Windows Support Forum

General Win7 memory leak and Unknown memory usage?

Q: General Win7 memory leak and Unknown memory usage?

So I've had this problem for a few months with my Unknown memory Win7 usage? leak and General memory thinkpad x win home premium bit I used ccleaner run memtest multiple times chkdsk multiple times sfc scan multiple times none that helped Sfc always detects errors but always cannot fix some of them I have mse avast and malwarebytes and scanned them with absolutely no results I've run rootkit scanners with no results Basically after a few hours the memory use rises up to out of my gb with absolutely no intensive processes running I'll attach rammap and processexplorer screenshots I know this is not quot normal quot behavior because once my ram goes over the system slows down to where General Win7 memory leak and Unknown memory usage? I can't end tasks open new programs even things like deleting a file take minutes Once it reaches or my screen starts flashing black kind of like if you blink fast I have to hard restart every time this General Win7 memory leak and Unknown memory usage? happens This is not normal I've had quot experts quot on other forums tell me its win using the ram to its greatest Its not As soon as I restart and open my usual programs browser steam openoffice winamp utorrent my ram is at around or percent If I leave the same programs open and just leave it on for hours the ram gets to and my screen starts flashing and I have to reboot If you look at the rammap and process explorer shots the most ram intensive programs are chrome and firefox but they only use mb each Everything else is only - mb and do not add up to the gb my computer uses after only a few hours The thing I noticed is that the quot page table quot is using gb of my ram don't know what it is though I tested my hdd using crystaldiskinfo and hdtune and found nothing Although I did replace the factor hdd with a larger gb one and imaged my previous hdd But I don't think this is the problem since I've had the new hdd for a year and the problems started in the last few months My ram is gb gb factory and gb corsair select I bought afterwards I tested my computer with memtest and manually rebooted with each stick and the same thing happened only faster because of the less ram it must be a software issue Ram Use Note both these show the screenshots when my computer was at like gb ram is unaccounted for Ram Use - Imgur

Relevancy 100%
Preferred Solution: General Win7 memory leak and Unknown memory usage?

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link (This link will automatically start a download of Reimage that you can save to your computer.)

A: General Win7 memory leak and Unknown memory usage?

Hi mesohamster welcome to SevenForums

First I recommend uninstalling Avast then we could go from there . Using Revo Uninstaller

Click on the app inside RevoUnistaller and choose uninstall
Click on Yes to agree you want to uninstall
If you get the builtin Uninstaller for the app use that and once you're done click Finish
Back inside RevoUninstaller click on Next
Let RevoUninstaller scan for left over registry keys . Click on Select All and choose Delete .
Once done click on Next.
Let the left over files and folders be locates then Click on Select All then click Delete then Next and you should be done .

Restart PC
Relevancy 39.13%

Intel and Micron held a joint press conference earlier today to announce a breakthrough memory technology called 3D Xpoint (pronounced 3D crosspoint) that's up to 1,000 times faster (read speeds) than today's NAND, features 1,000 times better endurance and is...

Read more

A:Intel and Micron announce 3D Xpoint, a new memory technology that's 1,000 times faster than NAND

I hope this really brings about the death of the hard drive. And it can't come soon enough.

Gimme a 1 TB Xpoint SSD that doesn't break the bank and I'm sold.
Relevancy 22.36%

SO close Help me get this ball across the goal line I have a old quot Microtek ScanMaker E quot scsi flatbed scanner that originally came with an ISA scsi interface to give you some idea of how old it is I connected it to my PC using a equally ancient Tekram F pci SCSI card c 64bit my got scanner Almost w/Win7 old working that I ve been using with bit WinXP Pro for years The scanner has an - quot x quot scanning bed dpi and bit color reproduction It works great and I see no reason to spend a few hundred dollars to replace it just for Win compatibility so I m trying to get it to work with the bit Almost got my old scanner working w/Win7 64bit version of Windows To complicate things the company that made my SCSI card Tekram went out of business years ago so the bit XP driver was the last they made But after MUCH Googling I found a bit Win compatible driver for another card using the same chipset and low amp behold Windows recognized it It then quot detected quot my scanner for the first time but didn t have a driver Again after much searching I found a Vista bit version of Microtek s quot ScanWizard quot scanner software with bit driver and now bit Windows detects my scanner Yeah But when I try to access the scanner I get an error telling me I quot must install Color Matching System first quot for the scanner to work I don t remember any such software being needed to use the scanner with XP and there is no such program in the ScanWizard software I just installed searching online suggests I will also need to run an quot ICC Color Profiler quot Anyone have any ideas So close yet so far I love doing things I was told were quot impossible quot Help nbsp

A:Almost got my old scanner working w/Win7 64bit

That Microtek ScanMaker E3 scsi flatbed scanner ... didn't even work well with Windows XP... and the cost in time and components to attempt to make it work are much higher than a decent Canon or Epson scanner which can be had fof $40... Less if used...

On what system are you runny SCSI ?
Relevancy 41.71%


Can someone give me an advice, I want to use the very high setting for GTA 5, but the video memory indicator indicates that I go overboard the 2GB of my GTX 750 TI, is that safe?.

BTW my resolution is 1366x768 only.
Relevancy 24.08%

Okay so my computer is manly for playing games but I ve been having a problem for quite some time that I & self it Bios GPU Usage Drops Changing & CPU can t seem to be able to fix During gameplay at some points totally randomly I start to have huge freezes both CPU and GPU usage drop insanely and following same do the fans this usually GPU & CPU Usage Drops & Bios Changing it self happens for or minutes sometimes even longer a simple relog from the game fixes it This also happens if let s say I go AFK from my game about minutes or so when I come back it s freezing ALOT I looked further into trying to fix this problem I tried almost everything until I had the idea to check my bios since I had previously overclocked my CPU not overclocked atm and surprise for me when I did a bios reset for default settings this is what I saw http postimg org image eoejxdyv That is changed by itself every boot And that is what is causing my GPU and CPU usage drops I have no idea why that is changing by itself at first I though it was AI Suite software from Asus that I had used before to overclock my CPU but even with that uninstalled it is happening I also thought about reinstalling my windows but I would rather wait GPU & CPU Usage Drops & Bios Changing it self for Windows to go public My Specs - Windows Pro - Bit - Evga Supernova Nex G Gold - Asus Z -Pro Socket - Intel Core i k ghz Ghz Turbo - Corsair Hydro H - Gigabyte Windforce R X GB GDDR - GB G Skill Ripjaw-X Mhz DDR Dual PS All drivers and software are always updated nbsp

A:GPU & CPU Usage Drops & Bios Changing it self

Have you tried changing the cmos battery? The bios will not hold settings if the battery is bad.
Relevancy 41.28%

My samsung 16GB memory card is not getting detected in my laptop.
Even if I connect through my phone data card it's not detected. But it is working properly in my phone. I have been using it for 2 years.

A:Memory card is not getting detected in laptop

MerissaWalker said:

Have you tried it on other computers?Click to expand...

yes, even then it is not getting detected
Relevancy 57.19%

Memtest and other memory test software don't tell you which of the modules is the faulty one. Is there any way to tell which is the bad stick besides testing one-by-one?

Thank you

A:Does any memory test tell you which of the memory sticks is bad?

Not really. but you can test each stick one by one
Relevancy 39.56%

Many in the PC gaming world are turning their attention to AMD's upcoming Radeon R9 300 series launch and specifically, the R9 390X. According to the latest scuttlebutt, this card will ship with two different SKUs - an air-cooled version...

Read more

A:AMD Radeon R9 390X variant will come water-cooled with High Bandwidth Memory

Having to resort to water cooling just to be on par with nvidia what a joke
amd with their hot running primitive brute force gpus
Relevancy 40.42%

Hi all,

My friend's USB flash memory has data (its drive shows that there is data in it) but when I double click on it to open it and see the contents, it doesn't show any folders and files! I did the following works:

1- I scanned it by my updated kaspersky AV. but no threat found
2- Scanned by windows defender tool. same result!
3- scanned by malwarebytes anti-malware. same.
4- cmd (run as administrator) -> go to its drive (e.g., H:, when H is my flash drive) and typing the attarib -s -h *.* /s /d command. It could not to show the data.

All my attempts faced failure till now.

Can anyone help me please?

A:USB flash memory has data but doesn't show the contents

Go to cmd (run as administrator) -> go to its drive (e.g. H: where H is my flash drive) and type the attrib -s -h *.* /s /d
Now flash will show the data.
Your attrib spelling was wrong correct them
Try it.
Relevancy 24.51%

Ive been having one BIG issue with my computer Ive researched alot and tried alot of things but nothing has worked I think that its the SVCHOST issue but I cant find a great usage CPU problem 100% site video on how to delete it Heres whats been happening also I keep my computer on all the time Its stays nice and cool so I dont need to turn it off 100% CPU usage problem I will a couple times a 100% CPU usage problem month or if im going somewhere it stays off till I get back But this has nothing to do with the problem I think Ok So I turn on my Computer after I restart it because of the CPU Insanely Slow PC I get on my usual sites Facebook NOAA Weather Youtube Mail Etc But it seems it doesnt matter what I do Watch netflix play minecraft or dont even have a browser or game open at all my CPU ALWAYS Spikes to and when it does it stays their And doesnt go away until I shut off my computer and re-start it When I try to install something or upload a video to youtube the hour turns into minutes of the CPU jumping to its like it knows what im trying to do and completely stops it by running CPU to so I cant do anything I dont want to pay for anything to get rid of it I would rather do it manually My CPU percentage Jumps in very high s From to to then to then to it just jumps everywhere at a very high speed Here is something even more messed up My Cpu will be showing those High percentages but when I go to Task manager and look at the processes running theirs only - that are running between - CPU Usage And when I play a game For example start up Flight Simulator it takes Cpu But it jumps from to back and fourth FSX is the ONLY game when after an hour runs just fine Any other game I play freezes Extensively The internet then stops doesnt load Applications start to not respond the only thing I can really get to is the Files of my computer and Task manager Regedit and Run Im running on Windows X Home Premium I have a Intel Pentium dual core E GHz Ive never had any problems with the CPU before And so far after trying to research and fix this problem for a couple days Im about to throw this out my window im so pissed I cant do nothing with lag Help nbsp

A:100% CPU usage problem

So what is the process with most CPU usage, in Task Manager? It's gotta be something.
Relevancy 59.34%

Hi to all at Techspot. I'm not a techie but noticed that there was two kinds of memory, DDR3 and DDR5. My Question is,
What's the difference between DDR3 Memory and the Graphics DDR5 Memory and if the DDR5 is in anyway better then why is it not used for desktop computer memory instead of DDR3.
I know some apps are taking advantage of or utilizing graphics memory Thanks for any explanation

A:What's the difference between DDR3 memory and GDDR5 memory?

