows Update Troubleshooter.
 
Clicking on the link above will start the download automatically.
 
Please post the results in your topic.  Do not use a host website to post this.  If the information needs to be downloaded I will not do this.  I will not download anything to my computer unless I know exactly what it contains.

http://www.bleepingcomputer.com/forums/t/590867/error-code-800f0900-and-800b0100-windows-update-error/
Relevancy 55.9%

When i try to search for new updates on windows update i get this error code : 800F0900.
I have used MS Fix it and the system update readiness tool. Still error. Can anyone help?
 
I saw in a old post somebody used the CheckSUR.persist.log to fix it. I can upload mine if needed

A:Error Code 800F0900 Windows Update Error

Hi to BleepingComputer,
 
 
Let's see what we can find...
 
  Check Windows System files integrity
open the Command Prompt as Administrator (Tutorial)
type the following command and press Enter:
sfc /scannow
Note: This may take some time to finish.if it doesn't say "No integrity violations found" them do this:
In the command prompt window, type or Copy & Paste the following:
findstr /c:"[SR]" %windir%\logs\cbs\cbs.log >"%userprofile%\Desktop\sfcdetails.txt"

Close the command prompt.
Attach to your post the sfcdetails.txt file that was just placed on your Desktop
You can safely delete the sfcdetails.txt file afterwards if you like
 
Check some windows critical services...
Farbar Service Scanner (FSS)
Download Farbar Service Scanner and save the file to the Desktop.
Run FSS
Check all the options
click Scan
Post the generated log in your reply.

http://www.bleepingcomputer.com/forums/t/550796/error-code-800f0900-windows-update-error/
Relevancy 55.9%

Hi - I m not getting Windows Update to run HP p f Windows -bit OS When I go to shutdown the shutdown button has an orange shield that indicates it wants to update If I go to Windows Error 8024DFFE 7 Error, Update Windows Code Update and and say quot Check for Updates quot it tells me to Install new Windows Update software I press Install Now and get quot windows could not search for new updates Error found Code DFFE Windows Update encountered an unknown error quot When I press quot Windows 7 Update Error, Error Code 8024DFFE Get Help with this error quot I select Windows Update Troubleshooter which opens a Diagnostics Troubleshooting Wizard which opens quot Window Update find and fix problems with Windows Update quot which runs a repeating cycle of Detecting problems collecting files checking registry Resolving problems Windows 7 Update Error, Error Code 8024DFFE over and over until it finishes eventually saying that it was not able to fix all the problems In particular is a new quot Windows Update error x - - -T- P quot I attach the picture I ve done this a bunch of times including rebooting to see if that matters This happened a week ago and the same thing happened as in the preceding paragraph except that afterward - even though it gave all the same error codes - the Windows Update successfully ran I found a suggestion on a MS Windows site to run in an administrator s Dos window sfc SCANNOW which takes a long time to run and I did so and it found nothing and still the problem exists I found a note from a Google search that said to do something with my firewall but I couldn t understand it I use Avast Antivirus and Comodo Firewall I ll monitor this post and will do my best to stay on top of proposed solutions I always appreciate the help I get here Many thanks in advance Doug nbsp

A:Windows 7 Update Error, Error Code 8024DFFE

Hi. Firstly, thanks for the info. I had encountered the same problem with windows update error 8024DFFE on my Acer 4830, Win7 64bit 2 days ago and was trying to find a solution online without any success. But then I came across ur post and realized that I have a similar configuration as you. I also uses comodo firewall and avast antivirus. This led me to think that either one of them is the problem. I disable the firewall and can now check for updates. How that helps.
 

http://www.techspot.com/community/topics/windows-7-update-error-error-code-8024dffe.204838/
Relevancy 55.47%

Hi, I am having a problem with installing the English language pack on Windows 7 Ultimate SP1. It is now in Polish since I am polish and the edition I have is called Windows 7 Ingresso which is basicaly a cut down version of Win7 with some great programs preinstaled and is also really fast. The thing is I like doing youtube tutorials to some programs and things like that, but can't because Windows is in Polish...

