Windows Support Forum

Fresh Win7 install now cannot access partition on C drive

Q: Fresh Win7 install now cannot access partition on C drive

I upgraded from XP to Win bit I did what I thought was a clean install with the C drive reformatted But alas no The C drive was originally partitioned into C amp E with one holding the operating system and the other for general use Now I find that the original partitions are still there Win has installed onto the C partition and operates normally however when I boot up I get the option for Win or original system partition cannot install drive Fresh access Win7 on now C - haven't clicked the other option for fear of screwing things up Big issue is the C logical drive is now full causing Fresh Win7 install now cannot access partition on C drive all sorts of dramas The other partition E Primary is about GB and I cannot expand the C partition into it I tried simply deleting E with MiniTool Partition Wizard but it screwed up the PC from which it automatically recovered itself In Fresh Win7 install now cannot access partition on C drive MiniTool the C drive is listed as 'System' and the E drive as 'Active amp Boot' Fresh Win7 install now cannot access partition on C drive which I assume is the issue So how can I delete the E drive partition and expand the C drive Thought simply deleting all in the E partition would allow me to expand C but obviously as it is 'Boot' no can do Can C become the 'Boot' too easily Also in Explorer E is unseen Any advice would be appreciated Hopefully there is a solution that doesn't require a complete reinstall NB After a bit more reading her worked out it is the Boot drive being installed on the E partition and not the C Can this be moved - or installed onto C and point the start-up to C Then how does the E become visible and accessible

Relevancy 100%
Preferred Solution: Fresh Win7 install now cannot access partition on C drive

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Fresh Win7 install now cannot access partition on C drive

Try cleaning the HD Drive & reinstalling.

SSD / HDD : Optimize for Windows Reinstallation

Clean Install Windows 7

http://www.sevenforums.com/installation-setup/185756-fresh-win7-install-now-cannot-access-partition-c-drive.html
Relevancy 14.62%

I sometimes wonder about techs using tools such as Seatools, HDD regenerator etc to diagnose/repair hard drives. Do any of these tools beat Chkdsk in any way?
(besides data recovery tools, I guess those have no match in Windows).

Thank you
 

A:Do you need more than Windows default tools to check/repair a hard drive?

IMO, always use the tool provided by the vender. At the time you need this tool, you don't need a 3rd party screw-up to 'help you' really mess it up.
 

http://www.techspot.com/community/topics/do-you-need-more-than-windows-default-tools-to-check-repair-a-hard-drive.217548/
Relevancy 18.06%

Hello, I'll try to be as clear as I can.

I have my computer hooked up to my router with an Ethernet cable. About an hour ago the Limited sign popped up. With the cable connected it says Limited, but I can freely use the internet. When I take the cable out, under connections it still only says "Ethernet Limited" and I can't use the internet. I'm not sure about any specs to my comp. All I know Is I'm using windows 8 and it's from Toshiba. I know it's not much to go on, but I'm losing my mind and any help would be wonderful. Thank you.

This picture is how it looks when the cable is, and isn't, plugged in.

 

A:Limited Access with Ethernet, even when not connected

With the cable pulled out, the picture is correct (for a wired Lan Connection).
When it is attached AND you have access to the Internet, it should not be limited.
SO, get a command prompt ( start->run and enter CMD ) and enter

IPCONFIG /ALL >myTCP.txt
then NOTEPAD myTCP.txt
copy the contents and PASTE that as your follow-up
 

http://www.techspot.com/community/topics/limited-access-with-ethernet-even-when-not-connected.217393/
Relevancy 14.62%

I've said time and time again that solid state drives are the future but the truth of the matter is, traditional spinning disks still have a place inside a modern PC as a storage / backup drive. The question then becomes,...

Read more
 

A:Latest hard drive reliability data reveals it may be best to avoid 3TB drives

Well I'm glad I have never bought a Seagate HD. I usually buy Western Digital, except my SSD is Samsung.
 

http://www.techspot.com/community/topics/latest-hard-drive-reliability-data-reveals-it-may-be-best-to-avoid-3tb-drives.208285/
Relevancy 15.48%

Hello,
This is my first login and first topic , I see on this category thousands of topic at this time , my problem is error message "The disk is write protected" , I am wondering what is this mean and how to solve this error?
Sincerely Yours,
Have a wonderful day
 

http://www.techspot.com/community/topics/write-protected-drive.217334/
Relevancy 16.77%

Hi Could anyone please confirm if I buy Samsung 850 Evo 500GB, will I be able to install this on my desktop? Just looks like it only fits for laptops?

Thank you
 

A:Samsung 850 Evo 500GB, want to install on desktop

There are adapters available if the drive doesn't come with them packaged. The adapters adapt from 3.5" drive bay to 2.5" drive bay.

http://www.newegg.com/Product/Produ...scription=hdd+adapter+bracket&N=-1&isNodeId=1
 

http://www.techspot.com/community/topics/samsung-850-evo-500gb-want-to-install-on-desktop.216637/
Relevancy 22.36%

SO close Help me get this ball across the goal line I have a old quot Microtek ScanMaker E quot scsi flatbed scanner that originally came with an ISA scsi interface to give you some idea of how old it is I connected it to my PC using a equally ancient Tekram F pci SCSI card c 64bit my got scanner Almost w/Win7 old working that I ve been using with bit WinXP Pro for years The scanner has an - quot x quot scanning bed dpi and bit color reproduction It works great and I see no reason to spend a few hundred dollars to replace it just for Win compatibility so I m trying to get it to work with the bit Almost got my old scanner working w/Win7 64bit version of Windows To complicate things the company that made my SCSI card Tekram went out of business years ago so the bit XP driver was the last they made But after MUCH Googling I found a bit Win compatible driver for another card using the same chipset and low amp behold Windows recognized it It then quot detected quot my scanner for the first time but didn t have a driver Again after much searching I found a Vista bit version of Microtek s quot ScanWizard quot scanner software with bit driver and now bit Windows detects my scanner Yeah But when I try to access the scanner I get an error telling me I quot must install Color Matching System first quot for the scanner to work I don t remember any such software being needed to use the scanner with XP and there is no such program in the ScanWizard software I just installed searching online suggests I will also need to run an quot ICC Color Profiler quot Anyone have any ideas So close yet so far I love doing things I was told were quot impossible quot Help nbsp

A:Almost got my old scanner working w/Win7 64bit

That Microtek ScanMaker E3 scsi flatbed scanner ... didn't even work well with Windows XP... and the cost in time and components to attempt to make it work are much higher than a decent Canon or Epson scanner which can be had fof $40... Less if used...

On what system are you runny SCSI ?
 

http://www.techspot.com/community/topics/almost-got-my-old-scanner-working-w-win7-64bit.157055/
Relevancy 14.62%

SanDisk has come up with a clever take on a common PC accessory that kills two birds with one stone. Its new wireless mobile flash drive is designed to make it easier to transfer files between devices while simultaneously extending...

Read more
 

A:SanDisk's new wireless flash drive kills two birds with one stone

"...when you consider micro SD card slots on smartphones are on the way out."

Just because a prominent phone maker decides to experiment by not including the microSD slot, does not mean this tech is on the way out. There is REAL need for this, and if the big S doesn't want to include this in their phones, people will find other phones that do have this capability.
Lets not forget just how bad sales were/are for the S6.
 

http://www.techspot.com/community/topics/sandisks-new-wireless-flash-drive-kills-two-birds-with-one-stone.216608/
Relevancy 22.79%

Hello I have a Dell Inspiron laptop I have an image of the entire hard drive that I created when I first got the computer using Acronis TrueImage and I d like to restore that image returning the laptop back to that fresh clean original state I ve done this two or three times before and it worked great each time But now there s a problem Normally I would in boots as when drive external but laptop hard Primary recognized isn't drive used connect to the laptop a USB storage backup drive that has the disk image boot the laptop from a Rescue Media CD created by Acronis then restore that disk image from the back-up drive onto the laptop s HDD When I tried it this time round the laptop s HDD was not listed in TrueImage at all I created a new rescue media disk tried it again and got the same result I then took the HDD out of the laptop connected it to Primary hard drive boots in laptop but isn't recognized when used as external drive an adapter kit that let s you power up and plug in the drive via a USB port and external power supply and tried the same procedure using my desktop to run the operation Same result The drive was not detected by Acronis The drive does not seem to spin up at all Primary hard drive boots in laptop but isn't recognized when used as external drive when it is connected Keep in mind the drive still works when installed in the laptop -- it boots into Windows XP etc When I plug the drive into my desktop the drive does not show up in Disk Management Start Right-click My Computer Manage Disk Management It doesn t show up in either of the two right-side windows so there s no way I know of to format it or do any work on it in Windows When I go to Device Manager Disk Drives I see quot USB Device quot for that drive and under Properties it is listed as quot Disk Drives quot for quot Device Type quot and its status says it is working properly So what I don t get is it works fine when it is in the laptop boots into XP etc but when connected as an external drive or when the laptop is being run off of CD the drive can t be detected and not on just one computer but multiple Is it junk Any ideas nbsp

A:Primary hard drive boots in laptop but isn't recognized when used as external drive

It's a power issue. Had the same issue taking a 2.5" laptop hdd and attempting to hook up w/ a passive usb sata hdd cable. my recommendation is to use a powered usb sata cable. like this one: http://www.newegg.com/Product/Product.aspx?Item=N82E16812119475 having proper power will allow the USB bus to detect and power the hdd correctly. Hope this helps, take care!
 

http://www.techspot.com/community/topics/primary-hard-drive-boots-in-laptop-but-isnt-recognized-when-used-as-external-drive.174938/
Relevancy 16.34%

Hi all,
I am new to this forum..
To start, I had just bought an ASUS computer.. wanting to play games like borderlands 1, left for dead 2 etc. But, when I was very trilled waiting to start the games, both of them had blacked screen and forced shutdown my computer every time after the game has been launched!
I had done many researches in the net, changing the registry values in directx11, reinstalling the NVIDIA drivers (halfway black screen upon reinstalling), changing the compatibility to Windows 7, adding missing physxcudart_20 to the games...None of them works..T-T
Any help is greatly appreciated!
 

A:Unable to install Nvidia driver and also to play games on Windows 8.1

I'd recommend to do the following:

Perform a clean install of Windows

Re-install Nvidia drivers
Download CPU-Z and GPU-Z (or any CPU and GPU monitoring software)
Monitor both while attempting to play games - check for temperature spikes.
Doing the above will help you rule out a lot of potential issues that are causing your problems. The clean windows install will get rid of any OS related issues. You never want to touch the windows registry unless you really have to, especially if you're not very well versed in the way it works. It can cause way more harm than good. With that said, the system crashes were probably due to a bad driver instillation and was causing a BSOD - most modern systems are set to restart / shutdown when this happens. You'll never know it happened unless you changed the configuration to stop the automatic shutdown. It could also be temperature related, if your CPU or GPU overheats, it'll typically trigger a system crash as well and result in the same BSOD sequence.

Let me know how it goes after you've tried what I've mentioned.
 

http://www.techspot.com/community/topics/unable-to-install-nvidia-driver-and-also-to-play-games-on-windows-8-1.213781/
Relevancy 15.05%

Hi every one
I need your help gays
I saved some files in my USB but when I explore my USB the files are not appear
it shows that usb is empty
I do not know what to do
thanks
 

A:USB drive doesn't show my files

Have you tried the same USB on a different pc? If not, do so.
 

http://www.techspot.com/community/topics/usb-drive-doesnt-show-my-files.187106/
Relevancy 15.05%

Today, my external hard drive has not appeared on my PC. It did work before I went to sleep yet when I began my PC in the next morning, it didn't show. Can you please help me how to fix this?
 

