Windows Support Forum

new build - no power to CPU i5 3450

Q: new build - no power to CPU i5 3450

Hello,

Just in the process of building a gaming rig but having problems getting the computer to power up.

Details
mobo - gigabyte Z77-D3H
Processor - i5 3450
Memory - Kingston hyper x DDR3 1600mhz CL9
PSU - powercool x-viper 450W and generic 650w
case - Zalman Z5
Hard drive - Kingston hyper x 3k SSD 120gb

Info
- Tested powercool PSU using antec PSU tester - pass
- Changed over to generic 650w PSU with no power on button. plugged in and hit case power on button to make sure that i had all the connectors in correctly. PSU fans powered up but still nothing through the CPU, no fan, no post.
- removed motherboard from case (possible shorting issues??) again PSU powers up but nothing from the CPU or fan and no posting bleeps?
- added post test card but returns 00 no errors.

Help and comments appreciated.

Relevancy 100%
Preferred Solution: new build - no power to CPU i5 3450

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: new build - no power to CPU i5 3450

Check the 24 pin power connector to make sure its being fully inserted. Same way with CPU Power (8 pin).

You can get a false positive with a PSU tester as it does not test the power supply under load. You could have the correct voltages with no load but under load one or more voltages could fail.

http://www.sevenforums.com/installation-setup/287977-new-build-no-power-cpu-i5-3450-a.html
Relevancy 64.93%

Considering I have a core i5 3450 and hd 6870 along with 8 gb RAm,500 gb HDD and 22" LCD.
How much power supply do I need?? I already have 450 W
 

A:Power supply for i5-3450 and HD 6870

AMD Radeon? HD 6870 Graphics requires a 500W power supply.
 

http://www.techspot.com/community/topics/power-supply-for-i5-3450-and-hd-6870.187099/
Relevancy 61.92%

Dell Latitude 3450
Windows pro 7
Brand new HDD Solid state
A little over a year old (HDD died 9 days out of warranty....of course!)
 
Began acting strange again (maybe tied to prior to the HDD crash - not sure) a few days ago - it would reboot out of the blue or upon boot-up would get the login screen and then it would go black instead of loading the desktop.  Got error messages of corrupt file and disk read error yesterday.  Went through ePSA and was able to get it up and running - but something is seriously going on with this!  This is my husband's but I can remote into it - did last night and wandered around in the event viewer - but not knowing what I was doing in there - just saw many "critical" errors listed with Kernel 41....
 
Any suggestions on how to figure out what's going on?  
 
Pam
 

A:Dell Latitude 3450 Kernal-power 41 - random shut downs

Event ID 41 errors are simply Windows way of saying it doesn't know why it shut down.  Here's a link with more info:  http://support.microsoft.com/kb/2028504 As this is an SSD, there's not much in the way of tests.  There is a suggested tool for SSD's a bit down this page:  http://www.carrona.org/hddiag.htmlBUT, I'd suggest that the first thing to do is to backup all the critical data.  If this is a failing drive, you may not have much time to recover the data before it completely dies. Then, try another hard drive and see how that works.  They're fairly cheap these days - and you can even find stores that will let you return them if they're not needed (for your money back).If the new hard drive works well, then you can presume it's the SSD that's failing.If it doesn't work well, then you'll have to start checking cables and connections. We can help a bit if you can generate these 2 sets of reports:1)  Please run this report collecting tool (even though you may not be reporting BSOD's) so we can provide a complete analysis:  http://omgdebugging.com/bsod-inspector/When done a Notepad document will open with the name of the file and it's location.By default it'll be a .zip file located on your DesktopSimply upload the .zip file with your next post and we'll move on from there.If it doesn't work for you, then please try this:  http://www.bleepingcomputer.com/forums/t/576314/blue-screen-of-death-bsod-posting-instructions-windows-10-81-8-7-vista/2)  Please do the following:- open Event Viewer (run eventvwr.msc from the "Run" dialog)- expand the Custom Views category (left click on the > next to the words "Custom Views")- right click on the "Administrative Events" heading- select "Save all Events in Custom View as..."- save the file as Admin.evtx- zip up the file (right click on it, select "Send to", select "Compressed (zipped) folder")- upload it with your next post (if it's too big, then upload it to a free file-hosting service and post a link here).FYI - If we're looking for Event ID 41 errors (unexplained shutdowns), there's more info on that here:  http://support.microsoft.com/kb/2028504While waiting for a reply, please monitor your temps with this free utility:  http://www.cpuid.com/softwares/hwmonitor.html 

http://www.bleepingcomputer.com/forums/t/617949/dell-latitude-3450-kernal-power-41-random-shut-downs/
Relevancy 51.6%

Hi, since the power of my Y3P with display at max birghtness does not hold very long it would like to build a powerbank for it. Since the Power Adapter is 20V 2A I wonder if I could put 4 x 5V (2A) Power Banks in serial and have 20V and enough amps to fuel the Y3P. I also ordered a cable with the right plug to connect to the Y3P. However it has 3 wires inside. When mesuaring with a meter one is ground and two deliver about 5V. How could that be? How would you wire it to power the Y3P. Does anyone has any idea?PS: I know this is gonna wipe warranty. 

https://forums.lenovo.com/t5/Lenovo-Yoga-Series-Notebooks/Build-a-power-pack-with-4-5V-Power-Banks-f%C3%BCr-Yoga-3-Pro/td-p/3445652
Relevancy 50.31%

Hello everyone - I have just assembled a new build It will not power up I need a suggestion to figure out if the problem is the case or the motherboard This is a mini-itx build power-up: power New or Build MB? no supply case's The case is New Build no power-up: case's power supply or MB? Linkworld LC - B This case comes with a volt watt external laptop-style power supply that plugs into the rear of the case just like New Build no power-up: case's power supply or MB? a laptop power supply plugs into a laptop - a barrel connector Inside this power connection connects to a power supply component that is not like a regular ATX power supply but is on a printed-circuit board New Build no power-up: case's power supply or MB? mounted on the case This has several capacitors and other stuff From that comes the -pin and -pin power supply lines for the motherboard I assume the -volt power supply for this external power supply unit is right since it came with the case It was watt The processor is an IBM t with TDP of watts Lower-powered CPUs can be put in a small so I assumed the power supply might be under-powered I ordered a -watt volt power supply with the right size barrel - and same polarity pos inside The MB is an ASRock H MV-ITX It is mini-itx form factor Still same problem Everything is connected correctly When I press the power-on button an external CD drive I have plugged-in spins up for a while But no power light comes on in the front of the case there are no POST beeps the fan for the CPU does not spin up No other signs of life So power is getting into the MB - the external CD drive is plugged into a USB socket in the rear panel of the MB After trying a watt and watt power supply I believe the problem cannot be the power supply cord Can it be that I have too little load I don t think so I plugged in another mm fan and an ol-fashion floppy drive just the power connection to add more load - same thing no power-up no POST nothing but the CD drive will spin up when I open-then-close it yet again So here is the help I need what else can I try -assuming the MB and case are fine is it more likely the case power supply is bad or the MB --Thanks nbsp

A:New Build no power-up: case's power supply or MB?

Well, I figured out the problem.
I am planning to re-do the older mini-itx system I have; it has gotten riddled with Trojan software for kids downloading games; it basically has been de-commissioned already.

So, I took the pico-psu power supply from that older computer, and hooked it up to the one I am making. Everything went perfectly.

So, I un-did that, removed the MB from case, disconnected the barrel-power connection from the case, unscrewed and removed the power supply that had been mounted in the case, put the pico-psu power supply back in place (I had to drill the hole for the barrel-connection out to be a little bigger since the pico-psu internal/external connection is threaded and held in place by nut with lock washer), and routed wires to be clear of cpu fan, screwed MB to stand-offs, and closed it all up.

now, everything is great. I like this linkworld case, but the power supply is worthless. I may try to get a few dollars back from the ebay vendor, to make me happy with a case that is less than what I should have gotten, but is working for me; I don't want to wait on returns, etc.
 

http://www.techspot.com/community/topics/new-build-no-power-up-cases-power-supply-or-mb.206259/
Relevancy 46.01%

With encouragement from a friend who works alot with computers I decided to build my own computer this past week as I wanted a desktop but didn t want to spend much money So I bought ATX ILG- PSU MSi H M-E Motherboard MSi R MD H Video Card i - LGA Sandy Bridge CPU and of course a case a had drive and a DVD drive So I put this thing together today Following the motherboard s manual I was pleasently suprised to see that it was very easy to put together Then I tried powering it up and nothing happened I figured it was a DOA power supply so I bought another one Tried powering this one up and nothing happened I do however hear a high-pitched staticy sounding noise coming from the PSU when it s on so I imagine that New build power? - no s the sound it makes when in V standby mode But yeah nothings happening The front panel LED light doesn t even turn on I ve followed the wires New build - no power? to the front of the case and I ve triple checked with the manual to make sure they are oriented correctly in the JFP socket I ve triple-checked to make sure the PSU is securely in both the -pin and the -pin sockets New build - no power? on the motherboard along with being hooked up to the DVD and hard drives So I don t know Is it most likely the motherboard then In my novice stupidity did I somehow accidently introduce it to static electricity and kill it Does static electricity really do that so easily I dunno Boo nbsp

A:New build - no power?

This sounds suspiciously like a dead motherboard. But the noise from the PSU it not something I have heard before.

Strip the PC back to the bare minimum of components so all you have connected is the mobo, PSU, monitor (use the onboard graphics if it has any) and the on/off reset switch. Remove the RAM, hard drive, CD drive/s, keyboard speakers etc. This should give you the POST screen when you switch it on. If it does not do that then the mobo or CPU is faulty. I would then return both of them for replacement.

It is possible that you have accidentally caused some damage from static, you should always earth yourself when touching anything inside a PC and the wearing or a wrist strap attached to an earth point is highly recommended, they are not expensive.
 

http://www.techspot.com/community/topics/new-build-no-power.164812/
Relevancy 46.01%

Hi guys Have started building a new computer I am having problems getting it to boot up at all and the evidence would suggest that this is either a PSU or MOBO issue The PSU provides more than enough all on PC build won't New at power Volts for the MOBO so there is no issue of underpowering here I have used the paper clip test for the PSU and I was able to get the fan to turn doing so The processor is inside the MOBO along with the heatsink and the CPU FAN cable which has been connected to the CPU FAN male connector I have verified that the PSU is connnected that the mains power supply is ok checked it with a lamp working fine and also that all the various connectors such as the ATX headed cable is inserted properly as is the cable I have visually and manually verified that they are all inserted fully and without any gap This is now the second motherboard I New PC build won't power on at all have used I purchased the mobo online from a reputable seller who tested the old one and then sent me a replacement However the same issue has reared its head once again It is also worth noting that I have assembled the computer in a house where there was no carpets or rugs There is wooden flooring and ceramic tiles everywhere I have touched the components only New PC build won't power on at all after grounding myself I am at a loss here guys is it the MOBO or the PSU hour ago - days left to answer Additional Details Do I need to insert speakers for the beeps Don t have any I use headphones Would that work I do not have the video card hard drives or ram inserted or a monitor It is just the PSU MOBO and the Processor Given that the components are NOT within the chassis at present I can safely rule out a short in the circuit In short I am uncertain and unequipped to verify whether it is the PSU or MOBO Please help Given that previously I assembled the entire machine including the video card ram etc installed with absolutely no response I thought it would be better to start from the beginning work my way up and verify that each part was working before moving on nbsp

Relevancy 45.58%

ive just assembled it from scratch but it wont power up surely the PSU should at least power but wont up build, new power pc up when i switch it on buy no nothing happens for testing purposes new pc build, but wont power up i tried pluggin the old PSU into the wall as well but that doesnt even power on i wasnt aware that the PSU had to be connected to the pc hardware to work any ideas also when installing the processor it said to apply thermal grease but i dont have any is this a problem i assume it wouldnt have anything to do with the LED leads as the case i have which has the LED wired differs from the motherboard manual windows xp DABSVAL PSU - creative Inspire T Speakers OEM CRUCIAL GB dimm ddr SDRAM SUMSUNG GB RPM S MB harddrive GeForce GTS MB PCIE XT intel Core Duo E S ghz mb gigabyte S Intel P Express ATX motherboard - there s a cdin socket on the MB Which i could swear has something in it on my old asrock MB should there somethin in there also there s an pin lead which comes out of the PSU but the only place i can see where it fits is the graphics card is this correct heres are the links motherboard - http www dabs com productview asp amp PageMode amp NavigationKey PSU - http www dabs com productview asp Id amp PageMode amp NavigationKey harddrive - http www dabs com productview asp PageMode amp NavigationKey memory - http www dabs com ProductView aspx Quicklinx R L graphics card - http www dabs com ProductView asp gationKey amp InMerch processor - http www dabs com productview asp lectedId amp PageMode amp NavigationKey nbsp

Relevancy 45.58%

My new build wont power on all I hear is a few high pitch sounds coming from what I think is the psu.
My specs:

SSD 128GB SAMSUNG 850 Pro
1TB HDD (from previous build it was working fine 2 days ago)

2TB HDD(from previous build it was working fine 2 days ago)

GPU = GTX 680 2GB (from previous build it was working fine 2 days ago) MSI GTX 970 GAMING 4G GeForce GTX 970 4GB 256-Bit on it's way in the mail.

