Windows Support Forum

Bios Beep and keyboard problem

Q: Bios Beep and keyboard problem

Hi there Been Bios and problem Beep keyboard looking around the internet for answers to my problem but didn t find any My computer beeps continuously Bios Beep and keyboard problem at startup When windows loads it stops There is no pattern in the beeping My Bios in Insyde H can t get in advanced mode by the way After startup the quot sign is appearing in the logon textbox a few times And the letter d is not working Bios Beep and keyboard problem A week ago I had a lot more letters not working and also a beep at startup Used an external keyboard and disconnected the laptop keyboard from the motherboard Problems were gone So I ordered Bios Beep and keyboard problem a new laptop keyboard replaced the old one and the beeping started all over again and I m still pasting the letter d The on screen keyboard works fine Sometimes when I use a few programs simultaniously the CPU temperature gets pretty high but that has happened before did a ram test and no problems found Malwarebytes Can t find anything What else can it be I have a Packard Bell easynote tk laptop and use Windows ultimate bit Thanks in advance Tom nbsp

Relevancy 100%
Preferred Solution: Bios Beep and keyboard problem

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Relevancy 65.79%

Hello

Here is my problem I have a Compaq presario with a frozen bios screen but cpu ok, mem ok, video ok, nothing is conected and power supply ok.
any ideas?

A:Compaq bios freeze short beep long beep

Is the beep pattern just one short one long? Check your manual for the POST beep codes to determine what it is telling you. All POST beep codes are different so there's no way to tell unless we know exact model of your PC. The manual usually has the beep code in it, though.

http://www.techsupportforum.com/forums/f299/compaq-bios-freeze-short-beep-long-beep-624227.html
Relevancy 65.79%

Hi all,,,,,,,,,,could someone help me please,
I have a MSI ms-7369 1.0 board with a ami v2.4 bios and at bootup
I get 2 beeps a pause and then another 1 all of the same duration.
Could someone tell me what they mean and how to check and fix it please.
Len
 

A:bios beep problem

You have a RAM issue
it could be any number of things
Check the RAM is installed correctly
One or of the modules are bad or incompatible
The RAM timings set in the BIOS do not match the RAM
 

https://forums.techguy.org/threads/bios-beep-problem.760695/
Relevancy 55.47%

When I boot up my pc, the first thing that happens is it goes to the post screen. Then it asks you to press f1 to continue or delete to go to setup. This is how it has started up everytime, and I would just press f1 and continue with boot up successfully. Now all of a sudden, my wireless usb/keyboard doesnt work at all and neither does my wired usb or ps/2 keyboard. So, I can't even use my computer anymore because I can't get past the post screen. Any ideas?
 

A:Serious bios/usb/keyboard problem

If you hit DEL can you enter setup?
 

http://www.techspot.com/community/topics/serious-bios-usb-keyboard-problem.95316/
Relevancy 55.47%

my ps2 and usb keyboard wont work in the bios.
the pins are fine, the computers brand new, its plugged in all the way. ive already tried to clear cmos, but it still doesnt work
 

Relevancy 54.61%

Hey guys how's everyone let me get to the point i recently installed windows as you all know when you install vista if your option is to install from the beginning vista keeps a folder name old windows in your hard drive which takes up space so i wanted to install the windows from the beginning which i know if i have a bootable cd i need to first go to bios here is one problem when i go how to bios? [SOLVED] fix problem keyboard in to bios i don't know why but i have exactly - seconds of time to initiate anything when i go to bios after exact - seconds my keyboard would freeze i don't know if my computer is frozen too or not since the keyboard is the one to let me know if it is working or not i tried changing the keyboard which i first thought was the problem but no luck exactly same thing happens on the second keyboard i am trying to go to the bios so i can change the boot sequence to cd rom do you guys know how to fix this now for the os info i am currently running Microsoft Windows Vista Home Premium version system type x -based pc processor AMD Athlon tm x dual core processor mhz cores bios version date Phoenix Technologies LTD ASUS M N-E SLI Acpi Bios revision BOOT DEVICE Device HarddiskVolume Total physical memory MB Let me know if you guys need any other info Thanks a lot

A:[SOLVED] how to fix keyboard problem in bios?

I would reinstall with the second keyboard you have and go from there.

http://www.techsupportforum.com/forums/f217/solved-how-to-fix-keyboard-problem-in-bios-323252.html
Relevancy 54.61%

Hello SF Members!

Now, I'm back from long holiday, and have to ask something and have problem.
Like title say : I can't use keyboard and mouse in BIOS.

That problem start some days ago. Before this there wasn't any problem, all worked very well. But yesterday, when I entered in BIOS, mouse cursor is at bottom, and can't move it, and keyboard don't work (I can use mouse and keyboard in BIOS)...

How to fix that problem ?

Motherboard is ASUS P8H61-M LX2.

Thanks in advance.
Trinty

A:{PROBLEM} I can't use keyboard and mouse in BIOS

The first thing I would try is a CLRTC or hard reset.

Legacy CLRTC Procedure
Note all your current BIOS settings
Shut down the computer > remove the power cord.
Remove the 3v battery.
Move the CLRTC jumper from pins 1-2 to 2-3.
Touch a metal part of the case and Press and Hold the reset button for approx. 30 seconds to discharge all power from the board.
Put the CLRTC jumper back on pins 1-2.
Replace the 3v battery > replace the power cord > boot.
Immediately go back into BIOS and reset all your preferred settings. If the CLRTC worked you will need to reset the date and time.
From your motherboard's web page, it seems we don't need to remove the battery anymore. YMMV.

http://www.sevenforums.com/hardware-devices/262899-problem-i-cant-use-keyboard-mouse-bios.html
Relevancy 54.61%

Hi All

First time poster looking for some help!

I have a Compaq 615 running Windows 7. Recently, I have heard a beeping sound that isnt too disimiliar to the BIOS beeps on start up. However, this can be heard when the OS is running.

There is no set pattern to the beeps. It can occasionally be 2-3 beeps very close together but is mostly just one beep. It is starting to worry me a little.

Here are a list of things I've done to try and resolve already:

Remove an USB devices that have been plugged in
Clean the keyboard with compressed air incase this was caused by a stuck key
Ran system check
Cleaned up the C-Drive
Ran a HDD check from booting up
Checked eventvwr

All this without anything indicating that something is wrong with the system. Can you help?

Thanks

Paul

A:Beep From Behind The Keyboard

are you sure you are using the correct power cord?

i would also try running a memory test like memtest86

http://www.sevenforums.com/general-discussion/143075-beep-behind-keyboard.html
Relevancy 54.61%

Hey everyone, my first post on here, and since I am running Vista I figured I would post it in here. Honestly I can't tell if this is necessarily related to Microsoft, or if it is Lenovo that is messing me up here.

I am running a Lenovo t60p thinkpad that I got earlier this year. Most of the stats shouldn't be needed here, because I am just trying to fix one little thing. For a number of games I play on this computer I need to be able to press more than three keys at once, and when I do on this computer it cancels the keystrokes after the third and gives me a beep to indicate that it did so. I would really like to make that stop happening, so if anyone has any ideas I would very much appreciate it. Thanks!

A:Keyboard Beep

It means that keyboard can only a maximum of 3 keys pressed at one time, there is nothing you can do to change that. Most USB keyboards can have more than 3 pressed. You should try looking for a gaming keyboard as they can have lots more keys pressed at the same time. Most Microsoft USB keyboards can have more than 3 keys pressed

http://www.techsupportforum.com/forums/f217/keyboard-beep-195980.html
Relevancy 54.18%

I ve recently put together a computer everything is connected correctly to my knowledge and a professional looked over my work when it was brought in for diagnostics unfortunately they didn t know much about bit motherboards The components used are as follows Case Thermaltake Soprano Motherboard ASUS A N-SLI Processor AMD Athalon RAM Kingston x Video Card Sapphire ATI Radeon x Hard Drive Hitachi Gb SATA Power Supply Coolmax Watt BIOS a Not Even Beep CD Drive Optorite DVD -RW Currently the system will turn on via power button on the case but the hdd and power lights do not turn on though they are connected to the motherboard The system makes no BIOS beep and does not beep repeatedly so I m assuming everything is fully inserted The power light on the motherboard does light up and all fans work properly The CD drive doesn t respond in any way shape or form and the monitor displays nothing There is no visible physical dammage to any of the hardware and I sent the motherboard back to be replaced and upon its return the symptoms remain the same Due to the lack of a BIOS beep I m assuming there s a problem with the Not Even a BIOS Beep motherboard The lack of response no lights and does not eject from the CD drive even though it has power seems to indicate there may be something wrong with it as well The HDD and Power LEDs could either be an issue with the case or the motherboard in my opinion but at this point I m just stuck making guesses Any suggestions are welcome nbsp

Relevancy 54.18%

Had problem recently where PC evry now and again stops with a 3 long bleep bios beep code. This happens before anything appears on screen. Problem is I cannot seem to find what this code means. There are lots of bleep code lists for amibos, but this isn't on the list

Bios is AMIbios and is the latest version for my board according to MSI


OS Name Microsoft Windows XP Home Edition
Version 5.1.2600 Service Pack 2 Build 2600
System Manufacturer MSI
System Model MS-6380E
Processor x86 Family 6 Model 6 Stepping 2 AuthenticAMD ~1666 Mhz
BIOS Version/Date American Megatrends Inc. 07.00T, 02/04/2001
SMBIOS Version 2.3
 

A:New Bios Beep ???

Take a look at this thread HERE If that doesn`t help, then you need to do some troubleshooting.

Turn off your computer, and unplug the mains cable.

Open your case, and disonnect anything not required to boot your computer.

Check all connections and cables etc.

Start with just the mobo, cpu, ram, and videocard.

If your computer still wont attempt to boot, then maybe swapping the ram may help.

If your computer does attempt to boot, then next add the hard drive, and retest.

Keep adding one component at a time untill your system doesnt boot, and that will be your culprit.

Regards Howard
 

http://www.techspot.com/community/topics/new-bios-beep.35207/
Relevancy 54.18%

I have a acer m3910 desktop pc and its good.so about last year,i have change the gpu from hd5570 to gts450.my problem is that when i switch on my pc,there's no the 'beep' sound,everything is blank on the screen.So i remove my gpu,use the onboard graphics and i boot up fine.then i install back my gpu and it boot up just fine.any ideas?happen only like 3-4 time in my one year usage of the new card.

(By the way,sorry for my english as i try to be specific as possible)

A:BIOS No Beep.

