Windows Support Forum

Error Code: 800736B3 with 7 failed updates

Q: Error Code: 800736B3 with 7 failed updates

For months now I've had windows tell me that I have some updates to be installed. Every time I try it fails to update giving me the error code: 800736B3.

Relevancy 100%
Preferred Solution: Error Code: 800736B3 with 7 failed updates

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Error Code: 800736B3 with 7 failed updates

also my cbs.log was too big to fit in that one post so i had to make another one.

http://www.sevenforums.com/windows-updates-activation/343776-error-code-800736b3-7-failed-updates.html
Relevancy 101.91%

Hello, I am having a small issue with Windows update. Windows 7 Home Premium, 64BIT OEM on HP Pavilion.

Window Update failing error code 800736B3

I have followed the SFC, update readiness, and clean boot procedures listed in the thread I linked above. I believe I have a SIMILAR issue (not the same).

Can anyone give me a light in the proper direction?

SFC found nothing, readiness tool ran and installed hotfix but did not fix issue. I also tried to install updates 1 at a time, to not avail, as well as the clean boot.

Based on my checksur log, I have the following:

Checking Package Watchlist
(f) CBS Watchlist Package Missing 0x80070002 Microsoft-Windows-Embedded-SKU-Foundation-Package~31bf3856ad364e35~amd64~~0.0.0.0 Microsoft-Windows-InternetExplorer-Package~31bf3856ad364e35~amd64~~10.2.9200.16521 Package registry presence failed, possibly an orphaned package on package watchlist

But I am unsure where to go or how to continue at this point. Any sugegstions?

http://www.sevenforums.com/windows-updates-activation/381411-update-error-800736b3-updates-failed.html
Relevancy 100.19%

Hi after successfully installing windows my first windows install since XP after which I moved to Ubuntu and doing the initial set-up etc installing my own anti virus software and MS Office etc I thought it was time to let it update itself however every time I tell it to update then shut down it fails I tried to troubleshoot updates failing 800736B3 with 7 Windows code error it using the MS help box which was very little actual help and then tried to initiate the update manually however when it comes to installing some windows security and system updates and some IE updates installation fails resulting in error code B whatever that means The updates it fails on are Quote security update for INternet explorer for windows KB security update for windows KB security update for windows KB update for Windows 7 updates failing with error code 800736B3 internet explorer compatability view list for windows KB update for internet explorer for windows KB update for windows KB I'm currently running avast v home edition following win informing me that it would not allow AVG to run it was from an 'untrusted source' apparently despite having been working a few days previously but thats another problem entirely Any help than can be offered will be much obliged All I've been able to Windows 7 updates failing with error code 800736B3 turn up from googling is a command that un-registers windows which then for some reason allows the updates to occur following which I can use my original activation code given to me by digital river with the student upgrade deal to re-activate windows although I am reluctant to try this Many thanks civint

A:Windows 7 updates failing with error code 800736B3

Have never had Avast free home interfere with anything, but you can disable it to try the Updates by right clicking it's icon in system tray and "turn off real time protection"

I note that another recent thread on this error found by Googling also remains unresolved.

If you bought your Win7 retail, you are entitled to MS excellent tech support which will work the case through to satisfaction. Those Updates are standard and can wait a few days.

http://www.sevenforums.com/installation-setup/36366-windows-7-updates-failing-error-code-800736b3.html
Relevancy 90.3%

Hi! Since the beginning of may (May 3rd) every update has failed and they've been stacking up to the point where there's now 25 updates I've missed.

I've googled the issue and tried running "Fixit" and CheckSUR but nothing has helped.
I'm now desperate and annoyed because of all this. That's why I'm coming to you on this forum. You seem to have a lot of knowledge on these topics.

Since I'm new to this, I don't really know which files and logs to attach so if someone explained it to me I'll be able to post them ASAP

A:25 failed updates - 800736B3

I'm not one of the experts you are needing but they will want you to do this first.

A tutorial by tom982

Windows Update Posting Instructions

http://www.sevenforums.com/windows-updates-activation/344038-25-failed-updates-800736b3.html
Relevancy 87.29%

anybody have any ideas?
have tried sfc /scannow
also the steps in this Windows Update Error 80246008 in Windows 7 - Fix
but to no avail, i still receive the error message

i have also used take ownership on the downloader file in programdata/microsoft/network
and was able to start bits service once i then re enabled windows update. it hung for awhile so i restarted and got the same error for bits, tried take ownership again, but still get the same error
screenshot included

A:Windows Updates Failed BITS failed to start error code 2147024894

Please follow the Windows Update Posting Instructions and post the requested data
If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

Also...

Open Event Viewer
click on the Windows logs entry in the left pane to expand it.
Now click on the Application entry - wait while it loads.
Click on 'File' in the menu bar and select Save...
Save the file as Appevt.evtx
Repeat for the System log
then zip both, and upload them.

http://www.sevenforums.com/windows-updates-activation/334252-windows-updates-failed-bits-failed-start-error-code-2147024894-a.html
Relevancy 81.7%

I have had numerous updates fail and I have no idea why, i've done a few methods such as using FixIt, sfc /scannow and checksur and nothing has worked so far, i'm running windows 7 64 bit,

thanks in advance!

A:Updates failed error code 80070308

Please follow the Windows Update Posting Instructions and post the requested data

If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

Please also post the C:\Windows\windowsudpate.log file

http://www.sevenforums.com/windows-updates-activation/367407-updates-failed-error-code-80070308-a.html
Relevancy 81.7%

Hello,
I have been trying for sometime to fix this problem of failed updates. I have been in touch with microsoft and followed all their instructns this is where i am at. The last thing i did was to rename the file for updates. This did not work but has wiped clean all my update history and since then i am not recieving any updates at all, previously i was getting some but not the security updates.

I have also run all malware progs etc and do not detect any virus or anything

I am at a loss now on my next course of action i have not recieved any further instruction form microsoft
Any help would be appreciated thanks

A:Failed updates error code 80070490

Hi Welshwizard,

The error does indeed say that the file managing Windows Updates, the file that contains all relevant data as to what updates are installed, when they were installed etc, has been corrupted.

As I don't know what instructions you were given by them;

1.
Open up an elevated administrator Command prompt.
Run this command:
sfc /scannow
Let us know the results.

2.
Insert the Installation DVD.
Reboot the machine > Run the automatic repair.

3.
Boot the machien into Safemode with Networking, see what the updates says.

http://www.techsupportforum.com/forums/f217/failed-updates-error-code-80070490-a-602066.html
Relevancy 81.7%

So I casually installed some updates with Windows Update Several updates failed I restarted computer as prompted Next Code:8000FFFF failed, Error Updates thing I know I get bombarded with or more pop-ups telling me Updates failed, Error Code:8000FFFF things like quot The cordinal could not be located in the dynamic link library iertutil dll quot among other Updates failed, Error Code:8000FFFF similar messages Most programs wont open anymore chrome starts up but it wont connect anywhere To make it extra odd the only reason I can type this message here is because Firefox still works perfect Not sure what to do I've tried the following Scf scannow - Found some corrupt DLL files restarted and problem persists Manually uninstall all the updates that I installed today I managed to delete all except two of them Tried uninstalling those updates using CMD with wusa command no success All I get is this error message quot Installer encountered an error x c quot I should mention that I do not have System Restore or Backup activated The quot cordinal quot message shows up like shown in the attachment but several times with different programs EDIT Added CBS log

A:Updates failed, Error Code:8000FFFF

Please follow this tutorial and post an MGADiag report.

http://www.sevenforums.com/windows-updates-activation/234159-windows-genuine-activation-issue-posting-instructions.html

Ignore errors produced when clicking on the Copy button - they simply mean that the tool could not create the backup files for some reason. The data is still copied to the clipboard for pasting to your response.

http://www.sevenforums.com/windows-updates-activation/357597-updates-failed-error-code-8000ffff.html
Relevancy 81.7%

so I tried to update the MSE today, but it failed with the description of failure followed:

error code: 0xc8000222
error description: cancel the scan

what's actually wrong with it? what should I do to be able to update the MSE? thanks in advance.

A:MSE updates failed, error code 0xc8000222

zephychan,

Are you having problems with Windows Update also?

Please do the following:
Downloading Farbar Service Scanner

Save to the Desktop.



Make sure the following options are checked:Internet Services
Windows Firewall
System Restore
Security Center
Windows Update
Windows Defender
Press: Scan

FSS creates a log, FSS.txt, on the Desktop.

Please provide the FSS.txt in your reply.


Also, let's see what your system shows with the following short scan...

Please download RogueKiller:
http://tigzy.geekstogo.com/roguekiller.php

Select the 32-bit version for your system.
Click the dark-blue button to download.
Save to the Desktop.

Close all windows and browsers.
Right-click and select: Run as Administrator

At the program console, wait for the prescan to finish. (Under Status, it says: Prescan finished.)
press: SCAN

When done, a report opens on the Desktop: RKreport.txt

Please provide the RKreport.txt (Mode: Scan) in your reply.

http://www.sevenforums.com/system-security/281314-mse-updates-failed-error-code-0xc8000222.html
Relevancy 80.84%

hey everyone, i'm using windows 7 home premium, but when i want to update my windows it always failed, it says error code of 80070057 . but those occurs on update for hotfixes and security update, updates like ms silverlight and ms office ran just fine, why is that?

sincerely,
fadli

A:always getting failed updates, shows error code 80070057

Did you try Googling the error code.

http://www.sevenforums.com/windows-updates-activation/197188-always-getting-failed-updates-shows-error-code-80070057-a.html
Relevancy 80.84%

I have been unable to install Windows updates since mid-December, and now have some 11 outstanding.

My machine is a 5 year old Acer Aspire M3910 64 bit Intel Core i3 CPU 540 @3.07GHz with 8GB RAM running Windows 7 Home Premium SP1.

I have downloaded and installed the System Update Readiness Tool from the Microsoft site. However the CBS.zip file generated from the CBS file produced by running this tool is some 12 MB in size and falls foul of the 8MB limit imposed by the forum, and I cannot attach it. How do I get over this?

I have also run SFC /SCANNOW, but it identified no issues.

Help to resolve this updating error would be very much appreciated.

Thank you in advance!

http://www.sevenforums.com/windows-updates-activation/390239-updates-failed-install-error-code-80071a91.html
Relevancy 80.84%
A:Error Code 800B0100 8 failed windows updates

  
Quote: Originally Posted by fragital


dfgsdfgsfg


If you want assistance, don't post gibberish. Try letting us know what problems are, and what you have tried to solve them.

http://www.sevenforums.com/windows-updates-activation/304268-error-code-800b0100-8-failed-windows-updates.html
Relevancy 80.84%

Hi,

Since 10/07/2014 I am having serious problems with 9 updates in Windows Update.
I just took a look at some other topics in this forum section and it seems I am not the only one having these problems.

I've already tried several things i've found on the internet, but nothing really nothing worked out for me.
I've tried the hotfix, didn't work out; i've tried multiple CMD commands, didn't work out; i've tried to rename the catroot2 folder, didn't work out either...

Is this problem common? Because most of the updates are important; so i'd like them to be installed and they keep on failing every day since then.

If I need to post or upload something, please tell me, because i'm not a computer expert ;-)

Thanks in advantage,
Blizzard9041

A:Failed to install 9 updates: Error Code 80070308

Please open an elevated Command Prompt, and run the following command,

REG LOAD HKLM\COMPONENTS C:\Windows\System32\config\COMPONENTS
REG QUERY HKLM\COMPONENTS


post the results.


Here are some instructions to make life easier

1) To open an Elevated Command Prompt Window (the ECP window), click on Start, All Programs, Accessories – then right-click on Command Prompt, and select Run as Administrator. Accept the UAC prompt.
2) To run the commands easier, highlight the block of commands, and right-click on the highlight – select Copy. In the CP Window, click on the black/white icon at top left – select Paste. The commands will run but may not complete the last command, so hit the Enter Key once.
3) To copy the results... click on the Black/White icon in the top left, and select Edit... 'Select All', and hit the Enter key - then use Ctrl+V or r-click+Paste to paste it into your response.

http://www.sevenforums.com/windows-updates-activation/338122-failed-install-9-updates-error-code-80070308-a.html
Relevancy 80.84%

Several failed Windows 7x64 updates (see attachements)

error code 800B0003

Attachment 352135

Ran SURT
Ran sfc/scannow in elevated prompt. It found errors that it could not fix.
Note: I could not upload the entire CBS folder as a rar or a zip,( I kept getting a 505 error) so I uploaded the cbs log file.

A:Windows 7 failed updates error code 800B0003

I need tha CheckSUR.log file as well please... and the c:\windows\windowsupdate.log file

http://www.sevenforums.com/windows-updates-activation/363672-windows-7-failed-updates-error-code-800b0003.html
Relevancy 80.84%

Good Afternoon,

I am also having problems installing updates with the error code 80070308.

I have spent this afternoon reading the other posts and following the Windows Update Posting Instructions thread so hopefully I've gathered has much info as I can.

I downloaded and ran the System Update Readiness Tool. Once the installation was complete I tried to reinstall the updates. This resulted in the successful installation of: Hotfix for Windows (KB947821) but the failed installation of the other 9 updates as before.

Attachment 325390

And I received the following error code.

Attachment 325391

I then carried out the sfc/scannow which all came back OK.

Attachment 325392

I have saved the logs as a zip file but its too big for me to upload (12.5MB)? Any suggestions?

I hope I have not missed anything out. But please bear with me if I have.

Any help/advice would be appreciated.

Thanks in advance.

Kerry

A:Failed to install updates: Error Code 80070308

This is becoming a common problem with the latest batch of updates - MS are looking into it (we are led to understand)
I'll add this thread to the action-list for our contact.

http://www.sevenforums.com/windows-updates-activation/337797-failed-install-updates-error-code-80070308-a.html
Relevancy 80.84%

Alright First of all thanks to those who at least read this I'll also start by saying this isn't my first attempt at resolving this The first try left me beaten Code Error 643 Updates Failed: .NETFX Multiple broken bruised and I gave up So lets recap there About months ago I attempted to install a NETFX update believe it was I received error code I let it go for a week or two until a program required the update So I tried several quot fixes quot from Microsoft to resolve The final attempt being to uninstall ALL of NETFX and manually re-install each one individually I waited a few more days for that one Finally went to give it a go I made a list of the packages I needed to re-install and then Multiple .NETFX Updates Failed: Error Code 643 used the cleanup tool to remove them all Finished the uninstall and then restarted Reboot Attempt a manual install NETFX cannot be installed error code I tried and tried and tried and tried but nothing Finally I just gave up I still use the computer everyday but the errors are piling up Little things not working anymore and performance has taken a pretty major hit The only resolve I could find if the previous steps didn't work is to format and install That's not really an option My hard drives are sorted and there's pieces all over There's well over applications that I CONSISTENTLY use and many are LARGE and would take DAYS o re-install I didn't then nor do I now have the time to do that I realize my options are cut really short at this point but I'm wondering what all my options are I need the registry to stay mostly in tact I thought about upgrading to windows which I'd rather not do in hopes it would resolve it but I'm really not an fan Not hating for those that do but I like The other option I heard was an overlay install Essentially using the install disc to quot upgrade quot over the OS I like this option but it seems certain information doesn't transfer though I haven't clearly understood what does and what doesn't get transferred The last options are slim Somehow figure out how to fix the update process or magically hope start up repair will resolve Thanks to anyone who read this wall of text and thanks in advance if anyone responds I love my computer almost to a crazy level but I'm almost to a point of unplugging it and walking away I hope someone has an answer Has anyone else had similar issues Were you able to resolve it I could include my windows log files but some are miles long from other issues WU gaves the same error for all failed updates Error Code SURT has been stuck at around for quot Installing Hotfix for Windows KB update of quot

A:Multiple .NETFX Updates Failed: Error Code 643

Here's the summary from your SFC data....