Case is pretty old and doesnt have a lid but it was working fine with my pervious buid)

PSU = CORSAIR Enthusiast Series TX750 V2 750W ATX12V v2.31/ EPS12V v2.92 80 PLUS BRONZE Certified Active PFC High Performance Power Supply (from previous build it was working fine 2 days ago)

Heatsink = Scythe Ashura Universal Processor Cooler

CPU = Intel Core i7-4790K Haswell Refresh Quad-Core 4.0GHz

Motherboard = MSI Z97-Gaming 7 Intel Z97 Motherboard

Memory = CORSAIR Vengeance 16GB (2 x 8GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory

Please help me
 

A:New build wont power on

Disconnect everything except the monitor, cpu, ram. In fact, go down to 1 stick of ram. Will it POST now?
 

http://www.techspot.com/community/topics/new-build-wont-power-on.206021/
Relevancy 45.58%

I just built my system and the power doesn t stay on so here s my very first post The fans spin about once and the POST shows FF bootup for a half sec then everything goes dead I have to shut off the PSU to try again and the problem repeats I tried the PSU on an older MB and it worked but that may not mean much since the old MB doesn t use the pin power connector only the Unplugging everything but the CPU only comes for sec build, Brand new Power 1/2 on and memory didn t help I Brand new build, Power only comes on for 1/2 sec even tried it w o the memory I also tried it Brand new build, Power only comes on for 1/2 sec with an old PCI video card Same result I m thinking the MB is sensing a short I ll uninstall and do a careful visual check or a missing fan my case fans don t provide a sensor feedback to the CSYSFAN or CPWRFAN connections but my CPU fan uses the pin CPUFAN connector or maybe the MB thinks something s too hot obviously wrong Any other ideas specs AMD EP- NDA J x MB Kingston DDR All-In-Wonder AGP sound on MoBo W PSU DVD RW and Floppy Gregor nbsp

A:Brand new build, Power only comes on for 1/2 sec

Are motherboard stand-offs being used?
 

http://www.techspot.com/community/topics/brand-new-build-power-only-comes-on-for-1-2-sec.25512/
Relevancy 45.58%

The specs will be ASUS A N SLI or ABIT A N SLI abit if the board New Help For build!!! Power Supply ever comes out AMD pin x Ultras vid mem Power Supply Help For New build!!! in sli mode x mb gb Corsair XMS DDR Pc DDR Pc if compatable with Abit Mother Board x gb Western Digital HDDs in Raid x LiteOn CDR RW Combo DVD x LiteOn CDR RW DVDR RW x Floppy x UV Tube x LED Case Fans I was thinking this w http www tigerdirect com applications SearchTools item-details asp EdpNo amp CatId But i would like this one b c of the X-Connect Feature with UV Cables look so nice http www tigerdirect com applications SearchTools item-details asp EdpNo amp CatId My only concerne with the w it that i will not have enough power And i dont know what the quot Effencey quot of the Ultra Power Supplys are And i have seen on newegg com that the quot Effency quot can be as low a So of the power will be gone meaning you dont rilly have w or w So if any one can help me with this thanks in advance Thanks Da Bob nbsp

Relevancy 45.58%

Hi all This question is in regards of what For new Supply? build Power wattage PSU I should use for this build I don t do lan gaming but I do like games I want to play Crysis Case Lian Li V B ThermalTake Armor CM Stacker T- Processor E Conroe Mobo Don t know yet Video Card Nvidia GTX or new release HD s or gig Seagates Sata Sound Card Creative Sound Blaster Audigy ZS Platinum Pro or Power Supply? For new build newer HSF Thermalright X - when released Floppy Card Reader Two DVD- Burners I will go to water cooling from Swiftech probably a year or so down the road My current system has a PC Power amp Cooling Turbo- Cooled ATX-PFC Deluxe and it has done me right My PC was on one night and I was sleeping a storm hit and I awoke to a burning smell that morning My PSU was fried but it didn t take any of the components with it That smell stayed in the house for three weeks I was personally thinking of a watt PSU but if I m off base here let me know I looked around at PC Power amp Cooling site and didn t see that size Open for advice thanks nbsp

A:Power Supply? For new build

You can get 1000watt psu's now, they arent hard to find, check thermaltake, silverstone, I know they have good ones. 850 would probably be minimal for that thing you're running.
 

http://www.techspot.com/community/topics/power-supply-for-new-build.77117/
Relevancy 45.58%

I boot no power New first build just built my new pc and it wont power up no mobo light the fan on the PSU wont turn no anything I am baffled i think its the PSU I have checked for lose cords and even tried another New build first boot no power power switch New build first boot no power from my friends case that i know works I think my PSU came trashed but the box was ok thanks Specs MoBo ASRock H M B LGA Intel H HDMI SATA Gb s USB Micro ATX Intel Motherboard PSU Antec NEO ECO C W Continuous Power ATX New build first boot no power V v EPS V PLUS Certified Active PFC Power Supply RAM G SKILL Ripjaws Series GB x GB -Pin DDR SDRAM DDR GPU XFX HD- X-ZNFC Radeon HD GB -bit GDDR PCI Express x CPU Intel Core i - Sandy Bridge GHz GHz Turbo Boost LGA W HDD Seagate Momentus XT ST AS GB RPM quot SATA Gb s with NCQ Solid State Hybrid Drive Case COOLER MASTER HAF RC- -KKN Black SECC I also tried booting it with just one stick of RAM the PSU and MoBo Nothing still nbsp

A:New build first boot no power

Check that your system isn't being shorted out by any of the motherboard mounting screws. Try testing outside of the case if in doubt. Other than that it sounds like you could have a DOA component.
 

http://www.techspot.com/community/topics/new-build-first-boot-no-power.169887/
Relevancy 45.58%

Hi guys I ve spent today building a pc for myself However on pressing the on button there s no reaction at all My machine specs are M B - Gigabyte GA- A-UD Processor - AMD RAM - Corsair Gb DDR Case - Zalman Z Graphics card - Gigabyte HD PSU - Corsair CX M W Wi-fi card also installed but can t remember the name and seem to have temporarily lost the box in a pile of packaging So far I ve checked the CPU and motherboard power sockets the wall plug sockets and the power cord to my PSU I ve also checked the connections between my case and the motherboard and these all appear to be correct on power build PC doesn't As part of this final point I switched the power on LED with the power button they both originate from the same location so thought they may be mixed up Anyhows I got a solid LED which suggests to me that a there s power running through the switch circuit and b the pc isn t booting when told to as a PC build doesn't power on solid LED would indicate PC build doesn't power on circuit completion which would be the equivalent of holding in the on button If anybody could shed any light on where to go next I d be eternally grateful currently searching the house for a paperclip to test the PSU nbsp

A:PC build doesn't power on

Does the CPU and case fans move at all, when pressing the power button?
 

http://www.techspot.com/community/topics/pc-build-doesnt-power-on.198098/
Relevancy 45.58%

I have an Abit KN8, AMD 3200 XP, Antec 400w Smart power, 1 Crucial 512 dimm, an ATI 300X PCIe video, a floopy drive, an ide hard drive and a usb mouse and keyboard. All parts are known to be good. As I turn on the power the LED on the board lights, the power supply fan-cpu fan and auxillary fan all spin for just about 2 seconds and stop. The power light in the case stays on. I have reset the CMOS and changed the battery, reset the power cord connection and reset memory dimm. I have rechecked all connections.

Does anyone have suggestions of things to try. Hate to take the board out to look for shorts.

Thanks

Rbuck
 

Relevancy 45.58%

Here are my specs that i ordered from Newegg - - CASE Power with first PC issues build APEVIA ASP X-QBOII-NW-BK - - MB INTEL BOXDH GDB H LGA R - - VGA SAPPHIRE - L HD G R - - CPU INTEL CORE I G M R - - MEM Gx PNY MD KD - R - - CARD READ VANTEC UGT-CR R - - HD T HITACHI HDS C ALA - - DVD BRN ASUS DRW- B ST BLK B AS - - WIN HOME PREM SP BIT ENG PK - - WL ADPT ROSEWILL RNX-N PCI RTL Hooked it all up plugged in the power cord flipped main power switch on case the only thing that changed was a the LED on the mobo turned on No fans not even the PSU fan turned on I got on the psu site and read some FAQs and they said to use a paperclip to test the PSU one end in the green and Power issues with first PC build one end in the black adjacent still didn Power issues with first PC build t power up Any advice nbsp

A:Power issues with first PC build

That list was hard to read because it is in all capitals. Did your power supply come with your case?
 

http://www.techspot.com/community/topics/power-issues-with-first-pc-build.165038/
Relevancy 45.58%

Motherboard: DP35DP
Power: Neopower 650
Case: Antec P182

The pushbutton power switch must be pressed in twice to get the unit to power on.

Calling Antec they say to a) update bios or b) try another power supply or c) change the motherboard.

All of which seems extreme, with everything else ready to go now. I was thinking the "2 step switch" was a safety feature so the unit could not be accidentally turned on but no such luck.

What is the likely problem?
 

A:new build - power up problem

Re-check all your power and switch connections to the motherboard, unplug then replug them a few times.

If no joy, time to start suspecting a bad case switch, mobo, power supply.

Bios has nothing to do with it.
 

https://forums.techguy.org/threads/new-build-power-up-problem.777763/
Relevancy 45.58%

I recently built a gaming computer with the following specs i K OCed to GHz No voltage change Corsair TX power supply ASUS P P Motherboard ASUS GTX Direct CU no over clock just left it at MHz G SKILLS Ripjaw X GB x GB kit MHz - - - V WD Caviar Black RPM GB SATA mb Cache HAF Case Problem The first time I booted my computer everything was fine But when I tried to turn it on the next day after a full shut down it wouldn t turn on with the power button unless I unplug it from the wall socket first After starting my PC would then take me to a screen that says quot Keyboard and Mouse detected press enter to restore your BIOS or Press F to enter settings quot upon pressing build issue power New F it would take me to the normal UEFI interface except all my previous settings are reset to the default values boot order CPU multiplier etc I checked the voltages on my graphics card memory and CPU everything looked ok Motherboard standoffs are installed correctly and so is the I O shield I ve also checked all of my connections they are all connected New build power issue properly I m pretty sure it s not the motherboard battery either since my system timer wasn t messed up so what s the problem I m so frustrated any help would New build power issue be greatly appreciated Edit all drivers are up to date BIOS flashed to most recent one No trouble waking New build power issue from sleep nbsp

A:New build power issue

Make sure the bios are set at defaults... I had a computer with this problem a while back. It was the motherboard
 

http://www.techspot.com/community/topics/new-build-power-issue.169947/
Relevancy 45.58%

Hi all, seasons greetings to you all.

