Windows Support Forum

Slow open Network Printer Properties

Q: Slow open Network Printer Properties

The probelm only happend on 1 win7 PC, suddenly the PC slow to open some network printer properties that also makes slow to print.

1. On the PC nstalled 3 Network printer A,B,C open B properties is normal fast, but slow to open A,C.
2. Others PC also installed those 3 network printer and No problem.

I have replace NIC, Reinstall/Repair Win7 but no success, How to trace/diagnose PC to Printer communication so I can figure out what the problem is.

Thanks

Relevancy 100%
Preferred Solution: Slow open Network Printer Properties

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Slow open Network Printer Properties

Printer shares often work more quickly and efficiently with uPNP enabled in your router, depending upon exactly what you are calling a network printer...

http://www.sevenforums.com/network-sharing/208665-slow-open-network-printer-properties.html
Relevancy 17.63%

To start off my laptop is an Asus G VW-AS The wireless network adapter is an Atheros AR WB-EG The issue I m having only starts when I play an online game It s not a specific one it happens with all my games After about a few matches I will begin to experience terrible lag spikes Ranging from - ms sometimes even going up to over Usually the spikes are permanent I will jump to around ping and hover in that general number with it occasionally sliding back down to my normal only to immediately spring back up again After this begins to happen any application I use that uses internet internet browser skype etc also lags is severely slowed down This lag is never experienced on any other system using our wireless internet which makes me believe it is in fact my laptop s wireless adapter that is the problem Doing a windows troubleshoot on the adapter DOES fix it but it only fixes it for about to minutes and then I begin to lag adapter network Problems with wireless again Also the troubleshooter seems to only be able to fix it once If I try to troubleshoot the adapter again after already fixing it before that way the troubleshooter will tell me that it couldn t find anything wrong Manually restarting the adapter only works once as well Restarting the computer does not help the problem If the laptop is shut down for a few hours and started back up the adapter will work properly as long as I do not start a game Could anyone help tell me how to stop this from happening Do I need to get a new adapter or is there something I can do for the current one nbsp

A:Problems with wireless network adapter

Are you sure it is not an issue with your router? Also I dont know where to get Atheros drivers other than from the manufacturer (vaio, lenovo, etc) website. There are no official drivers
 

http://www.techspot.com/community/topics/problems-with-wireless-network-adapter.188964/
Relevancy 21.07%

I have a group of computers in a small office without a server that are connected and share via homegroup. When I added a new laptop with win 8.1 to the homegroup, I couldn't ever access the shared printer which is attached to the win 7 desktop. I deleted and recreated the homegroup multiple times from different computers and nothing seemed to change the situation. I deleted the homegroup completely and just tried to share the printer separately connecting via computer share name and still not good. Now if the win 8.1 computer can recognize the printer, none of the win 7 computers can print to it and vice versa. I need them all to be able to share the printer at the same time and share 2 folders between all of them. How can I accomplish this besides down grading the 8.1 to win 7 and installing win 7 on it. Thanks for the assistance
 

A:Sharing printer and files between win 7 and win 8.1 computers

If the printer has Ethernet support, connect it to the router and then use Add Printer as a Network printer on every PC (ie not directly connected to any PC) and at least that will solve one issue. Remember to get the correct print driver for each system; Win/7 vs Win/8.

I'll surf for the sharing issue and post back ...
 

http://www.techspot.com/community/topics/sharing-printer-and-files-between-win-7-and-win-8-1-computers.216549/
Relevancy 16.77%

I have an SSD Intel Series GB SATA Generic Single Pack which on my PC has a maximum speed rate at MB sec but on other PC has MB sec My PC features OS Name Microsoft Windows Enterprise Version Service Pack Build OS Manufacturer Microsoft Corporation INTEL SSDSC BW A GB SATA quot SSD System Manufacturer Dell Inc System Model OptiPlex System Type x -based PC Processor Intel R Core TM i - CPU GHz Mhz Core s Logical Processor s BIOS Version Date Dell Inc A SMBIOS Version Windows Directory read SSD 264mb/sec slow rate C Windows System Directory C Windows system Boot Device Device HarddiskVolume Locale United States Hardware Abstraction Layer Version quot quot Installed Physical Memory RAM SSD slow read rate 264mb/sec GB Total Physical Memory GB Available Physical Memory GB Total SSD slow read rate 264mb/sec Virtual Memory GB Available Virtual Memory GB Page File Space GB Page File C pagefile sys SiSoftware Sandra Benchmark Results Drive Score MB s Results Interpretation Higher Scores mean Better Performance Binary Numeral System base GB s MB s MB s kB s kB s bytes s etc Benchmark Status Result ID INTEL SSDSC BW A GB SATA quot SSD Computer Dell OptiPlex Dell GY Y Platform Compliance x System Timer MHz Use Overlapped I O Yes I O Queue Depth request s Block Size MB nbsp

A:SSD slow read rate 264mb/sec

There's a known issue with SSD storage:

SSDs degrade in performance overtime - -
​DON'T run benchmarks and you don't need defrag either.
 

http://www.techspot.com/community/topics/ssd-slow-read-rate-264mb-sec.216431/
Relevancy 18.06%

First of all, sorry for my bad english.
My pc was working perfectly for about a year now, but these days it started having problems.
In the past few weeks it started disconnecting from the internet with the message: you don't have a valid
ip configuration. (It was working on the other pc connected to the router with lan, and on the notebook connected through wifi)
A reboot of the pc/router did always solve my problem in these situations.
Yesterday, my internet connection started connecting/reconnecting, and I couldn't solve it in any way, not with
a restart, and not with that network repair tool (idk it's name, I have hungarian windows). When it stayed connected for more then 2 seconds I was even able to load google, youtube, other sites,
I tried some solutions, like disabling the energy saver settings, setting it to 10mb half duplex, etc, but nothing worked, my
internet kept connecting/reconnecting.
Today I started my pc and it works perfectly.. Any ideas on how to solve it? I have the newest lan driver.

My mobo is Asrock 960gm-vgs3 fx.
 

A:Network keeps reconnecting

It appears that you manually configured the IP for at least one system.
DON'T do that - - make sure all systems use DHCP
 

http://www.techspot.com/community/topics/network-keeps-reconnecting.216254/
Relevancy 19.35%

After months of build-up, AMD has finally unveiled its true next generation graphics card. The Radeon R9 Fury X broke cover at E3 last week and the review embargo lifted just days ago. While it's not the Titan killer some...

Read more
 

A:Weekend Open Forum: AMD or Nvidia?

And it starts!
Started with amd 7970
Then went nvidia 770sli now 980ti.
I just really like the physx and 3d nvision
 

http://www.techspot.com/community/topics/weekend-open-forum-amd-or-nvidia.215859/
Relevancy 21.5%

I have HP LJ p4014. I was wondering if there would be a difference between using a maintenance kit thats 220v on a 110v printer. Any help would be good.
 

A:Printer 110v vs. 220 v.

What does that maintenance kit do? Because you can easily go into HP software and order your printer to clean printheads or align them.
 

http://www.techspot.com/community/topics/printer-110v-vs-220-v.191819/
Relevancy 17.2%

Resolved DNS on other on one problem working laptop, DNS network computers problem on one laptop other computers on network working I returned home for the holidays with my laptop running Windows Enterprise -bit When I connect to the wireless network my laptop reports that it is connected with internet access but there is no browsing capability at all P P works Steam works but Chrome Firefox Steam browser give me DNS problem on one laptop, other computers on network working the quot This webpage is not available quot page telling me that the DNS lookup failed All the other computers at home are working happily My settings were to obtain an IP address and DNS server address automatically nslookup said DNS request timed out It didn t work with the wireless or the wired internet with an ethernet cable I set up another network by using my iPhone as a hotspot to make sure it wasn t an issue with all connections and my computer could browse just fine using the iPhone hotspot But it didn t work with my home connection The first thing I tried was to use openDNS s DNS addresses and with my home connection It still failed and nslookup gave the same quot DNS request timed out quot I reset the modem router it s combined unfortunately to factory settings and tried directly connecting with an ethernet cable again It worked for half a second and I opened webpages before it stopped and gave the DNS errors again I tried the wireless internet and it still didn t work I can connect to the modem router I made a guest network just to try it and I got DNS errors again When I reconnected to my primary network it worked for half a second again then stopped My next attempt to fix it was going to the cmd prompt and typing ipconfig release then ipconfig renew I restarted my computer and tried again but I still received the same errors with P P working like before I turned off my firewall and tried but it still didn t work Then I tried ipconfig registerdns restarted my computer and tried again Still didn t work At this point IPv has been disabled but it s still not working I restarted the modem router multiple times but it does nothing to alleviate the problem I have Microsoft Security Essentials did a scan nothing detected Also tried System Restore to two days ago got an error about how it failed Summary Using openDNS address Turned off IPv ipconfig release ipconfig renew ipconfig registerdns no virus trojan system restore failed None of the above worked Other computers at home using the ISP s provided DNS server work My computer works with other connections but not my home network Is there anything else I can try Thanks in advance nbsp

A:DNS problem on one laptop, other computers on network working

Fe3C said:





Summary:
Using openDNS address.
Turned off IPv6
ipconfig /release
ipconfig /renew
ipconfig /registerdns
no virus/trojan
system restore failed

None of the above worked.
Other computers at home using the ISP's provided DNS server work[1].
My computer works with other connections, but not my home network.Click to expand...

Good work. The router is fine[1] so don't fuss with it anymore.

Look for an updated driver for your WiFi adaptor.

On any working system run IPCONFIG /ALL and compare it to the results on the failing system. Look for missing Gateway address or IP address like 169.x.y.z

Some concern re failing system restore, but that's not a networking problem per se.

Work on a wired network first and then move to wifi.
Empty all manual settings on the LAN Connection (get properties, scroll to tcp/ip, click property button - - check ALL tabs; delete everything.

You should be able to PING 8.8.8.8 and then PING google-public-dns-a.google.com.
This shows the LAN adaptor has connectivity and DNS resolution.

Now do the very same sequence with your WiFi connection.
Disconnection from the router and then reconnect.
Inspect IPCONFIG /ALL again to look for valid IP addr, gateway addr and valid DNS settings. (not the OpenDNS you had before).

ping 8.8.8.8 ; if this doesn't work, then the WiFi settings are invalid even before DNS is an issue.
 

http://www.techspot.com/community/topics/dns-problem-on-one-laptop-other-computers-on-network-working.174565/
Relevancy 18.06%

Hey guys,

I had a quick question about a network at home.

My house is 15m tall and 9m wide, I want to network 3 computers (mine, wife, son).

Should I wire the house with Ethernet cat 5e cable and put a 100 base T switch?
Or
Just put a Wi-Fi access point and Wi Fi cards for the 3 computers.

I prefer wireless, but I?ve heard Ethernet would have slightly faster speeds due to less aerial interference.

Suggestions? Solutions? Thank you!
 

A:A network for home? Which one?

First of all... don't put a 100 base T switch anywhere but the backup bin. If you're going to bother wiring anything put in GbE as it's inexpensive now. Also, if you're going to bother with any wiring then I'd put in the best/fastest type I could find to future proof it as much as possible. Fishing cable isn't something you want to repeat in a couple of years.

To more directly answer your question, Wi-Fi will probably be fine for you depending on the distance from your WAP (wireless access point) and what your walls are made of. You'll also need to keep in mind any other Wi-Fi interference so the distance to your neighbors can have an affect. All that being said any modern WAP will be faster than a 100 base T switch under normal conditions when it comes to throughput (how much data you can move) - but worse when it comes to latency (how long a specific bit of data takes to get from one point to another). If you're playing games you'll want low latency. If you're just streaming content or moving files around then you just want throughput.
 

http://www.techspot.com/community/topics/a-network-for-home-which-one.213242/
Relevancy 17.63%

Ok so I do not know if this is the right forum or site to ask this question to be honest It applies to Linux though more applies to a networking issue So here is the problem I currently live in an apartment that has its own network that is given to them by their ISP So my router is getting its ip address from their DHCP server router and then I give out my own problem Apartment Network IP address via my own router So Im trying to be able to SSH into my machine or even just to remote desktop onto my Windows side I have my router set up accordingly and I can ssh into my machine when I am on their own network not my own but when I am away I cannot because Apartment Network problem my routers IP address is unique in the apartment complexes network Does anyone know a solution to this I was thinking a VPN into their network Apartment Network problem and then SSH into my own afterwords Problem is I m really not sure if this is a solution and if so How do I do it Thank you for your time I hope someone has a solution to my problem nbsp

A:Apartment Network problem

This is a STATIC route or PORT FORWARD problem and without the consent the apartment owner, neither are possible.