Code:
2013-12-02 00:27:16, Info CSI 00000355 [SR] Repairing 9 components
2013-12-02 00:27:16, Info CSI 00000356 [SR] Beginning Verify and Repair transaction
2013-12-02 00:27:16, Info CSI 00000358 [SR] Cannot repair member file [l:20{10}]"comuid.dll" of Microsoft-Windows-COM-ComPlus-UI-COMUID, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2013-12-02 00:27:16, Info CSI 0000035a [SR] Cannot repair member file [l:22{11}]"mspaint.exe" of Microsoft-Windows-mspaint, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2013-12-02 00:27:16, Info CSI 0000035c [SR] Repairing corrupted file [ml:520{260},l:88{44}]"\??\C:\Program Files (x86)\Internet Explorer"\[l:14{7}]"pdm.dll" from store
2013-12-02 00:27:16, Info CSI 0000035e [SR] Repairing corrupted file [ml:520{260},l:88{44}]"\??\C:\Program Files (x86)\Internet Explorer"\[l:20{10}]"msdbg2.dll" from store
2013-12-02 00:27:16, Info CSI 00000362 [SR] Repairing corrupted file [ml:520{260},l:76{38}]"\??\C:\Program Files\Internet Explorer"\[l:14{7}]"pdm.dll" from store
2013-12-02 00:27:16, Info CSI 00000364 [SR] Repairing corrupted file [ml:520{260},l:76{38}]"\??\C:\Program Files\Internet Explorer"\[l:20{10}]"msdbg2.dll" from store
2013-12-02 00:27:16, Info CSI 00000368 [SR] Repairing corrupted file [ml:48{24},l:46{23}]"\??\C:\Windows\SysWOW64"\[l:22{11}]"iesetup.dll" from store
2013-12-02 00:27:16, Info CSI 0000036a [SR] Repairing corrupted file [ml:48{24},l:46{23}]"\??\C:\Windows\SysWOW64"\[l:22{11}]"ieuinit.inf" from store
2013-12-02 00:27:16, Info CSI 0000036c [SR] Repairing corrupted file [ml:48{24},l:46{23}]"\??\C:\Windows\SysWOW64"\[l:24{12}]"iernonce.dll" from store
2013-12-02 00:27:16, Info CSI 00000371 [SR] Cannot repair member file [l:20{10}]"comuid.dll" of Microsoft-Windows-COM-ComPlus-UI-COMUID, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2013-12-02 00:27:16, Info CSI 00000372 [SR] This component was referenced by [l:202{101}]"Microsoft-Windows-Foundation-Package~31bf3856ad364e35~amd64~~6.1.7601.17514.WindowsFoundationDelivery"
2013-12-02 00:27:16, Info CSI 00000375 [SR] Could not reproject corrupted file [ml:48{24},l:46{23}]"\??\C:\Windows\SysWOW64"\[l:20{10}]"comuid.dll"; source file in store is also corrupted
2013-12-02 00:27:16, Info CSI 00000377 [SR] Cannot repair member file [l:22{11}]"mspaint.exe" of Microsoft-Windows-mspaint, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2013-12-02 00:27:16, Info CSI 00000378 [SR] This component was referenced by [l:202{101}]"Microsoft-Windows-Foundation-Package~31bf3856ad364e35~amd64~~6.1.7601.17514.WindowsFoundationDelivery"
2013-12-02 00:27:16, Info CSI 0000037b [SR] Could not reproject corrupted file [ml:48{24},l:46{23}]"\??... Read more

http://www.sevenforums.com/windows-updates-activation/313724-multiple-netfx-updates-failed-error-code-643-a.html
Relevancy 80.84%

Hello I can't do any windows updates they all fail with Error 0x80070005 code failed Microsoft error updates Code x Having read another post I am pretty sure I am infected but the post was closed so I apologize I don't know how to fix the problem THANKS IN ADVANCE I also can't boot into safe mode without getting the blue screen of death A problem has been detected and windows has been shut down to prevent damage to your computer STOP Microsoft updates failed error code 0x80070005 x B xF A xC x x When I boot up Normal I get the following error c DOCUME LWP LOCALS Temp exe Windows cannot find 'c DOCUME LWP LOCALS Temp exe' Make sure you typed the name correctly and then try again To search for a file click the start button and then click Search I have already updated and ran McAfee Spybot Ad-Aware and CClaner Each one cleaned up some files but I still can't do windows updates or boot into safe mode et DDS Ver - - - NTFSx Run by LWP at on Fri Internet Explorer Microsoft Windows XP Home Edition GMT - AV McAfee VirusScan On-access scanning enabled Updated B EE - - CDE-A A-DD BA FAD FW McAfee Personal Firewall enabled B - C F- -BDA - CA DA E Running Processes C WINDOWS system svchost -k DcomLaunch svchost exe C WINDOWS System svchost exe -k netsvcs C Program Files Intel Wireless Bin EvtEng exe C Program Files Intel Wireless Bin S EvMon exe C Program Files Intel Wireless Bin WLKeeper exe svchost exe svchost exe C Program Files Lavasoft Ad-Aware AAWService exe C WINDOWS system spoolsv exe C Program Files Intel Wireless Bin ZcfgSvc exe C WINDOWS Explorer exe C PROGRA Intel Wireless Bin XConfig exe svchost exe C Program Files Common Files Apple Mobile Device Support bin AppleMobileDeviceService exe C Program Files Bonjour mDNSResponder exe C WINDOWS system cisvc exe C Program Files Java jre bin jqs exe C Program Files Kodak printer center KodakSvc exe C Program Files McAfee SiteAdvisor McSACore exe C Program Files Dell QuickSet quickset exe C Program Files Synaptics SynTP SynTPEnh exe C WINDOWS stsystra exe C PROGRA McAfee MSC mcmscsvc exe c PROGRA COMMON mcafee mna mcnasvc exe C Program Files McAfee com Agent mcagent exe C Program Files Common Files InstallShield UpdateService issch exe c PROGRA COMMON mcafee mcproxy mcproxy exe C Program Files Intel Wireless Bin ifrmewrk exe C PROGRA McAfee VIRUSS mcshield exe C WINDOWS system igfxpers exe C Program Files Common Files Microsoft Shared VS DEBUG MDM EXE C Program Files Microsoft Office Office GrooveMonitor exe C Program Files CyberLink PowerDVD DVDLauncher exe C Program Files McAfee MPF MPFSrv exe C WINDOWS system dla tfswctrl exe C Program Files McAfee MSK MskSrver exe C WINDOWS system igfxsrvc exe C Program Files Microsoft SQL Server MSSQL MICROSOFTSMLBIZ Binn sqlservr exe C Program Files Common Files AOL ee AOLSoftware exe C Program Files Dell QuickSet NICCONFIGSVC exe C Program Files Java jre bin jusched exe C WINDOWS system ctfmon exe C Program Files Intel Wireless Bin RegSrvc exe C Program Files Dell Support Center bin sprtsvc exe C WINDOWS system svchost exe -k imgsvc C Program Files Messenger msmsgs exe C WINDOWS wanmpsvc exe C Program Files Microsoft SQL Server MSSQL MICROSOFTSMLBIZ Binn sqlagent EXE C PROGRA McAfee VIRUSS mcsysmon exe C Program Files Lavasoft Ad-Aware AAWTray exe C WINDOWS system cidaemon exe C Program Files Internet Explorer IEXPLORE EXE C Program Files Internet Explorer IEXPLORE EXE C Program Files Internet Explorer IEXPLORE EXE C Program Files Internet Explorer IEXPLORE EXE C Program Files Internet Explorer IEXPLORE EXE C Documents and Settings LWP Local Settings Temporary Internet Files Content IE B MHWJ dds scr Pseudo HJT Report uStart Page hxxp www aol com src toolbar uSearch Page about blank uSearch Bar about blank uDefault Page URL www google com ig dell hl en amp client dell-usuk amp channel us amp ibd uDefault Search URL about blank uSearchMigratedDefaultURL a f f e f f c e f d f mSearch Bar about blank mSearchMigratedDefaultURL a f f e f f c e f d f... Read more

A:Microsoft updates failed error code 0x80070005

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine.??If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.Upon completing the steps below another staff member will review and take the steps necessary with you to get your machine back in working order clean and free of malware.If you have already posted a DDS log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.Thanks and again sorry for the delay.We need to see some information about what is happening in your machine.??Please perform the following scan:Download DDS by sUBs from one of the following links.??Save it to your desktop.DDS.scrDDS.pifDouble click on the DDS icon, allow it to run.A small box will open, with an explanation about the tool.??No input is needed, the scan is running.Notepad will open with the results.Follow the instructions that pop up for posting the results.Close the program window, and delete the program from your desktop.Please note:??You may have to disable any script protection running if the scan fails to run.??After downloading the tool, disconnect from the internet and disable all antivirus protection.??Run the scan, enable your A/V and reconnect to the internet.??Information on A/V control HERE

http://www.bleepingcomputer.com/forums/t/274407/microsoft-updates-failed-error-code-0x80070005/
Relevancy 80.41%

I have lurked in this forum in the past - always finding answers. Thanks to all the experts contributing to this forum.

This time I joined so I could post, as I have been unable to find a solution to my problem.

I can install all updates except for SP1. I keep getting error 800736B3.

I ran the Update Troubleshooter, which claims to have repaired Win Update components - still same error.

I then successfully ran the hotfix KB947821. The same error occurs.

I ran sfc /scannow & no integrity violations were found.

I also tried again after a clean boot - same error.

I don't have a clue as to what to try now. Any suggestions?

A:Error Code 800736B3 on SP1 Update

Try reading here

Hopefully stuff in there will help.

http://www.sevenforums.com/windows-updates-activation/146628-error-code-800736b3-sp1-update.html
Relevancy 80.41%

Im getting this error code 800736B3. Can anyone help me.

A:error code 800736B3 installing SP1

Put the win7 disc in and choose upgrade then after that it will restart.

After you have acepted the upgrade it will allow you to install the sp1 .

Once win7 has upgraded ,but still keeping your system in tact ,will start the whole update process. After about a hour or two of updates it will install sp1 with no issue .

Also if you are useing a highend gaming card virus protect etc it might keep it from installing as well

http://www.sevenforums.com/windows-updates-activation/149630-error-code-800736b3-installing-sp1.html
Relevancy 80.41%

error installing updates KB2998812 , KB2977759 and KB976932 reverting changes

attaching CBS Logs collection

A:error code 80073AA2 and 800736B3

KB2998812 , KB2977759 installed, error code 80073AA2 solved by deleting WINEVT folder in registry

http://www.sevenforums.com/windows-updates-activation/354865-error-code-80073aa2-800736b3.html
Relevancy 80.41%

Hi Win SP fails installation with Error Code B I have tried a the solutions as suggested by microsoft without luck I also re-installed Win Ultimate using the Upgrade Win Installation 800736B3 SP1 7 Error Code option but the situation is unchanged According to the log of CheckSUR there is CSI missing identity and CSI Payload files missing CSI Below is the CheckSUR file contents Checking System Update Readiness Binary Version Package Version - - Checking Windows Servicing Packages Checking Package Manifests and Catalogs Checking Package Watchlist Checking Component Watchlist Checking Packages Checking Component Store f CSI Payload File Missing x jsproxy dll x microsoft-windows-i tocolimplementation bf ad e none a bc d dc f CSI Missing Identity x appid prnxx inf bf ad e ad fefc dc f CSI Payload File Missing x iiswmi mfl x microsoft-windows-i atibility resources bf ad e ar-sa a c b f fc Summary Seconds Win 7 SP1 Installation Error Code 800736B3 executed Found errors CSI Missing Identity Total count CSI Payload File Missing Total count CheckSUR persist contents Checking System Win 7 SP1 Installation Error Code 800736B3 Update Readiness Binary Version Package Version - - Checking Win 7 SP1 Installation Error Code 800736B3 Windows Servicing Packages Checking Package Manifests and Catalogs Checking Package Watchlist Checking Component Watchlist Checking Packages Checking Component Store f CSI Payload File Missing x jsproxy dll x microsoft-windows-i tocolimplementation bf ad e none a bc d dc f CSI Missing Identity x appid prnxx inf bf ad e ad fefc dc f CSI Payload File Missing x iiswmi mfl x microsoft-windows-i atibility resources bf ad e ar-sa a c b f fc Summary Seconds executed Found errors CSI Missing Identity Total count CSI Payload File Missing Total count Checking System Update Readiness Binary Version Package Version - - Checking Windows Servicing Packages Checking Package Manifests and Catalogs Checking Package Watchlist Checking Component Watchlist Checking Packages Checking Component Store f CSI Payload File Missing x jsproxy dll x microsoft-windows-i tocolimplementation bf ad e none a bc d dc f CSI Missing Identity x appid prnxx inf bf ad e ad fefc dc f CSI Payload File Missing x iiswmi mfl x microsoft-windows-i atibility resources bf ad e ar-sa a c b f fc Summary Seconds executed Found errors CSI Missing Identity Total count CSI Payload File Missing Total count How can I resolve this and install SP Thanks erwin

A:Win 7 SP1 Installation Error Code 800736B3

We need the CBS.log as well please...

Please follow the Windows Update Posting Instructions and post the requested data

http://www.sevenforums.com/windows-updates-activation/312694-win-7-sp1-installation-error-code-800736b3.html
Relevancy 79.98%

hello

i'm stuck with these 4 updates. i've tried fixit, the big 500mo windows update correction program, manual installation etc nothing works
i also have huge log files in my cbs folder (almost 5Go) . the cbs.log is almost 1Go

here are the updates :
kb2977629
kb2972211
kb2973112
kb2982378

thanks you for your help !

A:error 800736B3 on 4 updates

Please follow the Windows Update Posting Instructions and post the requested data
If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

http://www.sevenforums.com/windows-updates-activation/346737-error-800736b3-4-updates.html
Relevancy 79.98%

Hello, I was referred here from another forum topic.... Please follow this thread to review all my posthttp://www.bleepingcomputer.com/forums/t/257239/possible-memory-modules-infected/I can't get Windows to updating.... Error Code 80070490 with 11 failed updatesThank you for everyones help

http://www.bleepingcomputer.com/forums/t/265454/windows-not-updating-error-code-80070490-with-11-failed-updates/
Relevancy 79.55%

CBS.zip is attached. can anyone help with this error code. I cannot run windows update. This error code 800736B3 is the result every time. I have ran cmd spf scan, I have ran the window repair tools. Nothing will do it. Can someone please help?

