Windows Support Forum

Windows Updates Failed BITS failed to start error code 2147024894

Q: Windows Updates Failed BITS failed to start error code 2147024894

anybody have any ideas?
have tried sfc /scannow
also the steps in this Windows Update Error 80246008 in Windows 7 - Fix
but to no avail, i still receive the error message

i have also used take ownership on the downloader file in programdata/microsoft/network
and was able to start bits service once i then re enabled windows update. it hung for awhile so i restarted and got the same error for bits, tried take ownership again, but still get the same error
screenshot included

Relevancy 100%
Preferred Solution: Windows Updates Failed BITS failed to start error code 2147024894

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Windows Updates Failed BITS failed to start error code 2147024894

Please follow the Windows Update Posting Instructions and post the requested data
If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

Also...

Open Event Viewer
click on the Windows logs entry in the left pane to expand it.
Now click on the Application entry - wait while it loads.
Click on 'File' in the menu bar and select Save...
Save the file as Appevt.evtx
Repeat for the System log
then zip both, and upload them.

http://www.sevenforums.com/windows-updates-activation/334252-windows-updates-failed-bits-failed-start-error-code-2147024894-a.html
Relevancy 106.02%

All the dependencies for BITS are running but BITS won't start SFC says everything -2147024894" fail won't Updates code start. BITS "error - is OK CHKDSK is OK Now what UPDATE After rebooting found the following errors in SYSTEM log DCOM got error Updates fail - BITS won't start. "error code -2147024894" quot quot Updates fail - BITS won't start. "error code -2147024894" attempting to start the service WSearch with arguments quot quot in order to run the server D C F-AC - F F-BEB - C C CE DCOM got error quot quot attempting to start the service WSearch with arguments quot quot in order to run the server Updates fail - BITS won't start. "error code -2147024894" E B D-F A- D -B A - The server D B- A - - B - B did not register with DCOM within the required timeout Examined the first key CE i e WSearch and found it contained a REG SZ named AppID with Data E B D-F A- D -B A - Examined the third key which is the BITS so all this is telling me is that BITS didn't start and register with DCOM But why

http://www.sevenforums.com/windows-updates-activation/384837-updates-fail-bits-wont-start-error-code-2147024894-a.html
Relevancy 99.51%

Hi There I'm getting the errors below and but I have not got any BSOD The errors I'm getting in nbsp eventviewer are Pku ulog failed to start xC-- Negolog failed to start IDListenLog failed to start P PLog failed to start and HomegroupLog failed to start all with the same failure code xC-- This is what the logs files says about each error Pku ulog Unknown GUID c a fb- a -d - -dc e a No Format Information found p plog Unknown GUID fc d ca -e c - c-be -e e a bbf No Format Information found negolog Unknown GUID f- f start, failed to Negolog and all P2PLog to Errors failed start, 0xC-- Pku2ulog HomegroupLog 0xC--35, failure to 35. start, to with failed start code IDListenLog the failed same start to failed a- -ddb - ab ad d No Format Information found idlistenlog Unknown GUID a f-b - - aa- ef No Format Information found homegrouplog Errors Pku2ulog failed to start 0xC--35, Negolog failed to start, IDListenLog failed to start, P2PLog failed to start and HomegroupLog failed to start, all with the same failure code 0xC-- 35. Unknown GUID f a a- - ede-ff b-dd dafeed No Format Information found However the 'Unknown xx ' number changes times to times Could you help me please Thank you very much for your attention Best Regards

A:Errors Pku2ulog failed to start 0xC--35, Negolog failed to start, IDListenLog failed to start, P2PLog failed to start and HomegroupLog failed to start, all with the same failure code 0xC-- 35.

Hi,
If you have Home group set up, please go to Control Panel ? Network and Sharing Center. Choose homegroup and sharing options and click ?Leave the homegroup?.Juke Chou
TechNet Community Support

https://social.technet.microsoft.com/Forums/en-US/15c580c0-cbfd-48aa-b058-2de145336920/errors-pku2ulog-failed-to-start-0xc35-negolog-failed-to-start-idlistenlog-failed-to-start?forum=w8itprogeneral
Relevancy 81.84%
A:Error Code 800B0100 8 failed windows updates

  
Quote: Originally Posted by fragital


dfgsdfgsfg


If you want assistance, don't post gibberish. Try letting us know what problems are, and what you have tried to solve them.

http://www.sevenforums.com/windows-updates-activation/304268-error-code-800b0100-8-failed-windows-updates.html
Relevancy 81.84%

Several failed Windows 7x64 updates (see attachements)

error code 800B0003

Attachment 352135

Ran SURT
Ran sfc/scannow in elevated prompt. It found errors that it could not fix.
Note: I could not upload the entire CBS folder as a rar or a zip,( I kept getting a 505 error) so I uploaded the cbs log file.

A:Windows 7 failed updates error code 800B0003

I need tha CheckSUR.log file as well please... and the c:\windows\windowsupdate.log file

http://www.sevenforums.com/windows-updates-activation/363672-windows-7-failed-updates-error-code-800b0003.html
Relevancy 81.22%

Hello,
I have a pretty frustrating problem with my Windows 8.1 laptop. The BITS service won't start. There are 3 different errors shown in Event Viewer:
1. The Background Intelligent Transfer Service service terminated with the following service-specific error:
The system cannot find the file specified.
2. The BITS service failed to start. Error 0x80070002.
3. The server {4991D34B-80A1-4291-83B6-3328366B9097} did not register with DCOM within the required timeout.
So far I have tried:
-chkdsk
-sfc/scannow
-Windows Update Troubleshooter
-wsreset.exe
-Refreshing the image using DISM
-making sure the registry key parameters were correct
How can I fix this issue?
Thank you very much

A:The BITS service failed to start. Error 0x80070002.

After looking more into the issue, I noticed a few other problems.
1. I can't register qmgr.dll: the module qmgr.dll" was loaded but the entry-point DllRegisterServer was not found
2. Windows Automatic Update Service is not showing up in services.msc. I read in a forum that I should type this command into command prompt to reinstall it: %windir%\System32\rundll32.exe setupapi,InstallHinfSection DefaultInstall 132 %windir%\inf\au.inf
But command prompt just tells me that the installation failed.

http://www.techsupportforum.com/forums/f299/the-bits-service-failed-to-start-error-0x80070002-1026266.html
Relevancy 81.22%

Hello, I was referred here from another forum topic.... Please follow this thread to review all my posthttp://www.bleepingcomputer.com/forums/t/257239/possible-memory-modules-infected/I can't get Windows to updating.... Error Code 80070490 with 11 failed updatesThank you for everyones help

http://www.bleepingcomputer.com/forums/t/265454/windows-not-updating-error-code-80070490-with-11-failed-updates/
Relevancy 111.37%

Hi when running windows update all the updates fail and give the error code 800706F7. I have retried 3 times all to the same result. i have searched for this error code and the only results i found was about removing a previous 2014 update but this was not on my computer. i have ran the System Update Readiness Tool which installed 1 update however i can still not download the other updates

A:windows update error code 800706F7 54 important updates failed

Tried again and am now also getting error codes 80246007 and 8007002

http://www.sevenforums.com/windows-updates-activation/371496-windows-update-error-code-800706f7-54-important-updates-failed.html
Relevancy 110.51%

Unable to download Windows updates..BIT transfer service not running..changed from automatic to manual..still wont work I have Windows 7 Home Premium 64

https://social.technet.microsoft.com/Forums/en-US/64351195-417f-4a8f-a27b-cc224241f68c/unable-to-download-updateserror-code-2147024894?forum=w7itprogeneral
Relevancy 105.35%

Hello - help request for BITS Background Intelligent Transfer Service will not start Machine is Windows x won't errors 0x8007002 BITS 80246008, start, 2147024894, w SP Home Premium on a Sony VAIO VPCEB FX laptop I've been at this for hours over weeks with no resolution Originally the laptop had some adware popups type stuff Checked things over and also noticed that Microsoft Updates were not applying Cleaned off malware adware with Kaspersky offline Rescue CD then used Spybot S amp D and then BITS won't start, errors 2147024894, 80246008, 0x8007002 Malware Byte and CCleaner to look for other things The computer works fine otherwise can connect to internet and all that and I even removed the awful Incredimail replacing it with Thunderbird that was delivering advertising that the user would click on that allowed this to happen in the first place But MS Update still will not work Notes to keep in mind I've tried to be thorough to try to eliminate you helpers asking me things I could've provided in this first post - KIS Kaspersky Internet Security latest version is on the machine and has always been disabled protection while applying fixes etc - rather than re-entering an entire reference book I am giving some examples of posts I have looked at and attempted to repair from - after some googling about the error codes given I have tried multiple times applying the suggested fixes from the following information but without complete resolution - the cmd exe prompt bat and other fixes are always run as an administrator - also stop all 'junk' processes like VAIO update checks and other unnecessary things just to make sure they are not interefering - no services are set to disabled - running an offline thorough chkdsk finds no errors nor disk problems - time amp date are correct on PC no BIOS errors - there is enough free disk space - safe mode was tried for those things that can be run in safe mode but not all can - computer restarted for each repair attempt - the Windows Update service is running as is COM EVent System COM System Application Cryptographic Services DCOM Server Process Launcher RPC Remote Procedure Call Windows Event Log and these are set to Automatic start as is BITS but it isn't starting - using net start bits from elevated cmd exe indicates BITS failed to start This is also executed by some of the bat files and MS Fixits below So what happens is you run Microsoft Update from Control Panel It checks for updates and finds some but can't download them giving error code Windows Update encountered an unknown error So we start with Code - BITS missing http answers microsoft com en-us w - b f sfc scannow results in quot Windows resource protection found corrupt files but was unable to fix some of them Details are included in the CBS log windir Logs CNS CBS log quot which is included in the Logs z file Note that the log was renamed and then sfc scannow run again to minimize the old data in the log Using baretail exe to view that log seems to indicate some repairs can not be completed but then later says all repairs completed but I'm not all sure how to correctly interpret everything listed Next up checking out BITS Windows Update error in WIndows Windows Update error - Windows Help Using either the task manager or my preference the MMC and looking at services the BITS is not running even tho' it is set to Automatic Start and it's dependencies are started and running and it is set to restart on failure Manually starting it results in error Windows could not start the BITS on Local Computer - BITS failed to start error code And indicates to check The Event Log - gt System - gt which shows error code x See further down which leads me to Windows Windows Updates Failed BITS failed to start error code Windows Updates Failed BITS failed to start error code Reset Reregister Windows Update Components bat Reset Windows Update Full bat These execute 'net start bits' from elevated cmd exe but indicate that BITS failed to start Next How d... Read more

A:BITS won't start, errors 2147024894, 80246008, 0x8007002

You have Kaspersky installed - this has on occasion been known to cause this type of problem.

Having MSE also installed is likely to cause slowdowns, and possibly other problems as well.

You also have Spybot starting at boot, as well as MBAM... as well as Threatfire.

I suspect that at least part of your problem is a totally strangled system!

Please UNINSTALL the following...

Threatfire
Kaspersky
Spybot

then run their cleanup tools
How to uninstall? - Spybot Anti-malware and Antivirus
Service articles
ThreatFire Removal Tool Download

Once complete, you may also need to uninstall MSE and run the tool...
http://support.microsoft.com/kb/2435760

I *think* you can leave MBAM installed.

then reinstall ONLY MSE

Having completed the above, open an Elevated Command Prompt, and run the following command:

NETSH WINSOCK RESET

accept the reboot request, and then try Windows Update.

http://www.sevenforums.com/windows-updates-activation/382560-bits-wont-start-errors-2147024894-80246008-0x8007002.html
Relevancy 105.35%

So I casually installed some updates with Windows Update Several updates failed I restarted computer as prompted Next Code:8000FFFF failed, Error Updates thing I know I get bombarded with or more pop-ups telling me Updates failed, Error Code:8000FFFF things like quot The cordinal could not be located in the dynamic link library iertutil dll quot among other Updates failed, Error Code:8000FFFF similar messages Most programs wont open anymore chrome starts up but it wont connect anywhere To make it extra odd the only reason I can type this message here is because Firefox still works perfect Not sure what to do I've tried the following Scf scannow - Found some corrupt DLL files restarted and problem persists Manually uninstall all the updates that I installed today I managed to delete all except two of them Tried uninstalling those updates using CMD with wusa command no success All I get is this error message quot Installer encountered an error x c quot I should mention that I do not have System Restore or Backup activated The quot cordinal quot message shows up like shown in the attachment but several times with different programs EDIT Added CBS log

A:Updates failed, Error Code:8000FFFF

Please follow this tutorial and post an MGADiag report.

http://www.sevenforums.com/windows-updates-activation/234159-windows-genuine-activation-issue-posting-instructions.html

Ignore errors produced when clicking on the Copy button - they simply mean that the tool could not create the backup files for some reason. The data is still copied to the clipboard for pasting to your response.

http://www.sevenforums.com/windows-updates-activation/357597-updates-failed-error-code-8000ffff.html
Relevancy 105.35%

For months now I've had windows tell me that I have some updates to be installed. Every time I try it fails to update giving me the error code: 800736B3.

A:Error Code: 800736B3 with 7 failed updates

also my cbs.log was too big to fit in that one post so i had to make another one.

http://www.sevenforums.com/windows-updates-activation/343776-error-code-800736b3-7-failed-updates.html
Relevancy 105.35%

Hello,
I have been trying for sometime to fix this problem of failed updates. I have been in touch with microsoft and followed all their instructns this is where i am at. The last thing i did was to rename the file for updates. This did not work but has wiped clean all my update history and since then i am not recieving any updates at all, previously i was getting some but not the security updates.

I have also run all malware progs etc and do not detect any virus or anything

I am at a loss now on my next course of action i have not recieved any further instruction form microsoft
Any help would be appreciated thanks

A:Failed updates error code 80070490

Hi Welshwizard,

The error does indeed say that the file managing Windows Updates, the file that contains all relevant data as to what updates are installed, when they were installed etc, has been corrupted.

As I don't know what instructions you were given by them;

1.
Open up an elevated administrator Command prompt.
Run this command:
sfc /scannow
Let us know the results.

2.
Insert the Installation DVD.
Reboot the machine > Run the automatic repair.

3.
Boot the machien into Safemode with Networking, see what the updates says.

http://www.techsupportforum.com/forums/f217/failed-updates-error-code-80070490-a-602066.html
Relevancy 105.35%

so I tried to update the MSE today, but it failed with the description of failure followed:

error code: 0xc8000222
error description: cancel the scan

what's actually wrong with it? what should I do to be able to update the MSE? thanks in advance.

A:MSE updates failed, error code 0xc8000222

zephychan,

Are you having problems with Windows Update also?

Please do the following:
Downloading Farbar Service Scanner

Save to the Desktop.



Make sure the following options are checked:Internet Services
Windows Firewall
System Restore
Security Center
Windows Update
Windows Defender
Press: Scan

FSS creates a log, FSS.txt, on the Desktop.

Please provide the FSS.txt in your reply.


Also, let's see what your system shows with the following short scan...

Please download RogueKiller:
http://tigzy.geekstogo.com/roguekiller.php

Select the 32-bit version for your system.
Click the dark-blue button to download.
Save to the Desktop.

Close all windows and browsers.
Right-click and select: Run as Administrator

At the program console, wait for the prescan to finish. (Under Status, it says: Prescan finished.)
press: SCAN

When done, a report opens on the Desktop: RKreport.txt

Please provide the RKreport.txt (Mode: Scan) in your reply.

http://www.sevenforums.com/system-security/281314-mse-updates-failed-error-code-0xc8000222.html
Relevancy 105.35%

I have had numerous updates fail and I have no idea why, i've done a few methods such as using FixIt, sfc /scannow and checksur and nothing has worked so far, i'm running windows 7 64 bit,

thanks in advance!

A:Updates failed error code 80070308

Please follow the Windows Update Posting Instructions and post the requested data

If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

Please also post the C:\Windows\windowsudpate.log file

http://www.sevenforums.com/windows-updates-activation/367407-updates-failed-error-code-80070308-a.html
Relevancy 104.06%

Hi,

Since 10/07/2014 I am having serious problems with 9 updates in Windows Update.
I just took a look at some other topics in this forum section and it seems I am not the only one having these problems.

