Windows Support Forum

Lockup after install of build 7077

Q: Lockup after install of build 7077

hello all , my system specs are

ECS Geforce 6100SM-M2 Mainboard
2GB DDR2-667 Ram
Geforce 9500GTS PCI-e video card
Using spare 40GB IDE hdd
CD-RW/DVD-+ RW DL burner
450 Watt PSU
2.5GHZ AMD Athlon 64X2 4800 Dualcore

it seems to be random but its not power settinsg as i tried setting Power management to S1 , S3 and S1&S3

i even enabled HPET i wasnt having a problem with any of teh prebeta, beta and beta 2 builds. i'm using a legitimate copy as well as CD-ket strait off an MSDN account (thank to my friend Xion)

since i cant fully test out build 7077 i'm not going to dualboot it using my main hard drive untill i know how far 7077 is compared to what i last used (7000)

Relevancy 100%
Preferred Solution: Lockup after install of build 7077

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Lockup after install of build 7077

Clean install? Upgrade?

http://www.sevenforums.com/installation-setup/7643-lockup-after-install-build-7077-a.html
Relevancy 83.85%

Hey guys,

I've used Win7 as my main OS since I installed 7077 but I figure now's time to upgrade to a newer build. I have 7127, 7201 and 7229 all 64 bit editions. Couple questions. Should I download 7137? Is it worth it? Which build of the following three listed above would you choose? My specs are

Dell Studio 1735
4GB Ram
Core 2 Duo T5750 2.00GHz
Intel 965GM Graphics
IDT High Def Audio

Replies are gratefully appreciated!

A:Upgrading from 7077, which build to install?

go with 7229 ... if you need links PM me i got both x32 and x64 and on 4 host sites that are interchangeable links

http://www.sevenforums.com/general-discussion/13130-upgrading-7077-build-install.html
Relevancy 83.85%

So, I've been using Build 7000 but went back to Vista x64 because my surround sound didn't work. You think the 7077 build will fix that? It's the onboard 5.1 surround sound (asus board). Also, should I wait for the official RC or just suck it up and deal with the surround sound issue in 7000 or 7077?

Now, what should I do once I install either build? I'm just so bored right now that all the fun is gone after it's installed. Any suggestions on what to do in Windows 7?

A:Should I install Build 7077 or 7000?

Wait for the public release of the RC - release candidate version. It's only a few weeks away.

http://www.sevenforums.com/general-discussion/6988-should-i-install-build-7077-7000-a.html
Relevancy 82.13%

So, fresh install and build 7077 is super slow. I mean it shouldn't be this slow at least I don't think so.

It always takes 10-15 seconds to open up menus and things and the CPU is constantly at 30-50% load and RAM always at 25% according to the cpu/ram % gadget.

Any ideas?

A:Fresh install, build 7077 is super slow -_-

  
Quote: Originally Posted by Bryce


So, fresh install and build 7077 is super slow. I mean it shouldn't be this slow at least I don't think so.

It always takes 10-15 seconds to open up menus and things and the CPU is constantly at 30-50% load and RAM always at 25% according to the cpu/ram % gadget.

Any ideas?


Perhaps the build you picked up has a malware payload attached to it.

http://www.sevenforums.com/performance-maintenance/7411-fresh-install-build-7077-super-slow-_.html
Relevancy 79.55%

Hi all Just a couple of points Both x- bit versions W build -- OK W build -- few glitches install had to Vs 7077 Build x-64 better 7077 anyone. 7100 for me uninstall some pre-existing drivers on quot Upgrade quot before it would install -- and you've guessed it -- couldn't re-install the drivers again On quot New install quot drivers wouldn't install in Build 7100 Vs 7077 x-64 anyone. 7077 better for me any way --even in compatability mode some rd party apps ran fine in build but quot Crap out quot in NET is totally hosed and bollixed up in -- hopefully this will be fixed by RTM Cannot install ANY Net apps -- worked fine in rd party TV application doesn't run AT all in -- I NEED this for viewing composite video -- WMC is fine for normal TV viewing Performance wise both builds seem OK However if this is RC Build 7100 Vs 7077 x-64 anyone. 7077 better for me it seems a couple of steps backwards from build as far as installability and compatability are concerned I'll leave it for a little while longer but my gut feel currently is to revert back to build until some fixes or quot Service packs quot come out Cheers jimbo

A:Build 7100 Vs 7077 x-64 anyone. 7077 better for me

cllean install?

http://www.sevenforums.com/general-discussion/8058-build-7100-vs-7077-x-64-anyone-7077-better-me.html
Relevancy 68.8%

  
Quote: Originally Posted by torrentg


......
Every time there is a leak, it is always both x86 and x86-64. ...........



Where's build 7077 X-64 -- not a sliver of a hint "on the usual places" yet.

Cheers
jimbo

A:Where's build 7077 X-64

I think they meant in the end, so far i think there have been leaks of both for each build.

http://www.sevenforums.com/general-discussion/6789-wheres-build-7077-x-64-a.html
Relevancy 68.8%

Did anyone have major problems with build 7077? For me it was so bad, that I had to put vista back on the machine. I never had any major problems with build 7000. 7077 had nice features, but none of my movies would play or for that matter even be recognized as movie files. Most of my software didn't work right, but the graphics problems that 7000 had were gone in 7077. Don't get me wrong, I did like what I saw in 7077, but until at least RC1 comes out, I will be using vista 'til then. I just hope 7077 isn't a preview of the RC. It's funny though that vista has been out for how long now and I just found a bug in the x64 version that M$ say they are going to make a patch for in an upcoming update. We will have to wait and see about that one.

A:Build 7077 x64

It was fine for me. Did you upgrade install by any chance?

http://www.sevenforums.com/general-discussion/8175-build-7077-x64.html
Relevancy 67.94%

I have installed on my notebook the W7 build 7077...
It works fine in the first week, I was really liking it (I still like... but not so much).
Now, the problems decided to come...
When I type my password, many times the computer don't leave that "WELCOME" part... others, the screen gets all black with the signature "Windows 7 build 7077" written on the right corner...
I thought it was a problem with my notebook, with the DigitalPersona driver, but I disabled and the problem persists, I uninstalled, and the problem still with me
When I start the computer on SAFE MODE, it goes perfectly, but when I start it on the 'normally' mode, it really kills me...

Anybody can help me?

sorry about my english... many years with any study on it =x

A:Problems with build 7077

I forgot.
There is a problem with my START MENU too...
Here is the screen shot...

http://www.sevenforums.com/general-discussion/8046-problems-build-7077-a.html
Relevancy 67.94%

Does anyone know the expiration date of W7 build 7077? Is it the same for both x86 and x64?

A:Build 7077 Expiration

click on run in the start menu and type in winver and that will show you a date that it will be nuked.

http://www.sevenforums.com/general-discussion/7292-build-7077-expiration.html
Relevancy 67.94%

I only recently downloaded, and installed Build 7068. I have very limited download and upload speeds and my bandwidth is limited. Is there anything that is really worth it so much that I should download 7077 (besides that it is an RC build)?

A:Build 7077 - Should I download it?

HI Termana ,Not that I have noticed,but then again it may have fixed a lot of issues, that I didn't have in the first place.Purely up to you.

http://www.sevenforums.com/general-discussion/6697-build-7077-should-i-download.html
Relevancy 67.94%

The last problem I have if you remember was the motherboard was 'dead'. No power to USB devices, monitors, etc. Well, now it's happened again. I didn't even overclock it after I reset the CMOS battery. Any idea why it happened this time

A:Problem with build 7077 again :(

I had to reset my CMOS battery yet again -_-

http://www.sevenforums.com/general-discussion/7535-problem-build-7077-again.html
Relevancy 67.94%

Hi all Hapy Easter etc Although I wasn't going to I couldn't resisit the temptation - downloaded build X- thanks to Soligor and his Russian contacts Download fine -- mins approx -- plenty of seeders now Noticed though on Network Discovery I randomly See XP machines on the network but randomly don't see them either -- seems to be totally unpredictable when the machines are visible These machines are logged on However there's absolutely no problem in quot Manually connecting quot using connect network drive and then specifying the actual UNC address such as via xpmachine name share name Of course you have to know the share names if you connect like this If you don't know the share name then you are totally screwed Doesn't matter whether Firewalls or on or off - same problem Weird Machine is fine in build x- All networked XP machines always available Looks like these later builds are doing things with Networks Cheers jimbo

A:Network Bug(? maybe) in build 7077 X-64

I have the same thing going on Jimbo.....I have 7077 x86 on one machine and 7077 x64 on another. I also have XP on the 32bit machine and am now noticing the same thing. 7068 worked fine but 7077 is not working automatically. I wonder if it is a bug? I just got it installed (the x64) and had to come to work. Let me know if you find a fix later in the day.

http://www.sevenforums.com/network-sharing/6845-network-bug-maybe-build-7077-x-64-a.html
Relevancy 67.94%

My father patched the TCPIP.SYS file and it got corrupted, the file is in Windows/system32/drivers

Could somebody who has installed build 7077 please email the file to me at
m a x w e l l AT s k i l l f u l g r a p h i x DOT c o m (remove spaces and CHANGE to Symbol),
so we do not have to do a fresh install.

It may be best to .zip or .rar it

Thank you

Responders will get rep

A:Please Help! Need Build 7077 File

Please do not post Email links on this Forum for security reasons.
Try opening the Elevated Command prompt and type scf /scannow and hopefully that will fix it.

http://www.sevenforums.com/general-discussion/6746-please-help-need-build-7077-file.html
Relevancy 67.94%

I'm going to install 7, but I was kinda waiting for the RC. I don't know if build 7077 is RC or not, so if you guys know, that would be good... Also, is it good? I mean, does it have good performance and stability? And is it buggy?

A:So is build 7077 RC and is it good?

Reading around the forums will get you the answers that your searching for. In short I don't know whether it will be the rc but very much doubt it. As for stability and performance it is spot on in both departments. Just look around the forums like I say and you will get all the answers and more.

http://www.sevenforums.com/general-discussion/6855-so-build-7077-rc-good.html
Relevancy 67.94%

Hi all
I installed Adobe reader 9.1 on W7 build 7077 X-64.

IE8 (32 bit) however doesn't automatically open PDF files any more -- no problem with downloading the document and manually opening it.

Cheers
jimbo

A:Adobe 9.1 and IE8 on X-64 build 7077

Have you run the Updater?

http://www.sevenforums.com/network-sharing/7430-adobe-9-1-ie8-x-64-build-7077-a.html
Relevancy 67.08%

Hi,

In Windows, I only have limited screensavers. Is there a way to activate them all?