You say it only has happened 3 or 4 times in a year. That is strange. If the onboard graphics is as good, you could go with that. You might also try downloading updated drivers for the card. It is strange that the failure only happens one in a while. Let us know how this turns out.

http://www.sevenforums.com/general-discussion/263061-bios-no-beep.html
Relevancy 54.18%

The 850 G3 has a HIGLY ANNOYING BEEP when in the BIOS setup screen. Beeps for confirmation for various actions just like an Apple ][+ did in 1979! Really HP? REALLY?! Beeping was annoying then, its twice as annoying now! There is no apparent way to turn off this irritating BEEPING in BIOS. Please DO AWAY with this darned unnecessary NOISE in the next BIOS release, and don't do this again! Its bad enough that Apple brought back the "Chicklet" keyboard, and everybody else - including HP - is copying them. Chicklet keyboards were a bad idea in 1983, and are a bad idea now - just like this thrice cursed BEEPING! 

http://h30434.www3.hp.com/t5/Business-Notebooks/850-g3-BIOS-beep/td-p/5657312
Relevancy 54.18%

I am using a Logitech wireless keyboard with a USB connection.
It does not load until Windows does.
Since it does not load at the beginning, I am unable to enter my Bios in order to change it.
Is there some way to enter my Asus bios after Windows XP is booted?
 

A:Solved: Bios and wireless keyboard problem

Not after Windows has loaded that I know about.

If you need to do Bios changes, only thing I can think of is to use a regular PS/2 keyboard at startup.
 

https://forums.techguy.org/threads/solved-bios-and-wireless-keyboard-problem.856581/
Relevancy 54.18%

Hello,
During boot the way my USB keyboard works is pretty limited - only first key press works, then nothing until reconnecting keyboard. It means that to go to BIOS I must press F12, disconnect keyboard, connect it again, press down, reconnect keyboard, press down, reconnect keyboard etc. 
When I'm in BIOS it's the same. USB mouse in BIOS doesn't work at all, I can only see cursor. In both Windows and Linux, all usb devices work properly. I'm booting in legacy mode.
I disconnected all devices but keyboard, tried to connect it to all of 10 ports, issue persists. 
I couldn't find matching issue while search google and this forum. Anyone know that issue?

http://en.community.dell.com/support-forums/desktop/f/3514/t/19996649
Relevancy 53.75%

My keyboard beeps whenever I press a key and my speaker are un-muted. Running WinXP, on a Dell Inspiron 8000. Please help! :)

A:[RESOLVED] Keyboard Beep

Hi

Is this problem new?
Have you added or changed something on your system recently?

Is it whenever you press any one key at any time you hear this beeping sound or when you pres many keys at the same time?

Usually if the keyboard buffer limit is reached, it will beep to indicate this, but that's to indicate many presses/holds.

http://www.techsupportforum.com/forums/f10/resolved-keyboard-beep-160272.html
Relevancy 53.75%

When an IBM compatible computer is first turned on, the hardware runs a Power-On Self Test (POST). If errors are encountered during this POST test, they are usually displayed via an audio beep or in the form of a code number flashed across the screen. With this audio code in hand, you can determine what part of the system is having problems and find a solution.

<small>The pattern of beeps whether its the number of beeps or the length of those beeps will give you an indication of the actual problem. Its a distress signal from the computer in a morse code like pattern. Unless you have a diagnostic card to tell you more about the particular problem, you will have to use the charts below to decipher the computer error and get your machine back up and running.
Source: </small>BIOS Error Beep Codes

A:BIOS "POST" Beep Codes for AMI and Phoenix BIOS

handy.......
thanks.

http://www.vistax64.com/general-discussion/247133-bios-post-beep-codes-ami-phoenix-bios.html
Relevancy 53.75%

hi, one of our custom-built computers died (the power supply went & it took the mobo with it), so we bought a new one (WinFast K7S741GXMG). i put it in, powered up, and entered setup. as i started to change the date, it locked up. so i restarted it and now i get nothing. no screen, no beep. i took the memory out & put it back in but that didn't help. also, the power supply is brand new and so is the memory (Kingston 512MB DDR PC2100).
 

Relevancy 53.75%

Does anyone have the BIOS beep codes for the P50/P70 Thinkpads? Mine beeps at me almost every time I boot up.3 short beeps, short pause, 1 beep, short pause, 1 beep, short pause, 3 short beeps. I called tech support and they wanted me to uninstall the RAM I added after I got the system, or they want me to send the computer in to replace the RAM and system board. I don't think those are the problem, though. After it gets done beeping, it loads fine every time. Lenovo Solution Center finds zero errors with my system. No issues with processor, chipset, or memory. Windows recognizes all 32GB of my RAM when it loads as well. Any ideas? I'm disinclined to send my system back since otherwise it seems to generally be working OK.











Solved!
Go to Solution.

A:P50/P70 BIOS beep codes

Good day.
 
Beep codes...
P50 hardware manual, pg37: https://download.lenovo.com/pccbbs/mobiles_pdf/p50_hmm_en_sp40j71944.pdf
P70 hardware manual, pg45: https://download.lenovo.com/pccbbs/mobiles_pdf/p70_hmm_en_sp40j65113.pdf
3-1-1-3 is listed in both.
 
Hope this helps to clarify a bit.
Regards.

https://forums.lenovo.com/t5/ThinkPad-P-and-W-Series-Mobile/P50-P70-BIOS-beep-codes/td-p/3292159
Relevancy 53.75%

hello, I just got this laptop, and enabled boot password. I hate how it keeps making this loud beep whenever it boots. Why is it on by default and no option to change in BIOS setup. Please help, thanks.

http://h30434.www3.hp.com/t5/Business-Notebooks/bios-password-beep-HP-450-G3/td-p/5662508
Relevancy 53.75%

Hi all,
I have an ASUS P4C800 Deluxe mainboard with 512mb of corsair twinx ram in dual channels and all seems to be ok. BUT sometime lately during booting i started to get one beep - looked this up in the manual and it says this means a memory refresh error. Then i started to get one louder beep then a quieter beep straight after (or they are different in pitch or something) and two beeps by the manual means a Parity error.

If anyone has this board and/or can help me fix the problem and stop those quick, quiet yet disconcerting beeps - i would greatly appreciate it!

Thanx

Sam
 

A:AMI BIOS beep codes

Try to keep your questions in one post. It gets confusing when you repeat them, and you may miss out on the one that fixes the problem.

Your other posting is here:
http://forums.techguy.org/t169211/s.html
 

https://forums.techguy.org/threads/ami-bios-beep-codes.169202/
Relevancy 53.75%

Recently when my pc (XPS 8700) starts-up/reboots I don't hear the bios beep, the pc boots up fine and appears to be working fine, is there anything wrong?  How do I turn the beep back on?

http://en.community.dell.com/support-forums/desktop/f/3515/t/19680377
Relevancy 53.75%

I am usually Bios Beep Errors the one answering questions on here but now I need some questions answered I was working on a friends pc that wouldn't boot He said he had a power surge a few months back but it had just quit on him one day The fans would Bios Beep Errors spin the h d d light would come on but no video and no boot After looking at the board I noticed it had taken a pretty big Bios Beep Errors power surge The capacitators were all blown up and one even had black stuff seeping from it I replaced the board with the same model an ECS K VZA It was a used one I purchased from ebay After placing it in the case I still was not getting any boot I took everything out of the case and placed it on a piece of cardboard connecting only the psu memory h d d and video card It booted So I placed it back in the case using the same set up and it wouldnt boot Im figuring somethings touching the case grounding it out I purchased another case placing the hardware piece by piece and testing it as I went I came to connecting the cdrom connected the power to it and then the IDE cable it stopped booting I took the IDE cable off and it booted So I replaced the IDE cable and continued testing until I had everything back in It booted fine I ran it a few days booting off and on cold boot and warm booting I took it to his place connected everything it worked fine We removed some things he didnt want and checked his email and it ran fine The next day he called said it wouldnt boot I go over and power it up and Im getting a continuous single beep The BIOS is an Award BIOS and the error for continuous beeps was Memory Error - Memory is either damaged or badly seated I replaced with known working memory and I got the same results I tried the different memory modules and got the same results I even changed out the video card but still same results continuous beep So after boring you with my story would anyone know what else that could be going on with this badboy I feel I have run into a brick wall I can't figure out why the hardware keeps taking the plunge Any ideas

A:Bios Beep Errors

If it took a power surge and fried components - I would now start suspecting the power suppply. No voltage or bad voltage to memory may mislead the logic to think it is bad memory.

http://www.techsupportforum.com/forums/f10/bios-beep-errors-41905.html
Relevancy 53.75%

Hi, my name is Delinda and I am new to this website. I am trying to fix a friend's computer problem and I need some help. The computer is an HP with an AMD processor. No I do not know the model type nor do I know which AMD processor it has nor do I know which Bios is has. I do know the the system is approximately 1 1/2 to 2 years old.When powering up it beeps once then it keeps repeating long beep, short beep. Or it could be a short beep then a long beep. The only info I have found is that it might be the system board. I NEED HELP IN UNDERSTANDING THE BIOS BEEP CODES.Thanks,Delinda

A:Bios Beep Codes

Worth a look, http://h10025.www1.hp.com/ewfrf/wc/documen...ocname=bph07107.Louis

http://www.bleepingcomputer.com/forums/t/317433/bios-beep-codes/
Relevancy 53.75%

I assembled a new system as follows Mobo ASUS P KPL-CM Intel Core Quad Q OCZ DDR - GB Kit Seagate Barracuda TB MB Cache RPM MadDog DVDRW drive W PSU This system when assembled went through POST but kept crashing on Vista or WinXP installation After several tries of troubleshooting I finally figured out that one of the GB RAM sticks was bad So I kept the good stick no no beep, bios No video, of RAM in and went ahead and installed VISTA and all Everything was great No video, no beep, no bios Now all I needed to do was go back and exchange the RAM I exchanged the RAM for Corsair XMS DDR - Then I reassembled the system as follows Mobo ASUS P KPL-CM Intel Core Quad Q Corsair XMS DDR- GB Kit Seagate Barracuda No video, no beep, no bios TB MB Cache RPM MadDog DVDRW drive W PSU This time after assembly I get NO VIDEO signal No POST No BIOS No beeps either No light on keyboard too HDD light is always on Power LED is on The motherboard LED is on CPU Fans spin DVDRW drive works i e tray opens closes I can even hear the hard drive spinning and all So I first disconnected the HDD and the DVD RW Still same problem Removed one RAM stick Same problem Removed the other RAM No video, no beep, no bios stick put the first one back on Same problem Switched RAM slots Same problem Removed BOTH RAM sticks Same problem Finally just had the CPU and heatsink fan on there but still same problem Frustated I went and exchanged the mobo Got a Gigabyte GA-G M-ES L Now rebuilt the system as follows Mobo Gigabyte GA-G M-ES L Intel Core Quad Q Corsair XMS DDR- GB Kit Seagate Barracuda TB MB Cache RPM MadDog DVDRW drive W PSU After assembly I still have the SAME FRIGGIN problem No video No beeps No POST No BIOS No light on keyboard too HDD light is always on Power LED is on CPU Fans spin DVDRW drive works i e tray opens closes I can even hear the hard drive spinning and all I tried the same routine disconnected the HDD and the DVD RW Still same problem Removed one RAM stick Same problem Removed the other RAM stick put the first one back on Same problem Switched RAM slots Same problem Removed BOTH RAM sticks Same problem Finally just had the CPU and heatsink fan on there but still same problem CAN SOMEONE PLEASE HELP ME BEFORE I GO NUTS HERE The motherboard should be good because its a new one The other problem may be the CPU but it worked once to a point where I was able to install Vista and work it fine Again please help Thanks in advance - SM nbsp

Relevancy 53.75%

I am really flustered The other day mouse and keyboard got disconnected. Reconnected and restart comp. Nothing boots to a Intel screen no beeps, fans and lights all working. Tried different hd same checked all connections, changes hd cable. now ready to beat comp. :unch: I don't want to randomly start replacing. Anyone every run across this situation? Could you plz point me in the right direction.
 