I've already tried several things i've found on the internet, but nothing really nothing worked out for me.
I've tried the hotfix, didn't work out; i've tried multiple CMD commands, didn't work out; i've tried to rename the catroot2 folder, didn't work out either...

Is this problem common? Because most of the updates are important; so i'd like them to be installed and they keep on failing every day since then.

If I need to post or upload something, please tell me, because i'm not a computer expert ;-)

Thanks in advantage,
Blizzard9041

A:Failed to install 9 updates: Error Code 80070308

Please open an elevated Command Prompt, and run the following command,

REG LOAD HKLM\COMPONENTS C:\Windows\System32\config\COMPONENTS
REG QUERY HKLM\COMPONENTS


post the results.


Here are some instructions to make life easier

1) To open an Elevated Command Prompt Window (the ECP window), click on Start, All Programs, Accessories – then right-click on Command Prompt, and select Run as Administrator. Accept the UAC prompt.
2) To run the commands easier, highlight the block of commands, and right-click on the highlight – select Copy. In the CP Window, click on the black/white icon at top left – select Paste. The commands will run but may not complete the last command, so hit the Enter Key once.
3) To copy the results... click on the Black/White icon in the top left, and select Edit... 'Select All', and hit the Enter key - then use Ctrl+V or r-click+Paste to paste it into your response.

http://www.sevenforums.com/windows-updates-activation/338122-failed-install-9-updates-error-code-80070308-a.html
Relevancy 104.06%

hey everyone, i'm using windows 7 home premium, but when i want to update my windows it always failed, it says error code of 80070057 . but those occurs on update for hotfixes and security update, updates like ms silverlight and ms office ran just fine, why is that?

sincerely,
fadli

A:always getting failed updates, shows error code 80070057

Did you try Googling the error code.

http://www.sevenforums.com/windows-updates-activation/197188-always-getting-failed-updates-shows-error-code-80070057-a.html
Relevancy 104.06%

I have been unable to install Windows updates since mid-December, and now have some 11 outstanding.

My machine is a 5 year old Acer Aspire M3910 64 bit Intel Core i3 CPU 540 @3.07GHz with 8GB RAM running Windows 7 Home Premium SP1.

I have downloaded and installed the System Update Readiness Tool from the Microsoft site. However the CBS.zip file generated from the CBS file produced by running this tool is some 12 MB in size and falls foul of the 8MB limit imposed by the forum, and I cannot attach it. How do I get over this?

I have also run SFC /SCANNOW, but it identified no issues.

Help to resolve this updating error would be very much appreciated.

Thank you in advance!

http://www.sevenforums.com/windows-updates-activation/390239-updates-failed-install-error-code-80071a91.html
Relevancy 104.06%

Alright First of all thanks to those who at least read this I'll also start by saying this isn't my first attempt at resolving this The first try left me beaten Code Error 643 Updates Failed: .NETFX Multiple broken bruised and I gave up So lets recap there About months ago I attempted to install a NETFX update believe it was I received error code I let it go for a week or two until a program required the update So I tried several quot fixes quot from Microsoft to resolve The final attempt being to uninstall ALL of NETFX and manually re-install each one individually I waited a few more days for that one Finally went to give it a go I made a list of the packages I needed to re-install and then Multiple .NETFX Updates Failed: Error Code 643 used the cleanup tool to remove them all Finished the uninstall and then restarted Reboot Attempt a manual install NETFX cannot be installed error code I tried and tried and tried and tried but nothing Finally I just gave up I still use the computer everyday but the errors are piling up Little things not working anymore and performance has taken a pretty major hit The only resolve I could find if the previous steps didn't work is to format and install That's not really an option My hard drives are sorted and there's pieces all over There's well over applications that I CONSISTENTLY use and many are LARGE and would take DAYS o re-install I didn't then nor do I now have the time to do that I realize my options are cut really short at this point but I'm wondering what all my options are I need the registry to stay mostly in tact I thought about upgrading to windows which I'd rather not do in hopes it would resolve it but I'm really not an fan Not hating for those that do but I like The other option I heard was an overlay install Essentially using the install disc to quot upgrade quot over the OS I like this option but it seems certain information doesn't transfer though I haven't clearly understood what does and what doesn't get transferred The last options are slim Somehow figure out how to fix the update process or magically hope start up repair will resolve Thanks to anyone who read this wall of text and thanks in advance if anyone responds I love my computer almost to a crazy level but I'm almost to a point of unplugging it and walking away I hope someone has an answer Has anyone else had similar issues Were you able to resolve it I could include my windows log files but some are miles long from other issues WU gaves the same error for all failed updates Error Code SURT has been stuck at around for quot Installing Hotfix for Windows KB update of quot

A:Multiple .NETFX Updates Failed: Error Code 643

Here's the summary from your SFC data....

Code:
2013-12-02 00:27:16, Info CSI 00000355 [SR] Repairing 9 components
2013-12-02 00:27:16, Info CSI 00000356 [SR] Beginning Verify and Repair transaction
2013-12-02 00:27:16, Info CSI 00000358 [SR] Cannot repair member file [l:20{10}]"comuid.dll" of Microsoft-Windows-COM-ComPlus-UI-COMUID, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2013-12-02 00:27:16, Info CSI 0000035a [SR] Cannot repair member file [l:22{11}]"mspaint.exe" of Microsoft-Windows-mspaint, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2013-12-02 00:27:16, Info CSI 0000035c [SR] Repairing corrupted file [ml:520{260},l:88{44}]"\??\C:\Program Files (x86)\Internet Explorer"\[l:14{7}]"pdm.dll" from store
2013-12-02 00:27:16, Info CSI 0000035e [SR] Repairing corrupted file [ml:520{260},l:88{44}]"\??\C:\Program Files (x86)\Internet Explorer"\[l:20{10}]"msdbg2.dll" from store
2013-12-02 00:27:16, Info CSI 00000362 [SR] Repairing corrupted file [ml:520{260},l:76{38}]"\??\C:\Program Files\Internet Explorer"\[l:14{7}]"pdm.dll" from store
2013-12-02 00:27:16, Info CSI 00000364 [SR] Repairing corrupted file [ml:520{260},l:76{38}]"\??\C:\Program Files\Internet Explorer"\[l:20{10}]"msdbg2.dll" from store
2013-12-02 00:27:16, Info CSI 00000368 [SR] Repairing corrupted file [ml:48{24},l:46{23}]"\??\C:\Windows\SysWOW64"\[l:22{11}]"iesetup.dll" from store
2013-12-02 00:27:16, Info CSI 0000036a [SR] Repairing corrupted file [ml:48{24},l:46{23}]"\??\C:\Windows\SysWOW64"\[l:22{11}]"ieuinit.inf" from store
2013-12-02 00:27:16, Info CSI 0000036c [SR] Repairing corrupted file [ml:48{24},l:46{23}]"\??\C:\Windows\SysWOW64"\[l:24{12}]"iernonce.dll" from store
2013-12-02 00:27:16, Info CSI 00000371 [SR] Cannot repair member file [l:20{10}]"comuid.dll" of Microsoft-Windows-COM-ComPlus-UI-COMUID, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2013-12-02 00:27:16, Info CSI 00000372 [SR] This component was referenced by [l:202{101}]"Microsoft-Windows-Foundation-Package~31bf3856ad364e35~amd64~~6.1.7601.17514.WindowsFoundationDelivery"
2013-12-02 00:27:16, Info CSI 00000375 [SR] Could not reproject corrupted file [ml:48{24},l:46{23}]"\??\C:\Windows\SysWOW64"\[l:20{10}]"comuid.dll"; source file in store is also corrupted
2013-12-02 00:27:16, Info CSI 00000377 [SR] Cannot repair member file [l:22{11}]"mspaint.exe" of Microsoft-Windows-mspaint, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2013-12-02 00:27:16, Info CSI 00000378 [SR] This component was referenced by [l:202{101}]"Microsoft-Windows-Foundation-Package~31bf3856ad364e35~amd64~~6.1.7601.17514.WindowsFoundationDelivery"
2013-12-02 00:27:16, Info CSI 0000037b [SR] Could not reproject corrupted file [ml:48{24},l:46{23}]"\??... Read more

http://www.sevenforums.com/windows-updates-activation/313724-multiple-netfx-updates-failed-error-code-643-a.html
Relevancy 104.06%

Good Afternoon,

I am also having problems installing updates with the error code 80070308.

I have spent this afternoon reading the other posts and following the Windows Update Posting Instructions thread so hopefully I've gathered has much info as I can.

I downloaded and ran the System Update Readiness Tool. Once the installation was complete I tried to reinstall the updates. This resulted in the successful installation of: Hotfix for Windows (KB947821) but the failed installation of the other 9 updates as before.

Attachment 325390

And I received the following error code.

Attachment 325391

I then carried out the sfc/scannow which all came back OK.

Attachment 325392

I have saved the logs as a zip file but its too big for me to upload (12.5MB)? Any suggestions?

I hope I have not missed anything out. But please bear with me if I have.

Any help/advice would be appreciated.

Thanks in advance.

Kerry

A:Failed to install updates: Error Code 80070308

This is becoming a common problem with the latest batch of updates - MS are looking into it (we are led to understand)
I'll add this thread to the action-list for our contact.

http://www.sevenforums.com/windows-updates-activation/337797-failed-install-updates-error-code-80070308-a.html
Relevancy 104.06%

Hello I can't do any windows updates they all fail with Error 0x80070005 code failed Microsoft error updates Code x Having read another post I am pretty sure I am infected but the post was closed so I apologize I don't know how to fix the problem THANKS IN ADVANCE I also can't boot into safe mode without getting the blue screen of death A problem has been detected and windows has been shut down to prevent damage to your computer STOP Microsoft updates failed error code 0x80070005 x B xF A xC x x When I boot up Normal I get the following error c DOCUME LWP LOCALS Temp exe Windows cannot find 'c DOCUME LWP LOCALS Temp exe' Make sure you typed the name correctly and then try again To search for a file click the start button and then click Search I have already updated and ran McAfee Spybot Ad-Aware and CClaner Each one cleaned up some files but I still can't do windows updates or boot into safe mode et DDS Ver - - - NTFSx Run by LWP at on Fri Internet Explorer Microsoft Windows XP Home Edition GMT - AV McAfee VirusScan On-access scanning enabled Updated B EE - - CDE-A A-DD BA FAD FW McAfee Personal Firewall enabled B - C F- -BDA - CA DA E Running Processes C WINDOWS system svchost -k DcomLaunch svchost exe C WINDOWS System svchost exe -k netsvcs C Program Files Intel Wireless Bin EvtEng exe C Program Files Intel Wireless Bin S EvMon exe C Program Files Intel Wireless Bin WLKeeper exe svchost exe svchost exe C Program Files Lavasoft Ad-Aware AAWService exe C WINDOWS system spoolsv exe C Program Files Intel Wireless Bin ZcfgSvc exe C WINDOWS Explorer exe C PROGRA Intel Wireless Bin XConfig exe svchost exe C Program Files Common Files Apple Mobile Device Support bin AppleMobileDeviceService exe C Program Files Bonjour mDNSResponder exe C WINDOWS system cisvc exe C Program Files Java jre bin jqs exe C Program Files Kodak printer center KodakSvc exe C Program Files McAfee SiteAdvisor McSACore exe C Program Files Dell QuickSet quickset exe C Program Files Synaptics SynTP SynTPEnh exe C WINDOWS stsystra exe C PROGRA McAfee MSC mcmscsvc exe c PROGRA COMMON mcafee mna mcnasvc exe C Program Files McAfee com Agent mcagent exe C Program Files Common Files InstallShield UpdateService issch exe c PROGRA COMMON mcafee mcproxy mcproxy exe C Program Files Intel Wireless Bin ifrmewrk exe C PROGRA McAfee VIRUSS mcshield exe C WINDOWS system igfxpers exe C Program Files Common Files Microsoft Shared VS DEBUG MDM EXE C Program Files Microsoft Office Office GrooveMonitor exe C Program Files CyberLink PowerDVD DVDLauncher exe C Program Files McAfee MPF MPFSrv exe C WINDOWS system dla tfswctrl exe C Program Files McAfee MSK MskSrver exe C WINDOWS system igfxsrvc exe C Program Files Microsoft SQL Server MSSQL MICROSOFTSMLBIZ Binn sqlservr exe C Program Files Common Files AOL ee AOLSoftware exe C Program Files Dell QuickSet NICCONFIGSVC exe C Program Files Java jre bin jusched exe C WINDOWS system ctfmon exe C Program Files Intel Wireless Bin RegSrvc exe C Program Files Dell Support Center bin sprtsvc exe C WINDOWS system svchost exe -k imgsvc C Program Files Messenger msmsgs exe C WINDOWS wanmpsvc exe C Program Files Microsoft SQL Server MSSQL MICROSOFTSMLBIZ Binn sqlagent EXE C PROGRA McAfee VIRUSS mcsysmon exe C Program Files Lavasoft Ad-Aware AAWTray exe C WINDOWS system cidaemon exe C Program Files Internet Explorer IEXPLORE EXE C Program Files Internet Explorer IEXPLORE EXE C Program Files Internet Explorer IEXPLORE EXE C Program Files Internet Explorer IEXPLORE EXE C Program Files Internet Explorer IEXPLORE EXE C Documents and Settings LWP Local Settings Temporary Internet Files Content IE B MHWJ dds scr Pseudo HJT Report uStart Page hxxp www aol com src toolbar uSearch Page about blank uSearch Bar about blank uDefault Page URL www google com ig dell hl en amp client dell-usuk amp channel us amp ibd uDefault Search URL about blank uSearchMigratedDefaultURL a f f e f f c e f d f mSearch Bar about blank mSearchMigratedDefaultURL a f f e f f c e f d f... Read more

A:Microsoft updates failed error code 0x80070005

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine.??If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.Upon completing the steps below another staff member will review and take the steps necessary with you to get your machine back in working order clean and free of malware.If you have already posted a DDS log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.Thanks and again sorry for the delay.We need to see some information about what is happening in your machine.??Please perform the following scan:Download DDS by sUBs from one of the following links.??Save it to your desktop.DDS.scrDDS.pifDouble click on the DDS icon, allow it to run.A small box will open, with an explanation about the tool.??No input is needed, the scan is running.Notepad will open with the results.Follow the instructions that pop up for posting the results.Close the program window, and delete the program from your desktop.Please note:??You may have to disable any script protection running if the scan fails to run.??After downloading the tool, disconnect from the internet and disable all antivirus protection.??Run the scan, enable your A/V and reconnect to the internet.??Information on A/V control HERE

http://www.bleepingcomputer.com/forums/t/274407/microsoft-updates-failed-error-code-0x80070005/
Relevancy 101.91%

I have a HP DM W - Bit notebook PC I'm a very techy person and keep the machine very Code Feb-2013 80070057 KB2799494 Failed, Error W7-64bit Updates; clean I run Avast for A V protection run MalwareBytes from time-to-time to check too and both are clean The machine's use is for MS Office mostly Outlook with some web surfing I even use CCLeaner to keep the temp clutter out Yesterday MS released a bunch of updates W7-64bit Feb-2013 Updates; KB2799494 Failed, Error Code 80070057 and I have never had any issue installing before All updates installed except KB MS - Vulnerabilities in Windows kernel could allow elevation of privilege February It gave me error code so I downloaded MSI and ran on PC same error Download Security Update for Windows for x -based Systems KB from Official Microsoft Download Center I did some web surfing and not much out there on it update error code - Microsoft Community For the above I did run SFC SCANNOW and came back OK I even found this link through another thread that had the error referenced and recalled on other machines in past that NET Framework could be corrupted and cause issues The KB does not seem to be associated W7-64bit Feb-2013 Updates; KB2799494 Failed, Error Code 80070057 but I tried the MSI FIXIT and also NET repair steps no change still fails Error codes I do have Horzion RollBack RX on the machine but usually only keep a week of so of previous snapshots I also religiously image my HDD with Macrium Reflect I mention the RX install because I can set a restore point and try suggestions and return to prior state W7-64bit Feb-2013 Updates; KB2799494 Failed, Error Code 80070057 very easily So I am at my wits end on where to even start please provide suggestions Your help is most appreciated Regards Eric

A:W7-64bit Feb-2013 Updates; KB2799494 Failed, Error Code 80070057

Try to install patch again

Make a copy of C:\Windows\Logs\CBS\CBS.log (otherwise you can't open it)
Post that file and C:\Windows\WindowsUpdate.log as well

Zip them to make it smaller

http://www.sevenforums.com/windows-updates-activation/278301-w7-64bit-feb-2013-updates-kb2799494-failed-error-code-80070057-a.html
Relevancy 101.48%

Hi guys,
I am trying to get my microhpone to work, and it doesnt anymore, it's definately not the mic as i have tested it on another comp, but it won't work on this one.