Have just purchased an Elite K7S5A mo/bo and AMD Athlon XP1800+ CPU, along with a new case and memory module.

The problem I have is that although I am certain that I have followed the build instructions to the letter (this is my third self build compo) the computer will not power up.
I have installed two hard drives, CD and DVD, sound card and video card from my old (working) compo.
Does anybody know if there should be power at the 12V output from the PSU at all times, or only when the power switch is depressed? I am only getting about 0.5V, and nothing at the 5V output.

Anybody any ideas?

Cheers to all, thanks in anticipation

Keith
 

Relevancy 45.58%

Hi everyone I built this computer about a week ago Asus P Z -V LX Socket Onboard graphics output Channel Audio ATX Intel Core i GHz Socket MB up New Solved: build power won't L Cache Corsair GB x GB DDR MHz XMS Memory Kit CL V unbuffered Seagate GB quot SATA-III Gb s Barracuda Hard Drive RPM MB Cache LiteOn iHAS - x DVD RW DL amp RAM SATA Optical Drive Coolermaster Elite Case With Coolermaster eXtreme Power W PSU PowerColor HD GB DDR DVI VGA HDMI PCI-E It was running great right up to today it could easily run Photoshop web browsing Flash Age of Empires almost max settings and didn t cause any problems Although I noticed a high pitched squeal coming from the GPU Solved: New build won't power up so I searched for solutions on Google I found that it could be a problem of the card not being placed properly so I plugged all the connections out moved it to somewhere with good light and reseated the GPU When I plugged everything back in it wouldn t turn on No fans no nothing But the light on the motherboard Solved: New build won't power up was on After a few attempts of turning the PSU on and off checking the front panel power connectors on the mobo etc it finally managed to start So while Windows was starting I decided to put the side of the case back on and while I was doing this the power was lost again It hasn t started since and I am really worried that there is something badly wrong after reseating the GPU Please help me fix this problem as I am only and was a lot of money to me and I don t want it wasted nbsp

Relevancy 45.58%

Just finished putting together a PC. This is my first time, but I'm pretty confident I know what I'm doing.

Everything connected and I turn on the power button, and nothing.

My only thought is the power supply. The 24 pin connector is missing one of its pins. Is this normal? I took a pic so you can see what I mean. It's like the wire was never put through the hole if you know what I mean.
Thanks for the help.
 

Relevancy 45.58%

Hi i recently build a computer. these are all the parts.

Asus p8z68-v gen3 motherboard
Corairs 650 tx power supply
Gtx 560 ti superclocked graphic card
intel i5 2500k processor
8G of ram
cooler master 212 plus cpu fan
Windows 7 ultimate (64bit)

OK now on to my problem. Every time i shut of my computer and it lasts a few hours off, i need to flip the power supply switch on the back for a few seconds to be able to turn it back on. I don't know what is causing this. I don't know if it is a setting on the bios or something wrong with the power supply. It is not a big problem but it gets kind of annoying after a while. Any help would be appreciated. PLEASE!!
 

A:Power problems with first build

Try resetting the bios to defaults or try updating the ASUS bios
 

http://www.techspot.com/community/topics/power-problems-with-first-build.177492/
Relevancy 45.58%

I just built a new i3 SB machine with a gigabit board. It was working fine for 3 dys put win 7 on it, but now all of a sudden it just shuts off as soon as i press the power button.

I took the board out and looked at it and i powered it on outside the case but it still does it. Everything looks kosher to me.

A:New PC build turns off within a sec of power on

Could be a few issues, maybe the power button is getting stuck in and just powering down the machine.
Mobo or PSU might be defective.
What I would do is unplug all hardware and just use the bare minimum and see if it still powers down.

http://www.sevenforums.com/bsod-help-support/154792-new-pc-build-turns-off-within-sec-power.html
Relevancy 45.58%

Hey everyone,

I built a new system (or rather am in the process) I just got my mobo (EVGA 680i T1). I took it outta it's box, installed the CPU (core2 duo) and heatstink/fan, and then connected the 24-pin and 8-pin power cables from it's awaiting powersupply (750w).

The standby light came on, then when I press the power button (the board power button) the CPU fan / power supply fan came on for a few seconds, then turned off and now it wont turn on at all, though the standby light remains on.

I already tried to reset the CMOS, I haven't tried pop'n out the battery which I read somewhere might fix it, though it seam unlikely. and I tested the power supply which seams to be running fine.

Anyone have any clue what might be going on, and please don't tell me my shiney new board is toast .

-Thanks,
 

Relevancy 45.15%

Hi. Will the GTX 770 bottleneck my i5 3450? What do you think? I play at 1920x1080. Thank you.
 

A:GTX 770 - i5 3450 - Bottleneck

It would really be the other way around, the i5 will bottleneck a 770. You are fine though, the i5 you have is a quad core and 1080P isnt anything that will stress it too much. You may get a few less FPS than if you had a i5 3570K since the 3450 has a lower clock speed.
 

http://www.techspot.com/community/topics/gtx-770-i5-3450-bottleneck.192913/
Relevancy 45.15%

Hello Everyone,

I have old system which i use as HTPC, my system comprises:

Intel P4 3GHz. (Sokcet 478)
ASUS P4S800D (AGP slot 1.5V)
1Gbyte Ram
Windows MCE 2005

and FX5200 AGP.
But i can't play 1980x1080 movies smootly, my question is:
If i will upgrade my graphic card to HD3450 AGP 512MB, could i watch 1980x1080 movies smotly....or sould i upgrade my system to ASUS ION such as: AT3N7A-i.
 

https://forums.techguy.org/threads/hd-3450-512mb-agp.918697/
Relevancy 45.15%

Hi, i'm in a very big trouble.
I tried updating my ATI HD 3450 graphic cards and i went through the procedure from the given release note in ATI website before downloading the ATI software.

Here's what i did:
- Uninstall ATI install manager from program features - uninstall/change program.
-check in local disk if there's any ATI associates files and delete
-reboot
-install the 9.6 ATI package (option 1)
-reboot.

Here's what happen:
-During the installation, i chose custom installation but there's only ATI install manager and something C++ but there's no CCC, WDD and WDM
-When i go to device manager, the display is still using default VGA driver instead of ATI driver.

so right no, pretty much i'm just using VGA default display.

I'm using Window Vista Home premium 32bits.

please help me, i don't want to restore my computer.

Thanks~

A:ATI HD 3450 update help!

Why did you choose custom installation? Where did you install the driver too?

did you get the FULL ATI catalyst suite?

http://game.amd.com/us-en/drivers_ca...common-vista32

http://www.vistax64.com/graphic-cards/235830-ati-hd-3450-update-help.html
Relevancy 45.15%

i have a spare hd raedon 3450, because i bought 2 thinking to run in crossfire, didnt work, so i decided to let a friend have it, he has a 400watt psu, i think it works, but im just not not sure, i think i have a 400 watt psu too, idk, doesnt say in the manuel.

and it was foolish to throw away the box in it, i was kinda happy that day..

A:hd raedon 3450

a 3450 will easily run on a 400 watt psu........ i ran one on a 250 watt psu for almost four months

http://www.vistax64.com/graphic-cards/238846-hd-raedon-3450-a.html
Relevancy 45.15%

Is this graphics card compatible with windows 7 and aero aswell as games like gta san andreas and gta 4?

I have AGP 8x. I do think this will work.

Also. I have 2gb ram 2.4 Ghz sometimes overclocked, intel pentium 4.

Running Windows XP right now. I have windows 7 ultimate CD but not yet installed it.

37.2 GB available hard-drive space.

A:Sapphire HD 3450 AGP

Will those games work with that card, probably. Will they run at an acceptable level, not likely. You CPU is also under the minimum requirements,






Quote:
Minimum:
Processor: Intel Core 2 Duo 1.8Ghz, AMD Athlon X2 64 2.4Ghz
Memory: 1.5GB
Free Hard Drive Space: 16GB
Video Card: 256MB NVidia 7900 / 256MB ATI X1900
DirectX 9 compatible Stereo Sound Card
Keyboard
Mouse



which is a dual core (with a quad being the recommended), where your P4 is only a single core.

Another thing to consider is Windows 7 and AGP cards. It is totally hit and miss as to whether they will work properly, if at all due to the usual lack of a proper AGP driver (that is for the AGP slot on the motherboard, not the video card driver itself). If you haven't seen it this thread,

Install AGP Drivers for HD 3850, 3650, 2400 PRO

should give you an idea as to the hoops some have had to go through just to get an AGP to work.

As much as an upgrade over the MX400 in your specs the 3450 would be, unfortunately with the rest of your specs it isn't really worth getting. You would be better served to hold of on Windows 7 and those games until afford a system that is better suited to them.

http://www.sevenforums.com/graphic-cards/85108-sapphire-hd-3450-agp.html
Relevancy 45.15%

My new build wont power on all I hear is a few high pitch sounds coming from what I think is the psu My specs SSD GB SAMSUNG Pro TB HDD from previous build it was working fine days ago TB HDD from previous build it was working fine days ago GPU GTX GB from previous build it was working fine days ago MSI GTX GAMING G GeForce GTX GB -Bit on it's way newly wont build power My on in the mail Case is pretty old and doesnt have a lid but it was working fine with my pervious buid PSU CORSAIR Enthusiast Series TX V W ATX My newly build wont power on V v EPS V v PLUS BRONZE Certified Active PFC High Performance Power Supply My newly build wont power on from previous build it was working fine days ago Heatsink Scythe Ashura Universal Processor Cooler CPU Intel Core i - K Haswell Refresh Quad-Core GHz Motherboard MSI Z -Gaming Intel Z Motherboard Memory CORSAIR Vengeance GB x GB -Pin DDR SDRAM DDR PC Desktop Memory My newly build wont power on Please help me

A:My newly build wont power on

Here's a list to work on from member TVeblen:
Strip it down and then add components back, one at a time, to try and isolate the offending component.

The test (power off, power cord unplugged):

• Disconnect everything externally connected except the mouse and keyboard (printers, USB devices). If you are not using a wired mouse and keyboard see if you can borrow one.

• Disconnect the power and data cables from all the drives inside the computer (Hard drives, DVD/CD drives).

• Remove all the cards installed in the PCI slots including the video card.

• Remove all the RAM sticks (same rules as above).

Now connect the power cord and turn the PC on.

• The motherboard should start beeping. You should get a beep code that tells you there is no memory. This is good, it means the processor is functioning and the motherboard is good so far.

• Now add one stick of memory in Slot A1 and power on. More beeping: "no video card" beep code. This is good.

• Then add the video card and connect it to the monitor. You should get no beeping and you should see the BIOS screens, ending with the message that there is no boot device.

If you get no video then switch the one memory stick installed for another one and test.

Continue adding components one at a time.

If at any point the PC fails the the last component added was the problem one.

If you removed everything and there is only the Motherboard (with integrated video), processor, and power supply to contend with and it does not POST or show anything on the screen, then the problem is one of those three.

If you have tested by using another power supply then you are down to two. CPUs rarely fail, so motherboard is the most likely guess.