A:Windows update error code 800736B3

Hello and welcome tenlakes mate I see you have done the sfc and I would suggest you run this as well if you haven't already
http://www.sevenforums.com/tutorials/433-disk-check.html < if necessary include the /f and /r in the command line as per Option2

just for another option you could run these they don't take long and will eliminate anything from that direction
http://www.superantispyware.com/
http://www.malwarebytes.org/products/malwarebytes_free/
http://www.bleepingcomputer.com/download/adwcleaner/
ADW download from bleeping computer delete any rubbish found with the malware scans
(NB If one is running Kaspersky security it may rant about ADW - just ignore it or disable Kaspersky while the ADW is being used)

http://www.sevenforums.com/windows-updates-activation/368372-windows-update-error-code-800736b3.html
Relevancy 79.55%

i run Windows 7 Ult 64bit w/PS1. My comps been running great, installing updates perfectly till now.. I have read alot of posts on this and i have tried everything that people have posted as remedies, but nothing seems to work. I am hoping i dont have to re-install Windows again, cause i just did it a week ago.. any help on this would be greatly appreciated

Operating System - MS Windows 7 Ultimate 64-bit SP1

CPU - Intel Core 2 Quad Q6600 @ 2.40GHz 38 ?C
Kentsfield 65nm Technology

RAM - 6.00 GB Dual-Channel DDR2 @ 332MHz (5-5-5-15)

Motherboard - Dell Inc. 0TP406 (CPU)

Graphics - DELL SE198WFP ([email protected])
1024MB GeForce GT 430 (nVidia) 36 ?C

Hard Drives - 313GB Seagate ST3320620AS (RAID) 37 ?C

Optical Drives - TSSTcorp DVD+-RW TS-H653B

Audio High - Definition Audio Device

A:Windows Update Error Code 800736B3

AS you have no replys, take a look at this link, do any of the methods in the accepted answer do anything for you.

Windows update fails to install updates with error code 800736B3 - Microsoft Answers

http://www.techsupportforum.com/forums/f217/windows-update-error-code-800736b3-606350.html
Relevancy 79.55%

Hi,

Whenever I try to run windows update it seems to fail, the error code i get is 800736B3.

I have followed the instructions and ran the hotfix and sfc scan however the problem still persists.

I have attached the files that i can, however when compressing the CBS folder it totals to 196MB so its impossible to upload here.

Any help would be much appreciated!

Thanks,

Tim

A:Windows Update Error Code: 800736B3

Hi,

I have now added a drop box link to the CBS folder:

https://www.dropbox.com/s/f920qsjxup5g4hk/CBS.zip?dl=0

Thanks,

Tim

http://www.sevenforums.com/windows-updates-activation/377776-windows-update-error-code-800736b3.html
Relevancy 79.55%

Hi,
I have a problem with Windows Update. Firstly, i got windows update servise not running message. Then I was download the System Update Readiness Tool when i start that i get this error code 0x8007000d. Finally I tried update in windows update again i get this error code 800736B3.
I would greatly appreciate any help with this.

A:Windows Update, error code 800736B3

We also need the CheckSUR.log file created by running the CheckSUR/SURT tool - even if incomplete, it may give us some clues.


Your SFC scan identified the following problems -

Code:
Line 9296: 2014-06-06 13:33:15, Info CSI 00000244 [SR] Repairing 7 components
Line 9297: 2014-06-06 13:33:15, Info CSI 00000245 [SR] Beginning Verify and Repair transaction
Line 9298: 2014-06-06 13:33:15, Info CSI 00000246 [SR] Cannot repair member file [l:22{11}]"lsi_sas.sys" of lsi_sas.inf, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, file is missing
Line 9299: 2014-06-06 13:33:15, Info CSI 00000247 [SR] Cannot repair member file [l:20{10}]"lsi_fc.sys" of lsi_fc.inf, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, file is missing
Line 9300: 2014-06-06 13:33:16, Info CSI 00000248 [SR] Cannot repair member file [l:32{16}]"bthmigplugin.dll" of Microsoft-Windows-BTH-USER, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, file is missing
Line 9301: 2014-06-06 13:33:17, Info CSI 00000249 [SR] Cannot repair member file [l:102{51}]"Microsoft-Windows-IIS-HTTPLogging-Deployment-DL.man" of Microsoft-Windows-Migration-DownlevelManifests, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, file is missing
Line 9302: 2014-06-06 13:33:17, Info CSI 0000024a [SR] Cannot repair member file [l:76{38}]"MediaServer-Multicast-Migration-DL.man" of Microsoft-Windows-Migration-DownlevelManifests, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, file is missing
Line 9303: 2014-06-06 13:33:17, Info CSI 0000024b [SR] Cannot repair member file [l:100{50}]"Microsoft-Windows-IIS-IPSecurity-Deployment-DL.man" of Microsoft-Windows-Migration-DownlevelManifests, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, file is missing
Line 9304: 2014-06-06 13:33:17, Info CSI 0000024c [SR] Cannot repair member file [l:30{15}]"winlogon-DL.man" of Microsoft-Windows-Migration-DownlevelManifests, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, file is missing
Line 9305: 2014-06-06 13:33:17, Info CSI 0000024d [SR] Cannot repair member file [l:24{12}]"msdtcstp.dll" of Microsoft-Windows-Migration-DownlevelManifests, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, file is missing
Line 9306: 2014-06-06 13:33:17, Info CSI 0000024e [SR] Cannot repair member file [l:44{22}]"TabletPCJournal-DL.man" of Microsoft-Windows-Migra... Read more

http://www.sevenforums.com/windows-updates-activation/333896-windows-update-error-code-800736b3.html
Relevancy 79.55%

Hi
You must get this a lot but I've tried every method mentioned before here.

I get this error when installing updates. Can someone guide me on how to troubleshoot it?

A:Windows Update Error Code 800736B3

What updates are you trying to install?

http://www.eightforums.com/windows-updates-activation/67057-windows-update-error-code-800736b3.html
Relevancy 79.55%

Hi, I've been receiving error code 800736b3 when trying to install 2 security updates and I don't know what the problem is.

A:Windows Update error code 800736b3

When this happens to me (just did - code 8007038) I install the updates one at a time.
Worked for me.

http://www.sevenforums.com/windows-updates-activation/334740-windows-update-error-code-800736b3.html
Relevancy 79.55%

Hi,

This is my first post, and not all that clever with pcs, so apologies in advance if I've missed something out.

I have been getting this error code repeatedly when trying to install update KB2922229 for a couple of months now. Never had any problems before. Other updates were installing just fine, but I am now getting the same error code when trying to install update KB2871997. As both of these updates seem to be related to security, I am getting a bit concerned.

I have followed the steps in the Windows Update Posting Instructions, running SURT and an SFC scan. Logs attached.

Hope someone will be kind enough to help with this.

A:Windows Update Error Code 800736B3

I have never seen such a CheckSUR summary before!

Code:
Summary:
Seconds executed: 94
Found 6833 errors
Fixed 6833 errors
CSI Catalog Missing Total count: 7
Fixed: CSI Catalog Missing. Total count: 7
CSI Missing Component Key Total count: 927
Fixed: CSI Missing Component Key. Total count: 927
CSI Missing Pinned Component Key Total count: 15
Fixed: CSI Missing Pinned Component Key. Total count: 15
CSI Missing Identity Total count: 2026
Fixed: CSI Missing Identity. Total count: 2026
CSI Missing C Mark Total count: 1617
Fixed: CSI Missing C Mark. Total count: 1617
CSI Payload File Missing Total count: 24
Fixed: CSI Payload File Missing. Total count: 24
CSI F Mark Missing Total count: 2232
Fixed: CSI F Mark Missing. Total count: 2232
The SFC scan is clear - which in view of the above, is rather surprising.

Have you tried installing the updates again since running the CheckSUR/SURT?

If not, please do so, and let us know what happens - First do a check for Updates, and see if the updates appear at all - they may not.

http://www.sevenforums.com/windows-updates-activation/332755-windows-update-error-code-800736b3.html
Relevancy 79.12%

Hi when running windows update all the updates fail and give the error code 800706F7. I have retried 3 times all to the same result. i have searched for this error code and the only results i found was about removing a previous 2014 update but this was not on my computer. i have ran the System Update Readiness Tool which installed 1 update however i can still not download the other updates

A:windows update error code 800706F7 54 important updates failed

Tried again and am now also getting error codes 80246007 and 8007002

http://www.sevenforums.com/windows-updates-activation/371496-windows-update-error-code-800706f7-54-important-updates-failed.html
Relevancy 79.12%

I have a HP DM W - Bit notebook PC I'm a very techy person and keep the machine very Code Feb-2013 80070057 KB2799494 Failed, Error W7-64bit Updates; clean I run Avast for A V protection run MalwareBytes from time-to-time to check too and both are clean The machine's use is for MS Office mostly Outlook with some web surfing I even use CCLeaner to keep the temp clutter out Yesterday MS released a bunch of updates W7-64bit Feb-2013 Updates; KB2799494 Failed, Error Code 80070057 and I have never had any issue installing before All updates installed except KB MS - Vulnerabilities in Windows kernel could allow elevation of privilege February It gave me error code so I downloaded MSI and ran on PC same error Download Security Update for Windows for x -based Systems KB from Official Microsoft Download Center I did some web surfing and not much out there on it update error code - Microsoft Community For the above I did run SFC SCANNOW and came back OK I even found this link through another thread that had the error referenced and recalled on other machines in past that NET Framework could be corrupted and cause issues The KB does not seem to be associated W7-64bit Feb-2013 Updates; KB2799494 Failed, Error Code 80070057 but I tried the MSI FIXIT and also NET repair steps no change still fails Error codes I do have Horzion RollBack RX on the machine but usually only keep a week of so of previous snapshots I also religiously image my HDD with Macrium Reflect I mention the RX install because I can set a restore point and try suggestions and return to prior state W7-64bit Feb-2013 Updates; KB2799494 Failed, Error Code 80070057 very easily So I am at my wits end on where to even start please provide suggestions Your help is most appreciated Regards Eric

A:W7-64bit Feb-2013 Updates; KB2799494 Failed, Error Code 80070057

Try to install patch again

Make a copy of C:\Windows\Logs\CBS\CBS.log (otherwise you can't open it)
Post that file and C:\Windows\WindowsUpdate.log as well

Zip them to make it smaller

http://www.sevenforums.com/windows-updates-activation/278301-w7-64bit-feb-2013-updates-kb2799494-failed-error-code-80070057-a.html
Relevancy 78.69%

Hi.
I have a problem with Windows Update. It continues to fail with error code 800736B3. I have tried the update troubleshooter for Windows, I have ran scannow, I also have installed the update readiness tool and hotfix.
Still the updates fail.
I would greatly appreciate any help with this.
I have included the CBS flolder contents.
Thank you in advance for any insight!!!!!
Attachment 310809

Attachment 310811

Attachment 310812

Attachment 310813

Attachment 310814

Attachment 310815

Attachment 310819

Attachment 310820

Attachment 310821

A:Window Update failing error code 800736B3

CheckSUR shows this...

Code:
Unavailable repair files:
winsxs\manifests\msil_mscorlib.resources_b77a5c561934e089_6.1.7601.17648_en-us_6687c1de75c8e03a.manifest
winsxs\manifests\msil_mscorlib.resources_b77a5c561934e089_6.1.7601.21768_en-us_4fbc1bb28f6e72ee.manifest
I'll post a fix for it later - I have to get to work now

http://www.sevenforums.com/windows-updates-activation/325648-window-update-failing-error-code-800736b3.html
Relevancy 78.69%

Hi.
I have a problem with Windows Update. It continues to fail with error code 800736B3. I have tried the update troubleshooter for Windows, I have ran scannow, I also have installed the update readiness tool and hotfix.
Still the updates fail.
I would greatly appreciate any help with this.

A:Window Update failing error code 800736B3

Please follow the Windows Update Posting Instructions and post the requested data

If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

http://www.sevenforums.com/windows-updates-activation/359540-window-update-failing-error-code-800736b3.html
Relevancy 78.69%

I've been trying to solve this for a few months now but I haven't gotten anywhere. I've followed all the instructions here and they still continue to fail.

Windows Update Posting Instructions
I would really appreciate any insight as to what you think may be causing the issue, reformatting would really set me back since this computer has some industry specific CAD programs that are a pain to setup.

thanks again,Mark

For some reason I cant post an attachment &quot;attach button doesn't respond, in fact none of them do&quot;, I'll add a reply to the thread to see if I can then.

Update: Sorry about the missing attachments, I moved them out of the folder and forgot to attach, there are a couple of older CBS Persist files if you need them.

thanks

Mark

A:Window Update failing error code 800736B3

The error code 9C59 appeared when I tried to add Internet Explorer 11 to the update, prior to that it wasn't there.

http://www.sevenforums.com/windows-updates-activation/360726-window-update-failing-error-code-800736b3.html
Relevancy 78.26%

Hello,

My Windows 7 x64 Home Premium updates are failing with error code 800736B3

I've tried the "Update Readiness Tool for Windows 7 x64" and they still fail.

I've tried SFC /SCANNOW and they still fail.

Please Help!!

Thank You!

Rob S.

A:Windows 7 Updates Failing Error 800736B3

Hello Rob,

Lets run SURT to see if it gives an indication of a corruption:

Download and run System Update Readiness Tool (SURT)
Please go Here and download the System Update Readiness Tool (SURT). Save this file to your desktop
Go to your desktop and run KB947821
When the SURT finishes installing, Please continue.
SFC /SCANNOW

Click on the button. Inside the search box type in CMD
Right click on CMD => Choose Run as Administrator
Inside the Command Prompt windows copy and paste the following command SFC /SCANNOW
Please wait for this to Finish before continuing with the rest of the steps.

Export CBS folder
Click the Start button then click Computer.
Double-click on the C: drive, under the Hard Disk Drives category, and then scroll down to, and double click on the Windows folder.
Find and double click on the Logs folder.
Right-click on the CBS folder, and select Copy.
Go back to your Desktop, right-click on it, and select Paste. You should now see a copy of the CBS folder appear on your Desktop called CBS.
Right-click on this new folder, and navigate through Send to, and select Compressed (zipped) folder.
A new file, also called CBS (CBS.zip), but this time with a different icon, will be created.
Attach this to your next post please.
Please Note:: if the file is too big to upload to you next please post please upload via Dropbox or ge.tt

http://www.techsupportforum.com/forums/f217/windows-7-updates-failing-error-800736b3-886089.html
Relevancy 78.26%

Hello,

My Windows 7 x64 Home Premium updates are failing with error code 800736B3

I've tried the "Update Readiness Tool for Windows 7 x64" and they still fail.

I've tried SFC /SCANNOW and they still fail.

Please Help!!

Thank You!

Rob S.
 

A:Windows 7 Updates Failing Error 800736B3

Which update is failing
 

https://forums.techguy.org/threads/windows-7-updates-failing-error-800736b3.1132460/
Relevancy 77.83%

Hi there,

I have a problem with Windows Update - it continually fails to install update KB2966583 (which is about 2.5MB) and brings up error code 800736B3. I have tried the update troubleshooter for Windows, the update readiness tool and hotfix.

Can anyone help me with this? Thanks in advance.

