Windows Support Forum

error 800736B3 on 4 updates

Q: error 800736B3 on 4 updates

hello

i'm stuck with these 4 updates. i've tried fixit, the big 500mo windows update correction program, manual installation etc nothing works
i also have huge log files in my cbs folder (almost 5Go) . the cbs.log is almost 1Go

here are the updates :
kb2977629
kb2972211
kb2973112
kb2982378

thanks you for your help !

Relevancy 100%
Preferred Solution: error 800736B3 on 4 updates

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: error 800736B3 on 4 updates

Please follow the Windows Update Posting Instructions and post the requested data
If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

http://www.sevenforums.com/windows-updates-activation/346737-error-800736b3-4-updates.html
Relevancy 78.26%

Hello,

My Windows 7 x64 Home Premium updates are failing with error code 800736B3

I've tried the "Update Readiness Tool for Windows 7 x64" and they still fail.

I've tried SFC /SCANNOW and they still fail.

Please Help!!

Thank You!

Rob S.

A:Windows 7 Updates Failing Error 800736B3

Hello Rob,

Lets run SURT to see if it gives an indication of a corruption:

Download and run System Update Readiness Tool (SURT)
Please go Here and download the System Update Readiness Tool (SURT). Save this file to your desktop
Go to your desktop and run KB947821
When the SURT finishes installing, Please continue.
SFC /SCANNOW

Click on the button. Inside the search box type in CMD
Right click on CMD => Choose Run as Administrator
Inside the Command Prompt windows copy and paste the following command SFC /SCANNOW
Please wait for this to Finish before continuing with the rest of the steps.

Export CBS folder
Click the Start button then click Computer.
Double-click on the C: drive, under the Hard Disk Drives category, and then scroll down to, and double click on the Windows folder.
Find and double click on the Logs folder.
Right-click on the CBS folder, and select Copy.
Go back to your Desktop, right-click on it, and select Paste. You should now see a copy of the CBS folder appear on your Desktop called CBS.
Right-click on this new folder, and navigate through Send to, and select Compressed (zipped) folder.
A new file, also called CBS (CBS.zip), but this time with a different icon, will be created.
Attach this to your next post please.
Please Note:: if the file is too big to upload to you next please post please upload via Dropbox or ge.tt

http://www.techsupportforum.com/forums/f217/windows-7-updates-failing-error-800736b3-886089.html
Relevancy 78.26%

For months now I've had windows tell me that I have some updates to be installed. Every time I try it fails to update giving me the error code: 800736B3.

A:Error Code: 800736B3 with 7 failed updates

also my cbs.log was too big to fit in that one post so i had to make another one.

http://www.sevenforums.com/windows-updates-activation/343776-error-code-800736b3-7-failed-updates.html
Relevancy 78.26%

Hello, I am having a small issue with Windows update. Windows 7 Home Premium, 64BIT OEM on HP Pavilion.

Window Update failing error code 800736B3

I have followed the SFC, update readiness, and clean boot procedures listed in the thread I linked above. I believe I have a SIMILAR issue (not the same).

Can anyone give me a light in the proper direction?

SFC found nothing, readiness tool ran and installed hotfix but did not fix issue. I also tried to install updates 1 at a time, to not avail, as well as the clean boot.

Based on my checksur log, I have the following:

Checking Package Watchlist
(f) CBS Watchlist Package Missing 0x80070002 Microsoft-Windows-Embedded-SKU-Foundation-Package~31bf3856ad364e35~amd64~~0.0.0.0 Microsoft-Windows-InternetExplorer-Package~31bf3856ad364e35~amd64~~10.2.9200.16521 Package registry presence failed, possibly an orphaned package on package watchlist

But I am unsure where to go or how to continue at this point. Any sugegstions?

http://www.sevenforums.com/windows-updates-activation/381411-update-error-800736b3-updates-failed.html
Relevancy 78.26%

Hello,

My Windows 7 x64 Home Premium updates are failing with error code 800736B3

I've tried the "Update Readiness Tool for Windows 7 x64" and they still fail.

I've tried SFC /SCANNOW and they still fail.

Please Help!!

Thank You!

Rob S.
 

A:Windows 7 Updates Failing Error 800736B3

Which update is failing
 

https://forums.techguy.org/threads/windows-7-updates-failing-error-800736b3.1132460/
Relevancy 77.4%

Hi after successfully installing windows my first windows install since XP after which I moved to Ubuntu and doing the initial set-up etc installing my own anti virus software and MS Office etc I thought it was time to let it update itself however every time I tell it to update then shut down it fails I tried to troubleshoot updates failing 800736B3 with 7 Windows code error it using the MS help box which was very little actual help and then tried to initiate the update manually however when it comes to installing some windows security and system updates and some IE updates installation fails resulting in error code B whatever that means The updates it fails on are Quote security update for INternet explorer for windows KB security update for windows KB security update for windows KB update for Windows 7 updates failing with error code 800736B3 internet explorer compatability view list for windows KB update for internet explorer for windows KB update for windows KB I'm currently running avast v home edition following win informing me that it would not allow AVG to run it was from an 'untrusted source' apparently despite having been working a few days previously but thats another problem entirely Any help than can be offered will be much obliged All I've been able to Windows 7 updates failing with error code 800736B3 turn up from googling is a command that un-registers windows which then for some reason allows the updates to occur following which I can use my original activation code given to me by digital river with the student upgrade deal to re-activate windows although I am reluctant to try this Many thanks civint

A:Windows 7 updates failing with error code 800736B3

Have never had Avast free home interfere with anything, but you can disable it to try the Updates by right clicking it's icon in system tray and "turn off real time protection"

I note that another recent thread on this error found by Googling also remains unresolved.

If you bought your Win7 retail, you are entitled to MS excellent tech support which will work the case through to satisfaction. Those Updates are standard and can wait a few days.

http://www.sevenforums.com/installation-setup/36366-windows-7-updates-failing-error-code-800736b3.html
Relevancy 66.22%

Hi! Since the beginning of may (May 3rd) every update has failed and they've been stacking up to the point where there's now 25 updates I've missed.

I've googled the issue and tried running "Fixit" and CheckSUR but nothing has helped.
I'm now desperate and annoyed because of all this. That's why I'm coming to you on this forum. You seem to have a lot of knowledge on these topics.

Since I'm new to this, I don't really know which files and logs to attach so if someone explained it to me I'll be able to post them ASAP

A:25 failed updates - 800736B3

I'm not one of the experts you are needing but they will want you to do this first.

A tutorial by tom982

Windows Update Posting Instructions

http://www.sevenforums.com/windows-updates-activation/344038-25-failed-updates-800736b3.html
Relevancy 64.93%

I am dealing with interesting but messy situation with almost new PC PC specs Lenovo ThinkCentre M p Windows Pro x While windows updates were working normally initially they are not working at all anymore - all OS updates are failing and do not install with error code B I have tried different voodoo for me tricks to no avail Manually downloaded individual update fails to install as well Another issue are huge CBS log approx MB before cab files are auto-done What I have done - run SFC scannow several times before and after running SURT result is always quot Windows Resource Protection found corrupt files but was unable to fix some of them quot - all, 800736B3 at 7 errors x64 working Updates and not Win 80246007 Pro run SURT - run quot Windows Update Diagnostic quot result is rather confusing - it keeps mentioning x not fixed but then show as fixed in details - I am attaching screenshots as well deleting renaming specific folders as was advised in several forums Win 7 Pro x64 Updates not working at all, errors 800736B3 and 80246007 restarting WU BITS services The issue remains same as before - Windows updates are still not installing Mostly they fail with B sometimes with same quot KB quot update Fresh CheckSUR log is clean but I am attaching CheckSUR persist with some issues for reference I am also attaching two partial CBS log files after deleting CBS log at some point If older CBSpersist are needed I can provide them but they are big MB - MB per file Can gurus please help Thank you in advance EDIT At moment there are critical updates that do not install

A:Win 7 Pro x64 Updates not working at all, errors 800736B3 and 80246007

Bump: any knowledgeable good soul around?

http://www.sevenforums.com/windows-updates-activation/364554-win-7-pro-x64-updates-not-working-all-errors-800736b3-80246007-a.html
Relevancy 63.21%

I've re-run the updates several times and gone through the System File Check process, run the MS suggested Fix-It, and run the System Update Readiness program, but still can't get these two updates to install. Attached is the CBS.zip.

A:Two security updates fail: KB293135 (800736B3) & KB2926765 (8007000D)

CheckSUR fixed a number of problems - but was also unable to fix a few.
Here's the failure list...

Code:
Unavailable repair files:
winsxs\manifests\amd64_microsoft-windows-shell32_31bf3856ad364e35_6.1.7601.18429_none_ca494925289f2f1e.manifest
winsxs\manifests\wow64_microsoft-windows-shell32_31bf3856ad364e35_6.1.7601.18429_none_d49df3775cfff119.manifest
winsxs\manifests\amd64_microsoft-windows-shell32_31bf3856ad364e35_6.1.7601.22639_none_cac817ea41c4e800.manifest
winsxs\manifests\wow64_microsoft-windows-shell32_31bf3856ad364e35_6.1.7601.22639_none_d51cc23c7625a9fb.manifest
servicing\packages\Package_2_for_KB2926765~31bf3856ad364e35~amd64~~6.1.1.1.mum
servicing\packages\Package_2_for_KB2926765~31bf3856ad364e35~amd64~~6.1.1.1.mum
servicing\packages\Package_for_KB2926765_SP1~31bf3856ad364e35~amd64~~6.1.1.1.mum
servicing\packages\Package_for_KB2926765_SP1~31bf3856ad364e35~amd64~~6.1.1.1.mum
servicing\packages\Package_for_KB2926765~31bf3856ad364e35~amd64~~6.1.1.1.mum
servicing\packages\Package_for_KB2926765~31bf3856ad364e35~amd64~~6.1.1.1.mum
servicing\packages\Package_2_for_KB2926765~31bf3856ad364e35~amd64~~6.1.1.1.cat
servicing\packages\Package_2_for_KB2926765~31bf3856ad364e35~amd64~~6.1.1.1.cat
servicing\packages\Package_for_KB2926765_SP1~31bf3856ad364e35~amd64~~6.1.1.1.cat
servicing\packages\Package_for_KB2926765_SP1~31bf3856ad364e35~amd64~~6.1.1.1.cat
servicing\packages\Package_for_KB2926765~31bf3856ad364e35~amd64~~6.1.1.1.cat
servicing\packages\Package_for_KB2926765~31bf3856ad364e35~amd64~~6.1.1.1.cat
I'll post a fix for them a little later - gotta eat soon!

http://www.sevenforums.com/windows-updates-activation/333171-two-security-updates-fail-kb293135-800736b3-kb2926765-8007000d.html
Relevancy 58.05%

Hello I've been pulling my hair out trying to install SP for win for some time and have had no luck or useful support from Microsoft on the issue I've 800736B3 Error 7 SP1 Windows run the CheckSUR multiple times I've posted the log below I've run the sfc program and when it finishes is says quot Windows Resource Protection did not find any integrity violations quot I've posted Windows 7 SP1 Error 800736B3 the CBS log below I've uninstalled AVG and tried to run the update same error I've run all the fixes that could be connected to the error No Help I've downloaded the SP package as a standalone installation same error I've tried to run a repair installation from the Win disk no improvement So here I am asking if anyone has an answer for me I have some software that will only run with SP installed so I need to figure this out and I would rather not do a fresh install if possible Thanks in advance for any help you can provide

A:Windows 7 SP1 Error 800736B3

Press the Windows Flag key and the Pause key and post a picture using this tutorial by Brink:

Screenshots and Files - Upload and Post in Seven Forums

http://www.sevenforums.com/windows-updates-activation/367395-windows-7-sp1-error-800736b3.html
Relevancy 58.05%

I've run the System file checker and that didn't find anything, I fully reset the windows update service to where it says I've never updated. I've tried the Readniss update tool and I'm repairing .Net now. Any suggestions? Whats the next step?

A:Tried many things, still error 800736B3

Windows Update Posting Instructions

http://www.sevenforums.com/windows-updates-activation/282189-tried-many-things-still-error-800736b3.html
Relevancy 57.19%

Can anyone help me with these errors? I have had this error for about a day and have found know help on Google so please if you can help in anyway, thanks in advance!

A:How to fix the error codes 80072EFE and 800736B3

The 80072EFE error is simply a bad internet connection - although that can be due either to physical problems or software interferences by malware, firewalls, etc.

The 800736B3 error is somewhat different.