A:No Bios Post Beep

You probably toasted the motherboard. Nice pink font... You must be a nice woman
 

http://www.techspot.com/community/topics/no-bios-post-beep.67346/
Relevancy 53.75%

Hi Guys,

At start up this morning on my Laptop (VGN-NR360D), twice, I got constant beep... sort of 1-1-1-1-1-1. This was right at pressing the power button before the bios screen came up.
The Third time it went into windows...

the bios is a Phonix bios. I m trying to find some info on the error codes but the constant 1-1-1-1-1-1-1 beep seem to have diverging views on what exactly could mean.

Any thoughs appreciated

A:Start Up Bios Beep

Two sites for beep codes, but I couldn't find one definitively for Sony Vaio...

Beep codes Definition from PC Magazine Encyclopedia

Computer Post / Beep codes

http://www.sevenforums.com/hardware-devices/113442-start-up-bios-beep.html
Relevancy 53.75%

I recent flash my BIOS from a F to a F from gigabyte bios update page now when i start my compterm i get a ONE beep when it pass post BIOS before window what one BIOS at startup beep does one beep mean i one beep at BIOS startup never got any beep with F but now i get one with F what does it mean also and i do not know id it one beep at BIOS startup has any thing to do with this or not but my compter some thime re boot sudden now since i flash bios update below is my info from my compter Program eSupport com BIOS Agent Version BIOS Date BIOS Type American Megatrends BIOS ID - - - - -KT A-GA VTXHP OEM Sign-On VTXH F Chipset VIA C rev Superio ITE SiS rev found one beep at BIOS startup at port Eh OS WinXP SP CPU AMD Duron tm Processor Mhz MAX Mhz BIOS ROM In Socket Yes BIOS ROM Size K Memory Installed MB Memory Maximum MB Memory Slot MB Memory Slot MB Memory Slot MB ACPI Revision nbsp

A:one beep at BIOS startup

One beep is good (Is with 99.999999999~ % of boards at least)

The reboots may be that you need to update the drivers too, especially with a new BIOS depending on exactly what the BIOS flash fixed.
 

https://forums.techguy.org/threads/one-beep-at-bios-startup.545862/
Relevancy 53.75%

i was wondering what was wrong with the motherboard if there is no beep at all? i tried 2 motherboards and it happens with both, could it be my processor?
 

Relevancy 53.75%

Ok my BIOS beeps sometimes. Only when I run things that take a lot of memory though, like graphic-intensive video games, so I think it's a lack of RAM. I'm running Vista Business on only 1GB RAM (PC3200 DDR), so I think that may be the problem since it only beeps when I'm playing a game.

I have to wait until I get paid again to buy more memory, so in the meantime, how can I stop this beeping? I couldn't find it in the BIOS setup. I have a MSI K7N2 motherboard.
 

A:Strange bios beep

Increase the virtual memory... How full are the hard drives? Control Panel, System, Advanced...
 

http://www.techspot.com/community/topics/strange-bios-beep.107254/
Relevancy 53.75%

hello, I just got this laptop, and enabled boot password. I hate how it keeps making this loud beep whenever it boots. Why is it on by default and no option to change in BIOS setup. Please help, thanks.

http://h30434.www3.hp.com/t5/Desktop-Boot-and-Lockup/bios-password-beep-HP-450-G3/td-p/5662508
Relevancy 53.32%

My dell laptop inspiron 5520 have problem with keyboard . Some of keys like function keys , enter , cntrl , arrow keys and some alphabet are not working plz help me with that. And also 5 days before when I am trying to start it some beep sound where coming from my laptop so I immediately power it off and again start it and it worked properly. But some days before it happen again three times what should I do with it
Plz help me as early as possible.

A:Keyboard issue and beep sound

I'm assuming windows 7 is on the system ? 
First, I'd suggest you run diagnostic tool on the system. It will scan for any possible hardware issues that might be causing problems for the keyboard
1. Power off system
2. Power on system, quickly start tapping F12 key continuously. You should be in the diagnostic screen. After the quick tests, run full tests as well. Please report back any error codes.
https://youtu.be/WDpvQ3qwy1c

http://en.community.dell.com/support-forums/laptop/f/3518/t/19991812
Relevancy 52.89%

Hi crew, i recently updated BIOS on one 280 G1 prodesk ( Firmware ). After successfully update undre Windows and reboot computer beeps eight times with power button flashing same time. Eight beeps are two times repeat, then only cpu fan running. Service guide http://h10032.www1.hp.com/ctg/Manual/c04887155 describes only seven beeps :-( Any suggestion? Bios recovery mode? I am currently out of warranty :-( Thank you!

http://h30434.www3.hp.com/t5/Desktop-Boot-and-Lockup/HP-280-G1-Beep-eight-times-after-BIOS-update/td-p/5735430
Relevancy 52.89%

Hi nbsp Status I have HP Bios Sound/beep 840 Laptop G3 EliteBook G Laptops to prepare for mass deployment nbsp nbsp Info Current system BIOS Version is N Ver nbsp Scenario I need to enter the BIOS to enable Password set up enable TPM input Ownership Tag input Asset tracking number nbsp Problem Everytime I perform the above tasks nbsp e g set up password it beeps at me when I confirm password it beeps at me nbsp When I save changes it beeps at me when I enter the input fields for asset tracking Number and Ownership Tags IT BEEPS AT ME Even saving new changes in BIOS it beeps at me The previous line of ellitebooks G G never use to do this I find its the same the new Elite G Towers nbsp Question Is there a way to Disable this sound without disabling the Error code beeps or disabling this beep completely nbsp nbsp As you can imagine my desktop workstation is right next to the Operations and Project managment team nbsp nbsp So before nbsp having to relocate my Build desk can we disable 840 G3 Laptop Bios Sound/beep this annoying sound nbsp nbsp thanks nbsp nbsp nbsp nbsp

http://h30434.www3.hp.com/t5/Notebook-Audio/840-G3-Laptop-Bios-Sound-beep/td-p/5746928
Relevancy 52.89%

I just bought the following components brand new ASUS M N T-M V Socket AM a mATX Motherboard corsair ram power supply w amd phenom ii x and geforce gtx is a couple of months old On my old system I had the problem of not getting a display or a BIOS beep on startup So after looking online I narrowed it down to a faulty motherboard cpu or ram So I upgraded ALL of them I ve connected everything correctly and I am still not getting any display or a beep beep BIOS display or No startup on on startup My monitor works fine I ve tested it I ve tried the following solutions Reseated RAM and video card Reset CMOS battery Reset BIOS Connected my TV to mobo with VGA No BIOS beep or display on startup Connected my monitor to mobo with VGA Connected my monitor to card with DVI Connected my TV to card with HDMI Tried an old video card Tried no video card Tried different cables Nothing has worked so far and I m this close to setting some C charges inside and blowing it to hell Anybody got any ideas edit my RAM is Corsair XMS DDR GB My system powers up with fans spinning and lights on my motherboard I do not have a speaker plugged into the board nbsp

A:No BIOS beep or display on startup

Try a different PSU
 

https://forums.techguy.org/threads/no-bios-beep-or-display-on-startup.983130/
Relevancy 52.89%

Oh no...
A friends pc, with bios password. I've replaced the battery to get rid of the password. Pc gives one long and three short beeps while booting, and stops after that. I've checked the videocard - without success.
Who can help me out of this?
 

Relevancy 52.89%

Installed a new mobo:
Asus M3N-HT Deluxe

I know, I know...phoenix bios doesnt emit single beep codes....

took a look, did some searchin and i cant troubleshoot it, Im still gettin a single beep...
 

Relevancy 52.89%

Removed one of 4 memory modules, simms 72 pin to attempt to ID. It is compaq,?MB, reinstalled and now computer won't boot and bios is emitting long beeps. Removed cleaned memory contacts, same.
Pulled video card, cleaned contacts, same.
Attempt to ID mobo, found p/n MBPCI024ABWN, google says INTEL, no info on INTEL site.
Attemted ID at mobo.org no matches.
Gateway 2000
Socket 8 Intel pentium pro SL247
 

A:{RESOLVED}Continues bios beep

have you tried just two of the memory chips
make sure all cables are fitted right you may have bumped something

it sounds like memory problem though
 

https://forums.techguy.org/threads/resolved-continues-bios-beep.63051/
Relevancy 52.89%

AIO 300 20ISH With no OS at the moment, trying to get into BIOS but pressing F12 or F1 makes a long beep.Any advice?

https://forums.lenovo.com/t5/Lenovo-A-B-C-N-S-Flex-Horizon/300-20ISH-Long-beep-when-trying-to-get-into-BIOS/td-p/3357257
Relevancy 52.89%

I need some help!! My pc will power up but will not POST. The fan comes on and then I get a long beep (4 sec) followed by a pause (2 sec) then it repeats that continously and nothing appears on the monitor. This problem just started out of the blue - I was using a program (MediaShout) and the program froze up - so when I rebooted - this started. Nothing will display on the screen. I checked with Phoenix Bios - and there was no beep code that matched. Some other forums said it might be a memory error - I reseated the memory and still get the problem. HELP!!!

Here is what I have:

ABIT BD7II-RAID MOBO
PHOENIX D686 BIOS
PENT 4 CPU
DDR 266 RAM 512 MB (2)
STARLOGIC 300W POWER SUPPLY
VISIONTEK NV996.0 VIDEO CARD
MAXTOR D740X-6L HARD DRIVE
 

Relevancy 52.89%

Can a mod please explain why all my posts complaining about the fact that Toshiba can't fix the well-known Click Mini keyboard battery problem have been removed?

Caveat emptor, it would appear that not only does the product not work as advertised but all attempts to engage to get this fixed and to alert the community seem to be censored, too...

A:Satellite Click Mini - BIOS and keyboard battery problem

Please try this (worked for me)

Turn off laptop fully by holding down the power button

Place it in charger.

test to see whether or not it is fully turned off by quickly tapping the power button once. You should see two battery indicators.

Wait until the top one has charged..

When you see that the charge indicator is on the second battery, this will unfortunately not charge it... however..

tap the power button quickly to see the two indicators.

Quickly remove the charger plug from the laptop (not from the wall) and reinsert it back

Then wait...

After 20 minutes feel the charger on the wall.. if it is warm, then it is charging the keyboard battery...

