Windows Support Forum

Constant update failure, error codes 800736B3, 8007065E, 80070103

Q: Constant update failure, error codes 800736B3, 8007065E, 80070103

Hi chaps this is my first time posting here but have used this website for help in the past I can usually fix my own problems but with these I see there is not straight answer I hope someone can help as this has defeated me I'll try to provide all information in the instructions thread but if you need anything else please ask Really hope you guys can help Error codes B E amp Installed SURT http support microsoft com kb 80070103 8007065E, error update 800736B3, codes Constant failure, Ran sfc scannow Quote C Users Administrator gt sfc scannow Beginning system scan This process will take some time Beginning verification phase of system scan Verification complete Windows Resource Protection did not find any integrity violations Rebooted Ran sfc scannow again Quote C Users Administrator gt sfc scannow Beginning system scan This process will take some time Beginning verification phase of system scan Verification complete Windows Resource Protection did not find any integrity violations Retried updates - Failed with above error codes still At this point I collected logs but I'm still stumped

Relevancy 100%
Preferred Solution: Constant update failure, error codes 800736B3, 8007065E, 80070103

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Constant update failure, error codes 800736B3, 8007065E, 80070103

The error codes all relate to registry problems.
There's no errors in the posted logs - please post a couple of the CBSPersist logs, and the C:\Windows\windowsupdate.log file.

Please also list the KB numbers involved.

http://www.sevenforums.com/windows-updates-activation/347622-constant-update-failure-error-codes-800736b3-8007065e-80070103-a.html
Relevancy 104.49%

Hi I have Windows bit Lenovo ideapad that is not allowing system updates and Windows 9C57 800736B3 codes update Error This has been going on for awhile I do some research on the problem and attempt to fix it myself When I am unsuccessful I become frustrated so then I don't try again for several months Meanwhile Windows update Error codes 800736B3 and 9C57 my computer performance is getting worse and worse What I've tried so far Windows updater troubleshooter Service registration missing or corrupt-FIXED Problems installing recent updates-FIXED Starting computer in clean boot to try to install updates Temporarily disabling antivirus software AVG Antivirus Free Edition and trying to run the updates I've downloaded and tried to run the SURT not sure if it actually DID run SFC scan did not find any integrity violations I was unable to upload CBS zip file to this thread I tried a few times Connection was reset I have not yet tried to restore the registry because I'm not confident on how to do it although I did backup my computer on an external hard drive Please let me know if you require any additional information Any insight advice or help would be greatly appreciated Thanks

A:Windows update Error codes 800736B3 and 9C57

Please follow the WindowsUpdate Posting Instructions and post the requested data



If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for anumber of reasons)



Please also post the C:\Windows\windowsudpate.log file

http://www.sevenforums.com/windows-updates-activation/374550-windows-update-error-codes-800736b3-9c57.html
Relevancy 102.34%

Windows Professional x SP GB RAM Intel Core i GB free space on SSD Office Samsung Galaxy Note KIES Hi My Windows x PC has been working codes: failing 800736B3, Windows Error Update 80070246 with 8007371B, fine until recently The trouble started with attempting to use my Samsung Galaxy Note and sync using Samsung's Windows Update failing with Error codes: 8007371B, 800736B3, 80070246 KIES using a USB connection It was a bit glitchy but I finally got the thing to sync But today it didnt want to know Windows Update failing with Error codes: 8007371B, 800736B3, 80070246 and kept saying that my phone had quot No SIM card installed quot which is not true as the phone was picking up a mobile phone signal fine In Task Manager I discovered a thing called TrustedInstaller exe which is persistently taking up to of my processor I looked online and discovered that it was the correct size and that it was something to do with Windows Updates So ran Windows Update and discovered that it wanted to install about patches This is odd because I run Windows Update every or weeks Error code B Error code B But when I ran Windows Update two things failed So I executed a Restore Point to days ago and I ran Window Update again Same problem except that now there are THREE error codes Error code B Error code B Error code So this time I followed the windows error code links and although there was nothing describing my error codes I ran Microsoft FixIt and did Windows Update again Still the same problem So then I download ms System Update Readiness Tool for Win x - KB CLUE When I try to do the Windows Update it doest seem to even download anything and gets stuck at quot Downloading updates KB total complete quot I'm thinking that something is must be wrong if it thinks it needs to download quot KB quot - Any thoughts J

A:Windows Update failing with Error codes: 8007371B, 800736B3, 80070246

Please post the CheckSUR.log and CheckSUR.persist.log files as attachements to your reply.

http://www.sevenforums.com/windows-updates-activation/258141-windows-update-failing-error-codes-8007371b-800736b3-80070246-a.html
Relevancy 99.33%

Hello,

I seem to be running into a popular issue with Windows Update- 800736B3. WU is not completely broken, as it's still able to install updates to Security Essentials and non-system software (IE11, Office). All system updates, however, are failing. I've ran SURT and SFC scan, but both didn't report any outright errors. The logs should be attached to this post in the .zip

Any help would be greatly appreciated! Thank you in advance!

A:Windows Update constant failures, Error 800736B3

There are no errors in CheckSUR or the SFC scan, and nothing significant in the background CBS data.

Please post your C:\Windows\windowsupdate.log file - it may tell us where the problem lies.

http://www.sevenforums.com/windows-updates-activation/334595-windows-update-constant-failures-error-800736b3.html
Relevancy 94.17%

Having done a clean install with my win 7 64-bit desktop and cured a problem I now have Windows update problems and keep getting error codes 800B0100 & 8007065E
NoelDP gave a successful solution for someone else 720 days ago. It looks extremely complicated and involved many questions and answers between NoelDP and Siansheric, so I wonder if there is now an easier answer? The computer seems ok but 4 important updates will not install
Thanks

A:Error codes 800B0100 and 8007065E

I have found out a little more. (I'm the one with the problem!) I spotted that Windows.microsoft.com recommended checking CheckSUR.log located in C:\Windows\Logs\CBS after running the SURT (several times) I found the following in the log:

Checking System Update Readiness.
Binary Version 6.1.7601.22471
Package Version 26.0
2015-04-04 02:28

Checking Windows Servicing Packages

Checking Package Manifests and Catalogs
(f) CBS MUM Corrupt 0x800F0900 servicing\Packages\Package_1_for_KB3019215~31bf3856ad364e35~amd64~~6.1.1.1.mum Line 1:
(f) CBS Catalog Corrupt 0x800B0100 servicing\Packages\Package_1_for_KB3019215~31bf3856ad364e35~amd64~~6.1.1.1.cat
(f) CBS MUM Corrupt 0x800F0900 servicing\Packages\Package_2_for_KB3019215~31bf3856ad364e35~amd64~~6.1.1.1.mum Line 1:
(f) CBS Catalog Corrupt 0x800B0100 servicing\Packages\Package_2_for_KB3019215~31bf3856ad364e35~amd64~~6.1.1.1.cat
(f) CBS MUM Corrupt 0x800F0900 servicing\Packages\Package_3_for_KB3019215~31bf3856ad364e35~amd64~~6.1.1.1.mum Line 1:
(f) CBS Catalog Corrupt 0x800B0100 servicing\Packages\Package_3_for_KB3019215~31bf3856ad364e35~amd64~~6.1.1.1.cat
(f) CBS MUM Corrupt 0x800F0900 servicing\Packages\Package_for_KB3019215_SP1~31bf3856ad364e35~amd64~~6.1.1.1.mum Line 1:
(f) CBS Catalog Corrupt 0x800B0100 servicing\Packages\Package_for_KB3019215_SP1~31bf3856ad364e35~amd64~~6.1.1.1.cat
(f) CBS MUM Corrupt 0x800F0900 servicing\Packages\Package_for_KB3019215~31bf3856ad364e35~amd64~~6.1.1.1.mum Line 1:
(f) CBS Catalog Corrupt 0x800B0100 servicing\Packages\Package_for_KB3019215~31bf3856ad364e35~amd64~~6.1.1.1.cat

Then a bit later:
Summary:
Seconds executed: 393
Found 18 errors
CSI Manifest All Zeros Total count: 8
CBS MUM Corrupt Total count: 5
CBS Catalog Corrupt Total count: 5

Unavailable repair files:
winsxs\manifests\amd64_microsoft-windows-webdavredir-davclient_31bf3856ad364e35_6.1.7601.22913_none_f27bfa1981fd5c4e.manifest
winsxs\manifests\amd64_microsoft-windows-webdavredir-webclient_31bf3856ad364e35_6.1.7601.22913_none_b3d45a96e36fc54b.manifest
winsxs\manifests\amd64_microsoft-windows-webdavredir-mrxdav_31bf3856ad364e35_6.1.7601.22913_none_73597611f579c664.manifest
winsxs\manifests\x86_microsoft-windows-webdavredir-webclient_31bf3856ad364e35_6.1.7601.22913_none_57b5bf132b125415.manifest
winsxs\manifests\x86

Can I do anything about this? I have a laptop with WIN7 64-bit on it. Could I copy files across, or would it be easier to re-install?

http://www.sevenforums.com/windows-updates-activation/366125-error-codes-800b0100-8007065e.html
Relevancy 89.01%

Can anyone help me with these errors? I have had this error for about a day and have found know help on Google so please if you can help in anyway, thanks in advance!

A:How to fix the error codes 80072EFE and 800736B3

The 80072EFE error is simply a bad internet connection - although that can be due either to physical problems or software interferences by malware, firewalls, etc.

The 800736B3 error is somewhat different.

Please follow the Windows Update Posting Instructions and post the requested data.

http://www.sevenforums.com/windows-updates-activation/290374-how-fix-error-codes-80072efe-800736b3.html
Relevancy 84.71%

Heya. Tried finding some posts for these but it's 4 am and I need to sleep soon, so.

I keep having my computer failing to update after having them turned off (Because it would restart my computer in the middle of a digital painting... You can guess my anger levels.) now for a few months, so I know that's probably an issue.

Most of them have the 705B4 error, the ones on my list that said "failed"

Some that are "pending" are the 242014 error and 72afc and 24001e, 24607.. oh my so many error codes It would take forever to find these all.

Microsoft fix it found 80070057 code.

A walkthrough would be great thanks :'3

I've tried the Microsoft fixit things and several other forums that had issues with updates but they didn't have the same error codes...

Relevancy 84.71%

Every time I try to install windows updates I receive multiple errors and they all seem to lead to corrupt manifest files One of the updates includes Windows SP The Failure Multiple Error Update Windows with Codes errors I receive are Code Code B Code I ran sfc scannow and it found no problems I tried a system restore that did not resolve the issue I then ran the update readyness tool and the following result was logged Quote Unavailable repair files winsxs manifests amd microsoft-windows-ie-behaviors bf ad e none b ee c be ae manifest winsxs manifests wow microsoft-windows-ie-behaviors bf ad e none be d ed fce manifest winsxs manifests amd microsoft-windows-ie-feedsbs bf ad e none a b ce manifest winsxs manifests x microsoft-windows-ie-feedsbs bf ad e none a a b eb d d manifest winsxs manifests amd microsoft-windows-ieframe bf ad e none db bbfc ea d d manifest winsxs manifests wow microsoft-windows-ieframe bf ad e none e e a d manifest winsxs manifests wow microsoft-windows-ie-htmlediting bf ad e none cbbc f ea manifest winsxs manifests amd microsoft-windows-ie-htmlediting bf ad e none c eea manifest winsxs manifests x microsoft-windows-ie-ieproxy bf ad e none acdef b fe manifest winsxs manifests amd microsoft-windows-ie-ieproxy bf ad e none fd bd eb manifest winsxs manifests amd microsoft-windows-i mlrenderingadvanced bf ad e none f b e b f manifest winsxs manifests wow microsoft-windows-i mlrenderingadvanced Windows Update Failure with Multiple Error Codes bf ad e none f aaecd a manifest winsxs manifests amd microsoft-windows-i ersandsecurityzones bf ad e none bcc afc b e manifest winsxs manifests x microsoft-windows-i ersandsecurityzones bf ad e none cfadcf aef ab manifest winsxs manifests amd microsoft-windows-ie-extcompat bf ad e none b ff d a manifest winsxs manifests x microsoft-windows-ie-extcompat bf ad e none a faec f manifest winsxs manifests amd microsoft-windows-ieframe bf ad e none dde fe bc manifest winsxs manifests wow microsoft-windows-ieframe bf ad e none e c f ab manifest winsxs manifests amd microsoft-windows-ie-extcompat bf ad e none b daba b manifest winsxs manifests x microsoft-windows-ie-extcompat bf ad e none bc edcc f manifest winsxs manifests amd microsoft-windows-ie-feeds-platform bf ad e none d b a c c manifest winsxs manifests wow microsoft-windows-ie-feeds-platform bf ad e none e e afc bc manifest winsxs manifests amd microsoft-windows-i tocolimplementation bf ad e none ab a a f f manifest winsxs manifests x microsoft-windows-i tocolimplementation bf ad e none e d bdd manifest winsxs manifests amd microsoft-windows-ie-htmlactivexcompat bf ad e none e c a cfc manifest winsxs manifests x microsoft-windows-ie-htmlactivexcompat bf ad e none a e e f bbc manifest winsxs manifests x microsoft-windows-ie-ieproxy bf ad e none ad ef baa manifest winsxs manifests amd microsoft-windows-ie-ieproxy bf ad e none d f bd manifest winsxs manifests amd microsoft-windows-ie-runtimeutilities bf ad e none beceb b f e manifest winsxs manifests amd microsoft-windows-i etexplorer-optional bf ad e none f faf a e c manifest winsxs manifests wow microsoft-windows-i etexplorer-optional bf ad e none f cc ad d manifest winsxs manifests amd microsoft-windows-i mlrenderingadvanced bf ad e none aef c cf manifest winsxs manifests wow microsoft-windows-i mlrenderingadvanced bf ad e none a a b manifest winsxs manifests amd microsoft-windows-ie-feedsbs bf ad e none fd d manifest winsxs manifests x microsoft-windows-ie-feedsbs bf ad e none a e cc ff c manifest winsxs manifests wow microsoft-windows-ie-htmlrendering bf ad e none a ac manifest winsxs manifests amd microsoft-windows-ie-htmlrendering bf ad e none ac c cbc ca manifest winsxs manifests amd microsoft-windows-ie-feeds-platform bf ad e none d cfdd ccafd f c manifest winsxs manifests wow microsoft-windows-ie-feeds-platform bf ad e none e beff df manifest winsxs manifests x microsoft-windows-ie-devtools bf ad e none fc d ffb f manifest winsxs manifests amd microsoft-windows-ie-... Read more

A:Windows Update Failure with Multiple Error Codes

Hello, and welcome to the Seven Forums!

Well, hopefully we can avoid a complete reinstall, because I do have a few tricks up my sleeve

Can you please upload for me an unmodified copy of C:\Windows\Logs\CBS\CheckSUR.persist.log, and I shall see what I can do.

Also, ideally, please avoid chopping up log files, because although I can read them, to save time when sourcing hundreds of files at once, I have many automated tools to do repetitive portions of the work for me, and truncated logs confuse these tools. But I already have a pretty good idea with what is going on with your computer, and well done for running the System Update Readiness Tool.

Thanks a lot!

Richard

http://www.sevenforums.com/windows-updates-activation/186655-windows-update-failure-multiple-error-codes.html
Relevancy 83.42%
Relevancy 80.41%

Greetings,

I am unable to install "Update for Windows 7 for x64-based Systems (KB2761217)" and get "Error Code 8007065E" after the update finishes downloading and attempts to install. See attached for the logs and a screenshot of the error.
Thanks!
Yoha

A:Windows Update Error 8007065E on Update KB2761217

You have some errors in the CheckSUR log which are likely causing your problem - for ease of access, I'll put them here....