Your data flow is

Code:
ISP == Apt.router---Your.router---your.pc
Assume the Apt.router is at address 192.168.1.1
If yours is anything else, then your lan is isolated from the apt and you have great security.
* to get Public access (eg from work) to your pc, you need to
cross the Apt.router nat, get to your.router and port forward to your pc - - complicated.​If your.router is on the Apt.lan (meaning you disable DHCP in your router)
you are exposed to all the other apartments,
and still need port forward to your PC, and that requires a FIXED address assignment in the apt.router.​
IMO, the conclusion is this is non-trivial, has dependencies on the good will of the apt owner/tech support guy and requires extra diligence on your systems for security & privacy.
This would need (imo) to be more than just 'I want to play games on the Internet'
 

http://www.techspot.com/community/topics/apartment-network-problem.213209/
Relevancy 17.63%

So I'm in the market for a new wireless card for my desktop. The last one I bought was a piece of crap from the start. You don't generally see network card reviews. Was wondering what some good quality options would be.
 

A:Network card recommendations?

The best option would probably be a dual-band one that has 802.11ac support; if you've got an AP that supports the standard, it'd be worthwhile investing in that kind of card. They can be kinda expensive though (usually around $100 from what I've seen).
 

http://www.techspot.com/community/topics/network-card-recommendations.208722/
Relevancy 18.92%

Anyone that spends a considerable amount of time in front of a monitor can attest that finding the right mouse is a must. While there are plenty of boxes to tick when searching for a suitable pointer, for me, it...

Read more
 

A:Weekend Open Forum: What kind of mouse do you use?

Roccat Kone XTD (laser). It's the best mouse I've had so far. My Death Adder has been demoted to closet duty.
 

http://www.techspot.com/community/topics/weekend-open-forum-what-kind-of-mouse-do-you-use.212356/
Relevancy 16.77%

The Samsung 840 EVO has been one of the most troubled solid state drives since its mid 2013 launch. Last year, users discovered that the drive suffers from performance degredation in the long run, with read speeds dropping off dramatically...

Read more
 

A:Samsung addresses slow 840 EVO SSD performance with another patch

I have bought several 840 drives myself, and our newest machines at work have 120GB 840 Evos. After installing Magician 4.6, I was presented with the option to upgrade to the EXT0DB6Q firmware. I then disabled rapid mode, and ran the benchmark testing(with rapid mode enabled, you're basically measuring your RAM). I saw about a 200 MB/s increase compared to my lowest score for Sequential Write, and more modest gains elsewhere. Note that with Magician 4.6, Standard performance optimization is not supported on Windows 8 or higher. However, a new "advanced" option is available, that performs a complete rewrite, refreshing data and alleviating access delays. It took about 10 minutes to complete on my system with about 60 GB used. I'll be doing more testing, and anxiously awaiting a Mac compatible ISO, as Magician is not available for OS X.
 

http://www.techspot.com/community/topics/samsung-addresses-slow-840-evo-ssd-performance-with-another-patch.212470/
Relevancy 17.2%

I just purchased a to USB 2.0) as slow report USB be Could 2.0? hub 1.1 (too a -port quot USB quot hub with Power Adapter off eBay to replace a USB Could a USB 1.1 hub report as USB 2.0? (too slow to be 2.0) hub that I lost the power adapter for When I plug it in Windows claims to detect it as a quot USB Could a USB 1.1 hub report as USB 2.0? (too slow to be 2.0) hub quot and auto-installs the drivers for it but when I plugged my webcam into it I got a message telling me it would quot perform better if I plugged it into a USB port quot Suspicious I tried a few file copy tests to a Flash drive and it took over minutes to copy an M file to it plugged directly into a USB port it took about seconds I plugged the new hub into the exact same USB port my old unpowered hub was plugged into this is a new PC with USB ports No USB ports Removing the new hub and plugging my old one back in not only did file copy speed return to normal seconds for an M file but no quot speed warning quot when plugging my webcam into it So my questions are Could a USB hub incorrectly report it is a USB hub and Could it truly be a USB hub and it just installed the wrong drivers it s a generic hub and should use the same driver as the other PS I plugged the new hub into a USB port to see if it had any effect and the same M file copy took over minutes nbsp

A:Could a USB 1.1 hub report as USB 2.0? (too slow to be 2.0)

What is the make of the hub? The issue could be with the quality of the hub itself.
 

http://www.techspot.com/community/topics/could-a-usb-1-1-hub-report-as-usb-2-0-too-slow-to-be-2-0.212307/
Relevancy 15.05%

I have a desktop computer that is running on Windows Xp, up until this morning, everything was fine, I could connect to the internet with no problem.

I turned on my computer, and it is telling me that the network cable is unplugged, as well as my network is not showing when i go to "my network connections"

But yet.....

I AM connected to my router, and there is no problem with the cord (I tried it on different computers as well as my Xbox 360 on the same port....so I know its not the router)....when I go into device manager, everything seems to be working correctly, and my network adapter and ethernet card both are marked as working properly.

Any ideas how I can fix this issue ?
 

A:"Network cable is unplugged" but its really not..

sadgyrl514 said:





I have a desktop computer that is running on Windows Xp, up until this morning, everything was fine, I could connect to the internet with no problem.

I turned on my computer, and it is telling me that the network cable is unplugged, as well as my network is not showing when i go to "my network connections"

But yet.....

I AM connected to my router, and there is no problem with the cord (I tried it on different computers as well as my Xbox 360 on the same port....so I know its not the router)....when I go into device manager, everything seems to be working correctly, and my network adapter and ethernet card both are marked as working properly.

Any ideas how I can fix this issue ?Click to expand...

Try rebooting,
 

http://www.techspot.com/community/topics/network-cable-is-unplugged-but-its-really-not.166539/
Relevancy 21.07%

Before I start I want you to know that the printer works When I plugged it into my computer it was automatically recognized drivers were downloaded from windows update and I was printing in less than a minute When I plunged it with OfficeJet HP printer Troubles 5610 into my friends laptop the actual owner the issues begin The troubled computer is HP laptop with Win x When I plugged it in via same USB cable I used with mine it was automatically recognized drivers were downloaded from windows update but I was not able to print anything I went to HP website and downloaded the entire software package and still nothing When I am in the devices and printers window the computer recognizes when the printer is plugged in and and when it is not But I can not even print a test page The funny thing is that I can scan from the printer to Troubles with HP OfficeJet 5610 printer the laptop but I can not print to it There are other printers connected to the laptop both network and USB and they work just fine Here is Troubles with HP OfficeJet 5610 printer what I did so far I tried Troubles with HP OfficeJet 5610 printer the automatically installed drivers I downloaded the HP recommended drivers I have restarted the spooler There is nothing stuck in the job list I have manually removed HP drivers and started again I have used the HP driver removal tool maximum level and started again I have set the printer to print directly to printer and bypass the spooler And I still can not print but I can scan Any thoughts anyone nbsp

A:Troubles with HP OfficeJet 5610 printer

How much Ram in laptop? Available space on HDD?
 

http://www.techspot.com/community/topics/troubles-with-hp-officejet-5610-printer.186225/
Relevancy 16.77%

Some Samsung 840 EVO SSD owners noticed their drives were slowing down last year, specifically the read speeds. Samsung issued a patch to fix the problem in October but it was only a temporary solution as slowdowns returned a few...

Read more
 

A:Samsung to fix slow 840 EVO SSDs with ''periodic refresh'' feature

Good news.
But where is the 4.6 version of software for us 840 EVO owners?
 

http://www.techspot.com/community/topics/samsung-to-fix-slow-840-evo-ssds-with-periodic-refresh-feature.211495/
Relevancy 17.2%

hi all just bought emachinesD620-261G16Mi MODEL NO -ms2257 from a y whos had enough of it..manufactured in 2008 she bought it and was very slow so as insurance still valid she sent it back , they had it 8 months then she got it back and still same problem press power on button and takes a while to load to desktop but then every application u click I get the little timer circle come up and everything takes ages please help .. it has
amd athlon 2650e cpu , 1gb ram ddr2 160gb harddrive please help

just to add on it now and I close an application or even a photo and I get the timer circle takes at least 30 seconds before I can click anything else . and sometimes all the icons on desktop dissapear then reappear after a while
 

A:Emachines running very very slow

Have you scanned for malware? (the obvious IS my speciality)
 

http://www.techspot.com/community/topics/emachines-running-very-very-slow.181026/
Relevancy 17.63%

Recently my Gbps has taken a serious nosedive I was around Gbps then it dropped dl Adapter 0.84Gbps Network The other computers on the network are getting Network Adapter 0.84Gbps dl great speeds it s just my computer My computer is running fine It s just the connection speeds This isn t just happening on WI-fi it s also happening when I plug in the Ethernet cord My network adapters are Broadcom n Network Adapter Microsoft Kernel Debug Network Adapter Qualcomm Atheros AR PC-E Gigabit Ethernet Controller NDIS They are all up to date And I use Avast internet security Also I ve cleaned the cache in both firefox and chrome browsers I ve also removed all but add block add-ons I m using AARIS modum router through time warner cable And again the Network Adapter 0.84Gbps dl other computers are getting great speeds always up of Gbps I even checked my Mom brand new computer which is getting upwards of Gbps I ve called TWC they sent someone the wires were a bit loose and it fixed everyone s laptop but mine Please help I m clueless here Here is the Broadcom n Network Adapter settings - auto mhz - Disabled n Preamble - Auto Antenna Diversity - Auto AP Compatibility Mode - Higher performance Bandwidth capability - b g MHz Bluetooth Collaboration - Auto BSS PLCP Header - Auto Short Long BT-AMP - Enabled Disable Uon Wired Connect - Disabled Fragmentation Threshold - IBSS g tm Protection Mode - Auto IBSS Mode - b Only Locally Administered MAC Adress - not present Minimum Power Consumption - Enabled Mixed Cell Support - Disabled Power Output - Priority amp VLAN - Prioroity amp Vlan Disabled Rate - Best Rate Roam Tendency - Auto Roaming Decision - Auto RTS Threshold - Shorti GI - Auto WMM - Enabled WZC IBSS Chaneel Number - MHz XPress TM Technology - Disabled nbsp

A:Network Adapter 0.84Gbps dl

Also I recently installed windows 8. I've tried all sorts of things to get it to work. Still no luck.
 

http://www.techspot.com/community/topics/network-adapter-0-84gbps-dl.210602/
Relevancy 15.05%

I have an installation folder on my main machine(Windows 7) with all my software. I have repeatedly run into issues connecting odd devices to my shared folder. This time I have installed Windows 10 Technical Preview (on a different machine) and don't understand why it tells me I can't access my own machine. After all these years, you would think user friendly would be a reality. It seems to be a coin toss as to which machines will connect. I hate never knowing I can access my own machine without issue. Here I am trying to install applications but yet I can't get to my storage location.

What is the secret to sharing your machine, so that anyone on the same network can access shared folders?

Edit: I always turn on "Network Discovery" and "File and Print Sharing".
 

A:Network connection issues (year after year)

I'm more brutal via the firewall:

set trust localhost and your lan ip's, eg 192.168.0.1/24

then add two rules for only the PRIVATE PROFILE

inbound allow tcp/udp from 192.168.0.1/24 to any for ports 137-139,445
outbound allow tcp/udp from any to 192.168.0.1/24 for ports 137-139,445
I use a much more complicate scheme in reality to enforce known vs unknown devices and to segregate WiFI from wired access, but that's just me.

In services, ensure these are running

Bonjour Service ( mDNSResponder)
fdPHost
Network Connections
Network List Service
Network Location Awareness

 

http://www.techspot.com/community/topics/network-connection-issues-year-after-year.208880/
Relevancy 18.92%

With Broadwell and Skylake desktop CPUs expected to launch next quarter, the urge to upgrade my computer has never been stronger.

Read more
 

A:Weekend Open Forum: What CPU powers your computer?

Got an i5-2500k in my gaming computer, and a C2Q Q8200 in my home server. Because of the small enclosures they are in I have not overclocked them, with the watercooled 2500k being in a Prodigy case stuffed to the gills, and the Q8200 is in a 2U rack case.