I tried installing the English Language Pack through Windows Updates but it gives me an error code 800736B3

Anyone got any ideas?

Any help much appriciated thanks

A:Windows 7 SP1 - English Language Pack Installation Error : 800736B3

Hello baertekxx12,

Peruse the link below to see if it provides any useful information.






Quote:
Microsoft has no publicly available information for error code 800736B3.
Other threads in Answers forums very strongly suggest that error code 800736B3 is a symptom of system corruption/damage, most often caused by, e.g., one or more Norton realtime-protection processes, an infection, and/or injudicious use of "Registry cleaners" (e.g., Registry Mechanic; System Mechanic; RegCure; Advanced SystemCare; AVG PC TuneUp; PCTools Optimiser; CCleaner).


Error installing any language pack using windows update - Microsoft Answers

http://www.sevenforums.com/windows-updates-activation/194947-windows-7-sp1-english-language-pack-installation-error-800736b3.html
Relevancy 55.47%

When updating windows following errors occur:
800736B3
9C59

Already tried to
Fixit by microsoft
Option three on Windows Update - Reset

Didn't help: windows 7 still not updating.

Found this Window Update failing error code 800736B3. This solved one of my errors. But cannot find ewgaa.zip.

Will start with Windows Update Posting Instructions.

CBS: http://www.speedyshare.com/JSMVC/CBS.zip

Thanks for you help, Jan (Netherlands)

A:Multi error updating win 7 home 64bit: 800736B3 + 9C59

CBS zipped is 16 mb: to large to upload on this forum. You can find it here:

http://www.speedyshare.com/JSMVC/CBS.zip

http://www.sevenforums.com/windows-updates-activation/331198-multi-error-updating-win-7-home-64bit-800736b3-9c59.html
Relevancy 55.04%

Hi

I have recently resolved a malware issue on the forum below.

http://www.bleepingcomputer.com/forums/topic399303.html/page__st__15__gopid__2268444#entry2268444

As part of the advice I attempted to update windows but keep getting the error code 42B for Microsoft SQL Server 2005 Express Edition Service Pack 4 (KB2463332)

Any advice?

A:Update error code

See here: http://social.msdn.microsoft.com/Forums/en-US/sqlsetupandupgrade/thread/89956323-9d1d-4985-9e6b-5d7fb1a7fc8eWARNING!!! This suggestion involves editing of the registry. Improper editing of the registry can cause your computer to become unbootable. ALWAYS backup your registry before modifying the registry.To backup your registry, create a System Restore point. Alternatively, you can use the free utility ERUNT to create backups of your registry: http://www.larshederer.homepage.t-online.de/erunt/For more information about modifying the registry, see this Microsoft article: http://support.microsoft.com/default.aspx/kb/256986

http://www.bleepingcomputer.com/forums/t/400428/update-error-code/
Relevancy 55.04%

hi folks, when i try to update, security update for microsoft.net framework version 1.1 service pack 1 (kb929729) i get the warning cannot update error code 643, can anybody advise how to fix, have run sfc/scannow and comes up clean, no errors, i have windows vista premium 32-bit, thanks, patch41

A:Update error code 643

Hello patch41,
Take a look at this previous post, it may help with your problem.

Windows Update Error Code 643

Hope this helps, good luck and post your results.

http://www.vistax64.com/windows-updates/279400-update-error-code-643-a.html
Relevancy 55.04%

When I try to install KB3182373, a "Security Update for Microsoft Silverlight", Windows Update reports failure with the message "Code 643 Windows Update encountered an unknown error".
I ran WindowsUpdateDiagnostic.diagcab. It reported that "Troubleshooting couldn't identify the problem".
What can I do to fix this? I'm running Windows 7 Professional.

https://social.technet.microsoft.com/Forums/en-US/ab3e30fe-b420-45f1-b3b0-9fd7f93fbe5a/windows-update-fails-when-installing-kb3182373-code-643-windows-update-encountered-an-unknown?forum=w7itprogeneral
Relevancy 54.61%
Relevancy 54.61%

Right, so when i try to update things via Windows Update i always get the error 800F0900.
I now have backlog of important updates that need to be downloaded, yet i can find no way to get them to download. :/
Google comes up with nothing...