A:External hard drive not showing up on my PC

Hello there,

There are a lot of different reasons for an HDD to stop showing. A few things you can try are:

Try using a different USB cable, make sure it is as short as the original one, or even shorter. This is important it terms of providing enough power for the drive to function properly.

Try connecting it to different USB ports.

Try connecting it to a different PC.

Sometimes the drive can misbehave due to insufficient power even if it appears to be spinning make sure you connect the HDD directly to the USB port and not through a USB hub.

Check if you can see the HDD in Windows Device Manager and in Disk Management. Good luck.
 

http://www.techspot.com/community/topics/external-hard-drive-not-showing-up-on-my-pc.209548/
Relevancy 15.05%

Hi

Thanks for any help in advance..

I own a WD MyBook 4TB hard drive, which I've used on Windows for the past 2 years. I got a macbook last week and hooked the drive into it, some error message came up so I figured it wouldn't work, however when I went to plug it back into my windows machine I got the "USB device not recognised" message, the laptop is windows 8. I then tried it on my fathers windows xp computer and it seemed to think it was a completely new hard drive..

I've done some googling on it but I just wanted to ask here incase I went formatting it by mistake or anything..any advice/help would be greatly appreciated.

Thanks
 

A:External USB hard drive not recognised on Windows after plugging it into a Mac

Sounds like you made some procedural error, allowing the Mac to alter the partition - - bad choice.

Using Windows tools, examine the partition on that drive - - should show up as
somelabel (dl): size HTFS
Healthy (other qualifiers)​
Try Control Panel ->Admin Tools->Computer Mgmt->Disk Mgmt
 

http://www.techspot.com/community/topics/external-usb-hard-drive-not-recognised-on-windows-after-plugging-it-into-a-mac.200827/
Relevancy 13.33%

Hey there all.

This problem just happened recently. Every time I put a blank CD in my CD drive, a message appears saying "E:\ is not accessible. Incorrect Function. I can watch DVDs but it won't recognize any blank CDs I put.

Any ideas?

Thanks in Advance.
 

A:Drive is not accessible - "incorrect function"

First try this from the Windows Explorer after you have inserted a disc.

Right-Click on E: drive

Select Properties from the pop up menu

Select the Recording Tab

then check the "Enable CD Recording On This Drive" box.
.
 

http://www.techspot.com/community/topics/drive-is-not-accessible-incorrect-function.166087/
Relevancy 15.48%

Hi I have a few questions about my external hard drive. I play games and I noticed that my internal hard drive was getting full so I bought a new external hard drive. I was wondering if I backed up my internal hard drive to my external one and then formatted my internal hard drive, would I have to re install everything or would I be able to access my games and such. Thanks for your time its much appreciated.
 

A:External Hard Drive

You would have to e-install all of your games, and applications, and windows updates
 

http://www.techspot.com/community/topics/external-hard-drive.213122/
Relevancy 15.05%

Guys I need all the expert help I can get I ve got a Western Digital quot My Book quot i think it was called that that has had every picture that me and my girlfriend have ever corrupt drive hard photos All on newborn external taken including when we first met holidays pets and most importantly pictures of All newborn photos corrupt on external hard drive my girlfriends pregnancy and s of photo s of our month old son that have all gone missing and even some other photo s that still show the thumbnail image don t open because I get an error saying that photo s are corrupt or damaged my girlfriend is already going mad and I don t know what software to get them back At present i ve tried opening with different picture veiwers like photoshop no luck I ve tried EASEUS Photo recovery software but then cancelled because I read that Recova could do a better job turns out recova doesn t work on external drives NOW NOTHING WILL OPEN ON THE EXTERNAL HDD I need some expert advise on what program WORKS to try and recovery these files A S A P because otherwise we will be devistated I don t wanna buy loads diferent software only to find that i m doing more damage nbsp

A:All newborn photos corrupt on external hard drive

try pc inspector file recovery. http://www.snapfiles.com/get/smartrecovery.html

ALWAYS back up photos to more than one device.
 

http://www.techspot.com/community/topics/all-newborn-photos-corrupt-on-external-hard-drive.156964/
Relevancy 15.48%

Got a WD 500 Gb ext. drive. Won't turn on. pls, help
 

A:WD external drive

Is it a brand new hard drive? if yes, then you need to contact tech support of the drive and get help
 

http://www.techspot.com/community/topics/wd-external-drive.212453/
Relevancy 15.48%

How to repair a corrupt 64gig flash drive
 

A:Flash drive repair

Hi, This really depends on how it has 'gone wrong'.
If it's a hardware failure then nothing you can do will sort it out.
But if it's a software/format failure then;
Save everything you want off of it with a program such as 'Recuva'.
https://www.piriform.com/recuva/download
Then Format it again by;
Right-click on the Flash drive's icon in 'explorer' or 'Computer',
Choose 'Properties' from the list,
Choose 'Format'
Set the option of FAT 32,
Untick the 'Quick format' option, so that you are using the slower full format option.
Click OK.
Note that all the files that were on it will be gone, so be sure to save any valuable files first, if you can.
 

http://www.techspot.com/community/topics/flash-drive-repair.212321/
Relevancy 15.05%

Copying truscont protected usb flash drive
 

A:Copying truscont protected usb flash drive

You said the same thing in the title. You could be a little bit more descriptive. As it stands, I'm assuming you are wanting to copy someone Else's copyrighted media. In either case you couldn't prove the copyrighted media is yours therefor TechSpot cannot help you.
 

http://www.techspot.com/community/topics/copying-truscont-protected-usb-flash-drive.212030/
Relevancy 14.62%

Hello I need urgent help with resolving this as I am trying to get the harddrive showing up or at least recover files by Hard Portable Drive External Slim detected Seagate PC not I was using it at school first and my computer froze so I shut down the Seagate Portable External Hard Drive Slim not detected by PC computer and restarted without safely removing Seagate Portable External Hard Drive Slim not detected by PC the hard drive at first the PC wouldnt reboot because I had it still plugged in after unplugging it and the PC loaded up it did not recognize the hard drive anymore I have tried it on several PCs including the one at home all using Windows and none of them recognize it I tried all USB ports on my PC and none of them work the light on the hard drive is ON so I know there is no connectivity issue I tried several free trial softwares even the ones by Seagate and none of them recognized the drive so I cannot use their tools for recovering files or detecting the hard drive When I check the Disk Management it does not show there When I check the Device Manager it does not show under USB controllers but it DOES show under Disk Drives I also checked and the drive is up to date The Model is BUP Slim BK In my quick launch the drive is recognized there and gives me the option to Eject it but it doesn t actually Eject it when I click on it it either stop responding or does nothing unless I manually unplug it EDIT After a really long time the Eject message says the device is already in use which is probably why it doesnt Safely eject nbsp

A:Seagate Portable External Hard Drive Slim not detected by PC

I am also having the same problem, as I need to get some stuff off my hard drive but it does not show up on any of it, was just wondering if you had found a way to fix this yet?
Kind Regards
 

http://www.techspot.com/community/topics/seagate-portable-external-hard-drive-slim-not-detected-by-pc.207640/
Relevancy 22.36%

Ok im having this problem on 2 desktops. The drives are both DVD-RW drives. They show up properly in device manager and in my computer. That is, untill I stick a disc in it. Then it will spin and act like its about to read then it says its a CD drive with nothing inserted into it. If I explore the drive there is nothing in it. I went to device manager disabled and enabled it. also updated the driver and rolled back the driver they still do the same thing. Wondering if anyone has any ideas or solutions
 

A:DVD-RW drive reads as blank CD drive when disc is inserted

What sort of CD are you using? it could just be that your drive can't read the specific type of disk.
 

http://www.techspot.com/community/topics/dvd-rw-drive-reads-as-blank-cd-drive-when-disc-is-inserted.185776/
Relevancy 15.05%

I am looking for a new USB flash drive with all of the following features:

Metal case or very hard plastic. Not rubberized.
USB 3.0 with R/W speeds of at least 50MB/s
No cap, swivel cap or removable protective casing.
At least 16GB or more.

I still have SanDisk Cruzer Micro Titanium. I am looking for something similar in size and features, but faster with bigger capacity.

Any ideas? Thanks
 

A:Recommend a good USB 3.0 Flash Drive

I bought the Mushkin Enhanced Atom 64GB USB Flash Drive. The write speeds are a bit slower than I wanted at 20MB, but read speeds are above 100MB. I can't complain though as the drive performs as advertised. And for what I want it works perfectly. The casing is hard plastic not rubberized. I know you said no cap, I had that rule as well but grew tired of trying to sort through the available options. Anyway I wanted to pass the word on the recorded speed for my purchase. My last purchase was years ago for a 16GB Cruzer Micro like the one you have.

Here are the benchmarks for my flash drive.