Not sure about the server, but I know with Star Citizen in the distant horizon, I'm very compelled to upgrade around the end of the year. This is driven less by my CPU and more by my graphics card (watercooled GTX 570) and memory, which I only have 8GB.

edit: oh yeah, and my XPS 12 has an i5-4210.
 

http://www.techspot.com/community/topics/weekend-open-forum-what-cpu-powers-your-computer.208477/
Relevancy 18.49%

A factory AMD or Intel heatsink is something I simply won't consider when building a computer. I acquired my first aftermarket cooler 15 years ago to assist in overclocking an AMD Athlon 500 (it reached 800MHz with help from a...

Read more
 

A:Weekend Open Forum: What heatsink / water kit cools your computer?

Mine is water cooled. Except instead of liquid its solid. And instead of water its aluminum. And instead of a pump its got a fan. Its actually a laptop.
 

http://www.techspot.com/community/topics/weekend-open-forum-what-heatsink-water-kit-cools-your-computer.209240/
Relevancy 21.07%

Hopefully someone can answer this as im baffle, my computer will turn on and of with no problem as ling my printer is plug in but if printer cable unplug it won't turn on but if printer cable in plug in it will turn on but while the comptuer turn on and I unplug the printer cable it will shut down nothin making since but as long the printer is unplug it will not start or boot blank screen but printer plug in I can get to the boot or cmos screen please help Thanks

PS it a Dell PP17L Latitude
 

http://www.techspot.com/community/topics/pc-wont-turn-on-if-printer-not-plug-in.208502/
Relevancy 21.07%

Hello. I speak English a little. Therefore, I can do a lot of errors in my sentence but I hope for understanding.
Please, help me fint out the schematic diagram for the printer Samsung ML-216*.. Or who has it?
Thank you so much and have a nice day!
 

A:Looking for the schematic diagram for the printer Samsung ML-216*

dnshulga said:





Hello. I speak English a little. Therefore, I can do a lot of errors in my sentence but I hope for understanding.
Please, help me fint out the schematic diagram for the printer Samsung ML-216*.. Or who has it?
Thank you so much and have a nice day!Click to expand...

No guarantee, but see if this will help http://www.manualslib.com/manual/201828/Samsung-Ml-2165.html?page=3#manual
 

http://www.techspot.com/community/topics/looking-for-the-schematic-diagram-for-the-printer-samsung-ml-216.208342/
Relevancy 21.07%

Hi,

Can someone please recommend me a colour laser printer for home use? Resolution should be at least 1200 x 1200 dpi. The option to print both sides of the paper would be nice. Multiple paper trays not necessary, nor anything else that will add unnecessary bulk to its size. There should also be connection for Ethernet and USB. Preferable that it uses separate toner cartridges for the different colours, so if one colour runs out then only that colour needs changing rather than the whole lot.

Thanks.
 

A:Recommend me a laser colour printer please

You realize these are very expensive to both purchase and on a cost/page.
 

http://www.techspot.com/community/topics/recommend-me-a-laser-colour-printer-please.207641/
Relevancy 17.63%

So this thread is probably going to have a lot of information on it Timeouts Other Network Issues & but please don Timeouts & Other Network Issues t be discouraged I really really need help with some issues I ve been having and if someone could solve this for me that would be amazing So I ve been experiencing timeouts It seems I get timeouts whenever using Timeouts & Other Network Issues some sort of wired connection If I used an ethernet cable connected to my router I would get timeouts in several applications such as Minecraft and Teamspeak If I used Wireless I was fine So after lots of troubleshooting I couldn t find a fix so I ve been using Wireless ever since Lately however my wireless has been unusually slow not for everyone in the house just for me So what I did to solve the issue is I setup a D-Link DIR in my room to act as a Wireless Access Point I now get slightly faster speeds and bar connection rather than the bars I was getting previously Now I thought I wouldn t get these stupid timeout errors when connecting to this Wireless Timeouts & Other Network Issues Access Point turns out I still do On Teamspeak for example I will be talking to people and everything will be completely normal I won t lag or anything and then BOOM I get disconnected As I said no lag no warning I just get disconnected It s almost as though my router is randomly cutting me off So what I thought I d do was replace my primary router BoB Lite with the D-Link DIR and then use Wired connection because I assumed that the BoB Lite was causing the timeout issues Now I can t even connect to anything wired I must have changed a setting when troubleshooting or something But now I can t source internet from my laptop ICS and I can t connect to my original or new router wired The only way I can currently get internet is by using the DIR in my room but I still get timeouts when using applications such as Minecraft and Teamspeak So yeah multiple issues Firstly if I could just solve the timeouts then that would solve everything I could continue connecting to the modem in my room and everything would be fine OR is there a way I could someone reset all my network settings that I may have messed up when troubleshooting As I can no longer connect to any modem with a wired connection not even the DIR which could have solved the problem If anyone could help me out that would be GREATLY appreciated This is a really annoying issue and I ve tried to troubleshoot it myself for ages now but with no luck IF anything in this thread doesn t make sense to you please tell me and I ll gladly explain myself Additional Summarised Information My primary router is a BoB Lite my ISP is iiNet The modem in my room is a D-Link DIR I m using a NetComm N USB Adapter to connect to Wi-Fi I m using Windows Ultimate -bit Thanks very much Innug nbsp

A:Timeouts & Other Network Issues

Get a command prompt
enter PING 8.8.8.8

does that timeout or return timing values?
 

http://www.techspot.com/community/topics/timeouts-other-network-issues.207544/
Relevancy 21.07%

This ink cartridge http://www.epson.com/cgi-bin/Store/jsp/Product.do?BV_UseBVCookie=yes&sku=T048120[1]

Is labelled as "T048120-S" on some online stores... others it's labeled just as "T048120"

What does the "-S" mean? single cartidge?
 

A:Question about Epson printer ink model #

Probably means standard capacity.
 

http://www.techspot.com/community/topics/question-about-epson-printer-ink-model.207580/
Relevancy 17.2%

My computer is being running slow and is choppy also, I'm making sure the system is clean right now.
 

A:Computer slow and choppy

Problem solved, runned some anti-malaware programs and cleaned my computer.
 

http://www.techspot.com/community/topics/computer-slow-and-choppy.207403/
Relevancy 16.34%

When I am playing a video with any browser it is very choppy (sound and video).
Even Window sounds are choppy. It seems like if I move the mouse it gets worse.

Computer is very slow to open programs, even though the system idle process
is at 99% before starting another progam. This happens even when no browser is open and the
anti-virus software is disabled.

I don't know is this is a software or hardware issue.
 

A:Computer very slow. Choppy video and audio playback from browsers

Post this here:
http://www.techspot.com/community/forums/virus-and-malware-removal.28/
See if they can help with this problem
 

http://www.techspot.com/community/topics/computer-very-slow-choppy-video-and-audio-playback-from-browsers.207159/
Relevancy 17.2%

I ll try slow respond are Programs to to explain this the best I can A computer that I have not the one listed in any Programs are slow to respond of my sigs is having a little issue Programs are slow to respond Sometimes Programs are slow to respond when I turn on the computer I will open up a program the program will open but it s like it opens in slow motion as the program opens you see it slowly go into its open state You actually see it opening I know you can always somewhat see a program open but this is like it is in slow motion It does this for all the programs that I open and close This will actually go away later or sometimes if I restart it When I go into the bios the bios is very choppy It is an ASRock board and when I contacted them they said to reset the bios When I did it helped but now it is doing it again I have reset the bios again and it helped again the other day but now it is doing it again Does this sound like a bios problem Does anyone seem to know I don t know how else I could explain what is happening It is an ASRock Z Pro AMD XFX Vid card GSkill ripjaws memory Xeon E - V Corsair TX PSU Windows Pro nbsp

A:Programs are slow to respond

Slower response indicates the issue of bad memory allocation which is related with multitasking.
 

http://www.techspot.com/community/topics/programs-are-slow-to-respond.206144/
Relevancy 19.35%

My Asus DRW 24B1ST CD/DVD-Rom device works in Dos (bootCD works no problems), and is recognized by my WinXP Device Manager and listed as working properly. But when I try to run or view a disk from My Computer, all I get is a blank window. The window has the correct partition/drive identity, so I know it's pointing to the device, but it just won't interact with the disk.

The same device was working fine in a previous WinXP installation on the same computer, but when I installed another WinXP sp2 (I had lost access to the original installation) I had a few glitches and this is the remaining one that needs to be fixed.

BTW, I can bootup from a bootCD and run a miniXP and have no problem with the CD/DVD-ROM device, so the issue must be with the current WinXP installation.

Any suggestions for repairing this problem?
 

A:CD-ROM device won't open or run disk

Wow very interesting. Yo had mentioned it will boot to disc, have you tried while in safe mode. So if you restart computer and utilize the function f8 button go to safe mode with networking check to see if it works in there. If it does then I assume it is driver related issue. Of course in safe mode it loads minimum drivers to have a functioning safe environment. Even though windows recognizes it in device manager does not mean it has a working driver. I would even go as far as uninstalling the driver and reinstalling one from the manufactures website. You could first try uninstalling the driver then rebooting the computer then letting windows reinstalling the driver upon boot up to see if that fixes it first. Hope this helps let me know what you find.
 

http://www.techspot.com/community/topics/cd-rom-device-wont-open-or-run-disk.206972/
Relevancy 17.63%

I was watching a tv show on nbc on my dell inspirion when I lost Wi-Fi. I checked and I had no signal and it wasn't even showing any available networks. I called dell and they ran me through a diagnostics. But once they saw my McAfee was expired and I wasn't paying extra for tech support they wouldn't help. Now it's not even showing Wi-Fi in my network connections just Ethernet. Please help
 

A:No Wi-Fi listed in network settings

IMO, McAffee isn't worth $$; ditch it and get WiFi running again.

THEN, choose { Avast or AVG } as your A/V product, DL & install.
 

http://www.techspot.com/community/topics/no-wi-fi-listed-in-network-settings.206899/
Relevancy 18.06%

Hi Guys,
Recently my laptop keeps disconnecting from the wi-fi and I get an error saying unidentified network, I try to troubleshoot, it tries to reset the wireless network adapter and then the computer freezes. After I reset the laptop the problem can happen again within a couple of minutes. The driver software is fully up to date and I have no idea what else I can do. It is an Acer Aspire 5750G running Windows 7. Please help it's making my laptop almost completely unusable
 

A:Unidentified Network

Have you tried a wired connection does that work any better?
 

http://www.techspot.com/community/topics/unidentified-network.206848/
Relevancy 16.77%

I bought a ADSL Modem D-Link 2730U

We are connecting to the Modem via Laptop, PC, Phone,... at the same time.

I want to know how can I monitor network(Receive/Send) for each user who connected to the Modem.

Can I do such thing?
 

http://www.techspot.com/community/topics/monitoring-network-for-each-user-connected-to-adsl-router-modem.206910/
Relevancy 17.63%

My wireless is not working on my computer, just a couple months ago I reset my computer using the ISO file, now my computer will only connect to the Ethernet cable. The wireless switch is on. I see a button near the VAIO button that shows a computer with signals coming off of it, I've tried pressing it but it doesn't do anything. Computer specs: VAIO Song Laptop with 6 GB Ram and 1 TB HDD.
 

A:Wireless network not working

Sounds like when you reset your computer the proper wireless drivers were not re-installed. I would start looking for a solution for this. What Operating System does it have (Windows 7 / Windows 8.1/ etc.)? Have you tried to remove the Wireless drivers and re-install those? How about downloading and installing updated drivers from the VAIO website?
 

http://www.techspot.com/community/topics/wireless-network-not-working.206511/
Relevancy 17.63%

Hi. This is my first post on this forum.

I would like to ask some help regarding a problem with my internet connection. Connecting our separate PC and my Laptop to my LAN works perfectly fine but when I use our wireless network to connect my laptop and phone, that's when the problem occurs. I tried rebooting the router (unplugging the power switch, cables and such). And I also tried rebooting my phone and laptop but nothing works. I also tried looking at the router settings and tried changing the security settings to none to see if I can connect but still cant.
I just don't know what the problem is. Can you help me?
Thank you.
 