As far as I know, memories used on video cards have different characteristics than memories used on PC.. since this is beyond my knowledge, I'm sorry I can't explain much more in details.. Just wait for other members with deeper knowledge that can give some information regarding of this matter
Relevancy 24.08%

Hi, Could anyone tell me any ideas on trying to get my usb device to work again. Not recognizing on my computer. Went into device managers and can see unknown device. I have tried uninstalled it and pluged it back in but all it says is successful installed unknown device. The computer doesnt even know what it is. Is it possible to try and install a driver for it and tell it that its a usb device?

Thank you

A:Sandisk Cruzer unknown device

Sometimes the drives just die. This shouldn't be a driver issue, do other flash drives work in the computer? Have you tried this drive in a different computer?

You could open up disk management and see if you can delete the partition and create a new one, or simply format the existing one as NTFS or exfat. WARNING: Doing this will cause you to lose any data you may have on the drive.
Relevancy 35.69%

For the past month, Nvidia has faced its fair share of bad PR thanks to the GeForce GTX 970's memory allocation issue. As has been uncovered by users and explained by Nvidia, the GTX 970's last 512 MB of VRAM...

Read more

A:Nvidia CEO says GTX 970 memory controversy "won't happen again"

Again: the performance didn't change overnight; it's today the same performance than the advertised on launch date. Even that technicality can kill the case. Specifications were the "misleading" part.
Relevancy 23.22%


Yesterday, I was working with my PC while my 1TB Seagate external hard ( was plugged in via USB. The USB connection was a little bit loose.

Then when I was plugging a USB flash memory in, I noticed that the external hard was disconnected.
I connected it again, but it didn't appear in My Computer.
Here is the state in Disk Management and Device Manager:

After that, I plugged out the "SATA to USB converter" from the hard and connected it directly to SATA cable inside the PC case (like internal HDD), but this time nothing showed up in Disk Management, Device Manager and BIOS. However, it took a long time for the system to boot.

I searched and read lots of threads and tested some other stuff:

(It didn't appear in Minitool Partion Wizad).

I've got a lot of data on this HDD which really matters to me.
Any help is really appreciated.

A:FreeAgent 1TB External Hard stopped working (unknown, not initialized)

Hi there Sedhadi,

If your HDD is failing the manufacturer's tests it is probably dead. IF you need to get your data back look for a reputable data recovery company in the area.
Hope that helps.
Relevancy 39.13%

Samsung has started mass producing what's being called the industry's first ePoP, or embedded package on package. By combining two key smartphone elements into a single package, Samsung's solution promises to offer high-end handset makers up to 40 percent more space. ...

Read more

A:Samsung's new mobile memory chip combines 3GB of RAM, 32GB of flash into a single package

It's the natural progression of tech right now.
Relevancy 42.14%

Hello all...I'm having problems with my Dell PC. I just purchased a sweet new scanner (ScanSnap SV600) and when I scan a lot of pages at once, I get an error message saying I'm out of storage and to restart the computer. The specific code given is 0x8007000E. I've also been noticing when I run a few web tabs at once, sometimes they just go black and I need to restart the browser. It has 8GB of RAM and all the drivers are updated. Anything I'm missing? Thank you kindly!

Dell Optiplex 790
[email protected]
Win 7 Pro

A:Memory Problems?

How much storage space do you have? From what I could research this error is tied to programs demanding a great deal of memory. You say this occurs when trying to scan a lot of pages at once. Does this occur when scanning less material at once? Have you tried updating your drivers for the scanner?
Relevancy 40.85%

1 4gb samsung pc3-12800 1.35 v
1 4gb nanya pc3-10600 1.5 v

The timings are listed different on the stick.
HWInfo reports that at 666.7 both are 9-9-9-24
Crucial will sell me all 1.35 v memory as upgrades and the 4830T-6678 Timeline X came with the [email protected]
The laptop boots and runs with both sticks installed

Any thoughts on this?


A:Mixing memory in Acer Aspire laptop

Is the laptop reporting 8GB of memory installed? If it is, you should be okay
Relevancy 22.36%

Hi all Apologies in advance for such a long post I headaches + installation = hardware New Win7 don t know if I just have a corrupt New hardware + Win7 installation = headaches Windows Ultimate installation or what but this all started three weeks ago or so after installing new hardware specifically New hardware + Win7 installation = headaches motherboard Asus A M-A New hardware + Win7 installation = headaches processor AMD A K and RAM Kingston HyperX GB DDR Since I had the extra RAM slot I also put in one of the Aeneon XTune GB DDR I have from before the upgrade The sticker on it says it s but it shows up in BIOS POST as Since then I ve had the following problems Internet Unable to establish any connection at all when using the ethernet cable plugged into my Cisco Linksys EA Router I can connect wirelessly but that connection is lousy and I m not sure why especially since the router is only about feet from the computer To be fair the lousy wireless connection is something I was dealing with since before the hardware upgrade Windows reinstall which is why I finally gave up and bought a ethernet cable the computer used to be in a different room though on the same floor of the house The problem with being unable to get any type of connection when plugged in started after reinstalling Windows and then doing something like updates and then moving the PC to the new spot I made a point of moving the tower myself just so that I could be sure nothing happened to it so I know there was no physical damage done because of dropping or otherwise banging it around at all I ve checked the ethernet cable that runs from the modem to the router as well as the one and neither of them appear to be damaged at all I ve also tried plugging the one into all of the ports on the back of the router in the event that one of them just bit the dust somehow but nothing changed Any thoughts on how I can either get my wired connection working again or what might be making the wireless connection so horrible For clarification on quot horrible quot I m not talking dial-up speeds but some sites either load slowly or not at all sites that load up just fine on every other device in the house - specifically cell phones and iPod an Xbox a Wii and a laptop My connection to Battle net for playing WoW Starcraft II Diablo III is also pretty lag-tastic My NIC is an onboard Realtek GR PCIe Gigabit LAN controller according to the motherboard manual In terms of anything that may be interfering with the wireless signal there s a metal support post and a metal I-beam a few feet from where the router currently sits though it was previously or so feet from both Other than being in close proximity to those the room is wide open I was told that water can interfere with a wireless signal and we do have a lot of ground water under around the house can anyone verify whether ground water can degrade the signal so much over such a relatively small space Hard drive partition issues Until the upgrade when the computer just wouldn t boot presumably because Windows couldn t handle dealing with such big hardware changes all at once I had Windows installed on a partition on a TB Western Digital drive Since I had to reinstall anyway I installed Windows to a partition on a smaller but faster TB Seagate drive Up until this afternoon when I installed Seagate Discwizard one of the partitions on the big drive was inaccessible showing up in disk management and a couple of rd-party hard drive utility partitioning programs as simply quot unallocated space quot Since this afternoon though that partition is now showing up as a completely separate hard drive in disk management AND as quot unallocated space quot on the drive it s actually a part of I m a little leery of just leaving things as they are and using that partition since it s showing up different ways Discwizard only shows that partition as a separate drive there is no quot unallocated space quot showing on the TB drive Is this something I sh... Read more

A:New hardware + Win7 installation = headaches

Update: Wired connection issue is fixed. I have to (sheepishly) admit that I completely forgot to install the router via the CD that came with it. The lousy wireless performance is still a problem, though, as well as the hard drive/partition issues.
Relevancy 40.85%

I cloned my failing hard drive (a 160gb) to a new one (500gb). The installation seemed to go smoothly enough (it was my first time though) as it just required me to stay grounded and remove about 4-5 screws. When I loaded the PC up it wouldnt start the first time so I had to a Windows repair, which didn't seem to do anything except now it worked (it said it failed or something). I then had an issue with Windows 7 claiming to not be genuine although for one reason or another that stopped. Now my issue is that I am unable to access the additional memory of my new hard drive, I am able to access the cloned portion but not the rest (about 316gb). Any help would be appreciated, my PC is a Dell Latitude E6400 if that helps.

A:Inaccessible Memory on Cloned Hard Drive

Hello there,

It is absolutely normal not to see the rest of the free space in the moment. When you clone a drive you create the exact same image of old drive on the new one. This includes the size of the original HDD. However if you go to Disk Management ( type diskmgmt.msc in the search in the start menu and hit enter) you will see that you have one partition of 160GB and the rest of the space will be listed as unallocated. To use it you have two options ? you can create a second partition or you can extend the original one to take all the available space.

To create a new second partition just right-click on the unallocated space and select ?New Simple Volume?. This will starts a wizard to guide you through the rest of the process. First it will ask about the size of the partition. To use all the remaining space just type in the same value you have for Maximum disk space. Click Next.

Then you will get to choose and available drive letter to assign to this partition. Choose one and click Next.

Then you get to the Format partition window. You should choose ?Format volume with the following settings: ?. For the file system is best to leave NTFS. Allocation unit size as default. You can also put a label for the volume here. Then tick the box for ?Perform a Quick Format. ? Click Next. Then Click Finish. And you're done.

If at any point Windows pops up with the following message ?The operation selected will convert the disk to dynamic... are you sure you want to continue? ? click NO as this will most probably make your Windows unbootable and you will have to reinstall it.

If you want to extend the existing partition right-click on 160GB partition and select ?Extend Volume?. It will start the wizard and will only ask about how much space to add. Just select the maximum available space here and click Next, then click Finish. Once done your existing partition will be bigger and you'll be able to use all the space on your new HDD.

Hope that helps.
Relevancy 22.36%


if anyone can help ill be really thankful.
pc 1, 2 runnging win7 ultimate x64

1 adsl modem, 1 tp-link router, 2 computers (pc1, pc2).

ADSL(modem) - LAN1 - PC1 , LAN2 - Tp-link
Tp-link - LAN1 - PC2, WAN - ADSL(modem)

Everything is working, but computers cant see each other in HomeGroup.
Tried various methods but nothing work.

So my question is how to set HomeGroup for those 2 computers. Any suggestions?
Thank you

A:Win7 Homegroup problem

@Moirax . I can't answer your question, but your mention of Homegroup makes me ask what is it for? To avoid hijacking this thread,I'll PM you.
Relevancy 41.71%

Hello all,
Most of memories, RAM, ROM, HDD, DVD-RAM and others are
random access. What are some non random access memories please?
Relevancy 42.14%

Compatible memory
I plan on upgrading the ram on an older laptop.
It comes with IGB DDR2 PC2-4200 533MHz SODIMM, can I add
IGB DDR2 667MHz SODIMM to the spare slot and will it detect it?
Thought I'd ask before attempting!

