Windows Support Forum

Windows 7 SP1 Error 800736B3

Q: Windows 7 SP1 Error 800736B3

Hello I've been pulling my hair out trying to install SP for win for some time and have had no luck or useful support from Microsoft on the issue I've 800736B3 Error 7 SP1 Windows run the CheckSUR multiple times I've posted the log below I've run the sfc program and when it finishes is says quot Windows Resource Protection did not find any integrity violations quot I've posted Windows 7 SP1 Error 800736B3 the CBS log below I've uninstalled AVG and tried to run the update same error I've run all the fixes that could be connected to the error No Help I've downloaded the SP package as a standalone installation same error I've tried to run a repair installation from the Win disk no improvement So here I am asking if anyone has an answer for me I have some software that will only run with SP installed so I need to figure this out and I would rather not do a fresh install if possible Thanks in advance for any help you can provide

Relevancy 100%
Preferred Solution: Windows 7 SP1 Error 800736B3

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Windows 7 SP1 Error 800736B3

Press the Windows Flag key and the Pause key and post a picture using this tutorial by Brink:

Screenshots and Files - Upload and Post in Seven Forums

http://www.sevenforums.com/windows-updates-activation/367395-windows-7-sp1-error-800736b3.html
Relevancy 67.08%

Okay I currently have the CBS file compressing but here's the basic rundown of my problem: Updates fail to install and gives me error code 800736B3, no matter how I try to install them, one at a time, all at once, on shutdown, while computer is running, etc. It has continually asked me to run checkdisk when I turn it on and won't run unless I do, and when it does run, it deletes files that are Corrupted, I think? Has crashed my computer once this past week which made me begin to look into the issue

Edit- The file won't attach normally so I've uploaded it to a public Google drive.
Link for that is here. https://drive.google.com/folderview?...Tg&usp=sharing

A:Windows Update Error 800736B3

Can you complete this Tutorial. If you can please do.

Windows Update Posting Instructions

http://www.sevenforums.com/windows-updates-activation/373124-windows-update-error-800736b3.html
Relevancy 67.08%

Hi
I have problems with Windows Update, it does not install updates.
I have run SURT and SFC Scan.
Logs enclosed.

Many thanks for your help!

A:Windows Update: error 800736B3

This is the only error in the SFC scan...

Code:
Line 3507: 2015-02-27 11:22:03, Info CSI 00000310 [SR] Repairing 1 components
Line 3508: 2015-02-27 11:22:03, Info CSI 00000311 [SR] Beginning Verify and Repair transaction
Line 3511: 2015-02-27 11:22:03, Info CSI 00000313 [SR] Cannot repair member file [l:22{11}]"PINTLGB.IMD" of Microsoft-Windows-IME-Simplified-Chinese-Core, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
Line 3514: 2015-02-27 11:22:04, Info CSI 00000315 [SR] Cannot repair member file [l:22{11}]"PINTLGB.IMD" of Microsoft-Windows-IME-Simplified-Chinese-Core, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
Line 3515: 2015-02-27 11:22:04, Info CSI 00000316 [SR] This component was referenced by [l:202{101}]"Microsoft-Windows-Foundation-Package~31bf3856ad364e35~amd64~~6.1.7601.17514.WindowsFoundationDelivery"
Line 3520: 2015-02-27 11:22:04, Info CSI 00000319 [SR] Could not reproject corrupted file [ml:520{260},l:62{31}]"\??\C:\Windows\IME\IMESC5\DICTS"\[l:22{11}]"PINTLGB.IMD"; source file in store is also corrupted
Line 3533: 2015-02-27 11:22:05, Info CSI 0000031b [SR] Repair complete
I'll post a fix protocol later.

http://www.sevenforums.com/windows-updates-activation/362678-windows-update-error-800736b3.html
Relevancy 67.08%

I have a computer that has been failing to install the IE cumulative updates. It is now also failing to install the bundled security updates (KB3192391 for example). I have tried the system readiness tool, clearing out the database, manually installing,
removing/re-adding IE from Windows features, and running SFC scan. I cannot find a solution for error 800736B3. Anyone know any other things I can do?
This is for a business computer. Would I qualify for free Microsoft support? If I do, how do I start that process?

https://social.technet.microsoft.com/Forums/en-US/77791b84-fa65-4e6b-a2ff-6ab21a7e926e/windows-update-error-800736b3?forum=w7itprosecurity
Relevancy 66.22%

Hi,

i need help - my windows update doesn't work.

I put 2 cbs (CBS_1part and CBS_2part) - becouse log have 10MB after zip'ing.
(must unpack CBS_1part and CBS_2part to one folder after that unpack CBS.log)

file other.zip have another files from CBS folder.

A:Windows update Error 80243004 and 800736B3

What on earth did you use to split the Zip files? I've tried 3 different tools, and all tell me the files are corrupt.

Please just zip two/3 files together and upload them separately, then do another 2/3 files.

http://www.sevenforums.com/windows-updates-activation/371744-windows-update-error-80243004-800736b3.html
Relevancy 66.22%

Hi,
I have a problem with Windows Update. Firstly, i got windows update servise not running message. Then I was download the System Update Readiness Tool when i start that i get this error code 0x8007000d. Finally I tried update in windows update again i get this error code 800736B3.
I would greatly appreciate any help with this.

A:Windows Update, error code 800736B3

We also need the CheckSUR.log file created by running the CheckSUR/SURT tool - even if incomplete, it may give us some clues.


Your SFC scan identified the following problems -

Code:
Line 9296: 2014-06-06 13:33:15, Info CSI 00000244 [SR] Repairing 7 components
Line 9297: 2014-06-06 13:33:15, Info CSI 00000245 [SR] Beginning Verify and Repair transaction
Line 9298: 2014-06-06 13:33:15, Info CSI 00000246 [SR] Cannot repair member file [l:22{11}]"lsi_sas.sys" of lsi_sas.inf, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, file is missing
Line 9299: 2014-06-06 13:33:15, Info CSI 00000247 [SR] Cannot repair member file [l:20{10}]"lsi_fc.sys" of lsi_fc.inf, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, file is missing
Line 9300: 2014-06-06 13:33:16, Info CSI 00000248 [SR] Cannot repair member file [l:32{16}]"bthmigplugin.dll" of Microsoft-Windows-BTH-USER, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, file is missing
Line 9301: 2014-06-06 13:33:17, Info CSI 00000249 [SR] Cannot repair member file [l:102{51}]"Microsoft-Windows-IIS-HTTPLogging-Deployment-DL.man" of Microsoft-Windows-Migration-DownlevelManifests, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, file is missing
Line 9302: 2014-06-06 13:33:17, Info CSI 0000024a [SR] Cannot repair member file [l:76{38}]"MediaServer-Multicast-Migration-DL.man" of Microsoft-Windows-Migration-DownlevelManifests, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, file is missing
Line 9303: 2014-06-06 13:33:17, Info CSI 0000024b [SR] Cannot repair member file [l:100{50}]"Microsoft-Windows-IIS-IPSecurity-Deployment-DL.man" of Microsoft-Windows-Migration-DownlevelManifests, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, file is missing
Line 9304: 2014-06-06 13:33:17, Info CSI 0000024c [SR] Cannot repair member file [l:30{15}]"winlogon-DL.man" of Microsoft-Windows-Migration-DownlevelManifests, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, file is missing
Line 9305: 2014-06-06 13:33:17, Info CSI 0000024d [SR] Cannot repair member file [l:24{12}]"msdtcstp.dll" of Microsoft-Windows-Migration-DownlevelManifests, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, file is missing
Line 9306: 2014-06-06 13:33:17, Info CSI 0000024e [SR] Cannot repair member file [l:44{22}]"TabletPCJournal-DL.man" of Microsoft-Windows-Migra... Read more

http://www.sevenforums.com/windows-updates-activation/333896-windows-update-error-code-800736b3.html
Relevancy 66.22%

I have been stuck with this error for a bit and would like to get rid of the .NET 3.5.1 patch notices. CBS log attached for review.

Thanks for the help.

A:Windows Update: error 800736B3 with .NET 3.5.1 patch

Your CBS log did not come through:

http://www.sevenforums.com/windows-updates-activation/363882-windows-update-error-800736b3-net-3-5-1-patch.html
Relevancy 66.22%

Hi,

Whenever I try to run windows update it seems to fail, the error code i get is 800736B3.

I have followed the instructions and ran the hotfix and sfc scan however the problem still persists.

I have attached the files that i can, however when compressing the CBS folder it totals to 196MB so its impossible to upload here.

Any help would be much appreciated!

Thanks,

Tim

A:Windows Update Error Code: 800736B3

Hi,

I have now added a drop box link to the CBS folder:

https://www.dropbox.com/s/f920qsjxup5g4hk/CBS.zip?dl=0

Thanks,

Tim

http://www.sevenforums.com/windows-updates-activation/377776-windows-update-error-code-800736b3.html
Relevancy 66.22%

Hi,

This is my first post, and not all that clever with pcs, so apologies in advance if I've missed something out.

I have been getting this error code repeatedly when trying to install update KB2922229 for a couple of months now. Never had any problems before. Other updates were installing just fine, but I am now getting the same error code when trying to install update KB2871997. As both of these updates seem to be related to security, I am getting a bit concerned.

I have followed the steps in the Windows Update Posting Instructions, running SURT and an SFC scan. Logs attached.

Hope someone will be kind enough to help with this.

A:Windows Update Error Code 800736B3

I have never seen such a CheckSUR summary before!

Code:
Summary:
Seconds executed: 94
Found 6833 errors
Fixed 6833 errors
CSI Catalog Missing Total count: 7
Fixed: CSI Catalog Missing. Total count: 7
CSI Missing Component Key Total count: 927
Fixed: CSI Missing Component Key. Total count: 927
CSI Missing Pinned Component Key Total count: 15
Fixed: CSI Missing Pinned Component Key. Total count: 15
CSI Missing Identity Total count: 2026
Fixed: CSI Missing Identity. Total count: 2026
CSI Missing C Mark Total count: 1617
Fixed: CSI Missing C Mark. Total count: 1617
CSI Payload File Missing Total count: 24
Fixed: CSI Payload File Missing. Total count: 24
CSI F Mark Missing Total count: 2232
Fixed: CSI F Mark Missing. Total count: 2232
The SFC scan is clear - which in view of the above, is rather surprising.

Have you tried installing the updates again since running the CheckSUR/SURT?

If not, please do so, and let us know what happens - First do a check for Updates, and see if the updates appear at all - they may not.

http://www.sevenforums.com/windows-updates-activation/332755-windows-update-error-code-800736b3.html
Relevancy 66.22%

Hi, I've been receiving error code 800736b3 when trying to install 2 security updates and I don't know what the problem is.

A:Windows Update error code 800736b3

When this happens to me (just did - code 8007038) I install the updates one at a time.
Worked for me.

http://www.sevenforums.com/windows-updates-activation/334740-windows-update-error-code-800736b3.html
Relevancy 66.22%

Hello,

My Windows 7 x64 Home Premium updates are failing with error code 800736B3

I've tried the "Update Readiness Tool for Windows 7 x64" and they still fail.

I've tried SFC /SCANNOW and they still fail.

Please Help!!

Thank You!

Rob S.
 

A:Windows 7 Updates Failing Error 800736B3

Which update is failing
 

https://forums.techguy.org/threads/windows-7-updates-failing-error-800736b3.1132460/
Relevancy 66.22%

CBS.zip is attached. can anyone help with this error code. I cannot run windows update. This error code 800736B3 is the result every time. I have ran cmd spf scan, I have ran the window repair tools. Nothing will do it. Can someone please help?

A:Windows update error code 800736B3

Hello and welcome tenlakes mate I see you have done the sfc and I would suggest you run this as well if you haven't already
http://www.sevenforums.com/tutorials/433-disk-check.html < if necessary include the /f and /r in the command line as per Option2

just for another option you could run these they don't take long and will eliminate anything from that direction
http://www.superantispyware.com/
http://www.malwarebytes.org/products/malwarebytes_free/
http://www.bleepingcomputer.com/download/adwcleaner/
ADW download from bleeping computer delete any rubbish found with the malware scans
(NB If one is running Kaspersky security it may rant about ADW - just ignore it or disable Kaspersky while the ADW is being used)

http://www.sevenforums.com/windows-updates-activation/368372-windows-update-error-code-800736b3.html
Relevancy 66.22%

Hi
You must get this a lot but I've tried every method mentioned before here.

I get this error when installing updates. Can someone guide me on how to troubleshoot it?

A:Windows Update Error Code 800736B3

What updates are you trying to install?

http://www.eightforums.com/windows-updates-activation/67057-windows-update-error-code-800736b3.html
Relevancy 66.22%

i run Windows 7 Ult 64bit w/PS1. My comps been running great, installing updates perfectly till now.. I have read alot of posts on this and i have tried everything that people have posted as remedies, but nothing seems to work. I am hoping i dont have to re-install Windows again, cause i just did it a week ago.. any help on this would be greatly appreciated

Operating System - MS Windows 7 Ultimate 64-bit SP1

CPU - Intel Core 2 Quad Q6600 @ 2.40GHz 38 ?C
Kentsfield 65nm Technology

RAM - 6.00 GB Dual-Channel DDR2 @ 332MHz (5-5-5-15)

Motherboard - Dell Inc. 0TP406 (CPU)

Graphics - DELL SE198WFP ([email protected])
1024MB GeForce GT 430 (nVidia) 36 ?C

Hard Drives - 313GB Seagate ST3320620AS (RAID) 37 ?C

Optical Drives - TSSTcorp DVD+-RW TS-H653B

Audio High - Definition Audio Device

A:Windows Update Error Code 800736B3

AS you have no replys, take a look at this link, do any of the methods in the accepted answer do anything for you.

Windows update fails to install updates with error code 800736B3 - Microsoft Answers

http://www.techsupportforum.com/forums/f217/windows-update-error-code-800736b3-606350.html
Relevancy 66.22%

Hello,

My Windows 7 x64 Home Premium updates are failing with error code 800736B3

I've tried the "Update Readiness Tool for Windows 7 x64" and they still fail.

I've tried SFC /SCANNOW and they still fail.

Please Help!!

Thank You!

Rob S.

A:Windows 7 Updates Failing Error 800736B3

Hello Rob,

Lets run SURT to see if it gives an indication of a corruption:

Download and run System Update Readiness Tool (SURT)
Please go Here and download the System Update Readiness Tool (SURT). Save this file to your desktop
Go to your desktop and run KB947821
When the SURT finishes installing, Please continue.
SFC /SCANNOW

Click on the button. Inside the search box type in CMD
Right click on CMD => Choose Run as Administrator
Inside the Command Prompt windows copy and paste the following command SFC /SCANNOW
Please wait for this to Finish before continuing with the rest of the steps.

Export CBS folder
Click the Start button then click Computer.
Double-click on the C: drive, under the Hard Disk Drives category, and then scroll down to, and double click on the Windows folder.
Find and double click on the Logs folder.
Right-click on the CBS folder, and select Copy.
Go back to your Desktop, right-click on it, and select Paste. You should now see a copy of the CBS folder appear on your Desktop called CBS.
Right-click on this new folder, and navigate through Send to, and select Compressed (zipped) folder.
A new file, also called CBS (CBS.zip), but this time with a different icon, will be created.
Attach this to your next post please.
Please Note:: if the file is too big to upload to you next please post please upload via Dropbox or ge.tt

http://www.techsupportforum.com/forums/f217/windows-7-updates-failing-error-800736b3-886089.html
Relevancy 65.36%

Hi I have Windows bit Lenovo ideapad that is not allowing system updates and Windows 9C57 800736B3 codes update Error This has been going on for awhile I do some research on the problem and attempt to fix it myself When I am unsuccessful I become frustrated so then I don't try again for several months Meanwhile Windows update Error codes 800736B3 and 9C57 my computer performance is getting worse and worse What I've tried so far Windows updater troubleshooter Service registration missing or corrupt-FIXED Problems installing recent updates-FIXED Starting computer in clean boot to try to install updates Temporarily disabling antivirus software AVG Antivirus Free Edition and trying to run the updates I've downloaded and tried to run the SURT not sure if it actually DID run SFC scan did not find any integrity violations I was unable to upload CBS zip file to this thread I tried a few times Connection was reset I have not yet tried to restore the registry because I'm not confident on how to do it although I did backup my computer on an external hard drive Please let me know if you require any additional information Any insight advice or help would be greatly appreciated Thanks

A:Windows update Error codes 800736B3 and 9C57

Please follow the WindowsUpdate Posting Instructions and post the requested data



If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for anumber of reasons)



Please also post the C:\Windows\windowsudpate.log file

http://www.sevenforums.com/windows-updates-activation/374550-windows-update-error-codes-800736b3-9c57.html
Relevancy 65.36%

I have been experiencing trouble with Windows Update for some time I have important updates that do no install correctly I have spent the better found: 80070005 / Windows 800736B3 - Update Error(s) portion of yesterday and today trying to figure out a couple of issues that I'v had and this is the only one remaining but I haven't been able to get it fixed I have tried the Windows Update Troubleshooter I have tried disabling security software I have tried System Update Readiness Tool for Windows for x -based Systems I have tried CMD sfc scannow did not find any integrity violations I have tried CMD CHKDSK C R as Windows Update - Error(s) found: 800736B3 / 80070005 well as Microsoft NET Framework Repair Tool I doubt this is important but just in Windows Update - Error(s) found: 800736B3 / 80070005 case I will note that days ago I cloned my Windows Update - Error(s) found: 800736B3 / 80070005 hard drive and am now running off of the new one However this issue existed long before the clone Error s found are- Code B Code The important updates are- Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Update for Windows for x -based Systems KB Update for Windows for x -based Systems KB Update for Windows for x -based Systems KB

A:Windows Update - Error(s) found: 800736B3 / 80070005

Try these:
 
For Code 800736B3: http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_update/windows-update-error-code-800736b3-failes-to/98573891-eead-4257-8bf2-1fbac3f2a96a
Skip the SFC step and System Readiness steps, and try the clean boot and safe mode options.
 