A:Windows Update KB2966583 fails, error code 800736B3

Please follow the Windows Update Posting Instructions and post the requested data
If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

http://www.sevenforums.com/windows-updates-activation/346121-windows-update-kb2966583-fails-error-code-800736b3.html
Relevancy 77.83%

Hello I'm having a problem installing Windows Updates on my Windows Home Premium -bit PC - the update process ends with the error code B see attached screenshot I have tried following several suggested courses of action I obtained from several sources none of which has resolved the problem including Methods amp of Microsoft's Windows update error code B failes to install KB - Microsoft Community sfc scannow 800736B3 Update Code - 7 64-bit Error Home Windows Premium - gt no errors reported System Update Readiness Tool - gt downloaded installed successfully - no errors reported After running both of these restarted my PC and then tried to install the Windows updates again - no luck same Windows 7 Home Premium 64-bit Update - Error Code 800736B3 error reported So now I will see if anyone here can help me Thank-you very much in advance for any assistance you can provide Kevin p s the CBS zip file I created as per the Windows Update Posting Instructions was MB so too large to post There are several large cab files in that folder CbsPersist cab - can I exclude those from the zip file Edit Added CBS zip file with log files Windows 7 Home Premium 64-bit Update - Error Code 800736B3 only from C Windows Logs CBS folder

A:Windows 7 Home Premium 64-bit Update - Error Code 800736B3

I'm trying to figure out what exactly this error code means... it's not as easy to find like BSOD bugcheck codes, lol.

What updates failed exactly?

http://www.sevenforums.com/windows-updates-activation/364460-windows-7-home-premium-64-bit-update-error-code-800736b3.html
Relevancy 76.97%

Windows 7 SP1 Home Premium.
I am no longer getting any security updates because the update for Windows Update fails with Error Code 800736B3.

SFC /SCANNOW reports no errors.
C:\Windows\system32>sfc /scannow
Beginning system scan. This process will take some time.
Beginning verification phase of system scan.
Verification 100% complete.
Windows Resource Protection did not find any integrity violations.

I have attached the CBS folder without the CbsPersist.cab files.

I have already tried the Microsoft KB How to update the Windows Update Agent to the latest version

Attachment 333503

A:Windows Update Agent 7.6.7600.320 Fails - Error Code 800736B3

There's nothing apparently amiss in any of the uploaded files.
Please upload the CBSPersist files, and the C:\Windows\windowsupdate.log file

http://www.sevenforums.com/windows-updates-activation/345786-windows-update-agent-7-6-7600-320-fails-error-code-800736b3.html
Relevancy 67.94%

Hello all, I am posting for my father-in-law who is having difficulty with these windows updates.

The error code is 800736B3.

I downloaded and ran SURT a few times, each time it reported success however the error is still active and there are 10 updates pending on windows update.

i also scanned several times sfc /scannow and nothing exciting came up.

Uploading my CBS.zip continues to time out so here is a link to google drive with the file:
https://drive.google.com/file/d/0B7V...it?usp=sharing

Thanks in advance for your help.

A:Code 800736B3

Thought it was fixed but i have the same error code again!

http://www.sevenforums.com/windows-updates-activation/339073-code-800736b3.html
Relevancy 66.65%

I've tried running many programs to fix this these problems Nothing is showing up in the scans I'm getting background audio failed audio Background windows code updates 80070216 - ads ads that are caused be a svchost exe process Killing the process stops the audio for a few minutes untile the process restarts itself I also have some windows updates that are failing with code DDS Ver - - - NTFS AMD Internet Explorer BrowserJavaVersion Run by Dodiyah at on - - Microsoft Windows Home Premium GMT - AV Background audio ads - failed windows updates code 80070216 McAfee Anti-Virus and Anti-Spyware Enabled Updated ADA C - F - - A- B E SP McAfee Anti-Virus and Anti-Spyware Enabled Updated C C - - - FA- E F F SP Windows Defender Enabled Updated D DDC A- F- fae- E -DA C ACF FW McAfee Firewall Enabled DA E - - D - - AD FE Running Processes C Windows system lsm exe C Windows system svchost exe -k DcomLaunch C Windows system nvvsvc exe Background audio ads - failed windows updates code 80070216 C Program Files x NVIDIA Corporation D Vision nvSCPAPISvr exe C Windows system svchost exe -k RPCSS C Windows system atiesrxx exe C Windows System svchost exe -k LocalServiceNetworkRestricted C Windows System svchost exe -k LocalSystemNetworkRestricted C Windows system svchost exe -k LocalService C Windows system svchost exe -k netsvcs C Program Files IDT WDM STacSV exe C Program Files x Common Files logishrd LVMVFM UMVPFSrv exe Background audio ads - failed windows updates code 80070216 C Windows system svchost exe -k NetworkService C Windows system WLANExt exe C Windows system taskeng exe C Windows System spoolsv exe C Windows system svchost exe -k LocalServiceNoNetwork C Program Files x Common Files EPSON EBAPI eEBSVC exe C Program Files IDT WDM AESTSr exe C Program Files EPSON EpsonCustomerParticipation EPCP exe C Program Files Hewlett-Packard HP Client Services HPClientServices exe C Program Files x Malwarebytes' Anti-Malware mbamscheduler exe C Program Files x Malwarebytes' Anti-Malware mbamservice exe C Program Files Common Files McAfee McSvcHost McSvHost exe C Windows system mfevtps exe C Program Files x PDF Complete pdfsvc exe C Windows SysWOW rundll exe C Windows system rundll exe C Program Files x Microsoft Application Virtualization Client sftvsa exe C Program Files Western Digital WD SmartWare WD Drive Manager WDDMService exe C Program Files x Western Digital WD SmartWare Front Parlor WDFME WDFME exe C Program Files x Western Digital WD SmartWare Front Parlor WDSC exe C Windows System svchost exe -k secsvcs C Program Files Common Files Microsoft Shared Windows Live WLIDSVC EXE C Program Files Common Files Microsoft Shared Windows Live WLIDSvcM exe C Program Files McAfee MSC McAPExe exe C Program Files Common Files McAfee AMCore mcshield exe C Program Files Common Files McAfee SystemCore mfefire exe C Program Files x Microsoft Application Virtualization Client sftlist exe C Program Files Common Files McAfee Platform McSvcHost McSvHost exe C Program Files x Common Files Microsoft Shared Virtualization Handler CVHSVC EXE C Windows system svchost exe -k NetworkServiceNetworkRestricted C Windows system svchost exe -k LocalServiceAndNoImpersonation C Windows System WUDFHost exe C Windows system atieclxx exe C Program Files NVIDIA Corporation Display nvxdsync exe C Windows system nvvsvc exe C Program Files x Hewlett-Packard TouchSmart Calendar Service GCalService exe C Program Files x Hewlett-Packard HP Support Framework hpsa service exe C Program Files x Common Files Intuit Update Service v IntuitUpdateService exe C Windows system SearchIndexer exe C PROGRA MICROS Office OUTLOOK EXE svchost exe C Windows system taskhost exe C Program Files x Malwarebytes' Anti-Malware mbamgui exe C Windows system Dwm exe C Windows Explorer EXE C Program Files x Hewlett-Packard HP Odometer hpsysdrv exe C Program Files IDT WDM beats exe C Program Files Microsoft IntelliPoint ipoint exe C Program Files Microsoft IntelliType Pro itype exe C Program Files x NVIDIA ... Read more

A:Background audio ads - failed windows updates code 80070216

Hello rradavich I would like to welcome you to the Malware Removal section of the forum.Around here they call me Gringo and I will be glad to help you with your malware problems.Very Important --> Please read this post completely, I have spent my time to put together somethings for you to keep in mind while I am helping you to make things go easier, faster and smoother for both of us!Please do not run any tools unless instructed to do so.We ask you to run different tools in a specific order to ensure the malware is completely removed from your machine, and running any additional tools may detect false positives, interfere with our tools, or cause unforeseen damage or system instability.Please do not attach logs or use code boxes, just copy and paste the text.Due to the high volume of logs we receive it helps to receive everything in the same format, and code boxes make the logs very difficult to read. Also, attachments require us to download and open the reports when it is easier to just read the reports in your post.Please read every post completely before doing anything.Pay special attention to the NOTE: lines, these entries identify an individual issue or important step in the cleanup process.Please provide feedback about your experience as we go.A short statement describing how the computer is working helps us understand where to go next, for example: I am still getting redirected, the computer is running normally, etc. Please do not describe the computer as "the same", this requires the extra step of looking back at your previous post.NOTE: At the top of your post, click on the "Follow This Topic" Button, make sure that the "Receive notification" box is checked and that it is set to "Instantly" - This will send you an e-mail as soon as I reply to your topic, allowing us to resolve the issue faster.NOTE: Backup any files that cannot be replaced. Removing malware can be unpredictable and this step can save a lot of heartaches if things don't go as planed. You can put them on a CD/DVD, external drive or a pen drive, anywhere except on the computer.NOTE: It is good practice to copy and paste the instructions into notepad and print them in case it is necessary for you to go offline during the cleanup process. To open notepad, navigate to Start Menu > All Programs > Accessories > Notepad. Please remember to copy the entire post so you do not miss any instructions..I would like you to run this program for me.Please download Farbar Recovery Scan Tool and save it to your desktop.Note: You need to run the version compatibale with your system. If you are not sure which version applies to your system download both of them and try to run them. Only one of them will run on your system, that will be the right version.Double-click to run it. When the tool opens click Yes to disclaimer.Press Scan button.It will make a log (FRST.txt) in the same directory the tool is run. Please copy and paste it to your reply.The first time the tool is run, it makes also another log (Addition.txt). Please attach it to your reply..I would also like to get some extra information on one of the files on the computerRun FRST like you did before and Type the following in the edit box after "Search:".rpcss.dllIt then should look like:Search: rpcss.dllClick Search button and post the log (Search.txt) it makes to your reply.Gringo

http://www.bleepingcomputer.com/forums/t/531326/background-audio-ads-failed-windows-updates-code-80070216/
Relevancy 66.65%

As title. Im using W7 64-bit version and its a cumulative security update for IE8.
Microsoft charges me to try and email my issues, so id thought id try here first.

what should i do to solve this problem? I have disabled my Kaspersky and no change. I have also downloaded it manually and it just says it cant be installed.

A:trying to use update KB980182 gives code 800736B3?!?!?!

Is Windows Defender on? See if disabling it in 'services' helps.

http://www.sevenforums.com/windows-updates-activation/76089-trying-use-update-kb980182-gives-code-800736b3.html
Relevancy 65.79%

Windows 7 Fail to Update: Code 800736B3 - Getting error on update CBS

A:Windows 7 Fail to Update: Code 800736B3

The SFC log seems incomplete, please run SFC /SCANNOW again
Windows Update Posting Instructions

Step 4 asks you to copy the CBS folder to your desktop and put it in a zip folder.
Upload the zip folder when you post again.

If the zip folder is too big for the forum, upload just the CBS.log from the CBS folder copy on your Desktop.
Please add your SF Systems Specs by following this tutorial: System Info - See Your System SpecsIn the System Manufacturer/Model Number field, manually type Desktop or Laptop adding it to the information already in the field.
Specify Custom Build as the manufacturer if it is not an OEM machine.
The tool does not fill in this information but it is very important if someone has to research drivers or hardware for your machine.
Log on to Sevenforums (SF) and let the tool fill in you System specs on your SF profile.

Full instructions are in the tutorial. It's a simple process and it makes that information readily available on your posts. You don't have to retype the information in any thread.

Click here to view your system specs on SevenForums.

Click on My System Specs in the lower left of any post by any member to see what is presented about their machine.

Thanks

http://www.sevenforums.com/windows-updates-activation/338201-windows-7-fail-update-code-800736b3.html
Relevancy 64.93%

Suddenly Windows 7 has stopped installing Windows Updates. It downloads, then creates restore point, starts installation, but then comes back with the error code 800F0900. This happens with all the updates when carried out individually, critical or optional. I first went through the process of clearing all the Start-up Programs in the Services section of msconfig. As that did not solve it I then stopped all but MS services, and that did not solve it.  I tried the Microsoft .NET Setup Verification Tool. This said there were problems that it could not fix and sent a report to Microsoft.  Following an earlier thread on this site, I installed and used the Windows Repair program from Tweeking.com. This failed to solve the problem. Does any one have any other possible advice to help solve this problem ?

A:Windows Updates will not install. Error code 800F0900 for all updates.

I would try running the System Update Readiness Tool:  http://www.microsoft.com/en-us/download/details.aspx?id=20858 .
 
Louis

http://www.bleepingcomputer.com/forums/t/597603/windows-updates-will-not-install-error-code-800f0900-for-all-updates/
Relevancy 64.93%

I am dealing with interesting but messy situation with almost new PC PC specs Lenovo ThinkCentre M p Windows Pro x While windows updates were working normally initially they are not working at all anymore - all OS updates are failing and do not install with error code B I have tried different voodoo for me tricks to no avail Manually downloaded individual update fails to install as well Another issue are huge CBS log approx MB before cab files are auto-done What I have done - run SFC scannow several times before and after running SURT result is always quot Windows Resource Protection found corrupt files but was unable to fix some of them quot - all, 800736B3 at 7 errors x64 working Updates and not Win 80246007 Pro run SURT - run quot Windows Update Diagnostic quot result is rather confusing - it keeps mentioning x not fixed but then show as fixed in details - I am attaching screenshots as well deleting renaming specific folders as was advised in several forums Win 7 Pro x64 Updates not working at all, errors 800736B3 and 80246007 restarting WU BITS services The issue remains same as before - Windows updates are still not installing Mostly they fail with B sometimes with same quot KB quot update Fresh CheckSUR log is clean but I am attaching CheckSUR persist with some issues for reference I am also attaching two partial CBS log files after deleting CBS log at some point If older CBSpersist are needed I can provide them but they are big MB - MB per file Can gurus please help Thank you in advance EDIT At moment there are critical updates that do not install

A:Win 7 Pro x64 Updates not working at all, errors 800736B3 and 80246007

Bump: any knowledgeable good soul around?

http://www.sevenforums.com/windows-updates-activation/364554-win-7-pro-x64-updates-not-working-all-errors-800736b3-80246007-a.html
Relevancy 63.21%

I've re-run the updates several times and gone through the System File Check process, run the MS suggested Fix-It, and run the System Update Readiness program, but still can't get these two updates to install. Attached is the CBS.zip.

A:Two security updates fail: KB293135 (800736B3) & KB2926765 (8007000D)

CheckSUR fixed a number of problems - but was also unable to fix a few.
Here's the failure list...