Please follow the Windows Update Posting Instructions and post the requested data.

http://www.sevenforums.com/windows-updates-activation/290374-how-fix-error-codes-80072efe-800736b3.html
Relevancy 57.19%

Hi Win SP fails installation with Error Code B I have tried a the solutions as suggested by microsoft without luck I also re-installed Win Ultimate using the Upgrade Win Installation 800736B3 SP1 7 Error Code option but the situation is unchanged According to the log of CheckSUR there is CSI missing identity and CSI Payload files missing CSI Below is the CheckSUR file contents Checking System Update Readiness Binary Version Package Version - - Checking Windows Servicing Packages Checking Package Manifests and Catalogs Checking Package Watchlist Checking Component Watchlist Checking Packages Checking Component Store f CSI Payload File Missing x jsproxy dll x microsoft-windows-i tocolimplementation bf ad e none a bc d dc f CSI Missing Identity x appid prnxx inf bf ad e ad fefc dc f CSI Payload File Missing x iiswmi mfl x microsoft-windows-i atibility resources bf ad e ar-sa a c b f fc Summary Seconds Win 7 SP1 Installation Error Code 800736B3 executed Found errors CSI Missing Identity Total count CSI Payload File Missing Total count CheckSUR persist contents Checking System Win 7 SP1 Installation Error Code 800736B3 Update Readiness Binary Version Package Version - - Checking Win 7 SP1 Installation Error Code 800736B3 Windows Servicing Packages Checking Package Manifests and Catalogs Checking Package Watchlist Checking Component Watchlist Checking Packages Checking Component Store f CSI Payload File Missing x jsproxy dll x microsoft-windows-i tocolimplementation bf ad e none a bc d dc f CSI Missing Identity x appid prnxx inf bf ad e ad fefc dc f CSI Payload File Missing x iiswmi mfl x microsoft-windows-i atibility resources bf ad e ar-sa a c b f fc Summary Seconds executed Found errors CSI Missing Identity Total count CSI Payload File Missing Total count Checking System Update Readiness Binary Version Package Version - - Checking Windows Servicing Packages Checking Package Manifests and Catalogs Checking Package Watchlist Checking Component Watchlist Checking Packages Checking Component Store f CSI Payload File Missing x jsproxy dll x microsoft-windows-i tocolimplementation bf ad e none a bc d dc f CSI Missing Identity x appid prnxx inf bf ad e ad fefc dc f CSI Payload File Missing x iiswmi mfl x microsoft-windows-i atibility resources bf ad e ar-sa a c b f fc Summary Seconds executed Found errors CSI Missing Identity Total count CSI Payload File Missing Total count How can I resolve this and install SP Thanks erwin

A:Win 7 SP1 Installation Error Code 800736B3

We need the CBS.log as well please...

Please follow the Windows Update Posting Instructions and post the requested data

http://www.sevenforums.com/windows-updates-activation/312694-win-7-sp1-installation-error-code-800736b3.html
Relevancy 57.19%

I am running Win Pro SP x on my Macbook Air using Parallels One VM is working perfectly and is accepting all updates the other suddenly stopped accepting updates starting July I have checked Seven Forums Microsoft and Googled and tried all the suggested things NoelDP seems to be successful at helping folks resolve their issues I've run SURT a number of time in different combinations restart no restart SFC scan did not return any problems I cleared the updates and the downloaded files The error codes are all B there were a few others that have disappeared since I tried the different methods to resolve see screen shot from My CBS zip file is MB and to big to upload I will - Error resistant to solution 800736B3 attach a log file that I copied I noticed that some of the KB in the list of pending updates are for x but that does not seem completely unusual I manually downloaded and installed and X and it failed too KB There is a screenshot of update history included I will gladly post Error 800736B3 - resistant to solution all the links that I used if desired Your help is appreciated because I must have spent hours configuring this VM of Windows before it started failing the updates

A:Error 800736B3 - resistant to solution

I have uncovered something that may help with the issue.
Using https://support.microsoft.com/en-us/kb/827218 the automatic detection says I have 32-bit OS but when I check manually it displays that I am using a 64-bit system. See attached images

http://www.sevenforums.com/windows-updates-activation/376928-error-800736b3-resistant-solution.html
Relevancy 57.19%

Hello!

I have tried several days to run the KB3000869 update to my Win 7 laptop without success. It always fails and the error code is every time 800736B3.

I have run ccleaner, sfc /scannow, SURT and several other tools but none of them has helped.

My CBS logs can be found here:
https://www.sendspace.com/file/n2sh16

Can you help me?

Regards,

Jari

A:Error 800736B3 when updating KB3000869 to my Win 7

CheckSUR shows the following problems...

Code:
Unavailable repair files:
servicing\packages\Package_for_KB3000869~31bf3856ad364e35~amd64~~6.1.1.0.mum
servicing\packages\Package_for_KB3000869~31bf3856ad364e35~amd64~~6.1.1.0.cat
I can find no SFC results - but your CBS.log is a mass of errors...

Code:
2014-11-07 22:54:49, Info CBS Appl: Selfupdate, Component: x86_microsoft-windows-packager_31bf3856ad364e35_0.0.0.0_none_11ea043118e85a4e (6.1.7601.22809), elevation:3, lower version revision holder: 6.1.7601.18601
2014-11-07 22:54:49, Info CBS Setting ExecuteState key to: CbsExecuteStateInitiateRollback | CbsExecuteStateFlagAdvancedInstallersFailed
2014-11-07 22:54:49, Info CSI 0000000e Performing 1 operations; 1 are not lock/unlock and follow:
Install (5): flags: 0 tlc: [463c680c5e60b54714ba3d0d41563004, Version = 6.1.7601.18601, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral]) ref: ( flgs: 00000000 guid: {d16d444c-56d8-11d5-882d-0080c847b195} name: [l:154{77}]"Package_1_for_KB3000869~31bf3856ad364e35~amd64~~6.1.1.0.3000869-2_neutral_GDR" ncdata: [l:4{2}]"17") thumbprint: (null)
2014-11-07 22:54:49, Error CSI 0000000f@2014/11/7:20:54:49.743 (F) d:\win7sp1_gdr\base\wcp\componentstore\storelayout.cpp(8701): Error STATUS_SXS_ASSEMBLY_NOT_FOUND originated in function ComponentStore::CRawStoreLayout::QueryComponentUnstagedFiles expression: (null)
[gle=0x80004005]
2014-11-07 22:54:52, Error CSI 00000010 (F) STATUS_SXS_ASSEMBLY_NOT_FOUND #53126# from CCSDirectTransaction::PerformChangeAnalysis(...)[gle=0xd0150004]
2014-11-07 22:54:52, Error CSI 00000011 (F) STATUS_SXS_ASSEMBLY_NOT_FOUND #53125# from CCSDirectTransaction::PrepareForCommit(...)[gle=0xd0150004]
2014-11-07 22:54:52, Error CSI 00000012 (F) STATUS_SXS_ASSEMBLY_NOT_FOUND #53124# from CCSDirectTransaction::ExamineTransaction(...)[gle=0xd0150004]
2014-11-07 22:54:52, Error CSI 00000013 (F) STATUS_SXS_ASSEMBLY_NOT_FOUND #53123# from CCSDirectTransaction_IRtlTransaction::ExamineTransaction(...)[gle=0xd0150004]
2014-11-07 22:54:52, Error CSI 00000014@2014/11/7:20:54:52.380 (F) d:\win7sp1_gdr\base\wcp\componentstore\storelayout.cpp(8701): Error STATUS_SXS_ASSEMBLY_NOT_FOUND originated in function ComponentStore::CRawStoreLayout::QueryComponentUnstagedFiles expression: (null)
[gle=0x80004005]
We'll see what effect fixing the CheckSUR errors has - I'll post a fix soon.

http://www.sevenforums.com/windows-updates-activation/351549-error-800736b3-when-updating-kb3000869-my-win-7-a.html
Relevancy 57.19%

error installing updates KB2998812 , KB2977759 and KB976932 reverting changes

attaching CBS Logs collection

A:error code 80073AA2 and 800736B3

KB2998812 , KB2977759 installed, error code 80073AA2 solved by deleting WINEVT folder in registry

http://www.sevenforums.com/windows-updates-activation/354865-error-code-80073aa2-800736b3.html
Relevancy 57.19%

I have lurked in this forum in the past - always finding answers. Thanks to all the experts contributing to this forum.

This time I joined so I could post, as I have been unable to find a solution to my problem.

I can install all updates except for SP1. I keep getting error 800736B3.

I ran the Update Troubleshooter, which claims to have repaired Win Update components - still same error.

I then successfully ran the hotfix KB947821. The same error occurs.

I ran sfc /scannow & no integrity violations were found.

I also tried again after a clean boot - same error.

I don't have a clue as to what to try now. Any suggestions?

A:Error Code 800736B3 on SP1 Update

Try reading here

Hopefully stuff in there will help.

http://www.sevenforums.com/windows-updates-activation/146628-error-code-800736b3-sp1-update.html
Relevancy 57.19%

Hi
I have problems with Windows Update, it does not install updates.
I have run SURT and SFC Scan.
Logs enclosed.

Many thanks for your help!

A:Windows Update: error 800736B3

This is the only error in the SFC scan...

Code:
Line 3507: 2015-02-27 11:22:03, Info CSI 00000310 [SR] Repairing 1 components
Line 3508: 2015-02-27 11:22:03, Info CSI 00000311 [SR] Beginning Verify and Repair transaction
Line 3511: 2015-02-27 11:22:03, Info CSI 00000313 [SR] Cannot repair member file [l:22{11}]"PINTLGB.IMD" of Microsoft-Windows-IME-Simplified-Chinese-Core, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
Line 3514: 2015-02-27 11:22:04, Info CSI 00000315 [SR] Cannot repair member file [l:22{11}]"PINTLGB.IMD" of Microsoft-Windows-IME-Simplified-Chinese-Core, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
Line 3515: 2015-02-27 11:22:04, Info CSI 00000316 [SR] This component was referenced by [l:202{101}]"Microsoft-Windows-Foundation-Package~31bf3856ad364e35~amd64~~6.1.7601.17514.WindowsFoundationDelivery"
Line 3520: 2015-02-27 11:22:04, Info CSI 00000319 [SR] Could not reproject corrupted file [ml:520{260},l:62{31}]"\??\C:\Windows\IME\IMESC5\DICTS"\[l:22{11}]"PINTLGB.IMD"; source file in store is also corrupted
Line 3533: 2015-02-27 11:22:05, Info CSI 0000031b [SR] Repair complete
I'll post a fix protocol later.

http://www.sevenforums.com/windows-updates-activation/362678-windows-update-error-800736b3.html
Relevancy 57.19%

Im getting this error code 800736B3. Can anyone help me.

A:error code 800736B3 installing SP1

Put the win7 disc in and choose upgrade then after that it will restart.

After you have acepted the upgrade it will allow you to install the sp1 .

Once win7 has upgraded ,but still keeping your system in tact ,will start the whole update process. After about a hour or two of updates it will install sp1 with no issue .

Also if you are useing a highend gaming card virus protect etc it might keep it from installing as well

http://www.sevenforums.com/windows-updates-activation/149630-error-code-800736b3-installing-sp1.html
Relevancy 57.19%

I have a computer that has been failing to install the IE cumulative updates. It is now also failing to install the bundled security updates (KB3192391 for example). I have tried the system readiness tool, clearing out the database, manually installing,
removing/re-adding IE from Windows features, and running SFC scan. I cannot find a solution for error 800736B3. Anyone know any other things I can do?
This is for a business computer. Would I qualify for free Microsoft support? If I do, how do I start that process?

https://social.technet.microsoft.com/Forums/en-US/77791b84-fa65-4e6b-a2ff-6ab21a7e926e/windows-update-error-800736b3?forum=w7itprosecurity
Relevancy 57.19%

Okay I currently have the CBS file compressing but here's the basic rundown of my problem: Updates fail to install and gives me error code 800736B3, no matter how I try to install them, one at a time, all at once, on shutdown, while computer is running, etc. It has continually asked me to run checkdisk when I turn it on and won't run unless I do, and when it does run, it deletes files that are Corrupted, I think? Has crashed my computer once this past week which made me begin to look into the issue

Edit- The file won't attach normally so I've uploaded it to a public Google drive.
Link for that is here. https://drive.google.com/folderview?...Tg&usp=sharing

A:Windows Update Error 800736B3

Can you complete this Tutorial. If you can please do.

Windows Update Posting Instructions

http://www.sevenforums.com/windows-updates-activation/373124-windows-update-error-800736b3.html
Relevancy 56.76%

Hi,

I'm stuck with 43 waiting updates and the update error 800736B3.
Tried now several approaches from the forum to get it resolved, but no resolution of the issue until now.

sfc /scannow reports no issues.

So I ran the upgrade pack to produce to cbs log.

Maybe one could give me a hint how or if it could be resolved somehow.

Thanks in advance.