For Code 80070005: http://answers.microsoft.com/en-us/windows/forum/windows_other-windows_update/windows-update-error-code-80070005/3b00bcc8-f44a-4134-af68-e727605ad647
There are links to a number of troubleshooting steps and some automated fix-it tools.

http://www.bleepingcomputer.com/forums/t/538324/windows-update-errors-found-800736b3-80070005/
Relevancy 65.36%

Hello,

I seem to be running into a popular issue with Windows Update- 800736B3. WU is not completely broken, as it's still able to install updates to Security Essentials and non-system software (IE11, Office). All system updates, however, are failing. I've ran SURT and SFC scan, but both didn't report any outright errors. The logs should be attached to this post in the .zip

Any help would be greatly appreciated! Thank you in advance!

A:Windows Update constant failures, Error 800736B3

There are no errors in CheckSUR or the SFC scan, and nothing significant in the background CBS data.

Please post your C:\Windows\windowsupdate.log file - it may tell us where the problem lies.

http://www.sevenforums.com/windows-updates-activation/334595-windows-update-constant-failures-error-800736b3.html
Relevancy 65.36%

Hi after successfully installing windows my first windows install since XP after which I moved to Ubuntu and doing the initial set-up etc installing my own anti virus software and MS Office etc I thought it was time to let it update itself however every time I tell it to update then shut down it fails I tried to troubleshoot updates failing 800736B3 with 7 Windows code error it using the MS help box which was very little actual help and then tried to initiate the update manually however when it comes to installing some windows security and system updates and some IE updates installation fails resulting in error code B whatever that means The updates it fails on are Quote security update for INternet explorer for windows KB security update for windows KB security update for windows KB update for Windows 7 updates failing with error code 800736B3 internet explorer compatability view list for windows KB update for internet explorer for windows KB update for windows KB I'm currently running avast v home edition following win informing me that it would not allow AVG to run it was from an 'untrusted source' apparently despite having been working a few days previously but thats another problem entirely Any help than can be offered will be much obliged All I've been able to Windows 7 updates failing with error code 800736B3 turn up from googling is a command that un-registers windows which then for some reason allows the updates to occur following which I can use my original activation code given to me by digital river with the student upgrade deal to re-activate windows although I am reluctant to try this Many thanks civint

A:Windows 7 updates failing with error code 800736B3

Have never had Avast free home interfere with anything, but you can disable it to try the Updates by right clicking it's icon in system tray and "turn off real time protection"

I note that another recent thread on this error found by Googling also remains unresolved.

If you bought your Win7 retail, you are entitled to MS excellent tech support which will work the case through to satisfaction. Those Updates are standard and can wait a few days.

http://www.sevenforums.com/installation-setup/36366-windows-7-updates-failing-error-code-800736b3.html
Relevancy 64.93%

Hi there,

I have a problem with Windows Update - it continually fails to install update KB2966583 (which is about 2.5MB) and brings up error code 800736B3. I have tried the update troubleshooter for Windows, the update readiness tool and hotfix.

Can anyone help me with this? Thanks in advance.

A:Windows Update KB2966583 fails, error code 800736B3

Please follow the Windows Update Posting Instructions and post the requested data
If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

http://www.sevenforums.com/windows-updates-activation/346121-windows-update-kb2966583-fails-error-code-800736b3.html
Relevancy 64.93%

Hi, I am having a problem with installing the English language pack on Windows 7 Ultimate SP1. It is now in Polish since I am polish and the edition I have is called Windows 7 Ingresso which is basicaly a cut down version of Win7 with some great programs preinstaled and is also really fast. The thing is I like doing youtube tutorials to some programs and things like that, but can't because Windows is in Polish...

I tried installing the English Language Pack through Windows Updates but it gives me an error code 800736B3

Anyone got any ideas?

Any help much appriciated thanks

A:Windows 7 SP1 - English Language Pack Installation Error : 800736B3

Hello baertekxx12,

Peruse the link below to see if it provides any useful information.






Quote:
Microsoft has no publicly available information for error code 800736B3.
Other threads in Answers forums very strongly suggest that error code 800736B3 is a symptom of system corruption/damage, most often caused by, e.g., one or more Norton realtime-protection processes, an infection, and/or injudicious use of "Registry cleaners" (e.g., Registry Mechanic; System Mechanic; RegCure; Advanced SystemCare; AVG PC TuneUp; PCTools Optimiser; CCleaner).


Error installing any language pack using windows update - Microsoft Answers

http://www.sevenforums.com/windows-updates-activation/194947-windows-7-sp1-english-language-pack-installation-error-800736b3.html
Relevancy 64.93%

Hello I'm having a problem installing Windows Updates on my Windows Home Premium -bit PC - the update process ends with the error code B see attached screenshot I have tried following several suggested courses of action I obtained from several sources none of which has resolved the problem including Methods amp of Microsoft's Windows update error code B failes to install KB - Microsoft Community sfc scannow 800736B3 Update Code - 7 64-bit Error Home Windows Premium - gt no errors reported System Update Readiness Tool - gt downloaded installed successfully - no errors reported After running both of these restarted my PC and then tried to install the Windows updates again - no luck same Windows 7 Home Premium 64-bit Update - Error Code 800736B3 error reported So now I will see if anyone here can help me Thank-you very much in advance for any assistance you can provide Kevin p s the CBS zip file I created as per the Windows Update Posting Instructions was MB so too large to post There are several large cab files in that folder CbsPersist cab - can I exclude those from the zip file Edit Added CBS zip file with log files Windows 7 Home Premium 64-bit Update - Error Code 800736B3 only from C Windows Logs CBS folder

A:Windows 7 Home Premium 64-bit Update - Error Code 800736B3

I'm trying to figure out what exactly this error code means... it's not as easy to find like BSOD bugcheck codes, lol.

What updates failed exactly?

http://www.sevenforums.com/windows-updates-activation/364460-windows-7-home-premium-64-bit-update-error-code-800736b3.html
Relevancy 64.07%

Windows Professional x SP GB RAM Intel Core i GB free space on SSD Office Samsung Galaxy Note KIES Hi My Windows x PC has been working codes: failing 800736B3, Windows Error Update 80070246 with 8007371B, fine until recently The trouble started with attempting to use my Samsung Galaxy Note and sync using Samsung's Windows Update failing with Error codes: 8007371B, 800736B3, 80070246 KIES using a USB connection It was a bit glitchy but I finally got the thing to sync But today it didnt want to know Windows Update failing with Error codes: 8007371B, 800736B3, 80070246 and kept saying that my phone had quot No SIM card installed quot which is not true as the phone was picking up a mobile phone signal fine In Task Manager I discovered a thing called TrustedInstaller exe which is persistently taking up to of my processor I looked online and discovered that it was the correct size and that it was something to do with Windows Updates So ran Windows Update and discovered that it wanted to install about patches This is odd because I run Windows Update every or weeks Error code B Error code B But when I ran Windows Update two things failed So I executed a Restore Point to days ago and I ran Window Update again Same problem except that now there are THREE error codes Error code B Error code B Error code So this time I followed the windows error code links and although there was nothing describing my error codes I ran Microsoft FixIt and did Windows Update again Still the same problem So then I download ms System Update Readiness Tool for Win x - KB CLUE When I try to do the Windows Update it doest seem to even download anything and gets stuck at quot Downloading updates KB total complete quot I'm thinking that something is must be wrong if it thinks it needs to download quot KB quot - Any thoughts J

A:Windows Update failing with Error codes: 8007371B, 800736B3, 80070246

Please post the CheckSUR.log and CheckSUR.persist.log files as attachements to your reply.

http://www.sevenforums.com/windows-updates-activation/258141-windows-update-failing-error-codes-8007371b-800736b3-80070246-a.html
Relevancy 64.07%

Windows 7 SP1 Home Premium.
I am no longer getting any security updates because the update for Windows Update fails with Error Code 800736B3.

SFC /SCANNOW reports no errors.
C:\Windows\system32>sfc /scannow
Beginning system scan. This process will take some time.
Beginning verification phase of system scan.
Verification 100% complete.
Windows Resource Protection did not find any integrity violations.

I have attached the CBS folder without the CbsPersist.cab files.

I have already tried the Microsoft KB How to update the Windows Update Agent to the latest version

Attachment 333503

A:Windows Update Agent 7.6.7600.320 Fails - Error Code 800736B3

There's nothing apparently amiss in any of the uploaded files.
Please upload the CBSPersist files, and the C:\Windows\windowsupdate.log file

http://www.sevenforums.com/windows-updates-activation/345786-windows-update-agent-7-6-7600-320-fails-error-code-800736b3.html
Relevancy 58.05%

I've run the System file checker and that didn't find anything, I fully reset the windows update service to where it says I've never updated. I've tried the Readniss update tool and I'm repairing .Net now. Any suggestions? Whats the next step?

A:Tried many things, still error 800736B3

Windows Update Posting Instructions

http://www.sevenforums.com/windows-updates-activation/282189-tried-many-things-still-error-800736b3.html
Relevancy 58.05%

hello

i'm stuck with these 4 updates. i've tried fixit, the big 500mo windows update correction program, manual installation etc nothing works
i also have huge log files in my cbs folder (almost 5Go) . the cbs.log is almost 1Go

here are the updates :
kb2977629
kb2972211
kb2973112
kb2982378

thanks you for your help !

A:error 800736B3 on 4 updates

Please follow the Windows Update Posting Instructions and post the requested data
If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

http://www.sevenforums.com/windows-updates-activation/346737-error-800736b3-4-updates.html
Relevancy 57.19%

Hello!

I have tried several days to run the KB3000869 update to my Win 7 laptop without success. It always fails and the error code is every time 800736B3.

I have run ccleaner, sfc /scannow, SURT and several other tools but none of them has helped.

My CBS logs can be found here:
https://www.sendspace.com/file/n2sh16

Can you help me?

Regards,

Jari

A:Error 800736B3 when updating KB3000869 to my Win 7

CheckSUR shows the following problems...

Code:
Unavailable repair files:
servicing\packages\Package_for_KB3000869~31bf3856ad364e35~amd64~~6.1.1.0.mum
servicing\packages\Package_for_KB3000869~31bf3856ad364e35~amd64~~6.1.1.0.cat
I can find no SFC results - but your CBS.log is a mass of errors...

Code:
2014-11-07 22:54:49, Info CBS Appl: Selfupdate, Component: x86_microsoft-windows-packager_31bf3856ad364e35_0.0.0.0_none_11ea043118e85a4e (6.1.7601.22809), elevation:3, lower version revision holder: 6.1.7601.18601
2014-11-07 22:54:49, Info CBS Setting ExecuteState key to: CbsExecuteStateInitiateRollback | CbsExecuteStateFlagAdvancedInstallersFailed
2014-11-07 22:54:49, Info CSI 0000000e Performing 1 operations; 1 are not lock/unlock and follow:
Install (5): flags: 0 tlc: [463c680c5e60b54714ba3d0d41563004, Version = 6.1.7601.18601, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral]) ref: ( flgs: 00000000 guid: {d16d444c-56d8-11d5-882d-0080c847b195} name: [l:154{77}]"Package_1_for_KB3000869~31bf3856ad364e35~amd64~~6.1.1.0.3000869-2_neutral_GDR" ncdata: [l:4{2}]"17") thumbprint: (null)
2014-11-07 22:54:49, Error CSI [email protected]/11/7:20:54:49.743 (F) d:\win7sp1_gdr\base\wcp\componentstore\storelayout.cpp(8701): Error STATUS_SXS_ASSEMBLY_NOT_FOUND originated in function ComponentStore::CRawStoreLayout::QueryComponentUnstagedFiles expression: (null)
[gle=0x80004005]
2014-11-07 22:54:52, Error CSI 00000010 (F) STATUS_SXS_ASSEMBLY_NOT_FOUND #53126# from CCSDirectTransaction::PerformChangeAnalysis(...)[gle=0xd0150004]
2014-11-07 22:54:52, Error CSI 00000011 (F) STATUS_SXS_ASSEMBLY_NOT_FOUND #53125# from CCSDirectTransaction::PrepareForCommit(...)[gle=0xd0150004]
2014-11-07 22:54:52, Error CSI 00000012 (F) STATUS_SXS_ASSEMBLY_NOT_FOUND #53124# from CCSDirectTransaction::ExamineTransaction(...)[gle=0xd0150004]
2014-11-07 22:54:52, Error CSI 00000013 (F) STATUS_SXS_ASSEMBLY_NOT_FOUND #53123# from CCSDirectTransaction_IRtlTransaction::ExamineTransaction(...)[gle=0xd0150004]
2014-11-07 22:54:52, Error CSI [email protected]/11/7:20:54:52.380 (F) d:\win7sp1_gdr\base\wcp\componentstore\storelayout.cpp(8701): Error STATUS_SXS_ASSEMBLY_NOT_FOUND originated in function ComponentStore::CRawStoreLayout::QueryComponentUnstagedFiles expression: (null)
[gle=0x80004005]
We'll see what effect fixing the CheckSUR errors has - I'll post a fix soon.

http://www.sevenforums.com/windows-updates-activation/351549-error-800736b3-when-updating-kb3000869-my-win-7-a.html
Relevancy 57.19%

Can anyone help me with these errors? I have had this error for about a day and have found know help on Google so please if you can help in anyway, thanks in advance!

A:How to fix the error codes 80072EFE and 800736B3

The 80072EFE error is simply a bad internet connection - although that can be due either to physical problems or software interferences by malware, firewalls, etc.

The 800736B3 error is somewhat different.

Please follow the Windows Update Posting Instructions and post the requested data.

http://www.sevenforums.com/windows-updates-activation/290374-how-fix-error-codes-80072efe-800736b3.html
Relevancy 57.19%

Im getting this error code 800736B3. Can anyone help me.

A:error code 800736B3 installing SP1

Put the win7 disc in and choose upgrade then after that it will restart.

After you have acepted the upgrade it will allow you to install the sp1 .

Once win7 has upgraded ,but still keeping your system in tact ,will start the whole update process. After about a hour or two of updates it will install sp1 with no issue .

Also if you are useing a highend gaming card virus protect etc it might keep it from installing as well

http://www.sevenforums.com/windows-updates-activation/149630-error-code-800736b3-installing-sp1.html
Relevancy 57.19%

error installing updates KB2998812 , KB2977759 and KB976932 reverting changes

attaching CBS Logs collection

A:error code 80073AA2 and 800736B3

KB2998812 , KB2977759 installed, error code 80073AA2 solved by deleting WINEVT folder in registry

http://www.sevenforums.com/windows-updates-activation/354865-error-code-80073aa2-800736b3.html
Relevancy 57.19%

I have lurked in this forum in the past - always finding answers. Thanks to all the experts contributing to this forum.

This time I joined so I could post, as I have been unable to find a solution to my problem.

I can install all updates except for SP1. I keep getting error 800736B3.

I ran the Update Troubleshooter, which claims to have repaired Win Update components - still same error.

I then successfully ran the hotfix KB947821. The same error occurs.

I ran sfc /scannow & no integrity violations were found.

I also tried again after a clean boot - same error.

I don't have a clue as to what to try now. Any suggestions?