A:Can connect to LAN but not on wireless network

Hey strings12. A bit more info on your equipment would be helpful.
1) What is the OS (Operating System) and Service Pack Level of your laptop, SP1,2,3 ?. rIght click on My Computer icon and select Properties
2) Are we talking about one laptop here?
3)Is your router secured and what encryption method are you using, WEP,WPA or WPA2
 

http://www.techspot.com/community/topics/can-connect-to-lan-but-not-on-wireless-network.198872/
Relevancy 17.2%

Randomly, about 2-3 weeks ago my computer began to run slowly. If I'm just browsing the internet or using word documents and things like that it is fine and I cannot tell. The problem lies in things like playing games or running programs like itunes. I checked for all virus/malware, and there was nothing that I could see. I did a defrag and cleaned/cleared the registry and temp folder. Does this sound like it could be a hardware or driver problem? If its not a virus, could you give me a few other reason a computer would start doing this randomly.
 

A:Computer runs slow

Overheating? What are the computers specs?
 

http://www.techspot.com/community/topics/computer-runs-slow.179236/
Relevancy 16.77%

My internet started to become slow out of no where and I didn't mess with my router/modem or any computer settings so I'm guessing it's a hardware problem. Pages take a while to load, some don't load (Unable to connect to webpage message), or sometimes they won't load completely. I've had this happen 3 times over the past years, even with different routers/modems/ISP's, my internet would be working normally for a few months and then it'd dramatically get slower. I've always thought it was my router causing the problems, potentially screwing up and degrading my modem's performance. It must be that Netgear routers are awful, as that's the only brand of routers I've had over the years.

I'm on my desktop, and have my modem connected to my router. I'm connected to the internet via cable since my desktop doesn't have WiFi.
Got 58mb/s download speed and 12mb/s upload speed on speedtest. Any ideas on how to fix the problem?

Edit: I have the same problem with every browser if you're wondering.
 

A:Internet suddenly slow and pages not loading completely

Have you tried having your ISP run a line check.
 

http://www.techspot.com/community/topics/internet-suddenly-slow-and-pages-not-loading-completely.206046/
Relevancy 16.77%

Hi I'm not a tech-y person so I'm just hoping that someone can help me.

I recently bought a new laptop it's a Lenovo G40
System:

Intel Core i5-4210U CPU @ 1.70GHz 2.40 GHz
RAM: 4.00GB
64-bit Operating System
Windows 8.1 Single Language
I got home, downloaded and installed Firefox for me to use as my default browser. I got to use it for awhile (about 3 hrs) then I tried going on Facebook and it was taking too long to load. Then I tried it on my phone, it loaded faster than on my laptop. I tried searching (on both devices) random stuff on google (e.g. Miley Cyrus) and it took my laptop about 3 mins to load and my phone only took less than a minute to load. I did a speedtest on my laptop and I got 3.4mbps as a result (that's fast enough right?).

I really hope someone could help me with this because I'm currently student and I have a lot of requirements to do and I can't do that without a laptop and internet.
 

A:Slow internet on laptop but fast on phone

So, all 3 are on WiFi. Can you run a test with either of the laptops connected with an Ethernet cable and let us know the results? I suspect your wireless router has 802.11N, and that your phone supports it but your PCs only support 802.11G. 802.11N and G don't always play nicely together, and no 802.11G implementations is ever going to deliver 49Mbps of application layer throughput.
 

http://www.techspot.com/community/topics/slow-internet-on-laptop-but-fast-on-phone.205723/
Relevancy 17.2%

I m been having some network problems and I m really not sure to make of any of them Networking was never my strong point but I ve done everything I m capable of to try and diagnose and fix this problem So I have comcast and use my own router The last router I had was a netgear and needed replaced because it would restart itself randomly multiple times a day and I d be without internet for about - minutes at a time Instead network wireless Help connection diagnosing problems of trying constantly to fix it I just bought a linksys C to replace it with This problem started happening a little over a month ago and it manifests is self differently every time and the symptoms just don t at up in any logical way before I go out and buy a new router I want to ask you guys Obviously I get disconnected for about a minute at a time but Help diagnosing wireless network connection problems I also have long periods of just EXTREMELY slow internet Help diagnosing wireless network connection problems speeds I m talking mbps down to less than mbps The odd part comes in when I do a speed test during one of these drops in speed The speed test says I m getting all mbps of my connection but the youtube video I ll be watching will need to buffer Pages will also load very slowly but not all of them Techspot Youtube and Outlook all take forever to load during these slow downs but others will load just fine I can t figure out if this is the router or comcast It problem seems like it is a router problem because of me getting disconnected from my router but during these slow downs I can still access my router just fine and my internet speed will be displayed correctly I only have one computer connected to wifi so I can t test other machines What do you guys make of this Also what are some tests I can run to help diagnose this problem I m at wits end about this whole thing The disconnects seems to have stopped when I changed channels in my router to channel but I m still having this severe slow down issue Also as a side note I recently upgraded to xfinity and it came with a new modem These slowdowns have been occurring on both modems which leads me to believe it is the router Here is what I ve tried doing so far gt upgrading firmware gt changing ethernet cables gt changing modems gt changing wireless cards gt adjusting channels gt using different types of security WEP MAC WPA gt reinstalling windows gt using different browsers nbsp

http://www.techspot.com/community/topics/help-diagnosing-wireless-network-connection-problems.204969/
Relevancy 17.2%

Here again since I have the most weird problem ever which I have never seen nor heard of before. I recently upgraded the OS on a friends computer, from Vista to 7. However now I can't seem to get the onboard ethernet adapter to work, it can't be seen in device manager nor anywhere else. I have tried to reset the bios (by removing the cmos battery) and I have also checked that the network adapter is set to 'Enabled'. Also, when I connect the cable to the ethernet port no lights go on, it doesn't give any sort of hope what so ever. The cable is ok, the "modem" is ok, and everything else seems to be in order and yet it doesn't work.

Computer in question:
HP Pavilion 6530sc
Non-default GPU and added 1Gb RAM
 

A:Solved: Computer doesn't recognize the network adapter

Whenever you install a new OS, always take note of the model of core system hardware like GPU, chipset, and ethernet/wifi (there are a few others that aren't as important, but nice to have updated) since those are critical to your computers core functionality.

However, a quick google search of your model yielded me with your PC's system specs. Your PC contains a Realtek RTL8201N ethernet adapter. So far I am unable to find a driver from Realtek itself and the HP driver is not Realtek, but instead nVidia nForce.

So after a bit of searching, I came across this: it seems to me that you have an old chipset from nVidia. I am not completely sure, but I think you have an ION chipset. Try installing this ION chipset driver (64 bit) ==OR== this ION chipset driver (32 bit) and tell me if it works. It should include the necessary component drivers and if it works, it means you have an ION chipset like I suspected.

Here are the specifications for your PC BTW.
 

http://www.techspot.com/community/topics/solved-computer-doesnt-recognize-the-network-adapter.204750/
Relevancy 16.77%

Hey all! I've been facing this problem for quite a long time even after upgrading my RAM. The problem is that on specific sites like Facebook, Dailymotion, etc, the audio playback is quite fine but the video playback is slow, laggy, choppy etc. Is it my computer's problem? Well, my graphics is quite low. By quite low, I mean only 32MB. I don't face this problem on Youtube and players like JW players(I guess) which is used in some sites.

Any ideas or suggestions?

Thanks.
Amal
 

A:Slow video playback on specific sites

Yeah it's probably you GPU, try viewing the videos in lower quality.
 

http://www.techspot.com/community/topics/slow-video-playback-on-specific-sites.203738/
Relevancy 17.63%

Sorry for that long title. Anyway, I was watching some YouTube videos when my wi-fi suddenly stopped worked. With this, I don't mean that I'm not catching signal from my router. I mean that my computer isn't receiving signal from any network. I don't know anyway to fix this, it never happened. I also won't buy a new computer. I got this on Christmas and I think that 7 months isn't that old. Also, the only tutorial I found doesn't applies to my computer (It was for a mac ). I have no idea of how to fix this and if you know, PLEASE HELP ME!!!!!! (If you are curious of how I am posting this, it works with Ethernet connection)
It's an ASUS computer with Windows 8.
 

A:My Computer Isn't getting signal from any Wi-Fi Network

Give the following a try and see if it helps:
Go to network sharing center - change adapter setting - click on wifi and then Diagnose this connection.

If this does not help, please let us know and we can suggest something else to try.
 

http://www.techspot.com/community/topics/my-computer-isnt-getting-signal-from-any-wi-fi-network.203822/
Relevancy 16.77%

I have an ancient eMachines T- Intel P- Ghz single core Prescott I m running XP-SP fully updated with the exception of SP- If I install SP I lose the ability to do a repair install My AV product is AVG Free This thing s Loading Firefox Page with Slow my Slow Page Loading with Firefox go to erotica finder Trust me I don t log in to my bank with it Anyway it seems terribly slow at loading pages with the CPU at or pushing usage I can t load more than one page at a time Slow Page Loading with Firefox or I get a quot problem server reset before page loaded quot type error Once the other page s have loaded a simple reload page command establishes the connection Firkefox Slow Page Loading with Firefox ver is the browser of choice with quot NoScript quot installed I just did a repair install of the OS which is the only way I could get it to reload the internet driver Intel Pro That doesn t seem to have helped My question is I want anybody s best opinion as to whether this level of performance is what I should expect as typical with this rig or is it just plain worn out and I should retire it with full military honors nbsp

A:Slow Page Loading with Firefox

Try disabling no script. That may be eating up all your resources and slowing down the loading of webpages. If that doesnt work, try another browser like Chrome. I would try completely clean installing windows rather than repairing it since just repairing will not clear anything such as viruses off of the PC. Malware could be another culprit and clean installation will allow you to wipe it out.
 

http://www.techspot.com/community/topics/slow-page-loading-with-firefox.202610/
Relevancy 17.2%

I have a HP 650 notebook that is in ok condition with Windows 8 OS. It uses a Ralink 3290 wireless adapter for my wi-fi needs. For the past three months, my adapter has been vanishing! I look at the indicator in my bar, and it shows no device available. I open up the Network and sharing Center and select the change adapter settings, and the only thing showing is an ethernet connection that I don't use. I can sometimes get the adapter to return by using the find and fix devices option on the search menu, but sometimes even that doesn't work. I've even been getting the "This device cannot find enough free resources (code 12)" message for the Ralink PCIe from the troubleshooter. while I did see an article on this elsewhere, I had some trouble understanding it. Can anyone help me figure out why this is happening to my laptop? Thanks for any help you can provide.
 

A:Vanishing Network adapter and resuorce problem

You might need to update and install the laptops chipset drivers. And also try to update the driver for your wireless adapter from the manufactures site or from the HP support page.
 

http://www.techspot.com/community/topics/vanishing-network-adapter-and-resuorce-problem.203293/
Relevancy 16.77%

I have an internet connection that I have extended to my Brother in law's house, next door. At the moment, I basically have two LAN cables coming out of my modem/router, one going to my computer and another, extended cable, going to his computer.
However, he wants to use his spare modem/router, which has wifi capability, to allow his son to use his own computer downstair with only wifi.
Therefore, will there be any conflicts if I simply splice in a Lan cable or add a lan socket for the second modem/router (wifi location.) at the appropriate point along Lan cable 2? See diagram below.
If there is a possibility of conflict what would be an alternate wiring method?

Thanks,
Tom.
 

A:Adding extra wifi (modem/router) to my already extended network

Good drawing and this will work just fine. In fact, that's what I use to get access at the far end of the house. Here's the trick;

router#1(lan slot) ---- (lan slot) router#2 with wifi​
Notice that #2 WAN slot is left empty! This places all systems on the same subnet of the router#1 {what you are doing is making router#2 act like a switch which has wifi support (y) }

* Give router# a unique LAN address (If #1 is 192.168.1.1, then make #2 192.168.1.1) This will allow each to be manage via a browser connection
* in router#2 disable DHCP. This forces #1 to be the manager of the entire network and it will handout all IP addresses
Personally, I use the MAC addresses of my devices to enable router#1 to use Address Reservation of IP address for all devices attached to #1 (ie I map the devices to the range 1.2-> 1.10)

Then set the DHCP range in #1 to 1.100-1.50
These will be used for all devices attached (wired or wifi) to #2

Optional:
All systems can then use the firewall to allow or deny access for one or both halves of the network. EG: I permit access for 1-10 and 255 while denying 100-254​ALL system must allow the top-end address 255 as that is the broadcast address that is used to hand out the DHCP data.
 

http://www.techspot.com/community/topics/adding-extra-wifi-modem-router-to-my-already-extended-network.203204/
Relevancy 41.71%

I am in an office building with 40 or so tenants. The entire building is wired to one central network (let's call it main network) controlled by SonicWall where each office has one live network drop. The main network is set up in such a way that tenants can plug in their own switches and routers if they want more network connected devices in their office. The office building has a network printer connected to main network where tenants can print to it. However, when tenants have their own routers in their office you cannot really connect to the network printer that is connected to main network. Is there something I can port, bridge or set-up where they can print to it?
 