A:Compatible memory

Hard to say, there is only one way to know, that is to try. I'm assuming you have the modules in question. Otherwise I would suggest buying modules of the same specs to increase chances of compatibility.
Relevancy 24.51%

Hi guys
lately I changed my windows from 7 ultimate to another 7 ultimate
then my hell started ... my CPU Usages just jump high with out any reason ... when no program running it jump to 15% ... browser take more than it should take ... and if I open any online game it jump to 70-80% which should not happen I used to open all things I want at once and have near 20% cpu usages
I tryed every think closed back gorund programs and scan for virus or malwares I tried a lot of things but still nothing no change still high ...
how can I fix this ?!!!!

A:High CPU Usage

Hello, can you post your full system specifications? Also, are you sure this new Windows 7 copy is legitimate and not pirated?
Relevancy 22.79%

I have a sony SD Card 16gb class 4 card. I did use the card for almost 3 months, when I tried to use it now, I am not able to access the card,

I tried recovery softwares like recova etc to recover the file, but I was not able to recover even a single byte.

I have many importants files in the CARD, PLEASE HELP ME...,.


A:Data recovery SD Card not accessible, says incorrect function showing unknown format

I think >>this thread<< could help you out . He seems to have the same problem.
Relevancy 24.51%

Hi everyone Just to let you know I know hardly anything about computers but desperately need help All programs on my laptop have been responding badly or not at all for quite a while Today I wanted to see if there is anything I can do about it I noticed that the CPU usage is up to a almost constantly First I used QuickClean then I ran a full virus scan nothing detected Next I googled about this problem CPU constantly 100% usage and found information about performing a system file check which I did again nothing detected Next I have done a disc scan and again nothing detected When I check under processes in the task manager I cannot see anything suspicious but as I said before I am not that familiar with computers Is there anyone who knows what I could do to find the problem I am using Windows by the way I urgently need my laptop to run effeciently to use it for work And before CPU usage constantly 100% anyone suggest to resrote it to an earlier backup I can t because it has been going on for a long time and I wouldn t know how long back to go and probably loose a lot of files Also completely rebooting it isn t an option because when I bought it new it came with windows and Microsoft Office pre-installed and I haven t got any recovery cd s If anyone can help that would be fantastic please don t forget to not use technical language but for normal pc users like me - Thank you very much nbsp

A:CPU usage constantly 100%

Caty80 said:

Hi everyone.
Just to let you know, I know hardly anything about computers but desperately need help.

All programs on my laptop have been responding badly or not at all for quite a while. Today I wanted to see if there is anything I can do about it.
I noticed that the CPU usage is up to a 100 % almost constantly. First I used QuickClean, then I ran a full virus scan... nothing detected. Next I googled about this problem and found information about performing a system file check which I did... again nothing detected. Next I have done a disc scan ... and again nothing detected.

When I check under processes in the task manager I cannot see anything suspicious but as I said before I am not that familiar with computers.

Is there anyone who knows what I could do to find the problem??? I am using Windows 7 by the way. I urgently need my laptop to run effeciently to use it for work. And before anyone suggest to resrote it to an earlier backup... I can't because it has been going on for a long time (and I wouldn't know how long back to go and probably loose a lot of files). Also completely rebooting it, isn't an option because when I bought it new it came with windows 7 and Microsoft Office pre-installed and I haven't got any recovery cd's.

If anyone can help that would be fantastic (please don't forget to not use technical language but for normal pc users like me ;-)) Thank you very muchClick to expand...

Open up task manager and click the processes area, then click the spot that reads CPU and take a screenshot so we can see what is running your system up.
Relevancy 42.14%

Hello all,

I installed a Windows XP x86 on my PC. But when I open the system information window in the System Summary tab, in the right-hand pane and at bottom the following are written:

Total Physical memory 768.00 MB Available Physical memory 270.41 MB !!
Why Available Physical memory is 270.41 MB please?

PS: My system is very slow and also very slower when start up. Isn't that less Available Physical memory the source of that slowness?

A:Available physical memory, XP

You have only 1Gb of ram installed on the motherboard and XP is using 768Mb which isn't leaving much over. You need to install more ram. It depends on what you are using the computer for but I'd say you want at least 2Gb ram.
Relevancy 22.79%

I finally bit the bullet and upgraded yesterday Before installing the new OS I installed g of ram gb sticks Got thru all the installation BS my goodness Microsoft eats up a from Upgraded XP to Win7 lot to memory with all those updates Any way I was checking out the specs on my systems on the My Computer page and it only shows that I have g of Ram The other problem is I have a gb but it s only showing that I have gb total I know you want my system info so I ll do Upgraded from XP to Win7 the best I can AMD Athlon tm X Dual Core Processor Ghz bit I m going to check out my memory sticks Maybe one of them isn t seated properly I have them side by side as it was shown in my MB book but was wondering if I should skip a slot Also is there something I need to do about my drivers I m really worried about my HD space I know before the guy who built my system had a partition put in That got wiped out when I tried to to a repair on my Windows XP and had to do a clean install When I got the system back up and running it showed all my HD space now I m barely showing a third of the space that should be there I m really at a lost nbsp

A:Upgraded from XP to Win7

Well since no one is answering, I'll get you up to date. I found my lost HD memory and got it all back, so I'm at full capacity there. As for my sticks of RAM, I just don't know. I removed one, but the system wouldn't boot. Then I put the other one in and the system still wouldn't boot. So I put them both back in and the system booted right up. I'm getting the feeling that I bought 2 2gb or ram and ended up with 2 1gb sticks. Also, I thought the system was suppose to recognize when you put new ram in. Mine didn't.
Relevancy 24.51%

Hi folks,
I am new to to TECHSPOT,please bear my ignorance.
I want to use my laptop for downloading purpose.I like to download movies and documentary films and watch them later.
Can you guys suggest me a laptop model with their specifications so that I can go for it an buy the same.
Which will be a better option an AMD or an INTEL processor

My usage would be say 8-10 hours daily which would include 2-3 hours of watching downloaded movies, surfing various websites and of course socializing a bit.and this would be almost a daily affair.

A:Non stop usage of laptop

Any laptop will be fine.
Relevancy 22.79%

I have networked PCs before many times successfully so this is not my first time trying to network PCs in a home environment Though I m wondering if Windows is part of the problem I would have thought that for sure until one of the name credentials bad password? user with unknown even correct failure: or "Logon new laptops running W would not connect to any of the other three PCs Laptops running W Yet these other three W PCs Laptops CAN connect to this laptop Then it gets a little more "Logon failure: unknown user name or bad password? even with correct credentials interesting this same laptop that couldn t connect to those three W PCs Laptops CAN connect to a Windows desktop and a XP Laptop and those two can also connect back to it without issue It s almost like my network is divided in half and only half can talk to each other But then when I thought it couldn t get any more interesting I realized the first three W PCs Laptops can talk to the others it s just that the others W Laptop W Desktop XP Laptop can t talk back to them without getting the error quot Logon failure unknown user name or bad password even though the username and password are correct I don t fully understand this error because on the surface it s just WRONG My username and password are correct but it appears something somewhere is interfering or hijacking the authentication process Three of the computers laptops are brand new just purchased last week and setup this week The HostPC is also fairly new just purchased last month I am not using a HomeGroup and have removed all computers that were part of a HomeGroup I have enabled file sharing and network discovery and enabled Use user accounts and passwords to connect to other computers on all PCs I have DSL and am using the wireless modem provided by my ISP which has router functionality built into it It is a Sagemcom Model F ST N All computers are connected wirelessly Time is correct on all PCs I cannot use Group Policy since they re all Standard or Home edition DHCP is enabled and all computers are on the same subnet using the x range of ip addresses The six computers are as follows I figured this may make is easier to visualize the layout HostPC HP Desktop W PC Name DrsBlend U N DrsBlend p w not showing my real password PC HP Laptop W PC Name DrsBlend- U N DrsBlend P W PC HP Laptop W PC Name DrsBlend- U N DrsBlend P W PC HP Laptop W PC Name DrsBlend- U N DrsBlend P W PC HP Desktop W SP PC Name DrsBlend- U N DrsBlend P W PC Dell Laptop XP SP PC Name DrsBlend- U N DrsBlend P W Every PC stated above has the same user name and password and is logged-in with the username DrsBlend and the password The quot Logon failure unknown user name or bad password happens when trying to access HostPC PC or PC from PC PC or PC The HostPC can see and connect to all the PCs but only PC and PC can talk back or access the HostPC It s like the HostPC and PC and PC are in their own little clique and can talk back and forth to each other Those three PCs can also talk to PC PC and PC as well but PC PC and PC cannot talk back to them HostPC PC PC Profile corruption I would have entertained that thought but the fact the first three PCs can access and talk to one another kind of defeats that idea and the fact the PCs were just recently setup Firewall Disabled and disabled TrendMicro with no change With them on off the first three PCs can still talk to each other and the rest of the PCs Anyone have any additional suggestions nbsp

A:"Logon failure: unknown user name or bad password” even with correct credentials

I experienced a similar problem when I was trying to network my 8.1 machine the host network. As you say the host PC can see and connect to all of the machines, but not the other way around. Not sure if it is the same in your situation but I found that Microsoft's idea of network sharing on the Windows 8 class of OS differs greatly from previous OS's in that you can connect to it from an external host, but when trying to do the other way around it doesn't "see" the PC in question due to differing network sharing protocols included in the OS.

Anyone feel free to correct me if I am wrong, I am speaking only from what happened with my network.
Relevancy 22.36%

I bought a Samsung 840 SSD (120GB) for my gigabyte GA-770T-USB3 motherboard. I am unable to install win 7 64bit on it. It is a SATA SSD.

I have tried ACHD mode in the BIOS, I have tried IDE mode. The drive works as I have tested it as an external drive on other computers.

I bought the drive specifically to be used as a primary drive.

My regular hard drives work fine on the motherboard.