Northseasurfer

A:Win 7 Prof. 64bit Update error 800736B3

There's no problems showing in any of the data files.
Please upload your C:\Windows\windowsupdate.log file.

http://www.sevenforums.com/windows-updates-activation/360820-win-7-prof-64bit-update-error-800736b3.html
Relevancy 56.76%

Hi,

This is my first post, and not all that clever with pcs, so apologies in advance if I've missed something out.

I have been getting this error code repeatedly when trying to install update KB2922229 for a couple of months now. Never had any problems before. Other updates were installing just fine, but I am now getting the same error code when trying to install update KB2871997. As both of these updates seem to be related to security, I am getting a bit concerned.

I have followed the steps in the Windows Update Posting Instructions, running SURT and an SFC scan. Logs attached.

Hope someone will be kind enough to help with this.

A:Windows Update Error Code 800736B3

I have never seen such a CheckSUR summary before!

Code:
Summary:
Seconds executed: 94
Found 6833 errors
Fixed 6833 errors
CSI Catalog Missing Total count: 7
Fixed: CSI Catalog Missing. Total count: 7
CSI Missing Component Key Total count: 927
Fixed: CSI Missing Component Key. Total count: 927
CSI Missing Pinned Component Key Total count: 15
Fixed: CSI Missing Pinned Component Key. Total count: 15
CSI Missing Identity Total count: 2026
Fixed: CSI Missing Identity. Total count: 2026
CSI Missing C Mark Total count: 1617
Fixed: CSI Missing C Mark. Total count: 1617
CSI Payload File Missing Total count: 24
Fixed: CSI Payload File Missing. Total count: 24
CSI F Mark Missing Total count: 2232
Fixed: CSI F Mark Missing. Total count: 2232
The SFC scan is clear - which in view of the above, is rather surprising.

Have you tried installing the updates again since running the CheckSUR/SURT?

If not, please do so, and let us know what happens - First do a check for Updates, and see if the updates appear at all - they may not.

http://www.sevenforums.com/windows-updates-activation/332755-windows-update-error-code-800736b3.html
Relevancy 56.76%

CBS.zip is attached. can anyone help with this error code. I cannot run windows update. This error code 800736B3 is the result every time. I have ran cmd spf scan, I have ran the window repair tools. Nothing will do it. Can someone please help?

A:Windows update error code 800736B3

Hello and welcome tenlakes mate I see you have done the sfc and I would suggest you run this as well if you haven't already
http://www.sevenforums.com/tutorials/433-disk-check.html < if necessary include the /f and /r in the command line as per Option2

just for another option you could run these they don't take long and will eliminate anything from that direction
http://www.superantispyware.com/
http://www.malwarebytes.org/products/malwarebytes_free/
http://www.bleepingcomputer.com/download/adwcleaner/
ADW download from bleeping computer delete any rubbish found with the malware scans
(NB If one is running Kaspersky security it may rant about ADW - just ignore it or disable Kaspersky while the ADW is being used)

http://www.sevenforums.com/windows-updates-activation/368372-windows-update-error-code-800736b3.html
Relevancy 56.76%

I have been stuck with this error for a bit and would like to get rid of the .NET 3.5.1 patch notices. CBS log attached for review.

Thanks for the help.

A:Windows Update: error 800736B3 with .NET 3.5.1 patch

Your CBS log did not come through:

http://www.sevenforums.com/windows-updates-activation/363882-windows-update-error-800736b3-net-3-5-1-patch.html
Relevancy 56.76%

Really struggling to fix Windows Vista update errors. There are 9 consistently failing important updates. I have followed all the scan and registry fix instructions but it seems to be making no difference.
Error number 800736B3 is shown then KB2803821. Please could someone help with a fix, I have attached the relevant screen shots and codes I think. (Added screen 1 and 2 showing better detail of the failed updates)
Thank you

A:Vista Update Error 800736B3 KB2803821

this forum is for windows 7 users, you will find the Vista forums here:
Vista Support Forums

http://www.sevenforums.com/windows-updates-activation/376315-vista-update-error-800736b3-kb2803821.html
Relevancy 56.76%

Hi, I've been receiving error code 800736b3 when trying to install 2 security updates and I don't know what the problem is.

A:Windows Update error code 800736b3

When this happens to me (just did - code 8007038) I install the updates one at a time.
Worked for me.

http://www.sevenforums.com/windows-updates-activation/334740-windows-update-error-code-800736b3.html
Relevancy 56.76%

Hi
You must get this a lot but I've tried every method mentioned before here.

I get this error when installing updates. Can someone guide me on how to troubleshoot it?

A:Windows Update Error Code 800736B3

What updates are you trying to install?

http://www.eightforums.com/windows-updates-activation/67057-windows-update-error-code-800736b3.html
Relevancy 56.76%

Hi,

i need help - my windows update doesn't work.

I put 2 cbs (CBS_1part and CBS_2part) - becouse log have 10MB after zip'ing.
(must unpack CBS_1part and CBS_2part to one folder after that unpack CBS.log)

file other.zip have another files from CBS folder.

A:Windows update Error 80243004 and 800736B3

What on earth did you use to split the Zip files? I've tried 3 different tools, and all tell me the files are corrupt.

Please just zip two/3 files together and upload them separately, then do another 2/3 files.

http://www.sevenforums.com/windows-updates-activation/371744-windows-update-error-80243004-800736b3.html
Relevancy 56.76%

i run Windows 7 Ult 64bit w/PS1. My comps been running great, installing updates perfectly till now.. I have read alot of posts on this and i have tried everything that people have posted as remedies, but nothing seems to work. I am hoping i dont have to re-install Windows again, cause i just did it a week ago.. any help on this would be greatly appreciated

Operating System - MS Windows 7 Ultimate 64-bit SP1

CPU - Intel Core 2 Quad Q6600 @ 2.40GHz 38 ?C
Kentsfield 65nm Technology

RAM - 6.00 GB Dual-Channel DDR2 @ 332MHz (5-5-5-15)

Motherboard - Dell Inc. 0TP406 (CPU)

Graphics - DELL SE198WFP (1440x900@60Hz)
1024MB GeForce GT 430 (nVidia) 36 ?C

Hard Drives - 313GB Seagate ST3320620AS (RAID) 37 ?C

Optical Drives - TSSTcorp DVD+-RW TS-H653B

Audio High - Definition Audio Device

A:Windows Update Error Code 800736B3

AS you have no replys, take a look at this link, do any of the methods in the accepted answer do anything for you.

Windows update fails to install updates with error code 800736B3 - Microsoft Answers

http://www.techsupportforum.com/forums/f217/windows-update-error-code-800736b3-606350.html
Relevancy 56.76%

Hi,
I have a problem with Windows Update. Firstly, i got windows update servise not running message. Then I was download the System Update Readiness Tool when i start that i get this error code 0x8007000d. Finally I tried update in windows update again i get this error code 800736B3.
I would greatly appreciate any help with this.

A:Windows Update, error code 800736B3

We also need the CheckSUR.log file created by running the CheckSUR/SURT tool - even if incomplete, it may give us some clues.


Your SFC scan identified the following problems -

Code:
Line 9296: 2014-06-06 13:33:15, Info CSI 00000244 [SR] Repairing 7 components
Line 9297: 2014-06-06 13:33:15, Info CSI 00000245 [SR] Beginning Verify and Repair transaction
Line 9298: 2014-06-06 13:33:15, Info CSI 00000246 [SR] Cannot repair member file [l:22{11}]"lsi_sas.sys" of lsi_sas.inf, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, file is missing
Line 9299: 2014-06-06 13:33:15, Info CSI 00000247 [SR] Cannot repair member file [l:20{10}]"lsi_fc.sys" of lsi_fc.inf, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, file is missing
Line 9300: 2014-06-06 13:33:16, Info CSI 00000248 [SR] Cannot repair member file [l:32{16}]"bthmigplugin.dll" of Microsoft-Windows-BTH-USER, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, file is missing
Line 9301: 2014-06-06 13:33:17, Info CSI 00000249 [SR] Cannot repair member file [l:102{51}]"Microsoft-Windows-IIS-HTTPLogging-Deployment-DL.man" of Microsoft-Windows-Migration-DownlevelManifests, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, file is missing
Line 9302: 2014-06-06 13:33:17, Info CSI 0000024a [SR] Cannot repair member file [l:76{38}]"MediaServer-Multicast-Migration-DL.man" of Microsoft-Windows-Migration-DownlevelManifests, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, file is missing
Line 9303: 2014-06-06 13:33:17, Info CSI 0000024b [SR] Cannot repair member file [l:100{50}]"Microsoft-Windows-IIS-IPSecurity-Deployment-DL.man" of Microsoft-Windows-Migration-DownlevelManifests, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, file is missing
Line 9304: 2014-06-06 13:33:17, Info CSI 0000024c [SR] Cannot repair member file [l:30{15}]"winlogon-DL.man" of Microsoft-Windows-Migration-DownlevelManifests, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, file is missing
Line 9305: 2014-06-06 13:33:17, Info CSI 0000024d [SR] Cannot repair member file [l:24{12}]"msdtcstp.dll" of Microsoft-Windows-Migration-DownlevelManifests, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, file is missing
Line 9306: 2014-06-06 13:33:17, Info CSI 0000024e [SR] Cannot repair member file [l:44{22}]"TabletPCJournal-DL.man" of Microsoft-Windows-Migra... Read more

http://www.sevenforums.com/windows-updates-activation/333896-windows-update-error-code-800736b3.html
Relevancy 56.76%

Hi,

Whenever I try to run windows update it seems to fail, the error code i get is 800736B3.

I have followed the instructions and ran the hotfix and sfc scan however the problem still persists.

I have attached the files that i can, however when compressing the CBS folder it totals to 196MB so its impossible to upload here.

Any help would be much appreciated!

Thanks,

Tim

A:Windows Update Error Code: 800736B3

Hi,

I have now added a drop box link to the CBS folder:

https://www.dropbox.com/s/f920qsjxup5g4hk/CBS.zip?dl=0

Thanks,

Tim

http://www.sevenforums.com/windows-updates-activation/377776-windows-update-error-code-800736b3.html
Relevancy 56.76%

Vista Update Error 800736B3 KB2803821 Really struggling to fix Windows Vista update errors. There are 9 consistently failing important updates (plus it looks like many others on the attachments named screen?). I have followed all the scan and registry fix instructions but it seems to be making no difference.
Error number 800736B3 is shown then KB2803821. Please could someone help with a fix, I have attached the relevant screen shots and codes I think. (Added screen 1 and 2 showing better detail of the failed updates)
Its driving me mad, always trying to update them!
Thank you

A:Vista Update Error 800736B3 KB2803821

Please, there must be someone who can build a patch for this?

http://www.vistax64.com/windows-updates/303952-vista-update-error-800736b3-kb2803821.html
Relevancy 55.9%

Hello,

I seem to be running into a popular issue with Windows Update- 800736B3. WU is not completely broken, as it's still able to install updates to Security Essentials and non-system software (IE11, Office). All system updates, however, are failing. I've ran SURT and SFC scan, but both didn't report any outright errors. The logs should be attached to this post in the .zip

Any help would be greatly appreciated! Thank you in advance!

A:Windows Update constant failures, Error 800736B3

There are no errors in CheckSUR or the SFC scan, and nothing significant in the background CBS data.

Please post your C:\Windows\windowsupdate.log file - it may tell us where the problem lies.

http://www.sevenforums.com/windows-updates-activation/334595-windows-update-constant-failures-error-800736b3.html
Relevancy 55.9%

I've been trying to solve this for a few months now but I haven't gotten anywhere. I've followed all the instructions here and they still continue to fail.

Windows Update Posting Instructions
I would really appreciate any insight as to what you think may be causing the issue, reformatting would really set me back since this computer has some industry specific CAD programs that are a pain to setup.

thanks again,Mark

For some reason I cant post an attachment &quot;attach button doesn't respond, in fact none of them do&quot;, I'll add a reply to the thread to see if I can then.

Update: Sorry about the missing attachments, I moved them out of the folder and forgot to attach, there are a couple of older CBS Persist files if you need them.

thanks

Mark

A:Window Update failing error code 800736B3

The error code 9C59 appeared when I tried to add Internet Explorer 11 to the update, prior to that it wasn't there.

http://www.sevenforums.com/windows-updates-activation/360726-window-update-failing-error-code-800736b3.html
Relevancy 55.9%

Hi.
I have a problem with Windows Update. It continues to fail with error code 800736B3. I have tried the update troubleshooter for Windows, I have ran scannow, I also have installed the update readiness tool and hotfix.
Still the updates fail.
I would greatly appreciate any help with this.