P.S. Screenshot attatched of what I mean...

A:No Screensavers in Windows 7 build 7077?

Didn't even look til you mentioned it but I do have one from Avast! :P

http://www.sevenforums.com/customization/7143-no-screensavers-windows-7-build-7077-a.html
Relevancy 67.08%

When upgrading from 7048 to 7077 the installer freezes on the last step (copying files and settings) at 35% every time I've tried it. It suggested removing ATI Catalyst Install Manager and Control Panel, which I did, but it still hangs (although this time at 47%). I have tried several different configurations (with/without CCC and Install Manager, do/don't go online for updates, etc). Every time I have to force restart the computer and it will begin to restore the previous version.

My system specs are as follows:
AMD Phenom X4 9850
SAPPHIRE Radeon HD4830
Kingston HyperX 2x2GB Dual channel RAM
MSI K9A2-VM Motherboard
Western Digital Caviar Blue 500GB + Seagate Barracuda 640GB (installing onto the Seagate)
ASUS DVD drive

Any help is appreciated. Thanks!

A:Build 7077 upgrade freeze

What speed did you burn the DVD at? Because the Install.wmi file is rather large, a fast burn speed may produce read errors that can only be notice upon usage. I suggest 2/4x speed to greatly reduce the risk of write errors.

http://www.sevenforums.com/installation-setup/8360-build-7077-upgrade-freeze.html
Relevancy 67.08%

Hi Build - Padlocked Folder 7077 guys Got a question noticed that of my folders in an external HDD had padlocks on them I had performed a clean installation of yesterday and after installation I don't remember seeing them there Suspected that it probably was an ownership thing as mentioned here Hard disk Icons -- Sahred Disks confusing Build 7077 - Padlocked Folder with Padlock Item So I actually changed Build 7077 - Padlocked Folder the ownership of the folders to me for some reason it was set to be owned by the Administrators group but the folder remains padlocked Any idea why this is the case What makes this folders different from the rest in the screenshot above is that I actually added these folders to part of the library and messed around with Homegroup so not sure if that caused the padlocks I've since removed myself from the Homegroup and even attempted to remove them from the library but still can't seem to get rid of the padlock Any one else here facing a similar situation Thanks

A:Build 7077 - Padlocked Folder

Also noticed that my user folder in C:\Users is also padlocked

http://www.sevenforums.com/general-discussion/6929-build-7077-padlocked-folder.html
Relevancy 67.08%

Hi.I have installed my current Se7en approximately 4 month ago and it still hasnt given me a single serious error.Now i'm thinking of reinstalling it to 7600, but i have doubts.So tell me please is it worth of it?Will the system run faster?Are there some new addons?

A:Build 7077 versus 7600

The build you are using will expire. If you purchase a copy, you can use it forever.
No, you will probably not notice a big difference between the RC and RTM versions.

http://www.sevenforums.com/general-discussion/34059-build-7077-versus-7600-a.html
Relevancy 67.08%

My first post on here, have been reading plenty though

I installed build 7077 hoping to be rid of the intel graphics adaptor crash when waking up from a blank screen, build 7068 also suffered with this, and now this new build also does it.

And also my newsleecher no longer runs now, has worked fine on all the other builds.

I get this error "an internal exception occured"

Just hope this does'nt become the RC build, as things are breaking that were fine in builds 7000 and 7057.

A:Windows 7 build 7077 bugs

Wish I could help but on a AMD setup .Dont think this will be the RC build so can only hope things pan out down the line

http://www.sevenforums.com/general-discussion/6729-windows-7-build-7077-bugs.html
Relevancy 66.22%

I upgraded (not a clean install) to 7077 today from 7048. I reinstalled the latest Realtek Driver, and my sound is staticy on files played from WMP 12.
I had this issue before on both an upgrade and clean install of 7057, which is why I went back to 7048 among other reasons.

Anybody have a tip, trick, or fix for this? I have tried different sound settings, some are worse than others, but there is static or skipping sound in all media files.

Thanks in advance!

A:Upgraded to Build 7077 - Staticy Sound now

Not a good move to upgrade. These builds are not designed for upgrades and so will not remove the previous files completely.
I recommend you clean install.

http://www.sevenforums.com/sound-audio/7316-upgraded-build-7077-staticy-sound-now.html
Relevancy 66.22%

Hi all I've been using seven bit version for quite a while now 7077 Build login stuck @ screen! on my laptop MSI GX PX - amd turion x ati hd MB GB gigs of ram The first installation did the problem mentioned in the title of the topic after i installed Kerio personal firewall - i didn't know what to do so i just reinstalled windows But now it happened again The comp was running for days i turned it off around am then turned it on at am - for the first time i could login and i even see the taskbar and the background but the icons never showed i couldn't click anything on the taskbar either ctrl alt del did nothing so i had to restart it manually The login screen showed up i entered my password but it never made it to the desktop it just got stuck like that the HDD wasn't spinning or anything Build 7077 stuck @ login screen! - restart - in safe mode it boots up normally so i uninstalled a few recently installed Build 7077 stuck @ login screen! programs mkvtoolnix and alike but after restarting it got stuck at Build 7077 stuck @ login screen! the login screen again Now normally i would just reinstall windows but after two months it has too many programs - lot of time to install them again So i thought i'll ask here for help The notebook has XP as it's main OS seven is installed on a virtual harddrive gigs Thank's for any kind of help in advance

A:Build 7077 stuck @ login screen!

Hi there
I can't give you a reason as to the error but this might work.

Try starting Windows in SAFE MODE as you've done but disable Networking and then shutting down. This should clear out any "Stuck" services. Switch off Firewall and uninstall any AV software whilst in SAFE MODE.

Incidentally while you are logged on in save mode see what starts automatically and stop those you don't need -- there are posts around suggesting what you can stop running automatically.

When you try again in "Normal mode" start DISCONNECTED from any network and switch your wireless card off.

Cheers
jimbo

http://www.sevenforums.com/general-discussion/7559-build-7077-stuck-login-screen.html
Relevancy 66.22%

Whenever I delete the recycle bin, the "full" trash icon never goes back to "empty." If I restart it will come back as empty. But once it fills up again, it does the same thing. Only a restart makes it empty. Tried turning the icon on and off, didn't help.

At first I thought - who cares, RC is around the corner. But now it's become one of those dumb little things that bugs the hell out of me. Any ideas?

thanks

A:broken recycle bin icon - 7077 build

Are you using custom icons on the recycle bin? If so then I have no solution other then using the default one, if you are using the default one then there is a tutorial on how to restore it here, Recycle Bin - Vista Forums

http://www.sevenforums.com/general-discussion/7703-broken-recycle-bin-icon-7077-build.html
Relevancy 66.22%

Have done an upgrade from Vista Ultimate x86 to Win 7 7077 x86. Absolutely no problems, went as smooth as can be.

Increased speed, even though there is only 2GB RAM and 160GB hdd. Vista felt sluggish and slow. It has now grown wings.

A:Upgraded Vista to Windows 7 build 7077 x86

I didn't have much of a problem with Vista's speed with 2GB of RAM. Though I have Home Premium and not Ultimate. Either way each build of 7 that I've used are noticeably better than Vista's speed.

http://www.sevenforums.com/installation-setup/6937-upgraded-vista-windows-7-build-7077-x86.html
Relevancy 66.22%

i've got windows 7 ultimate build 7077 and i am not sure about it

should i install it ( is it a good version?? )

A:i've got windows 7 ultimate build 7077 is it good ?

can some one help me

http://www.sevenforums.com/general-discussion/232874-ive-got-windows-7-ultimate-build-7077-good.html
Relevancy 65.79%

Well, 7077 build works perfectly and even my surround sound. It was a stupid error on my part . I forgot to select the 5.1 surround sound option in the Control Panel lols.

A:Well Build 7077 works perfectly and my surround sound!!

So, it might have worked in previous builds?

http://www.sevenforums.com/sound-audio/7270-well-build-7077-works-perfectly-my-surround-sound.html
Relevancy 65.79%

Hi there
I can't believe this
a smallish file gave me message "About 22 Hours remaining" on a simple copy (300 MB file)

It completed of course in a few seconds but how is explorer calculating this value.

Maybe the computer thought I was using Paper Tape instead of Fast LOCAL SATA disks. (Not even across a Network, or external USB drives).

Cheers

jimbo

A:Explorer copy times exaggerated (X-64 build 7077)

Try replicating the issue. Could be a miscalculation, or maybe the calculation was took when the drive(s) were in use.

http://www.sevenforums.com/general-discussion/7565-explorer-copy-times-exaggerated-x-64-build-7077-a.html
Relevancy 65.79%

ok as stated for some reason when i did an upgrade from 7077 to 7100, my grub menu's completely gone no more is it there. I know that partition's there it's just for some reason 7 decided to say oh no no more will you have the option to boot to linux probably a plan by M$ to screw over people who jsut want to do an "upgrade" into doing more work but oh well. So what's the plan now? Do i have to do a complete reinstall of ubuntu to get my grub back or is there a simpler fix?

A:7 build 7100 messed up grub upgraded from 7077

Simple fix add it too the bcd, i recommend EasyBCD
or VistaBootPRO - Dual Boot Windows XP or Vista with Windows 7

Easy bcd site is having difficulty's you can download here Download EasyBCD 1.7.2 - An advanced GUI application that makes it easy to modify the Windows Vista bootloader and the entries in it - Softpedia

Edit: EasyBCD site now working.

http://www.sevenforums.com/installation-setup/8135-7-build-7100-messed-up-grub-upgraded-7077-a.html
Relevancy 60.63%

i downloaded the x64 7077 and want to install it on 32-bit XP...i opened the ISO file and put everything in the bootable flash drive, and then changed the BIOS to boot from USB...however, that didn't work...the computer is 64-bit capable as it has 4gm ram and AMD Phenom Quad processor...when I opened the folder inside the flash drive and double clicked on setup.exe, it says it can't open the 64-bit

so is there anything i need to do or am i doing something wrong that's preventing me from installing the 64 bit?

thanks

A:Install 7077 x64 on XP 32-bit

  
Quote: Originally Posted by jblazea50


...
so is there anything i need to do or am i doing something wrong that's preventing me from installing the 64 bit?

thanks
...