A:Unable to install SSD on Win7 x64 system

Well, first of all, your motherboard only supports 3GB/s and the 840 is a 6GB/s drive. Just by that you won't really get your moneys worth. And how so are you unable to install? Also can you please list your system specs?
Relevancy 22.36%

Hi All Right problem As stated above my laptop does not recognize my external The drive spins up inside the enclosure the power led lights up but it does not show I have been a Field Support Engineer Tier III for many years and following that a Technical Analyst all within the IT field and this one on not hdd recognize Win7 does external Compaq6710b has me totally STUMPED Steps followed Checked Win7 on Compaq6710b does not recognize external hdd Compmgmt - gt DrvMgmt drive does not show same as DevMgmt msc - gt Drvmgmt Went into CMD prompt - gt Diskpart - gt list disk only picks up my primary internal I e disk I have moved the hdd from one USB port to another - still no difference I have tried disconnecting and reconnecting it multiple times - no avail Tried rebooting - no avail Tried rebooting both with without the external connected - no change Connected the external to multiple other machines - it picks up on every single one of them Run RSOP machine is on a domain but there are as confirmed by domain admins no restriction policies in place seeing that my other smaller in capacity flash drives all pick up and show Ran a full malware scan - clean with the following in turn not at the same time also not installed simultaneously MBAM MSSE AVAST ESET - All came back clean Ran CCleaner getting desperate now and after all cleaning and clearing etc sorted rebooted machine - still no change Checked if the drive shows in BIOS upon restart - it does Just to slam dunk point above - checked if the drive shows as a possible boot media upon reboot - it does Only thing left to do is to try any Linux Unix based boot GUIs to see if it shows in thee as wel apps in the line of Knoppix to name but one Oh yeah also accessed the Advanced Properties af all the available USB Root Hubs and ensured that the computer is not allowed to turn off these devices in order to save power I have also downloaded EVERY POSSIBLE LATEST DRIVER from HP s site so everything THERE is up to date all drivers and firmwares up to date Flashed the CMOS Updated the BIOS as well If I connect any of my flash drives or any other mobile device tablet phone usb modem with micro sd card installed configured as storage to the laptop they all get recognized and are accessible but NOT my external even though every single other machine I have connected it to picks it up As per all my points above please do not suggest the following A Use of various or random drive checking tools - they won t work as the O S does not recognize the drive B Right click quot My Computer quot anything starting with that will be a waste as I have already gone through all those steps by means of accessing all relevant interfaces via cmd line interface - I cannot see the drive so I can also NOT change it s drive letter just read another post on another forum where the OP requests assistance as he cannot access his drive at all kind of similar to my scenario and the suggestions on there drove me out the walls - people missing obvious things and making suggestions which would be declared useless by using some common sense I am going to try and upload prt shots of both diskpart cmd result and compmgmt msc results okay failure with bmp jpg and png HA loaded successfully Any assistance would be appreciated Oh yeah it is a USB powered quot external hdd not the quot type which requires external power nbsp

A:Win7 on Compaq6710b does not recognize external hdd

Have you tried your Ext Hard drive to be connected to any other PC or Laptop. If the drive is still not recognized consult an expert for this.
Relevancy 22.36%

Hello I have been experiencing with Video 7870 Win7 in Stuttering 64 an ongoing issue with video stuttering when using vsync and screen tearing when not of course in certain games Here are my specs Desktop PC OS Win -bit Intel Core i Ghz Motherboard ASRock Z Extreme GSkill Ripjaws GB DDR RAM AMD Radeon HD GB driver CCC -display setup monitors Video Stuttering with 7870 in Win7 64 x x Video Stuttering with 7870 in Win7 64 and one TV Video Stuttering with 7870 in Win7 64 at x HD Samsung SSD PRO GB HD OCZ Agility SSD GB HD Seagate HDD TB HD WD HDD GB This issue is present throughout all games and videos to varying degrees It becomes apparent when any smooth movement is supposed to occur such as camera panning or forward movement in fps games for example In certain games it is barely noticeable such as Borderlands however games Trine or Dead Island are virtually unplayable due to the amount of stutter when moving In other games I experience tearing unless forcing vsync with triple buffering with D D overrider I have tried changing the vsync settings in the individual games as well with no change I have tried a number of solutions recommended from various boards such as reinstalling installing older drivers I am using an ATI radeon HD and have downloaded and removed installed just about every driver version I could get my hands on I have also been lucky enough to have access to a great deal of spare parts As such I have swapped the following components with known-good ones with no result - Power supply - CPU - Motherboard - Hard drive SSD - full reformat as well The previous graphics card a also experienced the exact same problems initially I replaced this card in an attempt to solve the stutter issue but it remained exactly the same I have run memtest and had no errors I have run certain problem games off of a different hard drive and on different monitors of my setup and produced the same result Computer has been fully scanned cleaned of malware etc Running Malwarebytes CCleaner and MSE I m at the end of my rope here Not sure what else to do Seems like this is a tricky issue none of the solutions I have found while searching has worked but I m hoping I missed something crucial Any help suggestions would be appreciated If you need any more information please let me know Thanks for your time nbsp

A:Video Stuttering with 7870 in Win7 64

In-game Vsync sucks for many games, the problem being some games tend to be biased towards one company and that causes the other company Graphics card to run poorly in it.

Try downloading Radeon Pro, its a custom tool that helps for games like that on AMD cards that run into issues with Vsync. Once installed, all you do is add the games your having problems with, go to the options surrounding the games sync, and set it to use dynamic Vsync with the refresh rate of your monitor (You can also add your monitors refresh in).
Relevancy 42.14%

I wanna make sure I done all steps before sending these 2 new sticks of memory back to newegg because there defective.

2 new sticks match the old stick. G.Skill, F1-3200PHU2-2GBNS, DDR-400, CL2.5-3-3-6 2.5 ~ 2.75v, PC3200 1Gx2

The 2 old sticks works in all 4 memory slots. New memory sticks does not.

When the PC completely boots up I get lines on the monitor and freezes PC up after done booting everything. I reboot PC then get check sum error on the black boot up screen with F1 to continue or F2 enter setup.

Acer Aspire T160 desktop

A:New Memory Issues

That's a bit too old for me to be confident giving suggestions, sorry.
Relevancy 42.14%

So, memory timings: 10-10-10-27.

Is that crap?

Edit: Is 9-9-9-24 better? I'm under the impression that the smaller the number the faster the ram.

I'm currently using this memory, it says the timings are 10-10-10-27. I looked in my bios and the timings were set to 9-9-9-24 so I changed them to match the RAM.

Is that recommended or should I have left it?

That's the wrong memory I linked to, I have this. My timings actually are 9-9-9-24. I'm trying to find my command mode, does anyone know what it is for this memory?
Relevancy 24.94%

I have a Macbook pro quad core gig ram running windows ultimate on bootcamp CPU usage 100% All of a sudden when I booted into windows my CPU usage would spike and stay at percent The only way to solve this was to open task manager I ran numerous scans and nothing seemed to solve the issue I then went into control panel and went to performance issues and when I ran the check I found this in my startup folder crssc exe and yrkpack I have done 100% CPU usage a search on yrkpack and found nothing but on the crssc exe I did find this Most antivirus programs identify crssc exe as malware for instance Microsoft identifies it as Backdoor Win Sdbot and Symantec identifies it as W IRCBot Gen I have disabled them both and will wait to reboot I have also found on the net that percent cpu could be caused by a corrupt file in your user profile If the first does not work I will delete and 100% CPU usage re create a new profile and see if that works nbsp

A:100% CPU usage

iaveight said:

I have a Macbook pro quad core 16 gig ram, running windows 7 ultimate on bootcamp. All of a sudden when I booted into windows my CPU usage would spike and stay at 100 percent. The only way to solve this was to open task manager. I ran numerous scans and nothing seemed to solve the issue. I then went into control panel and went to performance issues and when I ran the check I found this in my startup folder
crssc.exe and yrkpack. I have done a search on yrkpack and found nothing but on the crssc.exe I did find this. Most antivirus programs identify crssc.exe as malware, for instance Microsoft identifies it as Backdoor:Win32/Sdbot, and Symantec identifies it as W32.IRCBot.Gen. I have disabled them both and will wait to reboot. I have also found on the net that 100 percent cpu could be caused by a corrupt file in your user profile. If the first does not work I will delete and re create a new profile and see if that works........Click to expand...

UPDATE - Fix worked I disabled the two files I found with the windows performance issue check in Control Panel
Relevancy 24.51%

I recently came across an interesting question that I couldn't answer due to my limited knowledge in the field at present. Before I get to the question, I do understand that Motherboard RAM is not GDDR, this is a question of theory.

Suppose I have a Single CPU on a motherboard. Would it be working harder if used in conjunction with GDDR5 ram vs DDR3 Ram? Whatever the answer is, could you provide an explanation please. This is merely curiosity.

A:CPU usage in conjuction with RAM

Well, GDDR refers to Graphics Double Data Rate. RAM is used for temporary storage of data, where as the GPU processes video and then uses it's own temporary storage (GDDR) for handling data from the video. Now, if you were comparing DDR3 to DDR5 the winner would be DDR5. But here you can't compare them because they don't work for the same purpose.
Relevancy 22.36%

I reinstalled Windows 7 (64bit) after moving to an SSD. Now, for some mysterious reason, I can no longer read UDF format discs (all Blueray and some DVD's are UDF).

Microsoft's Knowledge Base posts a "hotfix", but it didn't work.

I searched online and lots of people seem to have this same problem, but no one has a fix.

How is it I can WRITE udf discs but not READ them? What a pain.

(Note: I can read the discs in XP and Linux, just not Win7. Copying the discs to the HDD every time I want to read them is not a long-term solution. And I can't copy commercial BD discs anyway.)

A:Can't read UDF format discs (Win7) is for XP, but does contain some useful information and possible work-rounds. At a guess, I would expect MS to address whatever they have done wrong before too long. In the meantime, an update of the Win7 DVD driver (and/or firmware) for your actual hardware might be available. Try the website of your DVD manufacturer.

At worst, if there is no software solution within a couple of months, you might have to consider replacing the drive, at least you can return a new drive if it fails you too.
Relevancy 24.94%

Hey Guys,

I've posted something similar about this around several months ago but since the problem seems to be gone, I decided to let it go but now, it comes back . There wasn't any real solution from my last time so I decided to bring it up once more. So yeah, pretty much the same problem, the CPU Usage jumped to around 90-100ish and my in-game FPS drop to around 5-10 so it's been really bugging me.