I'm running a Soundblaster Live! 24-bit sound card on windows XP SP2 , and the Creative Game Port has a Yellow- (!) next to it with an error code 10.

Anyone know how to fix it? Or why it does this....

I tried re-installing drivers, changing the sound card to a different PCI slot, and disable the on-board audio, on my Asus A7V600.

Thanks
 

A:Error Code 10, Device failed to start...

Here is what I found on the code, but from what I have read, it doesn't sound as if it will help any:

Code 10

If the device has a "FailReasonString" value in its hardware key, that string is displayed as the error message. The driver or enumerator places this registry string value there. If there is no "FailReasonString" in the hardware key, the following generic error message is displayed:
This device is either not present, not working properly, or does not have all the drivers installed. (Code 10)

Try upgrading the device drivers for this device.
Solution button: Update Driver

To resolve this error code, make sure the device is connected to the computer correctly. For example, make sure all cables are plugged in fully and that all adapter cards are properly seated. Follow the suggested solution button and update the device driver. It may be possible to remove the device and redetect it using the Add New Hardware wizard.
Click to expand...
 

https://forums.techguy.org/threads/error-code-10-device-failed-to-start.491791/
Relevancy 98.9%

I've tried running many programs to fix this these problems Nothing is showing up in the scans I'm getting background audio failed audio Background windows code updates 80070216 - ads ads that are caused be a svchost exe process Killing the process stops the audio for a few minutes untile the process restarts itself I also have some windows updates that are failing with code DDS Ver - - - NTFS AMD Internet Explorer BrowserJavaVersion Run by Dodiyah at on - - Microsoft Windows Home Premium GMT - AV Background audio ads - failed windows updates code 80070216 McAfee Anti-Virus and Anti-Spyware Enabled Updated ADA C - F - - A- B E SP McAfee Anti-Virus and Anti-Spyware Enabled Updated C C - - - FA- E F F SP Windows Defender Enabled Updated D DDC A- F- fae- E -DA C ACF FW McAfee Firewall Enabled DA E - - D - - AD FE Running Processes C Windows system lsm exe C Windows system svchost exe -k DcomLaunch C Windows system nvvsvc exe Background audio ads - failed windows updates code 80070216 C Program Files x NVIDIA Corporation D Vision nvSCPAPISvr exe C Windows system svchost exe -k RPCSS C Windows system atiesrxx exe C Windows System svchost exe -k LocalServiceNetworkRestricted C Windows System svchost exe -k LocalSystemNetworkRestricted C Windows system svchost exe -k LocalService C Windows system svchost exe -k netsvcs C Program Files IDT WDM STacSV exe C Program Files x Common Files logishrd LVMVFM UMVPFSrv exe Background audio ads - failed windows updates code 80070216 C Windows system svchost exe -k NetworkService C Windows system WLANExt exe C Windows system taskeng exe C Windows System spoolsv exe C Windows system svchost exe -k LocalServiceNoNetwork C Program Files x Common Files EPSON EBAPI eEBSVC exe C Program Files IDT WDM AESTSr exe C Program Files EPSON EpsonCustomerParticipation EPCP exe C Program Files Hewlett-Packard HP Client Services HPClientServices exe C Program Files x Malwarebytes' Anti-Malware mbamscheduler exe C Program Files x Malwarebytes' Anti-Malware mbamservice exe C Program Files Common Files McAfee McSvcHost McSvHost exe C Windows system mfevtps exe C Program Files x PDF Complete pdfsvc exe C Windows SysWOW rundll exe C Windows system rundll exe C Program Files x Microsoft Application Virtualization Client sftvsa exe C Program Files Western Digital WD SmartWare WD Drive Manager WDDMService exe C Program Files x Western Digital WD SmartWare Front Parlor WDFME WDFME exe C Program Files x Western Digital WD SmartWare Front Parlor WDSC exe C Windows System svchost exe -k secsvcs C Program Files Common Files Microsoft Shared Windows Live WLIDSVC EXE C Program Files Common Files Microsoft Shared Windows Live WLIDSvcM exe C Program Files McAfee MSC McAPExe exe C Program Files Common Files McAfee AMCore mcshield exe C Program Files Common Files McAfee SystemCore mfefire exe C Program Files x Microsoft Application Virtualization Client sftlist exe C Program Files Common Files McAfee Platform McSvcHost McSvHost exe C Program Files x Common Files Microsoft Shared Virtualization Handler CVHSVC EXE C Windows system svchost exe -k NetworkServiceNetworkRestricted C Windows system svchost exe -k LocalServiceAndNoImpersonation C Windows System WUDFHost exe C Windows system atieclxx exe C Program Files NVIDIA Corporation Display nvxdsync exe C Windows system nvvsvc exe C Program Files x Hewlett-Packard TouchSmart Calendar Service GCalService exe C Program Files x Hewlett-Packard HP Support Framework hpsa service exe C Program Files x Common Files Intuit Update Service v IntuitUpdateService exe C Windows system SearchIndexer exe C PROGRA MICROS Office OUTLOOK EXE svchost exe C Windows system taskhost exe C Program Files x Malwarebytes' Anti-Malware mbamgui exe C Windows system Dwm exe C Windows Explorer EXE C Program Files x Hewlett-Packard HP Odometer hpsysdrv exe C Program Files IDT WDM beats exe C Program Files Microsoft IntelliPoint ipoint exe C Program Files Microsoft IntelliType Pro itype exe C Program Files x NVIDIA ... Read more

A:Background audio ads - failed windows updates code 80070216

Hello rradavich I would like to welcome you to the Malware Removal section of the forum.Around here they call me Gringo and I will be glad to help you with your malware problems.Very Important --> Please read this post completely, I have spent my time to put together somethings for you to keep in mind while I am helping you to make things go easier, faster and smoother for both of us!Please do not run any tools unless instructed to do so.We ask you to run different tools in a specific order to ensure the malware is completely removed from your machine, and running any additional tools may detect false positives, interfere with our tools, or cause unforeseen damage or system instability.Please do not attach logs or use code boxes, just copy and paste the text.Due to the high volume of logs we receive it helps to receive everything in the same format, and code boxes make the logs very difficult to read. Also, attachments require us to download and open the reports when it is easier to just read the reports in your post.Please read every post completely before doing anything.Pay special attention to the NOTE: lines, these entries identify an individual issue or important step in the cleanup process.Please provide feedback about your experience as we go.A short statement describing how the computer is working helps us understand where to go next, for example: I am still getting redirected, the computer is running normally, etc. Please do not describe the computer as "the same", this requires the extra step of looking back at your previous post.NOTE: At the top of your post, click on the "Follow This Topic" Button, make sure that the "Receive notification" box is checked and that it is set to "Instantly" - This will send you an e-mail as soon as I reply to your topic, allowing us to resolve the issue faster.NOTE: Backup any files that cannot be replaced. Removing malware can be unpredictable and this step can save a lot of heartaches if things don't go as planed. You can put them on a CD/DVD, external drive or a pen drive, anywhere except on the computer.NOTE: It is good practice to copy and paste the instructions into notepad and print them in case it is necessary for you to go offline during the cleanup process. To open notepad, navigate to Start Menu > All Programs > Accessories > Notepad. Please remember to copy the entire post so you do not miss any instructions..I would like you to run this program for me.Please download Farbar Recovery Scan Tool and save it to your desktop.Note: You need to run the version compatibale with your system. If you are not sure which version applies to your system download both of them and try to run them. Only one of them will run on your system, that will be the right version.Double-click to run it. When the tool opens click Yes to disclaimer.Press Scan button.It will make a log (FRST.txt) in the same directory the tool is run. Please copy and paste it to your reply.The first time the tool is run, it makes also another log (Addition.txt). Please attach it to your reply..I would also like to get some extra information on one of the files on the computerRun FRST like you did before and Type the following in the edit box after "Search:".rpcss.dllIt then should look like:Search: rpcss.dllClick Search button and post the log (Search.txt) it makes to your reply.Gringo

http://www.bleepingcomputer.com/forums/t/531326/background-audio-ads-failed-windows-updates-code-80070216/
Relevancy 95.46%

Hello Windows has been failing to boot and when I ran a startup repair I got the following Problem signature Problem Event Name StartupRepairOffline Problem Signature Problem Signature Problem Signature unknown Problem Signature Problem Signature AutoFailover Problem Signature Problem Signature BadDriver OS Version Locale ID No new devices have been added to this computer recently Problem first started with extremely long boot time into Windows FRST Report shows Scan result of Farbar Recovery Scan Tool FRST x Version - - Ran by SYSTEM on Start Offline Driver Failed To Startup Failed Bad Windows Repair 7 MININT-DP NLO - - Running from g Platform Windows Professional Service Pack X Language English United States Internet Explorer Version Boot Mode Recovery Default ControlSet ATTENTION gt If the system is bootable FRST must be run from normal or Safe mode to create a complete log Tutorial for Farbar Recovery Scan Tool http www geekstogo com forum topic -frst-tutorial-how-to-use-farbar-recovery-scan-tool Registry Whitelisted If an entry is included in the fixlist Windows 7 Failed To Start Startup Repair Failed Offline Bad Driver the registry item will be Windows 7 Failed To Start Startup Repair Failed Offline Bad Driver restored to default or removed The file will Windows 7 Failed To Start Startup Repair Failed Offline Bad Driver not be moved HKLM Run RTHDVCPL gt C Program Files Realtek Audio HDA RtkNGUI exe - - Realtek Semiconductor HKLM Run RtHDVBg gt C Program Files Realtek Audio HDA RAVBg exe - - Realtek Semiconductor HKLM Run IAStorIcon gt C Program Files Intel Intel reg Rapid Storage Technology IAStorIcon exe - - Intel Corporation HKLM Run AtherosBtStack gt C Program Files x Dell Wireless Bluetooth Suite btvstack exe - - Atheros Commnucations HKLM Run AthBtTray gt C Program Files x Dell Wireless Bluetooth Suite athbttray exe - - Atheros Commnucations HKLM Run MSC gt c Program Files Microsoft Security Client msseces exe - - Microsoft Corporation HKLM-x Run USB MON gt C Program Files x Intel Intel reg USB eXtensible Host Controller Driver Application iusb mon exe - - Intel Corporation HKLM-x Run Client Access Service gt C Program Files x IBM Client Access cwbsvstr exe - - IBM Corporation HKLM-x Run C Program Files x D-Link D-ViewCam MainConsole EXE gt C Program Files x D-Link D-ViewCam MainConsole exe - - D-Link Corporation HKLM-x Run APSDaemon gt C Program Files x Common Files Apple Apple Application Support APSDaemon exe - - Apple Inc HKLM-x Run ScanSnap WIA Service Checker gt C Windows SSDriver fi SsWiaChecker exe HKLM-x Run HP Software Update gt C Program Files x Hp HP Software Update HPWuSchd exe - - Hewlett-Packard HKLM-x Run gt X HKLM-x Run StatusAlerts gt C Program Files x HP StatusAlerts bin HPStatusAlerts exe - - Hewlett-Packard Company HKLM-x Run iTunesHelper gt C Program Files x iTunes iTunesHelper exe - - Apple Inc HKLM-x Run EEventManager gt C Program Files x EPSON Creativity Suite Event Manager EEventManager exe - - SEIKO EPSON CORPORATION Winlogon Notify GoToAssist Express Customer C Program Files x Citrix GoToAssist Remote Support Customer g ax winlogonx dll Citrix Online a division of Citrix Systems Inc Services Whitelisted If an entry is included in the fixlist it will be removed from the registry The file will not be moved unless listed separately S Cwbrxd C Windows cwbrxd exe - - IBM Corporation S GoToAssist Remote Support Customer C Program Files x Citrix GoToAssist Remote Support Customer g ax service exe - - Citrix Online a division of Citrix Systems Inc S HP DS Service C Program Files x HP HPBDSService HPBDSService exe - - Hewlett-Packard Company S IAStorDataMgrSvc C Program Files Intel Intel reg Rapid Storage Technology IAStorDataMgrSvc exe - - Intel Corporation S IconMan R C Program Files x Realtek Realtek USB Card Reader RIconMan exe - - Realsil Microelectronics Inc S MsMpSvc c Program Files Microsoft Security Client MsMpEng exe - - Microsoft Corporation S NisSrv c Program Files Microsoft Security C... Read more

http://www.bleepingcomputer.com/forums/t/599441/windows-7-failed-to-start-startup-repair-failed-offline-bad-driver/
Relevancy 95.03%

automatic microsoft update continued to fail on everyday from Feb 16th and today i tried to do manual update [Microsoft .NET Framework 2.0 Service Pack 1 (KB110806)]. I received a error:Error Code: 0x80246008.

The Microsoft Help asked me to start BITS (Background Intelligent Transfer Service) and I received an "cannot start the Background Intelligent Transfer Service on Local Computer. Error 126: The specified module couldnot be found"

Please help me. What I can do to resolve this error? I am actually using Win XP (servicepack 2). why the update is installing servicepack 1?
 

Relevancy 94.17%
A:Failed to schedule Software Protection service for re-start at 2113-01-12T17:08:03Z. Error Code: 0x80041316 every few seconds.

Delete the 3 files from C:\Windows\System32\Tasks\Microsoft\Windows\SoftwareProtectionPlatform.
From the Windows DVD or ISO file go to Sources and use 7-ZIP to extract the install.wim file.
Copy the 3 original files from extracted install.wim (Windows\System32\Tasks\Microsoft\Windows\SoftwareProtectionPlatform) to a suitable location and add to each of them the .xml extension.
Import the 3 .xml files in Task Scheduler - Microsoft - Windows - SoftwareProtectionPlatform and restart the system.
Hope it helps!
Dan Visan

https://social.technet.microsoft.com/Forums/en-US/3bd4309d-4eaa-469a-9fc5-1554ac0f6246/failed-to-schedule-software-protection-service-for-restart-at-21130112t170803z-error-code?forum=w8itprogeneral
Relevancy 92.45%

I forgot to turn off the external cooling fan when closing the laptop(putting it to sleep). It eventually drain the battery and didn't hibernate gracefully & caused disk error. 1. Win 7 Home premium couldn't boot up, tried repair & just hang. 2. Diagnostic disk check shows 303 error, which means the disk is toasted. Ordering new disk. 3. I have the HP recovery disks but they are not bootable. All the other recovery solutions rely on running recovery manager but I can't even load windows. 4. I tried to find win 7 iso file but they are no longer available or the OEM product key won't let me download one from microsoft.http://www.mydigitallife.info/official-windows-7-sp1-iso-from-digital-river/https://www.microsoft.com/en-us/software-download/windows7 5. I have backup all the important files using Paragon so I am ready to wipe the disk clean. What should I do next to reinstall the system?

http://h30434.www3.hp.com/t5/Notebook-Operating-System-and-Recovery/Windows-7-failed-to-start-amp-repair-failed/td-p/5683122
Relevancy 92.02%

I recently did a factory restore to get rid of some malware and now for some reason updates aren't going through properly.
Everytime i shut down my computer i have 85 updates and they all fail except two.
But the error code is Code 80071A2D

Almost all the updates are Security updates.