You need to make the usb bootable first Creating Bootable Vista / Windows 7 USB Flash Drive at Kevin’s Blog and you will need to do a clean install

http://www.sevenforums.com/installation-setup/7477-install-7077-x64-xp-32-bit.html
Relevancy 60.2%

After reading in the forum that 7106 is not worth the d/l, I went ahead and d/l 7077. I am currently running 7068 x64 after having upgraded from each previous build starting from 7000.
For some reason, 7077 wont upgrade from me. It stalls after the first reboot and the last portion of the install, I believe it said "adding devices..." I never see the percentage build up, just the smalls dots going back and forth.
Killed the install and had to use the rollback option.
I did see the sticky above and wonder if it could be my nvidia driver, I have the latest official ver. which is 185.20.
thxs
darco

A:Unable to install 7077 x64

You're not the first - and no one is quite sure if it is just that particular build, that particular release, or something left over from multiple upgrades that is simply getting in the way.

I personally somehow instinctively knew to go with a clean install - and it was worth it. Of course, with my setup, it is a lot easier than, say, on a laptop with a single drive....

http://www.sevenforums.com/installation-setup/7144-unable-install-7077-x64.html
Relevancy 58.91%

Hi all Networking seems to be a real pain to get to work ALL the time with Networking "The Doing - 7077 the Walk" Lambeth build W Latest build x- fixes the problem in Network Discovery where Computers on the network are randomly visible - but now I've got that wretched problem again which was fixed in an earlier release that my LAN card only has limited connectivity again even though windows reports device as working correctly So One step forward and One step backwards quot Doing the Lambeth Walk quot Wireless etc still OK and USB gt LAN adapter which is what I'm using now is OK C'mon microsoft please build 7077 - Networking Doing the "The Lambeth Walk" FIX Networking issues -- this card works in XP and VISTA although VISTA drivers won't work in W Card is Via velocity family gigabit ethernet card Diagnostics can't find any error either What's also bad is that the adapter sort of goes into a loop if you try and do anything like IPCONFIG and you have to Force shutdown Cheers jimbo

A:build 7077 - Networking Doing the "The Lambeth Walk"

Heya Jimbo.... I recently installed a belkin wireless g adapter.... after some hours (random) it will totally drop signal. Its not my modem or router. Even troubleshooting it will not work for me. Eventually end up having to unplug/replug it back in and i'm running again. Could be the adapter, but am interested in feedback about usb adapters and connectivity.

http://www.sevenforums.com/network-sharing/7172-build-7077-networking-doing-lambeth-walk.html
Relevancy 58.91%

Option A ISO on bootable USB and formatted hard disk.

Option B UNPACKED iso on second hard disk and overwrite older version by running setup.exe?


Option C thru Z methods I haven't heard of yet


(Tried search of tutorials without success - would be good to have tutorial on Fast Install Clean/Upgrade )

A:Fastest 7077 Clean Install Method?

Only method ive tried is method D: burning iso to dvd and rebooting.

http://www.sevenforums.com/installation-setup/6849-fastest-7077-clean-install-method.html
Relevancy 58.48%

Hi all About two months ago I bought myself an upgrade for my battered old pc All was working well until about weeks build lockup/freezing issue on new Total ago when suddenly I started experiencing random freezing I'm not just talking about no mouse I mean full on lockup sound on loop and unable to turn num lock on and off bad times It can freeze anywhere from while windows is loading to when browsing Overclockers to playing a game Its very perculiar I have tried all sorts from re-seating the RAM and CPU to updating all drivers Total lockup/freezing issue on new build and am thinking about clean install of windows I have been reading somewhere that a shabby PSU could be the problem I have been wondering about this as mine came 'free' with my case so it can't be owt clever By the way I have enough cooling side fan blowing onto CPU then a rear case fan sucking air out Also Event Thing in windows shows nothing Total lockup/freezing issue on new build expect for when I have done a hard reset Anyway I'm just after some ideas as to what it could be because its driving me mad My specs are below - AMD Phenom II x - Asus M A TD-V EVO Mobo - GB Micron DDR RAM - ATI Radeon - x LG DVD RW - x GB Seagate Drive SATA - x GB WD Drive SATA - Windows x Ultimate The power supply is EZCool W Socket ATX JSP If you need any more info please Total lockup/freezing issue on new build ask I'm totally stuck ALSO I can run XBMC for hours watching films but if I go to play a game it simply just freezes after a few minutes of gameplay

A:Total lockup/freezing issue on new build

  
Quote: Originally Posted by tomw92


Hi all,

About two months ago I bought myself an upgrade for my battered old pc. All was working well until about 2 weeks ago when suddenly I started experiencing random freezing, I'm not just talking about no mouse, I mean, full on lockup, sound on loop and unable to turn num lock on and off, bad times. It can freeze anywhere from while windows is loading to when browsing Overclockers to playing a game. Its very perculiar.

I have tried all sorts, from re-seating the RAM and CPU to updating all drivers and am thinking about clean install of windows.

I have been reading somewhere that a shabby PSU could be the problem, I have been wondering about this as mine came 'free' with my case, so it can't be owt clever.

By the way I have enough cooling, side fan blowing onto CPU then a rear case fan sucking air out.

Also Event Thing in windows shows nothing expect for when I have done a hard reset.

Anyway I'm just after some ideas as to what it could be because its driving me mad!

My specs are below:

- AMD Phenom II x4 955
- Asus M4A785TD-V EVO Mobo
- 4GB Micron DDR3 RAM
- ATI Radeon 4670
- 1x LG DVD RW
- 1x 500GB Seagate Drive (SATA)
- 1x 250GB WD Drive (SATA)
- Windows 7 x64 Ultimate

The power supply is: EZCool 500W Socket 775 ATX500 JSP??

If you need any more info please ask, I'm totally stuck.



ALSO I can run XBMC for hours watching films but if I go to play a game it simply just freezes after a few minutes of gameplay.




This may not be a solution yet but some other things to check.
1. Do you have the latest BIOS for your motherboard?
2. I would look into the memory setting within the BIOS. To freeze up solid like that sometimes mean that the memory may not be clearing. You could try a RAM program just to see.

Hope this helps a little .
Til next time.

http://www.sevenforums.com/bsod-help-support/83579-total-lockup-freezing-issue-new-build.html
Relevancy 58.05%

Is anyone else having problems installing Windows Live components on these builds? Anytime I try to do an install, I get a "can't access the internet" message.

If I install via a standalone installer, the program (MSN Live Messenger) works fine.

A:Windows Live install and Win 7 7057/7068/7077 x64

nope, however i only install messenger from whole live pack...

http://www.sevenforums.com/software/6837-windows-live-install-win-7-7057-7068-7077-x64.html
Relevancy 57.19%

Since I had had this pc I have had random lockups related to my PC in which only a reset can make the computer caused Asus software Lockup/Hangs build. Probably since by (IOMap64.sys usable again I was really confused and decided to turn on crash dumps I analysed the dumps and it Lockup/Hangs since build. Probably caused by Asus software (IOMap64.sys pointed out that the problem was caused by IOMap sys I checked my PC and it was in the AI Suite III folder so i decided to uninstall it However the problem still persisted and still pointed to IOMap sys as the problem I checked my c drive again and it is in this folder C Program Files x ASUS VGA COM i - k DDR RAM Palit GTX Asus X -A Deepcool cpu cooler Aerocool X-strike power supply gold GB Kingston SSD TB Hard Drive I have reinstalled OS several times to see if I installed drivers incorrectly had this install for weeks I recently uilt this PC a Lockup/Hangs since build. Probably caused by Asus software (IOMap64.sys month ago Latest dumps are from but hangs happened more than once daily I had had hangups before windows login loaded I had had hangups just when login has loaded I also have overclocking failed sometimes before windows has loaded telling me to change to defaults even though I have Going to UEFI and restarting sorts the problem BTW couldn't do the perfmon as the admin operator has refused request

A:Lockup/Hangs since build. Probably caused by Asus software (IOMap64.sys

As it occurs prior to Windows loading, drivers and programs can be ruled out for now.
Issue may be chipset drivers not installed correctly or a BIOS update is needed.
What brand of Ram is used and part numbers, may be a compatibility issue there also.

http://www.techsupportforum.com/forums/f299/lockup-hangs-since-build-probably-caused-by-asus-software-iomap64-sys-993962.html
Relevancy 52.03%

I uninstalled spybot because it was blocking something I needed When reinstalling it said there re-install spybot lockup after was some sort of file problem but it reinstalled anyway When I check for spybot lockup after re-install problems it only takes a few seconds before it took five minutes and says no problems spybot lockup after re-install were found It shows DETECTION RULES FILE CHECK LIBRARY and INTEGRATED TOOLS as available updates but spybot lockup after re-install will not download them After a few minutes it locks up and I have to kill the program It then shows the error reporting box Under quot immunize quot it shows ERROR CLSID DATABASE NOT FOUND PLEASE UPDATE heeelllllpppp Logfile of HijackThis v Scan saved at PM on Platform Windows XP SP WinNT MSIE Internet Explorer v SP Running processes C WINDOWS System smss exe C WINDOWS system winlogon exe C WINDOWS system services exe C WINDOWS system lsass exe C WINDOWS system svchost exe C WINDOWS System svchost exe C WINDOWS system LEXBCES EXE C WINDOWS system spoolsv exe C WINDOWS system LEXPPS EXE C WINDOWS System cisvc exe C WINDOWS System CTsvcCDA EXE C Program Files Norton AntiVirus navapsvc exe C WINDOWS System nvsvc exe C WINDOWS System svchost exe C WINDOWS wanmpsvc exe C WINDOWS System MsPMSPSv exe C Program Files MUSICMATCH MUSICMATCH Jukebox mm tray exe C Program Files Roxio Easy CD Creator DirectCD DirectCD exe C Program Files Common Files Dell EUSW Support exe C PROGRA NORTON navapw exe C WINDOWS System P P Networking P P Networking exe C Program Files MUSICMATCH MUSICMATCH Jukebox mmtask exe C WINDOWS System devldr exe C Program Files Digital Line Detect DLG exe C Documents and Settings All Users Start Menu Programs Startup Register Kazaa Upgrade Suite exe C Program Files WinZip WZQKPICK EXE C Program Files Dell Support Alert bin NotifyAlert exe C WINDOWS System cidaemon exe C WINDOWS System cidaemon exe C Program Files Common Files Real Update OB realsched exe C WINDOWS explorer exe C Program Files Common Files Real Update OB rnathchk exe C Program Files Internet Explorer iexplore exe C unzipped hijackthis hijackthis exe R - HKCU Software Microsoft Internet Explorer Main Start Page http www dellnet com R - HKCU Software Microsoft Internet Explorer Main Default Page URL http www dellnet com R - HKLM Software Microsoft Internet Explorer Main Start Page http www dellnet com R - HKLM Software Microsoft Internet Explorer Main Default Page URL http www dellnet com O - BHO no name - E F-C D - D -B D- B D BE B - C Program Files Adobe Acrobat Reader ActiveX AcroIEHelper dll O - BHO no name - B DE- C - BF-B B- B F A E - C Program Files Microsoft Money System mnyside dll O - BHO NAV Helper - BDF E -B - AD-A -FADC B - C Program Files Norton AntiVirus NavShExt dll O - Toolbar amp Radio - E - F- D - E- A C - C WINDOWS System msdxm ocx O - Toolbar Norton AntiVirus - CDD BF- FFB- - AD - DF B D - C Program Files Norton AntiVirus NavShExt dll O - HKLM Run NvCplDaemon RUNDLL EXE NvQTwk NvCplDaemon initialize O - HKLM Run MMTray C Program Files MUSICMATCH MUSICMATCH Jukebox mm tray exe O - HKLM Run AdaptecDirectCD C Program Files Roxio Easy CD Creator DirectCD DirectCD exe O - HKLM Run DwlClient C Program Files Common Files Dell EUSW Support exe O - HKLM Run sr exe quot C Documents and Settings All Users Application Data Dell Alert updtSup exe quot O - HKLM Run NAV Agent C PROGRA NORTON navapw exe O - HKLM Run P P Networking C WINDOWS System P P Networking P P Networking exe AUTOSTART O - HKLM Run mmtask C Program Files MUSICMATCH MUSICMATCH Jukebox mmtask exe O - HKLM Run TkBellExe quot C Program Files Common Files Real Update OB realsched exe quot -osboot O - HKCU Run Microsoft Works Update Detection C Program Files Microsoft Works WkDetect exe O - Startup TempCleaner pif C PROGRA TEMPCL TEMPCL BAT O - Global Startup Digital Line Detect lnk O - Global Startup Register Kazaa Upgrade Suite exe O - Global Startup WinZip Quick Pick lnk C Program Files WinZip WZQKPICK EXE O - E... Read more