A:Error Code 800736B3 on SP1 Update

Try reading here

Hopefully stuff in there will help.

http://www.sevenforums.com/windows-updates-activation/146628-error-code-800736b3-sp1-update.html
Relevancy 57.19%

Hi Win SP fails installation with Error Code B I have tried a the solutions as suggested by microsoft without luck I also re-installed Win Ultimate using the Upgrade Win Installation 800736B3 SP1 7 Error Code option but the situation is unchanged According to the log of CheckSUR there is CSI missing identity and CSI Payload files missing CSI Below is the CheckSUR file contents Checking System Update Readiness Binary Version Package Version - - Checking Windows Servicing Packages Checking Package Manifests and Catalogs Checking Package Watchlist Checking Component Watchlist Checking Packages Checking Component Store f CSI Payload File Missing x jsproxy dll x microsoft-windows-i tocolimplementation bf ad e none a bc d dc f CSI Missing Identity x appid prnxx inf bf ad e ad fefc dc f CSI Payload File Missing x iiswmi mfl x microsoft-windows-i atibility resources bf ad e ar-sa a c b f fc Summary Seconds Win 7 SP1 Installation Error Code 800736B3 executed Found errors CSI Missing Identity Total count CSI Payload File Missing Total count CheckSUR persist contents Checking System Win 7 SP1 Installation Error Code 800736B3 Update Readiness Binary Version Package Version - - Checking Win 7 SP1 Installation Error Code 800736B3 Windows Servicing Packages Checking Package Manifests and Catalogs Checking Package Watchlist Checking Component Watchlist Checking Packages Checking Component Store f CSI Payload File Missing x jsproxy dll x microsoft-windows-i tocolimplementation bf ad e none a bc d dc f CSI Missing Identity x appid prnxx inf bf ad e ad fefc dc f CSI Payload File Missing x iiswmi mfl x microsoft-windows-i atibility resources bf ad e ar-sa a c b f fc Summary Seconds executed Found errors CSI Missing Identity Total count CSI Payload File Missing Total count Checking System Update Readiness Binary Version Package Version - - Checking Windows Servicing Packages Checking Package Manifests and Catalogs Checking Package Watchlist Checking Component Watchlist Checking Packages Checking Component Store f CSI Payload File Missing x jsproxy dll x microsoft-windows-i tocolimplementation bf ad e none a bc d dc f CSI Missing Identity x appid prnxx inf bf ad e ad fefc dc f CSI Payload File Missing x iiswmi mfl x microsoft-windows-i atibility resources bf ad e ar-sa a c b f fc Summary Seconds executed Found errors CSI Missing Identity Total count CSI Payload File Missing Total count How can I resolve this and install SP Thanks erwin

A:Win 7 SP1 Installation Error Code 800736B3

We need the CBS.log as well please...

Please follow the Windows Update Posting Instructions and post the requested data

http://www.sevenforums.com/windows-updates-activation/312694-win-7-sp1-installation-error-code-800736b3.html
Relevancy 57.19%

I am running Win Pro SP x on my Macbook Air using Parallels One VM is working perfectly and is accepting all updates the other suddenly stopped accepting updates starting July I have checked Seven Forums Microsoft and Googled and tried all the suggested things NoelDP seems to be successful at helping folks resolve their issues I've run SURT a number of time in different combinations restart no restart SFC scan did not return any problems I cleared the updates and the downloaded files The error codes are all B there were a few others that have disappeared since I tried the different methods to resolve see screen shot from My CBS zip file is MB and to big to upload I will - Error resistant to solution 800736B3 attach a log file that I copied I noticed that some of the KB in the list of pending updates are for x but that does not seem completely unusual I manually downloaded and installed and X and it failed too KB There is a screenshot of update history included I will gladly post Error 800736B3 - resistant to solution all the links that I used if desired Your help is appreciated because I must have spent hours configuring this VM of Windows before it started failing the updates

A:Error 800736B3 - resistant to solution

I have uncovered something that may help with the issue.
Using https://support.microsoft.com/en-us/kb/827218 the automatic detection says I have 32-bit OS but when I check manually it displays that I am using a 64-bit system. See attached images

http://www.sevenforums.com/windows-updates-activation/376928-error-800736b3-resistant-solution.html
Relevancy 56.76%

Vista Update Error 800736B3 KB2803821 Really struggling to fix Windows Vista update errors. There are 9 consistently failing important updates (plus it looks like many others on the attachments named screen?). I have followed all the scan and registry fix instructions but it seems to be making no difference.
Error number 800736B3 is shown then KB2803821. Please could someone help with a fix, I have attached the relevant screen shots and codes I think. (Added screen 1 and 2 showing better detail of the failed updates)
Its driving me mad, always trying to update them!
Thank you

A:Vista Update Error 800736B3 KB2803821

Please, there must be someone who can build a patch for this?

http://www.vistax64.com/windows-updates/303952-vista-update-error-800736b3-kb2803821.html
Relevancy 56.76%

Hi,

I'm stuck with 43 waiting updates and the update error 800736B3.
Tried now several approaches from the forum to get it resolved, but no resolution of the issue until now.

sfc /scannow reports no issues.

So I ran the upgrade pack to produce to cbs log.

Maybe one could give me a hint how or if it could be resolved somehow.

Thanks in advance.

Northseasurfer

A:Win 7 Prof. 64bit Update error 800736B3

There's no problems showing in any of the data files.
Please upload your C:\Windows\windowsupdate.log file.

http://www.sevenforums.com/windows-updates-activation/360820-win-7-prof-64bit-update-error-800736b3.html
Relevancy 56.76%

Hello, I am having a small issue with Windows update. Windows 7 Home Premium, 64BIT OEM on HP Pavilion.

Window Update failing error code 800736B3

I have followed the SFC, update readiness, and clean boot procedures listed in the thread I linked above. I believe I have a SIMILAR issue (not the same).

Can anyone give me a light in the proper direction?

SFC found nothing, readiness tool ran and installed hotfix but did not fix issue. I also tried to install updates 1 at a time, to not avail, as well as the clean boot.

Based on my checksur log, I have the following:

Checking Package Watchlist
(f) CBS Watchlist Package Missing 0x80070002 Microsoft-Windows-Embedded-SKU-Foundation-Package~31bf3856ad364e35~amd64~~0.0.0.0 Microsoft-Windows-InternetExplorer-Package~31bf3856ad364e35~amd64~~10.2.9200.16521 Package registry presence failed, possibly an orphaned package on package watchlist

But I am unsure where to go or how to continue at this point. Any sugegstions?

http://www.sevenforums.com/windows-updates-activation/381411-update-error-800736b3-updates-failed.html
Relevancy 56.76%

For months now I've had windows tell me that I have some updates to be installed. Every time I try it fails to update giving me the error code: 800736B3.

A:Error Code: 800736B3 with 7 failed updates

also my cbs.log was too big to fit in that one post so i had to make another one.

http://www.sevenforums.com/windows-updates-activation/343776-error-code-800736b3-7-failed-updates.html
Relevancy 56.76%

Really struggling to fix Windows Vista update errors. There are 9 consistently failing important updates. I have followed all the scan and registry fix instructions but it seems to be making no difference.
Error number 800736B3 is shown then KB2803821. Please could someone help with a fix, I have attached the relevant screen shots and codes I think. (Added screen 1 and 2 showing better detail of the failed updates)
Thank you

A:Vista Update Error 800736B3 KB2803821

this forum is for windows 7 users, you will find the Vista forums here:
Vista Support Forums

http://www.sevenforums.com/windows-updates-activation/376315-vista-update-error-800736b3-kb2803821.html
Relevancy 55.9%

Hi.
I have a problem with Windows Update. It continues to fail with error code 800736B3. I have tried the update troubleshooter for Windows, I have ran scannow, I also have installed the update readiness tool and hotfix.
Still the updates fail.
I would greatly appreciate any help with this.
I have included the CBS flolder contents.
Thank you in advance for any insight!!!!!
Attachment 310809

Attachment 310811

Attachment 310812

Attachment 310813

Attachment 310814

Attachment 310815

Attachment 310819

Attachment 310820

Attachment 310821

A:Window Update failing error code 800736B3

CheckSUR shows this...

Code:
Unavailable repair files:
winsxs\manifests\msil_mscorlib.resources_b77a5c561934e089_6.1.7601.17648_en-us_6687c1de75c8e03a.manifest
winsxs\manifests\msil_mscorlib.resources_b77a5c561934e089_6.1.7601.21768_en-us_4fbc1bb28f6e72ee.manifest
I'll post a fix for it later - I have to get to work now

http://www.sevenforums.com/windows-updates-activation/325648-window-update-failing-error-code-800736b3.html
Relevancy 55.9%

I've been trying to solve this for a few months now but I haven't gotten anywhere. I've followed all the instructions here and they still continue to fail.

Windows Update Posting Instructions
I would really appreciate any insight as to what you think may be causing the issue, reformatting would really set me back since this computer has some industry specific CAD programs that are a pain to setup.

thanks again,Mark

For some reason I cant post an attachment &quot;attach button doesn't respond, in fact none of them do&quot;, I'll add a reply to the thread to see if I can then.

Update: Sorry about the missing attachments, I moved them out of the folder and forgot to attach, there are a couple of older CBS Persist files if you need them.

thanks

Mark

A:Window Update failing error code 800736B3

The error code 9C59 appeared when I tried to add Internet Explorer 11 to the update, prior to that it wasn't there.

http://www.sevenforums.com/windows-updates-activation/360726-window-update-failing-error-code-800736b3.html
Relevancy 55.9%

Hi.
I have a problem with Windows Update. It continues to fail with error code 800736B3. I have tried the update troubleshooter for Windows, I have ran scannow, I also have installed the update readiness tool and hotfix.
Still the updates fail.
I would greatly appreciate any help with this.

A:Window Update failing error code 800736B3

Please follow the Windows Update Posting Instructions and post the requested data

If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

http://www.sevenforums.com/windows-updates-activation/359540-window-update-failing-error-code-800736b3.html
Relevancy 55.47%

When updating windows following errors occur:
800736B3
9C59

Already tried to
Fixit by microsoft
Option three on Windows Update - Reset

Didn't help: windows 7 still not updating.

Found this Window Update failing error code 800736B3. This solved one of my errors. But cannot find ewgaa.zip.

Will start with Windows Update Posting Instructions.

CBS: http://www.speedyshare.com/JSMVC/CBS.zip

Thanks for you help, Jan (Netherlands)

A:Multi error updating win 7 home 64bit: 800736B3 + 9C59

CBS zipped is 16 mb: to large to upload on this forum. You can find it here:

http://www.speedyshare.com/JSMVC/CBS.zip

http://www.sevenforums.com/windows-updates-activation/331198-multi-error-updating-win-7-home-64bit-800736b3-9c59.html
Relevancy 55.04%

Hi chaps this is my first time posting here but have used this website for help in the past I can usually fix my own problems but with these I see there is not straight answer I hope someone can help as this has defeated me I'll try to provide all information in the instructions thread but if you need anything else please ask Really hope you guys can help Error codes B E amp Installed SURT http support microsoft com kb 80070103 8007065E, error update 800736B3, codes Constant failure, Ran sfc scannow Quote C Users Administrator gt sfc scannow Beginning system scan This process will take some time Beginning verification phase of system scan Verification complete Windows Resource Protection did not find any integrity violations Rebooted Ran sfc scannow again Quote C Users Administrator gt sfc scannow Beginning system scan This process will take some time Beginning verification phase of system scan Verification complete Windows Resource Protection did not find any integrity violations Retried updates - Failed with above error codes still At this point I collected logs but I'm still stumped

A:Constant update failure, error codes 800736B3, 8007065E, 80070103

The error codes all relate to registry problems.
There's no errors in the posted logs - please post a couple of the CBSPersist logs, and the C:\Windows\windowsupdate.log file.

Please also list the KB numbers involved.

http://www.sevenforums.com/windows-updates-activation/347622-constant-update-failure-error-codes-800736b3-8007065e-80070103-a.html
Relevancy 53.32%

I am trying to assist a friend in repairing their windows update problems. I've made progress- but I have 5 Important updates that refuse to install...

IE11 - 9C59
KB2937610 - 800736B3
KB2972211 - 800736B3
KB3032323 - 800736B3
KB2791765 - 800736B3

the SURT was run- and got most of the updates to work other than the ones shown above.
sfc /scannow said all files were fine.

SURT has been run 4 or so times- it's not shown any repairs after the first run... as I would expect.

I've looked through the log files, but I am not really sure what I am looking for to indicate what the problem is.

I have attempted to attach the CBS.Zip file but I got a 404 error each time I clicked "Upload". This must be due to the size of the file. Here is a onedrive link to the zip file.

A:Windows Update: 800736B3 and 9C59

The upload is 8 times larger than the forum's 8MB size limit on Zip/RAR files - which is why it wouldn't upload here

Your first run of CheckSUR had the following summary...





Quote:
Summary:
Seconds executed: 1046
Found 31 errors
CSI C Mark Deployment Missing Total count: 31


The next was clear of errors - how did you go about fixing the C Mark errors, since CheckSUR wasn't able to do it?

The CBS.log file shows the expected errors for the updates (apart from the IE one)
e.g.


Code:
2015-07-10 12:40:38, Info CBS Appl: Evaluating package applicability for package Package_2_for_KB2753842~31bf3856ad364e35~amd64~~6.1.2.0, applicable state: Installed
2015-07-10 12:40:38, Info CBS Plan: Package: Package_2_for_KB2753842~31bf3856ad364e35~amd64~~6.1.2.0, current: Installed, pending: Default, start: Installed, applicable: Installed, targeted: Installed, limit: Installed
2015-07-10 12:40:38, Error CSI [email protected]/7/10:16:40:38.687 (F) d:\win7sp1_gdr\base\wcp\componentstore\csd_core.cpp(616): Error STATUS_SXS_ASSEMBLY_NOT_FOUND originated in function CCSDirect::GetDeploymentClosureStatus expression: (null)
[gle=0x80004005]
2015-07-10 12:40:38, Error CSI 0000002d (F) HRESULT_FROM_WIN32(ERROR_SXS_ASSEMBLY_NOT_FOUND) #630188# from Windows::ServicingAPI::CCSITransactionAnalysis_ICSIInventory::GetDeploymentInformation(flags = 0, class = ICSIINVENTORY_GET_DEPLOYMENT_INFORMATION_CLASS_CLOSURE (1), information = {dwFlags=00000000})
[gle=0x800736b3]
2015-07-10 12:40:38, Info CBS Failed to call GetDeploymentInformation on deployment: amd64_79cc1bf455dd56703d940a275924c112_31bf3856ad364e35_6.1.7601.22195_none_015b15d745c7b295 [HRESULT = 0x800736b3 - ERROR_SXS_ASSEMBLY_NOT_FOUND]
2015-07-10 12:40:38, Info CBS Failed to get component state. [HRESULT = 0x800736b3 - ERROR_SXS_ASSEMBLY_NOT_FOUND]
2015-07-10 12:40:38, Info CBS Failed to get current state of the deployment [HRESULT = 0x800736b3 - ERROR_SXS_ASSEMBLY_NOT_FOUND]
2015-07-10 12:40:38, Info CBS Failed to get Transaction State for package: Package_2_for_KB2753842~31bf3856ad364e35~amd64~~6.1.2.0, update: 2753842-3_neutral_LDR [HRESULT = 0x800736b3 - ERROR_SXS_ASSEMBLY_NOT_FOUND]
2015-07-10 12:40:38, Info CBS Failed to get current state. [HRESULT = 0x800736b3 - ERROR_SXS_ASSEMBLY_NOT_FOUND]
2015-07-10 12:40:38, Info CBS Failed to populate updates for package: Package_2_for_KB2753842~31bf3856ad364e35~amd64~~6.1.2.0 [HRESULT = 0x800736b3 - ERROR_SXS_ASSEMBLY_NOT_FOUND]
2015-07-10 12:40:38, Info CBS Failed to add package to execution for package:Package_2_for_KB2753842~31bf3856ad364e35~amd64~~6.1.2.0 [HRESULT = 0x800736b3 - ERROR_SXS_ASSEMBLY_NOT_FOUND]
2015-07-10 12:40:38, Info CBS Failed to process component watch list. [HRESULT = 0x800736b3 - ERROR_SXS_ASSEMBLY_NOT_FOUND]
2015-07-10 12:40:38, Info CSI [email protected]/7/10:16:40:38.762 CSI Transaction @0x116ada0 destroyed
2015-07-10 12:40:38, Info CBS Perf: InstallUninstallChain complete.
This looks to me as if the install is actually stuck in a pending state, and you need to roll it back...


This is the command to run when booted offline at a Repair Environment command prompt

dism.exe /image:C:\ /cleanup-image /revertpendingactions

This is supposed to revert all pended updates, and hopefully allow the system to start again - assuming it works, do another Check for Updates before attempting to install the updates again.

http://www.sevenforums.com/windows-updates-activation/375172-windows-update-800736b3-9c59.html
Relevancy 52.46%

Windows 7 Fail to Update: Code 800736B3 - Getting error on update CBS

A:Windows 7 Fail to Update: Code 800736B3

The SFC log seems incomplete, please run SFC /SCANNOW again
Windows Update Posting Instructions

Step 4 asks you to copy the CBS folder to your desktop and put it in a zip folder.
Upload the zip folder when you post again.