Use Bios 1.7 or 5 before doing this (I tried it on bios 5)

https://forum.toshiba.eu/showthread.php?86267-Satellite-Click-Mini-BIOS-and-keyboard-battery-problem
Relevancy 52.89%

OK so I have another post on here about a Hard Drive problem with display No beep Bootup No Mouse No keyboard One No my new rig Part of the reason for building it was that my old one has had booting issues for like months It would run fine while booted up but on a restart I had to consistently turn it off and on anywhere from - times in order to get a display and for the PC to boot Well I tried shutting it down so that I could try to test my problematic HD from my new rig well now I cannot get it to boot I tried my method of powering up and down slowly but consistently until it booted but now it wont boot I get one beep when it starts the fans spin the burner powers up the HD light goes solid and does not go out but the display stays OFF and neither the keyboard nor the mouse power up I tried checking my two GB RAM sticks and even tried taking both out and using a good one from my roommates comp but it No Bootup One beep No display No keyboard No Mouse still didnt boot One funny note for a little while I wasnt even getting the one beep at the startup but I jiggled the video card with it powered down and now it beeps once on start but still exibits the same symptoms I also tried using my new PSU for my new rig and it didnt help I dont think its the video card at all because when it No Bootup One beep No display No keyboard No Mouse would boot the video keyboard mouse would all power on together and when it doesnt none of them do I am thinking board right now and I am prepared to order a new one Secondary question if I get the new board I found one with the same specs almost exact to my board but it is different Will that mean I will need to format and install Windows again i assume so there is no way to just boot up the same again right nbsp

Relevancy 52.89%

Just looking for some Medal beep of Honor/Keyboard makes help on my gaming problems I play medal of honor all of the expansions but my problem is I just got a new computer A gateway with windows xp gig of ram gb hd pentium Ghz but my gameplay is different Medal of Honor/Keyboard makes beep In the game you can lean left or right strafe left or right and move forward and backworks Well say I lean left move to the left and walk forward at the same time that would move me in a diaganal motion Well on my new computer I hold those keys down and my keyboard beeps It is sort of sluggish to my moves Medal of Honor/Keyboard makes beep I cant run to the left and lean and jump Its like the keyboard can only handle so much As you can imagine this effects my gaming because I have to change my whole way of playing Its almost to the point where I wont play the game anymore because I can t play to the games full offerings If anyone could help I would really appriciate it Thanks Joe nbsp

A:Medal of Honor/Keyboard makes beep

I;ve always been limited in my keymoves in MOH (get the beeps.... in all things actually)

On a side note, I've never seen anyone move diaganal in game........ try a few binds.
 

https://forums.techguy.org/threads/medal-of-honor-keyboard-makes-beep.348111/
Relevancy 52.89%

Hi I have a computer that was working perfectly and after using compressed air it won t give a signal to the monitor the keyboard doesn t light beep monitor signal, startup on or no keyboard No up I m assuming no power to the mouse No monitor or keyboard signal, no beep on startup either and there is no beep when I start it No monitor or keyboard signal, no beep on startup Internet cable lights up when I connect it and the speakers make a quot pop quot noise like its receiving signal fromt the sound card I tested the monitor RAM and graphics card on another computer and they seem fine Fans are running okay and I removed the little circular battery from the mother board for half an hour to drain it but still nothing Does this sound like a motherboard problem I have a K N platinum and if you suggest it is this can you recommend a new motherboard as this doesn t seem to be easy to come by anymore Hopefully its not the hard drive Thank you for checking this one out and PS - baby steps are appreciated nbsp

A:No monitor or keyboard signal, no beep on startup

Compressed air, not treated by difluoroethane gas or other static electricity preventative, is a very dangerous destroyer of computers... We have seen at least 12 computers destroyed by Compressed Air... one I did myself in my learning days...
Since then, we have run a lot of tests with canned air... All that are not treated are dangerous. All that come from a bench tank are just about guaranteed to destroy a computer system board, CPU, or other critical components...
And the static electricity can flow through several components before it finds a way to ground.
 

http://www.techspot.com/community/topics/no-monitor-or-keyboard-signal-no-beep-on-startup.148045/
Relevancy 52.89%

Today after cleaning my keyboard with a liquid cleaner, it stopped working.PC case is giving a beep sound.It is a samsung Multimedia keyboard.I dont know the model number.Please help me as soon as possible.

Thanks
 

A:Keyboard not working.Beep sound by CPU case.

Computers and liquid cleaners dont go together very well... Try to replace the keyboard and restart.

We will need to know the model number for your computer and your PCs beep sequence. ie, does it beep once? twice? et al...
 

https://forums.techguy.org/threads/keyboard-not-working-beep-sound-by-cpu-case.717379/
Relevancy 52.89%

Hi there , when i playing games like dota sometimes my computer beeps once and cause my keyboard and mouse to stuck so im forced to restart my comp . Sometimes once beep then stuck keyboard and mouse but after a few seconds the keyboard and mouse will work again without restarting my comp . Any idea ?

Relevancy 52.46%

I have a computer running vista, i get a single bios beep then a line at the bottom of the screen with a light running across it, unable to progress further, any ideas please.

A:single bios beep unable to boot

Hi and welcome to TSF do you have a install or recovery disc from which you can attempt to repair your system

http://www.techsupportforum.com/forums/f217/single-bios-beep-unable-to-boot-693809.html
Relevancy 52.46%

Hey folks Not sure if this is a hardware or software issue but here s what happened Whilst browsing my PC froze with the to zig load beep) BIOS zag on & screen Froze won't now (no screen changing Froze on zig zag screen & now won't load to BIOS (no beep) to a strange pixelated zig zag pattern Upon hitting the reset button my computer now will not load to BIOS with no beep- it just stays powered on with a black screen The LED still functions and I can open the CD drive amp close it Upon doing a bit of research it sounds like it could be a video card problem Although the fact that it randomly happened whilst browsing and that I no longer get a beep on start up makes me think it could be a virus although Avast was running at the time Any help as to how to fix greatly appreciated Thanks System spec Windows XP Service Pack AMD Athlon X Dual Core MB RAM NVIDIA GeForce Barracuda Ultra ATA GB ASUS M NPV-VM Motherboard M-Audio Soundcard Avast Free Antivirus amp Malwarebytes nbsp

Relevancy 52.46%

Hi all. Went to boot up my Acer this evening to no avail. I can see it start to cycle through searching the DVD drive and see the read/right red LED light for the hard drive go on for about 5 seconds, then nothing. No BIOS test pass beep. I know that it beeps once for passing, then continues to boot. I hear the fans going. but that's it.

I took the side panel off and reseated all the connections including the Mem strips. At one time I left a strip out intentionally for a continuous beep, which is what it's suppose to do.

It was running great earlier today. Shut it down with the physical power button as I always do.

I'm searching the Inet to no avail. Any thoughts?

A:Acer > no BIOS pass test beep

Nothing on the monitor? No BIOS POST screen?
Here is what I normally do in a situation like this.
Unplug anything not needed for the PC to POST, all you need is the bare minimum.
Power supply, motherboard, CPU with heat sink, one stick of RAM, Video card (onboard if it has it), Monitor and keyboard.
If it will now POST add parts back in one at a time until it quits again. If it won't POST start swapping parts. I'd try a spare power supply first. Then Video Card, and RAM etc.

http://www.eightforums.com/drivers-hardware/35281-acer-no-bios-pass-test-beep.html
Relevancy 52.46%

Hi I have a ASUS CUSL -C Jumper Free PC AGP x Motherboard We correctly flashed and up graded the Bios to teh latest version and it was working fine Then another day I turned on the Computer and got start up beep codes Three beeps then a very short pause the the other two beeps the th and th were a high not beep in Manual is Bios that code listed the low beep I looked at the manual on page and there is Bios beep code that is not listed in the Manual no reference to these codes The closest that I could come to it was Bios beep code that is not listed in the Manual teh posibility of it being a video card I bought another one - put it in and apparently it was not the video card Oh well - I guess it is going off to the repair shop Taking it back to where I had it built I checked everything to see it things were tight and in place I am not good at this sort of thing I had teh computer built years ago so I guess I got plenty of miles out of it nbsp

Relevancy 52.46%

Hi guys i was trying to surf the net about mins ago on my computer when all of a sudden the power just turned right off i initially thought black out but none of the other computers crashed And then my computer tried to restart and it seemed like the power kept on cutting on and off so i turned the PSU off at the back waited turned back on and restarted and i just get the continuous beeps and the screen flashes a message saying i havent plugged in the power on my AGP But there is lights on the AGP bios crash, beep Random continuous and everything else starts running The fan on the graphics card runs and everything I unplugged every cable from the PSU and reconnected the AGP is still snug in its slot Computer is about - months old all parts purchased separately and i installed there has not been any problems until now Antec sonata smartpower PSU W which has only PCIe power cable Gigabyte GA- P-DS mobo Gecube XTXD-VIE mb radeon PCIe Intel Core DUO E GHz MHz FSB MB L cache GB Western Digital HDD SATA rpm GB GSkill x GB DDR - - - F - PHU - GBHZ Benq inch monitor Samsung xDVD DL oem Optical drive Nortons Internet Secruity updated when it booted bout mins before the crash Any more info you Random crash, bios continuous beep want i am more than willing to provide Thank you in advanced Tom nbsp

Relevancy 52.46%

When i turn on my computer i heard no post beep and i got just a balck screen. I took out the memory no beep. I disconnected all the power connector except the one to power the mobo and no beep either. Any other suggestions or what you think is the promblem? thankz
 

A:No post beep and no bios just a black screen

"Sounds like a dead BIOS chip..." From the limited description... Power supply or motherboard may be bad. Bios chips fail more from bad attemps of updating or flashing rather than out-of-the-blue
 

http://www.techspot.com/community/topics/no-post-beep-and-no-bios-just-a-black-screen.102399/
Relevancy 52.46%

I have a computer that I am putting together and when I put in one power supply the cpu fan turns on by itself but no bios beep and no display on the monitor, when i put another power supply in and push the power button nothing happens, the power switch cable is in the right spot. I have the motherboard out of the case with just the cpu/ram/power supply hooked up to it, the mobo is lying on the static sheet so there is no possibility of it grounding out. I dont know what the hell is wrong. The mobo is a chaintech 7KJD, does anyone know if there is a special jumper that is protecting the CMOS that I am not seeing?
 

A:NO BIOS beep, computer wont boot

Firsly, "static sheets" can be very conductive. Thats how they equalise/dissipate static.