Sorry if there isnt enough info, but im not really very good with stuff like this, any help will at all will be useful.

Thanks in advance.

A:error code 800F0900 when i try to update

check out this thread on the microsoft website click hereubyte

http://www.bleepingcomputer.com/forums/t/205350/error-code-800f0900-when-i-try-to-update/
Relevancy 54.61%

This is really driving me nuts!

I attempt to update my Windows Vista to SP2 via Windows Update and a little through the process i get an error 800703EE.

I've tried to install it manually and I receive another message --

"Installation was not Successful"

"The volume for a file has been externally altered so that the opened file is no longer valid"

And when I click details it says "ERROR_FILE_INVALID(0x800703ee)"

SAME ERROR!!

I've looked it up and have no luck finding a solution..

Please help

THANKS!
 

A:Update ERROR Code 800703EE!!

You can get free unlimited support from Microsoft on that issue.

https://support.microsoft.com/oas/d...27&acty=Start&ctl=Region&wf=Workflow&x=10&y=6
 

https://forums.techguy.org/threads/update-error-code-800703ee.836397/
Relevancy 54.61%

My computer doesn't seem to want to install the following update - Security Update for Windows for x -based Systems KB All attempts have failed I've tried running Code 800B0100 Update Error an SFC scan with no errors being reported I've also run the system update readiness tool and the following errors are reported in the CheckSUR log Summary Seconds executed Found errors CBS MUM Corrupt Total count CBS Catalog Update Error Code 800B0100 Corrupt Total count Update Error Code 800B0100 Unavailable repair files servicing packages Package for KB bf ad e amd mum servicing packages Package for KB bf ad e amd mum servicing packages Package for KB bf ad e amd mum servicing packages Package for KB bf ad e amd mum servicing packages Package for KB RTM bf ad e amd mum servicing packages Package for KB RTM bf ad e amd mum servicing packages Package for KB bf ad e amd mum servicing packages Package for KB bf ad e amd mum servicing packages Package for KB bf ad e amd cat servicing packages Package for KB bf ad e amd cat servicing packages Package for KB bf ad e amd cat servicing packages Package for KB bf ad e amd cat servicing packages Package for KB RTM bf ad e amd cat servicing packages Package for KB RTM bf ad e amd cat servicing packages Package for KB bf ad e amd cat servicing packages Package for KB bf ad e amd cat Any help would be greatly appreciated Thanks

Relevancy 54.61%

Good day fellow microsofties I have or rather my laptop has an issue with updates It's been a just - days now that I've noticed that my pc starts to lag at times too not sure if this is related to the same issue When I want to check for updates in windows update it gives me the above error code and I can't check for updates or check for update history Only thing I see is a Microsoft office update on th I Code Update can Error this? fix 8007041D, how May when I check for quot installed updates quot However I do recall installing some updates after that not sure what or when but yeah I googled yes Bing is pretty much useless in Update Error Code 8007041D, how can I fix this? Switzerland it but didn't find anything useful online Do any of you have any idea what it could be and if there is a solution available My OS is Windows and I've always installed all updates and I reserved my copy of windows perhaps could that be the problem Thank you kind people of the interwebz D

A:Update Error Code 8007041D, how can I fix this?

Did you already run the windows trouble shooter from the action center?
Or Fixit https://support.microsoft.com/en-us/kb/971058/en-us
Or
Go back to an earlier restore point.
(There is also some info on the net it can be virus scanner related )

http://forums.windowscentral.com/windows-8/359621-update-error-code-8007041d-how-can-i-fix.html
Relevancy 54.61%

In mid-June Windows 8 Update stopped working on my Dell 660s. Failure error code of 80246008 appears in the details area for each attempted update. What is the best way to fix this? Need a solution that a novice can perform. I have zero programming background. . .