A:Windows Failed update Error code 80071A2D

Please follow the Windows Update Posting Instructions and post the requested data
If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CBA files, for a number of reasons)

http://www.sevenforums.com/windows-updates-activation/332754-windows-failed-update-error-code-80071a2d.html
Relevancy 92.02%

I have recently updated my preloaded window to However after the update it does not accept Windows 8 Failed: 0xC004C003 Code Activation 8.1 Error & my old window key and requires me to activate again using a product key Here is the error code xC C My nbsp DELL XPS nbsp came with a preloaded copy of window and yes it has a window sticker at the back and was fully activated before I updated to windows nbsp nbsp And as far as I know system which comes with preloaded Windows 8 & 8.1 Activation Failed: Error Code 0xC004C003 window has its product key injected to the nbsp motherboard and is a free update for window users So why the update does not accept my window key and ask me for a new key I know my window key cannot be used for any other system because the key is injected in the motherboard and I don t even know the key myself So what can I do now for my Window to be activated again More frustration is that I can t get back to windows I tried to reset to the factory image by using DELL backup amp Recovery software built in the system However after resetting to the factory image it does not accept embedded product key nbsp Here is nbsp details from the Diag Report nbsp lt DiagReport gt lt LicensingData gt nbsp lt ToolVersion gt lt ToolVersion gt nbsp lt LicensingStatus gt SL LICENSING STATUS NOTIFICATION lt LicensingStatus gt nbsp lt LicensingStatusReason gt xC F lt LicensingStatusReason gt nbsp lt LocalGenuineState gt SL GEN STATE INVALID LICENSE lt LocalGenuineState gt nbsp lt LocalGenuineResultP gt lt LocalGenuineResultP gt nbsp lt LastOnlineGenuineResult gt lt LastOnlineGenuineResult gt nbsp lt GraceTimeMinutes gt lt GraceTimeMinutes gt nbsp lt TotalGraceDays gt lt TotalGraceDays gt nbsp lt ValidityExpiration gt lt ValidityExpiration gt nbsp lt ActivePartialProductKey gt T lt ActivePartialProductKey gt nbsp lt ActiveProductKeyPid gt - - -AAOEM lt ActiveProductKeyPid gt nbsp lt OSVersion gt lt OSVersion gt nbsp lt ProductName gt Windows lt ProductName gt nbsp lt ProcessorArchitecture gt x lt ProcessorArchitecture gt nbsp lt EditionId gt Core lt EditionId gt nbsp lt BuildLab gt win gdr - lt BuildLab gt nbsp lt TimeZone gt Pacific Standard Time GMT- lt TimeZone gt nbsp lt ActiveSkuId gt e b b- e - f - f-c f b ac lt ActiveSkuId gt nbsp lt ActiveSkuDescription gt Windows R Operating System OEM DM channel lt ActiveSkuDescription gt nbsp lt ProductUniquenessGroups gt c -d - d - e-d ec f f lt ProductUniquenessGroups gt nbsp lt ActiveProductKeyPKeyId gt ebfad c-bf e-b - -af a e lt ActiveProductKeyPKeyId gt nbsp lt ActiveProductKeyPidEx gt - - - - - - - lt ActiveProductKeyPidEx gt nbsp lt ActiveProductKeyChannel gt OEM DM lt ActiveProductKeyChannel gt nbsp lt ActiveVolumeCustomerPid gt lt ActiveVolumeCustomerPid gt nbsp lt OfflineInstallationId gt lt OfflineInstallationId gt nbsp lt DomainJoined gt false lt DomainJoined gt nbsp lt ComputerSid gt S- - - - - - lt ComputerSid gt nbsp lt ProductLCID gt lt ProductLCID gt nbsp lt UserLCID gt lt UserLCID gt nbsp lt SystemLCID gt lt SystemLCID gt nbsp lt CodeSigning gt SIGNED INFO PRS SIGNED lt CodeSigning gt nbsp lt ServiceAvailable gt true lt ServiceAvailable gt nbsp lt OemMarkerVersion gt x lt OemMarkerVersion gt nbsp lt OemId gt DELL nbsp lt OemId gt nbsp lt OemTableId gt AS nbsp nbsp lt OemTableId gt nbsp lt Manufacturer gt Dell Inc lt Manufacturer gt nbsp lt Model gt XPS One lt Model gt nbsp lt InstallDate gt - lt InstallDate gt lt LicensingData gt lt HealthCheck gt nbsp lt Result gt PASS lt Result gt nbsp lt TamperedItems gt lt TamperedItems gt lt HealthCheck gt lt GenuineAuthz gt nbsp lt ServerProps gt xc f lt ServerProps gt lt GenuineAuthz gt lt DiagReport gt

A:Windows 8 & 8.1 Activation Failed: Error Code 0xC004C003

Successfully activated Windows 8.1 after installed the latest version of BIOS.

http://en.community.dell.com/support-forums/software-os/f/4677/t/19537852
Relevancy 92.02%

Ran SFC /Scannow, it completed with a message that "Windows Resource Protection did not find any integrity violation".
Downloaded and tried installing the System Update Readiness tool but it failed to install.
Stopped Windows Update service and renamed Software Distribution folder, tried again but no good.
Other updates are installing fine without any error.

https://social.technet.microsoft.com/Forums/en-US/e91b0c88-0b32-4dee-94c3-3fff3a078ba2/windows-7-x86-sp1-failed-to-install-with-error-code-8024200d?forum=w7itproinstall
Relevancy 92.02%

I have been trying to update windows 7 for a few days now and i have been getting the same error message over and over again. I only have 1 important update left and like 10 optional updates. The important update is KB295664, and most of the optional ones are similar. I tried to repair network frame and nothing

A:Windows Failed to update,Error code 80070643

Please follow the Windows Update Posting Instructions and post the requested data

If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

Please also post the C:\Windows\windowsudpate.log file

http://www.sevenforums.com/windows-updates-activation/377744-windows-failed-update-error-code-80070643-a.html
Relevancy 92.02%

I've been getting the 9C59 error for a while with the Windows automatic updater. I've attempted a manual update of IE 10, but had the same error. Not sure where to go from here.

I've attached the CBS file.

Thanks.

Dennis

A:IE 10 Update Failed - Windows 7 - Error Code 9C59

CheckSUR found and fixed a large number of errors - but there are still a couple of errors remaining, which it may be able to fix if you run the tool a second time. Please post (just) the new CheckSUR.log file afterwards.

There are a couple of errors in the CBS.log which may relate to the errors outstanding in the CheckSUR - so we need to get those fixed first, and only then see if it's affected the SFC/CBS results.

http://www.sevenforums.com/windows-updates-activation/296411-ie-10-update-failed-windows-7-error-code-9c59.html
Relevancy 92.02%

hello about a month I have a problem - code 8000ffff Update error Windows failed with the updates of windows professional bit When I turn on the PC Windows tries to install an Windows Update failed - code error 8000ffff update it hangs at and the pc restarts times before using it after if I click on search updates I have error code ffff I tried microsoft fixit but I Windows Update failed - code error 8000ffff have not resolved this is the file of MGA please help me I'm going crazy Code Diagnostic Report ----------------------------------------- Windows Validation Data-- gt Validation Code Cached Online Validation Code x Windows Product Key - - - -XFPHJ Windows Product Key Hash FjeWkdSWrMt bkVKGJPOMAaHKUo Windows Product ID - - - Windows Product ID Type Windows License Type Volume MAK Windows OS version ID B A - F- E - C -F F FBD Is Admin Yes TestCab x LegitcheckControl ActiveX N A hr x Signed By N A hr x Product Name Windows Professional Architecture x Build lab win sp gdr - TTS Error Validation Diagnostic Resolution Status N A Vista WgaER Data-- gt ThreatID s N A hr x Version N A hr x Windows XP Notifications Data-- gt Cached Result N A hr x File Exists No Version N A hr x WgaTray exe Signed By N A hr x WgaLogon dll Signed By N A hr x OGA Notifications Data-- gt Cached Result N A hr x Version N A hr x OGAExec exe Signed By N A hr x OGAAddin dll Signed By N A hr x OGA Data-- gt Office Status Blocked VLK Microsoft Office Enterprise - Blocked VLK OGA Version N A x Signed By N A hr x Office Diagnostics D FF - - D FF - - D FF - - D FF - - D FF - - D FF - - D FF - - D FF - - Browser Data-- gt Proxy settings N A User Agent Mozilla compatible MSIE Win Default Browser C Users UnoCheScassa AppData Local Google Chrome Application chrome exe Download signed ActiveX controls Prompt Download unsigned ActiveX controls Disabled Run ActiveX controls and plug-ins Allowed Initialize and script ActiveX controls not marked as safe Disabled Allow scripting of Internet Explorer Webbrowser control Disabled Active scripting Allowed Script ActiveX controls marked as safe for scripting Allowed File Scan Data-- gt Other data-- gt Office Details lt GenuineResults gt lt MachineData gt lt UGUID gt B A - F- E - C -F F FBD lt UGUID gt lt Version gt lt Version gt lt OS gt lt OS gt lt Architecture gt x lt Architecture gt lt PKey gt - - - -BBBBB lt PKey gt lt PID gt - - - lt PID gt lt PIDType gt lt PIDType gt lt SID gt S- - - - - - lt SID gt lt SYSTEM gt lt Manufacturer gt Acer lt Manufacturer gt lt Model gt Aspire lt Model gt lt SYSTEM gt lt BIOS gt lt Manufacturer gt Phoenix Technologies LTD lt Manufacturer gt lt Version gt V lt Version gt lt SMBIOSVersion major quot quot minor quot quot gt lt Date gt lt Date gt lt BIOS gt lt HWID gt DA FA lt HWID gt lt UserLCID gt lt UserLCID gt lt SystemLCID gt lt SystemLCID gt lt TimeZone gt W Europe Standard Time GMT lt TimeZone gt lt iJoin gt lt iJoin gt lt SBID gt lt stat gt lt stat gt lt msppid gt lt msppid gt lt name gt lt name gt lt model gt lt model gt lt SBID gt lt OEM gt lt OEMID gt ACRSYS lt OEMID gt lt OEMTableID gt ACRPRDCT lt OEMTableID gt lt OEM gt lt GANotification gt lt MachineData gt lt Software gt lt Office gt lt Result gt lt Result gt lt Products gt lt Product GUID quot - - - - FF CE quot gt lt LegitResult gt lt LegitResult gt lt Name gt Microsoft Office Enterprise lt Name gt lt Ver gt lt Ver gt lt Val gt ACD E lt Val gt lt Hash gt fFic JgCreGGRxyF uMWB R Jcg lt Hash gt lt Pid gt - - - lt Pid gt lt PidType gt lt PidType gt lt Product gt lt Products gt lt Applications gt lt App Id quot quot Version quot quot Result quot quot gt lt App Id quot quot Version quot quot Result quot quot gt lt App Id quot quot Version quot quot Result quot quot gt lt App Id quot quot Version quot quot Result quot quot gt lt App Id quot A quot Version quot quot Result quot quot gt lt App Id quot B quot Version quot quot Result quot quot gt lt App Id quot quot Version quot quot Result quot quot gt lt App Id quot A quot Version qu... Read more

A:Windows Update failed - code error 8000ffff

Open Regedit, - File - Export - save to desktop ( creates backup of your current registery

Then locate and remove:

HKEY_LOCAL_MACHINE\COMPONENTS\PendingXmlIdentifier
HKEY_LOCAL_MACHINE\COMPONENTS\NextQueueEntryIndex
HKEY_LOCAL_MACHINE\COMPONENTS\AdvancedInstallersNeedResolving
Reboot - then check for updates.

Source - Microsoft.

http://www.sevenforums.com/windows-updates-activation/276122-windows-update-failed-code-error-8000ffff.html
Relevancy 92.02%

I'm trying to install update KB2639308 but it keeps saying that it fails and gives me the error code WindowsUpdate_FFFFFFFE. I looked it up online and it says that it can't update because of malware. However, when I run Norton and do a full system scan it doesn't find anything. I also tried to fix it with the Windows Update Troubleshooter and that doesn't help either. Is there anything else I can do without having to fully reinstall Windows 7 like the info on the site says? Please help.

A:Failed Windows Update, error code WindowsUpdate_FFFFFFFE

Hi,

A pre-requisite for this update is having Service Pack 1 installed. Can you confirm that this is the case?

Also, which version of Norton are you running? Is it the very latest? I have found posts where running Microsoft's own MSE doesn't find any malware, yet the error this occurs, so lets try something totally different:

Please perform an online virus scan using ESET
ESET Online Scanner

Can you also please run this tool to allow us to diagnose any other conditions that might prevent this update installing:

http://go.microsoft.com/fwlink/?linkid=52012

1. Click the Continue button.
2. Click Copy button (ignore any error messages if they appear)
3. Paste the results here in your next reply

Regards,
Golden

http://www.sevenforums.com/windows-updates-activation/220812-failed-windows-update-error-code-windowsupdate_fffffffe.html
Relevancy 92.02%

hi ..., i need help regarding the windows update issue.
i'm using windows vista business sp2 running on lenovo thinkpad sl300.
i want to upgrade my harddrive since i need a bigger capacity. so, i try to move my data on old harddrive to a new one.
i'm already try to migrate my harddrive several ways:
1. i try to clone my harddrive with sector by sector copy
2. i try to use rescue and recovery (utilities from thinkvantage)
3. i try to use backup and restore center (windows complete pc backup)
all of them give me the result, everything works just fine, except i no longer can run windows update and all related to it, for example microsoft security essentials.
i already try to fix the windows update with microsoft fix it
http://support.microsoft.com/kb/971058/en-us with normal and  aggresive mode, none of them works.
can anyone help me on this?Regards, Ferry Huang

A:Windows Update Failed Error Code 0xc8000247

but when i register the dll, there are some error saying the dll is missing or not valid (something like that),
maybe some DLLs are damaged.

Please start the command prompt (cmd.exe) with admin rights [1] and run sfc [2]:

sfc.exe /scannow

Is it able to find and repair broken files (create the txt file shown under [2] and look if all files are restored)?


best regards
André

[1]
http://windows.microsoft.com/en-US/windows7/How-do-I-run-an-application-once-with-a-full-administrator-access-token

[2]
http://support.microsoft.com/kb/929833 "A programmer is just a tool which converts caffeine into code"

Want to install RSAT on Windows 7 Sp1? Check my HowTo: http://www.msfn.org/board/index.php?showtopic=150221

https://social.technet.microsoft.com/Forums/en-US/54066ae6-d318-4c09-96a0-316e573c9c37/windows-update-failed-error-code-0xc8000247?forum=itprovistamigration
Relevancy 92.02%

I have the problem with HP Pavilion Notebook P1Q20EA.
Any idea how to solve this?
 
 am not enable to run recovery, although I have recovery disk and the recovery drive is untouched. Anyone here from HP support?

A:Windows 10 Recovery failed ; Error code: 0xc000000f

Hi @OMH7, Welcome to the HP Forum! This is a wonderful location to converse with  the community, get assistance and find tips . For you to have a rewarding experience, I would like to include the following link for your perusal and reference. First Time Here? Learn How to Post and More I understand you are having a difficulty doing a recovery, although you do have disks and the recovery partition. I am glad to help with that.Here is a link to HP PCs - Performing an HP System Recovery (Windows 10), which will explain the issue and how to overcome it. Best of Luck! Please let me know if this information helps you resolve the issue by marking this post as "Accept as Solution". This will help others easily find the information they may be looking for.  Also, clicking the" Thumbs up" below is a great way to say thanks!   





Sparkles1

http://h30434.www3.hp.com/t5/Notebook-Operating-System-and-Recovery/Windows-10-Recovery-failed-Error-code-0xc000000f/td-p/5540886
Relevancy 92.02%

Hi,

I have encountered error code 800F0900 with the recent Windows Update process. The followings are my screen shots and CBS logs for your perusal.

Thanks for taking time to solve my problem.

Regards.
STLai

A:Windows Update failed error code: 800F0900

Please follow the Windows Update Posting Instructions and post the requested data
If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

http://www.sevenforums.com/windows-updates-activation/346084-windows-update-failed-error-code-800f0900.html
Relevancy 92.02%

Hoping someone can help me here. I have seen Noel DP post several resolutions but each seem custom to the errors the other user gets.

I ran SFC/Scannow with no errors. Ran Checksur and got errors.

Unavailable repair files:
servicing\packages\WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~x86~~7.6.7600.320.mum
servicing\packages\WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~x86~~7.6.7600.320.mum
servicing\packages\WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~x86~~7.6.7600.320.cat
servicing\packages\WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~x86~~7.6.7600.320.cat

CBS log and CheckSUR Log attached.