Code:
Unavailable repair files:
winsxs\manifests\amd64_microsoft-windows-shell32_31bf3856ad364e35_6.1.7601.18429_none_ca494925289f2f1e.manifest
winsxs\manifests\wow64_microsoft-windows-shell32_31bf3856ad364e35_6.1.7601.18429_none_d49df3775cfff119.manifest
winsxs\manifests\amd64_microsoft-windows-shell32_31bf3856ad364e35_6.1.7601.22639_none_cac817ea41c4e800.manifest
winsxs\manifests\wow64_microsoft-windows-shell32_31bf3856ad364e35_6.1.7601.22639_none_d51cc23c7625a9fb.manifest
servicing\packages\Package_2_for_KB2926765~31bf3856ad364e35~amd64~~6.1.1.1.mum
servicing\packages\Package_2_for_KB2926765~31bf3856ad364e35~amd64~~6.1.1.1.mum
servicing\packages\Package_for_KB2926765_SP1~31bf3856ad364e35~amd64~~6.1.1.1.mum
servicing\packages\Package_for_KB2926765_SP1~31bf3856ad364e35~amd64~~6.1.1.1.mum
servicing\packages\Package_for_KB2926765~31bf3856ad364e35~amd64~~6.1.1.1.mum
servicing\packages\Package_for_KB2926765~31bf3856ad364e35~amd64~~6.1.1.1.mum
servicing\packages\Package_2_for_KB2926765~31bf3856ad364e35~amd64~~6.1.1.1.cat
servicing\packages\Package_2_for_KB2926765~31bf3856ad364e35~amd64~~6.1.1.1.cat
servicing\packages\Package_for_KB2926765_SP1~31bf3856ad364e35~amd64~~6.1.1.1.cat
servicing\packages\Package_for_KB2926765_SP1~31bf3856ad364e35~amd64~~6.1.1.1.cat
servicing\packages\Package_for_KB2926765~31bf3856ad364e35~amd64~~6.1.1.1.cat
servicing\packages\Package_for_KB2926765~31bf3856ad364e35~amd64~~6.1.1.1.cat
I'll post a fix for them a little later - gotta eat soon!

http://www.sevenforums.com/windows-updates-activation/333171-two-security-updates-fail-kb293135-800736b3-kb2926765-8007000d.html
Relevancy 61.92%

Help, can't print anything and can't find out how to fix that error code

A:Printer Spooler has a error message <Failed to Read Description. Error Code: 193 >

Hi, go to start search and type:- cmd, right click on the returned cmd.exe and select "run as administrator" at the prompt (copy paste)


Code:
sc queryex spooler > 0 & notepad 0
(press enter) I am guessing we will see error 1058.

Next still at cmd type:-


Code:
net start > 1 & notepad 1
(press enter)

Please post both notepad entry's here.

http://www.techsupportforum.com/forums/f217/printer-spooler-has-a-error-message-failed-to-read-description-error-code-193-a-665533.html
Relevancy 61.92%

i have been having some troubles with my printer lately [Canon Pixma iP1800]
and i have been trying to enable "Printer Spooler" i went into services.msc and tried to fix the problem but came back with negative results Failed To Read Discription Error Code: 2) i later referred to Eric01's thread for further help for regedit (HKEY_LOCAL_MACHINE\SYSTEM\CURRENTCONTROLSET\CONTROL\PRINT\
i have found all original files mentioned in that thread with no extra files.
I have also tried to find any files within C:\Windows\System32\spool\PRINTERS and to delete anything in there.

So far i have had no luck and a report due soon.Please Help!!!!

System Specs : Windows 7 Ultimate 32x/4GB Ram/

BTW READ: in services.msc it does not read Printer Spooler but just Spooler
 

Relevancy 61.49%

Tech Support Guy System Info Utility version OS Version Microsoft Windows XP Home code error failed Edition Service Pack bit Processor Intel R Pentium R CPU GHz x Family Model Stepping Processor Count RAM Mb Graphics Card Intel R G Graphics Controller Mb Hard Drives C Total - MB Free - MB Motherboard Dell Computer Corp K Antivirus Microsoft Security Essentials Updated Yes On-Demand Scanner Enabled I ran pc check test and while doing so I notice most hard drive test passed except TARGETED READ TEST Error reading sector Test found sector error Failed Error code WHD -S K SMART SHORT SELF TEST The device reported the following status The previous self-test completed the read element of the test failed The first failing LBA value is and the failure occurred after the device had been operating for power-on failed error code hours Failed Error code WHD -XU this statement the failure occurred after the device had been operating for power-on hours not sure what this is insinuating failed error code I m pretty sure this never happen I never leave my computer on for that long of hours I ve been trying to upgrade from windows XP to windows Now it seems that i have to buy a hard drive for my Dell computer which according failed error code to Dell is I just want to know if there is any other way to fix this hard drive without having to come up with this I know that this computer has alot more to give It runs great and I haven t had any problems Until now that I have to upgrade and will no longer be getting updates for XP is this a scam of sorts or is my computer really at risk Help please thanks for reading this Sandy nbsp

Relevancy 60.63%

i just installed google chrome from online installer and then i moved the file using application mover to the HDD.. then i pasted a symlink in "C:\Program Files (x86)\" ... "C:\" is the SSD where the windows and the drivers are installed.... when i turn on chrome everything works file.. but the updater doesn't work... when i try to update i get this:



can anyone help me get that fixed.. thanks!

A:Update failed (error: 3)An error occurred while checking for updates:

Just uninstall Chrome then install it directly to the destination you want it installed instead of moving it post installation.

http://www.sevenforums.com/general-discussion/346220-update-failed-error-3-error-occurred-while-checking-updates.html
Relevancy 60.63%

Hi There I'm getting the errors below and but I have not got any BSOD The errors I'm getting in nbsp eventviewer are Pku ulog failed to start xC-- Negolog failed to start IDListenLog failed to start P PLog failed to start and HomegroupLog failed to start all with the same failure code xC-- This is what the logs files says about each error Pku ulog Unknown GUID c a fb- a -d - -dc e a No Format Information found p plog Unknown GUID fc d ca -e c - c-be -e e a bbf No Format Information found negolog Unknown GUID f- f start, failed to Negolog and all P2PLog to Errors failed start, 0xC-- Pku2ulog HomegroupLog 0xC--35, failure to 35. start, to with failed start code IDListenLog the failed same start to failed a- -ddb - ab ad d No Format Information found idlistenlog Unknown GUID a f-b - - aa- ef No Format Information found homegrouplog Errors Pku2ulog failed to start 0xC--35, Negolog failed to start, IDListenLog failed to start, P2PLog failed to start and HomegroupLog failed to start, all with the same failure code 0xC-- 35. Unknown GUID f a a- - ede-ff b-dd dafeed No Format Information found However the 'Unknown xx ' number changes times to times Could you help me please Thank you very much for your attention Best Regards

A:Errors Pku2ulog failed to start 0xC--35, Negolog failed to start, IDListenLog failed to start, P2PLog failed to start and HomegroupLog failed to start, all with the same failure code 0xC-- 35.

Hi,
If you have Home group set up, please go to Control Panel ? Network and Sharing Center. Choose homegroup and sharing options and click ?Leave the homegroup?.Juke Chou
TechNet Community Support

https://social.technet.microsoft.com/Forums/en-US/15c580c0-cbfd-48aa-b058-2de145336920/errors-pku2ulog-failed-to-start-0xc35-negolog-failed-to-start-idlistenlog-failed-to-start?forum=w8itprogeneral
Relevancy 60.2%

Ok so i've gone through this so many times now and search Google over and over again, did things that other people have tried and none have had any success.
I have 7 important and 5 optional and none of the important ever complete.
As the title says errors are code 57a and code 643
so if anyone could explain in step by step what i can do to fix this and complete the install i would be much appreciated.
I've tried so many things i can't really remember what exactly i've done so i'l just try whatever goes up and then see if it works.

A:Failed updates error 57a and 643

Welcome
Perhaps this MS article will help
When you try to install an update for the .NET Framework 1.0, 1.1, 2.0, 3.0, or 3.5, you may receive Windows Update error code &#34;0x643&#34; or Windows Installer error code &#34;1603&#34;

http://www.vistax64.com/windows-updates/290052-failed-updates-error-57a-643-a.html
Relevancy 60.2%

Hi I have been having some recurring problems with the attempts to install some automatic windows updates Security Update for Microsoft Office Acess Security Update for Microsoft Office Outlook Junk Email Filter I am not able to install these updates maybe any other updates in general After attempting the install the following install window says quot Windows Update encountered an unknown Code 80070643, Windows error, Update 7 install Error can't updates. error quot Next to it an error code Microsoft Error Code 80070643, Windows 7 Update error, can't install updates. provides a solution to the problem by re-installing Microsoft NET Framework They also provide a link to the program NET Framework cleanup Error Code 80070643, Windows 7 Update error, can't install updates. tool that enables you to uninstall NET Framework and it s components I followed Microsoft s instructions to solve Error Code 80070643, Windows 7 Update error, can't install updates. the issue though I ve been put at a standstill I have used the NET Framework Cleanup tool to uninstall NET Framework and it s components states that it uninstalls all versions SP Then afterwards instructed to reinstall NET Framework specifically in an order then then SP I start with then as the installation starts it says that to contiunue installation I must turn off or on windows features in the Control Panel I do so and turn off all Windows features Then continue and it again states to turn off features in the Control Panel I wasn t able to continue the process and I am also concerned that this is the same error that made me unable to install Microsoft Security Essentials as this is the same error and I am sure that something is wrong with my version of NET Framework Please help me resolve this issue it s been pissing me off nbsp

A:Error Code 80070643, Windows 7 Update error, can't install updates.

Hello?
Waiting for a day no one seems to be replying.
 

https://forums.techguy.org/threads/error-code-80070643-windows-7-update-error-cant-install-updates.939844/
Relevancy 60.2%

I am getting the same failed back up error message, but for a different cause.

A:Backup Failed error code 0x81000019

See if this helps you (this should also work with Vista) windows 7 backup error "shadow copy could not be created"

http://www.vistax64.com/general-discussion/280309-backup-failed-error-code-0x81000019.html
Relevancy 60.2%

Any idea why it won't install on my brand new machine with tons of memory & hard drive?
 

https://forums.techguy.org/threads/win10-failed-error-code-80070057.1156425/
Relevancy 60.2%

Trying to restore Emachine E28 laptop.
After last install disk runs I receive the following message:
Restore failed. Error code = 045 (WIM ApplyImage cannot apply image. the request could not be performed because of an I/O device error.)
Have tried almost everything I can think of but no results.
Would someone be able to help?

A:Restore failed Error code = 0x45

Please clarify what you mean by "restore", system restore? Repair? Restore to factory condition using the built in recovery console? Using restore disks? Did you create/purchase/download & burn the restore disc set?

What symptoms/behavior/ problems...etc led you attempting to restore? Any recent hardware/software/changes/problems that may or may not contribute to these problems? Potential helpers need more to go on.

Just my .02

http://www.bleepingcomputer.com/forums/t/439386/restore-failed-error-code-0x45/
Relevancy 60.2%

I'm getting this error but I can still print locally and from the network I have googled this Failed Operation Code Spooler 315, Error forum and have not found a solution Seems like a lot of people have this error if there a fix yet Log Name Microsoft-Windows-PrintService Admin Source Microsoft-Windows-PrintService Date AM Event ID Task Category Sharing a printer Level Error Keywords Classic Spooler Event Error Code 315, Spooler Operation Failed Printer User SYSTEM Computer Biostari -PC Description The print spooler failed to share printer hp deskjet c with shared resource name hp deskjet c Error The printer cannot be used by others on the network Event Xml lt Event xmlns quot http schemas microsoft com win events event quot gt lt System gt lt Provider Name Error Code 315, Spooler Operation Failed quot Microsoft-Windows-PrintService quot Guid quot EF FD-E - D -B - C F A quot gt lt EventID gt lt EventID Error Code 315, Spooler Operation Failed gt lt Version gt lt Version gt lt Level gt lt Level gt lt Task gt lt Task gt lt Opcode gt lt Opcode gt lt Keywords gt x lt Keywords gt lt TimeCreated SystemTime quot - - T Z quot gt lt EventRecordID gt lt EventRecordID gt lt Correlation gt lt Execution ProcessID quot quot ThreadID quot quot gt lt Channel gt Microsoft-Windows-PrintService Admin lt Channel gt lt Computer gt Biostari -PC lt Computer gt lt Security UserID quot S- - - quot gt lt System gt lt UserData gt lt ShareFailed xmlns auto-ns quot http schemas microsoft com win events quot xmlns quot http manifests microsoft com win windows printing spooler core events quot gt lt Param gt lt Param gt lt Param gt hp deskjet c lt Param gt lt Param gt hp deskjet c lt Param gt lt ShareFailed gt lt UserData gt lt Event gt

A:Error Code 315, Spooler Operation Failed

This Tech net article should be of help:

Event 315 with error 2114 on startup - Microsoft Reduce Customer Effort Center - Site Home - TechNet Blogs

http://www.sevenforums.com/bsod-help-support/277060-error-code-315-spooler-operation-failed.html
Relevancy 60.2%

I got error code 9c48 when trying to install the important update for IE9. Not only has the update failed, but it has caused IE9 to be inoperable, resulting in NO browser. I can't seem to find any solution. Please help.

A:IE9 Update Failed - Error code 9c48

Try a system integrity scan
RUN > CMD > SFC /SCANNOW

Also try using firefox to access the net,then uninstall IE & download to install IE9 again.

You can try rolling back to your previous ver as well.

http://www.sevenforums.com/windows-updates-activation/165023-ie9-update-failed-error-code-9c48.html
Relevancy 60.2%

Hello I recently received a message on my laptop saying my Hard Drive was failing so I proceeded to buy a brand new external hard drive to back up all my files When I am backing it up it gets all the way to and then it ends saying it wasn't successful with the Error code x D The error message says 'The operation failed due to a device error encountered with either the source or the destination If the source or destination volume is on a disk run CHKDSK R on the source or destination volume and then retry the operation Details The request could not be performed because of an I O device error I have looked up solutions online and done CHKDSK Back failed, 0x8078012D code: error up R for both C and G where the external hard drive is connected to multiple times I have also turned off my security software while performing the back up and I have also set Volume Shadow Copy and Windows Backup Service to manual in the Services Window I also run on Windows I really need this back up to work because I don't want to lose all my files I would really appreciate any help at all Cheers

http://www.tenforums.com/performance-maintenance/63188-back-up-failed-error-code-0x8078012d.html
Relevancy 60.2%

WOW has this problem been driving me buggers all day I ve been attempting to download various software programs including quot Registry Mechanic quot yes ironic isn t it and keep getting the following error message C Program Files Registry Mechanic Activate dll An error occurred while trying to rename a file in the destination directory Movefile Failed Code The process cannot access the file because it is being used by another process Click to retry again Ignore not recommended or Abort to cancel installation Phooey what a headache Lots of Goole searching and what few hits I turn up seem to be virtually useless Most hits seem to indicate a problem with Bitdefender I do not have Bitdefenderalthough I did use their on-line scanning process just last week Drove me crazy looking for a clue in program files etc Finally went to Internet Options where it gave me the option to quot delete the Bitdefender on-line scanner quot which accomplished absolutely nothing whatsoever Oh woe is me - Anyway a couple of those 32 Error message--> failed Movefile Code google hits also suggested that Bitdefender would possibly cause --- gt bdss exe that could be the culprit Embarassed to concede I wasn t sure how to proceed Error message--> Movefile failed Code 32 at that point to even delete or somehow negate the quot bdss exe quot problem IF that even has anything to do with it I m running on Windows XP And I did manage to download CCleaner and give that route a shot to no avail Does anybody have some thoughts had prev probs with this If so please feel free to walk me through this like a -year-old Much obliged

A:Error message--> Movefile failed Code 32

This error is related to installed antivirus, antispyware, or behavior Guard type software on a machine. I was able to get rid of the message and complete installation on a friend's machine by "suspending" PC Tools' "Threatfire." Norton is another one that will do the same thing, however, on selective machines.

After done installing, you may re-enable the program and the installed application will work fine.