Code:
Unavailable repair files:
winsxs\manifests\amd64_microsoft-windows-g..validatefntcache-06_31bf3856ad364e35_6.1.7601.22118_none_a7612cac4a5ea0e2.manifest
winsxs\manifests\amd64_microsoft-windows-g..validatefntcache-06_31bf3856ad364e35_6.1.7600.17130_none_a4d38ecd3432052f.manifest
winsxs\manifests\amd64_microsoft-windows-font-truetype-calibri_31bf3856ad364e35_6.1.7600.17130_none_46cc128a0951a80d.manifest
winsxs\manifests\amd64_microsoft-windows-g..validatefntcache-06_31bf3856ad364e35_6.1.7600.21329_none_a57100044d3f6a3e.manifest
winsxs\manifests\amd64_microsoft-windows-font-truetype-calibri_31bf3856ad364e35_6.1.7601.22118_none_4959b0691f7e43c0.manifest
winsxs\manifests\amd64_microsoft-windows-font-truetype-calibri_31bf3856ad364e35_6.1.7601.17959_none_48a5fc16067ff9cf.manifest
winsxs\manifests\amd64_microsoft-windows-g..validatefntcache-06_31bf3856ad364e35_6.1.7601.17959_none_a6ad7859316056f1.manifest
winsxs\manifests\amd64_microsoft-windows-font-truetype-calibri_31bf3856ad364e35_6.1.7600.21329_none_476983c1225f0d1c.manifest
servicing\packages\Package_1_for_KB2761217~31bf3856ad364e35~amd64~~6.1.1.0.mum
servicing\packages\Package_1_for_KB2761217~31bf3856ad364e35~amd64~~6.1.1.0.mum
servicing\packages\Package_4_for_KB2761217~31bf3856ad364e35~amd64~~6.1.1.0.mum
servicing\packages\Package_4_for_KB2761217~31bf3856ad364e35~amd64~~6.1.1.0.mum
servicing\packages\Package_6_for_KB2761217~31bf3856ad364e35~amd64~~6.1.1.0.mum
servicing\packages\Package_6_for_KB2761217~31bf3856ad364e35~amd64~~6.1.1.0.mum
servicing\packages\Package_9_for_KB2761217~31bf3856ad364e35~amd64~~6.1.1.0.mum
servicing\packages\Package_9_for_KB2761217~31bf3856ad364e35~amd64~~6.1.1.0.mum
servicing\packages\Package_for_KB2761217_RTM~31bf3856ad364e35~amd64~~6.1.1.0.mum
servicing\packages\Package_for_KB2761217_RTM~31bf3856ad364e35~amd64~~6.1.1.0.mum
servicing\packages\Package_for_KB2761217_SP1~31bf3856ad364e35~amd64~~6.1.1.0.mum
servicing\packages\Package_for_KB2761217_SP1~31bf3856ad364e35~amd64~~6.1.1.0.mum
servicing\packages\Package_for_KB2761217~31bf3856ad364e35~amd64~~6.1.1.0.mum
servicing\packages\Package_for_KB2761217~31bf3856ad364e35~amd64~~6.1.1.0.mum
servicing\packages\Package_1_for_KB2761217~31bf3856ad364e35~amd64~~6.1.1.0.cat
servicing\packages\Package_1_for_KB2761217~31bf3856ad364e35~amd64~~6.1.1.0.cat
servicing\packages\Package_4_for_KB2761217~31bf3856ad364e35~amd64~~6.1.1.0.cat
servicing\packages\Package_4_for_KB2761217~31bf3856ad364e35~amd64~~6.1.1.0.cat
servicing\packages\Package_6_for_KB2761217~31bf3856ad364e35~amd64~~6.1.1.0.cat
servicing\packages\Package_6_for_KB2761217~31bf3856ad364e35~amd64~~6.1.1.0.cat
servicing\packages\Package_9_for_KB2761217~31bf3856ad364e35~amd64~~6.1.1.0.cat
servicing\packages\Package_9_for_KB2761217~31bf3856ad364e35~amd64~~6.1.1.0.cat
servicing\packages\Package_for_KB2761217_RTM~31bf3856ad364e35~amd64~~6.1.1.0.cat
servicing\packages\Package_for_KB2761217_RTM~31bf3856ad364e35~amd64~~6.1.1.0.cat
servicing\packages\Package_for_KB2761217_SP1~31bf3856ad364e35~amd64~~6.1.1.0.cat
servicing\packages\Package_for_KB2761217_SP1~31bf3856ad364e35~amd64~~6.1.1.0.cat
servicing\packages\Package_for_KB2761217~31bf3856ad364e35~amd64~~6.1.1.0.cat
servicing\packages\Package_for_KB2761217~31bf3856ad364e35~amd64~~6.1.1.0.cat

Your SFC scan is apparently clear..

I'll post a fix protocol later for you.

http://www.sevenforums.com/windows-updates-activation/275300-windows-update-error-8007065e-update-kb2761217.html
Relevancy 79.55%

I get the Error number in the title when I try updating my Ethernet drivers via Windows Update.

Clicking the "Get help with this error" from Update finds 0 results, and the description of the error is "unknown error" so I am a bit at a loss what it means.

Does anybody have any idea what I could try?

A:Windows Update Error 80070103

.

Hi.

The same thing happened to me. In my case, I tried later in the day and it worked fine.

Good luck.

.

http://www.sevenforums.com/windows-updates-activation/3256-windows-update-error-80070103-a.html
Relevancy 79.55%

Been having this same problem with trying to install intel driver for moblie intel 965 express chipset family for my dell latitude 830 laptop. Windows update makes an attempt to install driver but it continusly fails. Same problem with the last three win 7 versions including 7229x64. No problem when I had vista on this laptop. As a result I'm stuck with having to use default video controller drivers. Drivermax did not help.

A:Win 7 Update error code 80070103

Try a program called Radarsync, install it and follow the instructions, it might help you .

http://www.sevenforums.com/windows-updates-activation/13338-win-7-update-error-code-80070103-a.html
Relevancy 79.55%

hi guys ...
every time i try to install this update
i get this error
and i think it's causing this
any ideas ?

A:update error code 80070103 ...

Hello.

You might to check this webpage, it might help you :
Windows Update error 80070103

Give us feedback.
Bye

http://www.sevenforums.com/windows-updates-activation/101554-update-error-code-80070103-a.html
Relevancy 79.55%

My computer fails to install the update for windows 7 for 64x-based systems (KB2761217)

The error code is 8007065E

I've tried the windows fixit program and the problem still persists.

Attached is the CBS.log

Can I get some help please =)

A:Windows 7 update failed. Error 8007065E

The problem is this...

Code:
2013-11-03 09:07:39, Info CBS Read out cached package applicability for package: Package_for_KB2584146~31bf3856ad364e35~amd64~~6.1.1.3, ApplicableState: 112, CurrentState:112
2013-11-03 09:07:45, Info CBS Session: 30333086_301750403 initialized by client WindowsUpdateAgent.
2013-11-03 09:07:45, Info DPX Started DPX phase: Resume and Download Job
2013-11-03 09:07:45, Info DPX Started DPX phase: Apply Deltas Provided In File
2013-11-03 09:07:45, Info DPX Ended DPX phase: Apply Deltas Provided In File
2013-11-03 09:07:45, Info DPX Ended DPX phase: Resume and Download Job
2013-11-03 09:07:45, Info DPX DpxException hr=0x8007065e code=0x020217
2013-11-03 09:07:45, Info CBS Failed to extract file update.mum from cabinet \\?\C:\Windows\SoftwareDistribution\Download\8de8eccc51302e3ad3cd631c70492dc1\windows6.1-kb2761217-x64-express.cab [HRESULT = 0x8007065e - ERROR_UNSUPPORTED_TYPE]
2013-11-03 09:07:45, Info CBS Failed to extract package manifest from cabinet [HRESULT = 0x8007065e - ERROR_UNSUPPORTED_TYPE]
2013-11-03 09:07:45, Info CBS Failed to initialize internal package [HRESULT = 0x8007065e - ERROR_UNSUPPORTED_TYPE]
2013-11-03 09:07:45, Error CBS Failed to create internal package [HRESULT = 0x8007065e - ERROR_UNSUPPORTED_TYPE]
2013-11-03 09:07:48, Info CBS Session: 30333086_329562903 initialized by client WindowsUpdateAgent.
This appears to be corruption in the SoftwareDistribution folder

Let's see if we can cure it the 'easy way' -

Open an Elevated Command Prompt, and run the following command...

RD C:\Windows\SoftwareDistribution\Download\8de8eccc51302e3ad3cd631c70492dc1 /S /Q

reboot, and then run another Check for Updates - then try installing ONLY KB2584146.



Here are some instructions to make lifeeasier

1) To open anElevated Command Prompt Window (the ECP window), click on Start, All Programs,Accessories – then right-click on Command Prompt, and select Run asAdministrator. Accept the UAC prompt.

2) To run thecommands easier, highlight the block of commands, and right-click on thehighlight – select Copy. In the CP Window, click on the black/white icon at topleft – select Paste. The commands will run but may not complete the lastcommand, so hit the Enter Key once.

3) To copy theresults... click on the Black/White icon in the top left, and select Edit...'Select All', and hit the Enter key - then use Ctrl+V or r-click+Paste to pasteit into your response.

http://www.sevenforums.com/windows-updates-activation/310526-windows-7-update-failed-error-8007065e.html
Relevancy 79.55%

Hi, 
 
I just freshly installed windows 7 on a new computer I have just built. My windows update keeps giving me an error and won't let me update a few important updates.
 
I have tried various solutions like windows 7 hot fix to check if there were any errors on my windows files, also sfc /scannow, but nothing was corrupted.
 
Is there a solution to these two error codes?
 
 

http://www.bleepingcomputer.com/forums/t/628143/windows-update-error-800b0100-8007065e/
Relevancy 79.55%

Hi,

I just built myself a new computer and I'm currently trying to do window updates for windows 7 ult OS.

I kept running into these two main errors that prevent me from installing multiple important updates.

My hardware spec:

MOBO: ASUS Z170-A RTL
Ram: GSkill 8GB 3200
CPU: Intel Core i5 6600K 3.50G
GPU: AMD VGA Sapphire 100406 NT

I have tried various solutions to try and fix this issue, but it seems like most people who have these error codes have only 1 or 2 updates that it occurs on, but I have multiple.

I have tried using /sfc scannow to verify my files and it stated that nothing was corrupted.

I did get a BSOD when initially downloading the updates due to improper ram placement. I fixed the ram placement and restarted the updates. Everything was fine until these two errors popped up.

Please help me resolve this issue

http://www.sevenforums.com/windows-updates-activation/401177-windows-update-error-800b0100-8007065e.html
Relevancy 79.55%

I am using Windows Home Premium on a bit operating system I haven t used this computer in over a year but my brother has been using it since but hasn t kept it updated at all or with any anti-virus I was able to install everything on Windows Update except Security Update for Windows for x -based code error update 8007065E Windows Systems KB I ve tried everything from simply restarting rebooting in safe mode and safe mode with networking I could not open windows update either of those ways and doing a safe mode with networking full scan with Malewarebytes Anti-Malware Super Anti Spyware and Microsoft Security Essentials I did find trojans and removed them and rebooted but was unable to install this security pack still When I tried installing the individual version of Windows update error code 8007065E the security pack online it told me the update Windows update error code 8007065E did not apply to this system I also tried running the windows update repair tool On a side note but related to the issue of trying to make the computer more secure I made a separate administrator account and downgraded my own account to a standard user but I m unable to demote my brother s administrator account His is not password protected but there is no option to change the account type even when I m logged on as him or under the other administrator account I just made nbsp

A:Windows update error code 8007065E

Assign a password to your brother's account. Maybe then the demotion will work.
 

https://forums.techguy.org/threads/windows-update-error-code-8007065e.1081874/
Relevancy 78.69%

Hi,
Can anyone help ? Keep getting that irritating message in my Win Update box. My system is WinVista Home Premium 32bt and my laptop is HP dv9000 Pavilion unit. Going generally with this unit. Disruptive shutdowns, expanding error logs,. Sometimes works like a other times . Machine plagued by "non responding" notifications and all the s that have serviced it seem to have made it worse. HELP

PETROS

http://www.vistax64.com/windows-updates/222133-error-code-80070103-windows-update.html
Relevancy 78.69%

Trying to allow Windows Update to search for some of my drivers, and I get error code 80070103 when trying to download and install. What's going on with this?

A:Windows Update - Error Code 80070103

Please follow the Windows Update Posting Instructions and post the requested data

http://www.sevenforums.com/windows-updates-activation/316460-windows-update-error-code-80070103-a.html
Relevancy 78.69%

Hello, I have attempted to update windows 7 with the : Security update for windows 7 for X64 systems (KB2619339) with only failed results. the error code is : 8007065E

I have CBS logs WINDOWS resource protection found corrupt files but was unable to fix some of them.

Any help is appreciated as I like to keep my windows up to date and am rather confused.

Attached are the CBS logs.

In advance thanks for any help.
Shayne

A:Windows unable to update: error code : 8007065E

shayneacids,

Welcome to SevenForums.

Please follow this procedure.

Be sure to delete the existing logs first as explained in the procedure.

Upload ( do not post inline) the resulting SFCDETAILS.TXT file.

System File Checker – SFC

System File Checker checks system files and restores them if possible.

System File Checker places results in:
%windir%\logs\cbs

My preference is to empty the abovementioned folder BEFORE I run SFC.

How to empty the “results” folder
? Run CMD.EXE as administrator
o WIN | type CMD.EXE | do NOT hit ENTER |
o CTRL + Shift + ENTER key combo | YES button
? Type following commands, each followed with ENTER key
o CD %windir%\logs\CBS
o DEL *.*
o EXIT

To run System File Checker:
WIN | type CMD.EXE | do NOT hit Enter| CTRL + SHIFT + ENTER key combo | YES button
WIN is the key with the Microsoft flag on top.

Enter SFC /SCANNOW
When System File Checker finishes---

If you do not see:
Verification 100% complete.
Windows Resource Protection did not find any integrity violations.

Then:
? Type EXIT to return
? RESTART your computer
? Run sfc /scannow again

If you do not see:
Windows Resource Protection did not find any integrity violations.

Then:
? Type EXIT to return
? RESTART your computer
? Run sfc /scannow again

If you do not see:
Windows Resource Protection did not find any integrity violations.

Then:
? Type EXIT to return
? RESTART your computer
? Run sfc /scannow again
Notice that you have run sfc and restarted your computer up to three times.

? If all did not go well, you can use
the findstr command to view the results.

VIEW THE RESULTS
Put the System File Checker (SFC) results in a File on the Desktop
findstr /c:"[SR]" %windir%\Logs\CBS\CBS.log > %userprofile%\desktop\sfcdetails.txt
where /C: specifies the desired search string

http://www.sevenforums.com/windows-updates-activation/230807-windows-unable-update-error-code-8007065e.html
Relevancy 78.69%

Hi Since this week i'm having issue with Windows Update I have four updates that failed The error i got is B and E I've ran the SURT Tool which gave me this Code Checking System Update Readiness Binary Version Package Version - - Checking Windows Servicing Packages Checking Package Manifests and Catalogs f CBS MUM Corrupt x servicing Packages Microsoft-Windows-IE-Hyphenation-Parent-Package-English bf ad e mum Expected file name Microsoft-Windows-IE-Hyphenation-Parent-Package-English bf ad e 8007065E Error and 800B0100 Update Code Windows neutral mum does not match the actual file name f CBS MUM Corrupt x servicing Packages Microsoft-Windows-IE-Hyphenation-Parent-Package-French bf ad e mum Expected file name Microsoft-Windows-IE-Hyphenation-Parent-Package-French bf ad e neutral mum does not match the actual file name f CBS MUM Corrupt x servicing Packages Microsoft-Windows-IE-Spelling-Parent-Package-English bf ad e mum Expected file name Windows Update Error Code 800B0100 and 8007065E Microsoft-Windows-IE-Spelling-Parent-Package-English bf ad e neutral mum does not match the actual file name f Windows Update Error Code 800B0100 and 8007065E CBS MUM Corrupt x servicing Packages Microsoft-Windows-IE-Spelling-Parent-Package-French bf ad e mum Expected file name Microsoft-Windows-IE-Spelling-Parent-Package-French bf ad e neutral mum does not match the actual file name f CBS MUM Corrupt x F servicing Packages Package for KB bf ad e amd mum Line f CBS Catalog Corrupt x B servicing Packages Package for KB bf ad e amd cat f CBS MUM Corrupt x F servicing Packages Package for KB bf ad e amd mum Line f CBS Catalog Corrupt x B servicing Packages Package for KB bf ad e amd cat f CBS MUM Corrupt x F servicing Packages Package for KB bf ad e amd mum Line f CBS Catalog Corrupt x B servicing Packages Package for KB bf ad e amd cat f CBS MUM Corrupt x F servicing Packages Package for KB SP bf ad e amd mum Line f CBS Catalog Corrupt x B servicing Packages Package for KB SP bf ad e amd cat f CBS MUM Corrupt x F servicing Packages Package for KB bf ad e amd mum Line f CBS Catalog Corrupt x B servicing Packages Package for KB bf ad e amd cat f CBS MUM Corrupt x F servicing Packages Package for KB SP bf ad e amd mum Line f CBS Catalog Corrupt x B servicing Packages Package for KB SP bf ad e amd cat f CBS MUM Corrupt x F servicing Packages Package for KB bf ad e amd mum Line f CBS Catalog Corrupt x B servicing Packages Package for KB bf ad e amd cat Checking Package Watchlist Checking Component Watchlist Checking Packages Checking Component Store f CSI Manifest All Zeros x winsxs Manifests amd microsoft-windows-t tivexcore resources bf ad e fr-fr c c aa e b manifest amd microsoft-windows-t tivexcore resources bf ad e fr-fr c c aa e b f CSI Manifest All Zeros x winsxs Manifests x microsoft-windows-t tivexcore resources bf ad e fr-fr a c f f d manifest x microsoft-windows-t tivexcore resources bf ad e fr-fr a c f f d f CSI Manifest All Zeros x winsxs Manifests wow microsoft-windows-win k bf ad e none b c fed c manifest wow microsoft-windows-win k bf ad e none b c fed c f CSI Manifest All Zeros x winsxs Manifests x microsoft-windows-t s-clientactivexcore bf ad e none b c dbf manifest x microsoft-windows-t s-clientactivexcore bf ad e none b c dbf f CSI Manifest All Zeros x winsxs Manifests amd microsoft-windows-t s-clientactivexcore bf ad e none dd ecfdc ef manifest amd microsoft-windows-t s-clientactivexcore bf ad e none dd ecfdc ef f CSI Manifest All Zeros x winsxs Manifests amd microsoft-windows-win k bf ad e none ffb d c manifest amd microsoft-windows-win k bf ad e none ffb d c f CSI Manifest All Zeros x winsxs Manifests amd microsoft-windows-win k bf ad e none f d eca manifest amd microsoft-windows-win k bf ad e none f d eca f CSI Manifest All Zeros x winsxs Manifests amd microsoft-windows-ntfs bf ad e none a e c f manifest amd microsoft-windows-ntfs bf ad e none a e c f f CSI Manifest All Zeros x winsxs Manifests amd microsoft-windows-ntfs bf ad e n... Read more

A:Windows Update Error Code 800B0100 and 8007065E

I think we've been lucky - all the affected files are culture-neutral, so far as I can see, apart from the IE10 files, which so far as I know are currently unfixable, as they are due to a bug that MS is currently trying to deal with.