A:Printing to network printer on another network

I think that as long as the tenant's router is connected to the main network they should still be able to access that printer provided that the WAN IP address of their routers is within the IP range of the main network where the Network printer is attached.
 

http://www.techspot.com/community/topics/printing-to-network-printer-on-another-network.203071/
Relevancy 21.07%

As the title says I'm trying to connect my HP3050 printer to my computer wirelessly. Problem is I get this:


The story goes that in the past week or so we swapped to a different internet provider and have swapped out the old modem/router for one that the new company has provided.
Prior to this no problems at all.

How do I counter this, I.e. remove the problem of what appears to be the availability of two routers, the new and the old?

Thanks,
Tom.
 

http://www.techspot.com/community/topics/unable-to-connect-my-hp3050-printer-wirelessly.202822/
Relevancy 17.2%

Greetings my fellow technologists I have routers and internet connection and want to set up a second wireless network using the Dual 1 Internet Creation with connection Network DDWRT same internet connection for VPN purposes The routers are Router A TPLink TL-WR N non DD WRT flashed Router B Linksys E DD WRT flashed Router A is connected directly to my company s network and works fine broadcasting DDWRT Dual Network Creation with 1 Internet connection its own wireless network BENMAO BENMAO s Router A configuration settings are below LAN IP LAN MAC BC-D - - - - A WAN MAC SAME WAN IP WAN SUBNET WAN GATEWAY WAN DNS I have connected Router B to Router A via Ethernet cable Port on Router A to INTERNET port on DDWRT Router B but get no internet access on Router B using DHCP with Automatic settings I am willing to change any settings and experiment to produce connectivity on the second network BENMAOVPN but don t know what to change in the protocol settings and there is very little information on Internet DDWRT forums It seems there are multiple DHCP DNS and IP conflict issues which I don t really have a good grasp of here The DDWRT router Router B is highly customizable but I admit I don t know whether to set is as an Access Point Client Bridge Bridge Repeater or Ad Hoc but I know I do NOT want to quot cascade quot the routers into wireless network Also Router B probably needs to be set to function as a Router rather than a Gateway When I replace Router A with Router B its just plug and play everything works fine and I can actually put all my devices on a wireless VPN so setting up the wireless VPN is not the issue its just getting Router B to accept the signal from Router A So bottom line is I need to know how to set Routers A amp B to share the Internet signal from Router A to Router B and then have Router B broadcasting a DIFFERENT network Thanks for any help in advance nbsp

http://www.techspot.com/community/topics/ddwrt-dual-network-creation-with-1-internet-connection.202411/
Relevancy 21.07%

My dad was putting some paper into his printer and had apparently put the paper in too far. When he tried to print something it jammed up and the printer had abruptly shut off. I have tried leaving it unplugged for a while and plugging it back in however, the printer WILL NOT turn back on at all.
 

http://www.techspot.com/community/topics/dell-3510-printer-issue.202348/
Relevancy 19.35%

Hi,

I'm hoping someone will be kind enough to help with a problem. I am connected to my internet network on my PC through an Ethernet cable, but cannot access the internet through a browser or anything else. This is the second time this week this has happened. I had a separate PC issue early this week which caused me to reinstall windows. I have had the issue with connecting to the internet occur twice now since reinstalling windows, both times after installing windows updates. I resolved the first occur acne by having my ISP come out. I do not know what they did to fix the problem, only that the router was not the source, and he changed something while logged into the modem settings. Any help would be appreciated.
 

A:Cannot open web page, connected to router

First get a command prompt and then issue these to commands
ping 8.8.8.8
nslookup www.google.com

both should give some answers, neither should timeout or show errors
 

http://www.techspot.com/community/topics/cannot-open-web-page-connected-to-router.202181/
Relevancy 17.63%

Hello, totally noob to phone networks. I am going to have a US version of Galaxy S5 and order an extra battery for it on mpj. Can I use both of them on overseas carriers? Thank you for any kindly help.
 

A:Can I use my phone on overseas network?

The specs shown here declare

Also known as Samsung GS 5
Available as:
Samsung SM-G900F - for Europe
Samsung SM-G900I - for Asia
Samsung SM-G900K/G900L/G900S - for Korea
Samsung SM-G900M - for Vodafone
Samsung SM-G900A - for AT&T
Samsung SM-G900T - for T-Mobile
Samsung SM-G900V - for Verizon
Samsung SM-G900R4 - for US Cellular
Samsung SM-G900P - for Sprint
​General 2G Network GSM 850 / 900 / 1800 / 1900


So yes, it is compatible with EU providers. Caution however; your current provider will bill you for roaming charges. When in Europe, I always buy a local SIM card and fund it with enough credit to last the trip - - that will also give you a local phone number. If you book theater events or need to call for reservations, they will be more likely to answer the phone.
 

http://www.techspot.com/community/topics/can-i-use-my-phone-on-overseas-network.201690/
Relevancy 16.77%

Hi All,

I have WD 1 TB passport, and all its operations are very very slow.
I cant use it at all. I have all the important documents in it.
Please someone help me out here.

Regards,
Sanoop.
 

A:WD hard disk all operations very slow

The only thing I can really recommend is to defragment the external HDD using a program such as Defraggler.

If that doesnt help, you may have a virus on the HDD, in that case, I would recommend posting in the malware forums.
 

http://www.techspot.com/community/topics/wd-hard-disk-all-operations-very-slow.201315/
Relevancy 33.54%

I ve read all I can about this online and tried everything I ve come across Since upgrading my internet same ISP the upload on my computer not any others on the network It ranges from megabits to If I boot into linux I get but that s far from the megabits the other Slow Problem: Bizzare Infuriating Upload Network computers on the network get But the strange thing is the problem seems to affect only certain programs My browsers are affected as the internet tests I do are from the browser OBS streaming software will not upload more then megabits about k However utorrent can completely max out my upload I ve tried stopping the WMI service and Bizzare Infuriating Network Problem: Slow Upload I have no traffic shaping software installed Here are my specs Operating System Windows Pro -bit CPU Intel Core i K GHz C Haswell nm Technology RAM GB Dual-Channel DDR MHz - - - Motherboard MSI Z -GD GAMING MS- SOCKET C Graphics SyncMaster x Hz LG TV x Hz MB NVIDIA GeForce GTX Gigabyte C Storage GB Samsung SSD EVO GB SSD C GB SanDisk SDSSDHP G SSD C GB TOSHIBA DT ACA SATA C GB Seagate Bizzare Infuriating Network Problem: Slow Upload ST DL - VT SATA C Optical Drives PIONEER DVD-RW DVR- L Audio ASUS Xonar DGX Audio Device Various Network info You are connected to the internet Connected through Killer e Gigabit Ethernet Controller NDIS IP Address Subnet mask Gateway server Preferred DNS server DHCP Enabled DHCP server External IP Address Adapter Type Ethernet NetBIOS over TCP IP Enabled via DHCP NETBIOS Node Type Hybrid node Link Speed Bps Computer Name NetBIOS Name CALVINS-PC DNS Name Calvins-PC Membership Part of workgroup Workgroup WORKGROUP Remote Desktop Disabled Console State Active Domain Calvins-PC WinInet Info LAN Connection Local system uses a local area network to connect to the Internet Local system has RAS to connect to the Internet Wi-Fi Info Wi-Fi not enabled WinHTTPInfo WinHTTPSessionProxyType No proxy Session Proxy Session Proxy Bypass Connect Retries Connect Timeout ms HTTP Version HTTP Max Connects Per Servers INFINITE Max Connects Per Servers INFINITE Max HTTP automatic redirects Max HTTP status continue Send Timeout ms IEProxy Auto Detect Yes IEProxy Auto Config IEProxy IEProxy Bypass Default Proxy Config Access Type No proxy Default Config Proxy Default Config Proxy Bypass Sharing and Discovery Network Discovery Enabled File and Printer Sharing Enabled File and printer sharing service Enabled Simple File Sharing Enabled Administrative Shares Enabled Network access Sharing and security model for local accounts Classic - local users authenticate as themselves Adapters List Killer e Gigabit Ethernet Controller NDIS Connection-specific DNS Suffix Home Connection Name Ethernet NetBIOS over TCPIP Yes DHCP enabled Yes MAC Address D - D- E-F - B- IP Address Subnet mask Gateway server DHCP DNS Server Network Shares Misc D Misc Finished Torrents D Downloads Finished Torrents Games D Games Games E Games Torrents E Downloads Torrents Video D Video Video E Video Current TCP Connections C Program Files x Google Chrome Application chrome exe C Program Files x NVIDIA Corporation Update Core NvBackend exe C Program Files Box Sync BoxSync exe C Program Files Hola app hola exe C Users Calvin AppData Roaming uTorrent uTorrent exe C Windows Explorer EXE G Program Files x Nightly firefox exe G Program Files x Razer Razer Game Booster main exe G Program Files x Samsung Magician Samsung Magician exe G Steam Steam exe hola svc exe hola updater exe KillerService exe lsass exe NvNetworkService exe nvstreamsvc exe services exe svchost exe svchost exe svchost exe System Process System Process wininit exe nbsp

A:Bizzare Infuriating Network Problem: Slow Upload

I figured it out, the Killer NIC on my Z87GD65 mobo was not compatible with NetLimiter. Uninstalling it fixed the problem
 

http://www.techspot.com/community/topics/bizzare-infuriating-network-problem-slow-upload.201410/
Relevancy 17.2%

Hello, I'm new here. I'm trying to fix my sons Asus laptop. it won't connect wirelessly but will connect via ethernet cable. device manager has exclamation point beside network controller. I cannot download drivers for it. can you help?
 

A:Asus X53E network controller issue/no wireless

"I cannot download drivers for it"... Why? Can you get the driver from here:
http://support.asus.com/download.aspx?SLanguage=en&p=3&s=114&m=X53E&os=&hashedid=mDFYFQWEpTitMwA6
If the driver won't install, the Wifi card may be bad... Something that doesn't happen very often
 

http://www.techspot.com/community/topics/asus-x53e-network-controller-issue-no-wireless.201175/
Relevancy 16.77%

When I play windows media player or any other mp3 player my pc begins to slow down a lot and mouse stutters and my internet webpage closes :/ any help please?

I've posted my IRQ
 

A:When I play music my PC starts to slow down and mouse stutters

What are your system specs?

Some possible solutions: Make sure Windows is up to date. Try updating your sound driver (post your system specs and I will show you how to).
 

http://www.techspot.com/community/topics/when-i-play-music-my-pc-starts-to-slow-down-and-mouse-stutters.200950/
Relevancy 17.2%

We have a problem with the connection to our server. The server disconnects randomly from minutes to hours all day. I am at a remote location and connect via logmein to a local pc at the servers physical location to remotely control and connect to the server. A month or so ago the connection would drop every few minutes. The staff at that location replaced the switch and had the ISP tech check out the router. No problems were found. I think it is a problem with the server itself but don't know what it could be. Typically I can go through the login process and reconnect. I'm sorry I can't be more specific about the equipment since it is 40 miles away. Any suggestions on troubleshooting? Remotely?
Clearly I'm not a network guy.
Thanks for any help or direction
 

A:Network connection to server disconnects constantly

The usual suspects are:

(for DSL connections only) missing or faulty line filters
need to update the router/modem firmware at your end
packet reassembly overflow(a)
(a) very techie, but the solution is easy; see this description
 

http://www.techspot.com/community/topics/network-connection-to-server-disconnects-constantly.200706/
Relevancy 17.63%

When I am accessing wifi network I get dns failed error message. what is the problem? pls help
 

A:DNS failed error in WiFi network

Can you connect using a wired connection?
Get a command prompt and enter
ipconfig /all >myTCP.txt​then open that file, copy the contents and paste into your follow-up
 

http://www.techspot.com/community/topics/dns-failed-error-in-wifi-network.200577/
Relevancy 20.21%

I have a Xerox Phaser 3117 Laser Black and White Printer. When print, half of the paper come out to the out-put tray. Other half still in the fuser unit. Stop printing and red light indicate. When I check the print out, all details have printed. But, first row of my details have moved very top of my A4 paper.( Whole document moved 2-3 inches above[to the top of the paper]. What is this and how to resolve this problems( Paper Jam and document move to top of the sheet)????
 