None of the other solutions that were suggested by other forums worked for me either. Remember, cleaning up registry will, most probably cause more harm then good. Good luck.

http://www.bleepingcomputer.com/forums/t/185694/error-message-movefile-failed-code-32/
Relevancy 60.2%

This one has me boggled. I've searched high low looking for a solution to this issue without any success thus far. As the title of the thread say, I've been unable to install SP1.

Link to my CBS directory (zipped): https://skydrive.live.com/redir?resi...6E21F538FA!107

SFC /SCANNOW reported no errors.

Let me know if you need anything else and thanks for the help.

The error message says, "Windows Update encountered an unknown error"

A:Win 7 x64 SP1 Update Failed, Error Code 80070002

There's no sign in your CBS.log file that SFC actually ran.
an 0x80070002 error is actually a 'File not found' error, and often means that a registry entry is pointed in the wrong direction, rather than that a file is missing.

Is your machine showing any other signs of problems?

http://www.sevenforums.com/windows-updates-activation/269020-win-7-x64-sp1-update-failed-error-code-80070002-a.html
Relevancy 60.2%

Hi guys,
I am trying to get my microhpone to work, and it doesnt anymore, it's definately not the mic as i have tested it on another comp, but it won't work on this one.

I'm running a Soundblaster Live! 24-bit sound card on windows XP SP2 , and the Creative Game Port has a Yellow- (!) next to it with an error code 10.

Anyone know how to fix it? Or why it does this....

I tried re-installing drivers, changing the sound card to a different PCI slot, and disable the on-board audio, on my Asus A7V600.

Thanks
 

A:Error Code 10, Device failed to start...

Here is what I found on the code, but from what I have read, it doesn't sound as if it will help any:

Code 10

If the device has a "FailReasonString" value in its hardware key, that string is displayed as the error message. The driver or enumerator places this registry string value there. If there is no "FailReasonString" in the hardware key, the following generic error message is displayed:
This device is either not present, not working properly, or does not have all the drivers installed. (Code 10)

Try upgrading the device drivers for this device.
Solution button: Update Driver

To resolve this error code, make sure the device is connected to the computer correctly. For example, make sure all cables are plugged in fully and that all adapter cards are properly seated. Follow the suggested solution button and update the device driver. It may be possible to remove the device and redetect it using the Add New Hardware wizard.
Click to expand...
 

https://forums.techguy.org/threads/error-code-10-device-failed-to-start.491791/
Relevancy 60.2%

I was going to post this in the software section but I assumed since it pertains to the network portion of the application and that I can connect through a VPN that the problem is LAN Network oriented Hello I recently installed the software Raidcall RaidCall- FREE Group Communication Software- IM Group Communication and Voice Chat Error 23 Raidcall Code Connection - Failed: which is a program designed to be a cross between Skype and Ventrilo I avidly registered and the process went smoothly That was all until I came up to login screen where after entering my information I got Connection Failed: Error Code 23 - Raidcall the following error Connection Failed please try again later Error code Does this have something to do with Cyclic Redundancy Checking That's the only information I could come up with I've done as much research as I can think of sent them an email with lots of information no response as to the answer yet and also asked on their forums but no dice Background information I can provide more if needed - On a University Campus Technical Information IT Indiana Wesleyan University -I quot m connected directly through to their wall I quot ve also tried swapping out my own cables to no avail - Have done an Error Checking Check for both drives for CYC relation - which I think it may be the culprit I quot m not tech savy though hence my forum post - I CAN connect to it through a VPN Hotshield - obviously I don't want to have this be my way of connecting through it because I want to use Raidcall while playing World of Warcraft and it gives me horrible latency - I've called my IT support here at school and they didn't think it would be something on their end Although the guy on the other end did not sound intelligible at all Thanks for all your help I really appreciate it

A:Connection Failed: Error Code 23 - Raidcall

Also haveing same issue. Friends dont have a problem but I can not connect. I just googled the error code and this was at the top.

http://www.sevenforums.com/network-sharing/263071-connection-failed-error-code-23-raidcall.html
Relevancy 59.77%

The failed updates are 3004375, 3031432, 3033929, 3035131, and 3046049.

The .cab files all had to be removed from CBS.zip to come under the upload size limit. I can send them separately if needed.

I'd be grateful for any help. Thanks!

A:Error 80070490 With 5 Failed Updates

Can you please follow this guide and report back.
Windows Genuine and Activation Issue Posting Instructions

http://www.sevenforums.com/windows-updates-activation/364047-error-80070490-5-failed-updates.html
Relevancy 59.77%

Followed the windows update instructions as follows:



https://www.dropbox.com/s/bhlnwl01m6s5hgq/CBS.zip?dl=0

A:22 Failed Updates, 3 Error Codes

Here's the Summary from the CheckSUR.log

Code:
Summary:
Seconds executed: 2157
Found 71 errors
CSI Manifest All Zeros Total count: 41
CBS MUM Corrupt Total count: 15
CBS Catalog Corrupt Total count: 15
Unavailable repair files:
winsxs\manifests\msil_system.xml.resources_b77a5c561934e089_6.1.7601.18529_en-us_4ba39f6adcb8ffa6.manifest
winsxs\manifests\x86_netfx-mscordacwks_b03f5f7f11d50a3a_6.1.7601.22740_none_e8b38a23dd2b7e4f.manifest
winsxs\manifests\amd64_mscorlib_b77a5c561934e089_6.1.7601.18529_none_54663ac069823895.manifest
winsxs\manifests\amd64_netfx-system.xml_b03f5f7f11d50a3a_6.1.7601.18529_none_61525d543c29f632.manifest
winsxs\manifests\x86_microsoft-windows-security-credssp_31bf3856ad364e35_6.1.7601.22943_none_c627b70219090938.manifest
winsxs\manifests\x86_netfx-mscordacwks_b03f5f7f11d50a3a_6.1.7601.18529_none_ff7e636bc386d1f3.manifest
winsxs\manifests\msil_mscorlib.resources_b77a5c561934e089_6.1.7601.18529_en-us_6685ac8c75cac403.manifest
winsxs\manifests\msil_system.data.sqlxml_b77a5c561934e089_6.1.7601.18529_none_05d526a261a2bd9d.manifest
winsxs\manifests\x86_microsoft-windows-msauditevtlog_31bf3856ad364e35_6.1.7601.22943_none_c9b1ffe0efe67923.manifest
winsxs\manifests\amd64_netfx-sos_dll_b03f5f7f11d50a3a_6.1.7601.22740_none_89d49b0dbca4315e.manifest
winsxs\manifests\msil_system.xml_b77a5c561934e089_6.1.7601.22740_none_3f3239201f9a7e81.manifest
winsxs\manifests\amd64_netfx-sos_dll_b03f5f7f11d50a3a_6.1.7601.18529_none_a09f7455a2ff8502.manifest
winsxs\manifests\amd64_netfx-system.data.sqlxml_b03f5f7f11d50a3a_6.1.7601.22740_none_fd50d2123d55f0a6.manifest
winsxs\manifests\amd64_netfx-system.data.sqlxml_b03f5f7f11d50a3a_6.1.7601.18529_none_141bab5a23b1444a.manifest
winsxs\manifests\x86_netfx-sos_dll_b03f5f7f11d50a3a_6.1.7601.22740_none_d181d1e4d1205a64.manifest
winsxs\manifests\x86_mscorlib_b77a5c561934e089_6.1.7601.18529_none_9c1371977dfe619b.manifest
winsxs\manifests\x86_netfx-mscorwks_dll_b03f5f7f11d50a3a_6.1.7601.22740_none_efef673d052a727c.manifest
winsxs\manifests\x86_microsoft-windows-ncrypt-dll_31bf3856ad364e35_6.1.7601.18738_none_5fd40dd14fead8db.manifest
winsxs\manifests\x86_microsoft-windows-security-credssp_31bf3856ad364e35_6.1.7601.18738_none_c5ade9aeffdecf09.manifest
winsxs\manifests\amd64_netfx-system.xml_b03f5f7f11d50a3a_6.1.7601.22740_none_4a87840c55cea28e.manifest
winsxs\manifests\x86_microsoft-windows-os-kernel_31bf3856ad364e35_6.1.7601.18738_none_6e2619e01271dca0.manifest
winsxs\manifests\x86_mscorlib_b77a5c561934e089_6.1.7601.22740_none_8548984f97a30df7.manifest
winsxs\manifests\msil_system.data.sqlxml.resources_b77a5c561934e089_6.1.7601.22740_en-us_f0063b6d4da03da4.manifest
winsxs\manifests\amd64_microsoft-windows-b..environment-windows_31bf3856ad364e35_6.1.7601.22943_none_c7c6b840bca113b6.manifest
winsxs\manifests\x86_netfx-sos_dll_b03f5f7f11d50a3a_6.1.7601.18529_none_e84cab2cb77bae08.manifest
winsxs\manifests\x86_microsoft-windows-ncrypt-dll_31bf3856ad364e35_6.1.7601.22943_none_604ddb246915130a.manifest
winsxs\manifests\msil_mscorlib.resources_b77a5c561934e089_6.1.7601.22740_en-us_4fbad3448f6f705f.manifest
winsxs\manifests\msil_system.data.sqlxml_b77a5c561934e089_6.1.7601.22740_none_ef0a4d5a7b4769f9.manifest
winsxs\manifests\amd64_netfx-mscordacwks_b03f5f7f11d50a3a_6.1.7601.18529_none_b7d12c94af0aa8ed.manifest
winsxs\manifests\msil_system.xml.resources_b77a5c561934e089_6.1.7601.22740_en-us_34d8c622f65dac02.manifest
winsxs\manifests\msil_system.data.sqlxml.resources_b77a5c561934e089_6.1.7601.18529_en-us_06d114b533fb9148.manifest
winsxs\manifests\amd64_mscorlib_b77a5c561934e089_6.1.7601.22740_none_3d9b61788326e4f1.manifest
winsxs\manifests\x86_microsoft-windows-os-kernel_31bf3856ad364e35_6.1.7601.22943_none_6e9fe7332b9c16cf.manifest
winsxs\manifests\amd64_microsoft-windows-appid_31bf3856ad364e35_6.1.7601.22943_none_b5da3161e1fdc1a3.manifest
winsxs\manifests\amd64_microsoft-windows-b..os-loader.resources_31bf3856ad364e35_6.1.7601.22943_en-us_d526db1c13da4... Read more

http://www.sevenforums.com/windows-updates-activation/371544-22-failed-updates-3-error-codes.html
Relevancy 59.77%

Dell Dual Core Vista workstation valid activated Vista SP Norton v Office SBE Directedly connected to DSL router with internet access e-mails and internet fully operational System had AT amp T firewall software installed on it in addition to Norton uninstalled all AT amp T software Windows update fails Cannot connect to windows update server repeated error code Researched error uninstalled Error 80070643, Updates failed... Norton ran Norton removal tool tried update access Error 80070643, Updates failed... failed Found issues online with Office OSE uninstalled Office ran Office removal Error 80070643, Updates failed... tool afterwards removing all registry entires tried updates failed Found remedies inclusive of stopping services and renameing catroot and software distribution folder restarting services after reregistering dlls tried update failed Downloaded and installed standalone version of Windows update connection manager installation failed with error code Put me in a round room and tell me to tinkle in the corner I need help I've thrown everything Error 80070643, Updates failed... I could at this and I'm out of ideas Hope someone out there can help I look forward to a reply Thanks

A:Error 80070643, Updates failed...

Hi -

Do you have either Zone Alarm or Spybot installed?

For further reading and help take a look at these links:
[1] http://windowshelp.microsoft.com/Win...7e1701033.mspx
[2] http://support.microsoft.com/kb/903772

Have you tried updating without Office installed?

http://www.techsupportforum.com/forums/f217/error-80070643-updates-failed-373363.html
Relevancy 59.34%

I recently did a factory restore to get rid of some malware and now for some reason updates aren't going through properly.
Everytime i shut down my computer i have 85 updates and they all fail except two.
But the error code is Code 80071A2D

Almost all the updates are Security updates.

A:Windows Failed update Error code 80071A2D

Please follow the Windows Update Posting Instructions and post the requested data
If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CBA files, for a number of reasons)

http://www.sevenforums.com/windows-updates-activation/332754-windows-failed-update-error-code-80071a2d.html
Relevancy 59.34%

OS is Vista Home Premium. Windows Update fails when trying to install KB980248. I can download the Update KB980248 manually, but the installation fails. The error code is 80070020.

A:Update KB980248 failed error code 80070020

Happy Holidays

The error indicates that the process is being used by another program
Perform a clean boot to determine the source of the other use.
http://support.microsoft.com/kb/929135

The above procedure should solve your problem. If it does not and you are certain that you follwed the procedure correctly, try these methods. Ask about method 1, above if you have questions, it should work

How do I reset Windows Update components?
Description of the System Update Readiness Tool for Windows Vista, for Windows Server 2008, for Windows 7, and for Windows Server 2008 R2
Cannot Update Windows using Windows Update

If it were my computer I would turn off the firewall and anti virus to start. I feel that one of these two are the problem

http://www.vistax64.com/windows-updates/286253-update-kb980248-failed-error-code-80070020-a.html
Relevancy 59.34%

help i am trying to update my vista 32 bit and when the program is searching for a update, i get the error code and it says " windows update encountered an unknown error." code 80070424 please help me solve my problem

A:Help! update search failed error code 80070424

Please read thoroughly this one:Windows Update Error 80070424

If described steps are too hard to follow then please prepare log from VistaSysInfoTool (select all) VistaForums SysInfo Tool

Log attache to post

http://www.vistax64.com/windows-updates/261987-help-update-search-failed-error-code-80070424-a.html
Relevancy 59.34%

I've haven't been able to install this update 'Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2943357)'
It keeps coming up with an error code 80073712.

I am also getting an error 8004100E when trying to upgrade to Windows 10

Using the SUR tool I got the following log:

A:Security Update Failed Error code 80073712

You have rather a lot of errors there!