I'll post back with a fix for the rest, later.

http://www.sevenforums.com/windows-updates-activation/285818-windows-update-error-code-800b0100-8007065e.html
Relevancy 77.83%

Intel Corporation Graphics Adapter WDDM Update with Gigabyte having M$ error 80070103 Computer trouble Graphics Adapter WDDM Graphics Adapter WDDM software update released in Gigabyte Computer having trouble with M$ Update 80070103 error May I have tried updating with Intel itself on driver and mine is up to date Also ran driver Genius Gigabyte Computer having trouble with M$ Update 80070103 error and up to date and yet going to MS seems to be the driver Has anyone else had this problem Posting below cut and paste of my main components GIGABYTE ------------------------------------------------------------------------------------------------------------------------------------------- Operating System Microsoft Windows Home Premium x Build Service Pack Service Pack Processor Intel Pentium G MHz Motherboard GIGABYTE H M-USB H Intel H Cougar Point Memory GBytes Single-Channel Hard Drive Hitachi HDS CLA MBytes GB TOSHIBA MQ ABD MBytes GB Optical Drive TSSTcorp CDDVDW SH- DB DVD R DL Display Adapter Intel Ivy Bridge-DT GT - Integrated Graphics Controller E L N P GIGABYTE Intel reported Product Intel HD graphics or Intel HD Graphics Version No your driver is current I have no more ideas of how to get this update down if it is not the driver as M seems to think it is Any ideas

A:Gigabyte Computer having trouble with M$ Update 80070103 error

   Information
Run the Windows Update troubleshooter
Run the Windows Update troubleshooter, then open Windows Update and try to install the update again.
If running the troubleshooter doesn't solve the problem, download and install the specific update that's causing the error. To do this, follow these steps to identify, download and install the update you need.

http://www.sevenforums.com/drivers/343663-gigabyte-computer-having-trouble-m-update-80070103-error.html
Relevancy 77.83%

Any idea why this update has failed 5 times?Intel Corporation driver update for Intel(R) HD Graphics 4400Installation date: 07/30/2016 5:02 PMinstallation status: FailedError details: Code 80070103Update type: Important  

A:Windows Update won’t install - Error 80070103

It's failing Lenovo driver validation.   You can follow the directions in this thread if wish to update to a later driver than the Lenovo published driver.  

https://forums.lenovo.com/t5/ThinkCentre-A-E-M-S-Series/Windows-Update-won-t-install-Error-80070103/td-p/3383134
Relevancy 75.25%

Hi
I have problems with Windows Update, it does not install updates.
I have run SURT and SFC Scan.
Logs enclosed.

Many thanks for your help!

A:Windows Update: error 800736B3

This is the only error in the SFC scan...

Code:
Line 3507: 2015-02-27 11:22:03, Info CSI 00000310 [SR] Repairing 1 components
Line 3508: 2015-02-27 11:22:03, Info CSI 00000311 [SR] Beginning Verify and Repair transaction
Line 3511: 2015-02-27 11:22:03, Info CSI 00000313 [SR] Cannot repair member file [l:22{11}]"PINTLGB.IMD" of Microsoft-Windows-IME-Simplified-Chinese-Core, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
Line 3514: 2015-02-27 11:22:04, Info CSI 00000315 [SR] Cannot repair member file [l:22{11}]"PINTLGB.IMD" of Microsoft-Windows-IME-Simplified-Chinese-Core, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
Line 3515: 2015-02-27 11:22:04, Info CSI 00000316 [SR] This component was referenced by [l:202{101}]"Microsoft-Windows-Foundation-Package~31bf3856ad364e35~amd64~~6.1.7601.17514.WindowsFoundationDelivery"
Line 3520: 2015-02-27 11:22:04, Info CSI 00000319 [SR] Could not reproject corrupted file [ml:520{260},l:62{31}]"\??\C:\Windows\IME\IMESC5\DICTS"\[l:22{11}]"PINTLGB.IMD"; source file in store is also corrupted
Line 3533: 2015-02-27 11:22:05, Info CSI 0000031b [SR] Repair complete
I'll post a fix protocol later.

http://www.sevenforums.com/windows-updates-activation/362678-windows-update-error-800736b3.html
Relevancy 75.25%

I have a computer that has been failing to install the IE cumulative updates. It is now also failing to install the bundled security updates (KB3192391 for example). I have tried the system readiness tool, clearing out the database, manually installing,
removing/re-adding IE from Windows features, and running SFC scan. I cannot find a solution for error 800736B3. Anyone know any other things I can do?
This is for a business computer. Would I qualify for free Microsoft support? If I do, how do I start that process?

https://social.technet.microsoft.com/Forums/en-US/77791b84-fa65-4e6b-a2ff-6ab21a7e926e/windows-update-error-800736b3?forum=w7itprosecurity
Relevancy 75.25%

Okay I currently have the CBS file compressing but here's the basic rundown of my problem: Updates fail to install and gives me error code 800736B3, no matter how I try to install them, one at a time, all at once, on shutdown, while computer is running, etc. It has continually asked me to run checkdisk when I turn it on and won't run unless I do, and when it does run, it deletes files that are Corrupted, I think? Has crashed my computer once this past week which made me begin to look into the issue

Edit- The file won't attach normally so I've uploaded it to a public Google drive.
Link for that is here. https://drive.google.com/folderview?...Tg&usp=sharing

A:Windows Update Error 800736B3

Can you complete this Tutorial. If you can please do.

Windows Update Posting Instructions

http://www.sevenforums.com/windows-updates-activation/373124-windows-update-error-800736b3.html
Relevancy 75.25%

I have lurked in this forum in the past - always finding answers. Thanks to all the experts contributing to this forum.

This time I joined so I could post, as I have been unable to find a solution to my problem.

I can install all updates except for SP1. I keep getting error 800736B3.

I ran the Update Troubleshooter, which claims to have repaired Win Update components - still same error.

I then successfully ran the hotfix KB947821. The same error occurs.

I ran sfc /scannow & no integrity violations were found.

I also tried again after a clean boot - same error.

I don't have a clue as to what to try now. Any suggestions?

A:Error Code 800736B3 on SP1 Update

Try reading here

Hopefully stuff in there will help.

http://www.sevenforums.com/windows-updates-activation/146628-error-code-800736b3-sp1-update.html
Relevancy 74.39%

Hi,
I have a problem with Windows Update. Firstly, i got windows update servise not running message. Then I was download the System Update Readiness Tool when i start that i get this error code 0x8007000d. Finally I tried update in windows update again i get this error code 800736B3.
I would greatly appreciate any help with this.

A:Windows Update, error code 800736B3

We also need the CheckSUR.log file created by running the CheckSUR/SURT tool - even if incomplete, it may give us some clues.


Your SFC scan identified the following problems -

Code:
Line 9296: 2014-06-06 13:33:15, Info CSI 00000244 [SR] Repairing 7 components
Line 9297: 2014-06-06 13:33:15, Info CSI 00000245 [SR] Beginning Verify and Repair transaction
Line 9298: 2014-06-06 13:33:15, Info CSI 00000246 [SR] Cannot repair member file [l:22{11}]"lsi_sas.sys" of lsi_sas.inf, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, file is missing
Line 9299: 2014-06-06 13:33:15, Info CSI 00000247 [SR] Cannot repair member file [l:20{10}]"lsi_fc.sys" of lsi_fc.inf, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, file is missing
Line 9300: 2014-06-06 13:33:16, Info CSI 00000248 [SR] Cannot repair member file [l:32{16}]"bthmigplugin.dll" of Microsoft-Windows-BTH-USER, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, file is missing
Line 9301: 2014-06-06 13:33:17, Info CSI 00000249 [SR] Cannot repair member file [l:102{51}]"Microsoft-Windows-IIS-HTTPLogging-Deployment-DL.man" of Microsoft-Windows-Migration-DownlevelManifests, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, file is missing
Line 9302: 2014-06-06 13:33:17, Info CSI 0000024a [SR] Cannot repair member file [l:76{38}]"MediaServer-Multicast-Migration-DL.man" of Microsoft-Windows-Migration-DownlevelManifests, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, file is missing
Line 9303: 2014-06-06 13:33:17, Info CSI 0000024b [SR] Cannot repair member file [l:100{50}]"Microsoft-Windows-IIS-IPSecurity-Deployment-DL.man" of Microsoft-Windows-Migration-DownlevelManifests, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, file is missing
Line 9304: 2014-06-06 13:33:17, Info CSI 0000024c [SR] Cannot repair member file [l:30{15}]"winlogon-DL.man" of Microsoft-Windows-Migration-DownlevelManifests, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, file is missing
Line 9305: 2014-06-06 13:33:17, Info CSI 0000024d [SR] Cannot repair member file [l:24{12}]"msdtcstp.dll" of Microsoft-Windows-Migration-DownlevelManifests, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, file is missing
Line 9306: 2014-06-06 13:33:17, Info CSI 0000024e [SR] Cannot repair member file [l:44{22}]"TabletPCJournal-DL.man" of Microsoft-Windows-Migra... Read more

http://www.sevenforums.com/windows-updates-activation/333896-windows-update-error-code-800736b3.html
Relevancy 74.39%

Hi,

i need help - my windows update doesn't work.

I put 2 cbs (CBS_1part and CBS_2part) - becouse log have 10MB after zip'ing.
(must unpack CBS_1part and CBS_2part to one folder after that unpack CBS.log)

file other.zip have another files from CBS folder.

A:Windows update Error 80243004 and 800736B3

What on earth did you use to split the Zip files? I've tried 3 different tools, and all tell me the files are corrupt.

Please just zip two/3 files together and upload them separately, then do another 2/3 files.

http://www.sevenforums.com/windows-updates-activation/371744-windows-update-error-80243004-800736b3.html
Relevancy 74.39%

I have been stuck with this error for a bit and would like to get rid of the .NET 3.5.1 patch notices. CBS log attached for review.

Thanks for the help.

A:Windows Update: error 800736B3 with .NET 3.5.1 patch

Your CBS log did not come through:

http://www.sevenforums.com/windows-updates-activation/363882-windows-update-error-800736b3-net-3-5-1-patch.html
Relevancy 74.39%

Hello, I am having a small issue with Windows update. Windows 7 Home Premium, 64BIT OEM on HP Pavilion.

Window Update failing error code 800736B3

I have followed the SFC, update readiness, and clean boot procedures listed in the thread I linked above. I believe I have a SIMILAR issue (not the same).

Can anyone give me a light in the proper direction?

SFC found nothing, readiness tool ran and installed hotfix but did not fix issue. I also tried to install updates 1 at a time, to not avail, as well as the clean boot.

Based on my checksur log, I have the following:

Checking Package Watchlist
(f) CBS Watchlist Package Missing 0x80070002 Microsoft-Windows-Embedded-SKU-Foundation-Package~31bf3856ad364e35~amd64~~0.0.0.0 Microsoft-Windows-InternetExplorer-Package~31bf3856ad364e35~amd64~~10.2.9200.16521 Package registry presence failed, possibly an orphaned package on package watchlist

But I am unsure where to go or how to continue at this point. Any sugegstions?

http://www.sevenforums.com/windows-updates-activation/381411-update-error-800736b3-updates-failed.html
Relevancy 74.39%

Really struggling to fix Windows Vista update errors. There are 9 consistently failing important updates. I have followed all the scan and registry fix instructions but it seems to be making no difference.
Error number 800736B3 is shown then KB2803821. Please could someone help with a fix, I have attached the relevant screen shots and codes I think. (Added screen 1 and 2 showing better detail of the failed updates)
Thank you

A:Vista Update Error 800736B3 KB2803821

this forum is for windows 7 users, you will find the Vista forums here:
Vista Support Forums

http://www.sevenforums.com/windows-updates-activation/376315-vista-update-error-800736b3-kb2803821.html
Relevancy 74.39%

Vista Update Error 800736B3 KB2803821 Really struggling to fix Windows Vista update errors. There are 9 consistently failing important updates (plus it looks like many others on the attachments named screen?). I have followed all the scan and registry fix instructions but it seems to be making no difference.
Error number 800736B3 is shown then KB2803821. Please could someone help with a fix, I have attached the relevant screen shots and codes I think. (Added screen 1 and 2 showing better detail of the failed updates)
Its driving me mad, always trying to update them!
Thank you

A:Vista Update Error 800736B3 KB2803821

Please, there must be someone who can build a patch for this?

http://www.vistax64.com/windows-updates/303952-vista-update-error-800736b3-kb2803821.html
Relevancy 74.39%

Hi
You must get this a lot but I've tried every method mentioned before here.

I get this error when installing updates. Can someone guide me on how to troubleshoot it?

A:Windows Update Error Code 800736B3

What updates are you trying to install?

http://www.eightforums.com/windows-updates-activation/67057-windows-update-error-code-800736b3.html
Relevancy 74.39%

CBS.zip is attached. can anyone help with this error code. I cannot run windows update. This error code 800736B3 is the result every time. I have ran cmd spf scan, I have ran the window repair tools. Nothing will do it. Can someone please help?

A:Windows update error code 800736B3

Hello and welcome tenlakes mate I see you have done the sfc and I would suggest you run this as well if you haven't already
http://www.sevenforums.com/tutorials/433-disk-check.html < if necessary include the /f and /r in the command line as per Option2

just for another option you could run these they don't take long and will eliminate anything from that direction
http://www.superantispyware.com/
http://www.malwarebytes.org/products/malwarebytes_free/
http://www.bleepingcomputer.com/download/adwcleaner/
ADW download from bleeping computer delete any rubbish found with the malware scans
(NB If one is running Kaspersky security it may rant about ADW - just ignore it or disable Kaspersky while the ADW is being used)

http://www.sevenforums.com/windows-updates-activation/368372-windows-update-error-code-800736b3.html
Relevancy 74.39%

i run Windows 7 Ult 64bit w/PS1. My comps been running great, installing updates perfectly till now.. I have read alot of posts on this and i have tried everything that people have posted as remedies, but nothing seems to work. I am hoping i dont have to re-install Windows again, cause i just did it a week ago.. any help on this would be greatly appreciated

Operating System - MS Windows 7 Ultimate 64-bit SP1

CPU - Intel Core 2 Quad Q6600 @ 2.40GHz 38 ?C
Kentsfield 65nm Technology

RAM - 6.00 GB Dual-Channel DDR2 @ 332MHz (5-5-5-15)

Motherboard - Dell Inc. 0TP406 (CPU)

Graphics - DELL SE198WFP ([email protected])
1024MB GeForce GT 430 (nVidia) 36 ?C

Hard Drives - 313GB Seagate ST3320620AS (RAID) 37 ?C

Optical Drives - TSSTcorp DVD+-RW TS-H653B

Audio High - Definition Audio Device

A:Windows Update Error Code 800736B3

AS you have no replys, take a look at this link, do any of the methods in the accepted answer do anything for you.

Windows update fails to install updates with error code 800736B3 - Microsoft Answers

http://www.techsupportforum.com/forums/f217/windows-update-error-code-800736b3-606350.html
Relevancy 74.39%

Hi,

Whenever I try to run windows update it seems to fail, the error code i get is 800736B3.

I have followed the instructions and ran the hotfix and sfc scan however the problem still persists.

I have attached the files that i can, however when compressing the CBS folder it totals to 196MB so its impossible to upload here.

Any help would be much appreciated!

Thanks,

Tim

A:Windows Update Error Code: 800736B3

Hi,

I have now added a drop box link to the CBS folder:

https://www.dropbox.com/s/f920qsjxup5g4hk/CBS.zip?dl=0

Thanks,

Tim

http://www.sevenforums.com/windows-updates-activation/377776-windows-update-error-code-800736b3.html
Relevancy 74.39%

Hi,

This is my first post, and not all that clever with pcs, so apologies in advance if I've missed something out.

I have been getting this error code repeatedly when trying to install update KB2922229 for a couple of months now. Never had any problems before. Other updates were installing just fine, but I am now getting the same error code when trying to install update KB2871997. As both of these updates seem to be related to security, I am getting a bit concerned.

I have followed the steps in the Windows Update Posting Instructions, running SURT and an SFC scan. Logs attached.

Hope someone will be kind enough to help with this.

A:Windows Update Error Code 800736B3

I have never seen such a CheckSUR summary before!

Code:
Summary:
Seconds executed: 94
Found 6833 errors
Fixed 6833 errors
CSI Catalog Missing Total count: 7
Fixed: CSI Catalog Missing. Total count: 7
CSI Missing Component Key Total count: 927
Fixed: CSI Missing Component Key. Total count: 927
CSI Missing Pinned Component Key Total count: 15
Fixed: CSI Missing Pinned Component Key. Total count: 15
CSI Missing Identity Total count: 2026
Fixed: CSI Missing Identity. Total count: 2026
CSI Missing C Mark Total count: 1617
Fixed: CSI Missing C Mark. Total count: 1617
CSI Payload File Missing Total count: 24
Fixed: CSI Payload File Missing. Total count: 24
CSI F Mark Missing Total count: 2232
Fixed: CSI F Mark Missing. Total count: 2232
The SFC scan is clear - which in view of the above, is rather surprising.

Have you tried installing the updates again since running the CheckSUR/SURT?

If not, please do so, and let us know what happens - First do a check for Updates, and see if the updates appear at all - they may not.

http://www.sevenforums.com/windows-updates-activation/332755-windows-update-error-code-800736b3.html
Relevancy 74.39%

Hi, I've been receiving error code 800736b3 when trying to install 2 security updates and I don't know what the problem is.

A:Windows Update error code 800736b3

When this happens to me (just did - code 8007038) I install the updates one at a time.
Worked for me.

http://www.sevenforums.com/windows-updates-activation/334740-windows-update-error-code-800736b3.html
Relevancy 74.39%

Hi,

I'm stuck with 43 waiting updates and the update error 800736B3.
Tried now several approaches from the forum to get it resolved, but no resolution of the issue until now.

sfc /scannow reports no issues.

So I ran the upgrade pack to produce to cbs log.

Maybe one could give me a hint how or if it could be resolved somehow.

Thanks in advance.

Northseasurfer

A:Win 7 Prof. 64bit Update error 800736B3

There's no problems showing in any of the data files.
Please upload your C:\Windows\windowsupdate.log file.

http://www.sevenforums.com/windows-updates-activation/360820-win-7-prof-64bit-update-error-800736b3.html
Relevancy 73.53%

Hi.
I have a problem with Windows Update. It continues to fail with error code 800736B3. I have tried the update troubleshooter for Windows, I have ran scannow, I also have installed the update readiness tool and hotfix.
Still the updates fail.
I would greatly appreciate any help with this.
I have included the CBS flolder contents.
Thank you in advance for any insight!!!!!
Attachment 310809

Attachment 310811

Attachment 310812

Attachment 310813

Attachment 310814

Attachment 310815

Attachment 310819

Attachment 310820

Attachment 310821

A:Window Update failing error code 800736B3

CheckSUR shows this...