Code:
Starting benchmark.
Bechmarking H:(070B51D3EFFD0114)
Started at 3/27/2015 7:46:25 PM
Filename: H:\test.tmp
Starting large file benchmark. With 100MB file.
16384k:6 Write Speed:30.01MB/s
16384k:6 Write Speed:12.35MB/s
16384k:6 Write Speed:12.21MB/s
16384k:6 Average Write Speed:15.29MB/s
16384k:6 Read Speed:120.24MB/s
16384k:6 Read Speed:119.94MB/s
16384k:6 Read Speed:120.17MB/s
16384k:6 Average Read Speed:120.11MB/s
8192k:12 Write Speed:15.81MB/s
8192k:12 Write Speed:11.34MB/s
8192k:12 Write Speed:11.79MB/s
8192k:12 Average Write Speed:12.70MB/s
8192k:12 Read Speed:120.74MB/s
8192k:12 Read Speed:121.35MB/s
8192k:12 Read Speed:121.55MB/s
8192k:12 Average Read Speed:121.21MB/s
4096k:25 Write Speed:12.96MB/s
4096k:25 Write Speed:15.06MB/s
4096k:25 Write Speed:12.31MB/s
4096k:25 Average Write Speed:13.34MB/s
4096k:25 Read Speed:119.21MB/s
4096k:25 Read Speed:118.23MB/s
4096k:25 Read Speed:119.46MB/s
4096k:25 Average Read Speed:118.97MB/s
2048k:50 Write Speed:13.38MB/s
2048k:50 Write Speed:8.91MB/s
2048k:50 Write Speed:8.88MB/s
2048k:50 Average Write Speed:10.01MB/s
2048k:50 Read Speed:111.43MB/s
2048k:50 Read Speed:110.82MB/s
2048k:50 Read Speed:111.68MB/s
2048k:50 Average Read Speed:111.31MB/s
1024k:100 Write Speed:10.32MB/s
1024k:100 Write Speed:12.79MB/s
1024k:100 Write Speed:15.42MB/s
1024k:100 Average Write Speed:12.50MB/s
1024k:100 Read Speed:116.58MB/s
1024k:100 Read Speed:113.60MB/s
1024k:100 Read Speed:116.50MB/s
1024k:100 Average Read Speed:115.54MB/s
512k:200 Write Speed:11.92MB/s
512k:200 Write Speed:14.19MB/s
512k:200 Write Speed:14.09MB/s
512k:200 Average Write Speed:13.31MB/s
512k:200 Read Speed:120.32MB/s
512k:200 Read Speed:119.08MB/s
512k:200 Read Speed:120.05MB/s
512k:200 Average Read Speed:119.82MB/s
Deleting file.
Starting small file benchmark. With 10MB file.
256k:40 Write Speed:8.28MB/s
256k:40 Write Speed:11.13MB/s
256k:40 Write Speed:7.81MB/s
256k:40 Average Write Speed:8.86MB/s
256k:40 Read Speed:94.47MB/s
256k:40 Read Speed:95.36MB/s
256k:40 Read Speed:94.49MB/s
256k:40 Average Read Speed:94.77MB/s
128k:80 Write Speed:6.15MB/s
128k:80 Write Speed:13.09MB/s
128k:80 Write Speed:4.10MB/s
128k:80 Average Write Speed:6.21MB/s
128k:80 Read Speed:91.57MB/s
128k:80 Read Speed:92.04MB/s
128k:80 Read Speed:93.11MB/s
128k:80 Average Read Speed:92.23MB/s
64k:160 Write Speed:8.12MB/s
64k:160 Write Speed:11.53MB/s
64k:160 Write Speed:11.81MB/s
64k:160 Average Write Speed:10.19MB/s
64k:160 Read Speed:87.04MB/s
64k:160 Read Speed:89.33MB/s
64k:160 Read Speed:86.33MB/s
64k:160 Average Read Speed:87.55MB/s
32k:320 Write Speed:1.87MB/s
32k:320 Write Speed:11.50MB/s
32k:320 Write Speed:9.33MB/s
32k:320 Average Write Speed:4.11MB/s
32k:320 Read Speed:31.22MB/s
32k:320 Read Speed:30.31MB/s
32k:320 Read Speed:31.01MB/s
32k:320 Average Read Speed:30.84MB/s
Deleting file.
Starting tiny file benchmark. With 1MB file.
16k:320 Write Speed:1.69MB/s
16k:320 Write Speed:8.21MB/s
16k:320 Write Speed:7.90MB/s
16k:320 Average Write Speed:3.57MB/s
16k:320 Read Speed:28.70MB/s
16k:320 Read Speed:29.28MB/s
16k:320 Read Speed:28.30MB/s
16k:320 Average Read Speed:28.76MB/s
8k:640 Write Speed:4.43MB/s
8k:640 Write Speed:5.20MB/s
8k:640 Write Speed:5.06MB/s
8k:640 Average Write Speed:4.87MB/s
8k:640 Read Speed:24.73MB/s
8k:640 Read Speed:25.06MB/s
8k:640 Read Speed:24.82MB/s
8k:640 Average Read Speed:24.87MB/s
4k:1280 Write Speed:2.83M... Read more

http://www.techspot.com/community/topics/recommend-a-good-usb-3-0-flash-drive.210791/
Relevancy 17.2%

Hey guys, I've just upgraded my 5 year old pc with almost everything new. I got an Asus Maximus VII Ranger & an i7-4790k cpu & other new stuff except my graphics card & ram, 2 x 8gb Hyper X Fury 1600mhz. What I don't understand is reading the manual about the speed of ram I can install.

4 x DIMM, Max. 32GB, DDR3 3200(O.C.)/3100(O.C.)/3000(O.C.)/2933(O.C.)/2800(O.C.)/2666(O.C.)/2600(O.C.)/2500(O.C.)/2400(O.C.)/2200(O.C.)/2133(O.C.)/2000(O.C.)/1866(O.C.)/1600/1333 MHz Non-ECC, Un-buffered Memory *
Dual Channel Memory Architecture
Supports Intel® Extreme Memory Profile (XMP)
* Hyper DIMM support is subject to the physical characteristics of individual CPUs.

I would like to install higher speed rams like 2400mhz or higher if possible (are there even 3000++ mhz ddr available? Looking at my local shop, 2400mhz ddr3 is the highest) without overclocking but I'm lost at the " (O.C) " bit. Do I need to overclock them to get at that speed or can I just get rams that are made at that speed? Thanks!
 

A:Need info on RAM to install on new mobo

The OC means you will need to OC your motherboard to use RAM rated at that speed. If you are not planning on OCing, just get the 1600/1333 Mhz modules.

BTW the average person would never notice the differences in RAM speeds. Memory is not the bottleneck in computing.
 

http://www.techspot.com/community/topics/need-info-on-ram-to-install-on-new-mobo.210150/
Relevancy 15.48%

My external drive cannot be detected by any computer. I also used diskmgmt and devmgmt. I plugged it to different usb ports as well but to no avail. I have important files here and I really need your help. thanks
 

A:Undetected external drive

What OS and how do u connect to this drive? Also have u tried the drive on another computer?
 

http://www.techspot.com/community/topics/undetected-external-drive.207982/
Relevancy 15.05%

I'm in deep doggy-doo.

When my 2TB Sata-III drive wasn't being recognized (ported to a new build), I pulled the data cable off to check the connection and off came the little plastic tab that guides the plug onto the pins!

Without it, there is nothing to press contact between the cable & pins, let alone hold the cable firmly in place.

Worse, I can't even plug it in to rescue the data off it! I suspect I must have damaged the connection somehow when I plugged it in. The pins appear fine (within reason considering what happened.)

Gluing the tab back in place is no help if the connection still doesn't work and I need to unplug it again.

Am I screwed or is there a way around this mess (short of paying hundreds to some recovery service)?
 

A:Plastic tab on SATA drive port broke off

Oh boy do I know the feeling, I once pulled off the same thing from a month old mobo, but I was able to find a replacement in a shop and soldered it back, maybe you can do the same ? Try finding a female SATA and soldering the other end of it to the HDD ?
 

http://www.techspot.com/community/topics/plastic-tab-on-sata-drive-port-broke-off.209316/
Relevancy 15.48%

So my DVD drive has died on my and I hear if u get a new one off Ebay u have to get the key from the old one DVD a drive 360 dead Replacing and stick it on the new so your Xbox will read it thats all well and good if your drive would work be picked up by PC The drive is dead and there is no way of getting the key Now if my logic is right the key is stored on one of the Microchips in the board so If I can get the chip off the board by heating it up what piece of Hardware would I need to read it and software to get the Needed information off in order to flash it onto the new XBox drive I plan to order I don t want to shell out on a new console as its in full working order despite DVD drive and doing it said way would be cheaper Yes Also if anyoen knows which chip it is on the Xbox Ben Q VAD Drive I be very happy I Plan on replacing it with another benQ drive I point out I do not intend to play pirated games I just want to be able to replace my DVD drive which may be against MS EuLA but I don t care as its not breaking UK law I will use it to back my games up again fully within UK law Thanks in advanced for replys nbsp

A:Replacing a dead 360 DVD drive

If you're positive that the old drive is dead (i.e. no power to the drive) then getting the key is impossible. if the drive has already been flashed then the key should have been saved. i'm quite positive there is no way to retrieve the key from the motherboard itself, without the use of specialized equipment, that you don't have access to anyways.

buy a new console and keep the old one for parts or sell it as is
 

http://www.techspot.com/community/topics/replacing-a-dead-360-dvd-drive.152537/
Relevancy 15.05%

USB flash drive - unreadable, can't format, cannot access

Symptoms in Windows 7/8

1) I Can see drive in "My Computer"
2) Double click on drive in my computer and it says : "Please insert disc into drive H:"
3) Right click and select format and it says: "There is no disc in drive H. Insert a disc, and then try again"

plz provide any solution
 

A:Usb flash drive hp 16gb v215b

Try removing or reformatting the partition from Disk Management. If you can't, see if you can delete the partition and create a new one.
 

http://www.techspot.com/community/topics/usb-flash-drive-hp-16gb-v215b.208440/
Relevancy 17.63%

Toshiba laptop. Internet at the bottom right says there is a connection available, but says the settings saved on this computer for the network do not match the requirements of the network. It has to be plugged in to the modem to access Internet. Speakers do not work. Ports do not work either. I had it in for repair and he thought it might be the motherboard, but he couldn't fix the other one and I got help with Broni on here and it works fine now. I am hoping someone on here can help me fix this one. It has no viruses; it's clean. Thanks!
 

A:Laptop cannot access the Internet unless it is hooked to the modem

Ok, the modem=>pc config working says networking is at least sane.

To get the modem=>router=>pc to work, the pc should not have ANY configuration data stored in the network adapter settings. Can you find and clear the network adapter for yourself?
 

http://www.techspot.com/community/topics/laptop-cannot-access-the-internet-unless-it-is-hooked-to-the-modem.207405/
Relevancy 15.48%

I am building a new system, only part used is the power supply. My motherboard can't detect my hard drive. I tried switching cables but it only detects my dvd drive. Any assistance will be greatly appreciated.
 

A:Can't detect hard drive

First make shure the data & power cables are plugged in securely, on both the MB and hard drive. and no there is not a power cable for the hard drive on the MB.
 

http://www.techspot.com/community/topics/cant-detect-hard-drive.207744/
Relevancy 15.48%

Not sure where to post this so I can move it if necessary.

Started up my laptop today and I tried to open the cd rom/dvd bay and nothing happened. It will open with a pin pressed into the release hole, but not with the button. (Asus u50f)

When I looked in the device manager there was no drive listed. in computer management/storage/disk management there is no drive showing.

I took out the drive it looks ok. Is there anyway to test it or do I need to buy one and try it?

Thanks,

Warren
 

A:Optical drive is gone

Sounds like u need to replace u'r drive. I am not expert but cd rom and dvd rom do wear out.
 

http://www.techspot.com/community/topics/optical-drive-is-gone.207561/
Relevancy 15.05%

Is there any way of sharing hard drives/folder over the internet with the client side need to install anything.
I.e use add network location option in my computer
Or a client programme that is user friendly

The server side will need to run on my computer,
looked at FreeNas thats not an option,
Filezilla looks like it the best option server side of things but uses a client programe.

Im happy to run any programmes/OS's in a VM if that were needed.

Thanks in Advance
 

http://www.techspot.com/community/topics/sharing-hard-drive-over-internet-without-client-programes.207578/
Relevancy 14.19%

I had a new PC so I thought I would do a recovery disk on a separate partition of my parent's disk. Turns out windows wipes out everything regardless of partition when it does that. So now lifelong memories are gone and I'm freaking out! I used EaseUS to make different partitions which were deleted. After I found that the partition I chose stayed the same size but was renamed RECOVERY and it had the recovery data in it. However the rest was "unused" and so I dragged the RECOVERY to make full use of the disk and then I started scanning it deeply with hard drive recovery software. I am now through scanning with my 2nd program now (1st one didn't give me the files I needed) and I'm using RecoverMyFiles. The problem is I'm not really getting back any of the files I had deleted by windows, but I get some stupid windows files which were probably deleted in the recovery process!! PLEASE help me!!! I am desperate. Future hanging in balance thank you.
 

A:Recovering Lifelong Memories from Windows Recovery-Wiped External Hard Drive

There are quite a few programs you could try, I have had most success with Recuva by Piriform, but recently this program was said to be excellent by a user,
http://www.ylcomputing.com/content/view/350/153/
Obviously it's worthwhile trying both of them.
 

http://www.techspot.com/community/topics/recovering-lifelong-memories-from-windows-recovery-wiped-external-hard-drive.207350/
Relevancy 15.48%

I burn a fair amount of DVR disks with games, movies, and personal files. The drive works just fine. I can play DVDs and it reads other disk. However, I have one disk that just isn't reading at all. I ran the Windows Fix it says the media is not readable. When I insert the disk it is loading in the My Computer screen, and then makes a load funny sound and just doesn't read the disk. When it finishes, the drive ejects when you click on it and says to insert a disk. I looked at ISObuster and it also picks up nothing. I'm not 100% certain, but I'm pretty sure the disk was readable at one time. The disk doesn't appear to have any scratches, cracks, etc. Is there anything I can do to get the disk to be readable and work again? It has unreplaceable personal items. Any help would be greatly appreciated.