Code:
Summary:
Seconds executed: 124
Found 96 errors
CSI Manifest All Zeros Total count: 72
CBS MUM Corrupt Total count: 14
CBS Catalog Corrupt Total count: 10

Unavailable repair files:
winsxs\manifests\amd64_microsoft.transactions.bridge.dtc_b03f5f7f11d50a3a_6.1.7601.22733_none_65085bdd54b4a629.manifest
winsxs\manifests\amd64_wcf-m_sm_ins_rc_dll_31bf3856ad364e35_6.1.7601.22733_none_2795328d79930284.manifest
winsxs\manifests\amd64_wcf-system.runtime.serialization.ref_b03f5f7f11d50a3a_6.1.7601.22733_none_424d323c8e896dad.manifest
winsxs\manifests\amd64_wcf-icardres_dll_vista_31bf3856ad364e35_6.1.7601.18523_none_6f276a738180cba8.manifest
winsxs\manifests\amd64_wcf-system.servicemodel.ref_b03f5f7f11d50a3a_6.1.7601.22733_none_5ebf2b63339ef82d.manifest
winsxs\manifests\amd64_wcf-smdiagnostics_b03f5f7f11d50a3a_6.1.7601.18523_none_f5ee0756c06c09cd.manifest
winsxs\manifests\msil_system.runtime.serialization.resources_b77a5c561934e089_6.1.7601.22733_en-us_787b5545d9776103.manifest
winsxs\manifests\msil_smdiagnostics.resources_b77a5c561934e089_6.1.7601.18523_en-us_496526973f1e68f2.manifest
winsxs\manifests\amd64_wcf-m_sm_ins_rc_dll_31bf3856ad364e35_6.1.7601.18523_none_271663c8606d49a2.manifest
winsxs\manifests\amd64_microsoft-windows-wcfcorecomp.resources_31bf3856ad364e35_6.1.7601.22733_en-us_ff634b2369479517.manifest
winsxs\manifests\amd64_wcf-infocard_api_dll_31bf3856ad364e35_6.1.7601.18523_none_02011939c648dcfe.manifest
winsxs\manifests\amd64_wcf-system.servicemodel.washosting_b03f5f7f11d50a3a_6.1.7601.18523_none_0242455f46f9765d.manifest
winsxs\manifests\amd64_wcf-icardagt_exe_31bf3856ad364e35_6.1.7601.22733_none_907097fea175fea2.manifest
winsxs\manifests\amd64_wcf-system.runtime.serialization_b03f5f7f11d50a3a_6.1.7601.22733_none_7d243f06e2816846.manifest
winsxs\manifests\amd64_wcf-m_sm_cfg_ins_exe_31bf3856ad364e35_6.1.7601.22733_none_5eba49464cf449c9.manifest
winsxs\manifests\msil_system.runtime.serialization_b77a5c561934e089_6.1.7601.22733_none_bff6ca10b626f70a.manifest
winsxs\manifests\msil_system.identitymodel_b77a5c561934e089_6.1.7601.18523_none_f1b7e3b500b0dd75.manifest
winsxs\manifests\amd64_wcf-system.servicemodel_b03f5f7f11d50a3a_6.1.7601.18523_none_a1a8f58c939aac4a.manifest
winsxs\manifests\amd64_infocard.resources_b77a5c561934e089_6.1.7601.18523_en-us_1c3528fb3f63ae97.manifest
winsxs\manifests\amd64_microsoft-windows-wpfcorecomp.resources_31bf3856ad364e35_6.1.7601.18523_en-us_102e1681a6f8daa0.manifest
winsxs\manifests\msil_system.servicemodel.washosting_b77a5c561934e089_6.1.7601.22733_none_7b9fe117b7a77077.manifest
winsxs\manifests\msil_smsvchost.resources_b03f5f7f11d50a3a_6.1.7601.22733_en-us_b2b27b25e379631c.manifest
winsxs\manifests\msil_system.servicemodel_b77a5c561934e089_6.1.7601.22733_none_627b1e3960ee4846.manifest
winsxs\manifests\msil_smsvchost.resources_b03f5f7f11d50a3a_6.1.7601.18523_en-us_c97f21bfc9d2e96e.manifest
winsxs\manifests\amd64_microsoft.transactions.bridge.dtc_b03f5f7f11d50a3a_6.1.7601.18523_none_7bd502773b0e2c7b.manifest
winsxs\manifests\amd64_wcf-m_sm_mof_31bf3856ad364e35_6.1.7601.22733_none_230aba46aff3690d.manifest
winsxs\manifests\msil_system.servicemodel.resources_b77a5c561934e089_6.1.7601.22733_en-us_0f4b4b63d0545797.manifest
winsxs\manifests\amd64_wcf-infocard_api_dll_31bf3856ad364e35_6.1.7601.22733_none_027fe7fedf6e95e0.manifest
winsxs\manifests\amd64_wcf-smsvchost_b03f5f7f11d50a3a_6.1.7601.22733_none_b0fabad924c43863.manifest
winsxs\manifests\msil_microsoft.transacti..ridge.dtc.resources_b03f5f7f11d50a3a_6.1.7601.22733_en-us_ee690b9c8991e0b1.manifest
winsxs\manifests\amd64_infocard.resources_b77a5c561934e089_6.1.7601.22733_en-us_05688261590a2845.manifest
winsxs\manifests\msil_system.identitymodel.resources_b77a5c561934e089_6.1.7601.18523_en-us_d834c775e8e8bf5a.manifest
winsxs\manifests\amd64_wcf-icardagt_exe_31bf3856ad364e35_6.1.7601.18523_none_8ff1c939885045c0.manifest
winsxs\manifests\msil_system.service... Read more

http://www.sevenforums.com/windows-updates-activation/377490-security-update-failed-error-code-80073712-a.html
Relevancy 59.34%

Hi ,

I'm trying to enable Hyper-V Management tools and Platform so the User can use Hyper-V manager but it failed with message " Windows couldn't complete the requested changes. Please reboot and try again. Error code 0x800F0831".

I've rebooted the pc and checked the BIOS and yes the Virtualization Technology (VTX) is enabled. FYI this is a HP Compaq Elite 8300 pc with 32GB RAM. I checked the logs , but I don't see anything related to HyperV errors there. And the user hasn't complained of any other pc issues. Can someone please help ? Many thanks in advanced.

A:Hyper-V enabling failed with error code 0x800F0831

ps. Its a Windows 10 Pro and I already ran some updates but still no luck.

http://www.tenforums.com/virtualization/64223-hyper-v-enabling-failed-error-code-0x800f0831.html
Relevancy 59.34%

Hello. My computer will not start,come on again.Please help me. Now, it's to the point of giving me a blue  screen.     Doing a start while tapping F9 performs some tests with the results of:CPU Test  ---  PassedHard Drive Connection Test  ---  PassedBoot Test  --- Failed     Error Code BIOHD4Warning:  Boot Sector Corrupted/Not FoundMemory Test  ---  Passed  I dont have the recovery disk,so what can I do to get my PC running again?I have lots of picture and more I need to find again. Best regards Ronald Skaarland

http://h30434.www3.hp.com/t5/Desktop-Boot-and-Lockup/Boot-Test-Failed-Error-Code-BIOHD4/td-p/5658447
Relevancy 59.34%

I've been getting the 9C59 error for a while with the Windows automatic updater. I've attempted a manual update of IE 10, but had the same error. Not sure where to go from here.

I've attached the CBS file.

Thanks.

Dennis

A:IE 10 Update Failed - Windows 7 - Error Code 9C59

CheckSUR found and fixed a large number of errors - but there are still a couple of errors remaining, which it may be able to fix if you run the tool a second time. Please post (just) the new CheckSUR.log file afterwards.

There are a couple of errors in the CBS.log which may relate to the errors outstanding in the CheckSUR - so we need to get those fixed first, and only then see if it's affected the SFC/CBS results.

http://www.sevenforums.com/windows-updates-activation/296411-ie-10-update-failed-windows-7-error-code-9c59.html
Relevancy 59.34%

I have received a Hard Drive- WDC WD10JPVT-75A1YT0

Failed: WHD20-Z1J

What does this stress test failure mean?

A:Hard Drive Error Code Failed: WHD20-Z1J

It could be a false alarm - or mean your hard drive is faulty.  Run the 32-bit Dell diagnostics (outside of Windows;  press F12 a few times at powerup to get in) on the drive.
Are there any errors starting with 2000- that result?

If you need further assistance, you'll need to provide the system model information (i.e., Inspiron N5110, etc.).

http://en.community.dell.com/support-forums/laptop/f/3518/t/19986573
Relevancy 59.34%

Hi,

when i am registering dll in vista 64 bit as administrator user(from the cmd prompt) i am getting the following error

call to DllRegisterServer failed with error code 0x80020009.
when i re-compiled my project in vista using vs 2008 i am getting the following error

?error PRJ0019: A tool returned an error code from "Performing registration"?. When I comment the following code

STDAPI DllRegisterServer(void)
{
AFX_MANAGE_STATE(AfxGetStaticModuleState());
// registers object, typelib and all interfaces in typelib
return _Module.RegisterServer(TRUE); //this is what I commented
return TRUE//this i added

}
what should i do now?

Also i wanted to add a key under HKEY_CLASSES_ROOT\*\shellex\ContextMenuHandlers. is it possble to do it? Please let me know

Thanks in advance,

http://www.vistax64.com/general-discussion/205930-call-dllregisterserver-failed-error-code-0x80020009.html
Relevancy 59.34%

hi ..., i need help regarding the windows update issue.
i'm using windows vista business sp2 running on lenovo thinkpad sl300.
i want to upgrade my harddrive since i need a bigger capacity. so, i try to move my data on old harddrive to a new one.
i'm already try to migrate my harddrive several ways:
1. i try to clone my harddrive with sector by sector copy
2. i try to use rescue and recovery (utilities from thinkvantage)
3. i try to use backup and restore center (windows complete pc backup)
all of them give me the result, everything works just fine, except i no longer can run windows update and all related to it, for example microsoft security essentials.
i already try to fix the windows update with microsoft fix it
http://support.microsoft.com/kb/971058/en-us with normal and  aggresive mode, none of them works.
can anyone help me on this?Regards, Ferry Huang

A:Windows Update Failed Error Code 0xc8000247

but when i register the dll, there are some error saying the dll is missing or not valid (something like that),
maybe some DLLs are damaged.

Please start the command prompt (cmd.exe) with admin rights [1] and run sfc [2]:

sfc.exe /scannow

Is it able to find and repair broken files (create the txt file shown under [2] and look if all files are restored)?


best regards
André

[1]
http://windows.microsoft.com/en-US/windows7/How-do-I-run-an-application-once-with-a-full-administrator-access-token

[2]
http://support.microsoft.com/kb/929833 "A programmer is just a tool which converts caffeine into code"

Want to install RSAT on Windows 7 Sp1? Check my HowTo: http://www.msfn.org/board/index.php?showtopic=150221

https://social.technet.microsoft.com/Forums/en-US/54066ae6-d318-4c09-96a0-316e573c9c37/windows-update-failed-error-code-0xc8000247?forum=itprovistamigration
Relevancy 59.34%

I am very frustrated. I have repeatedly tried to install two important updates - Update for Microsoft Office OneNote 2007 (KB980729)
Download size: 4.2 MB
and
Update for the 2007 Microsoft Office System (KB981715)
Download size: 7.4 MB

and have experienced repeated failure, with error code 646. I've tried a number of solutions to know avail. Please help!

My operating system is Vista Business, SP2, 32-bit.

http://www.vistax64.com/windows-updates/277340-error-code-646-failed-download-kb981715-kb980729.html
Relevancy 59.34%

hello about a month I have a problem - code 8000ffff Update error Windows failed with the updates of windows professional bit When I turn on the PC Windows tries to install an Windows Update failed - code error 8000ffff update it hangs at and the pc restarts times before using it after if I click on search updates I have error code ffff I tried microsoft fixit but I Windows Update failed - code error 8000ffff have not resolved this is the file of MGA please help me I'm going crazy Code Diagnostic Report ----------------------------------------- Windows Validation Data-- gt Validation Code Cached Online Validation Code x Windows Product Key - - - -XFPHJ Windows Product Key Hash FjeWkdSWrMt bkVKGJPOMAaHKUo Windows Product ID - - - Windows Product ID Type Windows License Type Volume MAK Windows OS version ID B A - F- E - C -F F FBD Is Admin Yes TestCab x LegitcheckControl ActiveX N A hr x Signed By N A hr x Product Name Windows Professional Architecture x Build lab win sp gdr - TTS Error Validation Diagnostic Resolution Status N A Vista WgaER Data-- gt ThreatID s N A hr x Version N A hr x Windows XP Notifications Data-- gt Cached Result N A hr x File Exists No Version N A hr x WgaTray exe Signed By N A hr x WgaLogon dll Signed By N A hr x OGA Notifications Data-- gt Cached Result N A hr x Version N A hr x OGAExec exe Signed By N A hr x OGAAddin dll Signed By N A hr x OGA Data-- gt Office Status Blocked VLK Microsoft Office Enterprise - Blocked VLK OGA Version N A x Signed By N A hr x Office Diagnostics D FF - - D FF - - D FF - - D FF - - D FF - - D FF - - D FF - - D FF - - Browser Data-- gt Proxy settings N A User Agent Mozilla compatible MSIE Win Default Browser C Users UnoCheScassa AppData Local Google Chrome Application chrome exe Download signed ActiveX controls Prompt Download unsigned ActiveX controls Disabled Run ActiveX controls and plug-ins Allowed Initialize and script ActiveX controls not marked as safe Disabled Allow scripting of Internet Explorer Webbrowser control Disabled Active scripting Allowed Script ActiveX controls marked as safe for scripting Allowed File Scan Data-- gt Other data-- gt Office Details lt GenuineResults gt lt MachineData gt lt UGUID gt B A - F- E - C -F F FBD lt UGUID gt lt Version gt lt Version gt lt OS gt lt OS gt lt Architecture gt x lt Architecture gt lt PKey gt - - - -BBBBB lt PKey gt lt PID gt - - - lt PID gt lt PIDType gt lt PIDType gt lt SID gt S- - - - - - lt SID gt lt SYSTEM gt lt Manufacturer gt Acer lt Manufacturer gt lt Model gt Aspire lt Model gt lt SYSTEM gt lt BIOS gt lt Manufacturer gt Phoenix Technologies LTD lt Manufacturer gt lt Version gt V lt Version gt lt SMBIOSVersion major quot quot minor quot quot gt lt Date gt lt Date gt lt BIOS gt lt HWID gt DA FA lt HWID gt lt UserLCID gt lt UserLCID gt lt SystemLCID gt lt SystemLCID gt lt TimeZone gt W Europe Standard Time GMT lt TimeZone gt lt iJoin gt lt iJoin gt lt SBID gt lt stat gt lt stat gt lt msppid gt lt msppid gt lt name gt lt name gt lt model gt lt model gt lt SBID gt lt OEM gt lt OEMID gt ACRSYS lt OEMID gt lt OEMTableID gt ACRPRDCT lt OEMTableID gt lt OEM gt lt GANotification gt lt MachineData gt lt Software gt lt Office gt lt Result gt lt Result gt lt Products gt lt Product GUID quot - - - - FF CE quot gt lt LegitResult gt lt LegitResult gt lt Name gt Microsoft Office Enterprise lt Name gt lt Ver gt lt Ver gt lt Val gt ACD E lt Val gt lt Hash gt fFic JgCreGGRxyF uMWB R Jcg lt Hash gt lt Pid gt - - - lt Pid gt lt PidType gt lt PidType gt lt Product gt lt Products gt lt Applications gt lt App Id quot quot Version quot quot Result quot quot gt lt App Id quot quot Version quot quot Result quot quot gt lt App Id quot quot Version quot quot Result quot quot gt lt App Id quot quot Version quot quot Result quot quot gt lt App Id quot A quot Version quot quot Result quot quot gt lt App Id quot B quot Version quot quot Result quot quot gt lt App Id quot quot Version quot quot Result quot quot gt lt App Id quot A quot Version qu... Read more

A:Windows Update failed - code error 8000ffff

Open Regedit, - File - Export - save to desktop ( creates backup of your current registery

Then locate and remove:

HKEY_LOCAL_MACHINE\COMPONENTS\PendingXmlIdentifier
HKEY_LOCAL_MACHINE\COMPONENTS\NextQueueEntryIndex
HKEY_LOCAL_MACHINE\COMPONENTS\AdvancedInstallersNeedResolving
Reboot - then check for updates.