A:spybot lockup after re-install

If Spybot seems to freeze up during an update, it could be because the server that you are downloading the updates from is swamped with update requests. You can choose another server. I have always had good luck with the Australian server.

You may want to check out this thread for more detail.

http://forums.techguy.org/showthread.php?s=&threadid=178672&highlight=spybot
 

https://forums.techguy.org/threads/spybot-lockup-after-re-install.191601/
Relevancy 52.03%

certain that a piece of my hardware is causing major issues here but I'm stumped as to what and why I built this spare PC from parts from my past rigs It freezes at random points sometimes Lockup OS (on install) fresh just while idling sometimes while working I can move the mouse around but there is no response from clicking on anything or pressing any keys only solution to power it down is hold power button or switch off PSU SPECS Pentium D E GHz ASUS P QL-PRO on newest BIOS revision GB DDR RAM GB Gskill Mhz downclocked to to match the other GB Patriot Mhz stick Seasonic W PSU Seagate momentus OS Lockup (on fresh install) RPM GB HDD EVGA NVIDIA GT Superclocked edition Win Pro -bit -HDD Tune OS Lockup (on fresh install) offers no health warnings on the drive OS Lockup (on fresh install) yet just before the rig freezes Resource Manager shows disk I O usage at yet nothing is using over mb s -Matching sticks of RAM from two different kits is awful im aware yet this problem still occurs if i use either the patriot stick or the gskill stick -PSU fan is seemingly maxxed could it be a power issue not much sag on the V according to HWMonitor Brainstorm with me I love you guys lt

A:OS Lockup (on fresh install)

What is the model number of your powersupply so we can look it up and determine the power outputs.

http://www.bleepingcomputer.com/forums/t/512899/os-lockup-on-fresh-install/
Relevancy 52.03%

I'm trying to install XP Home OEM (w/ SP2) on a machine, and it keeps locking up at 26% while copying files (it gets to mll_hp.dll). A friend told me that there is an issue with some autodetection rountine at about that point, and that the routine could be turned off, but didn't give me specifics. A quick google search hasn't turned up anything. Does anybody here know anything abou this?
 

Relevancy 51.6%

Not sure if anyone's reported this yet, but I did a clean install of 7077 on my backup computer and anytime I start an application download and select "run" from the download menu, it downloads the program but will not start it, I have to go back and save the file, and run the .exe from there.

Anyone else run into this and found a fix?

A:Can't install programs from "run" DL option in 7077

That's a strange 1. I've not had that issue with any build. Sorry, can't help you out there, hopefully someone can though

http://www.sevenforums.com/general-discussion/6880-cant-install-programs-run-dl-option-7077-a.html
Relevancy 51.6%

Can I install Icon Packs designed for Build 7600 to Build 7601?

An Icon Pack was saying install on to 7600 only and after I checked my regedit, I learned that I have 7601 (Probably SP1, I don't know).

Would I have any problems if I install the icon pack?

Thanks.

A:Can I install Icon Packs designed for Build 7600 on to Build 7601?

You can normally install icons anywhere you like, on any machine or system which uses them, they are merely small graphics of various types. Unless the "Icon-pack" is using software to install something else, ( in which case be careful what it does), you can install it anywhere.

Some "Icon-packs" make extensive changes to system files, are dependent on the system to which they are installed, and best avoided.

Regards....Mike Connor

http://www.sevenforums.com/customization/155091-can-i-install-icon-packs-designed-build-7600-build-7601-a.html
Relevancy 51.17%

Hi,

Right the problem is as follows.

I am trying to install Xp on my machine. so i set the BIOS to boot form the cd load the CD into the drive and sit back.

The cd loads and the windows says that it is inspecting my hardware config, that goes ok, then the blue screen comes up, in the top cornre it says windows setup at the botom it says its compy files across, that works fine untill it says starting windows then everythig stops for 10 secs then my HD and CD drive start blinking and i think here we go. then the num lock light on my keybord goes off and the screen goes black and stays there......

i have left it for 30mins and nothing happens.....


HELP please....

Dz

A:Windows XP install Crash/lockup

hi

try updating your bios, you should beable to get the latest version from your motherboard manafacturs website.

the other thing you could try is to install win95/98/me and the do a upgage (run xp set up from the desktop)

hope it helps

http://www.techsupportforum.com/forums/f10/windows-xp-install-crash-lockup-4593.html
Relevancy 50.74%

O S Windows Xp Pro X I was updating my O S The only update available was the SP I read the post about Tv Media so I did a scan before trying to install Downloaded the file The file started installing when my computer locked up No worries or so I thought I did a chkdsk p and found error I did a last known good restart My computer will boot up go to the logo screen and then act like it is going to the logon screen where it will Pack Service install 2 to pro lockup X64 xp Computer trying just sit with a black screen with a mouse pointer I have tried starting in safe mode no cigar So I brought out the Windows cd and tried to repair windows Well Computer lockup trying to install xp pro X64 Service Pack 2 it went through and did its thing Now its still doing the same thing Ok so I was going for a full wipe and reinstall I put in my disk and it came back with a bad disk error Took the cd out thinking maybe it had some dirt or fingerprints on it and noticed a lage crack coming from the center Computer lockup trying to install xp pro X64 Service Pack 2 of the cd Microsoft is sending me another one But I was wondering if there is anything I can do that maybe I havent tried in order to get my computer back up and running again Thanks for your help

A:Computer lockup trying to install xp pro X64 Service Pack 2

No suggestions?

http://www.techsupportforum.com/forums/f10/computer-lockup-trying-to-install-xp-pro-x64-service-pack-2-a-146478.html
Relevancy 50.74%

I am trying to install Windows Build from Windows Build I Install Windows 10586 10 Build Build 10240 From have just received the Windows Update Assistant popup telling me I'm not running the latest version of Windows I have it downloaded but it will not install The computer check Install Windows 10 Build 10586 From Build 10240 said my computer is good to go Asus AllInOne Model ET I've tried several times and each time it reaches the computer restarts and then it goes into quot reinstalling your previous version quot and I'm back to Build I know there are other people with the same problem but no solution One website said to delete quot Windows old folder as that may be a problem using Disk Cleanup but it doesn't show up on my Install Windows 10 Build 10586 From Build 10240 computer under quot Clean Install Windows 10 Build 10586 From Build 10240 up system files Previous Windows installations There is a quot Windows old quot folder on my C drive but it is full of empty folders I'm not sure if I should just go ahead and delete it There is also a new folder called Windows Upgrade with files in it Hope someone can help thank you

A:Install Windows 10 Build 10586 From Build 10240

Do you have the Razer Synapse software installed? That seems to have been what's caused it for me. Unfortunately I seem no longer to be able to trigger the update, darn it, as Windows now feels it has updated and all's fine (it hasn't).
uninstall the Razer software and try again. Hopefully it hasn't messed you up completely.

http://forums.windowscentral.com/windows-10/433934-install-windows-10-build-10586-build-10240-a.html
Relevancy 50.74%

If I get an .iso of Windows 10 RTM (14393) , I can install over the Preview Build (14931) I'm using without losing my personal files, Win32 programs and applications?

A:Install RTM Build (14393) over Preview Build (14931)

Yes. Mount the ISO file as virtual DVD by double clicking it and launch the Setup.exe to start upgrade.

http://www.tenforums.com/installation-setup/65102-install-rtm-build-14393-over-preview-build-14931-a.html
Relevancy 48.16%

I have a HP Elite book laptop with Windows Vista business, 64 bit, 4G memory, 2.4 GHZ, Windows Security Essentials. The laptop has run well since I have had it. About a month or so ago it started to lockup (keyboard and mouse) shortly after startup. After a minute or two all returns to normal and no further problems until the next boot. Not sure what information I need to pass on to help, but any insight would be greatly appreciated.
Many thank in advance, Eastbayboy

http://www.vistax64.com/general-discussion/304405-temporay-lockup-after-boot-lockup.html
Relevancy 43.86%

I have Build 7057, and I will upgrade to 7077 soon. What are some changes I will notice?

A:What's new in 7077?