Try performing a CLRTC or Clear CMOS as a last ditch effort, and check the 3v battery. Both long shots, but what do you have to lose at this point.

http://www.sevenforums.com/hardware-devices/348896-my-newly-build-wont-power.html
Relevancy 45.15%

Rebuilding from array of old parts. When old PC was taken apart all I needed was a new case, but I revamped alot and ended up with most everything needed for a new PC leftover. Rebuilt PC from the old parts. Couple of problems here. The new case has elevated areas where the standoffs for the motherboard should go. If standoffs are used the MB sets too high in the case. (Like its designed not to use standoffs. And there were no standoffs packaged to use.) So when all put together sans standoffs, No power. None period, no beeps or anything. The fan in the power supply dons't run either. Does this sound like a problem with grounding on the case or just a faulty power supply?

MB ASUS A7V8X-X
Power supply AVG 400 watt
Case Thermaltake Matrix
 

Relevancy 45.15%

I'm working on my first build and unfortunately I'm alone in doing it I've hit a Nothing has build. New fans except lights? and power wall Everything is hooked up and I finally flipped the switch and turned on the PC The fans and their lights came on the motherboard standby light came on the GPU fans turned on and the optical drive light came on but nothing works I plug in my mouse and keyboard but they do not appear to be receiving power My optical drive will not eject My monitor when unplugged from the GPU displays its typical quot auto-detect quot floating image which is normal When I plug the VGA cable into the GPU the monitor instantly goes to sleep and I can't wake it up I've checked and rechecked Everything appears to be in the correct slots Here are the Nothing has power except fans and lights? New build. PC specs Motherboard Asus M A R CPU AMD FX GPU EVGA GTX PSU Nothing has power except fans and lights? New build. EVGA Supernova NEX G RAM GB via two sticks in the appropriate slots I have no idea what else to do I have pictures though they are dark and I don't know how helpful they'll be

A:Nothing has power except fans and lights? New build.

Welcome to the forum. A daft one but this often happens is there any jumper on clear cmos pins I have know boards come with them set on normally you only put that jumper on for a second or so. Failing that disconnect hd,cd and any addon cards that are not needed with keyboard plugged and try then. If it still doesnt work try it out of the case often its a short when putting it in the case

http://www.pchelpforum.com/computer-diy/127753-nothing-has-power-except-fans-lights-new-build.html
Relevancy 45.15%

Just built a new PC, turned it on and there is power (all fans are working including GFX and CPU) but nothing at all appears on the screen and I get no beeps from mobo.

I have disconnected all components from the mobo apart from the CPU and main power connector and still get the same problem. Any suggestions or is my mobo screwed? Do I need to plug anything in to make sure I can hear mobo beeps?
 

Relevancy 45.15%

I have just finished putting together a new build with the following components:
ARIANET Triumph Black Midi Tower Case w/ 450W Power Supply

Intel Core i3-2100 3.10GHz (Sandybridge) Socket LGA1155 Processor

Corsair Value Select 4GB (1x4GB) DDR3 PC3-10666C9 1333MHz Module

Asus p8h61-m le/usb3 motherboard

Western Digital Caviar Blue 500GB SATAII
When I plug it in and turn it on, the power light on the motherboard turns on and the cpu fan starts to move then immediately stops.

I have tried reseating all the connections, and I tried different memory from my main pc, but with no change in result.

Can anyone suggest what could be wrong or how I could test for problems?

Any help is appreciated.
 

Relevancy 45.15%

Hi all Originally i was going to build a new PC with a single GTX video card I choosing Power Need build a Supply new for help have since opted to build something a little different though I was just wondering what size power supply you guys would recommend to me for my new build The full specs are CPU AMD Phenom II x Black Edition Mobo Gigabyte GA-MA X-UD P RAM Corsair XMS x GB DDR - HDD Western Digital Caviar Black TB x for Raid Video Cards Asus ATI Radeon HD s in Crossfire Optical Drive Asus DRW- B LT Cooling the CPU will be Need help choosing a Power Supply for new build the Zalman NT and will all be housed in the Antec Nine Hundred Two gaming case I was originally planning for a watt Corsair Power Supply Unit for this system But i am beginning to wonder if that will actually be enough for the system What do you guys think Is it enough If not can you recommend me a good Power Supply Please dont say stuff like quot you should get an Intel CPU and a single better video card quot because i have already made my mind up on this system Thanks in Advance nbsp

A:Need help choosing a Power Supply for new build

The Corsair line of power supplies is excellent. If you are not comfortable with the 650 try the 750; what do you need from the 12v in amps/wattage for Crossfire? Will you be overclocking?

By the way, love the cpu and 4850's in Crossfire and those WD Blacks have a good reputation. Is your system minus the psu ready to be assembled?
 

http://www.techspot.com/community/topics/need-help-choosing-a-power-supply-for-new-build.146440/
Relevancy 45.15%

here s what I have SILVERSTONE SST-TJ B-X Tyan thunder mobo CORSAIR CMPSU- TX W power -- new wrong supply? build ATX V EPS V x AMD Opteron Barcelona GHz x KB L Cache MB L Cache Socket F W Quad-Core Server new build -- wrong power supply? Processor x CORSAIR ValueSelect GB x GB -Pin DDR SDRAM DDR PC gb total ASUS EN GTS HTDP M GeForce GTS MB -bit GDDR PCI Express x HDCP Ready SLI Supported Video Card I have the mobo in the case the chips heatsink one hd the ram the graphics card installed in the case When I turn the power switch on the fans all start spinning but they all spin with this pulsating rhythm and the case led display flashes with that rhythm as well On the mobo there are three power connectors that were supposed to go to my mobo a pin got it and pin got that too and a pin I have pin cables a pin jack on the mobo i plugged in the pin jack When I hit the power switch for the first time nothing happened when I removed the pin plug out of the pin jack the machine powered up but with that weird rhythm I described this is from the motherboard manual - Installing the Power Supply There are three power new build -- wrong power supply? connectors on your Thunder n M S -E The Thunder n M S -E requires that you have an EPS V power supply that has a -pin an -pin and a -pin power connectors NOTE Please be aware that ATX x ATX V and ATXGES COLOR blue important COLOR blue important power COLOR blue important supplies color color color may not be compatible with the board and can damage the motherboard and or CPU s Click to expand Also when I turn the new build -- wrong power supply? machine on with a monitor connected nothing happens I don t see any bios info I ve tried both the video card and the mobo monitor inputs I have a belkin switch attached I ll try removing that and having the monitor hooked up directly I think I have the RAM in correctly I looked in the manual there are ram slots and I have sticks I looked on newegg for a power supply that should work but wasn t sure has anyone run across this issue before thanks bp nbsp

Relevancy 45.15%

just obtained acrosshair iv formula motherboard with sempron 100 series processor and 3gig ddr3 1333/1066 non-ecc un-buffered memory question
do i need to get a ATX cpu or will my old 450 watts power pack be ok

http://www.pcadvisor.co.uk/forum/helproom-1/new-build-help-required-power-supply-4604750/
Relevancy 45.15%

Hi, Guys (And Gals) I'm attempting my 1st PC build and HAVE used the various online power supply calculators... however I'd like to hear some feedback from you all. No matter where I look online I always like to come here to be sure. My specs for the build are as follows:

MoBo: GIGABYTE GA-F2A68HM-H FM2+ USB 3.0 MATX
Amd A6 5400K 3600Mhz Blk Edt 1mb 65w Socket FM2


Video Card: XFX RADEON R7 240 2GB DDR3 LOW PROFILE
RAM: ADATA XPG V1 DDR3 1600 4GB

HDD: Seagate 1TB Serial ATA HD 7200/64MB/SATA-6G

I would really like to use one of the 350W or 400W power supply I stripped from my previous PC's. I'm thinking of hooking it to an HDMI or VGA projector eventually though (Haven't bought it yet) Can I get away with one of these and play a game like World of Warcraft? or do I need to order something like the
SolidGear 650W PS2 ATX Power Supply on Tiger Direct?

Thanks in advance for any advice & thoughts
 

A:1st Build Power Supply Question

Over engineer the PS;

Calculate the actual needed power,

add a fudge factor and

multiply by 1.5.
Then round up to the next commonly available size
 

http://www.techspot.com/community/topics/1st-build-power-supply-question.213326/
Relevancy 45.15%

Win XP
ASUS P5AD2 Premium Mobo
P4 LGA 775 560 3.6 gig 1mb cache 800 fsb
ATI PCI express 256mb X600 Pro video card
Plextor 716A DVD RW
Antec PSU 550 watt ATX12V w/front contol panel
Mitsumi 7 in1 card reader w/FDD
Seagate 120 gig HDD IDE internal

The machine powers up and I am able to get to the screen at which I push the DEL key to go to BIOS settings but the machine just powers down. The green mobo light remains on. I get a no signal on the monitor and the fans quit. I have checked all connections but can't put my finger on it. Any ideas would be appreciated.
 

Relevancy 44.72%

HI techguyforums ive issue help HD BSOD please 3450 posted many tiems about my blue screen of death i finally figured out the problem that was causing the BSOD it was the graphics driver my computer was bought years ago its a quad core with a HD radeon series graphic cards It came with VISTA so my problem is when i install windows and i install all the updates for some stupid reason windows always tries to install these two optional updates radeon hd radeon hd and when i install these my damn computer gets HD 3450 BSOD issue please help the BSOD ANd since my graphics card is HD HD 3450 BSOD issue please help i went on to the HD 3450 BSOD issue please help website to download the latest driver for it that driver on the damn AMD website gives me the BSOD too its definetely a driver issue so my question is how can i get the correct graphics card driver catalyst control centre without getting the BSOD right now im on vista but i cant get the right graphics driver please help me find the right one so i avoid all BSOD thanks nbsp

https://forums.techguy.org/threads/hd-3450-bsod-issue-please-help.987870/
Relevancy 44.72%

I'm getting a dell studio laptop, which comes with the ati radeon hd3450 graphics card (256 mb.) There's not much info out there on what games it can cope with so if anyone knows, how would it do with these:

Half Life 2: Episode 2
Bioshock
Call of Duty 4
Gears of War
Prey
Quake 4
Monkey Island (Lol...just to make sure one of the games would work well)

I'm realistic that this isnt a super gaming card, but if it can run these games at even low settings with decent playable fps then be sweet.

Cheers
 

A:HD 3450 game compatibility?

Well>>>

KK buddy so heres whats going to happen gears will run probably without any issues bioshock will run on medium completely fine and so will cod 4 half life 2 as well
 

http://www.techspot.com/community/topics/hd-3450-game-compatibility.110722/
Relevancy 44.72%

Hi,can I overclock i5 3450 from 3.1 ghz to at least 3.2 ghz with using only the stock cpu cooler?
I am using gigabyte b75d3h
I know the following points:-
1.3450 is "non-K" hence cannot be efficiently OCed
2.b75 is not suitable for OCing
3.only 0.1ghz increase wont bring any major improvement

I am doing doing it only for fun!
Also if I successfully OC to 3.2 ghz then will it perform like a 3470?

Thanks in advance
 

A:Overclocking core i5 3450

Yes, that much of an overclock should not bring any major heat problems.

It's going to be a challenge without an unlocked chip, but you should be able to do it with. Happy overclocking :d

With the specs I've read on the two, besides the boost function it should perform on the same level.
 

http://www.techspot.com/community/topics/overclocking-core-i5-3450.192780/
Relevancy 44.72%

every time i try to benchmark my new pc
it freezes when loading the test or the screen flickers back to my desktop and in the bar below i get a message saying "display drivers have failed but are back online"

what should i do??
 