If the zip folder is too big for the forum, upload just the CBS.log from the CBS folder copy on your Desktop.
Please add your SF Systems Specs by following this tutorial: System Info - See Your System SpecsIn the System Manufacturer/Model Number field, manually type Desktop or Laptop adding it to the information already in the field.
Specify Custom Build as the manufacturer if it is not an OEM machine.
The tool does not fill in this information but it is very important if someone has to research drivers or hardware for your machine.
Log on to Sevenforums (SF) and let the tool fill in you System specs on your SF profile.

Full instructions are in the tutorial. It's a simple process and it makes that information readily available on your posts. You don't have to retype the information in any thread.

Click here to view your system specs on SevenForums.

Click on My System Specs in the lower left of any post by any member to see what is presented about their machine.

Thanks

http://www.sevenforums.com/windows-updates-activation/338201-windows-7-fail-update-code-800736b3.html
Relevancy 51.6%

Hi,

I tried a lot of things trying to resolve this issue but nothing worked.
I finally follow the procedure described on this forum, in the hope someone here can help.

I activated the Administrateur account (my system is in French) and ran the CheckSUR and Windows Update from this account as otherwise I can't access the CBS log file.
I joined the requested files,
Thank you by advance.
Alain

A:Windows 7/64 Home Premium Update errors 9C59 & 800736B3

Your SFC scan was clear - but the background CBS data shows some severe problems.
PLease run the CheckSUR tool, and post the results...

Please download and save the CheckSUR tool from http://support.microsoft.com/kb/947821
(you'll need to look in the details for Windows 7, downloading from the Microsoft Download Center)

Run it - The tool can take anywhere from 5 mins to a couple of hours to run (or 'Install') depending on how much it has to do, and may exit silently - it may appear to freeze for most of that time, but be patient.
The result is logged in the C:\Windows\Logs\CBS\CheckSUR.log file - and an archive …\checksur.persist.log file

Then zip the CheckSUR.log and upload it to your reply.

http://www.sevenforums.com/windows-updates-activation/367124-windows-7-64-home-premium-update-errors-9c59-800736b3.html
Relevancy 46.87%

I recently noticed that the system was trying to do updates every day at closedown and found that update was giving a return code of b I have run SURT several times and it doesn't seem to give any code giving return Windows giving restores x00000022 update 800736b3; results or should I be looking somewhere else I ran sfc scannow and extracted the results and they are in sfcdetails txt Windows update giving return code 800736b3; restores giving x00000022 attached SFC Windows update giving return code 800736b3; restores giving x00000022 said there were some files it couldn't fix even though sfcdetails txt says it has fixed all of them CBS zip is much too big to upload using the paperclip - is there another way I tried restoring to an earlier restore point and unfortunately all the attempted updates have flushed my list of restore points - and the oldest few all give me a return code of x Not sure if this is one problem or two I am reluctant to do a System Recovery as it sounds pretty drastic - help would be much appreciated PS Is any more info required

A:Windows update giving return code 800736b3; restores giving x00000022

The only errors in SFC are these...

Code:
2015-06-14 21:41:16, Info CSI 000005e7 [SR] Repairing 1 components
2015-06-14 21:41:16, Info CSI 000005e8 [SR] Beginning Verify and Repair transaction
2015-06-14 21:41:16, Info CSI 000005ea [SR] Cannot repair member file [l:24{12}]"utc.app.json" of Microsoft-Windows-Unified-Telemetry-Client, Version = 6.1.7601.18839, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2015-06-14 21:41:16, Info CSI 000005ec [SR] Cannot repair member file [l:66{33}]"telemetry.ASM-WindowsDefault.json" of Microsoft-Windows-Unified-Telemetry-Client, Version = 6.1.7601.18839, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
...which are caused by an MS update which they messed up the file-coding on and may get around to fixing sometime.
It's not critical, but you could get rid of it by uninstalling KB3022345 and/or KB3068708 and hiding the latter when it reappers in your offered updates list.

Please post the C:\Windows\Logs\CBS\CheckSUR.log and C:\Windows\Logs\CheckSUR.Persist.log files.

http://www.sevenforums.com/windows-updates-activation/372918-windows-update-giving-return-code-800736b3-restores-giving-x00000022.html
Relevancy 45.15%

Hello! At once I want to warn you that I make mistakes in my statements, but I do not know very well English and forums of my country I have not found anything that could to help me.
The problem is that I can not install more than twenty-five updates update. All they fail and it gives me ERROR 800736B3. I've seen on this forum topics where solved similar errors so I hope that finally someone help me fix this bug.
Here I put a file cbs.log recently after the sfc / scannow

CBS.txt

Please help!

http://www.sevenforums.com/windows-updates-activation/388355-800736b3.html
Relevancy 44.29%

Hello all, I am posting for my father-in-law who is having difficulty with these windows updates.

The error code is 800736B3.

I downloaded and ran SURT a few times, each time it reported success however the error is still active and there are 10 updates pending on windows update.

i also scanned several times sfc /scannow and nothing exciting came up.

Uploading my CBS.zip continues to time out so here is a link to google drive with the file:
https://drive.google.com/file/d/0B7V...it?usp=sharing

Thanks in advance for your help.

A:Code 800736B3

Thought it was fixed but i have the same error code again!

http://www.sevenforums.com/windows-updates-activation/339073-code-800736b3.html
Relevancy 43.86%

Hi! Since the beginning of may (May 3rd) every update has failed and they've been stacking up to the point where there's now 25 updates I've missed.

I've googled the issue and tried running "Fixit" and CheckSUR but nothing has helped.
I'm now desperate and annoyed because of all this. That's why I'm coming to you on this forum. You seem to have a lot of knowledge on these topics.

Since I'm new to this, I don't really know which files and logs to attach so if someone explained it to me I'll be able to post them ASAP

A:25 failed updates - 800736B3

I'm not one of the experts you are needing but they will want you to do this first.

A tutorial by tom982

Windows Update Posting Instructions

http://www.sevenforums.com/windows-updates-activation/344038-25-failed-updates-800736b3.html
Relevancy 43.43%

As title. Im using W7 64-bit version and its a cumulative security update for IE8.
Microsoft charges me to try and email my issues, so id thought id try here first.

what should i do to solve this problem? I have disabled my Kaspersky and no change. I have also downloaded it manually and it just says it cant be installed.

A:trying to use update KB980182 gives code 800736B3?!?!?!

Is Windows Defender on? See if disabling it in 'services' helps.

http://www.sevenforums.com/windows-updates-activation/76089-trying-use-update-kb980182-gives-code-800736b3.html
Relevancy 43%

I am dealing with interesting but messy situation with almost new PC PC specs Lenovo ThinkCentre M p Windows Pro x While windows updates were working normally initially they are not working at all anymore - all OS updates are failing and do not install with error code B I have tried different voodoo for me tricks to no avail Manually downloaded individual update fails to install as well Another issue are huge CBS log approx MB before cab files are auto-done What I have done - run SFC scannow several times before and after running SURT result is always quot Windows Resource Protection found corrupt files but was unable to fix some of them quot - all, 800736B3 at 7 errors x64 working Updates and not Win 80246007 Pro run SURT - run quot Windows Update Diagnostic quot result is rather confusing - it keeps mentioning x not fixed but then show as fixed in details - I am attaching screenshots as well deleting renaming specific folders as was advised in several forums Win 7 Pro x64 Updates not working at all, errors 800736B3 and 80246007 restarting WU BITS services The issue remains same as before - Windows updates are still not installing Mostly they fail with B sometimes with same quot KB quot update Fresh CheckSUR log is clean but I am attaching CheckSUR persist with some issues for reference I am also attaching two partial CBS log files after deleting CBS log at some point If older CBSpersist are needed I can provide them but they are big MB - MB per file Can gurus please help Thank you in advance EDIT At moment there are critical updates that do not install

A:Win 7 Pro x64 Updates not working at all, errors 800736B3 and 80246007

Bump: any knowledgeable good soul around?

http://www.sevenforums.com/windows-updates-activation/364554-win-7-pro-x64-updates-not-working-all-errors-800736b3-80246007-a.html
Relevancy 42.14%

I've re-run the updates several times and gone through the System File Check process, run the MS suggested Fix-It, and run the System Update Readiness program, but still can't get these two updates to install. Attached is the CBS.zip.

A:Two security updates fail: KB293135 (800736B3) & KB2926765 (8007000D)

CheckSUR fixed a number of problems - but was also unable to fix a few.
Here's the failure list...

Code:
Unavailable repair files:
winsxs\manifests\amd64_microsoft-windows-shell32_31bf3856ad364e35_6.1.7601.18429_none_ca494925289f2f1e.manifest
winsxs\manifests\wow64_microsoft-windows-shell32_31bf3856ad364e35_6.1.7601.18429_none_d49df3775cfff119.manifest
winsxs\manifests\amd64_microsoft-windows-shell32_31bf3856ad364e35_6.1.7601.22639_none_cac817ea41c4e800.manifest
winsxs\manifests\wow64_microsoft-windows-shell32_31bf3856ad364e35_6.1.7601.22639_none_d51cc23c7625a9fb.manifest
servicing\packages\Package_2_for_KB2926765~31bf3856ad364e35~amd64~~6.1.1.1.mum
servicing\packages\Package_2_for_KB2926765~31bf3856ad364e35~amd64~~6.1.1.1.mum
servicing\packages\Package_for_KB2926765_SP1~31bf3856ad364e35~amd64~~6.1.1.1.mum
servicing\packages\Package_for_KB2926765_SP1~31bf3856ad364e35~amd64~~6.1.1.1.mum
servicing\packages\Package_for_KB2926765~31bf3856ad364e35~amd64~~6.1.1.1.mum
servicing\packages\Package_for_KB2926765~31bf3856ad364e35~amd64~~6.1.1.1.mum
servicing\packages\Package_2_for_KB2926765~31bf3856ad364e35~amd64~~6.1.1.1.cat
servicing\packages\Package_2_for_KB2926765~31bf3856ad364e35~amd64~~6.1.1.1.cat
servicing\packages\Package_for_KB2926765_SP1~31bf3856ad364e35~amd64~~6.1.1.1.cat
servicing\packages\Package_for_KB2926765_SP1~31bf3856ad364e35~amd64~~6.1.1.1.cat
servicing\packages\Package_for_KB2926765~31bf3856ad364e35~amd64~~6.1.1.1.cat
servicing\packages\Package_for_KB2926765~31bf3856ad364e35~amd64~~6.1.1.1.cat
I'll post a fix for them a little later - gotta eat soon!

http://www.sevenforums.com/windows-updates-activation/333171-two-security-updates-fail-kb293135-800736b3-kb2926765-8007000d.html
Relevancy 32.68%

I'm running Windows Pro on my Dell laptop This laptop has update error.. System Checker install integrity Windows error..iTunes File error been in storage and hasn't been turned on in a year Originally all I wanted to do was use iTunes The problem It made me update it in order to use it but I got an error I un-installed it and tried downloading a fresh copy and I get the following error After some Googling I read that not having the latest Windows NET framework might be the problem Sounded reasonable so I fired up Windows Update but that gave me an error and wouldn't start checking for updates I managed to get it to check for updates but now when it starts the process I get the following I Windows update error.. System File Checker integrity error..iTunes install error Googled the error code E and tried a few things to try and fix it I downloaded the windowsupdatediagnostic diagcab found on Microsoft's site here http windows microsoft com en-us windows troubleshoot-problems-installing-updates TC windows- I tried resetting the Windows Update reset tool using MicrosoftFixit found here http go microsoft com linkid I download the system readiness tool found here https www microsoft com en-us download details aspx Windows update error.. System File Checker integrity error..iTunes install error id I tried a clean boot I tried renaming the Windows Update Softwaredistribution folder None of this worked I ran the System File Checker tool SFC exe and the results said I had bad files but I don't know how to fix them It generated a CBS log which is too large for me to post MB so I've uploaded to dropbox here https www dropbox com s upin te z lcx CBS log dl And a sfcdetails log which from what I understand is a easier-to-read version of the CBS log which I've attached in the following post It was also recommended that I run SFCfix from here http www sysnative com niemiro apps SFCFix exe At some point it asked me to insert the windows DVD if I had it which I didn't I'm trying to fix this laptop for a relative of mine and I don't think they have their original CDs I've attached the SFClog here SFCFix version by niemiro Start time - - Microsoft Windows Service Pack - amd Not using a script file AutoAnalysis CORRUPT C Windows winsxs amd microsoft-windows-servicingstack bf ad e none ce c de cb f smipi dll SUMMARY Some corruptions could not be fixed automatically Seek advice from helper or sysnative com CBS amp SFC total detected corruption count CBS amp SFC total unimportant corruption count CBS amp SFC total fixed corruption count SURT total detected corruption count SURT total unimportant corruption count SURT total fixed corruption count AutoAnalysis directive completed successfully Successfully processed all directives SFCFix version by niemiro has completed Currently storing datablocks Finish time - - ----------------------EOF---------------------- I appreciate any help you can offer All of this is just to fix iTunes and I don't even know if any of this will even fix the iTunes problem to begin with But I'd still like to try Thank you for your help SFC details log if you need that - - Info CSI SR Verifying x components - - Info CSI a SR Beginning Verify and Repair transaction - - Info CSI c SR Verify complete - - Info CSI d SR Verifying x components - - Info CSI e SR Beginning Verify and Repair transaction - - Info CSI SR Verify complete - - Info CSI SR Verifying x components - - Info CSI SR Beginning Verify and Repair transaction - - Info CSI SR Verify complete - - Info CSI SR Verifying x components - - Info CSI SR Beginning Verify and Repair transaction - - Info CSI SR Verify complete - - Info CSI SR Verifying x components - - Info CSI a SR Beginning Verify and Repair transaction - - Info CSI c SR Verify complete - - Info CSI d SR Verifying x components - - Info CSI e SR Beginning Verify and Repair transaction - - Info CSI SR Verify complete - - Info CSI SR Verifying x components - - Info CSI SR Beginning Verify and Repair transaction - ... Read more

A:Windows update error.. System File Checker integrity error..iTunes install error

Open the Command Prompt, copy and paste the commands below one at a time followed by pressing Enter after each command.
 
net stop wuauserv
 
rmdir /s %windir%\softwaredistribution\wuredir
 
net start wuauserv

http://www.bleepingcomputer.com/forums/t/576057/windows-update-error-system-file-checker-integrity-erroritunes-install-error/
Relevancy 32.68%

Symptom:
The URL of a shared folder on the LAN,  copied into Windows Explorer address bar produces the Network Error in the above title.
Network Error: WIndows cannot access
\\server.LAN.com\MySharedFolder   Error Code: 0x8004005 - Unspecified error.
But from a Dos terminal, Windows Explorer can open the same location just fine.  From DOS terminal:
start

https://social.technet.microsoft.com/Forums/en-US/b15bbdfa-e1de-445c-948e-f9eb02a4dd67/network-error-windows-cannot-access-serverlancommysharedfolder-error-code-0x80004005-?forum=MTCWin8
Relevancy 30.96%

Hi I'm currently trying to fix a computer that has the Windows Error Recovery error which doesn't let me login All of this started after Windows Error 7 to How Recovery" error bypass in "Windows screen cleaning a virus The computer was acting goofy so I decided to scan it using the Microsoft Security How to bypass "Windows Error Recovery" error screen in Windows 7 Essentials and it actually found one but it said that it was partially removed and it suggested to download a utility I don't remember the name to do an offline scan I downloaded this utility to a USB drive and boot from the USB it did its thing and it actually found the virus again and this How to bypass "Windows Error Recovery" error screen in Windows 7 time it removed it completely after this I tried rebooting my computer and it s when I got the Windows Error Recovery error Windows Error Recovery Screen All I see is a screen with the following options Launch Startup Repair recommended Start Windows Normally When I select How to bypass "Windows Error Recovery" error screen in Windows 7 the first option it tries to fix the error but after a while it shows a message saying that the problem couldn't be repaired The second option basically brings me back to the same screen described above The other thing I have tried is the Advance Boot Options Safe Mode Safe Mode with Networking Safe Mode with Command Prompt Enable Boot Logging etc But all of the above options take me back to the Windows Error Recovery screen Any idea how can I bypass this screen All I want is basically be able to login to backup my files and then reformat it I refused to the idea of reformatting without saving my personal files FYI - I'm NOT concern about recovering my programs files only Thanks a lot in advance

A:How to bypass "Windows Error Recovery" error screen in Windows 7

Download an ISO for Linux Mint and burn it to a DVD or install to USB (you can use Rufus for this).
 