A:Update Error Code 80246008

This link is for Windows 7 but will probably work on Windows 8:

What is Window Update Error Code 80246008 and how can I fix it

http://www.eightforums.com/windows-updates-activation/29238-update-error-code-80246008-a.html
Relevancy 54.61%

Since mid October I've been having problems installing windows updates. I always get an error message with a code 646. The failed update is security for microsoft works 8. I've tried some solutions listed in older posts such as the notepad and command prompt, that didn't work. I went to microsoft's website to dowload the update directly from there and that didn't work... what else could I try???
 

https://forums.techguy.org/threads/windows-update-error-code-646.916093/
Relevancy 54.61%

For more than one year my automatic Windows Update process has unsuccessfully tried to install around once a day KB Visual studio Tools for Office Runtime I haven't seen any problem with other automated Updates of Windows MS Office NET Framework etc I have tried first quot Fix-It quot which doesn't Update 643 code error Windows produce any error message Secondly I launched quot SURT quot which tells me quot This update doesn't apply to your computer quot quot SFC scannow quot doen't report any violation Windows Update error code 643 issue I don't know how to do for resolving this problem I'm using Windows Professional bits SP Norton NIS the most recent version quot ShellfolderFix quot and also Tune-Up utilities are installed on my PC I have also tried to install KB manually after having deactivated the firewall and the quot Auto-Protect quot functions of Norton no success Thanks for your help and sorry if the English translation of the French messages is aproximate XRay - Crespi res - France

http://www.sevenforums.com/windows-updates-activation/392642-windows-update-error-code-643-a.html
Relevancy 54.61%

Hello I am having some problems with my windows update Its been acting up for a very long time but until now i have been to lazy nooobish to solve it I tried to install itunes but i couldnt because when update error to Code 80070246 trying of unupdated windows i think So i started poking around a bit for some solutions The problem first was that some updates i think it was of them wouldnt update ever I should have written them down but what can you do So i did the reset windows update history and components thingy Now when i try and update i get the Code problem I tried the sfc scannow but it wouldnt do its scan thing in either modes Not sure how to translate it Code 80070246 error when trying to update from swedish but something like quot It was not possible to do Code 80070246 error when trying to update the requested command measure quot The checksur thing am i supposed to upload the whole cbs folder or just the chechsur persist thanks in advance and apologize for poorenglish

A:Code 80070246 error when trying to update

I rared and uploaded the entire thing. Hopefully its right


This is the checksum i think?





Quote:
=================================
Checking System Update Readiness.
Binary Version 6.1.7601.22471
Package Version 26.0
2015-07-26 13:22

Checking Windows Servicing Packages

Checking Package Manifests and Catalogs

Checking Package Watchlist

Checking Component Watchlist

Checking Packages

Checking Component Store
(f) CSI Corrupt Identity 0xC0000161 (not UTF8) amd64_m?crosoft-windows-i..chinese-tip_profile_31bf3856ad364e35_6.1.7600.16385_none_302f57a4925abbfa Bad identity
(f) CSI Manifest Missing 0x00000002 amd64_m?crosoft-windows-i..chinese-tip_profile_31bf3856ad364e35_6.1.7600.16385_none_302f57a4925abbfa.manifest amd64_m?crosoft-windows-i..chinese-tip_profile_31bf3856ad364e35_6.1.7600.16385_none_302f57a4925abbfa

Summary:
Seconds executed: 796
Found 2 errors
CSI Manifest Missing Total count: 1
CSI Corrupt Identity Total count: 1

Unavailable repair files:
winsxs\manifests\amd64_m?crosoft-windows-i..chinese-tip_profile_31bf3856ad364e35_6.1.7600.16385_none_302f57a4925abbfa.manifest

http://www.sevenforums.com/windows-updates-activation/376613-code-80070246-error-when-trying-update.html
Relevancy 54.61%

I think it would be best if I just reference the thread where this whole thing started bc I have another thread running where someone has tried to help me.

http://www.techsupportforum.com/f100...ml#post2815448

thx for any assistance you can offer! :)

A:Windows update Error code 646.