My system specs:

System Manufacturer: Alienware
System Model: M17xR3
Processor: Intel(R) Core(TM) i7-2820QM CPU @ 2.30GHz (8 CPUs), ~2.3GHz
Memory: 16384MB RAM
Available OS Memory: 16366MB RAM
Page File: 8091MB used, 24638MB available
Card name: NVIDIA GeForce GTX 460M
Manufacturer: NVIDIA
Chip type: GeForce GTX 460M
DAC type: Integrated RAMDAC
Display Memory: 4048 MB
Dedicated Memory: 1488 MB
Shared Memory: 2559 MB

Any help would be greatly appreciated

A:90-100% CPU usage

Well, if im reading correctly, the CPU usage is due to google chrome, you have like 10 processes running just google chrome on that page alone and some of the pages are eating up your CPU according to the chart.
Relevancy 40.85%

Recently I was doing a research about a memory update for my G - LA Notebook and in many websites including the Netbook User s Manual I found that this Notebook could be upgraded up to Gb of memory So Upgrading Notebook Failure G42-365LA HP Memory I bought two RAM memories of Gb each one SoDIMM DDR PC - MHz according to researched specifications But the thing is that when I installed them I couldn t enter into the OS it sent me to the Windows Error Recovery window directly and whichever option I choose it reboots and it keeps doing that Well I tried installing just one memory alone and the result is different it came up with the BSOD giving me different errors each time I reboot the Netbook These errors are BAD POOL HEADER PFN LIST CORRUPT IRQL NOT LESS OR EQUAL I ve tried to reinstall the OS with memories installed but the result is the same My Notebook is a HP G - LA Windows Home Premium x Service Pack Intel Core i CPU M GHz I don t know if I was cheated by the manufacturer website and or the others websites that s why I need your help P S When I installed just one memory module I can see The Windows intro logo but just for two seconds or so And I tried to install quot Ubuntu desktop amd x quot with just one Gb memory module inserted and everything was good but it wasn t with the two cards installed nbsp

A:Upgrading Memory Failure HP G42-365LA Notebook

One of the stick of ram maybe bad. Try them each one at a time.
Relevancy 40.85%

This was posted by Corsair a couple of days ago. What does everyone think? Is this just an attempt to get people to upgrade to shinny corsair ram, or is this finally a reason for gamers to have good ram/ overclock our current sticks?

A:Battlefield 4 loves high-speed memory?

No way the average FPS increases by 20 just by adding faster RAM (1920x1200 ultra graph)... BF3 barely gains 3 FPS from high speed RAM. It is just bloated graphs and marketing.
Relevancy 24.51%

Well my cpu usage goes up to anything CPU whenever 100% open I usage or run whenever I open anything explorer or fire fox or when I try to install a program that s my pc Processor Inter R Pentium R CPU GHz GHz Installed memory GB Display adapter Nvidia Geforce GS I 100% CPU usage whenever I open or run anything tried the next but didn t succeed 100% CPU usage whenever I open or run anything to solve the problem - performed an virus scan using kaspersky and Avira - performed spyware scan using spyware doctor - performed malware scan using Malwarebytes Anti-Malware - reinstalled the OS several times tried windows seven ultimate and bit and windows xp sp bit - formatted my hard disk then installed a fresh copy of windows - checked the CPU temperature and made sure it s fine - tried removing one of my rams - tried working with the build-in VGA card instead of the nvidia one - tried restoring the BIOS default setting - even tried changing the processor itself but with an older one - and of course tried to see which progress sucks up the cpu usage and the result is that every program I open gets to of the cpu usage and yet I couldn t solve this problem wonder if any of u can help me thanks in advance nbsp

A:100% CPU usage whenever I open or run anything

Rick said:

In the Task Manager, if you were to click "Performance" and then enable "Show Kernel Times" under the "View" menu, what do you see? There should be a red line which indicates kernel times. If the line is abnormally high, then that's a good clue this could be driver related or hardware related.Click to expand...

Thanks for your reply!

I don't know if that's abnormal or not, but you can check that photo and see

sorry I couldn't post it as an image.
Relevancy 40.85%

I need forum recommendations on good reliable memory sticks, 4x4 GB or 8x2 GB (don't sure which is better). Mostly PC will be using for games and some audio recording.
Don't know which clock 1866 or 2400 (O.C.) for motherboard will be better.
Can somebody share his experience with me?

Thank you!

A:Memory advice for Asus Sabertooth X79 & I-7 3930

First, you should know that X79 is the first (and only) consumer platform with a quad channel memory controller. That means for maximum memory performance you must use at least 4 DIMMs, populating channels A, B, C, and D.
The Sabertooth X79 originally supported up to only 1866 MHz, but I see the QVL lists kits up to 2400. X79&hashedid=RPOIwd0pKLoXnbFV
If you buy a kit on this list, it has already been tested to work with your board, at least at stock CPU speeds. If you overclock your CPU (and you should with that unlocked processor), some of the higher speed RAM may not boot. I believe you'll be safe buying a 2133 kit, even one that's not on the QVL. I'm running Kingston HyperX Beast 2400 in my Asus P8Z77-V & i5-3570K system with great results, and it's not on my QVL. If you do go for the 2400, you should pick one of the 4x4GB kits from your QVL for assured compatibility. If all those are hard to find (or too expensive), roll the dice and get the kit you want, but make sure it's a name brand like Corsair, Adata, G.Skill, Patriot, Kingston HyperX, Crucial, etc., as they have reputations to preserve and do lots of testing on all platforms.
Also, check out this recent thread about whether or not fast RAM is worth the money -
Relevancy 41.28%

My motherboard is a Z77 Asrok Extreme 6.

It has four dimm slots. I have One kit of 8 gigabyte memory from Gskill that is DDR3. 'dual channel' (11-11-11-28) PC 2133.

If I get another kit of 8 gig from ANOTHER vendor and its different timings can I put them into the alternate slots and have it work? Say I buy Corsair (9-9-9-9) PC 1600. Would the two kits work against each other since they are different timings? Is this NOT recommended?

Here is another better question. What if I buy the exact same memory from Gskill and drop them in as well? So I have two kits of dual channel 8 gig ram for a total of 16 gigs. Both kits would be same type/speed and latency. Will this work or do I need to use 'quad channel'?

Edited for spelling.

A:Question about installing memory modules

Larsenex said:

If I get another kit of 8 gig from ANOTHER vendor and its different timings can I put them into the alternate slots and have it work? Say I buy Corsair (9-9-9-9) PC 1600. Would the two kits work against each other since they are different timings? Is this NOT recommended?Click to expand...

I'm thinking that different timings will cause issues with Dual Channel functionality. I'm also thinking that Dual Channel only functions if all modules can operate in dual mode. If you are not planning on operating in Dual Channel mode, I don't think it matters. However the modules should operate with the same timing, if they are to be linked together.

Anyway without actually knowing for sure, those are my thoughts.
Relevancy 42.14%

Greetings Tech memory 64 Pro 7, bit Windows More why? and Folks I have More memory and why? Windows 7, Pro 64 bit since found out that one of my memory modules is bad I am a gamer and built my system Currently my system spec is as follows Intel I K overclocked to ghz I used the default OC settings on Motherboard Asrok Z Extreme motherboard gigs of Gskill Ripsaws DDR PC module died now running on gigs Corsair Gold PS EVGA Geforce GTX w gigs onboard Win Pro Seagate Barracuda Terrabyte Drive rpm OCZ gig SSD This is used as a cache drive using Intels SRT technology set to maximized I play raid EQ high to very high settings Distant worlds all expacs Civ The Secret World X Gal Civ Heroes III and IV and I spend hours up every night correcting people on the internet ok not really I also occasionally watch HD movies I have downloaded via HDMI too my TV I also use my computer for work I typically have spreadsheets open along with a browser with or tabs open in addition to using Open office for documents Oh and lets not forget using Pandora streaming my music while I am working Now I am going to replace my module and get back UP to gigs of ram My question is do we REALLY need more than gigs for ram Also in Win is there anything I should set or reset to optimize its performance such as the page file or anything else I used to set the page file when I had Win XP but since we have so much ram nowadays I thought we no longer have to bother Any advice is most welcome nbsp

A:More memory and why? Windows 7, Pro 64 bit

This question is a Windows OS question, why was this moved to hardware?
Relevancy 41.28%

I m gathering components for Other - & Devices PSU Motherboards, compatability Memory, my first PC build And guess what I have a few questions The rig will be a dedicated gaming rig primarily racing games might get into flight sims Looking for reliable gt fps at or just below p single quot - quot display Will keep my current PC for non-gaming duties budget limit less the display and peripherals Will get into Motherboards, Memory, PSU & Other Devices - compatability OC but conservatively and not right away Don t expect to go SLI but might eventually Components bought or en route Corsair Carbide R mid tower ATX Win -bit Home Premium SP OEM disc Core i - K Mobo Asus Z -A LGA HDD TB WD Blue And looking at Gigabyte GTX GB prettly much decided - bang for Motherboards, Memory, PSU & Other Devices - compatability the buck and sufficient Motherboards, Memory, PSU & Other Devices - compatability for purpose price going down and rebate this month Memory GB x GB DDR SSD GB Crucial m SATA Gb s I like the price doesn t have to be the best looks like immediately installing latest drivers should take care of reviewers complaints ODD Lite-On iHAS - PSU Corsair Enthusiast Series TX M W modular subject to further research but I like this From the Asus web site I ve downloaded the Memory Qualified Vendors List QVL and the Devices QVL Too much information and not enough The memory list is extensive the devices list is not My central question is how important is it that I select memory from the Memory QVL and likewise the PSU from the Devices QVL Just looking at the devices list it is clear that not being on the list does not mean a particular part won t play nicely with the Z -A The Corsair PSU selection is very limited What should I focus on other than price Thanks for your help Frank nbsp

A:Motherboards, Memory, PSU & Other Devices - compatability

I presume then, that although it may be somewhat important to be guided by the Memory QVL (simply because it seems so comprehensive), the Devices QVL can be ignored. Will proceed accordingly.

Relevancy 22.36%

I have no idea where to start loking for solutions. NBegining about an hour ago, no key wil work twice in a row. Backspace wil only back up once, delete wil only delelt one character in a row, page-down wil ionly page down one page and not more.
If I go do something else, and come back, the key wil work again. So, by combining delete and backspace and arrow keys and re-positioning the mouse, I can type whatever I want - it is just taking a lot more effort! -Any ideas? I would put a bu nch of excalamation marks, but this is al I have: !

A:No key will work twice in a row Win7 Dell E5430

More info - this is happening in MS Word, Notepad, the IBM SPSS Text Editor, and Google Chrome search blank. So, not just MS Ofice.
Relevancy 24.08%

I was curious if anyone who has Spotify Premium and uses it regularly on their smartphone could tell me approximately how much their monthly data usage is. I was planning on getting 4GB and was curious if this would be enough with using Spotify.