Boot the computer fromthe DVD/USB and you will then be able to copy all your data to a USB flash drive/external disk.

http://www.bleepingcomputer.com/forums/t/525768/how-to-bypass-windows-error-recovery-error-screen-in-windows-7/
Relevancy 29.67%

Quote:
Fix Windows 7 Error ?Windows is Not Genuine? Error code 0?80070005
Slowly Windows 7 bugs are getting uncovered, recently we had provided fix for Windows 7 WMP 12 flickering issue, Windows 7 Black Screen of Death issue. Now here is yet another issue found in Windows 7. The issue is related Windows 7 activation and genuine copy.


Source -
Official Windows Magazine | Fix Windows 7 Error ?Windows is Not Genuine? Error code 0?80070005
or -
Convert Pirated Windows 7 to Genuine & Fix Windows is not Genuine Error Code 0x8007000

A:Fix Windows 7 Error “Windows is Not Genuine” Error code

  
Quote: Originally Posted by JMH







Quote:
Fix Windows 7 Error ?Windows is Not Genuine? Error code 0?80070005
Slowly Windows 7 bugs are getting uncovered, recently we had provided fix for Windows 7 WMP 12 flickering issue, Windows 7 Black Screen of Death issue. Now here is yet another issue found in Windows 7. The issue is related Windows 7 activation and genuine copy.


Source -
Official Windows Magazine | Fix Windows 7 Error ?Windows is Not Genuine? Error code 0?80070005
or -
Convert Pirated Windows 7 to Genuine & Fix Windows is not Genuine Error Code 0x8007000


So in essecne,the genuine version is bugged so that it says not genuine,Microsoft give a fix which enables ANY version ,legit or not to be used??

http://www.sevenforums.com/windows-updates-activation/55979-fix-windows-7-error-windows-not-genuine-error-code.html
Relevancy 29.67%

iI can not install any application windows installer. I have windows 8 and it asks me always an error message that will not let me install anything from windows installer. Appears to me always an error message: "Error 1723. There is a problem with this
Windows Installer Package. A DLL required for this install to complete could not be run. Contact your support personnel or package vendor."

There is no problem with the installation package. I installed the same package on another computer. I have a defect in the windows installer will not let me install any program. Anyone know how to fix?
Thanks :)

A:windows 8: error windows installer - Error 1723

this code means RPC_S_SERVER_TOO_BUSY. Have you tried a reboot? This something fixes issues."A programmer is just a tool which converts caffeine into code"

https://social.technet.microsoft.com/Forums/en-US/cc17f20c-d198-4106-86c8-1a356aed25db/windows-8-error-windows-installer-error-1723?forum=w8itprogeneral
Relevancy 29.24%

Hi All system info HP LAPTOP DV - tx windows vista sp bit When I am trying to install windows vista sp from recovery disks partition I am getting the error from recovery manager prompting me to choose either to retry or see the details for failure CTOERROR flg in form of notepad on my desktop I have done retry times but to no avail I cannot restart after this recovery failure that CTOERROR.f​lg error error while and Windows 0x643 insta following recovery vista message as it shows dialog box on restart windows security update is not installed successfully or is not trusted So i have to Windows vista recovery error CTOERROR.f​lg and following that error 0x643 while insta go through recovery process again to see the desktop everything functioning - internet video music all but only once Last time i got this message too When i did installing windows from recovery disks few months back that time i figured out to install all imp updates through automatic windows update All the updates were installed successfully and then it restarted and gone Windows vista recovery error CTOERROR.f​lg and following that error 0x643 while insta through process of language settings time settings and all But this time when i am trying Windows vista recovery error CTOERROR.f​lg and following that error 0x643 while insta to update windows i am getting windows update error x which is for security update for net framewrok sp and family update I do know the answer how to get away with this error from quot windows help quot and also from this forum too which asks for installing net framework updates from windows update site directly But the problem is Windows update ask me to restart after automatic or manual windows update installation takes place and restart causes problem as it shows dialog box - windows security update is not installed successfully I need to install all updates in one go like last time from my understanding So if i install windows update to try my luck as last time it shows x error for net framework and asks to restart and after that when i try to manually install failed updated x it asks me to restart the windows for pending updates Alternatively If i try to install failed update first just after recovery failure it won't allow me to install important updates for vista sp and asks to restart windows All i need is to successfully update all updates through windows automatic update which is not happening at the moment Not even able to upgrade to sp bcz it too restarts for installing Please Help Thanks in advance

A:Windows vista recovery error CTOERROR.f​lg and following that error 0x643 while insta

Do you have the original (no SP1 or SP2) Vista installed? You won't be able to install SP1 otherwise.

http://www.vistax64.com/windows-updates/296786-windows-vista-recovery-error-ctoerror-f-lg-following-error-0x643-while-insta.html
Relevancy 29.24%

I have windows live mail 2008 Build 12.0.1606 installed on windows xp and everytime a few seconds after i close wlm i get a windows live mail encountered a ploblem and has to close error that tells me to send a report..this happens 80 percent of the time after i close the windows live mail application...By the way i have disable error reporting checked on advanced properties and disabled on services also ...i noticed on the task manager that the wlmail exe process is still running after i close the application and that seems to be the problem..Is there any way, fix or some program that i can get the wlmail.exe process to close at the same time i close the windows live mail application so i dont get this send error report message anymore ?

error i get ^

wlmail.exe still running after closing application ^

A:windows live mail 2008 (Build 12.0.1606) error report error

Hi gbp007,

Try to End Process the extra wlmail.exe file in the Task Manager Processes to see if it will stop the error for you next time.

Task Manager - Open and Close Applications and Processes

Shawn

http://www.vistax64.com/software/123461-windows-live-mail-2008-build-12-0-1606-error-report-error.html
Relevancy 29.24%

I get all those messages at start up, plus superfetch has stopped working, and sometimes windows explorer has stopped working. I know it's some type of virus from something. So far safe mode has been working (slowly). Yesterday I had a friend reinstall(?) vista on it so I'm not sure if it would qualify as a legal copy or not anymore but it was actually much worse before that. It couldn't even start up right normal or safe mode.

it is a hp G60t-200, and the OS is vista, I'm not sure what other info would be needed for this. Please help if you can.

http://www.techsupportforum.com/forums/f284/clr-error-80004005-error-0x800106ba-windows-problem-reporting-has-stopped-working-487867.html
Relevancy 29.24%

Anyways yesterday I posted about how I accidently uninstalled some preloaded Windows programs I reinstalled some of them but now my laptop s all funny When I connect to The Internet any program that I open freezes for like minutes after which it unfreezes During this time I normally restart my computer with no success If I open Windows Live Messenger and Internet Explorer together it freezes normally Pinball WordPad Sound Recorder and Volume Control cannot be restored Also I tried using my Toshiba Recovery DVD with no success It says Loading RAMDISK Image then it reboots and loads the exact same system with no changes made I called in to Toshiba support a customer service rep and I redid this process and no success He says there might be a hard drive corruption so severe that it refuses to accept The DVD What can I do My computer specs Toshiba Satellite a Windows XP Home SP Intel Centrino dual-core GHz GB hard drive GB RAM DVD-RAM error, XP disc Windows recovery drive hard not error, working probably multi-layer burner Yada yada Please help and if you require any more information I will be glad to provide it BTW I had this exact Windows XP error, probably hard drive error, recovery disc not working same problem with my previous laptop which was the same kind That one I returned it to Future Shop and I got it exchanged for this one since it was still weeks of my purchase It s been months however so that option is not open Update When I connect to The Internet if I try to open ANY programs it freezes not just IE or WLM nbsp

A:Windows XP error, probably hard drive error, recovery disc not working

My HJT log:

Logfile of HijackThis v1.99.1
Scan saved at 11:19:47 AM, on 29/10/2006
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.5730.0011)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Windows Defender\MsMpEng.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Intel\Wireless\Bin\EvtEng.exe
C:\Program Files\Intel\Wireless\Bin\S24EvMon.exe
C:\Program Files\Common Files\Symantec Shared\ccSetMgr.exe
C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\Program Files\Common Files\Symantec Shared\SNDSrvc.exe
C:\Program Files\Common Files\Symantec Shared\SPBBC\SPBBCSvc.exe
C:\Program Files\Common Files\Symantec Shared\CCPD-LC\symlcsvc.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Symantec\LiveUpdate\ALUSchedulerSvc.exe
C:\WINDOWS\system32\cisvc.exe
C:\WINDOWS\system32\DVDRAMSV.exe
C:\Program Files\Norton AntiVirus\navapsvc.exe
C:\Program Files\Norton AntiVirus\IWP\NPFMntor.exe
C:\Program Files\Intel\Wireless\Bin\RegSrvc.exe
C:\WINDOWS\system32\tcpsvcs.exe
C:\WINDOWS\System32\snmp.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\TOSHIBA\TOSHIBA Applet\TAPPSRV.exe
C:\Program Files\Norton AntiVirus\SAVScan.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\System32\DLA\DLACTRLW.EXE
C:\Program Files\TOSHIBA\TOSHIBA Zooming Utility\SmoothView.exe
C:\Program Files\Toshiba\Tvs\TvsTray.exe
C:\Program Files\Toshiba\Toshiba Applet\thotkey.exe
C:\WINDOWS\system32\TDispVol.exe
C:\Program Files\Synaptics\SynTP\SynTPEnh.exe
C:\Program Files\Intel\Wireless\bin\ZCfgSvc.exe
C:\Program Files\Synaptics\SynTP\Toshiba.exe
C:\Program Files\Intel\Wireless\Bin\ifrmewrk.exe
C:\WINDOWS\system32\TPSMain.exe
C:\Program Files\Windows Defender\MSASCui.exe
C:\WINDOWS\system32\LVCOMSX.EXE
C:\WINDOWS\RTHDCPL.EXE
C:\Program Files\Common Files\Symantec Shared\ccApp.exe
C:\WINDOWS\system32\hkcmd.exe
C:\WINDOWS\system32\igfxpers.exe
C:\Program Files\Slick Run\sr.exe
C:\Program Files\Spybot - Search & Destroy\TeaTimer.exe
C:\WINDOWS\system32\TPSBattM.exe
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\ObjectDock\ObjectDock.exe
C:\PROGRA~1\Intel\Wireless\Bin\Dot1XCfg.exe
C:\Program Files\Common Files\Symantec Shared\Security Console\NSCSRVCE.EXE
C:\WINDOWS\system32\ntvdm.exe
C:\WINDOWS\system32\cidaemon.exe
C:\Program Files\MSN Messenger\msnmsgr.exe
C:\Program Files\Internet Explorer\iexplore.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\MSN Messenger\msvs.exe
C:\Program Files\HijackThis\HijackThis.exe

R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Page = http://go.microsoft.com/fwlink/?LinkId=54896
R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page = file:///C:/Documents%20and%20Settings/Fred%20Liu/My%20Documents/Internet%20Explorer%20start%20page.htm
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://go.microsoft.com/fwlink/?LinkId=69157
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Search_URL = http://go.microsoft.com/fwlink/?LinkId=54896
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Search Page = http://go.microsoft.com/fwlink/?LinkId=54896
O2 - BHO: Adobe PDF Reader Link Helper - {06849E9F-C8D7-4D59-B87D-784B7D6BE0B3} - C:\Program Files\Adobe\Acrobat 7.0\ActiveX\AcroIEHelper.dll
O2 - BHO: SSVHelper Class - {761497BB-D6F0-462C-B6EB-D4DAF1D92D43} - C:\Program Files\Java\jre1.5.0_06\bin\ssv.dll
O2 - BHO: Windows Live Sign-in Helper - {9030D464-4C02-4ABF-8ECC-5164760863C6} - C:\Program Files\Common Files\Microsoft Shared\Windows Live\WindowsLiveLogin.dll
O2 - BHO: NAV Helper - {A8F38D8D-E480-4D52-B7A2-731BB6995FDD} - C:\Program Files\Norton AntiVirus\NavShExt.dll
O3 - Toolbar: Norton AntiVirus - {C4069E3A-68F1-403E-B40E-20066696354B} - C:\Program Files\Norton AntiVirus\NavShExt.dll
O4 - HKLM\..\Run: [DLA] C:\WINDOWS\System32\DLA\DLACTRLW.EXE
O4 - HKLM\..\Run: [SmoothView] C:\Program Files\TOSHIBA\TOSH... Read more

https://forums.techguy.org/threads/windows-xp-error-probably-hard-drive-error-recovery-disc-not-working.513747/
Relevancy 29.24%

So when i try to get Windows Firewall to run on recommended settings i get error x c So far i have 1068 Windows Firewall (manually starting) + error error 0x8007042c tried- all four methods on the microsoft help page here x c error message when you try to start Windows Firewall when i tried manually starting it i got Windows Firewall error 0x8007042c + error 1068 (manually starting) error the dependency service or group Windows Firewall error 0x8007042c + error 1068 (manually starting) failed to start Ive also tried Sharrow's quot Most helpful Reply quot on this page- Windows could not start Error The dependency or group failed - Microsoft Community although i dont have aland line so idk if what i did affected it well or not person who wrote the thing had a wlan so idk if what i did was wrong anyone wanna let me know it didnt help either so i ran sfc scannow on elevated command prompt and got it to my desktop learned how to do that today here is what i got on it can anyone help me figure out what the issue is and how to solve it im only gonna post the stuff it cant repair i dont think yall need the other stuff a third of the way through- - - Info CSI e SR Cannot repair member file l quot PINTLGB IMD quot of Microsoft-Windows-IME-Simplified-Chinese-Core Version pA PROCESSOR ARCHITECTURE AMD Culture neutral VersionScope nonSxS PublicKeyToken l b bf ad e Type neutral TypeName neutral PublicKey neutral in the store hash mismatch - - Info CSI ea SR Cannot repair member file l quot PINTLGB IMD quot of Microsoft-Windows-IME-Simplified-Chinese-Core Version pA PROCESSOR ARCHITECTURE AMD Culture neutral VersionScope nonSxS PublicKeyToken l b bf ad e Type neutral TypeName neutral PublicKey neutral in the store hash mismatch - - Info CSI eb SR This component was referenced by l quot Microsoft-Windows-Foundation-Package bf ad e amd WindowsFoundationDelivery quot - - Info CSI ee SR Could not reproject corrupted file ml l quot C Windows IME IMESC DICTS quot l quot PINTLGB IMD quot source file in store is also corrupted - - Info CSI f SR Verify complete then later - - Info CSI a SR Beginning Verify and Repair transaction - - Info CSI c SR Cannot repair member file l quot PINTLGB IMD quot of Microsoft-Windows-IME-Simplified-Chinese-Core Version pA PROCESSOR ARCHITECTURE AMD Culture neutral VersionScope nonSxS PublicKeyToken l b bf ad e Type neutral TypeName neutral PublicKey neutral in the store hash mismatch - - Info CSI e SR Cannot repair member file l quot PINTLGB IMD quot of Microsoft-Windows-IME-Simplified-Chinese-Core Version pA PROCESSOR ARCHITECTURE AMD Culture neutral VersionScope nonSxS PublicKeyToken l b bf ad e Type neutral TypeName neutral PublicKey neutral in the store hash mismatch - - Info CSI f SR This component was referenced by l quot Microsoft-Windows-Foundation-Package bf ad e amd WindowsFoundationDelivery quot - - Info CSI SR Could not reproject corrupted file ml l quot C Windows IME IMESC DICTS quot l quot PINTLGB IMD quot source file in store is also corrupted - - Info CSI SR Repair complete - - Info CSI SR Committing transaction - - Info CSI SR Verify and Repair Transaction completed All files and registry keys listed in this transaction have been successfully repaired - - Info CSI SR Verifying x components and then also - - Info CSI e SR Beginning Verify and Repair transaction - - Info CSI e SR Cannot repair member file l quot PINTLGB IMD quot of Microsoft-Windows-IME-Simplified-Chinese-Core Version pA PROCESSOR ARCHITECTURE AMD Culture neutral VersionScope nonSxS PublicKeyToken l b bf ad e Type neutral TypeName neutral PublicKey neutral in the store hash mismatch - - Info CSI ea SR Cannot repair member file l quot PINTLGB IMD quot of Microsoft-Windows-IME-Simplified-Chinese-Core Version pA PROCESSOR ARCHITECTURE AMD Culture neutral VersionScope nonSxS PublicKeyToken l b bf ad e Type neutral TypeName neutral PublicKey neutral in the store hash mismatch - - Info CSI eb SR This component was referenced by l quot Microso... Read more

A:Windows Firewall error 0x8007042c + error 1068 (manually starting)

Welcome to the WSF, Junyahh!