A:Windows Update failed error code: 800F0900

This sounds to me like you may have to try going in and deleting the windows update catalog files and re running windows update and see what happens. If that doesnt solve the issue post back and we can take it from there.

http://www.sevenforums.com/windows-updates-activation/349610-windows-update-failed-error-code-800f0900.html
Relevancy 92.02%

Hi,

I recently reinstalled windows 7 on my computer after experiencing many crashes and update failures. Windows update succesfully installed all the other updates except for service pack 1. I've tried Microsoft fixit tool and Windows system update readiness tool. I've also tried clean boot, disk check, SFC... all without success.
I really don't wish to reinstall windows again for the 100th time
Appreciate your help.

Avi

A:Windows 7 failed to install SP1, error code 800736CC

Check your ram.
Memory Diagnostics Tool
Memtest86+ - Advanced Memory Diagnostic Tool
How to use memtest:
RAM - Test with Memtest86+

Check the hard drive with the manufacturer's diagnostic tools.
Hard Drive Diagnostics Tools and Utilities (Storage) - TACKtech Corp.
Hard Drive Diagnostic Procedure

http://www.sevenforums.com/installation-setup/261395-windows-7-failed-install-sp1-error-code-800736cc.html
Relevancy 92.02%

Hello, My windows update keeps failing on the same 5 updates with the error code 8024200D , This is really annoying me, I have tried everything on the internet i could find and nothing has worked, Can anybody help?, Thank you,

Sean.

Windows 7 Professional 64bit:

Windows 7 Service Pack 1 for x64-based Systems (KB976932)

Update for Windows 7 for x64-based Systems (KB2763523)

Update for Windows 7 for x64-based Systems (KB2533552)

Security Update for Windows 7 for x64-based Systems (KB2864058)

Security Update for Windows 7 for x64-based Systems (KB2620704)

Relevancy 91.16%

Hi I am new to this forum and hope you may be able to help me with a problem with Windows Pro backup As you would Backup 0x80780049 to code Windows failed error complete be aware this is called quot Windows File Recovery quot I have been using W Pro for about five months and running the backup utility for about four months with no major issues I have used it to error code 0x80780049 Windows Backup failed to complete create a system image and scheduled to back up my data files weekly For the past two weeks I have been getting an error message quot error code x quot along with a message that my files did not backup My backup error code 0x80780049 Windows Backup failed to complete is via esata to an external drive and as mentioned above this was working fine I even tried a restore of a couple of files to prove it but now it will not complete the backup I even deleted the entire backup and started again from scratch but backup fails at about completion I have checked with windows defender and no viruses exist Any help would be appreciated otherwise I may revert to a W refresh but this will mean reloading my programs regards Harry

A:error code 0x80780049 Windows Backup failed to complete

You sound very knowlegable but I just have to ask these stupid questions:

Do you have adequate room on your external drive or could it be running low?
Has you RAM usage increased recently because of some newly introduced programs?
Is your pagefile set to auto-adjust or has it been manually configured?

http://www.eightforums.com/general-support/22642-error-code-0x80780049-windows-backup-failed-complete.html
Relevancy 91.16%

Tried running windows update KB2545698 and it failed due to error code 800B0100. Please help!

A:Update for Windows 7 (KB2545698) failed due to error code 800B0100

Please follow the Windows Update Posting Instructions and post the requested data
If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

http://www.sevenforums.com/windows-updates-activation/338121-update-windows-7-kb2545698-failed-due-error-code-800b0100.html
Relevancy 91.16%

I have a HP mini 110-3000 and am trying to install the Windows 7 Service Pack 1 but every time I have tried to update, it comes up with error code 26. I have tried everything that I could think of and need assistance.

A:Windows 7 Service Pack failed to update, error code 26

Hello Krayola47, welcome to SevenForums!

Can you post the requested data please?

Windows Update Posting Instructions

Tom

http://www.sevenforums.com/windows-updates-activation/300678-windows-7-service-pack-failed-update-error-code-26-a.html
Relevancy 91.16%

OK, so I used the MCT to build a USB install. Booted from USB and was offered four options: Win 10 Pro, Win 10 Home, Win 10 Home single language edition, Win 10 Education.

I clean installed, used my MS Account and Windows failed to Activate. Error Code 0x87E105DC.

Google gives me Xbox results.

Hoping that it's an activation server issue.

Relevancy 91.16%

Hello,

I am trying to download and install windows updates so that they will be installed in my image when i come to deploy this for a client.

At the moment they are installing and then on reboot saying "Failed to configure windows updates" "Reverting change"

I imagine this will be quite a common error and a potentially easy fix.

Can anyone shed some light on this?

Thanks.

A:All Windows Updaates failed. ERROR DETAILS: Code 80071A2D

Hello KyranStansfield . welcome to the SevenForums . :You need to follow the posting instructions for this thread.

http://www.sevenforums.com/windows-updates-activation/338951-all-windows-updaates-failed-error-details-code-80071a2d.html
Relevancy 91.16%

I had the "backup failed" problem and nothing that I did fixed the issue. I followed all of Microsoft's fixes to no avail. Luckily I found a website that had the exact fix, links to the free software you will need and detailed instructions (including screen shots). I followed the instructions and now my backup works flawlessly. The link to the website is below. Good luck!

http://www.pagestart.com/win7br0x8100003301.html
 

https://forums.techguy.org/threads/windows-7-backup-failed-error-code-0x81000033-resolution.1012917/
Relevancy 90.3%

I am deploying my Windows RT 8.1 application and I get the following message;

Add-AppxPackage : Deployment failed with HRESULT: 0x80073CF3, Package failed updates,

dependency or conflict validation.
Windows cannot install package  because this package depends on another package that could not be found. This package requires minimum version 12.0.21005.1 of framework Microsoft.VCLibs.120.00 published by any publisher to install.

C:\Program Files (x86)\Microsoft SDKs\Windows\v8.1\ExtensionSDKs\Microsoft.VCLibs\12.0

I was able to deploy my application before OK. I do not know why it is going wrong now, how do I fix this?

https://social.technet.microsoft.com/Forums/en-US/188cf10b-2b49-4695-ba0c-2fcc46977972/addappxpackage-deployment-failed-with-hresult-0x80073cf3-package-failed-updates?forum=w8itproinstall
Relevancy 90.3%

Auto security update seems to have created error code C0000142 and saying unable to access (?) as well as volume on computer no longer works - now what folks?  Many thanks as always.

A:windows 7 home 64 bit dell PC update failed caused error code

Please download MiniToolBox  , save it to your desktop and run it.
 Checkmark the following checkboxes:  List last 10 Event Viewer log  List Installed Programs  List Users, Partitions and Memory size.
 Click Go and paste the content into your next post.
 Also...please Publish a Snapshot using Speccy - http://www.bleepingcomputer.com/forums/topic323892.html/page__p__1797792#entry1797792 , taking care to post the link of the snapshot in your next post. 
Louis

http://www.bleepingcomputer.com/forums/t/586384/windows-7-home-64-bit-dell-pc-update-failed-caused-error-code/
Relevancy 90.3%

Hi Guys

i got an error while activation of windows 7 error codes 0x8007007b and also key management service (kms) binding is missing or corrupted.

steps i have done :

1. Run windows tweaking tool
2. SFC scan - no corrupted files
3. checked for virus
other ways of activation is disabled i dont know why

i have a valid key for W7

can anyone tell me what to be done

no errors in eventvwr with codes 12288,12289,12290 responsible for kms service

can anyone tell me how to activate windows now

A:Windows activation failed -error code 0x8007007b & kms missing/corrupt

Please follow this tutorial and post an MGADiag report - then we can see what the problem is.

http://www.sevenforums.com/windows-updates-activation/234159-windows-genuine-activation-issue-posting-instructions.html

Ignore errors produced when clicking on the Copy button - they simply mean that the tool could not create the backup files for some reason. The data is still copied to the clipboard for pasting to your response.

Please also state the Version and Edition of Windows quoted on your COA sticker (if you have one) on the case of your machine (or inside the battery compartment), but do NOT quote the Key on the sticker!
http://www.microsoft.com/en-us/howtotell/Hardware.aspx

http://www.sevenforums.com/windows-updates-activation/292669-windows-activation-failed-error-code-0x8007007b-kms-missing-corrupt.html
Relevancy 90.3%

Hi. i have a problem few days now.i try to open my windows 7 firewall but nothing happen's.i'm trying then to open the windows firewall advanced security but i get an error that the 'snap-in failed to load with error code 0x6D9 .i'm searching for a solution for hours,i try a several tips but i get no results.I also did a full scan with security essentials,super antispyware,Malware bytes,Eset on line scanner,TDSS rootkit removing tool but the computer seems to be clean.
Everytime now i restart i take message on start up that the " the windows could not connect to the group policy client service" and when i open a program after some resets on the firewall i did while try various tips from forum's,i get the message if i want to allow on the firewall the each connection of specific program.
Can somebody help me ?thanks

A:snap-in failed to load with error code 0x6D9 at windows 7 firewall

See if what "Mow Green" posted here will help you, too: Windows Firewall with advanced Security snap-in failed to load. Error Code 0x6D9

http://www.sevenforums.com/system-security/268090-snap-failed-load-error-code-0x6d9-windows-7-firewall.html
Relevancy 90.3%

I am having this issue for months now, and i keep getting these errors. I have searched and tried different methods from other forums but only one worked for me, unfortunately just once ( flushing of the software distribution) but after the next day, when my pc was having its automatic update, it gave me the same errors again, and i could not use the method i used the day before. im not a techie person so please help me with light terms if it's ok.. thanks..


i have Windows 7 Ultimate 64 bit, SP1, AV- Microsoft Security Essential, CCleaners, and SuperAntiSpyware Free Edition


i always get error codes 80070643, 80071a91 and 78f, and because of these all 23 important updates always failed..

A:windows failed updates with Error Codes 80070643, 80071A91 and 78f

Install a few of them at the time and see if you still have issues?

http://www.sevenforums.com/windows-updates-activation/250520-windows-failed-updates-error-codes-80070643-80071a91-78f.html
Relevancy 89.44%

Hi I am running Windows Vista Home Premium on my laptop For last few days I have been trying to install 'Upadate for Microsoft Silvelight KB ' without any luck Code Microsoft Upadate Error (KB979202) - Vista failed Windows for Silvelight Each time I get the error quot WindowsUpdate quot - Windows Windows Vista Upadate for Microsoft Silvelight (KB979202) failed - Error Code Update Encountered an unknown error However in between another update KB has been installed successfully I tried to resolve this problem by wandering through different forums However no luck yet Can anybody help me resolve this problem and get my Windows Installer back on track By the way I did the following Run cmd exe with administrative previlliges and type sfc scannow Following is the output I received - Microsoft Windows Version Copyright c Microsoft Corporation All rights reserved C Windows system gt sfc scannow Beginning system scan This process will take some time Beginning verification phase of system scan Verification complete Windows Resource Protection found corrupt files but was unable to fix some of them Details are included in the CBS Log windir Logs CBS CBS log For example C Windows Logs CBS CBS log C Windows system gt Does anyone have any idea of what's going wrong here Do I have to fix the corruption to make this installation happen Please help me resolve this issue Thanks Shirish

A:Windows Vista Upadate for Microsoft Silvelight (KB979202) failed - Error Code

We have people at the foum with expertise in this area and I am sure you will be visited soon. My only comment is, are you sure that this update is required? Second are you sure that you do not already have it?

http://www.vistax64.com/windows-updates/268494-windows-vista-upadate-microsoft-silvelight-kb979202-failed-error-code.html
Relevancy 89.01%

I was working on my laptop and it has Vista installed on it not factory installed added later When I went to log off it gave me notice that I had some important Windows updates that needed to be installed and those would install before shutting down The computer did it s thing downloaded installed then failed to error.... Windows start shut down properly The Windows failed to start error.... next morning I went to turn on the computer and all I get is a black screen with this message Windows Boot Manager Windows failed to start A recent hardware or software change might be the cause To fix the problem Insert your windows installation disc and restart your computer Choose your language settings and then click Next Click repair your computer If you do not have this disc contact your system admin or computer manufacturer for assistance Filce windows system winload exe Status xc f Info The selected entry could not be loaded because it is missing or corrupt Ok so seems like an easy fix huh Well I got this computer from a friend that needed money quick and I don t have a disc I called her begging for it and she has no clue where the disc is My question is does anyone know how to correct this issue without the installation disc It s a Toshiba Satellite laptop nbsp

https://forums.techguy.org/threads/windows-failed-to-start-error.719733/
Relevancy 89.01%

Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
and it says to insert your Windows installation disc.

Then it says,
File: \Boot\BCD
Status: 0xc000014c
Info: An error occured while attempting to read the boot configuration data.

I don't have a Windows installation disc. I have Windows Vista. I've tried to put in a Windows 8 and 7 recovery disc because that's what another website suggested to do but that didn't do anything.

How do I fix this?!

Thank you.

A:Windows Failed To Start Error.

You may have to rebuild the master boot record

Start the computer in safe mode with command prompt
Open command prompt and Type C: and press enter
at the C:\ prompt type cd boot
At the C:\Boot prompt type the following and press enter after each
bootrec /fixmbr
bootrec /fixboot
bootrec /rebuildBcd
Close command prompt and resart your computer in normal mode.

http://www.vistax64.com/general-discussion/301332-windows-failed-start-error.html
Relevancy 88.58%

Hi Ive been having a really hard time installing a wireless card on a d m hp microtower and Im not sure if its hardware or software related My linksys USB wireless card works (device start) failed Code to 10 fine on all other Code 10 (device failed to start) computers using the supplied drivers however on this Code 10 (device failed to start) computer it has never worked Other USB devices seem to work just fine but for some reason the wireless card is giving me a hard time Ive had XP home and Pro installed fully updated and the same problem occurred on both I have updated the bios and looked for the most updated drivers but the device still wont start Like I said other USB devices function normally Is there any way to know if there is just a hardware incompatibility or if theres something else thats keeping this from working At one point the card did work for a brief second and detected networks but only for a second I am certain the device is functional This code is starting to become a nightmare Any help appreciated

A:Code 10 (device failed to start)

just an update. the device seems to briefly appear and function when plugged into a new port after restarting, but then the system crashes when i try to use it.
I am completely lost. I know the device works and I know the ports work. What could be the problem?

http://www.techsupportforum.com/forums/f10/code-10-device-failed-to-start-438245.html
Relevancy 88.58%

I have had problems starting my SMA Sunny Explorer program since having problems with Microsoft.Net framework files.

I do nor know how this can be connected and have searched online for answer to no avail.

I get this message when starting the program..
System.Exception in SMA Sunny Explorer.Configurator.InitializeDataModel()
Failed to start ODB services. Result code: 0

Any ideas anyone?

http://www.sevenforums.com/general-discussion/387042-failed-start-odb-services-code-0-a.html
Relevancy 88.58%

I'm trying to turn on my firewall and I get the the Error " Windows can't change Some of your settings. Error Code 0x80070422" When I try to go to advanced settings I gfet the error above "Windows Firewall with advanced Security snap-in failed to load. Error
Code 0x6D9". I'm thinking that error in settings is why the firwall won't turn on. How can I get to the settings and check them?

A:Windows Firewall with advanced Security snap-in failed to load. Error Code 0x6D9

You're welcome, CardGunner. See if this update is listed in Installed Updates 
 KB976902 - Description of the Windows 7 and Windows Server 2008 R2 installation software feature update
 I suspect that is the update that may have restored the firewall.

https://social.technet.microsoft.com/Forums/en-US/cf5681ec-c8b3-4108-a203-1cce078665c1/windows-firewall-with-advanced-security-snapin-failed-to-load-error-code-0x6d9?forum=w7itprosecurity
Relevancy 88.15%

Hi all I've seen this problem a lot online in forums etc but none of them offer a solution for my situation the main difference being my 'Product Recovery CD' wont load Can anyone help I have a Toshiba Equium Laptop with Windows Vista Home Premium bit When i switch it on it goes to a 'Windows Boot error failed 0xc000000f Windows start, to Manager' screen It reads 'Windows failed to start A recent hardware or software change might be the cause To fix the problem Insert your windows installation disc and restart your computer Choose your lamguage settings and then click 'Next' Click 'Repair your computer' File Boot BCD Status xc f Info An error occured while attempting to read the boot configuration Windows failed to start, 0xc000000f error data ' Before this screen appears I have options to press F or F only I've gone into Bios and selected to boot from the CD Recovery CD but it does nothing - no screen Windows failed to start, 0xc000000f error to select language etc appears nothing It whurrs amp spins a lot but nothing appears I've even copied a Recovery download onto a USB and tried booting from that but does nothing also It appears I cant access the Product Recovery CD to even reinstall windows Can anyone shed some light on this problem Much apprecited

A:Windows failed to start, 0xc000000f error

That sounds like a BIOS matter.