Code:
Unavailable repair files:
winsxs\manifests\msil_mscorlib.resources_b77a5c561934e089_6.1.7601.17648_en-us_6687c1de75c8e03a.manifest
winsxs\manifests\msil_mscorlib.resources_b77a5c561934e089_6.1.7601.21768_en-us_4fbc1bb28f6e72ee.manifest
I'll post a fix for it later - I have to get to work now

http://www.sevenforums.com/windows-updates-activation/325648-window-update-failing-error-code-800736b3.html
Relevancy 73.53%

I've been trying to solve this for a few months now but I haven't gotten anywhere. I've followed all the instructions here and they still continue to fail.

Windows Update Posting Instructions
I would really appreciate any insight as to what you think may be causing the issue, reformatting would really set me back since this computer has some industry specific CAD programs that are a pain to setup.

thanks again,Mark

For some reason I cant post an attachment &quot;attach button doesn't respond, in fact none of them do&quot;, I'll add a reply to the thread to see if I can then.

Update: Sorry about the missing attachments, I moved them out of the folder and forgot to attach, there are a couple of older CBS Persist files if you need them.

thanks

Mark

A:Window Update failing error code 800736B3

The error code 9C59 appeared when I tried to add Internet Explorer 11 to the update, prior to that it wasn't there.

http://www.sevenforums.com/windows-updates-activation/360726-window-update-failing-error-code-800736b3.html
Relevancy 73.53%

Hi.
I have a problem with Windows Update. It continues to fail with error code 800736B3. I have tried the update troubleshooter for Windows, I have ran scannow, I also have installed the update readiness tool and hotfix.
Still the updates fail.
I would greatly appreciate any help with this.

A:Window Update failing error code 800736B3

Please follow the Windows Update Posting Instructions and post the requested data

If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

http://www.sevenforums.com/windows-updates-activation/359540-window-update-failing-error-code-800736b3.html
Relevancy 73.53%

I have been experiencing trouble with Windows Update for some time I have important updates that do no install correctly I have spent the better found: 80070005 / Windows 800736B3 - Update Error(s) portion of yesterday and today trying to figure out a couple of issues that I'v had and this is the only one remaining but I haven't been able to get it fixed I have tried the Windows Update Troubleshooter I have tried disabling security software I have tried System Update Readiness Tool for Windows for x -based Systems I have tried CMD sfc scannow did not find any integrity violations I have tried CMD CHKDSK C R as Windows Update - Error(s) found: 800736B3 / 80070005 well as Microsoft NET Framework Repair Tool I doubt this is important but just in Windows Update - Error(s) found: 800736B3 / 80070005 case I will note that days ago I cloned my Windows Update - Error(s) found: 800736B3 / 80070005 hard drive and am now running off of the new one However this issue existed long before the clone Error s found are- Code B Code The important updates are- Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Update for Windows for x -based Systems KB Update for Windows for x -based Systems KB Update for Windows for x -based Systems KB

A:Windows Update - Error(s) found: 800736B3 / 80070005

Try these:
 
For Code 800736B3: http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_update/windows-update-error-code-800736b3-failes-to/98573891-eead-4257-8bf2-1fbac3f2a96a
Skip the SFC step and System Readiness steps, and try the clean boot and safe mode options.
 
For Code 80070005: http://answers.microsoft.com/en-us/windows/forum/windows_other-windows_update/windows-update-error-code-80070005/3b00bcc8-f44a-4134-af68-e727605ad647
There are links to a number of troubleshooting steps and some automated fix-it tools.

http://www.bleepingcomputer.com/forums/t/538324/windows-update-errors-found-800736b3-80070005/
Relevancy 72.67%

Hello I'm having a problem installing Windows Updates on my Windows Home Premium -bit PC - the update process ends with the error code B see attached screenshot I have tried following several suggested courses of action I obtained from several sources none of which has resolved the problem including Methods amp of Microsoft's Windows update error code B failes to install KB - Microsoft Community sfc scannow 800736B3 Update Code - 7 64-bit Error Home Windows Premium - gt no errors reported System Update Readiness Tool - gt downloaded installed successfully - no errors reported After running both of these restarted my PC and then tried to install the Windows updates again - no luck same Windows 7 Home Premium 64-bit Update - Error Code 800736B3 error reported So now I will see if anyone here can help me Thank-you very much in advance for any assistance you can provide Kevin p s the CBS zip file I created as per the Windows Update Posting Instructions was MB so too large to post There are several large cab files in that folder CbsPersist cab - can I exclude those from the zip file Edit Added CBS zip file with log files Windows 7 Home Premium 64-bit Update - Error Code 800736B3 only from C Windows Logs CBS folder

A:Windows 7 Home Premium 64-bit Update - Error Code 800736B3

I'm trying to figure out what exactly this error code means... it's not as easy to find like BSOD bugcheck codes, lol.

What updates failed exactly?

http://www.sevenforums.com/windows-updates-activation/364460-windows-7-home-premium-64-bit-update-error-code-800736b3.html
Relevancy 72.67%

Hi there,

I have a problem with Windows Update - it continually fails to install update KB2966583 (which is about 2.5MB) and brings up error code 800736B3. I have tried the update troubleshooter for Windows, the update readiness tool and hotfix.

Can anyone help me with this? Thanks in advance.

A:Windows Update KB2966583 fails, error code 800736B3

Please follow the Windows Update Posting Instructions and post the requested data
If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

http://www.sevenforums.com/windows-updates-activation/346121-windows-update-kb2966583-fails-error-code-800736b3.html
Relevancy 72.24%

I have been having Windows 7 update problems for several months.Primarily out of stubbornness I was determined to find the solution on my own.As a result of my arrogance I have spent countless hours trying every fix I can find on Microsoft as well as various online resources.All to no avail.So today I am reaching out for help.My goal of course is to get this machine to update but also to migrate it to Windows 10 at some point.

I do have a couple of questions about this process. First,I copied the CBS folder and zipped it but the file size is still a whopping 344mb.How do I get it to the required 8mb size?
Second,I have a screenshot of failed updates from several days ago-is that OK to post?
Thank you

A:Continual update failure codes,most often 80070643

Please follow the Windows Update Posting Instructions and post the requested data

If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

Please also post the C:\Windows\windowsudpate.log file

http://www.sevenforums.com/windows-updates-activation/378035-continual-update-failure-codes-most-often-80070643-a.html
Relevancy 71.81%

Windows 7 SP1 Home Premium.
I am no longer getting any security updates because the update for Windows Update fails with Error Code 800736B3.

SFC /SCANNOW reports no errors.
C:\Windows\system32>sfc /scannow
Beginning system scan. This process will take some time.
Beginning verification phase of system scan.
Verification 100% complete.
Windows Resource Protection did not find any integrity violations.

I have attached the CBS folder without the CbsPersist.cab files.

I have already tried the Microsoft KB How to update the Windows Update Agent to the latest version

Attachment 333503

A:Windows Update Agent 7.6.7600.320 Fails - Error Code 800736B3

There's nothing apparently amiss in any of the uploaded files.
Please upload the CBSPersist files, and the C:\Windows\windowsupdate.log file

http://www.sevenforums.com/windows-updates-activation/345786-windows-update-agent-7-6-7600-320-fails-error-code-800736b3.html
Relevancy 71.38%

I've had this custom PC for a little while, since the Christmas before last, and for a while it had been working fine. But around January of this year I started getting BSOD's all over the place, most of the time them all with different error codes. The only thing that's the same about them is they all point to ntoskrnl.exe being the failure. I'm not sure what that's supposed to mean, so I'd like to get some support on this issue. The most recent crash that happened about 10 minutes ago was:

IRQL_NOT_LESS_OR_EQUAL.
0x0000000a
fffff683`ff738be0
00000000`00000000
00000000`00000000
fffff800`030955b7

A:Constant BSOD's, all different error codes. 0x0000000a

Overclocking
If you are overclocking any hardware, STOP. Reset any changed values back to default.

Basic checks:
Please run these tests and report back the results

1. SFC /scannow to check windows for corruption - SFC /SCANNOW Command - System File Checker
2. Disk check for errors on the hard drive - How to Run Disk Check in Windows 7
3. Troubleshoot applications by a clean boot - Troubleshoot Application Conflicts by Performing a Clean Startup
4. Memtest86+ paying close attention to part 3 - RAM - Test with Memtest86+
5. Hard drive test from HDD mfg website - Hard Drive Diagnostic Procedure

Check for a BIOS update.

Code:
BIOS Version/Date American Megatrends Inc. 5.16, 6/3/2010
If you continue to get BSOD's run driver verifier.
Driver Verifier
Let's run driver verifier and see if it catches any misbehaving drivers: Driver Verifier - Enable and Disable

http://www.sevenforums.com/bsod-help-support/291032-constant-bsods-all-different-error-codes-0x0000000a.html
Relevancy 69.66%

Hello I ve been having constant BSOD s ever since Each error code seems to be differant Here are the steps I ve taken and the information I have so far On the th I began getting even BSOD Constant with reformat. Solved: random after error codes, the BSOD s mainly when doing something seemingly PC intensive AKA Battlefield However it also BSOD d while I Solved: Constant BSOD with random error codes, even after reformat. was simply sitting on my desktop as well The BSOD error codes seem to be nearly random So i started writing them down as I saw them BAD POOL CALLER BUGCODE USB DRIVER IRQL NOT LESS OR EQUAL PAGE FAULT IN UNPAGED AREA SYSTEM SERVICE EXCEPTION MEMORY MANAGEMENT Solved: Constant BSOD with random error codes, even after reformat. The steps I took in solving it that day was - Disable tweaks on my PC and uninstall rescent programs that were installed - Rollback the rescent video driver I installed from NVIDIA - Did a system restore to the st - Ran multiple Antiviruses including Avast and ESET Only thing picked up was a couple of uninstalled quot unwanted software quot which was cleaned None of these steps seemed to fix anything so I gave up for the night next morning after BSODing a couple more times I decided I would reformat Windows After going through a full reformat I let windows install all the drivers except for my video drivers which i got the latest version from Geforce com After launching Battlefield playing for maybe minutes I BSOD At this point I m convinced its a hardware issue However I have no idea how to go about figuring out which piece of hardware it would be Based on some information on google I decide to run a memtest- After completing the test I had zero errors A perfect pass At this point I m coming online for help in solving this issue I will gladly run any safe test as well as use programs like teamviewer to let people get a more in-depth look at the issue My computer is custom built with parts from newegg Their only about a month old so their all still within newegg warranty I need to figure out what piece of hardware is causing this issue My PC Specs are as follows OPERATING SYSTEM Windows Ultimate -bit CPU TYPE AMD Phenom tm II X Processor CPU SPEED GHz SYSTEM MEMORY GB VIDEO CARD MODEL NVIDIA GeForce GTX VIDEO CARD MEMORY GB DESKTOP RESOLUTION x HARD DISK SIZE TB DOWNLOAD SPEED MB s mbps nbsp

A:Solved: Constant BSOD with random error codes, even after reformat.

https://forums.techguy.org/threads/solved-constant-bsod-with-random-error-codes-even-after-reformat.1023993/
Relevancy 69.66%

Hello,

About every other boot, I get a BSOD for one reason or another. Sometimes, no BSOD will show up, but the comp. will loop through the welcome screen, meaning the welcome screen will show but will not displays user accounts and then it will turn black and back to the welcome screen again.

Disk checks haven't pulled up anything.
I've done virus scans with Kaspersky I.S. 2012, and Malwarebytes several times and there doesn't seem to be a virus involved.

Many Thanks,
devalonski

A:Constant BSOD over the past two week, varying error codes

Welcome

Your msinfo file is corrupted

Please upload your msinfo32.nfo file. To get this:
Click on the Start
Type msinfo32 into the Search programs and files box
When it opens, go to File, Save
Save as msinfo32.nfo and save in a place you will remember
Let it finish the process of gathering and saving the system info
Right click the .nfo file, click send to compressed (zipped) folder
Upload the .zip file here.

PS: Kaspersky itself causes blue screens on some systems

http://www.sevenforums.com/bsod-help-support/255777-constant-bsod-over-past-two-week-varying-error-codes.html
Relevancy 69.66%

Hey guys. Been experiencing seemingly random BSOD's for the past few weeks, and completely unable to solve the problem myself. It happens from a minute or two after startup to after 3 or 4 hours or working, and sometimes doesn't crash on intensive apps like Furmark.

I'm running a Lenovo Y400 with the newest Nvidia drivers, and have attempted rolling back and uninstalling with DDU but no success.

Any help would be very greatly appreciated, I'm sitting in the middle of exams with a timebomb computer.

A:Constant BSOD randomly, various error codes, Nvidia Issue?

Sorry for thedelay in responding. There just aren't that many people who do BSOD analysis,so at times we get a bit overwhelmed!

All your latest driver verifier dumpfiles blames Probably caused by : nvlddmkm.sys ( nvlddmkm+cbb76 ).

This is as you mentioned the driver for your nvdia card.

But you have a Lenovo Y400 and it seems that your model has customized drivers from Lenovo. Uninstall your current nvdiadriver and install the windows 8.1 driver from Lenovo from here Drivers and software - IdeaPad Y400 Notebook

Advice: install also all the other windows 8.1 drivers for your system.
Daemon Tools (and Alcohol % software) are known to cause BSOD's on some Windows systems (mostly due to the sptd.sysdriver, although I have seen dtsoftbus01.sys blamed on several occasions).
It is known that daemon tools sometimes also causes problems with graphics /video.

Please un-install the program, then use the following free tool to ensure that the troublesome sptd.sys driver is removed from your system (pick the 32 or 64 bit system depending on yoursystem's configuration): New link (15 Aug 2012): DuplexSecure - Downloads(pick the appropriate version for your system and select "Un-install"when you run it).
Alternate link: Disk-Tools.com
Manual procedure here: Registry and SPTD problems | DAEMONPro Help

(from canned speech of John Carrona)

http://www.eightforums.com/bsod-crashes-debugging/47213-constant-bsod-randomly-various-error-codes-nvidia-issue.html
Relevancy 68.8%

HP Pavilion Media Center Media Win 7 BSOD Error m8000 Pavilion Various HP Codes Constant Center m Windows Home Premium Bit Originally Vista Home Premium Constant BSOD HP Pavilion Media Center m8000 Various Error Codes Win 7 Architecture Unknown - I Assume Bit Also Full Retail Upgrade Version Hardware I Was Told is - Years Old OS Installed Weeks Ago I'm hoping someone can help me with this issue This PC was given to me by my stepson's cousin to look at after they had spent lots of time and trying to get it fixed According to them it was working fine with Vista Home Premium for several years until they installed Vista SP This sounds like the opposite of what I would expect The system was running with all RAM slots filled x and x GB for a total of GB Apparently after or around installing Vista SP they started getting BSOD frequently Eventually they brought it into Best Buy and there were sold Windows Home Premium Upgrade which did not help the problem They gave it to me to look at a couple of weeks ago The system had been purchased with hard drives so I removed the one Windows was installed on and attempted to do a fresh clean install of Windows Home Premium on to the other hard drive from the Windows disc they had purchased This was unsuccessful for several attempts until I removed all peripherals and all of the RAM except one GB stick I took all of that stuff out to minimize points of failure At the time I got it to work I assumed that I was either dealing with a faulty memory module or slot However since installing and updating Windows it will still give me the BSOD with various RAM configurations It doesn't seem to matter which sticks I use or which slots they are in The only thing that SEEMS to work OK is only having GB in use after I go over that is when the problems start I still have not put back in any PCI cards or connected any front panel wiring this thing has a ton of that too - USB Firewire and A V inputs to name a couple So to make a long story short at this point I'm thinking bad MB or a boot sector virus if those even exist lol - something I've never been able to determine definitively Also it only has a W PSU - I assume that GB of ram had been added to the system since it comes standard with according to HP's specs The most frequent stop error I'm seeing is quot Page Fault In Non Paged Area quot but there are others Anyway I've taken different snapshots with the software you have here and uploaded the info The first I took earlier tonight and had logged about unexpected shutdowns since I installed Windows weeks ago I've only had the system on every - days The second I took after I caused a BSOD trying to run the quot Windows Experience quot benchmark It also BSOD'd while I was attempting to run the snapshot which should be reflected in the second one I only remembered to get the quot perfmon report quot with the second one Later it BSOD'd twice while I was writing this on another PC and it was just sitting there doing nothing I'm generally pretty good with computers but basically I'm trying to figure out if this thing is worth fixing it sure seems to be hardware I'm not great at reading all of these logs and stuff so hopefully one of you can point me in the right direction Thanks in advance Mike

A:Constant BSOD HP Pavilion Media Center m8000 Various Error Codes Win 7

Does anyone have any suggestions?

http://www.sevenforums.com/bsod-help-support/193463-constant-bsod-hp-pavilion-media-center-m8000-various-error-codes-win-7-a.html
Relevancy 67.51%