You won't notice much cosmetic changes. The main changes are in the hardware driver support & stability. There are a lot more device drivers so more hardware is supported/installed without the need to install seperately after installing 7077 (e.g. anything from 7000 to 7057 would not recognise my Wireless LAN, 7068 & 7077 install straight away). Also you'll notice increased performance, startup/shutdown is now faster, Media Center runns a lot more smoothly. Those are just a few i've noticed, if you read through the different posts regarding 7077 you'll get a really good idea of what you're asking.

http://www.sevenforums.com/general-discussion/6885-whats-new-7077-a.html
Relevancy 43.43%

Ok im sorry didnt know i cant say that word well tanx anyway

A:windows7 7077

  
Quote: Originally Posted by rider


do any 1 have a patch crack for it


If you dont want to get banned I would suggest you edit your post, as discussing cracks and the like is against forum rules, just a heads up for you.
http://www.sevenforums.com/general-d...rum-rules.html

http://www.sevenforums.com/installation-setup/10323-windows7-7077-a.html
Relevancy 43.43%

so can i mount from 7077 and just run the install? or does it need fresh install?

A:is upgrade possible from 7077 ?

  
Quote: Originally Posted by ollie007


so can i mount from 7077 and just run the install? or does it need fresh install?


You can, and I just did from 7068 without any trouble...

use 7zip to extract the iso and run setup.

But make sure you have a backup of your data anyway, in case you need to do a fresh install anyway.

http://www.sevenforums.com/general-discussion/7793-upgrade-possible-7077-a.html
Relevancy 43.43%

Hi All After quite some time working with Build I finally decided to upgrade to Build yesterday something I now regret For some reason my computer won't let me run the ATI Catalyst Control software for my HD X video card and in addition to that won't let me install updated drivers To be fair the installation shell for did warn me that there might be can with and 7077 Problems what I do? CCC, a problem but I followed the recommendation provided to rectify it uninstall the offending software to be reinstalled afterward and continued with the upgrade Now I can't get access to my video card controls which has caused me some problems with some games that need video card control rather than game control of their effects making them essentially unplayable went from - fps to - fps at least until I can get back into the control center Now since my computer is primarily a gaming platform this creates a huge problem for me By Problems with 7077 and CCC, what can I do? not having access to the CCC catalyst control center I can't run my favorite games so I need Problems with 7077 and CCC, what can I do? to correct the issue as quickly as possible but I can't simply roll back the change Problems with 7077 and CCC, what can I do? or reinstall build over build at least I don't think I can please correct me if this is wrong so I'm really only left with two options figure out how to make it work correctly under or Uninstall Reformat and reinstall everything a task that would take me over a month in my free time I guess I'm asking then if anyone has had this problem with the CCC and whether or not anyone has managed to get it to work correctly and how If not what options do I have that might allow me to return to build without wiping my program drive I have a seperate drive for programs so I don't have to erase them all however last I heard Win and or Vista doesn't have the ability to scan for installed software and repair of the links and shortcuts without actually reinstalling everything Any help would be appreciated Thanks Greg

A:Problems with 7077 and CCC, what can I do?

I had the same problem with my 4870. You have to remove the drivers for the card that are downloaded during the update of the system that happens when you install, they are 1.1 can't remember the exact name, to remove them got to the control panel where you can see the latest updates made to the system.
Once you've done that you will be able to install the latest catalist drivers.

http://www.sevenforums.com/drivers/7109-problems-7077-ccc-what-can-i-do.html
Relevancy 43.43%

I moved to 7077 from 7068 and noticed a big performance hit. Is anyone experiencing this? Almost reminds me of Vista
Benchmarking with Geekbench and CineBench is bringing the same results but the overall system doesn't feel as snappy:
-Boot is a lot slower.
- First time you start an app is slower, even firefox could take 5 seconds, it used to take about 2 or less b4.
Almost feels like superfetch is not working properly.

A:Performance hit on 7077

Hi Kitron, welcome to the forums

Did you do a clean install or upgrade?

http://www.sevenforums.com/performance-maintenance/7369-performance-hit-7077-a.html
Relevancy 43.43%

I wasn't sure if it would actually work, but I installed 7077 on my friend's old IBM Thinkpad. He received it from a friend for free, running XP with a ton of unneeded programs bogging it down. It took about six minutes to fully start up. After putting 7 on there, it dropped to about 25 seconds. Most of the drivers weren't in the install, but after connecting it to the Internet through Ethernet, Windows Update found six 'updates' in about half a second...all of them being the missing drivers.

It's not near as fast as 7 could be, but it's running a hell of a lot faster than it was before. It also scored a much higher WEI than I thought it would (graphics aside).

A:7077 on an old IBM Thinkpad

You didn't state the Thinkpad model...is it a T43??

I have Win7 running on my T43 and it's not bad at all. It seems to have the same CPU specs as you have in your Pics but I have 1.5GB of memory. It's pretty cheap to upgrade memory. My T43 seems faster than any Atom netbook I have played with.

I can't wait to vLite (or better yet, 7Lite) the final Win7 version to reduce the unneeded parts of the OS to help make this old laptop a valuable piece of gear for snappy surfing and email.

http://www.sevenforums.com/installation-setup/6905-7077-old-ibm-thinkpad.html
Relevancy 43%

I dont get the build numbers still despite all the threads I have read.

It would seem that 7106 is newer than 7077, but I read that is not the case?

The 7077 I DL'ed and installed did not perform well at all. I just installed 7106 and it has icons that 7077 did not, and it is blazing fast compared to even 7068 I am running on another drive.

7106 seems newer and faster to me...

A:differences in 7077 and 7106

another strange thing about the 7106 I installed, it does not have the eval water mark in the lower right corner.

The EULA shows RC at the bottom..

http://www.sevenforums.com/general-discussion/7534-differences-7077-7106-a.html
Relevancy 43%

I have a problem with 7077 that I cant see to find anything on...

The taskbar is very weird. These are the symptoms:

1) When it is on the top, it extends past the normal height and is as "tall" as is "wide" when it is docked on the side. Everything looks right, but the mask extends too far down, making things there (the top of my browser, icons) blurry.

Sometimes this goes away when I move it back and forth to different positions... or sometimes:

2) After moving it around, ill have it on the top of my screen. But there is a taskbar mask on the left side of the screen too! So the bar is at the top and the left inch of my screen is randomly blurry (from the taskbar mask).


Have any idea what can cause this? Im fully stumped.

A:Taskbar Weirdness is 7077

It sounds like a graphics issue, have you got the latest drivers installed?

http://www.sevenforums.com/general-discussion/7665-taskbar-weirdness-7077-a.html
Relevancy 43%

Which build you feel is good (7077 or 7100)?

Not only by the numbers but which is good between these 2....
Even though I installed fresh 7100 but it crashes more than 7077...
Any one else having the same problem....

My explorer crashes more oftenly when I right click on any item or folder...

A:Which is good 7077 or 7100???

well 7077 is irrelevant now. Ive had no major problems with RC.

http://www.sevenforums.com/general-discussion/9739-good-7077-7100-a.html
Relevancy 43%

Hello just found this out,

Build 7100 will allow upgrades after all but from build 7077 up only. Without having to edit install routine.

Hope this helps.

A:7100 RC will allow upgrade from 7077 only

ah that blows
i was hoping to upgrade from 7106 ^^ which is another lower build, forget which it is now.

guess its a clean install

http://www.sevenforums.com/general-discussion/7724-7100-rc-will-allow-upgrade-7077-only.html
Relevancy 43%

Hey guys,

On my laptop I'm running build 7077 because I don't want to upgrade to 7100 yet but my mom's laptop just got totally infected beyond repair and its time to erase and reformat. I'm wondering if I should just install Windows XP again or install Windows 7 7077 or 7100 x86? She has a dell inspiron 6000 with 1.5 gigs of ram and a Intel Pentium M 1.6ghz but which OS is best?

Thanks

A:Windows 7077 vs 7100 x86?

Go with the latest, RC 7100 32bit.

http://www.sevenforums.com/general-discussion/9434-windows-7077-vs-7100-x86.html
Relevancy 43%

Anyone else running x64 7077 able to use folder.jpg's properly? Worked fine in 7000 but now all of my folders display multiple thumbnails instead of the folder.jpg. Tried deleting thumbs.db, and duplicated issue in another user account.

A:folder.jpg not working (7077)

*bump*

To clarify about folder.jpg: in previous versions of Windows (XP, Vista, 7 build 7000) when an image file called folder.jpg is placed in a folder, it automatically becomes the default folder picture/thumbnail for that folder (without needing to specify it manually via the Customization screen).

What's happening for me now though is instead of seeing the folder.jpg image as the folder's thumbnail picture, I see the live contents thumbnails instead (the same as if there were no folder.jpg in the folder).

image: http://i171.photobucket.com/albums/u.../Capture-1.jpg

I'm not really looking for a solution at this point, but confirmation from others whether or not the function works.

If someone who has 7077 and can confirm that folder.jpg works properly (ie shows as the folder thumbnail for a folder that contains two or more image files), please chime in as that will help me decide whether I should reinstall or wait out the next build. Thanks in advance.

http://www.sevenforums.com/general-discussion/7017-folder-jpg-not-working-7077-a.html
Relevancy 43%

Hey guys I noticed that I get an OS related internet disconnect every few hours for no reason, I THINK it's every time the computer gets out of sleep. I have to reset to fix it.

What may be the problem ?
Many thanks, good forum you have going here.

A:Disconnects with Windows 7 7077

  
Quote: Originally Posted by Silencer23


Hey guys I noticed that I get an OS related internet disconnect every few hours for no reason, I THINK it's every time the computer gets out of sleep. I have to reset to fix it.

What may be the problem ?
Many thanks, good forum you have going here.


Hi Silencer, Welcome to the Forum.

Go to Device Manager, Network adaptors, right click on your adapter, select Properties, Power Management and make sure there is no tick in the top box.

I hope this helps

Pooch

http://www.sevenforums.com/network-sharing/7719-disconnects-windows-7-7077-a.html
Relevancy 43%

I can't believe this, after the long wait and download, I now get a damn error when trying to burn with PowerIso. Why? Can someone maybe help me?

A:Error burning 7077!

Hi, TheBull,Why are you burning it. Use WINRAR to open the files ,and then install it with the setup.exe file?

http://www.sevenforums.com/general-discussion/6692-error-burning-7077-a.html
Relevancy 43%

Hello, I have windows 7 build 7057 32bit installed,
will it make a difference if I updated it to 7077 32bit version, if this is possible in the first place .. ?

thanks!

A:upgrade from 7057 to 7077

Hhhhmmmmm . . . . . . will it make a difference? Yes. Will it be worth the trouble? Maybe. Is it possible? Probably. Now you know less than before.