They are NOT an insulator in many cases!
 

https://forums.techguy.org/threads/no-bios-beep-computer-wont-boot.235842/
Relevancy 52.46%

Ok so ive been here several times over the past or so years with this same issue and every time I think I have it solved but to no avail here is the issue my computer was working long bios) short? 2 beep 1 (award fine one night and in the morning it wouldnt start I click the power button and everthing sounds fine until Its suppost to give a single beep but 1 long beep 2 short? (award bios) insted it gives me long and short beeps I have an Award bios and when I went to check out what this means it says it quot Indicates a video error has occurred and the BIOS cannot initialize the video screen to display any additional information quot so im not sure what this means other than the video card is bad the video card is pretty new and before I go any further i guess I should say that the last time this happend I fixed it by resetting my cpu and before you say it yes I have already tried this nbsp

A:1 long beep 2 short? (award bios)

hmm

Sounds like the video card bit the bullet :dead:
 

http://www.techspot.com/community/topics/1-long-beep-2-short-award-bios.99547/
Relevancy 52.03%

PLEASE CAN YOU SUPPLY CORRECT BIOS BEEP CODES FOR P6 2260EA

A:PLEASE CAN YOU SUPPLY CORRECT BIOS BEEP CODES FOR P6 2260EA

Which BIOS does your desktop PC have?

http://h30434.www3.hp.com/t5/Desktop-Boot-and-Lockup/PLEASE-CAN-YOU-SUPPLY-CORRECT-BIOS-BEEP-CODES-FOR-P6-2260EA/td-p/5783560
Relevancy 52.03%

Hi!
I took a video of the symptoms.
I have replaced the CMOS battery and reseated the RAM module and HDD. What next should I do?
Thanks!

A:Vostro 3560 not booting, no bios screen, beep every 3 sec,

Hi AMITWO,
The link you have provided has an error. 
Kindly upload the video on YouTube and provide a link if required.
What is the exact # of beeps in a cycle? This will help isolate the source of the issue.
If it is 1 beep - the motherboard is at fault and needs to be replaced.
If the system is under warranty, Please click my DELL-username and write me a private conversation with the service tag and your contact details(Name, Phone#, Address and Email). If there is no warranty, then you could contact our team to get a quote for a paid service call - http://dell.to/1vnT6CQ
Let us know if you have any other queries.

http://en.community.dell.com/support-forums/laptop/f/3518/t/19993556
Relevancy 52.03%

switch the power on and nothing happens except for a continuous beeping. any ideas?
OPERATING SYSTEM: Windows 98 Second Edition (H3660) [WIN98SE]

MOTHERBOARD: RM Aopen MX36LE MicroATX VIA Apollo PLE133 Chipset [MX36LE]

CPU: Celeron 800MHz KNI (100MHz Front Side Bus)

RAM: 64MB (SDRAM) (upgraded to 256mb)

VIDEO: VGA Integrated Via VT8601 [_ATRI2D]
SOUND: Integrated AC97 Audio (AD1885 CODEC) [0AVIAC97]
 

Relevancy 52.03%

Good day wonderful tech people code possible memory beep - BIOS Dell failure? I ve been using my Dell Vostro for about three years now and besides a few repairs here and there have had Dell BIOS beep code - possible memory failure? a generally positive experience Unfortunately after watching a little Firefly last night and shutting down my laptop for the evening I awoke this morning to be greeted by a blank screen and a BIOS beep code long short means that there has been some sort of memory error according to the manual I have two sticks of the memory that came with the laptop - GB Hynix HYMP S CP - Y and I tried all of the permutations of reseating removing them The idea that two sticks would fail at the same time seems not very probable Which brings us to a painful possibility and what I want to ask y all about I know this model of Dell along with a few others is slightly infamous for a faulty Nvidia GPU Do you think that might be cause of this problem Between the screen that refuses to display anything and the memory sticks that seem just fine I m getting worried Since this is past the warranty I bought it from Newegg three years ago would it mean a motherboard replacement As a DIY kinda person would it be feasible for me to order a motherboard and replace it myself Thank y all kindly nbsp

A:Dell BIOS beep code - possible memory failure?

Hate to do this, but bump?

Am I in the wrong place? Anybody care to help direct me to the right place? Thankee kindly,

Pation
 

https://forums.techguy.org/threads/dell-bios-beep-code-possible-memory-failure.1007496/
Relevancy 52.03%

HI guys Before hand thanks for help and point me into to right direction New bios screen- BEEP Solved: post-No BIG Motherboard-No and apologize of English not my first language Ok here is my situation now I installed New motherboard with new processor and new power source new memory ram but with the same video card and same sound card Power Source Enermax server EPS V Solved: New Motherboard-No post-No bios screen- BIG BEEP w Model Mobo Gigabyte GA-EP -UDS L Processor Intel CORE DUO GHz socket LGA E cache MB lt ----updated type name missed before sorry Memory Ram Corsair GB DDR twin X Solved: New Motherboard-No post-No bios screen- BIG BEEP - C G Sound Card Diamond Xtreme sound Video Card Nvidia GT The H D Checked to have connection to power - No New has Windows XP x bit installed gb Checked to power connection - Floppy drive the same as well no new quot oldie quot But we got black screen in the monitor and a quot Big Long constant Beep quot the computer turns on the fans are on we unplugged immediately and turn off the power source This is my check list of Install We have the same HD and is the no slave I check that the ATX v is connected properly to the board and power source I check that the ATX is connected and seated properly I check all connections of H D Floppy and DVD Rom are seated and connected properly I check memory ram seated properly I check video card seated properly I check SATA seated and connected properly IDE seated and connected properly Floppy FDD connected properly and plug to power H D connected to board and connected to power with no linking Processor fan power connected to board ---------------------------------------------------------------------------- Things that I m not sure I got in the right place But seems by the book of Motherboard that are in correctly place F Panel Header connectors are in the correspondent plugs those lil black thingis are a pain to put in and the F USB F and USB Headers connectors I plug all lil black pins connectors into USB following the book but still I dono if they supposed to go like that or if I plug something Wrong pls help We got Sooo scared with the Big long beep Toti UPDATE I been checking in the forums for the Beep codes to see if I can understand why is doing that Long beep but i haven t find the beep code for my situation when I turn on the computer I got no screen in my LCD and I get a Loud long constant Beep It s not a intermittent long beep or or one long No it s a constant loud beep Toti nbsp

Relevancy 52.03%

A couple of weeks ago the fan on my graphics card stopped working it was buzzing a lot and periodically slowing down I bought a new heatsink for the card an Arctic Cooling Accelero L I installed everything on the card correctly and carefully Now when I put the graphics card back on the mobo no PC monitor but posts, beep, signal and GPU BIOS on red light LED the red light the one ON the actual card not on the mobo is lit up and my monitor stays black The GPU itself worked perfectly fine even if the fan wasn't working before I installed this new cooler I wouldn't use it much while the fan was breaking down so that it wouldn't overheat There IS a POST beep on power-up Just a normal single beep It recognizes there is a graphics card in my PCI-E slot but the card itself has a red light on it now I tried swapping different SATA cables even tried connecting the card to a molex instead It just won't respond The fan on the new heatsink spins fine however I have the BIOS beep, PC posts, but red LED light on GPU and no monitor signal fan connected only to molex power it comes with a molex cable for direct-to-PSU use in case the fan connector doesn't fit the header which in this case it definitely wouldn't I don't know whether or not that's an issue Now prior to all of this happening I had just contracted the Trojan virus Sirefef ZeroAccess I don't know if that would affect graphics card power settings GPU Sapphire ATI Radeon HD PCI-E

A:BIOS beep, PC posts, but red LED light on GPU and no monitor signal

Think you answered your own question,






Quote:
The fan on the new heatsink spins fine, however I have the fan connected only to molex power (it comes with a molex cable for direct-to-PSU use in case the fan connector doesn't fit the header, which in this case, it definitely wouldn't). I don't know whether or not that's an issue.


Pretty sure the card won't initialize if there isn't a fan connected to the fan header. Are you sure that the connector from the fan won't fit on the card? From what I can see it has either a 3 or 4 pin connector (or both depending on which model it is) that should fit on the fan header on the card.

http://www.sevenforums.com/hardware-devices/243225-bios-beep-pc-posts-but-red-led-light-gpu-no-monitor-signal.html
Relevancy 51.6%

hello.. i'm new here... and i need some help... my computer is AMD Athlon 850Mhz... i'm using genious keyboard and a4tech mouse... 3 days ago, we decided to replace both since they are old enough to retire... so we bought a brand new generic keyboard and generic optical mouse, but after installing these devices during startup (counting and detecting devices) i'm hearing a continuous beep sound and it will stop when entering windows xp but i keyboard and mouse are not functional... please help!
 

https://forums.techguy.org/threads/continuous-beep-after-installing-new-generic-keyboard-and-optical-mouse.737129/
Relevancy 51.17%

I ve had a s for almost year and it s been fine Was initially a Vista box which I upgraded to W Ultimate weeks ago the fan started running ALL THE TIME and I goggled around to see what might be wrong Several people had a similar problem and a BIOS upgrade seemed to help So without reading things too carefully I flashed the BIOS to the latest one After the flash a screen message in windows said all was fine and a reboot was required Upon the attempted reboot I get short beep a lot of fan noise and no display I did have an upgraded video card in the s and was running a DVI - VGA to a quot Plasma screen Here s what I have tried Booting from W CD DVD and beep 1 display BIOS in Flash on no 530S Results boot Booting from Norton Ghost 530S BIOS Flash Results in 1 beep on boot and no display recovery disk Hooking up the PC to a dvi monitor 530S BIOS Flash Results in 1 beep on boot and no display Hooking up from the on board VGA video card to the plasma None of those things worked still getting the beep and no display Bought a used Dell motherboard on ebay and replaced it same problem exactly when running to the plasma via both DVI and VGA from the PC For fun I pulled the video card and ran to the plasma via the on board VGA port no change I m about to give up since I can t get a display Does anyone have any good ideas i can try before I junk the PC BTW here s the board I bought http cgi ebay com ws eBayISAPI dl D amp viewitem amp sspagename ADME B EOIBSA US nbsp

Relevancy 51.17%

Hey guys I ve recently ordered a new computer from eBuyer co uk and spent the duration of today - components BIOS New PC Beep, signal Built work, monitors. NO All to no with a very well experienced friend building it up from scratch The parts we have and that have been built together are the following PSU Arctic Power W PSU With PCI-E New PC Built - All components work, NO BIOS Beep, no signal to monitors. x SATA Mobo ASUS M N PRO GeForce Socket AM CPU AMD Phenom X GHz Socket AM Memory x GB Corsair DDR PC RAM HDD x GB Maxtor SATAII rpm Internal GFX XFX GS MB DDR XXX Edition MHz As I said the friend of mine who built the system up for me is very experienced- he s built PC systems up countless times in the past and has a brief idea of what the problem could be here When all put together we plugged the power cable and monitor cable into the back and attempted to see if everything worked as normal The Motherboard light came on all fans were spinning and there were no error bleeps from the BIOS The problem however was that the monitor was not displaying anything at all- despite the PC seeming like it was running flawlessly We tried a number of different potential solutions First we swapped the cable for a different one but no luck We removed the graphics card and plugged the cable in via the on-board graphics but still no luck We ve even tried plugging it in to another monitor but the same problem still occurs This has been very frustrating- as everything SEEMS as if it s working fine Then it struck us the BIOS hadn t made a single beep at all since we d first put the power in Obviously with no keyboard or monitor connected to the system the BIOS should beep to indicate this- however it had done nothing Perhaps my motherboard BIOS is problematic We hadn t opened the Motherboard until today it was handled with extreme care and we made sure to be earthed and things to drain all static before handling it I myself haven t mis-handled the box while the motherboard was inside- we really do not know what has caused this problem If anyone has ANY ideas what the problem could be and how to fix it help would be very much appreciated I m at University and I really need this system up and running to work on ASAP We ve thought about installing my friends floppy disk drive and flashing the BIOS that way to try and give it a jump start but I myself have no idea if this will work or not Thanks again - Lee nbsp

A:New PC Built - All components work, NO BIOS Beep, no signal to monitors.

https://forums.techguy.org/threads/new-pc-built-all-components-work-no-bios-beep-no-signal-to-monitors.799224/
Relevancy 51.17%

I have tried to boot without the ram i get a series of beeps ,The screen is blank ,i tried shining a bright torch at the screen to see if i can see the bios page but nothing.