A:Window Update failing error code 800736B3

Please follow the Windows Update Posting Instructions and post the requested data

If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

http://www.sevenforums.com/windows-updates-activation/359540-window-update-failing-error-code-800736b3.html
Relevancy 55.9%

Hi.
I have a problem with Windows Update. It continues to fail with error code 800736B3. I have tried the update troubleshooter for Windows, I have ran scannow, I also have installed the update readiness tool and hotfix.
Still the updates fail.
I would greatly appreciate any help with this.
I have included the CBS flolder contents.
Thank you in advance for any insight!!!!!
Attachment 310809

Attachment 310811

Attachment 310812

Attachment 310813

Attachment 310814

Attachment 310815

Attachment 310819

Attachment 310820

Attachment 310821

A:Window Update failing error code 800736B3

CheckSUR shows this...

Code:
Unavailable repair files:
winsxs\manifests\msil_mscorlib.resources_b77a5c561934e089_6.1.7601.17648_en-us_6687c1de75c8e03a.manifest
winsxs\manifests\msil_mscorlib.resources_b77a5c561934e089_6.1.7601.21768_en-us_4fbc1bb28f6e72ee.manifest
I'll post a fix for it later - I have to get to work now

http://www.sevenforums.com/windows-updates-activation/325648-window-update-failing-error-code-800736b3.html
Relevancy 55.9%

I have been experiencing trouble with Windows Update for some time I have important updates that do no install correctly I have spent the better found: 80070005 / Windows 800736B3 - Update Error(s) portion of yesterday and today trying to figure out a couple of issues that I'v had and this is the only one remaining but I haven't been able to get it fixed I have tried the Windows Update Troubleshooter I have tried disabling security software I have tried System Update Readiness Tool for Windows for x -based Systems I have tried CMD sfc scannow did not find any integrity violations I have tried CMD CHKDSK C R as Windows Update - Error(s) found: 800736B3 / 80070005 well as Microsoft NET Framework Repair Tool I doubt this is important but just in Windows Update - Error(s) found: 800736B3 / 80070005 case I will note that days ago I cloned my Windows Update - Error(s) found: 800736B3 / 80070005 hard drive and am now running off of the new one However this issue existed long before the clone Error s found are- Code B Code The important updates are- Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Update for Windows for x -based Systems KB Update for Windows for x -based Systems KB Update for Windows for x -based Systems KB

A:Windows Update - Error(s) found: 800736B3 / 80070005

Try these:
 
For Code 800736B3: http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_update/windows-update-error-code-800736b3-failes-to/98573891-eead-4257-8bf2-1fbac3f2a96a
Skip the SFC step and System Readiness steps, and try the clean boot and safe mode options.
 
For Code 80070005: http://answers.microsoft.com/en-us/windows/forum/windows_other-windows_update/windows-update-error-code-80070005/3b00bcc8-f44a-4134-af68-e727605ad647
There are links to a number of troubleshooting steps and some automated fix-it tools.

http://www.bleepingcomputer.com/forums/t/538324/windows-update-errors-found-800736b3-80070005/
Relevancy 55.9%

Hi I have Windows bit Lenovo ideapad that is not allowing system updates and Windows 9C57 800736B3 codes update Error This has been going on for awhile I do some research on the problem and attempt to fix it myself When I am unsuccessful I become frustrated so then I don't try again for several months Meanwhile Windows update Error codes 800736B3 and 9C57 my computer performance is getting worse and worse What I've tried so far Windows updater troubleshooter Service registration missing or corrupt-FIXED Problems installing recent updates-FIXED Starting computer in clean boot to try to install updates Temporarily disabling antivirus software AVG Antivirus Free Edition and trying to run the updates I've downloaded and tried to run the SURT not sure if it actually DID run SFC scan did not find any integrity violations I was unable to upload CBS zip file to this thread I tried a few times Connection was reset I have not yet tried to restore the registry because I'm not confident on how to do it although I did backup my computer on an external hard drive Please let me know if you require any additional information Any insight advice or help would be greatly appreciated Thanks

A:Windows update Error codes 800736B3 and 9C57

Please follow the WindowsUpdate Posting Instructions and post the requested data



If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for anumber of reasons)



Please also post the C:\Windows\windowsudpate.log file

http://www.sevenforums.com/windows-updates-activation/374550-windows-update-error-codes-800736b3-9c57.html
Relevancy 55.47%

Hello I'm having a problem installing Windows Updates on my Windows Home Premium -bit PC - the update process ends with the error code B see attached screenshot I have tried following several suggested courses of action I obtained from several sources none of which has resolved the problem including Methods amp of Microsoft's Windows update error code B failes to install KB - Microsoft Community sfc scannow 800736B3 Update Code - 7 64-bit Error Home Windows Premium - gt no errors reported System Update Readiness Tool - gt downloaded installed successfully - no errors reported After running both of these restarted my PC and then tried to install the Windows updates again - no luck same Windows 7 Home Premium 64-bit Update - Error Code 800736B3 error reported So now I will see if anyone here can help me Thank-you very much in advance for any assistance you can provide Kevin p s the CBS zip file I created as per the Windows Update Posting Instructions was MB so too large to post There are several large cab files in that folder CbsPersist cab - can I exclude those from the zip file Edit Added CBS zip file with log files Windows 7 Home Premium 64-bit Update - Error Code 800736B3 only from C Windows Logs CBS folder

A:Windows 7 Home Premium 64-bit Update - Error Code 800736B3

I'm trying to figure out what exactly this error code means... it's not as easy to find like BSOD bugcheck codes, lol.

What updates failed exactly?

http://www.sevenforums.com/windows-updates-activation/364460-windows-7-home-premium-64-bit-update-error-code-800736b3.html
Relevancy 55.47%

Hi there,

I have a problem with Windows Update - it continually fails to install update KB2966583 (which is about 2.5MB) and brings up error code 800736B3. I have tried the update troubleshooter for Windows, the update readiness tool and hotfix.

Can anyone help me with this? Thanks in advance.

A:Windows Update KB2966583 fails, error code 800736B3

Please follow the Windows Update Posting Instructions and post the requested data
If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

http://www.sevenforums.com/windows-updates-activation/346121-windows-update-kb2966583-fails-error-code-800736b3.html
Relevancy 55.47%

Hi, I am having a problem with installing the English language pack on Windows 7 Ultimate SP1. It is now in Polish since I am polish and the edition I have is called Windows 7 Ingresso which is basicaly a cut down version of Win7 with some great programs preinstaled and is also really fast. The thing is I like doing youtube tutorials to some programs and things like that, but can't because Windows is in Polish...

I tried installing the English Language Pack through Windows Updates but it gives me an error code 800736B3

Anyone got any ideas?

Any help much appriciated thanks

A:Windows 7 SP1 - English Language Pack Installation Error : 800736B3

Hello baertekxx12,

Peruse the link below to see if it provides any useful information.






Quote:
Microsoft has no publicly available information for error code 800736B3.
Other threads in Answers forums very strongly suggest that error code 800736B3 is a symptom of system corruption/damage, most often caused by, e.g., one or more Norton realtime-protection processes, an infection, and/or injudicious use of "Registry cleaners" (e.g., Registry Mechanic; System Mechanic; RegCure; Advanced SystemCare; AVG PC TuneUp; PCTools Optimiser; CCleaner).


Error installing any language pack using windows update - Microsoft Answers

http://www.sevenforums.com/windows-updates-activation/194947-windows-7-sp1-english-language-pack-installation-error-800736b3.html
Relevancy 55.47%

When updating windows following errors occur:
800736B3
9C59

Already tried to
Fixit by microsoft
Option three on Windows Update - Reset

Didn't help: windows 7 still not updating.

Found this Window Update failing error code 800736B3. This solved one of my errors. But cannot find ewgaa.zip.

Will start with Windows Update Posting Instructions.

CBS: http://www.speedyshare.com/JSMVC/CBS.zip

Thanks for you help, Jan (Netherlands)

A:Multi error updating win 7 home 64bit: 800736B3 + 9C59

CBS zipped is 16 mb: to large to upload on this forum. You can find it here:

http://www.speedyshare.com/JSMVC/CBS.zip

http://www.sevenforums.com/windows-updates-activation/331198-multi-error-updating-win-7-home-64bit-800736b3-9c59.html
Relevancy 55.04%

Windows Professional x SP GB RAM Intel Core i GB free space on SSD Office Samsung Galaxy Note KIES Hi My Windows x PC has been working codes: failing 800736B3, Windows Error Update 80070246 with 8007371B, fine until recently The trouble started with attempting to use my Samsung Galaxy Note and sync using Samsung's Windows Update failing with Error codes: 8007371B, 800736B3, 80070246 KIES using a USB connection It was a bit glitchy but I finally got the thing to sync But today it didnt want to know Windows Update failing with Error codes: 8007371B, 800736B3, 80070246 and kept saying that my phone had quot No SIM card installed quot which is not true as the phone was picking up a mobile phone signal fine In Task Manager I discovered a thing called TrustedInstaller exe which is persistently taking up to of my processor I looked online and discovered that it was the correct size and that it was something to do with Windows Updates So ran Windows Update and discovered that it wanted to install about patches This is odd because I run Windows Update every or weeks Error code B Error code B But when I ran Windows Update two things failed So I executed a Restore Point to days ago and I ran Window Update again Same problem except that now there are THREE error codes Error code B Error code B Error code So this time I followed the windows error code links and although there was nothing describing my error codes I ran Microsoft FixIt and did Windows Update again Still the same problem So then I download ms System Update Readiness Tool for Win x - KB CLUE When I try to do the Windows Update it doest seem to even download anything and gets stuck at quot Downloading updates KB total complete quot I'm thinking that something is must be wrong if it thinks it needs to download quot KB quot - Any thoughts J

A:Windows Update failing with Error codes: 8007371B, 800736B3, 80070246

Please post the CheckSUR.log and CheckSUR.persist.log files as attachements to your reply.

http://www.sevenforums.com/windows-updates-activation/258141-windows-update-failing-error-codes-8007371b-800736b3-80070246-a.html
Relevancy 55.04%

Windows 7 SP1 Home Premium.
I am no longer getting any security updates because the update for Windows Update fails with Error Code 800736B3.

SFC /SCANNOW reports no errors.
C:\Windows\system32>sfc /scannow
Beginning system scan. This process will take some time.
Beginning verification phase of system scan.
Verification 100% complete.
Windows Resource Protection did not find any integrity violations.

I have attached the CBS folder without the CbsPersist.cab files.

I have already tried the Microsoft KB How to update the Windows Update Agent to the latest version

Attachment 333503

A:Windows Update Agent 7.6.7600.320 Fails - Error Code 800736B3

There's nothing apparently amiss in any of the uploaded files.
Please upload the CBSPersist files, and the C:\Windows\windowsupdate.log file

http://www.sevenforums.com/windows-updates-activation/345786-windows-update-agent-7-6-7600-320-fails-error-code-800736b3.html
Relevancy 55.04%

Hi chaps this is my first time posting here but have used this website for help in the past I can usually fix my own problems but with these I see there is not straight answer I hope someone can help as this has defeated me I'll try to provide all information in the instructions thread but if you need anything else please ask Really hope you guys can help Error codes B E amp Installed SURT http support microsoft com kb 80070103 8007065E, error update 800736B3, codes Constant failure, Ran sfc scannow Quote C Users Administrator gt sfc scannow Beginning system scan This process will take some time Beginning verification phase of system scan Verification complete Windows Resource Protection did not find any integrity violations Rebooted Ran sfc scannow again Quote C Users Administrator gt sfc scannow Beginning system scan This process will take some time Beginning verification phase of system scan Verification complete Windows Resource Protection did not find any integrity violations Retried updates - Failed with above error codes still At this point I collected logs but I'm still stumped

A:Constant update failure, error codes 800736B3, 8007065E, 80070103

The error codes all relate to registry problems.
There's no errors in the posted logs - please post a couple of the CBSPersist logs, and the C:\Windows\windowsupdate.log file.

Please also list the KB numbers involved.

http://www.sevenforums.com/windows-updates-activation/347622-constant-update-failure-error-codes-800736b3-8007065e-80070103-a.html
Relevancy 45.15%

Hello! At once I want to warn you that I make mistakes in my statements, but I do not know very well English and forums of my country I have not found anything that could to help me.
The problem is that I can not install more than twenty-five updates update. All they fail and it gives me ERROR 800736B3. I've seen on this forum topics where solved similar errors so I hope that finally someone help me fix this bug.
Here I put a file cbs.log recently after the sfc / scannow

CBS.txt

Please help!

http://www.sevenforums.com/windows-updates-activation/388355-800736b3.html
Relevancy 44.72%

Suddenly Windows 7 has stopped installing Windows Updates. It downloads, then creates restore point, starts installation, but then comes back with the error code 800F0900. This happens with all the updates when carried out individually, critical or optional. I first went through the process of clearing all the Start-up Programs in the Services section of msconfig. As that did not solve it I then stopped all but MS services, and that did not solve it.  I tried the Microsoft .NET Setup Verification Tool. This said there were problems that it could not fix and sent a report to Microsoft.  Following an earlier thread on this site, I installed and used the Windows Repair program from Tweeking.com. This failed to solve the problem. Does any one have any other possible advice to help solve this problem ?