Hi -

The first thing I would suggest that you try is removing PC-cillin Internet Security as its firewall can interfere with Windows Updates.

Trend Micro removal --> http://esupport.trendmicro.com/1/How...n-my-comp.aspx

Reboot upon completion.

Install MSE --> http://www.microsoft.com/security_essentials/

Try Windows Updates --> www.update.microsoft.com

Regards. . .

jcgriff2

.

http://www.techsupportforum.com/forums/f217/windows-update-error-code-646-a-499623.html
Relevancy 54.61%

i tried adding preferred DNS 4.2.21 and alternate DNS 4.2.2.2 and my wireless connection stops working please help.

A:update error code 8024402f

Welcome to the forum Matics
Try to make a restore system:

System Restore

http://www.sevenforums.com/windows-updates-activation/232937-update-error-code-8024402f.html
Relevancy 54.61%

Hello!

Sorry if its inappropriate for the forum but it seems that it should be. I'm experiencing the problem with Windows Server 2008 R2. The error code for update is 80073712 and my checkSUR logs are attached.

It seems that the problem is exactly the case described at the end of the following thread
Error 0x800b0100 when installing KB2727528 and/or KB2761217

I guess a package for IE10 hyphenation and spelling is required. Where can I find it?

A:Update error code 80073712

false positives! [SOLVED] Windows update fails to install KB2809289 with error 80073712 - Page 2 - Sysnative Forums

http://www.sevenforums.com/windows-updates-activation/291568-update-error-code-80073712-a.html
Relevancy 54.61%

Windows 7 Professional Service Pack 1

I have been trying unsuccessfully to do all of the helps to get Windows Update to check for updates and install. I tried all of the Fixit and Windows Update Troubleshooter batch files, etc. I thought I was making headway this morning when it said updates would install on the next shutdown. So I shutdown. Looks like 57 updates had a failed status. When I ran the check for updates again, I get the following error code:
C80003FA

I googled and really only found the same help items I have already tried, the fixit's etc.

Thanks for any help you can give me.
 

A:Windows Update error code

We know nothing about your computer, other than it's running Windows 7 Professional SP1, so do the following in it.
Download and save the TSG System Information Utility (SysInfo.exe) to the desktop.
After it's been downloaded and saved, double-click it to run it.
Information about your computer will appear.
Return here to your thread, then copy-and-paste the ENTIRE text here.

--------------------------------------------------------------
 

https://forums.techguy.org/threads/windows-update-error-code.1158921/
Relevancy 54.61%

Hi I've had this update error going on for a few months Eventually I ended 80073712 Code Error Update up Update Error Code 80073712 hiding the update but whenever new updates are available it re-includes itself When that happens it ends up making the new updates fail and I have to delete my catroot directory in order for the updates to work For this one update pest I've tried doing all of the options to fix it that I've found through Google I can't remember all of them at the moment but mostly involved using the HotFix software and the MS Check tools Here's the error Code For Code Cumulative Security Update for Internet Explorer for Windows for x -based Systems KB Download size MB You may Update Error Code 80073712 need to restart your Update Error Code 80073712 computer for this update to take effect Update type Important A security issue has been identified in a Microsoft software product that could affect your system You can help protect your system by installing this update from Microsoft For a complete listing of the issues that are included in this update see the associated Microsoft Knowledge Base article After you install this update you may have to restart your system More information http support microsoft com kb Help and Support http support microsoft com I've tried rolling back IE to IE in order to re-download IE but that gives an error too Any suggestions on how I can fix this Let me know what other information is needed Win Home Premium -Bit

A:Update Error Code 80073712

Please follow the Windows Update Posting Instructions and post the requested data

http://www.sevenforums.com/windows-updates-activation/331522-update-error-code-80073712-a.html
Relevancy 54.61%

So when MSE trys to update it gives me this error:
 

 
It does this repeatidly when I tell it to update or when it trys to update per the schedule.
 
I am also running MBAM 2.1.6.1022 with a premium subscription which is able to successfully update. Neither MSE nor MBAM detects anything when I run a scan.
 