A:satellite L850D wont boot to bios,no start beep.

You can't boot to BIOS without RAM.

http://www.sevenforums.com/installation-setup/319720-satellite-l850d-wont-boot-bios-no-start-beep.html
Relevancy 51.17%

Need help here I have already read through several other threads of people with the same problem though none of them seem to have exactly the same symptoms The threads I read are here http www techspot com vb all wind -wont-boot--No-BIOS-beep-or-video-signal html http forums anandtech com messageview cfm catid amp threadid My Problem I am building a or Asus Deluxe post bios beep mobo won't P5LD2 new computer Basic components are Asus P LD Deluxe Motherboard Intel Pentium D Processor GHz LGA Pkg x L Cache UP only DDR g RAM ATI Radeon X Asus P5LD2 Deluxe mobo won't post or bios beep Pro Just like the other people in those threads I can turn on the power to my computer all the interior fans come on the LED on the motherboard is glowing green seems to be power everywhere there needs to be Except the computer won t post The monitor stays black and there are no bios beeps I can t Asus P5LD2 Deluxe mobo won't post or bios beep tell if the computer is loading anything or not It just sits there like a giant rock I can turn the power on and off with the main tower switch though the reset doesn t seem to be doing anything I figure that s nothing to worry about since if the computer isn t posting anything there is nothing to interupt My problem seems to differ slightly from the other people in that just to make sure my speakers were working I took the RAM out and rebooted Except I still didn t get any bios beeps telling me there was a hardward problem That leads me to suspect there is a problem with the motherboard though with so many people experiencing the same problem even with replacement motherboards I am hesitant to conclude that One other abnormality in this installation on the Radeon Graphics Card box one of the requirements was an additional interior power supply Except once I had the card in my hands there is absolutely no place on the card in which a power cord can be plugged into The manual was made for about different ATI cards and only says If your card requires additional power plug a cord into the power plug on the card Well that was really helpfull Thanks a lot ATI Anyway the fact that I didn t get a bios beep when there were no RAM sticks in any of the dimm slots has me worried I have checked all the wires plugging into the motherboard relating to sound on the hopes that one was installed upside down but no luck No matter how I have them plugged in I still get no bios beeps from the empty memory slots Anyone have any advice PS The CPU specs require Intel X Express chipsets and the specs on the motherboard are compliant with this possessing a P chipset Also the bios chip on the board seems to read as I believe it is commonly refered to though I may be wrong As far as I can tell from the other threads this should mean my motherboard has adequate bios for the situation Though this is a newer pentium with a larger cache I think and so perhaps that is the problem nbsp

A:Asus P5LD2 Deluxe mobo won't post or bios beep

I believe that the X1600 pro only needs the power connection for the AGP version. Yours is a PCIe-16x version so the power connection (I believe) is not needed. If it is needed, there would be a 4pin molex jack on the top right side of the card (opposite from the side that mounts to your case).

As for what bios supports your CPU, it depends on which revision your CPU is. Revision B1 is supported by bios version 0415 or newer. But revision C1 was not supported until bios version 0603.

I don't understand the bios number you have provided enough to tell if it means your board has been updated, perhaps someone else can help out with that (I am at work now). If your CPU is the C1 revision, then an out of date bios would explain things.

By the way, are you sure your board is not shorting out on the case? (You used the riser pins)?

Also, what make is your PSU and how many watts is it rated at?

What speed/make ram are you using?
 

http://www.techspot.com/community/topics/asus-p5ld2-deluxe-mobo-wont-post-or-bios-beep.58148/
Relevancy 51.17%

No BIOS or video with P LD Greetings I have just built a new PC see specs bellow and I am receiving neither a BIOS beep nor video signal MB ASUSTeK P LD CPU Intel-PentiumD LGA GHz BOX EM T RAM PIN DDR DDR PC - GB DDR HYNIX original two sticks for a total of GB VIDEO HIS HX PRQ - TOEN IceQII ATI x Pro MG HD Hitachi IBM HDT BIOS boot video ASUS won't signal beep No P5LD2 or + DLA SATA GB OD LG GSA- BB Multi DVD drive C PS Antec SONATA II with W Smart Power PS MISC MITSUMI FA T B inch card reader Here is what I have done - assembled the system both in and out of the case piece ASUS P5LD2 won't boot + No BIOS beep or video signal by piece - verified both the -pin ATX V and the EATXPWR -pin power connectors are firmly attached - confirmed jumpers are set to factory defaults - doubled checked that the RAM modules are inserted in the appropriate DIMM A and DIMM B slots -- though I have also tried every slot with one module and all two-module combinations - checked that the HD is connected to the SATA port - cleared the RTC RAM and - cleaned video card and RAM connectors with rubbing alcohol Here is what I have observed During both in- and out-of-case assemblies I was able to power up the system CPU fan case fan video card fan and motherboard but received neither BIOS beep nor video signal Only silence After trying multiple RAM configurations resetting the RTC RAM and cleaning components with rubbing alcohol I was greeted with the same familiar silence While conducting a piece by piece assembly the motherboard finally spoke three beeps -- what sounded like a long beep followed by two shorter beeps -- after powering up the motherboard and CPU without RAM I think it is important to point out here that this beep pattern does not appear to correspond to anything in the user s manual I then powered the motherboard CPU and RAM This time I heard or fast short beeps The third assembly included the motherboard CPU RAM and video card Silence No beeps I removed the video card and connected the HD Those or fast short beeps returned I added the DVD drive card reader and case light in succession and each time the beeps sounded off With the system percent complete I returned the video card to its PCI express slot and upon powering the system an all too familiar silence returned Consequently I noticed that when the video card is removed I am able to shut the system down normally by depressing the case power switch but when the card is installed I am unable to do so I have to reach behind the case and power down the system via the power supply s power switch Now I have corresponded with ASUS technical support staff and as of our last e-mail volley they are leaning towards either a defective motherboard or CPU They did recommend I try another video card but unfortunately my spare systems are a vintage AMD K and an Anthlon GHz neither compatible with this more modern technology Is it possible that the video card is deficient and the motherboard and CPU are viable I am not looking forward to building a whole new system just to troubleshoot this one Any insights you could offer would be most appreciated Thank you for the assistance nbsp

A:ASUS P5LD2 won't boot + No BIOS beep or video signal

Try different Video card.

OR

My experience

Ok i recently had the same problem with a new machine i built.

I realize that the CPU FAN was shorting the board.

I used a CPU with a fan controller it was shorting it some how. in the end i cut the wire from the Fan controllor(was like to wires together) so i just joined them then taped them up.

I would recommend testing a Different CPU fan,(i know it sounds weird but i was very suprised an noone ever came accross this i know off)

Also make sure. you have the board placed properly on the motherboard using spacers. about 0.5cm of the case using the spacers provided with the case.

I would also suggest that your CPU would be fine and properly anything else.

If your cpu dint work you would here the same beeps codes as if it was removed (are something along the line)
 

http://www.techspot.com/community/topics/asus-p5ld2-wont-boot-no-bios-beep-or-video-signal.35515/
Relevancy 50.74%

Hi all
i have a dell inspiron 1564 which i purchased about six months ago.Recently i installed ubuntu 10.10 along with my existing windows 7.But from yesterday i hear unusual beep sound at bios screen when i tried to shut down ubuntu and tried to log in to windows.I even tried uninstalling ubuntu and doing system restore but the noise still remains the same when i restart the system.Moreover what i notice is that the noise is not coming from the system.Could it be something related with virus or hardware?
 

A:Dell laptop making unusual beep sound at bios screen

any pattern to the noise
.Moreover what i notice is that the noise is not coming from the systemClick to expand...

what exactly do you mean by this
 

https://forums.techguy.org/threads/dell-laptop-making-unusual-beep-sound-at-bios-screen.959121/
Relevancy 50.31%

Hi Last night I turned off my computer and went to bed everything was normal Then I woke up this morning and tried to power it back on but it won t boot and this is all that happens The CPU fan comes on and stays on The hard drive light comes on immediately but then stays solid No BIOS nothing at all Just a blank screen The computer will stay like this for as long as it s powered no beep, bios, no boot, Solid drive odor weird light, no hard on Keyboard lights come on and stay on Checked all the motherboard connections hard drive connection everything is normal Computer gives off a weird odor now like the smell of permanent marker Computer stays in this idle state with the hard drive light solid until I get sick of looking at it and I turn it back off One thing---last night before I shut down the computer I disconnected Solid hard drive light, no beep, no bios, no boot, weird odor my mouse while still running the OS Windows XP I then shut down the computer without plugging it back in Solid hard drive light, no beep, no bios, no boot, weird odor and as luck would have it the mouse was taken from my desk and I don t know where it is How likely is it that this is the cause of the entire problem Because really I ve had similar experience like this before where the BIOS wouldn t even load just sat there at a black screen and a friend of mine said it was probably the BIOS itself or the hard drive but definitely something with the hardware itself Thoughts Everything is on that computer I don t know what I m going to do if the hard drive is shot I m desperate for help I ll try to do this accurately after reading the posting guidelines Operating system - Win XP Laptop or Desktop - Desktop If name brand - Brand and Model - Custom Type of Mouse USB PS Wireless - PS Type of Keyboard USB PS Wireless - PS Amount of memory - GB Motherboard model if known - PC CHIPS M G - SOCKET - FSB mhz - SIS GX CHIPSET - BIT SUPPORT Video card PCI PCI-E AGP or Integrated Video if known - Integrated Tried unplugging the hard drive and then switching on the power hard drive light still stays solid nothing appears on the screen still nbsp

Relevancy 49.45%

I have two printers connected to a Dell E520 through Vista. They are a Brother 5440CN and a HP 6110xi. The .Brother works ok but I can't say the same for the HP. Clicking any button on the HP gives the same response. Beep, beep, beep. I have recently moved the system to a new location just a couple of feet from where it was. Before the move Brother would scan and copy and the HP would do the same, but now as noted I can't get any response out of it but beep, beep, beep

Anybody have any ideas??.
 