Please use the following diagnostic tool. It has a powerful detection mechanism, and may help us get to the cause of your issues:

Please use the Farbar Recovery Scan Tool.
Download: Farbar Recovery Scan Tool Download
Select the version that applies to your system.
Save it to your Desktop.
Double-click the downloaded file to run it.

When the tool opens click Yes to the disclaimer.
At the program's console, press the Scan button.

When done, the tool produces a log, FRST.txt, in the same directory from which the tool is run (Desktop).
Please provide the FRST.txt in your reply.

The first time the tool is run, it also makes another log: Addition.txt
Also post the Addition.txt in your reply.


Also, use the Farbar Service Scanner
Download: Downloading Farbar Service Scanner

Let's get a view of all services and dependencies scoped by the tool...
Make sure the following options are checked:

Internet Services
Windows Firewall
System Restore
Security Center
Windows Update
Windows Defender

Press: Scan

When done, FSS creates a log, FSS.txt, on the Desktop.

Please provide the FSS.txt in your reply.

Thank you.

http://www.sevenforums.com/system-security/317526-windows-firewall-error-0x8007042c-error-1068-manually-starting.html
Relevancy 29.24%

Hi I am running Windows Vista Home Premium on my laptop For last few days I have not been able to install windows updates I get the error with code After wandering through installer System Windows 3: and path find - Error: 80070641 Error specified cannot different forums and suggested solutions I followed this path - control panel gt system and maintenance gt administrative tools gt services gt windows installer double clicked and saw that the start-up type is 'Automatic' When I clicked on the 'Start the service' Windows installer - Error: 80070641 and Error 3: System cannot find path specified button in the left panel here I got the following message Windows could not start the windows installer service on local computer Error The system cannot find the path specified Can anybody help me resolve this problem and bring the Windows Installer back on track By the way later I did this - Click Start Run and type cmd k sc qc msiserver Press ENTER Following is the ouyput I received - SC QueryServiceConfig SUCCESS SERVICE NAME msiserver TYPE WIN OWN PROCESS START TYPE AUTO START ERROR CONTROL NORMAL BINARY PATH NAME C Windows system Msiexec exe V LOAD ORDER GROUP TAG DISPLAY NAME Windows Installer DEPENDENCIES rpcss SERVICE START NAME LocalSystem C Users Shirish gt Does anyone have any idea of what's going wrong here Please help me resolve this issue Thanks Shirish

A:Windows installer - Error: 80070641 and Error 3: System cannot find path specified

Try reinstall Windows Installer Windows Installer 4.5 is available

http://www.vistax64.com/windows-updates/233601-windows-installer-error-80070641-error-3-system-cannot-find-path-specified.html
Relevancy 29.24%

Hi guys,

I was using my computer today and for the first time ever (had computer for 10 months) I had a BSOD. Here is what I found. Anyone have any thoughts?

FAULTING_MODULE: 81c00000 nt

DEBUG_FLR_IMAGE_TIMESTAMP: 0

WHEA_ERROR_RECORD: !errrec ffffffff849784e0

BUGCHECK_STR: 0x124_GenuineIntel

DEFAULT_BUCKET_ID: WRONG_SYMBOLS

STACK_TEXT:
WARNING: Stack unwind information not available. Following frames may be wrong.
81ceef84 81fa6f1f 00000124 00000000 849b3578 nt+0xd8681
81ceefa0 81cced6a 849b3578 84ac2de8 00000001 hal+0x5f1f
81ceefc0 81fa6ede 84ac2de8 84ac2f00 81ceeff4 nt+0xced6a
81ceefd0 81fa6fff 00000003 84ac2de8 00000000 hal+0x5ede
81ceeff4 81fa389f 8014a000 00000000 00000000 hal+0x5fff
00000000 00000000 00000000 00000000 00000000 hal+0x289f


STACK_COMMAND: kb

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: hardware

IMAGE_NAME: hardware

BUCKET_ID: WRONG_SYMBOLS

Followup: MachineOwner

A:windows vista bsod STOP error (error posted)...any thoughts?

Quote:





Originally Posted by ajcool123


Hi guys,

I was using my computer today and for the first time ever (had computer for 10 months) I had a BSOD. Here is what I found. Anyone have any thoughts?

FAULTING_MODULE: 81c00000 nt

DEBUG_FLR_IMAGE_TIMESTAMP: 0

WHEA_ERROR_RECORD: !errrec ffffffff849784e0

BUGCHECK_STR: 0x124_GenuineIntel

DEFAULT_BUCKET_ID: WRONG_SYMBOLS

STACK_TEXT:
WARNING: Stack unwind information not available. Following frames may be wrong.
81ceef84 81fa6f1f 00000124 00000000 849b3578 nt+0xd8681
81ceefa0 81cced6a 849b3578 84ac2de8 00000001 hal+0x5f1f
81ceefc0 81fa6ede 84ac2de8 84ac2f00 81ceeff4 nt+0xced6a
81ceefd0 81fa6fff 00000003 84ac2de8 00000000 hal+0x5ede
81ceeff4 81fa389f 8014a000 00000000 00000000 hal+0x5fff
00000000 00000000 00000000 00000000 00000000 hal+0x289f


STACK_COMMAND: kb

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: hardware

IMAGE_NAME: hardware

BUCKET_ID: WRONG_SYMBOLS

Followup: MachineOwner




Hi. . .

A bugcheck of 0x00000124 = 0x124 indicates that a fatal hardware error has occurred. The reference to WHEA is Windows Hardware Error Architecture. There is an event log for WHEA, under Applications and Services\Microsoft\Windows\Kernel-WHEA. It usually contains entries stating that WHEA was successfully initialized, that x# error sources are active and the record format of WHEA. I have never seen any other entries in it besides ones like these.

In the STACK_TEXT above, 81c00000 nt = 0x81c00000, the starting memory address for nt which is the Microsoft Kernel and system module ntkrnlmp.exe. It is listed as the probable cause because of its expansive memory address range and whatever happened occurred within that memory range. hal = Hardware Abstraction Layer.

I suggest that you look in the Event Viewer, the Device Manager, WERCON (Windows Problem Reports and Solutions) and also PERFMON (Reliability and Performance Monitor - look at both).

As for the graphical interface dbugger - Windbg - use the symbol path -

Code:
SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Then at kd> enter !analyze -v;r;kv;lmtn.

This should resolve the symbol errors and provide you with additional information. Please post the full STOP error code (bugcheck) and the four parameters found in the brackets.

Regards. . .

jcgriff2

.

http://www.techsupportforum.com/forums/f299/windows-vista-bsod-stop-error-error-posted-any-thoughts-277590.html
Relevancy 29.24%

I recently have been getting the Error message Windows has encountered a critical error and will close in one minute.
I do not have the Brazilian financial Active X control that became corrupted, or if I do, I cannot find it. I have Vista 32-bit on an Acer Aspire laptop. This message comes up after I login and I can either access the Internet via Safe mode w/Networking, or do a System Restore, at which time the laptop works for about two or three times and then the error message comes back.
Do I have a bug? Please help!!!!

A:Error Message 0x80070005 critical error - windows will close in one minute

I followed the preparation guide and when I tried to run dds.scr, the black screen came up really fast and then disappeared and nothing ever came up. When I tried to run RootRepeal.exe, I was able to tell it to scan, but then I never received a report. When I tried to run it again, it said that I didn't have permission, and when I tried to delete it, it said the same thing! I am the administrator...I have Vista 32bit and I am getting the error code 0x80070005 windows has encountered a critical error and will now close. I run system restore to get it to stop, but that only works a few times, and then I get the error message again.
What do I do now??

http://www.bleepingcomputer.com/forums/t/266440/error-message-0x80070005-critical-error-windows-will-close-in-one-minute/
Relevancy 29.24%

Hi I Error Windows 80070641 specified cannot Error: System find installer - 3: path and am Windows installer - Error: 80070641 and Error 3: System cannot find path specified running Windows Vista Home Premium on my laptop For last few days I have not been able to Windows installer - Error: 80070641 and Error 3: System cannot find path specified install windows updates I get the error with code After wandering through different forums and suggested solutions I followed this path - control panel gt system and maintenance gt administrative tools gt services gt windows installer double clicked and saw that the start-up type is 'Automatic' When I clicked on the 'Start the service' button in the left panel here I got the following message Windows could not start the windows installer service on local computer Error The system cannot find the path specified Can anybody help me resolve this problem and bring my Windows Installer back on the track By the way later I did this - Click Start Run and type cmd k sc qc msiserver Press ENTER Following is the ouyput I received - SC QueryServiceConfig SUCCESS SERVICE NAME msiserver TYPE WIN OWN PROCESS START TYPE AUTO START ERROR CONTROL NORMAL BINARY PATH NAME C Windows system Msiexec exe V LOAD ORDER GROUP TAG DISPLAY NAME Windows Installer DEPENDENCIES rpcss SERVICE START NAME LocalSystem C Users Shirish gt Does anyone have any idea of what's going wrong here Can you help me resolve this issue Thanks Shirish

A:Windows installer - Error: 80070641 and Error 3: System cannot find path specified

Reinstall Windows installer:Windows Installer 4.5 is available

http://www.vistax64.com/general-discussion/233933-windows-installer-error-80070641-error-3-system-cannot-find-path-specified.html
Relevancy 29.24%

So my laptop has a bunch of problems It started out as a virus infection then I found out more problems First of all thank you to Broni for directing me to the thread that tells me to run DSS I can t run a systems restore I get the x B error As well Systems Restore says that I ve never had a Systems Restore done before which I think is odd because I recall seeing Systems Restores created last time I checked maybe a year ago I also can t turn on Windows Firewall I get the quot Windows can t start the Mpssvc quot message Here s my AVIRA log Avira Free Antivirus Report file date December- - The program is running as a Windows of Error Error, bunch Firewall Restore viruses System and an unrestricted full version Online services are available Licensee Avira Free Antivirus Serial number -ADJIE- Platform Windows Vista Home Premium Windows version Service Pack Boot mode Normally booted Username me Computer name System Restore Error, Windows Firewall Error and a bunch of viruses ME Version information BUILD System Restore Error, Windows Firewall Error and a bunch of viruses DAT System Restore Error, Windows Firewall Error and a bunch of viruses Bytes AVSCAN EXE Bytes AVSCANRC DLL Bytes LUKE DLL Bytes AVSCPLR DLL Bytes AVREG DLL Bytes avlode dll Bytes avlode rdf Bytes VBASE VDF Bytes VBASE VDF Bytes VBASE VDF Bytes VBASE VDF Bytes VBASE VDF Bytes VBASE VDF Bytes VBASE VDF Bytes VBASE VDF Bytes VBASE VDF Bytes VBASE VDF Bytes VBASE VDF Bytes VBASE VDF Bytes VBASE VDF Bytes VBASE VDF Bytes VBASE VDF Bytes VBASE VDF Bytes VBASE VDF Bytes VBASE VDF Bytes VBASE VDF Bytes VBASE VDF Bytes VBASE VDF Bytes VBASE VDF Bytes VBASE VDF Bytes VBASE VDF Bytes VBASE VDF Bytes VBASE VDF Bytes VBASE VDF Bytes VBASE VDF Bytes VBASE VDF Bytes VBASE VDF Bytes VBASE VDF Bytes VBASE VDF Bytes Engine version AEVDF DLL Bytes AESCRIPT DLL Bytes AESCN DLL Bytes AESBX DLL Bytes AERDL DLL Bytes AEPACK DLL Bytes AEOFFICE DLL Bytes AEHEUR DLL Bytes AEHELP DLL Bytes AEGEN DLL Bytes AEEXP DLL Bytes AEEMU DLL Bytes AECORE DLL Bytes AEBB DLL Bytes AVWINLL DLL Bytes AVPREF DLL Bytes AVREP DLL Bytes AVARKT DLL Bytes AVEVTLOG DLL Bytes SQLITE DLL Bytes AVSMTP DLL Bytes NETNT DLL Bytes RCIMAGE DLL Bytes RCTEXT DLL Bytes Configuration settings for the scan Jobname Complete system scan Configuration file C program files x avira antivir desktop sysscan avp Reporting default Primary action Interactive Secondary action Ignore Scan master boot sector on Scan boot sector on Boot sectors C D Process scan on Extended process scan on Scan registry on Search for rootkits on Integrity checking of system files off Scan all files All files Scan archives on Limit recursion depth Smart extensions on Macrovirus heuristic on File heuristic extended Deviating risk categories APPL Start of the scan December- - Starting master boot sector scan Start scanning boot sectors Starting search for hidden objects HKEY CURRENT USER Software Classes VirtualStore MACHINE SOFTWARE Wow Node Apple Computer Inc NOTE The registry entry is invisible HKEY CURRENT USER Software Classes VirtualStore MACHINE SOFTWARE Wow Node CloneAD NOTE The registry entry is invisible HKEY CURRENT USER Software Classes VirtualStore MACHINE SOFTWARE Wow Node CyberLink NOTE The registry entry is invisible HKEY CURRENT USER Software Classes VirtualStore MACHINE SOFTWARE Wow Node FGUpdate NOTE The registry entry is invisible HKEY CURRENT USER Software Classes VirtualStore MACHINE SOFTWARE Wow Node Google NOTE The registry entry is invisible HKEY CURRENT USER Software Classes VirtualStore MACHINE SOFTWARE Wow Node Hewlett-Packard NOTE The registry entry is invisible HKEY CURRENT USER Software Classes VirtualStore MACHINE SOFTWARE Wow Node Microsoft AudioCompressionManager NOTE The registry entry is invisible HKEY CURRENT USER Software Classes VirtualStore MACHINE SOFTWARE Wow Node Microsoft Direct D NOTE The registry entry is invisible HKEY CURRENT USER Software Classes VirtualStore MACHINE SOFTWARE Wow Node Microsoft DirectDraw MostRe... Read more

A:System Restore Error, Windows Firewall Error and a bunch of viruses

Hello, Welcome to BleepingComputer.I'm nasdaq and will be helping you.If you can please print this topic it will make it easier for you to follow the instructions and complete all of the necessary steps.===Please download ComboFix from any of the links below, and save it to your desktop. For information regarding this download, please visit this web page: http://www.bleepingcomputer.com/combofix/how-to-use-combofixLink 1Link 2* IMPORTANT !!! Save ComboFix.exe to your DesktopIMPORTANT....1. Close any open browsers.2. Close/disable all anti virus and anti malware programs so they do not interfere with the running of ComboFix.3. Do not install any other programs until this if fixed.How to : Disable Anti-virus and Firewall...http://www.bleepingcomputer.com/forums/topic114351.htmlDouble click on ComboFix.exe & follow the prompts. When finished, it will produce a report for you. Please post the C:\ComboFix.txt Note:Do not mouse click ComboFix's window while it's running. That may cause it to stallNote: If you have difficulty properly disabling your protective programs, refer to this link --> http://www.bleepingcomputer.com/forums/topic114351.htmlNote: If after running ComboFix you get this error message "Illegal operation attempted on a registry key that has been marked for deletion." when attempting to run a program all you need to do is restart the computer to reset the registry.===Please download Farbar Service Scanner and run it on the computer with the issue.Make sure the following options are checked:
Internet ServicesWindows FirewallSystem RestoreSecurity Center/Action centerWindows UpdateWindows DefenderPress "Scan".It will create a log (FSS.txt) in the same directory the tool is run.Please copy and paste the log to your reply.Please post the logs for my review.

http://www.bleepingcomputer.com/forums/t/478950/system-restore-error-windows-firewall-error-and-a-bunch-of-viruses/
Relevancy 29.24%

hi. brand new to this forum, sorry-please bear with me.

i just had an email "virus" go thru my entire address book-it appeared as if it was sent from my gmail account.
now i get the error code for hotmail (am assuming it is because of the overload sent...?).

any suggestions on how to get my hotmail fixed and running again?