A:Windows Updates will not install. Error code 800F0900 for all updates.

I would try running the System Update Readiness Tool:  http://www.microsoft.com/en-us/download/details.aspx?id=20858 .
 
Louis

http://www.bleepingcomputer.com/forums/t/597603/windows-updates-will-not-install-error-code-800f0900-for-all-updates/
Relevancy 44.29%

Hello all, I am posting for my father-in-law who is having difficulty with these windows updates.

The error code is 800736B3.

I downloaded and ran SURT a few times, each time it reported success however the error is still active and there are 10 updates pending on windows update.

i also scanned several times sfc /scannow and nothing exciting came up.

Uploading my CBS.zip continues to time out so here is a link to google drive with the file:
https://drive.google.com/file/d/0B7V...it?usp=sharing

Thanks in advance for your help.

A:Code 800736B3

Thought it was fixed but i have the same error code again!

http://www.sevenforums.com/windows-updates-activation/339073-code-800736b3.html
Relevancy 43.43%

I am trying to assist a friend in repairing their windows update problems. I've made progress- but I have 5 Important updates that refuse to install...

IE11 - 9C59
KB2937610 - 800736B3
KB2972211 - 800736B3
KB3032323 - 800736B3
KB2791765 - 800736B3

the SURT was run- and got most of the updates to work other than the ones shown above.
sfc /scannow said all files were fine.

SURT has been run 4 or so times- it's not shown any repairs after the first run... as I would expect.

I've looked through the log files, but I am not really sure what I am looking for to indicate what the problem is.

I have attempted to attach the CBS.Zip file but I got a 404 error each time I clicked "Upload". This must be due to the size of the file. Here is a onedrive link to the zip file.

A:Windows Update: 800736B3 and 9C59

The upload is 8 times larger than the forum's 8MB size limit on Zip/RAR files - which is why it wouldn't upload here

Your first run of CheckSUR had the following summary...





Quote:
Summary:
Seconds executed: 1046
Found 31 errors
CSI C Mark Deployment Missing Total count: 31


The next was clear of errors - how did you go about fixing the C Mark errors, since CheckSUR wasn't able to do it?

The CBS.log file shows the expected errors for the updates (apart from the IE one)
e.g.


Code:
2015-07-10 12:40:38, Info CBS Appl: Evaluating package applicability for package Package_2_for_KB2753842~31bf3856ad364e35~amd64~~6.1.2.0, applicable state: Installed
2015-07-10 12:40:38, Info CBS Plan: Package: Package_2_for_KB2753842~31bf3856ad364e35~amd64~~6.1.2.0, current: Installed, pending: Default, start: Installed, applicable: Installed, targeted: Installed, limit: Installed
2015-07-10 12:40:38, Error CSI 0000002c@2015/7/10:16:40:38.687 (F) d:\win7sp1_gdr\base\wcp\componentstore\csd_core.cpp(616): Error STATUS_SXS_ASSEMBLY_NOT_FOUND originated in function CCSDirect::GetDeploymentClosureStatus expression: (null)
[gle=0x80004005]
2015-07-10 12:40:38, Error CSI 0000002d (F) HRESULT_FROM_WIN32(ERROR_SXS_ASSEMBLY_NOT_FOUND) #630188# from Windows::ServicingAPI::CCSITransactionAnalysis_ICSIInventory::GetDeploymentInformation(flags = 0, class = ICSIINVENTORY_GET_DEPLOYMENT_INFORMATION_CLASS_CLOSURE (1), information = {dwFlags=00000000})
[gle=0x800736b3]
2015-07-10 12:40:38, Info CBS Failed to call GetDeploymentInformation on deployment: amd64_79cc1bf455dd56703d940a275924c112_31bf3856ad364e35_6.1.7601.22195_none_015b15d745c7b295 [HRESULT = 0x800736b3 - ERROR_SXS_ASSEMBLY_NOT_FOUND]
2015-07-10 12:40:38, Info CBS Failed to get component state. [HRESULT = 0x800736b3 - ERROR_SXS_ASSEMBLY_NOT_FOUND]
2015-07-10 12:40:38, Info CBS Failed to get current state of the deployment [HRESULT = 0x800736b3 - ERROR_SXS_ASSEMBLY_NOT_FOUND]
2015-07-10 12:40:38, Info CBS Failed to get Transaction State for package: Package_2_for_KB2753842~31bf3856ad364e35~amd64~~6.1.2.0, update: 2753842-3_neutral_LDR [HRESULT = 0x800736b3 - ERROR_SXS_ASSEMBLY_NOT_FOUND]
2015-07-10 12:40:38, Info CBS Failed to get current state. [HRESULT = 0x800736b3 - ERROR_SXS_ASSEMBLY_NOT_FOUND]
2015-07-10 12:40:38, Info CBS Failed to populate updates for package: Package_2_for_KB2753842~31bf3856ad364e35~amd64~~6.1.2.0 [HRESULT = 0x800736b3 - ERROR_SXS_ASSEMBLY_NOT_FOUND]
2015-07-10 12:40:38, Info CBS Failed to add package to execution for package:Package_2_for_KB2753842~31bf3856ad364e35~amd64~~6.1.2.0 [HRESULT = 0x800736b3 - ERROR_SXS_ASSEMBLY_NOT_FOUND]
2015-07-10 12:40:38, Info CBS Failed to process component watch list. [HRESULT = 0x800736b3 - ERROR_SXS_ASSEMBLY_NOT_FOUND]
2015-07-10 12:40:38, Info CSI 0000002e@2015/7/10:16:40:38.762 CSI Transaction @0x116ada0 destroyed
2015-07-10 12:40:38, Info CBS Perf: InstallUninstallChain complete.
This looks to me as if the install is actually stuck in a pending state, and you need to roll it back...


This is the command to run when booted offline at a Repair Environment command prompt

dism.exe /image:C:\ /cleanup-image /revertpendingactions

This is supposed to revert all pended updates, and hopefully allow the system to start again - assuming it works, do another Check for Updates before attempting to install the updates again.

http://www.sevenforums.com/windows-updates-activation/375172-windows-update-800736b3-9c59.html
Relevancy 43.43%

As title. Im using W7 64-bit version and its a cumulative security update for IE8.
Microsoft charges me to try and email my issues, so id thought id try here first.

what should i do to solve this problem? I have disabled my Kaspersky and no change. I have also downloaded it manually and it just says it cant be installed.

A:trying to use update KB980182 gives code 800736B3?!?!?!

Is Windows Defender on? See if disabling it in 'services' helps.

http://www.sevenforums.com/windows-updates-activation/76089-trying-use-update-kb980182-gives-code-800736b3.html
Relevancy 43%

Windows 7 Fail to Update: Code 800736B3 - Getting error on update CBS

A:Windows 7 Fail to Update: Code 800736B3

The SFC log seems incomplete, please run SFC /SCANNOW again
Windows Update Posting Instructions

Step 4 asks you to copy the CBS folder to your desktop and put it in a zip folder.
Upload the zip folder when you post again.

If the zip folder is too big for the forum, upload just the CBS.log from the CBS folder copy on your Desktop.
Please add your SF Systems Specs by following this tutorial: System Info - See Your System SpecsIn the System Manufacturer/Model Number field, manually type Desktop or Laptop adding it to the information already in the field.
Specify Custom Build as the manufacturer if it is not an OEM machine.
The tool does not fill in this information but it is very important if someone has to research drivers or hardware for your machine.
Log on to Sevenforums (SF) and let the tool fill in you System specs on your SF profile.

Full instructions are in the tutorial. It's a simple process and it makes that information readily available on your posts. You don't have to retype the information in any thread.

Click here to view your system specs on SevenForums.

Click on My System Specs in the lower left of any post by any member to see what is presented about their machine.

Thanks

http://www.sevenforums.com/windows-updates-activation/338201-windows-7-fail-update-code-800736b3.html
Relevancy 42.14%

Hi,

I tried a lot of things trying to resolve this issue but nothing worked.
I finally follow the procedure described on this forum, in the hope someone here can help.

I activated the Administrateur account (my system is in French) and ran the CheckSUR and Windows Update from this account as otherwise I can't access the CBS log file.
I joined the requested files,
Thank you by advance.
Alain

A:Windows 7/64 Home Premium Update errors 9C59 & 800736B3

Your SFC scan was clear - but the background CBS data shows some severe problems.
PLease run the CheckSUR tool, and post the results...

Please download and save the CheckSUR tool from http://support.microsoft.com/kb/947821
(you'll need to look in the details for Windows 7, downloading from the Microsoft Download Center)

Run it - The tool can take anywhere from 5 mins to a couple of hours to run (or 'Install') depending on how much it has to do, and may exit silently - it may appear to freeze for most of that time, but be patient.
The result is logged in the C:\Windows\Logs\CBS\CheckSUR.log file - and an archive …\checksur.persist.log file

Then zip the CheckSUR.log and upload it to your reply.

http://www.sevenforums.com/windows-updates-activation/367124-windows-7-64-home-premium-update-errors-9c59-800736b3.html
Relevancy 39.99%

Hi I have been having some recurring problems with the attempts to install some automatic windows updates Security Update for Microsoft Office Acess Security Update for Microsoft Office Outlook Junk Email Filter I am not able to install these updates maybe any other updates in general After attempting the install the following install window says quot Windows Update encountered an unknown Code 80070643, Windows error, Update 7 install Error can't updates. error quot Next to it an error code Microsoft Error Code 80070643, Windows 7 Update error, can't install updates. provides a solution to the problem by re-installing Microsoft NET Framework They also provide a link to the program NET Framework cleanup Error Code 80070643, Windows 7 Update error, can't install updates. tool that enables you to uninstall NET Framework and it s components I followed Microsoft s instructions to solve Error Code 80070643, Windows 7 Update error, can't install updates. the issue though I ve been put at a standstill I have used the NET Framework Cleanup tool to uninstall NET Framework and it s components states that it uninstalls all versions SP Then afterwards instructed to reinstall NET Framework specifically in an order then then SP I start with then as the installation starts it says that to contiunue installation I must turn off or on windows features in the Control Panel I do so and turn off all Windows features Then continue and it again states to turn off features in the Control Panel I wasn t able to continue the process and I am also concerned that this is the same error that made me unable to install Microsoft Security Essentials as this is the same error and I am sure that something is wrong with my version of NET Framework Please help me resolve this issue it s been pissing me off nbsp

A:Error Code 80070643, Windows 7 Update error, can't install updates.

Hello?
Waiting for a day no one seems to be replying.
 

https://forums.techguy.org/threads/error-code-80070643-windows-7-update-error-cant-install-updates.939844/
Relevancy 39.56%

i just installed google chrome from online installer and then i moved the file using application mover to the HDD.. then i pasted a symlink in "C:\Program Files (x86)\" ... "C:\" is the SSD where the windows and the drivers are installed.... when i turn on chrome everything works file.. but the updater doesn't work... when i try to update i get this:



can anyone help me get that fixed.. thanks!

A:Update failed (error: 3)An error occurred while checking for updates:

Just uninstall Chrome then install it directly to the destination you want it installed instead of moving it post installation.

http://www.sevenforums.com/general-discussion/346220-update-failed-error-3-error-occurred-while-checking-updates.html
Relevancy 39.56%

hi..laptop couldn't find my cam ..I tried to run the system restore but an error occurs.i ran the window updates and these are the error codes found..CODE 80070643 Error Code 80071A91..please help me..I already ran the Adware cleaner,Superanti and Malware..please help me..thank you so muchTech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i5-2430M CPU @ 2.40GHz, Intel64 Family 6 Model 42 Stepping 7
Processor Count: 4
RAM: 3936 Mb
Graphics Card: NVIDIA GeForce GT 520M, 1024 Mb
Hard Drives: C: Total - 459837 MB, Free - 327101 MB;
Motherboard: Acer, Aspire 4752
Antivirus: avast! Antivirus, Updated and Enabled
 

A:Solved: system recovery error,updates error and cam not found

good day..i had Windows 7 reinstalled ..that took care of the problems..thanks
 

https://forums.techguy.org/threads/solved-system-recovery-error-updates-error-and-cam-not-found.1128008/
Relevancy 38.7%

I'm working on my sister in-laws dell inspiron 1500 laptop and the first batch of updates installed but there were 64 updates that wouldn't install and this error came up 800700cb error.