A:HP 6110xi Printer Goes Beep, Beep, Beep

Here is the support and software site for the HP Officejet 6110xi All-In-One .

See if resetting the printer resolves the issue.

-----------------------------------------------------------
 

https://forums.techguy.org/threads/hp-6110xi-printer-goes-beep-beep-beep.1074388/
Relevancy 49.02%

Yes I still have an Inspiron after all these years nbsp Was working fine in daily use no recent hardware or software please Fans, BIOS anyone beep, - Blue No display No Disk advise? Inspiron 530 can whir, Solid Light, changes nbsp Upon shutdown a few days ago the display briefly showed a checkerboard before turning Inspiron 530 Solid Blue Light, Fans, Disk whir, No beep, No BIOS display - can anyone please advise? off and since then it won t boot I turn it on button goes amber then to solid blue immediately fans are all spinning yellow LED shines on motherboard and green LED on PSU lit HDD makes a Inspiron 530 Solid Blue Light, Fans, Disk whir, No beep, No BIOS display - can anyone please advise? few disk-like clicks but there is no single beep that it always used to make when turning on and screen stays black then shows quot No signal quot nbsp I ve tried switching from ATI Radeon HD via DVI to built-in VGA port and still nothing Screen is good tried with different computer power sockets and leads good switched I ve changed the motherboard CR battery for a fresh one removed unused cards modem card TV tuner card removed and replaced graphics card waggled memory cards nbsp No change in any case Spec is slightly upgraded from original but hasn t changed in months Original spec Core Quad Q GHz MB MHz FSB GB x x GB SATA RPM media card reader Vista DVD -RW DVD drives IEEE card Analogue Digital TV tuner PCIex Upgrades over a year ago Now GB RAM GB SSD with Windows and previous GB HDD moved to be D drive Upgrades a month ago Windows Any advice on what to test check would be greatly appreciated - thanks

A:Inspiron 530 Solid Blue Light, Fans, Disk whir, No beep, No BIOS display - can anyone please advise?

RB126
Those are excellent troubleshooting procedures you performed.
As there are no 'beeps', there could be a motherboard issue/failure.
Did you remove and replace the memory modules, to see if this made a difference?
No difference, try the following, if you are comfortable working around computers:
Note: The only 100% method of testing a PSU, is to install a known working power supply.Unplug the cord from the power supply, hold the power button in for about 15/20 seconds, open the case, unplug the 24-pin power connector from the motherboard and jump the Green wire to one of the Black wires, reconnect the power cord and power the system, if power supply, case fans and the hard drive run, then the PSU should be good.Note: Do not remove any wires from the plug, use a small piece of wire or a paper clip as a jumper.
Power supply checks out, again disconnect the power cord, hold the power button in again for 15/20 seconds to discharge the residue power, reconnect the 24-pin connector to the motherboard.Remove all PCI cards from the system, take out the video card [if applicable], disconnect all peripherals, except the monitor, mouse and keyboard and disconnect the power & data cables from all drives. Reconnect the power cord and power system on, see if you get a different LED indication on the power button, or 'Beeps'.No difference, remove the memory from the system and try again. Still shows no signs of life then you are looking at a motherboard replacement & maybe a processor. Note: The good news is, processors rarely fail, as the only method I know of checking a processor, is to install it a compatible working PC, or use a known working processor.Bev.

http://en.community.dell.com/support-forums/desktop/f/3514/t/19989266
Relevancy 48.59%

i was actually coming on here to ask about my new beep Solved: beep beep beep beep beep beep graphics card butttttt my laptop is acting up i have a toshiba satellite m d-s amd turion ultra x dual core mobile processor zm- mb mhz ram gb rpm hdd i shut it down properly upon finding that my C key was on the fritz a couple of months ago my E key had been doing the same randomly not working and randomly typing e consistently once i rebooted i got the message quot Operating System OS Not Found quot i let my computer rest for a while and turned it back on i currently get the toshiba startup but around when it s suppose to load the os it beeps continuously at the loudest Solved: beep beep beep beep beep beep beep volume with a contantly blinking underscore in white font on a Solved: beep beep beep beep beep beep beep black background i believe this may have happened once before but i have no clue what i did to fix it there are no extra items like CDs or disks in the laptop help nbsp

Relevancy 47.3%

hello everyone,
i had this problem last night i tried to uninstall program that i suspect as a virus and after that i wasnt able to turn on my computer, i heard 3 beeps, on the first place im able to go to safe mode by pressing the f8 but now im stuck with the 3 beeps constantly repeating the same thing, I dont know what to do , I need to do my homework pls help me. thank you

A:http://www.bleepingcomputer.com/forums/t/403177/weird-beep-beep-boop-noise/#ipbo

Hello, Welcome to BleepingComputer.I'm nasdaq and will be helping you.If you can please print this topic it will make it easier for you to follow the instructions and complete all of the necessary steps in the order listed.===The 3 Beeps are most likely coming from the BIOS and is an indication that your have some Hardware problem.Could be RAM or a failing Motherboard.Check it out.http://www.computerhope.com/beep.htmBringing you computer to a qualified technician is probably your best option.

http://www.bleepingcomputer.com/forums/t/608384/httpwwwbleepingcomputercomforumst403177weird-beep-beep-boop-noise-ipbo/
Relevancy 46.87%

My tower is not booting up when I turn it on.  My son took the side off and was going to put more memory in it for me, but in the end he didn't.  He put the old memory back in and put the side casing back on.  Today, when I turn it on, it has 1 short beep and 1 long beep.  It just won't boot up.  Can anyone tell me what I need to do to get it back up and running?











Solved!
View Solution.

A:one short beep and one 1 beep on hp pavilion media center 81...

RBurke, welcome to the forum. The BIOS Beep Code that you are hearing is caused by a memory problem.  Here is a guide that will help solve the problem: http://support.hp.com/us-en/document/bph07107 You should read the entire page.  The beep codes common to HP computers are toward the bottom of the page. Please click "Accept as Solution" if your problem is solved.

http://h30434.www3.hp.com/t5/Desktop-Software-and-How-To-Questions/one-short-beep-and-one-1-beep-on-hp-pavilion-media-center/td-p/2952007
Relevancy 46.87%

A few times now my E will give a low beep then a few seconds go by and another beep nbsp It just happened a minute ago - only two beeps this time nbsp But I think it happened a few days ago and beeped several times with the same pause of a few several seconds in between the beeps nbsp It s so quiet that before I ve thought I was imagining it nbsp But this time I was sitting in front of it typing There are no pop-up notifications on the screen anything is wrong such as Pause - Beep - Latitude Unexplained: Beep E5440 - the disconnection sound when you remove a portable HDD or your Wi-Fi disconnects nbsp Nothing to indicate what the beeps mean nbsp The laptop is working perfectly nbsp Battery is fully charged nbsp I can hear the fan turning and changing speed but it s am here with no outside noise and I can barely hear the fan nbsp I assume it would be spinning up like crazy if something were overheating I m at a loss what it means nbsp Does anyone know I m running Windows Pro -Bit if that matters

A:Latitude E5440 - Unexplained: Beep - Pause - Beep

Hi GEUNINEFAMILYMAN 
Thanks for writing to us. 
Is the system saving the date and time or does it goes back to any different date/time? 
Please update the BIOS from support.euro.dell.com--enter the tag#--submit--drivers and downloads--operating system--install the bios.
Do provide us your system tag#, email address and name via private message,by clicking on my name in blue and then select send a private message

Regards

http://en.community.dell.com/support-forums/laptop/f/3518/t/19986429
Relevancy 46.01%

Hi,

I am trying to help with a Dell Inspiron 5100.
The computer was running very slow and I've made a bit of progress resolving that. I think it needs some more RAM and I'm not sure if that could be at all related to the following.
The problem now is that after running for few hours, then shutting down, then trying to turn back on:
1. light comes on indicating computer is on
2. the computer makes 2 beeps
3. wait...black screen
4. wait...black screen
5. and so on

This does not happen everytime trying to start the computer so I'm really at a loss. I've read about overheating in this model which would seem to make sense but sometimes this will happen after the computer has been off for a day or so.

At a complete loss now.

Any assistance much appreciated!
 

A:beep beep..computer doesnt turn on

sure it's only 2 beeps? - nothing listed here for 2 beeps...

http://bioscentral.com/postcodes/dellbios.htm
 

https://forums.techguy.org/threads/beep-beep-computer-doesnt-turn-on.371060/
Relevancy 46.01%

My computer has been making this noise for quite some time now but it would only happen once every few days so Weird noise beep beep boop it didn t really concern me until Weird beep beep boop noise now because its Weird beep beep boop noise happening non stop The noise is definitely coming from system sounds I m not sure if this is related but under device manager there is an unknown device which i cannot account for as i put the computer together and I m staring in to the case rite now there is also a yellow icon by teredo tunneling pseudo-interface i have no idea what that is lately my computer just seems to be working really hard when idling the cpu is constantly spiking up to usage and my hard drives seem to constantly be spinning specscpu intel core duomobo abit ab ram gb ddr gfx geforce gtx hd seagate internal drives with os the other blank for storage In my mind there are two possibilities i have some sort of virus some hardware is malfunctioning either way i have no idea where to start and i was hoping someone could point me in the rite direction Thank You

A:Weird beep beep boop noise

You should check for malware first. I'll ask a mod to move this to the appropriate forum.

http://www.bleepingcomputer.com/forums/t/403177/weird-beep-beep-boop-noise/
Relevancy 44.29%

I took my laptop on the train with me, I kept it in my suitcase.
I get to my destination and when I turn it on, it boots fine and starts working but about 5 mins in it starts beeping for a while then shuts itself down.

Any help?