A:Xerox Phaser 3117 laser black and white printer problem

chathura said:





I have a Xerox Phaser 3117 Laser Black and White Printer. When print, half of the paper come out to the out-put tray. Other half still in the fuser unit. Stop printing and red light indicate. When I check the print out, all details have printed. But, first row of my details have moved very top of my A4 paper.( Whole document moved 2-3 inches above[to the top of the paper]. What is this and how to resolve this problems( Paper Jam and document move to top of the sheet)????Click to expand...

what can I do
 

http://www.techspot.com/community/topics/xerox-phaser-3117-laser-black-and-white-printer-problem.196151/
Relevancy 21.5%

On a home network. My computer runs Windows 7 and this is the printer. I've never done this, but I would like to do it on my own (as much as possible ); I ant to learn how to set up network and share devices on it. If there's a tutorial somewhere about this, I would appreciate it very much.

Thanks fellas
 

A:Help me share the printer

What you are probably wanting is a wireless router. The printer is wireless (Wi-Fi (802.11 b/g/n )). Once the printer is connected to the wireless network, anyone on the network whether wired or wireless will have access. The reason I suggest a wireless router is more possibilities than simply the printer, and the assumption that you don't currently have a network.

If you are already connected to a network and are using the USB 2.0 connectivity, all you would need to do is share the printer within printer properties. This would allow anyone on the network to see and use the device.

Which of the two directions would you like to adventure into? What exactly do you have to work with at the moment, or are you planning on purchasing network gear?
 

http://www.techspot.com/community/topics/help-me-share-the-printer.200244/
Relevancy 18.92%

We have a new Dell Precision laptop but cannot get two of our USB flash drives (both Lexar Jumpdrive SecureII Plus) to work. They work on our other computers. We can connect other USB devices to the new laptop, including an older flash drive. Strangely, if the problem drives are plugged in before the computer starts they will open properly - but I cannot remove them and plug them in again later.

They do beep every so often. USB Mass Storage shows up in Device Manager, with the warning exclamation. Disk Management will briefly show a disk (1 or 2) with "no media"; sometimes it will disappear then reappear for a second or so.

I have checked for USB driver updates, uninstalled and reinstalled USB hubs shown in Device Manager (though I'm plugging directly into the side of the laptop). I do not understand what would cause these drives only to not work with this computer only.
 

A:Some usbs drive fail to open on newest computer only

I forgot to mention: the laptop is running Windows 7 Pro.
 

http://www.techspot.com/community/topics/some-usbs-drive-fail-to-open-on-newest-computer-only.199812/
Relevancy 17.2%

Hello. I am a complete newbie to server administration. At my current job, I have been tasked with setting up a deployment server. The server is a Windows 2008 server and is not connected to the Internet. The server is a domain controller on its own domain (different from the main domain my job uses). How would I connect this server to the Internet without disrupting other users on the network? By disrupting, I mean connecting to my server instead of the main server for DNS and DHCP. The server has Active Directory Domain Services, DNS, DHCP, and WDS roles set-up.
 

http://www.techspot.com/community/topics/connect-server-to-the-internet-without-disrupting-other-computers-on-network.200167/
Relevancy 17.2%

Recently my network storage device has stopped me from accessing folders with the exception of music. All my pictures for the last 11 years are on it and not backed up anywhere else. Cannot find manual and have done reset but cannot remember URL to setup or admin username and password. Doesn't seem to be online and Edge is giving me no help whatsoever.
 

A:Edge DiskGo 3.5" network harddrive

Ouch if this is a NAS Device or has an IP you can use an app called FIng for your mobile device to find its ip so you can put it in the browser and get to the gui site. If you cant try fing you can use angry ip scanner for winwdows to find its ip.

If you want to try and recover files I would try recuva to obtain any data that has been lost. I am not sure if it is lost or just changed in the mapping.

As most guys will tell you here its very good idea to have three forms of back up. Local, external and online. If you don t know how to use fing or any of the software I duscusses please let me know. I will have links to the downloads below. Goodluck.

http://angryip.org/w/Download
For Fing just type in Fing in either google play or Itunes.
For Recuva: http://www.piriform.com/recuva/download/standard
 

http://www.techspot.com/community/topics/edge-diskgo-3-5-network-harddrive.200015/
Relevancy 17.63%

Hi I m having a problem that I gather is fairly common with Windows machines but I haven t been able to find the same case in other threads nor a workable solution among similar cases I have two Windows computers the main laptop on Win and a hybrid tablet on Win I would like drive Win8.1 Trying connect to network to a for both devices to be able to access each other via my home network So for both devices I ve set the network settings to home private I turned on file sharing and discovery and even joined both devices to the same homegroup The end result is that my Win tablet can access my Win laptop both through the homegroup and through direct network access The problem is that my Win laptop cannot do either of those with regard to the tablet in all Trying to connect to a Win8.1 network drive cases I get the network error message that I cannot access the location and should check it for spelling To try to solve this issue I have attempted -Turning off the Windows firewall on my Win tablet -Looking around to see if I could find my Win tablet to unwittingly belong to some sort of domain have not been able to figure that out The odd thing is that I also tried to test out the network by setting up iTunes on both devices and setting them to share their music libraries via home share and sure enough both devices could access each other s libraries Similarly I was able to access my tablet from my Win laptop through a Remote Assistance invitation Would very much appreciate any advice I can get here Thanks in advance nbsp

A:Trying to connect to a Win8.1 network drive

Which Windows 8.1 tablet is this Pro or RT? RT your can't not x86 or x64. Pro you can. Disable Homegroup. Use Workgroup and call it something other than Workgroup like: DANET for example
So do this on laptop and tablet. On laptop make sure the folder is shared out to you the admin or your name example Dan.

So you should have local account on your system called Dan with admin rights. Back on the tablet side you need to create a local account. Did you setup Microsoft account so your login with that account only. You need to create a local account and start using that. It can be done to access the Microsoft account while being on local account while your at home.

If away from home then sign on to Microsoft account to access the cloud features. Or still use the local account and have Microsoft account to access store and skydrive (aka onedrive).
 

http://www.techspot.com/community/topics/trying-to-connect-to-a-win8-1-network-drive.199866/
Relevancy 17.2%

Hello Everyone !
Right now I am using a broadband connection as my Internet connection and I have a dsl modem which is wi-fi capable. Two of my frnds share the same Internet connection through wi-fi. The problem is whenever any of us watching YouTube videos or downloading something, the whole speed is consumed by that particular computer. I know that many new modems have the capability to limit the bandwidth usage these days but mine is an older one. So I was wondering if there is any way I can limit the bandwidth for each computer.
Thanks !
 

A:How to limit the bandwidth for each computer on a wireless network?

You have to have a modem you can log into an has that type of feature. If you are wired into the network, you should be able to limit the wireless bandwidth and keep your wired bandwidth up. Normally go into the modem, go to setting and wireless setting to limit it.
 

http://www.techspot.com/community/topics/how-to-limit-the-bandwidth-for-each-computer-on-a-wireless-network.193175/
Relevancy 17.2%

So I have high speed internet, but I've recently discovered that when I use the wifi adapter on my desktop, (I have no direct ethernet where it is), the download speed is EXTREMELY slow.. and all videos are sluggish, my question is, can I tether my computer to my LAPTOP with the GOOD internet, for better speeds, using it like it was a wifi adapter?
 

A:Slow Internet

Please explain how your laptop is connected which results in fast Internet. And then explain why your PC does not have the same Internet connection. Both machines should have the same connection possibilities.

What you are describing is an Ad-Hoc Connection (then Internet Connection Sharing). But that is not what you want, if you can connect them both to the Internet independently. Even if you do make an Ad-Hoc Connection, you would likely be facing the same issue that made your connection slow to begin with.
 

http://www.techspot.com/community/topics/slow-internet.199559/
Relevancy 16.77%

Please I need your help I have Seagate SSHD hard disk model ST DX it is working fine but I can t use any too SSHD Seagate (ST2000DX001) is slow software from Seagate website the software are -Sea tools for windows when I use the software the software doesn t see my hard Seagate SSHD (ST2000DX001) is too slow disk it can only see Generic USB SD READER -download finder software again doesn t recognize the hard disk -Seagate Maxtor serial number locator again doesn t see my hard disk -Drive detect utility lt again doesn t see my hard disk When I go to device manager gt disk drive section I can see ST DX - CM SCSI disk device I already installed windows OS with all the windows updates internet security softwares -Please can I use disk defragmentation software with this hard disk The softwares I have for degragmentation -iolo system mechanics -Glarys utilities -Ashampoo win optimizer I use the defragmentation software one at a times please reply to this question as well another thing this hard drive is too slow like I have normal HDD it should be a lot faster than the normal HDD When I turn the pc on it took minute seconds to fully load to desktop but it took seconds when it turned off I watched a lot of clips in you tube about this SSHD I am not saying is bad but it should be faster I wrote one month ago to seagate technical support they don t bother to reply to my email what kind of technical support it that I have SATAII connection do you think shall I buy SATAIII card internal or upgrade the memory from GB to GB maximum the motherboard allow me I hope to hear from you very soon My kindest regards habib nbsp

A:Seagate SSHD (ST2000DX001) is too slow

habib,

What kind of PC is this you have installed the sshd into? make/model or if it's a custom system please give us the specs.
What version of windows are you running on this PC?

I personally wouldn't worry about running the software that came with the drive, sometimes utilities from the manufacturers can be worthless or do more harm than good.

Again, personally, I would NOT run any of those programs you say are for "defragmentation" None of those programs are designed for defragmentation, they are 3rd party utilities that are just going to needlessly scan your hard drive for crap that may or may not be there - they are unnecessary and I would not recommend running them. Not only are they not for designed for defragmentation, they are redundant, they all three supposedly do the same damn thing. Point being, don't install them, don't run them - that just my two cents, someone else may tell you differently, take it with a grain of salt.

read this http://en.wikipedia.org/wiki/Defragmentation so that you know what defragmentation is and have a better understanding of how it truly works.

Should you get a SATA3 card?! Probably not. http://en.wikipedia.org/wiki/Serial_ATA
SATA3 supports 600MB/s read/write speeds @ 6Gb/s.
SATA2 supports 300MB/s read/write speeds @ 3Gb/s.
That being stated, that is the theoretical limit of each type of connection. In a perfect world, with perfect conditions, you MIGHT get those kind of speeds. Not only that, but mechanical hard drives are NOT going to get even remotely close to the theoretical speeds of SATA2. The hard drive you have the average read/write speeds are: 156MB/s which is waaay lower than SATA2 and super lower than SATA3 specs. (see attached .pdf spec sheet, I have highlighted specs on your drive) A SSD (solid state drive) would come closer to the SATA3 specs for read/write speeds, for example the Samsung 840 EVO SSD has average read write speeds over 500MB/s.

So is this drive that much faster than your old drive? Not really, it has an 8GB nand flash memory cache onboard, which can improve speeds slightly, once windows has booted. The hard drive itself is smart enough to determine what files need to be placed into that cache, but it's still not going to make a big difference in the overall performance of the drive.

I hope my comments have helped. if you have further questions please post back. Take care!
 

http://www.techspot.com/community/topics/seagate-sshd-st2000dx001-is-too-slow.199472/
Relevancy 16.77%

I just got this computer about 2 weeks ago, and ALREADY I am getting lag problems. I have the CPU widget, and when I am JUST on the web browser, I get about 50-70 CPU being used. My specs are:
AMD Athlon(tm) 64 X2 Dual Core Processor 4400+
Nvidia GeForce GT 430
And if it helps, I AM using an external HDD for most of my programs, since the original PC came with only 250 GB.
 

A:Computer becoming extremely slow. It's brand new.

Which applications do you have installed to the external?
What connection type and speed is the external HDD?