Windows BACKUP AND RESTORE FAILURE with error codes x and x Could you please have a look to the following screenshots together with the lt JUNCTION gt results in order to advice how can I TO SOLVE Windows BACKUP AND RESTORE FAILURE http www sevenforums com attachments backup-restore d -windows- -backup-restore-failure-error-codes- zyzozk jpg png http www sevenforums com attachmen amp d FILE NOT FOUND http codes 7 error RESTORE Windows AND BACKUP with FAILURE www sevenforums com attachmen amp d JUNCTION RESULTS Volume in drive C is OS Install Volume Windows 7 BACKUP AND RESTORE FAILURE with error codes Serial Number is E C- Directory of c Users msi AM lt JUNCTION gt Application Data C Users msi Windows 7 BACKUP AND RESTORE FAILURE with error codes AppData Roaming AM lt JUNCTION gt Cookies C Users msi AppData Roaming Microsoft Windows Cookies AM lt JUNCTION gt Local Settings C Users msi AppData Local AM lt JUNCTION gt My Documents C Users msi Documents AM lt JUNCTION gt NetHood C Users msi AppData Roaming Microsoft Windows Network Shortcuts AM lt JUNCTION gt PrintHood C Users msi AppData Roaming Microsoft Windows Printer Shortcuts AM lt JUNCTION gt Recent C Users msi AppData Roaming Microsoft Windows Recent AM lt JUNCTION gt SendTo C Users msi AppData Roaming Microsoft Windows SendTo AM lt JUNCTION gt Start Menu C Users msi AppData Roaming Microsoft Windows Start Menu AM lt JUNCTION gt Templates C Users msi AppData Roaming Microsoft Windows Templates File s bytes Directory of c Users msi AppData Local AM lt JUNCTION gt Application Data C Users msi AppData Local AM lt JUNCTION gt History C Users msi AppData Local Microsoft Windows History AM lt JUNCTION gt Temporary Internet Files C Users msi AppData Local Microsoft Windows Temporary Internet Files File s bytes Directory of c Users msi AppData Local Application Data AM lt JUNCTION gt Application Data C Users msi AppData Local AM lt JUNCTION gt History C Users msi AppData Local Microsoft Windows History AM lt JUNCTION gt Temporary Internet Files C Users msi AppData Local Microsoft Windows Temporary Internet Files File s bytes Directory of c Users msi AppData Local Application Data Application Data AM lt JUNCTION gt Application Data C Users msi AppData Local AM lt JUNCTION gt History C Users msi AppData Local Microsoft Windows History AM lt JUNCTION gt Temporary Internet Files C Users msi AppData Local Microsoft Windows Temporary Internet Files File s bytes Directory of c Users msi AppData Local Application Data Application Data Application Data AM lt JUNCTION gt Application Data C Users msi AppData Local AM lt JUNCTION gt History C Users msi AppData Local Microsoft Windows History AM lt JUNCTION gt Temporary Internet Files C Users msi AppData Local Microsoft Windows Temporary Internet Files File s bytes Directory of c Users msi AppData Local Application Data Application Data Application Data Application Data AM lt JUNCTION gt Application Data C Users msi AppData Local AM lt JUNCTION gt History C Users msi AppData Local Microsoft Windows History AM lt JUNCTION gt Temporary Internet Files C Users msi AppData Local Microsoft Windows Temporary Internet Files File s bytes Directory of c Users msi AppData Local Application Data Application Data Application Data Application Data Application Data AM lt JUNCTION gt Application Data C Users msi AppData Local AM lt JUNCTION gt History C Users msi AppData Local Microsoft Windows History AM lt JUNCTION gt Temporary Internet Files C Users msi AppData Local Microsoft Windows Temporary Internet Files File s bytes Directory of c Users msi AppData Local Application Data Application Data Application Data Application Data Application Data Application Data AM lt JUNCTION gt Application Data C Users msi AppData Local AM lt JUNCTION gt History C Users msi AppData Local Microsoft Windows History AM lt JUNCTION gt Temporary Internet Files C Users msi AppData Local Microsoft Windows Temporary Internet Files File s bytes Directory of c Users msi AppData Loc... Read more

A:Windows 7 BACKUP AND RESTORE FAILURE with error codes

Something is "broken" in your installation of Windows. Without knowing the full particulars of your installation, and exactly the steps you took to get to where the errors occurred, it's doubtful you can get backup working unless somebody here with expertise in Windows backup spends some time with you tracking everything down. If possible, reinstall Windows, using common procedures and disk configurations. Another option is to use a different backup tool.
Free Macrium is one, and there are others here that people recommend. It may seem "right and proper" to get Windows backup working correctly, but unless you're a "technical" who just won't give up, it's really unnecessary.
Other backup tools are simply better working and less prone to failure. I'm a "technical" but wouldn't waste time with Windows shadow copy service problems unless it was part of my job. Unless you are compelled to use Windows shadow copy services by some specific need, it's much simpler to use other software for backups and images.
I never learned about Windows shadow copy services, so I can't help you with that.
Maybe one of the people here who swear by Windows backup will help you clear up your problem.
That would be nice.

http://www.sevenforums.com/backup-restore/291403-windows-7-backup-restore-failure-error-codes.html
Relevancy 66.65%

Hope Everyone had a Great Christmas!
Let me start with This is a new build (about my 10th)

All looked good until I got to the last 6 updates, then they started to fail.
I've also just noticed that IE will crash randomly.

I've gone through SURT A couple times, tried a UPGRADE to reinstall , and also did another New install.
about every "Fix it" you can find with 10 hours of Google searches and frustration .

I've had a list of errors
8007000d
9c59
8024200d

and the that two that currently have me stumped

800b0100
8007065e

SFC /SCANNOW returned with WRP did not find any integrity violations.

Edit, Attached PS of updates that are not working.

A:Update Errors 800b0100, 8007065e.

There's no significant errors in any of the posted logs.

Please post the C:\Windows\windowsupdate.log file.

http://www.sevenforums.com/windows-updates-activation/356510-update-errors-800b0100-8007065e.html
Relevancy 64.93%

Hello users of the forum Description of the problem I'm using Windows bit on my new system (800B0100; Issues 8007065E; KB947821) Win7 Update and I've been encountering issues with the Windows Live update I have updates labeled important ready to install but unfortunately Win7 Update Issues (800B0100; 8007065E; KB947821) I recieve error codes B and E whenever I try installing them I've found no information on the E code however I've been told to run the CheckSUR when encountering B error code I downloaded the CheckSUR and ran it and it wanted to install the KB update which as far as I Win7 Update Issues (800B0100; 8007065E; KB947821) understand is a hotfix to help with errors encountered when running the Windows Live Update The hotfix has been successfully installed several times however my issues with the updater persists and thus I seek help in this thread Narrowed down information Programs I am having problems with Windows Windows Live Update CheckSUR Error messages Windows Win7 Update Issues (800B0100; 8007065E; KB947821) Update Error B If you receive the Windows Update error b it means that a file needed byWindows Update is corrupted or missing The System Update Readiness Tool can correct some conditions that cause this error Windows Update Error E No information about this error Recent changes you made to my computer None system is new Basic motherboard and VGA drivers installed What I have already tried to fix the problem Running the CheckSUR rebooting and attempting to run Windows Live Update again Below is the Log found in Windows Logs CBS CheckSUR Code Checking System Update Readiness Binary Version Package Version - - Checking Windows Servicing Packages Checking Package Manifests and Catalogs f CBS MUM Corrupt x F servicing Packages Package for KB bf ad e amd mumLine f CBS Catalog Corrupt x B servicing Packages Package for KB bf ad e amd cat f CBS MUM Corrupt x F servicing Packages Package for KB bf ad e amd mumLine f CBS Catalog Corrupt x B servicing Packages Package for KB bf ad e amd cat f CBS MUM Corrupt x F servicing Packages Package for KB bf ad e amd mumLine f CBS Catalog Corrupt x B servicing Packages Package for KB bf ad e amd cat f CBS MUM Corrupt x F servicing Packages Package for KB bf ad e amd mumLine f CBS Catalog Corrupt x B servicing Packages Package for KB bf ad e amd cat f CBS MUM Corrupt x F servicing Packages Package for KB bf ad e amd mumLine f CBS Catalog Corrupt x B servicing Packages Package for KB bf ad e amd cat f CBS MUM Corrupt x F servicing Packages Package for KB bf ad e amd mumLine f CBS Catalog Corrupt x B servicing Packages Package for KB bf ad e amd cat f CBS MUM Corrupt x F servicing Packages Package for KB bf ad e amd mumLine f CBS Catalog Corrupt x B servicing Packages Package for KB bf ad e amd cat f CBS MUM Corrupt x F servicing Packages Package for KB bf ad e amd mumLine f CBS Catalog Corrupt x B servicing Packages Package for KB bf ad e amd cat f CBS MUM Corrupt x F servicing Packages Package for KB bf ad e amd mumLine f CBS Catalog Corrupt x B servicing Packages Package for KB bf ad e amd cat f CBS MUM Corrupt x F servicing Packages Package for KB bf ad e amd mumLine f CBS Catalog Corrupt x B servicing Packages Package for KB bf ad e amd cat f CBS MUM Corrupt x F servicing Packages Package for KB bf ad e amd mumLine f CBS Catalog Corrupt x B servicing Packages Package for KB bf ad e amd cat f CBS MUM Corrupt x F servicing Packages Package for KB bf ad e amd mumLine f CBS Catalog Corrupt x B servicing Packages Package for KB bf ad e amd cat f CBS MUM Corrupt x F servicing Packages Package for KB bf ad e amd mumLine f CBS Catalog Corrupt x B servicing Packages Package for KB bf ad e amd cat f CBS MUM Corrupt x F servicing Packages Package for KB bf ad e amd mumLine f CBS Catalog Corrupt x B servicing Packages Package for KB bf ad e amd cat f CBS MUM Corrupt x F servicing Packages Package for KB RTM bf ad e amd mumLine f CBS Catalog Corrupt x B servicing Packages Package for KB ... Read more

A:Win7 Update Issues (800B0100; 8007065E; KB947821)

I looked up one update... KB2249857




Quote:
using a disk drive that is greater than or equal to two terabytes


Update for Windows 7 (KB2249857) - Calendar Of Updates

http://www.sevenforums.com/windows-updates-activation/144389-win7-update-issues-800b0100-8007065e-kb947821.html
Relevancy 64.5%

Hi,
Starting recently I get persistent Windows Update errors (800B0100 and 8007065E) after each update (Windows 7 Pro, 32-bit). From reading previous posts and looking at the CheckSUR log, I believe the cause is missing and/or corrupted manifest/catalog files.

I have attached CheckSUR's log in the hope someone can help. As you can see, many of the files required for repair are reported as missing, and I do not have any other 32-bit Windows 7 machines around to retrieve them from and copy them back manually.

If anyone has any suggestions for how to replace these files, it would be greatly appreciated? Thanks!

-Adrian

A:Persistent Windows Update errors 800B0100 and 8007065E - CheckSUR

We really need the CBS.log as well - please follow the Windows Update Posting Instructions and post all the requested data.

Here's the summary of your problems according to your CheckSUR log


Code:
Unavailable repair files:
winsxs\manifests\msil_system_b77a5c561934e089_6.1.7601.17966_none_aef0fb4c1897386e.manifest
winsxs\manifests\msil_system.directoryservices_b03f5f7f11d50a3a_6.1.7601.17966_none_2aff7445ee11ac8b.manifest
winsxs\manifests\x86_4dd4cbdf1a780ab7c8b34e06e85c63d4_31bf3856ad364e35_8.0.7601.22272_none_bfe9c438efb6a8bd.manifest
winsxs\manifests\msil_system.drawing.resources_b03f5f7f11d50a3a_6.1.7601.17966_en-us_bd82a55ef3ca6a25.manifest
winsxs\manifests\msil_system.windows.forms_b77a5c561934e089_6.1.7601.17966_none_054d082500298a66.manifest
winsxs\manifests\msil_system.directoryser..protocols.resources_b03f5f7f11d50a3a_6.1.7601.22126_en-us_c4c059e96bb0e641.manifest
winsxs\manifests\msil_system.directoryservices.protocols_b03f5f7f11d50a3a_6.1.7601.17966_none_837b7fa210fd83d6.manifest
winsxs\manifests\x86_dbfa863764c24abcb7df80cd3c4e9752_31bf3856ad364e35_8.0.7601.22272_none_d67413697f9800a0.manifest
winsxs\manifests\msil_system.design.resources_b03f5f7f11d50a3a_6.1.7601.17966_en-us_15c4ebe4bb4d6503.manifest
winsxs\manifests\msil_system.drawing.resources_b03f5f7f11d50a3a_6.1.7601.22126_en-us_a6b100a10d755f1d.manifest
winsxs\manifests\x86_6a82342f04c8b4523c8b48d300eccc77_31bf3856ad364e35_8.0.7601.18106_none_97c88b1d0d56a13e.manifest
winsxs\manifests\msil_system.windows.forms_b77a5c561934e089_6.1.7601.22126_none_ee7b636719d47f5e.manifest
winsxs\manifests\x86_1744800d3cdf16eb68914b849bd982e5_31bf3856ad364e35_8.0.7601.22272_none_674fdfbf2c7cbb04.manifest
winsxs\manifests\msil_system.directoryservices.resources_b03f5f7f11d50a3a_6.1.7601.17966_en-us_0dbb286c9035e5e2.manifest
winsxs\manifests\x86_d1a98589f0861b61e852bca007d96e76_31bf3856ad364e35_8.0.7601.22272_none_1e8769deeee42319.manifest
winsxs\manifests\msil_system.directoryservices_b03f5f7f11d50a3a_6.1.7601.22126_none_142dcf8807bca183.manifest
winsxs\manifests\msil_system.design_b03f5f7f11d50a3a_6.1.7601.17966_none_89ab3041bfbe7442.manifest
winsxs\manifests\msil_system.directoryservices.protocols_b03f5f7f11d50a3a_6.1.7601.22126_none_6ca9dae42aa878ce.manifest
winsxs\manifests\msil_system.security.resources_b03f5f7f11d50a3a_6.1.7601.17966_en-us_54478083274d7e61.manifest
winsxs\manifests\msil_system.design.resources_b03f5f7f11d50a3a_6.1.7601.22126_en-us_fef34726d4f859fb.manifest
winsxs\manifests\x86_netfx-mscorjit_dll_b03f5f7f11d50a3a_6.1.7601.22126_none_7cec344c07796fb4.manifest
winsxs\manifests\msil_system.windows.forms.resources_b77a5c561934e089_6.1.7601.17966_en-us_b753ed75afa97007.manifest
winsxs\manifests\msil_system.drawing_b03f5f7f11d50a3a_6.1.7601.17966_none_63f45ffcad739b6e.manifest
winsxs\manifests\x86_d4c0f93defde4c3fc9c34ecf2c9278e1_31bf3856ad364e35_8.0.7601.18106_none_d28bc3f4ea89956d.manifest
winsxs\manifests\x86_39212bea94c9b3b94e61ab9562070cf8_31bf3856ad364e35_8.0.7601.22272_none_6da55195d3fee11b.manifest
winsxs\manifests\x86_netfx-peverify_dll_b03f5f7f11d50a3a_6.1.7601.17966_none_70f7a7d106760681.manifest
winsxs\manifests\x86_4331cf3fa1e70988487cf48684ed90bf_31bf3856ad364e35_8.0.7601.22272_none_54df1f70d962b156.manifest
winsxs\manifests\x86_00412a01f21c678edf9dad854e8cf8d2_31bf3856ad364e35_8.0.7601.22272_none_91d1534f0cd9412c.manifest
winsxs\manifests\x86_a8f49624bf43eba1ff7812b88586cae4_31bf3856ad364e35_8.0.7601.18106_none_dd58a9b034abc291.manifest
winsxs\manifests\x86_2eb98caa1ead4e8b63c52d322348d9dd_31bf3856ad364e35_8.0.7601.18106_none_17c6730d3db24e94.manifest
winsxs\manifests\x86_294deaa6db815ac5c4dc9f945b2ecd9f_31bf3856ad364e35_8.0.7601.18106_none_e3f7f8da04bece3c.manifest
winsxs\manifests\msil_system.design_b03f5f7f11d50a3a_6.1.7601.22126_none_72d98b83d969693a.manifest
winsxs\manifests\msil_system.security.resources_b03f5f7f11d50a3a_6.1.7601.22126_en-us_3d75dbc540f87359.manifest
winsxs\manifests\x86_047cb7d311... Read more

http://www.sevenforums.com/windows-updates-activation/289948-persistent-windows-update-errors-800b0100-8007065e-checksur.html
Relevancy 64.07%

I will start from the beginning A mate rang me to ask if i could fix his laptop but i was away on holiday atm told him to check some local computer stores So he did and got a local computer 9 Update IE codes WU won't Error 10 - and to fix his laptop for him When i WU won't Update IE 9 and 10 - Error codes returned to holiday i rang him to see what was fixed on his laptop and how is it running he said its fixed the store said the hard drive had bad sectors and they fixed them But slow at times and windows update is running every night So i picked up his laptop this weekend I've replaced the HD with a SSD used the Samsung migration tool came with it Ran a Disk Check WU won't Update IE 9 and 10 - Error codes on it to fix any errors that was copied across Then i looked at the Windows Update issue I noticed it was WU won't Update IE 9 and 10 - Error codes stuck on updates for IE I checked what version was installed which was Thou WU still wanted to installed version and version Tried to uninstall version but wouldn't let me saying Not all of the updates were successfully installed So i came here read your Windows Update Posting Instructions Follows the steps there Ran SURT and did a sfc scan The errors are Code C and Code C IE and IE What can i do to fix this

A:WU won't Update IE 9 and 10 - Error codes

Having problems uploading the CBS Log, it's too big for single file upload, so i split it into 3 parts, but still won't load. So i uploaded to a website and posted the link here.

CBS Log

http://www.sevenforums.com/windows-updates-activation/305762-wu-wont-update-ie-9-10-error-codes.html
Relevancy 64.07%

Microsoft NET Framework Service Pack Security Update for Windows Windows XP Windows Vista Windows Server Windows and Windows Server R KB Download size MB You may need to restart your computer for this update to take effect Update type Important A error Update codes!!!!! security issue has been identified that could allow an unauthenticated remote attacker to compromise your system and gain control over it You can help protect your system by installing this update from Microsoft After you install this update you may have to restart your system More information http go microsoft com fwlink LinkID Help and Support http support microsoft com Security Update for Microsoft Update error codes!!!!! Office Visio Viewer KB Download size MB You may need to restart your computer for this update to take effect Update type Important A security vulnerability exists in Microsoft Office Visio Viewer that could allow arbitrary code to run when a maliciously modified web page is opened This update resolves that vulnerability More information http support Update error codes!!!!! microsoft com kb Help and Support http support microsoft com LN en-us Security Update for the Microsoft Office System KB Download size MB You may need to restart your computer for this update to take effect Update type Important A security vulnerability exists in the Microsoft Office System that could allow arbitrary code to run when a maliciously modified file is opened This update resolves the vulnerability so that the Microsoft Office System documents are handled appropriately More information http support microsoft com kb Help and Support http support microsoft com LN en-us Security Update for the Microsoft Office System KB Download size KB You may need to restart your computer for this update to take effect Update type Important This update resolves a problem that can cause programs that use the Outlook View Control with Forms such as Microsoft Office Outlook with Business Contact Manager to stop functioning as expected after Security Update for Microsoft Office Outlook KB is installed More information http support microsoft com kb Help and Support http support microsoft com LN en-us So my system is prompting me to install these updates but every time I do I get these error codes WindowsUpdate quot quot WindowsUpdate dt quot WindowsUpdate quot quot WindowsUpdate dt Does anyone know what this means And how can I correct this problem

A:Update error codes!!!!!