First, set the boot order of your machine so that it boots from the CD first. When the machine boots up and you see the first screen, hit the <F2> key, the <F10> key and the <F12> keys at the same time. You'll see a screen with the computer's boot order. Use the arrow keys to get to the CD drive, then hit <Enter> and it'll go to the top of the list.

Reboot. It should boot from the CD and get cracking.

On some Toshiba machines you can boot straight from the CD by pressing the <F12> and <C> keys at the same time at the initial boot screen.

http://www.vistax64.com/general-discussion/275323-windows-failed-start-0xc000000f-error.html
Relevancy 88.15%

Hi there I'm posting this thread after getting tired reading all the post everywhere with no specific solution for the problem I've been already facing since last night with all the hopes to get it all done right here guys help me plz well I'm using a Dell Inspiron laptop running Windows Ultimate x last night i had (Error Windows failed start. to 0xc000000f) like a spyware and unfortunately someone suggested SpyHunter software to deal with it for all those having such experience you may understand that once i restarted the system it went through Grub Loader that i realized later it's a Linux system file which I've never had or installed anyway i have Windows failed to start. (Error 0xc000000f) a flash drive which has a Windows installation files using it as the Windows setup DVD which i had to boot from going into Windows Setup-- gt repair your computer then running the Command Prompt to enter the lines Bootrec exe fixmbr Bootrec exe fixboot in both cases i got the result that it has been done successfully Now after booting my computer i got the following quot Windows failed to start A recent hardware or software change might be the cause quot telling me to get back to my Windows installation disc and run Repair my computer in order to fix this problem ending that with the lines File boot BCD Status xc f Info An error occurred while attempting to read the boot configuration data Now according to some forums i found a suggestion to load the run the Command Prompt to use BOOTREC REBUILDBCD command which I've already done and got the following Scanning all disks for Windows Installations Successfully scanned Windows installations Total identified Windows installations E Windows ------- gt gt quot Note that my HDD is divided into two partitions C as the Windows drive and D quot add installation to boot list Yes Y No N All A and for sure whenever i enter Y or Yes i receive the message quot the requested system device cannot be found quot In such case i had to go and read more within different online posts including this forum to find out many solutions which I'm already messed up knowing nothing about what to use I'll make it easier as i had a solution of using DISKPART command to list my disks -- gt Select Disk quot online quot --- gt List Partitions where i get the following DISKPART gt list partition Partition Type Size Offset ------------- ------------ ------- -------- Partition OEM MB KB Partition Primary GB MB Partition Primary GB GB Partition Extended GB GB Partition Extended GB GB at this point i gave up i realized that my Windows drive letter has changed from C to E but i cant figure out how to react to the DISKPART results i got as I have no idea what to do I found a thread in this forum which describes a similar problem but i have to admit i cant find an exact specific solution for what I'M facing with the fear of loosing one of my HDD drives upon performing a wrong action The option which ain't familiar is to perform a HDD format or even the Windows drive format since its full of data that no way to drop or even to backup during this time as I'm running out of time to finish off few projects on my computer As far as i got the lesson of being away of all the damn wares such as SpyHunter which brought me to all of this I've done my best to illustrate the whole problem in details in order to make it clear for people who can direct me to right way as i had the day off in order to fix such a problem waiting for you guys to help me asap thanks alot in advance Note - I'm Using a Dell laptop running a solo Windows x OS - My HDD is GB quot shown as GB withing DISKPART quot - Using a USB Flash drive as a bootable Windows Installation disc

A:Windows failed to start. (Error 0xc000000f)

Boot into Win7 installer or Repair CD - System Repair Disk to confirm that the 100mb OEM partition is marked Active: Partition - Mark as Active

Then close the Command Box, run Startup Repair - Run 3 Separate Times until Win7 starts.

Report back results.

If you need the installer for repairs, it is available in Step 6 of Troubleshooting Windows 7 Failure to Boot along with every other step that can be tried to repair Win7. If the above repairs don't work straight away, then start at the top of those steps to work through them.

http://www.sevenforums.com/installation-setup/304211-windows-failed-start-error-0xc000000f.html
Relevancy 87.29%

Hi members of Bleeping Computer com After some recent issues at start up my machine has decided to cough up a xc e error message I'm sure its nothing new though The exact message Windows Boot Manager Windows failed to start A recent hardware or software change might be the cause Error message windows start failed 0xc000000e to To fix the problem Insert your Windows installation disk and restart your computer Choose your language setting and then click Next Click Repair your computer If you do not have this disk contact your system administrator of computer manufacturer for assistance Status xc e Info The boot selection failed because a required device is inaccessible My system specs are Windows Home Premium bit SP GA P UD mobo Core i ghz OC gb Error message 0xc000000e windows failed to start MHz mhz OC tb samsung hdd w psu gtx gpu After some internetting I learned that I should use the Windows Installation disk to repair the faulty parts of the windows start up process Windows Upon further reading this most likely will not work due to the repair disk being unable to repair an updated version of Windows So before I go ahead and turn my nice black box desktop PC Beastie into an expensive paper weight I come here seeking advice on how to repair my machine without killing all the data on it I use my machine for some gaming and general browsing duties Any help getting it up and running again will be much appreciated Revo

A:Error message 0xc000000e windows failed to start

Try Startup Repair, please.
 
Startup Repair - Windows 7 features - Microsoft Windows - http://windows.microsoft.com/en-us/windows7/products/features/startup-repair
 
Startup Repair fFAQ - http://windows.microsoft.com/en-us/windows7/startup-repair-frequently-asked-questions
 
https://neosmart.net/wiki/0xc000000e/
 
Louis

http://www.bleepingcomputer.com/forums/t/586530/error-message-0xc000000e-windows-failed-to-start/
Relevancy 86.43%

Hi guys First off I am sorry if this has been Windows failed recent BSOD hardware error. to start...A posted before I have seen it on Google with different suggestions that people said didn t Windows failed to start...A recent hardware error. BSOD work I don t have my computer to work on so I have to use my work computer to type this Last night I started my Toshiba Windows amp laptop and it went to the screen that says that Windows failed to start A recent hardware or software change might be the cause Options of Launch Startup Repair recommended vs Start Windows Normally are given I use the first option and it ends up with a black screen and a bigger than normal white arrow cursor that responds to the mouse and that s it I use the second option that shows the Windows logo loading up normally then right to the BSOD I went to safemode and turned off the auto restart To summarize the error message in the BSOD said Unmountable Boot Volume At the bottom it said STOP X ED xFFFFFA C CD XFFFFFFFFC then two xlots of s repeated twice I tried to go to a previous restore point with no luck I saw that there was a BSOD help section but didn t know how to use it since I can t get my laptop to start I would be grateful if someone knows where to direct me or any advice or if any additional information is needed Thanks Mikeinstlouis nbsp

A:Windows failed to start...A recent hardware error. BSOD

Give this link a read---> How To Fix Unmountable Boot Volume STOP: 0x000000ed Let us know how things go!
 

https://forums.techguy.org/threads/windows-failed-to-start-a-recent-hardware-error-bsod.1148910/
Relevancy 86.43%

This is the message I receive- Windows failed to start A recent hardware or software change might be the cause Booting in safe mode Dell data safe restore Last known good configuration and directory services restore mode all relate back to this error message I have no on recent...." Error start. A "Windows message failed startup to created restore points and no system image recovery Also my Error message on startup "Windows failed to start. A recent...." computer did NOT come with a windows disk Which is a crock in my opinion When I do Startup Repair this is the only problem detected in View diagnostic and repair details Root Cause Found Failure while setup is Error message on startup "Windows failed to start. A recent...." in progress System Disk device harddisk windows directory C windows autochk run Number of root causes I have requested a windows disk from Dell months ago I received nothing surprise Thinking maybe I input the info wrong I re-submitted a request today But I will not hold my breath What options do I have left at this point The cost of bringing it to a professional isn't far from the cost of replacing this laptop as it is I will be thankful for any help or advice

A:Error message on startup "Windows failed to start. A recent...."

Hello and Welcome
 
Being that this is a Dell computer, have your tried booting into the Dell Diagnostics by hitting the F12 key when you first turn on the computer and then running a diagnostics on the hardware, especially the hard drive to make sure its not failing.  If the hard drive is failing it will have to be replaced before a repair can be done.

http://www.bleepingcomputer.com/forums/t/502754/error-message-on-startup-windows-failed-to-start-a-recent/
Relevancy 86.43%

Hi guys First off I am sorry if this has been posted before I have seen it on Google with different suggestions that people said didn't work I don't have my computer to work on so I have to use my work computer to type this Last night I started my Toshiba Windows amp laptop and it went to the screen that says that Windows failed to start A recent hardware or software change might be the cause Options of Launch Startup Repair recommended vs Start Windows Normally are given I use the first option and it ends up with a black screen and a bigger than normal white arrow cursor that responds to the mouse and that's it I use the second option that shows the Windows logo loading up normally then right to the BSOD I went to safemode and turned off the auto restart To summarize the error message in the BSOD said Unmountable Boot Volume At the bottom it said STOP X ED xFFFFFA C CD XFFFFFFFFC then two xlots of 's repeated twice I tried to go to a previous restore point with no luck I saw that there was a Failed start..A recent hardware.....error. BSOD Windows to BSOD help section but didn't know how to use Windows Failed to start..A recent hardware.....error. BSOD it since I can't get my laptop to start I would be grateful if someone knows where to direct me or any advice or if any additional information is needed Thanks MikeinstlouisEdit Topic moved from Windows to the more appropriate forum Animal

A:Windows Failed to start..A recent hardware.....error. BSOD

Boot into Safe Mode with Command Prompt.
 
Open the Command Prompt and type in bootrec /fixboot.  Please notice the space between the bootrec and the /fixboot.  Now press Enter.
 
Reboot to see if this resolves the issue.

http://www.bleepingcomputer.com/forums/t/577498/windows-failed-to-starta-recent-hardwareerror-bsod/
Relevancy 86%

Hiya
I was using a thread on this Microsoft Support to fix my cd rom drive as it wasn't showing up on My Computer, I'd done it before and it worked perfectly fine
I went on the registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
And deleted 'upperfilters' as per instruction, however there was no 'lowerfilters'
After this I restarted my laptop to see if it worked and my touchpad and keyboard wouldn't work!
I've had to borrow a friends USB mouse but have no keyboard (currently on my iPhone)
I've had to go onto a guest account on my laptop as I am unable to type in my password on my administrator account
Any way I can fix this with just the USB mouse?!

A:Touchpad and Keyboard on Sony Vaio 'failed to start (Code 10)'

This is going to sound like suggesting that you close the gate after the horse has left the corral, but any time you make any changes in the Registry you should back it up first with software like ERUNT.  Then if there is a problem you can revert it to the preveous working condition.
 
Please post the make and model of this computer?
 
Do you have a installation disc for your version of Windows Vista?  If not, do know someone who can loan you a disc of the same version and bit type?

http://www.bleepingcomputer.com/forums/t/502631/touchpad-and-keyboard-on-sony-vaio-failed-to-start-code-10/
Relevancy 85.57%

Like many times in the past, windows had been prompting me to install updates. I selected the option to install these updates before I shut my computer down. My screen would read "installing update 1 of 3" or something similar, but that would stay on that screen for hours until I would perform a hard shut down. This happened several times before my computer simply stopped starting up. System Restore doesn't work and neither does anything else. A Startup Repair message flashes on my screen saying "Windows cannot repair this computer automatically. If you have recently attached a device to this computer, such as a camera or portable music player, remove it and restart your computer. If you continue to see this message contact your system administrator or computer manufacturer for assistance."

Please help

A:Computer won't start up after several failed attempts to install updates

Hi and welcome to TSF please post your make and model and full spec,is it laptop or desktop,do you have any service packs installed,have you tried safe mode.

http://www.techsupportforum.com/forums/f217/computer-wont-start-up-after-several-failed-attempts-to-install-updates-428372.html
Relevancy 85.57%

Tech Support Guy System Info Utility version OS Version Microsoft Windows XP Home code error failed Edition Service Pack bit Processor Intel R Pentium R CPU GHz x Family Model Stepping Processor Count RAM Mb Graphics Card Intel R G Graphics Controller Mb Hard Drives C Total - MB Free - MB Motherboard Dell Computer Corp K Antivirus Microsoft Security Essentials Updated Yes On-Demand Scanner Enabled I ran pc check test and while doing so I notice most hard drive test passed except TARGETED READ TEST Error reading sector Test found sector error Failed Error code WHD -S K SMART SHORT SELF TEST The device reported the following status The previous self-test completed the read element of the test failed The first failing LBA value is and the failure occurred after the device had been operating for power-on failed error code hours Failed Error code WHD -XU this statement the failure occurred after the device had been operating for power-on hours not sure what this is insinuating failed error code I m pretty sure this never happen I never leave my computer on for that long of hours I ve been trying to upgrade from windows XP to windows Now it seems that i have to buy a hard drive for my Dell computer which according failed error code to Dell is I just want to know if there is any other way to fix this hard drive without having to come up with this I know that this computer has alot more to give It runs great and I haven t had any problems Until now that I have to upgrade and will no longer be getting updates for XP is this a scam of sorts or is my computer really at risk Help please thanks for reading this Sandy nbsp

Relevancy 85.14%

A few people have asked similar questions i have read most of them but I have FOUND 0xc000000f help? NOT IMAGE error, & FILE to Windows start failed different circumstanses so IMAGE FILE NOT FOUND & 0xc000000f Windows failed to start error, help? please bear with me and if anyone can help it would be greatly appreciated I backed up the system to my external HDD F I than went in to the recovery options Lenova laptop I than tried to restore my system to its 'initail state' About a second or two later it there was a flash error I had no time to see what it was but it basically said it failed to restore the system I switched off the IMAGE FILE NOT FOUND & 0xc000000f Windows failed to start error, help? laptop maybe I should of waited but Ive done this before a while back on a different laptop Half way during the restore process it froze than there was no progress in restoring the system as it remaided on So that is why I swichd it IMAGE FILE NOT FOUND & 0xc000000f Windows failed to start error, help? off from the power button Now all I get is this Windows failed to start A recent hardware or software change might be the cause Windows failed to start A recent hardware or software change might be the cause To fix the problem File windows system winload exe status xc f I tried going in to advancced options but I cant seem to get past the message- I even ran memory diagnostics Than it just takes me back to the message about buying the CD I searched these forum threads and googled it for hours and everyone has similar problems but they go there to here in different ways which is why Im asking now if anyone could please help I tried getting the image file on to a cd but theres so many individual files its well over Gb- I can't see the image file back up I know it should only be file I read a few threads on image file and a lot of people are saying to others there 'victims' of windows back-up So please do tell me if this is such a known issue why has it not been fixed The laptop is not even a year old theres nothing wrong with the hard drive Why does it do this and how can I get the system back without forking out hundreds of 's This is quite urgent- in that being - its not my laptop - Theres no way I can spend more on repairing laptops as i just did on my own any suggestions

A:IMAGE FILE NOT FOUND & 0xc000000f Windows failed to start error, help?