A:Help with 3dmark vantage and HD 3450

What operating system are you running and what are your complete system specs?
 

http://www.techspot.com/community/topics/help-with-3dmark-vantage-and-hd-3450.107542/
Relevancy 44.72%

Hey everyone!

So the thing is that I just bought a radeon hd3450 graphics card, but after installing it into the agp slot and starting my computer the monitor displays no signal. Fans are working on the card so it's getting power at least. Any ideas/suggestions?

Thanks in advance! ^^
 

Relevancy 44.72%

Hi, the 3450 costs around 20$ more than the 2400, then which one should I buy??
Thanks in advance
 

A:Core i5-2400 vs i5-3450

I haven't compared performances but they should be comparable in performance. They i5-3450 is a die shrink and would consume less power. There is also better integrated graphics compared to the i5-2400.
 

http://www.techspot.com/community/topics/core-i5-2400-vs-i5-3450.188899/
Relevancy 44.72%

hi all,
i need the original bios for the Sapphire HD 3450 AGP 512M, but i'm unable to find it on internet..

i did a mistake flashing my graphics card's bios, and now i need the original one to restore it..

A:Sapphire HD 3450 AGP Bios

hi is this what your looking for

sapphire hd3450 512mb ddr2 agp >>> Free sapphire hd3450 512mb ddr2 agp software, best sapphire hd3450 512mb ddr2 agp download - Page 4 at Downloadplex.com

http://www.sevenforums.com/graphic-cards/212609-sapphire-hd-3450-agp-bios.html
Relevancy 44.72%

Here's my rig Dell Precision workstation Xeon processor Intel E chipset GB PC SCSI hard the HD 3450 AGP trying all tricks BSOD's ATI with despite drives VisionTek Radeon HD MB AGP video card ViewSonic Optiquest Q wb quot lcd monitor Windows Professional -bit Service Pack Monitor is using the Generic PnP Monitor driver because no other specific driver is available The Intel chipset driver is Microsoft I used video card drivers from VisionTek and ATI I've tried lowering the AGP Aperture from mb to mb I've tried the fix suggested by torrentg at Install AGP Drivers for HD PRO and that didn't help I've used Display Driver Uninstaller multiple times prior to installing drivers RAM and hard drive tests pass I suspect I need to update my chipset drivers however despite extensive searching no newer ones appear to exist When doing nothing particularly taxing to the video system using Outlook amp Excel watching YouTube videos I get BSOD's when using higher resolutions like x The popular BSOD is quot PFN List Corrupt quot among others like quot IRQL Not Less Or Equal quot quot Memory Management quot and quot Page Fault In Non Paged Area quot BSOD's with AGP ATI HD 3450 despite trying all the tricks My prior older AGP video card using the chip GeForce FX also caused BSOD's Anyone have any other ideas for suggested fixes Will abandoning the HD AGP card for a PCI fix the problem I appreciate any help Brian

A:BSOD's with AGP ATI HD 3450 despite trying all the tricks

Hello and welcome to sevenforums,

Please follow the following instructions and i will be more then happy to help you.



   Information
Before posting a BSOD thread, please read the instructions here: Blue Screen of Death (BSOD) Posting Instructions

If you need to add new information like the dump files, please make a new post in your initial BSOD thread. Please do not make an extra new thread.

http://www.sevenforums.com/bsod-help-support/343856-bsods-agp-ati-hd-3450-despite-trying-all-tricks.html
Relevancy 44.29%

I currently have this (and don't want them to collect any dust:
Asus Motherboard
Quad Processor
DDR Memory

Plus a couple hard drives, but absolutely nothing else. Since this is new to me, I'm asking:

1 - Is there a way the more experienced users would suggest going about a new case and how to know the appropriate power supply to buy.

2 - I bought the MB used from newegg.com, and it didn't come with any wires/connectors. Can you tell me what I'd need to fully be ready when I have all the components?

Thanks!
 

A:New build case & power supply recommendations

I havnt done this in a while but here it goes.....

If you dont have the propor heatsink/fan combo you will need one of those for your processor.

For your needs just get a quality 500w PSU by Antec, Silverstone, Thermaltake ect ect. No $20 bargain buys. If you plan on putting in some super fancy graphics card, take the minumum requirments for that card off the box and add 100 watts.

Wires you will need are just your SATA cables.

The PSU should come with all you need to connect it to your motherboard.
 

http://www.techspot.com/community/topics/new-build-case-power-supply-recommendations.156270/
Relevancy 44.29%

I recently built a new PC.
I had issues powering it on, then I realised I forgot a 4 pin power connector in the corner. Next boot, everything booted up fine, to start. After 3 seconds it powers down, then powers back up and stays up. I think every thing is powered on, disk drive works forsure, the only issue is I get no picture. I am using a BFG 9600GT and used the dvi to vga adapter to connect to my old gateway 2000 vivitron monitor, though I will probably be getting a new monitor soon. I was thinking the problem could be either my video card, video card/monitor non-compatibility(or something to do with the dvi-vga connector) or maybe something else. Or could it be the power problems discussed before?

I am using an Asus P5QL-PRO mobo, 4GB(2X2GB) Gskill memory, 9600GT, E8400 processor and an Antec earthwatts(500 watt).

Any help would be appreciated.
 

Relevancy 44.29%

Hi hope some one can help i just build a new comp from new and some old parts ..old video card , hdd, cd drive, with new mother board and new cpu. in a soyo case

i have power but no video. the led for the hdd and power on work the hdd runs.

i have windows xp os on the hdd from a old comp that work?

Do i need to have a start up disk in the drive or a boot up disk or bios for the first boot up to have video on my screen ??
hope some 1 can help
 

A:i just build a new computer and it does not show video but it has power

https://forums.techguy.org/threads/i-just-build-a-new-computer-and-it-does-not-show-video-but-it-has-power.270749/
Relevancy 44.29%

Hi I am a graphic designer switching to PC i have done wok on my old mac replaced ram hard drive dc in board but this is the first time that I will be building a pc from scratch Below are the parts I bought from new egg there is one pretty obvious problem i think small? too power any other build: issues? supply new the power supply is w This was an error I new build: power supply too small? any other issues? originally had a w cooler amster and someone recomended switching brands and i was careless i also forgot to get a wireless card my question is can I build this with the PSU I have and replace it later it was pretty in expensice and i am maxed out or is it going to be a bad idea This computer is not for gaming it is for graphic design in Adobe including some aftereffexcts and flash Newegg com - GIGABYTE GA-X A-UD R LGA Intel X SATA Gb s USB ATX Intel Motherboard Newegg com - G SKILL GB x GB -Pin DDR SDRAM DDR PC Triple Channel Kit Desktop Memory Model F - CL T- GBNQ Newegg com - CORSAIR CMPSU- CX W ATX V V PLUS Certified Compatible with Core i Power Supply Newegg com - Intel Core i - Bloomfield GHz x KB L Cache MB L Cache LGA W Quad-Core Desktop Processor BX Newegg com - EVGA G-P - -TR GeForce GTS GB -bit DDR PCI Express x HDCP Ready SLI Support Video Card Newegg com - ASUS Black X DVD R X DVD RW X DVD R DL X DVD-R X DVD-RW X DVD-RAM X DVD-ROM X CD-R X CD-RW X CD-ROM MB Cache SATA X DVD Burner - Bulk - CD DVD Burners Newegg com - Western Digital Caviar Black WD FALS TB RPM MB Cache SATA Gb s quot Internal Hard Drive -Bare Drive Newegg com - COOLER MASTER Intel Core i compatible V RR-UV -XBU -GP mm Rifle CPU Cooler Newegg com - COOLER MASTER Centurion CAC-T -UB Black Blue Aluminum Bezel SECC Chassis ATX Mid Tower Computer Case nbsp

A:new build: power supply too small? any other issues?

Well, I'd be real reluctant to fire that up with a 400W supply. When a supply goes, it frequently takes stuff with it.
 

https://forums.techguy.org/threads/new-build-power-supply-too-small-any-other-issues.941143/
Relevancy 44.29%

So I m trying to build this PC Intel i Asus P TD Deluxe Diamond Radeon HD Corsair TX W When New video in, won't plugged power without EATX12v no build - it on with PC I plug in New PC build - won't power on with EATX12v plugged in, no video without it the pin EATX v connector the PC will not power on The power comes on just for a split second the fans twitch ever so slightly then it all goes off I ve tried plugging in all pins New PC build - won't power on with EATX12v plugged in, no video without it as well as just pins with the same result If I leave the pin EATX v completely unplugged the PC will power on However there is no video output to the monitor and the video card fan does not spin I ve tested the monitor as well as the monitor cable and those are functional I have two of the Diamond video cards and I ve tried both of them with the same result I also tried each one individually in two different PCIE slots I have no idea why plugging in the EATX v would cause the PC not to power on nor why the video card Can anyone off some knowledge that might resolve my problem nbsp

A:New PC build - won't power on with EATX12v plugged in, no video without it

Bump.

Correction to my original post: The video card fan is spinning and receiving power apparently. The big issue here is that the PC will not power on when the EATX12v is plugged in. If I'm not mistaken, that powers the CPU, does it not? Which would explain why there is no video when I turn the PC on without the EATX12v plugged in.

Is the mobo damaged? I just can't figure any other reason that the PC won't power on with the EATX12v plugged in and will power on without it plugged in.
 

https://forums.techguy.org/threads/new-pc-build-wont-power-on-with-eatx12v-plugged-in-no-video-without-it.961872/
Relevancy 44.29%

Decided to build a new machine today.

Mobo: MSI 7600-P23(FX)
PSU: Thermaltake Smart 650W
Processor: AMD FX 6300

I have verified all power connections but when I press the power switch, all the fans begin spinning, but stop after only a second or two. Nothing else happens.

Any ideas on what to try or what is causing the problem?
 

Relevancy 44.29%

Hi, I am having to remove battery and AC adapter every day to hold down the Power On button an discharge the static build up.
Is there a permanent fix?
thanks plongs3

http://en.community.dell.com/support-forums/laptop/f/3518/t/19995218
Relevancy 44.29%

Hi all,

I've been doing some research on my new build and started looking into power phases. After reading some articles, it seems like the less power phases you have, the more susceptible your motherboard is to failing, especially if you're overclocking. Plus you also have to worry about components on your motherboard overheating such as the mosfets. Is all of this something I should be worried about?

The motherboard I want to get has 8+2 power phases (Asrock P67 Extreme4 Gen3). So if I plan on overclocking, should I step up to a 12+2 or 16+2 motherboard or will I be safe at 8+2?

Thanks in advance
 

A:New Sandy Bridge build - power phases

The ASrock P67 Extreme4 Gen3 is an excellent board. It overclocks impressively. People have managed to hit the 5 GHz mark at around 1.45V with a good aftermarket HSF.

More power phases do not guarantee better performance. Generally, more phases should make for smoother voltage output, but it is only one of several factors in the design of the CPU voltage regulator.
 

http://www.techspot.com/community/topics/new-sandy-bridge-build-power-phases.169347/
Relevancy 44.29%

Hey
I'm thinking about buying new latitude 3450 and was wondering what options i have if i would want to add second disc (ssd). Is there a free socket inside (m.2, mSATA) that would allow me to do that?