Try this site - look down to near the end for the easiest fix:
http://social.technet.microsoft.com/...7-b8ebe9e9a1cd

http://www.techsupportforum.com/forums/f217/update-error-codes-422934.html
Relevancy 63.21%

Hi,
I am using window 8.1 enterprise 64 bit
i update intel coporation driver update for intel Hd graphics released on 28/july/16
Problem>>>> Error code 80070103 with fail to update.

Thanks

https://social.technet.microsoft.com/Forums/en-US/08407642-46dd-4374-ba2a-8cd0d976be64/error-80070103?forum=w8itprogeneral
Relevancy 63.21%

I've had an ongoing windows update issue that has finally irritated me enough to try to resolve it I'm unable to install IE or They both download and attempt to install but upon reboot to finalize the update windows gets anywhere between - percent done and starts a never codes windows Several error update ending rebooting cycle Windows update log shows all my attempts at installing either IE as quot successful quot so I have no codes but I assure you it isn't successful Also I've tried downloaded and installing them manually to the same result I also have similar issues with other updates but they show as quot Several windows update error codes failed quot and actually Several windows update error codes give me codes They are as follows Platform Update for Windows x -Edition KB Error details Code F Security Update for Windows for x -based Systems KB Error details Code AA Update for Microsoft XML Core Services Service Pack for x -based Systems KB Error details Code I've run SFC with the scannow command which found no problems I've run the System Update Readiness Tool to completion but didn't seem to resolve anything I've also run the windows update diagnostic tool which ends with this result Attachment I can't compress my cbs folder under MB so I can't upload my folder MB limitation I've posted a screenshot of my folder in hopes I have unnecessary files I can delete in order to reach the MB mark Attachment I hope I've covered everything I apologize for the lengthy post and the plethora of problems but I'm trying to help you help me - P S I'd also like to note that I attempted to install these updates in safe mode and clean boot mode with no improvement

A:Several windows update error codes

Please delete the older CBSPersist files - from the zipped file, rather than the store.
They should the fit

http://www.sevenforums.com/windows-updates-activation/317756-several-windows-update-error-codes.html
Relevancy 63.21%

I cannot install the updates: Security Update for Microsoft Silverlight (KB2668562), Update for Microsoft .NET Framework 4 (KB2468871), and Security Update for Microsoft Visual C++ 2010 Redistributable Package (KB2467173).
I have tried restarting, re installing .netframework 4, and downgrading to 3.5 then retrying.
I have researched these errors and most of them are solved by re installing or downgrading then retrying but that hasnt worked for me. I did have a third party theme installed and used universal theme patcher. I restored the three patched files but still nothing works. I also have noticed when I apply a "stock" theme such as an aero theme my start orb doesnt change back to the original one. A screen shot is attached. Please help!!

A:Windows Update Error Codes 64C and 643

Update: I installed the silverlight update but still the other two wont work.
KB2468871 error 643
KB2467173 error 64C
Please somebody help me

http://www.sevenforums.com/windows-updates-activation/215739-windows-update-error-codes-64c-643-a.html
Relevancy 62.78%

Hello everyone, I am tring to install 2 optional updates on my Windows 7 computer. They are Intel Corporation- Graphics Adapter WDDM1.1 Graphics Adapter WDDM1.2- Intel HD Graphics and the second is Intel Corporation- Storage Controller- Intel Desktop/Workstation/Server Express Chipset SATA AHCI Controller. The update always fails and shows Code 80070103. I have run error checking on the drive, booted in safe mode (Windows Update does not work in Safe Mode) and tried Diagnostic staup and I still get the same error. Does anyone know how to fix this? Thanks in advance for everyones help!!!
 

A:Error Code 80070103

hiya, personally I go directly to makers web site and download from there, tick the optional update right-click on it and select hide, will not offer to download again
 

https://forums.techguy.org/threads/error-code-80070103.1099363/
Relevancy 62.78%

Hello I have just recently built a gaming Error On Windows Codes Update Multiple machine and I have had this problem ever since I first installed Windows Home Premium x When ever I try to update I get error codes B and I have tried Windows Fix-It and SFC I have also noted that most of my problems are with security updates Here is the list of updates that my computer cannot seem to complete Cumulative Security Update for Internet Explorer for Windows for x -based Systems KB Security Update for Microsoft NET Framework on Windows and Windows Server R SP for x -based Systems KB Security Update Multiple Error Codes On Windows Update for Microsoft NET Framework on Windows and Windows Server R SP for x -based Systems KB Security Update for Microsoft NET Framework on Windows and Windows Server R SP for x -based Systems KB Security Update for Microsoft NET Framework on Windows and Windows Server R SP for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x Multiple Error Codes On Windows Update -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Update for Windows for x -based Systems KB Update for Windows for x -based Systems KB Update for Windows for x -based Systems KB Update for Windows for x -based Systems KB Update for Windows for x -based Systems KB Update for Windows for x -based Systems KB Update for Windows for x -based Systems KB Update for Windows for x -based Systems KB Update for Windows for x -based Systems KB Update for Windows for x -based Systems KB Update for Windows for x -based Systems KB Windows Internet Explorer delivers web sites and applications that look and perform like native PC applications through the power of Windows Information on my PC i ASUS Rampage IV Extreme Corsair Vengence GB Mhz EVGA GTX SLI Corsair H HAF- Thank you in advance - Michael W Flaherty

A:Multiple Error Codes On Windows Update

Welcome,

Lets start by following the instructions in this tutorial:

Windows Genuine and Activation Issue Posting Instructions

Regards,
Golden

http://www.sevenforums.com/windows-updates-activation/244132-multiple-error-codes-windows-update.html
Relevancy 62.78%

Ok so I have been trying to fix these error codes 80073712 and 800B0100 for days and days on end now... I have tried pretty much everything I can think of and everything that I have read on numerous different forums and nothing at all seems to work for me...

I have deleted all anti virus software and disabled all firewalls including windows...

I have used Microsoft Fix it in agressive mode and normal mode...

I have used Windowsupdate agent, Sysytem readiness update tool etc...

I have tried manually installing these updates as well and they still fail...

I am thinking my only option left is to upgrade windows all over again...

I am running Windows 7 64 bit Home Premium on an Asus P5Q Pro Turbo that I have built....

Someone pleeeeaaaaasssse heeeelllppp!!!

A:Update error codes 800B0100 and 80073712... Tried EVERYTHING, HELP!

See this link for error code 80073712
Error number 80073712 - Windows Update

800B0100
Unable to Update error 800b0100

http://www.sevenforums.com/windows-updates-activation/106590-update-error-codes-800b0100-80073712-tried-everything-help.html
Relevancy 62.78%

I recently retired my XP OS on me desktop last week and Clean Installed Win7 Ultimate with SP1 x86 build 7601 then updated using win update, all updates were running smoothly then updated to IE11 manually by downloading the installer, then run win update all updates were installed ok, except for these 4 updates that keeps on failing;
KB2585542
KB2785220
KB2655992
KB2506928
I have error code 800B0100

Here my CBS.

A:Win Update error codes 800B0100 and 80246007

From the looks of it you had an update which got interrupted mid-way through an install.
Here's the error-list from the CheckSUR scan.

Code:
Unavailable repair files:
winsxs\manifests\x86_microsoft-windows-ncrypt-dll_31bf3856ad364e35_6.1.7601.22465_none_603a326269238bd7.manifest
winsxs\manifests\x86_microsoft-windows-security-schannel_31bf3856ad364e35_6.1.7601.18270_none_23d8b7cfb3b95442.manifest
winsxs\manifests\x86_microsoft-windows-ncrypt-dll_31bf3856ad364e35_6.1.7601.18270_none_5fa0c25350128c24.manifest
winsxs\manifests\x86_microsoft-windows-lsa_31bf3856ad364e35_6.1.7601.18270_none_a80cf783bb41b5b7.manifest
winsxs\manifests\x86_microsoft-windows-lsa.resources_31bf3856ad364e35_6.1.7601.18270_en-us_886a4112f511d4a8.manifest
winsxs\manifests\x86_microsoft-windows-security-schannel_31bf3856ad364e35_6.1.7601.22465_none_247227deccca53f5.manifest
winsxs\manifests\x86_microsoft-windows-lsa.resources_31bf3856ad364e35_6.1.7601.22465_en-us_8903b1220e22d45b.manifest
winsxs\manifests\x86_microsoft-windows-lsa_31bf3856ad364e35_6.1.7601.22465_none_a8a66792d452b56a.manifest
servicing\packages\Package_30_for_KB2868725~31bf3856ad364e35~x86~~6.1.1.1.mum
servicing\packages\Package_30_for_KB2868725~31bf3856ad364e35~x86~~6.1.1.1.mum
servicing\packages\Package_32_for_KB2868725~31bf3856ad364e35~x86~~6.1.1.1.mum
servicing\packages\Package_32_for_KB2868725~31bf3856ad364e35~x86~~6.1.1.1.mum
servicing\packages\Package_55_for_KB2868725~31bf3856ad364e35~x86~~6.1.1.1.mum
servicing\packages\Package_55_for_KB2868725~31bf3856ad364e35~x86~~6.1.1.1.mum
servicing\packages\Package_56_for_KB2868725~31bf3856ad364e35~x86~~6.1.1.1.mum
servicing\packages\Package_56_for_KB2868725~31bf3856ad364e35~x86~~6.1.1.1.mum
servicing\packages\Package_57_for_KB2868725~31bf3856ad364e35~x86~~6.1.1.1.mum
servicing\packages\Package_57_for_KB2868725~31bf3856ad364e35~x86~~6.1.1.1.mum
servicing\packages\Package_58_for_KB2868725~31bf3856ad364e35~x86~~6.1.1.1.mum
servicing\packages\Package_58_for_KB2868725~31bf3856ad364e35~x86~~6.1.1.1.mum
servicing\packages\Package_for_KB2868725_SP1~31bf3856ad364e35~x86~~6.1.1.1.mum
servicing\packages\Package_for_KB2868725_SP1~31bf3856ad364e35~x86~~6.1.1.1.mum
servicing\packages\Package_for_KB2868725~31bf3856ad364e35~x86~~6.1.1.1.mum
servicing\packages\Package_for_KB2868725~31bf3856ad364e35~x86~~6.1.1.1.mum
servicing\packages\Package_30_for_KB2868725~31bf3856ad364e35~x86~~6.1.1.1.cat
servicing\packages\Package_30_for_KB2868725~31bf3856ad364e35~x86~~6.1.1.1.cat
servicing\packages\Package_32_for_KB2868725~31bf3856ad364e35~x86~~6.1.1.1.cat
servicing\packages\Package_32_for_KB2868725~31bf3856ad364e35~x86~~6.1.1.1.cat
servicing\packages\Package_55_for_KB2868725~31bf3856ad364e35~x86~~6.1.1.1.cat
servicing\packages\Package_55_for_KB2868725~31bf3856ad364e35~x86~~6.1.1.1.cat
servicing\packages\Package_56_for_KB2868725~31bf3856ad364e35~x86~~6.1.1.1.cat
servicing\packages\Package_56_for_KB2868725~31bf3856ad364e35~x86~~6.1.1.1.cat
servicing\packages\Package_57_for_KB2868725~31bf3856ad364e35~x86~~6.1.1.1.cat
servicing\packages\Package_57_for_KB2868725~31bf3856ad364e35~x86~~6.1.1.1.cat
servicing\packages\Package_58_for_KB2868725~31bf3856ad364e35~x86~~6.1.1.1.cat
servicing\packages\Package_58_for_KB2868725~31bf3856ad364e35~x86~~6.1.1.1.cat
servicing\packages\Package_for_KB2868725_SP1~31bf3856ad364e35~x86~~6.1.1.1.cat
servicing\packages\Package_for_KB2868725_SP1~31bf3856ad364e35~x86~~6.1.1.1.cat
servicing\packages\Package_for_KB2868725~31bf3856ad364e35~x86~~6.1.1.1.cat
servicing\packages\Package_for_KB2868725~31bf3856ad364e35~x86~~6.1.1.1.cat
I'll post a fix protocol later, when I have time.

http://www.sevenforums.com/windows-updates-activation/321946-win-update-error-codes-800b0100-80246007-a.html
Relevancy 62.78%

I have Windows 7 with Internet Explorer 11 and I have done a Windows update with errors with Code 80200010 and Code 80246005 What are they to do with and what do I need to get to install successfully?

A:Windows Update two Codes error failed

Please follow the Windows Update Posting Instructions and post the requested data

If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

Please also post the C:\Windows\windowsudpate.log file

http://www.sevenforums.com/windows-updates-activation/369871-windows-update-two-codes-error-failed.html
Relevancy 62.78%

Hello everyone First I'm new in here and not Failed with more) to error KB2667402 (and two update codes an native speaker so please don't beat me if not everything Failed to update KB2667402 (and more) with two error codes is correct P Failed to update KB2667402 (and more) with two error codes Just correct me thank you About my problem Sadly the list was too long Failed to update KB2667402 (and more) with two error codes for the title so here is the list KBs KB KB KB KB KB KB KB Error codes Code B Code D as far as I know it could mean my PC shut off during an update Here some background infromations Two months ago someone destroyed my PC since the beginning of august I'm finally able to build my new desktop PC In this process I tried to reuse my old HDDs bothe WD Green TBs both work fine which was succesfull Shouldn't be to important but just to be safe In the process of preparing windows Professional x I had some driver problems motherboard because I tried to use my old boot drive in the end I newly installed Win on my SSD and it worked Right now only the old boot drive isn't whiped But so far I hadn't any problems because of that Afterwards I started updating As far as I know the PC had once or twice a problem while updating I think it shut off At least once - I tried to reach the fan control of my pc-case and missed the right button wasn't used to the new case In about this time the problems with the updating started I think it was before I could do my first backup sadly But I still think there is a solution even though it's hard My trials so far error code D and security update KB - Microsoft Community Quote Irma Select Start Control Panel Programs and Features View Installed Updates Locate KB in the list and remove it Restart your computer and download and install the KB again - Gerry C J Cornell Secure boot and then updating microsoft quot fix it quot Windows safe mode and then updating I think maybe this was just point and I am mixing up not totally sure C Windows System catroot name change to catroot old and C Windows SoftwareDistribution name change to SoftwareDistribution old in safe mode restart and then try updating Downloading the update manually and install it just tried it KB and KB For example Download Security Update for Windows for x -based Systems KB from Official Microsoft Download Center I think once it told me it worked but in fact it wasn't the case Edit Tried it again told me it worked But you know the drill haha Sevenforums to do list Windows Update Posting Instructions System Update Readiness Tool completed sfc scannow completed Here also a part from CheckSur txt CBS as dropbox link at the end Quote Summary Seconds executed Found errors CSI Manifest All Zeros Total count CBS MUM Corrupt Total count CBS Catalog Corrupt Total count Unavailable repair files winsxs manifests amd microsoft-windows-winsock-core bf ad e none c manifest winsxs manifests amd microsoft-windows-winsock-core bf ad e none a a e d manifest servicing packages Package for KB bf ad e amd mum servicing packages Package for KB bf ad e amd mum servicing packages Package for KB SP bf ad e amd mum servicing packages Package for KB SP bf ad e amd mum servicing packages Package for KB bf ad e amd mum servicing packages Package for KB bf ad e amd mum servicing packages Package for KB bf ad e amd cat servicing packages Package for KB bf ad e amd cat servicing packages Package for KB SP bf ad e amd cat servicing packages Package for KB SP bf ad e amd cat servicing packages Package for KB bf ad e amd cat servicing packages Package for KB bf ad e amd cat I hope my informations were usefull If not or you need more just ask I also can send a DxDiag if you want so and can tell me if there are personal informations which I should delete first haha Thanks a lot for your help and patience Sincerely MisterBroda P S I think tonymaloney Update KB failed error code B has had a similar problem P P S Probably nothing important but I tried to start Sniper Eli... Read more

A:Failed to update KB2667402 (and more) with two error codes

I've uploaded a file - mbaaa.zip - to my OneDrive at Noel's OneDrive
Please download and save it.
Right-click on the downloaded file, and select Extract all…
Extract to the default location - which will create a new folder mbaaa in the same place.
Open this folder - there should be two folders inside it (Manifests and Packages)

Copy the content of the Packages folder to the folder
C:\Windows\Temp\CheckSur\Servicing\Packages

And the content of the manifests folder (.manifest files) into this folder:

C:\Windows\Temp\CheckSur\Winsxs\Manifests

Now run the CheckSUR tool again (it may take a while)

Post the new CheckSUR.log file, and the CheckSUR.persist.log file.

http://www.sevenforums.com/windows-updates-activation/340907-failed-update-kb2667402-more-two-error-codes.html
Relevancy 61.92%

~ Hello,
Windows 7 is saying I have error code 80070103 when trying to update. 
What do I do?
"Windows update encountered an unknown error Code 80070103"
I don't understand "computer" talk so please explain!
Many thanks

https://social.technet.microsoft.com/Forums/en-US/e9473473-d4ca-4dd2-9795-71a5815e70e3/error-code-80070103-on-windows-7?forum=w7itproinstall
Relevancy 61.92%

I have a toshiba satellite l305 laptop running vista home basic. i have tried to update to sp2 to no avail. i keep getting the above error. i know it relates to trying to install a duplicate/incompatible driver. firstly, can vista basic be upgraded to sp2? secondly, how can i get around this error? i'm not trying to install any standalone drivers just sp2.