Seriously nobody knows anything here? I get its the same thing being asked but as I said, my situation is different. The laptop is a year or so less old... I received an array on a second or 2 in to restoring back to 'initial state'.
Some1 must know something!

http://www.sevenforums.com/backup-restore/225868-image-file-not-found-0xc000000f-windows-failed-start-error-help.html
Relevancy 85.14%

Hey guys Yesterday I came home from work to a black screen that said quot Error Loading OS quot Not sure how this happened so I restarted it and it came right back to that Spent a few minutes digging around and found out that my hard drive was not set in the BIOS as a boot drive although no idea how that changed so I switched it back and start / Missing loading OS Windows failed 0xc000000f / Error / to Solved: HDs the computer booted fine Today I come home from work and again I see the black screen that says quot Error Loading OS quot I restarted went in the BIOS and saw that of hard drives in the system only non boot showed up Solved: Error loading OS / Missing HDs / Windows failed to start / 0xc000000f This is weird I shut down for a few minutes booted it back up to the BIOS and my primary hard drive was listed again Selected that and Windows booted up fine Was using the computer for about an hour when everything Solved: Error loading OS / Missing HDs / Windows failed to start / 0xc000000f just froze The mouse still worked and moved but nothing else at all was working So I restarted again and I got to a quot Windows failed to start quot xc f error Off to the BIOS again where again only or of my hard drives were listed I shut down left it for a few minutes rebooted back and selected my primary drive again Then I went ahead and created an image of my primary drive just in case I have no idea what this is and could use some help figuring it out I thought it might be a hard drive failure or it could be something messed up in my motherboard I have a GB Crucial M SSD drive that is less than a year old along with an ASRock Z PRO motherboard that was bought at the same time Any ideas nbsp

A:Solved: Error loading OS / Missing HDs / Windows failed to start / 0xc000000f

https://forums.techguy.org/threads/solved-error-loading-os-missing-hds-windows-failed-to-start-0xc000000f.1040388/
Relevancy 85.14%

I have a Lenovo Desktop which have Windows 7 Professional on it running for 2 years.

Suddenly, it fails to boot into Windows and show below error messages:

Windows failed to start. A recent hardware or software change might be the cause.

If I click "Start Windows normally", it just hang and reboot itself and continue this infinite loop.

I searched and tried below methods but none of them help. Please see if there are any other ideas. Thanks.

- Run automatic repair tool
- Run chkdsk tool
- Run sfc /scannow
- Follow instructions in Startup Repair Infinite Loop Recovery
- Reinstall Windows 7 Professional

A:Error: Windows failed to start. A recent hardware or software change

Hello Faith now as you have done those tests and reinstalled it really points the finger at some new hardware or perhaps something going wrong with the original hardware and I am thinking of the hard drive for example it is going south then it might well cause the problems you describe.

So have you renewed the drive or added any external drives or mice or suchlike recently or say within a month? I am leaning more to the drive failing to be honest and if you can get it to run then use this
SeaTools for Windows | Seagate
Now if you cannot get the machine to power up to do that have you got access to another machine? because you can use a USB to SATA adaptor to hook it up to another computer and run that test making sure you have the target drive (your Lenovo one) marked down for testing. See my pic of the adaptor.

Now another thing I have to ask is really obvious I suppose but has the machine been dropped, spilt on, had something dropped on it or exposed to extreme temperatures recently? ie left in hot car?

I am just trying to cover all bases here so bear with me.

http://www.sevenforums.com/performance-maintenance/360097-error-windows-failed-start-recent-hardware-software-change.html
Relevancy 85.14%

Hey guys A few days ago I came home from work to a black screen that said quot Error Loading OS quot Not sure how this happened so I restarted it and it came right back to that Spent a few minutes digging around and found out that my hard drive was not set in the BIOS as a boot drive although no idea how that changed so I switched it back and the computer booted fine Yesterday I came home from work and again I see the black screen that says quot Error Loading OS quot I restarted went in the BIOS and saw that of hard drives in the system only non boot showed up This is weird I shut down for a few minutes booted it back up to the BIOS and my primary hard drive was listed again Selected that and Windows booted up fine Was using the computer for about an hour when everything just froze The mouse still worked and moved but nothing else at all was working So I restarted again and I got to a quot Windows failed to start quot xc f error Off to the BIOS again where again only a few of my hard drives were listed I shut down left it for a few minutes rebooted back and selected my primary HDs / [SOLVED] 0xc000000f OS Missing start failed / loading / Error Windows to drive again Then I went ahead and created an image of my primary drive just in case This keeps happening and cycling over and over computer wont stay on for more than an hour anymore I have no idea what this is and [SOLVED] Error loading OS / Missing HDs / Windows failed to start / 0xc000000f could use some help figuring it out I thought it might be a hard drive failure or it could be something messed up in my motherboard I have a GB Crucial M SSD drive that is less than a year old along with an ASRock Z PRO motherboard that was bought at the same time Any ideas

A:[SOLVED] Error loading OS / Missing HDs / Windows failed to start / 0xc000000f

The c000000f error (File does not exist) is peculiar.

Anyways, If your BIOS is having difficulty enumerating more than one drive, I would venture to put my money on it being the motherboard at fault (unless you're using a drive controller card). The only other exception would be the power supply, in which it is having a difficult time powering the multiple drives. So you'll want to see about replacing the motherboard right now, as it's very evident this could be the cause and that there's absolutely no driver or Windows software that would create this kind of issue.

http://www.techsupportforum.com/forums/f299/solved-error-loading-os-missing-hds-windows-failed-to-start-0xc000000f-629591.html
Relevancy 85.14%

I bought this computer from a yard sale It had windows Vista on it at the time and user accounts The accounts with administration rights were password protected So since I didn't need any of the data I wanted to start windows failed error.....computer won't boot install after 0xc000000f do a clean windows install Well I tried and everything was working fine Then it froze at It stayed there for an hour and then it 0xc000000f error.....computer won't boot start after failed windows install said an error Forgot the error code I tried it again and same thing happened However after this time trying to boot up it gave me the xc f error I've tried to boot from cd and it won't let me now Won't boot into hard drive I 0xc000000f error.....computer won't boot start after failed windows install downloaded hirens cd on a usb and finally got it to work but unsure how to use it I tried installing windows using another usb device and it says disk failure then goes to the xc f code screen I've been researching for days and still no answer Please help

A:0xc000000f error.....computer won't boot start after failed windows install

0xc000000f is a "No Such File" error
So, most likely either your W7 recovery media is bad, or there's a problem with the system.
Start with these free bootable hardware diagnostics:  http://www.carrona.org/initdiag.html

http://www.bleepingcomputer.com/forums/t/619079/0xc000000f-errorcomputer-wont-boot-start-after-failed-windows-install/
Relevancy 84.71%

Hi everyone It's just a normal Toshiba NB D netbook The only thing that I change is the Wireless Card inside it the original is a common Atheros half mini card Recently I have the urge to use internet in ghz frequency Thus I decide to replace the old one with the half mini card Intel Wifi Link AGN It to failed Intel start 10 on Device NB550D Code - Card - Wireless doesn't turn out so well The driver is not recognised or more precisely the windows tries to install the driver but FAIL is reported Device manager tool shows an quot quot next to the network card and when I go the its properties at general tab quot The device failed to start - Code quot I tried many ways to uninstall the driver and reinstall again also tried Device failed to start - Code 10 - Intel Wireless Card on NB550D to download drivers from toshiba website for intel network card Nothing works so far and yeah I just Device failed to start - Code 10 - Intel Wireless Card on NB550D don't know what to do now The possibility that the intel card is broken or malfunctioned is eliminated because I checked that with another laptop already and it just worked like a charm Please help me solve this problem I really need to use dual band and ghz internet Appreciate any help

A:Device failed to start - Code 10 - Intel Wireless Card on NB550D

>The possibility that the intel card is broken or malfunctioned is eliminated because I checked that with another laptop already and it just worked like a charm


Regarding the error code 10:
http://support.microsoft.com/kb/943104/en-us

+The Code 10 error pertains mainly to hardware and device driver issues or to compatibility issues between hardware drivers and additional software that is installed in Windows.+

I don?t think its Wlan card issue? it could be a compatibility problem between the BIOS and the WLan card.
Not all devices are supported by BIOS?.


But at the other hand the WLan card appears already in device manager and therefore I think there should not be a BIOS compatibility issue.

Did you check if chipset would handle the Wlan card properly?

https://forum.toshiba.eu/showthread.php?69724-Device-failed-to-start-Code-10-Intel-Wireless-Card-on-NB550D
Relevancy 84.71%

Hello I have been working patiently for the better part of three days but cannot resolve the issue I can no longer use Windows Update Something seems to have happened on or after July -- the final date that updates were installed Thereafter only failure messages in the log now wiped clean as a result Update installer new 80072EE2 code 800F081F code failed after Windows of following one of the suggestions I found When I click quot check for updates quot I receive a message that a problem occurred failed new Windows Update installer code 800F081F after code 80072EE2 The error code is EE When I then click in that same window on quot Check online for updates from Microsoft Update quot I always get the message quot Install new Windows Update software To check for Windows Updates you must first install an update for Windows Update Install now quot Naturally I click on this only to receive error code F F I have tried out several suggestions that did seemed relevant including the methods I found at Windows Update service not running cmd says parameter incorrect - Microsoft Community While trying to execute Method I found that HKLM COMPONENTS was missing from view I found instructions on how failed new Windows Update installer code 800F081F after code 80072EE2 to use Load Hive to make this visible again No difference to Win Update I skipped Method because my antivirus software is a MS product and has been in use for years without any problems Method proved impossible to execute it seems to contain outdated information you can no longer manually download these elements instead you are redirected to a page that helpfully irony tells you that you should use Win Update on your own PC Method tells me to take ownership of pending xml that is not present on my system Method chkdsk results in the answer quot the drive the path or the file name is not valid quot I have now found this forum and have followed the instructions here to prepare for asking help Windows Update Posting Instructions SURT has been run once more SFC scan has not found any problems I have included the error codes and described the sequence in which they are presented to me I attach the logs however the copy of the entire CBS folder is too large as a zip to attach MB so I have only attached the most recent logs Oh yes and I have also quot lost quot my internal CD DVD-drive somewhere en route the driver has been identified as correct but it won't appear in file explorer anymore nor do music DVDs start up anymore when inserted So I can also not make recovery DVDs etc I am very much hoping someone can help me or maybe just tell me that it's OK to continue working without any Windows and Office updates coming in So far my main programs Outlook Firefox Word seem to be doing fine Thanks Gert

A:failed new Windows Update installer code 800F081F after code 80072EE2

Sounds likely to be a malware infection to me.
The error code you are getting implies that WU cannot access the servers at MS.

Please download and install Malwarebytes Anti-malware (free version) from http://www.malwarebytes.org/products/malwarebytes_free/ - UNtick 'Enable free trial of MBAM Premium' at the end of the installation - and update it, then run a full scan in your main account, and Quick scans in any other user accounts.

Quarantine everything it finds

http://www.sevenforums.com/windows-updates-activation/348502-failed-new-windows-update-installer-code-800f081f-after-code-80072ee2.html
Relevancy 84.28%

recently i have installed windows 7 and getting this message whenever im booting

Windows Failed to start. A recent hardware or software change might be the cuase

File: \$LDR$
Status: 0xc000000F
Info: The selected entry could not be loaded because the application is missing or corrupt.

I have tried to repair with my windows 7 CD but no success. Can some one help me?
P.S - could this error be something with language pack? because i installed and using korean language pack although i often get broken korean letters.

A:Boot error Windows Failed to start. A recent hardware or software change might be the

Anyone please HELP!!

http://www.techsupportforum.com/forums/f217/boot-error-windows-failed-to-start-a-recent-hardware-or-software-change-might-be-the-567690.html
Relevancy 84.28%

Ok so i've gone through this so many times now and search Google over and over again, did things that other people have tried and none have had any success.
I have 7 important and 5 optional and none of the important ever complete.
As the title says errors are code 57a and code 643
so if anyone could explain in step by step what i can do to fix this and complete the install i would be much appreciated.
I've tried so many things i can't really remember what exactly i've done so i'l just try whatever goes up and then see if it works.

A:Failed updates error 57a and 643

Welcome
Perhaps this MS article will help
When you try to install an update for the .NET Framework 1.0, 1.1, 2.0, 3.0, or 3.5, you may receive Windows Update error code &#34;0x643&#34; or Windows Installer error code &#34;1603&#34;

http://www.vistax64.com/windows-updates/290052-failed-updates-error-57a-643-a.html
Relevancy 84.28%

My hard to chang Recovery. recent A hardware failed Windows start. Error Windows software or drive stopped working so I bought a new one today along with Windows It was time for an upgrade anyway Took Windows Error Recovery. Windows failed to start. A recent hardware or software chang out all my RAM with the exception of one GB stick for the windows installation Installed the new hard Windows Error Recovery. Windows failed to start. A recent hardware or software chang drive booted from cd and clean installed windows everything was working great updated my drivers for everything installed some software and everythings working fine I shut down my computer opened it up and tried to put the rest of my Windows Error Recovery. Windows failed to start. A recent hardware or software chang RAM back in but when I started up the computer it froze halfway through the first screen before it even listed anything other than my cpu shut my computer down and started messing with the RAM trying to figure out if I had a bad stick and found out my computer wouldn t accept more than GB of RAM So I shut down again and messed with the RAM some more and now I ve got an error message and windows wont start up Windows Error Recovery Windows failed to start A recent hardware or software change might be the cause If windows files have been damaged or configured incorrectly Startup Repair can help diagnose and fix the problem If power was interrupted during startup choose Start Windows Normally Use the arrow keys to highlight your choice Option Launch Startup Repair recommended Option Start windows normally -Option takes me back to the error screen immediately while Option takes me to quot Starting Windows quot then quot Windows is loading files quot then restarts the computer taking me back to the error screen Hitting F takes me to the safe mode menu where my options are Repair your computer Safe Mode Safe Mode with Networking Safe Mode with Command Prompt Enable Boot Logging Enable low-resolution video x Last Known Good Configuration advanced Directory Services Restore Mode Debugging Mode Disable automatic restart on system failure Disable Driver Signature Enforcement Start Windows Normally -All options lead to quot Windows is loading files quot followed by a restart Booting from Windows disc Press any key to boot from CD or DVD Choose an operating system to start or press TAB to select a tool Use the arrow keys to highlight your choice then press ENTER Option Windows Setup EMS Enabled To specify an advanced option for this choice press F Tools Option Windows Memory Diagnostic -Option one leads to quot Windows is loading files quot for about seconds quot Starting Windows quot Windows Boot Manager Windows failed to start A recent hardware of software change might be the cause To fix the problem Insert your windows installation disc and restart your computer Choose your language settings and then click quot Next quot Click quot Repair your computer quot If you do not have this disc contact your system administrator or computer manufacturer for assistance Status xc Info An unexpected error has occured Option After running the test x it says Status No problems have been detected yet I ve double checked all my cables and I m certain everything is plugged in correctly quadruple checking my hard drive connections Any configuration of RAM doesn t help including just the stick of gb currently set at gb-x- gb-x filling in the color coded slots closest to the cpu The only things I touched today was the hard drive and ram and all this hardware was working prior Any thoughts on where to go from here nbsp

A:Windows Error Recovery. Windows failed to start. A recent hardware or software chang

https://forums.techguy.org/threads/windows-error-recovery-windows-failed-to-start-a-recent-hardware-or-software-chang.911336/
Relevancy 84.28%

I am using HP Pavilion dm Notebook with Windows Home Edition installed Start-up Test DST: - Short FAILED Failed HD TOSHIBA MK GSX Hard drive GB nbsp Recently my laptop started to reboot frequently with some error overheating and DISK usage always I have tried to format the hard drive and tried to re-install it with Windows boot-up disk But it is not responding even for the F - System recovery option to format it I have then tried to run the HP - Start-up Test Failed - Short DST: FAILED System Diagonistics with running the Start-up Test first nbsp The result is as below nbsp Start-up Test Start-up Test Failed - Short DST: FAILED nbsp Memory Test PASSEDSMART Check PASSEDShort DST FAILED nbsp FAILURE IDU L X - C C-XD U G- SF PRODUCT IDXG PA AB nbsp Hard Disk ------------------As it looks like Hard Disk issue I ran the Hard-Disk Start-up Test Failed - Short DST: FAILED Test but Hard-disk test shows all are PASSED It is confusing whether it is really Hard drive issue Do I need to replace the Hard drive If so can I go for any hard drive or only Toshiba any issue in using other HD will have any issue with my mother board Please advise