Relevancy 21.93%

I m having a terrible time with one win Win7: no or DHCP internet browsing but Can DNS ping bit computer on my home network All other devices about work fine other Win7: Can ping DNS but no DHCP or internet browsing windows pc works fine ADSL router and Cisco switch work fine This one Dell Vostro with a cable into the network worked fine for years Overnight it can t connect to local network with its DHCP settings and if I change to static ip it still can t browse the internet However I can ping external addresses by IP address only If I ping google com eg it cannot find the host What is really confusing is the quot Ping Statistics for quot response contains neither the name or the address but instead random characters ie this changes every time all other devices on the same network resolve IP adresses to their fully qualified domain name I have been through loads of sites and support flushing dns flushing IP restoring the pc to a previous working point changing the network cable and port installing a USB wireless key which works on this pc manually configuring IP addresses reseting the IP and WINSOCKs with Netsh commands I ran anti malware Combofix virus checkers zone alarm all found nothing I booted into a linux instance but still couldn t browse the net I cabled two pcs back to back and could ping each other from each other then restored the cable to the bad Dell I still didn t get a DHCP address but with manual IP gateway and DNS I could ping but not browse I have run out of ideas anyone help Oh it s win professional and there may be a few more things I ve done but forgotten in the post above Obviously changed drivers on NIC and installed drivers for the wireless USB NIC nbsp

A:Win7: Can ping DNS but no DHCP or internet browsing

Booting from a Linux rather than an apparently faulty Windows OS is my favourite way of deciding I have an actual hardware fault.
Relevancy 36.12%

A little a while ago I made a post here about my new PC which is the new Haswell platform and WiFi news leak from ASUS AC that among other things I bought ASUS PCI-AC WiFi AC news leak from ASUS WiFi ac card which was supposed to be a kick-a at Mbit s data rate That product turned out to be simply non-functional on any Haswell chipset and ASUS is rushing out an update on which there is no information on the internet yet so I wanted to post it here which came from an ASUS engineer According to that engineer ASUS is about to release PCI-AC WiFi ac card which will offer at least two things Rectify all issues for Haswell products Unconfirmed but looks WiFi AC news leak from ASUS like it will bump the speed to Mbit s in line with the other AC product they just released - RT AC- U I was advised to wait for about one month till it appears on amazon com and then ask for exchange to my AC that s currently sitting idle EDITED For any admin who reads it feel free to move this post over to the Networking section nbsp

A:WiFi AC news leak from ASUS

Why does it not work with Haswell? That is quite odd.
Relevancy 30.53%

I've heard its best to turn the volume ALL the way down on ANY sound pruducing item whether it be a tv,stereo,computer etc,etc before turning it off. Any feedback , good or bad

A:Speakers in general

Yes , I have heard this . It is suppose to be easier on the speakers. Plus easier on the ears when the device is turned back on.
Relevancy 41.28%

I just came from a retail store to check on prices but most of their parts weren't available anymore. Instead of a G. Skill Ripjaws 2x4 8gb DDR-3 1600, the clerk offered me a Crucial Ballistix 2x4 8gb DDR-3 1866 memory. The board I'm gonna buy is an Asrock H77 Pro4/Mvp but looking at their memory support list Pro4/MVP, it doesn't seem compatible.

The clerk had told me it was compatible and that he had tried it before but I'm not sure if it'd have unwanted effects over some period of time. (I got drawn in by how the memory looks and its LED so I'm including it as a choice). Thanks.

A:Is a 1866 memory compatible with an H77 board?

It will be compatible, worst case scenario is just setting your 1866Mhz RAM to run at 1600Mhz. You're getting quicker RAM for free.
Relevancy 24.51%

Hi,today I was installing crysis 2 and decided to do something in the mean time,whenever I clicked a folder or opened a video it hanged and my pc was drastically slow ,and I saw my disk usage was 100%
any solutions?

A:100 % disk usage

You will need a larger drive, unless you can free up storage by moving some of the contents.
Relevancy 41.71%

Hi folks, I love to do video editing using adobe premiere, but as videos are recorded more often in HD even from my smartphone feels like there is not enough power anymore.

My system is Biostar Hi-Fi A85W motherboard with AMD A8-6500 and 4 GB DDR3. Now I am wondering if a memory upgrade to 8 GB would really make sense in that case? Or could it be a too slow CPU and I have to replace my current board?

I will be glad to hear your advice!

A:Advice for Memory Upgrade?

That is a newly released CPU, so it is not slow. Plus, it is a quad core. If you just do basic computing tasks, the 8GB will allow you to multitask more. Check out this site for what RAM to buy:
Relevancy 41.71%

Hello guys,

I have an USB flash memory brand PNY. Its speed is very low, that is, when I copy or delete files into/from it, it takes a very long time to be done. Is there a way to speed it up?


A:Speed the USB flash memory up

NO. Most likely you have it inserted to a USB 1.1 slot when it needs USB 2.0.
Relevancy 41.71%

I have ps2 corupted memory card I try too delete the corupted data but it wont ........... and the memory card wont load by the browser ............ plz smeone show way to format it plz
Relevancy 21.93%

I have a really strange situation today that started after I had to reboot our UTM device and then switch We have a wired network although our modem router is also wireless if needed We don t use the wireless normally After rebooting the UTM and Switch all computers were turned back on again one by one of the were up and running and on the network and internet straight away One PC connected to the LAN but cannot get internet access Our DHCP server is on the UTM Internet (Win7) Network Wired Computer no has on One device and each computer has it s IP address reserved This computer had reserved and it still has that IP address when I do ipconfig It can access all the files on our NAS and all the printers on the network I ran all the ipconfig commands to One Computer on Wired Network has no Internet (Win7) release renew One Computer on Wired Network has no Internet (Win7) flushdns I reset winsock and rebooted Still no internet I did a print screen off one of the PCs that is working properly and compared it Apart from the MAC address and other PC specific items I could see no difference So I put a wireless dongle on it to see if it would connect the the internet on wireless It worked I had internet but no LAN other than to the wireless router So I thought there must be a problem with the NIC I went to the local PC store and bought a new NIC card and installed it I disabled the old one and connected the network cable to the new one No difference If I enable the NIC card I have LAN but no internet if I enable the wireless dongle I have internet but no LAN I need both I cannot figure out what has changed on this ONE PC that was working fine until today Oh one other thing I tried that didn t work I connected a brand new Ethernet cable directly from the modem router to the PC So this bypassed the UTM device and Switch Still no wired internet nbsp

A:One Computer on Wired Network has no Internet (Win7)

Try these

(1) shows packets going to google's dns
(2) shows you can convert name to ip address
(3) shows access to our site
Relevancy 42.14%

I bought two 2GB Memory Ram for my Lenovo IdeaCentre K300. I'm trying to find instructions on how to install them. But all I keep running into is where to buy them. Can anybody give me some easy to follow instructions? I'm hoping it's as simple as opening up the computer looking at the 2 full slots and putting the 2 new ones in the same way. being real careful that you don't bend or break anything. Thanks

A:Installing more memory

circusboy01 said:

I bought two 2GB Memory Ram for my Lenovo IdeaCentre K300. I'm trying to find instructions on how to install them. But all I keep running into is where to buy them. Can anybody give me some easy to follow instructions? I'm hoping it's as simple as opening up the computer looking at the 2 full slots and putting the 2 new ones in the same way. being real careful that you don't bend or break anything. ThanksClick to expand...

Don't know if this will help, but hopefully it will
Relevancy 42.14%

I have a Lenovo IdeaCenter K-300 ( 64bit) 2 of its memory slots have 2048MB each 2 are empty.
Is 2048 MB each the same as 2gbs each or 1 gb each? I need to know so I can buy the correct memory for the 2 empty slots. Thanks

A:Adding memory

You have a total of 4gbs in your current config (2 x 2048).
Relevancy 24.08%

Hello I have read a lot of posts on here about personal laptop CPU s usage spiking while gaming watching videos or opening programs I have tried all of the recommendations given reasons unknown for CPU spiking and still have not seen any results Anytime I open any CPU spiking for unknown reasons program game or anything my CPU usage spikes to or higher I have closed all of the processes that can afford to not be running but the that does not help Whatever program is opened or running no matter what it is keeps spiking the CPU An example is if I run a game such as League of Legends it will start out fine with fps but slowly drop to to fps I have set all of the graphics to low and turned shadows off and it does not help My CPU fan stopped working and I took apart my laptop and fixed it and blew it out with compressed air but all that fixed was the heating issue The hottest the CPU gets now is c Before my fan went out I could run anything without a problem I have run AVG Malwarebyte CCleaner updated all the drivers but nothing seems to help Here are some screenshots I took This is just from opening League of Legends This is from opening techspot com Here is a screenshot with the Resource Monitor Here is my system information Operating System Windows Home Premium -bit Build Service Pack win sp gdr - System Manufacturer Hewlett-Packard System Model HP Pavilion dm Notebook PC Processor Intel R Core TM i CPU M GHz CPUs GHz Memory MB RAM Available OS Memory MB RAM DirectX Version DirectX Graphics Card Intel R HD Graphics Chip type Intel R HD Graphics Core i Current Mode x bit Hz Driver File Version English Driver Version Driver Model WDDM I cannot figure it out and its driving me mad Thanks in advance for any and all help nbsp

A:CPU spiking for unknown reasons

First, is your C1E feature activated? Disabling it on my friend's PC fixed a similar issue.
Secondly, can you check which process is spiking? Open the Processes tab in Task Manager and check "Show Processes from all users". See which process is spiking, and kill it if it shouldn't be there, or has an unusual name (like all caps names. example RUNDLL32.EXE). Then see if CPU usage spikes.
Let us know how it goes.
Relevancy 42.57%

Hi guys ! again this is the best website ever !
I was wondering about the way we find out the memory bus of any video card/win 7
my old one was 512/128 ,, now I got my new one which is 1G ,, but how wud I know the other number ? the memory bus I think
Many thanks.

A:Memory bus ?

Try Googling it!! I would...
Relevancy 42.14%

I have an older Toshiba laptop,P205-S7806. I want to upgrade the memory but was told it came with 2gb and that's all it can hold,it is a 32bit. I am not computer savvy by no means so please any help,make it simple. I was told I could change it from the 32bit to 64bit,is this really easy and then can I use more memory..thanks for any help you give me..

A:Memory needed

They were correct, 2GB is the max for your notebook.

Memory Upgrade for Toshiba Satellite P205-S7806 Laptop
Crucial® Memory Advisor results for the Toshiba Satellite P205-S7806 Laptop/Notebook.
Toshiba Satellite P205-S7806 Memory Upgrades
Relevancy 41.28%

Hi I have a TOSHIBA GB I had much important project data on it and I did the most terrible mistake of my life not to back it up when all my other HDD datas are double if not triple backedup stick data recovery Memory It was working fine till late night till in the morning when I plugged it on my computer it told me it Memory stick data recovery sholud be formatted first The drive letter doesn t show up on My computer nor in My devices I tried using the EaseUS Data Recovery sample version but it too cant detect the drive I went through the flash drive data recovery procedure in this forum but I do not understand that if I format the drive the data will be gone Again I do not have a backup to copy it again I dont want to recover using the drive but just the data Please please please help someone if such a thing is possible Its almost months of my hard work An update Now its appearing as Removable disk on my computer and if I click on it its saying insert disk into drive F If I try exploring it the format option is appearing Please please help I need the data nbsp

Relevancy 41.28%

Hello everyone

I am about to buy corsair vengeance 8gb 18660mhz. My mobo is Asus M5A97 LE R2.0. My cpu is AMD3+. Will the ram be compatible with my motherboard. Please answer asap.