Thanks!
 

A:Media in DVD Drive is not readable

Have you tried using the disk in another machine, preferably a machine that has a newer drive? Is the disc a name brand disk that you know was bought from a reputable store?
 

http://www.techspot.com/community/topics/media-in-dvd-drive-is-not-readable.207225/
Relevancy 17.63%

Hi there guys

I suddenly can't connect to wifi, but the problem is solved when I use the cable, and connect my laptop directly to modem. surprisingly I checked and it seems I can connect with my tablet to wifi spot! I used recovery and system restore point, but it didn't help.

I really appreciate your help.

oh and yes in wireless mode, I can see different wifis, but when I click to connect, it tries "connecting" but fails as well.
 

A:Investigate router, access point issues

Do you use MS Update in Autoupdate? looking to see if you are 'current'.

get make/model of your WiFI device (see device mgr),
find the version of the existing driver, then
see if you can find a newer version; install it if found.
 

http://www.techspot.com/community/topics/investigate-router-access-point-issues.207216/
Relevancy 22.36%

Hi all Apologies in advance for such a long post I headaches + installation = hardware New Win7 don t know if I just have a corrupt New hardware + Win7 installation = headaches Windows Ultimate installation or what but this all started three weeks ago or so after installing new hardware specifically New hardware + Win7 installation = headaches motherboard Asus A M-A New hardware + Win7 installation = headaches processor AMD A K and RAM Kingston HyperX GB DDR Since I had the extra RAM slot I also put in one of the Aeneon XTune GB DDR I have from before the upgrade The sticker on it says it s but it shows up in BIOS POST as Since then I ve had the following problems Internet Unable to establish any connection at all when using the ethernet cable plugged into my Cisco Linksys EA Router I can connect wirelessly but that connection is lousy and I m not sure why especially since the router is only about feet from the computer To be fair the lousy wireless connection is something I was dealing with since before the hardware upgrade Windows reinstall which is why I finally gave up and bought a ethernet cable the computer used to be in a different room though on the same floor of the house The problem with being unable to get any type of connection when plugged in started after reinstalling Windows and then doing something like updates and then moving the PC to the new spot I made a point of moving the tower myself just so that I could be sure nothing happened to it so I know there was no physical damage done because of dropping or otherwise banging it around at all I ve checked the ethernet cable that runs from the modem to the router as well as the one and neither of them appear to be damaged at all I ve also tried plugging the one into all of the ports on the back of the router in the event that one of them just bit the dust somehow but nothing changed Any thoughts on how I can either get my wired connection working again or what might be making the wireless connection so horrible For clarification on quot horrible quot I m not talking dial-up speeds but some sites either load slowly or not at all sites that load up just fine on every other device in the house - specifically cell phones and iPod an Xbox a Wii and a laptop My connection to Battle net for playing WoW Starcraft II Diablo III is also pretty lag-tastic My NIC is an onboard Realtek GR PCIe Gigabit LAN controller according to the motherboard manual In terms of anything that may be interfering with the wireless signal there s a metal support post and a metal I-beam a few feet from where the router currently sits though it was previously or so feet from both Other than being in close proximity to those the room is wide open I was told that water can interfere with a wireless signal and we do have a lot of ground water under around the house can anyone verify whether ground water can degrade the signal so much over such a relatively small space Hard drive partition issues Until the upgrade when the computer just wouldn t boot presumably because Windows couldn t handle dealing with such big hardware changes all at once I had Windows installed on a partition on a TB Western Digital drive Since I had to reinstall anyway I installed Windows to a partition on a smaller but faster TB Seagate drive Up until this afternoon when I installed Seagate Discwizard one of the partitions on the big drive was inaccessible showing up in disk management and a couple of rd-party hard drive utility partitioning programs as simply quot unallocated space quot Since this afternoon though that partition is now showing up as a completely separate hard drive in disk management AND as quot unallocated space quot on the drive it s actually a part of I m a little leery of just leaving things as they are and using that partition since it s showing up different ways Discwizard only shows that partition as a separate drive there is no quot unallocated space quot showing on the TB drive Is this something I sh... Read more

A:New hardware + Win7 installation = headaches

Update: Wired connection issue is fixed. I have to (sheepishly) admit that I completely forgot to install the router via the CD that came with it. The lousy wireless performance is still a problem, though, as well as the hard drive/partition issues.
 

http://www.techspot.com/community/topics/new-hardware-win7-installation-headaches.206345/
Relevancy 16.34%

Hello hello After having a problem with my cd dvd drive I rebooted my computer and did a clean install of Windows from my Vista So right now I m running Windows Windows not install (Touch/slider) FN - 7 Clean Keys working I have a VAIO - VGN-CS J Windows looks and feels great so far The only problem is my little sliding touch pad at the top doesn t work I don t know if it s FN keys but on top of my keyboard there s a little sliding touch pad for volume along with a fast forward rewind key I used to be able to slide the volume up from there but now it s not working I looked it up and I know this has to do with my clean install of windows I tried installing a bunch of drivers like everyone said online Sony Shared Libraries Vaio Event Notebook Control Device And a bunch of other drivers that people talked about I don t know what s wrong but it s still not working so I did a system restore to before I installed everything so that I can have a clean slate Can someone please help me fix my volume control slider please Thank you so much nbsp

A:Clean install Windows 7 - FN Keys (Touch/slider) not working

Laptops have extras over and above Windows and if you reinstall the OS or upgrade it you lose these. I've been there and done that with the FZ. It was broken when I bought it and the hard drive had been removed. Fixing the computer was very hard, installing Windows 7 was easy. Afterwards, like yourself I found that the function keys didn't work. Trawling forums and looking for drivers then sorting it out took ages and that was the most challenging part of the whole exercise. Everything necessary was on the Sony support sites but these were not user friendly and I needed to use several Sony sites. Needless to say Sony support were clueless. In the end I got everything functioning but if you can manage with things as they are I'd not bother. One tip, although it might not work with your particular Vaio model is that stuff has to be installed in a particular order otherwise some keys don't work.

That'll teach you to mess with Windows when a cd/dvd plays up.
 

http://www.techspot.com/community/topics/clean-install-windows-7-fn-keys-touch-slider-not-working.207046/
Relevancy 15.05%

Hi,
My USB drive is enabled. The USB flash drive or any other storage device is recognized when connected to my laptop. But when I click on the drive in windows explorer, it says access denied. The same works fine in other laptops. I have admistror previlages. There is no local group policy set up on Removable storage access. I have searched multiple forums and tried out various options, but still cant connect to my USB drive. The drivers are successfully installed and are the latest. This happens even when I connect my camera or mobile phone. It shows up as 'Removable Disk' in windows explorer, but cant access it. I have given authorization to the drive as well. Please help.
Dnana
 

http://www.techspot.com/community/topics/usb-flash-drive-is-recognized-but-still-cant-acess-windows-7.207068/
Relevancy 17.63%

Well I am accessing my remote router via and it works access work via phone, Remote PC doesnt via ok when I am using my Phone s Remote access ok via phone, doesnt work via PC browser chrome or IE on Samsung however when I am at computer at work I cant access my router I ran Tracert and I am getting up to hoops and th says quot Request timed out quot lt ms lt ms ms lt ms lt ms lt ms lt ms lt ms lt ms ms ms ms ms ms ms ms ms ms ms ms ms ms ms ms ms ms ms Remote access ok via phone, doesnt work via PC ms ms ms border ge - unitedair- chg pnap net ms ms ms core te - -bbnet chg pnap net ms ms ms ae - chi ip gtt net ms ms ms xe- - - chi ip gtt net ms ms ms c-eth- - - -pe ecermak il ibone comcast ms ms ms he- - - - -cr ecermak il ibone comcast ms ms ms ms ms ms te- - - - -sur mortongrove il chicago com net ms ms ms te- - -cdn mortongrove il chicago comcas t Request timed out Request timed out Request timed out Request timed out Request timed out Request timed out Request timed out Request timed out Request timed out Request timed out Request timed out Request timed out Trace complete Anyone would know why it works on the phone and doesnt really go through all the way to the end nbsp

A:Remote access ok via phone, doesnt work via PC

Ok I have to ask first when you are using your phone is it always using mobile data or do you connect it at work via wifi? When reason that makes sense to me is at your work they maybe blocking the remote port. I guess it all depends on what you are using also. If you are just using standard RDP then they might be blocking port 3389. If you could give further information on how you are connecting remotely whether using software such as teamviewer or just standard RDP. Also how do you have your router configured. I can better understand witht is information thanks....
 

http://www.techspot.com/community/topics/remote-access-ok-via-phone-doesnt-work-via-pc.206550/
Relevancy 18.06%

So I have a very strange issue with my laptop.
It's a Toshiba a665-06f
I7 [email protected]
8gb ram
500gb Samsung ssd
Running Windows 8.1 pro

I can't get into the bios it boots in less than 10 secs, I've even tryed removing the hdd to get it to boot to the bios but it just sits at a blank screen when I do that. I've tryed tapping the all the f keys the del and esc on start cant get into the bios or even the boot options. Other than not booting into the bois it works great.
Any ideas please?
 

A:Unable to access bios

"Other than not booting into the bios, it works great"... So this means you can boot into Windows normally, and use the laptop?
 

http://www.techspot.com/community/topics/unable-to-access-bios.206928/
Relevancy 15.05%

I cloned my failing hard drive (a 160gb) to a new one (500gb). The installation seemed to go smoothly enough (it was my first time though) as it just required me to stay grounded and remove about 4-5 screws. When I loaded the PC up it wouldnt start the first time so I had to a Windows repair, which didn't seem to do anything except now it worked (it said it failed or something). I then had an issue with Windows 7 claiming to not be genuine although for one reason or another that stopped. Now my issue is that I am unable to access the additional memory of my new hard drive, I am able to access the cloned portion but not the rest (about 316gb). Any help would be appreciated, my PC is a Dell Latitude E6400 if that helps.
 

A:Inaccessible Memory on Cloned Hard Drive

Hello there,

It is absolutely normal not to see the rest of the free space in the moment. When you clone a drive you create the exact same image of old drive on the new one. This includes the size of the original HDD. However if you go to Disk Management ( type diskmgmt.msc in the search in the start menu and hit enter) you will see that you have one partition of 160GB and the rest of the space will be listed as unallocated. To use it you have two options ? you can create a second partition or you can extend the original one to take all the available space.

To create a new second partition just right-click on the unallocated space and select ?New Simple Volume?. This will starts a wizard to guide you through the rest of the process. First it will ask about the size of the partition. To use all the remaining space just type in the same value you have for Maximum disk space. Click Next.

Then you will get to choose and available drive letter to assign to this partition. Choose one and click Next.

Then you get to the Format partition window. You should choose ?Format volume with the following settings: ?. For the file system is best to leave NTFS. Allocation unit size as default. You can also put a label for the volume here. Then tick the box for ?Perform a Quick Format. ? Click Next. Then Click Finish. And you're done.

If at any point Windows pops up with the following message ?The operation selected will convert the disk to dynamic... are you sure you want to continue? ? click NO as this will most probably make your Windows unbootable and you will have to reinstall it.