THANKS A LOT!

http://www.vistax64.com/browsers-mail/299412-windows-live-mail-error-0x8de00006-server-error-4202-a.html
Relevancy 29.24%

Symptoms When you try to view any one of the following dialog boxes the dialog box may appear to be empty or partly empty Search Companion User Accounts Windows Update An Application Player Internal Error Occurred - Error Windows To Media How Has Fix Help and Support System Restore When you try to start Microsoft Windows Media How To Fix Windows Media Player Error - An Internal Application Error Has Occurred Player you may receive an quot How To Fix Windows Media Player Error - An Internal Application Error Has Occurred An internal application error has occurred quot or a similar error message Internet Explorer may not be able to print When you click File and then click Print the Print dialog box does not appear The print preview is blank Cause This issue may occur if one or more of the Jscript registry key settings are incorrect This behavior may also occur if the Jscript dll file is missing or damaged Method Reregister Jscript dll and Vbscript dll Click Start and then click Run In the Open box type regsvr jscript dll and then click OK Click OK Click Start and then click Run In the Open box type regsvr vbscript dll and then click OK Click OK If either of the files do not register as expected or if you receive an error message the system file may be missing or damaged To extract the missing file in Microsoft Windows XP follow these steps Click Start and then click Run In the Open box type msconfig and then click OK Click Expand File In the File to restore box type the name of the file that you want to restore In the Restore from box type the path of the Windows XP cab file where you want to restore the file or click Browse From to locate the Windows XP cab file Note The Windows XP cab files are stored in the I folder on the Windows XP CD In the Save file in box type the path where you want to extract the new file or click Browse To to locate the folder that you want Click Expand In the System Configuration Utility dialog box click OK If you are prompted to restart the computer click Restart Open a dialog box that previously experienced the issue that is described in the quot Symptoms quot section of this article If the issue recurs go to the next method Method Edit the registryWarning If you use Registry Editor incorrectly you may cause serious problems that may require you to reinstall your operating system Microsoft cannot guarantee that you can solve problems that result from using Registry Editor incorrectly Use Registry Editor at your own risk Click Start and then click Run In the Open box type regedit and then click OK Locate the following registry key HKEY LOCAL MACHINE SOFTWARE CLASSES CLSID f c - ac - cf-b d - aa bbbb InprocServer The Default value data should contain the following value C WINDOWS SYSTEM JSCRIPT DLL If it does not double-click Default type C WINDOWS SYSTEM JSCRIPT DLL in the Value data box and then click OK The ThreadingModel value data should contain the following value Both If it does not double-click ThreadingModel and then type Both in the Value data box Locate the following registry key HKEY LOCAL MACHINE SOFTWARE CLASSES CLSID f c - ac - cf-b d - aa bbbb InprocServer Repeat steps and to edit this key and then go to step Locate the following registry key HKEY LOCAL MACHINE SOFTWARE CLASSES CLSID f c - ac - cf-b d - aa bbbb InprocServer Repeat steps and to edit this key and then go to step Exit Registry Editor Taken from Microsoft knowledge base article http support microsoft com kbid

A:How To Fix Windows Media Player Error - An Internal Application Error Has Occurred

i've tried both methods but nothing seems to work. i can't even uninstall the application or reinstall it.
please help if there is another method. thanks.

http://www.bleepingcomputer.com/forums/t/54694/how-to-fix-windows-media-player-error-an-internal-application-error-has-occurred/
Relevancy 29.24%

Hello again I continue to have problems requiring some assistance I am running windows Home SP and I use windows live mail email client to service my email accounts with bellsouth net att yahoo com Over the past year I have been having spells when My ability to send or receive email would result in an error message x CCC stating my password is incorrect I know it is correct because I use it to access my web mail when Live Mail quits These spells of broken email willl generally correct themselves on their on however this most receent episode has lasted about two weeks and it's geting a little annoying now My attempts to consult ATT by chat for assistance always ends in their throwing up their hands in defeat and a closing statement live mail/server error windows error email 0x800CCC90 that the problem is my email client and not ATT and ATt support does not include Windows live mail My mose email error windows live mail/server error 0x800CCC90 recent chat sesssion ended with the silent treatment from the chator leaving the chatee hanging I know the problem is a server problem because my attempt to change my email password resulted in a statement quot There are currently no available options for you to obtain a temporary password for your account For help retrieving or resetting your password please contact us quot I appreciate your patience with my email error windows live mail/server error 0x800CCC90 rather verbose complaint Any assistance will be greatly appeciated xgdude

A:email error windows live mail/server error 0x800CCC90

  
Quote: Originally Posted by xgdude


Hello again. I continue to have problems requiring some assistance. I am running windows 7 Home, SP1, and I use windows live mail email client to service my email accounts with bellsouth.net (att.yahoo.com).
Over the past year I have been having spells when My ability to send or receive email would result in an error message 0x800CCC90 stating my password is incorrect. I know it is correct because I use it to access my web mail when Live Mail quits. These spells of broken email willl generally correct themselves on their on; however this most receent episode has lasted about two weeks and it's geting a little annoying now. My attempts to consult ATT by chat for assistance always ends in their throwing up their hands in defeat and a closing statement that the problem is my email client and not ATT and ATt support does not include Windows live mail. My mose recent chat sesssion ended with the silent treatment from the chator leaving the chatee hanging.

I know the problem is a server problem because my attempt to change my email password resulted in a statement: "There are currently no available options for you to obtain a temporary password for your account. For help retrieving or resetting your password, please contact us."

I appreciate your patience with my rather verbose complaint. Any assistance will be greatly appeciated.

xgdude


Try using Micorsoft's new "Outlook.com" as a solution. When you upgrade to Outlook.com, you can keep your @Hotmail address or you can get an @Outlook.com address to use along with your @Hotmail address. Once you decide which option is right for you, it only takes a few minutes to set up your new address.
See the following link for more information;
Outlook compare to hotmail - Microsoft Outlook
HTH

http://www.sevenforums.com/browsers-mail/274396-email-error-windows-live-mail-server-error-0x800ccc90.html
Relevancy 29.24%

Hey guys Quick summary the installation of Norton SystemWorks froze on my comp when i was instaling it so i cancelled (Boot failed error of Error) Loading after Windows install SystemWorks it and pretty much forgot about it When i rebooted a few days later Windows wouldnt load I did some reading correct me if i'm wrong and i found out it was becasue of Norton GoBack i didnt even want it on my system in Windows Loading error after failed install of SystemWorks (Boot Error) teh first place Windows Loading error after failed install of SystemWorks (Boot Error) It alters your boot files and i'm guessing when it froze it was in the prosses of changing those files So far i've tried everthing I could and had Windows Loading error after failed install of SystemWorks (Boot Error) no luck fixing it I tried the NOrton fix A file that unInstalles go back from dos but it didnt work since the installation was not complete in the first place I tried plugging it onto another system as a Slave but it doesnt even show up Heres the big problem i ran into I cant seem to get in teh partitions on my HD View or enter there were of them on this HD Is there any proggy you guys would recomend to get into NSFT partitions from dos Also I tired this a prog off of bootdisk com called xpquik it's suppose to be for reseting boot records for boot errors and it came back with a missing file called hal dll I wanted to copy that file back into the dir but i cant seem to get into drive C SO If you guys know how i could get into the C partition and copy hal dll file from a floppy or RE-fresh the XP install i have with out formatting the C drive or if there is no other way format JUST the C drive and do a clean install Or if you know any other way or anyhting else i could try It's a big gig HD and theres stuff on it that I really need for school so I would really really prefer not formating the whole thing If anyhting is unclear pls let me know and i'll try to explain better if I can Thx for your time and help in advance D

A:Windows Loading error after failed install of SystemWorks (Boot Error)

http://www.michaelstevenstech.com/XPrepairinstall.htm

You should probably start off with the simple method of booting to the recovery console (see the above for instructions to enter the recovery console) and running the commands fixboot and fixmbr.
http://www.michaelstevenstech.com/r_c_cmds.htm

http://www.techsupportforum.com/forums/f10/windows-loading-error-after-failed-install-of-systemworks-boot-error-80947.html
Relevancy 29.24%

e:\$Mft windows -delayed write failed

error:disk read error - read fails, the system cannot find the file specified.
================
these are the error messages that come up when I run my external hdd. What is the possibility that it is caused by a virus called minesweeper. My anti virus can not detect it. Please help.

A:e:\$Mft windows -delayed write failed . error:disk read error

anyone please ?

http://www.techsupportforum.com/forums/f10/e-mft-windows-delayed-write-failed-error-disk-read-error-349872.html
Relevancy 29.24%

Hiya this problem started when I encountered quot generic host process for win services has encountered a problem and needs to close quot I figured I could have a virus or something so I rebooted to run generic BSOD error|safemode update host error|windows some scans in safe mode Problem is when I attempted to go into safe mode it flashed the blue screen and reset Also this happens when I try and disable auto reset on BSOD so I just don t change it quot -System control panel applet- if the page file on volume C has an initial size of less then megabytes then the system may not be able to create a debugging information file if a STOP error occurs Continue anyways quot After the reset I was given options I haven t seen before quot Windows generic host error|windows update error|safemode BSOD XP professional quot - gt everything starts normally and quot Windows default quot - gt gives me generic host error|windows update error|safemode BSOD a quot hal dll is corrupted quot error I did my scans on normal windows since safemode is giving me BSOD and I didn t find any viruses mal spyware I used these for scanning Microsoft security essentials malwarebytes and spybot After some google searches I tried to update windows via www indowsupdate com but recieved an error message like I didn t have the internet I read somewhere to add it to the quot trusted websites quot and I did but didn t change anything Also from the searches I was redirected a few times so I think I have the google redirect virus Whenever I have this url spelt correctly I recieve a quot cannot access remote server quot error on posting previewing thread Help please nbsp

Relevancy 29.24%

I was given an HP Compaq Presario C that was headed for the Update 80070017 Error Windows unknown an encountered / error code garbage because it would not connect to the internet After running several scans ESET online scanner came up clean Installed Microsoft Security Essentials and installed SP and can't get it to install SP I keep getting error code Windows Update encountered an unknown error I would prefer to reformat but Recovery Manager restarts back into Windows and I Error code 80070017 / Windows Update encountered an unknown error have no disks Can provide a long list of what has been done if needed including WU Modules Normal Mode and WU Components fixes Permissions point in every which way but the correct way Any help would be much appreciated Free space is presently GB of GB on C Drive started out with GB's free space and GB free of GB on Presario RP D Specs as follows Vista Home Basic Intel Error code 80070017 / Windows Update encountered an unknown error R Celeron R MCPU GHz GHz MB RAM -bit OS Denied access to the CBS folder itself though can access CheckSUR log which I am including Error code 80070017 / Windows Update encountered an unknown error along with sfcdetails Checking System Update Readiness Binary Version Package Version - - Checking Deployment Packages Checking Package Manifests and catalogs Checking package watchlist Checking component watchlist Checking packages Checking component store Summary Seconds executed No errors detected Checking System Update Readiness Binary Version Package Version - - Checking Windows Servicing Packages Checking Package Manifests and Catalogs Checking Package Watchlist Checking Component Watchlist Checking Packages Checking Component Store f CSI ReadFile Failed x winsxs x microsoft-windows-servicingstack bf ad e none f cca f wcp dll x microsoft-windows-servicingstack bf ad e none f cca f f CSI Payload File Corrupt x wcp dll x microsoft-windows-servicingstack bf ad e none f cca f Summary Seconds executed Found errors CSI ReadFile Failed Total count CSI Payload File Corrupt Total count Checking System Update Readiness Binary Version Package Version - - Checking Deployment Packages Checking Package Manifests and catalogs Checking package watchlist Checking component watchlist Checking packages Checking component store Summary Seconds executed No errors detected Checking System Update Readiness Binary Version Package Version - - Checking Windows Servicing Packages Checking Package Manifests and Catalogs Checking Package Watchlist Checking Component Watchlist Checking Packages Checking Component Store f CSI ReadFile Failed x winsxs x microsoft-windows-servicingstack bf ad e none f cca f wcp dll x microsoft-windows-servicingstack bf ad e none f cca f f CSI Payload File Corrupt x wcp dll x microsoft-windows-servicingstack bf ad e none f cca f Summary Seconds executed Found errors CSI ReadFile Failed Total count CSI Payload File Corrupt Total count - - Info CSI SR Verifying x components - - Info CSI SR Beginning Verify and Repair transaction - - Info CSI SR Verify complete - - Info CSI a SR Verifying x components - - Info CSI b SR Beginning Verify and Repair transaction - - Info CSI d SR Verify complete - - Info CSI e SR Verifying x components - - Info CSI f SR Beginning Verify and Repair transaction - - Info CSI SR Verify complete - - Info CSI SR Verifying x components - - Info CSI SR Beginning Verify and Repair transaction - - Info CSI SR Verify complete - - Info CSI SR Verifying x components - - Info CSI SR Beginning Verify and Repair transaction - - Info CSI SR Verify complete - - Info CSI a SR Verifying x components - - Info CSI b SR Beginning Verify and Repair transaction - - Info CSI d SR Verify complete - - Info CSI e SR Verifying x components - - Info CSI f SR Beginning Verify and Repair transaction - - Info CSI SR Verify complete - - Info CSI SR Verifying x components - - Info CSI SR Beginning Verify and Repair transaction - - Info CSI SR Verify complete - - Info CSI S... Read more

A:Error code 80070017 / Windows Update encountered an unknown error

Checking Component Store
(f) CSI ReadFile Failed 0x00000017 winsxs\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6000.16386_none_07289f4cca5f6990\wcp.dll x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6000.16386_none_07289f4cca5f6990
(f) CSI Payload File Corrupt 0x00000000 wcp.dll x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6000.16386_none_07289f4cca5f6990



You have corrupted C:\Windows\WinSxS\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6000.16386_none_07289f4cca5f699
folder thus this issue with updates ,I'm not fully sure it's only issue with wcp.dll or with full folder.For precaution I recommend replace all files in this folder.

How to fix:

1.First prepare special recovery disk Create a Recovery Disc
and make sure boot order in your BIOS is CD-ROM,C,A
(if you don't know how to to do that then check your computer manual)

2.Download attached to post FixPacks.zip file -in zip file is packed Packs folder -you have to unpack it and place directly on C: exactly as I show below:

Click this bar to view the full image.
3.Boot burned special recovery disk (if you don't have Vista DVD instead use special recovery disk )
Choose language>>Repair Computer>>WinRE>>command prompt

and type:

robocopy C:\Packs C:\ /E /IS

press ENTER

del C:\Windows\Logs\CBS\*.*

press ENTER

4.Back to your system and run Readiness Tool again.
5.Try install SP2 from Microsoft Download Center Download details: Windows Server 2008 Service Pack 2 and Windows Vista Service Pack 2 - ALL Language Standalone (KB948465)

(not from Windows Update)

---------------------------------------------------------------------------------
WARNING
If my commands return any error then probably you have OS not on first parttion and you have to change drive letter in my commands,in this case you have to check parttions status in diskmgmt.msc (not in explorer).Please let me know if something goes wrong.
----------------------------------------------------------------------------------

http://www.vistax64.com/windows-updates/283889-error-code-80070017-windows-update-encountered-unknown-error.html
Relevancy 29.24%

Hello there I m currently running Vista on my loading Error start-up: message Error after C:/Windows/TEMP/msxm192z.dll Compaq laptop Unfortunately long story my key for Avast Antivirus expired in January and I was unable to input the key code until September so I guess the virus found it s way onto my computer Error message after start-up: Error loading C:/Windows/TEMP/msxm192z.dll during that time I ran a scan after finaly inputting the key and Avast found several Error message after start-up: Error loading C:/Windows/TEMP/msxm192z.dll infected items Some could be removed but since that scan I ve been getting the following message after starting-up the laptop - Error loading C Windows TEMP msxm z dll Also since the initial scan and appearance of this error message I ve been having various problems - Laptop running slow Media player not running won t open run - cannot play any music Photo Gallery icon blank and won t open - cannot access my photos I ve since uninstalled Avast and installed a free version of AVG Neither seem to be able to get rid of this virus I also followed the advice given to another member of this forum I downloaded Malwarebytes Anti-Malware This is the MBAM report from the scan which picked up several infected items - Malwarebytes Anti-Malware Database version Windows Service Pack mbam-log- - - - - txt Scan type Quick Scan Objects scanned Time elapsed minute s second s Memory Processes Infected Memory Modules Infected Registry Keys Infected Registry Values Infected Registry Data Items Infected Folders Infected Files Infected Memory Processes Infected No malicious items detected Memory Modules Infected No malicious items detected Registry Keys Infected HKEY CURRENT USER SOFTWARE Microsoft Windows CurrentVersion Ext Stats d db d - ec - a -bd - e e bb Adware MyWebSearch - gt Quarantined and deleted successfully HKEY LOCAL MACHINE SOFTWARE Microsoft Windows NT CurrentVersion Image File Execution Options regedit Exe Trojan Agent - gt Quarantined and deleted successfully Registry Values Infected HKEY LOCAL MACHINE SOFTWARE Microsoft WBEM uid Malware Trace - gt Quarantined and deleted successfully HKEY LOCAL MACHINE SOFTWARE Microsoft WBEM UpdateNew Malware Trace - gt Quarantined and deleted successfully Registry Data Items Infected No malicious items detected Folders Infected No malicious items detected Files Infected C WINDOWS Temp VRTD tmp Malware Tool - gt Quarantined and deleted successfully C WINDOWS Temp VRTF tmp Backdoor Bot - gt Quarantined and deleted successfully C Users owner AppData Local Temp hi bat Malware Trace - gt Quarantined and deleted successfully However I got a message saying the OLT program was infected so I did not download it Even after successful removal and restart of my laptop using Malwarebytes I STILL got the same error message and my photos are still inaccessible Please can anyone help me This virus appears to be spreading to different apps in my laptop and I cannot seem to get rid of it through any anti-virus programs nbsp

https://forums.techguy.org/threads/error-message-after-start-up-error-loading-c-windows-temp-msxm192z-dll.881279/
Relevancy 29.24%