Also, I've tried going into the registry and removing unnecessary programs from startup and get this error "the system could not find the environment option that was entered." This happens for almost anything thats opened. I couldn't even install firefox because this error came up.

Some answers would be very helpful, thank you.
 

A:Updates error and system environment error

Time for a factory recovery I think.
 

https://forums.techguy.org/threads/updates-error-and-system-environment-error.1007669/
Relevancy 38.7%

I'm working on my sister in-laws dell inspiron 1500 laptop and none of the updates will install. I get an 800700cb error.

Also, I've tried going into the registry and removing unnecessary programs from startup and get this error "the system could not find the environment option that was entered." This happens for almost anything thats opened. I couldn't even install firefox because this error came up.

Some answers would be very helpful, thank you.

http://www.techsupportforum.com/forums/f217/updates-error-and-system-environment-error-587800.html
Relevancy 38.27%

I recently noticed that the system was trying to do updates every day at closedown and found that update was giving a return code of b I have run SURT several times and it doesn't seem to give any code giving return Windows giving restores x00000022 update 800736b3; results or should I be looking somewhere else I ran sfc scannow and extracted the results and they are in sfcdetails txt Windows update giving return code 800736b3; restores giving x00000022 attached SFC Windows update giving return code 800736b3; restores giving x00000022 said there were some files it couldn't fix even though sfcdetails txt says it has fixed all of them CBS zip is much too big to upload using the paperclip - is there another way I tried restoring to an earlier restore point and unfortunately all the attempted updates have flushed my list of restore points - and the oldest few all give me a return code of x Not sure if this is one problem or two I am reluctant to do a System Recovery as it sounds pretty drastic - help would be much appreciated PS Is any more info required

A:Windows update giving return code 800736b3; restores giving x00000022

The only errors in SFC are these...

Code:
2015-06-14 21:41:16, Info CSI 000005e7 [SR] Repairing 1 components
2015-06-14 21:41:16, Info CSI 000005e8 [SR] Beginning Verify and Repair transaction
2015-06-14 21:41:16, Info CSI 000005ea [SR] Cannot repair member file [l:24{12}]"utc.app.json" of Microsoft-Windows-Unified-Telemetry-Client, Version = 6.1.7601.18839, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2015-06-14 21:41:16, Info CSI 000005ec [SR] Cannot repair member file [l:66{33}]"telemetry.ASM-WindowsDefault.json" of Microsoft-Windows-Unified-Telemetry-Client, Version = 6.1.7601.18839, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
...which are caused by an MS update which they messed up the file-coding on and may get around to fixing sometime.
It's not critical, but you could get rid of it by uninstalling KB3022345 and/or KB3068708 and hiding the latter when it reappers in your offered updates list.

Please post the C:\Windows\Logs\CBS\CheckSUR.log and C:\Windows\Logs\CheckSUR.Persist.log files.

http://www.sevenforums.com/windows-updates-activation/372918-windows-update-giving-return-code-800736b3-restores-giving-x00000022.html
Relevancy 36.55%

xp pro
Error number: 0x80244001
says cannot load requested page
don't remember deleting anything recently that would affect updates.
help
 

Relevancy 36.12%

Hi I recently started getting an error immediately after startup and it repeats itself over and over Error Signature EventType InPageError P c c P C DOCUME CHRISA LOCALS Temp WER e dir wuauclt exe mdmp C DOCUME CHRISA LOCALS Temp WER e dir appcompat txt appcompat txt reads lt Automatic Error Updates xml version quot quot encoding quot UTF- quot gt lt DATABASE gt lt EXE NAME quot SYSTEM INFO quot FILTER quot GRABMI FILTER SYSTEM quot gt lt MATCHING FILE NAME quot advapi dll quot SIZE quot Automatic Updates Error quot CHECKSUM quot x E BCF quot BIN FILE VERSION quot quot BIN PRODUCT VERSION quot quot PRODUCT VERSION quot quot FILE DESCRIPTION quot Advanced Windows Base API Automatic Updates Error quot COMPANY NAME quot Microsoft Corporation quot PRODUCT NAME quot Microsoft Windows Automatic Updates Error Operating System quot FILE VERSION quot xpsp sp rtm - quot ORIGINAL FILENAME quot advapi dll quot INTERNAL NAME quot advapi dll quot LEGAL COPYRIGHT quot Microsoft Corporation All rights reserved quot VERFILEDATEHI quot x quot VERFILEDATELO quot x quot VERFILEOS quot x quot VERFILETYPE quot x quot MODULE TYPE quot WIN quot PE CHECKSUM quot xA DE quot LINKER VERSION quot x quot UPTO BIN FILE VERSION quot quot UPTO BIN PRODUCT VERSION quot quot LINK DATE quot quot UPTO LINK DATE quot quot VER LANGUAGE quot English United States x quot gt lt MATCHING FILE NAME quot gdi dll quot SIZE quot quot CHECKSUM quot xA EEC E quot BIN FILE VERSION quot quot BIN PRODUCT VERSION quot quot PRODUCT VERSION quot quot FILE DESCRIPTION quot GDI Client DLL quot COMPANY NAME quot Microsoft Corporation quot PRODUCT NAME quot Microsoft Windows Operating System quot FILE VERSION quot xpsp sp rtm - quot ORIGINAL FILENAME quot gdi quot INTERNAL NAME quot gdi quot LEGAL COPYRIGHT quot Microsoft Corporation All rights reserved quot VERFILEDATEHI quot x quot VERFILEDATELO quot x quot VERFILEOS quot x quot VERFILETYPE quot x quot MODULE TYPE quot WIN quot PE CHECKSUM quot x B quot LINKER VERSION quot x quot UPTO BIN FILE VERSION quot quot UPTO BIN PRODUCT VERSION quot quot LINK DATE quot quot UPTO LINK DATE quot quot VER LANGUAGE quot English United States x quot gt lt MATCHING FILE NAME quot kernel dll quot SIZE quot quot CHECKSUM quot x CE quot BIN FILE VERSION quot quot BIN PRODUCT VERSION quot quot PRODUCT VERSION quot quot FILE DESCRIPTION quot Windows NT BASE API Client DLL quot COMPANY NAME quot Microsoft Corporation quot PRODUCT NAME quot Microsoft Windows Operating System quot FILE VERSION quot xpsp sp rtm - quot ORIGINAL FILENAME quot kernel quot INTERNAL NAME quot kernel quot LEGAL COPYRIGHT quot Microsoft Corporation All rights reserved quot VERFILEDATEHI quot x quot VERFILEDATELO quot x quot VERFILEOS quot x quot VERFILETYPE quot x quot MODULE TYPE quot WIN quot PE CHECKSUM quot xFF quot LINKER VERSION quot x quot UPTO BIN FILE VERSION quot quot UPTO BIN PRODUCT VERSION quot quot LINK DATE quot quot UPTO LINK DATE quot quot VER LANGUAGE quot English United States x quot gt lt MATCHING FILE NAME quot ntdll dll quot SIZE quot quot CHECKSUM quot x D quot BIN FILE VERSION quot quot BIN PRODUCT VERSION quot quot PRODUCT VERSION quot quot FILE DESCRIPTION quot NT Layer DLL quot COMPANY NAME quot Microsoft Corporation quot PRODUCT NAME quot Microsoft Windows Operating System quot FILE VERSION quot xpsp sp rtm - quot ORIGINAL FILENAME quot ntdll dll quot INTERNAL NAME quot ntdll dll quot LEGAL COPYRIGHT quot Microsoft Corporation All rights reserved quot VERFILEDATEHI quot x quot VERFILEDATELO quot x quot VERFILEOS quot x quot VERFILETYPE quot x quot MODULE TYPE quot WIN quot PE CHECKSUM quot xAF F quot LINKER VERSION quot x quot UPTO BIN FILE VERSION quot quot UPTO BIN PRODUCT VERSION quot quot LINK DATE quot quot UPTO LINK DATE quot quot VER LANGUAGE quot English United States x quot gt lt MATCHING FILE NAME quot ole dll quot SIZE quot quot CHECKSUM quot xA DCAB quot BIN FILE VERSION quot quot BIN PRODUCT VERSION quot quot PRODUCT VERSION quot quot FILE... Read more

Relevancy 36.12%

Hi !!
Whenever I'm checking for any updates (vaio care or ATI) a pop up window appears "Internet explorer has stopped working". And error reporting fails. The process linked with it is werFault.exe. I don't know what to do. Even ending the task through task manager does not help. It keeps on popping.

A:Error in checking for updates

Take a look at the info (don't download anything) at http://www.exe-error-fixes.com/enable-disable-werfaultexe/ .

Louis

http://www.bleepingcomputer.com/forums/t/393990/error-in-checking-for-updates/
Relevancy 36.12%

Hey Automatic Updates Error. guys Im new here and thought this would be a great place to post my problem I got a new laptop a few Automatic Updates Error. weeks ago and only recently windows updates stopped working Everything else is working fine but I keep having this problem I try and update and it gives me this error UPDATES WERE UNABLE TO BE SUCCESSFULLY INSTALLED The following updates were not installed Update for Automatic Updates Error. Windows XP KB Microsoft Windows Installer After checking C WINDOWS WindowsUpdate log it says - - b Misc Logging initialized build tz - - - b Misc Process C WINDOWS system wuauclt exe - - b Misc Module C WINDOWS system wuaueng dll - - b Handler - - b Handler START Handler Windows Patch Install - - b Handler - - b Handler Updates to install - - b Handler Installing update AE C D - CA- - FD -D DF AB FCD - - bd Handler Installing with parameters -q -z -er sandbox C WINDOWS SoftwareDistribution Download ad a aeee d a - - bd Handler Updateci OpenFileForScan C WINDOWS SoftwareDistribution Download ad a aeee d a update update exe failed - - bd Handler Updateci WinSEUpdateHandler LaunchInstaller Failed opening C WINDOWS SoftwareDistribution Download ad a aeee d a update update exe - - bd Handler Install completed with x - - b Handler FATAL UH x InstallOrUninstallThread failed - - b Handler WARNING Install completed result type x installer error True error x disabled until reboot No reboot required No - - b Handler FATAL UH x b HandleSingleUpdate failed - - b Handler - - b Handler END Handler Windows Patch Install - - b Handler - - c Handler - - c Handler START Handler Windows Patch Install - - c Handler - - c Handler Updates to install - - c Handler Installing update F FCA BF- AD- A- C- CE - - c Handler Installing with parameters norestart quiet -er sandbox C WINDOWS SoftwareDistribution Download ad c c a f b a a c d - - c Handler Updateci OpenFileForScan C WINDOWS SoftwareDistribution Download ad c c a f b a a c d update update exe failed - - c Handler Updateci WinSEUpdateHandler LaunchInstaller Failed opening C WINDOWS SoftwareDistribution Download ad c c a f b a a c d update update exe - - c Handler Install completed with x - - c Handler FATAL UH x InstallOrUninstallThread failed - - c Handler WARNING Install completed result type x installer error True error x disabled until reboot No reboot required No - - c Handler FATAL UH x b HandleSingleUpdate failed - - c Handler - - c Handler END Handler Windows Patch Install - - c Handler After checking C WINDOWS SoftwareDistribution Download ad a aeee d a update I can see update exe is not there Any help is much appreciated thanks

Relevancy 36.12%

Good afternoon. As a new member and a beginner with this Computer lark, I hope I am going about this in the right manner. On the 13 Aug on checking for updates I noted there were three.Try as I might I was unable to download them. Each time I attempted to download I received the following: !!!bad checksum! Could you please help me with this. Thankyou.
 