A:error 80070103-can't find a solution

Hello trainz2005,
When you say you are trying to install SP2, are you doing it through Windows update or is this a SP2 file you have D/Loaded ?.

http://www.vistax64.com/windows-updates/234036-error-80070103-cant-find-solution.html
Relevancy 61.92%

I had this problem before in Oct. 2006 with my computer at home and put drivecleaner 2006 on it and it corrected the problem. Now my symantec and pestpatrol caught it as spyware and and all and I'm kind of confussed on where to put it back on my computer or not! Any advice. I have Window XP Pro.

A:Windows Updates Fails To Update With No Error Codes.

Drive Cleaner is a program that displays exaggerated reports of security and privacy risks on your computer. Before you can fix these risks, though, the program requires you to purchase the commercial version of the software. Due to this Symantec labels this program a security risk. A screenshot of this program can be seen below.How To Remove Drivecleaner 2006

http://www.bleepingcomputer.com/forums/t/85437/windows-updates-fails-to-update-with-no-error-codes/
Relevancy 61.92%

I think I am guilty of hijacking another thread on this - sorry, I'm new to this!

Thanks joshry101 for your response to where I'm up to...

I'm still stuck in cmd - I'm sorry I'm not too tech savvy but should I just close the cmd window amd proceed with the two installs you suggest ... it's not done anything for hours still at the Installing ..\w61-x64\ ...etc, etc - it all started so well!

I hope I just uploaded an image of how cmd looks right now - it's been there for a few hours following the offline download wsusoffline1062

Thanks!

A:Windows Update Stuck (no error codes, just hanging)

Hi and welcome to SevenForums,
Not sure why you're using cmd
Just download the update,
Stop and switch windows update to manual and run the already downloaded KB

KB3020369 does have to be installed in order to be able to install KB3172605
download links,
Win-7 32 bit
https://download.microsoft.com/downl...020369-x86.msu

Win-7 64 bit
https://download.microsoft.com/downl...020369-x64.msu

Then manually install KB3172605 main article page with all versions,
KB3172605 download links,
Win-7 32 bit
https://download.microsoft.com/downl...172605-x86.msu

Win-7 64 bit
https://download.microsoft.com/downl...172605-x64.msu

After switch your windows update and service settings back to what you had prior and manually check for updates and the rest should show up shortly.

http://www.sevenforums.com/windows-updates-activation/400868-windows-update-stuck-no-error-codes-just-hanging.html
Relevancy 61.92%

Hi all I have been having so many Windows Malfunctioning Error Related and Update Codes problems of late and Malfunctioning Windows Update and Related Error Codes am not able to find a solution Here's a description I have been unable to install updates for a couple of months now so I did a system restore It returned the error unspecified error occurred during system restore xc I tried to do another update after this and none was successful failed I got the following Malfunctioning Windows Update and Related Error Codes error codes F I have been browsing through the forum and Malfunctioning Windows Update and Related Error Codes this led me to look in my installed programs list and noticed that there is no indication of any service pack I might be mistaken but I thought service pack updates used to be there Should I among other things reinstall the service pack and if so how I am really in need of a permanent fix for these recurring problems as I feel my pc is vulnerable It has also slowed substantially in recent months Please note too that I am running Avast Free Antivirus I will be grateful for any assistance

A:Malfunctioning Windows Update and Related Error Codes

The first step is to follow instructions.

Complete this tutorial and post results as instructed in the tutorial.

Windows Update Posting Instructions

The next step is to wait until one of our experts check the log.
At times they are very busy so just hang in there.

http://www.sevenforums.com/windows-updates-activation/364184-malfunctioning-windows-update-related-error-codes.html
Relevancy 61.92%

I am getting two error codes (LU1812 & LU1806) when using Live update of late. How do I fix this? Thanks.
 

A:Norton Live Update download error codes

I've had LU errors in the past.

When the error comes up, there is a link there (can't remember what it is called), that essentially explains the error. As well, it will take you to the Symantec site, and ultimately to a "fix" tool. Run that tool.
 

https://forums.techguy.org/threads/norton-live-update-download-error-codes.661712/
Relevancy 61.92%

For the last few months, Windows Update has been given me error codes 80070011 and 80070026 for half a dozen or so updates (KB3046002, KB3013538, KB3024755, KB3027209, KB3034348, KB3054256, KB3068708). So far I have tried:

Deleting the SoftwareDistribution folder.Running sfc /scannowRunning Dism /Online /Cleanup-Image /RestoreHealthRunning sfc /scannow againInstalling the updates manually.Running the WindowsUpdate troubleshooter.

I've attached my WindowsUpdate.log file. WindowsUpdate.log

Any advice would be very welcome. Thanks in advance!

A:Windows update error codes 80070011 and 80070026

Sorry to say but no one ever gives any help anymore to worried about windows 10
i will research it

http://www.eightforums.com/windows-updates-activation/68898-windows-update-error-codes-80070011-80070026-a.html
Relevancy 61.92%

Hi guys along with my bsod 0x93 problem ive been getting recently some windows updates errors please help me! https://drive.google.com/file/d/0B6z...ew?usp=sharing

A:Windows Update error codes 80070643 and 80071A91.

I suspect that your WU problems will have to wait, until your BSOD problems are solved - but I'll take a look and see if there's anything that relates which may be causing your BSODs and see if we can fix that.

Edit - now I've got the logs downloaded!
There's no significant errors in the CBS.log background - and both SFC and CheckSUR are clear.
I', not sure I can do anything that'll help your BSOD problems, and I think WU should wait until that's cured.

http://www.sevenforums.com/windows-updates-activation/370757-windows-update-error-codes-80070643-80071a91.html
Relevancy 61.92%

The updates I'm trying to install are KB and KB update, codes Windows and 800B0100 error 8007054F MGADiag report Code Diagnostic Report ----------------------------------------- Windows Validation Data-- gt Validation Code Cached Online Validation Code N A hr xc d Windows Product Key - - VJC -XBBR Windows update, error codes 8007054F and 800B0100 -HVTHH Windows Product Key Hash k l EMDQdwK OvdCkPtHG YdosE Windows Product Windows update, error codes 8007054F and 800B0100 ID - - - Windows Product ID Type Windows License Type KMS Client Windows OS version ID - D - A B- D-B DB B E Is Admin Yes TestCab x LegitcheckControl ActiveX N A hr x Signed By N A hr x Product Name Windows Enterprise Architecture x Build lab win sp gdr - TTS Error Validation Diagnostic Resolution Status N A Vista WgaER Data-- gt ThreatID s N A hr x Version N A hr x Windows XP Notifications Data-- gt Cached Result N A hr x File Exists No Version N A hr x WgaTray exe Signed By N A hr x WgaLogon dll Signed By N A hr x OGA Notifications Data-- gt Cached Result N A hr x Version N A hr x OGAExec exe Signed By N A hr x OGAAddin dll Signed By N A hr x OGA Data-- gt Office Status N A OGA Version N A x Signed By N A hr x Office Diagnostics F FE- - E FEE - - D FF - - D FF - - D FF - - D FF - - D FF - - D FF - - D FF - - D FF - - Browser Data-- gt Proxy settings N A User Agent Mozilla compatible MSIE Win Default Browser C Program Files x Mozilla Firefox firefox exe Download signed ActiveX controls Prompt Download unsigned ActiveX controls Disabled Run ActiveX controls and plug-ins Allowed Initialize and script ActiveX controls not marked as safe Disabled Allow scripting of Internet Explorer Webbrowser control Disabled Active scripting Allowed Script ActiveX controls marked as safe for scripting Allowed File Scan Data-- gt File Mismatch C Windows system wat watadminsvc exe Hr x b File Mismatch C Windows system wat npwatweb dll Hr x b File Mismatch C Windows system wat watux exe Hr x b File Mismatch C Windows system wat watweb dll Hr x b File Mismatch C Windows system sppobjs dll Hr x b File Mismatch C Windows system sppc dll Hr x b File Mismatch C Windows system sppcext dll Hr x b File Mismatch C Windows system sppwinob dll Hr x b File Mismatch C Windows system slc dll Hr x b File Mismatch C Windows system slcext dll Hr x b File Mismatch C Windows system sppuinotify dll Hr x b File Mismatch C Windows system slui exe Hr x b File Mismatch C Windows system sppcomapi dll Hr x b File Mismatch C Windows system sppcommdlg dll Hr x b File Mismatch C Windows system sppsvc exe Hr x b File Mismatch C Windows system drivers spsys sys Hr x b File Mismatch C Windows system drivers spldr sys Hr x b File Mismatch C Windows system systemcpl dll Hr x b File Mismatch C Windows system user dll Hr x b Other data-- gt Office Details lt GenuineResults gt lt MachineData gt lt UGUID gt - D - A B- D-B DB B E lt UGUID gt lt Version gt lt Version gt lt OS gt lt OS gt lt Architecture gt x lt Architecture gt lt PKey gt - - - -HVTHH lt PKey gt lt PID gt - - - lt PID gt lt PIDType gt lt PIDType gt lt SID gt S- - - - - - lt SID gt lt SYSTEM gt lt Manufacturer gt To Be Filled By O E M lt Manufacturer gt lt Model gt To Be Filled By O E M lt Model gt lt SYSTEM gt lt BIOS gt lt Manufacturer gt American Megatrends Inc lt Manufacturer gt lt Version gt P lt Version gt lt SMBIOSVersion major quot quot minor quot quot gt lt Date gt lt Date gt lt BIOS gt lt HWID gt FA F F lt HWID gt lt UserLCID gt lt UserLCID gt lt SystemLCID gt lt SystemLCID gt lt TimeZone gt Central Europe Standard Time GMT lt TimeZone gt lt iJoin gt lt iJoin gt lt SBID gt lt stat gt lt stat gt lt msppid gt lt msppid gt lt name gt lt name gt lt model gt lt model gt lt SBID gt lt OEM gt lt GANotification gt lt MachineData gt lt Software gt lt Office gt lt Result gt lt Result gt lt Products gt lt Applications gt lt Office gt lt Software gt lt GenuineResults gt Spsys log Content x Licensing Data-- gt C Windows system slmgr vbs null xC D Windows Acti... Read more

A:Windows update, error codes 8007054F and 800B0100

Interesting - the error code here (Cached Online Validation Code: N/A, hr = 0xc004d302 : C:\Windows\system32\slmgr.vbs(1333, 5) (null): 0xC004D302) is one that I don't ever recall seeing before, but most of the rest of the report is very familiar...


This may simply be caused by a bad set of Intel Rapid Storage Technology drivers -

Installing the Intel Rapid Storage Drivers
try downloading and installing them from here - https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=2101&DwnldID=22194

(you want the iata_enu.exe download)

Once complete, please reboot twice, then post another MGADiag report.

http://www.sevenforums.com/windows-updates-activation/335227-windows-update-error-codes-8007054f-800b0100.html
Relevancy 61.92%

Hi

i was sent over to this section to post about my windows update problems by axe0, after he helped my whit my blue screen problems

i have installed SURT however it said it failed to install windows update hotfix, im also getting two error codes, and they are:

Code 800736B3
Code 80004005

i also ran and SFC scan and have attached the CBS.zip aswell.

https://drive.google.com/file/d/0B6Q...ew?usp=sharing

Any help would be greatly appreciated !

Thanks

Andrew

http://www.sevenforums.com/windows-updates-activation/384513-windows-update-problems-unknown-error-codes.html
Relevancy 61.49%

I keep getting Update Failed error with the following codes:

Code 800F0900 (unknown error)
Code 80073712 (unknown error)

The updates are for:
Cumulative Security Update for Internet Explorer 10 for Windows 7 Service Pack 1 for x64-based Systems (KB2879017)
and
Update for Windows 7 for x64-based Systems (KB2882822)

I had the same issue with .Net Framework updates, but uninstalling with a .Net full removal tool then re-installing did the trick there.

So far I've tried manually installing the updates, running WindowsUpdateDiagnostic, running Tweaking.com Windows Repair (All in One), Microsoft FixIt. None of these have helped and am a loss.

I've included the CBS files as well as the SFCFix.txt to this post. Any suggestions on what to do next? Let me know if you need more info...

Thanks!

A:Windows Update Fail - Error Codes 800F0900 and 80073712

You have a LOT of errors there!
Here's the SFCFix summary...
AutoAnalysis::

Code:
SUMMARY: Some corruptions could not be fixed automatically and others were
unimportant. Seek advice from helper or sysnative.com.
CBS & SFC total detected corruption count: 8

CBS & SFC total unimportant corruption count: 0
CBS & SFC total fixed corruption count: 0
SURT total detected corruption count: 98
SURT total unimportant corruption count: 2
SURT total fixed corruption count: 0
AutoAnalysis:: directive completed successfully.

I'll post a first-fix protocol later, and we'll see how it goes.

http://www.sevenforums.com/windows-updates-activation/308445-windows-update-fail-error-codes-800f0900-80073712-a.html
Relevancy 61.49%

I am having some trouble with Windows Update failures. The updates are:

KB2977629
KB2972211
KB2973112
KB2952664

The error codes are 8024200D and 8007371B

I ran SURT and SFC but I cant attach the CBS.zip file because its about 23M and 8M is the limit

Thanks

Mark

A:4 Windows Update Failures error codes 8024200D and 8007371B

OK here's my CBS zip file

http://www.sevenforums.com/windows-updates-activation/346612-4-windows-update-failures-error-codes-8024200d-8007371b.html
Relevancy 61.49%

Hello,

since some days i get those Error Codes, and i can't activate my Windows (it was activated already and suddenly it says it's not activated anymore), can't make any Updates and in the rightclick computer -> settings it says at the point about Activation : not available.
I uses sfc /scannow several times and did a restart between it, installed SURT but nothing helped.
I also get an error message, when i clock on copy in the Microsoft Genuine Advantage Diagnostic Tool, i attached it to this post aswell as the Update Error Screen and the CBS Folder.
I tried to inplace upgrade this windows, with a Win7 Sp1 DVD but it wont finish.

For me the only way i found to input my key for activation was using "slui 3" in the cmd box but it would not activate with the error message Cx0000022, i added a screenshot of it.

A:Error Codes C0000022 0x000001A8 Win Update and Activation Problems

The error message you got from MGADiag is common - and can be ignored, as the file almost always is properly copied to the clipboard and hence available for posting/pasting. The error itself means that the backups created couldn't be saved to disk for one reason or another.

You have a combination of error codes in the thread title which is a little unusual - but possibly not inconsistent.

The CheckSUR is interesting...

Code:
Summary:
Seconds executed: 64
No errors detected
(w) Unable to open Event Log 0x000006B5 Application OpenEventLog failed: 0x000006B5 - Die Schnittstelle ist unbekannt.
.
(w) Unable to open Event Log 0x000006B5 System OpenEventLog failed: 0x000006B5 - Die Schnittstelle ist unbekannt.
.
The SFC scan is clear - but the background data is very interesting...

Code:
2014-06-29 20:10:55, Error CBS Failed to ask UI handler to terminate. [HRESULT = 0x800706ba - RPC_S_SERVER_UNAVAILABLE]
2014-06-29 20:10:55, Info CBS Shtd: Changing shutdown timeout to a static timeout: 3600000
2014-06-29 20:10:56, Error CBS Failed to ask UI handler to terminate. [HRESULT = 0x800706ba - RPC_S_SERVER_UNAVAILABLE]
2014-06-29 20:10:57, Info CBS Exec: Processing complete. Session: 30380997_179519896, Package: Microsoft-Windows-InternetExplorer-Package-TopLevel~31bf3856ad364e35~x86~~10.2.9200.16521 [HRESULT = 0x80070005 - E_ACCESSDENIED]
2014-06-29 20:10:57, Error CBS Failed to perform operation. [HRESULT = 0x80070005 - E_ACCESSDENIED]
2014-06-29 20:10:57, Info CBS Session: 30380997_179519896 finalized. Reboot required: no [HRESULT = 0x80070005 - E_ACCESSDENIED]
2014-06-29 20:10:57, Info CBS Ending the TrustedInstaller main loop.
This seems to stem from the following ...

Code:
2014-06-29 20:12:19, Info CBS Failed call to CryptCATAdminAddCatalog. [HRESULT = 0x80070005 - E_ACCESSDENIED]
This may give us a clue where the error lies...


This can result from mistakenly setting the System32 folder and its contents to 'Read Only' status.

Open Windows Explorer (Computer)
Navigate to the C:\Windows folder
Find the System32 sub-folder and right-click on it
select Properties

Clear the 'blob' from the 'Read-only (Only applies to files in folder)' box by clicking on it until it's plain white.
Click on Apply.

Make sure that the radio button for 'Apply changes to this folder, subfolders and files' is set, and click OK.

Accept the Administrator prompt. After a couple of seconds, you'll be told there is an error - click on the 'Ignore all' button.

Wait for it to finish - it could take a couple of minutes.

OK out, and exit Windows Explorer.

Reboot twice

Post a new MGADiag report.

http://www.sevenforums.com/windows-updates-activation/336296-error-codes-c0000022-0x000001a8-win-update-activation-problems.html
Relevancy 61.49%

Product Name HP ENVY m j dx Operating System Microsoft Windows -bit I attempted a BIOS update earlier today codes after to with error no BIOS Notebook refuses boot update After it finished it said that the screen may be black and LED s may blink for a while after I don t remember the exact wording Well the screen was still black after about hours so I turned it off and now it refuses to boot There are no Notebook refuses to boot after BIOS update with no error codes beeps no error codes no POST nothing so I figure the BIOS must be corrupted or something I ve tried resets and the windows key b trick with no luck I ve spent a few hours trying to figure out how to Notebook refuses to boot after BIOS update with no error codes run a the BIOS from a USB but info is a bit scarce so I couldn t figure it out So what else can I try I don t really have the time nor the money to send it in for repairs but I need this computer for school by next week Edit A while ago I had to restore my laptop which erased my HP TOOLS partition So if anyone has the same or a similar laptop and still has their HP TOOLS partition a DL link would probably make this a lot easier to fix nbsp

Relevancy 61.49%

Hi there,

When I run windows update I receive a few errors, along with numerous failed updates.