I'm not sure I would install applications to a USB 2.0 drive. Especially if the applications are used frequently. I know I wouldn't if the application installs memory resident system monitors that run 24/7. However I usually disable these monitors from running at startup as well.
 

http://www.techspot.com/community/topics/computer-becoming-extremely-slow-its-brand-new.199474/
Relevancy 18.06%

Hi there Tech Forum thanks in advance for your help - I have a question about a LAN and stuff There is a modem and a wireless router with LAN ports In one of them there is conected also a switch Network LAN Question with LAN ports - Some weird things have been going on I always get a wireless connection so LAN Network Question no problem there Issues appear with the wired network On one hand I had many times an unidentified network a x x x ip and no LAN Network Question network Nothing changed in configuration on my box or the router and got to connect at MB s while if connected through wi fi I got LAN Network Question more than MB s From a moment on again unidentified network and no signal in the adapter a yellow light would blink quick So now after touching the cable and a little bit of despair not driven to the computer by the way I have a full conection by lan and by wi fi both at a good speed AND weird for me a green light on and the same yellow blinking - So main questions are - What does the green light ON not blinking means - Could there be a difference due to the cable manipulation - Is there a gost inside my router D Thanks a bunch to all of you I try my best to understand computers so now I am happy with the connection but curious on the rest - Regards nbsp

A:LAN Network Question

How new are these devices? Are you using new 'patch' cables? Is DHCP running on only one of the devices? Seems weird that "touching the cable" caused a change.

1. The LEDs differ, but usually one signifies a connection [on/off] and the second signifies activity [blinking]
 

http://www.techspot.com/community/topics/lan-network-question.199370/
Relevancy 17.2%

Hey I just bought a new
mb http://www.newegg.com/Product/Product.aspx?Item=N82E16813130709
processor http://www.newegg.com/Product/Product.aspx?Item=N82E16819113280
memory http://www.newegg.com/Product/Product.aspx?Item=N82E16820231428
video card http://www.newegg.com/Product/Product.aspx?Item=N82E16814130680

I did not replace my HDD and the are 3GB not 6 GB as this board supports but are SATA and I have nothing special starting up beside the basic items and AVG 2013 and magic ISO which I had all this on my old system. I am running windows 7 and it takes this machine almost 5 min to boot up it just sits at the windows display screen. I never overclocked anything but I thought this upgrade would be faster than my 4 year old system that this replaced, not slower! OK so any ideas? Would the 6GB SATA HDD drive make that much of a difference?
 

A:Slow (new) system

6GB HDD? Dude what, that's ancient.

Get a new HDD, or a cheap SSD - you'll really see it fly.
 

http://www.techspot.com/community/topics/slow-new-system.198644/
Relevancy 16.34%

Hello,

I have a Dell Latitude D620 laptop that I bought in 2006 and it runs EXTREMELY slow, whether I am on the Internet or just doing basic tasks in Windows or MS Office. It has Windows XP, some basic software (like MS Office), and only a few files (because the hard drive crashed last year, so I only put a few files back on it, after installing the new hard drive). I know it's relatively old, but is there ANYTHING I can do to increase the speed of the computer, without buying additional memory? Any help I can get with increasing the speed will be greatly appreciated.

Also, I don't know if this is a different issue, but sometimes the laptop seems to get too hot (at the bottom) after being on for too long.

Thanks in advance.
 

A:Dell laptop runs extremely slow - need help boosting speed

First, make sure your vents are clear of dust. Heat can cause all kinds of issues. Do you have a cooling pad?

Second, have you scanned for infections?
 

http://www.techspot.com/community/topics/dell-laptop-runs-extremely-slow-need-help-boosting-speed.167636/
Relevancy 18.92%

I am currently trying to open my laptop so I can clean the processor/graphic card due to over heating. Though I took off all the screws off and no part seems to open... I tried looking on youtube but the models are different. Can someone please help me out?
 

A:How to open an asus laptop - a75v model?

Similar Asus models might help you even though they are slightly different. You probably have missed a screw hidden in the hard drive or memory/wifi bays...
 

http://www.techspot.com/community/topics/how-to-open-an-asus-laptop-a75v-model.198868/
Relevancy 16.77%

I have multiple devices setup through the same connection. In the past the all got about 18mbps download. The other devices still get that but one device now maxes out between 35mbps. I haven't changed any hardware or software. It is a Windows 7 machine. Any ideas?
 

A:Why would one computer have a slow internet connection?

Are all wired?
 

http://www.techspot.com/community/topics/why-would-one-computer-have-a-slow-internet-connection.198453/
Relevancy 17.2%

A colleague at work would like to set up either a SHN or a SBN. What is the best way to go about this? Would it be best to be safe to be cloud based? What equipment is needed etc...?

This will take some discussing, so please ask any questions you need. The intention would be for two/three people to access the information on the network initially. A printer will be shared on the network, allowing scan to email. Laptops would be used to access the network from external sites, this is why I'm thinking of going the cloud based route, so they can log on and access the server from anywhere in the world...

Any help/guidance is appreciated.
Thank You!
 

A:Setting up a small home/business network

Yes, you can consider the Cloud as a solution for access, BUT . . .
it also brings with it issues like:

security
privacy
backup
ownership
You should start reading about these issues before committing to this solution.

One alternative would be a NAS device connected to your router. Putting your modem, router and NAS on a UPS power system would allow (with proper configuration) external access and you have total control, of all of the issues above.
 

http://www.techspot.com/community/topics/setting-up-a-small-home-business-network.198198/
Relevancy 16.77%

Hi,
I just got a new toshiba satellite C55-A5302 laptop and I immediately encountered a problem. The keyboard was not responding but I noticed that if I held down the key long enough then it owuld respond. I was wondering if this was a problem with the drives or if it was a factory defect or if there was any easy fix for it. Any help would be greatly appreciated.
 

A:Keyboard Problem - Extremely Slow Response TIme

DON'T void the warranty, send it back to get it fixed.
 

http://www.techspot.com/community/topics/keyboard-problem-extremely-slow-response-time.198232/
Relevancy 18.06%

I woke up this morning and my laptop is having trouble connecting to the internet However internet worked on other laptops and devices so it must be the laptpo s problems I Network Unidentified looked up the problem and I eventually get to a point where I figure out I need a new ip After typing ipconfig renew it says Windows IP Configuration No operation can be performed on Wireless Network Connection while it has its media disconnected An error occurred while renewing interface Wireless Network Connection Unidentified Network The sup port for the specified socket type does not exist in this address family No operation can be performed on Bluetooth Network Connection while it has its m edia disconnected No operation can be performed on Local Area Connection while it has its media di sconnected I don t know what to do now Please help Windows IP Configuration Host Name Username Primary Dns Suffix Node Type Hybrid IP Routing Enabled No WINS Proxy Enabled No Wireless LAN adapter Wireless Network Connection Media State Media disconnected Connection-specific DNS Suffix Description Microsoft Virtual WiFi Miniport Adapter Physical Address E - -FE- A-B - DHCP Enabled Yes Autoconfiguration Enabled Yes Wireless LAN adapter Wireless Network Connection Connection-specific DNS Suffix Description Atheros AR b g n WiFi Adapter Physical Address C - -FE- A-B - DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe d ca Preferred Autoconfiguration IPv Address Preferred Subnet Mask Default Unidentified Network Gateway DHCPv IAID DHCPv Client DUID - - - - - F-BD-FD- - A-B - F- -BC DNS Servers fec ffff fec ffff fec ffff NetBIOS over Tcpip Enabled Ethernet adapter Bluetooth Network Connection Media State Media disconnected Connection-specific DNS Suffix Description Bluetooth Device Personal Area Network Physical Address - - - -A -DA DHCP Enabled Yes Autoconfiguration Enabled Yes Ethernet adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Realtek PCIe FE Family Controller Physical Address - A-B - F- -BC DHCP Enabled Yes Autoconfiguration Enabled Yes Tunnel adapter isatap BEE - C- F F- -D B D BD Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter TO Adapter Media State Media disconnected Connection-specific DNS Suffix Description Microsoft to Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled YesAnd here s the ipconfig all just in case nbsp

A:Unidentified Network

Wireless? Your laptop isn't getting an IP address is the cause of your issues. Find out of the router has enough allocation.
 

http://www.techspot.com/community/topics/unidentified-network.198148/
Relevancy 20.64%

Hi

I have a printer
There is no lighting up
The power supply give
red wire about 7 V
blue wire about 11 V

Holding down the power button en stop/reset won't work

How can I test the logic board is defect?

Image logig board






Cheers
Harrie
 

http://www.techspot.com/community/topics/canon-printer-pixma-mp610-no-power-no-display.197978/
Relevancy 17.63%

Hi I What to fail my workgroup causes network have four pc s connected through a GX-D ASUS switch which is now a few years old Two of the pc s have just been upgraded to windows the other two are on windows Also into the switch goes my BT broadband router and my network hp printer n Suddenly I am losing the complete network during normal use Instead of having green lights on my switch one of them goes amber and another has no light on at all If I unplug the switch from the power and then power back up all the What causes my network workgroup to fail lights go orange What causes my network workgroup to fail and then turn to green and the network comes back on This has never happened before until today and it has happened twice really frustrating I am not very techy and think the switch has became faulty Should I go buy a new switch or might it be something else Need it explaining in layman terms please as I don t have a clue Thanks for your help nbsp

A:What causes my network workgroup to fail

Hi Shelley123. If your router has at least 4 Ethernet ports at the rear, there is no need for a switch as you have 4 pc's. If your "router" only has 1 Ethernet port, what you have is a modem. Normally, your Internet signal comes in and goes to a modem first, and if you have more than 1 pc or devices that need wireless connectivity,you would connect a wireless router to that single modem port and connect your 4 pc's to the 4 ports found on most routers.If you had at least 5 devices that need to be connected by Ethernet cable, you would use a switch which you would connect to one of your router's ports, then connect the fourth pc and any other Ethernet device to one of the 4 or more ports on the switch. Are you sure you are using a switch and not a hub? Could you tell us what other hardware you have in your network besides your 4 pc's which you connect by Ethernet cable?
 

http://www.techspot.com/community/topics/what-causes-my-network-workgroup-to-fail.197556/
Relevancy 17.2%

If I'm able to, how would I go about running a network hub from an existing port on the router?

I.E. Modem->Router->PCs/Hub->TV/PC

In theory I'm trying to run a wired connection to my room and have the ability to have my PC/TV and any other devices connected to the network physically, my wireless strength isn't exactly good and it's very inconsistent at best when it comes to my internet speeds makes it a bit harder to watch Netflix/Play games.

Any insight would be wonderful!
 

A:Question about a home network using a Linksys WRT54GS2

Modem > Router >

Then use a LAN port on the router to connect to a LAN port on the hub.
 

http://www.techspot.com/community/topics/question-about-a-home-network-using-a-linksys-wrt54gs2.197409/
Relevancy 17.63%

Networked for years in XP machines.

I read help files how to but, could not make it work.

My w8 win wxplorer list shows under Network the VISTA LAPTOP. When I click on it it asks for user name/password but, what name & password?.

I naver had any name/password for my networks.

Any body knows what does it refere to?
 

A:Failed to network w8, xp & vista

Hey nichos. Was a name and password used when this Win8 system was first set-up. When I first unpacked a WIN8 laptop, it threw me for a loop as it requires a username and password to unlock it.
 

http://www.techspot.com/community/topics/failed-to-network-w8-xp-vista.197366/
Relevancy 17.63%

I am stuck Also I apologize in advance if this is not in the right forum I am trying to work on a friend s Windows desktop PC Dell Inspiron at my house but I cannot connect to my home network or the internet to download network Cannot or to PC connect internet malware scanners removal tools updates to MBAM etc First I was trying with a wireless adapter that it known to be good The network sharing center would say it was connected to the network but there was no internet connection Then I tried plugging in an Ethernet cable The network sharing center just kept saying quot searching for network quot but never would connect I tried disabling then re-enabling the network adaptor and I reinstalled the driver Networking is not my strong suit so is there some setting I may be overlooking It appears the PC on which I am working is already part of a homegroup do I need to leave that group then try to join my existing one set up through my own Win amp PC I don t care about sharing files across Cannot connect PC to network or internet the network in fact I prefer not to in case this thing really is infected I just want internet access on this machine Could some sort of malware be blocking access I sort of doubt this since it was working fine at their home before they brought it to me I could not find any router settings or firewall entries that appeared to be blocking access ZyXEL PK Z DSL modem router provided by CenturyLink Do I need to call my ISP tomorrow Thanks again this community has always been helpful to me nbsp

A:Cannot connect PC to network or internet

Make sure the adaptor isn't set to 'share connection'.