Relevancy 36.12%

I have not been getting any automatic updates since 8/9/09 is that normal ?
and when i try to get updates manualy i get the error message 0X8DDD0002
and wont allow me can someone help please. I am running vista premium sp2
and Internet Explorer 8

http://www.techsupportforum.com/forums/f217/error-0x8ddd0002-in-updates-414612.html
Relevancy 36.12%

I keep getting a Windows Security Alert Balloon saying that my Automatic Updates is turned off However in the Control Panel gt Automatic Updates it Automatic error Off? & .dll Updates says that it is turned ON One more thing-- When I start windows I get an error saying Error loading C WINDOWS Dziwamujumu dll The specified module could not be found Error loading C WINDOWS iputegixiv dll The specified module could not be found Please help Thanks Logfile of Trend Micro HijackThis v Scan saved at PM on Platform Windows XP SP WinNT MSIE Internet Explorer v Boot mode Normal Running processes C WINDOWS System smss exe Automatic Updates Off? & .dll error C WINDOWS system winlogon exe C WINDOWS system services exe C WINDOWS system lsass exe C WINDOWS system Ati evxx exe C WINDOWS system svchost exe C WINDOWS System svchost exe C WINDOWS system svchost exe C WINDOWS system Ati evxx exe C Program Files Lavasoft Ad-Aware aawservice exe C WINDOWS Explorer EXE C WINDOWS system spoolsv exe C Program Files Intel Intel Application Accelerator iaanotif exe C Program Files Common Files AOL TopSpeed aoltsmon exe C WINDOWS system dla tfswctrl exe C Program Files Common Files Apple Mobile Device Support bin AppleMobileDeviceService exe C Program Files Common Files Sonic Update Manager sgtray exe C PROGRA AVG AVG avgwdsvc exe C WINDOWS system Rundll exe C Program Files Bonjour mDNSResponder exe C WINDOWS system drivers CDAC BA EXE C WINDOWS System CTsvcCDA EXE C WINDOWS System spool DRIVERS W X E FATI FA EXE C Program Files Viewpoint Viewpoint Manager ViewMgr exe C Program Files Dell Media Experience PCMService exe C Program Files Common Files Real Update OB realsched exe C WINDOWS system gearsec exe C Program Files Intel Intel Application Accelerator iaantmon exe C PROGRA Verizon SMARTB MotiveSB exe C Program Files Java jre bin jusched exe C Program Files Java jre bin jqs exe C PROGRA AVG AVG avgtray exe C WINDOWS system ctfmon exe C Program Files RocketDock RocketDock exe C WINDOWS system PSIService exe C PROGRA AVG AVG avgrsx exe C WINDOWS System snmp exe C WINDOWS System svchost exe C WINDOWS system Tablet exe C Program Files Viewpoint Common ViewpointService exe C WINDOWS wanmpsvc exe C WINDOWS System MsPMSPSv exe C PROGRA AVG AVG avgemc exe C WINDOWS system NOTEPAD EXE C WINDOWS system wscntfy exe C Program Files Trend Micro HijackThis HijackThis exe R - HKCU Software Microsoft Internet Explorer Main Start Page http www ask com o R - HKLM Software Microsoft Internet Explorer Main Default Page URL http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Main Default Search URL http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Main Search Page http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Main Start Page http go microsoft com fwlink LinkId R - HKCU Software Microsoft Internet Explorer Main First Home Page http go microsoft com fwlink LinkId R - HKCU Software Microsoft Windows CurrentVersion Internet Settings ProxyOverride local R - URLSearchHook no name - D F - C - A - E - AF F - no file R - URLSearchHook Yahoo Toolbar - EF BD -C FB- D - F- D F - no file O - Toolbar EPSON Web-To-Page - EE D F- B- - D-C B AAEBA D - C Program Files EPSON EPSON Web-To-Page EPSON Web-To-Page dll O - Toolbar Veoh Browser Plug-in - D - - -A B -AEFAF AB - C Program Files Veoh Networks Veoh Plugins reg VeohToolbar dll O - HKLM Run IAAnotif C Program Files Intel Intel Application Accelerator iaanotif exe O - HKLM Run dla C WINDOWS system dla tfswctrl exe O - HKLM Run UpdateManager quot C Program Files Common Files Sonic Update Manager sgtray exe quot r O - HKLM Run P Helper Rundll P dll P Helper O - HKLM Run UpdReg C WINDOWS UpdReg EXE O - HKLM Run EPSON Stylus Photo R Series C WINDOWS System spool DRIVERS W X E FATI FA EXE P quot EPSON Stylus Photo R Series quot O quot USB quot M quot Stylus Photo R quot O - HKLM Run ViewMgr C Program Files Viewpoint Viewpoint Manager Vi... Read more

https://forums.techguy.org/threads/automatic-updates-off-dll-error.779234/
Relevancy 36.12%

Ok so i've gone through this so many times now and search Google over and over again, did things that other people have tried and none have had any success.
I have 7 important and 5 optional and none of the important ever complete.
As the title says errors are code 57a and code 643
so if anyone could explain in step by step what i can do to fix this and complete the install i would be much appreciated.
I've tried so many things i can't really remember what exactly i've done so i'l just try whatever goes up and then see if it works.

A:Failed updates error 57a and 643

Welcome
Perhaps this MS article will help
When you try to install an update for the .NET Framework 1.0, 1.1, 2.0, 3.0, or 3.5, you may receive Windows Update error code &#34;0x643&#34; or Windows Installer error code &#34;1603&#34;

http://www.vistax64.com/windows-updates/290052-failed-updates-error-57a-643-a.html
Relevancy 36.12%

when i attempt to run MS updates I get the following error msg : ox800c0005
will not permit downloads...
operating system is windowns xp

any advice would b appreciated,

thanks
 

A:error msg when attempting to run ms updates

Try this for starters

Click on start | run
Type in cmd and click OK
In the command prompt, type the following command
and press enter.

REGSVR32 SOFTPUB.DLL

Repeat the above replacing the REGSVR32 SOFTPUB.DLL with each of the following

REGSVR32 WINTRUST.DLL

REGSVR32 INITPKI.DLL
 

https://forums.techguy.org/threads/error-msg-when-attempting-to-run-ms-updates.234335/
Relevancy 36.12%

This is the error when trying to install latest w2k updates but not sure what to do.
 

Relevancy 36.12%

Attached DXDIAG report, but havent had updates since October ??, and get the following error 80070490

A:No Updates get error 80070490

Sometimes turn off your AV software firewall, and turn on Windows Firewall then update. then go back and put on AV firewall.

http://www.techsupportforum.com/forums/f217/no-updates-get-error-80070490-a-199710.html
Relevancy 36.12%

When I try to update the "Microsoft.Net Framework 1.1 Service Pack 1 Security Update for Windows 2000, Windows XP, Windows Vista, Windows Server 2008, Windows 7, and Windows Server 2008 R2 (KB953297)" it tells me it failed to update with "Code 643". Can anyone help?
 

A:Vista Updates Error

Hi there is some info in the posts here which may be of help
http://www.vistax64.com/vista-performance-maintenance/78698-error-code-643-a.html
 

https://forums.techguy.org/threads/vista-updates-error.897421/
Relevancy 36.12%

I really need help with the updates on this computer. It says I have like 44 updates on the computer and I really don't know why it keeps coming up with error message and codes every time so I am doing each update 1 by 1 and some are going through
and others are still error messages most are related to office 13 application and security for apps. can someone please tell me how to make the computer faster and update without errors.?

https://social.technet.microsoft.com/Forums/en-US/f16b9dfd-4248-4c15-bb73-bda6d5e7de41/updates-and-error-codes?forum=w7itprovirt
Relevancy 36.12%

So I get the nag icon to install 'critical updates.'

When I install 'em, I get this. Now what?

A:Trying to install updates; get error msg?

What if you tried installing the security update for Works first?
Also, can you disable virus scanner and any programs running?

http://www.vistax64.com/general-discussion/255145-trying-install-updates-get-error-msg.html
Relevancy 36.12%

I have recently had a issue with opening Automatic Updates I have spent all day trying to fix it with no success so I was hoping making a post here might help The problem is every time I try with Automatic Updates Error to open anything that has to do with Automatic Updates a window pops up saying quot The application failed to initialize properly xc Click OK to terminate the application quot Error with Automatic Updates And anytime I try and do a Windows Update via windows com I get a different error saying quot Error number x DDD The site cannot continue because one or more of these Windows services is not running Automatic Updates allows the site to find download and install high-priority updates for your computer Background Intelligent Transfer Service BITS helps updates download more quickly and without problems if the download process is interrupted Event Log keeps a record of updating activities to help with troubleshooting if needed To make sure these services are running Click Start and then click Run Type services msc and then click OK In the list of services double-click on Automatic Updates and then click Properties In the Startup type list select Automatic and click Apply Verify that the Service status is started if the Service Status is Stopped click on the Start Button In Error with Automatic Updates the list of services double-click on Background Intelligent Transfer Service BITS and then click Properties In the Startup type list select Manual and click Apply Verify that the Service status is started If the Service Status is Stopped click on the Start Button In the list of services double-click on Event Log and then click Properties In the Startup type list select Automatic and click Apply Verify that the Service status is started If the Service Status is Stopped click on the Start Button quot If I could get some assistance on how to fix these errors I would be very grateful because I can t update my computer without these Thanks nbsp

A:Error with Automatic Updates

The problem is every time I try to open anything that has to do with Automatic Updates, a window pops up saying "The application failed to initialize properly (0xc0000005). Click OK to terminate the application."Click to expand...

Try This link it will tell you what the problem is. this refers to the first error code.
http://www.updatexp.com/0xC0000005.html

For error code #2 go here http://support.microsoft.com/kb/910337
 

http://www.techspot.com/community/topics/error-with-automatic-updates.109633/
Relevancy 36.12%

I am getting an error installing an update for NetFramework 2.0. I already have 1.1 and the SP for 1.1 installed.

Is there a known problem with 2.0?

Since it is already downloaded on my PC, where can I find it to delete the update and then I'll run it again.

A:Error with Automatic Updates

Try uninstalling it and reinstalling it through win update.

If it's not listed in add or remove programs, then this suggestion is useless.

http://www.techsupportforum.com/forums/f10/error-with-automatic-updates-109366.html
Relevancy 36.12%

I have research hundreds of would be solutions for this issue and scoured so many forums for weeks and weeks I m dazed by it all A sensible answer not involving MS Fitit which doesn t work for me various rootkillers which don t work for me and antivirus updates ERROR VISTA with turn off turn on again advice which don t work for me would be appreciated Here s the thing I ve a vista dell used strictly for photos music ERROR with VISTA updates and the odd internet search It s been ERROR with VISTA updates fine since when I got it -happily updating now and again keeping up nicely with the changes in OS IE Chrome all of that Internet access got busier as the kids started to use it Set up with their own accounts they ve been fine It then started to get very slow until time-out messages started up in any browser I did EVERYTHING to investigate the issue until finally out of desperation I wiped it and did a factory reboot Sure enough it s just the same - surely it s something with the router internet connection external traffic right Nope - everything else in the house works perfectly fine - I don t know what else to do and I m close to smashing it up with a hammer which is what happened to the last one in Vista Home Premium SP AMD Athlon x x gb MS security essentials EI nothing else loaded on a virgin install MS updates STOP after SP Any ideas Thanks nbsp

A:ERROR with VISTA updates

Please use the TSG System Info tool to let Tech's know the specs of your computer: http://static.techguy.org/download/SysInfo.exe
What type of Dell computer do you have? A seven year old computer could be slow due to a hard drive going or a power supply failing. When was the last time you did a Check disk for errors?
 

https://forums.techguy.org/threads/error-with-vista-updates.1055670/
Relevancy 36.12%

I am getting this message when I try to download updates (automatic). "Cumulative Update for Windows 10 Version 1511 for x64-based Systems (KB3140768) - Error 0x80240017 Security Update for Adobe Flash Player for Windows 10 Version 1511 for x64-based Systems (KB3135782) - Error 0x80240017" How can I remedy this?  Same error # in both.  Thanks. Marie










Solved!
View Solution.

A:updates for hp Win 10 and error messages ( I am using a Can...

Hi @mcr308, Glad to hear that the problem is solved. Have a good day! 

http://h30434.www3.hp.com/t5/Notebook-Software-and-How-To-Questions/updates-for-hp-Win-10-and-error-messages-I-am-using-a-Canon/td-p/5592427
Relevancy 36.12%

Hey guys,

For over a month, I've been trying to fix my Windows Update that always shows the 800B0100 error. I've done all the things that I could, including the System Readiness Tool and all of the other things to no avail. Could someone help me out a bit? Thanks.

A:Error 800B0100 on 4 Updates

Lets start with this. Please perform the following:

1. Download and save this tool to your desktop:
http://go.microsoft.com/fwlink/?linkid=52012

2. Run the tool, and then click 'Copy' - ignore any errors if they appear

3. Use CTRL+V to paste the unedited results of the validation tool here in your next reply

Windows Genuine and Activation Issue Posting Instructions

Regards,
Golden

http://www.sevenforums.com/windows-updates-activation/264878-error-800b0100-4-updates.html
Relevancy 36.12%

Windows is unable to install latest KB2532531, KB2533623, KB2555917 error configuring...reboots and then keeps asking again and again because of auto update. please help!

Relevancy 36.12%

I got this error today after the windows updates. this is my first time to have any issues with the updates.

I'm not that familiar with win 7 updates so please give me the instructions to follow. Like where to find a certain area if I had to delete something. It's a new computer and I haven't had any issues yet so I haven't had to locate certain 'working areas' to fix stuff like I had to do with win xp.

Can someone help me ASAP?