I have attached my zipped CBS folder and a screenshot in the below link, as the CBS folder was too large to attach.

https://onedrive.live.com/?cid=B85F8...81CC1FE97A!160

Hope someone can help!
Many Thanks

A:Windows update error codes, 800B0100, 80073712, 8024200D

While I take a look at your CBS logs, please also upload your C:\windows\windowsupdate.log file - it'll tell me which updates have which problem.

http://www.sevenforums.com/windows-updates-activation/357787-windows-update-error-codes-800b0100-80073712-8024200d.html
Relevancy 61.49%

I have to update these two updates in order to use my university's internet connection. I have tried many, many troubleshooting methods from Microsoft's Fix-It Tool to manually installing the updates to repairing and even re-installing .NET Framework from a clean source. I have my CheckSur files attached. The CBS file was too big to upload.

Thanks in advance for any help.

A:Cannot Update KB2691442 & KB2732500 - Error Codes 800B0100 & 800F0900

Hello Leespiker and welcome to the forums

Here's the log from the latest SURT run:


Code:
=================================
Checking System Update Readiness.
Binary Version 6.1.7601.21645
Package Version 15.0
2012-08-27 22:56

Checking Windows Servicing Packages

Checking Package Manifests and Catalogs
(f) CBS MUM Corrupt 0x800F0900 servicing\Packages\Package_2_for_KB2691442~31bf3856ad364e35~amd64~~6.1.1.3.mum Line 1: INDX(
(f) CBS MUM Corrupt 0x800F0900 servicing\Packages\Package_for_KB2691442~31bf3856ad364e35~amd64~~6.1.1.3.mum Line 1: INDX(
(f) CBS MUM Corrupt 0x800F0900 servicing\Packages\Package_for_KB2705219~31bf3856ad364e35~amd64~~6.1.1.1.mum Line 1: INDX(

Checking Package Watchlist

Checking Component Watchlist

Checking Packages

Checking Component Store
I have extracted the files from the update and attached them to this post (Extracted.zip), please download and extract this file to your desktop. There will be two files:

package_2_for_kb2691442~31bf3856ad364e35~amd64~~6.1.1.3.mum
package_2_for_kb2691442~31bf3856ad364e35~amd64~~6.1.1.3.cat

Copy and paste these files into the following location:

%Windir%\Temp\CheckSur\Servicing\Packages

Where %Windir% is usually C:\Windows

Then rerun the SURT and copy and paste the CheckSUR.persist.log as before.

Tom

http://www.sevenforums.com/windows-updates-activation/249439-cannot-update-kb2691442-kb2732500-error-codes-800b0100-800f0900.html
Relevancy 61.49%

Hi, 3 updates will not install no matter what I do. Have run SURT and Windows Update Diagnostic. I have attached screenshots of the error codes and update history. I have also attached the CheckSUR.log and CheckSur.persist.log files from the CBS file. The whole CBS file is too large to upload. Help would be very appreciated.

A:Windows 7 Pro update error codes: 80073712, 8024200D, 80070490.

I've seen a lot worse

Here's the problem-list from CheckSUR...

Code:
Unavailable repair files:
winsxs\manifests\x86_microsoft-windows-authentication-authui_31bf3856ad364e35_6.1.7601.22843_none_0e6300c36ce0e937.manifest
winsxs\manifests\x86_microsoft-windows-a..on-authui.resources_31bf3856ad364e35_6.1.7601.22843_en-us_8dec1b1b1482822e.manifest
winsxs\manifests\amd64_microsoft-windows-a..on-authui.resources_31bf3856ad364e35_6.1.7601.22843_en-us_ea0ab69eccdff364.manifest
winsxs\manifests\amd64_microsoft-windows-installer-engine_31bf3856ad364e35_6.1.7601.18637_none_618dcfbeca31e3f1.manifest
winsxs\manifests\wow64_microsoft-windows-installer-engine_31bf3856ad364e35_6.1.7601.18637_none_6be27a10fe92a5ec.manifest
winsxs\manifests\wow64_microsoft-windows-installer-engine_31bf3856ad364e35_6.1.7601.22843_none_6c5d47ae17bbf972.manifest
winsxs\manifests\amd64_microsoft-windows-installer-handler_31bf3856ad364e35_6.1.7601.22843_none_3d68a84c7ba605fb.manifest
winsxs\manifests\x86_microsoft-windows-installer-handler_31bf3856ad364e35_6.1.7601.22843_none_e14a0cc8c34894c5.manifest
winsxs\manifests\amd64_microsoft-windows-installer-engine_31bf3856ad364e35_6.1.7601.22843_none_62089d5be35b3777.manifest
winsxs\manifests\amd64_microsoft-windows-authentication-authui_31bf3856ad364e35_6.1.7601.22843_none_6a819c47253e5a6d.manifest
winsxs\manifests\amd64_microsoft-windows-lua_31bf3856ad364e35_6.1.7601.22843_none_04d87c628ca1e3ee.manifest
servicing\packages\Package_40_for_KB3008627~31bf3856ad364e35~amd64~~6.1.1.0.mum
servicing\packages\Package_40_for_KB3008627~31bf3856ad364e35~amd64~~6.1.1.0.mum
servicing\packages\Package_41_for_KB3008627~31bf3856ad364e35~amd64~~6.1.1.0.mum
servicing\packages\Package_41_for_KB3008627~31bf3856ad364e35~amd64~~6.1.1.0.mum
servicing\packages\Package_42_for_KB3008627~31bf3856ad364e35~amd64~~6.1.1.0.mum
servicing\packages\Package_42_for_KB3008627~31bf3856ad364e35~amd64~~6.1.1.0.mum
servicing\packages\Package_78_for_KB3008627~31bf3856ad364e35~amd64~~6.1.1.0.mum
servicing\packages\Package_78_for_KB3008627~31bf3856ad364e35~amd64~~6.1.1.0.mum
servicing\packages\Package_79_for_KB3008627~31bf3856ad364e35~amd64~~6.1.1.0.mum
servicing\packages\Package_79_for_KB3008627~31bf3856ad364e35~amd64~~6.1.1.0.mum
servicing\packages\Package_80_for_KB3008627~31bf3856ad364e35~amd64~~6.1.1.0.mum
servicing\packages\Package_80_for_KB3008627~31bf3856ad364e35~amd64~~6.1.1.0.mum
servicing\packages\Package_81_for_KB3008627~31bf3856ad364e35~amd64~~6.1.1.0.mum
servicing\packages\Package_81_for_KB3008627~31bf3856ad364e35~amd64~~6.1.1.0.mum
servicing\packages\Package_for_KB3008627_SP1~31bf3856ad364e35~amd64~~6.1.1.0.mum
servicing\packages\Package_for_KB3008627_SP1~31bf3856ad364e35~amd64~~6.1.1.0.mum
servicing\packages\Package_for_KB3008627~31bf3856ad364e35~amd64~~6.1.1.0.mum
servicing\packages\Package_for_KB3008627~31bf3856ad364e35~amd64~~6.1.1.0.mum
I'll post a fix protocol later - it shouldn't be a problem, since all errors appear to be from the same update.

http://www.sevenforums.com/windows-updates-activation/367305-windows-7-pro-update-error-codes-80073712-8024200d-80070490-a.html
Relevancy 61.06%

I am trying to assist a friend in repairing their windows update problems. I've made progress- but I have 5 Important updates that refuse to install...

IE11 - 9C59
KB2937610 - 800736B3
KB2972211 - 800736B3
KB3032323 - 800736B3
KB2791765 - 800736B3

the SURT was run- and got most of the updates to work other than the ones shown above.
sfc /scannow said all files were fine.

SURT has been run 4 or so times- it's not shown any repairs after the first run... as I would expect.

I've looked through the log files, but I am not really sure what I am looking for to indicate what the problem is.

I have attempted to attach the CBS.Zip file but I got a 404 error each time I clicked "Upload". This must be due to the size of the file. Here is a onedrive link to the zip file.

A:Windows Update: 800736B3 and 9C59

The upload is 8 times larger than the forum's 8MB size limit on Zip/RAR files - which is why it wouldn't upload here

Your first run of CheckSUR had the following summary...





Quote:
Summary:
Seconds executed: 1046
Found 31 errors
CSI C Mark Deployment Missing Total count: 31


The next was clear of errors - how did you go about fixing the C Mark errors, since CheckSUR wasn't able to do it?

The CBS.log file shows the expected errors for the updates (apart from the IE one)
e.g.


Code:
2015-07-10 12:40:38, Info CBS Appl: Evaluating package applicability for package Package_2_for_KB2753842~31bf3856ad364e35~amd64~~6.1.2.0, applicable state: Installed
2015-07-10 12:40:38, Info CBS Plan: Package: Package_2_for_KB2753842~31bf3856ad364e35~amd64~~6.1.2.0, current: Installed, pending: Default, start: Installed, applicable: Installed, targeted: Installed, limit: Installed
2015-07-10 12:40:38, Error CSI [email protected]/7/10:16:40:38.687 (F) d:\win7sp1_gdr\base\wcp\componentstore\csd_core.cpp(616): Error STATUS_SXS_ASSEMBLY_NOT_FOUND originated in function CCSDirect::GetDeploymentClosureStatus expression: (null)
[gle=0x80004005]
2015-07-10 12:40:38, Error CSI 0000002d (F) HRESULT_FROM_WIN32(ERROR_SXS_ASSEMBLY_NOT_FOUND) #630188# from Windows::ServicingAPI::CCSITransactionAnalysis_ICSIInventory::GetDeploymentInformation(flags = 0, class = ICSIINVENTORY_GET_DEPLOYMENT_INFORMATION_CLASS_CLOSURE (1), information = {dwFlags=00000000})
[gle=0x800736b3]
2015-07-10 12:40:38, Info CBS Failed to call GetDeploymentInformation on deployment: amd64_79cc1bf455dd56703d940a275924c112_31bf3856ad364e35_6.1.7601.22195_none_015b15d745c7b295 [HRESULT = 0x800736b3 - ERROR_SXS_ASSEMBLY_NOT_FOUND]
2015-07-10 12:40:38, Info CBS Failed to get component state. [HRESULT = 0x800736b3 - ERROR_SXS_ASSEMBLY_NOT_FOUND]
2015-07-10 12:40:38, Info CBS Failed to get current state of the deployment [HRESULT = 0x800736b3 - ERROR_SXS_ASSEMBLY_NOT_FOUND]
2015-07-10 12:40:38, Info CBS Failed to get Transaction State for package: Package_2_for_KB2753842~31bf3856ad364e35~amd64~~6.1.2.0, update: 2753842-3_neutral_LDR [HRESULT = 0x800736b3 - ERROR_SXS_ASSEMBLY_NOT_FOUND]
2015-07-10 12:40:38, Info CBS Failed to get current state. [HRESULT = 0x800736b3 - ERROR_SXS_ASSEMBLY_NOT_FOUND]
2015-07-10 12:40:38, Info CBS Failed to populate updates for package: Package_2_for_KB2753842~31bf3856ad364e35~amd64~~6.1.2.0 [HRESULT = 0x800736b3 - ERROR_SXS_ASSEMBLY_NOT_FOUND]
2015-07-10 12:40:38, Info CBS Failed to add package to execution for package:Package_2_for_KB2753842~31bf3856ad364e35~amd64~~6.1.2.0 [HRESULT = 0x800736b3 - ERROR_SXS_ASSEMBLY_NOT_FOUND]
2015-07-10 12:40:38, Info CBS Failed to process component watch list. [HRESULT = 0x800736b3 - ERROR_SXS_ASSEMBLY_NOT_FOUND]
2015-07-10 12:40:38, Info CSI [email protected]/7/10:16:40:38.762 CSI Transaction @0x116ada0 destroyed
2015-07-10 12:40:38, Info CBS Perf: InstallUninstallChain complete.
This looks to me as if the install is actually stuck in a pending state, and you need to roll it back...


This is the command to run when booted offline at a Repair Environment command prompt

dism.exe /image:C:\ /cleanup-image /revertpendingactions

This is supposed to revert all pended updates, and hopefully allow the system to start again - assuming it works, do another Check for Updates before attempting to install the updates again.

http://www.sevenforums.com/windows-updates-activation/375172-windows-update-800736b3-9c59.html
Relevancy 61.06%

As title. Im using W7 64-bit version and its a cumulative security update for IE8.
Microsoft charges me to try and email my issues, so id thought id try here first.

what should i do to solve this problem? I have disabled my Kaspersky and no change. I have also downloaded it manually and it just says it cant be installed.

A:trying to use update KB980182 gives code 800736B3?!?!?!

Is Windows Defender on? See if disabling it in 'services' helps.

http://www.sevenforums.com/windows-updates-activation/76089-trying-use-update-kb980182-gives-code-800736b3.html
Relevancy 61.06%

Hello,

I am having difficulty updating windows. Specifically, when I attempt to install service pack 1 (KB2585542), I receive error 8007065E. Before coming to these forums, I tried rebooting the machine and installing with antivirus temporarily disabled. I have since followed the instructions on the forums and run the system update readiness tool (SURT), done the SFC scan, and collected logs. Any assistance with this would be much appreciated.

Thank you!

A:Windows 7 - Service Pack 1 installation error 8007065E

The update you quote has nothing to do with Service Pack 1 for Windows 7 - instead, it's this update. MS12-006: Description of the security update for Webio, Winhttp, and schannel in Windows: January 10, 2012

There are no problems in either the CheckSUR or SFC logs -

The background CBS data however, shows this error sequence...

Code:
2014-07-15 17:44:52, Info CBS Session: 30384246_46319248 initialized by client WindowsUpdateAgent.
2014-07-15 17:44:52, Info CBS Identity missing version. [HRESULT = 0x80070057 - E_INVALIDARG]
I need to have a look at your
C:\Windows\windowsupdate.log
file - please upload it to your reply.

http://www.sevenforums.com/windows-updates-activation/338081-windows-7-service-pack-1-installation-error-8007065e.html
Relevancy 60.63%

Hi.
My Win 7 Pro is constantly crashing. Sometimes at startup ( in normal mode, not in safe mode ), every time at Windows Update and even when system is idle ( in normal and safe mode ).
Some of my error codes are: 0x7E; 0x8E; 0x50; 0x7F; 0xC2; 0x0A; 0xD1

A:multiple BSOD error codes at startup, Windows Update even when idle

Wow thats a lot of dumps, first up of you are OCing in any way stop and return all bios settings to default

Please update your system specs, if your not sure look here


OK had a quick scan and theres a massive variation of codes and causes there too many dumps to go into them all in detail
A few things that stand out are there are lots of errors relating to info input & output and disk activity so i recommend you run some hardware tests and i think you may have a problem with a disk drive, try these and report back on their outcomes
Hard Drive Diagnostic Procedure
RAM - Test with Memtest86+

Also you have some bad programs/drivers installed
First up you have the oldest driver i have ever seen installed on a win 7 system 1996 wow heres a list of all the stuff you need to update ( the first two need to be gone IMO if its something you cant update but you use uninstall you can reinstall later after we have cured your BSOD and regained a stable system)
giveio.sys 04/04/1996 02:33:25 this is a driver relating to speedfan, uninstall it and install newer copy if you wish
ASACPI.sys 13/08/2004 02:52:52 this is a driver associated with an asus mobo utility, uninstall it
ADIHdAud.sys 16/01/2007 16:41:49 SoundMAX Digital HD Audio Driver
nvm62x32.sys 17/10/2008 21:00:39 nVidia Ethernet Networking Driver (nForce chipset driver)
netr28u.sys 26/02/2009 02:42:42 Ralink RT2870 series USB802.11n Wireless Adapter Driver (you may have a different manufacturer)
a014p1am.SYS 21/03/2009 14:47:30 Not sure what this is google doesnt find either ?????????

You also have daemon tools installed you need to remove it as it includes a driver named sptd.sys and that is a known cause of BSODs on win 7 uninstall program then run tool here to see if driver is gone, if driver is already uininstalled when you run tool the uninstall button will be grayed out/not clickable

I would advise you clear your minidump folder (move them all to a new location) and any new BSODs you get after you run all the above upload seperately by running SF tool again

http://www.sevenforums.com/bsod-help-support/272644-multiple-bsod-error-codes-startup-windows-update-even-when-idle.html
Relevancy 60.63%

Hello. I have tried my best to do everything recommended here to solve the issue of failed installments of windows updates:

Fix: Windows Updates fail to install in Windows 7 | 8

Obviously, I haven't been successful. I am not very good with computers, so I would appreciate your patience as you help me with this problem.

Thank you for your help.

A:Windows Update Fails to Install: error codes 800B0100 and 9C47

Attachment 286200

Here is the CBS zip.

http://www.sevenforums.com/windows-updates-activation/305214-windows-update-fails-install-error-codes-800b0100-9c47.html
Relevancy 60.63%

So I'm troubleshooting some blue screens on this HP system and I'm having a heck of a time trying to get two specific drivers installed. The two are the Intel HD WDDM1 and WDDM1.2 Graphics, and the Intel desktop/workstation/server express chipset SATA/AHCI controller driver. I keep getting the error that states that windows already has a more compatible driver. I've done a lot of searching and have found where to download these drivers but I have had no success successfully installing them. Anybody run into this before?

A:HP P7-1267c Error 80070103 When installing SATA and Vid Drivers

Hi there .... The Drivers you are looking for our on the HP Website .. They are not that old .. But if you are having BSOD follow the Link below ... One of our BSOD Experts will be able to advise you ....

Blue Screen of Death (BSOD) Posting Instructions

http://www.sevenforums.com/drivers/321608-hp-p7-1267c-error-80070103-when-installing-sata-vid-drivers.html