Before I took it I did not have my battery in, I leave it out usually because I rarely move it. I put it in for the trip. I doubt it makes a difference but there it is.
 

https://forums.techguy.org/threads/laptop-beep-problem.1166710/
Relevancy 44.29%

It s driving me crazy so I m asking now but it s after AM here and I may not be able to participate till tomorrow I rebuilt a computer for my niece -- WindowsXP SP As I usually do I put a shortcut to sndvol exe on the desktop and because that applet beeps when the slider is moved I disabled quot & Beep Different A Problem SndVol beep quot in Device Manager Everything was working fine -- no beep -- and had been for days when I put aside the computer five days ago Tonight I started it up and A Different Beep & SndVol Problem the beep was back on the sndvol slider Device A Different Beep & SndVol Problem Manager showed a red x on quot beep quot Right clicking quot beep quot offered the opportunity to disable quot beep quot obviously I expected it to say I could enable it I clicked disable restarted and returned The red x was still there and the beep was still active on the sound volume applet Device Manager now offered the opportunity to enable quot beep quot I tried that rebooted and returned The red x was gone and the beep was active on the applet -- as expected Disabled it again got the red x but still got a beep Finally I uninstalled quot beep quot Rebooted and quot beep quot was gone from Device Manager -- but the beep sound was still on the volume control Rebooted again -- without clicking on quot beep quot -- and quot beep quot reappeared in Device Manager I m at my wits end Any ideas what I m doing wrong overlooking Edit Is it the case that disabling quot beep quot only works if one or more -- or all -- quot Windows sounds quot are silenced via the Control Panel If so which sounds And why all the crazy OS actions I experienced Edit It appears that if the Windows Sound quot Default Beep quot is quot no sound quot disabling the Device Manager s quot beep quot will stop the sndvol slider from beeping Still -- what was all the craziness nbsp

https://forums.techguy.org/threads/a-different-beep-sndvol-problem.1025224/
Relevancy 44.29%

ummm, im having a hard time on my pc because it keeps on giving me a ONE LONG BEEP and doesn't have a signal on my monitor. it's the first time it happened to me and I'm confused because none of the sites I've visited told me on how to manage this beep. i also tried removing the RAM and VGA card for the beep to change but it didn't. i hope you guys could help me... thanks
 

A:one long beep problem

Please go to the Guides Forum and check the FAQs:

http://www.techspot.com/vb/topic60398.html
 

http://www.techspot.com/community/topics/one-long-beep-problem.73829/
Relevancy 44.29%

Motherboard: Foxconn M61PML-K
RAM : Kingston 2 Gig/DDR3 1333
BIOS: AMI

Scenario: PC turn on but no display, but after trying some troubleshooting afterwards its getting Non Stop SHORT BEEP same as when i remove the RAM, Since i already check some beep codes for ami ive never seen beep code like this. i dont have any xtra RAM to try but i will try to find soon, but as of now i need some opinion if do u think its really a ram problem. thanks in advance

A:beep code problem

Make sure your RAM is fully seated, and if you have a graphics card make sure it is fully seated, and the electrical connection is tight(that is, if it has a electrical plug)

http://www.sevenforums.com/general-discussion/277332-beep-code-problem.html
Relevancy 44.29%

Sometimes My Dell n series laptop was making three beeps while startup & not used to switch on.
After shaking, tilting laptop for sometimes it used to switch on normally without any beeps.
I thought some loose connection & given for service, They told chipset problem was there, it has to replace otherwise will not switch on.
I told them that it used to switch on after shaking, tilting. but they told it might happened before. Now it won't start untill repairing with new chipset & they cannt give back also with old condition & taken Rs3500.
My questions are,
1. How it used to works after tilting & shaking
2. Why they couldnot give back with old condition after they removed to trace the problem
3. What is the price for this repair?
4. How long it will works with new chipsets? 

A:Beep sounds problem

Hi,
Thank you for writing to us!
We would suggest you not shake or tilt the system. We would suggest you to run diagnostics as  much as this might be a hardware failure .
We would also suggest you to update the BIOS and check 
Kindly provide us with the service tag and email address.
Thanks
Robin

http://en.community.dell.com/support-forums/laptop/f/3518/t/19983688
Relevancy 44.29%

My computer at work is running Windows 2000 (SP4) and there is no sound card, nor any speakers. All the windows sounds are turned off. Whenever I get an Exclamation window (such as a delete confirmation), I get a system beep. I don't know what the problem is. I do not want to just turn off the system speaker, as I want to be aware of other errors by beeps. I just dont want it beeping at me everytime I get an Exclamation window. Any ideas what the problem might be? In looking around, possibly a registry problem?
 

A:Problem with the System Beep

Go into Control Panel then Sounds and Multimedia and under Sounds choose Exclamation and set the sound to none.
 

https://forums.techguy.org/threads/problem-with-the-system-beep.445221/
Relevancy 44.29%

I took my laptop on the train with me, I kept it in my suitcase.
I get to my destination and when I turn it on, it boots fine and starts working but about 5 mins in it starts beeping for a while then shuts itself down.

Any help?

Before I took it I did not have my battery in, I leave it out usually because I rarely move it. I put it in for the trip. I doubt it makes a difference but there it is.

Relevancy 44.29%

Hi again Fixed the old problem of the computer rebooting I just gave up and awaited a new CPU through the post Fitted the new CPU now when I boot it up I'm not getting any POST beeps or display through monitor I've read topics around tinternet and everybody says it's mobo or CPU The mobo is less than a month old and the CPU came two days ago I'm pretty confident that it is neither of them if it turns out to be I won't be surprised though I've ran a basic boot with only mobo CPU and HDD's attached same problem Checked the pins on the processor and in the CPU slot all seem pretty good All wires that are supposed to be connected are connected so can't see a problem there I a problem beep - New POST getting Not also disassembled and rebuilt the PC while it was completely unplugged on the floor so don't think I shorted anything Please somebody help Computer Spec Intel Core Quad Ghz Corsair Vengeance Gb DDR RAM x Gb Asus DDR Mobo XFX Radeon HD Mb Windows Ultimate

A:New problem - Not getting a POST beep

I've also tried refitting the old CPU which I know worked and still not getting a POST beep at all

http://www.sevenforums.com/bsod-help-support/224278-new-problem-not-getting-post-beep.html
Relevancy 44.29%

I had partitions one with one with XP It code and HDD beep problem was like this for a few months I was in the XP partition restarted the pc so i could go to the partition When i restarted it it started beeping beep code beeping and wouldn t stop The whole time i was in it was beeping I restarted and went beep code and HDD problem into XP this time and once the XP loading screen came on it stopped When ever i was in it would beep but XP didnt So i figured that i would just delete the partition using partition magic Anyways to make a long story short something went wrong It never set the Xp partiton to primary beep code and HDD problem like it was supposed to Now i cant do anything with the HD at all I tried to set it to primary with fdisk but it wont do it I tried making it primary with partition magic but it says that the partition is quot dismounted improperly quot Their website says to run checkdisk but i cant get it to I got pissed and figured that i would just delete it Fdisk wont delete it either So i bought a new HD and put only XP on it It still beeps until it gets to the loading screen But the main thing i need now is to get into the old HD i forgot about some of the things on it and i need some of it specs beep code and HDD problem Soltek SL- DRV awardBios Asus Geforce ti vid card WD gig HDD the old one is IBM gig Athlon XP PC ram nbsp

A:beep code and HDD problem

When you deleted 98, you deleted the boot info for XP, that is why you couldnt get into XP. The 98 partition held the info. You could try loading 98 onto it, then load PartitionMagic & see if you can view the Partitions. If the XP partition was NTFS, fdisk cant set it active. It reads the partition as non-DOS, and can only delete it. It might even take a few attempts to delete it, but it will. It has happened to me on occasion. The beeps indicate a problem, & should have been investigated first, esp if only one OS had them. Could have been an incompatible driver in 98.
 

https://forums.techguy.org/threads/beep-code-and-hdd-problem.123979/
Relevancy 44.29%

hello, i have a hp a335w i just installed a new power box 2 days ago pc was working fine ,but today when i turned pc on i got one short beep then one long continues beep i disconnected the memory , harddrive, cd, one at a time to check for problem but still have the same problem pc will not boot up
 

Relevancy 44.29%

Hi there i seriously need you guy's help with my model P Y I continually hear short beep and long beep when i try to boot up my pc According to hp it's a memory issue but i proved that wrong I have gone thru I beep,1 beep my pc 1 help long short need has removing the RAM checking if one of the modules are bad they are all good gb x I also removed the windows harddrive and i still get the beeps i described above I made sure all cables are seated properly and i cleaned the entire MOBO for dust including the CPU I get a blank on my monitor nothing shown When i plug in the keyboard i don't get any power lights etc num lock caps lock The mouse is getting power I replaced the power supply still getting the beeps and i can remove all cables hd mouse KB and the beeps continue Please help me guys as i have hit a dead end and i appreciate your time Sincerely nbsp tech

http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-and-Recovery/I-need-help-my-pc-has-1-short-beep-1-long-beep/td-p/5711897
Relevancy 44.29%

Is my video card has this code?

A while ago it takes time i open my notebook i'm worried this is second time it happened.

A:one beep long followed two beep short

What model Samsung? Have you checked the Samsung site for your specific model to see if there is listing of the beep codes?

http://www.sevenforums.com/general-discussion/260516-one-beep-long-followed-two-beep-short.html
Relevancy 44.29%

the BIOS doesn't beep during startup but can beep later such as when i hold three buttons at a time

A:My computer does not beep on startup but can beep later

Has it ever beeped at POST?

I've had systems that did, some that didn't (probably because I didn't have the system speaker properly connected).

Louis

http://www.bleepingcomputer.com/forums/t/249394/my-computer-does-not-beep-on-startup-but-can-beep-later/
Relevancy 44.29%

Hi Today I replaced my old graphics card with 1 1 Beep Long Short Beep, a new GeForce GT and also added a new Kingston GB Ram Card I installed both of them then restarted the computer since then it has only powered on and playing short beep then long beep I ve tryed everything I can think of ranging from taking out everything new and putting it back to before I added the new items to completely taking out all RAM sticks and reseating them I m not sure how a brand new unopened GB ram stick that fit perfectly and a brand new right out of the box graphics card can cause a problem like this I ve been through the ins and outs of the internet trying to find 1 Short Beep, 1 Long Beep a solution but nothing has worked Hoping someone can think of a unique way to fix this or how it could have possibly happened 1 Short Beep, 1 Long Beep in the first place I dont buy anything used everything placed inside my computer was is brand new when it was purchased Any help comments on solutions would be greatly appreciated thanks nbsp

Relevancy 44.29%

I was just using my PC yesterday everything is normal It was hot around C I think Around P M my PC suffered BSODS I can't upload the dmp files because I can't open it I thought its just overheating so I turned it off and after a few minutes the second BSOD appeared I restarted my PC and the one short beep and one long beep is sounding I checked my RAM and one beep One long short beep, tried to switch it to another bank but the beeping is still there My video card temp was - C before the first BSOD happened What can I do to fix this Specs HP Pavilion P D year months Pentium Dual Core CPU E GHz year months Foxconn A C year months MB RAM Samsung rx PC u year months Palit NVIDIA GeForce GT MB month weeks Seagate Barracuda One short beep, one long beep ST AS GB RPM year months Western Digital BEV External HDD GB year months Bestec ATX- - Z Watts year months

A:One short beep, one long beep

Is it possible you are hearing 1 long - one short?
That might indicate a BIOS CHECKSUM error, depending on the brand of BIOS.

You can try a ClearCMOS procedure (CLRTC is the same thing):
Note all your current BIOS settings
Shut down the computer > remove the power cord.
Remove the 3v motherboard battery.
Move the CLRTC jumper from pins 1-2 to 2-3.
Touch a metal part of the case and Press and Hold the reset button for approx. 30 seconds to discharge all power from the board.
Put the CLRTC jumper back on pins 1-2.
Replace the 3v battery > replace the power cord > boot.
Immediately go back into BIOS and reset all your preferred settings. If the CLRTC worked you will need to reset the date and time.

http://www.sevenforums.com/general-discussion/278872-one-short-beep-one-long-beep.html