Source - Microsoft.

http://www.sevenforums.com/windows-updates-activation/276122-windows-update-failed-code-error-8000ffff.html
Relevancy 59.34%

Hi everyone, First post here. Sorry if there's a rule I'm unaware of that goes against posting this question.  I backed up my files using HP Recovery utlity. Upon reinstallation, I brought the folder to Desktop from an external source. Firstly, the problem is Recovery Manager failed. Error code = FFFFFF 18. This comes up when I click on the Restore.exe from inside the backup folder which contains a .txt file, a few .DLL files and two folders - namely Language and FBData.The FBData contains large SWM files.  I read this post here and the proposed solution but it did not work and I could not view the contents of the SWM files/folders. http://h30434.www3.hp.com/t5/Notebook-Operating-System-and-Recovery/Unable-to-Recover-after-Image-Re...  I am using:HP ENVY Notebook - 17-k251na BIOS:F.43-07/29/2016 OS: Microsoft Windows 8.1 Best regards, 

http://h30434.www3.hp.com/t5/Notebook-Operating-System-and-Recovery/Recovery-Manager-failed-Error-code-FFFFFF-18/td-p/5732390
Relevancy 59.34%

Hi,

I recently reinstalled windows 7 on my computer after experiencing many crashes and update failures. Windows update succesfully installed all the other updates except for service pack 1. I've tried Microsoft fixit tool and Windows system update readiness tool. I've also tried clean boot, disk check, SFC... all without success.
I really don't wish to reinstall windows again for the 100th time
Appreciate your help.

Avi

A:Windows 7 failed to install SP1, error code 800736CC

Check your ram.
Memory Diagnostics Tool
Memtest86+ - Advanced Memory Diagnostic Tool
How to use memtest:
RAM - Test with Memtest86+

Check the hard drive with the manufacturer's diagnostic tools.
Hard Drive Diagnostics Tools and Utilities (Storage) - TACKtech Corp.
Hard Drive Diagnostic Procedure

http://www.sevenforums.com/installation-setup/261395-windows-7-failed-install-sp1-error-code-800736cc.html
Relevancy 59.34%

I have been getting help from Arc over on the BSOD section of this forum site for a few weeks now. I figured I'd start a thread here about the update troubles I've been experiencing over the past few days as well. There is one update that won't apply no matter what I try. I've run the amalgamated .bat tool posted on this forum and that didn't solve my issue. I will let my logs and screenshots speak for themselves from here, though.

Thanks in advance for any help!

As stated in the title, error code is 80073712. Also, I can't seem to get my CBS logs to upload. I keep getting an internal server error about the resource not being available. The screenshot attached perfectly fine. I will try to either edit this post to add them or add them as a comment.

Attachment 298869

A:Security update failed, error code 80073712

Still can't get the CBS.zip to upload. I will attach a screenshot of the error page. I'll try it again later.

Attachment 298870

http://www.sevenforums.com/windows-updates-activation/316272-security-update-failed-error-code-80073712-a.html
Relevancy 59.34%

I m seeing this a few times now on PC that are set to upgrade including one of my own ASUS Windows PC The fix appears to be to do the following - MS appears to be recommending the link on twitter Go into quot C Windows SoftwareDistribution Download quot and delete everything in that folder Now run the command prompt as an administrator Type in quot wuauclt exe updatenow quot Go to your Control Panel gt Windows Update and your Windows should start re-downloading from scratch hopefully without flaws this time https www reddit com r windows comments eyrre fix for the error when trying to install Click to expand Some sites also recommend emptying the recycle bin as well before running the Command Prompt http answers microsoft com en-us owsSupport amp linkId I l edit back in a few hours as my PC has now started to download the files again MB - It already has the hidden files - loaded on the th windows BT windows WS Under C nbsp

Relevancy 59.34%

All of the previous posts I've read have either had this problem solved, or been given a solution that I was afraid might be dated. (two years old)

So of course, the printer can't install because the file for the spooler is "not specified".

Under Services, Spooler reads "failed to read description: Error code 2".

Right-click for "start", it will read: Error 2: The system cannot find the file specified.

Right click for "properties" just brings up: "system cannot find the file specified".

Checking for the Spooler in Registry Edit gave me this:
Is this different from the default, and is that why it's not working?

A:Spooler Failed to read description: Error Code 2

What is the make and model printer? Try uninstalling any printer software then unplugging the USB cable and restart the computer? Then go to the manufacturers support download drivers and type in your printer model # download an updated driver. don't plug in the USB cable till it tells you to in the driver install.

http://www.techsupportforum.com/forums/f217/spooler-failed-to-read-description-error-code-2-a-629686.html
Relevancy 59.34%

I'm trying to install update KB2639308 but it keeps saying that it fails and gives me the error code WindowsUpdate_FFFFFFFE. I looked it up online and it says that it can't update because of malware. However, when I run Norton and do a full system scan it doesn't find anything. I also tried to fix it with the Windows Update Troubleshooter and that doesn't help either. Is there anything else I can do without having to fully reinstall Windows 7 like the info on the site says? Please help.

A:Failed Windows Update, error code WindowsUpdate_FFFFFFFE

Hi,

A pre-requisite for this update is having Service Pack 1 installed. Can you confirm that this is the case?

Also, which version of Norton are you running? Is it the very latest? I have found posts where running Microsoft's own MSE doesn't find any malware, yet the error this occurs, so lets try something totally different:

Please perform an online virus scan using ESET
ESET Online Scanner

Can you also please run this tool to allow us to diagnose any other conditions that might prevent this update installing:

http://go.microsoft.com/fwlink/?linkid=52012

1. Click the Continue button.
2. Click Copy button (ignore any error messages if they appear)
3. Paste the results here in your next reply

Regards,
Golden

http://www.sevenforums.com/windows-updates-activation/220812-failed-windows-update-error-code-windowsupdate_fffffffe.html
Relevancy 59.34%

Dear sir nbsp HP -n TX pavilion ultrabook original windows bit nbsp i nbsp created recovey image on USB flash drive GB nbsp Recovery image 0xEFFFFF08 Error Manager = code Recovery HP failed. was created successfully nbsp apter i got autoupdate on my machine for windows Windows was installed successfully but somehow i noticed a delayed boot uptime inwindoes so thought of going back to Windows since it's apretty new machine with good configurationI did not create backup media for windows I used recovery manager restore to factory condition option to go back to windows by pugging in usb stick on right hand side usb port of the system nbsp I used recovery manager restore to factory condition option to go back to HP Recovery Manager failed. Error code = 0xEFFFFF08 windows by pugging in usb stick on right hand side usb port of the systemI used HP Recovery Manager failed. Error code = 0xEFFFFF08 restote without backing up files option and it took more than days to perform the steps before getting the above error mesage at close to stage I was wondering why it could take so long to recover the machine i read some posts online and then somewhere in HP forums it was mentioned that try to plug in the usb stick on left hand side port and then restore I plugged in USB stick on left hand side it went back to nbsp with in - minutes of time but again got the same error message close to or I unplugged the usb stick and tried again at same port with same error message code In total i have tried - times trying different options with no luck Please advise how can i restore windows now at the moment no OS is installed on the mahcine i treid the hard disk and memory check both passed and seems to be working fine Best Regards P S Weerawardana nbsp

http://h30434.www3.hp.com/t5/Notebook-Operating-System-and-Recovery/HP-Recovery-Manager-failed-Error-code-0xEFFFFF08/td-p/5679427
Relevancy 59.34%

I have the problem with HP Pavilion Notebook P1Q20EA.
Any idea how to solve this?
 
 am not enable to run recovery, although I have recovery disk and the recovery drive is untouched. Anyone here from HP support?

A:Windows 10 Recovery failed ; Error code: 0xc000000f

Hi @OMH7, Welcome to the HP Forum! This is a wonderful location to converse with  the community, get assistance and find tips . For you to have a rewarding experience, I would like to include the following link for your perusal and reference. First Time Here? Learn How to Post and More I understand you are having a difficulty doing a recovery, although you do have disks and the recovery partition. I am glad to help with that.Here is a link to HP PCs - Performing an HP System Recovery (Windows 10), which will explain the issue and how to overcome it. Best of Luck! Please let me know if this information helps you resolve the issue by marking this post as "Accept as Solution". This will help others easily find the information they may be looking for.  Also, clicking the" Thumbs up" below is a great way to say thanks!   





Sparkles1

http://h30434.www3.hp.com/t5/Notebook-Operating-System-and-Recovery/Windows-10-Recovery-failed-Error-code-0xc000000f/td-p/5540886
Relevancy 59.34%

I Im getting an error when trying to add a components it says visual basic 6.0 object library not registered and underneath that it shows c\window\syswow64\mscomctil.ocx, how can i fixes this I have tried a lot of programs to fix the registry error fixes , but it still dose not work. What can I do to make my visual basic 6.0 work, I have installed and uninstalled the software and i still get this error. thanks
Andrea

A:call to DLLRegisterServer failed error code 0x80020009

Google has lots of info for this: windows 8 visual basic 6

Perhaps you need to download a updated version?

http://www.eightforums.com/general-support/25620-call-dllregisterserver-failed-error-code-0x80020009.html
Relevancy 59.34%

I have recently updated my preloaded window to However after the update it does not accept Windows 8 Failed: 0xC004C003 Code Activation 8.1 Error & my old window key and requires me to activate again using a product key Here is the error code xC C My nbsp DELL XPS nbsp came with a preloaded copy of window and yes it has a window sticker at the back and was fully activated before I updated to windows nbsp nbsp And as far as I know system which comes with preloaded Windows 8 & 8.1 Activation Failed: Error Code 0xC004C003 window has its product key injected to the nbsp motherboard and is a free update for window users So why the update does not accept my window key and ask me for a new key I know my window key cannot be used for any other system because the key is injected in the motherboard and I don t even know the key myself So what can I do now for my Window to be activated again More frustration is that I can t get back to windows I tried to reset to the factory image by using DELL backup amp Recovery software built in the system However after resetting to the factory image it does not accept embedded product key nbsp Here is nbsp details from the Diag Report nbsp lt DiagReport gt lt LicensingData gt nbsp lt ToolVersion gt lt ToolVersion gt nbsp lt LicensingStatus gt SL LICENSING STATUS NOTIFICATION lt LicensingStatus gt nbsp lt LicensingStatusReason gt xC F lt LicensingStatusReason gt nbsp lt LocalGenuineState gt SL GEN STATE INVALID LICENSE lt LocalGenuineState gt nbsp lt LocalGenuineResultP gt lt LocalGenuineResultP gt nbsp lt LastOnlineGenuineResult gt lt LastOnlineGenuineResult gt nbsp lt GraceTimeMinutes gt lt GraceTimeMinutes gt nbsp lt TotalGraceDays gt lt TotalGraceDays gt nbsp lt ValidityExpiration gt lt ValidityExpiration gt nbsp lt ActivePartialProductKey gt T lt ActivePartialProductKey gt nbsp lt ActiveProductKeyPid gt - - -AAOEM lt ActiveProductKeyPid gt nbsp lt OSVersion gt lt OSVersion gt nbsp lt ProductName gt Windows lt ProductName gt nbsp lt ProcessorArchitecture gt x lt ProcessorArchitecture gt nbsp lt EditionId gt Core lt EditionId gt nbsp lt BuildLab gt win gdr - lt BuildLab gt nbsp lt TimeZone gt Pacific Standard Time GMT- lt TimeZone gt nbsp lt ActiveSkuId gt e b b- e - f - f-c f b ac lt ActiveSkuId gt nbsp lt ActiveSkuDescription gt Windows R Operating System OEM DM channel lt ActiveSkuDescription gt nbsp lt ProductUniquenessGroups gt c -d - d - e-d ec f f lt ProductUniquenessGroups gt nbsp lt ActiveProductKeyPKeyId gt ebfad c-bf e-b - -af a e lt ActiveProductKeyPKeyId gt nbsp lt ActiveProductKeyPidEx gt - - - - - - - lt ActiveProductKeyPidEx gt nbsp lt ActiveProductKeyChannel gt OEM DM lt ActiveProductKeyChannel gt nbsp lt ActiveVolumeCustomerPid gt lt ActiveVolumeCustomerPid gt nbsp lt OfflineInstallationId gt lt OfflineInstallationId gt nbsp lt DomainJoined gt false lt DomainJoined gt nbsp lt ComputerSid gt S- - - - - - lt ComputerSid gt nbsp lt ProductLCID gt lt ProductLCID gt nbsp lt UserLCID gt lt UserLCID gt nbsp lt SystemLCID gt lt SystemLCID gt nbsp lt CodeSigning gt SIGNED INFO PRS SIGNED lt CodeSigning gt nbsp lt ServiceAvailable gt true lt ServiceAvailable gt nbsp lt OemMarkerVersion gt x lt OemMarkerVersion gt nbsp lt OemId gt DELL nbsp lt OemId gt nbsp lt OemTableId gt AS nbsp nbsp lt OemTableId gt nbsp lt Manufacturer gt Dell Inc lt Manufacturer gt nbsp lt Model gt XPS One lt Model gt nbsp lt InstallDate gt - lt InstallDate gt lt LicensingData gt lt HealthCheck gt nbsp lt Result gt PASS lt Result gt nbsp lt TamperedItems gt lt TamperedItems gt lt HealthCheck gt lt GenuineAuthz gt nbsp lt ServerProps gt xc f lt ServerProps gt lt GenuineAuthz gt lt DiagReport gt

A:Windows 8 & 8.1 Activation Failed: Error Code 0xC004C003

Successfully activated Windows 8.1 after installed the latest version of BIOS.

http://en.community.dell.com/support-forums/software-os/f/4677/t/19537852
Relevancy 59.34%

I have been trying to do a backup with system image since Jan th on an Iomega TB external HD Tried about times and each time the backup fails at The message I receive with each failure is as follows- quot Windows backup several 57% error Backup 0x81000039 at code failed times with encountered an error when accessing the remote shared file The semaphore timeout period has expired Details Error code x quot I chatted with a tech from my external HD manufacturer and he finally told me that the problem was with my OS and settings I tried doing a backup on a different external HD and still failed at I have no idea which remote shared file the program is looking for I have a home network Backup failed at 57% several times with error code 0x81000039 and one other computer That laptop was turned on so if it was looking for a file there it was available The tech suggested that I turn off my antivirus and firewall and if I was concerned about intrusion to disconnect from the internet Did that and the backup still failed I have the same setup on desktop and laptop Windows SP Vipre antivirus and firewall Backup failed at 57% several times with error code 0x81000039 and I was able to do a backup on my laptop Another slight problem is when I have the Iomega HD running my computer will freeze randomly Backup failed at 57% several times with error code 0x81000039 For this reason I don't keep it on all the time but just turn on for a monthly backup I was able to do one initial backup on that HD with no problem I was told to look at the windows backup log files but they all have a etl extension and I do not know how to open them to see if the logs give me any idea what file it is hanging up on Please help me with this I need to do a backup

A:Backup failed at 57% several times with error code 0x81000039

Event viewer - Application and Service Logs -> Microsoft > Windows > Backup. In that "folder" you can see all the System Image-related events that were logged. Start browsing and read the lower pane (both XML and the other view - whatever the "easy" view is called). It may show exactly what hung it at 57%.

http://www.sevenforums.com/backup-restore/209608-backup-failed-57-several-times-error-code-0x81000039.html