Bye.

http://www.sevenforums.com/installation-setup/7097-upgrade-7057-7077-a.html
Relevancy 43%

I was just playing with an old r40 with a 40gb hard drive. Ubuntu sees it as /dev/sda but the win 7 installer doesn't see it.

I only have a usb jump drive with 77 with me, but I don't understand why 7 cannot see the hd?

I thought it would be fun to see how 7 runs on this older hardware.

What am I missing.

Thanks

A:IBM R40 7077 cannot see hard drive

A BIOS upgrade allowing it to work better with Vista (and thus 7)....

Does it not see the HD at all? If Ubuntu does then format the Drive as ext3 or NTFS and then try W7 again....

http://www.sevenforums.com/installation-setup/7446-ibm-r40-7077-cannot-see-hard-drive.html
Relevancy 43%

So, I got bored so I'm installing Win7 7077 64bit on a small 200gb partition. How do you all like it so far? You think it would of fixed my surround sound issue I've been having with Win7 (onboard surround sound)?

A:Installing 7077 64-bit on another partition, how is it?

not sure But I did Install 7077 x64 on a 30 gig partition on my Media Center machine (now it dual boots vista and windows 7) and it works like a champ...

http://www.sevenforums.com/general-discussion/7240-installing-7077-64-bit-another-partition-how.html
Relevancy 43%

I opened Windows Media Center in build 7077 and heard an opening sound I was not familiar with..maybe it was just me ? lol

A:New MC Opening Sound in 7077

What was your previous build? My sound changed from 7048 to 7068, but I never installed 7057....

And it looks quite different upon opening as well....

http://www.sevenforums.com/general-discussion/6768-new-mc-opening-sound-7077-a.html
Relevancy 43%

You can't restore bookmarks. When you locate the restore file .json, Firefox crashes.

It worked fine in 7068. It looks like MS is going backwards again.

A:7077 Breaks Firefox 3.07 and 3.08

You could import the bookmarks.html instead.

http://www.sevenforums.com/browsers-mail/6755-7077-breaks-firefox-3-07-3-08-a.html
Relevancy 43%

i recently did a clean install of 7077 X64 replacing 7068 now for some reason i have two windows 7 listed in boot manger, the first one is the new one the second doesnt even work says boot manager is missing or something along those lines, so i formated and installed again same problem, when starting up after the first start up it takes for every to actually boot it just sits there after the win 7 little colors swirl to make the windows emblem

iv never had this problem before, all my drivers are up to date everything.
anyone have any ideas?

A:Win 7 7077 X64 boot error

Hello TripOG,

If the other Win 7 listed in the Windows Boot Manager screen is just a bad entry, then you can delete after you have booted into the good Windows 7. This tutorial will help show you how to.

http://www.sevenforums.com/tutorials...list-boot.html

Hope this helps,
Shawn

http://www.sevenforums.com/general-discussion/6882-win-7-7077-x64-boot-error.html
Relevancy 42.57%

Hi all,

Wonder if I'm doing something really daft but can't seem to install different versions of Windows 7 based on 7077 build e.g. Home Basic, Professional.

I donwloaded 7077 and have installed on a Vmware Workstation 6.5 VM, this allowed me to select the Professional SKU. Also trying to install 7077 on HP laptop and Samsung Netbook both machine are automatically installing Utlimate SKI and dont give me the option of other SKU's on install.

7077 installed via USB hard drive and DVD same issue
7077 ran from XP on Samsung, 7068 on laptop and boot off USB on HP.
I have also formatted drives prior to install.

I must be something daft here!

Anybody else having the same issues?

Many thanks

Dave

A:7077 x86 - Select different SKU Home Basic

Delete /sources/ei.cfg from the ISO and it will give you the option to choose which version, but you can only activate ultimate.

http://www.sevenforums.com/installation-setup/6732-7077-x86-select-different-sku-home-basic.html
Relevancy 42.57%

After a long struggle with my DIgital Cable PID, which I've since solved, I was very excited to upgrade my main HTPC to the latest Win 7 Beta. I was planning to do this with 7068. However, in the mean time 7077 came out. Problem is, 7077 breaks Arcsoft's Total Media Theater - which makes it a deal breaker. Cyberlink is not an option, as we have a fair amount of HD-DVD's. I have no problem rebuilding a 7068 installation (which amounts to re-cloning my working Vista installation, and then upgrading it from there so I can keep my HD content), but I'm wondering if I'll miss anything.

I know that all the hardware I have on this system has been supported since 7000, so I'm really concerned about performance bugs - especially Media Center bugs.

Thanks!

A:Need to go back to 7068 from 7077. Lose anything?

**delete***

http://www.sevenforums.com/general-discussion/6895-need-go-back-7068-7077-lose-anything.html
Relevancy 42.57%

Installed the update (not a clean install). After about 1.5 hours, everything was back up and went into 7MC. Asked if I wanted to use previous settings, I said yes. Get a Playtime install screen, then get error (although playtime was already installed). Went to the next screen and get my PID key request, type it in and says error (I know which keys to use, installed it about 5 times now).

Try several different options as far as uninstalling playtime, try going through 7MC setup, continue to get the error.

My question is, will the PID registration automatically fail if Playtime is not installed. I'm worried that I now have a useless PID as some others have reported. Installing Windows Vista Home Premium from the reinstall disks hoping I can get the PID to work. If not....wife is gonna kill me.

A:Upgrade Problems (7022 -> 7077)

Did you try just skipping it? I have yet to enter the PID while updating to a new version. I've always just clicked 'next' and put it in after the upgrade finished.

http://www.sevenforums.com/installation-setup/6751-upgrade-problems-7022-7077-a.html
Relevancy 42.57%

Hello people I m Stephen and boy am I glad to have found this site For the last week or so my laptop has been giving me some grief and is driving me insane It s approx months with Laptop 7077 Problem Advent my old Pentium Ghz RAM and Gb More often than not when I turn it on it won t start up I m often left with a black screen and nothing happens For some reason i ve noticed that if I press the F button a few times it will eventually start but then may Problem with my Advent 7077 Laptop just switch off Other times it will start up then make a bleeping noise a few times then switch off Or yes there s another one it will start up normally work for a few minutes then freeze and switch itself off I was actually in the middle of writing this message last night when one it just cut out on me hence why i m retyping it today I eventually got it to startup and work ok so I ran a virus check through Norton and nothing was found Can anybody give me any advice - other than chucking it out of the window of my rd floor flat Regards Stephen nbsp

A:Problem with my Advent 7077 Laptop

Sounds more like a hardware issue, but just to be safe, check your event viewer (Start>Control Panel>Administrative Tools>Event viewer). Look under the System area for any errors and post the EVENT ID, SOURCE, DESCRIPTION of any errors.
 

http://www.techspot.com/community/topics/problem-with-my-advent-7077-laptop.72749/
Relevancy 42.57%

Hello,

I've had a new problem on my 7077 installation.
Although my pc is running fine, when I try to click on my c drive, it says that it's not accessible.
There is therefore no information shown for it in terms of size, or or free space.
Even when logging in as an administrator, I cannot access it.

EDIT - I cannot even access my DVD drive, although I can access my D partition...

All was working fine until earlier this morning - and no, I haven't visited any 'dubious' sites recently

Any advice would be greatfully received!

Very Best Wishes,
Bob.

A:7077 C drive not accessible problem

Why arent you running RC?

It sounds like you used the upgrade install method from a previous build and I would therefore recommend a clean install to RC.

http://www.sevenforums.com/general-discussion/10991-7077-c-drive-not-accessible-problem.html
Relevancy 42.57%

hello
just installed win 7 7077 and i'm having some trouble,
anyone having trouble with (Adobe Flash Player) draging when playing?
i tryed it and it drags.if i start the show over it plays fine till i
get to the part where i stoped it. seems like it not buffering or something .
any help please
thanks scrooge
ps. here's the link with the shows i was trying to play
Joe the Bartender - Jackie Gleason Video Clips

A:win 7077 x64 and Adobe Flash Player

Yeah I'm having the same problem and I can't determine what's causing it. Flash streaming videos (such as BBC iPlayer) will play smoothly for around 30 seconds and then I will get a constant slight video judder which is most noticable on camera pans. Does this sound like what you are experiencing?

I've tried different GPU drivers (nVidia 8800M GTS) and different versions of the Adobe Flash player, but to no avail. It happens in both IE8 and FF3. Bandwidth of video stream has nothing to do with it either. Didn't experience this in 7068.

Hmmmmm.

http://www.sevenforums.com/network-sharing/6883-win-7077-x64-adobe-flash-player.html
Relevancy 42.57%

Have faster 7077 the RC ? (7100) official much than been 7077 much faster than the official RC (7100) ? using amp now the 7077 much faster than the official RC (7100) ? official RC 7077 much faster than the official RC (7100) ? i e on my tabletpc HP TC tablet PC with GB RAM Core Duo Did a fresh install of few days back but I am noticing it is slower than Same limited set of application installed on both i e MSO K Lotus Notes Firefox Acrobat gtalk thats it Both updated with all drivers etc only from windows update no mfr drivers Same effects etc enabled in both only desktop composition amp visual style amp smooth fonts System is much slower and IE as well as windows explorer take time to display anything and also hang at times Bootup to login screen is much slower than WEI scores for hard disk ram cpu etc are all same as earlier Is someone else having this problem Any experts who could guide me as to how to go about troubleshooting this Any chance that MS would have enabled more debugging reporting options in vs Thanks in advance I had drive imaged the amp am thinking of going back if I don't find a resolution in a day or two

A:7077 much faster than the official RC (7100) ?

Don't know anything about that, but on my computer there was no big difference in computers performance between build 7077 and RC ...
And I must also say that I installed 7077 threw Windows upgrade and the RC as a fresh install.

Anyway, IE worked just fine on both 7's.

http://www.sevenforums.com/general-discussion/8955-7077-much-faster-than-official-rc-7100-a.html
Relevancy 42.57%

Hey,
I had an extra laptop hard drive lying around so i wanted to put 7 on it. the bad part is that it has some bad sectors and i dont know how to flag them or anything.... So i was installing 7077 and after the expanding files step it went to reboot.... and i got the "BOOTMGR is missing press Ctrl + Alt + Delete to reboot" error. So i went to the system recovery option in the DVD's main screen and it is asking me to find the hdd's drivers.... help!