If you want to extend the existing partition right-click on 160GB partition and select ?Extend Volume?. It will start the wizard and will only ask about how much space to add. Just select the maximum available space here and click Next, then click Finish. Once done your existing partition will be bigger and you'll be able to use all the space on your new HDD.

Hope that helps.
 

http://www.techspot.com/community/topics/inaccessible-memory-on-cloned-hard-drive.206835/
Relevancy 15.48%

Hi..

I have a problem with opening files from my pen drive. Actually I have deleted all my files from pen drive manually and after when I tried to open the pen drive contents its showing an error

"Please insert a disk into drive G:"

Please help me in resolving this problem.

I tried to rename the drive letter going to disk management but still its not working.

Is there any other method where I can repair or correct my pen drive to work.
 

A:Kingston 32GB Pen Drive

Try using diskpart to format your flash drive.
Open a command prompt (run as administrator).
Type in diskpart and press enter
Type in list disk and press enter
Type in select disk x (substitute x with the corresponding disk number of your flash drive in the list) and press enter
Type in clean and press enter
Type in create partition primary and press enter
Type in active and press enter
Type in format fs=ntfs label=Kingston_32GB quick and press enter
Type in assign and press enter
Type in exit and press enter

I hope that will fix your problem.
 

http://www.techspot.com/community/topics/kingston-32gb-pen-drive.202782/
Relevancy 14.62%

My 320 GB Seagate external hard drive is detected but not showing up in my computer. What should I do?

In cmd> diskpart> list volume it does not show up. (screenshot attached)

In Device Manager it gets detected. (screenshot attached)

In disk management it shows up as 'unallocated'. If I initialize it, will I lose all data on the drive? It had 4 partitions. (screenshot attached)

In My Computer also it does not show up. (screenshot attached)
Even BIOS recognizes it.

What to do? I don't want to lose any data on the drive. If I initialize it in device manager will I lose data?

I was installing window XP on my computer, usually I remove the external drive but this time I did not. The external drive was shown as 4 drives in partition manager during installation. But the installation failed. The next time I was installing windows again, the external drive was shown as 1 single unknown or unrecognized drive. I'm not sure if it was unknown or unrecognized. I'm sure I didn't format it. So what I need to do now? I don't want to lose any data.
 

A:Seagate external hard drive not showing up in my computer. It is detected.

Yes, if you initialize it you will 'lose' everything. You will want to try something like [email protected] Recovery or maybe Easeus Partition Recovery.
 

http://www.techspot.com/community/topics/seagate-external-hard-drive-not-showing-up-in-my-computer-it-is-detected.205926/
Relevancy 22.36%

Hi,

if anyone can help ill be really thankful.
pc 1, 2 runnging win7 ultimate x64

1 adsl modem, 1 tp-link router, 2 computers (pc1, pc2).

ADSL(modem) - LAN1 - PC1 , LAN2 - Tp-link
Tp-link - LAN1 - PC2, WAN - ADSL(modem)

Everything is working, but computers cant see each other in HomeGroup.
Tried various methods but nothing work.

So my question is how to set HomeGroup for those 2 computers. Any suggestions?
Thank you
 

A:Win7 Homegroup problem

@Moirax . I can't answer your question, but your mention of Homegroup makes me ask what is it for? To avoid hijacking this thread,I'll PM you.
 

http://www.techspot.com/community/topics/win7-homegroup-problem.206524/
Relevancy 15.48%

Hello all,

My machine is running XP professional. My problem is about the CD/DVD drive. In normal state, when it's empty, it can be opened and closed just as normal. But for most of the CDes or DVDes, one problem will occur.
The problem is, first that CD or DVD will not be read/recognized. Then the CD/DVD drive is no longer available in my computer window like that is not recognized as well. And also in deice manage's list, there isn't any CD/DVD drive item!
In those situations, every time I need to restart the PC one or several times and try to eject the cd drive and put out that CD/DVD and start the machine again. Then the CD drive will return again!

How to fix that problem please?
 

A:My problem with my cd/dvd drive

Hi, It could be the DVD's firmware is out of date or corrupted in some way (unlikely though.)
If the DVD drive shows in 'Device manager' at first boot, with no disc in, try uninstalling it (right click on the drive) then reboot the pc, it should re-discover it.
Also remove both the power plug and the data plug from the back of the DVD drive and plug them back in again just to remake the connections.
Might be worth checking the connections from the ribbons to the motherboard as well.
 

http://www.techspot.com/community/topics/my-problem-with-my-cd-dvd-drive.206353/
Relevancy 18.06%

Hello all,
Most of memories, RAM, ROM, HDD, DVD-RAM and others are
random access. What are some non random access memories please?
 

http://www.techspot.com/community/topics/non-random-access-memory.206101/
Relevancy 15.48%

My Buffalo HD which is actually a WD 500GB Hard drive. I opend it up and connected via SATA adapter but still the problem persists. I checked the drivers. Looked for clicking noise as in dead hard drive but none of those problems seems to be there. Also I tried formatting it but was unable to do so. Can anyone tell me whats the cause? It still may be the head problem but its not clicking as a dead hard drive does. It also seems to be spinning just fine but can't get to the root of the problem. Does anyone knows whats the problem?
 

A:Hard Drive Not Responding

Could be some issue on the PCB. Suppose if you were really dedicated to getting your data back you could buy the same drive off eBay or wherever and swap the boards. That may be more difficult to do since Buffalo may not have stuck to WD the whole time OR WD supplied a special series of drives to Buffalo. Check the model numbers to be sure before going that route.
 

http://www.techspot.com/community/topics/hard-drive-not-responding.206015/
Relevancy 15.05%

My old hard drive was a sata drive but it failed so I had an old ide 80gb barracuda 7200rpm drive that I wanted to install windows on but when I load the windows installation and goto custom it wont show my drive. My bios detects it its just windows . I tried using diskpart and even formating the drive to ntfs witha complete whip but still no luck .
 

A:Windows installation can't detect my ide hard drive?

Perhaps the hard drive's jumper setting is incorrect. Are there any other IDE devices connected on the same cable as the HDD?
 

http://www.techspot.com/community/topics/windows-installation-cant-detect-my-ide-hard-drive.192208/
Relevancy 15.05%

Hi,

Quick question and I believe the answer is NO. If you have a PC with one drive where OS is already running and configured, can you add another identical drive and configure RAID 1 without having to reinstall or reformat anything?

Thanks
 

A:Setting up RAID 1 on already running OS drive

Hey there, pioneerx01!

Unfortunately, you can't convert a single drive into a RAID array without data loss. At least one sector will be overwritten, which will cause problems because the file system and partition information will not be correct anymore. This will lead to a lot of annoying notifications and very unpleasant problems.
However, I believe there's a chance to create RAID arrays while keeping the data but I'd strongly advise against it.
The best way to deal with this is the safe way - back up your data and properly create the RAID 1 array.

Hope this helps.
SuperSoph_WD
 

http://www.techspot.com/community/topics/setting-up-raid-1-on-already-running-os-drive.205730/
Relevancy 18.06%

Hello there,
I have seen that you are knowledgeable regarding pc, and have also seen tht you resolved successfully several threads.

I have a laptop and up to yesterday I could connect to the internet through wifi and cable. But today I cannot.

Here you can see my wifi.txt : https://www.dropbox.com/s/27g7g6xzqb8al1e/myWifi.txt?dl=0
and here my wired: https://www.dropbox.com/s/o5nwfr6nwafoj1a/myWired.txt?dl=0
I uninstalled bitdefender to no avail.
Yesterday I was experimenting with this software: hotspot shield, bot revolt, ghostsurf. I uninstalled it yesterday and internet was working fine after that. I am just mentioning it.
I have win 8.1
I dont have any red in device mgr.

I am looking forward to your answer.
I hope you can help me
Kind regards
nisidotatos
 

A:Connected to internet, but no access

I'm posting a Win/8 solution solved in a private conversation. After proving that TCP could PING and use NSLOOKUP, it is time to suspect browser settings - - here's the solution:




jobeard said:



IE(9) -> Internet Options
General Tab
set homepage too www.google.com/

Security Tab
[x] enable protected mode

Connections Tab
at the bottom click Lan settings button
[x] Automatic detect settings SHOULD BE ON
[ ] auto script OFF
[ ] use a proxy OFF

Advanced Tab
[x] software rendering instead of GPU
Browsing
[x] disable script debugging (there's 2 of these)
HTTP 1.1
[x] both boxes
International
[x] send IDN names
[x] send UTF-8
Security
[x] check publisher revocation
[x] check certificate
[x] check signatures on downloads
[x] enable Windows Authentication
[x] enable memory protection
[x] use SSL 3.0
[x] use TLS 1.0
[x] use TLS 1.1
[x] use TSL 1.2
[x] warn certificate address mismatch
[x] warn if postClick to expand...





nisidotatos said:



It worked.
it was a problem here:
Connections Tab
at the bottom click Lan settings button
[x] Automatic detect settings SHOULD BE ON
[ ] auto script OFF
[ ] use a proxy OFF

the auto was off, and also a vpn required was on, which I deactivated.
It is working now.
This is great.
I thank you so much.
If you ever come to Greece, give me a call!!!Click to expand...


 

http://www.techspot.com/community/topics/connected-to-internet-but-no-access.205805/
Relevancy 15.05%

This issue started when I was connected to it and while accessing it recognized Google at day my despite External drive fu not attempt long I touched the cable and it disconnected Since that External drive not recognized despite my day long attempt at Google fu no luck in finding the external drive to External drive not recognized despite my day long attempt at Google fu access it I ve been using it for a a year and although a touch of the cable caused a disconnect it still worked well The device shows up nowhere on my laptop which I use to edit my photographs Here s a screenshot showing device manager disk management etc http I imgur com u ezzj png The hard drive is a WD MyBook Essential TB that is named quot Local Disk E quot on my laptop I should mention the hard drive s light is on when I plug it to the computer and will idly blink The light is off if not connected to a computer even if it is plugged in to a power source My troubleshooting steps Use different cables-- did not work Connect it to other USB ports-- did not work Connect other devices iPhone and a different WD hard drive -- all devices work on all ports Check for presence in disk management and device manager-- nothing there so I can t change the drive letter Remove all USB drivers and reinstall using Intel USB driver set obtained from Asus website using my computer model Asus G VW http www service asus com downloads c wax -- did not work Install drivers obtained from WD support website link to model http support wdc com product download asp groupid amp lang en -- did not work Shut down disconnect then start up and connect hard drive-- did not work Change cables and test-- nothing wrong with cables The biggest f you of them all connect the same hard drive to another laptop-- works flawlessly I am at a complete loss on what to do nbsp

A:External drive not recognized despite my day long attempt at Google fu

What do you mean by the point #9. Did it really worked well on different computers? Have you replaced cable or anything before connecting it to different computer?

The reason I'm asking it because you've already tried everything we could suspect off for the external hard drive to not work properly.

Instead of connecting it externally, try connecting it directly to the motherboard using SATA/IDE cable and see if it may start properly and allows you to see your data properly.

In worst case, you can take help from the WD support professional or alternatively, can ask for returns if the hard drive is in warranty.

Good luck though!!
 

http://www.techspot.com/community/topics/external-drive-not-recognized-despite-my-day-long-attempt-at-google-fu.205135/
Relevancy 15.48%

I have this flash drive:
http://www.amazon.com/PNY-Turbo-Performance-Drive-P-FD128TBOP-GE/dp/B00FE2N1WS

And I am afraid it is dead. When I plug it in, 50% of the time, the red light constantly flashes at about 8 flashes a second, or flashes 3-4 times quickly before just shutting off and nothing happens.