Try using a static IP.
 

http://www.techspot.com/community/topics/cannot-connect-pc-to-network-or-internet.197294/
Relevancy 17.63%

I have started to route CAT e cable to make a wired network I have a server running Server a custom desktop running windows laptops running windows I have the modem and the wireless router in issues to connecting network Having a server the library I have the modem connected to the internet port of the router and one of the loads is connected to a wall jack that Having issues connecting a server to network connects to a cable that runs about feet to its termination This termination is connected to a Having issues connecting a server to network port switch Having issues connecting a server to network The server is connected to the switch directly Based on my understanding my server should have access to the internet and my network should have access to my server With this setup I have full internet access on every machine but the server and I cannot access the server from any computer I have hooked up the server to a second wireless router as a load and was able to successfully access it through the second router but there is no internet The network on the server shows up as Unidentified Limited Access when directly connected to the switch Has anyone seen this before or have an idea to fix this issue nbsp

A:Having issues connecting a server to network

Load? It'd be easier if you drew a diagram. Some of the info is missing.
 

http://www.techspot.com/community/topics/having-issues-connecting-a-server-to-network.197147/
Relevancy 17.2%

Hello,
recently my old router died, so I bought the new one. I connected it to my PC, entered my ISP information. It's working, but kinda slowly. My ISP speed used to be 10MB/s, but now I'm downloading torrents only with 1MB/s. Task manager shows that network is used by 10% since I have my adapers speed and duplex set to auto negotation. Do you have any ideas how to fix this?
EDIT: I use cable connection.
 

A:New router slow down speed

Disable QoS on the router and the PC
 

http://www.techspot.com/community/topics/new-router-slow-down-speed.196808/
Relevancy 16.77%

I have a laptop on new Internet Slow browsing new laptop a Samsung NP V AH Core i GB RAM GB NVIDIA and -bit Windows Home Premium It works perfectly fine Slow Internet browsing on new laptop but internet browsing is extremely slow This is specifically the wireless browsing that s slow When I connect with a cable it s much faster I have a fast internet connection that Slow Internet browsing on new laptop works great on wireless with my other even older laptops but for some reason Slow Internet browsing on new laptop it s slow on this one It makes no difference if there are no other devices connected whether I m close to the router or not what the signals are like - it s slow anyways I have a Dlink router DIR- and I ve called the Dlink people about this but besides minor adjustments in the router settings they can t do much considering other devices work just fine I ve tried a router reset to no avail I ve tried Mozilla and Google Chrome as well but changing browsers doesn t make a difference either I m running Norton Internet Security Any help I could get on this would be greatly appreciated nbsp

A:Slow Internet browsing on new laptop

Is the speeds slow on other wireless connections? Such as a friends or even a public Hot Spot? It could be a problem with your wireless adapter integrated within your laptop. Especially since your hardline connection seems to work fine. That leads me to believe its nothing wrong with your network and the problem lies within your laptop. Make sure it has the proper drivers installed and it isn't malfunctioning in anyway. In WIN7 there is a way to have the OS diagnose any potential problems within a adapter. I recommend trying that as well and reporting back here with the results.

**Edit : Also, try disabling Norton and see if your speeds improve.
 

http://www.techspot.com/community/topics/slow-internet-browsing-on-new-laptop.183709/
Relevancy 19.78%

Well my cpu usage goes up to anything CPU whenever 100% open I usage or run whenever I open anything explorer or fire fox or when I try to install a program that s my pc Processor Inter R Pentium R CPU GHz GHz Installed memory GB Display adapter Nvidia Geforce GS I 100% CPU usage whenever I open or run anything tried the next but didn t succeed 100% CPU usage whenever I open or run anything to solve the problem - performed an virus scan using kaspersky and Avira - performed spyware scan using spyware doctor - performed malware scan using Malwarebytes Anti-Malware - reinstalled the OS several times tried windows seven ultimate and bit and windows xp sp bit - formatted my hard disk then installed a fresh copy of windows - checked the CPU temperature and made sure it s fine - tried removing one of my rams - tried working with the build-in VGA card instead of the nvidia one - tried restoring the BIOS default setting - even tried changing the processor itself but with an older one - and of course tried to see which progress sucks up the cpu usage and the result is that every program I open gets to of the cpu usage and yet I couldn t solve this problem wonder if any of u can help me thanks in advance nbsp

A:100% CPU usage whenever I open or run anything

Rick said:





In the Task Manager, if you were to click "Performance" and then enable "Show Kernel Times" under the "View" menu, what do you see? There should be a red line which indicates kernel times. If the line is abnormally high, then that's a good clue this could be driver related or hardware related.Click to expand...

Thanks for your reply!

I don't know if that's abnormal or not, but you can check that photo and see

sorry I couldn't post it as an image.
 

http://www.techspot.com/community/topics/100-cpu-usage-whenever-i-open-or-run-anything.163635/
Relevancy 17.63%

Hi I'm new to this site and I'm hoping I can find some answers here. My PCI-e Wifi adapter is working, and I'm able to connect to a wireless access point fine. But when I open my browser and go to google, it will not load. And evetually it says "No network connection."
However, if I plug a different adapter in, everything works perfectly fine.
One weird thing about the first adapter is that sometimes if I refresh the router, it will connect for like five seconds. Then stop working again. The device is fine, and system tray icon for wireless has no warning or disable indication.
 

A:Network card working but no internet

Power cycle the modem
unplug the router from ac and modem and wait for the router lights to flash and are ready
Power on the router and connect it to the modem
Go into the router and make sure under WAN (internet) it gets the DNS from the ISP there should be two of them listed. If you see 0.0.0. or 192.168.x.x then the Router is not communicating correctly with the modem.

If you see this the router would need a factory reset and re-run the setup again.
If all looks good but it's the PC that not connecting

Open up a dos session prompt run as Admin

Under dos prompt
type: ipconfig /flushdns

or



ipconfig /flushdns
nbtstat -R
netsh int reset all
netsh int ip reset
netsh winsock reset
sc stop Dhcp
sc start Dhcp
sc stop Dnscache
sc start Dnscache

reboot your PC
 

http://www.techspot.com/community/topics/network-card-working-but-no-internet.196381/
Relevancy 17.63%

Hey all After shutting down my laptop running Vista the Unidentified Internet no network, connectivity next day I couldn t connect to the internet It connects to the network but says Unidentified network, no Internet connectivity quot unidentified network quot and there is no Unidentified network, no Internet connectivity internet connectivity Now another laptop in my house connects the network fine and internet is working perfectly So it is this laptop causing hassles I don t want to presume but it may have something to do with uninstalling AVG I tried to Unidentified network, no Internet connectivity install AVG day trial and the install failed for some reason I thought it might be some problem to do with older previous AVG versions on the laptop There was no AVG on the add remove programs function in control panel but after seeing bits of AVG over the C drive I downloaded and used AppRemover to completely remove AVG It found AVG or I can t remember exactly and I uninstalled it with that I hibernated the computer a few times and think this was the first time I had shut down the pc since finishing this uninstall Next time I booted up my internet connectivity doesn t seem to be working Just speculating on what the cause of the problem is so am open to any suggestions grinthumb Any help with this would be amazing grinthumb nbsp

A:Unidentified network, no Internet connectivity

Try CCleaner and do a registry sweep.
 

http://www.techspot.com/community/topics/unidentified-network-no-internet-connectivity.178319/
Relevancy 17.2%

I have a T line at the small school I work at maximum of computers I ran line work T1 very at slow a speed test and received a Mbps I ran the same test at home and received a Mbps on a cable connection When T1 line very slow at work I ran the test at work there were only other people on a computer The school pays for the T line Part of that could be payment for actually running the line I think the connection hub was miles away We are in a remote part of PA so future options could be limited From what I know the overall Mbps is So if we have computers on the network does it work like this Mbps Mbps each Is T that slow I thought T was a good connection Has it just become old and outdated Why is it that years ago schools with hundreds of computers ran seamlessly on T and we can t run a maximum of computers on it now nbsp

A:T1 line very slow at work

You should be asking your ISP these questions.

I'm not absolutely positive, but I will state my two cents. I think all the machines on the network uses what is known as timeshare. If only one machine needs access then all the bandwidth is alloted to this one machine. But if two machines need access, time is shared between the two machines. Timeshare is split between machines making data request. Once a machine is no longer sending data request, there is no need in timeshare being alloted for the machine. In other words there is no specific set speed for each machine on the network. Network traffic is controlled by how many machines are making network request at any given time.





Hallo104 said:





Why is it that 10 years ago schools with hundreds of computers ran seamlessly on T1 and we can't run a maximum of 30 computers on it now?Click to expand...

This phenomenon you mention is the Internet evolving and requiring more bandwidth as it progresses. The Internet 10 years ago wasn't bloated with as many high bandwidth websites. Dial-up was probably still common and fully functional back then. I'd hate to even make a connection with Dial-up now, it would probably take 4 minutes, for a single web-page to render.
 

http://www.techspot.com/community/topics/t1-line-very-slow-at-work.195746/
Relevancy 16.34%

Hi I m trying to play warcraft with my friend and we just got a problem which can be solved through portforwading And so I did it But still my PFPortChecker keeps telling me the messege quot Your port is not open or not reachable quot So I don t know what I did wrong I have only one router I checked it with some program which can tell me if there is a router covering my router I ve opened the settings of my router got into Virtual Servers created new chosen ports in range - applied to all tcp and udp confirmed It looks like its working but its not I ve got my firewall turned off and even so I added rules there for those ports I even turned off my antivirus Still its not working - just saying that its not open or not reachable Any ideas I ll appreciate any help and sorry for my grammar I m not from english speaking country so there might be a lot of mistakes nbsp

A:"Your port is not open or not reachable."

Okay what are we working with here?

OS?
Router?
System Specs?
System OC?
System Tweaked to the Max?
System Ports Changed or on defaults? Meaning you haven't changed anything only on the Router.
Under Services.msc did you set the UPnP to auto/start/enable

In the Router make sure you have the system set to the Port you want open and IP address should be Reserved by mac address of the NIC.

Are we using any other layered firewall software?
Are you using a Proxy?
Are you using Private Browsing?

What firewall are you using on PC?
 

http://www.techspot.com/community/topics/your-port-is-not-open-or-not-reachable.195947/
Relevancy 17.63%

HP Pavillion with Windows Vista
Using a Diamond 300 mbps Wireless Repeater
Netgear Wireless Dualband Router N600 WNDR3400v2

When attempting to open IE, a popup opens that says:
Connect to 10.0.10.254
The server 10.0.10.254 at GoAhead requires a username and password.
Warning: This server is requesting that your username and password be sent in an insecure manner (basic authentication without a secure connection).
User name:
Password:
and OK and Cancel

In device manager, computer doesn't recognize a wireless device.
It displays NVIDIA nForce 10/100 mbps Ethernet but nothing else.

Other devices (laptop,Ipad) can connect to the wireless in the home.
Internet provider says it is not on their end.

Can someone please offer some advice on how to resolve this issue.

Thank you
 

A:Desktop Wireless network not connecting

Go to Device Manager, find the wireless adaptor. It should have a yellow ! symbol next to it.

Post details here, then you need to install the drivers for it.
 

http://www.techspot.com/community/topics/desktop-wireless-network-not-connecting.195589/
Relevancy 19.35%

When I connect my external hard drive to my computer it is recognized and shows up and everything but for some reason it can't be opened. This problem started after my brother put some wii games in there and connected it to the Wii...

I clicked on properties and it reads 0 bytes so nothing is detected when I scan it for viruses. (finishes after 5 seconds)

Even though it shows 0 bytes it still has all the data cause after this, I connected it on my wii and it has the games and on blu ray and it shows every video and photo I put in there, it's just a problem with windows...

I don't want to format it because I have like 5000 photos from trips with my family and also some pretty important documents from my dad's work.
 

A:Maxell HDD shows up but won't open

I found the answer! The Boot sector was damaged and Windows before looking for the information on the hard drive it looks for this sector. So all I had to do was to get a Linux computer and it was able to open it, it would have also worked with a Mac. Didn't lose any file I had in there.
 

http://www.techspot.com/community/topics/maxell-hdd-shows-up-but-wont-open.195674/