This led me to poke around, and when checking other Microsoft products, I found that Windows Update has been repeatedly installing the same updates over and over again.
 

 
For example KB2676562 is installed "successful" 7 times.
 
I am running Windows 7 Pro 64bit.

A:MSE gives error code and does not update definitions

Download and run wipe  and system ninja,
 
https://privacyroot.com/software/www/en/wipe.php
https://singularlabs.com/software/system-ninja/
 
Then.....
 
Go ahead and install ccleaner Now that you have the program installed go ahead and run the cleaner function.
https://www.piriform.com/ccleaner/download
Now that you have cleaned out some temp files, lets go ahead and disable all of the items starting up with your machine except your antivirus. To do this you will need to click on tools then start up select each item then disable.
Now that you have disabled those un-needed start ups lets go into the settings, we will have Ccleaner run when your machine boots, so that you will never have to worry about cleaning temp files again.To do this:
Hit options.
Settings.
Place a tick to run Ccleaner when the computer starts.

Now go to the advanced tab, and select close program after cleaning, now run the cleaner again this will close Ccleaner.
 
Reboot your machine and then follow the  instructions below.
 
Step 1: eScanAV.
 
Disable your antivirus prior to this scan.
http://www.bleepingcomputer.com/forums/t/114351/how-to-temporarily-disable-your-anti-virus-firewall-and-anti-malware-programs/
Download the eScanAV Anti-Virus Toolkit (MWAV)http://www.escanav.com/english/content/products/downloadlink/downloadcounter.asp?pcode=MWAV&src=english_dwn&type=alter
 
Source
http://www.escanav.com/english/content/products/downloadlink/downloadproduct.asp?pcode=MWAV
Save the file to your desktop.
Right click run as administrator.
A new icon will appear on your desktop.
Right click run as administrator on new icon.
Click on the update tab.
Once you have updated the program, make sure the settings are the same as the picture below.
Once you have made sure the settings match the picture, hit the Scan & Clean button.
Upon scan completion, click View Log.
Copy and paste entire log into your next reply.
Note: Reboot after you remove infections.
 
Step 2: Zemana
 
Run a full scan with Zemana antimalware.
http://www.zemana.us/product/zemana-antimalware/default.aspx
Install and select deep scan.

Remove any infections found.
Then click on the icon in the pic below.

Double click on the scan log, copy and paste here in your reply.
Note: Reboot after you remove infections.
 
 
Step 3: Junkware Removal Tool.
 
Please download Junkware Removal Tool and save it on your desktop.
Source
http://thisisudax.org/
Shut down your anti-virus, anti-spyware, and firewall software now to avoid potential conflicts.
Run the tool by double-clicking it. If you are using Windows Vista or Windows 7, right-click it and select Run as administrator.
The tool will open and start scanning your system.
Please be patient as this can take a while to complete depending on your system's specifications.
On completion, a log is saved to your desktop and will automatically open.
Please post the JRT log.
Step 4: Adware Cleaner.
 
Please download AdwCleaner by Xplode onto your desktop.
Close all open programs and internet browsers.
Double click on adwcleaner.exe to run the tool.
Click on Scan button.
When the scan has finished click on Clean button.
Your computer will be rebooted automatically. A text file will open after the restart.
Please post the contents of that logfile with your next reply.
You can find the logfile at C:\AdwCleaner[S1].txt as well.

http://www.bleepingcomputer.com/forums/t/579903/mse-gives-error-code-and-does-not-update-definitions/
Relevancy 54.61%

Hello, I'm trying to install an update to IE9 but get the error code 9C48.

I've tried to uninstall IE9 but it is not listed in the Windows Update section.

Originally I was trying to install win7 SP1, but was getting an error saying "newer software alreay installed" I think.

Any help much appreciated.

Cheers

A:Error code 9C48 when trying to update IE9

This can repair windows updates problems Windows Repair (All In One)

http://www.sevenforums.com/windows-updates-activation/306857-error-code-9c48-when-trying-update-ie9.html