If it is in constant flashing mode, I can open my windows explorer and see "Removable disk", however it is slightly transparent, and when I try to open it, it says "Please insert a drive", which leads me to believe the computer detects it, but can't read it. The properties window shows 0 bytes. Is there any hope at all of getting my ~65gb of used data off of this thing at all? Do I have to take it apart and do some soldering? Please help.
 

A:PNY 128 GB Flash Drive not working

Your flash drive probably has a damaged controller. If that data is important, best chance of retrieving your data would be a professional data recovery service. The cost of recovery depends on how extent is the damage of your disk.
 

http://www.techspot.com/community/topics/pny-128-gb-flash-drive-not-working.204524/
Relevancy 22.79%

Hey there, this might sound crazy. But as I was partitioning my micro sd card. I decided to remove the partition. And when I did that. It is now undetectable by my laptop or any laptop for thaf matter but I formatted the card on my phone, and it works for my phone. But not my laptop. I am trying to partition the sd card because I am using it to store files from my internal rooted phones memory to the sd card internals. I really need help badly! Is there any way you can help?
 

http://www.techspot.com/community/topics/problem-after-removing-partition-on-sd-card.204906/
Relevancy 15.05%

So, when I built my PC I installed the OS on a HDD drive with the thoughts that I could later transfer it to SSD,

(did it before using hard drive cloning software to copy the OS drive to a new drive and then once working formatting the old drive.)

however when I started doing some reserch on cloneing software I noticed that windows 7 might not be cloneable (my past experiances are with XP) since there are mixed reviews on each bit of software out there both on Amazon and on the web. sevral report that windows 7 sees the clone as an unlicenced copy and refuses to boot. others say the clone drive misses it's boot file.

can some people advise me on if any of these facts are true or not?
 

A:Hard drive migration to SSD questions

Hi.
Cloning should work fine if you do it properly with windows 7. It's possible that windows can throw up a licensing issue, but very unlikely. In the event that it does, call Microsoft and they should be able to get it sorted out for you.

As for the bootability of the drive, cloning the drive's data does not necessarily make it bootable, but if you look online you'll see some cloning tutorials that include a section for rewriting the MBR on your SSD to make it the primary bootable drive in case it ends up not booting properly. This isn't hard to do and usually isn't a necessary step.

Also just keep in mind that simply cloning the SSD will probably result in an unaligned drive, so make sure that you get it properly aligned. Some cloning software has an aligning option built into the cloning process that you'll want to select.

So go for it and come back if you're having any issues.
 

http://www.techspot.com/community/topics/hard-drive-migration-to-ssd-questions.204382/
Relevancy 17.2%

I decided to upgrade my old hard drive to a new hard drive. When I tried to install Windows Xp on the hard drive it wouldn't let me. I have a Dell Xps 400 bought back in 2006.
The new HD is a WE 1tb. The error codes comes when I try to install windows xp on the hd. It says

I got a blue screen error after clicking enter at the screen where there is no partition found:
Check to be sure you have adequate diskspace. If a driver is identified in the stop message, disable the driver or check with manufacturer for driver updates. Try changing video adaptors.

Check with your hardware vendor for any bios updates. Disable bios memory options such as caching or shadowing. If you need to use safe mode to remove or disable components. Restart your computer, press f8 to select advanced startup options, and select safe mode.

Technical information:

Stop:0x0000008E (0X0000005, 0XF7419CAD, 0XF6FF17E4, 0X00000000)

Setupdd.sys ? address f7419cad base at F73ED000, datastamp 48025277
 

http://www.techspot.com/community/topics/error-on-trying-to-install-new-sata-hd.204857/
Relevancy 15.48%

Okay, okay, I know that most of you stopped using floppies long ago. But my question is: I was about to buy a Buslink external USB floppy disk drive (brand new, still sealed) from someone on Craigslist, and just wondered if it's a decent brand.

And would have I have by anything extra, other than perhaps a cord? Never done this before.
 

A:Is Buslink an okay brand for an A-drive?

I'm sure it is fine, the technology in those hasn't changed since about 1992, lol. The only thing that is different is the USB interface. The drive alone should be enough, I don't think USB Floppys needed external power.
 

http://www.techspot.com/community/topics/is-buslink-an-okay-brand-for-an-a-drive.204731/
Relevancy 15.05%

Hi, I have a Verbatim Store n' go ex hard drive which used to work perfectly with usb 3.0 and 2.0. A few weeks ago it stopped working with 2.0 and now not even with 3.0. When I plug it in the hard disk starts to rotate and lights up normally, but is never shown on the drive list. The computer doesn't even do the beep sound when a usb device is connected. I tried on 2 different pc's but they show no result.

Any kind of help is greatly appreciated
 

http://www.techspot.com/community/topics/external-hard-drive-failure.204788/
Relevancy 16.77%

I an trying ti install a video graphics card, when I plug in to my pci ex slot and plug in the leads the screen does not work, but the computer does, now I see that I have a pnp monitor but the card and a vga adapter on it, I have tried everything possible but cant get to work, anyone any ideas?????????
 

http://www.techspot.com/community/topics/trying-to-install-nvidia-quadro-nvs-259-on-windows-7.204678/
Relevancy 15.05%

Hi Frnds

I hav a Toshiba 1 TB external HDD. It was working fyn till today. Now it is not showing in My Computer or Disk Management. It does make the sound when I connect or disconnect it from the laptop. and the HDD light remains on.

Please advise how to fix this

Thanks
 

A:Toshiba external USB hard drive not detected in any laptop

Go under the Device Manager and uninstall all the USB Controllers then reboot your PC don't connect the 1 TB just yet. Make sure nothing is connect to those ports like a keyboard or mouse otherwise they'll lockup. Once rebooted Windows will rebuild the table for USB Controllers. Now you should be all set. Unless you have some sort of conflict with IRQ or Registry setting. There is a free app called USBDVIEW what you would do is disconnect from all non-disconnected USB devices that are stored on the PC these settings can cause all sort of issues.
 

http://www.techspot.com/community/topics/toshiba-external-usb-hard-drive-not-detected-in-any-laptop.173740/
Relevancy 37.41%

My bother had deleted my laptop partition files and folders when attempting to extend my C partition. All my stored partition movies were lost and could not be found in Recycle Bin. Do you know where these partition videos are? I really want to view these videos again. What can I do to rescue them? Thank you for any advice!
 

A:Delete hard drive partition data

Hey, Luminaton03!

Sorry to hear you are experiencing such an issue.
Your data is stilll there somewhere as long as you don't overwrite it. If you save new data, it would rewrite your previous files.
I did some research for you and I found a threat that you might find helpful:
http://answers.microsoft.com/en-us/...back-the/a003d747-b760-42a7-819b-0235e8ec6d2c

I really hope this works for you!
Good luck!

SuperSoph_WD
 

http://www.techspot.com/community/topics/delete-hard-drive-partition-data.204583/
Relevancy 22.79%

As you can see from the screenshot, somehow I have acquired a partition of unallocated space of approx 195 GB...I want to delete this partition, adding the extra GB to my main, OS:C partition, but I cannot figure out how to do it...Can someone help? Thanks a lot,

Steve in Kansas
 

A:Deleting Unallocated Space Partition

It is already deleted, that is why you can't.

What you can do is grow your C partition into that space (forget whether it is called merge or grow or expand).
 

http://www.techspot.com/community/topics/deleting-unallocated-space-partition.204138/
Relevancy 15.05%

Hello,

Is there any difference between software which are used for recovering data from HDD or flash memory drives and SSD? For example, can we use of the apps used for HDD to recover data from SSD too?
 

A:Solid state drive data returning

I do not see why the HDD programs shouldn't work for SSDs. Maybe @jobeard can weigh in if I am wrong. I would check out this article.
 

http://www.techspot.com/community/topics/solid-state-drive-data-returning.204388/
Relevancy 38.27%

I'm trying to partition my hard drive, when I click shrink, it takes me to the shrinking window and it says:

Total size before shrink: 704749 MB
Size available to shrink: 7185 MB
Enter the amount of space to shrink: 7185 MB
Total size after shrink: 697564 MB

I don't understand how I have so much space, but I can only shrink it 7185. It is an NTFS.
Here's some screenshots
 

A:Why can't I partition my hard drive more?

Some files that are read only are preventing you from shrinking beyond a certain point while those files are open.

My suggestion would be to use partitioning software that is bootable. Boot to the disk and shrink your partition without windows running.

There are several freeware apps available to select from. The one I use is Partition Wizard Boot CD.
 

http://www.techspot.com/community/topics/why-cant-i-partition-my-hard-drive-more.204093/
Relevancy 15.48%

My hard doesn't show up anymore.when I plug it in I hear 2 beep sounds coming from it and then nothing.any one now what the problem might be.
 

A:WD external Hard drive

Probably an internal hardware failure on the drive. Hope you had your data backed up from that drive.
 

http://www.techspot.com/community/topics/wd-external-hard-drive.203951/
Relevancy 17.63%

Okay next Monday (July 21st) I go in for a hernia operation, I am going to be laid up for awhile and thankfully I have a laptop I can use while recovering upstairs in my bedroom. I can access my Netgear router but the signal is not that strong (bedroom and downstairs office are on opposite corners).

So I have been pondering getting either an Access Point or a Extender for the upstairs but there are so many to choose from I am not sure what to choose nor what brand because the reviews are strongly mixed regardless of who the manufacturer is.

My Needs:
1. Both 2.4 GHz and 5.0 GHz. I've looked at this one but I am not sure: http://www.amazon.com/gp/product/B0...pf_rd_t=101&pf_rd_p=1688200382&pf_rd_i=507846

2. Something simple to set-up.

3. It must work with WPA security. The above one I linked to, after firther research does not do well with WPA.
 

A:Access Point or Extender for Upstairs Wireless?

Really NEED 5ghz? dual band systems seem to impact the reliability AND the distance reached.
You could lock it down to use only 2.4Ghz and improve the reliability.

I solved my distance issue using an EoP device and then any WiFi router at the remote end.
That's TWO purchases; The EoP master/slave pair to get wired access into the remote location and then the WiFi router itself. I've always been partial to Netgear and bought their EoP.
 

http://www.techspot.com/community/topics/access-point-or-extender-for-upstairs-wireless.203893/
Relevancy 15.05%

Tried just about everything but I still can't seem to get my external hard drive to show up in my disk management or computer. It say it's installed and ready to use but I don't see it.. only in the device manager and in devices and printers I can see it.. but nowhere else.. I'm working with windows 7 upgraded from windows xp but has be downgraded which was originally windows vista I think.. A friend gave me a computer and I had it upgraded.. can any one help me get my computer and external hard drive straight. Thanks.
 

A:Don't see my external hard drive in disk management or on computer

Check this thread out: http://goo.gl/rxkBN
 

http://www.techspot.com/community/topics/dont-see-my-external-hard-drive-in-disk-management-or-on-computer.203836/
Relevancy 14.62%

The Seagate Momentus 5400.6 hard drive I'm using is from my old laptop it has 4 disks.
After I put it in the (IT-CEO IT-700) enclosure, and connect it to my new laptop it does not show up in 'My Cumputer' and 'Disk Management', but displays in the 'device and printer' section of control pannel.
I also can't eject the hard drive, even when I'm not doing anything to it, the (IT-CEO IT-700) enclusre's blue signal light just keeps flashing for a while then goes off for a sec, then resume flashing again.
My laptop also keeps trying to install the hard drive.