A:Latitude 3450 second disc options

Hi,
Thank you for reaching us.
In Latitude 3450 and 3550 there is only one slot for the Hard disk. However users can opt for different types of Hard drives as per the requirements.
This model is shipped with traditional SATA hard drives, Hybrid hard drives and also 128GB SSD.
Hope that answers your query.
Thank you

http://en.community.dell.com/support-forums/laptop/f/3518/t/19631360
Relevancy 44.29%

Hi I ve been looking for the last while for a laptop and graphics is one of my main concerns Before I start I want to make it clear that I m not GS? 8400m 3450 Radeon or ATI Geforce HD looking for really high graphics quality because I m limited by budget and on laptop you can t upgrade above the two ATI Radeon HD 3450 or Geforce 8400m GS? mentioned cards So basically I had been thinking about getting a Dell Vostro with Geforce m GS but just recently saw the Dell studio with ATI Radeon HD It would cost me about more to get studio atm but will also get extra Gb Hard disk space and a GHz core duo over the vostros GHz In terms ATI Radeon HD 3450 or Geforce 8400m GS? of performance I basically want ATI Radeon HD 3450 or Geforce 8400m GS? to know is the Radeon better than the Im not looking to play the newest games like crysis etc but do want to play some like call of duty which i know works on the Any advice would be much appreciated Thanks nbsp

A:ATI Radeon HD 3450 or Geforce 8400m GS?

"is the Radeon better than the 8400?"...

In this case, I would say yes
 

http://www.techspot.com/community/topics/ati-radeon-hd-3450-or-geforce-8400m-gs.108153/
Relevancy 44.29%

After uploading newest drivers, scrubbing my clean install of various generic audio and video codecs, drivers, devices and tools, I had spend about 4 hours of my life trying to get audio to work using a device that worked under XP MCE 2005.

Enough being enough, I weighed the costs and purchased a Galaxy GeForce GT220
for about 90 bucks at that local big box store. Sure I could have saved about $20-30 driving about 30 minutes each way in winter wet weather... I wanted audio over my home theatre system and I wanted it now.

First I downloaded the newest drivers available, installed the card, ripped out the default drivers and installed the new set.

Peace of mind, 7.1 sound, priceless.

I'll use that other card in my office where the silence of a passive card will be more appreciated.

Luck to others!

A:Problems with ATI HD 3450 Audio via HDMI

Sorry to hear you had such a bad experience with the 3450.... I am sure though that we could have helped sort it out.

Anyway, you got your audio and are happy so...

http://www.sevenforums.com/sound-audio/39932-problems-ati-hd-3450-audio-via-hdmi.html
Relevancy 44.29%

Hi 
i replace Vostro 3450 laptop the HDD disk with SSDi install windows 10 on it.but i have an issue when i turn on the computer is see the win icon for 2 second and then i see black screen For a minute, also in the shutdown or restart it tack More than usual.
wen the computer is start up and get to windows Everything works greatin safe mode the computer not doing the black screen and it tack 7 second to start up 
Maybe it graphic card?
please advise ?

http://en.community.dell.com/support-forums/laptop/f/3519/t/19987263
Relevancy 44.29%

Dear All this is my forst post here I hown since a Dell Vostro and recently upgraded to GB RAM Memory from Gb that were originally installed The years warranty also recently expired I started experiencing several problems with the laptop and after talking to soome IT friends they all sugested to wipe everything and reinstaall the OS Windows Professional SP Because my recovery partition didn't work i had to use a different install of the OS still a Win Pro and then install all Vostro !!!) Dell (many 3450 problems the drivers and SP The Laptop is still slow and i have had several only this AM BSOD possibly all related to the dxgkrnl sys Dell Vostro 3450 (many !!!) problems but unfortunately i cannot locate the minidump folder under C windows Dell Vostro 3450 (many !!!) problems so i cannot be entirely sure oof what is going on I also went through the post at the following link SOLVED BSOD Due to dxgkrnl sys but in my case replacing the MOBO is not an option at all When checking the Windows Event Viewer i can see warnings alerts quot Critical quot and so forth all over the places I also found in the System Information an extremely long list of errors in the Dell Vostro 3450 (many !!!) problems Windows Error Reporting page Moreover Windows Update is unable to install the following updates that appear to be important Every time i restart the laptop the updates are there and fail to install - Security Update for Windows for x -based Systems KB Download size MB You may need to restart your computer for this update to take effect Update type Important A security issue has been identified in a Microsoft software product that could affect your system You can help protect your system by installing this update from Microsoft For a complete listing of the issues that are included in this update see the associated Microsoft Knowledge Base article After you install this update you may have to restart your system More information MS - Vulnerability in XML digital signatures could allow denial of service November Help and Support Microsoft Support - Update for Windows for x -based Systems KB Download size KB You may need to restart your computer for this update to take effect Update type Recommended Install this update to resolve issues in Windows For a complete listing of the issues that are included in this update see the associated Microsoft Knowledge Base article for more information After you install this item you may have to restart your computer More information Data corruption occurs on iSCSI LUNs in Windows Help and Support Microsoft Support - Update for Windows for x -based Systems KB Download size KB You may need to restart your computer for this update to take effect Update type Recommended Install this update to resolve issues in Windows For a complete listing of the issues that are included in this update see the associated Microsoft Knowledge Base article for more information After you install this item you may have to restart your computer More information Event when you copy an encrypted folder to EFS shared folder in Windows Help and Support Microsoft Support Really need some help solving this mess Any advice is more than very well appreciated OS Name Microsoft Windows Professional Version Service Pack Build Other OS Description Not Available OS Manufacturer Microsoft Corporation System Name DURITOS System Manufacturer Dell Inc System Model Dell System Vostro System Type x -based PC Processor Intel R Core TM i - M CPU GHz Mhz Core s Logical Processor s BIOS Version Date Dell Inc A SMBIOS Version Windows Directory C Windows System Directory C Windows system Boot Device Device HarddiskVolume Locale United Kingdom Hardware Abstraction Layer Version quot quot User Name Duritos Nino Time Zone GMT Daylight Time Installed Physical Memory RAM GB Total Physical Memory GB Available Physical Memory GB Total Virtual Memory GB Available Virtual Memory GB Page File Space GB Page File C pagefile sys I O Port x - x F Direct memory access con... Read more

A:Dell Vostro 3450 (many !!!) problems

Hi and welcome to TSF lets see if you can get the dmp file follow the instructions here http://www.techsupportforum.com/foru...ta-452654.html

http://www.techsupportforum.com/forums/f217/dell-vostro-3450-many-problems-875042.html
Relevancy 44.29%

Hello

I am thinking about buying a new computer, and was wondering which is the better video card

Nvidia 8400GS

or

ATI 3450 or 3650
 

A:nvidia 8400GS vs ATI 3450/3650

Even 3450 is a bit better than the 8400 GS, not to mention the dud parts used in 8400 GSes. 3650 wins the race by miles.
However, all of the three are very weak, and for intensive tasks, like gaming, you'd be better of getting the cheapest and saving money for an actually good card (4670 or 9600 GT or higher) These would however need a power supply upgrade too, sooo...
 

https://forums.techguy.org/threads/nvidia-8400gs-vs-ati-3450-3650.830422/
Relevancy 44.29%

dell latitude 3450 is not starting, not even charging ,i have tryed all that i know , i have removed the battery and hold on to the power button for 15 seconds  still not working , please what can i do , please 

http://en.community.dell.com/support-forums/laptop/f/3518/t/19994234
Relevancy 44.29%

I have been using a _NEC 3450 for a while in windows xp
and now i upgraded to windows 7 and this happens
I cannot find anything on this dvd drive and its kinda urgent as I cant install any games or anything.

A:Need _NEC 3450 downloads / driver

Visit this site and download the driver, then check if there is an update for-it.

Download Nec ND-3450A firmware 1.03 Driver for Windows 9X/ME/NT/2K/XP/2003/Vista/XP X64/2008 - Softpedia
Good luck

http://www.sevenforums.com/drivers/226798-need-_nec-3450-downloads-driver.html
Relevancy 44.29%

Hello, I had installed Windows 8.1 from 7, and when I need drivers, of Catalyst this apears:

I downloaded ver. 13.9 Legacy., can you help me?

Additonaly, look these...:

(Yes, It is in Spanish)
Only I cant put 1024x768 resolution, but my monitor is 1366x768...
(Sorry for bad English, I am from Spain)

A:AMD Club Radeon HD 3450 AGP Drivers?

ItsTimeToGo, welcome to the Eight forums.

First thing is that the driver you tried to install does not support your card. With your card being AGP you need this one,

AMD Catalyst? 12.6 Driver Download for AMD Radeon? AGP Graphics Products: AMD Radeon HD 4xxx, AMD Radeon HD 3xxx and AMD Radeon HD 2xxx series of products

and even then it still may work. That all depends on whether Windows 8.1 comes with a working AGP driver (part of the chipset, and totally separate from the video driver), and is needed for the video driver to install and work properly.

http://www.eightforums.com/graphic-cards/35706-amd-club-radeon-hd-3450-agp-drivers.html
Relevancy 44.29%

Hello

I need a working driver for this AGP card on windows 2000 . Thanks in advance.
Club 3D Radeon HD 3450 AGP Edition

Fabrikantcode
CGA-3452
Artikelnummer
262845
Merk
Club 3D
 

https://forums.techguy.org/threads/windows-2000-driver-for-hd-3450-agp.1163570/
Relevancy 43.86%

I wanted to change my power and sleep settings for my display.

At first it didn't seem to work. Working through it methodically however, I found there are FOUR places that can be set for the same thing!

(1) Win10 Start/Settings/Display/Power&Sleep. I set it to never

(2) Below that in Additional Power Settings I was taken to the Control Panel. Checking the Preferred Plan settings the screen setting didn't reflect the change above.

(3) From the CP is another option: 'when to turn off display'

(4) Finally there are the "advanced power settings".

This is ridiculous. Surely all I need set is the initial (1) Settings? And this doesn't even include setting the Screen Saver which seems to be over-ridden by the other settings!

Obviously Microsoft have got their knickers in a bit of twist with some settings undertaken in Settings and others still in CP.

A:Build 10547 confusing power&sleep settings

I have seen someone who said it takes a restart to make the changes work for that setting. Did you find this to be true? Did settings work for you?

http://www.tenforums.com/windows-insider/25818-build-10547-confusing-power-sleep-settings.html
Relevancy 43.86%

Hi,

I built a new DIY PC, Asus P10 MB, I7-6770K CPU, 16GB Corsair RAM, onboard video only cklean setup I thought.
Need PC for security NVR (24/7 operation. I cant go 12-30 hrs without a deep freeze on the screensaver page.
Must hard power Cycle to regain normal operation.

I followed BSOD instructions, please see attached Zip file

any guidance would be much appreciated,

thanks Vince

http://www.tenforums.com/bsod-crashes-debugging/65277-new-64-bit-build-os-freezes-every-12-30-hours-power-cycle-required.html
Relevancy 43.86%

Hey everyone!semi new build(upgraded mobo), after installing everything, the pc will not post, I am not getting any power to the keyboard/mouse and the psu fan as well as other fans seem to be running kind of sluggish. Previously I had an issue where the hdd light would stay constant however that was solved with reseating the cpu a few times and resetting the cmos.specs are found here: http://ca.pcpartpicker.com/p/ccjfsYAlso, previous motherboard fried after plugging in earphones to front header. Could the psu have gone as well? Tested the new mobo today with known working ram and graphics card to no avail, so I have ruled those out.