A:After updates - this error message

these are the updates left to do. Do I install all of these?

http://www.sevenforums.com/windows-updates-activation/160318-after-updates-error-message.html
Relevancy 36.12%

Every single time i try to start up my vaio laptop, it starts up but i can never get to my desktop. It also goes to please wait, configuring updates, and then it shuts down. This continuously goes on for hours at a time so i honestly do not think it is actually updating my laptop. someone please help me!!! I need it for school work!

A:Configuring updates error

I think that the Windows Vista/7 installation disc might fix this. I am not 100% sure but it's worth a shot.

Go to this link: http://windows.microsoft.com/en-us/w...sked-questions

click on how do I use startup repair and follow those steps. It is the same for Vista and Seven.

To boot your computer using the CD: when you turn your computer on there should be a F_: Boot options text somewhere on the first screen, hit that key on your keyboard to boot from CD.

Another thing you could try is starting the computer in safe mode. This may or may not work. When your computer is booting up, hit F8 repeatedly.

Let us know what worked and what didnt work here

Hope this helps!

http://www.techsupportforum.com/forums/f217/configuring-updates-error-490954.html
Relevancy 36.12%

This all started it seems when this last MS update came about today and after it downloaded I clicked 'don't install' by mistake and have not been able to get back on the standard IE except aol's version. Even then many sites including the MS update site give me errors. I tried dl a new urlmon.dll file but that didn't help.AppName: iexplore.exeModName: urlmon.dllModVer:8.0.6001.19019AppVer:6.0.2900.2180Offset:0002df6eException Info:Code: 0xc0000005 Flags:0x00000000Record:0x0000000000000000 Adress: 0x000000007815df6eSystem info: Windows NT 5.1 Build: 2600CPU Vendor Codes...and so on..... modules 1-48 and 1 thread come up.C:\DOCUME~1\Owner\LOCALS~1\Temp\1624_appcompat.txt (is error report file)I really at this point am not sure what version ie im with in the non-aol mode!Thx for any help...

A:IE error can't use explorer to MS updates

http://www.update.microsoft.com/microsoftupdate/v6/default.aspx?ln=en-us

hi, did/do you use the update icon in start allprogram to start the update, click on the link above
also try control panel/system/windows update and use that link

http://www.bleepingcomputer.com/forums/t/383304/ie-error-cant-use-explorer-to-ms-updates/
Relevancy 36.12%

Hello,

My computer has not been able to receive Automatic Updates since June, 2012. There are two updates (Security Update for Windows 7 for x64-based Systems - KB2676562 and Update for Windows 7 for x64-based systems - KB2679255) and I have tried to install both of these manually, but Windows Update tells me that I still need to install them. Looking at the Update History, it seems that they have been "successfully" installing for about a year. I've also tried the suggested Hot Fixes for Windows, tried turning off my firewall, and turning off my antivirus. I'm at a real loss! Any suggestions?

A:Windows Updates Error

Windows Update - Fix a Repeatedly Offered Update may help

http://www.sevenforums.com/windows-updates-activation/274135-windows-updates-error.html
Relevancy 36.12%

Since the Windows updates today I have three updates that continually try to install.
KB 2810048, KB2760411, KB 2760588.
They are listed as "successful" in my list of updates.

When I run the "download & install" it takes about a second before Windows tries starts the installation process. There are no error msgs. but the Updates notif icon shows soon. Reboots don't help.

I ran all of your recommended applications/hotfixes. No joy.

I tried to attach my CBS.zip but got a "500 - Internal server error." message.

Now what?

A:Updates Keep Reinstalling_no error

Have you looked at the topic. That I posted on Patch Tuesday? If not then take a look because you are not alone, go read it

http://www.sevenforums.com/windows-updates-activation/304422-updates-keep-reinstalling_no-error.html
Relevancy 36.12%

For the past day windows wants to install the same updates over and over I have windows update set to download and let me choose when to install I can't understand why I even need them as I uninstalled net framework Notice how the update at AM KB is the same as one of the updates every for for 7 updates time it checks same updates updates Windows installed at PM Windows 7 updates same for updates every time it checks for updates Windows wants to install the same four kb files again How do I stop this Security Update for Microsoft NET Framework on XP Server Vista Windows Server Server R for x KB Installation date PM Installation status Successful Security Update for Microsoft NET Framework on XP Server Vista Windows Server Server R for x KB Installation date PM Installation status Successful Security Update for Microsoft NET Framework on XP Server Vista Windows Server Server R for x KB Installation date PM Installation status Successful Security Update for Microsoft NET Framework on XP Server Vista Windows Server Server R for x KB Installation date PM Installation status Successful Security Update for Microsoft NET Framework on XP Server Vista Windows Server Server R for x KB Installation date AM Installation status Successful

A:Windows 7 updates same for updates every time it checks for updates

See if you can System Restore to before Net Framework 4 was installed and then Hide it when it is again offered in Updates.

But be aware that some programs will need it and may not prompt you of this leaving you to guess why they are not installing or performing correctly. For this reason I always install it.

So you might want to reinstall it using its standalone installer since it may not have uninstalled correctly anyway.

http://www.sevenforums.com/windows-updates-activation/235871-windows-7-updates-same-updates-every-time-checks-updates.html
Relevancy 35.69%

I'm getting this error code when searching for new updates and I also have 3 updates pending to install but I can't install them automatically from updates or manually when I download them from Microsoft separately..

3 Updates in question are;
KB2891804
KB2847077
KB2926765

in attachment is my log..

thanks in front, this is my first post so if I can add anything that could help solve me this problem I'll try get all the info possible, but all I've read and tried so far (some automatic tools from Microsoft) didn't help at all..

A:code 8024000E Updates Error

The SFC results show the following problems...

Code:
Line 253716: 2014-09-05 15:11:35, Info CSI 00000578 [SR] Repairing 16 (0x0000000000000010) components
Line 253717: 2014-09-05 15:11:35, Info CSI 00000579 [SR] Beginning Verify and Repair transaction
Line 253720: 2014-09-05 15:11:35, Info CSI 0000057b [SR] Cannot repair member file [l:20{10}]"urlmon.dll" of Microsoft-Windows-IE-PluggableHandlersAndSecurityZones, Version = 11.2.9600.17207, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
Line 253723: 2014-09-05 15:11:35, Info CSI 0000057d [SR] Cannot repair member file [l:22{11}]"install.ins" of Microsoft-Windows-IE-AdminKitBranding, Version = 11.2.9600.17207, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
Line 253726: 2014-09-05 15:11:35, Info CSI 0000057f [SR] Cannot repair member file [l:30{15}]"mshtmlmedia.dll" of Microsoft-Windows-IE-HTMLRenderingMedia, Version = 11.2.9600.17207, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
Line 253729: 2014-09-05 15:11:35, Info CSI 00000581 [SR] Cannot repair member file [l:54{27}]"MsSpellCheckingFacility.exe" of Microsoft-Windows-Spelling-SpellCheck-Downlevel.Binaries, Version = 6.3.9600.16428, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
Line 253732: 2014-09-05 15:11:35, Info CSI 00000583 [SR] Cannot repair member file [l:32{16}]"iexplore.exe.mui" of Microsoft-Windows-IE-InternetExplorer-Optional.Resources, Version = 11.2.9600.16428, pA = PROCESSOR_ARCHITECTURE_IA32_ON_WIN64 (10), Culture = [l:10{5}]"en-US", VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
Line 253735: 2014-09-05 15:11:35, Info CSI 00000585 [SR] Cannot repair member file [l:24{12}]"jscript9.dll" of Microsoft-Windows-Scripting-JScript9, Version = 11.2.9600.17207, pA = PROCESSOR_ARCHITECTURE_IA32_ON_WIN64 (10), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
Line 253738: 2014-09-05 15:11:35, Info CSI 00000587 [SR] Cannot repair member file [l:22{11}]"elshyph.dll" of Microsoft-Windows-ELS-Hyphenation.Binaries, Version = 6.3.9600.16428, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
Line 253741: 2014-09-05 15:11:35, Info CSI 00000589 [SR] Cannot repair member file [l:30{15}]"wininet.dll.mui" of Microsoft-Windows-IE-ClientNetworkProtocolImplementation.Resources, Version = 11.2.9600.16428, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture = [l:10{5}]"en-US", VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
Line 253744: 2014-09-05 15:11:35, Info CSI 0000058b [SR] Cannot repair member file [l:32{16}]"mshtmler.dll.mui" of Microsoft-Windows-IE-HTMLEditingSupport.Resources, Version = 11.2.9600.16428, pA = PROCESSOR_ARCHITECTURE_... Read more

http://www.sevenforums.com/windows-updates-activation/344368-code-8024000e-updates-error.html
Relevancy 35.69%

Dell Dual Core Vista workstation valid activated Vista SP Norton v Office SBE Directedly connected to DSL router with internet access e-mails and internet fully operational System had AT amp T firewall software installed on it in addition to Norton uninstalled all AT amp T software Windows update fails Cannot connect to windows update server repeated error code Researched error uninstalled Error 80070643, Updates failed... Norton ran Norton removal tool tried update access Error 80070643, Updates failed... failed Found issues online with Office OSE uninstalled Office ran Office removal Error 80070643, Updates failed... tool afterwards removing all registry entires tried updates failed Found remedies inclusive of stopping services and renameing catroot and software distribution folder restarting services after reregistering dlls tried update failed Downloaded and installed standalone version of Windows update connection manager installation failed with error code Put me in a round room and tell me to tinkle in the corner I need help I've thrown everything Error 80070643, Updates failed... I could at this and I'm out of ideas Hope someone out there can help I look forward to a reply Thanks

A:Error 80070643, Updates failed...

Hi -

Do you have either Zone Alarm or Spybot installed?

For further reading and help take a look at these links:
[1] http://windowshelp.microsoft.com/Win...7e1701033.mspx
[2] http://support.microsoft.com/kb/903772

Have you tried updating without Office installed?

http://www.techsupportforum.com/forums/f217/error-80070643-updates-failed-373363.html
Relevancy 35.69%

I am having troubles installing updates for vista. every time it tries to install updates it gets the error code 80072efd. i already added the following sites to the trusted sites list in internet explorer.

http://*.update.microsoft.com
https://*.update.microsoft.com
http://download.windowsupdate.com

I do not know how to add programs to allowed list in CA firewall so i could not do that.

Please help me.

Thank you.

A:vista updates error 80072efd

Moved non-OP post from 10-05-08 to new thread in Vista Support.

http://www.techsupportforum.com/micr...x80072efd.html

This thread is now closed.

@Shahan. . . should you wish to re-visit this topic, please send me a PM.

Regards. . .

jcgriff2

.

http://www.techsupportforum.com/forums/f217/vista-updates-error-80072efd-266545.html
Relevancy 35.69%

Since installing a bundle of updates last week (I'm not sure it that's related or not, but that happens to be when this started), I've been getting an error everytime I start the computer. I've attached a snip of the error. It seems it's an error opening an HTML file called "dnserrordiagoff_weboc". I have no idea what this is or why it's trying to open it. I looked to see if it was just a random thing that was added to my startup, but there's nothing in the startup folder.

What is this and how can I get rid of the error?

Any help would be so appreciated; it's very annoying!

A:Startup Error Since Installing Updates

Try removing update KB942615See if that helpshttp://support.microsoft.com/kb/942615

http://www.bleepingcomputer.com/forums/t/255697/startup-error-since-installing-updates/
Relevancy 35.69%

So i just built this computer plugged in the ethernet cable and I can use the internet, it runs fast. But I cant download anything. Windows update just stays on 0% it finally cancelled itself I'm assuming because it was going too slow just like everything else I have tried to download has. Thats when I got the error 8024402c. So I tried downloading a file off the web. It started around 2000kb/sec then gradually dropped to 2-4kb/sec in a few seconds. I've been scouring the internet trying to find an answer but I cant seem to find one. Any help would be awesome. Thank you
UPDATE
It started working all of the sudden. I didnt do anything and it wasnt working for 4 hours but now I can download. No idea why but if anyone does that would be cool to know

A:Cant download updates error 8024402c

This error usually indicates a connection problem of some kind - perhaps your DNS servers were out of sync.

http://www.sevenforums.com/windows-updates-activation/338939-cant-download-updates-error-8024402c.html
Relevancy 35.69%

Hello,

I've been trying to fix the error, but need some help.

I tried following Microsoft's instruction on replacing the corrupt files, etc. but having a tough time. I have another computer that I can copy the files from, but I'm not even sure where and what files.

I ran the system update readiness tool, and included the log file.

Thank you!

A:Updates failing error 800B0100

Some helpful information here:
Windows Update error 800B0100 - Windows Help

and here:
What is the System Update Readiness Tool? - Windows Help

http://www.sevenforums.com/windows-updates-activation/363986-updates-failing-error-800b0100.html