I tried reinstall the hard drive's driver, but that did not solve the problem.

Please Help.
 

A:External Hard drive not showing up in 'My Computer', and 'Disk Management'

Have you tried using different drive enclosure other than the IT-CEO IT-700?
 

http://www.techspot.com/community/topics/external-hard-drive-not-showing-up-in-my-computer-and-disk-management.201875/
Relevancy 15.05%

I have a Dell Precision T which I just purchased off of Ebay Recognized Possible Hard Formation, Second Not Drive Raid It came with gb of ram and gb hard drives installed In quot my computer quot it shows drive quot c quot but not the second drive This computer supports raid configurations but when I received it it had no operating system installed I installed windows ultimate bit This computer has quad core processors and I have been noticing a Possible Raid Formation, Second Hard Drive Not Recognized slower response time lately which leads me to believe it may be in one of the raid modes even though they are supposed to be faster most of the time Possible Raid Formation, Second Hard Drive Not Recognized I went into the bios and the setting it is on is to automatically detect raid configuration in the drives and if not detected the regular mode I read some information about raid setup and cannot find the software quot Intel Matrix Storage Console quot on the computer to help verify or change settings Could this be an extra program like drivers that are downloaded from the Dell website because they don t normally come with a regular windows install If someone is familiar with configuring raid formations could you please help me determine what my system is set on and how to set it properly I would be satisfied to not have raid active as I don t need that kind of constant backup My work is not that important I can back up important files in other ways nbsp

A:Possible Raid Formation, Second Hard Drive Not Recognized

What shows up in the Disk Manager vs the Device manager?
 

http://www.techspot.com/community/topics/possible-raid-formation-second-hard-drive-not-recognized.202015/
Relevancy 15.48%

My External hard drive wont open without format I try doing format it gets stuck I try opening computer > mange > disk management it wont open unless I take it out and gets stuck and gives me connecting to virtual disk service
please please help me! im freaking out I need this hard drive to work I need help
 

A:External hard drive

If you need this drive because there is data on it, formatting is the last thing you want to do.
 

http://www.techspot.com/community/topics/external-hard-drive.203628/
Relevancy 27.95%

Ok I m not the best and building computers and am very new at it My fresh build will boot but display absolutely nothing on the it like except everything Fresh display all powers at should build, no on monitor monitor by nothing I mean it won t even go to bios or turn the power light from standby to on This build will boot up all fans will run with no problems including cpu and video card fans and everything will shut Fresh build, everything powers like it should except no display at all on monitor off by holding down the power button properly Also I have not gotten any light or beep codes Here is what I have asus m a motherboard amd fx -core processor black edition asus gtx ti direct cu video card ddr gb Fresh build, everything powers like it should except no display at all on monitor x gb MHz dual corsair vengeance ram watt xion xio power supply sata tb barracuda hard drive dvd cd - writable drive cm storm scout case I have tried trouble shooting programs for the motherboard and video card with no results I have tried resetting the rtc ram I have double checked the power plugs are plugged in properly and making a proper circuit I have taken everything out except the motherboard cpu cpu fan and power supply and still gotten no beeps I have tried changing how the stupid speaker wire connects connecting incorrectly according to the manual and still no freaking beeps I have tried using hdmi and vga cords connected to my tv that supports pc s and a monitor nothing worked cord wise but my old pc worked like a dream when connected to them when talking to tech support for the motherboard they helped me check that it wasn t a grounding issue I have talked to all my pc buddies called tech support and no one can tell me anything i haven t tried or that has worked I have no idea what is wrong I need help I have spent the last two day all day working on this with no clue what is happening nbsp

A:Fresh build, everything powers like it should except no display at all on monitor

do you have the monitor cable plugged into the GPU or MOBO?
 

http://www.techspot.com/community/topics/fresh-build-everything-powers-like-it-should-except-no-display-at-all-on-monitor.178244/
Relevancy 15.05%

Recently a hard drive named OS (X: ) (space inserted so it isn't posted as a smiley face) appeared in my computer. It seems to be identical in memory to my actual hard drive, but is actually empty. What exactly should be done about this?





 

A:Empty extra hard drive?

Not sure off hand but I'd open up Disk Management to see what it says there.
 

http://www.techspot.com/community/topics/empty-extra-hard-drive.203533/
Relevancy 18.06%

Someone help me please cannot access but can cable LAN wifi internet My It s urgent Windows IP Configuration Host Name kent-PC Primary Dns Suffix Node Type Hybrid IP Routing Enabled No WINS Proxy Enabled No Ethernet adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description My wifi cannot access internet but LAN cable can Atheros AR PCI-E Gigabit Ethernet Controller NDIS Physical Address - -A -AF- - E DHCP Enabled Yes Autoconfiguration Enabled Yes Wireless LAN adapter Wireless Network Connection Connection-specific DNS Suffix Description Atheros AR WB- NG Wireless Network Adapter Physical Address - -CA- - - DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe a e b ec Preferred IPv Address Preferred Subnet Mask Lease Obtained June Lease Expires June Default Gateway DHCP Server DHCPv IAID DHCPv Client DUID - - - - -D - C- - - -CA- - - DNS Servers NetBIOS over Tcpip Enabled Tunnel adapter isatap CB C E- EC - E - CD- BE B CDC Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter isatap AA FDD -F C - BD - D -CEDB F Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Microsoft to Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Teredo Tunneling Pseudo-Interface Media State Media disconnected Connection-specific DNS Suffix Description Teredo Tunneling Pseudo-Interface Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes nbsp

A:My wifi cannot access internet but LAN cable can

Are there any yellow (!) in the device manager?
 

http://www.techspot.com/community/topics/my-wifi-cannot-access-internet-but-lan-cable-can.203495/
Relevancy 15.05%

Hello,

Old Dell computer running Windows XP that was never backed up and I am trying to recover files and photos. I get NTLDR is missing when I boot. I've used Testdisk/Photorec to try to recover my data but when going through the recovered data it seems to be all system files that I know nothing about. I used Ubuntu on the Dell to run Testdisk. I also hooked up the hard disk to my laptop with a hard disk adapter and got the same results.I also ran a NTLDR boot disk but ended up with the same NTLDR is missing message. I dont have a XP recovery disk. Anybody that has had this issue please help!
 

A:NTLDR is missing. Hard Drive Failure.

Trobles86 said:





I also hooked up the hard disk to my laptop with a hard disk adapter and got the same results.Click to expand...

If you have access to another PC or laptop then you can connect the hard drive in to that machine and get the files you wanted to recover from your hard drive in there.
 

http://www.techspot.com/community/topics/ntldr-is-missing-hard-drive-failure.203104/
Relevancy 22.79%

I finally bit the bullet and upgraded yesterday Before installing the new OS I installed g of ram gb sticks Got thru all the installation BS my goodness Microsoft eats up a from Upgraded XP to Win7 lot to memory with all those updates Any way I was checking out the specs on my systems on the My Computer page and it only shows that I have g of Ram The other problem is I have a gb but it s only showing that I have gb total I know you want my system info so I ll do Upgraded from XP to Win7 the best I can AMD Athlon tm X Dual Core Processor Ghz bit I m going to check out my memory sticks Maybe one of them isn t seated properly I have them side by side as it was shown in my MB book but was wondering if I should skip a slot Also is there something I need to do about my drivers I m really worried about my HD space I know before the guy who built my system had a partition put in That got wiped out when I tried to to a repair on my Windows XP and had to do a clean install When I got the system back up and running it showed all my HD space now I m barely showing a third of the space that should be there I m really at a lost nbsp

A:Upgraded from XP to Win7

Well since no one is answering, I'll get you up to date. I found my lost HD memory and got it all back, so I'm at full capacity there. As for my sticks of RAM, I just don't know. I removed one, but the system wouldn't boot. Then I put the other one in and the system still wouldn't boot. So I put them both back in and the system booted right up. I'm getting the feeling that I bought 2 2gb or ram and ended up with 2 1gb sticks. Also, I thought the system was suppose to recognize when you put new ram in. Mine didn't.
 

http://www.techspot.com/community/topics/upgraded-from-xp-to-win7.203160/
Relevancy 15.48%

Hello I have just removed much malware and viruses from a computer with windows vista. It is still running slow from time to time, having problems with freezing on the internet and I thought maybe by defragging it would fix the issue. Yes I have reset firefox many times, scanned many times fully for viruses and malware, removed and reinstalled flash player, etc. I need to first backup the C drive only because the D drive is full of crap. I cannot afford to do anything other than DVD-R to store it on. I am trying to find out how to do this. Is anyone familiar with such a process?
 

A:How do I backup C drive from Vista to DVD-R?

First, run CLEANMGR for each login on the PC and that includes Administrator.
This reduces the amount of data captured to at least active & meaningful.

Second, IMO backup \Users and forget all else
 

http://www.techspot.com/community/topics/how-do-i-backup-c-drive-from-vista-to-dvd-r.202672/
Relevancy 22.79%

After updating the Windows XP to Windows 7, my computer becomes really slow and recently often receives a low disk space message. And there is only 3GB of free space left on my system partition. So, I think it is the time to extend my system partition space. But, I am not so familiar about the partition expanding things and don?t know what to do. Do you have any idea for me? Please, give me some suggestions! Thanks!
 

A:Computer partition space problem

Can you post a screenshot of Disk Management, so we can better understand what you are dealing with?
 

http://www.techspot.com/community/topics/computer-partition-space-problem.203271/
Relevancy 15.05%

I have 64bit Win7 Home. My C: boot drive is a 120GB SSD with most of my programs installed on an ordinary HDD, saving the SSD for frequently used stuff.

I bought a duplicate SSD (same brand/size/model) for the purpose of creating a Raid-0 array.

I've backed up everything on my SSD, but how do I restore it once I setup the Raid?

Thx.
 

A:Moving single C: drive to Raid-0

Copy/paste?

Or create image of the SSD, then apply it to the raid partition.
 

http://www.techspot.com/community/topics/moving-single-c-drive-to-raid-0.203051/
Relevancy 15.05%

I am a beginner of hardware. I find two series of SSD to compare, 840 EVO and M500, because the specifications and the prices of them are approximate.

Both of them use SATA 3, so you need to compare with the read speed and the write speed, if you prefer faster one. The sequential read speed of 840 is 540MB/s, and the sequential write speed is 410MB/s. M500 is slower, but the performance of M500 is great as well, its Shock-resistant design makes it more durable than 840. The most important thing of SSD is the controller, 840 uses 3-core Samsung MDX controller, M500 uses Marvell?s latest controller, maybe the second one is better.

This is my poor review, how to compare them with more details, give me your advice.
 

A:The comparison of hard-state-drive, Samsung VS Micron

Read in-depth reviews such as this:
http://www.techspot.com/review/709-samsung-840-evo-ssd/
 

http://www.techspot.com/community/topics/the-comparison-of-hard-state-drive-samsung-vs-micron.202945/
Relevancy 16.77%

Hello all,

I've recently bought a HP Pavilion 15-n252sq laptop, with Free Dos - unfortunately I can't install Windows 7 over it, due to the following error I keep receiveing in the Installation screen:

"Select the driver to be installed" - and regardless of the paths I have and the available folders, I can not seem to proceed wtih the W7 installation.