A:Help! Semi new build, No post, no power to keyboard, no display

Nickdangelo6, This is not a direct answer to your problem with you new build. Instead, I am going to talk about how to approach your vendor and ask for help with doing return on an item the did not work ever.Just tell the vendor that you have worked with personal computers parts before and you have friends that advice you. Tell them you were very careful when putting things together and used only compatible things.Do not mention anything that might even suggest you did anything wrong. Because you did not do anything wrong.Be polite and talk in a manner that shows you are confident and want the vendor to arrange for a way to replace the bad board.I do hope that will help you. 

http://www.computerhope.com/forum/index.php/topic,155953.0.html
Relevancy 43.86%

OK just built an new PC everything is working great but I have strange issues if I Kernel-Power (63) ID:41 Event Build Category New Task switch off power by the mains then switch it New Build Kernel-Power Event ID:41 Task Category (63) back on then turn on the PC it starts to boot for seconds then turns off then restarts again and boots normally Randomly last night it randomly restarted twice out of nowhere all I was doing was downloading games on steam and browsing the web I then checked the event viewer and I see Critical error Kernel Power event ID now I'm using the pc now the exact same way as I was last night but no restart New Build Kernel-Power Event ID:41 Task Category (63) and I do not know what this error means or how to go about solving it Here is the event log - lt Event xmlns quot http schemas microsoft com win events event quot gt - lt System gt lt Provider Name quot Microsoft-Windows-Kernel-Power quot Guid quot C B A- - C -AC E- C D B quot gt lt EventID gt lt EventID gt lt Version gt lt Version gt lt Level gt lt Level gt lt Task gt lt Task gt lt Opcode gt lt Opcode gt lt Keywords gt x lt Keywords gt lt TimeCreated SystemTime quot - - T Z quot gt lt EventRecordID gt lt EventRecordID gt lt Correlation gt lt Execution ProcessID quot quot ThreadID quot quot gt lt Channel gt System lt Channel gt lt Computer gt Aaron-PC lt Computer gt lt Security UserID quot S- - - quot gt lt System gt - lt EventData gt lt Data Name quot BugcheckCode quot gt lt Data gt lt Data Name quot BugcheckParameter quot gt x lt Data gt lt Data Name quot BugcheckParameter quot gt x lt Data gt lt Data Name quot BugcheckParameter quot gt x lt Data gt lt Data Name quot BugcheckParameter quot gt x lt Data gt lt Data Name quot SleepInProgress quot gt false lt Data gt lt Data Name quot PowerButtonTimestamp quot gt lt Data gt lt EventData gt lt Event gt Thanks in advance

A:New Build Kernel-Power Event ID:41 Task Category (63)

Hello xcvtop.

Kernel-Power Event ID:41 indicates to abnormal shutdown ... it may be caused by various reasons. If you post it following the Blue Screen of Death (BSOD) Posting Instructions, it may give us some more hint about what actually is going on there.

http://www.sevenforums.com/bsod-help-support/301595-new-build-kernel-power-event-id-41-task-category-63-a.html
Relevancy 43.86%

HI techguyforums ive posted many tiems about my blue screen of death i finally figured out the problem that was causing the BSOD it was the graphics driver my computer was bought years ago its a quad core with a HD radeon series graphic cards It came with VISTA so my radeon 3450 please HD driver issue ati help BSOD problem is when i install windows and i install all the updates for some stupid reason windows always tries to install these two optional updates radeon hd radeon hd and when i install these my damn computer gets the BSOD ANd since my graphics card is HD i went on to the website to download the latest driver for it that driver on the damn AMD website gives me the BSOD too its definetely ati radeon driver HD 3450 BSOD issue please help a driver issue so my question is how can i get the correct graphics card driver catalyst control centre without getting the BSOD right now im on vista but i cant get the right graphics driver please help me find the right one so i avoid all BSOD thanks nbsp

A:ati radeon driver HD 3450 BSOD issue please help

I'm having the same problem.. did you ever get it fixed? If so, please share how!
 

https://forums.techguy.org/threads/ati-radeon-driver-hd-3450-bsod-issue-please-help.987948/
Relevancy 43.86%

Hi all, (sorry for my bad english!)
i installed Windows 7 Professional 32bit on this computer:

Motherboard: ASUSTeK P4S8X (PGA 478)
RAM: 2 GB DDR
CPU: Intel Pentium IV Northwood @2,53 Ghz
GPU: Sapphire Radeon HD 3450 512MB DDR2 (AGP)

My GPU is compatible with Aero, why I can't use it? I tried to install all windows drivers, but it doesn't work...

A:Sapphire Radeon HD 3450 AGP driver problem

Dorado, welcome to the Seven Forums.

try the steps here to get the driver for it installed,

ATI Radeon HD 3650 AGP install problem

http://www.sevenforums.com/graphic-cards/200451-sapphire-radeon-hd-3450-agp-driver-problem.html
Relevancy 43.86%

Dear.
I'm from Vietnam. I can't install driver Intel HD Graphics 3000 for my computer. This is a laptop Dell Vostro 3450 Core i5, Windows 7 Ultimate 64bit.
When I install driver Intel HD Graphics 3000 for VGA Onboard (include: R304300, R294607, R294609, R302025) then I receive an error message:
"This computer does not meet the minimum requirements for installing the software"
Help me, please. Thanks.
-------------------------
Name: Nguyen Quoc Vuong
Mail: [email protected]

http://en.community.dell.com/support-forums/laptop/f/3519/t/19990635
Relevancy 43.86%

The newest driver won't installed even if it original driver.. video card is working on epsa testing.. what should i do?? Please help me.. thanks in advance

http://en.community.dell.com/support-forums/laptop/f/3519/t/19988593
Relevancy 43.86%

Which combo should I choose bw:
1. core i5 2320(3 ghz) and Sapphire HD 7850 1gb,or
2.core i5 3450(3.1 ghz) and HIS HD 6870 iceQ X

Prices are the same...it will be used for playing game ssuch as AC 3,Crysis 3 etc
 

A:Which combo: i5-2320 + HD 7850 or i5-3450 + HD 6870?

Why not the 3450 and 7850?
Depends where you live but the 1GB 7850 is only slightly more than a 6870 which is an older generation and a bit overpriced nowadays.
 

http://www.techspot.com/community/topics/which-combo-i5-2320-hd-7850-or-i5-3450-hd-6870.187185/
Relevancy 43.43%

I ve been asked to help Solved: on video doesn't power-up produce New home-build a friend s son get his newly built machine running I haven t seen the machine yet but the problem seems to be that the machine isn t sending any video signal to the monitor I have no experience with putting a machine together So I asked him some basic questions about the components he used to build Solved: New home-build doesn't produce video on power-up the machine and a little more info on the symptoms of the problem The following is the information I got back I asked him what he based is component selections on and what he chose - - I researched and selected the parts by hand as well as with advice from others My cpu is an Intel I - k That s cooled by a corsair h i water cooler My gpu is an Asus I ve got sticks of corsair ram at gb a piece My motherboard is an Asus ROG maximus VI gene Other than that it s pretty standard with an optical drive a tb hard drive And a gb ssd In response to my questions regarding what symptoms he is getting - - When I boot it up certain fans spin including the power supply the gpu and a few to cool the case but some in the case don t spin The motherboard lights up but doesn t beep The monitor is brand new and displays a blue screen when inactive it just doesn t recognize that anything is connected to it I have no experience in selecting compatible decent quality components I d be interested in any opinions regarding whether the selections he made are well chosen He didn t provide me with any information regarding what he has for the case and power supply Also any suggestions regarding what to look for in diagnosing this would be much appreciated I won t be able to look at the machine until the end of next week In the mean time I m going to read through the relevant sticky posts in this forum and try to get a little up to speed nbsp

Relevancy 43.43%

I just finished building my system a couple weeks ago but I am getting a blue screen again after trouble shooting New Error: build, 0x8000000000000002 Microsoft-Windows-Kernel-Power the ones I could I have gotten of them in the last days and they all seem to be the same one from what I can tell The last two days I have turned my computer on but did not log on Both times sometime during the day I would come to find the BSOD Thanks for any help Wes OS Windows Professional New build, Microsoft-Windows-Kernel-Power Error: 0x8000000000000002 SP -bit - System Builder Malware ESET Smart Security V Chassis Corsair Graphite T Mid-Tower PSU Corsair AX W Gold Plus Motherboard ASUS P Z -V PRO New build, Microsoft-Windows-Kernel-Power Error: 0x8000000000000002 GEN LGA CPU Intel i - K Sandy Bridge Quad-Core GHz CPU Fan Corsair H Liquid CPU Cooler Graphics NVidia GeForce GTX Ti GB DDR PCI-E x SLI setup Memory Corsair Vengeance GB x DDR SDRAM Dual Channel MHz OS Hard Drive Corsair Force GB Internal SATA GB SSD Data Storage Seagate Barracuda TB GB Internal SATA RPM MB Cache Optical Drive LG x Internal Blu-ray New build, Microsoft-Windows-Kernel-Power Error: 0x8000000000000002 Disc Double-Layer DVD RW CD-RW Optical Drive LG Super-Multi x Internal DVD RW CD-RW Monitor Dell Ultra Sharp U Widescreen LCD

Relevancy 43.43%

hey
well i am new to this lark, but i decided to build a pc without knowing really what i was getting myself into

okay, so i haven't got it working as of yet, no power to keyboard or mouse, both usb, and no output to monitor. lights and fans all come on though? so that means there must be some power?

i have removed everything but the mobo, psu, cpu and screen/mouse.
also, have 2 processors and it doesn't work with either
the motherboard was sent back to the supplier to check for faults but it works fine apparently.
No video cards or anything like that.

I'm at a bit of a loss really

like i said i haven't even got it working yet!

help much appreciated

jamie x
 

A:Newbie PC build no power to keyboard/mouse, no output to monitor

complete specs would be nice; it would give us an idea of what hardware you're using. it could be something as simple as an underpowered PSU or faulty RAM. make sure the processor is seated correctly and that the memory sticks are properly clipped into place.
 

http://www.techspot.com/community/topics/newbie-pc-build-no-power-to-keyboard-mouse-no-output-to-monitor.157498/
Relevancy 43.43%

as stated above, with regards to gaming, i have the 3450 quad core at 3.1ghz not over clocked, but alot of the games i play(racing) ask for a core 2 duo between 2.4 and 3.1 ghz, is there anything i should know?

and please don't tell me about what i don't have, im aware i don't have a hardcore gaming cpu but im not running online or competing against anyone but myself
 

A:Solved: whats the major difference between core 2 duo and an i5 3450

Those games where more than likely out before your 3450 was. Your 3450 is light years ahead of any core 2 duo.
 

https://forums.techguy.org/threads/solved-whats-the-major-difference-between-core-2-duo-and-an-i5-3450.1073086/
Relevancy 43.43%

Hello I just bought a brand new Asus Radeon HD http asus com products aspx l amp l amp l amp l amp model amp modelmenu and as the title says I m getting some major graphic problems in all 3450 HD graphic major corruption Radeon Asus d applications Some screenshots showing how it looks like Racedriver GRID GTA San Andreas WoW notice the night elf s lazor sight The Elder Scrolls Construction Set This happens in every single d application Aside from the visible glitches all games run smooth I m able to comfortably play GRID on x and low details or I would be able to if I only could see the road It might seem like an overheating issue but according to the Catalyst Control Center the GPU temperature is always around C even lower when idle which should be pretty accurate as I have Asus Radeon HD 3450 major graphic corruption an additional fan blowing directly on the GPU heatsink The card is not overclocked I have tried reinstalling the drivers tried an older version too Catalyst currently running on as well as the Omega drivers Nothing helped My PC Intel Asus Radeon HD 3450 major graphic corruption Core Duo E GHz GB DDR Ram Kingston ValueRam ASRock CoreDual-SATA R motherboard Chieftec W power supply Windows XP SP I would appreciate any help Thanks in advance nbsp

Relevancy 43.43%

I want to Restore my laptop to the factory settings.  I pressed the F8 key to get to the Advanced Boot Menu and selected the Repair Your Computer option.  Instead of taking me to the menu with option for me to do the restore, the machine continued to boot.  I tried many times, but with no success.  Please help.  Thanks in advance.