A:Corsair Vengeance memory compatibility

Yes it is compatible.
Relevancy 22.36%

Guys,I m thinking about to buy a SSD.Can u tell me how much space needed for WIN 7 64bit.pls include ur space advice that it will also have latest update of win+20% space free(which I found various forum that it is needed for run win smoothly).How about 32GB SSD??????

A:How much space needed on SSD for Win7 64-bit

Personally, I wouldn't use anything smaller then a 64GB SSD. A 32GB SSD will be good for a cache drive but not a boot drive. I think the 128GB & 256GB drives work best. They give you a lot of room for OS + Core Programs.
Relevancy 40.85%

I got a system in recently with a weird issue It would reset after a few sticks, System restarts memory fine two with with one minutes and then shorter and System restarts with two memory sticks, fine with one shorter intervals on restart continually I tested for all the normal stuff power supply temperature unplugged the video card and checked the error logs but only the unexpected restarts were listed with no suspicious events around them If I removed a memory stick it ran fine though I thought it was a bad stick but I ran memtest on both sticks without errors for a few passes Immediately though if I plug in both sticks the system won t stay on for more than a minute or two I adjusted just about every bios setting concerning memory without change and tried loading bios failsafe defaults Anyways I m considering between just telling the owner that the system can only support one ram stick now likely due to some motherboard fault or trying to do a bios update though I m a bit hesitant that if there are issues with the motherboard maybe I should just leave the bios version alone I d be interested in hearing others takes on the issue CPU- AMD Athlon X GHZ Motherboard- amd gm-m RAM- CORSAIR CM X - C MHZ System restarts with two memory sticks, fine with one - - - nbsp

A:System restarts with two memory sticks, fine with one

Often a faulty memory stick will work by itself, but then fail once running in duel channel.

Unfortunately this is very difficult to test with two sticks, so there's no guarantee that this is the issue. You may just have to buy some new memory.
Relevancy 22.36%

Hi, I just got rid of Win7 32 bit and installed 64 bit, but I screwed up the partition when I was doing the clean install. Right now I have:
Disk 0 74.5GB Online
System Reserved is at 100MB
(C 14.9 GB
Unallocated 59.5 GB

Is there a way that I can remove the partitions all together? I am in the Disk Management in Admin Tools, but unsure of what to do at this point. Any help is greatly appreciated......

A:Just installed Win7 64-bit and screwed up the partitions...

Nevermind..... Figured it out.
Relevancy 24.51%

Hello In a previous thread I said I would format reinstall windows and reinstall drivers all of which achieved absolutely nothing I still get low fps in games split second freezes etc Now the main problem that concerns me is the constant low fps I play all games at a mere resolution of x and even on such a low resolution which my rig should easily hand oh right here are the specs CPU I- without the k Ghz GPU ASUS GTX low Low games GPU/CPU fps with in usage direct cu II overclocked to Mhz Motherboard Intel DH CL RAM APACER GB DDR Mhz PSU Watts thermaltake toughpower Plus certfied good quality Now with this card and at a mere resolution of x almost any game made after gives an agonizingly low fps even with an overclocked GTX and this is always accompanied by low CPU and or GPU usage as far as I can tell anyway It might also be useful to mention that my monitor s max resolution is x I play every game at max settings of course Examples Of course a picture is worth a thousand words Starcraft a very CPU intensive RTS game Here is the common Starcraft map that many Starcraft players are familiar with it s a blank map with Low fps in games with low GPU/CPU usage carriers and Battlecruisers you can see the low framerate in the top left corner Now the CPU usage during this scene a special thank you to Bill Gates for providing this vague Low fps in games with low GPU/CPU usage graph that I Low fps in games with low GPU/CPU usage can understand nothing from So is this the CPU usage starcraft is supposed to have And as you would expect the GPU usage is very low even when all settings are maxed out as this is not a very GPU intensive game And another note fps drops happen in the Starcraft campaign mode regularly I mean it actually drops to fps in the single player campaign I m just gonna sum up the rest so as not to make this thread too long for you to read in Amnesia The Dark Descent a first person GPU intensive game I get an average fps of fps and it most often dips to fps except when looking at the ceiling The GPU usage in this game maxes out at and sometimes won t go above even when framerate is fps And in Rome Total war a CPU intensive RTS game framerate in the single player campaign battle mode drops regularly to fps whereas on my laptop with integrated graphics the framerate never drops to below fps in the campaign And there is something important I failed to mention above I m running at a resolution of x Is this a hardware problem It might be I don t know But strangely here is the GPU usage after a furmark benchmark test Also the CPU can max out all cores at a constant using prime a CPU stress test And when I run DMark another benchmarking software I get maximum CPU usage hovering at on all cores and an acceptable GPU usage that hovers between and and these percentages include the DMark combined CPU and GPU test Here is the DMark score http dmark com dm It seems that only benchmarking programs and stress tests can make full use of the hardware PS A joke The friend who helped me buy the PC said I was so stupid to get such a small monitor with a mere resolution of x if I was getting such a powerful Graphics card with it He said on such a resolution the GTX was overkill I ve searched the internet for people with the same issue and on all the forums I read I never found a single solution all the answers that are ever given to this problem are the usual default answers quot update your drivers quot quot check your temps quot etc etc nbsp

A:Low fps in games with low GPU/CPU usage

Just what exactly do I have to do to get an answer around here?

Edit: Note: If you feel you know the answer to the primary question, please answer that question and not this one. Just taking precautions here.
Relevancy 22.36%

I just bought the subject laptop, and have no interest in Win8. This laptop will eventually backup an HP2000-100 that the MB no longer recognizes the battery(?another story). The plan is to install the HD from the -100 into 2B00, so far so good. I've been able to boot Win7. On the first boot try I got a message that HD didn't exist, a message to run diagnostics. Ran diagnostics everything passed, except the battery check(? another story). Had to go into the BIOS and enable the Legacy mode. Success Win7 booted with expected anomalies, video, sound, etc., etc.. I just finished downloading from HP the drivers for an HP2000z-300, 160mb. The -300 is the last laptop in the HP2000 series to come with Win7. I'll let you know the results in the morn.


A:New HP2000z-2B00 downgrade to Win7

The graphics driver has installed and appears to be working. The WiFi, and audio did not install, but the old drivers seem to be working. I'll pursue those further if I have problems.

Relevancy 41.71%

I have an Gigabyte Radeon HD7770 1GB card. It works just fine, but I have noticed an issue where memory size detected differs from the actual size.
For example dxdiag (both32 and 64bit) detects only 700MB. So does Can You run it (from time to time).
I did validation with GPU-z and it does show proper size at 1GB:

I am wondering whether this might be due to a faulty card or (crossed fingers) nothing to worry about. I love this card and it would, obviously, really blow if it's defective.

Almost forgot to add that I am, currently, running on Windows 7 64Bit Home Premium. Windows 8 Pro 64Bit show the card as having 768MB of memory.


A:Incorrect memory size

If it works, don't worry about the detected memory difference
Relevancy 42.14%

I have an older 1GB p.c. I want to add 1G.B. to it. I located the correct part but my question is,,is this a simple process ? or should I have a pro do it? thanx

A:Adding memory

Here's one of the many videos on installing RAM. It is fairly straight forward. Module is notched in such a way that it will only fit in the slot one way. Depends on how cluttered it is inside the case, you might need to disconnect some cables/wires to do the install. I'd also get a can a compressed air and blow out the dust if it's dusty inside.
Relevancy 40.85%

I have a nvidia geforce2 mx/mx 400 128MB VGA card. when I turn on computer today, VGA memory is displayed as 64MB instead of 128MB.

what could be the issue ?

A:Nvidia GeForce2 MX/MX 400 not showing actual memory

I can't say what the issue is but thats an old card and could be experiencing issues from aging.
Relevancy 24.08%

I have an unknown icon between my pc and router in my network map. It is a secure net work. Also, I hear other people's conversation, music, background noise like someone is connected to me computer remotely. Someone please help it's freaking me out!!!

A:Unknown connector between my PC and router

Unplug your computer from your router at your computer's network card. Do you still hear the conversations, music, background noise? Or do you have a wireless network card and that's why you included the word secure?
Relevancy 19.35%

I Win7(64) no "color scan" with Omnipage17 option see Mailpup or moved me to hardware I doubt this is a hardware issue As indicated below all worked properly under XPSP It is only under Win that this issue has cropped up So I am not sure if this is the best place In short Omnipage is not communicating properly with my Win7(64) no "color scan" option with Omnipage17 Mustek A scanner on a Win system There were no issues with this software and scanner running on xpsp Not sure what I could be missing Any help appreciated Thanks Longer Description Wondering how to get color capability with OP on my Win system Currently all I can get are B amp W and Grayscale for my scan options All scanner quot sizes quot B -A letter and legal are available in the Tools- gt Options - gt Scanner toolbox and they work properly So OP is partially working with the scanner NOTE OP was working properly fully with this scanner on my old xpsp system System Information Omnipage Professional version Product ID OP- - - OS Win Computer Dell Vostro i processor Scanner Mustek SE A USB Pro What I have done Downloaded the lasted drivers ScanExpress A USB WIN zip from Mustek Uninstalled the old driver installation from Device Manager Reboot Reinstall Mustek software Reboot Open Omnipage - gt Tools - gt Options - gt Scanner - gt Setup Download Latest Scanner Database from Nuance Select amp Test Scanner TWAIN SE A USB Pro - gt Next Would you still like to test your device - gt Yes The scanner is already in the database Would you still like to test your device - gt Yes Close any other applications that might be using your scanner - gt Next After running all available tests Omnipage still cannot see the scanner s color capability Testing the Scanner from Control Panel - gt Devices amp Printers - gt Scanner Select Right Click for Properties - gt Diagnostics - gt Test Scanner quot Successfully completed the diagnostic test quot Testing by Control Panel - gt Devices amp Printers - gt Scanner Select Right Click for Properties - gt Start Scan Here the quot Color quot Option is available And it successfully creates a color scan I found no help on this topic at Nuance Either Knowledge base or Forums Google coming up dry too Not sure what I could be missing Any help appreciated Thanks nbsp

A:Win7(64) no "color scan" option with Omnipage17

Typically this is a driver problem. find the driver from the print/scanner manufacturer and dl/install it.
Relevancy 42.57%

The GPU (dual, actually) I'm getting is an ATI Radeon 3870 X2 1GB. My current GPU is a classic NVIDIA GeForce2 MX/MX 400. The processor I'm getting is an AMD Phenom II X4 3.4GHz 965. My current is an AMD Sempron (something something). The memory is two 4GB Corsair Vengeance RAM cards. My memory is at 640MB (I know, it's pathetic.) currently.