Please notice that, I've tried to use both a W7 DVD and also a bootable USB drive (and yes, connected in the USB 2.0 port and not USB 3.0 ) - but I always get to the same point where I have to select drivers.

Please also notice that the BIOS doesn't allow me to make any modifications except for some minor ones (like select boot priority, or enable USB 3.0), as the rest of the MAIN features are greyed out .

Can anyone please help me with this issue?

Regards,
Adrian
 

A:HP Pavilion 15-n252sq - Can not install Windows over Free Dos

You may have to use a program Like KillDisk to reformat the drive. Then try installing your Win 7 DVD.
 

http://www.techspot.com/community/topics/hp-pavilion-15-n252sq-can-not-install-windows-over-free-dos.202523/
Relevancy 15.48%

Hi Im new here and im hopeless hope u can help me, !st sorry because I cant find in forum on my problem. well here it is..

I have Samsung 900x New series 9.0 Usb slot is 3.0. just a simple problem but for me its big problem, I cant install any of my 6 pcs usb all is 2.0, It detect yes in device manager but cant install while im updating driver so my laptop can install what usb I inserted, It says error code 28. acess denied, so I cant install any of my flash drive including my external hdd 500gb, pls can someone help me.. I already search to google but non of it helps.. Thanks very much! hope to hear from you guys,
 

A:USB Flash Drive U2 to U3 slot

Can you please provide more specific information of your laptop's specifications and operating system used.
 

http://www.techspot.com/community/topics/usb-flash-drive-u2-to-u3-slot.201977/
Relevancy 15.48%

Hello all!!!! My name is John. I am trying to find some help with an issue that arose after I installed a new hard drive in my computer. I started getting a message that stated:

C:\Users\Owner\App Data\Local\Conduit\API Support\API Support.dll

Anyone know how I can repair this? I saved an image of my system before installing the new hard drive and then just downloaded the image to the new hard drive. HELP!!! please!!
 

A:Installed new hard drive

You might just need to run some registry cleaners to fix and remove those corrupt registry keys.
 

http://www.techspot.com/community/topics/installed-new-hard-drive.201991/
Relevancy 15.05%

My computer recognizes that the hard drive is there as local disk E but wont actually load. I can get it to load on my tv but it wont play my movies. Please help it has a lot of important things on there,
 

A:External Hard drive not loading

You could try running chkdsk /f in command prompt to check and fix errors on your drive.
 

http://www.techspot.com/community/topics/external-hard-drive-not-loading.202166/
Relevancy 15.05%

I have had a look round the posts but nothing I try stops the internal drive getting accessed.
I have unchecked the CD autorun using TweakUI (this worked for someone else)
I have temp disabled AVG along with BoostSpeed and Team Viewer
The only process running apart from sys idle is svchost.exe (1%)

I hope someone out there manages to work their magic as they did the last time I posted here!
Thanks
 

A:Hard drive light flashing with nearly no processes running

Sounds like the System Index service is running.

When you find that happening, disconnect from the Internet to be sure MS Update is not running or something on your system is phoning home to be sure.

To see all Internet connections from your PC, grab a copy of CurrPorts - - runas admin and you will see everything. Click on the column heading Remote Host Name to get active connections at the top if the list. The menu Options is used to customize the display; here's my list

display Listen, Established, TCP, UDP, IPv6,

display port in The Address,

sort on refresh,
Ask Before Any Action
That last one is interesting; running as admin, you can Close a port or Kill the application with that port.

CurrPorts identifies all ports on the pc (mine number 112 as I write) and if I select all ports with a Remote Address, I see I have 20 connections.

btw: Remote Addresses shown as 127.0.0.1:nnn are local services (like a proxy or AV service), so out of the 20, only two are actually remote - - both HTTP browser connections.
 

http://www.techspot.com/community/topics/hard-drive-light-flashing-with-nearly-no-processes-running.202265/
Relevancy 15.48%

Hello. recently I have been getting the Drive e needs to be formatted before it can be used. However, I have no drive e. there are no flash drives or sd cards plugged in, its a laptop so it has the normal c drive and the system d drive (ie 1 hard drive). I have no dvd drive as I have removed it because it has been causing problems. in disk management it has drive e there, but no name to it and it is in the raw format. any idea as to how to remove this nuisance?

Windows 7 32 bit pro
hp pavilion dv6700 laptop
 

A:Format drive E

Just format it, you shouldn't get further prompts. Then you can see if it's another partition on your main HDD or not.
 

http://www.techspot.com/community/topics/format-drive-e.201098/
Relevancy 15.48%

Hi, I have problem with my flash drive. It just won't load, I tried everything, and still nothing.
Here is some pictures that can help.. I think..








 

A:Problem with Flash Drive

Windows installs multiple drivers for this device. This is the 2nd driver (that's failing to install). The first will be listed under USB in Device Manager. By default, Device Manager only displays a device when its connected.

Plug in/remove your device and look for a device appearing/disappearing under USB. It'll probably be a USB Mass Storage device. (Maybe a USB Composite). When you find it, right click it Properties->Details tab. Use the pull down menu to select Hardware IDs. Copy/paste what you see in your next post
 

http://www.techspot.com/community/topics/problem-with-flash-drive.201684/
Relevancy 15.48%

Greetings all The DVD RW drive on my HP Pavilion dv series us is not working Please find the relevant details below The drive is Model TS-L N HPMH - I think this is Toshiba It s detected in My Computer as HD-DVD ROM When I try to play a CD DVD the light comes on and spins but then shows quot Please insert drive not as DVD ROM CD working - shown a disk into HD DVD-ROM Drive F quot DVD drive shown as CD ROM - not working The Device Manager detects it DVD drive shown as CD ROM - not working as a CD ROM and obviously the Windows generic driver doesn t work The Device Manager picks it up as an quot Unknown Device quot and is shown as quot NCB XYB QNKX SCSI CdRom Drive quot The driver is not available on the HP site so tried the regedit option I believe I deleted all the strings associated with the driver key Then tried the Microsoft tool which must have installed the generic driver which causes the DVD drive to be recognised as a CD ROM instead I tried the sfc scannow as well and it shows that there are corrupt files which could not be fixed The laptop works well otherwise Please help Where can I find the driver for the drive How can I go about fixing this issue nbsp

A:DVD drive shown as CD ROM - not working

List any Problem devices

Make sure devices are connected and powered on
Click the Start Orb, type msinfo32 in the search box. Hit Enter
Click the + sign next to Components to expand it
Click Problem Devices. Anything appear?
If yes, click on it, Ctrl-A to select all, Ctrl-C to copy it, Ctrl-V to paste into next post
On the other hand, if no devices are listed, tell me so

 

http://www.techspot.com/community/topics/dvd-drive-shown-as-cd-rom-not-working.201725/
Relevancy 15.05%

I have to say I am a little worried about my hard drive. Often I bought it for the purpose to protect my game videos, and some program files. For a long time, it behaved rightly with my HP windows 7 desktop when directly used. Sometimes ago I decided to let this old PC alone and bought a Macbook pro. The latter has no such a SATA interface for me to input the data from this drive. For the convenience, I borrowed this SATA dock from my brother . ( I have to admit previously I once use another dock to exchange the data . )

My mac just could not recognize my drive as a normal one. I am not sure where the problem lies in. The key is that other drives have no similar issue with this dock. I wonder if anything happen before in the process I handle the data with another dock.

Grateful for any advice.
 

A:Previous WD hard drive 500GB could not be recognized as it always

Yeah. At present I have no such another one to have a try. I will turn to my friend see if any gadget he has to test my drive.
 

http://www.techspot.com/community/topics/previous-wd-hard-drive-500gb-could-not-be-recognized-as-it-always.201163/
Relevancy 15.05%

Okay not really very good at this but my laptop stopped working so I took hd out and connected it to anotherlaptop through usb lead it appears in my disk management (although it shows up grey instead of black or blue if that makes sense to anyone) but it wont show in my computer I have a load od family photos on this drive and would really love some help and will send out good karma to all who try to help me many thanks in advance
 

A:Trying to recover data from crashed hard drive

Hi techmichellenot. When you say it stopped working,is there anything on the screen when you power up, or any indication that the system passed it's POST procedure (Power On Self Test), usually indicated by a beep before Windows itself tries to boot up?. Any error messages seen?. Sounds like you put the drive in an external case that can connect via USB. If there is indeed a problem with the disk drive and it's not a physical problem with the drive (maybe a corrupted Windows boot file,etc),your system may have a Recovery procedure that will reinstall your OS without erasing your data files (called a non destructive OS reinstall) as opposed to a destructive which erases everything and reinstalls the OS. I would check your documentation to see if your laptop has such a procedure.
 

http://www.techspot.com/community/topics/trying-to-recover-data-from-crashed-hard-drive.189487/
Relevancy 17.2%

Hello all,

My friend has a Canon 3-in-1 MF 4010 (Printer-scaner and copier) device. He has lost the manual. Now, how can I see whether is it installed on the machine (Windows 7 32-bit) or not? And if it's not installed how to install it?
Thank you.
 

http://www.techspot.com/community/topics/how-to-install-the-canon-mf-40-10-3in1.201448/
Relevancy 15.48%

Hi all!
C drive on my computer is almost full, I keep receiving notifications regarding no or less space in C drive. I have Partitioned my hard disk into 3 parts.
C drive is only 25 GB :/
D drive is 80 GB
E is close to 150 GB

I would like to increase my C drive space from 25 GB to 100 GB cutting E drive down . I am unable to do so through disk management. The option Extend Volume is grayed out. Please suggest an alternate way to increase the volume of my C drive. The OS I have is Windows 7 ultimate!!
Thank you in advance.
 

A:How to increase volume on C drive

0. Make sure you have everything you can't afford to lose backed up.
1. Get Easeus Partition Master (the free one for home use)
2. Shrink E
3. Expand D
4. Shrink D
5. Expand C

Partition Master may let you just shrink E and expand C, but if you have a traditional partition layout the steps I listed will have to occur (even if PM hides the middle ones).

Personally, I would do 1 step at a time and reboot between each. This way if something goes wrong your chances of recovering are much greater.
 

http://www.techspot.com/community/topics/how-to-increase-volume-on-c-drive.200779/
Relevancy 17.63%

Hi been awhile since I last posted. In the house we have a desktop and 2 laptops on the go in the house.The desktop is wired internet while the laptops are run on wifi.This worked fine until my isp UPC upgraded my internet speed from 50mb to 120mb.. The desktop and one of the laptops still works fine but the acus laptop has web access for between 20 mins to 45mins before the wifi drops off and becomes limited access. The wifi needs to be renabled to regain access to the wifi which lasts another small while until it gets limited access again.

The laptop specs are:
Acus K53e
Windows 7 home premium 64bit
intel Centrino N100 wifi adapter
Ram 6gig

At the moment its running for 30 mins then wifi cuts off for a few seconds before starting up again.
 

http://www.techspot.com/community/topics/laptop-gets-limited-access-after-period-of-time.201028/
Relevancy 15.48%

Do you know how to increase my C drive without deleting some important data or programs? In fact, yesterday, when I attempted to install a newly download program, a message popped out and told me there was a low disk space problem. I had also checked my C drive space. There was really 597MB of free space left. So, I just want to increase this drive successfully. Do you how I can do that? Any advice could be greatly appreciated here. Thank you!
 

A:How to increase my C drive without deleting something?

Open up My Computer and tell us if there is any available space on another hard drive.
 

http://www.techspot.com/community/topics/how-to-increase-my-c-drive-without-deleting-something.200953/