A:7077 installation reboot fail

Welcome ChodeOfDoom,
Did you use an external hard drive?
You can use chkdsk (checkdisk) to repair the hard drive.

http://www.sevenforums.com/installation-setup/7480-7077-installation-reboot-fail.html
Relevancy 42.14%

Hi all,

I am building a new pc from scratch. I was just wondering when its all put together do i simply put te Windows 7 disk in the drive & instll or is there more to it?

Many thanks in advance.

A:New build install help.

For better help with problems, Can you post your specs.
Filling out System Specs
System Info - See Your System Specs

Dont Know What Hardware You Have..??
VistaForums SysInfo Tool - Vista Forums

http://www.sevenforums.com/installation-setup/200240-new-build-install-help.html
Relevancy 42.14%

I am attempting my first build and have assembled the system. It post fine and i can access bios . When i attempt to load win 7 OEM it does not see hard drives and i can not load from supplied disc from gigabyte. I have only one sata hard drive and 2 sata dvd burners. I have disconnected every thing from the sata ports but the hdd and one burner. I have read about using f6 to load drivers but am unaware of how to do this and if it would even help.

A:When i install 7 oem on a new build no hdd is seen

  
Quote: Originally Posted by badgerboy54501


I am attempting my first build and have assembled the system. It post fine and i can access bios . When i attempt to load win 7 OEM it does not see hard drives and i can not load from supplied disc from gigabyte. I have only one sata hard drive and 2 sata dvd burners. I have disconnected every thing from the sata ports but the hdd and one burner. I have read about using f6 to load drivers but am unaware of how to do this and if it would even help.



Have you set your new HD to ACTIVE.

http://www.sevenforums.com/installation-setup/38739-when-i-install-7-oem-new-build-no-hdd-seen.html
Relevancy 42.14%

New build ----------------------------------------------------------- MOBO AD XR G Rev x BIOS whatever is preinstalled Processor AMD Athlon X Windsor Memory DDR PC Video Sapphire Radeon X PRO HDD G K SATA WD G IDE WD install Cannot new on XP build OS Windows XP Pro Other ATX V EPS V W PSU ------------------------------------------------------------ Old machine ------------------------------------------------------------ ABIT mobo P Nvidia GT W PSU Same HDD s Same optical drive Same floppy drive Same sound card ------------------------------------------------------------ I took all the components from my old machine listed as same and put them into the new build Upon first boot the BIOS came up saying corrupted BIOS I believe I may have used the setup disk which came with the mobo here but it NEVER went to the quot Updating your BIOS please don t turn off your PC quot screen It rebooted and I went into the BIOS Cannot install XP on new build and config d the boot priority for my HDD installation of XP which worked on old machine Unsurprisingly windows did not fully boot on the first attempt That is to say that it got to the quot windows loading quot screen and rebooted after a second or so I figured that Windows could not handle all the hardware changes I made So I reconfig d the boot order to boot from the optical drive and put in my XP install disk Windows got all the way through the quot press F to do SATA quot quot press F to recover corrupt installation quot checking buses checking this checking that and then when it gets to quot starting windows installation quot I get BSOD It said check for viruses new hardware new software and other very vague check-everything-in-the-whole-house type messages So I attempted doing the F recover but it said to install a floppy or something and i didn t know how to proceed I thought maybe there is an issue with the XP install disk So I put it in another PC and booted from it The install got past the same screen which it had crashed on for consecutive attempts and got to the quot hit F to accept agreement quot screen So I am doubting it s the XP install disk My mobo has LEDION LED s really nice feature which tell you if a certain component is getting power There is one which does not come on when all the others do It is the PWR one near the PWR RESET buttons which are a nice feature but not very reachable behind the HDD s The NB SB CPU DIMM LED s are all on I don t know which power source the PWR LED refers to and the manual does not specify anywhere Having said all that Are the mobo and all other components compatible Could the windows issue be due to such an incompatibility If yes which component else what can I try next end if I am thoroughly angry with epox as I get no response from email protected or from their online ticketting system and the number they have listed is out of service It says to call another number but no one picks up Any help on how to contact these ppl would be greatly appreciated Thanks Josh nbsp

Relevancy 42.14%

Building a new computer the disk I ordered doesn?t not have sp1 . I have a disk of sp1 that I got from Microsoft when Sp1 came out .Should I install sp1 after install of windows 7 before running windows update?

A:Install on new build

The best would be to install all recommended updates (including SP1). In the case that your internet is damn slow, you can use SP1 disk right after installation if you want to and it is really from microsoft. If you are unable to do something, you will be prompted before the install.

http://www.sevenforums.com/installation-setup/177540-install-new-build.html
Relevancy 42.14%

I'm currently running 11082 and Windows update is attempting to push 14257 out to me but it's failing to install. The update downloads ok, but when I restart I boot into the windows repair menu instead of the upgrade screen. I've tried to do an automatic repair, but when attempting that I get the message "the drive windows is installed on is locked"

The only thing I can do is reboot, at which point I boot right back into 11082 with no problems.

I have no idea why the update isn't installing and I don't even know where to go look for an error message or something like that.... any help?

A:New Build Won't Install

Originally Posted by cls


I'm currently running 11082 and Windows update is attempting to push 14257 out to me but it's failing to install. The update downloads ok, but when I restart I boot into the windows repair menu instead of the upgrade screen. I've tried to do an automatic repair, but when attempting that I get the message "the drive windows is installed on is locked"

The only thing I can do is reboot, at which point I boot right back into 11082 with no problems.

I have no idea why the update isn't installing and I don't even know where to go look for an error message or something like that.... any help?



Hi cls and welcome to Tenforums.

First, turn off Fast Startup

To understand what this is/does (it was first introduced in Windows 8):
“Fast Startup (aka: hybrid boot or hybrid Shutdown) is a new feature in Windows 8 to help your PC start up faster after shutting down. When turned on, Windows 8 does this by using a hybrid shutdown (a partial hibernate) method that saves only the kernel session and device drivers (system information) to the hibernate (hiberfil.sys) file on disk instead of closing it when you shut down your PC. This also makes the hiberfil.sys file to be much smaller than what hibernate would use (often 4GB or more). When you start your PC again, Windows 8 uses that saved system information to resume your system instead of having to do a cold boot to fully restart it. Using this technique with boot gives a significant advantage for boot times, since reading the hiberfile in and reinitializing drivers is much faster on most systems (30-70% faster on most systems tested). If you have a motherboard with UEFI, then fast startup will be even faster.”

Problem is, when you shutdown your system and then restart it, if your "hibernated info" is corrupted, W10 will try to load it, and can fail with an error that the drive is locked.

Then, grab the esd file from your 14257 download:
Show hidden files
C:\$Windows.~BT\Sources\install.esd

Use the tutorial here to convert to an ISO, then mount the ISO and run it from within your current 11082. Make sure all other drives and external devices are disconnected when doing the upgrade.

*Please make sure you have imaged your drive before doing this, in case you need to go back.*

Hope that helps!

http://www.tenforums.com/installation-setup/40458-new-build-wont-install.html
Relevancy 42.14%

Hi As I continue with build & Help install to have issues with my new build I wanted to post here for two reasons I thought this was going to be pretty easy Maybe if some other new guy out there ran across this thread they would have some information to fall back onto I ran a search of the forums but couldnt easily find the information I needed so thus Help with install & build the post So my issue is that while installing I get an error that says windows could not format a partition on disk The error occurred while preparing the partition selected for installation Error Code x I have tried to format the drive multiple times but run into a quot format failed quot error from the command prompt when I attempt to format Is the drive bad Am I doing something wrong I was in the computer industry on the hardware side for a few years back in but then moved to the application side and am now a system admin for a CRM application I thought I knew my stuff and that this would be pretty easy but boy how times have changed Any help would be much appreciated Another note Bios finds the drive as I thought the SATA drivers were not compatible and the hard drive monitoring tool within the bios says all is OK although I am not sure of the level of detail of this monitoring tool Did I forget a step in my build that I must take before attempting to install windows Current Operating System pre-install Do you have a single OS on your computer are you planning on multi-booting with this installation Single OS Are you multi-booting now No Current Hardware How many internal hard drives HD are connected to your system Are they IDE or SATA SATA HDD Seagate barracuda gig drive How many DVD drives are connected to your system Are they IDE or SATA Drives Sony Optiarc DVD via SATA Any external HDs used NO Check Disk Management for any HDs listed with a yellow triangle and explanation point No triangles Is this a New Clean HD Yes Have you pre-formatted the HD Multiple attempts fail Windows installation details Which build number and version of Windows are you installing Professional cant install Are you installing a bit x or bit x OS x Where did you get the ISO file from from dvd

A:Help with install & build

Welcome to sevenforums TJ. Hope we can help with your problem

http://www.sevenforums.com/installation-setup/72436-help-install-build.html
Relevancy 42.14%

Ok so its been a few months since i lost my laptop and New build to seem install anything cant i finally scraped up New build cant seem to install anything enough money to buy some peices to throw together a new desktop I bought all the peices the same day Msi k a platinum ati saphire hd amd phenom ghz wd rator gb hdd patriot gb ghz ram sound blaster x-fi w psu ok so i got home put everything together and after about an hours of trying New build cant seem to install anything to put everything together i was finally able to turn it on I bought hdd so i could raid them but quickly found out the windows vista doesnt like that So i just used raid with two drives But when i finally got windows to boot it will only stay on for about min before either freezing complety or giving me the blue screen of death When the blue screen comes on it is so quick that i cant get the error code it just says dumping memory I have tried windows xp and vista x both and have had no luck Somebody plz tell me what im doing wrong Faulty mobo video card ram nbsp

A:New build cant seem to install anything

Oh and there is a beep code error from mobo. 3 short beeps. ?????????????
 

http://www.techspot.com/community/topics/new-build-cant-seem-to-install-anything.98828/
Relevancy 42.14%

New build ----------------------------------------------------------- MOBO AD XR G Rev x BIOS whatever is preinstalled Processor AMD Athlon X Windsor Memory DDR PC Video Sapphire Radeon X PRO HDD G K SATA WD G IDE WD OS Windows XP Pro Other ATX V EPS V W PSU ------------------------------------------------------------ Problem statement I am wanting to use -bit XP pro on my new build but cannot get it to install XP 32-bit Cannot new install 64-bit build on This is to avoid dealing with XP x driver searches Cannot install 32-bit XP on 64-bit new build and I do not want to lose netmeeting and msconfig so I refuse to convert to Vista just yet Also I am not completely convinced my build is Vista ready The -bit XP install BSODs after doing quot loading all the setup files quot I have ACPI set to DISABLE The APIC option in the BIOS is unselectable and is set to ENABLE No there are not any BIOS updates available for my MOBO Yes I ran memtest and had fails on multiple passes Yes I tried default BIOS settings Yes I tried Fail-Safe BIOS settings Assumption I am convinced it is due to a BIOS setting that is forcing the machine to be -bit Reasoning for assumption I cannot install -bit Ubuntu but I can the -bit version When trying to install the -bit Ubuntu version I had to add quot noapic nolapic quot to the boot options to get anywhere but it would crash anyway complaining about acpi blah in the stack trace So why don t I just use ubuntu -bit If you didn t notice I have ATI which as of now has crap for drivers in Linux Hopefully mostly-Linux-friendly AMD will change that soon Also I tried installing FreeBSD as a further test It would install if I had ACPI disabled in BIOS and chose quot Don t use ACPI quot install Also worked when ACPI was enabled in BIOS and chose quot Use ACPI quot install So why don t I just use FreeBSD From what I understand it is more of a server OS and I could run into issues with sound or video or games or etc In summary Questions Are there any other BIOS settings I need to change to allow it to function as a -bit pc Does anyone know how to modify an unselectable BIOS option specifically APIC Is there anything else it could be Josh nbsp

Relevancy 42.14%

Hi

I am about to rebuild my pc. I will use the same drives, case and ram but the psu, cpu and motherboard will be new.