A:GPU, CPU, or memory first?

Go for your memory first. Your over all performance on you stuff now will improve.
Relevancy 24.94%

I have no idea what is going on with my old laptop... but its ram usage keeps going to 80%+ while simply idling. It has 4 gigs of ram and nothing else is running other than MSN. I thought it was an overheating issue. Its not, I have a room fan under it cooling it. I thought the RAM was corrupted... Its not, put it in another computer and it ran until the harddrive ended up crashing.

My brother has to use the spare and I need to fix it since his computer was the one crashing <3 Please help.
This computer cannot stay on for long virus scans and malware scans may be out of the question.

He was able to run Dungeon Fighter last night without having any real issues... The ram usage stayed at 45 - 50% (The game is hard on the RAM)

Could there be something wrong with the system idling?

A:RAM usage goes to 80%

It seems to do it every 6 hours... ON THE HOUR. Is there a virus that expands from 1 - 1 million K in 6 hours?
Relevancy 24.08%

I have a Dell Inspiron I want to put a new wireless card in...
Since the driver wants to fail all the time. It's brand new and not even paid for fully yet. The wifi card doesn't wanna stay connected and disconnects from the internet quite a lot.
The wireless card I have is, well, I pulled it out of a toshiba and It doesn't help if I search the internet for the card.

The card has on it: ICASA TA-2008/567
Toshiba Gcode: G86C0004510

The words on the card look like they are in french. Any help?

realtek owns it... Know where to get a driver that's a trusted source?

A:Unknown wireless card

Well in regards to a "trusted source" that you might secure the driver for a "RTL8187B", give the following source a try! I've been using C|Net for years, they almost have never let me down!

Realtek RTL8187B Wireless 802.11b/g 54Mbps USB 2.0 Network Adapter Driver​​

Good luck to you, I think this one is going to work out for you!
Relevancy 41.71%

Hewlett Packard
Compaq Presario SR 1000 SR1639UK
Product EK350AA-ABU
Microsoft Window XP
Home Edition
Version 2002, Service Pack 3
2.19Ghz, 1.00GB of RAM

ACPI Uniprocessor PC
AMD Athlon ? 64 Processor 3700+
NVIDIA GeForce 6200SE TurboCache?

Hello, I wish to upgrade my PC with more RAM. Understand that upgrading RAM is easy.
Can any one guide me on how to carry this out.
Is it worth it considering the make and model??

A:Advise regarding installing more memory

Windows XP Home SP3 on a single core 2.2Ghz processor should run fine on 1GB of memory. Considering the cost of "DDR400 PC3200" I wouldn't upgrade, unless you absolutely needed more memory for a specific reason.
Relevancy 61.49%

My windows xp 64 bit runs super slow after windows loading sign and it takes me 2 hrs to open up the desktop and transfer 6 images. I use 2 RAM's of 2gb (kingston DDR2). When I opened up BIOS, it showed 640k as base memory and 126m as extended memory.
There are no details under the computer title if I try to check the properties of computer or maybe it is just taking too much time to display. the desktop is fine, my computer still works but takes hours to do a simple task. it all started all of a sudden. Also I would like to know if 'unganged mode' is fine as it is displayed when the system boots. I tried to check another different RAM on the computer, but still no change, so I am confused regarding the problem.
Relevancy 24.51%

I have one ISP to which I connect via the Ethernet card and an ADSL modem.
Netmeter does a good job of showing the upload & download speeds, and the upload & download usage.
I am planning to use a usb dongle from another ISP, on the same PC.
Is there any way I can monitor their usage separately?

A:Monitoring usage of two different ISPs on the same PC

Regarding the issue of monitoring two different ISPs, rather than experiment, I've taken the easy way out.

While a single instance of Networx does provide statistics for the two different ISPs, I do not know whether it can provide all the usage stats separately for both ISPs.

I have gone for two instances of monitoring software.

For both ISPs, I have to use "All Dial-Up Connections", so I can't have both instances of Networx/Netmeter running at the same time.

Each portable version must be kept in a separate folder and fired up before connecting to the internet.

Another method is to use two different monitoring softwares, but again only one should be running at a time.
Relevancy 24.51%


My Win Vista machine seems to add or delete up to 1Gb of data on a daily basis. I have two 50G hard drives and it is the C: drive (the main one for the PC) that is displaying this activity. I basically use the PC to check personal emails and little else, so I am surprised by the disk memory changes each day. Is there a way for me to see what files are changing or being added or deleted from the disk on a daily basis? I tried to see this with Windows Explorer, but it does not show any large files with recent edit dates. So, I am thinking that there must be a better way.

Thanks for your help with this.
Relevancy 41.71%

My system is one month old, or something. I assembled it together with a friend. Since 1st day, CPU-Z does not report dual channel with my DDR3 Corsair Vengeance LP CML8GX3M2A1333C9 8GB ( 2X4GB ) 1333MHz. The sticks are in the slots the mobo manual recommends (A2 B2).

In the BIOS, I could not find the information if they're in single or dual channel.

My chipset and mobo drivers are all up to date.

Edit: Solved (by myself) . All I had to do was uninstall an re-install a newer version of cpu-z. I'm a hero.
Relevancy 41.28%


I am trying to recover my files-all.

Recently all the folders and files disappeared, normally when this happened i would view all the hidden files in the folder options and also unchecked the hide protected operating....

and i would see the hidden files.. now only thing i see is a folder marked playlist (guessing since it was in ma phone that's apart of the reason),

however if i delete it it comes back my guess is its a virus, i know my folders are still on it cause the space is allocated in the properties box so its there... i also tried the command line (attrib -s -.......and so on) but nothing worked, i only see the same playlist folder..

i don't want to buy one of those recovery software cause its costy and i might not use it frequently..

A:Recover files from memory card

This might help:
Relevancy 40.42%

I want to change the drive letter of my memory card, which shows up and is usable from My Computer but is not listed on disk management. I'm running Windows XP SP3 on a dell vostro 1400. Is there any reason for this? The card is a Canon SD Memory Card SDC-16M

A:Disk management does not list my 16MB memory card

Put in a memory card that the computer DOES see in disk management, change the drive letter, then put in other card & see if the computer can see it then. I really don't think changing drive letters is going to allow you to see a memory card, most likely it's dead, but it's worth a shot. Hope this helps, take care!
Relevancy 42.14%

I am unsure of what memory to get if I upgraded my PC. See attached for pc specs.

A:Possible memory upgrade

Sworth said:

I am unsure of what memory to get if I upgraded my PC. See attached for pc specs.Click to expand...

If you're talking about RAM, go here
it'll tell you everything you need to know.
Relevancy 24.08%

A friend of mine bought an airtel Huawei EG162G usb stick modem after using it for some months he came to me to report that the modem isnt browsing even though it is connected and the data plan is active. I checked evrything, the only thing I noticed in the diagnostic information is that the MSISDN number is not displayed insted it is displaying unknown.
I have tried to change the firmware by upgrading even downgrading but not working. I even unlocked it so that I would be able to use other types of sim, it's still the same thing. I need someone to put me through on this

Any help will be appreciated
Relevancy 42.14%

hello pro's

I had a prob. lately my physical memory when opening task manager dow its 26% any way to increase it???

note :::: when I play assassins creed ravolaitions it jumps up to 60% or even 80%

A:My physical memory too low

Please post specs to your system. Download speccy at: then save as txt & attach to this thread. Post back!
Relevancy 41.71%

Hi everyone, I have a Lenovo T61 laptop with 1GB of RAM.
I'm looking to upgrade this to 2GB or 4GB as I am running windows Vista on it.

I believe that it has 2 DDR-2 667 RAM slots, becaus CPUz says that it's running in dual channel mode but I'm not sure, and don't know how to find out.

Thanks for reading

A:Memory upgrade for Lenovo T61

Have you tried the Crucial website? That will generally tell you.
Relevancy 40.42%

My I drive is reading: not accessible incorrect function. Please help

A:SD memory card not reading, usually open I drive to view

See if this might help How to Cleanup and Remove old USB Storage Drivers
Relevancy 23.65%

This heavy usage connection Losing Internet under just recently started happening to Losing Internet connection under heavy usage me while I was house-sitting for my sister and using one of her neighbor s open connections Now anytime I play Losing Internet connection under heavy usage a game online League of Legends Dota or do something like bit-torrent I will lose my internet connection for a minute or two then it will come back up What s scary is that when I came back home it s continuing still I even just upgraded my internet But the strange part is my other computer in the house isn t losing it s connection So it doesn t seem like the modem or the router is the issue I ve tried a lot of the usual solutions I ve tried hardlined in wireless both just wireless checked all of the ports on the router Nothing seems to be working So my question is is there some sort of virus I could have picked up on that open network I wasn t doing much other than playing games and watching some live game streams I ve scanned my computer multiple times with Avast and The Cleaner This has been going on for almost a week now and it s getting on my last nerve Can t finish a game without being disconnected - times Any suggestions or help would be greatly appreciated let me know if there s more info needed nbsp

A:Losing Internet connection under heavy usage

Sounds like you may have a bug. Boot to safe mode & surf the internet/watch a movie trailer, see if your connection gets dropped. I realize you cannot play a game in safe mode, but the streaming movie trailer should be long enough to test to see if the connection gets dropped. If it doesn't drop in safe mode - that's good. It's a windows issue in normal mode, which may mean you have some kinda bug. Post back. Thanks!
Relevancy 41.71%

Hi, I order two sets of memory sticks both 2 GBs. here they are
1st one I bought:

and 2nd

here is what I am staring it

What do you guys say is everything working fine?

A:Memory correct or incorrect?

I'm slightly confused. You said your purchased two sets but yet the second purchase appears to be a single module. Even in the screenshot the module size is 2GB.

What exactly is the question?

Are you are questioning the frequency of 400MHz?
If so, that is normal. DDR stand for Double Data Rate, DDR2-800 would be Double Data Rate of 400MHz which is 800MHz.
Relevancy 41.71%

Hi, I have an old slow pc which had only 256MB of SDRAM installed, so to speed it up I decided to up the memory with a1GB stick of DDR memory. The mobo, a ECS K7AMA has 4 slots, 2 for SDRAM and 2 for DDR ram. I removed the sdram beore I installed the DDR ram, I changed the jumpers as necessary but the system seems to think there is only 32MB installed which makes for a very slow pc, running XP. I have tried both slots but it makes no difference.
I I revert back to the SDRAM, changng jumpers that is recognised fine.The memory is from Crucial and is the type recommended by them on their website.
Any suggestions as to where I may be going wrong?

A:Memory not recognized correctly

The motherboard may only recognize 2-512MB DDR modules or even just 2-256MB DDR modules