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/Start-up-Test-Failed-Short-DST-FAILED/td-p/5698945
Relevancy 84.28%

I am using HP Pavilion dm Notebook with Windows Home Edition installed HD TOSHIBA MK GSX Hard drive GB Recently my laptop started to reboot frequently with some error overheating and DISK usage always I have tried to format the hard drive and tried to re-install it with Windows boot-up disk But it is not responding even for the F - System recovery option to format it I have then tried to run the HP - System Diagonistics with running the quot Start-up Test quot first The result is as below Start-up Test Memory Test PASSED SMART Check PASSED Short DST FAILED FAILURE ID U L X - C C-XD U G- SF PRODUCT ID XG PA AB Hard Disk ------------------ As it looks like Hard Disk issue I ran the quot Hard-Disk Test quot but Hard-disk test shows all are PASSED It Failed DST: Test Start-up FAILED - Short is confusing whether it is really Hard drive issue Do I need to replace the Hard drive If so can I go for any hard drive or only Toshiba any issue in using other HD will have any issue with my mother board Please advise

A:Start-up Test Failed - Short DST: FAILED

Please check with HP Technical Support. They will know what exactly the Failure ID means and advice you on the next course of action.

http://www.sevenforums.com/hardware-devices/398737-start-up-test-failed-short-dst-failed.html
Relevancy 84.28%

I am using HP Pavilion dm Notebook with Windows Home Edition installed HD TOSHIBA MK GSX Hard drive GB Recently my laptop started to reboot frequently with some error overheating FAILED - Short DST: Failed Test Start-up and DISK usage always I have tried to format Start-up Test Failed - Short DST: FAILED the hard drive and tried to re-install it with Windows boot-up disk But it is not responding even for the F - System recovery option to format it I have then tried to run the HP - System Diagonistics with running the quot Start-up Test quot first The result is as below Start-up Test Memory Test PASSED SMART Check PASSED Short DST FAILED FAILURE ID U L X - C C-XD U G- Start-up Test Failed - Short DST: FAILED SF PRODUCT ID XG PA AB Hard Disk ------------------ As it looks like Hard Disk issue I ran the quot Hard-Disk Test quot but Hard-disk test shows all are PASSED It is confusing whether it is really Hard drive issue Do I need to replace the Hard drive If so can I go for any hard drive or only Toshiba any issue in using other HD will have any issue with my mother board Please advise

A:Start-up Test Failed - Short DST: FAILED

Sounds like a failing hard disk, but the overheating thing is worrisome.

The TOSHIBA MK6465GSX is a 2.5" form factor SATA drive, 9.5 mm thick. You should be able to replace it with any drive with the same dimensions. (You probably can use a thinner drive, but a spacer may be needed to mount it.) That includes SSDs that are intended as laptop HD replacements.

I see that there are a couple of YouTube videos showing how to replace the HD for your model laptop.

http://www.tenforums.com/drivers-hardware/57023-start-up-test-failed-short-dst-failed.html
Relevancy 83.85%

Hi there When I turn on the computer I get the following message Windows Error RecoveryWindows failed to start A recent hardware or software change might be the cause If windows files have been damaged or configured incorrectly startup repair can help diagnose and fix the problem If power was interrupted during startup chose start windows normall Launch Startup repair recommended Start Windows NormallyBoth options return to the same screen All the F options send me back to the same screen I can t boot in safe mode so I can t run your diagnostics I don t have the boot disk for this computer I Boot won't Recovery "Windows Windows to W7 start" failed Error can get it to the low level bios pageIt W7 won't Boot "Windows Error Recovery Windows failed to start" is a Dell Studio laptop about years oldModel PP LSvc Tag RZJRN I have express svc code and am registered to that account W7 won't Boot "Windows Error Recovery Windows failed to start" It is out of warranty This problem showed up after my sun downloaded W7 won't Boot "Windows Error Recovery Windows failed to start" something from quot Newgrounds quot Can you help Thanks John F

A:W7 won't Boot "Windows Error Recovery Windows failed to start"

Hello and welcome to Bleeping Computer! I am HelpBot: an automated program designed to help the Bleeping Computer Staff better assist you! This message contains very important information, so please read through all of it before doing anything. We apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here. To help Bleeping Computer better assist you please perform the following steps:*************************************************** In order to continue receiving help at BleepingComputer.com, YOU MUST tell me if you still need help or if your issue has already been resolved on your own or through another resource! To tell me this, please click on the following link and follow the instructions there.CLICK THIS LINK >>> http://www.bleepingcomputer.com/logreply/462984 <<< CLICK THIS LINK If you no longer need help, then all you needed to do was the previous instructions of telling me so. You can skip the rest of this post. If you do need help please continue with Step 2 below.*************************************************** If you still need help, I would like you to post a Reply to this topic (click the "Add Reply" button in the lower right hand of this page). In that reply, please include the following information:If you have not done so already, include a clear description of the problems you're having, along with any steps you may have performed so far.A new DDS and GMER log. For your convenience, you will find the instructions for generating these logs repeated at the bottom of this post.
Please do this even if you have previously posted logs for us.If you were unable to produce the logs originally please try once more.If you are unable to create a log please provide detailed information about your installed Windows Operating System including the Version, Edition and if it is a 32bit or a 64bit system. If you are unsure about any of these characteristics just post what you can and we will guide you.Please tell us if you have your original Windows CD/DVD available. Upon completing the above steps and posting a reply, another staff member will review your topic and do their best to resolve your issues.Thank you for your patience, and again sorry for the delay.*************************************************** We need to see some information about what is happening in your machine. Please perform the following scan again: Download DDS by sUBs from one of the following links if you no longer have it available. Save it to your desktop.DDS.comDouble click on the DDS icon, allow it to run. A small box will open, with an explanation about the tool. No input is needed, the scan is running. Notepad will open with the results. Follow the instructions that pop up for posting the results. Close the program window, and delete the program from your desktop.Please note: You may have to disable any script protection running if the scan fails to run. After downloading the tool, disconnect from the internet and disable all antivirus protection. Run the scan, enable your A/V and reconnect to the internet. Information on A/V control HERE We also need a new log from the GMER anti-rootkit Scanner. Please note that if you are running a 64-bit version of Windows, you should not bother creating a GMER log. Please first disable any CD emulation programs using the steps found in this topic: Why we request you disable CD Emulation when receiving Malware Removal Advice Then create another GMER log and post it as an attachment to the reply where you post your new DDS log. Instructions on how to properly create a GMER log can be found here: How to create a GMER logAs I am just a silly... Read more

http://www.bleepingcomputer.com/forums/t/462984/w7-wont-boot-windows-error-recovery-windows-failed-to-start/
Relevancy 83.85%

Windows Error Recovery Windows failed to start. A hardware or software change might be the cause.

Unable to start my laptop.

Tried to install Windows xp but getting this error message
Setup did not find any hard disk drives" during Windows XP Installation

Operating system is Vista and it a dell inspiron 1525 laptop.

Please help.

A:[SOLVED] Windows Error Recovery Windows failed to start

Hi is the hdd recognised in the bios

http://www.techsupportforum.com/forums/f217/solved-windows-error-recovery-windows-failed-to-start-495937.html
Relevancy 83.42%

I got error code 9c48 when trying to install the important update for IE9. Not only has the update failed, but it has caused IE9 to be inoperable, resulting in NO browser. I can't seem to find any solution. Please help.

A:IE9 Update Failed - Error code 9c48

Try a system integrity scan
RUN > CMD > SFC /SCANNOW

Also try using firefox to access the net,then uninstall IE & download to install IE9 again.

You can try rolling back to your previous ver as well.

http://www.sevenforums.com/windows-updates-activation/165023-ie9-update-failed-error-code-9c48.html
Relevancy 83.42%

Any idea why it won't install on my brand new machine with tons of memory & hard drive?
 

https://forums.techguy.org/threads/win10-failed-error-code-80070057.1156425/
Relevancy 83.42%

Hello I recently received a message on my laptop saying my Hard Drive was failing so I proceeded to buy a brand new external hard drive to back up all my files When I am backing it up it gets all the way to and then it ends saying it wasn't successful with the Error code x D The error message says 'The operation failed due to a device error encountered with either the source or the destination If the source or destination volume is on a disk run CHKDSK R on the source or destination volume and then retry the operation Details The request could not be performed because of an I O device error I have looked up solutions online and done CHKDSK Back failed, 0x8078012D code: error up R for both C and G where the external hard drive is connected to multiple times I have also turned off my security software while performing the back up and I have also set Volume Shadow Copy and Windows Backup Service to manual in the Services Window I also run on Windows I really need this back up to work because I don't want to lose all my files I would really appreciate any help at all Cheers

http://www.tenforums.com/performance-maintenance/63188-back-up-failed-error-code-0x8078012d.html
Relevancy 83.42%

I am getting the same failed back up error message, but for a different cause.

A:Backup Failed error code 0x81000019

See if this helps you (this should also work with Vista) windows 7 backup error "shadow copy could not be created"

http://www.vistax64.com/general-discussion/280309-backup-failed-error-code-0x81000019.html
Relevancy 83.42%

I'm getting this error but I can still print locally and from the network I have googled this Failed Operation Code Spooler 315, Error forum and have not found a solution Seems like a lot of people have this error if there a fix yet Log Name Microsoft-Windows-PrintService Admin Source Microsoft-Windows-PrintService Date AM Event ID Task Category Sharing a printer Level Error Keywords Classic Spooler Event Error Code 315, Spooler Operation Failed Printer User SYSTEM Computer Biostari -PC Description The print spooler failed to share printer hp deskjet c with shared resource name hp deskjet c Error The printer cannot be used by others on the network Event Xml lt Event xmlns quot http schemas microsoft com win events event quot gt lt System gt lt Provider Name Error Code 315, Spooler Operation Failed quot Microsoft-Windows-PrintService quot Guid quot EF FD-E - D -B - C F A quot gt lt EventID gt lt EventID Error Code 315, Spooler Operation Failed gt lt Version gt lt Version gt lt Level gt lt Level gt lt Task gt lt Task gt lt Opcode gt lt Opcode gt lt Keywords gt x lt Keywords gt lt TimeCreated SystemTime quot - - T Z quot gt lt EventRecordID gt lt EventRecordID gt lt Correlation gt lt Execution ProcessID quot quot ThreadID quot quot gt lt Channel gt Microsoft-Windows-PrintService Admin lt Channel gt lt Computer gt Biostari -PC lt Computer gt lt Security UserID quot S- - - quot gt lt System gt lt UserData gt lt ShareFailed xmlns auto-ns quot http schemas microsoft com win events quot xmlns quot http manifests microsoft com win windows printing spooler core events quot gt lt Param gt lt Param gt lt Param gt hp deskjet c lt Param gt lt Param gt hp deskjet c lt Param gt lt ShareFailed gt lt UserData gt lt Event gt

A:Error Code 315, Spooler Operation Failed

This Tech net article should be of help:

Event 315 with error 2114 on startup - Microsoft Reduce Customer Effort Center - Site Home - TechNet Blogs

http://www.sevenforums.com/bsod-help-support/277060-error-code-315-spooler-operation-failed.html
Relevancy 83.42%

This one has me boggled. I've searched high low looking for a solution to this issue without any success thus far. As the title of the thread say, I've been unable to install SP1.

Link to my CBS directory (zipped): https://skydrive.live.com/redir?resi...6E21F538FA!107

SFC /SCANNOW reported no errors.

Let me know if you need anything else and thanks for the help.

The error message says, "Windows Update encountered an unknown error"

A:Win 7 x64 SP1 Update Failed, Error Code 80070002

There's no sign in your CBS.log file that SFC actually ran.
an 0x80070002 error is actually a 'File not found' error, and often means that a registry entry is pointed in the wrong direction, rather than that a file is missing.

Is your machine showing any other signs of problems?

http://www.sevenforums.com/windows-updates-activation/269020-win-7-x64-sp1-update-failed-error-code-80070002-a.html
Relevancy 83.42%

Trying to restore Emachine E28 laptop.
After last install disk runs I receive the following message:
Restore failed. Error code = 045 (WIM ApplyImage cannot apply image. the request could not be performed because of an I/O device error.)
Have tried almost everything I can think of but no results.
Would someone be able to help?

A:Restore failed Error code = 0x45

Please clarify what you mean by "restore", system restore? Repair? Restore to factory condition using the built in recovery console? Using restore disks? Did you create/purchase/download & burn the restore disc set?

What symptoms/behavior/ problems...etc led you attempting to restore? Any recent hardware/software/changes/problems that may or may not contribute to these problems? Potential helpers need more to go on.

Just my .02

http://www.bleepingcomputer.com/forums/t/439386/restore-failed-error-code-0x45/
Relevancy 83.42%

WOW has this problem been driving me buggers all day I ve been attempting to download various software programs including quot Registry Mechanic quot yes ironic isn t it and keep getting the following error message C Program Files Registry Mechanic Activate dll An error occurred while trying to rename a file in the destination directory Movefile Failed Code The process cannot access the file because it is being used by another process Click to retry again Ignore not recommended or Abort to cancel installation Phooey what a headache Lots of Goole searching and what few hits I turn up seem to be virtually useless Most hits seem to indicate a problem with Bitdefender I do not have Bitdefenderalthough I did use their on-line scanning process just last week Drove me crazy looking for a clue in program files etc Finally went to Internet Options where it gave me the option to quot delete the Bitdefender on-line scanner quot which accomplished absolutely nothing whatsoever Oh woe is me - Anyway a couple of those 32 Error message--> failed Movefile Code google hits also suggested that Bitdefender would possibly cause --- gt bdss exe that could be the culprit Embarassed to concede I wasn t sure how to proceed Error message--> Movefile failed Code 32 at that point to even delete or somehow negate the quot bdss exe quot problem IF that even has anything to do with it I m running on Windows XP And I did manage to download CCleaner and give that route a shot to no avail Does anybody have some thoughts had prev probs with this If so please feel free to walk me through this like a -year-old Much obliged

A:Error message--> Movefile failed Code 32

This error is related to installed antivirus, antispyware, or behavior Guard type software on a machine. I was able to get rid of the message and complete installation on a friend's machine by "suspending" PC Tools' "Threatfire." Norton is another one that will do the same thing, however, on selective machines.

After done installing, you may re-enable the program and the installed application will work fine.

None of the other solutions that were suggested by other forums worked for me either. Remember, cleaning up registry will, most probably cause more harm then good. Good luck.

http://www.bleepingcomputer.com/forums/t/185694/error-message-movefile-failed-code-32/
Relevancy 83.42%

I was going to post this in the software section but I assumed since it pertains to the network portion of the application and that I can connect through a VPN that the problem is LAN Network oriented Hello I recently installed the software Raidcall RaidCall- FREE Group Communication Software- IM Group Communication and Voice Chat Error 23 Raidcall Code Connection - Failed: which is a program designed to be a cross between Skype and Ventrilo I avidly registered and the process went smoothly That was all until I came up to login screen where after entering my information I got Connection Failed: Error Code 23 - Raidcall the following error Connection Failed please try again later Error code Does this have something to do with Cyclic Redundancy Checking That's the only information I could come up with I've done as much research as I can think of sent them an email with lots of information no response as to the answer yet and also asked on their forums but no dice Background information I can provide more if needed - On a University Campus Technical Information IT Indiana Wesleyan University -I quot m connected directly through to their wall I quot ve also tried swapping out my own cables to no avail - Have done an Error Checking Check for both drives for CYC relation - which I think it may be the culprit I quot m not tech savy though hence my forum post - I CAN connect to it through a VPN Hotshield - obviously I don't want to have this be my way of connecting through it because I want to use Raidcall while playing World of Warcraft and it gives me horrible latency - I've called my IT support here at school and they didn't think it would be something on their end Although the guy on the other end did not sound intelligible at all Thanks for all your help I really appreciate it

A:Connection Failed: Error Code 23 - Raidcall

Also haveing same issue. Friends dont have a problem but I can not connect. I just googled the error code and this was at the top.

http://www.sevenforums.com/network-sharing/263071-connection-failed-error-code-23-raidcall.html