Can I re-install my win 7 using my Lic Key or will I need to buy a new one?

Any suggestions welcome.

A:Re-build PC then re-install. Lic Key ?

Hello there.

If you have a Retail key, no problem at all. you'll be able to activate it without major issues.

If you have an OEM key, you'll have to activate by phone, call Microsoft and explain the fact that you change the Motherboard and you like to use your OEM key in the new one (you'll probably have to tell them that the motherboard died, because i don't know if they'll let you activate the key if you just "change the mobo because you wanted to")

Activate Windows 7 by Phone

http://www.sevenforums.com/windows-updates-activation/145679-re-build-pc-then-re-install-lic-key.html
Relevancy 42.14%

In response to a thread made earlier I thought it only right as I'm a big fan of win to quot stick up vista) 7077 and most unlike yet (most responsive stable quot for this build and the flack it received especially in the thread title After reading through 7077 most responsive and stable yet (most unlike vista) the post I can honestly say I have had none of the problems reported and find the build to be the most productive to date with regards to speed and stability Reading through the masses of 7077 most responsive and stable yet (most unlike vista) posts the 7077 most responsive and stable yet (most unlike vista) general gist I get from it all is that are very happy with this build also To quick too often are people ready to shoot down the operating system instead of looking at how they are set up eg overclocks patches hardware software etc etc and one can only assume if nobody else has these problems they must be user generated Windows in my opinion is far more superior in every sense of the word than any other operating system has been at this stage of it's life There can be no comparison Sorry jimbo I just cant agree with your thread title

A:7077 most responsive and stable yet (most unlike vista)

I totally agree, Windows 7 is by far the best way forward. It's been too long since we had such a stable & fluid OS and if RTM (when finally out) is anything like build 7077 then I say bring it on. With the added support for various hardware & the sheer increase in performance (even with my low spec lappy LOL) it's just the bees knees.

http://www.sevenforums.com/general-discussion/6951-7077-most-responsive-stable-yet-most-unlike-vista.html
Relevancy 42.14%

Hi all
I wanted the Office 2007 addon - save documents in pdf and xml formats.
Downloaded from Ms office site.

Was prompted for WGA -- it didn't actually do anything as WGA isn't yet functional for Windows 7 -- I'm running build 7077 X-64. It just tghen passed me straight to the download.

Installed the add on.

Then I got please activate Windows -- you have 27 days (?) left to activate windows.

It activated OK but I'd ALREADY activated windows -- and where did the 27 days come from -- normally it's 30 days.

However under some circumstances I've seen (different) Windows builds - not necessarily W7 only) saying "To continue using Windows it must be activated within 3 days".

To the more mathematically challenged 30 -3 = 27 -- co-incidence perhaps.

After re-activation - no further probs -- but found it strange behaviour -- no extra hardware added etc.

Cheers
jimbo

A:WGA (Windows Genuine Advantage) is Broken (7077)

I've not had the issue with WGA on any build of Windows 7 & i have installed Office 2007 fine. I'll try downloading the file your on about and see anyway.

Also, the 3 days remaining usually occurs when you choose to 'Activate Windows Automatically once online' during installation.

http://www.sevenforums.com/windows-updates-activation/7345-wga-windows-genuine-advantage-broken-7077-a.html
Relevancy 41.71%

Hi all. So I just built my new pc, loaded it up and tried to install windows 7 ultimate 64 bit. Now when I get to the part to install windows on my SSD there is a warning at the bottom that says windows cannot be installed to disk 0 partition 1(this partition says EFI next to it) ,2 or 3. when ever I click the warning it says, "windows cannot be installed on the disk. The selected disk is of the GPT partition style. Windows must be installed to a partition formatted as NTFS. Windows cannot be installed. The partition is an EFI system partition (ESP)". I have a 256GB Samsung SSD that I bought off ebay. What does this mean?/ what can I do to fix it?
 

A:Cant install windows on new build

In the BIOS set the 'legacy' optical drive to become first boot. Also here you can format all showing partitions and then delete them all until only one remains.Then add the RST. Another reason that a new SSD may not be recognized by the bios is that it may need to be initialized and quick formatted to NTFS - 4096. This can be done if there's another drive to boot from in the system or you have access to another computer. Admin Tools Computer Management Disk Management Right Click on the Disk.
 

http://www.techspot.com/community/topics/cant-install-windows-on-new-build.195024/
Relevancy 41.71%

I have read the manual for my new EP -UD P Gigabyte board and still don't get exactly what happens when you try to install Windows after completing you build Do you need to have the BIOS configured for RAID EVEN IF YOU DON quot T USE RAID at install if you plan to use it in the future Also what are the NOOB problems everyone runs into when building a new system build and Install 7 setup on new or is it idiot proof I am reading conflicting posts here and there and the manual is just not clear on this Install and setup 7 on new build It seems to me if you don't have RAID configured at install you have to do a repair or clean install to get the capability I would like to enable all features the st time What advice can you give a NOOB What's the hardest or most confusing item on a new build Also I got a molex to P connector for my MOBO Is this advised

A:Install and setup 7 on new build

Hello Nate,

If you are not using RAID, then you will not need to set RAID in the BIOS or load RAID drivers. If your hard drive is SATA, then you would want to make sure that you have ACHI SATA select in the BIOS instead of RAID or IDE for the controller. Refer to page 52 and 55 of your motherboards's manual for more on this.

If your PSU has a 8 pin connector to use, it would be better to use it instead of the 2 molex converter. Refer to page 23 of your motherboards's manual for more on the power connections.

Hope this helps,
Shawn

http://www.sevenforums.com/installation-setup/13322-install-setup-7-new-build.html
Relevancy 41.71%

Under my C drive, there is $Windows.~BT, and there is the Sources folder. But there is no install.esd inside the Sources folder.

I need it to create an ISO file and then burn it to a DVD.
This is not the first time I use install.esd to create an ISO. I did it since 10240.

A:Build 10586. Where is the install.esd ?

Hello Billy,

Here you go.

ESD to ISO - Create Bootable ISO from Windows 10 ESD File

http://www.tenforums.com/windows-insider/28880-build-10586-where-install-esd.html
Relevancy 41.71%

I just finished assembling a new computer and while trying to install XP it gets to the point where it starts copying files and then freezes( at different points each time I try). Is there something Im missing or forgetting?
 

Relevancy 41.71%

I have been using the Omni Form Program since 1998. When I upgraded to Win 7 Pro a few years ago it installed without a hitch.

Now with a new build and a fresh install of another Win 7 Pro, it will not load.

Splash screen comes up for install. Click install and "Nothing"

Compatibility mode did not help.

I realize I have some other options. Virtual XP, and others, but I would prefer to keep business apps together.

What has changed? My other machine is still up and running but getting long in the tooth. I have many and more custom forms that I use and dread the thought of starting over with other software.

Is there something I'm over looking? It worked before with Win 7 Pro, why not now?

Any help is greatly appreciated.

Thanks in advance

Windoor

A:Program will not install on new build.

Have you tried running the install as a administrator? If not I would try that and see what happens. As Ive mentioned before in previous threads about programs not installing; By default; Microsoft designed Windows 7 default permissions so that even if your user name is a administrator; you still will have to give your user name the proper permissions to install programs. Im thinking at this point that is why your program wont install. So try and see if you can give your user name the proper permissions and try installing it again. If still nothing post back and we can go from there.

http://www.sevenforums.com/software/353315-program-will-not-install-new-build.html
Relevancy 41.71%

Looking for advice....

I am a tech that is contracted out to many many clients (car dealers, hospitals, distribution plants, restaurants, etc...).

Each client has an array of software that they run locally on Windows XP or Windows 7 clients. Often, I need to rebuild a machine for whatever reason. With so many clients and different types of software, there is no universal type of software that they use.

I am looking for a way to do this remotely and build a method to remote deploy software.

Most of these clients are on our VPN, so remote access is possible, I just need a way to launch a single executable and have it do the myriad of tasks that are required for a single install of application X.

Anyone with any ideas, please give me some advice as to where to start looking.

Thanks in advance.

http://www.bleepingcomputer.com/forums/t/459360/remote-install-build/
Relevancy 41.71%

System is Brand new and just built ASUS - AMD M N -SLI Build An On New A Install Bsod During w AMD SATA HDD creating a RAID Array SATA CD Roms drives COSAIR XMS - DDR XFX Video Card Installing Media Center Hey guys After building a new tower for a friend I created the RAID array then during the XP install I got all the way to EULA F and Bsod During An Install On A New Build then chose the array to install on After windows formats the array the bottom of the screen says checking drive C and then BAM the BSOD The error message says page fault in a non page area and the file is SETUPDD SYS My CD Roms are both SATA so I hooked up an IDE CD Rom drive same problem I switched RAM modules and slots they were in same I deleted the array created it again and even did the slow format instead of the quick one Formatted all the way and then while checking C same thing Any help will be much appreciated This is a system for a friend Bsod During An Install On A New Build and he needs it for his business

A:Bsod During An Install On A New Build

Did you install the SATA drivers...during the XP install? At the correct prompt?

Louis

http://www.bleepingcomputer.com/forums/t/113654/bsod-during-an-install-on-a-new-build/