Hi about two months ago my computer started doing some weird stuff where multiple programs didn t work Some programs such as notepad give an error of C Windows systems WINSPOOL DRV is either not designed to run on Windows or it contains an error I have no idea what is causing this and found out when looking at its permissions all were switched to + error to error unable Windows bakcup create + update winspool.drv a TrustedInstaller while I had winspool.drv error + Windows update error + unable to create bakcup only read execute winspool.drv error + Windows update error + unable to create bakcup perms Also when I tried to restore my computer to an earlier version all of my restore points were gone When I tried to backup my files an error came up stating quot Server execution failed x quot Lastly I am unable to set my computer to update windows When I go to the action center and click Install Updates Automatically the window closes and nothing changes My current OS is Windows which was upgraded from Windows Vista and it is an HP laptop Also any automatic updates HP software usually installs doesn t seem to be working I have no idea why all of this is happening and I greatly appreciate any help nbsp

https://forums.techguy.org/threads/winspool-drv-error-windows-update-error-unable-to-create-bakcup.932212/
Relevancy 29.24%

I have been getting error x f whenever I attempted to install the windows 0x8007001f bu caused can update soft Windows error 10 link. - be error anniversary Windows 10 update error 0x8007001f - error can be caused bu soft link. update I went through most post suggestions for fixing this error What I found I have not seen posted before I have one of those Dells XPS similar to Alienware which has the system on a SSD and a second conventional HHD for data This configuration if unchanged still places user data such as Documents on the smaller SSD In order to have all user data put on the larger HHD I defined a soft symbolic link from Windows 10 update error 0x8007001f - error can be caused bu soft link. the SSD to the HHD for the Users directory This worked great until my computer attempted to install the anniversary update of windows I kept getting the x f error no matter what I tried That is until I restored the original Users directory on the SSD After that the update went through just fine After the update I relinked the Users directory and everything came up as before but with the windows update installed If you have linked the users directory as I did just unlink see below and the update should go through Notes The mklink command is used to define the symbolic link It should be run from an administrator command prompt mklink d Users D Users Rename the original Users directory on C before defining the link If you did not then you will have to copy the Users directory from D to C after deleting the link then delete and relink after the windows update To delete the link just do an quot rmdir Users quot from administrator command prompt while in directory C As far as I'm concerned this lack of ability to use a symbolic link is a bug in the windows installer I wouldn't hold my breath until it is fixed though The anniversary update is the only one which seems to choke on a symbolic link Other updates before it went through ok

http://forums.windowscentral.com/windows-10/443289-windows-10-update-error-0x8007001f-error-can-caused-bu-soft-link.html
Relevancy 29.24%

Help I need assistance solving this problem.

When installing Windows 2000 setup copies the initial files to the hard drive and then restarts to begin the 1st stage of setup.

The system begins the startup process by "Loading the Windows Executive" At this point setup stalls and gives the following message:
"Setup cannot load ntkrnlmp.exe the error code is 16"
This error is duplicated in different releases in win2k from the beta 3 to the final releases.

Please assist, respond to [email protected] or ICQ 1937432
 

https://forums.techguy.org/threads/windows-2000-setup-error-loading-ntkrnlmp-exe-error-code-16.28303/
Relevancy 29.24%

Mod Edit Moved from Win to the Am I Infected forum boopmeI randomly decided to look at McAfee and check my settings etc When looking at the main screen everything states its on and green I had the most current definitions loaded When I checked my McAfee firewall it stated on When I clicked to go into the McAfee firewall the screen then changed and said it was off When clicking the Turn On button start and Windows Error Firewall 0x8007042c Code Error - not 1068 Can it would immediately shut off I searched this issue and the blogs stated to look at the Windows Firewall under Services When I checked it was not there I did a Windows Search for it and found it When it opens it gives tells me I Can not start Windows Firewall - Error Code 0x8007042c and Error 1068 need to Update the Firewall Settings When I click on Use Recommended Settings it gives me an error Windows Firewall can't change some of your settings Error Code x c I've checked out some of the blog discussions and followed a few thread Can not start Windows Firewall - Error Code 0x8007042c and Error 1068 about creating new register bat files and running them I've also tried merging some dll files also per the bloggers After doing these actions the Windows Firewall now appears in my Services but when I click to start it I get the error Windows could not start the Windows Firewall Service on Local Computer Error The dependency service or group failed to start

A:Can not start Windows Firewall - Error Code 0x8007042c and Error 1068

McAfee has verified I have a virus.  Will post in the Virus Forum.

http://www.bleepingcomputer.com/forums/t/498566/can-not-start-windows-firewall-error-code-0x8007042c-and-error-1068/
Relevancy 29.24%

Hi All

Some of our client machine(Windows7) is not taking update from WSUS server. When we verified the WindowsUpdate logs, we could see that WU client version is changed to 7.6.7600.256 from 7.5.7601.17514.Our WSUS server is running with version WSUS 3.0 SP1 on windows 2003 server. So we suspect this may be the reason windows 7 machines is getting the error message 'Windows Update Client failed to detect with error 0x800b0001' when it try to get the update from WSUS server.

So please suggest any steps to change the WU client version on windows 7 back to 7.5.7601.17514

Please find the attached log file.

A:Getting the error Windows Update Client failed to detect with error 0x800b0001

Hi this is about your error Error code when you try to use Windows Update or Microsoft Update to install updates: "0x800B0001"

http://www.techsupportforum.com/forums/f217/getting-the-error-windows-update-client-failed-to-detect-with-error-0x800b0001-658345.html
Relevancy 29.24%

Hi I have been having some recurring problems with the attempts to install some automatic windows updates Security Update for Microsoft Office Acess Security Update for Microsoft Office Outlook Junk Email Filter I am not able to install these updates maybe any other updates in general After attempting the install the following install window says quot Windows Update encountered an unknown Code 80070643, Windows error, Update 7 install Error can't updates. error quot Next to it an error code Microsoft Error Code 80070643, Windows 7 Update error, can't install updates. provides a solution to the problem by re-installing Microsoft NET Framework They also provide a link to the program NET Framework cleanup Error Code 80070643, Windows 7 Update error, can't install updates. tool that enables you to uninstall NET Framework and it s components I followed Microsoft s instructions to solve Error Code 80070643, Windows 7 Update error, can't install updates. the issue though I ve been put at a standstill I have used the NET Framework Cleanup tool to uninstall NET Framework and it s components states that it uninstalls all versions SP Then afterwards instructed to reinstall NET Framework specifically in an order then then SP I start with then as the installation starts it says that to contiunue installation I must turn off or on windows features in the Control Panel I do so and turn off all Windows features Then continue and it again states to turn off features in the Control Panel I wasn t able to continue the process and I am also concerned that this is the same error that made me unable to install Microsoft Security Essentials as this is the same error and I am sure that something is wrong with my version of NET Framework Please help me resolve this issue it s been pissing me off nbsp

A:Error Code 80070643, Windows 7 Update error, can't install updates.

Hello?
Waiting for a day no one seems to be replying.
 

https://forums.techguy.org/threads/error-code-80070643-windows-7-update-error-cant-install-updates.939844/
Relevancy 29.24%

Hello everyone I recently had a virus on my Windows xp computer one of those ones that pretends to be an anti-virus program telling you your computer is infected Before I had the chance to remove it I error message xp my laptop, windows have Error" says: start I I "lsass.exe - that an cannot Application found I I cannot start my windows xp laptop, I have an error message that says: "lsass.exe - Application Error" was unable to start up my computer Instead of the usual user login screen I had a black screen with this message quot lsass exe - Application Error quot The application failed to initialize properly xc Click on ok to terminate the application Once I click okay nothing happens the screen just remains blank I have tried going into safe mode F key but it doesn t seem to work I hold the button down but the computer just loads up like normal and goes onto the dreaded black screen I have done some quick research and found that the problem is either the OS is broken or a virus is pretending the OS is broken Either way I have no idea what to do Any help is much appreciated Please note however I am pretty clueless when it comes to computers thus please try to assume as little prior knowledge as is reasonably possible and include simple step by step instructions if you can I apologise for my ignorance If you need any further information let me know Note as I have no laptop currently I will have to wait until I am in work to respond Thanks in advance

A:I cannot start my windows xp laptop, I have an error message that says: "lsass.exe - Application Error"

Hi gringo_jesus, and welcome to BleepingComputer.

Please post the make and model of this computer.

http://www.bleepingcomputer.com/forums/t/356224/i-cannot-start-my-windows-xp-laptop-i-have-an-error-message-that-says-lsassexe-application-error/
Relevancy 29.24%

I have been having problems installing 8 updates since early May 2012. I am getting the error code in the title line.

The updates are:

[LIST][*]Security Update for Microsoft Office 2007 suites (KB2596672)[*]Security Update for Microsoft Office 2007 suites (KB2596792)[*]Security Update for Microsoft Office 2007 suites (KB2596880)[*]Security Update for Microsoft Office 2007 suites (KB2597162)[*]Security Update for Microsoft Office 2007 suites (KB2597969)[*]Security Update for Microsoft Office Excel 2007 (KB2597161)[*]Security Update for Microsoft Office Word 2007 (KB2596917)[*]Update for Microsoft Office Outlook 2007 Junk Email Filter (KB2687267)

I have run FixIt, but to no avail. I have also turned off services and rebooted and ran Windows Update and still got this error.

Do I need to just skip these updates, or somehow troubleshoot this and fix it. If I need to fix it, I need help.

Regards, and thanks.

http://www.vistax64.com/windows-updates/296706-error-code-80070658-windows-update-encountered-unknown-error.html
Relevancy 29.24%

Hi, I have looked at all the different discussion threads and tried almost every single suggestion made but still have'nt had any luck so far.
I can receive email but can't send any. What triggered this error is that, I recently moved from London to New York and I am now using a different ISP to connect to the internet. But my old setting should work (since it has worked in the past when I logged in from hotel or other locations using different ISPs.)

I have tried changing the port numbers etc, but I keep getting back this error message.

"The connection to the server has failed. Subject 'Test', Account: 'O2 Email', Server: 'smtp.o2.co.uk', Protocol: SMTP, Port: 25, Secure(SSL): No, Socket Error: 10060, Error Number: 0x800CCC0E"

Any help will be much appreciated.

Thanks

A:Send problem with Windows Mail. Socket Error: 10060, Error Number: 0x800CCC0E

You must go to the website of the new email provider to get the correct settings. Not just port numbers but all other settings as well.

http://www.vistax64.com/browsers-mail/282028-send-problem-windows-mail-socket-error-10060-error-number-0x800ccc0e.html
Relevancy 29.24%

How can I resolve this common problem I have... unknown error during install of Windows Service Pack SP1 update ? I had to restore my older notebook to factory status and now this important update won't complete the install due to this error code. I also
can't update Internet Explorer browser from version 8. Can somebodey help me with these issues?

https://social.technet.microsoft.com/Forums/en-US/44aadb0a-b97e-43fd-a4b4-a29b06fc6b46/how-to-resolve-error-0x80070570-unknown-error-during-install-of-windows-service-pack-sp1-update-?forum=w7itprogeneral
Relevancy 29.24%

I have a Sitefinity project I am developing that has been dashboard Update System.Web.HttpCompileException - Windows accessing KB3098779 500 Error - Error Sitefinity following working fine until a few weeks ago After a round of Windows updates I would get a error everytime I tried to access the Dashboard or any Error following Windows Update KB3098779 - 500 Error accessing Sitefinity dashboard - System.Web.HttpCompileException other backend page The login worked but the desired page always failed whether running in VS or published and run from IIS The production site hosted on WS R remained trouble free but the issues affects development on my Windows box I confirmed the error was caused by Security Update for Microsoft NET Framework and on Windows and Windows Server R x -based Systems KB Removing the update resolved the issue Once a week every week since the Error following Windows Update KB3098779 - 500 Error accessing Sitefinity dashboard - System.Web.HttpCompileException update is reinstalled automatically without me being able to stop it The error Error following Windows Update KB3098779 - 500 Error accessing Sitefinity dashboard - System.Web.HttpCompileException reappears every time this update is automatically reinstalled Log file details Message HandlingInstanceID fbe e - - -bbec-cfc d c An exception of type 'System Web HttpCompileException' occurred and was caught ------------------------------------------------------------------------------- Type System Web HttpCompileException System Web Version Culture neutral PublicKeyToken b f f f d a a Message External component has thrown an exception Source System Web Help link Results System CodeDom Compiler CompilerResults SourceCode WebEventCode ErrorCode - Data System Collections ListDictionaryInternal TargetSite System CodeDom Compiler CompilerResults Compile HResult - Stack Trace nbsp nbsp nbsp at System Web Compilation AssemblyBuilder Compile nbsp nbsp at System Web Compilation BuildProvidersCompiler PerformBuild nbsp nbsp at System Web Compilation BuildManager CompileWebFile VirtualPath virtualPath nbsp nbsp at System Web Compilation BuildManager GetVPathBuildResultInternal VirtualPath virtualPath Boolean noBuild Boolean allowCrossApp Boolean allowBuildInPrecompile Boolean throwIfNotFound Boolean ensureIsUpToDate nbsp nbsp at System Web Compilation BuildManager GetVPathBuildResultWithNoAssert HttpContext context VirtualPath virtualPath Boolean noBuild Boolean allowCrossApp Boolean allowBuildInPrecompile Boolean throwIfNotFound Boolean ensureIsUpToDate nbsp nbsp at System Web Compilation BuildManager GetVirtualPathObjectFactory VirtualPath virtualPath HttpContext context Boolean allowCrossApp Boolean throwIfNotFound nbsp nbsp at System Web Compilation BuildManager CreateInstanceFromVirtualPath VirtualPath virtualPath Type requiredBaseType HttpContext context Boolean allowCrossApp nbsp nbsp at Telerik Sitefinity Web UI ControlUtilities CompileControl String virtualPath nbsp nbsp at Telerik Sitefinity Web UI ControlUtilities LoadControl String virtualPath Page page nbsp nbsp at Telerik Sitefinity Web UI VirtualPathTemplate InstantiateIn Control container PlaceHoldersCollection placeHolders nbsp nbsp at Telerik Sitefinity Web UI SimpleView CreateContainer ITemplate template nbsp nbsp at Telerik Sitefinity Web UI SimpleView get Container nbsp nbsp at Telerik Sitefinity Web UI SimpleView CreateChildControls nbsp nbsp at System Web UI Control EnsureChildControls nbsp nbsp at System Web UI Control PreRenderRecursiveInternal nbsp nbsp at System Web UI Control PreRenderRecursiveInternal nbsp nbsp at System Web UI Control PreRenderRecursiveInternal nbsp nbsp at System Web UI Control PreRenderRecursiveInternal nbsp nbsp at System Web UI Control PreRenderRecursiveInternal nbsp nbsp at System Web UI Control PreRenderRecursiveInternal nbsp nbsp at System Web UI Control PreRenderRecursiveInternal nbsp nbsp at System Web UI Page ProcessRequestMain Boolean includeStagesBeforeAsyncPoint ... Read more

https://social.technet.microsoft.com/Forums/en-US/f23f2cc0-9e93-4170-ba2b-9659c5ad1511/error-following-windows-update-kb3098779-500-error-accessing-sitefinity-dashboard-?forum=w8itprogeneral
Relevancy 28.81%

Hello guys,
I have tried everything I found online and failed. I don't wanna do a clean install. I have attached the CheckSur.log. Please help.

A:Windows update error 80070002 and System restore error (Both)

I was getting that same error - and saying "cannot search for updates".

I tried the Fixit tool and command prompts - suggested by Microsoft - nothing worked.

I finally called Microsoft - 1 - 800 - Microsoft and they did a remote on my comp and the problem is solved, at least for now.

There is no charge for this service.

As for System Restore, make sure you have set a Restore Point.
Go to Start and type system restore.
Go to " Create a restore point".

See if your C drive says "on" and if not click Configure.

http://www.sevenforums.com/windows-updates-activation/309131-windows-update-error-80070002-system-restore-error-both.html
Relevancy 28.81%

First of all, i would like to apologize if i ask in wrong place.

Hi guys... i would like to ask to you..
i want to install DXSDK jun 2010 in my Laptop run Windows 8.1 64 bit.
but, i found an error during installing it.

It says "error s1010".

Here is the SS :

http://www.eightforums.com/installation-setup/67647-error-installing-dxsdk-jun-2010-windows-8-1-error-s1010.html