A:Restore Vostro 3450 Laptop to Factory Settings

Hi Sujatha Maidum i m farooq my laptop dell latitude 3450 my os is windows 8.1 oem my laptop is upgrade windows 10 how to remove windows 10 plz help me

http://en.community.dell.com/support-forums/laptop/f/3518/t/19512824
Relevancy 43.43%

I am going to buy Assus T3-P5G31 barebone computer. It has motherboard based on Intel G31 chipset with integrated Intel GMA 3100 graphic chip. will use my computer mostly for 2D applications, editing photos, watching movies. I will not use it for gaming.

How does integrated Intel GMA 3100 graphics compare to Sapphire RADEON HD 3450 512mb graphic card? Would adding this RADEON graphic card improve the graphical performance of my computer for my needs?

I am asking this because while motherboard has a slot for dedicated graphic card I would like to keep power consumption (actually noise) lower.

Thanks,
Dominik
 

A:Solved: Intel GMA 3100 versus ATI RADEON HD 3450

Radeon HD 3450 is quite a lot better, definitely worth the 30 $ or so.
 

https://forums.techguy.org/threads/solved-intel-gma-3100-versus-ati-radeon-hd-3450.796514/
Relevancy 43.43%

The picture does not fill the screen on my laptop. It has a setting of 1280 X 800. I need to have a 16:10 ratio to fill the screen. How do I get it when its not an opt? It said it was supported in siw report but I can't load it. ???

A:dell studio 1535 /w ati mobility radeon HD 3450

DJH mate try downloading the driver from here and see if the Catalyst control Centre will let you scale the screen.

Oops http://support.amd.com/en-us/downloa...Windows+7+-+64

http://www.sevenforums.com/graphic-cards/315727-dell-studio-1535-w-ati-mobility-radeon-hd-3450-a.html
Relevancy 43%

Hi New member - please be gentle if I haven't followed the correct procedures Okay I rebuilt my PC completely following a mobo failure retaining the hard drives I was really impressed Win Ult x booted straight into the desktop I removed old mobo drivers added new ones errors state) Build BSOD Machine 9F power randomly New (driver Had a few glitched with the USB ports which I think I fixed by deleting and reintalling new drivers I have had some BSODs - one after the other just New Build Machine BSOD 9F (driver power state) errors randomly now and at least earlier one while the machine was unattended In each case it was a BCCode f and I got the error message driver power state failure Now I have the crashdrump logs I think it has zipped but I know the most recent one related to the crash I just saw is called - On a whim in the interim I have also just now uninstalled the Asus AI Suite that came with the mobo Asus z pro gamer as I know it has an energy management module and even though I have tried to disable that anyway I thought might be a cause for error I would be most grateful for help in tracking down the cause of this error and advice on fixing it please Thanks

http://www.sevenforums.com/bsod-help-support/386653-new-build-machine-bsod-9f-driver-power-state-errors-randomly.html
Relevancy 43%

This hard drive came in an Acer Aspire computer I bought brand - Asprire failure 3450 Model Disc Acer in error new In under a hours use the original hard drive failed I sent the computer back and Acer replaced the HD with a new one different serial number - same model I was using win and Advanced System Care ASC kept detecting a disc error In a short time under more hours of use the new drive failed entirely It was now out of warranty - I reformatted the drive and tried to recover from my WD My Cloud but that data was corrupt or missing something So I used the Acer recovery disc which brought it back to as purchased condition However ASC again detected this disc error I ran Data Lifeguard Diagnostic quick test and it passed I then ran the extended test which it failed and used the fix utility The error then stopped occurring in ASC but the error returned a couple of weeks later I ran the extended and fixed it again I then upgraded to Win and after that the disc error again appeared I ran Lifeguard extended and fixed it again It showed clean in ASC It has now been about weeks and once again the disc error has reappeared How can I fix this once and for allIt will take me several months to get my computer back to its precrash state I need a solution please Here is the current quick test but it will fail an extended if I run it Test Option QUICK TESTModel Number WDC WD EARX- PASB Unit Serial Number WD-WCAZAD Firmware Number AB Capacity GBSMART Status Not AvailableTest Result PASSTest Time July

http://community.acer.com/t5/Aspire-Desktops/Disc-error-failure-in-Acer-Asprire-Model-3450/td-p/442933
Relevancy 43%

Hi I have a problem with some but not all text boxes aka tooltips I think in Windows the ones that pop-up when you hover over some elements like caption buttons in windows or the start orb in the taskbar The fonts in text within are chopped or replaced by a thick black bar The same happens with some but again not all of the text 3450 (... rendering issue HD text) updating after Font (tooltip boxes belonging to icons' descriptions in different programs e g Total Commander v a paint net Font rendering issue (tooltip text) after updating HD 3450 (... v and in drop down menus for font size in MS Word Libreoffice Writer etc I added a screenshot at the bottom This problems started right after updating to AMD Legacy driver year available here All is back to normal if I revert to the driver provided by HP but it is an old one available here and for example some games and programs and functionalities that rely on newer OpenGL won't work Is there any way to update without the aforementioned problems Any insights will be welcomed nbsp nbsp My system specs Graphics nbsp nbsp ATI Mobility Radeon HD Resolution nbsp nbsp nbsp x x hertzProcessor nbsp nbsp nbsp Intel R Core TM Duo T nbsp GHzBIOS Version Date nbsp nbsp nbsp Hewlett-Packard PCD Ver F RAM GB x GB Mhz OS Windows Professional SP build bit

http://h30434.www3.hp.com/t5/Notebook-Video-Display-and-Touch/Font-rendering-issue-tooltip-text-after-updating-HD-3450-ATI/td-p/5801123
Relevancy 43%

hello,
I have upgrade to windows 10, and I need to update my Graphics Card.
I have Dell Vostro 3450.
Thank you,
Mic

http://en.community.dell.com/support-forums/laptop/f/3518/t/19983511
Relevancy 43%

This hard drive came in an Acer Aspire computer I bought brand new In under a hours use the original hard drive failed I sent the computer back and Acer replaced the HD with a Acer error in Model Asprire 3450 - Disc failure new one different serial number - same model I was using win and Advanced System Care ASC kept detecting a disc error In a short time under more hours of use the new drive failed entirely It was now out of warranty - I reformatted Disc error - failure in Acer Asprire Model 3450 the drive and tried to recover from my WD My Cloud but that data was corrupt or missing something So I used the Acer recovery disc which brought Disc error - failure in Acer Asprire Model 3450 it back to as purchased condition However ASC again detected this disc error I Disc error - failure in Acer Asprire Model 3450 ran Data Lifeguard Diagnostic quick test and it passed I then ran the extended test which it failed and used the fix utility The error then stopped occurring in ASC but the error returned a couple of weeks later I ran the extended and fixed it again I then upgraded to Win and after that the disc error again appeared I ran Lifeguard extended and fixed it again It showed clean in ASC It has now been about weeks and once again the disc error has reappeared How can I fix this once and for allIt will take me several months to get my computer back to its precrash state I need a solution please Here is the current quick test but it will fail an extended if I run it Test Option QUICK TESTModel Number WDC WD EARX- PASB Unit Serial Number WD-WCAZAD Firmware Number AB Capacity GBSMART Status Not AvailableTest Result PASSTest Time July

http://community.acer.com/t5/Aspire-Desktops/Disc-error-failure-in-Acer-Asprire-Model-3450/td-p/442933/jump-to/first-unread-message
Relevancy 42.57%

I have a Dell Vostro 3450 running Windows 10 and I have a issue with my laptop screen (please see the attached photo)  .

This issue comes only when I use my laptop screen sometimes and it goes away after some time but when I connect it to a external monitor the screen display works perfectly. I tried taking a screenshot of the laptop screen when this issue happens but the screenshot doesn't show this issue. What may be the problem and can this issue be fixed ?

A:Display problem in Dell Vostro 3450 (Horizontal colored lines)

Hi,
Based on the troubleshooting performed if the display is good on external screen then the systemboard works fine. Now that the issue is seen only with the laptop screen I would ask you to initiate the LCD BIST( Built in Self Test) on the system.
To initiate LCD BIST restart the system along with the FN key pressed or restart the system and keep tapping the D-Key. During the test solid colours will be displayed on the screen if the distortion is displayed during the test its confirmed that the screen is faulty.
Regards,

http://en.community.dell.com/support-forums/laptop/f/3519/t/19659581
Relevancy 42.14%

Dear Dell Comm I use Dell vostro and years no problem with that suddenly trouble come when i open Google Chrome it go to Bluescreen and after that i never could open Chrome anymore when i try to uninstall and reinstall chrome it go nbsp bluescreen while still in progress been try registry cleaner nbsp but still BSOD Last big thing i did was nbsp i install fresh win Radeon - Win 6630 Dell problem vs 7 auto Intel 32bit switch HD - 3450 when i instal chrome without VGA driver installed the chrome installation is succes and nbsp i can use chrome but then i install the radeon driver that time the chrome cant operate and go to BSOD again So i identify that the problem Dell 3450 auto switch problem Radeon 6630 vs Intel HD - Win 7 - 32bit is VGA I cant install the Intell HD driver it said that my comp doesnt meet minimum requierment specs so i directly instal radeon driver and it also get the Intel HD driver together in it this far the installation of VGA driver is success but still problem if i use chrome or safari No i can still open chrome if i disable the Radeon but it become x resolution I dont know whats or where nbsp the really problem is how i call this problem and what have to do so i can open chrome with x high performance programs i have a clue that the problem is when the VGA is switching from Intel HD to Radeon maybe the Radeon not ready to receive the job or The Intel HD dont want to release the work that swith to Radeon so they Crash or maybe im wrong D o yah the bluescreen said atikmpag sys error code but i have tried some methode about expand the atikmdag sys or kind of that but stil not work So help me please Sorry for poor english Every suggestion and help would be very appreciate Regards amp Thankyou Joseph

A:Dell 3450 auto switch problem Radeon 6630 vs Intel HD - Win 7 - 32bit

Hi I am facing the same issue from last 2 days.
I have formatted the entire system and installed fresh Windows 7
I have updated the driver but instead of getting solved, the computer started hanging frequently. So I formatted again and installed the old driver again. But the problem is still there.
I have run the Diagnostics but there were no errors.
Please suggest a solution.
Regards
Suvro

http://en.community.dell.com/support-forums/laptop/f/3519/t/19655280
Relevancy 42.14%

i am facing problem with Hard disk loose contact issue with Latitude 3450 and it is happening very frequently is there any solution for this 

A:Hard disk loose contact issue with Latitude 3450 any permanent solution for this?

Hi

Please re-seat the HD once and observe the system.
Regards

http://en.community.dell.com/support-forums/laptop/f/3518/t/19651372
Relevancy 39.56%

I recently upgraded my motherboard, processor and memory, then installed a fresh copy of Windows 7 x64 Pro. I've been having problems from day 1. Originally, the computer would hang at either "logging off" or "shutting down" whenever I'd try to restart the machine (which is frequently when you're having to install drivers and programs). Now, it will still hang, but will then BSOD on me.

I've also come home once or twice and found that it'd BSOD'd while I was away. I think I've updated all the drivers, but like I said - I've been having issues from the start, and I'm not sure everything finished installing cleanly.

BSOD error has consistently been "Driver Power State Failure".

Any help would be greatly appreciated. Dumps attached.

Thanks!

A:BSOD with "Driver Power State Failure" -new build - hangs on shutdown

I'd still love to know what was messing my system up, but I ended up doing a complete reinstall anyway.

My Windows 7 key is an upgrade key, and Microsoft makes finding install media unnecessarily difficult. The image I used the first time was a bit... sketchy. I'm hoping that this time around I won't have the same issues, but I guess only time will tell.

http://www.sevenforums.com/bsod-help-support/398526-bsod-driver-power-state-failure-new-build-hangs-shutdown.html